50 CFR 648.93 - Monkfish minimum fish sizes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Monkfish minimum fish sizes. 648.93... Measures for the NE Multispecies and Monkfish Fisheries § 648.93 Monkfish minimum fish sizes. (a) General... fish size requirements established in this section. Minimum Fish Sizes (Total Length/Tail Length) Total...

50 CFR 648.93 - Monkfish minimum fish sizes.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Monkfish minimum fish sizes. 648.93... Measures for the NE Multispecies and Monkfish Fisheries § 648.93 Monkfish minimum fish sizes. (a) General... fish size requirements established in this section. Minimum Fish Sizes (Total Length/Tail Length) Total...

Unified description of the slip phenomena in sheared polymer films: A molecular dynamics study

NASA Astrophysics Data System (ADS)

Priezjev, Nikolai

2010-03-01

The dynamic behavior of the slip length in shear flow of polymer melts past atomically smooth surfaces is investigated using MD simulations. The polymer melt was modeled as a collection of FENE-LJ bead-spring chains. We consider shear flow conditions at low pressures and weak wall-fluid interaction energy so that fluid velocity profiles are linear throughout the channel at all shear rates examined. In agreement with earlier studies we confirm that for shear- thinning fluids the slip length passes through a local minimum at low shear rates and then increases rapidly at higher shear rates. We found that the rate dependence of the slip length depends on the lattice orientation at high shear rates. The MD results show that the ratio of slip length to viscosity follows a master curve when plotted as a function of a single variable that depends on the structure factor, contact density and temperature of the first fluid layer near the solid wall. The universal dependence of the slip length holds for a number of parameters of the interface: fluid density and structure (chain length), wall-fluid interaction energy, wall density, lattice orientation, thermal or solid walls.

PRESEE: An MDL/MML Algorithm to Time-Series Stream Segmenting

PubMed Central

Jiang, Yexi; Tang, Mingjie; Yuan, Changan; Tang, Changjie

2013-01-01

Time-series stream is one of the most common data types in data mining field. It is prevalent in fields such as stock market, ecology, and medical care. Segmentation is a key step to accelerate the processing speed of time-series stream mining. Previous algorithms for segmenting mainly focused on the issue of ameliorating precision instead of paying much attention to the efficiency. Moreover, the performance of these algorithms depends heavily on parameters, which are hard for the users to set. In this paper, we propose PRESEE (parameter-free, real-time, and scalable time-series stream segmenting algorithm), which greatly improves the efficiency of time-series stream segmenting. PRESEE is based on both MDL (minimum description length) and MML (minimum message length) methods, which could segment the data automatically. To evaluate the performance of PRESEE, we conduct several experiments on time-series streams of different types and compare it with the state-of-art algorithm. The empirical results show that PRESEE is very efficient for real-time stream datasets by improving segmenting speed nearly ten times. The novelty of this algorithm is further demonstrated by the application of PRESEE in segmenting real-time stream datasets from ChinaFLUX sensor networks data stream. PMID:23956693

PRESEE: an MDL/MML algorithm to time-series stream segmenting.

PubMed

Xu, Kaikuo; Jiang, Yexi; Tang, Mingjie; Yuan, Changan; Tang, Changjie

2013-01-01

Time-series stream is one of the most common data types in data mining field. It is prevalent in fields such as stock market, ecology, and medical care. Segmentation is a key step to accelerate the processing speed of time-series stream mining. Previous algorithms for segmenting mainly focused on the issue of ameliorating precision instead of paying much attention to the efficiency. Moreover, the performance of these algorithms depends heavily on parameters, which are hard for the users to set. In this paper, we propose PRESEE (parameter-free, real-time, and scalable time-series stream segmenting algorithm), which greatly improves the efficiency of time-series stream segmenting. PRESEE is based on both MDL (minimum description length) and MML (minimum message length) methods, which could segment the data automatically. To evaluate the performance of PRESEE, we conduct several experiments on time-series streams of different types and compare it with the state-of-art algorithm. The empirical results show that PRESEE is very efficient for real-time stream datasets by improving segmenting speed nearly ten times. The novelty of this algorithm is further demonstrated by the application of PRESEE in segmenting real-time stream datasets from ChinaFLUX sensor networks data stream.

The SME gauge sector with minimum length

NASA Astrophysics Data System (ADS)

Belich, H.; Louzada, H. L. C.

2017-12-01

We study the gauge sector of the Standard Model Extension (SME) with the Lorentz covariant deformed Heisenberg algebra associated to the minimum length. In order to find and estimate corrections, we clarify whether the violation of Lorentz symmetry and the existence of a minimum length are independent phenomena or are, in some way, related. With this goal, we analyze the dispersion relations of this theory.

The Einstein-Hilbert gravitation with minimum length

NASA Astrophysics Data System (ADS)

Louzada, H. L. C.

2018-05-01

We study the Einstein-Hilbert gravitation with the deformed Heisenberg algebra leading to the minimum length, with the intention to find and estimate the corrections in this theory, clarifying whether or not it is possible to obtain, by means of the minimum length, a theory, in D=4, which is causal, unitary and provides a massive graviton. Therefore, we will calculate and analyze the dispersion relationships of the considered theory.

5 CFR 890.1007 - Minimum length of mandatory debarments.

Code of Federal Regulations, 2011 CFR

2011-01-01

... SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Mandatory Debarments § 890.1007 Minimum length of mandatory debarments. (a...

Wind adaptive modeling of transmission lines using minimum description length

NASA Astrophysics Data System (ADS)

Jaw, Yoonseok; Sohn, Gunho

2017-03-01

The transmission lines are moving objects, which positions are dynamically affected by wind-induced conductor motion while they are acquired by airborne laser scanners. This wind effect results in a noisy distribution of laser points, which often hinders accurate representation of transmission lines and thus, leads to various types of modeling errors. This paper presents a new method for complete 3D transmission line model reconstruction in the framework of inner and across span analysis. The highlighted fact is that the proposed method is capable of indirectly estimating noise scales, which corrupts the quality of laser observations affected by different wind speeds through a linear regression analysis. In the inner span analysis, individual transmission line models of each span are evaluated based on the Minimum Description Length theory and erroneous transmission line segments are subsequently replaced by precise transmission line models with wind-adaptive noise scale estimated. In the subsequent step of across span analysis, detecting the precise start and end positions of the transmission line models, known as the Point of Attachment, is the key issue for correcting partial modeling errors, as well as refining transmission line models. Finally, the geometric and topological completion of transmission line models are achieved over the entire network. A performance evaluation was conducted over 138.5 km long corridor data. In a modest wind condition, the results demonstrates that the proposed method can improve the accuracy of non-wind-adaptive initial models on an average of 48% success rate to produce complete transmission line models in the range between 85% and 99.5% with the positional accuracy of 9.55 cm transmission line models and 28 cm Point of Attachment in the root-mean-square error.

30 CFR 18.31 - Enclosures-joints and fastenings.

Code of Federal Regulations, 2014 CFR

2014-07-01

... pressed fit shall result in a minimum interference of 0.001 inch between the parts. The minimum length of the pressed fit shall be equal to the minimum thickness requirement of paragraph (a)(6) of this.... The length of fit shall not be reduced when a push button is depressed. Operating rods shall have a...

5 CFR 890.1015 - Minimum and maximum length of permissive debarments.

Code of Federal Regulations, 2011 CFR

2011-01-01

...) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Permissive Debarments § 890.1015 Minimum and maximum length of...

16 CFR 1512.19 - Instructions and labeling.

Code of Federal Regulations, 2012 CFR

2012-01-01

... assembly and adjustment, (2) a drawing illustrating the minimum leg-length dimension of a rider and a method of measurement of this dimension. (c) The minimum leg-length dimension shall be readily...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

49 CFR 38.29 - Interior circulation, handrails and stanchions.

Code of Federal Regulations, 2013 CFR

2013-10-01

... length with front-door lifts or ramps, vertical stanchions immediately behind the driver shall either... of 22 feet in length, the minimum interior height along the path from the lift to the securement location shall be 68 inches. For vehicles of 22 feet in length or less, the minimum interior height from...

30 CFR 56.19021 - Minimum rope strength.

Code of Federal Regulations, 2010 CFR

2010-07-01

...=Static Load×4.0 (b) Friction drum ropes. For rope lengths less than 4,000 feet: Minimum Value=Static Load×(7.0-0.0005L) For rope lengths 4,000 feet or greater: Minimum Value=Static Load×5.0 (c) Tail ropes....19021 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL...

30 CFR 57.19021 - Minimum rope strength.

Code of Federal Regulations, 2011 CFR

2011-07-01

...=Static Load×4.0. (b) Friction drum ropes. For rope lengths less than 4,000 feet: Minimum Value=Static Load×(7.0−0.0005L) For rope lengths 4,000 feet or greater: Minimum Value=Static Load×5.0. (c) Tail....19021 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL...

30 CFR 57.19021 - Minimum rope strength.

Code of Federal Regulations, 2010 CFR

2010-07-01

...=Static Load×4.0. (b) Friction drum ropes. For rope lengths less than 4,000 feet: Minimum Value=Static Load×(7.0−0.0005L) For rope lengths 4,000 feet or greater: Minimum Value=Static Load×5.0. (c) Tail....19021 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL...

30 CFR 56.19021 - Minimum rope strength.

Code of Federal Regulations, 2011 CFR

2011-07-01

...=Static Load×4.0 (b) Friction drum ropes. For rope lengths less than 4,000 feet: Minimum Value=Static Load×(7.0-0.0005L) For rope lengths 4,000 feet or greater: Minimum Value=Static Load×5.0 (c) Tail ropes....19021 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL...

Eddington's theory of gravity and its progeny.

PubMed

Bañados, Máximo; Ferreira, Pedro G

2010-07-02

We resurrect Eddington's proposal for the gravitational action in the presence of a cosmological constant and extend it to include matter fields. We show that the Newton-Poisson equation is modified in the presence of sources and that charged black holes show great similarities with those arising in Born-Infeld electrodynamics coupled to gravity. When we consider homogeneous and isotropic space-times, we find that there is a minimum length (and maximum density) at early times, clearly pointing to an alternative theory of the big bang. We thus argue that the modern formulation of Eddington's theory, Born-Infeld gravity, presents us with a novel, nonsingular description of the Universe.

Online clustering algorithms for radar emitter classification.

PubMed

Liu, Jun; Lee, Jim P Y; Senior; Li, Lingjie; Luo, Zhi-Quan; Wong, K Max

2005-08-01

Radar emitter classification is a special application of data clustering for classifying unknown radar emitters from received radar pulse samples. The main challenges of this task are the high dimensionality of radar pulse samples, small sample group size, and closely located radar pulse clusters. In this paper, two new online clustering algorithms are developed for radar emitter classification: One is model-based using the Minimum Description Length (MDL) criterion and the other is based on competitive learning. Computational complexity is analyzed for each algorithm and then compared. Simulation results show the superior performance of the model-based algorithm over competitive learning in terms of better classification accuracy, flexibility, and stability.

How Does Definition of Minimum Break Length Affect Objective Measures of Sitting Outcomes Among Office Workers?

PubMed

Kloster, Stine; Danquah, Ida Høgstedt; Holtermann, Andreas; Aadahl, Mette; Tolstrup, Janne Schurmann

2017-01-01

Harmful health effects associated with sedentary behavior may be attenuated by breaking up long periods of sitting by standing or walking. However, studies assess interruptions in sitting time differently, making comparisons between studies difficult. It has not previously been described how the definition of minimum break duration affects sitting outcomes. Therefore, the aim was to address how definitions of break length affect total sitting time, number of sit-to-stand transitions, prolonged sitting periods and time accumulated in prolonged sitting periods among office workers. Data were collected from 317 office workers. Thigh position was assessed with an ActiGraph GT3X+ fixed on the right thigh. Data were exported with varying bout length of breaks. Afterward, sitting outcomes were calculated for the respective break lengths. Absolute numbers of sit-to-stand transitions decreased, and number of prolonged sitting periods and total time accumulated in prolonged sitting periods increased, with increasing minimum break length. Total sitting time was not influenced by varying break length. The definition of minimum break length influenced the sitting outcomes with the exception of total sitting time. A standard definition of break length is needed for comparison and interpretation of studies in the evolving research field of sedentary behavior.

30 CFR 77.1431 - Minimum rope strength.

Code of Federal Regulations, 2011 CFR

2011-07-01

...=Static Load×4.0 (b) Friction drum ropes. For rope lengths less than 4,000 feet: Minimum Value=Static Load×(7.0−0.0005L) For rope lengths 4,000 feet or greater: Minimum Value=Static Load×5.0 (c) Tail ropes... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH...

30 CFR 77.1431 - Minimum rope strength.

Code of Federal Regulations, 2010 CFR

2010-07-01

...=Static Load×4.0 (b) Friction drum ropes. For rope lengths less than 4,000 feet: Minimum Value=Static Load×(7.0−0.0005L) For rope lengths 4,000 feet or greater: Minimum Value=Static Load×5.0 (c) Tail ropes... Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH...

De novo characterisation of the greenlip abalone transcriptome (Haliotis laevigata) with a focus on the heat shock protein 70 (HSP70) family.

PubMed

Shiel, Brett P; Hall, Nathan E; Cooke, Ira R; Robinson, Nicholas A; Strugnell, Jan M

2015-02-01

Abalone (Haliotis) are economically important molluscs for fisheries and aquaculture industries worldwide. Despite this, genomic resources for abalone and molluscs are still limited. Here we present a description and functional annotation of the greenlip abalone (Haliotis laevigata) transcriptome. We present a focused analysis on the heat shock protein 70 (HSP70) family of genes with putative functions affecting temperature stress and immunity. A total of ~38 million paired end Illumina reads were obtained, resulting in a Trinity assembly of 222,172 contigs with minimum length of 200 base pairs and maximum length of 33 kilobases. The 20,702 contigs were annotated with gene descriptions by BLAST. We created a program to maximise the number of functionally annotated genes, and over 10,000 contigs were assigned Gene ontologies (GO terms). By using CateGOrizer, immunity related GO terms for stressors such as heat, hypoxia, oxidative stress and wounding received the highest counts. Twenty-six contigs with homology to the HSP70 family of genes were identified. Ninety-one putative single-nucleotide polymorphisms were observed in the abalone HSP70 contigs. Eleven of these were considered non-synonymous. The annotated transcriptome described in this study will be a useful basis for future work investigating the genetic response of abalone to stress.

5 CFR 890.1007 - Minimum length of mandatory debarments.

Code of Federal Regulations, 2010 CFR

2010-01-01

.... 890.1007 Section 890.1007 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Mandatory Debarments § 890.1007 Minimum length of mandatory debarments. (a...

5 CFR 890.1007 - Minimum length of mandatory debarments.

Code of Federal Regulations, 2014 CFR

2014-01-01

.... 890.1007 Section 890.1007 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Mandatory Debarments § 890.1007 Minimum length of mandatory debarments. (a...

5 CFR 890.1007 - Minimum length of mandatory debarments.

Code of Federal Regulations, 2013 CFR

2013-01-01

.... 890.1007 Section 890.1007 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Mandatory Debarments § 890.1007 Minimum length of mandatory debarments. (a...

5 CFR 890.1008 - Mandatory debarment for longer than the minimum length.

Code of Federal Regulations, 2014 CFR

2014-01-01

... minimum length. 890.1008 Section 890.1008 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Mandatory Debarments § 890.1008 Mandatory debarment for...

5 CFR 890.1015 - Minimum and maximum length of permissive debarments.

Code of Federal Regulations, 2014 CFR

2014-01-01

... debarments. 890.1015 Section 890.1015 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Permissive Debarments § 890.1015 Minimum and maximum length of...

5 CFR 890.1008 - Mandatory debarment for longer than the minimum length.

Code of Federal Regulations, 2013 CFR

2013-01-01

... minimum length. 890.1008 Section 890.1008 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Mandatory Debarments § 890.1008 Mandatory debarment for...

5 CFR 890.1015 - Minimum and maximum length of permissive debarments.

Code of Federal Regulations, 2010 CFR

2010-01-01

... debarments. 890.1015 Section 890.1015 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Permissive Debarments § 890.1015 Minimum and maximum length of...

5 CFR 890.1015 - Minimum and maximum length of permissive debarments.

Code of Federal Regulations, 2013 CFR

2013-01-01

... debarments. 890.1015 Section 890.1015 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Permissive Debarments § 890.1015 Minimum and maximum length of...

An improved method for design of expansion-chamber mufflers with application to an operational helicopter

NASA Technical Reports Server (NTRS)

Parrott, T. L.

1973-01-01

An improved method for the design of expansion-chamber mufflers is described and applied to the task of reducing exhaust noise generated by a helicopter. The method is an improvement of standard transmission-line theory in that it accounts for the effect of the mean exhaust-gas flow on the acoustic-transmission properties of a muffler system, including the termination boundary condition. The method has been computerized, and the computer program includes an optimization procedure that adjusts muffler component lengths to achieve a minimum specified desired transmission loss over a specified frequency range. A printout of the program is included together with a user-oriented description.

State Minimum Competencies for High School Graduation. Technical Note.

ERIC Educational Resources Information Center

Lawlor, Joseph

This paper contains descriptions of mandated minimum competency programs in 13 states: Connecticut, Delaware, Georgia, Hawaii, Idaho, Kansas, Missouri, New Jersey, New York, North Carolina, South Carolina, Texas, and Vermont. Each description provides the skills assessed in the state, the assessment instruments used, and the overall purposes of…

Weight compensation characteristics of Armeo®Spring exoskeleton: implications for clinical practice and research.

PubMed

Perry, Bonnie E; Evans, Emily K; Stokic, Dobrivoje S

2017-02-17

Armeo®Spring exoskeleton is widely used for upper extremity rehabilitation; however, weight compensation provided by the device appears insufficiently characterized to fully utilize it in clinical and research settings. Weight compensation was quantified by measuring static force in the sagittal plane with a load cell attached to the elbow joint of Armeo®Spring. All upper spring settings were examined in 5° increments at the minimum, maximum, and two intermediate upper and lower module length settings, while keeping the lower spring at minimum. The same measurements were made for minimum upper spring setting and maximum lower spring setting at minimum and maximum module lengths. Weight compensation was plotted against upper module angles, and slope was analyzed for each condition. The Armeo®Spring design prompted defining the slack angle and exoskeleton balance angle, which, depending on spring and length settings, divide the operating range into different unloading and loading regions. Higher spring tensions and shorter module lengths provided greater unloading (≤6.32 kg of support). Weight compensation slope decreased faster with shorter length settings (minimum length = -0.082 ± 0.002 kg/°; maximum length = -0.046 ± 0.001 kg/°) independent of spring settings. Understanding the impact of different settings on the Armeo®Spring weight compensation should help define best clinical practice and improve fidelity of research.

Apollo 12 photography 70 mm, 16 mm, and 35 mm frame index

NASA Technical Reports Server (NTRS)

1970-01-01

For each 70-mm frame, the index presents information on: (1) the focal length of the camera, (2) the photo scale at the principal point of the frame, (3) the selenographic coordinates at the principal point of the frame, (4) the percentage of forward overlap of the frame, (5) the sun angle (medium, low, high), (6) the quality of the photography, (7) the approximate tilt (minimum and maximum) of the camera, and (8) the direction of tilt. A brief description of each frame is also included. The index to the 16-mm sequence photography includes information concerning the approximate surface coverage of the photographic sequence and a brief description of the principal features shown. A column of remarks is included to indicate: (1) if the sequence is plotted on the photographic index map and (2) the quality of the photography. The pictures taken using the lunar surface closeup stereoscopic camera (35 mm) are also described in this same index format.

Adaptive partially hidden Markov models with application to bilevel image coding.

PubMed

Forchhammer, S; Rasmussen, T S

1999-01-01

Partially hidden Markov models (PHMMs) have previously been introduced. The transition and emission/output probabilities from hidden states, as known from the HMMs, are conditioned on the past. This way, the HMM may be applied to images introducing the dependencies of the second dimension by conditioning. In this paper, the PHMM is extended to multiple sequences with a multiple token version and adaptive versions of PHMM coding are presented. The different versions of the PHMM are applied to lossless bilevel image coding. To reduce and optimize the model cost and size, the contexts are organized in trees and effective quantization of the parameters is introduced. The new coding methods achieve results that are better than the JBIG standard on selected test images, although at the cost of increased complexity. By the minimum description length principle, the methods presented for optimizing the code length may apply as guidance for training (P)HMMs for, e.g., segmentation or recognition purposes. Thereby, the PHMM models provide a new approach to image modeling.

How to obtain a shortest mode converter based on periodic waveguide with limited index contrast?

NASA Astrophysics Data System (ADS)

Zhang, Lingxuan; Zhang, Wenfu; Wang, Guoxi; Hu, Yaowei; Ge, Zhiqiang; Wang, Leiran; Sun, Qibing; Wang, Weiqiang; Gong, Yongkang; Zhao, Wei

2017-05-01

Mode converter is one of most significant elements in photonic integrated circuits. It relies on increasing index contrast to shorten its length. However, index contrast is limited for technology. In addition, an overlarge index contrast leads to some disadvantages, such as large scattering loss, reflection loss, and small tolerance for manufacturing. Thus, an approximate scheme to design a mode converter is manipulating the transverse distribution of index to achieve the minimum length when the index contrast is given. We have analytically deduced the theoretical maximum coupled efficiency in periodic waveguide, which determines the minimum coupling length of mode converter. What is more, we have demonstrated how to construct a distribution function of indices in a cross section of waveguide to achieve the minimum length and a case is also given to illustrate the process. Proofs, based on both mathematic derivation and numerical simulation, have been exhibited in the paper.

Steiner trees and spanning trees in six-pin soap films

NASA Astrophysics Data System (ADS)

Dutta, Prasun; Khastgir, S. Pratik; Roy, Anushree

2010-02-01

The problem of finding minimum (local as well as absolute) path lengths joining given points (or terminals) on a plane is known as the Steiner problem. The Steiner problem arises in finding the minimum total road length joining several towns and cities. We study the Steiner tree problem using six-pin soap films. Experimentally, we observe spanning trees as well as Steiner trees partly by varying the pin diameter. We propose a possibly exact expression for the length of a spanning tree or a Steiner tree, which fails mysteriously in certain cases.

Coupling between absorption and scattering in disordered colloids

NASA Astrophysics Data System (ADS)

Stephenson, Anna; Hwang, Victoria; Park, Jin-Gyu; Manoharan, Vinothan N.

We aim to understand how scattering and absorption are coupled in disordered colloidal suspensions containing absorbing molecules (dyes). When the absorption length is shorter than the transport length, absorption dominates, and absorption and scattering can be seen as two additive effects. However, when the transport length is shorter than the absorption length, the scattering and absorption become coupled, as multiple scattering increases the path length of the light in the sample, leading to a higher probability of absorption. To quantify this synergistic effect, we measure the diffuse reflectance spectra of colloidal samples of varying dye concentrations, thicknesses, and particle concentrations, and we calculate the transport length and absorption length from our measurements, using a radiative transfer model. At particle concentrations so high that the particles form disordered packings, we find a minimum in the transport length. We show that selecting a dye where the absorption peak matches the location of the minimum in the transport length allows for enhanced absorption. Kraft-Heinz Corporation, NSF GRFP 2015200426.

76 FR 30243 - Minimum Security Devices and Procedures

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-24

... DEPARTMENT OF THE TREASURY Office of Thrift Supervision Minimum Security Devices and Procedures.... Title of Proposal: Minimum Security Devices and Procedures. OMB Number: 1550-0062. Form Number: N/A. Description: The requirement that savings associations establish a written security program is necessitated by...

50 CFR 648.147 - Black sea bass minimum fish sizes.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 50 Wildlife and Fisheries 12 2014-10-01 2014-10-01 false Black sea bass minimum fish sizes. 648... Measures for the Black Sea Bass Fishery § 648.147 Black sea bass minimum fish sizes. (a) Moratorium (commercially) permitted vessels. The minimum size for black sea bass is 11 inches (27.94 cm) total length for...

50 CFR 648.147 - Black sea bass minimum fish sizes.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 50 Wildlife and Fisheries 12 2012-10-01 2012-10-01 false Black sea bass minimum fish sizes. 648... Measures for the Black Sea Bass Fishery § 648.147 Black sea bass minimum fish sizes. (a) Moratorium (commercially) permitted vessels. The minimum size for black sea bass is 11 inches (27.94 cm) total length for...

50 CFR 648.147 - Black sea bass minimum fish sizes.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false Black sea bass minimum fish sizes. 648... Measures for the Black Sea Bass Fishery § 648.147 Black sea bass minimum fish sizes. (a) Moratorium (commercially) permitted vessels. The minimum size for black sea bass is 11 inches (27.94 cm) total length for...

Sequential Modelling of Building Rooftops by Integrating Airborne LIDAR Data and Optical Imagery: Preliminary Results

NASA Astrophysics Data System (ADS)

Sohn, G.; Jung, J.; Jwa, Y.; Armenakis, C.

2013-05-01

This paper presents a sequential rooftop modelling method to refine initial rooftop models derived from airborne LiDAR data by integrating it with linear cues retrieved from single imagery. A cue integration between two datasets is facilitated by creating new topological features connecting between the initial model and image lines, with which new model hypotheses (variances to the initial model) are produced. We adopt Minimum Description Length (MDL) principle for competing the model candidates and selecting the optimal model by considering the balanced trade-off between the model closeness and the model complexity. Our preliminary results, combined with the Vaihingen data provided by ISPRS WGIII/4 demonstrate the image-driven modelling cues can compensate the limitations posed by LiDAR data in rooftop modelling.

The atomic geometries of GaP(110) and ZnS(110) revisited - A structural ambiguity and its resolution

NASA Technical Reports Server (NTRS)

Duke, C. B.; Paton, A.; Kahn, A.

1984-01-01

The atomic geometries of GaP(110) and ZnS(110) are reexamined using the R-factor minimization procedure, developed for GaAs(110) and previously applied to GaSb(110), ZnTe(110), InAs(110), and AlP(110), to analyze experimental elastic low-energy electron diffraction intensities. Unlike most of the earlier cases, both GaP(110) and ZnS(110) exhibit two distinct minimum-Rx structures which cannot be distinguished by analysis of the shapes of the intensity profiles alone. One region of best-fit structures exhibits top-layer displacements normal to the surface characterized by a small bond-length-conserving, top-layer rotation (omega aproximately 2-3 deg), a small relaxation of the top layer away from the surface, and a 10 percent expansion of the top-layer bond length. The other region of best-fit structures is the conventional one: nearly bond-length-conserving rotations of omega = 26-28 deg in the top layer and a small (approximately 0.1 A) contraction of the uppermost layer spacing. This ambiguity may be removed, however, by consideration of the integrated beam intensities. The conventional region of structural parameters provides a decisively better description of the relative magnitudes of the integrated beam intensities and hence is the preferred structure.

Phonon wave interference in graphene and boron nitride superlattice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Xue-Kun; Zhou, Wu-Xing; Tang, Li-Ming

2016-07-11

The thermal transport properties of the graphene and boron nitride superlattice (CBNSL) are investigated via nonequilibrium molecular dynamics simulations. The simulation results show that a minimum lattice thermal conductivity can be achieved by changing the period length of the superlattice. Additionally, it is found that the period length at the minimum shifts to lower values at higher temperatures, and that the depth of the minimum increases with decreasing temperature. In particular, at 200 K, the thermal conductivities of CBNSLs with certain specific period lengths are nearly equal to the corresponding values at 300 K. A detailed analysis of the phonon spectra showsmore » that this anomalous thermal conductivity behavior is a result of strong phonon wave interference. These observations indicate a promising strategy for manipulation of thermal transport in superlattices.« less

Daily Temperature and Precipitation Data for 223 Former-USSR Stations (NDP-040)

DOE Data Explorer

Razuvaev, V. N. [Russian Research Institute of Hydrometeorological Information-World Data Centre; Apasova, E. B. [Russian Research Institute of Hydrometeorological Information-World Data Centre; Martuganov, R. A. [Russian Research Institute of Hydrometeorological Information-World Data Centre

1990-01-01

The stations in this dataset are considered by RIHMI to comprise one of the best networks suitable for temperature and precipitation monitoring over the the former-USSR. Factors involved in choosing these 223 stations included length or record, amount of missing data, and achieving reasonably good geographic coverage. There are indeed many more stations with daily data over this part of the world, and hundreds more station records are available through NOAA's Global Historical Climatology Network - Daily (GHCND) database. The 223 stations comprising this database are included in GHCND, but different data processing, updating, and quality assurance methods/checks mean that the agreement between records will vary depending on the station. The relative quality and accuracy of the common station records in the two databases also cannot be easily assessed. As of this writing, most of the common stations contained in the GHCND have more recent records, but not necessarily records starting as early as the records available here. This database contains four variables: daily mean, minimum, and maximum temperature, and daily total precipitation (liquid equivalent). Temperature were taken three times a day from 1881-1935, four times a day from 1936-65, and eight times a day since 1966. Daily mean temperature is defined as the average of all observations for each calendar day. Daily maximum/minimum temperatures are derived from maximum/minimum thermometer measurements. See the measurement description file for further details. Daily precipitation totals are also available (to the nearest tenth of a millimeter) for each station. Throughout the record, daily precipitation is defined as the total amount of precipitation recorded during a 24-h period, snowfall being converted to a liquid total by melting the snow in the gauge. From 1936 on, rain gauges were checked several times each day; the cumulative total of all observations during a calendar day was presumably used as the daily total. Again, see the measurement description file for further details.

47 CFR 74.644 - Minimum path lengths for fixed links.

Code of Federal Regulations, 2013 CFR

2013-10-01

... fixed link must equal or exceed the value set forth in the table below or the EIRP must be reduced in...,990-7,125 17 12,200-13,250 5 Above 17,700 n/a (b) For paths shorter than those specified in the Table... = Maximum EIRP as set forth in the Table in § 74.636 of this part. A = Minimum path length from the Table...

47 CFR 74.644 - Minimum path lengths for fixed links.

Code of Federal Regulations, 2010 CFR

2010-10-01

... fixed link must equal or exceed the value set forth in the table below or the EIRP must be reduced in...,990-7,125 17 12,200-13,250 5 Above 17,700 n/a (b) For paths shorter than those specified in the Table... = Maximum EIRP as set forth in the Table in § 74.636 of this part. A = Minimum path length from the Table...

47 CFR 74.644 - Minimum path lengths for fixed links.

Code of Federal Regulations, 2012 CFR

2012-10-01

... fixed link must equal or exceed the value set forth in the table below or the EIRP must be reduced in...,990-7,125 17 12,200-13,250 5 Above 17,700 n/a (b) For paths shorter than those specified in the Table... = Maximum EIRP as set forth in the Table in § 74.636 of this part. A = Minimum path length from the Table...

47 CFR 74.644 - Minimum path lengths for fixed links.

Code of Federal Regulations, 2014 CFR

2014-10-01

... fixed link must equal or exceed the value set forth in the table below or the EIRP must be reduced in...,990-7,125 17 12,200-13,250 5 Above 17,700 n/a (b) For paths shorter than those specified in the Table... = Maximum EIRP as set forth in the Table in § 74.636 of this part. A = Minimum path length from the Table...

47 CFR 74.644 - Minimum path lengths for fixed links.

Code of Federal Regulations, 2011 CFR

2011-10-01

... fixed link must equal or exceed the value set forth in the table below or the EIRP must be reduced in...,990-7,125 17 12,200-13,250 5 Above 17,700 n/a (b) For paths shorter than those specified in the Table... = Maximum EIRP as set forth in the Table in § 74.636 of this part. A = Minimum path length from the Table...

Minimum length from quantum mechanics and classical general relativity.

PubMed

Calmet, Xavier; Graesser, Michael; Hsu, Stephen D H

2004-11-19

We derive fundamental limits on measurements of position, arising from quantum mechanics and classical general relativity. First, we show that any primitive probe or target used in an experiment must be larger than the Planck length lP. This suggests a Planck-size minimum ball of uncertainty in any measurement. Next, we study interferometers (such as LIGO) whose precision is much finer than the size of any individual components and hence are not obviously limited by the minimum ball. Nevertheless, we deduce a fundamental limit on their accuracy of order lP. Our results imply a device independent limit on possible position measurements.

Influence of the optical fiber type on the performances of fiber-optics current sensor dedicated to plasma current measurement in ITER.

PubMed

Aerssens, Matthieu; Descamps, Frédéric; Gusarov, Andrei; Mégret, Patrice; Moreau, Philippe; Wuilpart, Marc

2015-07-01

In this paper, we compare, by means of simulations using the Jones formalism, the performances of several optical fiber types (low birefringence and spun fibers) for the measurement of plasma current in international thermonuclear experimental reactor (ITER). The main results presented in this paper concern the minimum value of the ratio between the beat length and the spun period, which allows meeting the ITER current measurement specifications. Assuming a high-birefringence spun fiber with a beat length of 3 mm, we demonstrate that the minimum ratio between the beat length and the spun period is 4.4 when considering a 28 m long sensing fiber surrounding the vacuum vessel. This minimum ratio rises to 10.14 when a 100 m long lead fiber connecting the interrogating system to the sensing fiber is taken into account.

75 FR 68814 - Notice of Submission of Proposed Information Collection to OMB Minimum Property Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-09

... Proposed Information Collection to OMB Minimum Property Standards for Multifamily and Care-Type Occupancy... Lists the Following Information Title of Proposal: Minimum Property Standards for Multifamily and Care-Type Occupancy Housing. OMB Approval Number: 2502-0321. Form Numbers: None. Description of the Need for...

50 CFR 648.83 - Multispecies minimum fish sizes.

Code of Federal Regulations, 2012 CFR

2012-10-01

... vessels are subject to the following minimum fish sizes, determined by total length (TL): Minimum Fish Sizes (TL) for Commercial Vessels Species Size(inches) Cod 22 (55.9 cm) Haddock 18 (45.7 cm) Pollock 19 (48.3 cm) Witch flounder (gray sole) 14 (35.6 cm) Yellowtail flounder 13 (33.0 cm) American plaice...

50 CFR 648.83 - Multispecies minimum fish sizes.

Code of Federal Regulations, 2013 CFR

2013-10-01

... vessels are subject to the following minimum fish sizes, determined by total length (TL): Minimum Fish Sizes (TL) for Commercial Vessels Species Size(inches) Cod 19 (48.3 cm) Haddock 16 (40.6 cm) Pollock 19 (48.3 cm) Witch flounder (gray sole) 13 (33 cm) Yellowtail flounder 12 (30.5 cm) American plaice (dab...

50 CFR 648.83 - Multispecies minimum fish sizes.

Code of Federal Regulations, 2014 CFR

2014-10-01

... vessels are subject to the following minimum fish sizes, determined by total length (TL): Minimum Fish Sizes (TL) for Commercial Vessels Species Size(inches) Cod 19 (48.3 cm) Haddock 16 (40.6 cm) Pollock 19 (48.3 cm) Witch flounder (gray sole) 13 (33 cm) Yellowtail flounder 12 (30.5 cm) American plaice (dab...

50 CFR 648.83 - Multispecies minimum fish sizes.

Code of Federal Regulations, 2011 CFR

2011-10-01

... vessels are subject to the following minimum fish sizes, determined by total length (TL): Minimum Fish Sizes (TL) for Commercial Vessels Species Size(inches) Cod 22 (55.9 cm) Haddock 18 (45.7 cm) Pollock 19 (48.3 cm) Witch flounder (gray sole) 14 (35.6 cm) Yellowtail flounder 13 (33.0 cm) American plaice...

Minimal Polynomial Method for Estimating Parameters of Signals Received by an Antenna Array

NASA Astrophysics Data System (ADS)

Ermolaev, V. T.; Flaksman, A. G.; Elokhin, A. V.; Kuptsov, V. V.

2018-01-01

The effectiveness of the projection minimal polynomial method for solving the problem of determining the number of sources of signals acting on an antenna array (AA) with an arbitrary configuration and their angular directions has been studied. The method proposes estimating the degree of the minimal polynomial of the correlation matrix (CM) of the input process in the AA on the basis of a statistically validated root-mean-square criterion. Special attention is paid to the case of the ultrashort sample of the input process when the number of samples is considerably smaller than the number of AA elements, which is important for multielement AAs. It is shown that the proposed method is more effective in this case than methods based on the AIC (Akaike's Information Criterion) or minimum description length (MDL) criterion.

Classification of Kiwifruit Grades Based on Fruit Shape Using a Single Camera

PubMed Central

Fu, Longsheng; Sun, Shipeng; Li, Rui; Wang, Shaojin

2016-01-01

This study aims to demonstrate the feasibility for classifying kiwifruit into shape grades by adding a single camera to current Chinese sorting lines equipped with weight sensors. Image processing methods are employed to calculate fruit length, maximum diameter of the equatorial section, and projected area. A stepwise multiple linear regression method is applied to select significant variables for predicting minimum diameter of the equatorial section and volume and to establish corresponding estimation models. Results show that length, maximum diameter of the equatorial section and weight are selected to predict the minimum diameter of the equatorial section, with the coefficient of determination of only 0.82 when compared to manual measurements. Weight and length are then selected to estimate the volume, which is in good agreement with the measured one with the coefficient of determination of 0.98. Fruit classification based on the estimated minimum diameter of the equatorial section achieves a low success rate of 84.6%, which is significantly improved using a linear combination of the length/maximum diameter of the equatorial section and projected area/length ratios, reaching 98.3%. Thus, it is possible for Chinese kiwifruit sorting lines to reach international standards of grading kiwifruit on fruit shape classification by adding a single camera. PMID:27376292

Reliability and accuracy of three imaging software packages used for 3D analysis of the upper airway on cone beam computed tomography images.

PubMed

Chen, Hui; van Eijnatten, Maureen; Wolff, Jan; de Lange, Jan; van der Stelt, Paul F; Lobbezoo, Frank; Aarab, Ghizlane

2017-08-01

The aim of this study was to assess the reliability and accuracy of three different imaging software packages for three-dimensional analysis of the upper airway using CBCT images. To assess the reliability of the software packages, 15 NewTom 5G ® (QR Systems, Verona, Italy) CBCT data sets were randomly and retrospectively selected. Two observers measured the volume, minimum cross-sectional area and the length of the upper airway using Amira ® (Visage Imaging Inc., Carlsbad, CA), 3Diagnosys ® (3diemme, Cantu, Italy) and OnDemand3D ® (CyberMed, Seoul, Republic of Korea) software packages. The intra- and inter-observer reliability of the upper airway measurements were determined using intraclass correlation coefficients and Bland & Altman agreement tests. To assess the accuracy of the software packages, one NewTom 5G ® CBCT data set was used to print a three-dimensional anthropomorphic phantom with known dimensions to be used as the "gold standard". This phantom was subsequently scanned using a NewTom 5G ® scanner. Based on the CBCT data set of the phantom, one observer measured the volume, minimum cross-sectional area, and length of the upper airway using Amira ® , 3Diagnosys ® , and OnDemand3D ® , and compared these measurements with the gold standard. The intra- and inter-observer reliability of the measurements of the upper airway using the different software packages were excellent (intraclass correlation coefficient ≥0.75). There was excellent agreement between all three software packages in volume, minimum cross-sectional area and length measurements. All software packages underestimated the upper airway volume by -8.8% to -12.3%, the minimum cross-sectional area by -6.2% to -14.6%, and the length by -1.6% to -2.9%. All three software packages offered reliable volume, minimum cross-sectional area and length measurements of the upper airway. The length measurements of the upper airway were the most accurate results in all software packages. All software packages underestimated the upper airway dimensions of the anthropomorphic phantom.

30 CFR 780.22 - Geologic information.

Code of Federal Regulations, 2010 CFR

2010-07-01

...) Geologic information shall include, at a minimum the following: (1) A description of the geology of the... adversely impacted by mining. The description shall include the areal and structural geology of the permit...

30 CFR 780.22 - Geologic information.

Code of Federal Regulations, 2013 CFR

2013-07-01

...) Geologic information shall include, at a minimum the following: (1) A description of the geology of the... adversely impacted by mining. The description shall include the areal and structural geology of the permit...

On the Trend of the Annual Mean, Maximum, and Minimum Temperature and the Diurnal Temperature Range in the Armagh Observatory, Northern Ireland, Dataset, 1844 -2012

NASA Technical Reports Server (NTRS)

Wilson, Robert M.

2013-01-01

Examined are the annual averages, 10-year moving averages, decadal averages, and sunspot cycle (SC) length averages of the mean, maximum, and minimum surface air temperatures and the diurnal temperature range (DTR) for the Armagh Observatory, Northern Ireland, during the interval 1844-2012. Strong upward trends are apparent in the Armagh surface-air temperatures (ASAT), while a strong downward trend is apparent in the DTR, especially when the ASAT data are averaged by decade or over individual SC lengths. The long-term decrease in the decadaland SC-averaged annual DTR occurs because the annual minimum temperatures have risen more quickly than the annual maximum temperatures. Estimates are given for the Armagh annual mean, maximum, and minimum temperatures and the DTR for the current decade (2010-2019) and SC24.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Q. G.; Chen, N.; Zhang, M.

Five IDs will be built for the Shanghai Synchrotron Radiation Facility (SSRF). Two identical mini-gap undulators with the period length 25mm and the minimum gap 6mm will use the in-vacuum technology and can operate in tapered mode. Two wigglers with the period lengths 7.9cm and 14cm and the same minimum gap 14mm will produce the peak fields of 1.2T and 1.94T. A variable polarization undulator of the APPLE-II type with 4.2m long and the period length 10cm can provide linearly, circularly and elliptically polarized radiation in a wide spectral range. This paper describes the magnet designs and the mechanical structuremore » designs of these IDs.« less

Safety culture in the operating room of a public hospital in the perception of healthcare professionals1

PubMed Central

Carvalho, Paloma Aparecida; Göttems, Leila Bernarda Donato; Pires, Maria Raquel Gomes Maia; de Oliveira, Maria Liz Cunha

2015-01-01

Objective: to evaluate the perception of healthcare professionals about the safety culture in the operating room of a public hospital, large-sized, according to the domains of the Safety Attitudes Questionnaire (SAQ). Method: descriptive, cross-sectional and quantitative research, with the application of the SAQ to 226 professionals. Descriptive data analysis, instrument consistency and exploratory factor analysis. Results: participants were distributed homogeneously between females (49.6%) and males (50.4%); mean age of 39.6 (SD±9.9) years and length of professional experience of 9.9 (SD±9.2) years. And Cronbach's ( of 0.84. It was identified six domains proposed in the questionnaire: stress perception (74.5) and job satisfaction (70.7) showed satisfactory results; teamwork environment (59.1) and climate of security (48.9) presented scores below the minimum recommended (75); unit's management perceptions (44.5), hospital management perceptions (34.9) and working conditions (41.9) presented the lowest averages. Conclusions: the results showed that, from the perspective of the professionals, there is weakness in the values, attitudes, skills and behaviors that determine the safety culture in a healthcare organization. PMID:26625994

Minimum triplet covers of binary phylogenetic X-trees.

PubMed

Huber, K T; Moulton, V; Steel, M

2017-12-01

Trees with labelled leaves and with all other vertices of degree three play an important role in systematic biology and other areas of classification. A classical combinatorial result ensures that such trees can be uniquely reconstructed from the distances between the leaves (when the edges are given any strictly positive lengths). Moreover, a linear number of these pairwise distance values suffices to determine both the tree and its edge lengths. A natural set of pairs of leaves is provided by any 'triplet cover' of the tree (based on the fact that each non-leaf vertex is the median vertex of three leaves). In this paper we describe a number of new results concerning triplet covers of minimum size. In particular, we characterize such covers in terms of an associated graph being a 2-tree. Also, we show that minimum triplet covers are 'shellable' and thereby provide a set of pairs for which the inter-leaf distance values will uniquely determine the underlying tree and its associated branch lengths.

Impact of minimum catch size on the population viability of Strombus gigas (Mesogastropoda: Strombidae) in Quintana Roo, Mexico.

PubMed

Peel, Joanne R; Mandujano, María del Carmen

2014-12-01

The queen conch Strombus gigas represents one of the most important fishery resources of the Caribbean but heavy fishing pressure has led to the depletion of stocks throughout the region, causing the inclusion of this species into CITES Appendix II and IUCN's Red-List. In Mexico, the queen conch is managed through a minimum fishing size of 200 mm shell length and a fishing quota which usually represents 50% of the adult biomass. The objectives of this study were to determine the intrinsic population growth rate of the queen conch population of Xel-Ha, Quintana Roo, Mexico, and to assess the effects of a regulated fishing impact, simulating the extraction of 50% adult biomass on the population density. We used three different minimum size criteria to demonstrate the effects of minimum catch size on the population density and discuss biological implications. Demographic data was obtained through capture-mark-recapture sampling, collecting all animals encountered during three hours, by three divers, at four different sampling sites of the Xel-Ha inlet. The conch population was sampled each month between 2005 and 2006, and bimonthly between 2006 and 2011, tagging a total of 8,292 animals. Shell length and lip thickness were determined for each individual. The average shell length for conch with formed lip in Xel-Ha was 209.39 ± 14.18 mm and the median 210 mm. Half of the sampled conch with lip ranged between 200 mm and 219 mm shell length. Assuming that the presence of the lip is an indicator for sexual maturity, it can be concluded that many animals may form their lip at greater shell lengths than 200 mm and ought to be considered immature. Estimation of relative adult abundance and densities varied greatly depending on the criteria employed for adult classification. When using a minimum fishing size of 200 mm shell length, between 26.2% and up to 54.8% of the population qualified as adults, which represented a simulated fishing impact of almost one third of the population. When conch extraction was simulated using a classification criteria based on lip thickness, it had a much smaller impact on the population density. We concluded that the best management strategy for S. gigas is a minimum fishing size based on a lip thickness, since it has lower impact on the population density, and given that selective fishing pressure based on size may lead to the appearance of small adult individuals with reduced fecundity. Furthermore, based on the reproductive biology and the results of the simulated fishing, we suggest a minimum lip thickness of ≥ 15 mm, which ensures the protection of reproductive stages, reduces the risk of overfishing, leading to non-viable density reduction.

50 CFR 697.20 - Size, harvesting and landing requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... length. (1) The minimum carapace length for all American lobsters harvested in or from the EEZ Nearshore... length for all American lobsters landed, harvested, or possessed by vessels issued a Federal limited access American lobster permit fishing in or electing to fish in the Nearshore Management Area 1 or the...

50 CFR 697.20 - Size, harvesting and landing requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... length. (1) The minimum carapace length for all American lobsters harvested in or from the EEZ Nearshore... length for all American lobsters landed, harvested, or possessed by vessels issued a Federal limited access American lobster permit fishing in or electing to fish in the Nearshore Management Area 1 or the...

A review on setting appropriate reach length for biological assessment of boatable rivers

EPA Science Inventory

Researchers working on boatable rivers are presented with the task of selecting an appropriate stream length, or reach length, from which data will be collected. Ideally, the sampling effort applied is the minimum that will allow stated objectives to be addressed as required by a...

Effect of Afterbody Length and Keel Angle on Minimum Depth of Step for Landing Stability and on Take-Off Stability of a Flying Boat

NASA Technical Reports Server (NTRS)

Olson, Roland E; Land, Norman S

1949-01-01

Tests were made to fill partly the need for information on the effect of afterbody dimensions on the hydrodynamic stability of a flying boat in smooth water. The dimensions investigated were depth of step, angle of afterbody keel, and length of afterbody. An analysis of the data showed that as either the afterbody length or keel angle was increased an accompanying increase in depth of step was required in order to maintain adequate landing stability. The landing-tests results have been reduced to an empirical formula giving the minimum depth of step in terms of afterbody length and keel angle. This formula is compared with results from other tank tests, and the correlation is fairly good. The formula thus becomes of use in preliminary design.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reister, D.B.; Lenhart, S.M.

Recent theoretical results have completely solved the problem of determining the minimum length path for a vehicle with a minimum turning radius moving from an initial configuration to a final configuration. Time optimal paths for a constant speed vehicle are a subset of the minimum length paths. This paper uses the Pontryagin maximum principle to find time optimal paths for a constant speed vehicle. The time optimal paths consist of sequences of axes of circles and straight lines. The maximum principle introduces concepts (dual variables, bang-bang solutions, singular solutions, and transversality conditions) that provide important insight into the nature ofmore » the time optimal paths. We explore the properties of the optimal paths and present some experimental results for a mobile robot following an optimal path.« less

Prescribed Burn at Pine Bluff Arsenal

DTIC Science & Technology

2000-03-01

length (ft) backfire flame length (ft) hf rate of spread (ch/hr) bf rate of spread (ch/hr) Minimum behavior headfire flame length (ft) backfire... flame length (ft) hf rate of spread (ch/hr) bf rate of spread (ch/hr) 8. FUEL AND WEATHER PRESCRIPTION Source of weather: National Weather Service...and left the site. No spots occurred. Backfire flame lengths were 0.2-3 feet through pine needles and grass. Flanking fire flame lengths were 2-4

[Case-Mix of hospital emergencies in the Andalusian Health Service based on the 2012 Minimum Data Set. Spain].

PubMed

Goicoechea Salazar, Juan Antonio; Nieto García, María Adoración; Laguna Téllez, Antonio; Larrocha Mata, Daniel; Canto Casasola, Vicente David; Murillo Cabezas, Francisco

2013-01-01

The implementation of digital health records in emergency departments (ED) in hospitals in the Andalusian Health Service and the development of an automatic encoder for this area have allowed us to establish a Minimum Data Set for Emergencies (MDS-ED). The aim of this article is to describe the case mix of hospital EDs using various dimensions contained in the MDS-ED. 3.235.600 hospital emergency records in 2012 were classified in clinical categories from the ICD-9-CM codes generated by the automatic encoder. Operating rules to obtain response time and length of stay were defined. A descriptive analysis was carried out to obtain demographic and chronological indicators as well as hospitalization, return and death rates and response time and length of stay in the Eds. Women generated 54,26% of all occurrences and their average age (39,98 years) was higher than men's (37,61). Paediatric emergencies accounted for 21,49% of the total. The peak hours were from 10:00 to 13:00 and from 16:00 to 17:00. Patients who did not undergo observation (92,67%) remained in the ED an average of 153 minutes. Injuries and poisoning, respiratory diseases, musculoskeletal diseases and symptoms and signs generated over 50% of all visits. 79.191 cases of chest pain, 28.741 episodes of heart failure and 27.989 episodes of serious infections were identified among the most relevant disorders. The MDS-ED makes it possible to address systematically the analysis of hospital emergencies by identifying the activity developed, the case-mix attended, the response times, the time spent in ED and the quality of the care.

Medical image enhancement using resolution synthesis

NASA Astrophysics Data System (ADS)

Wong, Tak-Shing; Bouman, Charles A.; Thibault, Jean-Baptiste; Sauer, Ken D.

2011-03-01

We introduce a post-processing approach to improve the quality of CT reconstructed images. The scheme is adapted from the resolution-synthesis (RS)1 interpolation algorithm. In this approach, we consider the input image, scanned at a particular dose level, as a degraded version of a high quality image scanned at a high dose level. Image enhancement is achieved by predicting the high quality image by classification based linear regression. To improve the robustness of our scheme, we also apply the minimum description length principle to determine the optimal number of predictors to use in the scheme, and the ridge regression to regularize the design of the predictors. Experimental results show that our scheme is effective in reducing the noise in images reconstructed from filtered back projection without significant loss of image details. Alternatively, our scheme can also be applied to reduce dose while maintaining image quality at an acceptable level.

Functional feature embedded space mapping of fMRI data.

PubMed

Hu, Jin; Tian, Jie; Yang, Lei

2006-01-01

We have proposed a new method for fMRI data analysis which is called Functional Feature Embedded Space Mapping (FFESM). Our work mainly focuses on the experimental design with periodic stimuli which can be described by a number of Fourier coefficients in the frequency domain. A nonlinear dimension reduction technique Isomap is applied to the high dimensional features obtained from frequency domain of the fMRI data for the first time. Finally, the presence of activated time series is identified by the clustering method in which the information theoretic criterion of minimum description length (MDL) is used to estimate the number of clusters. The feasibility of our algorithm is demonstrated by real human experiments. Although we focus on analyzing periodic fMRI data, the approach can be extended to analyze non-periodic fMRI data (event-related fMRI) by replacing the Fourier analysis with a wavelet analysis.

Human strength simulations for one and two-handed tasks in zero gravity

NASA Technical Reports Server (NTRS)

1972-01-01

A description is given of a three dimensional hand force capability model for the seated operator and a biomechanical model for analysis of symmetric sagittal plane activities. The models are used to simulate and study human strengths for one and two handed tasks in zero gravity. Specific conditions considered include: (1) one hand active, (2) both hands active but with different force directions on each, (3) body bracing situations provided by portable foot restraint when standing and lap belt when seated, (4) static or slow movement tasks with maximum length of 4 seconds and a minimum rest of 5 minutes between exertions, and (5) wide range of hand positions relative to either the feet or bisection of a line connecting the hip centers. Simulations were also made for shirt sleeved individuals and for the male population strengths with anthropometry matching that of astronauts.

From information processing to decisions: Formalizing and comparing psychologically plausible choice models.

PubMed

Heck, Daniel W; Hilbig, Benjamin E; Moshagen, Morten

2017-08-01

Decision strategies explain how people integrate multiple sources of information to make probabilistic inferences. In the past decade, increasingly sophisticated methods have been developed to determine which strategy explains decision behavior best. We extend these efforts to test psychologically more plausible models (i.e., strategies), including a new, probabilistic version of the take-the-best (TTB) heuristic that implements a rank order of error probabilities based on sequential processing. Within a coherent statistical framework, deterministic and probabilistic versions of TTB and other strategies can directly be compared using model selection by minimum description length or the Bayes factor. In an experiment with inferences from given information, only three of 104 participants were best described by the psychologically plausible, probabilistic version of TTB. Similar as in previous studies, most participants were classified as users of weighted-additive, a strategy that integrates all available information and approximates rational decisions. Copyright © 2017 Elsevier Inc. All rights reserved.

SLICER Airborne Laser Altimeter Characterization of Canopy Structure and Sub-canopy Topography for the BOREAS Northern and Southern Study Regions: Instrument and Data Product Description

NASA Technical Reports Server (NTRS)

Hall, Forrest G. (Editor); Nickeson, Jaime (Editor); Harding, D. J.; Blair, J. B.; Rabine, D. L.; Still, K. L.

2000-01-01

SLICER data were acquired in support of BOREAS at all of the TF sites in the SSA and NSA, and along transects between the study areas. Data were acquired on 5 days between 18-Jul and 30-Jul-1996. Each coverage of a tower site is typically 40 km in length, with a minimum of 3 and a maximum of 10 lines across each tower oriented in a variety of azimuths. The SLICER data were acquired simultaneously with ASAS hyperspectral, multiview angle images. The SLICER Level 3 products consist of binary files for each flight line with a data record for each laser shot composed of 13 parameters and a 600-byte waveform that is the raw record of the backscatter laser energy reflected from Earth's surface. The SLICER data are stored in a combination of ASCII and binary data files.

Correlation of soft palate length with velum obstruction and severity of obstructive sleep apnea syndrome.

PubMed

Lim, Ju-Shin; Lee, Jae Woo; Han, Chun; Kwon, Jang-Woo

2018-06-01

Our aim in this study was to analyze whether soft palate length and velum obstruction during sleep are correlated and to determine the effects of related parameters on obstructive sleep apnea syndrome (OSAS) severity. We used computed tomography to measure soft palate length and drug-induced sleep endoscopy (DISE) to evaluate velum obstruction severity. Patients also underwent polysomnography (PSG) for evaluation of OSAS severity. A retrospective cohort of 67 patients with OSAS treated between May 1st, 2013 and July 31st, 2016 was analyzed. Each patient underwent DISE, PSG, and computed tomography. Using DISE, velum obstruction was categorized by the VOTE classification method. Using computed tomography, soft palate length was measured as the length of the posterior nasal spine to the uvula. Correlations of velum obstruction in DISE and PSG parameters (obstructive apnea, hypopnea, apnea hypopnea index (AHI), respiratory effort related arousal (RERA), respiratory disturbance index (RDI), baseline SaO 2 , and minimum SaO 2 ) with soft palate length were also analyzed. Among the 67 patients, the average PNS-U length was 39.90±4.19mm. Length was significantly different by age but not by other demographic characteristics such as sex, past history, or BMI. DISE revealed a statistically significant difference of velum obstruction degree; the cutoff value for PNS-U was 39.47mm. The PSG results, obstructive apnea, AHI, RDI, baseline SaO 2 , and minimum SaO 2 were correlated with PNS-U length, while other results such as hypopnea and RERA showed no correlation. Analysis of soft palate length showed that increased PNS-U length was associated with higher rates of obstructive apnea, AHI, and RDI as assessed by PSG. In contrast, lower baseline SaO 2 and minimum SaO 2 values were seen by PSG; more severe velum obstruction was seen by DISE. We propose that when a soft palate is suspected in OSAS, computed tomography measurement of soft palate length is a valid method for estimating the degree of velum obstruction and the severity of OSAS. Copyright © 2017 Elsevier B.V. All rights reserved.

The impact of maternity length-of-stay mandates on the labor market and insurance coverage.

PubMed

Sabik, Lindsay M; Laugesen, Miriam J

2012-01-01

To understand the effects of insurance regulation on the labor market and insurance coverage, this study uses a difference-in-difference-in-differences analysis to compare five states that passed minimum maternity length-of-stay laws with states that waited until after a federal law was passed. On average, we do not find statistically significant effects on labor market outcomes such as hours of work and wages. However, we find that employees of small firms in states with maternity length-of-stay mandates experienced a 6.2-percentage-point decline in the likelihood of having employer-sponsored insurance. Implementation of federal health reform that requires minimum benefit standards should consider the implications for firms of differing sizes.

The all-fiber cladding-pumped Yb-doped gain-switched laser.

PubMed

Larsen, C; Hansen, K P; Mattsson, K E; Bang, O

2014-01-27

Gain-switching is an alternative pulsing technique of fiber lasers, which is power scalable and has a low complexity. From a linear stability analysis of rate equations the relaxation oscillation period is derived and from it, the pulse duration is defined. Good agreement between the measured pulse duration and the theoretical prediction is found over a wide range of parameters. In particular we investigate the influence of an often present length of passive fiber in the cavity and show that it introduces a finite minimum in the achievable pulse duration. This minimum pulse duration is shown to occur at longer active fibers length with increased passive length of fiber in the cavity. The peak power is observed to depend linearly on the absorbed pump power and be independent of the passive fiber length. Given these conclusions, the pulse energy, duration, and peak power can be estimated with good precision.

Effects of cryptic mortality and the hidden costs of using length limits in fishery management

USGS Publications Warehouse

Coggins, L.G.; Catalano, M.J.; Allen, M.S.; Pine, William E.; Walters, C.J.

2007-01-01

Fishery collapses cause substantial economic and ecological harm, but common management actions often fail to prevent overfishing. Minimum length limits are perhaps the most common fishing regulation used in both commercial and recreational fisheries, but their conservation benefits can be influenced by discard mortality of fish caught and released below the legal length. We constructed a computer model to evaluate how discard mortality could influence the conservation utility of minimum length regulations. We evaluated policy performance across two disparate fish life-history types: short-lived high-productivity (SLHP) and long-lived low-productivity (LLLP) species. For the life-history types, fishing mortality rates and minimum length limits that we examined, length limits alone generally failed to achieve sustainability when discard mortality rate exceeded about 0.2 for SLHP species and 0.05 for LLLP species. At these levels of discard mortality, reductions in overall fishing mortality (e.g. lower fishing effort) were required to prevent recruitment overfishing if fishing mortality was high. Similarly, relatively low discard mortality rates (>0.05) rendered maximum yield unobtainable and caused a substantial shift in the shape of the yield response surfaces. An analysis of fishery efficiency showed that length limits caused the simulated fisheries to be much less efficient, potentially exposing the target species and ecosystem to increased negative effects of the fishing process. Our findings suggest that for overexploited fisheries with moderate-to-high discard mortality rates, reductions in fishing mortality will be required to meet management goals. Resource managers should carefully consider impacts of cryptic mortality sources (e.g. discard mortality) on fishery sustainability, especially in recreational fisheries where release rates are high and effort is increasing in many areas of the world. ?? 2007 Blackwell Publishing Ltd.

Progress in second-generation HTS wire development and manufacturing

NASA Astrophysics Data System (ADS)

Selvamanickam, V.; Chen, Y.; Xiong, X.; Xie, Y.; Zhang, X.; Rar, A.; Martchevskii, M.; Schmidt, R.; Lenseth, K.; Herrin, J.

2008-09-01

2007 has marked yet another year of continued rapid progress in developing and manufacturing high-performance, long-length second-generation (2G) HTS wires at high speeds. Using ion beam assisted deposition (IBAD) MgO and associated buffer sputtering processes, SuperPower has now exceeded piece lengths of 1000 m of fully buffered tape reproducibly with excellent in-plane texture of 6-7 degrees and uniformity of about 2%. These kilometer lengths are produced at high speeds of about 350 m/h of 4 mm wide tape. In combination with metal organic chemical vapor deposition (MOCVD), 2G wires up to single piece lengths to 790 m with a minimum critical current value of 190 A/cm corresponding to a Critical current × Length performance of 150,100 Am have been achieved. Tape speeds up to 180 m/h have been reached MOCVD while maintaining critical currents above 200 A/cm in 100+ m lengths. Thick film MOCVD technology has been transitioned to Pilot manufacturing system where a minimum critical current of 320 A/cm has been demonstrated over a length of 155 m processed at a speed of 70 m/h in 4 mm width. Finally, nearly 10,000 m of 2G wire has been produced, exhaustively tested, and delivered to the Albany Cable project. The average minimum critical current of the wire delivered in 225 segments of 43-44 m is 70 A in 4 mm widths. A 30 m cable has been fabricated with this wire by Sumitomo Electric and has been installed in the power grid of National Grid in downtown Albany and is the world’s first 2G device installed in the grid.

Time optimal paths for high speed maneuvering

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reister, D.B.; Lenhart, S.M.

1993-01-01

Recent theoretical results have completely solved the problem of determining the minimum length path for a vehicle with a minimum turning radius moving from an initial configuration to a final configuration. Time optimal paths for a constant speed vehicle are a subset of the minimum length paths. This paper uses the Pontryagin maximum principle to find time optimal paths for a constant speed vehicle. The time optimal paths consist of sequences of axes of circles and straight lines. The maximum principle introduces concepts (dual variables, bang-bang solutions, singular solutions, and transversality conditions) that provide important insight into the nature ofmore » the time optimal paths. We explore the properties of the optimal paths and present some experimental results for a mobile robot following an optimal path.« less

30 CFR 1206.151 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-07-01

... interests regarding that contract. To be considered arm's length for any production month, a contract must.... Gathering means the movement of lease production to a central accumulation and/or treatment point on the... the lessee's production and to market that production. Minimum royalty means that minimum amount of...

30 CFR 1206.151 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-07-01

... interests regarding that contract. To be considered arm's length for any production month, a contract must.... Gathering means the movement of lease production to a central accumulation and/or treatment point on the... the lessee's production and to market that production. Minimum royalty means that minimum amount of...

30 CFR 206.151 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-07-01

... interests regarding that contract. To be considered arm's length for any production month, a contract must.... Gathering means the movement of lease production to a central accumulation and/or treatment point on the... the lessee's production and to market that production. Minimum royalty means that minimum amount of...

Implications of Extended Solar Minima

NASA Technical Reports Server (NTRS)

Adams, Mitzi L.; Davis, J. M.

2009-01-01

Since the discovery of periodicity in the solar cycle, the historical record of sunspot number has been carefully examined, attempting to make predictions about the next cycle. Much emphasis has been on predicting the maximum amplitude and length of the next cycle. Because current space-based and suborbital instruments are designed to study active phenomena, there is considerable interest in estimating the length and depth of the current minimum. We have developed criteria for the definition of a minimum and applied it to the historical sunspot record starting in 1749. In doing so, we find that 1) the current minimum is not yet unusually long and 2) there is no obvious way of predicting when, using our definition, the current minimum may end. However, by grouping the data into 22- year cycles there is an interesting pattern of extended minima that recurs every fourth or fifth 22-year cycle. A preliminary comparison of this pattern with other records, suggests the possibility of a correlation between extended minima and lower levels of solar irradiance.

Study of short atmospheric pressure dc glow microdischarge in air

NASA Astrophysics Data System (ADS)

Kudryavtsev, Anatoly; Bogdanov, Eugene; Chirtsov, Alexander; Emelin, Sergey

2011-10-01

The results of experiments and simulations of short (without positive column) atmospheric pressure dc glow discharge in air are presented. We used metal steel electrodes with a gap of 5-100 microns. The experimental voltage-current characteristic's (VAC) have a constant or slightly increasing form at low gap. The most stable microdischarges were burning with a flat cathode and rounded anode, when the length of the discharge is automatically established near the minimum of the Paschen curve by changing their binding on the anode. In this case microdischarge was stable and it had growing VAC. For simulations we used 2D fluid model with kinetic description of electrons. We solved the balance equations for the vibrationally- and the electronically-excited states of a nitrogen and oxygen molecules; nitrogen and oxygen atoms; ozone molecule; and different nitrogen and oxygen ions with different plasmochemical reactions between them. Simulations predicted the main regions of the dc glow discharges including cathode and anode sheath and plasma of negative glow, Faraday dark space and transition region. Gas heating plays an important role in shaping the discharge profiles. The results of experiments and simulations of short (without positive column) atmospheric pressure dc glow discharge in air are presented. We used metal steel electrodes with a gap of 5-100 microns. The experimental voltage-current characteristic's (VAC) have a constant or slightly increasing form at low gap. The most stable microdischarges were burning with a flat cathode and rounded anode, when the length of the discharge is automatically established near the minimum of the Paschen curve by changing their binding on the anode. In this case microdischarge was stable and it had growing VAC. For simulations we used 2D fluid model with kinetic description of electrons. We solved the balance equations for the vibrationally- and the electronically-excited states of a nitrogen and oxygen molecules; nitrogen and oxygen atoms; ozone molecule; and different nitrogen and oxygen ions with different plasmochemical reactions between them. Simulations predicted the main regions of the dc glow discharges including cathode and anode sheath and plasma of negative glow, Faraday dark space and transition region. Gas heating plays an important role in shaping the discharge profiles. This work was supported by the FZP and SPbGU

On the Importance of Cycle Minimum in Sunspot Cycle Prediction

NASA Technical Reports Server (NTRS)

Wilson, Robert M.; Hathaway, David H.; Reichmann, Edwin J.

1996-01-01

The characteristics of the minima between sunspot cycles are found to provide important information for predicting the amplitude and timing of the following cycle. For example, the time of the occurrence of sunspot minimum sets the length of the previous cycle, which is correlated by the amplitude-period effect to the amplitude of the next cycle, with cycles of shorter (longer) than average length usually being followed by cycles of larger (smaller) than average size (true for 16 of 21 sunspot cycles). Likewise, the size of the minimum at cycle onset is correlated with the size of the cycle's maximum amplitude, with cycles of larger (smaller) than average size minima usually being associated with larger (smaller) than average size maxima (true for 16 of 22 sunspot cycles). Also, it was found that the size of the previous cycle's minimum and maximum relates to the size of the following cycle's minimum and maximum with an even-odd cycle number dependency. The latter effect suggests that cycle 23 will have a minimum and maximum amplitude probably larger than average in size (in particular, minimum smoothed sunspot number Rm = 12.3 +/- 7.5 and maximum smoothed sunspot number RM = 198.8 +/- 36.5, at the 95-percent level of confidence), further suggesting (by the Waldmeier effect) that it will have a faster than average rise to maximum (fast-rising cycles have ascent durations of about 41 +/- 7 months). Thus, if, as expected, onset for cycle 23 will be December 1996 +/- 3 months, based on smoothed sunspot number, then the length of cycle 22 will be about 123 +/- 3 months, inferring that it is a short-period cycle and that cycle 23 maximum amplitude probably will be larger than average in size (from the amplitude-period effect), having an RM of about 133 +/- 39 (based on the usual +/- 30 percent spread that has been seen between observed and predicted values), with maximum amplitude occurrence likely sometime between July 1999 and October 2000.

Scores on Riley's stuttering severity instrument versions three and four for samples of different length and for different types of speech material.

PubMed

Todd, Helena; Mirawdeli, Avin; Costelloe, Sarah; Cavenagh, Penny; Davis, Stephen; Howell, Peter

2014-12-01

Riley stated that the minimum speech sample length necessary to compute his stuttering severity estimates was 200 syllables. This was investigated. Procedures supplied for the assessment of readers and non-readers were examined to see whether they give equivalent scores. Recordings of spontaneous speech samples from 23 young children (aged between 2 years 8 months and 6 years 3 months) and 31 older children (aged between 10 years 0 months and 14 years 7 months) were made. Riley's severity estimates were scored on extracts of different lengths. The older children provided spontaneous and read samples, which were scored for severity according to reader and non-reader procedures. Analysis of variance supported the use of 200-syllable-long samples as the minimum necessary for obtaining severity scores. There was no significant difference in SSI-3 scores for the older children when the reader and non-reader procedures were used. Samples that are 200-syllables long are the minimum that is appropriate for obtaining stable Riley's severity scores. The procedural variants provide similar severity scores.

Correlations of catalytic combustor performance parameters

NASA Technical Reports Server (NTRS)

Bulzan, D. L.

1978-01-01

Correlations for combustion efficiency percentage drop and the minimum required adiabatic reaction temperature necessary to meet emissions goals of 13.6 g CO/kg fuel and 1.64 g HC/kg fuel are presented. Combustion efficiency was found to be a function of the cell density, cell circumference, reactor length, reference velocity, and adiabatic reaction temperature. The percentage pressure drop at an adiabatic reaction temperature of 1450 K was found to be proportional to the reference velocity to the 1.5 power and to the reactor length. It is inversely proportional to the pressure, cell hydraulic diameter, and fractional open area. The minimum required adiabatic reaction temperature was found to increase with reference velocity and decrease with cell circumference, cell density and reactor length. A catalyst factor was introduced into the correlations to account for differences between catalysts. Combustion efficiency, the percentage pressure drop, and the minimum required adiabatic reaction temperature were found to be a function of the catalyst factor. The data was from a 12 cm-diameter test rig with noble metal reactors using propane fuel at an inlet temperature of 800 K.

75 FR 59195 - Federal Acquisition Regulation; Time-and-Materials (T&M) and Labor-Hour (LH) Contracts for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-27

... suitable. At a minimum, the D&F shall-- (i) Include a description of the market research conducted (see 8... determination and findings is required to contain several elements, including a description of the market research performed for the acquisition and a description of the actions planned to maximize the use of...

ATLAS from Data Research Associates: A Fully Integrated Automation System.

ERIC Educational Resources Information Center

Mellinger, Michael J.

1987-01-01

This detailed description of a fully integrated, turnkey library system includes a complete profile of the system (functions, operational characteristics, hardware, operating system, minimum memory and pricing); history of the technologies involved; and descriptions of customer services and availability. (CLB)

Re-description of Echiniscus cavagnaroi Schuster & Grigarick, 1966 (Tardigrada: Heterotardigrada: Echiniscoidea: Echiniscidae) from type material, with new records from Hawaii and Bermuda.

PubMed

Meyer, Harry A

2016-06-13

The description of Echiniscus cavagnaroi Schuster & Grigarick, 1966 (Tardigrada: Heterotardigrada: Echiniscoidea: Echiniscidae) is emended with new morphometric measurements of the holotype and eleven paratypes. The length of Cirrus A in the holotype (25.2 μm) was only half the 50 μm reported in the original description. Moreover, the largest values for Cirrus A length and Cirrus A to body length ratio for any specimen (40.6 μm, 21%) were also lower than in the original description. Variation in the presence or absence of spines was considerably greater than originally described. Spines C, D^d and E were not present on all specimens (C present in 67%, D^d in 67%, E in 50%). The length of spines D^d and E, when present, varied greatly among specimens. The geographical range of E. cavagnaroi is expanded by new records from the Hawaiian Islands and Bermuda. The species has been reported from southern China; however, the published description of these specimens differs markedly from type specimens in several respects. The presence of E. cavagnaroi sensu stricto in China needs to be confirmed. The high variability in presence or absence and length of spines in Echiniscus cavagnaroi underscores the importance of assessing variability in these characteristics when identifying unknown specimens or describing new species in the genus. This requires using as many specimens as possible and fully reporting variability.

Proposal for Support of Miami Inner City Marine Summer Intern Program, Dade County.

DTIC Science & Technology

1987-12-21

employer NUMBER OF POSITIONS ONE MINIMUM AGE 16 SPECIAL REQUIREMENTS * General Science * Basic knowledge of library orncedures, an interest in library ... science in helpful * Minimum Grade Point Average 3.0 DRESS REQUIREMENTS Discuss with employer JOB DESCRIPTION p. * Catalogs and files new sets of

Large eddy simulations of a transcritical round jet submitted to transverse acoustic modulation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gonzalez-Flesca, M.; CNES DLA, 52 Rue Jacques Hillairet, 75612 Paris Cedex; Schmitt, T.

This article reports numerical computations of a turbulent round jet of transcritical fluid (low temperature nitrogen injected under high pressure conditions) surrounded by the same fluid at rest under supercritical conditions (high temperature and high pressure) and submitted to transverse acoustic modulations. The numerical framework relies on large eddy simulation in combination with a real-gas description of thermodynamics and transport properties. A stationary acoustic field is obtained by modulating the normal acoustic velocity at the lateral boundaries of the computational domain. This study specifically focuses on the interaction of the jet with the acoustic field to investigate how the roundmore » transcritical jet changes its shape and mixes with the surrounding fluid. Different modulation amplitudes and frequencies are used to sweep a range of conditions. When the acoustic field is established in the domain, the jet length is notably reduced and the jet is flattened in the spanwise direction. Two regimes of oscillation are identified: for low Strouhal numbers a large amplitude motion is observed, while for higher Strouhal numbers the jet oscillates with a small amplitude around the injector axis. The minimum length is obtained for a Strouhal number of 0.3 and the jet length increases with increasing Strouhal numbers after reaching this minimum value. The mechanism of spanwise deformation is shown to be linked with dynamical effects resulting from reduction of the pressure in the transverse direction in relation with increased velocities on the two sides of the jet. A propagative wave is then introduced in the domain leading to similar effects on the jet, except that a bending is also observed in the acoustic propagation direction. A kinematic model, combining hydrodynamic and acoustic contributions, is derived in a second stage to represent the motion of the jet centerline. This model captures details of the numerical simulations quite well. These various results can serve to interpret observations made on more complex flow configurations such as coaxial jets or jet flames formed by coaxial injectors.« less

Investigating Hastily-Formed Collaborative Networks

DTIC Science & Technology

2007-03-01

support a minimum range of 250 meters since this is the minimum required length of a fire hose . • Jurisdiction Area Network (JAN): This is the main...but typical braided one-half inch polypropylene rope weighs less than two pounds per one hundred 4-19 feet and has tensile strengths greater than two

46 CFR 164.023-13 - Production tests and inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Constant Rate of Traverse tensile testing machine, capable of initial clamp separation of ten inches and a... the acceptance testing values but not less than the performance minimums. (2) Length/weight values must be within 5 percent of the acceptance testing values but not less than the performance minimums...

Apparatus and method for classifying fuel pellets for nuclear reactor

DOEpatents

Wilks, Robert S.; Sternheim, Eliezer; Breakey, Gerald A.; Sturges, Jr., Robert H.; Taleff, Alexander; Castner, Raymond P.

1984-01-01

Control for the operation of a mechanical handling and gauging system for nuclear fuel pellets. The pellets are inspected for diameters, lengths, surface flaws and weights in successive stations. The control includes, a computer for commanding the operation of the system and its electronics and for storing and processing the complex data derived at the required high rate. In measuring the diameter, the computer enables the measurement of a calibration pellet, stores that calibration data and computes and stores diameter-correction factors and their addresses along a pellet. To each diameter measurement a correction factor is applied at the appropriate address. The computer commands verification that all critical parts of the system and control are set for inspection and that each pellet is positioned for inspection. During each cycle of inspection, the measurement operation proceeds normally irrespective of whether or not a pellet is present in each station. If a pellet is not positioned in a station, a measurement is recorded, but the recorded measurement indicates maloperation. In measuring diameter and length a light pattern including successive shadows of slices transverse for diameter or longitudinal for length are projected on a photodiode array. The light pattern is scanned electronically by a train of pulses. The pulses are counted during the scan of the lighted diodes. For evaluation of diameter the maximum diameter count and the number of slices for which the diameter exceeds a predetermined minimum is determined. For acceptance, the maximum must be less than a maximum level and the minimum must exceed a set number. For evaluation of length, the maximum length is determined. For acceptance, the length must be within maximum and minimum limits.

Aerodynamic Characteristics of a Flying-Boat Hull Having a Length-Beam Ratio of 15, TED No. NACA 2206

NASA Technical Reports Server (NTRS)

Riebe, John M.; Naeseth, Rodger L.

1951-01-01

An investigation was made in the Langley 300 MPH 7- by 10-foot tunnel to determine the aerodynamic characteristics of a flying-boat hull of a length-beam ratio of 15 in the presence of a wing. The investigation was an extension of previous tests made on hulls of length-beam ratios of 6, 9, and 12; these hulls were designed to have approximately the same hydrodynamic performance with respect to spray and resistance characteristics. Comparison with the previous investigation at lower length-beam ratios indicated a reduction in minimum drag coefficients of 0.0006 (10 peroent)with fixed transition when the length-beam ratio was extended from 12 to 15. As with the hulls of lower length-beam ratio, the drag reduction with a length-beam ratio of 15 occurred throughout the range of angle of attack tested and the angle of attack for minimum drag was in the range from 2deg to 3deg. Increasing the length-beam ratio from 12 to 15 reduced the hull longitudinal instability by an mount corresponding to an aerodynamic-center shift of about 1/2 percent of the mean aerodynamic chord of the hypothetical flying boat. At an angle of attack of 2deg, the value of the variation of yawing-moment coefficient with angle of yaw for a length-beam ratio of 15 was 0.00144, which was 0.00007 larger than the value for a length-beam ratio of 12.

Morphological characters and DNA barcoding of Syngnathus schlegeli in the coastal waters of China

NASA Astrophysics Data System (ADS)

Chen, Zhi; Zhang, Yan; Han, Zhiqiang; Song, Na; Gao, Tianxiang

2018-03-01

A Syngnathus species widely distributed in Chinese seas was permanently identified as Syngnathus acus by native ichthyologists, but the taxonomic description about this species was inadequate and lacking conclusively molecular evidence. To identify this species, 357 individuals of this species from the coastal waters of Dandong, Yantai, Qingdao and Zhoushan were collected and measured. Morphological results showed that these slender specimens were mainly brownish, usually mottled with pale. Standard length ranged from 117 mm to 213 mm with an average length of 180.3 mm. The above characters were consistent with S. schlegeli distributed in Japan but colored differently from and much smaller than typical S. acus reported in Europe. Thus, morphological studies revealed that this species was previously misidentified as S. acus and might be S. schlegeli in reality. In addition, a fragment of cytochrome oxidase subunit I ( COI) gene of mitochondrial DNA was also sequenced for species identification, and 15 COI sequences belonging to different Syngnathus species were also used for the molecular identification. COI sequences of our specimens had the minimum genetic distance from recognized S. schlegeli from Japan and clustered with it firstly. The phylogenetic analysis similarly suggested that the species previously identified as S. acus in the coastal waters of China was S. schlegeli actually.

Automatic discovery of optimal classes

NASA Technical Reports Server (NTRS)

Cheeseman, Peter; Stutz, John; Freeman, Don; Self, Matthew

1986-01-01

A criterion, based on Bayes' theorem, is described that defines the optimal set of classes (a classification) for a given set of examples. This criterion is transformed into an equivalent minimum message length criterion with an intuitive information interpretation. This criterion does not require that the number of classes be specified in advance, this is determined by the data. The minimum message length criterion includes the message length required to describe the classes, so there is a built in bias against adding new classes unless they lead to a reduction in the message length required to describe the data. Unfortunately, the search space of possible classifications is too large to search exhaustively, so heuristic search methods, such as simulated annealing, are applied. Tutored learning and probabilistic prediction in particular cases are an important indirect result of optimal class discovery. Extensions to the basic class induction program include the ability to combine category and real value data, hierarchical classes, independent classifications and deciding for each class which attributes are relevant.

Effects of consumption-oriented versus trophy-oriented fisheries on Muskellunge population size structure in northern Wisconsin

USGS Publications Warehouse

Faust, Matthew D.; Hansen, Michael J.

2016-01-01

To determine whether a consumption-oriented fishery was compatible with a trophy-oriented fishery for Muskellunge Esox masquinongy, we modeled effects of a spearing fishery and recreational angling fishery on population size structure (i.e., numbers of fish ≥ 102, 114, and 127 cm) in northern Wisconsin. An individual-based simulation model was used to quantify the effect of harvest mortality at currently observed levels of recreational angling and tribal spearing fishery exploitation, along with simulated increases in exploitation, for three typical growth potentials (i.e., low, moderate, and high) of Muskellunge in northern Wisconsin across a variety of minimum length limits (i.e., 71, 102, 114, and 127 cm). Populations with moderate to high growth potential and minimum length limits ≥ 114 cm were predicted to have lower declines in numbers of trophy Muskellunge when subjected to angling-only and mixed fisheries at observed and increased levels of exploitation, which suggested that fisheries with disparate motivations may be able to coexist under certain conditions such as restrictive length limits and low levels of exploitation. However, for most Muskellunge populations in northern Wisconsin regulated by a 102-cm minimum length limit, both angling and spearing fisheries may reduce numbers of trophy Muskellunge as larger declines were predicted across all growth potentials. Our results may be useful if Muskellunge management options in northern Wisconsin are re-examined in the future.

Association of Day Length and Weather Conditions with Physical Activity Levels in Older Community Dwelling People

PubMed Central

Witham, Miles D.; Donnan, Peter T.; Vadiveloo, Thenmalar; Sniehotta, Falko F.; Crombie, Iain K.; Feng, Zhiqiang; McMurdo, Marion E. T.

2014-01-01

Background Weather is a potentially important determinant of physical activity. Little work has been done examining the relationship between weather and physical activity, and potential modifiers of any relationship in older people. We therefore examined the relationship between weather and physical activity in a cohort of older community-dwelling people. Methods We analysed prospectively collected cross-sectional activity data from community-dwelling people aged 65 and over in the Physical Activity Cohort Scotland. We correlated seven day triaxial accelerometry data with daily weather data (temperature, day length, sunshine, snow, rain), and a series of potential effect modifiers were tested in mixed models: environmental variables (urban vs rural dwelling, percentage of green space), psychological variables (anxiety, depression, perceived behavioural control), social variables (number of close contacts) and health status measured using the SF-36 questionnaire. Results 547 participants, mean age 78.5 years, were included in this analysis. Higher minimum daily temperature and longer day length were associated with higher activity levels; these associations remained robust to adjustment for other significant associates of activity: age, perceived behavioural control, number of social contacts and physical function. Of the potential effect modifier variables, only urban vs rural dwelling and the SF-36 measure of social functioning enhanced the association between day length and activity; no variable modified the association between minimum temperature and activity. Conclusions In older community dwelling people, minimum temperature and day length were associated with objectively measured activity. There was little evidence for moderation of these associations through potentially modifiable health, environmental, social or psychological variables. PMID:24497925

Association of day length and weather conditions with physical activity levels in older community dwelling people.

PubMed

Witham, Miles D; Donnan, Peter T; Vadiveloo, Thenmalar; Sniehotta, Falko F; Crombie, Iain K; Feng, Zhiqiang; McMurdo, Marion E T

2014-01-01

Weather is a potentially important determinant of physical activity. Little work has been done examining the relationship between weather and physical activity, and potential modifiers of any relationship in older people. We therefore examined the relationship between weather and physical activity in a cohort of older community-dwelling people. We analysed prospectively collected cross-sectional activity data from community-dwelling people aged 65 and over in the Physical Activity Cohort Scotland. We correlated seven day triaxial accelerometry data with daily weather data (temperature, day length, sunshine, snow, rain), and a series of potential effect modifiers were tested in mixed models: environmental variables (urban vs rural dwelling, percentage of green space), psychological variables (anxiety, depression, perceived behavioural control), social variables (number of close contacts) and health status measured using the SF-36 questionnaire. 547 participants, mean age 78.5 years, were included in this analysis. Higher minimum daily temperature and longer day length were associated with higher activity levels; these associations remained robust to adjustment for other significant associates of activity: age, perceived behavioural control, number of social contacts and physical function. Of the potential effect modifier variables, only urban vs rural dwelling and the SF-36 measure of social functioning enhanced the association between day length and activity; no variable modified the association between minimum temperature and activity. In older community dwelling people, minimum temperature and day length were associated with objectively measured activity. There was little evidence for moderation of these associations through potentially modifiable health, environmental, social or psychological variables.

An Adaptive Pheromone Updation of the Ant-System using LMS Technique

NASA Astrophysics Data System (ADS)

Paul, Abhishek; Mukhopadhyay, Sumitra

2010-10-01

We propose a modified model of pheromone updation for Ant-System, entitled as Adaptive Ant System (AAS), using the properties of basic Adaptive Filters. Here, we have exploited the properties of Least Mean Square (LMS) algorithm for the pheromone updation to find out the best minimum tour for the Travelling Salesman Problem (TSP). TSP library has been used for the selection of benchmark problem and the proposed AAS determines the minimum tour length for the problems containing large number of cities. Our algorithm shows effective results and gives least tour length in most of the cases as compared to other existing approaches.

Supersonic minimum length nozzle design for dense gases

NASA Technical Reports Server (NTRS)

Aldo, Andrew C.; Argrow, Brian M.

1993-01-01

Recently, dense gases have been investigated for many engineering applications such as for turbomachinery and wind tunnels. Supersonic nozzle design for these gases is complicated by their nonclassical behavior in the transonic flow regime. In this paper a method of characteristics (MOC) is developed for two-dimensional (planar) and, primarily, axisymmetric flow of a van der Waals gas. Using a straight aortic line assumption, a centered expansion is used to generate an inviscid wall contour of minimum length. The van der Waals results are compared to previous perfect gas results to show the real gas effects on the flow properties and inviscid wall contours.

Biology of larval sea lampreys (Petromyzon marinus) of the 1960 year class, isolated in the Big Garlic River, Michigan, 1960-65

USGS Publications Warehouse

Manion, Patrick J.; McLain, Alberton L.

1971-01-01

The capture of four recently metamorphosed sea lampreys (two males and two females), 152-172 mm long, in the fall of 1965, established the minimum age at transformation for larvae in the Big Garlic River at 5 years. Age and length (with the exception of a possible minimum length) were determined not to be critical factors in metamorphosis. The presence of larvae 65-176 mm long (mean, 107 mm) in the river in 1965 indicated that metamorphosis of lampreys in a single year class takes place over a period of years.

Analysis of the electron-beam-induced current of a polycrystalline p-n junction when the diffusion lengths of the material on either side of a grain boundary differ

NASA Technical Reports Server (NTRS)

Von Roos, O.; Luke, K. L.

1984-01-01

The short circuit current generated by the electron beam of a scanning electron microscope in p-n junctions is reduced by enhanced recombination at grain boundaries in polycrystalline material. Frequently, grain boundaries separate the semiconductor into regions possessing different minority carrier life times. This markedly affects the short circuit current I(sc) as a function of scanning distance from the grain boundary. It will be shown theoretically that (1) the minimum of the I(sc) in crossing the grain boundary with the scanning electron beam is shifted away from the grain boundary toward the region with smaller life time (shorter diffusion length), (2) the magnitude of the minimum differs markedly from those calculated under the assumption of equal diffusion lengths on either side of the grain boundary, and (3) the minimum disappears altogether for small surface recombination velocities (s less than 10,000 cm/s). These effects become negligible, however, for large recombination velocities s at grain boundaries. For p-type silicon this happens for s not less than 100,000 cm/s.

State Competencies for Writing: Grades K-6. Technical Note.

ERIC Educational Resources Information Center

Lawlor, Joseph

This paper contains descriptions of mandated minimum competency documents from seven states: Florida, Georgia, Louisiana, Michigan, Oklahoma, Tennessee, and Texas. Each description provides a picture of the general nature of the state requirements and a discussion of the specific writing skills requirements. The procedures used to compile a…

A Study of Minimum Competency Programs. Final Comprehensive Report. Vol. 1. Vol. 2.

ERIC Educational Resources Information Center

Gorth, William Phillip; Perkins, Marcy R.

The status of minimum competency testing programs, as of June 30, 1979, is given through descriptions of 31 state programs and 20 local district programs. For each program, the following information is provided: legislative and policy history; implementation phase; goals; competencies to be tested; standards and standard setting; target groups and…

Aviation Pilot Training I & II. Flight Syllabus. Field Review Copy.

ERIC Educational Resources Information Center

Upchurch, Richard

This guide for aviation pilot training I and II begins with a course description, resource information, and a course outline. The syllabus is designed to be used concurrently with the ground school program. A minimum of 29 flights are scheduled with a minimum of 40 hours total flight time. Tasks/competencies are categorized into five concept/duty…

Success Stories: Minimum Competencies for Early Adolescents. Family & Consumer Education: Home Economics in the Middle School.

ERIC Educational Resources Information Center

Smith, Frances M.; And Others

This guide, which is intended to help middle-level home economics teachers satisfy the Iowa Vocational Education Standards and Requirements, consists of descriptions of 51 successful learning activities developed by Iowa teachers for helping middle school students master 17 minimum competencies in the following major content areas: personal and…

Problems associated with pooling mark-recapture data prior to estimating stopover length for migratory passerines

Treesearch

Sara R. Morris; Erica M. Turner; David A. Liebner; Amanda M. Larracuente; H. David Sheets

2005-01-01

One measure of the importance of a stopover site is the length of time that migrants spend at an area, however measuring the time birds spend at a stopover site has proven difficult. Most banding studies have presented only minimum length of stopover, based on the difference between initial capture and final recapture of birds that are captured more than once. Cormack-...

Aerodynamic Characteristics of a Refined Deep-step Planing-tail Flying-boat Hull with Various Forebody and Afterbody Shapes

NASA Technical Reports Server (NTRS)

Riebe, John M; Naeseth, Rodger L

1952-01-01

An investigation was made in the Langley 300-mph 7- by 10-foot tunnel to determine the aerodynamic characteristics of a refined deep-step planing-tail hull with various forebody and afterbody shapes and, for comparison, a streamline body simulating the fuselage of a modern transport airplane. The results of the tests indicated that the configurations incorporating a forebody with a length-beam ratio of 7 had lower minimum drag coefficients than the configurations incorporating a forebody with length-beam ratio of 5. The lowest minimum drag coefficients, which were considerably less than that of a conventional hull and slightly less than that of a streamline body, were obtained on the length-beam-ratio-7 forebody, alone and with round center boom. Drag coefficients and longitudinal- and lateral-stability parameters presented include the interference of a 21-percent-thick support wing.

Analysis of Meteorological Satellite location and data collection system concepts

NASA Technical Reports Server (NTRS)

Wallace, R. G.; Reed, D. L.

1981-01-01

A satellite system that employs a spaceborne RF interferometer to determine the location and velocity of data collection platforms attached to meteorological balloons is proposed. This meteorological advanced location and data collection system (MALDCS) is intended to fly aboard a low polar orbiting satellite. The flight instrument configuration includes antennas supported on long deployable booms. The platform location and velocity estimation errors introduced by the dynamic and thermal behavior of the antenna booms and the effects of the presence of the booms on the performance of the spacecraft's attitude control system, and the control system design considerations critical to stable operations are examined. The physical parameters of the Astromast type of deployable boom were used in the dynamic and thermal boom analysis, and the TIROS N system was assumed for the attitude control analysis. Velocity estimation error versus boom length was determined. There was an optimum, minimum error, antenna separation distance. A description of the proposed MALDCS system and a discussion of ambiguity resolution are included.

Patch-Based Generative Shape Model and MDL Model Selection for Statistical Analysis of Archipelagos

NASA Astrophysics Data System (ADS)

Ganz, Melanie; Nielsen, Mads; Brandt, Sami

We propose a statistical generative shape model for archipelago-like structures. These kind of structures occur, for instance, in medical images, where our intention is to model the appearance and shapes of calcifications in x-ray radio graphs. The generative model is constructed by (1) learning a patch-based dictionary for possible shapes, (2) building up a time-homogeneous Markov model to model the neighbourhood correlations between the patches, and (3) automatic selection of the model complexity by the minimum description length principle. The generative shape model is proposed as a probability distribution of a binary image where the model is intended to facilitate sequential simulation. Our results show that a relatively simple model is able to generate structures visually similar to calcifications. Furthermore, we used the shape model as a shape prior in the statistical segmentation of calcifications, where the area overlap with the ground truth shapes improved significantly compared to the case where the prior was not used.

Texting Older Sisters to Step: The TOSS Study.

PubMed

Bowen, Pamela G; Clay, Olivio J; Lee, Loretta T; Browning, Wesley; Schoenberger, Yu-Mei; Martin, Michelle Y

2018-05-01

The purpose of our two-phase study was to develop acceptable text messages to increase physical activity. Four focus groups (two for each phase) were conducted with older African American women who had access to texting-capable mobile phones and were in the contemplation stage for physical activity. The mean age of Phase 1 participants ( n = 12) was 71 and ranged from 65 to 86 years. Content analysis was used to identify fundamental themes that were later used to develop text messages. Six categories emerged from the data and 31 text messages were developed based on focus group input and national recommendations. The mean age of Phase 2 participants ( n = 9) was 67 and ranged from 65 to 75 years. Descriptive statistics revealed 100% of participants understood all messages. When messages were evaluated individually, a minimum of 78% felt each message motivated activity and 67% said lengths were perfect. Findings identified messages that were relevant and potentially motivational to stimulate physical activity among this population.

Boundary-to-Marker Evidence-Controlled Segmentation and MDL-Based Contour Inference for Overlapping Nuclei.

PubMed

Song, Jie; Xiao, Liang; Lian, Zhichao

2017-03-01

This paper presents a novel method for automated morphology delineation and analysis of cell nuclei in histopathology images. Combining the initial segmentation information and concavity measurement, the proposed method first segments clusters of nuclei into individual pieces, avoiding segmentation errors introduced by the scale-constrained Laplacian-of-Gaussian filtering. After that a nuclear boundary-to-marker evidence computing is introduced to delineate individual objects after the refined segmentation process. The obtained evidence set is then modeled by the periodic B-splines with the minimum description length principle, which achieves a practical compromise between the complexity of the nuclear structure and its coverage of the fluorescence signal to avoid the underfitting and overfitting results. The algorithm is computationally efficient and has been tested on the synthetic database as well as 45 real histopathology images. By comparing the proposed method with several state-of-the-art methods, experimental results show the superior recognition performance of our method and indicate the potential applications of analyzing the intrinsic features of nuclei morphology.

How well do WHO complementary feeding indicators relate to nutritional status of children aged 6-23 months in rural Northern Ghana?

PubMed

Saaka, Mahama; Wemakor, Anthony; Abizari, Abdul-Razak; Aryee, Paul

2015-11-23

Though the World Health Organization (WHO) recommended Infant and Young Child Feeding (IYCF) indicators have been in use, little is known about their association with child nutritional status. The objective of this study was to explore the relationship between IYCF indicators (timing of complementary feeding, minimum dietary diversity, minimum meal frequency and minimum acceptable diet) and child growth indicators. A community-based cross-sectional survey was carried out in November 2013. The study population comprised mothers/primary caregivers and their children selected using a two-stage cluster sampling procedure. Of the 1984 children aged 6-23 months; 58.2 % met the minimum meal frequency, 34.8 % received minimum dietary diversity (≥4 food groups), 27.8 % had received minimum acceptable diet and only 15.7 % received appropriate complementary feeding. With respect to nutritional status, 20.5 %, 11.5 % and 21.1 % of the study population were stunted, wasted and underweight respectively. Multiple logistic regression analysis revealed that compared to children who were introduced to complementary feeding either late or early, children who started complementary feeding at six months of age were 25 % protected from chronic malnutrition (AOR = 0.75, CI = 0.50 - 0.95, P = 0.02). It was found that children whose mothers attended antenatal care (ANC) at least 4 times were 34 % protected [AOR 0.66; 95 % CI (0.50 - 0.88)] against stunted growth compared to children born to mothers who attended ANC less than 4 times. Children from households with high household wealth index were 51 % protected [AOR 0.49; 95 % CI (0.26 - 0.94)] against chronic malnutrition compared to children from households with low household wealth index. After adjusting for potential confounders, there was a significant positive association between appropriate complementary feeding index and mean WLZ (β = 0.10, p = 0.005) but was not associated with mean LAZ. The WHO IYCF indicators better explain weight-for-length Z-scores than length-for-age Z-scores of young children in rural Northern Ghana. Furthermore, a composite indicator comprising timely introduction of solid, semi-solid or soft foods at 6 months, minimum meal frequency, and minimum dietary diversity better explains weight-for-length Z-scores than each of the single indicators.

A parametric study of the microwave plasma-assisted combustion of premixed ethylene/air mixtures

NASA Astrophysics Data System (ADS)

Fuh, Che A.; Wu, Wei; Wang, Chuji

2017-11-01

A parametric study of microwave argon plasma assisted combustion (PAC) of premixed ethylene/air mixtures was carried out using visual imaging, optical emission spectroscopy and cavity ringdown spectroscopy as diagnostic tools. The parameters investigated included the plasma feed gas flow rate, the plasma power, the fuel equivalence ratio and the total flow rate of the fuel/air mixture. The combustion enhancement effects were characterized by the minimum ignition power, the flame length and the fuel efficiency of the combustor. It was found that: (1) increasing the plasma feed gas flow rate resulted in a decrease in the flame length, an increase in the minimum ignition power for near stoichiometric fuel equivalence ratios and a corresponding decrease in the minimum ignition power for ultra-lean and rich fuel equivalence ratios; (2) at a constant plasma power, increasing the total flow rate of the ethylene/air mixture from 1.0 slm to 1.5 slm resulted in an increase in the flame length and a reduction in the fuel efficiency; (3) increasing the plasma power resulted in a slight increase in flame length as well as improved fuel efficiency with fewer C2(d) and CH(A) radicals present downstream of the flame; (4) increasing the fuel equivalence ratio caused an increase in flame length but at a reduced fuel efficiency when plasma power was kept constant; and (5) the ground state OH(X) number density was on the order of 1015 molecules/cm3 and was observed to drop downstream along the propagation axis of the flame at all parameters investigated. Results suggest that each of the parameters independently influences the PAC processes.

Optimal fractal tree-like microchannel networks with slip for laminar-flow-modified Murray's law.

PubMed

Jing, Dalei; Song, Shiyu; Pan, Yunlu; Wang, Xiaoming

2018-01-01

The fractal tree-like branched network is an effective channel design structure to reduce the hydraulic resistance as compared with the conventional parallel channel network. In order for a laminar flow to achieve minimum hydraulic resistance, it is believed that the optimal fractal tree-like channel network obeys the well-accepted Murray's law of β m = N -1/3 (β m is the optimal diameter ratio between the daughter channel and the parent channel and N is the branching number at every level), which is obtained under the assumption of no-slip conditions at the channel wall-liquid interface. However, at the microscale, the no-slip condition is not always reasonable; the slip condition should indeed be considered at some solid-liquid interfaces for the optimal design of the fractal tree-like channel network. The present work reinvestigates Murray's law for laminar flow in a fractal tree-like microchannel network considering slip condition. It is found that the slip increases the complexity of the optimal design of the fractal tree-like microchannel network to achieve the minimum hydraulic resistance. The optimal diameter ratio to achieve minimum hydraulic resistance is not only dependent on the branching number, as stated by Murray's law, but also dependent on the slip length, the level number, the length ratio between the daughter channel and the parent channel, and the diameter of the channel. The optimal diameter ratio decreases with the increasing slip length, the increasing level number and the increasing length ratio between the daughter channel and the parent channel, and decreases with decreasing channel diameter. These complicated relations were found to become relaxed and simplified to Murray's law when the ratio between the slip length and the diameter of the channel is small enough.

Geodesy by radio interferometry: Water vapor radiometry for estimation of the wet delay

DOE Office of Scientific and Technical Information (OSTI.GOV)

Elgered, G.; Davis, J.L.; Herring, T.A.

1991-04-10

An important source of error in very-long-baseline interferometry (VLBI) estimates of baseline length is unmodeled variations of the refractivity of the neutral atmosphere along the propagation path of the radio signals. The authors present and discuss the method of using data from a water vapor readiometer (WVR) to correct for the propagation delay caused by atmospheric water vapor, the major cause of these variations. Data from different WVRs are compared with estimated propagation delays obtained by Kalman filtering of the VLBI data themselves. The consequences of using either WVR data of Kalman filtering to correct for atmospheric propagation delay atmore » the Onsala VLBI site are investigated by studying the repeatability of estimated baseline lengths from Onsala to several other sites. The lengths of the baselines range from 919 to 7,941 km. The repeatability obtained for baseline length estimates shows that the methods of water vapor radiometry and Kalman filtering offer comparable accuracies when applied to VLBI observations obtained in the climate of the Swedish west coast. The use of WVR data yielded a 13% smaller weighted-root-mean-square (WRMS) scatter of the baseline length estimates compared to the use of a Kalman filter. It is also clear that the best minimum elevation angle for VLBI observations depends on the accuracy of the determinations of the total propagation delay to be used, since the error in this delay increases with increasing air mass. For use of WVR data along with accurate determinations of total surface pressure, the best minimum is about 20{degrees}; for use of a model for the wet delay based on the humidity and temperature at the ground, the best minimum is about 35{degrees}.« less

49 CFR 38.29 - Interior circulation, handrails and stanchions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... location from the lift or ramp. (b) Handrails and stanchions shall be provided in the entrance to the... length with front-door lifts or ramps, vertical stanchions immediately behind the driver shall either... of 22 feet in length, the minimum interior height along the path from the lift to the securement...

49 CFR 38.29 - Interior circulation, handrails and stanchions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... location from the lift or ramp. (b) Handrails and stanchions shall be provided in the entrance to the... length with front-door lifts or ramps, vertical stanchions immediately behind the driver shall either... of 22 feet in length, the minimum interior height along the path from the lift to the securement...

75 FR 38684 - Federal Acquisition Regulation; FAR Case 2010-008, Recovery Act Subcontract Reporting Procedures

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-02

... workforce. At a minimum, the subcontractor shall provide-- (A) A brief description of the types of jobs... description may rely on job titles, broader labor categories, or the subcontractor's existing practice for... funded awards of $25,000 or more, to report jobs information to the prime contractor for reporting into...

Program of Studies: Industrial Arts: Grades 7-12.

ERIC Educational Resources Information Center

Fairfax County Schools, VA.

The first part of the industrial arts curriculum guide provides brief descriptions of the program and course goals for grades K-12 and a one-page chart of program courses. Part 2 contains unit plans for grades 7-12 which provide unit descriptions, credit values, minimum class times, maximum students per class, prerequisites, and various unit…

Information properties of morphologically complex words modulate brain activity during word reading

PubMed Central

Hultén, Annika; Lehtonen, Minna; Lagus, Krista; Salmelin, Riitta

2018-01-01

Abstract Neuroimaging studies of the reading process point to functionally distinct stages in word recognition. Yet, current understanding of the operations linked to those various stages is mainly descriptive in nature. Approaches developed in the field of computational linguistics may offer a more quantitative approach for understanding brain dynamics. Our aim was to evaluate whether a statistical model of morphology, with well‐defined computational principles, can capture the neural dynamics of reading, using the concept of surprisal from information theory as the common measure. The Morfessor model, created for unsupervised discovery of morphemes, is based on the minimum description length principle and attempts to find optimal units of representation for complex words. In a word recognition task, we correlated brain responses to word surprisal values derived from Morfessor and from other psycholinguistic variables that have been linked with various levels of linguistic abstraction. The magnetoencephalography data analysis focused on spatially, temporally and functionally distinct components of cortical activation observed in reading tasks. The early occipital and occipito‐temporal responses were correlated with parameters relating to visual complexity and orthographic properties, whereas the later bilateral superior temporal activation was correlated with whole‐word based and morphological models. The results show that the word processing costs estimated by the statistical Morfessor model are relevant for brain dynamics of reading during late processing stages. PMID:29524274

Information properties of morphologically complex words modulate brain activity during word reading.

PubMed

Hakala, Tero; Hultén, Annika; Lehtonen, Minna; Lagus, Krista; Salmelin, Riitta

2018-06-01

Neuroimaging studies of the reading process point to functionally distinct stages in word recognition. Yet, current understanding of the operations linked to those various stages is mainly descriptive in nature. Approaches developed in the field of computational linguistics may offer a more quantitative approach for understanding brain dynamics. Our aim was to evaluate whether a statistical model of morphology, with well-defined computational principles, can capture the neural dynamics of reading, using the concept of surprisal from information theory as the common measure. The Morfessor model, created for unsupervised discovery of morphemes, is based on the minimum description length principle and attempts to find optimal units of representation for complex words. In a word recognition task, we correlated brain responses to word surprisal values derived from Morfessor and from other psycholinguistic variables that have been linked with various levels of linguistic abstraction. The magnetoencephalography data analysis focused on spatially, temporally and functionally distinct components of cortical activation observed in reading tasks. The early occipital and occipito-temporal responses were correlated with parameters relating to visual complexity and orthographic properties, whereas the later bilateral superior temporal activation was correlated with whole-word based and morphological models. The results show that the word processing costs estimated by the statistical Morfessor model are relevant for brain dynamics of reading during late processing stages. © 2018 The Authors Human Brain Mapping Published by Wiley Periodicals, Inc.

Comparison of dislocation density tensor fields derived from discrete dislocation dynamics and crystal plasticity simulations of torsion

DOE PAGES

Jones, Reese E.; Zimmerman, Jonathan A.; Po, Giacomo; ...

2016-02-01

Accurate simulation of the plastic deformation of ductile metals is important to the design of structures and components to performance and failure criteria. Many techniques exist that address the length scales relevant to deformation processes, including dislocation dynamics (DD), which models the interaction and evolution of discrete dislocation line segments, and crystal plasticity (CP), which incorporates the crystalline nature and restricted motion of dislocations into a higher scale continuous field framework. While these two methods are conceptually related, there have been only nominal efforts focused at the global material response that use DD-generated information to enhance the fidelity of CPmore » models. To ascertain to what degree the predictions of CP are consistent with those of DD, we compare their global and microstructural response in a number of deformation modes. After using nominally homogeneous compression and shear deformation dislocation dynamics simulations to calibrate crystal plasticity ow rule parameters, we compare not only the system-level stress-strain response of prismatic wires in torsion but also the resulting geometrically necessary dislocation density fields. To establish a connection between explicit description of dislocations and the continuum assumed with crystal plasticity simulations we ascertain the minimum length-scale at which meaningful dislocation density fields appear. Furthermore, our results show that, for the case of torsion, that the two material models can produce comparable spatial dislocation density distributions.« less

Extent of Implementation of Minimum Standards of Basic Education for the Realisation of the Second Millennium Development Goal in Bayelsa State

ERIC Educational Resources Information Center

Ogochukwu, Emeka; Gbendu, Olaowei Godiva

2015-01-01

The study was carried out in Salga Education Zone of Bayelsa State specifically to determine the extent of implementation of the minimum standards for basic education in order to ensure the realization of the second millennium development goal. The study adopted the descriptive research design. The population of the study comprised of all the…

29 CFR 1926.251 - Rigging equipment for material handling.

Code of Federal Regulations, 2012 CFR

2012-07-01

... splices, the U-bolt shall be applied so that the “U” section is in contact with the dead end of the rope... laid grommets and endless slings shall have a minimum circumferential length of 96 times their body... body of the rope using at least two additional tucks (which will require a tail length of approximately...

Efficacy of buffer zones in disconnecting roads and streams in the coastal plain

Treesearch

J.M. III Grace; E. Davis

2010-01-01

Established forest BMPs rely heavily on the forest floor to disconnect upslope activities from stream systems. Optimizing the buffer length required to negate the storm runoff contribution of upslope activities has been a point of interest for soil scientist, hydrologist, and conservation professionals for the last century. Minimum buffer lengths have been recommended...

A Comparison of the Fit of Empirical Data to Two Latent Trait Models. Report No. 92.

ERIC Educational Resources Information Center

Hutten, Leah R.

Goodness of fit of raw test score data were compared, using two latent trait models: the Rasch model and the Birnbaum three-parameter logistic model. Data were taken from various achievement tests and the Scholastic Aptitude Test (Verbal). A minimum sample size of 1,000 was required, and the minimum test length was 40 items. Results indicated that…

Nearshore Pipeline Installation Methods.

DTIC Science & Technology

1981-08-01

inches b) Pipe, materials of construction: fully rigid, semi-rigid, flexible c) Pipeline length, maximum 2 miles d) Pipeline design life , minimum 15...common to their operations. Permanent facilities are specified in the Statement of Work. There- fore, a minimum design life of 15 years is chosen, which...makes the pipe leakproof and resists corrosion and abrasion. 5) Interlocked Z-shaped steel or stainless steel carcass - resists internal and external

Compact microchannel system

DOEpatents

Griffiths, Stewart

2003-09-30

The present invention provides compact geometries for the layout of microchannel columns through the use of turns and straight channel segments. These compact geometries permit the use of long separation or reaction columns on a small microchannel substrate or, equivalently, permit columns of a fixed length to occupy a smaller substrate area. The new geometries are based in part on mathematical analyses that provide the minimum turn radius for which column performance in not degraded. In particular, we find that straight channel segments of sufficient length reduce the required minimum turn radius, enabling compact channel layout when turns and straight segments are combined. The compact geometries are obtained by using turns and straight segments in overlapped or nested arrangements to form pleated or coiled columns.

Predicting paddlefish roe yields using an extension of the Beverton–Holt equilibrium yield-per-recruit model

USGS Publications Warehouse

Colvin, M.E.; Bettoli, Phillip William; Scholten, G.D.

2013-01-01

Equilibrium yield models predict the total biomass removed from an exploited stock; however, traditional yield models must be modified to simulate roe yields because a linear relationship between age (or length) and mature ovary weight does not typically exist. We extended the traditional Beverton-Holt equilibrium yield model to predict roe yields of Paddlefish Polyodon spathula in Kentucky Lake, Tennessee-Kentucky, as a function of varying conditional fishing mortality rates (10-70%), conditional natural mortality rates (cm; 9% and 18%), and four minimum size limits ranging from 864 to 1,016mm eye-to-fork length. These results were then compared to a biomass-based yield assessment. Analysis of roe yields indicated the potential for growth overfishing at lower exploitation rates and smaller minimum length limits than were suggested by the biomass-based assessment. Patterns of biomass and roe yields in relation to exploitation rates were similar regardless of the simulated value of cm, thus indicating that the results were insensitive to changes in cm. Our results also suggested that higher minimum length limits would increase roe yield and reduce the potential for growth overfishing and recruitment overfishing at the simulated cm values. Biomass-based equilibrium yield assessments are commonly used to assess the effects of harvest on other caviar-based fisheries; however, our analysis demonstrates that such assessments likely underestimate the probability and severity of growth overfishing when roe is targeted. Therefore, equilibrium roe yield-per-recruit models should also be considered to guide the management process for caviar-producing fish species.

External morphology and calling song characteristics in Tibicen plebejus (Hemiptera: Cicadidae).

PubMed

Mehdipour, Maedeh; Sendi, Jalal Jalali; Zamanian, Hossein

2015-02-01

Tibicen plebejus is the largest cicada native to the ecosystem in northern Iran. The male cicada produces a loud calling song for attracting females from a long distance. It is presumed that the female selects a mate based on a combination of passive and active mechanisms, but it is not known if she selects for size, nor if the male's size correlates with any characteristic of the advertisement call. In this study, we report the relationship between calling song features and morphological characters in the male of T. plebejus. Research was conducted in northern Iran during the summer of 2010. Seventeen males were collected and their calling songs were recorded in a natural environment. Two morphological characters were measured: length and weight. Maximum, minimum and average of values of 10 key acoustic variables of the calling song were analyzed: phrase duration, phrase part 1, phrase part 2, number of phrases per minute, echeme duration, echeme period, interecheme interval, number of echeme per second, echeme/intereheme ratio, and dominant frequency. The data were tested for the level of association between morphology and acoustic variables using simple linear regression. In conclusion, in terms of song structure, three significant positive correlations existed between length and (1) mean echeme duration, (2) mean echeme/interecheme ratio, (3) maximum echeme/interecheme ratio. We found out also four significant negative correlations between both length and weight with (1) minimum interecheme intervals, (2) mean dominant frequency, (3) minimum dominant frequency, (4) maximum dominant frequency, and between weight and (1) minimum interecheme intervals, (2) mean dominant frequency, (3) minimum dominant frequency, (4) maximum dominant frequency. It can be found that larger males of T. plebejus produce songs of lower frequency and are less silent between echemes. Copyright © 2014 Académie des sciences. Published by Elsevier SAS. All rights reserved.

Descriptive Writing: A Thematic Unit.

ERIC Educational Resources Information Center

Smith, Joanna J.

This thematic unit for teaching descriptive writing is organized around 10 days of lesson plans. The unit begins by asking key questions about descriptive writing and providing information on grade level, ability level, number of lessons and length of classes, and prior knowledge students should have. It also offers a unit rationale and key…

Oceanographic scanner system design study, volume 1

NASA Technical Reports Server (NTRS)

1971-01-01

The design is reported of a dual mode multispectral scanner, capable of satisfying both overland and oceanographic requirements. A complete system description and performance summary of the scanner are given. In addition, subsystem and component descriptions and performance analyses are treated in individual sections. The design of the scanner, with minimum modifications, interfaces to the ERTS spacecraft and the ground data handling system.

Flame Driving of Longitudinal Instabilities in Liquid Fueled Dump Combustors.

DTIC Science & Technology

1987-07-01

plotted in Fig. 8 for the first " natural frequency of 80 Hz. As the flame length is much smaller than the acoustic wavelength at 80 Hz the pressure...velocity u and the near a pressure minimum there was a large radia- flame length . In all cases, it was Found that the tion signal at the driving...frequency. On the theory underpredicted the flame length . This may other hand, when the stabilizing wire was near a be due to the neglect of viscous and

Flame Driving of Longitudinal Instabilities in Liquid Fueled Dump Combustors

DTIC Science & Technology

1988-10-01

for the first * natural frequency of 80 Hz. As the flame length is much smaller than the acoustic wavelength at 80 Hz the pressure is constant over...release at different locations along the flame. The reason for this is that the flame length is equivalent to several vortical wavelengths as is evident...pressure minimum there was a large radla- flame length . In all cases, it was ?ound that the tion signal at the driving frequency. On the theory

The effect of ultradian and orbital cycles on plant growth

NASA Technical Reports Server (NTRS)

Berry, W.; Hoshizaki, T.; Ulrich, A.

1986-01-01

In a series of experiments using sugar beets, researchers investigated the effects of varying cycles lengths on growth (0.37 hr to 48 hr). Each cycle was equally divided into a light and dark period so that each treatment regardless of cycle length received the same amount of light over the 17 weeks of the experiment. Two growth parameters were used to evaluate the effects of cycle length, total fresh weight and sucrose content of the storage root. Both parameters showed very similar responses in that under long cycles (12 hr or greater) growth was normal, whereas plants growing under shorter cycle periods were progressively inhibited. Minimum growth occurred at a cycle period of 0.75 hr. The yield at the 0.75 hr cycle, where was at a minimum, for total fresh weight was only 51 percent compared to the 24 hr cycle. The yield of sucrose was even more reduced at 41 percent of the 24 hr cycle.

Biological and surface-active properties of double-chain cationic amino acid-based surfactants.

PubMed

Greber, Katarzyna E; Dawgul, Małgorzata; Kamysz, Wojciech; Sawicki, Wiesław; Łukasiak, Jerzy

2014-08-01

Cationic amino acid-based surfactants were synthesized via solid phase peptide synthesis and terminal acylation of their α and ε positions with saturated fatty acids. Five new lipopeptides, N-α-acyl-N-ε-acyl lysine analogues, were obtained. Minimum inhibitory concentration and minimum bactericidal (fungicidal) concentration were determined on reference strains of bacteria and fungi to evaluate the antimicrobial activity of the lipopeptides. Toxicity to eukaryotic cells was examined via determination of the haemolytic activities. The surface-active properties of these compounds were evaluated by measuring the surface tension and formation of micelles as a function of concentration in aqueous solution. The cationic surfactants demonstrated diverse antibacterial activities dependent on the length of the fatty acid chain. Gram-negative bacteria and fungi showed a higher resistance than Gram-positive bacterial strains. It was found that the haemolytic activities were also chain length-dependent values. The surface-active properties showed a linear correlation between the alkyl chain length and the critical micelle concentration.

17 CFR 240.15c3-1f - Optional market and credit risk requirements for OTC derivatives dealers (Appendix F to 17 CFR...

Code of Federal Regulations, 2013 CFR

2013-04-01

... observations cannot be less than six months. Historical data sets must be updated at least every three months... quantitative aspects of the model which at a minimum must adhere to the criteria set forth in paragraph (e) of..., a description of how its own theoretical pricing model contains the minimum pricing factors set...

49 CFR 393.110 - What else do I have to do to determine the minimum number of tiedowns?

Code of Federal Regulations, 2010 CFR

2010-10-01

... SAFETY REGULATIONS PARTS AND ACCESSORIES NECESSARY FOR SAFE OPERATION Protection Against Shifting and... meters), and one additional tiedown for every 10 feet (3.04 meters) of article length, or fraction... secured by at least one tiedown for every 3.04 meters (10 feet) of article length, or fraction thereof. (d...

A short tapered stem reduces intraoperative complications in primary total hip arthroplasty.

PubMed

Molli, Ryan G; Lombardi, Adolph V; Berend, Keith R; Adams, Joanne B; Sneller, Michael A

2012-02-01

While short-stem design is not a new concept, interest has surged with increasing utilization of less invasive techniques. Short stems are easier to insert through small incisions. Reliable long-term results including functional improvement, pain relief, and implant survival have been reported with standard tapered stems, but will a short taper perform as well? We compared short, flat-wedge, tapered, broach-only femoral stems to standard-length, double-tapered, ream and broach femoral stems in terms of intraoperative complications, short-term survivorship, and pain and function scores. We retrospectively reviewed the records of 606 patients who had 658 THAs using a less invasive direct lateral approach from January 2006 to March 2008. Three hundred sixty patients (389 hips) had standard-length stems and 246 (269 hips) had short stems. Age averaged 63 years, and body mass index averaged 30.7 kg/m(2). We recorded complications and pain and function scores and computed short-term survival. Minimum followup was 0.8 months (mean, 29.2 months; range, 0.8-62.2 months). We observed a higher rate of intraoperative complications with the standard-length stems (3.1%; three trochanteric avulsions, nine femoral fractures) compared with the shorter stems (0.4%; one femoral fracture) and managed all complications with application of one or more cerclage cables. There were no differences in implant survival, Harris hip score, and Lower Extremity Activity Scale score between groups. Fewer intraoperative complications occurred with the short stems, attesting to the easier insertion of these devices. While longer followup is required, our early results suggest shortened stems can be used with low complication rates and do not compromise the survival and functional outcome of cementless THA. Level III, therapeutic study. See the Guidelines for Authors for a complete description of levels of evidence.

A new fast algorithm for solving the minimum spanning tree problem based on DNA molecules computation.

PubMed

Wang, Zhaocai; Huang, Dongmei; Meng, Huajun; Tang, Chengpei

2013-10-01

The minimum spanning tree (MST) problem is to find minimum edge connected subsets containing all the vertex of a given undirected graph. It is a vitally important NP-complete problem in graph theory and applied mathematics, having numerous real life applications. Moreover in previous studies, DNA molecular operations usually were used to solve NP-complete head-to-tail path search problems, rarely for NP-hard problems with multi-lateral path solutions result, such as the minimum spanning tree problem. In this paper, we present a new fast DNA algorithm for solving the MST problem using DNA molecular operations. For an undirected graph with n vertex and m edges, we reasonably design flexible length DNA strands representing the vertex and edges, take appropriate steps and get the solutions of the MST problem in proper length range and O(3m+n) time complexity. We extend the application of DNA molecular operations and simultaneity simplify the complexity of the computation. Results of computer simulative experiments show that the proposed method updates some of the best known values with very short time and that the proposed method provides a better performance with solution accuracy over existing algorithms. Copyright © 2013 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

Determination of Shapes of Boattail Bodies of Revolution for Minimum Wave Drag

NASA Technical Reports Server (NTRS)

Adams, Mac C.

1951-01-01

By use of an approximate equation for the wave drag of slender bodies of revolution in a supersonic flow field, the optimum shapes of certain boattail bodies are determined for minimum wave drag. The properties of three specific families of bodies are determined, the first family consisting of bodies having a given length and base area and a contour passing through a prescribed point between the nose and base, the second family having fixed length, base area, and maximum area, and the third family having given length, volume, and base area. The method presented is easily generalized to determine minimum-wave-drag profile shapes which have contours that must pass through any prescribed number of points. According to linearized theory, the optimum profiles are found to have infinite slope at the nose but zero radius of curvature so that the bodies appear to have pointed noses, a zero slope at the body base, and no variation of wave drag with Mach number. For those bodies having a specified intermediate.diameter (that is, location and magnitude given), the maximum body diameter is shown to be larger, in general, than the specified diameter. It is also shown that, for bodies having a specified maximum diameter, the location of the maximum diameter is not arbitrary but is determined from the ratio of base diameter to maximum diameter.

Minimum size limits for yellow perch (Perca flavescens) in western Lake Erie

USGS Publications Warehouse

Hartman, Wilbur L.; Nepszy, Stephen J.; Scholl, Russell L.

1980-01-01

During the 1960's yellow perch (Perca flavescens) of Lake Erie supported a commercial fishery that produced an average annual catch of 23 million pounds, as well as a modest sport fishery. Since 1969, the resource has seriously deteriorated. Commercial landings amounted to only 6 million pounds in 1976, and included proportionally more immature perch than in the 1960's. Moreover, no strong year classes were produced between 1965 and 1975. An interagency technical committee was appointed in 1975 by the Lake Erie Committee of the Great Lakes Fishery Commission to develop an interim management strategy that would provide for greater protection of perch in western Lake Erie, where declines have been the most severe. The committee first determined the age structure, growth and mortality rates, maturation schedule, and length-fecundity relationship for the population, and then applied Ricker-type equilibrium yield models to determine the effects of various minimum length limits on yield, production, average stock weight, potential egg deposition, and the Abrosov spawning frequency indicator (average number of spawning opportunities per female). The committee recommended increasing the minimum length limit of 5.0 inches to at least 8.5 inches. Theoretically, this change would increase the average stock weight by 36% and potential egg deposition by 44%, without significantly decreasing yield. Abrosov's spawning frequency indicator would rise from the existing 0.6 to about 1.2.

On the normalization of the minimum free energy of RNAs by sequence length.

PubMed

Trotta, Edoardo

2014-01-01

The minimum free energy (MFE) of ribonucleic acids (RNAs) increases at an apparent linear rate with sequence length. Simple indices, obtained by dividing the MFE by the number of nucleotides, have been used for a direct comparison of the folding stability of RNAs of various sizes. Although this normalization procedure has been used in several studies, the relationship between normalized MFE and length has not yet been investigated in detail. Here, we demonstrate that the variation of MFE with sequence length is not linear and is significantly biased by the mathematical formula used for the normalization procedure. For this reason, the normalized MFEs strongly decrease as hyperbolic functions of length and produce unreliable results when applied for the comparison of sequences with different sizes. We also propose a simple modification of the normalization formula that corrects the bias enabling the use of the normalized MFE for RNAs longer than 40 nt. Using the new corrected normalized index, we analyzed the folding free energies of different human RNA families showing that most of them present an average MFE density more negative than expected for a typical genomic sequence. Furthermore, we found that a well-defined and restricted range of MFE density characterizes each RNA family, suggesting the use of our corrected normalized index to improve RNA prediction algorithms. Finally, in coding and functional human RNAs the MFE density appears scarcely correlated with sequence length, consistent with a negligible role of thermodynamic stability demands in determining RNA size.

On the Normalization of the Minimum Free Energy of RNAs by Sequence Length

PubMed Central

Trotta, Edoardo

2014-01-01

The minimum free energy (MFE) of ribonucleic acids (RNAs) increases at an apparent linear rate with sequence length. Simple indices, obtained by dividing the MFE by the number of nucleotides, have been used for a direct comparison of the folding stability of RNAs of various sizes. Although this normalization procedure has been used in several studies, the relationship between normalized MFE and length has not yet been investigated in detail. Here, we demonstrate that the variation of MFE with sequence length is not linear and is significantly biased by the mathematical formula used for the normalization procedure. For this reason, the normalized MFEs strongly decrease as hyperbolic functions of length and produce unreliable results when applied for the comparison of sequences with different sizes. We also propose a simple modification of the normalization formula that corrects the bias enabling the use of the normalized MFE for RNAs longer than 40 nt. Using the new corrected normalized index, we analyzed the folding free energies of different human RNA families showing that most of them present an average MFE density more negative than expected for a typical genomic sequence. Furthermore, we found that a well-defined and restricted range of MFE density characterizes each RNA family, suggesting the use of our corrected normalized index to improve RNA prediction algorithms. Finally, in coding and functional human RNAs the MFE density appears scarcely correlated with sequence length, consistent with a negligible role of thermodynamic stability demands in determining RNA size. PMID:25405875

Minimum Information about a Spinal Cord Injury Experiment: A Proposed Reporting Standard for Spinal Cord Injury Experiments

PubMed Central

Ferguson, Adam R.; Popovich, Phillip G.; Xu, Xiao-Ming; Snow, Diane M.; Igarashi, Michihiro; Beattie, Christine E.; Bixby, John L.

2014-01-01

Abstract The lack of reproducibility in many areas of experimental science has a number of causes, including a lack of transparency and precision in the description of experimental approaches. This has far-reaching consequences, including wasted resources and slowing of progress. Additionally, the large number of laboratories around the world publishing articles on a given topic make it difficult, if not impossible, for individual researchers to read all of the relevant literature. Consequently, centralized databases are needed to facilitate the generation of new hypotheses for testing. One strategy to improve transparency in experimental description, and to allow the development of frameworks for computer-readable knowledge repositories, is the adoption of uniform reporting standards, such as common data elements (data elements used in multiple clinical studies) and minimum information standards. This article describes a minimum information standard for spinal cord injury (SCI) experiments, its major elements, and the approaches used to develop it. Transparent reporting standards for experiments using animal models of human SCI aim to reduce inherent bias and increase experimental value. PMID:24870067

Barriers and facilitators to the implementation of an evidence-based electronic minimum dataset for nursing team leader handover: A descriptive survey.

PubMed

Spooner, Amy J; Aitken, Leanne M; Chaboyer, Wendy

2017-11-15

There is widespread use of clinical information systems in intensive care units however, the evidence to support electronic handover is limited. The study aim was to assess the barriers and facilitators to use of an electronic minimum dataset for nursing team leader shift-to-shift handover in the intensive care unit prior to its implementation. The study was conducted in a 21-bed medical/surgical intensive care unit, specialising in cardiothoracic surgery at a tertiary referral hospital, in Queensland, Australia. An established tool was modified to the intensive care nursing handover context and a survey of all 63 nursing team leaders was undertaken. Survey statements were rated using a 6-point Likert scale with selections from 'strongly disagree' to 'strongly agree', and open-ended questions. Descriptive statistics were used to summarise results. A total of 39 team leaders responded to the survey (62%). Team leaders used general intensive care work unit guidelines to inform practice however they were less familiar with the intensive care handover work unit guideline. Barriers to minimum dataset uptake included: a tool that was not user friendly, time consuming and contained too much information. Facilitators to minimum dataset adoption included: a tool that was user friendly, saved time and contained relevant information. Identifying the complexities of a healthcare setting prior to the implementation of an intervention assists researchers and clinicians to integrate new knowledge into healthcare settings. Barriers and facilitators to knowledge use focused on usability, content and efficiency of the electronic minimum dataset and can be used to inform tailored strategies to optimise team leaders' adoption of a minimum dataset for handover. Copyright © 2017 Australian College of Critical Care Nurses Ltd. Published by Elsevier Ltd. All rights reserved.

46 CFR 169.203 - Description.

Code of Federal Regulations, 2010 CFR

2010-10-01

... issued to a vessel describes the vessel, the route which it may travel, the minimum manning requirements... required to be carried, the maximum number of sailing school students and instructors and the maximum...

5 CFR 890.1008 - Mandatory debarment for longer than the minimum length.

Code of Federal Regulations, 2011 CFR

2011-01-01

... (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Mandatory Debarments § 890.1008 Mandatory debarment for...

34 CFR 668.10 - Direct assessment programs.

Code of Federal Regulations, 2013 CFR

2013-07-01

... student will do (e.g., required readings, research, and work products), how the student's work will be... including, if applicable, minimum program length and qualitative factors. (d) Notwithstanding paragraphs (a...

34 CFR 668.10 - Direct assessment programs.

Code of Federal Regulations, 2012 CFR

2012-07-01

... student will do (e.g., required readings, research, and work products), how the student's work will be... including, if applicable, minimum program length and qualitative factors. (d) Notwithstanding paragraphs (a...

34 CFR 668.10 - Direct assessment programs.

Code of Federal Regulations, 2014 CFR

2014-07-01

... student will do (e.g., required readings, research, and work products), how the student's work will be... including, if applicable, minimum program length and qualitative factors. (d) Notwithstanding paragraphs (a...

Cooperative organic mine avoidance path planning

NASA Astrophysics Data System (ADS)

McCubbin, Christopher B.; Piatko, Christine D.; Peterson, Adam V.; Donnald, Creighton R.; Cohen, David

2005-06-01

The JHU/APL Path Planning team has developed path planning techniques to look for paths that balance the utility and risk associated with different routes through a minefield. Extending on previous years' efforts, we investigated real-world Naval mine avoidance requirements and developed a tactical decision aid (TDA) that satisfies those requirements. APL has developed new mine path planning techniques using graph based and genetic algorithms which quickly produce near-minimum risk paths for complicated fitness functions incorporating risk, path length, ship kinematics, and naval doctrine. The TDA user interface, a Java Swing application that obtains data via Corba interfaces to path planning databases, allows the operator to explore a fusion of historic and in situ mine field data, control the path planner, and display the planning results. To provide a context for the minefield data, the user interface also renders data from the Digital Nautical Chart database, a database created by the National Geospatial-Intelligence Agency containing charts of the world's ports and coastal regions. This TDA has been developed in conjunction with the COMID (Cooperative Organic Mine Defense) system. This paper presents a description of the algorithms, architecture, and application produced.

An information theory criteria based blind method for enumerating active users in DS-CDMA system

NASA Astrophysics Data System (ADS)

Samsami Khodadad, Farid; Abed Hodtani, Ghosheh

2014-11-01

In this paper, a new and blind algorithm for active user enumeration in asynchronous direct sequence code division multiple access (DS-CDMA) in multipath channel scenario is proposed. The proposed method is based on information theory criteria. There are two main categories of information criteria which are widely used in active user enumeration, Akaike Information Criterion (AIC) and Minimum Description Length (MDL) information theory criteria. The main difference between these two criteria is their penalty functions. Due to this difference, MDL is a consistent enumerator which has better performance in higher signal-to-noise ratios (SNR) but AIC is preferred in lower SNRs. In sequel, we propose a SNR compliance method based on subspace and training genetic algorithm to have the performance of both of them. Moreover, our method uses only a single antenna, in difference to the previous methods which decrease hardware complexity. Simulation results show that the proposed method is capable of estimating the number of active users without any prior knowledge and the efficiency of the method.

The impact of joint ventures on U.S. hospitals.

PubMed

Harrison, Jeffrey P

2006-01-01

This quantitative research study assesses the organizational characteristics, market factors, and profitability of US hospitals that operate joint ventures with other health care organizations. Data was obtained from the 2001 American Hospital Association annual survey, the Area Resource File, and the Center for Medicare and Medicaid Services Minimum Data Set. These data files provide essential information on individual acute care hospitals, the communities they serve, and the level of financial performance. Descriptive statistics were evaluated and a logistic regression model was utilized to examine hospitals operating joint ventures. The study found hospitals that operate joint ventures are located in communities with more elderly patients, lower unemployment, and lower HMO penetration. From an operating performance perspective, hospitals that operate joint ventures have a higher occupancy rate, a higher average length of stay, more clinical services, lower long-term debt, and a greater number of managed care contracts. The results also appear to indicate that joint ventures have a positive financial impact on US hospitals. The study has managerial implications supporting the use of joint ventures to improve hospital performance and policy implications on resource allocation.

Development and evaluation of statistical shape modeling for principal inner organs on torso CT images.

PubMed

Zhou, Xiangrong; Xu, Rui; Hara, Takeshi; Hirano, Yasushi; Yokoyama, Ryujiro; Kanematsu, Masayuki; Hoshi, Hiroaki; Kido, Shoji; Fujita, Hiroshi

2014-07-01

The shapes of the inner organs are important information for medical image analysis. Statistical shape modeling provides a way of quantifying and measuring shape variations of the inner organs in different patients. In this study, we developed a universal scheme that can be used for building the statistical shape models for different inner organs efficiently. This scheme combines the traditional point distribution modeling with a group-wise optimization method based on a measure called minimum description length to provide a practical means for 3D organ shape modeling. In experiments, the proposed scheme was applied to the building of five statistical shape models for hearts, livers, spleens, and right and left kidneys by use of 50 cases of 3D torso CT images. The performance of these models was evaluated by three measures: model compactness, model generalization, and model specificity. The experimental results showed that the constructed shape models have good "compactness" and satisfied the "generalization" performance for different organ shape representations; however, the "specificity" of these models should be improved in the future.

Continuous-wave cavity ringdown spectroscopy based on the control of cavity reflection.

PubMed

Li, Zhixin; Ma, Weiguang; Fu, Xiaofang; Tan, Wei; Zhao, Gang; Dong, Lei; Zhang, Lei; Yin, Wangbao; Jia, Suotang

2013-07-29

A new type of continuous-wave cavity ringdown spectrometer based on the control of cavity reflection for trace gas detection was designed and evaluated. The technique separated the acquisitions of the ringdown event and the trigger signal to optical switch by detecting the cavity reflection and transmission, respectively. A detailed description of the time sequence of the measurement process was presented. In order to avoid the wrong extraction of ringdown time encountered accidentally in fitting procedure, the laser frequency and cavity length were scanned synchronously. Based on the statistical analysis of measured ringdown times, the frequency normalized minimum detectable absorption in the reflection control mode was 1.7 × 10(-9)cm(-1)Hz(-1/2), which was 5.4 times smaller than that in the transmission control mode. However the signal-to-noise ratio of the absorption spectrum was only 3 times improved since the etalon effect existed. Finally, the peak absorption coefficients of the C(2)H(2) transition near 1530.9nm under different pressures showed a good agreement with the theoretical values.

Emergence of linear elasticity from the atomistic description of matter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cakir, Abdullah, E-mail: acakir@ntu.edu.sg; Pica Ciamarra, Massimo; Dipartimento di Scienze Fisiche, CNR–SPIN, Università di Napoli Federico II, I-80126 Napoli

2016-08-07

We investigate the emergence of the continuum elastic limit from the atomistic description of matter at zero temperature considering how locally defined elastic quantities depend on the coarse graining length scale. Results obtained numerically investigating different model systems are rationalized in a unifying picture according to which the continuum elastic limit emerges through a process determined by two system properties, the degree of disorder, and a length scale associated to the transverse low-frequency vibrational modes. The degree of disorder controls the emergence of long-range local shear stress and shear strain correlations, while the length scale influences the amplitude of themore » fluctuations of the local elastic constants close to the jamming transition.« less

Phase Retrieval from Modulus Using Homeomorphic Signal Processing and the Complex Cepstrum: An Algorithm for Lightning Protection Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clark, G A

2004-06-08

In general, the Phase Retrieval from Modulus problem is very difficult. In this report, we solve the difficult, but somewhat more tractable case in which we constrain the solution to a minimum phase reconstruction. We exploit the real-and imaginary part sufficiency properties of the Fourier and Hilbert Transforms of causal sequences to develop an algorithm for reconstructing spectral phase given only spectral modulus. The algorithm uses homeomorphic signal processing methods with the complex cepstrum. The formal problem of interest is: Given measurements of only the modulus {vert_bar}H(k){vert_bar} (no phase) of the Discrete Fourier Transform (DFT) of a real, finite-length, stable,more » causal time domain signal h(n), compute a minimum phase reconstruction {cflx h}(n) of the signal. Then compute the phase of {cflx h}(n) using a DFT, and exploit the result as an estimate of the phase of h(n). The development of the algorithm is quite involved, but the final algorithm and its implementation are very simple. This work was motivated by a Phase Retrieval from Modulus Problem that arose in LLNL Defense Sciences Engineering Division (DSED) projects in lightning protection for buildings. The measurements are limited to modulus-only spectra from a spectrum analyzer. However, it is desired to perform system identification on the building to compute impulse responses and transfer functions that describe the amount of lightning energy that will be transferred from the outside of the building to the inside. This calculation requires knowledge of the entire signals (both modulus and phase). The algorithm and software described in this report are proposed as an approach to phase retrieval that can be used for programmatic needs. This report presents a brief tutorial description of the mathematical problem and the derivation of the phase retrieval algorithm. The efficacy of the theory is demonstrated using simulated signals that meet the assumptions of the algorithm. We see that for the noiseless case, the reconstructions are extremely accurate. When moderate to heavy simulated white Gaussian noise was added, the algorithm performance remained reasonably robust, especially in the low frequency part of the spectrum, which is the part of most interest for lightning protection. Limitations of the algorithm include the following: (1) It does not account for noise in the given spectral modulus. Fortunately, the lightning protection signals of interest generally have a reasonably high signal-to-noise ratio (SNR). (2) The DFT length N must be even and larger than the length of the nonzero part of the measured signals. These constraints are simple to meet in practice. (3) Regardless of the properties of the actual signal h(n), the phase retrieval results are constrained to have the minimum phase property. In most problems of practical interest, these assumptions are very reasonable and probably valid. They are reasonable assumptions for Lightning Protection applications. Proposed future work includes (a) Evaluating the efficacy of the algorithm with real Lightning Protection signals from programmatic applications, (b) Performing a more rigorous analysis of noise effects, (c) Using the algorithm along with advanced system identification algorithms to estimate impulse responses and transfer functions, (d) Developing algorithms to deal with measured partial (truncated) spectral moduli, and (e) R & D of phase retrieval algorithms that specifically deal with general (not necessarily minimum phase) signals, and noisy spectral moduli.« less

Variation of Solar, Interplanetary and Geomagnetic Parameters during Solar Cycles 21-24

NASA Astrophysics Data System (ADS)

Oh, Suyeon; Kim, Bogyeong

2013-06-01

The length of solar cycle 23 has been prolonged up to about 13 years. Many studies have speculated that the solar cycle 23/24 minimum will indicate the onset of a grand minimum of solar activity, such as the Maunder Minimum. We check the trends of solar (sunspot number, solar magnetic fields, total solar irradiance, solar radio flux, and frequency of solar X-ray flare), interplanetary (interplanetary magnetic field, solar wind and galactic cosmic ray intensity), and geomagnetic (Ap index) parameters (SIG parameters) during solar cycles 21-24. Most SIG parameters during the period of the solar cycle 23/24 minimum have remarkably low values. Since the 1970s, the space environment has been monitored by ground observatories and satellites. Such prevalently low values of SIG parameters have never been seen. We suggest that these unprecedented conditions of SIG parameters originate from the weakened solar magnetic fields. Meanwhile, the deep 23/24 solar cycle minimum might be the portent of a grand minimum in which the global mean temperature of the lower atmosphere is as low as in the period of Dalton or Maunder minimum.

Final bubble lengths for aqueous foam coarsened in a horizontal cylinder

NASA Astrophysics Data System (ADS)

Sebag, V.; Roth, A. E.; Durian, D. J.

2011-12-01

We report on length statistics measured for bubbles in the equilibrium bamboo state, achieved by the coarsening of aqueous foam in long cylindrical tubes, such that the soap films are all flat and perpendicular to the axis of the tube. The average bubble length is found to be 0.88 times the tube diameter, independent of variation of the liquid filling fraction by a factor of nearly three. The actual distribution is well-approximated by a shifted Rayleigh form, with a minimum bubble size of 0.28 tube diameters. And, perhaps surprisingly, no correlations are found in the lengths of neighboring bubbles. The observed length distribution agrees with that of Fortes et al. for short bubbles, but not for long bubbles.

40 CFR 30.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-07-01

... characteristics or minimum acceptable standards. (iv) The specific features of “brand name or equal” descriptions..., specifies a “brand name” product. (4) The proposed award over the small purchase threshold is to be awarded...

22 CFR 145.44 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-04-01

... characteristics or minimum acceptable standards. (iv) The specific features of “brand name or equal” descriptions... “brand name” product. (4) The proposed award over the small purchase limitation is to be awarded to other...

42 CFR 1007.15 - Applications, certification and recertification.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., or other document sets forth the formal procedures required under § 1007.7(b), or the formal working..., and experience of all senior professional staff already employed and job descriptions, with minimum...

40 CFR 503.22 - General requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... be closed and, at a minimum, shall include: (1) A discussion of how the leachate collection system... sludge unit has a liner and leachate collection system. (2) A description of the system used to monitor...

40 CFR 503.22 - General requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... be closed and, at a minimum, shall include: (1) A discussion of how the leachate collection system... sludge unit has a liner and leachate collection system. (2) A description of the system used to monitor...

40 CFR 503.22 - General requirements.

Code of Federal Regulations, 2010 CFR

2010-07-01

... be closed and, at a minimum, shall include: (1) A discussion of how the leachate collection system... sludge unit has a liner and leachate collection system. (2) A description of the system used to monitor...

40 CFR 503.22 - General requirements.

Code of Federal Regulations, 2013 CFR

2013-07-01

... be closed and, at a minimum, shall include: (1) A discussion of how the leachate collection system... sludge unit has a liner and leachate collection system. (2) A description of the system used to monitor...

40 CFR 503.22 - General requirements.

Code of Federal Regulations, 2014 CFR

2014-07-01

... be closed and, at a minimum, shall include: (1) A discussion of how the leachate collection system... sludge unit has a liner and leachate collection system. (2) A description of the system used to monitor...

30 CFR 950.16 - Required program amendments.

Code of Federal Regulations, 2011 CFR

2011-07-01

... provide that the groundwater quality description in a permit application must include pH. (i) By June 30... propose to amend its program to specify the minimum groundwater quality parameters that must be monitored...

30 CFR 950.16 - Required program amendments.

Code of Federal Regulations, 2013 CFR

2013-07-01

... provide that the groundwater quality description in a permit application must include pH. (i) By June 30... propose to amend its program to specify the minimum groundwater quality parameters that must be monitored...

30 CFR 950.16 - Required program amendments.

Code of Federal Regulations, 2012 CFR

2012-07-01

... provide that the groundwater quality description in a permit application must include pH. (i) By June 30... propose to amend its program to specify the minimum groundwater quality parameters that must be monitored...

Selected low-flow frequency statistics for continuous-record streamgage locations in Maryland, 2010

USGS Publications Warehouse

Doheny, Edward J.; Banks, William S.L.

2010-01-01

According to a 2008 report by the Governor's Advisory Committee on the Management and Protection of the State's Water Resources, Maryland's population grew by 35 percent between 1970 and 2000, and is expected to increase by an additional 27 percent between 2000 and 2030. Because domestic water demand generally increases in proportion to population growth, Maryland will be facing increased pressure on water resources over the next 20 years. Water-resources decisions should be based on sound, comprehensive, long-term data and low-flow frequency statistics from all available streamgage locations with unregulated streamflow and adequate record lengths. To provide the Maryland Department of the Environment with tools for making future water-resources decisions, the U.S. Geological Survey initiated a study in October 2009 to compute low-flow frequency statistics for selected streamgage locations in Maryland with 10 or more years of continuous streamflow records. This report presents low-flow frequency statistics for 114 continuous-record streamgage locations in Maryland. The computed statistics presented for each streamgage location include the mean 7-, 14-, and 30-consecutive day minimum daily low-flow dischages for recurrence intervals of 2, 10, and 20 years, and are based on approved streamflow records that include a minimum of 10 complete climatic years of record as of June 2010. Descriptive information for each of these streamgage locations, including the station number, station name, latitude, longitude, county, physiographic province, and drainage area, also is presented. The statistics are planned for incorporation into StreamStats, which is a U.S. Geological Survey Web application for obtaining stream information, and is being used by water-resource managers and decision makers in Maryland to address water-supply planning and management, water-use appropriation and permitting, wastewater and industrial discharge permitting, and setting minimum required streamflows to protect freshwater biota and ecosystems.

Dynamic simulation of relief line during loss of insulation vacuum of the ITER cryoline

NASA Astrophysics Data System (ADS)

Badgujar, S.; Kosek, J.; Grillot, D.; Forgeas, A.; Sarkar, B.; Shah, N.; Choukekar, K.; Chang, H.-S.

2017-12-01

The ITER cryoline (CL) system consists of 37 types of vacuum jacketed transfer lines which forms a complex structured network with a total length of about 5 km, spread inside the Tokamak building, on a dedicated plant bridge and in the Cryoplant building/area. One of them, the low pressure relief line (RL) recovers helium discharged from process safety relief valves of the different cryogenic users and is sent it back to the Cryoplant via heater and recovery system. The process pipe diameters of the RL vary from DN 50 to DN 200 and the length is more than 1500 m. Loss of insulation vacuum (LIV) of a CL is one of the worst scenarios apart from LIV in Auxiliary Cold Boxes (ACBs). The Torus and Cryostat CL is chosen to simulate the virtual LIV and to study the anticipated behavior of the RL. Both helium LIV (LIV due to leak in helium pipe) and air LIV (LIV due to air ingress in outer vacuum jacket of the cryoline) with and without fire) have been simulated during this study. After the brief description of the CL system, the paper will describe the EcosimPro® model prepared for the dynamic study. The paper will also describe the results like minimum temperature of RL, mass flow and maximum pressure in the RL which are essentially used to choose the type and location of safety relief devices to protect the CL process pipes.

Development of the Forensically Important Beetle Creophilus maxillosus (Coleoptera: Staphylinidae) at Constant Temperatures.

PubMed

Wang, Y; Yang, J B; Wang, J F; Li, L L; Wang, M; Yang, L J; Tao, L Y; Chu, J; Hou, Y D

2017-03-01

Creophilus maxillosus (L., 1758) is a common and widely distributed beetle species found on corpses, and its development duration is far longer than species belonging to the genus Calliphoridae and Sarcophagidae. Therefore, C. maxillosus can be used as a supplementary indicator to estimate minimum postmortem interval (PMImin), and could greatly extend the range of PMImin when the primary colonizers are no longer associated with the corpse or have emerged from pupae. Better descriptions of C. maxillosus development are needed to apply this species for forensic investigations. In this study, the development of C. maxillosus at seven constant temperatures ranging from 17.5-32.5 °C was studied. Through regression analyses, the simulation equations of larval body length variation with time after hatching were obtained. Isomegalen diagrams of the changes of larval body length over time at specific temperatures, and the isomorphen diagrams on the duration of different developmental milestones at specific temperatures were generated. In addition, thermal summation models of different developmental stages and the overall development process of C. maxillosus were generated through regression analysis, by estimating the development threshold temperatures (D0) and the thermal summation constants (K). These results provide important tools for forensic investigations to generate a long-range of PMImin estimation based on the development of C. maxillosus. © The Authors 2016. Published by Oxford University Press on behalf of Entomological Society of America. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Minimally invasive locked plating of distal tibia fractures is safe and effective.

PubMed

Ronga, Mario; Longo, Umile Giuseppe; Maffulli, Nicola

2010-04-01

Distal tibial fractures are difficult to manage. Limited soft tissue and poor vascularity impose limitations for traditional plating techniques that require large exposures. The nature of the limitations for traditional plating techniques is intrinsic to the large exposure required to approach distal tibia, a bone characterized by limited soft tissue coverage and poor vascularity. The locking plate (LP) is a new device for treatment of fractures. We assessed the bone union rate, deformity, leg-length discrepancy, ankle range of motion, return to preinjury activities, infection, and complication rate in 21 selected patients who underwent minimally invasive osteosynthesis of closed distal tibia fractures with an LP. According to the AO classification, there were 12 Type A, 5 Type B, and 4 Type C fractures. The minimum followup was 2 years (average, 2.8 years; range, 2-4 years). Two patients were lost to followup. Union was achieved in all but one patient by the 24th postoperative week. Four patients had angular deformity less than 7 degrees . No patient had a leg-length discrepancy more than 1.1 cm. Five patients had ankle range of motion less than 20 degrees compared with the contralateral side. Sixteen patients had not returned to their preinjury sporting or leisure activities. Three patients developed a delayed infection. We judge the LP a reasonable device for treating distal tibia fractures. The level of physical activities appears permanently reduced in most patients. Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Oscillations in stellar atmospheres

NASA Technical Reports Server (NTRS)

Costa, A.; Ringuelet, A. E.; Fontenla, J. M.

1989-01-01

Atmospheric excitation and propagation of oscillations are analyzed for typical pulsating stars. The linear, plane-parallel approach for the pulsating atmosphere gives a local description of the phenomenon. From the local analysis of oscillations, the minimum frequencies are obtained for radially propagating waves. The comparison of the minimum frequencies obtained for a variety of stellar types is in good agreement with the observed periods of the oscillations. The role of the atmosphere in the globar stellar pulsations is thus emphasized.

A fully covariant information-theoretic ultraviolet cutoff for scalar fields in expanding Friedmann Robertson Walker spacetimes

NASA Astrophysics Data System (ADS)

Kempf, A.; Chatwin-Davies, A.; Martin, R. T. W.

2013-02-01

While a natural ultraviolet cutoff, presumably at the Planck length, is widely assumed to exist in nature, it is nontrivial to implement a minimum length scale covariantly. This is because the presence of a fixed minimum length needs to be reconciled with the ability of Lorentz transformations to contract lengths. In this paper, we implement a fully covariant Planck scale cutoff by cutting off the spectrum of the d'Alembertian. In this scenario, consistent with Lorentz contractions, wavelengths that are arbitrarily smaller than the Planck length continue to exist. However, the dynamics of modes of wavelengths that are significantly smaller than the Planck length possess a very small bandwidth. This has the effect of freezing the dynamics of such modes. While both wavelengths and bandwidths are frame dependent, Lorentz contraction and time dilation conspire to make the freezing of modes of trans-Planckian wavelengths covariant. In particular, we show that this ultraviolet cutoff can be implemented covariantly also in curved spacetimes. We focus on Friedmann Robertson Walker spacetimes and their much-discussed trans-Planckian question: The physical wavelength of each comoving mode was smaller than the Planck scale at sufficiently early times. What was the mode's dynamics then? Here, we show that in the presence of the covariant UV cutoff, the dynamical bandwidth of a comoving mode is essentially zero up until its physical wavelength starts exceeding the Planck length. In particular, we show that under general assumptions, the number of dynamical degrees of freedom of each comoving mode all the way up to some arbitrary finite time is actually finite. Our results also open the way to calculating the impact of this natural UV cutoff on inflationary predictions for the cosmic microwave background.

Aging and cardiovascular complexity: effect of the length of RR tachograms

PubMed Central

Nagaraj, Nithin

2016-01-01

As we age, our hearts undergo changes that result in a reduction in complexity of physiological interactions between different control mechanisms. This results in a potential risk of cardiovascular diseases which are the number one cause of death globally. Since cardiac signals are nonstationary and nonlinear in nature, complexity measures are better suited to handle such data. In this study, three complexity measures are used, namely Lempel–Ziv complexity (LZ), Sample Entropy (SampEn) and Effort-To-Compress (ETC). We determined the minimum length of RR tachogram required for characterizing complexity of healthy young and healthy old hearts. All the three measures indicated significantly lower complexity values for older subjects than younger ones. However, the minimum length of heart-beat interval data needed differs for the three measures, with LZ and ETC needing as low as 10 samples, whereas SampEn requires at least 80 samples. Our study indicates that complexity measures such as LZ and ETC are good candidates for the analysis of cardiovascular dynamics since they are able to work with very short RR tachograms. PMID:27957395

The flame structure and vorticity generated by a chemically reacting transverse jet

NASA Technical Reports Server (NTRS)

Karagozian, A. R.

1986-01-01

An analytical model describing the behavior of a turbulent fuel jet injected normally into a cross flow is developed. The model places particular emphasis on the contrarotating vortex pair associated with the jet, and predicts the flame length and shape based on entrainment of the oxidizer by the fuel jet. Effects of buoyancy and density variations in the flame are neglected in order to isolate the effects of large-scale mixing. The results are compared with a simulation of the transverse reacting jet in a liquid (acid-base) system. For a wide range of ratios of the cross flow to jet velocity, the model predicts flame length quite well. In particular, the observed transitional behavior in the flame length between cross-flow velocity to jet velocity of orifice ratios of 0.0 to 0.1, yielding an approximate minimum at the ratio 0.05, is reproduced very clearly by the present model. The transformation in flow structure that accounts for this minimum arises from the differing components of vorticity dominant in the near-field and far-field regions of the jet.

cWINNOWER algorithm for finding fuzzy dna motifs

NASA Technical Reports Server (NTRS)

Liang, S.; Samanta, M. P.; Biegel, B. A.

2004-01-01

The cWINNOWER algorithm detects fuzzy motifs in DNA sequences rich in protein-binding signals. A signal is defined as any short nucleotide pattern having up to d mutations differing from a motif of length l. The algorithm finds such motifs if a clique consisting of a sufficiently large number of mutated copies of the motif (i.e., the signals) is present in the DNA sequence. The cWINNOWER algorithm substantially improves the sensitivity of the winnower method of Pevzner and Sze by imposing a consensus constraint, enabling it to detect much weaker signals. We studied the minimum detectable clique size qc as a function of sequence length N for random sequences. We found that qc increases linearly with N for a fast version of the algorithm based on counting three-member sub-cliques. Imposing consensus constraints reduces qc by a factor of three in this case, which makes the algorithm dramatically more sensitive. Our most sensitive algorithm, which counts four-member sub-cliques, needs a minimum of only 13 signals to detect motifs in a sequence of length N = 12,000 for (l, d) = (15, 4). Copyright Imperial College Press.

cWINNOWER Algorithm for Finding Fuzzy DNA Motifs

NASA Technical Reports Server (NTRS)

Liang, Shoudan

2003-01-01

The cWINNOWER algorithm detects fuzzy motifs in DNA sequences rich in protein-binding signals. A signal is defined as any short nucleotide pattern having up to d mutations differing from a motif of length l. The algorithm finds such motifs if multiple mutated copies of the motif (i.e., the signals) are present in the DNA sequence in sufficient abundance. The cWINNOWER algorithm substantially improves the sensitivity of the winnower method of Pevzner and Sze by imposing a consensus constraint, enabling it to detect much weaker signals. We studied the minimum number of detectable motifs qc as a function of sequence length N for random sequences. We found that qc increases linearly with N for a fast version of the algorithm based on counting three-member sub-cliques. Imposing consensus constraints reduces qc, by a factor of three in this case, which makes the algorithm dramatically more sensitive. Our most sensitive algorithm, which counts four-member sub-cliques, needs a minimum of only 13 signals to detect motifs in a sequence of length N = 12000 for (l,d) = (15,4).

Balancing building and maintenance costs in growing transport networks

NASA Astrophysics Data System (ADS)

Bottinelli, Arianna; Louf, Rémi; Gherardi, Marco

2017-09-01

The costs associated to the length of links impose unavoidable constraints to the growth of natural and artificial transport networks. When future network developments cannot be predicted, the costs of building and maintaining connections cannot be minimized simultaneously, requiring competing optimization mechanisms. Here, we study a one-parameter nonequilibrium model driven by an optimization functional, defined as the convex combination of building cost and maintenance cost. By varying the coefficient of the combination, the model interpolates between global and local length minimization, i.e., between minimum spanning trees and a local version known as dynamical minimum spanning trees. We show that cost balance within this ensemble of dynamical networks is a sufficient ingredient for the emergence of tradeoffs between the network's total length and transport efficiency, and of optimal strategies of construction. At the transition between two qualitatively different regimes, the dynamics builds up power-law distributed waiting times between global rearrangements, indicating a point of nonoptimality. Finally, we use our model as a framework to analyze empirical ant trail networks, showing its relevance as a null model for cost-constrained network formation.

Electron cooling of a bunched ion beam in a storage ring

NASA Astrophysics Data System (ADS)

Zhao, He; Mao, Lijun; Yang, Jiancheng; Xia, Jiawen; Yang, Xiaodong; Li, Jie; Tang, Meitang; Shen, Guodong; Ma, Xiaoming; Wu, Bo; Wang, Geng; Ruan, Shuang; Wang, Kedong; Dong, Ziqiang

2018-02-01

A combination of electron cooling and rf system is an effective method to compress the beam bunch length in storage rings. A simulation code based on multiparticle tracking was developed to calculate the bunched ion beam cooling process, in which the electron cooling, intrabeam scattering (IBS), ion beam space-charge field, transverse and synchrotron motion are considered. Meanwhile, bunched ion beam cooling experiments have been carried out in the main cooling storage ring (CSRm) of the Heavy Ion Research Facility in Lanzhou, to investigate the minimum bunch length obtained by the cooling method, and study the dependence of the minimum bunch length on beam and machine parameters. The experiments show comparable results to those from simulation. Based on these simulations and experiments, we established an analytical model to describe the limitation of the bunch length of the cooled ion beam. It is observed that the IBS effect is dominant for low intensity beams, and the space-charge effect is much more important for high intensity beams. Moreover, the particles will not be bunched for much higher intensity beam. The experimental results in CSRm show a good agreement with the analytical model in the IBS dominated regime. The simulation work offers us comparable results to those from the analytical model both in IBS dominated and space-charge dominated regimes.

SU-E-I-16: Scan Length Dependency of the Radial Dose Distribution in a Long Polyethylene Cylinder

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bakalyar, D; McKenney, S; Feng, W

Purpose: The area-averaged dose in the central plane of a long cylinder following a CT scan depends upon the radial dose distribution and the length of the scan. The ICRU/TG200 phantom, a polyethylene cylinder 30 cm in diameter and 60 cm long, was the subject of this study. The purpose was to develop an analytic function that could determine the dose for a scan length L at any point in the central plane of this phantom. Methods: Monte Carlo calculations were performed on a simulated ICRU/TG200 phantom under conditions of cylindrically symmetric conditions of irradiation. Thus, the radial dose distributionmore » function must be an even function that accounts for two competing effects: The direct beam makes its weakest contribution at the center while the scatter begins abruptly at the outer radius and grows as the center is approached. The scatter contribution also increases with scan length with the increase approaching its limiting value at the periphery faster than along the central axis. An analytic function was developed that fit the data and possessed these features. Results: Symmetry and continuity dictate a local extremum at the center which is a minimum for the ICRU/TG200 phantom. The relative depth of the minimum decreases as the scan length grows and an absolute maximum can occur between the center and outer edge of the cylinders. As the scan length grows, the relative dip in the center decreases so that for very long scan lengths, the dose profile is relatively flat. Conclusion: An analytic function characterizes the radial and scan length dependency of dose for long cylindrical phantoms. The function can be integrated with the results expressed in closed form. One use for this is to help determine average dose distribution over the central cylinder plane for any scan length.« less

Optimal Guiding Catheter Length for Endovascular Coiling of Intracranial Aneurysms in Anterior Circulation in Era of Flourishing Distal Access System

PubMed Central

Jia, Zhen Yu; Lee, Sang Hun; Kim, Young Eun; Choi, Joon Ho; Hwang, Sun Moon; Lee, Ga Young; Youn, Jin Ho

2017-01-01

Purpose To determine the minimum required guiding catheter length for embolization of various intracranial aneurysms in anterior circulation and to analyze the effect of various patient factors on the required catheter length and potential interaction with its stability. Materials and Methods From December 2016 to March 2017, 90 patients with 93 anterior circulation aneurysms were enrolled. Three types of guiding catheters (Envoy, Envoy DA, and Envoy DA XB; Codman Neurovascular, Raynham, MA, USA) were used. We measured the in-the-body length of the catheter and checked the catheter tip location in the carotid artery. We analyzed factors affecting the in-the-body length and stability of the guiding catheter system. Results The average (±standard deviation) in-the-body length of the catheter was 84.2±5.9 cm. The length was significantly longer in men (89.1±5.6 vs. 82.1±4.6 cm, P<0.001), patients older than 65 years (87.7±7.8 vs. 82.7±4.2 cm, P<0.001), patients with a more tortuous arch (arch type 2 and 3) (87.5±7.4 vs. 82.7±4.4 cm, P<0.001), and patients with a distal aneurysm location (distal group) (86.2±5.0 vs. 82.7±6.1 cm, P=0.004). A shift in the tip location was noted in 19 patients (20.4%); there was no significant different among the 3 catheters (P=0.942). Conclusion The minimum required length of a guiding catheter was 84 cm on average for elective anterior-circulation aneurysm embolization. The length increased in men older than 65 years with a more tortuous arch. We could reach a higher position with distal access catheters with little difference in the stability once we reached the target location. PMID:28955511

A Rational Approach to Determine Minimum Strength Thresholds in Novel Structural Materials

NASA Technical Reports Server (NTRS)

Schur, Willi W.; Bilen, Canan; Sterling, Jerry

2003-01-01

Design of safe and survivable structures requires the availability of guaranteed minimum strength thresholds for structural materials to enable a meaningful comparison of strength requirement and available strength. This paper develops a procedure for determining such a threshold with a desired degree of confidence, for structural materials with none or minimal industrial experience. The problem arose in attempting to use a new, highly weight-efficient structural load tendon material to achieve a lightweight super-pressure balloon. The developed procedure applies to lineal (one dimensional) structural elements. One important aspect of the formulation is that it extrapolates to expected probability distributions for long length specimen samples from some hypothesized probability distribution that has been obtained from a shorter length specimen sample. The use of the developed procedure is illustrated using both real and simulated data.

46 CFR 76.10-90 - Installations contracted for prior to May 26, 1965.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Not over Minimum number of pumps Minimum hose and hydrant size, inches Nozzle orifice size, inches Length of hose, feet 100 4,000 2 1 11/2 1 5/8 1 50 4,000 3 1 11/2 1 5/8 1 50 1 May use 50 feet of 21/2-inch hose with 7/8-inch nozzles for exterior stations. May use 75 feet of 11/2-inch hose with 5/8-inch...

Effect of breast milk on hospital costs and length of stay among very low-birth-weight infants in the NICU.

PubMed

Parker, Leslie A; Krueger, Charlene; Sullivan, Sandra; Kelechi, Teresa; Mueller, Martina

2012-08-01

Care of the very low-birth-weight (VLBW) infant is associated with prolonged hospitalization and increased hospital costs. Specific complications of prematurity, including necrotizing enterocolitis (NEC), late-onset sepsis (LOS), and feeding intolerance, contribute to increased cost and length of hospitalization in this population. The provision of breast milk to VLBW infants has been associated with decreased incidence of NEC and LOS as well as fewer days required to achieve full enteral feedings. The purpose of this study was to determine the impact of breast milk on length of hospitalization and hospital costs among VLBW infants in the neonatal intensive care unit (NICU). A total of 80 infants weighing less than 1500 g, born prior to 32 weeks' gestation and who remained in the home hospital until discharge. This descriptive comparative study examined cost of hospitalization and length of stay between 2 groups of VLBW premature infants fed either exclusively formula (n = 40) or at least 50% breast milk (n = 40) during their hospitalization. A retrospective chart review was used to collect information concerning patient demographics, discharge information, and nutritional variables. Information regarding hospital costs was obtained from the hospital's patient accounting office. Independent t tests were used to compare demographic data, length of hospitalization, and cost of care between the 2 groups. No statistically significant differences in length of stay or cost of care were found between infants fed at least 50% breast milk and those who were exclusively formula fed. Descriptive data concerning length of stay and cost of care for VLBW infants and those infants weighing less than 1000 g are presented. This article presents a descriptive comparative study on the effect of providing at least 50% breast milk feedings compared with formula feeding on days to discharge and cost of hospitalization in VLBW infants in the NICU. It also provides information concerning cost of care and length of stay in VLBW and infants weighing less than 1000 g.

s -wave scattering length of a Gaussian potential

NASA Astrophysics Data System (ADS)

Jeszenszki, Peter; Cherny, Alexander Yu.; Brand, Joachim

2018-04-01

We provide accurate expressions for the s -wave scattering length for a Gaussian potential well in one, two, and three spatial dimensions. The Gaussian potential is widely used as a pseudopotential in the theoretical description of ultracold-atomic gases, where the s -wave scattering length is a physically relevant parameter. We first describe a numerical procedure to compute the value of the s -wave scattering length from the parameters of the Gaussian, but find that its accuracy is limited in the vicinity of singularities that result from the formation of new bound states. We then derive simple analytical expressions that capture the correct asymptotic behavior of the s -wave scattering length near the bound states. Expressions that are increasingly accurate in wide parameter regimes are found by a hierarchy of approximations that capture an increasing number of bound states. The small number of numerical coefficients that enter these expressions is determined from accurate numerical calculations. The approximate formulas combine the advantages of the numerical and approximate expressions, yielding an accurate and simple description from the weakly to the strongly interacting limit.

Observers' measurements in premetric electrodynamics: Time and radar length

NASA Astrophysics Data System (ADS)

Gürlebeck, Norman; Pfeifer, Christian

2018-04-01

The description of an observer's measurement in general relativity and the standard model of particle physics is closely related to the spacetime metric. In order to understand and interpret measurements, which test the metric structure of the spacetime, like the classical Michelson-Morley, Ives-Stilwell, Kennedy-Thorndike experiments or frequency comparison experiments in general, it is necessary to describe them in theories, which go beyond the Lorentzian metric structure. However, this requires a description of an observer's measurement without relying on a metric. We provide such a description of an observer's measurement of the fundamental quantities time and length derived from a premetric perturbation of Maxwell's electrodynamics and a discussion on how these measurements influence classical relativistic observables like time dilation and length contraction. Most importantly, we find that the modification of electrodynamics influences the measurements at two instances: the propagation of light is altered as well as the observer's proper time normalization. When interpreting the results of a specific experiment, both effects cannot be disentangled, in general, and have to be taken into account.

42 CFR 456.235 - Description of methods and criteria: Continued stay review dates; length of stay modification.

Code of Federal Regulations, 2010 CFR

2010-10-01

... must describe— (a) The methods and criteria, including norms if used, that the committee uses to assign...) The methods that the committee uses to modify an approved length of stay when the recipient's...

42 CFR 456.134 - Description of methods and criteria: Subsequent continued stay review dates; length of stay...

Code of Federal Regulations, 2010 CFR

2010-10-01

... modification. The UR plan must describe— (a) The methods and criteria, including norms if used, that the... the committee uses to modify an approved length of stay when the recipient's condition or treatment...

Quasi-static responses and variational principles in gradient plasticity

NASA Astrophysics Data System (ADS)

Nguyen, Quoc-Son

2016-12-01

Gradient models have been much discussed in the literature for the study of time-dependent or time-independent processes such as visco-plasticity, plasticity and damage. This paper is devoted to the theory of Standard Gradient Plasticity at small strain. A general and consistent mathematical description available for common time-independent behaviours is presented. Our attention is focussed on the derivation of general results such as the description of the governing equations for the global response and the derivation of related variational principles in terms of the energy and the dissipation potentials. It is shown that the quasi-static response under a loading path is a solution of an evolution variational inequality as in classical plasticity. The rate problem and the rate minimum principle are revisited. A time-discretization by the implicit scheme of the evolution equation leads to the increment problem. An increment of the response associated with a load increment is a solution of a variational inequality and satisfies also a minimum principle if the energy potential is convex. The increment minimum principle deals with stables solutions of the variational inequality. Some numerical methods are discussed in view of the numerical simulation of the quasi-static response.

42 CFR 84.151 - Harness test; minimum requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... concrete floor without disarranging the harness or exerting a pull on the facepiece. (5) The arrangement... manner that prevents a pull equivalent to dragging the maximum length of the hose over a concrete floor...

46 CFR 77.35-5 - General.

Code of Federal Regulations, 2011 CFR

2011-10-01

...-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire ropes shall be either... less than 50 feet in length. The assembled lifeline shall have a minimum breaking strength of 1,500...

46 CFR 77.35-5 - General.

Code of Federal Regulations, 2014 CFR

2014-10-01

...-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire ropes shall be either... less than 50 feet in length. The assembled lifeline shall have a minimum breaking strength of 1,500...

46 CFR 77.35-5 - General.

Code of Federal Regulations, 2012 CFR

2012-10-01

...-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire ropes shall be either... less than 50 feet in length. The assembled lifeline shall have a minimum breaking strength of 1,500...

46 CFR 77.35-5 - General.

Code of Federal Regulations, 2013 CFR

2013-10-01

...-3). (d) All lifelines shall be of steel or bronze wire rope. Steel wire ropes shall be either... less than 50 feet in length. The assembled lifeline shall have a minimum breaking strength of 1,500...

Computing the Length of the Shortest Telomere in the Nucleus

NASA Astrophysics Data System (ADS)

Dao Duc, K.; Holcman, D.

2013-11-01

The telomere length can either be shortened or elongated by an enzyme called telomerase after each cell division. Interestingly, the shortest telomere is involved in controlling the ability of a cell to divide. Yet, its dynamics remains elusive. We present here a stochastic approach where we model this dynamics using a Markov jump process. We solve the forward Fokker-Planck equation to obtain the steady state distribution and the statistical moments of telomere lengths. We focus specifically on the shortest one and we estimate its length difference with the second shortest telomere. After extracting key parameters such as elongation and shortening dynamics from experimental data, we compute the length of telomeres in yeast and obtain as a possible prediction the minimum concentration of telomerase required to ensure a proper cell division.

Computer search for binary cyclic UEP codes of odd length up to 65

NASA Technical Reports Server (NTRS)

Lin, Mao-Chao; Lin, Chi-Chang; Lin, Shu

1990-01-01

Using an exhaustive computation, the unequal error protection capabilities of all binary cyclic codes of odd length up to 65 that have minimum distances at least 3 are found. For those codes that can only have upper bounds on their unequal error protection capabilities computed, an analytic method developed by Dynkin and Togonidze (1976) is used to show that the upper bounds meet the exact unequal error protection capabilities.

Recording 360 Degree Holograms in the Undergraduate Laboratory

ERIC Educational Resources Information Center

Stirn, Bradley A.

1975-01-01

Describes an experiment for recording holograms using a minimum of costly apparatus. Includes a description of apparatus and materials, the procedure for recording the hologram, the processing of the hologram, and the reconstruction of the image. (GS)

Ensemble Weight Enumerators for Protograph LDPC Codes

NASA Technical Reports Server (NTRS)

Divsalar, Dariush

2006-01-01

Recently LDPC codes with projected graph, or protograph structures have been proposed. In this paper, finite length ensemble weight enumerators for LDPC codes with protograph structures are obtained. Asymptotic results are derived as the block size goes to infinity. In particular we are interested in obtaining ensemble average weight enumerators for protograph LDPC codes which have minimum distance that grows linearly with block size. As with irregular ensembles, linear minimum distance property is sensitive to the proportion of degree-2 variable nodes. In this paper the derived results on ensemble weight enumerators show that linear minimum distance condition on degree distribution of unstructured irregular LDPC codes is a sufficient but not a necessary condition for protograph LDPC codes.

Apical root resorption during orthodontic treatment with aligners? A retrospective radiometric study.

PubMed

Krieger, Elena; Drechsler, Thomas; Schmidtmann, Irene; Jacobs, Collin; Haag, Simeon; Wehrbein, Heinrich

2013-08-14

Objective of this study was to investigate the incidence and severity of apical root resorptions (ARR) during orthodontic treatment with aligners. The sample comprised 100 patients (17-75 years of age) with a class I occlusion and anterior crowding before treatment, treated exclusively with aligners (Invisalign®, Align Technologies, Santa Clara, CA, USA). The following teeth were assessed: upper and lower anterior teeth and first molars. Root and crown lengths of a total of 1600 teeth were measured twice in pre- and post-treatment panoramic radiographs. Afterwards, relative changes of the root length during treatment were calculated by a root-crown-ratio taking pre- and post-treatment root and crown lengths into consideration. A reduction of this ratio was considered as a shortening of the initial root length. Additionally, tooth movements of the front teeth were assessed by lateral cephalograms and the 3-dimensonal set up of each patient. All patients had a reduction of the pre-treatment root length with a minimum of two teeth. On average 7.36 teeth per patient were affected. 54% of 1600 measured teeth showed no measurable root reduction. A reduction of >0%-10% of the pre-treatment root length was found in 27.75%, a distinct reduction of >10%-20% in 11.94%. 6.31% of all teeth were affected with a considerable reduction of >20%. We found no statistically significant correlation between relative root length changes and the individual tooth, gender, age or sagittal and vertical orthodontic tooth movement; except for extrusion of upper front teeth, which was considered as not clinical relevant due to the small amount of mean 4% ARR. The present study is the first analyzing ARR in patients with a fully implemented orthodontic treatment with aligners (i.e. resolving anterior crowding). The variety was high and no clinical relevant influence factor could be detected. A minimum of two teeth with a root length reduction was found in every patient. On average, 7.36 teeth per patient were affected.

50 CFR 622.436 - Size limits.

Code of Federal Regulations, 2014 CFR

2014-10-01

... intact. (a) Yellowtail snapper. The minimum size limit for yellowtail snapper is 12 inches (30.5 cm), TL... inches (20.3 cm), fork length. [78 FR 22952, Apr. 17, 2013, as amended at 78 FR 45896, July 30, 2013] ...

50 CFR 622.436 - Size limits.

Code of Federal Regulations, 2013 CFR

2013-10-01

... intact. (a) Yellowtail snapper. The minimum size limit for yellowtail snapper is 12 inches (30.5 cm), TL... inches (20.3 cm), fork length. [78 FR 22952, Apr. 17, 2013, as amended at 78 FR 45896, July 30, 2013] ...

Design of landfill daily cells.

PubMed

Panagiotakopoulos, D; Dokas, I

2001-08-01

The objective of this paper is to study the behaviour of the landfill soil-to-refuse (S/R) ratio when size, geometry and operating parameters of the daily cell vary over realistic ranges. A simple procedure is presented (1) for calculating the cell parameters values which minimise the S/R ratio and (2) for studying the sensitivity of this minimum S/R ratio to variations in cell size, final refuse density, working face length, lift height and cover thickness. In countries where daily soil cover is required, savings in landfill space could be realised following this procedure. The sensitivity of minimum S/R to variations in cell dimensions decreases with cell size. Working face length and lift height affect the S/R ratio significantly. This procedure also offers the engineer an additional tool for comparing one large daily cell with two or more smaller ones, at two different working faces within the same landfill.

The SMM Model as a Boundary Value Problem Using the Discrete Diffusion Equation

NASA Technical Reports Server (NTRS)

Campbell, Joel

2007-01-01

A generalized single step stepwise mutation model (SMM) is developed that takes into account an arbitrary initial state to a certain partial difference equation. This is solved in both the approximate continuum limit and the more exact discrete form. A time evolution model is developed for Y DNA or mtDNA that takes into account the reflective boundary modeling minimum microsatellite length and the original difference equation. A comparison is made between the more widely known continuum Gaussian model and a discrete model, which is based on modified Bessel functions of the first kind. A correction is made to the SMM model for the probability that two individuals are related that takes into account a reflecting boundary modeling minimum microsatellite length. This method is generalized to take into account the general n-step model and exact solutions are found. A new model is proposed for the step distribution.

Using guided ultrasonic wave inspection to quantify the length of delaminations in composite laminates

NASA Astrophysics Data System (ADS)

Feng, Bo; Ribeiro, Artur Lopes; Ramos, Helena Geirinhas

2018-04-01

This paper presents a study of the characteristics of Lamb wave (S0 mode) testing signals in carbon fiber composite laminates containing delaminations. The study was implemented by using commercial finite element simulation software - ANSYS. The delamination signal is proven to be the superposition of the two waves travelling from upper and lower sub-laminates. Dispersion curves for the two sub-laminates were calculated to show the difference between phase velocities of the waves in the sub-laminates. Two models are specifically designed to get the phase difference between the waves that travel in each of the two sub-laminates. From the simulation results, it was found that the phase difference increases with the delamination length. Furthermore, the amplitude of delamination signal decreases first, then it starts to increase after reaching the minimum value. The minimum is reached when the waves from the two sub-laminates are 180° out of phase.

The SMM model as a boundary value problem using the discrete diffusion equation.

PubMed

Campbell, Joel

2007-12-01

A generalized single-step stepwise mutation model (SMM) is developed that takes into account an arbitrary initial state to a certain partial difference equation. This is solved in both the approximate continuum limit and the more exact discrete form. A time evolution model is developed for Y DNA or mtDNA that takes into account the reflective boundary modeling minimum microsatellite length and the original difference equation. A comparison is made between the more widely known continuum Gaussian model and a discrete model, which is based on modified Bessel functions of the first kind. A correction is made to the SMM model for the probability that two individuals are related that takes into account a reflecting boundary modeling minimum microsatellite length. This method is generalized to take into account the general n-step model and exact solutions are found. A new model is proposed for the step distribution.

Determining size and dispersion of minimum viable populations for land management planning and species conservation

NASA Astrophysics Data System (ADS)

Lehmkuhl, John F.

1984-03-01

The concept of minimum populations of wildlife and plants has only recently been discussed in the literature. Population genetics has emerged as a basic underlying criterion for determining minimum population size. This paper presents a genetic framework and procedure for determining minimum viable population size and dispersion strategies in the context of multiple-use land management planning. A procedure is presented for determining minimum population size based on maintenance of genetic heterozygosity and reduction of inbreeding. A minimum effective population size ( N e ) of 50 breeding animals is taken from the literature as the minimum shortterm size to keep inbreeding below 1% per generation. Steps in the procedure adjust N e to account for variance in progeny number, unequal sex ratios, overlapping generations, population fluctuations, and period of habitat/population constraint. The result is an approximate census number that falls within a range of effective population size of 50 500 individuals. This population range defines the time range of short- to long-term population fitness and evolutionary potential. The length of the term is a relative function of the species generation time. Two population dispersion strategies are proposed: core population and dispersed population.

Improved cutback method measuring beat-length for high-birefringence optical fiber by fitting data of photoelectric signal

NASA Astrophysics Data System (ADS)

Shi, Zhi-Dong; Lin, Jian-Qiang; Bao, Huan-Huan; Liu, Shu; Xiang, Xue-Nong

2008-03-01

A photoelectric measurement system for measuring the beat length of birefringence fiber is set up including a set of rotating-wave-plate polarimeter using single photodiode. And two improved cutback methods suitable for measuring beat-length within millimeter range of high birefringence fiber are proposed through data processing technique. The cut length needs not to be restricted shorter than one centimeter so that the auto-cleaving machine is freely used, and no need to carefully operate the manually cleaving blade with low efficiency and poor success. The first method adopts the parameter-fitting to a saw-tooth function of tried beat length by the criterion of minimum square deviations, without special limitation on the cut length. The second method adopts linear-fitting in the divided length ranges, only restrict condition is the increment between different cut lengths less than one beat-length. For a section of holey high-birefringence fiber, we do experiments respectively by the two methods. The detecting error of beat-length is discussed and the advantage is compared.

The Rainbow Spectrum of RNA Secondary Structures.

PubMed

Li, Thomas J X; Reidys, Christian M

2018-06-01

In this paper, we analyze the length spectrum of rainbows in RNA secondary structures. A rainbow in a secondary structure is a maximal arc with respect to the partial order induced by nesting. We show that there is a significant gap in this length spectrum. We shall prove that there asymptotically almost surely exists a unique longest rainbow of length at least [Formula: see text] and that with high probability any other rainbow has finite length. We show that the distribution of the length of the longest rainbow converges to a discrete limit law and that, for finite k, the distribution of rainbows of length k becomes for large n a negative binomial distribution. We then put the results of this paper into context, comparing the analytical results with those observed in RNA minimum free energy structures, biological RNA structures and relate our findings to the sparsification of folding algorithms.

Minimum Information about a Genotyping Experiment (MIGEN)

PubMed Central

Huang, Jie; Mirel, Daniel; Pugh, Elizabeth; Xing, Chao; Robinson, Peter N.; Pertsemlidis, Alexander; Ding, LiangHao; Kozlitina, Julia; Maher, Joseph; Rios, Jonathan; Story, Michael; Marthandan, Nishanth; Scheuermann, Richard H.

2011-01-01

Genotyping experiments are widely used in clinical and basic research laboratories to identify associations between genetic variations and normal/abnormal phenotypes. Genotyping assay techniques vary from single genomic regions that are interrogated using PCR reactions to high throughput assays examining genome-wide sequence and structural variation. The resulting genotype data may include millions of markers of thousands of individuals, requiring various statistical, modeling or other data analysis methodologies to interpret the results. To date, there are no standards for reporting genotyping experiments. Here we present the Minimum Information about a Genotyping Experiment (MIGen) standard, defining the minimum information required for reporting genotyping experiments. MIGen standard covers experimental design, subject description, genotyping procedure, quality control and data analysis. MIGen is a registered project under MIBBI (Minimum Information for Biological and Biomedical Investigations) and is being developed by an interdisciplinary group of experts in basic biomedical science, clinical science, biostatistics and bioinformatics. To accommodate the wide variety of techniques and methodologies applied in current and future genotyping experiment, MIGen leverages foundational concepts from the Ontology for Biomedical Investigations (OBI) for the description of the various types of planned processes and implements a hierarchical document structure. The adoption of MIGen by the research community will facilitate consistent genotyping data interpretation and independent data validation. MIGen can also serve as a framework for the development of data models for capturing and storing genotyping results and experiment metadata in a structured way, to facilitate the exchange of metadata. PMID:22180825

Environmental Horticulture Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide contains the standard environmental horticulture curriculum for technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the environmental horticulture field. The general information section contains the following: purpose and objectives; program description,…

Diffusion on an Ising chain with kinks

NASA Astrophysics Data System (ADS)

Hamma, Alioscia; Mansour, Toufik; Severini, Simone

2009-07-01

We count the number of histories between the two degenerate minimum energy configurations of the Ising model on a chain, as a function of the length n and the number d of kinks that appear above the critical temperature. This is equivalent to count permutations of length n avoiding certain subsequences depending on d. We give explicit generating functions and compute the asymptotics. The setting considered has a role when describing dynamics induced by quantum Hamiltonians with deconfined quasi-particles.

49 CFR 393.110 - What else do I have to do to determine the minimum number of tiedowns?

Code of Federal Regulations, 2011 CFR

2011-10-01

... articles 5 feet (1.52 meters) or less in length, and 1,100 pounds (500 kg) or less in weight; (2) Two tiedowns if the article is: (i) 5 feet (1.52 meters) or less in length and more than 1,100 pounds (500 kg) in weight; or (ii) Longer than 5 feet (1.52 meters) but less than or equal to 10 feet (3.04 meters...

The effect of catalyst length and downstream reactor distance on catalytic combustor performance

NASA Technical Reports Server (NTRS)

Anderson, D.

1980-01-01

A study was made to determine the effects on catalytic combustor performance which resulted from independently varying the length of a catalytic reactor and the length available for gas-phase reactions downstream of the catalyst. Monolithic combustion catalysts from three manufacturers were tested in a combustion test rig with no. 2 diesel fuel. Catalytic reactor lengths of 2.5 and 5.4 cm, and downstream gas-phase reaction distances of 7.3, 12.4, 17.5, and 22.5 cm were evaluated. Measurements of carbon monoxide, unburned hydrocarbons, nitrogen oxides, and pressure drop were made. The catalytic-reactor pressure drop was less than 1 percent of the upstream total pressure for all test configurations and test conditions. Nitrogen oxides and unburned hydrocarbons emissions were less than 0.25 g NO2/kg fuel and 0.6 g HC/kg fuel, respectively. The minimum operating temperature (defined as the adiabatic combustion temperature required to obtain carbon monoxide emissions below a reference level of 13.6 g CO/kg fuel) ranged from 1230 K to 1500 K for the various conditions and configurations tested. The minimum operating temperature decreased with increasing total (catalytic-reactor-plus-downstream-gas-phase-reactor-zone) residence time but was independent of the relative times spent in each region when the catalytic-reactor residence time was greater than or equal to 1.4 ms.

Compact and high resolution virtual mouse using lens array and light sensor

NASA Astrophysics Data System (ADS)

Qin, Zong; Chang, Yu-Cheng; Su, Yu-Jie; Huang, Yi-Pai; Shieh, Han-Ping David

2016-06-01

Virtual mouse based on IR source, lens array and light sensor was designed and implemented. Optical architecture including lens amount, lens pitch, baseline length, sensor length, lens-sensor gap, focal length etc. was carefully designed to achieve low detective error, high resolution, and simultaneously, compact system volume. System volume is 3.1mm (thickness) × 4.5mm (length) × 2, which is much smaller than that of camera-based device. Relative detective error of 0.41mm and minimum resolution of 26ppi were verified in experiments, so that it can replace conventional touchpad/touchscreen. If system thickness is eased to 20mm, resolution higher than 200ppi can be achieved to replace real mouse.

The engineering of construction specifications for externally bonded FRP composites

NASA Astrophysics Data System (ADS)

Yang, Xinbao

This dissertation, consisting of six technical papers, presents the results of research on the theme of developing engineering and the construction specifications for externally bonded FRP composites. For particular, the work focuses on three critical aspects of the performance of FRP systems: fiber misalignment, corner radius, and lap splice length. Based on both experimental and theoretical investigations, the main contribution of this work is the development of recommendations on fiber misalignment limit, minimum corner radius, lap splice length to be used as guidance in the construction practice of FRP strengthening of concrete structures. The first three papers focus on the strength and stiffness degradation of CFRP laminates from fiber misalignment. It was concluded that misalignment affects strength more than stiffness. In practice, when all fibers in a laminate can be regarded as through fibers, it is recommended to use a reduction factor for strength and no reduction factor for stiffness to account for fiber misalignment. Findings from concrete beams strengthened with misaligned CFRP laminates verified these recommendations. The fourth and fifth papers investigate the effect of corner radius on the mechanical properties of CFRP laminates wrapped around a rectangular cross section. A unique reusable test device was fabricated to determine fiber stress and radial stress of CFRP laminates with different corner radii. Comparison performed with finite element analyses shows that the test method and the reusable device were viable and the stress concentration needs to be considered in FRP laminate wrapped corners. A minimum of 1.0 in. corner radius was recommended for practice. The sixth paper summarizes the research on the lap splice length of FRP laminates under static and repeated loads. Although a lap splice length of 1.5 in. is sufficient for CFRP laminates to develop the ultimate static tensile strength, a minimum of 4.0 in. is recommended in order to account for repeated loads.

Redescription of eutogenes vicinus summers and price, a predatory polymorphic, cheyletid mite with descriptions of males and immature stages (Acarina: Cheyletidae)

Treesearch

Robert L. Smiley; John C. Moser

1975-01-01

Eutogenes vicinus Summer and Price is redescribed. Illustrations and descriptions are presented for the first time of the male and immature stages of this polymorphic species. Variation in length of palpi of the heteromorphic males is discussed.

50 CFR 216.175 - Requirements for monitoring and reporting.

Code of Federal Regulations, 2011 CFR

2011-10-01

...., FFG, DDG, or CG). (G) Length of time observers maintained visual contact with marine mammal. (H) Wave... height in feet (high, low and average during exercise). (I) Narrative description of sensors and... sensor. (F) Length of time observers maintained visual contact with marine mammal. (G) Wave height. (H...

50 CFR 216.275 - Requirements for monitoring and reporting.

Code of Federal Regulations, 2011 CFR

2011-10-01

..., what type of surface vessel, i.e., FFG, DDG, or CG) (G) Length of time observers maintained visual... exercise) (I) Narrative description of sensors and platforms utilized for marine mammal detection and... calves were observed (E) Initial detection sensor (F) Length of time observers maintained visual contact...

A descriptive analysis of midwifery education, regulation and association in 73 countries: the baseline for a post-2015 pathway.

PubMed

Castro Lopes, Sofia; Nove, Andrea; Ten Hoope-Bender, Petra; de Bernis, Luc; Bokosi, Martha; Moyo, Nester T; Homer, Caroline S E

2016-06-08

Education, regulation and association (ERA) are the supporting pillars of an enabling environment for midwives to provide quality care. This study explores these three pillars in the 73 low- and middle-income countries who participated in the State of the World's Midwifery (SoWMy) 2014 report. It also examines the progress made since the previous report in 2011. A self-completion questionnaire collected quantitative and qualitative data on ERA characteristics and organisation in the 73 countries. The countries were grouped according to World Health Organization (WHO) regions. A descriptive analysis was conducted. In 82% of the participating countries, the minimum education level requirement to start midwifery training was grade 12 or above. The average length of training was higher for direct-entry programmes at 3.1 years than for post-nursing/healthcare provider programmes at 1.9 years. The median number of supervised births that must be conducted before graduation was 33 (range 0 to 240). Fewer than half of the countries had legislation recognising midwifery as an independent profession. This legislation was particularly lacking in the Western Pacific and South-East Asia regions. In most (90%) of the participating countries, governments were reported to have a regulatory role, but some reported challenges to the role being performed effectively. Professional associations were widely available to midwives in all regions although not all were exclusive to midwives. Compared with the 2011 SoWMy report, there is evidence of increasing effort in low- and middle-income countries to improve midwifery education, to strengthen the profession and to follow international ERA standards and guidelines. However, not all elements are being implemented equally; some variability persists between and within regions. The education pillar showed more systematic improvement in the type of programme and length of training. The reinforcement of regulation through the development of legislation for midwifery, a recognised definition and the strengthening of midwives' associations would benefit the development of other ERA elements and the profession generally.

A phenomenological description of space-time noise in quantum gravity.

PubMed

Amelino-Camelia, G

2001-04-26

Space-time 'foam' is a geometric picture of the smallest size scales in the Universe, which is characterized mainly by the presence of quantum uncertainties in the measurement of distances. All quantum-gravity theories should predict some kind of foam, but the description of the properties of this foam varies according to the theory, thereby providing a possible means of distinguishing between such theories. I previously showed that foam-induced distance fluctuations would introduce a new source of noise to the measurements of gravity-wave interferometers, but the theories are insufficiently developed to permit detailed predictions that would be of use to experimentalists. Here I propose a phenomenological approach that directly describes space-time foam, and which leads naturally to a picture of distance fluctuations that is independent of the details of the interferometer. The only unknown in the model is the length scale that sets the overall magnitude of the effect, but recent data already rule out the possibility that this length scale could be identified with the 'string length' (10-34 m < Ls < 10-33 m). Length scales even smaller than the 'Planck length' (LP approximately 10-35 m) will soon be probed experimentally.

30 CFR 780.38 - Support facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS SURFACE MINING PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR RECLAMATION AND OPERATION PLAN § 780.38... description, plans, and drawings for each support facility to be constructed, used, or maintained within the...

30 CFR 784.30 - Support facilities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS UNDERGROUND MINING PERMIT APPLICATIONS-MINIMUM REQUIREMENTS FOR RECLAMATION AND OPERATION PLAN § 784.30... description, plans, and drawings for each support facility to be constructed, used, or maintained within the...

A Computer Analysis of Library Postcards. (CALP)

ERIC Educational Resources Information Center

Stevens, Norman D.

1974-01-01

A description of a sophisticated application of computer techniques to the analysis of a collection of picture postcards of library buildings in an attempt to establish the minimum architectural requirements needed to distinguish one style of library building from another. (Author)

Masonry Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This masonry program guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a masonry program. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification;…

Roton Minimum as a Fingerprint of Magnon-Higgs Scattering in Ordered Quantum Antiferromagnets.

PubMed

Powalski, M; Uhrig, G S; Schmidt, K P

2015-11-13

A quantitative description of magnons in long-range ordered quantum antiferromagnets is presented which is consistent from low to high energies. It is illustrated for the generic S=1/2 Heisenberg model on the square lattice. The approach is based on a continuous similarity transformation in momentum space using the scaling dimension as the truncation criterion. Evidence is found for significant magnon-magnon attraction inducing a Higgs resonance. The high-energy roton minimum in the magnon dispersion appears to be induced by strong magnon-Higgs scattering.

Total hip arthroplasty performed in patients with residual poliomyelitis: does it work?

PubMed

Yoon, Byung-Ho; Lee, Young-Kyun; Yoo, Jeong Joon; Kim, Hee Joong; Koo, Kyung-Hoi

2014-03-01

Patients with residual poliomyelitis can have advanced degenerative arthritis of the hip in the paralytic limb or the nonparalytic contralateral limb. Although THA is a treatment option for some of these patients, there are few studies regarding THA in this patient population. We therefore reviewed a group of patients with residual poliomyelitis who underwent cementless THA on either their paralytic limb or nonparalytic limb to assess (1) Harris hip scores, (2) radiographic results, including implant loosening, (3) complications, including dislocation, and (4) limb length discrepancy after recovery from surgery. From January 2000 to December 2009, 10 patients with residual poliomyelitis (10 hips, four paralytic limbs and six nonparalytic contralateral limbs) underwent THA using cementless prostheses. Harris hip scores, complications, and leg length discrepancy were determined by chart review, and confirmed by questionnaire and examination; radiographs were reviewed by two observers for this study. Followup was available for all 10 patients at a minimum of 3 years (median, 7 years; range, 3.4-13 years). Surgery was done at the same side of the paralytic limb in four hips and contralateral to the paralytic limb in six. All patients had pain relief and improvement in function; the Harris hip score improved from mean of 68 preoperatively to 92 at last followup (p = 0.043). However, only three patients had complete pain relief. One hip dislocated, which was treated successfully with closed reduction and a hip spica cast for 2 months. There was no loosening or osteolysis in this series. Leg length discrepancy improved after the index operation, but only in the THAs performed in the paralytic limbs. Cementless THA may be suitable for painful hips in adult patients with residual poliomyelitis. Nonetheless, these patients should be informed of the possibility of mild residual pain and persistent leg length discrepancy, particularly patients whose THA is performed on the limb that was not affected by polio (ie, the nonparalytic contralateral limb). Level IV, therapeutic study. See the Instructions for Authors for a complete description of levels of evidence.

A study of root canal morphology of human primary incisors and molars using cone beam computerized tomography: an in vitro study.

PubMed

Gaurav, Vivek; Srivastava, Nikhil; Rana, Vivek; Adlakha, Vivek Kumar

2013-01-01

Variations in morphology of root canals in primary teeth usually leads to complications during and after endodontic therapy. To improve the success in endodontics, a thorough knowledge of the root canal morphology is essential. The aim of this study was to assess the variation in number and morphology of the root canals of primary incisors and molars and to study the applicability of cone beam computerized tomography (CBCT) in assessing the same. A total of 60 primary molars and incisors with full root length were collected and various parameters such as the number of roots, number of canals, diameter of root canal at cementoenamel junction and middle-third, length and angulations of roots of primary molars and incisors were studied using CBCT. The observations were put to descriptive statistics to find out the frequency, mean, standard deviation and range for all four subgroups. Further, unpaired t-test was used to compare these parameters between subgroups and analysis of variance test was implemented to evaluate the parameters within the subgroups. The CBCT showed the presence of bifurcation of root canal at middle third in 13% of mandibular incisors while 20% of mandibular molars had two canals in distal root. The diameter of distobuccal root canal of maxillary molars and mesiolingual canal of mandibular molars was found to be minimum. CBCT is a relatively new and effective technology, which provides an auxiliary imaging modality to supplement conventional radiography for assessing the variation in root canal morphology of primary teeth.

Segmentation of tumor ultrasound image in HIFU therapy based on texture and boundary encoding

NASA Astrophysics Data System (ADS)

Zhang, Dong; Xu, Menglong; Quan, Long; Yang, Yan; Qin, Qianqing; Zhu, Wenbin

2015-02-01

It is crucial in high intensity focused ultrasound (HIFU) therapy to detect the tumor precisely with less manual intervention for enhancing the therapy efficiency. Ultrasound image segmentation becomes a difficult task due to signal attenuation, speckle effect and shadows. This paper presents an unsupervised approach based on texture and boundary encoding customized for ultrasound image segmentation in HIFU therapy. The approach oversegments the ultrasound image into some small regions, which are merged by using the principle of minimum description length (MDL) afterwards. Small regions belonging to the same tumor are clustered as they preserve similar texture features. The mergence is completed by obtaining the shortest coding length from encoding textures and boundaries of these regions in the clustering process. The tumor region is finally selected from merged regions by a proposed algorithm without manual interaction. The performance of the method is tested on 50 uterine fibroid ultrasound images from HIFU guiding transducers. The segmentations are compared with manual delineations to verify its feasibility. The quantitative evaluation with HIFU images shows that the mean true positive of the approach is 93.53%, the mean false positive is 4.06%, the mean similarity is 89.92%, the mean norm Hausdorff distance is 3.62% and the mean norm maximum average distance is 0.57%. The experiments validate that the proposed method can achieve favorable segmentation without manual initialization and effectively handle the poor quality of the ultrasound guidance image in HIFU therapy, which indicates that the approach is applicable in HIFU therapy.

Concrete Cutting Refinement for Crater Repair

DTIC Science & Technology

2015-08-01

Identification of damage sustained to the airfield operating surfaces, 2. Selection of minimum pavement surface areas required to support air- craft...also studied to identify the appropriate lineup and stop locations to achieve the desired overcut lengths. Edwards et al. (2015) recommends overcut

Are 10-, 10-12-, or > 12-mm prostate biopsy core quality control cutoffs reasonable?

PubMed

Sanches, Brunno C F; Lalli, Ana Luiza; Azal Neto, Wilmar; Billis, Athanase; Reis, Leonardo Oliveira

2018-07-01

To explore the role of prostate biopsy core length on prediction of index tumor clinical significance and localization on radical prostatectomy (RP) and time to recurrence, hypothesizing 10-, 10-12-, or > 12-mm minimum core as potential biopsy quality control. Assessed 2424 prostate biopsy cores and corresponding RP of 202 patients submitted to the first set of 12 cores prostate biopsy between 2010 and 2015. Analyzed biopsy core length, age, prostate volume (PV), free and total PSA ratio, PSA density, RP index tumor clinical significance, extension, localization, surgical margins, and cancer control. Prostate biopsy confronted to surgical specimens defined Gleason grade-grouping system (1-5) agreement. Median age was 63.7 years, PSA 10.1 ng/dl, PSA density 28%, and mean follow-up 5 years. Recurrence was identified in 64 (31.7%) patients and predicted by PSA > 10 at time of diagnosis (p = 0.008), seminal vesicle invasion (p = 0.0019), core tumor percentage (p = 0.033), and tumor localization predominantly in the prostate base (p = 0017). The mean core length was longer in index tumor positive cores (p = 0.043) and in tumors classified as clinically insignificant (p = 0.011), without impact on tumor localization (basal vs apical p = 0.592; left vs. right p = 0.320). Biopsy core length categories (≤ 10, 10-12 and > 12 mm) did not significantly impact Gleason grade-grouping agreement or time to recurrence (p > 0.05). Core length was not significantly different in all Gleason grade-groupings 1-5 (p = 0.312). Prostate biopsy core length impacts tumor characterization; however, 10 mm minimum core length and even 10-12- and > 12-mm categories failed as a biopsy quality control in our data.

The effect of macromolecular crowding on mobility of biomolecules, association kinetics and gene expression in living cells

NASA Astrophysics Data System (ADS)

Tabaka, Marcin; Kalwarczyk, Tomasz; Szymanski, Jedrzej; Hou, Sen; Hołyst, Robert

2014-09-01

We discuss a quantitative influence of macromolecular crowding on biological processes: motion, bimolecular reactions, and gene expression in prokaryotic and eukaryotic cells. We present scaling laws relating diffusion coefficient of an object moving in a cytoplasm of cells to a size of this object and degree of crowding. Such description leads to the notion of the length scale dependent viscosity characteristic for all living cells. We present an application of the length-scale dependent viscosity model to the description of motion in the cytoplasm of both eukaryotic and prokaryotic living cells. We compare the model with all recent data on diffusion of nanoscopic objects in HeLa, and E. coli cells. Additionally a description of the mobility of molecules in cell nucleus is presented. Finally we discuss the influence of crowding on the bimolecular association rates and gene expression in living cells.

Software For Computer-Security Audits

NASA Technical Reports Server (NTRS)

Arndt, Kate; Lonsford, Emily

1994-01-01

Information relevant to potential breaches of security gathered efficiently. Automated Auditing Tools for VAX/VMS program includes following automated software tools performing noted tasks: Privileged ID Identification, program identifies users and their privileges to circumvent existing computer security measures; Critical File Protection, critical files not properly protected identified; Inactive ID Identification, identifications of users no longer in use found; Password Lifetime Review, maximum lifetimes of passwords of all identifications determined; and Password Length Review, minimum allowed length of passwords of all identifications determined. Written in DEC VAX DCL language.

A heuristic for suffix solutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bilgory, A.; Gajski, D.D.

1986-01-01

The suffix problem has appeared in solutions of recurrence systems for parallel and pipelined machines and more recently in the design of gate and silicon compilers. In this paper the authors present two algorithms. The first algorithm generates parallel suffix solutions with minimum cost for a given length, time delay, availability of initial values, and fanout. This algorithm generates a minimal solution for any length n and depth range log/sub 2/ N to N. The second algorithm reduces the size of the solutions generated by the first algorithm.

Evidence accumulation in decision making: unifying the "take the best" and the "rational" models.

PubMed

Lee, Michael D; Cummins, Tarrant D R

2004-04-01

An evidence accumulation model of forced-choice decision making is proposed to unify the fast and frugal take the best (TTB) model and the alternative rational (RAT) model with which it is usually contrasted. The basic idea is to treat the TTB model as a sequential-sampling process that terminates as soon as any evidence in favor of a decision is found and the rational approach as a sequential-sampling process that terminates only when all available information has been assessed. The unified TTB and RAT models were tested in an experiment in which participants learned to make correct judgments for a set of real-world stimuli on the basis of feedback, and were then asked to make additional judgments without feedback for cases in which the TTB and the rational models made different predictions. The results show that, in both experiments, there was strong intraparticipant consistency in the use of either the TTB or the rational model but large interparticipant differences in which model was used. The unified model is shown to be able to capture the differences in decision making across participants in an interpretable way and is preferred by the minimum description length model selection criterion.

Reservoir water level forecasting using group method of data handling

NASA Astrophysics Data System (ADS)

Zaji, Amir Hossein; Bonakdari, Hossein; Gharabaghi, Bahram

2018-06-01

Accurately forecasted reservoir water level is among the most vital data for efficient reservoir structure design and management. In this study, the group method of data handling is combined with the minimum description length method to develop a very practical and functional model for predicting reservoir water levels. The models' performance is evaluated using two groups of input combinations based on recent days and recent weeks. Four different input combinations are considered in total. The data collected from Chahnimeh#1 Reservoir in eastern Iran are used for model training and validation. To assess the models' applicability in practical situations, the models are made to predict a non-observed dataset for the nearby Chahnimeh#4 Reservoir. According to the results, input combinations (L, L -1) and (L, L -1, L -12) for recent days with root-mean-squared error (RMSE) of 0.3478 and 0.3767, respectively, outperform input combinations (L, L -7) and (L, L -7, L -14) for recent weeks with RMSE of 0.3866 and 0.4378, respectively, with the dataset from https://www.typingclub.com/st. Accordingly, (L, L -1) is selected as the best input combination for making 7-day ahead predictions of reservoir water levels.

On the Complexity of Item Response Theory Models.

PubMed

Bonifay, Wes; Cai, Li

2017-01-01

Complexity in item response theory (IRT) has traditionally been quantified by simply counting the number of freely estimated parameters in the model. However, complexity is also contingent upon the functional form of the model. We examined four popular IRT models-exploratory factor analytic, bifactor, DINA, and DINO-with different functional forms but the same number of free parameters. In comparison, a simpler (unidimensional 3PL) model was specified such that it had 1 more parameter than the previous models. All models were then evaluated according to the minimum description length principle. Specifically, each model was fit to 1,000 data sets that were randomly and uniformly sampled from the complete data space and then assessed using global and item-level fit and diagnostic measures. The findings revealed that the factor analytic and bifactor models possess a strong tendency to fit any possible data. The unidimensional 3PL model displayed minimal fitting propensity, despite the fact that it included an additional free parameter. The DINA and DINO models did not demonstrate a proclivity to fit any possible data, but they did fit well to distinct data patterns. Applied researchers and psychometricians should therefore consider functional form-and not goodness-of-fit alone-when selecting an IRT model.

Statistical modeling, detection, and segmentation of stains in digitized fabric images

NASA Astrophysics Data System (ADS)

Gururajan, Arunkumar; Sari-Sarraf, Hamed; Hequet, Eric F.

2007-02-01

This paper will describe a novel and automated system based on a computer vision approach, for objective evaluation of stain release on cotton fabrics. Digitized color images of the stained fabrics are obtained, and the pixel values in the color and intensity planes of these images are probabilistically modeled as a Gaussian Mixture Model (GMM). Stain detection is posed as a decision theoretic problem, where the null hypothesis corresponds to absence of a stain. The null hypothesis and the alternate hypothesis mathematically translate into a first order GMM and a second order GMM respectively. The parameters of the GMM are estimated using a modified Expectation-Maximization (EM) algorithm. Minimum Description Length (MDL) is then used as the test statistic to decide the verity of the null hypothesis. The stain is then segmented by a decision rule based on the probability map generated by the EM algorithm. The proposed approach was tested on a dataset of 48 fabric images soiled with stains of ketchup, corn oil, mustard, ragu sauce, revlon makeup and grape juice. The decision theoretic part of the algorithm produced a correct detection rate (true positive) of 93% and a false alarm rate of 5% on these set of images.

Power prediction in mobile communication systems using an optimal neural-network structure.

PubMed

Gao, X M; Gao, X Z; Tanskanen, J A; Ovaska, S J

1997-01-01

Presents a novel neural-network-based predictor for received power level prediction in direct sequence code division multiple access (DS/CDMA) systems. The predictor consists of an adaptive linear element (Adaline) followed by a multilayer perceptron (MLP). An important but difficult problem in designing such a cascade predictor is to determine the complexity of the networks. We solve this problem by using the predictive minimum description length (PMDL) principle to select the optimal numbers of input and hidden nodes. This approach results in a predictor with both good noise attenuation and excellent generalization capability. The optimized neural networks are used for predictive filtering of very noisy Rayleigh fading signals with 1.8 GHz carrier frequency. Our results show that the optimal neural predictor can provide smoothed in-phase and quadrature signals with signal-to-noise ratio (SNR) gains of about 12 and 7 dB at the urban mobile speeds of 5 and 50 km/h, respectively. The corresponding power signal SNR gains are about 11 and 5 dB. Therefore, the neural predictor is well suitable for power control applications where ldquodelaylessrdquo noise attenuation and efficient reduction of fast fading are required.

Effects of ageing and Alzheimer disease on haemodynamic response function: a challenge for event-related fMRI.

PubMed

Asemani, Davud; Morsheddost, Hassan; Shalchy, Mahsa Alizadeh

2017-06-01

Functional magnetic resonance imaging (fMRI) can generate brain images that show neuronal activity due to sensory, cognitive or motor tasks. Haemodynamic response function (HRF) may be considered as a biomarker to discriminate the Alzheimer disease (AD) from healthy ageing. As blood-oxygenation-level-dependent fMRI signal is much weak and noisy, particularly for the elderly subjects, a robust method is necessary for HRF estimation to efficiently differentiate the AD. After applying minimum description length wavelet as an extra denoising step, deconvolution algorithm is here employed for HRF estimation, substituting the averaging method used in the previous works. The HRF amplitude peaks are compared for three groups HRF of young, non-demented and demented elderly groups for both vision and motor regions. Prior works often reported significant differences in the HRF peak amplitude between the young and the elderly. The authors' experimentations show that the HRF peaks are not significantly different comparing the young adults with the elderly (either demented or non-demented). It is here demonstrated that the contradictory findings of the previous studies on the HRF peaks for the elderly compared with the young are originated from the noise contribution in fMRI data.

Exploiting multiple sources of information in learning an artificial language: human data and modeling.

PubMed

Perruchet, Pierre; Tillmann, Barbara

2010-03-01

This study investigates the joint influences of three factors on the discovery of new word-like units in a continuous artificial speech stream: the statistical structure of the ongoing input, the initial word-likeness of parts of the speech flow, and the contextual information provided by the earlier emergence of other word-like units. Results of an experiment conducted with adult participants show that these sources of information have strong and interactive influences on word discovery. The authors then examine the ability of different models of word segmentation to account for these results. PARSER (Perruchet & Vinter, 1998) is compared to the view that word segmentation relies on the exploitation of transitional probabilities between successive syllables, and with the models based on the Minimum Description Length principle, such as INCDROP. The authors submit arguments suggesting that PARSER has the advantage of accounting for the whole pattern of data without ad-hoc modifications, while relying exclusively on general-purpose learning principles. This study strengthens the growing notion that nonspecific cognitive processes, mainly based on associative learning and memory principles, are able to account for a larger part of early language acquisition than previously assumed. Copyright © 2009 Cognitive Science Society, Inc.

Automated Image Analysis of Lung Branching Morphogenesis from Microscopic Images of Fetal Rat Explants

PubMed Central

Rodrigues, Pedro L.; Rodrigues, Nuno F.; Duque, Duarte; Granja, Sara; Correia-Pinto, Jorge; Vilaça, João L.

2014-01-01

Background. Regulating mechanisms of branching morphogenesis of fetal lung rat explants have been an essential tool for molecular research. This work presents a new methodology to accurately quantify the epithelial, outer contour, and peripheral airway buds of lung explants during cellular development from microscopic images. Methods. The outer contour was defined using an adaptive and multiscale threshold algorithm whose level was automatically calculated based on an entropy maximization criterion. The inner lung epithelium was defined by a clustering procedure that groups small image regions according to the minimum description length principle and local statistical properties. Finally, the number of peripheral buds was counted as the skeleton branched ends from a skeletonized image of the lung inner epithelia. Results. The time for lung branching morphometric analysis was reduced in 98% in contrast to the manual method. Best results were obtained in the first two days of cellular development, with lesser standard deviations. Nonsignificant differences were found between the automatic and manual results in all culture days. Conclusions. The proposed method introduces a series of advantages related to its intuitive use and accuracy, making the technique suitable to images with different lighting characteristics and allowing a reliable comparison between different researchers. PMID:25250057

Sonographic Assessment of the Normal Dimensions of Liver, Spleen, and Kidney in Healthy Children at Tertiary Care Hospital.

PubMed

Thapa, N B; Shah, S; Pradhan, A; Rijal, K; Pradhan, A; Basnet, S

2015-01-01

Background Ultrasonography is one of the most common imaging modality to measure dimensions of visceral organs in children. However, the normal limit of size of visceral organs according to age and body habitus has not been specified in the standard textbooks. This might result in under detection of organomegaly in pediatrics population. Objective The objective of this study was to determine the normal range of dimensions for the liver, spleen, and kidney in healthy children. Method This is prospective cross-sectional, hospital-based study done at Tertiary-care teaching hospital. Participants included 272 pediatric subjects (152 male and 120 female) with normal physical or sonographic findings who were examined because of problems unrelated to the measured organs. The subjects were one month to 15 year (180 months) old. All measured organs were sonographically normal. Relationships of the dimensions of these organs with sex, age, body weight and height were investigated. Limits of normal dimensions of these organs were defined. Result Normal length of liver, kidneys and spleen were obtained sonographically for 272 children (152 male [55.9%] and 120 female [44.1%]) in the age group from 1 months to 15 (180 months) years. The mean age was 45.78 months (SD, 44.73). The measured dimensions of all these organs showed highest correlation with height and age so the descriptive analysis of the organ dimensions (mean, minimum, and maximum values, SD and 5th and 95th percentiles) were expressed in 10 age groups along with height range of the included children. The mean length of right kidney was shorter than the left kidney length, and the difference was statistically significant (p = 0.001). Conclusion This study provides practical and comprehensive guide to the normal visceral organ dimension in pediatric population. The normal range limit of the liver, spleen, and kidney determined in this study could be used as a reference in daily practice in local radiology clinics.

23 CFR 645.213 - Use and occupancy agreements (permits).

Code of Federal Regulations, 2010 CFR

2010-04-01

... 645.213 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC..., as a minimum, describe the requirements for location, construction, protection of traffic... description of the size, type, nature, and extent of the utility facilities being located within the highway...

23 CFR 645.213 - Use and occupancy agreements (permits).

Code of Federal Regulations, 2011 CFR

2011-04-01

... 645.213 Highways FEDERAL HIGHWAY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION ENGINEERING AND TRAFFIC..., as a minimum, describe the requirements for location, construction, protection of traffic... description of the size, type, nature, and extent of the utility facilities being located within the highway...

50 CFR 648.127 - Framework adjustments to management measures.

Code of Federal Regulations, 2010 CFR

2010-10-01

..., FMP Monitoring Committee composition and process, description and identification of essential fish... additions to management measures must come from one or more of the following categories: Minimum fish size, maximum fish size, gear restrictions, gear restricted areas, gear requirements or prohibitions, permitting...

Using the Wilderness to Facilitate Adjustment to College: An Updated Description of Wilderness Orientation Programs.

ERIC Educational Resources Information Center

Davis-Berman, Jennifer; Berman, Dene

1996-01-01

Updated description of 38 wilderness orientation programs currently affiliated with U.S. colleges and universities includes program enrollment, length, cost, types of leaders, training, and sponsorship. Discusses program philosophies, goals, reasons for using the wilderness, and critical and emerging issues. Compares data to previous research.…

[Road traffic injuries in Catalonia (Spain): an approach using the minimum data set for acute-care hospitals and emergency resources].

PubMed

Clèries, Montse; Bosch, Anna; Vela, Emili; Bustins, Montse

2015-09-01

To verify the usefulness of the minimum data set (MDS) for acute-care hospitals and emergency resources for the study of road traffic injuries and to describe the use of health resources in Catalonia (Spain). The study population consisted of patients treated in any kind of emergency service and patients admitted for acute hospitalization in Catalonia in 2013. A descriptive analysis was performed by age, gender, time and clinical variables. A total of 48,150 patients were treated in hospital emergency departments, 6,210 were attended in primary care, and 4,912 were admitted to hospital. There was a higher proportion of men (56.2%), mainly aged between 20 and 40 years. Men accounted for 54.9% of patients with minor injuries and 75.1% of those with severe injuries. Contusions are the most common injury (30.2%), followed by sprains (28.7%). Fractures mostly affected persons older than 64 years, internal injuries particularly affected men older than 64 years, and wounds mainly affected persons younger than 18 years and older than 64 years. In the adult population, the severity of the injuries increased with age, leading to longer length of stay and greater complexity. Hospital mortality was 0.2%. Fractures, internal injuries and wounds were more frequent in the group of very serious injuries, and sprains and contusions in the group of minor injuries. MDS records (acute hospitals and emergency resources) provide information that is complementary to other sources of information on traffic accidents, increasing the completeness of the data. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

Experimental investigation of the effect of insulator sleeve length on the time to pinch and multipinch formation in the plasma focus facility

NASA Astrophysics Data System (ADS)

Momenei, M.; Khodabakhshei, Z.; Panahi, N.; Mohammadi, M. A.

2017-03-01

The length of insulator sleeve is varied to investigate its effect on the pinch formation in the plasma focus facility. In this paper, the effect of insulator length on the time to pinch at various pressures and working voltages in the 1.15 kJ Mather type plasma focus is investigated. The results show that with 4.5 cm insulator length the time to pinch at all pressures is minimum. Other results also confirm that with increasing of pressure the time to pinch is increased. Moreover, with increasing working voltage the time to pinch is decreased. Pictures, captured using a digital single lens reflex (DSLR) Canon EOS 7D system, show that multipinch phenomenon is formed.

47 CFR 73.186 - Establishment of effective field at one kilometer.

Code of Federal Regulations, 2013 CFR

2013-10-01

... radiation (not less than one wave length or 5 times the vertical height in the case of a single element, i.e... lieu of the required minimum physical heights of the antennas proper. Also, in other situations, it may...

47 CFR 73.186 - Establishment of effective field at one kilometer.

Code of Federal Regulations, 2014 CFR

2014-10-01

... radiation (not less than one wave length or 5 times the vertical height in the case of a single element, i.e... lieu of the required minimum physical heights of the antennas proper. Also, in other situations, it may...

47 CFR 73.186 - Establishment of effective field at one kilometer.

Code of Federal Regulations, 2012 CFR

2012-10-01

... radiation (not less than one wave length or 5 times the vertical height in the case of a single element, i.e... lieu of the required minimum physical heights of the antennas proper. Also, in other situations, it may...

47 CFR 73.186 - Establishment of effective field at one kilometer.

Code of Federal Regulations, 2011 CFR

2011-10-01

... radiation (not less than one wave length or 5 times the vertical height in the case of a single element, i.e... lieu of the required minimum physical heights of the antennas proper. Also, in other situations, it may...

Eyelashes divert airflow to protect the eye

PubMed Central

Amador, Guillermo J.; Mao, Wenbin; DeMercurio, Peter; Montero, Carmen; Clewis, Joel; Alexeev, Alexander; Hu, David L.

2015-01-01

Eyelashes are ubiquitous, although their function has long remained a mystery. In this study, we elucidate the aerodynamic benefits of eyelashes. Through anatomical measurements, we find that 22 species of mammals possess eyelashes of a length one-third the eye width. Wind tunnel experiments confirm that this optimal eyelash length reduces both deposition of airborne particles and evaporation of the tear film by a factor of two. Using scaling theory, we find this optimum arises because of the incoming flow's interactions with both the eye and eyelashes. Short eyelashes create a stagnation zone above the ocular surface that thickens the boundary layer, causing shear stress to decrease with increasing eyelash length. Long eyelashes channel flow towards the ocular surface, causing shear stress to increase with increasing eyelash length. These competing effects result in a minimum shear stress for intermediate eyelash lengths. This design may be employed in creating eyelash-inspired protection for optical sensors. PMID:25716186

Lack of size selectivity for paddlefish captured in hobbled gillnets

USGS Publications Warehouse

Scholten, G.D.; Bettoli, P.W.

2007-01-01

A commercial fishery for paddlefish Polyodon spathula caviar exists in Kentucky Lake, a reservoir on the lower Tennessee River. A 152-mm (bar-measure) minimum mesh size restriction on entanglement gear was enacted in 2002 and the minimum size limit was increased to 864 mm eye-fork length to reduce the possibility of recruitment overfishing. Paddlefish were sampled in 2003-2004 using experimental monofilament gillnets with panels of 89, 102, 127, 152, 178, and 203-mm meshes and the efficacy of the mesh size restriction was evaluated. Following the standards of commercial gear used in that fishery, nets were "hobbled" (i.e., 128 m ?? 3.6 m nets were tied down to 2.4 m; 91 m ?? 9.1 m nets were tied down to 7.6 m). The mean lengths of paddlefish (Ntotal = 576 fish) captured in each mesh were similar among most meshes and bycatch rates of sublegal fish did not vary with mesh size. Selectivity curves could not be modeled because the mean and modal lengths of fish captured in each mesh did not increase with mesh size. Ratios of fish girth to mesh perimeter (G:P) for individual fish were often less than 1.0 as a result of the largest meshes capturing small paddlefish. It is unclear whether lack of size selectivity for paddlefish was because the gillnets were hobbled, the unique morphology of paddlefish, or the fact that they swim with their mouths agape when filter feeding. The lack of size selectivity by hobbled gillnets fished in Kentucky Lake means that managers cannot influence the size of paddlefish captured by commercial gillnet gear by changing minimum mesh size regulations. ?? 2006 Elsevier B.V. All rights reserved.

Command & Control (C2) Systems Acquisition Study

DTIC Science & Technology

1982-09-01

34: 0 The movement of substantial capability closer to individual users with significant improvements in the interface between the user and the system...description of the overall capability desired; (2) an archi- teLLural framework where evolution can occur with minimum subsequent redesign; and (3) a

Stream gage descriptions and streamflow statistics for sites in the Tigris River and Euphrates River Basins, Iraq

USGS Publications Warehouse

Saleh, Dina K.

2010-01-01

Statistical summaries of streamflow data for all long-term streamflow-gaging stations in the Tigris River and Euphrates River Basins in Iraq are presented in this report. The summaries for each streamflow-gaging station include (1) a station description, (2) a graph showing annual mean discharge for the period of record, (3) a table of extremes and statistics for monthly and annual mean discharge, (4) a graph showing monthly maximum, minimum, and mean discharge, (5) a table of monthly and annual mean discharges for the period of record, (6) a graph showing annual flow duration, (7) a table of monthly and annual flow duration, (8) a table of high-flow frequency data (maximum mean discharge for 3-, 7-, 15-, and 30-day periods for selected exceedance probabilities), and (9) a table of low-flow frequency data (minimum mean discharge for 3-, 7-, 15-, 30-, 60-, 90-, and 183-day periods for selected non-exceedance probabilities).

Characterization of Hydrophobic Interactions of Polymers with Water and Phospholipid Membranes Using Molecular Dynamics Simulations

NASA Astrophysics Data System (ADS)

Drenscko, Mihaela

Polymers and lipid membranes are both essential soft materials. The structure and hydrophobicity/hydrophilicity of polymers, as well as the solvent they are embedded in, ultimately determines their size and shape. Understating the variation of shape of the polymer as well as its interactions with model biological membranes can assist in understanding the biocompatibility of the polymer itself. Computer simulations, in particular molecular dynamics, can aid in characterization of the interaction of polymers with solvent, as well as polymers with model membranes. In this thesis, molecular dynamics serve to describe polymer interactions with a solvent (water) and with a lipid membrane. To begin with, we characterize the hydrophobic collapse of single polystyrene chains in water using molecular dynamics simulations. Specifically, we calculate the potential of mean force for the collapse of a single polystyrene chain in water using metadynamics, comparing the results between all atomistic with coarse-grained molecular simulation. We next explore the scaling behavior of the collapsed globular shape at the minimum energy configuration, characterized by the radius of gyration, as a function of chain length. The exponent is close to one third, consistent with that predicted for a polymer chain in bad solvent. We also explore the scaling behavior of the Solvent Accessible Surface Area (SASA) as a function of chain length, finding a similar exponent for both all-atomistic and coarse-grained simulations. Furthermore, calculation of the local water density as a function of chain length near the minimum energy configuration suggests that intermediate chain lengths are more likely to form dewetted states, as compared to shorter or longer chain lengths. Next, in order to investigate the molecular interactions between single hydrophobic polymer chains and lipids in biological membranes and at lipid membrane/solvent interface, we perform a series of molecular dynamics simulations of small membranes using all atomistic and coarse-grained methods. The molecular interaction between common polymer chains used in biomedical applications and the cell membrane is unknown. This interaction may affect the biocompatibility of the polymer chains. Molecular dynamics simulations offer an emerging tool to characterize the interaction between common degradable polymer chains used in biomedical applications, such as polycaprolactone, and model cell membranes. We systematically characterize with long-time all-atomistic molecular dynamics simulations the interaction between single polycaprolactone chains of varying chain lengths with a model phospholipid membrane. We find that the length of polymer chain greatly affects the nature of interaction with the membrane, as well as the membrane properties. Furthermore, we next utilize advanced sampling techniques in molecular dynamics to characterize the two-dimensional free energy surface for the interaction of varying polymer chain lengths (short, intermediate, and long) with model cell membranes. We find that the free energy minimum shifts from the membrane-water interface to the hydrophobic core of the phospholipid membrane as a function of chain length. These results can be used to design polymer chain lengths and chemistries to optimize their interaction with cell membranes at the molecular level.

An exploration of complementary feeding of infants and young children in the rural area of Muhoroni, Nyanza province, Kenya: a descriptive study.

PubMed

Harvey, Sophie; Callaby, Jo; Roberts, Lesley

2017-08-01

Inappropriate infant and young child feeding practices contribute to malnutrition, infection and long-term development limitation. To explore complementary feeding and food safety in Muhoroni District, Nyanza Province in rural Kenya. To compare practices with the Infant and Young Child Feeding (IYCF) guidelines, and identify associations with inappropriate practices. Between January and April 2014, a questionnaire completed by primary caregivers of children aged 6-23 months asked about foods the child had received in the previous 24 hours, the introduction of complementary foods, and the food hygiene practices undertaken by the caregiver. The most recent World Health Organization IYCF core indicators (continued breastfeeding at 1 year; minimum dietary diversity; minimum meal frequency; minimum acceptable diet) were determined for 400 children. These indicators were compared with demographic indicators in multivariate analyses to identify associations with appropriate complementary feeding practices. A total of 55.2% of children aged 12-15 months continued to be breastfed at the time of questioning. Of the study population, 61.5% achieved minimum dietary diversity, 70.8% achieved minimum meal frequency and 43.0% achieved minimum acceptable diet. Older children were more likely to achieve minimum dietary diversity and minimum acceptable diet; however, they were also less likely to achieve minimum meal frequency. High levels of hygiene practices were reported in all areas of food safety. Complementary feeding indicators were higher than nationally, although less than half of children (43.0%) were receiving a minimum acceptable diet. Further work should explore the potential relationship between age and adequate infant feeding.

Correlation of root dentin thickness and length of roots in mesial roots of mandibular molars.

PubMed

Dwivedi, Shweta; Dwivedi, Chandra Dhar; Mittal, Neelam

2014-09-01

The purpose of this study was to analyze the relation of tooth length and distal wall thickness of mesial roots in mandibular molars at different locations (ie, 2 mm below the furcation and at the junction between the middle and apical third). Forty-five mandibular first molars were taken, and the length of each tooth was measured. Then, specimens were divided into three groups according to their length: group I-long (24.2 mm ± 1.8), group II-medium (21 mm ± 1.5) and group III-short (16.8 mm ± 1.8). mesial root of each marked at two levels - at 2 mm below the furcation as well as at junction of apical and middle third of roots. The minimum thickness of the distal root dentine associated with the buccal and lingual canals of the mesial roots was measured, The distance between the buccal and lingual canals and the depth of concavity in the distal surface of the mesial roots were also measured. Statistical analysis was performed by using analysis of variance and the Student-Newman-Keuls test. The minimum thickness of the distal wall of the mesiobuccal canal was significantly different (P < .001) between groups 1 (long) and 3 (short). Distal wall thickness of the mesiobuccal root and distal concavity of the mesial root of mandibular first molars were found to be thinner in longer teeth compared with shorter teeth. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Measures for interoperability of phenotypic data: minimum information requirements and formatting.

PubMed

Ćwiek-Kupczyńska, Hanna; Altmann, Thomas; Arend, Daniel; Arnaud, Elizabeth; Chen, Dijun; Cornut, Guillaume; Fiorani, Fabio; Frohmberg, Wojciech; Junker, Astrid; Klukas, Christian; Lange, Matthias; Mazurek, Cezary; Nafissi, Anahita; Neveu, Pascal; van Oeveren, Jan; Pommier, Cyril; Poorter, Hendrik; Rocca-Serra, Philippe; Sansone, Susanna-Assunta; Scholz, Uwe; van Schriek, Marco; Seren, Ümit; Usadel, Björn; Weise, Stephan; Kersey, Paul; Krajewski, Paweł

2016-01-01

Plant phenotypic data shrouds a wealth of information which, when accurately analysed and linked to other data types, brings to light the knowledge about the mechanisms of life. As phenotyping is a field of research comprising manifold, diverse and time-consuming experiments, the findings can be fostered by reusing and combining existing datasets. Their correct interpretation, and thus replicability, comparability and interoperability, is possible provided that the collected observations are equipped with an adequate set of metadata. So far there have been no common standards governing phenotypic data description, which hampered data exchange and reuse. In this paper we propose the guidelines for proper handling of the information about plant phenotyping experiments, in terms of both the recommended content of the description and its formatting. We provide a document called "Minimum Information About a Plant Phenotyping Experiment", which specifies what information about each experiment should be given, and a Phenotyping Configuration for the ISA-Tab format, which allows to practically organise this information within a dataset. We provide examples of ISA-Tab-formatted phenotypic data, and a general description of a few systems where the recommendations have been implemented. Acceptance of the rules described in this paper by the plant phenotyping community will help to achieve findable, accessible, interoperable and reusable data.

Analysis of 20 magnetic clouds at 1 AU during a solar minimum

NASA Astrophysics Data System (ADS)

Gulisano, A. M.; Dasso, S.; Mandrini, C. H.; Démoulin, P.

We study 20 magnetic clouds, observed in situ by the spacecraft Wind, at the Lagrangian point L1, from 22 August, 1995, to 7 November, 1997. In previous works, assuming a cylindrical symmetry for the local magnetic configuration and a satellite trajectory crossing the axis of the cloud, we obtained their orientations using a minimum variance analysis. In this work we compute the orientations and magnetic configurations using a non-linear simultaneous fit of the geometric and physical parameters for a linear force-free model, including the possibility of a not null impact parameter. We quantify global magnitudes such as the relative magnetic helicity per unit length and compare the values found with both methods (minimum variance and the simultaneous fit). FULL TEXT IN SPANISH

5 CFR 890.1008 - Mandatory debarment for longer than the minimum length.

Code of Federal Regulations, 2010 CFR

2010-01-01

... that were not adjudicated, adversely affected the physical, mental, or financial well-being of one or... (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Administrative Sanctions Imposed Against Health Care Providers Mandatory Debarments § 890.1008 Mandatory debarment for...

77 FR 43721 - Western Pacific Pelagic Fisheries; Revised Swordfish Trip Limits in the Hawaii Deep-Set Longline...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-26

... 1. The authority citation for part 665 continues to read as follows: Authority: 16 U.S.C. 1801 et... length; a minimum of 15 branch lines are attached between any two floats (except basket-style longline...

Integrating aerodynamics and structures in the minimum weight design of a supersonic transport wing

NASA Technical Reports Server (NTRS)

Barthelemy, Jean-Francois M.; Wrenn, Gregory A.; Dovi, Augustine R.; Coen, Peter G.; Hall, Laura E.

1992-01-01

An approach is presented for determining the minimum weight design of aircraft wing models which takes into consideration aerodynamics-structure coupling when calculating both zeroth order information needed for analysis and first order information needed for optimization. When performing sensitivity analysis, coupling is accounted for by using a generalized sensitivity formulation. The results presented show that the aeroelastic effects are calculated properly and noticeably reduce constraint approximation errors. However, for the particular example selected, the error introduced by ignoring aeroelastic effects are not sufficient to significantly affect the convergence of the optimization process. Trade studies are reported that consider different structural materials, internal spar layouts, and panel buckling lengths. For the formulation, model and materials used in this study, an advanced aluminum material produced the lightest design while satisfying the problem constraints. Also, shorter panel buckling lengths resulted in lower weights by permitting smaller panel thicknesses and generally, by unloading the wing skins and loading the spar caps. Finally, straight spars required slightly lower wing weights than angled spars.

Room-Temperature Single-Photon Emission from Micrometer-Long Air-Suspended Carbon Nanotubes

NASA Astrophysics Data System (ADS)

Ishii, A.; Uda, T.; Kato, Y. K.

2017-11-01

Statistics of photons emitted by mobile excitons in individual carbon nanotubes are investigated. Photoluminescence spectroscopy is used to identify the chiralities and suspended lengths of air-suspended nanotubes, and photon-correlation measurements are performed at room temperature on telecommunication-wavelength nanotube emission with a Hanbury-Brown-Twiss setup. We obtain zero-delay second-order correlation g(2 )(0 ) less than 0.5, indicating single-photon generation. Excitation power dependence of the photon antibunching characteristics is examined for nanotubes with various chiralities and suspended lengths, where we find that the minimum value of g(2 )(0 ) is obtained at the lowest power. The influence of exciton diffusion and end quenching is studied by Monte Carlo simulations, and we derive an analytical expression for the minimum value of g(2 )(0 ). Our results indicate that mobile excitons in micrometer-long nanotubes can in principle produce high-purity single photons, leading to new design strategies for quantum photon sources.

Advanced space engine preliminary design

NASA Technical Reports Server (NTRS)

Cuffe, J. P. B.; Bradie, R. E.

1973-01-01

A preliminary design was completed for an O2/H2, 89 kN (20,000 lb) thrust staged combustion rocket engine that has a single-bell nozzle with an overall expansion ratio of 400:1. The engine has a best estimate vacuum specific impulse of 4623.8 N-s/kg (471.5 sec) at full thrust and mixture ratio = 6.0. The engine employs gear-driven, low pressure pumps to provide low NPSH capability while individual turbine-driven, high-speed main pumps provide the system pressures required for high-chamber pressure operation. The engine design dry weight for the fixed-nozzle configuration is 206.9 kg (456.3 lb). Engine overall length is 234 cm (92.1 in.). The extendible nozzle version has a stowed length of 141.5 cm (55.7 in.). Critical technology items in the development of the engine were defined. Development program plans and their costs for development, production, operation, and flight support of the ASE were established for minimum cost and minimum time programs.

Approximate Solutions for a Self-Folding Problem of Carbon Nanotubes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Y Mikata

2006-08-22

This paper treats approximate solutions for a self-folding problem of carbon nanotubes. It has been observed in the molecular dynamics calculations [1] that a carbon nanotube with a large aspect ratio can self-fold due to van der Waals force between the parts of the same carbon nanotube. The main issue in the self-folding problem is to determine the minimum threshold length of the carbon nanotube at which it becomes possible for the carbon nanotube to self-fold due to the van der Waals force. An approximate mathematical model based on the force method is constructed for the self-folding problem of carbonmore » nanotubes, and it is solved exactly as an elastica problem using elliptic functions. Additionally, three other mathematical models are constructed based on the energy method. As a particular example, the lower and upper estimates for the critical threshold (minimum) length are determined based on both methods for the (5,5) armchair carbon nanotube.« less

Method and system for gas flow mitigation of molecular contamination of optics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delgado, Gildardo; Johnson, Terry; Arienti, Marco

A computer-implemented method for determining an optimized purge gas flow in a semi-conductor inspection metrology or lithography apparatus, comprising receiving a permissible contaminant mole fraction, a contaminant outgassing flow rate associated with a contaminant, a contaminant mass diffusivity, an outgassing surface length, a pressure, a temperature, a channel height, and a molecular weight of a purge gas, calculating a flow factor based on the permissible contaminant mole fraction, the contaminant outgassing flow rate, the channel height, and the outgassing surface length, comparing the flow factor to a predefined maximum flow factor value, calculating a minimum purge gas velocity and amore » purge gas mass flow rate from the flow factor, the contaminant mass diffusivity, the pressure, the temperature, and the molecular weight of the purge gas, and introducing the purge gas into the semi-conductor inspection metrology or lithography apparatus with the minimum purge gas velocity and the purge gas flow rate.« less

Effects of the internal friction and the solvent quality on the dynamics of a polymer chain closure.

PubMed

Yu, Wancheng; Luo, Kaifu

2015-03-28

Using 3D Langevin dynamics simulations, we investigate the effects of the internal friction and the solvent quality on the dynamics of a polymer chain closure. We show that the chain closure in good solvents is a purely diffusive process. By extrapolation to zero solvent viscosity, we find that the internal friction of a chain plays a non-ignorable role in the dynamics of the chain closure. When the solvent quality changes from good to poor, the mean closure time τc decreases by about 1 order of magnitude for the chain length 20 ≤ N ≤ 100. Furthermore, τc has a minimum as a function of the solvent quality. With increasing the chain length N, the minimum of τc occurs at a better solvent. Finally, the single exponential distributions of the closure time in poor solvents suggest that the negative excluded volume of segments does not alter the nearly Poisson statistical characteristics of the process of the chain closure.

Protein resistance efficacy of PEO-silane amphiphiles: Dependence on PEO-segment length and concentration

PubMed Central

Rufin, Marc A.; Barry, Mikayla E.; Adair, Paige A.; Hawkins, Melissa L.; Raymond, Jeffery E.; Grunlan, Melissa A.

2016-01-01

In contrast to modification with conventional PEO-silanes (i.e. no siloxane tether), silicones with dramatically enhanced protein resistance have been previously achieved via bulk-modification with poly (ethylene oxide) (PEO)-silane amphiphiles α-(EtO)3Si(CH2)2-oligodimethylsiloxane13-block-PEOn-OCH3 when n = 8 and 16 but not when n = 3. In this work, their efficacy was evaluated in terms of optimal PEO-segment length and minimum concentration required in silicone. For each PEO-silane amphiphile (n = 3, 8, and 16), five concentrations (5, 10, 25, 50, and 100 μmol per 1 g silicone) were evaluated. Efficacy was quantified in terms of the modified silicones’ abilities to undergo rapid, water-driven surface restructuring to form hydrophilic surfaces as well as resistance to fibrinogen adsorption. Only n = 8 and 16 were effective, with a lower minimum concentration in silicone required for n = 8 (10 μmol per 1 g silicone) versus n = 16 (25 μmol per 1 g silicone). Statement of Significance Silicone is commonly used for implantable medical devices, but its hydrophobic surface promotes protein adsorption which leads to thrombosis and infection. Typical methods to incorporate poly(ethylene oxide) (PEO) into silicones have not been effective due to the poor migration of PEO to the surface-biological interface. In this work, PEO-silane amphiphiles – comprised of a siloxane tether (m = 13) and variable PEO segment lengths (n = 3, 8, 16) – were blended into silicone to improve its protein resistance. The efficacy of the amphiphiles was determined to be dependent on PEO length. With the intermediate PEO length (n = 8), water-driven surface restructuring and resulting protein resistance was achieved with a concentration of only 1.7 wt%. PMID:27090588

Reproductive traits of shovelnose sturgeon Scaphirhynchus platorynchus (Rafinesque, 1820) in the lower Platte River, Nebraska

USGS Publications Warehouse

Hamel, M. J.; Rugg, M.L.; Pegg, M.A.; Patino, Reynaldo; Hammen, J.J.

2015-01-01

We assessed reproductive status, fecundity, egg size, and spawning dynamics of shovelnose sturgeon Scaphirhynchus platorynchus in the lower Platte River. Shovelnose sturgeon were captured throughout each year during 2011 and 2012 using a multi-gear approach designed to collect a variety of fish of varying sizes and ages. Fish were collected monthly for a laboratory assessment of reproductive condition. Female shovelnose sturgeon reached fork length at 50% maturity (FL50) at 547 mm and at a minimum length of 449 mm. The average female spawning cycle was 3–5 years. Mean egg count for adult females was 16 098 ± 1103 (SE), and mean egg size was 2.401 ± 0.051 (SE) mm. Total fecundity was positively correlated with length (r2 = 0.728; P < 0.001), mass (r2 = 0.896; P < 0.001), and age (r2 = 0.396; P = 0.029). However, fish size and age did not correlate to egg size (P > 0.05). Male shovelnose sturgeon reached FL50 at 579 mm and at a minimum length of 453 mm. The average male spawning cycle was 1–2 years. Reproductively viable male and female sturgeon occurred during the spring (March–May) and autumn (September–October) in both years, indicating spring and potential autumn spawning events. Shovelnose sturgeon in the lower Platte River are maturing at a shorter length and younger age compared to populations elsewhere. Although it is unknown if the change is plastic or evolutionary, unfavorable environmental conditions or over-harvest may lead to hastened declines compared to other systems.

An Algebraic Implicitization and Specialization of Minimum KL-Divergence Models

NASA Astrophysics Data System (ADS)

Dukkipati, Ambedkar; Manathara, Joel George

In this paper we study representation of KL-divergence minimization, in the cases where integer sufficient statistics exists, using tools from polynomial algebra. We show that the estimation of parametric statistical models in this case can be transformed to solving a system of polynomial equations. In particular, we also study the case of Kullback-Csisźar iteration scheme. We present implicit descriptions of these models and show that implicitization preserves specialization of prior distribution. This result leads us to a Gröbner bases method to compute an implicit representation of minimum KL-divergence models.

Longitudinal aerodynamic performance of a series of power-law and minimum wave drag bodies at Mach 6 and several Reynolds numbers

NASA Technical Reports Server (NTRS)

Ashby, G. C., Jr.

1974-01-01

Experimental data have been obtained for two series of bodies at Mach 6 and Reynolds numbers, based on model length, from 1.4 million to 9.5 million. One series consisted of axisymmetric power-law bodies geometrically constrained for constant length and base diameter with values of the exponent n of 0.25, 0.5, 0.6, 0.667, 0.75, and 1.0. The other series consisted of positively and negatively cambered bodies of polygonal cross section, each having a constant longitudinal area distribution conforming to that required for minimizing zero-lift wave drag at hypersonic speeds under the geometric constraints of given length and volume. At the highest Reynolds number, the power-law body for minimum drag is blunter (exponent n lower) than predicted by inviscid theory (n approximately 0.6 instead of n = 0.667); however, the peak value of lift-drag ratio occurs at n = 0.667. Viscous effects were present on the bodies of polygonal cross section but were less pronounced than those on the power-law bodies. The trapezoidal bodies with maximum width at the bottom were found to have the highest maximum lift-drag ratio and the lowest mimimum drag.

Improving computer security for authentication of users: influence of proactive password restrictions.

PubMed

Proctor, Robert W; Lien, Mei-Ching; Vu, Kim-Phuong L; Schultz, E Eugene; Salvendy, Gavriel

2002-05-01

Entering a username-password combination is a widely used procedure for identification and authentication in computer systems. However, it is a notoriously weak method, in that the passwords adopted by many users are easy to crack. In an attempt to improve security, proactive password checking may be used, in which passwords must meet several criteria to be more resistant to cracking. In two experiments, we examined the influence of proactive password restrictions on the time that it took to generate an acceptable password and to use it subsequently to long in. The required length was a minimum of five characters in Experiment 1 and eight characters in Experiment 2. In both experiments, one condition had only the length restriction, and the other had additional restrictions. The additional restrictions greatly increased the time it took to generate the password but had only a small effect on the time it took to use it subsequently to long in. For the five-character passwords, 75% were cracked when no other restrictions were imposed, and this was reduced to 33% with the additional restrictions. For the eight-character passwords, 17% were cracked with no other restrictions, and 12.5% with restrictions. The results indicate that increasing the minimum character length reduces crackability and increases security, regardless of whether additional restrictions are imposed.

Gillnet selectivity in the Ebro Delta coastal lagoons and its implication for the fishery management of the sand smelt, Atherina boyeri (Actinopterygii: Atherinidae)

NASA Astrophysics Data System (ADS)

Rodríguez-Climent, Sílvia; Alcaraz, Carles; Caiola, Nuno; Ibáñez, Carles; Nebra, Alfonso; Muñoz-Camarillo, Gloria; Casals, Frederic; Vinyoles, Dolors; de Sostoa, Adolfo

2012-12-01

Multimesh nylon gillnets were set in three Ebro Delta (North-East of Spain) lagoons to determine mesh selectivity for the inhabiting fish community. Each gillnet consisted on a series of twelve panels of different mesh size (ranging from 5.0 to 55.0 mm bar length) randomly distributed. The SELECT method (Share Each Length's Catch Total) was used to estimate retention curves through five models: normal location, normal scale, gamma, lognormal and inverse Gaussian. Each model was fitted twice, under the assumptions of equal and proportional to mesh size fishing effort, but no differences were found between approaches. A possible situation of overfishing in the lagoons, where artisanal fisheries are carried out with a low surveillance effort, was assessed using a vulnerable species inhabiting these brackish waters as case study: the sand smelt, Atherina boyeri. The minimum size for its fishery has not been established, thus remaining under an uncontrolled exploitation situation. Therefore, a Minimum Landing Size (MLS) is proposed based on sexual maturity data. The importance of establishing an adequate MLS and regulate mesh sizes in order to respect natural maturation length is discussed, as well as, the proposal of other measures to improve A. boyeri fishery management.

77 FR 15459 - Procedures To Establish Appropriate Minimum Block Sizes for Large Notional Off-Facility Swaps and...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-15

... Commission is of the view that the term swap category is a more descriptive term to convey the concept of a... inappropriate comparative measure for the swaps market.\\46\\ Some of these commenters, for example, argued that...

48 CFR 570.402-6 - Cost-benefit analysis.

Code of Federal Regulations, 2010 CFR

2010-10-01

... provide an informational quotation for standard space for comparison purposes. (1) Adjust the prices... informational quotation. However, you must provide a general description of the Government's needs. (3) If you obtain oral quotations, document the following information, as a minimum: (i) Name and address of the...

30 CFR 780.22 - Geologic information.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Geologic information. 780.22 Section 780.22... Geologic information. (a) General. Each application shall include geologic information in sufficient detail...) Geologic information shall include, at a minimum the following: (1) A description of the geology of the...

30 CFR 780.22 - Geologic information.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 30 Mineral Resources 3 2012-07-01 2012-07-01 false Geologic information. 780.22 Section 780.22... Geologic information. (a) General. Each application shall include geologic information in sufficient detail...) Geologic information shall include, at a minimum the following: (1) A description of the geology of the...

13 CFR 107.1500 - General description of Participating Securities.

Code of Federal Regulations, 2010 CFR

2010-01-01

... in Equity Capital Investments, as defined in § 107.50. (c) Special features of Participating... SMALL BUSINESS INVESTMENT COMPANIES SBA Financial Assistance for Licensees (Leverage) Participating... rules on: (1) Minimum capital (see § 107.210). (2) Liquidity (see § 107.1505). (3) Non-SBA borrowing...

7 CFR 1450.201 - Project area proposal submission requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS BIOMASS CROP... a proposal to CCC that includes, at a minimum: (1) A description of the sources of renewable biomass... commitment from a biomass conversion facility stating that the facility will use, for BCAP purposes, eligible...

7 CFR 1450.201 - Project area proposal submission requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS BIOMASS CROP... a proposal to CCC that includes, at a minimum: (1) A description of the sources of renewable biomass... commitment from a biomass conversion facility stating that the facility will use, for BCAP purposes, eligible...

7 CFR 1450.201 - Project area proposal submission requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS BIOMASS CROP... a proposal to CCC that includes, at a minimum: (1) A description of the sources of renewable biomass... commitment from a biomass conversion facility stating that the facility will use, for BCAP purposes, eligible...

7 CFR 1450.201 - Project area proposal submission requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... CREDIT CORPORATION, DEPARTMENT OF AGRICULTURE LOANS, PURCHASES, AND OTHER OPERATIONS BIOMASS CROP... a proposal to CCC that includes, at a minimum: (1) A description of the sources of renewable biomass... commitment from a biomass conversion facility stating that the facility will use, for BCAP purposes, eligible...

40 CFR 61.356 - Recordkeeping requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... also establish the design minimum and average temperature in the combustion zone and the combustion... temperatures, combustion zone residence time, and description of method and location where the vent stream is... control device are not operated as designed including all periods and the duration when: (i) Any valve car...

Vehicle Modeling for use in the CAFE model: Process description and modeling assumptions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moawad, Ayman; Kim, Namdoo; Rousseau, Aymeric

2016-06-01

The objective of this project is to develop and demonstrate a process that, at a minimum, provides more robust information that can be used to calibrate inputs applicable under the CAFE model’s existing structure. The project will be more fully successful if a process can be developed that minimizes the need for decision trees and replaces the synergy factors by inputs provided directly from a vehicle simulation tool. The report provides a description of the process that was developed by Argonne National Laboratory and implemented in Autonomie.

Dayton Aircraft Cabin Fire Model, Version 3, Volume I. Physical Description.

DTIC Science & Technology

1982-06-01

contact to any surface directly above a burning element, provided that the current flame length makes contact possible. For fires originating on the...no extension of the flames horizontally beneath the surface is considered. The equation for computing the flame length is presented in Section 5. For...high as 0.3. The values chosen for DACFIR3 are 0.15 for Ec and 0.10 for E P. The Steward model is also used to compute flame length , hf, for the fire

Probabilistic Description of Fatigue Crack Growth Under Constant-and Variable-Amplitude Loading

DTIC Science & Technology

1989-03-01

plane, see figure 14. The length of the defected crack component and its angle, b and q, respectively, in Figure 15 were found to depend on the crack...length at which the defection occurs; as the crack length increases, b increases while q decreases. Due to the orientation of the deflected component...Breakpoint Voltage to Fun. Generator Output Setpoint Voltage Take Function Generator Gate High Start Test LNext page 153 Q! ~From last ag lastr DMAe 70

Quantitative study of Xanthosoma violaceum leaf surfaces using RIMAPS and variogram techniques.

PubMed

Favret, Eduardo A; Fuentes, Néstor O; Molina, Ana M

2006-08-01

Two new imaging techniques (rotated image with maximum averaged power spectrum (RIMAPS) and variogram) are presented for the study and description of leaf surfaces. Xanthosoma violaceum was analyzed to illustrate the characteristics of both techniques. Both techniques produce a quantitative description of leaf surface topography. RIMAPS combines digitized images rotation with Fourier transform, and it is used to detect patterns orientation and characteristics of surface topography. Variogram relates the mathematical variance of a surface with the area of the sample window observed. It gives the typical scale lengths of the surface patterns. RIMAPS detects the morphological variations of the surface topography pattern between fresh and dried (herbarium) samples of the leaf. The variogram method finds the characteristic dimensions of the leaf microstructure, i.e., cell length, papillae diameter, etc., showing that there are not significant differences between dry and fresh samples. The results obtained show the robustness of RIMAPS and variogram analyses to detect, distinguish, and characterize leaf surfaces, as well as give scale lengths. Both techniques are tools for the biologist to study variations of the leaf surface when different patterns are present. The use of RIMAPS and variogram opens a wide spectrum of possibilities by providing a systematic, quantitative description of the leaf surface topography.

Minimum-fuel, three-dimensional flight paths for jet transports

NASA Technical Reports Server (NTRS)

Neuman, F.; Kreindler, E.

1985-01-01

A number of studies dealing with fuel minimization are concerned with three-dimensional flight. However, only Neuman and Kreindler (1982) consider cases involving commercial jet transports. In the latter study, only the climb-out and descent portions of complete long-range flight paths below 10,000 ft altitude have been investigated. The present investigation is concerned with the computation of minimum-fuel nonturning and turning flight paths for climb-outs from 2000 to 10,000 ft for long-range flights (greater than 50 n mi), and for complete flight paths of lengths between 5 and 50 n mi.

More about arc-polarized structures in the solar wind

NASA Astrophysics Data System (ADS)

Haaland, S.; Sonnerup, B.; Paschmann, G.

2012-05-01

We report results from a Cluster-based study of the properties of 28 arc-polarized magnetic structures (also called rotational discontinuities) in the solar wind. These Alfvénic events were selected from the database created and analyzed by Knetter (2005) by use of criteria chosen to eliminate ambiguous cases. His studies showed that standard, four-spacecraft timing analysis in most cases lacks sufficient accuracy to identify the small normal magnetic field components expected to accompany such structures, leaving unanswered the question of their existence. Our study aims to break this impasse. By careful application of minimum variance analysis of the magnetic field (MVAB) from each individual spacecraft, we show that, in most cases, a small but significantly non-zero magnetic field component was present in the direction perpendicular to the discontinuity. In the very few cases where this component was found to be large, examination revealed that MVAB had produced an unusual and unexplained orientation of the normal vector. On the whole, MVAB shows that many verifiable rotational discontinuities (Bn ≠ 0) exist in the solar wind and that their eigenvalue ratio (EVR = intermediate/minimum variance) can be extremely large (up to EVR = 400). Each of our events comprises four individual spacecraft crossings. The events include 17 ion-polarized cases and 11 electron-polarized ones. Fifteen of the ion events have widths ranging from 9 to 21 ion inertial lengths, with two outliers at 46 and 54. The electron-polarized events are generally thicker: nine cases fall in the range 20-71 ion inertial lengths, with two outliers at 9 and 13. In agreement with theoretical predictions from a one-dimensional, ideal, Hall-MHD description (Sonnerup et al., 2010), the ion-polarized events show a small depression in field magnitude, while the electron-polarized ones tend to show a small enhancement. This effect was also predicted by Wu and Lee (2000). Judging only from the sense of the plasma flow across our DDs, their propagation appears to be sunward as often as anti-sunward. However, we argue that this result can be misleading as a consequence of the possible presence of magnetic islands within the DDs. How the rotational discontinuities come into existence, how they evolve with time, and what roles they play in the solar wind remain open questions.

30 CFR 1206.151 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-07-01

... interests regarding that contract. To be considered arm's length for any production month, a contract must.... Gathering means the movement of lease production to a central accumulation and/or treatment point on the... is to acquire only the lessee's production and to market that production. Minimum royalty means that...

Syllabus in Trade Welding.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Bureau of Secondary Curriculum Development.

The syllabus outlines material for a course two academic years in length (minimum two and one-half hours daily experience) leading to entry-level occupational ability in several welding trade areas. Fourteen units covering are welding, gas welding, oxyacetylene welding, cutting, nonfusion processes, inert gas shielded-arc welding, welding cast…

Proceedings of the Antenna Applications Symposium Held in Illinois, Robert Allerton Park on 21-23 September 1988. Volume 2

DTIC Science & Technology

1989-06-01

for stainless steel airlines of a nominal length of 7.5 cm, a temperature .hanne of +30C changes the length about ±--_1 electrical degree at 18 GHz...regions, each of which satisfies the source- free boundary conditions. The sum of these modes are then matched to the source discontinuity. The wave...dimension H, perpendicular to the array, represents a free dimension in linear array design limited only by the minimum field-of-view (FOV) orthogonal

The analytical approach to optimization of active region structure of quantum dot laser

NASA Astrophysics Data System (ADS)

Korenev, V. V.; Savelyev, A. V.; Zhukov, A. E.; Omelchenko, A. V.; Maximov, M. V.

2014-10-01

Using the analytical approach introduced in our previous papers we analyse the possibilities of optimization of size and structure of active region of semiconductor quantum dot lasers emitting via ground-state optical transitions. It is shown that there are optimal length' dispersion and number of QD layers in laser active region which allow one to obtain lasing spectrum of a given width at minimum injection current. Laser efficiency corresponding to the injection current optimized by the cavity length is practically equal to its maximum value.

Magnetic Design Guidelines for Electronic Power Supplies.

DTIC Science & Technology

1986-09-30

henries ",= peak flux density in gauss d = wire (conductor) dia in mils CM = d2 = circular mi’s Irms = RMS current in amperes Idc = DC current in...component lac = RMS ac current in the inductor f = minimum frequency in hertz L = inductance in henries Then Eac 2 16.83 x 2, x 760 x .05 10 Eac 1 168.3 x 2...duty cycle x 1/f L inductance in henries *permeability in gauss/oersted H magnetizing force in oersteds ’. i g length of air gap in cm ic length of

Biology Curriculum Guide. Bulletin 1646.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Academic Programs.

This curriculum guide, developed to establish statewide curriculum standards for the Louisiana Competency-based Education Program, contains the minimum competencies and process skills that should be included in a biology course. It consists of: (1) a rationale for an effective science program; (2) a list and description of four major goals of…

Physics Curriculum Guide. Bulletin 1661.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Academic Programs.

This curriculum guide, developed to establish statewide curriculum standards for the Louisiana Competency-based Education Program, contains the minimum competencies and process skills that should be included in a physics course. It consists of: (1) a rationale for an effective science program; (2) a list and description of four major goals of…

48 CFR 205.303 - Announcement of contract awards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... (if significant work is performed at a different location); (4) Funding data. Type of appropriation... DD-LA- (AR) 1279; (D) Including, as a minimum, the following— (1) Contract data. Contract number... contract, description of what is being bought, contract type, whether any of the buy was for foreign...

48 CFR 205.303 - Announcement of contract awards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... (if significant work is performed at a different location); (4) Funding data. Type of appropriation... DD-LA- (AR) 1279; (D) Including, as a minimum, the following— (1) Contract data. Contract number... contract, description of what is being bought, contract type, whether any of the buy was for foreign...

48 CFR 205.303 - Announcement of contract awards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... (if significant work is performed at a different location); (4) Funding data. Type of appropriation... DD-LA- (AR) 1279; (D) Including, as a minimum, the following— (1) Contract data. Contract number... contract, description of what is being bought, contract type, whether any of the buy was for foreign...

48 CFR 205.303 - Announcement of contract awards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... (if significant work is performed at a different location); (4) Funding data. Type of appropriation... DD-LA- (AR) 1279; (D) Including, as a minimum, the following— (1) Contract data. Contract number... contract, description of what is being bought, contract type, whether any of the buy was for foreign...

48 CFR 205.303 - Announcement of contract awards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... (if significant work is performed at a different location); (4) Funding data. Type of appropriation... DD-LA- (AR) 1279; (D) Including, as a minimum, the following— (1) Contract data. Contract number... contract, description of what is being bought, contract type, whether any of the buy was for foreign...

Life Science Curriculum Guide. Bulletin 1614.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Academic Programs.

This curriculum guide, developed to establish statewide curriculum standards for the Louisiana Competency-based Education Program, contains the minimum competencies and process skills that should be included in a life science course. It consists of: (1) a rationale for an effective science program; (2) a list and description of four major goals of…

Aeronautics. America in Space: The First Decade.

ERIC Educational Resources Information Center

Anderton, David A.

The major research and developments in aeronautics during the late 1950's and 1960's are reviewed descriptively with a minimum of technical content. Topics covered include aeronautical research, aeronautics in NASA, The National Advisory Committee for Aeronautics, the X-15 Research Airplane, variable-sweep wing design, the Supersonic Transport…

49 CFR 538.7 - Petitions for reduction of minimum driving range.

Code of Federal Regulations, 2014 CFR

2014-10-01

... type treated as an electric dual fueled automobile. (3) Be written in the English language. (4) State... range is sought. (iii) A description of the model type, including car line designation, engine displacement and type, electric storage capacity, transmission type, and average fuel economy when operating on...

49 CFR 538.7 - Petitions for reduction of minimum driving range.

Code of Federal Regulations, 2012 CFR

2012-10-01

... type treated as an electric dual fueled automobile. (3) Be written in the English language. (4) State... range is sought. (iii) A description of the model type, including car line designation, engine displacement and type, electric storage capacity, transmission type, and average fuel economy when operating on...

Chemistry Curriculum Guide. Bulletin 1660.

ERIC Educational Resources Information Center

Louisiana State Dept. of Education, Baton Rouge. Div. of Academic Programs.

This curriculum guide, developed to establish statewide curriculum standards for the Louisiana Competency-based Education Program, contains the minimum competencies and process skills that should be included in a chemistry course. It consists of: (1) a rationale for an effective science program; (2) a list and description of four major goals of…

Underage Children and Social Networking

ERIC Educational Resources Information Center

Weeden, Shalynn; Cooke, Bethany; McVey, Michael

2013-01-01

Despite minimum age requirements for joining popular social networking services such as Facebook, many students misrepresent their real ages and join as active participants in the networks. This descriptive study examines the use of social networking services (SNSs) by children under the age of 13. The researchers surveyed a sample of 199…

49 CFR 538.7 - Petitions for reduction of minimum driving range.

Code of Federal Regulations, 2011 CFR

2011-10-01

... type treated as an electric dual fueled automobile. (3) Be written in the English language. (4) State... range is sought. (iii) A description of the model type, including car line designation, engine displacement and type, electric storage capacity, transmission type, and average fuel economy when operating on...

17 CFR 229.1114 - (Item 1114) Credit enhancement and other support, except for certain derivatives instruments.

Code of Federal Regulations, 2011 CFR

2011-04-01

... and other support, except for certain derivatives instruments. 229.1114 Section 229.1114 Commodity and... support, except for certain derivatives instruments. (a) Descriptive information. To the extent material..., guaranteed investment contracts and minimum principal payment agreements. (3) Any derivatives whose primary...

14 CFR 141.55 - Training course: Contents.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Training course: Contents. 141.55 Section... Training course: Contents. (a) Each training course for which approval is requested must meet the minimum... trained in the room at one time; (2) A description of each type of audiovisual aid, projector, tape...

43 CFR 3931.11 - Content of plan of development.

Code of Federal Regulations, 2012 CFR

2012-10-01

... in situ development sequence, with appropriate time-frames; (h) A narrative addressing the environmental aspects of the proposed mine or in situ operation, including at a minimum, the following: (1) An... hazardous to people or animals; and (2) For in situ operations, a description of the method and materials to...

43 CFR 3931.11 - Content of plan of development.

Code of Federal Regulations, 2011 CFR

2011-10-01

... in situ development sequence, with appropriate time-frames; (h) A narrative addressing the environmental aspects of the proposed mine or in situ operation, including at a minimum, the following: (1) An... hazardous to people or animals; and (2) For in situ operations, a description of the method and materials to...

43 CFR 3931.11 - Content of plan of development.

Code of Federal Regulations, 2013 CFR

2013-10-01

... in situ development sequence, with appropriate time-frames; (h) A narrative addressing the environmental aspects of the proposed mine or in situ operation, including at a minimum, the following: (1) An... hazardous to people or animals; and (2) For in situ operations, a description of the method and materials to...

43 CFR 3931.11 - Content of plan of development.

Code of Federal Regulations, 2014 CFR

2014-10-01

... in situ development sequence, with appropriate time-frames; (h) A narrative addressing the environmental aspects of the proposed mine or in situ operation, including at a minimum, the following: (1) An... hazardous to people or animals; and (2) For in situ operations, a description of the method and materials to...

A Short German Version of the Self Description Questionnaire I: Theoretical and Empirical Comparability

ERIC Educational Resources Information Center

Arens, A. Katrin; Yeung, Alexander Seeshing; Craven, Rhonda G.; Hasselhorn, Marcus

2013-01-01

This study aims to develop a short German version of the Self Description Questionnaire (SDQ I-GS) in order to present a robust economical instrument for measuring German preadolescents' multidimensional self-concept. A full German version of the SDQ I (SDQ I-G) that maintained the original structure and thus length of the English original SDQ I…

Computational domain length and Reynolds number effects on large-scale coherent motions in turbulent pipe flow

NASA Astrophysics Data System (ADS)

Feldmann, Daniel; Bauer, Christian; Wagner, Claus

2018-03-01

We present results from direct numerical simulations (DNS) of turbulent pipe flow at shear Reynolds numbers up to Reτ = 1500 using different computational domains with lengths up to ?. The objectives are to analyse the effect of the finite size of the periodic pipe domain on large flow structures in dependency of Reτ and to assess a minimum ? required for relevant turbulent scales to be captured and a minimum Reτ for very large-scale motions (VLSM) to be analysed. Analysing one-point statistics revealed that the mean velocity profile is invariant for ?. The wall-normal location at which deviations occur in shorter domains changes strongly with increasing Reτ from the near-wall region to the outer layer, where VLSM are believed to live. The root mean square velocity profiles exhibit domain length dependencies for pipes shorter than 14R and 7R depending on Reτ. For all Reτ, the higher-order statistical moments show only weak dependencies and only for the shortest domain considered here. However, the analysis of one- and two-dimensional pre-multiplied energy spectra revealed that even for larger ?, not all physically relevant scales are fully captured, even though the aforementioned statistics are in good agreement with the literature. We found ? to be sufficiently large to capture VLSM-relevant turbulent scales in the considered range of Reτ based on our definition of an integral energy threshold of 10%. The requirement to capture at least 1/10 of the global maximum energy level is justified by a 14% increase of the streamwise turbulence intensity in the outer region between Reτ = 720 and 1500, which can be related to VLSM-relevant length scales. Based on this scaling anomaly, we found Reτ⪆1500 to be a necessary minimum requirement to investigate VLSM-related effects in pipe flow, even though the streamwise energy spectra does not yet indicate sufficient scale separation between the most energetic and the very long motions.

Magnetic Resonance Imaging of Optic Nerve Traction During Adduction in Primary Open-Angle Glaucoma With Normal Intraocular Pressure

PubMed Central

Demer, Joseph L.; Clark, Robert A.; Suh, Soh Youn; Giaconi, JoAnn A.; Nouri-Mahdavi, Kouros; Law, Simon K.; Bonelli, Laura; Coleman, Anne L.; Caprioli, Joseph

2017-01-01

Purpose We used magnetic resonance imaging (MRI) to ascertain effects of optic nerve (ON) traction in adduction, a phenomenon proposed as neuropathic in primary open-angle glaucoma (POAG). Methods Seventeen patients with POAG and maximal IOP ≤ 20 mm Hg, and 31 controls underwent MRI in central gaze and 20° to 30° abduction and adduction. Optic nerve and sheath area centroids permitted computation of midorbital lengths versus minimum paths. Results Average mean deviation (±SEM) was −8.2 ± 1.2 dB in the 15 patients with POAG having interpretable perimetry. In central gaze, ON path length in POAG was significantly more redundant (104.5 ± 0.4% of geometric minimum) than in controls (102.9 ± 0.4%, P = 2.96 × 10−4). In both groups the ON became significantly straighter in adduction (28.6 ± 0.8° in POAG, 26.8 ± 1.1° in controls) than central gaze and abduction. In adduction, the ON in POAG straightened to 102.0% ± 0.2% of minimum path length versus 104.5% ± 0.4% in central gaze (P = 5.7 × 10−7), compared with controls who straightened to 101.6% ± 0.1% from 102.9% ± 0.3% in central gaze (P = 8.7 × 10−6); and globes retracted 0.73 ± 0.09 mm in POAG, but only 0.07 ± 0.08 mm in controls (P = 8.8 × 10−7). Both effects were confirmed in age-matched controls, and remained significant after correction for significant effects of age and axial globe length (P = 0.005). Conclusions Although tethering and elongation of ON and sheath are normal in adduction, adduction is associated with abnormally great globe retraction in POAG without elevated IOP. Traction in adduction may cause mechanical overloading of the ON head and peripapillary sclera, thus contributing to or resulting from the optic neuropathy of glaucoma independent of IOP. PMID:28829843

Minimum length of the adaptation and collection period in digestibility trials with sheep fed ad libitum only forage or forage plus concentrate.

PubMed

Farenzena, R; Kozloski, G V; Gindri, M; Stefanello, S

2017-10-01

Two in vivo digestibility trials with sheep were conducted to identify the minimum period length of feeding a new diet to obtain reproducible values of nutritional variables onward and the minimum length of collection period as to obtain maximal precision for each variable. Trial 1 was conducted with ten Polwarth male sheep (34 ± 5 kg body weight (BW)) throughout three 21-day periods, in a completely randomized two-way crossover design. The animals were divided into two groups (Group A and B, n = 5 per group) which were fed ad libitum with a sequence of the following diets throughout the periods: Group A: hay - hay plus concentrate - hay; Group B: hay plus concentrate - hay - hay plus concentrate. The concentrate was included in a proportion of 0.33 of the total diet. The intake, and the faecal and urinary excretion were measured daily throughout the experiment. For evaluating rumen fermentation variables, in Trial 2 four Santa Inês male sheep (65 ± 5 kg BW) fitted with ruminal cannula were used. The animals were randomly divided into two groups (n = 2 per group), and the trial was conducted through four 21 days experimental period, in a three-way crossover design, using experimental diets and feeding management similar to Trial 1. The results indicated that, even though no clear or consistent steady-state condition was identified for rumen fermentation or urinary excretion variables, the adaptation period for measuring OM digestibility in in vivo trials with sheep fed ad libitum where the diet shifts from one of only hay to another containing concentrate, or vice-versa, should be at least 12 days long. Moreover, although no precision improvement was obtained by increasing the collection period above 1 day for measuring OM digestibility, the minimal length of collection period should be 4 days for measuring faecal excretion variables and 7 days for measuring urinary excretion variables. Journal of Animal Physiology and Animal Nutrition © 2016 Blackwell Verlag GmbH.

The origin of unequal bond lengths in the C 1B 2 state of SO 2: Signatures of high-lying potential energy surface crossings in the low-lying vibrational structure

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, G. Barratt; Jiang, Jun; Field, Robert W.

Here the C 1B 2 state of SO 2 has a double-minimum potential in the antisymmetric stretch coordinate, such that the minimum energy geometry has nonequivalent SO bond lengths. The asymmetry in the potential energy surface is expressed as a staggering in the energy levels of the v' 3 progression. We have recently made the first observation of low-lying levels with odd quanta of v' 3, which allows us--in the current work--to characterize the origins of the level staggering. Our work demonstrates the usefulness of low-lying vibrational level structure, where the character of the wavefunctions can be relatively easily understood,more » to extract information about dynamically important potential energy surface crossings that occur at much higher energy. The measured staggering pattern is consistent with a vibronic coupling model for the double-minimum, which involves direct coupling to the bound 2 1A 1 state and indirect coupling with the repulsive 3 1A 1 state. The degree of staggering in the v' 3 levels increases with quanta of bending excitation, which is consistent with the approach along the C state potential energy surface to a conical intersection with the 2 1A 1 surface at a bond angle of ~145°.« less

The origin of unequal bond lengths in the C 1B 2 state of SO 2: Signatures of high-lying potential energy surface crossings in the low-lying vibrational structure

DOE PAGES

Park, G. Barratt; Jiang, Jun; Field, Robert W.

2016-04-14

Here the C 1B 2 state of SO 2 has a double-minimum potential in the antisymmetric stretch coordinate, such that the minimum energy geometry has nonequivalent SO bond lengths. The asymmetry in the potential energy surface is expressed as a staggering in the energy levels of the v' 3 progression. We have recently made the first observation of low-lying levels with odd quanta of v' 3, which allows us--in the current work--to characterize the origins of the level staggering. Our work demonstrates the usefulness of low-lying vibrational level structure, where the character of the wavefunctions can be relatively easily understood,more » to extract information about dynamically important potential energy surface crossings that occur at much higher energy. The measured staggering pattern is consistent with a vibronic coupling model for the double-minimum, which involves direct coupling to the bound 2 1A 1 state and indirect coupling with the repulsive 3 1A 1 state. The degree of staggering in the v' 3 levels increases with quanta of bending excitation, which is consistent with the approach along the C state potential energy surface to a conical intersection with the 2 1A 1 surface at a bond angle of ~145°.« less

Electrofishing effort required to estimate biotic condition in southern Idaho Rivers

USGS Publications Warehouse

Maret, Terry R.; Ott, Douglas S.; Herlihy, Alan T.

2007-01-01

An important issue surrounding biomonitoring in large rivers is the minimum sampling effort required to collect an adequate number of fish for accurate and precise determinations of biotic condition. During the summer of 2002, we sampled 15 randomly selected large-river sites in southern Idaho to evaluate the effects of sampling effort on an index of biotic integrity (IBI). Boat electrofishing was used to collect sample populations of fish in river reaches representing 40 and 100 times the mean channel width (MCW; wetted channel) at base flow. Minimum sampling effort was assessed by comparing the relation between reach length sampled and change in IBI score. Thirty-two species of fish in the families Catostomidae, Centrarchidae, Cottidae, Cyprinidae, Ictaluridae, Percidae, and Salmonidae were collected. Of these, 12 alien species were collected at 80% (12 of 15) of the sample sites; alien species represented about 38% of all species (N = 32) collected during the study. A total of 60% (9 of 15) of the sample sites had poor IBI scores. A minimum reach length of about 36 times MCW was determined to be sufficient for collecting an adequate number of fish for estimating biotic condition based on an IBI score. For most sites, this equates to collecting 275 fish at a site. Results may be applicable to other semiarid, fifth-order through seventh-order rivers sampled during summer low-flow conditions.

Model of Transition from Laminar to Turbulent Flow

NASA Astrophysics Data System (ADS)

Kanda, Hidesada

2001-11-01

For circular pipe flows, a model of transition from laminar to turbulent flow has already been proposed and the minimum critical Reynolds number of approximately 2040 was obtained (Kanda, 1999). In order to prove the validity of the model, another verification is required. Thus, for plane Poiseuille flow, results of previous investigations were studied, focusing on experimental data on the critical Reynolds number Rc, the entrance length, and the transition length. Consequently, concerning the natural transition, it was confirmed from the experimental data that (i) the transition occurs in the entrance region, (ii) Rc increases as the contraction ratio in the inlet section increases, and (iii) the minimum Rc is obtained when the contraction ratio is the smallest or one, and there is no-bellshaped entrance or straight parallel plates. Its value exists in the neighborhood of 1300, based on the channel height and the average velocity. Although, for Hagen-Poiseuille flow, the minimum Rc is approximately 2000, based on the pipe diameter and the average velocity, there seems to be no significant difference in the transition from laminar to turbulent flow between Hagen-Poiseuille flow and plane Poiseuille flow (Kanda, 2001). Rc is determined by the shape of the inlet. Kanda, H., 1999, Proc. of ASME Fluids Engineering Division - 1999, FED-Vol. 250, pp. 197-204. Kanda, H., 2001, Proc. of ASME Fluids Engineering Division - 2001.

ReprOlive: a database with linked data for the olive tree (Olea europaea L.) reproductive transcriptome

PubMed Central

Carmona, Rosario; Zafra, Adoración; Seoane, Pedro; Castro, Antonio J.; Guerrero-Fernández, Darío; Castillo-Castillo, Trinidad; Medina-García, Ana; Cánovas, Francisco M.; Aldana-Montes, José F.; Navas-Delgado, Ismael; Alché, Juan de Dios; Claros, M. Gonzalo

2015-01-01

Plant reproductive transcriptomes have been analyzed in different species due to the agronomical and biotechnological importance of plant reproduction. Here we presented an olive tree reproductive transcriptome database with samples from pollen and pistil at different developmental stages, and leaf and root as control vegetative tissues http://reprolive.eez.csic.es). It was developed from 2,077,309 raw reads to 1,549 Sanger sequences. Using a pre-defined workflow based on open-source tools, sequences were pre-processed, assembled, mapped, and annotated with expression data, descriptions, GO terms, InterPro signatures, EC numbers, KEGG pathways, ORFs, and SSRs. Tentative transcripts (TTs) were also annotated with the corresponding orthologs in Arabidopsis thaliana from TAIR and RefSeq databases to enable Linked Data integration. It results in a reproductive transcriptome comprising 72,846 contigs with average length of 686 bp, of which 63,965 (87.8%) included at least one functional annotation, and 55,356 (75.9%) had an ortholog. A minimum of 23,568 different TTs was identified and 5,835 of them contain a complete ORF. The representative reproductive transcriptome can be reduced to 28,972 TTs for further gene expression studies. Partial transcriptomes from pollen, pistil, and vegetative tissues as control were also constructed. ReprOlive provides free access and download capability to these results. Retrieval mechanisms for sequences and transcript annotations are provided. Graphical localization of annotated enzymes into KEGG pathways is also possible. Finally, ReprOlive has included a semantic conceptualisation by means of a Resource Description Framework (RDF) allowing a Linked Data search for extracting the most updated information related to enzymes, interactions, allergens, structures, and reactive oxygen species. PMID:26322066

Near-tip dual-length scale mechanics of mode-I cracking in laminate brittle matrix composites

NASA Technical Reports Server (NTRS)

Ballarini, R.; Islam, S.; Charalambides, P. G.

1992-01-01

This paper presents the preliminary results of an on-going study of the near-tip mechanics of mode-I cracking in brittle matrix composite laminates. A finite element model is developed within the context of two competing characteristic lengths present in the composite: the microstructural length (the thickness of the layers) and a macro-length (crack-length, uncracked ligament size, etc.). For various values of the parameters which describe the ratio of these lengths and the constituent properties, the stresses ahead of a crack perpendicular to the laminates are compared with those predicted by assuming the composite is homogeneous orthotropic. The results can be used to determine the conditions for which homogenization can provide a sufficiently accurate description of the stresses in the vicinity of the crack-tip.

Analysis of some compliance calibration data for chevron-notch bar and rod specimens

NASA Technical Reports Server (NTRS)

Orange, Thomas W.; Bubsey, Raymond T.; Pierce, William S.; Shannon, John L., Jr.

1991-01-01

A set of equations describing certain fracture mechanics parameters for chevron-notch bar and rod specimens are presented. They are developed by fitting earlier compliance calibration data. The difficulty in determining the minimum stress intensity coefficient and the critical crack length is discussed.

46 CFR 173.095 - Towline pull criterion.

Code of Federal Regulations, 2010 CFR

2010-10-01

... diameter in feet (meters). s=that fraction of the propeller circle cylinder which would be intercepted by... shaft centerline at rudder to towing bitts in feet (meters). Δ=displacement in long tons (metric tons). f=minimum freeboard along the length of the vessel in feet (meters). B=molded beam in feet (meters...

46 CFR 28.835 - Fuel systems.

Code of Federal Regulations, 2012 CFR

2012-10-01

... flexible tubing or hose is permitted in the fuel supply line at or near the engine to prevent damage by vibration. If nonmetallic flexible hose is used it must: (1) Not exceed the minimum length needed to allow... with wire braid; (4) Be fitted with suitable, corrosion resistant, compression fittings; and (5) Be...

46 CFR 28.835 - Fuel systems.

Code of Federal Regulations, 2014 CFR

2014-10-01

... flexible tubing or hose is permitted in the fuel supply line at or near the engine to prevent damage by vibration. If nonmetallic flexible hose is used it must: (1) Not exceed the minimum length needed to allow... with wire braid; (4) Be fitted with suitable, corrosion resistant, compression fittings; and (5) Be...

46 CFR 28.835 - Fuel systems.

Code of Federal Regulations, 2013 CFR

2013-10-01

... flexible tubing or hose is permitted in the fuel supply line at or near the engine to prevent damage by vibration. If nonmetallic flexible hose is used it must: (1) Not exceed the minimum length needed to allow... with wire braid; (4) Be fitted with suitable, corrosion resistant, compression fittings; and (5) Be...

46 CFR 28.835 - Fuel systems.

Code of Federal Regulations, 2010 CFR

2010-10-01

... flexible tubing or hose is permitted in the fuel supply line at or near the engine to prevent damage by vibration. If nonmetallic flexible hose is used it must: (1) Not exceed the minimum length needed to allow... with wire braid; (4) Be fitted with suitable, corrosion resistant, compression fittings; and (5) Be...

DETERMINING THE MINIMUM NUMBER OF SITES FOR BIOASSESSMENT OF THE OHIO RIVER

EPA Science Inventory

For wadeable stream bioassessment, much work has been done to determine the number of samples to composite or the appropriate reach length for obtaining an adequate sample. Proportions of stream miles in a given condition are then often reported at the watershed or ecoregion lev...

7 CFR 3431.13 - Terms of loan repayment and length of service requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

...) COOPERATIVE STATE RESEARCH, EDUCATION, AND EXTENSION SERVICE, DEPARTMENT OF AGRICULTURE VETERINARY MEDICINE LOAN REPAYMENT PROGRAM Administration of the Veterinary Medicine Loan Repayment Program § 3431.13 Terms... service in a veterinary shortage situation, as determined by the Secretary, with a minimum of 3 years (and...

46 CFR 172.030 - Exemptions for certain vessels.

Code of Federal Regulations, 2010 CFR

2010-10-01

... to a minimum by carrying as few slack holds as possible. (4) Each slack surface must be leveled. (5...=(0.268 r) if r is slack surface of grain, i.e...=breadth of slack grain surface (m L=Length of compartment (m) Disp.=Displacement of vessel (tons) SF...

Is percutaneous repair better than open repair in acute Achilles tendon rupture?

PubMed

Henríquez, Hugo; Muñoz, Roberto; Carcuro, Giovanni; Bastías, Christian

2012-04-01

Open repair of Achilles tendon rupture has been associated with higher levels of wound complications than those associated with percutaneous repair. However, some studies suggest there are higher rerupture rates and sural nerve injuries with percutaneous repair. We compared the two types of repairs in terms of (1) function (muscle strength, ankle ROM, calf and ankle perimeter, single heel rise tests, and work return), (2) cosmesis (length scar, cosmetic appearance), and (3) complications. We retrospectively reviewed 32 surgically treated patients with Achilles rupture: 17 with percutaneous repair and 15 with open repair. All patients followed a standardized rehabilitation protocol. The minimum followup was 6 months (mean, 18 months; range, 6-48 months). We observed similar values of plantar flexor strength, ROM, calf and ankle perimeter, and single heel raising test between the groups. Mean time to return to work was longer for patients who had open versus percutaneous repair (5.6 months versus 2.8 months). Mean scar length was greater in the open repair group (9.5 cm versus 2.9 cm). Cosmetic appearance was better in the percutaneous group. Two wound complications and one rerupture were found in the open repair group. One case of deep venous thrombosis occurred in the percutaneous repair group. All complications occurred before 6 months after surgery. We identified no patients with nerve injury. Percutaneous repair provides function similar to that achieved with open repair, with a better cosmetic appearance, a lower rate of wound complications, and no apparent increase in the risk of rerupture. Level III, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

Morphological description of Cosmocerca sp. (Nematoda: Cosmocerdidae) from the Mascarene grass frog Ptychadena cf. mascareniensis (Amphibia: Ptychadenidae). A light and scanning electron microscopic studies.

PubMed

Abdel-Gaber, Rewaida; Abdel-Ghaffar, Fathy; Kamel, Reem; Maher, Sherein; El Deeb, Nashwa; Al Quraishy, Saleh; Mehlhorn, Heinz

2017-06-01

The Mascarene grass frog Ptychadena cf. mascareniensis is a species of frog with a vast area of distribution in Africa. A total of 300 frog specimens were collected from different localities at El-Giza province, Egypt; then dissected and examined for the presence of parasitic infection. Only eighty six (28.66%) specimens were found to be naturally infected with nematode parasite. Seasonally, the prevalence of infection was reached its maximum value of 74.66% during summer and minimum values of 26.66% (20/75), 13.33% (10/75) during spring and autumn, respectively; while no records were observed during winter season. The morphology of the recovered parasite was studied by using light and scanning electron microscopy. The adult worm characterized by anterior extremity with small mouth opening being surrounded by three lips provided with four sub-median cephalic papillae and one pair of lateral amphids. Body measurements showed that male worms were smaller than females measuring 1.22-2.43 (2.21 ± 0.1) mm in length and 0.21-0.34 (0.29 ± 0.01) mm in width. Females measured 1.9-3.7 (2.8 ± 0.1) mm in length and 0.24-0.42 (0.38 ± 0.01) mm in width. Comparing the present parasite with other species of the same genus described previously, several similarities were observed. However, peculiar new characteristics such as the arrangement of plectanes and somatic papillae, the presence of gubernaculum, the position of nerve ring, excretory pore, and vulval opening make it reasonable belongs to the family Cosmocercidae and identified as Cosmocerca sp. In addition, the present study was the first report for occurrence of cosmocercid species from the Mascarene grass frog in Egypt.

Short wavelength turbulence generated by shear in the quiescent H-mode edge on DIII–D

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rost, J. C.; Porkolab, M.; Dorris, J.

2014-06-15

A region of turbulence with large radial wavenumber (k{sub r}ρ{sub s}>1) is found in the high-shear portion of the plasma edge in Quiescent H-mode (QH-mode) on DIII–D using the Phase Contrast Imaging (PCI) diagnostic. At its peak outside the minimum of the E{sub r} well, the turbulence exhibits large amplitude n{sup ~}/n∼40%, with large radial wavenumber |k{sup ¯}{sub r}/k{sup ¯}{sub θ}|∼11 and short radial correlation length L{sub r}/ρ{sub i}∼0.2. The turbulence inside the E{sub r} well minimum is characterized by the opposite sign in radial wavenumber from that of turbulence outside the minimum, consistent with the expected effects of velocitymore » shear. The PCI diagnostic provides a line-integrated measurement of density fluctuations, so data are taken during a scan of plasma position at constant parameters to allow the PCI to sample a range in k{sub r}/k{sub θ}. Analysis of the Doppler shift and plasma geometry allows the turbulence to be localized to a narrow region 3 mm inside the last closed flux surface, outside the minimum of the E{sub r} well. The turbulence amplitude and radial wavenumber and correlation length are determined by fitting the PCI results with a simple non-isotropic turbulence model with two regions of turbulence. These PCI observations, made in QH-mode, are qualitatively similar to those made in standard edge localized modes (ELM)-free H-mode and between ELMs, suggesting a similar role for large k{sub r} turbulence there.« less

Short wavelength turbulence generated by shear in the quiescent H-mode edge on DIII–D [Short wavelength turbulence generated by shear in the QH-mode edge on DIII-D

DOE PAGES

Rost, Jon C.; Porkolab, Miklos; Dorris, James R.; ...

2014-06-17

A region of turbulence with large radial wavenumber (k rρ s > 1) is found in the high-shear portion of the plasma edge in Quiescent H-mode (QH-mode) on DIII{D using the Phase Contrast Imaging (PCI) diagnostic. At its peak outside the minimum of the E r well, the turbulence exhibits large amplitudemore » $$\\tilde{n}$$/n ~ 40%, with large radial wavenumber |$$\\bar{k}$$ r/ $$\\bar{k}$$ θ| ~ 11 and short radial correlation length L r/ρ i ~ 0.2. The turbulence inside the E r well minimum is characterized by the opposite sign in radial wavenumber from that of turbulence outside the minimum, consistent with the expected effects of velocity shear. The PCI diagnostic provides a line-integrated measurement of density uctuations, so data is taken during a scan of plasma position at constant parameters to allow the PCI to sample a range in k r/k θ . Analysis of the Doppler Shift and plasma geometry allows the turbulence to be localized to a narrow region 3 mm inside the last closed flux surface (LCFS), outside the minimum of the E r well. The turbulence amplitude and radial wavenumber and correlation length are determined by fitting the PCI results with a simple non-isotropic turbulence model with two regions of turbulence. Finally, these PCI observations, made in QH-mode, are qualitatively similar to those made in standard ELM-free H-mode and between edge localized modes (ELMs), suggesting a similar role for large k r turbulence there.« less

Method for selecting minimum width of leaf in multileaf adjustable collimator while inhibiting passage of particle beams of radiation through sawtooth joints between collimator leaves

DOEpatents

Ludewigt, Bernhard; Bercovitz, John; Nyman, Mark; Chu, William

1995-01-01

A method is disclosed for selecting the minimum width of individual leaves of a multileaf adjustable collimator having sawtooth top and bottom surfaces between adjacent leaves of a first stack of leaves and sawtooth end edges which are capable of intermeshing with the corresponding sawtooth end edges of leaves in a second stack of leaves of the collimator. The minimum width of individual leaves in the collimator, each having a sawtooth configuration in the surface facing another leaf in the same stack and a sawtooth end edge, is selected to comprise the sum of the penetration depth or range of the particular type of radiation comprising the beam in the particular material used for forming the leaf; plus the total path length across all the air gaps in the area of the joint at the edges between two leaves defined between lines drawn across the peaks of adjacent sawtooth edges; plus at least one half of the length or period of a single sawtooth. To accomplish this, in accordance with the method of the invention, the penetration depth of the particular type of radiation in the particular material to be used for the collimator leaf is first measured. Then the distance or gap between adjoining or abutting leaves is selected, and the ratio of this distance to the height of the sawteeth is selected. Finally the number of air gaps through which the radiation will pass between sawteeth is determined by selecting the number of sawteeth to be formed in the joint. The measurement and/or selection of these parameters will permit one to determine the minimum width of the leaf which is required to prevent passage of the beam through the sawtooth joint.

Low-flow characteristics of streams in South Carolina

USGS Publications Warehouse

Feaster, Toby D.; Guimaraes, Wladmir B.

2017-09-22

An ongoing understanding of streamflow characteristics of the rivers and streams in South Carolina is important for the protection and preservation of the State’s water resources. Information concerning the low-flow characteristics of streams is especially important during critical flow periods, such as during the historic droughts that South Carolina has experienced in the past few decades.Between 2008 and 2016, the U.S. Geological Survey, in cooperation with the South Carolina Department of Health and Environmental Control, updated low-flow statistics at 106 continuous-record streamgages operated by the U.S. Geological Survey for the eight major river basins in South Carolina. The low-flow frequency statistics included the annual minimum 1-, 3-, 7-, 14-, 30-, 60-, and 90-day mean flows with recurrence intervals of 2, 5, 10, 20, 30, and 50 years, depending on the length of record available at the streamflow-gaging station. Computations of daily mean flow durations for the 5-, 10-, 25-, 50-, 75-, 90-, and 95-percent probability of exceedance also were included.This report summarizes the findings from publications generated during the 2008 to 2016 investigations. Trend analyses for the annual minimum 7-day average flows are provided as well as trend assessments of long-term annual precipitation data. Statewide variability in the annual minimum 7-day average flow is assessed at eight long-term (record lengths from 55 to 78 years) streamgages. If previous low-flow statistics were available, comparisons with the updated annual minimum 7-day average flow, having a 10-year recurrence interval, were made. In addition, methods for estimating low-flow statistics at ungaged locations near a gaged location are described.

[Length of stay in maternity wards after normal delivery: diverging point of views].

PubMed

Vautrin, E; Fontaine, A; Lanba, P; Guérin, V; Engelmann, P

2000-02-01

To compare maternity ward professionals' and patients' views regarding the length of stay in the maternity after a normal delivery and to explore working relationships with ambulatory health professionals. Three surveys General professional agreement on a minimum of 4 days; few contacts with ambulatory health professionals. One third of the women found their length of stay excessive. Most did not appear to gain new skills after 3 days, nor to encounter major difficulties once they returned to their home. and conclusion. It will be essential to organize effective working relationships between the maternity ward and ambulatory health professionals to ensure appropriate follow-up after an earlier discharge from the hospital, in agreement with the capabilities and expectations of a majority of women.

Flat tensile specimen design for advanced composites

NASA Technical Reports Server (NTRS)

Worthem, Dennis W.

1990-01-01

Finite element analyses of flat, reduced gage section tensile specimens with various transition region contours were performed. Within dimensional constraints, such as maximum length, tab region width, gage width, gage length, and minimum tab length, a transition contour radius of 41.9 cm produced the lowest stress values in the specimen transition region. The stresses in the transition region were not sensitive to specimen material properties. The stresses in the tab region were sensitive to specimen composite and/or tab material properties. An evaluation of stresses with different specimen composite and tab material combinations must account for material nonlinearity of both the tab and the specimen composite. Material nonlinearity can either relieve stresses in the composite under the tab or elevate them to cause failure under the tab.

Biologic fixation through bridge plating for comminuted shaft fracture of the clavicle: technical aspects and prospective clinical experience with a minimum of 12-month follow-up.

PubMed

Jung, Gu Hee; Park, Chang-Min; Kim, Jae-Do

2013-12-01

For comminuted shaft fracture of clavicle, the operative goal, aside from sound bone healing without complications of direct reduction, is maintenance of the original length in order to maintain the normal biomechanics of adjacent joint. Our bridge plating technique utilizing distraction through a lumbar spreader was expected to be effective for restoring clavicular length with soft tissue preservation. However, there are two disadvantages. First, there is more exposure to radiation compared to conventional plating; and second, it is difficult to control the rotational alignment. Despite these disadvantages, our technique has important benefits, in particular, the ability to preserve clavicular length without soft tissue injury around the fracture site.

Host selection and gonotrophic cycle length of Anopheles punctimacula in southern Mexico.

PubMed

Ulloa, Armando; Gonzalez-Cerón, Lilia; Rodríguez, Mario H

2006-12-01

The host preference, survival rates, and length of the gonotrophic cycle of Anopheles punctimacula was investigated in southern México. Mosquitoes were collected in 15-day separate experiments during the rainy and dry seasons. Daily changes in the parous-nulliparous ratio were recorded and the gonotrophic cycle length was estimated by a time series analysis. Anopheles punctimacula was most abundant during the dry season and preferred animals to humans. The daily survival rate in mosquitoes collected in animal traps was 0.96 (parity rate = 0.86; gonotrophic cycle = 4 days). The length of gonotrophic cycle of 4 days was estimated on the base of a high correlation coefficient value appearing every 4 days. The minimum time estimated for developing mature eggs after blood feeding was 72 h. The proportion of mosquitoes living enough to transmit Plasmodium vivax malaria during the dry season was 0.35.

Resolving Properties of Polymers and Nanoparticle Assembly through Coarse-Grained Computational Studies.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Grest, Gary S.

2017-09-01

Coupled length and time scales determine the dynamic behavior of polymers and polymer nanocomposites and underlie their unique properties. To resolve the properties over large time and length scales it is imperative to develop coarse grained models which retain the atomistic specificity. Here we probe the degree of coarse graining required to simultaneously retain significant atomistic details a nd access large length and time scales. The degree of coarse graining in turn sets the minimum length scale instrumental in defining polymer properties and dynamics. Using polyethylene as a model system, we probe how the coarse - graining scale affects themore » measured dynamics with different number methylene group s per coarse - grained beads. Using these models we simulate polyethylene melts for times over 500 ms to study the viscoelastic properties of well - entangled polymer melts and large nanoparticle assembly as the nanoparticles are driven close enough to form nanostructures.« less

THE SHEFFIELD ALCOHOL POLICY MODEL - A MATHEMATICAL DESCRIPTION.

PubMed

Brennan, Alan; Meier, Petra; Purshouse, Robin; Rafia, Rachid; Meng, Yang; Hill-Macmanus, Daniel; Angus, Colin; Holmes, John

2014-09-30

This methodology paper sets out a mathematical description of the Sheffield Alcohol Policy Model version 2.0, a model to evaluate public health strategies for alcohol harm reduction in the UK. Policies that can be appraised include a minimum price per unit of alcohol, restrictions on price discounting, and broader public health measures. The model estimates the impact on consumers, health services, crime, employers, retailers and government tax revenues. The synthesis of public and commercial data sources to inform the model structure is described. A detailed algebraic description of the model is provided. This involves quantifying baseline levels of alcohol purchasing and consumption by age and gender subgroups, estimating the impact of policies on consumption, for example, using evidence on price elasticities of demand for alcohol, quantification of risk functions relating alcohol consumption to harms including 47 health conditions, crimes, absenteeism and unemployment, and finally monetary valuation of the consequences. The results framework, shown for a minimum price per unit of alcohol, has been used to provide policy appraisals for the UK government policy-makers. In discussion and online appendix, we explore issues around valuation and scope, limitations of evidence/data, how the framework can be adapted to other countries and decisions, and ongoing plans for further development. © 2014 The Authors. Health Economics published by John Wiley & Sons Ltd. © 2014 The Authors. Health Economics published by John Wiley & Sons Ltd.

Perspectives on Art Therapy: The Proceedings of the Pittsburgh Conference on Art Therapy (2nd, Pittsburgh, Pennsylvania, May 20, 1977).

ERIC Educational Resources Information Center

Roth, Ellen A., Ed.; Rubin, Judith A., Ed.

The proceedings of the 2nd annual Pittsburgh Conference on Art Therapy (with handicapped persons) consists of 44 items including full length papers, summaries of previously published papers, descriptions of workshops, and a limited number of abstracts (submitted by those who chose not to present a paper or workshop description). The papers are…

Data bank for short-length red oak lumber

Treesearch

Janice K. Wiedenbeck; Charles J. Gatchell; Elizabeth S. Walker

1994-01-01

This data bank for short-length lumber (less than 8 feet long) contains information on board outlines and defect size and quality for 426 414-inch-thick red oak boards. The Selects, 1 Common, 2A Common, and 3A Common grades are represented in the data bank. The data bank provides the kind of detailed lumber description that is required as input by computer programs...

Wisconsin Driver and Traffic Safety Education: Teacher Preparation Guide. Bulletin Number 7221.

ERIC Educational Resources Information Center

Wisconsin Univ., Whitewater.

This guide identifies the minimum competencies necessary to teach and administer a high school driver and traffic safety education (DTSE) program and provides curricular suggestions for the University of Wisconsin System teacher preparation program. Course descriptions are listed for the following areas: general safety, traffic safety education,…

State Requirements for High School Graduation: Communication Skills. Technical Note.

ERIC Educational Resources Information Center

Lawlor, Joseph

This paper contains descriptions of documents setting forth the minimum communications skills competencies required for high school graduation in seven states: Florida, Louisiana, Maryland, Massachusetts, New Mexico, and Utah. It then describes the procedures used to compile a synthesized list from those documents for use in a project to assess…

48 CFR 811.105 - Items peculiar to one manufacturer.

Code of Federal Regulations, 2010 CFR

2010-10-01

... meet the minimum requirements of VA (see FAR 11.105) or that a “brand name or equal” purchase... particular characteristic is essential to the Government's requirements. (ii) Explain why the “brand name or... whether restrictive specifications or “brand name or equal” purchase descriptions will be included in the...

17 CFR 1.17 - Minimum financial requirements for futures commission merchants and introducing brokers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... internal risk management control system of the futures commission merchant; a description of how the... section; and (ii)(A) The readily marketable collateral is in the possession or control of the applicant or... accepted accounting principles. For the purposes of computing “net capital”, the term “liabilities”: (i...

76 FR 75907 - Notice of Inventory Completion: Minnesota Indian Affairs Council, Bemidji, MN

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-05

...''). History and Description of the Remains At an unknown date, human remains representing, at minimum, two.... SUMMARY: The Minnesota Indian Affairs Council has completed an inventory of human remains and associated... tribe that believes itself to be culturally affiliated with the human remains may contact the Minnesota...

Guideline for the Comprehensive Campus Master Plan System.

ERIC Educational Resources Information Center

State Univ. System of Florida, Tallahassee.

This document is a guideline for institutions in the Florida State University System to use as they comply with state mandates requiring them to develop campus master plans and land management plans. It supplements the minimum criteria in the state's Administrative Code. For each element the guide offers description of its purpose, data…

77 FR 59646 - Notice of Inventory Completion: U.S. Department of Defense, Army Garrison, Redstone Arsenal...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-28

... Indians in Oklahoma. History and Description of the Remains In March 1978, human remains representing, at... minimum, one individual were removed by New World Research, Inc. during a reconnaissance level cultural..., 18 fragmentary pieces of human bone representing one adult of indeterminate sex were recovered from a...

21 CFR 135.130 - Mellorine.

Code of Federal Regulations, 2014 CFR

2014-04-01

... ingredients. (3) When calculating the minimum amount of milkfat and protein required in the finished food, the...) Description. (1) Mellorine is a food produced by freezing, while stirring, a pasteurized mix consisting of... not less than 1.6 pounds of total solids to the gallon, and weighs not less than 4.5 pounds to the...

21 CFR 135.130 - Mellorine.

Code of Federal Regulations, 2010 CFR

2010-04-01

... ingredients. (3) When calculating the minimum amount of milkfat and protein required in the finished food, the...) Description. (1) Mellorine is a food produced by freezing, while stirring, a pasteurized mix consisting of... not less than 1.6 pounds of total solids to the gallon, and weighs not less than 4.5 pounds to the...

21 CFR 135.130 - Mellorine.

Code of Federal Regulations, 2011 CFR

2011-04-01

... ingredients. (3) When calculating the minimum amount of milkfat and protein required in the finished food, the...) Description. (1) Mellorine is a food produced by freezing, while stirring, a pasteurized mix consisting of... not less than 1.6 pounds of total solids to the gallon, and weighs not less than 4.5 pounds to the...

21 CFR 135.130 - Mellorine.

Code of Federal Regulations, 2012 CFR

2012-04-01

... ingredients. (3) When calculating the minimum amount of milkfat and protein required in the finished food, the...) Description. (1) Mellorine is a food produced by freezing, while stirring, a pasteurized mix consisting of... not less than 1.6 pounds of total solids to the gallon, and weighs not less than 4.5 pounds to the...

21 CFR 135.130 - Mellorine.

Code of Federal Regulations, 2013 CFR

2013-04-01

... ingredients. (3) When calculating the minimum amount of milkfat and protein required in the finished food, the...) Description. (1) Mellorine is a food produced by freezing, while stirring, a pasteurized mix consisting of... not less than 1.6 pounds of total solids to the gallon, and weighs not less than 4.5 pounds to the...

Hospital Nurse Aide. Revised.

ERIC Educational Resources Information Center

Iowa Univ., Iowa City. Coll. of Education.

This report presents results of a project to revise the current 120-hour advanced nurse aide course to include all recommended minimum competencies. A three-page description of project objectives, activities, and outcomes is followed by a list of the competencies for the 75-hour nurse aide course for long-term care and for the 120-hour advanced…

Description of the Main Ionospheric Trough by the SM-MIT Model. European Longitudinal Sector

NASA Astrophysics Data System (ADS)

Leshchinskaya, T. Yu.; Pustovalova, L. V.

2018-05-01

Due to the selection of exsisting ionospheric models for incorporation into the created System of Ionospheric Monotoring and Prediction of the Russian Federation, the model of the main ionospheric trough (SM-MIT) is tested with the data from ground-based ionospheric observations in the European longitudinal sector. It is shown that the SM-MIT model does not give an increase in accuracy in comparison to the foF2 monthly median upon a description of the equatorial wall of the MIT. The model describes the foF2 values in the MIT minimum with higher accuracy than the foF2 monthly median or the median IRI model; however, at the same time, the deviations of the model foF2 values from the observed values are high enough: 20-30%. In the MIT minimum, the decrease in the model foF2 values relative to the median values is on average only 10%, which is substantially less than the observed depth of MIT in the evening sector. The verification results have shown that the available SM-MIT model must be completed for practical use.

Longevity in Calumma parsonii, the World's largest chameleon.

PubMed

Tessa, Giulia; Glaw, Frank; Andreone, Franco

2017-03-01

Large body size of ectothermic species can be correlated with high life expectancy. We assessed the longevity of the World's largest chameleon, the Parson's chameleon Calumma parsonii from Madagascar by using skeletochronology of phalanges taken from preserved specimens held in European natural history museums. Due to the high bone resorption we can provide only the minimum age of each specimen. The highest minimum age detected was nine years for a male and eight years for a female, confirming that this species is considerably long living among chameleons. Our data also show a strong correlation between snout-vent length and estimated age. Copyright © 2017 Elsevier Inc. All rights reserved.

Design optimization and probabilistic analysis of a hydrodynamic journal bearing

NASA Technical Reports Server (NTRS)

Liniecki, Alexander G.

1990-01-01

A nonlinear constrained optimization of a hydrodynamic bearing was performed yielding three main variables: radial clearance, bearing length to diameter ratio, and lubricating oil viscosity. As an objective function a combined model of temperature rise and oil supply has been adopted. The optimized model of the bearing has been simulated for population of 1000 cases using Monte Carlo statistical method. It appeared that the so called 'optimal solution' generated more than 50 percent of failed bearings, because their minimum oil film thickness violated stipulated minimum constraint value. As a remedy change of oil viscosity is suggested after several sensitivities of variables have been investigated.

Equilibrium structure and atomic vibrations of Nin clusters

NASA Astrophysics Data System (ADS)

Borisova, Svetlana D.; Rusina, Galina G.

2017-12-01

The equilibrium bond lengths and binding energy, second differences in energy and vibrational frequencies of free clusters Nin (2 ≤ n ≤ 20) were calculated with the use of the interaction potential obtained in the tight-binding approximation (TBA). The results show that the minimum vibration frequency plays a significant role in the evaluation of the dynamic stability of the clusters. A nonmonotonic dependence of the minimum vibration frequency of clusters on their size and the extreme values for the number of atoms in a cluster n = 4, 6, 13, and 19 are demonstrated. This result agrees with the theoretical and experimental data on stable structures of small metallic clusters.

Minimum-fuel, 3-dimensional flightpath guidance of transfer jets

NASA Technical Reports Server (NTRS)

Neuman, F.; Kreindler, E.

1984-01-01

Minimum fuel, three dimensional flightpaths for commercial jet aircraft are discussed. The theoretical development is divided into two sections. In both sections, the necessary conditions of optimal control, including singular arcs and state constraints, are used. One section treats the initial and final portions (below 10,000 ft) of long optimal flightpaths. Here all possible paths can be derived by generating fields of extremals. Another section treats the complete intermediate length, three dimensional terminal area flightpaths. Here only representative sample flightpaths can be computed. Sufficient detail is provided to give the student of optimal control a complex example of a useful application of optimal control theory.

An adaptive data-driven method for accurate prediction of remaining useful life of rolling bearings

NASA Astrophysics Data System (ADS)

Peng, Yanfeng; Cheng, Junsheng; Liu, Yanfei; Li, Xuejun; Peng, Zhihua

2018-06-01

A novel data-driven method based on Gaussian mixture model (GMM) and distance evaluation technique (DET) is proposed to predict the remaining useful life (RUL) of rolling bearings. The data sets are clustered by GMM to divide all data sets into several health states adaptively and reasonably. The number of clusters is determined by the minimum description length principle. Thus, either the health state of the data sets or the number of the states is obtained automatically. Meanwhile, the abnormal data sets can be recognized during the clustering process and removed from the training data sets. After obtaining the health states, appropriate features are selected by DET for increasing the classification and prediction accuracy. In the prediction process, each vibration signal is decomposed into several components by empirical mode decomposition. Some common statistical parameters of the components are calculated first and then the features are clustered using GMM to divide the data sets into several health states and remove the abnormal data sets. Thereafter, appropriate statistical parameters of the generated components are selected using DET. Finally, least squares support vector machine is utilized to predict the RUL of rolling bearings. Experimental results indicate that the proposed method reliably predicts the RUL of rolling bearings.

Selecting, training and assessing new general practice community teachers in UK medical schools.

PubMed

Hydes, Ciaran; Ajjawi, Rola

2015-09-01

Standards for undergraduate medical education in the UK, published in Tomorrow's Doctors, include the criterion 'everyone involved in educating medical students will be appropriately selected, trained, supported and appraised'. To establish how new general practice (GP) community teachers of medical students are selected, initially trained and assessed by UK medical schools and establish the extent to which Tomorrow's Doctors standards are being met. A mixed-methods study with questionnaire data collected from 24 lead GPs at UK medical schools, 23 new GP teachers from two medical schools plus a semi-structured telephone interview with two GP leads. Quantitative data were analysed descriptively and qualitative data were analysed informed by framework analysis. GP teachers' selection is non-standardised. One hundred per cent of GP leads provide initial training courses for new GP teachers; 50% are mandatory. The content and length of courses varies. All GP leads use student feedback to assess teaching, but other required methods (peer review and patient feedback) are not universally used. To meet General Medical Council standards, medical schools need to include equality and diversity in initial training and use more than one method to assess new GP teachers. Wider debate about the selection, training and assessment of new GP teachers is needed to agree minimum standards.

Bayesian outcome-based strategy classification.

PubMed

Lee, Michael D

2016-03-01

Hilbig and Moshagen (Psychonomic Bulletin & Review, 21, 1431-1443, 2014) recently developed a method for making inferences about the decision processes people use in multi-attribute forced choice tasks. Their paper makes a number of worthwhile theoretical and methodological contributions. Theoretically, they provide an insightful psychological motivation for a probabilistic extension of the widely-used "weighted additive" (WADD) model, and show how this model, as well as other important models like "take-the-best" (TTB), can and should be expressed in terms of meaningful priors. Methodologically, they develop an inference approach based on the Minimum Description Length (MDL) principles that balances both the goodness-of-fit and complexity of the decision models they consider. This paper aims to preserve these useful contributions, but provide a complementary Bayesian approach with some theoretical and methodological advantages. We develop a simple graphical model, implemented in JAGS, that allows for fully Bayesian inferences about which models people use to make decisions. To demonstrate the Bayesian approach, we apply it to the models and data considered by Hilbig and Moshagen (Psychonomic Bulletin & Review, 21, 1431-1443, 2014), showing how a prior predictive analysis of the models, and posterior inferences about which models people use and the parameter settings at which they use them, can contribute to our understanding of human decision making.

Model selection for clustering of pharmacokinetic responses.

PubMed

Guerra, Rui P; Carvalho, Alexandra M; Mateus, Paulo

2018-08-01

Pharmacokinetics comprises the study of drug absorption, distribution, metabolism and excretion over time. Clinical pharmacokinetics, focusing on therapeutic management, offers important insights towards personalised medicine through the study of efficacy and toxicity of drug therapies. This study is hampered by subject's high variability in drug blood concentration, when starting a therapy with the same drug dosage. Clustering of pharmacokinetics responses has been addressed recently as a way to stratify subjects and provide different drug doses for each stratum. This clustering method, however, is not able to automatically determine the correct number of clusters, using an user-defined parameter for collapsing clusters that are closer than a given heuristic threshold. We aim to use information-theoretical approaches to address parameter-free model selection. We propose two model selection criteria for clustering pharmacokinetics responses, founded on the Minimum Description Length and on the Normalised Maximum Likelihood. Experimental results show the ability of model selection schemes to unveil the correct number of clusters underlying the mixture of pharmacokinetics responses. In this work we were able to devise two model selection criteria to determine the number of clusters in a mixture of pharmacokinetics curves, advancing over previous works. A cost-efficient parallel implementation in Java of the proposed method is publicly available for the community. Copyright © 2018 Elsevier B.V. All rights reserved.

Observation of roton mode population in a dipolar quantum gas

NASA Astrophysics Data System (ADS)

Chomaz, L.; van Bijnen, R. M. W.; Petter, D.; Faraoni, G.; Baier, S.; Becher, J. H.; Mark, M. J.; Wächtler, F.; Santos, L.; Ferlaino, F.

2018-05-01

The concept of a roton, a special kind of elementary excitation forming a minimum of energy at finite momentum, has been essential for the understanding of the properties of superfluid 4He (ref. 1). In quantum liquids, rotons arise from the strong interparticle interactions, whose microscopic description remains debated2. In the realm of highly controllable quantum gases, a roton mode has been predicted to emerge due to magnetic dipole-dipole interactions despite their weakly interacting character3. This prospect has raised considerable interest4-12; yet roton modes in dipolar quantum gases have remained elusive to observations. Here we report experimental and theoretical studies of the momentum distribution in Bose-Einstein condensates of highly magnetic erbium atoms, revealing the existence of the long-sought roton mode. Following an interaction quench, the roton mode manifests itself with the appearance of symmetric peaks at well-defined finite momentum. The roton momentum follows the predicted geometrical scaling with the inverse of the confinement length along the magnetization axis. From the growth of the roton population, we probe the roton softening of the excitation spectrum in time and extract the corresponding imaginary roton gap. Our results provide a further step in the quest towards supersolidity in dipolar quantum gases13.

Collaboration space division in collaborative product development based on a genetic algorithm

NASA Astrophysics Data System (ADS)

Qian, Xueming; Ma, Yanqiao; Feng, Huan

2018-02-01

The advance in the global environment, rapidly changing markets, and information technology has created a new stage for design. In such an environment, one strategy for success is the Collaborative Product Development (CPD). Organizing people effectively is the goal of Collaborative Product Development, and it solves the problem with certain foreseeability. The development group activities are influenced not only by the methods and decisions available, but also by correlation among personnel. Grouping the personnel according to their correlation intensity is defined as collaboration space division (CSD). Upon establishment of a correlation matrix (CM) of personnel and an analysis of the collaboration space, the genetic algorithm (GA) and minimum description length (MDL) principle may be used as tools in optimizing collaboration space. The MDL principle is used in setting up an object function, and the GA is used as a methodology. The algorithm encodes spatial information as a chromosome in binary. After repetitious crossover, mutation, selection and multiplication, a robust chromosome is found, which can be decoded into an optimal collaboration space. This new method can calculate the members in sub-spaces and individual groupings within the staff. Furthermore, the intersection of sub-spaces and public persons belonging to all sub-spaces can be determined simultaneously.

Characterizing noise and perceived work environment in a neurological intensive care unit.

PubMed

Ryherd, Erica E; Waye, Kerstin Persson; Ljungkvist, Linda

2008-02-01

The hospital sound environment is complex. Alarms, medical equipment, activities, and ventilation generate noise that may present occupational problems as well as hinder recovery among patients. In this study, sound measurements and occupant evaluations were conducted in a neurological intensive care unit. Staff completed questionnaires regarding psychological and physiological reactions to the sound environment. A-weighted equivalent, minimum, and maximum (L(Aeq),L(AFMin),L(AFMax)) and C-weighted peak (L(CPeak)) sound pressure levels were measured over five days at patient and staff locations. Acoustical descriptors that may be explored further were investigated, including level distributions, restorative periods, and spectral content. Measurements near the patients showed average L(Aeq) values of 53-58 dB. The mean length of restorative periods (L(Aeq) below 50 dB for more than 5 min) was 9 and 13 min for day and night, respectively. Ninety percent of the time, the L(AFMax) levels exceeded 50 dB and L(CPeak) exceeded 70 dB. Dosimeters worn by the staff revealed higher noise levels. Personnel perceived the noise as contributing to stress symptoms. Compared to the majority of previous studies, this study provides a more thorough description of intensive care noise and aids in understanding how the sound environment may be disruptive to occupants.

One-stage metatarsal lengthening by allograft interposition: a novel approach for congenital brachymetatarsia.

PubMed

Giannini, Sandro; Faldini, Cesare; Pagkrati, Stavroula; Miscione, Maria Teresa; Luciani, Deianira

2010-07-01

Congenital brachymetatarsia, a shortened metatarsal bone, can be corrected surgically by callus distraction or one-stage lengthening using bone graft. We asked whether one-stage metatarsal lengthening using metatarsal homologous bone graft could improve forefoot function, lead to metatarsal healing, restore metatarsal parabola, and improve cosmetic appearance. We retrospectively reviewed 29 patients (41 feet) in whom we lengthened 50 metatarsals. Surgery consisted of a transverse proximal osteotomy of the metatarsal shaft and interposition of a metatarsal homologous bone graft (average, 13 mm long) fixed with an intramedullary Kirschner wire. Minimum followup was 3 years (mean, 5 years; range, 3-11 years). Bone union was achieved in all cases. The mean preoperative American Orthopaedic Foot and Ankle Society score was 37 points (range, 28-53 points) and the mean postoperative score was 88 points (range, 74-96 points), with an average improvement of 51 points. Radiographically, the mean gain in length was 13 mm (range, 10-15 mm), and the mean percentage increase was 23%. One-stage metatarsal lengthening using interposition of metatarsal homologous bone graft to correct congenital brachymetatarsia has low morbidity for the patient, limited complications, short recovery times, and restores forefoot anatomy. Level IV, therapeutic study. See Guidelines for Authors for a complete description of levels of evidence.

A flight investigation with a STOL airplane flying curved, descending instrument approach paths

NASA Technical Reports Server (NTRS)

Benner, M. S.; Mclaughlin, M. D.; Sawyer, R. H.; Vangunst, R.; Ryan, J. L.

1974-01-01

A flight investigation using a De Havilland Twin Otter airplane was conducted to determine the configurations of curved, 6 deg descending approach paths which would provide minimum airspace usage within the requirements for acceptable commercial STOL airplane operations. Path configurations with turns of 90 deg, 135 deg, and 180 deg were studied; the approach airspeed was 75 knots. The length of the segment prior to turn, the turn radius, and the length of the final approach segment were varied. The relationship of the acceptable path configurations to the proposed microwave landing system azimuth coverage requirements was examined.

Development, qualification, and delivery of a hydrogen burnoff igniter

NASA Technical Reports Server (NTRS)

Ray, D.

1981-01-01

The hydrogen burnoff igniter, a pyrotechnic device used to burn off excess hydrogen gas near the Space Shuttle Main Engine (SSME) nozzle, was designed, fabricated, and qualified. Characteristics of the burnoff igniter include a function time of 8 + or - 2 seconds, a minimum three foot flame length at maximum output, and hot particles projected 15 feet when fired directly into or perpendicular to a 34.5 knot wind. The three foot flame length was considered to be of questionable importance, since the hot particles are the media for igniting the hydrogen. Flame temperature is greater than 1500 F.

Numerical Simulation of Selecting Model Scale of Cable in Wind Tunnel Test

NASA Astrophysics Data System (ADS)

Huang, Yifeng; Yang, Jixin

The numerical simulation method based on computational Fluid Dynamics (CFD) provides a possible alternative means of physical wind tunnel test. Firstly, the correctness of the numerical simulation method is validated by one certain example. In order to select the minimum length of the cable as to a certain diameter in the numerical wind tunnel tests, the numerical wind tunnel tests based on CFD are carried out on the cables with several different length-diameter ratios (L/D). The results show that, when the L/D reaches to 18, the drag coefficient is stable essentially.

42 CFR 84.151 - Harness test; minimum requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... withstand a pull of 113 kg. (250 pounds) for 30 minutes without failure. (2) Belts, rings, and attachments... minutes without separating, and the hose attachments shall be arranged so that the pull or drag of the... attachment of the line shall permit dragging the maximum length of hose considered for approval over a...

23 CFR 230.111 - Implementation of special requirements for the provision of on-the-job training.

Code of Federal Regulations, 2011 CFR

2011-04-01

... to be provided training therein: (1) Availability of minorities, women, and disadvantaged for..., women and disadvantaged persons. (2) The development of full journeymen. (3) The minimum length and type... them, the training standards are made known in the advertised specifications, and such standards are...

Long term spatial and temporal trends in frost day indices in Kansas, USA

USDA-ARS?s Scientific Manuscript database

Frost day indices such as number of frost days (nFDs), frost free days (nFFDs), last spring freeze (LSF), first fall freeze (FFF), and growing-season length (GSL), were calculated using daily minimum air temperature (Tmin) values from 23 centennial weather stations spread across Kansas during four t...

Minimum Sample Size Requirements for Mokken Scale Analysis

ERIC Educational Resources Information Center

Straat, J. Hendrik; van der Ark, L. Andries; Sijtsma, Klaas

2014-01-01

An automated item selection procedure in Mokken scale analysis partitions a set of items into one or more Mokken scales, if the data allow. Two algorithms are available that pursue the same goal of selecting Mokken scales of maximum length: Mokken's original automated item selection procedure (AISP) and a genetic algorithm (GA). Minimum…

46 CFR 164.023-13 - Production tests and inspections.

Code of Federal Regulations, 2010 CFR

2010-10-01

... Constant Rate of Traverse tensile testing machine, capable of initial clamp separation of ten inches and a... production testing on a lot must meet the following criteria for the lot to be shipped as Coast Guard... the acceptance testing values but not less than the performance minimums. (2) Length/weight values...

5 CFR 890.1006 - Notice of proposed mandatory debarment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 30 days prior to the proposed effective date. (b) Contents of the notice. The notice shall contain information indicating the: (1) Effective date of the debarment; (2) Minimum length of the debarment; (3... business days after it was sent. (f) Procedures if notice cannot be delivered. (1) If OPM learns that a...

5 CFR 890.1006 - Notice of proposed mandatory debarment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 30 days prior to the proposed effective date. (b) Contents of the notice. The notice shall contain information indicating the: (1) Effective date of the debarment; (2) Minimum length of the debarment; (3... business days after it was sent. (f) Procedures if notice cannot be delivered. (1) If OPM learns that a...

5 CFR 890.1006 - Notice of proposed mandatory debarment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 30 days prior to the proposed effective date. (b) Contents of the notice. The notice shall contain information indicating the: (1) Effective date of the debarment; (2) Minimum length of the debarment; (3... business days after it was sent. (f) Procedures if notice cannot be delivered. (1) If OPM learns that a...

5 CFR 890.1006 - Notice of proposed mandatory debarment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 30 days prior to the proposed effective date. (b) Contents of the notice. The notice shall contain information indicating the: (1) Effective date of the debarment; (2) Minimum length of the debarment; (3... business days after it was sent. (f) Procedures if notice cannot be delivered. (1) If OPM learns that a...

5 CFR 890.1006 - Notice of proposed mandatory debarment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 30 days prior to the proposed effective date. (b) Contents of the notice. The notice shall contain information indicating the: (1) Effective date of the debarment; (2) Minimum length of the debarment; (3... business days after it was sent. (f) Procedures if notice cannot be delivered. (1) If OPM learns that a...

14 CFR 137.51 - Operation over congested areas: General.

Code of Federal Regulations, 2013 CFR

2013-01-01

... engine aircraft must be operated as follows: (i) Except for helicopters, no person may take off a loaded... effective length of the runway from any point on takeoff up to the time of attaining, with all engines operating at normal takeoff power, 105 percent of the minimum control speed with the critical engine...

14 CFR 137.51 - Operation over congested areas: General.

Code of Federal Regulations, 2014 CFR

2014-01-01

... engine aircraft must be operated as follows: (i) Except for helicopters, no person may take off a loaded... effective length of the runway from any point on takeoff up to the time of attaining, with all engines operating at normal takeoff power, 105 percent of the minimum control speed with the critical engine...

14 CFR 137.51 - Operation over congested areas: General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... engine aircraft must be operated as follows: (i) Except for helicopters, no person may take off a loaded... effective length of the runway from any point on takeoff up to the time of attaining, with all engines operating at normal takeoff power, 105 percent of the minimum control speed with the critical engine...

14 CFR 137.51 - Operation over congested areas: General.

Code of Federal Regulations, 2012 CFR

2012-01-01

... engine aircraft must be operated as follows: (i) Except for helicopters, no person may take off a loaded... effective length of the runway from any point on takeoff up to the time of attaining, with all engines operating at normal takeoff power, 105 percent of the minimum control speed with the critical engine...

14 CFR 137.51 - Operation over congested areas: General.

Code of Federal Regulations, 2011 CFR

2011-01-01

... engine aircraft must be operated as follows: (i) Except for helicopters, no person may take off a loaded... effective length of the runway from any point on takeoff up to the time of attaining, with all engines operating at normal takeoff power, 105 percent of the minimum control speed with the critical engine...

46 CFR 162.039-3 - Requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... fitted with hose of sufficient length to a nozzle or nozzles to provide for suitable application of the... the hose connection); shall weigh more than 55 pounds when fully charged; shall be self-contained, i.e... which will withstand a minimum bursting pressure of 6,000 p.s.i., and a discharge hose or tube which...

46 CFR 162.039-3 - Requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... fitted with hose of sufficient length to a nozzle or nozzles to provide for suitable application of the... the hose connection); shall weigh more than 55 pounds when fully charged; shall be self-contained, i.e... which will withstand a minimum bursting pressure of 6,000 p.s.i., and a discharge hose or tube which...

46 CFR 162.039-3 - Requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... fitted with hose of sufficient length to a nozzle or nozzles to provide for suitable application of the... the hose connection); shall weigh more than 55 pounds when fully charged; shall be self-contained, i.e... which will withstand a minimum bursting pressure of 6,000 p.s.i., and a discharge hose or tube which...

46 CFR 162.039-3 - Requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... fitted with hose of sufficient length to a nozzle or nozzles to provide for suitable application of the... the hose connection); shall weigh more than 55 pounds when fully charged; shall be self-contained, i.e... which will withstand a minimum bursting pressure of 6,000 p.s.i., and a discharge hose or tube which...

46 CFR 162.039-3 - Requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... fitted with hose of sufficient length to a nozzle or nozzles to provide for suitable application of the... the hose connection); shall weigh more than 55 pounds when fully charged; shall be self-contained, i.e... which will withstand a minimum bursting pressure of 6,000 p.s.i., and a discharge hose or tube which...

Ballistic Missile Propellant Evaluation Test Motor System (Super BATES)

DTIC Science & Technology

1974-11-25

and laminated parts are debulked and 75 cured in a hydroclave at 950 psi (minimum) and 3000 F, and machined to final dimensions. All molded parts are...to pick dlf- ferent lengths of motors simply hy relocating and pinning the cross arms. flatbed truck with forklift will be i adequate for moving

50 CFR 229.31 - Pacific Offshore Cetacean Take Reduction Plan.

Code of Federal Regulations, 2010 CFR

2010-10-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MARINE MAMMALS AUTHORIZATION FOR COMMERCIAL....9 m) in length during all sets. Accordingly, all floatlines must be fished at a minimum of 36 feet (10.9 m) below the surface of the water. (c) Pingers. (1) For the purposes of this paragraph (c), a...

Using 4th order Runge-Kutta method for solving a twisted Skyrme string equation

NASA Astrophysics Data System (ADS)

Hadi, Miftachul; Anderson, Malcolm; Husein, Andri

2016-03-01

We study numerical solution, especially using 4th order Runge-Kutta method, for solving a twisted Skyrme string equation. We find numerically that the value of minimum energy per unit length of vortex solution for a twisted Skyrmion string is 20.37 × 1060 eV/m.

Quantitative test for concave aspheric surfaces using a Babinet compensator.

PubMed

Saxena, A K

1979-08-15

A quantitative test for the evaluation of surface figures of concave aspheric surfaces using a Babinet compensator is reported. A theoretical estimate of the sensitivity is 0.002lambda for a minimum detectable phase change of 2 pi x 10(-3) rad over a segment length of 1.0 cm.

Pairwise Trajectory Management (PTM): Concept Description and Documentation

NASA Technical Reports Server (NTRS)

Jones, Kenneth M.; Graff, Thomas J.; Carreno, Victor; Chartrand, Ryan C.; Kibler, Jennifer L.

2018-01-01

Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the accuracy of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the minimum PTM spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This document provides an overview of the proposed application, a description of several key scenarios, a high level discussion of expected air and ground equipment and procedure changes, a description of a NASA human-machine interface (HMI) prototype for the flight crew that would support PTM operations, and initial benefits analysis results. Additionally, included as appendices, are the following documents: the PTM Operational Services and Environment Definition (OSED) document and a companion "Future Considerations for the Pairwise Trajectory Management (PTM) Concept: Potential Future Updates for the PTM OSED" paper, a detailed description of the PTM algorithm and PTM Limit Mach rules, initial PTM safety requirements and safety assessment documents, a detailed description of the design, development, and initial evaluations of the proposed flight crew HMI, an overview of the methodology and results of PTM pilot training requirements focus group and human-in-the-loop testing activities, and the PTM Pilot Guide.

A child feeding index is superior to WHO IYCF indicators in explaining length-for-age Z-scores of young children in rural Cambodia

PubMed Central

Reinbott, Anika; Kuchenbecker, Judith; Herrmann, Johannes; Jordan, Irmgard; Muehlhoff, Ellen; Kevanna, Ou; Krawinkel, Michael

2015-01-01

Background: Adequate young child feeding practices are influenced by a multitude of factors which affect growth and development. A combination of indicators is needed to explain the role of complementary feeding practices in growth retardation. Methods: A cross-sectional nutrition baseline survey was conducted in rural Cambodia in September 2012. Villages in pre-selected communes were randomly selected using stunting as a primary indicator. Data were collected from 803 randomly selected households with children aged 6–23 months, based on a standardised questionnaire and on length/height and weight measurements of mother and child. WHO Infant and Young Child Feeding (IYCF) indicators [minimum dietary diversity (MDD), minimum meal frequency (MMF), minimum acceptable diet (MAD)] and a child feeding index (CFI) were created. The latter consisted of five components: breastfeeding, use of bottle, dietary diversity, food frequency and meal frequency which were adjusted for three age groups: 6–8, 9–11 and 12–23 months. The highest possible score was 10. Associations between length-for-age Z-scores (LAZ) and WHO indicators or CFI were explored. Results: Mean (SD) LAZ was −1.25 (1.14) (n  =  801). Mean (range) CFI was 6.7 (1–10) (n  =  797). Mean CFI was highest in the 9–11-months age group (7.93) and lowest for those aged 12–23 months (5.96). None of the WHO IYCF indicators was associated with LAZ, whereas CFI showed significant association with LAZ (P < 0.01). The association between higher CFI scores and LAZ became weaker as age increased. Conclusion: The results highlight the need to include a wide range of information in the analysis in order to understand the association between appropriate infant feeding practices and child growth. PMID:25226288

Evaluation of daily creel and minimum length limits for Black Crappies and Yellow Perch in Wisconsin

USGS Publications Warehouse

Mosel, Kyle; Isermann, Daniel A.; Hansen, Jonathan F.

2015-01-01

Harvest regulations for Black Crappie Pomoxis nigromaculatus and Yellow Perch Perca flavescens in the northern USA and Canada have not been thoroughly evaluated, and specific guidance regarding where minimum length limits (MLLs) might improve these fisheries is lacking. We examined whether: (1) transitioning from an aggregate statewide daily creel limit of 25 panfish to species-specific daily creel limits of <25 fish or implementing statewide MLLs could reduce harvest of Black Crappie and Yellow Perch in Wisconsin by ≥25%, and (2) MLLs would improve yield by ≥10% and mean TL of harvested fish by ≥25 mm in Wisconsin fisheries. Creel surveys indicated that ≥94% of Wisconsin anglers did not harvest a Black Crappie or Yellow Perch, and ≤0.12% of anglers harvested a daily creel limit of 25 fish. Daily creel limits would need to be ≤7 fish/ angler to reduce harvest by ≥25%. Statewide MLLs would need to be ≥229 mm for Black Crappie and ≥203 mm for Yellow Perch to reduce harvest by ≥25%, but predicted responses to MLLs varied among simulated populations. In general, MLLs were not predicted to improve yield, indicating that growth overfishing was not a widespread problem. Minimum length limits could improve mean TL of harvested fish, but increases ≥25 mm were only observed under 254-mm and 279-mm MLLs, and anglers would have to accept predicted reductions in harvest of ≥30% to achieve these improvements. A 229-mm MLL offered a more equitable trade-off between increases in mean TLs of harvested fish (11–21-mm improvements) and reductions in harvest (22–37% reductions). Our modeling provides a framework for managers to make more informed decisions regarding harvest regulations, but more information regarding angler preferences is needed for selecting appropriate management objectives and harvest regulations.

50 CFR 218.115 - Requirements for monitoring and reporting.

Code of Federal Regulations, 2011 CFR

2011-10-01

...) Narrative description of sensors and platforms utilized for marine mammal detection and timeline... sensor; (vi) Length of time observers maintained visual contact with marine mammal; (vii) Wave height...

Near-infrared optical-absorption behavior in high-beta nonlinear optical chromophore-polymer guest-host materials. II. Dye spacer length effects in an amorphous polycarbonate copolymer host

NASA Astrophysics Data System (ADS)

Barto, Richard R.; Frank, Curtis W.; Bedworth, Peter V.; Ermer, Susan; Taylor, Rebecca E.

2005-06-01

In the second of a three-part series, spectral absorption behavior of nonlinear optical (NLO) dyes incorporated into amorphous polycarbonate, comprised of a homologous series of dialkyl spacer groups extending from the midsection of the dye molecule, is characterized by UV-Vis and photothermal deflection spectroscopy. The dyes are structural analogs of the NLO dye FTC [2-(3-cyano-4-{2-[5-(2-{4-[ethyl-(2-methoxyethyl)amino]phenyl}vinyl)-3,4-diethylthiophen-2-yl]vinyl}-5,5-dimethyl-5H-furan-2-ylidene)malononitrile]. Previous Monte Carlo calculations [B. H. Robinson and L. R. Dalton, J. Phys. Chem. A 104, 4785 (2000)] predict a strong dependence of the macroscopic nonlinear optical susceptibility on the chromophore waist: length aspect ratio in electric-field-poled films arising from interactions between chromophores. It is expected that these interactions will play a role in the absorption characteristics of unpoled films, as well. The spacer groups range in length from diethyl to dihexyl, and each dye is studied over a wide range of concentrations. Among the four dyes studied, a universal dependence of near-IR loss on inhomogeneous broadening of the dye main absorption peak is found. The inhomogeneous width and its concentration dependence are seen to vary with spacer length in a manner characteristic of the near-IR loss-concentration slope at transmission wavelengths of 1.06 and 1.3μm, but not at 1.55μm. The lower wavelength loss behavior is assigned to purely Gaussian broadening, and is described by classical mixing thermodynamic quantities based on the Marcus theory of inhomogeneous broadening [R. A. Marcus, J. Chem. Phys. 43, 1261 (1965)], modeled as a convolution of dye-dye dipole broadening and dye-polymer van der Waals broadening. The Gaussian dipole interactions follow a Loring dipole-broadening description [R. F. Loring, J. Phys. Chem. 94, 513 (1990)] dominated by the excited-state dipole moment, and have a correlated homogeneous broadening contribution. The long-wavelength loss behavior has a non-Gaussian dye-dye dipole contribution which follows Kador's broadening analysis [L. Kador, J. Chem. Phys. 95, 5574 (1991)], with a net broadening described by a convolution of this term with a Gaussian van der Waals interaction given by Obata et al. [M. Obata, S. Machida, and K. Horie, J. Polym. Sci. B 37, 2173 (1999)], with each term governed by the dye spacer length. A minimum in broadening and loss-concentration slope at a spacer length of four carbons per alkyl at all wavelengths has important consequences for practical waveguide devices, and is of higher aspect ratio than the spherical limit shown by Robinson and Dalton to minimize dipole interactions under a poling field.

The classical limit of minimal length uncertainty relation: revisit with the Hamilton-Jacobi method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guo, Xiaobo; Wang, Peng; Yang, Haitang, E-mail: guoxiaobo@swust.edu.cn, E-mail: pengw@scu.edu.cn, E-mail: hyanga@scu.edu.cn

2016-05-01

The existence of a minimum measurable length could deform not only the standard quantum mechanics but also classical physics. The effects of the minimal length on classical orbits of particles in a gravitation field have been investigated before, using the deformed Poisson bracket or Schwarzschild metric. In this paper, we first use the Hamilton-Jacobi method to derive the deformed equations of motion in the context of Newtonian mechanics and general relativity. We then employ them to study the precession of planetary orbits, deflection of light, and time delay in radar propagation. We also set limits on the deformation parameter bymore » comparing our results with the observational measurements. Finally, comparison with results from previous papers is given at the end of this paper.« less

Meet-in-the-Middle Preimage Attacks on Hash Modes of Generalized Feistel and Misty Schemes with SP Round Function

NASA Astrophysics Data System (ADS)

Moon, Dukjae; Hong, Deukjo; Kwon, Daesung; Hong, Seokhie

We assume that the domain extender is the Merkle-Damgård (MD) scheme and he message is padded by a ‘1’, and minimum number of ‘0’s, followed by a fixed size length information so that the length of padded message is multiple of block length. Under this assumption, we analyze securities of the hash mode when the compression function follows the Davies-Meyer (DM) scheme and the underlying block cipher is one of the plain Feistel or Misty scheme or the generalized Feistel or Misty schemes with Substitution-Permutation (SP) round function. We do this work based on Meet-in-the-Middle (MitM) preimage attack techniques, and develop several useful initial structures.

Vehicle Based Vector Sensor

DTIC Science & Technology

2015-09-28

buoyant underwater vehicle with an interior space in which a length of said underwater vehicle is equal to one tenth of the acoustic wavelength...underwater vehicle with an interior space in which a length of said underwater vehicle is equal to one tenth of the acoustic wavelength; an...unmanned underwater vehicle that can function as an acoustic vector sensor. (2) Description of the Prior Art [0004] It is known that a propagating

Quantum-mechanical elaboration for the description of low- and high-order harmonics generated by extended gas media: prospects to the efficiency enhancement in spatially modulated media

NASA Astrophysics Data System (ADS)

Stremoukhov, Sergey Yu; Andreev, Anatoly V.

2018-03-01

A simple model fully matching the description of the low- and high-order harmonic generation in extended media interacting with multicolor laser fields is proposed. The extended atomic media is modeled by a 1D chain of atoms, the number of atoms and the distance between them depend on the pressure of the gas and the length of the gas cell. The response of the individual atoms is calculated accurately in the frame of the non-perturbative theory where the driving field for each atom is calculated with account of dispersion properties of any multicolor field component. In spite of the simplicity of the proposed model it provides the detailed description of behaviour of harmonic spectra under variation of the gas pressure and medium length, it also predicts a scaling law for harmonic generation (an invariant). To demonstrate the wide range of applications of the model we have simulated the results of recent experiments dealing with spatially modulated media and obtained good coincidence between the numerical results and the experimental ones.

Description and quantitative analysis of the dentition of the southern thorny skate Amblyraja doellojuradoi.

PubMed

Delpiani, G; Spath, M C; Deli Antoni, M; Delpiani, M

2017-06-01

A description of the tooth morphology of 234 jaws from the southern thorny skate Amblyraja doellojuradoi in the south-west Atlantic Ocean is given. Seven rows of teeth were selected and length and width of each tooth in these rows were measured. It was found that functional series corresponds to the third teeth and the average width and length of these teeth were compared among jaws, maturity stages, sexes and rows. Generalized linear models were used to determine the subset of measures that most contribute to explain the variability between groups. It was observed that males have longer teeth than females, but the teeth of females are wider. These differences are attributed to reproductive behaviour, in which males bite females to hold them during copulation. This study provides a description of the teeth of A. doellojuradoi, supplying a valuable tool for identification of species. In addition, the establishment of the main variations observed in the dentition, improves the understanding of the species' biology. © 2017 The Fisheries Society of the British Isles.

Description of Hydration Water in Protein (Green Fluorescent Protein) Solution

DOE PAGES

Perticaroli, Stefania; Ehlers, Georg; Stanley, Christopher B.; ...

2016-10-26

The structurally and dynamically perturbed hydration shells that surround proteins and biomolecules have a substantial influence upon their function and stability. This makes the extent and degree of water perturbation of practical interest for general biological study and industrial formulation. Here, we present an experimental description of the dynamical perturbation of hydration water around green fluorescent protein in solution. Less than two shells (~5.5 Å) were perturbed, with dynamics a factor of 2–10 times slower than bulk water, depending on their distance from the protein surface and the probe length of the measurement. Furthermore, this dependence on probe length demonstratesmore » that hydration water undergoes subdiffusive motions (τ ∝ q –2.5 for the first hydration shell, τ ∝ q –2.3 for perturbed water in the second shell), an important difference with neat water, which demonstrates diffusive behavior (τ ∝ q –2). Our results help clarify the seemingly conflicting range of values reported for hydration water retardation as a logical consequence of the different length scales probed by the analytical techniques used.« less

A Study of Relationships between Educational Credentials and Military Performance Criteria

DTIC Science & Technology

1982-04-01

LENGTH: 155 x 6200 COL DESCRIPTION COL DESCRIPTION NOTES 1__ 51._: 2. 52. TAFMS 1 3. 53. 4. SSAN 54, DPOC 1 5. Region 55. 6. CENSUS District 56. DOOC 1 7...SCRIPFION NOTESI 27. 77. ELIGIBILITY TO REENLIST 1 78.8. 29. 12 79. M PEBD 31. AREA 81. FILE FLAG 32. SCORES 82. __ 33, 83. TAFMS 34, 84. 2 35, 85. DPOC 36...the third most signi- ficant skill held by the Service member. Refer to DPOC above for coo vq description and comments. 34 57 Hi. test Year of Educa- 1

31 CFR 375.13 - What requirements apply to offers?

Code of Federal Regulations, 2011 CFR

2011-07-01

... 31 Money and Finance:Treasury 2 2011-07-01 2011-07-01 false What requirements apply to offers? 375... description, par amount, and price of each security offered. All offers must equal or exceed the minimum offer... must express offered prices in terms of price per $100 of par with three decimals, e.g., 102.172. The...

31 CFR 375.13 - What requirements apply to offers?

Code of Federal Regulations, 2014 CFR

2014-07-01

... 31 Money and Finance: Treasury 2 2014-07-01 2014-07-01 false What requirements apply to offers... description, par amount, and price of each security offered. All offers must equal or exceed the minimum offer... must express offered prices in terms of price per $100 of par with three decimals, e.g., 102.172. The...

31 CFR 375.13 - What requirements apply to offers?

Code of Federal Regulations, 2013 CFR

2013-07-01

... 31 Money and Finance:Treasury 2 2013-07-01 2013-07-01 false What requirements apply to offers? 375... description, par amount, and price of each security offered. All offers must equal or exceed the minimum offer... must express offered prices in terms of price per $100 of par with three decimals, e.g., 102.172. The...

31 CFR 375.13 - What requirements apply to offers?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What requirements apply to offers... description, par amount, and price of each security offered. All offers must equal or exceed the minimum offer... must express offered prices in terms of price per $100 of par with three decimals, e.g., 102.172. The...

31 CFR 375.13 - What requirements apply to offers?

Code of Federal Regulations, 2012 CFR

2012-07-01

... 31 Money and Finance:Treasury 2 2012-07-01 2012-07-01 false What requirements apply to offers? 375... description, par amount, and price of each security offered. All offers must equal or exceed the minimum offer... must express offered prices in terms of price per $100 of par with three decimals, e.g., 102.172. The...

THE NEUROLOGICAL MECHANISMS OF HEARING AND SPEECH IN CHILDREN.

ERIC Educational Resources Information Center

TAYLOR, IAN G.

A 5-YEAR LONGITUDINAL STUDY OF 78 CHILDREN (MINIMUM AGE 11 MONTHS) WHO WERE REFERRED TO THE DEPARTMENT OF DEAF EDUCATION AT THE UNIVERSITY OF MANCHESTER, ENGLAND, IS DESCRIBED. THE CHILDREN ALL PRESENTED PROBLEMS RELATED TO SOUND OR LINGUISTICS DEVELOPMENT OR BOTH. AFTER A DESCRIPTION OF THE PHYSIOLOGY OF HEARING AND THE PATHOLOGY OF DEAFNESS, THE…

76 FR 80394 - Notice of Inventory Completion: Alaska State Office, Bureau of Land Management, Anchorage, AK

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-23

... Museum of Natural History, Chicago, IL (Field Museum). The human remains were removed from Cherni Island...''). History and Description of the Remains In 1952, human remains representing a minimum of one individual...: Notice. SUMMARY: The Alaska State Office, Bureau of Land Management has completed an inventory of human...

Demonstration Advanced Avionics System (DAAS). Phase 1 report

NASA Technical Reports Server (NTRS)

1981-01-01

An integrated avionics system which provides expanded functional capabilities that significantly enhance the utility and safety of general aviation at a cost commensurate with the general aviation market is discussed. Displays and control were designed so that the pilot can use the system after minimum training. Functional and hardware descriptions, operational evaluation and failure modes effects analysis are included.

Elementary Core Curriculum Standards: Levels K-3: Arts, Information Technology, Science, Language Arts, Mathematics, Social Studies, Health, Lifestyles.

ERIC Educational Resources Information Center

Utah State Office of Education, Salt Lake City.

Utah's 1987 minimum course description standards for students in kindergarten through third grade are provided in the required core curriculum areas of arts, information technology, science, language arts, mathematics, social studies, and healthy lifestyles. For each curricular area a rationale is given, followed by a brief course description…

47 CFR 27.303 - Upper 700 MHz commercial and public safety coordination zone.

Code of Federal Regulations, 2011 CFR

2011-10-01

... safety coordinator. (1) The description must include, at a minimum; (i) The frequency or frequencies on... 47 Telecommunication 2 2011-10-01 2011-10-01 false Upper 700 MHz commercial and public safety... Rules for WCS § 27.303 Upper 700 MHz commercial and public safety coordination zone. (a) General. CMRS...

78 FR 19002 - Marine Mammal Protection Act; Draft Revised Stock Assessment Reports for Two Stocks of West...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-28

... optimum sustainable population level (OSP). OSP is defined under the MMPA as '' * * * the number of animals which will result in the maximum productivity of the population or the species, keeping in mind... include: 1. A description of the stock and its geographic range; 2. A minimum population estimate, maximum...

76 FR 38374 - Applications for New Awards; Literacy Information and Communication System Regional Professional...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-30

... members of groups that have traditionally been underrepresented based on race, color, national origin... than two five-day AEPD sessions using Learning to Achieve \\10\\ for a minimum of 40 adult educators from... outcomes for years two and three of the project period. (d) A description of how progress on each project...

Wyeomyia (Prosopolepis) Confusa (Lutz): Subgeneric Validation, Species Description, and Recognition of Wyeomyia Flui (Bonne-Wepster and Bonne) as the Senior Synonym of Wyeomyia Kerri Del Ponte and Cerqueira

DTIC Science & Technology

1999-01-01

Short, length about 0.5 mm; widest at base, tapering distally; index 2.5-3.3 (width mea- sured at base); lightly and evenly tanned. Pecten with 3-9...compressed and expanded distally, with hooked tip. Segment X: Saddle incomplete; lightly tanned; length about 0.25 mm, siphon/saddle index about...cylindrical; index about 3.6 (2.5-4.1) (width measured at midlength). Ab- domen: Lightly tanned, anterior margins of sterna II-VI noticeably darker; length

Some Pitfalls in Special Relativity

ERIC Educational Resources Information Center

Chai, An-Ti

1973-01-01

The problem of observing a collision between two spaceships is utilized to illustrate the misuse of time dilation and length contraction, and the incorrect description of space-time coordinates in special relativity. (Author/DF)

Travelers' Health: Cruise Ship Travel

MedlinePlus

... Motion Sickness ). PRECAUTIONS FOR CRUISE SHIP TRAVELERS Pretravel Evaluate the type and length of the planned cruise ... Peake DE, Gray CL, Ludwig MR, Hill CD. Descriptive epidemiology of injury and illness among cruise ship ...

Sunspot Activity Near Cycle Minimum and What it Might Suggest for Cycle 24, the Next Sunspot Cycle

NASA Technical Reports Server (NTRS)

Wilson, Robert M.; Hathaway, David H.

2009-01-01

In late 2008, 12-month moving averages of sunspot number, number of spotless days, number of groups, area of sunspots, and area per group were reflective of sunspot cycle minimum conditions for cycle 24, these values being of or near record value. The first spotless day occurred in January 2004 and the first new-cycle, high-latitude spot was reported in January 2008, although old-cycle, low-latitude spots have continued to be seen through April 2009, yielding an overlap of old and new cycle spots of at least 16 mo. New-cycle spots first became dominant over old-cycle spots in September 2008. The minimum value of the weighted mean latitude of sunspots occurred in May 2007, measuring 6.6 deg, and the minimum value of the highest-latitude spot followed in June 2007, measuring 11.7 deg. A cycle length of at least 150 mo is inferred for cycle 23, making it the longest cycle of the modern era. Based on both the maximum-minimum and amplitude-period relationships, cycle 24 is expected to be only of average to below-average size, peaking probably in late 2012 to early 2013, unless it proves to be a statistical outlier.

Combined AIE/EBE/GMRES approach to incompressible flows. [Adaptive Implicit-Explicit/Grouped Element-by-Element/Generalized Minimum Residuals

NASA Technical Reports Server (NTRS)

Liou, J.; Tezduyar, T. E.

1990-01-01

Adaptive implicit-explicit (AIE), grouped element-by-element (GEBE), and generalized minimum residuals (GMRES) solution techniques for incompressible flows are combined. In this approach, the GEBE and GMRES iteration methods are employed to solve the equation systems resulting from the implicitly treated elements, and therefore no direct solution effort is involved. The benchmarking results demonstrate that this approach can substantially reduce the CPU time and memory requirements in large-scale flow problems. Although the description of the concepts and the numerical demonstration are based on the incompressible flows, the approach presented here is applicable to larger class of problems in computational mechanics.

Quiet Short-Haul Research Airplane (QSRA) model select panel functional description

NASA Technical Reports Server (NTRS)

Watson, D. M.

1982-01-01

The QSRA, when equipped with programmable color cathode ray tube displays, a head up display, a general purpose digital computer and a microwave landing system receiver, will provide a capability to do handling qualities studies and terminal area operating systems experiments as well as to enhance an experimenter's ability to obtain repeatable aircraft performance data. The operating systems experiments include the capability to generate minimum fuel approach and departure paths and to conduct precision approaches to a STOLport runway. The mode select panel is designed to provide both the flexibility needed for a variety of flight test experiments and the minimum workload operation required by pilots flying into congested terminal traffic areas.

Abdominal girth and vertebral column length can adjust spinal anesthesia for lower limb surgery, a prospective, observational study.

PubMed

Zhou, Qing-he; Zhu, Bo; Wei, Chang-na; Yan, Min

2016-03-24

Studies have shown that abdominal girth and vertebral column length have high predictive value for spinal spread after administering a dose of plain bupivacaine. we designed a study to identify the specific correlations between abdominal girth, vertebral column length and a 0.5% dosage of plain bupivacaine, which should provide a minimum upper block level (T12) and a suitable upper block level (T10) for lower limb surgeries. A suitable dose of 0.5% plain bupivacaine was administered intrathecally between the L3 and L4 vertebrae for lower limb surgeries. If the upper cephalad spread of the patient by loss of pinprick discrimination was T12 or T10, the patient was enrolled in this study. Five patient variables and intrathecal plain bupivacaine dose were recorded. Linear regression and multiple regression analyses were performed. Totals of 111 patients and 121 patients who lost pinprick discrimination at T12 and T10, respectively, were analyzed in this study. Linear regression analysis showed that only abdominal girth and plain bupivacaine dose were strongly correlated (r =-0.827 for T12, r = -0.806 for T10; both p < 0.0001). Multiple linear regression analysis showed that both abdominal girth and vertebral column length were the key determinants of plain bupivacaine dose (both p < 0.0001). R(2) was 0.874 and 0.860 for the loss of pinprick discrimination at T12 and T10, respectively. Our data indicated that vertebral column length and abdominal girth were strongly correlated with the dosage of intrathecal plain bupivacaine for the loss of pinprick discrimination at T12 and T10. The two regression equations were YT12 = 3.547 + 0.045X1-0.044X2 and YT10 = 3.848 + 0.047X1- 0.046X2 (Y, 0.5% plain bupivacaine volume; X1, vertebral column length;and X 2, abdominal girth), which can accurately predict the minimum and suitable intrathecal bupivacaine dose for lower limb surgery to a great extent, separately.

Age structure and mortality of walleyes in Kansas reservoirs: Use of mortality caps to establish realistic management objectives

USGS Publications Warehouse

Quist, M.C.; Stephen, J.L.; Guy, C.S.; Schultz, R.D.

2004-01-01

Age structure, total annual mortality, and mortality caps (maximum mortality thresholds established by managers) were investigated for walleye Sander vitreus (formerly Stizostedion vitreum) populations sampled from eight Kansas reservoirs during 1991-1999. We assessed age structure by examining the relative frequency of different ages in the population; total annual mortality of age-2 and older walleyes was estimated by use of a weighted catch curve. To evaluate the utility of mortality caps, we modeled threshold values of mortality by varying growth rates and management objectives. Estimated mortality thresholds were then compared with observed growth and mortality rates. The maximum age of walleyes varied from 5 to 11 years across reservoirs. Age structure was dominated (???72%) by walleyes age 3 and younger in all reservoirs, corresponding to ages that were not yet vulnerable to harvest. Total annual mortality rates varied from 40.7% to 59.5% across reservoirs and averaged 51.1% overall (SE = 2.3). Analysis of mortality caps indicated that a management objective of 500 mm for the mean length of walleyes harvested by anglers was realistic for all reservoirs with a 457-mm minimum length limit but not for those with a 381-mm minimum length limit. For a 500-mm mean length objective to be realized for reservoirs with a 381-mm length limit, managers must either reduce mortality rates (e.g., through restrictive harvest regulations) or increase growth of walleyes. When the assumed objective was to maintain the mean length of harvested walleyes at current levels, the observed annual mortality rates were below the mortality cap for all reservoirs except one. Mortality caps also provided insight on management objectives expressed in terms of proportional stock density (PSD). Results indicated that a PSD objective of 20-40 was realistic for most reservoirs. This study provides important walleye mortality information that can be used for monitoring or for inclusion into population models; these results can also be combined with those of other studies to investigate large-scale differences in walleye mortality. Our analysis illustrates the utility of mortality caps for monitoring walleye populations and for establishing realistic management goals.

Method for estimating potential tree-grade distributions for northeastern forest species

Treesearch

Daniel A. Yaussy; Daniel A. Yaussy

1993-01-01

Generalized logistic regression was used to distribute trees into four potential tree grades for 20 northeastern species groups. The potential tree grade is defined as the tree grade based on the length and amount of clear cuttings and defects only, disregarding minimum grading diameter. The algorithms described use site index and tree diameter as the predictive...

29 CFR 1926.251 - Rigging equipment for material handling.

Code of Federal Regulations, 2013 CFR

2013-07-01

... splices, the U-bolt shall be applied so that the “U” section is in contact with the dead end of the rope... laid grommets and endless slings shall have a minimum circumferential length of 96 times their body... be tapered and spliced into the body of the rope using at least two additional tucks (which will...

29 CFR 1926.251 - Rigging equipment for material handling.

Code of Federal Regulations, 2014 CFR

2014-07-01

... splices, the U-bolt shall be applied so that the “U” section is in contact with the dead end of the rope... laid grommets and endless slings shall have a minimum circumferential length of 96 times their body... be tapered and spliced into the body of the rope using at least two additional tucks (which will...

Number of Instructional Days/Hours in the School Year

ERIC Educational Resources Information Center

Rowland, Julie

2014-01-01

While state requirements vary on the number of instructional days and/or hours in the school year, the majority of states require 180 days of student instruction. Most also specify the minimum length of time that constitutes an instructional day. Some states set instructional time in terms of days, some specify hours, and some provide…

Banach spaces that realize minimal fillings

NASA Astrophysics Data System (ADS)

Bednov, B. B.; Borodin, P. A.

2014-04-01

It is proved that a real Banach space realizes minimal fillings for all its finite subsets (a shortest network spanning a fixed finite subset always exists and has the minimum possible length) if and only if it is a predual of L_1. The spaces L_1 are characterized in terms of Steiner points (medians). Bibliography: 25 titles.

FASTER 3: A generalized-geometry Monte Carlo computer program for the transport of neutrons and gamma rays. Volume 2: Users manual

NASA Technical Reports Server (NTRS)

Jordan, T. M.

1970-01-01

A description of the FASTER-III program for Monte Carlo Carlo calculation of photon and neutron transport in complex geometries is presented. Major revisions include the capability of calculating minimum weight shield configurations for primary and secondary radiation and optimal importance sampling parameters. The program description includes a users manual describing the preparation of input data cards, the printout from a sample problem including the data card images, definitions of Fortran variables, the program logic, and the control cards required to run on the IBM 7094, IBM 360, UNIVAC 1108 and CDC 6600 computers.

On the prospect of using butterfly diagrams to predict cycle minimum

NASA Technical Reports Server (NTRS)

Wilson, Robert M.

1987-01-01

Features enabling the prediction of the beginning and the length of a solar cycle, in addition to the turning points in the period-growth dichotomy, have been identified based on butterfly diagrams for the period from 1874 to the present. The present results indicate that cycle 21 will be a long-period cycle ending after July 1987. On the assumption that April 1985 was the first occurrence of high latitude new cycle (cycle 22) spots during the decline of cycle 21 (the old cycle), it is suggested that the last occurrence of high latitude old cycle spots was September 1983 and that the minimum for cycle 22 will be about 1986.7 + or - 1.1 yr.

Variable area nozzle including a plurality of convexly vanes with a crowned contour, in a vane to vane sealing arrangement and with nonuniform lengths

NASA Technical Reports Server (NTRS)

Arnold, Steven M. (Inventor); Penney, Nicholas (Inventor)

2008-01-01

A variable area nozzle comprising a concentric support and a plurality of convexly contoured self sealing vanes is disclosed and claimed. The vanes are circumferentially and rotatably mounted to the concentric support forming a nozzle infinitely positionable between a first position corresponding to a minimum area nozzle and a second position corresponding to a maximum area nozzle. A closer, which is preferably a shape memory alloy (SMA), urges the nozzle toward the first position corresponding to a minimum area nozzle. Periodically spaced openers act between adjacent vanes to urge the nozzle to a second position corresponding to a maximum area nozzle.

Assessing the readability of ClinicalTrials.gov

PubMed Central

Wu, Danny TY; Hanauer, David A; Mei, Qiaozhu; Clark, Patricia M; An, Lawrence C; Proulx, Joshua; Zeng, Qing T; Vydiswaran, VG Vinod; Collins-Thompson, Kevyn

2016-01-01

Objective ClinicalTrials.gov serves critical functions of disseminating trial information to the public and helping the trials recruit participants. This study assessed the readability of trial descriptions at ClinicalTrials.gov using multiple quantitative measures. Materials and Methods The analysis included all 165 988 trials registered at ClinicalTrials.gov as of April 30, 2014. To obtain benchmarks, the authors also analyzed 2 other medical corpora: (1) all 955 Health Topics articles from MedlinePlus and (2) a random sample of 100 000 clinician notes retrieved from an electronic health records system intended for conveying internal communication among medical professionals. The authors characterized each of the corpora using 4 surface metrics, and then applied 5 different scoring algorithms to assess their readability. The authors hypothesized that clinician notes would be most difficult to read, followed by trial descriptions and MedlinePlus Health Topics articles. Results Trial descriptions have the longest average sentence length (26.1 words) across all corpora; 65% of their words used are not covered by a basic medical English dictionary. In comparison, average sentence length of MedlinePlus Health Topics articles is 61% shorter, vocabulary size is 95% smaller, and dictionary coverage is 46% higher. All 5 scoring algorithms consistently rated CliniclTrials.gov trial descriptions the most difficult corpus to read, even harder than clinician notes. On average, it requires 18 years of education to properly understand these trial descriptions according to the results generated by the readability assessment algorithms. Discussion and Conclusion Trial descriptions at CliniclTrials.gov are extremely difficult to read. Significant work is warranted to improve their readability in order to achieve CliniclTrials.gov’s goal of facilitating information dissemination and subject recruitment. PMID:26269536

Monolithic coupling of a SU8 waveguide to a silicon photodiode

NASA Astrophysics Data System (ADS)

Nathan, M.; Levy, O.; Goldfarb, I.; Ruzin, A.

2003-12-01

We present quantitative results of light coupling from SU8 waveguides into silicon p-n photodiodes in monolithically integrated structures. Multimode, 12 μm thick, and 20 μm wide SU8 waveguides were fabricated to overlap 40×180 μm2 photodiodes, with three different waveguide-photodiode overlap lengths. The attenuation due to leaky-mode coupling in the overlap area was then calculated from photocurrent measurements. The overlap attenuation ranged from a minimum of 2.2 dB per mm overlap length to a maximum of about 3 dB/mm, comparing favorably with reported nonpolymeric waveguide-Si photodiode attenuations.

The K tree score: quantification of differences in the relative branch length and topology of phylogenetic trees.

PubMed

Soria-Carrasco, Víctor; Talavera, Gerard; Igea, Javier; Castresana, Jose

2007-11-01

We introduce a new phylogenetic comparison method that measures overall differences in the relative branch length and topology of two phylogenetic trees. To do this, the algorithm first scales one of the trees to have a global divergence as similar as possible to the other tree. Then, the branch length distance, which takes differences in topology and branch lengths into account, is applied to the two trees. We thus obtain the minimum branch length distance or K tree score. Two trees with very different relative branch lengths get a high K score whereas two trees that follow a similar among-lineage rate variation get a low score, regardless of the overall rates in both trees. There are several applications of the K tree score, two of which are explained here in more detail. First, this score allows the evaluation of the performance of phylogenetic algorithms, not only with respect to their topological accuracy, but also with respect to the reproduction of a given branch length variation. In a second example, we show how the K score allows the selection of orthologous genes by choosing those that better follow the overall shape of a given reference tree. http://molevol.ibmb.csic.es/Ktreedist.html

Investigation of dissipation elements in a fully developed turbulent channel flow by tomographic particle-image velocimetry

NASA Astrophysics Data System (ADS)

Schäfer, L.; Dierksheide, U.; Klaas, M.; Schröder, W.

2011-03-01

A new method to describe statistical information from passive scalar fields has been proposed by Wang and Peters ["The length-scale distribution function of the distance between extremal points in passive scalar turbulence," J. Fluid Mech. 554, 457 (2006)]. They used direct numerical simulations (DNS) of homogeneous shear flow to introduce the innovative concept. This novel method determines the local minimum and maximum points of the fluctuating scalar field via gradient trajectories, starting from every grid point in the direction of the steepest ascending and descending scalar gradients. Relying on gradient trajectories, a dissipation element is defined as the region of all the grid points, the trajectories of which share the same pair of maximum and minimum points. The procedure has also been successfully applied to various DNS fields of homogeneous shear turbulence using the three velocity components and the kinetic energy as scalar fields [L. Wang and N. Peters, "Length-scale distribution functions and conditional means for various fields in turbulence," J. Fluid Mech. 608, 113 (2008)]. In this spirit, dissipation elements are, for the first time, determined from experimental data of a fully developed turbulent channel flow. The dissipation elements are deduced from the gradients of the instantaneous fluctuation of the three velocity components u', v', and w' and the instantaneous kinetic energy k', respectively. The measurements are conducted at a Reynolds number of 1.7×104 based on the channel half-height δ and the bulk velocity U. The required three-dimensional velocity data are obtained investigating a 17.75×17.75×6 mm3 (0.355δ×0.355δ×0.12δ) test volume using tomographic particle-image velocimetry. Detection and analysis of dissipation elements from the experimental velocity data are discussed in detail. The statistical results are compared to the DNS data from Wang and Peters ["The length-scale distribution function of the distance between extremal points in passive scalar turbulence," J. Fluid Mech. 554, 457 (2006); "Length-scale distribution functions and conditional means for various fields in turbulence," J. Fluid Mech. 608, 113 (2008)]. Similar characteristics have been found especially for the pdf's of the large dissipation element length regarding the exponential decay. In agreement with the DNS results, over 99% of the experimental dissipation elements possess a length that is smaller than three times the average element length.

Defining worthwhile and desired responses to treatment of chronic low back pain.

PubMed

Yelland, Michael J; Schluter, Philip J

2006-01-01

To describe patients' perceptions of minimum worthwhile and desired reductions in pain and disability upon commencing treatment for chronic low back pain. Descriptive study nested within a community-based randomized controlled trial on prolotherapy injections and exercises. A total of 110 participants with chronic low back pain. Interventions. Prior to treatment, participants were asked what minimum percentage reductions in pain and disability would make treatment worthwhile and what percentage reductions in pain and disability they desired with treatment. Minimum worthwhile reductions and desired reductions in pain and disability. Median (inter-quartile range) minimum worthwhile reductions were 25% (20%, 50%) for pain and 35% (20%, 50%) for disability. This compared with desired reductions of 80% (60%, 100%) for pain and 80% (50%, 100%) for disability. The internal consistency between pain and disability responses was high (Spearman's coefficient of association of 0.81 and 0.87, respectively). A significant association existed between minimum worthwhile reductions and desired reductions, but no association was found between these two factors and patient age, gender, pain severity or duration, disability, anxiety, depression, response to treatment, or treatment satisfaction. Inquiring directly about patients' expectations of reductions in pain and in disability is important in establishing realistic treatment goals and setting benchmarks for success. There is a wide disparity between the reductions that they regard as minimum worthwhile and reductions that they hope to achieve. However, there is a high internal consistency between reductions in pain and disability that they expect.

Linking innovative measurement technologies (ConMon and Dataflow© systems) for high-resolution temporal and spatial dissolved oxygen criteria assessment.

PubMed

O'Leary, C A; Perry, E; Bayard, A; Wainger, L; Boynton, W R

2015-10-01

One consequence of nutrient-induced eutrophication in shallow estuarine waters is the occurrence of hypoxia and anoxia that has serious impacts on biota, habitats, and biogeochemical cycles of important elements. Because of the important role of dissolved oxygen (DO) on these ecosystem features, a variety of DO criteria have been established as indicators of system condition. However, DO dynamics are complex and vary on time scales ranging from diel to decadal and spatial scales from meters to multiple kilometers. Because of these complexities, determining DO criteria attainment or failure remains difficult. We propose a method for linking two common measurement technologies for shallow water DO criteria assessment using a Chesapeake Bay tributary as a test case. Dataflow© is a spatially intensive (30-60-m collection intervals) system used to map surface water conditions at the whole estuary scale, and ConMon is a high-frequency (15-min collection intervals) fixed station approach. The former technology is effective with spatial descriptions but poor regarding temporal resolution, while the latter provides excellent temporal but very limited spatial resolution. Our methodology for combining the strengths of these measurement technologies involved a sequence of steps. First, a statistical model of surface water DO dynamics, based on temporally intense ConMon data, was developed. The results of this model were used to calculate daily DO minimum concentrations. Second, this model was then inserted into Dataflow©-generated spatial maps of DO conditions and used to adjust measured DO concentrations to daily minimum concentrations. This information was used to assess DO criteria compliance at the full tributary scale. Model results indicated that it is vital to consider the short-term time scale DO criteria across both space and time concurrently. Large fluctuations in DO occurred within a 24-h time period, and DO dynamics varied across the length and width of the tributary. The overall result provided a more detailed and realistic characterization of the shallow water DO minimum conditions that have the potential to be extended to other tributaries and regions. Broader applications of this model include instantaneous DO criteria assessment, utilizing this model in combination with aerial remote sensing, and developing DO amplitude as an indicator of impaired water bodies.

Spontaneous knotting of an agitated string.

PubMed

Raymer, Dorian M; Smith, Douglas E

2007-10-16

It is well known that a jostled string tends to become knotted; yet the factors governing the "spontaneous" formation of various knots are unclear. We performed experiments in which a string was tumbled inside a box and found that complex knots often form within seconds. We used mathematical knot theory to analyze the knots. Above a critical string length, the probability P of knotting at first increased sharply with length but then saturated below 100%. This behavior differs from that of mathematical self-avoiding random walks, where P has been proven to approach 100%. Finite agitation time and jamming of the string due to its stiffness result in lower probability, but P approaches 100% with long, flexible strings. We analyzed the knots by calculating their Jones polynomials via computer analysis of digital photos of the string. Remarkably, almost all were identified as prime knots: 120 different types, having minimum crossing numbers up to 11, were observed in 3,415 trials. All prime knots with up to seven crossings were observed. The relative probability of forming a knot decreased exponentially with minimum crossing number and Möbius energy, mathematical measures of knot complexity. Based on the observation that long, stiff strings tend to form a coiled structure when confined, we propose a simple model to describe the knot formation based on random "braid moves" of the string end. Our model can qualitatively account for the observed distribution of knots and dependence on agitation time and string length.

Radio tag retention and tag-related mortality among adult sockeye salmon

USGS Publications Warehouse

Ramstad, Kristina M.; Woody, Carol Ann

2003-01-01

Tag retention and tag-related mortality are concerns for any tagging study but are rarely estimated. We assessed retention and mortality rates for esophageal radio tag implants in adult sockeye salmon Oncorhynchus nerka. Migrating sockeye salmon captured at the outlet of Lake Clark, Alaska, were implanted with one of four different radio tags (14.5 × 43 mm (diameter × length), 14.5 × 49 mm, 16 × 46 mm, and 19 × 51 mm). Fish were observed for 15 to 35 d after tagging to determine retention and mortality rates. The overall tag retention rate was high (0.98; 95% confidence interval (CI), 0.92-1.00; minimum, 33 d), with one loss of a 19-mm × 51- mm tag. Mortality of tagged sockeye salmon (0.02; 95% CI, 0-0.08) was similar to that of untagged controls (0.03 (0-0.15)). Sockeye salmon with body lengths (mid-eye to tail fork) of 585-649 mm retained tags as large as 19 × 51 mm and those with body lengths of 499-628 mm retained tags as small as 14.5 × 43 mm for a minimum of 33 d with no increase in mortality. The tags used in this study represent a suite of radio tags that vary in size, operational life, and cost but that are effective in tracking adult anadromous salmon with little tag loss or increase in fish mortality.

Optimal bladder diary duration for patients with suprapontine neurogenic lower urinary tract dysfunction.

PubMed

Konstantinidis, Charalampos; Kratiras, Zisis; Samarinas, Michael; Skriapas, Konstantinos

2016-01-01

To identify the minimum bladder diary's length required to furnish reliable documentation of LUTS in a specific cohort of patients suffering from neurogenic urinary dysfunction secondary to suprapontine pathology. From January 2008 to January 2014, patients suffering from suprapontine pathology and LUTS were requested to prospectively complete a bladder diary form for 7 consecutive days. Micturitions per day, excreta per micturition, urgency and incontinence episodes and voided volume per day were evaluated from the completed diaries. We compared the averaged records of consecutive days (2-6 days) to the total 7 days records for each patient's diary, seeking the minimum diary's length that could provide records comparable to the 7 days average, the reference point in terms of reliability. From 285 subjects, 94 male and 69 female patients enrolled in the study. The records of day 1 were significantly different from the average of the 7 days records in every parameter, showing relatively small correlation and providing insuficiente documentation. Correlations gradually increased along the increase in diary's duration. According to our results a 3-day duration bladder diary is efficient and can provide results comparable to a 7 day length for four of our evaluated parameters. Regarding incontinence episodes, 3 days seems inadequate to furnish comparable results, showing a borderline difference. A 3-day diary can be used, as its reliability is efficient regarding number of micturition per day, excreta per micturition, episodes of urgency and voided volume per day. Copyright© by the International Brazilian Journal of Urology.

Linear variability of gait according to socioeconomic status in elderly

PubMed Central

2016-01-01

Aim: To evaluate the linear variability of comfortable gait according to socioeconomic status in community-dwelling elderly. Method: For this cross-sectional observational study 63 self- functioning elderly were categorized according to the socioeconomic level on medium-low (n= 33, age 69.0 ± 5.0 years) and medium-high (n= 30, age 71.0 ± 6.0 years). Each participant was asked to perform comfortable gait speed for 3 min on an 40 meters elliptical circuit, recording in video five strides which were transformed into frames, determining the minimum foot clearance, maximum foot clearance and stride length. The intra-group linear variability was calculated by the coefficient of variation in percent. Results: The trajectory parameters variability is not different according to socioeconomic status with a 30% (range= 15-55%) for the minimum foot clearance and 6% (range= 3-8%) in maximum foot clearance. Meanwhile, the stride length consistently was more variable in the medium-low socioeconomic status for the overall sample (p= 0.004), female (p= 0.041) and male gender (p= 0.007), with values near 4% ​​(range = 2.5-5.0%) in the medium-low and 2% (range = 1.5-3.5%) in the medium-high. Conclusions: The intra-group linear variability is consistently higher and within reference parameters for stride length during comfortable gait for elderly belonging to medium-low socioeconomic status. This might be indicative of greater complexity and consequent motor adaptability. PMID:27546931

Wildfire simulation using a chemically-reacting plume in a crossflow

NASA Astrophysics Data System (ADS)

Breidenthal, Robert; Alvarado, Travis; Potter, Brian

2010-11-01

Water tunnel experiments reveal the flame length of a chemically-reacting plume in a crossflow. Salt water containing a pH indicator and a base is slowly injected from above into the test section of a water tunnel containing an acidic solution. The flame length is measured optically as a function of the buoyancy flux, crossflow speed, and volume equivalence ratio of the chemical reaction. Based on earlier work of Broadwell with the transverse jet, a simple dilution model predicts the flame length of the transverse plume. The plume observations are in accord with the model. As with the jet, there is a minimum in the flame length of the plume at a transition between two self-similar regimes, corresponding to the formation of a pair of counter-rotating vortices at a certain crossflow speed. At the transition, there is a maximum in the entrainment and mixing rates. In an actual wildfire with variable winds, this transition may correspond to a dangerous condition for firefighters.

Influence of Turbulent Flow and Fractal Scaling on Effective Permeability of Fracture Network

NASA Astrophysics Data System (ADS)

Zhu, J.

2017-12-01

A new approach is developed to calculate hydraulic gradient dependent effective permeability of a fractal fracture network where both laminar and turbulent flows may occur in individual fractures. A critical fracture length is used to distinguish flow characteristics in individual fractures. The developed new solutions can be used for the case of a general scaling relationship, an extension to the linear scaling. We examine the impact on the effective permeability of the network of fractal fracture network characteristics, which include the fractal scaling coefficient and exponent, fractal dimension, ratio of minimum over maximum fracture lengths. Results demonstrate that the developed solution can explain more variations of the effective permeability in relation to the fractal dimensions estimated from the field observations. At high hydraulic gradient the effective permeability decreases with the fractal scaling exponent, but increases with the fractal scaling exponent at low gradient. The effective permeability increases with the scaling coefficient, fractal dimension, fracture length ratio and maximum fracture length.

Collective motion in prolate γ-rigid nuclei within minimal length concept via a quantum perturbation method

NASA Astrophysics Data System (ADS)

Chabab, M.; El Batoul, A.; Lahbas, A.; Oulne, M.

2018-05-01

Based on the minimal length concept, inspired by Heisenberg algebra, a closed analytical formula is derived for the energy spectrum of the prolate γ-rigid Bohr-Mottelson Hamiltonian of nuclei, within a quantum perturbation method (QPM), by considering a scaled Davidson potential in β shape variable. In the resulting solution, called X(3)-D-ML, the ground state and the first β-band are all studied as a function of the free parameters. The fact of introducing the minimal length concept with a QPM makes the model very flexible and a powerful approach to describe nuclear collective excitations of a variety of vibrational-like nuclei. The introduction of scaling parameters in the Davidson potential enables us to get a physical minimum of this latter in comparison with previous works. The analysis of the corrected wave function, as well as the probability density distribution, shows that the minimal length parameter has a physical upper bound limit.

Resolving Dynamic Properties of Polymers through Coarse-Grained Computational Studies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Salerno, K. Michael; Agrawal, Anupriya; Perahia, Dvora

2016-02-05

Coupled length and time scales determine the dynamic behavior of polymers and underlie their unique viscoelastic properties. To resolve the long-time dynamics it is imperative to determine which time and length scales must be correctly modeled. In this paper, we probe the degree of coarse graining required to simultaneously retain significant atomistic details and access large length and time scales. The degree of coarse graining in turn sets the minimum length scale instrumental in defining polymer properties and dynamics. Using linear polyethylene as a model system, we probe how the coarse-graining scale affects the measured dynamics. Iterative Boltzmann inversion ismore » used to derive coarse-grained potentials with 2–6 methylene groups per coarse-grained bead from a fully atomistic melt simulation. We show that atomistic detail is critical to capturing large-scale dynamics. Finally, using these models we simulate polyethylene melts for times over 500 μs to study the viscoelastic properties of well-entangled polymer melts.« less

Optics of the ozone lidar ELSA

NASA Technical Reports Server (NTRS)

Porteneuve, J.

1992-01-01

In order to study the ozone layer in the Arctic, we have to define a new optical concept for a lidar. It was necessary to build a transportable system with a large collecting surface in a minimum of volume. It was too useful to have a multichannel receptor. A description of the Emettor Receptor System, collecting system, and analysis system is provided.

MEPSA: minimum energy pathway analysis for energy landscapes.

PubMed

Marcos-Alcalde, Iñigo; Setoain, Javier; Mendieta-Moreno, Jesús I; Mendieta, Jesús; Gómez-Puertas, Paulino

2015-12-01

From conformational studies to atomistic descriptions of enzymatic reactions, potential and free energy landscapes can be used to describe biomolecular systems in detail. However, extracting the relevant data of complex 3D energy surfaces can sometimes be laborious. In this article, we present MEPSA (Minimum Energy Path Surface Analysis), a cross-platform user friendly tool for the analysis of energy landscapes from a transition state theory perspective. Some of its most relevant features are: identification of all the barriers and minima of the landscape at once, description of maxima edge profiles, detection of the lowest energy path connecting two minima and generation of transition state theory diagrams along these paths. In addition to a built-in plotting system, MEPSA can save most of the generated data into easily parseable text files, allowing more versatile uses of MEPSA's output such as the generation of molecular dynamics restraints from a calculated path. MEPSA is freely available (under GPLv3 license) at: http://bioweb.cbm.uam.es/software/MEPSA/ CONTACT: pagomez@cbm.csic.es. Supplementary data are available at Bioinformatics online. © The Author 2015. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Geographic, geologic, and hydrologic summaries of intermontane basins of the northern Rocky Mountains, Montana

USGS Publications Warehouse

Kendy, Eloise; Tresch, R.E.

1996-01-01

This report combines a literature review with new information to provide summaries of the geography, geology, and hydrology of each of 32 intermontane basins in western Montana. The summary of each intermontane basin includes concise descriptions of topography, areal extent, altitude, climate, 1990 population, land and water use, geology, surface water, aquifer hydraulic characteristics, ground-water flow, and ground-water quality. If present, geothermal features are described. Average annual and monthly temperature and precipitation are reported from one National Weather Service station in each basin. Streamflow data, including the drainage area, period of record, and average, minimum, and maximum historical streamflow, are reported for all active and discontinued USGS streamflow-gaging stations in each basin. Monitoring-well data, including the well depth, aquifer, period of record, and minimum and maximum historical water levels, are reported for all long-term USGS monitoring wells in each basin. Brief descriptions of geologic, geophysical, and potentiometric- surface maps available for each basin also are included. The summary for each basin also includes a bibliography of hydrogeologic literature. When used alone or in conjunction with regional RASA reports, this report provides a practical starting point for site-specific hydrogeologic investigations.