25 CFR 547.9 - What are the minimum technical standards for Class II gaming system accounting functions?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF CLASS II GAMES § 547.9 What are the minimum technical standards for Class II gaming system... digits to accommodate the design of the game. (3) Accounting data displayed to the player may be... audit, configuration, recall and test modes; or (ii) Temporarily, during entertaining displays of game...

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...

25 CFR 547.9 - What are the minimum technical standards for Class II gaming system accounting functions?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF CLASS II GAMES § 547.9 What are the minimum technical standards for Class II gaming system... digits to accommodate the design of the game. (3) Accounting data displayed to the player may be... audit, configuration, recall and test modes; or (ii) Temporarily, during entertaining displays of game...

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...

25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

Code of Federal Regulations, 2012 CFR

2012-04-01

... CLASS II GAMES § 547.14 What are the minimum technical standards for electronic random number generation... rules of the game. For example, if a bingo game with 75 objects with numbers or other designations has a... serial correlation (outcomes shall be independent from the previous game); and (x) Test on subsequences...

25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

Code of Federal Regulations, 2010 CFR

2010-04-01

... CLASS II GAMES § 547.14 What are the minimum technical standards for electronic random number generation... rules of the game. For example, if a bingo game with 75 objects with numbers or other designations has a... serial correlation (outcomes shall be independent from the previous game); and (x) Test on subsequences...

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF CLASS II GAMES § 547.7 What are the minimum technical hardware standards applicable to Class II... the game, and are specially manufactured or proprietary and not off-the-shelf, shall display a unique... outcome or integrity of any game, progressive award, financial instrument, cashless transaction, voucher...

78 FR 24061 - Minimum Technical Standards for Class II Gaming Systems and Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-24

... Register that established technical standards for ensuring the integrity of electronic Class II games and aids. 73 FR 60508, Oct. 10, 2008. The technical standards were designed to assist tribal gaming... Class II gaming systems. The standards did not classify which games were Class II games and which games...

25 CFR 547.8 - What are the minimum technical software standards applicable to Class II gaming systems?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF CLASS II GAMES § 547.8 What are the minimum technical software standards applicable to Class II... of Class II games. (a) Player interface displays. (1) If not otherwise provided to the player, the player interface shall display the following: (i) The purchase or wager amount; (ii) Game results; and...

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF CLASS II GAMES § 547.12 What are the minimum technical standards for downloading on a Class II... software, files, data, and prize schedules. (2) Downloads of software, games, prize schedules, or other... performed in a manner that will not affect game play. (5) Downloads shall not affect the integrity of...

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF CLASS II GAMES § 547.12 What are the minimum technical standards for downloading on a Class II... software, files, data, and prize schedules. (2) Downloads of software, games, prize schedules, or other... performed in a manner that will not affect game play. (5) Downloads shall not affect the integrity of...

25 CFR 547.8 - What are the minimum technical software standards applicable to Class II gaming systems?

Code of Federal Regulations, 2011 CFR

2011-04-01

... OF CLASS II GAMES § 547.8 What are the minimum technical software standards applicable to Class II... of Class II games. (a) Player interface displays. (1) If not otherwise provided to the player, the player interface shall display the following: (i) The purchase or wager amount; (ii) Game results; and...

25 CFR 547.8 - What are the minimum technical software standards applicable to Class II gaming systems?

Code of Federal Regulations, 2010 CFR

2010-04-01

... OF CLASS II GAMES § 547.8 What are the minimum technical software standards applicable to Class II... of Class II games. (a) Player interface displays. (1) If not otherwise provided to the player, the player interface shall display the following: (i) The purchase or wager amount; (ii) Game results; and...

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2012 CFR

2012-04-01

... OF CLASS II GAMES § 547.12 What are the minimum technical standards for downloading on a Class II... software, files, data, and prize schedules. (2) Downloads of software, games, prize schedules, or other... performed in a manner that will not affect game play. (5) Downloads shall not affect the integrity of...

Technical standing order : airborne supplemental navigation equipment using the global positioning system (GPS)

DOT National Transportation Integrated Search

2001-01-01

This technical standard order (TSO) prescribes the minimum performance standard that airborne supplemental area navigation equipment using the global positioning system (GPS) must meet in order to be identified with the applicable TSO marking. Airbor...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2011 CFR

2011-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2012 CFR

2012-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2014 CFR

2014-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 101.143 - Minimum path length requirements.

Code of Federal Regulations, 2013 CFR

2013-10-01

... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...

47 CFR 25.205 - Minimum angle of antenna elevation.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 47 Telecommunication 2 2012-10-01 2012-10-01 false Minimum angle of antenna elevation. 25.205... SATELLITE COMMUNICATIONS Technical Standards § 25.205 Minimum angle of antenna elevation. (a) Earth station antennas shall not normally be authorized for transmission at angles less than 5° measured from the...

47 CFR 25.205 - Minimum angle of antenna elevation.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 2 2011-10-01 2011-10-01 false Minimum angle of antenna elevation. 25.205... SATELLITE COMMUNICATIONS Technical Standards § 25.205 Minimum angle of antenna elevation. (a) Earth station antennas shall not normally be authorized for transmission at angles less than 5° measured from the...

47 CFR 25.205 - Minimum angle of antenna elevation.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 47 Telecommunication 2 2014-10-01 2014-10-01 false Minimum angle of antenna elevation. 25.205... SATELLITE COMMUNICATIONS Technical Standards § 25.205 Minimum angle of antenna elevation. (a) Earth station antennas shall not normally be authorized for transmission at angles less than 5° measured from the...

47 CFR 25.205 - Minimum angle of antenna elevation.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 47 Telecommunication 2 2013-10-01 2013-10-01 false Minimum angle of antenna elevation. 25.205... SATELLITE COMMUNICATIONS Technical Standards § 25.205 Minimum angle of antenna elevation. (a) Earth station antennas shall not normally be authorized for transmission at angles less than 5° measured from the...

Confronting Regulatory Cost and Quality Expectations. An Exploration of Technical Change in Minimum Efficiency Performance Standards

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, Margaret; Spurlock, C. Anna; Yang, Hung-Chia

The dual purpose of this project was to contribute to basic knowledge about the interaction between regulation and innovation and to inform the cost and benefit expectations related to technical change which are embedded in the rulemaking process of an important area of national regulation. The area of regulation focused on here is minimum efficiency performance standards (MEPS) for appliances and other energy-using products. Relevant both to U.S. climate policy and energy policy for buildings, MEPS remove certain product models from the market that do not meet specified efficiency thresholds.

Dental Assisting Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide contains the standard dental assisting curriculum for technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level dental assistants, and includes job skills in the technical areas of preventive dentistry; four-handed dentistry; chairside assisting with emphasis in diagnostics,…

77 FR 32465 - Technical Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-01

... minimum odds for Class II games; amend standards for test labs; remove references to the Federal... the Play of Class II Games. 73 FR 60508. The rule added a new part to the Commission's regulations establishing a process for ensuring the integrity of electronic Class II games and aids. The standards were...

76 FR 52734 - Underwater Locating Devices (Acoustic) (Self-Powered)

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-23

...This notice announces the planned revocation of all Technical Standard Order authorizations (TSOA) issued for the production of Underwater Locating Devices (Acoustic) (Self-Powered) manufactured to the TSO-C121 and TSO-C121a specifications. These actions are necessary because the planned issuance of TSO-C121b, Underwater Locating Devices (Acoustic) (Self-Powered), with a minimum performance standard (MPS) that will increase the minimum operating life of Underwater Locating Devices from 30 days to 90 days.

77 FR 13174 - Underwater Locating Devices (Acoustic) (Self-Powered)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-05

...This is a confirmation notice for the planned revocation of all Technical Standard Order authorizations issued for the production of Underwater Locating Devices (Acoustic) (Self-Powered) manufactured to the TSO-C121 and TSO-C121a specifications. These actions are necessary because the planned issuance of TSO-C121b, Underwater Locating Devices (Acoustic) (Self-Powered), minimum performance standard (MPS) will increase the minimum operating life of Underwater Locating Devices from 30 days to 90 days.

English for Speakers of Other Languages (ESOL) and Citizenship Programs. Technical Assistance Paper.

ERIC Educational Resources Information Center

Florida State Dept. of Education, Tallahassee. Div. of Workforce Development.

This technical assistance paper is designed to help local adult education administrators and teachers in Florida as they implement changes in the Adult English for Speakers of Other Languages (ESOL) Program Curriculum Framework, which provides the state with a minimum set of standards to be used by all facilities delivering ESOL citizenship…

Standards for Technological Literacy and STEM Education Delivery through Career and Technical Education Programs

ERIC Educational Resources Information Center

Asunda, Paul A.

2012-01-01

At a minimum, employers rely on career and technical education (CTE) and workforce training systems to supply workers able to perform in their jobs. In CTE classes that seek to integrate science, technology, engineering, and mathematics (STEM) concepts, it falls to the instructors to design and sequence the learning experiences that will promote…

78 FR 49996 - Pipeline Safety: Periodic Updates of Regulatory References to Technical Standards and...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-08-16

..., natural gas and other types of materials transported by pipeline, it is not possible to establish... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Parts..., Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards; 49 CFR part 193, Liquefied...

47 CFR 68.317 - Hearing aid compatibility volume control: technical standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... headset of the telephone, 12 dB of gain minimum and up to 18 dB of gain maximum, when measured in terms of... Instruments With Loop Signaling) . The 12 dB of gain minimum must be achieved without significant clipping of... change in ROLR as a function of the volume control setting that are relevant to the specification of...

47 CFR 68.317 - Hearing aid compatibility volume control: technical standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... headset of the telephone, 12 dB of gain minimum and up to 18 dB of gain maximum, when measured in terms of... Instruments With Loop Signaling) . The 12 dB of gain minimum must be achieved without significant clipping of... change in ROLR as a function of the volume control setting that are relevant to the specification of...

47 CFR 68.317 - Hearing aid compatibility volume control: technical standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... headset of the telephone, 12 dB of gain minimum and up to 18 dB of gain maximum, when measured in terms of... Instruments With Loop Signaling) . The 12 dB of gain minimum must be achieved without significant clipping of... change in ROLR as a function of the volume control setting that are relevant to the specification of...

47 CFR 68.317 - Hearing aid compatibility volume control: technical standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... headset of the telephone, 12 dB of gain minimum and up to 18 dB of gain maximum, when measured in terms of... Instruments With Loop Signaling) . The 12 dB of gain minimum must be achieved without significant clipping of... change in ROLR as a function of the volume control setting that are relevant to the specification of...

47 CFR 68.317 - Hearing aid compatibility volume control: technical standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... headset of the telephone, 12 dB of gain minimum and up to 18 dB of gain maximum, when measured in terms of... Instruments With Loop Signaling) . The 12 dB of gain minimum must be achieved without significant clipping of... change in ROLR as a function of the volume control setting that are relevant to the specification of...

77 FR 58473 - Minimum Technical Standards for Class II Gaming Systems and Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-21

... as printed advertising material that cannot be validated directly by a voucher system. Critical... on that component. EPROM. Erasable Programmable Read Only Memory--a non-volatile storage chip or...

[Physical medicine in hospital. Minimum standards in a physical medical department in acute inpatient areas in rheumatology].

PubMed

Reißhauer, A; Liebl, M E

2012-07-01

Standards for what should be available in terms of equipment and services in a department of physical medicine caring for acute inpatients do not exist in Germany. The profile of a department determines the therapeutic services it focuses on and hence the technical facilities required. The German catalogue of operations and procedures defines minimum thresholds for treatment. In the opinion of the authors a department caring for inpatients with acute rheumatic diseases must, as a minimum, have the facilities and equipment necessary for offering thermotherapeutic treatment. Staff trained in physical therapeutic procedures and occupational therapy is also crucial. Moreover, it is desirable that the staff should be trained in manual therapy.

77 FR 28668 - Technical Standard Order (TSO)-C91a, Emergency Locator Transmitters (ELTs)

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-15

... installed in new production airplanes for over the past 5-years. The FAA reiterates in this final notice... questions. The first question regarded permissibility of minor and major changes to existing TSO-C91a... meet the minimum performance standards contained in TSO-C126a. Cobham's second question requested...

25 CFR 547.5 - What are the rules of interpretation and of general application for this part?

Code of Federal Regulations, 2010 CFR

2010-04-01

... INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II... standards apply. Gaming equipment and software used with Class II gaming systems shall meet all applicable... of winning less than 1 in 50,000,000. (d) Approved equipment and software only. All gaming equipment...

Minimum Requirements for Taxicab Security Cameras.

PubMed

Zeng, Shengke; Amandus, Harlan E; Amendola, Alfred A; Newbraugh, Bradley H; Cantis, Douglas M; Weaver, Darlene

2014-07-01

The homicide rate of taxicab-industry is 20 times greater than that of all workers. A NIOSH study showed that cities with taxicab-security cameras experienced significant reduction in taxicab driver homicides. Minimum technical requirements and a standard test protocol for taxicab-security cameras for effective taxicab-facial identification were determined. The study took more than 10,000 photographs of human-face charts in a simulated-taxicab with various photographic resolutions, dynamic ranges, lens-distortions, and motion-blurs in various light and cab-seat conditions. Thirteen volunteer photograph-evaluators evaluated these face photographs and voted for the minimum technical requirements for taxicab-security cameras. Five worst-case scenario photographic image quality thresholds were suggested: the resolution of XGA-format, highlight-dynamic-range of 1 EV, twilight-dynamic-range of 3.3 EV, lens-distortion of 30%, and shutter-speed of 1/30 second. These minimum requirements will help taxicab regulators and fleets to identify effective taxicab-security cameras, and help taxicab-security camera manufacturers to improve the camera facial identification capability.

Environmental Horticulture Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide contains the standard environmental horticulture curriculum for technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the environmental horticulture field. The general information section contains the following: purpose and objectives; program description,…

25 CFR 547.9 - What are the minimum technical standards for Class II gaming system accounting functions?

Code of Federal Regulations, 2013 CFR

2013-04-01

.... (2) Credit balances must have sufficient digits to accommodate the design of the game. (3) Accounting..., during entertaining displays of game results. (2) Progressive prizes may be added to the player's credit...

25 CFR 547.9 - What are the minimum technical standards for Class II gaming system accounting functions?

Code of Federal Regulations, 2014 CFR

2014-04-01

.... (2) Credit balances must have sufficient digits to accommodate the design of the game. (3) Accounting..., during entertaining displays of game results. (2) Progressive prizes may be added to the player's credit...

Masonry Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This masonry program guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a masonry program. The general information section contains the following: purpose and objectives; program description, including admissions, typical job titles, and accreditation and certification;…

Amenity or necessity? street standards as parking policy.

DOT National Transportation Integrated Search

2012-06-01

This paper explores the rationales underlying the use of minimum street width requirements to mandate street parking. A survey of 97 cities reveals that this mandate is not a technical necessity based on safety concerns or an amenity reflecting marke...

Electrical Distribution Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide contains the standard electrical distribution curriculum for technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the electrical distribution field, and in job skills such as construction, maintenance, and repair of overhead and underground electrical…

[The Humanitarian Charter and minimum standards in humanitarian response are applicable in German refugee facilities].

PubMed

Gardemann, Joachim; Wilp, Thomas

2016-05-01

In recent refugee migration into Germany the responsibilities and reactions of health authorities are still lacking general co-ordination. Can the ethical and technical standards of international humanitarian assistance serve as an appropriate and even a compulsory guideline for relief agencies, public health and regulatory authorities in Germany? Documents from the field of medical ethics, medical law, international humanitarian law and disaster medicine will be examined and checked for practicability by consulting experiences during the 1990s Balkan wars refugee movement and international missions of relief agencies. Ethical and technical standards of international humanitarian assistance have been developed, improved and evaluated for 20 years, and are valuable tools for emergency management. Victims of disaster or conflict have a right to live in dignity and therefore have a right to receive health care according to international standards. International ethical and technical standards for refugees should be considered in the Federal Republic of Germany like in any other country.

14 CFR 1.2 - Abbreviations and symbols.

Code of Federal Regulations, 2011 CFR

2011-01-01

... alignment indicator lights. TACAN means ultra-high frequency tactical air navigational aid. TAS means true... means technical standard order. TVOR means very high frequency terminal omnirange station. V Ameans... 2minmeans minimum takeoff safety speed. VFRmeans visual flight rules. VHFmeans very high frequency. VORmeans...

14 CFR 1.2 - Abbreviations and symbols.

Code of Federal Regulations, 2014 CFR

2014-01-01

... alignment indicator lights. TACAN means ultra-high frequency tactical air navigational aid. TAS means true... means technical standard order. TVOR means very high frequency terminal omnirange station. V Ameans... 2minmeans minimum takeoff safety speed. VFRmeans visual flight rules. VHFmeans very high frequency. VORmeans...

14 CFR 1.2 - Abbreviations and symbols.

Code of Federal Regulations, 2013 CFR

2013-01-01

... alignment indicator lights. TACAN means ultra-high frequency tactical air navigational aid. TAS means true... means technical standard order. TVOR means very high frequency terminal omnirange station. V Ameans... 2minmeans minimum takeoff safety speed. VFRmeans visual flight rules. VHFmeans very high frequency. VORmeans...

14 CFR 1.2 - Abbreviations and symbols.

Code of Federal Regulations, 2012 CFR

2012-01-01

... alignment indicator lights. TACAN means ultra-high frequency tactical air navigational aid. TAS means true... means technical standard order. TVOR means very high frequency terminal omnirange station. V Ameans... 2minmeans minimum takeoff safety speed. VFRmeans visual flight rules. VHFmeans very high frequency. VORmeans...

Minimum Standards for Education: Preparedness, Response, Recovery

ERIC Educational Resources Information Center

Inter-Agency Network for Education in Emergencies, 2010

2010-01-01

Education in emergencies comprises learning opportunities for all ages. It encompasses early childhood development, primary, secondary, non-formal, technical, vocational, higher and adult education. In emergency situations through to recovery, quality education provides physical, psychosocial and cognitive protection that can sustain and save…

Respiratory Therapy Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a respiratory therapy technology program. The guide contains four sections. The General Information section contains an introduction giving an overview and defining the purpose and objectives, a program…

Dental Laboratory Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide contains the standard dental laboratory technology curriculum for both diploma programs and associate degree programs in technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the dental laboratory technology field. The general information section contains the…

25 CFR 547.11 - What are the minimum technical standards for money and credit handling?

Code of Federal Regulations, 2014 CFR

2014-04-01

... interface is: (i) Involved in the play of a game; (ii) In audit mode, recall mode or any test mode; (iii... specifically designed to prevent repetition of validation numbers; and (B) Has some form of checkcode or other...

25 CFR 547.11 - What are the minimum technical standards for money and credit handling?

Code of Federal Regulations, 2013 CFR

2013-04-01

... interface is: (i) Involved in the play of a game; (ii) In audit mode, recall mode or any test mode; (iii... specifically designed to prevent repetition of validation numbers; and (B) Has some form of checkcode or other...

Printing/Graphic Arts Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a printing/graphics technology program. It includes specializations in art and copy preparation, prepress/image assembly, and lithographic press operations. The guide contains four major sections. The General…

Emergency Medical Services Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This program guide contains the standard emergency medical services curriculum for technical institutes in Georgia. The curriculum encompasses the minimum competencies required for entry-level workers in the emergency medical services field, and includes job skills in six emergency medical services divisions outlined in the national curriculum:…

46 CFR 8.230 - Minimum standards for a recognized classification society.

Code of Federal Regulations, 2010 CFR

2010-10-01

... and maintain class rules in the English language for the design, construction and certification of ships and their associated essential engineering systems; (8) Maintain written survey procedures in the English language; (9) Have adequate resources, including research, technical, and managerial staff, to...

46 CFR 8.230 - Minimum standards for a recognized classification society.

Code of Federal Regulations, 2014 CFR

2014-10-01

... and maintain class rules in the English language for the design, construction and certification of ships and their associated essential engineering systems; (8) Maintain written survey procedures in the English language; (9) Have adequate resources, including research, technical, and managerial staff, to...

46 CFR 8.230 - Minimum standards for a recognized classification society.

Code of Federal Regulations, 2013 CFR

2013-10-01

... and maintain class rules in the English language for the design, construction and certification of ships and their associated essential engineering systems; (8) Maintain written survey procedures in the English language; (9) Have adequate resources, including research, technical, and managerial staff, to...

34 CFR 421.3 - What activities may the Secretary fund?

Code of Federal Regulations, 2011 CFR

2011-07-01

... VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION BUSINESS AND EDUCATION STANDARDS PROGRAM General... for projects that organize and operate business-labor-education technical committees that propose... in those divisions or specialty areas; (c) Minimum tools and equipment required in those divisions or...

34 CFR 421.3 - What activities may the Secretary fund?

Code of Federal Regulations, 2010 CFR

2010-07-01

... VOCATIONAL AND ADULT EDUCATION, DEPARTMENT OF EDUCATION BUSINESS AND EDUCATION STANDARDS PROGRAM General... for projects that organize and operate business-labor-education technical committees that propose... in those divisions or specialty areas; (c) Minimum tools and equipment required in those divisions or...

Minimum Requirements for Taxicab Security Cameras*

PubMed Central

Zeng, Shengke; Amandus, Harlan E.; Amendola, Alfred A.; Newbraugh, Bradley H.; Cantis, Douglas M.; Weaver, Darlene

2015-01-01

Problem The homicide rate of taxicab-industry is 20 times greater than that of all workers. A NIOSH study showed that cities with taxicab-security cameras experienced significant reduction in taxicab driver homicides. Methods Minimum technical requirements and a standard test protocol for taxicab-security cameras for effective taxicab-facial identification were determined. The study took more than 10,000 photographs of human-face charts in a simulated-taxicab with various photographic resolutions, dynamic ranges, lens-distortions, and motion-blurs in various light and cab-seat conditions. Thirteen volunteer photograph-evaluators evaluated these face photographs and voted for the minimum technical requirements for taxicab-security cameras. Results Five worst-case scenario photographic image quality thresholds were suggested: the resolution of XGA-format, highlight-dynamic-range of 1 EV, twilight-dynamic-range of 3.3 EV, lens-distortion of 30%, and shutter-speed of 1/30 second. Practical Applications These minimum requirements will help taxicab regulators and fleets to identify effective taxicab-security cameras, and help taxicab-security camera manufacturers to improve the camera facial identification capability. PMID:26823992

Anesthesiologists' perceptions of minimum acceptable work habits of nurse anesthetists.

PubMed

Logvinov, Ilana I; Dexter, Franklin; Hindman, Bradley J; Brull, Sorin J

2017-05-01

Work habits are non-technical skills that are an important part of job performance. Although non-technical skills are usually evaluated on a relative basis (i.e., "grading on a curve"), validity of evaluation on an absolute basis (i.e., "minimum passing score") needs to be determined. Survey and observational study. None. None. The theme of "work habits" was assessed using a modification of Dannefer et al.'s 6-item scale, with scores ranging from 1 (lowest performance) to 5 (highest performance). E-mail invitations were sent to all consultant and fellow anesthesiologists at Mayo Clinic in Florida, Arizona, and Minnesota. Because work habits expectations can be generational, the survey was designed for adjustment based on all invited (responding or non-responding) anesthesiologists' year of graduation from residency. The overall mean±standard deviation of the score for anesthesiologists' minimum expectations of nurse anesthetists' work habits was 3.64±0.66 (N=48). Minimum acceptable scores were correlated with the year of graduation from anesthesia residency (linear regression P=0.004). Adjusting for survey non-response using all N=207 anesthesiologists, the mean of the minimum acceptable work habits adjusted for year of graduation was 3.69 (standard error 0.02). The minimum expectations for nurse anesthetists' work habits were compared with observational data obtained from the University of Iowa. Among 8940 individual nurse anesthetist work habits scores, only 2.6% were <3.69. All N=65 of the Iowa nurse anesthetists' mean work habits scores were significantly greater than the Mayo estimate (3.69) for the minimum expectations; all P<0.00024. Our results suggest that routinely evaluated work habits of nurse anesthetists within departments should not be compared with an appropriate minimum score (i.e., of 3.69). Instead, work habits scores should be analyzed based on relative reporting among anesthetists. Copyright © 2017 Elsevier Inc. All rights reserved.

Surgical Technology Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This surgical technology program guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a surgical technology program. The program guide is designed to relate primarily to the development of those skills needed by individuals in the field to provide services in the…

Tank Level Detection Devices for the Carriage of Oil : Oil Pollution Act of 1990, Section 4110

DOT National Transportation Integrated Search

1992-12-29

This study was conducted to assess the technical feasibility of satisfying the requirements of Section 4110 of the Oil Pollution Act of 1990 (OPA 90), which calls for minimum regulatory standards tank level monitoring devices in teh cargo tanks of ta...

Medical Assisting Program Guide.

ERIC Educational Resources Information Center

Georgia Univ., Athens. Dept. of Vocational Education.

This guide presents the standard curriculum for technical institutes in Georgia. The curriculum addresses the minimum competencies for a medical assisting program. The program guide is designed to relate primarily to the development of those skills needed by individuals in the medical assisting field, such as medical law and ethics, typing,…

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Code of Federal Regulations, 2013 CFR

2013-04-01

... or integrity of the game, and are specially manufactured or proprietary and not off-the-shelf, must... the potential to affect the outcome or integrity of any game, progressive award, financial instrument... of a robust construction designed to resist determined illegal entry. All protuberances and...

25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

Code of Federal Regulations, 2014 CFR

2014-04-01

... or integrity of the game, and are specially manufactured or proprietary and not off-the-shelf, must... the potential to affect the outcome or integrity of any game, progressive award, financial instrument... of a robust construction designed to resist determined illegal entry. All protuberances and...

Linking rights and standards: the process of developing "rights-based" minimum standards on food security, nutrition and food aid.

PubMed

Young, Helen; Taylor, Anna; Way, Sally-Anne; Leaning, Jennifer

2004-06-01

This article examines the recent revision of the Sphere Minimum Standards in disaster response relating to food security, nutrition and food aid. It describes how the revision attempted to incorporate the principles of the Humanitarian Charter, as well as relevant human rights principles and values into the Sphere Minimum Standards. The initial aim of the revision was to ensure that the Sphere Minimum Standards better reflected the principles embodied in the Humanitarian Charter. This was later broadened to ensure that key legal standards and principles from human rights and humanitarian law were considered and also incorporated, in part to fill the "protection gap" within the existing standards. In relation to the food security, nutrition and food aid standards, it was agreed by participants in the process that the human right to adequate food and freedom from hunger should be incorporated. In relation to more general principles underlying the Humanitarian Charter, itself drawn largely from human rights and humanitarian law, it was agreed that there was a need to strengthen "protection" elements within the standards and a need to incorporate the basic principles of the right to life with dignity, non-discrimination, impartiality and participation, as well as to explore the relevance of the concept of the progressive realisation of the right to food. The questions raised in linking rights to operational standards required thought, on the one hand, about whether the technical standards reflected a deep understanding of the values expressed within the legal instruments, and whether the existing standards were adequate in relation to those legal rights. On the other hand, it also required reflection on how operational standards like Sphere could give concrete content to human rights, such as the right to food and the right to be free from hunger. However, there remain challenges in examining what a rights-based approach will mean in terms of the role of humanitarian agencies as duty-bearers of rights, given that the primary responsibility rests with state governments. It will also require reflection on the modes and mechanisms of accountability that are brought to bear in ensuring the implementation of the Minimum Standards.

25 CFR 547.2 - How do these regulations affect state jurisdiction?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false How do these regulations affect state jurisdiction? 547.2 Section 547.2 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES § 547.2 How do these...

25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

Code of Federal Regulations, 2013 CFR

2013-04-01

... the application under the rules of the game. For example, if a bingo game with 75 objects with numbers... test potency and degree of serial correlation (outcomes must be independent from the previous game...) General requirements. (1) Software that calls an RNG to derive game outcome events must immediately use...

25 CFR 547.2 - How do these regulations affect state jurisdiction?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false How do these regulations affect state jurisdiction? 547.2 Section 547.2 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES § 547.2 How do these...

25 CFR 547.2 - How do these regulations affect state jurisdiction?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false How do these regulations affect state jurisdiction? 547.2 Section 547.2 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY OF CLASS II GAMES § 547.2 How do these...

25 CFR 547.14 - What are the minimum technical standards for electronic random number generation?

Code of Federal Regulations, 2014 CFR

2014-04-01

... the application under the rules of the game. For example, if a bingo game with 75 objects with numbers... test potency and degree of serial correlation (outcomes must be independent from the previous game...) General requirements. (1) Software that calls an RNG to derive game outcome events must immediately use...

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2013 CFR

2013-04-01

... limited to software, files, data, and prize schedules. (2) Downloads must use secure methodologies that... date of the completion of the download; (iii) The Class II gaming system components to which software was downloaded; (iv) The version(s) of download package and any software downloaded. Logging of the...

25 CFR 547.12 - What are the minimum technical standards for downloading on a Class II gaming system?

Code of Federal Regulations, 2014 CFR

2014-04-01

... limited to software, files, data, and prize schedules. (2) Downloads must use secure methodologies that... date of the completion of the download; (iii) The Class II gaming system components to which software was downloaded; (iv) The version(s) of download package and any software downloaded. Logging of the...

Policies and Procedures for the Operation of Vocational-Technical Education in the State of New Mexico.

ERIC Educational Resources Information Center

New Mexico Occupational Research and Development Coordinating Unit, Santa Fe.

This manual, developed after a number of statewide meetings, sets forth standards to provide a minimum regulation base upon which quality vocational education programs can be built. Policies and procedures are given for: (1) Agricultural Education, (2) Distributive Education, (3) Health Occupations Education, (4) Home Economics Education, (5)…

77 FR 19069 - Airworthiness Directives; Goodrich Evacuation Systems Approved Under Technical Standard Order...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-30

... seal and allowed the pressure in certain slides/ rafts to fall below the minimum raft mode pressure for the unit. We are issuing this AD to prevent loss of pressure in the escape slides/rafts after an emergency evacuation, which could result in inadequate buoyancy to support the raft's passenger capacity...

Comparison of Test Procedures and Energy Efficiency Criteria in Selected International Standards & Labeling Programs for Copy Machines, External Power Supplies, LED Displays, Residential Gas Cooktops and Televisions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zheng, Nina; Zhou, Nan; Fridley, David

2012-03-01

This report presents a technical review of international minimum energy performance standards (MEPS), voluntary and mandatory energy efficiency labels and test procedures for five products being considered for new or revised MEPS in China: copy machines, external power supply, LED displays, residential gas cooktops and flat-screen televisions. For each product, an overview of the scope of existing international standards and labeling programs, energy values and energy performance metrics and description and detailed summary table of criteria and procedures in major test standards are presented.

78 FR 11795 - Minimum Technical Standards for Class II Gaming Systems and Equipment

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

... threshold amount. The Commission increased that amount in the MICS from $1,000,000 to $3,000,000. The... considered to be small entities for the purposes of the Regulatory Flexibility Act. Small Business Regulatory Enforcement Fairness Act The proposed rule is not a major rule under 5 U.S.C. 804(2), the Small Business...

Locating responsibility: the Sphere Humanitarian Charter and its rationale.

PubMed

Darcy, James

2004-06-01

Criticised by some as a technical initiative that neglects core principles, Sphere was seen by its originators precisely as an articulation of principle. The Humanitarian Charter was the main vehicle through which this was expressed, but its relationship to the Minimum Standards has remained a matter of uncertainty. Specifically, it was unclear in the original (1999) edition of Sphere how the concept of rights informed the Minimum Standards. The revised (2004) edition goes some way to clarifying this in the way the standards are framed, yet the link between the standards and the charter remains unclear. The concern with the quality and accountability of humanitarian assistance, which motivated the attempt to establish system-wide standards through the Sphere Project, was accompanied by a desire to establish such actions in a wider framework of legal and political responsibility. In part, this reflects the conditional nature of the undertaking that agencies make when they adopt Sphere. This aspect of the charter has been neglected, but it is fundamental to an understanding of the standards and their application. This paper considers the rationale of the Sphere Humanitarian Charter and the conceptual model that underpins it. It discusses the relationship between the charter and the Minimum Standards, and the sense in which the latter are properly called "rights-based" (explored further in a related paper herein by Young and Taylor). The author was closely involved in the conception and drafting of the charter, and this paper attempts to convey some of the thinking that lay behind it.

25 CFR 547.8 - What are the minimum technical software standards applicable to Class II gaming systems?

Code of Federal Regulations, 2014 CFR

2014-04-01

... display the following: (i) The purchase or wager amount; (ii) Game results; and (iii) Any player credit balance. (2) Between plays of any game and until the start of the next play, or until the player selects a new game option such as purchase or wager amount or card selection, whichever is earlier, if not...

25 CFR 547.8 - What are the minimum technical software standards applicable to Class II gaming systems?

Code of Federal Regulations, 2013 CFR

2013-04-01

... display the following: (i) The purchase or wager amount; (ii) Game results; and (iii) Any player credit balance. (2) Between plays of any game and until the start of the next play, or until the player selects a new game option such as purchase or wager amount or card selection, whichever is earlier, if not...

DOD Training: Many DOD Linguists Do Not Meet Minimum Proficiency Standards. Report to the Chairman, Committee on Appropriations, U.S. Senate.

ERIC Educational Resources Information Center

General Accounting Office, Washington, DC. National Security and International Affairs Div.

The report, from the General Accounting Office to the chairman of the Senate's committee on appropriations, responds to a request for review of Department of Defense (DOD) training of linguists engaged in intelligence-related activities. It summarizes its examination of: (1) the language and technical training provided to DOD linguistics; and (2)…

Implementing Speed and Separation Monitoring in Collaborative Robot Workcells.

PubMed

Marvel, Jeremy A; Norcross, Rick

2017-04-01

We provide an overview and guidance for the Speed and Separation Monitoring methodology as presented in the International Organization of Standardization's technical specification 15066 on collaborative robot safety. Such functionality is provided by external, intelligent observer systems integrated into a robotic workcell. The SSM minimum protective distance function equation is discussed in detail, with consideration for the input values, implementation specifications, and performance expectations. We provide analytical analyses and test results of the current equation, discuss considerations for implementing SSM in human-occupied environments, and provide directions for technological advancements toward standardization.

Implementing Speed and Separation Monitoring in Collaborative Robot Workcells

PubMed Central

Marvel, Jeremy A.; Norcross, Rick

2016-01-01

We provide an overview and guidance for the Speed and Separation Monitoring methodology as presented in the International Organization of Standardization's technical specification 15066 on collaborative robot safety. Such functionality is provided by external, intelligent observer systems integrated into a robotic workcell. The SSM minimum protective distance function equation is discussed in detail, with consideration for the input values, implementation specifications, and performance expectations. We provide analytical analyses and test results of the current equation, discuss considerations for implementing SSM in human-occupied environments, and provide directions for technological advancements toward standardization. PMID:27885312

Robust interferometry against imperfections based on weak value amplification

NASA Astrophysics Data System (ADS)

Fang, Chen; Huang, Jing-Zheng; Zeng, Guihua

2018-06-01

Optical interferometry has been widely used in various high-precision applications. Usually, the minimum precision of an interferometry is limited by various technical noises in practice. To suppress such kinds of noises, we propose a scheme which combines the weak measurement with the standard interferometry. The proposed scheme dramatically outperforms the standard interferometry in the signal-to-noise ratio and the robustness against noises caused by the optical elements' reflections and the offset fluctuation between two paths. A proof-of-principle experiment is demonstrated to validate the amplification theory.

[The history of optical signals for traffic regulation].

PubMed

Draeger, J; Harsch, V

2008-04-01

For signal transmission in traffic today, different optical, acoustic, or other physical or technical means are used for information. The different kinds of traffic (water navigation, road and rail, and, later air transport) made traffic regulation necessary early on. This regulation, from its very beginning in ancient times, began by means of optical signals; nowadays, this remains the most important method. From the very start, minimum requirements for the navigator's vision, color discrimination, dark adaptation, and even visual field were needed. For historical reasons, it was in seafaring medicine that these first developed. Besides the development of the different signals, methods for checking the requirements were soon developed. National and international requirements have been very different. Only within the last 50 years has international cooperation led to the acceptance of general standards for the different traffic modes. This article discusses the technical development of optical signals for the different kinds of traffic, from ancient times to the present, and explains the development of minimum requirements for the different visual functions.

Technical approach to groundwater restoration. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1993-11-01

The Technical Approach to Groundwater Restoration (TAGR) provides general technical guidance to implement the groundwater restoration phase of the Uranium Mill Tailings Remedial Action (UMTRA) Project. The TAGR includes a brief overview of the surface remediation and groundwater restoration phases of the UMTRA Project and describes the regulatory requirements, the National Environmental Policy Act (NEPA) process, and regulatory compliance. A section on program strategy discusses program optimization, the role of risk assessment, the observational approach, strategies for meeting groundwater cleanup standards, and remedial action decision-making. A section on data requirements for groundwater restoration evaluates the data quality objectives (DQO) andmore » minimum data required to implement the options and comply with the standards. A section on sits implementation explores the development of a conceptual site model, approaches to site characterization, development of remedial action alternatives, selection of the groundwater restoration method, and remedial design and implementation in the context of site-specific documentation in the site observational work plan (SOWP) and the remedial action plan (RAP). Finally, the TAGR elaborates on groundwater monitoring necessary to evaluate compliance with the groundwater cleanup standards and protection of human health and the environment, and outlines licensing procedures.« less

Particle mobility size spectrometers: harmonization of technical standards and data structure to facilitate high quality long-term observations of atmospheric particle number size distributions

NASA Astrophysics Data System (ADS)

Wiedensohler, A.; Birmili, W.; Nowak, A.; Sonntag, A.; Weinhold, K.; Merkel, M.; Wehner, B.; Tuch, T.; Pfeifer, S.; Fiebig, M.; Fjäraa, A. M.; Asmi, E.; Sellegri, K.; Depuy, R.; Venzac, H.; Villani, P.; Laj, P.; Aalto, P.; Ogren, J. A.; Swietlicki, E.; Roldin, P.; Williams, P.; Quincey, P.; Hüglin, C.; Fierz-Schmidhauser, R.; Gysel, M.; Weingartner, E.; Riccobono, F.; Santos, S.; Grüning, C.; Faloon, K.; Beddows, D.; Harrison, R. M.; Monahan, C.; Jennings, S. G.; O'Dowd, C. D.; Marinoni, A.; Horn, H.-G.; Keck, L.; Jiang, J.; Scheckman, J.; McMurry, P. H.; Deng, Z.; Zhao, C. S.; Moerman, M.; Henzing, B.; de Leeuw, G.

2010-12-01

Particle mobility size spectrometers often referred to as DMPS (Differential Mobility Particle Sizers) or SMPS (Scanning Mobility Particle Sizers) have found a wide application in atmospheric aerosol research. However, comparability of measurements conducted world-wide is hampered by lack of generally accepted technical standards with respect to the instrumental set-up, measurement mode, data evaluation as well as quality control. This article results from several instrument intercomparison workshops conducted within the European infrastructure project EUSAAR (European Supersites for Atmospheric Aerosol Research). Under controlled laboratory conditions, the number size distribution from 20 to 200 nm determined by mobility size spectrometers of different design are within an uncertainty range of ±10% after correcting internal particle losses, while below and above this size range the discrepancies increased. Instruments with identical design agreed within ±3% in the peak number concentration when all settings were done carefully. Technical standards were developed for a minimum requirement of mobility size spectrometry for atmospheric aerosol measurements. Technical recommendations are given for atmospheric measurements including continuous monitoring of flow rates, temperature, pressure, and relative humidity for the sheath and sample air in the differential mobility analyser. In cooperation with EMEP (European Monitoring and Evaluation Program), a new uniform data structure was introduced for saving and disseminating the data within EMEP. This structure contains three levels: raw data, processed data, and final particle size distributions. Importantly, we recommend reporting raw measurements including all relevant instrument parameters as well as a complete documentation on all data transformation and correction steps. These technical and data structure standards aim to enhance the quality of long-term size distribution measurements, their comparability between different networks and sites, and their transparency and traceability back to raw data.

Technical Adequacy of the easyCBM[R] Mathematics Measures: Grades 3-8, 2009-2010 Version. Technical Report #1007

ERIC Educational Resources Information Center

Nese, Joseph F. T.; Lai, Cheng-Fei; Anderson, Daniel; Jamgochian, Elisa M.; Kamata, Akihito; Saez, Leilani; Park, Bitnara J.; Alonzo, Julie; Tindal, Gerald

2010-01-01

In this technical report, data are presented on the practical utility, reliability, and validity of the easyCBM[R] mathematics (2009-2010 version) measures for students in grades 3-8 within four districts in two states. Analyses include: minimum acceptable within-year growth; minimum acceptable year-end benchmark performance; internal and…

EQUAL-quant: an international external quality assessment scheme for real-time PCR.

PubMed

Ramsden, Simon C; Daly, Sarah; Geilenkeuser, Wolf-Jochen; Duncan, Graeme; Hermitte, Fabienne; Marubini, Ettore; Neumaier, Michael; Orlando, Claudio; Palicka, Vladimir; Paradiso, Angelo; Pazzagli, Mario; Pizzamiglio, Sara; Verderio, Paolo

2006-08-01

Quantitative gene expression analysis by real-time PCR is important in several diagnostic areas, such as the detection of minimum residual disease in leukemia and the prognostic assessment of cancer patients. To address quality assurance in this technically challenging area, the European Union (EU) has funded the EQUAL project to develop methodologic external quality assessment (EQA) relevant to diagnostic and research laboratories among the EU member states. We report here the results of the EQUAL-quant program, which assesses standards in the use of TaqMan probes, one of the most widely used assays in the implementation of real-time PCR. The EQUAL-quant reagent set was developed to assess the technical execution of a standard TaqMan assay, including RNA extraction, reverse transcription, and real-time PCR quantification of target DNA copy number. The multidisciplinary EQA scheme included 137 participating laboratories from 29 countries. We demonstrated significant differences in performance among laboratories, with 20% of laboratories reporting at least one result lacking in precision and/or accuracy according to the statistical procedures described. No differences in performance were observed for the >10 different testing platforms used by the study participants. This EQA scheme demonstrated both the requirement and demand for external assessment of technical standards in real-time PCR. The reagent design and the statistical tools developed within this project will provide a benchmark for defining acceptable working standards in this emerging technology.

SU-E-CAMPUS-J-04: Image Guided Radiation Therapy (IGRT): Review of Technical Standards and Credentialing in Radiotherapy Clinical Trials

DOE Office of Scientific and Technical Information (OSTI.GOV)

Giaddui, T; Chen, W; Yu, J

2014-06-15

Purpose: To review IGRT credentialing experience and unexpected technical issues encountered in connection with advanced radiotherapy technologies as implemented in RTOG clinical trials. To update IGRT credentialing procedures with the aim of improving the quality of the process, and to increase the proportion of IGRT credentialing compliance. To develop a living disease site-specific IGRT encyclopedia. Methods: Numerous technical issues were encountered during the IGRT credentialing process. The criteria used for credentialing review were based on: image quality; anatomy included in fused data sets and shift results. Credentialing requirements have been updated according to the AAPM task group reports for IGRTmore » to ensure that all required technical items are included in the quality review process. Implementation instructions have been updated and expanded for recent protocols. Results: Technical issues observed during the credentialing review process include, but are not limited to: poor quality images; inadequate image acquisition region; poor data quality; shifts larger than acceptable; no soft tissue surrogate. The updated IGRT credentialing process will address these issues and will also include the technical items required from AAPM: TG 104; TG 142 and TG 179 reports. An instruction manual has been developed describing a remote credentialing method for reviewers. Submission requirements are updated, including images/documents as well as facility questionnaire. The review report now includes summary of the review process and the parameters that reviewers check. We have reached consensus on the minimum IGRT technical requirement for a number of disease sites. RTOG 1311(NRG-BR002A Phase 1 Study of Stereotactic Body Radiotherapy (SBRT) for the Treatment of Multiple Metastases) is an example, here; the protocol specified the minimum requirement for each anatomical sites (with/without fiducials). Conclusion: Technical issues are identified and reported. IGRT guidelines are updated, with the corresponding credentialing requirements. An IGRT encyclopedia describing site-specific implementation issues is currently in development.« less

Revised version of quality guidelines for presurgical epilepsy evaluation and surgical epilepsy therapy issued by the Austrian, German, and Swiss working group on presurgical epilepsy diagnosis and operative epilepsy treatment.

PubMed

Rosenow, Felix; Bast, Thomas; Czech, Thomas; Feucht, Martha; Hans, Volkmar H; Helmstaedter, Christoph; Huppertz, Hans-Jürgen; Noachtar, Soheyl; Oltmanns, Frank; Polster, Tilman; Seeck, Margitta; Trinka, Eugen; Wagner, Kathrin; Strzelczyk, Adam

2016-08-01

The definition of minimal standards remains pivotal as a basis for a high standard of care and as a basis for staff allocation or reimbursement. Only limited publications are available regarding the required staffing or methodologic expertise in epilepsy centers. The executive board of the working group (WG) on presurgical epilepsy diagnosis and operative epilepsy treatment published the first guidelines in 2000 for Austria, Germany, and Switzerland. In 2014, revised guidelines were published and the WG decided to publish an unaltered English translation in this report. Because epilepsy surgery is an elective procedure, quality standards are particularly high. As detailed in the first edition of these guidelines, quality control relates to seven different domains: (1) establishing centers with a sufficient number of sufficiently and specifically trained personnel, (2) minimum technical standards and equipment, (3) continuous medical education of employees, (4) surveillance by trained personnel during video electroencephalography (EEG) monitoring (VEM), (5) systematic acquisition of clinical and outcome data, (6) the minimum number of preoperative evaluations and epilepsy surgery procedures, and (7) the cooperation of epilepsy centers. These standards required the certification of the different professions involved and minimum numbers of procedures. In the subsequent decade, quite a number of colleagues were certified by the trinational WG; therefore, the executive board of the WG decided in 2013 to make these standards obligatory. This revised version is particularly relevant given that the German procedure classification explicitly refers to the guidelines of the WG with regard to noninvasive/invasive preoperative video-EEG monitoring and invasive intraoperative diagnostics in epilepsy. Wiley Periodicals, Inc. © 2016 International League Against Epilepsy.

77 FR 54163 - Health Information Technology: Standards, Implementation Specifications, and Certification...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-04

...With this final rule, the Secretary of Health and Human Services adopts certification criteria that establish the technical capabilities and specify the related standards and implementation specifications that Certified Electronic Health Record (EHR) Technology will need to include to, at a minimum, support the achievement of meaningful use by eligible professionals, eligible hospitals, and critical access hospitals under the Medicare and Medicaid EHR Incentive Programs beginning with the EHR reporting periods in fiscal year and calendar year 2014. This final rule also makes changes to the permanent certification program for health information technology, including changing the program's name to the ONC HIT Certification Program.

78 FR 17155 - Standards for the Growing, Harvesting, Packing, and Holding of Produce for Human Consumption...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-20

...The Food and Drug Administration (FDA or we) is correcting the preamble to a proposed rule that published in the Federal Register of January 16, 2013. That proposed rule would establish science-based minimum standards for the safe growing, harvesting, packing, and holding of produce, meaning fruits and vegetables grown for human consumption. FDA proposed these standards as part of our implementation of the FDA Food Safety Modernization Act. The document published with several technical errors, including some errors in cross references, as well as several errors in reference numbers cited throughout the document. This document corrects those errors. We are also placing a corrected copy of the proposed rule in the docket.

Determination of service standard time for liquid waste parameter in certification institution

NASA Astrophysics Data System (ADS)

Sembiring, M. T.; Kusumawaty, D.

2018-02-01

Baristand Industry Medan is a technical implementation unit under the Industrial and Research and Development Agency, the Ministry of Industry. One of the services often used in Baristand Industry Medan is liquid waste testing service. The company set the standard of service 9 working days for testing services. At 2015, 89.66% on testing services liquid waste does not meet the specified standard of services company. The purpose of this research is to specify the standard time of each parameter in testing services liquid waste. The method used is the stopwatch time study. There are 45 test parameters in liquid waste laboratory. The measurement of the time done 4 samples per test parameters using the stopwatch. From the measurement results obtained standard time that the standard Minimum Service test of liquid waste is 13 working days if there is testing E. coli.

High School Graduation Minimum Competency Requirements. Final Technical Report.

ERIC Educational Resources Information Center

Austin Independent School District, TX. Office of Research and Evaluation.

This technical report details the testing results and analyses supporting the evaluation findings related to the Austin (Texas) Independent School District (AISD) minimum competency graduation requirements. The graduation competency status of all AISD students in grades 8 to 12 are documented. The report provides additional information on the data…

Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project: KDP-A for Phase 2 Minimum Operational Performance Standards

NASA Technical Reports Server (NTRS)

Grindle, Laurie; Hackenberg, Davis L.

2016-01-01

UAS Integration in the NAS Project has: a) Developed Technical Challenges that are crucial to UAS integration, aligned with NASA's Strategic Plan and Thrusts, and support FAA standards development. b) Demonstrated rigorous project management processes through the execution of previous phases. c) Defined Partnership Plans. d) Established path to KDP-C. Request approval of Technical Challenges, execution of partnerships and plans, and execution of near-term FY17 activities. There is an increasing need to fly UAS in the NAS to perform missions of vital importance to National Security and Defense, Emergency Management, and Science. There is also an emerging need to enable commercial applications such as cargo transport (e.g. FedEx). Unencumbered NAS Access for Civil/Commercial UAS. Provide research findings, utilizing simulation and flight tests, to support the development and validation of DAA and C2 technologies necessary for integrating Unmanned Aircraft Systems into the National Airspace System.

Physiological approach to optimal stereographic game programming: a technical guide

NASA Astrophysics Data System (ADS)

Martens, William L.; McRuer, Robert; Childs, C. Timothy; Viirree, Erik

1996-04-01

With the advent of mass distribution of consumer VR games comes an imperative to set health and safety standards for the hardware and software used to deliver stereographic content. This is particularly important for game developers who intend to present this stereographic content via head-mounted display (HMD). The visual discomfort that is commonly reported by the user of HMD-based VR games presumably could be kept to a minimum if game developers were provided with standards for the display of stereographic imagery. In this paper, we draw upon both results of research in binocular vision and practical methods from clinical optometry to develop some technical guidelines for programming stereographic games that have the end user's comfort and safety in mind. This paper will provide generate strategies for user- centered implementation of 3D virtual worlds, as well as pictorial examples demonstrating a natural means for rendering stereographic imagery more comfortable to view in games employing first-person perspective.

48 CFR 815.404-1 - Proposal analysis techniques.

Code of Federal Regulations, 2010 CFR

2010-10-01

... technical reviews. (See 801.602-70.) (b) Contracting officers determine the level of technical analyses... under them, and contract modifications. Contracting officers must request technical analyses of the proposals from the appropriate technical personnel. The technical analyses must address, as a minimum, the...

48 CFR 815.404-1 - Proposal analysis techniques.

Code of Federal Regulations, 2011 CFR

2011-10-01

... technical reviews. (See 801.602-70.) (b) Contracting officers determine the level of technical analyses... under them, and contract modifications. Contracting officers must request technical analyses of the proposals from the appropriate technical personnel. The technical analyses must address, as a minimum, the...

Testing of CMA-2000 Microwave Landing System (MLS) airborne receiver

NASA Astrophysics Data System (ADS)

Labreche, L.; Murfin, A. J.

1989-09-01

Microwave landing system (MLS) is a precision approach and landing guidance system which provides position information and various air to ground data. Position information is provided on a wide coverage sector and is determined by an azimuth angle measurement, an elevation angle measurement, and a range measurement. MLS performance standards and testing of the MLS airborne receiver is mainly governed by Technical Standard Order TSO-C104 issued by the Federal Aviation Administration. This TSO defines detailed test procedures for use in determining the required performance under standard and stressed conditions. It also imposes disciplines on software development and testing procedures. Testing performed on the CMA-2000 MLS receiver and methods used in its validation are described. A computer automated test system has been developed to test for compliance with RTCA/DO-177 Minimum Operation Performance Standards. Extensive software verification and traceability tests designed to ensure compliance with RTCA/DO-178 are outlined.

Assessing Technical Performance and Determining the Learning Curve in Cleft Palate Surgery Using a High-Fidelity Cleft Palate Simulator.

PubMed

Podolsky, Dale J; Fisher, David M; Wong Riff, Karen W; Szasz, Peter; Looi, Thomas; Drake, James M; Forrest, Christopher R

2018-06-01

This study assessed technical performance in cleft palate repair using a newly developed assessment tool and high-fidelity cleft palate simulator through a longitudinal simulation training exercise. Three residents performed five and one resident performed nine consecutive endoscopically recorded cleft palate repairs using a cleft palate simulator. Two fellows in pediatric plastic surgery and two expert cleft surgeons also performed recorded simulated repairs. The Cleft Palate Objective Structured Assessment of Technical Skill (CLOSATS) and end-product scales were developed to assess performance. Two blinded cleft surgeons assessed the recordings and the final repairs using the CLOSATS, end-product scale, and a previously developed global rating scale. The average procedure-specific (CLOSATS), global rating, and end-product scores increased logarithmically after each successive simulation session for the residents. Reliability of the CLOSATS (average item intraclass correlation coefficient (ICC), 0.85 ± 0.093) and global ratings (average item ICC, 0.91 ± 0.02) among the raters was high. Reliability of the end-product assessments was lower (average item ICC, 0.66 ± 0.15). Standard setting linear regression using an overall cutoff score of 7 of 10 corresponded to a pass score for the CLOSATS and the global score of 44 (maximum, 60) and 23 (maximum, 30), respectively. Using logarithmic best-fit curves, 6.3 simulation sessions are required to reach the minimum standard. A high-fidelity cleft palate simulator has been developed that improves technical performance in cleft palate repair. The simulator and technical assessment scores can be used to determine performance before operating on patients.

5 CFR 551.601 - Minimum age standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 1 2011-01-01 2011-01-01 false Minimum age standards. 551.601 Section... ADMINISTRATION UNDER THE FAIR LABOR STANDARDS ACT Child Labor § 551.601 Minimum age standards. (a) 16-year minimum age. The Act, in section 3(l), sets a general 16-year minimum age, which applies to all employment...

5 CFR 551.601 - Minimum age standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 1 2014-01-01 2014-01-01 false Minimum age standards. 551.601 Section... ADMINISTRATION UNDER THE FAIR LABOR STANDARDS ACT Child Labor § 551.601 Minimum age standards. (a) 16-year minimum age. The Act, in section 3(l), sets a general 16-year minimum age, which applies to all employment...

5 CFR 551.601 - Minimum age standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 1 2013-01-01 2013-01-01 false Minimum age standards. 551.601 Section... ADMINISTRATION UNDER THE FAIR LABOR STANDARDS ACT Child Labor § 551.601 Minimum age standards. (a) 16-year minimum age. The Act, in section 3(l), sets a general 16-year minimum age, which applies to all employment...

5 CFR 551.601 - Minimum age standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 1 2012-01-01 2012-01-01 false Minimum age standards. 551.601 Section... ADMINISTRATION UNDER THE FAIR LABOR STANDARDS ACT Child Labor § 551.601 Minimum age standards. (a) 16-year minimum age. The Act, in section 3(l), sets a general 16-year minimum age, which applies to all employment...

Payload transportation system study

NASA Technical Reports Server (NTRS)

1976-01-01

A standard size set of shuttle payload transportation equipment was defined that will substantially reduce the cost of payload transportation and accommodate a wide range of payloads with minimum impact on payload design. The system was designed to accommodate payload shipments between the level 4 payload integration sites and the launch site during the calendar years 1979-1982. In addition to defining transportation multi-use mission support equipment (T-MMSE) the mode of travel, prime movers, and ancillary equipment required in the transportation process were also considered. Consistent with the STS goals of low cost and the use of standardized interfaces, the transportation system was designed to commercial grade standards and uses the payload flight mounting interfaces for transportation. The technical, cost, and programmatic data required to permit selection of a baseline system of MMSE for intersite movement of shuttle payloads were developed.

DC-9/JT8D refan, Phase 1. [technical and economic feasibility of retrofitting DC-9 aircraft with refan engine to achieve desired acoustic levels

NASA Technical Reports Server (NTRS)

1973-01-01

Analyses and design studies were conducted on the technical and economic feasibility of installing the JT8D-109 refan engine on the DC-9 aircraft. Design criteria included minimum change to the airframe to achieve desired acoustic levels. Several acoustic configurations were studied with two selected for detailed investigations. The minimum selected acoustic treatment configuration results in an estimated aircraft weight increase of 608 kg (1,342 lb) and the maximum selected acoustic treatment configuration results in an estimated aircraft weight increase of 809 kg (1,784 lb). The range loss for the minimum and maximum selected acoustic treatment configurations based on long range cruise at 10 668 m (35,000 ft) altitude with a typical payload of 6 804 kg (15,000 lb) amounts to 54 km (86 n. mi.) respectively. Estimated reduction in EPNL's for minimum selected treatment show 8 EPNdB at approach, 12 EPNdB for takeoff with power cutback, 15 EPNdB for takeoff without power cutback and 12 EPNdB for sideline using FAR Part 36. Little difference was estimated in EPNL between minimum and maximum treatments due to reduced performance of maximum treatment. No major technical problems were encountered in the study. The refan concept for the DC-9 appears technically feasible and economically viable at approximately $1,000,000 per airplane. An additional study of the installation of JT3D-9 refan engine on the DC-8-50/61 and DC-8-62/63 aircraft is included. Three levels of acoustic treatment were suggested for DC-8-50/61 and two levels for DC-8-62/63. Results indicate the DC-8 technically can be retrofitted with refan engines for approximately $2,500,000 per airplane.

Health information technology: standards, implementation specifications, and certification criteria for electronic health record technology, 2014 edition; revisions to the permanent certification program for health information technology. Final rule.

PubMed

2012-09-04

With this final rule, the Secretary of Health and Human Services adopts certification criteria that establish the technical capabilities and specify the related standards and implementation specifications that Certified Electronic Health Record (EHR) Technology will need to include to, at a minimum, support the achievement of meaningful use by eligible professionals, eligible hospitals, and critical access hospitals under the Medicare and Medicaid EHR Incentive Programs beginning with the EHR reporting periods in fiscal year and calendar year 2014. This final rule also makes changes to the permanent certification program for health information technology, including changing the program's name to the ONC HIT Certification Program.

75 FR 20671 - Seventieth Meeting: RTCA Special Committee 147: Minimum Operational Performance Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-20

... Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems... Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems... RTCA Special Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision...

5 CFR 890.202 - Minimum standards for health benefits carriers.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 2 2012-01-01 2012-01-01 false Minimum standards for health benefits... SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Health Benefits Plans § 890.202 Minimum standards for health benefits carriers. The minimum standards for health benefits carriers for the...

5 CFR 890.202 - Minimum standards for health benefits carriers.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 2 2011-01-01 2011-01-01 false Minimum standards for health benefits... SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Health Benefits Plans § 890.202 Minimum standards for health benefits carriers. The minimum standards for health benefits carriers for the...

76 FR 11846 - Seventy-second Meeting: RTCA Special Committee 147: Minimum Operational Performance Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-03

... Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems... Committee 147 meeting: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance... RTCA Special Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision...

75 FR 52590 - Seventy-First Meeting: RTCA Special Committee 147: Minimum Operational Performance Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-26

... Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems... Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems... RTCA Special Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision...

76 FR 58077 - Seventy-Third Meeting: RTCA Special Committee 147: Minimum Operational Performance Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-19

... Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems... Committee 147 meeting: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance... RTCA Special Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision...

Performance measures for lower gastrointestinal endoscopy: a European Society of Gastrointestinal Endoscopy (ESGE) quality improvement initiative

PubMed Central

Thomas-Gibson, Siwan; Bugajski, Marek; Bretthauer, Michael; Rees, Colin J; Dekker, Evelien; Hoff, Geir; Jover, Rodrigo; Suchanek, Stepan; Ferlitsch, Monika; Anderson, John; Roesch, Thomas; Hultcranz, Rolf; Racz, Istvan; Kuipers, Ernst J; Garborg, Kjetil; East, James E; Rupinski, Maciej; Seip, Birgitte; Bennett, Cathy; Senore, Carlo; Minozzi, Silvia; Bisschops, Raf; Domagk, Dirk; Valori, Roland; Spada, Cristiano; Hassan, Cesare; Dinis-Ribeiro, Mario; Rutter, Matthew D

2017-01-01

The European Society of Gastrointestinal Endoscopy and United European Gastroenterology present a short list of key performance measures for lower gastrointestinal endoscopy. We recommend that endoscopy services across Europe adopt the following seven key performance measures for lower gastrointestinal endoscopy for measurement and evaluation in daily practice at a center and endoscopist level: 1 rate of adequate bowel preparation (minimum standard 90%); 2 cecal intubation rate (minimum standard 90%); 3 adenoma detection rate (minimum standard 25%); 4 appropriate polypectomy technique (minimum standard 80%); 5 complication rate (minimum standard not set); 6 patient experience (minimum standard not set); 7 appropriate post-polypectomy surveillance recommendations (minimum standard not set). Other identified performance measures have been listed as less relevant based on an assessment of their importance, scientific acceptability, feasibility, usability, and comparison to competing measures. PMID:28507745

24 CFR 200.933 - Changes in minimum property standards.

Code of Federal Regulations, 2010 CFR

2010-04-01

... Register. As the changes are made, they will be incorporated into the volumes of the Minimum Property... 24 Housing and Urban Development 2 2010-04-01 2010-04-01 false Changes in minimum property... Changes in minimum property standards. Changes in the Minimum Property Standards will generally be made...

24 CFR 200.933 - Changes in minimum property standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Register. As the changes are made, they will be incorporated into the volumes of the Minimum Property... 24 Housing and Urban Development 2 2011-04-01 2011-04-01 false Changes in minimum property... Changes in minimum property standards. Changes in the Minimum Property Standards will generally be made...

75 FR 37825 - Notice of Proposed Information Collection: Comment Request; Minimum Property Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-30

... Information Collection: Comment Request; Minimum Property Standards for Multifamily and Care-Type Facilities...: Minimum Property Standards for Multifamily and Care-type facilities. OMB Control Number, if applicable... Housing and Urban Development (HUD) developed the Minimum Property Standards (MPS) program in order to...

7 CFR 953.43 - Minimum standards of quality.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 8 2010-01-01 2010-01-01 false Minimum standards of quality. 953.43 Section 953.43... SOUTHEASTERN STATES Order Regulating Handling Regulations § 953.43 Minimum standards of quality. (a) Recommendation. Whenever the committee deems it advisable to establish and maintain minimum standards of quality...

7 CFR 953.43 - Minimum standards of quality.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 8 2013-01-01 2013-01-01 false Minimum standards of quality. 953.43 Section 953.43... SOUTHEASTERN STATES Order Regulating Handling Regulations § 953.43 Minimum standards of quality. (a) Recommendation. Whenever the committee deems it advisable to establish and maintain minimum standards of quality...

7 CFR 953.43 - Minimum standards of quality.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 8 2011-01-01 2011-01-01 false Minimum standards of quality. 953.43 Section 953.43... SOUTHEASTERN STATES Order Regulating Handling Regulations § 953.43 Minimum standards of quality. (a) Recommendation. Whenever the committee deems it advisable to establish and maintain minimum standards of quality...

7 CFR 953.43 - Minimum standards of quality.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 8 2014-01-01 2014-01-01 false Minimum standards of quality. 953.43 Section 953.43... SOUTHEASTERN STATES Order Regulating Handling Regulations § 953.43 Minimum standards of quality. (a) Recommendation. Whenever the committee deems it advisable to establish and maintain minimum standards of quality...

7 CFR 953.43 - Minimum standards of quality.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 8 2012-01-01 2012-01-01 false Minimum standards of quality. 953.43 Section 953.43... SOUTHEASTERN STATES Order Regulating Handling Regulations § 953.43 Minimum standards of quality. (a) Recommendation. Whenever the committee deems it advisable to establish and maintain minimum standards of quality...

25 CFR 36.20 - Standard V-Minimum academic programs/school calendar.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true Standard V-Minimum academic programs/school calendar. 36... ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum Program of Instruction § 36.20 Standard V—Minimum academic programs/school calendar. (a...

25 CFR 36.20 - Standard V-Minimum academic programs/school calendar.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false Standard V-Minimum academic programs/school calendar. 36... ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum Program of Instruction § 36.20 Standard V—Minimum academic programs/school calendar. (a...

25 CFR 36.20 - Standard V-Minimum academic programs/school calendar.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false Standard V-Minimum academic programs/school calendar. 36... ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum Program of Instruction § 36.20 Standard V—Minimum academic programs/school calendar. (a...

Design of Standards and Labeling programs in Chile: Techno-Economic Analysis for Refrigerators

DOE Office of Scientific and Technical Information (OSTI.GOV)

Letschert, Virginie E.; McNeil, Michael A.; Pavon, Mariana

2013-05-01

Lawrence Berkeley National Laboratory is a global leader in the study of energy efficiency and its effective implementation through government policy. The Energy Analysis and Environmental Impacts Department of LBNL’s Environmental Energy Technologies Division provides technical assistance to help federal, stat e and local government agencies in the United States, and throughout the world, develop long-term strategies, policy, and programs to encourage energy efficiency in all sectors and industries. In the past, LBNL has assisted staff of various countries government agencies and their con tractors in providing methodologies to analyze cost-effectiveness of regulations and asses s overall national impacts ofmore » efficiency programs. The paper presents the work done in collaboration with the Ministry of Energy (MoE) in Chile and the Collaborative Labeling Appliance Standards Programs (CLASP) on designing a Minimum Energy Performance Standards (MEPS) and ext ending the current labeling program for refrigerators.« less

Designing testing service at baristand industri Medan’s liquid waste laboratory

NASA Astrophysics Data System (ADS)

Kusumawaty, Dewi; Napitupulu, Humala L.; Sembiring, Meilita T.

2018-03-01

Baristand Industri Medan is a technical implementation unit under the Industrial and Research and Development Agency, the Ministry of Industry. One of the services often used in Baristand Industri Medan is liquid waste testing service. The company set the standard of service is nine working days for testing services. At 2015, 89.66% on testing services liquid waste does not meet the specified standard of services company because of many samples accumulated. The purpose of this research is designing online services to schedule the coming the liquid waste sample. The method used is designing an information system that consists of model design, output design, input design, database design and technology design. The results of designing information system of testing liquid waste online consist of three pages are pages to the customer, the recipient samples and laboratory. From the simulation results with scheduled samples, then the standard services a minimum of nine working days can be reached.

Blurred digital mammography images: an analysis of technical recall and observer detection performance.

PubMed

Ma, Wang Kei; Borgen, Rita; Kelly, Judith; Millington, Sara; Hilton, Beverley; Aspin, Rob; Lança, Carla; Hogg, Peter

2017-03-01

Blurred images in full-field digital mammography are a problem in the UK Breast Screening Programme. Technical recalls may be due to blurring not being seen on lower resolution monitors used for review. This study assesses the visual detection of blurring on a 2.3-MP monitor and a 5-MP report grade monitor and proposes an observer standard for the visual detection of blurring on a 5-MP reporting grade monitor. 28 observers assessed 120 images for blurring; 20 images had no blurring present, whereas 100 images had blurring imposed through mathematical simulation at 0.2, 0.4, 0.6, 0.8 and 1.0 mm levels of motion. Technical recall rate for both monitors and angular size at each level of motion were calculated. χ 2 tests were used to test whether significant differences in blurring detection existed between 2.3- and 5-MP monitors. The technical recall rate for 2.3- and 5-MP monitors are 20.3% and 9.1%, respectively. The angular size for 0.2- to 1-mm motion varied from 55 to 275 arc s. The minimum amount of motion for visual detection of blurring in this study is 0.4 mm. For 0.2-mm simulated motion, there was no significant difference [χ 2 (1, N = 1095) = 1.61, p = 0.20] in blurring detection between the 2.3- and 5-MP monitors. According to this study, monitors ≤2.3 MP are not suitable for technical review of full-field digital mammography images for the detection of blur. Advances in knowledge: This research proposes the first observer standard for the visual detection of blurring.

Blurred digital mammography images: an analysis of technical recall and observer detection performance

PubMed Central

Borgen, Rita; Kelly, Judith; Millington, Sara; Hilton, Beverley; Aspin, Rob; Lança, Carla; Hogg, Peter

2017-01-01

Objective: Blurred images in full-field digital mammography are a problem in the UK Breast Screening Programme. Technical recalls may be due to blurring not being seen on lower resolution monitors used for review. This study assesses the visual detection of blurring on a 2.3-MP monitor and a 5-MP report grade monitor and proposes an observer standard for the visual detection of blurring on a 5-MP reporting grade monitor. Methods: 28 observers assessed 120 images for blurring; 20 images had no blurring present, whereas 100 images had blurring imposed through mathematical simulation at 0.2, 0.4, 0.6, 0.8 and 1.0 mm levels of motion. Technical recall rate for both monitors and angular size at each level of motion were calculated. χ2 tests were used to test whether significant differences in blurring detection existed between 2.3- and 5-MP monitors. Results: The technical recall rate for 2.3- and 5-MP monitors are 20.3% and 9.1%, respectively. The angular size for 0.2- to 1-mm motion varied from 55 to 275 arc s. The minimum amount of motion for visual detection of blurring in this study is 0.4 mm. For 0.2-mm simulated motion, there was no significant difference [χ2 (1, N = 1095) = 1.61, p = 0.20] in blurring detection between the 2.3- and 5-MP monitors. Conclusion: According to this study, monitors ≤2.3 MP are not suitable for technical review of full-field digital mammography images for the detection of blur. Advances in knowledge: This research proposes the first observer standard for the visual detection of blurring. PMID:28134567

78 FR 21060 - Appeal Proceedings Before the Commission

Federal Register 2010, 2011, 2012, 2013, 2014

2013-04-09

... adoption of alternate standards from those required by the Commission's minimum internal control standards... adoption of alternate standards from those required by the Commission's minimum internal control standards... TGRAs' adoption of alternate standards from those required by the Commission's minimum internal control...

48 CFR 315.305 - Proposal evaluation.

Code of Federal Regulations, 2010 CFR

2010-10-01

... following elements: (1) An explanation of the evaluation process and the role of evaluators throughout the... include, at a minimum, the following elements: (1) A list of recommended technical evaluation panel... that the technical evaluation will have in the award decision. (2) The technical evaluation process...

Incorporating simulation in vascular surgery education.

PubMed

Bismuth, Jean; Donovan, Michael A; O'Malley, Marcia K; El Sayed, Hosam F; Naoum, Joseph J; Peden, Eric K; Davies, Mark G; Lumsden, Alan B

2010-10-01

The traditional apprenticeship model introduced by Halsted of "learning by doing" may just not be valid in the modern practice of vascular surgery. The model is often criticized for being somewhat unstructured because a resident's experience is based on what comes through the "door." In an attempt to promote uniformity of training, multiple national organizations are currently delineating standard curricula for each trainee to govern the knowledge and cases required in a vascular residency. However, the outcomes are anything but uniform. This means that we graduate vascular specialists with a surprisingly wide spectrum of abilities. Use of simulation may benefit trainees in attaining a level of technical expertise that will benefit themselves and their patients. Furthermore, there is likely a need to establish a simulation-based certification process for graduating trainees to further ascertain minimum technical abilities. Copyright © 2010 Society for Vascular Surgery. Published by Mosby, Inc. All rights reserved.

25 CFR 542.14 - What are the minimum internal control standards for the cage?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for the cage? 542.14 Section 542.14 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.14 What are the minimum internal control standards for the cage? (a) Computer applications. For...

25 CFR 543.8 - What are the minimum internal control standards for bingo?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for bingo? 543.8 Section 543.8 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.8 What are the minimum internal control standards for bingo? (a) Supervision....

25 CFR 542.17 - What are the minimum internal control standards for complimentary services or items?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are the minimum internal control standards for complimentary services or items? 542.17 Section 542.17 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.17 What are the minimum internal control standards for complimentary...

25 CFR 542.17 - What are the minimum internal control standards for complimentary services or items?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false What are the minimum internal control standards for complimentary services or items? 542.17 Section 542.17 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.17 What are the minimum internal control standards for complimentary...

25 CFR 542.17 - What are the minimum internal control standards for complimentary services or items?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for complimentary services or items? 542.17 Section 542.17 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.17 What are the minimum internal control standards for complimentary...

25 CFR 543.8 - What are the minimum internal control standards for bingo?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for bingo? 543.8 Section 543.8 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.8 What are the minimum internal control standards for bingo? (a) Supervision....

25 CFR 542.17 - What are the minimum internal control standards for complimentary services or items?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for complimentary services or items? 542.17 Section 542.17 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.17 What are the minimum internal control standards for complimentary...

25 CFR 542.8 - What are the minimum internal control standards for pull tabs?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for pull tabs? 542.8 Section 542.8 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.8 What are the minimum internal control standards for pull tabs? (a) Computer applications. For...

25 CFR 542.8 - What are the minimum internal control standards for pull tabs?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for pull tabs? 542.8 Section 542.8 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.8 What are the minimum internal control standards for pull tabs? (a) Computer applications. For...

25 CFR 542.8 - What are the minimum internal control standards for pull tabs?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false What are the minimum internal control standards for pull tabs? 542.8 Section 542.8 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.8 What are the minimum internal control standards for pull tabs? (a) Computer applications. For...

77 FR 13831 - Health Information Technology: Standards, Implementation Specifications, and Certification...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-03-07

...Under section 3004 of the Public Health Service Act, the Secretary of Health and Human Services is proposing to revise the initial set of standards, implementation specifications, and certification criteria adopted in an interim final rule published on January 13, 2010, and a subsequent final rule that was published on July 28, 2010, as well as to adopt new standards, implementation specifications, and certification criteria. The proposed new and revised certification criteria would establish the technical capabilities and specify the related standards and implementation specifications that Certified Electronic Health Record (EHR) Technology would need to include to, at a minimum, support the achievement of meaningful use by eligible professionals, eligible hospitals, and critical access hospitals under the Medicare and Medicaid EHR Incentive Programs beginning with the EHR reporting periods in fiscal year and calendar year 2014. This notice of proposed rulemaking also proposes revisions to the permanent certification program for health information technology, which includes changing the program's name.

76 FR 78141 - Pilot, Flight Instructor, and Pilot School Certification; Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

... command under IFR or in weather conditions less than the minimums prescribed for VFR. Finally, this... pilot in command under IFR or in weather conditions less than the minimums prescribed for VFR. Under... command under IFR or in weather conditions less than the minimums prescribed for VFR. In the 2009 final...

24 CFR 200.925a - Multifamily and care-type minimum property standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

24 CFR 200.925a - Multifamily and care-type minimum property standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

24 CFR 200.925a - Multifamily and care-type minimum property standards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

24 CFR 200.925a - Multifamily and care-type minimum property standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Standards § 200.925a Multifamily and care-type minimum property standards. (a) Construction standards. Multifamily or care-type properties shall comply with the minimum property standards contained in the handbook.... If the developer or other interested party so chooses, then the multifamily or care-type property...

78 FR 69928 - First Meeting: RTCA Special Committee 228-Minimum Operational Performance Standards for Unmanned...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-21

... 228--Minimum Operational Performance Standards for Unmanned Aircraft Systems AGENCY: Federal Aviation...--Minimum Operational Performance Standards for Unmanned Aircraft Systems. SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 228--Minimum Operational Performance...

78 FR 38093 - First Meeting: RTCA Special Committee 228-Minimum Operational Performance Standards for Unmanned...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-06-25

... 228--Minimum Operational Performance Standards for Unmanned Aircraft Systems AGENCY: Federal Aviation...--Minimum Operational Performance Standards for Unmanned Aircraft Systems. SUMMARY: The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 228--Minimum Operational Performance...

12 CFR 564.4 - Minimum appraisal standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Minimum appraisal standards. 564.4 Section 564.4 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY APPRAISALS § 564.4 Minimum appraisal standards. For federally related transactions, all appraisals shall, at a minimum: (a...

25 CFR 543.17 - What are the minimum internal control standards for drop and count?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for drop and count? 543.17 Section 543.17 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.17 What are the minimum internal control standards for drop and count?...

25 CFR 543.15 - What are the minimum internal control standards for lines of credit?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for lines of credit? 543.15 Section 543.15 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.15 What are the minimum internal control standards for lines of credi...

25 CFR 542.32 - What are the minimum internal control standards for internal audit for Tier B gaming operations?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for internal audit for Tier B gaming operations? 542.32 Section 542.32 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.32 What are the minimum internal control standards for...

25 CFR 543.9 - What are the minimum internal control standards for pull tabs?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for pull tabs? 543.9 Section 543.9 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.9 What are the minimum internal control standards for pull tabs? (a)...

25 CFR 542.22 - What are the minimum internal control standards for internal audit for Tier A gaming operations?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false What are the minimum internal control standards for internal audit for Tier A gaming operations? 542.22 Section 542.22 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.22 What are the minimum internal control standards for...

25 CFR 542.22 - What are the minimum internal control standards for internal audit for Tier A gaming operations?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for internal audit for Tier A gaming operations? 542.22 Section 542.22 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.22 What are the minimum internal control standards for...

25 CFR 543.13 - What are the minimum internal control standards for complimentary services or items?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for complimentary services or items? 543.13 Section 543.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.13 What are the minimum internal control standards fo...

25 CFR 542.22 - What are the minimum internal control standards for internal audit for Tier A gaming operations?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for internal audit for Tier A gaming operations? 542.22 Section 542.22 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.22 What are the minimum internal control standards for...

25 CFR 542.22 - What are the minimum internal control standards for internal audit for Tier A gaming operations?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are the minimum internal control standards for internal audit for Tier A gaming operations? 542.22 Section 542.22 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.22 What are the minimum internal control standards for...

25 CFR 542.32 - What are the minimum internal control standards for internal audit for Tier B gaming operations?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false What are the minimum internal control standards for internal audit for Tier B gaming operations? 542.32 Section 542.32 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.32 What are the minimum internal control standards for...

25 CFR 543.9 - What are the minimum internal control standards for pull tabs?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for pull tabs? 543.9 Section 543.9 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.9 What are the minimum internal control standards for pull tabs? (a)...

25 CFR 543.15 - What are the minimum internal control standards for lines of credit?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for lines of credit? 543.15 Section 543.15 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.15 What are the minimum internal control standards for lines of credi...

25 CFR 543.17 - What are the minimum internal control standards for drop and count?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for drop and count? 543.17 Section 543.17 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.17 What are the minimum internal control standards for drop and count?...

25 CFR 542.32 - What are the minimum internal control standards for internal audit for Tier B gaming operations?

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false What are the minimum internal control standards for internal audit for Tier B gaming operations? 542.32 Section 542.32 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.32 What are the minimum internal control standards for...

25 CFR 543.13 - What are the minimum internal control standards for complimentary services or items?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for complimentary services or items? 543.13 Section 543.13 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.13 What are the minimum internal control standards fo...

25 CFR 542.32 - What are the minimum internal control standards for internal audit for Tier B gaming operations?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for internal audit for Tier B gaming operations? 542.32 Section 542.32 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.32 What are the minimum internal control standards for...

77 FR 58707 - Minimum Internal Control Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-21

... Gaming Commission 25 CFR Part 543 Minimum Internal Control Standards; Final Rule #0;#0;Federal Register... Control Standards AGENCY: National Indian Gaming Commission, Interior. ACTION: Final rule. SUMMARY: The National Indian Gaming Commission (NIGC) amends its minimum internal control standards for Class II gaming...

78 FR 11793 - Minimum Internal Control Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-02-20

... Internal Control Standards AGENCY: National Indian Gaming Commission. ACTION: Proposed rule. SUMMARY: The National Indian Gaming Commission (NIGC) proposes to amend its minimum internal control standards for Class... NIGC published a final rule in the Federal Register called Minimum Internal Control Standards. 64 FR...

Requirements and Techniques for Developing and Measuring Simulant Materials

NASA Technical Reports Server (NTRS)

Rickman, Doug; Owens, Charles; Howard, Rick

2006-01-01

The 1989 workshop report entitled Workshop on Production and Uses of Simulated Lunar Materials and the Lunar Regolith Simulant Materials: Recommendations for Standardization, Production, and Usage, NASA Technical Publication identify and reinforced a need for a set of standards and requirements for the production and usage of the lunar simulant materials. As NASA need prepares to return to the moon, a set of requirements have been developed for simulant materials and methods to produce and measure those simulants have been defined. Addressed in the requirements document are: 1) a method for evaluating the quality of any simulant of a regolith, 2) the minimum Characteristics for simulants of lunar regolith, and 3) a method to produce lunar regolith simulants needed for NASA's exploration mission. A method to evaluate new and current simulants has also been rigorously defined through the mathematics of Figures of Merit (FoM), a concept new to simulant development. A single FoM is conceptually an algorithm defining a single characteristic of a simulant and provides a clear comparison of that characteristic for both the simulant and a reference material. Included as an intrinsic part of the algorithm is a minimum acceptable performance for the characteristic of interest. The algorithms for the FoM for Standard Lunar Regolith Simulants are also explicitly keyed to a recommended method to make lunar simulants.

77 FR 32444 - Minimum Internal Control Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-01

... Internal Control Standards AGENCY: National Indian Gaming Commission. ACTION: Proposed rule. SUMMARY: The National Indian Gaming Commission (NIGC) proposes to amend its minimum internal control standards for Class... the Federal Register called Minimum Internal Control Standards. 64 FR 590. The rule added a new part...

Consortia Formation and Characteristics under the "Carl D. Perkins Career and Technical Education Act of 2006"

ERIC Educational Resources Information Center

Staklis, Sandra; Klein, Steve

2014-01-01

The "Carl D. Perkins Career and Technical Education Act of 2006" ("Perkins IV") sets a minimum allocation requirement that secondary and postsecondary career and technical education (CTE) subgrantees must achieve to receive federal financing. An eligible recipient with an allocation below the funding threshold may obtain a…

THE “NURSING CRISIS”

PubMed Central

McVeagh, Thos. C.

1949-01-01

Three concrete proposals are made for the improvement of the present nursing situation: 1. Make nursing education more easily available by holding the prerequisites to a minimum and concentrating upon the real essentials of nursing, granting the student the R.N. degree when she has completed this basic and essential training. 2. Utilize more fully the principles of group nursing as applied to “specialing” whether in the home or in the hospital. 3. Completely avoid the use of sub-standard nurses, while furnishing to the nurse such non-technical service (through the use of maid assistants or others) as shall make practicable the complete utilization of her skill and training. PMID:18144757

Professional technical standards in colleges and schools of pharmacy.

PubMed

Berry, Tricia M; Chichester, Clinton O; Lundquist, Lisa M; Sanoski, Cynthia A; Woodward, Donald A; Worley, Marcia M; Early, Johnnie L

2011-04-11

To determine the prevalence, characteristics, and use of professional technical standards among colleges and schools of pharmacy accredited by the Accreditation Council for Pharmacy Education (ACPE). The Web site of every college and school of pharmacy accredited by ACPE was searched to identify information regarding the availability, content, and use of technical standards and to obtain demographic information. Information was obtained from all of the 114 colleges and schools of pharmacy and 67 (59%) had technical standards in place. Common themes for technical standards were: observation; communication; motor; intellectual, conceptual, integrative and quantitative abilities; and behavioral and social attributes. Of those colleges and schools with technical standards, 61 (91%) had standards that addressed all 5 of these themes and 34 (51%) specified that the technical standards were used in their admission, progression, and graduation procedures. More than half of the colleges and schools of pharmacy examined in this study have technical standards; however, 41% have yet to develop and implement them. Colleges and schools of pharmacy looking for guidance in technical standards development could use the technical standards themes identified in this study.

Professional Technical Standards in Colleges and Schools of Pharmacy

PubMed Central

Berry, Tricia M.; Chichester, Clinton O.; Sanoski, Cynthia A.; Woodward, Donald A.; Worley, Marcia M.; Early, Johnnie L.

2011-01-01

Objective To determine the prevalence, characteristics, and use of professional technical standards among colleges and schools of pharmacy accredited by the Accreditation Council for Pharmacy Education (ACPE). Methods The Web site of every college and school of pharmacy accredited by ACPE was searched to identify information regarding the availability, content, and use of technical standards and to obtain demographic information. Results Information was obtained from all of the 114 colleges and schools of pharmacy and 67 (59%) had technical standards in place. Common themes for technical standards were: observation; communication; motor; intellectual, conceptual, integrative and quantitative abilities; and behavioral and social attributes. Of those colleges and schools with technical standards, 61 (91%) had standards that addressed all 5 of these themes and 34 (51%) specified that the technical standards were used in their admission, progression, and graduation procedures. Conclusion More than half of the colleges and schools of pharmacy examined in this study have technical standards; however, 41% have yet to develop and implement them. Colleges and schools of pharmacy looking for guidance in technical standards development could use the technical standards themes identified in this study. PMID:21655404

DOE technical standards list: Department of Energy standards index

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

Training and technical assistance for compliance with beverage and physical activity components of New York City's regulations for early child care centers.

PubMed

Kakietek, Jakub; Dunn, Lillian; O'Dell, Sarah Abood; Jernigan, Jan; Kettel Khan, Laura

2014-10-16

In 2006, the New York City Department of Health and Mental Hygiene (DOHMH) passed regulations for child care centers that established standards for beverages provided to children and set a minimum amount of time for daily physical activity. DOHMH offered several types of training and technical assistance to support compliance with the regulations. This article analyzes the association between training and technical assistance provided and compliance with the regulations in a sample of 174 group child care centers. Compliance was measured by using a site inventory of beverages stored on premises and a survey of centers' teachers regarding the amount of physical activity provided. Training and technical assistance measures were based on the DOHMH records of training and technical assistance provided to the centers in the sample and on a survey of center directors. Ordinal logistic regression was used to assess the association between training and technical assistance measures and compliance with the regulations. Measures of training related to physical activity the center received: the number of staff members who participated in Sport, Play and Active Recreation for Kids (SPARK) and other training programs in which a center participated were associated with better compliance with the physical activity regulations. Neither training nor technical assistance were associated with compliance with the regulations related to beverages. Increased compliance with regulations pertaining to physical activity was not related to compliance with beverage regulations. Future trainings should be targeted to the specific regulation requirements to increase compliance.

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 6 2012-01-01 2012-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 6 2014-01-01 2014-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 7 Agriculture 6 2011-01-01 2011-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

7 CFR 653.3 - Adaptation of technical standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 6 2013-01-01 2013-01-01 false Adaptation of technical standards. 653.3 Section 653.3..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.3 Adaptation of technical standards. Technical standards and criteria developed on a national basis may require special adaptation to meet local...

12 CFR 3.11 - Standards for determination of appropriate individual minimum capital ratios.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Standards for determination of appropriate individual minimum capital ratios. 3.11 Section 3.11 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY MINIMUM CAPITAL RATIOS; ISSUANCE OF DIRECTIVES Establishment of Minimum Capital Ratios for an Individual Bank § 3.11 Standards...

Progress on the Development of the UAS C2 Link and Supporting Spectrum - from LOS to BLOS

NASA Technical Reports Server (NTRS)

Kerczewski, Robert J.; Griner, James H.; Bishop, William D.; Matolak, David W.; Wilson, Jeffrey D.

2017-01-01

In order to provide for the safe integration of unmanned aircraft systems (UAS) into the National Airspace System, the control and non-payload communications (CNPC) link connecting the ground-based pilot with the unmanned aircraft must be highly reliable and robust, based upon standards that enable certification. Both line-of-sight (LOS) links using terrestrial-based communications and beyond-line-of-sight (BLOS) links using satellite communications are required to support UAS operations. The development of standards has been undertaken by RTCA Special Committee 228 (SC-228), with supporting technical data developed by NASA under the UAS in the National Airspace (NAS) Project. As a result of this work minimum operational performance standards (MOPS) have been completed and published for the LOS CNPC system. The second phase of work, for both NASA and RTCA involves the BLOS CNPC systems. The development of technical data to support MOPS development for UAS BLOS satellite-based CNPC links has now been initiated by NASA, and RTCA SC-228 has organized itself to begin the MOPS development process. This paper will provide an overview of the work that has been completed to date by the Communications Subproject in support of LOS C2 communications for UAS followed by an update of plans and progress for the BLOS phase of the project, with the focus on the UAS C2 spectrum aspects.

40 CFR 131.6 - Minimum requirements for water quality standards submission.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Minimum requirements for water quality standards submission. 131.6 Section 131.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS General Provisions § 131.6 Minimum requirements for water quality standards submission. The...

40 CFR 131.6 - Minimum requirements for water quality standards submission.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Minimum requirements for water quality standards submission. 131.6 Section 131.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS General Provisions § 131.6 Minimum requirements for water quality standards submission. The...

NASA Technical Standards Program and Implications for Lessons Learned and Technical Standard Integration

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Garcia, Danny; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The National Aeronautics and Space Agency consists of fourteen Facilities throughout the United States. They are organized to support the Agency's principal Enterprises: (1) Space Science, (2) Earth Science, (3) Aerospace Technology, (4) Human Exploration and Development of Space, and (5) Biological and Physical Research. Technical Standards are important to the activities of each Enterprise and have been an integral part in the development and operation of NASA Programs and Projects since the Agency was established in 1959. However, for years each Center was responsible for its own standards development and selection of non-NASA technical standards that met the needs of Programs and Projects for which they were responsible. There were few Agencywide applicable Technical Standards, mainly those in area of safety. Department of Defense Standards and Specifications were the foundation and main source for Technical Standards used by the Agency. This process existed until about 1997 when NASA embarked on a Program to convert NASA's Center-developed Technical Standards into Agencywide endorsed NASA Preferred Technical Standards. In addition, action was taken regarding the formal adoption of non-NASA Technical Standards (DOD, SAE, ASTM, ASME, IEEE, etc.) as NASA Preferred Technical Standards.

Minimum information about a single amplified genome (MISAG) and a metagenome-assembled genome (MIMAG) of bacteria and archaea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bowers, Robert M.; Kyrpides, Nikos C.; Stepanauskas, Ramunas

We present two standards developed by the Genomic Standards Consortium (GSC) for reporting bacterial and archaeal genome sequences. Both are extensions of the Minimum Information about Any (x) Sequence (MIxS). The standards are the Minimum Information about a Single Amplified Genome (MISAG) and the Minimum Information about a Metagenome-Assembled Genome (MIMAG), including, but not limited to, assembly quality, and estimates of genome completeness and contamination. These standards can be used in combination with other GSC checklists, including the Minimum Information about a Genome Sequence (MIGS), Minimum Information about a Metagenomic Sequence (MIMS), and Minimum Information about a Marker Gene Sequencemore » (MIMARKS). Community-wide adoption of MISAG and MIMAG will facilitate more robust comparative genomic analyses of bacterial and archaeal diversity.« less

Minimum information about a single amplified genome (MISAG) and a metagenome-assembled genome (MIMAG) of bacteria and archaea

DOE PAGES

Bowers, Robert M.; Kyrpides, Nikos C.; Stepanauskas, Ramunas; ...

2017-08-08

Here, we present two standards developed by the Genomic Standards Consortium (GSC) for reporting bacterial and archaeal genome sequences. Both are extensions of the Minimum Information about Any (x) Sequence (MIxS). The standards are the Minimum Information about a Single Amplified Genome (MISAG) and the Minimum Information about a MetagenomeAssembled Genome (MIMAG), including, but not limited to, assembly quality, and estimates of genome completeness and contamination. These standards can be used in combination with other GSC checklists, including the Minimum Information about a Genome Sequence (MIGS), Minimum Information about a Metagenomic Sequence (MIMS), and Minimum Information about a Marker Genemore » Sequence (MIMARKS). Community-wide adoption of MISAG and MIMAG will facilitate more robust comparative genomic analyses of bacterial and archaeal diversity.« less

Minimum information about a single amplified genome (MISAG) and a metagenome-assembled genome (MIMAG) of bacteria and archaea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bowers, Robert M.; Kyrpides, Nikos C.; Stepanauskas, Ramunas

Here, we present two standards developed by the Genomic Standards Consortium (GSC) for reporting bacterial and archaeal genome sequences. Both are extensions of the Minimum Information about Any (x) Sequence (MIxS). The standards are the Minimum Information about a Single Amplified Genome (MISAG) and the Minimum Information about a MetagenomeAssembled Genome (MIMAG), including, but not limited to, assembly quality, and estimates of genome completeness and contamination. These standards can be used in combination with other GSC checklists, including the Minimum Information about a Genome Sequence (MIGS), Minimum Information about a Metagenomic Sequence (MIMS), and Minimum Information about a Marker Genemore » Sequence (MIMARKS). Community-wide adoption of MISAG and MIMAG will facilitate more robust comparative genomic analyses of bacterial and archaeal diversity.« less

Review of PREPA Technical Requirements for Interconnecting Wind and Solar Generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gevorgian, Vahan; Booth, Sarah

2013-11-01

The Puerto Rico Electric Power Authority developed the minimum technical requirements for interconnection of wind turbine generation and photovoltaic power plants. NREL has conducted a review of these requirements based on generic technical aspects and electrical characteristics of wind and photovoltaic power plants, and on existing requirements from other utilities (both U.S. and European).

25 CFR 543.14 - What are the minimum internal control standards for patron deposit accounts and cashless systems?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for patron deposit accounts and cashless systems? 543.14 Section 543.14 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.14 What are the minimum internal control...

25 CFR 542.4 - How do these regulations affect minimum internal control standards established in a Tribal-State...

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false How do these regulations affect minimum internal control standards established in a Tribal-State compact? 542.4 Section 542.4 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.4 How do these regulations affect minimum internal...

25 CFR 542.4 - How do these regulations affect minimum internal control standards established in a Tribal-State...

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 2 2011-04-01 2011-04-01 false How do these regulations affect minimum internal control standards established in a Tribal-State compact? 542.4 Section 542.4 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.4 How do these regulations affect minimum internal...

25 CFR 543.12 - What are the minimum internal control standards for gaming promotions and player tracking systems?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for gaming promotions and player tracking systems? 543.12 Section 543.12 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.12 What are the minimum internal contro...

25 CFR 542.4 - How do these regulations affect minimum internal control standards established in a Tribal-State...

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false How do these regulations affect minimum internal control standards established in a Tribal-State compact? 542.4 Section 542.4 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.4 How do these regulations affect minimum internal...

25 CFR 542.4 - How do these regulations affect minimum internal control standards established in a Tribal-State...

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 2 2012-04-01 2012-04-01 false How do these regulations affect minimum internal control standards established in a Tribal-State compact? 542.4 Section 542.4 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.4 How do these regulations affect minimum internal...

25 CFR 543.14 - What are the minimum internal control standards for patron deposit accounts and cashless systems?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for patron deposit accounts and cashless systems? 543.14 Section 543.14 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.14 What are the minimum internal control...

25 CFR 542.4 - How do these regulations affect minimum internal control standards established in a Tribal-State...

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false How do these regulations affect minimum internal control standards established in a Tribal-State compact? 542.4 Section 542.4 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.4 How do these regulations affect minimum internal...

25 CFR 543.12 - What are the minimum internal control standards for gaming promotions and player tracking systems?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for gaming promotions and player tracking systems? 543.12 Section 543.12 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.12 What are the minimum internal contro...

7 CFR 652.2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF... public agencies certified by the Natural Resources Conservation Service (NRCS) to provide technical... meeting the minimum NRCS criteria for providing technical service for conservation planning or a specific...

7 CFR 652.2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF... public agencies certified by the Natural Resources Conservation Service (NRCS) to provide technical... meeting the minimum NRCS criteria for providing technical service for conservation planning or a specific...

7 CFR 652.2 - Definitions.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF... public agencies certified by the Natural Resources Conservation Service (NRCS) to provide technical... meeting the minimum NRCS criteria for providing technical service for conservation planning or a specific...

7 CFR 652.2 - Definitions.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF... public agencies certified by the Natural Resources Conservation Service (NRCS) to provide technical... meeting the minimum NRCS criteria for providing technical service for conservation planning or a specific...

76 FR 7096 - Minimum Quality and Handling Standards for Domestic and Imported Peanuts Marketed in the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-09

...). Accordingly, AMS published a notice of review and request for written comments on the Standards in the April...; FV10-996-610 Review] Minimum Quality and Handling Standards for Domestic and Imported Peanuts Marketed... the Minimum Quality and Handling Standards for Domestic and Imported Peanuts Marketed in the United...

49 CFR 536.9 - Use of credits with regard to the domestically manufactured passenger automobile minimum standard.

Code of Federal Regulations, 2012 CFR

2012-10-01

... manufactured passenger automobile minimum standard. 536.9 Section 536.9 Transportation Other Regulations... domestically manufactured passenger automobile minimum standard. (a) Each manufacturer is responsible for..., the domestically manufactured passenger automobile compliance category credit excess or shortfall is...

49 CFR 536.9 - Use of credits with regard to the domestically manufactured passenger automobile minimum standard.

Code of Federal Regulations, 2013 CFR

2013-10-01

... manufactured passenger automobile minimum standard. 536.9 Section 536.9 Transportation Other Regulations... domestically manufactured passenger automobile minimum standard. (a) Each manufacturer is responsible for..., the domestically manufactured passenger automobile compliance category credit excess or shortfall is...

49 CFR 536.9 - Use of credits with regard to the domestically manufactured passenger automobile minimum standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... manufactured passenger automobile minimum standard. 536.9 Section 536.9 Transportation Other Regulations... domestically manufactured passenger automobile minimum standard. (a) Each manufacturer is responsible for..., the domestically manufactured passenger automobile compliance category credit excess or shortfall is...

49 CFR 536.9 - Use of credits with regard to the domestically manufactured passenger automobile minimum standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... manufactured passenger automobile minimum standard. 536.9 Section 536.9 Transportation Other Regulations... domestically manufactured passenger automobile minimum standard. (a) Each manufacturer is responsible for..., the domestically manufactured passenger automobile compliance category credit excess or shortfall is...

49 CFR 536.9 - Use of credits with regard to the domestically manufactured passenger automobile minimum standard.

Code of Federal Regulations, 2014 CFR

2014-10-01

... manufactured passenger automobile minimum standard. 536.9 Section 536.9 Transportation Other Regulations... domestically manufactured passenger automobile minimum standard. (a) Each manufacturer is responsible for..., the domestically manufactured passenger automobile compliance category credit excess or shortfall is...

Development of NASA Technical Standards Program Relative to Enhancing Engineering Capabilities

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.

2003-01-01

The enhancement of engineering capabilities is an important aspect of any organization; especially those engaged in aerospace development activities. Technical Standards are one of the key elements of this endeavor. The NASA Technical Standards Program was formed in 1997 in response to the NASA Administrator s directive to develop an Agencywide Technical Standards Program. The Program s principal objective involved the converting Center-unique technical standards into Agency wide standards and the adoption/endorsement of non-Government technical standards in lieu of government standards. In the process of these actions, the potential for further enhancement of the Agency s engineering capabilities was noted relative to value of being able to access Agencywide the necessary full-text technical standards, standards update notifications, and integration of lessons learned with technical standards, all available to the user from one Website. This was accomplished and is now being enhanced based on feedbacks from the Agency's engineering staff and supporting contractors. This paper addresses the development experiences with the NASA Technical Standards Program and the enhancement of the Agency's engineering capabilities provided by the Program s products. Metrics are provided on significant aspects of the Program.

78 FR 41812 - Office of the Secretary of Transportation

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-11

... portfolio. 3. Provide a minimum of 20 hours of individual or group counseling sessions to small businesses... technical assistance, business training programs, business assessment, management training, counseling... activities such as information dissemination, small business counseling, and technical assistance with small...

77 FR 27490 - Plant-Specific Adoption, Revision 4 of the Improved Standard Technical Specifications

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-10

...,'' NUREG-1432, ``Standard Technical Specifications, Combustion Engineering Plants,'' NUREG-1433, ``Standard..., ``Standard Technical Specifications, Combustion Engineering Plants'' Revision 4, ADAMS Accession No..., Westinghouse Plants''.. NUREG-1432, ``Standard Technical ML12102A165 ML12102A169 Specifications, Combustion...

5 CFR 890.201 - Minimum standards for health benefits plans.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 5 Administrative Personnel 2 2011-01-01 2011-01-01 false Minimum standards for health benefits... SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Health Benefits Plans § 890.201 Minimum standards for health benefits plans. (a) To qualify for approval by OPM, a health benefits plan...

5 CFR 890.201 - Minimum standards for health benefits plans.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 5 Administrative Personnel 2 2012-01-01 2012-01-01 false Minimum standards for health benefits... SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Health Benefits Plans § 890.201 Minimum standards for health benefits plans. (a) To qualify for approval by OPM, a health benefits plan...

Using ISO 25040 standard for evaluating electronic health record systems.

PubMed

Oliveira, Marília; Novaes, Magdala; Vasconcelos, Alexandre

2013-01-01

Quality of electronic health record systems (EHR-S) is one of the key points in the discussion about the safe use of this kind of system. It stimulates creation of technical standards and certifications in order to establish the minimum requirements expected for these systems. [1] In other side, EHR-S suppliers need to invest in evaluation of their products to provide systems according to these requirements. This work presents a proposal of use ISO 25040 standard, which focuses on the evaluation of software products, for define a model of evaluation of EHR-S in relation to Brazilian Certification for Electronic Health Record Systems - SBIS-CFM Certification. Proposal instantiates the process described in ISO 25040 standard using the set of requirements that is scope of the Brazilian certification. As first results, this research has produced an evaluation model and a scale for classify an EHR-S about its compliance level in relation to certification. This work in progress is part for the acquisition of the degree of master in Computer Science at the Federal University of Pernambuco.

25 CFR 1000.396 - Does a Tribe/Consortium have additional ongoing requirements to maintain minimum standards for...

Code of Federal Regulations, 2010 CFR

2010-04-01

... requirements to maintain minimum standards for Tribe/Consortium management systems? 1000.396 Section 1000.396... AGREEMENTS UNDER THE TRIBAL SELF-GOVERNMENT ACT AMENDMENTS TO THE INDIAN SELF-DETERMINATION AND EDUCATION ACT... minimum standards for Tribe/Consortium management systems? Yes, the Tribe/Consortium must maintain...

75 FR 68814 - Notice of Submission of Proposed Information Collection to OMB Minimum Property Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-09

... Proposed Information Collection to OMB Minimum Property Standards for Multifamily and Care-Type Occupancy... Lists the Following Information Title of Proposal: Minimum Property Standards for Multifamily and Care-Type Occupancy Housing. OMB Approval Number: 2502-0321. Form Numbers: None. Description of the Need for...

Minimum information about a single amplified genome (MISAG) and a metagenome-assembled genome (MIMAG) of bacteria and archaea

USDA-ARS?s Scientific Manuscript database

We present two standards developed by the Genomic Standards Consortium (GSC) for reporting bacterial and archaeal genome sequences. Both are extensions of the minimum information about any (x) sequence (MIxS). The standards are the minimum information about a single amplified genome (MISAG) and the ...

76 FR 38463 - SAFE Mortgage Licensing Act: Minimum Licensing Standards and Oversight Responsibilities

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-30

... Parts 30 and 3400 SAFE Mortgage Licensing Act: Minimum Licensing Standards and Oversight... No. FR-5271-F-03] RIN 2502-A170 SAFE Mortgage Licensing Act: Minimum Licensing Standards and... pursuant to the Secure and Fair Enforcement Mortgage Licensing Act of 2008 (SAFE Act or Act), to ensure...

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, William W.; Parker, Nelson C. (Technical Monitor)

2002-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program's function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned-standards integration system. The Program maintains a 'one stop-shop' Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

NASA Technical Standards Program

NASA Technical Reports Server (NTRS)

Gill, Paul S.; Vaughan, WIlliam W.

2003-01-01

The NASA Technical Standards Program was officially established in 1997 as result of a directive issued by the Administrator. It is responsible for Agency wide technical standards development, adoption (endorsement), and conversion of Center-unique standards for Agency wide use. One major element of the Program is the review of NSA technical standards products and replacement with non-Government Voluntary Consensus Standards in accordance with directions issued by the Office of Management and Budget. As part of the Program s function, it developed a NASA Integrated Technical Standards Initiative that consists of and Agency wide full-text system, standards update notification system, and lessons learned - standards integration system. The Program maintains a "one stop-shop" Website for technical standards ad related information on aerospace materials, etc. This paper provides information on the development, current status, and plans for the NAS Technical Standards Program along with metrics on the utility of the products provided to both users within the nasa.gov Domain and the Public Domain.

State Minimum Competencies for High School Graduation. Technical Note.

ERIC Educational Resources Information Center

Lawlor, Joseph

This paper contains descriptions of mandated minimum competency programs in 13 states: Connecticut, Delaware, Georgia, Hawaii, Idaho, Kansas, Missouri, New Jersey, New York, North Carolina, South Carolina, Texas, and Vermont. Each description provides the skills assessed in the state, the assessment instruments used, and the overall purposes of…

25 CFR 547.16 - What are the minimum standards for game artwork, glass, and rules?

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum standards for game artwork, glass... the minimum standards for game artwork, glass, and rules? (a) Rules, instructions, and prize schedules...: (1) Game name, rules, and options such as the purchase or wager amount stated clearly and...

25 CFR 547.16 - What are the minimum standards for game artwork, glass, and rules?

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum standards for game artwork, glass... the minimum standards for game artwork, glass, and rules? (a) Rules, instructions, and prize schedules...: (1) Game name, rules, and options such as the purchase or wager amount stated clearly and...

12 CFR 366.12 - What are the FDIC's minimum standards of ethical responsibility?

Code of Federal Regulations, 2011 CFR

2011-01-01

... 12 Banks and Banking 4 2011-01-01 2011-01-01 false What are the FDIC's minimum standards of ethical responsibility? 366.12 Section 366.12 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION... § 366.12 What are the FDIC's minimum standards of ethical responsibility? (a) You and any person who...

48 CFR 22.1002-4 - Application of the Fair Labor Standards Act minimum wage.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Application of the Fair Labor Standards Act minimum wage. 22.1002-4 Section 22.1002-4 Federal Acquisition Regulations System... Service Contract Act of 1965, as Amended 22.1002-4 Application of the Fair Labor Standards Act minimum...

12 CFR 366.12 - What are the FDIC's minimum standards of ethical responsibility?

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 4 2010-01-01 2010-01-01 false What are the FDIC's minimum standards of ethical responsibility? 366.12 Section 366.12 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION... § 366.12 What are the FDIC's minimum standards of ethical responsibility? (a) You and any person who...

25 CFR 542.42 - What are the minimum internal control standards for internal audit for Tier C gaming operations?

Code of Federal Regulations, 2010 CFR

2010-04-01

... reconciliation process; (ii) Pull tabs, including but not limited to, statistical records, winner verification... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for... COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.42 What are...

12 CFR 366.12 - What are the FDIC's minimum standards of ethical responsibility?

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 5 2014-01-01 2014-01-01 false What are the FDIC's minimum standards of ethical responsibility? 366.12 Section 366.12 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION... § 366.12 What are the FDIC's minimum standards of ethical responsibility? (a) You and any person who...

12 CFR 366.12 - What are the FDIC's minimum standards of ethical responsibility?

Code of Federal Regulations, 2012 CFR

2012-01-01

... 12 Banks and Banking 5 2012-01-01 2012-01-01 false What are the FDIC's minimum standards of ethical responsibility? 366.12 Section 366.12 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION... § 366.12 What are the FDIC's minimum standards of ethical responsibility? (a) You and any person who...

12 CFR 366.12 - What are the FDIC's minimum standards of ethical responsibility?

Code of Federal Regulations, 2013 CFR

2013-01-01

... 12 Banks and Banking 5 2013-01-01 2013-01-01 false What are the FDIC's minimum standards of ethical responsibility? 366.12 Section 366.12 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION... § 366.12 What are the FDIC's minimum standards of ethical responsibility? (a) You and any person who...

25 CFR 543.23 - What are the minimum internal control standards for audit and accounting?

Code of Federal Regulations, 2014 CFR

2014-04-01

... supervision, bingo cards, bingo card sales, draw, prize payout; cash and equivalent controls, technologic aids... 25 Indians 2 2014-04-01 2014-04-01 false What are the minimum internal control standards for audit... INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.23 What are the...

25 CFR 543.23 - What are the minimum internal control standards for audit and accounting?

Code of Federal Regulations, 2013 CFR

2013-04-01

... supervision, bingo cards, bingo card sales, draw, prize payout; cash and equivalent controls, technologic aids... 25 Indians 2 2013-04-01 2013-04-01 false What are the minimum internal control standards for audit... INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS FOR CLASS II GAMING § 543.23 What are the...

Status of China's Energy Efficiency Standards and Labels for Appliances and International Collaboration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan

2008-03-01

China first adopted minimum energy performance standards (MEPS) in 1989. Today, there are standards for a wide range of domestic, commercial and selected industrial equipment. In 1999, China launched a voluntary endorsement label, which has grown to cover over 40 products including water-saving products (See Figure 1). Further, in 2005, China started a mandatory energy information label (also referred to as the 'Energy Label'). Today, the Energy Label is applied to four products including: air conditioners; household refrigerators; clothes washers; and unitary air conditioners (See Figure 2). MEPS and the voluntary endorsement labeling specifications have been updated and revised inmore » order to reflect technology improvements to those products in the market. These programs have had an important impact in reducing energy consumption of appliances in China. Indeed, China has built up a strong infrastructure to develop and implement product standards. Historically, however, the government's primary focus has been on the technical requirements for efficiency performance. Less attention has been paid to monitoring and enforcement with a minimal commitment of resources and little expansion of administrative capacity in this area. Thus, market compliance with both mandatory standards and labeling programs has been questionable and actual energy savings may have been undermined as a result. The establishment of a regularized monitoring system for tracking compliance with the mandatory standard and energy information label in China is a major area for program improvement. Over the years, the Collaborative Labeling and Appliance Standards Program (CLASP) has partnered with several Chinese institutions to promote energy-efficient products in China. CLASP, together with its implementing partner Lawrence Berkeley National Laboratory (LBNL), has assisted China in developing and updating the above-mentioned standards and labeling programs. Because of the increasing need for the development of a monitoring system to track compliance with standards and labeling, CLASP, with support from Japan's Ministry of Economy, Trade and Industry (METI), has expanded its ongoing collaboration with the China National Institute of Standards (CNIS) to include enforcement and monitoring. CNIS has already begun working on the issue of compliance. CNIS has conducted modest sample testing in 2006 for refrigerators, freezers and room air-conditioners, and repeated the same task in 2007 with a similar sample size for three products (refrigerators, freezers, air-conditioners and clothes washers). And, CNIS, with technical support from LBNL, has analyzed the data collected through testing. At the same time, parallel effort has also been paid to look at the potential impact of the label to 2020. In conjunction with CNIS, CLASP technical experts reviewed the standards development timeline of the four products currently subject to the mandatory energy information label. CLASP, with the support of METI/IEEJ, collaborated with CNIS to develop the efficiency grades, providing: technical input to the process; comment and advice on particular technical issues; as well as evaluation of the results. In addition, in order to effectively evaluate the impact of the label on China's market, CLASP further provided assistance to CNIS to collect data on both the efficiency distribution and product volume distribution of refrigerators on the market. This short report summarizes the status of Standards and Labeling program, current enforcement and monitoring mechanism in China, and states the importance of international collaborations.« less

Minimum reporting standards for clinical research on groin pain in athletes

PubMed Central

Delahunt, Eamonn; Thorborg, Kristian; Khan, Karim M; Robinson, Philip; Hölmich, Per; Weir, Adam

2015-01-01

Groin pain in athletes is a priority area for sports physiotherapy and sports medicine research. Heterogeneous studies with low methodological quality dominate research related to groin pain in athletes. Low-quality studies undermine the external validity of research findings and limit the ability to generalise findings to the target patient population. Minimum reporting standards for research on groin pain in athletes are overdue. We propose a set of minimum reporting standards based on best available evidence to be utilised in future research on groin pain in athletes. Minimum reporting standards are provided in relation to: (1) study methodology, (2) study participants and injury history, (3) clinical examination, (4) clinical assessment and (5) radiology. Adherence to these minimum reporting standards will strengthen the quality and transparency of research conducted on groin pain in athletes. This will allow an easier comparison of outcomes across studies in the future. PMID:26031644

76 FR 30990 - Notice of Funding Availability for the Small Business Transportation Resource Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-27

... contracts and subcontracts portfolio. 3. Provide a minimum of 20 hours of individual or group counseling... training programs, such as, business assessment, management training, counseling, technical assistance... information dissemination, small business counseling, and technical assistance with small businesses currently...

75 FR 23319 - Notice of Funding Availability for the Small Business Transportation Resource Center Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-03

... contracts and subcontracts portfolio. 3. Provide a minimum of 20 hours of individual or group counseling... programs, such as, business assessment, management training, counseling, technical assistance, marketing... dissemination, small business counseling, and technical assistance with small businesses currently doing...

14 CFR 414.19 - Technical criteria for reviewing a safety approval application.

Code of Federal Regulations, 2011 CFR

2011-01-01

...-developed criteria must define— (i) Design and minimum performance; (ii) Quality assurance system... 14 Aeronautics and Space 4 2011-01-01 2011-01-01 false Technical criteria for reviewing a safety... AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION LICENSING SAFETY APPROVALS Safety Approval Review and...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2010 CFR

2010-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2011 CFR

2011-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2012 CFR

2012-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2014 CFR

2014-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

21 CFR 14.120 - Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC).

Code of Federal Regulations, 2013 CFR

2013-04-01

... Radiation Safety Standards Committee (TEPRSSC). 14.120 Section 14.120 Food and Drugs FOOD AND DRUG... Technical Electronic Products Radiation Safety Standards Committee § 14.120 Establishment of the Technical Electronic Product Radiation Safety Standards Committee (TEPRSSC). The Technical Electronic Product Radiation...

25 CFR 542.22 - What are the minimum internal control standards for internal audit for Tier A gaming operations?

Code of Federal Regulations, 2010 CFR

2010-04-01

... but not limited to, bingo card control, payout procedures, and cash reconciliation process; (ii) Pull... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for... COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.22 What are...

25 CFR 542.32 - What are the minimum internal control standards for internal audit for Tier B gaming operations?

Code of Federal Regulations, 2010 CFR

2010-04-01

... but not limited to, bingo card control, payout procedures, and cash reconciliation process; (ii) Pull... 25 Indians 2 2010-04-01 2010-04-01 false What are the minimum internal control standards for... COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.32 What are...

TV Energy Consumption Trends and Energy-Efficiency Improvement Options

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, Won Young; Phadke, Amol; Shah, Nihar

2011-07-01

The SEAD initiative aims to transform the global market by increasing the penetration of highly efficient equipment and appliances. SEAD is a government initiative whose activities and projects engage the private sector to realize the large global energy savings potential from improved appliance and equipment efficiency. SEAD seeks to enable high-level global action by informing the Clean Energy Ministerial dialogue as one of the initiatives in the Global Energy Efficiency Challenge. In keeping with its goal of achieving global energy savings through efficiency, SEAD was approved as a task within the International Partnership for Energy Efficiency Cooperation (IPEEC) in Januarymore » 2010. SEAD partners work together in voluntary activities to: (1) ?raise the efficiency ceiling? by pulling super-efficient appliances and equipment into the market through cooperation on measures like incentives, procurement, awards, and research and development (R&D) investments; (2) ?raise the efficiency floor? by working together to bolster national or regional policies like minimum efficiency standards; and (3) ?strengthen the efficiency foundations? of programs by coordinating technical work to support these activities. Although not all SEAD partners may decide to participate in every SEAD activity, SEAD partners have agreed to engage actively in their particular areas of interest through commitment of financing, staff, consultant experts, and other resources. In addition, all SEAD partners are committed to share information, e.g., on implementation schedules for and the technical detail of minimum efficiency standards and other efficiency programs. Information collected and created through SEAD activities will be shared among all SEAD partners and, to the extent appropriate, with the global public.As of April 2011, the governments participating in SEAD are: Australia, Brazil, Canada, the European Commission, France, Germany, India, Japan, Korea, Mexico, Russia, South Africa, Sweden, the United Arab Emirates, the United Kingdom, and the United States. More information on SEAD is available from its website at http://www.superefficient.org/.« less

Mobility particle size spectrometers: harmonization of technical standards and data structure to facilitate high quality long-term observations of atmospheric particle number size distributions

NASA Astrophysics Data System (ADS)

Wiedensohler, A.; Birmili, W.; Nowak, A.; Sonntag, A.; Weinhold, K.; Merkel, M.; Wehner, B.; Tuch, T.; Pfeifer, S.; Fiebig, M.; Fjäraa, A. M.; Asmi, E.; Sellegri, K.; Depuy, R.; Venzac, H.; Villani, P.; Laj, P.; Aalto, P.; Ogren, J. A.; Swietlicki, E.; Williams, P.; Roldin, P.; Quincey, P.; Hüglin, C.; Fierz-Schmidhauser, R.; Gysel, M.; Weingartner, E.; Riccobono, F.; Santos, S.; Grüning, C.; Faloon, K.; Beddows, D.; Harrison, R.; Monahan, C.; Jennings, S. G.; O'Dowd, C. D.; Marinoni, A.; Horn, H.-G.; Keck, L.; Jiang, J.; Scheckman, J.; McMurry, P. H.; Deng, Z.; Zhao, C. S.; Moerman, M.; Henzing, B.; de Leeuw, G.; Löschau, G.; Bastian, S.

2012-03-01

Mobility particle size spectrometers often referred to as DMPS (Differential Mobility Particle Sizers) or SMPS (Scanning Mobility Particle Sizers) have found a wide range of applications in atmospheric aerosol research. However, comparability of measurements conducted world-wide is hampered by lack of generally accepted technical standards and guidelines with respect to the instrumental set-up, measurement mode, data evaluation as well as quality control. Technical standards were developed for a minimum requirement of mobility size spectrometry to perform long-term atmospheric aerosol measurements. Technical recommendations include continuous monitoring of flow rates, temperature, pressure, and relative humidity for the sheath and sample air in the differential mobility analyzer. We compared commercial and custom-made inversion routines to calculate the particle number size distributions from the measured electrical mobility distribution. All inversion routines are comparable within few per cent uncertainty for a given set of raw data. Furthermore, this work summarizes the results from several instrument intercomparison workshops conducted within the European infrastructure project EUSAAR (European Supersites for Atmospheric Aerosol Research) and ACTRIS (Aerosols, Clouds, and Trace gases Research InfraStructure Network) to determine present uncertainties especially of custom-built mobility particle size spectrometers. Under controlled laboratory conditions, the particle number size distributions from 20 to 200 nm determined by mobility particle size spectrometers of different design are within an uncertainty range of around ±10% after correcting internal particle losses, while below and above this size range the discrepancies increased. For particles larger than 200 nm, the uncertainty range increased to 30%, which could not be explained. The network reference mobility spectrometers with identical design agreed within ±4% in the peak particle number concentration when all settings were done carefully. The consistency of these reference instruments to the total particle number concentration was demonstrated to be less than 5%. Additionally, a new data structure for particle number size distributions was introduced to store and disseminate the data at EMEP (European Monitoring and Evaluation Program). This structure contains three levels: raw data, processed data, and final particle size distributions. Importantly, we recommend reporting raw measurements including all relevant instrument parameters as well as a complete documentation on all data transformation and correction steps. These technical and data structure standards aim to enhance the quality of long-term size distribution measurements, their comparability between different networks and sites, and their transparency and traceability back to raw data.

VLT instruments: industrial solutions for non-scientific detector systems

NASA Astrophysics Data System (ADS)

Duhoux, P.; Knudstrup, J.; Lilley, P.; Di Marcantonio, P.; Cirami, R.; Mannetta, M.

2014-07-01

Recent improvements in industrial vision technology and products together with the increasing need for high performance, cost efficient technical detectors for astronomical instrumentation have led ESO with the contribution of INAF to evaluate this trend and elaborate ad-hoc solutions which are interoperable and compatible with the evolution of VLT standards. The ESPRESSO spectrograph shall be the first instrument deploying this technology. ESO's Technical CCD (hereafter TCCD) requirements are extensive and demanding. A lightweight, low maintenance, rugged and high performance TCCD camera product or family of products is required which can operate in the extreme environmental conditions present at ESO's observatories with minimum maintenance and minimal downtime. In addition the camera solution needs to be interchangeable between different technical roles e.g. slit viewing, pupil and field stabilization, with excellent performance characteristics under a wide range of observing conditions together with ease of use for the end user. Interoperability is enhanced by conformance to recognized electrical, mechanical and software standards. Technical requirements and evaluation criteria for the TCCD solution are discussed in more detail. A software architecture has been adopted which facilitates easy integration with TCCD's from different vendors. The communication with the devices is implemented by means of dedicated adapters allowing usage of the same core framework (business logic). The preference has been given to cameras with an Ethernet interface, using standard TCP/IP based communication. While the preferred protocol is the industrial standard GigE Vision, not all vendors supply cameras with this interface, hence proprietary socket-based protocols are also acceptable with the provision of a validated Linux compliant API. A fundamental requirement of the TCCD software is that it shall allow for a seamless integration with the existing VLT software framework. ESPRESSO is a fiber-fed, cross-dispersed echelle spectrograph that will be located in the Combined-Coudé Laboratory of the VLT in the Paranal Observatory in Chile. It will be able to operate either using the light of any of the UT's or using the incoherently combined light of up to four UT's. The stabilization of the incoming beam is achieved by dedicated piezo systems controlled via active loops closed on 4 + 4 dedicated TCCD's for the stabilization of the pupil image and of the field with a frequency goal of 3 Hz on a 2nd to 3rd magnitude star. An additional 9th TCCD system shall be used as an exposure-meter. In this paper we will present the technical CCD solution for future VLT instruments.

A Practical Approach to Early Technical Education

ERIC Educational Resources Information Center

Chijioke, M. O.

1973-01-01

A minimum of technological awareness is essential to Black Africa in its efforts to modernize itself. The young grow up deprived of an environment where they are made to feel at home with gadgets and machines. Elementary technical training and orderly exposure to mathematics are essential to child's education. (EB)

30 CFR 7.44 - Technical requirements.

Code of Federal Regulations, 2012 CFR

2012-07-01

... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Battery Assemblies § 7.44 Technical requirements. (a)(1) Battery boxes and covers constructed of AISI 1010 hot rolled steel shall have the following minimum thicknesses based on the total weight of a unit of the battery assembly charged and ready...

30 CFR 7.44 - Technical requirements.

Code of Federal Regulations, 2011 CFR

2011-07-01

... APPROVAL OF MINING PRODUCTS TESTING BY APPLICANT OR THIRD PARTY Battery Assemblies § 7.44 Technical requirements. (a)(1) Battery boxes and covers constructed of AISI 1010 hot rolled steel shall have the following minimum thicknesses based on the total weight of a unit of the battery assembly charged and ready...

78 FR 63873 - Minimum Internal Control Standards

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-25

... Internal Control Standards AGENCY: National Indian Gaming Commission, Interior. ACTION: Final rule. SUMMARY: The National Indian Gaming Commission (NIGC) amends its minimum internal control standards for Class... Internal Control Standards. 64 FR 590. The rule added a new part to the Commission's regulations...

25 CFR 12.31 - Are there any minimum employment standards for Indian country law enforcement personnel?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Are there any minimum employment standards for Indian country law enforcement personnel? 12.31 Section 12.31 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW AND ORDER INDIAN COUNTRY LAW ENFORCEMENT Qualifications and Training Requirements § 12.31 Are there any minimum employment standards...

Abandoning wells working group

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

The primary objective of this working group is to identify major technical, regulatory, and environmental issues that are relevant to the abandonment of offshore wellbores. Once the issues have been identified, the working group also has the objective of making recommendations or providing potential solutions for consideration. Areas for process improvement will be identified and {open_quotes}best practices{close_quotes} will be discussed and compared to {open_quotes}minimum standards.{close_quotes} The working group will primarily focus on wellbore abandonment in the Gulf of Mexico. However, workshop participants are encouraged to discuss international issues which may be relevant to wellbore abandonment practices in the Gulf ofmore » Mexico. The Abandoning Wells Group has identified several major areas for discussion that have concerns related to both operators and service companies performing wellbore abandonments in the Gulf of Mexico. The following broad topics were selected for the agenda: (1) MMS minimum requirements and state regulations. (2) Co-existence of best practices, new technology, and P & A economics. (3) Liability and environmental issues relating to wellbore abandonment.« less

Setting a national minimum standard for health benefits: how do state benefit mandates compare with benefits in large-group plans?

PubMed

Frey, Allison; Mika, Stephanie; Nuzum, Rachel; Schoen, Cathy

2009-06-01

Many proposed health insurance reforms would establish a federal minimum benefit standard--a baseline set of benefits to ensure that people have adequate coverage and financial protection when they purchase insurance. Currently, benefit mandates are set at the state level; these vary greatly across states and generally target specific areas rather than set an overall standard for what qualifies as health insurance. This issue brief considers what a broad federal minimum standard might look like by comparing existing state benefit mandates with the services and providers covered under the Federal Employees Health Benefits Program (FEHBP) Blue Cross and Blue Shield standard benefit package, an example of minimum creditable coverage that reflects current standard practice among employer-sponsored health plans. With few exceptions, benefits in the FEHBP standard option either meet or exceed those that state mandates require-indicating that a broad-based national benefit standard would include most existing state benefit mandates.

29 CFR 520.200 - What is the legal authority for payment of wages lower than the minimum wage required by section...

Code of Federal Regulations, 2010 CFR

2010-07-01

... the minimum wage required by section 6(a) of the Fair Labor Standards Act? 520.200 Section 520.200... lower than the minimum wage required by section 6(a) of the Fair Labor Standards Act? Section 14(a) of..., for the payment of special minimum wage rates to workers employed as messengers, learners (including...

Minimum Standards for Tribal Child Care Centers.

ERIC Educational Resources Information Center

Administration on Children, Youth, and Families (DHHS), Washington, DC. Child Care Bureau.

These minimum standards for tribal child care centers are being issued as guidance. An interim period of at least 1 year will allow tribal agencies to identify implementation issues, ensure that the standards reflect tribal needs, and guarantee that the standards provide adequate protection for children. The standards will be issued as regulations…

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

48 CFR 811.103-70 - Technical industry standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical industry... Documents 811.103-70 Technical industry standards. Where items are required to conform to technical industry... organizations, where such standards are generally recognized and accepted in the industry involved, the...

7 CFR 51.311 - Marking requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...

7 CFR 51.311 - Marking requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...

7 CFR 51.311 - Marking requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...

Automatically updating predictive modeling workflows support decision-making in drug design.

PubMed

Muegge, Ingo; Bentzien, Jörg; Mukherjee, Prasenjit; Hughes, Robert O

2016-09-01

Using predictive models for early decision-making in drug discovery has become standard practice. We suggest that model building needs to be automated with minimum input and low technical maintenance requirements. Models perform best when tailored to answering specific compound optimization related questions. If qualitative answers are required, 2-bin classification models are preferred. Integrating predictive modeling results with structural information stimulates better decision making. For in silico models supporting rapid structure-activity relationship cycles the performance deteriorates within weeks. Frequent automated updates of predictive models ensure best predictions. Consensus between multiple modeling approaches increases the prediction confidence. Combining qualified and nonqualified data optimally uses all available information. Dose predictions provide a holistic alternative to multiple individual property predictions for reaching complex decisions.

Wege zur Festigung der Fachlexik (Ways of Building a Technical Vocabulary)

ERIC Educational Resources Information Center

Kalmykowa, Elena

1974-01-01

Learning to read foreign technical texts requires (a) a minimum vocabulary and (b) effective drill. The following are suggested: translation, question-answer method, definition exercises, exercises to develop skill in the use of reference works, schematic presentations and tables, annotating and making reports and summaries. (Text is in German.)…

International Experience in Standards and Labeling Programs for Rice Cookers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhou, Nan; Zheng, Nina

China has had an active program on energy efficiency standards for household appliances since the mid-1990s. Rice cooker is among the first to be subject to such mandatory regulation, since it is one of the most prevalent electric appliances in Chinese households. Since first introduced in 1989, the minimum energy efficiency standard for rice cookers has not been revised. Therefore, the potential for energy saving is considerable. Initial analysis from CNIS indicates that potential carbon savings is likely to reach 7.6 million tons of CO2 by the 10th year of the standard implementation. Since September 2007, CNIS has been workingmore » with various groups to develop the new standard for rice cookers. With The Energy Foundation's support, LBNL has assisted CNIS in the revision of the minimum energy efficiency standard for rice cookers that is expected to be effective in 2009. Specifically, work has been in the following areas: assistance in developing consumer survey on usage pattern of rice cookers, review of international standards, review of international test procedures, comparison of the international standards and test procedures, and assessment of technical options of reducing energy use. This report particularly summarizes the findings of reviewing international standards and technical options of reducing energy consumption. The report consists of an overview of rice cooker standards and labeling programs and testing procedures in Hong Kong, South Korea, Japan and Thailand, and Japan's case study in developing energy efficiency rice cooker technologies and rice cooker efficiency programs. The results from the analysis can be summarized as the follows: Hong Kong has a Voluntary Energy Efficiency Labeling scheme for electric rice cookers initiated in 2001, with revision implemented in 2007; South Korea has both MEPS and Mandatory Energy Efficiency Label targeting the same category of rice cookers as Hong Kong; Thailand's voluntary endorsement labeling program is similar to Hong Kong in program design but has 5 efficiency grades; Japan's program is distinct in its adoption of the 'Top Runner' approach, in which, the future efficiency standards is set based on the efficiency levels of the most efficient product in the current domestic market. Although the standards are voluntary, penalties can still be evoked if the average efficiency target is not met. Both Hong Kong and South Korea's tests involve pouring water into the inner pot equal to 80% of its rated volume; however, white rice is used as a load for its tests in Hong Kong whereas no rice is used for tests in South Korea. In Japan's case, water level specified by the manufactures is used and milled rice is used as a load only partially in the tests. Moreover, Japan does not conduct heat efficiency test but its energy consumption measurements tests are much more complex, with 4 different tests are conducted to determine the annual average energy consumption. Hong Kong and Thailand both set Minimum Allowable Heat Efficiency for different rated wattages. The energy efficiency requirements are identical except that the minimum heat efficiency in Thailand is 1 percentage point higher for all rated power categories. In South Korea, MEPS and label's energy efficiency grades are determined by the rice cooker's Rated Energy Efficiency for induction, non-induction, pressure, nonpressure rice cookers. Japan's target standard values are set for electromagnetic induction heating products and non-electromagnetic induction heating products by different size of rice cookers. Specific formulas are used by type and size depending on the mass of water evaporation of the rice cookers. Japan has been the leading country in technology development of various types of rice cookers, and developed concrete energy efficiency standards for rice cookers. However, as consumers in Japan emphasize the deliciousness of cooked rice over other factors, many types of models were developed to improve the taste of cooked rice. Nonetheless, the efficiency of electromagnetic induction heating (IH) rice cookers in warm mode has improved approximately 12 percent from 1993 to 2004 due to the 'low temperature warming method' developed by manufacturers. The Energy Conservation Center of Japan (IEEJ) releases energy saving products database on the web regularly, on which the energy saving performance of each product is listed and ranked. Energy saving in rice cookers mostly rest with insulation of the pot. Technology developed to improve the energy efficiency of the rice cookers includes providing vacuum layers on both side of the pot, using copper-plated materials, and double stainless layer lid that can be heated and steam can run in between the two layers to speed the heating process.« less

47 CFR 73.319 - FM multiplex subcarrier technical standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 47 Telecommunication 4 2011-10-01 2011-10-01 false FM multiplex subcarrier technical standards. 73... SERVICES RADIO BROADCAST SERVICES FM Broadcast Stations § 73.319 FM multiplex subcarrier technical standards. (a) The technical specifications in this Section apply to all transmissions of FM multiplex...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

48 CFR 852.211-72 - Technical industry standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false Technical industry....211-72 Technical industry standards. As prescribed in 811.103-70, insert the following provision: Technical Industry Standards (JAN 2008) The supplies or equipment required by this invitation for bid or...

76 FR 43743 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-21

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No. PHMSA-2011-0127] Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials...

Missouri Minimum Standards for School Buses

ERIC Educational Resources Information Center

Nicastro, Chris L.

2008-01-01

The revised minimum standards for school bus chassis and school bus bodies have been prepared in conformity with the Revised Statutes of Missouri (RSMo) for school bus transportation. The standards recommended by the 2005 National Conference on School Transportation and the Federal Motor Vehicle Safety Standards (FMVSS) promulgated by the U. S.…

78 FR 42821 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2013-07-17

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Affairs Acquisition Regulation (VAAR) Provision 852.211-72 (formerly 852.211-75), Technical Industry.... Abstract: VAAR provision 852.211-72, Technical Industry Standards, requires items offered for sale to VA...

76 FR 60029 - Notice of Issuance Technical Bulletin 2011-2, Extended Deferral of the Effective Date of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Notice of Issuance Technical Bulletin 2011-2, Extended Deferral of the Effective Date of Technical Bulletin 2006-1 AGENCY: Federal Accounting Standards Advisory... hereby given that the Federal Accounting Standards Advisory Board (FASAB) has issued Technical Bulletin...

TECHNICAL BASIS FOR A CANDIDATE BUILDING MATERIALS RADIUM STANDARD

EPA Science Inventory

The report summarizes the technical basis for a candidate building materials radium standard. It contains the standard and a summary of the technical basis for the standard. (NOTE: The Florida Radon Research Program (FRRP), sponsored by the Environmental Protection Agency and the...

Design and quality standards for custom hybrid microcircuits

NASA Technical Reports Server (NTRS)

Allen, R. V.

1977-01-01

A hybrid microcircuit standard was developed after a thorough review of applicable NASA, military, industry, and technical society specifications and standards and compilation of comments from technical reviewers throughout the hybrid industry. The draft of the standard submitted to the technical reviewers, the comments from the reviewers, and the completed standard are discussed.

The volume-outcome relationship and minimum volume standards--empirical evidence for Germany.

PubMed

Hentschker, Corinna; Mennicken, Roman

2015-06-01

For decades, there is an ongoing discussion about the quality of hospital care leading i.a. to the introduction of minimum volume standards in various countries. In this paper, we analyze the volume-outcome relationship for patients with intact abdominal aortic aneurysm and hip fracture. We define hypothetical minimum volume standards in both conditions and assess consequences for access to hospital services in Germany. The results show clearly that patients treated in hospitals with a higher case volume have on average a significant lower probability of death in both conditions. Furthermore, we show that the hypothetical minimum volume standards do not compromise overall access measured with changes in travel times. Copyright © 2014 John Wiley & Sons, Ltd.

Household food security and adequacy of child diet in the food insecure region north in Ghana.

PubMed

Agbadi, Pascal; Urke, Helga Bjørnøy; Mittelmark, Maurice B

2017-01-01

Adequate diet is of crucial importance for healthy child development. In food insecure areas of the world, the provision of adequate child diet is threatened in the many households that sometimes experience having no food at all to eat (household food insecurity). In the context of food insecure northern Ghana, this study investigated the relationship between level of household food security and achievement of recommended child diet as measured by WHO Infant and Young Child Feeding Indicators. Using data from households and 6-23 month old children in the 2012 Feed the Future baseline survey (n = 871), descriptive analyses assessed the prevalence of minimum meal frequency; minimum dietary diversity, and minimum acceptable diet. Logistic regression analysis was used to examine the association of minimum acceptable diet with household food security, while accounting for the effects of child sex and age, maternal -age, -dietary diversity, -literacy and -education, household size, region, and urban-rural setting. Household food security was assessed with the Household Hunger Scale developed by USAID's Food and Nutrition Technical Assistance Project. Forty-nine percent of children received minimum recommended meal frequency, 31% received minimum dietary diversity, and 17% of the children received minimum acceptable diet. Sixty-four percent of the children lived in food secure households, and they were significantly more likely than children in food insecure households to receive recommended minimum acceptable diet [O.R = 0.53; 95% CI: 0.35, 0.82]. However, in 80% of food secure households, children did not receive a minimal acceptable diet by WHO standards. Children living in food secure households were more likely than others to receive a minimum acceptable diet. Yet living in a food secure household was no guarantee of child dietary adequacy, since eight of 10 children in food secure households received less than a minimum acceptable diet. The results call for research into factors besides household food security in the search for determinants of child diet adequacy. In this study at least, household food security was a very weak marker of child diet adequacy. This finding is of significance to public health practice, since it calls into question any assumption that having enough food in a household necessarily results in adequately fed children.

Household food security and adequacy of child diet in the food insecure region north in Ghana

PubMed Central

Agbadi, Pascal; Urke, Helga Bjørnøy; Mittelmark, Maurice B.

2017-01-01

Background and objectives Adequate diet is of crucial importance for healthy child development. In food insecure areas of the world, the provision of adequate child diet is threatened in the many households that sometimes experience having no food at all to eat (household food insecurity). In the context of food insecure northern Ghana, this study investigated the relationship between level of household food security and achievement of recommended child diet as measured by WHO Infant and Young Child Feeding Indicators. Methods Using data from households and 6–23 month old children in the 2012 Feed the Future baseline survey (n = 871), descriptive analyses assessed the prevalence of minimum meal frequency; minimum dietary diversity, and minimum acceptable diet. Logistic regression analysis was used to examine the association of minimum acceptable diet with household food security, while accounting for the effects of child sex and age, maternal -age, -dietary diversity, -literacy and -education, household size, region, and urban-rural setting. Household food security was assessed with the Household Hunger Scale developed by USAID’s Food and Nutrition Technical Assistance Project. Results Forty-nine percent of children received minimum recommended meal frequency, 31% received minimum dietary diversity, and 17% of the children received minimum acceptable diet. Sixty-four percent of the children lived in food secure households, and they were significantly more likely than children in food insecure households to receive recommended minimum acceptable diet [O.R = 0.53; 95% CI: 0.35, 0.82]. However, in 80% of food secure households, children did not receive a minimal acceptable diet by WHO standards. Conclusions Children living in food secure households were more likely than others to receive a minimum acceptable diet. Yet living in a food secure household was no guarantee of child dietary adequacy, since eight of 10 children in food secure households received less than a minimum acceptable diet. The results call for research into factors besides household food security in the search for determinants of child diet adequacy. In this study at least, household food security was a very weak marker of child diet adequacy. This finding is of significance to public health practice, since it calls into question any assumption that having enough food in a household necessarily results in adequately fed children. PMID:28494024

75 FR 13209 - Proposed Information Collection (Technical Industry Standards) Activity: Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-18

... (Technical Industry Standards) Activity: Comment Request AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires items offered for...

1996 DOE technical standards program workshop: Proceedings

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1996-07-01

The workshop theme is `The Strategic Standardization Initiative - A Technology Exchange and Global Competitiveness Challenge for DOE.` The workshop goal is to inform the DOE technical standards community of strategic standardization activities taking place in the Department, other Government agencies, standards developing organizations, and industry. Individuals working on technical standards will be challenged to improve cooperation and communications with the involved organizations in response to the initiative. Workshop sessions include presentations by representatives from various Government agencies that focus on coordination among and participation of Government personnel in the voluntary standards process; reports by standards organizations, industry, and DOEmore » representatives on current technology exchange programs; and how the road ahead appears for `information superhighway` standardization. Another session highlights successful standardization case studies selected from several sites across the DOE complex. The workshop concludes with a panel discussion on the goals and objectives of the DOE Technical Standards Program as envisioned by senior DOE management. The annual workshop on technical standards has proven to be an effective medium for communicating information related to standards throughout the DOE community. Technical standards are used to transfer technology and standardize work processes to produce consistent, acceptable results. They provide a practical solution to the Department`s challenge to protect the environment and the health and safety of the public and workers during all facility operations. Through standards, the technologies of industries and governments worldwide are available to DOE. The DOE Technical Standards Program, a Department-wide effort that crosscuts all organizations and disciplines, links the Department to those technologies.« less

Setting Performance Standards for Technical and Nontechnical Competence in General Surgery.

PubMed

Szasz, Peter; Bonrath, Esther M; Louridas, Marisa; Fecso, Andras B; Howe, Brett; Fehr, Adam; Ott, Michael; Mack, Lloyd A; Harris, Kenneth A; Grantcharov, Teodor P

2017-07-01

The objectives of this study were to (1) create a technical and nontechnical performance standard for the laparoscopic cholecystectomy, (2) assess the classification accuracy and (3) credibility of these standards, (4) determine a trainees' ability to meet both standards concurrently, and (5) delineate factors that predict standard acquisition. Scores on performance assessments are difficult to interpret in the absence of established standards. Trained raters observed General Surgery residents performing laparoscopic cholecystectomies using the Objective Structured Assessment of Technical Skill (OSATS) and the Objective Structured Assessment of Non-Technical Skills (OSANTS) instruments, while as also providing a global competent/noncompetent decision for each performance. The global decision was used to divide the trainees into 2 contrasting groups and the OSATS or OSANTS scores were graphed per group to determine the performance standard. Parametric statistics were used to determine classification accuracy and concurrent standard acquisition, receiver operator characteristic (ROC) curves were used to delineate predictive factors. Thirty-six trainees were observed 101 times. The technical standard was an OSATS of 21.04/35.00 and the nontechnical standard an OSANTS of 22.49/35.00. Applying these standards, competent/noncompetent trainees could be discriminated in 94% of technical and 95% of nontechnical performances (P < 0.001). A 21% discordance between technically and nontechnically competent trainees was identified (P < 0.001). ROC analysis demonstrated case experience and trainee level were both able to predict achieving the standards with an area under the curve (AUC) between 0.83 and 0.96 (P < 0.001). The present study presents defensible standards for technical and nontechnical performance. Such standards are imperative to implementing summative assessments into surgical training.

29 CFR 4.2 - Payment of minimum wage specified in section 6(a)(1) of the Fair Labor Standards Act of 1938...

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true Payment of minimum wage specified in section 6(a)(1) of the... and Procedures § 4.2 Payment of minimum wage specified in section 6(a)(1) of the Fair Labor Standards... employees shall pay any employees engaged in such work less than the minimum wage specified in section 6(a...

75 FR 28857 - Agency Information Collection (Technical Industry Standards) Activities Under OMB Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-24

... (Technical Industry Standards) Activities Under OMB Review AGENCY: Office of Acquisition and Logistics... Industry Standards. OMB Control Number: 2900-0586. Type of Review: Extension of a currently approved collection. Abstract: VAAR provision 852.211-75, Technical Industry Standards, requires that items offered...

77 FR 36331 - Nineteenth Meeting: RTCA Special Committee 213, Enhanced Flight Vision Systems/Synthetic Vision...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-18

... Document--Draft DO-XXX, Minimum Aviation Performance Standards (MASPS) for an Enhanced Flight Vision System... Discussion (9:00 a.m.-5:00 p.m.) Provide Comment Resolution of Document--Draft DO-XXX, Minimum Aviation.../Approve FRAC Draft for PMC Consideration--Draft DO- XXX, Minimum Aviation Performance Standards (MASPS...

2013 Missouri Minimum Standards for School Buses

ERIC Educational Resources Information Center

Nicastro, Chris L.

2012-01-01

The revised minimum standards for school bus chassis and school bus bodies have been prepared in conformity with the Revised Statutes of Missouri (RSMo) for school bus transportation. The standards recommended by the 2010 National Conference on School Transportation and the Federal Motor Vehicle Safety Standards (FMVSS) promulgated by the U. S.…

Development of minimum standards for hardwoods used in producing underground coal mine timbers

Treesearch

Floyd G. Timson

1978-01-01

This note presents minimum standards for raw material used in the production of sawn, split, and round timbers for the underground mining industry. The standards are based on a summary of information gathered from many mine-timber producers.

External High School Diploma Program Evaluation Project. Final Report, October 1, 1979-June 30, 1980. Part III: Competency Comparison.

ERIC Educational Resources Information Center

Hole, Wanda Clements; Seggerson, Sharon Corcoran

The purpose of this portion of a project was to compare External High School Diploma (EHSDP) competencies at Waukesha County (Wisconsin) Technical Institute with minimum high school competency requirements in (1) local school districts and (2) selected states. Testing focused on basic skills of mathematics, reading, and writing. Minimum competency…

Impact of HIPAA’s Minimum Necessary Standard on Genomic Data Sharing

PubMed Central

Evans, Barbara J.; Jarvik, Gail P.

2017-01-01

Purpose This article provides a brief introduction to the HIPAA Privacy Rule’s minimum necessary standard, which applies to sharing of genomic data, particularly clinical data, following 2013 Privacy Rule revisions. Methods This research used the Thomson Reuters Westlaw™ database and law library resources in its legal analysis of the HIPAA privacy tiers and the impact of the minimum necessary standard on genomic data-sharing. We considered relevant example cases of genomic data-sharing needs. Results In a climate of stepped-up HIPAA enforcement, this standard is of concern to laboratories that generate, use, and share genomic information. How data-sharing activities are characterized—whether for research, public health, or clinical interpretation and medical practice support—affects how the minimum necessary standard applies and its overall impact on data access and use. Conclusion There is no clear regulatory guidance on how to apply HIPAA’s minimum necessary standard when considering the sharing of information in the data-rich environment of genomic testing. Laboratories that perform genomic testing should engage with policy-makers to foster sound, well-informed policies and appropriate characterization of data-sharing activities to minimize adverse impacts on day-to-day workflows. PMID:28914268

Impact of HIPAA's minimum necessary standard on genomic data sharing.

PubMed

Evans, Barbara J; Jarvik, Gail P

2018-04-01

This article provides a brief introduction to the Health Insurance Portability and Accountability Act of 1996 (HIPAA) Privacy Rule's minimum necessary standard, which applies to sharing of genomic data, particularly clinical data, following 2013 Privacy Rule revisions. This research used the Thomson Reuters Westlaw database and law library resources in its legal analysis of the HIPAA privacy tiers and the impact of the minimum necessary standard on genomic data sharing. We considered relevant example cases of genomic data-sharing needs. In a climate of stepped-up HIPAA enforcement, this standard is of concern to laboratories that generate, use, and share genomic information. How data-sharing activities are characterized-whether for research, public health, or clinical interpretation and medical practice support-affects how the minimum necessary standard applies and its overall impact on data access and use. There is no clear regulatory guidance on how to apply HIPAA's minimum necessary standard when considering the sharing of information in the data-rich environment of genomic testing. Laboratories that perform genomic testing should engage with policy makers to foster sound, well-informed policies and appropriate characterization of data-sharing activities to minimize adverse impacts on day-to-day workflows.

An Empirical System for Assessing the Impact of Aptitude Requirement Adjustments on Air Force Initial Skills Training.

ERIC Educational Resources Information Center

Mumford, Michael D.; And Others

A multivariate modeling approach was developed to assess the impact of changes in aptitude requirement minimums on U.S. Air Force technical training outcomes. Initially, interviews were conducted with technical training personnel to identify significant student inputs, course content, and training outcome variables. Measures of these variables…

Entanglement of 3000 atoms by detecting one photon

NASA Astrophysics Data System (ADS)

Vuletic, Vladan

2016-05-01

Quantum-mechanically correlated (entangled) states of many particles are of interest in quantum information, quantum computing and quantum metrology. In particular, entangled states of many particles can be used to overcome limits on measurements performed with ensembles of independent atoms (standard quantum limit). Metrologically useful entangled states of large atomic ensembles (spin squeezed states) have been experimentally realized. These states display Gaussian spin distribution functions with a non-negative Wigner quasiprobability distribution function. We report the generation of entanglement in a large atomic ensemble via an interaction with a very weak laser pulse; remarkably, the detection of a single photon prepares several thousand atoms in an entangled state. We reconstruct a negative-valued Wigner function, and verify an entanglement depth (the minimum number of mutually entangled atoms) that comprises 90% of the atomic ensemble containing 3100 atoms. Further technical improvement should allow the generation of more complex Schrödinger cat states, and of states the overcome the standard quantum limit.

Modeling technical change in climate analysis: evidence from agricultural crop damages.

PubMed

Ahmed, Adeel; Devadason, Evelyn S; Al-Amin, Abul Quasem

2017-05-01

This study accounts for the Hicks neutral technical change in a calibrated model of climate analysis, to identify the optimum level of technical change for addressing climate changes. It demonstrates the reduction to crop damages, the costs to technical change, and the net gains for the adoption of technical change for a climate-sensitive Pakistan economy. The calibrated model assesses the net gains of technical change for the overall economy and at the agriculture-specific level. The study finds that the gains of technical change are overwhelmingly higher than the costs across the agriculture subsectors. The gains and costs following technical change differ substantially for different crops. More importantly, the study finds a cost-effective optimal level of technical change that potentially reduces crop damages to a minimum possible level. The study therefore contends that the climate policy for Pakistan should consider the role of technical change in addressing climate impacts on the agriculture sector.

14 CFR 1274.505 - Procurement procedures.

Code of Federal Regulations, 2010 CFR

2010-01-01

... performance, financial and technical resources or accessibility to other necessary resources. In certain... or performance required, including the range of acceptable characteristics or minimum acceptable...

DOE standard: The Department of Energy Laboratory Accreditation Program for radiobioassay

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

1998-12-01

This technical standard describes the US Department of Energy Laboratory Accreditation Program (DOELAP) for Radiobioassay, for use by the US Department of Energy (DOE) and DOE Contractor radiobioassay programs. This standard is intended to be used in conjunction with the general administrative technical standard that describes the overall DOELAP accreditation process--DOE-STD-1111-98, Department of Energy Laboratory Accreditation Program Administration. This technical standard pertains to radiobioassay service laboratories that provide either direct or indirect (in vivo or in vitro) radiobioassay measurements in support of internal dosimetry programs at DOE facilities or for DOE and DOE contractors. Similar technical standards have been developedmore » for other DOELAP dosimetry programs. This program consists of providing an accreditation to DOE radiobioassay programs based on successful completion of a performance-testing process and an on-site evaluation by technical experts. This standard describes the technical requirements and processes specific to the DOELAP Radiobioassay Accreditation Program as required by 10 CFR 835 and as specified generically in DOE-STD-1111-98.« less

The Need for Higher Minimum Staffing Standards in U.S. Nursing Homes

PubMed Central

Harrington, Charlene; Schnelle, John F.; McGregor, Margaret; Simmons, Sandra F.

2016-01-01

Many U.S. nursing homes have serious quality problems, in part, because of inadequate levels of nurse staffing. This commentary focuses on two issues. First, there is a need for higher minimum nurse staffing standards for U.S. nursing homes based on multiple research studies showing a positive relationship between nursing home quality and staffing and the benefits of implementing higher minimum staffing standards. Studies have identified the minimum staffing levels necessary to provide care consistent with the federal regulations, but many U.S. facilities have dangerously low staffing. Second, the barriers to staffing reform are discussed. These include economic concerns about costs and a focus on financial incentives. The enforcement of existing staffing standards has been weak, and strong nursing home industry political opposition has limited efforts to establish higher standards. Researchers should study the ways to improve staffing standards and new payment, regulatory, and political strategies to improve nursing home staffing and quality. PMID:27103819

12 CFR 615.5351 - Standards for determination of appropriate individual institution minimum capital ratios.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Standards for determination of appropriate individual institution minimum capital ratios. 615.5351 Section 615.5351 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM FUNDING AND FISCAL AFFAIRS, LOAN POLICIES AND OPERATIONS, AND FUNDING OPERATIONS Establishment of Minimum Capital...

77 FR 60625 - Minimum Internal Control Standards for Class II Gaming

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-04

...-37 Minimum Internal Control Standards for Class II Gaming AGENCY: National Indian Gaming Commission... Internal Control Standards that were published on September 21, 2012. DATES: The effective date [email protected] . FOR FURTHER INFORMATION CONTACT: Jennifer Ward, Attorney, NIGC Office of General Counsel, at...

14 CFR 121.335 - Equipment standards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Equipment standards. (a) Reciprocating engine powered airplanes. The oxygen apparatus, the minimum rates of oxygen flow, and the supply of oxygen necessary to comply with § 121.327 must meet the standards...) Turbine engine powered airplanes. The oxygen apparatus, the minimum rate of oxygen flow, and the supply of...

14 CFR 121.335 - Equipment standards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Equipment standards. (a) Reciprocating engine powered airplanes. The oxygen apparatus, the minimum rates of oxygen flow, and the supply of oxygen necessary to comply with § 121.327 must meet the standards...) Turbine engine powered airplanes. The oxygen apparatus, the minimum rate of oxygen flow, and the supply of...

14 CFR 121.335 - Equipment standards.

Code of Federal Regulations, 2012 CFR

2012-01-01

... Equipment standards. (a) Reciprocating engine powered airplanes. The oxygen apparatus, the minimum rates of oxygen flow, and the supply of oxygen necessary to comply with § 121.327 must meet the standards...) Turbine engine powered airplanes. The oxygen apparatus, the minimum rate of oxygen flow, and the supply of...

14 CFR 121.335 - Equipment standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Equipment standards. (a) Reciprocating engine powered airplanes. The oxygen apparatus, the minimum rates of oxygen flow, and the supply of oxygen necessary to comply with § 121.327 must meet the standards...) Turbine engine powered airplanes. The oxygen apparatus, the minimum rate of oxygen flow, and the supply of...

14 CFR 121.335 - Equipment standards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... Equipment standards. (a) Reciprocating engine powered airplanes. The oxygen apparatus, the minimum rates of oxygen flow, and the supply of oxygen necessary to comply with § 121.327 must meet the standards...) Turbine engine powered airplanes. The oxygen apparatus, the minimum rate of oxygen flow, and the supply of...

Assessment of the NASA Flight Assurance Review Program

NASA Technical Reports Server (NTRS)

Holmes, J.; Pruitt, G.

1983-01-01

The NASA flight assurance review program to develop minimum standard guidelines for flight assurance reviews was assessed. Documents from NASA centers and NASA headquarters to determine current design review practices and procedures were evaluated. Six reviews were identified for the recommended minimum. The practices and procedures used at the different centers to incorporate the most effective ones into the minimum standard review guidelines were analyzed and guidelines for procedures, personnel and responsibilies, review items/data checklist, and feedback and closeout were defined. The six recommended reviews and the minimum standards guidelines developed for flight assurance reviews are presented. Observations and conclusions for further improving the NASA review and quality assurance process are outlined.

42 CFR 493.1413 - Standard; Technical consultant responsibilities.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 42 Public Health 5 2011-10-01 2011-10-01 false Standard; Technical consultant responsibilities. 493.1413 Section 493.1413 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH... Nonwaived Testing Laboratories Performing Moderate Complexity Testing § 493.1413 Standard; Technical...

7 CFR 653.4 - Availability of technical standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 7 Agriculture 6 2010-01-01 2010-01-01 false Availability of technical standards. 653.4 Section 653.4 Agriculture Regulations of the Department of Agriculture (Continued) NATURAL RESOURCES CONSERVATION SERVICE, DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL STANDARDS § 653.4 Availability of...

PIAAC Technical Standards and Guidelines

ERIC Educational Resources Information Center

OECD Publishing, 2014

2014-01-01

The Programme for International Assessment of Adult Competencies (PIAAC) will establish technical standards and guidelines to ensure that the survey design and implementation processes of PIAAC yield high-quality and internationally comparable data. This document provides a revised version of the technical standards and guidelines originally…

78 FR 61445 - Seventy-Sixth Meeting: RTCA Special Committee 147, Minimum Operational Performance Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-10-03

... Committee 147, Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems... Traffic Alert and Collision Avoidance Systems Airborne Equipment. SUMMARY: The FAA is issuing this notice... Performance Standards for Traffic Alert and Collision Avoidance Systems Airborne Equipment. DATES: The meeting...

78 FR 66419 - Seventy Sixth Meeting: RTCA Special Committee 147, Minimum Operational Performance Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-05

... Committee 147, Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems... Traffic Alert and Collision Avoidance Systems Airborne Equipment. SUMMARY: The FAA is issuing this notice... Performance Standards for Traffic Alert and Collision Avoidance Systems Airborne Equipment. DATES: The meeting...

25 CFR 900.45 - What specific minimum requirements shall an Indian tribe or tribal organization's financial...

Code of Federal Regulations, 2011 CFR

2011-04-01

... or tribal organization's financial management system contain to meet these standards? 900.45 Section... ASSISTANCE ACT Standards for Tribal or Tribal Organization Management Systems Standards for Financial Management Systems § 900.45 What specific minimum requirements shall an Indian tribe or tribal organization's...

25 CFR 36.22 - Standard VII-Elementary instructional program.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true Standard VII-Elementary instructional program. 36.22 Section 36.22 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum...

25 CFR 36.21 - Standard VI-Kindergarten instructional program.

Code of Federal Regulations, 2012 CFR

2012-04-01

... 25 Indians 1 2012-04-01 2011-04-01 true Standard VI-Kindergarten instructional program. 36.21 Section 36.21 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum...

Minimum Essential Requirements and Standards in Medical Education.

ERIC Educational Resources Information Center

Wojtczak, Andrzej; Schwarz, M. Roy

2000-01-01

Reviews the definition of standards in general, and proposes a definition of standards and global minimum essential requirements for use in medical education. Aims to serve as a tool for the improvement of quality and international comparisons of basic medical programs. Explains the IIME (Institute for International Medical Education) project…

78 FR 6401 - Seventy Fifth Meeting: RTCA Special Committee 147, Minimum Operational Performance Standards for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-01-30

... Committee 147, Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems... Traffic Alert and Collision Avoidance Systems Airborne Equipment. SUMMARY: The FAA is issuing this notice... Performance Standards for Traffic Alert and Collision Avoidance Systems Airborne Equipment. DATES: The meeting...

25 CFR 36.22 - Standard VII-Elementary instructional program.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false Standard VII-Elementary instructional program. 36.22 Section 36.22 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum...

25 CFR 36.21 - Standard VI-Kindergarten instructional program.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false Standard VI-Kindergarten instructional program. 36.21 Section 36.21 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum...

25 CFR 36.21 - Standard VI-Kindergarten instructional program.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false Standard VI-Kindergarten instructional program. 36.21 Section 36.21 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum...

25 CFR 36.22 - Standard VII-Elementary instructional program.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false Standard VII-Elementary instructional program. 36.22 Section 36.22 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum...

25 CFR 63.12 - What are minimum standards of character?

Code of Federal Regulations, 2010 CFR

2010-04-01

... PROTECTION AND FAMILY VIOLENCE PREVENTION Minimum Standards of Character and Suitability for Employment § 63... guilty to any offense under Federal, state, or tribal law involving crimes of violence, sexual assault...

45 CFR 162.1102 - Standards for health care claims or equivalent encounter information transaction.

Code of Federal Regulations, 2014 CFR

2014-10-01

....) (ii) Dental health care claims. The ASC X12 Standards for Electronic Data Interchange Technical Report... Care Claim: Dental (837) ASC X12 Standards for Electronic Date Interchange Technical Report Type 3... care claims. The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care...

Proposed minimum reporting standards for chemical analysis Chemical Analysis Working Group (CAWG) Metabolomics Standards Initiative (MSI)

PubMed Central

Amberg, Alexander; Barrett, Dave; Beale, Michael H.; Beger, Richard; Daykin, Clare A.; Fan, Teresa W.-M.; Fiehn, Oliver; Goodacre, Royston; Griffin, Julian L.; Hankemeier, Thomas; Hardy, Nigel; Harnly, James; Higashi, Richard; Kopka, Joachim; Lane, Andrew N.; Lindon, John C.; Marriott, Philip; Nicholls, Andrew W.; Reily, Michael D.; Thaden, John J.; Viant, Mark R.

2013-01-01

There is a general consensus that supports the need for standardized reporting of metadata or information describing large-scale metabolomics and other functional genomics data sets. Reporting of standard metadata provides a biological and empirical context for the data, facilitates experimental replication, and enables the re-interrogation and comparison of data by others. Accordingly, the Metabolomics Standards Initiative is building a general consensus concerning the minimum reporting standards for metabolomics experiments of which the Chemical Analysis Working Group (CAWG) is a member of this community effort. This article proposes the minimum reporting standards related to the chemical analysis aspects of metabolomics experiments including: sample preparation, experimental analysis, quality control, metabolite identification, and data pre-processing. These minimum standards currently focus mostly upon mass spectrometry and nuclear magnetic resonance spectroscopy due to the popularity of these techniques in metabolomics. However, additional input concerning other techniques is welcomed and can be provided via the CAWG on-line discussion forum at http://msi-workgroups.sourceforge.net/ or http://Msi-workgroups-feedback@lists.sourceforge.net. Further, community input related to this document can also be provided via this electronic forum. PMID:24039616

28 CFR 50.24 - Annuity broker minimum qualifications.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Annuity broker minimum qualifications. 50....24 Annuity broker minimum qualifications. (a) Minimum standards. The Civil Division, United States Department of Justice, shall establish a list of annuity brokers who meet minimum qualifications for...

Technical Support Document for Version 3.6.1 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2009-09-29

This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.

[Minimum Standards for the Spatial Accessibility of Primary Care: A Systematic Review].

PubMed

Voigtländer, S; Deiters, T

2015-12-01

Regional disparities of access to primary care are substantial in Germany, especially in terms of spatial accessibility. However, there is no legally or generally binding minimum standard for the spatial accessibility effort that is still acceptable. Our objective is to analyse existing minimum standards, the methods used as well as their empirical basis. A systematic literature review was undertaken of publications regarding minimum standards for the spatial accessibility of primary care based on a title word and keyword search using PubMed, SSCI/Web of Science, EMBASE and Cochrane Library. 8 minimum standards from the USA, Germany and Austria could be identified. All of them specify the acceptable spatial accessibility effort in terms of travel time; almost half include also distance(s). The travel time maximum, which is acceptable, is 30 min and it tends to be lower in urban areas. Primary care is, according to the identified minimum standards, part of the local area (Nahbereich) of so-called central places (Zentrale Orte) providing basic goods and services. The consideration of means of transport, e. g. public transport, is heterogeneous. The standards are based on empirical studies, consultation with service providers, practical experiences, and regional planning/central place theory as well as on legal or political regulations. The identified minimum standards provide important insights into the effort that is still acceptable regarding spatial accessibility, i. e. travel time, distance and means of transport. It seems reasonable to complement the current planning system for outpatient care, which is based on provider-to-population ratios, by a gravity-model method to identify places as well as populations with insufficient spatial accessibility. Due to a lack of a common minimum standard we propose - subject to further discussion - to begin with a threshold based on the spatial accessibility limit of the local area, i. e. 30 min to the next primary care provider for at least 90% of the regional population. The exceeding of the threshold would necessitate a discussion of a health care deficit and in line with this a potential need for intervention, e. g. in terms of alternative forms of health care provision. © Georg Thieme Verlag KG Stuttgart · New York.

Lessons Learned and Technical Standards: A Logical Marriage

NASA Technical Reports Server (NTRS)

Gill, Paul; Vaughan, William W.; Garcia, Danny; Gill, Maninderpal S. (Technical Monitor)

2001-01-01

A comprehensive database of lessons learned that corresponds with relevant technical standards would be a boon to technical personnel and standards developers. The authors discuss the emergence of one such database within NASA, and show how and why the incorporation of lessons learned into technical standards databases can be an indispensable tool for government and industry. Passed down from parent to child, teacher to pupil, and from senior to junior employees, lessons learned have been the basis for our accomplishments throughout the ages. Government and industry, too, have long recognized the need to systematically document And utilize the knowledge gained from past experiences in order to avoid the repetition of failures and mishaps. The use of lessons learned is a principle component of any organizational culture committed to continuous improvement. They have formed the foundation for discoveries, inventions, improvements, textbooks, and technical standards. Technical standards are a very logical way to communicate these lessons. Using the time-honored tradition of passing on lessons learned while utilizing the newest in information technology, the National Aeronautics and Space Administration (NASA) has launched an intensive effort to link lessons learned with specific technical standards through various Internet databases. This article will discuss the importance of lessons learned to engineers, the difficulty in finding relevant lessons learned while engaged in an engineering project, and the new NASA project that can help alleviate this difficulty. The article will conclude with recommendations for more expanded cross-sectoral uses of lessons learned with reference to technical standards.

Green technology as a strategy in managing the black spots in Siak Highway, Indonesia

NASA Astrophysics Data System (ADS)

Sandhyavitri, A.; Wira, J.; Martin, A.

2018-04-01

It was identified that the total traffic accidents in the highway section of Siak, Indonesia within the period of 2011 to 2015 were 1,208 events (2 accidents per 3 days). This accidents figure were considered relatively high and it need to mitigate. The aim of this research are to; (i) analyze the location of Black Spot in the Siak highway, and (ii) drawn a strategy reducing the traffic accidents based on green technology. This study identified that the black spot area was located in the STA 44 + 050 (with a value of the weighted index was 86 and an accident severity rate was 6.21), these values were relatively high. The road horizontal alignment condition at this location was highlighted as a sub-standard high way, consists of low visibility, numerous turning pads, minimum road signs, and minimum road shoulders width. The technical strategy was then drawn as follow; conducting regular road rehabilitation and maintenance, equipping road markings and the street lights as well as road safety facilities based on the green technology such as solar cell traffic lights, solar cell street lights and deploying police statues in reducing traffic accidents within the black spot areas.

Validation of Minimum Display Requirements for a UAS Detect and Avoid System

NASA Technical Reports Server (NTRS)

Rorie, Conrad; Fern, Lisa; Roberts, Zach; Monk, Kevin; Santiago, Confesor; Shively, Jay

2017-01-01

The full integration of Unmanned Aircraft Systems (UAS) into the National Airspace System (NAS), a prerequisite for enabling a broad range of public and commercial UAS operations, presents several technical challenges to UAS developers, operators and regulators. A primary barrier is the inability for UAS pilots (situated at a ground control station, or GCS) to comply with Title 14 Code of Federal Regulations sections 91.111 and 91.113, which require pilots to see and avoid other aircraft in order to maintain well clear. The present study is the final in a series of human-in-the-loop experiments designed to explore and test the various display and alerting requirements being incorporated into the minimum operational performance standards (MOPS) for a UAS-specific detect and avoid system that would replace the see and avoid function required of manned aircraft. Two display configurations were tested - an integrated display and a standalone display - and their impact on pilot response times and ability to maintain DAA well clear were compared. Results indicated that the current draft of the MOPS result in high-level performance and did not meaningfully differ by display configuration.

Qualification Testing of Solid Rocket Booster Diagonal Strut Restraint Cable Assembly Part Number 10176-0031-102/103

NASA Technical Reports Server (NTRS)

Malone, T. W.

2006-01-01

This Technical Memorandum presents qualification test results for solid rocket booster diagonal strut restraint cable part number 101276-00313-102/103. During flight this assembly is exposed to a range of temperatures. MIL-W-83420 shows the breaking strength of the cable as 798 kg (1,760 lb) at room temperature but does not define cable strength at the maximum temperature to which the cable is exposed during the first 2 min of flight; 669 C (1,236 F). The cable, which can be built from different corrosion resistant steel alloys, may also vary in its chemical, physical, and mechanical properties at temperature. Negative margins of safety were produced by analysis of the cable at temperature using standard knockdown factors. However, MSFC-HDBK-5 allows the use of a less conservative safety factor of 1.4 and knockdown factors verified by testing. Test results allowed a calculated knockdown factor of 0.1892 to be determined for the restraint cables, which provides a minimum breaking strength of 151 kg (333 lb) at 677 C (1,250 F) when combined with the minimum breaking strength of 0.317-cm (0.125- or 1/8-in) diameter, type 1 composition rope.

75 FR 35021 - Reliability Standards Development and NERC and Regional Entity Enforcement; Notice of Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-21

... Standards Development and NERC and Regional Entity Enforcement; Notice of Technical Conference June 15, 2010... Technical Conference to address industry perspectives on certain issues pertaining to the development and... Electric Reliability Organization's (ERO) standards development process; communication and interactions...

75 FR 39023 - Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-07

... Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for Federal... Drug Testing Programs (Mandatory Guidelines). The Mandatory Guidelines were first published in the... of Laboratories Engaged in Urine Drug Testing for Federal Agencies,'' sets strict standards that...

75 FR 27348 - Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-05-14

... Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for Federal... Drug Testing Programs (Mandatory Guidelines). The Mandatory Guidelines were first published in the... of Laboratories Engaged in Urine Drug Testing for Federal Agencies,'' sets strict standards that...

75 FR 9229 - Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-03-01

... Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for Federal... Drug Testing Programs (Mandatory Guidelines). The Mandatory Guidelines were first published in the... of Laboratories Engaged in Urine Drug Testing for Federal Agencies,'' sets strict standards that...

75 FR 5088 - Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-01

... Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for Federal... Drug Testing Programs (Mandatory Guidelines). The Mandatory Guidelines were first published in the... of Laboratories Engaged in Urine Drug Testing for Federal Agencies,'' sets strict standards that...

75 FR 154 - Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-04

... Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for Federal... Drug Testing Programs (Mandatory Guidelines). The Mandatory Guidelines were first published in the... of Laboratories Engaged in Urine Drug Testing for Federal Agencies,'' sets strict standards that...

75 FR 45128 - Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-02

... Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for Federal... Drug Testing Programs (Mandatory Guidelines). The Mandatory Guidelines were first published in the..., ``Certification of Laboratories Engaged in Urine Drug Testing for Federal Agencies,'' sets strict standards that...

75 FR 32950 - Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-10

... Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for Federal... Drug Testing Programs (Mandatory Guidelines). The Mandatory Guidelines were first published in the... of Laboratories Engaged in Urine Drug Testing for Federal Agencies,'' sets strict standards that...

75 FR 55795 - Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-14

... Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for Federal... Drug Testing Programs (Mandatory Guidelines). The Mandatory Guidelines were first published in the... of Laboratories Engaged in Urine Drug Testing for Federal Agencies,'' sets strict standards that...

Minimum Information about a Cardiac Electrophysiology Experiment (MICEE): Standardised Reporting for Model Reproducibility, Interoperability, and Data Sharing

PubMed Central

Quinn, TA; Granite, S; Allessie, MA; Antzelevitch, C; Bollensdorff, C; Bub, G; Burton, RAB; Cerbai, E; Chen, PS; Delmar, M; DiFrancesco, D; Earm, YE; Efimov, IR; Egger, M; Entcheva, E; Fink, M; Fischmeister, R; Franz, MR; Garny, A; Giles, WR; Hannes, T; Harding, SE; Hunter, PJ; Iribe, G; Jalife, J; Johnson, CR; Kass, RS; Kodama, I; Koren, G; Lord, P; Markhasin, VS; Matsuoka, S; McCulloch, AD; Mirams, GR; Morley, GE; Nattel, S; Noble, D; Olesen, SP; Panfilov, AV; Trayanova, NA; Ravens, U; Richard, S; Rosenbaum, DS; Rudy, Y; Sachs, F; Sachse, FB; Saint, DA; Schotten, U; Solovyova, O; Taggart, P; Tung, L; Varró, A; Volders, PG; Wang, K; Weiss, JN; Wettwer, E; White, E; Wilders, R; Winslow, RL; Kohl, P

2011-01-01

Cardiac experimental electrophysiology is in need of a well-defined Minimum Information Standard for recording, annotating, and reporting experimental data. As a step toward establishing this, we present a draft standard, called Minimum Information about a Cardiac Electrophysiology Experiment (MICEE). The ultimate goal is to develop a useful tool for cardiac electrophysiologists which facilitates and improves dissemination of the minimum information necessary for reproduction of cardiac electrophysiology research, allowing for easier comparison and utilisation of findings by others. It is hoped that this will enhance the integration of individual results into experimental, computational, and conceptual models. In its present form, this draft is intended for assessment and development by the research community. We invite the reader to join this effort, and, if deemed productive, implement the Minimum Information about a Cardiac Electrophysiology Experiment standard in their own work. PMID:21745496

MINIMUM STANDARDS FOR APPROVAL OF GUIDANCE PROGRAMS IN SMALL HIGH SCHOOLS.

ERIC Educational Resources Information Center

New Mexico State Dept. of Education, Santa Fe.

A SMALL HIGH SCHOOL IS DEFINED AS ONE WITH AN ENROLLMENT OF 150 STUDENTS OR LESS IN GRADES 7-12 OR IN GRADES 9-12. THE MINIMUM GUIDANCE PROGRAM STANDARDS FOR SMALL HIGH SCHOOLS, AS PRESCRIBED BY THE NEW MEXICO DEPARTMENT OF EDUCATION, INCLUDE THE FOLLOWING REQUIREMENTS--(1) ONE PERSON WITH A MINIMUM OF SIX SEMESTER HOURS IN GUIDANCE MUST BE…

Calculation of Appropriate Minimum Size of Isolation Rooms based on Questionnaire Survey of Experts and Analysis on Conditions of Isolation Room Use

NASA Astrophysics Data System (ADS)

Won, An-Na; Song, Hae-Eun; Yang, Young-Kwon; Park, Jin-Chul; Hwang, Jung-Ha

2017-07-01

After the outbreak of the MERS (Middle East Respiratory Syndrome) epidemic, issues were raised regarding response capabilities of medical institutions, including the lack of isolation rooms at hospitals. Since then, the government of Korea has been revising regulations to enforce medical laws in order to expand the operation of isolation rooms and to strengthen standards regarding their mandatory installation at hospitals. Among general and tertiary hospitals in Korea, a total of 159 are estimated to be required to install isolation rooms to meet minimum standards. For the purpose of contributing to hospital construction plans in the future, this study conducted a questionnaire survey of experts and analysed the environment and devices necessary in isolation rooms, to determine their appropriate minimum size to treat patients. The result of the analysis is as follows: First, isolation rooms at hospitals are required to have a minimum 3,300mm minor axis and a minimum 5,000mm major axis for the isolation room itself, and a minimum 1,800mm minor axis for the antechamber where personal protective equipment is donned and removed. Second, the 15 ㎡-or-larger standard for the floor area of isolation rooms will have to be reviewed and standards for the minimum width of isolation rooms will have to be established.

Waste-form development for conversion to portland cement at Los Alamos National Laboratory (LANL) Technical Area 55 (TA-55)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veazey, G.W.; Schake, A.R.; Shalek, P.D.

1996-10-01

The process used at TA-55 to cement transuranic (TRU) waste has experienced several problems with the gypsum-based cement currently being used. Specifically, the waste form could not reliably pass the Waste Isolation Pilot Plant (WIPP) prohibition for free liquid and the Environmental Protection Agency (EPA)-Toxicity Characteristic Leaching Procedure (TCLP) standard for chromium. This report describes the project to develop a portland cement-based waste form that ensures compliance to these standards, as well as other performance standards consisting of homogeneous mixing, moderate hydration temperature, timely initial set, and structural durability. Testing was conducted using the two most common waste streams requiringmore » cementation as of February 1994, lean residue (LR)- and oxalate filtrate (OX)-based evaporator bottoms (EV). A formulation with a pH of 10.3 to 12.1 and a minimum cement-to-liquid (C/L) ratio of 0.80 kg/l for OX-based EV and 0.94 kg/L for LR-based EV was found to pass the performance standards chosen for this project. The implementation of the portland process should result in a yearly cost savings for raw materials of approximately $27,000 over the gypsum process.« less

7 CFR 1728.50 - Removal of an item from listing or technical acceptance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... equipment will be notified in writing of a proposal to remove such item from the listing or technical... unanimous, the item will be referred to Technical Standards Committee “B.” Written notice of Technical...” decision, a sponsor may appeal in writing to Technical Standards Committee “B” to review Committee “A's...

7 CFR 1728.30 - Inclusion of an item for listing or technical acceptance.

Code of Federal Regulations, 2010 CFR

2010-01-01

... be referred to Technical Standards Committee “B.” Written notice of Technical Standards Committee “A... 7 Agriculture 11 2010-01-01 2010-01-01 false Inclusion of an item for listing or technical... AND CONSTRUCTION § 1728.30 Inclusion of an item for listing or technical acceptance. (a) Scope. RUS...

Identifying Needed Technical Standards: The LITA TESLA Committee at Work.

ERIC Educational Resources Information Center

Carter, Ruth C.

1984-01-01

Efforts of the Technical Standards for Library Automation Committee (TESLA), a division-wide committee of the Library Information and Technology Association (LITA) of the American Library Association, are described. The current status of suggested technical standards and recommended action are detailed. Five sources are given. (Author/EJS)

77 FR 56764 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-09-14

... August 31, 2012. Ray Towles, Deputy Director, Flight Standards Service. Adoption of the Amendment... Muni, RNAV (GPS) RWY 36, Amdt 1 Mountain View, CA, Moffett Federal Airfield, Takeoff Minimums and...

76 FR 78215 - Possession, Use, and Transfer of Select Agents and Toxins; Biennial Review; Proposed Rule

Federal Register 2010, 2011, 2012, 2013, 2014

2011-12-16

... agents and toxins list; whether minimum standards for personnel reliability, physical and cyber security... toxins list; (3) whether minimum standards for personnel reliability, physical and cyber security should...

77 FR 42627 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-20

... CONTACT: Richard A. Dunham III, Flight Procedure Standards Branch (AFS-420), Flight Technologies and... 2012 Red Cloud, NE., Red Cloud Muni, Takeoff Minimums and Obstacle DP, Orig Effective 23 AUGUST 2012...

Steps to standardization and validation of hippocampal volumetry as a biomarker in clinical trials and diagnostic criteria for Alzheimer’s disease

PubMed Central

Jack, Clifford R; Barkhof, Frederik; Bernstein, Matt A; Cantillon, Marc; Cole, Patricia E; DeCarli, Charles; Dubois, Bruno; Duchesne, Simon; Fox, Nick C; Frisoni, Giovanni B; Hampel, Harald; Hill, Derek LG; Johnson, Keith; Mangin, Jean-François; Scheltens, Philip; Schwarz, Adam J; Sperling, Reisa; Suhy, Joyce; Thompson, Paul M; Weiner, Michael; Foster, Norman L

2012-01-01

Background The promise of Alzheimer’s disease (AD) biomarkers has led to their incorporation in new diagnostic criteria and in therapeutic trials; however, significant barriers exist to widespread use. Chief among these is the lack of internationally accepted standards for quantitative metrics. Hippocampal volumetry is the most widely studied quantitative magnetic resonance imaging (MRI) measure in AD and thus represents the most rational target for an initial effort at standardization. Methods and Results The authors of this position paper propose a path toward this goal. The steps include: 1) Establish and empower an oversight board to manage and assess the effort, 2) Adopt the standardized definition of anatomic hippocampal boundaries on MRI arising from the EADC-ADNI hippocampal harmonization effort as a Reference Standard, 3) Establish a scientifically appropriate, publicly available Reference Standard Dataset based on manual delineation of the hippocampus in an appropriate sample of subjects (ADNI), and 4) Define minimum technical and prognostic performance metrics for validation of new measurement techniques using the Reference Standard Dataset as a benchmark. Conclusions Although manual delineation of the hippocampus is the best available reference standard, practical application of hippocampal volumetry will require automated methods. Our intent is to establish a mechanism for credentialing automated software applications to achieve internationally recognized accuracy and prognostic performance standards that lead to the systematic evaluation and then widespread acceptance and use of hippocampal volumetry. The standardization and assay validation process outlined for hippocampal volumetry is envisioned as a template that could be applied to other imaging biomarkers. PMID:21784356

Use of a Real-Time Training Software (Laerdal QCPR®) Compared to Instructor-Based Feedback for High-Quality Chest Compressions Acquisition in Secondary School Students: A Randomized Trial.

PubMed

Cortegiani, Andrea; Russotto, Vincenzo; Montalto, Francesca; Iozzo, Pasquale; Meschis, Roberta; Pugliesi, Marinella; Mariano, Dario; Benenati, Vincenzo; Raineri, Santi Maurizio; Gregoretti, Cesare; Giarratano, Antonino

2017-01-01

High-quality chest compressions are pivotal to improve survival from cardiac arrest. Basic life support training of school students is an international priority. The aim of this trial was to assess the effectiveness of a real-time training software (Laerdal QCPR®) compared to a standard instructor-based feedback for chest compressions acquisition in secondary school students. After an interactive frontal lesson about basic life support and high quality chest compressions, 144 students were randomized to two types of chest compressions training: 1) using Laerdal QCPR® (QCPR group- 72 students) for real-time feedback during chest compressions with the guide of an instructor who considered software data for students' correction 2) based on standard instructor-based feedback (SF group- 72 students). Both groups had a minimum of a 2-minute chest compressions training session. Students were required to reach a minimum technical skill level before the evaluation. We evaluated all students at 7 days from the training with a 2-minute chest compressions session. The primary outcome was the compression score, which is an overall measure of chest compressions quality calculated by the software expressed as percentage. 125 students were present at the evaluation session (60 from QCPR group and 65 from SF group). Students in QCPR group had a significantly higher compression score (median 90%, IQR 81.9-96.0) compared to SF group (median 67%, IQR 27.7-87.5), p = 0.0003. Students in QCPR group performed significantly higher percentage of fully released chest compressions (71% [IQR 24.5-99.0] vs 24% [IQR 2.5-88.2]; p = 0.005) and better chest compression rate (117.5/min [IQR 106-123.5] vs 125/min [115-135.2]; p = 0.001). In secondary school students, a training for chest compressions based on a real-time feedback software (Laerdal QCPR®) guided by an instructor is superior to instructor-based feedback training in terms of chest compression technical skill acquisition. Australian New Zealand Clinical Trials Registry ACTRN12616000383460.

Aspects of the dimensional changes of jersey structures after knitting process

NASA Astrophysics Data System (ADS)

Szabo, M.; Barbu, I.; Jiaru, L.

2017-08-01

The study proposes a statistical analysis by applying a mathematical model for the study of the dimensional changes of jersey structures made of 100% cotton yarn, with 58/1 metric count of yarn. The Structures are presented as tubular knitted metrage and are designed for underwear and/or outer garments. By analysing the jersey structures, from dimensional stability point of view, there can be observed that values in the limits are within the ±2% interval, values which are considered appropriate. Following the experimental researches, there are proposed solutions for the reduction of dimensional changes on both directions of the knit, on the stich course direction and also on the stich courses in vertical direction, being analyzed the behaviour of the knitted fabrics during relaxation after knitting process. The problem of the dimensional stability of the knitted fabrics is extensive researched. The knitted structures are elastic structures, this being a reason for which dimensional stability will always be a topical theme. The jersey structures, due to the distribution of the platinum loop in the knit plane, due to the relative small number of yarn-yarn contact points that causes the threads to slide into the structure, due to the spiral of the tubular metrage structure, are among those whose dimensional stability is difficult to control. The technical characteristics of the yarns, the technical characteristics of the knitting machines and the technological parameters of the knitting machine are the elements which will be correlated in order to obtain structures with minimum dimensional changes. In order to obtain knitted structures with adequate dimensional stability, this means within ±2%, it is necessary that the dimensional changes during the relaxation periods after knitting and chemical finishing being minimum. For this, all the processes to be applied will be conducted with appropriate and uniform tensions throughout the technological flow. The relaxation periods of 72 hours should be strictly respected, folded and under standard atmospheric conditions, both after knitting and after chemical finishing. The jersey structures are plane structured made on knitting machines equiped with font. There will be analyzed the dimensional changes of the jersey structures made of 100% cotton yarn, Nm 58/1, after the relaxation after knitting process througout the corelation between the technical characteristics of the yarns, of the technological parameter of the knitting operation and of some technical characteristici of the knitting machine.

42 CFR 493.1411 - Standard; Technical consultant qualifications.

Code of Federal Regulations, 2010 CFR

2010-10-01

... training or experience to provide technical consultation for each of the specialties and subspecialties of... responsible. Note: The technical consultant requirements for “laboratory training or experience, or both” in... 42 Public Health 5 2010-10-01 2010-10-01 false Standard; Technical consultant qualifications. 493...

7 CFR 652.4 - Technical service standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... technologies and practices. (c) A technical service provider must assume responsibility in writing for the... 7 Agriculture 6 2010-01-01 2010-01-01 false Technical service standards. 652.4 Section 652.4..., DEPARTMENT OF AGRICULTURE SUPPORT ACTIVITIES TECHNICAL SERVICE PROVIDER ASSISTANCE General Provisions § 652.4...

Impact of the reduced vertical separation minimum on the domestic United States

DOT National Transportation Integrated Search

2009-01-31

Aviation regulatory bodies have enacted the reduced vertical separation minimum standard over most of the globe. The reduced vertical separation minimum is a technique that reduces the minimum vertical separation distance between aircraft from 2000 t...

ETHOS CLEAN

EPA Pesticide Factsheets

Technical product bulletin: this surface washing agent used in oil spill cleanups has a minimum 30 minutes recommended soak time. Can be used with salt or fresh water, on hard surfaces, shorelines, rocks, and beaches.

50 CFR 648.50 - Shell-height standard.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Shell-height standard. 648.50 Section 648... Atlantic Sea Scallop Fishery § 648.50 Shell-height standard. (a) Minimum shell height. The minimum shell height for in-shell scallops that may be landed, or possessed at or after landing, is 3.5 inches (8.9 cm...

50 CFR 648.50 - Shell-height standard.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Shell-height standard. 648.50 Section 648... Atlantic Sea Scallop Fishery § 648.50 Shell-height standard. (a) Minimum shell height. The minimum shell height for in-shell scallops that may be landed, or possessed at or after landing, is 3.5 inches (8.9 cm...

24 CFR Appendix A to Part 200 - Standards Incorporated by Reference in the Minimum Property Standards for Housing (HUD Handbook...

Code of Federal Regulations, 2012 CFR

2012-04-01

... Design Specification for Wood Construction—1991. American National Standards Institute, 11 West 42nd... Street, New York, NY 10017. ASCE 7-88 Minimum Design Loads for Buildings and Other Structures (Formerly... Institute Building, College Park, MD 20740 Telephone (301) 277-4258. MSI-1-81 Thickness Design—Asphalt...

24 CFR Appendix A to Part 200 - Standards Incorporated by Reference in the Minimum Property Standards for Housing (HUD Handbook...

Code of Federal Regulations, 2011 CFR

2011-04-01

... Design Specification for Wood Construction—1991. American National Standards Institute, 11 West 42nd... Street, New York, NY 10017. ASCE 7-88 Minimum Design Loads for Buildings and Other Structures (Formerly... Institute Building, College Park, MD 20740 Telephone (301) 277-4258. MSI-1-81 Thickness Design—Asphalt...

24 CFR Appendix A to Part 200 - Standards Incorporated by Reference in the Minimum Property Standards for Housing (HUD Handbook...

Code of Federal Regulations, 2013 CFR

2013-04-01

... Design Specification for Wood Construction—1991. American National Standards Institute, 11 West 42nd... Street, New York, NY 10017. ASCE 7-88 Minimum Design Loads for Buildings and Other Structures (Formerly... Institute Building, College Park, MD 20740 Telephone (301) 277-4258. MSI-1-81 Thickness Design—Asphalt...

24 CFR Appendix A to Part 200 - Standards Incorporated by Reference in the Minimum Property Standards for Housing (HUD Handbook...

Code of Federal Regulations, 2014 CFR

2014-04-01

... Design Specification for Wood Construction—1991. American National Standards Institute, 11 West 42nd... Street, New York, NY 10017. ASCE 7-88 Minimum Design Loads for Buildings and Other Structures (Formerly... Institute Building, College Park, MD 20740 Telephone (301) 277-4258. MSI-1-81 Thickness Design—Asphalt...

24 CFR Appendix A to Part 200 - Standards Incorporated by Reference in the Minimum Property Standards for Housing (HUD Handbook...

Code of Federal Regulations, 2010 CFR

2010-04-01

... Design Specification for Wood Construction—1991. American National Standards Institute, 11 West 42nd... Street, New York, NY 10017. ASCE 7-88 Minimum Design Loads for Buildings and Other Structures (Formerly... Institute Building, College Park, MD 20740 Telephone (301) 277-4258. MSI-1-81 Thickness Design—Asphalt...

78 FR 32476 - Models for Plant-Specific Adoption of Technical Specifications Task Force Traveler TSTF-426...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-30

... Standard Technical Specification (STS): NUREG-1432, ``Standard Technical Specifications Combustion..., Washington, DC 20555- 0001. SUPPLEMENTARY INFORMATION: TSTF-426, Revision 5, is applicable to all Combustion...

5 CFR 551.301 - Minimum wage.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 1 2010-01-01 2010-01-01 false Minimum wage. 551.301 Section 551.301... FAIR LABOR STANDARDS ACT Minimum Wage Provisions Basic Provision § 551.301 Minimum wage. (a)(1) Except... employees wages at rates not less than the minimum wage specified in section 6(a)(1) of the Act for all...

The minimum follow-up required for radial head arthroplasty: a meta-analysis.

PubMed

Laumonerie, P; Reina, N; Kerezoudis, P; Declaux, S; Tibbo, M E; Bonnevialle, N; Mansat, P

2017-12-01

The primary aim of this study was to define the standard minimum follow-up required to produce a reliable estimate of the rate of re-operation after radial head arthroplasty (RHA). The secondary objective was to define the leading reasons for re-operation. Four electronic databases, between January 2000 and March 2017 were searched. Articles reporting reasons for re-operation (Group I) and results (Group II) after RHA were included. In Group I, a meta-analysis was performed to obtain the standard minimum follow-up, the mean time to re-operation and the reason for failure. In Group II, the minimum follow-up for each study was compared with the standard minimum follow-up. A total of 40 studies were analysed: three were Group I and included 80 implants and 37 were Group II and included 1192 implants. In Group I, the mean time to re-operation was 1.37 years (0 to 11.25), the standard minimum follow-up was 3.25 years; painful loosening was the main indication for re-operation. In Group II, 33 Group II articles (89.2%) reported a minimum follow-up of < 3.25 years. The literature does not provide a reliable estimate of the rate of re-operation after RHA. The reproducibility of results would be improved by using a minimum follow-up of three years combined with a consensus of the definition of the reasons for failure after RHA. Cite this article: Bone Joint J 2017;99-B:1561-70. ©2017 The British Editorial Society of Bone & Joint Surgery.

Development of a Minimum Performance Standard for Lavatory Trash Receptacle Automatic Fire Extinguishers

DOT National Transportation Integrated Search

1997-02-01

This report contains a summary of the work performed during the development of a minimum performance standard for lavatory trash receptacle automatic fire extinguishers. The developmental work was performed under the direction of the International Ha...

Rules and Regulations: Minimum Schoolhouse Construction Standards.

ERIC Educational Resources Information Center

Arkansas State Dept. of Education, Little Rock.

Regulatory guidelines governing the minimum schoolhouse construction standards as well as rules for new construction applications, school site selection, and approval procedures are presented. Appendices (comprising 95 percent of the publication) document the following: educational space guidelines; planning for modern education; school…

Digital data collection in paleoanthropology.

PubMed

Reed, Denné; Barr, W Andrew; Mcpherron, Shannon P; Bobe, René; Geraads, Denis; Wynn, Jonathan G; Alemseged, Zeresenay

2015-01-01

Understanding patterns of human evolution across space and time requires synthesizing data collected by independent research teams, and this effort is part of a larger trend to develop cyber infrastructure and e-science initiatives. At present, paleoanthropology cannot easily answer basic questions about the total number of fossils and artifacts that have been discovered, or exactly how those items were collected. In this paper, we examine the methodological challenges to data integration, with the hope that mitigating the technical obstacles will further promote data sharing. At a minimum, data integration efforts must document what data exist and how the data were collected (discovery), after which we can begin standardizing data collection practices with the aim of achieving combined analyses (synthesis). This paper outlines a digital data collection system for paleoanthropology. We review the relevant data management principles for a general audience and supplement this with technical details drawn from over 15 years of paleontological and archeological field experience in Africa and Europe. The system outlined here emphasizes free open-source software (FOSS) solutions that work on multiple computer platforms; it builds on recent advances in open-source geospatial software and mobile computing. © 2015 Wiley Periodicals, Inc.

Italian chapter of the International Society of cardiovascular ultrasound expert consensus document on training requirements for noncardiologists using hand-carried ultrasound devices.

PubMed

Pelliccia, Francesco; Palmiero, Pasquale; Maiello, Maria; Losi, Maria-Angela

2012-07-01

Hand-carried ultrasound devices (HCDs), also named personal use echo, are pocket-size, compact, and battery-equipped echocardiographic systems. They have limited technical capabilities but offer some advantages compared with standard echocardiographic devices due to their simplicity of use, immediate availability at the patient's bedside, transportability, and relatively low cost. Current HCDs are considered as screening tools and are used to complement the physical examination by cardiologists. Many noncardiologic subspecialists, however, have adopted this technologic advancement rapidly raising the concern of an inappropriate use of HCD by health professionals who do not have any specific training. In keeping with the mission of the International Society of Cardiovascular Ultrasound to advance the science and art of cardiovascular ultrasound and encourage the knowledge of this subject, the purpose of this Expert Consensus document is to focus on the training for all health care professionals considering the use of HCD. Accordingly, this paper summarizes general aspects of HCD, such as technical characteristics and clinical indications, and then details the specific training requirements for noncardiologists (i.e., training program, minimum case load, duration, and certification of competence). © 2012, Wiley Periodicals, Inc.

Do Formal Inspections Ensure that British Zoos Meet and Improve on Minimum Animal Welfare Standards?

PubMed Central

Draper, Chris; Browne, William; Harris, Stephen

2013-01-01

Simple Summary Key aims of the formal inspections of British zoos are to assess compliance with minimum standards of animal welfare and promote improvements in animal care and husbandry. We compared reports from two consecutive inspections of 136 British zoos to see whether these goals were being achieved. Most zoos did not meet all the minimum animal welfare standards and there was no clear evidence of improving levels of compliance with standards associated with the Zoo Licensing Act 1981. The current system of licensing and inspection does not ensure that British zoos meet and maintain, let alone exceed, the minimum animal welfare standards. Abstract We analysed two consecutive inspection reports for each of 136 British zoos made by government-appointed inspectors between 2005 and 2011 to assess how well British zoos were complying with minimum animal welfare standards; median interval between inspections was 1,107 days. There was no conclusive evidence for overall improvements in the levels of compliance by British zoos. Having the same zoo inspector at both inspections affected the outcome of an inspection; animal welfare criteria were more likely to be assessed as unchanged if the same inspector was present on both inspections. This, and erratic decisions as to whether a criterion applied to a particular zoo, suggest inconsistency in assessments between inspectors. Zoos that were members of a professional association (BIAZA) did not differ significantly from non-members in the overall number of criteria assessed as substandard at the second inspection but were more likely to meet the standards on both inspections and less likely to have criteria remaining substandard. Lack of consistency between inspectors, and the high proportion of zoos failing to meet minimum animal welfare standards nearly thirty years after the Zoo Licensing Act came into force, suggest that the current system of licensing and inspection is not meeting key objectives and requires revision. PMID:26479752

Regaining Lost Separation in a Piloted Simulation of Autonomous Aircraft Operations

NASA Technical Reports Server (NTRS)

Barhydt, Richard; Eischeid, Todd M.; Palmer, Michael T.; Wing, David J.

2002-01-01

NASA is currently investigating a new concept of operations for the National Airspace System, designed to improve capacity while maintaining or improving current levels of safety. This concept, known as Distributed Air/Ground Traffic Management (DAG-TM), allows appropriately equipped autonomous aircraft to maneuver freely for flight optimization while resolving conflicts with other traffic and staying out of special use airspace and hazardous weather. While Airborne Separation Assurance System (ASAS) tools would normally allow pilots to resolve conflicts before they become hazardous, evaluation of system performance in sudden, near-term conflicts is needed in order to determine concept feasibility. If an acceptable safety level can be demonstrated in these situations, then operations may be conducted with lower separation minimums. An experiment was conducted in NASA Langley s Air Traffic Operations Lab to address issues associated with resolving near-term conflicts and the potential use of lower separation minimums. Sixteen commercial airline pilots flew a total of 32 traffic scenarios that required them to use prototype ASAS tools to resolve close range pop-up conflicts. Required separation standards were set at either 3 or 5 NM lateral spacing, with 1000 ft vertical separation being used for both cases. Reducing the lateral separation from 5 to 3 NM did not appear to increase operational risk, as indicated by the proximity to the intruder aircraft. Pilots performed better when they followed tactical guidance cues provided by ASAS than when they didn't follow the guidance. As air-air separation concepts are evolved, further studies will consider integration issues between ASAS and existing Airborne Collision Avoidance Systems (ACAS).These types of non-normal events will require the ASAS to provide effective alerts and resolutions prior to the time that an Airborne Collision Avoidance System (ACAS) would give a Resolution Advisory (RA). When an RA is issued, a pilot must take immediate action in order to avoid a potential near miss. The Traffic Alert and Collision Avoidance System (TCAS) II currently functions as an ACAS aboard commercial aircraft. Depending on the own aircraft s altitude, TCAS only issues RA s 15-35 seconds prior to the Closest Point of Approach (CPA). Prior to an RA, DAG-TM pilots operating autonomous aircraft must rely solely on ASAS for resolution guidance. An additional area of DAG-TM concept feasibility relates to a potential reduction in separation standards. Lower separation standards are likely needed in order to improve NAS efficiency and capacity. Current separation minimums are based in large part on the capabilities of older radar systems. Safety assessments are needed to determine the feasibility of reduced separation minimums. They will give strong consideration to surveillance system performance, including accuracy, integrity, and availability. Candidate surveillance systems include Automatic Dependent Surveillance-Broadcast (ADS-B) and multi-lateration systems. Considering studies done for Reduced Vertical Separation Minimums (RVSM) operations, it is likely that flight technical errors will also be considered. In addition to a thorough evaluation of surveillance system performance, a potential decision to lower the separation standards should also take operational considerations into account. An ASAS Safety Assessment study identified improper maneuvering in response to a conflict (due to ambiguous or improper resolution commands or a pilot s failure to comply with the resolution) as a potential safety risk. If near-term conflicts with lower separation minimums were determined to be more challenging for pilots, the severity of these risks could be even greater.

47 CFR 90.548 - Interoperability Technical Standards.

Code of Federal Regulations, 2014 CFR

2014-10-01

... Specification—New Technology Standards Project—Digital Radio Technical Standards, approved March 2005. (v) ANSI/TIA-102.BAEE-B-2010, Project 25 Radio Management Protocols—New Technology Standards Project—Digital... 2003. (iii) ANSI/TIA-102.BAEA-B-2012, Project 25 Data Overview—New Technology Standards Project—Digital...

Method for Household Refrigerators Efficiency Increasing

NASA Astrophysics Data System (ADS)

Lebedev, V. V.; Sumzina, L. V.; Maksimov, A. V.

2017-11-01

The relevance of working processes parameters optimization in air conditioning systems is proved in the work. The research is performed with the use of the simulation modeling method. The parameters optimization criteria are considered, the analysis of target functions is given while the key factors of technical and economic optimization are considered in the article. The search for the optimal solution at multi-purpose optimization of the system is made by finding out the minimum of the dual-target vector created by the Pareto method of linear and weight compromises from target functions of the total capital costs and total operating costs. The tasks are solved in the MathCAD environment. The research results show that the values of technical and economic parameters of air conditioning systems in the areas relating to the optimum solutions’ areas manifest considerable deviations from the minimum values. At the same time, the tendencies for significant growth in deviations take place at removal of technical parameters from the optimal values of both the capital investments and operating costs. The production and operation of conditioners with the parameters which are considerably deviating from the optimal values will lead to the increase of material and power costs. The research allows one to establish the borders of the area of the optimal values for technical and economic parameters at air conditioning systems’ design.

Evaluation of Factors that Contribute to Improving Academic Achievement of Career and Technical Education Students in Rhode Island

ERIC Educational Resources Information Center

Marsella, Anthony J.

2010-01-01

The primary purpose of this study was to gain a deeper understanding of career and technical education in Rhode Island utilizing Program Approval Process: Standards, Instruments, and Protocols. The process establishes standards for quality career and technical education. The population surveyed provided data on Standard Two: Curriculum and…

45 CFR 162.1802 - Standards for coordination of benefits information transaction.

Code of Federal Regulations, 2014 CFR

2014-10-01

....) (ii) The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim... X12 Standards for Electronic Date Interchange Technical Report Type 3, October 2007, ASC X12N... Interchange Technical Report Type 3—Health Care Claim: Professional (837), May 2006, ASC X12N/005010X222...

45 CFR 162.1802 - Standards for coordination of benefits information transaction.

Code of Federal Regulations, 2010 CFR

2010-10-01

....) (ii) The ASC X12 Standards for Electronic Data Interchange Technical Report Type 3—Health Care Claim... X12 Standards for Electronic Date Interchange Technical Report Type 3, October 2007, ASC X12N... Interchange Technical Report Type 3—Health Care Claim: Professional (837), May 2006, ASC X12N/005010X222...

New Mexico Standards Based Assessment (NMSBA) Technical Report: 2006 Spring Administration

ERIC Educational Resources Information Center

Griph, Gerald W.

2006-01-01

The purpose of the NMSBA technical report is to provide users and other interested parties with a general overview of and technical characteristics of the 2006 NMSBA. The 2006 technical report contains the following information: (1) Test development; (2) Scoring procedures; (3) Calibration, scaling, and equating procedures; (4) Standard setting;…

A Revision of Technical Mathematics Based on the NCTM Standards. Final Report.

ERIC Educational Resources Information Center

Near, Barbara

Between 1993 and 1996, Henry Ford Community College (Michigan) worked with business, industry, and technical instructors to revise their Technical Mathematics program in accordance with the National Council of Teachers of Mathematics (NCTM) Standards. The purpose of the project was to restructure the technical math curriculum and create a context…

75 FR 16813 - Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-02

... Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for Federal... Drug Testing Programs (Mandatory Guidelines). The Mandatory Guidelines were first published in the... of [[Page 16814

Technical and Organizational Lessons Learned From More Than One Decade of the International GNSS Service Global Tracking Network

NASA Astrophysics Data System (ADS)

Moore, A. W.

2007-12-01

The International GNSS Service (IGS) is a voluntary collaboration of more than 200 worldwide agencies that pool resources to generate precise GPS and GLONASS products. The foundation of the IGS is a global network of 385 permanent, continuous, geodetic-quality stations independently operated by about 100 agencies. The IGS Central Bureau develops minimum functional requirements and operational standards that enable the individual stations' data to be used coherently in global analyses, but the IGS remains vendor neutral, leaving procurement decisions and implementation details to the individual agencies. The IGS network is hence quite heterogeneous in instrumentation, station management strategies, and culture; these diversities bring both strengths and challenges in coordination. This presentation will detail the IGS's approaches, successes, and opportunities for improvement in coordinating and monitoring the collaborative network.

Radical prostatectomy in the 21st century - the gold standard for localized and locally advanced prostate cancer.

PubMed

Schostak, M; Miller, K; Schrader, M

2008-01-01

Radical prostatectomy for treatment of prostate cancer is a technically sophisticated operation. Simpler therapies have therefore been developed in the course of decades. The decisive advantage of a radical operation is the chance of a cure with minimal collateral damage. It is the only approach that enables precise tumor staging. The 10-year progression-free survival probability is approximately 85% for a localized tumor with negative resection margins. This high cure rate is unsurpassed by competitive treatment modalities. Nowadays, experienced surgeons achieve excellent functional results (for example, recovery of continence and erectile function) with minimum morbidity. Even in the locally advanced stage, results are very good compared to those obtained with other treatment modalities. Pathological staging enables stratified adjuvant therapy based on concrete information. The overall prognosis can thus be significantly improved.

76 FR 52239 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-08-22

... Minimums & Obstacle DP, Orig-A Red Oak, IA, Red Oak Muni, Takeoff Minimums & Obstacle DP, Amdt 3 Storm Lake, IA, Storm Lake Muni, Takeoff Minimums & Obstacle DP, Orig Dwight, IL, Dwight, Takeoff Minimums..., Florence Rgnl, RNAV (GPS) RWY 9, Orig-A Spearfish, SD, Black Hills-Clydes Ice Field, RNAV (GPS) RWY 13...

77 FR 39623 - Airworthiness Standards: Aircraft Engines; Technical Amendment

Federal Register 2010, 2011, 2012, 2013, 2014

2012-07-05

...] Airworthiness Standards: Aircraft Engines; Technical Amendment AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Final rule; technical amendment. SUMMARY: This amendment clarifies aircraft engine... from applicants requesting FAA engine type certifications and aftermarket certifications, such as...

Standardization of reliability reporting for cochlear implants: an interim report.

PubMed

Backous, Douglas D; Watson, Stacey D

2007-04-01

To propose a standard definition of "out of specification" for cochlear implants and a paradigm for inclusion of category C of the ISO standard 5841-2:2000 for reporting in cumulative survival statistics. A standard definition of "out of specification" and consistent reporting by manufacturers of cochlear implants will create a fair and consistent representation of cumulative survival. This will allow discernment of differences between manufacturers for reliability and for detection of trends in reliability between model types from the same manufacturer. Three separate meetings with representatives of the three manufacturers of cochlear implants marketed in the United States were staged over a 13-mo period. Standard questions, created by the authors, were addressed by each representative to determine the current state of device reliability reporting. Results were presented to clinicians at the William House Cochlear Implant study Group and the Implantable devices sub-committee of the American Academy of Otolaryngology (2004, 2005) and at the 8th International Cochlear Implant Conference (2004) for feedback. After assimilation of feedback by all parties, the standard was written and reviewed by representatives from each manufacturer for accuracy of data. A complaint-driven standard was developed. A "cochlear implant" as an internal device placed and skin closed in surgery. An internal device is "out of specification" when one or more technical characteristics is outside the limits of normal function and results in explantation or non-use by the patient." Children will be reported separately from adults, each model of device will be reported on annually, a minimum of 200 devices must be in each model group for Cumulative Survival Reporting (CSR). Confidence limits are set at 95%. Explants will be determined to be "biological" or "technical." Technical explants are included in CSR reports. Devices failing to meet specifications set by the manufacturer, not in use but still in situ due to patient choice not to be re-implanted are considered category C and included in CSR reports. Implants that cannot be classified at explant are placed in an "under investigation" category while evaluation is completed. If no classification is made by 6 months, these devices will be included in the CSR report. Notification to the implant center regarding "in" or "out of specification" will be made within 60 d of the explant arriving at the manufacturer with final root cause of failure reported to centers when complete. Information will be passed on to patients by members of the implant team. A standardized form will be created to provide the manufacturers with necessary patient information to guide reliability analysis, including performance after re-implant. The standard for reliability reporting described in this paper improves patient care by presenting data which are understandable to clinicians delivering cochlear implant services. It fosters fair and accurate reporting without discriminating or granting perceived advantage to any manufacturer. This standard provides a basis for reporting research related to or including device reliability in the medical literature.

12 CFR 3.10 - Minimum capital requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Minimum capital requirements. 3.10 Section 3.10 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY CAPITAL ADEQUACY STANDARDS Capital Ratio Requirements and Buffers § 3.10 Minimum capital requirements. (a) Minimum capital...

Academy of Nutrition and Dietetics: Revised 2017 Scope of Practice for the Nutrition and Dietetics Technician, Registered.

PubMed

2018-02-01

The Academy of Nutrition and Dietetics (Academy) is the world's largest organization of food and nutrition professionals and the association that represents credentialed nutrition and dietetics practitioners-nutrition and dietetics technicians, registered (NDTRs) and registered dietitian nutritionists (RDNs). An NDTR's scope of practice in nutrition and dietetics has flexible boundaries to capture the depth and breadth of the individual's practice. The NDTR's practice expands with advances in many areas, including nutrition, food production, food safety, food systems management, health care, public health, community health, and information and communication technology. The Revised 2017 Scope of Practice for the NDTR reflects the position of the Academy on the essential role of the NDTR in the management and delivery of food and nutrition services. The scope of practice for the NDTR is composed of education and credentialing, practice resources, Academy Standards of Practice and Standards of Professional Performance, codes of ethics, accreditation standards, state and federal regulations, national guidelines, and organizational policy and procedures. The Revised 2017 Scope of Practice for the NDTR is used in conjunction with the Revised 2017 Standards of Practice in Nutrition Care and the Standards of Professional Performance for NDTRs. The Standards of Practice address activities related to direct patient and client care. The Standards of Professional Performance address behaviors related to the technical role of NDTRs. These standards reflect the minimum competent level of nutrition and dietetics practice and professional performance for NDTRs. A companion document addresses the scope of practice for the RDN. Copyright © 2018 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

19 CFR 151.13 - Approval of commercial gaugers.

Code of Federal Regulations, 2010 CFR

2010-04-01

... gauger). In general, each technical staff member should have, at a minimum, six months training and..., manufacturer, and country-of-origin. (ii) Major equipment records. Records for each major piece of equipment...

Building Energy Simulation Test for Existing Homes (BESTEST-EX) (Presentation)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Judkoff, R.; Neymark, J.; Polly, B.

2011-12-01

This presentation discusses the goals of NREL Analysis Accuracy R&D; BESTEST-EX goals; what BESTEST-EX is; how it works; 'Building Physics' cases; 'Building Physics' reference results; 'utility bill calibration' cases; limitations and potential future work. Goals of NREL Analysis Accuracy R&D are: (1) Provide industry with the tools and technical information needed to improve the accuracy and consistency of analysis methods; (2) Reduce the risks associated with purchasing, financing, and selling energy efficiency upgrades; and (3) Enhance software and input collection methods considering impacts on accuracy, cost, and time of energy assessments. BESTEST-EX Goals are: (1) Test software predictions of retrofitmore » energy savings in existing homes; (2) Ensure building physics calculations and utility bill calibration procedures perform up to a minimum standard; and (3) Quantify impact of uncertainties in input audit data and occupant behavior. BESTEST-EX is a repeatable procedure that tests how well audit software predictions compare to the current state of the art in building energy simulation. There is no direct truth standard. However, reference software have been subjected to validation testing, including comparisons with empirical data.« less

Performance of bulk oil circuit breaker (BOCB) influenced by its parameters (Case study at the substation of Bogor Baru)

NASA Astrophysics Data System (ADS)

Goeritno, Arief; Rasiman, Syofyan

2017-06-01

Performance examination of the bulk oil circuit breaker that is influenced by its parameters at the Substation of Bogor Baru (the State Electricity Company = PLN) has been done. It is found that (1) dielectric strength of oil still qualifies as an insulating and cooling medium, because the average value of the measurement result is still above the minimum value allowed, where the minimum limit of 80 kV/2.5 cm or 32 kV/cm; (2) the simultaneity of the CB's contacts is still eligible, so that the BOCB can still be operated, because the difference of time between the highest and lowest values when the BOCB's contacts are opened/closed are less than (Δt<) 10 milliseconds (if meeting the PLN standards as recommended by Alsthom); and (3) the parameter of resistance according to the standards, where (i) the resistance of insulation has a value far above the allowed threshold, while the minimum standards are above 2,000 Mn (if meeting the ANSI standards) or on the value of 2,000 MΩ (if meeting PLN standards), (ii) the resistance of contacts has a value far above the allowed threshold, while the minimum standards are below 350 µΩ (if meeting ANSI standards) or on the value of 200 µΩ (if meeting PLN standards). The resistance of grounding is equal to the maximum limit specified, while the maximum standard is on the value of 0.5 Ω (if meeting PLN standard).

Proposed English Standards Promote Aviation Safety.

ERIC Educational Resources Information Center

Chatham, Robert L.; Thomas, Shelley

2000-01-01

Discusses the International Civil Aviation Organization's (ICAO) Air Navigation's Commission approval of a task to develop minimum skill level requirements in English for air traffic control. The ICAO collaborated with the Defense Language Institute English Language Center to propose a minimum standard for English proficiency for international…

25 CFR 63.12 - What are minimum standards of character?

Code of Federal Regulations, 2013 CFR

2013-04-01

... guilty to any offense under Federal, state, or tribal law involving crimes of violence, sexual assault, sexual molestation, sexual exploitation, sexual contact or prostitution, or crimes against persons. ... PROTECTION AND FAMILY VIOLENCE PREVENTION Minimum Standards of Character and Suitability for Employment § 63...

25 CFR 63.12 - What are minimum standards of character?

Code of Federal Regulations, 2014 CFR

2014-04-01

... guilty to any offense under Federal, state, or tribal law involving crimes of violence, sexual assault, sexual molestation, sexual exploitation, sexual contact or prostitution, or crimes against persons. ... PROTECTION AND FAMILY VIOLENCE PREVENTION Minimum Standards of Character and Suitability for Employment § 63...

25 CFR 63.12 - What are minimum standards of character?

Code of Federal Regulations, 2011 CFR

2011-04-01

... guilty to any offense under Federal, state, or tribal law involving crimes of violence, sexual assault, sexual molestation, sexual exploitation, sexual contact or prostitution, or crimes against persons. ... PROTECTION AND FAMILY VIOLENCE PREVENTION Minimum Standards of Character and Suitability for Employment § 63...

25 CFR 63.12 - What are minimum standards of character?

Code of Federal Regulations, 2012 CFR

2012-04-01

... guilty to any offense under Federal, state, or tribal law involving crimes of violence, sexual assault, sexual molestation, sexual exploitation, sexual contact or prostitution, or crimes against persons. ... PROTECTION AND FAMILY VIOLENCE PREVENTION Minimum Standards of Character and Suitability for Employment § 63...

Crew Transportation Technical Standards and Design Evaluation Criteria

NASA Technical Reports Server (NTRS)

Lueders, Kathryn L.; Thomas, Rayelle E. (Compiler)

2015-01-01

Crew Transportation Technical Standards and Design Evaluation Criteria contains descriptions of technical, safety, and crew health medical processes and specifications, and the criteria which will be used to evaluate the acceptability of the Commercial Providers' proposed processes and specifications.

Current Status of Multidisciplinary Care in Psoriatic Arthritis in Spain: NEXUS 2.0 Project.

PubMed

Queiro, Rubén; Coto, Pablo; Joven, Beatriz; Rivera, Raquel; Navío Marco, Teresa; de la Cueva, Pablo; Alvarez Vega, Jose Luis; Narváez Moreno, Basilio; Rodriguez Martínez, Fernando José; Pardo Sánchez, José; Feced Olmos, Carlos; Pujol, Conrad; Rodríguez, Jesús; Notario, Jaume; Pujol Busquets, Manel; García Font, Mercè; Galindez, Eva; Pérez Barrio, Silvia; Urruticoechea-Arana, Ana; Hergueta, Merce; López Montilla, M Dolores; Vélez García-Nieto, Antonio; Maceiras, Francisco; Rodríguez Pazos, Laura; Rubio Romero, Esteban; Rodríguez Fernandez Freire, Lourdes; Luelmo, Jesús; Gratacós, Jordi

2018-02-26

1) To analyze the implementation of multidisciplinary care models in psoriatic arthritis (PsA) patients, 2) To define minimum and excellent standards of care. A survey was sent to clinicians who already performed multidisciplinary care or were in the process of undertaking it, asking: 1) Type of multidisciplinary care model implemented; 2) Degree, priority and feasibility of the implementation of quality standards in the structure, process and result for care. In 6 regional meetings the results of the survey were presented and discussed, and the ultimate priority of quality standards for care was defined. At a nominal meeting group, 11 experts (rheumatologists and dermatologists) analyzed the results of the survey and the regional meetings. With this information, they defined which standards of care are currently considered as minimum and which are excellent. The simultaneous and parallel models of multidisciplinary care are those most widely implemented, but the implementation of quality standards is highly variable. In terms of structure it ranges from 22% to 74%, in those related to process from 17% to 54% and in the results from 2% to 28%. Of the 25 original quality standards for care, 9 were considered only minimum, 4 were excellent and 12 defined criteria for minimum level and others for excellence. The definition of minimum and excellent quality standards for care will help achieve the goal of multidisciplinary care for patients with PAs, which is the best healthcare possible. Copyright © 2018 Elsevier España, S.L.U. and Sociedad Española de Reumatología y Colegio Mexicano de Reumatología. All rights reserved.

Improving automation standards via semantic modelling: Application to ISA88.

PubMed

Dombayci, Canan; Farreres, Javier; Rodríguez, Horacio; Espuña, Antonio; Graells, Moisès

2017-03-01

Standardization is essential for automation. Extensibility, scalability, and reusability are important features for automation software that rely in the efficient modelling of the addressed systems. The work presented here is from the ongoing development of a methodology for semi-automatic ontology construction methodology from technical documents. The main aim of this work is to systematically check the consistency of technical documents and support the improvement of technical document consistency. The formalization of conceptual models and the subsequent writing of technical standards are simultaneously analyzed, and guidelines proposed for application to future technical standards. Three paradigms are discussed for the development of domain ontologies from technical documents, starting from the current state of the art, continuing with the intermediate method presented and used in this paper, and ending with the suggested paradigm for the future. The ISA88 Standard is taken as a representative case study. Linguistic techniques from the semi-automatic ontology construction methodology is applied to the ISA88 Standard and different modelling and standardization aspects that are worth sharing with the automation community is addressed. This study discusses different paradigms for developing and sharing conceptual models for the subsequent development of automation software, along with presenting the systematic consistency checking method. Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

Optimization of aircraft seat cushion fire blocking layers

NASA Technical Reports Server (NTRS)

Kourtides, D. A.; Parker, J. A.; Ling, A. C.; Hovatter, W. R.

1983-01-01

This report describes work completed by the National Aeronautics and Space Administration - for the Federal Aviation Administration Technical Center. The purpose of this work was to examine the potential of fire blocking mechanisms for aircraft seat cushions in order to provide an optimized seat configuration with adequate fire protection and minimum weight. Aluminized thermally stable fabrics were found to provide adequate fire protection when used in conjunction with urethane foams, while maintaining minimum weight and cost penalty.

76 FR 38431 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-30

... Commission's minimum performance standards regarding registered transfer agents, and (2) to assure that issuers are aware of certain problems and poor performances with respect to the transfer agents that are... failure to comply with the Commission's minimum performance standards then the issuer will be unable to...

25 CFR 36.22 - Standard VII-Elementary instructional program.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Mathematics. (3) Social studies. (4) Sciences. (5) Fine arts. (6) Physical education. (b) Each school shall... Section 36.22 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum...

25 CFR 36.20 - Standard V-Minimum academic programs/school calendar.

Code of Federal Regulations, 2010 CFR

2010-04-01

..., physical education, music, etc.) which are directly related to or affect student instruction shall provide....20 Section 36.20 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...

Setting Standards for Minimum Competency Tests.

ERIC Educational Resources Information Center

Mehrens, William A.

Some general questions about minimum competency tests are discussed, and various methods of setting standards are reviewed with major attention devoted to those methods used for dichotomizing a continuum. Methods reviewed under the heading of Absolute Judgments of Test Content include Nedelsky's, Angoff's, Ebel's, and Jaeger's. These methods are…

25 CFR 36.21 - Standard VI-Kindergarten instructional program.

Code of Federal Regulations, 2010 CFR

2010-04-01

... and creative tendencies. (5) Health education inclusive of the requirements contained in the Act of... Section 36.21 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum...

25 CFR 36.21 - Standard VI-Kindergarten instructional program.

Code of Federal Regulations, 2011 CFR

2011-04-01

... and creative tendencies. (5) Health education inclusive of the requirements contained in the Act of... Section 36.21 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum...

5 CFR 890.201 - Minimum standards for health benefits plans.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 2 2013-01-01 2013-01-01 false Minimum standards for health benefits plans. 890.201 Section 890.201 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Health Benefits Plans § 890.201...

5 CFR 890.202 - Minimum standards for health benefits carriers.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 5 Administrative Personnel 2 2013-01-01 2013-01-01 false Minimum standards for health benefits carriers. 890.202 Section 890.202 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Health Benefits Plans § 890.202...

5 CFR 890.201 - Minimum standards for health benefits plans.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 2 2014-01-01 2014-01-01 false Minimum standards for health benefits plans. 890.201 Section 890.201 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Health Benefits Plans § 890.201...

5 CFR 890.202 - Minimum standards for health benefits carriers.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 5 Administrative Personnel 2 2014-01-01 2014-01-01 false Minimum standards for health benefits carriers. 890.202 Section 890.202 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Health Benefits Plans § 890.202...

5 CFR 890.202 - Minimum standards for health benefits carriers.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 5 Administrative Personnel 2 2010-01-01 2010-01-01 false Minimum standards for health benefits carriers. 890.202 Section 890.202 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT (CONTINUED) CIVIL SERVICE REGULATIONS (CONTINUED) FEDERAL EMPLOYEES HEALTH BENEFITS PROGRAM Health Benefits Plans § 890.202...

25 CFR 36.22 - Standard VII-Elementary instructional program.

Code of Federal Regulations, 2011 CFR

2011-04-01

...) Mathematics. (3) Social studies. (4) Sciences. (5) Fine arts. (6) Physical education. (b) Each school shall... Section 36.22 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY SITUATIONS Minimum...

Research to Advance the Development of River Information Services (RIS) Technologies

DTIC Science & Technology

2016-12-01

RIS implementation in Europe. Both the legal as well as the technical framework are been presented and analyzed. Special attention has been given to...and legal environments on both continents and take into account the organ- izational situation in the U.S. and the existing capabilities. Research...rective” Europe has set the legal and technical framework which guarantees harmonized implementation of RIS in all member states as well as a minimum

Minimum information about a single amplified genome (MISAG) and a metagenome-assembled genome (MIMAG) of bacteria and archaea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bowers, Robert M.; Kyrpides, Nikos C.; Stepanauskas, Ramunas

The number of genomes from uncultivated microbes will soon surpass the number of isolate genomes in public databases (Hugenholtz, Skarshewski, & Parks, 2016). Technological advancements in high-throughput sequencing and assembly, including single-cell genomics and the computational extraction of genomes from metagenomes (GFMs), are largely responsible. Here we propose community standards for reporting the Minimum Information about a Single-Cell Genome (MIxS-SCG) and Minimum Information about Genomes extracted From Metagenomes (MIxS-GFM) specific for Bacteria and Archaea. The standards have been developed in the context of the International Genomics Standards Consortium (GSC) community (Field et al., 2014) and can be viewed as amore » supplement to other GSC checklists including the Minimum Information about a Genome Sequence (MIGS), Minimum information about a Metagenomic Sequence(s) (MIMS) (Field et al., 2008) and Minimum Information about a Marker Gene Sequence (MIMARKS) (P. Yilmaz et al., 2011). Community-wide acceptance of MIxS-SCG and MIxS-GFM for Bacteria and Archaea will enable broad comparative analyses of genomes from the majority of taxa that remain uncultivated, improving our understanding of microbial function, ecology, and evolution.« less

47 CFR 95.637 - Modulation standards.

Code of Federal Regulations, 2010 CFR

2010-10-01

... amplitude modulation and frequency or phase modulation of a transmitter are not permitted. (d) When emission... 47 Telecommunication 5 2010-10-01 2010-10-01 false Modulation standards. 95.637 Section 95.637... SERVICES Technical Regulations Technical Standards § 95.637 Modulation standards. (a) A GMRS transmitter...

25 CFR 10.7 - Where do I find help or receive technical assistance in complying with the policies and standards?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Where do I find help or receive technical assistance in complying with the policies and standards? 10.7 Section 10.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF... help or receive technical assistance in complying with the policies and standards? The BIA has a...

25 CFR 10.7 - Where do I find help or receive technical assistance in complying with the policies and standards?

Code of Federal Regulations, 2011 CFR

2011-04-01

... 25 Indians 1 2011-04-01 2011-04-01 false Where do I find help or receive technical assistance in complying with the policies and standards? 10.7 Section 10.7 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF... help or receive technical assistance in complying with the policies and standards? The BIA has a...

Public and Private Hospital Services Reform Using Data Envelopment Analysis to Measure Technical, Scale, Allocative, and Cost Efficiencies

PubMed Central

Sheikhzadeh, Yaghoub; Roudsari, Abdul V.; Vahidi, Reza Gholi; Emrouznejad, Ali; Dastgiri, Saeed

2012-01-01

Background: The aim of this study was to suggest a suitable context to develop efficient hospital systems while maintaining the quality of care at minimum expenditures. Methods: This research aimed to present a model of efficiency for selected public and private hospitals of East Azerbaijani Province of Iran by making use of Data Envelopment Analysis approach in order to recognize and suggest the best practice standards. Results: Among the six inefficient hospitals, 2 (33%) had a technical efficiency score of less than 50% (both private), 2 (33%) between 51 and 74% (one private and one public) and the rest (2, 33%) between 75 and 99% (one private and one public). Conclusion: In general, the public hospitals are relatively more efficient than private ones; it is recommended for inefficient hospitals to make use of the followings: transferring, selling, or renting idle/unused beds; transferring excess doctors and nurses to the efficient hospitals or other health centers; pensioning off, early retirement clinic officers, technicians/technologists, and other technical staff. The saving obtained from the above approaches could be used to improve remuneration for remaining staff and quality of health care services of hospitals, rural and urban health centers, support communities to start or sustain systematic risk and resource pooling and cost sharing mechanisms for protecting beneficiaries against unexpected health care costs, compensate the capital depreciation, increasing investments, and improve diseases prevention services and facilities in the provincial level. PMID:24688915

Public and private hospital services reform using data envelopment analysis to measure technical, scale, allocative, and cost efficiencies.

PubMed

Sheikhzadeh, Yaghoub; Roudsari, Abdul V; Vahidi, Reza Gholi; Emrouznejad, Ali; Dastgiri, Saeed

2012-01-01

The aim of this study was to suggest a suitable context to develop efficient hospital systems while maintaining the quality of care at minimum expenditures. This research aimed to present a model of efficiency for selected public and private hospitals of East Azerbaijani Province of Iran by making use of Data Envelopment Analysis approach in order to recognize and suggest the best practice standards. Among the six inefficient hospitals, 2 (33%) had a technical efficiency score of less than 50% (both private), 2 (33%) between 51 and 74% (one private and one public) and the rest (2, 33%) between 75 and 99% (one private and one public). In general, the public hospitals are relatively more efficient than private ones; it is recommended for inefficient hospitals to make use of the followings: transferring, selling, or renting idle/unused beds; transferring excess doctors and nurses to the efficient hospitals or other health centers; pensioning off, early retirement clinic officers, technicians/technologists, and other technical staff. The saving obtained from the above approaches could be used to improve remuneration for remaining staff and quality of health care services of hospitals, rural and urban health centers, support communities to start or sustain systematic risk and resource pooling and cost sharing mechanisms for protecting beneficiaries against unexpected health care costs, compensate the capital depreciation, increasing investments, and improve diseases prevention services and facilities in the provincial level.

Vocational and Technical Education Performance Standards and Competencies.

ERIC Educational Resources Information Center

Connecticut State Board of Education, Hartford.

These Connecticut vocational and technical performance standards and competencies are a guide for overall quality attainment in these seven vocational and technical program areas: agricultural science technology education; business and finance technology education; cooperative work education; family and consumer sciences education; marketing…

Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project: Detect and Avoid Display Evaluations in Support of SC-228 Minimum Operational Performance Standards Development

NASA Technical Reports Server (NTRS)

Fern, Lisa Carolynn

2017-01-01

The primary activity for the UAS-NAS Human Systems Integration (HSI) sub-project in Phase 1 was support of RTCA Special Committee 228 Minimum Operational Performance Standards (MOPS). We provide data on the effect of various Detect and Avoid (DAA) display features with respect to pilot performance of the remain well clear function in order to determine the minimum requirements for DAA displays.

75 FR 55269 - Minimum Internal Control Standards for Class II Gaming

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-10

... DEPARTMENT OF THE INTERIOR National Indian Gaming Commission 25 CFR Parts 542 and 543 RIN 3141-AA-37 Minimum Internal Control Standards for Class II Gaming AGENCY: National Indian Gaming Commission. ACTION: Delay of effective date of final rule; request for comments. SUMMARY: The National Indian Gaming...

47 CFR 64.706 - Minimum standards for the routing and handling of emergency telephone calls.

Code of Federal Regulations, 2010 CFR

2010-10-01

... of emergency telephone calls. 64.706 Section 64.706 Telecommunication FEDERAL COMMUNICATIONS... Operator Services § 64.706 Minimum standards for the routing and handling of emergency telephone calls. Upon receipt of any emergency telephone call, providers of operator services and aggregators shall...

25 CFR 36.1 - Purpose, scope, and information collection requirements.

Code of Federal Regulations, 2010 CFR

2010-04-01

.... 36.1 Section 36.1 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY... of this rule is to establish minimum academic standards for the basic education of Indian children...

Citizenship, Multicultural, and Human Relations Education. Minimum Standards Leadership Series, 1985.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Elementary and Secondary Education.

Minimum standards for elementary and secondary schools require that courses of study provide for the following topics: citizenship, human relations education, and multicultural education. It is educationally profitable to view these as three interdependent perspectives which shape a citizen's participation in democratic life. Cultivating these…

38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

Code of Federal Regulations, 2012 CFR

2012-07-01

... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

Code of Federal Regulations, 2014 CFR

2014-07-01

... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

Code of Federal Regulations, 2011 CFR

2011-07-01

... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

38 CFR 17.155 - Minimum standards of safety and quality for automotive adaptive equipment.

Code of Federal Regulations, 2013 CFR

2013-07-01

... safety and quality for automotive adaptive equipment. 17.155 Section 17.155 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS AFFAIRS MEDICAL Automotive Equipment and Driver Training § 17.155 Minimum standards of safety and quality for automotive adaptive equipment. (a) The Under Secretary for...

12 CFR 615.5205 - Minimum permanent capital standards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Minimum permanent capital standards. 615.5205 Section 615.5205 Banks and Banking FARM CREDIT ADMINISTRATION FARM CREDIT SYSTEM FUNDING AND FISCAL... least 7 percent of its risk-adjusted asset base. [62 FR 4446, Jan. 30, 1997] ...

Establishing Proficiency Standards for High School Graduation.

ERIC Educational Resources Information Center

Herron, Marshall D.

The Oregon State Board of Education has rejected the use of cut-off scores on a proficiency test to establish minimum performance standards for high school graduation. Instead, each school district is required to specify--by local board adoption--minimum competencies in reading, writing, listening, speaking, analyzing, and computing. These…

General Requirements and Minimum Standards.

ERIC Educational Resources Information Center

2003

This publication provides the General Requirements and Minimum Standards developed by the National Court Reporters Association's Council on Approved Student Education (CASE). They are the same for all court reporter education programs, whether an institution is applying for approval for the first time or for a new grant of approval. The first…

25 CFR 36.31 - Standard XI-Student promotion requirements.

Code of Federal Regulations, 2014 CFR

2014-04-01

... 25 Indians 1 2014-04-01 2014-04-01 false Standard XI-Student promotion requirements. 36.31 Section 36.31 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC... programs, in a minimum of 160 instructional days per academic term or 80 instructional days per semester...

25 CFR 36.31 - Standard XI-Student promotion requirements.

Code of Federal Regulations, 2013 CFR

2013-04-01

... 25 Indians 1 2013-04-01 2013-04-01 false Standard XI-Student promotion requirements. 36.31 Section 36.31 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC... programs, in a minimum of 160 instructional days per academic term or 80 instructional days per semester...

Dependability of technical items: Problems of standardization

NASA Astrophysics Data System (ADS)

Fedotova, G. A.; Voropai, N. I.; Kovalev, G. F.

2016-12-01

This paper is concerned with problems blown up in the development of a new version of the Interstate Standard GOST 27.002 "Industrial product dependability. Terms and definitions". This Standard covers a wide range of technical items and is used in numerous regulations, specifications, standard and technical documentation. A currently available State Standard GOST 27.002-89 was introduced in 1990. Its development involved a participation of scientists and experts from different technical areas, its draft was debated in different audiences and constantly refined, so it was a high quality document. However, after 25 years of its application it's become necessary to develop a new version of the Standard that would reflect the current understanding of industrial dependability, accounting for the changes taking place in Russia in the production, management and development of various technical systems and facilities. The development of a new version of the Standard makes it possible to generalize on a terminological level the knowledge and experience in the area of reliability of technical items, accumulated over a quarter of the century in different industries and reliability research schools, to account for domestic and foreign experience of standardization. Working on the new version of the Standard, we have faced a number of issues and problems on harmonization with the International Standard IEC 60500-192, caused first of all by different approaches to the use of terms and differences in the mentalities of experts from different countries. The paper focuses on the problems related to the chapter "Maintenance, restoration and repair", which caused difficulties for the developers to harmonize term definitions both with experts and the International Standard, which is mainly related to differences between the Russian concept and practice of maintenance and repair and foreign ones.

29 CFR 4.159 - General minimum wage.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 29 Labor 1 2010-07-01 2010-07-01 true General minimum wage. 4.159 Section 4.159 Labor Office of... General minimum wage. The Act, in section 2(b)(1), provides generally that no contractor or subcontractor... a contract less than the minimum wage specified under section 6(a)(1) of the Fair Labor Standards...

76 FR 29333 - Pipeline Safety: Meetings of the Technical Pipeline Safety Standards Committee and the Technical...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-20

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket No... Technical Hazardous Liquid Pipeline Safety Standards Committee AGENCY: Pipeline and Hazardous Materials... for natural gas pipelines and for hazardous liquid pipelines. Both committees were established under...

Minimum information about a marker gene sequence (MIMARKS) and minimum information about any (x) sequence (MIxS) specifications

PubMed Central

Yilmaz, Pelin; Kottmann, Renzo; Field, Dawn; Knight, Rob; Cole, James R; Amaral-Zettler, Linda; Gilbert, Jack A; Karsch-Mizrachi, Ilene; Johnston, Anjanette; Cochrane, Guy; Vaughan, Robert; Hunter, Christopher; Park, Joonhong; Morrison, Norman; Rocca-Serra, Philippe; Sterk, Peter; Arumugam, Manimozhiyan; Bailey, Mark; Baumgartner, Laura; Birren, Bruce W; Blaser, Martin J; Bonazzi, Vivien; Booth, Tim; Bork, Peer; Bushman, Frederic D; Buttigieg, Pier Luigi; Chain, Patrick S G; Charlson, Emily; Costello, Elizabeth K; Huot-Creasy, Heather; Dawyndt, Peter; DeSantis, Todd; Fierer, Noah; Fuhrman, Jed A; Gallery, Rachel E; Gevers, Dirk; Gibbs, Richard A; Gil, Inigo San; Gonzalez, Antonio; Gordon, Jeffrey I; Guralnick, Robert; Hankeln, Wolfgang; Highlander, Sarah; Hugenholtz, Philip; Jansson, Janet; Kau, Andrew L; Kelley, Scott T; Kennedy, Jerry; Knights, Dan; Koren, Omry; Kuczynski, Justin; Kyrpides, Nikos; Larsen, Robert; Lauber, Christian L; Legg, Teresa; Ley, Ruth E; Lozupone, Catherine A; Ludwig, Wolfgang; Lyons, Donna; Maguire, Eamonn; Methé, Barbara A; Meyer, Folker; Muegge, Brian; Nakielny, Sara; Nelson, Karen E; Nemergut, Diana; Neufeld, Josh D; Newbold, Lindsay K; Oliver, Anna E; Pace, Norman R; Palanisamy, Giriprakash; Peplies, Jörg; Petrosino, Joseph; Proctor, Lita; Pruesse, Elmar; Quast, Christian; Raes, Jeroen; Ratnasingham, Sujeevan; Ravel, Jacques; Relman, David A; Assunta-Sansone, Susanna; Schloss, Patrick D; Schriml, Lynn; Sinha, Rohini; Smith, Michelle I; Sodergren, Erica; Spor, Aymé; Stombaugh, Jesse; Tiedje, James M; Ward, Doyle V; Weinstock, George M; Wendel, Doug; White, Owen; Whiteley, Andrew; Wilke, Andreas; Wortman, Jennifer R; Yatsunenko, Tanya; Glöckner, Frank Oliver

2012-01-01

Here we present a standard developed by the Genomic Standards Consortium (GSC) for reporting marker gene sequences—the minimum information about a marker gene sequence (MIMARKS). We also introduce a system for describing the environment from which a biological sample originates. The ‘environmental packages’ apply to any genome sequence of known origin and can be used in combination with MIMARKS and other GSC checklists. Finally, to establish a unified standard for describing sequence data and to provide a single point of entry for the scientific community to access and learn about GSC checklists, we present the minimum information about any (x) sequence (MIxS). Adoption of MIxS will enhance our ability to analyze natural genetic diversity documented by massive DNA sequencing efforts from myriad ecosystems in our ever-changing biosphere. PMID:21552244

A data envelope analysis to assess factors affecting technical and economic efficiency of individual broiler breeder hens.

PubMed

Romero, L F; Zuidhof, M J; Jeffrey, S R; Naeima, A; Renema, R A; Robinson, F E

2010-08-01

This study evaluated the effect of feed allocation and energetic efficiency on technical and economic efficiency of broiler breeder hens using the data envelope analysis methodology and quantified the effect of variables affecting technical efficiency. A total of 288 Ross 708 pullets were placed in individual cages at 16 wk of age and assigned to 1 of 4 feed allocation groups. Three of them had feed allocated on a group basis with divergent BW targets: standard, high (standard x 1.1), and low (standard x 0.9). The fourth group had feed allocated on an individual bird basis following the standard BW target. Birds were classified in 3 energetic efficiency categories: low, average, and high, based on estimated maintenance requirements. Technical efficiency considered saleable chicks as output and cumulative ME intake and time as inputs. Economic efficiency of feed allocation treatments was analyzed under different cost scenarios. Birds with low feed allocation exhibited a lower technical efficiency (69.4%) than standard (72.1%), which reflected a reduced egg production rate. Feed allocation of the high treatment could have been reduced by 10% with the same chick production as the standard treatment. The low treatment exhibited reduced economic efficiency at greater capital costs, whereas high had reduced economic efficiency at greater feed costs. The average energetic efficiency hens had a lower technical efficiency in the low compared with the standard feed allocation. A 1% increment in estimated maintenance requirement changed technical efficiency by -0.23%, whereas a 1% increment in ME intake had a -0.47% effect. The negative relationship between technical efficiency and ME intake was counterbalanced by a positive correlation of ME intake and egg production. The negative relationship of technical efficiency and maintenance requirements was synergized by a negative correlation of hen maintenance and egg production. Economic efficiency methodologies are effective tools to assess the economic effect of selection and flock management programs because biological, allocative, and economic factors can be independently analyzed.

Technical Support Document for Version 3.4.0 of the COMcheck Software

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bartlett, Rosemarie; Connell, Linda M.; Gowri, Krishnan

2007-09-14

COMcheck provides an optional way to demonstrate compliance with commercial and high-rise residential building energy codes. Commercial buildings include all use groups except single family and multifamily not over three stories in height. COMcheck was originally based on ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989) requirements and is intended for use with various codes based on Standard 90.1, including the Codification of ASHRAE/IES Standard 90.1-1989 (90.1-1989 Code) (ASHRAE 1989a, 1993b) and ASHRAE/IESNA Standard 90.1-1999 (Standard 90.1-1999). This includes jurisdictions that have adopted the 90.1-1989 Code, Standard 90.1-1989, Standard 90.1-1999, or their own code based on one of these. We view Standard 90.1-1989more » and the 90.1-1989 Code as having equivalent technical content and have used both as source documents in developing COMcheck. This technical support document (TSD) is designed to explain the technical basis for the COMcheck software as originally developed based on the ANSI/ASHRAE/IES Standard 90.1-1989 (Standard 90.1-1989). Documentation for other national model codes and standards and specific state energy codes supported in COMcheck has been added to this report as appendices. These appendices are intended to provide technical documentation for features specific to the supported codes and for any changes made for state-specific codes that differ from the standard features that support compliance with the national model codes and standards.« less

EPA STANDARDS NETWORK FACT SHEET: ISO 14000: INTERNATIONAL ENVIRONMENTAL MANAGEMENT STANDARDS

EPA Science Inventory

This flyer provides an overview of the ISO 14000 series of International standards, supplying a brief history, structure of the Technical Committee (TC) 207, structure of the U.S. Technical Advisory Group (TAG) to ISO TC-207, status of the Standards development as of June 1997, w...

A proof of the theorem regarding the distribution of lift over the span for minimum induced drag

NASA Technical Reports Server (NTRS)

Durand, W F

1931-01-01

The proof of the theorem that the elliptical distribution of lift over the span is that which will give rise to the minimum induced drag has been given in a variety of ways, generally speaking too difficult to be readily followed by the graduate of the average good technical school of the present day. In the form of proof this report makes an effort to bring the matter more readily within the grasp of this class of readers.

75 FR 36273 - Navigation and Navigable Waters; Technical, Organizational, and Conforming Amendments

Federal Register 2010, 2011, 2012, 2013, 2014

2010-06-25

..., Gross 4,000 Negligence (per barrel of oil or unit discharged) Judicial Assessment. 33 U.S.C. 1321(b)(7)(D) Oil/Hazardous Substances: Discharges, Gross 130,000 Negligence-Minimum Penalty (Judicial...

Dish Stirling solar receiver program

NASA Technical Reports Server (NTRS)

Haglund, R. A.

1980-01-01

A technology demonstration of a Dish Stirling solar thermal electric system can be accomplished earlier and at a much lower cost than previous planning had indicated by employing technical solutions that allow already existing hardware, with minimum modifications, to be integrated into a total system with a minimum of development. The DSSR operates with a modified United Stirling p-40 engine/alternator and the JPL Test Bed Concentrator as a completely integrated solar thermal electric system having a design output of 25 kWe. The system is augmented by fossil fuel combustion which ensures a continuous electrical output under all environmental conditions. Technical and economic studies by government and industry in the United States and abroad identify the Dish Stirling solar electric system as the most appropriate, efficient and economical method for conversion of solar energy to electricity in applications when the electrical demand is 10 MWe and less.

77 FR 27814 - Model Safety Evaluation for Plant-Specific Adoption of Technical Specifications Task Force...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-05-11

... NUCLEAR REGULATORY COMMISSION [Project No. 753; NRC-2012-0019] Model Safety Evaluation for Plant... Regulatory Commission (NRC) is announcing the availability of the model safety evaluation (SE) for plant... the Improved Standard Technical Specification (ISTS), NUREG-1431, ``Standard Technical Specifications...

Standardized assessment of infrared thermographic fever screening system performance

NASA Astrophysics Data System (ADS)

Ghassemi, Pejhman; Pfefer, Joshua; Casamento, Jon; Wang, Quanzeng

2017-03-01

Thermal modalities represent the only currently viable mass fever screening approach for outbreaks of infectious disease pandemics such as Ebola and SARS. Non-contact infrared thermometers (NCITs) and infrared thermographs (IRTs) have been previously used for mass fever screening in transportation hubs such as airports to reduce the spread of disease. While NCITs remain a more popular choice for fever screening in the field and at fixed locations, there has been increasing evidence in the literature that IRTs can provide greater accuracy in estimating core body temperature if appropriate measurement practices are applied - including the use of technically suitable thermographs. Therefore, the purpose of this study was to develop a battery of evaluation test methods for standardized, objective and quantitative assessment of thermograph performance characteristics critical to assessing suitability for clinical use. These factors include stability, drift, uniformity, minimum resolvable temperature difference, and accuracy. Two commercial IRT models were characterized. An external temperature reference source with high temperature accuracy was utilized as part of the screening thermograph. Results showed that both IRTs are relatively accurate and stable (<1% error of reading with stability of +/-0.05°C). Overall, results of this study may facilitate development of standardized consensus test methods to enable consistent and accurate use of IRTs for fever screening.

78 FR 54564 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-05

... Linder Rgnl, Takeoff Minimums and Obstacle DP, Amdt 1 Venice, FL, Venice Muni, RNAV (GPS) RWY 5, Orig Venice, FL, Venice Muni, RNAV (GPS) RWY 23, Orig Venice, FL, Venice Muni, Takeoff Minimums and Obstacle...

7 CFR 51.308 - Methods of sampling and calculation of percentages.

Code of Federal Regulations, 2012 CFR

2012-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Methods of Sampling and Calculation... where the minimum diameter of the smallest apple does not vary more than 1/2 inch from the minimum diameter of the largest apple, percentages shall be calculated on the basis of count. (b) In all other...

7 CFR 51.308 - Methods of sampling and calculation of percentages.

Code of Federal Regulations, 2011 CFR

2011-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Methods of Sampling and Calculation... where the minimum diameter of the smallest apple does not vary more than 1/2 inch from the minimum diameter of the largest apple, percentages shall be calculated on the basis of count. (b) In all other...

7 CFR 51.308 - Methods of sampling and calculation of percentages.

Code of Federal Regulations, 2010 CFR

2010-01-01

..., CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Methods of Sampling and Calculation... where the minimum diameter of the smallest apple does not vary more than 1/2 inch from the minimum diameter of the largest apple, percentages shall be calculated on the basis of count. (b) In all other...

Hygiene Factors: Using VLE Minimum Standards to Avoid Student Dissatisfaction

ERIC Educational Resources Information Center

Reed, Peter; Watmough, Simon

2015-01-01

Inconsistency in the use of Virtual Learning Environments (VLEs) has led to dissatisfaction amongst students and is an issue across the Higher Education sector. This paper outlines research undertaken in one faculty within one university to ascertain staff and student views on minimum standards within the VLE; how the VLE could reduce student…

25 CFR 543.20 - What are the minimum internal control standards for information technology and information...

Code of Federal Regulations, 2013 CFR

2013-04-01

... information technology and information technology data? 543.20 Section 543.20 Indians NATIONAL INDIAN GAMING... § 543.20 What are the minimum internal control standards for information technology and information... prevent the concealment of fraud. (4) Information technology agents having access to Class II gaming...

25 CFR 543.20 - What are the minimum internal control standards for information technology and information...

Code of Federal Regulations, 2014 CFR

2014-04-01

... information technology and information technology data? 543.20 Section 543.20 Indians NATIONAL INDIAN GAMING... § 543.20 What are the minimum internal control standards for information technology and information... prevent the concealment of fraud. (4) Information technology agents having access to Class II gaming...

29 CFR 1926.752 - Site layout, site-specific erection plan and construction sequence.

Code of Federal Regulations, 2011 CFR

2011-07-01

... standard test method of field-cured samples, either 75 percent of the intended minimum compressive design... the basis of an appropriate ASTM standard test method of field-cured samples, either 75 percent of the intended minimum compressive design strength or sufficient strength to support the loads imposed during...

29 CFR 1926.752 - Site layout, site-specific erection plan and construction sequence.

Code of Federal Regulations, 2013 CFR

2013-07-01

... standard test method of field-cured samples, either 75 percent of the intended minimum compressive design... the basis of an appropriate ASTM standard test method of field-cured samples, either 75 percent of the intended minimum compressive design strength or sufficient strength to support the loads imposed during...

29 CFR 1926.752 - Site layout, site-specific erection plan and construction sequence.

Code of Federal Regulations, 2012 CFR

2012-07-01

... standard test method of field-cured samples, either 75 percent of the intended minimum compressive design... the basis of an appropriate ASTM standard test method of field-cured samples, either 75 percent of the intended minimum compressive design strength or sufficient strength to support the loads imposed during...

29 CFR 1926.752 - Site layout, site-specific erection plan and construction sequence.

Code of Federal Regulations, 2010 CFR

2010-07-01

... standard test method of field-cured samples, either 75 percent of the intended minimum compressive design... the basis of an appropriate ASTM standard test method of field-cured samples, either 75 percent of the intended minimum compressive design strength or sufficient strength to support the loads imposed during...

29 CFR 1926.752 - Site layout, site-specific erection plan and construction sequence.

Code of Federal Regulations, 2014 CFR

2014-07-01

... standard test method of field-cured samples, either 75 percent of the intended minimum compressive design... the basis of an appropriate ASTM standard test method of field-cured samples, either 75 percent of the intended minimum compressive design strength or sufficient strength to support the loads imposed during...

75 FR 75485 - Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-03

... Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for Federal... Guidelines for Federal Workplace Drug Testing Programs (Mandatory Guidelines). The Mandatory Guidelines were... Laboratories and Instrumented Initial Testing Facilities (IITF) must meet in order to conduct drug and specimen...

75 FR 62842 - Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-10-13

... Current List of Laboratories Which Meet Minimum Standards To Engage in Urine Drug Testing for Federal... Guidelines for Federal Workplace Drug Testing Programs (Mandatory Guidelines). The Mandatory Guidelines were... and Instrumented Initial Testing Facilities (IITF) must meet in order to conduct drug and specimen...

Guidelines and Minimum Standards for Operation of Texas Proprietary Schools. (Revised.)

ERIC Educational Resources Information Center

Texas Education Agency, Austin. Div. of Proprietary Schools and Veterans Education.

This guide, prepared to assist owners and managers of proprietary schools in Texas in applying for and obtaining approval by the Texas Education Agency, provides guidelines and minimum standards of practice for proprietary school operation. First, the guidelines are discussed in terms of definitions, exemptions, general provisions, certificates of…

25 CFR 542.1 - What does this part cover?

Code of Federal Regulations, 2010 CFR

2010-04-01

... 25 Indians 2 2010-04-01 2010-04-01 false What does this part cover? 542.1 Section 542.1 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM INTERNAL CONTROL STANDARDS § 542.1 What does this part cover? This part establishes the minimum internal control standards...

7 CFR 989.702 - Minimum grade standards for packed raisins.

Code of Federal Regulations, 2010 CFR

2010-01-01

... RAISINS PRODUCED FROM GRAPES GROWN IN CALIFORNIA Quality Control § 989.702 Minimum grade standards for... washed with water to assure a wholesome product. (2) Grades. (i) Marketing Order Grade A is a quality of... paragraph. (ii) Marketing Order Grade B is the quality of the Cluster Seedless raisins that have similar...

A Review of Legal Decisions Relevant to Technical Standards Used in Pharmacy School Admissions

PubMed Central

2017-01-01

The implementation of an effective and legally sound technical standards procedure for pharmacy schools requires a proactive approach by admissions officers. Applicants with disabilities are accorded significant rights that must not be infringed during the admissions process in order to ensure compliance with applicable law. This article provides a review of applicable state cases, federal cases, and OCR decisions and guidance to help pharmacy schools identify procedures and implement technical standards into their admissions processes as required by ACPE Standards 2016. PMID:28381897

77 FR 9169 - Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-02-16

... on 8260-15A. The large number of SIAPs, Takeoff Minimums and ODPs, in addition to their complex... (GPS) Y RWY 20, Amdt 1B Cambridge, MN, Cambridge Muni, Takeoff Minimums and Obstacle DP, Orig Pipestone, MN, Pipestone Muni, NDB RWY 36, Amdt 7, CANCELLED Rushford, MN, Rushford Muni, Takeoff Minimums and...

Critical Review of Industrial Techniques for Thermal-Conductivity Measurements of Thermal Insulation Materials

NASA Astrophysics Data System (ADS)

Hammerschmidt, Ulf; Hameury, Jacques; Strnad, Radek; Turzó-Andras, Emese; Wu, Jiyu

2015-07-01

This paper presents a critical review of current industrial techniques and instruments to measure the thermal conductivity of thermal insulation materials, especially those insulations that can operate at temperatures above and up to . These materials generally are of a porous nature. The measuring instruments dealt with here are selected based on their maximum working temperature that should be higher than at least . These instruments are special types of the guarded hot-plate apparatus, the guarded heat-flow meter, the transient hot-wire and hot-plane instruments as well as the laser/xenon flash devices. All technical characteristics listed are quoted from the generally accessible information of the relevant manufacturers. The paper includes rankings of the instruments according to their standard retail price, the maximum sample size, and maximum working temperature, as well as the minimum in their measurement range.

75 FR 39244 - Reliability Standards Development and NERC and Regional Entity Enforcement; Further Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-08

... Standards Development and NERC and Regional Entity Enforcement; Further Notice Concerning Technical... convene a Commissioner-led technical conference regarding issues pertaining to the development of... Corporation and the Regional Entities as previously announced.\\1\\ \\1\\ Notice of Technical Conference, 75 FR 35...

Safety Standards Plan for Middlesex County Vocational & Technical High Schools.

ERIC Educational Resources Information Center

Sommer, Cy

This vocational education safety standards plan outlines rules and regulations adopted by the Board of Education of Middlesex County Vocational and Technical High Schools. The first of eleven chapters presents demographics and a safety organization table for Middlesex County Vocational and Technical Schools. In chapter 2, six safety program…

7 CFR 802.0 - Applicability.

Code of Federal Regulations, 2010 CFR

2010-01-01

... requirements set forth in this part 802 describe certain specifications, tolerances, and other technical... Standards and Technology (NIST) Handbook 44, “Specifications, Tolerances, and Other Technical Requirements...), “Specifications and Tolerances for Reference Standards and Field Standard Weights and Measures,” (Handbook 105-1...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2011 CFR

2011-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2013 CFR

2013-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...

7 CFR 610.23 - State Technical Committee meetings.

Code of Federal Regulations, 2010 CFR

2010-01-01

... Technical Committee member. (b) NRCS will establish and maintain national standard operating procedures... standard operating procedures will outline items such as: The best practice approach to establishing... standard operating procedures established under paragraph (b) of this section, the State Conservationist...