New Way to Break Down Barriers to Higher Education: Build "Financial Capabilities"

ERIC Educational Resources Information Center

Savage, Sarah; Graves, Erin M.

2015-01-01

Community colleges have traditionally responded to the financial needs of their students by removing or minimizing financial barriers to attending. Efforts to make community college tuition free fit with this philosophy, but where efforts to minimize or remove financial barriers to attending community college fall short is in empowering students…

Case outsourcing medical device reprocessing.

PubMed

Haley, Deborah

2004-04-01

IN THE INTEREST OF SAVING MONEY, many hospitals are considering extending the life of some single-use medical devices by using medical device reprocessing programs. FACILITIES OFTEN LACK the resources required to meet the US Food and Drug Administration's tough quality assurance standards. BY OUTSOURCING, hospitals can reap the benefits of medical device reprocessing without assuming additional staffing and compliance burdens. OUTSOURCING enables hospitals to implement a medical device reprocessing program quickly, with no capital investment and minimal effort.

Inferring the Minimal Genome of Mesoplasma florum by Comparative Genomics and Transposon Mutagenesis.

PubMed

Baby, Vincent; Lachance, Jean-Christophe; Gagnon, Jules; Lucier, Jean-François; Matteau, Dominick; Knight, Tom; Rodrigue, Sébastien

2018-01-01

The creation and comparison of minimal genomes will help better define the most fundamental mechanisms supporting life. Mesoplasma florum is a near-minimal, fast-growing, nonpathogenic bacterium potentially amenable to genome reduction efforts. In a comparative genomic study of 13 M. florum strains, including 11 newly sequenced genomes, we have identified the core genome and open pangenome of this species. Our results show that all of the strains have approximately 80% of their gene content in common. Of the remaining 20%, 17% of the genes were found in multiple strains and 3% were unique to any given strain. On the basis of random transposon mutagenesis, we also estimated that ~290 out of 720 genes are essential for M. florum L1 in rich medium. We next evaluated different genome reduction scenarios for M. florum L1 by using gene conservation and essentiality data, as well as comparisons with the first working approximation of a minimal organism, Mycoplasma mycoides JCVI-syn3.0. Our results suggest that 409 of the 473 M. mycoides JCVI-syn3.0 genes have orthologs in M. florum L1. Conversely, 57 putatively essential M. florum L1 genes have no homolog in M. mycoides JCVI-syn3.0. This suggests differences in minimal genome compositions, even for these evolutionarily closely related bacteria. IMPORTANCE The last years have witnessed the development of whole-genome cloning and transplantation methods and the complete synthesis of entire chromosomes. Recently, the first minimal cell, Mycoplasma mycoides JCVI-syn3.0, was created. Despite these milestone achievements, several questions remain to be answered. For example, is the composition of minimal genomes virtually identical in phylogenetically related species? On the basis of comparative genomics and transposon mutagenesis, we investigated this question by using an alternative model, Mesoplasma florum, that is also amenable to genome reduction efforts. Our results suggest that the creation of additional minimal genomes could help reveal different gene compositions and strategies that can support life, even within closely related species.

Load emphasizes muscle effort minimization during selection of arm movement direction

PubMed Central

2012-01-01

Background Directional preferences during center-out horizontal shoulder-elbow movements were previously established for both the dominant and non-dominant arm with the use of a free-stroke drawing task that required random selection of movement directions. While the preferred directions were mirror-symmetrical in both arms, they were attributed to a tendency specific for the dominant arm to simplify control of interaction torque by actively accelerating one joint and producing largely passive motion at the other joint. No conclusive evidence has been obtained in support of muscle effort minimization as a contributing factor to the directional preferences. Here, we tested whether distal load changes directional preferences, making the influence of muscle effort minimization on the selection of movement direction more apparent. Methods The free-stroke drawing task was performed by the dominant and non-dominant arm with no load and with 0.454 kg load at the wrist. Motion of each arm was limited to rotation of the shoulder and elbow in the horizontal plane. Directional histograms of strokes produced by the fingertip were calculated to assess directional preferences in each arm and load condition. Possible causes for directional preferences were further investigated by studying optimization across directions of a number of cost functions. Results Preferences in both arms to move in the diagonal directions were revealed. The previously suggested tendency to actively accelerate one joint and produce passive motion at the other joint was supported in both arms and load conditions. However, the load increased the tendency to produce strokes in the transverse diagonal directions (perpendicular to the forearm orientation) in both arms. Increases in required muscle effort caused by the load suggested that the higher frequency of movements in the transverse directions represented increased influence of muscle effort minimization on the selection of movement direction. This interpretation was supported by cost function optimization results. Conclusions While without load, the contribution of muscle effort minimization was minor, and therefore, not apparent, the load revealed this contribution by enhancing it. Unlike control of interaction torque, the revealed tendency to minimize muscle effort was independent of arm dominance. PMID:23035925

Technology transfer into the solid propulsion industry

NASA Technical Reports Server (NTRS)

Campbell, Ralph L.; Thomson, Lawrence J.

1995-01-01

This paper is a survey of the waste minimization efforts of industries outside of aerospace for possible applications in the manufacture of solid rocket motors (SRM) for NASA. The Redesigned Solid Rocket Motor (RSRM) manufacturing plan was used as the model for processes involved in the production of an SRM. A literature search was conducted to determine the recycling, waste minimization, and waste treatment methods used in the commercial sector that might find application in SRM production. Manufacturers, trade organizations, and professional associations were also contacted. Waste minimization efforts for current processes and replacement technologies, which might reduce the amount or severity of the wastes generated in SRM production, were investigated. An overview of the results of this effort are presented in this paper.

Biomechanical energy harvesting: generating electricity during walking with minimal user effort.

PubMed

Donelan, J M; Li, Q; Naing, V; Hoffer, J A; Weber, D J; Kuo, A D

2008-02-08

We have developed a biomechanical energy harvester that generates electricity during human walking with little extra effort. Unlike conventional human-powered generators that use positive muscle work, our technology assists muscles in performing negative work, analogous to regenerative braking in hybrid cars, where energy normally dissipated during braking drives a generator instead. The energy harvester mounts at the knee and selectively engages power generation at the end of the swing phase, thus assisting deceleration of the joint. Test subjects walking with one device on each leg produced an average of 5 watts of electricity, which is about 10 times that of shoe-mounted devices. The cost of harvesting-the additional metabolic power required to produce 1 watt of electricity-is less than one-eighth of that for conventional human power generation. Producing substantial electricity with little extra effort makes this method well-suited for charging powered prosthetic limbs and other portable medical devices.

To do it or to let an automatic tool do it? The priority of control over effort.

PubMed

Osiurak, François; Wagner, Clara; Djerbi, Sara; Navarro, Jordan

2013-01-01

The aim of the present study is to provide experimental data relevant to the issue of what leads humans to use automatic tools. Two answers can be offered. The first is that humans strive to minimize physical and/or cognitive effort (principle of least effort). The second is that humans tend to keep their perceived control over the environment (principle of more control). These two factors certainly play a role, but the question raised here is to what do people give priority in situations wherein both manual and automatic actions take the same time - minimizing effort or keeping perceived control? To answer that question, we built four experiments in which participants were confronted with a recurring choice between performing a task manually (physical effort) or in a semi-automatic way (cognitive effort) versus using an automatic tool that completes the task for them (no effort). In this latter condition, participants were required to follow the progression of the automatic tool step by step. Our results showed that participants favored the manual or semi-automatic condition over the automatic condition. However, when they were offered the opportunity to perform recreational tasks in parallel, the shift toward manual condition disappeared. The findings give support to the idea that people give priority to keeping control over minimizing effort.

DebriSat Fragment Characterization System and Processing Status

NASA Technical Reports Server (NTRS)

Rivero, M.; Shiotani, B.; M. Carrasquilla; Fitz-Coy, N.; Liou, J. C.; Sorge, M.; Huynh, T.; Opiela, J.; Krisko, P.; Cowardin, H.

2016-01-01

The DebriSat project is a continuing effort sponsored by NASA and DoD to update existing break-up models using data obtained from hypervelocity impact tests performed to simulate on-orbit collisions. After the impact tests, a team at the University of Florida has been working to characterize the fragments in terms of their mass, size, shape, color and material content. The focus of the post-impact effort has been the collection of 2 mm and larger fragments resulting from the hypervelocity impact test. To date, in excess of 125K fragments have been recovered which is approximately 40K more than the 85K fragments predicted by the existing models. While the fragment collection activities continue, there has been a transition to the characterization of the recovered fragments. Since the start of the characterization effort, the focus has been on the use of automation to (i) expedite the fragment characterization process and (ii) minimize the effects of human subjectivity on the results; e.g., automated data entry processes were developed and implemented to minimize errors during transcription of the measurement data. At all steps of the process, however, there is human oversight to ensure the integrity of the data. Additionally, repeatability and reproducibility tests have been developed and implemented to ensure that the instrumentations used in the characterization process are accurate and properly calibrated.

A Low Cost GPS System for Real-Time Tracking of Sounding Rockets

NASA Technical Reports Server (NTRS)

Markgraf, M.; Montenbruck, O.; Hassenpflug, F.; Turner, P.; Bull, B.; Bauer, Frank (Technical Monitor)

2001-01-01

In an effort to minimize the need for costly, complex, tracking radars, the German Space Operations Center has set up a research project for GPS based tracking of sounding rockets. As part of this project, a GPS receiver based on commercial technology for terrestrial applications has been modified to allow its use under the highly dynamical conditions of a sounding rocket flight. In addition, new antenna concepts are studied as an alternative to proven but costly wrap-around antennas.

Energy minimization on manifolds for docking flexible molecules

PubMed Central

Mirzaei, Hanieh; Zarbafian, Shahrooz; Villar, Elizabeth; Mottarella, Scott; Beglov, Dmitri; Vajda, Sandor; Paschalidis, Ioannis Ch.; Vakili, Pirooz; Kozakov, Dima

2015-01-01

In this paper we extend a recently introduced rigid body minimization algorithm, defined on manifolds, to the problem of minimizing the energy of interacting flexible molecules. The goal is to integrate moving the ligand in six dimensional rotational/translational space with internal rotations around rotatable bonds within the two molecules. We show that adding rotational degrees of freedom to the rigid moves of the ligand results in an overall optimization search space that is a manifold to which our manifold optimization approach can be extended. The effectiveness of the method is shown for three different docking problems of increasing complexity. First we minimize the energy of fragment-size ligands with a single rotatable bond as part of a protein mapping method developed for the identification of binding hot spots. Second, we consider energy minimization for docking a flexible ligand to a rigid protein receptor, an approach frequently used in existing methods. In the third problem we account for flexibility in both the ligand and the receptor. Results show that minimization using the manifold optimization algorithm is substantially more efficient than minimization using a traditional all-atom optimization algorithm while producing solutions of comparable quality. In addition to the specific problems considered, the method is general enough to be used in a large class of applications such as docking multidomain proteins with flexible hinges. The code is available under open source license (at http://cluspro.bu.edu/Code/Code_Rigtree.tar), and with minimal effort can be incorporated into any molecular modeling package. PMID:26478722

A Selective Role for Dopamine in Learning to Maximize Reward But Not to Minimize Effort: Evidence from Patients with Parkinson's Disease.

PubMed

Skvortsova, Vasilisa; Degos, Bertrand; Welter, Marie-Laure; Vidailhet, Marie; Pessiglione, Mathias

2017-06-21

Instrumental learning is a fundamental process through which agents optimize their choices, taking into account various dimensions of available options such as the possible reward or punishment outcomes and the costs associated with potential actions. Although the implication of dopamine in learning from choice outcomes is well established, less is known about its role in learning the action costs such as effort. Here, we tested the ability of patients with Parkinson's disease (PD) to maximize monetary rewards and minimize physical efforts in a probabilistic instrumental learning task. The implication of dopamine was assessed by comparing performance ON and OFF prodopaminergic medication. In a first sample of PD patients ( n = 15), we observed that reward learning, but not effort learning, was selectively impaired in the absence of treatment, with a significant interaction between learning condition (reward vs effort) and medication status (OFF vs ON). These results were replicated in a second, independent sample of PD patients ( n = 20) using a simplified version of the task. According to Bayesian model selection, the best account for medication effects in both studies was a specific amplification of reward magnitude in a Q-learning algorithm. These results suggest that learning to avoid physical effort is independent from dopaminergic circuits and strengthen the general idea that dopaminergic signaling amplifies the effects of reward expectation or obtainment on instrumental behavior. SIGNIFICANCE STATEMENT Theoretically, maximizing reward and minimizing effort could involve the same computations and therefore rely on the same brain circuits. Here, we tested whether dopamine, a key component of reward-related circuitry, is also implicated in effort learning. We found that patients suffering from dopamine depletion due to Parkinson's disease were selectively impaired in reward learning, but not effort learning. Moreover, anti-parkinsonian medication restored the ability to maximize reward, but had no effect on effort minimization. This dissociation suggests that the brain has evolved separate, domain-specific systems for instrumental learning. These results help to disambiguate the motivational role of prodopaminergic medications: they amplify the impact of reward without affecting the integration of effort cost. Copyright © 2017 the authors 0270-6474/17/376087-11$15.00/0.

Additional Developments in Atmosphere Revitalization Modeling and Simulation

NASA Technical Reports Server (NTRS)

Coker, Robert F.; Knox, James C.; Cummings, Ramona; Brooks, Thomas; Schunk, Richard G.

2013-01-01

NASA's Advanced Exploration Systems (AES) program is developing prototype systems, demonstrating key capabilities, and validating operational concepts for future human missions beyond Earth orbit. These forays beyond the confines of earth's gravity will place unprecedented demands on launch systems. They must launch the supplies needed to sustain a crew over longer periods for exploration missions beyond earth's moon. Thus all spacecraft systems, including those for the separation of metabolic carbon dioxide and water from a crewed vehicle, must be minimized with respect to mass, power, and volume. Emphasis is also placed on system robustness both to minimize replacement parts and ensure crew safety when a quick return to earth is not possible. Current efforts are focused on improving the current state-of-the-art systems utilizing fixed beds of sorbent pellets by evaluating structured sorbents, seeking more robust pelletized sorbents, and examining alternate bed configurations to improve system efficiency and reliability. These development efforts combine testing of sub-scale systems and multi-physics computer simulations to evaluate candidate approaches, select the best performing options, and optimize the configuration of the selected approach. This paper describes the continuing development of atmosphere revitalization models and simulations in support of the Atmosphere Revitalization Recovery and Environmental Monitoring (ARREM)

Numerical simulation of residual stress in laser based additive manufacturing process

NASA Astrophysics Data System (ADS)

Kalyan Panda, Bibhu; Sahoo, Seshadev

2018-03-01

Minimizing the residual stress build-up in metal-based additive manufacturing plays a pivotal role in selecting a particular material and technique for making an industrial part. In beam-based additive manufacturing, although a great deal of effort has been made to minimize the residual stresses, it is still elusive how to do so by simply optimizing the processing parameters, such as beam size, beam power, and scan speed. Amid different types of additive manufacturing processes, Direct Metal Laser Sintering (DMLS) process uses a high-power laser to melt and sinter layers of metal powder. The rapid solidification and heat transfer on powder bed endows a high cooling rate which leads to the build-up of residual stresses, that will affect the mechanical properties of the build parts. In the present work, the authors develop a numerical thermo-mechanical model for the measurement of residual stress in the AlSi10Mg build samples by using finite element method. Transient temperature distribution in the powder bed was assessed using the coupled thermal to structural model. Subsequently, the residual stresses were estimated with varying laser power. From the simulation result, it found that the melt pool dimensions increase with increasing the laser power and the magnitude of residual stresses in the built part increases.

Iodine addition using triiodide solutions

NASA Technical Reports Server (NTRS)

Rutz, Jeffrey A.; Muckle, Susan V.; Sauer, Richard L.

1992-01-01

The study develops: a triiodide solution for use in preparing ground service equipment (GSE) water for Shuttle support, an iodine dissolution method that is reliable and requires minimal time and effort to prepare, and an iodine dissolution agent with a minimal concentration of sodium salt. Sodium iodide and hydriodic acid were both found to dissolve iodine to attain the desired GSE iodine concentrations of 7.5 +/- 2.5 mg/L and 25 +/- 5 mg/L. The 1.75:1 and 2:1 sodium iodide solutions produced higher iodine recoveries than the 1.2:1 hydriodic acid solution. A two-hour preparation time is required for the three sodium iodide solutions. The 1.2:1 hydriodic acid solution can be prepared in less than 5 min. Two sodium iodide stock solutions (2.5:1 and 2:1) were found to dissolve iodine without undergoing precipitation.

Quadratic Programming for Allocating Control Effort

NASA Technical Reports Server (NTRS)

Singh, Gurkirpal

2005-01-01

A computer program calculates an optimal allocation of control effort in a system that includes redundant control actuators. The program implements an iterative (but otherwise single-stage) algorithm of the quadratic-programming type. In general, in the quadratic-programming problem, one seeks the values of a set of variables that minimize a quadratic cost function, subject to a set of linear equality and inequality constraints. In this program, the cost function combines control effort (typically quantified in terms of energy or fuel consumed) and control residuals (differences between commanded and sensed values of variables to be controlled). In comparison with prior control-allocation software, this program offers approximately equal accuracy but much greater computational efficiency. In addition, this program offers flexibility, robustness to actuation failures, and a capability for selective enforcement of control requirements. The computational efficiency of this program makes it suitable for such complex, real-time applications as controlling redundant aircraft actuators or redundant spacecraft thrusters. The program is written in the C language for execution in a UNIX operating system.

Technology Assessment for Future MILSATCOM Systems; An Update of the EHF Bands

DTIC Science & Technology

1980-10-01

converging these efforts, the MSO has prepared a "Technology Development Program Plan" ( TDPP ). The TOPP defines a coordinated approach to the R&D...required to insure the availability of the technology necessary to support future systems. Some of the objectives of the TDPP are: to minimize...and TDPP have illuminated the need for technology development efforts directed toward minimizing the cost- risk and schedule-risk, and insuring the

Considerations on the use of elastic wheels to the urban transport vehicles

NASA Astrophysics Data System (ADS)

Sebesan, Ioan; Arsene, Sorin; Manea, Ion

2018-03-01

To minimize dynamic wheel-rail interaction efforts a condition is that the unassembled mass of the vehicle is as small as possible. The elastic wheel by its construction fulfills these conditions - she has interposed between the crown and the body of the wheel, the elastic rubber elements. In this way, it can be considered that the unsupported mass is represented only by the mass of the wheel crown. Additionally, this elasticity also has a reduction effect on rolling noise. This feature makes it suitable for use on urban transport vehicles.

Resource Balancing Control Allocation

NASA Technical Reports Server (NTRS)

Frost, Susan A.; Bodson, Marc

2010-01-01

Next generation aircraft with a large number of actuators will require advanced control allocation methods to compute the actuator commands needed to follow desired trajectories while respecting system constraints. Previously, algorithms were proposed to minimize the l1 or l2 norms of the tracking error and of the control effort. The paper discusses the alternative choice of using the l1 norm for minimization of the tracking error and a normalized l(infinity) norm, or sup norm, for minimization of the control effort. The algorithm computes the norm of the actuator deflections scaled by the actuator limits. Minimization of the control effort then translates into the minimization of the maximum actuator deflection as a percentage of its range of motion. The paper shows how the problem can be solved effectively by converting it into a linear program and solving it using a simplex algorithm. Properties of the algorithm are investigated through examples. In particular, the min-max criterion results in a type of resource balancing, where the resources are the control surfaces and the algorithm balances these resources to achieve the desired command. A study of the sensitivity of the algorithms to the data is presented, which shows that the normalized l(infinity) algorithm has the lowest sensitivity, although high sensitivities are observed whenever the limits of performance are reached.

WASTE MINIMIZATION ASSESSMENT FOR A MANUFACTURER OF SHEET METAL COMPONENTS

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. n an effort to assist these manufacturers Waste Minimization ssessment Cente...

ENVIRONMENTAL RESEARCH BRIEF: WASTE MINIMIZATION FOR A MANUFACTURER OF ALUMINUM AND STEEL PARTS

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. n an effort to assist these manufacturers Waste Minimization Assessment Cent...

WASTE MINIMIZATION ASSESSMENT FOR A MANUFACTURER OF ALUMINUM AND STEEL PARTS

EPA Science Inventory

The U.S.Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-sized manufacturers who want to minimize their generation of waste but who lack the expertise to do so. In an effort to assist these manufacturers, Waste Minimization Assessment Ce...

WASTE MINIMIZATION ASSESSMENT FOR A MANUFACTURER OF CORN SYRUP AND CORN STARCH

EPA Science Inventory

The U.S.Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-size manufacturers who want to minimize their geneation of waste but who lack the expertise to do so. In an effort to assist these manufacturers, Waste Minimization Assessment Cent...

WASTE MINIMIZATION ASSESSMENT FOR A MANUFACTURER OF CUTTING AND WELDING EQUIPMENT

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot program to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so in an effort to assist these manufacturers Waste Minimization Assessment Cent...

WASTE MINIMIZATION ASSESSMENT FOR A MANUFACTURER OF SILICON-CONTROLLED RECTIFIERS AND SCHOTTKY RECTIFIERS

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small- and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. In an effort to assist these manufacturers Waste Minimization Assessment Ce...

Minimizing damage to a propped fracture by controlled flowback procedures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Robinson, B.M.; Holditch, S.A.; Whitehead, W.S.

1988-06-01

Severe fracture-conductivity damage can result from proppant crushing and/or proppant flowback into the wellbore. Such damage is often concentrated near the wellbore and can directly affect postfracture performance. Most of the time severe fracture-conductivity damage can be minimized by choosing the correct type of proppant for a particular well. In many cases, however, this is not enough. To minimize excessive crushing or to prevent proppant flowback, it is also necessary to control carefully the flowback of the well after the treatment. Specific procedures can be followed to minimize severe fracture-conductivity damage. These procedures involve controlling the rates at which loadmore » fluids are recovered and maximizing backpressure against the formation. These procedures require much more time and effort than is normally spent on postfracture cleanup; however, the efforts could result in better performance.« less

Minimizing opportunity costs to aquatic connectivity restoration while controlling an invasive species.

PubMed

Milt, Austin W; Diebel, Matthew W; Doran, Patrick J; Ferris, Michael C; Herbert, Matthew; Khoury, Mary L; Moody, Allison T; Neeson, Thomas M; Ross, Jared; Treska, Ted; O'Hanley, Jesse R; Walter, Lisa; Wangen, Steven R; Yacobson, Eugene; McIntyre, Peter B

2018-03-08

Controlling invasive species is critical for conservation but can have unintended consequences for native species and divert resources away from other efforts. This dilemma occurs on a grand scale in the North American Great Lakes, where dams and culverts block tributary access to habitat of desirable fish species and are a lynchpin of long-standing efforts to limit ecological damage inflicted by the invasive, parasitic sea lamprey (Petromyzon marinus). Habitat restoration and sea-lamprey control create conflicting goals for managing aging infrastructure. We used optimization to minimize opportunity costs of habitat gains for 37 desirable migratory fishes that arose from restricting sea lamprey access (0-25% increase) when selecting barriers for removal under a limited budget (US$1-105 million). Imposing limits on sea lamprey habitat reduced gains in tributary access for desirable species by 15-50% relative to an unconstrained scenario. Additional investment to offset the effect of limiting sea-lamprey access resulted in high opportunity costs for 30 of 37 species (e.g., an additional US$20-80 million for lake sturgeon [Acipenser fulvescens]) and often required ≥5% increase in sea-lamprey access to identify barrier-removal solutions adhering to the budget and limiting access. Narrowly distributed species exhibited the highest opportunity costs but benefited more at less cost when small increases in sea-lamprey access were allowed. Our results illustrate the value of optimization in limiting opportunity costs when balancing invasion control against restoration benefits for diverse desirable species. Such trade-off analyses are essential to the restoration of connectivity within fragmented rivers without unleashing invaders. © 2018 Society for Conservation Biology.

Waste reduction plan for The Oak Ridge National Laboratory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schultz, R.M.

1990-04-01

The Oak Ridge National Laboratory (ORNL) is a multipurpose Research and Development (R D) facility. These R D activities generate numerous small waste streams. Waste minimization is defined as any action that minimizes the volume or toxicity of waste by avoiding its generation or recycling. This is accomplished by material substitution, changes to processes, or recycling wastes for reuse. Waste reduction is defined as waste minimization plus treatment which results in volume or toxicity reduction. The ORNL Waste Reduction Program will include both waste minimization and waste reduction efforts. Federal regulations, DOE policies and guidelines, increased costs and liabilities associatedmore » with the management of wastes, limited disposal options and facility capacities, and public consciousness have been motivating factors for implementing comprehensive waste reduction programs. DOE Order 5820.2A, Section 3.c.2.4 requires DOE facilities to establish an auditable waste reduction program for all LLW generators. In addition, it further states that any new facilities, or changes to existing facilities, incorporate waste minimization into design considerations. A more recent DOE Order, 3400.1, Section 4.b, requires the preparation of a waste reduction program plan which must be reviewed annually and updated every three years. Implementation of a waste minimization program for hazardous and radioactive mixed wastes is sited in DOE Order 5400.3, Section 7.d.5. This document has been prepared to address these requirements. 6 refs., 1 fig., 2 tabs.« less

Additively Manufactured Combustion Devices Components for LOX/Methane Applications

NASA Technical Reports Server (NTRS)

Greene, Sandra Elam; Protz, Christopher; Garcia, Chance; Goodman, Dwight; Baker, Kevin

2016-01-01

Marshall Space Flight Center (MSFC) has designed, fabricated, and hot-fire tested a variety of successful injectors, chambers, and igniters for potential liquid oxygen (LOX) and methane (CH4) systems since 2005. The most recent efforts have focused on components with additive manufacturing (AM) to include unique design features, minimize joints, and reduce final machining efforts. Inconel and copper alloys have been used with AM processes to produce a swirl coaxial injector and multiple methane cooled thrust chambers. The initial chambers included unique thermocouple ports for measuring local coolant channel temperatures along the length of the chamber. Results from hot-fire testing were used to anchor thermal models and generate a regeneratively cooled thruster for a 4,000 lbf LOX/CH4 engine. The completed thruster will be hot-fire tested in the summer of 2016 at MSFC. The thruster design can also be easily scaled and used on a 25,000 lbf engine. To further support the larger engine design, an AM gas generator injector has been designed. Hot-fire testing on this injector is planned for the summer of 2016 at MSFC.

Major design issues of molten carbonate fuel cell power generation unit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, T.P.

1996-04-01

In addition to the stack, a fuel cell power generation unit requires fuel desulfurization and reforming, fuel and oxidant preheating, process heat removal, waste heat recovery, steam generation, oxidant supply, power conditioning, water supply and treatment, purge gas supply, instrument air supply, and system control. These support facilities add considerable cost and system complexity. Bechtel, as a system integrator of M-C Power`s molten carbonate fuel cell development team, has spent substantial effort to simplify and minimize these supporting facilities to meet cost and reliability goals for commercialization. Similiar to other fuels cells, MCFC faces design challenge of how to complymore » with codes and standards, achieve high efficiency and part load performance, and meanwhile minimize utility requirements, weight, plot area, and cost. However, MCFC has several unique design issues due to its high operating temperature, use of molten electrolyte, and the requirement of CO2 recycle.« less

Active Combustion Control for Aircraft Gas Turbine Engines

NASA Technical Reports Server (NTRS)

DeLaat, John C.; Breisacher, Kevin J.; Saus, Joseph R.; Paxson, Daniel E.

2000-01-01

Lean-burning combustors are susceptible to combustion instabilities. Additionally, due to non-uniformities in the fuel-air mixing and in the combustion process, there typically exist hot areas in the combustor exit plane. These hot areas limit the operating temperature at the turbine inlet and thus constrain performance and efficiency. Finally, it is necessary to optimize the fuel-air ratio and flame temperature throughout the combustor to minimize the production of pollutants. In recent years, there has been considerable activity addressing Active Combustion Control. NASA Glenn Research Center's Active Combustion Control Technology effort aims to demonstrate active control in a realistic environment relevant to aircraft engines. Analysis and experiments are tied to aircraft gas turbine combustors. Considerable progress has been shown in demonstrating technologies for Combustion Instability Control, Pattern Factor Control, and Emissions Minimizing Control. Future plans are to advance the maturity of active combustion control technology to eventual demonstration in an engine environment.

Investigation of Desiccants and CO2 Sorbents for Exploration Systems 2016-2017

NASA Technical Reports Server (NTRS)

Knox, James C.; Watson, David W.; Giesy, Timothy J.; Cmarik, Gregory E.; Miller, Lee A.

2017-01-01

NASA has embarked on the mission to enable humans to explore deep space, including the goal of sending humans to Mars. This journey will require significant developments in a wide range of technical areas as resupply and early return are not possible. Additionally, mass, power, and volume must be minimized for all phases to maximize propulsion availability. Among the critical areas identified for development are life support systems, which will require increases in reliability as well as reduce resource usage. Two primary points for reliability are the mechanical stability of sorbent pellets and recovery of CO2 sorbent productivity after off-nominal events. In this paper, we discuss the present efforts towards screening and characterizing commercially-available sorbents for extended operation in desiccant and CO2 removal beds. With minimized dusting as the primary criteria, a commercial 13X zeolite was selected and tested for performance and risk.

DEGAS: sharing and tracking target compound ideas with external collaborators.

PubMed

Lee, Man-Ling; Aliagas, Ignacio; Dotson, Jennafer; Feng, Jianwen A; Gobbi, Alberto; Heffron, Timothy

2012-02-27

To minimize the risk of failure in clinical trials, drug discovery teams must propose active and selective clinical candidates with good physicochemical properties. An additional challenge is that today drug discovery is often conducted by teams at different geographical locations. To improve the collaborative decision making on which compounds to synthesize, we have implemented DEGAS, an application which enables scientists from Genentech and from collaborating external partners to instantly access the same data. DEGAS was implemented to ensure that only the best target compounds are made and that they are made without duplicate effort. Physicochemical properties and DMPK model predictions are computed for each compound to allow the team to make informed decisions when prioritizing. The synthesis progress can be easily tracked. While developing DEGAS, ease of use was a particular goal in order to minimize the difficulty of training and supporting remote users.

Effort, success, and nonuse determine arm choice

PubMed Central

Xiao, Yupeng; Kim, Sujin; Yoshioka, Toshinori; Gordon, James; Osu, Rieko

2015-01-01

How do humans choose one arm or the other to reach single targets in front of the body? Current theories of reward-driven decisionmaking predict that choice results from a comparison of “action values,” which are the expected rewards for possible actions in a given state. In addition, current theories of motor control predict that in planning arm movements, humans minimize an expected motor cost that balances motor effort and endpoint accuracy. Here, we test the hypotheses that arm choice is determined by comparison of action values comprising expected effort and expected task success for each arm, as well as a handedness bias. Right-handed subjects, in either a large or small target condition, were first instructed to use each hand in turn to shoot through an array of targets and then to choose either hand to shoot through the same targets. Effort was estimated via inverse kinematics and dynamics. A mixed-effects logistic-regression analysis showed that, as predicted, both expected effort and expected success predicted choice, as did arm use in the preceding trial. Finally, individual parameter estimation showed that the handedness bias correlated with mean difference between right- and left-arm success, leading to overall lower use of the left arm. We discuss our results in light of arm nonuse in individuals' poststroke. PMID:25948869

Is forced oscillation technique the next respiratory function test of choice in childhood asthma.

PubMed

Alblooshi, Afaf; Alkalbani, Alia; Albadi, Ghaya; Narchi, Hassib; Hall, Graham

2017-12-26

Respiratory diseases, especially asthma, are common in children. While spirometry contributes to asthma diagnosis and management in older children, it has a limited role in younger children whom are often unable to perform forced expiratory manoeuvre. The development of novel diagnostic methods which require minimal effort, such as forced oscillation technique (FOT) is, therefore, a welcome and promising addition. FOT involves applying external, small amplitude oscillations to the respiratory system during tidal breathing. Therefore, it requires minimal effort and cooperation. The FOT has the potential to facilitate asthma diagnosis and management in pre-school children by faciliting the objective measurement of baseline lung function and airway reactivity in children unable to successfully perform spirometry. Traditionally the use of FOT was limited to specialised centres. However, the availability of commercial equipment resulted in its use both in research and in clinical practice. In this article, we review the available literature on the use of FOT in childhood asthma. The technical aspects of FOT are described followed by a discussion of its practical aspects in the clinical field including the measurement of baseline lung function and associated reference ranges, bronchodilator responsiveness and bronchial hyper-responsiveness. We also highlight the difficulties and limitations that might be encountered and future research directions.

Thiadiazolidinones: A New Class of Alanine Racemase Inhibitors with Antimicrobial Activity against Methicillin- Resistant S. aureus

PubMed Central

Ciustea, Mihai; Mootien, Sara; Rosato, Adriana E.; Perez, Oriana; Cirillo, Pier; Yeung, Kacheong R.; Ledizet, Michel; Cynamon, Michael H.; Aristoff, Paul A.; Koski, Raymond A.; Kaplan, Paul A.; Anthony, Karen G.

2012-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) is a human pathogen and a major cause of hospital-acquired infections. New antibacterial agents that have not been compromised by bacterial resistance are needed to treat MRSA-related infections. We chose the S. aureus cell wall synthesis enzyme, alanine racemase (Alr) as the target for a high-throughput screening effort to obtain novel enzyme inhibitors, which inhibit bacterial growth. Among the ‘hits’ identified was a thiadiazolidinone with chemical properties attractive for lead development. This study evaluated the mode of action, antimicrobial activities, and mammalian cell cytotoxicity of the thiadiazolidinone family in order to assess its potential for development as a therapeutic agent against MRSA. The thiadiazolidones inhibited Alr activity with 50% inhibitory concentrations (IC50) ranging from 0. 36 – 6. 4 μM, and they appear to inhibit the enzyme irreversibly. The series inhibited the growth of S. aureus, including MRSA strains, with minimal inhibitory concentrations (MICs) ranging from 6. 25–100 μg/mL. The antimicrobial activity showed selectivity against Gram-positive bacteria and fungi, but not Gram-negative bacteria. The series inhibited human HeLa cell proliferation. Lead development centering on the thiadiazolidinone series would require additional medicinal chemistry efforts to enhance the antibacterial activity and minimize mammalian cell toxicity. PMID:22146584

Additional Developments in Atmosphere Revitalization Modeling and Simulation

NASA Technical Reports Server (NTRS)

Coker, Robert F.; Knox, James C.; Cummings, Ramona; Brooks, Thomas; Schunk, Richard G.; Gomez, Carlos

2013-01-01

NASA's Advanced Exploration Systems (AES) program is developing prototype systems, demonstrating key capabilities, and validating operational concepts for future human missions beyond Earth orbit. These forays beyond the confines of earth's gravity will place unprecedented demands on launch systems. They must launch the supplies needed to sustain a crew over longer periods for exploration missions beyond earth's moon. Thus all spacecraft systems, including those for the separation of metabolic carbon dioxide and water from a crewed vehicle, must be minimized with respect to mass, power, and volume. Emphasis is also placed on system robustness both to minimize replacement parts and ensure crew safety when a quick return to earth is not possible. Current efforts are focused on improving the current state-of-the-art systems utilizing fixed beds of sorbent pellets by evaluating structured sorbents, seeking more robust pelletized sorbents, and examining alternate bed configurations to improve system efficiency and reliability. These development efforts combine testing of sub-scale systems and multi-physics computer simulations to evaluate candidate approaches, select the best performing options, and optimize the configuration of the selected approach. This paper describes the continuing development of atmosphere revitalization models and simulations in support of the Atmosphere Revitalization Recovery and Environmental Monitoring (ARREM) project within the AES program.

Design-for-Six-Sigma To Develop a Bioprocess Knowledge Management Framework.

PubMed

Junker, Beth; Maheshwari, Gargi; Ranheim, Todd; Altaras, Nedim; Stankevicz, Michael; Harmon, Lori; Rios, Sandra; D'anjou, Marc

2011-01-01

Owing to the high costs associated with biopharmaceutical development, considerable pressure has developed for the biopharmaceutical industry to increase productivity by becoming more lean and flexible. The ability to reuse knowledge was identified as one key advantage to streamline productivity, efficiently use resources, and ultimately perform better than the competition. A knowledge management (KM) strategy was assembled for bioprocess-related information using the technique of Design-for-Six-Sigma (DFSS). This strategy supported quality-by-design and process validation efforts for pipeline as well as licensed products. The DFSS technique was selected because it was both streamlined and efficient. These characteristics permitted development of a KM strategy with minimized team leader and team member resources. DFSS also placed a high emphasis on the voice of the customer, information considered crucial to the selection of solutions most appropriate for the current knowledge-based challenges of the organization. The KM strategy developed was comprised of nine workstreams, constructed from related solution buckets which in turn were assembled from the individual solution tasks that were identified. Each workstream's detailed design was evaluated against published and established best practices, as well as the KM strategy project charter and design inputs. Gaps and risks were identified and mitigated as necessary to improve the robustness of the proposed strategy. Aggregated resources (specifically expense/capital funds and staff) and timing were estimated to obtain vital management sponsorship for implementation. Where possible, existing governance and divisional/corporate information technology efforts were leveraged to minimize the additional bioprocess resources required for implementation. Finally, leading and lagging indicator metrics were selected to track the success of pilots and eventual implementation. A knowledge management framework was assembled for bioprocess-related information using a streamlined and efficient technique that minimized team leader and member resources. The technique also highly emphasized input from the staff, who generated and used the knowledge, information considered crucial to selection of solutions most appropriate for the current knowledge-based challenges in the organization. The framework developed was comprised of nine workstreams, constructed from related solution buckets which were assembled from individual solution tasks that were identified. Each workstream's detailed design was evaluated against published and established best practices, as well as the project charter and design inputs. Gaps and risks were identified and mitigated to improve robustness of the proposed framework. Aggregated resources (specifically expense/capital funds and staff) and timing were estimated to obtain vital management sponsorship for implementation. Where possible, existing governance and information technology efforts were leveraged to minimize additional bioprocess resources required for implementation. Finally, metrics were selected to track the success of pilots and eventual implementation.

On the design of script languages for neural simulation.

PubMed

Brette, Romain

2012-01-01

In neural network simulators, models are specified according to a language, either specific or based on a general programming language (e.g. Python). There are also ongoing efforts to develop standardized languages, for example NeuroML. When designing these languages, efforts are often focused on expressivity, that is, on maximizing the number of model types than can be described and simulated. I argue that a complementary goal should be to minimize the cognitive effort required on the part of the user to use the language. I try to formalize this notion with the concept of "language entropy", and I propose a few practical guidelines to minimize the entropy of languages for neural simulation.

Minimization of reflection cracks in flexible pavements.

DOT National Transportation Integrated Search

1977-01-01

This report describes the performance of fabrics used under overlays in an effort to minimize longitudinal and alligator cracking in flexible pavements. It is concluded, although the sample size is small, that the treatments will extend the pavement ...

EPA WASTE MINIMIZATION RESEARCH PROGRAM: AN OVERVIEW

EPA Science Inventory

The US Environmental Protection Agency (EPA) has established a waste minimization research program within the Office of Research and Development's Risk Reduction Engineering Laboratory which is the primary contact for pollution prevention research efforts concentrating on source ...

Preliminary engineering cost trends for highway projects.

DOT National Transportation Integrated Search

2011-10-21

Preliminary engineering (PE) for a highway project encompasses two efforts: planning to minimize the physical, social, and human environmental impacts of projects and engineering design to deliver the best alternative. PE efforts begin years in advan...

Phragmites australis management in the United States: 40 years of methods and outcomes

PubMed Central

Hazelton, Eric L. G.; Mozdzer, Thomas J.; Burdick, David M.; Kettenring, Karin M.; Whigham, Dennis F.

2014-01-01

Studies on invasive plant management are often short in duration and limited in the methods tested, and lack an adequate description of plant communities that replace the invader following removal. Here we present a comprehensive review of management studies on a single species, in an effort to elucidate future directions for research in invasive plant management. We reviewed the literature on Phragmites management in North America in an effort to synthesize our understanding of management efforts, identify gaps in knowledge and improve the efficacy of management. Additionally, we assessed recent ecological findings concerning Phragmites mechanisms of invasion and integrated these findings into our recommendations for more effective management. Our overall goal is to examine whether or not current management approaches can be improved and whether they promote reestablishment of native plant communities. We found: (i) little information on community-level recovery of vegetation following removal of Phragmites; and (ii) most management approaches focus on the removal of Phragmites from individual stands or groups of stands over a relatively small area. With a few exceptions, recovery studies did not monitor vegetation for substantial durations, thus limiting adequate evaluation of the recovery trajectory. We also found that none of the recovery studies were conducted in a landscape context, even though it is now well documented that land-use patterns on adjacent habitats influence the structure and function of wetlands, including the expansion of Phragmites. We suggest that Phragmites management needs to shift to watershed-scale efforts in coastal regions, or larger management units inland. In addition, management efforts should focus on restoring native plant communities, rather than simply eradicating Phragmites stands. Wetlands and watersheds should be prioritized to identify ecosystems that would benefit most from Phragmites management and those where the negative impact of management would be minimal. PMID:24790122

U.S. effort in the development of new crops (Lesquerella, Pennycress and Cuphea)

USDA-ARS?s Scientific Manuscript database

The U.S. effort for the development of New Crops is directed toward the development of crops that can be grown in rotation with traditional commodity crops, off-season production and utilization of acreage not currently under cultivation. This effort is intended to have no or minimal impact on crop...

Ethical Dilemmas in Disaster Medicine

PubMed Central

Ozge Karadag, C; Kerim Hakan, A

2012-01-01

Background Disasters may lead to ethical challenges that are different from usual medical practices. In addition, disaster situations are related with public health ethics more than medical ethics, and accordingly may require stronger effort to achieve a balance between individual and collective rights. This paper aims to review some ethical dilemmas that arise in disasters and mainly focuses on health services. Disasters vary considerably with respect to their time, place and extent; therefore, ethical questions may not always have `one-size-fits-all` answers. On the other hand, embedding ethical values and principles in every aspect of health-care is of vital importance. Reviewing legal and organizational regulations, developing health-care related guidelines, and disaster recovery plans, establishing on-call ethics committees as well as adequate in-service training of health-care workers for ethical competence are among the most critical steps. It is only by making efforts before disasters, that ethical challenges can be minimized in disaster responses. PMID:23285411

Translating the simulation of procedural drilling techniques for interactive neurosurgical training.

PubMed

Stredney, Don; Rezai, Ali R; Prevedello, Daniel M; Elder, J Bradley; Kerwin, Thomas; Hittle, Bradley; Wiet, Gregory J

2013-10-01

Through previous efforts we have developed a fully virtual environment to provide procedural training of otologic surgical technique. The virtual environment is based on high-resolution volumetric data of the regional anatomy. These volumetric data help drive an interactive multisensory, ie, visual (stereo), aural (stereo), and tactile, simulation environment. Subsequently, we have extended our efforts to support the training of neurosurgical procedural technique as part of the Congress of Neurological Surgeons simulation initiative. To deliberately study the integration of simulation technologies into the neurosurgical curriculum and to determine their efficacy in teaching minimally invasive cranial and skull base approaches. We discuss issues of biofidelity and our methods to provide objective, quantitative and automated assessment for the residents. We conclude with a discussion of our experiences by reporting preliminary formative pilot studies and proposed approaches to take the simulation to the next level through additional validation studies. We have presented our efforts to translate an otologic simulation environment for use in the neurosurgical curriculum. We have demonstrated the initial proof of principles and define the steps to integrate and validate the system as an adjuvant to the neurosurgical curriculum.

Minimizing student’s faults in determining the design of experiment through inquiry-based learning

NASA Astrophysics Data System (ADS)

Nilakusmawati, D. P. E.; Susilawati, M.

2017-10-01

The purpose of this study were to describe the used of inquiry method in an effort to minimize student’s fault in designing an experiment and to determine the effectiveness of the implementation of the inquiry method in minimizing student’s faults in designing experiments on subjects experimental design. This type of research is action research participants, with a model of action research design. The data source were students of the fifth semester who took a subject of experimental design at Mathematics Department, Faculty of Mathematics and Natural Sciences, Udayana University. Data was collected through tests, interviews, and observations. The hypothesis was tested by t-test. The result showed that the implementation of inquiry methods to minimize of students fault in designing experiments, analyzing experimental data, and interpret them in cycle 1 students can reduce fault by an average of 10.5%. While implementation in Cycle 2, students managed to reduce fault by an average of 8.78%. Based on t-test results can be concluded that the inquiry method effectively used to minimize of student’s fault in designing experiments, analyzing experimental data, and interpreting them. The nature of the teaching materials on subject of Experimental Design that demand the ability of students to think in a systematic, logical, and critical in analyzing the data and interpret the test cases makes the implementation of this inquiry become the proper method. In addition, utilization learning tool, in this case the teaching materials and the students worksheet is one of the factors that makes this inquiry method effectively minimizes of student’s fault when designing experiments.

U.S. Effort in the Development of New Crops (Lesquerella, Pennycress, Coriander, and Cuphea)

USDA-ARS?s Scientific Manuscript database

The U.S. effort for the development of New Crops is directed toward the advancement of crops that can be grown in rotation with traditional commodity crops, off-season production and utilization of acreage not currently under cultivation. This effort is intended to have no or minimal impact on crop...

Explosive Fracturing of an F-16 Canopy for Through-Canopy Crew Egress

NASA Technical Reports Server (NTRS)

Bement, Laurence J.

2000-01-01

Through-canopy crew egress, such as in the Harrier (AV-8B) aircraft, expands escape envelopes by reducing seat ejection delays in waiting for canopy jettison. Adverse aircraft attitude and reduced forward flight speed can further increase the times for canopy jettison. However, the advent of heavy, high-strength polycarbonate canopies for bird-strike resistance has not only increased jettison times, but has made seat penetration impossible. The goal of the effort described in this paper was to demonstrate a method of explosively fracturing the F-16 polycarbonate canopy to allow through-canopy crew ejection. The objectives of this effort were to: 1. Mount the explosive materials on the exterior of the canopy within the mold line, 2. Minimize visual obstructions, 3. Minimize internal debris on explosive activation, 4. Operate within less than 10 ms, 5. Maintain the shape of the canopy after functioning to prevent major pieces from entering the cockpit, and 6. Minimize the resistance of the canopy to seat penetration. All goals and objectives were met in a full-scale test demonstration. In addition to expanding crew escape envelopes, this canopy fracture approach offers the potential for reducing system complexity, weight and cost, while increasing overall reliability, compared to current canopy jettison approaches. To comply with International Traffic in Arms Regulations (ITAR) and permit public disclosure, this document addresses only the principles of explosive fracturing of the F-16 canopy materials and the end result. ITAR regulations restrict information on improving the performance of weapon systems. Therefore, details on the explosive loads and final assembly of this canopy fracture approach, necessary to assure functional performance, are not included.

Overdrinking, swallowing inhibition, and regional brain responses prior to swallowing

PubMed Central

Saker, Pascal; Egan, Gary F.; McKinley, Michael J.; Denton, Derek A.

2016-01-01

In humans, drinking replenishes fluid loss and satiates the sensation of thirst that accompanies dehydration. Typically, the volume of water drunk in response to thirst matches the deficit. Exactly how this accurate metering is achieved is unknown; recent evidence implicates swallowing inhibition as a potential factor. Using fMRI, this study investigated whether swallowing inhibition is present after more water has been drunk than is necessary to restore fluid balance within the body. This proposal was tested using ratings of swallowing effort and measuring regional brain responses as participants prepared to swallow small volumes of liquid while they were thirsty and after they had overdrunk. Effort ratings provided unequivocal support for swallowing inhibition, with a threefold increase in effort after overdrinking, whereas addition of 8% (wt/vol) sucrose to water had minimal effect on effort before or after overdrinking. Regional brain responses when participants prepared to swallow showed increases in the motor cortex, prefrontal cortices, posterior parietal cortex, striatum, and thalamus after overdrinking, relative to thirst. Ratings of swallowing effort were correlated with activity in the right prefrontal cortex and pontine regions in the brainstem; no brain regions showed correlated activity with pleasantness ratings. These findings are all consistent with the presence of swallowing inhibition after excess water has been drunk. We conclude that swallowing inhibition is an important mechanism in the overall regulation of fluid intake in humans. PMID:27791015

Critical research and advanced technology (CRT) support project

NASA Technical Reports Server (NTRS)

Furman, E. R.; Anderson, D. N.; Hodge, P. E.; Lowell, C. E.; Nainiger, J. J.; Schultz, D. F.

1983-01-01

A critical technology base for utility and industrial gas turbines by planning the use of coal-derived fuels was studied. Development tasks were included in the following areas: (1) Combustion - investigate the combustion of coal-derived fuels and methods to minimize the conversion of fuel-bound nitrogen to NOx; (2) materials - understand and minimize hot corrosion; (3) system studies - integrate and focus the technological efforts. A literature survey of coal-derived fuels was completed and a NOx emissions model was developed. Flametube tests of a two-stage (rich-lean) combustor defined optimum equivalence ratios for minimizing NOx emissions. Sector combustor tests demonstrated variable air control to optimize equivalence ratios over a wide load range and steam cooling of the primary zone liner. The catalytic combustion of coal-derived fuels was demonstrated. The combustion of coal-derived gases is very promising. A hot-corrosion life prediction model was formulated and verified with laboratory testing of doped fuels. Fuel additives to control sulfur corrosion were studied. The intermittent application of barium proved effective. Advanced thermal barrier coatings were developed and tested. Coating failure modes were identified and new material formulations and fabrication parameters were specified. System studies in support of the thermal barrier coating development were accomplished.

Waste management/waste certification plan for the Oak Ridge National Laboratory Environmental Restoration Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, C. Jr.; Hunt-Davenport, L.D.; Cofer, G.H.

1995-03-01

This Waste Management/Waste Certification (C) Plan, written for the Environmental Restoration (ER) Program at Oak Ridge National Laboratory (ORNL), outlines the criteria and methodologies to be used in the management of waste generated during ORNL ER field activities. Other agreed upon methods may be used in the management of waste with consultation with ER and Waste Management Organization. The intent of this plan is to provide information for the minimization, handling, and disposal of waste generated by ER activities. This plan contains provisions for the safe and effective management of waste consistent with the U.S. Environmental Protection Agency`s (EPA`s) guidance.more » Components of this plan have been designed to protect the environment and the health and safety of workers and the public. It, therefore, stresses that investigation derived waste (IDW) and other waste be managed to ensure that (1) all efforts be made to minimize the amount of waste generated; (2) costs associated with sampling storage, analysis, transportation, and disposal are minimized; (3) the potential for public and worker exposure is not increased; and (4) additional contaminated areas are not created.« less

Graphical user interface for a robotic workstation in a surgical environment.

PubMed

Bielski, A; Lohmann, C P; Maier, M; Zapp, D; Nasseri, M A

2016-08-01

Surgery using a robotic system has proven to have significant potential but is still a highly challenging task for the surgeon. An eye surgery assistant has been developed to eliminate the problem of tremor caused by human motions endangering the outcome of ophthalmic surgery. In order to exploit the full potential of the robot and improve the workflow of the surgeon, providing the ability to change control parameters live in the system as well as the ability to connect additional ancillary systems is necessary. Additionally the surgeon should always be able to get an overview over the status of all systems with a quick glance. Therefore a workstation has been built. The contribution of this paper is the design and the implementation of an intuitive graphical user interface for this workstation. The interface has been designed with feedback from surgeons and technical staff in order to ensure its usability in a surgical environment. Furthermore, the system was designed with the intent of supporting additional systems with minimal additional effort.

Neuroethics and Disorders of Consciousness: Discerning Brain States in Clinical Practice and Research.

PubMed

Fins, Joseph J

2016-12-01

Decisions about end-of-life care and participation in clinical research for patients with disorders of consciousness begin with diagnostic discernment. Accurately distinguishing between brain states clarifies clinicians' ethical obligations and responsibilities. Central to this effort is the obligation to provide neuropalliative care for patients in the minimally conscious state who can perceive pain and to restore functional communication through neuroprosthetics, drugs, and rehabilitation to patients with intact but underactivated neural networks. Efforts to bring scientific advances to patients with disorders of consciousness are reviewed, including the investigational use of deep brain stimulation in patients in the minimally conscious state. These efforts help to affirm the civil rights of a population long on the margins. © 2016 American Medical Association. All Rights Reserved.

Designing a low-cost pollution prevention plan to pay off at the University of Houston.

PubMed

Bialowas, Yurika Diaz; Sullivan, Emmett C; Schneller, Robert D

2006-09-01

The University of Houston is located just south of downtown Houston, TX. Many different chemical substances are used in scientific research and teaching activities throughout the campus. These activities generate a significant amount of waste materials that must be discarded as regulated hazardous waste per U.S. Environmental Protection Agency (EPA) rules. The Texas Commission on Environmental Quality (TCEQ) is the state regulatory agency that has enforcement authority for EPA hazardous waste rules in Texas. Currently, the University is classified as a large quantity generator and generates >1000 kg per month of hazardous waste. In addition, the University has experienced a major surge in research activities during the past several years, and overall the quantity of the hazardous waste generated has increased. The TCEQ requires large quantity generators to prepare a 5-yr Pollution Prevention (P2) Plan, which describes efforts to eliminate or minimize the amount of hazardous waste generated. This paper addresses the design and development of a low-cost P2 plan with minimal implementation obstacles and strong payoff potentials for the University. The projects identified can be implemented with existing University staff resources. This benefits the University by enhancing its environmental compliance efforts, and the disposal cost savings can be used for other purposes. Other educational institutions may benefit by undertaking a similar process.

Helioviewer.org: Browsing Very Large Image Archives Online Using JPEG 2000

NASA Astrophysics Data System (ADS)

Hughitt, V. K.; Ireland, J.; Mueller, D.; Dimitoglou, G.; Garcia Ortiz, J.; Schmidt, L.; Wamsler, B.; Beck, J.; Alexanderian, A.; Fleck, B.

2009-12-01

As the amount of solar data available to scientists continues to increase at faster and faster rates, it is important that there exist simple tools for navigating this data quickly with a minimal amount of effort. By combining heterogeneous solar physics datatypes such as full-disk images and coronagraphs, along with feature and event information, Helioviewer offers a simple and intuitive way to browse multiple datasets simultaneously. Images are stored in a repository using the JPEG 2000 format and tiled dynamically upon a client's request. By tiling images and serving only the portions of the image requested, it is possible for the client to work with very large images without having to fetch all of the data at once. In addition to a focus on intercommunication with other virtual observatories and browsers (VSO, HEK, etc), Helioviewer will offer a number of externally-available application programming interfaces (APIs) to enable easy third party use, adoption and extension. Recent efforts have resulted in increased performance, dynamic movie generation, and improved support for mobile web browsers. Future functionality will include: support for additional data-sources including RHESSI, SDO, STEREO, and TRACE, a navigable timeline of recorded solar events, social annotation, and basic client-side image processing.

IMPROVING THE ENVIRONMENTAL PERFORMANCE OF CHEMICAL PROCESSES THROUGH THE USE OF INFORMATION TECHNOLOGY

EPA Science Inventory

Efforts are currently underway at the USEPA to develop information technology applications to improve the environmental performance of the chemical process industry. These efforts include the use of genetic algorithms to optimize different process options for minimal environmenta...

Utilization of steel in industrialized highway bridge systems.

DOT National Transportation Integrated Search

1974-01-01

The space frame concept presented in this report represents the results of an effort to minimize on-site construction time while utilizing steel to provide a high quality but competitive type of bridge structure. A necessary part of the effort was th...

7 CFR 3430.36 - Procedures to minimize or eliminate duplication of effort.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) COOPERATIVE STATE RESEARCH, EDUCATION, AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE COMPETITIVE AND... may implement appropriate business processes to minimize or eliminate the awarding of CSREES Federal... awards made by other Federal agencies. Business processes may include the review of the Current and...

Payload Instrument Design Rules for Safe and Efficient Flight Operations

NASA Astrophysics Data System (ADS)

Montagnon, E.; Ferri, P.

2004-04-01

Payload operations are often being neglected in favour of optimisation of scientific performance of the instrument design. This has major drawbacks in terms of cost, safety, efficiency of operations and finally science return. By taking operational aspects into account in the early phases of the instrument design, with a minimum more cultural than financial or technological additional effort, many problems can be avoided or minimized, with significant benefits to be gained in the mission execution phases. This paper presents possible improvements based on the use of the telemetry and telecommand packet standard, proper sharing of autonomy functions between instrument and platform, and enhanced interface documents.

Neutral buoyancy is optimal to minimize the cost of transport in horizontally swimming seals

PubMed Central

Sato, Katsufumi; Aoki, Kagari; Watanabe, Yuuki Y.; Miller, Patrick J. O.

2013-01-01

Flying and terrestrial animals should spend energy to move while supporting their weight against gravity. On the other hand, supported by buoyancy, aquatic animals can minimize the energy cost for supporting their body weight and neutral buoyancy has been considered advantageous for aquatic animals. However, some studies suggested that aquatic animals might use non-neutral buoyancy for gliding and thereby save energy cost for locomotion. We manipulated the body density of seals using detachable weights and floats, and compared stroke efforts of horizontally swimming seals under natural conditions using animal-borne recorders. The results indicated that seals had smaller stroke efforts to swim a given speed when they were closer to neutral buoyancy. We conclude that neutral buoyancy is likely the best body density to minimize the cost of transport in horizontal swimming by seals. PMID:23857645

Neutral buoyancy is optimal to minimize the cost of transport in horizontally swimming seals.

PubMed

Sato, Katsufumi; Aoki, Kagari; Watanabe, Yuuki Y; Miller, Patrick J O

2013-01-01

Flying and terrestrial animals should spend energy to move while supporting their weight against gravity. On the other hand, supported by buoyancy, aquatic animals can minimize the energy cost for supporting their body weight and neutral buoyancy has been considered advantageous for aquatic animals. However, some studies suggested that aquatic animals might use non-neutral buoyancy for gliding and thereby save energy cost for locomotion. We manipulated the body density of seals using detachable weights and floats, and compared stroke efforts of horizontally swimming seals under natural conditions using animal-borne recorders. The results indicated that seals had smaller stroke efforts to swim a given speed when they were closer to neutral buoyancy. We conclude that neutral buoyancy is likely the best body density to minimize the cost of transport in horizontal swimming by seals.

IntellEditS: intelligent learning-based editor of segmentations.

PubMed

Harrison, Adam P; Birkbeck, Neil; Sofka, Michal

2013-01-01

Automatic segmentation techniques, despite demonstrating excellent overall accuracy, can often produce inaccuracies in local regions. As a result, correcting segmentations remains an important task that is often laborious, especially when done manually for 3D datasets. This work presents a powerful tool called Intelligent Learning-Based Editor of Segmentations (IntellEditS) that minimizes user effort and further improves segmentation accuracy. The tool partners interactive learning with an energy-minimization approach to editing. Based on interactive user input, a discriminative classifier is trained and applied to the edited 3D region to produce soft voxel labeling. The labels are integrated into a novel energy functional along with the existing segmentation and image data. Unlike the state of the art, IntellEditS is designed to correct segmentation results represented not only as masks but also as meshes. In addition, IntellEditS accepts intuitive boundary-based user interactions. The versatility and performance of IntellEditS are demonstrated on both MRI and CT datasets consisting of varied anatomical structures and resolutions.

Considerations for Architecture Level Trade Studies for Environmental Sensors

NASA Technical Reports Server (NTRS)

Peterson, Craig

2010-01-01

Comparisons of key characteristics of environmental sensors such as technology readiness levels, mass, power, volume, and detection capabilities are essential for initial trade studies to determine likely candidates for further development and evaluation. However, these trade studies only provide part of the information necessary to make selection decisions. Ultimately, the sensors must be judged based on the overall system architectures and operational scenarios for which they are intended. This means that additional characteristics, such as architectural needs for redundancy, operational lifetime, ability to maintain calibration, and repair and replacement strategies, among others, must also be considered. Given that these characteristics can be extremely time-consuming and costly to obtain, careful planning is essential to minimize the effort involved. In this paper, an approach is explored for determining an effective yet comprehensive set of architecture level trades which is minimally impacted by the inevitable changes in operational (mission) scenarios. The approach will also identify and integrate the various facilities and opportunities required to obtain the desired architecture level trade information.

ENVIRONMENTAL RESEARCH BRIEF: POLLUTION PREVENTION ASSESSMENT FOR A MANUFACTURER OF FOOD SERVICE EQUIPMENT

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. n an effort to assist these manufacturers Waste Minimization Assessment Cent...

ENVIRONMENTAL RESEARCH BRIEF: POLLUTION PREVENTION FOR A MANUFACTURER OF METAL FASTENERS

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. n an effort to assist these manufacturers Waste Minimization Assessment Cent...

40 CFR 63.6605 - What are my general requirements for complying with this subpart?

Code of Federal Regulations, 2010 CFR

2010-07-01

... maintain any affected source, including associated air pollution control equipment and monitoring equipment, in a manner consistent with safety and good air pollution control practices for minimizing emissions. The general duty to minimize emissions does not require you to make any further efforts to reduce...

ENVIRONMENTAL RESEARCH BRIEF: POLLUTION PREVENTION ASSESSMENT FOR A MANUFACTURER OF REBUILT INDUSTRIAL CRANKSHAFTS

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. n an effort to assist these manufacturers Waste Minimization Assessment Cent...

Active pneumatic vibration isolation system using negative stiffness structures for a vehicle seat

NASA Astrophysics Data System (ADS)

Danh, Le Thanh; Ahn, Kyoung Kwan

2014-02-01

In this paper, an active pneumatic vibration isolation system using negative stiffness structures (NSS) for a vehicle seat in low excitation frequencies is proposed, which is named as an active system with NSS. Here, the negative stiffness structures (NSS) are used to minimize the vibratory attraction of a vehicle seat. Owing to the time-varying and nonlinear behavior of the proposed system, it is not easy to build an accurate dynamic for model-based controller design. Thus, an adaptive intelligent backstepping controller (AIBC) is designed to manage the system operation for high-isolation effectiveness. In addition, an auxiliary control effort is also introduced to eliminate the effect of the unpredictable perturbations. Moreover, a radial basis function neural network (RBFNN) model is utilized to estimate the optimal gain of the auxiliary control effort. Final control input and the adaptive law for updating coefficients of the approximate series can be obtained step by step using a suitable Lyapunov function. Afterward, the isolation performance of the proposed system is assessed experimentally. In addition, the effectiveness of the designed controller for the proposed system is also compared with that of the traditional backstepping controller (BC). The experimental results show that the isolation effectiveness of the proposed system is better than that of the active system without NSS. Furthermore, the undesirable chattering phenomenon in control effort is quite reduced by the estimation mechanism. Finally, some concluding remarks are given at the end of the paper.

Automated Lumber Processing

Treesearch

Powsiri Klinkhachorn; J. Moody; Philip A. Araman

1995-01-01

For the past few decades, researchers have devoted time and effort to apply automation and modern computer technologies towards improving the productivity of traditional industries. To be competitive, one must streamline operations and minimize production costs, while maintaining an acceptable margin of profit. This paper describes the effort of one such endeavor...

Element Load Data Processor (ELDAP) Users Manual

NASA Technical Reports Server (NTRS)

Ramsey, John K., Jr.; Ramsey, John K., Sr.

2015-01-01

Often, the shear and tensile forces and moments are extracted from finite element analyses to be used in off-line calculations for evaluating the integrity of structural connections involving bolts, rivets, and welds. Usually the maximum forces and moments are desired for use in the calculations. In situations where there are numerous structural connections of interest for numerous load cases, the effort in finding the true maximum force and/or moment combinations among all fasteners and welds and load cases becomes difficult. The Element Load Data Processor (ELDAP) software described herein makes this effort manageable. This software eliminates the possibility of overlooking the worst-case forces and moments that could result in erroneous positive margins of safety and/or selecting inconsistent combinations of forces and moments resulting in false negative margins of safety. In addition to forces and moments, any scalar quantity output in a PATRAN report file may be evaluated with this software. This software was originally written to fill an urgent need during the structural analysis of the Ares I-X Interstage segment. As such, this software was coded in a straightforward manner with no effort made to optimize or minimize code or to develop a graphical user interface.

Enriching rice with Zn and Fe while minimizing Cd risk

PubMed Central

Slamet-Loedin, Inez H.; Johnson-Beebout, Sarah E.; Impa, Somayanda; Tsakirpaloglou, Nikolaos

2015-01-01

Enriching iron (Fe) and zinc (Zn) content in rice grains, while minimizing cadmium (Cd) levels, is important for human health and nutrition. Natural genetic variation in rice grain Zn enables Zn-biofortification through conventional breeding, but limited natural Fe variation has led to a need for genetic modification approaches, including over-expressing genes responsible for Fe storage, chelators, and transporters. Generally, Cd uptake and allocation is associated with divalent metal cations (including Fe and Zn) transporters, but the details of this process are still unknown in rice. In addition to genetic variation, metal uptake is sometimes limited by its bioavailability in the soil. The availability of Fe, Zn, and Cd for plant uptake varies widely depending on soil redox potential. The typical practice of flooding rice increases Fe while decreasing Zn and Cd availability. On the other hand, moderate soil drying improves Zn uptake but also increases Cd and decreases Fe uptake. Use of Zn- or Fe-containing fertilizers complements breeding efforts by providing sufficient metals for plant uptake. In addition, the timing of nitrogen fertilization has also been shown to affect metal accumulation in grains. The purpose of this mini-review is to identify knowledge gaps and prioritize strategies for improving the nutritional value and safety of rice. PMID:25814994

A methodology for improving the spatial framework for secondary education: An example from trinidad and tobago

NASA Astrophysics Data System (ADS)

London, Norrel A.

1992-03-01

Following a period of massive quantitative increases in education provision in the 1970's and 1980's, many Third World nations now find it difficult to provide additional school places to improve their present system of education provision. Strapped by financial constraints on the one hand, and on the other by pressing demands for efficient and effective services, developing nations have been encouraged to adopt judicious and careful spatial planning as a way out of the present dilemma. The paper uses a technical model to demonstrate how Trinidad and Tobago may reduce the problem of a lengthy journey-to-school, currently faced by many secondary school students. Paradoxically, this results from the Government's efforts to expand the system of secondary education during the past two decades. Using an index of distance travelled between home and school, the paper evaluates the geographic location of eight schools that have been proposed for construction by Trinidad and Tobago, and recommends alternative locations that would more effectively and more quickly achieve the Government's objective of minimizing home-to-school distances now travelled by secondary students. The rank order in which the proposed eight schools ought to be built, so as to achieve distance minimization with incremental addition of each new facility is also suggested.

24 CFR 983.254 - Vacancies.

Code of Federal Regulations, 2010 CFR

2010-04-01

... vacancy (and notwithstanding the reasonable good faith efforts of the PHA to fill such vacancies), the PHA... on the PHA waiting list referred by the PHA. (3) The PHA and the owner must make reasonable good faith efforts to minimize the likelihood and length of any vacancy. (b) Reducing number of contract...

From the Floor: Raising Child Care Salaries.

ERIC Educational Resources Information Center

Whitebook, Marcy; And Others

The comprehensive National Child Care Staffing Study confirmed that American children are in jeopardy because their teachers are poorly compensated and minimally trained. An increasing number of local and state efforts have begun to face this crisis head-on. This booklet reviews these efforts, focusing primarily on strategies for raising salaries.…

77 FR 38298 - Agency Information Collection Activities: Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

... of information technology to minimize the information collection burden. 1. Type of Information... issues: (1) supporting CMS' efforts to improve payment accuracy and (2) understanding issues of access.... As a new collection, the information collected is expected to support CMS' efforts to improve the...

Continuous Improvement in State Funded Preschool Programs

ERIC Educational Resources Information Center

Jackson, Sarah L.

2012-01-01

State funded preschool programs were constantly faced with the need to change in order to address internal and external demands. As programs engaged in efforts towards change, minimal research was available on how to support continuous improvement efforts within the context unique to state funded preschool programs. Guidance available had…

Minimizing the influence of unconscious bias in evaluations: a practical guide.

PubMed

Goldyne, Adam J

2007-01-01

The forensic psychiatrist's efforts to strive for objectivity may be impaired by unrecognized unconscious biases. The author presents a framework for understanding such biases. He then offers a practical approach for individual forensic psychiatrists who want to identify and minimize the influence of previously unrecognized biases on their evaluations.

Decision Making and the Avoidance of Cognitive Demand

ERIC Educational Resources Information Center

Kool, Wouter; McGuire, Joseph T.; Rosen, Zev B.; Botvinick, Matthew M.

2010-01-01

Behavioral and economic theories have long maintained that actions are chosen so as to minimize demands for exertion or work, a principle sometimes referred to as the "law of less work". The data supporting this idea pertain almost entirely to demands for physical effort. However, the same minimization principle has often been assumed also to…

ENVIRONMENTAL RESEARCH BRIEF: POLLUTION PREVENTION ASSESSMENT FOR A MANUFACTURER OF GEAR CASES FOR OUTBOARD MOTORS

EPA Science Inventory

The U.S. Environmental Protection Agency (EPA) has funded a pilot project to assist small and medium-size manufacturers who want to minimize their generation of waste but who lack the expertise to do so. n an effort to assist these manufacturers Waste Minimization Assessment Cent...

Progress toward a reduced phage genetic code.

PubMed

Yao, Anzhi; Reed, Sean A; Koh, Minseob; Yu, Chenguang; Luo, Xiaozhou; Mehta, Angad P; Schultz, Peter G

2018-03-26

All known living organisms use at least 20 amino acids as the basic building blocks of life. Efforts to reduce the number of building blocks in a replicating system to below the 20 canonical amino acids have not been successful to date. In this work, we use filamentous phage as a model system to investigate the feasibility of removing methionine (Met) from the proteome. We show that all 24 elongation Met sites in the M13 phage genome can be replaced by other canonical amino acids. Most of these changes involve substitution of methionine by leucine (Leu), but in some cases additional compensatory mutations are required. Combining Met substituted sites in the proteome generally led to lower viability/infectivity of the mutant phages, which remains the major challenge in eliminating all methionines from the phage proteome. To date a total of 15 (out of all 24) elongation Mets have been simultaneously deleted from the M13 proteome, providing a useful foundation for future efforts to minimize the genetic code. Copyright © 2018. Published by Elsevier Ltd.

Exploring the repetition bias in voluntary task switching.

PubMed

Mittelstädt, Victor; Dignath, David; Schmidt-Ott, Magdalena; Kiesel, Andrea

2018-01-01

In the voluntary task-switching paradigm, participants are required to randomly select tasks. We reasoned that the consistent finding of a repetition bias (i.e., participants repeat tasks more often than expected by chance) reflects reasonable adaptive task selection behavior to balance the goal of random task selection with the goals to minimize the time and effort for task performance. We conducted two experiments in which participants were provided with variable amount of preview for the non-chosen task stimuli (i.e., potential switch stimuli). We assumed that switch stimuli would initiate some pre-processing resulting in improved performance in switch trials. Results showed that reduced switch costs due to extra-preview in advance of each trial were accompanied by more task switches. This finding is in line with the characteristics of rational adaptive behavior. However, participants were not biased to switch tasks more often than chance despite large switch benefits. We suggest that participants might avoid effortful additional control processes that modulate the effects of preview on task performance and task choice.

Joint contact forces can be reduced by improving joint moment symmetry in below-knee amputee gait simulations.

PubMed

Koelewijn, Anne D; van den Bogert, Antonie J

2016-09-01

Despite having a fully functional knee and hip in both legs, asymmetries in joint moments of the knee and hip are often seen in gait of persons with a unilateral transtibial amputation (TTA), possibly resulting in excessive joint loading. We hypothesize that persons with a TTA can walk with more symmetric joint moments at the cost of increased effort or abnormal kinematics. The hypothesis was tested using predictive simulations of gait. Open loop controls of one gait cycle were found by solving an optimization problem that minimizes a combination of walking effort and tracking error in joint angles, ground reaction force and gait cycle duration. A second objective was added to penalize joint moment asymmetry, creating a multi-objective optimization problem. A Pareto front was constructed by changing the weights of the objectives and three solutions were analyzed to study the effect of increasing joint moment symmetry. When the optimization placed more weight on moment symmetry, walking effort increased and kinematics became less normal, confirming the hypothesis. TTA gait improved with a moderate increase in joint moment symmetry. At a small cost of effort and abnormal kinematics, the peak hip extension moment in the intact leg was decreased significantly, and so was the joint contact force in the knee and hip. Additional symmetry required a significant increase in walking effort and the joint contact forces in both hips became significantly higher than in able-bodied gait. Copyright © 2016 Elsevier B.V. All rights reserved.

A streamlined failure mode and effects analysis.

PubMed

Ford, Eric C; Smith, Koren; Terezakis, Stephanie; Croog, Victoria; Gollamudi, Smitha; Gage, Irene; Keck, Jordie; DeWeese, Theodore; Sibley, Greg

2014-06-01

Explore the feasibility and impact of a streamlined failure mode and effects analysis (FMEA) using a structured process that is designed to minimize staff effort. FMEA for the external beam process was conducted at an affiliate radiation oncology center that treats approximately 60 patients per day. A structured FMEA process was developed which included clearly defined roles and goals for each phase. A core group of seven people was identified and a facilitator was chosen to lead the effort. Failure modes were identified and scored according to the FMEA formalism. A risk priority number,RPN, was calculated and used to rank failure modes. Failure modes with RPN > 150 received safety improvement interventions. Staff effort was carefully tracked throughout the project. Fifty-two failure modes were identified, 22 collected during meetings, and 30 from take-home worksheets. The four top-ranked failure modes were: delay in film check, missing pacemaker protocol/consent, critical structures not contoured, and pregnant patient simulated without the team's knowledge of the pregnancy. These four failure modes had RPN > 150 and received safety interventions. The FMEA was completed in one month in four 1-h meetings. A total of 55 staff hours were required and, additionally, 20 h by the facilitator. Streamlined FMEA provides a means of accomplishing a relatively large-scale analysis with modest effort. One potential value of FMEA is that it potentially provides a means of measuring the impact of quality improvement efforts through a reduction in risk scores. Future study of this possibility is needed.

High Positive End-Expiratory Pressure Renders Spontaneous Effort Noninjurious.

PubMed

Morais, Caio C A; Koyama, Yukiko; Yoshida, Takeshi; Plens, Glauco M; Gomes, Susimeire; Lima, Cristhiano A S; Ramos, Ozires P S; Pereira, Sérgio M; Kawaguchi, Naomasa; Yamamoto, Hirofumi; Uchiyama, Akinori; Borges, João B; Vidal Melo, Marcos F; Tucci, Mauro R; Amato, Marcelo B P; Kavanagh, Brian P; Costa, Eduardo L V; Fujino, Yuji

2018-05-15

In acute respiratory distress syndrome (ARDS), atelectatic solid-like lung tissue impairs transmission of negative swings in pleural pressure (Ppl) that result from diaphragmatic contraction. The localization of more negative Ppl proportionally increases dependent lung stretch by drawing gas either from other lung regions (e.g., nondependent lung [pendelluft]) or from the ventilator. Lowering the level of spontaneous effort and/or converting solid-like to fluid-like lung might render spontaneous effort noninjurious. To determine whether spontaneous effort increases dependent lung injury, and whether such injury would be reduced by recruiting atelectatic solid-like lung with positive end-expiratory pressure (PEEP). Established models of severe ARDS (rabbit, pig) were used. Regional histology (rabbit), inflammation (positron emission tomography; pig), regional inspiratory Ppl (intrabronchial balloon manometry), and stretch (electrical impedance tomography; pig) were measured. Respiratory drive was evaluated in 11 patients with ARDS. Although injury during muscle paralysis was predominantly in nondependent and middle lung regions at low (vs. high) PEEP, strong inspiratory effort increased injury (indicated by positron emission tomography and histology) in dependent lung. Stronger effort (vs. muscle paralysis) caused local overstretch and greater tidal recruitment in dependent lung, where more negative Ppl was localized and greater stretch was generated. In contrast, high PEEP minimized lung injury by more uniformly distributing negative Ppl, and lowering the magnitude of spontaneous effort (i.e., deflection in esophageal pressure observed in rabbits, pigs, and patients). Strong effort increased dependent lung injury, where higher local lung stress and stretch was generated; effort-dependent lung injury was minimized by high PEEP in severe ARDS, which may offset need for paralysis.

Recent developments in minimal processing: a tool to retain nutritional quality of food.

PubMed

Pasha, Imran; Saeed, Farhan; Sultan, M Tauseef; Khan, Moazzam Rafiq; Rohi, Madiha

2014-01-01

The modernization during the last century resulted in urbanization coupled with modifications in lifestyles and dietary habits. In the same era, industrial developments made it easier to meet the requirements for processed foods. However, consumers are now interested in minimally processed foods owing to increase in their awareness to have fruits and vegetables with superior quality, and natural integrity with fewer additives. The food products deteriorate as a consequence of physiological aging, biochemical changes, high respiration rat,e and high ethylene production. These factors contribute substantially to discoloration, loss of firmness, development of off-flavors, acidification, and microbial spoilage. Simultaneously, food processors are using emerging approaches to process perishable commodities, along with enhanced nutritional and sensorial quality. The present review article is an effort to utilize the modern approaches to minimize the processing and deterioration. The techniques discussed in this paper include chlorination, ozonation, irradiation, photosensitization, edible coating, natural preservative use, high-pressure processing, microwave heating, ohmic heating, and hurdle technology. The consequences of these techniques on shelf-life stability, microbial safety, preservation of organoleptic and nutritional quality, and residue avoidance are the limelight of the paper. Moreover, the discussion has been made on the feasibility and operability of these techniques in modern-day processing.

DUV light source sustainability achievements and next steps

NASA Astrophysics Data System (ADS)

Roman, Yzzer; Cacouris, Ted; Raju, Kumar Raja Guvindan; Kanawade, Dinesh; Gillespie, Walt; Luo, Siqi; Mason, Eric; Manley, David; Das, Saptaparna

2018-03-01

Key sustainability opportunities have been executed in support of corporate initiatives to reduce the environmental footprint and decrease the running cost of DUV light sources. Previously, substantial neon savings were demonstrated over several years through optimized gas management technologies. Beyond this work, Cymer is developing the XLGR 100, a self-contained neon recycling system, to enable minimal gas consumption. The high efficiency results of the XLGR 100 in a production factory are validated in this paper. Cymer has also developed new light source modules with 33% longer life in an effort to reduce raw and associated resource consumption. In addition, a progress report is included regarding the improvements developed to reduce light source energy consumption.

Exercise considerations in coronary artery disease, peripheral vascular disease, and diabetes mellitus.

PubMed

Armen, Joseph; Smith, Bryan W

2003-01-01

Physical inactivity is a risk factor for cardiovascular disease. Regular aerobic and resistance training increases exercise capacity and plays a role both in the primary and secondary prevention of cardiovascular disease. Patients with coronary artery disease, peripheral vascular disease, or diabetes mellitus must be considered individually when prescribing exercise because their clinical status can vary greatly. In addition, a majority of these patients have multiple comorbid disorders such as renal, neurologic, and retinal disease that may affect their ability to exercise safely. Therefore, a preparticipation medical evaluation is required. An exercise prescription should be tailored to each person's unique set of circumstances and reflect an effort to maximize the anticipated benefits while minimizing the risks.

Stochastic optimal control as non-equilibrium statistical mechanics: calculus of variations over density and current

NASA Astrophysics Data System (ADS)

Chernyak, Vladimir Y.; Chertkov, Michael; Bierkens, Joris; Kappen, Hilbert J.

2014-01-01

In stochastic optimal control (SOC) one minimizes the average cost-to-go, that consists of the cost-of-control (amount of efforts), cost-of-space (where one wants the system to be) and the target cost (where one wants the system to arrive), for a system participating in forced and controlled Langevin dynamics. We extend the SOC problem by introducing an additional cost-of-dynamics, characterized by a vector potential. We propose derivation of the generalized gauge-invariant Hamilton-Jacobi-Bellman equation as a variation over density and current, suggest hydrodynamic interpretation and discuss examples, e.g., ergodic control of a particle-within-a-circle, illustrating non-equilibrium space-time complexity.

Analysis and Comparison of Aluminum Alloy Welded Joints Between Metal Inert Gas Welding and Tungsten Inert Gas Welding

NASA Astrophysics Data System (ADS)

Zhao, Lei; Guan, Yingchun; Wang, Qiang; Cong, Baoqiang; Qi, Bojin

2015-09-01

Surface contamination usually occurs during welding processing and it affects the welds quality largely. However, the formation of such contaminants has seldom been studied. Effort was made to study the contaminants caused by metal inert gas (MIG) welding and tungsten inert gas (TIG) welding processes of aluminum alloy, respectively. SEM, FTIR and XPS analysis was carried out to investigate the microstructure as well as surface chemistry. These contaminants were found to be mainly consisting of Al2O3, MgO, carbide and chromium complexes. The difference of contaminants between MIG and TIG welds was further examined. In addition, method to minimize these contaminants was proposed.

Minimally invasive strabismus surgery versus paralimbal approach: A randomized, parallel design study is minimally invasive strabismus surgery worth the effort?

PubMed Central

Sharma, Richa; Amitava, Abadan K; Bani, Sadat AO

2014-01-01

Introduction: Minimal access surgery is common in all fields of medicine. We compared a new minimally invasive strabismus surgery (MISS) approach with a standard paralimbal strabismus surgery (SPSS) approach in terms of post-operative course. Materials and Methods: This parallel design study was done on 28 eyes of 14 patients, in which one eye was randomized to MISS and the other to SPSS. MISS was performed by giving two conjunctival incisions parallel to the horizontal rectus muscles; performing recession or resection below the conjunctival strip so obtained. We compared post-operative redness, congestion, chemosis, foreign body sensation (FBS), and drop intolerance (DI) on a graded scale of 0 to 3 on post-operative day 1, at 2-3 weeks, and 6 weeks. In addition, all scores were added to obtain a total inflammatory score (TIS). Statistical Analysis: Inflammatory scores were analyzed using Wilcoxon's signed rank test. Results: On the first post-operative day, only FBS (P =0.01) and TIS (P =0.04) showed significant difference favoring MISS. At 2-3 weeks, redness (P =0.04), congestion (P =0.04), FBS (P =0.02), and TIS (P =0.04) were significantly less in MISS eye. At 6 weeks, only redness (P =0.04) and TIS (P =0.05) were significantly less. Conclusion: MISS is more comfortable in the immediate post-operative period and provides better cosmesis in the intermediate period. PMID:24088635

Evaluation of outdoor-to-indoor response to minimized sonic booms

NASA Technical Reports Server (NTRS)

Brown, David; Sutherland, Louis C.

1992-01-01

Various studies were conducted by NASA and others on the practical limitations of sonic boom signature shaping/minimization for the High-Speed Civil Transport (HSCT) and on the effects of these shaped boom signatures on perceived loudness. This current effort is a further part of this research with emphasis on examining shaped boom signatures which are representative of the most recent investigations of practical limitations on sonic boom minimization, and on examining and comparing the expected response to these signatures when experienced indoors and outdoors.

Recent Advances for the Detection of Ochratoxin A.

PubMed

Ha, Tai Hwan

2015-12-04

Ochratoxin A (OTA) is one of the mycotoxins secreted by Aspersillus and Penicillium that can easily colonize various grains like coffee, peanut, rice, and maize. Since OTA is a chemically stable compound that can endure the physicochemical conditions of modern food processing, additional research efforts have been devoted to develop sensitive and cost-effective surveillance solutions. Although traditional chromatographic and immunoassays appear to be mature enough to attain sensitivity up to the regulation levels, alternative detection schemes are still being enthusiastically pursued in an attempt to meet the requirements of rapid and cost-effective detections. Herein, this review presents recent progresses in OTA detections with minimal instrumental usage, which have been facilitated by the development of OTA aptamers and by the innovations in functional nanomaterials. In addition to the introduction of aptamer-based OTA detection techniques, OTA-specific detection principles are also presented, which exclusively take advantage of the unique chemical structure and related physicochemical characteristics.

Causal Attribution: A New Scale Developed to Minimize Existing Methodological Problems.

ERIC Educational Resources Information Center

Bull, Kay Sather; Feuquay, Jeffrey P.

In order to facilitate research on the construct of causal attribution, this paper details developmental procedures used to minimize previous deficiencies and proposes a new scale. The first version of the scale was in ipsative form and provided two basic sets of indices: (1) ability, effort, luck, and task difficulty indices in success and…

Early Success Is Vital in Minimal Worksite Wellness Interventions at Small Worksites

ERIC Educational Resources Information Center

Ablah, Elizabeth; Dong, Frank; Konda, Kurt; Konda, Kelly; Armbruster, Sonja; Tuttle, Becky

2015-01-01

Intervention: In an effort to increase physical activity, 15 workplaces participated in a minimal-contact 10,000-steps-a-day program sponsored by the Sedgwick County Health Department in 2007 and 2008. Pedometers were provided to measure participants' weekly steps for the 10-week intervention. Method: Participants were defined as those who…

Nutritional strategies to combat Salmonella in mono-gastric food animal production.

PubMed

Berge, A C; Wierup, M

2012-04-01

Nutritional strategies to minimize Salmonella in food animal production are one of the key components in producing safer food. The current European approach is to use a farm-to-fork strategy, where each sector must implement measures to minimize and reduce Salmonella contamination. In the pre-harvest phase, this means that all available tools need to be used such as implementation of biosecurity measures, control of Salmonella infections in animals at the farm as well as in transport and trade, optimal housing and management including cleaning, disinfection procedures as well as efforts to achieve Salmonella-free feed production. This paper describes some nutritional strategies that could be used in farm control programmes in the major mono-gastric food production animals: poultry and pigs. Initially, it is important to prevent the introduction of Salmonella onto the farm through Salmonella-contaminated feed and this risk is reduced through heat treatment and the use of organic acids and their salts and formaldehyde. Microbiological sampling and monitoring for Salmonella in the feed mills is required to minimize the introduction of Salmonella via feed onto the farm. In addition, feed withdrawal may create a stressful situation in animals, resulting in an increase in Salmonella shedding. Physical feed characteristics such as coarse-ground meal to pigs can delay gastric emptying, thereby increasing the acidity of the gut and thus reducing the possible prevalence of Salmonella. Coarse-ground grains and access to litter have also been shown to decrease Salmonella shedding in poultry. The feed can also modify the gastro-intestinal tract microflora and influence the immune system, which can minimize Salmonella colonization and shedding. Feed additives, such as organic acids, short- and medium-chain fatty acids, probiotics, including competitive exclusion cultures, prebiotics and certain specific carbohydrates, such as mannan-based compounds, egg proteins, essential oils and bacteriophages, have the potential to reduce Salmonella levels when added to the feed. These nutritional strategies could be evaluated and used in farm control programmes.

Funtools: Fits Users Need Tools for Quick, Quantitative Analysis

NASA Technical Reports Server (NTRS)

Mandel, Eric; Brederkamp, Joe (Technical Monitor)

2001-01-01

The Funtools project arose out of conversations with astronomers about the decline in their software development efforts over the past decade. A stated reason for this decline is that it takes too much effort to master one of the existing FITS libraries simply in order to write a few analysis programs. This problem is exacerbated by the fact that astronomers typically develop new programs only occasionally, and the long interval between coding efforts often necessitates re-learning the FITS interfaces. We therefore set ourselves the goal of developing a minimal buy-in FITS library for researchers who are occasional (but serious) coders. In this case, "minimal buy-in" meant "easy to learn, easy to use, and easy to re-learn next month". Based on conversations with astronomers interested in writing code, we concluded that this goal could be achieved by emphasizing two essential capabilities. The first was the ability to write FITS programs without knowing much about FITS, i.e., without having to deal with the arcane rules for generating a properly formatted FITS file. The second was to support the use of already-familiar C/Unix facilities, especially C structs and Unix stdio. Taken together, these two capabilities would allow researchers to leverage their existing programming expertise while minimizing the need to learn new and complex coding rules.

Lyme disease and conservation

USGS Publications Warehouse

Ginsberg, H.

1994-01-01

Lyme disease is a tick-borne illness that is wide-spread in North America, especially in the northeastern and northcentral United States. This disease could negatively influence efforts to conserve natural populations in two ways: (1) the disease could directly affect wild animal health; and (2) tick control efforts could adversely affect natural populations and communities. Lyme disease affects several domestic animals, but symptoms have been reported in only a few wild species. Direct effects of Lyme disease on wild animal populations have not been reported, but the disease should be considered as a possible cause in cases of unexplained population declines in endemic areas. Methods available to manage ticks and Lyme disease include human self-protection techniques, manipulation of habitats and hosts species populations, biological control, and pesticide applications. The diversity of available techniques allows selection of approaches to minimize environmental effects by (1) emphasizing personal protection techniques, (2) carefully targeting management efforts to maximize efficiency, and (3) integrating environmentally benign techniques to improve management while avoiding broad-scale environmentally destructive approaches. The environmental effects of Lyme disease depend, to a large extent, on the methods chosen to minimize human exposure to infected ticks. Conservation biologists can help design tick management programs that effectively lower the incidence of human Lyme disease while simultaneously minimizing negative effects on natural populations.

Minimizing liability during internal investigations.

PubMed

Morris, Cole

2010-01-01

Today's security professional must appreciate the potential landmines in any investigative effort and work collaboratively with others to minimize liability risks, the author points out. In this article he examines six civil torts that commonly arise from unprofessionally planned or poorly executed internal investigations-defamation, false imprisonment. intentional infliction of emotional distress, assault and battery, invasion of privacy, and malicious prosecution and abuse of process.

Risk of bias and confounding of observational studies of Zika virus infection: A scoping review of research protocols.

PubMed

Reveiz, Ludovic; Haby, Michelle M; Martínez-Vega, Ruth; Pinzón-Flores, Carlos E; Elias, Vanessa; Smith, Emma; Pinart, Mariona; Broutet, Nathalie; Becerra-Posada, Francisco; Aldighieri, Sylvain; Van Kerkhove, Maria D

2017-01-01

Given the severity and impact of the current Zika virus (ZIKV) outbreak in the Americas, numerous countries have rushed to develop research studies to assess ZIKV and its potential health consequences. In an effort to ensure that studies are comprehensive, both internally and externally valid, and with reliable results, the World Health Organization, the Pan American Health Organization, Institut Pasteur, the networks of Fiocruz, the Consortia for the Standardization of Influenza Seroepidemiology (CONSISE) and the International Severe Acute Respiratory and Emerging Infection Consortium (ISARIC) have generated six standardized clinical and epidemiological research protocols and questionnaires to address key public health questions on ZIKV. We conducted a systematic search of ongoing study protocols related to ZIKV research. We analyzed the content of protocols of 32 cohort studies and 13 case control studies for systematic bias that could produce erroneous results. Additionally we aimed to characterize the risks of bias and confounding in observational studies related to ZIKV and to propose ways to minimize them, including the use of six newly standardized research protocols. Observational studies of ZIKV face an array of challenges, including measurement of exposure and outcomes (microcephaly and Guillain-Barré Syndrome). Potential confounders need to be measured where known and controlled for in the analysis. Selection bias due to non-random selection is a significant issue, particularly in the case-control design, and losses to follow-up is equally important for the cohort design. Observational research seeking to answer key questions on the ZIKV should consider these restrictions and take precautions to minimize bias in an effort to provide reliable and valid results. Utilization of the standardized research protocols developed by the WHO, PAHO, Institut Pasteur, and CONSISE will harmonize the key methodological aspects of each study design to minimize bias at different stages of the study. Biases need to be considered by researchers implementing the standardized protocols as well as by users of observational epidemiological studies of ZIKV.

An optimal control strategies using vaccination and fogging in dengue fever transmission model

NASA Astrophysics Data System (ADS)

Fitria, Irma; Winarni, Pancahayani, Sigit; Subchan

2017-08-01

This paper discussed regarding a model and an optimal control problem of dengue fever transmission. We classified the model as human and vector (mosquito) population classes. For the human population, there are three subclasses, such as susceptible, infected, and resistant classes. Then, for the vector population, we divided it into wiggler, susceptible, and infected vector classes. Thus, the model consists of six dynamic equations. To minimize the number of dengue fever cases, we designed two optimal control variables in the model, the giving of fogging and vaccination. The objective function of this optimal control problem is to minimize the number of infected human population, the number of vector, and the cost of the controlling efforts. By giving the fogging optimally, the number of vector can be minimized. In this case, we considered the giving of vaccination as a control variable because it is one of the efforts that are being developed to reduce the spreading of dengue fever. We used Pontryagin Minimum Principle to solve the optimal control problem. Furthermore, the numerical simulation results are given to show the effect of the optimal control strategies in order to minimize the epidemic of dengue fever.

Use of minimal invasive extracorporeal circulation in cardiac surgery: principles, definitions and potential benefits. A position paper from the Minimal invasive Extra-Corporeal Technologies international Society (MiECTiS)

PubMed Central

Anastasiadis, Kyriakos; Murkin, John; Antonitsis, Polychronis; Bauer, Adrian; Ranucci, Marco; Gygax, Erich; Schaarschmidt, Jan; Fromes, Yves; Philipp, Alois; Eberle, Balthasar; Punjabi, Prakash; Argiriadou, Helena; Kadner, Alexander; Jenni, Hansjoerg; Albrecht, Guenter; van Boven, Wim; Liebold, Andreas; de Somer, Fillip; Hausmann, Harald; Deliopoulos, Apostolos; El-Essawi, Aschraf; Mazzei, Valerio; Biancari, Fausto; Fernandez, Adam; Weerwind, Patrick; Puehler, Thomas; Serrick, Cyril; Waanders, Frans; Gunaydin, Serdar; Ohri, Sunil; Gummert, Jan; Angelini, Gianni; Falk, Volkmar; Carrel, Thierry

2016-01-01

Minimal invasive extracorporeal circulation (MiECC) systems have initiated important efforts within science and technology to further improve the biocompatibility of cardiopulmonary bypass components to minimize the adverse effects and improve end-organ protection. The Minimal invasive Extra-Corporeal Technologies international Society was founded to create an international forum for the exchange of ideas on clinical application and research of minimal invasive extracorporeal circulation technology. The present work is a consensus document developed to standardize the terminology and the definition of minimal invasive extracorporeal circulation technology as well as to provide recommendations for the clinical practice. The goal of this manuscript is to promote the use of MiECC systems into clinical practice as a multidisciplinary strategy involving cardiac surgeons, anaesthesiologists and perfusionists. PMID:26819269

Variation in body condition during the post-moult foraging trip of southern elephant seals and its consequences on diving behaviour.

PubMed

Richard, Gaëtan; Vacquié-Garcia, Jade; Jouma'a, Joffrey; Picard, Baptiste; Génin, Alexandre; Arnould, John P Y; Bailleul, Frédéric; Guinet, Christophe

2014-07-15

Mature female southern elephant seals (Mirounga leonina) come ashore only in October to breed and in January to moult, spending the rest of the year foraging at sea. Mature females may lose as much as 50% of their body mass, mostly in lipid stores, during the breeding season due to fasting and lactation. When departing to sea, post-breeding females are negatively buoyant, and the relative change in body condition (i.e. density) during the foraging trip has previously been assessed by monitoring the descent rate during drift dives. However, relatively few drift dives are performed, resulting in low resolution of the temporal reconstruction of body condition change. In this study, six post-breeding females were equipped with time-depth recorders and accelerometers to investigate whether changes in active swimming effort and speed could be used as an alternative method of monitoring density variations throughout the foraging trip. In addition, we assessed the consequences of density change on the swimming efforts of individuals while diving and investigated the effects on dive duration. Both descent swimming speed and ascent swimming effort were found to be strongly correlated to descent rate during drift dives, enabling the fine-scale monitoring of seal density change over the whole trip. Negatively buoyant seals minimized swimming effort during descents, gliding down at slower speeds, and reduced their ascent swimming effort to maintain a nearly constant swimming speed as their buoyancy increased. One per cent of seal density variation over time was found to induce a 20% variation in swimming effort during dives with direct consequences on dive duration. © 2014. Published by The Company of Biologists Ltd.

Special role of corn flour as an ideal carbon source for aerobic denitrification with minimized nitrous oxide emission.

PubMed

Zhu, Shuangyue; Zheng, Maosheng; Li, Can; Gui, Mengyao; Chen, Qian; Ni, Jinren

2015-06-01

Much effort has been made for reducing nitrous oxide (N2O) emission in wastewater treatment processes. This paper presents an interesting way to minimize N2O in aerobic denitrification by strain Pseudomonas stutzeri PCN-1 with help of corn flour as cheaper additional carbon source. Experimental results showed that maximal N2O accumulation by strain PCN-1 was only 0.02% of removed nitrogen if corn flour was used as sole carbon source, which was significantly reduced by 52.07-99.81% comparing with others such as succinate, glucose, acetate and citrate. Sustained release of reducing sugar from starch and continuous expression of nosZ coding for N2O reductase contributed to the special role of corn flour as the ideal carbon source for strain PCN-1. Further experiments in sequencing batch reactors (SBRs) demonstrated similarly efficient nitrogen removal with much less N2O emission due to synergy of the novel strain and activated sludge, which was then confirmed by quantitative PCR analysis. Copyright © 2015 Elsevier Ltd. All rights reserved.

National Training and Education Standards for Health and Wellness Coaching: The Path to National Certification

PubMed Central

Wolever, Ruth Q.; Lawson, Karen; Moore, Margaret

2015-01-01

The purpose of this article is twofold: (1) to announce the findings of the job task analysis as well as national training and education standards for health and wellness coaching (HWC) that have been developed by the large-scale, collaborative efforts of the National Consortium for Credentialing Health and Wellness Coaches (NCCHWC) and (2) to invite commentary from the public. The rapid proliferation of individuals and organizations using the terms of health and/or wellness coaches and the propagation of private industry and academic coach training and education programs endeavoring to prepare these coaches has created an urgent and pressing need for national standards for use of the term health and wellness coach, as well as minimal requirements for training, education, and certification. Professionalizing the field with national standards brings a clear and consistent definition of health and wellness coaching and accepted practice standards that are uniform across the field. In addition, clear standards allow for uniform curricular criteria to ensure a minimal benchmark for education, training, and skills and knowledge evaluation of professional health and wellness coaches. PMID:25984418

Long-term seafloor monitoring at an open ocean aquaculture site in the western Gulf of Maine, USA: development of an adaptive protocol.

PubMed

Grizzle, R E; Ward, L G; Fredriksson, D W; Irish, J D; Langan, R; Heinig, C S; Greene, J K; Abeels, H A; Peter, C R; Eberhardt, A L

2014-11-15

The seafloor at an open ocean finfish aquaculture facility in the western Gulf of Maine, USA was monitored from 1999 to 2008 by sampling sites inside a predicted impact area modeled by oceanographic conditions and fecal and food settling characteristics, and nearby reference sites. Univariate and multivariate analyses of benthic community measures from box core samples indicated minimal or no significant differences between impact and reference areas. These findings resulted in development of an adaptive monitoring protocol involving initial low-cost methods that required more intensive and costly efforts only when negative impacts were initially indicated. The continued growth of marine aquaculture is dependent on further development of farming methods that minimize negative environmental impacts, as well as effective monitoring protocols. Adaptive monitoring protocols, such as the one described herein, coupled with mathematical modeling approaches, have the potential to provide effective protection of the environment while minimize monitoring effort and costs. Copyright © 2014 Elsevier Ltd. All rights reserved.

A streamlined failure mode and effects analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ford, Eric C., E-mail: eford@uw.edu; Smith, Koren; Terezakis, Stephanie

Purpose: Explore the feasibility and impact of a streamlined failure mode and effects analysis (FMEA) using a structured process that is designed to minimize staff effort. Methods: FMEA for the external beam process was conducted at an affiliate radiation oncology center that treats approximately 60 patients per day. A structured FMEA process was developed which included clearly defined roles and goals for each phase. A core group of seven people was identified and a facilitator was chosen to lead the effort. Failure modes were identified and scored according to the FMEA formalism. A risk priority number,RPN, was calculated and usedmore » to rank failure modes. Failure modes with RPN > 150 received safety improvement interventions. Staff effort was carefully tracked throughout the project. Results: Fifty-two failure modes were identified, 22 collected during meetings, and 30 from take-home worksheets. The four top-ranked failure modes were: delay in film check, missing pacemaker protocol/consent, critical structures not contoured, and pregnant patient simulated without the team's knowledge of the pregnancy. These four failure modes hadRPN > 150 and received safety interventions. The FMEA was completed in one month in four 1-h meetings. A total of 55 staff hours were required and, additionally, 20 h by the facilitator. Conclusions: Streamlined FMEA provides a means of accomplishing a relatively large-scale analysis with modest effort. One potential value of FMEA is that it potentially provides a means of measuring the impact of quality improvement efforts through a reduction in risk scores. Future study of this possibility is needed.« less

A compilation of technology spinoffs from the US Space Shuttle Program

NASA Technical Reports Server (NTRS)

Jackson, David Jeff

1993-01-01

As the successful transfer of NASA-developed technology is a stated mission of NASA, the documentation of such transfer is vital in support of the program. The purpose of this report is to document technology transfer, i.e. 'spinoffs', from the U.S. Space Shuttle Program to the commercial sector. These spinoffs have their origin in the many scientific and engineering fields associated with the shuttle program and, as such, span many diverse commercial applications. These applications include, but are not limited to, consumer products, medicine, industrial productivity, manufacturing technology, public safety, resources management, materials processing, transportation, energy, computer technology, construction, and environmental applications. To aide to the generation of this technology spinoff list, significant effort was made to establish numerous and complementary sources of information. The primary sources of information used in compiling this list include: the NASA 'Spinoff' publication, NASA Tech Briefs, the Marshall Space Flight Center (MSFC) Technology Utilization (TU) Office, the NASA Center for Aerospace Information (CASI), the NASA COSMIC Software Center, and MSFC laboratory and contractor personnel. A complete listing of resources may be found in the bibliography of this report. Additionally, effort was made to insure that the obtained information was placed in electronic database form to insure that the subsequent updating would be feasible with minimal effort.

Translating the Simulation of Procedural Drilling Techniques for Interactive Neurosurgical Training

PubMed Central

Stredney, Don; Rezai, Ali R.; Prevedello, Daniel M.; Elder, J. Bradley; Kerwin, Thomas; Hittle, Bradley; Wiet, Gregory J.

2014-01-01

Background Through previous and concurrent efforts, we have developed a fully virtual environment to provide procedural training of otologic surgical technique. The virtual environment is based on high-resolution volumetric data of the regional anatomy. This volumetric data helps drive an interactive multi-sensory, i.e., visual (stereo), aural (stereo), and tactile simulation environment. Subsequently, we have extended our efforts to support the training of neurosurgical procedural technique as part of the CNS simulation initiative. Objective The goal of this multi-level development is to deliberately study the integration of simulation technologies into the neurosurgical curriculum and to determine their efficacy in teaching minimally invasive cranial and skull base approaches. Methods We discuss issues of biofidelity as well as our methods to provide objective, quantitative automated assessment for the residents. Results We conclude with a discussion of our experiences by reporting on preliminary formative pilot studies and proposed approaches to take the simulation to the next level through additional validation studies. Conclusion We have presented our efforts to translate an otologic simulation environment for use in the neurosurgical curriculum. We have demonstrated the initial proof of principles and define the steps to integrate and validate the system as an adjuvant to the neurosurgical curriculum. PMID:24051887

Periodic-disturbance accommodating control of the space station for asymptotic momentum management

NASA Technical Reports Server (NTRS)

Warren, Wayne; Wie, Bong

1989-01-01

Periodic maneuvering control is developed for asymptotic momentum management of control gyros used as primary actuating devices for the Space Station. The proposed controller utilizes the concepts of quaternion feedback control and periodic-disturbance accommodation to achieve oscillations about the constant torque equilibrium attitude, while minimizing the control effort required. Three-axis coupled equations of motion, written in terms of quaternions, are derived for roll/yaw controller design and stability analysis. It is shown that the quaternion feedback controller is very robust for a wide range of pitch angles. It is also shown that the proposed controller tunes the open-loop unstable vehicle to a stable oscillatory motion which minimizes the control effort needed for steady-state operations.

[Development and future of minimally invasive surgery in western China].

PubMed

Yu, Peiwu; Hao, Yingxue

2017-03-25

There are vast land and lots of people in western China, but the economy developing is relatively slow. However, the minimally invasive surgery was carried out firstly in China. Moreover, the type, number and difficulty of the minimally invasive surgery increased year by year. Especially, in the western area of China, Dr Zhou Zongguang, Yu Peiwu and Zheng Shuguo et al. have performed much pioneering work in laparoscopic surgery for rectal cancer, gastric cancer and laparoscopic liver resection. They led the standard development of minimally invasive in China. In the future, western China should continue to strengthen the standardized training of minimally invasive surgery, make great effort to carry out evidence-based research of minimally invasive surgery, provide evidences of high level of clinical application in minimally invasive surgery. At the same time, we should carry out the robotic and 3D laparoscopic surgery actively, leading the development of minimally invasive surgery more standardized and more widespread in western China.

A Practical Guide for Improving Transparency and Reproducibility in Neuroimaging Research

PubMed Central

Poldrack, Russell A.

2016-01-01

Recent years have seen an increase in alarming signals regarding the lack of replicability in neuroscience, psychology, and other related fields. To avoid a widespread crisis in neuroimaging research and consequent loss of credibility in the public eye, we need to improve how we do science. This article aims to be a practical guide for researchers at any stage of their careers that will help them make their research more reproducible and transparent while minimizing the additional effort that this might require. The guide covers three major topics in open science (data, code, and publications) and offers practical advice as well as highlighting advantages of adopting more open research practices that go beyond improved transparency and reproducibility. PMID:27389358

High-efficiency high-brightness diode lasers at 1470 nm/1550 nm for medical and defense applications

NASA Astrophysics Data System (ADS)

Gallup, Kendra; Ungar, Jeff; Vaissie, Laurent; Lammert, Rob; Hu, Wentao

2012-03-01

Diode lasers in the 1400 nm to 1600 nm regime are used in a variety of applications including pumping Er:YAG lasers, range finding, materials processing, aesthetic medical treatments and surgery. In addition to the compact size, efficiency, and low cost advantages of traditional diode lasers, high power semiconductor lasers in the eye-safe regime are becoming widely used in an effort to minimize the unintended impact of potentially hazardous scattered optical radiation from the laser source, the optical delivery system, or the target itself. In this article we describe the performance of high efficiency high brightness InP laser bars at 1470nm and 1550nm developed at QPC Lasers for applications ranging from surgery to rangefinding.

Software Development and Test Methodology for a Distributed Ground System

NASA Technical Reports Server (NTRS)

Ritter, George; Guillebeau, Pat; McNair, Ann R. (Technical Monitor)

2002-01-01

The Marshall Space Flight Center's (MSFC) Payload Operations Center (POC) ground system has evolved over a period of about 10 years. During this time the software processes have migrated from more traditional to more contemporary development processes in an effort to minimize unnecessary overhead while maximizing process benefits. The Software processes that have evolved still emphasize requirements capture, software configuration management, design documenting, and making sure the products that have been developed are accountable to initial requirements. This paper will give an overview of how the Software Processes have evolved, highlighting the positives as well as the negatives. In addition, we will mention the COTS tools that have been integrated into the processes and how the COTS have provided value to the project.

Asteroid Crew Segment Mission Lean Development

NASA Technical Reports Server (NTRS)

Gard, Joseph; McDonald, Mark

2014-01-01

Asteroid Retrieval Crewed Mission (ARCM) requires a minimum set of Key Capabilities compared in the context of the baseline EM-1/2 Orion and SLS capabilities. These include: Life Support & Human Systems Capabilities; Mission Kit Capabilities; Minimizing the impact to the Orion and SLS development schedules and funding. Leveraging existing technology development efforts to develop the kits adds functionality to Orion while minimizing cost and mass impact.

Energy, Weatherization and Indoor Air Quality

EPA Pesticide Factsheets

Climate change presents many challenges, including the production of severe weather events. These events and efforts to minimize their effects through weatherization can adversely affect indoor environments.

Documentary effort.

PubMed

2006-01-01

This spring, Virtua Health, the largest health system in Southern New Jersey, launched an innovative campaign aimed at raising overall awareness of its facilities by documenting real-life patients undergoing a variety of experiences (e.g., breast cancer, high-risk pregnancy, spine surgery, and minimally-invasive knee replacement surgery). The effort, called "The Virtua Experience" became a 30-minute hospital documentary that aired on Philadelphia's NBC affiliate this summer.

Japanese and Taiwanese pelagic longline fleet dynamics and the impacts of climate change in the southern Indian Ocean

NASA Astrophysics Data System (ADS)

Michael, P. E.; Wilcox, C.; Tuck, G. N.; Hobday, A. J.; Strutton, P. G.

2017-06-01

Climate change is projected to continue shifting the distribution of marine species, leading to changes in local assemblages and different interactions with human activities. With regard to fisheries, understanding the relationship between fishing fleets, target species catch per unit effort (CPUE), and the environment enhances our ability to anticipate fisher response and is an essential step towards proactive management. Here, we explore the potential impact of climate change in the southern Indian Ocean by modelling Japanese and Taiwanese pelagic longline fleet dynamics. We quantify the mean and variability of target species CPUE and the relative value and cost of fishing in different areas. Using linear mixed models, we identify fleet-specific effort allocation strategies most related to observed effort and predict the future distribution of effort and tuna catch under climate change for 2063-2068. The Japanese fleet's strategy targets high-value species and minimizes the variability in CPUE of the primary target species. Conversely, the Taiwanese strategy indicated flexible targeting of a broad range of species, fishing in areas of high and low variability in catch, and minimizing costs. The projected future mean and variability in CPUE across species suggest a slight increase in CPUE in currently high CPUE areas for most species. The corresponding effort projections suggest a slight increase in Japanese effort in the western and eastern study area, and Taiwanese effort increasing east of Madagascar. This approach provides a useful method for managers to explore the impacts of different fishing and fleet management strategies for the future.

The role of vision, speed, and attention in overcoming directional biases during arm movements.

PubMed

Dounskaia, Natalia; Goble, Jacob A

2011-03-01

Previous research has revealed directional biases (preferences to select movements in specific directions) during horizontal arm movements with the use of a free-stroke drawing task. The biases were interpreted as a result of a tendency to generate motion at either the shoulder or elbow (leading joint) and move the other (subordinate) joint predominantly passively to avoid neural effort for control of interaction torque. Here, we examined influence of vision, movement speed, and attention on the directional biases. Participants performed the free-stroke drawing task, producing center-out strokes in randomly selected directions. Movements were performed with and without vision and at comfortable and fast pace. A secondary, cognitive task was used to distract attention. Preferred directions remained the same in all conditions. Bias strength mildly increased without vision, especially during fast movements. Striking increases in bias strength were caused by the secondary task, pointing to additional cognitive load associated with selection of movements in the non-preferred directions. Further analyses demonstrated that the tendency to minimize active interference with interaction torque at the subordinate joint matched directional biases in all conditions. This match supports the explanation of directional biases as a result of a tendency to minimize neural effort for interaction torque control. The cognitive load may enhance this tendency in two ways, directly, by reducing neural capacity for interaction torque control, and indirectly, by decreasing capacity of working memory that stores visited directions. The obtained results suggest strong directional biases during daily activities because natural arm movements usually subserve cognitive tasks.

2013 Los Alamos National Laboratory Hazardous Waste Minimization Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salzman, Sonja L.; English, Charles J.

2015-08-24

Waste minimization and pollution prevention are inherent goals within the operating procedures of Los Alamos National Security, LLC (LANS). The US Department of Energy (DOE) and LANS are required to submit an annual hazardous waste minimization report to the New Mexico Environment Department (NMED) in accordance with the Los Alamos National Laboratory (LANL or the Laboratory) Hazardous Waste Facility Permit. The report was prepared pursuant to the requirements of Section 2.9 of the LANL Hazardous Waste Facility Permit. This report describes the hazardous waste minimization program (a component of the overall Waste Minimization/Pollution Prevention [WMin/PP] Program) administered by the Environmentalmore » Stewardship Group (ENV-ES). This report also supports the waste minimization and pollution prevention goals of the Environmental Programs Directorate (EP) organizations that are responsible for implementing remediation activities and describes its programs to incorporate waste reduction practices into remediation activities and procedures. LANS was very successful in fiscal year (FY) 2013 (October 1-September 30) in WMin/PP efforts. Staff funded four projects specifically related to reduction of waste with hazardous constituents, and LANS won four national awards for pollution prevention efforts from the National Nuclear Security Administration (NNSA). In FY13, there was no hazardous, mixedtransuranic (MTRU), or mixed low-level (MLLW) remediation waste generated at the Laboratory. More hazardous waste, MTRU waste, and MLLW was generated in FY13 than in FY12, and the majority of the increase was related to MTRU processing or lab cleanouts. These accomplishments and analysis of the waste streams are discussed in much more detail within this report.« less

The practice of pre-marketing safety assessment in drug development.

PubMed

Chuang-Stein, Christy; Xia, H Amy

2013-01-01

The last 15 years have seen a substantial increase in efforts devoted to safety assessment by statisticians in the pharmaceutical industry. While some of these efforts were driven by regulations and public demand for safer products, much of the motivation came from the realization that there is a strong need for a systematic approach to safety planning, evaluation, and reporting at the program level throughout the drug development life cycle. An efficient process can help us identify safety signals early and afford us the opportunity to develop effective risk minimization plan early in the development cycle. This awareness has led many pharmaceutical sponsors to set up internal systems and structures to effectively conduct safety assessment at all levels (patient, study, and program). In addition to process, tools have emerged that are designed to enhance data review and pattern recognition. In this paper, we describe advancements in the practice of safety assessment during the premarketing phase of drug development. In particular, we share examples of safety assessment practice at our respective companies, some of which are based on recommendations from industry-initiated working groups on best practice in recent years.

Overview of Heat Addition and Efficiency Predictions for an Advanced Stirling Convertor

NASA Technical Reports Server (NTRS)

Wilson, Scott D.; Reid, Terry V.; Schifer, Nicholas A.; Briggs, Maxwell H.

2012-01-01

The U.S. Department of Energy (DOE) and Lockheed Martin Space Systems Company (LMSSC) have been developing the Advanced Stirling Radioisotope Generator (ASRG) for use as a power system for space science missions. This generator would use two high-efficiency Advanced Stirling Convertors (ASCs), developed by Sunpower Inc. and NASA Glenn Research Center (GRC). The ASCs convert thermal energy from a radioisotope heat source into electricity. As part of ground testing of these ASCs, different operating conditions are used to simulate expected mission conditions. These conditions require achieving a particular operating frequency, hot end and cold end temperatures, and specified electrical power output for a given net heat input. Microporous bulk insulation is used in the ground support test hardware to minimize the loss of thermal energy from the electric heat source to the environment. The insulation package is characterized before operation to predict how much heat will be absorbed by the convertor and how much will be lost to the environment during operation. In an effort to validate these predictions, numerous tasks have been performed, which provided a more accurate value for net heat input into the ASCs. This test and modeling effort included: (a) making thermophysical property measurements of test setup materials to provide inputs to the numerical models, (b) acquiring additional test data that was collected during convertor tests to provide numerical models with temperature profiles of the test setup via thermocouple and infrared measurements, (c) using multidimensional numerical models (computational fluid dynamics code) to predict net heat input of an operating convertor, and (d) using validation test hardware to provide direct comparison of numerical results and validate the multidimensional numerical models used to predict convertor net heat input. This effort produced high fidelity ASC net heat input predictions, which were successfully validated using specially designed test hardware enabling measurement of heat transferred through a simulated Stirling cycle. The overall effort and results are discussed.

AF Cr(VI) Minimize Roadmap: Phase 1 Results

DTIC Science & Technology

2010-12-01

Environmental Technology Technical Symposium & Workshop, 30 Nov ? 2 Dec 2010, Washington, DC. Sponsored by SERDP and ESTCP. 14. ABSTRACT Hexavalent chromium ...unclassified c. THIS PAGE unclassified Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std Z39-18 Minimizing Hexavalent Chromium Use in DoD...Operations Technical Session No. 2B C-40 CURRENT STATE OF AIR FORCE HEXAVALENT CHROMIUM REDUCTION EFFORTS MR. CARL PERAZZOLA Air Force Corrosion

Using benchmarking to minimize common DOE waste streams: Volume 5. Office paper waste

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levin, V.

Finding innovative ways to reduce waste streams generated at US Department of Energy (DOE) sites by 50% by the year 2000 is a challenge for DOE`s waste minimization efforts. A team composed of members from several DOE facilities used the quality tool known as benchmarking to improve waste minimization efforts. First the team examined office waste generation and handling processes at their sites. Then team members developed telephone and written questionnaires to help identify potential ``best-in-class`` industry partners willing to share information about their best waste minimization techniques and technologies. The team identified two benchmarking partners, NIKE, Inc., in Beaverton,more » Oregon, and Microsoft, Inc., in Redmond, Washington. Both companies have proactive, employee-driven environmental issues programs. Both companies report strong employee involvement, management commitment, and readily available markets for recyclable materials such as white paper and nonwhite assorted paper. The availability of markets, the initiative and cooperation of employees, and management support are the main enablers for their programs. At both companies, recycling and waste reduction programs often cut across traditional corporate divisions such as procurement, janitorial services, environmental compliance, grounds maintenance, cafeteria operations, surplus sales, and shipping and receiving. These companies exhibited good cooperation between these functions to design and implement recycling and waste reduction programs.« less

Periodic-disturbance accommodating control of the space station for asymptotic momentum management

NASA Technical Reports Server (NTRS)

Warren, Wayne; Wie, Bong; Geller, David

1989-01-01

Periodic-disturbance accommodating control is investigated for asymptotic momentum management of control moment gyros used as primary actuating devices for the Space Station. The proposed controller utilizes the concepts of quaternion feedback control and periodic-disturbance accommodation to achieve oscillations about the constant torque equilibrium attitude, while minimizing the control effort required. Three-axis coupled equations of motion, written in terms of quaternions, are derived for roll/yaw controller design and stability analysis. The quaternion feedback controller designed using the linear-quadratic regulator synthesis technique is shown to be robust for a wide range of pitch angles. It is also shown that the proposed controller tunes the open-loop unstable vehicle to a stable oscillatory motion which minimizes the control effort needed for steady-state operations.

Evidence-Based Recommendations for Optimizing Light in Day-to-Day Spaceflight Operations

NASA Technical Reports Server (NTRS)

Whitmire, Alexandra; Leveton, Lauren; Barger, Laura; Clark, Toni; Bollweg, Laura; Ohnesorge, Kristine; Brainard, George

2015-01-01

NASA Behavioral Health and Performance Element (BHP) personnel have previously reported on efforts to transition evidence-based recommendations for a flexible lighting system on the International Space Station (ISS). Based on these recommendations, beginning in 2016 the ISS will replace the current fluorescent-based lights with an LED-based system to optimize visual performance, facilitate circadian alignment, promote sleep, and hasten schedule shifting. Additional efforts related to lighting countermeasures in spaceflight operations have also been underway. As an example, a recent BHP research study led by investigators at Harvard Medical School and Brigham and Women's Hospital, evaluated the acceptability, feasibility, and effectiveness of blue-enriched light exposure during exercise breaks for flight controllers working the overnight shift in the Mission Control Center (MCC) at NASA Johnson Space Center. This effort, along with published laboratory studies that have demonstrated the effectiveness of appropriately timed light for promoting alertness, served as an impetus for new light options, and educational protocols for flight controllers. In addition, a separate set of guidelines related to the light emitted from electronic devices, were provided to the Astronaut Office this past year. These guidelines were based on an assessment led by NASA's Lighting Environment Test Facility that included measuring the spectral power distribution, irradiance, and radiance of light emitted from ISS-grade laptops and I-Pads, as well as Android devices. Evaluations were conducted with and without the use of off-the-shelf screen filters as well as a software application that touts minimizing the short-wave length of the visible light spectrum. This presentation will focus on the transition for operations process related to lighting countermeasures in the MCC, as well as the evidence to support recommendations for optimal use of laptops, I-Pads, and Android devices during all phases of spaceflight operations.

Adapting Buildings for Indoor Air Quality in a Changing Climate

EPA Pesticide Factsheets

Climate change presents many challenges, including the production of severe weather events. These events and efforts to minimize their effects through weatherization can adversely affect indoor environments.

Single-Step BLUP with Varying Genotyping Effort in Open-Pollinated Picea glauca.

PubMed

Ratcliffe, Blaise; El-Dien, Omnia Gamal; Cappa, Eduardo P; Porth, Ilga; Klápště, Jaroslav; Chen, Charles; El-Kassaby, Yousry A

2017-03-10

Maximization of genetic gain in forest tree breeding programs is contingent on the accuracy of the predicted breeding values and precision of the estimated genetic parameters. We investigated the effect of the combined use of contemporary pedigree information and genomic relatedness estimates on the accuracy of predicted breeding values and precision of estimated genetic parameters, as well as rankings of selection candidates, using single-step genomic evaluation (HBLUP). In this study, two traits with diverse heritabilities [tree height (HT) and wood density (WD)] were assessed at various levels of family genotyping efforts (0, 25, 50, 75, and 100%) from a population of white spruce ( Picea glauca ) consisting of 1694 trees from 214 open-pollinated families, representing 43 provenances in Québec, Canada. The results revealed that HBLUP bivariate analysis is effective in reducing the known bias in heritability estimates of open-pollinated populations, as it exposes hidden relatedness, potential pedigree errors, and inbreeding. The addition of genomic information in the analysis considerably improved the accuracy in breeding value estimates by accounting for both Mendelian sampling and historical coancestry that were not captured by the contemporary pedigree alone. Increasing family genotyping efforts were associated with continuous improvement in model fit, precision of genetic parameters, and breeding value accuracy. Yet, improvements were observed even at minimal genotyping effort, indicating that even modest genotyping effort is effective in improving genetic evaluation. The combined utilization of both pedigree and genomic information may be a cost-effective approach to increase the accuracy of breeding values in forest tree breeding programs where shallow pedigrees and large testing populations are the norm. Copyright © 2017 Ratcliffe et al.

ENERGY AND SCIENCE: Five-Year Bibliography 1990-1994

DTIC Science & Technology

1995-12-01

reviews the U.S. government’s efforts to support Venezuela’s energy sector. Sector de Energia en Venezuela: La Prodnccion Petrolera y las Condiciones... renovate existing laboratories or build new ones is often minimal. Four of the eight agencies recently started up task forces to reexamine their research...laboratory repairs. Moreover, funding to renovate existing laboratories or build new ones is often minimal. Four of the eight agencies recently started up

Developing and Implementing Monitoring and Evaluation Methods in the New Era of Expanded Care and Treatment of HIV/AIDS

ERIC Educational Resources Information Center

Wolf, R. Cameron; Bicego, George; Marconi, Katherine; Bessinger, Ruth; van Praag, Eric; Noriega-Minichiello, Shanti; Pappas, Gregory; Fronczak, Nancy; Peersman, Greet; Fiorentino, Renee K.; Rugg, Deborah; Novak, John

2004-01-01

The sharp rise in the HIV/AIDS burden worldwide has elicited calls for increased efforts to combat the spread and impact of HIV/AIDS. Efforts must continue with the aim to decrease new infections. At the same time, care and treatment services for those already infected can lead to longer, productive lives, thereby minimizing negative effects on…

Food applications of natural antimicrobial compounds.

PubMed

Lucera, Annalisa; Costa, Cristina; Conte, Amalia; Del Nobile, Matteo A

2012-01-01

In agreement with the current trend of giving value to natural and renewable resources, the use of natural antimicrobial compounds, particularly in food and biomedical applications, becomes very frequent. The direct addition of natural compounds to food is the most common method of application, even if numerous efforts have been made to find alternative solutions to the aim of avoiding undesirable inactivation. Dipping, spraying, and coating treatment of food with active solutions are currently applied to product prior to packaging as valid options. The aim of the current work is to give an overview on the use of natural compounds in food sector. In particular, the review will gather numerous case-studies of meat, fish, dairy products, minimally processed fruit and vegetables, and cereal-based products where these compounds found application.

Food applications of natural antimicrobial compounds

PubMed Central

Lucera, Annalisa; Costa, Cristina; Conte, Amalia; Del Nobile, Matteo A.

2012-01-01

In agreement with the current trend of giving value to natural and renewable resources, the use of natural antimicrobial compounds, particularly in food and biomedical applications, becomes very frequent. The direct addition of natural compounds to food is the most common method of application, even if numerous efforts have been made to find alternative solutions to the aim of avoiding undesirable inactivation. Dipping, spraying, and coating treatment of food with active solutions are currently applied to product prior to packaging as valid options. The aim of the current work is to give an overview on the use of natural compounds in food sector. In particular, the review will gather numerous case-studies of meat, fish, dairy products, minimally processed fruit and vegetables, and cereal-based products where these compounds found application. PMID:23060862

Bounding the Failure Probability Range of Polynomial Systems Subject to P-box Uncertainties

NASA Technical Reports Server (NTRS)

Crespo, Luis G.; Kenny, Sean P.; Giesy, Daniel P.

2012-01-01

This paper proposes a reliability analysis framework for systems subject to multiple design requirements that depend polynomially on the uncertainty. Uncertainty is prescribed by probability boxes, also known as p-boxes, whose distribution functions have free or fixed functional forms. An approach based on the Bernstein expansion of polynomials and optimization is proposed. In particular, we search for the elements of a multi-dimensional p-box that minimize (i.e., the best-case) and maximize (i.e., the worst-case) the probability of inner and outer bounding sets of the failure domain. This technique yields intervals that bound the range of failure probabilities. The offset between this bounding interval and the actual failure probability range can be made arbitrarily tight with additional computational effort.

Multi-level Hierarchical Poly Tree computer architectures

NASA Technical Reports Server (NTRS)

Padovan, Joe; Gute, Doug

1990-01-01

Based on the concept of hierarchical substructuring, this paper develops an optimal multi-level Hierarchical Poly Tree (HPT) parallel computer architecture scheme which is applicable to the solution of finite element and difference simulations. Emphasis is given to minimizing computational effort, in-core/out-of-core memory requirements, and the data transfer between processors. In addition, a simplified communications network that reduces the number of I/O channels between processors is presented. HPT configurations that yield optimal superlinearities are also demonstrated. Moreover, to generalize the scope of applicability, special attention is given to developing: (1) multi-level reduction trees which provide an orderly/optimal procedure by which model densification/simplification can be achieved, as well as (2) methodologies enabling processor grading that yields architectures with varying types of multi-level granularity.

Biocatalytic production of D-tagatose: A potential rare sugar with versatile applications.

PubMed

Jayamuthunagai, J; Gautam, P; Srisowmeya, G; Chakravarthy, M

2017-11-02

D-tagatose is a naturally existing rare monosaccharide having prebiotic properties. Minimal absorption, low metabolizing energy, and unique clinical properties are the characteristics of D-tagatose. D-tagatose gained international attention by matching the purpose of alternate sweeteners that is much needed for the control of diabetes among world population. Recent efforts in understanding tagatose bioconversion have generated essential information regarding its production and application. This article reviews the evolution of D-tagatose as an important rare sugar by appreciable improvements in production results and its significant applications resulted of its unique physical, chemical, biological, and clinical properties thus considering it an appropriate product for requisite improvements in technical viability. Based on current knowledge and technology projections, the commercialization of D-tagatose rare sugar as food additive is close to reality.

Mishap risk control for advanced aerospace/composite materials

NASA Technical Reports Server (NTRS)

Olson, John M.

1994-01-01

Although advanced aerospace materials and advanced composites provide outstanding performance, they also present several unique post-mishap environmental, safety, and health concerns. The purpose of this paper is to provide information on some of the unique hazards and concerns associated with these materials when damaged by fire, explosion, or high-energy impact. Additionally, recommended procedures and precautions are addressed as they pertain to all phases of a composite aircraft mishap response, including fire-fighting, investigation, recovery, clean-up, and guidelines are general in nature and not application-specific. The goal of this project is to provide factual and realistic information which can be used to develop consistent and effective procedures and policies to minimize the potential environmental, safety, and health impacts of a composite aircraft mishap response effort.

Drug utilization review: mechanisms to improve its effectiveness and broaden its scope. The U.S. Pharmacopeia Drug Utilization Review Advisory Panel.

PubMed

2000-01-01

To address important problems and needed changes in online and retrospective drug utilization review (DUR) programs. Emphasis is placed on reliability of DUR criteria and the shift of traditional retrospective DUR programs toward disease management and health care outcomes. Published literature evaluating the role of online and retrospective DUR programs. Particular attention was given to studies assessing DUR criteria reliability and new interventions with retrospective DUR programs. A literature review was conducted along with an expert summary from the U.S. Pharmacopeia Drug Utilization Review Advisory Panel. Studies have revealed variations in DUR criteria that could be affecting clinical practice and patient care. Appropriate formal methodologies and use of consistent procedures in developing online prospective DUR programs and systems could help resolve these problems. Traditional retrospective DUR is also shifting to incorporate disease management and methodologies from health outcomes and pharmacoeconomics studies. Refinements are needed to improve the reliability and validity of online DUR criteria and to minimize false positive messages. Databases created as a result of DUR efforts have been used in new and innovative ways to incorporate health outcomes data and disease management interventions. Additional outcomes data, combined with quality assurance efforts, should increase the utility of DUR/disease management efforts in evaluating health systems while improving the effectiveness and efficiency of pharmacists' health care interventions.

Stem cell origins and animal models of hepatocellular carcinoma.

PubMed

Aravalli, Rajagopal N; Steer, Clifford J; Sahin, M Behnan; Cressman, Erik N K

2010-05-01

Hepatocellular carcinoma (HCC) is a common malignant tumor that almost always occurs within a preexisting background of chronic liver disease and cirrhosis. Currently, medical therapy is not effective in treating most HCC, and the only hope of cure is either resection or liver transplantation. A small minority of patients is eligible for these therapies, which entail major morbidity at the very least. In spite of immense scientific advances during the past 3 decades, patient survival has improved very little. In order to reduce morbidity and mortality from HCC, improvements in early diagnosis and development of novel local and systemic therapies for advanced disease are essential, in addition to efforts geared towards primary prevention. Studies with experimental animal models that closely mimic human disease are very valuable in understanding physiological, cellular and molecular mechanisms underlying the disease. Furthermore, appropriate animal models have the potential to increase our understanding of the effects of image-guided minimally invasive therapies and thereby help to improve such therapies. In this review, we examine the evidence for stem cell origins of such tumors, critically evaluate existing models and reflect on how to develop new models for minimally invasive, image-guided treatment of HCC.

Panel Flutter Emulation Using a Few Concentrated Forces

NASA Astrophysics Data System (ADS)

Dhital, Kailash; Han, Jae-Hung

2018-04-01

The objective of this paper is to study the feasibility of panel flutter emulation using a few concentrated forces. The concentrated forces are considered to be equivalent to aerodynamic forces. The equivalence is carried out using surface spline method and principle of virtual work. The structural modeling of the plate is based on the classical plate theory and the aerodynamic modeling is based on the piston theory. The present approach differs from the linear panel flutter analysis in scheming the modal aerodynamics forces with unchanged structural properties. The solutions for the flutter problem are obtained numerically using the standard eigenvalue procedure. A few concentrated forces were considered with an optimization effort to decide their optimal locations. The optimization process is based on minimizing the error between the flutter bounds from emulated and linear flutter analysis method. The emulated flutter results for the square plate of four different boundary conditions using six concentrated forces are obtained with minimal error to the reference value. The results demonstrated the workability and viability of using concentrated forces in emulating real panel flutter. In addition, the paper includes the parametric studies of linear panel flutter whose proper literatures are not available.

Megabase sequencing of human genome by ordered-shotgun-sequencing (OSS) strategy

NASA Astrophysics Data System (ADS)

Chen, Ellson Y.

1997-05-01

So far we have used OSS strategy to sequence over 2 megabases DNA in large-insert clones from regions of human X chromosomes with different characteristic levels of GC content. The method starts by randomly fragmenting a BAC, YAC or PAC to 8-12 kb pieces and subcloning those into lambda phage. Insert-ends of these clones are sequenced and overlapped to create a partial map. Complete sequencing is then done on a minimal tiling path of selected subclones, recursively focusing on those at the edges of contigs to facilitate mergers of clones across the entire target. To reduce manual labor, PCR processes have been adapted to prepare sequencing templates throughout the entire operation. The streamlined process can thus lend itself to further automation. The OSS approach is suitable for large- scale genomic sequencing, providing considerable flexibility in the choice of subclones or regions for more or less intensive sequencing. For example, subclones containing contaminating host cell DNA or cloning vector can be recognized and ignored with minimal sequencing effort; regions overlapping a neighboring clone already sequenced need not be redone; and segments containing tandem repeats or long repetitive sequences can be spotted early on and targeted for additional attention.

Automation of the Environmental Control and Life Support System

NASA Technical Reports Server (NTRS)

Dewberry, Brandon S.; Carnes, J. Ray

1990-01-01

The objective of the Environmental Control and Life Support System (ECLSS) Advanced Automation Project is to recommend and develop advanced software for the initial and evolutionary Space Station Freedom (SSF) ECLS system which will minimize the crew and ground manpower needed for operations. Another objective includes capturing ECLSS design and development knowledge for future missions. This report summarizes our results from Phase I, the ECLSS domain analysis phase, which we broke down into three steps: 1) Analyze and document the baselined ECLS system, 2) envision as our goal an evolution to a fully automated regenerative life support system, built upon an augmented baseline, and 3) document the augmentations (hooks and scars) and advanced software systems which we see as necessary in achieving minimal manpower support for ECLSS operations. In addition, Phase I included development of an advanced software life cycle testing tools will be used in the development of the software. In this way, we plan in preparation for phase II and III, the development and integration phases, respectively. Automated knowledge acquisition, engineering, verification, and can capture ECLSS development knowledge for future use, develop more robust and complex software, provide feedback to the KBS tool community, and insure proper visibility of our efforts.

Nuclear measurement of subgrade moisture.

DOT National Transportation Integrated Search

1973-01-01

The basic consideration in evaluating subgrade moisture conditions under pavements is the selection of a method of determining moisture contents that is sufficiently accurate and can be used with minimal effort, interference with traffic, and recalib...

Strategies to Minimize Antibiotic Resistance

PubMed Central

Lee, Chang-Ro; Cho, Ill Hwan; Jeong, Byeong Chul; Lee, Sang Hee

2013-01-01

Antibiotic resistance can be reduced by using antibiotics prudently based on guidelines of antimicrobial stewardship programs (ASPs) and various data such as pharmacokinetic (PK) and pharmacodynamic (PD) properties of antibiotics, diagnostic testing, antimicrobial susceptibility testing (AST), clinical response, and effects on the microbiota, as well as by new antibiotic developments. The controlled use of antibiotics in food animals is another cornerstone among efforts to reduce antibiotic resistance. All major resistance-control strategies recommend education for patients, children (e.g., through schools and day care), the public, and relevant healthcare professionals (e.g., primary-care physicians, pharmacists, and medical students) regarding unique features of bacterial infections and antibiotics, prudent antibiotic prescribing as a positive construct, and personal hygiene (e.g., handwashing). The problem of antibiotic resistance can be minimized only by concerted efforts of all members of society for ensuring the continued efficiency of antibiotics. PMID:24036486

Robotics-based synthesis of human motion.

PubMed

Khatib, O; Demircan, E; De Sapio, V; Sentis, L; Besier, T; Delp, S

2009-01-01

The synthesis of human motion is a complex procedure that involves accurate reconstruction of movement sequences, modeling of musculoskeletal kinematics, dynamics and actuation, and characterization of reliable performance criteria. Many of these processes have much in common with the problems found in robotics research. Task-based methods used in robotics may be leveraged to provide novel musculoskeletal modeling methods and physiologically accurate performance predictions. In this paper, we present (i) a new method for the real-time reconstruction of human motion trajectories using direct marker tracking, (ii) a task-driven muscular effort minimization criterion and (iii) new human performance metrics for dynamic characterization of athletic skills. Dynamic motion reconstruction is achieved through the control of a simulated human model to follow the captured marker trajectories in real-time. The operational space control and real-time simulation provide human dynamics at any configuration of the performance. A new criteria of muscular effort minimization has been introduced to analyze human static postures. Extensive motion capture experiments were conducted to validate the new minimization criterion. Finally, new human performance metrics were introduced to study in details an athletic skill. These metrics include the effort expenditure and the feasible set of operational space accelerations during the performance of the skill. The dynamic characterization takes into account skeletal kinematics as well as muscle routing kinematics and force generating capacities. The developments draw upon an advanced musculoskeletal modeling platform and a task-oriented framework for the effective integration of biomechanics and robotics methods.

Clinical implications from daily physiotherapy examination of 131 acute hamstring injuries and their association with running speed and rehabilitation progression.

PubMed

Whiteley, Rod; van Dyk, Nicol; Wangensteen, Arnlaug; Hansen, Clint

2018-03-01

To investigate the association of daily clinical measures and the progression of rehabilitation and perceived running effort. A cohort of 131 athletes with an MRI-confirmed acute hamstring injury underwent a standardised criteria-based rehabilitation protocol. Descriptive and inferential statistics were used to investigate the association between daily clinical subjective and objective measures and both the progression of rehabilitation and perceived running effort. These measures included different strength, palpation, flexibility and functional tests. Inter-rater and intrarater reliability and minimal detectable change were established for the clinical measures of strength and flexibility by examining measures taken on consecutive days for the uninjured leg. The progression of the daily measures was seen to be non-linear and varied according to the measure. Intra-rater reliability for the strength and flexibility measures were excellent (95% CI ≥0.85 for all measures). Strength (in the outer range position) and flexibility (in maximum hip flexion with active knee extension (MHFAKE) in supine) were best associated with rehabilitation progression and perceived running effort. Additionally, length of pain on palpation was usefully associated with rehabilitation progression. At lower perceived running effort there was a large variation in actual running speed. Daily physical measures of palpation pain, outer range strength, MHFAKE and reported pain during daily activity are useful to inform the progression of rehabilitation. NCT01812564 and NCT02104258. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Impacts of rural development on Yellowstone wildlife: linking grizzly bear Ursus arctos demographics with projected residential growth

USGS Publications Warehouse

Schwartz, Charles C.; Gude, Patricia H.; Landenburger, Lisa; Haroldson, Mark A.; Podruzny, Shannon

2012-01-01

Exurban development is consuming wildlife habitat within the Greater Yellowstone Ecosystem with potential consequences to the long-term conservation of grizzly bears Ursus arctos. We assessed the impacts of alternative future land-use scenarios by linking an existing regression-based simulation model predicting rural development with a spatially explicit model that predicted bear survival. Using demographic criteria that predict population trajectory, we portioned habitats into either source or sink, and projected the loss of source habitat associated with four different build out (new home construction) scenarios through 2020. Under boom growth, we predicted that 12 km2 of source habitat were converted to sink habitat within the Grizzly Bear Recovery Zone (RZ), 189 km2 were converted within the current distribution of grizzly bears outside of the RZ, and 289 km2 were converted in the area outside the RZ identified as suitable grizzly bear habitat. Our findings showed that extremely low densities of residential development created sink habitats. We suggest that tools, such as those outlined in this article, in addition to zoning and subdivision regulation may prove more practical, and the most effective means of retaining large areas of undeveloped land and conserving grizzly bear source habitat will likely require a landscape-scale approach. We recommend a focus on land conservation efforts that retain open space (easements, purchases and trades) coupled with the implementation of ‘bear community programmes’ on an ecosystem wide basis in an effort to minimize human-bear conflicts, minimize management-related bear mortalities associated with preventable conflicts and to safeguard human communities. Our approach has application to other species and areas, and it has illustrated how spatially explicit demographic models can be combined with models predicting land-use change to help focus conservation priorities.

In vitro screening techniques for reactive metabolites for minimizing bioactivation potential in drug discovery.

PubMed

Prakash, Chandra; Sharma, Raman; Gleave, Michelle; Nedderman, Angus

2008-11-01

Drug induced toxicity remains one of the major reasons for failures of new pharmaceuticals, and for the withdrawal of approved drugs from the market. Efforts are being made to reduce attrition of drug candidates, and to minimize their bioactivation potential in the early stages of drug discovery in order to bring safer compounds to the market. Therefore, in addition to potency and selectivity; drug candidates are now selected on the basis of acceptable metabolism/toxicology profiles in preclinical species. To support this, new approaches have been developed, which include extensive in vitro methods using human and animal hepatic cellular and subcellular systems, recombinant human drug metabolizing enzymes, increased automation for higher-throughput screens, sensitive analytical technologies and in silico computational models to assess the metabolism aspects of the new chemical entities. By using these approaches many compounds that might have serious adverse reactions associated with them are effectively eliminated before reaching clinical trials, however some toxicities such as those caused by idiosyncratic responses, are not detected until a drug is in late stages of clinical trials or has become available to the market. One of the proposed mechanisms for the development of idiosyncratic drug toxicity is the bioactivation of drugs to form reactive metabolites by drug metabolizing enzymes. This review discusses the different approaches to, and benefits of using existing in vitro techniques, for the detection of reactive intermediates in order to minimize bioactivation potential in drug discovery.

TED: A Tolerant Edit Distance for segmentation evaluation.

PubMed

Funke, Jan; Klein, Jonas; Moreno-Noguer, Francesc; Cardona, Albert; Cook, Matthew

2017-02-15

In this paper, we present a novel error measure to compare a computer-generated segmentation of images or volumes against ground truth. This measure, which we call Tolerant Edit Distance (TED), is motivated by two observations that we usually encounter in biomedical image processing: (1) Some errors, like small boundary shifts, are tolerable in practice. Which errors are tolerable is application dependent and should be explicitly expressible in the measure. (2) Non-tolerable errors have to be corrected manually. The effort needed to do so should be reflected by the error measure. Our measure is the minimal weighted sum of split and merge operations to apply to one segmentation such that it resembles another segmentation within specified tolerance bounds. This is in contrast to other commonly used measures like Rand index or variation of information, which integrate small, but tolerable, differences. Additionally, the TED provides intuitive numbers and allows the localization and classification of errors in images or volumes. We demonstrate the applicability of the TED on 3D segmentations of neurons in electron microscopy images where topological correctness is arguable more important than exact boundary locations. Furthermore, we show that the TED is not just limited to evaluation tasks. We use it as the loss function in a max-margin learning framework to find parameters of an automatic neuron segmentation algorithm. We show that training to minimize the TED, i.e., to minimize crucial errors, leads to higher segmentation accuracy compared to other learning methods. Copyright © 2016. Published by Elsevier Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luther, Erik Paul; Leckie, Rafael M.; Dombrowski, David E.

This supplemental report describes fuel fabrication efforts conducted for the Idaho National Laboratory Trade Study for the TREAT Conversion project that is exploring the replacement of the HEU (Highly Enriched Uranium) fuel core of the TREAT reactor with LEU (Low Enriched Uranium) fuel. Previous reports have documented fabrication of fuel by the “upgrade” process developed at Los Alamos National Laboratory. These experiments supplement an earlier report that describes efforts to increase the graphite content of extruded fuel and minimize cracking.

Risk of bias and confounding of observational studies of Zika virus infection: A scoping review of research protocols

PubMed Central

Haby, Michelle M.; Martínez-Vega, Ruth; Pinzón-Flores, Carlos E.; Smith, Emma; Pinart, Mariona; Broutet, Nathalie; Becerra-Posada, Francisco; Aldighieri, Sylvain; Van Kerkhove, Maria D.

2017-01-01

Introduction Given the severity and impact of the current Zika virus (ZIKV) outbreak in the Americas, numerous countries have rushed to develop research studies to assess ZIKV and its potential health consequences. In an effort to ensure that studies are comprehensive, both internally and externally valid, and with reliable results, the World Health Organization, the Pan American Health Organization, Institut Pasteur, the networks of Fiocruz, the Consortia for the Standardization of Influenza Seroepidemiology (CONSISE) and the International Severe Acute Respiratory and Emerging Infection Consortium (ISARIC) have generated six standardized clinical and epidemiological research protocols and questionnaires to address key public health questions on ZIKV. Methods We conducted a systematic search of ongoing study protocols related to ZIKV research. We analyzed the content of protocols of 32 cohort studies and 13 case control studies for systematic bias that could produce erroneous results. Additionally we aimed to characterize the risks of bias and confounding in observational studies related to ZIKV and to propose ways to minimize them, including the use of six newly standardized research protocols. Results Observational studies of ZIKV face an array of challenges, including measurement of exposure and outcomes (microcephaly and Guillain-Barré Syndrome). Potential confounders need to be measured where known and controlled for in the analysis. Selection bias due to non-random selection is a significant issue, particularly in the case-control design, and losses to follow-up is equally important for the cohort design. Conclusion Observational research seeking to answer key questions on the ZIKV should consider these restrictions and take precautions to minimize bias in an effort to provide reliable and valid results. Utilization of the standardized research protocols developed by the WHO, PAHO, Institut Pasteur, and CONSISE will harmonize the key methodological aspects of each study design to minimize bias at different stages of the study. Biases need to be considered by researchers implementing the standardized protocols as well as by users of observational epidemiological studies of ZIKV. PMID:28686621

Accelerating Use of Sustainable Materials in Transportation Infrastructure

DOT National Transportation Integrated Search

2016-05-01

With the push towards sustainable design of highway infrastructure systems owners have shown interest in leveraging materials with minimal environmental impacts and extended service lives. Within this emphasis most efforts on sustainable material des...

Construction Monitoring of Soft Ground Rapid Transit Tunnels : Volume 2. Appendixes.

DOT National Transportation Integrated Search

1974-11-01

The Urban Mass Transportation Administration (UMTA) Tunneling Program Concentrates its efforts on reducing tunneling costs, minimizing environmental impact and enhancing safety as it applies to the planning, organization, design, construction and mai...

The Integration of COTS/GOTS within NASA's HST Command and Control System

NASA Technical Reports Server (NTRS)

Pfarr, Thomas; Reis, James E.; Obenschain, Arthur F. (Technical Monitor)

2001-01-01

NASA's mission critical Hubble Space Telescope (HST) command and control system has been re-engineered with COTS/GOTS and minimal custom code. This paper focuses on the design of this new HST Control Center System (CCS) and the lessons learned throughout its development. CCS currently utilizes 31 COTS/GOTS products with an additional 12 million lines of custom glueware code; the new CCS exceeds the capabilities of the original system while significantly reducing the lines of custom code by more than 50%. The lifecycle of COTS/GOTS products will be examined including the pack-age selection process, evaluation process, and integration process. The advantages, disadvantages, issues, concerns, and lessons teamed for integrating COTS/GOTS into the NASA's mission critical HST CCS will be examined in detail. Command and control systems designed with traditional custom code development efforts will be compared with command and control systems designed with new development techniques relying heavily on COTS/COTS integration. This paper will reveal the many hidden costs of COTS/GOTS solutions when compared to traditional custom code development efforts; this paper will show the high cost of COTS/GOTS solutions including training expenses, consulting fees, and long-term maintenance expenses.

CFD analysis of turbopump volutes

NASA Technical Reports Server (NTRS)

Ascoli, Edward P.; Chan, Daniel C.; Darian, Armen; Hsu, Wayne W.; Tran, Ken

1993-01-01

An effort is underway to develop a procedure for the regular use of CFD analysis in the design of turbopump volutes. Airflow data to be taken at NASA Marshall will be used to validate the CFD code and overall procedure. Initial focus has been on preprocessing (geometry creation, translation, and grid generation). Volute geometries have been acquired electronically and imported into the CATIA CAD system and RAGGS (Rockwell Automated Grid Generation System) via the IGES standard. An initial grid topology has been identified and grids have been constructed for turbine inlet and discharge volutes. For CFD analysis of volutes to be used regularly, a procedure must be defined to meet engineering design needs in a timely manner. Thus, a compromise must be established between making geometric approximations, the selection of grid topologies, and possible CFD code enhancements. While the initial grid developed approximated the volute tongue with a zero thickness, final computations should more accurately account for the geometry in this region. Additionally, grid topologies will be explored to minimize skewness and high aspect ratio cells that can affect solution accuracy and slow code convergence. Finally, as appropriate, code modifications will be made to allow for new grid topologies in an effort to expedite the overall CFD analysis process.

Weight loss in overweight patients maintained on atypical antipsychotic agents.

PubMed

Centorrino, F; Wurtman, J J; Duca, K A; Fellman, V H; Fogarty, K V; Berry, J M; Guay, D M; Romeling, M; Kidwell, J; Cincotta, S L; Baldessarini, R J

2006-06-01

Weight gain and associated medical morbidity offset the reduction of extrapyramidal side effects associated with atypical antipsychotics. Efforts to control weight in antipsychotic-treated patients have yielded limited success. We studied the impact of an intensive 24-week program of diet, exercise, and counseling in 17 chronically psychotic patients (10 women, seven men) who entered at high average body weight (105.0+/-18.4 kg) and body mass index (BMI) (36.6+/-4.6 kg/m(2)). A total of 12 subjects who completed the initial 24 weeks elected to participate in an additional 24-week, less intensive extension phase. By 24 weeks, weight-loss/patient averaged 6.0 kg (5.7%) and BMI decreased to 34.5 (by 5.7%). Blood pressure decreased from 130/83 to 116/74 (11% improvement), pulse fell slightly, and serum cholesterol and triglyceride concentrations changed nonsignificantly. With less intensive management for another 24 weeks, subjects regained minimal weight (0.43 kg). These findings add to the emerging view that weight gain is a major health problem associated with modern antipsychotic drugs and that labor-intensive weight-control efforts in patients requiring antipsychotic treatment yield clinically promising benefits. Improved treatments without weight-gain risk are needed.

Modernization of NASA's Johnson Space Center Chamber: A Liquid Nitrogen System to Support Cryogenic Vacuum Optical Testing of the James Webb Space Telescope (JWST)

NASA Technical Reports Server (NTRS)

Garcia, Sammy; Homan, Jonathan; Montz, Michael

2016-01-01

NASA is the mission lead for the James Webb Space Telescope (JWST), the next of the “Great Observatories”, scheduled for launch in 2018. It is directly responsible for the integration and test (I&T) program that will culminate in an end-to-end cryo vacuum optical test of the flight telescope and instrument module in Chamber A at NASA Johnson Space Center. Historic Chamber A is the largest thermal vacuum chamber at Johnson Space Center and one of the largest space simulation chambers in the world. Chamber A has undergone a major modernization effort to support the deep cryogenic, vacuum and cleanliness requirements for testing the JWST. This paper describes the steps performed in efforts to convert the existing the 60’s era Liquid Nitrogen System from a forced flow (pumped) process to a natural circulation (thermo-siphon) process. In addition, the paper will describe the dramatic conservation of liquid nitrogen to support the long duration thermal vacuum testing. Lastly, describe the simplistic and effective control system which results in zero to minimal human inputs during steady state conditions.

Public opinion about the source separation of municipal solid waste in Shanghai, China.

PubMed

Zhang, Weiqian; Che, Yue; Yang, Kai; Ren, Xiangyu; Tai, Jun

2012-12-01

For decades the generation of municipal solid waste (MSW) in Shanghai has been increasing. Despite the long-time efforts aimed at MSW management (MSWM), the disposal of MSW achieves poor performance. Thus, a MSW minimisation plan for Shanghai was proposed in December 2010. In this study, direct face-to-face interviews and a structured questionnaire survey were used in four different Shanghai community types. We conducted an econometric analysis of the social factors that influence the willingness to pay for MSW separation and discussed the household waste characteristics, the daily waste generation and the current treatment of kitchen wastes. The results suggested that the respondents are environmentally aware of separation, but only practise minimal separation. Negative neighbour effects, confused classification of MSW, and mixed transportation and disposal are the dominant limitations of MSW source-separated collection. Most respondents are willing to pay for MSWM. Public support is influenced by household population, income and cost. The attitudes and behaviours of citizens are important for reducing the amount of MSW disposal by 50% per capita by 2020 (relative to 2010). Concerted efforts should be taken to enlarge pilot areas. In addition, the source separation of kitchen wastes should be promoted.

DOE Office of Scientific and Technical Information (OSTI.GOV)

H.Zhang, P. Titus, P. Rogoff, A.Zolfaghari, D. Mangra, M. Smith

The National Spherical Torus Experiment (NSTX) is a low aspect ratio, spherical torus (ST) configuration device which is located at Princeton Plasma Physics Laboratory (PPPL) This device is presently being updated to enhance its physics by doubling the TF field to 1 Tesla and increasing the plasma current to 2 Mega-amperes. The upgrades include a replacement of the centerstack and addition of a second neutral beam. The upgrade analyses have two missions. The first is to support design of new components, principally the centerstack, the second is to qualify existing NSTX components for higher loads, which will increase by amore » factor of four. Cost efficiency was a design goal for new equipment qualification, and reanalysis of the existing components. Showing that older components can sustain the increased loads has been a challenging effort in which designs had to be developed that would limit loading on weaker components, and would minimize the extent of modifications needed. Two areas representing this effort have been chosen to describe in more details: analysis of the current distribution in the new TF inner legs, and, second, analysis of the out-of-plane support of the existing TF outer legs.« less

'Uncrunching' time: medical schools' use of social media for faculty development.

PubMed

Cahn, Peter S; Benjamin, Emelia J; Shanahan, Christopher W

2013-06-27

The difficulty of attracting attendance for in-person events is a problem common to all faculty development efforts. Social media holds the potential to disseminate information asynchronously while building a community through quick, easy-to-use formats. The authors sought to document creative uses of social media for faculty development in academic medical centers. In December 2011, the first author (P.S.C.) examined the websites of all 154 accredited medical schools in the United States and Canada for pages relevant to faculty development. The most popular social media sites and searched for accounts maintained by faculty developers in academic medicine were also visited. Several months later, in February 2012, a second investigator (C.W.S.) validated these data via an independent review. Twenty-two (22) medical schools (14.3%) employed at least one social media technology in support of faculty development. In total, 40 instances of social media tools were identified--the most popular platforms being Facebook (nine institutions), Twitter (eight institutions), and blogs (eight institutions). Four medical schools, in particular, have developed integrated strategies to engage faculty in online communities. Although relatively few medical schools have embraced social media to promote faculty development, the present range of such uses demonstrates the flexibility and affordability of the tools. The most popular tools incorporate well into faculty members' existing use of technology and require minimal additional effort. Additional research into the benefits of engaging faculty through social media may help overcome hesitation to invest in new technologies.

Advancing Cervical Cancer Prevention in India: Implementation Science Priorities

PubMed Central

Madsen, Emily; Porterfield, Deborah; Varghese, Beena

2013-01-01

Cervical cancer is the leading cause of cancer mortality in India, accounting for 17% of all cancer deaths among women aged 30 to 69 years. At current incidence rates, the annual burden of new cases in India is projected to increase to 225,000 by 2025, but there are few large-scale, organized cervical cancer prevention programs in the country. We conducted a review of the cervical cancer prevention research literature and programmatic experiences in India to summarize the current state of knowledge and practices and recommend research priorities to address the gap in services. We found that research and programs in India have demonstrated the feasibility and acceptability of cervical cancer prevention efforts and that screening strategies requiring minimal additional human resources and laboratory infrastructure can reduce morbidity and mortality. However, additional evidence generated through implementation science research is needed to ensure that cervical cancer prevention efforts have the desired impact and are cost-effective. Specifically, implementation science research is needed to understand individual- and community-level barriers to screening and diagnostic and treatment services; to improve health care worker performance; to strengthen links among screening, diagnosis, and treatment; and to determine optimal program design, outcomes, and costs. With a quarter of the global burden of cervical cancer in India, there is no better time than now to translate research findings to practice. Implementation science can help ensure that investments in cervical cancer prevention and control result in the greatest impact. PMID:24217555

'Uncrunching' time: medical schools' use of social media for faculty development.

PubMed

Cahn, Peter S; Benjamin, Emelia J; Shanahan, Christopher W

2013-01-01

Purpose The difficulty of attracting attendance for in-person events is a problem common to all faculty development efforts. Social media holds the potential to disseminate information asynchronously while building a community through quick, easy-to-use formats. The authors sought to document creative uses of social media for faculty development in academic medical centers. Method In December 2011, the first author (P.S.C.) examined the websites of all 154 accredited medical schools in the United States and Canada for pages relevant to faculty development. The most popular social media sites and searched for accounts maintained by faculty developers in academic medicine were also visited. Several months later, in February 2012, a second investigator (C.W.S.) validated these data via an independent review. Results Twenty-two (22) medical schools (14.3%) employed at least one social media technology in support of faculty development. In total, 40 instances of social media tools were identified - the most popular platforms being Facebook (nine institutions), Twitter (eight institutions), and blogs (eight institutions). Four medical schools, in particular, have developed integrated strategies to engage faculty in online communities. Conclusions Although relatively few medical schools have embraced social media to promote faculty development, the present range of such uses demonstrates the flexibility and affordability of the tools. The most popular tools incorporate well into faculty members' existing use of technology and require minimal additional effort. Additional research into the benefits of engaging faculty through social media may help overcome hesitation to invest in new technologies.

Revitalization model of tapioca industry through environmental awareness reinforcement for minimizing water body contamination

NASA Astrophysics Data System (ADS)

Banowati, E.; Indriyanti, D. R.; Juhadi

2018-03-01

Tapioca industry in Margoyoso District is a household industry which positively contributes to the growth of the region's economy as it is able to absorb 6,61% of productive age populationor absorb 3,300 workers.On the other hand, the industry impacts contamination of river water in the form of pollutants dissolved materials and particulates into water bodies so that the quality of water decreases even does not work anymore in accordance with the allocation for irrigation or run off of agriculture. The purpose of this research is to: strengthen environmental awareness; calculate the success of the reinforcement action and minimize water body contamination. The research was conducted in two villages of tapioca industry center in Margoyoso district - Pati Regency Administration Area. The determination coefficient of R Square is 0.802 which indicates a successful effort of 80.2%. Regression equation Y = 34.097 + 0.608 X. Industrial entrepreneur's concern increased on 8.45 from total indicator or position to 70.72 so that the gradual effort showed success to minimize water contamination of Suwatu River. The business community of tapioca should build installation of wastewater treatment.

The Preventive Control of a Dengue Disease Using Pontryagin Minimum Principal

NASA Astrophysics Data System (ADS)

Ratna Sari, Eminugroho; Insani, Nur; Lestari, Dwi

2017-06-01

Behaviour analysis for host-vector model without control of dengue disease is based on the value of basic reproduction number obtained using next generation matrices. Furthermore, the model is further developed involving a preventive control to minimize the contact between host and vector. The purpose is to obtain an optimal preventive strategy with minimal cost. The Pontryagin Minimum Principal is used to find the optimal control analytically. The derived optimality model is then solved numerically to investigate control effort to reduce infected class.

Risk-based requirements management framework with applications to assurance cases

NASA Astrophysics Data System (ADS)

Feng, D.; Eyster, C.

The current regulatory approach for assuring device safety primarily focuses on compliance with prescriptive safety regulations and relevant safety standards. This approach, however, does not always lead to a safe system design even though safety regulations and standards have been met. In the medical device industry, several high profile recalls involving infusion pumps have prompted the regulatory agency to reconsider how device safety should be managed, reviewed and approved. An assurance case has been cited as a promising tool to address this growing concern. Assurance cases have been used in safety-critical systems for some time. Most assurance cases, if not all, in literature today are developed in an ad hoc fashion, independent from risk management and requirement development. An assurance case is a resource-intensive endeavor that requires additional effort and documentation from equipment manufacturers. Without a well-organized requirements infrastructure in place, such “ additional effort” can be substantial, to the point where the cost of adoption outweighs the benefit of adoption. In this paper, the authors present a Risk-Based Requirements and Assurance Management (RBRAM) methodology. The RBRAM is an elaborate framework that combines Risk-Based Requirements Management (RBRM) with assurance case methods. Such an integrated framework can help manufacturers leverage an existing risk management to present a comprehensive assurance case with minimal additional effort while providing a supplementary means to reexamine the integrity of the system design in terms of the mission objective. Although the example used is from the medical industry, the authors believe that the RBRAM methodology underlines the fundamental principle of risk management, and offers a simple, yet effective framework applicable to aerospace industry, perhaps, to any industry.

7 CFR 3430.36 - Procedures to minimize or eliminate duplication of effort.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... Business processes may include the review of the Current and Pending Support Form; documented CRIS searches... participation in Federal Government-wide and other committees, taskforces, or groups that seek to solve problems...

7 CFR 3430.36 - Procedures to minimize or eliminate duplication of effort.

Code of Federal Regulations, 2012 CFR

2012-01-01

.... Business processes may include the review of the Current and Pending Support Form; documented CRIS searches... participation in Federal Government-wide and other committees, taskforces, or groups that seek to solve problems...

7 CFR 3430.36 - Procedures to minimize or eliminate duplication of effort.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... Business processes may include the review of the Current and Pending Support Form; documented CRIS searches... participation in Federal Government-wide and other committees, taskforces, or groups that seek to solve problems...

Measuring Room Area or Volume Electronically

NASA Technical Reports Server (NTRS)

Kavaya, M. J.

1987-01-01

Area- and volume-measuring instrument hand-held or mounted on tripod. Instrument rapidly measures distances to walls, ceiling, or floor at many viewing angles and automatically computes area or volume of room. Results obtained rapidly with minimal effort.

High-Performance Polyimide Powder Coatings

NASA Technical Reports Server (NTRS)

2008-01-01

Much of the infrastructure at Kennedy Space Center and other NASA sites has been subjected to outside weathering effects for more than 40 years. Because much of this infrastructure has metallic surfaces, considerable effort is continually devoted to developing methods to minimize the effects of corrosion on these surfaces. These efforts are especially intense at KSC, where offshore salt spray and exhaust from Solid Rocket Boosters accelerate corrosion. Coatings of various types have traditionally been the choice for minimizing corrosion, and improved corrosion control methods are constantly being researched. Recent work at KSC on developing an improved method for repairing Kapton (polyimide)-based electrical wire insulation has identified polyimides with much lower melting points than traditional polyimides used for insulation. These lower melting points and the many other outstanding physical properties of polyimides (thermal stability, chemical resistance, and electrical properties) led us to investigate whether they could be used in powder coatings.

Cut set-based risk and reliability analysis for arbitrarily interconnected networks

DOEpatents

Wyss, Gregory D.

2000-01-01

Method for computing all-terminal reliability for arbitrarily interconnected networks such as the United States public switched telephone network. The method includes an efficient search algorithm to generate minimal cut sets for nonhierarchical networks directly from the network connectivity diagram. Efficiency of the search algorithm stems in part from its basis on only link failures. The method also includes a novel quantification scheme that likewise reduces computational effort associated with assessing network reliability based on traditional risk importance measures. Vast reductions in computational effort are realized since combinatorial expansion and subsequent Boolean reduction steps are eliminated through analysis of network segmentations using a technique of assuming node failures to occur on only one side of a break in the network, and repeating the technique for all minimal cut sets generated with the search algorithm. The method functions equally well for planar and non-planar networks.

The Design & Development of the Ocean Color Instrument Precision Superduplex Hybrid Bearing Cartridge

NASA Technical Reports Server (NTRS)

Schepis, Joseph; Woodard, Timothy; Hakun, Claef; Bergandy, Konrad; Church, Joseph; Ward, Peter; Lee, Michael; Conti, Alfred; Guzek, Jeffrey

2018-01-01

A high precision, high-resolution Ocean Color Imaging (OCI) instrument is under development for the Plankton, Aerosol, Cloud, ocean Ecosystem (PACE) mission which requires a pair of medium speed mechanisms to scan the ocean surface continuously. The design of the rotating telescope (RT) mechanism operating at 360 RPM and the half-angle mirror (HAM) mechanism synchronized at 180 RPM was concern for maintaining pointing precision over the required life and continuous operations. An effort was undertaken with the manufacturer to design and analyze a special bearing configuration to minimize axial and radial runout, minimize torque, and maintain nominal contact stresses and stiffness over the operating temperature range and to maximize life. The bearing design, development effort, analysis and testing will be discussed as will the technical challenges that this specific design imposed upon the mechanism engineers. Bearing performance, runout as achieved and verified during encoder installation and operating torque will be described.

Toward a Rational and Mechanistic Account of Mental Effort.

PubMed

Shenhav, Amitai; Musslick, Sebastian; Lieder, Falk; Kool, Wouter; Griffiths, Thomas L; Cohen, Jonathan D; Botvinick, Matthew M

2017-07-25

In spite of its familiar phenomenology, the mechanistic basis for mental effort remains poorly understood. Although most researchers agree that mental effort is aversive and stems from limitations in our capacity to exercise cognitive control, it is unclear what gives rise to those limitations and why they result in an experience of control as costly. The presence of these control costs also raises further questions regarding how best to allocate mental effort to minimize those costs and maximize the attendant benefits. This review explores recent advances in computational modeling and empirical research aimed at addressing these questions at the level of psychological process and neural mechanism, examining both the limitations to mental effort exertion and how we manage those limited cognitive resources. We conclude by identifying remaining challenges for theoretical accounts of mental effort as well as possible applications of the available findings to understanding the causes of and potential solutions for apparent failures to exert the mental effort required of us.

New Frameworks for Detecting and Minimizing Information Leakage in Anonymized Network Data

DTIC Science & Technology

2011-10-01

researcher the exact extent to which a particular utility is affected by the anonymization. For instance, Karr et al.’s use of the Kullback - Leibler ...technical, legal, policy, and privacy issues limit the ability of operators to produce data sets for information security testing . In an effort to...technical, legal, policy, and privacy issues limit the ability of operators to produce datasets for information security testing . In an effort to help

Rendezvous strategy impacts on CTV avionics design, system reliability requirements, and available collision avoidance maneuvers

NASA Technical Reports Server (NTRS)

Donovan, William J.; Davis, John E.

1991-01-01

Rockwell International is conducting an ongoing program to develop avionics architectures that provide high intrinsic value while meeting all mission objectives. Studies are being conducted to determine alternative configurations that have low life-cycle cost and minimum development risk, and that minimize launch delays while providing the reliability level to assure a successful mission. This effort is based on four decades of providing ballistic missile avionics to the United States Air Force and has focused on the requirements of the NASA Cargo Transfer Vehicle (CTV) program in 1991. During the development of architectural concepts it became apparent that rendezvous strategy issues have an impact on the architecture of the avionics system. This is in addition to the expected impact on propulsion and electrical power duration, flight profiles, and trajectory during approach.

Husbandry of wild-caught song sparrows (Melospiza melodia).

PubMed

Smith, Lori; Hallager, Sara; Kendrick, Erin; Hope, Katharine; Danner, Raymond M

2018-05-08

Conservation and research efforts occasionally rely upon bringing wild animals into human care to establish breeding programs and to understand their biology. Wild-caught birds may have husbandry requirements that differ from captive-reared animals due, in part, to their social development in the wild and potential exposure to novel pathogens. We developed husbandry techniques to minimize stress and monitor health in a population of wild-caught song sparrows (Melospiza melodia). We describe enclosure conditions, diet and enrichment, and best practices for stress reduction. In addition, we describe several health monitoring strategies, including assessing feces quality, body condition scores, and specific signs of infection. These techniques led to successful housing of song sparrows during formal behavioral and developmental studies. This information will be useful for guiding the husbandry of wild-caught passerine birds in the future. © 2018 Wiley Periodicals, Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harkenrider, Matthew M., E-mail: mharkenrider@lumc.edu; Alite, Fiori; Silva, Scott R.

Cervical cancer is a disease that requires considerable multidisciplinary coordination of care and labor in order to maximize tumor control and survival while minimizing treatment-related toxicity. As with external beam radiation therapy, the use of advanced imaging and 3-dimensional treatment planning has generated a paradigm shift in the delivery of brachytherapy for the treatment of cervical cancer. The use of image-based brachytherapy, most commonly with magnetic resonance imaging (MRI), requires additional attention and effort by the treating physician to prescribe dose to the proper volume and account for adjacent organs at risk. This represents a dramatic change from the classicmore » Manchester approach of orthogonal radiographic images and prescribing dose to point A. We reviewed the history and currently evolving data and recommendations for the clinical use of image-based brachytherapy with an emphasis on MRI-based brachytherapy.« less

Integrating Automation into a Multi-Mission Operations Center

NASA Technical Reports Server (NTRS)

Surka, Derek M.; Jones, Lori; Crouse, Patrick; Cary, Everett A, Jr.; Esposito, Timothy C.

2007-01-01

NASA Goddard Space Flight Center's Space Science Mission Operations (SSMO) Project is currently tackling the challenge of minimizing ground operations costs for multiple satellites that have surpassed their prime mission phase and are well into extended mission. These missions are being reengineered into a multi-mission operations center built around modern information technologies and a common ground system infrastructure. The effort began with the integration of four SMEX missions into a similar architecture that provides command and control capabilities and demonstrates fleet automation and control concepts as a pathfinder for additional mission integrations. The reengineered ground system, called the Multi-Mission Operations Center (MMOC), is now undergoing a transformation to support other SSMO missions, which include SOHO, Wind, and ACE. This paper presents the automation principles and lessons learned to date for integrating automation into an existing operations environment for multiple satellites.

Development of lithium diffused radiation resistant solar cells, part 2

NASA Technical Reports Server (NTRS)

Payne, P. R.; Somberg, H.

1971-01-01

The work performed to investigate the effect of various process parameters on the performance of lithium doped P/N solar cells is described. Effort was concentrated in four main areas: (1) the starting material, (2) the boron diffusion, (3) the lithium diffusion, and (4) the contact system. Investigation of starting material primarily involved comparison of crucible grown silicon (high oxygen content) and Lopex silicon (low oxygen content). In addition, the effect of varying growing parameters of crucible grown silicon on lithium cell output was also examined. The objective of the boron diffusion studies was to obtain a diffusion process which produced high efficiency cells with minimal silicon stressing and could be scaled up to process 100 or more cells per diffusion. Contact studies included investigating sintering of the TiAg contacts and evaluation of the contact integrity.

Condition-dependent reproductive effort in frogs infected by a widespread pathogen

PubMed Central

Roznik, Elizabeth A.; Sapsford, Sarah J.; Pike, David A.; Schwarzkopf, Lin; Alford, Ross A.

2015-01-01

To minimize the negative effects of an infection on fitness, hosts can respond adaptively by altering their reproductive effort or by adjusting their timing of reproduction. We studied effects of the pathogenic fungus Batrachochytrium dendrobatidis on the probability of calling in a stream-breeding rainforest frog (Litoria rheocola). In uninfected frogs, calling probability was relatively constant across seasons and body conditions, but in infected frogs, calling probability differed among seasons (lowest in winter, highest in summer) and was strongly and positively related to body condition. Infected frogs in poor condition were up to 40% less likely to call than uninfected frogs, whereas infected frogs in good condition were up to 30% more likely to call than uninfected frogs. Our results suggest that frogs employed a pre-existing, plastic, life-history strategy in response to infection, which may have complex evolutionary implications. If infected males in good condition reproduce at rates equal to or greater than those of uninfected males, selection on factors affecting disease susceptibility may be minimal. However, because reproductive effort in infected males is positively related to body condition, there may be selection on mechanisms that limit the negative effects of infections on hosts. PMID:26063847

Quality improvement in hospitals: how much does it reduce healthcare costs?

PubMed

Jones, S B

1995-01-01

The philosophy of W.E. Deming suggests that continuous quality improvement efforts, when properly applied, ultimately will lead to financial dividends and will help ensure business longevity. Reducing hospital charges can be exciting for the participants and can provide an impetus for expanding quality improvement efforts. Americans, however, tend to demand almost instant gratification and have limited patience for longer-term results. This factor, coupled with minimal knowledge of actual operational costs and inaccurate charge accounting systems, may lead hospital managers to misinterpret the potential net long-term effects of their quality improvement efforts. In the approaching environment of capitated reimbursement, such mistakes may have serious consequences.

HABITAT MODELING APPROACHES FOR RESTORATION SITE SELECTION

EPA Science Inventory

Numerous modeling approaches have been used to develop predictive models of species-environment and species-habitat relationships. These models have been used in conservation biology and habitat or species management, but their application to restoration efforts has been minimal...

Computer Simulations: Inelegant Mathematics and Worse Social Science?

ERIC Educational Resources Information Center

Alker, Hayward R., Jr.

1974-01-01

Achievements, limitations, and difficulties of social science simulation efforts are discussed with particular reference to three examples. The pedagogical use of complementary developmental, philosophical, mathematical, and scientific approaches is advocated to minimize potential abuses of social simulation research. (LS)

EPA and States' Collective Efforts Lead to Regulatory Action on Dicamba

EPA Pesticide Factsheets

Agreement with Monsanto, BASF and DuPont on measures to further minimize the potential for drift to damage neighboring crops from the use of dicamba formulations used to control weeds in genetically modified cotton and soybeans.

How do price minimizing behaviors impact smoking cessation? Findings from the International Tobacco Control (ITC) Four Country Survey.

PubMed

Licht, Andrea S; Hyland, Andrew J; O'Connor, Richard J; Chaloupka, Frank J; Borland, Ron; Fong, Geoffrey T; Nargis, Nigar; Cummings, K Michael

2011-05-01

This paper examines how price minimizing behaviors impact efforts to stop smoking. Data on 4,988 participants from the International Tobacco Control Policy Evaluation (ITC) Four-Country Survey who were smokers at baseline (wave 5) and interviewed at a 1 year follow-up were used. We examined whether price minimizing behaviors at baseline predicted: (1) cessation, (2) quit attempts, and (3) successful quit attempts at one year follow up using multivariate logistic regression modeling. A subset analysis included 3,387 participants who were current smokers at waves 5 and 6 and were followed through wave 7 to explore effects of changing purchase patterns on cessation. Statistical tests for interaction were performed to examine the joint effect of SES and price/tax avoidance behaviors on cessation outcomes. Smokers who engaged in any price/tax avoidance behaviors were 28% less likely to report cessation. Persons using low/untaxed sources were less likely to quit at follow up, those purchasing cartons were less likely to make quit attempts and quit, and those using discount cigarettes were less likely to succeed, conditional on making attempts. Respondents who utilized multiple behaviors simultaneously were less likely to make quit attempts and to succeed. SES did not modify the effects of price minimizing behaviors on cessation outcomes. The data from this paper indicate that the availability of lower priced cigarette alternatives may attenuate public health efforts aimed at to reduce reducing smoking prevalence through price and tax increases among all SES groups.

Tradeoffs between physical captures and PIT tag antenna array detections: A case study for the Lower Colorado River Basin population of humpback chub (Gila cypha)

USGS Publications Warehouse

Pearson, Kristen Nicole; Kendall, William L.; Winkelman, Dana L.; Persons, William R.

2016-01-01

A key component of many monitoring programs for special status species involves capture and handling of individuals as part of capture-recapture efforts for tracking population health and demography. Minimizing negative impacts from sampling, such as through reduced handling, aids prevention of negative impacts on species from monitoring efforts. Using simulation analyses, we found that long-term population monitoring techniques, requiring physical capture (i.e. hoop-net sampling), can be reduced and supplemented with passive detections (i.e. PIT tag antenna array detections) without negatively affecting estimates of adult humpback chub (HBC; Gila cypha) survival (S) and skipped spawning probabilities (γ' = spawner transitions to a skipped spawner, γ′ = skipped spawner remains a skipped spawner). Based on our findings of the array’s in situ detection efficiency (0.42), estimability of such demographic parameters would improve over hoop-netting alone. In addition, the array provides insight into HBC population dynamics and movement patterns outside of traditional sampling periods. However, given current timing of sampling efforts, spawner abundance estimates were negatively biased when hoop-netting was reduced, suggesting not all spawning HBC are present during the current sampling events. Despite this, our findings demonstrate that PIT tag antenna arrays, even with moderate potential detectability, may allow for reduced handling of special status species while also offering potentially more efficient monitoring strategies, especially if ideal timing of sampling can be determined.

A multi-objective decision-making approach to the journal submission problem.

PubMed

Wong, Tony E; Srikrishnan, Vivek; Hadka, David; Keller, Klaus

2017-01-01

When researchers complete a manuscript, they need to choose a journal to which they will submit the study. This decision requires to navigate trade-offs between multiple objectives. One objective is to share the new knowledge as widely as possible. Citation counts can serve as a proxy to quantify this objective. A second objective is to minimize the time commitment put into sharing the research, which may be estimated by the total time from initial submission to final decision. A third objective is to minimize the number of rejections and resubmissions. Thus, researchers often consider the trade-offs between the objectives of (i) maximizing citations, (ii) minimizing time-to-decision, and (iii) minimizing the number of resubmissions. To complicate matters further, this is a decision with multiple, potentially conflicting, decision-maker rationalities. Co-authors might have different preferences, for example about publishing fast versus maximizing citations. These diverging preferences can lead to conflicting trade-offs between objectives. Here, we apply a multi-objective decision analytical framework to identify the Pareto-front between these objectives and determine the set of journal submission pathways that balance these objectives for three stages of a researcher's career. We find multiple strategies that researchers might pursue, depending on how they value minimizing risk and effort relative to maximizing citations. The sequences that maximize expected citations within each strategy are generally similar, regardless of time horizon. We find that the "conditional impact factor"-impact factor times acceptance rate-is a suitable heuristic method for ranking journals, to strike a balance between minimizing effort objectives and maximizing citation count. Finally, we examine potential co-author tension resulting from differing rationalities by mapping out each researcher's preferred Pareto front and identifying compromise submission strategies. The explicit representation of trade-offs, especially when multiple decision-makers (co-authors) have different preferences, facilitates negotiations and can support the decision process.

A multi-objective decision-making approach to the journal submission problem

PubMed Central

Hadka, David; Keller, Klaus

2017-01-01

When researchers complete a manuscript, they need to choose a journal to which they will submit the study. This decision requires to navigate trade-offs between multiple objectives. One objective is to share the new knowledge as widely as possible. Citation counts can serve as a proxy to quantify this objective. A second objective is to minimize the time commitment put into sharing the research, which may be estimated by the total time from initial submission to final decision. A third objective is to minimize the number of rejections and resubmissions. Thus, researchers often consider the trade-offs between the objectives of (i) maximizing citations, (ii) minimizing time-to-decision, and (iii) minimizing the number of resubmissions. To complicate matters further, this is a decision with multiple, potentially conflicting, decision-maker rationalities. Co-authors might have different preferences, for example about publishing fast versus maximizing citations. These diverging preferences can lead to conflicting trade-offs between objectives. Here, we apply a multi-objective decision analytical framework to identify the Pareto-front between these objectives and determine the set of journal submission pathways that balance these objectives for three stages of a researcher’s career. We find multiple strategies that researchers might pursue, depending on how they value minimizing risk and effort relative to maximizing citations. The sequences that maximize expected citations within each strategy are generally similar, regardless of time horizon. We find that the “conditional impact factor”—impact factor times acceptance rate—is a suitable heuristic method for ranking journals, to strike a balance between minimizing effort objectives and maximizing citation count. Finally, we examine potential co-author tension resulting from differing rationalities by mapping out each researcher’s preferred Pareto front and identifying compromise submission strategies. The explicit representation of trade-offs, especially when multiple decision-makers (co-authors) have different preferences, facilitates negotiations and can support the decision process. PMID:28582430

An Investigation of Reliability Models for Ceramic Matrix Composites and their Implementation into Finite Element Codes

NASA Technical Reports Server (NTRS)

Duffy, Stephen F.

1998-01-01

The development of modeling approaches for the failure analysis of ceramic-based material systems used in high temperature environments was the primary objective of this research effort. These materials have the potential to support many key engineering technologies related to the design of aeropropulsion systems. Monolithic ceramics exhibit a number of useful properties such as retention of strength at high temperatures, chemical inertness, and low density. However, the use of monolithic ceramics has been limited by their inherent brittleness and a large variation in strength. This behavior has motivated material scientists to reinforce the monolithic material with a ceramic fiber. The addition of a second ceramic phase with an optimized interface increases toughness and marginally increases strength. The primary purpose of the fiber is to arrest crack growth, not to increase strength. The material systems of interest in this research effort were laminated ceramic matrix composites, as well as two- and three- dimensional fabric reinforced ceramic composites. These emerging composite systems can compete with metals in many demanding applications. However, the ongoing metamorphosis of ceramic composite material systems, and the lack of standardized design data has in the past tended to minimize research efforts related to structural analysis. Many structural components fabricated from ceramic matrix composites (CMC) have been designed by "trial and error." The justification for this approach lies in the fact that during the initial developmental phases for a material system fabrication issues are paramount. Emphasis is placed on demonstrating feasibility rather than fully understanding the processes controlling mechanical behavior. This is understandable during periods of rapid improvements in material properties for any composite system. But to avoid the ad hoc approach, the analytical methods developed under this effort can be used to develop rational structural design protocols.

Control strategy of maximum vertical jumps: The preferred countermovement depth may not be fully optimized for jump height.

PubMed

Mandic, Radivoj; Knezevic, Olivera M; Mirkov, Dragan M; Jaric, Slobodan

2016-09-01

The aim of the present study was to explore the control strategy of maximum countermovement jumps regarding the preferred countermovement depth preceding the concentric jump phase. Elite basketball players and physically active non-athletes were tested on the jumps performed with and without an arm swing, while the countermovement depth was varied within the interval of almost 30 cm around its preferred value. The results consistently revealed 5.1-11.2 cm smaller countermovement depth than the optimum one, but the same difference was more prominent in non-athletes. In addition, although the same differences revealed a marked effect on the recorded force and power output, they reduced jump height for only 0.1-1.2 cm. Therefore, the studied control strategy may not be based solely on the countermovement depth that maximizes jump height. In addition, the comparison of the two groups does not support the concept of a dual-task strategy based on the trade-off between maximizing jump height and minimizing the jumping quickness that should be more prominent in the athletes that routinely need to jump quickly. Further research could explore whether the observed phenomenon is based on other optimization principles, such as the minimization of effort and energy expenditure. Nevertheless, future routine testing procedures should take into account that the control strategy of maximum countermovement jumps is not fully based on maximizing the jump height, while the countermovement depth markedly confound the relationship between the jump height and the assessed force and power output of leg muscles.

Fiscal Year 2016 Revegetation Assessment

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nordstrom, Jenifer B.

This report summarizes the Fiscal Year (FY) 2016 Revegetation Assessment by Battelle Energy Alliance, LLC. This assessment was conducted to document revegetation efforts at Idaho National Laboratory to verify restoration of disturbed vegetation and soil at various locations occurs as required. This report provides the following information for projects at Idaho National Laboratory completed during FY 2016 that were identified during the National Environmental Policy Act review process as having the potential to disturb soils or vegetation: 1) A summary of all projects identified as having the potential to require revegetation efforts 2) A summary of site disturbance and restorationmore » efforts of each project. For FY 2016, one project required revegetation and sagebrush restoration. For other projects, implementation of best management practices minimized impacts to vegetation and revegetation efforts were not required.« less

Feasibility of reclaimed asphalt pavement as aggregate in portland cement concrete pavements.

DOT National Transportation Integrated Search

2013-11-01

This research effort was focused on evaluating the feasibility of using minimally processed reclaimed : asphalt pavement (RAP) as aggregate replacement in concrete pavements. This research demonstrated : that concretes with up to 50 percent of the fi...

Taking the 'work' out of networking: strategies for smarter, simpler network architecture and administration

NASA Technical Reports Server (NTRS)

Luna, C. de

2003-01-01

This session will help you tune up your skills and knowledge on the latest advances in network design and management, to keep your agency's data communications running at peak performance, with minimal cost and effort.

Construction Monitoring of Soft Ground Rapid Transit Tunnels : Volume 1. A Definition of Needs and Potential Developments.

DOT National Transportation Integrated Search

1974-11-01

The Urban Mass Transportation Administration (UMTA) Tunneling Program Concentrates its efforts on reducing tunneling costs, minimizing environmental impact and enhancing safety as it applies to the planning, organization, design, construction and mai...

After the Disaster: Restoring Library Service.

ERIC Educational Resources Information Center

Griffith, J. W.

1983-01-01

Discusses precautions which can be taken to minimize loss or damage to library buildings and collections resulting from natural disasters (fires, floods, hurricanes, earthquakes, tornadoes, storms). Preventive measures (alarm systems, interior protection), salvage efforts, restoration of collection and library facility, rebuilding collection and…

Parallel barrier effectiveness : Dulles noise barrier project

DOT National Transportation Integrated Search

1990-05-01

In an effort to minimize the cost and maximize the effectiveness of highway noise barriers, the Federal Highway Administration and a National Pooled Fund Panel (made up of 14 States) funded a field study program on an experimental highway noise barri...

Field demonstration of new bridge approach slab designs and performance.

DOT National Transportation Integrated Search

2014-06-01

The Louisiana Department of Transportation and Development (DOTD) has initiated a major effort to minimize the bridge end bump problem associated : with differential settlement. As a result, a new design for the approach slab was proposed, which requ...

Increased span length for the MGS long-span guardrail system.

DOT National Transportation Integrated Search

2014-12-01

Long-span guardrail systems have been recognized as an effective means of shielding low-fill culverts while : minimizing construction efforts and limiting culvert damage and repair. The current MGS long-span design provided the : capability to span u...

Designing Sustainable Supply Chains for Biofuels

EPA Science Inventory

Driven by the Energy and Independence Act of 2007 mandate to increase production of alternative fuels and to ensure that this increase causes minimal environmental impact, a project to design sustainable biofuel supply chains has been developed. This effort uses life cycle asses...

Design of in-flight fragment separator using high-power primary beams in the energy of a few hundred MeV/u

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kim, J. Y.; Kim, J. W.; Wan, W.

2015-07-15

An in-flight fragment separator usually requires large acceptance and high momentum resolution to minimize the loss of a rare isotope beam of interest produced at a thin target, which is especially important when {sup 238}U fission reactions in the energy of 200 MeV/u are used. The production target and beam dump are located in the pre-separator, where a beam power of up to 400 kW is dissipated. The area is surrounded by thick radiation shielding walls, which result in long drift spaces between adjacent magnetic components at various locations and an asymmetrical layout. Efforts have been made to minimize non-linearmore » effects in the pre-separator beam optics with trials of different separator configurations and correction schemes using COSY Infinity and GICOSY. The main separator is configured to be mirror symmetric such that correction with hexapole and octupole coils can be more readily applied. The separator configuration was finalized to allow the facility design to proceed and the key components including superconducting magnets have been designed and prototyped. In addition, the separator design has been evaluated using LISE++ including a set of wedge degraders at dispersive focal planes to improve the yield and purity of selected isotope beam.« less

An Experimental Approach to Controllably Vary Protein Oxidation While Minimizing Electrode Adsorption for Boron-Doped Diamond Electrochemical Surface Mapping Applications

PubMed Central

McClintock, Carlee S; Hettich, Robert L.

2012-01-01

Oxidative protein surface mapping has become a powerful approach for measuring the solvent accessibility of folded protein structures. A variety of techniques exist for generating the key reagent – hydroxyl radicals – for these measurements; however, these approaches range significantly in their complexity and expense of operation. This research expands upon earlier work to enhance the controllability of boron-doped diamond (BDD) electrochemistry as an easily accessible tool for producing hydroxyl radicals in order to oxidize a range of intact proteins. Efforts to modulate oxidation level while minimizing the adsorption of protein to the electrode involved the use of relatively high flow rates to reduce protein residence time inside the electrochemical flow chamber. Additionally, a different cell activation approach using variable voltage to supply a controlled current allowed us to precisely tune the extent of oxidation in a protein-dependent manner. In order to gain perspective on the level of protein adsorption onto the electrode surface, studies were conducted to monitor protein concentration during electrolysis and gauge changes in the electrode surface between cell activation events. This report demonstrates the successful use of BDD electrochemistry for greater precision in generating a target number of oxidation events upon intact proteins. PMID:23210708

Advances in the Engineering of the Gene Editing Enzymes and the Genomes: Understanding and Handling the Off-Target Effects of CRISPR/Cas9.

PubMed

Yin, Yufang; Wang, Qian; Xiao, Li; Wang, Fengjiao; Song, Zhuo; Zhou, Cuilan; Liu, Xuan; Xing, Chungen; He, Nongyue; Li, Kai; Feng, Yan; Zhang, Jia

2018-03-01

In the past decades, significant progresses have been achieved in genetic engineering of nucleases. Among the genetically engineered nucleases, zinc finger nucleases, transcription activator-like (TAL) effector nucleases, and CRIPSPR/Cas9 system form a new field of gene editing. The gene editing efficiency or targeting effect and the off-target effect are the two major determinant factors in evaluating the usefulness of a new enzyme. Engineering strategies in improving these gene editing enzymes, particularly in minimizing their off-target effects, are the focus of this paper. Examples of using these genetically engineered enzymes in genome modification are discussed in order to better understand the requirement of engineering efforts in obtaining more powerful and useful gene editing enzymes. In addition, the identification of naturally existed anti-Cas proteins has been employed in minimizing off-target effects. Considering the future application in human gene therapy, optimization of these well recognized gene editing enzymes and exploration of more novel enzymes are both required. Before people find an ideal gene editing system having virtually no off-target effect, technologies used to screen and identify off-target effects are of importance in clinical trials employing gene therapy.

Linear feasibility algorithms for treatment planning in interstitial photodynamic therapy

NASA Astrophysics Data System (ADS)

Rendon, A.; Beck, J. C.; Lilge, Lothar

2008-02-01

Interstitial Photodynamic therapy (IPDT) has been under intense investigation in recent years, with multiple clinical trials underway. This effort has demanded the development of optimization strategies that determine the best locations and output powers for light sources (cylindrical or point diffusers) to achieve an optimal light delivery. Furthermore, we have recently introduced cylindrical diffusers with customizable emission profiles, placing additional requirements on the optimization algorithms, particularly in terms of the stability of the inverse problem. Here, we present a general class of linear feasibility algorithms and their properties. Moreover, we compare two particular instances of these algorithms, which are been used in the context of IPDT: the Cimmino algorithm and a weighted gradient descent (WGD) algorithm. The algorithms were compared in terms of their convergence properties, the cost function they minimize in the infeasible case, their ability to regularize the inverse problem, and the resulting optimal light dose distributions. Our results show that the WGD algorithm overall performs slightly better than the Cimmino algorithm and that it converges to a minimizer of a clinically relevant cost function in the infeasible case. Interestingly however, treatment plans resulting from either algorithms were very similar in terms of the resulting fluence maps and dose volume histograms, once the diffuser powers adjusted to achieve equal prostate coverage.

Low-dose CT in clinical diagnostics.

PubMed

Fuentes-Orrego, Jorge M; Sahani, Dushyant V

2013-09-01

Computed tomography (CT) has become key for patient management due to its outstanding capabilities for detecting disease processes and assessing treatment response, which has led to expansion in CT imaging for diagnostic and image-guided therapeutic interventions. Despite these benefits, the growing use of CT has raised concerns as radiation risks associated with radiation exposure. The purpose of this article is to familiarize the reader with fundamental concepts of dose metrics for assessing radiation exposure and weighting radiation-associated risks. The article also discusses general approaches for reducing radiation dose while preserving diagnostic quality. The authors provide additional insight for undertaking protocol optimization, customizing scanning techniques based on the patients' clinical scenario and demographics. Supplemental strategies are postulated using more advanced post-processing techniques for achieving further dose improvements. The technologic offerings of CT are integral to modern medicine and its role will continue to evolve. Although, the estimated risks from low levels of radiation of a single CT exam are uncertain, it is prudent to minimize the dose from CT by applying common sense solutions and using other simple strategies as well as exploiting technologic innovations. These efforts will enable us to take advantage of all the clinical benefits of CT while minimizing the likelihood of harm to patients.

Weighted-density functionals for cavity formation and dispersion energies in continuum solvation models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sundararaman, Ravishankar; Gunceler, Deniz; Arias, T. A.

2014-10-07

Continuum solvation models enable efficient first principles calculations of chemical reactions in solution, but require extensive parametrization and fitting for each solvent and class of solute systems. Here, we examine the assumptions of continuum solvation models in detail and replace empirical terms with physical models in order to construct a minimally-empirical solvation model. Specifically, we derive solvent radii from the nonlocal dielectric response of the solvent from ab initio calculations, construct a closed-form and parameter-free weighted-density approximation for the free energy of the cavity formation, and employ a pair-potential approximation for the dispersion energy. We show that the resulting modelmore » with a single solvent-independent parameter: the electron density threshold (n c), and a single solvent-dependent parameter: the dispersion scale factor (s 6), reproduces solvation energies of organic molecules in water, chloroform, and carbon tetrachloride with RMS errors of 1.1, 0.6 and 0.5 kcal/mol, respectively. We additionally show that fitting the solvent-dependent s 6 parameter to the solvation energy of a single non-polar molecule does not substantially increase these errors. Parametrization of this model for other solvents, therefore, requires minimal effort and is possible without extensive databases of experimental solvation free energies.« less

Weighted-density functionals for cavity formation and dispersion energies in continuum solvation models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sundararaman, Ravishankar; Gunceler, Deniz; Arias, T. A.

2014-10-07

Continuum solvation models enable efficient first principles calculations of chemical reactions in solution, but require extensive parametrization and fitting for each solvent and class of solute systems. Here, we examine the assumptions of continuum solvation models in detail and replace empirical terms with physical models in order to construct a minimally-empirical solvation model. Specifically, we derive solvent radii from the nonlocal dielectric response of the solvent from ab initio calculations, construct a closed-form and parameter-free weighted-density approximation for the free energy of the cavity formation, and employ a pair-potential approximation for the dispersion energy. We show that the resulting modelmore » with a single solvent-independent parameter: the electron density threshold (n{sub c}), and a single solvent-dependent parameter: the dispersion scale factor (s{sub 6}), reproduces solvation energies of organic molecules in water, chloroform, and carbon tetrachloride with RMS errors of 1.1, 0.6 and 0.5 kcal/mol, respectively. We additionally show that fitting the solvent-dependent s{sub 6} parameter to the solvation energy of a single non-polar molecule does not substantially increase these errors. Parametrization of this model for other solvents, therefore, requires minimal effort and is possible without extensive databases of experimental solvation free energies.« less

Preparation and handling of powdered infant formula: a commentary by the ESPGHAN Committee on Nutrition.

PubMed

Agostoni, Carlo; Axelsson, Irene; Goulet, Olivier; Koletzko, Berthold; Michaelsen, Kim F; Puntis, John W L; Rigo, Jacques; Shamir, Raanan; Szajewska, Hania; Turck, Dominique; Vandenplas, Yvan; Weaver, Lawrence T

2004-10-01

Powdered infant formulae are not sterile and may contain pathogenic bacteria. In addition, milk products are excellent media for bacterial proliferation. Multiplication of Enterobacter sakazakii in prepared formula feeds can cause devastating sepsis, particularly in the first 2 months of life. In approximately 50 published case reports of severe infection, there are high rates of meningitis, brain abscesses and necrotizing enterocolitis, with an overall mortality from 33% to 80%. Breast feeding provides effective protection against infection, one of the many reasons why it deserves continued promotion and support. To minimize the risk of infection in infants not fully breastfed, recommendations are made for preparation and handling of powdered formulae for children younger than 2 months of age. In the home setting, powdered infant formulae should be freshly prepared for each feed. Any milk remaining should be discarded rather than used in the following feed. Infant feeds should never be kept warm in bottle heaters or thermoses. In hospitals and other institutions written guidelines for preparation and handling of infant formulae should be established and their implementation monitored. If formula needs to be prepared in advance, it should be prepared on a daily basis and kept at 4 degrees C or below. Manufacturers of infant formulae should make every effort to minimize bacterial contamination of powdered products.

Robotic-assisted surgery in gynecologic oncology.

PubMed

Sinno, Abdulrahman K; Fader, Amanda N

2014-10-01

The quest for improved patient outcomes has been a driving force for adoption of novel surgical innovations across surgical subspecialties. Gynecologic oncology is one such surgical discipline in which minimally invasive surgery has had a robust and evolving role in defining standards of care. Robotic-assisted surgery has developed during the past two decades as a more technologically advanced form of minimally invasive surgery in an effort to mitigate the limitations of conventional laparoscopy and improved patient outcomes. Robotically assisted technology offers potential advantages that include improved three-dimensional stereoscopic vision, wristed instruments that improve surgeon dexterity, and tremor canceling software that improves surgical precision. These technological advances may allow the gynecologic oncology surgeon to perform increasingly radical oncologic surgeries in complex patients. However, the platform is not without limitations, including high cost, lack of haptic feedback, and the requirement for additional training to achieve competence. This review describes the role of robotic-assisted surgery in the management of endometrial, cervical, and ovarian cancer, with an emphasis on comparison with laparotomy and conventional laparoscopy. The literature on novel robotic innovations, special patient populations, cost effectiveness, and fellowship training is also appraised critically in this regard. Copyright © 2014 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Attaining minimally disruptive medicine: context, challenges and a roadmap for implementation.

PubMed

Shippee, N D; Allen, S V; Leppin, A L; May, C R; Montori, V M

2015-01-01

In this second of two papers on minimally disruptive medicine, we use the language of patient workload and patient capacity from the Cumulative Complexity Model to accomplish three tasks. First, we outline the current context in healthcare, comprised of contrasting problems: some people lack access to care and others receive too much care in an overmedicalised system, both of which reflect imbalances between patients' workloads and their capacity. Second, we identify and address five tensions and challenges between minimally disruptive medicine, the existing context, and other approaches to accessible and patient-centred care such as evidence-based medicine and greater patient engagement. Third, we outline a roadmap of three strategies toward implementing minimally disruptive medicine in practice, including large-scale paradigm shifts, mid-level add-ons to existing reform efforts, and a modular strategy using an existing 'toolkit' that is more limited in scope, but can fit into existing healthcare systems.

Application of quadratic optimization to supersonic inlet control

NASA Technical Reports Server (NTRS)

Lehtinen, B.; Zeller, J. R.

1971-01-01

The application of linear stochastic optimal control theory to the design of the control system for the air intake (inlet) of a supersonic air-breathing propulsion system is discussed. The controls must maintain a stable inlet shock position in the presence of random airflow disturbances and prevent inlet unstart. Two different linear time invariant control systems are developed. One is designed to minimize a nonquadratic index, the expected frequency of inlet unstart, and the other is designed to minimize the mean square value of inlet shock motion. The quadratic equivalence principle is used to obtain the best linear controller that minimizes the nonquadratic performance index. The two systems are compared on the basis of unstart prevention, control effort requirements, and sensitivity to parameter variations.

Sonic Boom Minimization Efforts on Boeing HSCT Baseline

NASA Technical Reports Server (NTRS)

Cheung, Samson H.; Fouladi, Kamran; Haglund, George; Tu, Eugene

1999-01-01

A team was formed to tackle the sonic boom softening issues of the current Boeing HSCT design. The team consisted of personnel from NASA Ames, NASA Langley, and Boeing company. The work described in this paper was done when the first author was at NASA Ames Research Center. This paper presents the sonic boom softening work on two Boeing High Speed Civil Transport (HSCT) baseline configurations, Reference-H and Boeing-1122. This presentation can be divided into two parts: parametric studies and sonic boom minimization by CFD optimization routines.

Aviation accident forensic assessment : comprehensive single-extraction urine screening procedure : final report.

DOT National Transportation Integrated Search

1996-05-01

This paper describes a new single extraction screening procedure that was developed to identify as many drugs as possible in urine, with minimal effort and cost. Urine specimens are hydrolyzed and the specimen is then extracted using commercially pur...

Comparison of "saw and seal" procedure and performance grade binder to minimize thermal cracking.

DOT National Transportation Integrated Search

2001-04-01

In an effort to compare performance and cost effectiveness of the Saw and : Seal procedure and Performance Grade (PG) binders, the Maine Department Of : Transportation (MDOT) constructed an experimental project in Weston, Maine : during the fal...

Help Wanted: More Cosmopolitan Managers.

ERIC Educational Resources Information Center

Hayden, Rose L.

The government role in internationalizing business education in the United States is minimal for several reasons: the limited federal role in public education curriculum, limited government-industry collaboration at state and local levels, little effort to standardize the international dimension of college business administration programs, and…

Mild Traumatic Brain Injury: Facilitating School Success.

ERIC Educational Resources Information Center

Hux, Karen; Hacksley, Carolyn

1996-01-01

A case study is used to demonstrate the effects of mild traumatic brain injury on educational efforts. Discussion covers factors complicating school reintegration, ways to facilitate school reintegration, identification of cognitive and behavioral consequences, minimization of educators' discomfort, reintegration program design, and family…

Sensitivity and accuracy of high-throughput metabarcoding methods for early detection of invasive fish species

EPA Science Inventory

For early detection biomonitoring of aquatic invasive species, sensitivity to rare individuals and accurate, high-resolution taxonomic classification are critical to minimize detection errors. Given the great expense and effort associated with morphological identification of many...

76 FR 32992 - Proposed Collection; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-07

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Proposed Collection; Comment Request ACTION: Notice. SUMMARY: The National Endowment for the Arts (NEA), as part of its continuing effort to reduce... and financial resources) is minimized, collection instruments are clearly understood, and the impact...

Who Is Your Coach?

ERIC Educational Resources Information Center

Bowman, Richard F.

2017-01-01

Initial teacher licensing is intended to provide public assurance of core competence in classroom settings. Core competence's implicit vulnerability is mediocrity. In daily practice, many educators appear satisfied in reaching a merely acceptable level of performance, thus minimizing the period of effortful skill acquisition required to attain…

Panama Canal Fog Navigation Study : System Requirements Statement

DOT National Transportation Integrated Search

1984-03-01

Efforts to minimize the adverse impact of fog on Panama Canal operations have focused in the past on obtaining methods of predicting fog, of dispersing fog and of providing navigation during fog. This report describes the result of the most recent fo...

Minimizing the risks created by an emissions inventory

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oppenfeld, R.R. von; Evans, D.M.; Vamos, J.C.

Emissions inventories are required under the federal Clean Air Act ({open_quotes}Act{close_quotes}). Sources must identify emissions points and the types of air pollutants emitted, and quantify by measurement, modeling, or estimation the amount of each pollutant. The emissions inventory is an information gathering tool, providing regulatory agencies and the public with an overview of pollutants that may be emitted. Emission inventories are not reports of precise measurements of emissions and may be misunderstood, misinterpreted or misused. The emissions inventory and the underlying documentation are potential evidence in enforcement actions under the Act and other federal and state environmental laws. Readily availablemore » to the public, emission inventories may also be used in citizen suits, toxic tort actions and other types of civil actions for damages. Practical as well as legal mechanisms allow regulated entities to minimize the possibility that an emissions inventory or its underlying documentation will be a {open_quotes}smoking gun.{close_quotes} Practical tools include use of qualifying or disclaimer language in the final inventory. The inventory effort can be planned and executed to minimize the risk of misuse and to bring the effort within privileges, such as the self-evaluative privilege, statutory audit privileges, the attorney-client privilege or the attorney work product privilege.« less

Comprehensive HIV Prevention for Transgender Persons.

PubMed

Neumann, Mary Spink; Finlayson, Teresa J; Pitts, Nicole L; Keatley, JoAnne

2017-02-01

Transgender persons are at high risk for HIV infection, but prevention efforts specifically targeting these people have been minimal. Part of the challenge of HIV prevention for transgender populations is that numerous individual, interpersonal, social, and structural factors contribute to their risk. By combining HIV prevention services with complementary medical, legal, and psychosocial services, transgender persons' HIV risk behaviors, risk determinants, and overall health can be affected simultaneously. For maximum health impact, comprehensive HIV prevention for transgender persons warrants efforts targeted to various impact levels-socioeconomic factors, decision-making contexts, long-lasting protections, clinical interventions, and counseling and education. We present current HIV prevention efforts that reach transgender persons and present others for future consideration.

Comprehensive HIV Prevention for Transgender Persons

PubMed Central

Neumann, Mary Spink; Finlayson, Teresa J.; Pitts, Nicole L.; Keatley, JoAnne

2017-01-01

Transgender persons are at high risk for HIV infection, but prevention efforts specifically targeting these people have been minimal. Part of the challenge of HIV prevention for transgender populations is that numerous individual, interpersonal, social, and structural factors contribute to their risk. By combining HIV prevention services with complementary medical, legal, and psychosocial services, transgender persons’ HIV risk behaviors, risk determinants, and overall health can be affected simultaneously. For maximum health impact, comprehensive HIV prevention for transgender persons warrants efforts targeted to various impact levels—socioeconomic factors, decision-making contexts, long-lasting protections, clinical interventions, and counseling and education. We present current HIV prevention efforts that reach transgender persons and present others for future consideration. PMID:27997228

Extending Our Understanding of Compliant Thermal Barrier Performance

NASA Technical Reports Server (NTRS)

Demange, Jeffrey J.; Finkbeiner, Joshua R.; Dunlap, Patrick H.

2014-01-01

Thermal barriers and seals are integral components in the thermal protection systems (TPS) of nearly all aerospace vehicles. They are used to minimize the flow of hot gases through interfaces and protect underlying temperature-sensitive components and systems. Although thermal barriers have been used extensively on many aerospace vehicles, the factors affecting their thermal and mechanical performance are not well-understood. Because of this, vehicle TPS designers are often left with little guidance on how to properly design and optimize these barriers. An ongoing effort to better understand thermal barrier performance and develop models and design tools is in progress at the NASA Glenn Research Center. Testing has been conducted to understand the degree to which insulation density influences structural performance and permeability. In addition, the development of both thermal and mechanical models is ongoing with the goal of providing an improved ability to design and implement these critical TPS components.

Impact of scaffold rigidity on the design and evolution of an artificial Diels-Alderase

PubMed Central

Preiswerk, Nathalie; Beck, Tobias; Schulz, Jessica D.; Milovník, Peter; Mayer, Clemens; Siegel, Justin B.; Baker, David; Hilvert, Donald

2014-01-01

By combining targeted mutagenesis, computational refinement, and directed evolution, a modestly active, computationally designed Diels-Alderase was converted into the most proficient biocatalyst for [4+2] cycloadditions known. The high stereoselectivity and minimal product inhibition of the evolved enzyme enabled preparative scale synthesis of a single product diastereomer. X-ray crystallography of the enzyme–product complex shows that the molecular changes introduced over the course of optimization, including addition of a lid structure, gradually reshaped the pocket for more effective substrate preorganization and transition state stabilization. The good overall agreement between the experimental structure and the original design model with respect to the orientations of both the bound product and the catalytic side chains contrasts with other computationally designed enzymes. Because design accuracy appears to correlate with scaffold rigidity, improved control over backbone conformation will likely be the key to future efforts to design more efficient enzymes for diverse chemical reactions. PMID:24847076

Near-optimal protocols in complex nonequilibrium transformations

DOE PAGES

Gingrich, Todd R.; Rotskoff, Grant M.; Crooks, Gavin E.; ...

2016-08-29

The development of sophisticated experimental means to control nanoscale systems has motivated efforts to design driving protocols that minimize the energy dissipated to the environment. Computational models are a crucial tool in this practical challenge. In this paper, we describe a general method for sampling an ensemble of finite-time, nonequilibrium protocols biased toward a low average dissipation. In addition, we show that this scheme can be carried out very efficiently in several limiting cases. As an application, we sample the ensemble of low-dissipation protocols that invert the magnetization of a 2D Ising model and explore how the diversity of themore » protocols varies in response to constraints on the average dissipation. In this example, we find that there is a large set of protocols with average dissipation close to the optimal value, which we argue is a general phenomenon.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tabatowski, K.; Roggli, V.L.; Fulkerson, W.J.

A case of biopsy-proven giant cell interstitial pneumonia in a patient with occupational exposure to hard-metal dust is reported. Bronchial washings performed several days prior to open-lung biopsy yielded an almost exclusive population of nonpigmented alveolar macrophages and pleomorphic, phagocytic multinucleated giant cells. Microorganisms, viral inclusions in the giant cells, epithelioid histiocytes and well-formed granulomas were not seen. This cytologic picture strongly suggests the presence of giant cell interstitial pneumonia in a patient with restrictive lung disease, particularly when exposure to hard-metal dust is known or suspected. A specific diagnosis early in the course of the disease may facilitate removalmore » of the individual from the workplace and forestall the development of end-stage interstitial fibrosis. Additionally, the working environment may be modified to minimize inhalational exposure. Recognition of this entity by the cytopathologist may direct diagnostic efforts toward accurate histologic evaluation and the identification of particulates by microprobe analysis of either cellular or biopsy material.« less

Workplace exposures and protective practices of Hispanic warehouse workers.

PubMed

Livaudais, Jennifer C; Thompson, Beti; Islas, Ilda; Ibarra, Genoveva; Anderson, Jennifer; Coronado, Gloria D

2009-04-01

This study was undertaken to assess workplace hazards and protective practices among Hispanic men and women working post-harvest in asparagus, apple and pear packaging warehouses. Three focus groups were conducted in July 2003 with 25 workers (20 women, 5 men) recruited from communities in the Yakima Valley, Washington. Focus group content informed the design of an in-person structured interview administered to 50 additional warehouse workers from August to November 2006. Focus group participants reported difficult working conditions, exposure to chemicals, adverse health effects and use of work and home protective practices to minimize exposures for themselves and their families. Structured interview participants reported few workplace exposures to chemicals although many reported engaging in workplace and home protective practices. Findings from this research can direct initial efforts to determine if and how interventions for warehouse workers may be designed to protect against hazardous workplace exposures.

Medicare+Choice: what lies ahead?

PubMed

Layne, R Jeffrey

2002-03-01

Health plans have continued to exit the Medicare+Choice program in recent years, despite efforts of Congress and the Centers for Medicare and Medicaid Services (CMS) to reform the program. Congress and CMS therefore stand poised to make additional, substantial reforms to the program. CMS has proposed to consolidate its oversight of the program, extend the due date for Medicare+Choice plans to file their adjusted community rate proposals, revise risk-adjustment processes, streamline the marketing review process, enhance quality-improvement requirements, institute results based performance assessment audits, coordinate policy changes to coincide with contracting cycles, expand its fall advertising campaign for the program, provide better employer-based Medicare options for beneficiaries, and take steps to minimize beneficiary costs. Congressional leaders have proposed various legislative remedies to improve the program, including creation of an entirely new pricing structure for the program based on a competitive bidding process.

Extracellular space preservation aids the connectomic analysis of neural circuits.

PubMed

Pallotto, Marta; Watkins, Paul V; Fubara, Boma; Singer, Joshua H; Briggman, Kevin L

2015-12-09

Dense connectomic mapping of neuronal circuits is limited by the time and effort required to analyze 3D electron microscopy (EM) datasets. Algorithms designed to automate image segmentation suffer from substantial error rates and require significant manual error correction. Any improvement in segmentation error rates would therefore directly reduce the time required to analyze 3D EM data. We explored preserving extracellular space (ECS) during chemical tissue fixation to improve the ability to segment neurites and to identify synaptic contacts. ECS preserved tissue is easier to segment using machine learning algorithms, leading to significantly reduced error rates. In addition, we observed that electrical synapses are readily identified in ECS preserved tissue. Finally, we determined that antibodies penetrate deep into ECS preserved tissue with only minimal permeabilization, thereby enabling correlated light microscopy (LM) and EM studies. We conclude that preservation of ECS benefits multiple aspects of the connectomic analysis of neural circuits.

Evaluation of the effects of laparotomy and laparoscopy on the immune system in intra-abdominal sepsis--a review.

PubMed

Karantonis, Fotios-Filippos; Nikiteas, Nikolaos; Perrea, Despina; Vlachou, Antonia; Giamarellos-Bourboulis, Evangelos J; Tsigris, Christos; Kostakis, Alkiviadis

2008-01-01

This review portrays the most common experimental models of intra-abdominal sepsis. Additionally, it outlines the facts that distinguish laparotomy from laparoscopy, in respect to the immune response, when comparing these two techniques in experimental models of intra-abdominal sepsis. It describes the consequences of pneumoperitoneum and trauma produced by laparoscopy or laparotomy, respectively, on bacterial translocation and immunity. Furthermore, we report the few efforts that have been made in clinical settings, where surgeons have attempted to utilize laparoscopy as a therapeutic module when treating peritonitis or sepsis of abdominal origin. Certainly there is a need for more research in order to fortify the role of pneumoperitoneum in sepsis of abdominal origin. It seems that minimally invasive surgery will inevitably gain acceptance by surgeons, as evidence points that by inflicting less trauma the healing response is expected to be more efficient, especially in septic patients.

[Social support and living conditions in poor elderly people in urban Mexico].

PubMed

Pelcastre-Villafuerte, Blanca Estela; Treviño-Siller, Sandra; González-Vázquez, Tonatiuh; Márquez-Serrano, Margarita

2011-03-01

The aim of this paper was to analyze social support and living conditions among poor elderly people in Mexican cities. A qualitative study with eight focus groups was carried out in Guadalajara, Cuernavaca, Chilpancingo, and Culiacan, Mexico, in 2005. Forty men and 63 women participated in the study. The main support for the elderly in daily living came from their immediate family and in some cases from neighbors. Social support was basically material and economic, in addition to providing company and transportation for medical appointments. Daily emotional support, companionship, and social inclusion were minimal or absent. The study identified a significant lack of support from government and religious or civil society organizations. The family is still the main source of support for the elderly. Increased government collaboration is dramatically needed to combat the misconception that the needs of the elderly are the individual family's responsibility rather than a collaborative effort by society.

Achieving recognition that mental health is part of the mission of CDC.

PubMed

Safran, Marc A

2009-11-01

For much of its history the U.S. Centers for Disease Control and Prevention (CDC) considered mental health to be outside of its mission. That assumption persisted even after CDC became a leading public health agency and began to face important mental health issues. This narrative describes how the organizational paradigm indicating that mental health was not mission related was challenged and superseded by a new paradigm recognizing mental health as part of CDC's public health mission. Even after the CDC Mental Health Work Group's establishment in 2000, CDC took eight more years to overcome powerful remnants of the old paradigm that had for so long excluded, minimized, or discouraged attention to mental health. The CDC Mental Health Work Group led the agency's mental health efforts without funding or dedicated staffing but with more than 100 CDC professionals from multiple disciplines and centers serving as voluntary members, in addition to their other CDC responsibilities.

Assessment and modulation of neuroplasticity in rehabilitation with transcranial magnetic stimulation

PubMed Central

Bashir, Shahid; Mizrahi, Ilan; Weaver, Kayleen; Fregni, Felipe; Pascual-Leone, Alvaro

2013-01-01

Despite intensive efforts towards the improvement of outcomes after acquired brain injury functional recovery is often limited. One reasons is the challenge in assessing and guiding plasticity after brain injury. In this context, Transcranial Magnetic Stimulation (TMS) - a noninvasive tool of brain stimulation - could play a major role. TMS has shown to be a reliable tool to measure plastic changes in the motor cortex associated with interventions in the motor system; such as motor training and motor cortex stimulation. In addition, as illustrated by the experience in promoting recovery from stroke, TMS a promising therapeutic tool to minimize motor, speech, cognitive, and mood deficits. In this review, we will focus on stroke to discuss how TMS can provide insights into the mechanisms of neurological recovery, and can be used for measurement and modulation of plasticity after an acquired brain insult. PMID:21172687

The Weight of a Guilty Conscience: Subjective Body Weight as an Embodiment of Guilt

PubMed Central

Day, Martin V.; Bobocel, D. Ramona

2013-01-01

Guilt is an important social and moral emotion. In addition to feeling unpleasant, guilt is metaphorically described as a “weight on one's conscience.” Evidence from the field of embodied cognition suggests that abstract metaphors may be grounded in bodily experiences, but no prior research has examined the embodiment of guilt. Across four studies we examine whether i) unethical acts increase subjective experiences of weight, ii) feelings of guilt explain this effect, and iii) whether there are consequences of the weight of guilt. Studies 1–3 demonstrated that unethical acts led to more subjective body weight compared to control conditions. Studies 2 and 3 indicated that heightened feelings of guilt mediated the effect, whereas other negative emotions did not. Study 4 demonstrated a perceptual consequence. Specifically, an induction of guilt affected the perceived effort necessary to complete tasks that were physical in nature, compared to minimally physical tasks. PMID:23936041

The weight of a guilty conscience: subjective body weight as an embodiment of guilt.

PubMed

Day, Martin V; Bobocel, D Ramona

2013-01-01

Guilt is an important social and moral emotion. In addition to feeling unpleasant, guilt is metaphorically described as a "weight on one's conscience." Evidence from the field of embodied cognition suggests that abstract metaphors may be grounded in bodily experiences, but no prior research has examined the embodiment of guilt. Across four studies we examine whether i) unethical acts increase subjective experiences of weight, ii) feelings of guilt explain this effect, and iii) whether there are consequences of the weight of guilt. Studies 1-3 demonstrated that unethical acts led to more subjective body weight compared to control conditions. Studies 2 and 3 indicated that heightened feelings of guilt mediated the effect, whereas other negative emotions did not. Study 4 demonstrated a perceptual consequence. Specifically, an induction of guilt affected the perceived effort necessary to complete tasks that were physical in nature, compared to minimally physical tasks.

Environmental Control and Life Support (ECLS) Integrated Roadmap Development

NASA Technical Reports Server (NTRS)

Metcalf, Jordan L.; Carrasquillo, Robyn; Bagdigian, Bob; Peterson, Laurie

2011-01-01

This white paper documents a roadmap for development of Environmental Control and Life Support (ECLS) Systems (ECLSS) capabilities required to enable beyond-Low Earth Orbit (LEO) Exploration missions. In many cases, the execution of this Exploration-based roadmap will directly benefit International Space Station (ISS) operational capability by resolving known issues and/or improving overall system reliability. In addition, many of the resulting products will be applicable across multiple Exploration elements such as Multi-Purpose Crew Vehicle (MPCV), Multi-Mission Space Exploration Vehicle (MMSEV), Deep Space Habitat (DSH), and Landers. Within the ECLS community, this white paper will be a unifying tool that will improve coordination of resources, common hardware, and technologies. It will help to align efforts to focus on the highest priority needs that will produce life support systems for future human exploration missions that will simply run in the background, requiring minimal crew interaction.

Financial analysis of biogas utilization : input cattle, pig feces and coffee waste in Karo, Indonesia

NASA Astrophysics Data System (ADS)

Ginting, N.; Zuhri, F.; Hasnudi; Mirwandhono, E.; Sembiring, I.; Daulay, A. H.

2018-02-01

The community's need for renewable energy was very urgent. In addition, efforts to preserve the environment from waste caused biogas technology feasible to apply. This study aims to provide biogas technology with minimal cost and utilize agricultural waste that were coffee and livestock waste. The study was conducted from July to October 2016. The theoretical and empirical methods used in this study were included data from officials resources, field survey on 16 biogas locations, focus group discussion and interview with stake holders. Data were tabulated by Excel Program which then were analysed by SAS. Parameters were included Production Cost, Production Result, Profit Loss Analysis, Revenue Cost Ratio (R/C Ratio), Return On Investment (ROI), Net B/C, and IRR. The result of this research showed that the application of bioplastic gas with cow dung and coffee waste as bioplasticgas input cause the best results.

Lightweight Ablative and Ceramic Thermal Protection System Materials for NASA Exploration Systems Vehicles

NASA Technical Reports Server (NTRS)

Valentine, Peter G.; Lawrence, Timothy W.; Gubert, Michael K.; Milos, Frank S.; Kiser, James D.; Ohlhorst, Craig W.; Koenig, John R.

2006-01-01

As a collaborative effort among NASA Centers, the "Lightweight Nonmetallic Thermal Protection Materials Technology" Project was set up to assist mission/vehicle design trade studies, to support risk reduction in thermal protection system (TPS) material selections, to facilitate vehicle mass optimization, and to aid development of human-rated TPS qualification and certification plans. Missions performing aerocapture, aerobraking, or direct aeroentry rely on advanced heatshields that allow reductions in spacecraft mass by minimizing propellant requirements. Information will be presented on candidate materials for such reentry approaches and on screening tests conducted (material property and space environmental effects tests) to evaluate viable candidates. Seventeen materials, in three classes (ablatives, tiles, and ceramic matrix composites), were studied. In additional to physical, mechanical, and thermal property tests, high heat flux laser tests and simulated-reentry oxidation tests were performed. Space environmental effects testing, which included exposures to electrons, atomic oxygen, and hypervelocity impacts, was also conducted.

Contemporary management of stage I and II seminoma.

PubMed

Chung, Peter; Warde, Padraig

2013-10-01

Seminoma represents about 60 % of all testicular germ cell tumors. At presentation about 80 % of patients have stage I and about 15 % have stage II disease. The last three decades have seen a substantial change in the philosophy of management with the success of surveillance as a strategy to minimize unnecessary treatment, recognition of the late effects of radiation therapy, and the success of cisplatin-based chemotherapy as curative treatment either in the first-line or salvage setting. Overall, in stage I disease where 80-85 % are cured with orchiectomy alone, efforts now are directed at reducing the burden of the disease and its diagnosis on patients with increasing utilization of surveillance and decreased employment of adjuvant therapy. For stage II disease, balancing the relative toxicities of radiation and chemotherapy while avoiding the use of multimodality therapy due to the additive long-term toxicity has become the priority.

End-to-End Assessment of a Large Aperture Segmented Ultraviolet Optical Infrared (UVOIR) Telescope Architecture

NASA Technical Reports Server (NTRS)

Feinberg, Lee; Rioux, Norman; Bolcar, Matthew; Liu, Alice; Guyon, Oliver; Stark, Chris; Arenberg, Jon

2016-01-01

Key challenges of a future large aperture, segmented Ultraviolet Optical Infrared (UVOIR) Telescope capable of performing a spectroscopic survey of hundreds of Exoplanets will be sufficient stability to achieve 10^-10 contrast measurements and sufficient throughput and sensitivity for high yield Exo-Earth spectroscopic detection. Our team has collectively assessed an optimized end to end architecture including a high throughput coronagraph capable of working with a segmented telescope, a cost-effective and heritage based stable segmented telescope, a control architecture that minimizes the amount of new technologies, and an Exo-Earth yield assessment to evaluate potential performance. These efforts are combined through integrated modeling, coronagraph evaluations, and Exo-Earth yield calculations to assess the potential performance of the selected architecture. In addition, we discusses the scalability of this architecture to larger apertures and the technological tall poles to enabling it.

‘Uncrunching’ time: medical schools’ use of social media for faculty development

PubMed Central

Cahn, Peter S.; Benjamin, Emelia J.; Shanahan, Christopher W.

2013-01-01

Purpose The difficulty of attracting attendance for in-person events is a problem common to all faculty development efforts. Social media holds the potential to disseminate information asynchronously while building a community through quick, easy-to-use formats. The authors sought to document creative uses of social media for faculty development in academic medical centers. Method In December 2011, the first author (P.S.C.) examined the websites of all 154 accredited medical schools in the United States and Canada for pages relevant to faculty development. The most popular social media sites and searched for accounts maintained by faculty developers in academic medicine were also visited. Several months later, in February 2012, a second investigator (C.W.S.) validated these data via an independent review. Results Twenty-two (22) medical schools (14.3%) employed at least one social media technology in support of faculty development. In total, 40 instances of social media tools were identified – the most popular platforms being Facebook (nine institutions), Twitter (eight institutions), and blogs (eight institutions). Four medical schools, in particular, have developed integrated strategies to engage faculty in online communities. Conclusions Although relatively few medical schools have embraced social media to promote faculty development, the present range of such uses demonstrates the flexibility and affordability of the tools. The most popular tools incorporate well into faculty members’ existing use of technology and require minimal additional effort. Additional research into the benefits of engaging faculty through social media may help overcome hesitation to invest in new technologies. PMID:23810170

Chemical plants remain vulnerable to terrorists: a call to action.

PubMed

Lippin, Tobi Mae; McQuiston, Thomas H; Bradley-Bull, Kristin; Burns-Johnson, Toshiba; Cook, Linda; Gill, Michael L; Howard, Donna; Seymour, Thomas A; Stephens, Doug; Williams, Brian K

2006-09-01

U.S. chemical plants currently have potentially catastrophic vulnerabilities as terrorist targets. The possible consequences of these vulnerabilities echo from the tragedies of the Bhopal incident in 1984 to the terrorist attacks on 11 September 2001 and, most recently, Hurricanes Katrina and Rita. Findings from a 2004 nationwide participatory research study of 125 local union leaders at sites with very large volumes of highly hazardous chemicals suggest that voluntary efforts to achieve chemical plant security are not succeeding. Study respondents reported that companies had only infrequently taken actions that are most effective in preventing or in preparing to respond to a terrorist threat. In addition, companies reportedly often failed to involve key stakeholders, including workers, local unions, and the surrounding communities, in these efforts. The environmental health community thus has an opportunity to play a key role in advocating for and supporting improvements in prevention of and preparation for terrorist attacks. Policy-level recommendations to redress chemical site vulnerabilities and the related ongoing threats to the nation's security are as follows: a) specify detailed requirements for chemical site assessment and security ; b) mandate audit inspections supported by significant penalties for cases of noncompliance ; c) require progress toward achieving inherently safer processes, including the minimizing of storage of highly hazardous chemicals ; d) examine and require additional effective actions in prevention, emergency preparedness, and response and remediation ; e) mandate and fund the upgrading of emergency communication systems ; and f) involve workers and community members in plan creation and equip and prepare them to prevent and respond effectively to an incident.

Chemical Plants Remain Vulnerable to Terrorists: A Call to Action

PubMed Central

Lippin, Tobi Mae; McQuiston, Thomas H.; Bradley-Bull, Kristin; Burns-Johnson, Toshiba; Cook, Linda; Gill, Michael L.; Howard, Donna; Seymour, Thomas A.; Stephens, Doug; Williams, Brian K.

2006-01-01

U.S. chemical plants currently have potentially catastrophic vulnerabilities as terrorist targets. The possible consequences of these vulnerabilities echo from the tragedies of the Bhopal incident in 1984 to the terrorist attacks on 11 September 2001 and, most recently, Hurricanes Katrina and Rita. Findings from a 2004 nationwide participatory research study of 125 local union leaders at sites with very large volumes of highly hazardous chemicals suggest that voluntary efforts to achieve chemical plant security are not succeeding. Study respondents reported that companies had only infrequently taken actions that are most effective in preventing or in preparing to respond to a terrorist threat. In addition, companies reportedly often failed to involve key stakeholders, including workers, local unions, and the surrounding communities, in these efforts. The environmental health community thus has an opportunity to play a key role in advocating for and supporting improvements in prevention of and preparation for terrorist attacks. Policy-level recommendations to redress chemical site vulnerabilities and the related ongoing threats to the nation’s security are as follows: a) specify detailed requirements for chemical site assessment and security; b) mandate audit inspections supported by significant penalties for cases of noncompliance; c) require progress toward achieving inherently safer processes, including the minimizing of storage of highly hazardous chemicals; d) examine and require additional effective actions in prevention, emergency preparedness, and response and remediation; e) mandate and fund the upgrading of emergency communication systems; and f) involve workers and community members in plan creation and equip and prepare them to prevent and respond effectively to an incident. PMID:16966080

LAMP detection assays for boxwood blight pathogens: a comparative genomics approach

USDA-ARS?s Scientific Manuscript database

Rapid and accurate molecular diagnostic tools are critical to efforts to minimize the impact and spread of emergent pathogens. The identification of diagnostic markers for novel pathogens presents several challenges, especially in the absence of information about population diversity, and where gen...

Intermediate temperature cracking in HMA : phase 1 semi-circular bending (SCB) practicality evaluation.

DOT National Transportation Integrated Search

2017-02-01

The Utah Department of Transportation has implemented a program to test the rutting and moisture : sensitivity of Dense Grade Asphalt. Under this program, asphalt mixes have become much harder and dryer in an : effort to minimize rutting potential. T...

Alcohol and Drug Education in Schools of Nursing.

ERIC Educational Resources Information Center

Howard, Matthew Owen; Walker, R. Dale; Walker, Patricia Silk; Suchinsky, Richard T.

1997-01-01

Identifies and critiques studies regarding chemical dependency training within schools of nursing. The few research efforts in this area possessed methodological shortcomings, and schools of nursing generally provided minimal exposure to important concepts in addictions research. Neither the scope nor intensity of clinical instruction was…

Voice data entry in air traffic control

NASA Technical Reports Server (NTRS)

Connolly, Donald W.

1977-01-01

Several of the keyboard data languages were tabulated and analyzed. The key language chosen as a test vehicle was that used by the nonradar or flight data controllers. This application was undertaken to minimize effort in a cost efficient way and with less research and development.

Comparison of "saw and seal" procedure and performance grade binder to minimize thermal cracking : first interim report.

DOT National Transportation Integrated Search

2002-06-01

In an effort to compare performance and cost effectiveness of the Saw and Seal procedure and : Performance Grade (PG) binders, the Maine Department of Transportation (MDOT) constructed an : experimental project in Weston, Maine during the fall ...

29 CFR 1691.12 - Interagency consultation.

Code of Federal Regulations, 2014 CFR

2014-07-01

... Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION PROCEDURES FOR COMPLAINTS OF... the EEOC and the Assistant Attorney General to assure that duplication of effort will be minimized. (b... unlawful employment practices, the Department of Justice and/or EEOC shall, to the extent practical, notify...

29 CFR 1691.12 - Interagency consultation.

Code of Federal Regulations, 2012 CFR

2012-07-01

... Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION PROCEDURES FOR COMPLAINTS OF... the EEOC and the Assistant Attorney General to assure that duplication of effort will be minimized. (b... unlawful employment practices, the Department of Justice and/or EEOC shall, to the extent practical, notify...

29 CFR 1691.12 - Interagency consultation.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION PROCEDURES FOR COMPLAINTS OF... the EEOC and the Assistant Attorney General to assure that duplication of effort will be minimized. (b... unlawful employment practices, the Department of Justice and/or EEOC shall, to the extent practical, notify...

29 CFR 1691.12 - Interagency consultation.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION PROCEDURES FOR COMPLAINTS OF... the EEOC and the Assistant Attorney General to assure that duplication of effort will be minimized. (b... unlawful employment practices, the Department of Justice and/or EEOC shall, to the extent practical, notify...

29 CFR 1691.12 - Interagency consultation.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Regulations Relating to Labor (Continued) EQUAL EMPLOYMENT OPPORTUNITY COMMISSION PROCEDURES FOR COMPLAINTS OF... the EEOC and the Assistant Attorney General to assure that duplication of effort will be minimized. (b... unlawful employment practices, the Department of Justice and/or EEOC shall, to the extent practical, notify...

Semantic-gap-oriented active learning for multilabel image annotation.

PubMed

Tang, Jinhui; Zha, Zheng-Jun; Tao, Dacheng; Chua, Tat-Seng

2012-04-01

User interaction is an effective way to handle the semantic gap problem in image annotation. To minimize user effort in the interactions, many active learning methods were proposed. These methods treat the semantic concepts individually or correlatively. However, they still neglect the key motivation of user feedback: to tackle the semantic gap. The size of the semantic gap of each concept is an important factor that affects the performance of user feedback. User should pay more efforts to the concepts with large semantic gaps, and vice versa. In this paper, we propose a semantic-gap-oriented active learning method, which incorporates the semantic gap measure into the information-minimization-based sample selection strategy. The basic learning model used in the active learning framework is an extended multilabel version of the sparse-graph-based semisupervised learning method that incorporates the semantic correlation. Extensive experiments conducted on two benchmark image data sets demonstrated the importance of bringing the semantic gap measure into the active learning process.

The soft constraints hypothesis: a rational analysis approach to resource allocation for interactive behavior.

PubMed

Gray, Wayne D; Sims, Chris R; Fu, Wai-Tat; Schoelles, Michael J

2006-07-01

Soft constraints hypothesis (SCH) is a rational analysis approach that holds that the mixture of perceptual-motor and cognitive resources allocated for interactive behavior is adjusted based on temporal cost-benefit tradeoffs. Alternative approaches maintain that cognitive resources are in some sense protected or conserved in that greater amounts of perceptual-motor effort will be expended to conserve lesser amounts of cognitive effort. One alternative, the minimum memory hypothesis (MMH), holds that people favor strategies that minimize the use of memory. SCH is compared with MMH across 3 experiments and with predictions of an Ideal Performer Model that uses ACT-R's memory system in a reinforcement learning approach that maximizes expected utility by minimizing time. Model and data support the SCH view of resource allocation; at the under 1000-ms level of analysis, mixtures of cognitive and perceptual-motor resources are adjusted based on their cost-benefit tradeoffs for interactive behavior. ((c) 2006 APA, all rights reserved).

How Do Price Minimizing Behaviors Impact Smoking Cessation? Findings from the International Tobacco Control (ITC) Four Country Survey

PubMed Central

Licht, Andrea S.; Hyland, Andrew J.; O’Connor, Richard J.; Chaloupka, Frank J.; Borland, Ron; Fong, Geoffrey T.; Nargis, Nigar; Cummings, K. Michael

2011-01-01

This paper examines how price minimizing behaviors impact efforts to stop smoking. Data on 4,988 participants from the International Tobacco Control Policy Evaluation (ITC) Four-Country Survey who were smokers at baseline (wave 5) and interviewed at a 1 year follow-up were used. We examined whether price minimizing behaviors at baseline predicted: (1) cessation, (2) quit attempts, and (3) successful quit attempts at one year follow up using multivariate logistic regression modeling. A subset analysis included 3,387 participants who were current smokers at waves 5 and 6 and were followed through wave 7 to explore effects of changing purchase patterns on cessation. Statistical tests for interaction were performed to examine the joint effect of SES and price/tax avoidance behaviors on cessation outcomes. Smokers who engaged in any price/tax avoidance behaviors were 28% less likely to report cessation. Persons using low/untaxed sources were less likely to quit at follow up, those purchasing cartons were less likely to make quit attempts and quit, and those using discount cigarettes were less likely to succeed, conditional on making attempts. Respondents who utilized multiple behaviors simultaneously were less likely to make quit attempts and to succeed. SES did not modify the effects of price minimizing behaviors on cessation outcomes. The data from this paper indicate that the availability of lower priced cigarette alternatives may attenuate public health efforts aimed at to reduce reducing smoking prevalence through price and tax increases among all SES groups. PMID:21655144

An algorithm for designing minimal microbial communities with desired metabolic capacities

PubMed Central

Eng, Alexander; Borenstein, Elhanan

2016-01-01

Motivation: Recent efforts to manipulate various microbial communities, such as fecal microbiota transplant and bioreactor systems’ optimization, suggest a promising route for microbial community engineering with numerous medical, environmental and industrial applications. However, such applications are currently restricted in scale and often rely on mimicking or enhancing natural communities, calling for the development of tools for designing synthetic communities with specific, tailored, desired metabolic capacities. Results: Here, we present a first step toward this goal, introducing a novel algorithm for identifying minimal sets of microbial species that collectively provide the enzymatic capacity required to synthesize a set of desired target product metabolites from a predefined set of available substrates. Our method integrates a graph theoretic representation of network flow with the set cover problem in an integer linear programming (ILP) framework to simultaneously identify possible metabolic paths from substrates to products while minimizing the number of species required to catalyze these metabolic reactions. We apply our algorithm to successfully identify minimal communities both in a set of simple toy problems and in more complex, realistic settings, and to investigate metabolic capacities in the gut microbiome. Our framework adds to the growing toolset for supporting informed microbial community engineering and for ultimately realizing the full potential of such engineering efforts. Availability and implementation: The algorithm source code, compilation, usage instructions and examples are available under a non-commercial research use only license at https://github.com/borenstein-lab/CoMiDA. Contact: elbo@uw.edu Supplementary information: Supplementary data are available at Bioinformatics online. PMID:27153571

Parallelized modelling and solution scheme for hierarchically scaled simulations

NASA Technical Reports Server (NTRS)

Padovan, Joe

1995-01-01

This two-part paper presents the results of a benchmarked analytical-numerical investigation into the operational characteristics of a unified parallel processing strategy for implicit fluid mechanics formulations. This hierarchical poly tree (HPT) strategy is based on multilevel substructural decomposition. The Tree morphology is chosen to minimize memory, communications and computational effort. The methodology is general enough to apply to existing finite difference (FD), finite element (FEM), finite volume (FV) or spectral element (SE) based computer programs without an extensive rewrite of code. In addition to finding large reductions in memory, communications, and computational effort associated with a parallel computing environment, substantial reductions are generated in the sequential mode of application. Such improvements grow with increasing problem size. Along with a theoretical development of general 2-D and 3-D HPT, several techniques for expanding the problem size that the current generation of computers are capable of solving, are presented and discussed. Among these techniques are several interpolative reduction methods. It was found that by combining several of these techniques that a relatively small interpolative reduction resulted in substantial performance gains. Several other unique features/benefits are discussed in this paper. Along with Part 1's theoretical development, Part 2 presents a numerical approach to the HPT along with four prototype CFD applications. These demonstrate the potential of the HPT strategy.

The state of animal welfare in the context of refinement.

PubMed

Zurlo, Joanne; Hutchinson, Eric

2014-01-01

The ultimate goal of the Three Rs is the full replacement of animals used in biomedical research and testing. However, replacement is unlikely to occur in the near future; therefore the scientific community as a whole must continue to devote considerable effort to ensure optimal animal welfare for the benefit of the science and the animals, i.e., the R of refinement. Laws governing the care and use of laboratory animals have recently been revised in Europe and the US and these place greater emphasis on promoting the well-being of the animals in addition to minimizing pain and distress. Social housing for social species is now the default condition, which can present a challenge in certain experimental settings and for certain species. The practice of positive reinforcement training of laboratory animals, particularly non-human primates, is gathering momentum but is not yet universally employed. Enhanced consideration of refinement extends to rodents, particularly mice, whose use is still increasing as more genetically modified models are generated. The wastage of extraneous mice and the method of their euthanasia are refinement issues that still need to be addressed. An international, concerted effort into defining the needs of laboratory animals is still necessary to improve the quality of the animal models used as well as their welfare.

2004 Environmental Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Althouse, P E; Bertoldo, N A; Brown, R A

2005-09-28

The Lawrence Livermore National Laboratory (LLNL) annual Environmental Report, prepared for the Department of Energy (DOE) and made available to the public, presents summary environmental data that characterizes site environmental management performance, summarizes environmental occurrences and responses reported during the calendar year, confirms compliance with environmental standards and requirements, and highlights significant programs and efforts. By explaining the results of effluent and environmental monitoring, mentioning environmental performance indicators and performance measure programs, and assessing the impact of Laboratory operations on the environment and the public, the report also demonstrates LLNL's continuing commitment to minimize any potentially adverse impact of itsmore » operations. The combination of environmental and effluent monitoring, source characterization, and dose assessment showed that radiological doses to the public caused by LLNL operations in 2004 were less than 0.26% of regulatory standards and more than 11,000 times smaller than dose from natural background. Analytical results and evaluations generally showed continuing low levels of most contaminants; remediation efforts further reduced the concentrations of contaminants of concern in groundwater and soil vapor. In addition, LLNL's extensive environmental compliance activities related to water, air, endangered species, waste, wastewater, and waste reduction controlled or reduced LLNL's effects on the environment. LLNL's environmental program clearly demonstrates a commitment to protecting the environment from operational impacts.« less

Finding Minimal Addition Chains with a Particle Swarm Optimization Algorithm

NASA Astrophysics Data System (ADS)

León-Javier, Alejandro; Cruz-Cortés, Nareli; Moreno-Armendáriz, Marco A.; Orantes-Jiménez, Sandra

The addition chains with minimal length are the basic block to the optimal computation of finite field exponentiations. It has very important applications in the areas of error-correcting codes and cryptography. However, obtaining the shortest addition chains for a given exponent is a NP-hard problem. In this work we propose the adaptation of a Particle Swarm Optimization algorithm to deal with this problem. Our proposal is tested on several exponents whose addition chains are considered hard to find. We obtained very promising results.

Analysis of research ethics board approval times in an academic department of medicine.

PubMed

Tsang, Teresa S M; Jones, Meaghan; Meneilly, Graydon S

2015-04-01

As part of an ongoing effort to better understand barriers to academic research, we reviewed and analyzed the process of research ethics applications, focusing on ethics approval time, within the Department of Medicine from 2006 to 2011. A total of 1,268 applications for approval to use human subjects in research were included in our analysis. Three variables, risk category (minimal vs. non-minimal risk), type of funding, and year of submission, were statistically significant for prediction of ethics approval time, with risk status being the most important of these. The covariate-adjusted mean time for approval for minimal risk studies (35.7 days) was less than half that of non-minimal risk protocols (76.5 days). Studies funded through a for-profit sponsor had significantly longer approval times than those funded through other means but were also predominantly (87%) non-minimal risk protocols. Further investigations of the reasons underlying the observed differences are needed to determine whether improved training for research ethics board (REB) members and/or greater dialogue with investigators may reduce the lengthy approval times associated with non-minimal risk protocols. © The Author(s) 2015.

Recent Trends in Newly Developed Plasma-Sprayed and Sintered Coatings for Implant Applications

NASA Astrophysics Data System (ADS)

Bsat, Suzan; Speirs, Andrew; Huang, Xiao

2016-08-01

The current paper aims to review recent trends (2011 to 2015) in newly developed plasma-sprayed and sintered coatings for implant applications. Recent developments in plasma-sprayed and sintered coatings have focused on improving biological performance, bacterial growth resistance, and mechanical properties, predominantly of HA and glass ceramics. The majority of these improvements are attributed to the addition of dopants. To improve biological performance, trace elements, such as Zn and Mg, both of which are found in bone, were added to replicate the functions they provide for the skeletal system. Though bacterial growth resistance is traditionally improved by Ag dopant, the addition of new dopants such as CeO2 and Zn were explored as well. Great effort has also been made to improve coating adherence and reduce stresses by minimizing coefficient of thermal expansion mismatch between the coating and substrate through the addition of elements such as Zn and Mg or the inclusion of a buffer layer. For sintering process in particular, there was an emphasis on reducing sintering temperature through modification of 45S5 Bioglass. New plasma spray and sintering technologies aimed at reducing high-temperature exposure are briefly introduced as well. These include microplasma spray and spark plasma sintering.

Uranium Mill Tailings Remedial Action Project Safety Advancement Field Effort (SAFE) Program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-02-01

In 1992, the Uranium Mill Tailings Remedial Action (UMTRA) Project experienced several health and safety related incidents at active remediation project sites. As a result, the U.S. Department of Energy (DOE) directed the Technical Assistance Contractor (TAC) to establish a program increasing the DOE`s overall presence at operational remediation sites to identify and minimize risks in operations to the fullest extent possible (Attachments A and B). In response, the TAC, in cooperation with the DOE and the Remedial Action Contractor (RAC), developed the Safety Advancement Field Effort (SAFE) Program.

Radiation Hardness Assurance (RHA): Challenges and New Considerations

NASA Technical Reports Server (NTRS)

Campola, Michael J.

2017-01-01

Radiation Hardness Assurance (RHA) challenges associated with the use of commercial-off-the-shelf (COTS) components and emerging technologies are cause for risk acceptance in space flight missions. The RHA flow includes environment definition, hazard evaluation, requirements definition, evaluation of design, and design trades to accommodate the risk a project or program takes. The varied missions profiles and environments don't necessarily benefit from the same risk reduction efforts or cost reduction attempts. The level of effort within the RHA flow can be tailored to minimize risk based on the environment or design criticality.

Application of quadratic optimization to supersonic inlet control.

NASA Technical Reports Server (NTRS)

Lehtinen, B.; Zeller, J. R.

1972-01-01

This paper describes the application of linear stochastic optimal control theory to the design of the control system for the air intake, the inlet, of a supersonic air-breathing propulsion system. The controls must maintain a stable inlet shock position in the presence of random airflow disturbances and prevent inlet unstart. Two different linear time invariant controllers are developed. One is designed to minimize a nonquadratic index, the expected frequency of inlet unstart, and the other is designed to minimize the mean square value of inlet shock motion. The quadratic equivalence principle is used to obtain a linear controller that minimizes the nonquadratic index. The two controllers are compared on the basis of unstart prevention, control effort requirements, and frequency response. It is concluded that while controls designed to minimize unstarts are desirable in that the index minimized is physically meaningful, computation time required is longer than for the minimum mean square shock position approach. The simpler minimum mean square shock position solution produced expected unstart frequency values which were not significantly larger than those of the nonquadratic solution.

Minimizing Segregation During the Controlled Directional Solidification of Dendritic Alloys Publication: Metallurgical and Materials Transactions

NASA Technical Reports Server (NTRS)

Grugel, R. N.; Fedoseyev, A. I.; Kim, S.; Curreri, Peter A. (Technical Monitor)

2002-01-01

Gravity-driven thermosolutal convection that arises during controlled directional solidification (DS) of dendritic alloys promotes detrimental macro-segregation (e.g. freckles and steepling) in products such as turbine blades. Considerable time and effort has been spent to experimentally and theoretically investigate this phenomena; although our knowledge has advanced to the point where convection can be modeled and accurately compared to experimental results, little has been done to minimize its onset and deleterious effects. The experimental work demonstrates that segregation can be. minimized and microstructural uniformity promoted when a slow axial rotation is applied to the sample crucible during controlled directional solidification processing. Numerical modeling utilizing continuation and bifurcation methods have been employed to develop accurate physical and mathematical models with the intent of identifying and optimizing processing parameters.

Optimized Temporal Monitors for SystemC

NASA Technical Reports Server (NTRS)

Tabakov, Deian; Rozier, Kristin Y.; Vardi, Moshe Y.

2012-01-01

SystemC is a modeling language built as an extension of C++. Its growing popularity and the increasing complexity of designs have motivated research efforts aimed at the verification of SystemC models using assertion-based verification (ABV), where the designer asserts properties that capture the design intent in a formal language such as PSL or SVA. The model then can be verified against the properties using runtime or formal verification techniques. In this paper we focus on automated generation of runtime monitors from temporal properties. Our focus is on minimizing runtime overhead, rather than monitor size or monitor-generation time. We identify four issues in monitor generation: state minimization, alphabet representation, alphabet minimization, and monitor encoding. We conduct extensive experimentation and identify a combination of settings that offers the best performance in terms of runtime overhead.

Electromyographic monitoring and its anatomical implications in minimally invasive spine surgery.

PubMed

Uribe, Juan S; Vale, Fernando L; Dakwar, Elias

2010-12-15

Literature review. The objective of this article is to examine current intraoperative electromyography (EMG) neurophysiologic monitoring methods and their application in minimally invasive techniques. We will also discuss the recent application of EMG and its anatomic implications to the minimally invasive lateral transpsoas approach to the spine. Minimally invasive techniques require that the same goals of surgery be achieved, with the hope of decreased morbidity to the patient. Unlike standard open procedures, direct visualization of the anatomy is decreased. To increase the safety of minimally invasive spine surgery, neurophysiological monitoring techniques have been developed. Review of the literature was performed using the National Center for Biotechnology Information databases using PUBMED/MEDLINE. All articles in the English language discussing the use of intraoperative EMG monitoring and minimally invasive spine surgery were reviewed. The role of EMG monitoring in special reference to the minimally invasive lateral transpsoas approach is also described. In total, 76 articles were identified that discussed the role of neuromonitoring in spine surgery. The majority of articles on EMG and spine surgery discuss the use of intraoperative neurophysiological monitoring (IOM) for safe and accurate pedicle screw placement. In general, there is a paucity of literature that pertains to intraoperative EMG neuromonitoring and minimally invasive spine surgery. Recently, EMG has been used during minimally invasive lateral transpsoas approach to the lumbar spine for interbody fusion. The addition of EMG to the lateral approach has contributed to decrease the complication rate from 30% to less than 1%. In minimally invasive approaches to the spine, the use of EMG IOM might provide additional safety, such as percutaneous pedicle screw placement, where visualization is limited compared with conventional open procedures. In addition to knowledge of the anatomy and image guidance, directional EMG IOM is crucial for safe passage through the psoas muscle during the minimally invasive lateral retroperitoneal approach.

Improving Recruiting of the 6th Recruiting Brigade Through Statistical Analysis and Efficiency Measures

DTIC Science & Technology

2014-12-01

example of maximizing or minimizing decision variables within a model. Carol Stoker and Stephen Mehay present a comparative analysis of marketing and advertising strategies...strategy development process; documenting various recruiting, marketing , and advertising initiatives in each nation; and examining efforts to

Representing causal knowledge in environmental policy interventions: Advantages and opportunities for qualitative influence diagram applications

EPA Science Inventory

This article develops and explores a methodology for using qualitative influence diagrams in environmental policy and management to support decision-making efforts that minimize risk and increase resiliency. Influence diagrams are representations of the conditional aspects of a p...

38 CFR 200.4 - Implementation of NEPA and related authorities.

Code of Federal Regulations, 2011 CFR

2011-07-01

... exclusions, environmental assessments, and environmental impact statements. (2) The Master Planner, is..., minimizing potential impacts in an effort to avoid a higher level of NEPA documentation. The scope of an... significant effects on public health, safety, or the environment. (B) Reasonable likelihood of significant...

38 CFR 200.4 - Implementation of NEPA and related authorities.

Code of Federal Regulations, 2014 CFR

2014-07-01

... exclusions, environmental assessments, and environmental impact statements. (2) The Master Planner, is..., minimizing potential impacts in an effort to avoid a higher level of NEPA documentation. The scope of an... significant effects on public health, safety, or the environment. (B) Reasonable likelihood of significant...

38 CFR 200.4 - Implementation of NEPA and related authorities.

Code of Federal Regulations, 2012 CFR

2012-07-01

... exclusions, environmental assessments, and environmental impact statements. (2) The Master Planner, is..., minimizing potential impacts in an effort to avoid a higher level of NEPA documentation. The scope of an... significant effects on public health, safety, or the environment. (B) Reasonable likelihood of significant...

Comparison of "saw and seal" procedure and performance grade binder to minimize thermal cracking : interim report - third year.

DOT National Transportation Integrated Search

2004-12-01

In an effort to compare performance and cost effectiveness of the Saw and Seal procedure and : Performance Grade (PG) binders, the Maine Department of Transportation (MDOT) constructed an : experimental project in Weston, Maine during the fall ...

Comparison of "saw and seal" procedure and performance grade binder to minimize thermal cracking : interim report - second year.

DOT National Transportation Integrated Search

2004-07-01

In an effort to compare performance and cost effectiveness of the Saw and Seal procedure and : Performance Grade (PG) binders, the Maine Department of Transportation (MDOT) constructed an : experimental project in Weston, Maine during the fall ...

WASTE MINIMIZATION EFFORTS - AN OVERVIEW OF THE U.S. EPA POLLUTIONPREVENTION RESEARCH PROGRAM

EPA Science Inventory

This paper is to be presented at the Governmental Refuse,Collection, and Disposal Association's 28th Annual InternationalSolid Waste Exposition in Vancouver, B.C., Canada, August 20-24,1990. he paper's purpose is to describe the current pollutionprevention research program assign...

EPA'S APPROACH TO POLLUTION PREVENTION REF: CHEMICAL ENGINEERING PROCESS, PP. 53-58, JUNE 1989

EPA Science Inventory

EPA'S adoption of pollution prevention as the cornerstone of its future efforts on environmental protection is described as are the roles of the Pollution Prevention Office and the Waste Minimization Branch. Copy of paper available at NTIS as PB89236418.

Extreme Conservation Leads to Recovery of the Virunga Mountain Gorillas

PubMed Central

Robbins, Martha M.; Gray, Markye; Fawcett, Katie A.; Nutter, Felicia B.; Uwingeli, Prosper; Mburanumwe, Innocent; Kagoda, Edwin; Basabose, Augustin; Stoinski, Tara S.; Cranfield, Mike R.; Byamukama, James; Spelman, Lucy H.; Robbins, Andrew M.

2011-01-01

As wildlife populations are declining, conservationists are under increasing pressure to measure the effectiveness of different management strategies. Conventional conservation measures such as law enforcement and community development projects are typically designed to minimize negative human influences upon a species and its ecosystem. In contrast, we define “extreme” conservation as efforts targeted to deliberately increase positive human influences, including veterinary care and close monitoring of individual animals. Here we compare the impact of both conservation approaches upon the population growth rate of the critically endangered Virunga mountain gorillas (Gorilla beringei beringei), which increased by 50% since their nadir in 1981, from approximately 250 to nearly 400 gorillas. Using demographic data from 1967–2008, we show an annual decline of 0.7%±0.059% for unhabituated gorillas that received intensive levels of conventional conservation approaches, versus an increase 4.1%±0.088% for habituated gorillas that also received extreme conservation measures. Each group of habituated gorillas is now continuously guarded by a separate team of field staff during daylight hours and receives veterinary treatment for snares, respiratory disease, and other life-threatening conditions. These results suggest that conventional conservation efforts prevented a severe decline of the overall population, but additional extreme measures were needed to achieve positive growth. Demographic stochasticity and socioecological factors had minimal impact on variability in the growth rates. Veterinary interventions could account for up to 40% of the difference in growth rates between habituated versus unhabituated gorillas, with the remaining difference likely arising from greater protection against poachers. Thus, by increasing protection and facilitating veterinary treatment, the daily monitoring of each habituated group contributed to most of the difference in growth rates. Our results argue for wider consideration of extreme measures and offer a startling view of the enormous resources that may be needed to conserve some endangered species. PMID:21687709

Restoration of freshwater Cypress-Tupelo Wetlands in the southeastern U.S. following severe hurricanes

USGS Publications Warehouse

Conner, William H.; Krauss, Ken W.; Shaffer, Gary P.; Stanturf, John A.; Madsen, Palle; Lamb, David

2012-01-01

Freshwater forested wetlands commonly occur in the lower Coastal Plain of the southeastern US with baldcypress (Taxodium distichum [L.] L.C. Rich.) and water tupelo (Nyssa aquatica L.) often being the dominant trees. Extensive anthropogenic activities combined with eustatic sea-level rise and land subsidence have caused widespread hydrological changes in many of these forests. In addition, hurricanes (a common, although aperiodic occurrence) cause wide-spread damage from wind and storm surge events, with impacts exacerbated by human-mediated coastal modifications (e.g., dredging, navigation channels, etc.). Restoration of forested wetlands in coastal areas is important because emergent canopies can greatly diminish wind penetration, thereby reducing the wind stress available to generate surface waves and storm surge that are the major cause of damage to coastal ecosystems and their surrounding communities. While there is an overall paucity of large-scale restoration efforts within coastal forested wetlands of the southeastern US, we have determined important characteristics that should drive future efforts. Restoration efforts may be enhanced considerably if coupled with hydrological enhancement, such as freshwater, sediment, or sewage wastewater diversions. Large-scale restoration of coastal forests should be attempted to create a landscape capable of minimizing storm impacts and maximizing wetland sustainability in the face of climate change. Planting is the preferred regeneration method in many forested wetland sites because hydrological alterations have increased flooding, and planted seedlings must be protected from herbivory to enhance establishment. Programs identifying salt tolerance in coastal forest tree species need to be continued to help increase resilience to repetitive storm surge events.

In-Space Recycler Technology Demonstration

NASA Technical Reports Server (NTRS)

Hoyt, Rob; Werkheiser, NIKI; Kim, Tony

2016-01-01

In 2014, a 3D printer was installed and used successfully on the International Space Station (ISS), creating the first additively manufactured part in space. While additive manufacturing is a game changing technology for exploration missions, the process still requires raw feedstock material to fabricate parts. Without a recycling capability, a large supply of feedstock would need to be stored onboard, which negates the logistical benefits of these capabilities. Tethers Unlimited, Inc. (TUI), received a Small Business Innovation Research (SBIR) award to design and build the first In-space Recycler for demonstration aboard the ISS in 2017. To fully test this technology in microgravity, parts will be 3D printed, recycled into reusable filament, and then reprinted into new parts. Recycling scrap into printer filament is quite challenging in that a recycler must be able to handle a large variety of possible scrap configurations and densities. New challenges include: dealing with inevitable contamination of the scrap material, minimizing damage to the molecular structure of the plastic during reprocessing, managing a larger volume of hot liquid plastic, and exercising greater control over the cooling/resolidification of the material. TUI has developed an architecture that addresses these challenges by combining standard, proven technologies with novel, patented processes developed through this effort. Results show that the filament diameter achieved is more consistent than commercial filament, with only minimal degradation of material properties over recycling steps. In May 2016, TUI completed fabrication of a flight prototype, which will ultimately progress to the demonstration unit for the ISS as a testbed for future exploration missions. This capability will provide significant cost savings by reducing the launch mass and volume required for printer feedstock as well as reduce waste that must be stored or disposed.

Periodical cicadas: A minimal automaton model

NASA Astrophysics Data System (ADS)

de O. Cardozo, Giovano; de A. M. M. Silvestre, Daniel; Colato, Alexandre

2007-08-01

The Magicicada spp. life cycles with its prime periods and highly synchronized emergence have defied reasonable scientific explanation since its discovery. During the last decade several models and explanations for this phenomenon appeared in the literature along with a great deal of discussion. Despite this considerable effort, there is no final conclusion about this long standing biological problem. Here, we construct a minimal automaton model without predation/parasitism which reproduces some of these aspects. Our results point towards competition between different strains with limited dispersal threshold as the main factor leading to the emergence of prime numbered life cycles.

A neuronal model of a global workspace in effortful cognitive tasks.

PubMed

Dehaene, S; Kerszberg, M; Changeux, J P

1998-11-24

A minimal hypothesis is proposed concerning the brain processes underlying effortful tasks. It distinguishes two main computational spaces: a unique global workspace composed of distributed and heavily interconnected neurons with long-range axons, and a set of specialized and modular perceptual, motor, memory, evaluative, and attentional processors. Workspace neurons are mobilized in effortful tasks for which the specialized processors do not suffice. They selectively mobilize or suppress, through descending connections, the contribution of specific processor neurons. In the course of task performance, workspace neurons become spontaneously coactivated, forming discrete though variable spatio-temporal patterns subject to modulation by vigilance signals and to selection by reward signals. A computer simulation of the Stroop task shows workspace activation to increase during acquisition of a novel task, effortful execution, and after errors. We outline predictions for spatio-temporal activation patterns during brain imaging, particularly about the contribution of dorsolateral prefrontal cortex and anterior cingulate to the workspace.

Dosimetrically Triggered Adaptive Intensity Modulated Radiation Therapy for Cervical Cancer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lim, Karen; Stewart, James; Institute of Biomaterials and Biomedical Engineering, University of Toronto, Toronto, Ontario

2014-09-01

Purpose: The widespread use of intensity modulated radiation therapy (IMRT) for cervical cancer has been limited by internal target and normal tissue motion. Such motion increases the risk of underdosing the target, especially as planning margins are reduced in an effort to reduce toxicity. This study explored 2 adaptive strategies to mitigate this risk and proposes a new, automated method that minimizes replanning workload. Methods and Materials: Thirty patients with cervical cancer participated in a prospective clinical study and underwent pretreatment and weekly magnetic resonance (MR) scans over a 5-week course of daily external beam radiation therapy. Target volumes andmore » organs at risk (OARs) were contoured on each of the scans. Deformable image registration was used to model the accumulated dose (the real dose delivered to the target and OARs) for 2 adaptive replanning scenarios that assumed a very small PTV margin of only 3 mm to account for setup and internal interfractional motion: (1) a preprogrammed, anatomy-driven midtreatment replan (A-IMRT); and (2) a dosimetry-triggered replan driven by target dose accumulation over time (D-IMRT). Results: Across all 30 patients, clinically relevant target dose thresholds failed for 8 patients (27%) if 3-mm margins were used without replanning. A-IMRT failed in only 3 patients and also yielded an additional small reduction in OAR doses at the cost of 30 replans. D-IMRT assured adequate target coverage in all patients, with only 23 replans in 16 patients. Conclusions: A novel, dosimetry-triggered adaptive IMRT strategy for patients with cervical cancer can minimize the risk of target underdosing in the setting of very small margins and substantial interfractional motion while minimizing programmatic workload and cost.« less

Mechanical work as an indirect measure of subjective costs influencing human movement.

PubMed

Zelik, Karl E; Kuo, Arthur D

2012-01-01

To descend a flight of stairs, would you rather walk or fall? Falling seems to have some obvious disadvantages such as the risk of pain or injury. But the preferred strategy of walking also entails a cost for the use of active muscles to perform negative work. The amount and distribution of work a person chooses to perform may, therefore, reflect a subjective valuation of the trade-offs between active muscle effort and other costs, such as pain. Here we use a simple jump landing experiment to quantify the work humans prefer to perform to dissipate the energy of landing. We found that healthy normal subjects (N = 8) preferred a strategy that involved performing 37% more negative work than minimally necessary (P<0.001) across a range of landing heights. This then required additional positive work to return to standing rest posture, highlighting the cost of this preference. Subjects were also able to modulate the amount of landing work, and its distribution between active and passive tissues. When instructed to land softly, they performed 76% more work than necessary (P<0.001), with a higher proportion from active muscles (89% vs. 84%, P<0.001). Stiff-legged landings, performed by one subject for demonstration, exhibited close to the minimum of work, with more of it performed passively through soft tissue deformations (at least 30% in stiff landings vs. 16% preferred). During jump landings, humans appear not to minimize muscle work, but instead choose to perform a consistent amount of extra work, presumably to avoid other subjective costs. The degree to which work is not minimized may indirectly quantify the relative valuation of costs that are otherwise difficult to measure.

ASSESSING THE IMPACT OF SYNTHETIC-BASED DRILLING FLUIDS ON BENTHIC ORGANISMS IN TEMPERATE WATERS

EPA Science Inventory

Efforts to enhance the efficiency of oil/gas drilling operations and to minimize hazards to marine ecosystems have resulted in the increased use of synthetic-based fluids (SBF). SBFs have performance characteristics closely related to oil-based fluids (OBF) however their lower PA...

Preventing AIDS Tomorrow through Education Today.

ERIC Educational Resources Information Center

Eller, Vercie M.; And Others

In an effort to prevent the further spread of HIV (Human Immunodeficiency Virus) infections, and to minimize unwarranted fear about HIV transmission, as well as the subtle and overt limitation of people's rights resulting from this fear, the North Carolina Department of Community Colleges developed a course entitled "Preventing AIDS (Acquired…

The Purchasing Power of Collaboration

ERIC Educational Resources Information Center

Rosenthal, Amy; Mavrolas, Pamela; Rusmore, Barbara; Liquori, Toni

2017-01-01

Purpose/Objectives: School Food Focus (Focus) developed the Focus Midwest project on the premise that school food professionals (SFPs) could work together to minimize effort and maximize potential to find new or improved products to serve. Focus designed this project as an experiment to explore how and to what extent this collaborative approach…

Sensitivity and accuracy of high-throughput metabarcoding methods used to describe aquatic communities for early detection of invasve fish species

EPA Science Inventory

For early detection biomonitoring of aquatic invasive species, sensitivity to rare individuals and accurate, high-resolution taxonomic classification are critical to minimize Type I and II detection errors. Given the great expense and effort associated with morphological identifi...

Comparison of "saw and seal" procedure and performance grade binder to minimize thermal cracking : interim report - fourth year/final report.

DOT National Transportation Integrated Search

2008-12-01

In an effort to compare performance and cost effectiveness of the Saw and Seal procedure and : Performance Grade (PG) binders, the Maine Department of Transportation (MaineDOT) constructed an : experimental project in Weston, Maine during the f...

Relationship between Admission Selection Criteria and Academic Progression for Student Nurse Anesthetists

ERIC Educational Resources Information Center

Burns, Sharon M.

2009-01-01

Today's admission selection criteria require refinement with the intention of fostering academic progression for students entering nurse anesthesia programs (Reese, 2002).With the escalating cost of graduate education coupled with the current economic crisis, efforts by educational leaders to minimize attrition remains pivotal (Andrews, Johansson,…

Managing configuration software of ground software applications with glueware

NASA Technical Reports Server (NTRS)

Larsen, B.; Herrera, R.; Sesplaukis, T.; Cheng, L.; Sarrel, M.

2003-01-01

This paper reports on a simple, low-cost effort to streamline the configuration of the uplink software tools. Even though the existing ground system consisted of JPL and custom Cassini software rather than COTS, we chose a glueware approach--reintegrating with wrappers and bridges and adding minimal new functionality.

School-Based Obesity Interventions: A Literature Review

ERIC Educational Resources Information Center

Shaya, Fadia T.; Flores, David; Gbarayor, Confidence M.; Wang, Jingshu

2008-01-01

Background: Childhood obesity is an impending epidemic. This article is an overview of different interventions conducted in school settings so as to guide efforts for an effective management of obesity in children, thus minimizing the risk of adult obesity and related cardiovascular risk. Methods: PubMed and OVID Medline databases were searched…

Developing a Successful Asynchronous Online Extension Program for Forest Landowners

ERIC Educational Resources Information Center

Zobrist, Kevin W.

2014-01-01

Asynchronous online Extension classes can reach a wide audience, is convenient for the learner, and minimizes ongoing demands on instructor time. However, producing such classes takes significant effort up front. Advance planning and good communication with contributors are essential to success. Considerations include delivery platforms, content…

Cable Television and Public Safety.

ERIC Educational Resources Information Center

Cranberg, Gilbert

One of the most promising applications of cable television (CATV) is municipal surveillance of public areas for protection against crime, fire detection, control of air pollution, and traffic. Thus far, however, the CATV industry has made minimal efforts to realize the potential of CATV for community protection--the use of cable for public safety…

Why Save a Can?

ERIC Educational Resources Information Center

Gutierrez, Melida; Johnson, Cheryl

2009-01-01

This activity ties together the recycling of aluminum and the protection of rain forests. Students use critical thinking to study the effects of open pit mining of bauxite in rain forests and then draw their own conclusions about how to minimize the impact of bauxite mining and boost recycling efforts within their communities. Drawing conclusions…

Bibliographic Control of Large Quantities of Research Material.

ERIC Educational Resources Information Center

Evans, Martha M.

1983-01-01

Guidelines for individual researcher describe bibliographic methods for achieving high standards of quality while maintaining maximum efficiency in each step of all necessary procedures involved in the construction of a bibliography ranging from several hundred to several thousand items. Ways to minimize waste motion and duplication of effort are…

Standardization and Optimization of Computed Tomography Protocols to Achieve Low-Dose

PubMed Central

Chin, Cynthia; Cody, Dianna D.; Gupta, Rajiv; Hess, Christopher P.; Kalra, Mannudeep K.; Kofler, James M.; Krishnam, Mayil S.; Einstein, Andrew J.

2014-01-01

The increase in radiation exposure due to CT scans has been of growing concern in recent years. CT scanners differ in their capabilities and various indications require unique protocols, but there remains room for standardization and optimization. In this paper we summarize approaches to reduce dose, as discussed in lectures comprising the first session of the 2013 UCSF Virtual Symposium on Radiation Safety in Computed Tomography. The experience of scanning at low dose in different body regions, for both diagnostic and interventional CT procedures, is addressed. An essential primary step is justifying the medical need for each scan. General guiding principles for reducing dose include tailoring a scan to a patient, minimizing scan length, use of tube current modulation and minimizing tube current, minimizing-tube potential, iterative reconstruction, and periodic review of CT studies. Organized efforts for standardization have been spearheaded by professional societies such as the American Association of Physicists in Medicine. Finally, all team members should demonstrate an awareness of the importance of minimizing dose. PMID:24589403

Dopamine antagonism decreases willingness to expend physical, but not cognitive, effort: a comparison of two rodent cost/benefit decision-making tasks.

PubMed

Hosking, Jay G; Floresco, Stan B; Winstanley, Catharine A

2015-03-01

Successful decision making often requires weighing a given option's costs against its associated benefits, an ability that appears perturbed in virtually every severe mental illness. Animal models of such cost/benefit decision making overwhelmingly implicate mesolimbic dopamine in our willingness to exert effort for a larger reward. Until recently, however, animal models have invariably manipulated the degree of physical effort, whereas human studies of effort have primarily relied on cognitive costs. Dopamine's relationship to cognitive effort has not been directly examined, nor has the relationship between individuals' willingness to expend mental versus physical effort. It is therefore unclear whether willingness to work hard in one domain corresponds to willingness in the other. Here we utilize a rat cognitive effort task (rCET), wherein animals can choose to allocate greater visuospatial attention for a greater reward, and a previously established physical effort-discounting task (EDT) to examine dopaminergic and noradrenergic contributions to effort. The dopamine antagonists eticlopride and SCH23390 each decreased willingness to exert physical effort on the EDT; these drugs had no effect on willingness to exert mental effort for the rCET. Preference for the high effort option correlated across the two tasks, although this effect was transient. These results suggest that dopamine is only minimally involved in cost/benefit decision making with cognitive effort costs. The constructs of mental and physical effort may therefore comprise overlapping, but distinct, circuitry, and therapeutic interventions that prove efficacious in one effort domain may not be beneficial in another.

40 CFR 33.302 - Are there any additional contract administration requirements?

Code of Federal Regulations, 2014 CFR

2014-07-01

... ENVIRONMENTAL PROTECTION AGENCY PROGRAMS Good Faith Efforts § 33.302 Are there any additional contract... faith efforts described in § 33.301 if soliciting a replacement subcontractor. (d) A recipient must require its prime contractor to employ the six good faith efforts described in § 33.301 even if the prime...

40 CFR 33.302 - Are there any additional contract administration requirements?

Code of Federal Regulations, 2012 CFR

2012-07-01

... ENVIRONMENTAL PROTECTION AGENCY PROGRAMS Good Faith Efforts § 33.302 Are there any additional contract... faith efforts described in § 33.301 if soliciting a replacement subcontractor. (d) A recipient must require its prime contractor to employ the six good faith efforts described in § 33.301 even if the prime...

40 CFR 33.302 - Are there any additional contract administration requirements?

Code of Federal Regulations, 2013 CFR

2013-07-01

... ENVIRONMENTAL PROTECTION AGENCY PROGRAMS Good Faith Efforts § 33.302 Are there any additional contract... faith efforts described in § 33.301 if soliciting a replacement subcontractor. (d) A recipient must require its prime contractor to employ the six good faith efforts described in § 33.301 even if the prime...

40 CFR 33.302 - Are there any additional contract administration requirements?

Code of Federal Regulations, 2011 CFR

2011-07-01

... ENVIRONMENTAL PROTECTION AGENCY PROGRAMS Good Faith Efforts § 33.302 Are there any additional contract... faith efforts described in § 33.301 if soliciting a replacement subcontractor. (d) A recipient must require its prime contractor to employ the six good faith efforts described in § 33.301 even if the prime...

An autonomous payload controller for the Space Shuttle

NASA Technical Reports Server (NTRS)

Hudgins, J. I.

1979-01-01

The Autonomous Payload Control (APC) system discussed in the present paper was designed on the basis of such criteria as minimal cost of implementation, minimal space required in the flight-deck area, simple operation with verification of the results, minimal additional weight, minimal impact on Orbiter design, and minimal impact on Orbiter payload integration. In its present configuration, the APC provides a means for the Orbiter crew to control as many as 31 autononous payloads. The avionics and human engineering aspects of the system are discussed.

Strategies to Optimize Microbially-Mediated Mitigation of Greenhouse Gas Emissions from Landfill Cover Soils

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jeremy Semrau; Sung-Woo Lee; Jeongdae Im

2010-09-30

The overall objective of this project, 'Strategies to Optimize Microbially-Mediated Mitigation of Greenhouse Gas Emissions from Landfill Cover Soils' was to develop effective, efficient, and economic methodologies by which microbial production of nitrous oxide can be minimized while also maximizing microbial consumption of methane in landfill cover soils. A combination of laboratory and field site experiments found that the addition of nitrogen and phenylacetylene stimulated in situ methane oxidation while minimizing nitrous oxide production. Molecular analyses also indicated that methane-oxidizing bacteria may play a significant role in not only removing methane, but in nitrous oxide production as well, although themore » contribution of ammonia-oxidizing archaea to nitrous oxide production can not be excluded at this time. Future efforts to control both methane and nitrous oxide emissions from landfills as well as from other environments (e.g., agricultural soils) should consider these issues. Finally, a methanotrophic biofiltration system was designed and modeled for the promotion of methanotrophic activity in local methane 'hotspots' such as landfills. Model results as well as economic analyses of these biofilters indicate that the use of methanotrophic biofilters for controlling methane emissions is technically feasible, and provided either the costs of biofilter construction and operation are reduced or the value of CO{sub 2} credits is increased, can also be economically attractive.« less

Development and Implementation of a Coagulation Factor Testing Method Utilizing Autoverification in a High-volume Clinical Reference Laboratory Environment

PubMed Central

Riley, Paul W.; Gallea, Benoit; Valcour, Andre

2017-01-01

Background: Testing coagulation factor activities requires that multiple dilutions be assayed and analyzed to produce a single result. The slope of the line created by plotting measured factor concentration against sample dilution is evaluated to discern the presence of inhibitors giving rise to nonparallelism. Moreover, samples producing results on initial dilution falling outside the analytic measurement range of the assay must be tested at additional dilutions to produce reportable results. Methods: The complexity of this process has motivated a large clinical reference laboratory to develop advanced computer algorithms with automated reflex testing rules to complete coagulation factor analysis. A method was developed for autoverification of coagulation factor activity using expert rules developed with on an off the shelf commercially available data manager system integrated into an automated coagulation platform. Results: Here, we present an approach allowing for the autoverification and reporting of factor activity results with greatly diminished technologist effort. Conclusions: To the best of our knowledge, this is the first report of its kind providing a detailed procedure for implementation of autoverification expert rules as applied to coagulation factor activity testing. Advantages of this system include ease of training for new operators, minimization of technologist time spent, reduction of staff fatigue, minimization of unnecessary reflex tests, optimization of turnaround time, and assurance of the consistency of the testing and reporting process. PMID:28706751

Development and Implementation of a Coagulation Factor Testing Method Utilizing Autoverification in a High-volume Clinical Reference Laboratory Environment.

PubMed

Riley, Paul W; Gallea, Benoit; Valcour, Andre

2017-01-01

Testing coagulation factor activities requires that multiple dilutions be assayed and analyzed to produce a single result. The slope of the line created by plotting measured factor concentration against sample dilution is evaluated to discern the presence of inhibitors giving rise to nonparallelism. Moreover, samples producing results on initial dilution falling outside the analytic measurement range of the assay must be tested at additional dilutions to produce reportable results. The complexity of this process has motivated a large clinical reference laboratory to develop advanced computer algorithms with automated reflex testing rules to complete coagulation factor analysis. A method was developed for autoverification of coagulation factor activity using expert rules developed with on an off the shelf commercially available data manager system integrated into an automated coagulation platform. Here, we present an approach allowing for the autoverification and reporting of factor activity results with greatly diminished technologist effort. To the best of our knowledge, this is the first report of its kind providing a detailed procedure for implementation of autoverification expert rules as applied to coagulation factor activity testing. Advantages of this system include ease of training for new operators, minimization of technologist time spent, reduction of staff fatigue, minimization of unnecessary reflex tests, optimization of turnaround time, and assurance of the consistency of the testing and reporting process.

An Improved Thermal Conductivity Polyurethane Composite for a Space Borne 20KV Power Supply

NASA Technical Reports Server (NTRS)

Shapiro, Andrew A.; Haque, Inam

2005-01-01

This effort was designed to find a way to reduce the temperature rise of critical components of a 20KV High Voltage Power Supply (HVPS) by improving the overall thermal conductivity of the encapsulated modules. Three strategies were evaluated by developing complete procedures, preparing samples, and performing tests. The three strategies were: 1. Improve the thermal conductivity of the polyurethane encapsulant through the addition of thermally conductive powder while minimizing impact on other characteristics of the encapsulant. 2. Improve the thermal conductivity of the polyurethane encapsulated assembly by the addition of a slab of thermally conductive, electrically insulating material, which is to act as a heat spreader. 3. Employ a more thermally conductive substrate (Al203) with the existing encapsulation scheme. The materials were chosen based on the following criteria: high dielectric breakdown strength; high thermal conductivity, ease of manufacturing, high compliance, and other standard space qualified materials properties (low out-gassing, etc.). An optimized cure was determined by a statistical design of experiments for both filled and unfilled materials. The materials were characterized for the desired properties and a complete process was developed and tested. The thermal performance was substantially improved and the strategies may be used for space flight.

Common Data Acquisition Systems (DAS) Software Development for Rocket Propulsion Test (RPT) Test Facilities

NASA Technical Reports Server (NTRS)

Hebert, Phillip W., Sr.; Davis, Dawn M.; Turowski, Mark P.; Holladay, Wendy T.; Hughes, Mark S.

2012-01-01

The advent of the commercial space launch industry and NASA's more recent resumption of operation of Stennis Space Center's large test facilities after thirty years of contractor control resulted in a need for a non-proprietary data acquisition systems (DAS) software to support government and commercial testing. The software is designed for modularity and adaptability to minimize the software development effort for current and future data systems. An additional benefit of the software's architecture is its ability to easily migrate to other testing facilities thus providing future commonality across Stennis. Adapting the software to other Rocket Propulsion Test (RPT) Centers such as MSFC, White Sands, and Plumbrook Station would provide additional commonality and help reduce testing costs for NASA. Ultimately, the software provides the government with unlimited rights and guarantees privacy of data to commercial entities. The project engaged all RPT Centers and NASA's Independent Verification & Validation facility to enhance product quality. The design consists of a translation layer which provides the transparency of the software application layers to underlying hardware regardless of test facility location and a flexible and easily accessible database. This presentation addresses system technical design, issues encountered, and the status of Stennis development and deployment.

An Experimental Investigation into Additive Manufacturing-Induced Residual Stresses in 316L Stainless Steel

NASA Astrophysics Data System (ADS)

Wu, Amanda S.; Brown, Donald W.; Kumar, Mukul; Gallegos, Gilbert F.; King, Wayne E.

2014-12-01

Additive manufacturing (AM) technology provides unique opportunities for producing net-shape geometries at the macroscale through microscale processing. This level of control presents inherent trade-offs necessitating the establishment of quality controls aimed at minimizing undesirable properties, such as porosity and residual stresses. Here, we perform a parametric study into the effects of laser scanning pattern, power, speed, and build direction in powder bed fusion AM on residual stress. In an effort to better understand the factors influencing macroscale residual stresses, a destructive surface residual stress measurement technique (digital image correlation in conjunction with build plate removal and sectioning) has been coupled with a nondestructive volumetric evaluation method ( i.e., neutron diffraction). Good agreement between the two measurement techniques is observed. Furthermore, a reduction in residual stress is obtained by decreasing scan island size, increasing island to wall rotation to 45 deg, and increasing applied energy per unit length (laser power/speed). Neutron diffraction measurements reveal that, while in-plane residual stresses are affected by scan island rotation, axial residual stresses are unchanged. We attribute this in-plane behavior to misalignment between the greatest thermal stresses (scan direction) and largest part dimension.

Minimization and management of wastes from biomedical research.

PubMed Central

Rau, E H; Alaimo, R J; Ashbrook, P C; Austin, S M; Borenstein, N; Evans, M R; French, H M; Gilpin, R W; Hughes, J; Hummel, S J; Jacobsohn, A P; Lee, C Y; Merkle, S; Radzinski, T; Sloane, R; Wagner, K D; Weaner, L E

2000-01-01

Several committees were established by the National Association of Physicians for the Environment to investigate and report on various topics at the National Leadership Conference on Biomedical Research and the Environment held at the 1--2 November 1999 at the National Institutes of Health in Bethesda, Maryland. This is the report of the Committee on Minimization and Management of Wastes from Biomedical Research. Biomedical research facilities contribute a small fraction of the total amount of wastes generated in the United States, and the rate of generation appears to be decreasing. Significant reductions in generation of hazardous, radioactive, and mixed wastes have recently been reported, even at facilities with rapidly expanding research programs. Changes in the focus of research, improvements in laboratory techniques, and greater emphasis on waste minimization (volume and toxicity reduction) explain the declining trend in generation. The potential for uncontrolled releases of wastes from biomedical research facilities and adverse impacts on the general environment from these wastes appears to be low. Wastes are subject to numerous regulatory requirements and are contained and managed in a manner protective of the environment. Most biohazardous agents, chemicals, and radionuclides that find significant use in research are not likely to be persistent, bioaccumulative, or toxic if they are released. Today, the primary motivations for the ongoing efforts by facilities to improve minimization and management of wastes are regulatory compliance and avoidance of the high disposal costs and liabilities associated with generation of regulated wastes. The committee concluded that there was no evidence suggesting that the anticipated increases in biomedical research will significantly increase generation of hazardous wastes or have adverse impacts on the general environment. This conclusion assumes the positive, countervailing trends of enhanced pollution prevention efforts by facilities and reductions in waste generation resulting from improvements in research methods will continue. PMID:11121362

Psychological response to the Oklahoma City bombing.

PubMed

Krug, R S; Nixon, S J; Vincent, R

1996-01-01

The bombing of the Alfred P. Murrah Federal Office Building in Oklahoma City was the most devastating terrorist activity that has occurred in America. Prevention of revictimization of persons seriously affected by the bombing was central to the planned response to this tragedy. Coordination and collaboration among local, state, and national agencies promoted effective clinical services provision, research facilitation, and prevention of revictimization. Information gathered from this cooperative effort will contribute to the effort to minimize the potential for such tragedies in the future as well as help to develop prevention and intervention strategies to reduce the effects when the next such disaster occurs.

Multipartite Entanglement Detection with Minimal Effort

NASA Astrophysics Data System (ADS)

Knips, Lukas; Schwemmer, Christian; Klein, Nico; Wieśniak, Marcin; Weinfurter, Harald

2016-11-01

Certifying entanglement of a multipartite state is generally considered a demanding task. Since an N qubit state is parametrized by 4N-1 real numbers, one might naively expect that the measurement effort of generic entanglement detection also scales exponentially with N . Here, we introduce a general scheme to construct efficient witnesses requiring a constant number of measurements independent of the number of qubits for states like, e.g., Greenberger-Horne-Zeilinger states, cluster states, and Dicke states. For four qubits, we apply this novel method to experimental realizations of the aforementioned states and prove genuine four-partite entanglement with two measurement settings only.

Hot Isostatic Pressing of Engineered Forms of I-AgZ

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jubin, Robert Thomas; Watkins, Thomas R.; Bruffey, Stephanie H.

Hot isostatic pressing (HIP) is being considered for direct conversion of 129I-bearing materials to a radiological waste form. The removal of volatile radioactive 129I from the off-gas of a nuclear fuel reprocessing facility will be necessary to comply with regulatory requirements regarding reprocessing facilities sited within the United States, and any iodine-containing media or solid sorbents generated by offgas abatement will require disposal. Zeolite minerals such as silver-exchanged mordenite (AgZ) have been studied as potential iodine sorbents and will contain 129I as chemisorbed AgI. Oak Ridge National Laboratory (ORNL) has conducted several recent studies on the HIP of both iodine-loadedmore » AgZ (I-AgZ) and other iodine-bearing zeolite minerals. The goal of these research efforts is to achieve a stable, highly leach resistant material that is reduced in volume as compared to bulk iodine-loaded I-AgZ. Through the use of HIP, it may be possible to achieve this with the addition of little or no additional materials (waste formers). Other goals for the process include that the waste form will be tolerant to high temperatures and pressures, not chemically hazardous, and that the process will result in minimal secondary waste generation. This document describes the preparation of 27 samples that are distinct from previous efforts in that they are prepared exclusively with an engineered form of AgZ that is manufactured using a binder. Iodine was incorporated solely by chemisorption. This base material is expected to be more representative of an operational system than were samples prepared previously with pure minerals.« less

Technology Transfer Challenges: A Case Study of User-Centered Design in NASA's Systems Engineering Culture

NASA Technical Reports Server (NTRS)

Quick, Jason

2009-01-01

The Upper Stage (US) section of the National Aeronautics and Space Administration's (NASA) Ares I rocket will require internal access platforms for maintenance tasks performed by humans inside the vehicle. Tasks will occur during expensive critical path operations at Kennedy Space Center (KSC) including vehicle stacking and launch preparation activities. Platforms must be translated through a small human access hatch, installed in an enclosed worksite environment, support the weight of ground operators and be removed before flight - and their design must minimize additional vehicle mass at attachment points. This paper describes the application of a user-centered conceptual design process and the unique challenges encountered within NASA's systems engineering culture focused on requirements and "heritage hardware". The NASA design team at Marshall Space Flight Center (MSFC) initiated the user-centered design process by studying heritage internal access kits and proposing new design concepts during brainstorming sessions. Simultaneously, they partnered with the Technology Transfer/Innovative Partnerships Program to research inflatable structures and dynamic scaffolding solutions that could enable ground operator access. While this creative, technology-oriented exploration was encouraged by upper management, some design stakeholders consistently opposed ideas utilizing novel, untested equipment. Subsequent collaboration with an engineering consulting firm improved the technical credibility of several options, however, there was continued resistance from team members focused on meeting system requirements with pre-certified hardware. After a six-month idea-generating phase, an intensive six-week effort produced viable design concepts that justified additional vehicle mass while optimizing the human factors of platform installation and use. Although these selected final concepts closely resemble heritage internal access platforms, challenges from the application of the user-centered process provided valuable lessons for improving future collaborative conceptual design efforts.

Controlling Their Own Destinies

ERIC Educational Resources Information Center

Principal Leadership, 2007

2007-01-01

From preschool through high school graduation and sometimes beyond, students are told what to do, where to go, and when to go there. It is little wonder that some students have become all too comfortable with minimal effort and lack-luster achievement. Even the highest-achieving schools have students who are not being engaged or challenged.…

Model Centers Program for Learning Disabled Children: Historical Perspective.

ERIC Educational Resources Information Center

Senf, Gerald M.

This document describes the present federal effort on behalf of learning disabled children, beginning with its recent history. It traces the field of learning disabilities as a subspecialty within education from 1963, when a steering committee was appointed to organize a symposium on "The Child with Minimal Brain Dysfunction," through the Learning…

32 CFR 651.29 - Determining when to use a CX (screening criteria).

Code of Federal Regulations, 2010 CFR

2010-07-01

... action has not been segmented to meet the definition of a CX. Segmentation can occur when an action is... action can be too narrowly defined, minimizing potential impacts in an effort to avoid a higher level of... formal Clean Air Act conformity determination is required. (8) Reasonable likelihood of violating any...

Defining Common Ground: A Grass Roots Model for University-Public School Collaboration.

ERIC Educational Resources Information Center

Starlings, Cable; Dybdahl, Claudia S.

1994-01-01

A collaborative, grass-roots partnership focusing on students at risk for educational failure has been developed by the University of Alaska Anchorage and the Anchorage (Alaska) School District. The effort is distinguished by a perception of common ground, a minimal administrative and financial structure, and a high degree of commitment from…

Distance Learning and Cloud Computing: "Just Another Buzzword or a Major E-Learning Breakthrough?"

ERIC Educational Resources Information Center

Romiszowski, Alexander J.

2012-01-01

"Cloud computing is a model for the enabling of ubiquitous, convenient, and on-demand network access to a shared pool of configurable computing resources (e.g., networks, servers, storage, applications, and other services) that can be rapidly provisioned and released with minimal management effort or service provider interaction." This…

Getting Set to Go: Upgrading Migration through an Innovative Educational Programme

ERIC Educational Resources Information Center

Khandelwal, Rajiv; Gilbert, Elon

2007-01-01

In the context of areas that have little prospect in the medium term of providing even minimal livelihoods locally for their overwhelming poor and increasingly migration-dependent rural populations, what does education for sustainable development (ESD) mean? Do efforts to qualitatively improve migration offer a viable strategy for reducing poverty…

Rethinking Roles, Relationships and Voices in Studies of Undergraduate Student Writers

ERIC Educational Resources Information Center

Looker, Samantha

2012-01-01

Undergraduate students have a complex and often problematic history of representation in research on writing pedagogy. They have been described as novices and outsiders, while having minimal input into how they are studied and represented. In this piece, I share my efforts to rethink the roles and relationships among researchers and student…

78 FR 19766 - Self-Regulatory Organizations; NYSE Arca, Inc.; Order Granting Approval of Proposed Rule Change...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-02

... investment grade quality and will rely on fundamental credit analysis in an effort to attempt to minimize the..., they can also include thrift institutions, insurance companies, or finance companies (or their... Senior Loans are generally repaid before unsecured bank loans, corporate bonds, subordinated debt, trade...

78 FR 10233 - Self-Regulatory Organizations; NYSE Arca, Inc.; Notice of Filing of Proposed Rule Change Relating...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-13

... fundamental credit analysis in an effort to attempt to minimize the loss of the Portfolio's capital.\\11\\ The..., insurance companies or finance companies (or their affiliates). Such companies may be especially susceptible... generally repaid before unsecured bank loans, corporate bonds, subordinated debt, trade creditors, and...

Regulatory Strategies for Preventing Youth Access to Alcohol: Best Practices. Revised

ERIC Educational Resources Information Center

Mosher, James F.; Stewart, Kathryn

2011-01-01

State and local regulations--laws, ordinances, policies--form the framework of any effort to reduce underage drinking. The right regulations, well crafted, can minimize the opportunities for young people to use alcohol and maximize opportunities for effective and efficient enforcement. The absence of an important regulation, or loopholes in the…

Chronically Ill Children: Divisions of Labor.

ERIC Educational Resources Information Center

Oremland, Evelyn K.

(A division of labor model was applied in a study of the efforts to minimize health crises and maximize benefits of medical protocols in eight families, each with a hemophilic school-age boy. Subject families were studied for a 5-year period through participant-observer techniques including interviews with the children in their homes, with the…

The Science of Public Messages for Suicide Prevention: A Workshop Summary

ERIC Educational Resources Information Center

Chambers, David A.; Pearson, Jane L.; Lubell, Keri; Brandon, Susan; O'Brien, Kevin; Zinn, Janet

2005-01-01

There is minimal guidance for efforts to create effective public messages that increase awareness that suicide is preventable. To address this need, several agencies in the U.S. Department of Health and Human Services and the Annenberg Foundation convened a workshop consisting of suicide prevention advocates and persons with expertise in public…

A Study of Cooperative, Networking, and Computer Activities in Southwestern Libraries.

ERIC Educational Resources Information Center

Corbin, John

The Southwestern Library Association (SWLA) conducted an inventory and study of the SWLA libraries in cooperative, network, and computer activities to collect data for use in planning future activities and in minimizing duplication of efforts. Questionnaires were mailed to 2,060 academic, public, and special libraries in the six SWLA states.…

Blurring the Boundaries: Reflecting on PDS Roles and Responsibilities through Multiple Lenses

ERIC Educational Resources Information Center

Larson, Lotta C.; Lickteig, Amanda D.; Sherbert, Vicki S.; Nauerth, Deborah A.

2014-01-01

It is well documented that successful Professional Development School (PDS) initiatives are contingent on trusting relationships between the university and school districts. Over the past 25 years, continual efforts have been made by the Kansas State University (KSU) PDS to minimize notions of status while maintaining mutually beneficial goals and…

Strengthening Resilience in Children and Youths: Maximizing Opportunities through the Schools

ERIC Educational Resources Information Center

Brooks, Jean E.

2006-01-01

Children and youths are at risk of some negative outcomes because of hazards in their environment. A review of the literature on resilience provides guidelines for minimizing risks and promoting positive outcomes for children and youths. This article provides a rationale for incorporating resilience-building efforts in schools and explores ways in…

Engineering Education: A Clear Content Base for Standards

ERIC Educational Resources Information Center

Grubbs, Michael E.; Strimel, Greg J.; Huffman, Tanner

2018-01-01

Interest in engineering at the P-12 level has increased in recent years, largely in response to STEM educational reform. Despite greater attention to the value, importance, and use of engineering for teaching and learning, the educational community has engaged minimally in its deliberate and coherent study. Specifically, few efforts have been…

Secret Shopping as User Experience Assessment Tool

ERIC Educational Resources Information Center

Boyce, Crystal M.

2015-01-01

Secret shopping is a form of unobtrusive evaluation that can be accomplished with minimal effort, but still produce rich results. With as few as 11 shoppers, the author was able to identify trends in user satisfaction with services provided across two entry-level desks at Illinois Wesleyan University's The Ames Library. The focus of this secret…

Human Factors of Queuing: A Library Circulation Model.

ERIC Educational Resources Information Center

Mansfield, Jerry W.

1981-01-01

Classical queuing theories and their accompanying service facilities totally disregard the human factors in the name of efficiency. As library managers we need to be more responsive to human needs in the design of service points and make every effort to minimize queuing and queue frustration. Five references are listed. (Author/RAA)

A Guide for Delinquency Prevention Programs Based in School Activities: A Working Paper.

ERIC Educational Resources Information Center

Johnson, Grant; And Others

This paper is intended to help program developers to initiate or refine school-based, self-contained delinquency prevention programs. These programs are limited, short-term efforts to minimize delinquent behavior among youth by creating school situations in which the factors that contribute to delinquent behavior are reduced. Designed as an…

Parental Involvement in Emergent Literacy Skills of Urban Head Start Children.

ERIC Educational Resources Information Center

Nespeca, Sue McCleaf

1995-01-01

Explored the impact of parental involvement and of public libraries on Head Start children's emerging literacy skills. Found differences in the amount of parental involvement in literacy activities and the types of activities. Library use was minimal for fear of damaging books, transportation problems, or lack of time or effort. Suggested…

Mitigating the Harmful Effects of Violent Television

ERIC Educational Resources Information Center

Rosenkoetter, Lawrence I.; Rosenkoetter, Sharon E.; Ozretich, Rachel A.; Acock, Alan C.

2004-01-01

In an effort to minimize the harmful effects of violent TV, a yearlong intervention was undertaken with children in Grades 1 through 3 (N = 177). The classroom-based intervention consisted of 31 brief lessons that emphasized the many ways in which television distorts violence. As hypothesized, the intervention resulted in a reduction in children's…

Optimal UAS Assignments and Trajectories for Persistent Surveillance and Data Collection from a Wireless Sensor Network

DTIC Science & Technology

2015-12-24

minimizing a weighted sum ofthe time and control effort needed to collect sensor data. This problem formulation is a modified traveling salesman ...29 2.5 The Shortest Path Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 2.5.1 Traveling Salesman Problem ...48 3.3.1 Initial Guess by Traveling Salesman Problem Solution

Efforts to estimate pesticide degradation rates in subsurface vadose and aquifer materials

EPA Science Inventory

When pesticides are used in real-world settings, the objective is to be effective in pest eradication at the site of application, but also it is desired that the pesticide have minimal persistence and mobility as it migrates away from the application site. At the site of applicat...

Factors that limit compliance with low-impact recommendations

Treesearch

James A. Harding; William T. Borrie; David N. Cole

2000-01-01

Despite widespread efforts to minimize resource impacts, a number of remote areas continue to suffer from poor backcountry practices. Research to evaluate the effectiveness of low-impact communication strategies as they relate to recall of messages (Cole and others 1997) measured whether or not recreationists were aware of appropriate behavior given certain scenarios;...

Unitized Regenerative Fuel Cell System Development

NASA Technical Reports Server (NTRS)

Burke, Kenneth A.

2003-01-01

Unitized Regenerative Fuel Cells (URFC) have recently been developed by several fuel cell manufacturers. These manufacturers have concentrated their efforts on the development of the cell stack technology itself, and have not up to this point devoted much effort to the design and development of the balance of plant. A fuel cell technology program at the Glenn Research Center (GRC) that has as its goal the definition and feasibility testing of the URFC system balance of plant. Besides testing the feasibility, the program also intends to minimize the system weight, volume, and parasitic power as its goal. The design concept currently being developed uses no pumps to circulate coolant or reactants, and minimizes the ancillary components to only the oxygen and hydrogen gas storage tanks, a water storage tank, a loop heat pipe to control the temperature and two pressure control devices to control the cell stack pressures during operation. The information contained in this paper describes the design and operational concepts employed in this concept. The paper also describes the NASA Glenn research program to develop this concept and test its feasibility.

Linear-Quadratic-Gaussian Regulator Developed for a Magnetic Bearing

NASA Technical Reports Server (NTRS)

Choi, Benjamin B.

2002-01-01

Linear-Quadratic-Gaussian (LQG) control is a modern state-space technique for designing optimal dynamic regulators. It enables us to trade off regulation performance and control effort, and to take into account process and measurement noise. The Structural Mechanics and Dynamics Branch at the NASA Glenn Research Center has developed an LQG control for a fault-tolerant magnetic bearing suspension rig to optimize system performance and to reduce the sensor and processing noise. The LQG regulator consists of an optimal state-feedback gain and a Kalman state estimator. The first design step is to seek a state-feedback law that minimizes the cost function of regulation performance, which is measured by a quadratic performance criterion with user-specified weighting matrices, and to define the tradeoff between regulation performance and control effort. The next design step is to derive a state estimator using a Kalman filter because the optimal state feedback cannot be implemented without full state measurement. Since the Kalman filter is an optimal estimator when dealing with Gaussian white noise, it minimizes the asymptotic covariance of the estimation error.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Alfred J. Karns

This report summarizes the waste minimization efforts undertaken by National Security Technologies, LLC (NSTec), for the U. S. Department of Energy (DOE) National Nuclear Security Administration Nevada Site Office (NNSA/NSO), during CY06. This report was developed in accordance with the requirements of the Nevada Test Site (NTS) Resource Conservation and Recovery Act (RCRA) Permit (No. NEV HW0021) and as clarified in a letter dated April 21, 1995, from Paul Liebendorfer of the Nevada Division of Environmental Protection to Donald Elle of the DOE, Nevada Operations Office. The NNSA/NSO Pollution Prevention (P2) Program establishes a process to reduce the volume andmore » toxicity of waste generated by the NNSA/NSO and ensures that proposed methods of treatment, storage, and/or disposal of waste minimize potential threats to human health and the environment. The following information provides an overview of the P2 Program, major P2 accomplishments during the reporting year, a comparison of the current year waste generation to prior years, and a description of efforts undertaken during the year to reduce the volume and toxicity of waste generated by the NNSA/NSO.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

NSTec Environmental Management

This report summarizes the waste minimization efforts undertaken by National Security Technologies, LLC (NSTec), for the U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO), during calendar year (CY) 2007. This report was developed in accordance with the requirements of the Nevada Test Site (NTS) Resource Conservation and Recovery Act (RCRA) Permit (number NEV HW0021), and as clarified in a letter dated April 21, 1995, from Paul Liebendorfer of the Nevada Division of Environmental Protection to Donald Elle of the U.S. Department of Energy, Nevada Operations Office. The NNSA/NSO Pollution Prevention (P2) Program establishes a process tomore » reduce the volume and toxicity of waste generated by the NNSA/NSO and ensures that proposed methods of treatment, storage, and/or disposal of waste minimize potential threats to human health and the environment. The following information provides an overview of the P2 Program, major P2 accomplishments during the reporting year, a comparison of the current year waste generation to prior years, and a description of efforts undertaken during the year to reduce the volume and toxicity of waste generated by the NNSA/NSO.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

NSTec Environmental Restoration

This report summarizes the waste minimization efforts undertaken by National Security Technologies, LLC, for the U. S. Department of Energy, National Nuclear Security Administration Nevada Site Office (NNSA/NSO), during calendar year 2009. This report was developed in accordance with the requirements of the Nevada Test Site Resource Conservation and Recovery Act Permit (No. NEV HW0021), and as clarified in a letter dated April 21, 1995, from Paul Liebendorfer of the Nevada Division of Environmental Protection to Donald Elle of the U.S. Department of Energy, Nevada Operations Office. The NNSA/NSO Pollution Prevention (P2) Program establishes a process to reduce the volumemore » and toxicity of waste generated by NNSA/NSO activities and ensures that proposed methods of treatment, storage, and/or disposal of waste minimize potential threats to human health and the environment. The following information provides an overview of the P2 Program, major P2 accomplishments during the reporting year, a comparison of the current year waste generation to prior years, and a description of efforts undertaken during the year to reduce the volume and toxicity of waste generated by NNSA/NSO.« less

Raman scattering spectroscopy for explosives identification

NASA Astrophysics Data System (ADS)

Nagli, L.; Gaft, M.

2007-04-01

Real time detection and identification of explosives at a standoff distance is a major issue in efforts to develop defense against so-called Improvised Explosive Devices (IED). It is recognized that the only technique, which is potentially capable to standoff detection of minimal amounts of explosives is laser-based spectroscopy. LDS technique belongs to trace detection, namely to its micro-particles variety. We applied gated Raman and time-resolved luminescence spectroscopy for detection of main explosive materials, both factory and homemade. Raman system was developed and tested by LDS for field remote detection and identification of minimal amounts of explosives on relevant surfaces at a distance of up to 30 meters.

The Abbreviation of Personality, or how to Measure 200 Personality Scales with 200 Items

PubMed Central

Yarkoni, Tal

2010-01-01

Personality researchers have recently advocated the use of very short personality inventories in order to minimize administration time. However, few such inventories are currently available. Here I introduce an automated method that can be used to abbreviate virtually any personality inventory with minimal effort. After validating the method against existing measures in Studies 1 and 2, a new 181-item inventory is generated in Study 3 that accurately recaptures scores on 8 different broadband inventories comprising 203 distinct scales. Collectively, the results validate a powerful new way to improve the efficiency of personality measurement in research settings. PMID:20419061

Comparative Influence of Ocean Conditions on Yellowfin and Atlantic Bluefin Tuna Catch from Longlines in the Gulf of Mexico

PubMed Central

Teo, Steven L. H.; Block, Barbara A.

2010-01-01

Directed fishing effort for Atlantic bluefin tuna in the Gulf of Mexico (GOM), their primary spawning grounds in the western Atlantic, has been prohibited since the 1980s due to a precipitous decline of the spawning stock biomass. However, pelagic longlines targeted at other species, primarily yellowfin tuna and swordfish, continue to catch Atlantic bluefin tuna in the GOM as bycatch. Spatial and temporal management measures minimizing bluefin tuna bycatch in the GOM will likely become important in rebuilding the western Atlantic bluefin stock. In order to help inform management policy and understand the relative distribution of target and bycatch species in the GOM, we compared the spatiotemporal variability and environmental influences on the catch per unit effort (CPUE) of yellowfin (target) and bluefin tuna (bycatch). Catch and effort data from pelagic longline fisheries observers (1993–2005) and scientific tagging cruises (1998–2002) were coupled with environmental and biological data. Negative binomial models were used to fit the data for both species and Akaike's Information Criterion (corrected for small sample size) was used to determine the best model. Our results indicate that bluefin CPUE had higher spatiotemporal variability as compared to yellowfin CPUE. Bluefin CPUE increased substantially during the breeding months (March-June) and peaked in April and May, while yellowfin CPUE remained relatively high throughout the year. In addition, bluefin CPUE was significantly higher in areas with negative sea surface height anomalies and cooler sea surface temperatures, which are characteristic of mesoscale cyclonic eddies. In contrast, yellowfin CPUE was less sensitive to environmental variability. These differences in seasonal variability and sensitivity to environmental influences suggest that bluefin tuna bycatch in the GOM can be reduced substantially by managing the spatial and temporal distribution of the pelagic longline effort without substantially impacting yellowfin tuna catches. PMID:20526356

Neural and psychophysiological correlates of human performance under stress and high mental workload.

PubMed

Mandrick, Kevin; Peysakhovich, Vsevolod; Rémy, Florence; Lepron, Evelyne; Causse, Mickaël

2016-12-01

In our anxiogenic and stressful world, the maintenance of an optimal cognitive performance is a constant challenge. It is particularly true in complex working environments (e.g. flight deck, air traffic control tower), where individuals have sometimes to cope with a high mental workload and stressful situations. Several models (i.e. processing efficiency theory, cognitive-energetical framework) have attempted to provide a conceptual basis on how human performance is modulated by high workload and stress/anxiety. These models predict that stress can reduce human cognitive efficiency, even in the absence of a visible impact on the task performance. Performance may be protected under stress thanks to compensatory effort, but only at the expense of a cognitive cost. Yet, the psychophysiological cost of this regulation remains unclear. We designed two experiments involving pupil diameter, cardiovascular and prefrontal oxygenation measurements. Participants performed the Toulouse N-back Task that intensively engaged both working memory and mental calculation processes under the threat (or not) of unpredictable aversive sounds. The results revealed that higher task difficulty (higher n level) degraded the performance and induced an increased tonic pupil diameter, heart rate and activity in the lateral prefrontal cortex, and a decreased phasic pupil response and heart rate variability. Importantly, the condition of stress did not impact the performance, but at the expense of a psychophysiological cost as demonstrated by lower phasic pupil response, and greater heart rate and prefrontal activity. Prefrontal cortex seems to be a central region for mitigating the influence of stress because it subserves crucial functions (e.g. inhibition, working memory) that can promote the engagement of coping strategies. Overall, findings confirmed the psychophysiological cost of both mental effort and stress. Stress likely triggered increased motivation and the recruitment of additional cognitive resources that minimize its aversive effects on task performance (effectiveness), but these compensatory efforts consumed resources that caused a loss of cognitive efficiency (ratio between performance effectiveness and mental effort). Copyright © 2016 Elsevier B.V. All rights reserved.

Patient Characterization Protocols for Psychophysiological Studies of Traumatic Brain Injury and Post-TBI Psychiatric Disorders

PubMed Central

Rapp, Paul E.; Rosenberg, Brenna M.; Keyser, David O.; Nathan, Dominic; Toruno, Kevin M.; Cellucci, Christopher J.; Albano, Alfonso M.; Wylie, Scott A.; Gibson, Douglas; Gilpin, Adele M. K.; Bashore, Theodore R.

2013-01-01

Psychophysiological investigations of traumatic brain injury (TBI) are being conducted for several reasons, including the objective of learning more about the underlying physiological mechanisms of the pathological processes that can be initiated by a head injury. Additional goals include the development of objective physiologically based measures that can be used to monitor the response to treatment and to identify minimally symptomatic individuals who are at risk of delayed-onset neuropsychiatric disorders following injury. Research programs studying TBI search for relationships between psychophysiological measures, particularly ERP (event-related potential) component properties (e.g., timing, amplitude, scalp distribution), and a participant’s clinical condition. Moreover, the complex relationships between brain injury and psychiatric disorders are receiving increased research attention, and ERP technologies are making contributions to this effort. This review has two objectives supporting such research efforts. The first is to review evidence indicating that TBI is a significant risk factor for post-injury neuropsychiatric disorders. The second objective is to introduce ERP researchers who are not familiar with neuropsychiatric assessment to the instruments that are available for characterizing TBI, post-concussion syndrome, and psychiatric disorders. Specific recommendations within this very large literature are made. We have proceeded on the assumption that, as is typically the case in an ERP laboratory, the investigators are not clinically qualified and that they will not have access to participant medical records. PMID:23885250

What makes a reach movement effortful? Physical effort discounting supports common minimization principles in decision making and motor control

PubMed Central

Ulbrich, Philipp; Gail, Alexander

2017-01-01

When deciding between alternative options, a rational agent chooses on the basis of the desirability of each outcome, including associated costs. As different options typically result in different actions, the effort associated with each action is an essential cost parameter. How do humans discount physical effort when deciding between movements? We used an action-selection task to characterize how subjective effort depends on the parameters of arm transport movements and controlled for potential confounding factors such as delay discounting and performance. First, by repeatedly asking subjects to choose between 2 arm movements of different amplitudes or durations, performed against different levels of force, we identified parameter combinations that subjects experienced as identical in effort (isoeffort curves). Movements with a long duration were judged more effortful than short-duration movements against the same force, while movement amplitudes did not influence effort. Biomechanics of the movements also affected effort, as movements towards the body midline were preferred to movements away from it. Second, by introducing movement repetitions, we further determined that the cost function for choosing between effortful movements had a quadratic relationship with force, while choices were made on the basis of the logarithm of these costs. Our results show that effort-based action selection during reaching cannot easily be explained by metabolic costs. Instead, force-loaded reaches, a widely occurring natural behavior, imposed an effort cost for decision making similar to cost functions in motor control. Our results thereby support the idea that motor control and economic choice are governed by partly overlapping optimization principles. PMID:28586347

A New Instrument Design for Imaging Low Energy Neutral Atoms

NASA Technical Reports Server (NTRS)

Keller, John W.; Collier, Michael R.; Chornay, Dennis; Rozmarynowski, Paul; Getty, Stephanie; Cooper, John F.; Smith, Billy

2007-01-01

The MidSTAR-2 satellite, to be built at the US Naval Academy as a follow-on to the successful MidSTAR-1 satellite (http://web.ew.usna.edu/midstar/), will launch in 2011 and carry three Goddard Space Flight Center (GSFC) experiments developed under Goddard's Internal Research and Development (IRAD) program. One of these GSFC instruments, the Miniature Imager for Neutral Ionospheric atoms and Magnetospheric Electrons (MINI-ME) builds on the heritage of the Goddard-developed Low-Energy Neutral Atom (LENA) imager launched on the IMAGE spacecraft in 2000. MINI-ME features a Venetian-blind conversion surface assembly that improves both light rejection and conversion efficiency in a smaller and lighter package than LENA making this an highly effective instrument for viewing solar wind charge exchange with terrestrial and planetary exospheres. We will describe the MINI-ME prototyping effort and its science targets.

Automated Design of Complex Dynamic Systems

PubMed Central

Hermans, Michiel; Schrauwen, Benjamin; Bienstman, Peter; Dambre, Joni

2014-01-01

Several fields of study are concerned with uniting the concept of computation with that of the design of physical systems. For example, a recent trend in robotics is to design robots in such a way that they require a minimal control effort. Another example is found in the domain of photonics, where recent efforts try to benefit directly from the complex nonlinear dynamics to achieve more efficient signal processing. The underlying goal of these and similar research efforts is to internalize a large part of the necessary computations within the physical system itself by exploiting its inherent non-linear dynamics. This, however, often requires the optimization of large numbers of system parameters, related to both the system's structure as well as its material properties. In addition, many of these parameters are subject to fabrication variability or to variations through time. In this paper we apply a machine learning algorithm to optimize physical dynamic systems. We show that such algorithms, which are normally applied on abstract computational entities, can be extended to the field of differential equations and used to optimize an associated set of parameters which determine their behavior. We show that machine learning training methodologies are highly useful in designing robust systems, and we provide a set of both simple and complex examples using models of physical dynamical systems. Interestingly, the derived optimization method is intimately related to direct collocation a method known in the field of optimal control. Our work suggests that the application domains of both machine learning and optimal control have a largely unexplored overlapping area which envelopes a novel design methodology of smart and highly complex physical systems. PMID:24497969

The pharmacology of effort-related choice behavior: Dopamine, depression, and individual differences.

PubMed

Salamone, John D; Correa, Merce; Yohn, Samantha; Lopez Cruz, Laura; San Miguel, Noemi; Alatorre, Luisa

2016-06-01

This review paper is focused upon the involvement of mesolimbic dopamine (DA) and related brain systems in effort-based processes. Interference with DA transmission affects instrumental behavior in a manner that interacts with the response requirements of the task, such that rats with impaired DA transmission show a heightened sensitivity to ratio requirements. Impaired DA transmission also affects effort-related choice behavior, which is assessed by tasks that offer a choice between a preferred reinforcer that has a high work requirement vs. less preferred reinforcer that can be obtained with minimal effort. Rats and mice with impaired DA transmission reallocate instrumental behavior away from food-reinforced tasks with high response costs, and show increased selection of low reinforcement/low cost options. Tests of effort-related choice have been developed into models of pathological symptoms of motivation that are seen in disorders such as depression and schizophrenia. These models are being employed to explore the effects of conditions associated with various psychopathologies, and to assess drugs for their potential utility as treatments for effort-related symptoms. Studies of the pharmacology of effort-based choice may contribute to the development of treatments for symptoms such as psychomotor slowing, fatigue or anergia, which are seen in depression and other disorders. Copyright © 2016 Elsevier B.V. All rights reserved.

Defense Additive Manufacturing: DOD Needs to Systematically Track Department-wide 3D Printing Efforts

DTIC Science & Technology

2015-10-01

Clip Additively Manufactured • The Navy installed a 3D printer aboard the USS Essex to demonstrate the ability to additively develop and produce...desired result and vision to have the capability on the fleet. These officials stated that the Navy plans to install 3D printers on two additional...DEFENSE ADDITIVE MANUFACTURING DOD Needs to Systematically Track Department-wide 3D Printing Efforts Report to

NASA OSMA NDE Program Additive Manufacturing Foundational Effort

NASA Technical Reports Server (NTRS)

Waller, Jess; Walker, James; Burke, Eric; Wells, Douglas

2016-01-01

NASA is providing key leadership in an international effort linking NASA and non-NASA resources to speed adoption of additive manufacturing (AM) to meet NASA's mission goals. Participants include industry, NASA's space partners, other government agencies, standards organizations and academia. Nondestructive Evaluation (NDE) is identified as a universal need for all aspects of additive manufacturing.

Extracellular space preservation aids the connectomic analysis of neural circuits

PubMed Central

Pallotto, Marta; Watkins, Paul V; Fubara, Boma; Singer, Joshua H; Briggman, Kevin L

2015-01-01

Dense connectomic mapping of neuronal circuits is limited by the time and effort required to analyze 3D electron microscopy (EM) datasets. Algorithms designed to automate image segmentation suffer from substantial error rates and require significant manual error correction. Any improvement in segmentation error rates would therefore directly reduce the time required to analyze 3D EM data. We explored preserving extracellular space (ECS) during chemical tissue fixation to improve the ability to segment neurites and to identify synaptic contacts. ECS preserved tissue is easier to segment using machine learning algorithms, leading to significantly reduced error rates. In addition, we observed that electrical synapses are readily identified in ECS preserved tissue. Finally, we determined that antibodies penetrate deep into ECS preserved tissue with only minimal permeabilization, thereby enabling correlated light microscopy (LM) and EM studies. We conclude that preservation of ECS benefits multiple aspects of the connectomic analysis of neural circuits. DOI: http://dx.doi.org/10.7554/eLife.08206.001 PMID:26650352

Hyaluronan hydrogels with a low degree of modification as scaffolds for cartilage engineering.

PubMed

La Gatta, Annalisa; Ricci, Giulia; Stellavato, Antonietta; Cammarota, Marcella; Filosa, Rosanna; Papa, Agata; D'Agostino, Antonella; Portaccio, Marianna; Delfino, Ines; De Rosa, Mario; Schiraldi, Chiara

2017-10-01

In the field of cartilage engineering, continuing efforts have focused on fabricating scaffolds that favor maintenance of the chondrocytic phenotype and matrix formation, in addition to providing a permeable, hydrated, microporous structure and mechanical support. The potential of hyaluronan-based hydrogels has been well established, but the ideal matrix remains to be developed. This study describes the development of hyaluronan sponges-based scaffolds obtained by lysine methyl-ester crosslinking. The reaction conditions are optimized with minimal chemical modifications to obtain materials that closely resemble elements in physiological cellular environments. Three hydrogels with different amounts of crosslinkers were produced that show morphological, water-uptake, mechanical, and stability properties comparable or superior to those of currently available hyaluronan-scaffolds, but with significantly fewer hyaluronan modifications. Primary human chondrocytes cultured with the most promising hydrogel were viable and maintained lineage identity for 3 weeks. They also secreted cartilage-specific matrix proteins. These scaffolds represent promising candidates for cartilage engineering. Copyright © 2017 Elsevier B.V. All rights reserved.

Altering allergenicity of cow's milk by food processing for applications in infant formula.

PubMed

Golkar, Abdolkhalegh; Milani, Jafar M; Vasiljevic, Todor

2018-04-16

Cow's milk-based infant formulas have a long tradition in infant nutrition, although some infants are unable to use them due to presence of several known allergens. Various processing methods have been identified capable of reducing cow's milk protein allergenicity including thermal and non-thermal methods and their combinations. Heat treatment and enzymatic hydrolysis have been in production of hypoallergenic infant formulas. However, modulation of allergenic epitopes depends on the extent of heat treatment applied, which consequently may also reduce a nutritional value of these proteins. In addition, enzymatic hydrolysis may not target allergenic epitopes thus allergenicity may persist; however released peptides may have detrimental impact on taste and functional properties of final products. Modulation of allergenicity of milk proteins appears to require a concerted effort to minimize detrimental effects as clinical studies conducted on commercial hypoallergenic formulas demonstrated persistence of allergic symptoms. This article covers traditional and novel processing methods and their impact on reduction of cow's milk allergenicity in milk-based infant formulas.

Conceptual FOM design tool

NASA Astrophysics Data System (ADS)

Krause, Lee S.; Burns, Carla L.

2000-06-01

This paper discusses the research currently in progress to develop the Conceptual Federation Object Model Design Tool. The objective of the Conceptual FOM (C-FOM) Design Tool effort is to provide domain and subject matter experts, such as scenario developers, with automated support for understanding and utilizing available HLA simulation and other simulation assets during HLA Federation development. The C-FOM Design Tool will import Simulation Object Models from HLA reuse repositories, such as the MSSR, to populate the domain space that will contain all the objects and their supported interactions. In addition, the C-FOM tool will support the conversion of non-HLA legacy models into HLA- compliant models by applying proven abstraction techniques against the legacy models. Domain experts will be able to build scenarios based on the domain objects and interactions in both a text and graphical form and export a minimal FOM. The ability for domain and subject matter experts to effectively access HLA and non-HLA assets is critical to the long-term acceptance of the HLA initiative.

Karyotype Evolution in Birds: From Conventional Staining to Chromosome Painting

PubMed Central

Ferguson-Smith, Malcolm A.

2018-01-01

In the last few decades, there have been great efforts to reconstruct the phylogeny of Neoaves based mainly on DNA sequencing. Despite the importance of karyotype data in phylogenetic studies, especially with the advent of fluorescence in situ hybridization (FISH) techniques using different types of probes, the use of chromosomal data to clarify phylogenetic proposals is still minimal. Additionally, comparative chromosome painting in birds is restricted to a few orders, while in mammals, for example, virtually all orders have already been analyzed using this method. Most reports are based on comparisons using Gallus gallus probes, and only a small number of species have been analyzed with more informative sets of probes, such as those from Leucopternis albicollis and Gyps fulvus, which show ancestral macrochromosomes rearranged in alternative patterns. Despite this, it is appropriate to review the available cytogenetic information and possible phylogenetic conclusions. In this report, the authors gather both classical and molecular cytogenetic data and describe some interesting and unique characteristics of karyotype evolution in birds. PMID:29584697

Microfluidics-assisted in vitro drug screening and carrier production

PubMed Central

Tsui, Jonathan H.; Lee, Woohyuk; Pun, Suzie H.; Kim, Jungkyu; Kim, Deok-Ho

2013-01-01

Microfluidic platforms provide several unique advantages for drug development. In the production of drug carriers, physical properties such as size and shape, and chemical properties such as drug composition and pharmacokinetic parameters, can be modified simply and effectively by tuning the flow rate and geometries. Large numbers of carriers can then be fabricated with minimal effort and with little to no batch-to-batch variation. Additionally, cell or tissue culture models in microfluidic systems can be used as in vitro drug screening tools. Compared to in vivo animal models, microfluidic drug screening platforms allow for high-throughput and reproducible screening at a significantly lower cost, and when combined with current advances in tissue engineering, are also capable of mimicking native tissues. In this review, various microfluidic platforms for drug and gene carrier fabrication are reviewed to provide guidelines for designing appropriate carriers. In vitro microfluidic drug screening platforms designed for high-throughput analysis and replication of in vivo conditions are also reviewed to highlight future directions for drug research and development. PMID:23856409

Automatic Differentiation in Quantum Chemistry with Applications to Fully Variational Hartree-Fock.

PubMed

Tamayo-Mendoza, Teresa; Kreisbeck, Christoph; Lindh, Roland; Aspuru-Guzik, Alán

2018-05-23

Automatic differentiation (AD) is a powerful tool that allows calculating derivatives of implemented algorithms with respect to all of their parameters up to machine precision, without the need to explicitly add any additional functions. Thus, AD has great potential in quantum chemistry, where gradients are omnipresent but also difficult to obtain, and researchers typically spend a considerable amount of time finding suitable analytical forms when implementing derivatives. Here, we demonstrate that AD can be used to compute gradients with respect to any parameter throughout a complete quantum chemistry method. We present DiffiQult , a Hartree-Fock implementation, entirely differentiated with the use of AD tools. DiffiQult is a software package written in plain Python with minimal deviation from standard code which illustrates the capability of AD to save human effort and time in implementations of exact gradients in quantum chemistry. We leverage the obtained gradients to optimize the parameters of one-particle basis sets in the context of the floating Gaussian framework.

Exposure to Unethical Career Events: Effects on Decision-Making, Climate, and Socialization

PubMed Central

Mumford, Michael D.; Waples, Ethan P.; Antes, Alison L.; Murphy, Stephen T.; Connelly, Shane; Brown, Ryan P.; Devenport, Lynn D.

2009-01-01

An implicit goal of many interventions intended to enhance integrity is to minimize peoples’ exposure to unethical events. The intent of the present effort was to examine if exposure to unethical practices in the course of one’s work is related to ethical decision-making. Accordingly, 248 doctoral students in the biological, health, and social sciences were asked to complete a field appropriate measure of ethical decision-making. In addition, they were asked to complete measures examining the perceived acceptability of unethical events and a measure examining perceptions of ethical climate. When these criterion measures were correlated with a measure examining the frequency with which they had been exposed to unethical events in their day-to-day work, it was found that event exposure was strongly related to ethical decision-making, but less strongly related to climate perceptions and perceptions of event acceptability. However, these relationships were moderated by level of experience. The implications of these findings for practices intended to improve ethics are discussed. PMID:19936323

A critical exploration of how English language learners experience nursing education.

PubMed

Mulready-Shick, N

2013-01-01

With nursing education reform calling for greater numbers of graduates from diverse backgrounds, this study explored the experiences of students who identified as English language learners (ELs). Educators may view students from underrepresented groups at the margins of nursing education. Minimal research on the experiences of students identifying as ELs exists. Interpretive phenomenological and critical methodologies were used to explore students' lived experiences in the nursing classroom. Academic progress involved additional time and effort dedicated to learning English and the languages of health care and nursing. Traditional and monocultural pedagogical practices, representing acts of power and dominance, thwarted learning. Yet students made progress despite less effective pedagogical practices and socioeconomic realities. This inquiry began with one notion of identity, "English-learners," but evolved to students' perceptions of "being-in-the-world," wholeness, and future endeavors. This study counters the dominant view that students without a greater command of English are not ready for the rigors of nursing education.

Towards practical control design using neural computation

NASA Technical Reports Server (NTRS)

Troudet, Terry; Garg, Sanjay; Mattern, Duane; Merrill, Walter

1991-01-01

The objective is to develop neural network based control design techniques which address the issue of performance/control effort tradeoff. Additionally, the control design needs to address the important issue if achieving adequate performance in the presence of actuator nonlinearities such as position and rate limits. These issues are discussed using the example of aircraft flight control. Given a set of pilot input commands, a feedforward net is trained to control the vehicle within the constraints imposed by the actuators. This is achieved by minimizing an objective function which is the sum of the tracking errors, control input rates and control input deflections. A tradeoff between tracking performance and control smoothness is obtained by varying, adaptively, the weights of the objective function. The neurocontroller performance is evaluated in the presence of actuator dynamics using a simulation of the vehicle. Appropriate selection of the different weights in the objective function resulted in the good tracking of the pilot commands and smooth neurocontrol. An extension of the neurocontroller design approach is proposed to enhance its practicality.

Adapting existing natural language processing resources for cardiovascular risk factors identification in clinical notes.

PubMed

Khalifa, Abdulrahman; Meystre, Stéphane

2015-12-01

The 2014 i2b2 natural language processing shared task focused on identifying cardiovascular risk factors such as high blood pressure, high cholesterol levels, obesity and smoking status among other factors found in health records of diabetic patients. In addition, the task involved detecting medications, and time information associated with the extracted data. This paper presents the development and evaluation of a natural language processing (NLP) application conceived for this i2b2 shared task. For increased efficiency, the application main components were adapted from two existing NLP tools implemented in the Apache UIMA framework: Textractor (for dictionary-based lookup) and cTAKES (for preprocessing and smoking status detection). The application achieved a final (micro-averaged) F1-measure of 87.5% on the final evaluation test set. Our attempt was mostly based on existing tools adapted with minimal changes and allowed for satisfying performance with limited development efforts. Copyright © 2015 Elsevier Inc. All rights reserved.

Challenges with minimising mercury pollution in the small-scale gold mining sector: experiences from the Guianas.

PubMed

Hilson, Gavin; Vieira, Rickford

2007-12-01

This paper examines the barriers to mitigating mercury pollution at small-scale gold mines in the Guianas (Guyana, French Guiana and Suriname), and prescribes recommendations for overcoming these obstacles. Whilst considerable attention has been paid to analysing the environmental impacts of operations in the region, minimal research has been undertaken to identify appropriate policy and educational initiatives for addressing the mounting mercury problem. Findings from recent fieldwork and selected interviews with operators from Guyanese and Surinamese gold mining regions reveal that legislative incapacity, the region's varied industry policy stances, various technological problems, and low environmental awareness on the part of communities are impeding efforts to facilitate improved mercury management at small-scale gold mines in the Guianas. Marked improvements can be achieved, however, if legislation, particularly that pertaining to mercury, is harmonised in the region; educational seminars continue to be held in important mining districts; and additional outlets for disseminating environmental equipment and mercury-free technologies are provided.

Parallelization of NAS Benchmarks for Shared Memory Multiprocessors

NASA Technical Reports Server (NTRS)

Waheed, Abdul; Yan, Jerry C.; Saini, Subhash (Technical Monitor)

1998-01-01

This paper presents our experiences of parallelizing the sequential implementation of NAS benchmarks using compiler directives on SGI Origin2000 distributed shared memory (DSM) system. Porting existing applications to new high performance parallel and distributed computing platforms is a challenging task. Ideally, a user develops a sequential version of the application, leaving the task of porting to new generations of high performance computing systems to parallelization tools and compilers. Due to the simplicity of programming shared-memory multiprocessors, compiler developers have provided various facilities to allow the users to exploit parallelism. Native compilers on SGI Origin2000 support multiprocessing directives to allow users to exploit loop-level parallelism in their programs. Additionally, supporting tools can accomplish this process automatically and present the results of parallelization to the users. We experimented with these compiler directives and supporting tools by parallelizing sequential implementation of NAS benchmarks. Results reported in this paper indicate that with minimal effort, the performance gain is comparable with the hand-parallelized, carefully optimized, message-passing implementations of the same benchmarks.

The use of extrapolation concepts to augment the Frequency Separation Technique

NASA Astrophysics Data System (ADS)

Alexiou, Spiros

2015-03-01

The Frequency Separation Technique (FST) is a general method formulated to improve the speed and/or accuracy of lineshape calculations, including strong overlapping collisions, as is the case for ion dynamics. It should be most useful when combined with ultrafast methods, that, however have significant difficulties when the impact regime is approached. These difficulties are addressed by the Frequency Separation Technique, in which the impact limit is correctly recovered. The present work examines the possibility of combining the Frequency Separation Technique with the addition of extrapolation to improve results and minimize errors resulting from the neglect of fast-slow coupling and thus obtain the exact result with a minimum of extra effort. To this end the adequacy of one such ultrafast method, the Frequency Fluctuation Method (FFM) for treating the nonimpact part is examined. It is found that although the FFM is unable to reproduce the nonimpact profile correctly, its coupling with the FST correctly reproduces the total profile.

Systems engineering and integration: Advanced avionics laboratories

NASA Technical Reports Server (NTRS)

1990-01-01

In order to develop the new generation of avionics which will be necessary for upcoming programs such as the Lunar/Mars Initiative, Advanced Launch System, and the National Aerospace Plane, new Advanced Avionics Laboratories are required. To minimize costs and maximize benefits, these laboratories should be capable of supporting multiple avionics development efforts at a single location, and should be of a common design to support and encourage data sharing. Recent technological advances provide the capability of letting the designer or analyst perform simulations and testing in an environment similar to his engineering environment and these features should be incorporated into the new laboratories. Existing and emerging hardware and software standards must be incorporated wherever possible to provide additional cost savings and compatibility. Special care must be taken to design the laboratories such that real-time hardware-in-the-loop performance is not sacrificed in the pursuit of these goals. A special program-independent funding source should be identified for the development of Advanced Avionics Laboratories as resources supporting a wide range of upcoming NASA programs.

Condition, innate immunity and disease mortality of inbred crows

PubMed Central

Townsend, Andrea K.; Clark, Anne B.; McGowan, Kevin J.; Miller, Andrew D.; Buckles, Elizabeth L.

2010-01-01

Cooperatively breeding American crows (Corvus brachyrhynchos) suffer a severe disease-mediated survival cost from inbreeding, but the proximate mechanisms linking inbreeding to disease are unknown. Here, we examine indices of nestling body condition and innate immunocompetence in relationship to inbreeding and disease mortality. Using an estimate of microsatellite heterozygosity that predicts inbreeding in this population, we show that inbred crows were in relatively poor condition as nestlings, and that body condition index measured in the first 2–33 days after hatching, in addition to inbreeding index, predicted disease probability in the first 34 months of life. Inbred nestlings also mounted a weaker response along one axis of innate immunity: the proportion of bacteria killed in a microbiocidal assay increased as heterozygosity index increased. Relatively poor body condition and low innate immunocompetence are two mechanisms that might predispose inbred crows to ultimate disease mortality. A better understanding of condition-mediated inbreeding depression can guide efforts to minimize disease costs of inbreeding in small populations. PMID:20444716

Preflight Adaptation Training for Spatial Orientation and Space Motion Sickness

NASA Technical Reports Server (NTRS)

Harm, Deborah L.; Parker, Donald E.

1994-01-01

Two part-task preflight adaptation trainers (PATs) are being developed at the NASA Johnson Space Center to preadapt astronauts to novel sensory stimulus conditions similar to those present in microgravity to facilitate adaptation to microgravity and readaptation to Earth. This activity is a major component of a general effort to develop countermeasures aimed at minimizing sensory and sensorimotor disturbances and Space Motion Sickness (SMS) associated with adaptation to microgravity and readaptation to Earth. Design principles for the development of the two trainers are discussed, along with a detailed description of both devices. In addition, a summary of four ground-based investigations using one of the trainers to determine the extent to which various novel sensory stimulus conditions produce changes in compensatory eye movement responses, postural equilibrium, motion sickness symptoms, and electrogastric responses are presented. Finally, a brief description of the general concept of dual-adopted states that underly the development of the PATs, and ongoing and future operational and basic research activities are presented.

Self-audit of lockout/tagout in manufacturing workplaces: A pilot study.

PubMed

Yamin, Samuel C; Parker, David L; Xi, Min; Stanley, Rodney

2017-05-01

Occupational health and safety (OHS) self-auditing is a common practice in industrial workplaces. However, few audit instruments have been tested for inter-rater reliability and accuracy. A lockout/tagout (LOTO) self-audit checklist was developed for use in manufacturing enterprises. It was tested for inter-rater reliability and accuracy using responses of business self-auditors and external auditors. Inter-rater reliability at ten businesses was excellent (κ = 0.84). Business self-auditors had high (100%) accuracy in identifying elements of LOTO practice that were present as well those that were absent (81% accuracy). Reliability and accuracy increased further when problematic checklist questions were removed from the analysis. Results indicate that the LOTO self-audit checklist would be useful in manufacturing firms' efforts to assess and improve their LOTO programs. In addition, a reliable self-audit instrument removes the need for external auditors to visit worksites, thereby expanding capacity for outreach and intervention while minimizing costs. © 2017 Wiley Periodicals, Inc.

Karyotype Evolution in Birds: From Conventional Staining to Chromosome Painting.

PubMed

Kretschmer, Rafael; Ferguson-Smith, Malcolm A; de Oliveira, Edivaldo Herculano Correa

2018-03-27

In the last few decades, there have been great efforts to reconstruct the phylogeny of Neoaves based mainly on DNA sequencing. Despite the importance of karyotype data in phylogenetic studies, especially with the advent of fluorescence in situ hybridization (FISH) techniques using different types of probes, the use of chromosomal data to clarify phylogenetic proposals is still minimal. Additionally, comparative chromosome painting in birds is restricted to a few orders, while in mammals, for example, virtually all orders have already been analyzed using this method. Most reports are based on comparisons using Gallus gallus probes, and only a small number of species have been analyzed with more informative sets of probes, such as those from Leucopternis albicollis and Gyps fulvus , which show ancestral macrochromosomes rearranged in alternative patterns. Despite this, it is appropriate to review the available cytogenetic information and possible phylogenetic conclusions. In this report, the authors gather both classical and molecular cytogenetic data and describe some interesting and unique characteristics of karyotype evolution in birds.

The IRAF Fabry-Perot analysis package: Ring fitting

NASA Technical Reports Server (NTRS)

Shopbell, P. L.; Bland-Hawthorn, J.; Cecil, G.

1992-01-01

As introduced at ADASSI, a Fabry-Perot analysis package for IRAF is currently under development as a joint effort of ourselves and Frank Valdes of the IRAF group. Although additional portions of the package were also implemented, we report primarily on the development of a robust ring fitting task, useful for fitting the calibration rings obtained in Fabry-Perot observations. The general equation of an ellipse is fit to the shape of the rings, providing information on ring center, ellipticity, and position angle. Such parameters provide valuable information on the wavelength response of the etalon and the geometric stability of the system. Appropriate statistical weighting is applied to the pixels to account for increasing numbers with radius, the Lorentzian cross-section, and uneven illumination. The major problems of incomplete, non-uniform, and multiple rings are addressed with the final task capable of fitting rings regardless of center, cross-section, or completion. The task requires only minimal user intervention, allowing large numbers of rings to be fit in an extremely automated manner.

Exposure to Unethical Career Events: Effects on Decision-Making, Climate, and Socialization.

PubMed

Mumford, Michael D; Waples, Ethan P; Antes, Alison L; Murphy, Stephen T; Connelly, Shane; Brown, Ryan P; Devenport, Lynn D

2009-09-01

An implicit goal of many interventions intended to enhance integrity is to minimize peoples' exposure to unethical events. The intent of the present effort was to examine if exposure to unethical practices in the course of one's work is related to ethical decision-making. Accordingly, 248 doctoral students in the biological, health, and social sciences were asked to complete a field appropriate measure of ethical decision-making. In addition, they were asked to complete measures examining the perceived acceptability of unethical events and a measure examining perceptions of ethical climate. When these criterion measures were correlated with a measure examining the frequency with which they had been exposed to unethical events in their day-to-day work, it was found that event exposure was strongly related to ethical decision-making, but less strongly related to climate perceptions and perceptions of event acceptability. However, these relationships were moderated by level of experience. The implications of these findings for practices intended to improve ethics are discussed.

Hydroperoxide Traces in Common Cyclic Ethers as Initiators for Controlled RAFT Polymerizations.

PubMed

Eggers, Steffen; Abetz, Volker

2018-04-01

Herein, a reversible addition-fragmentation chain transfer (RAFT) polymerization is introduced for reactive monomers like N-acryloylpyrrolidine or N,N-dimethylacrylamide working without a conventional radical initiator. As a very straightforward proof of principle, the method takes advantage of the usually inconvenient radical-generating hydroperoxide contaminations in cyclic ethers like tetrahydrofuran or 1,4-dioxane, which are very common solvents in polymer sciences. The polymerizations are surprisingly well controlled and the polymers can be extended with a second block, indicating their high livingness. "Solvent-initiated" RAFT polymerizations hence prove to be a feasible access to tailored materials with minimal experimental effort and standard laboratory equipment, only requiring the following ingredients: hydroperoxide-contaminated solvent, monomer, and RAFT agent. In other respects, however, the potential coinitiating ability of the used solvent is to be considered when investigating the kinetics of RAFT polymerizations or aiming for the synthesis of high-livingness polymers, e.g., multiblock copolymers. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Automatic Differentiation in Quantum Chemistry with Applications to Fully Variational Hartree–Fock

PubMed Central

2018-01-01

Automatic differentiation (AD) is a powerful tool that allows calculating derivatives of implemented algorithms with respect to all of their parameters up to machine precision, without the need to explicitly add any additional functions. Thus, AD has great potential in quantum chemistry, where gradients are omnipresent but also difficult to obtain, and researchers typically spend a considerable amount of time finding suitable analytical forms when implementing derivatives. Here, we demonstrate that AD can be used to compute gradients with respect to any parameter throughout a complete quantum chemistry method. We present DiffiQult, a Hartree–Fock implementation, entirely differentiated with the use of AD tools. DiffiQult is a software package written in plain Python with minimal deviation from standard code which illustrates the capability of AD to save human effort and time in implementations of exact gradients in quantum chemistry. We leverage the obtained gradients to optimize the parameters of one-particle basis sets in the context of the floating Gaussian framework.

EPA issues interim final waste minimization guidance

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bergeson, L.L.

1993-08-01

The U.S. Environmental Protection Agency (EPA) has released a new and detailed interim final guidance to assist hazardous waste generators in certifying they have a waste minimization program in place under the Resource Conservation and Recovery Act (RCRA). EPA's guidance identifies the basic elements of a waste minimization program in place that, if present, will allow people to certify they have implemented a program to reduce the volume and toxicity of hazardous waste to the extent economically practical. The guidance is directly applicable to generators of 1000 or more kilograms per month of hazardous waste, or large-quantity generators, and tomore » owners and operators of hazardous waste treatment, storage or disposal facilities who manage their own hazardous waste on site. Small-quantity generators that generate more than 100 kilograms, but less than 1,000 kilograms, per month of hazardous waste are not subject to the same program in place certification requirement. Rather, they must certify on their manifests that they have made a good faith effort to minimize their waste generation.« less

Does Minimally Invasive Spine Surgery Minimize Surgical Site Infections?

PubMed

Kulkarni, Arvind Gopalrao; Patel, Ravish Shammi; Dutta, Shumayou

2016-12-01

Retrospective review of prospectively collected data. To evaluate the incidence of surgical site infections (SSIs) in minimally invasive spine surgery (MISS) in a cohort of patients and compare with available historical data on SSI in open spinal surgery cohorts, and to evaluate additional direct costs incurred due to SSI. SSI can lead to prolonged antibiotic therapy, extended hospitalization, repeated operations, and implant removal. Small incisions and minimal dissection intrinsic to MISS may minimize the risk of postoperative infections. However, there is a dearth of literature on infections after MISS and their additional direct financial implications. All patients from January 2007 to January 2015 undergoing posterior spinal surgery with tubular retractor system and microscope in our institution were included. The procedures performed included tubular discectomies, tubular decompressions for spinal stenosis and minimal invasive transforaminal lumbar interbody fusion (TLIF). The incidence of postoperative SSI was calculated and compared to the range of cited SSI rates from published studies. Direct costs were calculated from medical billing for index cases and for patients with SSI. A total of 1,043 patients underwent 763 noninstrumented surgeries (discectomies, decompressions) and 280 instrumented (TLIF) procedures. The mean age was 52.2 years with male:female ratio of 1.08:1. Three infections were encountered with fusion surgeries (mean detection time, 7 days). All three required wound wash and debridement with one patient requiring unilateral implant removal. Additional direct cost due to infection was $2,678 per 100 MISS-TLIF. SSI increased hospital expenditure per patient 1.5-fold after instrumented MISS. Overall infection rate after MISS was 0.29%, with SSI rate of 0% in non-instrumented MISS and 1.07% with instrumented MISS. MISS can markedly reduce the SSI rate and can be an effective tool to minimize hospital costs.

Investigating Grit Variables and Their Relations with Practice and Skill Groups in Developing Sport Experts

ERIC Educational Resources Information Center

Tedesqui, Rafael A. B.; Young, Bradley W.

2017-01-01

Grit, the tendency to work hard toward long-term goals, maintaining effort and interest over years despite failure and adversity, has predicted several achievement outcomes. However, minimal work has examined grit within a sport expertise development framework, and specifically its association with deliberate practice (DP) in sport. Participants,…

An Exploration of the Adoption of Public Health Degrees and Certificates in Community Colleges

ERIC Educational Resources Information Center

Kirkwood, Brenda A.

2012-01-01

Efforts aimed at strengthening the governmental public health workforce have led to increased attention on undergraduate public health education. The focus, to date, has been on four-year institutions with minimal attention provided to community, or two-year, colleges and their potential role in addressing public health workforce needs. Progress…

Predictive Cache Modeling and Analysis

DTIC Science & Technology

2011-11-01

metaheuristic /bin-packing algorithm to optimize task placement based on task communication characterization. Our previous work on task allocation showed...Cache Miss Minimization Technology To efficiently explore combinations and discover nearly-optimal task-assignment algorithms , we extended to our...it was possible to use our algorithmic techniques to decrease network bandwidth consumption by ~25%. In this effort, we adapted these existing

Influence of mineral nutrition on susceptibility and recovery of planted seedlings of ungulate browse

Treesearch

Owen T. Burney; Douglass F. Jacobs

2010-01-01

Efforts to minimize animal damage during reforestation in the Oregon Coast Range have had little success. Enhancing plant mineral nutrition via application of controlled-release fertilization at the time of planting may provide some relief from ungulate browse pressure due to increased height growth, but associated impacts on susceptibility of fertilized plants to...

Professional Constraints: How Our Narrow Professional Alliance Has Stymied Leisure Studies

ERIC Educational Resources Information Center

Samdahl, Diane M.

2016-01-01

Noting that our field is minimally relevant to the multitude of ways the American public is engaged in leisure and recreation, Samdahl delves into our history in attempt to understand how this came about. She notes that the recreation movement as canonized in our textbooks ignores parallel efforts that led to community theaters, libraries, and…

The Other Side of Method Bias: The Perils of Distinct Source Research Designs

ERIC Educational Resources Information Center

Kammeyer-Mueller, John; Steel, Piers D. G.; Rubenstein, Alex

2010-01-01

Common source bias has been the focus of much attention. To minimize the problem, researchers have sometimes been advised to take measurements of predictors from one observer and measurements of outcomes from another observer or to use separate occasions of measurement. We propose that these efforts to eliminate biases due to common source…

Teaching Transgressive Representations of LGBTQ People in Educator Preparation: Is Conformity Required for Inclusion?

ERIC Educational Resources Information Center

Jennings, Todd

2015-01-01

One strategy used to teach about diverse populations is to edit their curricular representations to minimize their transgressive nature in an effort to gain more acceptance among students. This article explores the implications of these assimilationist narratives when used in educator preparation programs to represent LGBTQ people. It examines the…

Autumn monitoring of resident avifauna on Guana Island, British Virgin Islands

Treesearch

C.W. Boal; J.M. Wunderle Jr.; W.J. Arendt

2013-01-01

Although the Caribbean region is considered a biodiversity hotspot and a priority for ecological conservation efforts, little information exists on population trends of West Indian landbirds. We combined avian survey data collected from three studies spanning a 16-year period on a small island with a minimal human presence in the British Virgin Islands. Although...

Online Classes See Cheating Go High-Tech

ERIC Educational Resources Information Center

Young, Jeffrey R.

2012-01-01

Easy A's may be even easier to score these days, with the growing popularity of online courses. Tech-savvy students are finding ways to cheat that let them ace online courses with minimal effort, in ways that are difficult to detect. The issue of online cheating may rise in prominence, as more and more institutions embrace online courses, and as…

Going Green: The Power of the Individual

ERIC Educational Resources Information Center

Neugebauer, Adam

2009-01-01

In this article, the author describes wasteful office practices he encountered at work such as minimal recycling efforts, computer equipment being left on at night, kitchens were stocked with disposable items, and others. What really bothered him was that no matter how passionate he was about trying to reduce his own "footprint" at work, it wasn't…

School Leadership Challenges along Kenya's Borabu-Sotik Border

ERIC Educational Resources Information Center

Abaya, Joel

2016-01-01

This article is based on a qualitative multi-case study carried out in southwestern Kenya along the border areas of Nyanza and Rift Valley province. The purpose of the research was to examine the challenges public secondary school principals faced in their leadership roles and suggest efforts they might adopt to minimize the effects of these…

FORUM: Instructional Communication and Millennial Students: Millennial Students in the College Classroom: Adjusting to Academic Entitlement

ERIC Educational Resources Information Center

Goldman, Zachary W.; Martin, Matthew M.

2016-01-01

Academic entitlement (AE) refers to the expectation of educational success despite the input of personal effort needed to earn it (Boswell, 2012). Entitled students feel that learning should require minimal work and that difficulties encountered during the learning process should be attributed to instructors, rather than themselves. AE has become…

Aerial Detection, Ground Evaluation, and Monitoring of the Southern Pine Beetle: State Perspectives

Treesearch

Ronald F. Billings

2011-01-01

The southern pine beetle (SPB), is recognized as the most serious insect pest of southern pine forests. Outbreaks occur almost every year somewhere within its wide range, requiring intensive suppression efforts to minimize resource losses to Federal, State, and private forests. Effective management involves annual monitoring of SPB populations and aerial detection and...

Factors affecting the use of increment cores to assess fixation

Treesearch

Stan T. Lebow

2001-01-01

As part of an effort to ensure that treated wood products have minimal environmental and handling concerns, an American Wood Preservers Association task force is considering the development of a test to assess the degree of fixation of Waterborne wood preservatives. The proposed test involves removal and leaching of increment cores. This paper describes a laboratory...

Reduction of Potential Fire Behavior in Wildland-urban Interface Communities in Southern California: A Collaborative Approach

Treesearch

Christopher A. Dicus; Michael E. Scott

2006-01-01

This manuscript details a collaborative effort that reduced the risk of wildfire in an affluent, wildland-urban interface community in southern California while simultaneously minimizing the environmental impact to the site. FARSITE simulations illustrated the potential threat to the community of Rancho Santa Fe in San Diego County, California, where multimillion-...

Desert Survivors: The Design and Implementation of a Television Program to Enhance Local Scientific Literacy

ERIC Educational Resources Information Center

Utz, Jenifer C.; Rausch, Candice M.; Fruth, Laurie; Thomas, Megan E.; van Breukelen, Frank

2007-01-01

Outreach efforts by faculty members are oftentimes limited in scope due to hectic schedules. We developed a program to enhance science literacy in elementary school children that allows experts to reach a tremendous audience while minimizing their time commitment. The foundation of the program is a television series entitled "Desert Survivors."…

Can We Protect Our Communities from Natural Disasters?

ERIC Educational Resources Information Center

Robertson, William C.

2010-01-01

There are two ways one might protect communities from natural disasters. One is to minimize the damage from disasters, and the other is to prevent the disasters in the first place. However, preventing disasters is another matter, and in trying to do so, we have to be aware of unintended consequences of our efforts. To address the issues associated…

What's in a Prerequisite? A Mixed-Methods Approach to Identifying the Impact of a Prerequisite Course

ERIC Educational Resources Information Center

Sato, Brian K.; Lee, Amanda K.; Alam, Usman; Dang, Jennifer V.; Dacanay, Samantha J.; Morgado, Pedro; Pirino, Giorgia; Brunner, Jo Ellen; Castillo, Leanne A.; Chan, Valerie W.; Sandholtz, Judith H.

2017-01-01

Despite the ubiquity of prerequisites in undergraduate science, technology, engineering, and mathematics curricula, there has been minimal effort to assess their value in a data-driven manner. Using both quantitative and qualitative data, we examined the impact of prerequisites in the context of a microbiology lecture and lab course pairing.…

Using the Community Readiness Model in Native Communities.

ERIC Educational Resources Information Center

Jumper-Thurman, Pamela; Plested, Barbara A.; Edwards, Ruth W.; Helm, Heather M.; Oetting, Eugene R.

The effects of alcohol and other drug abuse are recognized as a serious problem in U.S. communities. Policy efforts and increased law enforcement have only a minimal impact if prevention strategies are not consistent with the community's level of readiness, are not culturally relevant, and are not community-specific. A model has been developed for…

Educator "What-Ifs": The Feasibility of Choice Making in the Classroom

ERIC Educational Resources Information Center

Jolivette, Kristine; Parks Ennis, Robin; Swoszowski, Nicole Cain

2017-01-01

Educators who work with students with emotional and behavioral disorders may seek instructional strategies that are effective yet practical in the classroom. These strategies need a research base to support them and minimal time and/or effort to prepare or implement. One research-based option for educators across a variety of contexts is…

A Comparison Study of Return Ratio-Based Academic Enrollment Forecasting Models. Professional File. Article 129, Spring 2013

ERIC Educational Resources Information Center

Zan, Xinxing Anna; Yoon, Sang Won; Khasawneh, Mohammad; Srihari, Krishnaswami

2013-01-01

In an effort to develop a low-cost and user-friendly forecasting model to minimize forecasting error, we have applied average and exponentially weighted return ratios to project undergraduate student enrollment. We tested the proposed forecasting models with different sets of historical enrollment data, such as university-, school-, and…

Fruit and Vegetable Intake and Obesity in Preadolescent Children: The Role of Neighborhood Poverty and Grocery Store Access

ERIC Educational Resources Information Center

Mushi-Brunt, Christina; Haire-Joshu, Debra; Elliott, Michael; Brownson, Ross

2007-01-01

Background: The prevalence of obesity among children continues to rise. Individual-focused health education efforts have been minimally successful in producing the necessary changes to curb this epidemic. Purpose: The purpose of this study was to examine the relationships between neighborhood characteristics, grocery store availability and…

Recommendations for Constructing School Nurses' Offices Designed to Support School Health Services

ERIC Educational Resources Information Center

McKibben, Cynthia S.; DiPaolo, Sonja J.; Bennett, J. Scott

2005-01-01

When attempting to locate guidelines for designing school nurses' offices, one finds there are minimal resources that address this need. In an effort to solve this concern, the authors were instrumental in writing an article for "The Journal of School Nursing" published in April 1997. The current article is an updated perspective that defines…

From a social marketing perspective: a proposed customer relationship management technology transfer model

Treesearch

Delton Alderman; Kent Nakamoto; David Briberg

2007-01-01

Technology and knowledge transfer (TKT) is practiced for a plethora of causes, ranging from AIDS prevention to manufacturing competitiveness. The number of government, university, and association TKT efforts is exhausting and fraught with problems; we know anecdotally that the adoption of technology or knowledge is minimal across all contexts. There are a myriad of...

Efforts To End Fraternity Hazing Have Largely Failed, Critics Charge.

ERIC Educational Resources Information Center

Gose, Ben

1997-01-01

While college and university officials tend to say they have fraternity hazing under control due to school policies and state criminal laws, critics find the laws have been ineffective, in part because of a tendency to blame the victims. Punishment of some student perpetrators has been minimal. Liability of schools can be substantial, with…

The Child-Centered Social Worker and the Sexually Abused Child: Pathway to Healing.

ERIC Educational Resources Information Center

Anderson, Lorie Elizabeth; Weston, Elisabeth A.; Doueck, Howard J.; Krause, Denise J.

2002-01-01

In an effort to assist the sexually abused child throughout the court process, the authors propose the concept of a child-centered social worker committed to minimizing the potential for system-induced trauma by assisting the sexually abused child through the judicial process and providing clinical treatment as well. (Contains 68 references.) (GCP)

Space shuttle low cost/risk avionics study

NASA Technical Reports Server (NTRS)

1971-01-01

All work breakdown structure elements containing any avionics related effort were examined for pricing the life cycle costs. The analytical, testing, and integration efforts are included for the basic onboard avionics and electrical power systems. The design and procurement of special test equipment and maintenance and repair equipment are considered. Program management associated with these efforts is described. Flight test spares and labor and materials associated with the operations and maintenance of the avionics systems throughout the horizontal flight test are examined. It was determined that cost savings can be achieved by using existing hardware, maximizing orbiter-booster commonality, specifying new equipments to MIL quality standards, basing redundancy on cost effective analysis, minimizing software complexity and reducing cross strapping and computer-managed functions, utilizing compilers and floating point computers, and evolving the design as dictated by the horizontal flight test schedules.

Image-based ranging and guidance for rotorcraft

NASA Technical Reports Server (NTRS)

Menon, P. K. A.

1991-01-01

This report documents the research carried out under NASA Cooperative Agreement No. NCC2-575 during the period Oct. 1988 - Dec. 1991. Primary emphasis of this effort was on the development of vision based navigation methods for rotorcraft nap-of-the-earth flight regime. A family of field-based ranging algorithms were developed during this research period. These ranging schemes are capable of handling both stereo and motion image sequences, and permits both translational and rotational camera motion. The algorithms require minimal computational effort and appear to be implementable in real time. A series of papers were presented on these ranging schemes, some of which are included in this report. A small part of the research effort was expended on synthesizing a rotorcraft guidance law that directly uses the vision-based ranging data. This work is discussed in the last section.

Past, Present, and Future of Minimally Invasive Abdominal Surgery

PubMed Central

Antoniou, George A.; Antoniou, Athanasios I.; Granderath, Frank-Alexander

2015-01-01

Laparoscopic surgery has generated a revolution in operative medicine during the past few decades. Although strongly criticized during its early years, minimization of surgical trauma and the benefits of minimization to the patient have been brought to our attention through the efforts and vision of a few pioneers in the recent history of medicine. The German gynecologist Kurt Semm (1927–2003) transformed the use of laparoscopy for diagnostic purposes into a modern therapeutic surgical concept, having performed the first laparoscopic appendectomy, inspiring Erich Mühe and many other surgeons around the world to perform a wide spectrum of procedures by minimally invasive means. Laparoscopic cholecystectomy soon became the gold standard, and various laparoscopic procedures are now preferred over open approaches, in the light of emerging evidence that demonstrates less operative stress, reduced pain, and shorter convalescence. Natural orifice transluminal endoscopic surgery (NOTES) and single-incision laparoscopic surgery (SILS) may be considered further steps toward minimization of surgical trauma, although these methods have not yet been standardized. Laparoscopic surgery with the use of a robotic platform constitutes a promising field of investigation. New technologies are to be considered under the prism of the history of surgery; they seem to be a step toward further minimization of surgical trauma, but not definite therapeutic modalities. Patient safety and medical ethics must be the cornerstone of future investigation and implementation of new techniques. PMID:26508823

Characterization of the Environmentally Induced Chemical Transformations of Uranium Tetrafluoride

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wellons, M.

A key challenge with nuclear safeguards environmental sampling is identification of the materials post release due to subsequent chemical reactions with ambient water and oxygen. Uranium Tetrafluoride (UF4) is of interest as an intermediate in both the upstream and downstream portions of uranium feedstock and metal production processes used in nuclear fuel production; however minimal published research exists relating to UF4 hydrolysis. FY16 efforts were dedicated to in-situ Raman spectroscopy and X-ray diffraction characterization of UF4 during exposure to various relative humidity conditions. This effort mapped several hydrolysis reaction pathways and identified both intermediate, and terminal progeny species.

Design of optimally normal minimum gain controllers by continuation method

NASA Technical Reports Server (NTRS)

Lim, K. B.; Juang, J.-N.; Kim, Z. C.

1989-01-01

A measure of the departure from normality is investigated for system robustness. An attractive feature of the normality index is its simplicity for pole placement designs. To allow a tradeoff between system robustness and control effort, a cost function consisting of the sum of a norm of weighted gain matrix and a normality index is minimized. First- and second-order necessary conditions for the constrained optimization problem are derived and solved by a Newton-Raphson algorithm imbedded into a one-parameter family of neighboring zero problems. The method presented allows the direct computation of optimal gains in terms of robustness and control effort for pole placement problems.

Development of TPS flight test and operational instrumentation

NASA Technical Reports Server (NTRS)

Carnahan, K. R.; Hartman, G. J.; Neuner, G. J.

1975-01-01

Thermal and flow sensor instrumentation was developed for use as an integral part of the space shuttle orbiter reusable thermal protection system. The effort was performed in three tasks: a study to determine the optimum instruments and instrument installations for the space shuttle orbiter RSI and RCC TPS; tests and/or analysis to determine the instrument installations to minimize measurement errors; and analysis using data from the test program for comparison to analytical methods. A detailed review of existing state of the art instrumentation in industry was performed to determine the baseline for the departure of the research effort. From this information, detailed criteria for thermal protection system instrumentation were developed.

Nanosensors and nanomaterials for monitoring glucose in diabetes

PubMed Central

Cash, Kevin J.; Clark, Heather A.

2010-01-01

Worldwide, diabetes is a rapidly growing problem that is managed at the individual level by monitoring and controlling blood glucose levels to minimize the negative effects of the disease. Because of limitations in diagnostic methods, significant research efforts are focused on developing improved methods to measure glucose. Nanotechnology has impacted these efforts by increasing the surface area of sensors, improving the catalytic properties of electrodes and providing nanoscale sensors. Herein, we discuss developments in the past several years on both nanosensors that directly measure glucose as well as nanomaterials that improve glucose sensor function. Finally, we discuss challenges that must be overcome to apply these developments in the clinic. PMID:20869318

Additive Manufacturing Modeling and Simulation A Literature Review for Electron Beam Free Form Fabrication

NASA Technical Reports Server (NTRS)

Seufzer, William J.

2014-01-01

Additive manufacturing is coming into industrial use and has several desirable attributes. Control of the deposition remains a complex challenge, and so this literature review was initiated to capture current modeling efforts in the field of additive manufacturing. This paper summarizes about 10 years of modeling and simulation related to both welding and additive manufacturing. The goals were to learn who is doing what in modeling and simulation, to summarize various approaches taken to create models, and to identify research gaps. Later sections in the report summarize implications for closed-loop-control of the process, implications for local research efforts, and implications for local modeling efforts.

WASTE MINIMIZATION AUDIT REPORT: CASE STUDIES OF MINIMIZATION OF SOLVENT WASTES AND ELECTROPLATING WASTES AT A DOD (DEPARTMENT OF DEFENSE) INSTALLATION

EPA Science Inventory

The report results of a waste minimization audit carried out in 1987 at a tank reconditioning facility operated by the DOD. The audit team developed recommendations for reducing the generation FOO6 wastewater treatment sludge, and FOO2, and FOO4 solvent wastes. In addition to det...

Expert elicitation, uncertainty, and the value of information in controlling invasive species

USGS Publications Warehouse

Johnson, Fred A.; Smith, Brian J.; Bonneau, Mathieu; Martin, Julien; Romagosa, Christina; Mazzotti, Frank J.; Waddle, J. Hardin; Reed, Robert; Eckles, Jennifer Kettevrlin; Vitt, Laurie J.

2017-01-01

We illustrate the utility of expert elicitation, explicit recognition of uncertainty, and the value of information for directing management and research efforts for invasive species, using tegu lizards (Salvator merianae) in southern Florida as a case study. We posited a post-birth pulse, matrix model in which four age classes of tegus are recognized: hatchlings, 1 year-old, 2 year-olds, and 3 + year-olds. This matrix model was parameterized using a 3-point process to elicit estimates of tegu demographic rates in southern Florida from 10 herpetology experts. We fit statistical distributions for each parameter and for each expert, then drew and pooled a large number of replicate samples from these to form a distribution for each demographic parameter. Using these distributions, as well as the observed correlations among elicited values, we generated a large sample of matrix population models to infer how the tegu population would respond to control efforts. We used the concepts of Pareto efficiency and stochastic dominance to conclude that targeting older age classes at relatively high rates appears to have the best chance of minimizing tegu abundance and control costs. We conclude that expert opinion combined with an explicit consideration of uncertainty can be valuable in conducting an initial assessment of what control strategy, effort, and monetary resources are needed to reduce and eventually eliminate the invader. Scientists, in turn, can use the value of information to focus research in a way that not only increases the efficacy of control, but minimizes costs as well.

Strategy of arm movement control is determined by minimization of neural effort for joint coordination.

PubMed

Dounskaia, Natalia; Shimansky, Yury

2016-06-01

Optimality criteria underlying organization of arm movements are often validated by testing their ability to adequately predict hand trajectories. However, kinematic redundancy of the arm allows production of the same hand trajectory through different joint coordination patterns. We therefore consider movement optimality at the level of joint coordination patterns. A review of studies of multi-joint movement control suggests that a 'trailing' pattern of joint control is consistently observed during which a single ('leading') joint is rotated actively and interaction torque produced by this joint is the primary contributor to the motion of the other ('trailing') joints. A tendency to use the trailing pattern whenever the kinematic redundancy is sufficient and increased utilization of this pattern during skillful movements suggests optimality of the trailing pattern. The goal of this study is to determine the cost function minimization of which predicts the trailing pattern. We show that extensive experimental testing of many known cost functions cannot successfully explain optimality of the trailing pattern. We therefore propose a novel cost function that represents neural effort for joint coordination. That effort is quantified as the cost of neural information processing required for joint coordination. We show that a tendency to reduce this 'neurocomputational' cost predicts the trailing pattern and that the theoretically developed predictions fully agree with the experimental findings on control of multi-joint movements. Implications for future research of the suggested interpretation of the trailing joint control pattern and the theory of joint coordination underlying it are discussed.

Optimizing water depth for wetland-dependent wildlife could increase wetland restoration success, water efficiency, and water security

USGS Publications Warehouse

Nadeau, Christopher P.; Conway, Courtney J.

2015-01-01

Securing water for wetland restoration efforts will be increasingly difficult as human populations demand more water and climate change alters the hydrologic cycle. Minimizing water use at a restoration site could help justify water use to competing users, thereby increasing future water security. Moreover, optimizing water depth for focal species will increase habitat quality and the probability that the restoration is successful. We developed and validated spatial habitat models to optimize water depth within wetland restoration projects along the lower Colorado River intended to benefit California black rails (Laterallus jamaicensis coturniculus). We observed a 358% increase in the number of black rails detected in the year after manipulating water depth to maximize the amount of predicted black rail habitat in two wetlands. The number of black rail detections in our restoration sites was similar to those at our reference site. Implementing the optimal water depth in each wetland decreased water use while simultaneously increasing habitat suitability for the focal species. Our results also provide experimental confirmation of past descriptive accounts of black rail habitat preferences and provide explicit water depth recommendations for future wetland restoration efforts for this species of conservation concern; maintain surface water depths between saturated soil and 100 mm. Efforts to optimize water depth in restored wetlands around the world would likely increase the success of wetland restorations for the focal species while simultaneously minimizing and justifying water use.

A design for a reusable Ada library

NASA Technical Reports Server (NTRS)

Litke, John D.

1986-01-01

A goal of the Ada language standardization effort is to promote reuse of software, implying the existence of substantial software libraries and the storage/retrieval mechanisms to support them. A searching/cataloging mechanism is proposed that permits full or partial distribution of the database, adapts to a variety of searching mechanisms, permits a changine taxonomy with minimal disruption, and minimizes the requirement of specialized cataloger/indexer skills. The important observation is that key words serve not only as indexing mechanism, but also as an identification mechanism, especially via concatenation and as support for a searching mechanism. By deliberately separating these multiple uses, the modifiability and ease of growth that current libraries require, is achieved.

Enhanced visualization of the bile duct via parallel white light and indocyanine green fluorescence laparoscopic imaging

NASA Astrophysics Data System (ADS)

Demos, Stavros G.; Urayama, Shiro

2014-03-01

Despite best efforts, bile duct injury during laparoscopic cholecystectomy is a major potential complication. Precise detection method of extrahepatic bile duct during laparoscopic procedures would minimize the risk of injury. Towards this goal, we have developed a compact imaging instrumentation designed to enable simultaneous acquisition of conventional white color and NIR fluorescence endoscopic/laparoscopic imaging using ICG as contrast agent. The capabilities of this system, which offers optimized sensitivity and functionality, are demonstrated for the detection of the bile duct in an animal model. This design could also provide a low-cost real-time surgical navigation capability to enhance the efficacy of a variety of other image-guided minimally invasive procedures.

Cross-bispectrum computation and variance estimation

NASA Technical Reports Server (NTRS)

Lii, K. S.; Helland, K. N.

1981-01-01

A method for the estimation of cross-bispectra of discrete real time series is developed. The asymptotic variance properties of the bispectrum are reviewed, and a method for the direct estimation of bispectral variance is given. The symmetry properties are described which minimize the computations necessary to obtain a complete estimate of the cross-bispectrum in the right-half-plane. A procedure is given for computing the cross-bispectrum by subdividing the domain into rectangular averaging regions which help reduce the variance of the estimates and allow easy application of the symmetry relationships to minimize the computational effort. As an example of the procedure, the cross-bispectrum of a numerically generated, exponentially distributed time series is computed and compared with theory.

Optimal feedback control of turbulent channel flow

NASA Technical Reports Server (NTRS)

Bewley, Thomas; Choi, Haecheon; Temam, Roger; Moin, Parviz

1993-01-01

Feedback control equations were developed and tested for computing wall normal control velocities to control turbulent flow in a channel with the objective of reducing drag. The technique used is the minimization of a 'cost functional' which is constructed to represent some balance of the drag integrated over the wall and the net control effort. A distribution of wall velocities is found which minimizes this cost functional some time shortly in the future based on current observations of the flow near the wall. Preliminary direct numerical simulations of the scheme applied to turbulent channel flow indicates it provides approximately 17 percent drag reduction. The mechanism apparent when the scheme is applied to a simplified flow situation is also discussed.

Optimization of a Monte Carlo Model of the Transient Reactor Test Facility

DOE Office of Scientific and Technical Information (OSTI.GOV)

Smith, Kristin; DeHart, Mark; Goluoglu, Sedat

2017-03-01

The ultimate goal of modeling and simulation is to obtain reasonable answers to problems that don’t have representations which can be easily evaluated while minimizing the amount of computational resources. With the advances during the last twenty years of large scale computing centers, researchers have had the ability to create a multitude of tools to minimize the number of approximations necessary when modeling a system. The tremendous power of these centers requires the user to possess an immense amount of knowledge to optimize the models for accuracy and efficiency.This paper seeks to evaluate the KENO model of TREAT to optimizemore » calculational efforts.« less

HIV epidemic control-a model for optimal allocation of prevention and treatment resources.

PubMed

Alistar, Sabina S; Long, Elisa F; Brandeau, Margaret L; Beck, Eduard J

2014-06-01

With 33 million people living with human immunodeficiency virus (HIV) worldwide and 2.7 million new infections occurring annually, additional HIV prevention and treatment efforts are urgently needed. However, available resources for HIV control are limited and must be used efficiently to minimize the future spread of the epidemic. We develop a model to determine the appropriate resource allocation between expanded HIV prevention and treatment services. We create an epidemic model that incorporates multiple key populations with different transmission modes, as well as production functions that relate investment in prevention and treatment programs to changes in transmission and treatment rates. The goal is to allocate resources to minimize R 0, the reproductive rate of infection. We first develop a single-population model and determine the optimal resource allocation between HIV prevention and treatment. We extend the analysis to multiple independent populations, with resource allocation among interventions and populations. We then include the effects of HIV transmission between key populations. We apply our model to examine HIV epidemic control in two different settings, Uganda and Russia. As part of these applications, we develop a novel approach for estimating empirical HIV program production functions. Our study provides insights into the important question of resource allocation for a country's optimal response to its HIV epidemic and provides a practical approach for decision makers. Better decisions about allocating limited HIV resources can improve response to the epidemic and increase access to HIV prevention and treatment services for millions of people worldwide.

Poor Accrual in Palliative Research Studies: An Update From the Rapid Response Radiotherapy Program

PubMed Central

Lien, Karen; Zeng, Liang; Bradley, Nicole; Culleton, Shaelyn; Popovic, Marko; Di Giovanni, Julia; Jamani, Rehana; Cramarossa, Gemma; Nguyen, Janet; Koo, Kaitlin; Jon, Florencia; Chow, Edward

2011-01-01

Background In June 2003, the Rapid Response Radiotherapy Program (RRRP) implemented changes to recruitment strategies in attempts to increase patient accrual to research studies. Such modifications included the use of a dedicated research assistant to screen for and identify eligible study patients, the introduction of more appropriate inclusion criteria, and the switch towards telephone interviews to minimize patient burden. The purpose of this study is to provide an update on patient accrual in the RRRP. Methods All patients seen in the RRRP from January 2002 to December 2009 were recorded in a prospective database. Reasons for referral, eligibility for clinical trials, reasons for non-accrual, and various demographics information were recorded. Descriptive statistics summarized findings. Results A total of 4726 patient visits were recorded from January 1st, 2002 to December 31st, 2009. Prior to changes, the overall rate of accrual into research studies was 14.9% versus 48.1% after changes were implemented. Patients were not accrued onto studies mainly to due ineligibility according to study protocol. Other reasons such as language barrier (12.1%), physician objection (3.5%), patient declining participation (11.3%) and lack of a research assistant (9.3%) were cited. Conclusions Changes in clinical structure and study design can significantly impact accrual patterns in palliative radiotherapy studies. Despite these changes however, the majority of patients are still not enrolled in studies. Therefore additional efforts need to be made to maximize patient accrual and minimize attrition. PMID:29147251

NOEC and LOEC as merely concessive expedients: two unambiguous alternatives and some criteria to maximize the efficiency of dose-response experimental designs.

PubMed

Murado, M A; Prieto, M A

2013-09-01

NOEC and LOEC (no and lowest observed effect concentrations, respectively) are toxicological concepts derived from analysis of variance (ANOVA), a not very sensitive method that produces ambiguous results and does not provide confidence intervals (CI) of its estimates. For a long time, despite the abundant criticism that such concepts have raised, the field of the ecotoxicology is reticent to abandon them (two possible reasons will be discussed), adducing the difficulty of clear alternatives. However, this work proves that a debugged dose-response (DR) modeling, through explicit algebraic equations, enables two simple options to accurately calculate the CI of substantially lower doses than NOEC. Both ANOVA and DR analyses are affected by the experimental error, response profile, number of observations and experimental design. The study of these effects--analytically complex and experimentally unfeasible--was carried out using systematic simulations with realistic data, including different error levels. Results revealed the weakness of NOEC and LOEC notions, confirmed the feasibility of the proposed alternatives and allowed to discuss the--often violated--conditions that minimize the CI of the parametric estimates from DR assays. In addition, a table was developed providing the experimental design that minimizes the parametric CI for a given set of working conditions. This makes possible to reduce the experimental effort and to avoid the inconclusive results that are frequently obtained from intuitive experimental plans. Copyright © 2013 Elsevier B.V. All rights reserved.

Protective Effect of Onion Extract on Bleomycin-Induced Cytotoxicity and Genotoxicity in Human Lymphocytes

PubMed Central

Cho, Yoon Hee; Lee, Joong Won; Woo, Hae Dong; Lee, Sunyeong; Kim, Yang Jee; Lee, Younghyun; Shin, Sangah; Joung, Hyojee; Chung, Hai Won

2016-01-01

Following one of the world’s largest nuclear accidents, occured at Fukushima, Japan in 2011, a significant scientific effort has focused on minimizing the potential adverse health effects due to radiation exposure. The use of natural dietary antioxidants to reduce the risk of radiation-induced oxidative DNA damage is a simple strategy for minimizing radiation-related cancer rates and improving overall health. The onion is among the richest sources of dietary flavonoids and is an important food for increasing their overall intake. Therefore, we examined the effect of an onion extract on cyto- and geno-toxicity in human lymphocytes treated with bleomycin (BLM), a radiomimetic agent. In addition, we measured the frequency of micronuclei (MN) and DNA damage following treatment with BLM using a cytokinesis-blocked micronucleus assay and a single cell gel electrophoresis assay. We observed a significant increase in cell viability in lymphocytes treated with onion extract then exposed to BLM compared to cells treated with BLM alone. The frequency of BLM induced MN and DNA damage increased in a dose-dependent manner; however, when lymphocytes were pretreated with onion extract (10 and 20 μL/mL), the frequency of BLM-induced MN was decreased at all doses of BLM and DNA damage was decreased at 3 μg/mL of BLM. These results suggest that onion extract may have protective effects against BLM-induced cyto- and genotoxicity in human lymphocytes. PMID:26907305

Protective Effect of Onion Extract on Bleomycin-Induced Cytotoxicity and Genotoxicity in Human Lymphocytes.

PubMed

Cho, Yoon Hee; Lee, Joong Won; Woo, Hae Dong; Lee, Sunyeong; Kim, Yang Jee; Lee, Younghyun; Shin, Sangah; Joung, Hyojee; Chung, Hai Won

2016-02-19

Following one of the world's largest nuclear accidents, occured at Fukushima, Japan in 2011, a significant scientific effort has focused on minimizing the potential adverse health effects due to radiation exposure. The use of natural dietary antioxidants to reduce the risk of radiation-induced oxidative DNA damage is a simple strategy for minimizing radiation-related cancer rates and improving overall health. The onion is among the richest sources of dietary flavonoids and is an important food for increasing their overall intake. Therefore, we examined the effect of an onion extract on cyto- and geno-toxicity in human lymphocytes treated with bleomycin (BLM), a radiomimetic agent. In addition, we measured the frequency of micronuclei (MN) and DNA damage following treatment with BLM using a cytokinesis-blocked micronucleus assay and a single cell gel electrophoresis assay. We observed a significant increase in cell viability in lymphocytes treated with onion extract then exposed to BLM compared to cells treated with BLM alone. The frequency of BLM induced MN and DNA damage increased in a dose-dependent manner; however, when lymphocytes were pretreated with onion extract (10 and 20 μL/mL), the frequency of BLM-induced MN was decreased at all doses of BLM and DNA damage was decreased at 3 μg/mL of BLM. These results suggest that onion extract may have protective effects against BLM-induced cyto- and genotoxicity in human lymphocytes.

Underestimating the effects of spatial heterogeneity due to individual movement and spatial scale: infectious disease as an example

USGS Publications Warehouse

Cross, Paul C.; Caillaud, Damien; Heisey, Dennis M.

2013-01-01

Many ecological and epidemiological studies occur in systems with mobile individuals and heterogeneous landscapes. Using a simulation model, we show that the accuracy of inferring an underlying biological process from observational data depends on movement and spatial scale of the analysis. As an example, we focused on estimating the relationship between host density and pathogen transmission. Observational data can result in highly biased inference about the underlying process when individuals move among sampling areas. Even without sampling error, the effect of host density on disease transmission is underestimated by approximately 50 % when one in ten hosts move among sampling areas per lifetime. Aggregating data across larger regions causes minimal bias when host movement is low, and results in less biased inference when movement rates are high. However, increasing data aggregation reduces the observed spatial variation, which would lead to the misperception that a spatially targeted control effort may not be very effective. In addition, averaging over the local heterogeneity will result in underestimating the importance of spatial covariates. Minimizing the bias due to movement is not just about choosing the best spatial scale for analysis, but also about reducing the error associated with using the sampling location as a proxy for an individual’s spatial history. This error associated with the exposure covariate can be reduced by choosing sampling regions with less movement, including longitudinal information of individuals’ movements, or reducing the window of exposure by using repeated sampling or younger individuals.

Agent-Based Models of Strategies for the Emergence and Evolution of Grammatical Agreement

PubMed Central

Beuls, Katrien; Steels, Luc

2013-01-01

Grammatical agreement means that features associated with one linguistic unit (for example number or gender) become associated with another unit and then possibly overtly expressed, typically with morphological markers. It is one of the key mechanisms used in many languages to show that certain linguistic units within an utterance grammatically depend on each other. Agreement systems are puzzling because they can be highly complex in terms of what features they use and how they are expressed. Moreover, agreement systems have undergone considerable change in the historical evolution of languages. This article presents language game models with populations of agents in order to find out for what reasons and by what cultural processes and cognitive strategies agreement systems arise. It demonstrates that agreement systems are motivated by the need to minimize combinatorial search and semantic ambiguity, and it shows, for the first time, that once a population of agents adopts a strategy to invent, acquire and coordinate meaningful markers through social learning, linguistic self-organization leads to the spontaneous emergence and cultural transmission of an agreement system. The article also demonstrates how attested grammaticalization phenomena, such as phonetic reduction and conventionalized use of agreement markers, happens as a side effect of additional economizing principles, in particular minimization of articulatory effort and reduction of the marker inventory. More generally, the article illustrates a novel approach for studying how key features of human languages might emerge. PMID:23527055

Ensuring Quality in AFRINEST and SATT

PubMed Central

2013-01-01

Background: Three randomized open-label clinical trials [Simplified Antibiotic Therapy Trial (SATT) Bangladesh, SATT Pakistan and African Neonatal Sepsis Trial (AFRINEST)] were developed to test the equivalence of simplified antibiotic regimens compared with the standard regimen of 7 days of parenteral antibiotics. These trials were originally conceived and designed separately; subsequently, significant efforts were made to develop and implement a common protocol and approach. Previous articles in this supplement briefly describe the specific quality control methods used in the individual trials; this article presents additional information about the systematic approaches used to minimize threats to validity and ensure quality across the trials. Methods: A critical component of quality control for AFRINEST and SATT was striving to eliminate variation in clinical assessments and decisions regarding eligibility, enrollment and treatment outcomes. Ensuring appropriate and consistent clinical judgment was accomplished through standardized approaches applied across the trials, including training, assessment of clinical skills and refresher training. Standardized monitoring procedures were also applied across the trials, including routine (day-to-day) internal monitoring of performance and adherence to protocols, systematic external monitoring by funding agencies and external monitoring by experienced, independent trial monitors. A group of independent experts (Technical Steering Committee/Technical Advisory Group) provided regular monitoring and technical oversight for the trials. Conclusions: Harmonization of AFRINEST and SATT have helped to ensure consistency and quality of implementation, both internally and across the trials as a whole, thereby minimizing potential threats to the validity of the trials’ results. PMID:23945575

Concrete bridge deck early problem detection and mitigation using robotics

NASA Astrophysics Data System (ADS)

Gucunski, Nenad; Yi, Jingang; Basily, Basily; Duong, Trung; Kim, Jinyoung; Balaguru, Perumalsamy; Parvardeh, Hooman; Maher, Ali; Najm, Husam

2015-04-01

More economical management of bridges can be achieved through early problem detection and mitigation. The paper describes development and implementation of two fully automated (robotic) systems for nondestructive evaluation (NDE) and minimally invasive rehabilitation of concrete bridge decks. The NDE system named RABIT was developed with the support from Federal Highway Administration (FHWA). It implements multiple NDE technologies, namely: electrical resistivity (ER), impact echo (IE), ground-penetrating radar (GPR), and ultrasonic surface waves (USW). In addition, the system utilizes advanced vision to substitute traditional visual inspection. The RABIT system collects data at significantly higher speeds than it is done using traditional NDE equipment. The associated platform for the enhanced interpretation of condition assessment in concrete bridge decks utilizes data integration, fusion, and deterioration and defect visualization. The interpretation and visualization platform specifically addresses data integration and fusion from the four NDE technologies. The data visualization platform facilitates an intuitive presentation of the main deterioration due to: corrosion, delamination, and concrete degradation, by integrating NDE survey results and high resolution deck surface imaging. The rehabilitation robotic system was developed with the support from National Institute of Standards and Technology-Technology Innovation Program (NIST-TIP). The system utilizes advanced robotics and novel materials to repair problems in concrete decks, primarily early stage delamination and internal cracking, using a minimally invasive approach. Since both systems use global positioning systems for navigation, some of the current efforts concentrate on their coordination for the most effective joint evaluation and rehabilitation.

HEXIM1 is a promiscuous double-stranded RNA-binding protein and interacts with RNAs in addition to 7SK in cultured cells

PubMed Central

Li, Qintong; Cooper, Jeffrey J.; Altwerger, Gary H.; Feldkamp, Michael D.; Shea, Madeline A.; Price, David H.

2007-01-01

P-TEFb regulates eukaryotic gene expression at the level of transcription elongation, and is itself controlled by the reversible association of 7SK RNA and an RNA-binding protein HEXIM1 or HEXIM2. In an effort to determine the minimal region of 7SK needed to interact with HEXIM1 in vitro, we found that an oligo comprised of nucleotides 10–48 sufficed. A bid to further narrow down the minimal region of 7SK led to a surprising finding that HEXIM1 binds to double-stranded RNA in a sequence-independent manner. Both dsRNA and 7SK (10–48), but not dsDNA, competed efficiently with full-length 7SK for HEXIM1 binding in vitro. Upon binding dsRNA, a large conformational change was observed in HEXIM1 that allowed the recruitment and inhibition of P-TEFb. Both subcellular fractionation and immunofluorescence demonstrated that, while most HEXIM1 is found in the nucleus, a significant fraction is found in the cytoplasm. Immunoprecipitation experiments demonstrated that both nuclear and cytoplasmic HEXIM1 is associated with RNA. Interestingly, the one microRNA examined (mir-16) was found in HEXIM1 immunoprecipitates, while the small nuclear RNAs, U6 and U2, were not. Our study illuminates novel properties of HEXIM1 both in vitro and in vivo, and suggests that HEXIM1 may be involved in other nuclear and cytoplasmic processes besides controlling P-TEFb. PMID:17395637

Adequacy of depression treatment among college students in the United States.

PubMed

Eisenberg, Daniel; Chung, Henry

2012-01-01

There is no published evidence on the adequacy of depression care among college students and how this varies by subpopulations and provider types. We estimated the prevalence of minimally adequate treatment among students with significant past-year depressive symptoms. Data were collected via a confidential online survey of a random sample of 8488 students from 15 colleges and universities in the 2009 Healthy Minds Study. Depressive symptoms were assessed by the Patient Health Questionnaire-2, adapted to a past-year time frame. Students with probable depression were coded as having received minimally adequate depression care based on the criteria from Wang and colleagues (2005). Minimally adequate treatment was received by only 22% of depressed students. The likelihood of minimally adequate treatment was similarly low for both psychiatric medication and psychotherapy. Minimally adequate care was lower for students prescribed medication by a primary care provider as compared to a psychiatrist (P<.01). Racial/ethnic minority students were less likely to receive depression care (P<.01). Adequacy of depression care is a significant problem in the college population. Solutions will likely require greater availability of psychiatry care, better coordination between specialty and primary care using collaborative care models, and increased efforts to retain students in psychotherapy. Copyright © 2012 Elsevier Inc. All rights reserved.

Validation of an LES Model for Soot Evolution against DNS Data in Turbulent Jet Flames

NASA Astrophysics Data System (ADS)

Mueller, Michael

2012-11-01

An integrated modeling approach for soot evolution in turbulent reacting flows is validated against three-dimensional Direct Numerical Simulation (DNS) data in a set of n-heptane nonpremixed temporal jet flames. As in the DNS study, the evolution of the soot population is described statistically with the Hybrid Method of Moments (HMOM). The oxidation of the fuel and formation of soot precursors are described with the Radiation Flamelet/Progress Variable (RFPV) model that includes an additional transport equation for Polycyclic Aromatic Hydrocarbons (PAH) to account for the slow chemistry governing these species. In addition, the small-scale interactions between soot, chemistry, and turbulence are described with a presumed subfilter PDF approach that accounts for the very large spatial intermittency characterizing soot in turbulent reacting flows. The DNS dataset includes flames at three different Damköhler numbers to study the influence of global mixing rates on the evolution of PAH and soot. In this work, the ability of the model to capture these trends quantitatively as Damköhler number varies is investigated. In order to reliably assess the LES approach, the LES is initialized from the filtered DNS data after an initial transitional period in an effort to minimize the hydrodynamic differences between the DNS and the LES.

Common Data Acquisition Systems (DAS) Software Development for Rocket Propulsion Test (RPT) Test Facilities - A General Overview

NASA Technical Reports Server (NTRS)

Hebert, Phillip W., Sr.; Hughes, Mark S.; Davis, Dawn M.; Turowski, Mark P.; Holladay, Wendy T.; Marshall, PeggL.; Duncan, Michael E.; Morris, Jon A.; Franzl, Richard W.

2012-01-01

The advent of the commercial space launch industry and NASA's more recent resumption of operation of Stennis Space Center's large test facilities after thirty years of contractor control resulted in a need for a non-proprietary data acquisition system (DAS) software to support government and commercial testing. The software is designed for modularity and adaptability to minimize the software development effort for current and future data systems. An additional benefit of the software's architecture is its ability to easily migrate to other testing facilities thus providing future commonality across Stennis. Adapting the software to other Rocket Propulsion Test (RPT) Centers such as MSFC, White Sands, and Plumbrook Station would provide additional commonality and help reduce testing costs for NASA. Ultimately, the software provides the government with unlimited rights and guarantees privacy of data to commercial entities. The project engaged all RPT Centers and NASA's Independent Verification & Validation facility to enhance product quality. The design consists of a translation layer which provides the transparency of the software application layers to underlying hardware regardless of test facility location and a flexible and easily accessible database. This presentation addresses system technical design, issues encountered, and the status of Stennis' development and deployment.

Clean, agile alternative binders, additives and plasticizers for propellant and explosive formulations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hoffman, D.M.; Hawkins, T.W.; Lindsay, G.A.

1994-12-01

As part of the Strategic Environmental Research and Development Program (SERDP) a clean, agile manufacturing of explosives, propellants and pyrotechniques (CANPEP) effort set about to identify new approaches to materials and processes for producing propellants, explosives and pyrotechniques (PEP). The RDX based explosive PBXN-109 and gun propellant M-43 were identified as candidates for which waste minimization and recycling modifications might be implemented in a short time frame. The binders, additives and plasticizers subgroup identified cast non-curable thermoplastic elastomer (TPE) formulations as possible replacement candidates for these formulations. Paste extrudable explosives were also suggested as viable alternatives to PBXN-109. Commercial inertmore » and energetic TPEs are reviewed. Biodegradable and hydrolyzable binders are discussed. The applicability of various types of explosive formulations are reviewed and some issues associated with implementation of recyclable formulations are identified. It is clear that some processing and weaponization modifications will need to be made if any of these approaches are to be implemented. The major advantages of formulations suggested here over PBXN-109 and M-43 is their reuse/recyclability. Formulations using TPE or Paste could by recovered from a generic bomb or propellant and reused if they met specification or easily reprocessed and sold to the mining industry.« less

Tapholes in sugar maples: What happens in the tree.

Treesearch

Russell S. Walters; Alex L. Shigo

1978-01-01

Maple syrup production starts by drilling a taphole in the tree. This process injures the wood, which may become discolored or decayed as a result. If trees are to be tapped, every effort must be made to minimize injury while obtaining the desired amount of sap. Information about tapholes is given here for the benefit of the producer. Some important points discussed...

REFERENCE CONDITION APPROACH TO THE ASSESSMENT OF BIOLOGICAL INTEGRITY IN STREAMS OF THE SOUTHERN ROCKY MOUNTAINS AND ITS USE IN MEASURING THE EFFECTIVENESS OF MILE-REMEDIATION EFFORTS

EPA Science Inventory

A recent development in water quality assessment is the comparison of assemblage data from impacted stream segments with that for groups of segments representing reference (or minimally-impacted) conditions. The degree of impairment of a stream segment is expressed as metrics, su...

Proceedings of the 1994 international meeting on reduced enrichment for research and test reactors

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1997-08-01

This meeting brought together participants in the international effort to minimize and eventually eliminate the use of highly enriched uranium in civilian nuclear programs. Papers cover the following topics: National programs; fuel cycle; nuclear fuels; analyses; advanced reactors; and reactor conversions. Selected papers have been indexed separately for inclusion to the Energy Science and Technology Database.

Development and application of a probabilistic method for wildfire suppression cost modeling

Treesearch

Matthew P. Thompson; Jessica R. Haas; Mark A. Finney; David E. Calkin; Michael S. Hand; Mark J. Browne; Martin Halek; Karen C. Short; Isaac C. Grenfell

2015-01-01

Wildfire activity and escalating suppression costs continue to threaten the financial health of federal land management agencies. In order to minimize and effectively manage the cost of financial risk, agencies need the ability to quantify that risk. A fundamental aim of this research effort, therefore, is to develop a process for generating risk-based metrics for...

Some optical properties of the spiral inflector

NASA Astrophysics Data System (ADS)

Toprek, Dragan; Subotic, Krunoslav

1999-07-01

This paper compares some optical properties of different spiral inflectors using the program CASINO. The electric field distribution in the inflectors has been numerically calculated from an electric potential map produced by the program RELAX3D. The magnetic field is assumed to be constant. We have also made an effort to minimize the inflector fringe field using the RELAX3D program.

Access and Success: The Role of Distance Education in Girl-Child Education in Nigeria

ERIC Educational Resources Information Center

Nkechinyere Amadi, Martha

2011-01-01

Education in Nigeria is an instrument par excellence for affecting national development. In spite of the global efforts to broaden opportunities in many schools all over Nigeria, many are not responding adequately to the needs of their students. A large majority of the learners do not acquire even minimal levels of learning due to such factors as…

NOAA Sea Grant awards $15.9 million in projects to build resilient coastal

Science.gov Websites

a larger effort by President Obama's Administration to help reduce climate-related impacts on ocean coastal flooding and erosion from coastal storms, as well as research into the long-term impacts of these minimize impacts. For instance, Ohio Sea Grant is funding research on watershed and river discharge models

An automated data collection system for a Charpy impact tester

NASA Technical Reports Server (NTRS)

Weigman, Bernard J.; Spiegel, F. Xavier

1993-01-01

A method for automated data collection has been developed for a Charpy impact tester. A potentiometer is connected to the pivot point of the hammer and measures the angular displacement of the hammer. This data is collected with a computer and, through appropriate software, accurately records the energy absorbed by the specimen. The device can be easily calibrated with minimal effort.

Development of a lateral flow immunoassay for rapid field detection of the red imported fire ant, Solenopsis invicta (Hymenoptera: Formicidae)

USDA-ARS?s Scientific Manuscript database

The red imported fire ant, Solenopsis invicta, is an aggressive, highly invasive pest ant species from South America that has been introduced into North America, Asia and Australia. Quarantine efforts have been imposed in the United States to minimize the spread of the ant. There remains an acute ...

Science and Technology for a Safer Nation

DTIC Science & Technology

2008-03-01

facilities. “Harvesting Innovation” gathers detailed information about efforts supporting Laboratory-Directed Research and Development ( LDRD ...programs and shares this with DHS directors, division heads and program managers. Energy Department labs allocate some $400 million per year in LDRD ...correlate LDRD projects with DHS S&T strategic goals and ongoing programs as well as planned projects in all six S&T divisions. This minimizes

Interagency Report on Orbital Debris, 1995

NASA Technical Reports Server (NTRS)

1995-01-01

This 1995 report updates the findings and recommendations of the 1989 report and reflects the authors' progress in understanding and managing the orbital debris environment. It provides an up-to-date portrait of their measurement, modeling, and mitigation efforts; and a set of recommendations outlining specific steps they should pursue, both domestically and internationally, to minimize the potential hazard posed by orbital debris.

Hip-Hop and Youth Culture: Contemplations of an Emerging Cultural Phenomenon

ERIC Educational Resources Information Center

Taylor, Carl S.; Taylor, Virgil

2004-01-01

Throughout the last 25 years, a new form of expression has continually evolved despite the efforts of many in the so-called "establishment to minimize its influence on young people." This form of expression that was once limited to urban music and dance has become a widespread form of communication and expression by young people throughout the…

Writing in the Content Areas. Research Brief

ERIC Educational Resources Information Center

Walker, Karen

2006-01-01

In an effort for schools to obtain Adequate Yearly Progress, the pressure is on to make certain that students are loaded with as much information as possible in order to score well on the high stakes tests. Writing has continued to move down the list of priorities of what is taught because: it is not being tested or is minimally being assessed.…

Autonomous Object Characterization with Large Datasets

DTIC Science & Technology

2015-10-18

desk, where a substantial amount of effort is required to transform raw photometry into a data product, minimizing the amount of time the analyst has...were used to explore concepts in satellite characterization and satellite state change. The first algorithm provides real- time stability estimation... Timely and effective space object (SO) characterization is a challenge, and requires advanced data processing techniques. Detection and identification

Engineered Structured Sorbents for the Adsorption of Carbon Dioxide and Water Vapor from Manned Spacecraft Atmospheres: Applications and Modeling 2007/2008

NASA Technical Reports Server (NTRS)

Knox, James C.; Howard, David F.; Perry, Jay L.

2007-01-01

In NASA s Vision for Space Exploration, humans will once again travel beyond the confines of earth s gravity, this time to remain there for extended periods. These forays will place unprecedented demands on launch systems. They must not only blast out of earth s gravity well as during the Apollo moon missions, but also launch the supplies needed to sustain a larger crew over much longer periods. Thus all spacecraft systems, including those for the separation of metabolic carbon dioxide and water from a crewed vehicle, must be minimized with respect to mass, power, and volume. Emphasis is also placed on system robustness both to minimize replacement parts and ensure crew safety when a quick return to earth is not possible. This paper describes efforts to improve on typical packed beds of sorbent pellets by making use of structured sorbents and alternate bed configurations to improve system efficiency and reliability. The development efforts described offer a complimentary approach combining testing of subscale systems and multiphysics computer simulations to characterize the regenerative heating substrates and evaluation of engineered structured sorbent geometries. Mass transfer, heat transfer, and fluid dynamics are included in the transient simulations.

[Effects of nurses' perception of servant leadership on leader effectiveness, satisfaction and additional effort: focused on the mediating effects of leader trust and value congruence].

PubMed

Han, Sang Sook; Kim, Nam Eun

2012-02-01

This study was done to examine the effects of nurses' perception of servant leadership on leader effectiveness, satisfaction and promoting additional effort. The focus was the mediating effects of leader trust and value congruence. Data were collected from 361 RN-BSN students and nurses participating in nationally attended in-service training programs. Data were analyzed using descriptive statistics and structural analysis with SPSS 17.0 windows program and Amos 7.0. Direct effects of nurses' perception of servant leadership were negative, but mediating effects of trust and value congruency were positively correlated with leader effectiveness, satisfaction and additional effort, that is servant leadership should be effective through mediating factors. The study results indicate that if the middle managers of nurses can build leader trust and value congruency between nurses through servant leadership, leader effectiveness, satisfaction and additional effort on the part of the nurses could result in a positive change in the long term.

Ranging airport pseudolite for local area augmentation using the global positioning system

NASA Astrophysics Data System (ADS)

Bartone, Chris Gregory

The Local Area Augmentation System (LAAS) is being developed to support precision approach and landing operations in and about the local area surrounding an airport. The LAAS Program is currently under development by the Federal Aviation Administration (FAA) with Minimum Aviation System Performance Standards for the LAAS being developed by RTCA, Incorporated. The LAAS uses differential Global Positioning System (DGPS) and includes one or more airport pseudolites (APL) to increase the availability for certain installations. This dissertation addresses the addition of a differentially corrected, ranging APL into a LAAS. Prior to this work, no ranging APL has been integrated into a prototype LAAS and demonstrated in a real-time flight environment showing that an increase in LAAS availability is feasible. The APL requirements resulted in a prototype APL transmitting and receiving subsystem with a coarse-acquisition (C/A) code format that could be operated at any frequency within the L1± 10.0 MHz band. To investigate the major APL error the developmental approach was performed in two phases. Phase I implemented an APL operating at a center frequency off-L1 and concentrated on multipath limiting. The Phase II on-L1 APL architecture implemented a unique pulsing, automatic gain control (AGC) and GPS Blanker technique in the common reception path to maximize APL signal tracking and minimize electromagnetic interference to DGPS. To minimize ground multipath for the APL geometry, which is more severe than for GPS, a multipath limiting antenna (MLA) was designed, fabricated, and tested within a 4-month period. The implementation of this MLA concept was a first for APL applications and also contributed to the successful multipath limiting of ground multipath at the DGPS LAAS Ground Station. This effort successfully demonstrated that ground multipath can be limited (with low variance and no long-term bias) for the APL geometry and that suitable precision approach performance can be achieved. For this effort a total of 11 flight tests with three test aircraft (Piper Saratoga, FAA Boeing 727, and Ohio University DC-3) and 14 distinct laboratory tests were conducted to produce the APL Subsystem Architecture, data, and system performance documented in this document.

The Business Case for Automated Software Engineering

NASA Technical Reports Server (NTRS)

Menzies, Tim; Elrawas, Oussama; Hihn, Jairus M.; Feather, Martin S.; Madachy, Ray; Boehm, Barry

2007-01-01

Adoption of advanced automated SE (ASE) tools would be more favored if a business case could be made that these tools are more valuable than alternate methods. In theory, software prediction models can be used to make that case. In practice, this is complicated by the 'local tuning' problem. Normally. predictors for software effort and defects and threat use local data to tune their predictions. Such local tuning data is often unavailable. This paper shows that assessing the relative merits of different SE methods need not require precise local tunings. STAR 1 is a simulated annealer plus a Bayesian post-processor that explores the space of possible local tunings within software prediction models. STAR 1 ranks project decisions by their effects on effort and defects and threats. In experiments with NASA systems. STARI found one project where ASE were essential for minimizing effort/ defect/ threats; and another project were ASE tools were merely optional.

European Union pharmacovigilance capabilities: potential for the new legislation

PubMed Central

Tanti, Amy; Kouvelas, Dimitrios; Lungu, Calin; Pirozynski, Michal; Serracino-Inglott, Anthony; Aislaitner, George

2015-01-01

European Directives and Regulations introduced between late 2010 and 2012 have substantially overhauled pharmacovigilance processes across the European Union (EU). In this review, the implementation of the pharmacovigilance legislative framework by EU regulators is examined with the aim of mapping Directive 2010/84/EU and Regulation EC No. 1235/2010 against their aspired objectives of strengthening and rationalizing pharmacovigilance in the EU. A comprehensive review of the current state of affairs of the progress made by EU regulators is presented in this paper. Our review shows that intense efforts by regulators and industry to fulfil legislative obligations have resulted in major positive shifts in pharmacovigilance. Harmonized decision making, transparency in decision processes with patient involvement, information accessibility to the public, patient adverse drug reaction reporting, efforts in communication and enhanced cooperation between member states to maximize resource utilization and minimize duplication of efforts are observed. PMID:26301067

Humid site stabilization and closure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cutshall, N.H.

1981-01-01

The purpose of the work described here is to identify and evaluate the importance of factors that are expected to dictate the nature of site stabilization and closure requirements. Subsequent efforts will plan for implementation of such requirements. Two principal areas of site stabilization and closure effort will be pursued initially - geological management and vegetation management. The geological effort will focus on chemical weathering and surficial erosion. Such catastrophic geologic events as landslides, flooding, earthquakes, volcanos, etc. are already considered in site selection and operation and these factors will not be emphasized initially. Vegetation management will be designed tomore » control erosion, to minimize nuclide mobilization by roots and to be compatible with natural successional pressures. It is anticipated that the results of this work will be important both to site selection and operation as well as the actual stabilization and closure procedure.« less

MISSIONS: The Mobile-Based Disaster Mitigation System in Indonesia

NASA Astrophysics Data System (ADS)

Passarella, Rossi; Putri Raflesia, Sarifah; Lestarini, Dinda; Rifai, Ahmad; Veny, Harumi

2018-04-01

Disaster mitigation is essential to minimize the effects of disasters. Indonesia is one of the disaster prone areas in Asia and the government explores the usage of Information technology (IT) to aid its mitigation efforts. Currently, there are Indonesian websites which hold information regarding the weather monitoring, climate conditions, and geophysics. But, there is no clear indicator of mitigation efforts or things to do during an emergency. Therefore, this research proposed MISSIONS, a disaster mitigation model using geo-fencing technique to detect the location of the users through their mobile devices. MISSIONS uses mobile-based disaster mitigation system as a way to disseminate critical information to victims during emergency when they are in disaster zones using virtual fences. It aims to help the government to reduce the effects of disaster and aid in the mitigation efforts. The implementation result shows that MISSIONS have a high accuracy in detecting user whereabouts.

Image registration assessment in radiotherapy image guidance based on control chart monitoring.

PubMed

Xia, Wenyao; Breen, Stephen L

2018-04-01

Image guidance with cone beam computed tomography in radiotherapy can guarantee the precision and accuracy of patient positioning prior to treatment delivery. During the image guidance process, operators need to take great effort to evaluate the image guidance quality before correcting a patient's position. This work proposes an image registration assessment method based on control chart monitoring to reduce the effort taken by the operator. According to the control chart plotted by daily registration scores of each patient, the proposed method can quickly detect both alignment errors and image quality inconsistency. Therefore, the proposed method can provide a clear guideline for the operators to identify unacceptable image quality and unacceptable image registration with minimal effort. Experimental results demonstrate that by using control charts from a clinical database of 10 patients undergoing prostate radiotherapy, the proposed method can quickly identify out-of-control signals and find special cause of out-of-control registration events.

The economy of risk and respect: accounts by Puerto Rican sex workers of HIV risk taking.

PubMed

Hansen, Helena; Lopez-Iftikhar, Maria Margarita; Alegría, Margarita

2002-11-01

Three-hundred-eleven female drug-using sex workers in urban Puerto Rico were asked to describe their last negotiation with a client. They described efforts to protect themselves from many hazards of sex work, including violence, illness, and drug withdrawal. They also described efforts to minimize the stigma and marginalization of sex work by cultivating relationships with clients, distinguishing between types of clients, and prioritizing their role as mothers. Sex workers adopted alternating gender roles to leverage autonomy and respect from clients. Their narratives suggest that sex workers negotiate a world in which HIV is relative to other risks, and in which sexual practices which are incomprehensible from an HIV-prevention perspective are actually rooted in a local cultural logic. Future HIV prevention efforts should frame condom use and other self-protective acts in terms that build upon sex workers own strategies for understanding their options and modifying their risks.

Collaborative labeling of malignant glioma with WebMILL: a first look

NASA Astrophysics Data System (ADS)

Singh, Eesha; Asman, Andrew J.; Xu, Zhoubing; Chambless, Lola; Thompson, Reid; Landman, Bennett A.

2012-02-01

Malignant gliomas are the most common form of primary neoplasm in the central nervous system, and one of the most rapidly fatal of all human malignancies. They are treated by maximal surgical resection followed by radiation and chemotherapy. Herein, we seek to improve the methods available to quantify the extent of tumors using newly presented, collaborative labeling techniques on magnetic resonance imaging. Traditionally, labeling medical images has entailed that expert raters operate on one image at a time, which is resource intensive and not practical for very large datasets. Using many, minimally trained raters to label images has the possibility of minimizing laboratory requirements and allowing high degrees of parallelism. A successful effort also has the possibility of reducing overall cost. This potentially transformative technology presents a new set of problems, because one must pose the labeling challenge in a manner accessible to people with little or no background in labeling medical images and raters cannot be expected to read detailed instructions. Hence, a different training method has to be employed. The training must appeal to all types of learners and have the same concepts presented in multiple ways to ensure that all the subjects understand the basics of labeling. Our overall objective is to demonstrate the feasibility of studying malignant glioma morphometry through statistical analysis of the collaborative efforts of many, minimally-trained raters. This study presents preliminary results on optimization of the WebMILL framework for neoplasm labeling and investigates the initial contributions of 78 raters labeling 98 whole-brain datasets.

Development of reclaimed potable water quality criteria

NASA Technical Reports Server (NTRS)

Flory, D. A.; Weir, F. W.

1979-01-01

In order to minimize launch requirements necessary to meet the demands of long-term spaceflight, NASA will reuse water reclaimed from various on-board sources including urine, feces, wash water and humidity condensate. Development of reclamation systems requires the promulgation of water quality standards for potable reuse of the reclaimed water. Existing standards for domestic U.S. potable water consumption were developed, but do not consider the peculiar problems associated with the potable reuse of recycled water. An effort was made to: (1) define a protocol by which comprehensive reclaimed water potability/palatability criteria can be established and updated; and (2) continue the effort to characterize the organic content of reclaimed water in the Regenerative Life Support Evaluation.

The NOAA-NASA CZCS Reanalysis Effort

NASA Technical Reports Server (NTRS)

Gregg, Watson W.; Conkright, Margarita E.; OReilly, John E.; Patt, Frederick S.; Wang, Meng-Hua; Yoder, James; Casey-McCabe, Nancy; Koblinsky, Chester J. (Technical Monitor)

2001-01-01

Satellite observations of global ocean chlorophyll span over two decades. However, incompatibilities between processing algorithms prevent us from quantifying natural variability. We applied a comprehensive reanalysis to the Coastal Zone Color Scanner (CZCS) archive, called the NOAA-NASA CZCS Reanalysis (NCR) Effort. NCR consisted of 1) algorithm improvement (AI), where CZCS processing algorithms were improved using modernized atmospheric correction and bio-optical algorithms, and 2) blending, where in situ data were incorporated into the CZCS AI to minimize residual errors. The results indicated major improvement over the previously available CZCS archive. Global spatial and seasonal patterns of NCR chlorophyll indicated remarkable correspondence with modern sensors, suggesting compatibility. The NCR permits quantitative analyses of interannual and interdecadal trends in global ocean chlorophyll.

Nanosensors and nanomaterials for monitoring glucose in diabetes.

PubMed

Cash, Kevin J; Clark, Heather A

2010-12-01

Worldwide, diabetes is a rapidly growing problem that is managed at the individual level by monitoring and controlling blood glucose levels to minimize the negative effects of the disease. Because of limitations in diagnostic methods, significant research efforts are focused on developing improved methods to measure glucose. Nanotechnology has impacted these efforts by increasing the surface area of sensors, improving the catalytic properties of electrodes and providing nanoscale sensors. Here, we discuss developments in the past several years on both nanosensors that directly measure glucose and nanomaterials that improve glucose sensor function. Finally, we discuss challenges that must be overcome to apply these developments in the clinic. Copyright © 2010 Elsevier Ltd. All rights reserved.

Development of risk maps to minimize uranium exposures in the Navajo Churchrock mining district

PubMed Central

2009-01-01

Background Decades of improper disposal of uranium-mining wastes on the Navajo Nation has resulted in adverse human and ecological health impacts as well as socio-cultural problems. As the Navajo people become increasingly aware of the contamination problems, there is a need to develop a risk-communication strategy to properly inform tribal members of the extent and severity of the health risks. To be most effective, this strategy needs to blend accepted risk-communication techniques with Navajo perspectives such that the strategy can be used at the community level to inform culturally- and toxicologically-relevant decisions about land and water use as well as mine-waste remediation. Objective The objective of this study was to develop GIS-based thematic maps as communication tools to clearly identify high risk exposure areas and offer alternatives to minimize public and ecological health impacts. Methods Thematic maps were produced that incorporated data derived from environmental sampling and public health surveys. The maps show the location and quality of unregulated water resources and identify regulated water sources that could be used as alternatives. In addition, the maps show the location of contaminated soil and sediment areas in which disturbance of surface deposits should be avoided. Preliminary feedback was collected from an informal Navajo working group to assess the clarity and efficacy of this proposed communication method. Results The working group found the maps to be both clear and effective, and made suggestions for improvements, such as the addition of more map features. The working group predicted that once the maps are presented to the public, water hauling and soil use behaviors will change, and dialogue with chapter officials will be initiated to accelerate further risk reduction efforts. Implications Because risk communication is complicated by language barriers, lack of infrastructure, and historical mistrust of non-Navajo researchers, mapping provides an easily interpretable medium that can be objectively viewed by community members and decision makers to evaluate activities that affect toxicant exposures. PMID:19589163

Development of risk maps to minimize uranium exposures in the Navajo Churchrock mining district.

PubMed

deLemos, Jamie L; Brugge, Doug; Cajero, Miranda; Downs, Mallery; Durant, John L; George, Christine M; Henio-Adeky, Sarah; Nez, Teddy; Manning, Thomas; Rock, Tommy; Seschillie, Bess; Shuey, Chris; Lewis, Johnnye

2009-07-09

Decades of improper disposal of uranium-mining wastes on the Navajo Nation has resulted in adverse human and ecological health impacts as well as socio-cultural problems. As the Navajo people become increasingly aware of the contamination problems, there is a need to develop a risk-communication strategy to properly inform tribal members of the extent and severity of the health risks. To be most effective, this strategy needs to blend accepted risk-communication techniques with Navajo perspectives such that the strategy can be used at the community level to inform culturally- and toxicologically-relevant decisions about land and water use as well as mine-waste remediation. The objective of this study was to develop GIS-based thematic maps as communication tools to clearly identify high risk exposure areas and offer alternatives to minimize public and ecological health impacts. Thematic maps were produced that incorporated data derived from environmental sampling and public health surveys. The maps show the location and quality of unregulated water resources and identify regulated water sources that could be used as alternatives. In addition, the maps show the location of contaminated soil and sediment areas in which disturbance of surface deposits should be avoided. Preliminary feedback was collected from an informal Navajo working group to assess the clarity and efficacy of this proposed communication method. The working group found the maps to be both clear and effective, and made suggestions for improvements, such as the addition of more map features. The working group predicted that once the maps are presented to the public, water hauling and soil use behaviors will change, and dialogue with chapter officials will be initiated to accelerate further risk reduction efforts. Because risk communication is complicated by language barriers, lack of infrastructure, and historical mistrust of non-Navajo researchers, mapping provides an easily interpretable medium that can be objectively viewed by community members and decision makers to evaluate activities that affect toxicant exposures.

Can Wing Tip Vortices Be Accurately Simulated?

DTIC Science & Technology

2011-07-01

additional tail buffeting.2 In commercial applications, winglets have been installed on passenger aircraft to minimize vortex formation and reduce lift...air. In military applications, wing tip In commercial applications, winglets have been installed on passenger aircraft to minimize increases with downstream distances.

Minimizing corrosive action in timber bridges treated with waterborne preservatives

Treesearch

Samuel L. Zelinka; Douglas R. Rammer; James P. Wacker

2007-01-01

This work will briefly review published literature and current research activities on the corrosion of metals in contact with wood treated with waterborne alternatives to CCA. In addition, recommendations to minimize these corrosive effects in timber bridges will be discussed.

Latex allergy: the perspective from the surgical suite.

PubMed

Elliott, Beth A

2002-08-01

Latex allergy in the perioperative setting presents unique challenges to the health care system. Specific needs of the latex-sensitive patient are paramount, but consideration must also include the impact on health care workers vis-a-vis latex sensitization, environmental allergen control, and barrier protection against blood-borne pathogens. It has been well documented that the greatest source of latex aeroallergen in the surgical setting is latex gloves (both sterile and nonsterile). Levels of latex aeroallergen correlate strongly with use of high-allergen and powdered gloves, total number of gloves used, and the hours of activity in a given environment. A significant reduction in aeroallergen (>10-fold) can be achieved by switching to low-allergen gloves. Ready availability of and encouragement to use nonlatex alternatives when appropriate can further reduce exposure to latex allergens. Since 1998, the Food and Drug Administration has required all medical devices (or their packaging) that contain natural rubber latex to be so labeled. In addition, industry has responded with a host of latex-free products for use in patient care. This has helped eliminate a great deal of confusion about which products are safe for use with latex-sensitive individuals. However, despite significant efforts to educate the public and the health care industry regarding latex allergies, considerable misinformation persists. Provision of a completely latex-free environment in most surgical suites may be unrealistic, but every effort should be made to minimize the unnecessary exposure of patients and health care workers to latex allergens in this high-risk arena.

AnaBench: a Web/CORBA-based workbench for biomolecular sequence analysis

PubMed Central

Badidi, Elarbi; De Sousa, Cristina; Lang, B Franz; Burger, Gertraud

2003-01-01

Background Sequence data analyses such as gene identification, structure modeling or phylogenetic tree inference involve a variety of bioinformatics software tools. Due to the heterogeneity of bioinformatics tools in usage and data requirements, scientists spend much effort on technical issues including data format, storage and management of input and output, and memorization of numerous parameters and multi-step analysis procedures. Results In this paper, we present the design and implementation of AnaBench, an interactive, Web-based bioinformatics Analysis workBench allowing streamlined data analysis. Our philosophy was to minimize the technical effort not only for the scientist who uses this environment to analyze data, but also for the administrator who manages and maintains the workbench. With new bioinformatics tools published daily, AnaBench permits easy incorporation of additional tools. This flexibility is achieved by employing a three-tier distributed architecture and recent technologies including CORBA middleware, Java, JDBC, and JSP. A CORBA server permits transparent access to a workbench management database, which stores information about the users, their data, as well as the description of all bioinformatics applications that can be launched from the workbench. Conclusion AnaBench is an efficient and intuitive interactive bioinformatics environment, which offers scientists application-driven, data-driven and protocol-driven analysis approaches. The prototype of AnaBench, managed by a team at the Université de Montréal, is accessible on-line at: . Please contact the authors for details about setting up a local-network AnaBench site elsewhere. PMID:14678565

DOE Office of Scientific and Technical Information (OSTI.GOV)

Del Bianco, M.; Wiehagen, J.

This project evaluated the effectiveness and affordability of integrating retrofit insulated panels into a re-siding project. The Partnership for Home Innovation (PHI) teamed with New York State Energy Research and Development Authority (NYSERDA), the Albany Housing Authority (AHA), and the New York State Weatherization Assistance Program (WAP) administered by Albany Community Action Partnership to demonstrate an energy retrofit and siding upgrade on a two-story, seven unit, multifamily building in Albany New York (CZ 5). The project focused on accomplishing three goals - doubling the existing wall thermal resistance (from approximately R-13 to a weighted average of R-27), reduction of buildingmore » air leakage, and completion of the retrofit within a budget where the additional cost for upgrading wall's thermal resistance is equal to the cost of the standard re-siding effort (i.e., the total cost of the energy efficient re-siding scope of work is not more than double the cost of the standard re-siding effort). Lessons learned from the project strongly indicate that the retrofit panel technology can be installed using common installation practices and with minimal training. Other lessons learned include limitation on the use of standard air sealing materials during cold weather installations and the need to develop better installation guidance for trades working with the level of tolerances that may be present in the existing structure. This technology demonstration showed that exterior retrofit panels provide a viable and reasonable option for the siding trades to increase market opportunities and achieve synergistic benefits for aesthetic upgrades to a building's exterior.« less

Socioeconomic Factors Affecting Local Support for Black Bear Recovery Strategies

NASA Astrophysics Data System (ADS)

Morzillo, Anita T.; Mertig, Angela G.; Hollister, Jeffrey W.; Garner, Nathan; Liu, Jianguo

2010-06-01

There is global interest in recovering locally extirpated carnivore species. Successful efforts to recover Louisiana black bear in Louisiana have prompted interest in recovery throughout the species’ historical range. We evaluated support for three potential black bear recovery strategies prior to public release of a black bear conservation and management plan for eastern Texas, United States. Data were collected from 1,006 residents living in proximity to potential recovery locations, particularly Big Thicket National Preserve. In addition to traditional logistic regression analysis, we used conditional probability analysis to statistically and visually evaluate probabilities of public support for potential black bear recovery strategies based on socioeconomic characteristics. Allowing black bears to repopulate the region on their own (i.e., without active reintroduction) was the recovery strategy with the greatest probability of acceptance. Recovery strategy acceptance was influenced by many socioeconomic factors. Older and long-time local residents were most likely to want to exclude black bears from the area. Concern about the problems that black bears may cause was the only variable significantly related to support or non-support across all strategies. Lack of personal knowledge about black bears was the most frequent reason for uncertainty about preferred strategy. In order to reduce local uncertainty about possible recovery strategies, we suggest that wildlife managers focus outreach efforts on providing local residents with general information about black bears, as well as information pertinent to minimizing the potential for human-black bear conflict.

The Wide-Field Imager for the Parker Solar Probe Mission (WISPR)

NASA Astrophysics Data System (ADS)

Plunkett, S. P.; Howard, R.; Chua, D. H.; Crump, N. A.; Dennison, H.; Korendyke, C.; Linton, M.; Rich, N.; Socker, D. G.; Thernisien, A. F.; Wang, D.; Vourlidas, A.; Baugh, R.; Van Duyne, J. P.; Liewer, P. C.; De Jong, E.; Boies, M. T.; Mikic, Z.; Bothmer, V.; Rochus, P.; Halain, J. P.

2017-12-01

The Parker Solar Probe (PSP) mission will be humanity's first visit to the atmosphere of our nearest star, the Sun, when it is launched in July 2018. PSP will complete 24 orbits between the Sun and Venus with diminishing perihelia reaching as close as 7 million km (9.86 solar radii) from Sun center. In addition to a suite of in-situ probes for the magnetic field, plasma, and energetic particles, the payload includes the Wide Field Imager for Solar Probe (WISPR) that will record unprecedented visible light images of the solar corona and the inner heliosphere. WISPR is the smallest heliospheric imager to date, and comprises two nested wide-field telescopes with large-format (2K x 2K) APS CMOS detectors to optimize the performance over a combined 95º radial by 58º transverse field of view and to minimize the risk of dust damage, which may be considerable close to the Sun. WISPR will discover - in this never-before explored region of the heliosphere - the fundamental nature of coronal structures and the source regions of the solar wind as the PSP flies through them, and will determine whether a dust-free zone exists near the Sun. WISPR has completed its development effort and has been integrated onto the PSP spacecraft. In this paper, we will present our efforts to prepare for the mission including our observing plans and some results of the calibration activities.

Assessing the satisfaction and burden within an academic animal care and use program.

PubMed

Norton, John N; Reynolds, Randall P; Chan, Cliburn; Valdivia, Raphael H; Staats, Herman F

2017-09-01

Although animal research requires adherence to various regulations and standards, the manner in which compliance is maintained and the degree of additional constraints varies between institutions. Regulatory burden, particularly if institutionally imposed, has become a concern for institutions as increased regulatory expectations result in decreased resources available for research efforts. Faculty, research staff, and support staff engaged in animal research were surveyed to determine what institutional animal care and use committee (IACUC) processes were considered burdensome, the perceived value of some suggested modifications, and satisfaction with the IACUC administrative office and the animal resource unit. Although the results revealed overwhelming satisfaction with the IACUC administrative office and the animal resource unit, several IACUC processes were deemed burdensome, and therefore there would be value in modifying IACUC processes. When comparing the value of modifying IACUC processes, different groups within the animal care and use program (ACUP) tended to have different responses on many of the topics. This survey identified several perceived burdensome IACUC processes that would likely benefit individuals if modified. In today's environment of shrinking budgets for biomedical research, minimizing regulatory burden-particularly unnecessary, self-imposed burden-in the ACUP is particularly important to ensure that costs, time, and effort are appropriate to achieve animal welfare and quality of research endeavors.-Norton, J. N., Reynolds, R. P., Chan, C., Valdivia, R. H., Staats, H. F. Assessing the satisfaction and burden within an academic animal care and use program. © FASEB.

Changes in fish communities following recolonization of the Cedar river, Wa, USA by Pacific salmon after 103 years of local extirpation

USGS Publications Warehouse

Kiffney, P.M.; Pess, G.R.; Anderson, J.H.; Faulds, P.; Burton, Kenneth; Riley, S.C.

2009-01-01

Migration barriers are a major reason for species loss and population decline of freshwater organisms. Significant efforts have been made to remove or provide passage around these barriers; however, our understanding of the ecological effects of these efforts is minimal. Installation of a fish passage facility at the Landsburg Dam, WA, USA provided migratory fish access to habitat from which they had been excluded for over 100 years. Relying on voluntary recruitment, we examined the effectiveness of this facility in restoring coho (Oncorhynchus kisutch) salmon populations above the diversion, and whether reintroduction of native anadromous species affected the distribution and abundance of resident trout (O. mykiss and O. clarki). Before the ladder, late summer total salmonid (trout only) density increased with distance from the dam. This pattern was reversed after the ladder was opened, as total salmonid density (salmon {thorn} trout) approximately doubled in the three reaches closest to the dam. These changes were primarily due to the addition of coho, but small trout density also increased in lower reaches and decreased in upper reaches. A nearby source population, dispersal by adults and juveniles, low density of resident trout and high quality habitat above the barrier likely promoted rapid colonization of targeted species. Our results suggest that barrier removal creates an opportunity for migratory species to re-establish populations leading to range expansion and potentially to increased population size. ?? 2008 John Wiley & Sons, Ltd.

High-resolution modeling assessment of tidal stream resource in Western Passage of Maine, USA

NASA Astrophysics Data System (ADS)

Yang, Zhaoqing; Wang, Taiping; Feng, Xi; Xue, Huijie; Kilcher, Levi

2017-04-01

Although significant efforts have been taken to assess the maximum potential of tidal stream energy at system-wide scale, accurate assessment of tidal stream energy resource at project design scale requires detailed hydrodynamic simulations using high-resolution three-dimensional (3-D) numerical models. Extended model validation against high quality measured data is essential to minimize the uncertainties of the resource assessment. Western Passage in the State of Maine in U.S. has been identified as one of the top ranking sites for tidal stream energy development in U.S. coastal waters, based on a number of criteria including tidal power density, market value and transmission distance. This study presents an on-going modeling effort for simulating the tidal hydrodynamics in Western Passage using the 3-D unstructured-grid Finite Volume Community Ocean Model (FVCOM). The model domain covers a large region including the entire the Bay of Fundy with grid resolution varies from 20 m in the Western Passage to approximately 1000 m along the open boundary near the mouth of Bay of Fundy. Preliminary model validation was conducted using existing NOAA measurements within the model domain. Spatial distributions of tidal power density were calculated and extractable tidal energy was estimated using a tidal turbine module embedded in FVCOM under different tidal farm scenarios. Additional field measurements to characterize resource and support model validation were discussed. This study provides an example of high resolution resource assessment based on the guidance recommended by the International Electrotechnical Commission Technical Specification.

Life-history tactics: a review of the ideas.

PubMed

Stearns, S C

1976-03-01

This review organizes ideas on the evolution of life histories. The key life-history traits are brood size, size of young, the age distribution of reproductive effort, the interaction of reproductive effort with adult mortality, and the variation in these traits among an individual's progeny. The general theoretical problem is to predict which combinations of traits will evolve in organisms living in specified circumstances. First consider single traits. Theorists have made the following predictions: (1) Where adult exceeds juvenile mortality, the organism should reproduce only once in its lifetime. Where juvenile exceeds adult mortality, the organism should reproduce several times. (2) Brood size should macimize the number of young surviving to maturity, summed over the lifetime of the parent. But when optimum brood-size unpredictably in time, smaller broods should be favored because they decrease the chances of total failure on a given attempt. (3) In expanding populations, selection should minimize age at maturity. In stable populations, when reproductive success depends on size, age, or social status, or when adult exceeds juvenile mortality, then maturation should be delayed, as it should be in declining populations. (4) Young should increase in size at birth with increased predation risk, and decrease in size with increased resource availability. Theorists have also predicted that only particular combinations of traits should occur in specified circumstances. (5) In growing populations, age at maturity should be minimized, reproductive effort concentrated early in life, and brood size increased. (6) One view holds that in stable environments, late maturity, broods, a few, large young, parental care, and small reproductive efforts should be favored (K-selection). In fluctuating environments, early maturity, many small young, reduced parental care, and large reproductive efforts should be favored (r-selection). (7) But another view holds that when juvenile mortality fluctuates more than adult mortality, the traits associated with stable and fluctuating environments should be reversed. We need experiments that test the assumptions and predictions reviewed here, more comprehensive theory that makes more readily falsifiable predictions, and examination of different definitions of fitness.

Promoting appreciation of the study and practice of medicine: inner workings of a Mini-Med program.

PubMed

Lindenthal, Jacob Jay; Delisa, Joel A

2012-01-01

Dissatisfaction with the restrictions of the health care system, diminished reliance on the word of health care professionals, increased costs of medical care, and access to information online have increased consumers' interest in their own health care as well as their thirst for medical literacy. Mini-Med programs run by medical schools offer a more reliable method of learning about disease and disorders than does the indiscriminate surfing of the Internet. This article describes the efforts of the University of Medicine and Dentistry of New Jersey - the largest public university of the health sciences in the nation - to run and maintain such a program. The Mini-Med course provides lay students with insight into what a student undergoes while studying medicine and guides them through complex topics that range from anatomy and basic life support to the latest in stem cell research. It also provides early guidance for potential medical students, addresses patients' concerns, and gives some insight into the levels of comprehension of current medical students.

Control Allocation with Load Balancing

NASA Technical Reports Server (NTRS)

Bodson, Marc; Frost, Susan A.

2009-01-01

Next generation aircraft with a large number of actuators will require advanced control allocation methods to compute the actuator commands needed to follow desired trajectories while respecting system constraints. Previously, algorithms were proposed to minimize the l1 or l2 norms of the tracking error and of the actuator deflections. The paper discusses the alternative choice of the l(infinity) norm, or sup norm. Minimization of the control effort translates into the minimization of the maximum actuator deflection (min-max optimization). The paper shows how the problem can be solved effectively by converting it into a linear program and solving it using a simplex algorithm. Properties of the algorithm are also investigated through examples. In particular, the min-max criterion results in a type of load balancing, where the load is th desired command and the algorithm balances this load among various actuators. The solution using the l(infinity) norm also results in better robustness to failures and to lower sensitivity to nonlinearities in illustrative examples.

Evaluating the Magnitude and Duration of Cold Load Pick-up on Residential Distribution Feeders Using Multi-State Load Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schneider, Kevin P.; Sortomme, Eric; Venkata, S. S.

The increased level of demand that is associated with the restoration of service after an outage, Cold Load Pick-Up (CLPU), can be significantly higher than pre-outage levels, even exceeding the normal distribution feeder peak demand. These high levels of demand can delay restoration efforts and in extreme cases damage equipment. The negative impacts of CLPU can be mitigated with strategies that restore the feeder in sections, minimizing the load current. The challenge for utilities is to manage the current level on critical equipment while minimizing the time to restore service to all customers. Accurately modeling CLPU events is the firstmore » step in developing improved restoration strategies that minimize restoration times. This paper presents a new method for evaluating the magnitude of the CLPU peak, and its duration, using multi-state load models. The use of multi-state load models allows for a more accurate representation of the end-use loads that are present on residential distribution feeders.« less

Space station preliminary design report

NASA Technical Reports Server (NTRS)

1982-01-01

The results of a 3 month preliminary design and analysis effort is presented. The configuration that emerged consists of a very stiff deployable truss structure with an overall triangular cross section having universal modules attached at the apexes. Sufficient analysis was performed to show feasibility of the configuration. An evaluation of the structure shows that desirable attributes of the configuration are: (1) the solar cells, radiators, and antennas will be mounted to stiff structure to minimize control problems during orbit maintenance and correction, docking, and attitude control; (2) large flat areas are available for mounting and servicing of equipment; (3) Large mass items can be mounted near the center of gravity of the system to minimize gravity gradient torques; (4) the trusses are lightweight structures and can be transported into orbit in one Shuttle flight; (5) the trusses are expandable and will require a minimum of EVA; and (6) the modules are anticipated to be structurally identical except for internal equipment to minimize cost.

Hydrodynamically induced oscillations and traffic dynamics in 1D microfludic networks

NASA Astrophysics Data System (ADS)

Bartolo, Denis; Jeanneret, Raphael

2011-03-01

We report on the traffic dynamics of particles driven through a minimal microfluidic network. Even in the minimal network consisting in a single loop, the traffic dynamics has proven to yield complex temporal patterns, including periodic, multi-periodic or chaotic sequences. This complex dynamics arises from the strongly nonlinear hydrodynamic interactions between the particles, that takes place at a junction. To better understand the consequences of this nontrivial coupling, we combined theoretical, numerical and experimental efforts and solved the 3-body problem in a 1D loop network. This apparently simple dynamical system revealed a rich and unexpected dynamics, including coherent spontaneous oscillations along closed orbits. Striking similarities between Hamiltonian systems and this driven dissipative system will be explained.