30 CFR 250.1163 - How must I measure gas flaring or venting volumes and liquid hydrocarbon burning volumes, and...

Code of Federal Regulations, 2014 CFR

2014-07-01

..., gas vented, and liquid hydrocarbons burned, to Office of Natural Resources Revenue on Form ONRR-4054... records detailing gas flaring, gas venting, and liquid hydrocarbon burning for each facility for 6 years... minimum: (i) Daily volumes of gas flared, gas vented, and liquid hydrocarbons burned; (ii) Number of hours...

Pre-main Sequence Evolution and the Hydrogen-Burning Minimum Mass

NASA Astrophysics Data System (ADS)

Nakano, Takenori

There is a lower limit to the mass of the main-sequence stars (the hydrogen-burning minimum mass) below which the stars cannot replenish the energy lost from their surfaces with the energy released by the hydrogen burning in their cores. This is caused by the electron degeneracy in the stars which suppresses the increase of the central temperature with contraction. To find out the lower limit we need the accurate knowledge of the pre-main sequence evolution of very low-mass stars in which the effect of electron degeneracy is important. We review how Hayashi and Nakano (1963) carried out the first determination of this limit.

40 CFR Table 2 to Subpart Ddddd of... - Emission Limits for Existing Boilers and Process Heaters

Code of Federal Regulations, 2014 CFR

2014-07-01

... collect a minimum of 3 dscm. 2. Units design to burn coal/solid fossil fuel a. Filterable PM (or TSM) 4.0E... minimum of 2 dscm per run. 3. Pulverized coal boilers designed to burn coal/solid fossil fuel a. CO (or.../solid fossil fuel a. CO (or CEMS) 160 ppm by volume on a dry basis corrected to 3 percent oxygen, 3-run...

Lump wood combustion process

NASA Astrophysics Data System (ADS)

Kubesa, Petr; Horák, Jiří; Branc, Michal; Krpec, Kamil; Hopan, František; Koloničný, Jan; Ochodek, Tadeáš; Drastichová, Vendula; Martiník, Lubomír; Malcho, Milan

2014-08-01

The article deals with the combustion process for lump wood in low-power fireplaces (units to dozens of kW). Such a combustion process is cyclical in its nature, and what combustion facility users are most interested in is the frequency, at which fuel needs to be stoked to the fireplace. The paper defines the basic terms such as burnout curve and burning rate curve, which are closely related to the stocking frequency. The fuel burning rate is directly dependent on the immediate thermal power of the fireplace. This is also related to the temperature achieved in the fireplace, magnitude of flue gas losses and the ability to generate conditions favouring the full burnout of the fuel's combustible component, which, at once ensures the minimum production of combustible pollutants. Another part of the paper describes experiments conducted in traditional fireplaces with a grate, at which well-dried lump wood was combusted.

Minimum deltaV Burn Planning for the International Space Station Using a Hybrid Optimization Technique, Level 1

NASA Technical Reports Server (NTRS)

Brown, Aaron J.

2015-01-01

The International Space Station's (ISS) trajectory is coordinated and executed by the Trajectory Operations and Planning (TOPO) group at NASA's Johnson Space Center. TOPO group personnel routinely generate look-ahead trajectories for the ISS that incorporate translation burns needed to maintain its orbit over the next three to twelve months. The burns are modeled as in-plane, horizontal burns, and must meet operational trajectory constraints imposed by both NASA and the Russian Space Agency. In generating these trajectories, TOPO personnel must determine the number of burns to model, each burn's Time of Ignition (TIG), and magnitude (i.e. deltaV) that meet these constraints. The current process for targeting these burns is manually intensive, and does not take advantage of more modern techniques that can reduce the workload needed to find feasible burn solutions, i.e. solutions that simply meet the constraints, or provide optimal burn solutions that minimize the total DeltaV while simultaneously meeting the constraints. A two-level, hybrid optimization technique is proposed to find both feasible and globally optimal burn solutions for ISS trajectory planning. For optimal solutions, the technique breaks the optimization problem into two distinct sub-problems, one for choosing the optimal number of burns and each burn's optimal TIG, and the other for computing the minimum total deltaV burn solution that satisfies the trajectory constraints. Each of the two aforementioned levels uses a different optimization algorithm to solve one of the sub-problems, giving rise to a hybrid technique. Level 2, or the outer level, uses a genetic algorithm to select the number of burns and each burn's TIG. Level 1, or the inner level, uses the burn TIGs from Level 2 in a sequential quadratic programming (SQP) algorithm to compute a minimum total deltaV burn solution subject to the trajectory constraints. The total deltaV from Level 1 is then used as a fitness function by the genetic algorithm in Level 2 to select the number of burns and their TIGs for the next generation. In this manner, the two levels solve their respective sub-problems separately but collaboratively until a burn solution is found that globally minimizes the deltaV across the entire trajectory. Feasible solutions can also be found by simply using the SQP algorithm in Level 1 with a zero cost function. This paper discusses the formulation of the Level 1 sub-problem and the development of a prototype software tool to solve it. The Level 2 sub-problem will be discussed in a future work. Following the Level 1 formulation and solution, several look-ahead trajectory examples for the ISS are explored. In each case, the burn targeting results using the current process are compared against a feasible solution found using Level 1 in the proposed technique. Level 1 is then used to find a minimum deltaV solution given the fixed number of burns and burn TIGs. The optimal solution is compared with the previously found feasible solution to determine the deltaV (and therefore propellant) savings. The proposed technique seeks to both improve the current process for targeting ISS burns, and to add the capability to optimize ISS burns in a novel fashion. The optimal solutions found using this technique can potentially save hundreds of kilograms of propellant over the course of the ISS mission compared to feasible solutions alone. While the software tool being developed to implement this technique is specific to ISS, the concept is extensible to other long-duration, central-body orbiting missions that must perform orbit maintenance burns to meet operational trajectory constraints.

Forward-looking infrared imaging predicts ultimate burn depth in a porcine vertical injury progression model.

PubMed

Miccio, Joseph; Parikh, Shruti; Marinaro, Xavier; Prasad, Atulya; McClain, Steven; Singer, Adam J; Clark, Richard A F

2016-03-01

Current methods of assessing burn depth are limited and are primarily based on visual assessments by burn surgeons. This technique has been shown to have only 60% accuracy and a more accurate, simple, noninvasive method is needed to determine burn wound depth. Forward-looking infrared (FLIR) thermography is both noninvasive and user-friendly with the potential to rapidly assess burn depth. The purpose of this paper is to determine if early changes in burn temperature (first 3 days) can be a predictor of burn depth as assessed by vertical scarring 28 days after injury. While under general anesthesia, 20 burns were created on the backs of two female Yorkshire swine using a 2.5cm×2.5cm×7.5cm, 150g aluminum bar, for a total of 40 burns. FLIR imaging was performed at both early (1, 2 and 3 days) and late (7, 10, 14, 17, 21, 24 and 28 days) time points. Burns were imaged from a height of 12 inches from the skin surface. FLIR ExaminIR(©) software was used to examine the infrared thermographs. One hundred temperature points from burn edge to edge across the center of the burn were collected for each burn at all time points and were exported as a comma-separated values (CSV) file. The CSV file was processed and analyzed using a MATLAB program. The temperature profiles through the center of the burns generated parabola-like curves. The lowest temperature (temperature minimum) and a line midway between the temperature minimum and ambient skin temperature at the burn edges was defined and the area of the curve calculated (the "temperature half-area"). Half-area values 2 days after burn had higher correlations with scar depth than did the minimum temperatures. However, burns that became warmer from 1 day to 2 days after injury had a lower scar depth then burns that became cooler and this trend was best predicted by temperature minima. When data were analyzed as a diagnostic test for sensitivity and specificity using >3mm scarring, i.e. a full-thickness burn, as a clinically relevant criterion standard, temperature minima at 2 days after burn was found to be the most sensitive and specific test. FLIR imaging is a fast and simple tool that has been shown to predict burn wound outcome in a porcine vertical injury progression model. Data showed that more severe burn wounds get cooler between 1 and 2 days after burn. We found four analytic methods of FLIR images that were predictive of burn progression at 1 and 2 days after burn; however, temperature minima 2 days after burn appeared to be the best predictive test for injury progression to a full-thickness burn. Although these results must be validated in clinical studies, FLIR imaging has the potential to aid clinicians in assessing burn severity and thereby assisting in burn wound management. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Strategies for Choosing Descent Flight-Path Angles for Small Jets

NASA Technical Reports Server (NTRS)

Wu, Minghong Gilbert; Green, Steven M.

2012-01-01

Three candidate strategies for choosing the descent flight path angle (FPA) for small jets are proposed, analyzed, and compared for fuel efficiency under arrival metering conditions. The strategies vary in operational complexity from a universally fixed FPA, or FPA function that varies with descent speed for improved fuel efficiency, to the minimum-fuel FPA computed for each flight based on winds, route, and speed profile. Methodologies for selecting the parameter for the first two strategies are described. The differences in fuel burn are analyzed over a year s worth of arrival traffic and atmospheric conditions recorded for the Dallas/Fort Worth (DFW) Airport during 2011. The results show that the universally fixed FPA strategy (same FPA for all flights, all year) burns on average 26 lbs more fuel per flight as compared to the minimum-fuel solution. This FPA is adapted to the arrival gate (direction of entry to the terminal) and various timespans (season, month and day) to improve fuel efficiency. Compared to a typical FPA of approximately 3 degrees the adapted FPAs vary significantly, up to 1.3 from one arrival gate to another or up to 1.4 from one day to another. Adapting the universally fixed FPA strategy to the arrival gate or to each day reduces the extra fuel burn relative to the minimum-fuel solution by 27% and 34%, respectively. The adaptations to gate and time combined shows up to 57% reduction of the extra fuel burn. The second strategy, an FPA function, contributes a 17% reduction in the 26 lbs of extra fuel burn over the universally fixed FPA strategy. Compared to the corresponding adaptations of the universally fixed FPA, adaptations of the FPA function reduce the extra fuel burn anywhere from 15-23% depending on the extent of adaptation. The combined effect of the FPA function strategy with both directional and temporal adaptation recovers 67% of the extra fuel relative to the minimum-fuel solution.

Effectiveness of medical hypnosis for pain reduction and faster wound healing in pediatric acute burn injury: study protocol for a randomized controlled trial.

PubMed

Chester, Stephen J; Stockton, Kellie; De Young, Alexandra; Kipping, Belinda; Tyack, Zephanie; Griffin, Bronwyn; Chester, Ralph L; Kimble, Roy M

2016-04-29

Burns and the associated wound care procedures can be extremely painful and anxiety-provoking for children. Burn injured children and adolescents are therefore at greater risk of experiencing a range of psychological reactions, in particular posttraumatic stress disorder, which can persist for months to years after the injury. Non-pharmacological intervention is critical for comprehensive pain and anxiety management and is used alongside pharmacological analgesia and anxiolysis. However, effective non-pharmacological pain and anxiety management during pediatric burn procedures is an area still needing improvement. Medical hypnosis has received support as a technique for effectively decreasing pain and anxiety levels in adults undergoing burn wound care and in children during a variety of painful medical procedures (e.g., bone marrow aspirations, lumbar punctures, voiding cystourethrograms, and post-surgical pain). Pain reduction during burn wound care procedures is linked with improved wound healing rates. To date, no randomized controlled trials have investigated the use of medical hypnosis in pediatric burn populations. Therefore this study aims to determine if medical hypnosis decreases pain, anxiety, and biological stress markers during wound care procedures; improves wound healing times; and decreases rates of traumatic stress reactions in pediatric burn patients. This is a single-center, superiority, parallel-group, prospective randomized controlled trial. Children (4 to 16 years, inclusive) with acute burn injuries presenting for their first dressing application or change are randomly assigned to either the (1) intervention group (medical hypnosis) or (2) control group (standard care). A minimum of 33 participants are recruited for each treatment group. Repeated measures of pain, anxiety, stress, and wound healing are taken at every dressing change until ≥95 % wound re-epithelialization. Further data collection assesses impact on posttraumatic stress symptomatology, speed of wound healing, and parent perception of how easy the dressing change is for their child. Study results will elucidate whether the disease process can be changed by using medical hypnosis with children to decrease pain, anxiety, and stress in the context of acute burn wounds. Australian New Zealand Clinical Trials Registry ACTRN12615000419561.

A Fuel-Efficient Conflict Resolution Maneuver for Separation Assurance

NASA Technical Reports Server (NTRS)

Bowe, Aisha Ruth; Santiago, Confesor

2012-01-01

Automated separation assurance algorithms are envisioned to play an integral role in accommodating the forecasted increase in demand of the National Airspace System. Developing a robust, reliable, air traffic management system involves safely increasing efficiency and throughput while considering the potential impact on users. This experiment seeks to evaluate the benefit of augmenting a conflict detection and resolution algorithm to consider a fuel efficient, Zero-Delay Direct-To maneuver, when resolving a given conflict based on either minimum fuel burn or minimum delay. A total of twelve conditions were tested in a fast-time simulation conducted in three airspace regions with mixed aircraft types and light weather. Results show that inclusion of this maneuver has no appreciable effect on the ability of the algorithm to safely detect and resolve conflicts. The results further suggest that enabling the Zero-Delay Direct-To maneuver significantly increases the cumulative fuel burn savings when choosing resolution based on minimum fuel burn while marginally increasing the average delay per resolution.

Comparison of three different dressings for partial thickness burns in children: study protocol for a randomised controlled trial.

PubMed

Gee Kee, Emma; Kimble, Roy M; Cuttle, Leila; Stockton, Kellie

2013-11-25

In the paediatric population, pain and distress associated with burn injuries during wound care procedures remain a constant challenge. Although silver dressings are the gold standard for burn care in Australasia, very few high-level trials have been conducted that compare silver dressings to determine which will provide the best level of care clinically. Therefore, for paediatric patients in particular, identifying silver dressings that are associated with lower levels of pain and rapid wound re-epithelialisation is imperative. This study will determine whether there is a difference in time to re-epithelialisation and pain and distress experienced during wound care procedures among Acticoat™, Acticoat™ combined with Mepitel™ and Mepilex Ag™ dressings for acute, paediatric partial thickness burns. Children aged 0 to 15 years with an acute partial thickness (superficial partial to deep partial thickness inclusive) burn injury and a burn total body surface area of ≤ 10% will be eligible for the trial. Patients will be randomised to one of the three dressing groups: (1) Acticoat™ or (2) Acticoat™ combined with Mepitel™ or (3) Mepilex Ag™. A minimum of 28 participants will be recruited for each treatment group. Primary measures of pain, distress and healing will be repeated at each dressing change until complete wound re-epithelialisation occurs or skin grafting is required. Additional data collected will include infection status at each dressing change, physical function, scar outcome and scar management requirements, cost effectiveness of each dressing and staff perspectives of the dressings. The results of this study will determine the effects of three commonly used silver and silicone burn dressing combinations on the rate of wound re-epithelialisation and pain experienced during dressing procedures in acute, paediatric partial thickness burn injuries. Australian New Zealand Clinical Trials Registry ACTRN12613000105741.

On the use of the (V,W) Burn-Sensitive Vegetation Index System to monitor the spatiotemporal distribution of burned areas in Portugal

NASA Astrophysics Data System (ADS)

DaCamara, Carlos; Libonati, Renata; Calado, Teresa; Ermida, Sofia; Nunes, Sílvia

2017-04-01

The use of remotely sensed information for burned area detection is well established and there is a general consensus about its usefulness from global down to regional levels. In this particular, the combined use of near and middle infrared (NIR and MIR) channels has shown to be particularly suitable to discriminate burned areas in a variety of ecosystems. The so-called (V,W) system [1,2] is a burn-sensitive vegetation index system defined in a transformed NIR-MIR space that has proven to be capable of discriminating burned pixels in the Brazilian biomes. A procedure based on the (V,W) system is here presented that allows discriminating burned areas and dating burning events. The procedure is tested over Portugal using NIR and MIR data from the Terra/Aqua MODIS Level 1B 1 km V5 product (MOD021/MYD021) together with active fire data from the MODIS V5 product Thermal Anomalies/Fire 5-Min L2 Swath 1km (MOD14/ MYD14). First monthly minimum composites of W are computed for July and August 2015. Burned pixels are then identified as the ones that are located close to hot spots (detected during August) and that present low values of composited minimum of W in August (characteristic of a burning event) together with a sharp decrease of composited minimum of W from July to August (that is expected to occur after a burning event). Burned pixels are then successively identified by a seeded region-growing algorithm. The day of burning of each pixel classified as burned is finally identified as the one that maximizes an index of temporal separability computed along the respective time series of available values of W in August. Results obtained are validated using as reference burned scars and dates as identified by the Rapid Damage Assessment (RDA) module developed by the European Forest Fire Information System (EFFIS); the EFFIS mapping process consists of an unsupervised procedure that uses MODIS bands at 250 m resolution combined with information from the CORINE Land Cover, followed by a seeded region-growing algorithm [3]. Almost half (49%) of the burned pixels are correctly identified, less than one fifth (18%) are false alarms and the total burned area is overestimated by 18%. On the other hand more than three fourths (76%) of estimated days of burning presented deviations from reference data between -1 and 4 days. Performance of the proposed algorithm is to be viewed as highly satisfactory taking into account the coarser resolution of the procedure being validated (1 km) compared to the reference data (250 m). Research was performed in the framework of FAPESP/FCT BrFLAS Project and of LSA SAF. [1] Libonati et al. (2011), Remote Sensing of Environment, 115(6), 1464-1477. [2] DaCamara et al. (2016), IEEE Geoscience and Remote Sensing Letters 13(12), 1822-1826. [3] Salvador Civil & San-Miguel-Ayanz (2002), International Journal of Remote Sensing, 23(6), 1197-1205.

Determination of Optimal Amikacin Dosing Regimens for Pediatric Patients With Burn Wound Sepsis.

PubMed

Yu, Tian; Stockmann, Chris; Healy, Daniel P; Olson, Jared; Wead, Stephanie; Neely, Alice N; Kagan, Richard J; Spigarelli, Michael G; Sherwin, Catherine M T

2015-01-01

This study aimed to develop optimal amikacin dosing regimens for the empirical treatment of Gram-negative bacterial sepsis in pediatric patients with burn injuries. A pharmacodynamic (PD) target in which the peak concentration (Cmax) is ≥8 times the minimum inhibitory concentration (MIC) (Cmax/MIC ≥ 8) is reflective of optimal bactericidal activity and has been used to predict clinical outcomes. Population pharmacokinetic modeling was performed in NONMEM 7.2 for pediatric patients with and without burn injuries. Amikacin pharmacokinetic parameters were compared between the two groups and multiple dosing regimens were simulated using MATLAB to achieve the PD target in ≥90% of patients with burn injuries. The pharmacokinetic analysis included 282 amikacin concentrations from 70 pediatric patients with burn injuries and 99 concentrations from 32 pediatric patients without burns. A one-compartment model with first-order elimination described amikacin pharmacokinetics well for both groups. Clearance (CL) was significantly higher in patients with burn injuries than in patients without (7.22 vs 5.36 L/h, P < .001). The volume of distribution (V) was also significantly increased in patients with burn injuries (22.7 vs 18.7 L, P < .01). Weight significantly influenced amikacin CL (P < .001) and V (P < .001) for both groups. Model-based simulations showed that a higher amikacin dose (≥25 mg/kg) achieved a Cmax/MIC ≥8 in ≥90% of patients with assumed infections of organisms with an MIC = 8 mg/L. Amikacin pharmacokinetics are altered in patients with burn injuries, including a significant increase in CL and V. In simulations, increased doses (≥25 mg/kg) led to improved PD target attainment rates. Further clinical evaluation of this proposed dosing regimen is warranted to assess clinical and microbiological outcomes in pediatric patients with burn wound sepsis.

7 CFR 29.6104 - Rule 18.

Code of Federal Regulations, 2014 CFR

2014-01-01

... INSPECTION Standards Rules § 29.6104 Rule 18. Burn shall be determined as the average burning time of leaves selected at random from the sample. A minimum of 10 leaves shall be selected as representative regardless... on the same side of the leaf. The leaf shall be punctured to permit quick ignition when placed over a...

7 CFR 29.6104 - Rule 18.

Code of Federal Regulations, 2010 CFR

2010-01-01

... INSPECTION Standards Rules § 29.6104 Rule 18. Burn shall be determined as the average burning time of leaves selected at random from the sample. A minimum of 10 leaves shall be selected as representative regardless... on the same side of the leaf. The leaf shall be punctured to permit quick ignition when placed over a...

7 CFR 29.6104 - Rule 18.

Code of Federal Regulations, 2013 CFR

2013-01-01

... INSPECTION Standards Rules § 29.6104 Rule 18. Burn shall be determined as the average burning time of leaves selected at random from the sample. A minimum of 10 leaves shall be selected as representative regardless... on the same side of the leaf. The leaf shall be punctured to permit quick ignition when placed over a...

7 CFR 29.6104 - Rule 18.

Code of Federal Regulations, 2011 CFR

2011-01-01

... INSPECTION Standards Rules § 29.6104 Rule 18. Burn shall be determined as the average burning time of leaves selected at random from the sample. A minimum of 10 leaves shall be selected as representative regardless... on the same side of the leaf. The leaf shall be punctured to permit quick ignition when placed over a...

7 CFR 29.6104 - Rule 18.

Code of Federal Regulations, 2012 CFR

2012-01-01

... INSPECTION Standards Rules § 29.6104 Rule 18. Burn shall be determined as the average burning time of leaves selected at random from the sample. A minimum of 10 leaves shall be selected as representative regardless... on the same side of the leaf. The leaf shall be punctured to permit quick ignition when placed over a...

Continuous spin detonation of poorly detonable fuel-air mixtures in annular combustors

NASA Astrophysics Data System (ADS)

Bykovskii, F. A.; Zhdan, S. A.

2017-09-01

This paper reports on the results of experimental investigations of continuous spin detonation of three fuel-air mixtures (syngas-air, CH4/H2-air, and kerosene/H2-air in a flow-type annular cylindrical combustor 503 mm in diameter. The limits of existence of continuous detonation in terms of the specific flow rates of the mixtures (minimum values) are determined. It is found that all gas mixtures, including the least detonable methane-air mixture, with addition of hydrogen can be burned in the continuous spin detonation regime.

Optimal Trajectories For Orbital Transfers Using Low And Medium Thrust Propulsion Systems

NASA Technical Reports Server (NTRS)

Cobb, Shannon S.

1992-01-01

For many problems it is reasonable to expect that the minimum time solution is also the minimum fuel solution. However, if one allows the propulsion system to be turned off and back on, it is clear that these two solutions may differ. In general, high thrust transfers resemble the well-known impulsive transfers where the burn arcs are of very short duration. The low and medium thrust transfers differ in that their thrust acceleration levels yield longer burn arcs which will require more revolutions, thus making the low thrust transfer computational intensive. Here, we consider optimal low and medium thrust orbital transfers.

Thermal design and analysis of a hydrogen-burning wind tunnel model of an airframe-integrated scramjet

NASA Technical Reports Server (NTRS)

Guy, R. W.; Mueller, J. N.; Pinckney, S. Z.; Lee, L. P.

1976-01-01

An aerodynamic model of a hydrogen burning, airframe integrated scramjet engine has been designed, fabricated, and instrumented. This model is to be tested in an electric arc heated wind tunnel at an altitude of 35.39 km (116,094 ft.) but with an inlet Mach number of 6 simulating precompression on an aircraft undersurface. The scramjet model is constructed from oxygen free, high conductivity copper and is a heat sink design except for water cooling in some critical locations. The model is instrumented for pressure, surface temperature, heat transfer rate, and thrust measurements. Calculated flow properties, heat transfer rates, and surface temperature distributions along the various engine components are included for the conditions stated above. For some components, estimates of thermal strain are presented which indicate significant reductions in plastic strain by selective cooling of the model. These results show that the 100 thermal cycle life of the engine was met with minimum distortion while staying within the 2669 N (600 lbf) engine weight limitation and while cooling the engine only in critical locations.

Charring temperatures are driven by the fuel types burned in a peatland wildfire

PubMed Central

Hudspith, Victoria A.; Belcher, Claire M.; Yearsley, Jonathan M.

2014-01-01

Peatlands represent a globally important carbon store; however, the human exploitation of this ecosystem is increasing both the frequency and severity of fires on drained peatlands. Yet, the interactions between the hydrological conditions (ecotopes), the fuel types being burned, the burn severity, and the charring temperatures (pyrolysis intensity) remain poorly understood. Here we present a post-burn assessment of a fire on a lowland raised bog in Co. Offaly, Ireland (All Saints Bog). Three burn severities were identified in the field (light, moderate, and deeply burned), and surface charcoals were taken from 17 sites across all burn severities. Charcoals were classified into two fuel type categories (either ground or aboveground fuel) and the reflectance of each charcoal particle was measured under oil using reflectance microscopy. Charcoal reflectance shows a positive relationship with charring temperature and as such can be used as a temperature proxy to reconstruct minimum charring temperatures after a fire event. Resulting median reflectance values for ground fuels are 1.09 ± 0.32%Romedian, corresponding to estimated minimum charring temperatures of 447°C ± 49°C. In contrast, the median charring temperatures of aboveground fuels were found to be considerably higher, 646°C ± 73°C (3.58 ± 0.77%Romedian). A mixed-effects modeling approach was used to demonstrate that the interaction effects of burn severity, as well as ecotope classes, on the charcoal reflectance is small compared to the main effect of fuel type. Our findings reveal that the different fuel types on raised bogs are capable of charring at different temperatures within the same fire, and that the pyrolysis intensity of the fire on All Saints Bog was primarily driven by the fuel types burning, with only a weak association to the burn severity or ecotope classes. PMID:25566288

Development a minimum data set of the information management system for burns.

PubMed

Ahmadi, Maryam; Alipour, Jahanpour; Mohammadi, Ali; Khorami, Farid

2015-08-01

Burns are the most common and destructive injuries in across of the world and especially in developing countries. Nevertheless, a standard tool for collecting the data of burn injury has not been developed yet. The purpose of this study was to develop a minimum data set (MDS) of the information management system for burns in Iran. This descriptive and cross-sectional study was performed in 2014. Data were collected from hospitals affiliated with Hormozgan and Iran University of Medical Sciences and medical documents centers, emergency centers and legal medicine centers located in Bandar Abbas city, in addition to internet access and library. Investigated documents were burn injury records in 2013, and documents that retrieved from the internet, and printed materials. Records were selected randomly based on T20-T29 categories from ICD-10. Data were collected using a checklist. In order to make a consensus about the data elements the decision Delphi technique was applied using a questionnaire. The content validity and reliability of questionnaire were assessed by expert's opinions and test-retest method, respectively. An MDS of burns was developed. This MDS divided into two categories: administrative and clinical with six and 17 section and 161 and 311 data elements respectively. This study showed that comprehensive and uniform data elements about burns do not exist in Iran. Therefore a MDS was developed for burns in Iran. Development of an MDS will result in standardization and effective management of the data through providing uniform and comprehensive data elements for burns. Thus, comparability of the extracted information from different analyses and researches will be possible in various levels. In addition, establishment of policies and prevention and control of burns will be possible, which results in the improvement of the quality of care and containment of costs. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Nitramine propellants. [gun propellant burning rate

NASA Technical Reports Server (NTRS)

Cohen, N. S.; Strand, L. D. (Inventor)

1978-01-01

Nitramine propellants without a pressure exponent shift in the burning rate curves are prepared by matching the burning rate of a selected nitramine or combination of nitramines within 10% of burning rate of a plasticized active binder so as to smooth out the break point appearance in the burning rate curve.

Low thrust optimal orbital transfers

NASA Technical Reports Server (NTRS)

Cobb, Shannon S.

1994-01-01

For many optimal transfer problems it is reasonable to expect that the minimum time solution is also the minimum fuel solution. However, if one allows the propulsion system to be turned off and back on, it is clear that these two solutions may differ. In general, high thrust transfers resemble the well known impulsive transfers where the burn arcs are of very short duration. The low and medium thrust transfers differ in that their thrust acceleration levels yield longer burn arcs and thus will require more revolutions. In this research, we considered two approaches for solving this problem: a powered flight guidance algorithm previously developed for higher thrust transfers was modified and an 'averaging technique' was investigated.

Control Techtronics International

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, J.

1995-12-31

Polish graded coal can be burned in existing stoker boilers and meet the 1998 Air Quality standard. This is accomplished with the Control Techtronics microprocessor-based combustion controller accurately and repeatedly: (a) matching the combustion air to the coal firing rate, with continuous stack sensor feedback; (b) continuously varying the boiler`s firing rate based on output water temperature or steam pressure; (c) continuously varying the exhaust fan`s speed to maintain minimum negative pressure in the boiler`s combustion chamber; and recirculating a portion of the flue gas, at varying amounts throughout the boiler`s firing rate. Systems for five boilers have been installedmore » and are operating on MPEC`s Balicka plant in Krakow. Control Techtronics International has $10 million of U.S. Export-Import Bank funds available for similar projects throughout Poland.« less

Results of irradiation of (U0.55Pu0.45)N and (U0.4Pu0.6)N fuels in BOR-60 up to ˜12 at.% burn-up

NASA Astrophysics Data System (ADS)

Rogozkin, B. D.; Stepennova, N. M.; Fedorov, Yu. Ye.; Shishkov, M. G.; Kryukov, F. N.; Kuzmin, S. V.; Nikitin, O. N.; Belyaeva, A. V.; Zabudko, L. M.

2013-09-01

In the article presented are the results of post-irradiation tests of helium bonded fuel pins with mixed mononitride fuel (U0.55Pu0.45)N and (U0.4Pu0.6)N having 85% density irradiated in BOR-60 reactor. Achieved maximum burn-up was, respectively, equal to 9.4 and 12.1 at.% with max linear heat rates 41.9 and 54.5 kW/m. Maximum irradiation dose was 43 dpa. No damage of claddings made of ChS-68 steel (20% cold worked) was observed, and ductility margin existed. Maximum depth of cladding corrosion was within 15 μm. Swelling rates of (U0.4Pu0.6)N and (U0.55Pu0.45)N were, respectively, ˜1.1% and ˜0.68% per 1 at.%. Gas release rate did not exceed 19.3% and 19%. Pattern of porosity distribution in the fuel influenced fuel swelling and gas release rates. Plutonium and uranium are uniformly distributed in the fuel, local minimum values of their content being caused by pores and cracks in the pellets. The observable peaks in content distribution are probably connected with the local formation of isolated phases (e.g. Mo, Pd) while the minimum values refer to fuel pores and cracks. Xenon and cesium tend to migrate from the hot sections of fuel, and therefore their min content is observed in the central section of the fuel pellets. Phase composition of the fuel was determined with X-ray diffractometer. The X-ray patterns of metallographic specimens were obtained by the scanning method (the step was 0.02°, the step exposition was equal to 2 s). From the X-ray diffraction analysis data, it follows that the nitrides of both fuel types have the single-phase structure with an FCC lattice (see Table 6).

Radiation exposure and performance of multiple burn LEO-GEO orbit transfer trajectories

NASA Technical Reports Server (NTRS)

Gorland, S. H.

1985-01-01

Many potential strategies exist for the transfer of spacecraft from low Earth orbit (LEO) to geosynchronous (GEO) orbit. One strategy has generally been utilized, that being a single impulsive burn at perigee and a GEO insertion burn at apogee. Multiple burn strategies were discussed for orbit transfer vehicles (OTVs) but the transfer times and radiation exposure, particularly for potentially manned missions, were used as arguments against those options. Quantitative results concerning the trip time and radiation encountered by multiple burn orbit transfer missions in order to establish the feasibility of manned missions, the vulnerability of electronics, and the shielding requirements are presented. The performance of these multiple burn missions is quantified in terms of the payload and propellant variances from the minimum energy mission transfer. The missions analyzed varied from one to eight perigee burns and ranged from a high thrust, 1 g acceleration, cryogenic hydrogen-oxygen chemical prpulsion system to a continuous burn, 0.001 g acceleration, hydrogen fueled resistojet propulsion system with a trip time of 60 days.

Comparison of three different dressings for partial thickness burns in children: study protocol for a randomised controlled trial

PubMed Central

2013-01-01

Background In the paediatric population, pain and distress associated with burn injuries during wound care procedures remain a constant challenge. Although silver dressings are the gold standard for burn care in Australasia, very few high-level trials have been conducted that compare silver dressings to determine which will provide the best level of care clinically. Therefore, for paediatric patients in particular, identifying silver dressings that are associated with lower levels of pain and rapid wound re-epithelialisation is imperative. This study will determine whether there is a difference in time to re-epithelialisation and pain and distress experienced during wound care procedures among Acticoat™, Acticoat™ combined with Mepitel™ and Mepilex Ag™ dressings for acute, paediatric partial thickness burns. Methods/Design Children aged 0 to 15 years with an acute partial thickness (superficial partial to deep partial thickness inclusive) burn injury and a burn total body surface area of ≤10% will be eligible for the trial. Patients will be randomised to one of the three dressing groups: (1) Acticoat™ or (2) Acticoat™ combined with Mepitel™ or (3) Mepilex Ag™. A minimum of 28 participants will be recruited for each treatment group. Primary measures of pain, distress and healing will be repeated at each dressing change until complete wound re-epithelialisation occurs or skin grafting is required. Additional data collected will include infection status at each dressing change, physical function, scar outcome and scar management requirements, cost effectiveness of each dressing and staff perspectives of the dressings. Discussion The results of this study will determine the effects of three commonly used silver and silicone burn dressing combinations on the rate of wound re-epithelialisation and pain experienced during dressing procedures in acute, paediatric partial thickness burn injuries. Trial registration Australian New Zealand Clinical Trials Registry ACTRN12613000105741 PMID:24274190

Effect of crib dimensions on burning rate

Treesearch

S. McAllister; M. Finney

2013-01-01

The burning rate of unconfined cribs has long been identified to occur in two regimes: the densely-packed regime where the burning rate is proportional to the crib porosity and the loosely-packed regime where the burning rate is independent of porosity. Though the cribs used to define these burning regimes were primarily cubic in dimension, there are seemingly endless...

Torrefaction of Durian peel and bagasse for bio-briquette as an alternative solid fuel

NASA Astrophysics Data System (ADS)

Haryati, S.; Rahmatullah; Putri, R. W.

2018-03-01

Biomass waste of durian (Durio zibethinus) peel and bagasse could be used as solid fuel by a toreffaction process. Durian peel and bagasse were washed and crushed into small sizes then dryed in order to remove water content. The treated biomass was burned at varied temperature of 200 – 350 °C and a residence time of 30 min prior to producing torrified charcoal as intermediate product. Torrified charcoal was ground into a powder blended with tapioca glue followed by casting into a cylinder to form a bio-briqquette. The bio-briquette was characterized by determining its calorific value via bomb carolimeter analysis. The key parameter of bio-briquette are calorific value and combustion rate. The result that as the burning temperature was increased the calorific value of bio-briquettes also increased. The maximum calorific value was achieved at 350°C whereas the maximum calorific value of durian (6,157 cal/gr) is higher than bagasse (6,109 cal/gr). The minimum combustion rate was attained in durian peel torrefaction at 350 °C with the rate 0.0398 g/s. The result showed that bio-briquette of durian peel and bagasse have calorific values equivalent to that of subbituminus coal in the range of 4,900 - 6,800 cal/gr.

Fire behavior simulation in Mediterranean forests using the minimum travel time algorithm

Treesearch

Kostas Kalabokidis; Palaiologos Palaiologou; Mark A. Finney

2014-01-01

Recent large wildfires in Greece exemplify the need for pre-fire burn probability assessment and possible landscape fire flow estimation to enhance fire planning and resource allocation. The Minimum Travel Time (MTT) algorithm, incorporated as FlamMap's version five module, provide valuable fire behavior functions, while enabling multi-core utilization for the...

Do burns increase the severity of terror injuries?

PubMed

Peleg, Kobi; Liran, Alon; Tessone, Ariel; Givon, Adi; Orenstein, Arie; Haik, Josef

2008-01-01

The use of explosives and suicide bombings has become more frequent since October 2000. This change in the nature of terror attacks has marked a new era in the Israeli-Palestinian conflict. We previously reported that the incidence of thermal injuries has since risen. However, the rise in the incidence of burns among victims of terror was proportionate to the rise in the incidence of burns among all trauma victims. This paper presents data from the Israeli National Trauma Registry during the years 1997--2003, to compare the severity of injuries and outcome (mortality rates) in terror victims with and without burn injuries. We also compare the severity of injuries and outcome (mortality rates) for patients with terror-attack related burns to non terror-attack related burns during the same period. Data was obtained from the Israeli National Trauma Registry for all patients admitted to 8 to 10 hospitals in Israel between 1997 and 2003. We analyzed and compared demographic and clinical characteristics of 219 terror-related burn patients (terror/burn), 2228 terror patients with no associated burns (Terror/no-burn) and 6546 non terror related burn patients (burn/no-terror). Severity of injuries was measured using the injury severity score, and burn severity by total body surface percentage indices. Admission rates to Intensive Care Units (ICU) and total length of hospitalization were also used to measure severity of injuries. In-hospital mortality rates were used to indicate outcome. Of burn/terror patients, 87.2% suffered other accompanying injuries, compared with 10.4% of burn/no-terror patients. Of burn/terror patients, 49.8% were admitted to ICU compared with only 11.9% of burn/no-terror patients and 23.8% of no-burn/terror patients. Mean length of hospital stay was 18.5 days for the terror/burn group compared with 11.1 days for the burn/no-terror group and 9.5 days for the terror/no-burn group. Burn/terror patients had a significantly higher injury severity score compared with the other groups. In-hospital mortality rate for the burn/no-terror group was 3.4%. The burn/terror group had a mortality rate of 6.4% which was similar to the no-burn/terror group (6.6%). Terror-attack injuries with accompanying burns have a more complex presentation, are of higher severity, and are associated with increased length of hospital stay and a higher ICU admissions rate, compared with terror-attack injuries without burns and non terror-attack related burns. However, mortality rates in terror-attack injuries are not affected by burns.

Effects of normal acceleration on transient burning rate augmentation of an aluminized solid propellant

NASA Technical Reports Server (NTRS)

Northam, G. B.

1972-01-01

Instantaneous burning rate data for a polybutadiene acrylic acid propellant, containing 16 weight percent aluminum, were calculated from the pressure histories of a test motor with 96.77 sq cm of burning area and a 5.08-cm-thick propellant web. Additional acceleration tests were conducted with reduced propellant web thicknesses of 3.81, 2.54, and 1.27 cm. The metallic residue collected from the various web thickness tests was characterized by weight and shape and correlated with the instantaneous burning rate measurements. Rapid depressurization extinction tests were conducted in order that surface pitting characteristics due to localized increased burning rate could be correlated with the residue analysis and the instantaneous burning rate data. The acceleration-induced burning rate augmentation was strongly dependent on propellant distance burned, or burning time, and thus was transient in nature. The results from the extinction tests and the residue analyses indicate that the transient rate augmentation was highly dependent on local enhancement of the combustion zone heat feedback to the surface by the growth of molten residue particles on or just above the burning surface. The size, shape, and number density of molten residue particles, rather than the total residue weight, determined the acceleration-induced burning rate augmentation.

Cement burns: retrospective study of 18 cases and review of the literature.

PubMed

Poupon, M; Caye, N; Duteille, F; Pannier, M

2005-11-01

Cement is increasingly used in the construction industry, but the occurrence of cement burns is rarely reported. This retrospective study concerns patients treated for cement burns in our unit between 1997 and 2002. Eighteen patients 18-64 years of age, treated previously in our unit for cement burns, were interviewed by telephone for evaluation. The mean time since treatment was 39 months. Burns were predominantly seen on the lower limbs, and a third occurred during an accident on the job. All deep burns were excised, and 16 patients received grafts. Mean hospital stay was 10 days, and mean sick leave 2 months. Our study indicated that all patients were poorly informed about cement-related risks. Surgical treatment of full-thickness cement burns at diagnosis enables rapid healing with a minimum of sequelae and reduces the high socioeconomic costs resulting from these lesions. This study indicates once again the need to improve preventive measures; which are very often inadequate because of lack of awareness of risks.

Accuracy of real time radiography burning rate measurement

NASA Astrophysics Data System (ADS)

Olaniyi, Bisola

The design of a solid propellant rocket motor requires the determination of a propellant's burning-rate and its dependency upon environmental parameters. The requirement that the burning-rate be physically measured, establishes the need for methods and equipment to obtain such data. A literature review reveals that no measurement has provided the desired burning rate accuracy. In the current study, flash x-ray modeling and digitized film-density data were employed to predict motor-port area to length ratio. The pre-fired port-areas and base burning rate were within 2.5% and 1.2% of their known values, respectively. To verify the accuracy of the method, a continuous x-ray and a solid propellant rocket motor model (Plexiglas cylinder) were used. The solid propellant motor model was translated laterally through a real-time radiography system at different speeds simulating different burning rates. X-ray images were captured and the burning-rate was then determined. The measured burning rate was within 1.65% of the known values.

Initial fuel temperature effects on burning rate of pool fire.

PubMed

Chen, Bing; Lu, Shou-Xiang; Li, Chang-Hai; Kang, Quan-Sheng; Lecoustre, Vivien

2011-04-15

The influence of the initial fuel temperature on the burning behavior of n-heptane pool fire was experimentally studied at the State Key Laboratory of Fire Science (SKLFS) large test hall. Circular pool fires with diameters of 100mm, 141 mm, and 200 mm were considered with initial fuel temperatures ranging from 290 K to 363 K. Burning rate and temperature distributions in fuel and vessel wall were recorded during the combustion. The burning rate exhibited five typical stages: initial development, steady burning, transition, bulk boiling burning, and decay. The burning rate during the steady burning stage was observed to be relatively independent of the initial fuel temperature. In contrast, the burning rate of the bulk boiling burning stage increases with increased initial fuel temperature. It was also observed that increased initial fuel temperature decreases the duration of steady burning stage. When the initial temperature approaches the boiling point, the steady burning stage nearly disappears and the burning rate moves directly from the initial development stage to the transition stage. The fuel surface temperature increases to its boiling point at the steady burning stage, shortly after ignition, and the bulk liquid reaches boiling temperature at the bulk boiling burning stage. No distinguished cold zone is formed in the fuel bed. However, boiling zone is observed and the thickness increases to its maximum value when the bulk boiling phenomena occurs. Copyright © 2011 Elsevier B.V. All rights reserved.

Detection of Trace Gases in Biomass Burning Plumes via Infrared Spectroscopy: Updates and Uses of the Northwest Infrared Database (NWIR)

NASA Astrophysics Data System (ADS)

Brauer, C. S.; Johnson, T. J.; Blake, T. A.; Sharpe, S. W.; Sams, R. L.; Tonkyn, R. G.

2014-12-01

The Northwest Infrared Database (NWIR) contains quantitative, gas-phase infrared spectra of nearly 500 pure chemical species, including over 60 molecules that are known or suspected biomass-burning effluents. The data, recorded at 0.1 cm-1 resolution, are pressure broadened to one atmosphere (N2) and each 25 oC spectrum is a composite composed of a minimum of ten individual measurements. Examples from this set of measurements will be presented and experimental details will be discussed in the context of the utility of NWIR for biomass-burning studies.

Use of multi-sensor active fire detections to map fires in the United States: the future of monitoring trends in burn severity

USGS Publications Warehouse

Picotte, Joshua J.; Coan, Michael; Howard, Stephen M.

2014-01-01

The effort to utilize satellite-based MODIS, AVHRR, and GOES fire detections from the Hazard Monitoring System (HMS) to identify undocumented fires in Florida and improve the Monitoring Trends in Burn Severity (MTBS) mapping process has yielded promising results. This method was augmented using regression tree models to identify burned/not-burned pixels (BnB) in every Landsat scene (1984–2012) in Worldwide Referencing System 2 Path/Rows 16/40, 17/39, and 1839. The burned area delineations were combined with the HMS detections to create burned area polygons attributed with their date of fire detection. Within our study area, we processed 88,000 HMS points (2003–2012) and 1,800 Landsat scenes to identify approximately 300,000 burned area polygons. Six percent of these burned area polygons were larger than the 500-acre MTBS minimum size threshold. From this study, we conclude that the process can significantly improve understanding of fire occurrence and improve the efficiency and timeliness of assessing its impacts upon the landscape.

77 FR 19687 - Notice of Inventory Completion: California Department of Parks and Recreation, Sacramento, CA

Federal Register 2010, 2011, 2012, 2013, 2014

2012-04-02

.... At an unknown date in the 1970s, a cremated human bone representing, at minimum, one individual was... 1970s, a cremated human bone representing, at minimum, one individual was removed from site CA-SDI- 1116... seed; 1 green fused shale biface tip; 1 burnt wonderstone flake; 2 burned worked faunal bone fragments...

High Pressure Burn Rate Measurements on an Ammonium Perchlorate Propellant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glascoe, E A; Tan, N

2010-04-21

High pressure deflagration rate measurements of a unique ammonium perchlorate (AP) based propellant are required to design the base burn motor for a Raytheon weapon system. The results of these deflagration rate measurements will be key in assessing safety and performance of the system. In particular, the system may experience transient pressures on the order of 100's of MPa (10's kPSI). Previous studies on similar AP based materials demonstrate that low pressure (e.g. P < 10 MPa or 1500 PSI) burn rates can be quite different than the elevated pressure deflagration rate measurements (see References and HPP results discussed herein),more » hence elevated pressure measurements are necessary in order understand the deflagration behavior under relevant conditions. Previous work on explosives have shown that at 100's of MPa some explosives will transition from a laminar burn mechanism to a convective burn mechanism in a process termed deconsolidative burning. The resulting burn rates that are orders-of-magnitude faster than the laminar burn rates. Materials that transition to the deconsolidative-convective burn mechanism at elevated pressures have been shown to be considerably more violent in confined heating experiments (i.e. cook-off scenarios). The mechanisms of propellant and explosive deflagration are extremely complex and include both chemical, and mechanical processes, hence predicting the behavior and rate of a novel material or formulation is difficult if not impossible. In this work, the AP/HTPB based material, TAL-1503 (B-2049), was burned in a constant volume apparatus in argon up to 300 MPa (ca. 44 kPSI). The burn rate and pressure were measured in-situ and used to calculate a pressure dependent burn rate. In general, the material appears to burn in a laminar fashion at these elevated pressures. The experiment was reproduced multiple times and the burn rate law using the best data is B = (0.6 {+-} 0.1) x P{sup (1.05{+-}0.02)} where B is the burn rate in mm/s and P is the pressure in units of MPa. Details of the experimental method, results and data analysis are discussed herein and briefly compared to other AP based materials that have been measured in this apparatus.« less

Measurement of Solid Rocket Propellant Burning Rate Using X-ray Imaging

NASA Astrophysics Data System (ADS)

Denny, Matthew D.

The burning rate of solid propellants can be difficult to measure for unusual burning surface geometries, but X-ray imaging can be used to measure burning rate. The objectives of this work were to measure the baseline burning rate of an electrically-controlled solid propellant (ESP) formulation with real-time X-ray radiography and to determine the uncertainty of the measurements. Two edge detection algorithms were written to track the burning surface in X-ray videos. The edge detection algorithms were informed by intensity profiles of simulated 2-D X-ray images. With a 95% confidence level, the burning rates measured by the Projected-Slope Intersection algorithm in the two combustion experiments conducted were 0.0839 in/s +/-2.86% at an average pressure of 407 psi +/-3.6% and 0.0882 in/s +/-3.04% at 410 psi +/-3.9%. The uncertainty percentages were based on the statistics of a Monte Carlo analysis on burning rate.

Acoustic emission strand burning technique for motor burning rate prediction

NASA Technical Reports Server (NTRS)

Christensen, W. N.

1978-01-01

An acoustic emission (AE) method is being used to measure the burning rate of solid propellant strands. This method has a precision of 0.5% and excellent burning rate correlation with both subscale and large rocket motors. The AE procedure burns the sample under water and measures the burning rate from the acoustic output. The acoustic signal provides a continuous readout during testing, which allows complete data analysis rather than the start-stop clockwires used by the conventional method. The AE method helps eliminate such problems as inhibiting the sample, pressure increase and temperature rise, during testing.

Fracture admissions after burns: A retrospective longitudinal study.

PubMed

Duke, Janine M; Randall, Sean M; Fear, Mark W; Boyd, James H; Wood, Fiona M

2017-09-01

Severe burn triggers systemic responses that result in reduced muscle mass and changes in bone formation, with recent evidence also suggesting systemic effects on bone after minor burns. The aim of this study was to assess if people hospitalised with a burn have increased admissions for fractures after discharge. A population-based longitudinal study using linked hospital morbidity and death data from Western Australia was undertaken of all persons hospitalised for a first burn (n=30,997) during the period 1980-2012. Australian population-based annual rates for fracture admissions for the period 1993-2012 were obtained from the Australian Institute of Health and Welfare. Rates of hospital admissions for fractures in the burn cohort and the Australian population were standardised, using the direct method, to the age and gender structure of the Western Australian population at the 2006. Annual standardised fracture admission rates for the period 1993-2012 were graphed with estimated 95% confidence intervals. Age and gender specific fracture rates were also examined. A total of 4004 members of the burn cohort had at least one fracture admission for a total of 6096. The median (IQR) time to the first fracture admission after burn was 6.9 years (2.8-13.6) and the median age (IQR) at first fracture admission was 31 years (20-49). The burn cohort experienced admissions for fractures at a rate approximately twice that of the Australian population. While rates were generally higher for males in the burn cohort when compared with males in the Australian population, female burn patients had significantly higher rates over the entire study period when compared with the female Australian population. Elevated rates were observed for those younger than 20 years at the time of the burn admission; however, rates were significantly and consistently elevated during the study period for those 20 years and older at the time of the burn. Burn patients experienced significantly higher age and gender standardised rates of admissions for fractures after discharge from hospital for their index burn. Further prospective research is indicated to clarify any underlyling pathogenic processes linked to the burn that may increase a patient's risk of having a fracture serious enough to undergo admission. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

Pyrolysis and combustion of tobacco in a cigarette smoking simulator under air and nitrogen atmosphere.

PubMed

Busch, Christian; Streibel, Thorsten; Liu, Chuan; McAdam, Kevin G; Zimmermann, Ralf

2012-04-01

A coupling between a cigarette smoking simulator and a time-of-flight mass spectrometer was constructed to allow investigation of tobacco smoke formation under simulated burning conditions. The cigarette smoking simulator is designed to burn a sample in close approximation to the conditions experienced by a lit cigarette. The apparatus also permits conditions outside those of normal cigarette burning to be investigated for mechanistic understanding purposes. It allows control of parameters such as smouldering and puff temperatures, as well as combustion rate and puffing volume. In this study, the system enabled examination of the effects of "smoking" a cigarette under a nitrogen atmosphere. Time-of-flight mass spectrometry combined with a soft ionisation technique is expedient to analyse complex mixtures such as tobacco smoke with a high time resolution. The objective of the study was to separate pyrolysis from combustion processes to reveal the formation mechanism of several selected toxicants. A purposely designed adapter, with no measurable dead volume or memory effects, enables the analysis of pyrolysis and combustion gases from tobacco and tobacco products (e.g. 3R4F reference cigarette) with minimum aging. The combined system demonstrates clear distinctions between smoke composition found under air and nitrogen smoking atmospheres based on the corresponding mass spectra and visualisations using principal component analysis.

[Characteristics of atmospheric CO2 concentration and variation of carbon source & sink at Lin'an regional background station].

PubMed

Pu, Jing-Jiao; Xu, Hong-Hui; Kang, Li-Li; Ma, Qian-Li

2011-08-01

Characteristics of Atmospheric CO2 concentration obtained by Flask measurements were analyzed at Lin'an regional background station from August 2006 to July 2009. According to the simulation results of carbon tracking model, the impact of carbon sources and sinks on CO2 concentration was evaluated in Yangtze River Delta. The results revealed that atmospheric CO2 concentrations at Lin'an regional background station were between 368.3 x 10(-6) and 414.8 x 10(-6). The CO2 concentration varied as seasons change, with maximum in winter and minimum in summer; the annual difference was about 20.5 x 10(-6). The long-term trend of CO2 concentration showed rapid growth year by year; the average growth rate was about 3.2 x 10(-6)/a. CO2 flux of Yangtze River Delta was mainly contributed by fossil fuel burning, terrestrial biosphere exchange and ocean exchange, while the contribution of fire emission was small. CO2 flux from fossil fuel burning played an important role in carbon source; terrestrial biosphere and ocean were important carbon sinks in this area. Seasonal variations of CO2 concentration at Lin'an regional background station were consistent with CO2 fluxes from fossil fuel burning and terrestrial biosphere exchange.

Results of Propellant Mixing Variable Study Using Precise Pressure-Based Burn Rate Calculations

NASA Technical Reports Server (NTRS)

Stefanski, Philip L.

2014-01-01

A designed experiment was conducted in which three mix processing variables (pre-curative addition mix temperature, pre-curative addition mixing time, and mixer speed) were varied to estimate their effects on within-mix propellant burn rate variability. The chosen discriminator for the experiment was the 2-inch diameter by 4-inch long (2x4) Center-Perforated (CP) ballistic evaluation motor. Motor nozzle throat diameters were sized to produce a common targeted chamber pressure. Initial data analysis did not show a statistically significant effect. Because propellant burn rate must be directly related to chamber pressure, a method was developed that showed statistically significant effects on chamber pressure (either maximum or average) by adjustments to the process settings. Burn rates were calculated from chamber pressures and these were then normalized to a common pressure for comparative purposes. The pressure-based method of burn rate determination showed significant reduction in error when compared to results obtained from the Brooks' modification of the propellant web-bisector burn rate determination method. Analysis of effects using burn rates calculated by the pressure-based method showed a significant correlation of within-mix burn rate dispersion to mixing duration and the quadratic of mixing duration. The findings were confirmed in a series of mixes that examined the effects of mixing time on burn rate variation, which yielded the same results.

Custom-fit polymeric membrane dressing masks in the treatment of second degree facial burns.

PubMed

Weissman, Oren; Hundeshagen, Gabriel; Harats, Moti; Farber, Nimrod; Millet, Eran; Winkler, Eyal; Zilinsky, Isaac; Haik, Josef

2013-09-01

Second degree facial burns usually impart high wound site pain levels and patient discomfort due to the abundance of facial sensory innervation, as well as the development of edema and inflammation that accompany wound healing. Frequent changing of adherent dressings causes additional procedural pain and may prolong healing due to recurring damage to the wound bed. We applied face masks, made on-site from a drug free polymeric membrane dressing, to 8 patients with superficial and deep 2nd degree facial burns. Time to full re-epithlialization was recorded during treatment. Pain, overall comfort, and result satisfaction were evaluated using a questionnaire (10-point Likert scales. From 1=minimum to 10=maximum) on follow-up (mean follow up 14.4 months, range 9-18). These results were compared to a historical cohort of patients with facial burns that were treated with an antibiotic ointment. Results showed mean re-epithelialization time of 6.5 days (as compared to 8.5 days in the cohort group), low pain ratings (mean: 2.6; range: 4.7 in the control group), mixed comfort levels (mean: 4.7/10; 4 in the control group) and high result satisfaction (mean: 7.8; 6.2 in the control group). Nursing staff described pain-free dressing changes and positively noted non-adherence and high absorbance capacity of the polymer, necessitating less dressing changes. Inflammation was contained to the actual site of injury. No complications in terms of infection or allergic reaction were observed. Overall, the polymeric membrane facial dressing seems to be a promising means of reducing pain and ensuring uninterrupted wound healing in 2nd degree facial burns. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Evaluation of Mannosidase and Trypsin Enzymes Effects on Biofilm Production of Pseudomonas aeruginosa Isolated from Burn Wound Infections.

PubMed

Banar, Maryam; Emaneini, Mohammad; Satarzadeh, Mhboubeh; Abdellahi, Nafiseh; Beigverdi, Reza; Leeuwen, Willem B van; Jabalameli, Fereshteh

2016-01-01

Biofilm is an important virulence factor in Pseudomonas aeruginosa and has a substantial role in antibiotic resistance and chronic burn wound infections. New therapeutic agents against P. aeruginosa, degrading biofilms in burn wounds and improving the efficacy of current antimicrobial agents, are required. In this study, the effects of α-mannosidase, β-mannosidase and trypsin enzymes on the degradation of P. aeruginosa biofilms and on the reduction of ceftazidime minimum biofilm eliminating concentrations (MBEC) were evaluated. All tested enzymes, destroyed the biofilms and reduced the ceftazidime MBECs. However, only trypsin had no cytotoxic effect on A-431 human epidermoid carcinoma cell lines. In conclusion, since trypsin had better features than mannosidase enzymes, it can be a promising agent in combatting P. aeruginosa burn wound infections.

The Combustion of HMX. [burning rate at high pressures

NASA Technical Reports Server (NTRS)

Boggs, T. L.; Price, C. F.; Atwood, A. I.; Zurn, D. E.; Eisel, J. L.

1980-01-01

The burn rate of HMX was measured at high pressures (p more than 1000 psi). The self deflagration rate of HMX was determined from 1 atmosphere to 50,000 psi. The burning rate shows no significant slope breaks.

Geographic distribution of burn in an Australian setting.

PubMed

Randall, Sean M; Wood, Fiona M; Boyd, James H; Duke, Janine M

2017-11-01

To investigate the geographic distribution and temporal trends of burn admissions in an Australian setting. Health administrative data of all persons hospitalised for a first burn in Western Australia for the period 2000-2012 were used. Crude and standardised incident rates were generated for each region. Maps of crude rates were generated for state regions and postcode-suburbs of Perth, the capital city. Standardised incidence rates were generated for Western Australia, total and regions, and for sub-cohorts defined by age (<20years; ≥20 years), TBSA burn severity and major causes of burns (fire, scalds and contact). Negative binomial regression was used to examine temporal changes and generate incidence rate ratios (IRR) with 95% confidence intervals (CI). Perth had the lowest burn admission rate per population; clusters of suburbs of lower social advantage and higher immigrant settlement were identified as being at high risk. While the highest observed admission rates were found in Kimberley and Goldfields (remote) regions, after adjustment for the regional demographic structures, the Wheatbelt and Mid-West (rural) regions were found to have the highest adjusted rates of burn admissions. Significant annual declines in admission rates were found for the Kimberley, Pilbara and Goldfields (remote regions); however, stable admission rates were identified for all other regions. The Mid-West and Wheatbelt rural regions were found to have the highest risk of burn admissions raising concerns about farming-related injury. Safety awareness and burn prevention strategies need to be continued, with specific attention to these high risk areas, to reduce burn admissions in Western Australia. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

40 CFR Table 1 to Subpart Ddddd of... - Emission Limits for New or Reconstructed Boilers and Process Heaters

Code of Federal Regulations, 2014 CFR

2014-07-01

... fossil fuel a. Filterable PM (or TSM) 1.1E-03 lb per MMBtu of heat input; or (2.3E-05 lb per MMBtu of... designed to burn coal/solid fossil fuel a. Carbon monoxide (CO) (or CEMS) 130 ppm by volume on a dry basis... minimum sampling time. 4. Stokers designed to burn coal/solid fossil fuel a. CO (or CEMS) 130 ppm by...

Development of strand burner for solid propellant burning rate studies

NASA Astrophysics Data System (ADS)

Aziz, A.; Mamat, R.; Ali, W. K. Wan

2013-12-01

It is well-known that a strand burner is an apparatus that provides burning rate measurements of a solid propellant at an elevated pressure in order to obtain the burning characteristics of a propellant. This paper describes the facilities developed by author that was used in his studies. The burning rate characteristics of solid propellant have be evaluated over five different chamber pressures ranging from 1 atm to 31 atm using a strand burner. The strand burner has a mounting stand that allows the propellant strand to be mounted vertically. The strand was ignited electrically using hot wire, and the burning time was recorded by electronic timer. Wire technique was used to measure the burning rate. Preliminary results from these techniques are presented. This study shows that the strand burner can be used on propellant strands to obtain accurate low pressure burning rate data.

Erosive burning research. [for solid-propellant rocket engines

NASA Technical Reports Server (NTRS)

Strand, L.; Yang, L. C.; Nguyen, M. H.; Cohen, N. S.

1986-01-01

A status report is given on the results for the completed tests in a series of motor firings being carried out to measure the effects of the parameters that are considered to most strongly influence the scaling to larger rocket motor sizes of the transition to/or threshold conditions for erosive burning rate augmentation. Propellant burning rates at locations along the axis of the test motors are measured with a newly developed plasma capacitance gauge technique. The measured results are compared with erosive-burning predictions from a supporting ballistics analysis. The completed motor firings have successfully demonstrated response to the designed test variables. The trends with varying propellant burning rate, chamber pressure, and mass flow rate are consistent with existing results, but no pronounced effect of surface roughness has been observed. Rather, the influence of propellant oxidizer particle size on erosive burning is through its effect on the base, no-corssflow burning rate.

77 FR 65678 - Combined Notice of Filings #1

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-30

... Power Act and Request for Waivers, Confidential Treatment, Shortened Comment Period and Expedited Action... Tariff Revisions re: Minimum Oil Burn Program to be effective 12/21/2012. Filed Date: 10/22/12. Accession...

A protocol for resuscitation of severe burn patients guided by transpulmonary thermodilution and lactate levels: a 3-year prospective cohort study.

PubMed

Sánchez, Manuel; García-de-Lorenzo, Abelardo; Herrero, Eva; Lopez, Teresa; Galvan, Beatriz; Asensio, María; Cachafeiro, Lucia; Casado, Cesar

2013-08-15

The use of urinary output and vital signs to guide initial burn resuscitation may lead to suboptimal resuscitation. Invasive hemodynamic monitoring may result in over-resuscitation. This study aimed to evaluate the results of a goal-directed burn resuscitation protocol that used standard measures of mean arterial pressure (MAP) and urine output, plus transpulmonary thermodilution (TPTD) and lactate levels to adjust fluid therapy to achieve a minimum level of preload to allow for sufficient vital organ perfusion. We conducted a three-year prospective cohort study of 132 consecutive critically burned patients. These patients underwent resuscitation guided by MAP (>65 mmHg), urinary output (0.5 to 1 ml/kg), TPTD and lactate levels. Fluid therapy was adjusted to achieve a cardiac index (CI) >2.5 L/minute/m² and an intrathoracic blood volume index (ITBVI) >600 ml/m2, and to optimize lactate levels. Statistical analysis was performed using mixed models. We also used Pearson or Spearman methods and the Mann-Whitney U-test. A total of 98 men and 34 women (mean age, 48 ± 18 years) was studied. The mean total body surface area (TBSA) burned was 35% ± 22%. During the early resuscitation phase, lactate levels were elevated (2.58 ± 2.05 mmol/L) and TPTD showed initial hypovolemia by the CI (2.68 ± 1.06 L/minute/m²) and the ITBVI (709 ± 254 mL/m²). At 24 to 32 hours, the CI and lactic levels were normalized, although the ITBVI remained below the normal range (744 ± 276 ml/m²). The mean fluid rate required to achieve protocol targets in the first 8 hours was 4.05 ml/kg/TBSA burned, which slightly increased in the next 16 hours. Patients with a urine output greater than or less than 0.5 ml/kg/hour did not show differences in heart rate, mean arterial pressure, CI, ITBVI or lactate levels. Initial hypovolemia may be detected by TPTD monitoring during the early resuscitation phase. This hypovolemia might not be reflected by blood pressure and hourly urine output. An adequate CI and tissue perfusion can be achieved with below-normal levels of preload. Early resuscitation guided by lactate levels and below-normal preload volume targets appears safe and avoids unnecessary fluid input.

Burns and Fire Safety

MedlinePlus

Number of Deaths Death Rate Burns and Fire Safety Fact Sheet (2015) Fatalities • 334 children ages 19 and under died from fires or burns ... burns were ages 4 and under. 1 The death rate for children this age (0.73 per 100, ...

An Experimental Examination of Combustion of Isolated Liquid Fuel Droplets with Polymeric and Nanoparticle Additives

NASA Astrophysics Data System (ADS)

Ghamari, Mohsen

In spite of recent attention to renewable sources of energy, liquid hydrocarbon fuels are still the main source of energy for industrial and transportation systems. Manufactures and consumers are consistently looking for ways to optimize the efficiency of fuel combustion in terms of cost, emissions and consumer safety. In this regard, increasing burning rate of liquid fuels has been of special interest in both industrial and transportation systems. Recent studies have shown that adding combustible nano-particles could have promising effects on improving combustion performance of liquid fuels. Combustible nano-particles could enhance radiative and conductive heat transfer and also mixing within the droplet. Polymeric additive have also shown promising effect on improving fire safety by suppressing spreading behavior and splatter formation in case of crash scenario. Polymers are also known to have higher burning rate than regular hydrocarbon fuels. Therefore adding polymeric additive could have the potential to increase the burning rate. In this work, combustion dynamics of liquid fuel droplets with both polymeric and nanoparticle additives is studied in normal gravity. High speed photography is employed and the effect of additive concentration on droplet burning rate, burning time, extinction and soot morphology is investigated. Polymer added fuel was found to have a volatility controlled combustion with four distinct regimes. The first three zones are associated with combustion of base fuel while the polymer burns last and after a heating zone because of its higher boiling point. Polymer addition reduces the burning rate of the base fuel in the first zone by means of increasing viscosity and results in nucleate boiling and increased burning rates in the second and third stages. Overall, polymer addition resulted in a higher burning rate and shorter burning time in most of the scenarios. Colloidal suspensions of carbon-based nanomaterials in liquid fuels were also tested at different particle loadings. It was found that dispersing nanoparticles results in higher burning rate by means of enhanced radiative heat absorption and thermal conductivity. An optimum particle loading was found for each particle type at which the maximum burning rate was achieved. It was observed that the burning rate again starts to reduce after this optimum point most likely due to the formation of large aggregates that reduce thermal conductivity and suppress the diffusion of species.

Henslow's sparrow winter-survival estimates and response to prescribed burning

USGS Publications Warehouse

Thatcher, B.S.; Krementz, D.G.; Woodrey, M.S.

2006-01-01

Wintering Henslow's sparrow (Ammodramus henslowii) populations rely on lands managed with prescribed burning, but the effects of various burn regimes on their overwinter survival are unknown. We studied wintering Henslow's sparrows in coastal pine savannas at the Mississippi Sandhill Crane National Wildlife Refuge, Jackson County, Mississippi, USA, during January and February 2001 and 2002. We used the known-fate modeling procedure in program MARK to evaluate the effects of burn age (1 or 2 growing seasons elapsed), burn season (growing, dormant), and calendar year on the survival rates of 83 radiomarked Henslow's sparrows. We found strong evidence that Henslow's sparrow survival rates differed by burn age (with higher survival in recently burned sites) and by year (with lower survival rates in 2001 likely because of drought conditions). We found some evidence that survival rates also differed by bum season (with higher survival in growing-season sites), although the effects of burn season were only apparent in recently burned sites. Avian predation was the suspected major cause of mortality (causing 6 of 14 deaths) with 1 confirmed loggerhead shrike (Lanius ludovicianus) depredation. Our results indicated that recently burned savannas provide high-quality wintering habitats and suggested that managers can improve conditions for wintering Henslow's sparrows by burning a large percentage of savannas each year.

Developing a burn injury severity score (BISS): adding age and total body surface area burned to the injury severity score (ISS) improves mortality concordance.

PubMed

Cassidy, J Tristan; Phillips, Michael; Fatovich, Daniel; Duke, Janine; Edgar, Dale; Wood, Fiona

2014-08-01

There is limited research validating the injury severity score (ISS) in burns. We examined the concordance of ISS with burn mortality. We hypothesized that combining age and total body surface area (TBSA) burned to the ISS gives a more accurate mortality risk estimate. Data from the Royal Perth Hospital Trauma Registry and the Royal Perth Hospital Burns Minimum Data Set were linked. Area under the receiver operating characteristic curve (AUC) measured concordance of ISS with mortality. Using logistic regression models with death as the dependent variable we developed a burn-specific injury severity score (BISS). There were 1344 burns with 24 (1.8%) deaths, median TBSA 5% (IQR 2-10), and median age 36 years (IQR 23-50). The results show ISS is a good predictor of death for burns when ISS≤15 (OR 1.29, p=0.02), but not for ISS>15 (ISS 16-24: OR 1.09, p=0.81; ISS 25-49: OR 0.81, p=0.19). Comparing the AUCs adjusted for age, gender and cause, ISS of 84% (95% CI 82-85%) and BISS of 95% (95% CI 92-98%), demonstrated superior performance of BISS as a mortality predictor for burns. ISS is a poor predictor of death in severe burns. The BISS combines ISS with age and TBSA and performs significantly better than the ISS. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Burning rate of solid wood measured in a heat release rate calorimeter

Treesearch

H. C. Tran; R. H. White

1992-01-01

Burning rate is a key factor in modeling fire growth and fire endurance of wood structures. This study investigated the burning rate of selected wood materials as determined by heat release, mass loss and charring rates. Thick samples of redwood, southern pine, red oak and basswood were tested in a heat release rate calorimeter. Results on ignitability and average beat...

Short-term responses of soil nitrogen mineralization, nitrification and denitrification to prescribed burning in a suburban forest ecosystem of subtropical Australia.

PubMed

Zhang, Manyun; Wang, Weijin; Wang, Dianjie; Heenan, Marijke; Xu, Zhihong

2018-06-17

As an anthropogenic disturbance, prescribed burning may alter the biogeochemistries of nutrients, including nitrogen (N) cycling, in forest ecosystems. This study aimed to examine the changes in N mineralization, nitrification and denitrification rates following prescribed burning in a suburban forest located in subtropical Australia and assess the interactive relationships among soil properties, functional gene abundances and N transformation rates. After a prescribed burning event, soil pH value increased, but soil labile carbon and mineral N contents decreased. Net N mineralization rates, potential nitrification rates and ammonium-oxidizing archaea and bacteria (AOA and AOB) amoA gene abundances in the soils all increased after 3 months of the prescribed burning. However, the abundances of different functional genes related to denitrification changed differently after the prescribed burning. The net N mineralization rates could be best described by soil abiotic properties, rather than functional gene abundances. In contrast, potential denitrification rates were positively related to soil nirK gene abundances. Potential nitrification rates could be influenced by both soil chemical and microbial properties. The results revealed that the prescribed burning might increase N mineralization and nitrification rates in the forest soil. Copyright © 2018 Elsevier B.V. All rights reserved.

Reacting Chemistry Based Burn Model for Explosive Hydrocodes

NASA Astrophysics Data System (ADS)

Schwaab, Matthew; Greendyke, Robert; Steward, Bryan

2017-06-01

Currently, in hydrocodes designed to simulate explosive material undergoing shock-induced ignition, the state of the art is to use one of numerous reaction burn rate models. These burn models are designed to estimate the bulk chemical reaction rate. Unfortunately, these models are largely based on empirical data and must be recalibrated for every new material being simulated. We propose that the use of an equilibrium Arrhenius rate reacting chemistry model in place of these empirically derived burn models will improve the accuracy for these computational codes. Such models have been successfully used in codes simulating the flow physics around hypersonic vehicles. A reacting chemistry model of this form was developed for the cyclic nitramine RDX by the Naval Research Laboratory (NRL). Initial implementation of this chemistry based burn model has been conducted on the Air Force Research Laboratory's MPEXS multi-phase continuum hydrocode. In its present form, the burn rate is based on the destruction rate of RDX from NRL's chemistry model. Early results using the chemistry based burn model show promise in capturing deflagration to detonation features more accurately in continuum hydrocodes than previously achieved using empirically derived burn models.

Burn Incidence and Treatment in the U.S.

MedlinePlus

... state health data systems, and the National Burn Repository (NBR) of the American Burn Association (ABA). ABA ... Burn Admissions to Burn Centers (ABA National Burn Repository 2015) Survival Rate: 96.8% Gender: 68% Male, ...

Burden of burns in Portugal, 2000-2013: A clinical and economic analysis of 26,447 hospitalisations.

PubMed

Santos, João V; Oliveira, Andreia; Costa-Pereira, Altamiro; Amarante, José; Freitas, Alberto

2016-06-01

There is a lack of recent and nation-wide epidemiological studies of burns in Europe, mainly in southern Europe. There are no recent studies describing the clinical and economic burden of burns in this European area. Hence, this research aimed to describe the clinical and economic burden of burn hospitalisations in Portugal. A retrospective observational study was performed and the Portuguese hospitalisation database of public hospitals was used; all inpatients, discharged between 2000 and 2013, with a main or secondary diagnosis of burns (ICD-9-CM: 940.xx-949.xx) were taken into account. Furthermore, admissions to hospitals with and without burn centres were compared. A total of 26,447 burn hospitalisations were registered (mean of 1889burn admissions/year). The total hospitalisation rate was of 18.9hospitalisations/100,000inhabitants/year, and there was a higher incidence of male patients. Burn hospitalisations and hospitalisation rates are significantly decreasing - mostly in 0-14-year-old patients - and children below the age of 5 years represented a fifth of all admissions. Besides the important morbidity, the in-hospital mortality rate was of 4.4%. With a total annual charge of almost 13million Euros, the average cost per burn admission is increasing, and reached 8032Euros in 2013. Additionally, more than half of the patients admitted to hospitals without burn centres were not transferred to hospitals with burn centres, not following the European Burns Association transferral criteria. As the largest southern European nation-wide epidemiological study of burn patients, this research highlights that burn admissions, as well as hospitalisation rates, are decreasing significantly. This was particularly obvious among the youngest patients despite the fact that the numbers still remain very high. Moreover, the in-hospital mortality rate is still excessively high and the burn transferral criteria are not being followed. Thus, it is important to improve preventive measures, reach out to and educate providers about the burn transferral criteria, and develop specific health care strategies for children with these injuries. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Selective NOx Recirculation for Stationary Lean-Burn Natural Gas Engines

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nigel N. Clark

Nitric oxide (NO) and nitrogen dioxide (NO2) generated by internal combustion (IC) engines are implicated in adverse environmental and health effects. Even though lean-burn natural gas engines have traditionally emitted lower oxides of nitrogen (NOx) emissions compared to their diesel counterparts, natural gas engines are being further challenged to reduce NOx emissions to 0.1 g/bhp-hr. The Selective NOx Recirculation (SNR) approach for NOx reduction involves cooling the engine exhaust gas and then adsorbing the NOx from the exhaust stream, followed by the periodic desorption of NOx. By sending the desorbed NOx back into the intake and through the engine, amore » percentage of the NOx can be decomposed during the combustion process. SNR technology has the support of the Department of Energy (DOE), under the Advanced Reciprocating Engine Systems (ARES) program to reduce NOx emissions to under 0.1 g/bhp-hr from stationary natural gas engines by 2010. The NO decomposition phenomenon was studied using two Cummins L10G natural gas fueled spark-ignited (SI) engines in three experimental campaigns. It was observed that the air/fuel ratio ({lambda}), injected NO quantity, added exhaust gas recirculation (EGR) percentage, and engine operating points affected NOx decomposition rates within the engine. Chemical kinetic model predictions using the software package CHEMKIN were performed to relate the experimental data with established rate and equilibrium models. The model was used to predict NO decomposition during lean-burn, stoichiometric burn, and slightly rich-burn cases with added EGR. NOx decomposition rates were estimated from the model to be from 35 to 42% for the lean-burn cases and from 50 to 70% for the rich-burn cases. The modeling results provided an insight as to how to maximize NOx decomposition rates for the experimental engine. Results from this experiment along with chemical kinetic modeling solutions prompted the investigation of rich-burn operating conditions, with added EGR to prevent preignition. It was observed that the relative air/fuel ratio, injected NO quantity, added EGR fraction, and engine operating points affected the NO decomposition rates. While operating under these modified conditions, the highest NO decomposition rate of 92% was observed. In-cylinder pressure data gathered during the experiments showed minimum deviation from peak pressure as a result of NO injections into the engine. A NOx adsorption system, from Sorbent Technologies, Inc., was integrated with the Cummins engine, comprised a NOx adsorbent chamber, heat exchanger, demister, and a hot air blower. Data were gathered to show the possibility of NOx adsorption from the engine exhaust, and desorption of NOx from the sorbent material. In order to quantify the NOx adsorption/desorption characteristics of the sorbent material, a benchtop adsorption system was constructed. The temperature of this apparatus was controlled while data were gathered on the characteristics of the sorbent material for development of a system model. A simplified linear driving force model was developed to predict NOx adsorption into the sorbent material as cooled exhaust passed over fresh sorbent material. A mass heat transfer analysis was conducted to analyze the possibility of using hot exhaust gas for the desorption process. It was found in the adsorption studies, and through literature review, that NO adsorption was poor when the carrier gas was nitrogen, but that NO in the presence of oxygen was adsorbed at levels exceeding 1% by mass of the sorbent. From the three experimental campaigns, chemical kinetic modeling analysis, and the scaled benchtop NOx adsorption system, an overall SNR system model was developed. An economic analysis was completed, and showed that the system was impractical in cost for small engines, but that economies of scale favored the technology.« less

Burning of CP Titanium (Grade 2) in Oxygen-Enriched Atmospheres

NASA Technical Reports Server (NTRS)

Stoltzfus, Joel M.; Jeffers, Nathan; Gallus, Timothy D.

2012-01-01

The flammability in oxygen-enriched atmospheres of commercially pure (CP) titanium rods as a function of diameter and test gas pressure was determined. Test samples of varying diameters were ignited at the bottom and burned upward in 70% O2/balance N2 and in 99.5+% O2 at various pressures. The burning rate of each ignited sample was determined by observing the apparent regression rate of the melting interface (RRMI) of the burning samples. The burning rate or RRMI increased with decreasing test sample diameter and with increasing test gas pressure and oxygen concentration

Mental health outcomes of burn: A longitudinal population-based study of adults hospitalized for burns.

PubMed

Logsetty, Sarvesh; Shamlou, Amir; Gawaziuk, Justin P; March, Justin; Doupe, Malcolm; Chateau, Dan; Hoppensack, Mike; Khan, Sazzadul; Medved, Maria; Leslie, William D; Enns, Murray W; Stein, Murray B; Asmundson, Gordon J G; Sareen, Jitender

2016-06-01

This study investigates the increased risk of mental health outcomes and health care utilization associated with burn with two year of follow-up using a longitudinal population-based matched cohort design. Adult burn survivors (n=157) were identified from a provincial burn registry and matched 1:5 with non-burn control subjects from the general population (matching variables age and gender). The prevalence of mental health outcomes and the rates of health care utilization between the groups were compared for the 2years pre and post index date using anonymously linked population-based administrative health care data. Rates were adjusted for age, gender and sociodemographic characteristics. While the burn cohort had an increased prevalence of mental health problems after burn compared to the control cohort, the burn group also had an increased prevalence of pre-burn depression (16.6% vs 7.8%; p=0.0005) and substance use disorders (8.9% vs 3.2%; p=0.001) when compared to controls. Once the pre-existing prevalence of mental illness was taken into account there was no significant change in the prevalence of mental health problems when comparing the burn group to controls over time. Although burns may not increase rates of mental health issues and health care utilization, burn survivors are a vulnerable group who already demonstrate increased rates of psychopathology and need for care. The present study highlights the importance of assessment and treatment of mental health outcomes in this population. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Does fire severity influence shrub resprouting after spring prescribed burning?

NASA Astrophysics Data System (ADS)

Fernández, Cristina; Vega, José A.; Fonturbel, Teresa

2013-04-01

Prescribed burning is commonly used to reduce the risk of severe wildfire. However, further information about the associated environmental effects is required to help forest managers select the most appropriate treatment. To address this question, we evaluated if fire severity during spring prescribed burning significantly affects the resprouting ability of two common shrub species in shrubland under a Mediterranean climate in NW Spain. Fire behaviour and temperatures were recorded in tagged individuals of Erica australis and Pterospartum tridentatum during prescribed burning. The number and length of resprouted shoots were measured three times (6, 12 and 18 months) after the prescribed burning. The influence of a series of fire severity indicators on some plant resprouting vigour parameters was tested by canonical correlation analysis. Six months and one year after prescribed burning, soil burn severity (measured by the absolute reduction in depth of the organic soil layer, maximum temperatures in the organic soil layer and the mineral soil surface during burning and the post-fire depth of the organic soil layer) reduced the resprouting vigour of E. australis and P. tridentatum. In contrast, direct measurements of fire effects on plants (minimum branch diameter, duration of temperatures above 300 °C in the shrub crown and fireline intensity) did not affect the post-fire plant vigour. Soil burn severity during spring prescribed burning significantly affected the short-term resprouting vigour in a mixed heathland in Galicia. The lack of effects eighteen months after prescribed burning indicates the high resilience of these species and illustrates the need to conciliate fire prevention and conservation goals.

Simplified configuration for the combustor of an oil burner using a low pressure, high flow air-atomizing nozzle

DOEpatents

Butcher, Thomas A.; Celebi, Yusuf; Fisher, Leonard

2000-09-15

The invention relates to clean burning of fuel oil with air. More specifically, to a fuel burning combustion head using a low-pressure, high air flow atomizing nozzle so that there will be a complete combustion of oil resulting in a minimum emission of pollutants. The improved fuel burner uses a low pressure air atomizing nozzle that does not result in the use of additional compressors or the introduction of pressurized gases downstream, nor does it require a complex design. Inventors:

[Effect of prescribed burning on grassland nitrogen gross mineralization and nitrification].

PubMed

Li, Yuzhong; Zhu, Tingcheng; Li, Jiandong; Zhou, Daowei

2003-02-01

The seasonal dynamics of nitrogen gross mineralization, nitrification, and mineral nitrogen consumption rates in burned and unburned Leymus chinensis grasslands were studied with 15N pool dilution technique. The results indicated that the gross mineralization and nitrification rates in burned area were higher than those in unburned area in April and May, and lower than those in unburned area in September. NH4(+)-N consumption rates were higher than unburned area in April and May, and lower in September. NO3(-)-N consumption rates were higher than control in April and May, and lower than control in July and September. The NH4(+)-N concentrations were higher in burned area in April, May and July, and no difference in September. NO3(-)-N concentrations were no difference between burned and unburned areas in April and May, and higher in burned areas in July and September.

Shortest recurrence periods of novae

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kato, Mariko; Saio, Hideyuki; Hachisu, Izumi

Stimulated by the recent discovery of the 1 yr recurrence period nova M31N 2008-12a, we examined the shortest recurrence periods of hydrogen shell flashes on mass-accreting white dwarfs (WDs). We discuss the mechanism that yields a finite minimum recurrence period for a given WD mass. Calculating the unstable flashes for various WD masses and mass accretion rates, we identified a shortest recurrence period of about two months for a non-rotating 1.38 M {sub ☉} WD with a mass accretion rate of 3.6 × 10{sup –7} M {sub ☉} yr{sup –1}. A 1 yr recurrence period is realized for very massivemore » (≳ 1.3 M {sub ☉}) WDs with very high accretion rates (≳ 1.5 × 10{sup –7} M {sub ☉} yr{sup –1}). We revised our stability limit of hydrogen shell burning, which will be useful for binary evolution calculations toward Type Ia supernovae.« less

Collagen-cellulose nanocrystal scaffolds containing curcumin-loaded microspheres on infected full-thickness burns repair.

PubMed

Guo, Rui; Lan, Yong; Xue, Wei; Cheng, Biao; Zhang, Yuanming; Wang, Changyong; Ramakrishna, Seeram

2017-12-01

Burn infection is a serious problem that delays wound healing and leads to death. Curcumin (Cur) has been shown to exhibit antioxidant, anti-inflammatory, antimicrobial and anticarcinogenic activity. However, its instability, extremely low aqueous solubility and bioavailability in physiological fluids may make it difficult to maintain local Cur concentrations above the minimum inhibitory concentration for burn infection treatment. The objective of this study was to construct complexes of Cur/gelatin microspheres (GMs) and porous collagen (Coll)-cellulose nanocrystals (CNCs) composite scaffolds for full-thickness burn infection treatment. The Cur/GMs/Coll-CNCs scaffolds had high porosity, available pore size, and a long and sustained Cur release profile. Furthermore, the composite scaffold exhibited remarkably strong antibacterial activity. Hence, we evaluated the wound-healing effects and antibacterial properties of Cur/GMs/Coll-CNCs scaffolds in a rat full-thickness burn infection model. The Cur/GMs/Coll-CNCs scaffold was able to prevent not only local inflammation but also accelerated dermis regeneration. Thus, we conclude that Cur/GMs/Coll-CNCs scaffolds can act as an effective dermal regeneration template for full-thickness burn wound infection healing in rats models. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

Adult survivors' lived experience of burns and post-burn health: A qualitative analysis.

PubMed

Abrams, Thereasa E; Ogletree, Roberta J; Ratnapradipa, Dhitinut; Neumeister, Michael W

2016-02-01

The individual implications of major burns are likely to affect the full spectrum of patients' physical, emotional, psychological, social, environmental, spiritual and vocational health. Yet, not all of the post-burn health implications are inevitably negative. Utilizing a qualitative approach, this heuristic phenomenological study explores the experiences and perceptions early (ages 18-35) and midlife (ages 36-64) adults providing insight for how participants perceived their burns in relationship to their post-burn health. Participants were interviewed using semi-structured interview questions framed around seven domains of health. Interview recordings were transcribed verbatim then coded line by line, identifying dominant categories related to health. Categories were analyzed identifying shared themes among the study sample. Participants were Caucasian, seven males and one female. Mean age at time of interviews was 54.38 and 42.38 at time of burns. Mean time since burns occurred was 9.38 years with a minimum of (20%) total body surface area (TBSA) burns. Qualitative content analysis rendered three emergent health-related categories and associated themes that represented shared meanings within the participant sample. The category of "Physical Health" reflected the theme physical limitations, pain and sensitivity to temperature. Within the category of "Intellectual Health" were themes of insight, goal setting and self-efficacy, optimism and humor and within "Emotional Health" were the themes empathy and gratitude. By exploring subjective experiences and perceptions of health shared through dialog with experienced burned persons, there are opportunities to develop a more complete picture of how holistic health may be affected by major burns that in turn could support future long-term rehabilitative trajectories of early and midlife adult burn patients. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Growth rate predicts mortality of Abies concolor in both burned and unburned stands

USGS Publications Warehouse

van Mantgem, Phillip J.; Stephenson, Nathan L.; Mutch, Linda S.; Johnson, Veronica G.; Esperanza, Annie M.; Parsons, David J.

2003-01-01

Tree mortality is often the result of both long-term and short-term stress. Growth rate, an indicator of long-term stress, is often used to estimate probability of death in unburned stands. In contrast, probability of death in burned stands is modeled as a function of short-term disturbance severity. We sought to narrow this conceptual gap by determining (i) whether growth rate, in addition to crown scorch, is a predictor of mortality in burned stands and (ii) whether a single, simple model could predict tree death in both burned and unburned stands. Observations of 2622 unburned and 688 burned Abies concolor (Gord. & Glend.) Lindl. (white fir) in the Sierra Nevada of California, U.S.A., indicated that growth rate was a significant predictor of mortality in the unburned stands, while both crown scorch and radial growth were significant predictors of mortality in the burned stands. Applying the burned stand model to unburned stands resulted in an overestimation of the unburned stand mortality rate. While failing to create a general model of tree death for A. concolor, our findings underscore the idea that similar processes may affect mortality in disturbed and undisturbed stands.

Block 2 SRM conceptual design studies. Volume 1, Book 1: Conceptual design package

NASA Technical Reports Server (NTRS)

Smith, Brad; Williams, Neal; Miller, John; Ralston, Joe; Richardson, Jennifer; Moore, Walt; Doll, Dan; Maughan, Jeff; Hayes, Fred

1986-01-01

The conceptual design studies of a Block 2 Solid Rocket Motor (SRM) require the elimination of asbestos-filled insulation and was open to alternate designs, such as case changes, different propellants, modified burn rate - to improve reliability and performance. Limitations were placed on SRM changes such that the outside geometry should not impact the physical interfaces with other Space Shuttle elements and should have minimum changes to the aerodynamic and dynamic characteristics of the Space Shuttle vehicle. Previous Space Shuttle SRM experience was assessed and new design concepts combined to define a valid approach to assured flight success and economic operation of the STS. Trade studies, preliminary designs, analyses, plans, and cost estimates are documented.

A Hydrodynamic Characteristic of a Dual Fluidized Bed Gasification

NASA Astrophysics Data System (ADS)

Sung, Yeon Kyung; Song, Jae Hun; Bang, Byung Ryeul; Yu, Tae U.; Lee, Uen Do

A cold model dual fluidized bed (DFB) reactor, consisting of two parallel interconnected bubbling and fast fluidized beds, was designed for developing an auto-thermal biomass gasifier. The combustor of this system burns the rest char of the gasification process and provides heat to the gasifier by circulating solids inventory. To find an optimal mixing and circulation of heavy solid inventory and light biomass and char materials, we investigate two types of DFB reactors which have different configuration of distributor and way-out location of the solid inventory and char materials in the gasifier. To determine appropriate operating conditions, we measured minimum fluidization velocity, solid circulation rate, axial solid holdup and gas bypassing between the lower loop seal and the gasifier.

Synergistic interactions between leaf beetle herbivory and fire enhance tamarisk (Tamarix spp.) mortality

USGS Publications Warehouse

Drus, Gail M.; Dudley, Tom L.; Antonio, Carla M.; Even, Thomas J.; Brooks, Matt L.; Matchett, J.R.

2014-01-01

The combined effects of herbivory and fire on plant mortality were investigated using prescribed burns of tamarisk (Tamarix ramosissima Lebed) exposed to herbivory by the saltcedar leaf beetle (Chrysomelidae: Diorhabda carinulata Desbrocher). Tamarix stands in the Humboldt Sink (NV, USA) were divided into three treatments: summer burn (August 2006), fall burn (October 2006) and control (unburned), and litter depth was manipulated to vary fire intensity within burn seasons. A gradient of existing herbivory impact was described with three plant condition metrics prior to fire: reduced proportions of green canopy, percent root crown starch sampled at the height of the growing season (August 2006), and percent root crown starch measured during dormancy (December 2006). August root crown starch concentration and proportion green canopy were strongly correlated, although the proportion green canopy predicted mortality better than August root crown starch. December root crown starch concentration was more depleted in unburned trees and in trees burned during the summer than in fall burn trees. Mortality in summer burned trees was higher than fall burned trees due to higher fire intensity, but December root crown starch available for resprouting in the spring was also lower in summer burned trees. The greatest mortality was observed in trees with the lowest December root crown starch concentration which were exposed to high fire intensity. Disproportionate changes in the slope and curvature of prediction traces as fire intensity and December starch reach reciprocal maximum and minimum levels indicate that beetle herbivory and fire intensity are synergistic.

The Development of the Wall Momentum Erosive Burning Scaling Law and Macro Scale Erosive Burning Model

DTIC Science & Technology

2010-05-01

burn rate in excess of 2 in/sec at 1000 psi, and Mach numbers that reach 1.0 at the aft end at ignition . Typically, motors with high burning rate...37 VI I. INTRODUCTION Interior ballistics of solid propellant rocket motors continues to be an engineering discipline that is...and one open source paper published between 2005 and 2009 [2, 3, 13]. II. BACKGROUND Erosive burning is a term used in the solid rocket motor

Analysis of the burns profile and the admission rate of severely burned adult patient to the National Burn Center of Chile after the 2010 earthquake.

PubMed

Albornoz, Claudia; Villegas, Jorge; Sylvester, Marilu; Peña, Veronica; Bravo, Iside

2011-06-01

Chile is located in the Ring of Fire, in South America. An earthquake 8.8° affected 80% of the population in February 27th, 2010. This study was conducted to assess any change in burns profile caused by the earthquake. This was an ecologic study. We compared the 4 months following the earthquake in 2009 and 2010. age, TBSA, deep TBSA, agent, specific mortality rate and rate of admissions to the National burn Center of Chile. Mann-Whitney test and a Poisson regression were performed. Age, agent, TBSA and deep TBSA percentages did not show any difference. Mortality rate was lower in 2010 (0.52 versus 1.22 per 1,000,000 habitants) but no meaningful difference was found (Poisson regression p = 0.06). Admission rate was lower in 2010, 4.6 versus 5.6 per 1,000,000 habitants, but no differences were found (p = 0.26). There was not any admissions directly related to the earthquake. As we do not have incidence registries in Chile, we propose to use the rate of admission to the National Burn Reference Center as an incidence estimator. There was not any significant difference in the burn profile, probably because of the time of the earthquake (3 am). We conclude the earthquake did not affect the way the Chilean people get burned. Copyright © 2011 Elsevier Ltd and ISBI. All rights reserved.

The effects of epidermal debridement of partial-thickness burns on infection and reepithelialization in swine.

PubMed

Singer, A J; Thode, H C; McClain, S A

2000-02-01

Early postburn debridement of burn blisters is controversial. This study was conducted to compare rates of infection and reepithelialization in debrided vs nondebrided second-degree burns in swine. This was a prospective, blinded, controlled, experimental trial using isoflurane-anesthetized swine. Standardized partial-thickness burns were inflicted by applying an aluminum bar preheated to 80 degrees C to the backs and flanks of two young pigs for 20 seconds. In half of the burns the necrotic epidermis was manually debrided. All burns were randomly treated with octylcyanoacrylate spray (OCA) or dry gauze (C). Full-thickness biopsies were taken at 7, 10, and 14 days for blinded histopathologic evaluation. The primary outcomes were the proportions of infected burns at days 7 and 10 and the proportion of completely reepithelialized burns at day 14. Burns were considered infected in the presence of intradermal neutrophils containing bacteria (intraobserver agreement, K = 1.00). A secondary outcome was the proportion of burns with the presence of scar tissue (abnormal collagen under polarized light; intraobserver correlation, K = 0.93). Chi-square tests were used for group comparisons. This study had 90% power to detect a 40-percentage-point difference in infection rates (alpha = 0.05). A total of 126 biopsies from 42 burns were available for review. Infection rates were higher in the debrided burns both at day 7 (55% vs 4.5%, p < 0.001) and at day 10 (65% vs 9%, p < 0.001) after injury. The proportion of nondebrided burns that were completely reepithelialized was higher at days 10 (68% vs 0%, p < 0.001) and 14 (100% vs 65%, p = 0.003). The presence of scar tissue was more common in debrided burns (75% vs 4.5%, p < 0.001). Burns treated with OCA had fewer infections than controls (4% vs 55%, p < 0.001). Fewer OCA-treated debrided burns were reepithelialized at 14 days than those that were not debrided (30% vs 100%, p = 0.001). Under the current study conditions, early postburn epidermal debridement of second-degree burns resulted in more infections and slower reepithelialization rates in swine. The effects of early postburn epidermal debridement in humans should be explored.

Burning rates of wood cribs with implications for wildland fires

Treesearch

Sara McAllister; Mark Finney

2016-01-01

Wood cribs are often used as ignition sources for room fire tests and the well characterized burning rates may also have applications to wildland fires. The burning rate of wildland fuel structures, whether the needle layer on the ground or trees and shrubs themselves, is not addressed in any operational fire model and no simple model exists. Several relations...

Addendum to High Pressure Burn Rate Measurements on an Ammonium Perchlorate Propellant

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glascoe, E A; Tan, N

2010-11-08

As part of a small follow-on study, the burn rate of the ammonium perchlorate (AP) based material TAL-1503 was studied at a relatively mild pressure. The goal of this final experiment was to burn TAL-1503 at the lowest pressures possible using the LLNL High Pressure Strand Burner (LLNL-HPSB). The following is a description of the experiment and the results with a brief discussion of data and a comparison to the higher pressure data. This is not meant to be a stand-alone report and readers should refer to the main report for experimental details and discussion. High pressure deflagration rate measurementsmore » of a unique AP/HTPB based material (TAL-1503) were performed using the LLNL high pressure strand burner apparatus. The material burns in a well behaved, laminar fashion between 20 and 300 MPa with a burn law of B = (0.6 {+-} 0.1) x P{sup (1.05{+-}0.02)} that was calculated based on the best data available from the experiments. In the pressure range of 2 and 10 MPa the material burned laminarly with a burn law of B = (2.0 {+-} 0.2) x P{sup (0.66{+-}0.05)}. In these results, B is the burn rate in mm/s and P is the pressure in units of MPa. Comparison of the TAL-1503 results with similar propellants that contain micrometer sized aluminum indicate that the burn rates are relatively unaffected by the aluminum. However, the pressure change is significantly larger when aluminum is present, most likely due to the high temperatures achieved from burning aluminum.« less

Evaluation of Additives to Reduce Solid Propellant Flammability in Ambient Air.

DTIC Science & Technology

1975-12-01

been applied successfully to reduce the flammability of plastics and polymers. From that experimental data base, the following have been shown to be...consumption rate of the cube) are reported since they are more repeatable than the linear burning rate data . B. Free Convection Effects Several series of...Steady State Burning Rate Measurements Obtaining steady state burning rate data in air requires a technique for holding the characteristic length

Efficacy of moist exposed burn ointment on burns.

PubMed

Zhang, Hong-Qi; Yip, Tsui-Pik; Hui, Irene; Lai, Vincy; Wong, Ann

2005-01-01

In this study, we sought to test the medical efficacy of a Chinese medical herb product, moist exposed burn ointment (MEBO), on wound healing rate and infection control in burn injury. Standardized deep burn wounds were created on the back skin of rats by applying a hot brass bar for 12 to 18 seconds. MEBO was applied four times per day and compared with petroleum jelly, silver sulfadiazine, and dry exposure therapy. Under such a controlled setting, although MEBO had a better wound healing rate than the dry exposure treatment, it did not show the medical advantage statistically, as has been claimed, over the other two treatments (P > .05), either in terms of wound healing rate or bacterial control. We conclude that the MEBO is not suitable for deep burn wound treatment, particularly when infection is a concern.

Burn-related factors affecting anxiety, depression and self-esteem in burn patients: an exploratory study.

PubMed

Jain, M; Khadilkar, N; De Sousa, A

2017-03-31

Burns are physically, psychologically and economically challenging injuries, and the factors leading to them are many and under-studied. The aim of the current study was to assess level of anxiety, depression and self-esteem in burn patients, and look at various burn-related variables that affect them. This cross-sectional study included 100 patients with burn injuries admitted to a tertiary care private hospital in an urban metropolis in India. The patients were assessed for anxiety, depression and self-esteem using the Hamilton anxiety rating scale, Hamilton depression rating scale and Rosenberg self-esteem scale respectively. Assessment was carried out within 2-8 weeks of injury following medical stabilization. The data was tabulated and statistically analyzed. The study sample was predominantly male (54%), married (69%), with a mean age of 34.1 ± 10.8 years. Accidental burns (94%) were the most common modality of injury. The majority (46%) suffered burns involving 20-59% total body surface area (TBSA), and facial burns were present (57%). No significant association was found between TBSA and anxiety, depression or self-esteem, and the same was true for facial burns. Deep burns, however, were significantly associated with anxiety (p=0.03) and depression (p=0.0002). High rates of anxiety and depression are associated with burn injuries and related to burn depth. Adjustment and recovery in these patients depends on various other factors like the patient's psychological status, nature/extent of the injury and ensuing medical care. Further research is warranted to reveal the magnitude and predictors of psychological problems in burn patients.

Impacts of wildfires on interannual trends in land surface phenology: an investigation of the Hayman Fire

NASA Astrophysics Data System (ADS)

Wang, Jianmin; Zhang, Xiaoyang

2017-05-01

Land surface phenology (LSP) derived from satellite data has been widely associated with recent global climate change. However, LSP is frequently influenced by land disturbances, which significantly limits our understanding of the phenological trends driven by climate change. Because wildfire is one of the most significant disturbance agents, we investigated the influences of wildfire on the start of growing season (SOS) and the interannual trends of SOS in the Hayman Fire area that occurred in 2002 in Colorado using time series of daily MODIS data (2001-2014). Results show that the Hayman Fire advanced the area-integrated SOS by 15.2 d and converted SOS from a delaying trend of 3.9 d/decade to an advancing trend of -1.9 d/decade during 2001-2014. The fire impacts on SOS increased from low burn severity to high burn severity. Moreover, the rate of increase of annual maximum and minimum EVI2 from 2003-2014 reflects that vegetation greenness could recover to pre-fire status in 2022 and 2053, respectively, which suggests that the fire impacts on the satellite-derived SOS variability and the interannual trends should continue in the next few decades.

The contribution of charcoal burning to the rise and decline of suicides in Hong Kong from 1997-2007.

PubMed

Law, C K; Yip, Paul S F; Caine, Eric D

2011-09-01

There has been scant research exploring the relationship between choice of method (means) of self-inflicted death, and broader social or contextual factors. The recent emergence and growth of suicide using carbon monoxide poisoning resulting from burning charcoal in an enclosed space (hereafter, "charcoal burning") was related to an increase in the overall suicide rate in Hong Kong. The growth of this method coincided with changing economic conditions. This paper expands upon previous work to explore possible relationships further. This study aims to discern the role of charcoal burning in overall suicide rate transition during times of both economic recession and expansion, as captured in the unemployment rate of Hong Kong, and to examine whether there was evidence of an effect from means-substitution. Age and gender specific suicide rates in Hong Kong by suicide methods from 1997 to 2007 were calculated. To model the transition of suicide rate by different methods, Poisson regression analyses were employed. Charcoal burning constituted 18.3% of all suicides, 88% of which involved individuals drawn from the middle years (25-59) of life. During both periods of rising and declining unemployment, charcoal burning played an important role in the changing suicide rates, and this effect was most prominent among for those in their middle years. Means-substitution was found among the married women during the period of rate advancement (1997-2003). Compared to others, working-age adults preferentially selected carbon monoxide poisoning from charcoal burning.

Experimental study on burning rates of square/rectangular gasoline and methanol pool fires under longitudinal air flow in a wind tunnel.

PubMed

Hu, L H; Liu, S; Peng, W; Huo, R

2009-09-30

Square pool fires with length of 5, 7.5, 10, 15, 20, 25 and 30 cm and rectangular pool fires with dimensions of 10 cm x 20 cm and 10 cm x 40 cm were burned in a wind tunnel, under a longitudinal air flow ranged from 0 to 3m/s with incremental change of about 0.5m/s. Methanol and gasoline were burned and compared, with results indicated that their burning rates showed different response to the longitudinal air flow. With the increase of the longitudinal air flow speed, the burning rates of methanol pool fires, except the 5 cm square one, first decreased and then increased, but those of the 5 cm methanol square one and the gasoline pool fires increased monotonously. The burning rate of smaller square pool fires increased more significantly than that of the larger ones, as well as the enlargement of their flame attachment length along the ground. The burning rate of a rectangular pool fire with longer rim parallel to the longitudinal flow increased faster, but the flame attachment length seemed to increase more gradually, with the increase of the longitudinal air flow speed than that perpendicular to.

Improved survival with an innovative approach to the treatment of severely burned patients: development of a burn treatment manual.

PubMed

Morisada, S; Nosaka, N; Tsukahara, K; Ugawa, T; Sato, K; Ujike, Y

2015-09-30

The management of severely burned patients remains a major issue worldwide as indicated by the high incidence of permanent debilitating complications and poor survival rates. In April 2012, the Advanced Emergency & Critical Care Medical Center of the Okayama University Hospital began implementing guidelines for severely burned patients, distributed as a standard burn treatment manual. The protocol, developed in-house, was validated by comparing the outcomes of patients with severe extensive burns (SEB) treated before and after implementation of these new guidelines at this institution. The patients included in this study had a burn index (BI) ≥30 or a prognostic burn index (PBI = BI + patient's age) ≥100. The survival rate of the patients with BI ≥30 was 65.2% with the traditional treatment and 100% with the new guidelines. Likewise, the survival rate of the patients with PBI ≥100 was 61.1% with the traditional treatment compared to 100% with the new guidelines. Together, these data demonstrate that the new treatment guidelines dramatically improved the treatment outcome and survival of SEB patients.

Penetrating Keratoplasty at a Tertiary Referral Center in Ethiopia: Indications and Outcomes.

PubMed

Ayalew, Menen; Tilahun, Yonas; Holsclaw, Doug; Indaram, Maanasa; Stoller, Nicole E; Keenan, Jeremy D; Rose-Nussbaumer, Jennifer

2017-06-01

To describe the indications, visual acuity outcomes, and graft survival after penetrating keratoplasty (PKP) in Addis Ababa, Ethiopia. The medical records of patients who underwent PKP at Menelik II Hospital between September 2000 and September 2013 were retrospectively reviewed. The prespecified outcomes were graft survival, visual acuity, and complication rates. A total of 321 patients underwent PKP during the study period and were included in the analysis. Indications for surgery were trachoma or leukoma in 141 (44%), keratoconus in 45 (14%), corneal dystrophy in 46 (14%), pseudophakic or aphakic bullous keratopathy in 28 (9%), trauma in 27 (8%), previous graft failure in 18 (6%), active ulcer, burn, or perforation in 9 (3%), and others in 7 (2%). The graft survival rate was 80% overall at 2 years but varied considerably depending on the indication for surgery. Uncorrected visual acuity improved from baseline mean logarithm of the minimum angle of resolution 2.09 (SD 0.67) to mean logarithm of the minimum angle of resolution of 1.53 (SD 1.03) at 2 years. A number of factors affected the visual acuity outcomes. Patients were not routinely refracted, and only 18% (N = 60) of patients had access to corrective spectacles or contact lenses postoperatively. Complication rates were high with infectious keratitis being the most common. PKP is becoming a viable treatment for corneal opacity in developing countries. However, the high burden of disease and lack of corrective lenses remain significant obstacles to overcome.

Antibacterial activity of some bryophytes used traditionally for the treatment of burn infections.

PubMed

Singh, Meenakshi; Singh, Shweta; Nath, Virendra; Sahu, Vinay; Rawat, Ajay Kumar Singh

2011-05-01

Plagiochasma appendiculatum L. & L. (Aytoniaceae), Conocephalum conicum (L.) Necker (Conocephalaceae), Bryum argenteum Hedw. (Bryaceae), and Mnium marginatum (With.) P. Beauv. (Mniaceae) are bryophytes (liverworts and mosses) used by traditional healers for the treatment of burn, cuts, wounds, and skin disorders. This study evaluated the antibacterial activity of four bryophytes against some common bacteria responsible for burn infections. Different fractions of bryophytes were screened using the disc diffusion (qualitative) and broth microdilution (quantitative) methods, according to the guidelines of the National Committee for Clinical and Laboratory Standards. Chloroform fractions of liverworts were more active against Gram negative strains while butanol fractions of mosses had significant activity against Gram positive bacteria. Staphylococcus aureus was the most sensitive strain of those tested with the butanol fraction of M. marginatum (moss), with the strongest inhibition zone of 102.92% and minimum inhibitory concentration of 30 μg mL(-1). Our findings support the use of the bryophytes in traditional medicine for burn infections because of their significant antibacterial activity.

A Burning Rate Emulator (BRE) for Study in Microgravity

NASA Technical Reports Server (NTRS)

Markan, A.; Sunderland, P. B.; Quintiere, J. G.; DeRis, J.; Stocker, D. P.

2015-01-01

A gas-fueled burner, the Burning Rate Emulator (BRE), is used to emulate condensed-phase fuel flames. The design has been validated to easily measure the burning behavior of condensed-phase fuels by igniting a controlled stream of gas fuel and diluent. Four properties, including the heat of combustion, the heat of gasification, the surface temperature, and the laminar smoke point, are assumed to be sufficient to define the steady burning rate of a condensed-phase fuel. The heat of gasification of the fuel is determined by measuring the heat flux and the fuel flow rate. Microgravity BRE tests in the NASA 5.2 s drop facility have examined the burning of pure methane and ethylene (pure and 50 in N2 balance). Fuel flow rates, chamber oxygen concentration and initial pressure have been varied. Two burner sizes, 25 and 50 mm respectively, are chosen to examine the nature of initial microgravity burning. The tests reveal bubble-like flames that increase within the 5.2s drop but the heat flux received from the flame appears to asymptotically approach steady state. Portions of the methane flames appear to locally detach and extinguish at center, while its shape remains fixed, but growing. The effective heat of gasification is computed from the final measured net heat flux and the fuel flow rate under the assumption of an achieved steady burning. Heat flux (or mass flux) and flame position are compared with stagnant layer burning theory. The analysis offers the prospect of more complete findings from future longer duration ISS experiments.

Constrained Burn Optimization for the International Space Station

NASA Technical Reports Server (NTRS)

Brown, Aaron J.; Jones, Brandon A.

2017-01-01

In long-term trajectory planning for the International Space Station (ISS), translational burns are currently targeted sequentially to meet the immediate trajectory constraints, rather than simultaneously to meet all constraints, do not employ gradient-based search techniques, and are not optimized for a minimum total deltav (v) solution. An analytic formulation of the constraint gradients is developed and used in an optimization solver to overcome these obstacles. Two trajectory examples are explored, highlighting the advantage of the proposed method over the current approach, as well as the potential v and propellant savings in the event of propellant shortages.

Improving burn care and preventing burns by establishing a burn database in Ukraine.

PubMed

Fuzaylov, Gennadiy; Murthy, Sushila; Dunaev, Alexander; Savchyn, Vasyl; Knittel, Justin; Zabolotina, Olga; Dylewski, Maggie L; Driscoll, Daniel N

2014-08-01

Burns are a challenge for trauma care and a contribution to the surgical burden. The former Soviet republic of Ukraine has a foundation for burn care; however data concerning burns in Ukraine has historically been scant. The objective of this paper was to compare a new burn database to identify problems and implement improvements in burn care and prevention in this country. Retrospective analyses of demographic and clinical data of burn patients including Tukey's post hoc test, analysis of variance, and chi square analyses, and Fisher's exact test were used. Data were compared to the American Burn Association (ABA) burn repository. This study included 1752 thermally injured patients treated in 20 hospitals including Specialized Burn Unit in Municipal Hospital #8 Lviv, Lviv province in Ukraine. Scald burns were the primary etiology of burns injuries (70%) and burns were more common among children less than five years of age (34%). Length of stay, mechanical ventilation use, infection rates, and morbidity increased with greater burn size. Mortality was significantly related to burn size, inhalation injury, age, and length of stay. Wound infections were associated with burn size and older age. Compared to ABA data, Ukrainian patients had double the length of stay and a higher rate of wound infections (16% vs. 2.4%). We created one of the first burn databases from a region of the former Soviet Union in an effort to bring attention to burn injury and improve burn care. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

A Burke-Schumann analysis of diffusion-flame structures supported by a burning droplet

NASA Astrophysics Data System (ADS)

Nayagam, Vedha; Dietrich, Daniel L.; Williams, Forman A.

2017-07-01

A Burke-Schumann description of three different regimes of combustion of a fuel droplet in an oxidising atmosphere, namely the premixed-flame regime, the partial-burning regime and the diffusion-flame regime, is presented by treating the fuel and oxygen leakage fractions through the flame as known parameters. The analysis shows that the burning-rate constant, the flame-standoff ratio, and the flame temperature in these regimes can be obtained from the classical droplet-burning results by suitable definitions of an effective ambient oxygen mass fraction and an effective fuel concentration in the droplet interior. The results show that increasing oxygen leakage alone through the flame lowers both the droplet burning rate and the flame temperature, whereas leakage of fuel alone leaves the burning rate unaffected while reducing the flame temperature and moving the flame closer to the droplet surface. Solutions for the partial-burning regime are shown to exist only for a limited range of fuel and oxygen leakage fractions.

Minimum Fuel Trajectory Design in Multiple Dynamical Environments Utilizing Direct Transcription Methods and Particle Swarm Optimization

DTIC Science & Technology

2016-03-01

89 3.1.3 NLP Improvement...3.2.1.2 NLP Improvement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98 3.2.2 Multiple-burn Planar LEO to GEO Transfer...101 3.2.2.1 PSO Initial Guess Generation . . . . . . . . . . . . . . . . . . . . . 101 3.2.2.2 NLP Improvement

Turbulent Burning Velocities of Two-Component Fuel Mixtures of Methane, Propane and Hydrogen

NASA Astrophysics Data System (ADS)

Kido, Hiroyuki; Nakahara, Masaya; Hashimoto, Jun; Barat, Dilmurat

In order to clarify the turbulent burning velocity of multi-component fuel mixtures, both lean and rich two-component fuel mixtures, in which methane, propane and hydrogen were used as fuels, were prepared while maintaining the laminar burning velocity approximately constant. A distinct difference in the measured turbulent burning velocity at the same turbulence intensity is observed for two-component fuel mixtures having different addition rates of fuel, even the laminar burning velocities are approximately the same. The burning velocities of lean mixtures change almost constantly as the rate of addition changes, whereas the burning velocities of the rich mixtures show no such tendency. This trend can be explained qualitatively based on the mean local burning velocity, which is estimated by taking into account the preferential diffusion effect for each fuel component. In addition, a model of turbulent burning velocity proposed for single-component fuel mixtures may be applied to two-component fuel mixtures by considering the estimated mean local burning velocity of each fuel.

The development of an erosive burning model for solid rocket motors using direct numerical simulation

NASA Astrophysics Data System (ADS)

McDonald, Brian A.

A method for developing an erosive burning model for use in solid propellant design-and-analysis interior ballistics codes is described and evaluated. Using Direct Numerical Simulation, the primary mechanisms controlling erosive burning (turbulent heat transfer, and finite rate reactions) have been studied independently through the development of models using finite rate chemistry, and infinite rate chemistry. Both approaches are calibrated to strand burn rate data by modeling the propellant burning in an environment with no cross-flow, and adjusting thermophysical properties until the predicted regression rate matches test data. Subsequent runs are conducted where the cross-flow is increased from M = 0.0 up to M = 0.8. The resulting relationship of burn rate increase versus Mach Number is used in an interior ballistics analysis to compute the chamber pressure of an existing solid rocket motor. The resulting predictions are compared to static test data. Both the infinite rate model and the finite rate model show good agreement when compared to test data. The propellant considered is an AP/HTPB with an average AP particle size of 37 microns. The finite rate model shows that as the cross-flow increases, near wall vorticity increases due to the lifting of the boundary caused by the side injection of gases from the burning propellant surface. The point of maximum vorticity corresponds to the outer edge of the APd-binder flame. As the cross-flow increases, the APd-binder flame thickness becomes thinner; however, the point of highest reaction rate moves only slightly closer to the propellant surface. As such, the net increase of heat transfer to the propellant surface due to finite rate chemistry affects is small. This leads to the conclusion that augmentation of thermal transport properties and the resulting heat transfer increase due to turbulence dominates over combustion chemistry in the erosive burning problem. This conclusion is advantageous in the development of future models that can be calibrated to heat transfer conditions without the necessity for finite rate chemistry. These results are considered applicable for propellants with small, evenly distributed AP particles where the assumption of premixed APd-binder gases is reasonable.

Aspects of Cool-Flame Supported Droplet Combustion in Microgravity

NASA Technical Reports Server (NTRS)

Nayagam, Vedha; Dietrich, Daniel L.; Williams, Forman A.

2015-01-01

Droplet combustion experiments performed on board the International Space Station have shown that normal-alkane fuels with negative temperature coefficient (NTC) chemistry can support quasi-steady, low-temperature combustion without any visible flame. Here we review the results for n-decane, n-heptane, and n-octane droplets burning in carbon dioxidehelium diluted environments at different pressures and initial droplet sizes. Experimental results for cool-flame burning rates, flame standoff ratios, and extinction diameters are compared against simplified theoretical models of the phenomenon. A simplified quasi-steady model based on the partial-burning regime of Lin predicts the burning rate, and flame standoff ratio reasonably well for all three normal alkanes. The second-stage cool-flame burning and extinction following the first-stage hot-flame combustion, however, shows a small dependence on the initial droplet size, thus deviating from the quasi-steady results. An asymptotic model that estimates the oxygen depletion by the hot flame and its influence on cool-flame burning rates is shown to correct the quasi-steady results and provide a better comparison with the measured burning-rate results.This work was supported by the NASA Space Life and Physical Sciences Research and Applications Program and the International Space Station Program.

The impact of patient demographics and comorbidities upon burns admitted to Tygerberg Hospital Burns Unit, Western Cape, South Africa.

PubMed

Cloake, T; Haigh, T; Cheshire, J; Walker, D

2017-03-01

In South Africa, burns are a major public health problem responsible for significant morbidity and long-term physical disability. This is, in part, due to a significant proportion of the urban population living in poorly constructed, combustible accommodation. The presence of co-morbid diseases such as diabetes and malignancy in patients with burns has been associated with a poorer outcome. The impact of other diseases such as HIV has yet to be defined. A retrospective data collection study analysed the 221 patients admitted to Tygerberg Hospital Burns Unit in 2011 and the first six months of 2013. Using hospital records, patient demographic data was collected alongside burn agent, ICU admission, complications, and patient outcome in terms of length of stay and mortality. The most common burn agent was hot liquid (45.7%). A significant proportion of patients were subject to intentional attacks (34.3%). Shack fires and flame accounted cumulatively for 85% of total inhalational burns, the highest rates of admission to ICU (85.5%), the highest rate of complications, as well as 92.3% of all total fatalities. HIV+ patients had a higher mortality (13.3% vs 5%, p=0.22) and a higher complication rate (46.7% vs 30%, p=0.21). There was no difference in length of stay between the HIV+ and HIV- cohort (12days vs. 15.5 days, p=0.916). Burns are a significant yet preventable cause of mortality and morbidity. The rising number of shack fires, responsible for extensive burns and resultant mortality is concerning and indicates urgent attention and action. HIV complicates the recovery from burn and is responsible for an increased rate of in hospital mortality. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Increased admissions for diabetes mellitus after burn.

PubMed

Duke, Janine M; Randall, Sean M; Fear, Mark W; Boyd, James H; O'Halloran, Emily; Rea, Suzanne; Wood, Fiona M

2016-12-01

Currently, limited long-term data on hyperglycaemia and insulin sensitivity in burn patients are available and the data that do exist are primarily related to paediatric severe burns. The aim of this study was to assess if burn is associated with increased post-burn admissions for diabetes mellitus. A population-based longitudinal study using linked hospital morbidity and death data from Western Australia was undertaken of all persons hospitalized for a first burn (n=30,997) in 1980-2012 and a frequency matched non-injury comparison cohort, randomly selected from Western Australia's birth registrations and electoral roll (n=123,399). Crude admission rates and summed length of stay for diabetes mellitus were calculated. Negative binomial and Cox proportional hazards regression modelling were used to generate incidence rate ratios (IRR) and hazard ratios (HR), respectively. After adjustment for socio-demographic factors and pre-existing health status, the burn cohort had 2.21 times (95% Confidence Interval (CI): 1.36-1.56) as many admissions and almost three times the number of days in hospital with a diabetes mellitus diagnosis (IRR, 95% CI: 2.94, 2.12-4.09) than the uninjured cohort. Admission rates were significantly elevated for those burned during childhood (<18 years, IRR, 95% CI: 2.65, 1.41-4.97) and adulthood (≥18 years, IRR, 95% CI: 2.12, 1.76-2.55). Incident admissions were significantly elevated in the burn cohort during the first 5 years post-burn when compared with the uninjured (HR, 95% CI: 1.96, 1.46-2.64); no significant difference was found beyond 5 years post-burn (HR, 95% CI: 1.08, 0.82-1.41). Findings of increased hospital admission rates and prolonged length of hospital stay for diabetes mellitus in the burn cohort provide evidence that burns have longer term effects on blood glucose and insulin regulation after wound healing. The first five years after burn discharge appears to be a critical period with significantly elevated incident admissions for diabetes mellitus during this time. Results would suggest prolonged clinical management after discharge and or wound healing to minimise post-burn admissions for diabetes mellitus is required. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Emulation of Condensed Fuel Flames Using a Burning Rate Emulator (BRE) in Microgravity

NASA Technical Reports Server (NTRS)

Markan, A.; Quintiere, J. G.; Sunderland, P. B.; De Ris, J. L.; Stocker, D. P.

2017-01-01

The Burning Rate Emulator (BRE) is a gaseous fuel burner developed to emulate the burning of condensed phase fuels. The current study details several tests at the NASA Glenn 5-s drop facility to test the BRE technique in microgravity conditions. The tests are conducted for two burner diameters, 25 mm and 50 mm respectively, with methane and ethylene as the fuels. The ambient pressure, oxygen content and fuel flow rate are additional parameters. The microgravity results exhibit a nominally hemispherical flame with decelerating growth and quasi-steady heat flux after about 5 seconds. The BRE burner was evaluated with a transient analysis to assess the extent of steady-state achieved. The burning rate and flame height recorded at the end of the drop are correlated using two steady-state purely diffusive models. A higher burning rate for the bigger burner as compared to theory indicates the significance of gas radiation. The effect of the ambient pressure and oxygen concentration on the heat of gasification are also examined.

Epidemiology of burns undergoing hospitalization to the National Burns Unit in the Sultanate of Oman: a 25-year review.

PubMed

Al-Shaqsi, Sultan; Al-Kashmiri, Ammar; Al-Bulushi, Taimoor

2013-12-01

The aim of this study was to describe the epidemiology of burns admitted to the National Burns Unit (NBU) in the Sultanate of Oman between 1987 and 2011. This is a retrospective review of burn patients admitted to Oman's National Burns Unit (NBU) between 1987 and 2011. The data extracted from the national burn registry. The study describes the admission rate by gender and age groups, occupation, causes of burns, time-to-admission, length of stay and in-hospital mortality of burns between 1987 and 2011. During a 25-year from 1987 to 2011, there were 3531 burn patients admitted to the National Burns Unit in Oman. The average admission rate to NBU is 7.02 per 100,000 persons per year. On average, males were more likely to be admitted to the NBU than females during the study period (P value < 0.04). Patients aged 1-10 years old constituted 46.6% of caseload during the study period. Flames and scalds caused 88.4% of burns. About half of all patients admitted to the NBU have burns to more than 11% of total body surface area (TBSA). The average stay in hospital was estimated to be 15.3 days per patient. The average in-hospital mortality rate was estimated to be 8.2% per year (range 1.9-22%). Burns are significant public health issue in the Sultanate of Oman. Children are disproportionately over-represented in this study. Prevention programmes are urgently needed to address this "silent and costly epidemic." Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Prognostic factors in electrical burns: a review of 101 patients.

PubMed

Saracoglu, Ayten; Kuzucuoglu, Tamer; Yakupoglu, Sezer; Kilavuz, Oguzhan; Tuncay, Erhan; Ersoy, Burak; Demirhan, Recep

2014-06-01

Electrical burn wounds are among the most devastating of burns, with wide-ranging injuries. We aimed to document the factors affecting the mortality rate of patients presenting with electrical burn wounds to our regional burn centre. This retrospective study was conducted on 101 patients from January 2009 to June 2012. Factors were classified under 11 topics and evaluated according to their relationship with the mortality rate. The major causes of death in burn victims were multiple organ failure and infection. Twenty-six percent of the 101 patients died, all of whom were male. One (1.4%) of the patients who survived was female; 73 (98.6%) survivors were male. The mean age in the deceased group was statistically higher than that of the other patients (32.7 vs. 35.6 years; P < 0.05). All-cause mortality was 2.79 times higher for larger burns (> 25% total body surface area). The values for creatine kinase, creatine kinase-MB, total body surface area of burn, hospitalised period in the intensive care unit and intubation rate were significantly higher in the exitus group. Renal injury requiring haemofiltration was associated with an almost 12-fold increased risk for mortality. There was no statistically significant difference between patients regarding surgical interventions. Electrical injury remains a major cause of mortality and long-term disability among young people. Our data demonstrated several risk factors associated with increased mortality rate in patients with electrical burn wounds. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

The impact of antibiotic impregnated PICC lines on the incidence of bacteremia in a regional burn center.

PubMed

Armstrong, Shannon D; Thomas, Wendy; Neaman, Keith C; Ford, Ronald D; Paulson, Jayne

2013-06-01

Peripherally inserted central catheters (PICCs) have been used increasingly in burn patients who often have decreased intravascular volumes and obtaining intravascular access for resuscitative efforts can be difficult. A potentially serious complication is bloodstream infection. The purpose of our study is to examine the impact of antibiotic impregnated PICC lines on the bacteremia rate in a regional burn center. Consecutive patients admitted to the burn unit and receiving an antibiotic impregnated PICC line were included in the study. Baseline demographics and bacteremia rate was recorded. A retrospective chart review was then undertaken of the 30 consecutive patients admitted to the burn unit and receiving a PICC line prior to the study period. Nineteen patients were enrolled over the two-year period. The bacteremia rate for the study group was 0% compared to the 50% bacteremia rate of the retrospective control group (p=<0.001). Antibiotic impregnated PICC lines decrease the bacteremia rate in our burn population. This has potential benefits for both patient morbidity and mortality as well as potential cost savings for the healthcare system. Copyright © 2012 Elsevier Ltd and ISBI. All rights reserved.

Pellet fuelling requirements to allow self-burning on a helical-type fusion reactor

NASA Astrophysics Data System (ADS)

Sakamoto, R.; Miyazawa, J.; Yamada, H.; Masuzaki, S.; Sagara, A.; the FFHR Design Group

2012-08-01

Pellet refuelling conditions to sustain a self-burning plasma have been investigated by extrapolating the confinement property of the LHD plasma, which appears to be governed by a gyro-Bohm-type confinement property. The power balance of the burning plasma is calculated taking into account the profile change with pellet deposition and subsequent density relaxation. A self-burning plasma is achieved within the scope of conventional pellet injection technology. However, a very small burn-up rate of 0.18% is predicted. Higher velocity pellet injection is effective in improving the burn-up rate by deepening particle deposition, whereas deep fuelling leads to undesirable fluctuation of the fusion output.

Combustion characteristics of nanoaluminum, liquid water, and hydrogen peroxide mixtures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sabourin, J.L.; Yetter, R.A.; Risha, G.A.

2008-08-15

An experimental investigation of the combustion characteristics of nanoaluminum (nAl), liquid water (H{sub 2}O{sub (l)}), and hydrogen peroxide (H{sub 2}O{sub 2}) mixtures has been conducted. Linear and mass-burning rates as functions of pressure, equivalence ratio ({phi}), and concentration of H{sub 2}O{sub 2} in H{sub 2}O{sub (l)} oxidizing solution are reported. Steady-state burning rates were obtained at room temperature using a windowed pressure vessel over an initial pressure range of 0.24 to 12.4 MPa in argon, using average nAl particle diameters of 38 nm, {phi} from 0.5 to 1.3, and H{sub 2}O{sub 2} concentrations between 0 and 32% by mass. Atmore » a nominal pressure of 3.65 MPa, under stoichiometric conditions, mass-burning rates per unit area ranged between 6.93 g/cm{sup 2} s (0% H{sub 2}O{sub 2}) and 37.04 g/cm{sup 2} s (32% H{sub 2}O{sub 2}), which corresponded to linear burning rates of 9.58 and 58.2 cm/s, respectively. Burning rate pressure exponents of 0.44 and 0.38 were found for stoichiometric mixtures at room temperature containing 10 and 25% H{sub 2}O{sub 2}, respectively, up to 5 MPa. Burning rates are reduced above {proportional_to}5 MPa due to the pressurization of interstitial spaces of the packed reactant mixture with argon gas, diluting the fuel and oxidizer mixture. Mass burning rates were not measured above {proportional_to}32% H{sub 2}O{sub 2} due to an anomalous burning phenomena, which caused overpressurization within the quartz sample holder, leading to tube rupture. High-speed imaging displayed fingering or jetting ahead of the normal flame front. Localized pressure measurements were taken along the sample length, determining that the combustion process proceeded as a normal deflagration prior to tube rupture, without significant pressure buildup within the tube. In addition to burning rates, chemical efficiencies of the combustion reaction were determined to be within approximately 10% of the theoretical maximum under all conditions studied. (author)« less

7 CFR 993.97 - Exhibit A; minimum standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... condition; (3) end cracks; (4) fermentation; (5) skin or flesh damage; (6) scab; (7) burned; (8) mold; (9... substantially affected. (3) End cracks means callous growth cracks, at the blossom end of prunes, aggregating... flavor is substantially affected. (5) Skin or flesh damage means growth cracks, splits, breaks in skin or...

30 CFR 77.1707 - First aid equipment; location; minimum requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... this paragraph (b) (2)); (3) Twenty-four triangular bandages (15 if a splint-stretcher combination is used); (4) Eight 4-inch bandage compresses; (5) Eight 2-inch bandage compresses; (6) Twelve 1-inch adhesive compresses; (7) An approved burn remedy; (8) Two cloth blankets; (9) One rubber blanket or...

30 CFR 77.1707 - First aid equipment; location; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... this paragraph (b) (2)); (3) Twenty-four triangular bandages (15 if a splint-stretcher combination is used); (4) Eight 4-inch bandage compresses; (5) Eight 2-inch bandage compresses; (6) Twelve 1-inch adhesive compresses; (7) An approved burn remedy; (8) Two cloth blankets; (9) One rubber blanket or...

30 CFR 77.1707 - First aid equipment; location; minimum requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... this paragraph (b) (2)); (3) Twenty-four triangular bandages (15 if a splint-stretcher combination is used); (4) Eight 4-inch bandage compresses; (5) Eight 2-inch bandage compresses; (6) Twelve 1-inch adhesive compresses; (7) An approved burn remedy; (8) Two cloth blankets; (9) One rubber blanket or...

30 CFR 77.1707 - First aid equipment; location; minimum requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... this paragraph (b) (2)); (3) Twenty-four triangular bandages (15 if a splint-stretcher combination is used); (4) Eight 4-inch bandage compresses; (5) Eight 2-inch bandage compresses; (6) Twelve 1-inch adhesive compresses; (7) An approved burn remedy; (8) Two cloth blankets; (9) One rubber blanket or...

30 CFR 57.6502 - Safety fuse.

Code of Federal Regulations, 2011 CFR

2011-07-01

... least the minimum burning time for a particular size round, as specified in the following table: Table E... blasthole detonates. (d) Fuse shall be cut and capped in dry locations. (e) Blasting caps shall be crimped... with devices designed for that purpose. Carbide lights, liquefied petroleum gas torches, and cigarette...

30 CFR 56.6502 - Safety fuse.

Code of Federal Regulations, 2014 CFR

2014-07-01

... a particular size round, as specified in the following table: Table E-1—Safety Fuse—Minimum Burning... be cut and capped in dry locations. (e) Blasting caps shall be crimped to fuse only with implements... purpose. Carbide lights, liquefied petroleum gas torches, and cigarette lighters shall not be used to...

30 CFR 57.6502 - Safety fuse.

Code of Federal Regulations, 2014 CFR

2014-07-01

... least the minimum burning time for a particular size round, as specified in the following table: Table E... blasthole detonates. (d) Fuse shall be cut and capped in dry locations. (e) Blasting caps shall be crimped... with devices designed for that purpose. Carbide lights, liquefied petroleum gas torches, and cigarette...

30 CFR 56.6502 - Safety fuse.

Code of Federal Regulations, 2013 CFR

2013-07-01

... a particular size round, as specified in the following table: Table E-1—Safety Fuse—Minimum Burning... be cut and capped in dry locations. (e) Blasting caps shall be crimped to fuse only with implements... purpose. Carbide lights, liquefied petroleum gas torches, and cigarette lighters shall not be used to...

30 CFR 57.6502 - Safety fuse.

Code of Federal Regulations, 2013 CFR

2013-07-01

... least the minimum burning time for a particular size round, as specified in the following table: Table E... blasthole detonates. (d) Fuse shall be cut and capped in dry locations. (e) Blasting caps shall be crimped... with devices designed for that purpose. Carbide lights, liquefied petroleum gas torches, and cigarette...

30 CFR 56.6502 - Safety fuse.

Code of Federal Regulations, 2012 CFR

2012-07-01

... a particular size round, as specified in the following table: Table E-1—Safety Fuse—Minimum Burning... be cut and capped in dry locations. (e) Blasting caps shall be crimped to fuse only with implements... purpose. Carbide lights, liquefied petroleum gas torches, and cigarette lighters shall not be used to...

30 CFR 56.6502 - Safety fuse.

Code of Federal Regulations, 2011 CFR

2011-07-01

... a particular size round, as specified in the following table: Table E-1—Safety Fuse—Minimum Burning... be cut and capped in dry locations. (e) Blasting caps shall be crimped to fuse only with implements... purpose. Carbide lights, liquefied petroleum gas torches, and cigarette lighters shall not be used to...

30 CFR 57.6502 - Safety fuse.

Code of Federal Regulations, 2012 CFR

2012-07-01

... least the minimum burning time for a particular size round, as specified in the following table: Table E... blasthole detonates. (d) Fuse shall be cut and capped in dry locations. (e) Blasting caps shall be crimped... with devices designed for that purpose. Carbide lights, liquefied petroleum gas torches, and cigarette...

49 CFR 194.107 - General response plan requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

...-situ burning and dispersants as provided for in the applicable ACPs; and (2) As a minimum, to be... threat” term is equivalent to abnormal operations outlined in 49 CFR 195.402(d). To comply with this... its manual for operations, maintenance, and emergencies, which is prepared in compliance with 49 CFR...

49 CFR 194.107 - General response plan requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

...-situ burning and dispersants as provided for in the applicable ACPs; and (2) As a minimum, to be... threat” term is equivalent to abnormal operations outlined in 49 CFR 195.402(d). To comply with this... its manual for operations, maintenance, and emergencies, which is prepared in compliance with 49 CFR...

49 CFR 194.107 - General response plan requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

...-situ burning and dispersants as provided for in the applicable ACPs; and (2) As a minimum, to be... threat” term is equivalent to abnormal operations outlined in 49 CFR 195.402(d). To comply with this... its manual for operations, maintenance, and emergencies, which is prepared in compliance with 49 CFR...

49 CFR 194.107 - General response plan requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

...-situ burning and dispersants as provided for in the applicable ACPs; and (2) As a minimum, to be... threat” term is equivalent to abnormal operations outlined in 49 CFR 195.402(d). To comply with this... its manual for operations, maintenance, and emergencies, which is prepared in compliance with 49 CFR...

7 CFR 993.97 - Exhibit A; minimum standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... condition; (3) end cracks; (4) fermentation; (5) skin or flesh damage; (6) scab; (7) burned; (8) mold; (9...) Fermentation means damage to the flesh by fermentation to the extent that the characteristic appearance or..., and decay shall not exceed five percent (5%). (3) The combined tolerance allowance for fermentation...

Predictors of sustaining burn injury: does the use of common prevention strategies matter?

PubMed

Taira, Breena R; Cassara, Guy; Meng, Hongdao; Salama, Michael N; Chohan, Jasmine; Sandoval, Steven; Singer, Adam J

2011-01-01

The incidence of burn injury has decreased over the past several decades. Although this has been largely attributed to increased prevention awareness, few studies evaluate the effectiveness of implementing standard burn prevention strategies in preventing burn injury. The authors hypothesized that patients who sustain burns use burn prevention strategies less frequently than those who do not. This was a case-control study composed of a prospective survey questionnaire and retrospective burn registry query, which was performed in a suburban academic medical center with a burn unit. All burn patients seen by the burn service in the year 2008 and a nonrandom sample of nonburned emergency department patients and visitors during the same time period were enrolled. Demographics included age, gender, income, education, house type, insurance status, and prevention strategy usage including smoke alarms, carbon monoxide detectors, fire extinguishers, and escape plans. The primary outcome of interest in this study was burn injury. Chi-square tests were used to compare rates, Student's t-tests were used to compare mean values of continuous variables between burn patients and others, and multivariate logistic regression was used to determine the strongest predictors of sustaining burn injury. One hundred ninety-four burn patients and 348 nonburned emergency department patients and visitors were surveyed. Burn patients reported the same rates of smoke alarm usage (96.9 vs 96.3%, P = .692), carbon monoxide detectors (75.3 vs 67.2%, P = .05), and higher rates of fire extinguisher ownership (80.4 vs 72.7%, P = .045) when compared with others. In multivariable analysis, the strongest predictor of sustaining burn injury was less than high school education (odds ratio [OR] 3.61, 95% confidence interval [CI] 1.27-10.27), whereas English as a primary language (OR 0.48, 95% CI 0.26-0.89), a graduate degree (OR 0.10, 95% CI 0.02-0.42), income >$50,000 (OR 0.46, 95% CI 0.29-0.72), and keeping flammable liquids in a locked place (OR 0.59, 95% CI 0.44-0.80) were protective against burn injury. Smoke alarms (OR 0.75, 95% CI 0.22-2.61), fire extinguishers (OR 1.34, 95% CI 0.80-2.32), and having an escape plan (OR 0.85, 95% CI 0.56-1.29) were not protective. Patients who sustain burn injury use burn prevention strategies at similar rates when compared with those who do not. When holding demographic characteristics constant, utilization of most burn prevention strategies is not protective of sustaining burn injury. Those with lower levels of education and income remain more susceptible to burn injury.

40 CFR 60.106 - Test methods and procedures.

Code of Federal Regulations, 2012 CFR

2012-07-01

... determine opacity. (c) If auxiliary liquid or solid fossil-fuels are burned in an incinerator-waste heat... rate from solid or liquid fossil fuel, million J/hr (million Btu/hr). Rc = Coke burn-off rate, Mg coke... supplemental gaseous, liquid, or solid fossil fuel is burned, testing shall be conducted at a point between the...

40 CFR 60.106 - Test methods and procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... determine opacity. (c) If auxiliary liquid or solid fossil-fuels are burned in an incinerator-waste heat... rate from solid or liquid fossil fuel, million J/hr (million Btu/hr). Rc = Coke burn-off rate, Mg coke... supplemental gaseous, liquid, or solid fossil fuel is burned, testing shall be conducted at a point between the...

40 CFR 60.106 - Test methods and procedures.

Code of Federal Regulations, 2011 CFR

2011-07-01

... determine opacity. (c) If auxiliary liquid or solid fossil-fuels are burned in an incinerator-waste heat... rate from solid or liquid fossil fuel, million J/hr (million Btu/hr). Rc = Coke burn-off rate, Mg coke... supplemental gaseous, liquid, or solid fossil fuel is burned, testing shall be conducted at a point between the...

Combustion of a Polymer (PMMA) Sphere in Microgravity

NASA Technical Reports Server (NTRS)

Yang, Jiann C.; Hamins, Anthony; Donnelly, Michelle K.

1999-01-01

A series of low gravity, aircraft-based, experiments was conducted to investigate the combustion of supported thermoplastic polymer spheres under varying ambient conditions. The three types of thermoplastic investigated were polymethylmethacrylate (PMMA), polypropylene (PP). and polystyrene (PS). Spheres with diameters ranging from 2 mm to 6.35 mm were tested. The total initial pressure varied from 0.05 MPa to 0. 15 MPa whereas the ambient oxygen concentration varied from 19 % to 30 % (by volume). The ignition system consisted of a pair of retractable energized coils. Two CCD cameras recorded the burning histories of the spheres. The video sequences revealed a number of dynamic events including bubbling and sputtering, as well as soot shell formation and break-up during combustion of the spheres at reduced gravity. The ejection of combusting material from the burning spheres represents a fire hazard that must be considered at reduced gravity. The ejection process was found to be sensitive to polymer type. All average burning rates were measured to increase with initial sphere diameter and oxygen concentration, whereas the initial pressure had little effect. The three thermoplastic types exhibited different burning characteristics. For the same initial conditions, the burning rate of PP was slower than PMMA, whereas the burning rate of PS was comparable to PMMA. The transient diameter of the burning thermoplastic exhibited two distinct periods: an initial period (enduring approximately half of the total burn duration) when the diameter remained approximately constant, and a final period when the square of the diameter linearly decreased with time. A simple homogeneous two-phase model was developed to understand the changing diameter of the burning sphere. Its value is based on a competition between diameter reduction due to mass loss from burning and sputtering, and diameter expansion due to the processes of swelling (density decrease with heating) and bubble growth. The model relies on empirical parameters for input, such as the burning rate and the duration of the initial and final burning periods.

[Epidemiological investigation on 2 133 hospitalized patients with electrical burns].

PubMed

Jiang, M J; Li, Z; Xie, W G

2017-12-20

Objective: To analyze the epidemiological characteristics of the hospitalized patients with electrical burns in Institute of Burns of Tongren Hospital of Wuhan University & Wuhan Third Hospital (hereinafter referred to as Institute of Burns of Wuhan Third Hospital), so as to provide reference for the prevention and treatment of electrical burns. Methods: Medical records of all hospitalized burn patients in Institute of Burns of Wuhan Third Hospital from January 2004 to December 2016 were collected. Genders, ages, social categories, seasons of injury, total burn areas, depths of wounds, electrical voltages of injury, sites of wound, treatment methods, amputation rates, lengths of hospital stay, operation costs, hospitalization costs, and treatment outcomes of the electrical burn patients were collected. Treatment methods, lengths of hospital stay, operation costs, and hospitalization costs of the thermal burn patients were collected and compared with those of the electrical burn patients. Electrical voltages of injury, amputation rates, operation costs, hospitalization costs, and treatment outcomes were compared and analyzed between the electrical contact burn patients and the electrical arc burn patients. Data were processed with Chi-square test and Wilcoxon rank-sum test. Results: During the 13 years, 23 534 burn patients were admitted to Institute of Burns of Wuhan Third Hospital, among whom 2 133 (9.1%) were with electrical burns, without obvious variation in admission number of electrical burn patients every year. There were 1 418 patients (66.5%) with electrical contact burns and 715 patients (33.5%) with electrical arc burns. The ratio of male to female was 11.2∶1.0 among the electrical burn patients with known genders. The proportions of three age groups of more than 20 years old and less than or equal to 30 years old, more than 30 years old and less than or equal to 40 years old, and more than 40 years old and less than or equal to 50 years old were relatively higher, which were 18.3% (391/2 133), 22.1% (471/2 133), and 24.6% (525/2 133), respectively. The first three social category groups in proportions were workers, peasants, and preschool children, which were 57.9% (1 235/2 133), 14.6% (311/2 133), and 6.0% (128/2 133), respectively. Among the electrical burn patients with known seasons of injury, most cases were injured in summer (659 cases, accounting for 34.1%), obviously more than the proportions in autumn (537 cases, accounting for 27.8%), spring (455 cases, accounting for 23.5%), and winter (283 cases, accounting for 14.6%), with χ (2) values from 8.414 to 149.573, P values below 0.01. The group of patients with total burn areas less than 10% total body surface area (TBSA) occupied the highest proportion (1 603 cases, accounting for 75.15%), among whom 229 (10.74%) were with scattered small wounds which were less than 1% TBSA. The percentage of electrical contact burn patients with deep wounds was 79.1% (1 122/1 418), which was obviously higher than 2.5% (18/715) of the electrical arc burn patients ( χ (2)=381.741, P <0.001). Among the patients with known electrical voltages of injury, patients injured by high voltage among the electrical contact burn patients accounted for 78.4% (469/598), which was obviously higher than 8.7% (11/127) of the electrical arc burn patients ( χ (2)=227.893, P <0.001). The most common wound site of the electrical burn patients was upper limbs (1 650 cases, accounting for 63.2%), followed by lower limbs (382 cases, accounting for 14.6%), head and neck (292 cases, accounting for 11.2%), trunk (247 cases, accounting for 9.5%), and hip and perineum (40 cases, accounting for 1.5%). The operation rate of electrical burn patients was 32.4% (691/2 133), obviously higher than 19.1% (3 860/20 209)of the thermal burn patients during the same period ( χ (2)=210.255, P <0.001). Wounds of 116 electrical contact burn patients were repaired with free flap by vascular anastomosis, of which 9 (7.8%) failed. The length of hospital stay, the operation cost, and the hospitalization cost of electrical burn patients were (28±29) d, (9 534±16 935) and (44 258±93 012) Yuan, respectively, obviously longer or higher than those of the thermal burn patients during the same period [(17±19) d, (2 990±8 916) and (23 291±88 340) Yuan, respectively, with Z values from -21.323 to -10.996, P values below 0.001]. The amputation rate and the death rate of electrical burn patients were 3.8% (82/2 133) and 0.8% (16/2 133) respectively. Compared with those of electrical arc burn patients, the amputation rate and the operation cost of electrical contact burn patients were obviously higher ( χ (2)=36.970, Z =-11.351, P values below 0.001), and the length of hospital stay of electrical contact burn patients was obviously longer ( Z =-5.181, P <0.001). There were no significant differences in hospitalization cost and treatment outcome between the electrical contact burn patients and the electrical arc burn patients ( Z =-1.461, χ (2)=1.673, P values above 0.05). Conclusions: The number and the proportion of hospitalized electrical burn patients in Institute of Burns of Wuhan Third Hospital were relatively high, indicating a hard task of prevention for electrical burns in Wuhan area. Working-age workers and farmers, and preschool children were the key groups in prevention from electrical burns. The length of hospital stay, the operation cost, and the hospitalization cost of electrical burn patients were obviously higher than those of thermal burn patients. The amputation rate and the operation cost of electrical contact burn patients were obviously higher than those of electrical arc burn patients, but there were no obvious differences in hospitalization cost or treatment outcome between them. Actively using tissue flaps including free flap to repair of wounds may be helpful to reduce the amputation rate, improve the results, and shorten the time of treatment.

Application of Climate Impact Metrics to Rotorcraft Design

NASA Technical Reports Server (NTRS)

Russell, Carl; Johnson, Wayne

2013-01-01

Multiple metrics are applied to the design of large civil rotorcraft, integrating minimum cost and minimum environmental impact. The design mission is passenger transport with similar range and capacity to a regional jet. Separate aircraft designs are generated for minimum empty weight, fuel burn, and environmental impact. A metric specifically developed for the design of aircraft is employed to evaluate emissions. The designs are generated using the NDARC rotorcraft sizing code, and rotor analysis is performed with the CAMRAD II aeromechanics code. Design and mission parameters such as wing loading, disk loading, and cruise altitude are varied to minimize both cost and environmental impact metrics. This paper presents the results of these parametric sweeps as well as the final aircraft designs.

Application of Climate Impact Metrics to Civil Tiltrotor Design

NASA Technical Reports Server (NTRS)

Russell, Carl R.; Johnson, Wayne

2013-01-01

Multiple metrics are applied to the design of a large civil tiltrotor, integrating minimum cost and minimum environmental impact. The design mission is passenger transport with similar range and capacity to a regional jet. Separate aircraft designs are generated for minimum empty weight, fuel burn, and environmental impact. A metric specifically developed for the design of aircraft is employed to evaluate emissions. The designs are generated using the NDARC rotorcraft sizing code, and rotor analysis is performed with the CAMRAD II aeromechanics code. Design and mission parameters such as wing loading, disk loading, and cruise altitude are varied to minimize both cost and environmental impact metrics. This paper presents the results of these parametric sweeps as well as the final aircraft designs.

Burn leads to long-term elevated admissions to hospital for gastrointestinal disease in a West Australian population based study.

PubMed

Stevenson, Andrew W; Randall, Sean M; Boyd, James H; Wood, Fiona M; Fear, Mark W; Duke, Janine M

2017-05-01

While the most obvious impact of burn is on the skin, systemic responses also occur after burn, including intestinal inflammation. The objective of this study was to assess if burns are associated with increased long-term admissions for gastrointestinal diseases. A population-based longitudinal study using linked hospital morbidity and death data from Western Australia was undertaken of adults aged at least 15 years when hospitalized for a first burn (n=20,561) in 1980-2012. A frequency matched non-injury comparison cohort was randomly selected from Western Australia's birth registrations and electoral roll (n=80,960). Crude admission rates and summed days in hospital for digestive diseases were calculated. Negative binomial and Cox proportional hazards regression modeling were used to generate incidence rate ratios (IRR) and hazard ratios (HR), respectively. After adjustment for demographic factors and pre-existing health status, the burn cohort had 1.54 times (95% confidence interval (CI): 1.47-1.62) as many admissions and almost three times the number of days in hospital with a digestive system diagnosis (IRR, 95% CI: 2.90, 2.60-3.25) than the uninjured cohort. Significantly elevated adjusted post-burn incident rates were identified, with the risk decreasing with increasing time: in the first month (HR, 95% CI: 3.02, 1.89-4.82), from one month to five years (HR, 95% CI: 1.42, 1.31-1.54), and from five to twenty years after burn (HR, 95% CI: 1.13, 1.06-1.20). Findings of increased hospital admission rates and prolonged length of hospital stay for gastrointestinal diseases in the burn cohort provide evidence to support that burns have effects that persist long after the initial injury. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Thermal Decomposition Behaviors and Burning Characteristics of AN/Nitramine-Based Composite Propellant

NASA Astrophysics Data System (ADS)

Naya, Tomoki; Kohga, Makoto

2015-04-01

Ammonium nitrate (AN) has attracted much attention due to its clean burning nature as an oxidizer. However, an AN-based composite propellant has the disadvantages of low burning rate and poor ignitability. In this study, we added nitramine of cyclotrimethylene trinitramine (RDX) or cyclotetramethylene tetranitramine (HMX) as a high-energy material to AN propellants to overcome these disadvantages. The thermal decomposition and burning rate characteristics of the prepared propellants were examined as the ratio of AN and nitramine was varied. In the thermal decomposition process, AN/RDX propellants showed unique mass loss peaks in the lower temperature range that were not observed for AN or RDX propellants alone. AN and RDX decomposed continuously as an almost single oxidizer in the AN/RDX propellant. In contrast, AN/HMX propellants exhibited thermal decomposition characteristics similar to those of AN and HMX, which decomposed almost separately in the thermal decomposition of the AN/HMX propellant. The ignitability was improved and the burning rate increased by the addition of nitramine for both AN/RDX and AN/HMX propellants. The increased burning rates of AN/RDX propellants were greater than those of AN/HMX. The difference in the thermal decomposition and burning characteristics was caused by the interaction between AN and RDX.

A One-Dimensional Global-Scaling Erosive Burning Model Informed by Blowing Wall Turbulence

NASA Technical Reports Server (NTRS)

Kibbey, Timothy P.

2014-01-01

This paper makes no attempt to comprehensively review erosive burning models or the data collected in pursuit of them; the interested reader could begin with Landsbaum for a historical summary. However, a discussion and comparison to recent work by McDonald and Rettenmaier and Heister will be included, along with data generated by Strand, et. al. Suffice it to say that the search for a way to predict erosive burning in any size motor with formulas cleanly applicable to a typical 1D ballistics analysis has been long thwarted. Some models were based on testing that failed to adequately simulate the solid rocket motor environment. In most cases, no real-time burn rate measurement was available. Two popular models, even when calibrated to recent motor-like real-time burn rate data obtained by Furfaro, were shown by McMillin to be inadequate at modeling erosive burning in the Space Shuttle Reusable Solid Rocket Motor (RSRM), the Space Launch Systems' Five-Segment RSRM (RSRMV), and the five-segment Engineering Test Motor (ETM)-3. Subsequently to the data cited from Strand and Furfaro, additional motors of the same kind as Furfaro's were tested with RSRMV propellant, utilizing 7 segments per motor and 3 throat sizes. By measuring propellant web thickness with ultrasonic gages, the burn rate was determined at cross-flow Mach numbers up to Mach 0.8. Furthermore, because of the different throat sizes in otherwise identical motors, this provides a unique look at the effect of pressure and base burn rate on the erosive response. Figure 1 shows example of the data pertaining to the high Mach motor, where the port area is initially less than the throat area. The burn rate data was processed using a smoothing method developed to reduce the noise without too severely introducing end effects that limit the range of useful data. Then, an empirical ballistics scheme was used to estimate the flow condition based on the burn rate measurements and pressure measured between each segment.

40 CFR 60.106 - Test methods and procedures.

Code of Federal Regulations, 2014 CFR

2014-07-01

... determine opacity. (c) If auxiliary liquid or solid fossil-fuels are burned in an incinerator-waste heat... rate from solid or liquid fossil fuel, GJ/hr (million Btu/hr). Rc = Coke burn-off rate, Mg coke/hr (ton... supplemental gaseous, liquid, or solid fossil fuel is burned, testing shall be conducted at a point between the...

40 CFR 60.106 - Test methods and procedures.

Code of Federal Regulations, 2013 CFR

2013-07-01

... determine opacity. (c) If auxiliary liquid or solid fossil-fuels are burned in an incinerator-waste heat... rate from solid or liquid fossil fuel, GJ/hr (million Btu/hr). Rc = Coke burn-off rate, Mg coke/hr (ton... supplemental gaseous, liquid, or solid fossil fuel is burned, testing shall be conducted at a point between the...

The correlation between burn mortality rates from fire and flame and economic status of countries.

PubMed

Peck, Michael; Pressman, Melissa A

2013-09-01

Over 95% of burn deaths occur in low- and middle-income countries globally. However, the association between burn mortality rates and economic health has not been evaluated for individual countries. This study seeks to answer the question, how strong is the correlation between burn mortality and national indices of economic strength? A retrospective review was performed for 189 countries during 2008-2010 using economic data from the World Bank as well as mortality data from the World Health Organization (WHO). Countries were categorized into four groups based on income level according to stratification by the World Bank: low income, lower middle income, upper middle income, and high income. The Pearson correlation coefficient was used to estimate presence and strength of association among death rates, Gini coefficient (measure of inequality of distribution of wealth), gross domestic product (GDP) per capita, and gross national index (GNI) per capita. Statistically significant associations (p<0.05) were found between burn mortality and GDP per capita (r=-0.26), GNI per capita (r=-0.36), and Gini (r=+0.17). A nation's income level is negatively correlated with burn mortality; the lower the income level, the higher the burn mortality rates. The degree to which income within a country is equitably or inequitably distributed also correlates with burn mortality. Both governmental and non-governmental organizations need to focus on preventing burns in low-income countries, as well as in other countries in which there is marked disparity of income. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Estimated Minimum Discharge Rates of the Deepwater Horizon Spill-Interim Report to the Flow Rate Technical Group from the Mass Balance Team

USGS Publications Warehouse

Labson, Victor F.; Clark, Roger N.; Swayze, Gregg A.; Hoefen, Todd M.; Kokaly, Raymond F.; Livo, K. Eric; Powers, Michael H.; Plumlee, Geoffrey S.; Meeker, Gregory P.

2010-01-01

All of the calculations and results in this report are preliminary and intended for the purpose, and only for the purpose, of aiding the incident team in assessing the extent of the spilled oil for ongoing response efforts. Other applications of this report are not authorized and are not considered valid. Because of time constraints and limitations of data available to the experts, many of their estimates are approximate, are subject to revision, and certainly should not be used as the Federal Government's final values for assessing volume of the spill or its impact to the environment or to coastal communities. Each expert that contributed to this report reserves the right to alter his conclusions based upon further analysis or additional information. An estimated minimum total oil discharge was determined by calculations of oil volumes measured as of May 17, 2010. This included oil on the ocean surface measured with satellite and airborne images and with spectroscopic data (129,000 barrels to 246,000 barrels using less and more aggressive assumptions, respectively), oil skimmed off the surface (23,500 barrels from U.S. Coast Guard [USCG] estimates), oil burned off the surface (11,500 barrels from USCG estimates), dispersed subsea oil (67,000 to 114,000 barrels), and oil evaporated or dissolved (109,000 to 185,000 barrels). Sedimentation (oil captured from Mississippi River silt and deposited on the ocean bottom), biodegradation, and other processes may indicate significant oil volumes beyond our analyses, as will any subsurface volumes such as suspended tar balls or other emulsions that are not included in our estimates. The lower bounds of total measured volumes are estimated to be within the range of 340,000 to 580,000 barrels as of May 17, 2010, for an estimated average minimum discharge rate of 12,500 to 21,500 barrels per day for 27 days from April 20 to May 17, 2010.

Long-term musculoskeletal morbidity after adult burn injury: a population-based cohort study

PubMed Central

Randall, Sean M; Fear, Mark W; Wood, Fiona M; Rea, Suzanne; Boyd, James H; Duke, Janine M

2015-01-01

Objective To investigate if adults who are hospitalised for a burn injury have increased long-term hospital use for musculoskeletal diseases. Design A population-based retrospective cohort study using linked administrative health data from the Western Australian Data Linkage System. Subjects Records of 17 753 persons aged at least 20 years when hospitalised for a first burn injury in Western Australia during the period 1980–2012, and 70 758 persons who were age and gender-frequency matched with no injury admissions randomly selected from Western Australia's electoral roll. Main outcome measures Admission rates and cumulative length of stay for musculoskeletal diseases. Negative binomial and Cox proportional hazards regression modelling were used to generate incidence rate ratios (IRR) and HRs with 95% CIs, respectively. Results After adjustment for pre-existing health status and demographic characteristics, the burn cohort had almost twice the hospitalisation rate for a musculoskeletal condition (IRR, 95% CI 1.98, 1.86 to 2.10), and spent 3.70 times as long in hospital with a musculoskeletal diagnosis (95% CI 3.10 to 4.42) over the 33-year period, than the uninjured comparison cohort. Adjusted survival analyses of incident post-burn musculoskeletal disease admissions found significant increases for the 15-year post burn discharge period (0–6 months: HR, 95% CI 2.51, 2.04 to 3.11; 6 months–2 years: HR, 95% CI 1.77, 1.53 to 2.05; 2–15 years: HR, 95% CI 1.32, 1.23 to 1.42). Incident admission rates were significantly elevated for 20 years post-burn for minor and severe burn injury for a range of musculoskeletal diseases that included arthropathies, dorsopathies, osteopathies and soft tissue disorders. Conclusions Minor and severe burn injuries were associated with significantly increased post-burn incident admission rates, long-term hospital use and prolonged length of stay for a range of musculoskeletal diseases. Further research is required that facilitates identification of at-risk patients and appropriate treatment pathways, to reduce the long-term morbidity associated with burns. PMID:26362668

Hydrogen Burning in Low Mass Stars Constrains Scalar-Tensor Theories of Gravity.

PubMed

Sakstein, Jeremy

2015-11-13

The most general scalar-tensor theories of gravity predict a weakening of the gravitational force inside astrophysical bodies. There is a minimum mass for hydrogen burning in stars that is set by the interplay of plasma physics and the theory of gravity. We calculate this for alternative theories of gravity and find that it is always significantly larger than the general relativity prediction. The observation of several low mass red dwarf stars therefore rules out a large class of scalar-tensor gravity theories and places strong constraints on the cosmological parameters appearing in the effective field theory of dark energy.

Titanium subhydride potassium perchlorate (TiH1.65/KClO4) burn rates from hybrid closed bomb-strand burner experiments.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cooper, Marcia A.; Oliver, Michael S.

2012-08-01

A hybrid closed bomb-strand burner is used to measure the burning behavior of the titanium subhydride potassium perchlorate pyrotechnic with an equivalent hydrogen concentration of 1.65. This experimental facility allows for simultaneous measurement of the closed bomb pressure rise and pyrotechnic burn rate as detected by electrical break wires over a range of pressures. Strands were formed by pressing the pyrotechnic powders to bulk densities between 60% and 90% theoretical maximum density. The burn rate dependance on initial density and vessel pressure are measured. At all initial strand densities, the burn is observed to transition from conductive to convective burningmore » within the strand. The measured vessel pressure history is further analyzed following the closed bomb analysis methods developed for solid propellants.« less

Mechanisms of microgravity flame spread over a thin solid fuel - Oxygen and opposed flow effects

NASA Technical Reports Server (NTRS)

Olson, S. L.

1991-01-01

Microgravity tests varying oxygen concentration and forced flow velocity have examined the importance of transport processes on flame spread over very thin solid fuels. Flame spread rates, solid phase temperature profiles and flame appearance for these tests are measured. A flame spread map is presented which indicates three distinct regions where different mechanisms control the flame spread process. In the near-quenching region (very low characteristic relative velocities) a new controlling mechanism for flame spread - oxidizer transport-limited chemical reaction - is proposed. In the near-limit, blowoff region, high opposed flow velocities impose residence time limitations on the flame spread process. A critical characteristic relative velocity line between the two near-limit regions defines conditions which result in maximum flammability both in terms of a peak flame spread rate and minimum oxygen concentration for steady burning. In the third region, away from both near-limit regions, the flame spread behavior, which can accurately be described by a thermal theory, is controlled by gas-phase conduction.

Liquid oxygen/metal gelled monopropellants

NASA Technical Reports Server (NTRS)

Wickman, John H.

1991-01-01

The objectives of this program were to establish the feasibility of metallized/liquid oxygen monopropellants and select the best monopropellant formulation for continued study. The metal powders mixed with the liquid oxygen were aluminum/magnesium (80/20), silicon and iron (Iron was only tested for burning properties). The formulations were first evaluated on whether they detonated when ignited or burned. The formulations only burned when ignited. The viscosity for the formulations ranged from 900 cps to 100 cps at shear rates up to 300 seconds(sup -1). Two percent (by weight) of Cab-O-Sil was added to the aluminum and aluminum/magnesium formulations for gelling while the silicon formulation used three percent. Within a seven hour period, settling was suggested only in the 29 percent aluminum and 29 percent aluminum/magnesium formulations. The monopropellants were burned in a cylinder submerged in a liquid nitrogen bath. Experimental data at ambient pressure indicated that the monopropellants were extinguished when the flame front reached regions submerged under the liquid nitrogen. The burn rate increased dramatically when burned in a cylinder enclosure with less heat sink available to the monopropellant. The test results were inconclusive as to whether the increased burn rate was due to the lower heat sink capacity or the small amount of pressure (2 psi) generated during the burning of the monopropellant. The burning of the aluminum and aluminum/magnesium resulted in a brilliant white flame similar to that of an arc welder. These monopropellants burned in a pulsating manner with the aluminum/magnesium appearing to have less pulsating combustion. The silicon monopropellant burned with an orange glow. No sparks or energetic burning was apparent as with the aluminum or aluminum/magnesium.

Evaluating the role of alternative therapy in burn wound management: randomized trial comparing moist exposed burn ointment with conventional methods in the management of patients with second-degree burns.

PubMed

Ang, E S; Lee, S T; Gan, C S; See, P G; Chan, Y H; Ng, L H; Machin, D

2001-03-06

Moist exposed burn ointment (MEBO), from China, has been said to revolutionize burn management. Our study was conducted to compare MEBO with conventional management (C) with respect to the rate of wound healing, antibacterial and analgesic effect, and hospital costs. This is a prospective, randomized, controlled clinical trial conducted between 1 March 1997 and 24 October 1998. The trial was conducted in a specialized burn facility located in a tertiary referral hospital in a developed and industrialized island-state in Southeast Asia. We randomly assigned 115 consecutive patients between the ages of 12 and 80 who had partial-thickness thermal burns covering less than 40% of body surface area (BSA) to receive either MEBO or C. Fifty-seven patients were assigned to MEBO and 58 patients to C. The latter group received twice-daily dressing changes; MEBO patients received MEBO every 4 hours. Patients were hospitalized until 75% BSA had healed. BSA was determined by visual inspection and charted on Lund and Browder charts regularly. Wound healing rate, bacterial infection rate, pain score, and hospitalization costs were recorded. The median time to 75% healing was 17.0 and 20.0 days with MEBO and C, respectively (HR = 0.67, 95% CI = 0.41-1.11, P =.11), suggesting similar efficacy between the 2 modalities. Bacterial infection rates were similar between the 2 groups (HR = 1.10, 95% CI = 0.59-2.03, P =.76). MEBO imparted a greater analgesic effect in the first 5 days of therapy and reduced hospital costs by 8%. MEBO is as effective as conventional management but is not the panacea for all burn wounds. The use of MEBO eases the management of face and neck burns and facilitates early institution of occupational therapy in hand burns. It confers better pain relief such that fewer opiates are used during the first 5 days after burn injury.

Determinants of skeletal muscle protein turnover following severe burn trauma in children.

PubMed

Malagaris, Ioannis; Herndon, David N; Polychronopoulou, Efstathia; Rontoyanni, Victoria G; Andersen, Clark R; Suman, Oscar E; Porter, Craig; Sidossis, Labros S

2018-06-04

Burns remain the fifth cause of non-fatal pediatric injuries globally, with muscle cachexia being a hallmark of the stress response to burns. Burn-induced muscle wasting is associated with morbidity, yet the determinants of muscle protein catabolism in response to burn trauma remains unclear. Our objective was to determine the effect of patient and injury characteristics on muscle protein kinetics in burn patients. This retrospective, observational study was performed using protein kinetic data from pediatric patients who had severe burns (>30% of the total body surface area burned) and underwent cross-limb stable isotope infusions between 1999 and 2008 as part of prospective clinical trials. Mixed multiple regression models were used to assess associations between patient/injury characteristics and muscle protein fractional synthesis rate (FSR), net balance (NB), and rates of phenylalanine appearance (Ra; index of protein breakdown) and disappearance (Rd; index of protein synthesis) across the leg. A total of 268 patients who underwent 499 studies were analyzed. Increasing time post injury was associated with greater FSR (p < 0.001) and NB (p = 0.01). Males were more catabolic than females (as indicated by lower NB, p = 0.04 and greater Ra, p = 0.008), a consequence of higher protein breakdown rather than lower synthesis. Increasing burn size was associated with higher protein synthesis rate (as indicated by higher FSR, p = 0.019) and higher protein breakdown rates (as indicated by greater Ra, p = 0.001). FSR was negatively associated with age (p < 0.001). Data from this large patient cohort show that injury severity, sex, and time post injury influence skeletal muscle wasting in burned children. These findings suggest that individual patient characteristics should be considered when devising therapies to improve the acute care and rehabilitation of burn survivors. Copyright © 2018 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

Safety and efficacy of excision and direct closure in acute burns surgery: outcome analysis in a prospective series of 100 patients and a survey of UK burns surgeons' attitudes.

PubMed

Bain, Charles J; Wang, Tim; McArthur, Gordon; Williams, Greg; Atkins, Joanne; Jones, Isabel

2014-12-01

Many burns surgeons avoid excision and direct closure of acute burns owing to concerns over wound dehiscence, scarring and infection. There is no evidence in the literature to support this practice. We present outcomes of a prospective series of 100 patients who underwent excision and direct closure of 138 burns over a 2-year period, along with results from a survey sent to 33 senior burns surgeons to gauge attitudes towards direct closure in burns surgery. 47% of survey respondents never perform direct closure. Dehiscence was cited as the most common concern, followed by hypertrophic scarring (HTS). In our cohort, the superficial dehiscence rate was 12% and the HTS rate was 16%, with no scarring contractures. Patients with healing time greater than 14 days were more likely to develop HTS (p=0.008), as were those with wound dehiscence (p=0.014). Patients undergoing part-grafting in addition to direct closure took significantly longer to heal than those undergoing direct closure alone (p=0.0002), with the donor site or graft delaying healing in the majority. Excision and direct closure of acute burn wounds avoids donor site morbidity and has an acceptable complication rate. It is a safe and effective treatment for full thickness burns in selected cases. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Irradiation performance of PFBR MOX fuel after 112 GWd/t burn-up

NASA Astrophysics Data System (ADS)

Venkiteswaran, C. N.; Jayaraj, V. V.; Ojha, B. K.; Anandaraj, V.; Padalakshmi, M.; Vinodkumar, S.; Karthik, V.; Vijaykumar, Ran; Vijayaraghavan, A.; Divakar, R.; Johny, T.; Joseph, Jojo; Thirunavakkarasu, S.; Saravanan, T.; Philip, John; Rao, B. P. C.; Kasiviswanathan, K. V.; Jayakumar, T.

2014-06-01

The 500 MWe Prototype Fast Breeder Reactor (PFBR) which is in advanced stage of construction at Kalpakkam, India, will use mixed oxide (MOX) fuel with a target burnup of 100 GWd/t. The fuel pellet is of annular design to enable operation at a peak linear power of 450 W/cm with the requirement of minimum duration of pre-conditioning. The performance of the MOX fuel and the D9 clad and wrapper material was assessed through Post Irradiation Examinations (PIE) after test irradiation of 37 fuel pin subassembly in Fast Breeder Test Reactor (FBTR) to a burn-up of 112 GWd/t. Fission product distribution, swelling and fuel-clad gap evolution, central hole diameter variation, restructuring, fission gas release and clad wastage due to fuel-clad chemical interaction were evaluated through non-destructive and destructive examinations. The examinations have indicated that the MOX fuel can safely attain the desired target burn-up in PFBR.

Forest practices and stream flow in western Oregon.

Treesearch

R. Dennis. Harr

1976-01-01

Forest management activities, including roadbuilding, clearcut logging, and broadcast burning, can change certain portions of the forest hydrologic cycle. Watershed studies and other hydrologic research in the Coast and western Cascade Ranges of Oregon have shown that these changes may increase annual water yield up to 62 centimeters, double minimum flows in summer,...

Machine for row-mulching logging slash to enhance site-a concept

Treesearch

Peter Koch; Dan W. McKenzie

1975-01-01

Proposes that stumps, tops, and branches residual after logging pine plantations be hogged to build mulch beds spaced on about 2.5-m centers, thereby eliminating pile and burn operations. Growth of seedlings planted through mulch beds should be accelerated because of moisture conservation, weed suppression, and minimum disturbance of topsoil.

Study on core radius minimization for long life Pb-Bi cooled CANDLE burnup scheme based fast reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Afifah, Maryam, E-mail: maryam.afifah210692@gmail.com; Su’ud, Zaki; Miura, Ryosuke

2015-09-30

Fast Breeder Reactor had been interested to be developed over the world because it inexhaustible source energy, one of those is CANDLE reactor which is have strategy in burn-up scheme, need not control roads for control burn-up, have a constant core characteristics during energy production and don’t need fuel shuffling. The calculation was made by basic reactor analysis which use Sodium coolant geometry core parameter as a reference core to study on minimum core reactor radius of CANDLE for long life Pb-Bi cooled, also want to perform pure coolant effect comparison between LBE and sodium in a same geometry design.more » The result show that the minimum core radius of Lead Bismuth cooled CANDLE is 100 cm and 500 MWth thermal output. Lead-Bismuth coolant for CANDLE reactor enable to reduce much reactor size and have a better void coefficient than Sodium cooled as the most coolant for FBR, then we will have a good point in safety analysis.« less

The investigation of critical burning of fuel droplets

NASA Technical Reports Server (NTRS)

Allison, C. B.; Canada, G. S.; Faeth, G. M.

1973-01-01

The combustion and evaporation of liquid fuels at high pressures were investigated. Particular emphasis was placed on conditions where the liquid surface approaches the thermodynamic critical point during combustion. The influence of transient effects on a burning liquid fuel was also investigated through both analysis and measurements of the response of liquid monopropellant combustion to imposed pressure oscillations. Work was divided into four phases (1) Droplet combustion at high pressures, which consider both measurement and analysis of the porous sphere burning rate of liquids in a natural convection environment at elevated pressure. (2) High pressure droplet burning in combustion gases, which involved steady burning and evaporation of liquids from porous spheres in a high pressure environment that simulates actual combustion chamber conditions. (3) Liquid strand combustion, which considered the burning rate, the state of the liquid surface and the liquid phase temperature distribution of a burning liquid monopropellant column over a range of pressures. (4) Oscillatory combustion, which was a theoretical and experimental investigation of the response of a burning liquid monopropellant to pressure oscillations.

Assault by burning in Jordan.

PubMed

Haddadin, W

2012-12-31

Criminal attacks by burns on women in Jordan are highlighted in this retrospective study carried out of all proved cases of criminal burns in female patients treated at the burn unit of the Royal Rehabilitation Center in Jordan between January 2005 and June 2012. Thirteen patients were included in our study, out of a total of 550 patients admitted, all in the age range of 16-45 yr. Of these 13 women, six were burned by acid throwing, five by hot water, and two by direct flames from fuel thrown over them. Burn percentage ranged from 15 to 75% of the total body surface area, with involvement in most cases of the face and upper trunk. The mean hospital stay was 33 days and the mortality rate was 3/13, i.e. 23%. Violence against women exists in Jordanian society, yet burning assaults are rare. Of these, burning by throwing acid is the most common and most disfiguring act, with a higher mortality rate in domestic environments.

Assault by burning in Jordan

PubMed Central

Haddadin, W.

2012-01-01

Summary Criminal attacks by burns on women in Jordan are highlighted in this retrospective study carried out of all proved cases of criminal burns in female patients treated at the burn unit of the Royal Rehabilitation Center in Jordan between January 2005 and June 2012. Thirteen patients were included in our study, out of a total of 550 patients admitted, all in the age range of 16-45 yr. Of these 13 women, six were burned by acid throwing, five by hot water, and two by direct flames from fuel thrown over them. Burn percentage ranged from 15 to 75% of the total body surface area, with involvement in most cases of the face and upper trunk. The mean hospital stay was 33 days and the mortality rate was 3/13, i.e. 23%. Violence against women exists in Jordanian society, yet burning assaults are rare. Of these, burning by throwing acid is the most common and most disfiguring act, with a higher mortality rate in domestic environments. PMID:23766757

40 CFR 63.6590 - What parts of my plant does this subpart cover?

Code of Federal Regulations, 2012 CFR

2012-07-01

... initial notification requirements: (i) Existing spark ignition 2 stroke lean burn (2SLB) stationary RICE... spark ignition 4 stroke lean burn (4SLB) stationary RICE with a site rating of more than 500 brake HP... spark ignition 4 stroke rich burn (4SRB) stationary RICE with a site rating of less than or equal to 500...

Method and apparatus for controlling fuel/air mixture in a lean burn engine

DOEpatents

Kubesh, John Thomas; Dodge, Lee Gene; Podnar, Daniel James

1998-04-07

The system for controlling the fuel/air mixture supplied to a lean burn engine when operating on natural gas, gasoline, hydrogen, alcohol, propane, butane, diesel or any other fuel as desired. As specific humidity of air supplied to the lean burn engine increases, the oxygen concentration of exhaust gas discharged by the engine for a given equivalence ratio will decrease. Closed loop fuel control systems typically attempt to maintain a constant exhaust gas oxygen concentration. Therefore, the decrease in the exhaust gas oxygen concentration resulting from increased specific humidity will often be improperly attributed to an excessive supply of fuel and the control system will incorrectly reduce the amount of fuel supplied to the engine. Also, the minimum fuel/air equivalence ratio for a lean burn engine to avoid misfiring will increase as specific humidity increases. A relative humidity sensor to allow the control system to provide a more enriched fuel/air mixture at high specific humidity levels. The level of specific humidity may be used to compensate an output signal from a universal exhaust gas oxygen sensor for changing oxygen concentrations at a desired equivalence ratio due to variation in specific humidity specific humidity. As a result, the control system will maintain the desired efficiency, low exhaust emissions and power level for the associated lean burn engine regardless of the specific humidity level of intake air supplied to the lean burn engine.

Ignition and Combustion Studies of Hazard Division 1.1 and 1.3 Substances

DTIC Science & Technology

2010-07-01

Effect of Time at Temperature on Burning Rate. The burning rate of the HD1.1 explosive PBXN -5 is compared to that of neat cyclotetramethylene...tetranitramine (HMX) in Figure 14. The explosive, PBXN -5, is composed of 95 weight percent HMX and 5 percent Viton A as binder. The HMX burning rate...the closed bomb technique (Reference 18). The PBXN -5 was composed of small agglomerates of HMX coated with the binder (Reference 19). The PBXN -5

Combustion in an acceleration field: A survey of Soviet literature

NASA Technical Reports Server (NTRS)

Radloff, S. J.; Osborn, J. R.

1980-01-01

The effect of an acceleration field on the burning rate of a solid propellant was measured from -900g's to +1000g's using both double base and ammonium perchlorate based propellants. The acceleration fields were simulated using a centrifuge device and the burning rate was recorded. Both metalized and non-metalized variations of each propellant were tested and it was found that acceleration fields affect the burning rate. For the most part the theoretical predictions and the experimental results agreed.

Characterization of emissions from South Asian biofuels and application to source apportionment of carbonaceous aerosol in the Himalayas

NASA Astrophysics Data System (ADS)

Stone, Elizabeth A.; Schauer, James J.; Pradhan, Bidya Banmali; Dangol, Pradeep Man; Habib, Gazala; Venkataraman, Chandra; Ramanathan, V.

2010-03-01

This study focuses on improving source apportionment of carbonaceous aerosol in South Asia and consists of three parts: (1) development of novel molecular marker-based profiles for real-world biofuel combustion, (2) application of these profiles to a year-long data set, and (3) evaluation of profiles by an in-depth sensitivity analysis. Emissions profiles for biomass fuels were developed through source testing of a residential stove commonly used in South Asia. Wood fuels were combusted at high and low rates, which corresponded to source profiles high in organic carbon (OC) or high in elemental carbon (EC), respectively. Crop wastes common to the region, including rice straw, mustard stalk, jute stalk, soybean stalk, and animal residue burnings, were also characterized. Biofuel profiles were used in a source apportionment study of OC and EC in Godavari, Nepal. This site is located in the foothills of the Himalayas and was selected for its well-mixed and regionally impacted air masses. At Godavari, daily samples of fine particulate matter (PM2.5) were collected throughout the year of 2006, and the annual trends in particulate mass, OC, and EC followed the occurrence of a regional haze in South Asia. Maximum concentrations occurred during the dry winter season and minimum concentrations occurred during the summer monsoon season. Specific organic compounds unique to aerosol sources, molecular markers, were measured in monthly composite samples. These markers implicated motor vehicles, coal combustion, biomass burning, cow dung burning, vegetative detritus, and secondary organic aerosol as sources of carbonaceous aerosol. A molecular marker-based chemical mass balance (CMB) model provided a quantitative assessment of primary source contributions to carbonaceous aerosol. The new profiles were compared to widely used biomass burning profiles from the literature in a sensitivity analysis. This analysis indicated a high degree of stability in estimates of source contributions to OC when different biomass profiles were used. The majority of OC was unapportioned to primary sources and was estimated to be of secondary origin, while biomass combustion was the next-largest source of OC. The CMB apportionment of EC to primary sources was unstable due to the diversity of biomass burning conditions in the region. The model results suggested that biomass burning and fossil fuel were important contributors to EC, but could not reconcile their relative contributions.

Influence of fuel mass load, oxygen supply and burning rate on emission factor and size distribution of carbonaceous particulate matter from indoor corn straw burning.

PubMed

Shen, Guofeng; Xue, Miao; Wei, Siye; Chen, Yuanchen; Wang, Bin; Wang, Rong; Shen, Huizhong; Li, Wei; Zhang, Yanyan; Huang, Ye; Chen, Han; Wei, Wen; Zhao, Qiuyue; Li, Bin; Wu, Haisuo; Tao, Shu

2013-03-01

The uncertainty in emission estimation is strongly associated with the variation in emission factor (EF), which could be influenced by a variety of factors such as fuel properties, stove type, fire management and even methods used in measurements. The impacts of these factors are complicated and often interact with each other. Controlled burning experiments were conducted to investigate the influences of fuel mass load, air supply and burning rate on the emissions and size distributions of carbonaceous particulate matter (PM) from indoor corn straw burning in a cooking stove. The results showed that the EFs of PM (EF(PM)), organic carbon (EFoc) and elemental carbon (EF(EC)) were independent of the fuel mass load. The differences among them under different burning rates or air supply amounts were also found to be insignificant (p > 0.05) in the tested circumstances. PM from the indoor corn straw burning was dominated by fine PM with diameter less than 2.1 microm, contributing 86.4% +/- 3.9% of the total. The size distribution of PM was influenced by the burning rate and air supply conditions. On average, EF(PM), EF(OC) and EF(EC) for corn straw burned in a residential cooking stove were (3.84 +/- 1.02), (0.846 +/- 0.895) and (0.391 +/- 0.350) g/kg, respectively. EF(PM), EF(OC) and EF(EC) were found to be positively correlated with each other (p < 0.05), but they were not significantly correlated with the EF of co-emitted CO, suggesting that special attention should be paid to the use of CO as a surrogate for other incomplete combustion pollutants.

The influence of fuel mass load, oxygen supply and burning rate on emission factor and size distribution of carbonaceous particulate matter from indoor corn straw burning

PubMed Central

Shen, Guofeng; Xue, Miao; Wei, Siye; Chen, Yuanchen; Wang, Bing; Wang, Rong; Shen, Huizhong; Li, Wei; Zhang, Yanyan; Huang, Ye; Chen, Han; Wei, Wen; Zhao, Qiuyue; Li, Bin; Wu, Haisuo; Tao, Shu

2014-01-01

The uncertainty in emission estimation is strongly associated with the variation in emission factor which could be influenced by a variety of factors, like fuel property, stove type, fire management and even methods used in measurements. The impacts of these factors were usually complicated and often interacted with each other. In the present study, controlled burning experiments were conducted to investigate the influence of fuel mass load, air supply and burning rate on the emission of carbonaceous particulate matter (PM) from indoor corn straw burning. Their impacts on PM size distribution were also studied. The results showed that EFs of PM (EFPM), organic carbon (EFOC) and element carbon (EFEC) was independent of the fuel mass load. The differences among them under different burning rates or air supply amounts were also found to be insignificant (p > 0.05) in the tested circumstances. PM from the indoor corn straw burning was dominated by fine PM, and PM with diameter less than 2.1 μm contributed about 86.4±3.9% of the total. The size distribution of PM was also influenced by the burning rate and changed air supply conditions. On average, EFPM, EFOC and EFEC for corn straw burned in a residential cooking stove were 3.84±1.02, 0.846±0.895 and 0.391±0.350 g/kg, respectively. EFPM, EFOC and EFEC were found to be positively correlated with each other, but they were not significantly correlated with EF of co-emitted CO, suggesting a special attention should be paid to the use of CO acting as a surrogate for other incomplete pollutants. PMID:23923424

Long term outcomes data for the Burns Registry of Australia and New Zealand: Is it feasible?

PubMed

Gabbe, Belinda J; Cleland, Heather; Watterson, Dina M; Schrale, Rebecca; McRae, Sally; Parker, Christine; Taggart, Susan; Edgar, Dale W

2015-12-01

Incorporating routine and standardised collection of long term outcomes following burn into burn registries would improve the capacity to quantify burn burden and evaluate care. To evaluate methods for collecting the long term functional and quality of life outcomes of burns patients and establish the feasibility of implementing these outcomes into a multi-centre burns registry. Five Burns Registry of Australia and New Zealand (BRANZ) centres participated in this prospective, longitudinal study. Patients admitted to the centres between November 2009 and November 2010 were followed-up at 1, 6, 12 and 24-months after injury using measures of burn specific health, health status, fatigue, itch and return to work. Participants in the study were compared to BRANZ registered patients at the centres over the study timeframe to identify participation bias, predictors of successful follow-up were established using a Generalised Estimating Equation model, and the completion rates by mode of administration were assessed. 463 patients participated in the study, representing 24% of all BRANZ admissions in the same timeframe. Compared to all BRANZ patients in the same timeframe, the median %TBSA and hospital length of stay was greater in the study participants. The follow-up rates were 63% at 1-month, 47% at 6-months; 40% at 12-months, and 21% at 24-months after injury, and there was marked variation in follow-up rates between the centres. Increasing age, greater %TBSA and opt-in centres were associated with greater follow-up. Centres which predominantly used one mode of administration experienced better follow-up rates. The low participation rates, high loss to follow-up and responder bias observed indicate that greater consideration needs to be given to alternative models for follow-up, including tailoring the follow-up protocol to burn severity or type. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

The effect of azeotropism on combustion characteristics of blended fuel pool fire.

PubMed

Ding, Yanming; Wang, Changjian; Lu, Shouxiang

2014-04-30

The effect of azeotropism on combustion characteristics of blended fuel pool fire was experimentally studied in an open fire test space of State Key Laboratory of Fire Science. A 30 cm × 30 cm square pool filled with n-heptane and ethanol blended fuel was employed. Flame images, burning rate and temperature distribution were collected and recorded in the whole combustion process. Results show that azeotropism obviously dominates the combustion behavior of n-heptane/ethanol blended fuel pool fire. The combustion process after ignition exhibits four typical stages: initial development, azeotropic burning, single-component burning and decay stage. Azeotropism appears when temperature of fuel surface reaches azeotropic point and blended fuel burns at azeotropic ratio. Compared with individual pure fuel, the effect of azeotropism on main fire parameters, such as flame height, burning rate, flame puffing frequency and centerline temperature were analyzed. Burning rate and centerline temperature of blended fuel are higher than that of individual pure fuel respectively at azeotropic burning stage, and flame puffing frequency follows the empirical formula between Strouhal and Froude number for pure fuel. Copyright © 2014 Elsevier B.V. All rights reserved.

Erosive Burning Study Utilizing Ultrasonic Measurement Techniques

NASA Technical Reports Server (NTRS)

Furfaro, James A.

2003-01-01

A 6-segment subscale motor was developed to generate a range of internal environments from which multiple propellants could be characterized for erosive burning. The motor test bed was designed to provide a high Mach number, high mass flux environment. Propellant regression rates were monitored for each segment utilizing ultrasonic measurement techniques. These data were obtained for three propellants RSRM, ETM- 03, and Castor@ IVA, which span two propellant types, PBAN (polybutadiene acrylonitrile) and HTPB (hydroxyl terminated polybutadiene). The characterization of these propellants indicates a remarkably similar erosive burning response to the induced flow environment. Propellant burnrates for each type had a conventional response with respect to pressure up to a bulk flow velocity threshold. Each propellant, however, had a unique threshold at which it would experience an increase in observed propellant burn rate. Above the observed threshold each propellant again demonstrated a similar enhanced burn rate response corresponding to the local flow environment.

[Clinical observation of the effects of FE combined enzymes on the infection of the granulation burn wound during late post burns stage].

PubMed

Zheng, Ji; Liu, Xu-sheng; Huang, Yue-sheng; Liu, Chun-yu

2006-02-01

To observe the effects of combined FE enzymes on the infection of the granulation burn wound during late postburn stage in controlling burn wound infection caused by common antibiotic resistant bacteria. Thirty patients in our burn ward were enrolled and were randomly divided into A [treated with combined FE enzymes (50 ml dissolved in 0-150 ml normal saline to reach the final concentration of 1-3 U/ml)] and B (treated with gentamicin) groups, with 15 patients in each group. Several layers of gauze, either soaked with combined FE enzyme in A or gentamicin in B group, were used to cover the burn wounds once to twice a day. Bacterial culture from the burn wound exudation before and after drug administration was done before the application of the agents. The bacteria in the burn wounds and their susceptibility to antibiotics were identified. The healing time of the burn wounds was recorded. Furthermore, the healing rate of the burn wound was recorded on the 3rd, 5th, 8th, 10th and 12th post skin grafting days (PSGD). The dominating bacteria in the burn wounds in both groups were Pseudomonas aeruginosa, Escherichia coli, Enterobacter cloacae and MRSA. The susceptibility rate of bacteria ( MRSA, Staphylococcus epidermidis, Staphylococcus saprophyte, Pseudomonas aeruginosa, Escherichia coli and Enterobacter cloacae) to combined FE enzyme was 93.8%, 100.0%, 100.0%, 100.0%, 100.0% and 95.0% respectively, which were much higher than those in B group (17.6%, 31.3%, 28.6%, 44.0%, 33.3%, 28.0% respectively, P < 0.1. The wound healing time after skin grafting in A group (10.6 +/- 1.5 days) was significantly shorter than that in B group (15.3 +/- 1.7 days, P < 0.01). The wound healing rate on 10 PSGD in A group was (85.4 +/- 2.4)%, and which was only (51.3 +/- 1.5% in B group (P < 0.01) Combined FE enzyme can effectively control burn wound infection, so that the interval between skin grafting and wound healing can be shortened and success rate of skin grafting be improved.

Application of the cultured epidermal autograft "JACE(®") for treatment of severe burns: Results of a 6-year multicenter surveillance in Japan.

PubMed

Matsumura, Hajime; Matsushima, Asako; Ueyama, Masashi; Kumagai, Norio

2016-06-01

In the 1970s, Green et al. developed a method that involved culturing keratinocyte sheets and used for treatment of burns. Since then, the take rate of cultured epidermal autograft (CEA) onto fascia, granulation tissue, or allografts has been extensively reported, while that on an artificial dermis in a large case series is not. Moreover, the contribution of CEA to patient survival has not been analyzed in a multicenter study. We conducted a 6-year multicenter surveillance on the application of the CEA "JACE(®") for treatment of burns >30% total body surface area (TBSA) across 118 Japanese hospitals. This surveillance included 216 patients and 718 graft sites for efficacy analysis. The CEA take rate at 4 weeks after grafting was evaluated, and safety was monitored until 52 weeks. In addition, the survival curve obtained in this study and the data obtained from the Tokyo Burn Unit Association (TBUA) were compared. The mean CEA take rates at week 4 were 66% (sites) and 68% (patients), and the rate on the artificial dermis was 65% for 226 sites. CEA application combined with wide split-thickness auto or patch autograft increased the CEA take rate. On comparison with the data obtained from the TBUA, which included data on individuals with burns of the same severity, CEA application was found to contribute to patient survival until 7 weeks after burn. We reported the take rate of CEA based on a 6-year multicenter surveillance. From our results, we found that the application of CEA is a useful treatment for the patients with extensive burns. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Stabilization of burn conditions in a thermonuclear reactor using artificial neural networks

NASA Astrophysics Data System (ADS)

Vitela, Javier E.; Martinell, Julio J.

1998-02-01

In this work we develop an artificial neural network (ANN) for the feedback stabilization of a thermonuclear reactor at nearly ignited burn conditions. A volume-averaged zero-dimensional nonlinear model is used to represent the time evolution of the electron density, the relative density of alpha particles and the temperature of the plasma, where a particular scaling law for the energy confinement time previously used by other authors, was adopted. The control actions include the concurrent modulation of the D-T refuelling rate, the injection of a neutral He-4 beam and an auxiliary heating power modulation, which are constrained to take values within a maximum and minimum levels. For this purpose a feedforward multilayer artificial neural network with sigmoidal activation function is trained using a back-propagation through-time technique. Numerical examples are used to illustrate the behaviour of the resulting ANN-dynamical system configuration. It is concluded that the resulting ANN can successfully stabilize the nonlinear model of the thermonuclear reactor at nearly ignited conditions for temperature and density departures significantly far from their nominal operating values. The NN-dynamical system configuration is shown to be robust with respect to the thermalization time of the alpha particles for perturbations within the region used to train the NN.

Rates of post-fire vegetation recovery and fuel accumulation as a function of burn severity and time-since-burn in four western U.S. ecosystems

USDA-ARS?s Scientific Manuscript database

Vegetation recovery and fuel accumulation rates following wildfire are useful measures of ecosystem resilience, yet few studies have quantified these variables over 10 years post-fire. Conventional wisdom is that recovery time to pre-fire condition will be slower as a function of burn severity, as i...

Effect of pressure on rate of burning /decomposition with flame/ of liquid hydrazine.

NASA Technical Reports Server (NTRS)

Antoine, A. C.

1966-01-01

Liquid hydrazine decomposition process to determine what chemical or physical changes may be occurring that cause breaks in burning rate/ pressure curves, measuring flame temperature and light emission

Gender differences in burns: A study from emergency centres in the Western Cape, South Africa.

PubMed

Blom, Lisa; Klingberg, Anders; Laflamme, Lucie; Wallis, Lee; Hasselberg, Marie

2016-11-01

Little is known about gender differences in aetiology and management of acute burns in resource-constrained settings in South Africa. This cross-sectional study is based on burn case reports (n=1915) from eight emergency centres in Western Cape, South Africa (June 2012-May 2013). Male/female rate ratios by age group and age-specific incidence rates were compiled for urban and rural areas along with gender differences in proportions between children and adults for injury aetiology, burn severity, length of stay and patient disposition. Children 0-4 years in urban areas had the highest burn incidence but only among adults did male rates surpass females, with fire burns more common among men 20-39 years and hot liquid burns among men 55+ years. Men had a higher proportion of burns during weekends, from interpersonal violence and suspected use of alcohol/other substances, with more pronounced differences for hot liquid burns. Despite similar Abbreviated Injury Scale (AIS) scores, men were more often transferred to higher levels of care and women more often treated and discharged. Burns were far more common among children although gender differences arose only among adults. Men sustained more injuries of somewhat different aetiology and were referred to higher levels of care more often for comparable wound severity. The results suggest different disposition between men and women despite similar AIS scores. However, further studies with more comprehensive information on severity level and other care- and patient-related factors are needed to explore these results further. Copyright © 2016 The Author(s). Published by Elsevier Ltd.. All rights reserved.

Long-term mortality among older adults with burn injury: a population-based study in Australia

PubMed Central

Boyd, James H; Rea, Suzanne; Randall, Sean M; Wood, Fiona M

2015-01-01

Abstract Objective To assess if burn injury in older adults is associated with changes in long-term all-cause mortality and to estimate the increased risk of death attributable to burn injury. Methods We conducted a population-based matched longitudinal study – based on administrative data from Western Australia’s hospital morbidity data system and death register. A cohort of 6014 individuals who were aged at least 45 years when hospitalized for a first burn injury in 1980–2012 was identified. A non-injury comparison cohort, randomly selected from Western Australia’s electoral roll (n = 25 759), was matched to the patients. We used Kaplan–Meier plots and Cox proportional hazards regression to analyse the data and generated mortality rate ratios and attributable risk percentages. Findings For those hospitalized with burns, 180 (3%) died in hospital and 2498 (42%) died after discharge. Individuals with burn injury had a 1.4-fold greater mortality rate than those with no injury (95% confidence interval, CI: 1.3–1.5). In this cohort, the long-term mortality attributable to burn injury was 29%. Mortality risk was increased by both severe and minor burns, with adjusted mortality rate ratios of 1.3 (95% CI: 1.1–1.9) and 2.1 (95% CI: 1.9–2.3), respectively. Conclusion Burn injury is associated with increased long-term mortality. In our study population, sole reliance on data on in-hospital deaths would lead to an underestimate of the true mortality burden associated with burn injury. PMID:26240461

Optimizing Aircraft Trajectories with Multiple Cruise Altitudes in the Presence of Winds

NASA Technical Reports Server (NTRS)

Ng, Hok K.; Sridhar, Banavar; Grabbe, Shon

2014-01-01

This study develops a trajectory optimization algorithm for approximately minimizing aircraft travel time and fuel burn by combining a method for computing minimum-time routes in winds on multiple horizontal planes, and an aircraft fuel burn model for generating fuel-optimal vertical profiles. It is applied to assess the potential benefits of flying user-preferred routes for commercial cargo flights operating between Anchorage, Alaska and major airports in Asia and the contiguous United States. Flying wind optimal trajectories with a fuel-optimal vertical profile reduces average fuel burn of international flights cruising at a single altitude by 1-3 percent. The potential fuel savings of performing en-route step climbs are not significant for many shorter domestic cargo flights that have only one step climb. Wind-optimal trajectories reduce fuel burn and travel time relative to the flight plan route by up to 3 percent for the domestic cargo flights. However, for trans-oceanic traffic, the fuel burn savings could be as much as 10 percent. The actual savings in operations will vary from the simulation results due to differences in the aircraft models and user defined cost indices. In general, the savings are proportional to trip length, and depend on the en-route wind conditions and aircraft types.

The trends of burns epidemiology in a tropical regional burns centre.

PubMed

Hwee, Jolie; Song, Christopher; Tan, Kok Chai; Tan, Bien Keem; Chong, Si Jack

2016-05-01

Singapore General Hospital (SGH) is a regional burns centre in Southeast Asia and is the only dedicated burns facility providing specialized burns care in Singapore. A cohort study was performed for burns patients admitted to SGH from 2011 to 2013. We compared our data with earlier studies and observed the trends of burns epidemiology in Singapore. Results were analyzed using the SPSS programme. 655 patients were admitted during this study period, a 35.9% increase from 2003 to 2005. Scalding by water and flame injury remain the top causes of burns and the mean extent of burn is 9.5%. TBSA correlates with the incidence of burn infection, bacteremia and mortality. Patients with ≥20% TBSA are at a higher risk of bacteremia, and ≥ 34% TBSA is a predictor of mortality. 4.9% (n=32) of our patients developed bacteremia. Bacteremia was associated with a surgical duration of ≥80min. Patients with bacteremia incurred longer hospitalization, and had higher mortality rates. Overall mortality rate of our burns patients has decreased from 4.5% to 2.7% (n=18). Key factors of mortality include inhalational injury, bacteremia and ≥20% TBSA. This is a large epidemiology study of a tropical region burns centre. A total of 655 burns cases over a 3-year period were analyzed. We analysed the key factors associated with adverse outcomes including burns infection, bacteremia and mortality, factors associated with mortality, and discussed strategies on the optimization of burns care. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

An improved model for the combustion of AP composite propellants

NASA Technical Reports Server (NTRS)

Cohen, N. S.; Strand, L. D.

1981-01-01

This paper presents several improvements to the BDP model of steady-state burning of AP composite solid propellants. The Price-Boggs-Derr model of AP monopropellant burning is incorporated to represent the AP. A separate energy equation is written for the binder to permit a different surface temperature from the AP; this includes an analysis of the sharing of primary diffusion flame energy, and correction of a BDP model inconsistency in treating the binder regression rate. A method for assembling component contributions to calculate the burning rates of multimodal propellants is also presented. Results are shown in the form of representative burning rate curves, comparisons with data, and calculated internal details of interest. Ideas for future work are discussed in an Appendix.

The effect of a changed environment on bacterial colonization rates in an established burns centre

PubMed Central

Wormald, P. J.

1970-01-01

In an established burns centre which moved from an old building to new purpose-designed premises, colonization rates of patients' burns with Staphylococcus aureus, Pseudomonas aeruginosa and other Gram-negative bacilli were not reduced. Colonization rates with Streptococcus pyogenes increased but the increase was mainly due to multiple importations in the new premises of a strain of higher communicability than any seen in the old. In the first 32 months in the new environment 10 patients were found colonized with pseudomonas on admission and 20 became colonized in the unit. A much higher proportion of patients with burns of more than 30% body surface became colonized than of patients with less. About one-third of the above 20 patients became colonized with strains already isolated from another patient; all but one of them had small area burns. Cross-infection was not observed from numerous heavily colonized patients with high percentage burns. This paradox is discussed in detail. Basin outflows in the new premises became colonized with P. aeruginosa of two serotypes not found on patients in this unit. PMID:4993291

The effect of a changed environment on bacterial colonization rates in an established burns centre.

PubMed

Wormald, P J

1970-12-01

In an established burns centre which moved from an old building to new purpose-designed premises, colonization rates of patients' burns with Staphylococcus aureus, Pseudomonas aeruginosa and other Gram-negative bacilli were not reduced. Colonization rates with Streptococcus pyogenes increased but the increase was mainly due to multiple importations in the new premises of a strain of higher communicability than any seen in the old.In the first 32 months in the new environment 10 patients were found colonized with pseudomonas on admission and 20 became colonized in the unit. A much higher proportion of patients with burns of more than 30% body surface became colonized than of patients with less. About one-third of the above 20 patients became colonized with strains already isolated from another patient; all but one of them had small area burns. Cross-infection was not observed from numerous heavily colonized patients with high percentage burns. This paradox is discussed in detail. Basin outflows in the new premises became colonized with P. aeruginosa of two serotypes not found on patients in this unit.

Influence of early childhood burns on school performance: an Australian population study.

PubMed

Azzam, Nadin; Oei, Ju-Lee; Adams, Susan; Bajuk, Barbara; Hilder, Lisa; Mohamed, Abdel-Latif; Wright, Ian M R; Holland, Andrew J A

2018-05-01

To determine the influence of burn injuries on childhood performance in national standardised curriculum-based school tests. Birth and health records of 977 children who were hospitalised with a burn injury between 2000 and 2006 in the state of New South Wales, Australia, were linked to performance scores in the National Assessment Program: Literacy and Numeracy test, a compulsory nationwide curriculum-based test (CBT) and compared with children who were not hospitalised for burns and who were matched for birth year, gender, gestation and socioeconomic status. Test scores in years 3 (ages 8-9), 5 (ages 10-11) and 7 (ages 13-14) in numeracy, writing, reading, spelling, grammar and punctuation. Mean age at first burn injury was 28 months (median: 20, range: 0-140). Children with burns were significantly more likely to have younger mothers (28.5 vs 29.6 years) (P<0.001), be indigenous (OR 2.5 (95% CI 2.1 to 3.1)) (P<0.001) and have siblings (OR 1.2 (95% CI 1.1 to 1.4)) (P<0.001). They were also less likely to meet national minimum standards in most domains of testing until year 5, even after adjustment for parental education levels, parental smoking, maternal age and indigenous status. Each 10% increase in total body surface area burnt was associated with a decrease in year 5 scores by 37.0% in numeracy and 71.9% in writing. Most childhood burn injuries occur before the start of formal schooling. Children who are hospitalised for burns perform more poorly in CBT even after accounting for family and socioeconomic disadvantage. Rehabilitation of children with burn injuries must address school performance to decrease any long-term negative societal impact of burns. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Comparison of soil infiltration rates in burned and unburned mountainous watersheds

USGS Publications Warehouse

Martin, D.A.; Moody, J.A.

2001-01-01

Steady-state infiltration measurements were made at mountainous sites in New Mexico and Colorado, USA, with volcanic and granitic soils after wildfires and at comparable unburned sites. We measured infiltration in the New Mexico volcanic soils under two vegetation types, ponderosa pine and mixed conifer, and in the Colorado granitic soils under ponderosa pine vegetation. These measurements were made within high-severity burn areas using a portable infiltrometer with a 0.017 m2 infiltration area and artificial rainfall rates ranging from 97 to 440 mm h-1. Steady-state infiltration rates were less at all burned sites relative to unburned sites. The volcanic soil with ponderosa pine vegetation showed the greatest difference in infiltration rates with a ratio of steady-state infiltration rate in burned sites to unburned soils equal to 0.15. Volcanic soils with mixed conifer vegetation had a ratio (burned to unburned soils) of at most 0.38, and granitic soils with ponderosa pine vegetation had a ratio of 0.38. Steady-state infiltration rates on unburned volcanic and granitic soils with ponderosa pine vegetation are not statistically different. We present data on the particle-size distribution at all the study sites and examples of wetting patterns produced during the infiltration experiments. Published in 2001 by John Wiley and Sons, Ltd.

Thermal decomposition of high-nitrogen energetic compounds: TAGzT and GUzT

NASA Astrophysics Data System (ADS)

Hayden, Heather F.

The U.S. Navy is exploring high-nitrogen compounds as burning-rate additives to meet the growing demands of future high-performance gun systems. Two high-nitrogen compounds investigated as potential burning-rate additives are bis(triaminoguanidinium) 5,5-azobitetrazolate (TAGzT) and bis(guanidinium) 5,5'-azobitetrazolate (GUzT). Small-scale tests showed that formulations containing TAGzT exhibit significant increases in the burning rates of RDX-based gun propellants. However, when GUzT, a similarly structured molecule was incorporated into the formulation, there was essentially no effect on the burning rate of the propellant. Through the use of simultaneous thermogravimetric modulated beam mass spectrometry (STMBMS) and Fourier-Transform ion cyclotron resonance (FTICR) mass spectrometry methods, an investigation of the underlying chemical and physical processes that control the thermal decomposition behavior of TAGzT and GUzT alone and in the presence of RDX, was conducted. The objective was to determine why GUzT is not as good a burning-rate enhancer in RDX-based gun propellants as compared to TAGzT. The results show that TAGzT is an effective burning-rate modifier in the presence of RDX because the decomposition of TAGzT alters the initial stages of the decomposition of RDX. Hydrazine, formed in the decomposition of TAGzT, reacts faster with RDX than RDX can decompose itself. The reactions occur at temperatures below the melting point of RDX and thus the TAGzT decomposition products react with RDX in the gas phase. Although there is no hydrazine formed in the decomposition of GUzT, amines formed in the decomposition of GUzT react with aldehydes, formed in the decomposition of RDX, resulting in an increased reaction rate of RDX in the presence of GUzT. However, GUzT is not an effective burning-rate modifier because its decomposition does not alter the initial gas-phase decomposition of RDX. The decomposition of GUzT occurs at temperatures above the melting point of RDX. Therefore, the decomposition of GUzT affects reactions that are dominant in the liquid phase of RDX. Although GUzT is not an effective burning-rate modifier, features of its decomposition where the reaction between amines formed in the decomposition of GUzT react with the aldehydes, formed in the decomposition of RDX, may have implications from an insensitive-munitions perspective.

Clinical study of cultured epithelial autografts in liquid suspension in severe burn patients.

PubMed

Yim, Haejun; Yang, Hyeong Tae; Cho, Yong Suk; Seo, Cheong Hoon; Lee, Boung Chul; Ko, Jang Hyu; Kwak, In Suk; Kim, Dohern; Hur, Jun; Kim, Jong Hyun; Chun, Wook

2011-09-01

We address the clinical application of the suspension type cultured epithelial autografts (CEAs), Keraheal™ (MCTT, Seoul, Korea), along with the effects, application method, merits and demerits thereof. From February 2007 to June 2010, 29 burn patients with extensive burns, participated in the suspension type of CEA clinical test. A widely meshed autograft (1:4-6 ratio) was applied to the wound bed and the suspension type CEA was sprayed with a Tissomat cell sprayer, followed by a Tissucol spray, a fibrin sealant. The patients' (men/women=26/3) median (interquartile ranges) age was 42 (30-49) years old, the burned TBSA was 55 (44-60) %, and the full thickness burn area was 40 (30-46.5) %. The area of Keraheal™ applied was 800 (400-1200) cm(2). The take rate was 96 (90.5-99) % and 100 (98.5-100) % at 2 and 4 weeks after treatment with Keraheal™, respectively. The Vancouver burn scar scale was 5 (4-6.5), 4 (3-6), and 3 (2-4) at 8, 12 and 24 weeks after the Keraheal™ application. Widely meshed autograft must be applied in massive burns but it's take rate is greatly reduced. The CEAs enhance the take rate of a wide meshed autograft in massive burns and allow for grafting wide meshed autograft together with acellular dermal matrix in some cases. Copyright © 2011 Elsevier Ltd and ISBI. All rights reserved.

Effects of fire on golden eagle territory occupancy and reproductive success

USGS Publications Warehouse

Kochert, Michael N.; Steenhof, Karen; Marzluff, J.M.; Carpenter, L.B.

1999-01-01

We examined effects of fire on golden eagle (Aquila chrysaetos) territory occupancy and reproductive success in southwestern Idaho because wildfires since 1980 have resulted in large-scale losses of shrub habitat in the Snake River Plain. Success (percentage of pairs that raised young) at burned territories declined after major fires (P = 0.004). Pairs in burned areas that could expand into adjacent vacant territories were as successful as pairs in unburned territories and more successful than pairs in burned territories that could not expand. Success at extensively burned territories was lowest 4-6 years after burning but increased 4-5 years later. The incidence and extent of fires did not help predict territories that would have low occupancy and success rates in postburn years. The presence of a vacant neighboring territory and the amount of agriculture and proportion of shrubs within 3 km of the nesting centroid best predicted probability of territory occupancy. Nesting success during preburn years best predicted the probability of a territory being successful in postburn years. Burned territories with high success rates during preburn years continued to have high success rates during postburn years, and those with low success in preburn years continued to be less successful after burning. In areas where much shrub habitat has been lost to fire, management for golden eagles should include active fire suppression and rehabilitation of burned areas.

[Analysis of the pathogenic characteristics of 162 severely burned patients with bloodstream infection].

PubMed

Gong, Y L; Yang, Z C; Yin, S P; Liu, M X; Zhang, C; Luo, X Q; Peng, Y Z

2016-09-20

To analyze the distribution and drug resistance of pathogen isolated from severely burned patients with bloodstream infection, so as to provide reference for the clinical treatment of these patients. Blood samples of 162 severely burned patients (including 120 patients with extremely severe burn) with bloodstream infection admitted into our burn ICU from January 2011 to December 2014 were collected. Pathogens were cultured by fully automatic blood culture system, and API bacteria identification panels were used to identify pathogen. Kirby-Bauer paper disk diffusion method was used to detect the drug resistance of major Gram-negative and -positive bacteria to 37 antibiotics including ampicillin, piperacillin and teicoplanin, etc. (resistance to vancomycin was detected by E test), and drug resistance of fungi to 5 antibiotics including voriconazole and amphotericin B, etc. Modified Hodge test was used to further identify imipenem and meropenem resistant Klebsiella pneumonia. D test was used to detect erythromycin-induced clindamycin resistant Staphylococcus aureus. The pathogen distribution and drug resistance rate were analyzed by WHONET 5.5. Mortality rate and infected pathogens of patients with extremely severe burn and patients with non-extremely severe burn were recorded. Data were processed with Wilcoxon rank sum test. (1) Totally 1 658 blood samples were collected during the four years, and 339 (20.4%) strains of pathogens were isolated. The isolation rate of Gram-negative bacteria, Gram-positive bacteria, and fungi were 68.4% (232/339), 24.5% (83/339), and 7.1% (24/339), respectively. The top three pathogens with isolation rate from high to low were Acinetobacter baumannii, Staphylococcus aureus, and Pseudomonas aeruginosa in turn. (2) Except for the low drug resistance rate to polymyxin B and minocycline, drug resistance rate of Acinetobacter baumannii to the other antibiotics were relatively high (81.0%-100.0%). Pseudomonas aeruginosa was sensitive to polymyxin B but highly resistant to other antibiotics (57.7%-100.0%). Enterobacter cloacae was sensitive to imipenem and meropenem, while its drug resistance rates to ciprofloxacin, levofloxacin, cefoperazone/sulbactam, cefepime, piperacillin/tazobactam were 25.0%-49.0%, and those to the other antibiotics were 66.7%-100.0%. Drug resistance rates of Klebsiella pneumoniae to cefoperazone/sulbactam, imipenem, and meropenem were low (5.9%-15.6%, two imipenem- and meropenem-resistant strains were identified by modified Hodge test), while its drug resistance rates to amoxicillin/clavulanic acid, piperacillin/tazobactam, cefepime, cefoxitin, amikacin, levofloxacin were 35.3%-47.1%, and those to the other antibiotics were 50.0%-100.0%. (3) Drug resistance rates of methicillin-resistant Staphylococcus aureus (MRSA) to most of the antibiotics were higher than those of the methicillin-sensitive Staphylococcus aureus (MSSA). MRSA was sensitive to linezolid, vancomycin, and teicoplanin, while its drug resistance rates to compound sulfamethoxazole, clindamycin, minocycline, and erythromycin were 5.3%-31.6%, and those to the other antibiotics were 81.6%-100.0%. Except for totally resistant to penicillin G and tetracycline, MSSA was sensitive to the other antibiotics. Fourteen Staphylococcus aureus strains were resistant to erythromycin-induced clindamycin. Enterococcus was sensitive to vancomycin and teicoplanin, while its drug resistance rates to linezolid, chloramphenicol, nitrofurantoin, and high unit gentamicin were low (10.0%-30.0%), and those to ciprofloxacin, erythromycin, minocycline, and ampicillin were high (60.0%-80.0%). Enterococcus was fully resistant to rifampicin. (4) Fungi was sensitive to amphotericin B, and drug resistance rates of fungi to voriconazole, fluconazole, itraconazole, and ketoconazole were 7.2%-12.5%. (5) The mortality of patients with extremely severe burn was higher than that of patients with non-extremely severe burn. The variety of infected pathogens in patients with extremely severe burn significantly outnumbered that in patients with non-extremely severe burn (Z=-2.985, P=0.005). The variety of pathogen in severely burned patients with bloodstream infection is wide, with the main pathogens as Acinetobacter baumannii, Staphylococcus aureus, and Pseudomonas aeruginosa, and the drug resistance situation is grim. The types of infected pathogen in patients with extremely severe burn are more complex, and the mortality of these patients is higher when compared with that of patients with non-extremely severe burn.

β -decay rate of 59Fe in shell burning environment and its influence on the production of 60Fe in a massive star

NASA Astrophysics Data System (ADS)

Li, K. A.; Lam, Y. H.; Qi, C.; Tang, X. D.; Zhang, N. T.

2016-12-01

We deduced the stellar β -decay rate of 59Fe at typical carbon-shell burning temperature by taking the experimental Gamow-Teller transition strengths of the 59Fe excited states. The result is also compared with those derived from large-scale shell model calculations. The new rate is up to a factor of 2.5 lower than the theoretical rate of Fuller, Fowler, and Newman (FFN) and up to a factor of 5 higher than decay rate of Langanke and Martínez-Pinedo (LMP) in the temperature region 0.5 ≤T ≤2 GK. We estimated the impact of the newly determined rate on the synthesis of cosmic γ emitter 60Fe in C-shell burning and explosive C/Ne burning using a one-zone model calculation. Our results show that 59Fe stellar β decay plays an important role in 60Fe nucleosynthesis, even though the uncertainty of the decay rate is rather large due to the error of B (GT) strengths.

Flammability testing conducted in support of Apollo 13

NASA Technical Reports Server (NTRS)

Leger, L. J.; Bricker, R. W.

1971-01-01

In support of the Apollo 13 investigation of the oxygen tank failure, flame propagation rates were determined for Teflon insulation in cryogenic and ambient temperature oxygen for upward, downward, and zero g burns. The propagation rates depended heavily on configuration and varied from 4.8 to 10.9 cm/sec for upward one g burns to 0.48 cm/sec for zero g burns. In addition to the flame propagation rates, tests were conducted to determine if Teflon burning in cryogenic oxygen could ignite metals (promoted ignition) with which it came in contact. Tests conducted on various metal alloys used in the oxygen tank indicated that most of the alloys could be ignited by burning Teflon in certain configurations. After the propagation rates and promoted metal ignitions had been evaluated, a test was conducted on a quantity gauge and wire harness used in the oxygen tank to determine if flame propagation to the tank wall was possible. Propagation of the wire bundle after ignition resulted in a catastrophic failure of the test vessel in the area of the quantity gauge.

The effect of density and thermal diffusivity of wood on the rate of burning of wood cribs

Treesearch

H.D. Bruce; W.Y. Pong; W.L. Fons

1961-01-01

A program of research on free-burning wood fires is being conducted by the Forest Service to build up experimental data on the properties of such fires, with the iltimate objective of describing the physical phenomena in terms of fundamental laws. Density was the first wood property investigated. This report gives data on the rate of burning of cribs of five species...

40 CFR 63.1564 - What are my requirements for metal HAP emissions from catalytic cracking units?

Code of Federal Regulations, 2013 CFR

2013-07-01

... coke burn-off emission limit (Option 4). (2) Comply with each operating limit in Table 2 of this... the PM emission rate (lb/1,000 lbs of coke burn-off) for each run using Equations 1, 2, and 3 (if applicable) of this section as follows: ER11AP02.000 Where: Rc = Coke burn-off rate, kg/hr (lb/hr); Qr...

40 CFR 63.1564 - What are my requirements for metal HAP emissions from catalytic cracking units?

Code of Federal Regulations, 2014 CFR

2014-07-01

... coke burn-off emission limit (Option 4). (2) Comply with each operating limit in Table 2 of this... the PM emission rate (lb/1,000 lbs of coke burn-off) for each run using Equations 1, 2, and 3 (if applicable) of this section as follows: ER11AP02.000 Where: Rc = Coke burn-off rate, kg/hr (lb/hr); Qr...

40 CFR 63.1564 - What are my requirements for metal HAP emissions from catalytic cracking units?

Code of Federal Regulations, 2012 CFR

2012-07-01

... coke burn-off emission limit (Option 4). (2) Comply with each operating limit in Table 2 of this... the PM emission rate (lb/1,000 lbs of coke burn-off) for each run using Equations 1, 2, and 3 (if applicable) of this section as follows: ER11AP02.000 Where: Rc = Coke burn-off rate, kg/hr (lb/hr); Qr...

Scheduling prescribed burns for hazard reduction in the southeast

Treesearch

Stephen S. Sackett

1975-01-01

Twelve-year studies in the southeastern Coastal Plain revealed that pine stands should be burned every three years to reduce natural fuels and thus forestall damage from possible wildfires. Rates of overstory growth were not significantly different in burned and unburned stands. Guidelines for prescribed burning of pine stands in this region are presented.

Investigation of critical burning of fuel droplets

NASA Technical Reports Server (NTRS)

Allison, C. B.; Canada, G. S.

1972-01-01

Fuel droplets were simulated by porous spheres having diameters in the range 0.63 to 1.9 cm and combustion tests were conducted at pressures up to 78 atm in a quiescent cold air environment. Measurements were made of the burning rate and liquid surface temperature during steady combustion. A high pressure flat flame burner apparatus is under development in order to allow testing of high pressure droplet burning in a combustion gas environment. Work was continued on the high pressure strand combustion characteristics of liquid fuels, with the major emphasis on hydrazine. Data was obtained on the burning rate and liquid surface temperatures at pressures in the range 7 to 500 psia. The response of a burning liquid monopropellant to imposed pressure oscillations is being investigated.

Burn Wound Healing and Treatment: Review and Advancements

DTIC Science & Technology

2015-06-12

different days post burn. Burns. 2009;35:36–45. 176. Ogden CL, Carroll MD, Kit BK, Flegal KM. Prevalence of childhood and adult obesity in the United...invasive imaging modalities into the routine treatment of burn wounds. Obese patients As the obese population continues to grow [176], new treatment...approaches will be required. Obese burn pa- tients present with a variety of unique characteristics that include: increased rates of diabetes

Dementia: A risk factor for burns in the elderly.

PubMed

Harvey, Lara; Mitchell, Rebecca; Brodaty, Henry; Draper, Brian; Close, Jacqueline

2016-03-01

Older people are disproportionately at risk of burn and have a high risk of dementia; however the impact of dementia on risk of burn is unknown. Linked hospitalisation and death records for individuals aged 65 years and older admitted to a NSW hospital for a burn over the ten year period 2003-2012 were analysed. Demographic and burn characteristics and health outcomes were compared for people with and without dementia. Incidence rates were calculated per 100,000 population and negative binomial regression was used to examine temporal trends. Of the 1535 older people hospitalised for a burn, 11.0% had a record of dementia. The age-standardised incidence rate for people with dementia was 22.7 per 100,000, and for people without dementia was 14.2 per 100,000 population, an incident rate ratio (IRR) of 1.6 (95%CI 1.3-2.0, p<0.0001). There was no significant change in rates over time. People with dementia were more likely to be admitted with burns to the trunk and have greater than 20% total body surface area (TBSA) burn. Mean length of stay (LOS) was more than double (24 vs 12 days) and 30-day mortality three times higher (15.4% vs 5.1%) for people with dementia. Adjusting for differences in age, sex, TBSA, inhalation injury, comorbidities and complications eliminated the increased mortality but not the difference in LOS. People with dementia were more likely to have been burnt by hot tap water (RR 2.3; 95%CI 1.8-2.8, p<0.0001) and ignition of clothing/nightwear (RR 2.6; 95% CI 1.2-5.4, p=0.0149) and to have sustained the burn in residential aged care (20.0%). Burns in people with dementia are significant injuries, which have not decreased over the past ten years despite prevention efforts to reduce burns in older people. Targeted prevention education in the home and residential aged care facilities is warranted. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Epidemiology of Burns in Rural Bangladesh: An Update.

PubMed

He, Siran; Alonge, Olakunle; Agrawal, Priyanka; Sharmin, Shumona; Islam, Irteja; Mashreky, Saidur Rahman; Arifeen, Shams El

2017-04-05

Each year, approximately 265,000 deaths occur due to burns on a global scale. In Bangladesh, around 173,000 children under 18 sustain a burn injury. Since most epidemiological studies on burn injuries in low and middle-income countries are based on small-scale surveys or hospital records, this study aims to derive burn mortality and morbidity measures and risk factors at a population level in Bangladesh. A household survey was conducted in seven rural sub-districts of Bangladesh in 2013 to assess injury outcomes. Burn injuries were one of the external causes of injury. Epidemiological characteristics and risk factors were described using descriptive as well as univariate and multivariate logistic regression analyses. The overall mortality and morbidity rates were 2 deaths and 528 injuries per 100,000 populations. Females had a higher burn rate. More than 50% of injuries were seen in adults 25 to 64 years of age. Most injuries occurred in the kitchen while preparing food. 88% of all burns occurred due to flame. Children 1 to 4 years of age were four times more likely to sustain burn injuries as compared to infants. Age-targeted interventions, awareness of first aid protocols, and improvement of acute care management would be potential leads to curb death and disability due to burn injuries.

Suicide by burning: epidemiological and clinical profiles.

PubMed

Theodorou, Panagiotis; Phan, Vu T Q; Weinand, Christian; Maegele, Marc; Maurer, Christoph A; Perbix, Walter; Leitsch, Sebastian; Lefering, Rolf; Spilker, Gerald

2011-04-01

Self-immolation constitutes a rare form of suicide in developed countries, though it accounts for unique injury characteristics in the burn intensive care unit. The aim of this study was to present the epidemiological and clinical features of patients burned during a suicidal attempt seen in a North Rhine-Westphalia burn intensive care unit (BICU). To address this aim, we undertook a 21-year retrospective study involving patients with thermal injuries admitted to the largest burn unit in Germany. A total of 125 suicide-related burn victims were identified in the study period (9.4%). Comparing the self-immolation group with the rest burn patient cohort, suicide victims were more likely to be single and to act under the influence of alcohol. The suicidal group had a larger extent of burns, higher incidence of inhalation injury, required more surgical procedures, catecholamines, blood transfusions, and a longer BICU stay. Their clinical course was complicated by prolonged intubation period, higher rate of multiple drug-resistant bacteria acquisition and sepsis, leading to a higher mortality rate. Although the proportion of self-immolation victims among all burned patients is not high, the markedly higher severity of their burns and their poorer quality of outcomes makes them an important clinical subgroup for further study.

Epidemiology of Burns in Rural Bangladesh: An Update

PubMed Central

He, Siran; Alonge, Olakunle; Agrawal, Priyanka; Sharmin, Shumona; Islam, Irteja; Mashreky, Saidur Rahman; Arifeen, Shams El

2017-01-01

Each year, approximately 265,000 deaths occur due to burns on a global scale. In Bangladesh, around 173,000 children under 18 sustain a burn injury. Since most epidemiological studies on burn injuries in low and middle-income countries are based on small-scale surveys or hospital records, this study aims to derive burn mortality and morbidity measures and risk factors at a population level in Bangladesh. A household survey was conducted in seven rural sub-districts of Bangladesh in 2013 to assess injury outcomes. Burn injuries were one of the external causes of injury. Epidemiological characteristics and risk factors were described using descriptive as well as univariate and multivariate logistic regression analyses. The overall mortality and morbidity rates were 2 deaths and 528 injuries per 100,000 populations. Females had a higher burn rate. More than 50% of injuries were seen in adults 25 to 64 years of age. Most injuries occurred in the kitchen while preparing food. 88% of all burns occurred due to flame. Children 1 to 4 years of age were four times more likely to sustain burn injuries as compared to infants. Age-targeted interventions, awareness of first aid protocols, and improvement of acute care management would be potential leads to curb death and disability due to burn injuries. PMID:28379160

An educational board game for learning and teaching burn care: A preliminary evaluation.

PubMed

Whittam, Alexander M; Chow, Whitney

2017-01-01

Timely and effective assessment, resuscitation and transfer of patients with severe burns has been demonstrated to improve outcome. A dedicated one-day course exists to equip all frontline emergency healthcare workers with the necessary knowledge and skills to manage severe burn injuries. More recently, a board game has been developed which aims to act as a learning and practice development tool for those managing burn injuries. We present the findings of our preliminary evaluation of this game. We played this game with a multidisciplinary group of staff including doctors, nurses and therapists. A proportion of these participants had previously completed the Emergency Management of Severe Burns (EMSB) course. We obtained subjective results from a questionnaire, using both Likert-type ratings and open-ended questions. The styling of the game and ease of instructions was rated from 'average' to 'excellent'. The relevance of questions was rated from 'good' to 'excellent'. The usefulness of the game to increase knowledge and stimulate discussion was rated between 'good' and 'excellent'. All participants stated that they would recommend the game to other healthcare professionals. This is the only burns and plastic surgery-related educational game in the literature. Educational games adhere to principles of adult learning but there is insufficient evidence in the literature to either confirm or refute their utility. Our preliminary evaluation of this game has shown that it achieves its main aims, namely to increase knowledge in burn care and to stimulate discussion. Further work is required to assess the board game.

A clinician's guide to the treatment of foot burns occurring in diabetic patients.

PubMed

Jones, Larry M; Coffey, Rebecca; Khandelwal, Sorabh; Atway, Said; Gordillo, Gayle; Murphy, Claire; Fries, Jody A; Dungan, Kathleen

2014-12-01

Diabetes mellitus affects 25.8 million Americans and is predicted to almost double by 2050. The presence of diabetes complicates hospital courses because of the microvascular complications associated with disease progression. Patients with diabetes represent 18.3% of annual burn admissions to our unit and 27% have burns to the feet. The purpose of this project was to develop an evidence-based guideline for care of the patient with diabetes and foot burns A multidisciplinary group was charged with developing an evidence-based guideline for the treatment of foot burns in patients with diabetes. Evidence was evaluated in the areas of diabetes, burn care, hyperbaric medicine, care of diabetic foot wounds and physical therapy. After guideline development and approval, key aspects were incorporated into order sets. Key aspects of this guideline are the ability to identify patients with undiagnosed diabetes, assess diabetic control, optimize glycemic and metabolic control, optimize burn wound management, treat microvascular disease, and provide education and a discharge plan. Evaluated outcomes are glycemic control, length of stay, complication rates, amputation rates, infection rates and the use of hyperbaric oxygen. Best outcomes for this high risk population will be attainable with an evidence based guideline. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

The Impact of a Universal Decolonization Protocol on Hospital-Acquired Methicillin-Resistant Staphylococcus aureus in a Burn Population.

PubMed

Johnson, Arthur T; Nygaard, Rachel M; Cohen, Ellie M; Fey, Ryan M; Wagner, Anne Lambert

Hospital-acquired (HA) methicillin-resistant Staphylococcus aureus (MRSA) is a leading cause of HA infections and a significant concern for burn centers. The use of 2% chlorhexidine-impregnated wipes and nasal mupirocin significantly decreases the rate of HA-MRSA in adult intensive care units. The aim of this study was to examine the impact of universal decolonization on the rate of MRSA conversion in an American Burn Association verified adult and pediatric burn center. Universal decolonization protocol consisting of daily chlorhexidine baths and a 5-day course of nasal mupirocin was implemented in the burn unit. MRSA screening both on admission and weekly and contact isolation practices were in place in pre-decolonization and post-decolonization periods. Patient data were analyzed 2 years before and 1 year after implementation of the protocol. The incidence rate of MRSA was significantly decreased after the implementation of the decolonization protocol (11.8 vs 1.0 per 1000 patient days, P < .001). Secondary to the loss of the skin barrier and suppressed immune systems, burn patients are at greater risk for invasive infection leading to severe complications and death. The prevalence of HA-MRSA at our institution's burn center was significantly decreased after the implementation of a universal decolonization protocol.

Optimizing conceptual aircraft designs for minimum life cycle cost

NASA Technical Reports Server (NTRS)

Johnson, Vicki S.

1989-01-01

A life cycle cost (LCC) module has been added to the FLight Optimization System (FLOPS), allowing the additional optimization variables of life cycle cost, direct operating cost, and acquisition cost. Extensive use of the methodology on short-, medium-, and medium-to-long range aircraft has demonstrated that the system works well. Results from the study show that optimization parameter has a definite effect on the aircraft, and that optimizing an aircraft for minimum LCC results in a different airplane than when optimizing for minimum take-off gross weight (TOGW), fuel burned, direct operation cost (DOC), or acquisition cost. Additionally, the economic assumptions can have a strong impact on the configurations optimized for minimum LCC or DOC. Also, results show that advanced technology can be worthwhile, even if it results in higher manufacturing and operating costs. Examining the number of engines a configuration should have demonstrated a real payoff of including life cycle cost in the conceptual design process: the minimum TOGW of fuel aircraft did not always have the lowest life cycle cost when considering the number of engines.

The Burn Rate of Calcium Sulfate Dihydrate-Aluminum Thermites.

PubMed

Govender, Desania Raquel; Focke, Walter Wilhelm; Tichapondwa, Shepherd Masimba; Cloete, William Edward

2018-05-29

The energetics of cast calcium sulfate dihydrate-aluminium thermites was investigated. The casts were prepared form water slurries with a solids content of xxx wt-%. The base case thermite comprised 60 wt-% calcium sulfate dihydrate as the oxidiser with 40 wt-% aluminium as fuel. The heat of hydration of the base case was 59 ± 8 kJkg-1 and the setting time was zzz min. The compressive strength reached 2.9 ± 0.2 MPa after three days drying in ambient air. The open air burn rate was 12.0 ± 1.6 mm s-1 and a maximum surface temperature of 1370 ± 64 °C was recorded with a pyrometer. Bomb calorimetry indicated an energy output of 8.0 ± 1.1 MJ kg-1, slightly lower than predicted by the EKVI thermodynamic simulation. Substitution of 10 wt-% of the oxidant with copper sulfate pentahydrate significantly decreased the setting time of the casts to about yyy min. The density of the castings was varied by either adding hollow sodium borosilicate glass spheres or by adding excess water during the casting process. The addition of the hollow glass spheres caused a decrease in the burning rate. The burning rate of the base case was not affected materially by the addition of excess water. However, it did increase the burning rate of the copper sulfate pentahydrate-modified thermite. Dehydration of the casts by thermal treatments at either 155 °C or 200 °C also led to significant increases in the burning rate.

Solid Fuel Burning in Steady, Strained, Premixed Flow Fields: The Graphite/Air/Methane System

NASA Technical Reports Server (NTRS)

Egolfopoulos, Fokion N.; Wu, Ming-Shin (Technical Monitor)

2000-01-01

A detailed numerical investigation was conducted on the simultaneous burning of laminar premixed CH4/air flames and solid graphite in a stagnation flow configuration. The graphite and methane were chosen for this model, given that they are practical fuels and their chemical kinetics are considered as the most reliable ones among solid and hydrocarbon fuels, respectively. The simulation was performed by solving the quasi-one-dimensional equations of mass, momentum, energy, and species. The GRI 2.1 scheme was used for the gas-phase kinetics, while the heterogeneous kinetics were described by a six-step mechanism including stable and radical species. The effects of the graphite surface temperature, the gas-phase equivalence ratio, and the aerodynamic strain rate on the graphite burning rate and NO, production and destruction mechanisms were assessed. Results indicate that as the graphite temperature increases, its burning rate as well as the NO, concentration increase. Furthermore, it was found that by increasing the strain rate, the graphite burning rate increases as a result of the augmented supply of the gas-phase reactants towards the surface, while the NO, concentration decreases as a result of the reduced residence time. The effect of the equivalence ratio on both the graphite burning rate and NO, concentration was found to be non-monotonic and strongly dependent on the graphite temperature. Comparisons between results obtained for a graphite and a chemically inert surface revealed that the chemical activity of the graphite surface can result to the reduction of NO through reactions of the CH3, CH2, CH, and N radicals with NO.

Incidence and cost of non-fatal burns in Iran: a nationwide population-based study.

PubMed

Abouie, Abolfazl; Salamati, Payman; Hafezi-Nejad, Nima; Rahimi-Movaghar, Afarin; Saadat, Soheil; Amin-Esmaeili, Masoumeh; Sharifi, Vandad; Hajebi, Ahmad; Rahimi-Movaghar, Vafa

2018-03-01

To determine the incidence and cost of non-fatal burns in Iran; this cross-sectional household survey of a nationally representative sample of 15-64 years old was conducted. Through face-to-face interviews and telephone calls, the data on the demographics, history and cost of burns were collected. The annual incidence rate of burns was estimated 129.85 per 1000 population. Burns occurred higher in younger age, female gender and urban residency. The most common burn description was as follows: unpaid work (activity during burn), home (place of burn), heat and hot substances (mechanism of burn) and upper limb (site of burn). The average total cost of burn includes victims seeking medical care was US$124 per case. The main findings of this study suggest that burns are a major public health concern in Iran. To stop this important health issue, a national program for burn prevention and education must be developed.

Influence of fire on black-tailed prairie dog colony expansion in shortgrass steppe

USGS Publications Warehouse

Augustine, D.J.; Cully, J.F.; Johnson, T.L.

2007-01-01

Factors influencing the distribution and abundance of black-tailed prairie dog (Cynomys ludovicianus) colonies are of interest to rangeland managers because of the significant influence prairie dogs can exert on both livestock and biodiversity. We examined the influence of 4 prescribed burns and one wildfire on the rate and direction of prairie dog colony expansion in shortgrass steppe of southeastern Colorado. Our study was conducted during 2 years with below-average precipitation, when prairie dog colonies were expanding throughout the study area. Under these dry conditions, the rate of black-tailed prairie dog colony expansion into burned grassland (X?? = 2.6 ha??100-m perimeter-1??y-1; range = 0.8-5.9 ha??100-m perimeter-1??y-1; N = 5 colonies) was marginally greater than the expansion rate into unburned grassland (X?? =1.3 ha??100-m perimeter-1??y-1; range = 0.2-4.9 ha??100-m perimeter-1??y-1; N = 23 colonies; P = 0.066). For 3 colonies that were burned on only a portion of their perimeter, we documented consistently high rates of expansion into the adjacent burned grassland (38%-42% of available burned habitat colonized) but variable expansion rates into the adjacent unburned grassland (2%-39% of available unburned habitat colonized). While our results provide evidence that burning can increase colony expansion rate even under conditions of low vegetative structure, this effect was minor at the scale of the overall colony complex because some unburned colonies were also able to expand at high rates. This result highlights the need to evaluate effects of fire on colony expansion during above-average rainfall years, when expansion into unburned grassland may be considerably lower.

Modelling Carbon Emissions in Calluna vulgaris-Dominated Ecosystems when Prescribed Burning and Wildfires Interact.

PubMed

Santana, Victor M; Alday, Josu G; Lee, HyoHyeMi; Allen, Katherine A; Marrs, Rob H

2016-01-01

A present challenge in fire ecology is to optimize management techniques so that ecological services are maximized and C emissions minimized. Here, we modeled the effects of different prescribed-burning rotation intervals and wildfires on carbon emissions (present and future) in British moorlands. Biomass-accumulation curves from four Calluna-dominated ecosystems along a north-south gradient in Great Britain were calculated and used within a matrix-model based on Markov Chains to calculate above-ground biomass-loads and annual C emissions under different prescribed-burning rotation intervals. Additionally, we assessed the interaction of these parameters with a decreasing wildfire return intervals. We observed that litter accumulation patterns varied between sites. Northern sites (colder and wetter) accumulated lower amounts of litter with time than southern sites (hotter and drier). The accumulation patterns of the living vegetation dominated by Calluna were determined by site-specific conditions. The optimal prescribed-burning rotation interval for minimizing annual carbon emissions also differed between sites: the optimal rotation interval for northern sites was between 30 and 50 years, whereas for southern sites a hump-backed relationship was found with the optimal interval either between 8 to 10 years or between 30 to 50 years. Increasing wildfire frequency interacted with prescribed-burning rotation intervals by both increasing C emissions and modifying the optimum prescribed-burning interval for minimum C emission. This highlights the importance of studying site-specific biomass accumulation patterns with respect to environmental conditions for identifying suitable fire-rotation intervals to minimize C emissions.

Virtual reality pain control during burn wound debridement of combat-related burn injuries using robot-like arm mounted VR goggles.

PubMed

Maani, Christopher V; Hoffman, Hunter G; Morrow, Michelle; Maiers, Alan; Gaylord, Kathryn; McGhee, Laura L; DeSocio, Peter A

2011-07-01

This is the first controlled study to explore whether adjunctive immersive virtual reality (VR) can reduce excessive pain of soldiers with combat-related burn injuries during wound debridement. Patients were US soldiers burned in combat attacks involving explosive devices in Iraq or Afghanistan. During the same wound care session using a within-subject experimental design, 12 patients received half of their severe burn wound cleaning procedure (~6 minutes) with standard of care pharmacologies and half while in VR (treatment order randomized). Three 0 to 10 Graphic Rating Scale pain scores for each of the treatment conditions served as the primary variables. Patients reported significantly less pain when distracted with VR. "Worst pain" (pain intensity) dropped from 6.25 of 10 to 4.50 of 10. "Pain unpleasantness" ratings dropped from "moderate" (6.25 of 10) to "mild" (2.83 of 10). "Time spent thinking about pain" dropped from 76% during no VR to 22% during VR. Patients rated "no VR" as "no fun at all" (<1 of 10) and rated VR as "pretty fun" (7.5 of 10). Follow-up analyses showed VR was especially effective for the six patients who scored 7 of 10 or higher (severe to excruciating) on the "worst pain" (pain intensity) ratings. These preliminary results provide the first evidence from a controlled study that adjunctive immersive VR reduced pain of patients with combat-related burn injuries during severe burn wound debridement. Pain reduction during VR was greatest in patients with the highest pain during no VR. These patients were the first to use a unique custom robot-like arm mounted VR goggle system.

Virtual Reality Pain Control During Burn Wound Debridement of Combat-Related Burn Injuries Using Robot-Like Arm Mounted VR Goggles

PubMed Central

Maani, Christopher V.; Hoffman, Hunter G.; Morrow, Michelle; Maiers, Alan; Gaylord, Kathryn; McGhee, Laura L.; DeSocio, Peter A.

2015-01-01

Background This is the first controlled study to explore whether adjunctive immersive virtual reality (VR) can reduce excessive pain of soldiers with combat-related burn injuries during wound debridement. Methods Patients were US soldiers burned in combat attacks involving explosive devices in Iraq or Afghanistan. During the same wound care session using a within-subject experimental design, 12 patients received half of their severe burn wound cleaning procedure (∼6 minutes) with standard of care pharmacologies and half while in VR (treatment order randomized). Three 0 to 10 Graphic Rating Scale pain scores for each of the treatment conditions served as the primary variables. Results Patients reported significantly less pain when distracted with VR. “Worst pain” (pain intensity) dropped from 6.25 of 10 to 4.50 of 10. “Pain unpleasantness” ratings dropped from “moderate” (6.25 of 10) to “mild” (2.83 of 10). “Time spent thinking about pain” dropped from 76% during no VR to 22% during VR. Patients rated “no VR” as “no fun at all” (<1 of 10) and rated VR as “pretty fun” (7.5 of 10). Follow-up analyses showed VR was especially effective for the six patients who scored 7 of 10 or higher (severe to excruciating) on the “worst pain” (pain intensity) ratings. Conclusions These preliminary results provide the first evidence from a controlled study that adjunctive immersive VR reduced pain of patients with combat-related burn injuries during severe burn wound debridement. Pain reduction during VR was greatest in patients with the highest pain during no VR. These patients were the first to use a unique custom robot-like arm mounted VR goggle system. PMID:21795888

Basic Burns Management E-Learning: A New Teaching Tool.

PubMed

Egro, Francesco M

Burns teaching is organized only in a few medical schools in the United Kingdom. An e-learning tutorial was developed with the objective of incorporating burns teaching within the medical school curriculum. A 33-webpage e-learning was created, covering topics such as local and general response to burns, assessment of burns, first aid, primary and secondary survey, and referral guidelines. Medical student satisfaction was then evaluated using a 12-question feedback survey rated based on a Likert scale from 1 (very poor) to 5 (very good). The 12-question survey was completed by a total of 18 medical students ranging from second to fourth years (second = 17%, third = 22%, fourth = 61%). While only a couple of students had received prior burns teaching, 50% of the cohort had an interest to pursue surgery as a career. The majority of students (72%) would be interested to have an e-learning module on basic burns management in their medical curriculum. The means of all domains specific to the e-learning were rated as "good" or "very good." Students' rating for ease of use was 87%, usefulness was 88%, relevance to the medical curriculum was 90%, clarity and quality of content were 78% and 83%, respectively, design was 79%, and the overall satisfaction with this e-learning was 87%. The "Basic Burns Management" e-learning tutorial can provide an efficient and effective means of information delivery to medical students and junior doctors, allowing easy and fast incorporation of burns teaching within the medical curriculum and in other medical teaching settings.

Epidemiology of a decade of Pediatric fatal burns in Colombia, South America.

PubMed

Aldana, Maria Cristina del Rosario; Navarrete, Norberto

2015-11-01

Burns represent a serious problem around the world especially in low- and middle-income countries. The aim was to determine the epidemiological characteristics, causes and mortality rate of burn deaths in the Colombian pediatric population as well as to guide future education and prevention programs. We conducted an observational, analytical, retrospective population-based study. It was based upon official death certificate data using diagnosis codes for burns (scalds, thermal, electrical, intentional self-harm and not specified), that occurred between January 1, 2000 and December 31, 2009. Official death certificates of the pediatric population of up to 15 years of age were obtained from the National Administrative Department of Statistics. A total of 1197 fatal pediatric injuries related to burns were identified. The crude and adjusted mortality rate for burns in the pediatric population in Colombia during the length of the study was 0.899 and 0.912 per 100,000, respectively. The mortality rate tended to decrease (-5.17% annual) during the duration of the study. Children under 5 years of age were the most affected group (59.5%). Almost half of them died before arriving at a health facility (47.1%). Fire is the principal cause of death attributable to burns in Colombia, followed by electric burns and hot liquids. This is a first step study in researching the epidemiological features of pediatric deaths after burns. The Public Health's strategies should be oriented toward community awareness about these kind of injuries, and to teach children and families about risk factors and first aid. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Pediatric burns: Kids' Inpatient Database vs the National Burn Repository.

PubMed

Soleimani, Tahereh; Evans, Tyler A; Sood, Rajiv; Hartman, Brett C; Hadad, Ivan; Tholpady, Sunil S

2016-04-01

Burn injuries are one of the leading causes of morbidity and mortality in young children. The Kids' Inpatient Database (KID) and National Burn Repository (NBR) are two large national databases that can be used to evaluate outcomes and help quality improvement in burn care. Differences in the design of the KID and NBR could lead to differing results affecting resultant conclusions and quality improvement programs. This study was designed to validate the use of KID for burn epidemiologic studies, as an adjunct to the NBR. Using the KID (2003, 2006, and 2009), a total of 17,300 nonelective burn patients younger than 20 y old were identified. Data from 13,828 similar patients were collected from the NBR. Outcome variables were compared between the two databases. Comparisons revealed similar patient distribution by gender, race, and burn size. Inhalation injury was more common among the NBR patients and was associated with increased mortality. The rates of respiratory failure, wound infection, cellulitis, sepsis, and urinary tract infection were higher in the KID. Multiple regression analysis adjusting for potential confounders demonstrated similar mortality rate but significantly longer length of stay for patients in the NBR. Despite differences in the design and sampling of the KID and NBR, the overall demographic and mortality results are similar. The differences in complication rate and length of stay should be explored by further studies to clarify underlying causes. Investigations into these differences should also better inform strategies to improve burn prevention and treatment. Copyright © 2016 Elsevier Inc. All rights reserved.

Convective Heat Transfer Scaling of Ignition Delay and Burning Rate with Heat Flux and Stretch Rate in the Equivalent Low Stretch Apparatus

NASA Technical Reports Server (NTRS)

Olson, Sandra

2011-01-01

To better evaluate the buoyant contributions to the convective cooling (or heating) inherent in normal-gravity material flammability test methods, we derive a convective heat transfer correlation that can be used to account for the forced convective stretch effects on the net radiant heat flux for both ignition delay time and burning rate. The Equivalent Low Stretch Apparatus (ELSA) uses an inverted cone heater to minimize buoyant effects while at the same time providing a forced stagnation flow on the sample, which ignites and burns as a ceiling fire. Ignition delay and burning rate data is correlated with incident heat flux and convective heat transfer and compared to results from other test methods and fuel geometries using similarity to determine the equivalent stretch rates and thus convective cooling (or heating) rates for those geometries. With this correlation methodology, buoyant effects inherent in normal gravity material flammability test methods can be estimated, to better apply the test results to low stretch environments relevant to spacecraft material selection.

[Epidemiological changes in burned children. A 10-year follow-up].

PubMed

Rojas Goldsack, María de Los Ángeles; Saavedra Opazo, Rolando; Vicencio Pezo, Paulina; Solís Flores, Fresia

2016-01-01

The aim of the study was to compare the incidence and epidemiological characteristics of burns suffered by children in a district of Santiago of Chile over a period of ten years. An analytical study was conducted by checking through the medical files of children under 15 years of age from Pudahuel district who were admitted with burns to the Santiago Aid to Burned Children Corporation (COANIQUEM) during 2011. A comparison was made with the results obtained in a similar study performed in the same district in 2001. In 2011, 440 children were admitted, with an incidence rate of 700/100,000 <15 years old (95% CI: 635-765), a decrease of 25% compared to 2001(Incidence rate of 933/100,000; 95% CI: 856-1010). There were 52% males, 64.5% under 5 years old of age, 88% burned at home, or at other houses where they are been taking care of. There was a significant change in the causative agent, and included, increasing by their relative importance; hot objects (27.1%). The mechanism that mostly increased in occurrence were contact with stoves or heaters, and also emerge that caused by hair iron, and motorcycle exhaust. The most common location was the hand, increasing by 30.8%, and 66.4% showed an extension of the burn of <1% total body surface area (2001, 61%). A significant decline of 54% of deep burns was observed, and 23.2% were admitted to rehabilitation, a similar proportion to 2001. The rate of hospitalization and/or skin graft decreased from 104/100,000 to 62/100,000<15 years old (95% CI: 43-82). Burns incidence has decreased. Hot objects are now the main causal agent. The decrease in the rate of hospitalization and/or graft indicates a lower severity of burns. Copyright © 2015 Sociedad Chilena de Pediatría. Publicado por Elsevier España, S.L.U. All rights reserved.

A review of negative-pressure wound therapy in the management of burn wounds.

PubMed

Kantak, Neelesh A; Mistry, Riyam; Halvorson, Eric G

2016-12-01

Negative pressure has been employed in various aspects of burn care and the aim of this study was to evaluate the evidence for each of those uses. The PubMed and Cochrane CENTRAL databases were queried for articles in the following areas: negative pressure as a dressing for acute burns, intermediate treatment prior to skin grafting, bolster for skin autografts, dressing for integration of dermal substitutes, dressing for skin graft donor sites, and integrated dressing in large burns. Fifteen studies met our inclusion criteria. One study showed negative pressure wound therapy improved perfusion in acute partial-thickness burns, 8 out of 9 studies showed benefits when used as a skin graft bolster dressing, 1 out of 2 studies showed improved rate of revascularization when used over dermal substitutes, and 1 study showed increased rate of re-epithelialization when used over skin graft donor sites. Negative pressure can improve autograft take when used as a bolster dressing. There is limited data to suggest that it may also improve the rate of revascularization of dermal substitutes and promote re-epithelialization of skin graft donor sites. Other uses suggested by studies that did not meet our inclusion criteria include improving vascularity in acute partial-thickness burns and as an integrated dressing for the management of large burns. Further studies are warranted for most clinical applications to establish negative pressure as an effective adjunct in burn wound care. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Aromatherapy massage seems to enhance relaxation in children with burns: an observational pilot study.

PubMed

O'Flaherty, Linda-Anne; van Dijk, Monique; Albertyn, Rene; Millar, Alastair; Rode, Heinz

2012-09-01

This observational pilot study investigated effects of aromatherapy massage in paediatric burn patients. The setting was a 17 beds level I burn unit in Cape Town, South Africa. Between January and October 2009 heart rates and respiratory rates of patients who underwent aromatherapy massage sessions were read before and after the sessions. Primary outcomes were decline in heart rates and respiratory rates, a sign of relaxation. Behavioural responses (sleep/awake state, facial expression, body posture) were documented as secondary outcomes. A convenience sample of 71 paediatric burn patients (median age 3 years) underwent a total of 126 massage sessions. Mean heart rate decreased significantly from 118 (SD 20) to 109 (SD 21), t=9.8, p<0.001. Mean respiratory rate decreased significantly from 34 (SD 8) to 30 (SD 8), t=10.2, p<0.001. Most massage sessions (92.8%) elicited positive behaviour to the massage, e.g. the child fell asleep, calmed or asked to continue. Nine patients (7.2%) with a median age of 15 months who underwent a single massage session did not show positive behaviour but cried, wriggled or were distressed. Aromatherapy massage seems to be a helpful nonpharmacological approach to reduce hospitalized paediatric burn patients' distress. Future studies with better research designs and validated outcome measures should confirm our findings. Copyright © 2012 Elsevier Ltd and ISBI. All rights reserved.

Burns at KCMC: epidemiology, presentation, management and treatment outcome.

PubMed

Ringo, Y; Chilonga, K

2014-08-01

About 90% of the global burden of burns occurs in the low and middle income countries. In Africa it is estimated that between 17,000 and 30,000 children under five die each year due to burns. In Tanzania there are no specialized burn centers. Burn patients are often managed in the general surgical wards in most hospitals. Kilimanjaro Christian Medical Centre is one of the four tertiary referral hospitals in Tanzania. This study aimed to review the epidemiology presentation management and outcome of burn patients in this challenging environment. A cross-sectional prospective study involving 41 patients was undertaken from October 2011 to April 2012. 65.9% were males. The largest age group was below 5 years (36.6%). 19.5% were epileptic. More than half of the burns were due to open flame. 80.5% had second degree burns. 56.1% had a BSA of 15% or less and 56.1% had an APACHE score of 10 or less. It was found that 73.2% of burns occurred at home. The commonest prehospital first aid applied was honey. Only 41.5% arrived in hospital within the first 24h after burn. Among the 14.6% who had skin grafting, none had early excision of burn wound. 53.7% developed wound sepsis while 24.4% developed contractures. The mortality rate was 26.8%. Children under five are the worst affected by burns. Most patients had second degree burn wounds. Inappropriate management of the burn wound started just after injury and continued even in hospital. Mortality and complication rates are high. Copyright © 2013 Elsevier Ltd and ISBI. All rights reserved.

Suicidal behavior by burns among women in two bordering provinces in Iran

PubMed Central

Alaghehbandan, R.; Dinn, N.A.; Rastegar Lari, E.; Rastegar Lari, A.

2015-01-01

Summary The objective of the study was to describe epidemiologic features of suicidal behavior by burns among women in two bordering provinces in Iran. A prospective hospital-based study of all suicidal behaviors by burns among women was carried out in the Iranian provinces of Khorasan (which borders Afghanistan) and Ilam (which borders Iraq) in 2006. These two provinces suffered from war and economic instability with high rates of poverty and unemployment. Data were obtained from patients, family members, and/or significant others through interviews during the course of hospitalization. Of 181 hospitalized patients, 130 (71.8%) were female, representing a hospital separation rate of 5.4 per 100,000 person-year (P-Y). The rate of suicidal behavior involving burns among the rural population was higher than that in the urban population (6.3 vs. 4.7 per 100,000 P-Y, P = 0.09). The median age of the patients was 23 years old, with a mean (±SD) of 27.9 (±14.3) years old. Approximately 68.5% of women were married. Quarrels with “a family member, spouse, a relative, or a friend” (marital plus other conflicts) was identified as the most common precipitating factor (88.5%) in attempting suicide. More than one third of women were abused (physically and/or verbally) by family members (i.e. spouse, father-in-law). Case fatality rate in this study was 52.3% (68/130). Suicide by burns is still a socio-epidemiological problem in Iran, particularly among young, married women in rural areas. Social and economic conditions, as well as violence against women, play a major role in the high rate of suicide by burns. The findings of this study highlight the need for the implementation of a well-organized approach to reduce the rate of suicide by burns among the most vulnerable populations in Iran. PMID:27252614

Resistance of the boreal forest to high burn rates.

PubMed

Héon, Jessie; Arseneault, Dominique; Parisien, Marc-André

2014-09-23

Boreal ecosystems and their large carbon stocks are strongly shaped by extensive wildfires. Coupling climate projections with records of area burned during the last 3 decades across the North American boreal zone suggests that area burned will increase by 30-500% by the end of the 21st century, with a cascading effect on ecosystem dynamics and on the boreal carbon balance. Fire size and the frequency of large-fire years are both expected to increase. However, how fire size and time since previous fire will influence future burn rates is poorly understood, mostly because of incomplete records of past fire overlaps. Here, we reconstruct the length of overlapping fires along a 190-km-long transect during the last 200 y in one of the most fire-prone boreal regions of North America to document how fire size and time since previous fire will influence future fire recurrence. We provide direct field evidence that extreme burn rates can be sustained by a few occasional droughts triggering immense fires. However, we also show that the most fire-prone areas of the North American boreal forest are resistant to high burn rates because of overabundant young forest stands, thereby creating a fuel-mediated negative feedback on fire activity. These findings will help refine projections of fire effect on boreal ecosystems and their large carbon stocks.

Resistance of the boreal forest to high burn rates

PubMed Central

Héon, Jessie; Arseneault, Dominique; Parisien, Marc-André

2014-01-01

Boreal ecosystems and their large carbon stocks are strongly shaped by extensive wildfires. Coupling climate projections with records of area burned during the last 3 decades across the North American boreal zone suggests that area burned will increase by 30–500% by the end of the 21st century, with a cascading effect on ecosystem dynamics and on the boreal carbon balance. Fire size and the frequency of large-fire years are both expected to increase. However, how fire size and time since previous fire will influence future burn rates is poorly understood, mostly because of incomplete records of past fire overlaps. Here, we reconstruct the length of overlapping fires along a 190-km-long transect during the last 200 y in one of the most fire-prone boreal regions of North America to document how fire size and time since previous fire will influence future fire recurrence. We provide direct field evidence that extreme burn rates can be sustained by a few occasional droughts triggering immense fires. However, we also show that the most fire-prone areas of the North American boreal forest are resistant to high burn rates because of overabundant young forest stands, thereby creating a fuel-mediated negative feedback on fire activity. These findings will help refine projections of fire effect on boreal ecosystems and their large carbon stocks. PMID:25201981

40 CFR Table 13 to Subpart Ddddd... - Alternative Emission Limits for New or Reconstructed Boilers and Process Heaters That Commenced...

Code of Federal Regulations, 2013 CFR

2013-07-01

... oxygen 1 hr minimum sampling time. b. Filterable PM (or TSM) 3.2E-01 lb per MMBtu of heat input; or (4.0E... per run. 13. Units designed to burn liquid fuel a. HCl 1.2E-03 lb per MMBtu of heat input For M26A...

Simulations of electron transport and ignition for direct-drive fast-ignition targets

NASA Astrophysics Data System (ADS)

Solodov, A. A.; Anderson, K. S.; Betti, R.; Gotcheva, V.; Myatt, J.; Delettrez, J. A.; Skupsky, S.; Theobald, W.; Stoeckl, C.

2008-11-01

The performance of high-gain, fast-ignition fusion targets is investigated using one-dimensional hydrodynamic simulations of implosion and two-dimensional (2D) hybrid fluid-particle simulations of hot-electron transport, ignition, and burn. The 2D/3D hybrid-particle-in-cell code LSP [D. R. Welch et al., Nucl. Instrum. Methods Phys. Res. A 464, 134 (2001)] and the 2D fluid code DRACO [P. B. Radha et al., Phys. Plasmas 12, 056307 (2005)] are integrated to simulate the hot-electron transport and heating for direct-drive fast-ignition targets. LSP simulates the transport of hot electrons from the place where they are generated to the dense fuel core where their energy is absorbed. DRACO includes the physics required to simulate compression, ignition, and burn of fast-ignition targets. The self-generated resistive magnetic field is found to collimate the hot-electron beam, increase the coupling efficiency of hot electrons with the target, and reduce the minimum energy required for ignition. Resistive filamentation of the hot-electron beam is also observed. The minimum energy required for ignition is found for hot electrons with realistic angular spread and Maxwellian energy-distribution function.

Evolution of retinal laser therapy: minimum intensity photocoagulation (MIP). Can the laser heal the retina without harming it?

PubMed

Dorin, Giorgio

2004-01-01

Laser photocoagulation is a photo-thermal therapy validated by landmark studies and commonly accepted as the standard of care for various retinal diseases. Although its mechanism of action is still not completely understood, it is normally administered with visible endpoints, true intra-retinal burns that cause chorioretinal scars, which, with time, evolve into expanding areas of atrophy. New hypotheses on the mechanism of action of laser photocoagulation suggest that its therapeutic benefits derive from biologic activities that cannot be inducted within the "burned" area of photocoagulation necrosis, but that occur in the adjacent surrounding areas affected by a lower, sub-lethal, photo-thermal elevation. Thus, the iatrogenic chorioretinal damage caused by visible endpoint photocoagulation may be redundant and an equally effective laser therapy could be administered with minimum intensity photocoagulation (MIP) using laser protocols aiming to create only non-lethal photo-thermal elevations with no intraoperative visible endpoint. It is the purpose of this paper to review laser techniques and clinical protocols that have been utilized to administer retina-sparing MIP treatments that hold the promise of healing the retina while minimizing the iatrogenic harm.

Microbiology and antibiotic resistance in severe burns patients: A 5 year review in an adult burns unit.

PubMed

Bahemia, I A; Muganza, A; Moore, R; Sahid, F; Menezes, C N

2015-11-01

Infections are a major problem in burns patients. Knowledge of the incidence and antimicrobial sensitivities of the microorganisms commonly encountered within each institution's burns unit is important as it informs and directs empiric antibiotic therapy. This was a retrospective review of patients admitted from 1 January 2008 to 31 December 2012 to an adult burns intensive care unit. Specimens chosen for analysis were wound swabs, blood cultures, venous catheter tips, tracheal aspirates, sputum, urine and wound tissue. Records were accessed from the admission register and laboratory information system to obtain the relevant data. During the study period, 352 patients were admitted to the adult burns intensive care unit, of which, 341 patients were included. The mortality rate was 44.6%. Flame burns were the commonest. Mortality rate amongst patients with bacteremia was 46.9%. Acinetobacter baumannii, Pseudomonas aeruginosa and methicillin resistant Staphylococcus aureus (MRSA) were found to be the most common organisms cultured in most specimens. The main three organisms identified in specimen cultures in our adult burns intensive care unit were A. baumannii, P. aeruginosa and MRSA. This study has helped establish a better empiric approach to the management of our septic burns patients. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

The risk of burn injury during long-term oxygen therapy: a 17-year longitudinal national study in Sweden

PubMed Central

Tanash, Hanan A; Huss, Fredrik; Ekström, Magnus

2015-01-01

Background Long-term oxygen therapy (LTOT) improves the survival time in hypoxemic chronic obstructive pulmonary disease. Despite warnings about potential dangers, a considerable number of patients continue to smoke while on LTOT. The incidence of burn injuries related to LTOT is unknown. The aim of this study was to estimate the rate of burn injury requiring health care contact during LTOT. Methods Prospective, population-based, consecutive cohort study of people starting LTOT from any cause between January 1, 1992 and December 31, 2009 in the Swedish National Register of Respiratory Failure (Swedevox). Results In total, 12,497 patients (53% women) were included. The mean (standard deviation) age was 72±9 years. The main reasons for starting LTOT were chronic obstructive pulmonary disease (75%) and pulmonary fibrosis (15%). Only 269 (2%) were active smokers when LTOT was initiated. The median follow-up time to event was 1.5 years (interquartile range, 0.55–3.1). In total, 17 patients had a diagnosed burn injury during 27,890 person-years of LTOT. The rate of burn injury was 61 (95% confidence interval, 36–98) per 100,000 person-years. There was no statistically significant difference in the rate of burn injury between ever-smokers and never-smokers, or between men and women. Conclusion The rate of burn injuries in patients on LTOT seems to be low in Sweden. The strict requirements in Sweden for smoking cessation before LTOT initiation may contribute to this finding. PMID:26622175

Overweight and obesity: overrepresentation in the pediatric reconstructive burn population.

PubMed

Mayes, Theresa; Gottschlich, Michele M; Allgeier, Chris; Khoury, Jane; Kagan, Richard J

2010-01-01

Pediatric burn patients are predisposed to excessive weight gain in the reconstructive period, but the cause is unclear. An overweight (OW) or obese (OB) condition is associated with numerous health risks, decreased physical function, and increased morbidity. The purpose of this study was to compare the frequency of OW status in reconstructive, pediatric burn patients with the prevalence in the US population. The authors reviewed the records of 1533 pediatric patients, >1 year from acute burn, admitted for an elective reconstructive procedure. Body mass index between 85th and 95th percentile, according to the National Center for Health Statistics for 2000 growth charts, was classified as OW, and body mass index >95th percentile was classified as OB. Frequency of OW and OB and racial disparity was calculated as a percentage of total patients and compared with pediatric data from National Health and Nutrition Examination Survey for 1999 to 2006, a nationally representative sample. The rate of OW and OB was 16.3 and 24.1%, respectively, in the authors' pediatric burn population. White patients had OW and OB rates of 15.9 and 23.6%, respectively, compared with 18.2 and 30.2%, respectively, in black patients. All OW and OB rates were outside the 95% confidence interval of the nationally representative National Health and Nutrition Examination Survey population. The rates of OW and OB in pediatric reconstructive burn patients exceed the US population standard across age and race stratifications. The prevention and treatment of excessive weight gain should be a component of rehabilitation in pediatric burns.

Antimicrobial activity of silver nanoparticles synthesized using honey and gamma radiation against silver-resistant bacteria from wounds and burns

NASA Astrophysics Data System (ADS)

Hosny, A. M. S.; Kashef, M. T.; Rasmy, S. A.; Aboul-Magd, D. S.; El-Bazza, Z. E.

2017-12-01

Silver nanoparticles (AgNPs) are promising antimicrobial agents for treatment of wounds and burns. We synthesized AgNPs using honey at different pH values or with different gamma irradiation doses. The resulting nanoparticles were characterized by UV-vis spectroscopy, TEM, DLS and FTIR. Their antimicrobial activity, against standard bacterial strains and silver-resistant clinical isolates from infected wounds and burns, was evaluated in vitro through determination of their minimum inhibitory concentration (MIC). AgNPs prepared using 30 g of honey exposed to 5 kGy gamma radiation had the best physical characters regarding stability and uniformity of particle size and shape. They recorded the lowest MIC values against both the standard and silver-resistant isolates. In conclusion, honey and gamma radiation can be used in synthesis of highly stable pure AgNPs, without affecting the physico-chemical and antimicrobial activity of honey. This offered an advantage in terms of inhibition of silver-resistant bacteria isolates.

Combustion of Nitramine Propellants

DTIC Science & Technology

1983-03-01

through development of a comprehensive analytical model. The ultimate goals are to enable prediction of deflagration rate over a wide pressure range...superior in burn rate prediction , both simple models fail in correlating existing temperature- sensitivity data. (2) In the second part, a...auxiliary condition to enable independent burn rate prediction ; improved melt phase model including decomposition-gas bubbles; model for far-field

A prospective study of time to healing and hypertrophic scarring in paediatric burns: every day counts.

PubMed

Chipp, Elizabeth; Charles, Lisa; Thomas, Clare; Whiting, Kate; Moiemen, Naiem; Wilson, Yvonne

2017-01-01

It is commonly accepted that burns taking longer than 3 weeks to heal have a much higher rate of hypertrophic scarring than those which heal more quickly. However, some of our patients develop hypertrophic scars despite healing within this 3-week period. We performed a prospective study of 383 paediatric burns treated non-operatively at a regional burns centre over a 2-year period from May 2011 to April 2013. Scar assessment was performed by a senior burns therapist using the Vancouver Scar Scale. Overall rates of hypertrophic scarring were 17.2%. Time to healing was the strongest predictor of developing hypertrophic scarring, and the earliest hypertrophic scar developed in a patient who was healed after 8 days. The risk of hypertrophic scarring was multiplied by 1.138 for every additional day taken for the burn wound to heal. There was a trend towards higher rates of hypertrophic scarring in non-white skin types but this did not reach statistical significance. The risk of hypertrophic scarring increases with every day and, therefore, every effort should be made to get the wound healed as quickly as possible, even within the traditional 3-week period usually allowed for healing. We believe that the traditional dogma of aiming for healing within 3 weeks is overly simplistic and should be abandoned: in paediatric burns, every day counts. Not applicable.

Behavior of Explosives Under Pressure in a Diamond Anvil Cell

DOE Office of Scientific and Technical Information (OSTI.GOV)

Foltz, M F

2006-06-20

Diamond anvil cell (DAC) studies can yield information about the pressure dependence of materials and reactions under conditions comparable to shock loading. The pressure gradient across the face of the diamonds is often deliberately minimized to create uniform pressure over much of the sample and a simplified data set. To reach very high pressures (30-40 GPa), however, it may be necessary to use ''softer'', high nitrogen content diamonds that are more susceptible to bending under pressure. The resulting enhanced pressure gradient then provides a view of high-pressure behavior under anisotropic conditions similar to those found at the burn front inmore » a bulk sample. We discuss visual observations of pressure-induced changes relative to variations in burn rate of several explosives (Triaminotrinitrobenzene, Nitromethane, CL-20) in the DAC. The burn rate behavior of both Nitromethane (NM) and Triaminotrinitrobenzene (TATB) were previously reported for pressures up to {approx}40 GPa. Nitromethane showed a near monotonic increase in burn rate to a maximum at {approx}30 GPa after which the burn rate decreased, all without color change. At higher pressures, the TATB samples had shiny (metallic) polycrystalline zones or inclusions where the pressure was highest in the sample. Around the shiny zones was a gradation of color (red to yellow) that appeared to follow the pressure gradient. The color changes are believed related to disturbances in the resonance structure of this explosive as the intermolecular separations decrease with pressure. The color and type of residue found in unvented gaskets after the burn was complete also varied with pressure. The four polymorphs of CL-20 ({alpha}, {beta}, {gamma}, {var_epsilon}-Hexanitrohexaazaisowurtzitane, HNIW) did not change color up to the highest pressure applied ({approx}30 GPa), and each polymorph demonstrated a distinctly different burn rate signature. One polymorph {beta} was so sensitive to laser ignition over a narrow pressure range that the sample could not be aligned with a low power laser without ignition. The burn rate for that one polymorph could only be measured at pressures above and below that unique pressure. This anomalous ignition threshold is discussed with respect to the matrix of possible polymorphs, most of which have not been isolated in the laboratory. The changes in behavior, color and reaction rates of all samples are discussed with respect to possible implications to chemistry at high pressure.« less

29 CFR 520.409 - When will authority to pay apprentices special minimum wages become effective and what is the...

Code of Federal Regulations, 2010 CFR

2010-07-01

... wages become effective and what is the special minimum wage rate? 520.409 Section 520.409 Labor... apprentices special minimum wages become effective and what is the special minimum wage rate? (a) An... Division. (b) The wage rate specified by the apprenticeship program becomes the special minimum wage rate...

Postdischarge Cause-of-Death Analysis of Combat-Related Burn Patients

PubMed Central

Escolas, Sandra M.; Orman, Jean A.; Chung, Kevin K.; Renz, Evan M.

2017-01-01

Combat operations in Iraq and Afghanistan have resulted in up to 8.8% of combat-related casualties suffering burns. From World War I through Desert Storm, burns have been associated with approximately 4% of the combat-related deaths. Experiencing a blast injury and exposure to killing and death while deployed has been shown to increase suicide risk. Although several studies of military populations have investigated risk factors for death among burn patients during the acute phase, no studies have reported mortality rates, cause-of-death, or the prevalence of suicide after hospital discharge. This study examined the case fatality rate, causes of death, and the prevalence of suicide among 830 combat burn patients discharged from the sole burn center in the U.S. Department of Defense, between March 7, 2003 and March 6, 2013. Cause-of-death was determined through the Armed Forces Medical Examiner’s Office and the Office of the Secretary of Defense’s National Death Index. A total of 11 deaths occurred among the 830 burn survivors, for an overall case fatality rate of 1.3%. Of the 11 who died, five deaths were related to accidental poisoning by exposure to drugs; three were related to operations of war (two after returning to the war zone), and the remaining three died from other accidental causes (one explosion and two vehicle crashes). There was no indication of suicide or suspicion of suicide as a cause-of-death for the former patients included in this study, suggesting that combat burn injury did not appear to increase the risk of death by suicide in our study population. Further research is needed to understand the factors that contribute to the apparent resilience of combat burn survivors. PMID:26629656

Rapid prototyping of three-dimensional microstructures from multiwalled carbon nanotubes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hung, W.H.; Kumar, Rajay; Bushmaker, Adam

The authors report a method for creating three-dimensional carbon nanotube structures, whereby a focused laser beam is used to selectively burn local regions of a dense forest of multiwalled carbon nanotubes. Raman spectroscopy and scanning electron microscopy are used to quantify the threshold for laser burnout and depth of burnout. The minimum power density for burning carbon nanotubes in air is found to be 244 {mu}W/{mu}m{sup 2}. We create various three-dimensional patterns using this method, illustrating its potential use for the rapid prototyping of carbon nanotube microstructures. Undercut profiles, changes in nanotube density, and nanoparticle formation are observed after lasermore » surface treatment and provide insight into the dynamic process of the burnout mechanism.« less

The impact of socio-economic deprivation on burn injury: A nine-year retrospective study of 6441 patients.

PubMed

Marsden, N J; Battle, C E; Combellack, E J; Sabra, A; Morris, K; Dickson, W A; Whitaker, I S; Evans, P A

2016-03-01

Low socio-economic status is thought to be associated with increased burn risk, however the significance and generalisability across different populations and cultures has been questioned. A nine-year retrospective study of burn presentations to a large teaching hospital (2005-2014) was performed to investigate the association between socio-economic status and burns. Demographic and injury data was collected via the trust 'Information portal'. The Welsh Index of Multiple: Deprivation 2011 was used to score for socio-economic status. Chi-squared test and Odds Ratios were calculated and statistical significance defined as p<0.05 throughout. 6441 burns were identified, with 755 (11.7%) admitted. Overall incidence rates were the highest published in the UK (0.35/1000/year) with sub group analysis showing the highest rates in under fives and males. Significant relationships between both age and burn mechanism and gender and burn mechanism (p=0.0005) were identified. Scald (67.1%) was the most common mechanism with the upper limb (48%) most commonly burned. Chi square analysis demonstrated a significant relationship between socio-economic deprivation, age and burn incidence (p≤0.0005), with a disproportionately high number of burns in patients under the age of 16 in the most deprived quintile (OR 1.23; 95% CI 1.06-1.44). This study specifically highlights patients under the age of 16 living in poorer socio-economic areas as the most at risk of suffering burns receiving hospital attention. This study demonstrates burns as a significant public health issue, and the results should aid in designing specific burn prevention strategies to target high-risk groups. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Deterrent Concentration Measurement with FTIR and Subsequent Ballistic Performance in Medium Caliber Propellant

NASA Technical Reports Server (NTRS)

Furrow, Keith W.; Ritchie, Steve J.; Morris, Amy

2000-01-01

To meet ballistic requirements, medium and small caliber propellants use deterrent coatings to obtain burn rate progressivity. The required amount and distribution of deterrent varies between gun systems, propellant types, and often between lots. Micro Fourier Transform Infrared (FTIR) spectroscopy was used to measure deterrent gradients in RP36 propellants coated with methyl centralite (MC) at different deterrent levels and different processing conditions. The aromatic C-C bonds at 1496 cm(exp -1) wavenumber were used to monitor the deterrent profiles through the grain. Deterrent gradients measured with FTIR spectroscopy were then used to estimate burn rate gradients in the deterred grains. Burn rates were calculated from literature models and from closed bomb data of RP36 containing uniform deterrent concentration. Finally, the burn rate gradients were input into an IBHFG2 model of a 200 cc-closed bomb. The early flame spreading portion of the closed bomb ballistic cycle (0 to 0.2 P/Pmax) was roughly modeled by dividing the charge up into five propellant decks and igniting them at different times in the ballistic cycle. Pressure traces and vivacity curves from closed bomb shots were compared to predictions. In addition to the burn rate gradient, the closed bomb pressure trace was heavily dependent on ignition and flame spread. These two phenomena were not readily distinguishable from one another in deterred grains. The same RP-36 propellant was shot in a 25 mm M793TP round which was again modeled with IBHVG2. Peak pressure and muzzle velocity were accurately modeled when erosive burning effects were empirically factored into the model.

Effects of oblique air flow on burning rates of square ethanol pool fires.

PubMed

Tao, Changfa; He, Yaping; Li, Yuan; Wang, Xishi

2013-09-15

The effects of downward airflow on the burning rate and/or burning intensity of square alcohol pool fires for different airflow speeds and directions have been studied experimentally in an inclined wind tunnel. An interesting flame-wrapping phenomenon, caused by impingement of air flow, was observed. The mass burning intensity was found to increase with the airflow speed and the impinging angle. The fuel pan rim temperatures were also measured to study the effect of wind direction and speed on heat transfer from the flame to the fuel source. A model based on heat transfer analysis was developed to correlate the burning intensity with the pan rim characteristic temperature. A good correlation was established between the model results and the experimental results. Copyright © 2013 Elsevier B.V. All rights reserved.

Treatments for Common Psychiatric Conditions Among Children and Adolescents During Acute Rehabilitation and Reintegration Phases of Burn Injury

PubMed Central

Arceneaux, Lisa L.; Meyer, Walter J.

2016-01-01

Advances in critical care and surgical management during the last 20 years have decreased mortality rates among children with severe burn injuries. This improved survival rate has prompted researchers to study the psychological aspects of recovering from a burn injury. Initially, research focused primarily on epidemiology, prevention and descriptions of the psychological phenomenon experienced by the children and adolescents. Whereas, previously, interventions were often utilized during the acute phases of burn injury without knowledge of the long-term effects, more recently, priorities have shifted to include long-term treatment outcome studies. The purpose of this paper is to review and discuss the current evidenced-based techniques and their efficacy in the treatment of common psychological and psychiatric conditions among children and adolescents during the 3 major phases of burn injury. PMID:19919208

Improving Diagnosis of Sepsis After Burn Injury Using a Portable Sepsis Alert System

DTIC Science & Technology

vital signs of heart rate variability, regional tissue oxygenation, and noninvasive cardiac output can diagnose burn sepsis earlier, reducing...morbidity and mortality. Rationale: Heart Rate Variability (HRV), regional Tissue Oxygenation, and non-invasive Cardiac Output (CO), have shown promise in

Computer Program Applications to Tactical Missile Conceptual Design.

DTIC Science & Technology

1981-06-01

initialized at a potential maximum of 1.25 inches/second (Ref. 21 and is allowed to decrease to arrive at a compati- ble burn area and web thickness...the same restrictions. The burn rate starts at 0.45 inches/sec- ond (Ref. 21 and is decreased to provide an acceptable web thickness and burn area. The...0.45 inches/sec- ond to provide a proper web thickness. "THE.SUSTAINER MOTOR HAS AN END BURNING GRAIN." The required burn area for the sustainer was

Predictors of muscle protein synthesis after severe pediatric burns

USDA-ARS?s Scientific Manuscript database

Objectives: Following a major burn, muscle protein synthesis rate increases but in most patients, this response is not sufficient to compensate the also elevated protein breakdown. Given the long-term nature of the pathophysiologic response to burn injury, we hypothesized that skeletal muscle prot...

Benchmarking Outcomes in the Critically Injured Burn Patient

PubMed Central

Klein, Matthew B.; Goverman, Jeremy; Hayden, Douglas L.; Fagan, Shawn P.; McDonald-Smith, Grace P.; Alexander, Andrew K.; Gamelli, Richard L.; Gibran, Nicole S.; Finnerty, Celeste C.; Jeschke, Marc G.; Arnoldo, Brett; Wispelwey, Bram; Mindrinos, Michael N.; Xiao, Wenzhong; Honari, Shari E.; Mason, Philip H.; Schoenfeld, David A.; Herndon, David N.; Tompkins, Ronald G.

2014-01-01

Objective To determine and compare outcomes with accepted benchmarks in burn care at six academic burn centers. Background Since the 1960s, U.S. morbidity and mortality rates have declined tremendously for burn patients, likely related to improvements in surgical and critical care treatment. We describe the baseline patient characteristics and well-defined outcomes for major burn injuries. Methods We followed 300 adults and 241 children from 2003–2009 through hospitalization using standard operating procedures developed at study onset. We created an extensive database on patient and injury characteristics, anatomic and physiological derangement, clinical treatment, and outcomes. These data were compared with existing benchmarks in burn care. Results Study patients were critically injured as demonstrated by mean %TBSA (41.2±18.3 for adults and 57.8±18.2 for children) and presence of inhalation injury in 38% of the adults and 54.8% of the children. Mortality in adults was 14.1% for those less than 55 years old and 38.5% for those age ≥55 years. Mortality in patients less than 17 years old was 7.9%. Overall, the multiple organ failure rate was 27%. When controlling for age and %TBSA, presence of inhalation injury was not significant. Conclusions This study provides the current benchmark for major burn patients. Mortality rates, notwithstanding significant % TBSA and presence of inhalation injury, have significantly declined compared to previous benchmarks. Modern day surgical and medically intensive management has markedly improved to the point where we can expect patients less than 55 years old with severe burn injuries and inhalation injury to survive these devastating conditions. PMID:24722222

Temporal resolution requirements of satellite constellations for 30 m global burned area mapping

NASA Astrophysics Data System (ADS)

Melchiorre, A.; Boschetti, L.

2017-12-01

Global burned area maps have been generated systematically with daily, coarse resolution satellite data (Giglio et al. 2013). The production of moderate resolution (10 - 30 m) global burned area products would meet the needs of several user communities: improved carbon emission estimations due to heterogeneous landscapes and for local scale air quality and fire management applications (Mouillot et al. 2014; van der Werf et al. 2010). While the increased spatial resolution reduces the influence of mixed burnt/unburnt pixels and it would increase the spectral separation of burned areas, moderate resolution satellites have reduced temporal resolution (10 - 16 days). Fire causes a land-cover change spectrally visible for a period ranging from a few weeks in savannas to over a year in forested ecosystems (Roy et al. 2010); because clouds, smoke, and other optically thick aerosols limit the number of available observations (Roy et al. 2008; Smith and Wooster 2005), burned areas might disappear before they are observed by moderate resolution sensors. Data fusion from a constellation of different sensors has been proposed to overcome these limits (Boschetti et al. 2015; Roy 2015). In this study, we estimated the probability of moderate resolution satellites and virtual constellations (including Landsat-8/9, Sentinel-2A/B) to provide sufficient observations for burned area mapping globally, and by ecosystem. First, we estimated the duration of the persistence of the signal associated with burned areas by combining the MODIS Global Burned Area and the Nadir BRDF-Adjusted Reflectance Product by characterizing the post-fire trends in reflectance to determine the length of the period in which the burn class is spectrally distinct from the unburned and, therefore, detectable. The MODIS-Terra daily cloud data were then used to estimate the probability of cloud cover. The cloud probability was used at each location to estimate the minimum revisit time needed to obtain at least one cloud-free observation within the duration of the persistence of burned areas. As complementary results, the expected omission error due to insufficient observations was estimated for each of the satellite combination considered making use of the calendar and geometry of acquisition for each of the sensor included in the virtual constellation.

Organic molecular tracers in the atmospheric aerosols from Lumbini, Nepal, in the northern Indo-Gangetic Plain: influence of biomass burning

NASA Astrophysics Data System (ADS)

Wan, Xin; Kang, Shichang; Li, Quanlian; Rupakheti, Dipesh; Zhang, Qianggong; Guo, Junming; Chen, Pengfei; Tripathee, Lekhendra; Rupakheti, Maheswar; Panday, Arnico K.; Wang, Wu; Kawamura, Kimitaka; Gao, Shaopeng; Wu, Guangming; Cong, Zhiyuan

2017-07-01

To better understand the characteristics of biomass burning in the northern Indo-Gangetic Plain (IGP), total suspended particles were collected in a rural site, Lumbini, Nepal, during April 2013 to March 2014 and analyzed for the biomass burning tracers (i.e., levoglucosan, mannosan, vanillic acid). The annual average concentration of levoglucosan was 734 ± 1043 ng m-3 with the maximum seasonal mean concentration during post-monsoon season (2206 ± 1753 ng m-3), followed by winter (1161 ± 1347 ng m-3), pre-monsoon (771 ± 524 ng m-3) and minimum concentration during monsoon season (212 ± 279 ng m-3). The other biomass burning tracers (mannosan, galactosan, p-hydroxybenzoic acid, vanillic acid, syringic acid and dehydroabietic acid) also showed the similar seasonal variations. There were good correlations among levoglucosan, organic carbon (OC) and elemental carbon (EC), indicating significant impact of biomass burning activities on carbonaceous aerosol loading throughout the year in Lumbini area. According to the characteristic ratios, levoglucosan / mannosan (lev / man) and syringic acid / vanillic acid (syr / van), we deduced that the high abundances of biomass burning products during non-monsoon seasons were mainly caused by the burning of crop residues and hardwood while the softwood had less contribution. Based on the diagnostic tracer ratio (i.e., lev / OC), the OC derived from biomass burning constituted large fraction of total OC, especially during post-monsoon season. By analyzing the MODIS fire spot product and 5-day air-mass back trajectories, we further demonstrated that organic aerosol composition was not only related to the local agricultural activities and residential biomass usage but also impacted by the regional emissions. During the post-monsoon season, the emissions from rice residue burning in western India and eastern Pakistan could impact particulate air pollution in Lumbini and surrounding regions in southern Nepal. Therefore, our finding is meaningful and has a great importance for adopting the appropriate mitigation measures, not only at the local level but also by involving different regions and nations, to reduce the biomass burning emissions in the broader IGP region nations.

Radiative forcing associated with particulate carbon emissions resulting from the use of mercury control technology.

PubMed

Lin, Guangxing; Penner, Joyce E; Clack, Herek L

2014-09-02

Injection of powdered activated carbon (PAC) adsorbents into the flue gas of coal fired power plants with electrostatic precipitators (ESPs) is the most mature technology to control mercury emissions for coal combustion. However, the PAC itself can penetrate ESPs to emit into the atmosphere. These emitted PACs have similar size and optical properties to submicron black carbon (BC) and thus could increase BC radiative forcing unintentionally. The present paper estimates, for the first time, the potential emission of PAC together with their climate forcing. The global average maximum potential emissions of PAC is 98.4 Gg/yr for the year 2030, arising from the assumed adoption of the maximum potential PAC injection technology, the minimum collection efficiency, and the maximum PAC injection rate. These emissions cause a global warming of 2.10 mW m(-2) at the top of atmosphere and a cooling of -2.96 mW m(-2) at the surface. This warming represents about 2% of the warming that is caused by BC from direct fossil fuel burning and 0.86% of the warming associated with CO2 emissions from coal burning in power plants. Its warming is 8 times more efficient than the emitted CO2 as measured by the 20-year-integrated radiative forcing per unit of carbon input (the 20-year Global Warming Potential).

Modelling Carbon Emissions in Calluna vulgaris–Dominated Ecosystems when Prescribed Burning and Wildfires Interact

PubMed Central

Santana, Victor M.; Alday, Josu G.; Lee, HyoHyeMi; Allen, Katherine A.; Marrs, Rob H.

2016-01-01

A present challenge in fire ecology is to optimize management techniques so that ecological services are maximized and C emissions minimized. Here, we modeled the effects of different prescribed-burning rotation intervals and wildfires on carbon emissions (present and future) in British moorlands. Biomass-accumulation curves from four Calluna-dominated ecosystems along a north-south gradient in Great Britain were calculated and used within a matrix-model based on Markov Chains to calculate above-ground biomass-loads and annual C emissions under different prescribed-burning rotation intervals. Additionally, we assessed the interaction of these parameters with a decreasing wildfire return intervals. We observed that litter accumulation patterns varied between sites. Northern sites (colder and wetter) accumulated lower amounts of litter with time than southern sites (hotter and drier). The accumulation patterns of the living vegetation dominated by Calluna were determined by site-specific conditions. The optimal prescribed-burning rotation interval for minimizing annual carbon emissions also differed between sites: the optimal rotation interval for northern sites was between 30 and 50 years, whereas for southern sites a hump-backed relationship was found with the optimal interval either between 8 to 10 years or between 30 to 50 years. Increasing wildfire frequency interacted with prescribed-burning rotation intervals by both increasing C emissions and modifying the optimum prescribed-burning interval for minimum C emission. This highlights the importance of studying site-specific biomass accumulation patterns with respect to environmental conditions for identifying suitable fire-rotation intervals to minimize C emissions. PMID:27880840

Burns and long-term infectious disease morbidity: A population-based study.

PubMed

Duke, Janine M; Randall, Sean M; Wood, Fiona M; Boyd, James H; Fear, Mark W

2017-03-01

There is a growing volume of data that indicates that serious injury suppresses immune function, predisposing individuals to infectious complications. With recent evidence showing long-term immune dysfunction after less severe burn, this study aimed to investigate post-burn infectious disease morbidity and assess if burn patients have increased long-term hospital use for infectious diseases. A population-based longitudinal study using linked hospital morbidity and death data from Western Australia for all persons hospitalised for a first burn (n=30,997) in 1980-2012. A frequency matched non-injury comparison cohort was randomly selected from Western Australia's birth registrations and electoral roll (n=123,399). Direct standardisation was used to assess temporal trends in infectious disease admissions. Crude annual admission rates and length of stay for infectious diseases were calculated. Multivariate negative binomial and Cox proportional hazards regression modeling were used to generate adjusted incidence rate ratios (IRR) and hazard ratios (HR), respectively. After adjustment for demographic factors and pre-existing health status, the burn cohort had twice (IRR, 95% confidence interval (CI): 2.04, 1.98-2.22) as many admissions and 3.5 times the number of days in hospital (IRR, 95%CI: 3.46, 3.05-3.92) than the uninjured cohort for infectious diseases. Higher rates of infectious disease admissions were found for severe (IRR, 95%CI: 2.37, 1.89-2.97) and minor burns (IRR, 95%CI: 2.22, 2.11-2.33). Burns were associated with significantly increased incident admissions: 0-30days (HR, 95%CI: 5.18, 4.15-6.48); 30days-1year (HR, 95%CI: 1.69, 1.53-1.87); 1-10 years (HR, 95%CI: 1.40:1.33-1.47); >10years (HR, 95%CI: 1.16, 1.08-1.24). Respiratory, skin and soft tissue and gastrointestinal infections were the most common. The burn cohort had a 1.75 (95%CI: 1.37-2.25) times greater rate of mortality caused by infectious diseases during the 5-year period after discharge than the uninjured cohort. These findings suggest that burn has long-lasting effects on the immune system and its function. The increase in infectious disease in three different epithelial tissues in the burn cohort suggests there may be common underlying pathophysiology. Further research to understand the underlying mechanisms are required to inform clinical interventions to mitigate infectious disease after burn and improve patient outcomes. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Burning rate for steel-cased, pressed binderless HMX

NASA Technical Reports Server (NTRS)

Fifer, R. A.; Cole, J. E.

1980-01-01

The burning behavior of pressed binderless HMX laterally confined in 6.4 mm i.d. steel cases was measured over the pressure range 1.45 to 338 MPa in a constant pressure strand burner. The measured regression rates are compared to those reported previously for unconfined samples. It is shown that lateral confinement results in a several-fold decrease in the regression rate for the coarse particle size HMX above the transition to super fast regression. For class E samples, confinement shifts the transition to super fast regression from low pressure to high pressure. These results are interpreted in terms of the previously proposed progressive deconsolidation mechanism. Preliminary holographic photography and closed bomb tests are also described. Theoretical one dimensional modeling calculations were carried out to predict the expected flame height (particle burn out distance) as a function of particle size and pressure for binderless HMX burning by a progressive deconsolidation mechanism.

Evidence based management for paediatric burn: new approaches and improved scar outcomes.

PubMed

Kishikova, Lyudmila; Smith, Matthew D; Cubison, Tania C S

2014-12-01

Little evidence has been produced on the best practice for managing paediatric burns. We set out to develop a formal approach based on the finding that hypertrophic scarring is related to healing-time, with durations under 21 days associated with improved scar outcome. Incorporating new advances in burn care, we compared outcomes under the new approach to a cohort treated previously. Our study was a retrospective cross-sectional case note study, with demographic, treatment and outcome information collected. The management and outcome of each case was assessed and compared against another paediatric burns cohort from 2006. 181 burns presenting across a six month period were analysed (2010 cohort) and compared to 337 children from a previous cohort from 2006. Comparison of patients between cohorts showed an overall shift towards shorter healing-times in the 2010 cohort. A lower overall rate of hypertrophic scarring was seen in the 2010 cohort, and for corresponding healing-times after injury, hypertrophic scarring rates were halved in comparison to the 2006 cohort. We demonstrate that the use of a structured approach for paediatric burns has improved outcomes with regards to healing-time and hypertrophic scarring rate. This approach allows maximisation of healing potential and implements aggressive prophylactic measures. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

MSFR TRU-burning potential and comparison with an SFR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fiorina, C.; Cammi, A.; Franceschini, F.

2013-07-01

The objective of this work is to evaluate the Molten Salt Fast Reactor (MSFR) potential benefits in terms of transuranics (TRU) burning through a comparative analysis with a sodium-cooled FR. The comparison is based on TRU- and MA-burning rates, as well as on the in-core evolution of radiotoxicity and decay heat. Solubility issues limit the TRU-burning rate to 1/3 that achievable in traditional low-CR FRs (low-Conversion-Ratio Fast Reactors). The softer spectrum also determines notable radiotoxicity and decay heat of the equilibrium actinide inventory. On the other hand, the liquid fuel suggests the possibility of using a Pu-free feed composed onlymore » of Th and MA (Minor Actinides), thus maximizing the MA burning rate. This is generally not possible in traditional low-CR FRs due to safety deterioration and decay heat of reprocessed fuel. In addition, the high specific power and the lack of out-of-core cooling times foster a quick transition toward equilibrium, which improves the MSFR capability to burn an initial fissile loading, and makes the MSFR a promising system for a quick (i.e., in a reactor lifetime) transition from the current U-based fuel cycle to a novel closed Th cycle. (authors)« less

Soil respiration and root biomass responses to burning in calabrian pine (Pinus brutia) stands in Edirne, Turkey.

PubMed

Tufekcioglu, Aydin; Kucuk, Mehmet; Bilmis, Tuncay; Altun, Lokman; Yilmaz, Murat

2010-01-01

In this study soil properties and root biomass responses to prescribed fire were investigated in 25-30 year-old calabrian pine (Pinus brutia Ten.) stands in Edirne, Turkey. The stands were established by planting and were subjected to prescribed burning in July 2005. Soil respiration rates were determined every two months using the soda-lime method over a two-year period. Fine (> or = 2 mm diameter) and small root (> 2-5 mm diameter) biomass were sampled approximately bimonthly using the sequential coring method. Soil respiration rates in burned sites were significantly higher than in control sites during the summer season but there was no significant difference in the other seasons. Soil respiration rates were correlated significantly with soil moisture and soil temperature. Fine and small root biomass were significantly lower in burned sites than in control sites. Mean fine root biomass values were 3204 kg ha(-1) for burned and 3772 kg ha(-1) for control sites. Annual soil CO2 releases totaled 515 g Cm(-2) for burned and 418 g C m(-2) for control sites. Our results indicate that, depending on site conditions, fire could be used successfully as a tool in the management of calabrian pine stands in the study area.

A Computer Program to Evaluate Experimental Therapies for Treating Burned Patients

PubMed Central

Flora, Jairus D.; Flora, Sharyl Ann

1980-01-01

Determining the worth of new therapies for burn patients has been difficult because of the rarity of the burn injury and the disparate survival chances associated with different sizes of burns. Recently a burn survival model has been developed that estimates the risk of death from a burn as a function of the patient's age, sex, area of full thickness (third degree) burn, area of partial thickness burn, involvement of the perineum, and time from burn to admission. An alternative risk model uses the total area burned in place of the areas of partial thickness burn and full thickness burn, and is appropriate if the amount of full thickness burn is not determined accurately. This paper describes a program that uses these risk models to correct or standardize for demographic and severity factors, then, after that adjustment, tests whether a group of burn patients who received a new or experimental therapy shows a significantly better survival rate than that predicted by a baseline model. The program is a simple one written in Fortran for easy adaptation to other computer systems.

Experimental Methodology for Estimation of Local Heat Fluxes and Burning Rates in Steady Laminar Boundary Layer Diffusion Flames.

PubMed

Singh, Ajay V; Gollner, Michael J

2016-06-01

Modeling the realistic burning behavior of condensed-phase fuels has remained out of reach, in part because of an inability to resolve the complex interactions occurring at the interface between gas-phase flames and condensed-phase fuels. The current research provides a technique to explore the dynamic relationship between a combustible condensed fuel surface and gas-phase flames in laminar boundary layers. Experiments have previously been conducted in both forced and free convective environments over both solid and liquid fuels. A unique methodology, based on the Reynolds Analogy, was used to estimate local mass burning rates and flame heat fluxes for these laminar boundary layer diffusion flames utilizing local temperature gradients at the fuel surface. Local mass burning rates and convective and radiative heat feedback from the flames were measured in both the pyrolysis and plume regions by using temperature gradients mapped near the wall by a two-axis traverse system. These experiments are time-consuming and can be challenging to design as the condensed fuel surface burns steadily for only a limited period of time following ignition. The temperature profiles near the fuel surface need to be mapped during steady burning of a condensed fuel surface at a very high spatial resolution in order to capture reasonable estimates of local temperature gradients. Careful corrections for radiative heat losses from the thermocouples are also essential for accurate measurements. For these reasons, the whole experimental setup needs to be automated with a computer-controlled traverse mechanism, eliminating most errors due to positioning of a micro-thermocouple. An outline of steps to reproducibly capture near-wall temperature gradients and use them to assess local burning rates and heat fluxes is provided.

Experimental Methodology for Estimation of Local Heat Fluxes and Burning Rates in Steady Laminar Boundary Layer Diffusion Flames

PubMed Central

Singh, Ajay V.; Gollner, Michael J.

2016-01-01

Modeling the realistic burning behavior of condensed-phase fuels has remained out of reach, in part because of an inability to resolve the complex interactions occurring at the interface between gas-phase flames and condensed-phase fuels. The current research provides a technique to explore the dynamic relationship between a combustible condensed fuel surface and gas-phase flames in laminar boundary layers. Experiments have previously been conducted in both forced and free convective environments over both solid and liquid fuels. A unique methodology, based on the Reynolds Analogy, was used to estimate local mass burning rates and flame heat fluxes for these laminar boundary layer diffusion flames utilizing local temperature gradients at the fuel surface. Local mass burning rates and convective and radiative heat feedback from the flames were measured in both the pyrolysis and plume regions by using temperature gradients mapped near the wall by a two-axis traverse system. These experiments are time-consuming and can be challenging to design as the condensed fuel surface burns steadily for only a limited period of time following ignition. The temperature profiles near the fuel surface need to be mapped during steady burning of a condensed fuel surface at a very high spatial resolution in order to capture reasonable estimates of local temperature gradients. Careful corrections for radiative heat losses from the thermocouples are also essential for accurate measurements. For these reasons, the whole experimental setup needs to be automated with a computer-controlled traverse mechanism, eliminating most errors due to positioning of a micro-thermocouple. An outline of steps to reproducibly capture near-wall temperature gradients and use them to assess local burning rates and heat fluxes is provided. PMID:27285827

Sustained high incidence of injuries from burns in a densely populated urban slum in Kenya: an emerging public health priority.

PubMed

Wong, Joshua M; Nyachieo, Dhillon O; Benzekri, Noelle A; Cosmas, Leonard; Ondari, Daniel; Yekta, Shahla; Montgomery, Joel M; Williamson, John M; Breiman, Robert F

2014-09-01

Ninety-five percent of burn deaths occur in low- and middle-income countries (LMICs); however, longitudinal household-level studies have not been done in urban slum settings, where overcrowding and unsafe cook stoves may increase likelihood of injury. Using a prospective, population-based disease surveillance system in the urban slum of Kibera in Kenya, we examined the incidence of household-level burns of all severities from 2006-2011. Of approximately 28,500 enrolled individuals (6000 households), we identified 3072 burns. The overall incidence was 27.9/1000 person-years-of-observation. Children <5 years old sustained burns at 3.8-fold greater rate compared to (p<0.001) those ≥5 years old. Females ≥5 years old sustained burns at a rate that was 1.35-fold (p<0.001) greater than males within the same age distribution. Hospitalizations were uncommon (0.65% of all burns). The incidence of burns, 10-fold greater than in most published reports from Africa and Asia, suggests that such injuries may contribute more significantly than previously thought to morbidity in LMICs, and may be increased by urbanization. As migration from rural areas into urban slums rapidly increases in many African countries, characterizing and addressing the rising burden of burns is likely to become a public health priority. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Relationship between Slivering Point and Gas Generation Rules of 19-Perforation TEGDN Propellants with Different Length/Outside Diameter Ratios and Perforation Diameters

NASA Astrophysics Data System (ADS)

Xiao, Zhenggang; Xu, Fuming

2018-04-01

In order to investigate the relationship between the slivering point and burning progressivity, a set of 19-perforation propellants containing triethylene glycol dinitrate (TEGDN) with different lengths/outside diameter ratios and perforation diameters was prepared and tested in a closed vessel. The mass fraction of burnt propellant was derived from the recorded pressure-time history of 19-perforation TEGDN propellants in the closed vessel according to the gas state equation and the form function of tested propellants. Based on the form function calculation and the mass fraction of burnt propellant, instantaneous burning surface area and the burning rate were obtained. The influence of length/outside diameter ratios and perforation diameters on the progressive combustion performance is studied through the dynamic vivacity method. With an increase in the length/outsider diameter, the slivering point occurs earlier and the slivering process lasts longer. Further, the burning progressivity of surface area can be improved. For propellants with same length/outside diameter ratio, with a decreasing of perforation diameter, the slivering point lags behind and the burning progressivity becomes greater. The slivering point corresponds to the instantaneous burning area, which is related to the form function and total burning process as well. However, the total burning progressivity of propellant is a very comprehensive result of propellant under multiple actions, including the mass fraction of burnt propellant, grain size and burning rate at different pressure regions. The correlation between them can boost a better understanding on the interaction between grain size, slivering burning process and burning progressivity.

Total inpatient treatment costs in patients with severe burns: towards a more accurate reimbursement model.

PubMed

Mehra, Tarun; Koljonen, Virve; Seifert, Burkhardt; Volbracht, Jörk; Giovanoli, Pietro; Plock, Jan; Moos, Rudolf Maria

2015-01-01

Reimbursement systems have difficulties depicting the actual cost of burn treatment, leaving care providers with a significant financial burden. Our aim was to establish a simple and accurate reimbursement model compatible with prospective payment systems. A total of 370 966 electronic medical records of patients discharged in 2012 to 2013 from Swiss university hospitals were reviewed. A total of 828 cases of burns including 109 cases of severe burns were retained. Costs, revenues and earnings for severe and nonsevere burns were analysed and a linear regression model predicting total inpatient treatment costs was established. The median total costs per case for severe burns was tenfold higher than for nonsevere burns (179 949 CHF [167 353 EUR] vs 11 312 CHF [10 520 EUR], interquartile ranges 96 782-328 618 CHF vs 4 874-27 783 CHF, p <0.001). The median of earnings per case for nonsevere burns was 588 CHF (547 EUR) (interquartile range -6 720 - 5 354 CHF) whereas severe burns incurred a large financial loss to care providers, with median earnings of -33 178 CHF (30 856 EUR) (interquartile range -95 533 - 23 662 CHF). Differences were highly significant (p <0.001). Our linear regression model predicting total costs per case with length of stay (LOS) as independent variable had an adjusted R2 of 0.67 (p <0.001 for LOS). Severe burns are systematically underfunded within the Swiss reimbursement system. Flat-rate DRG-based refunds poorly reflect the actual treatment costs. In conclusion, we suggest a reimbursement model based on a per diem rate for treatment of severe burns.

Double-detonation Sub-Chandrasekhar Supernovae: Synthetic Observables for Minimum Helium Shell Mass Models

NASA Astrophysics Data System (ADS)

Kromer, M.; Sim, S. A.; Fink, M.; Röpke, F. K.; Seitenzahl, I. R.; Hillebrandt, W.

2010-08-01

In the double-detonation scenario for Type Ia supernovae, it is suggested that a detonation initiates in a shell of helium-rich material accreted from a companion star by a sub-Chandrasekhar-mass white dwarf. This shell detonation drives a shock front into the carbon-oxygen white dwarf that triggers a secondary detonation in the core. The core detonation results in a complete disruption of the white dwarf. Earlier studies concluded that this scenario has difficulties in accounting for the observed properties of Type Ia supernovae since the explosion ejecta are surrounded by the products of explosive helium burning in the shell. Recently, however, it was proposed that detonations might be possible for much less massive helium shells than previously assumed (Bildsten et al.). Moreover, it was shown that even detonations of these minimum helium shell masses robustly trigger detonations of the carbon-oxygen core (Fink et al.). Therefore, it is possible that the impact of the helium layer on observables is less than previously thought. Here, we present time-dependent multi-wavelength radiative transfer calculations for models with minimum helium shell mass and derive synthetic observables for both the optical and γ-ray spectral regions. These differ strongly from those found in earlier simulations of sub-Chandrasekhar-mass explosions in which more massive helium shells were considered. Our models predict light curves that cover both the range of brightnesses and the rise and decline times of observed Type Ia supernovae. However, their colors and spectra do not match the observations. In particular, their B - V colors are generally too red. We show that this discrepancy is mainly due to the composition of the burning products of the helium shell of the Fink et al. models which contain significant amounts of titanium and chromium. Using a toy model, we also show that the burning products of the helium shell depend crucially on its initial composition. This leads us to conclude that good agreement between sub-Chandrasekhar-mass explosions and observed Type Ia supernovae may still be feasible but further study of the shell properties is required.

Interactive effects of fire, soil climate, and moss on CO2 fluxes in black spruce ecosystems of interior Alaska

USGS Publications Warehouse

O'Donnell, J. A.; Turetsky, M.R.; Harden, J.W.; Manies, K.L.; Pruett, L.E.; Shetler, G.; Neff, J.C.

2009-01-01

Fire is an important control on the carbon (C) balance of the boreal forest region. Here, we present findings from two complementary studies that examine how fire modifies soil organic matter properties, and how these modifications influence rates of decomposition and C exchange in black spruce (Picea mariana) ecosystems of interior Alaska. First, we used laboratory incubations to explore soil temperature, moisture, and vegetation effects on CO2 and DOC production rates in burned and unburned soils from three study regions in interior Alaska. Second, at one of the study regions used in the incubation experiments, we conducted intensive field measurements of net ecosystem exchange (NEE) and ecosystem respiration (ER) across an unreplicated factorial design of burning (2 year post-fire versus unburned sites) and drainage class (upland forest versus peatland sites). Our laboratory study showed that burning reduced the sensitivity of decomposition to increased temperature, most likely by inducing moisture or substrate quality limitations on decomposition rates. Burning also reduced the decomposability of Sphagnum-derived organic matter, increased the hydrophobicity of feather moss-derived organic matter, and increased the ratio of dissolved organic carbon (DOC) to total dissolved nitrogen (TDN) in both the upland and peatland sites. At the ecosystem scale, our field measurements indicate that the surface organic soil was generally wetter in burned than in unburned sites, whereas soil temperature was not different between the burned and unburned sites. Analysis of variance results showed that ER varied with soil drainage class but not by burn status, averaging 0.9 ?? 0.1 and 1.4 ?? 0.1 g C m-2d-1 in the upland and peatland sites, respectively. However, a more complex general linear model showed that ER was controlled by an interaction between soil temperature, moisture, and burn status, and in general was less variable over time in the burned than in the unburned sites. Together, findings from these studies across different spatial scales suggest that although fire can create some soil climate conditions more conducive to rapid decomposition, rates of C release from soils may be constrained following fire by changes in moisture and/or substrate quality that impede rates of decomposition. ?? 2008 Springer Science+Business Media, LLC.

Interactive effects of fire, soil climate, and moss on CO2 fluxes in black spruce ecosystems of interior Alaska

USGS Publications Warehouse

O'Donnell, Jonathan A.; Turetsky, Merritt R.; Harden, Jennifer W.; Manies, Kristen L.; Pruett, L.E.; Shetler, Gordon; Neff, Jason C.

2009-01-01

Fire is an important control on the carbon (C) balance of the boreal forest region. Here, we present findings from two complementary studies that examine how fire modifies soil organic matter properties, and how these modifications influence rates of decomposition and C exchange in black spruce (Picea mariana) ecosystems of interior Alaska. First, we used laboratory incubations to explore soil temperature, moisture, and vegetation effects on CO2 and DOC production rates in burned and unburned soils from three study regions in interior Alaska. Second, at one of the study regions used in the incubation experiments, we conducted intensive field measurements of net ecosystem exchange (NEE) and ecosystem respiration (ER) across an unreplicated factorial design of burning (2 year post-fire versus unburned sites) and drainage class (upland forest versus peatland sites). Our laboratory study showed that burning reduced the sensitivity of decomposition to increased temperature, most likely by inducing moisture or substrate quality limitations on decomposition rates. Burning also reduced the decomposability of Sphagnum-derived organic matter, increased the hydrophobicity of feather moss-derived organic matter, and increased the ratio of dissolved organic carbon (DOC) to total dissolved nitrogen (TDN) in both the upland and peatland sites. At the ecosystem scale, our field measurements indicate that the surface organic soil was generally wetter in burned than in unburned sites, whereas soil temperature was not different between the burned and unburned sites. Analysis of variance results showed that ER varied with soil drainage class but not by burn status, averaging 0.9 ± 0.1 and 1.4 ± 0.1 g C m−2 d−1 in the upland and peatland sites, respectively. However, a more complex general linear model showed that ER was controlled by an interaction between soil temperature, moisture, and burn status, and in general was less variable over time in the burned than in the unburned sites. Together, findings from these studies across different spatial scales suggest that although fire can create some soil climate conditions more conducive to rapid decomposition, rates of C release from soils may be constrained following fire by changes in moisture and/or substrate quality that impede rates of decomposition.

On the Dependence of the X-Ray Burst Rate on Accretion and Spin Rate

NASA Astrophysics Data System (ADS)

Cavecchi, Yuri; Watts, Anna L.; Galloway, Duncan K.

2017-12-01

Nuclear burning and its dependence on the mass accretion rate are fundamental ingredients for describing the complicated observational phenomenology of neutron stars (NSs) in binary systems. Motivated by high-quality burst rate data emerging from large statistical studies, we report general calculations relating the bursting rate to the mass accretion rate and NS rotation frequency. In this first work, we ignore general relativistic effects and accretion topology, although we discuss where their inclusion should play a role. The relations we derive are suitable for different burning regimes and provide a direct link between parameters predicted by theory and what is to be expected in observations. We illustrate this for analytical relations of different unstable burning regimes that operate on the surface of an accreting NS. We also use the observed behavior of the burst rate to suggest new constraints on burning parameters. We are able to provide an explanation for the long-standing problem of the observed decrease of the burst rate with increasing mass accretion that follows naturally from these calculations: when the accretion rate crosses a certain threshold, ignition moves away from its initially preferred site, and this can cause a net reduction of the burst rate due to the effects of local conditions that set local differences in both the burst rate and stabilization criteria. We show under which conditions this can happen even if locally the burst rate keeps increasing with accretion.

Burning mechanism and regression rate of RX-35-AU and RX-35-AV as a function of HMX particle size measured by the hybrid closed bomb-strand burner

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tao, W.C.; Costantino, M.S.; Ornellas, D.L.

1990-04-01

In this study, the average surface regression rate of two HMX-based cast explosives, RX-35-AU and RX-35-AV, is measured to pressures above 750 MPa using a hybrid closed bomb-strand burner. The hybrid design allows the simultaneous measurement of pressure and regression rate over a large range of pressures in each experiment. Nitroglycerin/Triacetin (75/25) and polyethylene glycol (PEG) are used as the energetic plasticizer and polymeric binder, respectively, in both formulations. The HMX solids loading in each formulation is 50 wt %, consisting of a narrow particle size distribution of 6--8 {mu}m for RX-35-AU and 150--177 {mu}m for RX-35-AV. Of special interestmore » are the regression rate and burning mechanism as a function of the initial particle size distribution and the mechanical properties fo the cast explosives. In general, the regression rate for the larger particle size formulation, RX-35-AV, is two to three times faster compared to that for RX-35-AU. Up to 750 MPa and independent of the initial confinement pressure, RX-35-AU exhibits a planar burning mechanism with the regression rate obeying the classical aP{sup n} formalism. For RX-35-AV, however, the burning behavior is erratic for samples ignited at 200 MPa confinement pressure. At confinement pressures above 400 MPa, the regression exhibits more of a planar burning mechanism. The unstable combustion behavior for RX-35-AV at lower confinement pressures is related to several mechanisms: (1) an abrupt increase in surface area due to particle fracture and subsequent translation and rotation, resulting in debonding and creating porosity, (2) thixotropic'' separation of the binder and nitramine, causing the significantly greater fracture damage to the nitramine during the loading cycle, (3) microscopic damage to the nitramine crystals that increase its intrinsic burning rate. 12 refs., 8 figs., 2 tabs.« less

Measuring short-term post-fire forest recovery across a burn severity gradient in a mixed pine-oak forest using multi-sensor remote sensing techniques

DOE PAGES

Meng, Ran; Wu, Jin; Zhao, Feng; ...

2018-06-01

Understanding post-fire forest recovery is pivotal to the study of forest dynamics and global carbon cycle. Field-based studies indicated a convex response of forest recovery rate to burn severity at the individual tree level, related with fire-induced tree mortality; however, these findings were constrained in spatial/temporal extents, while not detectable by traditional optical remote sensing studies, largely attributing to the contaminated effect from understory recovery. For this work, we examined whether the combined use of multi-sensor remote sensing techniques (i.e., 1m simultaneous airborne imaging spectroscopy and LiDAR and 2m satellite multi-spectral imagery) to separate canopy recovery from understory recovery wouldmore » enable to quantify post-fire forest recovery rate spanning a large gradient in burn severity over large-scales. Our study was conducted in a mixed pine-oak forest in Long Island, NY, three years after a top-killing fire. Our studies remotely detected an initial increase and then decline of forest recovery rate to burn severity across the burned area, with a maximum canopy area-based recovery rate of 10% per year at moderate forest burn severity class. More intriguingly, such remotely detected convex relationships also held at species level, with pine trees being more resilient to high burn severity and having a higher maximum recovery rate (12% per year) than oak trees (4% per year). These results are one of the first quantitative evidences showing the effects of fire adaptive strategies on post-fire forest recovery, derived from relatively large spatial-temporal domains. Our study thus provides the methodological advance to link multi-sensor remote sensing techniques to monitor forest dynamics in a spatially explicit manner over large-scales, with important implications for fire-related forest management, and for constraining/benchmarking fire effect schemes in ecological process models.« less

Measuring short-term post-fire forest recovery across a burn severity gradient in a mixed pine-oak forest using multi-sensor remote sensing techniques

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meng, Ran; Wu, Jin; Zhao, Feng

Understanding post-fire forest recovery is pivotal to the study of forest dynamics and global carbon cycle. Field-based studies indicated a convex response of forest recovery rate to burn severity at the individual tree level, related with fire-induced tree mortality; however, these findings were constrained in spatial/temporal extents, while not detectable by traditional optical remote sensing studies, largely attributing to the contaminated effect from understory recovery. For this work, we examined whether the combined use of multi-sensor remote sensing techniques (i.e., 1m simultaneous airborne imaging spectroscopy and LiDAR and 2m satellite multi-spectral imagery) to separate canopy recovery from understory recovery wouldmore » enable to quantify post-fire forest recovery rate spanning a large gradient in burn severity over large-scales. Our study was conducted in a mixed pine-oak forest in Long Island, NY, three years after a top-killing fire. Our studies remotely detected an initial increase and then decline of forest recovery rate to burn severity across the burned area, with a maximum canopy area-based recovery rate of 10% per year at moderate forest burn severity class. More intriguingly, such remotely detected convex relationships also held at species level, with pine trees being more resilient to high burn severity and having a higher maximum recovery rate (12% per year) than oak trees (4% per year). These results are one of the first quantitative evidences showing the effects of fire adaptive strategies on post-fire forest recovery, derived from relatively large spatial-temporal domains. Our study thus provides the methodological advance to link multi-sensor remote sensing techniques to monitor forest dynamics in a spatially explicit manner over large-scales, with important implications for fire-related forest management, and for constraining/benchmarking fire effect schemes in ecological process models.« less

Development of advanced diagnostics for characterization of burning droplets in microgravity

NASA Technical Reports Server (NTRS)

Sankar, Subramanian; Buermann, Dale H.; Bachalo, William D.

1995-01-01

Diagnostic techniques currently used for microgravity research are generally not as advanced as those used in earth based gravity experiments. Diagnostic techniques for measuring the instantaneous radial temperature profile (or temperature gradients) within the burning droplet do not exist. Over the past few years, Aerometrics has been researching and developing a rainbow thermometric technique for measuring the droplet temperatures of burning droplets. This technique has recently been integrated with the phase Doppler interferometric technique to yield a diagnostic instrument that can be used to simultaneously measure the size, velocity, and temperature of burning droplets in complex spray flames. Also, the rainbow thermometric technique has been recently integrated with a point-diffraction interferometric technique for measuring the instantaneous gas phase temperature field surrounding a burning droplet. These research programs, apart from being very successful, have also helped us identify other innovative techniques for the characterization of burning droplets. For example, new techniques have been identified for measuring the instantaneous regression rate of burning droplets. Also, there is the possibility of extracting the instantaneous radial temperature distribution or the temperature gradients within a droplet during transient heating. What is important is that these diagnostic techniques have the potential for making use of inexpensive, light-weight, and rugged devices such as diode lasers and linear CCD arrays. As a result, they can be easily packaged for incorporation into microgravity drop-test and flight-test facilities. Furthermore, with the use of linear CCD arrays, data rates as high as 10-100 kHz can be easily achieved. This data rate is orders of magnitude higher than what is currently achievable. In this research and development program, a compact and rugged diagnostic system will be developed that can be used to measure instantaneous fuel droplet diameter, droplet regression rate, and the droplet internal temperature profiles or gradients at very high data rates in microgravity experiments.

Solid Propellant Test Motor Scaling

DTIC Science & Technology

2001-09-01

50 Figure 40. Comparison of Measured and Calculated Strand and Small Motor Burning Rates for Fundamental Studies of HTPB /AP Smokeless...Propellants...................................... 51 Figure 41. Agreement Between 2x4 Motor and Strand Burning Rate Data for Non-aluminized HTPB /AP...58 Figure 51. Comparison Between Results Obtained with Ultrasonic Method and Standard

46 CFR 114.600 - Incorporation by reference.

Code of Federal Regulations, 2011 CFR

2011-10-01

... supplement—Safety Glazing Materials For Glazing Motor Vehicles Operating on Land Highways 116.1030 American... Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position... Burning Characteristics of Building Materials 116.405; 116.422; 116.423 ASTM E 648-97, Standard Test...

Burning of solids in oxygen-rich environments in normal and reduced gravity. [combustion of cellulose acetates

NASA Technical Reports Server (NTRS)

Andracchio, C. R.; Cochran, T. H.

1974-01-01

An experimental program was conducted to investigate the combustion characteristics of solids burning in a weightless environment. The combustion characteristics of thin cellulose acetate material were obtained from specimens burned in supercritical as well as in low pressure oxygen atmospheres. Flame spread rates were measured and found to depend on material thickness and pressure in both normal gravity (1-g) and reduced gravity (0-g). A gravity effect on the burning process was also observed; the ratio of 1-g to 0-g flame spread rate becomes larger with increasing material thickness. Qualitative results on the combustion characteristics of metal screens (stainless steel, Inconel, copper, and aluminum) burning in supercritical oxygen and normal gravity are also presented. Stainless steel (300 sq mesh) was successfully ignited in reduced gravity; no apparent difference in the flame spread pattern was observed between 1-g and 0-g.

Regional changes in charcoal-burning suicide rates in East/Southeast Asia from 1995 to 2011: a time trend analysis.

PubMed

Chang, Shu-Sen; Chen, Ying-Yeh; Yip, Paul S F; Lee, Won Jin; Hagihara, Akihito; Gunnell, David

2014-04-01

Suicides by carbon monoxide poisoning resulting from burning barbecue charcoal reached epidemic levels in Hong Kong and Taiwan within 5 y of the first reported cases in the early 2000s. The objectives of this analysis were to investigate (i) time trends and regional patterns of charcoal-burning suicide throughout East/Southeast Asia during the time period 1995-2011 and (ii) whether any rises in use of this method were associated with increases in overall suicide rates. Sex- and age-specific trends over time were also examined to identify the demographic groups showing the greatest increases in charcoal-burning suicide rates across different countries. We used data on suicides by gases other than domestic gas for Hong Kong, Japan, the Republic of Korea, Taiwan, and Singapore in the years 1995/1996-2011. Similar data for Malaysia, the Philippines, and Thailand were also extracted but were incomplete. Graphical and joinpoint regression analyses were used to examine time trends in suicide, and negative binomial regression analysis to study sex- and age-specific patterns. In 1995/1996, charcoal-burning suicides accounted for <1% of all suicides in all study countries, except in Japan (5%), but they increased to account for 13%, 24%, 10%, 7%, and 5% of all suicides in Hong Kong, Taiwan, Japan, the Republic of Korea, and Singapore, respectively, in 2011. Rises were first seen in Hong Kong after 1998 (95% CI 1997-1999), followed by Singapore in 1999 (95% CI 1998-2001), Taiwan in 2000 (95% CI 1999-2001), Japan in 2002 (95% CI 1999-2003), and the Republic of Korea in 2007 (95% CI 2006-2008). No marked increases were seen in Malaysia, the Philippines, or Thailand. There was some evidence that charcoal-burning suicides were associated with an increase in overall suicide rates in Hong Kong, Taiwan, and Japan (for females), but not in Japan (for males), the Republic of Korea, and Singapore. Rates of change in charcoal-burning suicide rate did not differ by sex/age group in Taiwan and Hong Kong but appeared to be greatest in people aged 15-24 y in Japan and people aged 25-64 y in the Republic of Korea. The lack of specific codes for charcoal-burning suicide in the International Classification of Diseases and variations in coding practice in different countries are potential limitations of this study. Charcoal-burning suicides increased markedly in some East/Southeast Asian countries (Hong Kong, Taiwan, Japan, the Republic of Korea, and Singapore) in the first decade of the 21st century, but such rises were not experienced by all countries in the region. In countries with a rise in charcoal-burning suicide rates, the timing, scale, and sex/age pattern of increases varied by country. Factors underlying these variations require further investigation, but may include differences in culture or in media portrayals of the method. Please see later in the article for the Editors' Summary.

Impact of Early Inpatient Rehabilitation on Adult Burn Survivors' Functional Outcomes and Resource Utilization.

PubMed

Gomez, Manuel; Tushinski, Morris; Jeschke, Marc G

On July 2012, a rehabilitation hospital merged with a trauma center where the regional burn center is located. That rehabilitation center provides the only burn rehabilitation program in our region. The objective of this study was to determine if earlier initiation of inpatient rehabilitation after merger had an effect on burn survivors' functional outcomes and resource utilization. A retrospective review of electronic data of burn survivors' functional outcomes (functional independence measure [FIM] ratings on admission, at discharge, and percent change), and resource utilization (waiting time for rehab, burn center length of stay [LOS], rehab LOS, physiotherapy and occupational therapy rehabilitation workload [RehabWorkload], and discharge destination) was undertaken. Adult burn survivors who required inpatient rehabilitation and were transferred from the burn center to the inpatient rehabilitation service before the merger (July 2010-June 2012) were compared with those transferred after the merger (July 2012-June 2014). One hundred thirty-eight burn survivors were transferred from the burn center to the inpatient rehabilitation service during the study period. Sixty (43.5%) were transferred before and 78 (56.5%) were transferred after the merger. There were 97 (70.3%) men and 41 (29.7%) women with a mean age of 47.9 ± 17.9 years. TBSA burn was 24.2 ± 16.9%, and full thickness burn was 13.1 ± 16.4%. The etiology of these burns were flame (72.5%), scald (19.6%), electrical (5.1%), chemical (2.2%), and contact (0.7%). Patients in both groups had similar age, inhalation injury, TBSA, full thickness burn, FIM ratings, RehabWorkload, and burn etiology. Patients transferred before the merger had significantly more chemical burns (5% vs 0%, P = .046), and more work-related burns (26.7% vs 7.7%, P = .004). Patients transferred after the merger had significantly shorter burn center LOS (28.5 ± 20.9 days vs 38.8 ± 34.2 days, P = .043), and shorter waiting time for rehab (0.7 ± 1.1 days vs 1.5 ± 2.3 days, P = .010) than patients transferred before the merger. Early initiation of inpatient rehabilitation, after the burn center and the inpatient rehabilitation service were located in the same hospital, improved burn survivors' resource utilization.

Childhood burns in Sulaimaniyah province, Iraqi Kurdistan: a prospective study of admissions and outpatients.

PubMed

Othman, Nasih; Kendrick, Denise; Al-Windi, Ahmad

2015-03-01

While it is globally observed that young children are at a higher risk of burn injuries, little is known about childhood burns in Iraqi Kurdistan. This study was undertaken to describe the epidemiology of burns amongst pre-school children in this region. A prospective study was undertaken from November 2007 to November 2008 involving all children aged 0-5 years attending the burns centre in Sulaimaniyah province for a new burn injury whether treated as an outpatient or admitted to hospital. 1,122 children attended the burns centre of whom 944 (84%) were interviewed (male 53%, female 47%). Mean age was 1.9 years with children aged 1 year comprising 32% and those aged 2 years comprising 21% of the sample. The incidence of burns was 1044/100,000 person-years (1030 in females and 1057 in males). Mechanisms of injury included scalds (80%), contact burns (12%) flames (6%) and other mechanisms (2%). Almost 97% of burns occurred at home including 43% in the kitchen. Winter was the commonest season (36%) followed by autumn (24%). There were 3 peak times of injury during the day corresponding to meal times. The majority of burns were caused by hot water (44%) and tea (20%) and the most common equipment/products responsible were tea utensils (41%). There were 237 admissions with an admission rate of 95 per 100,000 person-years. Scald injuries accounted for most admissions (84%). Median total body surface area affected by the burn or scald (TBSA) was 11% and median hospital stay was 7 days. In-hospital mortality was 8%. Mortality rate was 4% when TBSA was ≤25%, and 100% when TBSA was over 50%. Burn incidence is high in young children especially those aged 1-2 years. Preventive interventions targeted at families with young children & focusing on home safety measures could be effective in reducing childhood burns. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

[The Nutrition Care of Severe Burn Patients].

PubMed

Hsieh, Yu-Hsiu

2016-02-01

In addition to recent advances in burn patient care techniques such as maintaining warm circumambient temperature, the early excision of wounds, and the use of closed dressing, providing nutrition support through early feeding has proven instrumental in greatly increasing the survival rate of burn patients. Severe burns complicated by many factors initiate tremendous physiological stress that leads to postburn hypermetabolism that includes enhanced tissue catabolism, the loss of muscle mass, and decreases in the body's reservoirs of protein and energy. These problems have become the focus of burn therapy. Treating severe burns aims not only to enhance survival rates but also to restore normal bodily functions as completely as possible. Recent research evaluating the application of anabolic agents and immune-enhance formula for severe burns therapy has generated significant controversy. Inadequate caloric intake is one of the main differences among the related studies, with the effect of many special nutrients such as bran acid amides not taken into consideration. Therefore, considering the sufficiency of caloric and protein intake is critical in assessing effectiveness. Only after patients receive adequate calories and protein may the effect of special nutrients such as glutamine and supplements be evaluated effectively.

Investigation of critical burning of fuel droplets

NASA Technical Reports Server (NTRS)

Allison, C. B.; Canada, G. S.; Faeth, G. M.

1972-01-01

Measurements were made on the burning of liquid hydrazine, MMH, and UDMH in a combustion gas environment. The experimental range of these tests involved gas temperatures of 1660-2530 K, oxygen concentrations of 0-42% by mass and droplet diameters (employing both droplets and porous spheres) of 0.11-1.91 cm. at atmospheric pressure. A simplified hybrid combustion theory was developed which was found to correlate the present results as well as the experimental measurements of other investigators. Measurements were also made of the monopropellant strand burning rates and liquid surface temperatures of a number of nitrate ester fuels and hydrazine at elevated pressures. The temperature measurements for the nitrate esters were found to be in good agreement with a theoretical model which allowed for gas solubility in the liquid phase at high pressures. Experimental results were also obtained on the burning rates and liquid surface temperatures of a number of paraffin and alcohol fuels burning in air pressures up to 72 atm. For these tests, the fuels were burned from porous spheres in a natural convection environment. Initial findings on a pressurized flat flame burner are also described as well as the design of an oscillatory combustion apparatus to test the response of burning liquid fuels.

Initial Satellite Formation Flight Results from the Magnetospheric Multiscale Mission

NASA Technical Reports Server (NTRS)

Williams, Trevor; Ottenstein, Neil; Palmer, Eric; Farahmand, Mitra

2016-01-01

This paper will describe the results that have been obtained to date concerning MMS formation flying. The MMS spacecraft spin at a rate of 3.1 RPM, with spin axis roughly aligned with Ecliptic North. Several booms are used to deploy instruments: two 5 m magnetometer booms in the spin plane, two rigid booms of length 12.5 m along the positive and negative spin axes, and four flexible wire booms of length 60 m in the spin plane. Minimizing flexible motion of the wire booms requires that reorientation of the spacecraft spin axis be kept to a minimum: this is limited to attitude maneuvers to counteract the effects of gravity-gradient and apparent solar motion. Orbital maneuvers must therefore be carried out in essentially the nominal science attitude. These burns make use of a set of monopropellant hydrazine thrusters: two (of thrust 4.5 N) along the spin axis in each direction, and eight (of thrust 18 N) in the spin plane; the latter are pulsed at the spin rate to produce a net delta-v. An on-board accelerometer-based controller is used to accurately generate a commanded delta-v. Navigation makes use of a weak-signal GPS-based system: this allows signals to be received even when MMS is flying above the GPS orbits, producing a highly accurate determination of the four MMS orbits. This data is downlinked to the MMS Mission Operations Center (MOC) and used by the MOC Flight Dynamics Operations Area (FDOA) for maneuver design. These commands are then uplinked to the spacecraft and executed autonomously using the controller, with the ground monitoring the burns in real time.

5 CFR 9701.324 - Treatment of employees whose rate of basic pay does not fall below the minimum rate of their band.

Code of Federal Regulations, 2013 CFR

2013-01-01

... basic pay does not fall below the minimum rate of their band. 9701.324 Section 9701.324 Administrative... basic pay does not fall below the minimum rate of their band. An employee who does not receive a pay... fall below the minimum rate of his or her band as a result of that rating will receive such an increase...

5 CFR 9701.324 - Treatment of employees whose rate of basic pay does not fall below the minimum rate of their band.

Code of Federal Regulations, 2011 CFR

2011-01-01

... basic pay does not fall below the minimum rate of their band. 9701.324 Section 9701.324 Administrative... basic pay does not fall below the minimum rate of their band. An employee who does not receive a pay... fall below the minimum rate of his or her band as a result of that rating will receive such an increase...

5 CFR 9701.324 - Treatment of employees whose rate of basic pay does not fall below the minimum rate of their band.

Code of Federal Regulations, 2012 CFR

2012-01-01

... basic pay does not fall below the minimum rate of their band. 9701.324 Section 9701.324 Administrative... basic pay does not fall below the minimum rate of their band. An employee who does not receive a pay... fall below the minimum rate of his or her band as a result of that rating will receive such an increase...

5 CFR 9701.324 - Treatment of employees whose rate of basic pay does not fall below the minimum rate of their band.

Code of Federal Regulations, 2014 CFR

2014-01-01

... basic pay does not fall below the minimum rate of their band. 9701.324 Section 9701.324 Administrative... basic pay does not fall below the minimum rate of their band. An employee who does not receive a pay... fall below the minimum rate of his or her band as a result of that rating will receive such an increase...

Reaction rate for carbon burning in massive stars

NASA Astrophysics Data System (ADS)

Jiang, C. L.; Santiago-Gonzalez, D.; Almaraz-Calderon, S.; Rehm, K. E.; Back, B. B.; Auranen, K.; Avila, M. L.; Ayangeakaa, A. D.; Bottoni, S.; Carpenter, M. P.; Dickerson, C.; DiGiovine, B.; Greene, J. P.; Hoffman, C. R.; Janssens, R. V. F.; Kay, B. P.; Kuvin, S. A.; Lauritsen, T.; Pardo, R. C.; Sethi, J.; Seweryniak, D.; Talwar, R.; Ugalde, C.; Zhu, S.; Bourgin, D.; Courtin, S.; Haas, F.; Heine, M.; Fruet, G.; Montanari, D.; Jenkins, D. G.; Morris, L.; Lefebvre-Schuhl, A.; Alcorta, M.; Fang, X.; Tang, X. D.; Bucher, B.; Deibel, C. M.; Marley, S. T.

2018-01-01

Carbon burning is a critical phase for nucleosynthesis in massive stars. The conditions for igniting this burning stage, and the subsequent isotope composition of the resulting ashes, depend strongly on the reaction rate for 12C+12C fusion at very low energies. Results for the cross sections for this reaction are influenced by various backgrounds encountered in measurements at such energies. In this paper, we report on a new measurement of 12C+12C fusion cross sections where these backgrounds have been minimized. It is found that the astrophysical S factor exhibits a maximum around Ecm=3.5 -4.0 MeV, which leads to a reduction of the previously predicted astrophysical reaction rate.

Propranolol and Oxandrolone Therapy Accelerated Muscle Recovery in Burned Children.

PubMed

Chao, Tony; Porter, Craig; Herndon, David N; Siopi, Aikaterina; Ideker, Henry; Mlcak, Ronald P; Sidossis, Labros S; Suman, Oscar E

2018-03-01

Severe burns result in prolonged hypermetabolism and skeletal muscle catabolism. Rehabilitative exercise training (RET) programs improved muscle mass and strength in severely burned children. The combination of RET with β-blockade or testosterone analogs showed improved exercise-induced benefits on body composition and muscle function. However, the effect of RET combined with multiple drug therapy on muscle mass, strength, cardiorespiratory fitness, and protein turnover are unknown. In this placebo-controlled randomized trial, we hypothesize that RET combined with oxandrolone and propranolol (Oxprop) will improve muscle mass and function and protein turnover in severely burned children compared with burned children undergoing the same RET with a placebo. We studied 42 severely burned children (7-17 yr) with severe burns over 30% of the total body surface area. Patients were randomized to placebo (22 control) or to Oxprop (20) and began drug administration within 96 h of admission. All patients began RET at hospital discharge as part of their standardized care. Muscle strength (N·m), power (W), V˙O2peak, body composition, and protein fractional synthetic rate and fractional breakdown rate were measured pre-RET (PRE) and post-RET (POST). Muscle strength and power, lean body mass, and V˙O2peak increased with RET in both groups (P < 0.01). The increase in strength and power was significantly greater in Oxprop versus control (P < 0.01), and strength and power was greater in Oxprop over control POST (P < 0.05). Fractional synthetic rate was significantly higher in Oxprop than control POST (P < 0.01), resulting in improved protein net balance POST (P < 0.05). Rehabilitative exercise training improves body composition, muscle function, and cardiorespiratory fitness in children recovering from severe burns. Oxprop therapy augments RET-mediated improvements in muscle strength, power, and protein turnover.

[Etiological analysis of subambient temperature burn in 351 cases of Hefei area].

PubMed

Shi, Jie; Qi, Weiwei; Xu, Qinglian; Zhou, Shunying; Wang, Guobao

2010-06-01

To study the preventive measure of the subambient temperature burn by analysing the pathogenesis feature. The clinical data were analysed from 351 cases of subambient temperature burn between February 2004 and February 2009, including age, sex, burn season, burn factors, burn position, burn area, burn degree, treatment way, and wound healing. Subambient temperature burn occurred in every age stage. The susceptible age stages included infant, children, and the elderly. Female patients were more than male patients. The common burn reasons were hot-water bottle burn, honey warm keeper burn, and heating device burn. The peak season was winter. Lower limb was the most common site of the subambient temperature burn. The deep II degree to III degree were the most common level, and the burn area was always small, often < or = 1% of total body surface area. Most of patients were treated with changing dressings at clinic and few patients needed hospitalization. Though the surface of wound could heal finally, and the wound healed well with no obvious scar in patients who received operation. Subambient temperature burn is the frequently encountered disease in winter. Use of the warming articles should be cautious, at the same time safety awareness should be strengthened so as to decrease the incidence rate of subambient temperature burn and the injury degree.

Sibling experiences after a major childhood burn injury.

PubMed

Lehna, Carlee

2010-01-01

The purpose of this research project was to understand, primarily from the sibling perspective, the effect of a child's major burn injury on his or her sibling. A mixed method qualitative dominant design was implemented using the life story method for the qualitative portion. Additionally, the Sibling Relationship Questionnaire -Revised (SRQ-R) was used as a structured interview guide and for calculating scoring data to explore sibling relationship factors of warmth/closeness, rivalry, conflict, and relative status/power. Participants from 22 family cases (one or multiple family members) and 40 individuals were interviewed. To capture impact on the family over time, interviews began a minimum of two years post-burn. The central thematic pattern for the sibling relationship in families having a child with a major burn injury was that of normalization. Two components of normalization were described: areas of normalization and the process of adjustment. Areas of normalization were found in play and other activities, in school and work, and in family relations with siblings. The process of adjustment was varied and often gradual, involved school and work re-entry, and in some instances, seemed to change life perspective. Clinical implications in providing family-centered care can focus on promoting normalization by assessing and supporting siblings who may only be occasionally seen in the hospital or clinic.

Satisfaction with life after burn: A Burn Model System National Database Study.

PubMed

Goverman, J; Mathews, K; Nadler, D; Henderson, E; McMullen, K; Herndon, D; Meyer, W; Fauerbach, J A; Wiechman, S; Carrougher, G; Ryan, C M; Schneider, J C

2016-08-01

While mortality rates after burn are low, physical and psychosocial impairments are common. Clinical research is focusing on reducing morbidity and optimizing quality of life. This study examines self-reported Satisfaction With Life Scale scores in a longitudinal, multicenter cohort of survivors of major burns. Risk factors associated with Satisfaction With Life Scale scores are identified. Data from the National Institute on Disability, Independent Living, and Rehabilitation Research (NIDILRR) Burn Model System (BMS) database for burn survivors greater than 9 years of age, from 1994 to 2014, were analyzed. Demographic and medical data were collected on each subject. The primary outcome measures were the individual items and total Satisfaction With Life Scale (SWLS) scores at time of hospital discharge (pre-burn recall period) and 6, 12, and 24 months after burn. The SWLS is a validated 5-item instrument with items rated on a 1-7 Likert scale. The differences in scores over time were determined and scores for burn survivors were also compared to a non-burn, healthy population. Step-wise regression analysis was performed to determine predictors of SWLS scores at different time intervals. The SWLS was completed at time of discharge (1129 patients), 6 months after burn (1231 patients), 12 months after burn (1123 patients), and 24 months after burn (959 patients). There were no statistically significant differences between these groups in terms of medical or injury demographics. The majority of the population was Caucasian (62.9%) and male (72.6%), with a mean TBSA burned of 22.3%. Mean total SWLS scores for burn survivors were unchanged and significantly below that of a non-burn population at all examined time points after burn. Although the mean SWLS score was unchanged over time, a large number of subjects demonstrated improvement or decrement of at least one SWLS category. Gender, TBSA burned, LOS, and school status were associated with SWLS scores at 6 months; scores at 12 months were associated with LOS, school status, and amputation; scores at 24 months were associated with LOS, school status, and drug abuse. In this large, longitudinal, multicenter cohort of burn survivors, satisfaction with life after burn was consistently lower than that of non-burn norms. Furthermore mean SWLS scores did not improve over the two-year follow-up period. This study demonstrates the need for continued efforts to improve patient-centered long term satisfaction with life after burn. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

[Influence of three-level collaboration network of pediatric burns treatment in Anhui province on treatment effects of burn children].

PubMed

Xia, Z G; Zhou, X L; Kong, W C; Li, X Z; Song, J H; Fang, L S; Hu, D L; Cai, C; Tang, Y Z; Yu, Y X; Wang, C H; Xu, Q L

2018-03-20

Objective: To explore the influence of three-level collaboration network of pediatric burns in Anhui province on treatment effects of burn children. Methods: The data of medical records of pediatric burn children transferred from Lu'an People's Hospital and Fuyang People's Hospital to the First Affiliated Hospital of Anhui Medical University from January 2014 to December 2015 and January 2016 to September 2017 (before and after establishing three-level collaboration network of pediatric burns treatment) were analyzed: percentage of transferred burn children to hospitalized burn children in corresponding period, gender, age, burn degree, treatment method, treatment result, occurrence and treatment result of shock, and operative and non-operative treatment time and cost. Rehabilitation result of burn children transferred back to local hospitals in 2016 and 2017. Data were processed with t test, chi-square test, Mann-Whitney U test, and Fisher's exact test. Results: (1) Percentage of burn children transferred from January 2014 to December 2015 was 34.3% (291/848) of the total number of hospitalized burn children in the same period of time, which was close to 30.4% (210/691) of burn children transferred from January 2016 to September 2017 ( χ (2)=2.672, P >0.05). (2) Gender, age, burn degree, and treatment method of burn children transferred from the two periods of time were close ( χ (2)=3.382, Z =-1.917, -1.911, χ (2)=3.133, P >0.05). (3) Cure rates of children with mild, moderate, and severe burns transferred from January 2016 to September 2017 were significantly higher than those of burn children transferred from January 2014 to December 2015 ( χ (2)=11.777, 6.948, 4.310, P <0.05). Cure rates of children with extremely severe burns transferred from the two periods of time were close ( χ (2)=1.181, P >0.05). (4) Children with mild and moderate burns transferred from the two periods of time were with no shock. The incidence of shock of children with severe burns transferred from January 2014 to December 2015 was 6.0% (4/67), and 3 children among them were cured. The incidence of shock of children with severe burns transferred from January 2016 to September 2017 was 3.9% (2/51), and both children were cured. The incidences and cures of shock of children with severe burns transferred from the two periods of time were close ( χ (2)=0.006, P >0.05). Incidence of shock of children with extremely severe burns transferred from January 2014 to December 2015 was 57.1% (32/56), significantly higher than that of burn children transferred from January 2016 to September 2017 [34.5% (10/29), χ (2)=3.925, P <0.05]. Shock of 25 children with extremely severe burns transferred from January 2014 to December 2015 were cured, and shock of 9 children with extremely severe burns transferred from January 2016 to September 2017 were cured. The cures of shock of children with extremely severe burns transferred from the two periods of time were close ( χ (2)=0.139, P >0.05). (5) Time of operative treatment of children with moderate, severe, and extremely severe burns transferred from January 2014 to December 2015 was obviously longer than that of burn children transferred from January 2016 to September 2017 ( t =2.335, 2.065, 2.310, P <0.05). Time of operative treatment of children with mild burns transferred from the two periods of time was close ( Z =-0.417, P >0.05). Costs of operative treatment of children with moderate and severe burns transferred from January 2014 to December 2015 were significantly more than those of burn children transferred from January 2016 to September 2017 ( Z =-3.324, t =2.167, P <0.05). Costs of operative treatment of children with mild and extremely severe burns transferred from the two periods of time were close ( t =0.627, 0.808, P >0.05). (6)Time of non-operative treatment of children with mild, moderate, and severe burns transferred from January 2014 to December 2015 was obviously longer than that of burn children transferred from January 2016 to September 2017 ( t =2.335, Z =-2.095, t =2.152, P <0.05). Time of non-operative treatment of children with extremely severe burns transferred from the two periods of time was close ( t =0.450, P >0.05). Costs of non-operative treatment of children with moderate and severe burns transferred from January 2014 to December 2015 were obviously higher than those of burn children transferred from January 2016 to September 2017 ( Z =-2.164, t =2.040, P <0.05). Costs of non-operative treatment of children with mild and extremely severe burns transferred from the two periods of time were close ( t =0.146, 1.235, P >0.05). (7) Sixty-seven burn children transferred from January 2016 to September 2017 were transferred back to local hospitals for rehabilitation under the guidance of experts of the First Affiliated Hospital of Anhui Medical University, with 25 patients in 2016 and 42 patients in 2017. Effective rehabilitation rates of burn children transferred back to local hospitals for rehabilitation in 2016 and 2017 were both 100%. Conclusions: The three-level collaboration network of pediatric burns treatment in Anhui province can effectively increase cure rate of children with mild, moderate, and severe burns, reduce incidence of shock of children with extremely severe burns, shorten time of operative treatment of burn children with moderate, severe, and extremely severe burns, and time of non-operative treatment of children with mild, moderate, and severe burns, reduce treatment costs of children with moderate and severe burns, and improve rehabilitation effectiveness of children transferred from Lu'an People's Hospital and Fuyang People's Hospital to the the First Affiliated Hospital of Anhui Medical University.

Nitrogen oxides from burning forest fuels examined by thermogravimetry and evolved gas analysis

Treesearch

H.B. Clements; Charles K. McMahon

1980-01-01

Abstract. Twelve forest fuels that varied widely in nitrogen content were burned in a thermogravimetric system, and nitrogen oxide production was analyzed by chemiluminescence. The effects of fuel nitrogen concentration, available oxygen, flow rate, and heating rate on nitrogen oxide production were examined.Results show that fuel nitrogen is an...

EFFECTS OF BURN RATE, WOOD SPECIES, MOISTURE CONTENT AND WEIGHT OF WOOD LOADED ON WOODSTOVE EMISSIONS

EPA Science Inventory

The report gives results of tests of four woodstove operating parameters (burn rate, wood moisture, wood load, and wood species) at two levels each using a half factorial experimental test design to determine statistically significant effects on the emission components CO, CO2, p...

How Does the Freezer Burn Our Food?

ERIC Educational Resources Information Center

Schmidt, Shelly J.; Lee, Joo Won

2009-01-01

Freezer burn is a common problem that significantly affects the color, texture, and flavor of frozen foods. Food science students should be able to clearly explain the causes and consequences of freezer burn. However, it is difficult to find a modern, detailed, accurate, yet concise, explanation of the mechanism and factors influencing the rate of…

Refinement of Propellant Strand Burning Method to Suit Aluminised Composite Rocket Propellant

DTIC Science & Technology

2014-12-01

from discrete burn rates at each pressure. Strands are ignited with a nickel- chromium (nichrome) wire with burn time measured via timing wires which...Application of Paint Inhibitor 8.5.1 Switch on the fume hood and prepare a 70% dilution of inhibitor paint as per instructions of document 3.5

A Pebble-Bed Breed-and-Burn Reactor

DOE Office of Scientific and Technical Information (OSTI.GOV)

Greenspan, Ehud

2016-03-31

The primary objective of this project is to use three-dimensional fuel shuffling in order to reduce the minimum peak radiation damage of ~550 dpa present Breed-and-Burn (B&B) fast nuclear reactor cores designs (they feature 2-D fuel shuffling) call for to as close as possible to the presently accepted value of 200 dpa thereby enabling earlier commercialization of B&B reactors which could make substantial contribution to energy sustainability and economic stability without need for fuel recycling. Another objective is increasing the average discharge burnup for the same peak discharge burnup thereby (1) increasing the fuel utilization of 2-D shuffled B&B reactorsmore » and (2) reducing the reprocessing capacity required to support a given capacity of FRs that are to recycle fuel.« less

Experimental investigation of burning rates of pure ethanol and ethanol blended fuels

DOE Office of Scientific and Technical Information (OSTI.GOV)

Parag, Shintre; Raghavan, Vasudevan

2009-05-15

A fundamental experimental study to determine the burning rates of ethanol and ethanol-blended fossil fuels is presented. Pure liquid ethanol or its blends with liquid fossil fuels such as gasoline or diesel, has been transpired to the surface a porous sphere using an infusion pump. Burning of the fuel takes place on the surface of the porous sphere, which is placed in an air stream blowing upwards with a uniform velocity at atmospheric pressure and temperature under normal gravity conditions. At low air velocities, when ignited, a flame envelopes the sphere. For each sphere size, air stream velocity and fuelmore » type, the fuel feed rate will vary and the same is recorded as the burning rate for that configuration. The flame stand-off distances from the sphere surface are measured by post-processing the digital image of the flame photograph using suitable imaging software. The transition velocity at which the flame moves and establishes itself at the wake region of the sphere has been determined for different diameters and fuel types. Correlations of these parameters are also presented. (author)« less

Solid-propellant rocket motor internal ballistic performance variation analysis, phase 2

NASA Technical Reports Server (NTRS)

Sforzini, R. H.; Foster, W. A., Jr.

1976-01-01

The Monte Carlo method was used to investigate thrust imbalance and its first time derivative throughtout the burning time of pairs of solid rocket motors firing in parallel. Results obtained compare favorably with Titan 3 C flight performance data. Statistical correlations of the thrust imbalance at various times with corresponding nominal trace slopes suggest several alternative methods of predicting thrust imbalance. The effect of circular-perforated grain deformation on internal ballistics is discussed, and a modified design analysis computer program which permits such an evaluation is presented. Comparisons with SRM firings indicate that grain deformation may account for a portion of the so-called scale factor on burning rate between large motors and strand burners or small ballistic test motors. Thermoelastic effects on burning rate are also investigated. Burning surface temperature is calculated by coupling the solid phase energy equation containing a strain rate term with a model of gas phase combustion zone using the Zeldovich-Novozhilov technique. Comparisons of solutions with and without the strain rate term indicate a small but possibly significant effect of the thermoelastic coupling.

Perceptual and Affective Responses to Sampled Capsaicin Differ by Reported Intake

PubMed Central

Nolden, Alissa A.; Hayes, John E.

2016-01-01

The present study was conducted to a) generate suprathresold dose-response functions for multiple qualities evoked by capsaicin across a wide range of concentrations, and b) revisit how intensity ratings and liking may differ as a function of self reported intake. Individuals rated eight samples of capsaicin for perceived burn and bitterness, as well as disliking/liking. Measures of reported preference for chili peppers, chili intake frequency, prior experience and personality measures were also assessed. Here, we confirm prior findings showing that burn in the laboratory differs with reported chili intake, with infrequent consumers reporting more burn. We extend these findings by exploring how capsaicin perception varies by reported liking, and measures of variety seeking. We also address the question of whether differences in burn ratings may potentially be an artifact of differential scale usage across groups due to prior experience, and not chronic desensitization, as is typically assumed. By using generalized scaling methods and recalled sensations, we conclude the differences observed here and elsewhere are not likely due to differences in how participants use rating scales. PMID:28392628

An Experimental Study on Burning Characteristics of n-Heptane/Ethanol Mixture Pool Fires in a Reduced Scaled Tunnel

NASA Astrophysics Data System (ADS)

Yozgatligil, Ahmet; Shafee, Sina

2016-11-01

Fire accidents in recent decades have drawn attention to safety issues associated with the design, construction and maintenance of tunnels. A reduced scale tunnel model constructed based on Froude scaling technique is used in the current work. Mixtures of n-heptane and ethanol are burned with ethanol volumetric fraction up to 30 percent and the longitudinal ventilation velocity varying from 0.5 to 2.5 m/s. The burning rates of the pool fires are measured using a precision load cell. The heat release rates of the fires are calculated according to oxygen calorimetry method and the temperature distributions inside the tunnel are also measured. Results of the experiments show that the ventilation velocity variation has a significant effect on the pool fire burning rate, smoke temperature and the critical ventilation velocity. With increased oxygen depletion in case of increased ethanol content of blended pool fires, the quasi-steady heat release rate values tend to increase as well as the ceiling temperatures while the combustion duration decreases.

Modeling Skin Injury from Hot Spills on Clothing.

PubMed

Log, Torgrim

2017-11-11

The present work analyzes scald burns from hot beverages, such as coffee and tea, spilled on the lap, i.e., an incident that may occur in daily life. The Pennes bioheat equation is solved numerically for small spills wetting the clothing, i.e., the fabric prevents the spilled liquid from draining away. Temperatures are analyzed in the wetted fabric and the skin layers and the resulting skin injury is calculated based on the basal layer temperature. Parameters influencing burn severity, such as clothing thickness, liquid temperature, removal of fabric and thermal effects of post scald water cooling are analyzed. The fabric cools the water some but represents a threat since the entrapped water results in a prolonged heat supply. The liquid temperature turned out to be the most important injury parameter, where liquid temperature of about 80-85 °C seems to be a limit for developing superficial partial-thickness burns in the present minimum case, i.e., where the liquid just wets the fabric. Spilling water in excess of just wetting the fabric, more severe burns will develop at lower liquid temperatures due to the prolonged heat supply. Higher liquid temperatures will nearly instantly develop more severe burns. It is demonstrated that removal of the clothing within the first seconds after the spill may significantly reduce the scalding severity. The general advice is therefore to avoid excessive heating of beverages and, if the beverage is spilled, to quickly remove the wetted clothing. Prolonged tempered water cooling is advised to improve the healing processes.

The variability of biomass burning and its influence on regional aerosol properties during the wheat harvest season in North China

NASA Astrophysics Data System (ADS)

Wang, Lili; Xin, Jinyuan; Li, Xingru; Wang, Yuesi

2015-04-01

The spatial-temporal variation of biomass burning in June during the wheat harvest season in the North China (32-41°N, 111-120°E) and its influence on the regional aerosol optical depth (AOD) and the chemical compositions of size-segregated aerosols in the urban environment were investigated to evaluate the effectiveness of the burn ban policy and the influence on regional pollution. Fire events that occurred in early and middle June accounted for approximately 89% of the events during the month, and fire points located in mid-eastern China (32.5-35.5°N, 114-120°E) comprised 71%. The occurrences exhibit oscillatory changes with a minimum in 2008 (during the Beijing Olympics) and a peak and explosive growth in 2012. Under high relative humidity and south winds, fire emissions from straw burning combined with high urban/industrial emissions to produce intensive regional haze pollution in the North Plain. The formation of secondary inorganic particles was intensified due to the interactions of smoke plumes and urban/industrial pollutants in an urban environment. Higher concentrations and percentages (79%) of sulfate, nitrate, ammonium, and organic carbon in the fine particles under high relative humidity conditions contributed to a deteriorated urban visibility. Therefore, stronger management and a comprehensive ban on wheat straw burning in June are urgently needed, especially during years when the south wind is dominant.

Clothing-related burns in New South Wales, Australia: impact of legislation on a continuing problem.

PubMed

Harvey, Lara A; Connolley, Siobhan; Harvey, John G

2015-02-01

To combat the risk of nightwear burns a mandatory standard regulating the design, flammability and labelling requirements of children's nightwear was introduced in Australia in 1987. This population-based study examined the trends, characteristics and causes of clothing-related burns to inform a review of the current standard, and to facilitate the development of targeted prevention strategies. Clothing-related burns for 1998-2013 were identified from hospitalisation data for all hospitals in NSW and detailed information regarding circumstance of injury from a burn data registry. To investigate percentage annual change (PAC) in trends negative binomial regression analysis was performed. There were 541 hospitalisations for clothing-related burns, 18% were nightwear-related and 82% were for other clothing. All clothing burns decreased by an estimated 4% per year (95% CI -6.2 to -2.1). Nightwear-related burns decreased by a significantly higher rate (PAC -7.4%; 95% CI -12.5 to -2.1) than other clothing (PAC -2.5%; 95%CI -4.7 to -0.1). Exposure to open heat source (campfire/bonfire) was the most common cause, followed by cooking. Of factors known to be associated with clothing burns, accelerant use was reported in 27% of cases, cigarettes 17%, loose skirt or dress 8%, and angle grinders in 6% of cases. Hospitalisations for clothing burns are relatively uncommon in NSW and rates, particularly of nightwear burns, have decreased over the last 15 years. Strategies for continued reduction of these injuries include increasing the scope of the current clothing standard or developing new standards to include all children's clothing and adult nightwear, and increasing community awareness of the risk associated with open heat sources, accelerant use and loose clothing. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

The Burns Registry of Australia and New Zealand: progressing the evidence base for burn care.

PubMed

Cleland, Heather; Greenwood, John E; Wood, Fiona M; Read, David J; Wong She, Richard; Maitz, Peter; Castley, Andrew; Vandervord, John G; Simcock, Jeremy; Adams, Christopher D; Gabbe, Belinda J

2016-03-21

Analysis of data from the Burns Registry of Australia and New Zealand (BRANZ) to determine the extent of variation between participating units in treatment and in specific outcomes during the first 4 years of its operation. BRANZ, an initiative of the Australian and New Zealand Burn Association, is a clinical quality registry developed in accordance with the Australian Commission on Safety and Quality in Healthcare national operating principles. Patients with burn injury who fulfil pre-defined criteria are transferred to and managed in designated burn units. There are 17 adult and paediatric units in Australia and New Zealand that manage almost all patients with significant burn injury. Twelve of these units treat adult patients. Data on 7184 adult cases were contributed by ten acute adult burn units to the registry between July 2010 and June 2014.Major outcomes: In-hospital mortality, hospital length of stay, skin grafting rates, and rates of admission to intensive care units. Considerable variations in unit profiles (including numbers of patients treated), in treatment and in outcomes were identified. Despite the highly centralised delivery of care to patients with severe or complex burn injury, and the relatively small number of specialist burn units, we found significant variation between units in clinical management and in outcomes. BRANZ data from its first 4 years of operation support its feasibility and the value of further development of the registry. Based on these results, the focus of ongoing research is to improve understanding of the reasons for variations in practice and of their effect on outcomes for patients, and to develop evidence-informed clinical guidelines for burn management in Australia and New Zealand.

Epidemiology and Outcomes of Hospitalized Burn Patients in Gaza Strip: A Descriptive Study.

PubMed

Elsous, Aymen; Ouda, Mahmoud; Mohsen, Samah; Al-Shaikh, Mohammed; Mokayad, Siham; Abo-Shaban, Nafiz; Hamad, Abed Al-Rahman

2016-01-01

Burns are serious health problems and leading causes of mortality and morbidity in the Eastern Mediterranean Region. This study aimed to overview the epidemiological profile and to present outcomes among hospitalized burn patients in AL Alamy burn center in Gaza. This was a cross-sectional retrospective study of medical records of hospitalized patients from July 2013 to June 2014. Descriptive analysis for studied variables was applied and P ≤ 0.05 considered statistically significant. One humdred eighty nime admissions, 60.8% were males and 63% were under 10 years old. Burn patients in the age range between 19-40 years represented 25.9%. Most common burn injuries were accidental (86.2%), located at home (88.9%), caused by scald (66.1%) and by fire flame (23.8%). On admission, the majority of cases presented with second degree burn (45.5%) or mixed burn (38.6%). The mean TBSA was 11.86 (SD ± 10.78) ranging from 1% to 75% whereas, the mean hospital length of stay was 11.45 (SD ± 12.60) ranging from 1 to 115 days. Total in hospital mortality rate was 2.1% and length of stay was significantly associated with TBSA (P < 0.001). Young children below 10 years seem to be at a higher risk for burn injuries. A significant improvement in burn patients care is observed and practiced and in hospital mortality rate is better compared to neighbouring countries. Preventive programs focusing on safety measures, especially for mothers working in the home, should be implemented urgently to save our children.

Efficacy of moclobemide in burning mouth syndrome: a nonrandomized, open-label study.

PubMed

Pekiner, Filiz Namdar; Gumru, Birsay; Ozbayrak, Semih

2008-01-01

To compare burning mouth syndrome (BMS) patients with age- and gender-matched controls for psychologic conditions, to analyze the effect of menstrual state on the intensity of burning, and to assess the efficacy of an antidepressant medication on the burning pain and psychologic status. Ninety-four patients with BMS and 94 matched control subjects participated in the study. Anxiety and depression were analyzed by means of the Spielberger State-Trait Anxiety Inventory and Zung Self-Rating Depression Scale, and the severity of the burning sensation was measured by means of a visual analog scale (VAS). In female BMS patients and controls, the menstrual state was noted (menstruating, menopausal, or postmenopausal). BMS patients were treated with the antidepressant moclobemide (150 mg 2 times daily) for 3 months. Thereafter, anxiety, depression, and burning pain intensity were reassessed. Patient-perceived satisfactory improvement for burning sensation was assessed using a 5-point categorical rating of change scale. BMS patients had significantly higher anxiety and depression scores than controls (P < .05). After treatment, anxiety and depression scores as well as the VAS values for burning pain decreased significantly (P < .001). Thirty-seven patients reported good to very good improvement, and 44 reported satisfactory improvement. No adverse reactions were reported. The study confirmed earlier reports that BMS patients have higher anxiety and depression levels than controls. An antidepressant medication may be effective in alleviating the burning pain, at least in the short-term.

Burning characteristics and fiber retention of graphite/resin matrix composites

NASA Technical Reports Server (NTRS)

Bowles, K. J.

1980-01-01

Graphite fiber reinforced resin matrix composites were subjected to controlled burning conditions to determine their burning characteristics and fiber retention properties. Two types of burning equipment were used. Small samples were burned with a natural gas fired torch to study the effects of fiber orientation and structural flaws such as holes and slits that were machined into the laminates. Larger laminate samples were burned in a Heat Release Rate Calorimeter. Unidirectional epoxy/graphite and polyimide/graphite composites and boron powder filled samples of each of the two composite systems were burn tested and exposed to a thermal radiation. The effects of fiber orientation, flaws, and boron filler additives to the resins were evaluated. A high char forming polyimide resin was no more effective in retaining graphite fibers than a low char forming epoxy resin when burning in air.

Fiber-Supported Droplet Combustion Experiment-2

NASA Technical Reports Server (NTRS)

Colantonio, Renato O.

1998-01-01

A major portion of the energy produced in the world today comes from the burning of liquid hydrocarbon fuels in the form of droplets. Understanding the fundamental physical processes involved in droplet combustion is not only important in energy production but also in propulsion, in the mitigation of combustion-generated pollution, and in the control of the fire hazards associated with handling liquid combustibles. Microgravity makes spherically symmetric combustion possible, allowing investigators to easily validate their droplet models without the complicating effects of gravity. The Fiber-Supported Droplet Combustion (FSDC-2) investigation was conducted in the Microgravity Glovebox facility of the shuttles' Spacelab during the reflight of the Microgravity Science Laboratory (MSL- 1R) on STS-94 in July 1997. FSDC-2 studied fundamental phenomena related to liquid fuel droplet combustion in air. Pure fuels and mixtures of fuels were burned as isolated single and duo droplets with and without forced air convection. FSDC-2 is sponsored by the NASA Lewis Research Center, whose researchers are working in cooperation with several investigators from industry and academia. The rate at which a droplet burns is important in many commercial applications. The classical theory of droplet burning assumes that, for an isolated, spherically symmetric, single-fuel droplet, the gas-phase combustion processes are much faster than the droplet surface regression rate and that the liquid phase is at a uniform temperature equal to the boiling point. Recent, more advanced models predict that both the liquid and gas phases are unsteady during a substantial portion of the droplet's burning history, thus affecting the instantaneous and average burning rates, and that flame radiation is a dominant mechanism that can extinguish flames in a microgravity environment. FSDC-2 has provided well-defined, symmetric droplet burning data including radiative emissions to validate these theoretical models for heptane, decane, ethanol, and methanol fuels. Since most commercial combustion systems burn droplets in a convective environment, data were obtained without and with convective flow over the burning droplet (see the following photos).

Constraints on CEMP-no progenitors from nuclear astrophysics

NASA Astrophysics Data System (ADS)

Choplin, Arthur; Maeder, André; Meynet, Georges; Chiappini, Cristina

2016-09-01

Context. The CEMP-no stars are long-lived small mass stars presenting a very low iron content and overabundances of carbon with no sign or only very weak signs of s- or r-elements. Although the origin of this abundance pattern is still a matter of debate, it was very likely inherited from a previous massive star, which we call the source star. Aims: We rely on a recent classification of CEMP-no stars arguing that some of them are made of a material processed by hydrogen burning that was enriched in products of helium burning during the nuclear life of the source star. We examine the possibility of forming CEMP-no stars with this material. Methods: We study the nucleosynthesis of the CNO cycle and the Ne-Na Mg-Al chains in a hydrogen burning single zone while injecting the helium burning products 12C, 16O, 22Ne, and 26Mg. We investigate the impact of changing density, temperature and the injection rate. The nuclear reaction rates involving the creation and destruction of 27Al are also examined. Results: 14N, 23Na, 24Mg, and 27Al are formed when injecting 12C, 16O, 22Ne, and 26Mg in the hydrogen burning zone. The 12C/13C ratio is constant under various conditions in the hydrogen burning zone. The predicted [Al/Fe] ratio varies up to ~ 2 dex depending on the prescription used for the reaction rates involving 27Al. Conclusions: The experiments we carried out support the view that some CEMP-no stars are made of a material processed by hydrogen burning that comes from a massive star experiencing mild to strong rotational mixing. During its burning, this material was likely enriched in helium burning products. No material coming from the carbon-oxygen rich core of the source star should be added to form the daughter star, otherwise the 12C/13C ratio would be largely above the observed range of values.

40 CFR Appendix - Tables to Subpart DDDDD of Part 63

Code of Federal Regulations, 2012 CFR

2012-07-01

.... Mercury 2.1E-07 lb per MMBtu of heat input 0.2E-06 Collect enough volume to meet an in-stack detection... time, use a span value of 20 ppmv. e. Dioxins/Furans 4 ng/dscm (TEQ) corrected to 7 percent oxygen 9.2E....2E-09 (TEQ) Collect a minimum of 1 dscm per run. 12. Units designed to burn gas 2 (other) gases a...

40 CFR Appendix - Tables to Subpart DDDDD of Part 63

Code of Federal Regulations, 2011 CFR

2011-07-01

.... Mercury 2.1E-07 lb per MMBtu of heat input 0.2E-06 Collect enough volume to meet an in-stack detection... time, use a span value of 20 ppmv. e. Dioxins/Furans 4 ng/dscm (TEQ) corrected to 7 percent oxygen 9.2E....2E-09 (TEQ) Collect a minimum of 1 dscm per run. 12. Units designed to burn gas 2 (other) gases a...

40 CFR Table 12 to Subpart Ddddd... - Alternative Emission Limits for New or Reconstructed Boilers and Process Heaters That Commenced...

Code of Federal Regulations, 2014 CFR

2014-07-01

.../solid fossil fuels on an annual heat input basis a. Particulate Matter 0.008 lb per MMBtu of heat input... all subcategories designed to burn solid fuel that combust at least 10 percent coal/solid fossil fuels.../solid fossil fuel a. CO 90 ppm by volume on a dry basis corrected to 3 percent oxygen 1 hr minimum...

40 CFR Table 12 to Subpart Ddddd... - Alternative Emission Limits for New or Reconstructed Boilers and Process Heaters That Commenced...

Code of Federal Regulations, 2013 CFR

2013-07-01

.../solid fossil fuels on an annual heat input basis a. Particulate Matter 0.008 lb per MMBtu of heat input... all subcategories designed to burn solid fuel that combust at least 10 percent coal/solid fossil fuels.../solid fossil fuel a. CO 90 ppm by volume on a dry basis corrected to 3 percent oxygen 1 hr minimum...

Experimental study on flowing burning behaviors of a pool fire with dripping of melted thermoplastics.

PubMed

Xie, Qiyuan; Tu, Ran; Wang, Nan; Ma, Xin; Jiang, Xi

2014-02-28

The objective of this work is to quantitatively investigate the dripping-burning and flowing fire of thermoplastics. A new experimental setup is developed with a heating vessel and a T-trough. Hot thermoplastic liquids are generated in the vessel by electric heating. N2 gas is continuously injected into the vessel to avoid a sudden ignition of fuel in it. The detailed flowing burning behaviors of pool fire in the T-trough are analyzed through the measurements of the mass, heat flux and temperatures etc. The experimental results suggest that a continuous dripping of melted thermoplastic liquids in a nearly constant mass rate can be successfully made in the new setup. It also shows that the mass dripping rate of melted PS liquid is smaller than PP and PE since its large viscosity. In addition, the flame spread velocities of hot liquids of PS in the T-trough are also smaller than that of PP and PE because of its large viscosity. The mass burning rate of the PP and PE pool fire in T-trough are smaller than PS. Finally, considering the heating, melting, dripping and flowing burning behaviors of these polymers, it is suggested that the fire hazard of PE and PP are obviously higher than PS for their faster flowing burning. Copyright © 2013 Elsevier B.V. All rights reserved.

Reflective measurement of water concentration using millimeter wave illumination

NASA Astrophysics Data System (ADS)

Sung, Shijun; Bennett, David; Taylor, Zachary; Bajwa, Neha; Tewari, Priyamvada; Maccabi, Ashkan; Culjat, Martin; Singh, Rahul; Grundfest, Warren

2011-04-01

THz and millimeter wave technology have shown the potential to become a valuable medical imaging tool because of its sensitivity to water and safe, non-ionizing photon energy. Using the high dielectric constant of water in these frequency bands, reflectionmode THz sensing systems can be employed to measure water content in a target with high sensitivity. This phenomenology may lead to the development of clinical systems to measure the hydration state of biological targets. Such measurements may be useful in fast and convenient diagnosis of conditions whose symptoms can be characterized by changes in water concentration such as skin burns, dehydration, or chemical exposure. To explore millimeter wave sensitivity to hydration, a reflectometry system is constructed to make water concentration measurements at 100 GHz, and the minimum detectable water concentration difference is measured. This system employs a 100 GHz Gunn diode source and Golay cell detector to perform point reflectivity measurements of a wetted polypropylene towel as it dries on a mass balance. A noise limited, minimum detectable concentration difference of less than 0.5% by mass can be detected in water concentrations ranging from 70% to 80%. This sensitivity is sufficient to detect hydration changes caused by many diseases and pathologies and may be useful in the future as a diagnostic tool for the assessment of burns and other surface pathologies.

High-Pressure Burning Rate Studies of Solid Rocket Propellants

DTIC Science & Technology

2013-01-01

monopropellant burning rate. The self-de§agration rates of neat AP are plotted in Fig. 2 for both pressed pellets and single crystals. There is agreement...rate data from various investigators: 1 ¡ [2]; pressed pellets : 2 ¡ [3], 3 ¡ [4], and 4 ¡ [2]; and single crystals: 5 ¡ [5], and 6 ¡ [6]. Line ¡ AP...7]. Strand or window burners have had more use in the solid propellant community. There are numerous types and styles of combustion vessels, but they

Soil properties and root biomass responses to prescribed burning in young Corsican pine (Pinus nigra Arn.) stands.

PubMed

Tufekcioglu, Aydin; Kucuk, Mehmet; Saglam, Bulent; Bilgili, Ertugrul; Altun, Lokman

2010-05-01

Fire is an important tool in the management of forest ecosystems. Although both prescribed and wildland fires are common in Turkey, few studies have addressed the influence of such disturbances on soil properties and root biomass dynamics. In this study, soil properties and root biomass responses to prescribed fire were investigated in 25-year-old corsican pine (Pinus nigra Arn.) stands in Kastamonu, Turkey. The stands were established by planting and were subjected to prescribed burning in July 2003. Soil respiration rates were determined every two months using soda-lime method over a two-year period. Fine (0-2 mm diameter) and small root (2-5 mm diameter) biomass were sampled approximately bimonthly using sequential coring method. Mean daily soil respiration ranged from 0.65 to 2.19 g Cm(-2) d(-1) among all sites. Soil respiration rates were significantly higher in burned sites than in controls. Soil respiration rates were correlated significantly with soil moisture and soil temperature. Fine root biomass was significantly lower in burned sites than in control sites. Mean fine root biomass values were 4940 kg ha(-1) for burned and 5450 kg ha(-1) for control sites. Soil pH was significantly higher in burned sites than in control sites in 15-35 cm soil depth. Soil organic matter content did not differ significantly between control and burned sites. Our results indicate that, depending on site conditions, fire could be used successfully as a tool in the management of forest stands in the study area.

[Emission inventory of greenhouse gases from agricultural residues combustion: a case study of Jiangsu Province].

PubMed

Liu, Li-hua; Jiang, Jing-yan; Zong, Liang-gang

2011-05-01

Burning of agricultural crop residues was a major source greenhouse gases. In this study, the proportion of crop straws (rice, wheat, maize, oil rape, cotton and soja) in Jiangsu used as household fuel and direct open burning in different periods (1990-1995, 1996-2000, 2001-2005 and 2006-2008) was estimated through questionnaire. The emission factors of CO2, CO, CH4 and NO20 from the above six types of crop straws were calculated by the simulated burning experiment. Thus the emission inventory of greenhouse gases from crop straws burning was established according to above the burning percentages and emission factors, ratios of dry residues to production and crop productions of different periods in Jiangsu province. Results indicated that emission factors of CO2, CO, CH4 and N2O depended on crop straw type. The emission factors of CO2 and CH4 were higher for oil rape straw than the other straws, while the maize and the rice straw had the higher N2O and CO emission factor. Emission inventory of greenhouse gases from agricultural residues burning in Jiangsu province showed, the annual average global warming potential (GWP) of six tested crop straws were estimated to be 9.18 (rice straw), 4.35 (wheat straw), 2.55 (maize straw), 1.63 (oil rape straw), 0.55 (cotton straw) and 0. 39 (soja straw) Tg CO2 equivalent, respectively. Among the four study periods, the annual average GWP had no obvious difference between the 1990-1995 and 2006-2008 periods, while the maximal annual average GWP (23.83 Tg CO2 equivalent) happened in the 1996-2000 period, and the minimum (20.30 Tg CO2 equivalent) in 1996-2000 period.

From Lawson to Burning Plasmas: a Multi-Fluid Approach

NASA Astrophysics Data System (ADS)

Guazzotto, Luca; Betti, Riccardo

2017-10-01

The Lawson criterion, easily compared to experimental parameters, gives the value for the triple product of plasma density, temperature and energy confinement time needed for the plasma to ignite. Lawson's inaccurate assumptions of 0D geometry and single-fluid plasma model were improved in recent work, where 1D geometry and multi-fluid (ions, electrons and alphas) physics were included in the model, accounting for physical equilibration times and different energy confinement times between species. A much more meaningful analysis than Lawson's for current and future experiment would be expressed in terms of burning plasma state (Q=5, where Q is the ratio between fusion power and heating power). Minimum parameters for reaching Q=5 are calculated based on experimental profiles for density and temperatures and can immediately be compared with experimental performance by defining a no-alpha pressure. This is done in terms of the pressure that the plasma needs to reach for breakeven once the alpha heating has been subtracted from the energy balance. These calculations can be applied to current experiments and future burning-plasma devices. DE-FG02-93ER54215.

Uniform-burning matrix burner

DOEpatents

Bohn, Mark S.; Anselmo, Mark

2001-01-01

Computer simulation was used in the development of an inward-burning, radial matrix gas burner and heat pipe heat exchanger. The burner and exchanger can be used to heat a Stirling engine on cloudy days when a solar dish, the normal source of heat, cannot be used. Geometrical requirements of the application forced the use of the inward burning approach, which presents difficulty in achieving a good flow distribution and air/fuel mixing. The present invention solved the problem by providing a plenum with just the right properties, which include good flow distribution and good air/fuel mixing with minimum residence time. CFD simulations were also used to help design the primary heat exchanger needed for this application which includes a plurality of pins emanating from the heat pipe. The system uses multiple inlet ports, an extended distance from the fuel inlet to the burner matrix, flow divider vanes, and a ring-shaped, porous grid to obtain a high-temperature uniform-heat radial burner. Ideal applications include dish/Stirling engines, steam reforming of hydrocarbons, glass working, and any process requiring high temperature heating of the outside surface of a cylindrical surface.

Plasma L-5-oxoproline kinetics and whole blood glutathione synthesis rates in severely burned adult humans.

PubMed

Yu, Yong-Ming; Ryan, Colleen M; Fei, Zhe-Wei; Lu, Xiao-Ming; Castillo, Leticia; Schultz, John T; Tompkins, Ronald G; Young, Vernon R

2002-02-01

Compromised glutathione homeostasis is associated with increased morbidity in various disease states. We evaluated the kinetics of L-5-oxoproline, an intermediate in the gamma-glutamyl cycle of glutathione production, in fourteen severely burned adults by use of a primed, constant intravenous infusion of L-5-[1-(13)C]oxoproline. In nine of these patients, whole blood glutathione synthesis and plasma kinetics of glycine and leucine were also measured with [(15)N]glycine and L-[(2)H(3)]leucine tracers. Patients were studied under a "basal" condition that provided a low dose of glucose and total parenteral nutrition. For comparison with control subjects, whole blood glutathione synthesis was estimated in six healthy adults. Burn patients in a basal condition showed significantly higher rates of plasma oxoproline clearance and urinary D- and L-oxoproline excretion compared with fasting healthy control subjects. Whole blood glutathione concentration and absolute synthesis rate in the basal state were lower than for control subjects. Total parenteral feeding without cysteine but with generous methionine did not affect oxoproline kinetics or whole blood glutathione synthesis. The estimated rate of glycine de novo synthesis was also lower in burn patients, suggesting a possible change in glycine availability for glutathione synthesis. The roles of precursor amino acid availability, as well as alterations in metabolic capacity, in modulating whole blood glutathione production in burns now require investigation.

Fuel droplet burning rates at high pressures

NASA Technical Reports Server (NTRS)

Canada, G. S.; Faeth, G. M.

1972-01-01

Combustion of methanol, ethanol, propanol -1, n - pentane, n - heptane and n - decane was observed in air under natural convection conditions at pressures up to 100 atm. The droplets were simulated by porous spheres with diameters in the range 0.63 - 1.90 cm. The pressure levels of the tests were high enough so that near critical combustion was observed for methanol and ethanol. Measurements were made of the burning rate and liquid surface temperatures of the fuels. The data were compared with variable property analysis of the combustion process, including a correction for natural convection. The burning rate predictions of the various theories were similar and in fair agreement with the data. The high pressure theory gave the best prediction for the liquid surface temperatures of ethanol and propanol -1 at high pressure. The experiments indicated the approach of critical burning conditions for methanol and ethanol at pressures on the order of 80 - 100 atm, which was in good agreement with the predictions of both the low and high pressure analysis.

The role and importance of porosity in the deflagration rates of HMX-based materials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glascoe, E A; Hsu, P C; Springer, H K

The deflagration behavior of thermally damaged HMX-based materials will be discussed. Strands of material were burned at pressures ranging from 10-300 MPa using the LLNL high pressure strand burner. Strands were heated in-situ and burned while still hot; temperatures range from 90-200 C and were chosen in order to allow for thermal damage of the material without significant decomposition of the HMX. The results indicate that multiple variables affect the burn rate but the most important are the polymorph of HMX and the nature and thermal stability of the non-HE portion of the material. Characterization of the strands indicate thatmore » the thermal soak produces significant porosity and permeability in the sample allowing for significantly faster burning due to the increased surface area and new pathways for flame spread into the material. Specifically, the deflagration rates of heated PBXN-9, LX-10, and PBX-9501 will be discussed and compared.« less

[Changes of soil nutrient contents after prescribed burning of forestland in Heshan City, Guangdong Province].

PubMed

Sun, Yu-xin; Wu, Jian-ping; Zhou, Li-xia; Lin, Yong-biao; Fu, Sheng-lei

2009-03-01

A comparative study was conducted to analyze the changes of soil nutrient contents in Eucalyptus forestland and in shrubland after three years of prescribed burning. In Eucalyptus forestland, soil organic carbon, total nitrogen, available potassium contents and soil pH decreased significantly; soil available phosphorus and exchangeable magnesium contents, net nitrogen mineralization rate and ammonification rate also decreased but showed no significant difference. In shrubland, soil exchangeable calcium content increased significantly, but the contents of other nutrients had no significant change. The main reason of the lower soil net nitrogen mineralization rate in Eucalyptus forest could be the decrease of available substrates and the uptake of larger amount of soil nutrients by the fast growth of Eucalyptus. The soil nutrients in shrubland had a quick restoration rate after burning.

5 CFR 532.249 - Minimum rates for hard-to-fill positions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 1 2012-01-01 2012-01-01 false Minimum rates for hard-to-fill positions. 532.249 Section 532.249 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Prevailing Rate Determinations § 532.249 Minimum rates for hard-to-fill...

5 CFR 532.249 - Minimum rates for hard-to-fill positions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Minimum rates for hard-to-fill positions. 532.249 Section 532.249 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Prevailing Rate Determinations § 532.249 Minimum rates for hard-to-fill...

5 CFR 532.249 - Minimum rates for hard-to-fill positions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Minimum rates for hard-to-fill positions. 532.249 Section 532.249 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Prevailing Rate Determinations § 532.249 Minimum rates for hard-to-fill...

Regional Changes in Charcoal-Burning Suicide Rates in East/Southeast Asia from 1995 to 2011: A Time Trend Analysis

PubMed Central

Chang, Shu-Sen; Chen, Ying-Yeh; Yip, Paul S. F.; Lee, Won Jin; Hagihara, Akihito; Gunnell, David

2014-01-01

Background Suicides by carbon monoxide poisoning resulting from burning barbecue charcoal reached epidemic levels in Hong Kong and Taiwan within 5 y of the first reported cases in the early 2000s. The objectives of this analysis were to investigate (i) time trends and regional patterns of charcoal-burning suicide throughout East/Southeast Asia during the time period 1995–2011 and (ii) whether any rises in use of this method were associated with increases in overall suicide rates. Sex- and age-specific trends over time were also examined to identify the demographic groups showing the greatest increases in charcoal-burning suicide rates across different countries. Methods and Findings We used data on suicides by gases other than domestic gas for Hong Kong, Japan, the Republic of Korea, Taiwan, and Singapore in the years 1995/1996–2011. Similar data for Malaysia, the Philippines, and Thailand were also extracted but were incomplete. Graphical and joinpoint regression analyses were used to examine time trends in suicide, and negative binomial regression analysis to study sex- and age-specific patterns. In 1995/1996, charcoal-burning suicides accounted for <1% of all suicides in all study countries, except in Japan (5%), but they increased to account for 13%, 24%, 10%, 7%, and 5% of all suicides in Hong Kong, Taiwan, Japan, the Republic of Korea, and Singapore, respectively, in 2011. Rises were first seen in Hong Kong after 1998 (95% CI 1997–1999), followed by Singapore in 1999 (95% CI 1998–2001), Taiwan in 2000 (95% CI 1999–2001), Japan in 2002 (95% CI 1999–2003), and the Republic of Korea in 2007 (95% CI 2006–2008). No marked increases were seen in Malaysia, the Philippines, or Thailand. There was some evidence that charcoal-burning suicides were associated with an increase in overall suicide rates in Hong Kong, Taiwan, and Japan (for females), but not in Japan (for males), the Republic of Korea, and Singapore. Rates of change in charcoal-burning suicide rate did not differ by sex/age group in Taiwan and Hong Kong but appeared to be greatest in people aged 15–24 y in Japan and people aged 25–64 y in the Republic of Korea. The lack of specific codes for charcoal-burning suicide in the International Classification of Diseases and variations in coding practice in different countries are potential limitations of this study. Conclusions Charcoal-burning suicides increased markedly in some East/Southeast Asian countries (Hong Kong, Taiwan, Japan, the Republic of Korea, and Singapore) in the first decade of the 21st century, but such rises were not experienced by all countries in the region. In countries with a rise in charcoal-burning suicide rates, the timing, scale, and sex/age pattern of increases varied by country. Factors underlying these variations require further investigation, but may include differences in culture or in media portrayals of the method. Please see later in the article for the Editors' Summary PMID:24691071

Preparation of Partial-Thickness Burn Wounds in Rodents Using a New Experimental Burning Device.

PubMed

Sakamoto, Michiharu; Morimoto, Naoki; Ogino, Shuichi; Jinno, Chizuru; Kawaguchi, Atsushi; Kawai, Katsuya; Suzuki, Shigehiko

2016-06-01

The manual application of hot water or hot metal to an animal's skin surface is often used to prepare burn wound models. However, manual burn creation is subject to human variability. We developed a new device that can control the temperature, time, and pressure of contact to produce precise and reproducible animal burn wounds and investigated the conditions required to prepare various burn wounds using our new device. We prepared burn wounds on F344 rats using 3 contact times 2, 4, and 10 seconds using a stamp heated to 80°C. We observed the wound-healing process macroscopically and histologically and evaluated the burn depth using a laser speckle contrast-imaging device, which evaluated the blood flow of the wound. The changes in the burned area over time, tissue perfusion of the burn wounds, histological evaluation of the burn depth by hematoxylin-eosin and azocarmine and aniline blue staining, and the epithelialization rate (the ratio of the epithelialized area to the wound length) were evaluated on histological sections. Results indicated that the burn wounds prepared with contact times of 2, 4, and 10 seconds corresponded to superficial dermal burns, deep dermal burns, and full-thickness burns, respectively. We demonstrated that partial- and full-thickness burn wounds can be precisely and reproducibly created with our new automated burning device.

40 CFR Table 24 to Subpart Uuu of... - Continuous Monitoring Systems for Inorganic HAP Emissions From Catalytic Reforming Units

Code of Federal Regulations, 2011 CFR

2011-07-01

... entering the scrubber during coke burn-off and catalyst rejuvenation; and continuous parameter monitoring system to measure and record gas flow rate entering or exiting the scrubber during coke burn-off and... alkalinity of the water (or scrubbing liquid) exiting the scrubber during coke burn-off and catalyst...

Infiltration and interrill erosion rates after a wildfire in western Montana, USA

USDA-ARS?s Scientific Manuscript database

The 2000 Valley Complex wildfire burned in steep montane forests with ash cap soils in western Montana, USA. The effects of high burn severity on forest soil hydrologic function was examined using rainfall simulations (100 mm h-1 for 1 h) on 0.5-m2 plots. Infiltration rates and sediment yields and c...

Reaction rate for carbon burning in massive stars

DOE PAGES

Jiang, C. L.; Santiago-Gonzalez, D.; Almaraz-Calderon, S.; ...

2018-01-10

Carbon burning is a critical phase for nucleosynthesis in massive stars. The conditions for igniting this burning stage, and the subsequent isotope composition of the resulting ashes, depend strongly on the reaction rate for 12C+ 12C fusion at very low energies. Results for the cross sections for this reaction are influenced by various backgrounds encountered in measurements at such energies. In this paper, we report on a new measurement of 12C+ 12C fusion cross sections where these backgrounds have been minimized. In conclusion, it is found that the astrophysical S factor exhibits a maximum around E cm=3.5–4.0 MeV, which leadsmore » to a reduction of the previously predicted astrophysical reaction rate.« less

A small single-nozzle rainfall simulator to measure erosion response on different burn severities in southern British Columbia, Canada

NASA Astrophysics Data System (ADS)

Covert, Ashley; Jordan, Peter

2010-05-01

To study the effects of wildfire burn severity on runoff generation and soil erosion from high intensity rainfall, we constructed an effective yet simple rainfall simulator that was inexpensive, portable and easily operated by two people on steep, forested slopes in southern British Columbia, Canada. The entire apparatus, including simulator, pumps, hoses, collapsible water bladders and sample bottles, was designed to fit into a single full-sized pick-up truck. The three-legged simulator extended to approximately 3.3 metres above ground on steep slopes and used a single Spraying Systems 1/2HH-30WSQ nozzle which can easily be interchanged for other sized nozzles. Rainfall characteristics were measured using a digital camera which took images of the raindrops against a grid. Median drop size and velocity 5 cm above ground were measured and found to be 3/4 of the size of natural rain drops of that diameter class, and fell 7% faster than terminal velocity. The simulator was used for experiments on runoff and erosion on sites burned in 2007 by two wildfires in southern British Columbia. Simulations were repeated one and two years after the fires. Rainfall was simulated at an average rate of 67 mm hr-1 over a 1 m2 plot for 20 minutes. This rainfall rate is similar to the 100 year return period rainfall intensity for this duration at a nearby weather station. Simulations were conducted on five replicate 1 m2 plots in each experimental unit including high burn severity, moderate burn severity, unburned, and unburned with forest floor removed. During the simulation a sample was collected for 30 seconds every minute, with two additional samples until runoff ceased, resulting in 22 samples per simulation. Runoff, overland flow coefficient, infiltration and sediment yield were compared between treatments. Additional simulations were conducted immediately after a 2009 wildfire to test different mulch treatments. Typical results showed that runoff on plots with high burn severity and with forest floor removed was similar, reaching on average a steady rate of about 60% of rainfall rate after about 7 minutes. Runoff on unburned plots with intact forest floor was much lower, typically less than 20% of rainfall rate. Sediment yield was greatest on plots with forest floor removed, followed by severely burned plots. Sediment yield on unburned and moderately burned plots was very low to zero. These results are consistent with qualitative observations made following several extreme rainfall events on recent burns in the region.

Near Surface Vapor Bubble Layers in Buoyant Low Stretch Burning of Polymethylmethacrylate

NASA Technical Reports Server (NTRS)

Olson, Sandra L.; Tien, J. S.

1999-01-01

Large-scale buoyant low stretch stagnation point diffusion flames over solid fuel (polymethylmethacrylate) were studied for a range of aerodynamic stretch rates of 2-12/ sec which are of the same order as spacecraft ventilation-induced stretch in a microgravity environment. An extensive layer of polymer material above the glass transition temperature is observed. Unique phenomena associated with this extensive glass layer included substantial swelling of the burning surface, in-depth bubble formation, and migration and/or elongation of the bubbles normal to the hot surface. The bubble layer acted to insulate the polymer surface by reducing the effective conductivity of the solid. The reduced in-depth conduction stabilized the flame for longer than expected from theory neglecting the bubble layer. While buoyancy acts to move the bubbles deeper into the molten polymer, thermocapillary forces and surface regression both act to bring the bubbles to the burning surface. Bubble layers may thus be very important in low gravity (low stretch) burning of materials. As bubbles reached the burning surface, monomer fuel vapors jetted from the surface, enhancing burning by entraining ambient air flow. Popping of these bubbles at the surface can expel burning droplets of the molten material, which may increase the fire propagation hazards at low stretch rates.

Paediatric electrical burn injuries: experience from a tertiary care burns unit in North India

PubMed Central

Srivastava, S.; Patil, A.N.; Bedi, M.; Tawar, R.S.

2017-01-01

Summary Electrical burn injuries in the paediatric age group constitute a small proportion of all burn cases and cause significant morbidity and long-term psychosocial impact. The objective of this study was to evaluate various aspects of electrical burn injuries in the paediatric age group in our region. A retrospective review was done of all paediatric electrical burns admitted to a tertiary care burns unit over a period of 12 months (January 2016 to December 2016). There were 77 cases of electrical burns under the age of 16 years. High voltage burns predominated and older age groups were more frequently affected. Male:female ratio was 4.1:1. Amputations were required in 18 (23%), skin grafting in 52 (67%) and flap cover in 29 (37%) patients. There were unfavourable outcomes in 32% patients with a mortality rate of 7.8%. Significant association was found between unfavourable outcomes and high voltage burn injuries and length of hospital stay. The impact of electrical burn injuries is substantial and can be reduced by simple preventive measures such as educating parents, improving health infrastructure and adherence to safety regulations.

Green and ecofriendly synthesis of silver nanoparticles: Characterization, biocompatibility studies and gel formulation for treatment of infections in burns.

PubMed

Jadhav, Kiran; Dhamecha, Dinesh; Bhattacharya, Debdutta; Patil, Mrityunjaya

2016-02-01

The current study summarizes a unique green process for the synthesis of silver nanoparticles (AgNPs) by simple treatment of silver nitrate with aqueous extract of Ammania baccifera. Phytosynthesized AgNPs were characterized by various advanced analytical methods and studied for its use against infections associated with burns. Formation of AgNPs was observed by visual color change from colorless to dark brown and confirmed by UV-visible characteristic peak at 436 nm. Zeta potential, particle size and polydispersity index of nano-silver were found to be -33.1 ± 1.12, 112.6 ± 6.8 nm and 0.3 ± 0.06 respectively. XRD spectra revealed crystalline nature of AgNPs whereas TEM confirmed the presence of mixed morphology of AgNPs. The overall approach designated in the present research investigation for the synthesis of AgNPs is based on all 12 principles of green chemistry, in which no man-made chemical other than the silver nitrate was used. Synthesized nano-silver colloidal dispersion was initially tested for minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) against a panel of organisms involved in infections associated with burns (Pseudomonas aeruginosa (PA), Staphylococcus aureus (SA) and methicillin resistant S. aureus (MRSA)). MIC and MBC were found to be in range of 0.992 to 7.93 and 7.93 to 31.75 μg/mL respectively. MBC was used for formulation of AgNP gel and tested for its efficacy using agar well diffusion method against PA, SA and MRSA. Comparative bactericidal efficacy of formulated gel (0.03% w/w) and marked formulation Silverex™ ionic (silver nitrate gel 0.2% w/w) showed equal zone of inhibition against all pathogenic bacteria. Formulated AgNP gel consisting of 95% lesser concentration of silver compared to marketed formulation was found to be equally effective against all organisms. Hence, the formulated AgNP gel could serve as a better alternative with least toxicity towards the treatment presently available for infections in burns. Copyright © 2016 Elsevier B.V. All rights reserved.

A Modeling Approach for Burn Scar Assessment Using Natural Features and Elastic Property

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tsap, L V; Zhang, Y; Goldgof, D B

2004-04-02

A modeling approach is presented for quantitative burn scar assessment. Emphases are given to: (1) constructing a finite element model from natural image features with an adaptive mesh, and (2) quantifying the Young's modulus of scars using the finite element model and the regularization method. A set of natural point features is extracted from the images of burn patients. A Delaunay triangle mesh is then generated that adapts to the point features. A 3D finite element model is built on top of the mesh with the aid of range images providing the depth information. The Young's modulus of scars ismore » quantified with a simplified regularization functional, assuming that the knowledge of scar's geometry is available. The consistency between the Relative Elasticity Index and the physician's rating based on the Vancouver Scale (a relative scale used to rate burn scars) indicates that the proposed modeling approach has high potentials for image-based quantitative burn scar assessment.« less

An experimental study of high-pressure droplet combustion

NASA Technical Reports Server (NTRS)

Norton, Chris M.; Litchford, Ron J.; Jeng, San-Mou

1990-01-01

The results are presented of an experimental study on suspended n-heptane droplet combustion in air for reduced pressures up to P(r) = 2.305. Transition to fully transient heat-up through the critical state is demonstrated above a threshold pressure corresponding to P(r) of roughly 1.4. A silhouette imaging technique resolves the droplet surface for reduced pressures up to about P(r) roughly 0.63, but soot formation conceals the surface at higher pressures. Images of the soot plumes do not show any sudden change in behavior indicative of critical transition. Mean burning rate constants are computed from the d-squared variation law using measured effective droplet diameters at ignition and measured burn times, and corrected burning times are computed for an effective initial droplet diameter. The results show that the burning rates increase as the fuel critical pressure is approached and decrease as the pressure exceeds the fuel critical pressure. Corrected burning times show inverse behavior.

[Burn injuries to military personnel during the Six Day War].

PubMed

Dreyfuss, U Y

2000-05-01

About 2500 soldiers were injured during the Six Day War (June 1967) of whom 115 suffered from burns. In 34 of them 15% or more of their body surface was involved and 11 died. Typical features of these burn cases were supplementary injuries, a high rate of infection, and long periods of hospitalization. Prophylactic antibiotics were not useful. The general condition of many deteriorated during the first week after injury, indicating the importance of treating severe burns in specialized facilities.

Credit PSR. This photograph looks south southwest (200°) into the ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Credit PSR. This photograph looks south southwest (200°) into the burn pit. Scrap propellant was stored elsewhere until enough had accumulated to require a burn. The open burn unit is rated for 200 pounds (91 Kg) of class 1.1 propellants, or 1,000 pounds (454 Kg) of class 1.3 propellants. A maximum of 4 personnel were permitted on the grounds during a burn - Jet Propulsion Laboratory Edwards Facility, Incinerator, Edwards Air Force Base, Boron, Kern County, CA

Artemisinin protects mice against burn sepsis through inhibiting NLRP3 inflammasome activation.

PubMed

Long, Huibao; Xu, Bincan; Luo, Yanling; Luo, Keqin

2016-05-01

NLRP3 inflammasome activation is recently reported to be linked to the pathogenesis of sepsis. Artemisinin is shown to play beneficial effects in sepsis. However, the impacts of artemisinin on burn sepsis have not been investigated. This study is designed to investigate the role of artemisinin in burn sepsis and the involvement of NLRP3 inflammasome activation. Male BALB/c mice were randomly divided into sham burn, burn, burn sepsis, and artemisinin treated groups. Inflammatory cytokines were measured by enzyme-linked immunosorbent assay. Adhesion molecules and neutrophil infiltration in lung and heart were detected by real-time polymerase chain reaction. Mortality rates were monitored. Artemisinin was added to Raw 264.7 cells that were stimulated with burn sepsis serum in the presence/absence of an inhibitor of NLRP3 inflammasome, 3, 4-methylenedioxy-β-nitrostyrene. Interleukin (IL) 1β and IL-18 messenger RNA expression as well as NLRP3 and caspase 1 protein were measured. Production of inflammatory cytokines in serum, levels of adhesion molecules and neutrophil infiltration in lung and heart, and mortality rate of burn septic mice were significantly higher than those of control. These effects were attenuated by artemisinin. Artemisinin down-regulated protein levels of NLRP3 and caspase 1 and inhibited the increases of IL-1β and IL-18 messenger RNA expression from Raw 264.7 cells that were stimulated with burn sepsis serum. These effects of artemisinin were not further strengthened in the presence of 4-methylenedioxy-β-nitrostyrene. Artemisinin protects mice from burn sepsis by attenuating the inflammatory response and alleviating inflammatory infiltration in vital organs, likely through inhibiting the activation of NLRP3 inflammasome. Copyright © 2016 Elsevier Inc. All rights reserved.

Review of the use of povidone-iodine (PVP-I) in the treatment of burns.

PubMed

Steen, M

1993-01-01

Local infection and burn wound sepsis are one of the most severe problems in the treatment of thermally injured patients. Early surgical treatment and the use of topical antiseptics led to a decrease in the infection rate and significantly improved the survival rate of burns patients within the last twenty-five years. Many antiseptics are used in the treatment of burns. Silver nitrate, silver sulphadiazine, sulfamylon and povidone-iodine (PVP-I) are the most common substances used worldwide in burn care facilities. Clinical studies demonstrate that treatment with PVP-I is the most effective against bacterial and fungal infection. Several methodological problems however arise from direct comparison between these antiseptics, and local and systemic adverse effects can make the right choice difficult. Some case reports documented possible side effects in the treatment of patients with PVP-I, leading to general concerns about this treatment. Absorption of iodine and possible changes in thyroid hormones are well known, but evaluation of the clinical consequences is controversial. Reports of severe metabolic acidosis and renal insufficiency with lethal results have condemned the use of PVP-I in the treatment of extensive burns. The case reports, however, dealt with patients suffering from general morbidity and sepsis and therefore these single reports may not be generally valid. Local treatment of burns may cause further problems. The beneficial effect of a decrease of bacterial counts in deeper tissue may be confounded by other effects delaying wound healing, as shown in some experimental studies. Controlled clinical investigations on burn patients however are still missing. The paper will discuss these topics in detail referring to the treatment of burns with PVP-I. It is based on a critical review of the literature and the author's own experience in burns therapy.

Upon admission coagulation and platelet function in patients with thermal and electrical injuries.

PubMed

Wade, Charles E; Baer, Lisa A; Cardenas, Jessica C; Folkerson, Lindley E; Nutall-Aurora, Kisha; Cotton, Bryan A; Matijevic, Nena; Holcomb, John B; Cross, James M; Huzar, Todd

2016-12-01

There has been increased focus on hemostatic potential and function in the initial assessment of the patient with traumatic injuries, that not been extensively studied in patients with burns. We proposed to determine the hemostatic potential of patients with burns upon admission to the emergency department and contrasted their condition with that of healthy controls and patients with other traumatic injuries. In addition we assessed differences due to thermal versus electrical injury and evaluated the effect of burn size. This is a patient based prospective observational study conducted with delayed consented. Subjects at the highest level of trauma activation upon admission to the ED had a blood sample collected for research purposes and were subsequently consented. Hemostatic potential was measured by rapid thromelastography (r-TEG ® ), thrombin generation by calibrated automated thrombogram (CAT) and platelet function by Multiplate ® using five activators. Burn subjects were compared to subjects with other traumatic injuries and controls. Within the burn subjects additional analysis compared mechanism (thermal vs. electrical) and burn size. Values are medians (IQR). Two hundred and eighty two trauma patients (with burns n=40, 14%) and 27 controls were enrolled. Upon admission, compared to controls, subjects with burns or trauma were hyper-coagulable based on r-TEG and CAT, with increased rates of clot formation and thrombin generation. There were no differences in burns compared to other traumatic injuries. The presence of hyper-coagulation did not appear to be related to the type of burn or the percentage of total body surface area involved. Employing previous defined cut points for R-TEG driven therapeutic interventions burn patients had similar rates of hyper- and hypo-coagulation noted in patients with traumatic injuries. Upon admission patients with burns are in a hyper-coagulable state similar to that of other trauma patients. Employing demonstrated cut points of hemostatic potential in trauma patients associated with increased risk of poor outcomes demonstrated the incidence in burn patients to be similar, suggesting that these values could be used in the early assessment of the patient with burns to guide treatment interventions. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Stellar explosions from accreting white dwarfs

NASA Astrophysics Data System (ADS)

Moore, Kevin L.

Unstable thermonuclear burning on accreting white dwarfs (WDs) can lead to a wide variety of outcomes, and induce shock waves in several contexts. In classical and recurrent novae, a WD accreting hydrogen-rich material from a binary companion can experience thermonuclear runaways, ejecting mass into the interstellar/circumbinary environment at ~1000 km/s. This highly supersonic ejecta drives shock waves into the interstellar gas which may be relevant for sweeping out gas from globular clusters or forming circumstellar absorption regions in interacting supernovae. While runaway nuclear burning in novae releases enough energy for these objects to brighten by a factor of ~10 4 over roughly a weeklong outburst, it does not become dynamically unstable. In contrast, certain helium accretion scenarios may allow for dynamical burning modes, in part due to the higher temperature sensitivity of helium burning reactions and larger accreted envelopes. The majority of this thesis involves such dynamical burning modes, specifically detonations - shock waves sustained by nuclear energy release behind the shock front. We investigate when steady-state detonations are realizable in accreted helium layers on WDs, and model their strength and burning products using both semi-analytic and numerical models. We find the minimum helium layer thickness that will sustain a steady laterally propagating detonation and show that it depends on the density and composition of the helium layer, specifically 12 C and 16O. Though gravitationally unbound, the ashes still have unburned helium (~80% in the thinnest cases) and only reach up to heavy elements such as 40Ca, 44Ti, 48Cr, and 52Fe. It is rare for these thin shells to generate large amounts of radioactive isotopes necessary to power light curves, such as 56Ni. This has important implications on whether the unbound helium burning ashes may create faint and fast peculiar supernovae or events with virtually no radioactivity, as well as on off-center ignition of the underlying WD in the double detonation scenario for Type Ia supernovae.

Impact of stress-induced diabetes on outcomes in severely burned children.

PubMed

Finnerty, Celeste C; Ali, Arham; McLean, Josef; Benjamin, Nicole; Clayton, Robert P; Andersen, Clark R; Mlcak, Ronald P; Suman, Oscar E; Meyer, Walter; Herndon, David N

2014-04-01

Post-burn hyperglycemia leads to graft failure, multiple organ failure, and death. A hyperinsulinemic-euglycemic clamp is used to keep serum glucose between 60 and 110 mg/dL. Because of frequent hypoglycemic episodes, a less-stringent sliding scale insulin protocol is used to maintain serum glucose levels between 80 and 160 mg/dL after elevations >180 mg/dL. We randomized pediatric patients with massive burns into 2 groups, patients receiving sliding scale insulin to lower blood glucose levels (n = 145) and those receiving no insulin (n = 98), to determine the differences in morbidity and mortality. Patients 0 to 18 years old with burns covering ≥ 30% of the total body surface area and not randomized to receive anabolic agents were included in this study. End points included glucose levels, infections, resting energy expenditure, lean body mass, bone mineral content, fat mass, muscle strength, and serum inflammatory cytokines, hormones, and liver enzymes. Maximal glucose levels occurred within 6 days of burn injury. Blood glucose levels were age dependent, with older children requiring more insulin (p < 0.05). Daily maximum and daily minimum, but not 6 am, glucose levels were significantly different based on treatment group (p < 0.05). Insulin significantly increased resting energy expenditure and improved bone mineral content (p < 0.05). Each additional wound infection increased incidence of hyperglycemia (p = 0.004). There was no mortality in patients not receiving insulin, only in patients who received insulin (p < 0.004). Muscle strength was increased in patients receiving insulin (p < 0.05). Burn-induced hyperglycemia develops in a subset of severely burned children. Length of stay was reduced in the no insulin group, and there were no deaths in this group. Administration of insulin positively impacted bone mineral content and muscle strength, but increased resting energy expenditure, hypoglycemic episodes, and mortality. New glucose-lowering strategies might be needed. Copyright © 2014 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Imipenem in burn patients: pharmacokinetic profile and PK/PD target attainment.

PubMed

Gomez, David S; Sanches-Giraud, Cristina; Silva, Carlindo V; Oliveira, Amanda M Ribas Rosa; da Silva, Joao Manoel; Gemperli, Rolf; Santos, Silvia R C J

2015-03-01

Unpredictable pharmacokinetics (PK) in burn patients may result in plasma concentrations below concentrations that are effective against common pathogens. The present study evaluated the imipenem PK profile and pharmacokinetic/pharmacodynamics (PK/PD) correlation in burn patients. Fifty-one burn patients, 38.7 years of age (mean), 68.0 kg, 36.3% total burn surface area (TBSA), of whom 84% (43/51) exhibited thermal injury, 63% inhalation injury and 16% electrical injury (8/51), all of whom were receiving imipenem treatment were investigated. Drug plasma monitoring, PK study (120 sets of plasma levels) and PK/PD correlation were performed in a series of blood samples. Only 250 μl of plasma samples were required for drug plasma measurements using the ultra filtration technique for the purification of biological matrix and quantification using liquid chromatography. Probability of target attainment (PTA) was calculated using a PD target of 40% free drug concentrations above the minimum inhibitory concentration (40%fT>MIC). Significant differences in PK parameters (medians), such as biological half-life (2.2 vs 5.5 h), plasma clearance (16.2 vs 1.4 l h(-1)) and volume of distribution (0.86 vs 0.19 l kg(-1)), were registered in burn patients via comparisons of set periods with normal renal function against periods of renal failure. Correlations between creatinine clearance and total body plasma clearance were also obtained. In addition, the PK profile did not change according to TBSA during sets when renal function was preserved. PTA was >89% for MIC values up to 4 mg l(-1). In conclusion, imipenem efficacy for the control of hospital infection on the basis of PK/PD correlation was guaranteed for burn in patients at the recommended dose regimens for normal renal function (31.1±9.7 mg kg(-1) daily), but the daily dose must be reduced to 17.2±9.7 mg kg(-1) during renal failure to avoid neurotoxicity.

Practice of first aid in burn related injuries in a developing country.

PubMed

Fadeyibi, Idowu Olusegun; Ibrahim, Nasiru Akanmu; Mustafa, Ibrahim Akinwunmi; Ugburo, Andrew Omotayo; Adejumo, Adedeji Olusola; Buari, Adedayo

2015-09-01

First aid with cool running water reduces the severity of burn. Low level of knowledge of first aid in burns was shown in previous studies with few patients receiving first aid by water lavage. A study investigating the use of water lavage as first aid in patients presenting to hospital with burn in Lagos, Nigeria was carried out. Patients admitted to a University Teaching Hospital for treatment of burns were recruited for this prospective study. Data detailing demographics, scene and aetiology of burns, material used for first aid, who administered first aid, level of education and relationship of first-aider with patients, length of hospital stay, complications and outcome of treatment were collected and statistical analysis performed. 168 patients; 73 (43.4%) children and 95 (56.6%) adults were seen. Burns were sustained at home in 95 (74.2%) cases and outside in 33 (25.8%). Water lavage was used in 49 (29.2%) cases, raw eggs in 21 (12.5%), pap in 16 (9.5%) and other materials in 48.8%. 40 (23.8%) patients had not received any form of first aid at presentation. Patients that received no water first aid had higher complication rate (35.3% versus 18.4%) compared with those that had water first aid. The use of water first aid in burns was shown to reduce complication rate in this study. People should be educated on the efficacy of water first aid in pre-hospital care of burns. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Bridging burn care education with modern technology, an integration with high fidelity human patient simulation.

PubMed

Reeves, Patrick T; Borgman, Matthew A; Caldwell, Nicole W; Patel, Leela; Aden, James; Duggan, John P; Serio-Melvin, Maria L; Mann-Salinas, Elizabeth A

2018-08-01

The Advanced Burn Life Support (ABLS) program is a burn-education curriculum nearly 30 years in the making, focusing on the unique challenges of the first 24h of care after burn injury. Our team applied high fidelity human patient simulation (HFHPS) to the established ABLS curriculum. Our hypothesis was that HFHPS would be a feasible, easily replicable, and valuable adjunct to the current curriculum that would enhance learner experience. This prospective, evidenced-based practice project was conducted in a single simulation center employing the American Burn Association's ABLS curriculum using HFHPS. Participants managed 7 separate simulated polytrauma and burn scenarios with resultant clinical complications. After training, participants completed written and practical examinations as well as satisfaction surveys. From 2012 to 2013, 71 students participated in this training. Simulation (ABLS-Sim) participants demonstrated a 2.5% increase in written post-test scores compared to traditional ABLS Provider Course (ABLS Live) (p=0.0016). There was no difference in the practical examination when comparing ABLS-Sim versus ABLS Live. Subjectively, 60 (85%) participants completed surveys. The Educational Practice Questionnaire showed best practices rating of 4.5±0.7; with importance of learning rated at 4.4±0.8. The Simulation Design Scale rating for design was 4.6±0.6 with an importance rating of 4.4±0.8. Overall Satisfaction and Self-Confidence with Learning were 4.4±0.7 and 4.5±0.7, respectfully. Integrating HFHPS with the current ABLS curriculum led to higher written exam scores, high levels of confidence, satisfaction, and active learning, and presented an evidenced-based model for education that is easily employable for other facilities nationwide. Copyright © 2018 Elsevier Ltd and ISBI. All rights reserved.

5 CFR 9701.337 - Treatment of employees whose rate of pay falls below the minimum adjusted rate of their band.

Code of Federal Regulations, 2011 CFR

2011-01-01

... falls below the minimum adjusted rate of their band. 9701.337 Section 9701.337 Administrative Personnel... Administration Locality and Special Rate Supplements § 9701.337 Treatment of employees whose rate of pay falls... (including a locality or special rate supplement) falls below the minimum adjusted rate of his or her band as...

5 CFR 9701.337 - Treatment of employees whose rate of pay falls below the minimum adjusted rate of their band.

Code of Federal Regulations, 2012 CFR

2012-01-01

... falls below the minimum adjusted rate of their band. 9701.337 Section 9701.337 Administrative Personnel... Administration Locality and Special Rate Supplements § 9701.337 Treatment of employees whose rate of pay falls... (including a locality or special rate supplement) falls below the minimum adjusted rate of his or her band as...

5 CFR 9701.337 - Treatment of employees whose rate of pay falls below the minimum adjusted rate of their band.

Code of Federal Regulations, 2014 CFR

2014-01-01

... falls below the minimum adjusted rate of their band. 9701.337 Section 9701.337 Administrative Personnel... Administration Locality and Special Rate Supplements § 9701.337 Treatment of employees whose rate of pay falls... (including a locality or special rate supplement) falls below the minimum adjusted rate of his or her band as...

5 CFR 9701.337 - Treatment of employees whose rate of pay falls below the minimum adjusted rate of their band.

Code of Federal Regulations, 2013 CFR

2013-01-01

... falls below the minimum adjusted rate of their band. 9701.337 Section 9701.337 Administrative Personnel... Administration Locality and Special Rate Supplements § 9701.337 Treatment of employees whose rate of pay falls... (including a locality or special rate supplement) falls below the minimum adjusted rate of his or her band as...

Validation of numerical simulations for nano-aluminum composite solid propellants

NASA Astrophysics Data System (ADS)

Yan, Allen H.

2011-12-01

Nano-aluminum is of interest as an energetic additive in composite solid propellant formulations for its demonstrated ability to increase combustion efficiency and burning rate. However, due to the current cost of nano-aluminum and the associated safety risks associated with propellant testing, it may not always be practical to spend the time and effort to mix, cast, and thoroughly evaluate the burning rate of a new formulation. To provide an alternative method of determining this parameter, numerical methods have been developed to predict the performance of nano-aluminum composite propellants, but these codes still require thorough validation before application. For this purpose, six propellant compositions were formulated, fully characterized, and burn rates were measured at several pressures between 34.0 and 129.3 atmospheres at room temperature, 20°C, and at an elevated temperature of 71.1°C in order to test the code's ability to predict pressure dependent burn rate and temperature sensitivity. To ensure the most accurate model possible, special emphasis was placed on characterizing the size distribution of the constituent nano-aluminum and ammonium perchlorate powders through optical diffraction or optical imaging techniques. Experimental burn rate is compared to the propellant combustion model and shows excellent agreement within 5% for a range of formulations and pressures, however under other conditions the model deviates by as much as 21%. An analysis of the results suggests that the current framework of the numerical model is unable to accurately simulate all the combustion physics of high aluminum content propellants, and suggestions for improvements are identified.

46 CFR 280.5 - Criteria for determining whether or not civilian preference cargo is carried at a premium rate.

Code of Federal Regulations, 2010 CFR

2010-10-01

... conference tariff or at the stated minimum level or floor rate for an open-rated commodity published in a..., stated minimum level, or floor rate has at least one foreign-flag carrier as a voting member, or (b) At a rate or tariff agreement rate, or at the stated minimum level or floor rate for an open-rated commodity...

Fossil fuel and biomass burning effect on climate - Heating or cooling?

NASA Technical Reports Server (NTRS)

Kaufman, Yoram J.; Fraser, Robert S.; Mahoney, Robert L.

1991-01-01

The basic theory of the effect of pollution on cloud microphysics and its global implications is applied to compare the relative effect of a small increase in the consumption rate of oil, coal, or biomass burning on cooling and heating of the atmosphere. The characteristics of and evidence for the SO2 induced cooling effect are reviewed. This perturbation analysis approach permits linearization, therefore simplifying the analysis and reducing the number of uncertain parameters. For biomass burning the analysis is restricted to burning associated with deforestation. Predictions of the effect of an increase in oil or coal burning show that within the present conditions the cooling effect from oil and coal burning may range from 0.4 to 8 times the heating effect.

40 CFR 63.6590 - What parts of my plant does this subpart cover?

Code of Federal Regulations, 2014 CFR

2014-07-01

...) Existing spark ignition 2 stroke lean burn (2SLB) stationary RICE with a site rating of more than 500 brake HP located at a major source of HAP emissions; (ii) Existing spark ignition 4 stroke lean burn (4SLB... emissions; (4) A new or reconstructed spark ignition 4 stroke rich burn (4SRB) stationary RICE with a site...

40 CFR 63.6590 - What parts of my plant does this subpart cover?

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Existing spark ignition 2 stroke lean burn (2SLB) stationary RICE with a site rating of more than 500 brake HP located at a major source of HAP emissions; (ii) Existing spark ignition 4 stroke lean burn (4SLB... emissions; (4) A new or reconstructed spark ignition 4 stroke rich burn (4SRB) stationary RICE with a site...

Evaluating alternative prescribed burning policies to reduce net economic damages from wildfire

Treesearch

D. Evan Mercer; Jeffrey P. Prestemon; David T. Butry; John M. Pye

2007-01-01

We estimate a wildfire risk model with a new measure of wildfire output, intensity-weighted risk and use it in Monte Carlo simulations to estimate welfare changes from alternative prescribed burning policies. Using Volusia County, Florida as a case study, an annual prescribed burning rate of 13% of all forest lands maximizes net welfare; ignoring the effects on...

Prescribed fire as the minimum tool for wilderness forest and fire regime restoration: a case study from the Sierra Nevada, California

Treesearch

MaryBeth Keifer; Nathan L. Stephenson; Jeff Manley

2000-01-01

Changes in forest structure were monitored in areas treated with prescribed fire in Sequoia and Kings Canyon National Parks. Five years after the initial prescribed fires, tree density was reduced by 61% in the giant sequoia-mixed conifer forest, with the greatest reduction in the smaller trees. This post-burn forest structure falls within the range that may have been...

The remarkable outburst of the highly evolved post-period-minimum dwarf nova SSS J122221.7-311525★

NASA Astrophysics Data System (ADS)

Neustroev, V. V.; Marsh, T. R.; Zharikov, S. V.; Knigge, C.; Kuulkers, E.; Osborne, J. P.; Page, K. L.; Steeghs, D.; Suleimanov, V. F.; Tovmassian, G.; Breedt, E.; Frebel, A.; García-Díaz, Ma. T.; Hambsch, F.-J.; Jacobson, H.; Parsons, S. G.; Ryu, T.; Sabin, L.; Sjoberg, G.; Miroshnichenko, A. S.; Reichart, D. E.; Haislip, J. B.; Ivarsen, K. M.; LaCluyze, A. P.; Moore, J. P.

2017-05-01

We report extensive 3-yr multiwavelength observations of the WZ Sge-type dwarf nova SSS J122221.7-311525 during its unusual double superoutburst, the following decline and in quiescence. The second segment of the superoutburst had a long duration of 33 d and a very gentle decline with a rate of 0.02 mag d-1, and it displayed an extended post-outburst decline lasting at least 500 d. Simultaneously with the start of the rapid fading from the superoutburst plateau, the system showed the appearance of a strong near-infrared excess resulting in very red colours, which reached extreme values (B - I ≃ 1.4) about 20 d later. The colours then became bluer again, but it took at least 250 d to acquire a stable level. Superhumps were clearly visible in the light curve from our very first time-resolved observations until at least 420 d after the rapid fading from the superoutburst. The spectroscopic and photometric data revealed an orbital period of 109.80 min and a fractional superhump period excess ≲0.8 per cent, indicating a very low mass ratio q ≲ 0.045. With such a small mass ratio the donor mass should be below the hydrogen-burning minimum mass limit. The observed infrared flux in quiescence is indeed much lower than is expected from a cataclysmic variable with a near-main-sequence donor star. This strongly suggests a brown-dwarf-like nature for the donor and that SSS J122221.7-311525 has already evolved away from the period minimum towards longer periods, with the donor now extremely dim.

Development of a Deterred Propellant for a Large Caliber Weapon System

DTIC Science & Technology

1982-06-02

with higher Toy’s than D)BP will require higher concentrations to achieve the sawm burning rate mi.ification. Camphor at the 13 percent "concentration...has about the same "’cv as DIP at 7.5 percent. Thus, for the same burn rate change, camphor would need about twice the concentration, as PBP at the

Infiltration and interrill erosion rates after a wildfire in western Montana, USA

Treesearch

Pete Robichaud; Joseph W. Wagenbrenner; Fredrick B. Pierson; Kenneth E. Spaeth; Louise E. Ashmun; Corey A. Moffet

2016-01-01

The 2000 Valley Complex wildfire burned in steep montane forests with ash cap soils in western Montana, USA. The effects of high soil burn severity on forest soil hydrologic function were examined using rainfall simulations (100mmh-1 for 1 h) on 0.5-m2 plots. Infiltration rates, sediment yields and sediment concentrations were compared among three treatments:...

The effect of wind on burning rate of wood cribs

Treesearch

Sara McAllister; Mark Finney

2016-01-01

Wood cribs are often used as ignition sources for room fire tests. A wood crib may also apply to studies of burning rate in wildland fires, because wildland fuel beds are porous and three dimensional. A unique aspect of wildland fires is the ubiquitous presence of wind. However, very little is known about what effect the increased ventilation has on the...

Effects of magnesium-based hydrogen storage materials on the thermal decomposition, burning rate, and explosive heat of ammonium perchlorate-based composite solid propellant.

PubMed

Liu, Leili; Li, Jie; Zhang, Lingyao; Tian, Siyu

2018-01-15

MgH 2 , Mg 2 NiH 4 , and Mg 2 CuH 3 were prepared, and their structure and hydrogen storage properties were determined through X-ray photoelectron spectroscopy and thermal analyzer. The effects of MgH 2 , Mg 2 NiH 4 , and Mg 2 CuH 3 on the thermal decomposition, burning rate, and explosive heat of ammonium perchlorate-based composite solid propellant were subsequently studied. Results indicated that MgH 2 , Mg 2 NiH 4 , and Mg 2 CuH 3 can decrease the thermal decomposition peak temperature and increase the total released heat of decomposition. These compounds can improve the effect of thermal decomposition of the propellant. The burning rates of the propellant increased using Mg-based hydrogen storage materials as promoter. The burning rates of the propellant also increased using MgH 2 instead of Al in the propellant, but its explosive heat was not enlarged. Nonetheless, the combustion heat of MgH 2 was higher than that of Al. A possible mechanism was thus proposed. Copyright © 2017. Published by Elsevier B.V.

Carbachol promotes gastrointestinal function during oral resuscitation of burn shock.

PubMed

Hu, Sen; Che, Jin-Wei; Tian, Yi-Jun; Sheng, Zhi-Yong

2011-04-07

To investigate the effect of carbachol on gastrointestinal function in a dog model of oral resuscitation for burn shock. Twenty Beagle dogs with intubation of the carotid artery, jugular vein and jejunum for 24 h were subjected to 35% total body surface area full-thickness burns, and were divided into three groups: no fluid resuscitation (NR, n = 10), in which animals did not receive fluid by any means in the first 24 h post-burn; oral fluid resuscitation (OR, n = 8), in which dogs were gavaged with glucose-electrolyte solution (GES) with volume and rate consistent with the Parkland formula; and oral fluid with carbachol group (OR/CAR, n = 8), in which dogs were gavaged with GES containing carbachol (20 μg/kg), with the same volume and rate as the OR group. Twenty-four hours after burns, all animals were given intravenous fluid replacement, and 72 h after injury, they received nutritional support. Hemodynamic and gastrointestinal parameters were measured serially with animals in conscious and cooperative state. The mean arterial pressure, cardiac output and plasma volume dropped markedly, and gastrointestinal tissue perfusion was reduced obviously after the burn injury in all the three groups. Hemodynamic parameters and gastrointestinal tissue perfusion in the OR and OR/CAR groups were promoted to pre-injury level at 48 and 72 h, respectively, while hemodynamic parameters in the NR group did not return to pre-injury level till 72 h, and gastrointestinal tissue perfusion remained lower than pre-injury level until 120 h post-burn. CO(2) of the gastric mucosa and intestinal mucosa blood flow of OR/CAR groups were 56.4 ± 4.7 mmHg and 157.7 ± 17.7 blood perfusion units (BPU) at 24 h post-burn, respectively, which were significantly superior to those in the OR group (65.8 ± 5.8 mmHg and 127.7 ± 11.9 BPU, respectively, all P < 0.05). Gastric emptying and intestinal absorption rates of GES were significantly reduced to the lowest level (52.8% and 23.7% of pre-injury levels) in the OR group at about 2 and 4 h post-burn, and did not return to 80% of pre-injury level until 24 h. In the first 24 h post-burn, the rate of gastric emptying and intestinal water absorption were elevated by a mean 15.7% and 11.5%, respectively, in the OR/CAR group compared with the OR group. At 5 days, the mortality in the NR group was 30% (3/10), 12.5% in the OR group (1/8), and none in the OR/CAR group. Carbachol had a beneficial effect on oral resuscitation of burn shock by promoting gastric emptying and intestinal absorption in our canine model.

[Current situation and reflection on the prevention and treatment of burns in the elderly].

PubMed

Zhang, J P; Huang, Y S

2017-09-20

With ageing of the population, it is estimated that the percentage of old people aged above 65 years old will be approached to 30% in China by 2035. This presents a considerable challenge to geriatric burn treatment, as elderly burn patients have more serious injuries, longer hospital lengths of stay, and higher rates of complications and mortality. In this article, we analyze the current status of burns in the elderly in China and the factors contributing to the outcome of the elderly, and put forward therapeutic strategies so as to improve the level of prevention and treatment of burns in the elderly.

Emerging Carbapenem-Resistant Pseudomonas aeruginosa Isolates Carrying blaIMP Among Burn Patients in Isfahan, Iran.

PubMed

Radan, Mohsen; Moniri, Rezvan; Khorshidi, Ahmad; Gilasi, Hamidreza; Norouzi, Zohreh; Beigi, Fahimeh; Dasteh Goli, Yasaman

2016-09-01

Metallo-β-lactamase (MBL)-producing Pseudomonas aeruginosa is a significant pathogen in burn patients. The aim of this study was to determine the prevalence of carbapenem-resistant P. aeruginosa isolates, including those resistant to imipenemase (IMP), in a burn unit in Isfahan, Iran. One hundred and fifty P. aeruginosa isolates from burn patients were tested for antibiotic susceptibility by the disc diffusion method in accordance with CLSI guidelines. Production of MBL was identified with the EDTA disk method. DNA was purified from the MBL-positive isolates, and detection of the bla IMP gene was performed with PCR. Fifty-seven out of 150 (38%) isolates were multi-drug resistant (MDR), and 93 (62%) were extensively-drug resistant (XDR). Among all isolates, the resistance rate to ciprofloxacin, tobramycin, imipenem, meropenem, amikacin, ceftazidime, and cefepime was higher than 90%, while the resistance rates to piperacillin/tazobactam and aztreonam were 70.7% and 86%, respectively. Colistin and polymyxin B remained the most effective studied antibiotics. All of the imipenem-resistant P. aeruginosa isolates were MBL-positive, and 107 out of 144 (74.3%) of the MBL isolates were positive for the bla IMP gene. The results of this study show that the rate of P. aeruginosa -caused burn wound infections was very high, and many of the isolates were resistant to three or more classes of antimicrobials. Such extensive resistance to antimicrobial classes is important because few treatment options remain for patients with burn wound infections. bla IMP -producing P. aeruginosa isolates are a rising threat in burn-care units, and should be controlled by conducting infection-control assessments.

Performance of Metal Cutting on Endmills Manufactured by Cooling-Air and Minimum Quantity Lubrication Grinding

NASA Astrophysics Data System (ADS)

Inoue, Shigeru; Aoyama, Tojiro

Grinding fluids have been commonly used during the grinding of tools for their cooling and lubricating effect since the hard, robust materials used for cutting tools are difficult to grind. Grinding fluids help prevent a drop in hardness due to burning of the cutting edge and keep chipping to an absolute minimum. However, there is a heightened awareness of the need to improve the work environment and protect the global environment. Thus, the present study is aimed at applying dry grinding, cooling-air grinding, cooling-air grinding with minimum quantity lubrication (MQL), and oil-based fluid grinding to manufacturing actual endmills (HSS-Co). Cutting tests were performed by a vertical machining center. The results indicated that the lowest surface inclination values and longest tool life were obtained by cooling-air grinding with MQL. Thus, cooling-air grinding with MQL has been demonstrated to be at least as effective as oil-based fluid grinding.

Stratified turbulent Bunsen flames: flame surface analysis and flame surface density modelling

NASA Astrophysics Data System (ADS)

Ramaekers, W. J. S.; van Oijen, J. A.; de Goey, L. P. H.

2012-12-01

In this paper it is investigated whether the Flame Surface Density (FSD) model, developed for turbulent premixed combustion, is also applicable to stratified flames. Direct Numerical Simulations (DNS) of turbulent stratified Bunsen flames have been carried out, using the Flamelet Generated Manifold (FGM) reduction method for reaction kinetics. Before examining the suitability of the FSD model, flame surfaces are characterized in terms of thickness, curvature and stratification. All flames are in the Thin Reaction Zones regime, and the maximum equivalence ratio range covers 0.1⩽φ⩽1.3. For all flames, local flame thicknesses correspond very well to those observed in stretchless, steady premixed flamelets. Extracted curvature radii and mixing length scales are significantly larger than the flame thickness, implying that the stratified flames all burn in a premixed mode. The remaining challenge is accounting for the large variation in (subfilter) mass burning rate. In this contribution, the FSD model is proven to be applicable for Large Eddy Simulations (LES) of stratified flames for the equivalence ratio range 0.1⩽φ⩽1.3. Subfilter mass burning rate variations are taken into account by a subfilter Probability Density Function (PDF) for the mixture fraction, on which the mass burning rate directly depends. A priori analysis point out that for small stratifications (0.4⩽φ⩽1.0), the replacement of the subfilter PDF (obtained from DNS data) by the corresponding Dirac function is appropriate. Integration of the Dirac function with the mass burning rate m=m(φ), can then adequately model the filtered mass burning rate obtained from filtered DNS data. For a larger stratification (0.1⩽φ⩽1.3), and filter widths up to ten flame thicknesses, a β-function for the subfilter PDF yields substantially better predictions than a Dirac function. Finally, inclusion of a simple algebraic model for the FSD resulted only in small additional deviations from DNS data, thereby rendering this approach promising for application in LES.

Bi-Component Droplet Combustion in Reduced Gravity

NASA Technical Reports Server (NTRS)

Shaw, Benjamin D.

2004-01-01

This research deals with reduced-gravity combustion of bi-component droplets initially in the mm size range or larger. The primary objectives of the research are to study the effects of droplet internal flows, thermal and solutal Marangoni stresses, and species volatility differences on liquid species transport and overall combustion phenomena (e.g., gas-phase unsteadiness, burning rates, sooting, radiation, and extinction). The research program utilizes a reduced gravity environment so that buoyancy effects are rendered negligible. Use of large droplets also facilitates visualization of droplet internal flows, which is important for this research. In the experiments, droplets composed of low- and high-volatility species are burned. The low-volatility components are initially present in small amounts. As combustion of a droplet proceeds, the liquid surface mass fraction of the low-volatility component will increase with time, resulting in a sudden and temporary decrease in droplet burning rates as the droplet rapidly heats to temperatures close to the boiling point of the low-volatility component. This decrease in burning rates causes a sudden and temporary contraction of the flame. The decrease in burning rates and the flame contraction can be observed experimentally. Measurements of burning rates as well as the onset time for flame contraction allow effective liquid-phase species diffusivities to be calculated, e.g., using asymptotic theory. It is planned that droplet internal flows will be visualized in flight and ground-based experiments. In this way, effective liquid species diffusivities can be related to droplet internal flow characteristics. This program is a continuation of extensive ground-based experimental and theoretical research on bi-component droplet combustion that has been ongoing for several years. The focal point of this program is a flight experiment (Bi-Component Droplet Combustion Experiment, BCDCE). This flight experiment is under development. However, supporting ground-based studies have been performed. Some of the most recent ground-based research is summarized.

Bi-Component Droplet Combustion in Reduced Gravity

NASA Technical Reports Server (NTRS)

Shaw, B. D.

2001-01-01

This research deals with reduced-gravity combustion of bi-component droplets initially in the mm size range or larger. The primary objectives of the research are to study the effects of droplet internal flows, thermal and solutal Marangoni stresses, and species volatility differences on liquid species transport and overall combustion phenomena (e.g., gas-phase unsteadiness, burning rates, sooting, radiation, and extinction). The research program utilizes a reduced-gravity environment so that buoyancy effects are rendered negligible. Use of large droplets also facilitates visualization of droplet internal flows, which is important for this research. In the experiments, droplets composed of low- and high-volatility species are burned. The low-volatility components are initially present in small amounts. As combustion of a droplet proceeds, the liquid surface mass fraction of the low-volatility component will increase with time, resulting in a sudden and temporary decrease in droplet burning rates as the droplet rapidly heats to temperatures close to the boiling point of the low-volatility component. This decrease in burning rates causes a sudden and temporary contraction of the flame. The decrease in burning rates and the flame contraction can be observed experimentally. Measurements of burning rates as well as the onset time for flame contraction allow effective liquid-phase species diffusivities to be calculated, e.g., using asymptotic theory. It is planned that droplet internal flows will be visualized in future flight and ground-based experiments. In this way, effective liquid species diffusivities can be related to droplet internal flow characteristics. This program is a continuation of extensive ground based experimental and theoretical research on bi-component droplet combustion that has been ongoing for several years. The focal point of this program is a flight experiment (Bi-Component Droplet Combustion Experiment, BCDCE). This flight experiment is under development. However, supporting studies have been performed. Because of space limitations, only some of the research performed over the last two years (since the 5th Microgravity Combustion Workshop) is summarized here.

Analysis of Spark-Ignition Engine Knock as Seen in Photographs Taken at 200,000 Frames Per Second

NASA Technical Reports Server (NTRS)

Miller, Cearcy D.; Olsen, H. Lowell; Logan, Walter O., Jr.; Osterstrom, Gordon E

1946-01-01

A motion picture of the development of knock in a spark-ignition engine, is presented, which consists of 20 photographs taken at intervals of 5 microseconds, or at a rate of 200,000 photographs a second, with an equivalent wide-open exposure time of 6.4 microseconds for each photograph. A motion picture of a complete combustion process, including the development of knock, taken at the rate of 40,000 photographs a second is also presented to assist the reader in orienting the photographs of the knock development taken at 200,000 frames per second. The photographs taken at 200,000 frames per second are analyzed and the conclusion is made that the type of knock in the spark-ignition engine involving violent gas vibration originates as self-propagating disturbance starting at a point in the.burn1ig or autoigniting gases and spreading out from that point through the incompletely burned gases at a rate as high as 6800 feet per second, or about twice the speed of sound in the burned gases. Apparent formation of free carbon particles in both the burning and the burned gas is observed within 10 microseconds after passage of the knock disturbance through the gases.

Decreasing burned children's pain behavior: impacting the trauma of hydrotherapy.

PubMed Central

Kelley, M L; Jarvie, G J; Middlebrook, J L; McNeer, M F; Drabman, R S

1984-01-01

We evaluated the effects of cartoon viewing with the use of a star feedback chart on two burned children's pain behavior during their physical therapy sessions. In addition, the degree to which the observational data corresponded with physical therapists' and mothers' ratings of the children's pain, fear, and cooperativeness was examined. Using a reversal single-subject design, the results showed that the children's pain behavior substantially decreased during experimental treatment sessions compared to their baseline levels. The rating scale data indicated that the physical therapist's and mother's rating of pain, anxiety, and cooperativeness were all correlated significantly with the observational data (p less than .05). The contributions of respondent and operant conditioning to the occurrence and treatment of pain behavior in burned children are discussed. PMID:6735948

Performance measures for lower gastrointestinal endoscopy: a European Society of Gastrointestinal Endoscopy (ESGE) quality improvement initiative

PubMed Central

Thomas-Gibson, Siwan; Bugajski, Marek; Bretthauer, Michael; Rees, Colin J; Dekker, Evelien; Hoff, Geir; Jover, Rodrigo; Suchanek, Stepan; Ferlitsch, Monika; Anderson, John; Roesch, Thomas; Hultcranz, Rolf; Racz, Istvan; Kuipers, Ernst J; Garborg, Kjetil; East, James E; Rupinski, Maciej; Seip, Birgitte; Bennett, Cathy; Senore, Carlo; Minozzi, Silvia; Bisschops, Raf; Domagk, Dirk; Valori, Roland; Spada, Cristiano; Hassan, Cesare; Dinis-Ribeiro, Mario; Rutter, Matthew D

2017-01-01

The European Society of Gastrointestinal Endoscopy and United European Gastroenterology present a short list of key performance measures for lower gastrointestinal endoscopy. We recommend that endoscopy services across Europe adopt the following seven key performance measures for lower gastrointestinal endoscopy for measurement and evaluation in daily practice at a center and endoscopist level: 1 rate of adequate bowel preparation (minimum standard 90%); 2 cecal intubation rate (minimum standard 90%); 3 adenoma detection rate (minimum standard 25%); 4 appropriate polypectomy technique (minimum standard 80%); 5 complication rate (minimum standard not set); 6 patient experience (minimum standard not set); 7 appropriate post-polypectomy surveillance recommendations (minimum standard not set). Other identified performance measures have been listed as less relevant based on an assessment of their importance, scientific acceptability, feasibility, usability, and comparison to competing measures. PMID:28507745

Modeling Skin Injury from Hot Spills on Clothing

PubMed Central

2017-01-01

The present work analyzes scald burns from hot beverages, such as coffee and tea, spilled on the lap, i.e., an incident that may occur in daily life. The Pennes bioheat equation is solved numerically for small spills wetting the clothing, i.e., the fabric prevents the spilled liquid from draining away. Temperatures are analyzed in the wetted fabric and the skin layers and the resulting skin injury is calculated based on the basal layer temperature. Parameters influencing burn severity, such as clothing thickness, liquid temperature, removal of fabric and thermal effects of post scald water cooling are analyzed. The fabric cools the water some but represents a threat since the entrapped water results in a prolonged heat supply. The liquid temperature turned out to be the most important injury parameter, where liquid temperature of about 80–85 °C seems to be a limit for developing superficial partial-thickness burns in the present minimum case, i.e., where the liquid just wets the fabric. Spilling water in excess of just wetting the fabric, more severe burns will develop at lower liquid temperatures due to the prolonged heat supply. Higher liquid temperatures will nearly instantly develop more severe burns. It is demonstrated that removal of the clothing within the first seconds after the spill may significantly reduce the scalding severity. The general advice is therefore to avoid excessive heating of beverages and, if the beverage is spilled, to quickly remove the wetted clothing. Prolonged tempered water cooling is advised to improve the healing processes. PMID:29137118

A prospective intra-individual evaluation of silk compared to Biobrane for the treatment of superficial burns of the hand and face.

PubMed

Schiefer, Jennifer Lynn; Arens, Elena; Grigutsch, Daniel; Rath, Rebekka; Hoffmann, Alexandra; Fuchs, Paul Christian; Schulz, Alexandra

2017-05-01

An ever-increasing number of commercially available dressings have been applied to treat superficial burns with the aim to reduce pain and inflammation and lead to a fast wound healing and scar reduction. Nevertheless the search for cheap and effective wound dressing proceeds. Dressilk ® consisting of silkworm silk showed good results for wound healing in regards to scarring, biocompatibility and reduction of inflammation and pain. Therefore it seemed to be an interesting product for the treatment of superficial burns. In a prospective intra-individual study the healing of superficial burns was evaluated after the treatment with Dressilk ® and Biobrane ® in 30 patients with burns of the hand and face. During wound healing pain, active bleeding, exudation, dressing change and inflammation were evaluated using the Verbal Rating Scale 1-10. Three months later scar appearance was assessed by VSS (Vancouver Scar Scale) and POSAS (Patient and Observer Scar Scale). With regard to re-epithelialization, pain, inflammation and acute bleeding both dressings were equivalent. High subjective satisfaction rates were reported for both Dressilk ® and Biobrane ® dressings in regard to comfort and mobility of the face. Biobrane ® , applied as a glove was subjectively preferred for burns of the hand. Regarding their cost efficiency Dressilk ® was clearly superior to Biobrane ® . Long-term results were similar. The "ideal" wound dressing maximizes patients' comfort while reducing pain and promoting wound healing. Dressilk ® and Biobrane ® both provided an effective and safe healing environment, showing low overall complication rates with respect to infection and exudation on superficial burns of the hand and face. Therefore Dressilk ® , being clearly superior to Biobrane ® in cost efficiency is an interesting alternative especially for the treatment of superficial burns of faces. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

High regression rate hybrid rocket fuel grains with helical port structures

NASA Astrophysics Data System (ADS)

Walker, Sean D.

Hybrid rockets are popular in the aerospace industry due to their storage safety, simplicity, and controllability during rocket motor burn. However, they produce fuel regression rates typically 25% lower than solid fuel motors of the same thrust level. These lowered regression rates produce unacceptably high oxidizer-to-fuel (O/F) ratios that produce a potential for motor instability, nozzle erosion, and reduced motor duty cycles. To achieve O/F ratios that produce acceptable combustion characteristics, traditional cylindrical fuel ports are fabricated with very long length-to-diameter ratios to increase the total burning area. These high aspect ratios produce further reduced fuel regression rate and thrust levels, poor volumetric efficiency, and a potential for lateral structural loading issues during high thrust burns. In place of traditional cylindrical fuel ports, it is proposed that by researching the effects of centrifugal flow patterns introduced by embedded helical fuel port structures, a significant increase in fuel regression rates can be observed. The benefits of increasing volumetric efficiencies by lengthening the internal flow path will also be observed. The mechanisms of this increased fuel regression rate are driven by enhancing surface skin friction and reducing the effect of boundary layer "blowing" to enhance convective heat transfer to the fuel surface. Preliminary results using additive manufacturing to fabricate hybrid rocket fuel grains from acrylonitrile-butadiene-styrene (ABS) with embedded helical fuel port structures have been obtained, with burn-rate amplifications up to 3.0x than that of cylindrical fuel ports.

Uncontrolled burning of solid waste by households in Mexico is a significant contributor to climate change in the country.

PubMed

Reyna-Bensusan, Natalia; Wilson, David C; Smith, Stephen R

2018-05-01

Uncontrolled burning of municipal solid waste (MSW) is an important source of air pollution and is wide spread in many developing countries, but only limited data quantify the extent of domestic open burning of household waste. Here, we present some of the first field data to be reported on the uncontrolled domestic burning of waste. A representative community of Mexico (Huejutla de Reyes Municipality) was investigated and household surveys, interviews with waste operators and a waste characterisation analysis were completed to assess the extent of, and factors controlling, the open burning of waste. Waste collection provision to rural communities was very limited and, consequently 92% of households in rural areas reported that they disposed of waste by uncontrolled burning in backyards or unofficial dumps. Overall, 24% of the total MSW generated in the Municipality was disposed by uncontrolled burning. Urban and periurban areas received twice-weekly collections and the rate of uncontrolled burning was considerably smaller compared to rural households, corresponding to approximately 2% of total waste generation. Carbon equivalency calculations showed that burning waste in backyards represented approximately 6% of the total and 8.5% of fuel related CO 2 Eq emissions by the municipality. Moreover, the equivalent carbon dioxide (CO 2 Eq) from black carbon (BC) emitted by uncontrolled burning in backyards was over fifteen times larger compared to methane (CH 4 ) potentially released from equivalent amounts of combustible biodegradable waste disposal at the official dumpsite. An assessment of local respiratory health data showed the incidence of disease was higher in rural than in urban areas, when the opposite trend is typically observed in the international literature; given the high rate of burning activity found in rural areas we suggest that open burning of waste could be a major reason for the apparent poorer respiratory health status of the rural population and requires further investigation. The results emphasise the importance of including BC from uncontrolled burning of waste in international emission inventories of greenhouse gases and in the assessment of the health status of local communities in developing countries where this practice is prevalent. Copyright © 2018 Elsevier Inc. All rights reserved.

Hospital solid waste management practices in Limpopo Province, South Africa: A case study of two hospitals

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nemathaga, Felicia; Maringa, Sally; Chimuka, Luke

2008-07-01

The shortcomings in the management practices of hospital solid waste in Limpopo Province of South Africa were studied by looking at two hospitals as case studies. Apart from field surveys, the generated hospital waste was weighed to compute the generation rates and was followed through various management practices to the final disposal. The findings revealed a major policy implementation gap between the national government and the hospitals. While modern practices such as landfill and incineration are used, their daily operations were not carried according to minimum standards. Incinerator ash is openly dumped and wastes are burned on landfills instead ofmore » being covered with soil. The incinerators used are also not environmentally friendly as they use old technology. The findings further revealed that there is no proper separation of wastes according to their classification as demanded by the national government. The mean percentage composition of the waste was found in the following decreasing order: general waste (60.74%) > medical waste (30.32%) > sharps (8.94%). The mean generation rates were found to be 0.60 kg per patient per day.« less

Can we explain the observed methane variability after the Mount Pinatubo eruption?

NASA Astrophysics Data System (ADS)

Bândă, N.; Krol, M.; van Weele, M.; van Noije, T.; Le Sager, P.; Röckmann, T.

2015-07-01

The CH4 growth rate in the atmosphere showed large variations after the Pinatubo eruption in June 1991. A decrease of more than 10 ppb yr-1 in the growth rate over the course of 1992 was reported and a partial recovery in the following year. Although several reasons have been proposed to explain the evolution of CH4 after the eruption, their contributions to the observed variations are not yet resolved. CH4 is removed from the atmosphere by the reaction with tropospheric OH, which in turn is produced by O3 photolysis under UV radiation. The CH4 removal after the Pinatubo eruption might have been affected by changes in tropospheric UV levels due to the presence of stratospheric SO2 and sulfate aerosols, and due to enhanced ozone depletion on Pinatubo aerosols. The perturbed climate after the eruption also altered both sources and sinks of atmospheric CH4. Furthermore, CH4 concentrations were influenced by other factors of natural variability in that period, such as ENSO and biomass burning events. Emissions of CO, NOX and NMVOCs also affected CH4 concentrations indirectly by influencing tropospheric OH levels. Potential drivers of CH4 variability are investigated using the TM5 global chemistry model. The contribution that each driver had to the global CH4 variability during the period 1990 to 1995 is quantified. We find that a decrease of 8-10 ppb yr-1 CH4 is explained by a combination of the above processes. However, the timing of the minimum growth rate is found 6-9 months later than observed. The long-term decrease in CH4 growth rate over the period 1990 to 1995 is well captured and can be attributed to an increase in OH concentrations over this time period. Potential uncertainties in our modelled CH4 growth rate include emissions of CH4 from wetlands, biomass burning emissions of CH4 and other compounds, biogenic NMVOC and the sensitivity of OH to NMVOC emission changes. Two inventories are used for CH4 emissions from wetlands, ORCHIDEE and LPJ, to investigate the role of uncertainties in these emissions. Although the higher climate sensitivity of ORCHIDEE improves the simulated CH4 growth rate change after Pinatubo, none of the two inventories properly captures the observed CH4 variability in this period.

Skin graft fixation in severe burns: use of topical negative pressure.

PubMed

Kamolz, L P; Lumenta, D B; Parvizi, D; Wiedner, M; Justich, I; Keck, M; Pfurtscheller, K; Schintler, M

2014-09-30

Over the last 50 years, the evolution of burn care has led to a significant decrease in mortality. The biggest impact on survival has been the change in the approach to burn surgery. Early excision and grafting has become a standard of care for the majority of patients with deep burns; the survival of a given patient suffering from major burns is invariably linked to the take rate and survival of skin grafts. The application of topical negative pressure (TNP) therapy devices has demonstrated improved graft take in comparison to conventional dressing methods alone. The aim of this study was to analyze the impact of TNP therapy on skin graft fixation in large burns. In all patients, we applied TNP dressings covering a %TBSA of >25. The following parameters were recorded and documented using BurnCase 3D: age, gender, %TBSA, burn depth, hospital length-of-stay, Baux score, survival, as well as duration and incidence of TNP dressings. After a burn depth adapted wound debridement, coverage was simultaneously performed using split-thickness skin grafts, which were fixed with staples and covered with fatty gauzes and TNP foam. The TNP foam was again fixed with staples to prevent displacement and finally covered with the supplied transparent adhesive film. A continuous subatmospheric pressure between 75-120 mm Hg was applied (VAC®, KCI, Vienna, Austria). The first dressing change was performed on day 4. Thirty-six out of 37 patients, suffering from full thickness burns, were discharged with complete wound closure; only one patient succumbed to their injuries. The overall skin graft take rate was over 95%. In conclusion, we consider that split thickness skin graft fixation by TNP is an efficient method in major burns, notably in areas with irregular wound surfaces or subject to movement (e.g. joint proximity), and is worth considering for the treatment of aged patients.

Foot burns: epidemiology and management.

PubMed

Hemington-Gorse, S; Pellard, S; Wilson-Jones, N; Potokar, T

2007-12-01

This is a retrospective study of the epidemiology and management of isolated foot burns presenting to the Welsh Centre for Burns from January 1998 to December 2002. A total of 289 were treated of which 233 were included in this study. Approximately 40% were in the paediatric age group and the gender distribution varied dramatically for adults and children. In the adult group the male:female ratio was 3.5:1, however in the paediatric group the male:female ratio was more equal (1.6:1). Scald burns (65%) formed the largest group in children and scald (35%) and chemical burns (32%) in adults. Foot burns have a complication rate of 18% and prolonged hospital stay. Complications include hypertrophic scarring, graft loss/delayed healing and wound infection. Although isolated foot burns represent a small body surface area, over half require treatment as in patients to allow for initial aggressive conservative management of elevation and regular wound cleansing to avoid complications. This study suggests a protocol for the initial acute management of foot burns. This protocol states immediate referral of all foot burns to a burn centre, admission of these burns for 24-48 h for elevation, regular wound cleansing with change of dressings and prophylactic antibiotics.

A review on application of nanofluid MQL in machining

NASA Astrophysics Data System (ADS)

Rifat, Mustafa; Rahman, Md. Habibor; Das, Debashish

2017-12-01

Heat generation is an inevitable phenomenon during machining. To eradicate heat oriented detrimental effects like surface burning, tool wear and so on-different types of cooling system are being used. Traditional flood cooling method is the most widely used technique; however the consumption rate of coolant is very high. Moreover, if it is not deposited or recycled properly, it may also cause environmental hazard. Minimum Quantity Lubrication (MQL), on the other hand, sprays lubricant which decreases the frictional force and heat produced during machining. Nanofluid MQL is the incorporation of especially engineered nanoparticles into the lubricant that increases the heat carrying capacity. In this paper, four manufacturing processes (grinding, turning, milling, and drilling) and the effect of using nanofluid MQL in them are studied and summarized. Parameters that are considered in this study are cutting force, surface roughness, machining temperature, tool wear and environmental aspects. It can be observed that using nanofluids in an optimized manner can be beneficial to the machining processes because of their superior characteristics.

In view of standardization: comparison and analysis of initial management of severely burned patients in Germany, Austria and Switzerland.

PubMed

Münzberg, Matthias; Ziegler, Benjamin; Fischer, Sebastian; Wölfl, Christoph Georg; Grützner, Paul Alfred; Kremer, Thomas; Kneser, Ulrich; Hirche, Christoph

2015-02-01

Initial treatment of severely injured patients in German speaking trauma centers follows precise sequences. Several guidelines and training courses ensure a constant quality in providing evidence-based treatment for these patients. Similar standards, algorithms and guidelines for the treatment of severely burned patients are lacking. This raises the question about the current standard of care for burn victims in German speaking burn centers. In order to achieve standardization, as a first step this study surveys principles of burn room organization and management in these burn centers. A questionnaire including 40 questions regarding burn room organization, personnel structure and qualification, infrastructural conditions and quality management was developed and sent to 21 level one burn centers in Germany, Austria and Switzerland. The rate of returned questionnaires was 81%. The analysis revealed varying personnel and infrastructural conditions in participating burn centers. Indications for admission to the burn room and admission procedures itself are different throughout surveyed hospitals. Individual standard operating procedure (SOP) for burn trauma admissions was available in most burn centers and nearly all participants register their burn trauma cases using an in-house burn register. The survey suggests a lack of standardization in personnel structure, infrastructure and treatment approach for the initial clinical care of severely burned patients in burn centers across the German speaking countries. Further evaluation of existing protocols and international standards in burn care is inevitable to develop standardized guidelines for burn care and to improve quality of care. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Childhood burns: an analysis of 124 admissions in the Gaza Strip

PubMed Central

Elsous, A.; Salah, M.; Ouda, M.

2015-01-01

Summary Burns are a serious public health problem among paediatrics. Little is known about the epidemiological profile and outcomes of hospitalized paediatric burns in the Gaza Strip. A cross-sectional retrospective review was conducted of medical records of patients aged 15 years and below, admitted to the Al Alamy burn centre in the Al Shifa Medical Complex from 30 June, 2013 to 01 July, 2014. There were 189 admissions; 124 (65.6%) of them were below 15 years, their mean age ± SD being 4.02 ± 2.85 years. 72 of these cases (58.1%) were males, giving a male to female ratio of 1.6:1. 89.5% of the injuries were accidents and 96% were home-located. Scalds, which were a common cause of burns, represented 83.9% of cases. Mean TBSA was 10.72 ± 8.15%: half of the patients (50.8%) sustained second-degree burns, while 34.7% were a mix of second- and third-degree. Mean length of hospital stay was 10.23 ± 10.60 days. Only two children died during the study period, giving a case fatality rate and total mortality rate of 1.6% and 1.0% respectively. In conclusion, there is a need to focus on home safety and parents’ education as a means of reducing childhood burns. PMID:27777545

Facile Thermal and Optical Ignition of Silicon Nanoparticles and Micron Particles.

PubMed

Huang, Sidi; Parimi, Venkata Sharat; Deng, Sili; Lingamneni, Srilakshmi; Zheng, Xiaolin

2017-10-11

Silicon (Si) particles are widely utilized as high-capacity electrodes for Li-ion batteries, elements for thermoelectric devices, agents for bioimaging and therapy, and many other applications. However, Si particles can ignite and burn in air at elevated temperatures or under intense illumination. This poses potential safety hazards when handling, storing, and utilizing these particles for those applications. In order to avoid the problem of accidental ignition, it is critical to quantify the ignition properties of Si particles such as their sizes and porosities. To do so, we first used differential scanning calorimetry to experimentally determine the reaction onset temperature of Si particles under slow heating rates (∼0.33 K/s). We found that the reaction onset temperature of Si particles increased with the particle diameter from 805 °C at 20-30 nm to 935 °C at 1-5 μm. Then, we used a xenon (Xe) flash lamp to ignite Si particles under fast heating rates (∼10 3 to 10 6 K/s) and measured the minimum ignition radiant fluence (i.e., the radiant energy per unit surface area of Si particle beds required for ignition). We found that the measured minimum ignition radiant fluence decreased with decreasing Si particle size and was most sensitive to the porosity of the Si particle bed. These trends for the Xe flash ignition experiments were also confirmed by our one-dimensional unsteady simulation to model the heat transfer process. The quantitative information on Si particle ignition included in this Letter will guide the safe handling, storage, and utilization of Si particles for diverse applications and prevent unwanted fire hazards.

20 CFR 229.41 - When a spouse can no longer be included in computing an annuity rate under the overall minimum.

Code of Federal Regulations, 2010 CFR

2010-04-01

... RETIREMENT BOARD REGULATIONS UNDER THE RAILROAD RETIREMENT ACT SOCIAL SECURITY OVERALL MINIMUM GUARANTEE When... annuity rate under the overall minimum. A spouse's inclusion in the computation of the overall minimum...

Description of Streptococcus pneumoniae Infections in Burn Patients

DTIC Science & Technology

2010-01-01

Description of Streptococcus pneumoniae infections in burn patients§ Jessie S. Glasser a, Michael L. Landruma,b,c, Kevin K. Chung a,d, Duane R...Staphylococcus aureus. Although Streptococcus pneumoniae infections are common in the community and can cause nosocomial infections , the incidence and...risk factors for pneu- mococcal infections in burn patients is unclear. Methods: We performed an electronic retrospective chart review to collect rates

5 CFR 532.205 - The use of Federal, State, and local minimum wage requirements in determining prevailing rates.

Code of Federal Regulations, 2010 CFR

2010-01-01

... minimum wage requirements in determining prevailing rates. 532.205 Section 532.205 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Prevailing Rate Determinations § 532.205 The use of Federal, State, and local minimum wage requirements in determining prevailing...

77 FR 75896 - Alcohol and Drug Testing: Determination of Minimum Random Testing Rates for 2013

Federal Register 2010, 2011, 2012, 2013, 2014

2012-12-26

...-11213, Notice No. 16] Alcohol and Drug Testing: Determination of Minimum Random Testing Rates for 2013... from FRA's Management Information System, the rail industry's random drug testing positive rate has... therefore determined that the minimum annual random drug testing rate for the period January 1, 2013...

The Effect of Minimum Wage Rates on High School Completion

ERIC Educational Resources Information Center

Warren, John Robert; Hamrock, Caitlin

2010-01-01

Does increasing the minimum wage reduce the high school completion rate? Previous research has suffered from (1. narrow time horizons, (2. potentially inadequate measures of states' high school completion rates, and (3. potentially inadequate measures of minimum wage rates. Overcoming each of these limitations, we analyze the impact of changes in…

Comparison Between Civilian Burns and Combat burns From Operation Iraqi Freedom and Operation Enduring Freedom

DTIC Science & Technology

2006-06-01

to the average burn size reported from the ABA Burn Registry in 1995 (14% TBSA).20 We also found that the time to death in those who died, time on...after a prolonged stay in theater (up to 30 days, COL (retired) Basil A. Pruitt, personal commu- nication). They found a mortality rate of 7.9% in...from the green books that you know about. When we have that, we may be able to make that same comparison from the Vietnam era. DR. BASIL A. PRUITT, JR

Demographic and circumstantial accounts of burn mortality in Cape Town, South Africa, 2001-2004: An observational register based study

PubMed Central

Van Niekerk, A; Laubscher, R; Laflamme, L

2009-01-01

Background Burns are a persisting public health problem in low- and middle-income countries; however, epidemiologic data for these settings is scarce. South Africa is no exception although there is an emerging knowledge base, especially for paediatric burns. The current study describes the epidemiology of burn mortality across the lifespan in Cape Town (2.9 million inhabitants in 2001), one of the six South African metropolitan centres. Methods The distribution of burn mortality across socio-demographic groups and also their circumstances of occurrence were investigated using four year (2001 to 2004) surveillance data from the National Injury Mortality Surveillance System (n = 1024 cases). Results Burn mortality occurred at a rate of 7.9 per 100 000 person-years (95% CI: 7.3-8.3). Males sustained fatal rates 2.2 times more than that for females (p < 0.001), with rates significantly higher in the 25 to 38 and 39 to 50 age groups than at other ages (p < 0.001). The greatest difference between male and female deaths was observed in the 25 to 38 year age group, when almost three male deaths occurred for every female one. The vast majority of fatal burns were registered as accidental and occurred in the home, either over the cold and wet months or during recreational periods over weekends and across the year. Alcohol intoxication was reported for the majority of those adults whose alcohol blood levels were tested (i.e. 52.6% of cases aged 16+ years). Conclusion Besides paediatric burns, the high prevalence and circumstances of occurrence of burns among middle age men are a source of concern. There are reasons to believe that this over-representation is a reflection of detrimental living conditions, life-style and poor socio-economic status. It is recommended that there be greater prioritisation of prevention activities that involve the control or management of kerosene heat sources, the provision of alternatives to flammable housing materials, and the implementation of strategies to reduce harmful drinking practices. PMID:19804652

Fire Hazards from Combustible Ammunition, Methodology Development. Phase I

DTIC Science & Technology

1980-06-01

5.3 Flame Length , Flame Diameter and Mass Burning Rate 37 5.4 Flame Emissive Power 41 5.5 Fire Plume Axial Gas Velocity 41 5.6 Flame Temperature...B.2 Exit Velocity 93 B.3 Rate of Energy Flow 93 B.4 Chamber Characteristics 94 B.5 Flame Length 95 B.6 Flame Lift Angle 95 B.7 Summary 97...Viewing Flame in Test Series 5 17. Flame Length Scaling 18. Scaling Trends for Mass Burning Rate 19. Effective Flame Emissive Power versus Flame

Problem Definition Study: Lead Beta-Resorcylate

DTIC Science & Technology

1979-02-01

unless so desig- nated by other authorized documents. -3- »SUMMARY Lead ß-resorcylate is used as a burning rate modifier in solid propel- lant... sediment and biota 3. Acute mammalian toxicity study 4. Chronic mammalian toxicity study 5. Determine the effectiveness of proposed treatment...burning rate moderator in solvent and solventless double base propellents. This salt enters the environment in the wastewater generated during the

Synthesis of ethylene diamine-based ferrocene terminated dendrimers and their application as burning rate catalysts.

PubMed

Zain-Ul-Abdin; Wang, Li; Yu, Haojie; Saleem, Muhammad; Akram, Muhammad; Khalid, Hamad; Abbasi, Nasir M; Yang, Xianpeng

2017-02-01

Ferrocene-based derivatives are widely used as ferrocene-based burning rate catalysts (BRCs) for ammonium perchlorate (AP)-based propellant. However, in long storage, small ferrocene-based derivatives migrate to the surface of the propellant, which results in changes in the designed burning parameters and finally causes unstable combustion. To retard the migration of ferrocene-based BRCs in the propellant and to increase the combustion of the solid propellant, zero to third generation ethylene diamine-based ferrocene terminated dendrimers (0G, 1G, 2G and 3G) were synthesized. The synthesis of these dendrimers was confirmed by 1 H NMR and FT-IR spectroscopy. The electrochemical behavior of 0G, 1G, 2G and 3G was investigated by cyclic voltammetry (CV) and the burning rate catalytic activity of 0G, 1G, 2G and 3G on thermal disintegration of AP was examined by thermogravimetry (TG) and differential thermogravimetry (DTG) techniques. Anti-migration studies show that 1G, 2G and 3G exhibit improved anti-migration behavior in the AP-based propellant. Copyright © 2016 Elsevier Inc. All rights reserved.

Maternal burn-out: an exploratory study.

PubMed

Séjourné, N; Sanchez-Rodriguez, R; Leboullenger, A; Callahan, S

2018-02-21

Maternal burn-out is a psychological, emotional and physiological condition resulting from the accumulation of various stressors characterised by a moderate but also a chronic and repetitive dimension. Little research has focused on this syndrome. The current study aims to assess maternal burn-out rate and to identify factors associated with this state of exhaustion. 263 French mothers aged between 20 and 49 years answered five scales quantifying maternal burn-out, perceived social support, parental stress, depression and anxiety symptoms and history of postnatal depression. About 20% of mothers were affected by maternal burn-out. The main factors related to maternal burn-out were having a child perceived as difficult, history of postnatal depression, anxiety, satisfaction of a balance between professional and personal life and parental stress. This research shows the need for further work on maternal burn-out to better understand and prevent this syndrome.

The effect of preexisting respiratory co-morbidities on burn outcomes☆

PubMed Central

Knowlin, Laquanda T.; Stanford, Lindsay B.; Cairns, Bruce A.; Charles, Anthony G.

2018-01-01

Introduction Burns cause physiologic changes in multiple organ systems in the body. Burn mortality is usually attributable to pulmonary complications, which can occur in up to 41% of patients admitted to the hospital after burn. Patients with preexisting comorbidities such as chronic lung diseases may be more susceptible. We therefore sought to examine the impact of preexisting respiratory disease on burn outcomes. Methods A retrospective analysis of patients admitted to a regional burn center from 2002–2012. Independent variables analyzed included basic demographics, burn mechanism, presence of inhalation injury, TBSA, pre-existing comorbidities, smoker status, length of hospital stay, and days of mechanical ventilation. Bivariate analysis was performed and Cox regression modeling using significant variables was utilized to estimate hazard of progression to mechanical ventilation and mortality. Results There were a total of 7640 patients over the study period. Overall survival rate was 96%. 8% (n=672) had a preexisting respiratory disease. Chronic lung disease patients had a higher mortality rate (7%) compared to those without lung disease (4%, p<0.01). The adjusted Cox regression model to estimate the hazard of progression to mechanical ventilation in patients with respiratory disease was 21% higher compared to those without respiratory disease (HR=1.21, 95% CI=1.01–1.44). The hazard of progression to mortality is 56% higher (HR=1.56, 95% CI=1.10–2.19) for patients with pre-existing respiratory disease compared to those without respiratory disease after controlling for patient demographics and injury characteristics. Conclusion Preexisting chronic respiratory disease significantly increases the hazard of progression to mechanical ventilation and mortality in patients following burn. Given the increasing number of Americans with chronic respiratory diseases, there will likely be a greater number of individuals at risk for worse outcomes following burn. PMID:28341260

The effect of preexisting respiratory co-morbidities on burn outcomes.

PubMed

Knowlin, Laquanda T; Stanford, Lindsay B; Cairns, Bruce A; Charles, Anthony G

2017-03-01

Burns cause physiologic changes in multiple organ systems in the body. Burn mortality is usually attributable to pulmonary complications, which can occur in up to 41% of patients admitted to the hospital after burn. Patients with preexisting comorbidities such as chronic lung diseases may be more susceptible. We therefore sought to examine the impact of preexisting respiratory disease on burn outcomes. A retrospective analysis of patients admitted to a regional burn center from 2002-2012. Independent variables analyzed included basic demographics, burn mechanism, presence of inhalation injury, TBSA, pre-existing comorbidities, smoker status, length of hospital stay, and days of mechanical ventilation. Bivariate analysis was performed and Cox regression modeling using significant variables was utilized to estimate hazard of progression to mechanical ventilation and mortality. There were a total of 7640 patients over the study period. Overall survival rate was 96%. 8% (n=672) had a preexisting respiratory disease. Chronic lung disease patients had a higher mortality rate (7%) compared to those without lung disease (4%, p<0.01). The adjusted Cox regression model to estimate the hazard of progression to mechanical ventilation in patients with respiratory disease was 21% higher compared to those without respiratory disease (HR=1.21, 95% CI=1.01-1.44). The hazard of progression to mortality is 56% higher (HR=1.56, 95% CI=1.10-2.19) for patients with pre-existing respiratory disease compared to those without respiratory disease after controlling for patient demographics and injury characteristics. Preexisting chronic respiratory disease significantly increases the hazard of progression to mechanical ventilation and mortality in patients following burn. Given the increasing number of Americans with chronic respiratory diseases, there will likely be a greater number of individuals at risk for worse outcomes following burn. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

A review of burns patients admitted to the Burns Unit of Hospital Universiti Kebangsaan Malaysia.

PubMed

Chan, K Y; Hairol, O; Imtiaz, H; Zailani, M; Kumar, S; Somasundaram, S; Nasir-Zahari, M

2002-12-01

This is a retrospective review of 110 patients admitted to the Burns Units between October 1999 and November 2001. The aim was to determine the burns pattern of patients admitted to hospital UKM. There was an increasing trend for patients admitted. Female to male ratio was 1:2. Children consisted 34% of the total admission. Children had significant higher number of scald burns as compare to adult (p < 0.01). Domestic burns were consist of 75% overall admission. Mean percentage of TBSA (total body surface area) burns was 19%. Thirty percent of patients sustained more than 20% of TBSA. Sixty percent of patients had scald burns. Ninety percents of patients with second degree burns that were treated with biologic membrane dressing or split skin graft. Mean duration of hospital stay was 10 days. Over 70% of patients were discharged within 15 days. Overall mortality rate was 6.3%. The patients who died had significantly larger area of burns of more than 20% TBSA (p < 0.05) and a higher incidence of inhalation injury (p < 0.02). Hence, this study suggests a need for better preventive measures by the authority to prevent burns related accident and the expansion of the service provided by the Burns Unit.

Evidence of erosive burning in shuttle solid rocket motor

NASA Technical Reports Server (NTRS)

Martin, C. L.

1983-01-01

Known models of Shuttle Solid Rocket Motor (SRM) performance have failed to produce pressure-time traces which accurately matched actual motor performance, especially during the first 5 seconds after ignition and during the last quarter of web burn time. Efforts to compensate for these differences in model reconstruction and actual performance resulted in resorting to the use of a Burning Anomaly Rate Function (BARF). It was suspected that propellant erosive burning was primarily responsible for the variation of model from actual results. The three dimensional Hercules Grain Design and Internal Ballistics Evaluation Program was made operational and slightly modified and an extensive trial and error effort was begun to test the hypothesis of erosive burning as an explanation of the burning anomaly. It was found that introduction of erosive burning (using Green's erosive burning equation) over portions of the aft segment grain and above a threshold gas Mach number did, in fact, give excellent agreement with the actual motor trace.

Historic American Buildings Survey, A.S. Burns, Photographer December, 1933 TOLL ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

Historic American Buildings Survey, A.S. Burns, Photographer December, 1933 TOLL HOUSE (DETAIL OF PLAQUE SHOWING TOLL RATES) - Structures on Old National Trail, Toll House, U.S. Route 40, Pittsburgh, Allegheny County, PA

Formulation, optimization and evaluation of curcumin-β-cyclodextrin-loaded sponge for effective drug delivery in thermal burns chemotherapy.

PubMed

Kaur, Navdeep; Garg, Tarun; Goyal, Amit K; Rath, Goutam

2016-09-01

The present study was designed to determine the role of curcumin-β-cyclodextrin-loaded sponge on burn wound healing in rats. Curcumin-β-cyclodextrin complex was prepared by the solvent evaporation encapsulation method. Molecular inclusion complex of curcumin-β-cyclodextrin was incorporated into gelatin sponge. The developed sponge was characterized for drug entrapment, drug release and morphology. The biological activity of optimized formulation was determined on burn wounds which were made on rats. The burn wound healing efficacy was analyzed through physical and histological changes observed at the wound sites. There was a significant decrease in rate of wound contraction in experimental groups then the control group. Curcumin-β-cyclodextrin-loaded sponge treated wound was found to heal in rate comparable to marketed formulation with no sign of adverse consequence. The result clearly substantiates the beneficial effects of curcumin-β-cyclodextrin-loaded sponge in the acceleration of wound healing.

Combustion of Micro- and Nanothermites under Elevating Pressure

NASA Astrophysics Data System (ADS)

Monogarov, K.; Pivkina, Alla; Muravyev, N.; Meerov, D.; Dilhan, D.

Non-equilibrium process of combustion-wave propagation of thermite compositions (Mg/Fe2O3) inside the sealed steel tube have been investigated to study the burning rate at elevating pressure. Under confinement the hot gas-phase products, formed during thermite combustion result in considerable overpressure inside the tube that reverses the gas flow and leads to pressure-driven preheating effect of the burned-gas permeation. Convective origin of this preheating effect is discussed. The pressure-time dependency is obtained experimentally. The composition was pressed inside the steel tube in pellets; the size of each part was measured to obtain burning rate - pressure dependency. Both micro- and nanosized components were used to prepare thermite compositions under study. The significant difference in burning parameters of micron- and nanosized thermites is observed and analyzed. Based on obtained results, the combustion mechanism of thermites with the micro- and nanosized components is discussed.

Facial burns in children: a series analysis with implications for resuscitation and forensic odontology.

PubMed

Acton, C; Nixon, J; Pearn, J; Williams, D; Leditschke, F

1999-03-01

This study comprises a continuous (1981-1995) unselected series of all children who died from thermal injuries in the State of Queensland, Australia. One hundred and six children, so identified, died from incineration (35 per cent), respiratory burns with smoke or carbon monoxide inhalation (33 per cent), body surface area burns comprising greater than 60 per cent (9 per cent) and electrocution (20 per cent). The burn fatality rate was 0.98 per hundred thousand children (0-14 years) per year, with no secular trend and, specifically, no reduction in the annual rate of such fatalities. Eighty-two children (49 males) had concomitant facial injuries, both thermal and nonthermal; of whom 55 per cent were under the age of five years. Sixty (73 per cent) child burn victims died in house fires. Forensic odontology is important in confirming the age of such victims in single incinerations but is of limited value when larger numbers of children are incinerated, because of the relative lack of dental restorations in the infant and pre-school age group. Of the 82 children with facial and airway injuries, 12 per cent had only mild or superficial facial damage and only seven (8 per cent) were alive or resuscitable at the time of rescue from the conflagration or burning injury. child deaths from burns contributed an annual loss rate of 506 years of potential life lost (YPLL) in a population of 3 million of whom 21.5 per cent were children under the age of 15 years. Airway management and resuscitation, in the context of managing surviving burn victims of any age with facial injuries, pose special difficulties. Inhalational burns (smoke and the gases of conflagration) result in a mortality greater than 60 per cent. Although 81 per cent of children showed evidence of airway obstruction, analysis of current data indicates that a maximum of 8 per cent could have survived with airway maintenance and protection. Inhalational burns (to both upper and lower airways) grossly reduce survivability. Primary prevention would seem vital and thus remains a major challenge to reduce the incidence of such deaths. Some strategies include advocacy to promote the compulsory installation of smoke alarms, family drills to practise escape and the teaching of 'first aid for all'

Burns in South Korea: An analysis of nationwide data from the Health Insurance Review and Assessment Service.

PubMed

Oh, Hyunjin; Boo, Sunjoo

2016-05-01

The purpose of the study was to identify and describe the incidence of burn injuries in patients seen and treated in South Korea. Characteristics of inpatients and outpatients with burns were analyzed according to gender, age, burn site, and burn severity. This retrospective study examined the characteristics of a stratified sample of burn patients seen and treated in South Korea during the calendar year 2011. The sample was drawn from the national patient database Health Insurance Review and Assessment (HIRA). Approximately 1.71% of the total patients in the Patient Sample of HIRA for 2011 were burn-injured patients. The numbers of patients treated for burns were 913/10(5) males (n=8009) and 1454/10(5) females (n=11,881). Nearly all of these patients (94.1%) were covered by national health insurance and the majority of these patients (80.6%) were treated as outpatients. Nearly half of the burn injuries were of the upper extremities (43.5%), and most of these injuries (71.5%) were rated as second-degree burns. A review of the national data on patients seen and treated for burns in 2011 revealed that people in South Korea may experience higher numbers and more severe cases of burns and burn-related injuries than found in other countries. General burn prevention programs as well as gender- and age-specific prevention strategies are needed to reduce the risk of burns in this population. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Improved Survival of Patients With Extensive Burns: Trends in Patient Characteristics and Mortality Among Burn Patients in a Tertiary Care Burn Facility, 2004-2013.

PubMed

Strassle, Paula D; Williams, Felicia N; Napravnik, Sonia; van Duin, David; Weber, David J; Charles, Anthony; Cairns, Bruce A; Jones, Samuel W

Classic determinants of burn mortality are age, burn size, and the presence of inhalation injury. Our objective was to describe temporal trends in patient and burn characteristics, inpatient mortality, and the relationship between these characteristics and inpatient mortality over time. All patients aged 18 years or older and admitted with burn injury, including inhalation injury only, between 2004 and 2013 were included. Adjusted Cox proportional hazards regression models were used to estimate the relationship between admit year and inpatient mortality. A total of 5540 patients were admitted between 2004 and 2013. Significant differences in sex, race/ethnicity, burn mechanisms, TBSA, inhalation injury, and inpatient mortality were observed across calendar years. Patients admitted between 2011 and 2013 were more likely to be women, non-Hispanic Caucasian, with smaller burn size, and less likely to have an inhalation injury, in comparison with patients admitted from 2004 to 2010. After controlling for patient demographics, burn mechanisms, and differential lengths of stay, no calendar year trends in inpatient mortality were detected. However, a significant decrease in inpatient mortality was observed among patients with extensive burns (≥75% TBSA) in more recent calendar years. This large, tertiary care referral burn center has maintained low inpatient mortality rates among burn patients over the past 10 years. While observed decreases in mortality during this time are largely due to changes in patient and burn characteristics, survival among patients with extensive burns has improved.

Epidemiology and outcome of burns at the Saud Al Babtain Burns, Plastic Surgery and Reconstructive Center, Kuwait: our experience over five years (from 2006 to 2010)

PubMed Central

Khashaba, H.A.; Al-Fadhli, A.N.; Al-Tarrah, K.S.; Wilson, Y.T.; Moiemen, N.

2012-01-01

Summary Aim To determine the epidemiology and clinical presentation, and any contributing factors responsible for burns and outcome of care in Kuwait over the 5-yr period January 2006 to December 2010. Patients and methods. The study reviewed 1702 burn patients admitted over the study period to the Saud Al Babtain Burns, Plastic and Reconstructive Surgery Center, Kuwait. Patient characteristics, including age, sex, type of burn, nationality, total body surface area (TBSA) burn, hospital stay in days, and mortality were recorded. Results. Seventy-one per cent of the 1702 burn patients admitted were males; 540 were children. The majority of patients (64%) had less than 15% TBSA burns and only 14% had more than 50% TBSA burns. Flame burns were the most common cause of burn injuries (60%), followed by scalds (29%). Scalds were most common in children. The mortality rate was 5.75%. Flame burn was the leading cause of mortality. Lethal dose 50 (% TBSA at which a certain group has a 50% chance of survival) for adults (16-40 yr) and for the elderly (>65 yr) was 76.5% and 41.8% TBSA respectively. Conclusion. Burn injury is an important public health concern and is associated with high morbidity and mortality. Flame and scald burns are commonly a result of domestic and occupational accidents and they are preventable. Effective initial resuscitation, infection control, and adequate surgical treatment improve outcomes. PMID:23766750

Effect of tank diameter on thermal behavior of gasoline and diesel storage tanks fires.

PubMed

Leite, Ricardo Machado; Centeno, Felipe Roman

2018-01-15

Studies on fire behavior are extremely important as they contribute in a firefighting situation or even to avoid such hazard. Experimental studies of fire in real scale are unfeasible, implying that reduced-scale experiments must be performed, and results extrapolated to the range of interest. This research aims to experimentally study the fire behavior in tanks of 0.04m, 0.20m, 0.40m, 0.80m and 4.28m diameter, burning regular gasoline or diesel oil S-500. The following parameters were here obtained: burning rates, burning velocities, heat release rates, flame heights, and temperature distributions adjacent to the tank. Such parameters were obtained for each tank diameter with the purpose of correlating the results and understanding the relationship of each parameter for the different geometrical scale of the tanks. Asymptotic results for larger tanks were found as (regular gasoline and diesel oil S-500, respectively): burning rates 0.050kg/(m 2 s) and 0.031kg/(m 2 s), burning velocities 4.0mm/min and 2.5mm/min, heat release rates per unit area 2200kW/m 2 and 1500kW/m 2 , normalized averaged flame heights (H i /D, where H i is the average flame height, D is the tank diameter) 0.9 and 0.8. Maximum temperatures for gasoline pools were higher than for diesel oil pools, and temperature gradients close to the tanks were also higher for the former fuel. The behavior of the maximum temperature was correlated as a function of the tank diameter, the heat release rate of each fuel and the dimensionless distance from the tank. Copyright © 2017 Elsevier B.V. All rights reserved.

A One-Dimensional Global-Scaling Erosive Burning Model Informed by Blowing Wall Turbulence

NASA Technical Reports Server (NTRS)

Kibbey, Timothy P.

2014-01-01

A derivation of turbulent flow parameters, combined with data from erosive burning test motors and blowing wall tests results in erosive burning model candidates useful in one-dimensional internal ballistics analysis capable of scaling across wide ranges of motor size. The real-time burn rate data comes from three test campaigns of subscale segmented solid rocket motors tested at two facilities. The flow theory admits the important effect of the blowing wall on the turbulent friction coefficient by using blowing wall data to determine the blowing wall friction coefficient. The erosive burning behavior of full-scale motors is now predicted more closely than with other recent models.

5 CFR 9701.336 - Treatment of employees whose pay does not fall below the minimum adjusted rate of their band.

Code of Federal Regulations, 2012 CFR

2012-01-01

... fall below the minimum adjusted rate of their band. 9701.336 Section 9701.336 Administrative Personnel... Administration Locality and Special Rate Supplements § 9701.336 Treatment of employees whose pay does not fall... or special rate supplement) does not fall below the minimum adjusted rate of his or her band as a...

5 CFR 9701.336 - Treatment of employees whose pay does not fall below the minimum adjusted rate of their band.

Code of Federal Regulations, 2013 CFR

2013-01-01

... fall below the minimum adjusted rate of their band. 9701.336 Section 9701.336 Administrative Personnel... Administration Locality and Special Rate Supplements § 9701.336 Treatment of employees whose pay does not fall... or special rate supplement) does not fall below the minimum adjusted rate of his or her band as a...

5 CFR 9701.336 - Treatment of employees whose pay does not fall below the minimum adjusted rate of their band.

Code of Federal Regulations, 2014 CFR

2014-01-01

... fall below the minimum adjusted rate of their band. 9701.336 Section 9701.336 Administrative Personnel... Administration Locality and Special Rate Supplements § 9701.336 Treatment of employees whose pay does not fall... or special rate supplement) does not fall below the minimum adjusted rate of his or her band as a...

5 CFR 9701.336 - Treatment of employees whose pay does not fall below the minimum adjusted rate of their band.

Code of Federal Regulations, 2011 CFR

2011-01-01

... fall below the minimum adjusted rate of their band. 9701.336 Section 9701.336 Administrative Personnel... Administration Locality and Special Rate Supplements § 9701.336 Treatment of employees whose pay does not fall... or special rate supplement) does not fall below the minimum adjusted rate of his or her band as a...

The minimum or natural rate of flow and droplet size ejected by Taylor cone-jets: physical symmetries and scaling laws

NASA Astrophysics Data System (ADS)

Gañán-Calvo, A. M.; Rebollo-Muñoz, N.; Montanero, J. M.

2013-03-01

We aim to establish the scaling laws for both the minimum rate of flow attainable in the steady cone-jet mode of electrospray, and the size of the resulting droplets in that limit. Use is made of a small body of literature on Taylor cone-jets reporting precise measurements of the transported electric current and droplet size as a function of the liquid properties and flow rate. The projection of the data onto an appropriate non-dimensional parameter space maps a region bounded by the minimum rate of flow attainable in the steady state. To explain these experimental results, we propose a theoretical model based on the generalized concept of physical symmetry, stemming from the system time invariance (steadiness). A group of symmetries rising at the cone-to-jet geometrical transition determines the scaling for the minimum flow rate and related variables. If the flow rate is decreased below that minimum value, those symmetries break down, which leads to dripping. We find that the system exhibits two instability mechanisms depending on the nature of the forces arising against the flow: one dominated by viscosity and the other by the liquid polarity. In the former case, full charge relaxation is guaranteed down to the minimum flow rate, while in the latter the instability condition becomes equivalent to the symmetry breakdown by charge relaxation or separation. When cone-jets are formed without artificially imposing a flow rate, a microjet is issued quasi-steadily. The flow rate naturally ejected this way coincides with the minimum flow rate studied here. This natural flow rate determines the minimum droplet size that can be steadily produced by any electrohydrodynamic means for a given set of liquid properties.

Low-impact chemical weed control techniques in UNESCO World Heritage Sites of Cuba.

PubMed

Hernandez-Enriquez, O; Alvarez, R; Morelli, F; Bastida, F; Camacho, D; Menendez, J

2012-01-01

Dichrostachys cinerea is a thorny, acacia-like, fast-growing woody bush which invades fields, wasteland, road sides and other disturbed areas. This gregarious species has become a very aggressive invasive weed in Cuba, where no native predators or pathogens are found. It often encroaches in fallows, overgrazed areas and mismanaged veld. D. cinerea is a very difficult weed to eliminate because of its active suckering, and is liable to produce dense thickets which are quite impenetrable on account of the density and abundance of its long, stiff, sharp thorns. In the Valle de los Ingenios area (Cuba Central), the tree is unchecked and forms veritable forests in areas on which cane growing has been discontinued. Physical management by cutting and burning the plants is not a very efficient control method, since the seeds survive in the soil, and they grow very fast. Therefore, chemical methods via the use of herbicides are often necessary to eradicate this weed. A preliminary study using glyphosate and auxin-like herbicides (2,4-D + picloram, MCPA, and MCPA + 2,4-D) plus adjuvants has been carried out in order to elucidate the best mixtures rendering maximum weed control with minimum herbicide rate and environmental stress. None of the herbicides used except glyphosate and 2,4-D + picloram showed acceptable mortality rates (75-80%) at the recommended doses tested. In the failed herbicide treatments, only the use of double herbicide rates succeeded in controlling marabou. The herbicide mixture of 2,4-D + picloram formulated with either a non-ionic surfactant or a mixture of fatty acid esters was the best option to control D. cinerea in terms of maximum effectiveness and minimum environmental stress, as the reduction in active ingredients applied to the environment was x3 in these two adjuvant-amended formulations compared to 2,4-D + picloram alone.

Combustion Limits and Efficiency of Turbojet Engines

NASA Technical Reports Server (NTRS)

Barnett, H. C.; Jonash, E. R.

1956-01-01

Combustion must be maintained in the turbojet-engine combustor over a wide range of operating conditions resulting from variations in required engine thrust, flight altitude, and flight speed. Furthermore, combustion must be efficient in order to provide the maximum aircraft range. Thus, two major performance criteria of the turbojet-engine combustor are (1) operatable range, or combustion limits, and (2) combustion efficiency. Several fundamental requirements for efficient, high-speed combustion are evident from the discussions presented in chapters III to V. The fuel-air ratio and pressure in the burning zone must lie within specific limits of flammability (fig. 111-16(b)) in order to have the mixture ignite and burn satisfactorily. Increases in mixture temperature will favor the flammability characteristics (ch. III). A second requirement in maintaining a stable flame -is that low local flow velocities exist in the combustion zone (ch. VI). Finally, even with these requirements satisfied, a flame needs a certain minimum space in which to release a desired amount of heat, the necessary space increasing with a decrease in pressure (ref. 1). It is apparent, then, that combustor design and operation must provide for (1) proper control of vapor fuel-air ratios in the combustion zone at or near stoichiometric, (2) mixture pressures above the minimum flammability pressures, (3) low flow velocities in the combustion zone, and (4) adequate space for the flame.

20 CFR 229.42 - When a child can no longer be included in computing an annuity rate under the overall minimum.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false When a child can no longer be included in... Entitlement Under the Overall Minimum Ends § 229.42 When a child can no longer be included in computing an annuity rate under the overall minimum. A child's inclusion in the computation of the overall minimum rate...

20 CFR 229.42 - When a child can no longer be included in computing an annuity rate under the overall minimum.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false When a child can no longer be included in... Entitlement Under the Overall Minimum Ends § 229.42 When a child can no longer be included in computing an annuity rate under the overall minimum. A child's inclusion in the computation of the overall minimum rate...

20 CFR 229.42 - When a child can no longer be included in computing an annuity rate under the overall minimum.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true When a child can no longer be included in... Entitlement Under the Overall Minimum Ends § 229.42 When a child can no longer be included in computing an annuity rate under the overall minimum. A child's inclusion in the computation of the overall minimum rate...

20 CFR 229.42 - When a child can no longer be included in computing an annuity rate under the overall minimum.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true When a child can no longer be included in... Entitlement Under the Overall Minimum Ends § 229.42 When a child can no longer be included in computing an annuity rate under the overall minimum. A child's inclusion in the computation of the overall minimum rate...

Tailorable Burning Behavior of Ti14 Alloy by Controlling Semi-Solid Forging Temperature.

PubMed

Chen, Yongnan; Yang, Wenqing; Zhan, Haifei; Zhang, Fengying; Huo, Yazhou; Zhao, Yongqing; Song, Xuding; Gu, Yuantong

2016-08-16

Semi-solid processing (SSP) is a popular near-net-shape forming technology for metals, while its application is still limited in titanium alloy mainly due to its low formability. Recent works showed that SSP could effectively enhance the formability and mechanical properties of titanium alloys. The processing parameters such as temperature and forging rate/ratio, are directly correlated with the microstructure, which endow the alloy with different chemical and physical properties. Specifically, as a key structural material for the advanced aero-engine, the burn resistant performance is a crucial requirement for the burn resistant titanium alloy. Thus, this work aims to assess the burning behavior of Ti14, a kind of burn resistant alloy, as forged at different semi-solid forging temperatures. The burning characteristics of the alloy are analyzed by a series of burning tests with different burning durations, velocities, and microstructures of burned sample. The results showed that the burning process is highly dependent on the forging temperature, due to the fact that higher temperatures would result in more Ti₂Cu precipitate within grain and along grain boundaries. Such a microstructure hinders the transport of oxygen in the stable burning stage through the formation of a kind of oxygen isolation Cu-enriched layer under the burn product zone. This work suggests that the burning resistance of the alloy can be effectively tuned by controlling the temperature during the semi-solid forging process.

Paediatric burn unit in Portugal: Beds needed using a bed-day approach.

PubMed

Santos, João V; Viana, João; Amarante, José; Freitas, Alberto

2017-03-01

Despite the high burden of children with burns, there is not a paediatric burn unit (PBU) in Portugal. We aimed to estimate the Portuguese health care providing needs on paediatric burns. We performed a nation-wide retrospective study, between 2009 and 2013, among less than 16 years-old inpatients with burns that met the transfer criteria to a burn unit in Portugal. A bed-day approach was used, targeting an occupancy rate of 70-75%, and possible locations were studied. The primary outcome was the number of beds needed, and secondary outcomes were the overload and revenue for each possible number of beds in a PBU. A total of 1155 children met the transfer criteria to a burn unit, representing a total of 17,371 bed-days. Occupancy rates of 11-bed, 12-bed, 13-bed and 14-bed PBU were, respectively, 79.7%, 75.3%, 71.0% and 66.8%. The 13-bed PBU scenario would represent an overload of 523 bed-days, revenue of more than 5 million Euros and a ratio of 1 PBU bed per 123,409 children. Using a groundbreaking approach, the optimal number of PBU beds needed in Portugal is 13. However, as half of the patients who met burn transfer criteria are not transferred, this bed number might be overestimated if this pattern maintains, despite the underestimation with our method approach. If a PBU is to be created the preferable location is Porto. Cost-effectiveness studies should be performed. Copyright © 2016 Elsevier Ltd and ISBI. All rights reserved.

Effect of prescribed fire on soil properties and N transformation in two vegetation types in South China.

PubMed

Wang, Faming; Li, Jian; Zou, Bi; Xu, Xin; Li, Zhian

2013-06-01

Prescribed fire is a common site preparation practice in forest management in southern China. However, the effect of fire on soil properties and N transformations is still poorly understood in this region. In this study, soil properties and N transformations in burned and unburned site of two vegetation types (Eucalyptus plantation and shrubland) were compared in rainy and dry seasons after 2 years' prescribed fire. Soil pH and soil NH4-N were all higher in the burned site compared to the unburned control. Furthermore, burned sites had 30-40 % lower of soil total phosphorus than conspecific unburned sites. There was no difference in soil organic matter, total N, soil exchangeable cations, available P or NO3-N. Nitrogen mineralization rate of 0-5 cm soil in the unburned site ranged from 8.24 to 11.6 mg N kg(-1) soil month(-1) in the rainy season, compared to a lower level of 4.82-5.25 mg N kg(-1) soil month(-1) in the burned sites. In contrast, 0-5 cm layer nitrification rate was overall 2.47 mg N kg(-1) soil month(-1) in the rainy season, and was not significantly affected by burning. The reduced understory vegetation coverage after burning may be responsible for the higher soil NH4-N in the burned site. This study highlights that a better understanding the effect of prescribed burning on soil nutrients cycling would provide a critical foundation for management decision and be beneficial to afforestation in southern China.

A comparison of the effect of early insertion of standard latex and silver-impregnated latex foley catheters on urinary tract infections in burn patients.

PubMed

Newton, Terry; Still, Joseph M; Law, Edward

2002-04-01

A retrospective study was designed to compare the incidence of urinary tract infections during two different time periods in burn patients treated with two different types of Foley catheters. In time period 1, latex catheters present on admission were not changed. In time period 2, catheters were replaced on admission with silver alloy-impregnated catheters. In time period 1, the rate of symptomatic urinary tract infections was 7.2 per 1,000 catheter-days. In time period 2, the rate was 4.4 per 1,000 catheter-days. Results, compared using Fisher's exact test, revealed a statistically significant P value of .029. The use of silver-impregnated catheters significantly lowered the rate of urinary tract infection at our burn center.

Biomass Burning Emissions from Fire Remote Sensing

NASA Technical Reports Server (NTRS)

Ichoku, Charles

2010-01-01

Knowledge of the emission source strengths of different (particulate and gaseous) atmospheric constituents is one of the principal ingredients upon which the modeling and forecasting of their distribution and impacts depend. Biomass burning emissions are complex and difficult to quantify. However, satellite remote sensing is providing us tremendous opportunities to measure the fire radiative energy (FRE) release rate or power (FRP), which has a direct relationship with the rates of biomass consumption and emissions of major smoke constituents. In this presentation, we will show how the satellite measurement of FRP is facilitating the quantitative characterization of biomass burning and smoke emission rates, and the implications of this unique capability for improving our understanding of smoke impacts on air quality, weather, and climate. We will also discuss some of the challenges and uncertainties associated with satellite measurement of FRP and how they are being addressed.

Hollow steel tips for reducing distal fiber burn-back during thulium fiber laser lithotripsy.

PubMed

Hutchens, Thomas C; Blackmon, Richard L; Irby, Pierce B; Fried, Nathaniel M

2013-07-01

The use of thulium fiber laser (TFL) as a potential alternative laser lithotripter to the clinical holmium:YAG laser is being studied. The TFL's Gaussian spatial beam profile provides efficient coupling of higher laser power into smaller core fibers without proximal fiber tip degradation. Smaller fiber diameters are more desirable, because they free up space in the single working channel of the ureteroscope for increased saline irrigation rates and allow maximum ureteroscope deflection. However, distal fiber tip degradation and "burn-back" increase as fiber diameter decreases due to both excessive temperatures and mechanical stress experienced during stone ablation. To eliminate fiber tip burn-back, the distal tip of a 150-μm core silica fiber was glued inside 1-cm-long steel tubing with fiber tip recessed 100, 250, 500, 1000, or 2000 μm inside the steel tubing to create the hollow-tip fiber. TFL pulse energy of 34 mJ with 500-μs pulse duration and 150-Hz pulse rate was delivered through the hollow-tip fibers in contact with human calcium oxalate monohydrate urinary stones during ex vivo studies. Significant fiber tip burn-back and degradation was observed for bare 150-μm core-diameter fibers. However, hollow steel tip fibers experienced minimal fiber burn-back without compromising stone ablation rates. A simple, robust, compact, and inexpensive hollow fiber tip design was characterized for minimizing distal fiber burn-back during the TFL lithotripsy. Although an increase in stone retropulsion was observed, potential integration of the hollow fiber tip into a stone basket may provide rapid stone vaporization, while minimizing retropulsion.

A Pilot Study of the Efficacy of Active Leptospermum Honey for the Treatment of Partial-Thickness Facial Burns.

PubMed

Duncan, Christina L; Enlow, Paul T; Szabo, Margo M; Tolchin, Eric; Kelly, Robert W; Castanon, Lourdes; Aballay, Ariel M

2016-08-01

Research suggests that active Leptospermum honey (ALH) improves outcomes in patients with partial-thickness burns by enhancing healing and reepithelialization rates, as well as by protecting against antibiotic-resistant microorganisms. This study assessed the effectiveness of ALH gel on healing time, bacterial growth, patient satisfaction, and cost of treatment. Single-arm, prospective case series. Seven patients (aged 7-64 years) with partial-thickness facial burns were recruited from a northeastern US burn center. All patients cleansed their wounds daily with soap and water, after which they applied ALH gel. Three physicians independently rated healing using wound photography and daily tests for the presence of exudate. Wound cultures on days 1 and 7 (±2 days) assessed bacterial growth. Patients completed a satisfaction survey at the end of treatment, and cost of treatment was calculated. Healing time ranged from 3 to 14 days (mean, 8.1 days). Wound cultures revealed normal bacterial growth on days 1 and 7 for all patients. Patients rated ALH gel favorably, with the most common complaint of stickiness in 5 patients. One patient experienced transient burning on application that did not interrupt treatment. Average hospital-based cost of treatment was $26.15 per patient. Healing time was congruent with or better than what would have been expected with standard treatment. Furthermore, despite no antibiotic treatment, wound culture results yielded no abnormal bacterial growth. Finally, patients overall reported satisfaction with treatment. The findings of this study suggest that ALH is a clinically and economically valuable treatment for partial-thickness facial burns.

Factors affecting the depth of burns occurring in medical institutions.

PubMed

Cho, Young Soon; Choi, Young Hwan; Yoon, Cheonjae; You, Je Sung

2015-05-01

Most cases of burns occurring in medical institutions are associated with activities involving heat. It is very difficult to detect these burns. To date, there are few reports on burns occurring in medical institutions. The purpose of this paper was to analyze the etiology of burns occurring in medical institutions and to elucidate the factors affecting burn depth. We conducted a retrospective analysis of the medical records of patients who visited our center from April 2008 to February 2013. This study enrolled all patients with burns occurring in the medical institution during or related to treatment. We excluded burn patients whose burns were not related to treatment (for example, we excluded patients with scalding burns that occurred in the hospital cafeteria and pediatric patients with hot water burns from the water purifier). However, patients with burns that occurred in the recovery room after general anesthesia were included. A total of 115 patients were enrolled in this study. The average patient age was 41.5 years, with more women than men (M:F=31:84). There were 29 cases (25.3%) of superficial burns (first-degree and superficial second-degree) and 86 cases (74.7%) of deep burns (deep second-degree and third-degree). Hot packs were the most common cause of burns (27 cases, 23.5%), followed by laser therapy, heating pads, and grounding pads, accounting for 15 cases each. There were 89 cases (77.4%) of contact burns and 26 cases (22.6%) of non-contact burns. The most common site of burns was the lower extremities (41 cases, 35.7%). The burn site and contact burns were both factors affecting burn depth. The rate of deep burns was higher in patients with contact burns than in those with non-contact burns (odds ratio 4.26) and was associated with lower body burns (odds ratio 2.85). In burns occurring in medical institutions, there is a high probability of a deep burn if it is a contact burn or occurs in the lower body. Therefore, safety guidelines are needed for the use of hot packs, heating pads, and grounding pads to prevent such incidents. Copyright © 2014 Elsevier Ltd and ISBI. All rights reserved.

Combustion of textile residues in a packed bed

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ryu, Changkook; Phan, Anh N.; Sharifi, Vida N.

2007-08-15

Textile is one of the main components in the municipal waste which is to be diverted from landfill for material and energy recovery. As an initial investigation for energy recovery from textile residues, the combustion of cotton fabrics with a minor fraction of polyester was investigated in a packed bed combustor for air flow rates ranging from 117 to 1638 kg/m{sup 2} h (0.027-0.371 m/s). Tests were also carried out in order to evaluate the co-combustion of textile residues with two segregated waste materials: waste wood and cardboard. Textile residues showed different combustion characteristics when compared to typical waste materialsmore » at low air flow rates below 819 kg/m{sup 2} h (0.186 m/s). The ignition front propagated fast along the air channels randomly formed between packed textile particles while leaving a large amount of unignited material above. This resulted in irregular behaviour of the temperature profile, ignition rate and the percentage of weight loss in the ignition propagation stage. A slow smouldering burn-out stage followed the ignition propagation stage. At air flow rates of 1200-1600 kg/m{sup 2} h (0.272-0.363 m/s), the bed had a maximum burning rate of about 240 kg/m{sup 2} h consuming most of the combustibles in the ignition propagation stage. More uniform combustion with an increased burning rate was achieved when textile residues were co-burned with cardboard that had a similar bulk density. (author)« less

Fire behavior, weather, and burn severity of the 2007 Anaktuvuk River tundra fire, North Slope, Alaska

Treesearch

Benjamin M. Jones; Crystal A. Kolden; Randi Jandt; John T. Abatzoglu; Frank Urban; Christopher D. Arp

2009-01-01

In 2007, the Anaktuvuk River Fire (ARF) became the largest recorded tundra fire on the North Slope of Alaska. The ARF burned for nearly three months, consuming more than 100,000 ha. At its peak in early September, the ARF burned at a rate of 7000 ha d-1. The conditions potentially responsible for this large tundra fire include modeled record high...

Falls, cuts and burns in children 0-4 years of age: 2004 Pelotas (Brazil) birth cohort.

PubMed

Barcelos, Raquel Siqueira; Santos, Iná S; Matijasevich, Alicia; Barros, Aluísio J D; Barros, Fernando C; França, Giovanny Vinicius Araújo; Silva, Vera Lúcia Schmidt da

2017-03-09

Knowledge on the incidence of childhood accidents according to the child's stage of development is important for designing preventive programs targeting each age bracket. The aim of this study was to describe the incidence of falls, cuts, and burns in children up to four years of age according to family economic status and maternal age and schooling, in children from the 2004 Pelotas (Brazil) birth cohort. We calculated the incidence rates and incidence rates ratios for the 0-12, 12-24, and 24-48- months of age. Falls were the most frequently reported accidents in all the age brackets, followed by cuts and burns. Boys suffered more falls and cuts than girls in the first two years of life. In the second year of life, the incidence of falls and burns practically tripled, while cuts nearly doubled when compared to the first year, in both sexes. Burns were equally frequent in girls and boys in all three age brackets. The incidence of falls and cuts was higher in boys. In both sexes, having an adolescent mother was associated with falls and cuts in all three age brackets; low maternal schooling was associated with burns and cuts at 48 months; and low family socioeconomic status was associated with falls and cuts at 48 months.

The treatment of sulphur mustard burns with laser debridement.

PubMed

Evison, D; Brown, R F R; Rice, P

2006-01-01

The chemical warfare agent, sulphur mustard (SM), is a potent blistering agent in man. Skin exposure can produce partial-thickness burns which take up to three months to heal. The aim of this study was to investigate the use of early laser ablation as a means of accelerating this exceptionally slow rate of healing. Four circular partial-thickness SM burns were induced on the dorsum of nine large white pigs (under general anaesthesia). At 72 h post-exposure, three burns per animal were ablated with a single pass of an UltraPulse 5000C CO(2) laser, at a fluence of 5-6 J cm(-2). All the burns were dressed with silver sulphadiazine and a semi-occlusive dressing. At one, two and three weeks post-surgery three animals were culled and all lesions excised for histological analysis. Burn depth was confirmed and measurements of the radii of regenerative epithelium were performed allowing the area of the zone of re-epithelialisation in each lesion to be calculated. Laser-treated lesions showed a significant increase (350%) in healing rates compared to controls (p<0.005). At two weeks, the laser-treated sites were 95% healed in comparison with control sites (28% healed). These data suggest that laser ablation may be effective in the treatment of partial-thickness SM-induced skin injury.

[An epidemiological investigation of pediatric patients under 14 with large area burns: a multicenter study].

PubMed

Cheng, W F; Zhao, D X; Shen, Z A; Zhang, H Y; Tu, J J; Yuan, Z Q; Duan, P; Song, G D

2017-02-14

Objective: To investigate and evaluate the epidemiological characteristics of patients under 14 with large area burns in China. Methods: Data of pediatric patients aged 0-14yr with ≥30% total body surface area (TBSA) burned admitted into 106 burn centers in the mainland of China in 2014 were retrieved. The children were divided into three age groups: 0-3, 4-6 and 7-14 years according to the age. Information of age, gender, time of burn injury, causes of burns, admission time, prehospital emergency care of burn wound, burn area, inhalation injuries, the case fatality rate and length of hospital stay were collected for analysis. Results: Of the 486 cases included, 285 (58.6%) were boys and 201 (41.4%) were girls. The mean age of the children was (3.4±2.8) years. Children under 3 years old accounted for 67.5% of all the cases. 271 of the burn injuries (55.8%) occurred from April through August. Scalds and flames were the main causes of burns, which were the causes of 394 cases (81.1%) and 71 cases (14.6%), respectively. The burn injuries resulted from scalds and flames accounted for 89.6% and 7.3%, 70.8% and 21.9%, 51.6% and 41.9% in the age group of 0-3, 4-6 and 7-14 years respectively. The distribution of burn etiology in different age groups differed significantly (χ(2)=21.239, 59.442, 7.333, all P <0.01). Most of the patients (57.8%) were admitted within 2 hours after injury. However, when it came to the pre-hospital emergency management of burn wound, 164 patients (33.7%) did not use any drug or wound dressing, whereas the wound area of 236 patients (48.6%) were treated improperly with toothpaste, soy sauce, eggs or other non-standard disposal. The mean TBSA area of the patients was (42.1±14.5)%, while 288 (59.3%) of the patients suffered full thickness burns with mean TBSA of (24.5±17.9)%. The case fatality rate (CFR) was 4.1%, and the CFR of patients complicated with inhalation injury was significantly higher than those without ( P <0.01). The average length of stay for pediatric burn patients was (52.3±40.2) days. Conclusions: Children under 3 years old are important target population of severe burns. Scald is the most common type of burns, while the proportion of flames increases as age goes up. Most patients are likely to get clinical treatment in time, however, the pre-hospital emergency burn care is not satisfying at present.

Automated Escape Guidance Algorithms for An Escape Vehicle

NASA Technical Reports Server (NTRS)

Flanary, Ronald; Hammen, David; Ito, Daigoro; Rabalais, Bruce; Rishikof, Brian; Siebold, Karl

2002-01-01

An escape vehicle was designed to provide an emergency evacuation for crew members living on a space station. For maximum escape capability, the escape vehicle needs to have the ability to safely evacuate a station in a contingency scenario such as an uncontrolled (e.g., tumbling) station. This emergency escape sequence will typically be divided into three events: The fust separation event (SEP1), the navigation reconstruction event, and the second separation event (SEP2). SEP1 is responsible for taking the spacecraft from its docking port to a distance greater than the maximum radius of the rotating station. The navigation reconstruction event takes place prior to the SEP2 event and establishes the orbital state to within the tolerance limits necessary for SEP2. The SEP2 event calculates and performs an avoidance burn to prevent station recontact during the next several orbits. This paper presents the tools and results for the whole separation sequence with an emphasis on the two separation events. The fust challenge includes collision avoidance during the escape sequence while the station is in an uncontrolled rotational state, with rotation rates of up to 2 degrees per second. The task of avoiding a collision may require the use of the Vehicle's de-orbit propulsion system for maximum thrust and minimum dwell time within the vicinity of the station vicinity. The thrust of the propulsion system is in a single direction, and can be controlled only by the attitude of the spacecraft. Escape algorithms based on a look-up table or analytical guidance can be implemented since the rotation rate and the angular momentum vector can be sensed onboard and a-priori knowledge of the position and relative orientation are available. In addition, crew intervention has been provided for in the event of unforeseen obstacles in the escape path. The purpose of the SEP2 burn is to avoid re-contact with the station over an extended period of time. Performing this maneuver properly requires knowledge of the orbital state, which is obtained during the navigation state reconstruction event. Since the direction of the delta-v of the SEPI maneuver is a random variable with respect to the Local Vertical Local Horizontal (LVLH) coordinate system, calculating the required SEP2 burn is a challenge. This problem was solved using a neural network as a model-free function approximation technique.

Wildfire risk assessment in a typical Mediterranean wildland-urban interface of Greece.

PubMed

Mitsopoulos, Ioannis; Mallinis, Giorgos; Arianoutsou, Margarita

2015-04-01

The purpose of this study was to assess spatial wildfire risk in a typical Mediterranean wildland-urban interface (WUI) in Greece and the potential effect of three different burning condition scenarios on the following four major wildfire risk components: burn probability, conditional flame length, fire size, and source-sink ratio. We applied the Minimum Travel Time fire simulation algorithm using the FlamMap and ArcFuels tools to characterize the potential response of the wildfire risk to a range of different burning scenarios. We created site-specific fuel models of the study area by measuring the field fuel parameters in representative natural fuel complexes, and we determined the spatial extent of the different fuel types and residential structures in the study area using photointerpretation procedures of large scale natural color orthophotographs. The results included simulated spatially explicit fire risk components along with wildfire risk exposure analysis and the expected net value change. Statistical significance differences in simulation outputs between the scenarios were obtained using Tukey's significance test. The results of this study provide valuable information for decision support systems for short-term predictions of wildfire risk potential and inform wildland fire management of typical WUI areas in Greece.

Wildfire Risk Assessment in a Typical Mediterranean Wildland-Urban Interface of Greece

NASA Astrophysics Data System (ADS)

Mitsopoulos, Ioannis; Mallinis, Giorgos; Arianoutsou, Margarita

2015-04-01

The purpose of this study was to assess spatial wildfire risk in a typical Mediterranean wildland-urban interface (WUI) in Greece and the potential effect of three different burning condition scenarios on the following four major wildfire risk components: burn probability, conditional flame length, fire size, and source-sink ratio. We applied the Minimum Travel Time fire simulation algorithm using the FlamMap and ArcFuels tools to characterize the potential response of the wildfire risk to a range of different burning scenarios. We created site-specific fuel models of the study area by measuring the field fuel parameters in representative natural fuel complexes, and we determined the spatial extent of the different fuel types and residential structures in the study area using photointerpretation procedures of large scale natural color orthophotographs. The results included simulated spatially explicit fire risk components along with wildfire risk exposure analysis and the expected net value change. Statistical significance differences in simulation outputs between the scenarios were obtained using Tukey's significance test. The results of this study provide valuable information for decision support systems for short-term predictions of wildfire risk potential and inform wildland fire management of typical WUI areas in Greece.

A Semi-analytic Criterion for the Spontaneous Initiation of Carbon Detonations in White Dwarfs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Garg, Uma; Chang, Philip, E-mail: umagarg@uwm.edu, E-mail: chang65@uwm.edu

Despite over 40 years of active research, the nature of the white dwarf progenitors of SNe Ia remains unclear. However, in the last decade, various progenitor scenarios have highlighted the need for detonations to be the primary mechanism by which these white dwarfs are consumed, but it is unclear how these detonations are triggered. In this paper we study how detonations are spontaneously initiated due to temperature inhomogeneities, e.g., hotspots, in burning nuclear fuel in a simplified physical scenario. Following the earlier work by Zel’Dovich, we describe the physics of detonation initiation in terms of the comparison between the spontaneousmore » wave speed and the Chapman–Jouguet speed. We develop an analytic expression for the spontaneous wave speed and utilize it to determine a semi-analytic criterion for the minimum size of a hotspot with a linear temperature gradient between a peak and base temperature for which detonations in burning carbon–oxygen material can occur. Our results suggest that spontaneous detonations may easily form under a diverse range of conditions, likely allowing a number of progenitor scenarios to initiate detonations that burn up the star.« less

A Semi-analytic Criterion for the Spontaneous Initiation of Carbon Detonations in White Dwarfs

NASA Astrophysics Data System (ADS)

Garg, Uma; Chang, Philip

2017-02-01

Despite over 40 years of active research, the nature of the white dwarf progenitors of SNe Ia remains unclear. However, in the last decade, various progenitor scenarios have highlighted the need for detonations to be the primary mechanism by which these white dwarfs are consumed, but it is unclear how these detonations are triggered. In this paper we study how detonations are spontaneously initiated due to temperature inhomogeneities, e.g., hotspots, in burning nuclear fuel in a simplified physical scenario. Following the earlier work by Zel’Dovich, we describe the physics of detonation initiation in terms of the comparison between the spontaneous wave speed and the Chapman-Jouguet speed. We develop an analytic expression for the spontaneous wave speed and utilize it to determine a semi-analytic criterion for the minimum size of a hotspot with a linear temperature gradient between a peak and base temperature for which detonations in burning carbon-oxygen material can occur. Our results suggest that spontaneous detonations may easily form under a diverse range of conditions, likely allowing a number of progenitor scenarios to initiate detonations that burn up the star.

Modelling of Deflagration to Detonation Transition in Porous PETN of Density 1.4 g / cc with HERMES

NASA Astrophysics Data System (ADS)

Reaugh, John; Curtis, John; Maheswaran, Mary-Ann

2017-06-01

The modelling of Deflagration to Detonation Transition in explosives is a severe challenge for reactive burn models because of the complexity of the physics; there is mechanical and thermal interaction of the gaseous burn products with the burning porous matrix, with resulting compaction, shock formation and subsequent detonation. Experiments on the explosive PETN show a strong dependence of run distance to detonation on porosity. The minimum run distance appears to occur when the density is approximately 1.4 g / cc. Recent research on the High Explosive Response to Mechanical Stimulation (HERMES) model for High Explosive Violent Reaction has included the development of a model for PETN at 1.4 g / cc., which allows the prediction of the run distance in the experiments for PETN at this density. Detonation and retonation waves as seen in the experiment are evident. The HERMES simulations are analysed to help illuminate the physics occurring in the experiments. JER's work was performed under the auspices of the US DOE by LLNL under Contract DE-AC52-07NA27344 and partially funded by the Joint US DoD/DOE Munitions Technology Development Program. LLNL-ABS-723537.

Asymptotic Methods Especially in Combustion.

DTIC Science & Technology

1981-11-01

1980.) Invited paper. 101. G.S.S. Ludford & Asok K. Sen: Burning rate maximum of a plane premixed flame. Proceedings of the Seventh International...Reactive Systems, ed. by J. Ray Bowen, N. Manson, Antoni K. Ompenheim, and R.I. Soloukhin.) 102. G.S.S. Ludford: Premixed cylindrical flames...106. Asok K. Sen & 0.S.S. Ludford: Effects of mass diffusion on the burning rate of non-4ilute mixtures. Proceedings of the Eighteenth Symposium

Fire scar growth and closure rates in white oak (Quercus alba) and the implications for prescribed burning

Treesearch

Michael C. Stambaugh; Kevin T. Smith; Daniel C. Dey

2017-01-01

In burned forestlands, fire scar wounds commonly occur on tree stems as a result of cambial heating. In hardwood forests in particular, wounding can lead to stem decay with the extent of decay being related to scar size and exposure time. Therefore, wound closure rates are important to understand in the context of fire management such that allowing sufficient time for...

The effects of Q-nuclei on stellar burning

NASA Astrophysics Data System (ADS)

Boyd, R. N.; Turner, R. E.; Sur, B.; Rybarcyk, L.; Joseph, C.

1985-01-01

The effects of anomalous nuclei, Q-nuclei, on stellar burning are examined. The baryon binding energies, beta-decay properties, and thermonuclear reaction rates for the Q-nuclei suggest they could catalyze a cycle in which four protons are combined to form a 4He nucleus. The properties required of the Q-nuclei for them to solve the solar neutrino problem are determined. A solar modelling calculation was performed with Q-nuclei included, and several interesting results therefrom are compared to observations. Finally the solar neutrino detection rates for 71Ga and 115In detectors, in addition to that for 37Cl, are estimated when Q-nuclei are included in the solar burning.

Determining the Limiting Factors Controlling Soil Ecosystem Regeneration After a Stand-replacing Wildfire

NASA Astrophysics Data System (ADS)

Cooperdock, S.; Breecker, D.

2016-12-01

Like all forest disturbances, wildfires remove vegetation but additionally they can remove or transform soil nutrients through volatilization due to extreme temperatures. As the stability and nutrient source for plants, soils are the key to forest regeneration after disturbances and in order to predict and mitigate damage, it is essential to understand how soils are affected by fires. In this study, soil respiration and temperature were measured in-situ at 20 sites affected by two fires that occurred during September 2011 and October 2015 in Bastrop County TX. At each site, soil samples were collected from 0-5 cm depth. These samples were incubated in the dark at 25° C and 22% water content to determine respiration rates under controlled environmental conditions. Total C, N, trace element concentrations and pH were measured in each soil sample to determine the effect of fire on soil chemistry and the effect of soil chemistry on soil activity. These methods of respiration measurement were performed to distinguish the impact of environmental and chemical factors on soil biological activity. Results show that from May to July 2016, soil temperatures increased an average of 6° C and 1° C more in burned areas than in unburned areas at depths of 5 cm and 15 cm, respectively. This likely results from fire-induced decrease in overstory cover, decrease in organic matter insulation and darkening soil color. Increasing temperatures correspond with a decrease in water content and respiration. Pearson's tests of the effect of soil moisture loss on a decrease of in-situ respiration rate show a correlation for burned soils, especially at sites burned in both fires (rho=0.90, p=0.04) and no correlation for unburned soils, suggesting a larger impact of environmental factors on soil activity in burned soils. Microcosm experiments show N concentration significantly affects respiration rate in unburned plots (rho=0.89, p=0.04) and both N (rho=0.92, p=0.03) and C concentration (rho=0.92, p=0.03) affect respiration rate in plots burned in 2011. No correlation was detected between nutrient concentration and respiration rate in recently burned plots, suggesting a larger influence of nutrient limitation on regeneration as time since burn increases. These results reveal that the limiting factors governing soil activity shift after wildfires.

Massage has no observable effect on distress in children with burns: A randomized, observer-blinded trial.

PubMed

van Dijk, Monique; O'Flaherty, Linda Anne; Hoedemaker, Tessa; van Rosmalen, Joost; Rode, Heinz

2018-02-01

In a previous observational study we found that massage therapy reduced anxiety and stress in pediatric burn patients. We aimed to test this effect in a randomized controlled trial. To determine whether (1) aromatherapy massage can provide relaxation to hospitalized children with burns; (2) massage with aromatherapy oil is more effective than without; and (3) massage sessions are more effective when repeated. Randomized controlled clinical trial with 3 arms conducted in a burns unit from April 2013 to December 2014 in Cape Town, South Africa. Massage with carrier oil, massage with aromatherapy oil, and standard nursing care only. Scores on the Muscle Tension Inventory (MTI) and Behavioral Relaxation Scale (BRS) to assess level of relaxation. Scores on the COMFORT behaviour scale and Numeric Rating Scale Distress to assess level of distress. Secondary outcomes were heart rate and oxygen saturation levels. Linear mixed models were used to determine the effect of condition and session number (1 to a maximum of 5 sessions per child) correcting for baseline outcomes of COMFORT behaviour scores and heart rates after sessions. Secondary analyses included the addition of sex, age, and total body surface area (TBSA) burned as covariates. We included 284 children aged 5 weeks to 13 years with TBSA burned between 10 and 45%. Two-thirds (65.5%) were under the age of 3 years. Mixed model analyses revealed no significant difference in reduction of COMFORT behavior scores (p=0.18), or heart rates (p=0.18) between the three study arms. These outcomes were also not associated with the session number (p=0.92 and p=0.13, respectively). Level of relaxation could not be reliably assessed with the MTI and BRS because 119 patients (41.9%) had bandages covering the larger part of the face, and in 40.1% of cases the child was not in the required position. Massage therapy with or without essential oil was not effective in reducing distress behavior or heart rate in hospitalized children with burns. Evaluating the effectiveness of massage in terms of relaxation proved difficult in young children. The Netherlands National Trial Registry: NRT3929. Copyright © 2017 Elsevier Ltd and ISBI. All rights reserved.

Solid rocket motor fire tests: Phases 1 and 2

NASA Astrophysics Data System (ADS)

Chang, Yale; Hunter, Lawrence W.; Han, David K.; Thomas, Michael E.; Cain, Russell P.; Lennon, Andrew M.

2002-01-01

JHU/APL conducted a series of open-air burns of small blocks (3 to 10 kg) of solid rocket motor (SRM) propellant at the Thiokol Elkton MD facility to elucidate the thermal environment under burning propellant. The propellant was TP-H-3340A for the STAR 48 motor, with a weight ratio of 71/18/11 for the ammonium perchlorate, aluminum, and HTPB binder. Combustion inhibitor applied on the blocks allowed burning on the bottom and/or sides only. Burns were conducted on sand and concrete to simulate near-launch pad surfaces, and on graphite to simulate a low-recession surface. Unique test fixturing allowed propellant self-levitation while constraining lateral motion. Optics instrumentation consisted of a longwave infrared imaging pyrometer, a midwave spectroradiometer, and a UV/visible spectroradiometer. In-situ instrumentation consisted of rod calorimeters, Gardon gauges, elevated thermocouples, flush thermocouples, a two-color pyrometer, and Knudsen cells. Witness materials consisted of yttria, ceria, alumina, tungsten, iridium, and platinum/rhodium. Objectives of the tests were to determine propellant burn characteristics such as burn rate and self-levitation, to determine heat fluxes and temperatures, and to carry out materials analyses. A summary of qualitative results: alumina coated almost all surfaces, the concrete spalled, sand moisture content matters, the propellant self-levitated, the test fixtures worked as designed, and bottom-burning propellant does not self-extinguish. A summary of quantitative results: burn rate averaged 1.15 mm/s, thermocouples peaked at 2070 C, pyrometer readings matched MWIR data at about 2400 C, the volume-averaged plume temperatures were 2300-2400 C with peaks of 2400-2600 C, and the heat fluxes peaked at 125 W/cm2. These results are higher than other researchers' measurements of top-burning propellant in chimneys, and will be used, along with Phase 3 test results, to analyze hardware response to these environments, including General Purpose Heat Sources (GPHS) and Radioisotope Heater Units (RHU). Follow-on Phase 3 tests burning propellant blocks up to 90 kg will be briefly described. .

Epidemiology and financial implications of self-inflicted burns.

PubMed

George, S; Javed, M; Hemington-Gorse, S; Wilson-Jones, N

2016-02-01

The cost of the treatment of burns is high especially in self-inflicted burns with prolonged treatment. We performed a retrospective review of the self-inflicted burns at our regional burns centre to determine the costs incurred in their management and to identify factors which could reduce the financial burden in the future. The data was collected retrospectively of all the inpatient and outpatient self-inflicted burns presenting to our regional burns centre in the year 2011. Twenty one patients (out of a total of 870 patients) presented with self-inflicted burns to our centre in 2011. Five (23.8%) were major burns with an average of 53.2% Total Body Surface Area (TBSA) and 16 (76.2%) were minor burns with an average of 0.5% TBSA. 11 (52.4%) patients had flame burns including 4 self-immolation burns. The mortality rate was 4.8% (n=1). Five (23.8%) patients underwent surgical treatment. Seven (33.3%) patients were treated in intensive care and with average stay of 46.85 days. Critical care and theatre attendances made up most of the costs with average ICU stay per patient calculated at £313,131/day. The total cost of all 21 patients was £1,581,856. Burns are preventable injuries, early detection and intervention in patients with propensity to self-inflict burns can possibly reduce the costs of treatment in the future. Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Impact of facial burns: relationship between depressive symptoms, self-esteem and scar severity.

PubMed

Hoogewerf, Cornelis Johannes; van Baar, Margriet Elisabeth; Middelkoop, Esther; van Loey, Nancy Elisa

2014-01-01

This study assessed the role of self-reported facial scar severity as a possible influencing factor on self-esteem and depressive symptoms in patients with facial burns. A prospective multicentre cohort study with a 6 months follow-up was conducted including 132 patients with facial burns. Patients completed the Patient and Observer Scar Assessment Scale, the Rosenberg Self-esteem Scale and the Hospital Anxiety and Depression Scale. Structural Equation Modeling was used to assess the relations between depressive symptoms, self-esteem and scar severity. The model showed that patient-rated facial scar severity was not predictive for self-esteem and depressive symptoms six months post-burn. There was, however, a significant relationship between early depressive symptoms and both patient-rated facial scar severity and subsequent self-esteem. The variables in the model accounted for 37% of the variance in depressive symptoms six months post-burn and the model provided a moderately well-fitting representation of the data. The study suggests that self-esteem and depressive symptoms were not affected by self-reported facial scar severity but that earlier depressive symptoms were indicative for a more severe self-reported facial scar rating. Therefore, routine psychological screening during hospitalisation is recommended in order to identify patients at risk and to optimise their treatment. Copyright © 2014 Elsevier Inc. All rights reserved.

20 CFR 229.42 - When a child can no longer be included in computing an annuity rate under the overall minimum.

Code of Federal Regulations, 2010 CFR

2010-04-01

... annuity rate under the overall minimum. A child's inclusion in the computation of the overall minimum rate... second month after the month the child's disability ends, if the child is 18 years old or older, and not...

Burns in Israel, comparative study: Demographic, etiologic and clinical trends 1997-2003 vs. 2004-2010.

PubMed

Harats, M; Peleg, K; Givon, A; Kornhaber, R; Goder, M; Jaeger, M; Haik, J

2016-05-01

To review hospitalised burn patients from 2004 to 2010 admitted to Israeli burn units and compare these result with data from 1997 to 2003. Retrospectively, data was collected from the Israeli Trauma Registry (ITR) encompassing all burn admissions to Israeli burn units from 2004-2010 and compared to 1997-2003. Of the 5269 burn patients admitted from 2004 to 2010, 39.8% were non-Jewish. Infants under two years were the prominent age group (24.1%). Second to third degree burns 1-9% TBSA/first degree burns were 71%, second to third degree burns 10-19% TBSA were 16% and those 20%>TBSA consisted of 13%. Only 2.7% involved an inhalation injury. The average length of stay was 11.67 days and mortality rate 3.72%. All data was compared to the previous year's 1997-2003 and trends were identified. Within Israel, high risk populations remain infants under two years of age, males and those from non-Jewish populations. National prevention strategies and campaigns are warranted to inform and educated parents of young children and those at risk of burns. Of note, advances in burn care and procedures might have contributed to a decrease in the length of hospital stay (LOS). Copyright © 2015 Elsevier Ltd and ISBI. All rights reserved.

Method and apparatus to measure the depth of skin burns

DOEpatents

Dickey, Fred M.; Holswade, Scott C.

2002-01-01

A new device for measuring the depth of surface tissue burns based on the rate at which the skin temperature responds to a sudden differential temperature stimulus. This technique can be performed without physical contact with the burned tissue. In one implementation, time-dependent surface temperature data is taken from subsequent frames of a video signal from an infrared-sensitive video camera. When a thermal transient is created, e.g., by turning off a heat lamp directed at the skin surface, the following time-dependent surface temperature data can be used to determine the skin burn depth. Imaging and non-imaging versions of this device can be implemented, thereby enabling laboratory-quality skin burn depth imagers for hospitals as well as hand-held skin burn depth sensors the size of a small pocket flashlight for field use and triage.

On the Mechanism of Boron Ignition

NASA Technical Reports Server (NTRS)

Keil, D. G.; Dreizin, E. L.; Felder, W.; Vicenzi, E. P.

1997-01-01

Boron filaments were electrically heated in air and argon/oxygen mixtures while their resistance, temperature, and radiation at the wavelengths of BO and BO2 bands were monitored. The filaments 'burned' in two distinct stages. Samples of the filaments were quenched at different times before and during the burning and analyzed using electron microscopy. The beginning of the first stage combustion characterized by a local resistance minimum, a sharp spike in boron oxide radiation emission, and a rapid rise in temperature, occurred at 1500 +/- 70 deg. C, independent of pre-heating history and oxygen content (540%) in the gas environment. The data suggest that a phase transition occurs in the filaments at this temperature that triggers stage one combustion. Significant amounts of oxygen were found inside quenched filaments. Large spherical voids formed in the boron filaments during their second stage combustion which is interpreted to indicate a crucial role for the gas dissolution processes in the combustion scenario.

[Effects of hydrogen on the lung damage of mice at early stage of severe burn].

PubMed

Qin, C; Bian, Y X; Feng, T T; Zhang, J H; Yu, Y H

2017-11-20

Objective: To investigate the effects of hydrogen on the lung damage of mice at early stage of severe burn. Methods: One hundred and sixty ICR mice were divided into sham injury, hydrogen, pure burn, and burn+ hydrogen groups according to the random number table, with 40 mice in each group. Mice in pure burn group and burn+ hydrogen group were inflicted with 40% total body surface area full-thickness scald (hereafter referred to as burn) on the back, while mice in sham injury group and hydrogen group were sham injured. Mice in hydrogen group and burn+ hydrogen group inhaled 2% hydrogen for 1 h at post injury hour (PIH) 1 and 6, respectively, while mice in sham injury group and pure burn group inhaled air for 1 h. At PIH 24, lung tissue of six mice in each group was harvested, and then pathological changes of lung tissue were observed by HE staining and the lung tissue injury pathological score was calculated. Inferior vena cava blood and lung tissue of other eight mice in each group were obtained, and then content of high mobility group box 1 (HMGB1) and interleukin-6 (IL-6) in serum and lung tissue was determined by enzyme-linked immunosorbent assay. Activity of superoxide dismutase (SOD) in serum and lung tissue was detected by spectrophotometry. After arterial blood of other six mice in each group was collected for detection of arterial partial pressure of oxygen (PaO(2)), the wet and dry weight of lung tissue were weighted to calculate lung wet to dry weight ratio. The survival rates of the other twenty mice in each group during post injury days 7 were calculated. Data were processed with one-way analysis of variance, LSD test and log-rank test. Results: (1) At PIH 24, lung tissue of mice in sham injury group and hydrogen group showed no abnormality. Mice in pure burn group were with pulmonary interstitial edema, serious rupture of alveolar capillary wall, and infiltration of a large number of inflammatory cells. Mice in burn+ hydrogen group were with mild pulmonary interstitial edema, alveolar capillary congestion accompanied by slight rupture and bleeding, and the number of infiltration of inflammatory cells was smaller than that in pure burn group. The lung tissue injury pathological scores of mice in sham injury group, hydrogen group, pure burn group, and burn+ hydrogen group were (0.7±0.5), (0.8±0.5), (6.1±1.0), and (2.8±0.8) points, respectively. The lung tissue injury pathological score of mice in pure burn group was significantly higher than that in sham injury group ( P <0.001). The lung tissue injury pathological score of mice in burn+ hydrogen group was significantly lower than that in pure burn group ( P <0.001). (2) At PIH 24, the content of HMGB1 and IL-6 in serum and lung tissue of mice in hydrogen group was close to that in sham injury group (with P values above 0.05). The content of HMGB1 and IL-6 in serum and lung tissue of mice in pure burn group was significantly higher than that in sham injury group (with P values below 0.001). The content of HMGB1 and IL-6 in serum and lung tissue of mice in burn+ hydrogen group was significantly lower than that in pure burn group (with P values below 0.001). (3) At PIH 24, the activity of SOD in serum and lung tissue of mice in hydrogen group was close to that in sham injury group (with P values above 0.05). The activity of SOD in serum and lung tissue of mice in pure burn group was significantly lower than that in sham injury group (with P values below 0.001). The activity of SOD in serum and lung tissue of mice in burn+ hydrogen group was significantly higher than that in pure burn group (with P values below 0.001). (4) At PIH 24, there was no statistically significant difference in PaO(2) among the mice in four groups ( F =0.04, P >0.05). (5) At PIH 24, the ratios of lung wet to dry weight of mice in sham injury, hydrogen, pure burn, and burn+ hydrogen groups were 3.52±0.22, 3.61±0.24, 7.24±0.32, and 5.21±0.41, respectively. The ratio of lung wet to dry weight of mice in pure burn group was significantly higher than that in sham injury group ( P <0.001). The ratio of lung wet to dry weight of mice in burn+ hydrogen group was significantly lower than that in pure burn group ( P <0.001). (6) The survival rates of mice in sham injury group and hydrogen group during post injury days 7 were 100%. Compared with those in sham injury group, survival rates of mice in pure burn group from post injury days 3 to 7 were significantly decreased (with P values below 0.05). Compared with those in pure burn group, survival rates of mice in burn+ hydrogen group from post injury days 5 to 7 were significantly increased (with P values below 0.05). Conclusions: Hydrogen can significantly alleviate the infiltration of inflammatory cells and improve the pathological lesions of lung tissue of mice with severe burn. It has the effects of reducing inflammatory reaction and inhibiting oxidative stress, further showing the protective effect on the lung of burn mice.

Flammability of self-extinguishing kenaf/ABS nanoclays composite for aircraft secondary structure

NASA Astrophysics Data System (ADS)

Karunakaran, S.; Majid, D. L.; Mohd Tawil, M. L.

2016-10-01

This study investigates the flammability properties of kenaf fiber reinforced acrylonitrile butadiene styrene (ABS) with nanoclays composites. Natural fiber is one of the potential materials to be used with thermoplastic as a composite due to its attractive properties such as lightweight and strong. In this paper, flammability properties of this material are evaluated through Underwriters Laboratory 94 Horizontal Burning (UL94 HB), which has been conducted for both controlled and uncontrolled conditions, smoke density and limiting oxygen index tests (LOI). These flammability tests are in compliance with the Federal Aviation Regulation (FAR) requirement. The results from UL94 HB and smoke density tests show that the presence of nanoclays with effective composition of kenaf fiber reinforced ABS has enhanced the burning characteristics of the material by hindering propagation of flame spread over the surface of the material through char formation. Consequently, this decreases the burning rate and produces low amount of smoke during burning. On contrary, through LOI test, this material requires less oxygen to burn when exposed to fire, which hinders the enhancement of burning characteristics. This is due to burning mechanism exhibited by nanoclays that catalyzes barrier formation and flame propagation rate over the surface of the biocomposite material. Overall, these experimental results suggest that this biocomposite material is capable of self-extinguishing and possesses effective fire extinction. The observed novel synergism from the result obtained is promising to be implemented in secondary structures of aircraft with significant benefits such as cost-effective, lightweight and biodegradable self-extinguishing biocomposite.

Quantifying the effects of wildfire on changes in soil properties by surface burning of soils from the Boulder Creek Critical Zone Observatory

USGS Publications Warehouse

Wieting, Celeste; Ebel, Brian A.; Singha, Kamini

2017-01-01

Study regionThis study used intact soil cores collected at the Boulder Creek Critical Zone Observatory near Boulder, Colorado, USA to explore fire impacts on soil properties.Study focusThree soil scenarios were considered: unburned control soils, and low- and high-temperature burned soils. We explored simulated fire impacts on field-saturated hydraulic conductivity, dry bulk density, total organic carbon, and infiltration processes during rainfall simulations.New hydrological insights for the regionSoils burned to high temperatures became more homogeneous with depth with respect to total organic carbon and bulk density, suggesting reductions in near-surface porosity. Organic matter decreased significantly with increasing soil temperature. Tension infiltration experiments suggested a decrease in infiltration rates from unburned to low-temperature burned soils, and an increase in infiltration rates in high-temperature burned soils. Non-parametric statistical tests showed that field-saturated hydraulic conductivity similarly decreased from unburned to low-temperature burned soils, and then increased with high-temperature burned soils. We interpret these changes result from the combustion of surface and near-surface organic materials, enabling water to infiltrate directly into soil instead of being stored in the litter and duff layer at the surface. Together, these results indicate that fire-induced changes in soil properties from low temperatures were not as drastic as high temperatures, but that reductions in surface soil water repellency in high temperatures may increase infiltration relative to low temperatures.

Inhaled methoxyflurane for pain and anxiety relief during burn wound care procedures: an Australian case series.

PubMed

Wasiak, Jason; Mahar, Patrick D; Paul, Eldho; Menezes, Hana; Spinks, Anneliese B; Cleland, Heather

2014-02-01

Pain is a common and significant feature of burn injury. The use of intravenous opioids forms the mainstay of procedural burn pain management, but in an outpatient setting, the demand for novel agents that do not require parenteral access, are easy to administer and have a rapid onset are urgently needed. One such agent is the inhaled anaesthetic agent, methoxyflurane (MF). The aim of this study was to conduct a pilot investigation into the clinical effectiveness of MF inhaler on pain and anxiety scores in patients undergoing burn wound care procedures in an outpatient setting. A prospective case series involved recruiting patients undergoing a burn wound care procedure in an ambulatory burn care setting. Pain and anxiety were assessed using numerical rating scales. Overall, median numerical pain rating score was significantly higher post-dressing [pre-dressing: 2; interquartile range (IQR): 1-3 versus post-dressing: 3; IQR 1·5-4; P = 0·01], whereas median numerical anxiety score significantly reduced following the dressing (pre-dressing: 5; IQR 4-7 versus post-dressing: 2; IQR 1-2; P < 0·001). Our study suggests that there is a role for MF in the pain management armamentarium in those undergoing burn care procedures in the ambulatory care setting. However, there is an urgent need for larger case series and randomised controlled trials to determine its overall clinical effectiveness. © 2012 The Authors. International Wound Journal © 2012 Medicalhelplines.com Inc and John Wiley & Sons Ltd.

CHARACTERIZATION OF EMISSIONS FROM BURNING INCENSE

EPA Science Inventory

The primary objective of this study was to improve the characterization of particulate matter emissions from burning incense. Emissions of particulate matter were measured for 23 different types of incense using a cyclone/filter method. Emission rates for PM2.5 (particulate matte...

Operationally optimal maneuver strategy for spacecraft injected into sub-geosynchronous transfer orbit

NASA Astrophysics Data System (ADS)

Kiran, B. S.; Singh, Satyendra; Negi, Kuldeep

The GSAT-12 spacecraft is providing Communication services from the INSAT/GSAT system in the Indian region. The spacecraft carries 12 extended C-band transponders. GSAT-12 was launched by ISRO’s PSLV from Sriharikota, into a sub-geosynchronous Transfer Orbit (sub-GTO) of 284 x 21000 km with inclination 18 deg. This Mission successfully accomplished combined optimization of launch vehicle and satellite capabilities to maximize operational life of the s/c. This paper describes mission analysis carried out for GSAT-12 comprising launch window, orbital events study and orbit raising maneuver strategies considering various Mission operational constraints. GSAT-12 is equipped with two earth sensors (ES), three gyroscopes and digital sun sensor. The launch window was generated considering mission requirement of minimum 45 minutes of ES data for calibration of gyros with Roll-sun-pointing orientation in T.O. Since the T.O. period was a rather short 6.1 hr, required pitch biases were worked out to meet the gyro-calibration requirement. A 440 N Liquid Apogee Motor (LAM) is used for orbit raising. The objective of the maneuver strategy is to achieve desired drift orbit satisfying mission constraints and minimizing propellant expenditure. In case of sub-GTO, the optimal strategy is to first perform an in-plane maneuver at perigee to raise the apogee to synchronous level and then perform combined maneuvers at the synchronous apogee to achieve desired drift orbit. The perigee burn opportunities were examined considering ground station visibility requirement for monitoring the burn. Two maneuver strategies were proposed: an optimal five-burn strategy with two perigee burns centered around perigee#5 and perigee#8 with partial ground station visibility and three apogee burns with dual station visibility, a near-optimal five-burn strategy with two off-perigee burns at perigee#5 and perigee#8 with single ground station visibility and three apogee burns with dual station visibility. The range vector profiles were studied in the s/c frame during LAM burn phases and accurate polarization predictions were provided to supporting ground stations. The near optimal strategy was selected for implementation in order to ensure full visibility during each LAM burn. Contingency maneuver plans were generated in preparation for specified Propulsion system related contingencies. Maneuver plans were generated considering 3-sigma dispersions in T.O. GSAT-12 is positioned at 83 deg East longitude. The estimated operational life is about 11 years which was realized through operationally optimal maneuver strategy selected from the detailed mission analysis.

Symbolic hate: intention to intimidate, political ideology, and group association.

PubMed

Wiener, Richard L; Richter, Erin

2008-12-01

In Virginia v. Black (123 S.Ct. 1536, 2003), the Supreme Court ruled that the First Amendment did not bar statutes that prohibit cross burnings in which defendants acted with intention to intimidate others. Using a variety of symbols including cross burnings, swastikas, confederate flags, and skin fists, the current research tested how mock jurors used alternative actor intentions to judge culpability in symbolic hate speech cases. Only partially validating the Court's assumptions, participants rated guilt certainty highest when they believed the speakers conveyed direct threats, sometimes regardless of whether defendants intended to intimidate others. Further, results showed the level of perceived intimidation only partially mediated the relationship between type of fact pattern and guilt certainty ratings. While alternative intentions did produce different levels of intention to intimidate, path analysis showed that the participants' ratings of the defendant's intention to convey a direct threat influenced guilt certainty ratings in all cases. Perceived intimidation levels predicted culpability in only some of the cases and not for cross burning on private property.

Time-resolved analysis of particle emissions from residential biomass combustion - Emissions of refractory black carbon, PAHs and organic tracers

NASA Astrophysics Data System (ADS)

Nielsen, Ingeborg E.; Eriksson, Axel C.; Lindgren, Robert; Martinsson, Johan; Nyström, Robin; Nordin, Erik Z.; Sadiktsis, Ioannis; Boman, Christoffer; Nøjgaard, Jacob K.; Pagels, Joakim

2017-09-01

Time-resolved particle emissions from a conventional wood stove were investigated with aerosol mass spectrometry to provide links between combustion conditions, emission factors, mixing state of refractory black carbon and implications for organic tracer methods. The addition of a new batch of fuel results in low temperature pyrolysis as the fuel heats up, resulting in strong, short-lived, variable emission peaks of organic aerosol-containing markers of anhydrous sugars, such as levoglucosan (fragment at m/z 60). Flaming combustion results in emissions dominated by refractory black carbon co-emitted with minor fractions of organic aerosol and markers of anhydrous sugars. Full cycle emissions are an external mixture of larger organic aerosol-dominated and smaller thinly coated refractory black carbon particles. A very high burn rate results in increased full cycle mass emission factors of 66, 2.7, 2.8 and 1.3 for particulate polycyclic aromatic hydrocarbons, refractory black carbon, total organic aerosol and m/z 60, respectively, compared to nominal burn rate. Polycyclic aromatic hydrocarbons are primarily associated with refractory black carbon-containing particles. We hypothesize that at very high burn rates, the central parts of the combustion zone become air starved, leading to a locally reduced combustion temperature that reduces the conversion rates from polycyclic aromatic hydrocarbons to refractory black carbon. This facilitates a strong increase of polycyclic aromatic hydrocarbons emissions. At nominal burn rates, full cycle emissions based on m/z 60 correlate well with organic aerosol, refractory black carbon and particulate matter. However, at higher burn rates, m/z 60 does not correlate with increased emissions of polycyclic aromatic hydrocarbons, refractory black carbon and organic aerosol in the flaming phase. The new knowledge can be used to advance source apportionment studies, reduce emissions of genotoxic compounds and model the climate impacts of refractory black carbon, such as absorption enhancement by lensing.

Feasibility Study and Development of Modular Appliance Technologies, Centralized Heating (MATCH) Field Kitchen

DTIC Science & Technology

1994-07-01

including standby losses. The required input fuel rate is 261.000 Btu/hr ( LHV ) or 277,700 Btu/hr ( HHV ). The Becker burner used in the system is rated at 2...cost of -$6/gallon. Burning diesel fuel , with 20-percent excess air and a final exhaust temperature of 932°F, requires a fuel LHV input of 261,000 Btu...GPH diesel fuel burning rate, corresponding to 280.000 Btu/hr ( HHV ) input. The flue gases leave the fluid heater at a nominal temperature of 932°F

Flammability Parameters of Candles

NASA Astrophysics Data System (ADS)

Balog, Karol; Kobetičová, Hana; Štefko, Tomáš

2017-06-01

The paper deals with the assessment of selected fire safety characteristics of candles. Weight loss of a candle during the burning process, candle burning rate, soot index, heat release rate and yield of carbon oxides were determined. Soot index was determined according to EN 15426: 2007 - Candles - Specification for Sooting Behavior. All samples met the prescribed amount of produced soot. Weight loss, heat release rate and the yield of carbon oxides were determined for one selected sample. While yield of CO increased during the measurement, the yield of CO2 decreased by half in 40 minutes.

Space Shuttle Five-Segment Booster (Short Course)

NASA Technical Reports Server (NTRS)

Graves, Stanley R.; Rudolphi, Michael (Technical Monitor)

2002-01-01

NASA is considering upgrading the Space Shuttle by adding a fifth segment (FSB) to the current four-segment solid rocket booster. Course materials cover design and engineering issues related to the Reusable Solid Rocket Motor (RSRM) raised by the addition of a fifth segment to the rocket booster. Topics cover include: four segment vs. five segment booster, abort modes, FSB grain design, erosive burning, enhanced propellant burn rate, FSB erosive burning model development and hardware configuration.

Assessment of ion kinetic effects in shock-driven inertial confinement fusion implosions using fusion burn imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, M. J., E-mail: mros@lle.rochester.edu; Séguin, F. H.; Rinderknecht, H. G.

The significance and nature of ion kinetic effects in D{sup 3}He-filled, shock-driven inertial confinement fusion implosions are assessed through measurements of fusion burn profiles. Over this series of experiments, the ratio of ion-ion mean free path to minimum shell radius (the Knudsen number, N{sub K}) was varied from 0.3 to 9 in order to probe hydrodynamic-like to strongly kinetic plasma conditions; as the Knudsen number increased, hydrodynamic models increasingly failed to match measured yields, while an empirically-tuned, first-step model of ion kinetic effects better captured the observed yield trends [Rosenberg et al., Phys. Rev. Lett. 112, 185001 (2014)]. Here, spatiallymore » resolved measurements of the fusion burn are used to examine kinetic ion transport effects in greater detail, adding an additional dimension of understanding that goes beyond zero-dimensional integrated quantities to one-dimensional profiles. In agreement with the previous findings, a comparison of measured and simulated burn profiles shows that models including ion transport effects are able to better match the experimental results. In implosions characterized by large Knudsen numbers (N{sub K} ∼ 3), the fusion burn profiles predicted by hydrodynamics simulations that exclude ion mean free path effects are peaked far from the origin, in stark disagreement with the experimentally observed profiles, which are centrally peaked. In contrast, a hydrodynamics simulation that includes a model of ion diffusion is able to qualitatively match the measured profile shapes. Therefore, ion diffusion or diffusion-like processes are identified as a plausible explanation of the observed trends, though further refinement of the models is needed for a more complete and quantitative understanding of ion kinetic effects.« less

Assessment of ion kinetic effects in shock-driven inertial confinement fusion (ICF) implosions using fusion burn imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, M. J.; Séguin, F. H.; Amendt, P. A.

The significance and nature of ion kinetic effects in D³He-filled, shock-driven inertial confinement fusion implosions are assessed through measurements of fusion burn profiles. Over this series of experiments, the ratio of ion-ion mean free path to minimum shell radius (the Knudsen number, N K) was varied from 0.3 to 9 in order to probe hydrodynamic-like to strongly kinetic plasma conditions; as the Knudsen number increased, hydrodynamic models increasingly failed to match measured yields, while an empirically-tuned, first-step model of ion kinetic effects better captured the observed yield trends [Rosenberg et al., Phys. Rev. Lett. 112, 185001 (2014)]. Here, spatially resolvedmore » measurements of the fusion burn are used to examine kinetic ion transport effects in greater detail, adding an additional dimension of understanding that goes beyond zero-dimensional integrated quantities to one-dimensional profiles. In agreement with the previous findings, a comparison of measured and simulated burn profiles shows that models including ion transport effects are able to better match the experimental results. In implosions characterized by large Knudsen numbers (N K ~ 3), the fusion burn profiles predicted by hydrodynamics simulations that exclude ion mean free path effects are peaked far from the origin, in stark disagreement with the experimentally observed profiles, which are centrally peaked. In contrast, a hydrodynamics simulation that includes a model of ion diffusion is able to qualitatively match the measured profile shapes. Therefore, ion diffusion or diffusion-like processes are identified as a plausible explanation of the observed trends, though further refinement of the models is needed for a more complete and quantitative understanding of ion kinetic effects.« less

Analyzing wildfire exposure on Sardinia, Italy

NASA Astrophysics Data System (ADS)

Salis, Michele; Ager, Alan A.; Arca, Bachisio; Finney, Mark A.; Alcasena, Fermin; Bacciu, Valentina; Duce, Pierpaolo; Munoz Lozano, Olga; Spano, Donatella

2014-05-01

We used simulation modeling based on the minimum travel time algorithm (MTT) to analyze wildfire exposure of key ecological, social and economic features on Sardinia, Italy. Sardinia is the second largest island of the Mediterranean Basin, and in the last fifty years experienced large and dramatic wildfires, which caused losses and threatened urban interfaces, forests and natural areas, and agricultural productions. Historical fires and environmental data for the period 1995-2009 were used as input to estimate fine scale burn probability, conditional flame length, and potential fire size in the study area. With this purpose, we simulated 100,000 wildfire events within the study area, randomly drawing from the observed frequency distribution of burn periods and wind directions for each fire. Estimates of burn probability, excluding non-burnable fuels, ranged from 0 to 1.92x10-3, with a mean value of 6.48x10-5. Overall, the outputs provided a quantitative assessment of wildfire exposure at the landscape scale and captured landscape properties of wildfire exposure. We then examined how the exposure profiles varied among and within selected features and assets located on the island. Spatial variation in modeled outputs resulted in a strong effect of fuel models, coupled with slope and weather. In particular, the combined effect of Mediterranean maquis, woodland areas and complex topography on flame length was relevant, mainly in north-east Sardinia, whereas areas with herbaceous fuels and flat areas were in general characterized by lower fire intensity but higher burn probability. The simulation modeling proposed in this work provides a quantitative approach to inform wildfire risk management activities, and represents one of the first applications of burn probability modeling to capture fire risk and exposure profiles in the Mediterranean basin.

Assessment of ion kinetic effects in shock-driven inertial confinement fusion implosions using fusion burn imaging

NASA Astrophysics Data System (ADS)

Rosenberg, M. J.; Séguin, F. H.; Amendt, P. A.; Atzeni, S.; Rinderknecht, H. G.; Hoffman, N. M.; Zylstra, A. B.; Li, C. K.; Sio, H.; Gatu Johnson, M.; Frenje, J. A.; Petrasso, R. D.; Glebov, V. Yu.; Stoeckl, C.; Seka, W.; Marshall, F. J.; Delettrez, J. A.; Sangster, T. C.; Betti, R.; Wilks, S. C.; Pino, J.; Kagan, G.; Molvig, K.; Nikroo, A.

2015-06-01

The significance and nature of ion kinetic effects in D3He-filled, shock-driven inertial confinement fusion implosions are assessed through measurements of fusion burn profiles. Over this series of experiments, the ratio of ion-ion mean free path to minimum shell radius (the Knudsen number, NK) was varied from 0.3 to 9 in order to probe hydrodynamic-like to strongly kinetic plasma conditions; as the Knudsen number increased, hydrodynamic models increasingly failed to match measured yields, while an empirically-tuned, first-step model of ion kinetic effects better captured the observed yield trends [Rosenberg et al., Phys. Rev. Lett. 112, 185001 (2014)]. Here, spatially resolved measurements of the fusion burn are used to examine kinetic ion transport effects in greater detail, adding an additional dimension of understanding that goes beyond zero-dimensional integrated quantities to one-dimensional profiles. In agreement with the previous findings, a comparison of measured and simulated burn profiles shows that models including ion transport effects are able to better match the experimental results. In implosions characterized by large Knudsen numbers (NK ˜ 3), the fusion burn profiles predicted by hydrodynamics simulations that exclude ion mean free path effects are peaked far from the origin, in stark disagreement with the experimentally observed profiles, which are centrally peaked. In contrast, a hydrodynamics simulation that includes a model of ion diffusion is able to qualitatively match the measured profile shapes. Therefore, ion diffusion or diffusion-like processes are identified as a plausible explanation of the observed trends, though further refinement of the models is needed for a more complete and quantitative understanding of ion kinetic effects.

Assessment of ion kinetic effects in shock-driven inertial confinement fusion (ICF) implosions using fusion burn imaging

DOE PAGES

Rosenberg, M. J.; Séguin, F. H.; Amendt, P. A.; ...

2015-06-02

The significance and nature of ion kinetic effects in D³He-filled, shock-driven inertial confinement fusion implosions are assessed through measurements of fusion burn profiles. Over this series of experiments, the ratio of ion-ion mean free path to minimum shell radius (the Knudsen number, N K) was varied from 0.3 to 9 in order to probe hydrodynamic-like to strongly kinetic plasma conditions; as the Knudsen number increased, hydrodynamic models increasingly failed to match measured yields, while an empirically-tuned, first-step model of ion kinetic effects better captured the observed yield trends [Rosenberg et al., Phys. Rev. Lett. 112, 185001 (2014)]. Here, spatially resolvedmore » measurements of the fusion burn are used to examine kinetic ion transport effects in greater detail, adding an additional dimension of understanding that goes beyond zero-dimensional integrated quantities to one-dimensional profiles. In agreement with the previous findings, a comparison of measured and simulated burn profiles shows that models including ion transport effects are able to better match the experimental results. In implosions characterized by large Knudsen numbers (N K ~ 3), the fusion burn profiles predicted by hydrodynamics simulations that exclude ion mean free path effects are peaked far from the origin, in stark disagreement with the experimentally observed profiles, which are centrally peaked. In contrast, a hydrodynamics simulation that includes a model of ion diffusion is able to qualitatively match the measured profile shapes. Therefore, ion diffusion or diffusion-like processes are identified as a plausible explanation of the observed trends, though further refinement of the models is needed for a more complete and quantitative understanding of ion kinetic effects.« less

Transport pathways for Asian pollution outflow over the Pacific: Interannual and seasonal variations

NASA Astrophysics Data System (ADS)

Liu, Hongyu; Jacob, Daniel J.; Bey, Isabelle; Yantosca, Robert M.; Duncan, Bryan N.; Sachse, Glen W.

2003-10-01

The meteorological pathways contributing to Asian pollution outflow over the Pacific are examined with a global three-dimensional model analysis of CO observations from the Transport and Chemical Evolution over the Pacific (TRACE-P) aircraft mission (February-April 2001). The model is used also to place the TRACE-P observations in an interannual (1994-2001) and seasonal context. The major process driving Asian pollution outflow in spring is frontal lifting ahead of southeastward-moving cold fronts (the leading edge of cold surges) and transport in the boundary layer behind the cold fronts. Orographic lifting over central and eastern China combines with the cold fronts to promote the transport of Chinese pollution to the free troposphere. Outflow of seasonal biomass burning in Southeast Asia during spring takes place mostly by deep convection but also by northeastward transport and frontal lifting, mixing with the anthropogenic outflow. Boundary layer outflow over the western Pacific is largely devoid of biomass burning influence. European and African (biomass burning) plumes in Asian outflow during TRACE-P were weak (<60 ppbv and 20 ppbv CO, respectively) and were not detectable in the observations because of superposition of the much larger Asian pollution signal. Spring 2001 (La Niña) was characterized by unusually frequent cold surge events in the Asian Pacific rim and strong convection in Southeast Asia, leading to unusually strong boundary layer outflow of anthropogenic emissions and convective outflow of biomass burning emissions in the upper troposphere. The Asian outflow flux of CO to the Pacific is found to vary seasonally by a factor of 3-4 (maximum in March and minimum in summer). The March maximum results from frequent cold surge events and seasonal biomass burning emissions.

Transport Pathways for Asian Pollution Outflow Over the Pacific: Interannual and Seasonal Variations

NASA Technical Reports Server (NTRS)

Liu, Hong-Yu; Jacob, Daniel J.; Bey, Isabelle; Yantosca, Robert M.; Duncan, Bryan N.; Sachse, Glen W.

2003-01-01

The meteorological pathways contributing to Asian pollution outflow over the Pacific are examined with a global three-dimensional model analysis of CO observations from the Transport and Chemical Evolution over the Pacific (TRACE-P) aircraft mission (February-April 2001). The model is used also to place the TRACE-P observations in an interannual (1994-2001) and seasonal context. The major process driving Asian pollution outflow in spring is frontal lifting ahead of southeastward-moving cold fronts (the leading edge of cold surges) and transport in the boundary layer behind the cold fronts. Orographic lifting over central and eastern China combines with the cold fronts to promote the transport of Chinese pollution to the free troposphere. Outflow of seasonal biomass burning in Southeast Asia during spring takes place mostly by deep convection but also by northeastward transport and frontal lifting, mixing with the anthropogenic outflow. Boundary layer outflow over the western Pacific is largely devoid of biomass burning influence. European and African (biomass burning) plumes in Asian outflow during TRACE-P were weak (less than 60 ppbv and 20 ppbv CO, respectively) and were not detectable in the observations because of superposition of the much larger Asian pollution signal. Spring 2001 (La Nina) was characterized by unusually frequent cold surge events in the Asian Pacific rim and strong convection in Southeast Asia, leading to unusually strong boundary layer outflow of anthropogenic emissions and convective outflow of biomass burning emissions in the upper troposphere. The Asian outflow flux of CO to the Pacific is found to vary seasonally by a factor of 3-4 (maximum in March and minimum in summer). The March maximum results from frequent cold surge events and seasonal biomass burning emissions.

The influence of meteorological factors and biomass burning on surface ozone concentrations at Tanah Rata, Malaysia

NASA Astrophysics Data System (ADS)

Toh, Ying Ying; Lim, Sze Fook; von Glasow, Roland

2013-05-01

The surface ozone concentrations at the Tanah Rata regional Global Atmosphere Watch (GAW) station, Malaysia (4°28‧N, 101°23‧E, 1545 m above Mean Sea Level (MSL)) from June 2006 to August 2008 were analyzed in this study. Overall the ozone mixing ratios are very low; the seasonal variations show the highest mixing ratios during the Southwest monsoon (average 19.1 ppb) and lowest mixing ratios during the spring intermonsoon (average 14.2 ppb). The diurnal variation of ozone is characterised by an afternoon maximum and night time minimum. The meteorological conditions that favour the formation of high ozone levels at this site are low relative humidity, high temperature and minimum rainfall. The average ozone concentration is lower during precipitation days compared to non-precipitation days. The hourly averaged ozone concentrations show significant correlations with temperature and relative humidity during the Northeast monsoon and spring intermonsoon. The highest concentrations are observed when the wind is blowing from the west. We found an anticorrelation between the atmospheric pressure tide and ozone concentrations. The ozone mixing ratios do not exceed the recommended Malaysia Air Quality Guidelines for 1-h and 8-h averages. Five day backward trajectories on two high ozone episodes in 07 August 2006 (40.0 ppb) and 24 February 2008 (45.7 ppb) are computed using the HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model to investigate the origin of the pollutants and influence of regional transport. The high ozone episode during 07 August 2006 (burning season during southwest monsoon) is mainly attributed to regional transport from biomass burning in Sumatra, whereas favourable meteorological conditions (i.e. low relative humidity, high temperature and solar radiation, zero rainfall) and long range transport from Indo-China have elevated the ozone concentrations during 24 February 2008.

Effects of prescribed burning on marsh-elevation change and the risk of wetland loss

USGS Publications Warehouse

McKee, Karen L.; Grace, James B.

2012-01-01

Marsh-elevation change is the net effect of biophysical processes controlling inputs versus losses of soil volume. In many marshes, accumulation of organic matter is an important contributor to soil volume and vertical land building. In this study, we examined how prescribed burning, a common marsh-management practice, may affect elevation dynamics in the McFaddin National Wildlife Refuge, Texas by altering organic-matter accumulation. Experimental plots were established in a brackish marsh dominated by Spartina patens, a grass found throughout the Gulf of Mexico and Atlantic marshes. Experimental plots were subjected to burning and nutrient-addition treatments and monitored for 3.5 years (April 2005 – November 2008). Half of the plots were burned once in 2006; half of the plots were fertilized seasonally with nitrogen, phosphorus, and potassium. Before and after the burns, seasonal measurements were made of soil physicochemistry, vegetation structure, standing and fallen plant biomass, aboveground and belowground production, decomposition, and accretion and elevation change (measured with Surface Elevation Tables (SET)). Movements in different soil strata (surface, root zone, subroot zone) were evaluated to identify which processes were contributing to elevation change. Because several hurricanes occurred during the study period, we also assessed how these storms affected elevation change rates. The main findings of this study were as follows: 1. The main drivers of elevation change were accretion on the marsh surface and subsurface movement below the root zone, but the relative influence of these processes varied temporally. Prior to Hurricanes Gustav and Ike (September 2008), the main driver was subsurface movement; after the hurricane, both accretion and subsurface movement were important. 2. Prior to Hurricanes Gustav and Ike, rates of elevation gain and accretion above a marker horizon were higher in burned plots compared to nonburned plots, whereas nutrient addition had no detectable influence on elevation dynamics. 3. Burning decreased standing and fallen plant litter, reducing fuel load. Hurricanes Gustav and Ike also removed fallen litter from all plots. 4. Aboveground and belowground production rates varied annually but were unaffected by burning and nutrient treatments. 5. Decomposition (of a standard cellulose material) in upper soil layers was increased in burned plots but was unaffected by nutrient treatments. 6. Soil physicochemistry was unaffected by burning or nutrient treatments. 7. The elevation deficit (difference between rate of submergence and vertical land development) prior to hurricanes was less in burned plots (6.2 millimeters per year [mm yr-1]) compared to nonburned plots (7.2 mm yr-1). 8. Storm sediments delivered by Hurricane Ike raised elevations an average of 7.4 centimeters (cm), which countered an elevation deficit that had accrued over 11 years. Our findings provide preliminary insights into elevation dynamics occurring in brackish marshes of the Texas Chenier Plain under prescribed fire management. The results of this study indicate that prescribed burning conducted at 3- to 5-year intervals is not likely to negatively impact the long-term sustainability of S. patens-dominated brackish marshes at McFaddin National Wildlife Refuge and may offset existing elevation deficits by ≈ 1 mm yr-1. The primary drivers of elevation change varied in time and space, leading to a more complex situation in terms of predicting how disturbances may alter elevation trajectories. The potential effect of burning on elevation change in other marshes will depend on several site-specific factors, including geomorphic/ sedimentary setting, tide range, local rate of relative sea level rise, plant species composition, additional management practices (for example, for flood control), and disturbance types and frequency (for example, hurricanes or herbivore grazing). Increasing the scope of inference would require installation of SETs in replicate marshes undergoing different prescribed fire intervals and in different geomorphic settings (with different hurricane frequencies and/or different sedimentary settings). Multiple locations along the Gulf and Atlantic coasts where prescribed fire is used as a management tool could provide the appropriate setting for these installations.

20 CFR 10.406 - What are the maximum and minimum rates of compensation in disability cases?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 20 Employees' Benefits 1 2011-04-01 2011-04-01 false What are the maximum and minimum rates of... Impairment § 10.406 What are the maximum and minimum rates of compensation in disability cases? (a... monthly pay does not include locality adjustments.) Compensation for Death ...

20 CFR 10.406 - What are the maximum and minimum rates of compensation in disability cases?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 20 Employees' Benefits 1 2014-04-01 2012-04-01 true What are the maximum and minimum rates of... Impairment § 10.406 What are the maximum and minimum rates of compensation in disability cases? (a... monthly pay does not include locality adjustments.) Compensation for Death ...

20 CFR 10.406 - What are the maximum and minimum rates of compensation in disability cases?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 20 Employees' Benefits 1 2013-04-01 2012-04-01 true What are the maximum and minimum rates of... Impairment § 10.406 What are the maximum and minimum rates of compensation in disability cases? (a... monthly pay does not include locality adjustments.) Compensation for Death ...

20 CFR 10.406 - What are the maximum and minimum rates of compensation in disability cases?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 20 Employees' Benefits 1 2012-04-01 2012-04-01 false What are the maximum and minimum rates of... Impairment § 10.406 What are the maximum and minimum rates of compensation in disability cases? (a... monthly pay does not include locality adjustments.) Compensation for Death ...

20 CFR 10.406 - What are the maximum and minimum rates of compensation in disability cases?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false What are the maximum and minimum rates of... Impairment § 10.406 What are the maximum and minimum rates of compensation in disability cases? (a... monthly pay does not include locality adjustments.) Compensation for Death ...

Tailorable Burning Behavior of Ti14 Alloy by Controlling Semi-Solid Forging Temperature

PubMed Central

Chen, Yongnan; Yang, Wenqing; Zhan, Haifei; Zhang, Fengying; Huo, Yazhou; Zhao, Yongqing; Song, Xuding; Gu, Yuantong

2016-01-01

Semi-solid processing (SSP) is a popular near-net-shape forming technology for metals, while its application is still limited in titanium alloy mainly due to its low formability. Recent works showed that SSP could effectively enhance the formability and mechanical properties of titanium alloys. The processing parameters such as temperature and forging rate/ratio, are directly correlated with the microstructure, which endow the alloy with different chemical and physical properties. Specifically, as a key structural material for the advanced aero-engine, the burn resistant performance is a crucial requirement for the burn resistant titanium alloy. Thus, this work aims to assess the burning behavior of Ti14, a kind of burn resistant alloy, as forged at different semi-solid forging temperatures. The burning characteristics of the alloy are analyzed by a series of burning tests with different burning durations, velocities, and microstructures of burned sample. The results showed that the burning process is highly dependent on the forging temperature, due to the fact that higher temperatures would result in more Ti2Cu precipitate within grain and along grain boundaries. Such a microstructure hinders the transport of oxygen in the stable burning stage through the formation of a kind of oxygen isolation Cu-enriched layer under the burn product zone. This work suggests that the burning resistance of the alloy can be effectively tuned by controlling the temperature during the semi-solid forging process. PMID:28773820

The role of alternative therapy in the management of partial thickness burns of the face--experience with the use of moist exposed burn ointment (MEBO) compared with silver sulphadiazine.

PubMed

Ang, E S; Lee, S T; Gan, C S; See, P; Chan, Y H; Ng, L H; Machin, D

2000-01-01

Conventional management of partial thickness facial burn wounds includes the use of silver sulphadiazine dressings. Silver sulphadiazine forms an overlying slough that makes wound healing assessment difficult. Moist exposed burn ointment (MEBO) has been proposed as the ideal burn wound dressing both for burns of the face and other sites. Proponents of MEBO claim that it accelerates wound healing and results in scarless wound healing and at the same time reduce bacterial colonisation and the need for analgesics. We present here our experience with MEBO in the management of partial thickness burns of the face. One hundred and fifteen patients with partial thickness burns were randomly assigned to conventional treatment or MEBO. Out of this, 112 were analysed. Thirty-nine patients sustained facial burns; 17 received MEBO and 22 received silver sulphadiazine. Patients were followed up daily until the burn wounds were reduced by 75% of original body surface area (BSA). In patients with facial burns, MEBO was similar to silver sulphadiazine therapy with respect to rate of wound healing. Minimal slough was present over the wounds in MEBO-treated wounds resulting in clearer assessment of healing progression. Advantages of MEBO as compared to silver sulphadiazine in the management of partial thickness burns of the face include convenient change of dressing and easier assessment of healing progression. This suggests that MEBO is a useful alternative therapy for partial thickness burns of the face.

Burn Survivor Quality of Life and Barriers to Support Program Participation.

PubMed

Baldwin, Stephanie; Yuan, Haimao; Liao, Junlin; Grieve, Brian; Heard, Jason; Wibbenmeyer, Lucy A

2018-03-29

After a serious burn, re-entry into family life, society, and work can be incredibly difficult. Support services such as professional counseling and peer support play a key role for recovering survivors. Herein, we sought to identify support service participation rates, barriers to participation, and quality of life (QOL) among burn survivors treated at a regional burn center. A survey of burn survivors over 18 years old treated for a burn for 5 days or greater between 2006 and 2016 were invited to participate in a survey. The three-part survey contained sections covering demographics, questions regarding support program (SP) awareness, needs and participation, and QOL surveys. Univariate and multivariate regression analyses were performed to identify factors related to SP participation and QOL scores. Nine hundred sixty-eight patients were eligible; 150 responses were received. Over one third (40, 31%) of the responding survivors wanted support, but only half of those (23, 17%) participated in SPs. Distance and awareness of the available programs were two barriers to participation. Those attending SPs were more likely to have had larger burns (OR = 3.7, P = 0.05) and visible burns (OR = 7.5, P = 0.031). Lower scores on selected QOL scales were associated with burns more than 30%, visible burns, female gender, time from burn, and age group. A sizable number of burn survivors want SPs. However, access to these services and advertising their existence are hurdles to overcome. Future burn survivor SPs should focus on psychosocial stresses identified in the QOL assessments.

The effect of Burns & Wounds (B&W)/burdock leaf therapy on burn-injured Amish patients: a pilot study measuring pain levels, infection rates, and healing times.

PubMed

Kolacz, Nicole M; Jaroch, Mark T; Bear, Monica L; Hess, Rosanna F

2014-12-01

The purposes of this pilot study were to measure pain associated with dressing changes, assess the presence of infection, and document healing times of burn-injured Amish in central Ohio using an herbal therapy consisting of Burns and Wounds™ ointment (B&W) and burdock (Arctium ssp.) leaves. B&W contains honey, lanolin, olive oil, wheat germ oil, marshmallow root, Aloe vera gel, wormwood, comfrey root, white oak bark, lobelia inflata, vegetable glycerin, bees wax, and myrrh. A prospective, case series design guided the study within a community-based participatory research framework. Amish burn dressers provided burn care. Registered nurses monitored each case and documented findings. Pain scores were noted and burns were inspected for infection during dressing changes; healing times were measured from day of burn to complete closure of the skin. All cases were photographed. Between October 2011 and May 2013, five Amish were enrolled. All had first- and second-degree burns. B&W/burdock leaf dressing changes caused minimal or no pain; none of the burns became infected, and healing times averaged less than 14 days. The use of this herbal remedy appears to be an acceptable alternative to conventional burn care for these types of burns. The trauma of dressing changes was virtually nonexistent. Nurses working in communities with Amish residents should be aware of this herbal-based method of burn care and monitor its use when feasible. © The Author(s) 2014.

An Experimental Determination of Subatmospheric Burning Rates and Critical Diameters for AP/HTPB Propellant

DTIC Science & Technology

1988-12-01

round uses an AP/HTPB propellant in the projectile base to reduce base drag during flight . Subatmospheric burning rates, simulating operation at...the partial vacuum created at the projectile base in flight . The combustion gases escape the combustion chamber through an unchoked port in the...determination. Combustion of the sample was video recorded by a system with both synchronized electronic strobe and shutter. The camera captures 60 fields

What could have caused pre-industrial biomass burning emissions to exceed current rates?

NASA Astrophysics Data System (ADS)

van der Werf, G. R.; Peters, W.; van Leeuwen, T. T.; Giglio, L.

2012-08-01

Recent studies based on trace gas mixing ratios in ice cores and charcoal data indicate that biomass burning emissions over the past millennium exceeded contemporary emissions by up to a factor of 4 for certain time periods. This is surprising because various sources of biomass burning are linked with population density, which has increased over the past centuries. Here we have analyzed how emissions from several biomass burning sources could have fluctuated to yield emissions that are in correspondence with recent results based on ice core mixing ratios of carbon monoxide (CO) and its isotopic signature measured at South Pole station (SPO). Based on estimates of contemporary fire emissions and the TM5 chemical transport model, we found that CO mixing ratios at SPO are more sensitive to emissions from South America and Australia than from Africa, and are relatively insensitive to emissions from the Northern Hemisphere. We then explored how various biomass burning sources may have varied over the past centuries and what the resulting emissions and corresponding CO mixing ratio at SPO would be, using population density variations to reconstruct sources driven by humans (e.g. fuelwood burning) and a new model to relate savanna emissions to changes in fire return times. We found that to match the observed ice core CO data all savannas in the Southern Hemisphere had to burn annually, or bi-annually in combination with deforestation and slash and burn agriculture matching current levels despite much lower population densities and lack of machinery to aid the deforestation process. While possible, these scenarios are unlikely and in conflict with current literature. However, we do show the large potential for increased emissions from savannas in a pre-industrial world. This is mainly because in the past, fuel beds were probably less fragmented compared to the current situation; we show that the majority of savannas have not burned in the past 10 yr, even in Africa which is considered "the burning continent". Our new modelling results, together with existing literature, indicate that no definitive conclusions can be drawn about unprecedentedly high or low biomass burning rates from current data analyses.

Biomass burning a driver for global change

DOE Office of Scientific and Technical Information (OSTI.GOV)

Levine, J.S.; Cofer, W.R. III; Cahoon, D.R. Jr.

1995-03-01

Recent research has identified another biospheric process that has instantaneous and longer term effects on the production of atmospheric gases: biomass burning. Biomass burning includes the burning of the world`s vegetation-forests, savannas. and agricultural lands, to clear the land and change its use. Only in the past decade have researchers realized the important contributions of biomass burning to the global budgets of many radiatively and chemically active gases - carbon dioxide, methane, nitric oxide, tropospheric ozone, methyl chloride - and elemental carbon particulates. International field experiments and satellite data are yielding a clearer understanding of this important global source ofmore » atmospheric gases and particulates. It is seen that in addition to being a significant instantaneous global source of atmospheric gases and particulates, burning enhances the biogenic emissions of nitric oxide and nitrous oxide from the world`s soils. Biomass burning affects the reflectivity and emissivity of the Earth`s surface as well as the hydrological cycle by changing rates of land evaporation and water runoff. For these reasons, it appears that biomass burning is a significant driver of global change. 20 refs., 4 figs., 2 tabs.« less

FEASIBILITY OF BURNING COAL IN CATALYTIC COMBUSTORS

EPA Science Inventory

The report gives results of a study, showing that pulverized coal can be burned in a catalytic combustor. Pulverized coal combustion in catalytic beds is markedly different from gaseous fuel combustion. Gas combustion gives uniform bed temperatures and reaction rates over the ent...

The burning issue of white phosphorus: a case report and review of the literature.

PubMed

Aviv, Uri; Kornhaber, Rachel; Harats, Moti; Haik, Josef

2017-01-01

Burns from white phosphorus are rare and remain a challenge for clinicians. White phosphorus burns are often associated with smaller surface areas and high morbidity rates. Classed as a chemical burn, white phosphorus is used for military purposes and within industry, for the manufacture of fireworks and agricultural products. In this report, we discuss the case of a 40 years old female who sustained 2% Total Body Surface Area partial to full thickness burns from white phosphorus. The burns were treated conservatively with mafenide acetate on the medial calf and dorsum of foot and Flaminal Forte was used for the palmar region. The patient was discharged 22 days after admission and followed up in the outpatient clinic. Despite the use of pressure garments, hypertrophic scarring began to develop on the dorsum of her right foot. During peacetime, white phosphorus possess a significant danger to civilians. Awareness of the unique nature of white phosphorus among military burn clinicians should be emphasized.

The effect of levamisole on mortality rate among patients with severe burn injuries

PubMed Central

Fatemi, Mohammad Javad; Salehi, Hamid; Akbari, Hossein; Alinejad, Faranak; Saberi, Mohsen; Mousavi, Seyed Jaber; Soltani, Majid; Taghavi, Shahrzad; Payandan, Hossein

2013-01-01

Background: Burn injuries are one of the main causes of mortality and morbidity throughout the world and burn patients have higher chances for infection due to their decreased immune resistance. Levamisole, as an immunomodulation agent, stimulates the immune response against infection. Materials and Methods: This randomized clinical trial was conducted in Motahari Burn Center, Tehran, Iran. Patients who had second- or third-degree burn with involvement of more than 50% of total body surface area (TBSA) were studied. The levamisole group received levamisole tablet, 100 mg per day. Meantime, both the levamisole and control groups received the standard therapy of the Burn Center, based on a standard protocol. Then, the outcome of the patients was evaluated. Results: 237 patients entered the study. After excluding 42 patients with inhalation injury, electrical and chemical burns, and the patients who died in the first 72 h, 195 patients remained in the study, including 110 patients in the control group and 85 in the treatment group. The mean age of all patients (between 13 to 64 years) was 33.29 ± 11.39 years (Mean ± SD), and it was 33.86 ± 11.45 years in the control group and 32.57 ± 11.32 years in the treatment group. The mean percentage of TBSA burn was 64.50 ± 14.34 and 68.58 ± 14.55 for the levamisole and control groups, respectively, with the range of 50-100% and 50-95% TBSA. The mortality rate was 68 (61.8%) patients in the control group and 50 (58.8%) patients in the treatment group (P = 0.8). Conclusion: According to this study, there was no significant relationship between improvement of mortality and levamisole consumption. PMID:24381625

Pain control in a randomized, controlled, clinical trial comparing moist exposed burn ointment and conventional methods in patients with partial-thickness burns.

PubMed

Ang, Erik; Lee, S-T; Gan, Christine S-G; Chan, Y-H; Cheung, Y-B; Machin, D

2003-01-01

Conventional management of partial-thickness burn wounds includes the use of paraffin gauze dressing, frequently with topical silver-based antibacterial creams. Some creams form an overlying slough that renders wound assessment difficult and are painful upon application. An alternative to conventional management, moist exposed burn ointment (MEBO), has been proposed as a topical agent that may accelerate wound healing and have antibacterial and analgesic properties. One hundred fifteen patients with partial-thickness burns were randomly assigned to conventional (n = 58) or MEBO treatment (n = 57). A verbal numerical rating score of pain was made in the morning, after burn dressing, and some 8 hours later. Patient pain profiles were summarized by locally weighted regression smoothing technique curves and the difference between treatments estimated using multilevel regression techniques. Mean verbal numerical rating scale pain levels (cm) in week 1 for all patients were highest at 3.2 for the after dressing assessment, lowest in the evening at 2.6, and intermediate in the morning at 3.0. This pattern continued at similar levels in week 2 and then declined by a mean of 0.5 in all groups in week 3. There was little evidence to suggest a difference in pain levels by treatment group with the exception of the postdressing pain levels in the first week when those receiving MEBO had a mean level of 0.7 cm (95% confidence interval, 0.2 to 1.1) lower than those on conventional therapy. MEBO appeared to bring greater pain relief for the postdressing assessment during the first week after burns. This initial relief, together with comparable pain levels experienced on other occasions, indicates that MEBO could be an alternative to conventional burns management.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Karlstad, M.D.; DeMichele, S.J.; Istfan, N.

The effects of burn and first-pass splanchnic leucine extraction (FPE) on protein kinetics and energy expenditure were assessed by measuring O/sub 2/ consumption, CO/sub 2/ production, nitrogen balance, leucine kinetics, and tissue fractional protein synthetic rates (FSR-%/day) in enterally fed rats. Anesthetized male rats (200 g) were scalded on their dorsum with boiling water (25-30% body surface area) and enterally fed isovolemic diets that provided 60 kcal/day and 2.4 g of amino acids/day for 3 days. Controls were not burned. An intravenous or intragastric infusion of L-(1-/sup 14/C)leucine was used to assess protein kinetics on day 3. FPE was takenmore » as the ratio of intragastric to intravenous plasma leucine specific activity. There was a 69% reduction in cumulative nitrogen balance (P less than 0.001) and a 17-19% increase in leucine oxidation (P less than 0.05) and total energy expenditure (P less than 0.01) in burned rats. A 15% decrease in plasma leucine clearance (P less than 0.05) was accompanied by a 20% increase in plasma (leucine) (P less than 0.01) in burned rats. Burn decreased rectus muscle FSR from 5.0 +/- 0.4 to 3.5 +/- 0.5 (P less than 0.05) and increased liver FSR from 19.0 +/- 0.5 to 39.2 +/- 3.4 (P less than 0.01). First pass extraction of dietary leucine by the splanchnic bed was 8% in controls and 26% in burned rats. Leucine kinetics corrected for FPE showed increased protein degradation with burn that was not evident without FPE correction. This hypermetabolic burn model can be useful in the design of enteral diets that optimize rates of protein synthesis and degradation.« less

Brown adipose tissue and its modulation by a mitochondria-targeted peptide in rat burn injury-induced hypermetabolism

PubMed Central

Yo, Kikuo; Yu, Yong-Ming; Zhao, Gaofeng; Bonab, Ali A.; Aikawa, Naoki; Tompkins, Ronald G.

2013-01-01

Hypermetabolism is a prominent feature of burn injury, and altered mitochondria function is presumed to contribute to this state. Recently, brown adipose tissue (BAT) was found to be present not only in rodents but also in humans, and its activity is associated with resting metabolic rate. In this report, we elucidate the relationship between burn injury-induced hypermetabolism and BAT activity and the possible role of the mitochondria-targeted peptide SS31 in attenuating burn injury-induced hypermetabolism by using a rat burn injury model. We demonstrate that burn injury induces morphological changes in interscapular BAT (iBAT). Burn injury was associated with iBAT activation, and this effect was positively correlated with increased energy expenditure. BAT activation was associated with augmentation of mitochondria biogenesis, and UCP1 expression in the isolated iBAT mitochondria. In addition, the mitochondria-targeted peptide SS31 attenuated burn injury-induced hypermetabolism, which was accompanied by suppression of UCP1 expression in isolated mitochondria. Our results suggest that BAT plays an important role in burn injury-induced hypermetabolism through its morphological changes and expression of UCP1. PMID:23169784