Sample records for minimum distance property

  1. Rate-compatible protograph LDPC code families with linear minimum distance

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush (Inventor); Dolinar, Jr., Samuel J (Inventor); Jones, Christopher R. (Inventor)

    2012-01-01

    Digital communication coding methods are shown, which generate certain types of low-density parity-check (LDPC) codes built from protographs. A first method creates protographs having the linear minimum distance property and comprising at least one variable node with degree less than 3. A second method creates families of protographs of different rates, all having the linear minimum distance property, and structurally identical for all rates except for a rate-dependent designation of certain variable nodes as transmitted or non-transmitted. A third method creates families of protographs of different rates, all having the linear minimum distance property, and structurally identical for all rates except for a rate-dependent designation of the status of certain variable nodes as non-transmitted or set to zero. LDPC codes built from the protographs created by these methods can simultaneously have low error floors and low iterative decoding thresholds, and families of such codes of different rates can be decoded efficiently using a common decoding architecture.

  2. Construction of Protograph LDPC Codes with Linear Minimum Distance

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush; Dolinar, Sam; Jones, Christopher

    2006-01-01

    A construction method for protograph-based LDPC codes that simultaneously achieve low iterative decoding threshold and linear minimum distance is proposed. We start with a high-rate protograph LDPC code with variable node degrees of at least 3. Lower rate codes are obtained by splitting check nodes and connecting them by degree-2 nodes. This guarantees the linear minimum distance property for the lower-rate codes. Excluding checks connected to degree-1 nodes, we show that the number of degree-2 nodes should be at most one less than the number of checks for the protograph LDPC code to have linear minimum distance. Iterative decoding thresholds are obtained by using the reciprocal channel approximation. Thresholds are lowered by using either precoding or at least one very high-degree node in the base protograph. A family of high- to low-rate codes with minimum distance linearly increasing in block size and with capacity-approaching performance thresholds is presented. FPGA simulation results for a few example codes show that the proposed codes perform as predicted.

  3. Ensemble Weight Enumerators for Protograph LDPC Codes

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush

    2006-01-01

    Recently LDPC codes with projected graph, or protograph structures have been proposed. In this paper, finite length ensemble weight enumerators for LDPC codes with protograph structures are obtained. Asymptotic results are derived as the block size goes to infinity. In particular we are interested in obtaining ensemble average weight enumerators for protograph LDPC codes which have minimum distance that grows linearly with block size. As with irregular ensembles, linear minimum distance property is sensitive to the proportion of degree-2 variable nodes. In this paper the derived results on ensemble weight enumerators show that linear minimum distance condition on degree distribution of unstructured irregular LDPC codes is a sufficient but not a necessary condition for protograph LDPC codes.

  4. LDPC Codes with Minimum Distance Proportional to Block Size

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush; Jones, Christopher; Dolinar, Samuel; Thorpe, Jeremy

    2009-01-01

    Low-density parity-check (LDPC) codes characterized by minimum Hamming distances proportional to block sizes have been demonstrated. Like the codes mentioned in the immediately preceding article, the present codes are error-correcting codes suitable for use in a variety of wireless data-communication systems that include noisy channels. The previously mentioned codes have low decoding thresholds and reasonably low error floors. However, the minimum Hamming distances of those codes do not grow linearly with code-block sizes. Codes that have this minimum-distance property exhibit very low error floors. Examples of such codes include regular LDPC codes with variable degrees of at least 3. Unfortunately, the decoding thresholds of regular LDPC codes are high. Hence, there is a need for LDPC codes characterized by both low decoding thresholds and, in order to obtain acceptably low error floors, minimum Hamming distances that are proportional to code-block sizes. The present codes were developed to satisfy this need. The minimum Hamming distances of the present codes have been shown, through consideration of ensemble-average weight enumerators, to be proportional to code block sizes. As in the cases of irregular ensembles, the properties of these codes are sensitive to the proportion of degree-2 variable nodes. A code having too few such nodes tends to have an iterative decoding threshold that is far from the capacity threshold. A code having too many such nodes tends not to exhibit a minimum distance that is proportional to block size. Results of computational simulations have shown that the decoding thresholds of codes of the present type are lower than those of regular LDPC codes. Included in the simulations were a few examples from a family of codes characterized by rates ranging from low to high and by thresholds that adhere closely to their respective channel capacity thresholds; the simulation results from these examples showed that the codes in question have low error floors as well as low decoding thresholds. As an example, the illustration shows the protograph (which represents the blueprint for overall construction) of one proposed code family for code rates greater than or equal to 1.2. Any size LDPC code can be obtained by copying the protograph structure N times, then permuting the edges. The illustration also provides Field Programmable Gate Array (FPGA) hardware performance simulations for this code family. In addition, the illustration provides minimum signal-to-noise ratios (Eb/No) in decibels (decoding thresholds) to achieve zero error rates as the code block size goes to infinity for various code rates. In comparison with the codes mentioned in the preceding article, these codes have slightly higher decoding thresholds.

  5. 27 CFR 555.218 - Table of distances for storage of explosive materials.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... with traffic volume of more than 3,000 vehicles/day Barricaded Unbarricaded Separation of magazines... explosive materials are defined in § 555.11. (2) When two or more storage magazines are located on the same property, each magazine must comply with the minimum distances specified from inhabited buildings, railways...

  6. Protograph LDPC Codes with Node Degrees at Least 3

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush; Jones, Christopher

    2006-01-01

    In this paper we present protograph codes with a small number of degree-3 nodes and one high degree node. The iterative decoding threshold for proposed rate 1/2 codes are lower, by about 0.2 dB, than the best known irregular LDPC codes with degree at least 3. The main motivation is to gain linear minimum distance to achieve low error floor. Also to construct rate-compatible protograph-based LDPC codes for fixed block length that simultaneously achieves low iterative decoding threshold and linear minimum distance. We start with a rate 1/2 protograph LDPC code with degree-3 nodes and one high degree node. Higher rate codes are obtained by connecting check nodes with degree-2 non-transmitted nodes. This is equivalent to constraint combining in the protograph. The condition where all constraints are combined corresponds to the highest rate code. This constraint must be connected to nodes of degree at least three for the graph to have linear minimum distance. Thus having node degree at least 3 for rate 1/2 guarantees linear minimum distance property to be preserved for higher rates. Through examples we show that the iterative decoding threshold as low as 0.544 dB can be achieved for small protographs with node degrees at least three. A family of low- to high-rate codes with minimum distance linearly increasing in block size and with capacity-approaching performance thresholds is presented. FPGA simulation results for a few example codes show that the proposed codes perform as predicted.

  7. Minimum distance classification in remote sensing

    NASA Technical Reports Server (NTRS)

    Wacker, A. G.; Landgrebe, D. A.

    1972-01-01

    The utilization of minimum distance classification methods in remote sensing problems, such as crop species identification, is considered. Literature concerning both minimum distance classification problems and distance measures is reviewed. Experimental results are presented for several examples. The objective of these examples is to: (a) compare the sample classification accuracy of a minimum distance classifier, with the vector classification accuracy of a maximum likelihood classifier, and (b) compare the accuracy of a parametric minimum distance classifier with that of a nonparametric one. Results show the minimum distance classifier performance is 5% to 10% better than that of the maximum likelihood classifier. The nonparametric classifier is only slightly better than the parametric version.

  8. Fuzzy scalar and vector median filters based on fuzzy distances.

    PubMed

    Chatzis, V; Pitas, I

    1999-01-01

    In this paper, the fuzzy scalar median (FSM) is proposed, defined by using ordering of fuzzy numbers based on fuzzy minimum and maximum operations defined by using the extension principle. Alternatively, the FSM is defined from the minimization of a fuzzy distance measure, and the equivalence of the two definitions is proven. Then, the fuzzy vector median (FVM) is proposed as an extension of vector median, based on a novel distance definition of fuzzy vectors, which satisfy the property of angle decomposition. By defining properly the fuzziness of a value, the combination of the basic properties of the classical scalar and vector median (VM) filter with other desirable characteristics can be succeeded.

  9. Potential energy function for CH3+CH3 ⇆ C2H6: Attributes of the minimum energy path

    NASA Astrophysics Data System (ADS)

    Robertson, S. H.; Wardlaw, D. M.; Hirst, D. M.

    1993-11-01

    The region of the potential energy surface for the title reaction in the vicinity of its minimum energy path has been predicted from the analysis of ab initio electronic energy calculations. The ab initio procedure employs a 6-31G** basis set and a configuration interaction calculation which uses the orbitals obtained in a generalized valence bond calculation. Calculated equilibrium properties of ethane and of isolated methyl radical are compared to existing theoretical and experimental results. The reaction coordinate is represented by the carbon-carbon interatomic distance. The following attributes are reported as a function of this distance and fit to functional forms which smoothly interpolate between reactant and product values of each attribute: the minimum energy path potential, the minimum energy path geometry, normal mode frequencies for vibrational motion orthogonal to the reaction coordinate, a torsional potential, and a fundamental anharmonic frequency for local mode, out-of-plane CH3 bending (umbrella motion). The best representation is provided by a three-parameter modified Morse function for the minimum energy path potential and a two-parameter hyperbolic tangent switching function for all other attributes. A poorer but simpler representation, which may be satisfactory for selected applications, is provided by a standard Morse function and a one-parameter exponential switching function. Previous applications of the exponential switching function to estimate the reaction coordinate dependence of the frequencies and geometry of this system have assumed the same value of the range parameter α for each property and have taken α to be less than or equal to the ``standard'' value of 1.0 Å-1. Based on the present analysis this is incorrect: The α values depend on the property and range from ˜1.2 to ˜1.8 Å-1.

  10. Transverse Stress Decay in a Specially Orthotropic Strip Under Localizing Normal Edge Loading

    NASA Technical Reports Server (NTRS)

    Fichter, W. B.

    2000-01-01

    Solutions are presented for the stresses in a specially orthotropic infinite strip which is subjected to localized uniform normal loading on one edge while the other edge is either restrained against normal displacement only, or completely fixed. The solutions are used to investigate the diffusion of load into the strip and in particular the decay of normal stress across the width of the strip. For orthotropic strips representative of a broad range of balanced and symmetric angle-ply composite laminates, minimum strip widths are found that ensure at least 90% decay of the normal stress across the strip. In addition, in a few cases where, on the fixed edge the peak shear stress exceeds the normal stress in magnitude, minimum strip widths that ensure 90% decay of both stresses are found. To help in putting these results into perspective, and to illustrate the influence of material properties on load 9 orthotropic materials, closed-form solutions for the stresses in similarly loaded orthotropic half-planes are obtained. These solutions are used to generate illustrative stress contour plots for several representative laminates. Among the laminates, those composed of intermediate-angle plies, i.e., from about 30 degrees to 60 degrees, exhibit marked changes in normal stress contour shape with stress level. The stress contours are also used to find 90% decay distances in the half-planes. In all cases, the minimum strip widths for 90% decay of the normal stress exceed the 90% decay distances in the corresponding half-planes, in amounts ranging from only a few percent to about 50% of the half-plane decay distances. The 90% decay distances depend on both material properties and the boundary conditions on the supported edge.

  11. Rate-compatible protograph LDPC code families with linear minimum distance

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush (Inventor); Dolinar, Jr., Samuel J. (Inventor); Jones, Christopher R. (Inventor)

    2012-01-01

    Digital communication coding methods are shown, which generate certain types of low-density parity-check (LDPC) codes built from protographs. A first method creates protographs having the linear minimum distance property and comprising at least one variable node with degree less than 3. A second method creates families of protographs of different rates, all structurally identical for all rates except for a rate-dependent designation of certain variable nodes as transmitted or non-transmitted. A third method creates families of protographs of different rates, all structurally identical for all rates except for a rate-dependent designation of the status of certain variable nodes as non-transmitted or set to zero. LDPC codes built from the protographs created by these methods can simultaneously have low error floors and low iterative decoding thresholds.

  12. A training image evaluation and selection method based on minimum data event distance for multiple-point geostatistics

    NASA Astrophysics Data System (ADS)

    Feng, Wenjie; Wu, Shenghe; Yin, Yanshu; Zhang, Jiajia; Zhang, Ke

    2017-07-01

    A training image (TI) can be regarded as a database of spatial structures and their low to higher order statistics used in multiple-point geostatistics (MPS) simulation. Presently, there are a number of methods to construct a series of candidate TIs (CTIs) for MPS simulation based on a modeler's subjective criteria. The spatial structures of TIs are often various, meaning that the compatibilities of different CTIs with the conditioning data are different. Therefore, evaluation and optimal selection of CTIs before MPS simulation is essential. This paper proposes a CTI evaluation and optimal selection method based on minimum data event distance (MDevD). In the proposed method, a set of MDevD properties are established through calculation of the MDevD of conditioning data events in each CTI. Then, CTIs are evaluated and ranked according to the mean value and variance of the MDevD properties. The smaller the mean value and variance of an MDevD property are, the more compatible the corresponding CTI is with the conditioning data. In addition, data events with low compatibility in the conditioning data grid can be located to help modelers select a set of complementary CTIs for MPS simulation. The MDevD property can also help to narrow the range of the distance threshold for MPS simulation. The proposed method was evaluated using three examples: a 2D categorical example, a 2D continuous example, and an actual 3D oil reservoir case study. To illustrate the method, a C++ implementation of the method is attached to the paper.

  13. Complex networks in the Euclidean space of communicability distances

    NASA Astrophysics Data System (ADS)

    Estrada, Ernesto

    2012-06-01

    We study the properties of complex networks embedded in a Euclidean space of communicability distances. The communicability distance between two nodes is defined as the difference between the weighted sum of walks self-returning to the nodes and the weighted sum of walks going from one node to the other. We give some indications that the communicability distance identifies the least crowded routes in networks where simultaneous submission of packages is taking place. We define an index Q based on communicability and shortest path distances, which allows reinterpreting the “small-world” phenomenon as the region of minimum Q in the Watts-Strogatz model. It also allows the classification and analysis of networks with different efficiency of spatial uses. Consequently, the communicability distance displays unique features for the analysis of complex networks in different scenarios.

  14. Rate-Compatible Protograph LDPC Codes

    NASA Technical Reports Server (NTRS)

    Nguyen, Thuy V. (Inventor); Nosratinia, Aria (Inventor); Divsalar, Dariush (Inventor)

    2014-01-01

    Digital communication coding methods resulting in rate-compatible low density parity-check (LDPC) codes built from protographs. Described digital coding methods start with a desired code rate and a selection of the numbers of variable nodes and check nodes to be used in the protograph. Constraints are set to satisfy a linear minimum distance growth property for the protograph. All possible edges in the graph are searched for the minimum iterative decoding threshold and the protograph with the lowest iterative decoding threshold is selected. Protographs designed in this manner are used in decode and forward relay channels.

  15. The minimum distance approach to classification

    NASA Technical Reports Server (NTRS)

    Wacker, A. G.; Landgrebe, D. A.

    1971-01-01

    The work to advance the state-of-the-art of miminum distance classification is reportd. This is accomplished through a combination of theoretical and comprehensive experimental investigations based on multispectral scanner data. A survey of the literature for suitable distance measures was conducted and the results of this survey are presented. It is shown that minimum distance classification, using density estimators and Kullback-Leibler numbers as the distance measure, is equivalent to a form of maximum likelihood sample classification. It is also shown that for the parametric case, minimum distance classification is equivalent to nearest neighbor classification in the parameter space.

  16. Covalence of atoms in the heavier transition metals*

    PubMed Central

    Pauling, Linus

    1977-01-01

    The observed magnetic properties of the heavier transition metals permit them to have larger metallic valences than their iron-group congeners. With 0.72 metallic orbital, as found for the iron-group metals, the maximum metallic valence and minimum interatomic distance would occur for 8.28 transargononic electrons. The curves of observed interatomic distances for the close-packed metals of the second and third long periods have minima at this point, supporting the assignment of high valences to these metals. Values of the single-bond radii corresponding to these valences are calculated. PMID:16592407

  17. Influence of Natural Fractures Cohesive Properties on Geometry of Hydraulic Fracture Networks

    NASA Astrophysics Data System (ADS)

    Gonzalez-Chavez, M. A.; Dahi Taleghani, A.; Puyang, P.

    2014-12-01

    An integrated modeling methodology is proposed to analyze hydraulic fracturing jobs in the presence of the natural fracture network in the formation. A propagating hydraulic fracture may arrest, cross, or diverts into a preexisting natural crack depending on fracture properties of rock and magnitude and direction of principal rock stresses. Opening of natural fractures during fracturing treatment could define the effectiveness of the stimulation technique. Here, we present an integrated methodology initiated with lab scale fracturing properties using Double Cantilever Beam tests (DCB) to determine cohesive properties of rock and natural fractures. We used cohesive finite element models to reproduce laboratory results to verify the numerical model for the interaction of the hydraulic fracture and individual cemented natural fractures. Based on the initial investigations, we found out that distribution of pre-existing natural fractures could play a significant role in the final geometry of the induced fracture network; however in practice, there is not much information about the distribution of natural fractures in the subsurface due to the limited access. Hence, we propose a special optimization scheme to generate natural fracture geometry from the location of microseismic events. Accordingly, the criteria of evaluating the fitness of natural fracture realizations is defined as the total minimum distance squares of all microseismic events, which is the sum of minimum square distance for all microseismic events. Moreover, an additional constraint in this problem is that we need to set a minimum distance between fracture grids. Using generated natural fracture realizations, forward field-scale simulations are implemented using cohesive finite element analysis to find the best match with the recorded bottomhole pressure. To show the robustness of the proposed workflow for real field problem, we implemented this technique on available data from several well Chicontepec basin to forecast post-treatment production rate. Our results show a constructive approach to integrate microseismic maps with lab mechanical measurements and bottomhole pressure to estimate the geometry of induced fracture network in the subsurface which does not suffer from any limiting assumption about fracture geometries.

  18. Non-polarizable force field of water based on the dielectric constant: TIP4P/ε.

    PubMed

    Fuentes-Azcatl, Raúl; Alejandre, José

    2014-02-06

    The static dielectric constant at room temperature and the temperature of maximum density are used as target properties to develop, by molecular dynamics simulations, the TIP4P/ε force field of water. The TIP4P parameters are used as a starting point. The key step, to determine simultaneously both properties, is to perform simulations at 240 K where a molecular dipole moment of minimum density is found. The minimum is shifted to larger values of μ as the distance between the oxygen atom and site M, lOM, decreases. First, the parameters that define the dipole moment are adjusted to reproduce the experimental dielectric constant and then the Lennard-Jones parameters are varied to match the temperature of maximum density. The minimum on density at 240 K allows understanding why reported TIP4P models fail to reproduce the temperature of maximum density, the dielectric constant, or both properties. The new model reproduces some of the thermodynamic and transport anomalies of water. Additionally, the dielectric constant, thermodynamics, and dynamical and structural properties at different temperatures and pressures are in excellent agreement with experimental data. The computational cost of the new model is the same as that of the TIP4P.

  19. Tableau Calculus for the Logic of Comparative Similarity over Arbitrary Distance Spaces

    NASA Astrophysics Data System (ADS)

    Alenda, Régis; Olivetti, Nicola

    The logic CSL (first introduced by Sheremet, Tishkovsky, Wolter and Zakharyaschev in 2005) allows one to reason about distance comparison and similarity comparison within a modal language. The logic can express assertions of the kind "A is closer/more similar to B than to C" and has a natural application to spatial reasoning, as well as to reasoning about concept similarity in ontologies. The semantics of CSL is defined in terms of models based on different classes of distance spaces and it generalizes the logic S4 u of topological spaces. In this paper we consider CSL defined over arbitrary distance spaces. The logic comprises a binary modality to represent comparative similarity and a unary modality to express the existence of the minimum of a set of distances. We first show that the semantics of CSL can be equivalently defined in terms of preferential models. As a consequence we obtain the finite model property of the logic with respect to its preferential semantic, a property that does not hold with respect to the original distance-space semantics. Next we present an analytic tableau calculus based on its preferential semantics. The calculus provides a decision procedure for the logic, its termination is obtained by imposing suitable blocking restrictions.

  20. Effect of Weight Transfer on a Vehicle's Stopping Distance.

    ERIC Educational Resources Information Center

    Whitmire, Daniel P.; Alleman, Timothy J.

    1979-01-01

    An analysis of the minimum stopping distance problem is presented taking into account the effect of weight transfer on nonskidding vehicles and front- or rear-wheels-skidding vehicles. Expressions for the minimum stopping distances are given in terms of vehicle geometry and the coefficients of friction. (Author/BB)

  1. New upper bounds on the rate of a code via the Delsarte-MacWilliams inequalities

    NASA Technical Reports Server (NTRS)

    Mceliece, R. J.; Rodemich, E. R.; Rumsey, H., Jr.; Welch, L. R.

    1977-01-01

    An upper bound on the rate of a binary code as a function of minimum code distance (using a Hamming code metric) is arrived at from Delsarte-MacWilliams inequalities. The upper bound so found is asymptotically less than Levenshtein's bound, and a fortiori less than Elias' bound. Appendices review properties of Krawtchouk polynomials and Q-polynomials utilized in the rigorous proofs.

  2. The Minimum Binding Energy and Size of Doubly Muonic D3 Molecule

    NASA Astrophysics Data System (ADS)

    Eskandari, M. R.; Faghihi, F.; Mahdavi, M.

    The minimum energy and size of doubly muonic D3 molecule, which two of the electrons are replaced by the much heavier muons, are calculated by the well-known variational method. The calculations show that the system possesses two minimum positions, one at typically muonic distance and the second at the atomic distance. It is shown that at the muonic distance, the effective charge, zeff is 2.9. We assumed a symmetric planar vibrational model between two minima and an oscillation potential energy is approximated in this region.

  3. The evaluation of alternate methodologies for land cover classification in an urbanizing area

    NASA Technical Reports Server (NTRS)

    Smekofski, R. M.

    1981-01-01

    The usefulness of LANDSAT in classifying land cover and in identifying and classifying land use change was investigated using an urbanizing area as the study area. The question of what was the best technique for classification was the primary focus of the study. The many computer-assisted techniques available to analyze LANDSAT data were evaluated. Techniques of statistical training (polygons from CRT, unsupervised clustering, polygons from digitizer and binary masks) were tested with minimum distance to the mean, maximum likelihood and canonical analysis with minimum distance to the mean classifiers. The twelve output images were compared to photointerpreted samples, ground verified samples and a current land use data base. Results indicate that for a reconnaissance inventory, the unsupervised training with canonical analysis-minimum distance classifier is the most efficient. If more detailed ground truth and ground verification is available, the polygons from the digitizer training with the canonical analysis minimum distance is more accurate.

  4. DETERMINING MINIMUM IGNITION ENERGIES AND QUENCHING DISTANCES OF DIFFICULT-TO-IGNITE COMPOUNDS

    EPA Science Inventory

    Minimum spark energies and corresponding flat-plate electrode quenching distances required to initiate propagation of a combustion wave have been experimentally measured for four flammable hydrofluorocarbon (HFC) refrigerants and propane using ASTM (American Society for Testing a...

  5. Three-dimensional modeling and animation of two carpal bones: a technique.

    PubMed

    Green, Jason K; Werner, Frederick W; Wang, Haoyu; Weiner, Marsha M; Sacks, Jonathan M; Short, Walter H

    2004-05-01

    The objectives of this study were to (a). create 3D reconstructions of two carpal bones from single CT data sets and animate these bones with experimental in vitro motion data collected during dynamic loading of the wrist joint, (b). develop a technique to calculate the minimum interbone distance between the two carpal bones, and (c). validate the interbone distance calculation process. This method utilized commercial software to create the animations and an in-house program to interface with three-dimensional CAD software to calculate the minimum distance between the irregular geometries of the bones. This interbone minimum distance provides quantitative information regarding the motion of the bones studied and may help to understand and quantify the effects of ligamentous injury.

  6. 41 CFR 302-4.704 - Must we require a minimum driving distance per day?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... Federal Travel Regulation System RELOCATION ALLOWANCES PERMANENT CHANGE OF STATION (PCS) ALLOWANCES FOR... driving distance not less than an average of 300 miles per day. However, an exception to the daily minimum... reasons acceptable to you. ...

  7. Distance estimation and collision prediction for on-line robotic motion planning

    NASA Technical Reports Server (NTRS)

    Kyriakopoulos, K. J.; Saridis, G. N.

    1991-01-01

    An efficient method for computing the minimum distance and predicting collisions between moving objects is presented. This problem has been incorporated in the framework of an in-line motion planning algorithm to satisfy collision avoidance between a robot and moving objects modeled as convex polyhedra. In the beginning the deterministic problem, where the information about the objects is assumed to be certain is examined. If instead of the Euclidean norm, L(sub 1) or L(sub infinity) norms are used to represent distance, the problem becomes a linear programming problem. The stochastic problem is formulated, where the uncertainty is induced by sensing and the unknown dynamics of the moving obstacles. Two problems are considered: (1) filtering of the minimum distance between the robot and the moving object, at the present time; and (2) prediction of the minimum distance in the future, in order to predict possible collisions with the moving obstacles and estimate the collision time.

  8. Communication scheme based on evolutionary spatial 2×2 games

    NASA Astrophysics Data System (ADS)

    Ziaukas, Pranas; Ragulskis, Tautvydas; Ragulskis, Minvydas

    2014-06-01

    A visual communication scheme based on evolutionary spatial 2×2 games is proposed in this paper. Self-organizing patterns induced by complex interactions between competing individuals are exploited for hiding and transmitting secret visual information. Properties of the proposed communication scheme are discussed in details. It is shown that the hiding capacity of the system (the minimum size of the detectable primitives and the minimum distance between two primitives) is sufficient for the effective transmission of digital dichotomous images. Also, it is demonstrated that the proposed communication scheme is resilient to time backwards, plain image attacks and is highly sensitive to perturbations of private and public keys. Several computational experiments are used to demonstrate the effectiveness of the proposed communication scheme.

  9. Multi-level bandwidth efficient block modulation codes

    NASA Technical Reports Server (NTRS)

    Lin, Shu

    1989-01-01

    The multilevel technique is investigated for combining block coding and modulation. There are four parts. In the first part, a formulation is presented for signal sets on which modulation codes are to be constructed. Distance measures on a signal set are defined and their properties are developed. In the second part, a general formulation is presented for multilevel modulation codes in terms of component codes with appropriate Euclidean distances. The distance properties, Euclidean weight distribution and linear structure of multilevel modulation codes are investigated. In the third part, several specific methods for constructing multilevel block modulation codes with interdependency among component codes are proposed. Given a multilevel block modulation code C with no interdependency among the binary component codes, the proposed methods give a multilevel block modulation code C which has the same rate as C, a minimum squared Euclidean distance not less than that of code C, a trellis diagram with the same number of states as that of C and a smaller number of nearest neighbor codewords than that of C. In the last part, error performance of block modulation codes is analyzed for an AWGN channel based on soft-decision maximum likelihood decoding. Error probabilities of some specific codes are evaluated based on their Euclidean weight distributions and simulation results.

  10. Maximum Likelihood and Minimum Distance Applied to Univariate Mixture Distributions.

    ERIC Educational Resources Information Center

    Wang, Yuh-Yin Wu; Schafer, William D.

    This Monte-Carlo study compared modified Newton (NW), expectation-maximization algorithm (EM), and minimum Cramer-von Mises distance (MD), used to estimate parameters of univariate mixtures of two components. Data sets were fixed at size 160 and manipulated by mean separation, variance ratio, component proportion, and non-normality. Results…

  11. 47 CFR 73.807 - Minimum distance separation between stations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... and the right-hand column lists (for informational purposes only) the minimum distance necessary for...) Within 320 km of the Mexican border, LP100 stations must meet the following separations with respect to any Mexican stations: Mexican station class Co-channel (km) First-adjacent channel (km) Second-third...

  12. Comparing Phylogenetic Trees by Matching Nodes Using the Transfer Distance Between Partitions

    PubMed Central

    Giaro, Krzysztof

    2017-01-01

    Abstract Ability to quantify dissimilarity of different phylogenetic trees describing the relationship between the same group of taxa is required in various types of phylogenetic studies. For example, such metrics are used to assess the quality of phylogeny construction methods, to define optimization criteria in supertree building algorithms, or to find horizontal gene transfer (HGT) events. Among the set of metrics described so far in the literature, the most commonly used seems to be the Robinson–Foulds distance. In this article, we define a new metric for rooted trees—the Matching Pair (MP) distance. The MP metric uses the concept of the minimum-weight perfect matching in a complete bipartite graph constructed from partitions of all pairs of leaves of the compared phylogenetic trees. We analyze the properties of the MP metric and present computational experiments showing its potential applicability in tasks related to finding the HGT events. PMID:28177699

  13. Comparing Phylogenetic Trees by Matching Nodes Using the Transfer Distance Between Partitions.

    PubMed

    Bogdanowicz, Damian; Giaro, Krzysztof

    2017-05-01

    Ability to quantify dissimilarity of different phylogenetic trees describing the relationship between the same group of taxa is required in various types of phylogenetic studies. For example, such metrics are used to assess the quality of phylogeny construction methods, to define optimization criteria in supertree building algorithms, or to find horizontal gene transfer (HGT) events. Among the set of metrics described so far in the literature, the most commonly used seems to be the Robinson-Foulds distance. In this article, we define a new metric for rooted trees-the Matching Pair (MP) distance. The MP metric uses the concept of the minimum-weight perfect matching in a complete bipartite graph constructed from partitions of all pairs of leaves of the compared phylogenetic trees. We analyze the properties of the MP metric and present computational experiments showing its potential applicability in tasks related to finding the HGT events.

  14. Impact of the reduced vertical separation minimum on the domestic United States

    DOT National Transportation Integrated Search

    2009-01-31

    Aviation regulatory bodies have enacted the reduced vertical separation minimum standard over most of the globe. The reduced vertical separation minimum is a technique that reduces the minimum vertical separation distance between aircraft from 2000 t...

  15. Online Distance Teaching of Undergraduate Finance: A Case for Musashi University and Konan University, Japan

    ERIC Educational Resources Information Center

    Kubota, Keiichi; Fujikawa, Kiyoshi

    2007-01-01

    We implemented a synchronous distance course entitled: Introductory Finance designed for undergraduate students. This course was held between two Japanese universities. Stable Internet connections allowing minimum delay and minimum interruptions of the audio-video streaming signals were used. Students were equipped with their own PCs with…

  16. Establishment of a center of excellence for applied mathematical and statistical research

    NASA Technical Reports Server (NTRS)

    Woodward, W. A.; Gray, H. L.

    1983-01-01

    The state of the art was assessed with regards to efforts in support of the crop production estimation problem and alternative generic proportion estimation techniques were investigated. Topics covered include modeling the greeness profile (Badhwarmos model), parameter estimation using mixture models such as CLASSY, and minimum distance estimation as an alternative to maximum likelihood estimation. Approaches to the problem of obtaining proportion estimates when the underlying distributions are asymmetric are examined including the properties of Weibull distribution.

  17. Interspecific geographic range size-body size relationship and the diversification dynamics of Neotropical furnariid birds.

    PubMed

    Inostroza-Michael, Oscar; Hernández, Cristián E; Rodríguez-Serrano, Enrique; Avaria-Llautureo, Jorge; Rivadeneira, Marcelo M

    2018-05-01

    Among the earliest macroecological patterns documented, is the range and body size relationship, characterized by a minimum geographic range size imposed by the species' body size. This boundary for the geographic range size increases linearly with body size and has been proposed to have implications in lineages evolution and conservation. Nevertheless, the macroevolutionary processes involved in the origin of this boundary and its consequences on lineage diversification have been poorly explored. We evaluate the macroevolutionary consequences of the difference (hereafter the distance) between the observed and the minimum range sizes required by the species' body size, to untangle its role on the diversification of a Neotropical species-rich bird clade using trait-dependent diversification models. We show that speciation rate is a positive hump-shaped function of the distance to the lower boundary. The species with highest and lowest distances to minimum range size had lower speciation rates, while species close to medium distances values had the highest speciation rates. Further, our results suggest that the distance to the minimum range size is a macroevolutionary constraint that affects the diversification process responsible for the origin of this macroecological pattern in a more complex way than previously envisioned. © 2018 The Author(s). Evolution © 2018 The Society for the Study of Evolution.

  18. On the minimum orbital intersection distance computation: a new effective method

    NASA Astrophysics Data System (ADS)

    Hedo, José M.; Ruíz, Manuel; Peláez, Jesús

    2018-06-01

    The computation of the Minimum Orbital Intersection Distance (MOID) is an old, but increasingly relevant problem. Fast and precise methods for MOID computation are needed to select potentially hazardous asteroids from a large catalogue. The same applies to debris with respect to spacecraft. An iterative method that strictly meets these two premises is presented.

  19. Reading Skill and the Minimum Distance Principle: A Comparison of Sentence Comprehension in Context and in Isolation.

    ERIC Educational Resources Information Center

    Goldman, Susan R.

    The comprehension of the Minimum Distance Principle was examined in three experiments, using the "tell/promise" sentence construction. Experiment one compared the listening and reading comprehension of singly presented sentences, e.g. "John tells Bill to bake the cake" and "John promises Bill to bake the cake." The…

  20. 30 CFR 77.807-3 - Movement of equipment; minimum distance from high-voltage lines.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... high-voltage lines. 77.807-3 Section 77.807-3 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... WORK AREAS OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.807-3 Movement of equipment; minimum distance from high-voltage lines. When any part of any equipment operated on the surface of any...

  1. 30 CFR 77.807-2 - Booms and masts; minimum distance from high-voltage lines.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ...-voltage lines. 77.807-2 Section 77.807-2 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... WORK AREAS OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.807-2 Booms and masts; minimum distance from high-voltage lines. The booms and masts of equipment operated on the surface of any...

  2. Protograph based LDPC codes with minimum distance linearly growing with block size

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush; Jones, Christopher; Dolinar, Sam; Thorpe, Jeremy

    2005-01-01

    We propose several LDPC code constructions that simultaneously achieve good threshold and error floor performance. Minimum distance is shown to grow linearly with block size (similar to regular codes of variable degree at least 3) by considering ensemble average weight enumerators. Our constructions are based on projected graph, or protograph, structures that support high-speed decoder implementations. As with irregular ensembles, our constructions are sensitive to the proportion of degree-2 variable nodes. A code with too few such nodes tends to have an iterative decoding threshold that is far from the capacity threshold. A code with too many such nodes tends to not exhibit a minimum distance that grows linearly in block length. In this paper we also show that precoding can be used to lower the threshold of regular LDPC codes. The decoding thresholds of the proposed codes, which have linearly increasing minimum distance in block size, outperform that of regular LDPC codes. Furthermore, a family of low to high rate codes, with thresholds that adhere closely to their respective channel capacity thresholds, is presented. Simulation results for a few example codes show that the proposed codes have low error floors as well as good threshold SNFt performance.

  3. A canonical stability-elasticity relationship verified for one million face-centred-cubic structures.

    PubMed

    Maisel, Sascha B; Höfler, Michaela; Müller, Stefan

    2012-11-29

    Any thermodynamically stable or metastable phase corresponds to a local minimum of a potentially very complicated energy landscape. But however complex the crystal might be, this energy landscape is of parabolic shape near its minima. Roughly speaking, the depth of this energy well with respect to some reference level determines the thermodynamic stability of the system, and the steepness of the parabola near its minimum determines the system's elastic properties. Although changing alloying elements and their concentrations in a given material to enhance certain properties dates back to the Bronze Age, the systematic search for desirable properties in metastable atomic configurations at a fixed stoichiometry is a very recent tool in materials design. Here we demonstrate, using first-principles studies of four binary alloy systems, that the elastic properties of face-centred-cubic intermetallic compounds obey certain rules. We reach two conclusions based on calculations on a huge subset of the face-centred-cubic configuration space. First, the stiffness and the heat of formation are negatively correlated with a nearly constant Spearman correlation for all concentrations. Second, the averaged stiffness of metastable configurations at a fixed concentration decays linearly with their distance to the ground-state line (the phase diagram of an alloy at zero Kelvin). We hope that our methods will help to simplify the quest for new materials with optimal properties from the vast configuration space available.

  4. 24 CFR 200.933 - Changes in minimum property standards.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... Register. As the changes are made, they will be incorporated into the volumes of the Minimum Property... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Changes in minimum property... Changes in minimum property standards. Changes in the Minimum Property Standards will generally be made...

  5. 24 CFR 200.933 - Changes in minimum property standards.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Register. As the changes are made, they will be incorporated into the volumes of the Minimum Property... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Changes in minimum property... Changes in minimum property standards. Changes in the Minimum Property Standards will generally be made...

  6. Molecular markers for establishing distinctness in vegetatively propagated crops: a case study in grapevine.

    PubMed

    Ibáñez, Javier; Vélez, M Dolores; de Andrés, M Teresa; Borrego, Joaquín

    2009-11-01

    Distinctness, uniformity and stability (DUS) testing of varieties is usually required to apply for Plant Breeders' Rights. This exam is currently carried out using morphological traits, where the establishment of distinctness through a minimum distance is the key issue. In this study, the possibility of using microsatellite markers for establishing the minimum distance in a vegetatively propagated crop (grapevine) has been evaluated. A collection of 991 accessions have been studied with nine microsatellite markers and pair-wise compared, and the highest intra-variety distance and the lowest inter-variety distance determined. The collection included 489 different genotypes, and synonyms and sports. Average values for number of alleles per locus (19), Polymorphic Information Content (0.764) and heterozygosities observed (0.773) and expected (0.785) indicated the high level of polymorphism existing in grapevine. The maximum intra-variety variability found was one allele between two accessions of the same variety, of a total of 3,171 pair-wise comparisons. The minimum inter-variety variability found was two alleles between two pairs of varieties, of a total of 119,316 pair-wise comparisons. In base to these results, the minimum distance required to set distinctness in grapevine with the nine microsatellite markers used could be established in two alleles. General rules for the use of the system as a support for establishing distinctness in vegetatively propagated crops are discussed.

  7. Electrofishing distance needed to estimate consistent Index of Biotic Integrity (IBI) scores in raftable Oregon rivers

    EPA Science Inventory

    An important issue surrounding assessment of riverine fish assemblages is the minimum amount of sampling distance needed to adequately determine biotic condition. Determining adequate sampling distance is important because sampling distance affects estimates of fish assemblage c...

  8. New presentation method for magnetic resonance angiography images based on skeletonization

    NASA Astrophysics Data System (ADS)

    Nystroem, Ingela; Smedby, Orjan

    2000-04-01

    Magnetic resonance angiography (MRA) images are usually presented as maximum intensity projections (MIP), and the choice of viewing direction is then critical for the detection of stenoses. We propose a presentation method that uses skeletonization and distance transformations, which visualizes variations in vessel width independent of viewing direction. In the skeletonization, the object is reduced to a surface skeleton and further to a curve skeleton. The skeletal voxels are labeled with their distance to the original background. For the curve skeleton, the distance values correspond to the minimum radius of the object at that point, i.e., half the minimum diameter of the blood vessel at that level. The following image processing steps are performed: resampling to cubic voxels, segmentation of the blood vessels, skeletonization ,and reverse distance transformation on the curve skeleton. The reconstructed vessels may be visualized with any projection method. Preliminary results are shown. They indicate that locations of possible stenoses may be identified by presenting the vessels as a structure with the minimum radius at each point.

  9. Hybrid Stochastic Models for Remaining Lifetime Prognosis

    DTIC Science & Technology

    2004-08-01

    literature for techniques and comparisons. Os- ogami and Harchol-Balter [70], Perros [73], Johnson [36], and Altiok [5] provide excellent summaries of...and type of PH-distribution approximation for c2 > 0.5 is not as obvious. In order to use the minimum distance estimation, Perros [73] indicated that...moment-matching techniques. Perros [73] indicated that the maximum likelihood and minimum distance techniques require nonlinear optimization. Johnson

  10. Obstructions to the realization of distance graphs with large chromatic numbers on spheres of small radii

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kupavskii, A B; Raigorodskii, A M

    2013-10-31

    We investigate in detail some properties of distance graphs constructed on the integer lattice. Such graphs find wide applications in problems of combinatorial geometry, in particular, such graphs were employed to answer Borsuk's question in the negative and to obtain exponential estimates for the chromatic number of the space. This work is devoted to the study of the number of cliques and the chromatic number of such graphs under certain conditions. Constructions of sequences of distance graphs are given, in which the graphs have unit length edges and contain a large number of triangles that lie on a sphere of radius 1/√3more » (which is the minimum possible). At the same time, the chromatic numbers of the graphs depend exponentially on their dimension. The results of this work strengthen and generalize some of the results obtained in a series of papers devoted to related issues. Bibliography: 29 titles.« less

  11. Deriving the number of jobs in proximity services from the number of inhabitants in French rural municipalities.

    PubMed

    Lenormand, Maxime; Huet, Sylvie; Deffuant, Guillaume

    2012-01-01

    We use a minimum requirement approach to derive the number of jobs in proximity services per inhabitant in French rural municipalities. We first classify the municipalities according to their time distance in minutes by car to the municipality where the inhabitants go the most frequently to get services (called MFM). For each set corresponding to a range of time distance to MFM, we perform a quantile regression estimating the minimum number of service jobs per inhabitant that we interpret as an estimation of the number of proximity jobs per inhabitant. We observe that the minimum number of service jobs per inhabitant is smaller in small municipalities. Moreover, for municipalities of similar sizes, when the distance to the MFM increases, the number of jobs of proximity services per inhabitant increases.

  12. Effects of open drainage ditch design on bacterial and fungal communities of cold waterlogged paddy soils

    PubMed Central

    Qiu, Shanlian; Wang, MK; Wang, Fei; Chen, Jichen; Li, Xiaoyan; Li, Qinghua; Lin, Cheng; Lin, Xinjian

    2013-01-01

    A field experiment established in 1980 was conducted to evaluate the effects of open drainage ditch applied for water removal on bacterial and fungal communities of cold waterlogged paddy soils in 2011. In this experiment, traditional plate counting and temperature gradient gel electrophoresis were employed to characterize the abundance and diversity of soil bacterial and fungal communities. Four different distances from the open drainage ditch, 5, 15, 25 and 75 m with different degrees of drainage were designed for this study. Maximum populations of culturable aerobic bacteria and fungi were at 15-m distance while minimum populations were at 75-m distance. Significant differences (p < 0.05) in fungal populations were observed at all distances from open drainage ditch. The highest diversity of the bacterial community was found at a distance of 25 m, while that of the fungal community was observed at a distance of 5 m. Sequencing of excised TGGE bands indicated that the dominant bacteria at 75-m distance belonged to anaerobic or microaerobic bacteria. Relationships between microbial characteristics and soil physicochemical properties indicated that soil pH and available nitrogen contents were key factors controlling the abundance of culturable aerobic bacteria and fungi, while soil water capacity also affected the diversity of fungal community. These findings can provide the references for better design and advanced management of the drainage ditches in cold waterlogged paddy soils. PMID:24516468

  13. Reliability Based Geometric Design of Horizontal Circular Curves

    NASA Astrophysics Data System (ADS)

    Rajbongshi, Pabitra; Kalita, Kuldeep

    2018-06-01

    Geometric design of horizontal circular curve primarily involves with radius of the curve and stopping sight distance at the curve section. Minimum radius is decided based on lateral thrust exerted on the vehicles and the minimum stopping sight distance is provided to maintain the safety in longitudinal direction of vehicles. Available sight distance at site can be regulated by changing the radius and middle ordinate at the curve section. Both radius and sight distance depend on design speed. Speed of vehicles at any road section is a variable parameter and therefore, normally the 98th percentile speed is taken as the design speed. This work presents a probabilistic approach for evaluating stopping sight distance, considering the variability of all input parameters of sight distance. It is observed that the 98th percentile sight distance value is much lower than the sight distance corresponding to 98th percentile speed. The distribution of sight distance parameter is also studied and found to follow a lognormal distribution. Finally, the reliability based design charts are presented for both plain and hill regions, and considering the effect of lateral thrust.

  14. A unique concept for automatically controlling the braking action of wheeled vehicles during minimum distance stops

    NASA Technical Reports Server (NTRS)

    Barthlome, D. E.

    1975-01-01

    Test results of a unique automatic brake control system are outlined and a comparison is made of its mode of operation to that of an existing skid control system. The purpose of the test system is to provide automatic control of braking action such that hydraulic brake pressure is maintained at a near constant, optimum value during minimum distance stops.

  15. Distance estimation and collision prediction for on-line robotic motion planning

    NASA Technical Reports Server (NTRS)

    Kyriakopoulos, K. J.; Saridis, G. N.

    1992-01-01

    An efficient method for computing the minimum distance and predicting collisions between moving objects is presented. This problem is incorporated into the framework of an in-line motion-planning algorithm to satisfy collision avoidance between a robot and moving objects modeled as convex polyhedra. In the beginning, the deterministic problem where the information about the objects is assumed to be certain is examined. L(1) or L(infinity) norms are used to represent distance and the problem becomes a linear programming problem. The stochastic problem is formulated where the uncertainty is induced by sensing and the unknown dynamics of the moving obstacles. Two problems are considered: First, filtering of the distance between the robot and the moving object at the present time. Second, prediction of the minimum distance in the future in order to predict the collision time.

  16. Disk Density Tuning of a Maximal Random Packing

    PubMed Central

    Ebeida, Mohamed S.; Rushdi, Ahmad A.; Awad, Muhammad A.; Mahmoud, Ahmed H.; Yan, Dong-Ming; English, Shawn A.; Owens, John D.; Bajaj, Chandrajit L.; Mitchell, Scott A.

    2016-01-01

    We introduce an algorithmic framework for tuning the spatial density of disks in a maximal random packing, without changing the sizing function or radii of disks. Starting from any maximal random packing such as a Maximal Poisson-disk Sampling (MPS), we iteratively relocate, inject (add), or eject (remove) disks, using a set of three successively more-aggressive local operations. We may achieve a user-defined density, either more dense or more sparse, almost up to the theoretical structured limits. The tuned samples are conflict-free, retain coverage maximality, and, except in the extremes, retain the blue noise randomness properties of the input. We change the density of the packing one disk at a time, maintaining the minimum disk separation distance and the maximum domain coverage distance required of any maximal packing. These properties are local, and we can handle spatially-varying sizing functions. Using fewer points to satisfy a sizing function improves the efficiency of some applications. We apply the framework to improve the quality of meshes, removing non-obtuse angles; and to more accurately model fiber reinforced polymers for elastic and failure simulations. PMID:27563162

  17. Disk Density Tuning of a Maximal Random Packing.

    PubMed

    Ebeida, Mohamed S; Rushdi, Ahmad A; Awad, Muhammad A; Mahmoud, Ahmed H; Yan, Dong-Ming; English, Shawn A; Owens, John D; Bajaj, Chandrajit L; Mitchell, Scott A

    2016-08-01

    We introduce an algorithmic framework for tuning the spatial density of disks in a maximal random packing, without changing the sizing function or radii of disks. Starting from any maximal random packing such as a Maximal Poisson-disk Sampling (MPS), we iteratively relocate, inject (add), or eject (remove) disks, using a set of three successively more-aggressive local operations. We may achieve a user-defined density, either more dense or more sparse, almost up to the theoretical structured limits. The tuned samples are conflict-free, retain coverage maximality, and, except in the extremes, retain the blue noise randomness properties of the input. We change the density of the packing one disk at a time, maintaining the minimum disk separation distance and the maximum domain coverage distance required of any maximal packing. These properties are local, and we can handle spatially-varying sizing functions. Using fewer points to satisfy a sizing function improves the efficiency of some applications. We apply the framework to improve the quality of meshes, removing non-obtuse angles; and to more accurately model fiber reinforced polymers for elastic and failure simulations.

  18. 49 CFR 175.706 - Separation distances for undeveloped film from packages containing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... 49 Transportation 2 2014-10-01 2014-10-01 false Separation distances for undeveloped film from... Classification of Material § 175.706 Separation distances for undeveloped film from packages containing Class 7... film. Transport index Minimum separation distance to nearest undeveloped film for various times in...

  19. 49 CFR 175.706 - Separation distances for undeveloped film from packages containing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Separation distances for undeveloped film from... Classification of Material § 175.706 Separation distances for undeveloped film from packages containing Class 7... film. Transport index Minimum separation distance to nearest undeveloped film for various times in...

  20. 49 CFR 175.706 - Separation distances for undeveloped film from packages containing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... 49 Transportation 2 2013-10-01 2013-10-01 false Separation distances for undeveloped film from... Classification of Material § 175.706 Separation distances for undeveloped film from packages containing Class 7... film. Transport index Minimum separation distance to nearest undeveloped film for various times in...

  1. 49 CFR 175.706 - Separation distances for undeveloped film from packages containing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 49 Transportation 2 2012-10-01 2012-10-01 false Separation distances for undeveloped film from... Classification of Material § 175.706 Separation distances for undeveloped film from packages containing Class 7... film. Transport index Minimum separation distance to nearest undeveloped film for various times in...

  2. 49 CFR 175.706 - Separation distances for undeveloped film from packages containing Class 7 (radioactive) materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Separation distances for undeveloped film from... Classification of Material § 175.706 Separation distances for undeveloped film from packages containing Class 7... film. Transport index Minimum separation distance to nearest undeveloped film for various times in...

  3. Minimum separation distances for natural gas pipeline and boilers in the 300 area, Hanford Site

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Daling, P.M.; Graham, T.M.

    1997-08-01

    The U.S. Department of Energy (DOE) is proposing actions to reduce energy expenditures and improve energy system reliability at the 300 Area of the Hanford Site. These actions include replacing the centralized heating system with heating units for individual buildings or groups of buildings, constructing a new natural gas distribution system to provide a fuel source for many of these units, and constructing a central control building to operate and maintain the system. The individual heating units will include steam boilers that are to be housed in individual annex buildings located at some distance away from nearby 300 Area nuclearmore » facilities. This analysis develops the basis for siting the package boilers and natural gas distribution systems to be used to supply steam to 300 Area nuclear facilities. The effects of four potential fire and explosion scenarios involving the boiler and natural gas pipeline were quantified to determine minimum separation distances that would reduce the risks to nearby nuclear facilities. The resulting minimum separation distances are shown in Table ES.1.« less

  4. Continuum Mean-Field Theories for Molecular Fluids, and Their Validity at the Nanoscale

    NASA Astrophysics Data System (ADS)

    Hanna, C. B.; Peyronel, F.; MacDougall, C.; Marangoni, A.; Pink, D. A.; AFMNet-NCE Collaboration

    2011-03-01

    We present a calculation of the physical properties of solid triglyceride particles dispersed in an oil phase, using atomic- scale molecular dynamics. Significant equilibrium density oscillations in the oil appear when the interparticle distance, d , becomes sufficiently small, with a global minimum in the free energy found at d ~ 1.4 nm. We compare the simulation values of the Hamaker coefficient with those of models which assume that the oil is a homogeneous continuum: (i) Lifshitz theory, (ii) the Fractal Model, and (iii) a Lennard-Jones 6-12 potential model. The last-named yields a minimum in the free energy at d ~ 0.26 nm. We conclude that, at the nanoscale, continuum Lifshitz theory and other continuum mean-field theories based on the assumption of homogeneous fluid density can lead to erroneous conclusions. CBH supported by NSF DMR-0906618. DAP supported by NSERC. This work supported by AFMNet-NCE.

  5. 30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...

  6. 30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...

  7. 30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...

  8. 30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...

  9. Spatial variability in airborne pollen concentrations.

    PubMed

    Raynor, G S; Ogden, E C; Hayes, J V

    1975-03-01

    Tests were conducted to determine the relationship between airborne pollen concentrations and distance. Simultaneous samples were taken in 171 tests with sets of eight rotoslide samplers spaced from one to 486 M. apart in straight lines. Use of all possible pairs gave 28 separation distances. Tests were conducted over a 2-year period in urban and rural locations distant from major pollen sources during both tree and ragweed pollen seasons. Samples were taken at a height of 1.5 M. during 5-to 20-minute periods. Tests were grouped by pollen type, location, year, and direction of the wind relative to the line. Data were analyzed to evaluate variability without regard to sampler spacing and variability as a function of separation distance. The mean, standard deviation, coefficient of variation, ratio of maximum to the mean, and ratio of minimum to the mean were calculated for each test, each group of tests, and all cases. The average coefficient of variation is 0.21, the maximum over the mean, 1.39 and the minimum over the mean, 0.69. No relationship was found with experimental conditions. Samples taken at the minimum separation distance had a mean difference of 18 per cent. Differences between pairs of samples increased with distance in 10 of 13 groups. These results suggest that airborne pollens are not always well mixed in the lower atmosphere and that a sample becomes less representative with increasing distance from the sampling location.

  10. Precipitation in a lead calcium tin anode

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Perez-Gonzalez, Francisco A., E-mail: fco.aurelio@inbox.com; Centro de Innovacion, Investigacion y Desarrollo en Ingenieria y Tecnologia, Universidad Autonoma de Nuevo Leon; Camurri, Carlos G., E-mail: ccamurri@udec.cl

    Samples from a hot rolled sheet of a tin and calcium bearing lead alloy were solution heat treated at 300 Degree-Sign C and cooled down to room temperature at different rates; these samples were left at room temperature to study natural precipitation of CaSn{sub 3} particles. The samples were aged for 45 days before analysing their microstructure, which was carried out in a scanning electron microscope using secondary and backscattered electron detectors. Selected X-ray spectra analyses were conducted to verify the nature of the precipitates. Images were taken at different magnifications in both modes of observation to locate the precipitatesmore » and record their position within the images and calculate the distance between them. Differential scanning calorimeter analyses were conducted on selected samples. It was found that the mechanical properties of the material correlate with the minimum average distance between precipitates, which is related to the average cooling rate from solution heat treatment. - Highlights: Black-Right-Pointing-Pointer The distance between precipitates in a lead alloy is recorded. Black-Right-Pointing-Pointer The relationship between the distance and the cooling rate is established. Black-Right-Pointing-Pointer It is found that the strengthening of the alloy depends on the distance between precipitates.« less

  11. Investigation of primordial black hole bursts using interplanetary network gamma-ray bursts

    DOE PAGES

    Ukwatta, Tilan Niranjan; Hurley, Kevin; MacGibbon, Jane H.; ...

    2016-07-25

    The detection of a gamma-ray burst (GRB) in the solar neighborhood would have very important implications for GRB phenomenology. The leading theories for cosmological GRBs would not be able to explain such events. The final bursts of evaporating primordial black holes (PBHs), however, would be a natural explanation for local GRBs. We present a novel technique that can constrain the distance to GRBs using detections from widely separated, non-imaging spacecraft. This method can determine the actual distance to the burst if it is local. We applied this method to constrain distances to a sample of 36 short-duration GRBs detected bymore » the Interplanetary Network (IPN) that show observational properties that are expected from PBH evaporations. These bursts have minimum possible distances in the 10 13–10 18 cm (7–10 5 au) range, which are consistent with the expected PBH energetics and with a possible origin in the solar neighborhood, although none of the bursts can be unambiguously demonstrated to be local. Furthermore, assuming that these bursts are real PBH events, we estimate lower limits on the PBH burst evaporation rate in the solar neighborhood.« less

  12. 75 FR 37825 - Notice of Proposed Information Collection: Comment Request; Minimum Property Standards for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-06-30

    ... Information Collection: Comment Request; Minimum Property Standards for Multifamily and Care-Type Facilities...: Minimum Property Standards for Multifamily and Care-type facilities. OMB Control Number, if applicable... Housing and Urban Development (HUD) developed the Minimum Property Standards (MPS) program in order to...

  13. 49 CFR 176.708 - Segregation distances.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 49 Transportation 2 2011-10-01 2011-10-01 false Segregation distances. 176.708 Section 176.708... Requirements for Radioactive Materials § 176.708 Segregation distances. (a) Table IV lists minimum separation... into account any relocation of cargo during the voyage. (e) Any departure from the segregation...

  14. Land management practices associated with house loss in wildfires.

    PubMed

    Gibbons, Philip; van Bommel, Linda; Gill, A Malcolm; Cary, Geoffrey J; Driscoll, Don A; Bradstock, Ross A; Knight, Emma; Moritz, Max A; Stephens, Scott L; Lindenmayer, David B

    2012-01-01

    Losses to life and property from unplanned fires (wildfires) are forecast to increase because of population growth in peri-urban areas and climate change. In response, there have been moves to increase fuel reduction--clearing, prescribed burning, biomass removal and grazing--to afford greater protection to peri-urban communities in fire-prone regions. But how effective are these measures? Severe wildfires in southern Australia in 2009 presented a rare opportunity to address this question empirically. We predicted that modifying several fuels could theoretically reduce house loss by 76%-97%, which would translate to considerably fewer wildfire-related deaths. However, maximum levels of fuel reduction are unlikely to be feasible at every house for logistical and environmental reasons. Significant fuel variables in a logistic regression model we selected to predict house loss were (in order of decreasing effect): (1) the cover of trees and shrubs within 40 m of houses, (2) whether trees and shrubs within 40 m of houses was predominantly remnant or planted, (3) the upwind distance from houses to groups of trees or shrubs, (4) the upwind distance from houses to public forested land (irrespective of whether it was managed for nature conservation or logging), (5) the upwind distance from houses to prescribed burning within 5 years, and (6) the number of buildings or structures within 40 m of houses. All fuel treatments were more effective if undertaken closer to houses. For example, 15% fewer houses were destroyed if prescribed burning occurred at the observed minimum distance from houses (0.5 km) rather than the observed mean distance from houses (8.5 km). Our results imply that a shift in emphasis away from broad-scale fuel-reduction to intensive fuel treatments close to property will more effectively mitigate impacts from wildfires on peri-urban communities.

  15. Land Management Practices Associated with House Loss in Wildfires

    PubMed Central

    Gibbons, Philip; van Bommel, Linda; Gill, A. Malcolm; Cary, Geoffrey J.; Driscoll, Don A.; Bradstock, Ross A.; Knight, Emma; Moritz, Max A.; Stephens, Scott L.; Lindenmayer, David B.

    2012-01-01

    Losses to life and property from unplanned fires (wildfires) are forecast to increase because of population growth in peri-urban areas and climate change. In response, there have been moves to increase fuel reduction—clearing, prescribed burning, biomass removal and grazing—to afford greater protection to peri-urban communities in fire-prone regions. But how effective are these measures? Severe wildfires in southern Australia in 2009 presented a rare opportunity to address this question empirically. We predicted that modifying several fuels could theoretically reduce house loss by 76%–97%, which would translate to considerably fewer wildfire-related deaths. However, maximum levels of fuel reduction are unlikely to be feasible at every house for logistical and environmental reasons. Significant fuel variables in a logistic regression model we selected to predict house loss were (in order of decreasing effect): (1) the cover of trees and shrubs within 40 m of houses, (2) whether trees and shrubs within 40 m of houses was predominantly remnant or planted, (3) the upwind distance from houses to groups of trees or shrubs, (4) the upwind distance from houses to public forested land (irrespective of whether it was managed for nature conservation or logging), (5) the upwind distance from houses to prescribed burning within 5 years, and (6) the number of buildings or structures within 40 m of houses. All fuel treatments were more effective if undertaken closer to houses. For example, 15% fewer houses were destroyed if prescribed burning occurred at the observed minimum distance from houses (0.5 km) rather than the observed mean distance from houses (8.5 km). Our results imply that a shift in emphasis away from broad-scale fuel-reduction to intensive fuel treatments close to property will more effectively mitigate impacts from wildfires on peri-urban communities. PMID:22279530

  16. ELECTROFISHING DISTANCE NEEDED TO ESTIMATE FISH SPECIES RICHNESS IN RAFTABLE WESTERN USA RIVERS

    EPA Science Inventory

    A critical issue in river monitoring is the minimum amount of sampling distance required to adequately represent the fish assemblage of a reach. Determining adequate sampling distance is important because it affects estimates of fish assemblage integrity and diversity at local a...

  17. Truncation Depth Rule-of-Thumb for Convolutional Codes

    NASA Technical Reports Server (NTRS)

    Moision, Bruce

    2009-01-01

    In this innovation, it is shown that a commonly used rule of thumb (that the truncation depth of a convolutional code should be five times the memory length, m, of the code) is accurate only for rate 1/2 codes. In fact, the truncation depth should be 2.5 m/(1 - r), where r is the code rate. The accuracy of this new rule is demonstrated by tabulating the distance properties of a large set of known codes. This new rule was derived by bounding the losses due to truncation as a function of the code rate. With regard to particular codes, a good indicator of the required truncation depth is the path length at which all paths that diverge from a particular path have accumulated the minimum distance of the code. It is shown that the new rule of thumb provides an accurate prediction of this depth for codes of varying rates.

  18. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Dorum, O.H.; Hoover, A.; Jones, J.P.

    This paper addresses some issues in the development of sensor-based systems for mobile robot navigation which use range imaging sensors as the primary source for geometric information about the environment. In particular, we describe a model of scanning laser range cameras which takes into account the properties of the mechanical system responsible for image formation and a calibration procedure which yields improved accuracy over previous models. In addition, we describe an algorithm which takes the limitations of these sensors into account in path planning and path execution. In particular, range imaging sensors are characterized by a limited field of viewmore » and a standoff distance -- a minimum distance nearer than which surfaces cannot be sensed. These limitations can be addressed by enriching the concept of configuration space to include information about what can be sensed from a given configuration, and using this information to guide path planning and path following.« less

  19. Interactions in charged colloidal suspensions: A molecular dynamics simulation study

    NASA Astrophysics Data System (ADS)

    Padidela, Uday Kumar; Behera, Raghu Nath

    2017-07-01

    Colloidal suspensions are extensively used in everyday life and find several applications in the pharmaceutical, chemical, food industries, etc. We present the classical molecular dynamics simulation results of the structural and transport properties of charged colloidal suspensions as a function of its size, charge and concentration. The system is viewed as a two-component (colloids and counterions) primitive model consisting of spherical colloid particle (macroion) and the counterions (micro-particles), which are treated explicitly. The solvent is treated as dielectric continuum. A systematic trend in the radial distribution functions g(r), potential of mean force W(r), different thermodynamic properties and diffusion coefficients is obtained as a function of colloid charge, size and concentration. An attractive minimum in W(r) is obtained at short interparticle distance.

  20. Structure for identifying, locating and quantifying physical phenomena

    DOEpatents

    Richardson, John G.

    2006-10-24

    A method and system for detecting, locating and quantifying a physical phenomena such as strain or a deformation in a structure. A minimum resolvable distance along the structure is selected and a quantity of laterally adjacent conductors is determined. Each conductor includes a plurality of segments coupled in series which define the minimum resolvable distance along the structure. When a deformation occurs, changes in the defined energy transmission characteristics along each conductor are compared to determine which segment contains the deformation.

  1. Method and apparatus for identifying, locating and quantifying physical phenomena and structure including same

    DOEpatents

    Richardson, John G.

    2006-01-24

    A method and system for detecting, locating and quantifying a physical phenomena such as strain or a deformation in a structure. A minimum resolvable distance along the structure is selected and a quantity of laterally adjacent conductors is determined. Each conductor includes a plurality of segments coupled in series which define the minimum resolvable distance along the structure. When a deformation occurs, changes in the defined energy transmission characteristics along each conductor are compared to determine which segment contains the deformation.

  2. Value of epicardial potential maps in localizing pre-excitation sites for radiofrequency ablation. A simulation study

    NASA Astrophysics Data System (ADS)

    Hren, Rok

    1998-06-01

    Using computer simulations, we systematically investigated the limitations of an inverse solution that employs the potential distribution on the epicardial surface as an equivalent source model in localizing pre-excitation sites in Wolff-Parkinson-White syndrome. A model of the human ventricular myocardium that features an anatomically accurate geometry, an intramural rotating anisotropy and a computational implementation of the excitation process based on electrotonic interactions among cells, was used to simulate body surface potential maps (BSPMs) for 35 pre-excitation sites positioned along the atrioventricular ring. Two individualized torso models were used to account for variations in torso boundaries. Epicardial potential maps (EPMs) were computed using the L-curve inverse solution. The measure for accuracy of the localization was the distance between a position of the minimum in the inverse EPMs and the actual site of pre-excitation in the ventricular model. When the volume conductor properties and lead positions of the torso were precisely known and the measurement noise was added to the simulated BSPMs, the minimum in the inverse EPMs was at 12 ms after the onset on average within cm of the pre-excitation site. When the standard torso model was used to localize the sites of onset of the pre-excitation sequence initiated in individualized male and female torso models, the mean distance between the minimum and the pre-excitation site was cm for the male torso and cm for the female torso. The findings of our study indicate that a location of the minimum in EPMs computed using the inverse solution can offer non-invasive means for pre-interventional planning of the ablative treatment.

  3. Minimum triplet covers of binary phylogenetic X-trees.

    PubMed

    Huber, K T; Moulton, V; Steel, M

    2017-12-01

    Trees with labelled leaves and with all other vertices of degree three play an important role in systematic biology and other areas of classification. A classical combinatorial result ensures that such trees can be uniquely reconstructed from the distances between the leaves (when the edges are given any strictly positive lengths). Moreover, a linear number of these pairwise distance values suffices to determine both the tree and its edge lengths. A natural set of pairs of leaves is provided by any 'triplet cover' of the tree (based on the fact that each non-leaf vertex is the median vertex of three leaves). In this paper we describe a number of new results concerning triplet covers of minimum size. In particular, we characterize such covers in terms of an associated graph being a 2-tree. Also, we show that minimum triplet covers are 'shellable' and thereby provide a set of pairs for which the inter-leaf distance values will uniquely determine the underlying tree and its associated branch lengths.

  4. 24 CFR 200.925a - Multifamily and care-type minimum property standards.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

  5. 24 CFR 200.925a - Multifamily and care-type minimum property standards.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

  6. 24 CFR 200.925a - Multifamily and care-type minimum property standards.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

  7. 24 CFR 200.925a - Multifamily and care-type minimum property standards.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

  8. Cyclists' perceptions of motorist harassment pre- to post-trial of the minimum passing distance road rule amendment in Queensland, Australia.

    PubMed

    Heesch, Kristiann C; Schramm, Amy; Debnath, Ashim Kumar; Haworth, Narelle

    2017-12-01

    Issues addressed Cyclists' perceptions of harassment from motorists discourages cycling. This study examined changes in cyclists' reporting of harassment pre- to post-introduction of the Queensland trial of the minimum passing distance road rule amendment (MPD-RRA). Methods Cross-sectional online surveys of cyclists in Queensland, Australia were conducted in 2009 (pre-trial; n=1758) and 2015 (post-trial commencement; n=1997). Cyclists were asked about their experiences of harassment from motorists while cycling. Logistic regression modelling was used to examine differences in the reporting of harassment between these time periods, after adjustments for demographic characteristics and cycling behaviour. Results At both time periods, the most reported types of harassment were deliberately driving too close (causing fear or anxiety), shouting abuse and making obscene gestures or engaging in sexual harassment. The percentage of cyclists who reported tailgating by motorists increased between 2009 and 2015 (15.1% to 19.5%; P<0.001). The percentage of cyclists reporting other types of harassment did not change significantly. Conclusions Cyclists in Queensland continue to perceive harassment while cycling on the road. The amendment to the minimum passing distance rule in Queensland appears to be having a negative effect on one type of harassment but no significant effects on others. So what? Minimum passing distance rules may not be improving cyclists' perceptions of motorists' behaviours. Additional strategies are required to create a supportive environment for cycling.

  9. Benefits of Using Pairwise Trajectory Management in the Central East Pacific

    NASA Technical Reports Server (NTRS)

    Chartrand, Ryan; Ballard, Kathryn

    2016-01-01

    Pairwise Trajectory Management (PTM) is a concept that utilizes airborne and ground-based capabilities to enable airborne spacing operations in oceanic regions. The goal of PTM is to use enhanced surveillance, along with airborne tools, to manage the spacing between aircraft. Due to the enhanced airborne surveillance of Automatic Dependent Surveillance-Broadcast (ADS-B) information and reduced communication, the PTM minimum spacing distance will be less than distances currently required of an air traffic controller. Reduced minimum distance will increase the capacity of aircraft operations at a given altitude or volume of airspace, thereby increasing time on desired trajectory and overall flight efficiency. PTM is designed to allow a flight crew to resolve a specific traffic conflict (or conflicts), identified by the air traffic controller, while maintaining the flight crew's desired altitude. The air traffic controller issues a PTM clearance to a flight crew authorized to conduct PTM operations in order to resolve a conflict for the pair (or pairs) of aircraft (i.e., the PTM aircraft and a designated target aircraft). This clearance requires the flight crew of the PTM aircraft to use their ADS-B-enabled onboard equipment to manage their spacing relative to the designated target aircraft to ensure spacing distances that are no closer than the PTM minimum distance. When the air traffic controller determines that PTM is no longer required, the controller issues a clearance to cancel the PTM operation.

  10. Scale-dependent correlation of seabirds with schooling fish in a coastal ecosystem

    USGS Publications Warehouse

    Schneider, Davod C.; Piatt, John F.

    1986-01-01

    The distribution of piscivorous seabirds relative to schooling fish was investigated by repeated censusing of 2 intersecting transects in the Avalon Channel, which carries the Labrador Current southward along the east coast of Newfoundland. Murres (primarily common murres Uria aalge), Atlantic puffins Fratercula arctica, and schooling fish (primarily capelin Mallotus villosus) were highly aggregated at spatial scales ranging from 0.25 to 15 km. Patchiness of murres, puffins and schooling fish was scale-dependent, as indicated by significantly higher variance-to-mean ratios at large measurement distances than at the minimum distance, 0.25 km. Patch scale of puffins ranged from 2.5 to 15 km, of murres from 3 to 8.75 km, and of schooling fish from 1.25 to 15 km. Patch scale of birds and schooling fish was similar m 6 out of 9 comparisons. Correlation between seabirds and schooling birds was significant at the minimum measurement distance in 6 out of 12 comparisons. Correlation was scale-dependent, as indicated by significantly higher coefficients at large measurement distances than at the minimum distance. Tracking scale, as indicated by the maximum significant correlation between birds and schooling fish, ranged from 2 to 6 km. Our analysis showed that extended aggregations of seabirds are associated with extended aggregations of schooling fish and that correlation of these marine carnivores with their prey is scale-dependent.

  11. Solar system plasma turbulence and intermittency at the maximum and minimum of the solar cycle

    NASA Astrophysics Data System (ADS)

    Echim, Marius M.

    2015-04-01

    We report on the analysis of turbulence properties of the solar wind and the planetary magnetosheaths of Venus and Earth at solar maximum (2000-2001) and minimum (1997-1998, 2007-2008) as revealed by Ulysses, Cluster and Venus Express. We provide an overview of the spectral and scaling properties of turbulence during the targeted time periods. A selection of Ulysses data reveals the spectral properties of the "pure" slow and "pure" fast solar wind turbulence, out of the ecliptic, at radial distances ranging between 1.3 and 5.4 AU. Venus Express and Cluster data contribute to the description of the solar wind turbulence at 0.72 AU and respectively 1 AU. The spectral analysis of magnetosheath data from Venus Express and Cluster reveals the properties of turbulence to be compared to solar wind turbulence. The statistical properties of plasma and magnetic field fluctuations exhibit features linked with intermittency revealed as non-Gaussian Probability Distribution Functions (PDFs) and scale dependent kurtosis. PDFs are computed for the solar wind data from Ulysses, Venus Express and Cluster, and complement the analysis based on second order corrrelation function. The same strategy is applied to study the intermittency of the magnetosheath turbulence of Venus and the Earth. The results of our thorough survey of data bases are organized in catalogues available on line: PSD and PDFs results are stored in three solar wind data bases (one for the solar maximum, 1999-2001, two for the solar minimum, 1997-1998 and respectively, 2007-2008), and two planetary databases (one for the solar maximum, 2000-2001, that includes PSDs and PDFs obtained in the terrestrial magnetosheath, and one for the solar minimum, 2007-2008, that includes PSDs and PDFs obtained in the terrestrial and Venus magnetosheaths). As an example of higher order analysis resulting from these results we discuss the similarities and differences between fast and slow wind turbulence and intermittency. We also discuss how the exploitation of data bases produced by the FP7 project STORM contribute to developing a (virtual) laboratory for studying solar system plasma turbulence and intermittency. Research supported by the European FP7 Programme (grant agreement 313038/STORM), and a national grant CNCS -UEFISCDI, project number PN-II-ID-PCE-2012-4-0418.

  12. 27 CFR 555.220 - Table of separation distances of ammonium nitrate and blasting agents from explosives or blasting...

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... distances of ammonium nitrate and blasting agents from explosives or blasting agents. 555.220 Section 555... ammonium nitrate and blasting agents from explosives or blasting agents. Table: Department of Defense... Not over Minimum separation distance of acceptor from donor when barricaded (ft.) Ammonium nitrate...

  13. 27 CFR 555.220 - Table of separation distances of ammonium nitrate and blasting agents from explosives or blasting...

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... distances of ammonium nitrate and blasting agents from explosives or blasting agents. 555.220 Section 555... ammonium nitrate and blasting agents from explosives or blasting agents. Table: Department of Defense... Not over Minimum separation distance of acceptor from donor when barricaded (ft.) Ammonium nitrate...

  14. 27 CFR 555.220 - Table of separation distances of ammonium nitrate and blasting agents from explosives or blasting...

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... distances of ammonium nitrate and blasting agents from explosives or blasting agents. 555.220 Section 555... ammonium nitrate and blasting agents from explosives or blasting agents. Table: Department of Defense... Not over Minimum separation distance of acceptor from donor when barricaded (ft.) Ammonium nitrate...

  15. 27 CFR 555.220 - Table of separation distances of ammonium nitrate and blasting agents from explosives or blasting...

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... distances of ammonium nitrate and blasting agents from explosives or blasting agents. 555.220 Section 555... ammonium nitrate and blasting agents from explosives or blasting agents. Table: Department of Defense... Not over Minimum separation distance of acceptor from donor when barricaded (ft.) Ammonium nitrate...

  16. 27 CFR 555.220 - Table of separation distances of ammonium nitrate and blasting agents from explosives or blasting...

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... distances of ammonium nitrate and blasting agents from explosives or blasting agents. 555.220 Section 555... ammonium nitrate and blasting agents from explosives or blasting agents. Table: Department of Defense... Not over Minimum separation distance of acceptor from donor when barricaded (ft.) Ammonium nitrate...

  17. Effect of nanoholes on the plasmonic properties of star nanostructures

    NASA Astrophysics Data System (ADS)

    Zhu, Shaoli; Whittaker, Andrew K.; Blakey, Idriss

    2011-12-01

    The transmission and localized electric field distribution of nanostructures are the most important parameters in the plasmonic field for nano-optics and nanobiosensors. In this paper, we propose a novel nanostructure which may be used for nanobiosensor applications. The effect of nanoholes on the plasmonic properties of star nanostructure was studied via numerical simulation, using the finite-difference time-domain (FDTD) method. In the model, the material type and size of the nanostructures was fixed, but the distance between the monotor and the surface of the nanoholes was varied. For example, nanoholes were located in the center of the nanostructures. The simulation method was as follows. Initially, the wavelength of incident light was varied from 400 to 1200 nm and the transmission spectrum and the electric field distribution were simulated. Then at the resonance wavelength (wavelength where the transmission spectrum has a minimum), the localized electric field distribution was calculated at different distances from the surface of the nanostructures. This study shows that the position of nanoholes has a significant effect on the transmission and localized electric field distribution of star nanostructures. The condition for achieving the maximum localized electric field distribution can be used in nano-optics and nanobiosensors in the future.

  18. 46 CFR 42.20-70 - Minimum bow height.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... Freeboards § 42.20-70 Minimum bow height. (a) The bow height defined as the vertical distance at the forward... 46 Shipping 2 2012-10-01 2012-10-01 false Minimum bow height. 42.20-70 Section 42.20-70 Shipping... less than 0.68. (b) Where the bow height required in paragraph (a) of this section is obtained by sheer...

  19. 46 CFR 42.20-70 - Minimum bow height.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... Freeboards § 42.20-70 Minimum bow height. (a) The bow height defined as the vertical distance at the forward... 46 Shipping 2 2011-10-01 2011-10-01 false Minimum bow height. 42.20-70 Section 42.20-70 Shipping... less than 0.68. (b) Where the bow height required in paragraph (a) of this section is obtained by sheer...

  20. 46 CFR 42.20-70 - Minimum bow height.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... Freeboards § 42.20-70 Minimum bow height. (a) The bow height defined as the vertical distance at the forward... 46 Shipping 2 2014-10-01 2014-10-01 false Minimum bow height. 42.20-70 Section 42.20-70 Shipping... less than 0.68. (b) Where the bow height required in paragraph (a) of this section is obtained by sheer...

  1. 46 CFR 42.20-70 - Minimum bow height.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... Freeboards § 42.20-70 Minimum bow height. (a) The bow height defined as the vertical distance at the forward... 46 Shipping 2 2013-10-01 2013-10-01 false Minimum bow height. 42.20-70 Section 42.20-70 Shipping... less than 0.68. (b) Where the bow height required in paragraph (a) of this section is obtained by sheer...

  2. 46 CFR 42.20-70 - Minimum bow height.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... Freeboards § 42.20-70 Minimum bow height. (a) The bow height defined as the vertical distance at the forward... 46 Shipping 2 2010-10-01 2010-10-01 false Minimum bow height. 42.20-70 Section 42.20-70 Shipping... less than 0.68. (b) Where the bow height required in paragraph (a) of this section is obtained by sheer...

  3. The Effects of Target and Missile Characteristics on Theoretical Minimum Miss Distance for a Beam-Rider Guidance System in the Presence of Noise

    NASA Technical Reports Server (NTRS)

    Stewart, Elwood C.; Druding, Frank; Nishiura, Togo

    1959-01-01

    A study has been made to determine the relative importance of those factors which place an inherent limitation on the minimum obtainable miss distance for a beam-rider navigation system operating in the presence of glint noise and target evasive maneuver. Target and missile motions are assumed to be coplanar. The factors considered are the missile natural frequencies and damping ratios, missile steady-state acceleration capabilities, target evasive maneuver characteristics, and angular scintillation noise characteristics.

  4. Minimum requirements for adequate nighttime conspicuity of highway signs

    DOT National Transportation Integrated Search

    1988-02-01

    A laboratory and field study were conducted to assess the minimum luminance levels of signs to ensure that they will be detected and identified at adequate distances under nighttime driving conditions. A total of 30 subjects participated in the field...

  5. The Universal Transverse Mercator (UTM) grid

    USGS Publications Warehouse

    ,

    1997-01-01

    The most convenient way to identify points on the curved surface of the Earth is with a system of reference lines called parallels of latitude and meridians of longitude. On some maps the meridians and parallels appear as straight lines. On most modern maps, however, the meridians and parallels may appear as curved lines. These differences are due to the mathematical treatment required to portray a curved surface on a flat surface so that important properties of the map (such as distance and areal accuracy) are shown with minimum distortion. The system used to portray a portion of the round Earth on a flat surface is called a map projection.

  6. The Universal Transverse Mercator (UTM) grid

    USGS Publications Warehouse

    ,

    1999-01-01

    The most convenient way to identify points on the curved surface of the Earth is with a system of reference lines called parallels of latitude and meridians of longitude. On some maps, the meridians and parallels appear as straight lines. On most modern maps, however, the meridians and parallels appear as curved lines. These differences sre due to the mathematical treatment required to portray a curved surface on a flat surface so that important properties of the map (such as distance and areal accuracy) are shown with minimum distortion. The system used to portray a portion of the round Earth on a flat surface is called a map projection.

  7. What determines the direction of minimum variance of the magnetic field fluctuations in the solar wind?

    NASA Technical Reports Server (NTRS)

    Grappin, R.; Velli, M.

    1995-01-01

    The solar wind is not an isotropic medium; two symmetry axis are provided, first the radial direction (because the mean wind is radial) and second the spiral direction of the mean magnetic field, which depends on heliocentric distance. Observations show very different anisotropy directions, depending on the frequency waveband; while the large-scale velocity fluctuations are essentially radial, the smaller scale magnetic field fluctuations are mostly perpendicular to the mean field direction, which is not the expected linear (WkB) result. We attempt to explain how these properties are related, with the help of numerical simulations.

  8. Conformations and properties of O-Alkyl- S-(2- N, N-dialkylamino)-ethylmethylthiophosphonates

    NASA Astrophysics Data System (ADS)

    Strukov, O. G.; Kondrat'ev, V. B.; Vlasova, Z. V.; Petrunin, V. A.

    2017-01-01

    Conformers of the biologically active compounds CH3P(O)(OR)(SCH2CH2NR 2 ' ), where ( I) R = i-C4H9, R' = C2H5 and ( II) R = C2H5, R' = i-C3H7, are calculated within the AM1 level of theory. The elongated and twisted forms with maximum and minimum distances between a nitrogen atom and those of a phosphorus tetrahedron, respectively, and bearing a syn and anti oriented alkoxy group relative to a phosphoryl oxygen, are studied. It is found that the differences between the energy, electronic, and geometric parameters of these forms are apparent in differences between their properties, e.g., the ability to participate in complexation and protonation, reactions that to some extent simulate the interaction between a substance and a biological object.

  9. Progressive addition lenses--measurements and ratings.

    PubMed

    Sheedy, Jim; Hardy, Raymond F; Hayes, John R

    2006-01-01

    This study is a followup to a previous study in which the optics of several progressive addition lens (PALs) designs were measured and analyzed. The objective was to provide information about various PAL designs to enable eye care practitioners to select designs based on the particular viewing requirements of the patient. The optical properties of 12 lenses of the same power for each of 23 different PAL designs were measured with a Rotlex Class Plus lens analyzer. Lenses were ordered through optical laboratories and specified to be plano with a +2.00 diopters add. Measurements were normalized to plano at the manufacturer-assigned location for the distance power to eliminate laboratory tolerance errors. The magnitude of unwanted astigmatism and the widths and areas of the distance, intermediate, and near viewing zones were calculated from the measured data according to the same criteria used in a previous study. The optical characteristics of the different PAL designs were significantly different from one another. The differences were significant in terms of the sizes and widths of the viewing zones, the amount of unwanted astigmatism, and the minimum fitting height. Ratings of the distance, intermediate, and near viewing areas were calculated for each PAL design based on the widths and sizes of those zones. Ratings for unwanted astigmatism and recommended minimum fitting heights were also determined. Ratings based on combinations of viewing zone ratings are also reported. The ratings are intended to be used to select a PAL design that matches the particular visual needs of the patient and to evaluate the success and performance of currently worn PALs. Reasoning and task analyses suggest that these differences can be used to select a PAL design to meet the individual visual needs of the patient; clinical trials studies are required to test this hypothesis.

  10. Minimum variance geographic sampling

    NASA Technical Reports Server (NTRS)

    Terrell, G. R. (Principal Investigator)

    1980-01-01

    Resource inventories require samples with geographical scatter, sometimes not as widely spaced as would be hoped. A simple model of correlation over distances is used to create a minimum variance unbiased estimate population means. The fitting procedure is illustrated from data used to estimate Missouri corn acreage.

  11. 7 CFR 1703.133 - Maximum and minimum amounts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Maximum and minimum amounts. 1703.133 Section 1703.133 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Combination Loan and Grant...

  12. 7 CFR 1703.133 - Maximum and minimum amounts.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 11 2011-01-01 2011-01-01 false Maximum and minimum amounts. 1703.133 Section 1703.133 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Combination Loan and Grant...

  13. 7 CFR 1703.133 - Maximum and minimum amounts.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 11 2013-01-01 2013-01-01 false Maximum and minimum amounts. 1703.133 Section 1703.133 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Combination Loan and Grant...

  14. 7 CFR 1703.133 - Maximum and minimum amounts.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 11 2012-01-01 2012-01-01 false Maximum and minimum amounts. 1703.133 Section 1703.133 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Combination Loan and Grant...

  15. 7 CFR 1703.133 - Maximum and minimum amounts.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 11 2014-01-01 2014-01-01 false Maximum and minimum amounts. 1703.133 Section 1703.133 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Combination Loan and Grant...

  16. Geographical diffusion of prazosin across Veterans Health Administration: Examination of regional variation in daily dosing and quality indicators among veterans with posttraumatic stress disorder.

    PubMed

    Abrams, Thad E; Lund, Brian C; Alexander, Bruce; Bernardy, Nancy C; Friedman, Matthew J

    2015-01-01

    Posttraumatic stress disorder (PTSD) is a high-priority treatment area for the Veterans Health Administration (VHA), and dissemination patterns of innovative, efficacious therapies can inform areas for potential improvement of diffusion efforts and quality prescribing. In this study, we replicated a prior examination of the period prevalence of prazosin use as a function of distance from Puget Sound, Washington, where prazosin was first tested as an effective treatment for PTSD and where prazosin use was previously shown to be much greater than in other parts of the United States. We tested the following three hypotheses related to prazosin geographic diffusion: (1) a positive geographical correlation exists between the distance from Puget Sound and the proportion of users treated according to a guideline recommended minimum therapeutic target dose (>/=6 mg/d), (2) an inverse geographic correlation exists between prazosin and benzodiazepine use, and (3) no geographical correlation exists between prazosin use and serotonin reuptake inhibitor/serotonin norepinephrine reuptake inhibitor (SSRI/SNRI) use. Among a national sample of veterans with PTSD, overall prazosin utilization increased from 5.5 to 14.8% from 2006 to 2012. During this time period, rates at the Puget Sound VHA location declined from 34.4 to 29.9%, whereas utilization rates at locations a minimum of 2,500 miles away increased from 3.0 to 12.8%. Rates of minimum target dosing fell from 42.6 to 34.6% at the Puget Sound location. In contrast, at distances of at least 2,500 miles from Puget Sound, minimum threshold dosing rates remained stable (range, 18.6 to 17.7%). No discernible association was demonstrated between SSRI/SNRI or benzodiazepine utilization and the geographic distance from Puget Sound. Minimal threshold dosing of prazosin correlated positively with increased diffusion of prazosin use, but there was still a distance diffusion gradient. Although prazosin adoption has improved, geographic differences persist in both prescribing rates and minimum target dosing. Importantly, these regional disparities appear to be limited to prazosin prescribing and are not meaningfully correlated with SSRI/SNRI and benzodiazepine use as indicators of PTSD prescribing quality.

  17. Chemistry of Aviation Fuels

    NASA Technical Reports Server (NTRS)

    Knepper, Bryan; Hwang, Soon Muk; DeWitt, Kenneth J.

    2004-01-01

    Minimum ignition energies of various methanol/air mixtures were measured in a temperature controlled constant volume combustion vessel using a spark ignition method with a spark gap distance of 2 mm. The minimum ignition energies decrease rapidly as the mixture composition (equivalence ratio, Phi) changes from lean to stoichiometric, reach a minimum value, and then increase rather slowly with Phi. The minimum of the minimum ignition energy (MIE) and the corresponding mixture composition were determined to be 0.137 mJ and Phi = 1.16, a slightly rich mixture. The variation of minimum ignition energy with respect to the mixture composition is explained in terms of changes in reaction chemistry.

  18. Rail vs truck transport of biomass.

    PubMed

    Mahmudi, Hamed; Flynn, Peter C

    2006-01-01

    This study analyzes the economics of transshipping biomass from truck to train in a North American setting. Transshipment will only be economic when the cost per unit distance of a second transportation mode is less than the original mode. There is an optimum number of transshipment terminals which is related to biomass yield. Transshipment incurs incremental fixed costs, and hence there is a minimum shipping distance for rail transport above which lower costs/km offset the incremental fixed costs. For transport by dedicated unit train with an optimum number of terminals, the minimum economic rail shipping distance for straw is 170 km, and for boreal forest harvest residue wood chips is 145 km. The minimum economic shipping distance for straw exceeds the biomass draw distance for economically sized centrally located power plants, and hence the prospects for rail transport are limited to cases in which traffic congestion from truck transport would otherwise preclude project development. Ideally, wood chip transport costs would be lowered by rail transshipment for an economically sized centrally located power plant, but in a specific case in Alberta, Canada, the layout of existing rail lines precludes a centrally located plant supplied by rail, whereas a more versatile road system enables it by truck. Hence for wood chips as well as straw the economic incentive for rail transport to centrally located processing plants is limited. Rail transshipment may still be preferred in cases in which road congestion precludes truck delivery, for example as result of community objections.

  19. Solar wind velocity and temperature in the outer heliosphere

    NASA Technical Reports Server (NTRS)

    Gazis, P. R.; Barnes, A.; Mihalov, J. D.; Lazarus, A. J.

    1994-01-01

    At the end of 1992, the Pioneer 10, Pioneer 11, and Voyager 2 spacecraft were at heliocentric distances of 56.0, 37.3, and 39.0 AU and heliographic latitudes of 3.3 deg N, 17.4 deg N, and 8.6 deg S, respectively. Pioneer 11 and Voyager 2 are at similar celestial longitudes, while Pioneer 10 is on the opposite side of the Sun. All three spacecraft have working plasma analyzers, so intercomparison of data from these spacecraft provides important information about the global character of the solar wind in the outer heliosphere. The averaged solar wind speed continued to exhibit its well-known variation with solar cycle: Even at heliocentric distances greater than 50 AU, the average speed is highest during the declining phase of the solar cycle and lowest near solar minimum. There was a strong latitudinal gradient in solar wind speed between 3 deg and 17 deg N during the last solar minimum, but this gradient has since disappeared. The solar wind temperature declined with increasing heliocentric distance out to a heliocentric distance of at least 20 AU; this decline appeared to continue at larger heliocentric distances, but temperatures in the outer heliosphere were suprisingly high. While Pioneer 10 and Voyager 2 observed comparable solar wind temperatures, the temperature at Pioneer 11 was significantly higher, which suggests the existence of a large-scale variation of temperature with heliographic longitude. There was also some suggestion that solar wind temperatures were higher near solar minimum.

  20. Survey of the spectral properties of turbulence in the solar wind, the magnetospheres of Venus and Earth, at solar minimum and maximum

    NASA Astrophysics Data System (ADS)

    Echim, Marius M.

    2014-05-01

    In the framework of the European FP7 project STORM ("Solar system plasma Turbulence: Observations, inteRmittency and Multifractals") we analyze the properties of turbulence in various regions of the solar system, for the minimum and respectively maximum of the solar activity. The main scientific objective of STORM is to advance the understanding of the turbulent energy transfer, intermittency and multifractals in space plasmas. Specific analysis methods are applied on magnetic field and plasma data provided by Ulysses, Venus Express and Cluster, as well as other solar system missions (e.g. Giotto, Cassini). In this paper we provide an overview of the spectral properties of turbulence derived from Power Spectral Densities (PSD) computed in the solar wind (from Ulysses, Cluster, Venus Express) and at the interface of planetary magnetospheres with the solar wind (from Venus Express, Cluster). Ulysses provides data in the solar wind between 1992 and 2008, out of the ecliptic, at radial distances ranging between 1.3 and 5.4 AU. We selected only those Ulysses data that satisfy a consolidated set of selection criteria able to identify "pure" fast and slow wind. We analyzed Venus Express data close to the orbital apogee, in the solar wind, at 0.72 AU, and in the Venus magnetosheath. We investigated Cluster data in the solar wind (for time intervals not affected by planetary ions effects), the magnetosheath and few crossings of other key magnetospheric regions (cusp, plasma sheet). We organize our PSD results in three solar wind data bases (one for the solar maximum, 1999-2001, two for the solar minimum, 1997-1998 and respectively, 2007-2008), and two planetary databases (one for the solar maximum, 2000-2001, that includes PSD obtained in the terrestrial magnetosphere, and one for the solar minimum, 2007-2008, that includes PSD obtained in the terrestrial and Venus magnetospheres and magnetosheaths). In addition to investigating the properties of turbulence for the minimum and maximum of the solar cycle we also analyze the spectral similarities and differences between fast and slow wind turbulence. We emphasize the importance of our data survey and analysis in the context of understanding the solar wind turbulence, the exploitation of data bases and as a first step towards developing a (virtual) laboratory for studying solar system plasma turbulence. Research supported by the European Community's Seventh Framework Programme (FP7/2007-2013) under grant agreement no 313038/STORM, and a grant of the Romanian Ministry of National Education, CNCS - UEFISCDI, project number PN-II-ID-PCE-2012-4-0418.

  1. 33 CFR 67.05-20 - Minimum lighting requirements.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...

  2. 33 CFR 67.05-20 - Minimum lighting requirements.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...

  3. 33 CFR 67.05-20 - Minimum lighting requirements.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...

  4. 33 CFR 67.05-20 - Minimum lighting requirements.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...

  5. 33 CFR 67.05-20 - Minimum lighting requirements.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...

  6. 7 CFR 1703.143 - Maximum and minimum amounts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Maximum and minimum amounts. 1703.143 Section 1703.143 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Loan Program § 1703.143...

  7. 7 CFR 1703.143 - Maximum and minimum amounts.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 11 2012-01-01 2012-01-01 false Maximum and minimum amounts. 1703.143 Section 1703.143 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Loan Program § 1703.143...

  8. 7 CFR 1703.143 - Maximum and minimum amounts.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 11 2013-01-01 2013-01-01 false Maximum and minimum amounts. 1703.143 Section 1703.143 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Loan Program § 1703.143...

  9. 7 CFR 1703.143 - Maximum and minimum amounts.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 11 2014-01-01 2014-01-01 false Maximum and minimum amounts. 1703.143 Section 1703.143 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Loan Program § 1703.143...

  10. 7 CFR 1703.143 - Maximum and minimum amounts.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 11 2011-01-01 2011-01-01 false Maximum and minimum amounts. 1703.143 Section 1703.143 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Loan Program § 1703.143...

  11. 40 CFR 257.25 - Assessment monitoring program.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ...) Minimum distance between upgradient edge of the unit and downgradient monitoring well screen (minimum... that is likely to be without appreciable risk of deleterious effects during a lifetime. For purposes of this subpart, systemic toxicants include toxic chemicals that cause effects other than cancer or...

  12. 40 CFR 257.25 - Assessment monitoring program.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ...) Minimum distance between upgradient edge of the unit and downgradient monitoring well screen (minimum... that is likely to be without appreciable risk of deleterious effects during a lifetime. For purposes of this subpart, systemic toxicants include toxic chemicals that cause effects other than cancer or...

  13. 40 CFR 257.25 - Assessment monitoring program.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ...) Minimum distance between upgradient edge of the unit and downgradient monitoring well screen (minimum... that is likely to be without appreciable risk of deleterious effects during a lifetime. For purposes of this subpart, systemic toxicants include toxic chemicals that cause effects other than cancer or...

  14. Analysis of Radiation Impact on White Mice through Radiation Dose Mapping in Medical Physics Laboratory

    NASA Astrophysics Data System (ADS)

    Sutikno, Madnasri; Susilo; Arya Wijayanti, Riza

    2016-08-01

    A study about X-ray radiation impact on the white mice through radiation dose mapping in Medical Physic Laboratory is already done. The purpose of this research is to determine the minimum distance of radiologist to X-ray instrument through treatment on the white mice. The radiation exposure doses are measured on the some points in the distance from radiation source between 30 cm up to 80 with interval of 30 cm. The impact of radiation exposure on the white mice and the effects of radiation measurement in different directions are investigated. It is founded that minimum distance of radiation worker to radiation source is 180 cm and X-ray has decreased leukocyte number and haemoglobin and has increased thrombocyte number in the blood of white mice.

  15. Estimates of the absolute error and a scheme for an approximate solution to scheduling problems

    NASA Astrophysics Data System (ADS)

    Lazarev, A. A.

    2009-02-01

    An approach is proposed for estimating absolute errors and finding approximate solutions to classical NP-hard scheduling problems of minimizing the maximum lateness for one or many machines and makespan is minimized. The concept of a metric (distance) between instances of the problem is introduced. The idea behind the approach is, given the problem instance, to construct another instance for which an optimal or approximate solution can be found at the minimum distance from the initial instance in the metric introduced. Instead of solving the original problem (instance), a set of approximating polynomially/pseudopolynomially solvable problems (instances) are considered, an instance at the minimum distance from the given one is chosen, and the resulting schedule is then applied to the original instance.

  16. Study of Noise-Certification Standards for Aircraft Engines. Volume 2. Procedures for Measuring Far Field Sound Pressure Levels around an Outdoor Jet-Engine Test Stand.

    DTIC Science & Technology

    1983-06-01

    60 References ........................................................... 79 AccesSqlon For NTIS rFA&I r"!’ TAU U: .,P Dist r A. -. S iv...separate exhaust nozzles for discharge of fan and turbine exhaust flows (e.g., JT15D, TFE731 , ALF-502, CF34, JT3D, CFM56, RB.211, CF6, JT9D, and PW2037...minimum radial distance from the effective source of sound at 40 Hz should then be approxi- mately 69 m. At 60 Hz, the minimum radial distance should be

  17. Applying six classifiers to airborne hyperspectral imagery for detecting giant reed

    USDA-ARS?s Scientific Manuscript database

    This study evaluated and compared six different image classifiers, including minimum distance (MD), Mahalanobis distance (MAHD), maximum likelihood (ML), spectral angle mapper (SAM), mixture tuned matched filtering (MTMF) and support vector machine (SVM), for detecting and mapping giant reed (Arundo...

  18. 7 CFR 1703.124 - Maximum and minimum grant amounts.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Maximum and minimum grant amounts. 1703.124 Section 1703.124 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Grant Program § 1703.124...

  19. 7 CFR 1703.124 - Maximum and minimum grant amounts.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... 7 Agriculture 11 2013-01-01 2013-01-01 false Maximum and minimum grant amounts. 1703.124 Section 1703.124 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Grant Program § 1703.124...

  20. 7 CFR 1703.124 - Maximum and minimum grant amounts.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... 7 Agriculture 11 2012-01-01 2012-01-01 false Maximum and minimum grant amounts. 1703.124 Section 1703.124 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Grant Program § 1703.124...

  1. 7 CFR 1703.124 - Maximum and minimum grant amounts.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... 7 Agriculture 11 2011-01-01 2011-01-01 false Maximum and minimum grant amounts. 1703.124 Section 1703.124 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Grant Program § 1703.124...

  2. 7 CFR 1703.124 - Maximum and minimum grant amounts.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... 7 Agriculture 11 2014-01-01 2014-01-01 false Maximum and minimum grant amounts. 1703.124 Section 1703.124 Agriculture Regulations of the Department of Agriculture (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL DEVELOPMENT Distance Learning and Telemedicine Grant Program § 1703.124...

  3. Nonlinear dimension reduction and clustering by Minimum Curvilinearity unfold neuropathic pain and tissue embryological classes.

    PubMed

    Cannistraci, Carlo Vittorio; Ravasi, Timothy; Montevecchi, Franco Maria; Ideker, Trey; Alessio, Massimo

    2010-09-15

    Nonlinear small datasets, which are characterized by low numbers of samples and very high numbers of measures, occur frequently in computational biology, and pose problems in their investigation. Unsupervised hybrid-two-phase (H2P) procedures-specifically dimension reduction (DR), coupled with clustering-provide valuable assistance, not only for unsupervised data classification, but also for visualization of the patterns hidden in high-dimensional feature space. 'Minimum Curvilinearity' (MC) is a principle that-for small datasets-suggests the approximation of curvilinear sample distances in the feature space by pair-wise distances over their minimum spanning tree (MST), and thus avoids the introduction of any tuning parameter. MC is used to design two novel forms of nonlinear machine learning (NML): Minimum Curvilinear embedding (MCE) for DR, and Minimum Curvilinear affinity propagation (MCAP) for clustering. Compared with several other unsupervised and supervised algorithms, MCE and MCAP, whether individually or combined in H2P, overcome the limits of classical approaches. High performance was attained in the visualization and classification of: (i) pain patients (proteomic measurements) in peripheral neuropathy; (ii) human organ tissues (genomic transcription factor measurements) on the basis of their embryological origin. MC provides a valuable framework to estimate nonlinear distances in small datasets. Its extension to large datasets is prefigured for novel NMLs. Classification of neuropathic pain by proteomic profiles offers new insights for future molecular and systems biology characterization of pain. Improvements in tissue embryological classification refine results obtained in an earlier study, and suggest a possible reinterpretation of skin attribution as mesodermal. https://sites.google.com/site/carlovittoriocannistraci/home.

  4. Interplay between strong correlation and adsorption distances: Co on Cu(001)

    NASA Astrophysics Data System (ADS)

    Bahlke, Marc Philipp; Karolak, Michael; Herrmann, Carmen

    2018-01-01

    Adsorbed transition metal atoms can have partially filled d or f shells due to strong on-site Coulomb interaction. Capturing all effects originating from electron correlation in such strongly correlated systems is a challenge for electronic structure methods. It requires a sufficiently accurate description of the atomistic structure (in particular bond distances and angles), which is usually obtained from first-principles Kohn-Sham density functional theory (DFT), which due to the approximate nature of the exchange-correlation functional may provide an unreliable description of strongly correlated systems. To elucidate the consequences of this popular procedure, we apply a combination of DFT with the Anderson impurity model (AIM), as well as DFT + U for a calculation of the potential energy surface along the Co/Cu(001) adsorption coordinate, and compare the results with those obtained from DFT. The adsorption minimum is shifted towards larger distances by applying DFT+AIM, or the much cheaper DFT +U method, compared to the corresponding spin-polarized DFT results, by a magnitude comparable to variations between different approximate exchange-correlation functionals (0.08 to 0.12 Å). This shift originates from an increasing correlation energy at larger adsorption distances, which can be traced back to the Co 3 dx y and 3 dz2 orbitals being more correlated as the adsorption distance is increased. We can show that such considerations are important, as they may strongly affect electronic properties such as the Kondo temperature.

  5. Cognitive Load Theory and the Use of Worked Examples as an Instructional Strategy in Physics for Distance Learners: A Preliminary Study

    ERIC Educational Resources Information Center

    Saw, Kim Guan

    2017-01-01

    This article revisits the cognitive load theory to explore the use of worked examples to teach a selected topic in a higher level undergraduate physics course for distance learners at the School of Distance Education, Universiti Sains Malaysia. With a break of several years from receiving formal education and having only minimum science…

  6. Measuring the misfit between seismograms using an optimal transport distance: application to full waveform inversion

    NASA Astrophysics Data System (ADS)

    Métivier, L.; Brossier, R.; Mérigot, Q.; Oudet, E.; Virieux, J.

    2016-04-01

    Full waveform inversion using the conventional L2 distance to measure the misfit between seismograms is known to suffer from cycle skipping. An alternative strategy is proposed in this study, based on a measure of the misfit computed with an optimal transport distance. This measure allows to account for the lateral coherency of events within the seismograms, instead of considering each seismic trace independently, as is done generally in full waveform inversion. The computation of this optimal transport distance relies on a particular mathematical formulation allowing for the non-conservation of the total energy between seismograms. The numerical solution of the optimal transport problem is performed using proximal splitting techniques. Three synthetic case studies are investigated using this strategy: the Marmousi 2 model, the BP 2004 salt model, and the Chevron 2014 benchmark data. The results emphasize interesting properties of the optimal transport distance. The associated misfit function is less prone to cycle skipping. A workflow is designed to reconstruct accurately the salt structures in the BP 2004 model, starting from an initial model containing no information about these structures. A high-resolution P-wave velocity estimation is built from the Chevron 2014 benchmark data, following a frequency continuation strategy. This estimation explains accurately the data. Using the same workflow, full waveform inversion based on the L2 distance converges towards a local minimum. These results yield encouraging perspectives regarding the use of the optimal transport distance for full waveform inversion: the sensitivity to the accuracy of the initial model is reduced, the reconstruction of complex salt structure is made possible, the method is robust to noise, and the interpretation of seismic data dominated by reflections is enhanced.

  7. Shock-wave propagation and cavitation bubble oscillation by Nd:YAG laser ablation of a metal in water.

    PubMed

    Chen, Xiao; Xu, Rong-Qing; Chen, Jian-Ping; Shen, Zhong-Hua; Jian, Lu; Ni, Xiao-Wu

    2004-06-01

    A highly sensitive fiber-optic sensor based on optical beam deflection is applied for investigating the propagation of a laser-induced plasma shock wave, the oscillation of a cavitation bubble diameter, and the development of a bubble-collapse-induced shock wave when a Nd:YAG laser pulse is focused upon an aluminum surface in water. By the sequence of experimental waveforms detected at different distances, the attenuation properties of the plasma shock wave and of the bubble-collapse-induced shock wave are obtained. Besides, based on characteristic signals, both the maximum and the minimum bubble radii at each oscillation cycle are determined, as are the corresponding oscillating periods.

  8. Wave-optics description of self-healing mechanism in Bessel beams.

    PubMed

    Aiello, Andrea; Agarwal, Girish S

    2014-12-15

    Bessel beams' great importance in optics lies in that these propagate without spreading and can reconstruct themselves behind an obstruction placed across their path. However, a rigorous wave-optics explanation of the latter property is missing. In this work, we study the reconstruction mechanism by means of a wave-optics description. We obtain expressions for the minimum distance beyond the obstruction at which the beam reconstructs itself, which are in close agreement with the traditional one determined from geometrical optics. Our results show that the physics underlying the self-healing mechanism can be entirely explained in terms of the propagation of plane waves with radial wave vectors lying on a ring.

  9. 75 FR 68814 - Notice of Submission of Proposed Information Collection to OMB Minimum Property Standards for...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-09

    ... Proposed Information Collection to OMB Minimum Property Standards for Multifamily and Care-Type Occupancy... Lists the Following Information Title of Proposal: Minimum Property Standards for Multifamily and Care-Type Occupancy Housing. OMB Approval Number: 2502-0321. Form Numbers: None. Description of the Need for...

  10. Traveling salesman problems with PageRank Distance on complex networks reveal community structure

    NASA Astrophysics Data System (ADS)

    Jiang, Zhongzhou; Liu, Jing; Wang, Shuai

    2016-12-01

    In this paper, we propose a new algorithm for community detection problems (CDPs) based on traveling salesman problems (TSPs), labeled as TSP-CDA. Since TSPs need to find a tour with minimum cost, cities close to each other are usually clustered in the tour. This inspired us to model CDPs as TSPs by taking each vertex as a city. Then, in the final tour, the vertices in the same community tend to cluster together, and the community structure can be obtained by cutting the tour into a couple of paths. There are two challenges. The first is to define a suitable distance between each pair of vertices which can reflect the probability that they belong to the same community. The second is to design a suitable strategy to cut the final tour into paths which can form communities. In TSP-CDA, we deal with these two challenges by defining a PageRank Distance and an automatic threshold-based cutting strategy. The PageRank Distance is designed with the intrinsic properties of CDPs in mind, and can be calculated efficiently. In the experiments, benchmark networks with 1000-10,000 nodes and varying structures are used to test the performance of TSP-CDA. A comparison is also made between TSP-CDA and two well-established community detection algorithms. The results show that TSP-CDA can find accurate community structure efficiently and outperforms the two existing algorithms.

  11. 41 CFR 50-202.2 - Minimum wage in all industries.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 41 Public Contracts and Property Management 1 2011-07-01 2009-07-01 true Minimum wage in all industries. 50-202.2 Section 50-202.2 Public Contracts and Property Management Other Provisions Relating to... Industries § 50-202.2 Minimum wage in all industries. In all industries, the minimum wage applicable to...

  12. 41 CFR 50-202.2 - Minimum wage in all industries.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 41 Public Contracts and Property Management 1 2013-07-01 2013-07-01 false Minimum wage in all industries. 50-202.2 Section 50-202.2 Public Contracts and Property Management Other Provisions Relating to... Industries § 50-202.2 Minimum wage in all industries. In all industries, the minimum wage applicable to...

  13. 41 CFR 50-202.2 - Minimum wage in all industries.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 41 Public Contracts and Property Management 1 2014-07-01 2014-07-01 false Minimum wage in all industries. 50-202.2 Section 50-202.2 Public Contracts and Property Management Other Provisions Relating to... Industries § 50-202.2 Minimum wage in all industries. In all industries, the minimum wage applicable to...

  14. 41 CFR 50-202.2 - Minimum wage in all industries.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 41 Public Contracts and Property Management 1 2012-07-01 2009-07-01 true Minimum wage in all industries. 50-202.2 Section 50-202.2 Public Contracts and Property Management Other Provisions Relating to... Industries § 50-202.2 Minimum wage in all industries. In all industries, the minimum wage applicable to...

  15. Non-Intrusive Impedance-Based Cable Tester

    NASA Technical Reports Server (NTRS)

    Medelius, Pedro J. (Inventor); Simpson, Howard J. (Inventor)

    1999-01-01

    A non-intrusive electrical cable tester determines the nature and location of a discontinuity in a cable through application of an oscillating signal to one end of the cable. The frequency of the oscillating signal is varied in increments until a minimum, close to zero voltage is measured at a signal injection point which is indicative of a minimum impedance at that point. The frequency of the test signal at which the minimum impedance occurs is then employed to determine the distance to the discontinuity by employing a formula which relates this distance to the signal frequency and the velocity factor of the cable. A numerically controlled oscillator is provided to generate the oscillating signal, and a microcontroller automatically controls operation of the cable tester to make the desired measurements and display the results. The device is contained in a portable housing which may be hand held to facilitate convenient use of the device in difficult to access locations.

  16. Short Distance Standoff Raman Detection of Extra Virgin Olive Oil Adulterated with Canola and Grapeseed Oils.

    PubMed

    Farley, Carlton; Kassu, Aschalew; Bose, Nayana; Jackson-Davis, Armitra; Boateng, Judith; Ruffin, Paul; Sharma, Anup

    2017-06-01

    A short distance standoff Raman technique is demonstrated for detecting economically motivated adulteration (EMA) in extra virgin olive oil (EVOO). Using a portable Raman spectrometer operating with a 785 nm laser and a 2-in. refracting telescope, adulteration of olive oil with grapeseed oil and canola oil is detected between 1% and 100% at a minimum concentration of 2.5% from a distance of 15 cm and at a minimum concentration of 5% from a distance of 1 m. The technique involves correlating the intensity ratios of prominent Raman bands of edible oils at 1254, 1657, and 1441 cm -1 to the degree of adulteration. As a novel variation in the data analysis technique, integrated intensities over a spectral range of 100 cm -1 around the Raman line were used, making it possible to increase the sensitivity of the technique. The technique is demonstrated by detecting adulteration of EVOO with grapeseed and canola oils at 0-100%. Due to the potential of this technique for making measurements from a convenient distance, the short distance standoff Raman technique has the promise to be used for routine applications in food industry such as identifying food items and monitoring EMA at various checkpoints in the food supply chain and storage facilities.

  17. 47 CFR 73.610 - Minimum distance separations between stations.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... they fail to comply with the requirements specified in paragraphs (b), (c) and (d) of this section... separation. (c) Minimum allotment and station adjacent channel separations applicable to all zones: (1... pairs of channels (see § 73.603(a)). (d) In addition to the requirements of paragraphs (a), (b) and (c...

  18. Quantitative estimation of landslide risk from rapid debris slides on natural slopes in the Nilgiri hills, India

    NASA Astrophysics Data System (ADS)

    Jaiswal, P.; van Westen, C. J.; Jetten, V.

    2011-06-01

    A quantitative procedure for estimating landslide risk to life and property is presented and applied in a mountainous area in the Nilgiri hills of southern India. Risk is estimated for elements at risk located in both initiation zones and run-out paths of potential landslides. Loss of life is expressed as individual risk and as societal risk using F-N curves, whereas the direct loss of properties is expressed in monetary terms. An inventory of 1084 landslides was prepared from historical records available for the period between 1987 and 2009. A substantially complete inventory was obtained for landslides on cut slopes (1042 landslides), while for natural slopes information on only 42 landslides was available. Most landslides were shallow translational debris slides and debris flowslides triggered by rainfall. On natural slopes most landslides occurred as first-time failures. For landslide hazard assessment the following information was derived: (1) landslides on natural slopes grouped into three landslide magnitude classes, based on landslide volumes, (2) the number of future landslides on natural slopes, obtained by establishing a relationship between the number of landslides on natural slopes and cut slopes for different return periods using a Gumbel distribution model, (3) landslide susceptible zones, obtained using a logistic regression model, and (4) distribution of landslides in the susceptible zones, obtained from the model fitting performance (success rate curve). The run-out distance of landslides was assessed empirically using landslide volumes, and the vulnerability of elements at risk was subjectively assessed based on limited historic incidents. Direct specific risk was estimated individually for tea/coffee and horticulture plantations, transport infrastructures, buildings, and people both in initiation and run-out areas. Risks were calculated by considering the minimum, average, and maximum landslide volumes in each magnitude class and the corresponding minimum, average, and maximum run-out distances and vulnerability values, thus obtaining a range of risk values per return period. The results indicate that the total annual minimum, average, and maximum losses are about US 44 000, US 136 000 and US 268 000, respectively. The maximum risk to population varies from 2.1 × 10-1 for one or more lives lost to 6.0 × 10-2 yr-1 for 100 or more lives lost. The obtained results will provide a basis for planning risk reduction strategies in the Nilgiri area.

  19. Advances in Distance-Based Hole Cuts on Overset Grids

    NASA Technical Reports Server (NTRS)

    Chan, William M.; Pandya, Shishir A.

    2015-01-01

    An automatic and efficient method to determine appropriate hole cuts based on distances to the wall and donor stencil maps for overset grids is presented. A new robust procedure is developed to create a closed surface triangulation representation of each geometric component for accurate determination of the minimum hole. Hole boundaries are then displaced away from the tight grid-spacing regions near solid walls to allow grid overlap to occur away from the walls where cell sizes from neighboring grids are more comparable. The placement of hole boundaries is efficiently determined using a mid-distance rule and Cartesian maps of potential valid donor stencils with minimal user input. Application of this procedure typically results in a spatially-variable offset of the hole boundaries from the minimum hole with only a small number of orphan points remaining. Test cases on complex configurations are presented to demonstrate the new scheme.

  20. Modeling the long-term evolution of space debris

    DOEpatents

    Nikolaev, Sergei; De Vries, Willem H.; Henderson, John R.; Horsley, Matthew A.; Jiang, Ming; Levatin, Joanne L.; Olivier, Scot S.; Pertica, Alexander J.; Phillion, Donald W.; Springer, Harry K.

    2017-03-07

    A space object modeling system that models the evolution of space debris is provided. The modeling system simulates interaction of space objects at simulation times throughout a simulation period. The modeling system includes a propagator that calculates the position of each object at each simulation time based on orbital parameters. The modeling system also includes a collision detector that, for each pair of objects at each simulation time, performs a collision analysis. When the distance between objects satisfies a conjunction criterion, the modeling system calculates a local minimum distance between the pair of objects based on a curve fitting to identify a time of closest approach at the simulation times and calculating the position of the objects at the identified time. When the local minimum distance satisfies a collision criterion, the modeling system models the debris created by the collision of the pair of objects.

  1. An effective visualization technique for depth perception in augmented reality-based surgical navigation.

    PubMed

    Choi, Hyunseok; Cho, Byunghyun; Masamune, Ken; Hashizume, Makoto; Hong, Jaesung

    2016-03-01

    Depth perception is a major issue in augmented reality (AR)-based surgical navigation. We propose an AR and virtual reality (VR) switchable visualization system with distance information, and evaluate its performance in a surgical navigation set-up. To improve depth perception, seamless switching from AR to VR was implemented. In addition, the minimum distance between the tip of the surgical tool and the nearest organ was provided in real time. To evaluate the proposed techniques, five physicians and 20 non-medical volunteers participated in experiments. Targeting error, time taken, and numbers of collisions were measured in simulation experiments. There was a statistically significant difference between a simple AR technique and the proposed technique. We confirmed that depth perception in AR could be improved by the proposed seamless switching between AR and VR, and providing an indication of the minimum distance also facilitated the surgical tasks. Copyright © 2015 John Wiley & Sons, Ltd.

  2. A network flow model for load balancing in circuit-switched multicomputers

    NASA Technical Reports Server (NTRS)

    Bokhari, Shahid H.

    1990-01-01

    In multicomputers that utilize circuit switching or wormhole routing, communication overhead depends largely on link contention - the variation due to distance between nodes is negligible. This has a major impact on the load balancing problem. In this case, there are some nodes with excess load (sources) and others with deficit load (sinks) and it is required to find a matching of sources to sinks that avoids contention. The problem is made complex by the hardwired routing on currently available machines: the user can control only which nodes communicate but not how the messages are routed. Network flow models of message flow in the mesh and the hypercube were developed to solve this problem. The crucial property of these models is the correspondence between minimum cost flows and correctly routed messages. To solve a given load balancing problem, a minimum cost flow algorithm is applied to the network. This permits one to determine efficiently a maximum contention free matching of sources to sinks which, in turn, tells one how much of the given imbalance can be eliminated without contention.

  3. Influence of the geomembrane on time-lapse ERT measurements for leachate injection monitoring.

    PubMed

    Audebert, M; Clément, R; Grossin-Debattista, J; Günther, T; Touze-Foltz, N; Moreau, S

    2014-04-01

    Leachate recirculation is a key process in the operation of municipal waste landfills as bioreactors. To quantify the water content and to evaluate the leachate injection system, in situ methods are required to obtain spatially distributed information, usually electrical resistivity tomography (ERT). However, this method can present false variations in the observations due to several parameters. This study investigates the impact of the geomembrane on ERT measurements. Indeed, the geomembrane tends to be ignored in the inversion process in most previously conducted studies. The presence of the geomembrane can change the boundary conditions of the inversion models, which have classically infinite boundary conditions. Using a numerical modelling approach, the authors demonstrate that a minimum distance is required between the electrode line and the geomembrane to satisfy the good conditions of use of the classical inversion tools. This distance is a function of the electrode line length (i.e. of the unit electrode spacing) used, the array type and the orientation of the electrode line. Moreover, this study shows that if this criterion on the minimum distance is not satisfied, it is possible to significantly improve the inversion process by introducing the complex geometry and the geomembrane location into the inversion tools. These results are finally validated on a field data set gathered on a small municipal solid waste landfill cell where this minimum distance criterion cannot be satisfied. Copyright © 2014 Elsevier Ltd. All rights reserved.

  4. Predicting the Atmospheric Composition of Extrasolar Giant Planets

    NASA Technical Reports Server (NTRS)

    Sharp, A. G.; Moses, J. I.; Friedson, A. J.; Fegley, B., Jr.; Marley, M. S.; Lodders, K.

    2004-01-01

    To date, approximately 120 planet-sized objects have been discovered around other stars, mostly through the radial-velocity technique. This technique can provide information about a planet s minimum mass and its orbital period and distance; however, few other planetary data can be obtained at this point in time unless we are fortunate enough to find an extrasolar giant planet that transits its parent star (i.e., the orbit is edge-on as seen from Earth). In that situation, many physical properties of the planet and its parent star can be determined, including some compositional information. Our prospects of directly obtaining spectra from extrasolar planets may improve in the near future, through missions like NASA's Terrestrial Planet Finder. Most of the extrasolar giant planets (EGPs) discovered so far have masses equal to or greater than Jupiter's mass, and roughly 16% have orbital radii less than 0.1 AU - extremely close to the parent star by our own Solar-System standards (note that Mercury is located at a mean distance of 0.39 AU and Jupiter at 5.2 AU from the Sun). Although all EGPs are expected to have hydrogen-dominated atmospheres similar to Jupiter, the orbital distance can strongly affect the planet's temperature, physical, chemical, and spectral properties, and the abundance of minor, detectable atmospheric constituents. Thermochemical equilibrium models can provide good zero-order predictions for the atmospheric composition of EGPs. However, both the composition and spectral properties will depend in large part on disequilibrium processes like photochemistry, chemical kinetics, atmospheric transport, and haze formation. We have developed a photochemical kinetics, radiative transfer, and 1-D vertical transport model to study the atmospheric composition of EGPs. The chemical reaction list contains H-, C-, O-, and N-bearing species and is designed to be valid for atmospheric temperatures ranging from 100-3000 K and pressures up to 50 bar. Here we examine the effect of stellar distance (e.g., incident ultraviolet flux, atmospheric temperature) on the chemical properties of EGPs. The model is applied to two generic Class II and III intermediate temperature EGPs located at 3.3 and 0.27 AU from a solar-like parent star, and the results are compared with a model for Jupiter at 5.2 AU.

  5. Ant colony optimization for solving university facility layout problem

    NASA Astrophysics Data System (ADS)

    Mohd Jani, Nurul Hafiza; Mohd Radzi, Nor Haizan; Ngadiman, Mohd Salihin

    2013-04-01

    Quadratic Assignment Problems (QAP) is classified as the NP hard problem. It has been used to model a lot of problem in several areas such as operational research, combinatorial data analysis and also parallel and distributed computing, optimization problem such as graph portioning and Travel Salesman Problem (TSP). In the literature, researcher use exact algorithm, heuristics algorithm and metaheuristic approaches to solve QAP problem. QAP is largely applied in facility layout problem (FLP). In this paper we used QAP to model university facility layout problem. There are 8 facilities that need to be assigned to 8 locations. Hence we have modeled a QAP problem with n ≤ 10 and developed an Ant Colony Optimization (ACO) algorithm to solve the university facility layout problem. The objective is to assign n facilities to n locations such that the minimum product of flows and distances is obtained. Flow is the movement from one to another facility, whereas distance is the distance between one locations of a facility to other facilities locations. The objective of the QAP is to obtain minimum total walking (flow) of lecturers from one destination to another (distance).

  6. 14 CFR 91.177 - Minimum altitudes for IFR operations.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ..., an altitude of 2,000 feet above the highest obstacle within a horizontal distance of 4 nautical miles from the course to be flown; or (ii) In any other case, an altitude of 1,000 feet above the highest... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Minimum altitudes for IFR operations. 91...

  7. What Is the Optimal Minimum Penetration Depth for "All-Inside" Meniscal Repairs?

    PubMed

    McCulloch, Patrick C; Jones, Hugh L; Lue, Jeffrey; Parekh, Jesal N; Noble, Philip C

    2016-08-01

    To identify desired minimum depth setting for safe, effective placement of the all-inside meniscal suture anchors. Using 16 cadaveric knees and standard arthroscopic techniques, 3-dimensional surfaces of the meniscocapsular junction and posterior capsule were digitized. Using standard anteromedial and anterolateral portals, the distance from the meniscocapsular junction to the posterior capsule outer wall was measured for 3 locations along the posterior half of medial and lateral menisci. Multiple all-inside meniscal repairs were performed on 7 knees to determine an alternate measure of capsular thickness (X2) and compared with the digitized results. In the digitized group, the distance (X1) from the capsular junction to the posterior capsular wall was averaged in both menisci for 3 regions using anteromedial and anterolateral portals. Mean distances of 6.4 to 8.8 mm were found for the lateral meniscus and 6.5 to 9.1 mm for the medial meniscus. The actual penetration depth was determined in the repair group and labeled X2. It showed a similar pattern to the variation seen in X1 by region, although it exceeded predicted distances an average 1.7 mm in the medial and 1.5 mm in the lateral meniscus owing to visible deformation of the capsule as it pierced. Capsular thickness during arthroscopic repair measures approximately 6 to 9 mm (X1), with 1.5 to 2 mm additional depth needed to ensure penetration rather than bulging of the posterior capsule (X2), resulting in 8 to 10 mm minimum penetration depth range. Surgeons can add desired distance away from the meniscocapsular junction (L) at device implantation, finding optimal minimal setting for penetration depth (X2 + L), which for most repairable tears may be as short as 8 mm and not likely to be greater than 16 mm. Minimum depth setting for optimal placement of all-inside meniscal suture anchors when performing all-inside repair of the medial or lateral meniscus reduces risk of harming adjacent structures secondary to overpenetration and underpenetration of the posterior capsule. Copyright © 2016 Arthroscopy Association of North America. Published by Elsevier Inc. All rights reserved.

  8. Spatial analyses for nonoverlapping objects with size variations and their application to coral communities.

    PubMed

    Muko, Soyoka; Shimatani, Ichiro K; Nozawa, Yoko

    2014-07-01

    Spatial distributions of individuals are conventionally analysed by representing objects as dimensionless points, in which spatial statistics are based on centre-to-centre distances. However, if organisms expand without overlapping and show size variations, such as is the case for encrusting corals, interobject spacing is crucial for spatial associations where interactions occur. We introduced new pairwise statistics using minimum distances between objects and demonstrated their utility when examining encrusting coral community data. We also calculated the conventional point process statistics and the grid-based statistics to clarify the advantages and limitations of each spatial statistical method. For simplicity, coral colonies were approximated by disks in these demonstrations. Focusing on short-distance effects, the use of minimum distances revealed that almost all coral genera were aggregated at a scale of 1-25 cm. However, when fragmented colonies (ramets) were treated as a genet, a genet-level analysis indicated weak or no aggregation, suggesting that most corals were randomly distributed and that fragmentation was the primary cause of colony aggregations. In contrast, point process statistics showed larger aggregation scales, presumably because centre-to-centre distances included both intercolony spacing and colony sizes (radius). The grid-based statistics were able to quantify the patch (aggregation) scale of colonies, but the scale was strongly affected by the colony size. Our approach quantitatively showed repulsive effects between an aggressive genus and a competitively weak genus, while the grid-based statistics (covariance function) also showed repulsion although the spatial scale indicated from the statistics was not directly interpretable in terms of ecological meaning. The use of minimum distances together with previously proposed spatial statistics helped us to extend our understanding of the spatial patterns of nonoverlapping objects that vary in size and the associated specific scales. © 2013 The Authors. Journal of Animal Ecology © 2013 British Ecological Society.

  9. [Minimum Standards for the Spatial Accessibility of Primary Care: A Systematic Review].

    PubMed

    Voigtländer, S; Deiters, T

    2015-12-01

    Regional disparities of access to primary care are substantial in Germany, especially in terms of spatial accessibility. However, there is no legally or generally binding minimum standard for the spatial accessibility effort that is still acceptable. Our objective is to analyse existing minimum standards, the methods used as well as their empirical basis. A systematic literature review was undertaken of publications regarding minimum standards for the spatial accessibility of primary care based on a title word and keyword search using PubMed, SSCI/Web of Science, EMBASE and Cochrane Library. 8 minimum standards from the USA, Germany and Austria could be identified. All of them specify the acceptable spatial accessibility effort in terms of travel time; almost half include also distance(s). The travel time maximum, which is acceptable, is 30 min and it tends to be lower in urban areas. Primary care is, according to the identified minimum standards, part of the local area (Nahbereich) of so-called central places (Zentrale Orte) providing basic goods and services. The consideration of means of transport, e. g. public transport, is heterogeneous. The standards are based on empirical studies, consultation with service providers, practical experiences, and regional planning/central place theory as well as on legal or political regulations. The identified minimum standards provide important insights into the effort that is still acceptable regarding spatial accessibility, i. e. travel time, distance and means of transport. It seems reasonable to complement the current planning system for outpatient care, which is based on provider-to-population ratios, by a gravity-model method to identify places as well as populations with insufficient spatial accessibility. Due to a lack of a common minimum standard we propose - subject to further discussion - to begin with a threshold based on the spatial accessibility limit of the local area, i. e. 30 min to the next primary care provider for at least 90% of the regional population. The exceeding of the threshold would necessitate a discussion of a health care deficit and in line with this a potential need for intervention, e. g. in terms of alternative forms of health care provision. © Georg Thieme Verlag KG Stuttgart · New York.

  10. First DNA Barcode Reference Library for the Identification of South American Freshwater Fish from the Lower Paraná River

    PubMed Central

    Brancolini, Florencia; del Pazo, Felipe; Posner, Victoria Maria; Grimberg, Alexis; Arranz, Silvia Eda

    2016-01-01

    Valid fish species identification is essential for biodiversity conservation and fisheries management. Here, we provide a sequence reference library based on mitochondrial cytochrome c oxidase subunit I for a valid identification of 79 freshwater fish species from the Lower Paraná River. Neighbour-joining analysis based on K2P genetic distances formed non-overlapping clusters for almost all species with a ≥99% bootstrap support each. Identification was successful for 97.8% of species as the minimum genetic distance to the nearest neighbour exceeded the maximum intraspecific distance in all these cases. A barcoding gap of 2.5% was apparent for the whole data set with the exception of four cases. Within-species distances ranged from 0.00% to 7.59%, while interspecific distances varied between 4.06% and 19.98%, without considering Odontesthes species with a minimum genetic distance of 0%. Sequence library validation was performed by applying BOLDs BIN analysis tool, Poisson Tree Processes model and Automatic Barcode Gap Discovery, along with a reliable taxonomic assignment by experts. Exhaustive revision of vouchers was performed when a conflicting assignment was detected after sequence analysis and BIN discordance evaluation. Thus, the sequence library presented here can be confidently used as a benchmark for identification of half of the fish species recorded for the Lower Paraná River. PMID:27442116

  11. Classification and recognition of dynamical models: the role of phase, independent components, kernels and optimal transport.

    PubMed

    Bissacco, Alessandro; Chiuso, Alessandro; Soatto, Stefano

    2007-11-01

    We address the problem of performing decision tasks, and in particular classification and recognition, in the space of dynamical models in order to compare time series of data. Motivated by the application of recognition of human motion in image sequences, we consider a class of models that include linear dynamics, both stable and marginally stable (periodic), both minimum and non-minimum phase, driven by non-Gaussian processes. This requires extending existing learning and system identification algorithms to handle periodic modes and nonminimum phase behavior, while taking into account higher-order statistics of the data. Once a model is identified, we define a kernel-based cord distance between models that includes their dynamics, their initial conditions as well as input distribution. This is made possible by a novel kernel defined between two arbitrary (non-Gaussian) distributions, which is computed by efficiently solving an optimal transport problem. We validate our choice of models, inference algorithm, and distance on the tasks of human motion synthesis (sample paths of the learned models), and recognition (nearest-neighbor classification in the computed distance). However, our work can be applied more broadly where one needs to compare historical data while taking into account periodic trends, non-minimum phase behavior, and non-Gaussian input distributions.

  12. Relation between inflammables and ignition sources in aircraft environments

    NASA Technical Reports Server (NTRS)

    Scull, Wilfred E

    1951-01-01

    A literature survey was conducted to determine the relation between aircraft ignition sources and inflammables. Available literature applicable to the problem of aircraft fire hazards is analyzed and discussed. Data pertaining to the effect of many variables on ignition temperatures, minimum ignition pressures, minimum spark-ignition energies of inflammables, quenching distances of electrode configurations, and size of openings through which flame will not propagate are presented and discussed. Ignition temperatures and limits of inflammability of gasoline in air in different test environments, and the minimum ignition pressures and minimum size of opening for flame propagation in gasoline-air mixtures are included; inerting of gasoline-air mixtures is discussed.

  13. Space availability in confined sheep during pregnancy, effects in movement patterns and use of space.

    PubMed

    Averós, Xavier; Lorea, Areta; Beltrán de Heredia, Ignacia; Arranz, Josune; Ruiz, Roberto; Estevez, Inma

    2014-01-01

    Space availability is essential to grant the welfare of animals. To determine the effect of space availability on movement and space use in pregnant ewes (Ovis aries), 54 individuals were studied during the last 11 weeks of gestation. Three treatments were tested (1, 2, and 3 m2/ewe; 6 ewes/group). Ewes' positions were collected for 15 minutes using continuous scan samplings two days/week. Total and net distance, net/total distance ratio, maximum and minimum step length, movement activity, angular dispersion, nearest, furthest and mean neighbour distance, peripheral location ratio, and corrected peripheral location ratio were calculated. Restriction in space availability resulted in smaller total travelled distance, net to total distance ratio, maximum step length, and angular dispersion but higher movement activity at 1 m2/ewe as compared to 2 and 3 m2/ewe (P<0.01). On the other hand, nearest and furthest neighbour distances increased from 1 to 3 m2/ewe (P<0.001). Largest total distance, maximum and minimum step length, and movement activity, as well as lowest net/total distance ratio and angular dispersion were observed during the first weeks (P<0.05) while inter-individual distances increased through gestation. Results indicate that movement patterns and space use in ewes were clearly restricted by limitations of space availability to 1 m2/ewe. This reflected in shorter, more sinuous trajectories composed of shorter steps, lower inter-individual distances and higher movement activity potentially linked with higher restlessness levels. On the contrary, differences between 2 and 3 m2/ewe, for most variables indicate that increasing space availability from 2 to 3 m2/ewe would appear to have limited benefits, reflected mostly in a further increment in the inter-individual distances among group members. No major variations in spatial requirements were detected through gestation, except for slight increments in inter-individual distances and an initial adaptation period, with ewes being restless and highly motivated to explore their new environment.

  14. Effect of dopant on electrical properties of PVA doped NaF polymer electrolyte films

    NASA Astrophysics Data System (ADS)

    Irfan, Mohammed; Razikha Banu, S.; Manjunath, A.; Mahesh, S. S.

    2018-05-01

    Polymer electrolyte films of Poly (vinyl alcohol) (PVA) doped with Sodium fluoride (NaF) of different weight ratios (6, 8 and 10 wt %) were prepared by solution casting method. We observed that AC conductivity was found to increase with rise in temperature and frequency with slope S ranging from 0.7 to 0.9. The Correlated Barrier Hopping (CBH) model is used because the value of S is temperature dependent and its value decreases by increasing temperature. The dielectric constant has high values in the low frequency region; this is due to the existence of various types of polarization mechanisms. The X-ray diffraction (XRD) diagram of pure PVA shows a characteristic peak at 2θ=19.490 indicating its semi-crystalline nature. On the incorporation of NaF salt into the polymer, the intensity of peak decreases gradually, suggesting a decrease in the degree of crystallinity of the complex. The CBH model is used to calculate the polaron binding energy (WM), the Hoping distance (R), the minimum hoping distance (Rmin) and the activation energy (Ea) results are discussed.

  15. A Classroom Note on: The Average Distance in an Ellipse

    ERIC Educational Resources Information Center

    Gordon, Sheldon P.

    2011-01-01

    This article presents an applied calculus exercise that can be easily shared with students. One of Kepler's greatest discoveries was the fact that the planets move in elliptic orbits with the sun at one focus. Astronomers characterize the orbits of particular planets by their minimum and maximum distances to the sun, known respectively as the…

  16. Improvements in Spectrum's fit to program data tool.

    PubMed

    Mahiane, Severin G; Marsh, Kimberly; Grantham, Kelsey; Crichlow, Shawna; Caceres, Karen; Stover, John

    2017-04-01

    The Joint United Nations Program on HIV/AIDS-supported Spectrum software package (Glastonbury, Connecticut, USA) is used by most countries worldwide to monitor the HIV epidemic. In Spectrum, HIV incidence trends among adults (aged 15-49 years) are derived by either fitting to seroprevalence surveillance and survey data or generating curves consistent with program and vital registration data, such as historical trends in the number of newly diagnosed infections or people living with HIV and AIDS related deaths. This article describes development and application of the fit to program data (FPD) tool in Joint United Nations Program on HIV/AIDS' 2016 estimates round. In the FPD tool, HIV incidence trends are described as a simple or double logistic function. Function parameters are estimated from historical program data on newly reported HIV cases, people living with HIV or AIDS-related deaths. Inputs can be adjusted for proportions undiagnosed or misclassified deaths. Maximum likelihood estimation or minimum chi-squared distance methods are used to identify the best fitting curve. Asymptotic properties of the estimators from these fits are used to estimate uncertainty. The FPD tool was used to fit incidence for 62 countries in 2016. Maximum likelihood and minimum chi-squared distance methods gave similar results. A double logistic curve adequately described observed trends in all but four countries where a simple logistic curve performed better. Robust HIV-related program and vital registration data are routinely available in many middle-income and high-income countries, whereas HIV seroprevalence surveillance and survey data may be scarce. In these countries, the FPD tool offers a simpler, improved approach to estimating HIV incidence trends.

  17. Comparison of progressive addition lenses by direct measurement of surface shape.

    PubMed

    Huang, Ching-Yao; Raasch, Thomas W; Yi, Allen Y; Bullimore, Mark A

    2013-06-01

    To compare the optical properties of five state-of-the-art progressive addition lenses (PALs) by direct physical measurement of surface shape. Five contemporary freeform PALs (Varilux Comfort Enhanced, Varilux Physio Enhanced, Hoya Lifestyle, Shamir Autograph, and Zeiss Individual) with plano distance power and a +2.00-diopter add were measured with a coordinate measuring machine. The front and back surface heights were physically measured, and the optical properties of each surface, and their combination, were calculated with custom MATLAB routines. Surface shape was described as the sum of Zernike polynomials. Progressive addition lenses were represented as contour plots of spherical equivalent power, cylindrical power, and higher order aberrations (HOAs). Maximum power rate, minimum 1.00-DC corridor width, percentage of lens area with less than 1.00 DC, and root mean square of HOAs were also compared. Comfort Enhanced and Physio Enhanced have freeform front surfaces, Shamir Autograph and Zeiss Individual have freeform back surfaces, and Hoya Lifestyle has freeform properties on both surfaces. However, the overall optical properties are similar, regardless of the lens design. The maximum power rate is between 0.08 and 0.12 diopters per millimeter and the minimum corridor width is between 8 and 11 mm. For a 40-mm lens diameter, the percentage of lens area with less than 1.00 DC is between 64 and 76%. The third-order Zernike terms are the dominant high-order terms in HOAs (78 to 93% of overall shape variance). Higher order aberrations are higher along the corridor area and around the near zone. The maximum root mean square of HOAs based on a 4.5-mm pupil size around the corridor area is between 0.05 and 0.06 µm. This nonoptical method using a coordinate measuring machine can be used to evaluate a PAL by surface height measurements, with the optical properties directly related to its front and back surface designs.

  18. Pt/Au nanoalloy supported on alumina and chlorided alumina: DFT and experimental analysis

    NASA Astrophysics Data System (ADS)

    Sharifi, N.; Falamaki, C.; Ghorbanzadeh Ahangari, M.

    2018-04-01

    Density functional theory (DFT) was used to explore the adsorption of Pt/Au nanoalloy onto a pure and chlorided γ-Al2O3(110) surface, which has been applied in numerous catalytic reactions. First, we considered the adsorption properties of Pt clusters (n ≤ 5) onto the Al2O3(110) surface to determine the most stable Pt cluster on alumina surface in reforming processes. After full structural relaxations of Pt clusters at various configurations on alumina, our computed results expressed that the minimum binding energy (‑5.67 eV) is accrued for Pt4 cluster and the distance between the nearest Pt atom in the cluster to the alumina surface is equal to 1.13 Å. Then, we investigated the binding energies, geometries, and electronic properties of adsorbed Aun clusters (n ≤ 6) on the γ-Al2O3(110) surface. Our studied showed that Au5 was the most thermodynamically stable structure on γ-Al2O3. Finally, we inspected these properties for adsorbed Au clusters onto the Pt4-decorated alumina (Aun/Pt4-alumina) system. The binding energy of the Au4/Pt4-alumina system was ‑5.01 eV, and the distance between Au4 cluster and Pt4-alumina was 1.33 Å. The Au4/Pt4alumina system was found to be the most stable nanometer-sized catalyst design. At last, our first-principles calculations predicted that the best position of embedment Cl on the Au4/Pt4-alumina.

  19. Oleate-based hydrothermal preparation of CoFe2O4 nanoparticles, and their magnetic properties with respect to particle size and surface coating

    NASA Astrophysics Data System (ADS)

    Repko, Anton; Vejpravová, Jana; Vacková, Taťana; Zákutná, Dominika; Nižňanský, Daniel

    2015-09-01

    We present a facile and high-yield synthesis of cobalt ferrite nanoparticles by hydrothermal hydrolysis of Co-Fe oleate in the presence of pentanol/octanol/toluene and water at 180 or 220 °C. The particle size (6-10 nm) was controlled by the composition of the organic solvent and temperature. Magnetic properties were then investigated with respect to the particle size and surface modification with citric acid or titanium dioxide (leading to hydrophilic particles). The as-prepared hydrophobic nanoparticles (coated by oleic acid) had a minimum inter-particle distance of 2.5 nm. Their apparent blocking temperature (estimated as a maximum of the zero-field-cooled magnetization) was 180 K, 280 K and 330 K for the particles with size of 6, 9 and 10.5 nm, respectively. Replacement of oleic acid on the surface by citric acid decreased inter-particle distance to less than 1 nm, and increased blocking temperature by ca. 10 K. On the other hand, coating with titanium dioxide, supported by nitrilotri(methylphosphonic acid), caused increase of the particle spacing, and lowering of the blocking temperature by ca. 20 K. The CoFe2O4@TiO2 nanoparticles were sufficiently stable in water, methanol and ethanol. The particles were also investigated by Mössbauer spectroscopy and alternating-current (AC) susceptibility measurements, and their analysis with Vögel-Fulcher and power law. Effect of different particle coating and dipolar interactions on the magnetic properties is discussed.

  20. Planar Steering of a Single Ferrofluid Drop by Optimal Minimum Power Dynamic Feedback Control of Four Electromagnets at a Distance

    PubMed Central

    Probst, R.; Lin, J.; Komaee, A.; Nacev, A.; Cummins, Z.

    2010-01-01

    Any single permanent or electro magnet will always attract a magnetic fluid. For this reason it is difficult to precisely position and manipulate ferrofluid at a distance from magnets. We develop and experimentally demonstrate optimal (minimum electrical power) 2-dimensional manipulation of a single droplet of ferrofluid by feedback control of 4 external electromagnets. The control algorithm we have developed takes into account, and is explicitly designed for, the nonlinear (fast decay in space, quadratic in magnet strength) nature of how the magnets actuate the ferrofluid, and it also corrects for electro-magnet charging time delays. With this control, we show that dynamic actuation of electro-magnets held outside a domain can be used to position a droplet of ferrofluid to any desired location and steer it along any desired path within that domain – an example of precision control of a ferrofluid by magnets acting at a distance. PMID:21218157

  1. MOnthly TEmperature DAtabase of Spain 1951-2010: MOTEDAS (2): The Correlation Decay Distance (CDD) and the spatial variability of maximum and minimum monthly temperature in Spain during (1981-2010).

    NASA Astrophysics Data System (ADS)

    Cortesi, Nicola; Peña-Angulo, Dhais; Simolo, Claudia; Stepanek, Peter; Brunetti, Michele; Gonzalez-Hidalgo, José Carlos

    2014-05-01

    One of the key point in the develop of the MOTEDAS dataset (see Poster 1 MOTEDAS) in the framework of the HIDROCAES Project (Impactos Hidrológicos del Calentamiento Global en España, Spanish Ministery of Research CGL2011-27574-C02-01) is the reference series for which no generalized metadata exist. In this poster we present an analysis of spatial variability of monthly minimum and maximum temperatures in the conterminous land of Spain (Iberian Peninsula, IP), by using the Correlation Decay Distance function (CDD), with the aim of evaluating, at sub-regional level, the optimal threshold distance between neighbouring stations for producing the set of reference series used in the quality control (see MOTEDAS Poster 1) and the reconstruction (see MOREDAS Poster 3). The CDD analysis for Tmax and Tmin was performed calculating a correlation matrix at monthly scale between 1981-2010 among monthly mean values of maximum (Tmax) and minimum (Tmin) temperature series (with at least 90% of data), free of anomalous data and homogenized (see MOTEDAS Poster 1), obtained from AEMEt archives (National Spanish Meteorological Agency). Monthly anomalies (difference between data and mean 1981-2010) were used to prevent the dominant effect of annual cycle in the CDD annual estimation. For each station, and time scale, the common variance r2 (using the square of Pearson's correlation coefficient) was calculated between all neighbouring temperature series and the relation between r2 and distance was modelled according to the following equation (1): Log (r2ij) = b*°dij (1) being Log(rij2) the common variance between target (i) and neighbouring series (j), dij the distance between them and b the slope of the ordinary least-squares linear regression model applied taking into account only the surrounding stations within a starting radius of 50 km and with a minimum of 5 stations required. Finally, monthly, seasonal and annual CDD values were interpolated using the Ordinary Kriging with a spherical variogram over conterminous land of Spain, and converted on a regular 10 km2 grid (resolution similar to the mean distance between stations) to map the results. In the conterminous land of Spain the distance at which couples of stations have a common variance in temperature (both maximum Tmax, and minimum Tmin) above the selected threshold (50%, r Pearson ~0.70) on average does not exceed 400 km, with relevant spatial and temporal differences. The spatial distribution of the CDD shows a clear coastland-to-inland gradient at annual, seasonal and monthly scale, with highest spatial variability along the coastland areas and lower variability inland. The highest spatial variability coincide particularly with coastland areas surrounded by mountain chains and suggests that the orography is one of the most driving factor causing higher interstation variability. Moreover, there are some differences between the behaviour of Tmax and Tmin, being Tmin spatially more homogeneous than Tmax, but its lower CDD values indicate that night-time temperature is more variable than diurnal one. The results suggest that in general local factors affects the spatial variability of monthly Tmin more than Tmax and then higher network density would be necessary to capture the higher spatial variability highlighted for Tmin respect to Tmax. The results suggest that in general local factors affects the spatial variability of Tmin more than Tmax and then higher network density would be necessary to capture the higher spatial variability highlighted for minimum temperature respect to maximum temperature. A conservative distance for reference series could be evaluated in 200 km, that we propose for continental land of Spain and use in the development of MOTEDAS.

  2. The Effects of Long Distance Running on Preadolescent Children.

    ERIC Educational Resources Information Center

    Covington, N. Kay

    This study investigated the effects of selected physiological variables on preadolescent male and female long distance runners. The trained group was comprised of 20 children between the ages of 8 and 10 who had been running a minimum of 20 miles per week for two months or longer. The control group was made up of 20 children of the same ages who…

  3. Optimizing the Launch of a Projectile to Hit a Target

    ERIC Educational Resources Information Center

    Mungan, Carl E.

    2017-01-01

    Some teenagers are exploring the outer perimeter of a castle. They notice a spy hole in its wall, across the moat a horizontal distance "x" and vertically up the wall a distance "y." They decide to throw pebbles at the hole. One girl wants to use physics to throw with the minimum speed necessary to hit the hole. What is the…

  4. Relation Between Inflammables and Ignition Sources in Aircraft Environments

    NASA Technical Reports Server (NTRS)

    Scull, Wilfred E

    1950-01-01

    A literature survey was conducted to determine the relation between aircraft ignition sources and inflammables. Available literature applicable to the problem of aircraft fire hazards is analyzed and, discussed herein. Data pertaining to the effect of many variables on ignition temperatures, minimum ignition pressures, and minimum spark-ignition energies of inflammables, quenching distances of electrode configurations, and size of openings incapable of flame propagation are presented and discussed. The ignition temperatures and the limits of inflammability of gasoline in air in different test environments, and the minimum ignition pressure and the minimum size of openings for flame propagation of gasoline - air mixtures are included. Inerting of gasoline - air mixtures is discussed.

  5. Transport of Escherichia coli in 25 m quartz sand columns

    NASA Astrophysics Data System (ADS)

    Lutterodt, G.; Foppen, J. W. A.; Maksoud, A.; Uhlenbrook, S.

    2011-01-01

    To help improve the prediction of bacteria travel distances in aquifers laboratory experiments were conducted to measure the distant dependent sticking efficiencies of two low attaching Escherichia coli strains (UCFL-94 and UCFL-131). The experimental set up consisted of a 25 m long helical column with a diameter of 3.2 cm packed with 99.1% pure-quartz sand saturated with a solution of magnesium sulfate and calcium chloride. Bacteria mass breakthrough at sampling distances ranging from 6 to 25.65 m were observed to quantify bacteria attachment over total transport distances ( αL) and sticking efficiencies at large intra-column segments ( αi) (> 5 m). Fractions of cells retained ( Fi) in a column segment as a function of αi were fitted with a power-law distribution from which the minimum sticking efficiency defined as the sticking efficiency of 0.001% bacteria fraction of the total input mass retained that results in a 5 log removal were extrapolated. Low values of αL in the order 10 - 4 and 10 - 3 were obtained for UCFL-94 and UCFL-131 respectively, while αi-values ranged between 10 - 6 to 10 - 3 for UCFL-94 and 10 - 5 to 10 - 4 for UCFL-131. In addition, both αL and αi reduced with increasing transport distance, and high coefficients of determination (0.99) were obtained for power-law distributions of αi for the two strains. Minimum sticking efficiencies extrapolated were 10 - 7 and 10 - 8 for UCFL-94 and UCFL-131, respectively. Fractions of cells exiting the column were 0.19 and 0.87 for UCFL-94 and UCL-131, respectively. We concluded that environmentally realistic sticking efficiency values in the order of 10 - 4 and 10 - 3 and much lower sticking efficiencies in the order 10 - 5 are measurable in the laboratory, Also power-law distributions in sticking efficiencies commonly observed for limited intra-column distances (< 2 m) are applicable at large transport distances(> 6 m) in columns packed with quartz grains. High fractions of bacteria populations may possess the so-called minimum sticking efficiency, thus expressing their ability to be transported over distances longer than what might be predicted using measured sticking efficiencies from experiments with both short (< 1 m) and long columns (> 25 m). Also variable values of sticking efficiencies within and among the strains show heterogeneities possibly due to variations in cell surface characteristics of the strains. The low sticking efficiency values measured express the importance of the long columns used in the experiments and the lower values of extrapolated minimum sticking efficiencies makes the method a valuable tool in delineating protection areas in real-world scenarios.

  6. Read distance performance and variation of 5 low-frequency radio frequency identification panel transceiver manufacturers.

    PubMed

    Ryan, S E; Blasi, D A; Anglin, C O; Bryant, A M; Rickard, B A; Anderson, M P; Fike, K E

    2010-07-01

    Use of electronic animal identification technologies by livestock managers is increasing, but performance of these technologies can be variable when used in livestock production environments. This study was conducted to determine whether 1) read distance of low-frequency radio frequency identification (RFID) transceivers is affected by type of transponder being interrogated; 2) read distance variation of low-frequency RFID transceivers is affected by transceiver manufacturer; and 3) read distance of various transponder-transceiver manufacturer combinations meet the 2004 United States Animal Identification Plan (USAIP) bovine standards subcommittee minimum read distance recommendation of 60 cm. Twenty-four transceivers (n = 5 transceivers per manufacturer for Allflex, Boontech, Farnam, and Osborne; n = 4 transceivers for Destron Fearing) were tested with 60 transponders [n = 10 transponders per type for Allflex full duplex B (FDX-B), Allflex half duplex (HDX), Destron Fearing FDX-B, Farnam FDX-B, and Y-Tex FDX-B; n = 6 for Temple FDX-B (EM Microelectronic chip); and n = 4 for Temple FDX-B (HiTag chip)] presented in the parallel orientation. All transceivers and transponders met International Organization for Standardization 11784 and 11785 standards. Transponders represented both one-half duplex and full duplex low-frequency air interface technologies. Use of a mechanical trolley device enabled the transponders to be presented to the center of each transceiver at a constant rate, thereby reducing human error. Transponder and transceiver manufacturer interacted (P < 0.0001) to affect read distance, indicating that transceiver performance was greatly dependent upon the transponder type being interrogated. Twenty-eight of 30 combinations of transceivers and transponders evaluated met the minimum recommended USAIP read distance. The mean read distance across all 30 combinations was 45.1 to 129.4 cm. Transceiver manufacturer and transponder type interacted to affect read distance variance (P < 0.05). Maximum read distance performance of low-frequency RFID technologies with low variance can be achieved by selecting specific transponder-transceiver combinations.

  7. Computational fluid dynamics (CFD) investigation of impacts of an obstruction on airflow in underground mines.

    PubMed

    Zhou, L; Goodman, G; Martikainen, A

    2013-01-01

    Continuous airflow monitoring can improve the safety of the underground work force by ensuring the uninterrupted and controlled distribution of mine ventilation to all working areas. Air velocity measurements vary significantly and can change rapidly depending on the exact measurement location and, in particular, due to the presence of obstructions in the air stream. Air velocity must be measured at locations away from obstructions to avoid the vortices and eddies that can produce inaccurate readings. Further, an uninterrupted measurement path cannot always be guaranteed when using continuous airflow monitors due to the presence of nearby equipment, personnel, roof falls and rib rolls. Effective use of these devices requires selection of a minimum distance from an obstacle, such that an air velocity measurement can be made but not affected by the presence of that obstacle. This paper investigates the impacts of an obstruction on the behavior of downstream airflow using a numerical CFD model calibrated with experimental test results from underground testing. Factors including entry size, obstruction size and the inlet or incident velocity are examined for their effects on the distributions of airflow around an obstruction. A relationship is developed between the minimum measurement distance and the hydraulic diameters of the entry and the obstruction. A final analysis considers the impacts of continuous monitor location on the accuracy of velocity measurements and on the application of minimum measurement distance guidelines.

  8. Computational fluid dynamics (CFD) investigation of impacts of an obstruction on airflow in underground mines

    PubMed Central

    Zhou, L.; Goodman, G.; Martikainen, A.

    2015-01-01

    Continuous airflow monitoring can improve the safety of the underground work force by ensuring the uninterrupted and controlled distribution of mine ventilation to all working areas. Air velocity measurements vary significantly and can change rapidly depending on the exact measurement location and, in particular, due to the presence of obstructions in the air stream. Air velocity must be measured at locations away from obstructions to avoid the vortices and eddies that can produce inaccurate readings. Further, an uninterrupted measurement path cannot always be guaranteed when using continuous airflow monitors due to the presence of nearby equipment, personnel, roof falls and rib rolls. Effective use of these devices requires selection of a minimum distance from an obstacle, such that an air velocity measurement can be made but not affected by the presence of that obstacle. This paper investigates the impacts of an obstruction on the behavior of downstream airflow using a numerical CFD model calibrated with experimental test results from underground testing. Factors including entry size, obstruction size and the inlet or incident velocity are examined for their effects on the distributions of airflow around an obstruction. A relationship is developed between the minimum measurement distance and the hydraulic diameters of the entry and the obstruction. A final analysis considers the impacts of continuous monitor location on the accuracy of velocity measurements and on the application of minimum measurement distance guidelines. PMID:26388684

  9. Association between mild cognitive impairment and trajectory-based spatial parameters during timed up and go test using a laser range sensor.

    PubMed

    Nishiguchi, Shu; Yorozu, Ayanori; Adachi, Daiki; Takahashi, Masaki; Aoyama, Tomoki

    2017-08-08

    The Timed Up and Go (TUG) test may be a useful tool to detect not only mobility impairment but also possible cognitive impairment. In this cross-sectional study, we used the TUG test to investigate the associations between trajectory-based spatial parameters measured by laser range sensor (LRS) and cognitive impairment in community-dwelling older adults. The participants were 63 community-dwelling older adults (mean age, 73.0 ± 6.3 years). The trajectory-based spatial parameters during the TUG test were measured using an LRS. In each forward and backward phase, we calculated the minimum distance from the marker, the maximum distance from the x-axis (center line), the length of the trajectories, and the area of region surrounded by the trajectory of the center of gravity and the x-axis (center line). We measured mild cognitive impairment using the Mini-Mental State Examination score (26/27 was the cut-off score for defining mild cognitive impairment). Compared with participants with normal cognitive function, those with mild cognitive impairment exhibited the following trajectory-based spatial parameters: short minimum distance from the marker (p = 0.044), narrow area of center of gravity in the forward phase (p = 0.012), and a large forward/whole phase ratio of the area of the center of gravity (p = 0.026) during the TUG test. In multivariate logistic regression analyses, a short minimum distance from the marker (odds ratio [OR]: 0.82, 95% confidence interval [CI]: 0.69-0.98), narrow area of the center of gravity in the forward phase (OR: 0.01, 95% CI: 0.00-0.36), and large forward/whole phase ratio of the area of the center of gravity (OR: 0.94, 95% CI: 0.88-0.99) were independently associated with mild cognitive impairment. In conclusion, our results indicate that some of the trajectory-based spatial parameters measured by LRS during the TUG test were independently associated with cognitive impairment in older adults. In particular, older adults with cognitive impairment exhibit shorter minimum distances from the marker and asymmetrical trajectories during the TUG test.

  10. Off-Resonant Two-Photon Absorption Cross-Section Enhancement of an Organic Chromophore on Gold Nanorods

    PubMed Central

    Sivapalan, Sean T.; Vella, Jarrett H.; Yang, Timothy K.; Dalton, Matthew J.; Haley, Joy E.; Cooper, Thomas M.; Urbas, Augustine M.; Tan, Loon-Seng; Murphy, Catherine J.

    2013-01-01

    Surface-plasmon-initiated interference effects of polyelectrolyte-coated gold nanorods on the two-photon absorption of an organic chromophore were investigated. With polyelectrolyte bearing gold nanorods of 2,4,6 and 8 layers, the role of the plasmonic fields as function of distance on such effects was examined. An unusual distance dependence was found: enhancements in the two-photon cross-section were at a minimum at an intermediate distance, then rose again at a further distance. The observed values of enhancement were compared to theoretical predictions using finite element analysis and showed good agreementdue to constructive and destructive interference effects. PMID:23687561

  11. Synthesis and coordinating ability of an anionic cobaltabisdicarbollide ligand geometrically analogous to BINAP.

    PubMed

    Rojo, Isabel; Teixidor, Francesc; Viñas, Clara; Kivekäs, Raikko; Sillanpää, Reijo

    2004-10-25

    The anionic chelating ligand [1,1'-(PPh2)2-3,3'-Co(1,2-C2B9H10)2]- has been synthesized from [3,3'-Co(1,2-C2B9H11)2]- in very good yield in a one-pot process with an easy work-up procedure. The coordinating ability of this ligand has been studied with Group 11 metal ions (Ag, Au) and with transition-metal ions (Pd, Rh). The two dicarbollide halves of the [1,1'-(PPh2)2-3,3'-Co(1,2-C2B9H10)2]- ligand can swing about one axis in a manner analogous to the constituent parts of BINAP and ferrocenyl phosphine derivatives. All these ligands function as hinges, with the most important property in relation to the coordination requirements of the metal being the PP distance. [1,1'-(PPh2)2-3,3'-Co(1,2-C2B9H10)2]-, BINAP, ferrocenyl phosphine derivatives, and other hinge ligands present a range of different PP separations, and consequently different coordination spheres and dispositions around metal cations. To account for these differences, the equation Dphi2 = D02 + 4 R2cos2(90-phi/2) has been developed. It relates the PP distance (Dphi) in a complex with the minimum PP distance (D0) that is characteristic of the hinge-type ligand.

  12. River meanders - Theory of minimum variance

    USGS Publications Warehouse

    Langbein, Walter Basil; Leopold, Luna Bergere

    1966-01-01

    Meanders are the result of erosion-deposition processes tending toward the most stable form in which the variability of certain essential properties is minimized. This minimization involves the adjustment of the planimetric geometry and the hydraulic factors of depth, velocity, and local slope.The planimetric geometry of a meander is that of a random walk whose most frequent form minimizes the sum of the squares of the changes in direction in each successive unit length. The direction angles are then sine functions of channel distance. This yields a meander shape typically present in meandering rivers and has the characteristic that the ratio of meander length to average radius of curvature in the bend is 4.7.Depth, velocity, and slope are shown by field observations to be adjusted so as to decrease the variance of shear and the friction factor in a meander curve over that in an otherwise comparable straight reach of the same riverSince theory and observation indicate meanders achieve the minimum variance postulated, it follows that for channels in which alternating pools and riffles occur, meandering is the most probable form of channel geometry and thus is more stable geometry than a straight or nonmeandering alinement.

  13. Triple-decker sandwiches and related compounds of the first-row transition metals containing cyclopentadienyl and benzene rings.

    PubMed

    Liu, Haibo; Li, Qian-shu; Xie, Yaoming; King, R Bruce; Schaefer, Henry F

    2010-08-12

    The triple-decker sandwich compound trans-Cp(2)V(2)(eta(6):eta(6)-mu-C(6)H(6)) has been synthesized, as well as "slipped" sandwich compounds of the type trans-Cp(2)Co(2)(eta(4):eta(4)-mu-arene) and the cis-Cp(2)Fe(2)(eta(4):eta(4)-mu-C(6)R(6)) derivatives with an Fe-Fe bond (Cp = eta(5)-cyclopentadienyl). Theoretical studies show that the symmetrical triple-decker sandwich structures trans-Cp(2)M(2)(eta(6):eta(6)-mu-C(6)H(6)) are the global minima for M = Ti, V, and Mn but lie approximately 10 kcal/mol above the global minimum for M = Cr. The nonbonding M...M distances and spin states in these triple decker sandwich compounds can be related to the occupancies of the frontier bonding molecular orbitals. The global minimum for the chromium derivative is a singlet spin state cis-Cp(2)Cr(2)(eta(4):eta(4)-mu-C(6)H(6)) structure with a very short CrCr distance of 2.06 A, suggesting a formal quadruple bond. A triplet state cis-Cp(2)Cr(2)(eta(4):eta(4)-mu-C(6)H(6)) structure with a predicted Cr[triple bond]Cr distance of 2.26 A lies only approximately 3 kcal/mol above this global minimum. For the later transition metals the global minima are predicted to be cis-Cp(2)M(2)(eta(6):eta(6)-mu-C(6)H(6)) structures with a metal-metal bond, rather than triple decker sandwiches. These include singlet cis-Cp(2)Fe(2)(eta(4):eta(4)-mu-C(6)H(6)) with a predicted Fe=Fe double bond distance of 2.43 A, singlet cis-Cp(2)Co(2)(eta(3):eta(3)-mu-C(6)H(6)) with a predicted Co-Co single bond distance of 2.59 A, and triplet cis-Cp(2)Ni(2)(eta(3):eta(3)-mu-C(6)H(6)) with a predicted Ni-Ni distance of 2.71 A.

  14. Hyperspectral feature mapping classification based on mathematical morphology

    NASA Astrophysics Data System (ADS)

    Liu, Chang; Li, Junwei; Wang, Guangping; Wu, Jingli

    2016-03-01

    This paper proposed a hyperspectral feature mapping classification algorithm based on mathematical morphology. Without the priori information such as spectral library etc., the spectral and spatial information can be used to realize the hyperspectral feature mapping classification. The mathematical morphological erosion and dilation operations are performed respectively to extract endmembers. The spectral feature mapping algorithm is used to carry on hyperspectral image classification. The hyperspectral image collected by AVIRIS is applied to evaluate the proposed algorithm. The proposed algorithm is compared with minimum Euclidean distance mapping algorithm, minimum Mahalanobis distance mapping algorithm, SAM algorithm and binary encoding mapping algorithm. From the results of the experiments, it is illuminated that the proposed algorithm's performance is better than that of the other algorithms under the same condition and has higher classification accuracy.

  15. SLOPE STABILITY EVALUATION AND EQUIPMENT SETBACK DISTANCES FOR BURIAL GROUND EXCAVATIONS

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    MCSHANE DS

    2010-03-25

    After 1970 Transuranic (TRU) and suspect TRU waste was buried in the ground with the intention that at some later date the waste would be retrieved and processed into a configuration for long term storage. To retrieve this waste the soil must be removed (excavated). Sloping the bank of the excavation is the method used to keep the excavation from collapsing and to provide protection for workers retrieving the waste. The purpose of this paper is to document the minimum distance (setback) that equipment must stay from the edge of the excavation to maintain a stable slope. This evaluation examinesmore » the equipment setback distance by dividing the equipment into two categories, (1) equipment used for excavation and (2) equipment used for retrieval. The section on excavation equipment will also discuss techniques used for excavation including the process of benching. Calculations 122633-C-004, 'Slope Stability Analysis' (Attachment A), and 300013-C-001, 'Crane Stability Analysis' (Attachment B), have been prepared to support this evaluation. As shown in the calculations the soil has the following properties: Unit weight 110 pounds per cubic foot; and Friction Angle (natural angle of repose) 38{sup o} or 1.28 horizontal to 1 vertical. Setback distances are measured from the top edge of the slope to the wheels/tracks of the vehicles and heavy equipment being utilized. The computer program utilized in the calculation uses the center of the wheel or track load for the analysis and this difference is accounted for in this evaluation.« less

  16. Space Availability in Confined Sheep during Pregnancy, Effects in Movement Patterns and Use of Space

    PubMed Central

    Averós, Xavier; Lorea, Areta; Beltrán de Heredia, Ignacia; Arranz, Josune; Ruiz, Roberto; Estevez, Inma

    2014-01-01

    Space availability is essential to grant the welfare of animals. To determine the effect of space availability on movement and space use in pregnant ewes (Ovis aries), 54 individuals were studied during the last 11 weeks of gestation. Three treatments were tested (1, 2, and 3 m2/ewe; 6 ewes/group). Ewes' positions were collected for 15 minutes using continuous scan samplings two days/week. Total and net distance, net/total distance ratio, maximum and minimum step length, movement activity, angular dispersion, nearest, furthest and mean neighbour distance, peripheral location ratio, and corrected peripheral location ratio were calculated. Restriction in space availability resulted in smaller total travelled distance, net to total distance ratio, maximum step length, and angular dispersion but higher movement activity at 1 m2/ewe as compared to 2 and 3 m2/ewe (P<0.01). On the other hand, nearest and furthest neighbour distances increased from 1 to 3 m2/ewe (P<0.001). Largest total distance, maximum and minimum step length, and movement activity, as well as lowest net/total distance ratio and angular dispersion were observed during the first weeks (P<0.05) while inter-individual distances increased through gestation. Results indicate that movement patterns and space use in ewes were clearly restricted by limitations of space availability to 1 m2/ewe. This reflected in shorter, more sinuous trajectories composed of shorter steps, lower inter-individual distances and higher movement activity potentially linked with higher restlessness levels. On the contrary, differences between 2 and 3 m2/ewe, for most variables indicate that increasing space availability from 2 to 3 m2/ewe would appear to have limited benefits, reflected mostly in a further increment in the inter-individual distances among group members. No major variations in spatial requirements were detected through gestation, except for slight increments in inter-individual distances and an initial adaptation period, with ewes being restless and highly motivated to explore their new environment. PMID:24733027

  17. Nucleation theory with delayed interactions: an application to the early stages of the receptor-mediated adhesion/fusion kinetics of lipid vesicles.

    PubMed

    Raudino, Antonio; Pannuzzo, Martina

    2010-01-28

    A semiquantitative theory aimed to describe the adhesion kinetics between soft objects, such as living cells or vesicles, has been developed. When rigid bodies are considered, the adhesion kinetics is successfully described by the classical Derjaguin, Landau, Verwey, and Overbeek (DLVO) picture, where the energy profile of two approaching bodies is given by a two asymmetrical potential wells separated by a barrier. The transition probability from the long-distance to the short-distance minimum defines the adhesion rate. Conversely, soft bodies might follow a different pathway to reach the short-distance minimum: thermally excited fluctuations give rise to local protrusions connecting the approaching bodies. These transient adhesion sites are stabilized by short-range adhesion forces (e.g., ligand-receptor interactions between membranes brought at contact distance), while they are destabilized both by repulsive forces and by the elastic deformation energy. Above a critical area of the contact site, the adhesion forces prevail: the contact site grows in size until the complete adhesion of the two bodies inside a short-distance minimum is attained. This nucleation mechanism has been developed in the framework of a nonequilibrium Fokker-Planck picture by considering both the adhesive patch growth and dissolution processes. In addition, we also investigated the effect of the ligand-receptor pairing kinetics at the adhesion site in the time course of the patch expansion. The ratio between the ligand-receptor pairing kinetics and the expansion rate of the adhesion site is of paramount relevance in determining the overall nucleation rate. The theory enables one to self-consistently include both thermodynamics (energy barrier height) and dynamic (viscosity) parameters, giving rise in some limiting cases to simple analytical formulas. The model could be employed to rationalize fusion kinetics between vesicles, provided the short-range adhesion transition is the rate-limiting step to the whole adhesion process. Approximate relationships between the experimental fusion rates reported in the literature and parameters such as membrane elastic bending modulus, repulsion strength, temperature, osmotic forces, ligand-receptor binding energy, solvent and membrane viscosities are satisfactory explained by our model. The present results hint a possible role of the initial long-distance-->short-distance transition in determining the whole fusion kinetics.

  18. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Zhang, J; Li, X; Ding, X

    Purpose: We investigate the spot characteristic and dose profiles properties from a compact gantry proton therapy system. This compact design features a dedicated pencil beam scanning nozzle with the scanning magnet located upstream of the final 60 degree bending magnet. Due to the unique beam line design, uncertainty has been raised in the virtual source-to-axis distance (SAD). We investigate its potential clinical impact through measurements and simulation. Methods: A scintillator camera based detector was used to measure spot characteristics and position accuracy. An ion chamber array device was used to measure planar dose profile. Dose profile in-air simulation was performedmore » using in-house built MATLAB program based on additional spot parameters directly from measurements. Spot characteristics such as position and in-air sigma values were used to general simulated 2D elliptical Gaussian spots. The virtual SAD distance changes in the longitudinal direction were also simulated. Planar dose profiles were generated by summation of simulated spots at the isocenter, 15 cm above the isocenter, and 15 cm below the isocenter for evaluation of potential clinical dosimetric impact. Results: We found that the virtual SAD varies depending on the spot location on the longitudinal axis. Measurements have shown that the variable SAD changes from 7 to 12 meters from one end to the other end of the treatment field in the longitudinal direction. The simulation shows that the planer dose profiles differences between the fixed SAD and variable SAD are within 3% from the isocenter profile and the lateral penumbras are within 1 mm difference. Conclusion: Our measurements and simulations show that there are minimum effects on the spot characteristics and dose profiles for this up-stream scanning compact system proton system. Further treatment planning study is needed with the variable virtual SAD accounted for in the planning system to show minimum dosimetric impact.« less

  19. Two field trials for deblending of simultaneous source surveys: Why we failed and why we succeeded?

    NASA Astrophysics Data System (ADS)

    Zu, Shaohuan; Zhou, Hui; Chen, Haolin; Zheng, Hao; Chen, Yangkang

    2017-08-01

    Currently, deblending is the main strategy for dealing with the intense interference problem of simultaneous source data. Most deblending methods are based on the property that useful signal is coherent while the interference is incoherent in some domains other than common shot domain. In this paper, two simultaneous source field trials were studied in detail. In the first trial, the simultaneous source survey was not optimal, as the dithering code had strong coherency and the minimum distance between the two vessels was also small. The chosen marine shot scheduling and vessel deployment made it difficult to deblend the simultaneous source data, and result was an unexpected failure. Next, we tested different parameters (the dithering code and the minimum distance between vessels) of the simultaneous source survey using the simulated blended data and got some useful insights. Then, we carried out the second field trial with a carefully designed survey that was much different from the first trial. The deblended results in common receiver gather, common shot gather or the final stacked profile were encouraging. We obtained a complete success in the second field trial, which gave us confidence in the further test (such as a full three dimensional acquisition test or a high-resolution acquisition test with denser spatial sampling). Remembering that failures with simultaneous sourcing seldom reported, in this paper, our contribution is the discussion in detail about both our failed and successful field experiments and the lessons we have learned from them with the hope that the experience gained from this study can be very useful to other researchers in the same field.

  20. [Acoustic conditions in open plan offices - Pilot test results].

    PubMed

    Mikulski, Witold

    The main source of noise in open plan office are conversations. Office work standards in such premises are attained by applying specific acoustic adaptation. This article presents the results of pilot tests and acoustic evaluation of open space rooms. Acoustic properties of 6 open plan office rooms were the subject of the tests. Evaluation parameters, measurement methods and criterial values were adopted according to the following standards: PN-EN ISO 3382- 3:2012, PN-EN ISO 3382-2:2010, PN-B-02151-4:2015-06 and PN-B-02151-3:2015-10. The reverberation time was 0.33- 0.55 s (maximum permissible value in offices - 0.6 s; the criterion was met), sound absorption coefficient in relation to 1 m2 of the room's plan was 0.77-1.58 m2 (minimum permissible value - 1.1 m2; 2 out of 6 rooms met the criterion), distraction distance was 8.5-14 m (maximum permissible value - 5 m; none of the rooms met the criterion), A-weighted sound pressure level of speech at a distance of 4 m was 43.8-54.7 dB (maximum permissible value - 48 dB; 2 out of 6 rooms met the criterion), spatial decay rate of the speech was 1.8-6.3 dB (minimum permissible value - 7 dB; none of the rooms met the criterion). Standard acoustic treatment, containing sound absorbing suspended ceiling, sound absorbing materials on the walls, carpet flooring and sound absorbing workplace barriers, is not sufficient. These rooms require specific advanced acoustic solutions. Med Pr 2016;67(5):653-662. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

  1. 49 CFR 387.9 - Financial responsibility, minimum levels.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Financial responsibility, minimum levels. 387.9... MINIMUM LEVELS OF FINANCIAL RESPONSIBILITY FOR MOTOR CARRIERS Motor Carriers of Property § 387.9 Financial responsibility, minimum levels. The minimum levels of financial responsibility referred to in § 387.7 of this...

  2. 41 CFR 50-202.2 - Minimum wage in all industries.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Minimum wage in all... Public Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 202-MINIMUM WAGE DETERMINATIONS Groups of Industries § 50-202.2 Minimum wage in all industries. In all industries, the minimum wage applicable to...

  3. High Tensile Strength Amalgams for In-Space Fabrication and Repair

    NASA Technical Reports Server (NTRS)

    Grugel, Richard N.

    2006-01-01

    Amalgams are well known for their use in dental practice as a tooth filling material. They have a number of useful attributes that include room temperature fabrication, corrosion resistance, dimensional stability, and very good compressive strength. These properties well serve dental needs but, unfortunately, amalgams have extremely poor tensile strength, a feature that severely limits other potential applications. Improved material properties (strength and temperature) of amalgams may have application to the freeform fabrication of repairs or parts that might be necessary during an extended space mission. Advantages would include, but are not limited to: the ability to produce complex parts, a minimum number of processing steps, minimum crew interaction, high yield - minimum wasted material, reduced gravity compatibility, minimum final finishing, safety, and minimum power consumption. The work presented here shows how the properties of amalgams can be improved by changing particle geometries in conjunction with novel engineering metals.

  4. 30 CFR 204.214 - Is minimum royalty due on a property for which I took relief?

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false Is minimum royalty due on a property for which I took relief? 204.214 Section 204.214 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE INTERIOR MINERALS REVENUE MANAGEMENT ALTERNATIVES FOR MARGINAL PROPERTIES Accounting and Auditing...

  5. DOE Office of Scientific and Technical Information (OSTI.GOV)

    Martínez-Ruiz, F. J.; Blas, F. J., E-mail: felipe@uhu.es; Moreno-Ventas Bravo, A. I.

    We determine the interfacial properties of a symmetrical binary mixture of equal-sized spherical Lennard-Jones molecules, σ{sub 11} = σ{sub 22}, with the same dispersive energy between like species, ϵ{sub 11} = ϵ{sub 22}, but different dispersive energies between unlike species low enough to induce phase separation. We use the extensions of the improved version of the inhomogeneous long-range corrections of Janecek [J. Phys. Chem. B 110, 6264 (2006)], presented recently by MacDowell and Blas [J. Chem. Phys. 131, 074705 (2009)] and Martínez-Ruiz et al. [J. Chem. Phys. 141, 184701 (2014)], to deal with the interaction energy and microscopic components ofmore » the pressure tensor. We perform Monte Carlo simulations in the canonical ensemble to obtain the interfacial properties of the symmetrical mixture with different cut-off distances r{sub c} and in combination with the inhomogeneous long-range corrections. The pressure tensor is obtained using the mechanical (virial) and thermodynamic route. The liquid-liquid interfacial tension is also evaluated using three different procedures, the Irving-Kirkwood method, the difference between the macroscopic components of the pressure tensor, and the test-area methodology. This allows to check the validity of the recent extensions presented to deal with the contributions due to long-range corrections for intermolecular energy and pressure tensor in the case of binary mixtures that exhibit liquid-liquid immiscibility. In addition to the pressure tensor and the surface tension, we also obtain density profiles and coexistence densities and compositions as functions of pressure, at a given temperature. According to our results, the main effect of increasing the cut-off distance r{sub c} is to sharpen the liquid-liquid interface and to increase the width of the biphasic coexistence region. Particularly interesting is the presence of a relative minimum in the total density profiles of the symmetrical mixture. This minimum is related with a desorption of the molecules at the interface, a direct consequence of a combination of the weak dispersive interactions between unlike species of the symmetrical binary mixture, and the presence of an interfacial region separating the two immiscible liquid phases in coexistence.« less

  6. Theoretical investigation of structural and optical properties of semi-fluorinated bilayer graphene

    NASA Astrophysics Data System (ADS)

    Xiao-Jiao, San; Bai, Han; Jing-Geng, Zhao

    2016-03-01

    We have studied the structural and optical properties of semi-fluorinated bilayer graphene using density functional theory. When the interlayer distance is 1.62 Å, the two graphene layers in AA stacking can form strong chemical bonds. Under an in-plane stress of 6.8 GPa, this semi-fluorinated bilayer graphene becomes the energy minimum. Our calculations indicate that the semi-fluorinated bilayer graphene with the AA stacking sequence and rectangular fluorinated configuration is a nonmagnetic semiconductor (direct gap of 3.46 eV). The electronic behavior at the vicinity of the Fermi level is mainly contributed by the p electrons of carbon atoms forming C=C double bonds. We compare the optical properties of the semi-fluorinated bilayer graphene with those of bilayer graphene stacked in the AA sequence and find that the semi-fluorinated bilayer graphene is anisotropic for the polarization vector on the basal plane of graphene and a red shift occurs in the [010] polarization, which makes the peak at the low-frequency region located within visible light. This investigation is useful to design polarization-dependence optoelectronic devices. Project supported by the Program of Educational Commission of Heilongjiang Province, China (Grant No. 12541131).

  7. 24 CFR 200.925a - Multifamily and care-type minimum property standards.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... COMMISSIONER, DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT GENERAL INTRODUCTION TO FHA PROGRAMS Minimum Property..., electrical, and elevators. (3) For purposes of this paragraph, a state or local code regulates an area if it...

  8. Recognition of In-Vehicle Group Activities (iVGA): Phase-I, Feasibility Study

    DTIC Science & Technology

    2014-08-27

    the driver is either adjusting his/her eyeglasses , adjusting his/her makeup, or possibly attempt to hiding his/her face from getting recognized. In...closest of two patterns measured based on hamming distance determine the best class representing a test pattern. Figure 61 presents the Hamming neural...symbols are different. In another way, it measures the minimum number of substitutions required to change one string into the other, or the minimum

  9. The finite body triangulation: algorithms, subgraphs, homogeneity estimation and application.

    PubMed

    Carson, Cantwell G; Levine, Jonathan S

    2016-09-01

    The concept of a finite body Dirichlet tessellation has been extended to that of a finite body Delaunay 'triangulation' to provide a more meaningful description of the spatial distribution of nonspherical secondary phase bodies in 2- and 3-dimensional images. A finite body triangulation (FBT) consists of a network of minimum edge-to-edge distances between adjacent objects in a microstructure. From this is also obtained the characteristic object chords formed by the intersection of the object boundary with the finite body tessellation. These two sets of distances form the basis of a parsimonious homogeneity estimation. The characteristics of the spatial distribution are then evaluated with respect to the distances between objects and the distances within them. Quantitative analysis shows that more physically representative distributions can be obtained by selecting subgraphs, such as the relative neighbourhood graph and the minimum spanning tree, from the finite body tessellation. To demonstrate their potential, we apply these methods to 3-dimensional X-ray computed tomographic images of foamed cement and their 2-dimensional cross sections. The Python computer code used to estimate the FBT is made available. Other applications for the algorithm - such as porous media transport and crack-tip propagation - are also discussed. © 2016 The Authors Journal of Microscopy © 2016 Royal Microscopical Society.

  10. Protein-protein interaction site predictions with minimum covariance determinant and Mahalanobis distance.

    PubMed

    Qiu, Zhijun; Zhou, Bo; Yuan, Jiangfeng

    2017-11-21

    Protein-protein interaction site (PPIS) prediction must deal with the diversity of interaction sites that limits their prediction accuracy. Use of proteins with unknown or unidentified interactions can also lead to missing interfaces. Such data errors are often brought into the training dataset. In response to these two problems, we used the minimum covariance determinant (MCD) method to refine the training data to build a predictor with better performance, utilizing its ability of removing outliers. In order to predict test data in practice, a method based on Mahalanobis distance was devised to select proper test data as input for the predictor. With leave-one-validation and independent test, after the Mahalanobis distance screening, our method achieved higher performance according to Matthews correlation coefficient (MCC), although only a part of test data could be predicted. These results indicate that data refinement is an efficient approach to improve protein-protein interaction site prediction. By further optimizing our method, it is hopeful to develop predictors of better performance and wide range of application. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Gender classification in children based on speech characteristics: using fundamental and formant frequencies of Malay vowels.

    PubMed

    Zourmand, Alireza; Ting, Hua-Nong; Mirhassani, Seyed Mostafa

    2013-03-01

    Speech is one of the prevalent communication mediums for humans. Identifying the gender of a child speaker based on his/her speech is crucial in telecommunication and speech therapy. This article investigates the use of fundamental and formant frequencies from sustained vowel phonation to distinguish the gender of Malay children aged between 7 and 12 years. The Euclidean minimum distance and multilayer perceptron were used to classify the gender of 360 Malay children based on different combinations of fundamental and formant frequencies (F0, F1, F2, and F3). The Euclidean minimum distance with normalized frequency data achieved a classification accuracy of 79.44%, which was higher than that of the nonnormalized frequency data. Age-dependent modeling was used to improve the accuracy of gender classification. The Euclidean distance method obtained 84.17% based on the optimal classification accuracy for all age groups. The accuracy was further increased to 99.81% using multilayer perceptron based on mel-frequency cepstral coefficients. Copyright © 2013 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

  12. Analysis of spatial correlations in a model two-dimensional liquid through eigenvalues and eigenvectors of atomic-level stress matrices.

    PubMed

    Levashov, V A; Stepanov, M G

    2016-01-01

    Considerations of local atomic-level stresses associated with each atom represent a particular approach to address structures of disordered materials at the atomic level. We studied structural correlations in a two-dimensional model liquid using molecular dynamics simulations in the following way. We diagonalized the atomic-level stress tensor of every atom and investigated correlations between the eigenvalues and orientations of the eigenvectors of different atoms as a function of distance between them. It is demonstrated that the suggested approach can be used to characterize structural correlations in disordered materials. In particular, we found that changes in the stress correlation functions on decrease of temperature are the most pronounced for the pairs of atoms with separation distance that corresponds to the first minimum in the pair density function. We also show that the angular dependencies of the stress correlation functions previously reported by Wu et al. [Phys. Rev. E 91, 032301 (2015)10.1103/PhysRevE.91.032301] do not represent the anisotropic Eshelby's stress fields, as it is suggested, but originate in the rotational properties of the stress tensors.

  13. Maximum life spiral bevel reduction design

    NASA Technical Reports Server (NTRS)

    Savage, M.; Prasanna, M. G.; Coe, H. H.

    1992-01-01

    Optimization is applied to the design of a spiral bevel gear reduction for maximum life at a given size. A modified feasible directions search algorithm permits a wide variety of inequality constraints and exact design requirements to be met with low sensitivity to initial values. Gear tooth bending strength and minimum contact ratio under load are included in the active constraints. The optimal design of the spiral bevel gear reduction includes the selection of bearing and shaft proportions in addition to gear mesh parameters. System life is maximized subject to a fixed back-cone distance of the spiral bevel gear set for a specified speed ratio, shaft angle, input torque, and power. Significant parameters in the design are: the spiral angle, the pressure angle, the numbers of teeth on the pinion and gear, and the location and size of the four support bearings. Interpolated polynomials expand the discrete bearing properties and proportions into continuous variables for gradient optimization. After finding the continuous optimum, a designer can analyze near optimal designs for comparison and selection. Design examples show the influence of the bearing lives on the gear parameters in the optimal configurations. For a fixed back-cone distance, optimal designs with larger shaft angles have larger service lives.

  14. A new approach for minimum phase output definition

    NASA Astrophysics Data System (ADS)

    Jahangiri, Fatemeh; Talebi, Heidar Ali; Menhaj, Mohammad Bagher; Ebenbauer, Christian

    2017-01-01

    This paper presents a novel method for output redefinition for linear systems. The approach also determines possible relative degrees for the systems corresponding to any new output vector. To guarantee the minimum phase property with a prescribed relative degree, a set of new conditions is introduced. A key feature of these conditions is that there is no need to any form of transformations which make the scheme suitable for optimisation problems in control to ensure the minimum phase property. Moreover, the results are useful for sensor placement problems and for obtaining minimum phase approximations of non-minimum phase systems. Numerical examples including an example of unmanned aerial vehicle systems are given to demonstrate the effectiveness of the methodology.

  15. 49 CFR 192.735 - Compressor stations: Storage of combustible materials.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Maintenance... buildings, must be stored a safe distance from the compressor building. (b) Aboveground oil or gasoline...

  16. 27 CFR 555.206 - Location of magazines.

    Code of Federal Regulations, 2013 CFR

    2013-04-01

    ... in the table of distances for storage of explosive materials in § 555.218. (2) Ammonium nitrate and... for the separation of ammonium nitrate and blasting agents in § 555.220. However, the minimum...

  17. 27 CFR 555.206 - Location of magazines.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... in the table of distances for storage of explosive materials in § 555.218. (2) Ammonium nitrate and... for the separation of ammonium nitrate and blasting agents in § 555.220. However, the minimum...

  18. 27 CFR 555.206 - Location of magazines.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... in the table of distances for storage of explosive materials in § 555.218. (2) Ammonium nitrate and... for the separation of ammonium nitrate and blasting agents in § 555.220. However, the minimum...

  19. 27 CFR 555.206 - Location of magazines.

    Code of Federal Regulations, 2012 CFR

    2012-04-01

    ... in the table of distances for storage of explosive materials in § 555.218. (2) Ammonium nitrate and... for the separation of ammonium nitrate and blasting agents in § 555.220. However, the minimum...

  20. Dual tasking negatively impacts obstacle avoidance abilities in post-stroke individuals with visuospatial neglect: Task complexity matters!

    PubMed

    Aravind, Gayatri; Lamontagne, Anouk

    2017-01-01

    Persons with perceptual-attentional deficits due to visuospatial neglect (VSN) after a stroke are at a risk of collisions while walking in the presence of moving obstacles. The attentional burden of performing a dual-task may further compromise their obstacle avoidance performance, putting them at a greater risk of collisions. The objective of this study was to compare the ability of persons with (VSN+) and without VSN (VSN-) to dual task while negotiating moving obstacles. Twenty-six stroke survivors (13 VSN+, 13 VSN-) were assessed on their ability to (a) negotiate moving obstacles while walking (locomotor single task); (b) perform a pitch-discrimination task (cognitive single task) and (c) simultaneously perform the walking and cognitive tasks (dual task). We compared the groups on locomotor (collision rates, minimum distance from obstacle and onset of strategies) and cognitive (error rates) outcomes. For both single and dual task walking, VSN+ individuals showed higher collision rates compared to VSN- individuals. Dual tasking caused deterioration of locomotor (more collisions, delayed onset and smaller minimum distances) and cognitive performances (higher error rate) in VSN+ individuals. Contrastingly, VSN- individuals maintained collision rates, increased minimum distance, but showed more cognitive errors, prioritizing their locomotor performance. Individuals with VSN demonstrate cognitive-locomotor interference under dual task conditions, which could severely compromise safety when ambulating in community environments and may explain the poor recovery of independent community ambulation in these individuals.

  1. Orthogonal Array Testing for Transmit Precoding based Codebooks in Space Shift Keying Systems

    NASA Astrophysics Data System (ADS)

    Al-Ansi, Mohammed; Alwee Aljunid, Syed; Sourour, Essam; Mat Safar, Anuar; Rashidi, C. B. M.

    2018-03-01

    In Space Shift Keying (SSK) systems, transmit precoding based codebook approaches have been proposed to improve the performance in limited feedback channels. The receiver performs an exhaustive search in a predefined Full-Combination (FC) codebook to select the optimal codeword that maximizes the Minimum Euclidean Distance (MED) between the received constellations. This research aims to reduce the codebook size with the purpose of minimizing the selection time and the number of feedback bits. Therefore, we propose to construct the codebooks based on Orthogonal Array Testing (OAT) methods due to their powerful inherent properties. These methods allow to acquire a short codebook where the codewords are sufficient to cover almost all the possible effects included in the FC codebook. Numerical results show the effectiveness of the proposed OAT codebooks in terms of the system performance and complexity.

  2. Contributions of long-distance dispersal to population growth in colonising Pinus ponderosa populations.

    PubMed

    Lesser, Mark R; Jackson, Stephen T

    2013-03-01

    Long-distance dispersal is an integral part of plant species migration and population development. We aged and genotyped 1125 individuals in four disjunct populations of Pinus ponderosa that were initially established by long-distance dispersal in the 16th and 17th centuries. Parentage analysis was used to determine if individuals were the product of local reproductive events (two parents present), long-distance pollen dispersal (one parent present) or long-distance seed dispersal (no parents present). All individuals established in the first century at each site were the result of long-distance dispersal. Individuals reproduced at younger ages with increasing age of the overall population. These results suggest Allee effects, where populations were initially unable to expand on their own, and were dependent on long-distance dispersal to overcome a minimum-size threshold. Our results demonstrate that long-distance dispersal was not only necessary for initial colonisation but also to sustain subsequent population growth during early phases of expansion. © 2012 Blackwell Publishing Ltd/CNRS.

  3. New method for estimating low-earth-orbit collision probabilities

    NASA Technical Reports Server (NTRS)

    Vedder, John D.; Tabor, Jill L.

    1991-01-01

    An unconventional but general method is described for estimating the probability of collision between an earth-orbiting spacecraft and orbital debris. This method uses a Monte Caralo simulation of the orbital motion of the target spacecraft and each discrete debris object to generate an empirical set of distances, each distance representing the separation between the spacecraft and the nearest debris object at random times. Using concepts from the asymptotic theory of extreme order statistics, an analytical density function is fitted to this set of minimum distances. From this function, it is possible to generate realistic collision estimates for the spacecraft.

  4. Application of up-sampling and resolution scaling to Fresnel reconstruction of digital holograms.

    PubMed

    Williams, Logan A; Nehmetallah, Georges; Aylo, Rola; Banerjee, Partha P

    2015-02-20

    Fresnel transform implementation methods using numerical preprocessing techniques are investigated in this paper. First, it is shown that up-sampling dramatically reduces the minimum reconstruction distance requirements and allows maximal signal recovery by eliminating aliasing artifacts which typically occur at distances much less than the Rayleigh range of the object. Second, zero-padding is employed to arbitrarily scale numerical resolution for the purpose of resolution matching multiple holograms, where each hologram is recorded using dissimilar geometric or illumination parameters. Such preprocessing yields numerical resolution scaling at any distance. Both techniques are extensively illustrated using experimental results.

  5. The Variance of Solar Wind Magnetic Fluctuations: Solutions and Further Puzzles

    NASA Technical Reports Server (NTRS)

    Roberts, D. A.; Goldstein, M. L.

    2006-01-01

    We study the dependence of the variance directions of the magnetic field in the solar wind as a function of scale, radial distance, and Alfvenicity. The study resolves the question of why different studies have arrived at widely differing values for the maximum to minimum power (approximately equal to 3:1 up to approximately equal to 20:1). This is due to the decreasing anisotropy with increasing time interval chosen for the variance, and is a direct result of the "spherical polarization" of the waves which follows from the near constancy of |B|. The reason for the magnitude preserving evolution is still unresolved. Moreover, while the long-known tendency for the minimum variance to lie along the mean field also follows from this view (as shown by Barnes many years ago), there is no theory for why the minimum variance follows the field direction as the Parker angle changes. We show that this turning is quite generally true in Alfvenic regions over a wide range of heliocentric distances. The fact that nonAlfvenic regions, while still showing strong power anisotropies, tend to have a much broader range of angles between the minimum variance and the mean field makes it unlikely that the cause of the variance turning is to be found in a turbulence mechanism. There are no obvious alternative mechanisms, leaving us with another intriguing puzzle.

  6. Do school classrooms meet the visual requirements of children and recommended vision standards?

    PubMed

    Negiloni, Kalpa; Ramani, Krishna Kumar; Sudhir, Rachapalle Reddi

    2017-01-01

    Visual demands of school children tend to vary with diverse classroom environments. The study aimed to evaluate the distance and near Visual Acuity (VA) demand in Indian school classrooms and their comparison with the recommended vision standards. The distance and near VA demands were assessed in 33 classrooms (grades 4 to 12) of eight schools. The VA threshold demand relied on the smallest size of distance and near visual task material and viewing distance. The logMAR equivalents of minimum VA demand at specific seating positions (desk) and among different grades were evaluated. The near threshold was converted into actual near VA demand by including the acuity reserve. The existing dimensions of chalkboard and classroom, gross area in a classroom per student and class size in all the measured classrooms were compared to the government recommended standards. In 33 classrooms assessed (35±10 students per room), the average distance and near logMAR VA threshold demand was 0.31±0.17 and 0.44±0.14 respectively. The mean distance VA demand (minimum) in front desk position was 0.56±0.18 logMAR. Increased distance threshold demand (logMAR range -0.06, 0.19) was noted in 7 classrooms (21%). The mean VA demand in grades 4 to 8 and grades 9 to 12 was 0.35±0.16 and 0.24±0.16 logMAR respectively and the difference was not statistically significant (p = 0.055). The distance from board to front desk was greater than the recommended standard of 2.2m in 27 classrooms (82%). The other measured parameters were noted to be different from the proposed standards in majority of the classrooms. The study suggests the inclusion of task demand assessment in school vision screening protocol to provide relevant guidance to school authorities. These findings can serve as evidence to accommodate children with mild to moderate visual impairment in the regular classrooms.

  7. Optimizing the Launch of a Projectile to Hit a Target

    NASA Astrophysics Data System (ADS)

    Mungan, Carl E.

    2017-12-01

    Some teenagers are exploring the outer perimeter of a castle. They notice a spy hole in its wall, across the moat a horizontal distance x and vertically up the wall a distance y. They decide to throw pebbles at the hole. One girl wants to use physics to throw with the minimum speed necessary to hit the hole. What is the required launch speed v and launch angle θ above the horizontal?

  8. Properties of model atomic free-standing thin films.

    PubMed

    Shi, Zane; Debenedetti, Pablo G; Stillinger, Frank H

    2011-03-21

    We present a computational study of the thermodynamic, dynamic, and structural properties of free-standing thin films, investigated via molecular dynamics simulation of a glass-forming binary Lennard-Jones mixture. An energy landscape analysis is also performed to study glassy states. At equilibrium, species segregation occurs, with the smaller minority component preferentially excluded from the surface. The film's interior density and interface width depend solely on temperature and not the initialization density. The atoms at the surface of the film have a higher lateral diffusivity when compared to the interior. The average difference between the equilibrium and inherent structure energies assigned to individual particles, as a function of the distance from the center of the film, increases near the surface. A minimum of this difference occurs in the region just under the liquid-vapor interface. This suggests that the surface atoms are able to sample the underlying energy landscape more effectively than those in the interior, and we suggest a possible relationship of this observation to the recently reported formation of stable glasses by vapor phase deposition.

  9. Explosive Welding of Aluminum, Titanium and Zirconium to Copper Sheet Metal

    NASA Technical Reports Server (NTRS)

    Hegazy, A. A.; Mote, J. D.

    1985-01-01

    The main material properties affecting the explosive weldability of a certain metal combination are the yield strength, the ductility, the density and the sonic velocity of the two metals. Successful welding of the metal combination depends mainly on the correct choice of the explosive welding parameters; i.e., the stand off distance, the weight of the explosive charge relative to the weight of the flyer plate and the detonation velocity of the explosive. Based on the measured and the handbook values of the properties of interest, the explosive welding parameters were calculated and the arrangements for the explosive welding of the Al alloy 6061-T6, titanium and zirconium to OFHC copper were determined. The relatively small sheet metal thickness (1/8") and the fact that the thickness of the explosive layer must exceed a certain minimum value were considered during the determination of the explosive welding conditions. The results of the metallographic investigations and the measurements of the shear strength at the interface demonstrate the usefulness of these calculations to minimize the number of experimental trials.

  10. 41 CFR 50-201.1101 - Minimum wages.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true Minimum wages. 50-201... Contracts PUBLIC CONTRACTS, DEPARTMENT OF LABOR 201-GENERAL REGULATIONS § 50-201.1101 Minimum wages. Determinations of prevailing minimum wages or changes therein will be published in the Federal Register by the...

  11. 26 CFR 1.704-2 - Allocations attributable to nonrecourse liabilities.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... minimum gain. (iii) Carryover to succeeding taxable year. (k) Tiered partnerships. (1) Increase in upper... deductions. (2) Definition of and allocations pursuant to a minimum gain chargeback. (3) Definition of...) Partnership minimum gain. (1) Amount of partnership minimum gain. (2) Property subject to more than one...

  12. 26 CFR 5c.168(f)(8)-4 - Minimum investment of lessor.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... 26 Internal Revenue 14 2010-04-01 2010-04-01 false Minimum investment of lessor. 5c.168(f)(8)-4....168(f)(8)-4 Minimum investment of lessor. (a) Minimum investment. Under section 168(f)(8)(B)(ii), an... has a minimum at risk investment which, at the time the property is placed in service under the lease...

  13. 26 CFR 5c.168(f)(8)-4 - Minimum investment of lessor.

    Code of Federal Regulations, 2011 CFR

    2011-04-01

    ... 26 Internal Revenue 14 2011-04-01 2010-04-01 true Minimum investment of lessor. 5c.168(f)(8)-4....168(f)(8)-4 Minimum investment of lessor. (a) Minimum investment. Under section 168(f)(8)(B)(ii), an... has a minimum at risk investment which, at the time the property is placed in service under the lease...

  14. The minimum test battery to screen for binocular vision anomalies: report 3 of the BAND study.

    PubMed

    Hussaindeen, Jameel Rizwana; Rakshit, Archayeeta; Singh, Neeraj Kumar; Swaminathan, Meenakshi; George, Ronnie; Kapur, Suman; Scheiman, Mitchell; Ramani, Krishna Kumar

    2018-03-01

    This study aims to report the minimum test battery needed to screen non-strabismic binocular vision anomalies (NSBVAs) in a community set-up. When large numbers are to be screened we aim to identify the most useful test battery when there is no opportunity for a more comprehensive and time-consuming clinical examination. The prevalence estimates and normative data for binocular vision parameters were estimated from the Binocular Vision Anomalies and Normative Data (BAND) study, following which cut-off estimates and receiver operating characteristic curves to identify the minimum test battery have been plotted. In the receiver operating characteristic phase of the study, children between nine and 17 years of age were screened in two schools in the rural arm using the minimum test battery, and the prevalence estimates with the minimum test battery were found. Receiver operating characteristic analyses revealed that near point of convergence with penlight and red filter (> 7.5 cm), monocular accommodative facility (< 10 cycles per minute), and the difference between near and distance phoria (> 1.25 prism dioptres) were significant factors with cut-off values for best sensitivity and specificity. This minimum test battery was applied to a cohort of 305 children. The mean (standard deviation) age of the subjects was 12.7 (two) years with 121 males and 184 females. Using the minimum battery of tests obtained through the receiver operating characteristic analyses, the prevalence of NSBVAs was found to be 26 per cent. Near point of convergence with penlight and red filter > 10 cm was found to have the highest sensitivity (80 per cent) and specificity (73 per cent) for the diagnosis of convergence insufficiency. For the diagnosis of accommodative infacility, monocular accommodative facility with a cut-off of less than seven cycles per minute was the best predictor for screening (92 per cent sensitivity and 90 per cent specificity). The minimum test battery of near point of convergence with penlight and red filter, difference between distance and near phoria, and monocular accommodative facility yield good sensitivity and specificity for diagnosis of NSBVAs in a community set-up. © 2017 Optometry Australia.

  15. Toward a multi-objective decision support framework to support regulations of unconventional oil and gas development

    NASA Astrophysics Data System (ADS)

    Alongi, M.; Howard, C.; Kasprzyk, J. R.; Ryan, J. N.

    2015-12-01

    Unconventional oil and gas development (UOGD) using hydraulic fracturing and horizontal drilling has recently fostered an unprecedented acceleration in energy development. Regulations seek to protect environmental quality of areas surrounding UOGD, while maintaining economic benefits. One such regulation is a setback distance, which dictates the minimum proximity between an oil and gas well and an object such as a residential or commercial building, property line, or water source. In general, most setback regulations have been strongly politically motivated without a clear scientific basis for understanding the relationship between the setback distance and various performance outcomes. This presentation discusses a new decision support framework for setback regulations, as part of a large NSF-funded sustainability research network (SRN) on UOGD. The goal of the decision support framework is to integrate a wide array of scientific information from the SRN into a coherent framework that can help inform policy regarding UOGD. The decision support framework employs multiobjective evolutionary algorithm (MOEA) optimization coupled with simulation models of air quality and other performance-based outcomes on UOGD. The result of the MOEA optimization runs are quantitative tradeoff curves among different objectives. For example, one such curve could demonstrate air pollution concentrations versus estimates of energy development profits, for different levels of setback distance. Our results will also inform policy-relevant discussions surrounding UOGD such as comparing single- and multi-well pads, as well as regulations on the density of well development over a spatial area.

  16. Nucleation theory with delayed interactions: An application to the early stages of the receptor-mediated adhesion/fusion kinetics of lipid vesicles

    NASA Astrophysics Data System (ADS)

    Raudino, Antonio; Pannuzzo, Martina

    2010-01-01

    A semiquantitative theory aimed to describe the adhesion kinetics between soft objects, such as living cells or vesicles, has been developed. When rigid bodies are considered, the adhesion kinetics is successfully described by the classical Derjaguin, Landau, Verwey, and Overbeek (DLVO) picture, where the energy profile of two approaching bodies is given by a two asymmetrical potential wells separated by a barrier. The transition probability from the long-distance to the short-distance minimum defines the adhesion rate. Conversely, soft bodies might follow a different pathway to reach the short-distance minimum: thermally excited fluctuations give rise to local protrusions connecting the approaching bodies. These transient adhesion sites are stabilized by short-range adhesion forces (e.g., ligand-receptor interactions between membranes brought at contact distance), while they are destabilized both by repulsive forces and by the elastic deformation energy. Above a critical area of the contact site, the adhesion forces prevail: the contact site grows in size until the complete adhesion of the two bodies inside a short-distance minimum is attained. This nucleation mechanism has been developed in the framework of a nonequilibrium Fokker-Planck picture by considering both the adhesive patch growth and dissolution processes. In addition, we also investigated the effect of the ligand-receptor pairing kinetics at the adhesion site in the time course of the patch expansion. The ratio between the ligand-receptor pairing kinetics and the expansion rate of the adhesion site is of paramount relevance in determining the overall nucleation rate. The theory enables one to self-consistently include both thermodynamics (energy barrier height) and dynamic (viscosity) parameters, giving rise in some limiting cases to simple analytical formulas. The model could be employed to rationalize fusion kinetics between vesicles, provided the short-range adhesion transition is the rate-limiting step to the whole adhesion process. Approximate relationships between the experimental fusion rates reported in the literature and parameters such as membrane elastic bending modulus, repulsion strength, temperature, osmotic forces, ligand-receptor binding energy, solvent and membrane viscosities are satisfactory explained by our model. The present results hint a possible role of the initial long-distance→short-distance transition in determining the whole fusion kinetics.

  17. 36 CFR 223.61 - Establishing minimum stumpage rates.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 2 2014-07-01 2014-07-01 false Establishing minimum stumpage rates. 223.61 Section 223.61 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

  18. 36 CFR 223.61 - Establishing minimum stumpage rates.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 2 2013-07-01 2013-07-01 false Establishing minimum stumpage rates. 223.61 Section 223.61 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

  19. 36 CFR 223.61 - Establishing minimum stumpage rates.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 2 2012-07-01 2012-07-01 false Establishing minimum stumpage rates. 223.61 Section 223.61 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

  20. 36 CFR 223.61 - Establishing minimum stumpage rates.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 2 2011-07-01 2011-07-01 false Establishing minimum stumpage rates. 223.61 Section 223.61 Parks, Forests, and Public Property FOREST SERVICE, DEPARTMENT OF AGRICULTURE SALE AND DISPOSAL OF NATIONAL FOREST SYSTEM TIMBER, SPECIAL FOREST PRODUCTS, AND FOREST BOTANICAL...

  1. U S Navy Diving Manual. Volume 2. Mixed-Gas Diving. Revision 1.

    DTIC Science & Technology

    1981-07-01

    has been soaked in a solution of portant aspects of underwater physics and physiology caustic potash. This chemical absorbed the carbon as they...between the diver’s breathing passages and the circuit must be of minimum volume minimum of caustic fumes. Water produced by the to preclude deadspace and...strongly react with water to pro- space around the absorbent bed to reduce the gas duce caustic fumes and cannot be used in UBA’s. flow distance. The

  2. Maximum and minimum return losses from a passive two-port network terminated with a mismatched load

    NASA Technical Reports Server (NTRS)

    Otoshi, T. Y.

    1993-01-01

    This article presents an analytical method for determining the exact distance a load is required to be offset from a passive two-port network to obtain maximum or minimum return losses from the terminated two-port network. Equations are derived in terms of two-port network S-parameters and load reflection coefficient. The equations are useful for predicting worst-case performances of some types of networks that are terminated with offset short-circuit loads.

  3. Geometric characterization of separability and entanglement in pure Gaussian states by single-mode unitary operations

    NASA Astrophysics Data System (ADS)

    Adesso, Gerardo; Giampaolo, Salvatore M.; Illuminati, Fabrizio

    2007-10-01

    We present a geometric approach to the characterization of separability and entanglement in pure Gaussian states of an arbitrary number of modes. The analysis is performed adapting to continuous variables a formalism based on single subsystem unitary transformations that has been recently introduced to characterize separability and entanglement in pure states of qubits and qutrits [S. M. Giampaolo and F. Illuminati, Phys. Rev. A 76, 042301 (2007)]. In analogy with the finite-dimensional case, we demonstrate that the 1×M bipartite entanglement of a multimode pure Gaussian state can be quantified by the minimum squared Euclidean distance between the state itself and the set of states obtained by transforming it via suitable local symplectic (unitary) operations. This minimum distance, corresponding to a , uniquely determined, extremal local operation, defines an entanglement monotone equivalent to the entropy of entanglement, and amenable to direct experimental measurement with linear optical schemes.

  4. Analysis of the minimum swerving distance for the development of a motorcycle autonomous braking system.

    PubMed

    Giovannini, Federico; Savino, Giovanni; Pierini, Marco; Baldanzini, Niccolò

    2013-10-01

    In the recent years the autonomous emergency brake (AEB) was introduced in the automotive field to mitigate the injury severity in case of unavoidable collisions. A crucial element for the activation of the AEB is to establish when the obstacle is no longer avoidable by lateral evasive maneuvers (swerving). In the present paper a model to compute the minimum swerving distance needed by a powered two-wheeler (PTW) to avoid the collision against a fixed obstacle, named last-second swerving model (Lsw), is proposed. The effectiveness of the model was investigated by an experimental campaign involving 12 volunteers riding a scooter equipped with a prototype autonomous emergency braking, named motorcycle autonomous emergency braking system (MAEB). The tests showed the performance of the model in evasive trajectory computation for different riding styles and fixed obstacles. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. System and method employing a minimum distance and a load feature database to identify electric load types of different electric loads

    DOEpatents

    Lu, Bin; Yang, Yi; Sharma, Santosh K; Zambare, Prachi; Madane, Mayura A

    2014-12-23

    A method identifies electric load types of a plurality of different electric loads. The method includes providing a load feature database of a plurality of different electric load types, each of the different electric load types including a first load feature vector having at least four different load features; sensing a voltage signal and a current signal for each of the different electric loads; determining a second load feature vector comprising at least four different load features from the sensed voltage signal and the sensed current signal for a corresponding one of the different electric loads; and identifying by a processor one of the different electric load types by determining a minimum distance of the second load feature vector to the first load feature vector of the different electric load types of the load feature database.

  6. Optimum nonparametric estimation of population density based on ordered distances

    USGS Publications Warehouse

    Patil, S.A.; Kovner, J.L.; Burnham, Kenneth P.

    1982-01-01

    The asymptotic mean and error mean square are determined for the nonparametric estimator of plant density by distance sampling proposed by Patil, Burnham and Kovner (1979, Biometrics 35, 597-604. On the basis of these formulae, a bias-reduced version of this estimator is given, and its specific form is determined which gives minimum mean square error under varying assumptions about the true probability density function of the sampled data. Extension is given to line-transect sampling.

  7. Variation of z-height of the molecular clouds on the Galactic Plane

    NASA Astrophysics Data System (ADS)

    Lee, Y.; Stark, A. A.

    2002-12-01

    Using the Bell Laboratories Galactic plane in the J=1-0 transition of 13CO, (l, b) = (-5o to 117o, -1o to +1o), and cloud identification code, 13CO clouds have been identified and cataloged as a function of threshold temperature. Distance estimates to the identified clouds have been made with several criteria. Minimum and maximum distances to each identified cloud are determined from a set of all the possible distances of a cloud. Several physical parameters can be determined with distances, such as z-height [D sin (b)], CO luminosity, virial mass and so forth. We select the clouds with a ratio of maximum and minimum of CO luminosities less than 3. The number of selected clouds is 281 out of 1400 identified clouds with 1 K threshold temperature. These clouds are mostly located on the tangential positions in the inner Galaxy, and some are in the Outer Galaxy. It is found that the z-height of lower luminosity clouds (less massive clouds) is systimatically larger than that of high-luminosity clouds (more massive clouds). We claim that this is the first observational evidence of the z-height variation depending on the luminosities (or masses) of molecular clouds on the Galactic plane. Our results could be a basis explaining the formation mechanism of massive clouds, such as giant molecular clouds.

  8. Minimization of municipal solid waste transportation route in West Jakarta using Tabu Search method

    NASA Astrophysics Data System (ADS)

    Chaerul, M.; Mulananda, A. M.

    2018-04-01

    Indonesia still adopts the concept of collect-haul-dispose for municipal solid waste handling and it leads to the queue of the waste trucks at final disposal site (TPA). The study aims to minimize the total distance of waste transportation system by applying a Transshipment model. In this case, analogous of transshipment point is a compaction facility (SPA). Small capacity of trucks collects the waste from waste temporary collection points (TPS) to the compaction facility which located near the waste generator. After compacted, the waste is transported using big capacity of trucks to the final disposal site which is located far away from city. Problem related with the waste transportation can be solved using Vehicle Routing Problem (VRP). In this study, the shortest distance of route from truck pool to TPS, TPS to SPA, and SPA to TPA was determined by using meta-heuristic methods, namely Tabu Search 2 Phases. TPS studied is the container type with total 43 units throughout the West Jakarta City with 38 units of Armroll truck with capacity of 10 m3 each. The result determines the assignment of each truck from the pool to the selected TPS, SPA and TPA with the total minimum distance of 2,675.3 KM. The minimum distance causing the total cost for waste transportation to be spent by the government also becomes minimal.

  9. Dynamics of ultralight aircraft: Dive recovery of hang gliders

    NASA Technical Reports Server (NTRS)

    Jones, R. T.

    1977-01-01

    Longitudinal control of a hang glider by weight shift is not always adequate for recovery from a vertical dive. According to Lanchester's phugoid theory, recovery from rest to horizontal flight ought to be possible within a distance equal to three times the height of fall needed to acquire level flight velocity. A hang glider, having a wing loading of 5 kg sq m and capable of developing a lift coefficient of 1.0, should recover to horizontal flight within a vertical distance of about 12 m. The minimum recovery distance can be closely approached if the glider is equipped with a small all-moveable tail surface having sufficient upward deflection.

  10. Pairwise Trajectory Management (PTM): Concept Overview

    NASA Technical Reports Server (NTRS)

    Jones, Kenneth M.; Graff, Thomas J.; Chartrand, Ryan C.; Carreno, Victor; Kibler, Jennifer L.

    2017-01-01

    Pairwise Trajectory Management (PTM) is an Interval Management (IM) concept that utilizes airborne and ground-based capabilities to enable the implementation of airborne pairwise spacing capabilities in oceanic regions. The goal of PTM is to use airborne surveillance and tools to manage an "at or greater than" inter-aircraft spacing. Due to the precision of Automatic Dependent Surveillance-Broadcast (ADS-B) information and the use of airborne spacing guidance, the PTM minimum spacing distance will be less than distances a controller can support with current automation systems that support oceanic operations. Ground tools assist the controller in evaluating the traffic picture and determining appropriate PTM clearances to be issued. Avionics systems provide guidance information that allows the flight crew to conform to the PTM clearance issued by the controller. The combination of a reduced minimum distance and airborne spacing management will increase the capacity and efficiency of aircraft operations at a given altitude or volume of airspace. This paper provides an overview of the proposed application, description of a few key scenarios, high level discussion of expected air and ground equipment and procedure changes, overview of a potential flight crew human-machine interface that would support PTM operations and some initial PTM benefits results.

  11. 11. VIEW OF HOCK OUTCROPPING, CONCRETE GRAVITY DAM FACE AND ...

    Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

    11. VIEW OF HOCK OUTCROPPING, CONCRETE GRAVITY DAM FACE AND LAKE WITH TUNNEL INLET STRUCTURE IN DISTANCE, SHOWN AT MINIMUM WATER FLOW, LOOKING SOUTHEAST (UPSTREAM) - Van Arsdale Dam, South Fork of Eel River, Ukiah, Mendocino County, CA

  12. Radial evolution of the solar wind from IMP 8 to Voyager 2

    NASA Technical Reports Server (NTRS)

    Richardson, John D.; Paularena, Karolen I.; Lazarus, Alan J.; Belcher, John W.

    1995-01-01

    Voyager 2 and Interplanetary Monitoring Platform (IMP) 8 data from 1977 through 1994 are presented and compared. Radial velocity and temperature structures remain intact over the distance from 1 to 43 AU, but density structures do not. Temperature and velocity changes are correlated and nearly in phase at 1 AU, but in the outer heliosphere temperature changes lead velocity changes by tens of days. Solar cycle variations are detected by both spacecraft, with minima in flux density and dynamic pressure near solar maxima. Differences between Voyager 2 and IMP 8 observations near the solar minimum in 1986-1987 are attributed to latitudinal gradients in solar wind properties. Solar rotation variations are often present even at 40 AU. The Voyager 2 temperature profile is best fit with a R(exp -0.49 +/- 0.01) decrease, much less steep than an adiabatic profile.

  13. Highly efficient heralded single-photon source for telecom wavelengths based on a PPLN waveguide.

    PubMed

    Bock, Matthias; Lenhard, Andreas; Chunnilall, Christopher; Becher, Christoph

    2016-10-17

    We present the realization of a highly efficient photon pair source based on spontaneous parametric downconversion (SPDC) in a periodically poled lithium niobate (PPLN) ridge waveguide. The source is suitable for long distance quantum communication applications as the photon pairs are located at the centers of the telecommunication O- and C- band at 1312 nm and 1557 nm. The high efficiency is confirmed by a conversion efficiency of 4 × 10-6 - which is to our knowledge among the highest conversion efficiencies reported so far - and a heralding efficiency of 64.1 ± 2.1%. The heralded single-photon properties are confirmed by the measurement of the photon statistics with a Click/No-Click method as well as the heralded g(2)-function. A minimum value for g(2)(0) of 0.001 ± 0.0003 indicating clear antibunching has been observed.

  14. Optimal braking studies

    NASA Technical Reports Server (NTRS)

    Pazdera, J. S.

    1972-01-01

    To brake in minimum distance, the tire slip must be controlled to ride the peak of the mu-slip curve so that maximum ground force is developed between tire and pavement. The resulting control system differs from antiskid systems which react to impending wheel lockup. A simplified model is presented to permit development of a sound control strategy. Liapunov techniques are used to derive a peak riding adaptive controller applicable to each wheel of a breaking vehicle. The controller is applied to a more sophisticated model of a braking airplane with strut bending dynamics included. Simulation results verify the peak riding property of the controller and the rapid adaption of the controller to extreme runway conditions. The effect of actuator dynamics, perturbation frequency, type and location of sensors, absence of a free wheel, and a method in which the pilot's braking commands can be interfaced with the peak riding system are also considered.

  15. Design for minimum energy in interstellar communication

    NASA Astrophysics Data System (ADS)

    Messerschmitt, David G.

    2015-02-01

    Microwave digital communication at interstellar distances is the foundation of extraterrestrial civilization (SETI and METI) communication of information-bearing signals. Large distances demand large transmitted power and/or large antennas, while the propagation is transparent over a wide bandwidth. Recognizing a fundamental tradeoff, reduced energy delivered to the receiver at the expense of wide bandwidth (the opposite of terrestrial objectives) is advantageous. Wide bandwidth also results in simpler design and implementation, allowing circumvention of dispersion and scattering arising in the interstellar medium and motion effects and obviating any related processing. The minimum energy delivered to the receiver per bit of information is determined by cosmic microwave background alone. By mapping a single bit onto a carrier burst, the Morse code invented for the telegraph in 1836 comes closer to this minimum energy than approaches used in modern terrestrial radio. Rather than the terrestrial approach of adding phases and amplitudes increases information capacity while minimizing bandwidth, adding multiple time-frequency locations for carrier bursts increases capacity while minimizing energy per information bit. The resulting location code is simple and yet can approach the minimum energy as bandwidth is expanded. It is consistent with easy discovery, since carrier bursts are energetic and straightforward modifications to post-detection pattern recognition can identify burst patterns. Time and frequency coherence constraints leading to simple signal discovery are addressed, and observations of the interstellar medium by transmitter and receiver constrain the burst parameters and limit the search scope.

  16. Elastohydrodynamic lubrication of elliptical contacts

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.

    1981-01-01

    The determination of the minimum film thickness within contact is considered for both fully flooded and starved conditions. A fully flooded conjunction is one in which the film thickness is not significantly changed when the amount of lubricant is increased. The fully flooded results presented show the influence of contact geometry on minimum film thickness as expressed by the ellipticity parameter and the dimensionless speed, load, and materials parameters. These results are applied to materials of high elastic modulus (hard EHL), such as metal, and to materials of low elastic modulus(soft EHL), such as rubber. In addition to the film thickness equations that are developed, contour plots of pressure and film thickness are given which show the essential features of elastohydrodynamically lubricated conjunctions. The crescent shaped region of minimum film thickness, with its side lobes in which the separation between the solids is a minimum, clearly emerges in the numerical solutions. In addition to the 3 presented for the fully flooded results, 15 more cases are used for hard EHL contacts and 18 cases are used for soft EHL contacts in a theoretical study of the influence of lubricant starvation on film thickness and pressure. From the starved results for both hard and soft EHL contacts, a simple and important dimensionless inlet boundary distance is specified. This inlet boundary distance defines whether a fully flooded or a starved condition exists in the contact. Contour plots of pressure and film thickness in and around the contact are shown for conditions.

  17. Observed source parameters for dynamic rupture with non-uniform initial stressand relatively high fracture energy

    USGS Publications Warehouse

    Beeler, Nicholas M.; Kilgore, Brian D.; McGarr, Arthur F.; Fletcher, Jon Peter B.; Evans, John R.; Steven R. Baker,

    2012-01-01

    We have conducted dynamic rupture propagation experiments to establish the relations between in-source stress drop, fracture energy and the resulting particle velocity during slip of an unconfined 2 m long laboratory fault at normal stresses between 4 and 8 MPa. To produce high fracture energy in the source we use a rough fault that has a large slip weakening distance. An artifact of the high fracture energy is that the nucleation zone is large such that precursory slip reduces fault strength over a large fraction of the total fault length prior to dynamic rupture, making the initial stress non-uniform. Shear stress, particle velocity, fault slip and acceleration were recorded coseismically at multiple locations along strike and at small fault-normal distances. Stress drop increases weakly with normal stress. Average slip rate depends linearly on the fault strength loss and on static stress drop, both with a nonzero intercept. A minimum fracture energy of 1.8 J/m2 and a linear slip weakening distance of 33 μm are inferred from the intercept. The large slip weakening distance also affects the average slip rate which is reduced by in-source energy dissipation from on-fault fracture energy.Because of the low normal stress and small per event slip (∼86 μm), no thermal weakening such as melting or pore fluid pressurization occurs in these experiments. Despite the relatively high fracture energy, and the very low heat production, energy partitioning during these laboratory earthquakes is very similar to typical earthquake source properties. The product of fracture energy and fault area is larger than the radiated energy. Seismic efficiency is low at ∼2%. The ratio of apparent stress to static stress drop is ∼27%, consistent with measured overshoot. The fracture efficiency is ∼33%. The static and dynamic stress drops when extrapolated to crustal stresses are 2–7.3 MPa and in the range of typical earthquake stress drops. As the relatively high fracture energy reduces the slip velocities in these experiments, the extrapolated average particle velocities for crustal stresses are 0.18–0.6 m/s. That these experiments are consistent with typical earthquake source properties suggests, albeit indirectly, that thermal weakening mechanisms such as thermal pressurization and melting which lead to near complete stress drops, dominate earthquake source properties only for exceptional events unless crustal stresses are low.

  18. A distance-independent calibration of the luminosity of type Ia supernovae and the Hubble constant

    NASA Technical Reports Server (NTRS)

    Leibundgut, Bruno; Pinto, Philip A.

    1992-01-01

    The absolute magnitude of SNe Ia at maximum is calibrated here using radioactive decay models for the light curve and a minimum of assumptions. The absolute magnitude parameter space is studied using explosion models and a range of rise times, and absolute B magnitudes at maximum are used to derive a range of the H0 and the distance to the Virgo Cluster from SNe Ia. Rigorous limits for H0 of 45 and 105 km/s/Mpc are derived.

  19. Natural migration rates of trees: Global terrestrial carbon cycle implications. Book chapter

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Solomon, A.M.

    The paper discusses the forest-ecological processes which constrain the rate of response by forests to rapid future environmental change. It establishes a minimum response time by natural tree populations which invade alien landscapes and reach the status of a mature, closed canopy forest when maximum carbon storage is realized. It considers rare long-distance and frequent short-distance seed transport, seedling and tree establishment, sequential tree and stand maturation, and spread between newly established colonies.

  20. Supernova bangs as a tool to study big bang

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Blinnikov, S. I., E-mail: Sergei.Blinnikov@itep.ru

    Supernovae and gamma-ray bursts are the most powerful explosions in observed Universe. This educational review tells about supernovae and their applications in cosmology. It is explained how to understand the production of light in the most luminous events with minimum required energy of explosion. These most luminous phenomena can serve as primary cosmological distance indicators. Comparing the observed distance dependence on red shift with theoretical models one can extract information on evolution of the Universe from Big Bang until our epoch.

  1. 36 CFR 13.604 - Wildlife distance conditions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Wildlife distance conditions. 13.604 Section 13.604 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... § 13.604 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards is...

  2. 36 CFR 13.1206 - Wildlife distance conditions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Wildlife distance conditions. 13.1206 Section 13.1206 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... Provisions § 13.1206 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards...

  3. 36 CFR 13.1206 - Wildlife distance conditions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Wildlife distance conditions. 13.1206 Section 13.1206 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... Provisions § 13.1206 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards...

  4. 36 CFR 13.604 - Wildlife distance conditions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Wildlife distance conditions. 13.604 Section 13.604 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... § 13.604 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards is...

  5. 36 CFR 13.604 - Wildlife distance conditions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Wildlife distance conditions. 13.604 Section 13.604 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... § 13.604 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards is...

  6. 36 CFR 13.1206 - Wildlife distance conditions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Wildlife distance conditions. 13.1206 Section 13.1206 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... Provisions § 13.1206 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards...

  7. 36 CFR 13.604 - Wildlife distance conditions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Wildlife distance conditions. 13.604 Section 13.604 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... § 13.604 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards is...

  8. 36 CFR 13.604 - Wildlife distance conditions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Wildlife distance conditions. 13.604 Section 13.604 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... § 13.604 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards is...

  9. 36 CFR 13.1206 - Wildlife distance conditions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Wildlife distance conditions. 13.1206 Section 13.1206 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... Provisions § 13.1206 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards...

  10. 36 CFR 13.1206 - Wildlife distance conditions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Wildlife distance conditions. 13.1206 Section 13.1206 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... Provisions § 13.1206 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards...

  11. Evaluating the Transport of Bacillus subtilis Spores as a Potential Surrogate for Cryptosporidium parvum Oocysts.

    PubMed

    Bradford, Scott A; Kim, Hyunjung; Headd, Brendan; Torkzaban, Saeed

    2016-02-02

    The U.S. Environmental Protection Agency has recommended the use of aerobic spores as an indicator for Cryptosporidium oocysts when determining groundwater under the direct influence of surface water. Surface properties, interaction energies, transport, retention, and release behavior of B. subtilis spores were measured over a range of physicochemical conditions, and compared with reported information for C. parvum oocysts. Interaction energy calculations predicted a much larger energy barrier and a shallower secondary minimum for spores than oocysts when the solution ionic strength (IS) equaled 0.1, 1, and 10 mM, and no energy barrier when the IS = 100 mM. Spores and oocysts exhibited similar trends of increasing retention with IS and decreasing Darcy water velocity (qw), and the predicted setback distance to achieve a six log removal was always larger for spores than oocysts. However, low levels of observed spore and oocyst release significantly influenced the predicted setback distance, especially when the fraction of reversibly retained microbes (Frev) was high. An estimate for Frev was obtained from large release pulses of spore and oocyst when the IS was reduced to deionized water. The value of Frev always increased with qw, whereas an opposition trend for Frev with IS was observed for spores (decreasing) and oocysts (increasing).

  12. Thermodynamics of an ideal generalized gas: II. Means of order alpha.

    PubMed

    Lavenda, B H

    2005-11-01

    The property that power means are monotonically increasing functions of their order is shown to be the basis of the second laws not only for processes involving heat conduction, but also for processes involving deformations. This generalizes earlier work involving only pure heat conduction and underlines the incomparability of the internal energy and adiabatic potentials when expressed as powers of the adiabatic variable. In an L-potential equilibration, the final state will be one of maximum entropy, whereas in an entropy equilibration, the final state will be one of minimum L. Unlike classical equilibrium thermodynamic phase space, which lacks an intrinsic metric structure insofar as distances and other geometrical concepts do not have an intrinsic thermodynamic significance in such spaces, a metric space can be constructed for the power means: the distance between means of different order is related to the Carnot efficiency. In the ideal classical gas limit, the average change in the entropy is shown to be proportional to the difference between the Shannon and Rényi entropies for nonextensive systems that are multifractal in nature. The L potential, like the internal energy, is a Schur convex function of the empirical temperature, which satisfies Jensen's inequality, and serves as a measure of the tendency to uniformity in processes involving pure thermal conduction.

  13. Extremal values on Zagreb indices of trees with given distance k-domination number.

    PubMed

    Pei, Lidan; Pan, Xiangfeng

    2018-01-01

    Let [Formula: see text] be a graph. A set [Formula: see text] is a distance k -dominating set of G if for every vertex [Formula: see text], [Formula: see text] for some vertex [Formula: see text], where k is a positive integer. The distance k -domination number [Formula: see text] of G is the minimum cardinality among all distance k -dominating sets of G . The first Zagreb index of G is defined as [Formula: see text] and the second Zagreb index of G is [Formula: see text]. In this paper, we obtain the upper bounds for the Zagreb indices of n -vertex trees with given distance k -domination number and characterize the extremal trees, which generalize the results of Borovićanin and Furtula (Appl. Math. Comput. 276:208-218, 2016). What is worth mentioning, for an n -vertex tree T , is that a sharp upper bound on the distance k -domination number [Formula: see text] is determined.

  14. Development of Gis Tool for the Solution of Minimum Spanning Tree Problem using Prim's Algorithm

    NASA Astrophysics Data System (ADS)

    Dutta, S.; Patra, D.; Shankar, H.; Alok Verma, P.

    2014-11-01

    minimum spanning tree (MST) of a connected, undirected and weighted network is a tree of that network consisting of all its nodes and the sum of weights of all its edges is minimum among all such possible spanning trees of the same network. In this study, we have developed a new GIS tool using most commonly known rudimentary algorithm called Prim's algorithm to construct the minimum spanning tree of a connected, undirected and weighted road network. This algorithm is based on the weight (adjacency) matrix of a weighted network and helps to solve complex network MST problem easily, efficiently and effectively. The selection of the appropriate algorithm is very essential otherwise it will be very hard to get an optimal result. In case of Road Transportation Network, it is very essential to find the optimal results by considering all the necessary points based on cost factor (time or distance). This paper is based on solving the Minimum Spanning Tree (MST) problem of a road network by finding it's minimum span by considering all the important network junction point. GIS technology is usually used to solve the network related problems like the optimal path problem, travelling salesman problem, vehicle routing problems, location-allocation problems etc. Therefore, in this study we have developed a customized GIS tool using Python script in ArcGIS software for the solution of MST problem for a Road Transportation Network of Dehradun city by considering distance and time as the impedance (cost) factors. It has a number of advantages like the users do not need a greater knowledge of the subject as the tool is user-friendly and that allows to access information varied and adapted the needs of the users. This GIS tool for MST can be applied for a nationwide plan called Prime Minister Gram Sadak Yojana in India to provide optimal all weather road connectivity to unconnected villages (points). This tool is also useful for constructing highways or railways spanning several cities optimally or connecting all cities with minimum total road length.

  15. Optimization of self-study room open problem based on green and low-carbon campus construction

    NASA Astrophysics Data System (ADS)

    Liu, Baoyou

    2017-04-01

    The optimization of self-study room open arrangement problem in colleges and universities is conducive to accelerate the fine management of the campus and promote green and low-carbon campus construction. Firstly, combined with the actual survey data, the self-study area and living area were divided into different blocks, and the electricity consumption in each self-study room and distance between different living and studying areas were normalized. Secondly, the minimum of total satisfaction index and the minimum of the total electricity consumption were selected as the optimization targets respectively. The mathematical models of linear programming were established and resolved by LINGO software. The results showed that the minimum of total satisfaction index was 4055.533 and the total minimum electricity consumption was 137216 W. Finally, some advice had been put forward on how to realize the high efficient administration of the study room.

  16. Elastohydrodynamic lubrication of point contacts. Ph.D. Thesis - Leeds Univ.

    NASA Technical Reports Server (NTRS)

    Hamrock, B. J.

    1976-01-01

    A procedure for the numerical solution of the complete, isothermal, elastohydrodynamic lubrication problem for point contacts is given. This procedure calls for the simultaneous solution of the elasticity and Reynolds equations. By using this theory the influence of the ellipticity parameter and the dimensionless speed, load, and material parameters on the minimum and central film thicknesses was investigated. Thirty-four different cases were used in obtaining the fully flooded minimum- and central-film-thickness formulas. Lubricant starvation was also studied. From the results it was possible to express the minimum film thickness for a starved condition in terms of the minimum film thickness for a fully flooded condition, the speed parameter, and the inlet distance. Fifteen additional cases plus three fully flooded cases were used in obtaining this formula. Contour plots of pressure and film thickness in and around the contact have been presented for both fully flooded and starved lubrication conditions.

  17. Kinematic Distances: A Monte Carlo Method

    NASA Astrophysics Data System (ADS)

    Wenger, Trey V.; Balser, Dana S.; Anderson, L. D.; Bania, T. M.

    2018-03-01

    Distances to high-mass star-forming regions (HMSFRs) in the Milky Way are a crucial constraint on the structure of the Galaxy. Only kinematic distances are available for a majority of the HMSFRs in the Milky Way. Here, we compare the kinematic and parallax distances of 75 Galactic HMSFRs to assess the accuracy of kinematic distances. We derive the kinematic distances using three different methods: the traditional method using the Brand & Blitz rotation curve (Method A), the traditional method using the Reid et al. rotation curve and updated solar motion parameters (Method B), and a Monte Carlo technique (Method C). Methods B and C produce kinematic distances closest to the parallax distances, with median differences of 13% (0.43 {kpc}) and 17% (0.42 {kpc}), respectively. Except in the vicinity of the tangent point, the kinematic distance uncertainties derived by Method C are smaller than those of Methods A and B. In a large region of the Galaxy, the Method C kinematic distances constrain both the distances and the Galactocentric positions of HMSFRs more accurately than parallax distances. Beyond the tangent point along ℓ = 30°, for example, the Method C kinematic distance uncertainties reach a minimum of 10% of the parallax distance uncertainty at a distance of 14 {kpc}. We develop a prescription for deriving and applying the Method C kinematic distances and distance uncertainties. The code to generate the Method C kinematic distances is publicly available and may be utilized through an online tool.

  18. About neighborhood counting measure metric and minimum risk metric.

    PubMed

    Argentini, Andrea; Blanzieri, Enrico

    2010-04-01

    In a 2006 TPAMI paper, Wang proposed the Neighborhood Counting Measure, a similarity measure for the k-NN algorithm. In his paper, Wang mentioned the Minimum Risk Metric (MRM), an early distance measure based on the minimization of the risk of misclassification. Wang did not compare NCM to MRM because of its allegedly excessive computational load. In this comment paper, we complete the comparison that was missing in Wang's paper and, from our empirical evaluation, we show that MRM outperforms NCM and that its running time is not prohibitive as Wang suggested.

  19. Keep at bay!--Abnormal personal space regulation as marker of paranoia in schizophrenia.

    PubMed

    Schoretsanitis, G; Kutynia, A; Stegmayer, K; Strik, W; Walther, S

    2016-01-01

    During threat, interpersonal distance is deliberately increased. Personal space regulation is related to amygdala function and altered in schizophrenia, but it remains unknown whether it is particularly associated with paranoid threat. We compared performance in two tests on personal space between 64 patients with schizophrenia spectrum disorders and 24 matched controls. Patients were stratified in those with paranoid threat, neutral affect or paranoid experience of power. In the stop-distance paradigm, participants indicated the minimum tolerable interpersonal distance. In the fixed-distance paradigm, they indicated the level of comfort at fixed interpersonal distances. Paranoid threat increased interpersonal distance two-fold in the stop-distance paradigm, and reduced comfort ratings in the fixed-distance paradigm. In contrast, patients experiencing paranoid power had high comfort ratings at any distance. Patients with neutral affect did not differ from controls in the stop-distance paradigm. Differences between groups remained when controlling for gender and positive symptom severity. Among schizophrenia patients, the stop-distance paradigm detected paranoid threat with 93% sensitivity and 83% specificity. Personal space regulation is not generally altered in schizophrenia. However, state paranoid experience has distinct contributions to personal space regulation. Subjects experiencing current paranoid threat share increased safety-seeking behavior. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

  20. 29 CFR 29.2 - Definitions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... the Administrator. Apprentice means a worker at least 16 years of age, except where a higher minimum age standard is otherwise fixed by law, who is employed to learn an apprenticeable occupation as... physical movement of removable/transportable electronic media and/or interactive distance learning...

  1. Tandem steerable running gear

    NASA Technical Reports Server (NTRS)

    Fincannon, O. J.; Glenn, D. L.

    1972-01-01

    Characteristics of steering assembly for vehicle designed to move large components of space flight vehicles are presented. Design makes it possible to move heavy and bulky items through narrow passageways with tight turns. Typical configuration is illustrated to show dimensions of turning radius and minimum distances involved.

  2. Simulation of Collision of Arbitrary Shape Particles with Wall in a Viscous Fluid

    NASA Astrophysics Data System (ADS)

    Mohaghegh, Fazlolah; Udaykumar, H. S.

    2016-11-01

    Collision of finite size arbitrary shape particles with wall in a viscous flow is modeled using immersed boundary method. A potential function indicating the distance from the interface is introduced for the particles and the wall. The potential can be defined by using either an analytical expression or level set method. The collision starts when the indicator potentials of the particle and wall are overlapping based on a minimum cut off. A simplified mass spring model is used in order to apply the collision forces. Instead of using a dashpot in order to damp the energy, the spring stiffness is adjusted during the bounce. The results for the case of collision of a falling sphere with the bottom wall agrees well with the experiments. Moreover, it is shown that the results are independent from the minimum collision cut off distance value. Finally, when the particle's shape is ellipsoidal, the rotation of the particle after the collision becomes important and noticeable: At low Stokes number values, the particle almost adheres to the wall in one side and rotates until it reaches the minimum gravitational potential. At high Stokes numbers, the particle bounces and loses the energy until it reaches a situation with low Stokes number.

  3. The effects of drainage basin geomorphometry on minimum low flow discharge: the study of small watershed in Kelang River Valley in Peninsular Malaysia.

    PubMed

    Yunus, Ahmad Jailani Muhamed; Nakagoshi, Nobukazu; Salleh, Khairulmaini Osman

    2003-03-01

    This study investigate the relationships between geomorphometric properties and the minimum low flow discharge of undisturbed drainage basins in the Taman Bukit Cahaya Seri Alam Forest Reserve, Peninsular Malaysia. The drainage basins selected were third-order basins so as to facilitate a common base for sampling and performing an unbiased statistical analyses. Three levels of relationships were observed in the study. Significant relationships existed between the geomorphometric properties as shown by the correlation network analysis; secondly, individual geomorphometric properties were observed to influence minimum flow discharge; and finally, the multiple regression model set up showed that minimum flow discharge (Q min) was dependent of basin area (AU), stream length (LS), maximum relief (Hmax), average relief (HAV) and stream frequency (SF). These findings further enforced other studies of this nature that drainage basins were dynamic and functional entities whose operations were governed by complex interrelationships occurring within the basins. Changes to any of the geomorphometric properties would influence their role as basin regulators thus influencing a change in basin response. In the case of the basin's minimum low flow, a change in any of the properties considered in the regression model influenced the "time to peak" of flow. A shorter time period would mean higher discharge, which is generally considered the prerequisite to flooding. This research also conclude that the role of geomorphometric properties to control the water supply within the stream through out the year even though during the drought and less precipitations months. Drainage basins are sensitive entities and any deteriorations involve will generate reciprocals and response to the water supply as well as the habitat within the areas.

  4. Edit distance for marked point processes revisited: An implementation by binary integer programming

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Hirata, Yoshito; Aihara, Kazuyuki

    2015-12-15

    We implement the edit distance for marked point processes [Suzuki et al., Int. J. Bifurcation Chaos 20, 3699–3708 (2010)] as a binary integer program. Compared with the previous implementation using minimum cost perfect matching, the proposed implementation has two advantages: first, by using the proposed implementation, we can apply a wide variety of software and hardware, even spin glasses and coherent ising machines, to calculate the edit distance for marked point processes; second, the proposed implementation runs faster than the previous implementation when the difference between the numbers of events in two time windows for a marked point process ismore » large.« less

  5. How far and how fast can mushroom spores fly? Physical limits on ballistospore size and discharge distance in the Basidiomycota

    PubMed Central

    Fischer, Mark W. F.; Stolze-Rybczynski, Jessica L.; Cui, Yunluan; Money, Nicholas P.

    2010-01-01

    Active discharge of basidiospores in most species of Basidiomycota is powered by the rapid movement of a droplet of fluid, called Buller’s drop, over the spore surface. This paper is concerned with the operation of the launch mechanism in species with the largest and smallest ballistospores. Aleurodiscus gigasporus (Russulales) produces the largest basidiospores on record. The maximum dimensions of the spores, 34 × 28 µm, correspond to a volume of 14 pL and to an estimated mass of 17 ng. The smallest recorded basidiospores are produced by Hyphodontia latitans (Hymenochaetales). Minimum spore dimensions in this species, 3.5 × 0.5 µm, correspond to a volume of 0.5 fL and mass of 0.6 pg. Neither species has been studied using high-speed video microscopy, but this technique was used to examine ballistospore discharge in species with spores of similar sizes (slightly smaller than A. gigasporus and slightly larger than those of H. latitans). Extrapolation of velocity measurements from these fungi provided estimates of discharge distances ranging from a maximum of almost 2 mm in A. gigasporus to a minimum of 4 µm in H. latitans. These are, respectively, the longest and shortest predicted discharge distances for ballistospores. Limitations to the distances traveled by basidiospores are discussed in relation to the mechanics of the discharge process and the types of fruit-bodies from which the spores are released. PMID:20835365

  6. Using traveling salesman problem algorithms for evolutionary tree construction.

    PubMed

    Korostensky, C; Gonnet, G H

    2000-07-01

    The construction of evolutionary trees is one of the major problems in computational biology, mainly due to its complexity. We present a new tree construction method that constructs a tree with minimum score for a given set of sequences, where the score is the amount of evolution measured in PAM distances. To do this, the problem of tree construction is reduced to the Traveling Salesman Problem (TSP). The input for the TSP algorithm are the pairwise distances of the sequences and the output is a circular tour through the optimal, unknown tree plus the minimum score of the tree. The circular order and the score can be used to construct the topology of the optimal tree. Our method can be used for any scoring function that correlates to the amount of changes along the branches of an evolutionary tree, for instance it could also be used for parsimony scores, but it cannot be used for least squares fit of distances. A TSP solution reduces the space of all possible trees to 2n. Using this order, we can guarantee that we reconstruct a correct evolutionary tree if the absolute value of the error for each distance measurement is smaller than f2.gif" BORDER="0">, where f3.gif" BORDER="0">is the length of the shortest edge in the tree. For data sets with large errors, a dynamic programming approach is used to reconstruct the tree. Finally simulations and experiments with real data are shown.

  7. Intellectual Property Law Confers Rights in Respect of Online Distance Education, yet Most Learning Resources Are Still Free--Truth or Fiction?

    ERIC Educational Resources Information Center

    Mann, Bruce L.

    2009-01-01

    Educational technologists might well describe online distance education as "a series of instructional events over the Internet that find their expression as learning events in a student". As a legal construct however, "online distance education" is simply "the intellectual property of its owner". This description is…

  8. Minimal Distance to Approximating Noncontextual System as a Measure of Contextuality

    NASA Astrophysics Data System (ADS)

    Kujala, Janne V.

    2017-07-01

    Let random vectors Rc={Rpc:p\\in Pc} represent joint measurements of certain subsets Pc\\subset P of properties p\\in P in different contexts c\\in C. Such a system is traditionally called noncontextual if there exists a jointly distributed set {Qp:p\\in P} of random variables such that Rc has the same distribution as {Qp:p\\in Pc} for all c\\in C. A trivial necessary condition for noncontextuality and a precondition for many measures of contextuality is that the system is consistently connected, i.e., all Rpc,Rp^{c^' }},\\dots measuring the same property p\\in P have the same distribution. The contextuality-by-default (CbD) approach allows defining more general measures of contextuality that apply to inconsistently connected systems as well, but at the price of a higher computational cost. In this paper we propose a novel measure of contextuality that shares the generality of the CbD approach and the computational benefits of the previously proposed negative probability (NP) approach. The present approach differs from CbD in that instead of considering all possible joints of the double-indexed random variables Rpc, it considers all possible approximating single-indexed systems {Qp:p\\in P}. The degree of contextuality is defined based on the minimum possible probabilistic distance of the actual measurements Rc from {Qp:p\\in Pc}. We show that this measure, called the optimal approximation (OA) measure, agrees with a certain measure of contextuality of the CbD approach for all systems where each property enters in exactly two contexts. The OA measure can be calculated far more efficiently than the CbD measure and even more efficiently than the NP measure for sufficiently large systems. We also define a variant, the OA-NP measure of contextuality that agrees with the NP measure for consistently connected (non-signaling) systems while extending it to inconsistently connected systems.

  9. 77 FR 75946 - Radio Broadcasting Services; Dove Creek, CO

    Federal Register 2010, 2011, 2012, 2013, 2014

    2012-12-26

    ...]. Radio Broadcasting Services; Dove Creek, CO AGENCY: Federal Communications Commission. ACTION: Proposed... service at Dove Creek, Colorado. Channel 229C3 can be allotted at Dove Creek, Colorado, in compliance with the Commission's minimum distance separation requirements, at the proposed reference coordinates: 37...

  10. 40 CFR 258.55 - Assessment monitoring program.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... upgradient edge of the MSWLF unit and downgradient monitoring well screen (minimum distance of travel); (5... effects during a lifetime. For purposes of this subpart, systemic toxicants include toxic chemicals that cause effects other than cancer or mutation. (ii) [Reserved] (j) In establishing ground-water protection...

  11. 40 CFR 258.55 - Assessment monitoring program.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... upgradient edge of the MSWLF unit and downgradient monitoring well screen (minimum distance of travel); (5... effects during a lifetime. For purposes of this subpart, systemic toxicants include toxic chemicals that cause effects other than cancer or mutation. (ii) [Reserved] (j) In establishing ground-water protection...

  12. 40 CFR 258.55 - Assessment monitoring program.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... upgradient edge of the MSWLF unit and downgradient monitoring well screen (minimum distance of travel); (5... effects during a lifetime. For purposes of this subpart, systemic toxicants include toxic chemicals that cause effects other than cancer or mutation. (ii) [Reserved] (j) In establishing ground-water protection...

  13. Rate-Compatible LDPC Codes with Linear Minimum Distance

    NASA Technical Reports Server (NTRS)

    Divsalar, Dariush; Jones, Christopher; Dolinar, Samuel

    2009-01-01

    A recently developed method of constructing protograph-based low-density parity-check (LDPC) codes provides for low iterative decoding thresholds and minimum distances proportional to block sizes, and can be used for various code rates. A code constructed by this method can have either fixed input block size or fixed output block size and, in either case, provides rate compatibility. The method comprises two submethods: one for fixed input block size and one for fixed output block size. The first mentioned submethod is useful for applications in which there are requirements for rate-compatible codes that have fixed input block sizes. These are codes in which only the numbers of parity bits are allowed to vary. The fixed-output-blocksize submethod is useful for applications in which framing constraints are imposed on the physical layers of affected communication systems. An example of such a system is one that conforms to one of many new wireless-communication standards that involve the use of orthogonal frequency-division modulation

  14. Study of hopping type conduction from AC conductivity in multiferroic composite

    NASA Astrophysics Data System (ADS)

    Pandey, Rabichandra; Guha, Shampa; Pradhan, Lagen Kumar; Kumar, Sunil; Supriya, Sweety; Kar, Manoranjan

    2018-05-01

    0.5BiFe0.80Ti0.20O3-0.5Co0.5Ni0.5Fe2O4(BFTO-CNFO) multiferroic composite was prepared by planetary ball mill method. X-ray diffraction analysis confirms the formation of the compound with the simultaneous presence of spinel Co0.5Ni0.5Fe2O4 (CNFO) and perovskite BiFe0.80Ti0.20O3 (BFTO) phase. Temperature dependent dielectric permittivity and loss tangent were studied with a frequency range of 100Hz to 1MHz. AC conductivity study was performed to analyze the electrical conduction behaviour in the composite. Johnscher's power law was employed to the AC conductivity data to understand the hopping of localized charge carrier in the compound. The binding energy, minimum hopping distance and density of states of the charge carriers in the composite were evaluated from the AC conductivity data. Minimum hopping distance is found to be in order of Angstrom (Å).

  15. Geometric characterization of separability and entanglement in pure Gaussian states by single-mode unitary operations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Adesso, Gerardo; CNR-INFM Coherentia, Naples; CNISM, Unita di Salerno, Salerno

    2007-10-15

    We present a geometric approach to the characterization of separability and entanglement in pure Gaussian states of an arbitrary number of modes. The analysis is performed adapting to continuous variables a formalism based on single subsystem unitary transformations that has been recently introduced to characterize separability and entanglement in pure states of qubits and qutrits [S. M. Giampaolo and F. Illuminati, Phys. Rev. A 76, 042301 (2007)]. In analogy with the finite-dimensional case, we demonstrate that the 1xM bipartite entanglement of a multimode pure Gaussian state can be quantified by the minimum squared Euclidean distance between the state itself andmore » the set of states obtained by transforming it via suitable local symplectic (unitary) operations. This minimum distance, corresponding to a, uniquely determined, extremal local operation, defines an entanglement monotone equivalent to the entropy of entanglement, and amenable to direct experimental measurement with linear optical schemes.« less

  16. The Simplified Aircraft-Based Paired Approach With the ALAS Alerting Algorithm

    NASA Technical Reports Server (NTRS)

    Perry, Raleigh B.; Madden, Michael M.; Torres-Pomales, Wilfredo; Butler, Ricky W.

    2013-01-01

    This paper presents the results of an investigation of a proposed concept for closely spaced parallel runways called the Simplified Aircraft-based Paired Approach (SAPA). This procedure depends upon a new alerting algorithm called the Adjacent Landing Alerting System (ALAS). This study used both low fidelity and high fidelity simulations to validate the SAPA procedure and test the performance of the new alerting algorithm. The low fidelity simulation enabled a determination of minimum approach distance for the worst case over millions of scenarios. The high fidelity simulation enabled an accurate determination of timings and minimum approach distance in the presence of realistic trajectories, communication latencies, and total system error for 108 test cases. The SAPA procedure and the ALAS alerting algorithm were applied to the 750-ft parallel spacing (e.g., SFO 28L/28R) approach problem. With the SAPA procedure as defined in this paper, this study concludes that a 750-ft application does not appear to be feasible, but preliminary results for 1000-ft parallel runways look promising.

  17. A comparison of minimum distance and maximum likelihood techniques for proportion estimation

    NASA Technical Reports Server (NTRS)

    Woodward, W. A.; Schucany, W. R.; Lindsey, H.; Gray, H. L.

    1982-01-01

    The estimation of mixing proportions P sub 1, P sub 2,...P sub m in the mixture density f(x) = the sum of the series P sub i F sub i(X) with i = 1 to M is often encountered in agricultural remote sensing problems in which case the p sub i's usually represent crop proportions. In these remote sensing applications, component densities f sub i(x) have typically been assumed to be normally distributed, and parameter estimation has been accomplished using maximum likelihood (ML) techniques. Minimum distance (MD) estimation is examined as an alternative to ML where, in this investigation, both procedures are based upon normal components. Results indicate that ML techniques are superior to MD when component distributions actually are normal, while MD estimation provides better estimates than ML under symmetric departures from normality. When component distributions are not symmetric, however, it is seen that neither of these normal based techniques provides satisfactory results.

  18. Optical design of microlens array for CMOS image sensors

    NASA Astrophysics Data System (ADS)

    Zhang, Rongzhu; Lai, Liping

    2016-10-01

    The optical crosstalk between the pixel units can influence the image quality of CMOS image sensor. In the meantime, the duty ratio of CMOS is low because of its pixel structure. These two factors cause the low detection sensitivity of CMOS. In order to reduce the optical crosstalk and improve the fill factor of CMOS image sensor, a microlens array has been designed and integrated with CMOS. The initial parameters of the microlens array have been calculated according to the structure of a CMOS. Then the parameters have been optimized by using ZEMAX and the microlens arrays with different substrate thicknesses have been compared. The results show that in order to obtain the best imaging quality, when the effect of optical crosstalk for CMOS is the minimum, the best distance between microlens array and CMOS is about 19.3 μm. When incident light successively passes through microlens array and the distance, obtaining the minimum facula is around 0.347 um in the active area. In addition, when the incident angle of the light is 0o 22o, the microlens array has obvious inhibitory effect on the optical crosstalk. And the anti-crosstalk distance between microlens array and CMOS is 0 μm 162 μm.

  19. MINIMUM CORE MASSES FOR GIANT PLANET FORMATION WITH REALISTIC EQUATIONS OF STATE AND OPACITIES

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Piso, Ana-Maria A.; Murray-Clay, Ruth A.; Youdin, Andrew N., E-mail: apiso@cfa.harvard.edu

    2015-02-20

    Giant planet formation by core accretion requires a core that is sufficiently massive to trigger runaway gas accretion in less than the typical lifetime of protoplanetary disks. We explore how the minimum required core mass, M {sub crit}, depends on a non-ideal equation of state (EOS) and on opacity changes due to grain growth across a range of stellocentric distances from 5-100 AU. This minimum M {sub crit} applies when planetesimal accretion does not substantially heat the atmosphere. Compared to an ideal gas polytrope, the inclusion of molecular hydrogen (H{sub 2}) dissociation and variable occupation of H{sub 2} rotational statesmore » increases M {sub crit}. Specifically, M {sub crit} increases by a factor of ∼2 if the H{sub 2} spin isomers, ortho- and parahydrogen, are in thermal equilibrium, and by a factor of ∼2-4 if the ortho-to-para ratio is fixed at 3:1. Lower opacities due to grain growth reduce M {sub crit}. For a standard disk model around a Solar mass star, we calculate M {sub crit} ∼ 8 M {sub ⊕} at 5 AU, decreasing to ∼5 M {sub ⊕} at 100 AU, for a realistic EOS with an equilibrium ortho-to-para ratio and for grain growth to centimeter-sizes. If grain coagulation is taken into account, M {sub crit} may further reduce by up to one order of magnitude. These results for the minimum critical core mass are useful for the interpretation of surveys that find exoplanets at a range of orbital distances.« less

  20. Properties of star clusters - I. Automatic distance and extinction estimates

    NASA Astrophysics Data System (ADS)

    Buckner, Anne S. M.; Froebrich, Dirk

    2013-12-01

    Determining star cluster distances is essential to analyse their properties and distribution in the Galaxy. In particular, it is desirable to have a reliable, purely photometric distance estimation method for large samples of newly discovered cluster candidates e.g. from the Two Micron All Sky Survey, the UK Infrared Deep Sky Survey Galactic Plane Survey and VVV. Here, we establish an automatic method to estimate distances and reddening from near-infrared photometry alone, without the use of isochrone fitting. We employ a decontamination procedure of JHK photometry to determine the density of stars foreground to clusters and a galactic model to estimate distances. We then calibrate the method using clusters with known properties. This allows us to establish distance estimates with better than 40 per cent accuracy. We apply our method to determine the extinction and distance values to 378 known open clusters and 397 cluster candidates from the list of Froebrich, Scholz & Raftery. We find that the sample is biased towards clusters of a distance of approximately 3 kpc, with typical distances between 2 and 6 kpc. Using the cluster distances and extinction values, we investigate how the average extinction per kiloparsec distance changes as a function of the Galactic longitude. We find a systematic dependence that can be approximated by AH(l) [mag kpc-1] = 0.10 + 0.001 × |l - 180°|/° for regions more than 60° from the Galactic Centre.

  1. Packed Planetary Systems

    NASA Astrophysics Data System (ADS)

    Barnes, R.; Greenberg, R.

    2005-08-01

    Planetary systems display a wide range of appearances, with apparently arbitrary values of semi-major axis, eccentricity, etc. We reduce the complexity of orbital configurations to a single value, δ , which is a measure of how close, over secular timescales ( ˜10,000 orbits), two consecutive planets come to each other. We measure this distance relative to the sum of the radii of their Hill spheres, sometimes referred to as mutual Hill radii (MHR). We determine the closest approach distance by numerically integrating the entire system on coplanar orbits, using minimum masses. For non-resonant systems, close approach occurs during apsidal alignment, either parallel or anti-parallel. For resonant pairs the distance at conjunction determines the closest approach distance. Previous analytic work found that planets on circular orbits were assuredly unstable if they came within 3.5 MHR (i.e. Gladman 1993; Chambers, Wetherill & Boss 1996). We find that most known pairs of jovian planets (including those in our solar system) come within 3.5 -- 7 MHR of each other. We also find that several systems are unstable (their closest approach distance is less than 3.5 MHR). These systems, if they are real, probably exist in an observationally permitted location somewhat different from the current best fit. In these cases, the planets' closest approach distance will most likely also be slightly larger than 3.5 MHR. Most pairs beyond 7 MHR probably experienced post-formation migration (i.e. tidal circularization, inward scattering of small bodies) which moved them further apart. This result is even more remarkable since we have used the minimum masses; most likely the systems are inclined to the line of sight, making the Hill spheres larger, and shrinking δ . This dense packing may reflect a tendency for planets to form as close together as they can without being dynamically unstable. This result further implies there may be a large number of smaller, currently undetectable companions packed in orbits around stars with known planets.

  2. Theoretical studies on leaky-SAW properties influenced by layers on anisotropic piezoelectric crystals.

    PubMed

    Wallner, P; Ruile, W; Weigel, R

    2000-01-01

    Theoretical studies on the behavior of leaky-SAW (LSAW) properties in layered structures were performed. For these calculations rotYX LiTaO (3) and rotYX LiNbO(3) LSAW crystal cuts were used, assuming different layer materials. For LSAWs both the velocity and the inherent loss due to bulk wave emission into the substrate are strongly influenced by distinct layer parameters. As a result, these layer properties like elastic constants or thickness have shown a strong influence on the crystal cut angle of minimum LSAW loss. Moreover, for soft and stiff layer materials, a different shift of the LSAW loss minimum can occur. Therefore, using double-layer structures, the shift of the LSAW loss minimum can be influenced by appropriate chosen layers and ratios.

  3. A surgical simulator for peeling the inner limiting membrane during wet conditions.

    PubMed

    Omata, Seiji; Someya, Yusei; Adachi, Shyn'ya; Masuda, Taisuke; Hayakawa, Takeshi; Harada, Kanako; Mitsuishi, Mamoru; Totsuka, Kiyohito; Araki, Fumiyuki; Takao, Muneyuki; Aihara, Makoto; Arai, Fumihito

    2018-01-01

    The present study was performed to establish a novel ocular surgery simulator for training in peeling of the inner limited membrane (ILM). This simulator included a next-generation artificial ILM with mechanical properties similar to the natural ILM that could be peeled underwater in the same manner as in actual surgery. An artificial eye consisting of a fundus and eyeball parts was fabricated. The artificial eye was installed in the eye surgery simulator. The fundus part was mounted in the eyeball, which consisted of an artificial sclera, retina, and ILM. To measure the thickness of the fabricated ILM on the artificial retina, we calculated the distance of the step height as the thickness of the artificial ILM. Two experienced ophthalmologists then assessed the fabricated ILM by sensory evaluation. The minimum thickness of the artificial ILM was 1.9 ± 0.3 μm (n = 3). We were able to perform the peeling task with the ILM in water. Based on the sensory evaluation, an ILM with a minimum thickness and 1000 degrees of polymerization was suitable for training. We installed the eye model on an ocular surgery simulator, which allowed for the performance of a sequence of operations similar to ILM peeling. In conclusion, we developed a novel ocular surgery simulator for ILM peeling. The artificial ILM was peeled underwater in the same manner as in an actual operation.

  4. 13CO Survey of Northern Intermediate-Mass Star-Forming Regions

    NASA Astrophysics Data System (ADS)

    Lundquist, Michael J.; Kobulnicky, H. A.; Kerton, C. R.

    2014-01-01

    We conducted a survey of 13CO with the OSO 20-m telescope toward 68 intermediate-mass star-forming regions (IM SFRs) visible in the northern hemisphere. These regions have mostly been excluded from previous CO surveys and were selected from IRAS colors that specify cool dust and large PAH contribution. These regions are known to host stars up to, but not exceeding, about 8 solar masses. We detect 13CO in 57 of the 68 IM SFRs down to a typical RMS of ~50 mK. We present kinematic distances, minimum column densities, and minimum masses for these IM SFRs.

  5. Tracking of white-tailed deer migration by Global Positioning System

    USGS Publications Warehouse

    Nelson, M.E.; Mech, L.D.; Frame, P.F.

    2004-01-01

    Based on global positioning system (GPS) radiocollars in northeastern Minnesota, deer migrated 23-45 km in spring during 31-356 h, deviating a maximum 1.6-4.0 km perpendicular from a straight line of travel between their seasonal ranges. They migrated a minimum of 2.1-18.6 km/day over 11-56 h during 2-14 periods of travel. Minimum travel during 1-h intervals averaged 1.5 km/h. Deer paused 1-12 times, averaging 24 h/pause. Deer migrated similar distances in autumn with comparable rates and patterns of travel.

  6. Real-time stop sign detection and distance estimation using a single camera

    NASA Astrophysics Data System (ADS)

    Wang, Wenpeng; Su, Yuxuan; Cheng, Ming

    2018-04-01

    In modern world, the drastic development of driver assistance system has made driving a lot easier than before. In order to increase the safety onboard, a method was proposed to detect STOP sign and estimate distance using a single camera. In STOP sign detection, LBP-cascade classifier was applied to identify the sign in the image, and the principle of pinhole imaging was based for distance estimation. Road test was conducted using a detection system built with a CMOS camera and software developed by Python language with OpenCV library. Results shows that that the proposed system reach a detection accuracy of maximum of 97.6% at 10m, a minimum of 95.00% at 20m, and 5% max error in distance estimation. The results indicate that the system is effective and has the potential to be used in both autonomous driving and advanced driver assistance driving systems.

  7. A simplified flight-test method for determining aircraft takeoff performance that includes effects of pilot technique

    NASA Technical Reports Server (NTRS)

    Larson, T. J.; Schweikhard, W. G.

    1974-01-01

    A method for evaluating aircraft takeoff performance from brake release to air-phase height that requires fewer tests than conventionally required is evaluated with data for the XB-70 airplane. The method defines the effects of pilot technique on takeoff performance quantitatively, including the decrease in acceleration from drag due to lift. For a given takeoff weight and throttle setting, a single takeoff provides enough data to establish a standardizing relationship for the distance from brake release to any point where velocity is appropriate to rotation. The lower rotation rates penalized takeoff performance in terms of ground roll distance; the lowest observed rotation rate required a ground roll distance that was 19 percent longer than the highest. Rotations at the minimum rate also resulted in lift-off velocities that were approximately 5 knots lower than the highest rotation rate at any given lift-off distance.

  8. Ranging algebraically with more observations than unknowns

    NASA Astrophysics Data System (ADS)

    Awange, J. L.; Fukuda, Y.; Takemoto, S.; Ateya, I. L.; Grafarend, E. W.

    2003-07-01

    In the recently developed Spatial Reference System that is designed to check and control the accuracy of the three-dimensional coordinate measuring machines and tooling equipment (Metronom US., Inc., Ann Arbor: http://www.metronomus.com), the coordinates of the edges of the instrument are computed from distances of the bars. The use of distances in industrial application is fast gaining momentum just as in Geodesy and in Geophysical applications and thus necessitating efficient algorithms to solve the nonlinear distance equations. Whereas the ranging problem with minimum known stations was considered in our previous contribution in the same Journal, the present contribution extends to the case where one is faced with many distance observations than unknowns (overdetermined case) as is usually the case in practise. Using the Gauss-Jacobi Combinatorial approach, we demonstrate how one can proceed to position without reverting to iterative and linearizing procedures such as Newton's or Least Squares approach.

  9. Transitions between corona, glow, and spark regimes of nanosecond repetitively pulsed discharges in air at atmospheric pressure

    NASA Astrophysics Data System (ADS)

    Pai, David Z.; Lacoste, Deanna A.; Laux, Christophe O.

    2010-05-01

    In atmospheric pressure air preheated from 300 to 1000 K, the nanosecond repetitively pulsed (NRP) method has been used to generate corona, glow, and spark discharges. Experiments have been performed to determine the parameter space (applied voltage, pulse repetition frequency, ambient gas temperature, and interelectrode gap distance) of each discharge regime. In particular, the experimental conditions necessary for the glow regime of NRP discharges have been determined, with the notable result that there exists a minimum and maximum gap distance for its existence at a given ambient gas temperature. The minimum gap distance increases with decreasing gas temperature, whereas the maximum does not vary appreciably. To explain the experimental results, an analytical model is developed to explain the corona-to-glow (C-G) and glow-to-spark (G-S) transitions. The C-G transition is analyzed in terms of the avalanche-to-streamer transition and the breakdown field during the conduction phase following the establishment of a conducting channel across the discharge gap. The G-S transition is determined by the thermal ionization instability, and we show analytically that this transition occurs at a certain reduced electric field for the NRP discharges studied here. This model shows that the electrode geometry plays an important role in the existence of the NRP glow regime at a given gas temperature. We derive a criterion for the existence of the NRP glow regime as a function of the ambient gas temperature, pulse repetition frequency, electrode radius of curvature, and interelectrode gap distance.

  10. Floating and Tether-Coupled Adhesion of Bacteria to Hydrophobic and Hydrophilic Surfaces

    PubMed Central

    2018-01-01

    Models for bacterial adhesion to substratum surfaces all include uncertainty with respect to the (ir)reversibility of adhesion. In a model, based on vibrations exhibited by adhering bacteria parallel to a surface, adhesion was described as a result of reversible binding of multiple bacterial tethers that detach from and successively reattach to a surface, eventually making bacterial adhesion irreversible. Here, we use total internal reflection microscopy to determine whether adhering bacteria also exhibit variations over time in their perpendicular distance above surfaces. Streptococci with fibrillar surface tethers showed perpendicular vibrations with amplitudes of around 5 nm, regardless of surface hydrophobicity. Adhering, nonfibrillated streptococci vibrated with amplitudes around 20 nm above a hydrophobic surface. Amplitudes did not depend on ionic strength for either strain. Calculations of bacterial energies from their distances above the surfaces using the Boltzman equation showed that bacteria with fibrillar tethers vibrated as a harmonic oscillator. The energy of bacteria without fibrillar tethers varied with distance in a comparable fashion as the DLVO (Derjaguin, Landau, Verwey, and Overbeek)-interaction energy. Distance variations above the surface over time of bacteria with fibrillar tethers are suggested to be governed by the harmonic oscillations, allowed by elasticity of the tethers, piercing through the potential energy barrier. Bacteria without fibrillar tethers “float” above a surface in the secondary energy minimum, with their perpendicular displacement restricted by their thermal energy and the width of the secondary minimum. The distinction between “tether-coupled” and “floating” adhesion is new, and may have implications for bacterial detachment strategies. PMID:29649869

  11. Sensitivity of 30-cm mercury bombardment ion thruster characteristics to accelerator grid design

    NASA Technical Reports Server (NTRS)

    Rawlin, V. K.

    1978-01-01

    The design of ion optics for bombardment thrusters strongly influences overall performance and lifetime. The operation of a 30 cm thruster with accelerator grid open area fractions ranging from 43 to 24 percent, was evaluated and compared with experimental and theoretical results. Ion optics properties measured included the beam current extraction capability, the minimum accelerator grid voltage to prevent backstreaming, ion beamlet diameter as a function of radial position on the grid and accelerator grid hole diameter, and the high energy, high angle ion beam edge location. Discharge chamber properties evaluated were propellant utilization efficiency, minimum discharge power per beam amp, and minimum discharge voltage.

  12. An improved algorithm for evaluating trellis phase codes

    NASA Technical Reports Server (NTRS)

    Mulligan, M. G.; Wilson, S. G.

    1982-01-01

    A method is described for evaluating the minimum distance parameters of trellis phase codes, including CPFSK, partial response FM, and more importantly, coded CPM (continuous phase modulation) schemes. The algorithm provides dramatically faster execution times and lesser memory requirements than previous algorithms. Results of sample calculations and timing comparisons are included.

  13. An improved algorithm for evaluating trellis phase codes

    NASA Technical Reports Server (NTRS)

    Mulligan, M. G.; Wilson, S. G.

    1984-01-01

    A method is described for evaluating the minimum distance parameters of trellis phase codes, including CPFSK, partial response FM, and more importantly, coded CPM (continuous phase modulation) schemes. The algorithm provides dramatically faster execution times and lesser memory requirements than previous algorithms. Results of sample calculations and timing comparisons are included.

  14. 78 FR 61251 - Radio Broadcasting Services; Heber Springs, Arkansas.

    Federal Register 2010, 2011, 2012, 2013, 2014

    2013-10-03

    ...] Radio Broadcasting Services; Heber Springs, Arkansas. AGENCY: Federal Communications Commission. ACTION... third local service. Channel 270C3 can be allotted to Heber Springs consistent with the minimum distance... community. The reference coordinates are 35-34-12 NL and 91-55-41 WL. DATES: Comments must be filed on or...

  15. Some Evidence of Continuing Linguistic Acquisitions in Learning Adolescents.

    ERIC Educational Resources Information Center

    Thomas, Elizabeth K.; Walmsley, Sean A.

    The linguistic development of 42 learning disabled students 10-16 years old was examined. Responses were elicited to five linguistic structures, including the distinction between "ask" and "tell", pronominal restriction, and the minimum distance principle. Data were analyzed in terms of three groups based on Verbal and Performance differentials on…

  16. Performance Assessment Tools for Distance Learning and Simulation: Knowledge, Models and Tools to Improve the Effectiveness of Naval Distance Learning

    DTIC Science & Technology

    2006-06-01

    34/> <!-- someapplet.imi -- > <property narne="appletcontent"’ value="somecontent jar"!> <!- - someapplet.lml -- > <property narne="jnlpcodebasedir" value= gizmo "!> gizmo ...property name="jnlphref"’ value="gizmo.jnlp",’> 0!- - gizmo.jnlp -- > <property narne="jnlptitle"’ value="Nifty Gizmo !/> <!-- nifty gizmo

  17. Evaluation of nutraceutical properties of selected small millets.

    PubMed

    Rao, B Raghavendra; Nagasampige, Manojkumar H; Ravikiran, M

    2011-04-01

    The aim of this study was to evaluate the nutraceutical properties and nutritional value of grains of four selected small millets viz. finger millet, foxtail millet, prosomillet and khodomillet. The qualitative analysis of phytochemicals viz. phenolics, flavonoids, alkaloids and saponins present in the four small millets was done. The water-soluble proteins, crude fiber content and the reducing power of the grains of these four millets were analyzed. The khodomillet showed maximum phenolic content (10.3%) and foxtail millet showed minimum phenolics (2.5%). As far as reducing capacity was concerned, finger millet was highest (5.7%). The prosomillet showed least reducing property (2.6%). The finger millet (391.3 mg/g each) showed maximum reducing sugar content. The prosomillet showed minimum reducing sugar (195 mg/g). The foxtail millet showed maximum protein content (305.76 mg/g) and prosomillet showed minimum protein content (144.23 mg/g). The khodomillet showed maximum crude fiber content (14.3%).The finger millet showed maximum reducing sugar content (391.3 mg/g) whereas, the khodomillet showed minimum reducing sugar (130.43 mg/g).

  18. Whistler Waves Associated with Weak Interplanetary Shocks

    NASA Technical Reports Server (NTRS)

    Velez, J. C. Ramirez; Blanco-Cano, X.; Aguilar-Rodriguez, E.; Russell, C. T.; Kajdic, P.; Jian,, L. K.; Luhmann, J. G.

    2012-01-01

    We analyze the properties of 98 weak interplanetary shocks measured by the dual STEREO spacecraft over approximately 3 years during the past solar minimum. We study the occurrence of whistler waves associated with these shocks, which on average are high beta shocks (0.2 < Beta < 10). We have compared the waves properties upstream and downstream of the shocks. In the upstream region the waves are mainly circularly polarized, and in most of the cases (approx. 75%) they propagate almost parallel to the ambient magnetic field (<30 deg.). In contrast, the propagation angle with respect to the shock normal varies in a broad range of values (20 deg. to 90 deg.), suggesting that they are not phase standing. We find that the whistler waves can extend up to 100,000 km in the upstream region but in most cases (88%) are contained in a distance within 30,000 km from the shock. This corresponds to a larger region with upstream whistlers associated with IP shocks than previously reported in the literature. The maximum amplitudes of the waves are observed next to the shock interface, and they decrease as the distance to the shock increases. In most cases the wave propagation direction becomes more aligned with the magnetic field as the distance to the shock increases. These two facts suggest that most of the waves in the upstream region are Landau damping as they move away from the shock. From the analysis we also conclude that it is likely that the generation mechanism of the upstream whistler waves is taking place at the shock interface. In the downstream region, the waves are irregularly polarized, and the fluctuations are very compressive; that is, the compressive component of the wave clearly dominates over the transverse one. The majority of waves in the downstream region (95%) propagate at oblique angles with respect to the ambient magnetic field (>60 deg.). The wave propagation with respect to the shock-normal direction has no preferred direction and varies similarly to the upstream case. It is possible that downstream fluctuations are generated by ion relaxation as suggested in previous hybrid simulation shocks.

  19. Global Solar Magnetic Field Organization in the Outer Corona: Influence on the Solar Wind Speed and Mass Flux Over the Cycle

    NASA Astrophysics Data System (ADS)

    Réville, Victor; Brun, Allan Sacha

    2017-11-01

    The dynamics of the solar wind depends intrinsically on the structure of the global solar magnetic field, which undergoes fundamental changes over the 11-year solar cycle. For instance, the wind terminal velocity is thought to be anti-correlated with the expansion factor, a measure of how the magnetic field varies with height in the solar corona, usually computed at a fixed height (≈ 2.5 {R}⊙ , the source surface radius that approximates the distance at which all magnetic field lines become open). However, the magnetic field expansion affects the solar wind in a more detailed way, its influence on the solar wind properties remaining significant well beyond the source surface. We demonstrate this using 3D global magnetohydrodynamic (MHD) simulations of the solar corona, constrained by surface magnetograms over half a solar cycle (1989-2001). A self-consistent expansion beyond the solar wind critical point (even up to 10 {R}⊙ ) makes our model comply with observed characteristics of the solar wind, namely, that the radial magnetic field intensity becomes latitude independent at some distance from the Sun, and that the mass flux is mostly independent of the terminal wind speed. We also show that near activity minimum, the expansion in the higher corona has more influence on the wind speed than the expansion below 2.5 {R}⊙ .

  20. Mineral Physics Educational Modules for Advanced Undergraduates and Graduate Students

    NASA Astrophysics Data System (ADS)

    Burnley, P. C.; Thomas, S.; Honn, D. K.

    2011-12-01

    We are assembling a group of web-based educational modules for a course entitled "Introduction to Mineral Physics". Although the modules are designed to function as part of a full semester course, each module will also be able to stand alone. The modules are targeted at entry level graduate students and advanced undergraduate students. Learning outcomes for the course are being developed in consultation with educators throughout the mineral physics community. Potential users include mineral physicists teaching "bricks and mortar" graduate classes at their own institutions, mineral physicists teaching graduate classes in a distance education setting, mineralogy teachers interested in including supplementary material in their undergraduate mineralogy class, undergraduates doing independent study projects and graduate students and colleagues in other subdisciplines who wish to brush up on mineral physics topics. The modules reside on the Science Education Resource Center at Carleton College web site in the On the Cutting Edge - Teaching Mineralogy collection. Links to the materials will be posted on the Consortium for Materials Properties Research in Earth Sciences website. The modules will be piloted in a graduate level distance education course in mineral physics taught from UNLV during the spring 2012 semester. This course and others like it can address the current problems faced by faculty in state universities where rising minimum enrollments are making it difficult to teach a suitable graduate course to incoming students.

  1. Acoustic properties of humpback whale songs.

    PubMed

    Au, Whitlow W L; Pack, Adam A; Lammers, Marc O; Herman, Louis M; Deakos, Mark H; Andrews, Kim

    2006-08-01

    A vertical array of five hydrophones was used to measure the acoustic field in the vertical plane of singing humpback whales. Once a singer was located, two swimmers with snorkel gear were deployed to determine the orientation of the whale and position the boat so that the array could be deployed in front of the whale at a minimum standoff distance of at least 10 m. The spacing of the hydrophones was 7 m with the deepest hydrophone deployed at a depth of 35 m. An eight-channel TASCAM recorder with a bandwidth of 24 kHz was used to record the hydrophone signals. The location (distance and depth) of the singer was determined by computing the time of arrival differences between the hydrophone signals. The maximum source level varied between individual units in a song, with values between 151 and 173 dB re 1 microPa. One of the purposes of this study was to estimate potential sound exposure of nearby conspecifics. The acoustic field determined by considering the relative intensity of higher frequency harmonics in the signals indicated that the sounds are projected in the horizontal direction despite the singer being canted head downward anywhere from about 25 degrees to 90 degrees. High-frequency harmonics extended beyond 24 kHz, suggesting that humpback whales may have an upper frequency limit of hearing as high as 24 kHz.

  2. Effect of available space and previous contact in the social integration of Saint Croix and Suffolk ewes.

    PubMed

    Orihuela, A; Averós, X; Solano, J; Clemente, N; Estevez, I

    2016-03-01

    Reproduction in tropical sheep is not affected by season, whereas the reproductive cycle of temperate-climate breeds such as Suffolk depends on the photoperiod. Close contact with tropical ewes during the anestrous period might induce Suffolk ewes to cycle, making the use of artificial light or hormonal treatments unnecessary. However, the integration of both breeds within the social group would be necessary to trigger this effect, and so the aim of the experiment was to determine the speed of integration of 2 groups of Saint Croix and Suffolk ewes into a single flock, according to space allowance and previous experience. For this, 6 groups of 10 ewes (half from each breed) from both breeds, housed at 2 or 4 m/ewe (3 groups/treatment) and with or without previous contact with the other breed, were monitored for 3 d. Each observation day, the behavior, movement, and use of space of ewes were collected during 10 min at 1-h intervals between 0900 and 1400 h. Generalized linear mixed models were used to test the effects of breed, space allowance, and previous experience on behavior, movement, and use of space. Net distances, interbreed farthest neighbor distance, mean interbreed distance, and walking frequencies were greater at 4 m/ewe ( < 0.05). Intrabreed nearest neighbor, mean intrabreed neighbor, and interbreed nearest neighbor distances and minimum convex polygons at 4 m/ewe were greatest for Saint Croix ewes, whereas the opposite was found for lying down ( < 0.05). Experienced ewes showed larger intrabreed nearest neighbor distances, minimum convex polygons, and home range overlapping ( < 0.05). Experienced ewes at 4 m/ewe showed longest total distances and step lengths and greatest movement activity ( < 0.05). Experienced ewes walked longer total distances during Day 1 and 2 ( < 0.05). Lying down frequency was greater for Day 3 than Day 1 ( < 0.05), and Suffolk ewes kept longer interindividual distances during Day 1 ( < 0.05). After 3 d of cohabitation, Suffolk and Saint Croix ewes did not fully integrate into a cohesive flock, with each breed displaying specific behavioral patterns. Decreasing space allowance and previous experience resulted in limited benefits for the successful group cohesion. Longer cohabitation periods might result in complete integration, although practical implementation might be difficult.

  3. Node Deployment with k-Connectivity in Sensor Networks for Crop Information Full Coverage Monitoring

    PubMed Central

    Liu, Naisen; Cao, Weixing; Zhu, Yan; Zhang, Jingchao; Pang, Fangrong; Ni, Jun

    2016-01-01

    Wireless sensor networks (WSNs) are suitable for the continuous monitoring of crop information in large-scale farmland. The information obtained is great for regulation of crop growth and achieving high yields in precision agriculture (PA). In order to realize full coverage and k-connectivity WSN deployment for monitoring crop growth information of farmland on a large scale and to ensure the accuracy of the monitored data, a new WSN deployment method using a genetic algorithm (GA) is here proposed. The fitness function of GA was constructed based on the following WSN deployment criteria: (1) nodes must be located in the corresponding plots; (2) WSN must have k-connectivity; (3) WSN must have no communication silos; (4) the minimum distance between node and plot boundary must be greater than a specific value to prevent each node from being affected by the farmland edge effect. The deployment experiments were performed on natural farmland and on irregular farmland divided based on spatial differences of soil nutrients. Results showed that both WSNs gave full coverage, there were no communication silos, and the minimum connectivity of nodes was equal to k. The deployment was tested for different values of k and transmission distance (d) to the node. The results showed that, when d was set to 200 m, as k increased from 2 to 4 the minimum connectivity of nodes increases and is equal to k. When k was set to 2, the average connectivity of all nodes increased in a linear manner with the increase of d from 140 m to 250 m, and the minimum connectivity does not change. PMID:27941704

  4. Method for selecting minimum width of leaf in multileaf adjustable collimator while inhibiting passage of particle beams of radiation through sawtooth joints between collimator leaves

    DOEpatents

    Ludewigt, Bernhard; Bercovitz, John; Nyman, Mark; Chu, William

    1995-01-01

    A method is disclosed for selecting the minimum width of individual leaves of a multileaf adjustable collimator having sawtooth top and bottom surfaces between adjacent leaves of a first stack of leaves and sawtooth end edges which are capable of intermeshing with the corresponding sawtooth end edges of leaves in a second stack of leaves of the collimator. The minimum width of individual leaves in the collimator, each having a sawtooth configuration in the surface facing another leaf in the same stack and a sawtooth end edge, is selected to comprise the sum of the penetration depth or range of the particular type of radiation comprising the beam in the particular material used for forming the leaf; plus the total path length across all the air gaps in the area of the joint at the edges between two leaves defined between lines drawn across the peaks of adjacent sawtooth edges; plus at least one half of the length or period of a single sawtooth. To accomplish this, in accordance with the method of the invention, the penetration depth of the particular type of radiation in the particular material to be used for the collimator leaf is first measured. Then the distance or gap between adjoining or abutting leaves is selected, and the ratio of this distance to the height of the sawteeth is selected. Finally the number of air gaps through which the radiation will pass between sawteeth is determined by selecting the number of sawteeth to be formed in the joint. The measurement and/or selection of these parameters will permit one to determine the minimum width of the leaf which is required to prevent passage of the beam through the sawtooth joint.

  5. Minimum viewing angle for visually guided ground speed control in bumblebees.

    PubMed

    Baird, Emily; Kornfeldt, Torill; Dacke, Marie

    2010-05-01

    To control flight, flying insects extract information from the pattern of visual motion generated during flight, known as optic flow. To regulate their ground speed, insects such as honeybees and Drosophila hold the rate of optic flow in the axial direction (front-to-back) constant. A consequence of this strategy is that its performance varies with the minimum viewing angle (the deviation from the frontal direction of the longitudinal axis of the insect) at which changes in axial optic flow are detected. The greater this angle, the later changes in the rate of optic flow, caused by changes in the density of the environment, will be detected. The aim of the present study is to examine the mechanisms of ground speed control in bumblebees and to identify the extent of the visual range over which optic flow for ground speed control is measured. Bumblebees were trained to fly through an experimental tunnel consisting of parallel vertical walls. Flights were recorded when (1) the distance between the tunnel walls was either 15 or 30 cm, (2) the visual texture on the tunnel walls provided either strong or weak optic flow cues and (3) the distance between the walls changed abruptly halfway along the tunnel's length. The results reveal that bumblebees regulate ground speed using optic flow cues and that changes in the rate of optic flow are detected at a minimum viewing angle of 23-30 deg., with a visual field that extends to approximately 155 deg. By measuring optic flow over a visual field that has a low minimum viewing angle, bumblebees are able to detect and respond to changes in the proximity of the environment well before they are encountered.

  6. REDSHIFT-INDEPENDENT DISTANCES IN THE NASA/IPAC EXTRAGALACTIC DATABASE: METHODOLOGY, CONTENT, AND USE OF NED-D

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Steer, Ian; Madore, Barry F.; Mazzarella, Joseph M.

    Estimates of galaxy distances based on indicators that are independent of cosmological redshift are fundamental to astrophysics. Researchers use them to establish the extragalactic distance scale, to underpin estimates of the Hubble constant, and to study peculiar velocities induced by gravitational attractions that perturb the motions of galaxies with respect to the “Hubble flow” of universal expansion. In 2006 the NASA/IPAC Extragalactic Database (NED) began making available a comprehensive compilation of redshift-independent extragalactic distance estimates. A decade later, this compendium of distances (NED-D) now contains more than 100,000 individual estimates based on primary and secondary indicators, available for more thanmore » 28,000 galaxies, and compiled from over 2000 references in the refereed astronomical literature. This paper describes the methodology, content, and use of NED-D, and addresses challenges to be overcome in compiling such distances. Currently, 75 different distance indicators are in use. We include a figure that facilitates comparison of the indicators with significant numbers of estimates in terms of the minimum, 25th percentile, median, 75th percentile, and maximum distances spanned. Brief descriptions of the indicators, including examples of their use in the database, are given in an appendix.« less

  7. Multiobjective Policy Analysis to Evaluate Air Quality Impacts of Oil and Gas Regulations

    NASA Astrophysics Data System (ADS)

    Alongi, M.; Kasprzyk, J. R.; Milford, J.; Ryan, J. N.; Estep, M.

    2016-12-01

    Unconventional oil and gas development (UOGD) using hydraulic fracturing and horizontal drilling has recently fostered an unprecedented acceleration in energy development. Regulations seek to protect the public health of communities in proximity to UOGD and the environmental quality of these regions, while maintaining economic benefits. One such regulation is the setback distance, which dictates the minimum distance between an oil and gas well and an occupied structure, such as a residential or commercial building, or an area of special concern. This presentation discusses a new policy analysis framework for UOGD regulations, using the Borg multiobjective evolutionary algorithm (MOEA) coupled with AERMOD, a regulatory air dispersion model. The initial results explore how setback distance and well density regulations could impact the number of wells that can be drilled, based on a set of performance objectives that model potential increases in benzene, a hazardous air pollutant that has been linked to cancer and other detrimental health effects. The simulation calculates daily benzene averages using meteorological data from Greeley, CO. An important aspect of this work is to define representative quantitative objectives that accurately capture salient characteristics of the pollutant time series. For example, our framework will characterize the maximum concentration found over the entire spatial domain and over the duration of the simulation. Frequency-based objectives will also be explored, such as the number of exceedances of the benchmark annual average benzene concentration corresponding to a given level of cancer risk. The multiobjective analysis can also be expanded to integrate other objectives that represent performance-based outcomes on UOGD such as energy development profits, increases in noise pollution and decreases in property value. This research represents one application of how MOEAs can be used to inform policymaking for environmental regulations.

  8. Detection of pseudocowpox virus in water buffalo (Bubalus bubalis) with vesicular disease in the state of São Paulo, Brazil, in 2016.

    PubMed

    Laguardia-Nascimento, Mateus; de Oliveira, Ana Paula Ferreira; Fernandes, Fernanda Rodas Pires; Rivetti, Anselmo Vasconcelos; Camargos, Marcelo Fernandes; Fonseca Júnior, Antônio Augusto

    2017-12-01

    Parapoxviruses are zoonotic viruses that infect cattle, goats and sheep; there have also been reports of infections in camels, domestic cats and seals. The objective of this report was to describe a case of vesicular disease caused by pseudocowpox virus (PCPV) in water buffalo (Bubalus bubalis) in Brazil. Sixty buffalo less than 6 months old exhibited ulcers and widespread peeling of the tongue epithelium. There were no cases of vesicular disease in pigs or horses on the same property. Samples were analysed by PCR and sequencing. Phylogenetic analysis in MEGA 7.01 was reconstructed using major envelope protein (B2L) by the Tamura three-parameter nucleotide substitution model and the maximum likelihood and neighbor joining models, both with 1000 bootstrap replicates. The genetic distance between the groups was analysed in MEGA using the maximum composite likelihood model. The rate variation among sites was modeled using gamma distribution. The presence of PCPV in the buffalo herd could be demonstrated in epithelium and serum. The minimum genetic distance between the isolated PCPV strain (262-2016) and orf virus and bovine papular stomatitis virus was 6.7% and 18.4%, respectively. The maximum genetic distance calculated was 4.6% when compared with a PCPV detected in a camel. Conclusions/Clinical Importance: The peculiar position of the isolated strain in the phylogenetic trees does not necessarily indicate a different kind of PCPV that infects buffalo. More samples from cattle and buffalo in Brazil must be sequenced and compared to verify if PCPV from buffalo are genetically different from samples derived from cattle.

  9. The origin of facet selectivity and alignment in anatase TiO 2 nanoparticles in electrolyte solutions: implications for oriented attachment in metal oxides

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Sushko, M. L.; Rosso, K. M.

    Atomic-to-mesoscale simulations were used to reveal the origin of oriented attachment between anatase TiO2 nanoparticles in aqueous HCl solutions. Analysis of the distance and pH dependence of interparticle interactions demonstrates that ion correlation forces are responsible for facet-specific attraction and rotation into lattice co-alignment at long-range. These forces give rise to a metastable solvent separated capture minimum on the disjoining pressure-distance curve, with the barrier to attachment largely due to steric hydration forces from structured intervening solvent.

  10. A study of polaritonic transparency in couplers made from excitonic materials

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Singh, Mahi R.; Racknor, Chris

    2015-03-14

    We have studied light matter interaction in quantum dot and exciton-polaritonic coupler hybrid systems. The coupler is made by embedding two slabs of an excitonic material (CdS) into a host excitonic material (ZnO). An ensemble of non-interacting quantum dots is doped in the coupler. The bound exciton polariton states are calculated in the coupler using the transfer matrix method in the presence of the coupling between the external light (photons) and excitons. These bound exciton-polaritons interact with the excitons present in the quantum dots and the coupler is acting as a reservoir. The Schrödinger equation method has been used tomore » calculate the absorption coefficient in quantum dots. It is found that when the distance between two slabs (CdS) is greater than decay length of evanescent waves the absorption spectrum has two peaks and one minimum. The minimum corresponds to a transparent state in the system. However, when the distance between the slabs is smaller than the decay length of evanescent waves, the absorption spectra has three peaks and two transparent states. In other words, one transparent state can be switched to two transparent states when the distance between the two layers is modified. This could be achieved by applying stress and strain fields. It is also found that transparent states can be switched on and off by applying an external control laser field.« less

  11. Discontinuous Fiber-reinforced Composites above Critical Length

    PubMed Central

    Petersen, R.C.

    2014-01-01

    Micromechanical physics of critical fiber length, describing a minimum filament distance for resin impregnation and stress transfer, has not yet been applied in dental science. As a test of the hypothesis that 9-micron-diameter, 3-mm-long quartz fibers would increase mechanical strength over particulate-filled composites, photocure-resin-pre-impregnated discontinuous reinforcement was incorporated at 35 wt% into 3M Corporation Z100, Kerr Corporation HerculiteXRV, and an experimental photocure paste with increased radiopaque particulate. Fully articulated four-point bend testing per ASTM C 1161-94 for advanced ceramics and Izod impact testing according to a modified unnotched ASTM D 256-00 specification were then performed. All photocure-fiber-reinforced composites demonstrated significant improvements over particulate-filled compounds (p < 0.001) for flexural strength, modulus, work of fracture, strain at maximum load, and Izod toughness, with one exception for the moduli of Z100 and the experimental reinforced paste. The results indicate that inclusion of pre-impregnated fibers above the critical aspect ratio yields major advancements regarding the mechanical properties tested. PMID:15790745

  12. Avoidance of singularities in asymptotically safe Quantum Einstein Gravity

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kofinas, Georgios; Zarikas, Vasilios; Department of Physics, Aristotle University of Thessaloniki,54124 Thessaloniki

    2015-10-30

    New general spherically symmetric solutions have been derived with a cosmological “constant” Λ as a source. This Λ term is not constant but it satisfies the properties of the asymptotically safe gravity at the ultraviolet fixed point. The importance of these solutions comes from the fact that they may describe the near to the centre region of black hole spacetimes as this is modified by the Renormalization Group scaling behaviour of the fields. The consistent set of field equations which respect the Bianchi identities is derived and solved. One of the solutions (with conventional sign of temporal-radial metric components) ismore » timelike geodesically complete, and although there is still a curvature divergent origin, this is never approachable by an infalling massive particle which is reflected at a finite distance due to the repulsive origin. Another family of solutions (of both signatures) range from a finite radius outwards, they cannot be extended to the centre of spherical symmetry, and the curvature invariants are finite at the minimum radius.« less

  13. Avoidance of singularities in asymptotically safe Quantum Einstein Gravity

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Kofinas, Georgios; Zarikas, Vasilios, E-mail: gkofinas@aegean.gr, E-mail: vzarikas@teilam.gr

    2015-10-01

    New general spherically symmetric solutions have been derived with a cosmological ''constant'' Λ as a source. This Λ term is not constant but it satisfies the properties of the asymptotically safe gravity at the ultraviolet fixed point. The importance of these solutions comes from the fact that they may describe the near to the centre region of black hole spacetimes as this is modified by the Renormalization Group scaling behaviour of the fields. The consistent set of field equations which respect the Bianchi identities is derived and solved. One of the solutions (with conventional sign of temporal-radial metric components) ismore » timelike geodesically complete, and although there is still a curvature divergent origin, this is never approachable by an infalling massive particle which is reflected at a finite distance due to the repulsive origin. Another family of solutions (of both signatures) range from a finite radius outwards, they cannot be extended to the centre of spherical symmetry, and the curvature invariants are finite at the minimum radius.« less

  14. Spanning trees and the Eurozone crisis

    NASA Astrophysics Data System (ADS)

    Dias, João

    2013-12-01

    The sovereign debt crisis in the euro area has not yet been solved and recent developments in Spain and Italy have further deteriorated the situation. In this paper we develop a new approach to analyze the ongoing Eurozone crisis. Firstly, we use Maximum Spanning Trees to analyze the topological properties of government bond rates’ dynamics. Secondly, we combine the information given by both Maximum and Minimum Spanning Trees to obtain a measure of market dissimilarity or disintegration. Thirdly, we extend this measure to include a convenient distance not limited to the interval [0, 2]. Our empirical results show that Maximum Spanning Tree gives an adequate description of the separation of the euro area into two distinct groups: those countries strongly affected by the crisis and those that have remained resilient during this period. The measures of market dissimilarity also reveal a persistent separation of these two groups and, according to our second measure, this separation strongly increased during the period July 2009-March 2012.

  15. Deuterium cluster model for low energy nuclear reactions (LENR)

    NASA Astrophysics Data System (ADS)

    Miley, George; Hora, Heinrich

    2007-11-01

    For studying the possible reactions of high density deuterons on the background of a degenerate electron gas, a summary of experimental observations resulted in the possibility of reactions in pm distance and more than ksec duration similar to the K-shell electron capture [1]. The essential reason was the screening of the deuterons by a factor of 14 based on the observations. Using the bosonic properties for a cluster formation of the deuterons and a model of compound nuclear reactions [2], the measured distribution of the resulting nuclei may be explained as known from the Maruhn-Greiner theory for fission. The local maximum of the distribution at the main minimum indicates the excited states of the compound nuclei during their intermediary state. This measured local maximum may be an independent proof for the deuteron clusters at LENR. [1] H. Hora, G.H. Miley et al. Physics Letters A175, 138 (1993) [2] H. Hora and G.H. Miley, APS March Meeting 2007, Program p. 116

  16. Optimum dimensions of power solenoids for magnetic suspension

    NASA Technical Reports Server (NTRS)

    Kaznacheyev, B. A.

    1985-01-01

    Design optimization of power solenoids for controllable and stabilizable magnetic suspensions with force compensation in a wind tunnel is shown. It is assumed that the model of a levitating body is a sphere of ferromagnetic material with constant magnetic permeability. This sphere, with a radius much smaller than its distance from the solenoid above, is to be maintained in position on the solenoid axis by balance of the vertical electromagnetic force and the force of gravitation. The necessary vertical (axial) force generated by the solenoid is expressed as a function of relevant system dimensions, solenoid design parameters, and physical properties of the body. Three families of curves are obtained which depict the solenoid power for a given force as a function of the solenoid length with either outside radius or inside radius as a variable parameter and as a function of the outside radius with inside radius as a variable parameter. The curves indicate the optimum solenoid length and outside radius, for minimum power, corresponding to a given outside radius and inside radius, respectively.

  17. A finite-state, finite-memory minimum principle, part 2

    NASA Technical Reports Server (NTRS)

    Sandell, N. R., Jr.; Athans, M.

    1975-01-01

    In part 1 of this paper, a minimum principle was found for the finite-state, finite-memory (FSFM) stochastic control problem. In part 2, conditions for the sufficiency of the minimum principle are stated in terms of the informational properties of the problem. This is accomplished by introducing the notion of a signaling strategy. Then a min-H algorithm based on the FSFM minimum principle is presented. This algorithm converges, after a finite number of steps, to a person - by - person extremal solution.

  18. Multi-image acquisition-based distance sensor using agile laser spot beam.

    PubMed

    Riza, Nabeel A; Amin, M Junaid

    2014-09-01

    We present a novel laser-based distance measurement technique that uses multiple-image-based spatial processing to enable distance measurements. Compared with the first-generation distance sensor using spatial processing, the modified sensor is no longer hindered by the classic Rayleigh axial resolution limit for the propagating laser beam at its minimum beam waist location. The proposed high-resolution distance sensor design uses an electronically controlled variable focus lens (ECVFL) in combination with an optical imaging device, such as a charged-coupled device (CCD), to produce and capture different laser spot size images on a target with these beam spot sizes different from the minimal spot size possible at this target distance. By exploiting the unique relationship of the target located spot sizes with the varying ECVFL focal length for each target distance, the proposed distance sensor can compute the target distance with a distance measurement resolution better than the axial resolution via the Rayleigh resolution criterion. Using a 30 mW 633 nm He-Ne laser coupled with an electromagnetically actuated liquid ECVFL, along with a 20 cm focal length bias lens, and using five spot images captured per target position by a CCD-based Nikon camera, a proof-of-concept proposed distance sensor is successfully implemented in the laboratory over target ranges from 10 to 100 cm with a demonstrated sub-cm axial resolution, which is better than the axial Rayleigh resolution limit at these target distances. Applications for the proposed potentially cost-effective distance sensor are diverse and include industrial inspection and measurement and 3D object shape mapping and imaging.

  19. 75 FR 71148 - Solicitation for a Cooperative Agreement-Production of Seven Live Satellite/Internet Broadcasts

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-22

    ... defined as training/ education transpiring between trainers and facilitators at one location and... NIC's distance learning administrator (DLA) on program design, program coordination, design and field... activities that support each broadcast. A minimum of one face-to-face planning session will be held for each...

  20. 76 FR 295 - Proposed Amendments to the Water Quality Regulations, Water Code and Comprehensive Plan To...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-01-04

    ... endangered (T&E) species. Minimum setbacks from water bodies, wetlands, surface water supply intakes and water supply reservoirs at distances specified in the regulations, and from occupied homes, public buildings, public roads, public water supply wells, and domestic water supply wells as provided by...

  1. 24 CFR 3280.611 - Vents and venting.

    Code of Federal Regulations, 2014 CFR

    2014-04-01

    ... drain piping for each toilet shall be vented by a 11/2 inch minimum diameter vent or rectangular vent of..., connected to the toilet drain by one of the following methods: (i) A 11/2 inch diameter (min.) individual vent pipe or equivalent directly connected to the toilet drain within the distance allowed in § 3280...

  2. 75 FR 70854 - Harmonization of Various Airworthiness Standards for Transport Category Airplanes-Flight Rules

    Federal Register 2010, 2011, 2012, 2013, 2014

    2010-11-19

    ..., deploy speed brakes) to stop the airplane within the accelerate stop distance. It also means the minimum... flight diving speed. List of Subjects in 14 CFR Part 25 Aircraft, Aviation safety, Reporting and... transport category airplanes. This action would harmonize the requirements for takeoff speeds, static...

  3. 40 CFR 86.436-78 - Additional service accumulation.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... minimum test distance and at the useful life, and, (3) The results of the half life emission tests, when... Regulations for 1978 and Later New Motorcycles, General Provisions § 86.436-78 Additional service accumulation. (a) Additional service up to the useful life will be accumulated under the same conditions as the...

  4. 40 CFR 86.436-78 - Additional service accumulation.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... minimum test distance and at the useful life, and, (3) The results of the half life emission tests, when... Regulations for 1978 and Later New Motorcycles, General Provisions § 86.436-78 Additional service accumulation. (a) Additional service up to the useful life will be accumulated under the same conditions as the...

  5. 29 CFR 1910.110 - Storage and handling of liquefied petroleum gases.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    .... (i) Containers used with systems embodied in paragraphs (d), (e), (g), and (h) of this section... unit of weight for containers with a water capacity of 300 pounds or less. (h) With marking indicating... Table H-23. Table H-23 Water capacity per container Minimum distances Containers Underground Aboveground...

  6. 29 CFR 1910.110 - Storage and handling of liquefied petroleum gases.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    .... (i) Containers used with systems embodied in paragraphs (d), (e), (g), and (h) of this section... unit of weight for containers with a water capacity of 300 pounds or less. (h) With marking indicating... Table H-23. Table H-23 Water capacity per container Minimum distances Containers Underground Aboveground...

  7. 46 CFR 45.69 - Correction for bow height.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... consideration by the Commandant. (e) The bow height is defined as the vertical distance at the forward... 46 Shipping 2 2014-10-01 2014-10-01 false Correction for bow height. 45.69 Section 45.69 Shipping... § 45.69 Correction for bow height. (a) The minimum summer freeboard of all manned vessels must be...

  8. 14 CFR 77.9 - Construction or alteration requiring notice.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... section. (c) Any highway, railroad, or other traverse way for mobile objects, of a height which, if... Interstate Highways where overcrossings are designed for a minimum of 17 feet vertical distance, 15 feet for any other public roadway, 10 feet or the height of the highest mobile object that would normally...

  9. 46 CFR 45.69 - Correction for bow height.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... consideration by the Commandant. (e) The bow height is defined as the vertical distance at the forward... 46 Shipping 2 2012-10-01 2012-10-01 false Correction for bow height. 45.69 Section 45.69 Shipping... § 45.69 Correction for bow height. (a) The minimum summer freeboard of all manned vessels must be...

  10. 14 CFR 77.9 - Construction or alteration requiring notice.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... section. (c) Any highway, railroad, or other traverse way for mobile objects, of a height which, if... Interstate Highways where overcrossings are designed for a minimum of 17 feet vertical distance, 15 feet for any other public roadway, 10 feet or the height of the highest mobile object that would normally...

  11. 14 CFR 77.9 - Construction or alteration requiring notice.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... section. (c) Any highway, railroad, or other traverse way for mobile objects, of a height which, if... Interstate Highways where overcrossings are designed for a minimum of 17 feet vertical distance, 15 feet for any other public roadway, 10 feet or the height of the highest mobile object that would normally...

  12. 46 CFR 45.69 - Correction for bow height.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... consideration by the Commandant. (e) The bow height is defined as the vertical distance at the forward... 46 Shipping 2 2013-10-01 2013-10-01 false Correction for bow height. 45.69 Section 45.69 Shipping... § 45.69 Correction for bow height. (a) The minimum summer freeboard of all manned vessels must be...

  13. 14 CFR 135.203 - VFR: Minimum altitudes.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... REQUIREMENTS: COMMUTER AND ON DEMAND OPERATIONS AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT VFR/IFR... above the surface or less than 500 feet horizontally from any obstacle; or (2) At night, at an altitude less than 1,000 feet above the highest obstacle within a horizontal distance of 5 miles from the course...

  14. Mapping Health Data: Improved Privacy Protection With Donut Method Geomasking

    PubMed Central

    Hampton, Kristen H.; Fitch, Molly K.; Allshouse, William B.; Doherty, Irene A.; Gesink, Dionne C.; Leone, Peter A.; Serre, Marc L.; Miller, William C.

    2010-01-01

    A major challenge in mapping health data is protecting patient privacy while maintaining the spatial resolution necessary for spatial surveillance and outbreak identification. A new adaptive geomasking technique, referred to as the donut method, extends current methods of random displacement by ensuring a user-defined minimum level of geoprivacy. In donut method geomasking, each geocoded address is relocated in a random direction by at least a minimum distance, but less than a maximum distance. The authors compared the donut method with current methods of random perturbation and aggregation regarding measures of privacy protection and cluster detection performance by masking multiple disease field simulations under a range of parameters. Both the donut method and random perturbation performed better than aggregation in cluster detection measures. The performance of the donut method in geoprivacy measures was at least 42.7% higher and in cluster detection measures was less than 4.8% lower than that of random perturbation. Results show that the donut method provides a consistently higher level of privacy protection with a minimal decrease in cluster detection performance, especially in areas where the risk to individual geoprivacy is greatest. PMID:20817785

  15. Mapping health data: improved privacy protection with donut method geomasking.

    PubMed

    Hampton, Kristen H; Fitch, Molly K; Allshouse, William B; Doherty, Irene A; Gesink, Dionne C; Leone, Peter A; Serre, Marc L; Miller, William C

    2010-11-01

    A major challenge in mapping health data is protecting patient privacy while maintaining the spatial resolution necessary for spatial surveillance and outbreak identification. A new adaptive geomasking technique, referred to as the donut method, extends current methods of random displacement by ensuring a user-defined minimum level of geoprivacy. In donut method geomasking, each geocoded address is relocated in a random direction by at least a minimum distance, but less than a maximum distance. The authors compared the donut method with current methods of random perturbation and aggregation regarding measures of privacy protection and cluster detection performance by masking multiple disease field simulations under a range of parameters. Both the donut method and random perturbation performed better than aggregation in cluster detection measures. The performance of the donut method in geoprivacy measures was at least 42.7% higher and in cluster detection measures was less than 4.8% lower than that of random perturbation. Results show that the donut method provides a consistently higher level of privacy protection with a minimal decrease in cluster detection performance, especially in areas where the risk to individual geoprivacy is greatest.

  16. The Stability of Main Characteristics of Possible Impacts of Asteroids with the Earth

    NASA Astrophysics Data System (ADS)

    Borukha, M.; Sokolov, L.; Petrov, N.; Vasiliev, A.

    2017-12-01

    The stability of the characteristics of asteroids trajectories leading to collisions with the Earth under small changes of the nominal orbit and the motion model (disturbing forces, integrator, etc.) is discussed. Examples of small changes in the relative positions and sizes of the keyholes leading to collisions, moments of collisions and minimum geocentric distances are demonstrated. It is shown that various ways of specifying the relative positions and sizes of the keyholes are possible, in particular, using differences in the osculating elements of the semi-major axis, as well as the differences of the minimum geocentric distances in the previous approach. Comparisons are made using examples of models of the Solar system DE403, DE405, DE430 for various nominal orbits of asteroids Apophis, 2015 RN35 and others. The ranges and causes for the observed stability are discussed. The stability of the structure of possible collisions is associated with the Lyapunov instability of the motion of asteroids during approach. This work is supported by RFBR grant 15-02-04340 and a grant from St. Petersburg State University 6.37.341.2015.

  17. Model-based multiple patterning layout decomposition

    NASA Astrophysics Data System (ADS)

    Guo, Daifeng; Tian, Haitong; Du, Yuelin; Wong, Martin D. F.

    2015-10-01

    As one of the most promising next generation lithography technologies, multiple patterning lithography (MPL) plays an important role in the attempts to keep in pace with 10 nm technology node and beyond. With feature size keeps shrinking, it has become impossible to print dense layouts within one single exposure. As a result, MPL such as double patterning lithography (DPL) and triple patterning lithography (TPL) has been widely adopted. There is a large volume of literature on DPL/TPL layout decomposition, and the current approach is to formulate the problem as a classical graph-coloring problem: Layout features (polygons) are represented by vertices in a graph G and there is an edge between two vertices if and only if the distance between the two corresponding features are less than a minimum distance threshold value dmin. The problem is to color the vertices of G using k colors (k = 2 for DPL, k = 3 for TPL) such that no two vertices connected by an edge are given the same color. This is a rule-based approach, which impose a geometric distance as a minimum constraint to simply decompose polygons within the distance into different masks. It is not desired in practice because this criteria cannot completely capture the behavior of the optics. For example, it lacks of sufficient information such as the optical source characteristics and the effects between the polygons outside the minimum distance. To remedy the deficiency, a model-based layout decomposition approach to make the decomposition criteria base on simulation results was first introduced at SPIE 2013.1 However, the algorithm1 is based on simplified assumption on the optical simulation model and therefore its usage on real layouts is limited. Recently AMSL2 also proposed a model-based approach to layout decomposition by iteratively simulating the layout, which requires excessive computational resource and may lead to sub-optimal solutions. The approach2 also potentially generates too many stiches. In this paper, we propose a model-based MPL layout decomposition method using a pre-simulated library of frequent layout patterns. Instead of using the graph G in the standard graph-coloring formulation, we build an expanded graph H where each vertex represents a group of adjacent features together with a coloring solution. By utilizing the library and running sophisticated graph algorithms on H, our approach can obtain optimal decomposition results efficiently. Our model-based solution can achieve a practical mask design which significantly improves the lithography quality on the wafer compared to the rule based decomposition.

  18. Optimal tyre usage for a Formula One car

    NASA Astrophysics Data System (ADS)

    Tremlett, A. J.; Limebeer, D. J. N.

    2016-10-01

    Variations in track temperature, surface conditions and layout have led tyre manufacturers to produce a range of rubber compounds for race events. Each compound has unique friction and durability characteristics. Efficient tyre management over a full race distance is a crucial component of a competitive race strategy. A minimum lap time optimal control calculation and a thermodynamic tyre wear model are used to establish optimal tyre warming and tyre usage strategies. Lap time sensitivities demonstrate that relatively small changes in control strategy can lead to significant reductions in the associated wear metrics. The illustrated methodology shows how vehicle setup parameters can be optimised for minimum tyre usage.

  19. Root and Canal Morphology of Mandibular Molars in a Selected Iranian Population Using Cone-Beam Computed Tomography

    PubMed Central

    Madani, Zahra Sadat; Mehraban, Nika; Moudi, Ehsan; Bijani, Ali

    2017-01-01

    Introduction: The aim of this study was to evaluate the root canal morphology of mandibular first and second molars using cone-beam computed tomography (CBCT) in northern Iranian population and also to indicate the thinnest area around root canals. Methods and Materials: We evaluated CBCT images of 154 first molars and 147 second molars. By evaluating three axial, sagittal and coronal planes of each tooth we determined the number of root canals, prevalence of C-shaped Melton types, and prevalence of Vertucci configuration and inter orifice distance. Also the minimum wall thickness of root canals was determined by measuring buccal, lingual, distal and mesial wall thicknesses of each canal in levels with 2 mm intervals from apex to orifice. Results: Amongst 154 first mandibular molars, 149 (96.7%) had two roots, 3 (1.9%) had three roots and 2 (1.2%) had C-shaped root configuration. Of 147 second mandibular molars, 120 (81.6%) had two roots, 1 (0.6%) had three roots and 26 (17.6%) had C-shaped roots. There was no significant difference in the prevalence of Vertucci’s type between two genders. The most common configuration in mesial roots of first and second molars were type IV (57%-42.9%) and type II (31.5%-28%). Mesial and distal walls had the most frequency as the thinnest wall in all levels of root canals with mostly less than 1 mm thickness. In second molars the DB-DL inter orifice distance and in first molars the MB-ML distance were the minimum. MB-D in first molars had the maximum distance while ML-DL, MB-DB and ML-D had the same and maximum distance in second molars. Conclusion: Vertucci’s type IV and type I were the most prevalent configurations in mesial and distal roots of first and second mandibular molars and the thickness of thinnest area around the canals should be considered during endodontic treatments. PMID:28512476

  20. Minimum uncertainty and squeezing in diffusion processes and stochastic quantization

    NASA Technical Reports Server (NTRS)

    Demartino, S.; Desiena, S.; Illuminati, Fabrizo; Vitiello, Giuseppe

    1994-01-01

    We show that uncertainty relations, as well as minimum uncertainty coherent and squeezed states, are structural properties for diffusion processes. Through Nelson stochastic quantization we derive the stochastic image of the quantum mechanical coherent and squeezed states.

  1. SU-E-T-489: Quantum versus Classical Trajectory Monte Carlo Simulations of Low Energy Electron Transport.

    PubMed

    Thomson, R; Kawrakow, I

    2012-06-01

    Widely-used classical trajectory Monte Carlo simulations of low energy electron transport neglect the quantum nature of electrons; however, at sub-1 keV energies quantum effects have the potential to become significant. This work compares quantum and classical simulations within a simplified model of electron transport in water. Electron transport is modeled in water droplets using quantum mechanical (QM) and classical trajectory Monte Carlo (MC) methods. Water droplets are modeled as collections of point scatterers representing water molecules from which electrons may be isotropically scattered. The role of inelastic scattering is investigated by introducing absorption. QM calculations involve numerically solving a system of coupled equations for the electron wavefield incident on each scatterer. A minimum distance between scatterers is introduced to approximate structured water. The average QM water droplet incoherent cross section is compared with the MC cross section; a relative error (RE) on the MC results is computed. RE varies with electron energy, average and minimum distances between scatterers, and scattering amplitude. The mean free path is generally the relevant length scale for estimating RE. The introduction of a minimum distance between scatterers increases RE substantially (factors of 5 to 10), suggesting that the structure of water must be modeled for accurate simulations. Inelastic scattering does not improve agreement between QM and MC simulations: for the same magnitude of elastic scattering, the introduction of inelastic scattering increases RE. Droplet cross sections are sensitive to droplet size and shape; considerable variations in RE are observed with changing droplet size and shape. At sub-1 keV energies, quantum effects may become non-negligible for electron transport in condensed media. Electron transport is strongly affected by the structure of the medium. Inelastic scatter does not improve agreement between QM and MC simulations of low energy electron transport in condensed media. © 2012 American Association of Physicists in Medicine.

  2. Graph distance for complex networks

    NASA Astrophysics Data System (ADS)

    Shimada, Yutaka; Hirata, Yoshito; Ikeguchi, Tohru; Aihara, Kazuyuki

    2016-10-01

    Networks are widely used as a tool for describing diverse real complex systems and have been successfully applied to many fields. The distance between networks is one of the most fundamental concepts for properly classifying real networks, detecting temporal changes in network structures, and effectively predicting their temporal evolution. However, this distance has rarely been discussed in the theory of complex networks. Here, we propose a graph distance between networks based on a Laplacian matrix that reflects the structural and dynamical properties of networked dynamical systems. Our results indicate that the Laplacian-based graph distance effectively quantifies the structural difference between complex networks. We further show that our approach successfully elucidates the temporal properties underlying temporal networks observed in the context of face-to-face human interactions.

  3. Building-up of a DNA barcode library for true bugs (insecta: hemiptera: heteroptera) of Germany reveals taxonomic uncertainties and surprises.

    PubMed

    Raupach, Michael J; Hendrich, Lars; Küchler, Stefan M; Deister, Fabian; Morinière, Jérome; Gossner, Martin M

    2014-01-01

    During the last few years, DNA barcoding has become an efficient method for the identification of species. In the case of insects, most published DNA barcoding studies focus on species of the Ephemeroptera, Trichoptera, Hymenoptera and especially Lepidoptera. In this study we test the efficiency of DNA barcoding for true bugs (Hemiptera: Heteroptera), an ecological and economical highly important as well as morphologically diverse insect taxon. As part of our study we analyzed DNA barcodes for 1742 specimens of 457 species, comprising 39 families of the Heteroptera. We found low nucleotide distances with a minimum pairwise K2P distance <2.2% within 21 species pairs (39 species). For ten of these species pairs (18 species), minimum pairwise distances were zero. In contrast to this, deep intraspecific sequence divergences with maximum pairwise distances >2.2% were detected for 16 traditionally recognized and valid species. With a successful identification rate of 91.5% (418 species) our study emphasizes the use of DNA barcodes for the identification of true bugs and represents an important step in building-up a comprehensive barcode library for true bugs in Germany and Central Europe as well. Our study also highlights the urgent necessity of taxonomic revisions for various taxa of the Heteroptera, with a special focus on various species of the Miridae. In this context we found evidence for on-going hybridization events within various taxonomically challenging genera (e.g. Nabis Latreille, 1802 (Nabidae), Lygus Hahn, 1833 (Miridae), Phytocoris Fallén, 1814 (Miridae)) as well as the putative existence of cryptic species (e.g. Aneurus avenius (Duffour, 1833) (Aradidae) or Orius niger (Wolff, 1811) (Anthocoridae)).

  4. Building-Up of a DNA Barcode Library for True Bugs (Insecta: Hemiptera: Heteroptera) of Germany Reveals Taxonomic Uncertainties and Surprises

    PubMed Central

    Raupach, Michael J.; Hendrich, Lars; Küchler, Stefan M.; Deister, Fabian; Morinière, Jérome; Gossner, Martin M.

    2014-01-01

    During the last few years, DNA barcoding has become an efficient method for the identification of species. In the case of insects, most published DNA barcoding studies focus on species of the Ephemeroptera, Trichoptera, Hymenoptera and especially Lepidoptera. In this study we test the efficiency of DNA barcoding for true bugs (Hemiptera: Heteroptera), an ecological and economical highly important as well as morphologically diverse insect taxon. As part of our study we analyzed DNA barcodes for 1742 specimens of 457 species, comprising 39 families of the Heteroptera. We found low nucleotide distances with a minimum pairwise K2P distance <2.2% within 21 species pairs (39 species). For ten of these species pairs (18 species), minimum pairwise distances were zero. In contrast to this, deep intraspecific sequence divergences with maximum pairwise distances >2.2% were detected for 16 traditionally recognized and valid species. With a successful identification rate of 91.5% (418 species) our study emphasizes the use of DNA barcodes for the identification of true bugs and represents an important step in building-up a comprehensive barcode library for true bugs in Germany and Central Europe as well. Our study also highlights the urgent necessity of taxonomic revisions for various taxa of the Heteroptera, with a special focus on various species of the Miridae. In this context we found evidence for on-going hybridization events within various taxonomically challenging genera (e.g. Nabis Latreille, 1802 (Nabidae), Lygus Hahn, 1833 (Miridae), Phytocoris Fallén, 1814 (Miridae)) as well as the putative existence of cryptic species (e.g. Aneurus avenius (Duffour, 1833) (Aradidae) or Orius niger (Wolff, 1811) (Anthocoridae)). PMID:25203616

  5. Orientation-dependent potential of mean force for protein folding

    NASA Astrophysics Data System (ADS)

    Mukherjee, Arnab; Bhimalapuram, Prabhakar; Bagchi, Biman

    2005-07-01

    We present a solvent-implicit minimalistic model potential among the amino acid residues of proteins, obtained by using the known native structures [deposited in the Protein Data Bank (PDB)]. In this model, the amino acid side chains are represented by a single ellipsoidal site, defined by the group of atoms about the center of mass of the side chain. These ellipsoidal sites interact with other sites through an orientation-dependent interaction potential which we construct in the following fashion. First, the site-site potential of mean force (PMF) between heavy atoms is calculated [following F. Melo and E. Feytsman, J. Mol. Biol. 267, 207 (1997)] from statistics of their distance separation obtained from crystal structures. These site-site potentials are then used to calculate the distance and the orientation-dependent potential between side chains of all the amino acid residues (AAR). The distance and orientation dependencies show several interesting results. For example, we find that the PMF between two hydrophobic AARs, such as phenylalanine, is strongly attractive at short distances (after the obvious repulsive region at very short separation) and is characterized by a deep minimum, for specific orientations. For the interaction between two hydrophilic AARs, such a deep minimum is absent and in addition, the potential interestingly reveals the combined effect of polar (charge) and hydrophobic interactions among some of these AARs. The effectiveness of our potential has been tested by calculating the Z-scores for a large set of proteins. The calculated Z-scores show high negative values for most of them, signifying the success of the potential to identify the native structure from among a large number of its decoy states.

  6. Influence of Gap Distance on Vacuum Arc Characteristics of Cup Type AMF Electrode in Vacuum Interrupters

    NASA Astrophysics Data System (ADS)

    Cheng, Shaoyong; Xiu, Shixin; Wang, Jimei; Shen, Zhengchao

    2006-11-01

    The greenhouse effect of SF6 is a great concern today. The development of high voltage vacuum circuit breakers becomes more important. The vacuum circuit breaker has minimum pollution to the environment. The vacuum interrupter is the key part of a vacuum circuit breaker. The interrupting characteristics in vacuum and arc-controlling technique are the main problems to be solved for a longer gap distance in developing high voltage vacuum interrupters. To understand the vacuum arc characteristics and provide effective technique to control vacuum arc in a long gap distance, the arc mode transition of a cup-type axial magnetic field electrode is observed by a high-speed charge coupled device (CCD) video camera under different gap distances while the arc voltage and arc current are recorded. The controlling ability of the axial magnetic field on vacuum arc obviously decreases when the gap distance is longer than 40 mm. The noise components and mean value of the arc voltage significantly increase. The effective method for controlling the vacuum arc characteristics is provided by long gap distances based on the test results. The test results can be used as a reference to develop high voltage and large capacity vacuum interrupters.

  7. Potential Energy Curves and Transport Properties for the Interaction of He with Other Ground-state Atoms

    NASA Technical Reports Server (NTRS)

    Partridge, Harry; Stallcop, James R.; Levin, Eugene; Arnold, Jim (Technical Monitor)

    2001-01-01

    The interactions of a He atom with a heavier atom are examined for 26 different elements, which are consecutive members selected from three rows (Li - Ne, Na - Ar, and K,Ca, Ga - Kr) and column 12 (Zn,Cd) of the periodic table. Interaction energies are determined wing high-quality ab initio calculations for the states of the molecule that would be formed from each pair of atoms in their ground states. Potential energies are tabulated for a broad range of Interatomic separation distances. The results show, for example, that the energy of an alkali interaction at small separations is nearly the same as that of a rare-gas interaction with the same electron configuration for the dosed shells. Furthermore, the repulsive-range parameter for this region is very short compared to its length for the repulsion dominated by the alkali-valence electron at large separations (beyond about 3-4 a(sub 0)). The potential energies in the region of the van der Waals minimum agree well with the most accurate results available. The ab initio energies are applied to calculate scattering cross sections and obtain the collision integrals that are needed to determine transport properties to second order. The theoretical values of Li-He total scattering cross sections and the rare-gas atom-He transport properties agree well (to within about 1%) with the corresponding measured data. Effective potential energies are constructed from the ab initio energies; the results have been shown to reproduce known transport data and can be readily applied to predict unknown transport properties for like-atom interactions.

  8. Volcano spacing and plate rigidity

    USGS Publications Warehouse

    ten Brink, Uri S.

    1991-01-01

    In-plane stresses, which accompany the flexural deformation of the lithosphere under the load of adjacent volcanoes, may govern the spacing of volcanoes in hotspot provinces. Specifically, compressive stresses in the vicinity of a volcano prevent new upwelling in this area, forcing a new volcano to develop at a minimum distance that is equal to the distance in which the radial stresses change from compressional to tensile (the inflection point). If a volcano is modeled as a point load on a thin elastic plate, then the distance to the inflection point is proportional to the thickness of the plate to the power of 3/4. Compilation of volcano spacing in seven volcanic groups in East Africa and seven volcanic groups of oceanic hotspots shows significant correlation with the elastic thickness of the plate and matches the calculated distance to the inflection point. In contrast, volcano spacing in island arcs and over subduction zones is fairly uniform and is much larger than predicted by the distance to the inflection point, reflecting differences in the geometry of the source and the upwelling areas.

  9. New method for distance-based close following safety indicator.

    PubMed

    Sharizli, A A; Rahizar, R; Karim, M R; Saifizul, A A

    2015-01-01

    The increase in the number of fatalities caused by road accidents involving heavy vehicles every year has raised the level of concern and awareness on road safety in developing countries like Malaysia. Changes in the vehicle dynamic characteristics such as gross vehicle weight, travel speed, and vehicle classification will affect a heavy vehicle's braking performance and its ability to stop safely in emergency situations. As such, the aim of this study is to establish a more realistic new distance-based safety indicator called the minimum safe distance gap (MSDG), which incorporates vehicle classification (VC), speed, and gross vehicle weight (GVW). Commercial multibody dynamics simulation software was used to generate braking distance data for various heavy vehicle classes under various loads and speeds. By applying nonlinear regression analysis to the simulation results, a mathematical expression of MSDG has been established. The results show that MSDG is dynamically changed according to GVW, VC, and speed. It is envisaged that this new distance-based safety indicator would provide a more realistic depiction of the real traffic situation for safety analysis.

  10. Viterbi equalization for long-distance, high-speed underwater laser communication

    NASA Astrophysics Data System (ADS)

    Hu, Siqi; Mi, Le; Zhou, Tianhua; Chen, Weibiao

    2017-07-01

    In long-distance, high-speed underwater laser communication, because of the strong absorption and scattering processes, the laser pulse is stretched with the increase in communication distance and the decrease in water clarity. The maximum communication bandwidth is limited by laser-pulse stretching. Improving the communication rate increases the intersymbol interference (ISI). To reduce the effect of ISI, the Viterbi equalization (VE) algorithm is used to estimate the maximum-likelihood receiving sequence. The Monte Carlo method is used to simulate the stretching of the received laser pulse and the maximum communication rate at a wavelength of 532 nm in Jerlov IB and Jerlov II water channels with communication distances of 80, 100, and 130 m, respectively. The high-data rate communication performance for the VE and hard-decision algorithms is compared. The simulation results show that the VE algorithm can be used to reduce the ISI by selecting the minimum error path. The trade-off between the high-data rate communication performance and minor bit-error rate performance loss makes VE a promising option for applications in long-distance, high-speed underwater laser communication systems.

  11. A binary linear programming formulation of the graph edit distance.

    PubMed

    Justice, Derek; Hero, Alfred

    2006-08-01

    A binary linear programming formulation of the graph edit distance for unweighted, undirected graphs with vertex attributes is derived and applied to a graph recognition problem. A general formulation for editing graphs is used to derive a graph edit distance that is proven to be a metric, provided the cost function for individual edit operations is a metric. Then, a binary linear program is developed for computing this graph edit distance, and polynomial time methods for determining upper and lower bounds on the solution of the binary program are derived by applying solution methods for standard linear programming and the assignment problem. A recognition problem of comparing a sample input graph to a database of known prototype graphs in the context of a chemical information system is presented as an application of the new method. The costs associated with various edit operations are chosen by using a minimum normalized variance criterion applied to pairwise distances between nearest neighbors in the database of prototypes. The new metric is shown to perform quite well in comparison to existing metrics when applied to a database of chemical graphs.

  12. Note on the directional properties of meter-scale gravity waves

    NASA Astrophysics Data System (ADS)

    Peureux, Charles; Benetazzo, Alvise; Ardhuin, Fabrice

    2018-01-01

    The directional distribution of the energy of young waves is bimodal for frequencies above twice the peak frequency; i.e., their directional distribution exhibits two peaks in different directions and a minimum between. Here we analyze in detail a typical case measured with a peak frequency fp = 0.18 Hz and a wind speed of 10.7 m s-1 using a stereo-video system. This technique allows for the separation of free waves from the spectrum of the sea-surface elevation. The latter indeed tend to reduce the contrast between the two peaks and the background. The directional distribution for a given wavenumber is nearly symmetric, with the angle distance between the two peaks growing with frequency, reaching 150° at 35 times the peak wavenumber kp and increasing up to 45 kp. When considering only free waves, the lobe ratio, the ratio of oblique peak energy density over energy in the wind direction, increases linearly with the non-dimensional wavenumber k/kp, up to a value of 6 at k/kp ≃ 22, and possibly more for shorter components. These observations extend to shorter components' previous measurements, and have important consequences for wave properties sensitive to the directional distribution, such as surface slopes, Stokes drift or microseism sources.

  13. Properties of jets measured from tracks in proton-proton collisions at center-of-mass energy s = 7 TeV with the ATLAS detector

    DOE PAGES

    Aad, G.; Abbott, B.; Abdallah, J.; ...

    2011-09-20

    Jets are identified and their properties studied in center-of-mass energy √s = 7 TeV proton-proton collisions at the Large Hadron Collider using charged particles measured by the ATLAS inner detector. Events are selected using a minimum bias trigger, allowing jets at very low transverse momentum to be observed and their characteristics in the transition to high-momentum fully perturbative jets to be studied. Jets are reconstructed using the anti-k t algorithm applied to charged particles with two radius parameter choices, 0.4 and 0.6. An inclusive charged jet transverse momentum cross section measurement from 4 GeV to 100 GeV is shown formore » four ranges in rapidity extending to 1.9 and corrected to charged particle-level truth jets. The transverse momenta and longitudinal momentum fractions of charged particles within jets are measured, along with the charged particle multiplicity and the particle density as a function of radial distance from the jet axis. Comparison of the data with the theoretical models implemented in existing tunings of Monte Carlo event generators indicates reasonable overall agreement between data and Monte Carlo. In conclusion, these comparisons are sensitive to Monte Carlo parton showering, hadronization, and soft physics models.« less

  14. Energetic particle penetrations into the inner magnetosphere

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Ejiri, M.; Hoffman, R.A.; Smith, P.H.

    Data from Explorer 45 (S/sup 3/- A) instruments have revealed characteristics of magnetospheric storm or substorm time energetic particle enhancements in the inner magnetosphere (L< or approx. =5). The properties of the ion 'nose' structure in the dusk hemisphere are examined in detail. A statistical study of the local time dependence of noses places the highest probability of occurrence around 2000 MLT, but hey can be observed even near the noon meridian. It also appears that most noses are not isolated events but will appear on successive passes. A geoelectric field enhancement corresponding to a minimum value of AE ofmore » about 205 ..gamma.. seems to be required to convect the particles within the apogee of Explorer 45. The dynamical behavior of the nose characteristics observed along successive orbits is then explained quantitatively by the time-dependent convection theory in a Volland-Stern type geoelectric field (..gamma..=2). These calculations of adiabatic charged particle motions are also applied to expalin the energy spectra and dispersion in penetration distances for both electrons and ions observed in the postmidnight to morning hours. Finally, useful descriptions are given of the dispersion properties of particles penetrating the inter magnetosphere at all local times as a function of time after a sudden enhancement of the geoelectric field.« less

  15. Ion conduction mechanisms and thermal properties of hydrated and anhydrous phosphoric acids studied with 1H, 2H, and 31P NMR.

    PubMed

    Aihara, Yuichi; Sonai, Atsuo; Hattori, Mineyuki; Hayamizu, Kikuko

    2006-12-14

    To understand the behaviors of phosphoric acids in fuel cells, the ion conduction mechanisms of phosphoric acids in condensed states without free water and in a monomer state with water were studied by measuring the ionic conductivity (sigma) using AC impedance, thermal properties, and self-diffusion coefficients (D) and spin-lattice relaxation times (T1) with multinuclear NMR. The self-diffusion coefficient of the protons (H+ or H3O+), H2O, and H located around the phosphate were always larger than the diffusion coefficients of the phosphates and the disparity increased with increasing phosphate concentration. The diffusion coefficients of the samples containing D2O paralleled those in the protonated samples. Since the 1H NMR T1 values exhibited a minimum with temperature, it was possible to determine the correlation times and they were found to be of nanosecond order for a distance of nanometer order for a flip. The agreement of the ionic conductivities measured directly and those calculated from the diffusion coefficients indicates that the ion conduction obeys the Nernst-Einstein equation in the condensed phosphoric acids. The proton diffusion plays a dominant role in the ion conduction, especially in the condensed phosphoric acids.

  16. Solar wind and coronal structure near sunspot minimum - Pioneer and SMM observations from 1985-1987

    NASA Technical Reports Server (NTRS)

    Mihalov, J. D.; Barnes, A.; Hundhausen, A. J.; Smith, E. J.

    1990-01-01

    Changes in solar wind speed and magnetic polarity observed at the Pioneer spacecraft are discussed here in terms of the changing magnetic geometry implied by SMM coronagraph observations over the period 1985-1987. The pattern of recurrent solar wind streams, the long-term average speed, and the sector polarity of the interplanetary magnetic field all changed in a manner suggesting both a temporal variation, and a changing dependence on heliographic latitude. Coronal observations during this epoch show a systematic variation in coronal structure and the magnetic structure imposed on the expanding solar wind. These observations suggest interpretation of the solar wind speed variations in terms of the familiar model where the speed increases with distance from a nearly flat interplanetary current sheet, and where this current sheet becomes aligned with the solar equatorial plane as sunspot minimum approaches, but deviates rapidly from that orientation after minimum.

  17. 36 CFR 13.550 - Wildlife distance conditions.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Wildlife distance conditions. 13.550 Section 13.550 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR NATIONAL PARK SYSTEM UNITS IN ALASKA Special Regulations-Alagnak Wild River § 13.550 Wildlife...

  18. 36 CFR 13.550 - Wildlife distance conditions.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 36 Parks, Forests, and Public Property 1 2013-07-01 2013-07-01 false Wildlife distance conditions. 13.550 Section 13.550 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR NATIONAL PARK SYSTEM UNITS IN ALASKA Special Regulations-Alagnak Wild River § 13.550 Wildlife...

  19. 36 CFR 13.550 - Wildlife distance conditions.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 36 Parks, Forests, and Public Property 1 2012-07-01 2012-07-01 false Wildlife distance conditions. 13.550 Section 13.550 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR NATIONAL PARK SYSTEM UNITS IN ALASKA Special Regulations-Alagnak Wild River § 13.550 Wildlife...

  20. 36 CFR 13.550 - Wildlife distance conditions.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 36 Parks, Forests, and Public Property 1 2011-07-01 2011-07-01 false Wildlife distance conditions. 13.550 Section 13.550 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR NATIONAL PARK SYSTEM UNITS IN ALASKA Special Regulations-Alagnak Wild River § 13.550 Wildlife...

  1. 36 CFR 13.550 - Wildlife distance conditions.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 36 Parks, Forests, and Public Property 1 2014-07-01 2014-07-01 false Wildlife distance conditions. 13.550 Section 13.550 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR NATIONAL PARK SYSTEM UNITS IN ALASKA Special Regulations-Alagnak Wild River § 13.550 Wildlife...

  2. Influences of the separation distance, ship speed and channel dimension on ship maneuverability in a confined waterway

    NASA Astrophysics Data System (ADS)

    Du, Peng; Ouahsine, Abdellatif; Sergent, Philippe

    2018-05-01

    Ship maneuvering in the confined inland waterway is investigated using the system-based method, where a nonlinear transient hydrodynamic model is adopted and confinement models are implemented to account for the influence of the channel bank and bottom. The maneuvering model is validated using the turning circle test, and the confinement model is validated using the experimental data. The separation distance, ship speed, and channel width are then varied to investigate their influences on ship maneuverability. With smaller separation distances and higher speeds near the bank, the ship's trajectory deviates more from the original course and the bow is repelled with a larger yaw angle, which increase the difficulty of maneuvering. Smaller channel widths induce higher advancing resistances on the ship. The minimum distance to the bank are extracted and studied. It is suggested to navigate the ship in the middle of the channel and with a reasonable speed in the restricted waterway.

  3. The applicability of ordinary least squares to consistently short distances between taxa in phylogenetic tree construction and the normal distribution test consequences.

    PubMed

    Roux, C Z

    2009-05-01

    Short phylogenetic distances between taxa occur, for example, in studies on ribosomal RNA-genes with slow substitution rates. For consistently short distances, it is proved that in the completely singular limit of the covariance matrix ordinary least squares (OLS) estimates are minimum variance or best linear unbiased (BLU) estimates of phylogenetic tree branch lengths. Although OLS estimates are in this situation equal to generalized least squares (GLS) estimates, the GLS chi-square likelihood ratio test will be inapplicable as it is associated with zero degrees of freedom. Consequently, an OLS normal distribution test or an analogous bootstrap approach will provide optimal branch length tests of significance for consistently short phylogenetic distances. As the asymptotic covariances between branch lengths will be equal to zero, it follows that the product rule can be used in tree evaluation to calculate an approximate simultaneous confidence probability that all interior branches are positive.

  4. GROUND CLEARANCE INDICATOR

    DOEpatents

    Skinner, L.V.

    1959-09-29

    A narrow-band frequency-modulated distance measuring system is described. Reflected wave energy is fed into a mixer circuit together with a direct wave energy portion from the transmitter. These two input signals are out of phase by an amount proportional to the distance. Two band pass filter s select two different frequency components (both multiples of transmitter modulation frequency) from the beat frequency. These component frequencies are rectified and their voltage values, which are representative of those frequencies, are compared. It has been found that these voltages will have equal values producing a null output only when an object attains a preselected distance. The null output may be utilized to operate a normally closed relay, for example. At other ranges the voltage comparison will yield a voltage sufficient to keep the relay energized. Ranges may be changed by varying the degree of modulation of the transmitter carrier frequency. A particular advantage of this system lies in its high degree of accuracy throughout a range of distances approaching zero as a minimum.

  5. Notes on specifications for French airplane competitions

    NASA Technical Reports Server (NTRS)

    Margoulis, W

    1920-01-01

    Given here are the rules officially adopted by the Aeronautical Commission of the Aero Club of France for a flight competition to be held in France in 1920 at the Villacoublay Aerodrome. The prize will be awarded to the pilot who succeeds in obtaining the highest maximum and lowest minimum speeds, and in landing within the shortest distance.

  6. Clonal growth and fine-scale genetic structure in tanoak (Notholithocarpus densiflorus: Fagaceae)

    Treesearch

    Richard S. Dodd; Wasima Mayer; Alejandro Nettel; Zara Afzal-Rafii

    2013-01-01

    The combination of sprouting and reproduction by seed can have important consequences on fine-scale spatial distribution of genetic structure (SGS). SGS is an important consideration for species’ restoration because it determines the minimum distance among seed trees to maximize genetic diversity while not prejudicing locally adapted genotypes. Local environmental...

  7. 46 CFR 194.10-20 - Magazine chest construction.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... lid shall have a minimum thickness of 1/8 inch. (b) Permanent sun shields shall be provided for sides... distance of 11/2 inches. Sun shields may be omitted when chests are installed “on deck protected,” shielded from direct exposure to the sun. (c) Chests shall be limited to a gross capacity of 100 cubic feet. (d...

  8. 46 CFR 194.10-20 - Magazine chest construction.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... lid shall have a minimum thickness of 1/8 inch. (b) Permanent sun shields shall be provided for sides... distance of 11/2 inches. Sun shields may be omitted when chests are installed “on deck protected,” shielded from direct exposure to the sun. (c) Chests shall be limited to a gross capacity of 100 cubic feet. (d...

  9. 46 CFR 194.10-20 - Magazine chest construction.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... lid shall have a minimum thickness of 1/8 inch. (b) Permanent sun shields shall be provided for sides... distance of 11/2 inches. Sun shields may be omitted when chests are installed “on deck protected,” shielded from direct exposure to the sun. (c) Chests shall be limited to a gross capacity of 100 cubic feet. (d...

  10. 46 CFR 194.10-20 - Magazine chest construction.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... lid shall have a minimum thickness of 1/8 inch. (b) Permanent sun shields shall be provided for sides... distance of 11/2 inches. Sun shields may be omitted when chests are installed “on deck protected,” shielded from direct exposure to the sun. (c) Chests shall be limited to a gross capacity of 100 cubic feet. (d...

  11. 46 CFR 194.10-20 - Magazine chest construction.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... lid shall have a minimum thickness of 1/8 inch. (b) Permanent sun shields shall be provided for sides... distance of 11/2 inches. Sun shields may be omitted when chests are installed “on deck protected,” shielded from direct exposure to the sun. (c) Chests shall be limited to a gross capacity of 100 cubic feet. (d...

  12. One-time pad, complexity of verification of keys, and practical security of quantum cryptography

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Molotkov, S. N., E-mail: sergei.molotkov@gmail.com

    2016-11-15

    A direct relation between the complexity of the complete verification of keys, which is one of the main criteria of security in classical systems, and a trace distance used in quantum cryptography is demonstrated. Bounds for the minimum and maximum numbers of verification steps required to determine the actual key are obtained.

  13. 27 CFR 555.206 - Location of magazines.

    Code of Federal Regulations, 2010 CFR

    2010-04-01

    ... in the table of distances for storage of explosive materials in § 555.218. (2) Ammonium nitrate and... for the separation of ammonium nitrate and blasting agents in § 555.220. However, the minimum... materials in § 555.218. [T.D. ATF-87, 46 FR 40384, Aug. 7, 1981, as amended by T.D. ATF-293, 55 FR 3722, Feb...

  14. Electromagnetic immunity of infusion pumps to GSM mobile phones: a systematic review.

    PubMed

    Calcagnini, Giovanni; Censi, Federica; Triventi, Michele; Mattei, Eugenio; Bartolini, Pietro

    2007-01-01

    Electromagnetic interference with life-sustaining medical care devices has been reported by various groups. Previous studies have demonstrated that volumetric and syringe pumps are susceptible to false alarm buzzing and blocking, when exposed to various electromagnetic sources. The risk of electromagnetic interference depends on several factors such as the phone-emitted power, distance and carrier frequency, phone model and antenna type. The main recommendations and the relevant harmonized standard are also reported and discussed. >From the data available in literature emerges that, for distances lower than 1 m there is a non negligible risk of electromagnetic interferences, although significant differences exists in the reported minimum distances. Interference effects clinically relevant for the patients are rare. No permanent damage to the pumps has been ever reported, although in several cases intervention of personnel is required to resume normal operation.

  15. Distance Domination Number of Graphs Resulting from Edge Comb Product

    NASA Astrophysics Data System (ADS)

    Slamin; Dafik; Angger Waspodo, Gembong

    2018-05-01

    Let G be a simple, finite and connected graph with a vertex-set V (G) and an edge-set E(G). For an integer 1 ≤ k ≤ diam (G), a distance k-dominating set of a connected graph G is a set S of vertices of G such that every vertex of V (G)\\S is at distance at most k from some vertex of S. The k-domination number of G, denoted by γk (G), is the minimum cardinality of a k-dominating set of G. In this paper, we determine the exact value of k-domination number of graphs resulting from an edge comb product of two graphs G 1 and G 2, where G 1 is a wheel, a friendship graph, or a triangular book and G 2 is a cycle.

  16. High Performance Automatic Character Skinning Based on Projection Distance

    NASA Astrophysics Data System (ADS)

    Li, Jun; Lin, Feng; Liu, Xiuling; Wang, Hongrui

    2018-03-01

    Skeleton-driven-deformation methods have been commonly used in the character deformations. The process of painting skin weights for character deformation is a long-winded task requiring manual tweaking. We present a novel method to calculate skinning weights automatically from 3D human geometric model and corresponding skeleton. The method first, groups each mesh vertex of 3D human model to a skeleton bone by the minimum distance from a mesh vertex to each bone. Secondly, calculates each vertex's weights to the adjacent bones by the vertex's projection point distance to the bone joints. Our method's output can not only be applied to any kind of skeleton-driven deformation, but also to motion capture driven (mocap-driven) deformation. Experiments results show that our method not only has strong generality and robustness, but also has high performance.

  17. A fast multipole method combined with a reaction field for long-range electrostatics in molecular dynamics simulations: The effects of truncation on the properties of water

    NASA Astrophysics Data System (ADS)

    Mathias, Gerald; Egwolf, Bernhard; Nonella, Marco; Tavan, Paul

    2003-06-01

    We present a combination of the structure adapted multipole method with a reaction field (RF) correction for the efficient evaluation of electrostatic interactions in molecular dynamics simulations under periodic boundary conditions. The algorithm switches from an explicit electrostatics evaluation to a continuum description at the maximal distance that is consistent with the minimum image convention, and, thus, avoids the use of a periodic electrostatic potential. A physically motivated switching function enables charge clusters interacting with a given charge to smoothly move into the solvent continuum by passing through the spherical dielectric boundary surrounding this charge. This transition is complete as soon as the cluster has reached the so-called truncation radius Rc. The algorithm is used to examine the dependence of thermodynamic properties and correlation functions on Rc in the three point transferable intermolecular potential water model. Our test simulations on pure liquid water used either the RF correction or a straight cutoff and values of Rc ranging from 14 Å to 40 Å. In the RF setting, the thermodynamic properties and the correlation functions show convergence for Rc increasing towards 40 Å. In the straight cutoff case no such convergence is found. Here, in particular, the dipole-dipole correlation functions become completely artificial. The RF description of the long-range electrostatics is verified by comparison with the results of a particle-mesh Ewald simulation at identical conditions.

  18. Association of supermarket characteristics with the body mass index of their shoppers

    PubMed Central

    2013-01-01

    Background Research on the built food environment and weight status has mostly focused on the presence/absence of food outlets while ignoring their internal features or where residents actually shop. We explored associations of distance travelled to supermarkets and supermarket characteristics with shoppers’ body mass index (BMI). Methods Shoppers (n=555) of five supermarkets situated in different income areas in the city were surveyed for food shopping habits, demographics, home postal code, height and weight. Associations of minimum distance to a supermarket (along road network, objectively measured using ArcGIS), its size, food variety and food basket price with shoppers’ BMI were investigated. The ‘food basket’ was defined as the mixture of several food items commonly consumed by residents and available in all supermarkets. Results Supermarkets ranged in total floor space (7500–135 000 square feet) and had similar varieties of fruits, vegetables and cereals. The majority of participants shopped at the surveyed supermarket more than once per week (mean range 1.2 ± 0.8 to 2.3 ± 2.1 times per week across the five supermarkets, p < 0.001), and identified it as their primary store for food (52% overall). Mean participant BMI of the five supermarkets ranged from 23.7 ± 4.3 kg/m2 to 27.1 ± 4.3 kg/m2 (p < 0.001). Median minimum distance from the shoppers’ residence to the supermarket they shopped at ranged from 0.96 (0.57, 2.31) km to 4.30 (2.83, 5.75) km (p < 0.001). A negative association was found between food basket price and BMI. There were no associations between BMI and minimum distance to the supermarket, or other supermarket characteristics. After adjusting for age, sex, dissemination area median individual income and car ownership, BMI of individuals who shopped at Store 1 and Store 2, the supermarkets with lowest price of the ‘food basket’, was 3.66 kg/m2 and 3.73 kg/m2 higher compared to their counterparts who shopped at the supermarket where the ‘food basket’ price was highest (p < 0.001). Conclusions The food basket price in supermarkets was inversely associated with BMI of their shoppers. Our results suggest that careful manipulation of food prices may be used as an intervention for decreasing BMI. PMID:23941309

  19. Association of supermarket characteristics with the body mass index of their shoppers.

    PubMed

    Lear, Scott A; Gasevic, Danijela; Schuurman, Nadine

    2013-08-13

    Research on the built food environment and weight status has mostly focused on the presence/absence of food outlets while ignoring their internal features or where residents actually shop. We explored associations of distance travelled to supermarkets and supermarket characteristics with shoppers' body mass index (BMI). Shoppers (n=555) of five supermarkets situated in different income areas in the city were surveyed for food shopping habits, demographics, home postal code, height and weight. Associations of minimum distance to a supermarket (along road network, objectively measured using ArcGIS), its size, food variety and food basket price with shoppers' BMI were investigated. The 'food basket' was defined as the mixture of several food items commonly consumed by residents and available in all supermarkets. Supermarkets ranged in total floor space (7500-135,000 square feet) and had similar varieties of fruits, vegetables and cereals. The majority of participants shopped at the surveyed supermarket more than once per week (mean range 1.2 ± 0.8 to 2.3 ± 2.1 times per week across the five supermarkets, p < 0.001), and identified it as their primary store for food (52% overall). Mean participant BMI of the five supermarkets ranged from 23.7 ± 4.3 kg/m² to 27.1 ± 4.3 kg/m² (p < 0.001). Median minimum distance from the shoppers' residence to the supermarket they shopped at ranged from 0.96 (0.57, 2.31) km to 4.30 (2.83, 5.75) km (p < 0.001). A negative association was found between food basket price and BMI. There were no associations between BMI and minimum distance to the supermarket, or other supermarket characteristics. After adjusting for age, sex, dissemination area median individual income and car ownership, BMI of individuals who shopped at Store 1 and Store 2, the supermarkets with lowest price of the 'food basket', was 3.66 kg/m² and 3.73 kg/m² higher compared to their counterparts who shopped at the supermarket where the 'food basket' price was highest (p < 0.001). The food basket price in supermarkets was inversely associated with BMI of their shoppers. Our results suggest that careful manipulation of food prices may be used as an intervention for decreasing BMI.

  20. 41 CFR 101-25.301 - General.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... which shall be applied by all executive agencies. Additional criteria above these minimum standards shall be established by each executive agency, limiting its property to the minimum requirements necessary for the efficient functioning of the particular office concerned. This subpart does not apply to...

  1. A minimum distance estimation approach to the two-sample location-scale problem.

    PubMed

    Zhang, Zhiyi; Yu, Qiqing

    2002-09-01

    As reported by Kalbfleisch and Prentice (1980), the generalized Wilcoxon test fails to detect a difference between the lifetime distributions of the male and female mice died from Thymic Leukemia. This failure is a result of the test's inability to detect a distributional difference when a location shift and a scale change exist simultaneously. In this article, we propose an estimator based on the minimization of an average distance between two independent quantile processes under a location-scale model. Large sample inference on the proposed estimator, with possible right-censorship, is discussed. The mouse leukemia data are used as an example for illustration purpose.

  2. Nuclear Fusion Rate Study of a Muonic Molecule via Nuclear Threshold Resonances

    NASA Astrophysics Data System (ADS)

    Faghihi, F.; Eskandari, M. R.

    This work follows our previous calculations of the ground state binding energy, size, and the effective nuclear charge of the muonic T3 molecule, using the Born-Oppenheimer adiabatic approximation. In our past articles, we showed that the system possesses two minimum positions, the first one at the muonic distance and the second at the atomic distance. Also, the symmetric planner vibrational model assumed between the two minima and the approximated potential were calculated. Following from the previous studies, we now calculate the fusion rate of the T3 muonic molecule according to the overlap integral of the resonance nuclear compound nucleus and the molecular wave functions.

  3. 40 CFR 30.31 - Insurance coverage.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 30.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  4. 40 CFR 30.31 - Insurance coverage.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 30.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  5. 32 CFR 32.31 - Insurance coverage.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 32.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  6. 32 CFR 32.31 - Insurance coverage.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 32.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  7. 32 CFR 32.31 - Insurance coverage.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 32.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  8. 38 CFR 49.31 - Insurance coverage.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 49.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  9. 38 CFR 49.31 - Insurance coverage.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 49.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  10. 40 CFR 30.31 - Insurance coverage.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 30.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  11. 32 CFR 32.31 - Insurance coverage.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 32.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  12. 40 CFR 30.31 - Insurance coverage.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 30.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  13. 38 CFR 49.31 - Insurance coverage.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 49.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  14. 38 CFR 49.31 - Insurance coverage.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 49.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  15. 32 CFR 32.31 - Insurance coverage.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 32.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  16. 38 CFR 49.31 - Insurance coverage.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 49.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  17. 40 CFR 30.31 - Insurance coverage.

    Code of Federal Regulations, 2010 CFR

    2010-07-01

    ... NON-PROFIT ORGANIZATIONS Post-Award Requirements Property Standards § 30.31 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment...

  18. 48 CFR 2945.105 - Records of Government property.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... 48 Federal Acquisition Regulations System 7 2010-10-01 2010-10-01 false Records of Government... MANAGEMENT GOVERNMENT PROPERTY General 2945.105 Records of Government property. Contracting officers must maintain a file on any Government-furnished property (GFP) in the possession of contractors. As a minimum...

  19. 48 CFR 2945.105 - Records of Government property.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... 48 Federal Acquisition Regulations System 7 2011-10-01 2011-10-01 false Records of Government... MANAGEMENT GOVERNMENT PROPERTY General 2945.105 Records of Government property. Contracting officers must maintain a file on any Government-furnished property (GFP) in the possession of contractors. As a minimum...

  20. 48 CFR 2945.105 - Records of Government property.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... 48 Federal Acquisition Regulations System 7 2012-10-01 2012-10-01 false Records of Government... MANAGEMENT GOVERNMENT PROPERTY General 2945.105 Records of Government property. Contracting officers must maintain a file on any Government-furnished property (GFP) in the possession of contractors. As a minimum...

  1. Toward Measuring Galactic Dense Molecular Gas Properties and 3D Distribution with Hi-GAL

    NASA Astrophysics Data System (ADS)

    Zetterlund, Erika; Glenn, Jason; Maloney, Phil

    2016-01-01

    The Herschel Space Observatory's submillimeter dust continuum survey Hi-GAL provides a powerful new dataset for characterizing the structure of the dense interstellar medium of the Milky Way. Hi-GAL observed a 2° wide strip covering the entire 360° of the Galactic plane in broad bands centered at 70, 160, 250, 350, and 500 μm, with angular resolution ranging from 10 to 40 arcseconds. We are adapting a molecular cloud clump-finding algorithm and a distance probability density function distance-determination method developed for the Bolocam Galactic Plane Survey (BGPS) to the Hi-GAL data. Using these methods we expect to generate a database of 105 cloud clumps, derive distance information for roughly half the clumps, and derive precise distances for approximately 20% of them. With five-color photometry and distances, we will measure the cloud clump properties, such as luminosities, physical sizes, and masses, and construct a three-dimensional map of the Milky Way's dense molecular gas distribution.The cloud clump properties and the dense gas distribution will provide critical ground truths for comparison to theoretical models of molecular cloud structure formation and galaxy evolution models that seek to emulate spiral galaxies. For example, such models cannot resolve star formation and use prescriptive recipes, such as converting a fixed fraction of interstellar gas to stars at a specified interstellar medium density threshold. The models should be compared to observed dense molecular gas properties and galactic distributions.As a pilot survey to refine the clump-finding and distance measurement algorithms developed for BGPS, we have identified molecular cloud clumps in six 2° × 2° patches of the Galactic plane, including one in the inner Galaxy along the line of sight through the Molecular Ring and the termination of the Galactic bar and one toward the outer Galaxy. Distances have been derived for the inner Galaxy clumps and compared to Bolocam Galactic Plane Survey results. We present the pilot survey clump catalog, distances, clump properties, and a comparison to BGPS.

  2. Path planning for mobile robot using the novel repulsive force algorithm

    NASA Astrophysics Data System (ADS)

    Sun, Siyue; Yin, Guoqiang; Li, Xueping

    2018-01-01

    A new type of repulsive force algorithm is proposed to solve the problem of local minimum and the target unreachable of the classic Artificial Potential Field (APF) method in this paper. The Gaussian function that is related to the distance between the robot and the target is added to the traditional repulsive force, solving the problem of the goal unreachable with the obstacle nearby; variable coefficient is added to the repulsive force component to resize the repulsive force, which can solve the local minimum problem when the robot, the obstacle and the target point are in the same line. The effectiveness of the algorithm is verified by simulation based on MATLAB and actual mobile robot platform.

  3. 14 CFR 1260.131 - Insurance coverage.

    Code of Federal Regulations, 2010 CFR

    2010-01-01

    ... Higher Education, Hospitals, and Other Non-Profit Organizations Property Standards § 1260.131 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and...

  4. 14 CFR 1260.131 - Insurance coverage.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Higher Education, Hospitals, and Other Non-Profit Organizations Property Standards § 1260.131 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and...

  5. 14 CFR 1260.131 - Insurance coverage.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Higher Education, Hospitals, and Other Non-Profit Organizations Property Standards § 1260.131 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and...

  6. 14 CFR 1260.131 - Insurance coverage.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... Higher Education, Hospitals, and Other Non-Profit Organizations Property Standards § 1260.131 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and...

  7. PHAZR: A phenomenological code for holeboring in air

    NASA Astrophysics Data System (ADS)

    Picone, J. M.; Boris, J. P.; Lampe, M.; Kailasanath, K.

    1985-09-01

    This report describes a new code for studying holeboring by a charged particle beam, laser, or electric discharge in a gas. The coordinates which parameterize the channel are radial displacement (r) from the channel axis and distance (z) along the channel axis from the energy source. The code is primarily phenomenological that is, we use closed solutions of simple models in order to represent many of the effects which are important in holeboring. The numerical simplicity which we gain from the use of these solutions enables us to estimate the structure of channel over long propagation distances while using a minimum of computer time. This feature makes PHAZR a useful code for those studying and designing future systems. Of particular interest is the design and implementation of the subgrid turbulence model required to compute the enhanced channel cooling caused by asymmetry-driven turbulence. The approximate equations of Boris and Picone form the basis of the model which includes the effects of turbulent diffusion and fluid transport on the turbulent field itself as well as on the channel parameters. The primary emphasis here is on charged particle beams, and as an example, we present typical results for an ETA-like beam propagating in air. These calculations demonstrate how PHAZAR may be used to investigate accelerator parameter space and to isolate the important physical parameters which determine the holeboring properties of a given system. The comparison with two-dimensional calculations provide a calibration of the subgrid turbulence model.

  8. The Compatibility of Friedmann Cosmological Models with Observed Properties of Gamma-Ray Bursts and a Large Hubble Constant

    NASA Technical Reports Server (NTRS)

    Horack, John M.; Koshut, Thomas M.; Mallozzi, Robert S.; Emslie, A. Gordon; Meegan, Charles A.

    1996-01-01

    The distance scale to cosmic gamma-ray bursts (GRB's) is still uncertain by many orders of magnitude; however, one viable scenario places GRB's at cosmological distances, thereby permitting them to be used as tracers of the cosmological expansion over a significant range of redshifts zeta. Also, several recent measurements of the Hubble constant H(sub 0) appearing in the referred literature report values of 70-80 km/s /Mpc. Although there is significant debate regarding these measurements, we proceed here under the assumption that they are evidence of a large value for H(sub 0). This is done in order to investigate the additional constraints on cosmological models that can be obtained under this hypothesis when combined with the age of the universe and the brightness distribution of cosmological gamma-ray bursts. We show that the range of cosmological models that can be consistent with the GRB brightness distribution, a Hubble constant of 70-80 km/s/Mpc, and a minimum age of the universe of 13-15 Gyr is constrained significantly, largely independent of a wide range of assumptions regarding the evolutionary nature of the burst population. Low-density, Lambda greater than 0 cosmological models with deceleration parameter in the range -1 less than q(sub 0) less than 0 and density parameter sigma(sub 0) in the range approximately equals 0.10-0.25(Omega(sub 0) approximately equals 0.2-0.5) are strongly favored.

  9. The global surface temperatures of the Moon as measured by the Diviner Lunar Radiometer Experiment

    NASA Astrophysics Data System (ADS)

    Williams, J.-P.; Paige, D. A.; Greenhagen, B. T.; Sefton-Nash, E.

    2017-02-01

    The Diviner Lunar Radiometer Experiment onboard the Lunar Reconnaissance Orbiter (LRO) has been acquiring solar reflectance and mid-infrared radiance measurements nearly continuously since July of 2009. Diviner is providing the most comprehensive view of how regoliths on airless bodies store and exchange thermal energy with the space environment. Approximately a quarter trillion calibrated radiance measurements of the Moon, acquired over 5.5 years by Diviner, have been compiled into a 0.5° resolution global dataset with a 0.25 h local time resolution. Maps generated with this dataset provide a global perspective of the surface energy balance of the Moon and reveal the complex and extreme nature of the lunar surface thermal environment. Our achievable map resolution, both spatially and temporally, will continue to improve with further data acquisition. Daytime maximum temperatures are sensitive to the albedo of the surface and are ∼387-397 K at the equator, dropping to ∼95 K just before sunrise, though anomalously warm areas characterized by high rock abundances can be > 50 K warmer than the zonal average nighttime temperatures. An asymmetry is observed between the morning and afternoon temperatures due to the thermal inertia of the lunar regolith with the dusk terminator ∼30 K warmer than the dawn terminator at the equator. An increase in albedo with incidence angle is required to explain the observed decrease in temperatures with latitude. At incidence angles exceeding ∼40°, topography and surface roughness influence temperatures resulting in increasing scatter in temperatures and anisothermality between Diviner channels. Nighttime temperatures are sensitive to the thermophysical properties of the regolith. High thermal inertia (TI) materials such as large rocks, remain warmer during the long lunar night and result in anomalously warm nighttime temperatures and anisothermality in the Diviner channels. Anomalous maximum and minimum temperatures are highlighted by subtracting the zonal mean temperatures from maps. Terrains can be characterized as low or high reflectance and low or high TI. Low maximum temperatures result from high reflectance surfaces while low minimum temperatures from low-TI material. Conversely, high maximum temperatures result from dark surface, and high minimum temperatures from high-TI materials. Impact craters are found to modify regolith properties over large distances. The thermal signature of Tycho is asymmetric, consistent with an oblique impact coming from the west. Some prominent crater rays are visible in the thermal data and require material with a higher thermal inertial than nominal regolith. The influence of the formation of the Orientale basin on the regolith properties is observable over a substantial portion of the western hemisphere despite its age (∼3.8 Gyr), and may have contributed to mixing of highland and mare material on the southwest margin of Oceanus Procellarum where the gradient in radiative properties at the mare-highland contact is broad (∼200 km).

  10. Mapping Atmospheric Moisture Climatologies across the Conterminous United States

    PubMed Central

    Daly, Christopher; Smith, Joseph I.; Olson, Keith V.

    2015-01-01

    Spatial climate datasets of 1981–2010 long-term mean monthly average dew point and minimum and maximum vapor pressure deficit were developed for the conterminous United States at 30-arcsec (~800m) resolution. Interpolation of long-term averages (twelve monthly values per variable) was performed using PRISM (Parameter-elevation Relationships on Independent Slopes Model). Surface stations available for analysis numbered only 4,000 for dew point and 3,500 for vapor pressure deficit, compared to 16,000 for previously-developed grids of 1981–2010 long-term mean monthly minimum and maximum temperature. Therefore, a form of Climatologically-Aided Interpolation (CAI) was used, in which the 1981–2010 temperature grids were used as predictor grids. For each grid cell, PRISM calculated a local regression function between the interpolated climate variable and the predictor grid. Nearby stations entering the regression were assigned weights based on the physiographic similarity of the station to the grid cell that included the effects of distance, elevation, coastal proximity, vertical atmospheric layer, and topographic position. Interpolation uncertainties were estimated using cross-validation exercises. Given that CAI interpolation was used, a new method was developed to allow uncertainties in predictor grids to be accounted for in estimating the total interpolation error. Local land use/land cover properties had noticeable effects on the spatial patterns of atmospheric moisture content and deficit. An example of this was relatively high dew points and low vapor pressure deficits at stations located in or near irrigated fields. The new grids, in combination with existing temperature grids, enable the user to derive a full suite of atmospheric moisture variables, such as minimum and maximum relative humidity, vapor pressure, and dew point depression, with accompanying assumptions. All of these grids are available online at http://prism.oregonstate.edu, and include 800-m and 4-km resolution data, images, metadata, pedigree information, and station inventory files. PMID:26485026

  11. The dynamical properties of a Rydberg hydrogen atom between two parallel metal surfaces

    NASA Astrophysics Data System (ADS)

    Liu, Wei; Li, Hong-Yun; Yang, Shan-Ying; Lin, Sheng-Lu

    2011-03-01

    This paper presents the dynamical properties of a Rydberg hydrogen atom between two metal surfaces using phase space analysis methods. The dynamical behaviour of the excited hydrogen atom depends sensitively on the atom—surface distance d. There exists a critical atom—surface distance dc = 1586 a.u. When the atom—surface distance d is larger than the critical distance dc, the image charge potential is less important than the Coulomb potential, the system is near-integrable and the electron motion is regular. As the distance d decreases, the system will tend to be non-integrable and unstable, and the electron might be captured by the metal surfaces. Project supported by the National Natural Science Foundation of China (Grant No. 10774093) and the Natural Science Foundation of Shandong Province (Grant No. ZR2009FZ006).

  12. Examination of the Atomic Pair Distribution Function (PDF) of SiC Nanocrystals by In-situ High Pressure Diffraction

    NASA Technical Reports Server (NTRS)

    Grzanka, E.; Stelmakh, S.; Gierlotka, S.; Zhao, Y.; Palosz, B.; Palosz, W.

    2003-01-01

    Key properties of nanocrystals are determined by their real atomic structure, therefore a reasonable understanding and meaningful interpretation of their properties requires a realistic model of the structure. In this paper we present an evidence of a complex response of the lattice distances to external pressure indicating a presence of a complex structure of Sic nanopowders. The experiments were performed on nanocrystalline Sic subjected to hydrostatic or isostatic pressure using synchrotron and neutron powder diffraction. Elastic properties of the samples were examined based on X-ray diffraction data using a Diamond Anvil Cell (DAC) in HASYLAB at DESY. The dependence'of the lattice parameters and of the Bragg reflections width with pressure exhibits a ha1 nature of the properties (compressibilities) of the powders and indicates a complex structure of the grains. We interpreted tws behaviour as originating from different elastic properties of the grain interior and surface. Analysis of the dependence of individual interatomic distances on pressure was based on in-situ neutron diffraction measurements done with HbD diffractometer at LANSCE in Los Alamos National Laboratory with the Paris-Edinburgh cell under pressures up to 8 GPa (Qmax = 26/A). Interatomic distances were obtained by PDF analysis using the PDFgetN program. We have found that the interatomic distances undergo a complex, non-monotonic changes. Even under substantial pressures a considerable relaxation of the lattice may take place: some interatomic distances increase with an increase in pressure. We relate this phenomenon to: (1), changes of the microstructure of the densified material, in particular breaking of its fractal chain structure and, (2), its complex structure resembling that of a material composed of two phases, each with its distinct elastic properties.

  13. 14 CFR § 1260.131 - Insurance coverage.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Higher Education, Hospitals, and Other Non-Profit Organizations Property Standards § 1260.131 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and...

  14. Changes in stereoacuity following implantable Collamer lens implantation in patients with myopia

    PubMed Central

    Khokhar, Sudarshan; Gupta, Shikha; Gogia, Varun; Tewari, Ruchir; Agarwal, Tushar

    2015-01-01

    The study evaluated the impact of implantable Collamer lens (ICL) implantation on stereoacuity in myopes in a retrospective case series. Ninety-five eyes of 48 patients were recruited. Distance and near stereoacuity were measured using distance Randot stereotest and TNO test, respectively, before surgery and at 4 weeks postoperatively. Mean age of the patients was 23.67 ± 3.7 years. Mean uncorrected distance visual acuity (UDVA) was 1.28 ± 0.37 logarithm of the minimum angle of resolution (logMAR) (median: 1.3; range: 0.3–1.8), and median best-corrected distance visual acuity (BDVA) was 0.18 logMAR (range: 0–0.6). There was a significant improvement in both UDVA and BDVA postsurgery (P < 0.001; Wilcoxon signed rank test). The overall improvement in stereopsis was observed in 15/48 (31.25%) and 13/48 (27.10%) subjects for near and distance, respectively, with no significant difference between the two (P = 0.82; Fisher's exact test). Among stereoblind individuals, the odd's ratio for near stereoacuity to improve in comparison to distance stereoacuity was 8.85 (95% confidence interval: 1.68–46.70; P = 0.01). ICL implantation for refractive correction aided stereoacuity improvement in myopes more so for near. PMID:26655005

  15. 7 CFR 201.76 - Minimum Land, Isolation, Field, and Seed Standards.

    Code of Federal Regulations, 2013 CFR

    2013-01-01

    ... receptive silks in the seed parent at the time the contaminant is shedding pollen. In addition, dent sterile... distance is 410 feet (124.97m) and may be modified by the planting of pollen parent border rows according... plants in the pollen parent that have shed pollen or to the off-type plants in the see parent at the time...

  16. 7 CFR 201.76 - Minimum Land, Isolation, Field, and Seed Standards.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... receptive silks in the seed parent at the time the contaminant is shedding pollen. In addition, dent sterile... distance is 410 feet (124.97m) and may be modified by the planting of pollen parent border rows according... plants in the pollen parent that have shed pollen or to the off-type plants in the see parent at the time...

  17. 7 CFR 201.76 - Minimum Land, Isolation, Field, and Seed Standards.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... receptive silks in the seed parent at the time the contaminant is shedding pollen. In addition, dent sterile... distance is 410 feet (124.97m) and may be modified by the planting of pollen parent border rows according... plants in the pollen parent that have shed pollen or to the off-type plants in the see parent at the time...

  18. The Sequence of Hip and Selected Upper-Extremity Joint Movements During the Golf Drive.

    ERIC Educational Resources Information Center

    Hunter, Charles L.

    This study analyzed wrist, elbow, and hip actions of golfers who were accurately driving a golf ball a maximum distance. Electrogoniometry and cinematography were used to measure wrist, forearm, elbow, and hip actions during the downswing of 10 low-handicap golfers who were attempting to drive a minimum of 225 yards within a 50-yard corridor.…

  19. 76 FR 30254 - Certifications and Exemptions Under the International Regulations for Preventing Collisions at...

    Federal Register 2010, 2011, 2012, 2013, 2014

    2011-05-25

    ... functions. List of Subjects in 32 CFR Part 706 Marine safety, Navigation (water), and Vessels. For the... Distance in meters of forward masthead light below minimum Vessel Number required height. Sec. 2(a)(i... meters meters; rule meters; 2(K) in meters 2(K) 3(b) annex 1 21(c) annex 1 annex 1 * * * * * * * USS...

  20. 29 CFR 1926.1408 - Power line safety (up to 350 kV)-equipment operations.

    Code of Federal Regulations, 2013 CFR

    2013-07-01

    ... 29 Labor 8 2013-07-01 2013-07-01 false Power line safety (up to 350 kV)-equipment operations. 1926... Derricks in Construction § 1926.1408 Power line safety (up to 350 kV)—equipment operations. (a) Hazard... for use and conditions of use. Table A—Minimum Clearance Distances Voltage(nominal, kV, alternating...

  1. 29 CFR 1926.1408 - Power line safety (up to 350 kV)-equipment operations.

    Code of Federal Regulations, 2012 CFR

    2012-07-01

    ... 29 Labor 8 2012-07-01 2012-07-01 false Power line safety (up to 350 kV)-equipment operations. 1926... Derricks in Construction § 1926.1408 Power line safety (up to 350 kV)—equipment operations. (a) Hazard... for use and conditions of use. Table A—Minimum Clearance Distances Voltage(nominal, kV, alternating...

  2. 29 CFR 1926.1408 - Power line safety (up to 350 kV)-equipment operations.

    Code of Federal Regulations, 2014 CFR

    2014-07-01

    ... 29 Labor 8 2014-07-01 2014-07-01 false Power line safety (up to 350 kV)-equipment operations. 1926... Derricks in Construction § 1926.1408 Power line safety (up to 350 kV)—equipment operations. (a) Hazard... for use and conditions of use. Table A—Minimum Clearance Distances Voltage(nominal, kV, alternating...

  3. 29 CFR 1926.1408 - Power line safety (up to 350 kV)-equipment operations.

    Code of Federal Regulations, 2011 CFR

    2011-07-01

    ... 29 Labor 8 2011-07-01 2011-07-01 false Power line safety (up to 350 kV)-equipment operations. 1926... Derricks in Construction § 1926.1408 Power line safety (up to 350 kV)—equipment operations. (a) Hazard... for use and conditions of use. Table A—Minimum Clearance Distances Voltage(nominal, kV, alternating...

  4. Evolution of the orbit of asteroid 4179 Toutatis over 11,550 years.

    NASA Astrophysics Data System (ADS)

    Zausaev, A. F.; Pushkarev, A. N.

    1994-05-01

    The Everhart method is used to study evolution of the orbit of the asteroid 4179 Toutatis, a member of the Apollo group, over the time period 9300 B.C. to 2250 A.D. Minimum asteroid-Earth distances during the evolution process are calculated. It is shown that the asteroid presents no danger to the Earth over the interval studied.

  5. Internet Access and Usage in Improving Students' Self-Directed Learning in Indonesia Open University

    ERIC Educational Resources Information Center

    Rahardjo, Djoko; Sumardjo; Lubis, Djuara P.; Harijati, Sri Ir.

    2016-01-01

    Internet is well known nowadays, however higher distance education students who live in remote rural areas still have not been able to take advantages of this medium optimally for their learning process. For accessing the internet the students have to be available with the minimum prerequisites: the existence of adequate devices and the sufficient…

  6. 47 CFR 73.207 - Minimum distance separation between stations.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... five pairs of adjacent channels. The five pairs of adjacent channels are the first (200 kHz above and 200 kHz below the channel under consideration), the second (400 kHz above and below), the third (600 k... Separation Requirements in Kilometers (miles) Relation Co-channel 200 kHz 400/600 kHz 10.6/10.8 MHz A to A...

  7. 47 CFR 73.207 - Minimum distance separation between stations.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... five pairs of adjacent channels. The five pairs of adjacent channels are the first (200 kHz above and 200 kHz below the channel under consideration), the second (400 kHz above and below), the third (600 k... Separation Requirements in Kilometers (miles) Relation Co-channel 200 kHz 400/600 kHz 10.6/10.8 MHz A to A...

  8. 47 CFR 73.207 - Minimum distance separation between stations.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... five pairs of adjacent channels. The five pairs of adjacent channels are the first (200 kHz above and 200 kHz below the channel under consideration), the second (400 kHz above and below), the third (600 k... Separation Requirements in Kilometers (miles) Relation Co-channel 200 kHz 400/600 kHz 10.6/10.8 MHz A to A...

  9. Characterization of separability and entanglement in (2xD)- and (3xD)-dimensional systems by single-qubit and single-qutrit unitary transformations

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Giampaolo, Salvatore M.; CNR-INFM Coherentia, Naples; CNISM Unita di Salerno and INFN Sezione di Napoli, Gruppo collegato di Salerno, Baronissi

    2007-10-15

    We investigate the geometric characterization of pure state bipartite entanglement of (2xD)- and (3xD)-dimensional composite quantum systems. To this aim, we analyze the relationship between states and their images under the action of particular classes of local unitary operations. We find that invariance of states under the action of single-qubit and single-qutrit transformations is a necessary and sufficient condition for separability. We demonstrate that in the (2xD)-dimensional case the von Neumann entropy of entanglement is a monotonic function of the minimum squared Euclidean distance between states and their images over the set of single qubit unitary transformations. Moreover, both inmore » the (2xD)- and in the (3xD)-dimensional cases the minimum squared Euclidean distance exactly coincides with the linear entropy [and thus as well with the tangle measure of entanglement in the (2xD)-dimensional case]. These results provide a geometric characterization of entanglement measures originally established in informational frameworks. Consequences and applications of the formalism to quantum critical phenomena in spin systems are discussed.« less

  10. Functional characteristics of the calcium modulated proteins seen from an evolutionary perspective

    NASA Technical Reports Server (NTRS)

    Kretsinger, R. H.; Nakayama, S.; Moncrief, N. D.

    1991-01-01

    We have constructed dendrograms relating 173 EF-hand proteins of known amino acid sequence. We aligned all of these proteins by their EF-hand domains, omitting interdomain regions. Initial dendrograms were computed by minimum mutation distance methods. Using these as starting points, we determined the best dendrogram by the method of maximum parsimony, scored by minimum mutation distance. We identified 14 distinct subfamilies as well as 6 unique proteins that are perhaps the sole representatives of other subfamilies. This information is given in tabular form. Within subfamilies one can easily align interdomain regions. The resulting dendrograms are very similar to those computed using domains only. Dendrograms constructed using pairs of domains show general congruence. However, there are enough exceptions to caution against an overly simple scheme in which one pair of gene duplications leads from one domain precurser to a four domain prototype from which all other forms evolved. The ability to bind calcium was lost and acquired several times during evolution. The distribution of introns does not conform to the dendrogram based on amino acid sequences. The rates of evolution appear to be much slower within subfamilies, especially within calmodulin, than those prior to the definition of subfamily.

  11. Study of budding yeast colony formation and its characterizations by using circular granular cell

    NASA Astrophysics Data System (ADS)

    Aprianti, D.; Haryanto, F.; Purqon, A.; Khotimah, S. N.; Viridi, S.

    2016-03-01

    Budding yeast can exhibit colony formation in solid substrate. The colony of pathogenic budding yeast can colonize various surfaces of the human body and medical devices. Furthermore, it can form biofilm that resists drug effective therapy. The formation of the colony is affected by the interaction between cells and with its growth media. The cell budding pattern holds an important role in colony expansion. To study this colony growth, the molecular dynamic method was chosen to simulate the interaction between budding yeast cells. Every cell was modelled by circular granular cells, which can grow and produce buds. Cohesion force, contact force, and Stokes force govern this model to mimic the interaction between cells and with the growth substrate. Characterization was determined by the maximum (L max) and minimum (L min) distances between two cells within the colony and whether two lines that connect the two cells in the maximum and minimum distances intersect each other. Therefore, it can be recognized the colony shape in circular, oval, and irregular shapes. Simulation resulted that colony formation are mostly in oval shape with little branch. It also shows that greater cohesion strength obtains more compact colony formation.

  12. Anomalous cosmic ray oxygen gradients throughout the heliosphere

    NASA Technical Reports Server (NTRS)

    Cummings, A. C.; Mewaldt, R. A.; Blake, J. B.; Cummings, J. R.; Franz, M.; Hovestadt, D.; Klecker, B.; Mason, G. M.; Mazur, J. E.; Stone, E. C.

    1995-01-01

    We have used data from the Solar, Anomalous, and Magnetospheric Particle Explorer (SAMPEX), Ulysses, Voyager 1, Voyager 2, and Pioneer 10 spacecraft to determine the radial and latitudinal gradients of anomalous cosmic ray oxygen at 10 MeV/nuc during the last half of 1993. These five spacecraft cover radial distances from 1 AU (SAMPEX) to 58 AU (P10) and latitudes to 41 deg S (Ulysses) and 32 deg N (V1). We find that the radial gradient is a decreasing function of radial distance, approximately r(exp -n), with n = 1.7 +/- 0.7. The large-scale radial gradient between the inner and outer heliosphere is much smaller than it was during the last solar minimum period in approximately 1987. The latitudinal gradient is small and positive, 1.3 +/- 0.4 %/deg, as opposed to the large and negative latitudinal gradients found during 1987, but similar to the small positive latitudinal gradient measured during 1976 for anomalous cosmic ray helium. These observations confirm that effects of curvature and gradient drift in the large scale magnetic field of the Sun are important for establishing the three-dimensional intensity distributions of these particles in the heliosphere during periods of solar minimum conditions.

  13. Recognition of the epicardial breakthrough on body surface isopotential maps: influence of the inter-electrode distance on the patterns reflecting the epicardial breakthrough.

    PubMed

    Toyama, J; Tabata, O

    1981-10-01

    The epicardial breakthrough can be recognized from the localized depression of the body surface potential, which is characterized by a localized bend of the equipotential lines or a send-minimum on isopotential maps. Recognition of epicardial breakthrough with isopotential maps enables us to diagnose location of the block site of the bundle branch blocks more precisely than by ECG or VCG. However, the optimum inter-electrode distance for detection of such a localized potential has not been determined. In the present study, influence of the inter-electrode distance on the characteristic patterns reflecting the epicardial breakthrough was studied on 16 healthy persons using 9 x 9 electrode arrays with inter-electrode distance of 1.25 cm, 5 x 5 with 2.5 cm, and 3 x 3 with 5 cm. Breakthrough was recognized in 15 out of 16 cases (94%) on maps recorded with electrode arrays with inter-electrode distance of 1.25 and 2.5 cm. However, detectability of the breakthrough was reduced to 10 out of 16 cases (63%) with electrode array having inter-electrode distance of 5 cm. In conclusion, it is preferable to use an electrode array with an inter-electrode distance of no more than 2.5 cm for the purpose of breakthrough recognition.

  14. Identification and classification of chemicals using terahertz reflective spectroscopic focal-plane imaging system.

    PubMed

    Zhong, Hua; Redo-Sanchez, Albert; Zhang, X-C

    2006-10-02

    We present terahertz (THz) reflective spectroscopic focal-plane imaging of four explosive and bio-chemical materials (2, 4-DNT, Theophylline, RDX and Glutamic Acid) at a standoff imaging distance of 0.4 m. The 2 dimension (2-D) nature of this technique enables a fast acquisition time and is very close to a camera-like operation, compared to the most commonly used point emission-detection and raster scanning configuration. The samples are identified by their absorption peaks extracted from the negative derivative of the reflection coefficient respect to the frequency (-dr/dv) of each pixel. Classification of the samples is achieved by using minimum distance classifier and neural network methods with a rate of accuracy above 80% and a false alarm rate below 8%. This result supports the future application of THz time-domain spectroscopy (TDS) in standoff distance sensing, imaging, and identification.

  15. A novel three-stage distance-based consensus ranking method

    NASA Astrophysics Data System (ADS)

    Aghayi, Nazila; Tavana, Madjid

    2018-05-01

    In this study, we propose a three-stage weighted sum method for identifying the group ranks of alternatives. In the first stage, a rank matrix, similar to the cross-efficiency matrix, is obtained by computing the individual rank position of each alternative based on importance weights. In the second stage, a secondary goal is defined to limit the vector of weights since the vector of weights obtained in the first stage is not unique. Finally, in the third stage, the group rank position of alternatives is obtained based on a distance of individual rank positions. The third stage determines a consensus solution for the group so that the ranks obtained have a minimum distance from the ranks acquired by each alternative in the previous stage. A numerical example is presented to demonstrate the applicability and exhibit the efficacy of the proposed method and algorithms.

  16. Hydrodynamic chromatography of polystyrene microparticles in micropillar array columns.

    PubMed

    Op de Beeck, Jeff; De Malsche, Wim; Vangelooven, Joris; Gardeniers, Han; Desmet, Gert

    2010-09-24

    We report on the possibility to perform HDC in micropillar array columns and the potential advantages of such a system. The HDC performance of a pillar array column with pillar diameter = 5 microm and an interpillar distance of 2.5 microm has been characterized using both a low MW tracer (FITC) and differently sized polystyrene bead samples (100, 200 and 500 nm). The reduced plate height curves that were obtained for the different investigated markers all overlapped very well, and attained a minimum value of about h(min)=0.3 (reduction based on the pillar diameter), corresponding to 1.6 microm in absolute value and giving good prospects for high efficiency separations. The obtained reduced retention time values were in fair agreement with that predicted by the Di Marzio and Guttman model for a flow between flat plates, using the minimal interpillar distance as characteristic interplate distance. Copyright 2010 Elsevier B.V. All rights reserved.

  17. Heat stroke risk for open-water swimmers during long-distance events.

    PubMed

    Macaluso, Filippo; Barone, Rosario; Isaacs, Ashwin W; Farina, Felicia; Morici, Giuseppe; Di Felice, Valentina

    2013-12-01

    Open-water swimming is a rapidly growing sport discipline worldwide, and clinical problems associated with long-distance swimming are now better recognized and managed more effectively. The most prevalent medical risk associated with an open-water swimming event is hypothermia; therefore, the Federation Internationale De Natation (FINA) has instituted 2 rules to reduce this occurrence related to the minimum water temperature and the time taken to complete the race. Another medical risk that is relevant to open-water swimmers is heat stroke, a condition that can easily go unnoticed. The purpose of this review is to shed light on this physiological phenomenon by examining the physiological response of swimmers during long-distance events, to define a maximum water temperature limit for competitions. We conclude that competing in water temperatures exceeding 33°C should be avoided. Copyright © 2013 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

  18. Estimating the probability that the Taser directly causes human ventricular fibrillation.

    PubMed

    Sun, H; Haemmerich, D; Rahko, P S; Webster, J G

    2010-04-01

    This paper describes the first methodology and results for estimating the order of probability for Tasers directly causing human ventricular fibrillation (VF). The probability of an X26 Taser causing human VF was estimated using: (1) current density near the human heart estimated by using 3D finite-element (FE) models; (2) prior data of the maximum dart-to-heart distances that caused VF in pigs; (3) minimum skin-to-heart distances measured in erect humans by echocardiography; and (4) dart landing distribution estimated from police reports. The estimated mean probability of human VF was 0.001 for data from a pig having a chest wall resected to the ribs and 0.000006 for data from a pig with no resection when inserting a blunt probe. The VF probability for a given dart location decreased with the dart-to-heart horizontal distance (radius) on the skin surface.

  19. Clinical Evaluation of Functional Vision of +1.5 Diopters near Addition, Aspheric, Rotational Asymmetric Multifocal Intraocular Lens

    PubMed Central

    Khoramnia, Rahmin; Attia, Mary Safwat; Koss, Michael Janusz; Linz, Katharina; Auffarth, Gerd Uwe

    2016-01-01

    Purpose To evaluate postoperative outcomes and visual performance in intermediate distance after implantation of a +1.5 diopters (D) addition, aspheric, rotational asymmetric multifocal intraocular lens (MIOL). Methods Patients underwent bilateral cataract surgery with implantation of an aspheric, asymmetric MIOL with +1.5 D near addition. A complete ophthalmological examination was performed preoperatively and 3 months postoperatively. The main outcome measures were monocular and binocular uncorrected distance visual acuity (UDVA), corrected distance visual acuity (CDVA), uncorrected intermediate visual acuity (UIVA), distance corrected intermediate visual acuity (DCIVA), uncorrected near visual acuity (UNVA) and distance corrected keratometry, and manifest refraction. The Salzburg Reading Desk was used to analyze unilateral and bilateral functional vision with uncorrected and corrected reading acuity, reading distance, reading speed, and the smallest log-scaled print size that could be read effectively at near and intermediate distances. Results The study comprised 60 eyes of 30 patients (mean age, 68.30 ± 9.26 years; range, 34 to 80 years). There was significant improvement in UDVA and CDVA. Mean UIVA was 0.01 ± 0.09 logarithm of the minimum angle of resolution (logMAR) and mean DCIVA was -0.02 ± 0.11 logMAR. In Salzburg Reading Desk analysis for UIVA, the mean subjective intermediate distance was 67.58 ± 8.59 cm with mean UIVA of -0.02 ± 0.09 logMAR and mean word count of 96.38 ± 28.32 words/min. Conclusions The new aspheric, asymmetric, +1.5 D near addition MIOL offers good results for distance visual function in combination with good performance for intermediate distances and functional results for near distance. PMID:27729759

  20. Clinical Evaluation of Functional Vision of +1.5 Diopters near Addition, Aspheric, Rotational Asymmetric Multifocal Intraocular Lens.

    PubMed

    Kretz, Florian Tobias Alwin; Khoramnia, Rahmin; Attia, Mary Safwat; Koss, Michael Janusz; Linz, Katharina; Auffarth, Gerd Uwe

    2016-10-01

    To evaluate postoperative outcomes and visual performance in intermediate distance after implantation of a +1.5 diopters (D) addition, aspheric, rotational asymmetric multifocal intraocular lens (MIOL). Patients underwent bilateral cataract surgery with implantation of an aspheric, asymmetric MIOL with +1.5 D near addition. A complete ophthalmological examination was performed preoperatively and 3 months postoperatively. The main outcome measures were monocular and binocular uncorrected distance visual acuity (UDVA), corrected distance visual acuity (CDVA), uncorrected intermediate visual acuity (UIVA), distance corrected intermediate visual acuity (DCIVA), uncorrected near visual acuity (UNVA) and distance corrected keratometry, and manifest refraction. The Salzburg Reading Desk was used to analyze unilateral and bilateral functional vision with uncorrected and corrected reading acuity, reading distance, reading speed, and the smallest log-scaled print size that could be read effectively at near and intermediate distances. The study comprised 60 eyes of 30 patients (mean age, 68.30 ± 9.26 years; range, 34 to 80 years). There was significant improvement in UDVA and CDVA. Mean UIVA was 0.01 ± 0.09 logarithm of the minimum angle of resolution (logMAR) and mean DCIVA was -0.02 ± 0.11 logMAR. In Salzburg Reading Desk analysis for UIVA, the mean subjective intermediate distance was 67.58 ± 8.59 cm with mean UIVA of -0.02 ± 0.09 logMAR and mean word count of 96.38 ± 28.32 words/min. The new aspheric, asymmetric, +1.5 D near addition MIOL offers good results for distance visual function in combination with good performance for intermediate distances and functional results for near distance.

  1. Minimum-error quantum distinguishability bounds from matrix monotone functions: A comment on 'Two-sided estimates of minimum-error distinguishability of mixed quantum states via generalized Holevo-Curlander bounds' [J. Math. Phys. 50, 032106 (2009)

    DOE Office of Scientific and Technical Information (OSTI.GOV)

    Tyson, Jon

    2009-06-15

    Matrix monotonicity is used to obtain upper bounds on minimum-error distinguishability of arbitrary ensembles of mixed quantum states. This generalizes one direction of a two-sided bound recently obtained by the author [J. Tyson, J. Math. Phys. 50, 032106 (2009)]. It is shown that the previously obtained special case has unique properties.

  2. Laser rangefinders for autonomous intelligent cruise control systems

    NASA Astrophysics Data System (ADS)

    Journet, Bernard A.; Bazin, Gaelle

    1998-01-01

    THe purpose of this paper is to show to what kind of application laser range-finders can be used inside Autonomous Intelligent Cruise Control systems. Even if laser systems present good performances the safety and technical considerations are very restrictive. As the system is used in the outside, the emitted average output power must respect the rather low level of 1A class. Obstacle detection or collision avoidance require a 200 meters range. Moreover bad weather conditions, like rain or fog, ar disastrous. We have conducted measurements on laser rangefinder using different targets and at different distances. We can infer that except for cooperative targets low power laser rangefinder are not powerful enough for long distance measurement. Radars, like 77 GHz systems, are better adapted to such cases. But in case of short distances measurement, range around 10 meters, with a minimum distance around twenty centimeters, laser rangefinders are really useful with good resolution and rather low cost. Applications can have the following of white lines on the road, the target being easily cooperative, detection of vehicles in the vicinity, that means car convoy traffic control or parking assistance, the target surface being indifferent at short distances.

  3. Human-tracking strategies for a six-legged rescue robot based on distance and view

    NASA Astrophysics Data System (ADS)

    Pan, Yang; Gao, Feng; Qi, Chenkun; Chai, Xun

    2016-03-01

    Human tracking is an important issue for intelligent robotic control and can be used in many scenarios, such as robotic services and human-robot cooperation. Most of current human-tracking methods are targeted for mobile/tracked robots, but few of them can be used for legged robots. Two novel human-tracking strategies, view priority strategy and distance priority strategy, are proposed specially for legged robots, which enable them to track humans in various complex terrains. View priority strategy focuses on keeping humans in its view angle arrange with priority, while its counterpart, distance priority strategy, focuses on keeping human at a reasonable distance with priority. To evaluate these strategies, two indexes(average and minimum tracking capability) are defined. With the help of these indexes, the view priority strategy shows advantages compared with distance priority strategy. The optimization is done in terms of these indexes, which let the robot has maximum tracking capability. The simulation results show that the robot can track humans with different curves like square, circular, sine and screw paths. Two novel control strategies are proposed which specially concerning legged robot characteristics to solve human tracking problems more efficiently in rescue circumstances.

  4. 49 CFR 192.245 - Repair or removal of defects.

    Code of Federal Regulations, 2013 CFR

    2013-10-01

    ... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192... be preheated if conditions exist which would adversely affect the quality of the weld repair. After... minimum mechanical properties specified for the welding procedure used to make the original weld are met...

  5. 49 CFR 192.245 - Repair or removal of defects.

    Code of Federal Regulations, 2011 CFR

    2011-10-01

    ... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192... be preheated if conditions exist which would adversely affect the quality of the weld repair. After... minimum mechanical properties specified for the welding procedure used to make the original weld are met...

  6. 49 CFR 192.245 - Repair or removal of defects.

    Code of Federal Regulations, 2014 CFR

    2014-10-01

    ... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192... be preheated if conditions exist which would adversely affect the quality of the weld repair. After... minimum mechanical properties specified for the welding procedure used to make the original weld are met...

  7. 49 CFR 192.245 - Repair or removal of defects.

    Code of Federal Regulations, 2012 CFR

    2012-10-01

    ... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192... be preheated if conditions exist which would adversely affect the quality of the weld repair. After... minimum mechanical properties specified for the welding procedure used to make the original weld are met...

  8. 49 CFR 192.245 - Repair or removal of defects.

    Code of Federal Regulations, 2010 CFR

    2010-10-01

    ... NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192... be preheated if conditions exist which would adversely affect the quality of the weld repair. After... minimum mechanical properties specified for the welding procedure used to make the original weld are met...

  9. Optical–Mid-infrared Period–Luminosity Relations for W UMa-type Contact Binaries Based on Gaia DR 1: 8% Distance Accuracy

    NASA Astrophysics Data System (ADS)

    Chen, Xiaodian; Deng, Licai; de Grijs, Richard; Wang, Shu; Feng, Yuting

    2018-06-01

    W Ursa Majoris (W UMa)-type contact binary systems (CBs) are useful statistical distance indicators because of their large numbers. Here, we establish (orbital) period–luminosity relations (PLRs) in 12 optical to mid-infrared bands (GBVRIJHK s W1W2W3W4) based on 183 nearby W UMa-type CBs with accurate Tycho–Gaia parallaxes. The 1σ dispersion of the PLRs decreases from optical to near- and mid-infrared wavelengths. The minimum scatter, 0.16 mag, implies that W UMa-type CBs can be used to recover distances to 7% precision. Applying our newly determined PLRs to 19 open clusters containing W UMa-type CBs demonstrates that the PLR and open cluster CB distance scales are mutually consistent to within 1%. Adopting our PLRs as secondary distance indicators, we compiled a catalog of 55,603 CB candidates, of which 80% have distance estimates based on a combination of optical, near-infrared, and mid-infrared photometry. Using Fourier decomposition, 27,318 high-probability W UMa-type CBs were selected. The resulting 8% distance accuracy implies that our sample encompasses the largest number of objects with accurate distances within a local volume with a radius of 3 kpc available to date. The distribution of W UMa-type CBs in the Galaxy suggests that in different environments, the CB luminosity function may be different: larger numbers of brighter (longer-period) W UMa-type CBs are found in younger environments.

  10. Site-to-Source Finite Fault Distance Probability Distribution in Probabilistic Seismic Hazard and the Relationship Between Minimum Distances

    NASA Astrophysics Data System (ADS)

    Ortega, R.; Gutierrez, E.; Carciumaru, D. D.; Huesca-Perez, E.

    2017-12-01

    We present a method to compute the conditional and no-conditional probability density function (PDF) of the finite fault distance distribution (FFDD). Two cases are described: lines and areas. The case of lines has a simple analytical solution while, in the case of areas, the geometrical probability of a fault based on the strike, dip, and fault segment vertices is obtained using the projection of spheres in a piecewise rectangular surface. The cumulative distribution is computed by measuring the projection of a sphere of radius r in an effective area using an algorithm that estimates the area of a circle within a rectangle. In addition, we introduce the finite fault distance metrics. This distance is the distance where the maximum stress release occurs within the fault plane and generates a peak ground motion. Later, we can apply the appropriate ground motion prediction equations (GMPE) for PSHA. The conditional probability of distance given magnitude is also presented using different scaling laws. A simple model of constant distribution of the centroid at the geometrical mean is discussed, in this model hazard is reduced at the edges because the effective size is reduced. Nowadays there is a trend of using extended source distances in PSHA, however it is not possible to separate the fault geometry from the GMPE. With this new approach, it is possible to add fault rupture models separating geometrical and propagation effects.

  11. Distance biases in the estimation of the physical properties of Hi-GAL compact sources - I. Clump properties and the identification of high-mass star-forming candidates

    NASA Astrophysics Data System (ADS)

    Baldeschi, Adriano; Elia, D.; Molinari, S.; Pezzuto, S.; Schisano, E.; Gatti, M.; Serra, A.; Merello, M.; Benedettini, M.; Di Giorgio, A. M.; Liu, J. S.

    2017-04-01

    The degradation of spatial resolution in star-forming regions, observed at large distances (d ≳ 1 kpc) with Herschel, can lead to estimates of the physical parameters of the detected compact sources (clumps), which do not necessarily mirror the properties of the original population of cores. This paper aims at quantifying the bias introduced in the estimation of these parameters by the distance effect. To do so, we consider Herschel maps of nearby star-forming regions taken from the Herschel Gould Belt survey, and simulate the effect of increased distance to understand what amount of information is lost when a distant star-forming region is observed with Herschel resolution. In the maps displaced to different distances we extract compact sources, and we derive their physical parameters as if they were original Herschel infrared Galactic Plane Survey maps of the extracted source samples. In this way, we are able to discuss how the main physical properties change with distance. In particular, we discuss the ability of clumps to form massive stars: we estimate the fraction of distant sources that are classified as high-mass stars-forming objects due to their position in the mass versus radius diagram, that are only 'false positives'. We also give a threshold for high-mass star formation M>1282 (r/ [pc])^{1.42} M_{⊙}. In conclusion, this paper provides the astronomer dealing with Herschel maps of distant star-forming regions with a set of prescriptions to partially recover the character of the core population in unresolved clumps.

  12. Results on the spatial resolution of repetitive transcranial magnetic stimulation for cortical language mapping during object naming in healthy subjects.

    PubMed

    Sollmann, Nico; Hauck, Theresa; Tussis, Lorena; Ille, Sebastian; Maurer, Stefanie; Boeckh-Behrens, Tobias; Ringel, Florian; Meyer, Bernhard; Krieg, Sandro M

    2016-10-24

    The spatial resolution of repetitive navigated transcranial magnetic stimulation (rTMS) for language mapping is largely unknown. Thus, to determine a minimum spatial resolution of rTMS for language mapping, we evaluated the mapping sessions derived from 19 healthy volunteers for cortical hotspots of no-response errors. Then, the distances between hotspots (stimulation points with a high error rate) and adjacent mapping points (stimulation points with low error rates) were evaluated. Mean distance values of 13.8 ± 6.4 mm (from hotspots to ventral points, range 0.7-30.7 mm), 10.8 ± 4.8 mm (from hotspots to dorsal points, range 2.0-26.5 mm), 16.6 ± 4.8 mm (from hotspots to apical points, range 0.9-27.5 mm), and 13.8 ± 4.3 mm (from hotspots to caudal points, range 2.0-24.2 mm) were measured. According to the results, the minimum spatial resolution of rTMS should principally allow for the identification of a particular gyrus, and according to the literature, it is in good accordance with the spatial resolution of direct cortical stimulation (DCS). Since measurement was performed between hotspots and adjacent mapping points and not on a finer-grained basis, we only refer to a minimum spatial resolution. Furthermore, refinement of our results within the scope of a prospective study combining rTMS and DCS for resolution measurement during language mapping should be the next step.

  13. The minimum or natural rate of flow and droplet size ejected by Taylor cone-jets: physical symmetries and scaling laws

    NASA Astrophysics Data System (ADS)

    Gañán-Calvo, A. M.; Rebollo-Muñoz, N.; Montanero, J. M.

    2013-03-01

    We aim to establish the scaling laws for both the minimum rate of flow attainable in the steady cone-jet mode of electrospray, and the size of the resulting droplets in that limit. Use is made of a small body of literature on Taylor cone-jets reporting precise measurements of the transported electric current and droplet size as a function of the liquid properties and flow rate. The projection of the data onto an appropriate non-dimensional parameter space maps a region bounded by the minimum rate of flow attainable in the steady state. To explain these experimental results, we propose a theoretical model based on the generalized concept of physical symmetry, stemming from the system time invariance (steadiness). A group of symmetries rising at the cone-to-jet geometrical transition determines the scaling for the minimum flow rate and related variables. If the flow rate is decreased below that minimum value, those symmetries break down, which leads to dripping. We find that the system exhibits two instability mechanisms depending on the nature of the forces arising against the flow: one dominated by viscosity and the other by the liquid polarity. In the former case, full charge relaxation is guaranteed down to the minimum flow rate, while in the latter the instability condition becomes equivalent to the symmetry breakdown by charge relaxation or separation. When cone-jets are formed without artificially imposing a flow rate, a microjet is issued quasi-steadily. The flow rate naturally ejected this way coincides with the minimum flow rate studied here. This natural flow rate determines the minimum droplet size that can be steadily produced by any electrohydrodynamic means for a given set of liquid properties.

  14. Topological Structure of the Space of Phenotypes: The Case of RNA Neutral Networks

    PubMed Central

    Aguirre, Jacobo; Buldú, Javier M.; Stich, Michael; Manrubia, Susanna C.

    2011-01-01

    The evolution and adaptation of molecular populations is constrained by the diversity accessible through mutational processes. RNA is a paradigmatic example of biopolymer where genotype (sequence) and phenotype (approximated by the secondary structure fold) are identified in a single molecule. The extreme redundancy of the genotype-phenotype map leads to large ensembles of RNA sequences that fold into the same secondary structure and can be connected through single-point mutations. These ensembles define neutral networks of phenotypes in sequence space. Here we analyze the topological properties of neutral networks formed by 12-nucleotides RNA sequences, obtained through the exhaustive folding of sequence space. A total of 412 sequences fragments into 645 subnetworks that correspond to 57 different secondary structures. The topological analysis reveals that each subnetwork is far from being random: it has a degree distribution with a well-defined average and a small dispersion, a high clustering coefficient, and an average shortest path between nodes close to its minimum possible value, i.e. the Hamming distance between sequences. RNA neutral networks are assortative due to the correlation in the composition of neighboring sequences, a feature that together with the symmetries inherent to the folding process explains the existence of communities. Several topological relationships can be analytically derived attending to structural restrictions and generic properties of the folding process. The average degree of these phenotypic networks grows logarithmically with their size, such that abundant phenotypes have the additional advantage of being more robust to mutations. This property prevents fragmentation of neutral networks and thus enhances the navigability of sequence space. In summary, RNA neutral networks show unique topological properties, unknown to other networks previously described. PMID:22028856

  15. Chemical graphs, molecular matrices and topological indices in chemoinformatics and quantitative structure-activity relationships.

    PubMed

    Ivanciuc, Ovidiu

    2013-06-01

    Chemical and molecular graphs have fundamental applications in chemoinformatics, quantitative structureproperty relationships (QSPR), quantitative structure-activity relationships (QSAR), virtual screening of chemical libraries, and computational drug design. Chemoinformatics applications of graphs include chemical structure representation and coding, database search and retrieval, and physicochemical property prediction. QSPR, QSAR and virtual screening are based on the structure-property principle, which states that the physicochemical and biological properties of chemical compounds can be predicted from their chemical structure. Such structure-property correlations are usually developed from topological indices and fingerprints computed from the molecular graph and from molecular descriptors computed from the three-dimensional chemical structure. We present here a selection of the most important graph descriptors and topological indices, including molecular matrices, graph spectra, spectral moments, graph polynomials, and vertex topological indices. These graph descriptors are used to define several topological indices based on molecular connectivity, graph distance, reciprocal distance, distance-degree, distance-valency, spectra, polynomials, and information theory concepts. The molecular descriptors and topological indices can be developed with a more general approach, based on molecular graph operators, which define a family of graph indices related by a common formula. Graph descriptors and topological indices for molecules containing heteroatoms and multiple bonds are computed with weighting schemes based on atomic properties, such as the atomic number, covalent radius, or electronegativity. The correlation in QSPR and QSAR models can be improved by optimizing some parameters in the formula of topological indices, as demonstrated for structural descriptors based on atomic connectivity and graph distance.

  16. Estimation of representative elementary volume for DNAPL saturation and DNAPL-water interfacial areas in 2D heterogeneous porous media

    NASA Astrophysics Data System (ADS)

    Wu, Ming; Cheng, Zhou; Wu, Jianfeng; Wu, Jichun

    2017-06-01

    Representative elementary volume (REV) is important to determine properties of porous media and those involved in migration of contaminants especially dense nonaqueous phase liquids (DNAPLs) in subsurface environment. In this study, an experiment of long-term migration of the commonly used DNAPL, perchloroethylene (PCE), is performed in a two dimensional (2D) sandbox where several system variables including porosity, PCE saturation (Soil) and PCE-water interfacial area (AOW) are accurately quantified by light transmission techniques over the entire PCE migration process. Moreover, the REVs for these system variables are estimated by a criterion of relative gradient error (εgi) and results indicate that the frequency of minimum porosity-REV size closely follows a Gaussian distribution in the range of 2.0 mm and 8.0 mm. As experiment proceeds in PCE infiltration process, the frequency and cumulative frequency of both minimum Soil-REV and minimum AOW-REV sizes change their shapes from the irregular and random to the regular and smooth. When experiment comes into redistribution process, the cumulative frequency of minimum Soil-REV size reveals a linear positive correlation, while frequency of minimum AOW-REV size tends to a Gaussian distribution in the range of 2.0 mm-7.0 mm and appears a peak value in 13.0 mm-14.0 mm. Undoubtedly, this study will facilitate the quantification of REVs for materials and fluid properties in a rapid, handy and economical manner, which helps enhance our understanding of porous media and DNAPL properties at micro scale, as well as the accuracy of DNAPL contamination modeling at field-scale.

  17. 2 CFR 200.310 - Insurance coverage.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    .... The non-Federal entity must, at a minimum, provide the equivalent insurance coverage for real property and equipment acquired or improved with Federal funds as provided to property owned by the non-Federal...

  18. Molecular complex of lumiflavin and 2-aminobenzoic acid: crystal structure, crystal spectra, and solution properties.

    PubMed

    Shieh, H S; Ghisla, S; Hanson, L K; Ludwig, M L; Nordman, C E

    1981-08-04

    The molecular complex lumiflavin-2-aminobenzoic acid monohydrate (C13H12N4O2.C7H7NO2.H2O) crystallizes from from aqueous solution as red triclinic prisms. The space group is P1 with cell dimensions a = 9.660 A, b = 14.866 A, c = 7.045 A, alpha = 95.44 degrees , beta = 95.86 degrees, and gamma = 105.66 degrees . The crystal structure was solved by direct methods and refined by block-diagonal least-squares procedures to an R value of 0.050 on the basis of 1338 observed reflections. The structure is composed of stacks of alternating lumiflavin adn un-ionized (neutral) 2-aminobenzoic acid molecules. Two different modes of stacking interaction are observed. In one, 2-aminobenzoic acid overlaps all three of the isoalloxazine rings, at a mean distance of 3.36 A; in the other, 2-aminobenzoic acid interacts distance of 3.36 A; in the other, 2-aminobenzoic acid interacts with the pyrazine and dimethylbenzene moieties, at a distance of 3.42 A. Perpendicular to the stacking direction, the molecules form a continuous sheet. Each flavin is hydrogen bonded via O(2) and NH(3) to two symmetrically related aminobenzoates; the water of crystallization forms three hydrogen bonds, bridging two flavins, via O(4) and N(5), and one aminobenzoic acid. The red color of the crystals results from a charge-transfer transition involving stacked flavin and 2-aminobenzoic acid. The red color of the crystals results from a charge-transfer transition involving stacked flavin and 2-aminobenzoic acid molecules. Measurements of the polarized optical absorption spectra of crystals show that the transition moment direction for the long wavelength absorbance (beyond 530 nm) contains an out-of-plane component which can only arise from a charge-transfer interaction. Since the amino N does not make exceptionally close interactions with isoalloxazine atoms in either stacking mode (minimum interatomic distance 3.52 A), the charge transfer is presumed to involve pi orbitals of the 2-aminobenzoic acid donor.

  19. Electrostatic Interactions Between Glycosaminoglycan Molecules

    NASA Astrophysics Data System (ADS)

    Song, Fan; Moyne, Christian; Bai, Yi-Long

    2005-02-01

    The electrostatic interactions between nearest-neighbouring chondroitin sulfate glycosaminoglycan (CS-GAG) molecular chains are obtained on the bottle brush conformation of proteoglycan aggrecan based on an asymptotic solution of the Poisson-Boltzmann equation the CS-GAGs satisfy under the physiological conditions of articular cartilage. The present results show that the interactions are associated intimately with the minimum separation distance and mutual angle between the molecular chains themselves. Further analysis indicates that the electrostatic interactions are not only expressed to be purely exponential in separation distance and decrease with the increasing mutual angle but also dependent sensitively on the saline concentration in the electrolyte solution within the tissue, which is in agreement with the existed relevant conclusions.

  20. Distance-Based and Low Energy Adaptive Clustering Protocol for Wireless Sensor Networks

    PubMed Central

    Gani, Abdullah; Anisi, Mohammad Hossein; Ab Hamid, Siti Hafizah; Akhunzada, Adnan; Khan, Muhammad Khurram

    2016-01-01

    A wireless sensor network (WSN) comprises small sensor nodes with limited energy capabilities. The power constraints of WSNs necessitate efficient energy utilization to extend the overall network lifetime of these networks. We propose a distance-based and low-energy adaptive clustering (DISCPLN) protocol to streamline the green issue of efficient energy utilization in WSNs. We also enhance our proposed protocol into the multi-hop-DISCPLN protocol to increase the lifetime of the network in terms of high throughput with minimum delay time and packet loss. We also propose the mobile-DISCPLN protocol to maintain the stability of the network. The modelling and comparison of these protocols with their corresponding benchmarks exhibit promising results. PMID:27658194

  1. 10 CFR 603.1010 - Substantive issues.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    .... The scope is an overall vision statement for the project, including a discussion of the project's... minimum required Federal Government rights in intellectual property generated under the award and address... disposition of tangible property. The property provisions for for-profit and nonprofit participants must be in...

  2. 10 CFR 600.131 - Insurance coverage.

    Code of Federal Regulations, 2011 CFR

    2011-01-01

    ... Nonprofit Organizations Post-Award Requirements § 600.131 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment acquired with DOE funds as provided to property owned by the recipient. Federally-owned property need not be insured unless required...

  3. 10 CFR 600.131 - Insurance coverage.

    Code of Federal Regulations, 2014 CFR

    2014-01-01

    ... Nonprofit Organizations Post-Award Requirements § 600.131 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment acquired with DOE funds as provided to property owned by the recipient. Federally-owned property need not be insured unless required...

  4. 10 CFR 600.131 - Insurance coverage.

    Code of Federal Regulations, 2012 CFR

    2012-01-01

    ... Nonprofit Organizations Post-Award Requirements § 600.131 Insurance coverage. Recipients shall, at a minimum, provide the equivalent insurance coverage for real property and equipment acquired with DOE funds as provided to property owned by the recipient. Federally-owned property need not be insured unless required...

  5. How the spontaneous insertion of amphiphilic imidazolium-based cations changes biological membranes: a molecular simulation study.

    PubMed

    Lim, Geraldine S; Jaenicke, Stephan; Klähn, Marco

    2015-11-21

    The insertion of 1-octyl-3-methylimidazolium cations (OMIM(+)) from a diluted aqueous ionic liquid (IL) solution into a model of a bacterial cell membrane is investigated. Subsequently, the mutual interactions of cations inside the membrane and their combined effect on membrane properties are derived. The ionic liquid solution and the membrane model are simulated using molecular dynamics in combination with empirical force fields. A high propensity of OMIM(+) for membrane insertion is observed, with a cation concentration at equilibrium inside the membrane 47 times larger than in the solvent. Once inserted, cations exhibit a weak effective attraction inside the membrane at a distance of 1.3 nm. At this free energy minimum, negatively charged phosphates of the phospholipids are sandwiched between two OMIM(+) to form energetically favorable OMIM(+)-phosphate-OMIM(+) types of coordination. The cation-cation association free energy is 5.9 kJ mol(-1), whereas the activation barrier for dissociation is 10.1 kJ mol(-1). Subsequently, OMIM(+) are inserted into the leaflet of the membrane bilayer that represents the extracellular side. The cations are evenly distributed with mutual cation distances according to the found optimum distance of 1.3 nm. Because of the short length of the cation alkyl chains compared to lipid fatty acids, voids are generated in the hydrophobic core of the membrane. These voids disorder the fatty acids, because they enable fatty acids to curl into these empty spaces and also cause a thinning of the membrane by 0.6 nm. Additionally, the membrane density increases at its center. The presence of OMIM(+) in the membrane facilitates the permeation of small molecules such as ammonia through the membrane, which is chosen as a model case for small polar solutes. The permeability coefficient of the membrane with respect to ammonia increases substantially by a factor of seven. This increase is caused by a reduction of the involved free energy barriers, which is effected by the cations through the thinning of the membrane and favorable interactions of the delocalized OMIM(+) charge with ammonia inside the membrane. Overall, the results indicate the antimicrobial effect of amphiphilic imidazolium-based cations that are found in various common ILs. This effect is caused by an alteration of the permeability of the bacterial membrane and other property changes.

  6. Design and test of a capacitance detection circuit based on a transimpedance amplifier

    NASA Astrophysics Data System (ADS)

    Linfeng, Mu; Wendong, Zhang; Changde, He; Rui, Zhang; Jinlong, Song; Chenyang, Xue

    2015-07-01

    This paper presents a transimpedance amplifier (TIA) capacitance detection circuit aimed at detecting micro-capacitance, which is caused by ultrasonic stimulation applied to the capacitive micro-machined ultrasonic transducer (CMUT). In the capacitance interface, a TIA is adopted to amplify the received signal with a center frequency of 400 kHz, and finally detect ultrasound pressure. The circuit has a strong anti-stray property and this paper also studies the calculation of compensation capacity in detail. To ensure high resolution, noise analysis is conducted. After optimization, the detected minimum ultrasound pressure is 2.1 Pa, which is two orders of magnitude higher than the former. The test results showed that the circuit was sensitive to changes in ultrasound pressure and the distance between the CMUT and stumbling block, which also successfully demonstrates the functionality of the developed TIA of the analog-front-end receiver. Project supported by the National Natural Science Foundation of China (No. 61127008) and the Subsidized Program of the National High Technology Research and Development Program of China (No. 2011AA040404).

  7. Occultation Lightcurves for Selected Pluto Volatile Transport Models

    NASA Astrophysics Data System (ADS)

    Young, L. A.

    2004-11-01

    The stellar occultations by Pluto in 1988 and 2002 are demonstrably sensitive to changes in Pluto's atmosphere near one microbar (Elliot and Young 1992, AJ 103, 991; Elliot et al. 2003, Nature 424, 165; Sicardy 2003, Nature 424, 168). However, Pluto volatile-transport models focus on the changes in the atmospheric pressure at the surface (e.g., Hansen and Paige 1996, Icarus 20, 247; Stansberry and Yelle 1999, Icarus 141, 299). What's lacking is a connection between predictions about the surface properties and either temperature and pressure profiles measurable from stellar occultations, or the occultation light curve morphology itself. Radiative-conductive models can illuminate this connection. I will illustrate how Pluto's changing surface pressure, temperature, and heliocentric distance may affect occultation light curves for a selection of existing volatile transport models. Changes in the light curve include the presence or absence of an observable ``kink'' (or departure from an isothermal light curve), the appearance of non-zero minimum flux levels, and the detectability of the solid surface. These light curves can serve as examples of what we may anticipate during the upcoming Pluto occultation season, as Pluto crosses the galactic plane.

  8. Spatial coherence measurements and x-ray holographic imaging using a laser-generated plasma x-ray source in the water window spectral region

    NASA Astrophysics Data System (ADS)

    Turcu, I. C. E.; Ross, I. N.; Schulz, M. S.; Daido, H.; Tallents, G. J.; Krishnan, J.; Dwivedi, L.; Hening, A.

    1993-06-01

    The properties of a coherent x-ray point source in the water window spectral region generated using a small commercially available KrF laser system focused onto a Mylar (essentially carbon) target have been measured. By operating the source in a low-pressure (approximately 20 Torr) nitrogen environment, the degree of monochromaticity was improved due to the nitrogen acting as an x-ray filter and relatively enhancing the radiation at a wavelength of 3.37 nm (C vi 1s-2p). X-ray pinhole camera images show a minimum source size of 12 μm. A Young's double slit coherence measurement gave fringe visibilities of approximately 62% for a slit separation of 10.5 μm at a distance of 31.7 cm from the source. To demonstrate the viability of the laser plasma as a source for coherent imaging applications a Gabor (in-line) hologram of two carbon fibers, of different sizes, was produced. The exposure time and the repetition rate was 2 min and 10 Hz, respectively.

  9. Does a Local B-Minimum Appear in the Tail Current Sheet During a Substorm Growth Phase?

    NASA Astrophysics Data System (ADS)

    Sergeev, V. A.; Gordeev, E. I.; Merkin, V. G.; Sitnov, M. I.

    2018-03-01

    Magnetic configurations with dBz/dr > 0 in the midtail current sheet are potentially unstable to various instabilities associated with the explosive substorm onset. Their existence is hard to confirm with observations of magnetospheric spacecraft. Here we use remote sensing by low-altitude spacecraft that measured the loss cone filling rate during electron-rich solar particle event, providing information about magnetic properties of the tail current sheet. We found a latitudinally localized anisotropic 30 keV electron loss cone region embedded inside an extended region of isotropic solar electron precipitation. It was persistently observed for more than 0.5 h during isolated growth phase event by six Polar Operational Environmental Satellites spacecraft, which crossed the premidnight auroral oval. The embedded anisotropic region was observed 1° poleward of the outer radiation belt boundary over 4-5 h wide magnetic local time sector, suggesting a persistent ridge-type Bz2/j maximum in the equatorial plasma sheet at distances 15-20 RE. We discuss infrequent observations of such events taking into account recent results of global magnetohydrodynamic simulations.

  10. A Method of Spatial Mapping and Reclassification for High-Spatial-Resolution Remote Sensing Image Classification

    PubMed Central

    Wang, Guizhou; Liu, Jianbo; He, Guojin

    2013-01-01

    This paper presents a new classification method for high-spatial-resolution remote sensing images based on a strategic mechanism of spatial mapping and reclassification. The proposed method includes four steps. First, the multispectral image is classified by a traditional pixel-based classification method (support vector machine). Second, the panchromatic image is subdivided by watershed segmentation. Third, the pixel-based multispectral image classification result is mapped to the panchromatic segmentation result based on a spatial mapping mechanism and the area dominant principle. During the mapping process, an area proportion threshold is set, and the regional property is defined as unclassified if the maximum area proportion does not surpass the threshold. Finally, unclassified regions are reclassified based on spectral information using the minimum distance to mean algorithm. Experimental results show that the classification method for high-spatial-resolution remote sensing images based on the spatial mapping mechanism and reclassification strategy can make use of both panchromatic and multispectral information, integrate the pixel- and object-based classification methods, and improve classification accuracy. PMID:24453808

  11. Uniform-burning matrix burner

    DOEpatents

    Bohn, Mark S.; Anselmo, Mark

    2001-01-01

    Computer simulation was used in the development of an inward-burning, radial matrix gas burner and heat pipe heat exchanger. The burner and exchanger can be used to heat a Stirling engine on cloudy days when a solar dish, the normal source of heat, cannot be used. Geometrical requirements of the application forced the use of the inward burning approach, which presents difficulty in achieving a good flow distribution and air/fuel mixing. The present invention solved the problem by providing a plenum with just the right properties, which include good flow distribution and good air/fuel mixing with minimum residence time. CFD simulations were also used to help design the primary heat exchanger needed for this application which includes a plurality of pins emanating from the heat pipe. The system uses multiple inlet ports, an extended distance from the fuel inlet to the burner matrix, flow divider vanes, and a ring-shaped, porous grid to obtain a high-temperature uniform-heat radial burner. Ideal applications include dish/Stirling engines, steam reforming of hydrocarbons, glass working, and any process requiring high temperature heating of the outside surface of a cylindrical surface.

  12. Influence of Nitrogen Flow Rate on Friction Coefficient and Surface Roughness of TiN Coatings Deposited on Tool Steel Using Arc Method

    NASA Astrophysics Data System (ADS)

    Hamzah, Esah; Ourdjini, Ali; Ali, Mubarak; Akhter, Parvez; Hj. Mohd Toff, Mohd Radzi; Abdul Hamid, Mansor

    In the present study, the effect of various N2 gas flow rates on friction coefficient and surface roughness of TiN-coated D2 tool steel was examined by a commercially available cathodic arc physical vapor deposition (CAPVD) technique. A Pin-on-Disc test was carried out to study the Coefficient of friction (COF) versus sliding distance. A surface roughness tester measured the surface roughness parameters. The minimum values for the COF and surface roughness were recorded at a N2 gas flow rate of 200 sccm. The increase in the COF and surface roughness at a N2 gas flow rate of 100 sccm was mainly attributed to an increase in both size and number of titanium particles, whereas the increase at 300 sccm was attributed to a larger number of growth defects generated during the coating process. These ideas make it possible to optimize the coating properties as a function of N2 gas flow rate for specific applications, e.g. cutting tools for automobiles, aircraft, and various mechanical parts.

  13. Planar waveguide microlenses for nonblocking photonic switches and optical interconnects

    NASA Astrophysics Data System (ADS)

    Glebov, Alexei L.; Huang, Lidu; Lee, Michael; Aoki, Shigenori; Yokouchi, Kishio

    2004-09-01

    Different types of planar waveguide microlenses are fabricated with PLC technologies from a variety of optical materials such as silica, photo-definable epoxy resins, and a number of other optical polymers. Hybrid microlenses are also fabricated in which the base of the lens, with a double concave gap, is formed from silica and the gap is filled with an optical polymer. The optimized lens structures provide the maximum coupling efficiencies between the input and output channels at distances up to 100 mm with a minimum channel pitch of 0.5-0.7 mm. Experimental and theoretical studies provide results on collimation and focusing properties of single and double microlenses made of silica, polymer, and silica/polymer. The evaluation of the temperature and wavelength effects on the collimation characteristics of the lenses demonstrate that the single lenses are more stable and, thus, more suitable for operations under varying conditions. Examples of the planar waveguide microlens applications are presented. In one application the microlens arrays are integrated in fast electrooptic photonic switching modules. In the other application the microlenses are embedded in the backplanes with nonblocking optical interconnects.

  14. Tomodensitometric survey of the distance between thoracic and abdominal vital organs and the wall according to BMI, abdominal diameter and gender: proposition of an indicative chart for the forensic activities.

    PubMed

    Venara, A; Gaudin, A; Lebigot, J; Airagnes, G; Hamel, J F; Jousset, N; Ridereau-Zins, C; Mauillon, D; Rouge-Maillart, C

    2013-06-10

    Forensic doctors are frequently asked by magistrates when dealing principally with knife wounds, about the depth of the blade which may have penetrated the victim's body. Without the use of imaging, it is often difficult to respond to this question, even in an approximate way. Knowledge of the various distances between organs and the skin wall would allow an assessment to be made of the minimum blade length required to obtain the injuries observed. The objective of this study is thus to determine average distances between the vital organs of the thorax and abdomen, and the skin wall, taking into account the person's body mass index (BMI). This is a prospective single-center study, carried out over a 2-month period at University Hospital in Angers. A sample of 200 people was studied. The inclusion criteria were as follows: all patients coming to the radiology department and the emergency department for an abdominal, thoracic or thoraco-abdominal scan with injection. The exclusion criteria included patients presenting a large lymphoma, a large abdominal or retroperitoneal tumor, a tumor in one of the organs targeted by our study and patients presenting ascites. The organs focused on were: the pericardium, pleura, aorta, liver, spleen, kidneys, abdominal aorta and femoral arteries. The shortest distance between the organ and the skin wall was noted. Median distances were calculated according to gender, abdominal diameter and BMI. We associated these values to propose an indicative chart which may be used by doctors in connection with their forensic activities. The problem of the depth of a wound is frequently exposed to the expert. Without a reliable tool, it is difficult to value and a personal interpretation is often done. Even if, in current days, tomodensitometry is frequently done in vivo or after death, measurement can be difficult because of the local conditions. We classified values according to the different factors of fat repartition (BMI, abdominal diameter, gender). These tables, collectively used, permit evaluation of the distance between wall and thoracic or abdominal vital organs. We suggest an indicative chart designed for forensic doctors in their professional life to help determine the minimum penetration length for a knife, which may wound a vital organ. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  15. Management of intellectual property rights in India: An updated review

    PubMed Central

    Tiwari, R.; Tiwari, G.; Rai, A. K.; Srivastawa, Birendra

    2011-01-01

    The World Trade Organization's agreement on Trade-Related Aspects of Intellectual Property Rights set global minimum standards for the protection of intellectual property, substantially increasing and expanding intellectual property rights, and generated clear gains for the pharmaceutical industry and the developed world. The present review elaborates all aspects of Intellectual Property Rights in detail, along with their protection criteria. PMID:22470229

  16. The effects of age, viewing distance, display type, font type, colour contrast and number of syllables on the legibility of Korean characters.

    PubMed

    Kong, Yong-Ku; Lee, Inseok; Jung, Myung-Chul; Song, Young-Woong

    2011-05-01

    This study evaluated the effects of age (20s and 60s), viewing distance (50 cm, 200 cm), display type (paper, monitor), font type (Gothic, Ming), colour contrast (black letters on white background, white letters on black background) and number of syllables (one, two) on the legibility of Korean characters by using the four legibility measures (minimum letter size for 100% correctness, maximum letter size for 0% correctness, minimum letter size for the least discomfort and maximum letter size for the most discomfort). Ten subjects in each age group read the four letters presented on a slide (letter size varied from 80 pt to 2 pt). Subjects also subjectively rated the reading discomfort of the letters on a 4-point scale (1 = no discomfort, 4 = most discomfort). According to the ANOVA procedure, age, viewing distance and font type significantly affected the four dependent variables (p < 0.05), while the main effect of colour contrast was not statistically significant for any measures. Two-syllable letters had smaller letters than one-syllable letters in the two correctness measures. The younger group could see letter sizes two times smaller than the old group could and the viewing distance of 50 cm showed letters about three times smaller than those at a 200 cm viewing distance. The Gothic fonts were smaller than the Ming fonts. Monitors were smaller than paper for correctness and maximum letter size for the most discomfort. From a comparison of the results for correctness and discomfort, people generally preferred larger letter sizes to those that they could read. The findings of this study may provide basic information for setting a global standard of letter size or font type to improve the legibility of characters written in Korean. STATEMENT OF RELEVANCE: Results obtained in this study will provide basic information and guidelines for setting standards of letter size and font type to improve the legibility of characters written in Korean. Also, the results might offer useful information for people who are working on design of visual displays.

  17. Catering Gluten-Free When Simultaneously Using Wheat Flour.

    PubMed

    Miller, Kathryn; McGough, Norma; Urwin, Heidi

    2016-02-01

    A European law on gluten-free (GF) labeling came into force in 2012, covering foods sold prepacked and in food service establishments, and a similar U.S. Food and Drug Administration (FDA) regulation covers GF labeling from August 2014. Gluten is found in the grains wheat, rye, and barley. A common source of gluten in the kitchen is wheat flour. This research aimed to determine variables that have a significant effect on gluten contamination in commercial kitchens when wheat flour is in use and to establish controls necessary to assure GF production. A pilot study was used to test the following hypotheses: (i) increasing duration of exposure to wheat flour would increase gluten contamination, (ii) increasing distance between the site of preparation and the site of wheat flour would reduce gluten contamination, (iii) the use of a ventilation hood would decrease gluten contamination, and (iv) the use of a barrier segregating the site of preparation of a GF meal and the use of wheat flour would decrease gluten contamination. Petri dishes containing GF rice pudding were placed in three directions at increasing distances (0.5 to 2 m) from a site of wheat flour use. A barrier was in place between a third of samples and the site of wheat flour. After wheat flour was handled for 0.5 and 4.0 h, petri dishes were sealed and the contents were analyzed for gluten. The experiment was duplicated with the ventilation hood on and off. The pilot study revealed that a distance of 2 m from the use of wheat flour was required to control gluten contamination at ≤20 ppm if wheat flour had been in use for 4.0 h. The identified control of distance was tested in five different study sites. In each of the study sites, a test meal was prepared a minimum of 2 m away from the site of wheat flour use. Although kitchens vary and must be considered individually, the established control of a minimum 2 m distance, along with good hygiene practices, was found to be effective in preparing GF meals at all five study sites.

  18. Manifestations of Influence of Solar Activity and Cosmic Ray Intensity on the Wheat Price in the Medieval England (1259-1703 Years)

    NASA Astrophysics Data System (ADS)

    Pustil'Nik, Lev A.; Dorman, L. I.; Yom Din, G.

    2003-07-01

    The database of Professor Rogers, with wheat prices in England in the Middle Ages (1249-1703) was used to search for possible manifestations of solar activity and cosmic ray variations. The main object of the statistical analysis is investigation of bursts of prices. We present a conceptual model of possible modes for sensitivity of wheat prices to weather conditions, caused by solar cycle variations in cosmic rays, and compare the expected price fluctuations with wheat price variations recorded in the Medieval England. We compared statistical properties of the intervals between price bursts with statistical properties of the intervals between extremes (minimums) of solar cycles during the years 1700-2000. Statistical properties of these two samples are similar both in averaged/median values of intervals and in standard deviation of this values. We show that histogram of intervals distribution for price bursts and solar minimums are coincidence with high confidence level. We analyzed direct links between wheat prices and solar activity in the th 17 Century, for which wheat prices and solar activity data as well as cosmic ray intensity (from 10 Be isotop e) are available. We show that for all seven solar activity minimums the observed prices were higher than prices for the nine intervals of maximal solar activity proceed preceding to the minimums. This result, combined with the conclusion on similarity of statistical properties of the price bursts and solar activity extremes we consider as direct evidence of a causal connection between wheat prices bursts and solar activity.

  19. Properties of 10 (18)-10 (19)eV EAS at far core distance

    NASA Technical Reports Server (NTRS)

    Teshima, M.; Nagano, M.; Hara, T.; Hatano, Y.; Hayashida, N.; He, C. X.; Honda, M.; Ishikawa, F.; Kamata, K.; Matsubara, Y.

    1985-01-01

    The properties of 10 to the 18th power - 10 to the 19th power eV EAS showers such as the electron lateral distribution, the muon lateral distribution ( 1Gev), the ratio of muon density to a electron density, the shower front structure and the transition effects in scintillator of 5cm thickness are investigated with the Akeno 4 sq km/20sq km array at far core distances between 500m and 3000m. The fluctuation of densities and arrival time increase rapidly at core distances greater than 2km.

  20. Symbolic Numerical Distance Effect Does Not Reflect the Difference between Numbers.

    PubMed

    Krajcsi, Attila; Kojouharova, Petia

    2017-01-01

    In a comparison task, the larger the distance between the two numbers to be compared, the better the performance-a phenomenon termed as the numerical distance effect. According to the dominant explanation, the distance effect is rooted in a noisy representation, and performance is proportional to the size of the overlap between the noisy representations of the two values. According to alternative explanations, the distance effect may be rooted in the association between the numbers and the small-large categories, and performance is better when the numbers show relatively high differences in their strength of association with the small-large properties. In everyday number use, the value of the numbers and the association between the numbers and the small-large categories strongly correlate; thus, the two explanations have the same predictions for the distance effect. To dissociate the two potential sources of the distance effect, in the present study, participants learned new artificial number digits only for the values between 1 and 3, and between 7 and 9, thus, leaving out the numbers between 4 and 6. It was found that the omitted number range (the distance between 3 and 7) was considered in the distance effect as 1, and not as 4, suggesting that the distance effect does not follow the values of the numbers predicted by the dominant explanation, but it follows the small-large property association predicted by the alternative explanations.

Some links on this page may take you to non-federal websites. Their policies may differ from this site.
Top