Renewing Education: Selected Writings on Steiner Education.

ERIC Educational Resources Information Center

Edmunds, Francis

Having taught for nearly 30 years in Britain's first Rudolf Steiner school, Francis Edmunds founded Emerson College, an adult education and teacher training center where he was active until his death in 1989. This book contains a collection of Edmunds' writings on Steiner education mostly excerpted from "Child and Man,""The Michael…

School Readiness and Rudolf Steiner's Theory of Learning.

ERIC Educational Resources Information Center

Ogletree, Earl J.; Ujlaki, Vilma

This paper presents Rudolf Steiner's maturational readiness theory of human physiopsychology and comments on education in the Waldorf Schools. Discussion asserts that Steiner's concept of human development is complex and that intensive study is required for even a superficial understanding of "the four members of man": the physical,…

The effect of three different educational approaches on children's drawing ability: Steiner, Montessori and traditional.

PubMed

Cox, M V; Rowlands, A

2000-12-01

Although there is a national curriculum for art education in the UK there are also alternative approaches in the private sector. This paper addresses the issue of the effect of these approaches on children's drawing ability. To compare the drawing ability in three drawing tasks of children in Steiner, Montessori and traditional schools. The participants were 60 school children between the ages of 5;11 and 7;2. Twenty children were tested in each type of school. Each child completed three drawings: a free drawing, a scene and an observational drawing. As predicted, the free and scene drawings of children in the Steiner school were rated more highly than those of children in Montessori and traditional schools. Steiner children's use of colour was also rated more highly, although they did not use more colours than the other children. Steiner children used significantly more fantasy topics in their free drawings. Further observation indicated that the Steiner children were better at using the whole page and organising their drawings into a scene; their drawings were also more detailed. Contrary to previous research Montessori children did not draw more inanimate objects and geometrical shapes or fewer people than other children. Also, contrary to the prediction, Steiner children were significantly better rather than worse than other children at observational drawing. The results suggest that the approach to art education in Steiner schools is conducive not only to more highly rated imaginative drawings in terms of general drawing ability and use of colour but also to more accurate and detailed observational drawings.

Authentic Assessment in the First Steiner Academy

ERIC Educational Resources Information Center

Burnett, John

2009-01-01

In August 2008, the then Schools Minister, Andrew Adonis, gave the go-ahead for the privately funded Hereford Waldorf School to reopen as a tax-payer-funded Academy, sponsored by the Steiner Waldorf Schools Fellowship of Great Britain. Accordingly, the Steiner Academy Hereford opened in September 2008. In common with the 132 other Academies opened…

Humanizing the Humanities: Some Reflections on George Steiner's "Brutal Paradox."

ERIC Educational Resources Information Center

Karier, Clarence J.

1990-01-01

Considers how literary critic, George Steiner, explores the failure of Western Civilization to humanize humanity. Analyzes Steiner's ultimately elitist model of culture to shed light on implications of his brutal paradox in which Nazism's death camps are juxtaposed to high culture. Theorizes about the possibilities of a culture inclusive of all…

Rudolf Steiner Farm School, Hawthorne Valley.

ERIC Educational Resources Information Center

Rudolf Steiner Farm School, Harlemville, Ghent, NY.

The goal of the Rudolf Steiner Farm School (which employs the spiritual/scientific path of knowledge described by Rudolf Steiner in the early 1900's) is to awaken and cultivate the capacities of the full human being through education, the arts, and agriculture, in direct relationship with nature, the spiritual universe, and current times. The…

Educational Imperatives of the Evolution of Consciousness: The Integral Visions of Rudolf Steiner and Ken Wilber

ERIC Educational Resources Information Center

Gidley, Jennifer M.

2007-01-01

Rudolf Steiner and Ken Wilber claim that human consciousness is evolving beyond the "formal", abstract, intellectual mode toward a "post-formal", integral mode. Wilber calls this "vision-logic" and Steiner calls it "consciousness/spiritual soul". Both point to the emergence of more complex, dialectical,…

Psychological Processes and "The Staircase to Terrorism"

ERIC Educational Resources Information Center

Moghaddam, Fathali M.

2005-01-01

This paper presents replies to the comments of Paniagua and Steiner on his original article on terrorism. The author notes that several points raised by Paniagua and Steiner are insightful and help to broaden the range of factors to be considered on the staircase to terrorism. Steiner highlights the role of incitement, and this points to the…

76 FR 24840 - Safety Zone; 2011 Rohto Ironman 70.3 Miami, Biscayne Bay, Miami, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-03

... Lieutenant Paul A. Steiner, Sector Miami Prevention Department, Coast Guard; telephone 305-535-8724, e-mail Paul.A.Steiner@uscg.mil . If you have questions on viewing or submitting material to the docket, call... Lieutenant Paul A. Steiner, Sector Miami Prevention Department, Coast Guard; telephone 305-535-8724, e-mail...

Tolerance of image enhancement brightness and contrast in lateral cephalometric digital radiography for Steiner analysis

NASA Astrophysics Data System (ADS)

Rianti, R. A.; Priaminiarti, M.; Syahraini, S. I.

2017-08-01

Image enhancement brightness and contrast can be adjusted on lateral cephalometric digital radiographs to improve image quality and anatomic landmarks for measurement by Steiner analysis. To determine the limit value for adjustments of image enhancement brightness and contrast in lateral cephalometric digital radiography for Steiner analysis. Image enhancement brightness and contrast were adjusted on 100 lateral cephalometric radiography in 10-point increments (-30, -20, -10, 0, +10, +20, +30). Steiner analysis measurements were then performed by two observers. Reliabilities were tested by the Interclass Correlation Coefficient (ICC) and significance tested by ANOVA or the Kruskal Wallis test. No significant differences were detected in lateral cephalometric analysis measurements following adjustment of the image enhancement brightness and contrast. The limit value of adjustments of the image enhancement brightness and contrast associated with incremental 10-point changes (-30, -20, -10, 0, +10, +20, +30) does not affect the results of Steiner analysis.

76 FR 43958 - Safety Zone; Rotary Club of Fort Lauderdale New River Raft Race, New River, Fort Lauderdale, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-22

... have questions on this proposed rule, call or e-mail Lieutenant Paul A. Steiner, Sector Miami Prevention Department, Coast Guard; telephone 305-535-8724, e-mail Paul.A.Steiner@uscg.mil . If you have... Paul A. Steiner, Sector Miami Prevention Department, Coast Guard; telephone 305-535-8724, e-mail Paul.A...

U.S. Democratization Strategy: Origins and Obstacles

DTIC Science & Technology

2008-09-01

war was destroying Europe and Wilson’s non-intervention had won favor with the U.S. electorate, unwilling to partake in what Zara Steiner has aptly...33 Stanley Weintraub, Silent Night (New York: Simon and Schuster, 2001), p. 167. 34 Zara Steiner, The...Platter (Baltimore and London: The Johns Hopkins University Press, 2001). Steiner, Zara , The Lights that Failed: European International History

Edmondson-Steiner grade: A crucial predictor of recurrence and survival in hepatocellular carcinoma without microvascular invasio.

PubMed

Zhou, Li; Rui, Jing-An; Zhou, Wei-Xun; Wang, Shao-Bin; Chen, Shu-Guang; Qu, Qiang

2017-07-01

Microvascular invasion (MVI), an important pathologic parameter, has been proven to be a powerful predictor of long-term prognosis in hepatocellular carcinoma (HCC). However, prognostic factors in HCC without MVI remain unknown. The present study aimed to identify the risk factors of recurrence and poor post-resectional survival in this type of HCC. A total of 109 patients with MVI-absent HCC underwent radical hepatectomy were enrolled. The influence of clinicopathologic variables on recurrence and patient survival was assessed using univariate and multivariate analyses. Chi-square test found that Edmondson-Steiner grade and satellite nodule were significantly associated with recurrence, while the former was the single marker for early recurrence. Stepwise logistic regression analysis demonstrated the independent predictive role of Edmondson-Steiner grade for recurrence. On the other hand, Edmondson-Steiner grade, serum AFP level and satellite nodule were significant for overall and disease-free survival in univariate analysis, whereas tumor size was linked to disease-free survival. Of the variables, Edmondson-Steiner grade, serum AFP level and satellite nodule were independent indicators. Edmondson-Steiner grade, a histological classification, carries robust prognostic implications for all the endpoints for prognosis, thus being potential to be a crucial prognosticator in HCC without MVI. Copyright © 2017 Elsevier GmbH. All rights reserved.

The effect of attending steiner schools during childhood on health in adulthood: a multicentre cross-sectional study.

PubMed

Fischer, H Felix; Binting, Sylvia; Bockelbrink, Angelina; Heusser, Peter; Hueck, Christoph; Keil, Thomas; Roll, Stephanie; Witt, Claudia

2013-01-01

It is speculated that attending Steiner schools, whose pedagogical principles include an account for healthy psycho-physical development, may have long-term beneficial health effects. We examined whether the current health status differed between former attendees of German Steiner schools and adults from the general population. Furthermore, we examined factors that might explain those differences. We included former Steiner school attendees from 4 schools in Berlin, Hanover, Nuremberg and Stuttgart and randomly selected population controls. Using a self-report questionnaire we assessed sociodemographics, current and childhood lifestyle and health status. Outcomes were self-reports on 16 diseases: atopic dermatitis, allergic rhinitis, bronchial asthma, chronic obstructive pulmonary disease (COPD), cardiac arrhythmia, cardiac insufficiency, angina pectoris, arteriosclerosis, hypertension, hypercholesterolemia, osteoarthritis, rheumatism, cancer, diabetes, depression and multiple sclerosis. Furthermore, participants rated the symptom burden resulting from back pain, cold symptoms, headache, insomnia, joint pain, gastrointestinal symptoms and imbalance. Unadjusted and adjusted odds ratios were calculated for each outcome. 1136 Steiner school attendees and 1746 controls were eligible for analysis. Both groups were comparable regarding sex, age and region, but differed in nationality and educational status. After adjusting for possible confounders, we found statistically significant effects of Steiner school attendance for osteoarthritis (OR 0.69 [0.49-0.97]) and allergic rhinitis (OR 0.77, [0.59-1.00]) as well as for symptom burden from back pain (OR 0.80, [0.64-1.00]), insomnia (OR 0.65, [0.50-0.84]), joint pain (OR 0.62, [0.48-0.82]), gastrointestinal symptoms (OR 0.76, [0.58-1.00]) and imbalance (OR 0.60, [0.38-0.93]). The risk of most examined diseases did not differ between former Steiner school attendees and the general population after adjustment for sociodemographics, current and childhood lifestyle features, but symptom burden from some current health complaints was reported less by former Steiner school attendees. Results must be interpreted with caution since the analysis was exploratory.

8TH International Laser Physics Workshop Lphys󈨧 Budapest, July 2-6, 1999, Program

DTIC Science & Technology

1999-07-05

Gerhard J. MUller (Germany) Rudolf Steiner (Germany) Symposium Status and Future Directions of High-Power Laser Installations Co-Chairs: See Leang...Sciences, Kazan. Russia I.A. Shcherbakov General Physics Institute. Russian Academy of Sciences. Moscow, Russia R. Steiner Institute of Laser Technologies...14.50-15.15 R. Steiner , A. Pohl, A. Bentele, T. Meier (Ulm, Germany) Laser Doppler sensor for laser assisted injection 30 SEMINAR 5 --- LASER METHODS IN

Wiedemann-Steiner Syndrome With 2 Novel KMT2A Mutations.

PubMed

Min Ko, Jung; Cho, Jae So; Yoo, Yongjin; Seo, Jieun; Choi, Murim; Chae, Jong-Hee; Lee, Hye-Ran; Cho, Tae-Joon

2017-02-01

Wiedemann-Steiner syndrome is a rare genetic disorder characterized by short stature, hairy elbows, facial dysmorphism, and developmental delay. It can also be accompanied by musculoskeletal anomalies such as muscular hypotonia and small hands and feet. Mutations in the KMT2A gene have only recently been identified as the cause of Wiedemann-Steiner syndrome; therefore, only 16 patients from 15 families have been described, and new phenotypic features continue to be added. In this report, we describe 2 newly identified patients with Wiedemann-Steiner syndrome who presented with variable severity. One girl exhibited developmental dysplasia of the hip and fibromatosis colli accompanied by other clinical features, including facial dysmorphism, hypertrichosis, patent ductus arteriosus, growth retardation, and borderline intellectual disability. The other patient, a boy, showed severe developmental retardation with automatic self-mutilation, facial dysmorphism, and hypertrichosis at a later age. Exome sequencing analysis of these patients and their parents revealed a de novo nonsense mutation, p.Gln1978*, of KMT2A in the former, and a missense mutation, p.Gly1168Asp, in the latter, which molecularly confirmed the diagnosis of Wiedemann-Steiner syndrome.

Steiner's Amazing Porism

ERIC Educational Resources Information Center

Fletcher, Trevor

2007-01-01

In this article, the author describes his experiments with Steiner's Porism using the drawing/animation program "Cinderella" and discusses insights into this theorem gleaned from the manipulation of his animation. (Contains 2 notes.)

The Effect of Attending Steiner Schools during Childhood on Health in Adulthood: A Multicentre Cross-Sectional Study

PubMed Central

Fischer, H. Felix; Binting, Sylvia; Bockelbrink, Angelina; Heusser, Peter; Hueck, Christoph; Keil, Thomas; Roll, Stephanie; Witt, Claudia

2013-01-01

Background It is speculated that attending Steiner schools, whose pedagogical principles include an account for healthy psycho-physical development, may have long-term beneficial health effects. We examined whether the current health status differed between former attendees of German Steiner schools and adults from the general population. Furthermore, we examined factors that might explain those differences. Methods We included former Steiner school attendees from 4 schools in Berlin, Hanover, Nuremberg and Stuttgart and randomly selected population controls. Using a self-report questionnaire we assessed sociodemographics, current and childhood lifestyle and health status. Outcomes were self-reports on 16 diseases: atopic dermatitis, allergic rhinitis, bronchial asthma, chronic obstructive pulmonary disease (COPD), cardiac arrhythmia, cardiac insufficiency, angina pectoris, arteriosclerosis, hypertension, hypercholesterolemia, osteoarthritis, rheumatism, cancer, diabetes, depression and multiple sclerosis. Furthermore, participants rated the symptom burden resulting from back pain, cold symptoms, headache, insomnia, joint pain, gastrointestinal symptoms and imbalance. Unadjusted and adjusted odds ratios were calculated for each outcome. Results 1136 Steiner school attendees and 1746 controls were eligible for analysis. Both groups were comparable regarding sex, age and region, but differed in nationality and educational status. After adjusting for possible confounders, we found statistically significant effects of Steiner school attendance for osteoarthritis (OR 0.69 [0.49–0.97]) and allergic rhinitis (OR 0.77, [0.59–1.00]) as well as for symptom burden from back pain (OR 0.80, [0.64–1.00]), insomnia (OR 0.65, [0.50–0.84]), joint pain (OR 0.62, [0.48–0.82]), gastrointestinal symptoms (OR 0.76, [0.58–1.00]) and imbalance (OR 0.60, [0.38–0.93]). Conclusions The risk of most examined diseases did not differ between former Steiner school attendees and the general population after adjustment for sociodemographics, current and childhood lifestyle features, but symptom burden from some current health complaints was reported less by former Steiner school attendees. Results must be interpreted with caution since the analysis was exploratory. PMID:24069175

Mobility based multicast routing in wireless mesh networks

NASA Astrophysics Data System (ADS)

Jain, Sanjeev; Tripathi, Vijay S.; Tiwari, Sudarshan

2013-01-01

There exist two fundamental approaches to multicast routing namely minimum cost trees and shortest path trees. The (MCT's) minimum cost tree is one which connects receiver and sources by providing a minimum number of transmissions (MNTs) the MNTs approach is generally used for energy constraint sensor and mobile ad hoc networks. In this paper we have considered node mobility and try to find out simulation based comparison of the (SPT's) shortest path tree, (MST's) minimum steiner trees and minimum number of transmission trees in wireless mesh networks by using the performance metrics like as an end to end delay, average jitter, throughput and packet delivery ratio, average unicast packet delivery ratio, etc. We have also evaluated multicast performance in the small and large wireless mesh networks. In case of multicast performance in the small networks we have found that when the traffic load is moderate or high the SPTs outperform the MSTs and MNTs in all cases. The SPTs have lowest end to end delay and average jitter in almost all cases. In case of multicast performance in the large network we have seen that the MSTs provide minimum total edge cost and minimum number of transmissions. We have also found that the one drawback of SPTs, when the group size is large and rate of multicast sending is high SPTs causes more packet losses to other flows as MCTs.

Dental Health and Orthodontic Problems

MedlinePlus

... of yesteryear. Dr. Jim Steiner, director of pediatric dentistry at Children’s Hospital in Cincinnati, Ohio, attributes the ... ago,” says Dr. Jim Steiner, director of pediatric dentistry at Children's Hospital in cincinnati, Ohio, “the silver ...

Roy-Steiner equations for πN scattering

NASA Astrophysics Data System (ADS)

Ruiz de Elvira, J.; Ditsche, C.; Hoferichter, M.; Kubis, B.; Meißner, U.-G.

2014-06-01

In this talk, we present a coupled system of integral equations for the πN → πN (s-channel) and ππ → N̅N (t-channel) lowest partial waves, derived from Roy-Steiner equations for pion-nucleon scattering. After giving a brief overview of this system of equations, we present the solution of the t-channel sub-problem by means of Muskhelishvili-Omnès techniques, and solve the s-channel sub-problem after finding a set of phase shifts and subthreshold parameters which satisfy the Roy-Steiner equations.

76 FR 8656 - Safety Zone; Miami International Triathlon, Bayfront Park, Miami, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-15

...-mail Lieutenant Paul A. Steiner, Sector Miami Prevention Department, Coast Guard; telephone 305-535-8724, e-mail Paul.A.Steiner@uscg.mil . If you have questions on viewing the docket, call Renee V...

Geometric Form Drawing: A Perceptual-Motor Approach to Preventive Remediation (The Steiner Approach)

ERIC Educational Resources Information Center

Ogletree, Earl J.

1975-01-01

Provided is a rationale for geometric form drawing developed by Rudolf Steiner as a tool to develop motor coordination, perceptual skills, and cognition for mentally retarded and perceptually handicapped children. (Author/CL)

A comparison of the Cook single lumen immature ovum IVM needle to the Steiner-Tan pseudo double lumen flushing needle for oocyte retrieval for IVM.

PubMed

Rose, B I; Laky, D

2013-06-01

This study compared the impact of using the Steiner-Tan pseudo double lumen needle for antral follicle oocyte retrieval to using a conventional non-flushing needle. The Steiner-Tan needle has a much smaller dead space than the needles commonly used for IVM oocyte retrievals. This was a retrospective cohort study. The patient population was determined by the time period in which a patient underwent IVM in a single physician's IVF practice. The following data was abstracted from clinical and embryology records: oocytes retrieved, oocytes matured, early maturing oocytes, oocytes fertilized, embryo quality measures, retrieval time, needle punctures, clot formation, and clinical pregnancy rate. The Steiner-Tan needle did not increase the number of oocytes retrieved. It also did not increase the time required for retrieval. However, flushing of antral follicles significantly decreased clot formation in fluid aspirates. Use of the Steiner-Tan needle also significantly decreased the number of vaginal needle punctures during each case. There was a trend toward improved embryo quality, but statistical power was inadequate to show a difference. The primary benefit of the Steiner-Tan needle was on the embryological aspects of IVM. Decreased blood and blood clots in the aspirates made an IVM retrieval more like conventional IVF for the embryologist. The patient also experienced less tissue trauma without increasing anesthesia or surgical time. There was no improvement in the number of oocytes retrieved, but based on the results, we hypothesized that oocytes were more commonly retrieved from slightly large follicles than when using a routine needle.

Individual Differences in Learning from Verbal and Figural Materials.

DTIC Science & Technology

1980-09-01

price floors and ceilings, taxation, and agricultural problems. Materials were adapted from introductory college economics textbooks (Lipsey and Steiner...introductory college economics textbooks (Lipsey and Steiner, 1969; Samuelson, 1976; Spencer, 1977; Sutton, 1976), but presented at a level appropriate

76 FR 29642 - Special Local Regulations; Miami Super Boat Grand Prix, Miami Beach, FL

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-23

... INFORMATION CONTACT: If you have questions on this rule, call or e-mail Lieutenant Paul A. Steiner, Sector Miami Prevention Department, Coast Guard; telephone 305-535-8724, e-mail Paul.A.Steiner@uscg.mil . If...

Discovering Steiner Triple Systems through Problem Solving

ERIC Educational Resources Information Center

Sriraman, Bharath

2004-01-01

An attempt to implement problem solving as a teacher of ninth grade algebra is described. The problems selected were not general ones, they involved combinations and represented various situations and were more complex which lead to the discovery of Steiner triple systems.

Practising Empathy: Enacting Alternative Perspectives through Imaginative Play

ERIC Educational Resources Information Center

Waite, Sue; Rees, Sarah

2014-01-01

This article reports on a collaborative study using an innovative methodology, based on "insiders" who are Steiner practitioners knowledgeable and practised in Steiner philosophy and "outsiders" from UK mainstream early years and primary perspectives. Although the study as a whole focused on assessment and observation used in…

Waldorf Education: Theory of Child Development and Teaching Methods.

ERIC Educational Resources Information Center

Ogletree, Earl J.

This paper examines the educational philosophy underlying Waldorf Education, focusing on Rudolf Steiner's concept of "vital" or etheric energy and comparing Piaget's and Steiner's stages of cognition. The paper begins with a discussion of school readiness and the trend toward lowering the school entry age, and maintains that this trend…

Montessori and Steiner: A Pattern of Reverse Symmetries.

ERIC Educational Resources Information Center

Coulter, Dee Joy

2003-01-01

Explains the educational movements precipitated by Maria Montessori and Rudolf Steiner as comprising a pattern of reverse symmetries. Notes the influence of war on their philosophies. Discusses reverse symmetries in curriculum related to mathematics, geography, and history. Maintains that each of these two movements holds the other at its core,…

Creative Grammar and Art Education

ERIC Educational Resources Information Center

Cunliffe, Leslie

2011-01-01

The grammar of creative practices is described by George Steiner as the "articulate organisation of perception, reflection and experience, the nerve structure of consciousness when it communicates with itself and with others." Steiner's description of creative grammar is consistent with Lev Vygotsky's comment that "art is the social within us, and…

Soap films and GeoGebra in the study of Fermat and Steiner points

NASA Astrophysics Data System (ADS)

Flores, Alfinio; Park, Jungeun

2018-05-01

We discuss how mathematics and secondary mathematics education majors developed an understanding of Fermat points for the triangle as well as Steiner points for the square and regular pentagon, and also of soap film configurations between parallel plates where forces are in equilibrium. The activities included the use of soap films and the interactive geometry program GeoGebra. Students worked in small groups using these tools to investigate the properties of Fermat and Steiner points and then justified the results of their investigations using geometrical arguments. These activities are specific approaches of how to encourage prospective teachers to use physical experiments to support students' development of mathematical curiosity and mathematical justifications.

Myles A. Steiner | NREL

Science.gov Websites

; Emmett E. Perl, John Simon, Daniel J. Friedman, Nikhil Jain, Paul Sharps, Claiborne McPheeters, Yukun Sun , Kevin L. Schulte, Ryan M. France, William E. McMahon, Emmett E. Perl, Daniel J. Friedman, Journal of ; E.E. Perl, D. Kuciauskas, J. Simon, D.J. Friedman, M.A. Steiner, Journal of Applied Physics, 122

An Experiment on a Physical Pendulum and Steiner's Theorem

ERIC Educational Resources Information Center

Russeva, G. B.; Tsutsumanova, G. G.; Russev, S. C.

2010-01-01

Introductory physics laboratory curricula usually include experiments on the moment of inertia, the centre of gravity, the harmonic motion of a physical pendulum, and Steiner's theorem. We present a simple experiment using very low cost equipment for investigating these subjects in the general case of an asymmetrical test body. (Contains 3 figures…

An Education Lived

ERIC Educational Resources Information Center

Steiner, David

2009-01-01

This article is an autobiographical account of a remarkable childhood. In this essay, David Steiner, the Klara & Larry Silverstein Dean of the School of Education at Hunter College in New York, chronicles his early years and his road to Oxford. David is the son of George Steiner, the polymath who has scathingly denounced Western societies for the…

Holism in Teacher Development: A Goethean Perspective

ERIC Educational Resources Information Center

Oberski, Iddo; McNally, Jim

2007-01-01

Teaching has moved gradually from being seen as an art or craft to an evidence-based techno-rational profession. However, within Steiner-Waldorf schools, teachers are largely autonomous and seen, like their pupils, as always "coming into being", through the development of an objective imaginative faculty. This perspective is derived from Steiner's…

A Fascinating Application of Steiner's Theorem for Trapezium: Geometric Constructions Using Straightedge Alone

ERIC Educational Resources Information Center

Stupel, Moshe; Ben-Chaim, David

2013-01-01

Based on Steiner's fascinating theorem for trapezium, seven geometrical constructions using straight-edge alone are described. These constructions provide an excellent base for teaching theorems and the properties of geometrical shapes, as well as challenging thought and inspiring deeper insight into the world of geometry. In particular, this…

Fear and Attraction in Statecraft: Western Multilateralism’s Double-Edged Swords

DTIC Science & Technology

2013-06-01

Zara Steiner, The Lights that Failed: European International History 1919–1933 (Oxford: Oxford University Press, 2005) 1–5. 111 Gray, War, Peace and...Steven E. Miller, 104– 140. Cambridge, MA: The MIT Press, 2001. Steiner, Zara . The Lights that Failed: European International History 1919–1933. Oxford

Waldorf Schools: A Child-Centered System.

ERIC Educational Resources Information Center

Ogletree, Earl J.

This paper presents an overview of the philosophy, psychology of learning, teaching methods, and curriculum of the Waldorf Schools. Most Waldorf teachers are influenced by the esoteric form of critical idealism propounded by Rudolf Steiner. The child is considered by Steiner to be a spiritual being who has reincarnated on to earth in a physical…

Drawing and Painting in Rudolf Steiner Schools.

ERIC Educational Resources Information Center

Junemann, Margit; Weitmann, Fritz

This book gives an overview of the Waldorf School teaching plan and art curriculum. The book thoroughly investigates many aspects of art that Rudolf Steiner spoke of in lectures, notes, and demonstrations. Particular emphasis is placed upon his work on color. Specific lessons are given for the elementary classes, and discussions of principles and…

The Impact of the Self-Awareness Process on Learning and Leading

ERIC Educational Resources Information Center

Steiner, Patricia

2014-01-01

In this article, Patricia Steiner describes a research problem that took considerable time and energy to investigate: the study of the "self-awareness" process. Steiner states that, if we believe in the concept of lifelong learning and development, then we must acknowledge the value of self-awareness as an important precursor to learning…

A Scheme for Understanding Group Processes in Problem-Based Learning

ERIC Educational Resources Information Center

Hammar Chiriac, Eva

2008-01-01

The purpose of this study was to identify, describe and interpret group processes occurring in tutorials in problem-based learning. Another aim was to investigate if a combination of Steiner's (Steiner, I. D. (1972). "Group process and productivity". New York: Academic Press.) theory of group work and Bion's (Bion, W. R. (1961). "Experiences in…

Assessing New York's Commissioner of Education

ERIC Educational Resources Information Center

Meyer, Peter

2011-01-01

In this article, the author talks about the resignation of New York State's commissioner of education David Steiner, and how it will affect the state's Race to the Top. He contends that Steiner was savvy enough to understand the importance of Race to the Top and able enough to turn the state's education energies toward it. The "Washington…

Soap Films and GeoGebra in the Study of Fermat and Steiner Points

ERIC Educational Resources Information Center

Flores, Alfinio; Park, Jungeun

2018-01-01

We discuss how mathematics and secondary mathematics education majors developed an understanding of Fermat points for the triangle as well as Steiner points for the square and regular pentagon, and also of soap film configurations between parallel plates where forces are in equilibrium. The activities included the use of soap films and the…

On the Path towards Thinking: Learning from Martin Heidegger and Rudolf Steiner

ERIC Educational Resources Information Center

Dahlin, Bo

2009-01-01

This paper is a philosophical study of the nature of thinking based on the philosophies of Martin Heidegger and Rudolf Steiner. For Heidegger, the pre-Socratic Greek philosophers exemplified genuine thinking, appreciating the meaning of Being. But this kind of philosophy was soon replaced by the onto-theological approach, in which Being was…

The Effect of Steiner, Montessori, and National Curriculum Education upon Children's Pretence and Creativity

ERIC Educational Resources Information Center

Kirkham, Julie Ann; Kidd, Evan

2017-01-01

Pretence and creativity are often regarded as ubiquitous characteristics of childhood, yet not all education systems value or promote these attributes to the same extent. Different pedagogies and practices are evident within the UK National Curriculum, Steiner and Montessori schools. In this study, 20 children participated from each of these…

Closed Circular Chains

ERIC Educational Resources Information Center

Caglayan, Günhan

2016-01-01

A Steiner chain is defined as the sequence of n circles that are all tangent to two given non-intersecting circles. A closed chain, in particular, is one in which every circle in the sequence is tangent to the previous and next circles of the chain. In a closed Steiner chain the first and the "n"th circles of the chain are also tangent…

A Day in the Life of the Rudolf Steiner School.

ERIC Educational Resources Information Center

Prescott, Jennifer O.

1999-01-01

Describes a typical day at the Rudolf Steiner School, an arts-based Waldorf school that encourages students to be anything they want to be and integrates the arts into everything. Natural developmental stages is an intrinsic part of the curriculum. Students remain with the same teacher for 8 years. A sidebar notes what opponents say about Waldorf…

"Give Them Time" -- An Analysis of School Readiness in Ireland's Early Education System: A Steiner Waldorf Perspective

ERIC Educational Resources Information Center

O'Connor, Doireann; Angus, Jonathan

2014-01-01

This paper examines a Steiner Waldorf Perspective to School Readiness and applies that international ideology to educational practice and curriculum policy in modern Ireland. The case for a later school start is championed with strong arguments underpinning the reasons why a later start is better in the long run for children's formal learning…

Foreign Language Teaching in Rudolf Steiner Schools. Guidelines for Class-Teachers and Language Teachers. First Edition.

ERIC Educational Resources Information Center

Stott, Michael

This book is intended for foreign language teachers interested in the approaches used in Rudolf Steiner schools, and also classroom teachers who teach foreign languages. Chapters address these issues: what the language lesson is to achieve; how the language lesson differs from other lessons; lesson design; examples of actual lessons; avoiding the…

In memoriam Ladislau Steiner, neurosurgeon: some people from transylvania do live forever.

PubMed

Dinca, Eduard B; Ciurea, Alexandru V; Valéry, Charles-Ambroise

2014-01-01

We review the extraordinary professional trajectory of Ladislau Steiner, a prolific neurosurgeon and radiosurgeon, who died earlier this year. Dr. Steiner trained and practiced as a neurosurgeon in his native Romania until he was 42, before moving to Stockholm. After 25 years at the Karolinska Institute, when most people consider retirement, he spent the following 25 years of his life as director of the Lars Leksell Center for Gamma Knife Radiosurgery at the University of Virginia, Charlottesville, Virginia. At 90, nostalgia for Europe made him accept the position of director of the Gamma Knife Center at the International Neuroscience Institute in Hannover, Germany. His life was dedicated to the 15,000 patients whose lives he saved in his lengthy career. Copyright © 2014 Elsevier Inc. All rights reserved.

The Development of Early Literacy in Steiner- and Standard-Educated Children

ERIC Educational Resources Information Center

Cunningham, Anna J.; Carroll, Julia M.

2011-01-01

Background: There is evidence that children who are taught to read later in childhood (age 6-7) make faster progress in early literacy than those who are taught at a younger age (4-5 years), as is current practice in the UK. Aims: Steiner-educated children begin learning how to read at age 7, and have better reading-related skills at the onset of…

Bacterial and fungal components in house dust of farm children, Rudolf Steiner school children and reference children--the PARSIFAL Study.

PubMed

Schram, D; Doekes, G; Boeve, M; Douwes, J; Riedler, J; Ublagger, E; von Mutius, E; Budde, J; Pershagen, G; Nyberg, F; Alm, J; Braun-Fahrländer, C; Waser, M; Brunekreef, B

2005-05-01

Growing up on a farm and an anthroposophic lifestyle are associated with a lower prevalence of allergic diseases in childhood. It has been suggested that the enhanced exposure to endotoxin is an important protective factor of farm environments. Little is known about exposure to other microbial components on farms and exposure in anthroposophic families. To assess the levels and determinants of bacterial endotoxin, mould beta(1,3)-glucans and fungal extracellular polysaccharides (EPS) in house dust of farm children, Steiner school children and reference children. Mattress and living room dust was collected in the homes of 229 farm children, 122 Steiner children and 60 and 67 of their respective reference children in five European countries. Stable dust was collected as well. All samples were analysed in one central laboratory. Determinants were assessed by questionnaire. Levels of endotoxin, EPS and glucans per gram of house dust in farm homes were 1.2- to 3.2-fold higher than levels in reference homes. For Steiner children, 1.1- to 1.6-fold higher levels were observed compared with their reference children. These differences were consistently found across countries, although mean levels varied considerably. Differences between groups and between countries were also significant after adjustment for home and family characteristics. Farm children are not only consistently exposed to higher levels of endotoxin, but also to higher levels of mould components. Steiner school children may also be exposed to higher levels of microbial agents, but differences with reference children are much less pronounced than for farm children. Further analyses are, however, required to assess the association between exposure to these various microbial agents and allergic and airway diseases in the PARSIFAL population.

Teaching Mathematics in Rudolf Steiner Schools for Classes I-VIII. How To Become Imaginative and Holistic. Volume 1, Up to Age 14.

ERIC Educational Resources Information Center

Jarman, Ron

This book aims to present helpful, practical ideas and suggestions for mathematics teaching. Focus is on how teaching can be developed in a Rudolf Steiner (Waldorf) School and includes treatment of mathematical topics applicable to the 7-14 age group. Suggestions for curriculum and examples for children to work on are presented with a very wide…

The Pacification Campaign of Madagascar: 1896-1905

DTIC Science & Technology

2002-01-01

and 1940s. This was no improvised brutality. My German colleague, Rudolf Scharping revealed on 9 April details of a covert Serbian plan, code-named...administrator arrived to begin attempts to transfer authority to local institutions and to work to improve security and boost the economy. Steiner , a...Yugoslav President Slobodan Milosevic’s crackdown on ethnic Albanians in the province. Steiner also said he would focus on creating jobs in the province

Many-to-Many Multicast Routing Schemes under a Fixed Topology

PubMed Central

Ding, Wei; Wang, Hongfa; Wei, Xuerui

2013-01-01

Many-to-many multicast routing can be extensively applied in computer or communication networks supporting various continuous multimedia applications. The paper focuses on the case where all users share a common communication channel while each user is both a sender and a receiver of messages in multicasting as well as an end user. In this case, the multicast tree appears as a terminal Steiner tree (TeST). The problem of finding a TeST with a quality-of-service (QoS) optimization is frequently NP-hard. However, we discover that it is a good idea to find a many-to-many multicast tree with QoS optimization under a fixed topology. In this paper, we are concerned with three kinds of QoS optimization objectives of multicast tree, that is, the minimum cost, minimum diameter, and maximum reliability. All of three optimization problems are distributed into two types, the centralized and decentralized version. This paper uses the dynamic programming method to devise an exact algorithm, respectively, for the centralized and decentralized versions of each optimization problem. PMID:23589706

Roy-Steiner equations for πN scattering

NASA Astrophysics Data System (ADS)

de Elvira, J. Ruiz; Ditsche, C.; Hoferichter, M.; Kubis, B.; Meißner, U.-G.

2015-10-01

In this talk, we briefly review our ongoing collaboration to precisely determine the low-energy πN scattering amplitude by means of Roy-Steiner equations. After giving a brief overview of this system of dispersive equations and their application to πN scattering, we proceed to solve for the lower partial waves of the s-channel (πN → πN) and the t-channel l( {π π to bar NN} right) sub-problems.

Effects of Anti-G Measures on Gas Exchange.

DTIC Science & Technology

1981-05-01

position (+lGz), and the endotracheal tube was connected to a Rudolf valve arranged so that expired gas passed through a heated pneumotachograph and a... Steiner , 1960; Peterson, Bishop and Erickson, 1977). Data presented in Table 111-I suggest that application of the G-sult abdominal bladder tended to...accelerations. Aerospace Med. 31: 213-219, 1960. 18. Hershgold, E.J. and S.H. Steiner . Cardiovascular changes during acceleration stress in dogs. J

Multi-terminal pipe routing by Steiner minimal tree and particle swarm optimisation

NASA Astrophysics Data System (ADS)

Liu, Qiang; Wang, Chengen

2012-08-01

Computer-aided design of pipe routing is of fundamental importance for complex equipments' developments. In this article, non-rectilinear branch pipe routing with multiple terminals that can be formulated as a Euclidean Steiner Minimal Tree with Obstacles (ESMTO) problem is studied in the context of an aeroengine-integrated design engineering. Unlike the traditional methods that connect pipe terminals sequentially, this article presents a new branch pipe routing algorithm based on the Steiner tree theory. The article begins with a new algorithm for solving the ESMTO problem by using particle swarm optimisation (PSO), and then extends the method to the surface cases by using geodesics to meet the requirements of routing non-rectilinear pipes on the surfaces of aeroengines. Subsequently, the adaptive region strategy and the basic visibility graph method are adopted to increase the computation efficiency. Numeral computations show that the proposed routing algorithm can find satisfactory routing layouts while running in polynomial time.

Existence of Lipschitz selections of the Steiner map

NASA Astrophysics Data System (ADS)

Bednov, B. B.; Borodin, P. A.; Chesnokova, K. V.

2018-02-01

This paper is concerned with the problem of the existence of Lipschitz selections of the Steiner map {St}_n, which associates with n points of a Banach space X the set of their Steiner points. The answer to this problem depends on the geometric properties of the unit sphere S(X) of X, its dimension, and the number n. For n≥slant 4 general conditions are obtained on the space X under which {St}_n admits no Lipschitz selection. When X is finite dimensional it is shown that, if n≥slant 4 is even, the map {St}_n has a Lipschitz selection if and only if S(X) is a finite polytope; this is not true if n≥slant 3 is odd. For n=3 the (single-valued) map {St}_3 is shown to be Lipschitz continuous in any smooth strictly-convex two-dimensional space; this ceases to be true in three-dimensional spaces. Bibliography: 21 titles.

Water-quality assessment of Steiner Branch basin, Lafayette County, Wisconsin

USGS Publications Warehouse

Field, Stephen J.; Lidwin, R.A.

1982-01-01

Most of the nutrient load of the stream was transported during runoff: total organic nitrogen, 80 percent; ammonia nitrogen, 80 percent; total phosphorus, 84 percent; and total orthophosphorus, 77 percent. Transport of nitrite plus nitrate nitrogen and total nitrogen occurred primarily during baseflow conditions, with 75 and 56 percent, respectively, of the total load for the study period being transported during these conditions. The time distribution of total phosphorus, total orthophosphorus, ammonia nitrogen, and total organic nitrogen transport was very similar to suspended-sediment transport in Steiner Branch.

A construction of unimodular equiangular tight frames from resolvable Steiner systems

NASA Astrophysics Data System (ADS)

Jasper, John

2013-09-01

An equiangular tight frame (ETF) is an M x N matrix which has orthogonal equal norm rows, equal norm columns, and the inner products of all pairs of columns have the same modulus. In this paper we study ETFs in which all of the entries are unimodular, and in particular pth roots of unity. A new construction of unimodular ETFs based on resolvable Steiner systems is presented. This construction gives many new examples of unimodular ETFs. In particular, an new infinite class of ETFs with entries in f1;-1g is presented.

A physarum-inspired prize-collecting steiner tree approach to identify subnetworks for drug repositioning.

PubMed

Sun, Yahui; Hameed, Pathima Nusrath; Verspoor, Karin; Halgamuge, Saman

2016-12-05

Drug repositioning can reduce the time, costs and risks of drug development by identifying new therapeutic effects for known drugs. It is challenging to reposition drugs as pharmacological data is large and complex. Subnetwork identification has already been used to simplify the visualization and interpretation of biological data, but it has not been applied to drug repositioning so far. In this paper, we fill this gap by proposing a new Physarum-inspired Prize-Collecting Steiner Tree algorithm to identify subnetworks for drug repositioning. Drug Similarity Networks (DSN) are generated using the chemical, therapeutic, protein, and phenotype features of drugs. In DSNs, vertex prizes and edge costs represent the similarities and dissimilarities between drugs respectively, and terminals represent drugs in the cardiovascular class, as defined in the Anatomical Therapeutic Chemical classification system. A new Physarum-inspired Prize-Collecting Steiner Tree algorithm is proposed in this paper to identify subnetworks. We apply both the proposed algorithm and the widely-used GW algorithm to identify subnetworks in our 18 generated DSNs. In these DSNs, our proposed algorithm identifies subnetworks with an average Rand Index of 81.1%, while the GW algorithm can only identify subnetworks with an average Rand Index of 64.1%. We select 9 subnetworks with high Rand Index to find drug repositioning opportunities. 10 frequently occurring drugs in these subnetworks are identified as candidates to be repositioned for cardiovascular diseases. We find evidence to support previous discoveries that nitroglycerin, theophylline and acarbose may be able to be repositioned for cardiovascular diseases. Moreover, we identify seven previously unknown drug candidates that also may interact with the biological cardiovascular system. These discoveries show our proposed Prize-Collecting Steiner Tree approach as a promising strategy for drug repositioning.

Grappling with Weight Cutting. The Wisconsin Wrestling Minimum Weight Project.

ERIC Educational Resources Information Center

Oppliger, Robert A.; And Others

1995-01-01

In response to a new state rule, the Wisconsin Minimum Weight Project curtails weight cutting among high school wrestlers. The project uses skinfold testing to determine a minimum competitive weight and nutrition education to help the wrestler diet safety. It serves as a model for other states and other sports. (Author/SM)

Minimum weight structural sandwich

Treesearch

Edward W. Kuenzi

1965-01-01

This note presents theoretical analyses for determination of dimensions of structural sandwich of minimum weight that will have certain stiffness and load-carrying capabilities. Included is a brief discussion of the resultant minimum weight configurations.

41 CFR 302-7.103 - How are the charges calculated when a carrier charges a minimum weight, but the actual weight of...

Code of Federal Regulations, 2010 CFR

2010-07-01

...-TRANSPORTATION AND TEMPORARY STORAGE OF HOUSEHOLD GOODS AND PROFESSIONAL BOOKS, PAPERS, AND EQUIPMENT (PBP&E... calculated when a carrier charges a minimum weight, but the actual weight of HHG, PBP&E and temporary storage... actual weight of HHG, PBP&E and temporary storage is less than the minimum weight charged? Charges for...

Intractable nausea, vomiting and diarrhea in a Mexican woman with No recent travel history.

PubMed

Dimaunahan, C; Nader, S; Watson, R; Lewin, M R

2000-01-01

A 45-year-old Mexican woman with a history of noninsulin dependent diabetes mellitus (NIDDM), hypertension, and coronary artery disease presented to the hospital after 2 months of intractable nausea, vomiting and diarrhea-all made worse by eating and drinking. She reported fever, chills, anorexia and a documented 50-pound weight loss during this period. She denied the signs and symptoms of melena, hematochezia, steatorrhea or constipation. She also reported left leg pain and decreased sensation and strength of her left leg compared to the right leg. She had been hospitalized 2 weeks prior to admission with the same symptoms and a diagnosis of viral gastroenteritis. She was also treated for H. pylori, but subsequent biopsy results were negative by Steiner stain.

Structure and formation of ant transportation networks

PubMed Central

Latty, Tanya; Ramsch, Kai; Ito, Kentaro; Nakagaki, Toshiyuki; Sumpter, David J. T.; Middendorf, Martin; Beekman, Madeleine

2011-01-01

Many biological systems use extensive networks for the transport of resources and information. Ants are no exception. How do biological systems achieve efficient transportation networks in the absence of centralized control and without global knowledge of the environment? Here, we address this question by studying the formation and properties of inter-nest transportation networks in the Argentine ant (Linepithema humile). We find that the formation of inter-nest networks depends on the number of ants involved in the construction process. When the number of ants is sufficient and networks do form, they tend to have short total length but a low level of robustness. These networks are topologically similar to either minimum spanning trees or Steiner networks. The process of network formation involves an initial construction of multiple links followed by a pruning process that reduces the number of trails. Our study thus illuminates the conditions under and the process by which minimal biological transport networks can be constructed. PMID:21288958

Efficient Wide Baseline Structure from Motion

NASA Astrophysics Data System (ADS)

Michelini, Mario; Mayer, Helmut

2016-06-01

This paper presents a Structure from Motion approach for complex unorganized image sets. To achieve high accuracy and robustness, image triplets are employed and (an approximate) camera calibration is assumed to be known. The focus lies on a complete linking of images even in case of large image distortions, e.g., caused by wide baselines, as well as weak baselines. A method for embedding image descriptors into Hamming space is proposed for fast image similarity ranking. The later is employed to limit the number of pairs to be matched by a wide baseline method. An iterative graph-based approach is proposed formulating image linking as the search for a terminal Steiner minimum tree in a line graph. Finally, additional links are determined and employed to improve the accuracy of the pose estimation. By this means, loops in long image sequences are implicitly closed. The potential of the proposed approach is demonstrated by results for several complex image sets also in comparison with VisualSFM.

Incremental triangulation by way of edge swapping and local optimization

NASA Technical Reports Server (NTRS)

Wiltberger, N. Lyn

1994-01-01

This document is intended to serve as an installation, usage, and basic theory guide for the two dimensional triangulation software 'HARLEY' written for the Silicon Graphics IRIS workstation. This code consists of an incremental triangulation algorithm based on point insertion and local edge swapping. Using this basic strategy, several types of triangulations can be produced depending on user selected options. For example, local edge swapping criteria can be chosen which minimizes the maximum interior angle (a MinMax triangulation) or which maximizes the minimum interior angle (a MaxMin or Delaunay triangulation). It should be noted that the MinMax triangulation is generally only locally optical (not globally optimal) in this measure. The MaxMin triangulation, however, is both locally and globally optical. In addition, Steiner triangulations can be constructed by inserting new sites at triangle circumcenters followed by edge swapping based on the MaxMin criteria. Incremental insertion of sites also provides flexibility in choosing cell refinement criteria. A dynamic heap structure has been implemented in the code so that once a refinement measure is specified (i.e., maximum aspect ratio or some measure of a solution gradient for the solution adaptive grid generation) the cell with the largest value of this measure is continually removed from the top of the heap and refined. The heap refinement strategy allows the user to specify either the number of cells desired or refine the mesh until all cell refinement measures satisfy a user specified tolerance level. Since the dynamic heap structure is constantly updated, the algorithm always refines the particular cell in the mesh with the largest refinement criteria value. The code allows the user to: triangulate a cloud of prespecified points (sites), triangulate a set of prespecified interior points constrained by prespecified boundary curve(s), Steiner triangulate the interior/exterior of prespecified boundary curve(s), refine existing triangulations based on solution error measures, and partition meshes based on the Cuthill-McKee, spectral, and coordinate bisection strategies.

A de novo Mutation in KMT2A (MLL) in monozygotic twins with Wiedemann-Steiner syndrome.

PubMed

Dunkerton, Sophie; Field, Matthew; Cho, Vicki; Bertram, Edward; Whittle, Belinda; Groves, Alexandra; Goel, Himanshu

2015-09-01

Growth deficiency, psychomotor delay, and facial dysmorphism was originally described in a male patient in 1989 by Wiedemann et al. and later in 2000 by Steiner et al. Wiedemann-Steiner syndrome (WSS) has since been described only a few times in the literature, with the phenotypic spectrum both expanding and becoming more delineated with each patient reported. We report on the clinical and molecular features of monozygotic twins with a de novo mutation in KMT2A. Single nucleotide polymorphism (SNP) microarray was done on both twins and whole-exome sequencing was done using both parents and one of the affected twins. SNP microarray confirmed that they were monozygotic twins. A de novo heterozygous variant (p. Arg1083*) in the KMT2A gene was identified through whole-exome sequencing, confirming the diagnosis of WSS. In this study, we have identified a de novo mutation in KMT2A associated with psychomotor developmental delay, facial dysmorphism, short stature, hypertrichosis cubiti, and small kidneys. This finding in monozygotic twins gives specificity to the WSS. The description of more cases of WSS is needed for further delineation of this condition. Small kidneys with normal function have not been described in this condition in the medical literature before. © 2015 Wiley Periodicals, Inc.

The just provision of health care: a reply to Elizabeth Telfer.

PubMed Central

Steiner, H

1976-01-01

Dr Hillel Steiner in this reply to Elizabeth Telfer takes each of her arguments for different arrangements of a health service and examines them--'four positions which can be located on a linear ideological spectrum'--and adds a fifth which could have the effect of 'turning the alleged linear spectrum into a circle'. Underlying both Elizabeth Telfer's article and Dr Steiner's reply, the base is inescapably a 'political' one, but cannot be abandoned in favour of purely philosophical concepts. Whatever the attitude of mind of the reader of these two papers to the provision of a health service, the stimulus to more careful assessments of our own National Health Service and its problems can only be good. PMID:1003436

Roy-Steiner-equation analysis of pion-nucleon scattering

NASA Astrophysics Data System (ADS)

Meißner, U.-G.; Ruiz de Elvira, J.; Hoferichter, M.; Kubis, B.

2017-03-01

Low-energy pion-nucleon scattering is relevant for many areas in nuclear and hadronic physics, ranging from the scalar couplings of the nucleon to the long-range part of two-pion-exchange potentials and three-nucleon forces in Chiral Effective Field Theory. In this talk, we show how the fruitful combination of dispersion-theoretical methods, in particular in the form of Roy-Steiner equations, with modern high-precision data on hadronic atoms allows one to determine the pion-nucleon scattering amplitudes at low energies with unprecedented accuracy. Special attention will be paid to the extraction of the pion-nucleon σ-term, and we discuss in detail the current tension with recent lattice results, as well as the determination of the low-energy constants of chiral perturbation theory.

Pion-nucleon scattering: from chiral perturbation theory to Roy-Steiner equations

NASA Astrophysics Data System (ADS)

Kubis, Bastian; Hoferichter, Martin; de Elvira, Jacobo Ruiz; Meißner, Ulf-G.

2016-11-01

Ever since Weinberg's seminal predictions of the pion-nucleon scattering amplitudes at threshold, this process has been of central interest for the study of chiral dynamics involving nucleons. The scattering lengths or the pion-nucleon σ-term are fundamental quantities characterizing the explicit breaking of chiral symmetry by means of the light quark masses. On the other hand, pion-nucleon dynamics also strongly affects the long-range part of nucleon-nucleon potentials, and hence has a far-reaching impact on nuclear physics. We discuss the fruitful combination of dispersion-theoretical methods, in the form of Roy-Steiner equations, with chiral dynamics to determine pion-nucleon scattering amplitudes at low energies with high precision.*

Modification of Prim’s algorithm on complete broadcasting graph

NASA Astrophysics Data System (ADS)

Dairina; Arif, Salmawaty; Munzir, Said; Halfiani, Vera; Ramli, Marwan

2017-09-01

Broadcasting is an information dissemination from one object to another object through communication between two objects in a network. Broadcasting for n objects can be solved by n - 1 communications and minimum time unit defined by ⌈2log n⌉ In this paper, weighted graph broadcasting is considered. The minimum weight of a complete broadcasting graph will be determined. Broadcasting graph is said to be complete if every vertex is connected. Thus to determine the minimum weight of complete broadcasting graph is equivalent to determine the minimum spanning tree of a complete graph. The Kruskal’s and Prim’s algorithm will be used to determine the minimum weight of a complete broadcasting graph regardless the minimum time unit ⌈2log n⌉ and modified Prim’s algorithm for the problems of the minimum time unit ⌈2log n⌉ is done. As an example case, here, the training of trainer problem is solved using these algorithms.

Primal-dual techniques for online algorithms and mechanisms

NASA Astrophysics Data System (ADS)

Liaghat, Vahid

An offline algorithm is one that knows the entire input in advance. An online algorithm, however, processes its input in a serial fashion. In contrast to offline algorithms, an online algorithm works in a local fashion and has to make irrevocable decisions without having the entire input. Online algorithms are often not optimal since their irrevocable decisions may turn out to be inefficient after receiving the rest of the input. For a given online problem, the goal is to design algorithms which are competitive against the offline optimal solutions. In a classical offline scenario, it is often common to see a dual analysis of problems that can be formulated as a linear or convex program. Primal-dual and dual-fitting techniques have been successfully applied to many such problems. Unfortunately, the usual tricks come short in an online setting since an online algorithm should make decisions without knowing even the whole program. In this thesis, we study the competitive analysis of fundamental problems in the literature such as different variants of online matching and online Steiner connectivity, via online dual techniques. Although there are many generic tools for solving an optimization problem in the offline paradigm, in comparison, much less is known for tackling online problems. The main focus of this work is to design generic techniques for solving integral linear optimization problems where the solution space is restricted via a set of linear constraints. A general family of these problems are online packing/covering problems. Our work shows that for several seemingly unrelated problems, primal-dual techniques can be successfully applied as a unifying approach for analyzing these problems. We believe this leads to generic algorithmic frameworks for solving online problems. In the first part of the thesis, we show the effectiveness of our techniques in the stochastic settings and their applications in Bayesian mechanism design. In particular, we introduce new techniques for solving a fundamental linear optimization problem, namely, the stochastic generalized assignment problem (GAP). This packing problem generalizes various problems such as online matching, ad allocation, bin packing, etc. We furthermore show applications of such results in the mechanism design by introducing Prophet Secretary, a novel Bayesian model for online auctions. In the second part of the thesis, we focus on the covering problems. We develop the framework of "Disk Painting" for a general class of network design problems that can be characterized by proper functions. This class generalizes the node-weighted and edge-weighted variants of several well-known Steiner connectivity problems. We furthermore design a generic technique for solving the prize-collecting variants of these problems when there exists a dual analysis for the non-prize-collecting counterparts. Hence, we solve the online prize-collecting variants of several network design problems for the first time. Finally we focus on designing techniques for online problems with mixed packing/covering constraints. We initiate the study of degree-bounded graph optimization problems in the online setting by designing an online algorithm with a tight competitive ratio for the degree-bounded Steiner forest problem. We hope these techniques establishes a starting point for the analysis of the important class of online degree-bounded optimization on graphs.

Transoral laser surgery for laryngeal carcinoma: has Steiner achieved a genuine paradigm shift in oncological surgery?

PubMed

Harris, A T; Tanyi, A; Hart, R D; Trites, J; Rigby, M H; Lancaster, J; Nicolaides, A; Taylor, S M

2018-01-01

Transoral laser microsurgery applies to the piecemeal removal of malignant tumours of the upper aerodigestive tract using the CO 2 laser under the operating microscope. This method of surgery is being increasingly popularised as a single modality treatment of choice in early laryngeal cancers (T1 and T2) and occasionally in the more advanced forms of the disease (T3 and T4), predominantly within the supraglottis. Thomas Kuhn, the American physicist turned philosopher and historian of science, coined the phrase 'paradigm shift' in his groundbreaking book The Structure of Scientific Revolutions. He argued that the arrival of the new and often incompatible idea forms the core of a new paradigm, the birth of an entirely new way of thinking. This article discusses whether Steiner and colleagues truly brought about a paradigm shift in oncological surgery. By rejecting the principle of en block resection and by replacing it with the belief that not only is it oncologically safe to cut through the substance of the tumour but in doing so one can actually achieve better results, Steiner was able to truly revolutionise the management of laryngeal cancer. Even though within this article the repercussions of his insight are limited to the upper aerodigestive tract oncological surgery, his willingness to question other peoples' dogma makes his contribution truly a genuine paradigm shift.

The Effect of an Increased Minimum Wage on Infant Mortality and Birth Weight

PubMed Central

Livingston, Melvin D.; Markowitz, Sara; Wagenaar, Alexander C.

2016-01-01

Objectives. To investigate the effects of state minimum wage laws on low birth weight and infant mortality in the United States. Methods. We estimated the effects of state-level minimum wage laws using a difference-in-differences approach on rates of low birth weight (< 2500 g) and postneonatal mortality (28–364 days) by state and month from 1980 through 2011. All models included state and year fixed effects as well as state-specific covariates. Results. Across all models, a dollar increase in the minimum wage above the federal level was associated with a 1% to 2% decrease in low birth weight births and a 4% decrease in postneonatal mortality. Conclusions. If all states in 2014 had increased their minimum wages by 1 dollar, there would likely have been 2790 fewer low birth weight births and 518 fewer postneonatal deaths for the year. PMID:27310355

The Effect of an Increased Minimum Wage on Infant Mortality and Birth Weight.

PubMed

Komro, Kelli A; Livingston, Melvin D; Markowitz, Sara; Wagenaar, Alexander C

2016-08-01

To investigate the effects of state minimum wage laws on low birth weight and infant mortality in the United States. We estimated the effects of state-level minimum wage laws using a difference-in-differences approach on rates of low birth weight (< 2500 g) and postneonatal mortality (28-364 days) by state and month from 1980 through 2011. All models included state and year fixed effects as well as state-specific covariates. Across all models, a dollar increase in the minimum wage above the federal level was associated with a 1% to 2% decrease in low birth weight births and a 4% decrease in postneonatal mortality. If all states in 2014 had increased their minimum wages by 1 dollar, there would likely have been 2790 fewer low birth weight births and 518 fewer postneonatal deaths for the year.

Matching Pion-Nucleon Roy-Steiner Equations to Chiral Perturbation Theory.

PubMed

Hoferichter, Martin; Ruiz de Elvira, Jacobo; Kubis, Bastian; Meissner, Ulf-G

2015-11-06

We match the results for the subthreshold parameters of pion-nucleon scattering obtained from a solution of Roy-Steiner equations to chiral perturbation theory up to next-to-next-to-next-to-leading order, to extract the pertinent low-energy constants including a comprehensive analysis of systematic uncertainties and correlations. We study the convergence of the chiral series by investigating the chiral expansion of threshold parameters up to the same order and discuss the role of the Δ(1232) resonance in this context. Results for the low-energy constants are also presented in the counting scheme usually applied in chiral nuclear effective field theory, where they serve as crucial input to determine the long-range part of the nucleon-nucleon potential as well as three-nucleon forces.

Matching Pion-Nucleon Roy-Steiner Equations to Chiral Perturbation Theory

NASA Astrophysics Data System (ADS)

Hoferichter, Martin; Ruiz de Elvira, Jacobo; Kubis, Bastian; Meißner, Ulf-G.

2015-11-01

We match the results for the subthreshold parameters of pion-nucleon scattering obtained from a solution of Roy-Steiner equations to chiral perturbation theory up to next-to-next-to-next-to-leading order, to extract the pertinent low-energy constants including a comprehensive analysis of systematic uncertainties and correlations. We study the convergence of the chiral series by investigating the chiral expansion of threshold parameters up to the same order and discuss the role of the Δ (1232 ) resonance in this context. Results for the low-energy constants are also presented in the counting scheme usually applied in chiral nuclear effective field theory, where they serve as crucial input to determine the long-range part of the nucleon-nucleon potential as well as three-nucleon forces.

Correlation between the norm and the geometry of minimal networks

NASA Astrophysics Data System (ADS)

Laut, I. L.

2017-05-01

The paper is concerned with the inverse problem of the minimal Steiner network problem in a normed linear space. Namely, given a normed space in which all minimal networks are known for any finite point set, the problem is to describe all the norms on this space for which the minimal networks are the same as for the original norm. We survey the available results and prove that in the plane a rotund differentiable norm determines a distinctive set of minimal Steiner networks. In a two-dimensional space with rotund differentiable norm the coordinates of interior vertices of a nondegenerate minimal parametric network are shown to vary continuously under small deformations of the boundary set, and the turn direction of the network is determined. Bibliography: 15 titles.

48 CFR 52.247-61 - F.o.b. Origin-Minimum Size of Shipments.

Code of Federal Regulations, 2011 CFR

2011-10-01

... be the highest applicable minimum weight which will result in the lowest freight rate (or per car... minimum weight, the Contractor agrees to ship such scheduled quantity in one shipment. The Contractor...

48 CFR 52.247-61 - F.o.b. Origin-Minimum Size of Shipments.

Code of Federal Regulations, 2013 CFR

2013-10-01

... be the highest applicable minimum weight which will result in the lowest freight rate (or per car... minimum weight, the Contractor agrees to ship such scheduled quantity in one shipment. The Contractor...

48 CFR 52.247-61 - F.o.b. Origin-Minimum Size of Shipments.

Code of Federal Regulations, 2014 CFR

2014-10-01

... be the highest applicable minimum weight which will result in the lowest freight rate (or per car... minimum weight, the Contractor agrees to ship such scheduled quantity in one shipment. The Contractor...

48 CFR 52.247-61 - F.o.b. Origin-Minimum Size of Shipments.

Code of Federal Regulations, 2012 CFR

2012-10-01

... be the highest applicable minimum weight which will result in the lowest freight rate (or per car... minimum weight, the Contractor agrees to ship such scheduled quantity in one shipment. The Contractor...

Minimum Covers of Fixed Cardinality in Weighted Graphs.

ERIC Educational Resources Information Center

White, Lee J.

Reported is the result of research on combinatorial and algorithmic techniques for information processing. A method is discussed for obtaining minimum covers of specified cardinality from a given weighted graph. By the indicated method, it is shown that the family of minimum covers of varying cardinality is related to the minimum spanning tree of…

Minimal model of a cell connecting amoebic motion and adaptive transport networks.

PubMed

Gunji, Yukio-Pegio; Shirakawa, Tomohiro; Niizato, Takayuki; Haruna, Taichi

2008-08-21

A cell is a minimal self-sustaining system that can move and compute. Previous work has shown that a unicellular slime mold, Physarum, can be utilized as a biological computer based on cytoplasmic flow encapsulated by a membrane. Although the interplay between the modification of the boundary of a cell and the cytoplasmic flow surrounded by the boundary plays a key role in Physarum computing, no model of a cell has been developed to describe this interplay. Here we propose a toy model of a cell that shows amoebic motion and can solve a maze, Steiner minimum tree problem and a spanning tree problem. Only by assuming that cytoplasm is hardened after passing external matter (or softened part) through a cell, the shape of the cell and the cytoplasmic flow can be changed. Without cytoplasm hardening, a cell is easily destroyed. This suggests that cytoplasmic hardening and/or sol-gel transformation caused by external perturbation can keep a cell in a critical state leading to a wide variety of shapes and motion.

Design and fabrication of a boron reinforced intertank skirt

NASA Technical Reports Server (NTRS)

Henshaw, J.; Roy, P. A.; Pylypetz, P.

1974-01-01

Analytical and experimental studies were performed to evaluate the structural efficiency of a boron reinforced shell, where the medium of reinforcement consists of hollow aluminum extrusions infiltrated with boron epoxy. Studies were completed for the design of a one-half scale minimum weight shell using boron reinforced stringers and boron reinforced rings. Parametric and iterative studies were completed for the design of minimum weight stringers, rings, shells without rings and shells with rings. Computer studies were completed for the final evaluation of a minimum weight shell using highly buckled minimum gage skin. The detail design is described of a practical minimum weight test shell which demonstrates a weight savings of 30% as compared to an all aluminum longitudinal stiffened shell. Sub-element tests were conducted on representative segments of the compression surface at maximum stress and also on segments of the load transfer joint. A 10 foot long, 77 inch diameter shell was fabricated from the design and delivered for further testing.

76 FR 6500 - Self-Regulatory Organizations; Financial Industry Regulatory Authority, Inc.; Notice of Filing of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-02-04

... Haigney comment, Sutherland comment, Black and Gross comment, Berg comment, PIABA comment; St. John's..., Steiner comment, Chalmers comment, Gladden comment, Estell comment, Sutherland comment, Furgison comment...

Fluoride bioaccumulation by hydroponic cultures of camellia (Camellia japonica spp.) and sugar cane (Saccharum officinarum spp.).

PubMed

Camarena-Rangel, Nancy; Rojas Velázquez, Angel Natanael; Santos-Díaz, María del Socorro

2015-10-01

The ability of hydroponic cultures of camellia and sugar cane adult plants to remove fluoride was investigated. Plants were grown in a 50% Steiner nutrient solution. After an adaptation period to hydroponic conditions, plants were exposed to different fluoride concentrations (0, 2.5, 5 and 10 mg L(-1)). Fluoride concentration in the culture medium and in tissues was measured. In sugar cane, fluoride was mainly located in roots, with 86% of it absorbed and 14% adsorbed. Sugar cane plants removed 1000-1200 mg fluoride kg(-1) dry weight. In camellia plants the highest fluoride concentration was found in leaf. Roots accumulated fluoride mainly through absorption, which was 2-5 times higher than adsorption. At the end of the experiment, fluoride accumulation in camellia plants was 1000-1400 mgk g(-1) dry weight. Estimated concentration factors revealed that fluoride bioaccumulation is 74-221-fold in camellia plants and 100-500-fold in sugar cane plants. Thus, the latter appear as a suitable candidate for removing fluoride from water due to their bioaccumulation capacity and vigorous growth rate; therefore, sugar cane might be used for phytoremediation. Copyright © 2015 Elsevier Ltd. All rights reserved.

Owen Chamberlain, the Antiproton, and Polarized Targets

Science.gov Websites

allowed us to test the symmetry principles underlying the physics," [colleague Herbert Steiner] said . Symmetry principles state, for example, that some interactions look the same when reflected in a mirror or

Genetics Home Reference: spondylocarpotarsal synostosis syndrome

MedlinePlus

... active (expressed) in the cell membranes of cartilage-forming cells (chondrocytes). Cartilage is a tough, flexible tissue ... D, Shapiro SS, Takafuta T, Aftimos S, Kim CA, Firth H, Steiner CE, Cormier-Daire V, Superti-Furga A, ...

The Austrian Approach: Entering the World of Children.

ERIC Educational Resources Information Center

Feistritzer, Patricia; Balcerack, Carl

1979-01-01

This photo-essay describes a Waldorf School. Developed by Austrian Rudolf Steiner, the Waldorf plan is dedicated to allowing the child a childlike environment. It emphasizes storytelling, creative dramatics, flexibility, improvisation, crafts, and movement. (SJL)

Logrank Test and Interval Overlap Test for Bactericera cockerelli (Hemiptera: Triozidae) Under Different Fertilization Treatments for 7705 Tomato Hybrid

PubMed Central

Vargas-Madríz, Haidel; Bautista-Martínez, Néstor; Vera-Graziano, Jorge; Sánchez-García, Prometeo; García-Gutiérrez, Cipriano; Sánchez-Soto, Saúl; de Jesús García-Avila, Clemente

2014-01-01

Abstract It is known that some nutrients can have both negative and positive effects on some populations of insects. To test this, the Logrank test and the Interval Overlap Test were evaluated for two crop cycles (February–May and May–August) of the 7705 tomato hybrid, and the effect on the psyllid, Bactericera cockerelli (Sulc.) (Hemiptera: Triozidae), was examined under greenhouse conditions. Tomato plants were in polythene bags and irrigated with the following solutions: T1—Steiner solution, T2—Steiner solution with nitrogen reduced to 25%, T3—Steiner solution with potassium reduced to 25%, and T4—Steiner solution with calcium reduced to 25%. In the Logrank test, a significant difference was found when comparing the survival parameters of B. cockerelli generated from the treatment cohorts: T1–T2; T1–T3; T1–T4; T2–T3; and T3–T4, while no significant differences were found in the T2–T4 comparison in the February–May cycle. In the May–August cycle, significant differences were found when comparing the survival parameters generated from the treatment cohorts: T1–T2; T1–T3; and T1–T4, while no significant differences were found in the T2–T3; T2–T4; and T3–T4 comparisons of survival parameters of B. cockerelli fed with the 7705 tomato hybrid. Also, the Interval Overlap Test was done on the treatment cohorts (T1, T2, T3, and T4) in the February–May and May–August cycles. T1 and T2 compare similarly in both cycles when feeding on the treatments up to 36 d. Similarly, in T1 and T3, the behavior of the insect is similar when feeding on the treatments up to 40 and 73 d, respectively. Comparisons T2–T3 and T2–T4 are similar when feeding on both treatments up to 42, 38 and 37, 63 d, respectively. Finally, the T3–T4 comparison was similar when feeding in both treatments up to 20 and 46 d, respectively. RESUMEN. Se sabe que algunos nutrientes pueden tener efectos tanto negativos como positivos en algunas poblaciones de insectos. Para probar esto se evaluó la prueba de rango logarítmico y la prueba de Overlap intervalo de dos ciclos de cultivo (febrero–mayo y mayo–agosto) del híbrido de tomate 7705 y el efecto sobre el psílido, Bactericera cockerelli (Sulc) (Hemiptera: Triozidae) fue examinado bajo condiciones de invernadero. Las plantas de tomate estaban en bolsas de polietileno y regadas con las siguientes soluciones: T1: Solución de Steiner, T2: solución de Steiner con Nitrógeno a 25%, T3: solución de Steiner con Potasio a 25% y T4: solución de Steiner con Calcio a 25%. En la prueba de Logrank se encontró diferencia significativa al comparar los parámetros de supervivencia que se generaron en las cohortes de los tratamientos, T1 – T2; T1 – T3; T1 – T4; T2 – T3 y T3 – T4. En la comparación de T2 – T4, no se encontraron diferencias significativas, entre los parámetros de supervivencia de B. cockerelli ; para el ciclo Mayo-Agosto, se encontró diferencia significativa al comparar los parámetros de supervivencia que se generaron en las cohortes de los tratamientos, T1 - T2; T1 – T3; T1 – T4; en las comparaciones de T2 – T3; T2 – T4; T3 – T4, no se encontraron diferencias significativas, entre los parámetros de supervivencia de B. cockerelli alimentados con el hibrido de tomate 7705. De igual manera se realizó la Prueba de Traslape de Intervalos para las cohortes de los tratamientos (T1, T2, T3 y T4) en los ciclos de Febrero-Mayo y de Mayo-Agosto, se puede observar que la comparación de T1 con T2, son similares cuando se alimenta en ambos tratamientos hasta los 36 días, respectivamente. De igual manera, en la comparación (T1 y T3), siendo similar cuando el insecto se alimenta en ambos tratamientos hasta los 40 y 37 días, respectivamente. Las comparaciones (T2 y T3) y (T2 y T4) es similar cuando se alimenta en ambos tratamientos hasta los (42, 38) y (37, 63) días, respectivamente. Finalmente, la comparación para (T3 y T4) fue similar cuando se alimenta en ambos tratamientos hasta los 20 y 46 días, respectivamente. PMID:25527579

High-Precision Determination of the Pion-Nucleon σ Term from Roy-Steiner Equations.

PubMed

Hoferichter, Martin; Ruiz de Elvira, Jacobo; Kubis, Bastian; Meißner, Ulf-G

2015-08-28

We present a determination of the pion-nucleon (πN) σ term σ_{πN} based on the Cheng-Dashen low-energy theorem (LET), taking advantage of the recent high-precision data from pionic atoms to pin down the πN scattering lengths as well as of constraints from analyticity, unitarity, and crossing symmetry in the form of Roy-Steiner equations to perform the extrapolation to the Cheng-Dashen point in a reliable manner. With isospin-violating corrections included both in the scattering lengths and the LET, we obtain σ_{πN}=(59.1±1.9±3.0)  MeV=(59.1±3.5)  MeV, where the first error refers to uncertainties in the πN amplitude and the second to the LET. Consequences for the scalar nucleon couplings relevant for the direct detection of dark matter are discussed.

High-Precision Determination of the Pion-Nucleon σ Term from Roy-Steiner Equations

NASA Astrophysics Data System (ADS)

Hoferichter, Martin; Ruiz de Elvira, Jacobo; Kubis, Bastian; Meißner, Ulf-G.

2015-08-01

We present a determination of the pion-nucleon (π N ) σ term σπ N based on the Cheng-Dashen low-energy theorem (LET), taking advantage of the recent high-precision data from pionic atoms to pin down the π N scattering lengths as well as of constraints from analyticity, unitarity, and crossing symmetry in the form of Roy-Steiner equations to perform the extrapolation to the Cheng-Dashen point in a reliable manner. With isospin-violating corrections included both in the scattering lengths and the LET, we obtain σπ N=(59.1 ±1.9 ±3.0 ) MeV =(59.1 ±3.5 ) MeV , where the first error refers to uncertainties in the π N amplitude and the second to the LET. Consequences for the scalar nucleon couplings relevant for the direct detection of dark matter are discussed.

Roy-Steiner equations for pion-nucleon scattering

NASA Astrophysics Data System (ADS)

Ditsche, C.; Hoferichter, M.; Kubis, B.; Meißner, U.-G.

2012-06-01

Starting from hyperbolic dispersion relations, we derive a closed system of Roy-Steiner equations for pion-nucleon scattering that respects analyticity, unitarity, and crossing symmetry. We work out analytically all kernel functions and unitarity relations required for the lowest partial waves. In order to suppress the dependence on the high energy regime we also consider once- and twice-subtracted versions of the equations, where we identify the subtraction constants with subthreshold parameters. Assuming Mandelstam analyticity we determine the maximal range of validity of these equations. As a first step towards the solution of the full system we cast the equations for the π π to overline N N partial waves into the form of a Muskhelishvili-Omnès problem with finite matching point, which we solve numerically in the single-channel approximation. We investigate in detail the role of individual contributions to our solutions and discuss some consequences for the spectral functions of the nucleon electromagnetic form factors.

40 CFR 180.960 - Polymers; exemptions from the requirement of a tolerance.

Code of Federal Regulations, 2012 CFR

2012-07-01

...-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six...) block copolymer; the minimum poly(oxypropylene) content is 27 moles and the minimum molecular weight (in... weight (in amu), 900,000 62386-95-2 Monophosphate ester of the block copolymer α-hydro-ω-hydroxypoly...

Fuzzy α-minimum spanning tree problem: definition and solutions

NASA Astrophysics Data System (ADS)

Zhou, Jian; Chen, Lu; Wang, Ke; Yang, Fan

2016-04-01

In this paper, the minimum spanning tree problem is investigated on the graph with fuzzy edge weights. The notion of fuzzy ? -minimum spanning tree is presented based on the credibility measure, and then the solutions of the fuzzy ? -minimum spanning tree problem are discussed under different assumptions. First, we respectively, assume that all the edge weights are triangular fuzzy numbers and trapezoidal fuzzy numbers and prove that the fuzzy ? -minimum spanning tree problem can be transformed to a classical problem on a crisp graph in these two cases, which can be solved by classical algorithms such as the Kruskal algorithm and the Prim algorithm in polynomial time. Subsequently, as for the case that the edge weights are general fuzzy numbers, a fuzzy simulation-based genetic algorithm using Prüfer number representation is designed for solving the fuzzy ? -minimum spanning tree problem. Some numerical examples are also provided for illustrating the effectiveness of the proposed solutions.

A Sharp methodology for VLSI layout

NASA Astrophysics Data System (ADS)

Bapat, Shekhar

1993-01-01

The layout problem for VLSI circuits is recognized as a very difficult problem and has been traditionally decomposed into the several seemingly independent sub-problems of placement, global routing, and detailed routing. Although this structure achieves a reduction in programming complexity, it is also typically accompanied by a reduction in solution quality. Most current placement research recognizes that the separation is artificial, and that the placement and routing problems should be solved ideally in tandem. We propose a new interconnection model, Sharp and an associated partitioning algorithm. The Sharp interconnection model uses a partitioning shape that roughly resembles the musical sharp 'number sign' and makes extensive use of pre-computed rectilinear Steiner trees. The model is designed to generate strategic routing information along with the partitioning results. Additionally, the Sharp model also generates estimates of the routing congestion. We also propose the Sharp layout heuristic that solves the layout problem in its entirety. The Sharp layout heuristic makes extensive use of the Sharp partitioning model. The use of precomputed Steiner tree forms enables the method to model accurately net characteristics. For example, the Steiner tree forms can model both the length of the net and more importantly its route. In fact, the tree forms are also appropriate for modeling the timing delays of nets. The Sharp heuristic works to minimize both the total layout area by minimizing total net length (thus reducing the total wiring area), and the congestion imbalances in the various channels (thus reducing the unused or wasted channel area). Our heuristic uses circuit element movements amongst the different partitioning blocks and selection of alternate minimal Steiner tree forms to achieve this goal. The objective function for the algorithm can be modified readily to include other important circuit constraints like propagation delays. The layout technique first computes a very high-level approximation of the layout solution (i.e., the positions of the circuit elements and the associated net routes). The approximate solution is alternately refined, objective function. The technique creates well defined sub-problems and offers intermediary steps that can be solved in parallel, as well as a parallel mechanism to merge the sub-problem solutions.

Logrank test and Interval Overlap Test for Bactericera cockerelli (Hemiptera: Triozidae) under different fertilization treatments for 7705 tomato hybrid.

PubMed

Vargas-Madríz, Haidel; Bautista-Martínez, Néstor; Vera-Graziano, Jorge; Sánchez-García, Prometeo; García-Gutiérrez, Cipriano; Sánchez-Soto, Saúl; García-Avila, Clemente de Jesús

2014-01-01

It is known that some nutrients can have both negative and positive effects on some populations of insects. To test this, the Logrank test and the Interval Overlap Test were evaluated for two crop cycles (February-May and May-August) of the 7705 tomato hybrid, and the effect on the psyllid, Bactericera cockerelli (Sulc.) (Hemiptera: Triozidae), was examined under greenhouse conditions. Tomato plants were in polythene bags and irrigated with the following solutions: T1-Steiner solution, T2-Steiner solution with nitrogen reduced to 25%, T3-Steiner solution with potassium reduced to 25%, and T4-Steiner solution with calcium reduced to 25%. In the Logrank test, a significant difference was found when comparing the survival parameters of B. cockerelli generated from the treatment cohorts: T1-T2; T1-T3; T1-T4; T2-T3; and T3-T4, while no significant differences were found in the T2-T4 comparison in the February-May cycle. In the May-August cycle, significant differences were found when comparing the survival parameters generated from the treatment cohorts: T1-T2; T1-T3; and T1-T4, while no significant differences were found in the T2-T3; T2-T4; and T3-T4 comparisons of survival parameters of B. cockerelli fed with the 7705 tomato hybrid. Also, the Interval Overlap Test was done on the treatment cohorts (T1, T2, T3, and T4) in the February-May and May-August cycles. T1 and T2 compare similarly in both cycles when feeding on the treatments up to 36 d. Similarly, in T1 and T3, the behavior of the insect is similar when feeding on the treatments up to 40 and 73 d, respectively. Comparisons T2-T3 and T2-T4 are similar when feeding on both treatments up to 42, 38 and 37, 63 d, respectively. Finally, the T3-T4 comparison was similar when feeding in both treatments up to 20 and 46 d, respectively. © The Author 2014. Published by Oxford University Press on behalf of the Entomological Society of America.

Military Periodicals.

DTIC Science & Technology

1983-05-01

4401 Vine Grove Road Fort Knox, Kentucky 40121 Telephone: (502) 942-8624 Editor-in-Chief: MAJ C. R. Steiner , Jr. $10.00 Army (M) Association...Wehrkunde) Verlag Europaische Wehrkunde Gmb H Herzog- Rudolf -Str. 1 8000 Munich 22 West Germany Telephone: (089) 293883 Editor: Ewald Heinrich von

Computer simulations of optimum boost and buck-boost converters

NASA Technical Reports Server (NTRS)

Rahman, S.

1982-01-01

The development of mathematicl models suitable for minimum weight boost and buck-boost converter designs are presented. The facility of an augumented Lagrangian (ALAG) multiplier-based nonlinear programming technique is demonstrated for minimum weight design optimizations of boost and buck-boost power converters. ALAG-based computer simulation results for those two minimum weight designs are discussed. Certain important features of ALAG are presented in the framework of a comprehensive design example for boost and buck-boost power converter design optimization. The study provides refreshing design insight of power converters and presents such information as weight annd loss profiles of various semiconductor components and magnetics as a function of the switching frequency.

Ensemble Weight Enumerators for Protograph LDPC Codes

NASA Technical Reports Server (NTRS)

Divsalar, Dariush

2006-01-01

Recently LDPC codes with projected graph, or protograph structures have been proposed. In this paper, finite length ensemble weight enumerators for LDPC codes with protograph structures are obtained. Asymptotic results are derived as the block size goes to infinity. In particular we are interested in obtaining ensemble average weight enumerators for protograph LDPC codes which have minimum distance that grows linearly with block size. As with irregular ensembles, linear minimum distance property is sensitive to the proportion of degree-2 variable nodes. In this paper the derived results on ensemble weight enumerators show that linear minimum distance condition on degree distribution of unstructured irregular LDPC codes is a sufficient but not a necessary condition for protograph LDPC codes.

Weight compensation characteristics of Armeo®Spring exoskeleton: implications for clinical practice and research.

PubMed

Perry, Bonnie E; Evans, Emily K; Stokic, Dobrivoje S

2017-02-17

Armeo®Spring exoskeleton is widely used for upper extremity rehabilitation; however, weight compensation provided by the device appears insufficiently characterized to fully utilize it in clinical and research settings. Weight compensation was quantified by measuring static force in the sagittal plane with a load cell attached to the elbow joint of Armeo®Spring. All upper spring settings were examined in 5° increments at the minimum, maximum, and two intermediate upper and lower module length settings, while keeping the lower spring at minimum. The same measurements were made for minimum upper spring setting and maximum lower spring setting at minimum and maximum module lengths. Weight compensation was plotted against upper module angles, and slope was analyzed for each condition. The Armeo®Spring design prompted defining the slack angle and exoskeleton balance angle, which, depending on spring and length settings, divide the operating range into different unloading and loading regions. Higher spring tensions and shorter module lengths provided greater unloading (≤6.32 kg of support). Weight compensation slope decreased faster with shorter length settings (minimum length = -0.082 ± 0.002 kg/°; maximum length = -0.046 ± 0.001 kg/°) independent of spring settings. Understanding the impact of different settings on the Armeo®Spring weight compensation should help define best clinical practice and improve fidelity of research.

Parenting as a Vocation: Lifelong Learning Can Begin in the Home.

ERIC Educational Resources Information Center

Stehlik, Tom

2003-01-01

Reviews theories of adult learning over the lifespan grounded in anthroposophy, the philosophy of Rudolf Steiner's Waldorf Schools. Examines parenting as a vocation through this perspective and the implications for the learning needs of parents. (Contains 35 references.) (SK)

Number of minimum-weight code words in a product code

NASA Technical Reports Server (NTRS)

Miller, R. L.

1978-01-01

Consideration is given to the number of minimum-weight code words in a product code. The code is considered as a tensor product of linear codes over a finite field. Complete theorems and proofs are presented.

Preliminary structural design of composite main rotor blades for minimum weight

NASA Technical Reports Server (NTRS)

Nixon, Mark W.

1987-01-01

A methodology is developed to perform minimum weight structural design for composite or metallic main rotor blades subject to aerodynamic performance, material strength, autorotation, and frequency constraints. The constraints and load cases are developed such that the final preliminary rotor design will satisfy U.S. Army military specifications, as well as take advantage of the versatility of composite materials. A minimum weight design is first developed subject to satisfying the aerodynamic performance, strength, and autorotation constraints for all static load cases. The minimum weight design is then dynamically tuned to avoid resonant frequencies occurring at the design rotor speed. With this methodology, three rotor blade designs were developed based on the geometry of the UH-60A Black Hawk titanium-spar rotor blade. The first design is of a single titanium-spar cross section, which is compared with the UH-60A Black Hawk rotor blade. The second and third designs use single and multiple graphite/epoxy-spar cross sections. These are compared with the titanium-spar design to demonstrate weight savings from use of this design methodology in conjunction with advanced composite materials.

Directions in Rehabilitation Counseling, 2001.

ERIC Educational Resources Information Center

Flach, Frederic, Ed.

2001-01-01

This volume of 12 lessons provides expert information on a variety of medical and psychological issues in rehabilitative counseling. The lessons, which may be applied toward continuing education credits, are: (1) "Integration of Psychiatric Treatment and Rehabilitation" (Jeanne Steiner, Larry Davidson, Michael A. Hoge, and Selby Jacobs);…

Teacher Training in Curative Education.

ERIC Educational Resources Information Center

Juul, Kristen D.; Maier, Manfred

1992-01-01

This article considers the application of the philosophical and educational principles of Rudolf Steiner, called "anthroposophy," to the training of teachers and curative educators in the Waldorf schools. Special emphasis is on the Camphill movement which focuses on therapeutic schools and communities for children with special needs. (DB)

Performance of a cavity-method-based algorithm for the prize-collecting Steiner tree problem on graphs

NASA Astrophysics Data System (ADS)

Biazzo, Indaco; Braunstein, Alfredo; Zecchina, Riccardo

2012-08-01

We study the behavior of an algorithm derived from the cavity method for the prize-collecting steiner tree (PCST) problem on graphs. The algorithm is based on the zero temperature limit of the cavity equations and as such is formally simple (a fixed point equation resolved by iteration) and distributed (parallelizable). We provide a detailed comparison with state-of-the-art algorithms on a wide range of existing benchmarks, networks, and random graphs. Specifically, we consider an enhanced derivative of the Goemans-Williamson heuristics and the dhea solver, a branch and cut integer linear programming based approach. The comparison shows that the cavity algorithm outperforms the two algorithms in most large instances both in running time and quality of the solution. Finally we prove a few optimality properties of the solutions provided by our algorithm, including optimality under the two postprocessing procedures defined in the Goemans-Williamson derivative and global optimality in some limit cases.

Comparative assessment of four Steinernematidae and three Heterorhabditidae species for infectivity of larval Diabrotica virgifera virgifera

USDA-ARS?s Scientific Manuscript database

Larval Diabrotica virgifera virgifera LeConte were exposed to seven different entomopathogenic nematode species to test their potential infectivity in a laboratory setting. Known D. virgifera infecting nematode species Heterorhabditis bacteriophora Poinar, H. megidis Poinar, Jackson & Klein, Steiner...

Faculty Involvement in Administration of Schools.

ERIC Educational Resources Information Center

Ogletree, Earl J.; Schmidt, Linda J.

1992-01-01

Contrasts the faculty-led administration of the Waldorf Schools founded by R. Steiner with the administration by local school councils established in the Chicago (Illinois) Public Schools through the School Reform Act. In Chicago, morale and status of teachers can be improved by increasing their administrative partnership. (SLD)

The Nature of Imagination in Education for Sustainability

ERIC Educational Resources Information Center

Jensen, Sally

2015-01-01

The importance of imagination in education has a significant history (Egan, 1986, 2001; Eisner, 1976; Greene, 1988; Steiner, 1954; Warnock, 1976); however, scholarship is often theoretical, and the involvement of imagination in understanding sustainability is often overlooked (Jones, 1995; Judson, 2010; Stewart, 2009). Imagination has rarely been…

[Visualisation methods for etheric formative forces].

PubMed

Burkhard, B; Kittel, R

2009-09-01

Rudolf Steiner, the founder of anthroposophy, suggested the development of visualisation methods for "etheric formative forces". The essential methods, their "spiritual scientific" basis and indications are described and their claims critically tested. The methods are not validated, the key criteria for diagnostic tests (reproducibility, sensitivity, specifity) are not given.

The Common Vision. Reviews: Books.

ERIC Educational Resources Information Center

Chattin-McNichols, John

1998-01-01

Reviews Marshak's book describing the work of educators Maria Montessori, Rudolf Steiner, Aurobindo Ghose, and Inayat Khan. Maintains that the book gives clear, concise information on each educator and presents a common vision for children and their education; also maintains that it gives theoretical and practical information and discusses…

Superresolution SAR Imaging Algorithm Based on Mvm and Weighted Norm Extrapolation

NASA Astrophysics Data System (ADS)

Zhang, P.; Chen, Q.; Li, Z.; Tang, Z.; Liu, J.; Zhao, L.

2013-08-01

In this paper, we present an extrapolation approach, which uses minimum weighted norm constraint and minimum variance spectrum estimation, for improving synthetic aperture radar (SAR) resolution. Minimum variance method is a robust high resolution method to estimate spectrum. Based on the theory of SAR imaging, the signal model of SAR imagery is analyzed to be feasible for using data extrapolation methods to improve the resolution of SAR image. The method is used to extrapolate the efficient bandwidth in phase history field and better results are obtained compared with adaptive weighted norm extrapolation (AWNE) method and traditional imaging method using simulated data and actual measured data.

21 CFR 177.1680 - Polyurethane resins.

Code of Federal Regulations, 2012 CFR

2012-04-01

...′,α″-1,2,3-Propanetriyltris [omega-hydroxypoly (oxypropylene) (15-18 moles)], average molecular weight 3,000. Propylene glycol. α,α′,α″-[Propylidynetris (methylene)] tris [omega-hydroxypoly (oxypropylene) (minimum 1.5 moles)], minimum molecular weight 400. α-[ρ(1,1,3,3-Tetramethylbutyl) - phenyl]-omega...

21 CFR 177.1680 - Polyurethane resins.

Code of Federal Regulations, 2011 CFR

2011-04-01

...′,α″-1,2,3-Propanetriyltris [omega-hydroxypoly (oxypropylene) (15-18 moles)], average molecular weight 3,000. Propylene glycol. α,α′,α″-[Propylidynetris (methylene)] tris [omega-hydroxypoly (oxypropylene) (minimum 1.5 moles)], minimum molecular weight 400. α-[ρ(1,1,3,3-Tetramethylbutyl) - phenyl]-omega...

21 CFR 177.1680 - Polyurethane resins.

Code of Federal Regulations, 2010 CFR

2010-04-01

...′,α″-1,2,3-Propanetriyltris [omega-hydroxypoly (oxypropylene) (15-18 moles)], average molecular weight 3,000. Propylene glycol. α,α′,α″-[Propylidynetris (methylene)] tris [omega-hydroxypoly (oxypropylene) (minimum 1.5 moles)], minimum molecular weight 400. α-[ρ(1,1,3,3-Tetramethylbutyl) - phenyl]-omega...

21 CFR 177.1680 - Polyurethane resins.

Code of Federal Regulations, 2013 CFR

2013-04-01

...′,α″-1,2,3-Propanetriyltris [omega-hydroxypoly (oxypropylene) (15-18 moles)], average molecular weight 3,000. Propylene glycol. α,α′,α″-[Propylidynetris (methylene)] tris [omega-hydroxypoly (oxypropylene) (minimum 1.5 moles)], minimum molecular weight 400. α-[ρ(1,1,3,3-Tetramethylbutyl) - phenyl]-omega...

Aesthetic Discourses in Early Childhood Settings: Dewey, Steiner, and Vygotsky

ERIC Educational Resources Information Center

Lim, Booyeun

2004-01-01

Early childhood, when young children are already capable of undergoing aesthetic experience, must be the starting point for aesthetic education. Despite increasing attention to the significant values of the arts in early childhood classrooms, no theoretical framework to support aesthetic education has been established. This article introduces the…

Alternative Education for the 21st Century: Philosophies, Approaches, Visions

ERIC Educational Resources Information Center

Woods, Philip A., Ed.; Woods, Glenys J., Ed.

2008-01-01

This is a unique collection of leading examples of education grounded in alternative philosophies and cultures--from initiatives to create more democratic schools, through Quaker, Buddhist, Islamic, Montessori and Steiner/Waldorf schools, to Maori and First Nations education in Canada and Palestinian Jewish schools in Israel. Aimed at educational…

Democracy and Spiritual Awareness: Interconnections and Implications for Educational Leadership

ERIC Educational Resources Information Center

Woods, Glenys J.; Woods, Philip A.

2008-01-01

This article sets out theorisations of developmental democracy and spiritual awareness formulated in previous work by the authors. These are used to explore collegial leadership in a case study Steiner school, with the aim of illuminating and illustrating the transformative demands of developmental democracy and its interconnection with spiritual…

The Future of Literacy.

ERIC Educational Resources Information Center

Disch, Robert, Ed.

A variety of contributors explore the implications and the historical background of the future of literacy. We have inherited a belief that a vital literary tradition can uphold humane values, but events of twentieth century history have completely undermined faith in literacy as a stronghold of humanism. George Steiner suggests that literature is…

Towards a Pedagogy of Imagination: A Phenomenological Case Study of Holistic Education

ERIC Educational Resources Information Center

Nielsen, Thomas William

2006-01-01

This article offers a synthesis of my recently completed doctorate study of Rudolf Steiner's notion of imaginative teaching. Seven original imaginative teaching methods (drama, exploration, storytelling, routine, arts, discussion and empathy) are introduced via phenomenological moments, followed by analysis and discussion. The article concludes…

Expression and Activation of STAT Transcription Factors in Breast Cancer

DTIC Science & Technology

1998-05-08

clinicians. J~, 273: 577-585, 1995. 183 Hundertmark 5, Buhler H, Rudolf M, Weitzel HK, Ragosch V: Inhibition of 11 beta-hydroxysteroid dehydrogenase...activated protein kinase through a Jakl-dependent pathway. Mol. Cell. Bioi., 17:3833-40, 1997. Stewart JF, Rubens RO, King RJ, Minton MJ, Steiner R

International Survey of the Status of Waldorf Schools.

ERIC Educational Resources Information Center

Ogletree, Earl J.

This international survey study was the first to examine the Waldorf School movement worldwide and focused on the teaching practices, curricula, educational outcomes, and positive program features of Waldorf schools, as well as problems encountered by Waldorf staff. The role of Rudolf Steiner's philosophy, anthroposophy, and its esoteric aspects…

"The City": The Rhetoric of Rhythm.

ERIC Educational Resources Information Center

Medhurst, Martin J.; Benson, Thomas W.

1981-01-01

Case study of Ralph Steiner and Willard Van Dyke's classic documentary, "The City," a work of cinematic art and a record of the problems confronting urban planners. Discusses how the film builds a rhythmic pattern through dramatic structure, image content and composition, editing, music, and narration to enhance its rhetorical appeal. (JMF)

Modern Optimization Methods in Minimum Weight Design of Elastic Annular Rotating Disk with Variable Thickness

NASA Astrophysics Data System (ADS)

Jafari, S.; Hojjati, M. H.

2011-12-01

Rotating disks work mostly at high angular velocity and this results a large centrifugal force and consequently induce large stresses and deformations. Minimizing weight of such disks yields to benefits such as low dead weights and lower costs. This paper aims at finding an optimal disk thickness profile for minimum weight design using the simulated annealing (SA) and particle swarm optimization (PSO) as two modern optimization techniques. In using semi-analytical the radial domain of the disk is divided into some virtual sub-domains as rings where the weight of each rings must be minimized. Inequality constrain equation used in optimization is to make sure that maximum von Mises stress is always less than yielding strength of the material of the disk and rotating disk does not fail. The results show that the minimum weight obtained for all two methods is almost identical. The PSO method gives a profile with slightly less weight (6.9% less than SA) while the implementation of both PSO and SA methods are easy and provide more flexibility compared with classical methods.

21 CFR 177.1680 - Polyurethane resins.

Code of Federal Regulations, 2014 CFR

2014-04-01

...′-(Isopropylidenedi-p-phenylene)bis[omega-hydroxypoly (oxy-pro-pylene)(3-4 moles)], average molecular weight 675... propylene oxide). Polypropylene glycol. α,α′,α″-1,2,3-Propanetriyltris [omega-hydroxypoly (oxypropylene) (15...)] tris [omega-hydroxypoly (oxypropylene) (minimum 1.5 moles)], minimum molecular weight 400. α-[ρ(1,1,3,3...

Effect of Weight Transfer on a Vehicle's Stopping Distance.

ERIC Educational Resources Information Center

Whitmire, Daniel P.; Alleman, Timothy J.

1979-01-01

An analysis of the minimum stopping distance problem is presented taking into account the effect of weight transfer on nonskidding vehicles and front- or rear-wheels-skidding vehicles. Expressions for the minimum stopping distances are given in terms of vehicle geometry and the coefficients of friction. (Author/BB)

21 CFR 177.1440 - 4,4′-Isopropylidenediphenol-epichlorohydrin resins minimum molecular weight 10,000.

Code of Federal Regulations, 2013 CFR

2013-04-01

...) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.1440 4,4′-Isopropylidenediphenol-epichlorohydrin resins minimum molecular weight 10... may be safely used as articles or components of articles intended for use in producing, manufacturing...

21 CFR 177.1440 - 4,4′-Isopropylidenediphenol-epichlorohydrin resins minimum molecular weight 10,000.

Code of Federal Regulations, 2012 CFR

2012-04-01

...) INDIRECT FOOD ADDITIVES: POLYMERS Substances for Use as Basic Components of Single and Repeated Use Food Contact Surfaces § 177.1440 4,4′-Isopropylidenediphenol-epichlorohydrin resins minimum molecular weight 10... may be safely used as articles or components of articles intended for use in producing, manufacturing...

75 FR 168 - Self-Regulatory Organizations; NYSE Arca, Inc.; Order Approving Proposed Rule Change Amending...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-04

... lower the minimum component stock weight requirement from 90% to 70% of the weight of the underlying... component stock trading volumes are determined on a global basis. Finally, as an option for meeting the... minimize potential manipulation. The Commission also believes that the proposed use of minimum notional...

Calibration of the Permo-Triassic Magnetostratigraphic Time Scale: Constraints from the Dewey Lake Formation, West Texas

NASA Astrophysics Data System (ADS)

Chang, S.; Knight, K. B.; Renne, P. R.

2005-12-01

Magnetostratigraphy is potentially a powerful tool for deciphering the high resolution chronostratigraphy of events across the Permo-Triassic boundary, but few well-dated polarity reversals exist to serve as calibration. Red beds of the Dewey Lake Formation (DLF) of West Texas span three reversed polarity intervals (Steiner, 2001) in a section of the DLF at Caprock Canyons State Park, where two tuffs occur. Sanidine separated from these tuffs was analyzed by 40Ar/39Ar methods. Single crystal laser fusion 40Ar/39Ar analyses of 40 grains from the upper tuff yield a weighted mean age of 249.9 ± 2.4 Ma (2σ errors here and throughout). The clustering of single crystal data provides some assurance against xenocrystic contamination. Two age spectra from multigrain sanidine separates from the lower tuff yielded integrated ages of 248.9 ± 2.8 Ma and 249.7 ± 2.8 Ma and consistent plateau ages of 249.2 ± 2.4 Ma and 249.6 ± 2.4 Ma. Two age spectra from multigrain upper tuff sanidines lack strict plateaus but with overall flat age spectra, with integrated ages of 249.7 ± 2.8 Ma and 250.3 ± 2.8 Ma and plateau-like segments (>70% of 39Ar released) with ages of 249.9 ± 2.6 Ma and 249.9 ± 2.6 Ma, respectively. These results, compared with 40Ar/39Ar data (using the same FCs = 28.02 Ma standard calibration) from the GSSP section at Meishan, China, suggest that the Permo-Triassic boundary (249.8 Ma; recalculated from Renne et al., 1995) definitely occurs within the lower Dewey Lake Formation. The two tuffs, which bracket a normal to reverse geomagnetic polarity transition polarity (Steiner, 2001), have indistinguishable ages. The age of this Permo-Triassic polarity transition is thus best represented by the weighed average of their ages, ca. 249.7 Ma (based on accepted calibrations of the 40Ar/39Ar system). Further such constraints will facilitate high-resolution comparison of terrestrial and marine records across this critical time interval.

14 CFR 27.49 - Performance at minimum operating speed.

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Performance at minimum operating speed. 27... minimum operating speed. (a) For helicopters— (1) The hovering ceiling must be determined over the ranges... climb at the minimum operating speed must be determined over the ranges of weight, altitude, and...

14 CFR 27.49 - Performance at minimum operating speed.

Code of Federal Regulations, 2011 CFR

2011-01-01

... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Performance at minimum operating speed. 27... minimum operating speed. (a) For helicopters— (1) The hovering ceiling must be determined over the ranges... climb at the minimum operating speed must be determined over the ranges of weight, altitude, and...

Axisymmetric inlet minimum weight design method

NASA Technical Reports Server (NTRS)

Nadell, Shari-Beth

1995-01-01

An analytical method for determining the minimum weight design of an axisymmetric supersonic inlet has been developed. The goal of this method development project was to improve the ability to predict the weight of high-speed inlets in conceptual and preliminary design. The initial model was developed using information that was available from inlet conceptual design tools (e.g., the inlet internal and external geometries and pressure distributions). Stiffened shell construction was assumed. Mass properties were computed by analyzing a parametric cubic curve representation of the inlet geometry. Design loads and stresses were developed at analysis stations along the length of the inlet. The equivalent minimum structural thicknesses for both shell and frame structures required to support the maximum loads produced by various load conditions were then determined. Preliminary results indicated that inlet hammershock pressures produced the critical design load condition for a significant portion of the inlet. By improving the accuracy of inlet weight predictions, the method will improve the fidelity of propulsion and vehicle design studies and increase the accuracy of weight versus cost studies.

High d(+)-fructose diet adversely affects testicular weight gain in weaning rats─protection by moderate d(+)-glucose diet.

PubMed

Shibata, Katsumi; Fukuwatari, Tsutomu

2013-01-01

The use of high D(+)-fructose corn syrup has increased over the past several decades in the developed countries, while overweight and obesity rates and the related diseases have risen dramatically. However, we found that feeding a high D(+)-fructose diet (80% D(+)-fructose as part of the diet) to weaning rats for 21 days led to reduced food intake (50% less, P < 0.0001) and thus delayed the weight gains in the body (40% less, P < 0.0001) and testes (40% less, P < 0.0001) compared to the no D(+)-fructose diet. We also challenged a minimum requirement of dietary D(+)-glucose for preventing the adverse effects of D(+)-fructose, such as lower food intake and reduction of body weight and testicular weight; the minimum requirement of D(+)-glucose was ≈23% of the diet. This glucose amount may be the minimum requirement of exogenous glucose for reducing weight gain.

The Big Disconnect: Your Student in Class vs. Your Student Online

ERIC Educational Resources Information Center

Steiner-Adair, Catherine

2015-01-01

Catherine Steiner-Adair, clinical psychologist, has consulted for more than 350 independent and public schools, parents, and students, on a wide range of topics related to strengthening children's social and emotional development, shaping school culture, and deepening parents' connections to their children. Four years ago, she was able to collect…

Homer: A Collection of Critical Essays. Twentieth Century Views Series.

ERIC Educational Resources Information Center

Steiner, George, Ed.; Fagles, Robert, Ed.

One of a series of works aimed at presenting contemporary critical opinion on major authors, this collection includes essays by George Steiner, Leo Tolstoy, Ezra Pound, Erich Auerbach, Edwin Muir, Cedric H. Whitman, Albert B. Lord, W. H. Auden, Ernst Bloch, Georg Lukacs, C. Day Lewis, Gabriel Germain, Franz Kafka, Rachel Bespaloff, Robert…

Unbiased Causal Inference from an Observational Study: Results of a Within-Study Comparison

ERIC Educational Resources Information Center

Pohl, Steffi; Steiner, Peter M.; Eisermann, Jens; Soellner, Renate; Cook, Thomas D.

2009-01-01

Adjustment methods such as propensity scores and analysis of covariance are often used for estimating treatment effects in nonexperimental data. Shadish, Clark, and Steiner used a within-study comparison to test how well these adjustments work in practice. They randomly assigned participating students to a randomized or nonrandomized experiment.…

Mimogonellus dreybrodti sp. n., a new cave-inhabiting Osoriinae from Laos (Coleoptera: Staphylinidae).

PubMed

Yin, Zi-Wei; Steiner, Helmut

2017-10-17

A new osoriine species, Mimogonellus dreybrodti Yin & Steiner, sp. n., collected from a cave in Houaphanh Province, Laos, is described and illustrated. This represents the third Mimogonellus species in Asia, and the first in the genus known to inhabit a cave environment.

Creating Relational Spaces: Everyday Spirituality in Early Childhood Settings

ERIC Educational Resources Information Center

Bone, Jane

2008-01-01

This research addressed the question of how the spiritual experience of young children might be supported in early childhood educational settings. Qualitative case study research took place in three different contexts: a Montessori casa, a Rudolf Steiner kindergarten and a private preschool. Children aged 2 1/2-6 years, their parents and teachers…

Politics of Externalization in Reflexive Times: Reinventing Japanese Education Reform Discourses through "Finnish PISA Success"

ERIC Educational Resources Information Center

Takayama, Keita

2010-01-01

Drawing on a critical theoretical paradigm and critically engaging with the externalization thesis that Gita Steiner-Khamsi and Jurgen Schriewer have developed, this article examines the politics of "Finnish education" in the ongoing Japanese education reform debate. More specifically, it examines the various discursive uses of…

Student Adjustment to Higher Education: The Role of Alternative Educational Pathways in Coping with the Demands of Student Life

ERIC Educational Resources Information Center

Shankland, Rebecca; Genolini, Christophe; Franca, Lionel Riou; Guelfi, Julien-Daniel; Ionescu, Serban

2010-01-01

The present longitudinal study measured student adjustment to higher education, comparing 50 participants from alternative schools (Steiner, Montessori, New Schools) with 80 students from the traditional school system. We hypothesized that students from alternative schools adapt better, because of greater perceived social support, academic…

Peer Inquiry: Discovering What You Know through Dialogue

ERIC Educational Resources Information Center

Wix, Linney; John-Steiner, Vera

2008-01-01

The article discusses a dialogical peer inquiry process as a practice of co-constructing knowledge in graduate coursework. The process, formerly structured as an exam, was developed by Dr. Vera John-Steiner more than 30 years ago and has been implemented in adapted forms by her students in their teaching. The dialogical peer inquiry process…

THE INTERNATIONAL WALDORF SCHOOL MOVEMENT.

ERIC Educational Resources Information Center

VON BARAVALLE, HERMANN

AN HISTORICAL REVIEW OF THE WALDORF SCHOOL PLAN TRACES THE MOVEMENT FROM ITS FOUNDING IN STUTTGART, GERMANY IN 1919, BY THE WALDORF ASTORIA COMPANY AND UNDER THE DIRECTION OF RUDOLF STEINER, TO ITS INTRODUCTION INTO SWITZERLAND, OTHER EUROPEAN COUNTRIES, THE AMERICAS, AUSTRALIA, NEW ZEALAND, AND SOUTH AFRICA, A TOTAL OF 175 SCHOOLS AS OF 1963. THE…

Learning That Grows with the Learner: An Introduction to Waldorf Education.

ERIC Educational Resources Information Center

Barnes, Henry

1991-01-01

Waldorf education, rooted in the spiritual-scientific research of the Austrian scientist Rudolf Steiner, conceives man/woman as a three-fold being of spirit, soul, and body whose capacities unfold in three developmental stages: early childhood, middle childhood, and adolescence. Waldorf schools educate the whole human being--head, heart, and…

Wind Shear Modeling for Aircraft Hazard Definition

DTIC Science & Technology

1977-03-01

Fichtl, "Rough to Smooth Transition of an Equilibrium Neutral Constant Stress Layer," NASA TM X-3322, (1975). 5-36 Geiger, Rudolf , The Climate Near the...Roy Steiner , and K. G. Pratt. "Dynamic Response of Airplanes to Atmospheric Turbulence Including Flight Data on Input and Response," NASA TR R-199

A Note on Time and Education.

ERIC Educational Resources Information Center

Leichter, Hope Jensen

1980-01-01

The temporal organization of the Rudolf Steiner School in New York City is examined in terms of daily or microtime, calendric time, and developmental time. The question of continuities over time, that is, the interweaving of past, present, and future, and the relation of these continuities to the transformations of education are also considered.…

The Waldorf Curriculum as a Framework for Moral Education: One Dimension of a Fourfold System.

ERIC Educational Resources Information Center

Armon, Joan

This paper examines moral education as a holistic structure that evolves from the interplay between the educational applications of anthroposophy, students' developmental needs, the curriculum, as indicated by Rudolf Steiner, and teachers' roles in fashioning the curriculum. The methodology draws upon the qualitative research paradigm of…

Influence of alternative lifestyles on self-reported body weight and health characteristics in women.

PubMed

Simões-Wüst, Ana Paula; Kummeling, Ischa; Mommers, Monique; Huber, Machteld A S; Rist, Lukas; van de Vijver, Lucy P L; Dagnelie, Pieter C; Thijs, Carel

2014-04-01

Alternative lifestyles are often associated with distinct practices with respect to nutrition, physical activity, smoking, alcohol use and usage of complementary medicine. Evidence concerning effects of these lifestyle-related practices on health status is still fragmentary. To describe maternal health characteristics related to alternative lifestyles, with emphasis on body-weight status, during pregnancy and maternity periods. We compared self-reported health-related features of mothers with alternative lifestyles and conventional lifestyles during pregnancy and maternity period in the KOALA Birth Cohort Study. This cohort comprises two recruitment groups of mother-infant pairs, one with a conventional (no selection based on lifestyle, n = 2333), the other with an alternative lifestyle (selected via organic food shops, anthroposophic clinicians and midwives, anthroposophic under-five clinics, Rudolf Steiner schools and relevant magazines, n = 485). Mothers in the alternative group more frequently chose organic foods, adhered to specific living rules, practised vegetarianism and identified themselves with anthroposophy. Mothers in the alternative group showed lower BMI and lower prevalence of overweight and obesity than the conventional group, before pregnancy as well as 4-5 years after delivery. This difference was partly retained after adjusting for potential confounders. Furthermore, women in the alternative group had a lower prevalence of pregnancy-related hypertension, more often started breastfeeding and gave exclusive and prolonged breastfeeding for a longer period. Finally, they smoked less often, but more often drunk alcohol during pregnancy. The results suggest that an alternative lifestyle is associated with favourable body weight and with several differences in other health features.

A Simulation-Based Comparison of Several Stochastic Linear Regression Methods in the Presence of Outliers.

ERIC Educational Resources Information Center

Rule, David L.

Several regression methods were examined within the framework of weighted structural regression (WSR), comparing their regression weight stability and score estimation accuracy in the presence of outlier contamination. The methods compared are: (1) ordinary least squares; (2) WSR ridge regression; (3) minimum risk regression; (4) minimum risk 2;…

21 CFR 177.1440 - 4,4′-Isopropylidenediphenol-epichlorohydrin resins minimum molecular weight 10,000.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 3 2010-04-01 2009-04-01 true 4,4â²-Isopropylidenediphenol-epichlorohydrin resins minimum molecular weight 10,000. 177.1440 Section 177.1440 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD FOR HUMAN CONSUMPTION (CONTINUED) INDIRECT FOOD...

The effect of weight and drag on the sinking speed and lift/drag ratio of gliders

NASA Technical Reports Server (NTRS)

Kosin, R

1934-01-01

The most important factors in evaluating performance of gliders are minimum sinking speed and minimum gliding angle. To assure their optimum value the energy necessary for flight, that is, the energy of lift and friction must be kept very low, or in other words, weight and total drag which have a decisive effect on the sinking speed and on the gliding angle, must be kept to a minimum. How great the effect of a reduction of these two quantities will be shown in the following.

Geoelectric Characterization of Thermal Water Aquifers Using 2.5D Inversion of VES Measurements

NASA Astrophysics Data System (ADS)

Gyulai, Á.; Szűcs, P.; Turai, E.; Baracza, M. K.; Fejes, Z.

2017-03-01

This paper presents a short theoretical summary of the series expansion-based 2.5D combined geoelectric weighted inversion (CGWI) method and highlights the advantageous way with which the number of unknowns can be decreased due to the simultaneous characteristic of this inversion. 2.5D CGWI is an approximate inversion method for the determination of 3D structures, which uses the joint 2D forward modeling of dip and strike direction data. In the inversion procedure, the Steiner's most frequent value method is applied to the automatic separation of dip and strike direction data and outliers. The workflow of inversion and its practical application are presented in the study. For conventional vertical electrical sounding (VES) measurements, this method can determine the parameters of complex structures more accurately than the single inversion method. Field data show that the 2.5D CGWI which was developed can determine the optimal location for drilling an exploratory thermal water prospecting well. The novelty of this research is that the measured VES data in dip and strike direction are jointly inverted by the 2.5D CGWI method.

49 CFR Appendix A to Part 223 - Certification of Glazing Materials

Code of Federal Regulations, 2011 CFR

2011-10-01

... material to be tested (Target Material) shall be a full scale sample of the largest dimension intended to... weight impacts at a minimum of 960 feet per second velocity. (ii) Large Object Impact in which a cinder block of 24 lbs minimum weight with dimensions of 8 inches by 8 inches by 16 inches nominally impacts at...

76 FR 56120 - Atlantic Highly Migratory Species; North and South Atlantic Swordfish Quotas

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-12

... Contracting Parties. Contracting Parties may restrict fishermen to a minimum size of 25 kg live weight OR 125... restrict fishermen to a minimum size of 15 kg live weight OR 119 cm LJFL with no tolerance. In 2009, NMFS... quota, among other things. Per the ATCA, the United States is obligated to implement ICCAT-approved...

Pine wilt disease in Yunnan, China: Evidence of non-local pine sawyer Monochamus alternatus (Coloptera: Cerambycidae) populations revealed by mitochondrial DNA

Treesearch

Da-Ying Fu; Shao-Ji Hu; Hui Ye; Robert A. Haack; Ping-Yang Zhou

2010-01-01

Monochamus alternatus (Hope) specimens were collected from nine geographical populations in China,where the pinewood nematode Bursaphelenchus xylophilus (Steiner et Buhrer) was present. There were seven populations in southwestern China in Yunnan Province (Ruili,Wanding, Lianghe, Pu'er, Huaning, Stone Forest and Yongsheng),...

A Pleasurable Path to Literacy: Can Steiner Contribute to the Literacy Debate?

ERIC Educational Resources Information Center

Burnett, John

2007-01-01

Although the recent publication of the Rose Report appears to draw a line in the sand that privileges synthetic phonics over other methods in the UK, history indicates a pendulum swing of preference between whole-word and phonics since the advent of mass education. Suggesting that the current "victory" for exponents of synthetic phonics…

"Embodied Knowing": Exploring the Founding of the Melbourne Rudolf Steiner School in 1970S Victoria, Australia

ERIC Educational Resources Information Center

Bak, Tao

2018-01-01

Education in Victoria, Australia not only underwent significant change in the 1970s, but was witness to a widespread educational reform project. Whilst exploration of the more widespread alternatives has been of some interest, the smaller progressive traditions that emerged in some ways "alongside" the broader reforms have rarely been…

Principals as Partners with Literacy Coaches: Striking a Balance between Neglect and Interference

ERIC Educational Resources Information Center

Ippolito, Jacy

2009-01-01

What role must principals play in order to effectively support literacy coaching efforts? This is a question that many educators have begun to ask (Burkins, 2007; Casey, 2006; Kral, 2007; Shanklin, 2007; Steiner & Kowal, 2007; Toll, 2008). Some suggest that principals can establish close relationships with literacy coaches by offering a number…

Using the Preschool Language Scale, Fourth Edition to Characterize Language in Preschoolers with Autism Spectrum Disorders

ERIC Educational Resources Information Center

Volden, Joanne; Smith, Isabel M.; Szatmari, Peter; Bryson, Susan; Fombonne, Eric; Mirenda, Pat; Roberts, Wendy; Vaillancourt, Tracy; Waddell, Charlotte; Zwaigenbaum, Lonnie; Georgiades, Stelios; Duku, Eric; Thompson, Ann

2011-01-01

Purpose: The Preschool Language Scale, Fourth Edition (PLS-4; Zimmerman, Steiner, & Pond, 2002) was used to examine syntactic and semantic language skills in preschool children with autism spectrum disorders (ASD) to determine its suitability for use with this population. We expected that PLS-4 performance would be better in more…

Creativity and Complex Thoughts of Gifted Students from Contributions of Edgar Morin and Rudolf Steiner

ERIC Educational Resources Information Center

Piske, Fernanda Hellen Ribeiro; Stoltz, Tania; Guérios, Ettiène; de Freitas, Samarah Perszel

2016-01-01

This study aims to highlight the importance of creativity in education of gifted children. Gifted students are generally individuals that talk with uncertainty because they are always looking for solutions and discoveries for their varied researches in their area of interest. These students need educational practices that develop creativity and…

Rudolf Steiner's Philosophy of Freedom as a Basis for Spiritual Education?

ERIC Educational Resources Information Center

Oberski, Iddo

2011-01-01

The spiritual well-being of children is often thought to be an important goal and outcome of education. Such spiritual well-being is also implicitly assumed by the Human Rights Act, which includes the right to "freedom of thought, conscience and religion" [Article 18]. I argue that such freedom requires an education that fosters development of…

Maryblyt v. 7.1 for Windows: an improved fire blight forecasting program for apples and pears

USDA-ARS?s Scientific Manuscript database

This article describes updates found in Version 7.1 of the fire blight prediction model Maryblyt, originally developed by Paul Steiner and Gary Lightner. In addition, a brief history of the development of the Maryblyt model is given. The article ends with examples comparing the performance of Versio...

An Interpretation of Rudolf Steiner's Theory of Child Development and School Readiness.

ERIC Educational Resources Information Center

Ogletree, Earl J.

Viewing human development as a process by which the human gains self-control, this essay argues that locomotion and speech are control-oriented motor movements and suggests that cognition is also a form of movement developed as the individual achieves control over his or her thinking processes. Support for this view of cognitive development is…

76 FR 70452 - Granting of Request for Early Termination of the Waiting Period Under the Premerger Notification...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... plc; Cargill, Incorporated; Kerry Group plc. 10/25/2011 20120050 G J.C. Penney Company, Inc.; Liz Claiborne, Inc.; J.C. Penney Company, Inc. 10/26/2011 20120003 G Vista Equity Partners Fund IV, L.P.; The... Image Development, Inc.; Steiner Leisure Limited. 20120064 G Vention Medical, Inc.; Christine Bieber...

Looking Forward: Games, Rhymes and Exercises To Help Children Develop Their Learning Abilities.

ERIC Educational Resources Information Center

von Heider, Molly

The range of games, rhymes, songs, and exercises for children collected in this book are based on Rudolf Steiner's educational philosophy and are designed to lay the foundation for sound later learning. The book's chapters are: (1) "Learning Aids"; (2) "The Early Years"; (3) "Foot Exercises: Kindergarten or Class I, 5-7…

Eurythmy: A Motoric and Artistic Method of Teaching Young Children.

ERIC Educational Resources Information Center

Ogletree, Earl J.

This paper introduces a form of movement-therapy known as Eurythmy, an art of movement that expresses visibly the sounds of speech and the tones and intervals of music. Created by Rudolf Steiner in 1912, Eurythmy differs from other arts in its therapeutic value, educational applications, and the physiopsychological theory upon which it is based.…

Child Development and the Coworking of Doctor and Teacher: A Waldorf School Doctor's Perspective.

ERIC Educational Resources Information Center

Karnow, Gerald F.

This paper draws on the nearly 20 years' experiences of a school doctor working with teachers at the Rudolf Steiner School in New York City to describe general principles of assessing child development in relation to educational progress. The paper contrasts the customary role of school doctors (related to conducting physical examinations for…

The Comparative Status of the Creative Thinking Ability of Waldorf Education Students: A Survey.

ERIC Educational Resources Information Center

Ogletree, Earl J.

Waldorf Education, founded by Rudolf Steiner in 1919, is based on the philosophy of critical idealism, in which teachers assist in the natural unfolding of children's preexistent possibilities. But because there has been little research on Waldorf Education, few data have been gathered on the effectiveness of its teaching methods and…

The Common Vision: Parenting and Educating for Wholeness.

ERIC Educational Resources Information Center

Marshak, David

2003-01-01

Presents a spiritually based view of needs and potentials of children and youth, from birth through age 21, based on works of Rudolf Steiner, Sri Aurobindo Ghose, and Hazrat Inayat Khan. Focuses on their common vision of the true nature of human beings, the course of human growth, and the desired functions of child rearing and education.…

Fermilab Today

Science.gov Websites

Theories 3:30 p.m. DIRECTOR'S COFFEE BREAK - 2nd Flr X-Over 4:00 p.m. Accelerator Physics and Technology ; --Siri Steiner Temporary restrictions transferring disk drives If your hard drive breaks down and you try to you. They are just following a new rule. According to a recent DOE memo, no hard disk drive or

The Job Satisfaction-Life Satisfaction Relationship for Educators: A Cross-Cultural Study.

ERIC Educational Resources Information Center

Klass, Patricia Harrington; Michael, Noreen

This study replicates a cross-cultural study by Steiner and Truxillo (1987) that tested completing hypotheses concerning the relationship between job and life satisfaction. It tested the generalization of the original study in two ways: it examined educators instead of managers and it compared those from Western and Eastern cultures rather than…

Truss topology optimization with simultaneous analysis and design

NASA Technical Reports Server (NTRS)

Sankaranarayanan, S.; Haftka, Raphael T.; Kapania, Rakesh K.

1992-01-01

Strategies for topology optimization of trusses for minimum weight subject to stress and displacement constraints by Simultaneous Analysis and Design (SAND) are considered. The ground structure approach is used. A penalty function formulation of SAND is compared with an augmented Lagrangian formulation. The efficiency of SAND in handling combinations of general constraints is tested. A strategy for obtaining an optimal topology by minimizing the compliance of the truss is compared with a direct weight minimization solution to satisfy stress and displacement constraints. It is shown that for some problems, starting from the ground structure and using SAND is better than starting from a minimum compliance topology design and optimizing only the cross sections for minimum weight under stress and displacement constraints. A member elimination strategy to save CPU time is discussed.

Integrated multidisciplinary design optimization of rotorcraft

NASA Technical Reports Server (NTRS)

Adelman, Howard M.; Mantay, Wayne R.

1989-01-01

The NASA/Army research plan for developing the logic elements for helicopter rotor design optimization by integrating appropriate disciplines and accounting for important interactions among the disciplines is discussed. The paper describes the optimization formulation in terms of the objective function, design variables, and constraints. The analysis aspects are discussed, and an initial effort at defining the interdisciplinary coupling is summarized. Results are presented on the achievements made in the rotor aerodynamic performance optimization for minimum hover horsepower, rotor dynamic optimization for vibration reduction, rotor structural optimization for minimum weight, and integrated aerodynamic load/dynamics optimization for minimum vibration and weight.

Development of Army High-Energy Fuel for Diesel/Turbine-Powered Surface Equipment. Phase II

DTIC Science & Technology

1981-12-01

preparation. The same extracting procedure used with methylene chloride was then used with pen- tans. A 3.0-percent loss in weight was noted, and a residue...minimum time to reach the target, and minimum weight . Since small missiles, such as the cruise, are volume-limited, it is imperative that the fuel contains...tetrahydrodicyclopentadiene (C1 0 R1 6 ) Molecular Weight 136.2 C:H Ratio 0.62 r Specific Gravity @ 15.60C (60*F) 0.94 Heating Value, Btu/gal. 142,000

Development of Gis Tool for the Solution of Minimum Spanning Tree Problem using Prim's Algorithm

NASA Astrophysics Data System (ADS)

Dutta, S.; Patra, D.; Shankar, H.; Alok Verma, P.

2014-11-01

minimum spanning tree (MST) of a connected, undirected and weighted network is a tree of that network consisting of all its nodes and the sum of weights of all its edges is minimum among all such possible spanning trees of the same network. In this study, we have developed a new GIS tool using most commonly known rudimentary algorithm called Prim's algorithm to construct the minimum spanning tree of a connected, undirected and weighted road network. This algorithm is based on the weight (adjacency) matrix of a weighted network and helps to solve complex network MST problem easily, efficiently and effectively. The selection of the appropriate algorithm is very essential otherwise it will be very hard to get an optimal result. In case of Road Transportation Network, it is very essential to find the optimal results by considering all the necessary points based on cost factor (time or distance). This paper is based on solving the Minimum Spanning Tree (MST) problem of a road network by finding it's minimum span by considering all the important network junction point. GIS technology is usually used to solve the network related problems like the optimal path problem, travelling salesman problem, vehicle routing problems, location-allocation problems etc. Therefore, in this study we have developed a customized GIS tool using Python script in ArcGIS software for the solution of MST problem for a Road Transportation Network of Dehradun city by considering distance and time as the impedance (cost) factors. It has a number of advantages like the users do not need a greater knowledge of the subject as the tool is user-friendly and that allows to access information varied and adapted the needs of the users. This GIS tool for MST can be applied for a nationwide plan called Prime Minister Gram Sadak Yojana in India to provide optimal all weather road connectivity to unconnected villages (points). This tool is also useful for constructing highways or railways spanning several cities optimally or connecting all cities with minimum total road length.

7 CFR 51.311 - Marking requirements.

Code of Federal Regulations, 2012 CFR

2012-01-01

... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...

7 CFR 51.311 - Marking requirements.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...

7 CFR 51.311 - Marking requirements.

Code of Federal Regulations, 2011 CFR

2011-01-01

... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...

[Adolescent pregnancy: maternal characteristics and their association with birth weight of the newborn].

PubMed

Restrepo-Mesa, Sandra Lucía; Zapata López, Natalia; Parra Sosa, Beatriz Elena; Escudero Vásquez, Luz Estela; Atalah, Eduardo

2014-06-01

In Colombia, adolescent pregnancy is a public health problem, with serious implications for the health and nutrition of the binomial mother-child. assess socio-demographic, economic, food security, health and maternal nutritional status characteristics by anthropometric measures in a group of pregnant adolescents in Medellin-Colombia on their third trimester of pregnancy and associate them with the newborns weight. A cross sectional analytical study was made with 294 pregnant women (week 27 to 40), who participating in prenatal control program of the public hospital network in Medellin-Colombia. We sought Association of weight at birth with the explanatory variables. underweight in pregnant women was presented in families that had lower income wages than the Standard Minimum Wage Income--SMWI-, adolescents who were younger than 15 years old and those who had a gynecological age less than five years. In newborns, the highest proportion of small children for pregnancy age was found in mothers who presented infections, low pregnancy weight and low family income less than the minimum wage. For those whose earnings was less than the minimum income the newborn weight decreased 118g (CI 95%: -2.5 a - 234.7), in addition, for each kilogram that increased the pre-pregnancy weight, newborn weight increased in 10,26g (CI 95%: 1.98 a-18.5). low-weight pregnancy and low-weight newborns are associated with low family income. Pre-pregnancy weight, body mass index in the third trimester of pregnancy and mother's presence of urinary tract and vaginal infections were associated with the newborn's weight.

The Mystery of Waldorf: A Turn-of-the-Century German Experiment on Today's American Soil.

ERIC Educational Resources Information Center

Oberman, Ida

At its inception, Waldorf education was not to be a special, "boutique" reform. Nor was it to cater to children of a higher social standing. In fact, Waldorf broke out of the hierarchically tracked education system present in turn-of-the-century Germany. The founding father, Rudolf Steiner, called for a "Volks" pedagogy, a…

Nurturing the Aesthetic: Learning to Care for the Environment in a Waldorf School

ERIC Educational Resources Information Center

Grella, Melissa A.

2015-01-01

The purpose of the study was to explore the aesthetic foundation of the Waldorf pedagogy in order to understand how art and aesthetic experiences may develop care toward the environment. A form of humanistic education developed by Rudolf Steiner in the early twentieth century, Waldorf education is a learning model envisioned as a framework for…

Focus on Evaluation and Measurement. Proceedings of the National Research Symposium on Limited English Proficient Student Issues (Washington, D.C., September 1991). Volumes 1 and 2.

ERIC Educational Resources Information Center

1992

This document is comprised of a two-volume conference proceedings. The first volume includes the following papers: "Application of Multiple Intelligences: Research in Alternative Assessment" (Joseph Walters) Discussants: Vera John-Steiner, Sue Teele; "Improving Bilingual Education Programs through Evaluation" (Alan L. Ginsburg); "Language Testing…

Teaching Learning and Discipleship: Education beyond Knowledge Transfer

ERIC Educational Resources Information Center

Wringe, Colin

2009-01-01

An attempt is made to identify what some have felt to be absent from recent official views as to how curricula and the transfer of knowledge are most performatively to be managed. To this end, particular conceptions of teaching and learning are proposed, and use is made of recent work by George Steiner in elaborating a third variant of the…

Voyage through Childhood into the Adult World: A Guide to Child Development. Lifeways Series. Second Edition.

ERIC Educational Resources Information Center

Frommer, Eva A.

Originally written for students at St. Thomas' Hospital in London, this guide to child development offers an overview of child development for parents, teachers, and all adults concerned with raising children. Many of the book's ideas come from direct work with children and draw on Rudolf Steiner's approach to child development. The book's…

Learning From Rudolf Steiner: The Relevance of Waldorf Education for Urban Public School Reform

ERIC Educational Resources Information Center

Oberman, Ida

2007-01-01

The author of this paper investigates the relevance of Waldorf education for public urban school reform. Based on analysis of survey data from over 500 graduates of private U.S. Waldorf schools, review of documents from the Gates Foundation, and staff-interview and student-achievement data from four public Waldorf-methods schools, she develops…

Integrating Vocational and General Education: A Rudolf Steiner School. Case Study of the Hibernia School, Herne, Federal Republic of Germany. UIE Case Studies 1.

ERIC Educational Resources Information Center

Rist, Georg; Schneider, Peter

This study describes and analyzes the Hibernia School where the aim of curriculum articulation in its essential vertical and horizontal dimensions has been successfully converted into actual practice. (Curriculum articulation means the equal representation and integration of three major components--artistic, practical, and academic learning.)…

Intellect, Dream and Action: Story-Telling in Steiner Schools in New Zealand and the Embedding of Indigenous Narrative Knowledge in Education

ERIC Educational Resources Information Center

Burnett, John

2015-01-01

This paper argues that the historic mode of expression for Indigenous knowledge has been essentially visionary and mythic, often grounded in oral traditions of great antiquity. Essentially, communication of this knowledge has had a poetic "supernormal" character, employing imagery that can be interpreted on many levels. The danger of…

Efficacy of commercial microwave equipment for eradication of pine wood nematodes and cerambycid larvae infesting red pine

Treesearch

Mary R. Fleming; John J. Janowiak; Jeffrey D. Kimmel; John M. Halbrendt; Leah S. Bauer; Kelli Hoover

2005-01-01

The feasibility of using commercial 2.45-GHz microwave equipment to kill cerambycid larvae and pinewood nematodes(PWN) [Bursaphelenchus xylophilus (Steiner and Buhrer) Nickle] infesting lumber was investigated. Research goals were to test a system of separating green material into moisture content(MC)ranges and to determine the feasibility of using...

Teacher Education Homing In on Content: National Project Also Tied to Student Achievement

ERIC Educational Resources Information Center

Jacobson, Linda

2005-01-01

Just upstairs from an exhibit on African culture at the American Museum of Natural History, Robert V. Steiner sits in front of his laptop computer and clicks on an "interactive animation" that illustrates the concept of frames of reference. On the screen, a glowing basketball bounces up and down against a black background. After watching…

On the Effectiveness of Wastewater Cylindrical Reactors: an Analysis Through Steiner Symmetrization

NASA Astrophysics Data System (ADS)

Díaz, J. I.; Gómez-Castro, D.

2016-03-01

The mathematical analysis of the shape of chemical reactors is studied in this paper through the research of the optimization of its effectiveness η such as introduced by R. Aris around 1960. Although our main motivation is the consideration of reactors specially designed for the treatment of wastewaters our results are relevant also in more general frameworks. We simplify the modeling by assuming a single chemical reaction with a monotone kinetics leading to a parabolic equation with a non-necessarily differentiable function. In fact we consider here the case of a single, non-reversible catalysis reaction of chemical order q, 00). We assume the chemical reactor of cylindrical shape Ω =G× (0,H) with G and open regular set of {R}2 not necessarily symmetric. We show that among all the sections G with prescribed area the ball is the set of lowest effectiveness η (t,G). The proof uses the notions of Steiner rearrangement. Finally, we show that if the height H is small enough then the effectiveness can be made as close to 1 as desired.

Roy-Steiner-equation analysis of pion-nucleon scattering

NASA Astrophysics Data System (ADS)

Hoferichter, Martin; Ruiz de Elvira, Jacobo; Kubis, Bastian; Meißner, Ulf-G.

2016-04-01

We review the structure of Roy-Steiner equations for pion-nucleon scattering, the solution for the partial waves of the t-channel process ππ → N ¯ N, as well as the high-accuracy extraction of the pion-nucleon S-wave scattering lengths from data on pionic hydrogen and deuterium. We then proceed to construct solutions for the lowest partial waves of the s-channel process πN → πN and demonstrate that accurate solutions can be found if the scattering lengths are imposed as constraints. Detailed error estimates of all input quantities in the solution procedure are performed and explicit parameterizations for the resulting low-energy phase shifts as well as results for subthreshold parameters and higher threshold parameters are presented. Furthermore, we discuss the extraction of the pion-nucleon σ-term via the Cheng-Dashen low-energy theorem, including the role of isospin-breaking corrections, to obtain a precision determination consistent with all constraints from analyticity, unitarity, crossing symmetry, and pionic-atom data. We perform the matching to chiral perturbation theory in the subthreshold region and detail the consequences for the chiral convergence of the threshold parameters and the nucleon mass.

The Electronic Valve Instrument (EVI), an electronic musical wind controller for playing synthesizers

NASA Astrophysics Data System (ADS)

Steiner, Nyle A.

2004-05-01

The Electronic Valve Instrument (EVI) is an electronic musical wind instrument with playing techniques similar to that of a trumpet. Invented by Nyle Steiner in the early 1970's, it was designed to give the performer control of dynamics from breath pressure and the ability to make a humanly generated vibrato. Other musical paramaters can be controlled as well. It has a playing range of seven octaves (similar to that of a piano). When musical lines are played using this instrument (controller) connected to an electronic music synthesizer, the sound is much more natural sounding and expressive than when a normal musical keyboard is used. The evolution of this instrument from the pre-Midi era to it latest Midi configuration, principles of operation, synthesizer programming, and its wide use in movie and TV scoring will be discussed. The EVI has played featured musical lines in many major movie soundtracks and TV shows such as Apocalypse Now, Witness, Dead Poets Society, Fatal Attraction, No Way Out, Gorillas in the Mist, and many others. The EVI design has also been adapted as an Electronic Woodwind Instrument (EWI) by Nyle Steiner and has been manufactured and sold worldwide by the AKAI Co. in Japan.

System design of the Pioneer Venus spacecraft. Volume 7: Communication subsystem studies

NASA Technical Reports Server (NTRS)

Newlands, D. M.

1973-01-01

Communications subsystem tradeoffs were undertaken to establish a low cost and low weight design consistent with the mission requirements. Because of the weight constraint of the Thor/Delta launched configuration, minimum weight was emphasized in determining the Thor/Delta design. In contrast, because of the greatly relaxed weight constraint of the Atlas/Centaur launched configuration, minimum cost and off the shelf hardware were emphasized and the attendant weight penalities accepted. Communication subsystem hardware elements identified for study included probe and bus antennas (CM-6, CM-17), power amplifiers (CM-10), and the large probe transponder and small probe stable oscillator required for doppler tracking (CM-11, CM-16). In addition, particular hardware problems associated with the probe high temperature and high-g environment were investigated (CM-7).

Randomized, open trial comparing a modified double-lumen needle follicular flushing system with a single-lumen aspiration needle in IVF patients with poor ovarian response.

PubMed

von Horn, Kyra; Depenbusch, Marion; Schultze-Mosgau, Askan; Griesinger, Georg

2017-04-01

Is a modified double-lumen aspiration needle system with follicular flushing able to increase the mean oocyte yield by at least one in poor response IVF patients as compared to single-lumen needle aspiration without flushing? Follicular flushing with the modified flushing system did not increase the number of oocytes, but increased the procedure duration. Most studies on follicular flushing were performed with conventional double-lumen needles in patients who were normal responders. Overall, these studies indicated no benefit of follicular flushing. Prospective, single-centre, randomized, controlled, open, superiority trial comparing the 17 G Steiner-Tan Needle® flushing system with a standard 17 G single-lumen aspiration needle (Gynetics®); time frame February 2015-March 2016. Eighty IVF patients, 18-45 years, BMI >18 kg/m2 to <35 kg/m2, presenting with ≤ five follicles >10 mm in both ovaries at the end of the follicular phase were randomized to either aspirating and flushing each follicle 3× with the Steiner-Tan-Needle® automated flushing system (n = 40) or a conventional single-lumen needle aspiration (n = 40). Primary outcome was the number of cumulus-oocyte-complexes (COCs). Procedure duration, burden (Depression Anxiety and Stress Scale; DASS-21) and post-procedure pain were also assessed. Flushing was not superior with a mean (SD) number of COCs of 2.4 (2.0) and 3.1 (2.3) in the Steiner-Tan Needle® and in the Gynectics® group, respectively (mean difference -0.7, 95% CI: 0.3 to -1.6; P = 0.27). Likewise no differences were observed in metaphase II  oocytes, two pronuclear oocytes, number of patients having an embryo transfer and DASS 21 scores. The procedure duration was significantly 2-fold increased. Testing for differences in the number of patients achieving an embryo transfer or differences in pregnancy rate would require a much larger sample size. The use of follicular flushing is unlikely to benefit the prognosis of patients with poor ovarian response. The Steiner-Tan Needles® and the flushing system were provided for free by the manufacturer. K.v.H. has received personal fees from Finox and non-financial support from Merck-Serono; M.D. has received personal fees from Finox and non-financial support from Merck-Serono. A.S.-M. has received personal fees and non-financial support from M.D., Ferring, Merck-Serono, Finox, TEVA. G.G. has received personal fees and non-financial support from M.D., Ferring, Merck-Serono, Finox, TEVA, IBSA, Glycotope, as well as personal fees from VitroLife, NMC Healthcare LLC, ReprodWissen LLC and ZIVA LLC. NCT 02365350 (clinicaltrials.gov). Sixth of February 2015. Ninth of February 2015. © The Author 2017. Published by Oxford University Press on behalf of the European Society of Human Reproduction and Embryology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

Treating Vomiting

MedlinePlus

... those descibed below. Estimated Oral Fluid and Electrolyte Requirements by Body Weight Body Weight (in pounds) Minimum Daily Fluid Requirements (in ounces)* Electrolyte Solution Requirements for Mild Diarrhea ( ...

An evaluation of benthic macroinvertebrate biomass methodology : Part 1. Laboratory analytical methods.

PubMed

Mason, W T; Lewis, P A; Weber, C I

1983-03-01

Evaluation of analytical methods employed for wet weight (live or preserved samples) of benthic macroinvertebrates reveals that centrifugation at 140 x gravity for one minute yields constant biomass estimates. Less relative centrifugal force increases chance of incomplete removal of body moisture and results in weighing error, while greater force may rupture fragile macroinvertebrates, such as mayflies. Duration of specimen exposure in ethanol, formalin, and formol (formaling-ethanol combinations) causes significant body weight loss with within 48 hr formalin and formol cause less body weight loss than ethanol. However, as all preservatives tested cause body weight loss, preservation time of samples collected for comparative purposes should be treated uniformly. Dry weight estimates of macroinvertebrates are not significantly affected by kind of preservative or duration of exposure. Constant dry weights are attained by oven drying at 103 °C at a minimum of four hours or vacuum oven drying (15 inches of mercury pressure) at 103 °C for a minimum of one hour. Although requiring more time in preparation than oven drying and inalterably changing specimen body shape, freeze drying (10 microns pressure, -55 °C, 24 hr) provides constant dry weights and is advantageous for long term sample storage by minimizing curatorial attention. Constant ash-free dry weights of macroinvertebrate samples are attained by igniting samples at 500-550 °C for a minimum of one hour with slow cooling to room temperature in desiccators before weighing.

Minimum Weight Design of a Leaf Spring Tapered in Thickness and Width for the Hubble Space Telescope-Space Support Equipment

NASA Technical Reports Server (NTRS)

Rodriguez, P. I.

1990-01-01

A linear elastic solution to the problem of minimum weight design of cantilever beams with variable width and depth is presented. The solution shown is for the specific application of the Hubble Space Telescope maintenance mission hardware. During these maintenance missions, delicate instruments must be isolated from the potentially damaging vibration environment of the space shuttle cargo bay during the ascent and descent phases. The leaf springs are designed to maintain the isolation system natural frequency at a level where load transmission to the instruments in a minimum. Nonlinear programming is used for the optimization process. The weight of the beams is the objective function with the deflection and allowable bending stress as the constraint equations. The design variables are the width and depth of the beams at both the free and the fixed ends.

Connectivity Restoration in Wireless Sensor Networks via Space Network Coding.

PubMed

Uwitonze, Alfred; Huang, Jiaqing; Ye, Yuanqing; Cheng, Wenqing

2017-04-20

The problem of finding the number and optimal positions of relay nodes for restoring the network connectivity in partitioned Wireless Sensor Networks (WSNs) is Non-deterministic Polynomial-time hard (NP-hard) and thus heuristic methods are preferred to solve it. This paper proposes a novel polynomial time heuristic algorithm, namely, Relay Placement using Space Network Coding (RPSNC), to solve this problem, where Space Network Coding, also called Space Information Flow (SIF), is a new research paradigm that studies network coding in Euclidean space, in which extra relay nodes can be introduced to reduce the cost of communication. Unlike contemporary schemes that are often based on Minimum Spanning Tree (MST), Euclidean Steiner Minimal Tree (ESMT) or a combination of MST with ESMT, RPSNC is a new min-cost multicast space network coding approach that combines Delaunay triangulation and non-uniform partitioning techniques for generating a number of candidate relay nodes, and then linear programming is applied for choosing the optimal relay nodes and computing their connection links with terminals. Subsequently, an equilibrium method is used to refine the locations of the optimal relay nodes, by moving them to balanced positions. RPSNC can adapt to any density distribution of relay nodes and terminals, as well as any density distribution of terminals. The performance and complexity of RPSNC are analyzed and its performance is validated through simulation experiments.

An Adaptive Data Gathering Scheme for Multi-Hop Wireless Sensor Networks Based on Compressed Sensing and Network Coding.

PubMed

Yin, Jun; Yang, Yuwang; Wang, Lei

2016-04-01

Joint design of compressed sensing (CS) and network coding (NC) has been demonstrated to provide a new data gathering paradigm for multi-hop wireless sensor networks (WSNs). By exploiting the correlation of the network sensed data, a variety of data gathering schemes based on NC and CS (Compressed Data Gathering--CDG) have been proposed. However, these schemes assume that the sparsity of the network sensed data is constant and the value of the sparsity is known before starting each data gathering epoch, thus they ignore the variation of the data observed by the WSNs which are deployed in practical circumstances. In this paper, we present a complete design of the feedback CDG scheme where the sink node adaptively queries those interested nodes to acquire an appropriate number of measurements. The adaptive measurement-formation procedure and its termination rules are proposed and analyzed in detail. Moreover, in order to minimize the number of overall transmissions in the formation procedure of each measurement, we have developed a NP-complete model (Maximum Leaf Nodes Minimum Steiner Nodes--MLMS) and realized a scalable greedy algorithm to solve the problem. Experimental results show that the proposed measurement-formation method outperforms previous schemes, and experiments on both datasets from ocean temperature and practical network deployment also prove the effectiveness of our proposed feedback CDG scheme.

Research Needs for Human Factors.

DTIC Science & Technology

1983-01-19

the parties aggregate their perspectives through some structured interaction (Sachman, 1975; Steiner, 1972). This approach, well worked by students of...be thought of as an action, so may each action be thought of as a decision. Most students of decision making would probably agree with the hypothesis...structuring has become part of the training of some medical students . The user of computerized information retrieval systems (e.g., Prestel, Teletext) might

Agent-based Approaches to Dynamic Team Simulation

DTIC Science & Technology

2008-09-01

Pittsburgh Reviewed by Paul Rosenfeld, Ph.D. Institute for Organizational Assessment Approved and released by David L. Alderton, Ph.D. Director...architects as artistic or of clerks as conventional. Steiner (1972) proposed a functional taxonomy recently adopted by Barrick, Stewart, Neubert ... Paul (1998) again found agreeableness to account for 8 percent of the variance in measures of fit to an organization. There appears to be better

A State-Independent Education for Citizenship? Comparing Beliefs and Values Related to Civic and Moral Issues among Students in Swedish Mainstream and Steiner Waldorf Schools

ERIC Educational Resources Information Center

Dahlin, Bo

2010-01-01

In the wake of globalisation, multiculturalism, and the "marketisation" of schools the education-for-citizenship question in relation to state and independent schools seems increasingly relevant. This paper is based on a comparison of beliefs and values related to civic and moral issues among students in Swedish mainstream and Steiner…

Here's What You Must Think about Nuclear Power: Grappling with the Spiritual Ground of Children's Judgement inside and outside Steiner Waldorf Education

ERIC Educational Resources Information Center

Ashley, Martin

2008-01-01

The author has previously argued against "early closure"--the tendency to close down children's curiosity through an over-zealous approach to issues-based education. Indoctrination might be a result but "burn-out," a potentially permanent attitude change that sets in before puberty, is more likely. This article is based on the…

Geographical variation in seasonality and life history of pine sawyer beetles Monochamus spp: its relationship with phoresy by the pinewood nematode Bursaphelenchus xylophilus.

Treesearch

Carla S. Pimentel; Matthew P. Ayres; Vallery Erich; Chris Young; Douglas Streett

2014-01-01

Bursaphelenchus xylophilus (Steiner & Buhrer) (Nematoda: Aphelenchoididae), the pinewood nematode and the causal agent of the pine wilt disease, is a globally important invasive pathogen of pine forests. It is phoretic in woodborer beetles of the genus Monochamus (Megerle) (Coleoptera, Cerambycidae) and has been able to exploit novel indigenous species of...

Business Culture and the Death of Public Education: Mayor Bloomberg, David Steiner, and the Politics of Corporate "Leadership"

ERIC Educational Resources Information Center

Giroux, Henry A.

2011-01-01

This article provides a case study of how a business culture imposes modes of educational leadership on a public school system in New York City that has little if any concerns for empowering children, teachers, and the communities. The article provides a counter-narrative that serves to dispel the notion that the culture of educational empowerment…

A Computational Study of the Chemical Kinetics of Hydrogen Combustion.

DTIC Science & Technology

1981-01-28

204), 465 (1951). 22. D.R. Warren, Proc. Roy. Soc. London, Ser A(211), 86 (1952). 23. D.R. Stull and H. Prophet, JANAF Thermochemical Tables, 2nd...G. von Elbe and B. Lewis, J. Chem. Phys.. 9. p. 194 (1941). 61. A.M. Dean . D.C. Steiner and E.E. Wang, Combustion and Flame. 32, p. 73 (1978). 62. C.C

The Common Vision: Parenting and Educating for Wholeness. Counterpoints: Studies in the Postmodern Theory of Education, Volume 48.

ERIC Educational Resources Information Center

Marshak, David

This book describes the needs and potentials of children and youth from birth to age 21, based on a holistic understanding of what human beings are and can become. The description is based on the insights of three early twentieth-century spiritual teachers--Rudolf Steiner, Aurobindo Ghose, and Inayat Khan--whose works, the book claims, articulate…

Understanding Children's Drawings: The Path to Manhood. With "Notes on the Study of Man," By Wolfgang Schad.

ERIC Educational Resources Information Center

Strauss, Michaela

Based on the notes of Hanns Strauss and his collection of 6,000 drawings by 2- to 7-year-olds, this book describes the stages of development of children's drawings by using the framework of Rudolf Steiner's "anthroposophical" science. In the introduction, the early development of children's drawing is compared with works of art left by…

Minimum weight design of rectangular and tapered helicopter rotor blades with frequency constraints

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi; Walsh, Joanne L.

1988-01-01

The minimum weight design of a helicopter rotor blade subject to constraints on coupled flap-lag natural frequencies has been studied. A constraint has also been imposed on the minimum value of the autorotational inertia of the blade in order to ensure that it has sufficient inertia to autorotate in the case of engine failure. The program CAMRAD is used for the blade modal analysis and CONMIN is used for the optimization. In addition, a linear approximation analysis involving Taylor series expansion has been used to reduce the analysis effort. The procedure contains a sensitivity analysis which consists of analytical derivatives of the objective function and the autorotational inertia constraint and central finite difference derivatives of the frequency constraints. Optimum designs have been obtained for both rectangular and tapered blades. Design variables include taper ratio, segment weights, and box beam dimensions. It is shown that even when starting with an acceptable baseline design, a significant amount of weight reduction is possible while satisfying all the constraints for both rectangular and tapered blades.

Minimum weight design of rectangular and tapered helicopter rotor blades with frequency constraints

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi; Walsh, Joanne L.

1988-01-01

The minimum weight design of a helicopter rotor blade subject to constraints on coupled flap-lag natural frequencies has been studied. A constraint has also been imposed on the minimum value of the autorotational inertia of the blade in order to ensure that it has sufficient inertia to aurorotate in the case of engine failure. The program CAMRAD is used for the blade modal analysis and CONMIN is used for the optimization. In addition, a linear approximation analysis involving Taylor series expansion has been used to reduce the analysis effort. The procedure contains a sensitivity analysis which consists of analytical derivatives of the objective function and the autorotational inertia constraint and central finite difference derivatives of the frequency constraints. Optimum designs have been obtained for both rectangular and tapered blades. Design variables include taper ratio, segment weights, and box beam dimensions. It is shown that even when starting with an acceptable baseline design, a significant amount of weight reduction is possible while satisfying all the constraints for both rectangular and tapered blades.

Minimum weight design of helicopter rotor blades with frequency constraints

NASA Technical Reports Server (NTRS)

Chattopadhyay, Aditi; Walsh, Joanne L.

1989-01-01

The minimum weight design of helicopter rotor blades subject to constraints on fundamental coupled flap-lag natural frequencies has been studied in this paper. A constraint has also been imposed on the minimum value of the blade autorotational inertia to ensure that the blade has sufficient inertia to autorotate in case of an engine failure. The program CAMRAD has been used for the blade modal analysis and the program CONMIN has been used for the optimization. In addition, a linear approximation analysis involving Taylor series expansion has been used to reduce the analysis effort. The procedure contains a sensitivity analysis which consists of analytical derivatives of the objective function and the autorotational inertia constraint and central finite difference derivatives of the frequency constraints. Optimum designs have been obtained for blades in vacuum with both rectangular and tapered box beam structures. Design variables include taper ratio, nonstructural segment weights and box beam dimensions. The paper shows that even when starting with an acceptable baseline design, a significant amount of weight reduction is possible while satisfying all the constraints for blades with rectangular and tapered box beams.

Optimization of aircraft seat cushion fire blocking layers

NASA Technical Reports Server (NTRS)

Kourtides, D. A.; Parker, J. A.; Ling, A. C.; Hovatter, W. R.

1983-01-01

This report describes work completed by the National Aeronautics and Space Administration - for the Federal Aviation Administration Technical Center. The purpose of this work was to examine the potential of fire blocking mechanisms for aircraft seat cushions in order to provide an optimized seat configuration with adequate fire protection and minimum weight. Aluminized thermally stable fabrics were found to provide adequate fire protection when used in conjunction with urethane foams, while maintaining minimum weight and cost penalty.

Minimum weight passive insulation requirements for hypersonic cruise vehicles.

NASA Technical Reports Server (NTRS)

Ardema, M. D.

1972-01-01

Analytical solutions are derived for two representative cases of the transient heat conduction equation to determine the minimum weight requirements for passive insulation systems of hypersonic cruise vehicles. The cases discussed are the wet wall case with the interior wall temperature held to that of the boiling point of the fuel throughout the flight, and the dry wall case where the heat transferred through the insulation is absorbed by the interior structure whose temperature is allowed to rise.

Wing Configuration Impact on Design Optimums for a Subsonic Passenger Transport

NASA Technical Reports Server (NTRS)

Wells, Douglas P.

2014-01-01

This study sought to compare four aircraft wing configurations at a conceptual level using a multi-disciplinary optimization (MDO) process. The MDO framework used was created by Georgia Institute of Technology and Virginia Polytechnic Institute and State University. They created a multi-disciplinary design and optimization environment that could capture the unique features of the truss-braced wing (TBW) configuration. The four wing configurations selected for the study were a low wing cantilever installation, a high wing cantilever, a strut-braced wing, and a single jury TBW. The mission that was used for this study was a 160 passenger transport aircraft with a design range of 2,875 nautical miles at the design payload, flown at a cruise Mach number of 0.78. This paper includes discussion and optimization results for multiple design objectives. Five design objectives were chosen to illustrate the impact of selected objective on the optimization result: minimum takeoff gross weight (TOGW), minimum operating empty weight, minimum block fuel weight, maximum start of cruise lift-to-drag ratio, and minimum start of cruise drag coefficient. The results show that the design objective selected will impact the characteristics of the optimized aircraft. Although minimum life cycle cost was not one of the objectives, TOGW is often used as a proxy for life cycle cost. The low wing cantilever had the lowest TOGW followed by the strut-braced wing.

White primer permits a corrosion-resistant coating of minimum weight

NASA Technical Reports Server (NTRS)

Albrecht, R. H.; Jensen, D. P.; Schnake, P.

1966-01-01

White primer for coating 2219 aluminum alloy supplies a base for a top coating of enamel. A formulation of pigments and vehicle results in a primer with high corrosion resistance and minimum film thickness.

Constructing Phylogenies.

ERIC Educational Resources Information Center

Bilardello, Nicholas; Valdes, Linda

1998-01-01

Introduces a method for constructing phylogenies using molecular traits and elementary graph theory. Discusses analyzing molecular data and using weighted graphs, minimum-weight spanning trees, and rooted cube phylogenies to display the data. (DDR)

The effect of atmospheric drag on the design of solar-cell power systems for low Earth orbit

NASA Technical Reports Server (NTRS)

Kyser, A. C.

1983-01-01

The feasibility of reducing the atmospheric drag of low orbit solar powered satellites by operating the solar-cell array in a minimum-drag attitude, rather than in the conventional Sun pointing attitude was determined. The weights of the solar array, the energy storage batteries, and the fuel required to overcome the drag of the solar array for a range of design life times in orbit were considered. The drag of the array was estimated by free molecule flow theory, and the system weights were calculated from unit weight estimates for 1990 technology. The trailing, minimum drag system was found to require 80% more solar array area, and 30% more battery capacity, the system weights for reasonable life times were dominated by the thruster fuel requirements.

Canyon transfer neutron absorber to fissile material ratio analysis. Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Clemmons, J.S.

1994-03-04

Waste tank fissile material and non-fissile material estimates are used to evaluate criticality safety for the existing sludge inventory and batches of sludge sent to Extended Sludge Processing (ESP). This report documents the weight ratios of several non-fissile waste constituents to fissile waste constituents from canyon reprocessing waste streams. Weight ratios of Fe, Mn, Al, Mi, and U-238 to fissile material are calculated from monthly loss estimates from the F and H Canyon Low Heat Waste (LHW) and High Heat Waste (HHW) streams. The monthly weight ratios for Fe, Mn and U-238 are then compared to calculated minimum safe weightmore » ratios. Documented minimum safe weight ratios for Al and Ni to fissile material are currently not available. Total mass data for the subject sludge constituents is provided along with scatter plots of the monthly weight ratios for each waste stream.« less

Reducing Bias and Increasing Precision by Adding Either a Pretest Measure of the Study Outcome or a Nonequivalent Comparison Group to the Basic Regression Discontinuity Design: An Example from Education

ERIC Educational Resources Information Center

Tang, Yang; Cook, Thomas D.; Kisbu-Sakarya, Yasemin

2015-01-01

Regression discontinuity design (RD) has been widely used to produce reliable causal estimates. Researchers have validated the accuracy of RD design using within study comparisons (Cook, Shadish & Wong, 2008; Cook & Steiner, 2010; Shadish et al, 2011). Within study comparisons examines the validity of a quasi-experiment by comparing its…

Quantitative Field Testing Rotylenchulus reniformis DNA from Metagenomic Samples Isolated Directly from Soil

PubMed Central

Showmaker, Kurt; Lawrence, Gary W.; Lu, Shien; Balbalian, Clarissa; Klink, Vincent P.

2011-01-01

A quantitative PCR procedure targeting the β-tubulin gene determined the number of Rotylenchulus reniformis Linford & Oliveira 1940 in metagenomic DNA samples isolated from soil. Of note, this outcome was in the presence of other soil-dwelling plant parasitic nematodes including its sister genus Helicotylenchus Steiner, 1945. The methodology provides a framework for molecular diagnostics of nematodes from metagenomic DNA isolated directly from soil. PMID:22194958

The Army Learning Organisation Questionnaire: Developing a Valid and Reliable Measure of Learning Organisation Characteristics

DTIC Science & Technology

2014-07-01

Telephone: 1300 333 362 Fax: (03) 9626 7999 © Commonwealth of Australia 2014 AR-016-028 July 2014 APPROVED FOR PUBLIC RELEASE... Pallant , 2007; Steiner & Norman, 2003). Validity is assessed using nomological network and its relationship to item construction using theoretical...alpha (Cronbach, 1951; De Vellis, 2003; Nunnally, 1978; Pallant , 2007; Streiner & Norman, 2003, 2008). Cronbach’s alpha builds on the utility of the

Multidisciplinary Biomarkers of Early Mammary Carcinogenesis

DTIC Science & Technology

2010-04-01

and breast cancer cells based on a single post- reatment measurement. Ratiometric methods have been used previously for ALA tudies in oral , bladder...6714, 6882–6888 2007. 14. E. Uzgiris, A. Sood, K. Bove, B. Grimmond, D. Lee, and S. Lomnes, “A multimodal contrast agent for preoperative MR...and R. A. Steiner, “Pho- todynamic detection of diseased axillary sentinel lymph node after oral application of aminolevulinic acid in patients with

Immunizations for Preterm Babies

MedlinePlus

... preterm babies with a minimum birth weight of 2000 grams (about 4 lbs., 6 oz.) be treated ... immunization schedule. If birth weight is less than 2000 g, the AAP recommends administering the hepatitis B ...

Panel flutter optimization by gradient projection

NASA Technical Reports Server (NTRS)

Pierson, B. L.

1975-01-01

A gradient projection optimal control algorithm incorporating conjugate gradient directions of search is described and applied to several minimum weight panel design problems subject to a flutter speed constraint. New numerical solutions are obtained for both simply-supported and clamped homogeneous panels of infinite span for various levels of inplane loading and minimum thickness. The minimum thickness inequality constraint is enforced by a simple transformation of variables.

14 CFR 29.321 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... load factor must be assumed to act normal to the longitudinal axis of the rotorcraft, and to be equal... from the design minimum weight to the design maximum weight; and (2) With any practical distribution of...

21 CFR 177.2415 - Poly(aryletherketone) resins.

Code of Federal Regulations, 2014 CFR

2014-04-01

..., and have a minimum weight-average molecular weight of 12,000, as determined by gel permeation...: Distilled water, 50 percent (by volume) ethanol in distilled water, 3 percent acetic acid in distilled water...

Survey of Occupational Noise Exposure in CF Personnel in Selected High-Risk Trades

DTIC Science & Technology

2003-11-01

peak, maximum level , minimum level , average sound level , time weighted average, dose, projected 8-hour dose, and upper limit time were measured for...10 4.4.2 Maximum Sound Level ...11 4.4.3 Minimum Sound Level

Lower bounds to energies for cusped-gaussian wavefunctions. [hydrogen atom ground state

NASA Technical Reports Server (NTRS)

Eaves, J. O.; Walsh, B. C.; Steiner, E.

1974-01-01

Calculations for the ground states of H, He, and Be, conducted by Steiner and Sykes (1972), show that the inclusion of a very small number of cusp functions can lead to a substantial enhancement of the quality of the Gaussian basis used in molecular wavefunction computations. The properties of the cusped-Gaussian basis are investigated by a calculation of lower bounds concerning the ground state energy of the hydrogen atom.

The Army Communications Objectives Measurement System (ACOMS): Survey Analysis Plan

DTIC Science & Technology

1988-05-01

Analysis Plan 12. PERSONAL AUTHOR(S) Gregory H. Gaertner (Westat) and Timothy W. Elig (ARI), editors 13a. TYPE OF REPORT 13b. TIME COVERED 14. DATE OF...such as those of Lavidge and Steiner (1961), McGuire (1969), and Fishbein and Azjen (1975). Fishbein and Azjen (1975) and Aaker (1975) present...for college, challenge and personal development, or patriotic service). Corresponding to these beliefs are evaluations of the importance of these

Konrad Adenauer’s Military Advisors

DTIC Science & Technology

1989-02-13

Ausgabe. Hans-Peter Schwarz and 45 Rudolf Morsey, Hg. Vol. 1, Briefe 1945-1947 hg. v. Hans Peter Mensing. Berlin: Siedler Verlag, 1983. Vol. 2, Briefe 1949...Dietrich, Rudolf Morsey and Hans-Peter Schwarz, ed. Quellen zur Geschichte des Parlarnentarismus und der politischen Partein. Bd. 3, Auftakt zur Ara...New York: Penguin, 1982. Steiner , Jirg. European Democracies. New York: Longman, 1986. Taylor, A.J.P. The Origens of the Second World War. 2d. ed. New

Equitable PERSTEMPO - The Challenge for Long-Term Deployed Armed Forces

DTIC Science & Technology

2003-04-07

substantial impact on the operational effectiveness of the Bundeswehr of the future.  Rudolf Scharping Former Federal Minister of Defense The vision...Federal Minister of Defense, Rudolf Scharping, initiated a new force planning by means of the so-called "Cornerstones Paper" on 01 June 2000, the Chief of...Annex 1) 77 Rainer Marr, Timea Biro, and Karin Steiner , Vereinbarkeit von Familie und Beruf des Soldaten – Moeglichkeiten und Grenzen einer

Beginning of the End: The Leadership of SS Obersturmbannfuehrer Jochen Peiper

DTIC Science & Technology

2004-06-17

of Rudolf Lehmann and Ralf Tiemann on the Leibstandarte are based on the Bundesarchiven (National Archives) in Koblenz and Freiburg in Germany...Hans Schmidt, Paul Hausser, Richard Schulze-Kossens, Rudolf Lehmann, and Ralf Tiemann. Some German sources are at odds with American sources, but that...or a constitution. Among the men who set up the first military training for the Waffen-SS were Felix Steiner and Cassius Freiherr (Baron) von

Spectral factorization of wavefields and wave operators

NASA Astrophysics Data System (ADS)

Rickett, James Edward

Spectral factorization is the problem of finding a minimum-phase function with a given power spectrum. Minimum phase functions have the property that they are causal with a causal (stable) inverse. In this thesis, I factor multidimensional systems into their minimum-phase components. Helical boundary conditions resolve any ambiguities over causality, allowing me to factor multi-dimensional systems with conventional one-dimensional spectral factorization algorithms. In the first part, I factor passive seismic wavefields recorded in two-dimensional spatial arrays. The result provides an estimate of the acoustic impulse response of the medium that has higher bandwidth than autocorrelation-derived estimates. Also, the function's minimum-phase nature mimics the physics of the system better than the zero-phase autocorrelation model. I demonstrate this on helioseismic data recorded by the satellite-based Michelson Doppler Imager (MDI) instrument, and shallow seismic data recorded at Long Beach, California. In the second part of this thesis, I take advantage of the stable-inverse property of minimum-phase functions to solve wave-equation partial differential equations. By factoring multi-dimensional finite-difference stencils into minimum-phase components, I can invert them efficiently, facilitating rapid implicit extrapolation without the azimuthal anisotropy that is observed with splitting approximations. The final part of this thesis describes how to calculate diagonal weighting functions that approximate the combined operation of seismic modeling and migration. These weighting functions capture the effects of irregular subsurface illumination, which can be the result of either the surface-recording geometry, or focusing and defocusing of the seismic wavefield as it propagates through the earth. Since they are diagonal, they can be easily both factored and inverted to compensate for uneven subsurface illumination in migrated images. Experimental results show that applying these weighting functions after migration leads to significantly improved estimates of seismic reflectivity.

Firefighter's compressed air breathing system pressure vessel development program

NASA Technical Reports Server (NTRS)

Beck, E. J.

1974-01-01

The research to design, fabricate, test, and deliver a pressure vessel for the main component in an improved high-performance firefighter's breathing system is reported. The principal physical and performance characteristics of the vessel which were required are: (1) maximum weight of 9.0 lb; (2) maximum operating pressure of 4500 psig (charge pressure of 4000 psig); (3) minimum contained volume of 280 in. 3; (4) proof pressure of 6750 psig; (5) minimum burst pressure of 9000 psig following operational and service life; and (6) a minimum service life of 15 years. The vessel developed to fulfill the requirements described was completely sucessful, i.e., every category of performence was satisfied. The average weight of the vessel was found to be about 8.3 lb, well below the 9.0 lb specification requirement.

On the Minimum Induced Drag of Wings

NASA Technical Reports Server (NTRS)

Bowers, Albion H.

2015-01-01

Birds do not require the use of vertical tails. They do not appear to have any mechanism by which to control their yaw. As an example the albatross is notable in this regard. The authors believe this is possible because of a unique adaptation by which there exists a triple-optimal solution that provides the maximum aerodynamic efficiency, the minimum structural weight, and it provides for coordination of control in roll and yaw. Until now, this solution has eluded researchers, and remained unknown. Here it is shown that the correct specification of spanload provides for all three solutions at once, maximum aerodynamic efficiency, minimum structural weight, and coordinated control. The implications of this result has far reaching effects on the design of aircraft, as well as dramatic efficiency improvement.

Minimum Variance Distortionless Response Beamformer with Enhanced Nulling Level Control via Dynamic Mutated Artificial Immune System

PubMed Central

Kiong, Tiong Sieh; Salem, S. Balasem; Paw, Johnny Koh Siaw; Sankar, K. Prajindra

2014-01-01

In smart antenna applications, the adaptive beamforming technique is used to cancel interfering signals (placing nulls) and produce or steer a strong beam toward the target signal according to the calculated weight vectors. Minimum variance distortionless response (MVDR) beamforming is capable of determining the weight vectors for beam steering; however, its nulling level on the interference sources remains unsatisfactory. Beamforming can be considered as an optimization problem, such that optimal weight vector should be obtained through computation. Hence, in this paper, a new dynamic mutated artificial immune system (DM-AIS) is proposed to enhance MVDR beamforming for controlling the null steering of interference and increase the signal to interference noise ratio (SINR) for wanted signals. PMID:25003136

Minimum variance distortionless response beamformer with enhanced nulling level control via dynamic mutated artificial immune system.

PubMed

Kiong, Tiong Sieh; Salem, S Balasem; Paw, Johnny Koh Siaw; Sankar, K Prajindra; Darzi, Soodabeh

2014-01-01

In smart antenna applications, the adaptive beamforming technique is used to cancel interfering signals (placing nulls) and produce or steer a strong beam toward the target signal according to the calculated weight vectors. Minimum variance distortionless response (MVDR) beamforming is capable of determining the weight vectors for beam steering; however, its nulling level on the interference sources remains unsatisfactory. Beamforming can be considered as an optimization problem, such that optimal weight vector should be obtained through computation. Hence, in this paper, a new dynamic mutated artificial immune system (DM-AIS) is proposed to enhance MVDR beamforming for controlling the null steering of interference and increase the signal to interference noise ratio (SINR) for wanted signals.

Performance of transonic fan stage with weight flow per unit annulus area of 178 kilograms per second per square meter (6.5(lb/sec)/(sq ft))

NASA Technical Reports Server (NTRS)

Moore, R. D.; Urasek, D. C.; Kovich, G.

1973-01-01

The overall and blade-element performances are presented over the stable flow operating range from 50 to 100 percent of design speed. Stage peak efficiency of 0.834 was obtained at a weight flow of 26.4 kg/sec (58.3 lb/sec) and a pressure ratio of 1.581. The stall margin for the stage was 7.5 percent based on weight flow and pressure ratio at stall and peak efficiency conditions. The rotor minimum losses were approximately equal to design except in the blade vibration damper region. Stator minimum losses were less than design except in the tip and damper regions.

A method for determining optimum phasing of a multiphase propulsion system for a single-stage vehicle with linearized inert weight

NASA Technical Reports Server (NTRS)

Martin, J. A.

1974-01-01

A general analytical treatment is presented of a single-stage vehicle with multiple propulsion phases. A closed-form solution for the cost and for the performance and a derivation of the optimal phasing of the propulsion are included. Linearized variations in the inert weight elements are included, and the function to be minimized can be selected. The derivation of optimal phasing results in a set of nonlinear algebraic equations for optimal fuel volumes, for which a solution method is outlined. Three specific example cases are analyzed: minimum gross lift-off weight, minimum inert weight, and a minimized general function for a two-phase vehicle. The results for the two-phase vehicle are applied to the dual-fuel rocket. Comparisons with single-fuel vehicles indicate that dual-fuel vehicles can have lower inert weight either by development of a dual-fuel engine or by parallel burning of separate engines from lift-off.

Weighted minimum-norm source estimation of magnetoencephalography utilizing the temporal information of the measured data

NASA Astrophysics Data System (ADS)

Iwaki, Sunao; Ueno, Shoogo

1998-06-01

The weighted minimum-norm estimation (wMNE) is a popular method to obtain the source distribution in the human brain from magneto- and electro- encephalograpic measurements when detailed information about the generator profile is not available. We propose a method to reconstruct current distributions in the human brain based on the wMNE technique with the weighting factors defined by a simplified multiple signal classification (MUSIC) prescanning. In this method, in addition to the conventional depth normalization technique, weighting factors of the wMNE were determined by the cost values previously calculated by a simplified MUSIC scanning which contains the temporal information of the measured data. We performed computer simulations of this method and compared it with the conventional wMNE method. The results show that the proposed method is effective for the reconstruction of the current distributions from noisy data.

Intercooler cooling-air weight flow and pressure drop for minimum drag loss

NASA Technical Reports Server (NTRS)

Reuter, J George; Valerino, Michael F

1944-01-01

An analysis has been made of the drag losses in airplane flight of cross-flow plate and tubular intercoolers to determine the cooling-air weight flow and pressure drop that give a minimum drag loss for any given cooling effectiveness and, thus, a maximum power-plant net gain due to charge-air cooling. The drag losses considered in this analysis are those due to (1) the extra drag imposed on the airplane by the weight of the intercooler, its duct, and its supports and (2) the drag sustained by the cooling air in flowing through the intercooler and its duct. The investigation covers a range of conditions of altitude, airspeed, lift-drag ratio, supercharger-pressure ratio, and supercharger adiabatic efficiency. The optimum values of cooling air pressure drop and weight flow ratio are tabulated. Curves are presented to illustrate the results of the analysis.

Compliant Walker

NASA Technical Reports Server (NTRS)

Kerley, James J.; Eklund, Wayne; Crane, Alan

1992-01-01

Walker supports person with limited use of legs and back. Enables person to stand upright, move with minimum load, and rest at will taking weight off legs. Consists of wheeled frame with body harness connected compliantly to side structures. Harness supports wearer upright when wearer relaxes and takes weight off lower extremities. Assumes partial to full body weight at user's discretion.

14 CFR 29.49 - Performance at minimum operating speed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... minimum operating speed. (a) For each Category A helicopter, the hovering performance must be determined... helicopter, the hovering performance must be determined over the ranges of weight, altitude, and temperature...) The helicopter in ground effect at a height consistent with normal takeoff procedures. (c) For each...

14 CFR 29.49 - Performance at minimum operating speed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... minimum operating speed. (a) For each Category A helicopter, the hovering performance must be determined... helicopter, the hovering performance must be determined over the ranges of weight, altitude, and temperature...) The helicopter in ground effect at a height consistent with normal takeoff procedures. (c) For each...

14 CFR 29.49 - Performance at minimum operating speed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... minimum operating speed. (a) For each Category A helicopter, the hovering performance must be determined... helicopter, the hovering performance must be determined over the ranges of weight, altitude, and temperature...) The helicopter in ground effect at a height consistent with normal takeoff procedures. (c) For each...

14 CFR 23.77 - Balked landing.

Code of Federal Regulations, 2012 CFR

2012-01-01

... of more than 6,000 pounds maximum weight and each normal, utility, and acrobatic category turbine... movement of the power controls from minimum flight-idle position; (2) The landing gear extended; (3) The... of movement of the power controls from the minimum flight idle position; (2) Landing gear extended...

Military Enlistment of Hispanic Youth. Obstacles and Opportunities

DTIC Science & Technology

2009-01-01

Weight, by Service, Height, and Gender . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 2.13. Allowable Body Fat Measurements, by Gender and...has higher minimum weight standards, as seen in Table 2.12. Applicants who exceed the maximum allowed weight are given a body- fat measurement to...determine if they exceed the allowable body- fat standards, as shown in Table 2.13. Despite having the most lenient weight standards, the Marine Corps has

Minimum Expected Risk Estimation for Near-neighbor Classification

DTIC Science & Technology

2006-04-01

We consider the problems of class probability estimation and classification when using near-neighbor classifiers, such as k-nearest neighbors ( kNN ...estimate for weighted kNN classifiers with different prior information, for a broad class of risk functions. Theory and simulations show how significant...the difference is compared to the standard maximum likelihood weighted kNN estimates. Comparisons are made with uniform weights, symmetric weights

Application of multivariable search techniques to structural design optimization

NASA Technical Reports Server (NTRS)

Jones, R. T.; Hague, D. S.

1972-01-01

Multivariable optimization techniques are applied to a particular class of minimum weight structural design problems: the design of an axially loaded, pressurized, stiffened cylinder. Minimum weight designs are obtained by a variety of search algorithms: first- and second-order, elemental perturbation, and randomized techniques. An exterior penalty function approach to constrained minimization is employed. Some comparisons are made with solutions obtained by an interior penalty function procedure. In general, it would appear that an interior penalty function approach may not be as well suited to the class of design problems considered as the exterior penalty function approach. It is also shown that a combination of search algorithms will tend to arrive at an extremal design in a more reliable manner than a single algorithm. The effect of incorporating realistic geometrical constraints on stiffener cross-sections is investigated. A limited comparison is made between minimum weight cylinders designed on the basis of a linear stability analysis and cylinders designed on the basis of empirical buckling data. Finally, a technique for locating more than one extremal is demonstrated.

Effect of Multiple Simultaneous Vaccines on Polio Seroresponse and Associated Health Outcomes

DTIC Science & Technology

2015-01-01

Broderick M. Steven Oberste Deborah Moore Sandra Romero-Steiner Christian J. Hansen Dennis J. Faix Report No. 13-53 The views expressed in...michael.broderick@med.navy.mil (M.P. Broderick ). 1 Current address: Office of Public Health Preparedness and Response, CDC, tlanta, GA 30333, USA. ttp...titers examined were those of polio, not of other vaccines givenM.P. Broderick et al. / V utcomes were associated with receipt of the same vaccinations

Moon phase at the dates of birth and decease of anthroposophic pioneers.

PubMed

Verhulst, J

2000-04-01

Early adherents of Rudolf Steiner, the founder of the anthroposophical movement, tend to be born and to die during the dark half of the lunar month. There is significant correlation (P = 0.03) between the distributions of the lunar elongation at birth and at decease. However, this correlation does not operate at the level of individuals, suggesting that the effects of birth date and death date are statistically independent. Copyright 2000 Harcourt Publishers Ltd.

The Cut of the Scythe

DTIC Science & Technology

1988-06-03

Adolf Hitler, the German dictator, however, had different ideas. His Wehrmecht Adjutant, Colonel Rudolf Schmudt 2 , discussed the Fuehrer’s desire...fl A,- 1.. 4Wr uCCe a A ft nha Zf iao zar *s*wft 194I (Wiesbaden: Franz Steiner Yerleg GMBh, 1957), p. 9. 2Rudolf Schmunt vas born on Auguot 13, 1896...of Chief, Army Personnel Office. General of the Infantry, Rudolf Schmundt died from his wounds on October 10, 1944, In a field hospital at Ratzeburg

Development of a weight/sizing design synthesis computer program. Volume 1: Program formulation

NASA Technical Reports Server (NTRS)

Garrison, J. M.

1973-01-01

The development of a weight/sizing design synthesis methodology for use in support of the main line space shuttle program is discussed. The methodology has a minimum number of data inputs and quick turn around capabilities. The methodology makes it possible to: (1) make weight comparisons between current shuttle configurations and proposed changes, (2) determine the effects of various subsystems trades on total systems weight, and (3) determine the effects of weight on performance and performance on weight.

DESIGN OF MINIMUM-WEIGHT DIFFUSION BATTERIES

EPA Science Inventory

Until recently, the measurement of particle sizes in aerosols was largely a laboratory exercise. Currently, however, particulates in the atmosphere and in the industrial exhaust gases are being monitored extensively in the field. While the weight and volume of laboratory apparatu...

46 CFR 164.023-13 - Production tests and inspections.

Code of Federal Regulations, 2011 CFR

2011-10-01

... Constant Rate of Traverse tensile testing machine, capable of initial clamp separation of ten inches and a... the acceptance testing values but not less than the performance minimums. (2) Length/weight values must be within 5 percent of the acceptance testing values but not less than the performance minimums...

40 CFR 180.960 - Polymers; exemptions from the requirement of a tolerance.

Code of Federal Regulations, 2014 CFR

2014-07-01

...-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six...-hydroxypoly(oxyethylene)poly (oxypropylene) poly(oxyethylene) block copolymer; the minimum poly(oxypropylene... weight (in amu), 900,000 62386-95-2 Monophosphate ester of the block copolymer α-hydro-ω-hydroxypoly...

Optimal dual-fuel propulsion for minimum inert weight or minimum fuel cost

NASA Technical Reports Server (NTRS)

Martin, J. A.

1973-01-01

An analytical investigation of single-stage vehicles with multiple propulsion phases has been conducted with the phasing optimized to minimize a general cost function. Some results are presented for linearized sizing relationships which indicate that single-stage-to-orbit, dual-fuel rocket vehicles can have lower inert weight than similar single-fuel rocket vehicles and that the advantage of dual-fuel vehicles can be increased if a dual-fuel engine is developed. The results also indicate that the optimum split can vary considerably with the choice of cost function to be minimized.

16 CFR 303.43 - Fiber content tolerances.

Code of Federal Regulations, 2010 CFR

2010-01-01

... as to fiber content percentages if the percentages by weight of any fibers present in the total fiber... stated on the label in excess of 3 percent of the total fiber weight of the product. For example, where... fiber present may vary from a minimum of 37 percent of the total fiber weight of such product to a...

21 CFR 177.1637 - Poly(oxy-1,2-ethanediyloxycarbonyl-2,6-naphthalenediylcarbonyl) resins.

Code of Federal Regulations, 2014 CFR

2014-04-01

... per cubic centimeter. (2) Inherent viscosity. The finished food-contact article shall have a minimum inherent viscosity of 0.55 deciliter per gram in a solution of 0.1 gram of polymer in 100 milliliters of a 25/40/35 (weight/weight/weight) solution of p-chlorophenol/tetrachloroethane/phenol. The viscosity is...

Structural optimization for joined-wing synthesis

NASA Technical Reports Server (NTRS)

Gallman, John W.; Kroo, Ilan M.

1992-01-01

The differences between fully stressed and minimum-weight joined-wing structures are identified, and these differences are quantified in terms of weight, stress, and direct operating cost. A numerical optimization method and a fully stressed design method are used to design joined-wing structures. Both methods determine the sizes of 204 structural members, satisfying 1020 stress constraints and five buckling constraints. Monotonic splines are shown to be a very effective way of linking spanwise distributions of material to a few design variables. Both linear and nonlinear analyses are employed to formulate the buckling constraints. With a constraint on buckling, the fully stressed design is shown to be very similar to the minimum-weight structure. It is suggested that a fully stressed design method based on nonlinear analysis is adequate for an aircraft optimization study.

The intestinal microbiota composition and weight development in children: the KOALA Birth Cohort Study.

PubMed

Scheepers, L E J M; Penders, J; Mbakwa, C A; Thijs, C; Mommers, M; Arts, I C W

2015-01-01

To investigate whether the intestinal microbiota composition in early infancy is associated with subsequent weight development in children. Analyses were conducted within the KOALA Birth Cohort Study (n = 2834). This cohort originates from two recruitments groups: pregnant women with a conventional lifestyle (no selection based on lifestyle) and pregnant women recruited through alternative channels (organic shops, anthroposophic clinicians/midwives, Steiner schools and relevant magazines). From 909 one-month-old infants, fecal samples were collected and analyzed by quantitative PCR targeting bifidobacteria, Bacteroides fragilis group, Clostridium difficile, Escherichia coli, Lactobacilli and total bacteria counts. Between the ages of 1 and 10 years, parent-reported weight and height was collected at 7 time points. Age- and gender-standardized body mass index (BMI) z-scores were calculated. Data were analyzed using generalized estimating equation. Colonization with B. fragilis group was borderline significantly associated with a higher BMI z-score of 0.15 (95% confidence interval (CI): -0.02 to 0.31), in the conventional subcohort. After stratification for fiber intake (P(forinteraction) = 0.003), colonization with B. fragilis group was associated with a 0.34 higher BMI z-score among children with a low-fiber intake in this subcohort (95% CI: 0.17-0.53). Higher counts among colonized children were positively associated with BMI z-score only in children within the conventional subcohort and a high-fiber diet (BMI z-score 0.08; 95% CI: 0.01-0.14), but inversely associated in children with a low-fiber diet (BMI z-score -0.05; 95% CI: -0.10 to 0.00), and in children recruited through alternative channels (BMI z-score -0.10; 95% CI: -0.17 to -0.03). The other bacteria were not associated with BMI z-scores, regardless of subcohort. Using a targeted approach, we conclude that the intestinal microbiota, particularly the B. fragilis group, is associated with childhood weight development. To identify the potential impact of additional bacterial taxa, further prospective studies applying an unconstrained in-depth characterization of the microbiota are needed.

A preliminary structural analysis of space-base living quarters modules to verify a weight-estimating technique

NASA Technical Reports Server (NTRS)

Grissom, D. S.; Schneider, W. C.

1971-01-01

The determination of a base line (minimum weight) design for the primary structure of the living quarters modules in an earth-orbiting space base was investigated. Although the design is preliminary in nature, the supporting analysis is sufficiently thorough to provide a reasonably accurate weight estimate of the major components that are considered to comprise the structural weight of the space base.

Physically weighted approximations of unsteady aerodynamic forces using the minimum-state method

NASA Technical Reports Server (NTRS)

Karpel, Mordechay; Hoadley, Sherwood Tiffany

1991-01-01

The Minimum-State Method for rational approximation of unsteady aerodynamic force coefficient matrices, modified to allow physical weighting of the tabulated aerodynamic data, is presented. The approximation formula and the associated time-domain, state-space, open-loop equations of motion are given, and the numerical procedure for calculating the approximation matrices, with weighted data and with various equality constraints are described. Two data weighting options are presented. The first weighting is for normalizing the aerodynamic data to maximum unit value of each aerodynamic coefficient. The second weighting is one in which each tabulated coefficient, at each reduced frequency value, is weighted according to the effect of an incremental error of this coefficient on aeroelastic characteristics of the system. This weighting yields a better fit of the more important terms, at the expense of less important ones. The resulting approximate yields a relatively low number of aerodynamic lag states in the subsequent state-space model. The formulation forms the basis of the MIST computer program which is written in FORTRAN for use on the MicroVAX computer and interfaces with NASA's Interaction of Structures, Aerodynamics and Controls (ISAC) computer program. The program structure, capabilities and interfaces are outlined in the appendices, and a numerical example which utilizes Rockwell's Active Flexible Wing (AFW) model is given and discussed.

Can community-based, low-cost antenatal care in the third trimester of pregnancy reduce the incidence of low birth weight newborns?

PubMed

Chaudhary, A K; Chaudhary, Asha; Tiwari, S C; Dwivedi, R

2012-06-01

To determine if community-based, low-cost interventions during third trimester of pregnancy can reduce the incidence of low birth weight babies. In a case control study, 290 pregnant women from a slum area were registered in the beginning of third trimester of pregnancy and provided full antenatal care comprising fortnightly check up, one IFA tablet daily, counseling for minimum one-and-a-half hour post-lunch rest in left lateral position, additional diet to ensure minimum 2,200 kcal per day, and management of clinical conditions, if any. An equal number of pregnant women belonging to the same slum area were registered as control who received routine antenatal services from the existing health care facilities. The birth weight of the babies in the two groups were recorded and compared. Test of significance and correlation coefficient were applied to the data. Mean birth weight of the babies of the Subjects was 2.76 kg (SD 0.39) compared to mean birth weight of 2.57 kg (SD 0.36) of the babies in the Control group. Incidence of low birth weight babies among subjects who consumed minimum 2,400 kcal per day, had one-and-a-half hour post-lunch rest in left lateral position and who consumed one tablet of IFA (100 mg iron and 5 mg folic acid) per day during the last trimester of pregnancy was lower (17.6 %) as compared with women in the Control group (36.2 %). The difference in the mean birth weight of newborns of the two groups was statistically significant (t = 2.52, p < 0.01). Incidence of low birth weight babies can be significantly reduced by providing simple, low-cost care to pregnant women during the last trimester of pregnancy in the community setting.

Meningococcal Disease in US Military Personnel Before and after Adoption of Conjugate Vaccine

DTIC Science & Technology

2015-02-01

after Adoption of Conjugate Vaccine Michael P. Broderick , Christopher Phillips, Dennis Faix Author affiliation: Naval Health Research Center, San Diego...1964–1998. Clin Infect Dis. 2002; 35:1376–81. http://dx.doi.org/10.1086/344273 8. Broderick MP, Faix DJ, Hansen CJ, Blair PJ. Trends in meningo...1988. p. 445–7. 10. Patel M, Romero-Steiner S, Broderick MP, Thomas CG, Plikaytis BD, Schmidt DS, et al. Persistence of serogroup C antibody

Acute Oral Toxicity of Trimethylolethane Trinitrate (TMETN) in Sprague- Dawley Rats

DTIC Science & Technology

1989-07-01

classification scheme of Hodge and Steiner, these results indicate that TMETN is a slightly toxic compound.1 20. ON-RIBUTION /AVAILABILITY OF ABSTRACT 21. ABSTRACT...the classification scheme of Hodge and Sterner, these results indcate that TMETN is a slightly toxic compound. KEY WORDS: Acute Oral Toxicit-y...Dawley rats and 1027.4 63.7 mg/kg in female Sprague-Dawley rats. These MLD values place TMETN in the "slightly toxic" range by the system of Hodge and

Center for Composites Manufacturing Science, Reliability and Maintainability Technology

DTIC Science & Technology

1992-01-30

Sei$uk I. Gü$eri Michael T. Klein Stuart H. Munson-McGee Azar Parvizi- Majidi R. Byron Pipes Dick J. Wilkins Program Coordinators: Azar Parvizi... Majidi c87> Stuart H. Munson-McGee crc-’s») Karl V. Steiner en) 30 January 1992 92-11298 U. S. Army Research Office Approved for Public Release...microstructure-property rela- tionships for 3-D woven composites (graduate student: B. LaMattina; advisor: A. Parvizi- Majidi ). • Construction of a cure

Combinatorial Problems of Applied Discrete Mathematics.

DTIC Science & Technology

1979-12-01

204 .I (30) 3. Steiner, Combinatorische Aufgabe, Z. Reine Angew. Math. 45 (1853) 18 1—182. (31) IC. Takeuchi, A table of difference sets generating...Assoc. Fr. Ay. Sd . 1 (1900) 122— 123; 2 (1901) 170—203. • (33) R.M. Wilson, Cyclotomy and difference fam ilies in elementary Abelian groups , 3. Number...the differe nt cliques containing either A or B. Let us first introduce the following notations. If A is a vertex in G, then 1(A) denotes the set of

Identification of Two Candidate Tumor Suppressor Genes on Chromosome 17p13.3: Assessment of Their Roles in Breast and Ovarian Carcinogenesis.

DTIC Science & Technology

1998-08-01

has also been reported in primitive neuroectodermal tumors (19), carcinoma of the cervix uteri (20), medulloblastoma, osteosarcoma (21), astrocytoma...Knudson, A. G., Jr. Oncogenes and tumor-suppressor genes. In: W. J. Hoskins, C. A. Perez, and R. C. Young (eds.), Principles and Practice of... Young , B. D., Nakayama, K., and Steiner, D. F. Processing of wild-type and mutant proinsulin-like growth factor-IA by subtilisin-related proprotein

Military Use of Women in Combat: An Historical Perspective.

DTIC Science & Technology

1979-03-01

jungle. rhe Viet Cong were adept at using women in recruiting and indoctrination roles. Being a matriarchal society the prestige of the women was...brought to bear in many ways to induce men to join. Donnell is quicc to point out that sexual allure is forbidden in that society and its use as a...J.C., Dec 1967 21. Steiner,Shaci, The Female Factor,. a Study f Women in fie Wstern European societies , p. 131, 247 to 249, G.P. Putnam’s Sons, 1977

The Role of Western Germany in West European Defense

DTIC Science & Technology

1966-04-08

Ralph. Modern German History. New York: E. P. Dutton & Co., Inc., 1964. (DD175 F5) 34. German Research Association. Germany: Franz Steiner Verlag Gmb...and Rudolf , Walter. This Germany. New York: New York Graphic Society Publishers, Ltd., 1954. (DD257 L42) 39. Heidenheimer, Arnold J. The Government...202-07, 243. 47. Lauder, K. H. A Brief Review of Science and Technoloc in Western Germany. London: HIISO, 1955. (Q18 G4G7) 48. Leonhardt, Rudolf Walter

76 FR 16653 - Petition for Exemption; Summary of Petition Received

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-24

.... (FWIA) is requesting relief from the requirement to provide minimum fuel supply on flight release forms in pounds or gallons. The exemption will enable FWIA to state the minimum fuel supply in the unit of measurement that is consistent with the aircraft fuel system and the company's weight and balance system. [FR...

14 CFR 27.49 - Performance at minimum operating speed.

Code of Federal Regulations, 2014 CFR

2014-01-01

... minimum operating speed. (a) For helicopters— (1) The hovering ceiling must be determined over the ranges...; (ii) The landing gear extended; and (iii) The helicopter in-ground effect at a height consistent with... must be at least— (i) For reciprocating engine powered helicopters, 4,000 feet at maximum weight with a...

14 CFR 27.49 - Performance at minimum operating speed.

Code of Federal Regulations, 2013 CFR

2013-01-01

... minimum operating speed. (a) For helicopters— (1) The hovering ceiling must be determined over the ranges...; (ii) The landing gear extended; and (iii) The helicopter in-ground effect at a height consistent with... must be at least— (i) For reciprocating engine powered helicopters, 4,000 feet at maximum weight with a...

14 CFR 27.49 - Performance at minimum operating speed.

Code of Federal Regulations, 2012 CFR

2012-01-01

... minimum operating speed. (a) For helicopters— (1) The hovering ceiling must be determined over the ranges...; (ii) The landing gear extended; and (iii) The helicopter in-ground effect at a height consistent with... must be at least— (i) For reciprocating engine powered helicopters, 4,000 feet at maximum weight with a...

40 CFR 180.960 - Polymers; exemptions from the requirement of a tolerance.

Code of Federal Regulations, 2013 CFR

2013-07-01

...-hydroxypoly (oxypropylene) and/or poly (oxyethylene) polymers where the alkyl chain contains a minimum of six... (oxypropylene) poly(oxyethylene) block copolymer; the minimum poly(oxypropylene) content is 27 moles and the... number average molecular weight (in amu), 900,000 62386-95-2 Monophosphate ester of the block copolymer α...

Three percent weight reduction is the minimum requirement to improve health hazards in obese and overweight people in Japan.

PubMed

Muramoto, Akiko; Matsushita, Madoka; Kato, Ayako; Yamamoto, Naoki; Koike, George; Nakamura, Masakazu; Numata, Takeyuki; Tamakoshi, Akiko; Tsushita, Kazuyo

2014-01-01

Adequate goal-setting is important in health counselling and treatment for obesity and overweight. We tried to determine the minimum weight reduction required for improvement of obesity-related risk factors and conditions in obese and overweight Japanese people, using a nationwide intervention programme database. Japanese men and women (n=3480; mean age±standard deviation [SD], 48.3±5.9 years; mean body mass index±SD, 27.7±2.5kgm(-2)) with "Obesity Disease" or "Metabolic Syndrome" participated in a 6-month lifestyle modification programme (specific health guidance) and underwent follow-up for 6 months thereafter. The relationship between percent weight reduction and changes in 11 parameters of obesity-related diseases were examined. Significant weight reduction was observed 6 months after the beginning of the programme, and it was maintained for 1 year. Concomitant improvements in parameters for obesity-related diseases were also observed. One-third of the subjects reduced their body weight by ≥3%. In the group exhibiting 1% to <3% weight reduction, plasma triglycerides (TG), low-density lipoprotein cholesterol (LDL-C), haemoglobin A1c (HbA1c), aspartate aminotransferase (AST), alanine aminotransferase (ALT) and γ-glutamyl transpeptidase (γ-GTP) decreased significantly, and high-density lipoprotein cholesterol (HDL-C) increased significantly compared to the control group (±1% weight change group). In addition to the improvements of these 7 parameters (out of 11), significant reductions in systolic blood pressure (SBP), diastolic blood pressure (DBP), fasting plasma glucose (FPG) and uric acid (UA) (total 11 of 11 parameters) were observed in the group with 3% to <5% weight reduction. In the group with ≥5% weight reduction, the same 11 parameters also improved as those in the group with 3% to <5% weight reduction. The 6-month lifestyle modification programme induced significant weight reduction and significant improvement of parameters of obesity-related diseases. All the measured obesity-related parameters were significantly improved in groups with 3% to <5% and ≥5% weight reduction. Based on these findings, the minimum weight reduction required for improvement of obesity-related risk factors or conditions is 3% in obese and overweight (by WHO classification) Japanese people. Copyright © 2013 Asian Oceanian Association for the Study of Obesity. Published by Elsevier Ltd. All rights reserved.

Weighting of Amplitude and Formant Rise Time Cues by School-Aged Children: A Mismatch Negativity Study

ERIC Educational Resources Information Center

Varghese, Peter; Kalashnikova, Marina; Burnham, Denis

2018-01-01

Purpose: An important skill in the development of speech perception is to apply optimal weights to acoustic cues so that phonemic information is recovered from speech with minimum effort. Here, we investigated the development of acoustic cue weighting of amplitude rise time (ART) and formant rise time (FRT) cues in children as measured by mismatch…

16 CFR Appendix to Part 460 - Exemptions

Code of Federal Regulations, 2011 CFR

2011-01-01

... relationship between R-value and density or weight per square foot are exempted from the requirements in §§ 460.12(b)(2) and 460.13(c)(1) that they disclose minimum weight per square foot for R-values listed on... sheets of the maximum weight per square foot for each R-value required to be listed. 46 FR 22179 (1981...

16 CFR Appendix to Part 460 - Exemptions

Code of Federal Regulations, 2010 CFR

2010-01-01

... relationship between R-value and density or weight per square foot are exempted from the requirements in §§ 460.12(b)(2) and 460.13(c)(1) that they disclose minimum weight per square foot for R-values listed on... sheets of the maximum weight per square foot for each R-value required to be listed. 46 FR 22179 (1981...

9 CFR 3.80 - Primary enclosures.

Code of Federal Regulations, 2011 CFR

2011-01-01

... must be designed and constructed of suitable materials so that they are structurally sound for the... primates are divided into six weight groups for determining minimum space requirements, except that all... in determining a nonhuman primate's weight group unless the animal is obviously unable to make normal...

9 CFR 3.80 - Primary enclosures.

Code of Federal Regulations, 2012 CFR

2012-01-01

... must be designed and constructed of suitable materials so that they are structurally sound for the... primates are divided into six weight groups for determining minimum space requirements, except that all... in determining a nonhuman primate's weight group unless the animal is obviously unable to make normal...

A recursive algorithm for the three-dimensional imaging of brain electric activity: Shrinking LORETA-FOCUSS.

PubMed

Liu, Hesheng; Gao, Xiaorong; Schimpf, Paul H; Yang, Fusheng; Gao, Shangkai

2004-10-01

Estimation of intracranial electric activity from the scalp electroencephalogram (EEG) requires a solution to the EEG inverse problem, which is known as an ill-conditioned problem. In order to yield a unique solution, weighted minimum norm least square (MNLS) inverse methods are generally used. This paper proposes a recursive algorithm, termed Shrinking LORETA-FOCUSS, which combines and expands upon the central features of two well-known weighted MNLS methods: LORETA and FOCUSS. This recursive algorithm makes iterative adjustments to the solution space as well as the weighting matrix, thereby dramatically reducing the computation load, and increasing local source resolution. Simulations are conducted on a 3-shell spherical head model registered to the Talairach human brain atlas. A comparative study of four different inverse methods, standard Weighted Minimum Norm, L1-norm, LORETA-FOCUSS and Shrinking LORETA-FOCUSS are presented. The results demonstrate that Shrinking LORETA-FOCUSS is able to reconstruct a three-dimensional source distribution with smaller localization and energy errors compared to the other methods.

Integrating aerodynamics and structures in the minimum weight design of a supersonic transport wing

NASA Technical Reports Server (NTRS)

Barthelemy, Jean-Francois M.; Wrenn, Gregory A.; Dovi, Augustine R.; Coen, Peter G.; Hall, Laura E.

1992-01-01

An approach is presented for determining the minimum weight design of aircraft wing models which takes into consideration aerodynamics-structure coupling when calculating both zeroth order information needed for analysis and first order information needed for optimization. When performing sensitivity analysis, coupling is accounted for by using a generalized sensitivity formulation. The results presented show that the aeroelastic effects are calculated properly and noticeably reduce constraint approximation errors. However, for the particular example selected, the error introduced by ignoring aeroelastic effects are not sufficient to significantly affect the convergence of the optimization process. Trade studies are reported that consider different structural materials, internal spar layouts, and panel buckling lengths. For the formulation, model and materials used in this study, an advanced aluminum material produced the lightest design while satisfying the problem constraints. Also, shorter panel buckling lengths resulted in lower weights by permitting smaller panel thicknesses and generally, by unloading the wing skins and loading the spar caps. Finally, straight spars required slightly lower wing weights than angled spars.

Markov Chain Monte Carlo Bayesian Learning for Neural Networks

NASA Technical Reports Server (NTRS)

Goodrich, Michael S.

2011-01-01

Conventional training methods for neural networks involve starting al a random location in the solution space of the network weights, navigating an error hyper surface to reach a minimum, and sometime stochastic based techniques (e.g., genetic algorithms) to avoid entrapment in a local minimum. It is further typically necessary to preprocess the data (e.g., normalization) to keep the training algorithm on course. Conversely, Bayesian based learning is an epistemological approach concerned with formally updating the plausibility of competing candidate hypotheses thereby obtaining a posterior distribution for the network weights conditioned on the available data and a prior distribution. In this paper, we developed a powerful methodology for estimating the full residual uncertainty in network weights and therefore network predictions by using a modified Jeffery's prior combined with a Metropolis Markov Chain Monte Carlo method.

Generalized minimum dominating set and application in automatic text summarization

NASA Astrophysics Data System (ADS)

Xu, Yi-Zhi; Zhou, Hai-Jun

2016-03-01

For a graph formed by vertices and weighted edges, a generalized minimum dominating set (MDS) is a vertex set of smallest cardinality such that the summed weight of edges from each outside vertex to vertices in this set is equal to or larger than certain threshold value. This generalized MDS problem reduces to the conventional MDS problem in the limiting case of all the edge weights being equal to the threshold value. We treat the generalized MDS problem in the present paper by a replica-symmetric spin glass theory and derive a set of belief-propagation equations. As a practical application we consider the problem of extracting a set of sentences that best summarize a given input text document. We carry out a preliminary test of the statistical physics-inspired method to this automatic text summarization problem.

Advancement of proprotor technology. Task 1: Design study summary. [aerodynamic concept of minimum size tilt proprotor research aircraft

NASA Technical Reports Server (NTRS)

1969-01-01

A tilt-proprotor proof-of-concept aircraft design study has been conducted. The results are presented. The ojective of the contract is to advance the state of proprotor technology through design studies and full-scale wind-tunnel tests. The specific objective is to conduct preliminary design studies to define a minimum-size tilt-proprotor research aircraft that can perform proof-of-concept flight research. The aircraft that results from these studies is a twin-engine, high-wing aircraft with 25-foot, three-bladed tilt proprotors mounted on pylons at the wingtips. Each pylon houses a Pratt and Whitney PT6C-40 engine with a takeoff rating of 1150 horsepower. Empty weight is estimated at 6876 pounds. The normal gross weight is 9500 pounds, and the maximum gross weight is 12,400 pounds.

Programs for analysis and resizing of complex structures. [computerized minimum weight design

NASA Technical Reports Server (NTRS)

Haftka, R. T.; Prasad, B.

1978-01-01

The paper describes the PARS (Programs for Analysis and Resizing of Structures) system. PARS is a user oriented system of programs for the minimum weight design of structures modeled by finite elements and subject to stress, displacement, flutter and thermal constraints. The system is built around SPAR - an efficient and modular general purpose finite element program, and consists of a series of processors that communicate through the use of a data base. An efficient optimizer based on the Sequence of Unconstrained Minimization Technique (SUMT) with an extended interior penalty function and Newton's method is used. Several problems are presented for demonstration of the system capabilities.

Motifs in triadic random graphs based on Steiner triple systems

NASA Astrophysics Data System (ADS)

Winkler, Marco; Reichardt, Jörg

2013-08-01

Conventionally, pairwise relationships between nodes are considered to be the fundamental building blocks of complex networks. However, over the last decade, the overabundance of certain subnetwork patterns, i.e., the so-called motifs, has attracted much attention. It has been hypothesized that these motifs, instead of links, serve as the building blocks of network structures. Although the relation between a network's topology and the general properties of the system, such as its function, its robustness against perturbations, or its efficiency in spreading information, is the central theme of network science, there is still a lack of sound generative models needed for testing the functional role of subgraph motifs. Our work aims to overcome this limitation. We employ the framework of exponential random graph models (ERGMs) to define models based on triadic substructures. The fact that only a small portion of triads can actually be set independently poses a challenge for the formulation of such models. To overcome this obstacle, we use Steiner triple systems (STSs). These are partitions of sets of nodes into pair-disjoint triads, which thus can be specified independently. Combining the concepts of ERGMs and STSs, we suggest generative models capable of generating ensembles of networks with nontrivial triadic Z-score profiles. Further, we discover inevitable correlations between the abundance of triad patterns, which occur solely for statistical reasons and need to be taken into account when discussing the functional implications of motif statistics. Moreover, we calculate the degree distributions of our triadic random graphs analytically.

Effect of clothing weight on body weight.

PubMed

Whigham, L D; Schoeller, D A; Johnson, L K; Atkinson, R L

2013-01-01

In clinical settings, it is common to measure weight of clothed patients and estimate a correction for the weight of clothing, but we can find no papers in the medical literature regarding the variability in clothing weight of adults with weather, season and gender. Fifty adults (35 women) were weighed four times during a 12-month period with and without clothing. Clothing weights were determined and regressed against minimum, maximum and average daily outdoor temperature. The average clothing weight (±s.d.) throughout the year was significantly greater in men than in women (1.2±0.3 vs 0.8±0.3 kg, P<0.0001). The average within-person minimum and the average within-person maximum clothing weights across the year were 0.9±0.2 and 1.5±0.4 kg for men, and 0.5±0.2 and 1.1±0.4 kg for women, respectively. The within-person s.d. in clothing weight was 0.3 kg for both men and women. Over the 55 °C range in the lowest to the highest outdoor temperatures, the regressions predicted a maximal change in clothing weight of only 0.4 kg in women and 0.6 kg in men. The clothing weight of men is significantly greater than that of women, but there is little variability throughout the year. Therefore, a clothing adjustment of approximately 0.8 kg for women and 1.2 kg for men is appropriate regardless of outdoor temperature.

14 CFR 27.321 - General.

Code of Federal Regulations, 2010 CFR

2010-01-01

... STANDARDS: NORMAL CATEGORY ROTORCRAFT Strength Requirements Flight Loads § 27.321 General. (a) The flight load factor must be assumed to act normal to the longitudinal axis of the rotorcraft, and to be equal... from the design minimum weight to the design maximum weight; and (2) With any practical distribution of...

48 CFR 652.242-72 - Shipping Instructions.

Code of Federal Regulations, 2012 CFR

2012-10-01

...) Each packing box shall be of solid construction in accordance with best commercial practices and.../3 of the width of the piece of lumber. Box shall be constructed with three-way corners and diagonal... the following table, dependent upon the weight of the contents: Weight of box and contents Minimum...

48 CFR 652.242-72 - Shipping Instructions.

Code of Federal Regulations, 2013 CFR

2013-10-01

...) Each packing box shall be of solid construction in accordance with best commercial practices and.../3 of the width of the piece of lumber. Box shall be constructed with three-way corners and diagonal... the following table, dependent upon the weight of the contents: Weight of box and contents Minimum...

48 CFR 652.242-72 - Shipping Instructions.

Code of Federal Regulations, 2014 CFR

2014-10-01

...) Each packing box shall be of solid construction in accordance with best commercial practices and.../3 of the width of the piece of lumber. Box shall be constructed with three-way corners and diagonal... the following table, dependent upon the weight of the contents: Weight of box and contents Minimum...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2012 CFR

2012-10-01

... 46 Shipping 7 2012-10-01 2012-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2014 CFR

2014-10-01

... 46 Shipping 7 2014-10-01 2014-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2011 CFR

2011-10-01

... 46 Shipping 7 2011-10-01 2011-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

46 CFR 189.35-13 - Master's responsibility.

Code of Federal Regulations, 2013 CFR

2013-10-01

... 46 Shipping 7 2013-10-01 2013-10-01 false Master's responsibility. 189.35-13 Section 189.35-13... AND CERTIFICATION Weight Handling Gear § 189.35-13 Master's responsibility. (a) The master of the... permitted to operate the weight handling gear. The master shall designate the operators. (5) A minimum...

40 CFR 63.11646 - What are my compliance requirements?

Code of Federal Regulations, 2012 CFR

2012-07-01

... with Method 29 must collect a minimum sample volume of 0.85 dry standard cubic meters (30 dry standard... weight measurement device, mass flow meter, or densitometer and volumetric flow meter to measure ore...) Measure the weight of concentrate (produced by electrowinning, Merrill Crowe process, gravity feed, or...

40 CFR 63.11646 - What are my compliance requirements?

Code of Federal Regulations, 2014 CFR

2014-07-01

... with Method 29 must collect a minimum sample volume of 0.85 dry standard cubic meters (30 dry standard... weight measurement device, mass flow meter, or densitometer and volumetric flow meter to measure ore...) Measure the weight of concentrate (produced by electrowinning, Merrill Crowe process, gravity feed, or...

40 CFR 63.11646 - What are my compliance requirements?

Code of Federal Regulations, 2011 CFR

2011-07-01

... with Method 29 must collect a minimum sample volume of 0.85 dry standard cubic meters (30 dry standard... weight measurement device, mass flow meter, or densitometer and volumetric flow meter to measure ore...) Measure the weight of concentrate (produced by electrowinning, Merrill Crowe process, gravity feed, or...

40 CFR 63.11646 - What are my compliance requirements?

Code of Federal Regulations, 2013 CFR

2013-07-01

... with Method 29 must collect a minimum sample volume of 0.85 dry standard cubic meters (30 dry standard... weight measurement device, mass flow meter, or densitometer and volumetric flow meter to measure ore...) Measure the weight of concentrate (produced by electrowinning, Merrill Crowe process, gravity feed, or...

14 CFR 23.77 - Balked landing.

Code of Federal Regulations, 2013 CFR

2013-01-01

... reciprocating engine-powered and single engine turbine powered airplane of more than 6,000 pounds maximum weight, and multiengine turbine engine-powered airplane of 6,000 pounds or less maximum weight in the normal... of movement of the power controls from minimum flight-idle position; (2) The landing gear extended...

14 CFR 23.77 - Balked landing.

Code of Federal Regulations, 2014 CFR

2014-01-01

... reciprocating engine-powered and single engine turbine powered airplane of more than 6,000 pounds maximum weight, and multiengine turbine engine-powered airplane of 6,000 pounds or less maximum weight in the normal... of movement of the power controls from minimum flight-idle position; (2) The landing gear extended...

21 CFR 172.260 - Oxidized polyethylene.

Code of Federal Regulations, 2010 CFR

2010-04-01

... HUMAN CONSUMPTION (CONTINUED) FOOD ADDITIVES PERMITTED FOR DIRECT ADDITION TO FOOD FOR HUMAN CONSUMPTION... polyethylene has a minimum number average molecular weight of 1,200, as determined by high temperature vapor pressure osmometry; contains a maximum of 5 percent by weight of total oxygen; and has an acid value of 9...

Study on multimodal transport route under low carbon background

NASA Astrophysics Data System (ADS)

Liu, Lele; Liu, Jie

2018-06-01

Low-carbon environmental protection is the focus of attention around the world, scientists are constantly researching on production of carbon emissions and living carbon emissions. However, there is little literature about multimodal transportation based on carbon emission at home and abroad. Firstly, this paper introduces the theory of multimodal transportation, the multimodal transport models that didn't consider carbon emissions and consider carbon emissions are analyzed. On this basis, a multi-objective programming 0-1 programming model with minimum total transportation cost and minimum total carbon emission is proposed. The idea of weight is applied to Ideal point method for solving problem, multi-objective programming is transformed into a single objective function. The optimal solution of carbon emission to transportation cost under different weights is determined by a single objective function with variable weights. Based on the model and algorithm, an example is given and the results are analyzed.

An Effective Evolutionary Approach for Bicriteria Shortest Path Routing Problems

NASA Astrophysics Data System (ADS)

Lin, Lin; Gen, Mitsuo

Routing problem is one of the important research issues in communication network fields. In this paper, we consider a bicriteria shortest path routing (bSPR) model dedicated to calculating nondominated paths for (1) the minimum total cost and (2) the minimum transmission delay. To solve this bSPR problem, we propose a new multiobjective genetic algorithm (moGA): (1) an efficient chromosome representation using the priority-based encoding method; (2) a new operator of GA parameters auto-tuning, which is adaptively regulation of exploration and exploitation based on the change of the average fitness of parents and offspring which is occurred at each generation; and (3) an interactive adaptive-weight fitness assignment mechanism is implemented that assigns weights to each objective and combines the weighted objectives into a single objective function. Numerical experiments with various scales of network design problems show the effectiveness and the efficiency of our approach by comparing with the recent researches.

Comparison of nonrigid and semirigid airships

NASA Technical Reports Server (NTRS)

Stapfer,

1922-01-01

One of the main subjects of airship science consists in establishing cooperation between two vertical forces, the buoyancy of the air and the attraction of gravity. The mechanism for establishing this cooperation must have the minimum weight and offer the minimum head resistance. Starting with this principle, let us consider what improvements can be made in the present type of non-rigid airships.

Journal of Chinese Society of Astronautics (Selected Articles),

DTIC Science & Technology

1983-03-10

Graphics Disclaimer...................... ..... .. . .. .. . . ... Calculation of Minimum Entry Heat Transfer Shape of a Space * Vehicle , by, Zhou Qi...the best quality copy available. ..- ii CALCULATION OF MINIMUM ENTRY HEAT TRANSFER SHAPE OF A SPACE VEHICLE Zhou Qi cheng ABSTRACT This paper dealt...entry heat transfer shape under specified fineness ratio and total vehicle weight conditions could be obtained using a variational method. Finally, the

Optimal short-range trajectories for helicopters

DOE Office of Scientific and Technical Information (OSTI.GOV)

Slater, G.L.; Erzberger, H.

1982-12-01

An optimal flight path algorithm using a simplified altitude state model and a priori climb cruise descent flight profile was developed and applied to determine minimum fuel and minimum cost trajectories for a helicopter flying a fixed range trajectory. In addition, a method was developed for obtaining a performance model in simplified form which is based on standard flight manual data and which is applicable to the computation of optimal trajectories. The entire performance optimization algorithm is simple enough that on line trajectory optimization is feasible with a relatively small computer. The helicopter model used is the Silorsky S-61N. Themore » results show that for this vehicle the optimal flight path and optimal cruise altitude can represent a 10% fuel saving on a minimum fuel trajectory. The optimal trajectories show considerable variability because of helicopter weight, ambient winds, and the relative cost trade off between time and fuel. In general, reasonable variations from the optimal velocities and cruise altitudes do not significantly degrade the optimal cost. For fuel optimal trajectories, the optimum cruise altitude varies from the maximum (12,000 ft) to the minimum (0 ft) depending on helicopter weight.« less

Improved superficial brain hemorrhage visualization in susceptibility weighted images by constrained minimum intensity projection

NASA Astrophysics Data System (ADS)

Castro, Marcelo A.; Pham, Dzung L.; Butman, John

2016-03-01

Minimum intensity projection is a technique commonly used to display magnetic resonance susceptibility weighted images, allowing the observer to better visualize hemorrhages and vasculature. The technique displays the minimum intensity in a given projection within a thick slab, allowing different connectivity patterns to be easily revealed. Unfortunately, the low signal intensity of the skull within the thick slab can mask superficial tissues near the skull base and other regions. Because superficial microhemorrhages are a common feature of traumatic brain injury, this effect limits the ability to proper diagnose and follow up patients. In order to overcome this limitation, we developed a method to allow minimum intensity projection to properly display superficial tissues adjacent to the skull. Our approach is based on two brain masks, the largest of which includes extracerebral voxels. The analysis of the rind within both masks containing the actual brain boundary allows reclassification of those voxels initially missed in the smaller mask. Morphological operations are applied to guarantee accuracy and topological correctness, and the mean intensity within the mask is assigned to all outer voxels. This prevents bone from dominating superficial regions in the projection, enabling superior visualization of cortical hemorrhages and vessels.

78 FR 16661 - Determination Under the Textile and Apparel Commercial Availability Provision of the Dominican...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-18

... fabric). Overall weight: 287-351 grams per square meter. Overall width: Selvedge: 150.4-154.4 cm; Minimum... per cm x 43-45 picks per cm Weight: 121.5-148.5 grams per square meter Width: Selvedge: 150.4-154.4 cm... yarns: filament Knitting gauge: 27-29 Weight: 140.4-171.6 grams per square meter Width: Selvedge: 150.4...

The interaction of the outflow with the molecular disk in the Active Galactic Nucleus of NGC 6951

NASA Astrophysics Data System (ADS)

May, D.; Steiner, J. E.; Ricci, T. V.; Menezes, R. B.; Andrade, I. S.

2015-02-01

Context: we present a study of the central 200 pc of NGC 6951, in the optical and NIR, taken with the Gemini North Telescope integral field spectrographs, with resolution of ~ 0''.1 Methods: we used a set of image processing techniques, as the filtering of high spatial and spectral frequencies, Richardson-Lucy deconvolution and PCA Tomography (Steiner et al. 2009) to map the distribution and kinematics of the emission lines. Results: we found a thick molecular disk, with the ionization cone highly misaligned.

Environmentally friendly education: A passive solar, straw-bale school

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stone, L.; Dickinson, J.

The Waldorf students in the Roaring Fork Valley of western Colorado are learning their reading, writing and arithmetic in the cozy confines of a solar heated, naturally lit, straw-bale school. The Waldorf education system, founded in 1919 by Austrian Rudolph Steiner, stresses what's appropriate for the kids, not what's easiest to teach. In constructing a new school, the Waldorf community wanted a building that would reflect their philosophy. There was a long list of requirements: natural, energy efficient, light, warm, alive, and earthy. Passive solar straw-bale construction brought together all those qualities.

Optimization of Operating Parameters for Minimum Mechanical Specific Energy in Drilling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hamrick, Todd

2011-01-01

Efficiency in drilling is measured by Mechanical Specific Energy (MSE). MSE is the measure of the amount of energy input required to remove a unit volume of rock, expressed in units of energy input divided by volume removed. It can be expressed mathematically in terms of controllable parameters; Weight on Bit, Torque, Rate of Penetration, and RPM. It is well documented that minimizing MSE by optimizing controllable factors results in maximum Rate of Penetration. Current methods for computing MSE make it possible to minimize MSE in the field only through a trial-and-error process. This work makes it possible to computemore » the optimum drilling parameters that result in minimum MSE. The parameters that have been traditionally used to compute MSE are interdependent. Mathematical relationships between the parameters were established, and the conventional MSE equation was rewritten in terms of a single parameter, Weight on Bit, establishing a form that can be minimized mathematically. Once the optimum Weight on Bit was determined, the interdependent relationship that Weight on Bit has with Torque and Penetration per Revolution was used to determine optimum values for those parameters for a given drilling situation. The improved method was validated through laboratory experimentation and analysis of published data. Two rock types were subjected to four treatments each, and drilled in a controlled laboratory environment. The method was applied in each case, and the optimum parameters for minimum MSE were computed. The method demonstrated an accurate means to determine optimum drilling parameters of Weight on Bit, Torque, and Penetration per Revolution. A unique application of micro-cracking is also presented, which demonstrates that rock failure ahead of the bit is related to axial force more than to rotation speed.« less

The theory of maximally and minimally even sets, the one- dimensional antiferromagnetic Ising model, and the continued fraction compromise of musical scales

NASA Astrophysics Data System (ADS)

Douthett, Elwood (Jack) Moser, Jr.

1999-10-01

Cyclic configurations of white and black sites, together with convex (concave) functions used to weight path length, are investigated. The weights of the white set and black set are the sums of the weights of the paths connecting the white sites and black sites, respectively, and the weight between sets is the sum of the weights of the paths that connect sites opposite in color. It is shown that when the weights of all configurations of a fixed number of white and a fixed number of black sites are compared, minimum (maximum) weight of a white set, minimum (maximum) weight of the a black set, and maximum (minimum) weight between sets occur simultaneously. Such configurations are called maximally even configurations. Similarly, the configurations whose weights are the opposite extremes occur simultaneously and are called minimally even configurations. Algorithms that generate these configurations are constructed and applied to the one- dimensional antiferromagnetic spin-1/2 Ising model. Next the goodness of continued fractions as applied to musical intervals (frequency ratios and their base 2 logarithms) is explored. It is shown that, for the intermediate convergents between two consecutive principal convergents of an irrational number, the first half of the intermediate convergents are poorer approximations than the preceding principal convergent while the second half are better approximations; the goodness of a middle intermediate convergent can only be determined by calculation. These convergents are used to determine what equal-tempered systems have intervals that most closely approximate the musical fifth (pn/ qn = log2(3/2)). The goodness of exponentiated convergents ( 2pn/qn~3/2 ) is also investigated. It is shown that, with the exception of a middle convergent, the goodness of the exponential form agrees with that of its logarithmic Counterpart As in the case of the logarithmic form, the goodness of a middle intermediate convergent in the exponential form can only be determined by calculation. A Desirability Function is constructed that simultaneously measures how well multiple intervals fit in a given equal-tempered system. These measurements are made for octave (base 2) and tritave systems (base 3). Combinatorial properties important to music modulation are considered. These considerations lead These considerations lead to the construction of maximally even scales as partitions of an equal-tempered system.

Status of integrated multidisciplinary rotorcraft optimization research at the Langley Research Center

NASA Technical Reports Server (NTRS)

Mantay, Wayne R.; Adelman, Howard M.

1990-01-01

This paper describes a joint NASA/Army research activity at the Langley Research Center to develop optimization procedures aimed at improving the rotor blade design process by integrating appropriate disciplines and accounting for important interactions among the disciplines. The activity is being guided by a Steering Committee made up of key NASA and Army researchers and managers. The paper describes the optimization formulation in terms of the objective function, design variables, and constraints. The analysis aspects are discussed, and the interdisciplinary interactions are defined in terms of the information that must be transferred among disciplinary analyses as well as the trade-offs between disciplines in determining the details of the design. At this writing, some significant progress has been made. Results given in the paper represent accomplishments in rotor aerodynamic performance optimization for minimum horsepower, rotor dynamic optimization for vibration reduction, approximate analysis of frequencies and mode shapes, rotor structural optimization for minimum weight, and integrated aerodynamic load/dynamics optimization for minimum vibration and weight.

Exploring local regularities for 3D object recognition

NASA Astrophysics Data System (ADS)

Tian, Huaiwen; Qin, Shengfeng

2016-11-01

In order to find better simplicity measurements for 3D object recognition, a new set of local regularities is developed and tested in a stepwise 3D reconstruction method, including localized minimizing standard deviation of angles(L-MSDA), localized minimizing standard deviation of segment magnitudes(L-MSDSM), localized minimum standard deviation of areas of child faces (L-MSDAF), localized minimum sum of segment magnitudes of common edges (L-MSSM), and localized minimum sum of areas of child face (L-MSAF). Based on their effectiveness measurements in terms of form and size distortions, it is found that when two local regularities: L-MSDA and L-MSDSM are combined together, they can produce better performance. In addition, the best weightings for them to work together are identified as 10% for L-MSDSM and 90% for L-MSDA. The test results show that the combined usage of L-MSDA and L-MSDSM with identified weightings has a potential to be applied in other optimization based 3D recognition methods to improve their efficacy and robustness.

Classification of Kiwifruit Grades Based on Fruit Shape Using a Single Camera

PubMed Central

Fu, Longsheng; Sun, Shipeng; Li, Rui; Wang, Shaojin

2016-01-01

This study aims to demonstrate the feasibility for classifying kiwifruit into shape grades by adding a single camera to current Chinese sorting lines equipped with weight sensors. Image processing methods are employed to calculate fruit length, maximum diameter of the equatorial section, and projected area. A stepwise multiple linear regression method is applied to select significant variables for predicting minimum diameter of the equatorial section and volume and to establish corresponding estimation models. Results show that length, maximum diameter of the equatorial section and weight are selected to predict the minimum diameter of the equatorial section, with the coefficient of determination of only 0.82 when compared to manual measurements. Weight and length are then selected to estimate the volume, which is in good agreement with the measured one with the coefficient of determination of 0.98. Fruit classification based on the estimated minimum diameter of the equatorial section achieves a low success rate of 84.6%, which is significantly improved using a linear combination of the length/maximum diameter of the equatorial section and projected area/length ratios, reaching 98.3%. Thus, it is possible for Chinese kiwifruit sorting lines to reach international standards of grading kiwifruit on fruit shape classification by adding a single camera. PMID:27376292

Effects of important parameters variations on computing eigenspace-based minimum variance weights for ultrasound tissue harmonic imaging

NASA Astrophysics Data System (ADS)

Haji Heidari, Mehdi; Mozaffarzadeh, Moein; Manwar, Rayyan; Nasiriavanaki, Mohammadreza

2018-02-01

In recent years, the minimum variance (MV) beamforming has been widely studied due to its high resolution and contrast in B-mode Ultrasound imaging (USI). However, the performance of the MV beamformer is degraded at the presence of noise, as a result of the inaccurate covariance matrix estimation which leads to a low quality image. Second harmonic imaging (SHI) provides many advantages over the conventional pulse-echo USI, such as enhanced axial and lateral resolutions. However, the low signal-to-noise ratio (SNR) is a major problem in SHI. In this paper, Eigenspace-based minimum variance (EIBMV) beamformer has been employed for second harmonic USI. The Tissue Harmonic Imaging (THI) is achieved by Pulse Inversion (PI) technique. Using the EIBMV weights, instead of the MV ones, would lead to reduced sidelobes and improved contrast, without compromising the high resolution of the MV beamformer (even at the presence of a strong noise). In addition, we have investigated the effects of variations of the important parameters in computing EIBMV weights, i.e., K, L, and δ, on the resolution and contrast obtained in SHI. The results are evaluated using numerical data (using point target and cyst phantoms), and the proper parameters of EIBMV are indicated for THI.

Adolescent exercise associated with long-term superior measures of bone geometry: a cross-sectional DXA and MRI study.

PubMed

Kato, T; Yamashita, T; Mizutani, S; Honda, A; Matumoto, M; Umemura, Y

2009-12-01

To investigate whether childhood sports participation, particularly weight-bearing sports, has any effect on bone mineral content (BMC), areal bone mineral density (aBMD) and bone geometric characteristics in middle-aged postmenopausal women. Design/ In this cross-sectional comparison of two groups, 46 middle-aged women (mean age, 60.2 (SD 5.6) years; range, 52-73 years) were grouped according to sport participation during growth: weight-bearing sports, including high-impact weight-bearing activities; and low-impact non-weight-bearing sports or no participation. Dual energy X-ray absorptiometry (DXA)-measured BMC, aBMD in the lumbar spine and femur. Magnetic resonance imaging (MRI) determined bone geometric characteristics in the femur, such as femoral mid-diaphyseal cross-sectional area, periosteal and endosteal perimeters and maximum and minimum second moment of area. Postmenopausal middle-aged women with participation in weight-bearing sports during junior high to high school (12-18 years old) displayed significantly greater BMC in both lumbar spine and femoral neck regions, and also significantly greater femoral mid-diaphyseal bone cross-sectional area, periosteal perimeter and maximum and minimum second moment of area than the non-weight-bearing sports group. Adolescent weight-bearing exercise exerts preservational effects on femoral mid-diaphyseal size and shape, while DXA-measured BMC effectively identified the same tendency. Weight-bearing exercise in youth affects bone, and these effects may be preserved as BMC, geometric and structural advantages even after 40 years.

Effects of total knee and hip arthroplasty on body weight.

PubMed

Duchman, Kyle R; Gao, Yubo; Phisitkul, Phinit

2014-03-01

Patients frequently report functional and subjective improvement following total hip (THA) and knee arthroplasty (TKA), but these improvements do not correlate with decreased body weight at 1- and 2-year follow-up. The purpose of this retrospective study was to investigate changes in body weight following THA and TKA at longer follow-up than the 1- to 2-year follow-up frequently reported in the literature. A retrospective review of patients undergoing THA and TKA, as well as other commonly performed lower extremity orthopedic surgeries, was completed for January 2002 to October 2011 at a single tertiary care facility. Adults who underwent a single lower extremity orthopedic procedure during that time period were included in the study. Patients undergoing THA and TKA were analyzed for clinically and statistically significant weight changes at 1- and minimum 2-year follow-up. At a mean follow-up of 4.82 years, TKA resulted in a statistically significant decrease in mean body weight (1.47 kg; P=.0109). This finding was unique to TKA. The proportion of individuals who experienced clinically significant weight loss between the 1- and minimum 2-year follow-up was higher than the proportion of individuals who gained clinically significant weight over the same time period following THA and TKA. The results of this study suggest that clinically significant weight loss may continue for several years beyond the 1- and 2-year follow-up that is frequently reported in the literature. Copyright 2014, SLACK Incorporated.

A Controlled Design of Ripple-Like Polyamide-6 Nanofiber/Nets Membrane for High-Efficiency Air Filter.

PubMed

Zhang, Shichao; Liu, Hui; Zuo, Fenglei; Yin, Xia; Yu, Jianyong; Ding, Bin

2017-03-01

The filtration capacity of fibrous media for airborne particles is restricted by their thick diameter, low porosity, and limited frontal area. The ability to solve this problem would have broad technological implications for various air filtration applications; despite many past efforts, it remains a great challenge to achieve. Herein, a facile and scalable strategy to fabricate the ripple-like polyamide-6 nanofiber/nets (PA-6 NF/N) air filter via combining electrospinning/netting technique with receiving substrate design is demonstrated. This proposed approach allows the scaffold filaments to orderly embed into 2D PA-6 nanonets layer with Steiner-tree structures and nanoscale diameter of ≈20 nm, resulting in the ripple-like membrane with extremely small pore size, highly porous structure, and hugely extended frontal surface, by facilely adjusting its pleat span and pleat pitch. These unique structural advantages enable the ripple-like PA-6 NF/N filter to filtrate the ultrafine particles with high removal efficiency of 99.996%, low air resistance of 95 Pa, and robust quality factor of >0.11 Pa -1 ; using its superlight weight of 0.9 g m -2 and physical sieving manner. This approach has the potentialities to give rise to a novel generation of filter media displaying enhanced filtration capacity for various applications thanks to their nanoscale features and designed macrostructures. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

21 CFR 520.2134 - Spinosad and milbemycin.

Code of Federal Regulations, 2011 CFR

2011-04-01

... Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... a minimum dosage of 13.5 mg/pound (lb) (30 mg/kilogram (kg)) of body weight spinosad and 0.2 mg/lb (0.5 mg/kg) of body weight milbemycin oxime. (2) Indications for use. To kill fleas; for the...

21 CFR 520.2134 - Spinosad and milbemycin.

Code of Federal Regulations, 2012 CFR

2012-04-01

... Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... a minimum dosage of 13.5 mg/pound (lb) (30 mg/kilogram (kg)) of body weight spinosad and 0.2 mg/lb (0.5 mg/kg) of body weight milbemycin oxime. (2) Indications for use. To kill fleas; for the...

21 CFR 520.2134 - Spinosad and milbemycin.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... a minimum dosage of 13.5 mg/pound (lb) (30 mg/kilogram (kg)) of body weight spinosad and 0.2 mg/lb (0.5 mg/kg) of body weight milbemycin oxime. (2) Indications for use. To kill fleas; for the...

21 CFR 520.2134 - Spinosad and milbemycin.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... a minimum dosage of 13.5 mg/pound (lb) (30 mg/kilogram (kg)) of body weight spinosad and 0.2 mg/lb (0.5 mg/kg) of body weight milbemycin oxime. (2) Indications for use. To kill fleas; for the...

48 CFR 52.247-59 - F.o.b. Origin-Carload and Truckload Shipments.

Code of Federal Regulations, 2011 CFR

2011-10-01

.... origin contracts with shipments in carloads or truckloads. This will facilitate realistic freight cost... weight that will result in the lowest freight rate (or per car charge) on file or published in common... highest applicable minimum weight that will result in the lowest possible freight rate (or per car charge...

48 CFR 52.247-59 - F.o.b. Origin-Carload and Truckload Shipments.

Code of Federal Regulations, 2014 CFR

2014-10-01

.... origin contracts with shipments in carloads or truckloads. This will facilitate realistic freight cost... weight that will result in the lowest freight rate (or per car charge) on file or published in common... highest applicable minimum weight that will result in the lowest possible freight rate (or per car charge...

48 CFR 52.247-59 - F.o.b. Origin-Carload and Truckload Shipments.

Code of Federal Regulations, 2012 CFR

2012-10-01

.... origin contracts with shipments in carloads or truckloads. This will facilitate realistic freight cost... weight that will result in the lowest freight rate (or per car charge) on file or published in common... highest applicable minimum weight that will result in the lowest possible freight rate (or per car charge...

48 CFR 52.247-59 - F.o.b. Origin-Carload and Truckload Shipments.

Code of Federal Regulations, 2013 CFR

2013-10-01

.... origin contracts with shipments in carloads or truckloads. This will facilitate realistic freight cost... weight that will result in the lowest freight rate (or per car charge) on file or published in common... highest applicable minimum weight that will result in the lowest possible freight rate (or per car charge...

46 CFR 160.077-2 - Definitions.

Code of Federal Regulations, 2010 CFR

2010-10-01

... the weight and displacement values prescribed in Tables 160.047-4(c)(2) and 160.047-4(c)(4), each insert must have the minimum weight of kapok and displacement as shown in Table 160.077-2(j). To achieve the specified volume displacement, front and back insert pad coverings may be larger than the...

46 CFR 160.077-2 - Definitions.

Code of Federal Regulations, 2011 CFR

2011-10-01

... the weight and displacement values prescribed in Tables 160.047-4(c)(2) and 160.047-4(c)(4), each insert must have the minimum weight of kapok and displacement as shown in Table 160.077-2(j). To achieve the specified volume displacement, front and back insert pad coverings may be larger than the...

46 CFR 160.077-2 - Definitions.

Code of Federal Regulations, 2012 CFR

2012-10-01

... the weight and displacement values prescribed in Tables 160.047-4(c)(2) and 160.047-4(c)(4), each insert must have the minimum weight of kapok and displacement as shown in Table 160.077-2(j). To achieve the specified volume displacement, front and back insert pad coverings may be larger than the...

A cost-function approach to rival penalized competitive learning (RPCL).

PubMed

Ma, Jinwen; Wang, Taijun

2006-08-01

Rival penalized competitive learning (RPCL) has been shown to be a useful tool for clustering on a set of sample data in which the number of clusters is unknown. However, the RPCL algorithm was proposed heuristically and is still in lack of a mathematical theory to describe its convergence behavior. In order to solve the convergence problem, we investigate it via a cost-function approach. By theoretical analysis, we prove that a general form of RPCL, called distance-sensitive RPCL (DSRPCL), is associated with the minimization of a cost function on the weight vectors of a competitive learning network. As a DSRPCL process decreases the cost to a local minimum, a number of weight vectors eventually fall into a hypersphere surrounding the sample data, while the other weight vectors diverge to infinity. Moreover, it is shown by the theoretical analysis and simulation experiments that if the cost reduces into the global minimum, a correct number of weight vectors is automatically selected and located around the centers of the actual clusters, respectively. Finally, we apply the DSRPCL algorithms to unsupervised color image segmentation and classification of the wine data.

About an adaptively weighted Kaplan-Meier estimate.

PubMed

Plante, Jean-François

2009-09-01

The minimum averaged mean squared error nonparametric adaptive weights use data from m possibly different populations to infer about one population of interest. The definition of these weights is based on the properties of the empirical distribution function. We use the Kaplan-Meier estimate to let the weights accommodate right-censored data and use them to define the weighted Kaplan-Meier estimate. The proposed estimate is smoother than the usual Kaplan-Meier estimate and converges uniformly in probability to the target distribution. Simulations show that the performances of the weighted Kaplan-Meier estimate on finite samples exceed that of the usual Kaplan-Meier estimate. A case study is also presented.

First Approach of Pneumatic Anthropomorphic Hand

DTIC Science & Technology

2001-10-25

1 o f 3 FIRST APPROACH OF PNEUMATIC ANTHROPOMORPHIC HAND Jiménez, Omar; Leija, Lorenzo; Muñoz, Roberto Centro de Investigación y de Estudios...weight and minimum consumption, minimum control and natural appearance. Keywords- Anthropomorphic, hand, Pneumatic system, Prosthesis 1 . INTRODUCTION...The projects have been guided through an specific line of development. The project MARCUS[ 1 ] includes easiness as the most important aspect what

Optimal glass-ceramic structures: Components of giant mirror telescopes

NASA Technical Reports Server (NTRS)

Eschenauer, Hans A.

1990-01-01

Detailed investigations are carried out on optimal glass-ceramic mirror structures of terrestrial space technology (optical telescopes). In order to find an optimum design, a nonlinear multi-criteria optimization problem is formulated. 'Minimum deformation' at 'minimum weight' are selected as contradictory objectives, and a set of further constraints (quilting effect, optical faults etc.) is defined and included. A special result of the investigations is described.

Finding minimum-quotient cuts in planar graphs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, J.K.; Phillips, C.A.

Given a graph G = (V, E) where each vertex v {element_of} V is assigned a weight w(v) and each edge e {element_of} E is assigned a cost c(e), the quotient of a cut partitioning the vertices of V into sets S and {bar S} is c(S, {bar S})/min{l_brace}w(S), w(S){r_brace}, where c(S, {bar S}) is the sum of the costs of the edges crossing the cut and w(S) and w({bar S}) are the sum of the weights of the vertices in S and {bar S}, respectively. The problem of finding a cut whose quotient is minimum for a graph hasmore » in recent years attracted considerable attention, due in large part to the work of Rao and Leighton and Rao. They have shown that an algorithm (exact or approximation) for the minimum-quotient-cut problem can be used to obtain an approximation algorithm for the more famous minimumb-balanced-cut problem, which requires finding a cut (S,{bar S}) minimizing c(S,{bar S}) subject to the constraint bW {le} w(S) {le} (1 {minus} b)W, where W is the total vertex weight and b is some fixed balance in the range 0 < b {le} {1/2}. Unfortunately, the minimum-quotient-cut problem is strongly NP-hard for general graphs, and the best polynomial-time approximation algorithm known for the general problem guarantees only a cut whose quotient is at mostO(lg n) times optimal, where n is the size of the graph. However, for planar graphs, the minimum-quotient-cut problem appears more tractable, as Rao has developed several efficient approximation algorithms for the planar version of the problem capable of finding a cut whose quotient is at most some constant times optimal. In this paper, we improve Rao`s algorithms, both in terms of accuracy and speed. As our first result, we present two pseudopolynomial-time exact algorithms for the planar minimum-quotient-cut problem. As Rao`s most accurate approximation algorithm for the problem -- also a pseudopolynomial-time algorithm -- guarantees only a 1.5-times-optimal cut, our algorithms represent a significant advance.« less

TH-CD-209-01: A Greedy Reassignment Algorithm for the PBS Minimum Monitor Unit Constraint

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lin, Y; Kooy, H; Craft, D

2016-06-15

Purpose: To investigate a Greedy Reassignment algorithm in order to mitigate the effects of low weight spots in proton pencil beam scanning (PBS) treatment plans. Methods: To convert a plan from the treatment planning system’s (TPS) to a deliverable plan, post processing methods can be used to adjust the spot maps to meets the minimum MU constraint. Existing methods include: deleting low weight spots (Cut method), or rounding spots with weight above/below half the limit up/down to the limit/zero (Round method). An alternative method called Greedy Reassignment was developed in this work in which the lowest weight spot in themore » field was removed and its weight reassigned equally among its nearest neighbors. The process was repeated with the next lowest weight spot until all spots in the field were above the MU constraint. The algorithm performance was evaluated using plans collected from 190 patients (496 fields) treated at our facility. The evaluation criteria were the γ-index pass rate comparing the pre-processed and post-processed dose distributions. A planning metric was further developed to predict the impact of post-processing on treatment plans for various treatment planning, machine, and dose tolerance parameters. Results: For fields with a gamma pass rate of 90±1%, the metric has a standard deviation equal to 18% of the centroid value. This showed that the metric and γ-index pass rate are correlated for the Greedy Reassignment algorithm. Using a 3rd order polynomial fit to the data, the Greedy Reassignment method had 1.8 times better metric at 90% pass rate compared to other post-processing methods. Conclusion: We showed that the Greedy Reassignment method yields deliverable plans that are closest to the optimized-without-MU-constraint plan from the TPS. The metric developed in this work could help design the minimum MU threshold with the goal of keeping the γ-index pass rate above an acceptable value.« less

External morphology and calling song characteristics in Tibicen plebejus (Hemiptera: Cicadidae).

PubMed

Mehdipour, Maedeh; Sendi, Jalal Jalali; Zamanian, Hossein

2015-02-01

Tibicen plebejus is the largest cicada native to the ecosystem in northern Iran. The male cicada produces a loud calling song for attracting females from a long distance. It is presumed that the female selects a mate based on a combination of passive and active mechanisms, but it is not known if she selects for size, nor if the male's size correlates with any characteristic of the advertisement call. In this study, we report the relationship between calling song features and morphological characters in the male of T. plebejus. Research was conducted in northern Iran during the summer of 2010. Seventeen males were collected and their calling songs were recorded in a natural environment. Two morphological characters were measured: length and weight. Maximum, minimum and average of values of 10 key acoustic variables of the calling song were analyzed: phrase duration, phrase part 1, phrase part 2, number of phrases per minute, echeme duration, echeme period, interecheme interval, number of echeme per second, echeme/intereheme ratio, and dominant frequency. The data were tested for the level of association between morphology and acoustic variables using simple linear regression. In conclusion, in terms of song structure, three significant positive correlations existed between length and (1) mean echeme duration, (2) mean echeme/interecheme ratio, (3) maximum echeme/interecheme ratio. We found out also four significant negative correlations between both length and weight with (1) minimum interecheme intervals, (2) mean dominant frequency, (3) minimum dominant frequency, (4) maximum dominant frequency, and between weight and (1) minimum interecheme intervals, (2) mean dominant frequency, (3) minimum dominant frequency, (4) maximum dominant frequency. It can be found that larger males of T. plebejus produce songs of lower frequency and are less silent between echemes. Copyright © 2014 Académie des sciences. Published by Elsevier SAS. All rights reserved.

Comparative study of the craniofacial growth depending on the type of lactation received.

PubMed

Sánchez-Molins, M; Grau Carbó, J; Lischeid Gaig, C; Ustrell Torrent, J M

2010-06-01

Several organizations consider mother's milk the optimal nutrition source for newborns [AAP, 1998; Gartner et al., 1997; Mohrbacher and Stock, 2002; WHO, 1989]. However, there is little scientific evidence supporting the idea that breastfeeding has a positive influence on the development of the orofacial structures. The study of cases and controls (observational, analytical and retrospective) and lateral teleradiographs of the cranium of 197 patients (106 breast-fed and 91 bottle-fed) were compared. Ricketts, Steiner and McNamara values were used for the cephalometric analysis. Differences between the two groups were analysed by applying the T-test and ANOVA. Statistical significance levels were set at p<0.05. Non-nutritive infantile sucking habits have been compared; differences between the two groups were analysed by applying the Chi-square test. First, the upper incisors were found to be protruded in the bottle-fed group. Second, subjects belonging to the breast-fed group displayed a brachycephalic mandible arch, while those fed with bottle had a dolichocephalic Steiner mandibular plane. Third, both facial depth and distance of the pogonion to the perpendicular nasion presented a certain tendency to a retruded mandibular bone in the bottle-fed group. And fourth, the frequency of use of dummy and thumb suction were greater in the bottle feed group, without statistical significance. In addition to the multiple advantages that mother's milk offers to newborns, breastfeeding also helps correct orofacial development (not only for the incisors position, but also for the vertical and sagittal relations of the mandible with upper maxillary and cranial basis).

The impact of the minimum wage on health.

PubMed

Andreyeva, Elena; Ukert, Benjamin

2018-03-07

This study evaluates the effect of minimum wage on risky health behaviors, healthcare access, and self-reported health. We use data from the 1993-2015 Behavioral Risk Factor Surveillance System, and employ a difference-in-differences strategy that utilizes time variation in new minimum wage laws across U.S. states. Results suggest that the minimum wage increases the probability of being obese and decreases daily fruit and vegetable intake, but also decreases days with functional limitations while having no impact on healthcare access. Subsample analyses reveal that the increase in weight and decrease in fruit and vegetable intake are driven by the older population, married, and whites. The improvement in self-reported health is especially strong among non-whites, females, and married.

21 CFR 520.1445 - Milbemycin oxime and praziquantel.

Code of Federal Regulations, 2014 CFR

2014-04-01

... Section 520.1445 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... orally, once a month, a minimum dosage of 0.23 mg per pound (mg/lb) of body weight (0.5 mg per kilogram (mg/kg)) milbemycin oxime and 2.28 mg/lb of body weight (5 mg/kg) praziquantel. (ii) Indications for...

21 CFR 520.1445 - Milbemycin oxime and praziquantel.

Code of Federal Regulations, 2013 CFR

2013-04-01

... Section 520.1445 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... orally, once a month, a minimum dosage of 0.23 mg per pound (mg/lb) of body weight (0.5 mg per kilogram (mg/kg)) milbemycin oxime and 2.28 mg/lb of body weight (5 mg/kg) praziquantel. (ii) Indications for...

Kalman filter for statistical monitoring of forest cover across sub-continental regions [Symposium

Treesearch

Raymond L. Czaplewski

1991-01-01

The Kalman filter is a generalization of the composite estimator. The univariate composite estimate combines 2 prior estimates of population parameter with a weighted average where the scalar weight is inversely proportional to the variances. The composite estimator is a minimum variance estimator that requires no distributional assumptions other than estimates of the...

An information-theoretical perspective on weighted ensemble forecasts

NASA Astrophysics Data System (ADS)

Weijs, Steven V.; van de Giesen, Nick

2013-08-01

This paper presents an information-theoretical method for weighting ensemble forecasts with new information. Weighted ensemble forecasts can be used to adjust the distribution that an existing ensemble of time series represents, without modifying the values in the ensemble itself. The weighting can, for example, add new seasonal forecast information in an existing ensemble of historically measured time series that represents climatic uncertainty. A recent article in this journal compared several methods to determine the weights for the ensemble members and introduced the pdf-ratio method. In this article, a new method, the minimum relative entropy update (MRE-update), is presented. Based on the principle of minimum discrimination information, an extension of the principle of maximum entropy (POME), the method ensures that no more information is added to the ensemble than is present in the forecast. This is achieved by minimizing relative entropy, with the forecast information imposed as constraints. From this same perspective, an information-theoretical view on the various weighting methods is presented. The MRE-update is compared with the existing methods and the parallels with the pdf-ratio method are analysed. The paper provides a new, information-theoretical justification for one version of the pdf-ratio method that turns out to be equivalent to the MRE-update. All other methods result in sets of ensemble weights that, seen from the information-theoretical perspective, add either too little or too much (i.e. fictitious) information to the ensemble.

21 CFR 178.3860 - Release agents.

Code of Federal Regulations, 2011 CFR

2011-04-01

...-octadecylcarbamate) (CAS Reg. No. 70892-21-6) produced by the reaction between stoichiometrically equivalent amounts of octadecyl isocyanate and vinyl alcohol/vinyl acetate copolymer; minimum average molecular weight...

Minimum distraction gap: how much ankle joint space is enough in ankle distraction arthroplasty?

PubMed

Fragomen, Austin T; McCoy, Thomas H; Meyers, Kathleen N; Rozbruch, S Robert

2014-02-01

The success of ankle distraction arthroplasty relies on the separation of the tibiotalar articular surfaces. The purpose of this study was to find the minimum distraction gap needed to ensure that the tibiotalar joint surfaces would not contact each other with full weight-bearing while under distraction. Circular external fixators were mounted to nine cadaver ankle specimens. Each specimen was then placed into a custom-designed load chamber. Loads of 0, 350, and 700N were applied to the specimen. Radiographic joint space was measured and joint contact pressure was monitored under each load. The external fixator was then sequentially distracted, and the radiographic joint space was measured under the three different loads. The experiment was stopped when there was no joint contact under 700N of load. The radiographic joint space was measured and the initial (undistracted) radiographic joint space was subtracted from it yielding the distraction gap. The minimum distraction gap (mDG) that would provide total unloading was calculated. The average mDG was 2.4 mm (range, 1.6 to 4.0 mm) at 700N of load, 4.4 mm (range, 3.7 to 5.8 mm) at 350N of load, and 4.9 mm (range, 3.7 to 7.0 mm) at 0N of load. These results suggest that if the radiographic joint space of on a standing X-ray of an ankle undergoing distraction arthroplasty shows a minimum of 5.8 mm of DG, then there will be no contact between joint surfaces during full weight-bearing. Therefore, 5 mm of radiographic joint space, as recommended historically, may not be adequate to prevent contact of the articular surfaces during weight-bearing.

Generalized weighted likelihood density estimators with application to finite mixture of exponential family distributions

PubMed Central

Zhan, Tingting; Chevoneva, Inna; Iglewicz, Boris

2010-01-01

The family of weighted likelihood estimators largely overlaps with minimum divergence estimators. They are robust to data contaminations compared to MLE. We define the class of generalized weighted likelihood estimators (GWLE), provide its influence function and discuss the efficiency requirements. We introduce a new truncated cubic-inverse weight, which is both first and second order efficient and more robust than previously reported weights. We also discuss new ways of selecting the smoothing bandwidth and weighted starting values for the iterative algorithm. The advantage of the truncated cubic-inverse weight is illustrated in a simulation study of three-components normal mixtures model with large overlaps and heavy contaminations. A real data example is also provided. PMID:20835375

A comparative study of minimum norm inverse methods for MEG imaging

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leahy, R.M.; Mosher, J.C.; Phillips, J.W.

1996-07-01

The majority of MEG imaging techniques currently in use fall into the general class of (weighted) minimum norm methods. The minimization of a norm is used as the basis for choosing one from a generally infinite set of solutions that provide an equally good fit to the data. This ambiguity in the solution arises from the inherent non- uniqueness of the continuous inverse problem and is compounded by the imbalance between the relatively small number of measurements and the large number of source voxels. Here we present a unified view of the minimum norm methods and describe how we canmore » use Tikhonov regularization to avoid instabilities in the solutions due to noise. We then compare the performance of regularized versions of three well known linear minimum norm methods with the non-linear iteratively reweighted minimum norm method and a Bayesian approach.« less

Combinatorics associated with inflections and bitangents of plane quartics

NASA Astrophysics Data System (ADS)

Gizatullin, M. Kh

2013-08-01

After a preliminary survey and a description of some small Steiner systems from the standpoint of the theory of invariants of binary forms, we construct a binary Golay code (of length 24) using ideas from J. Grassmann's thesis of 1875. One of our tools is a pair of disjoint Fano planes. Another application of such pairs and properties of plane quartics is a construction of a new block design on 28 objects. This block design is a part of a dissection of the set of 288 Aronhold sevens. The dissection distributes the Aronhold sevens into 8 disjoint block designs of this type.

Extracting the σ-term from low-energy pion-nucleon scattering

NASA Astrophysics Data System (ADS)

Ruiz de Elvira, Jacobo; Hoferichter, Martin; Kubis, Bastian; Meißner, Ulf-G.

2018-02-01

We present an extraction of the pion-nucleon (π N) scattering lengths from low-energy π N scattering, by fitting a representation based on Roy-Steiner equations to the low-energy data base. We show that the resulting values confirm the scattering-length determination from pionic atoms, and discuss the stability of the fit results regarding electromagnetic corrections and experimental normalization uncertainties in detail. Our results provide further evidence for a large π N σ-term, {σ }π N=58(5) {{MeV}}, in agreement with, albeit less precise than, the determination from pionic atoms.

Relativistic Newtonian Dynamics under a central force

NASA Astrophysics Data System (ADS)

Friedman, Yaakov

2016-10-01

Planck's formula and General Relativity indicate that potential energy influences spacetime. Using Einstein's Equivalence Principle and an extension of his Clock Hypothesis, an explicit description of this influence is derived. We present a new relativity model by incorporating the influence of the potential energy on spacetime in Newton's dynamics for motion under a central force. This model extends the model used by Friedman and Steiner (EPL, 113 (2016) 39001) to obtain the exact precession of Mercury without curving spacetime. We also present a solution of this model for a hydrogen-like atom, which explains the reason for a probabilistic description.

Shortened Mean Transit Time in CT Perfusion With Singular Value Decomposition Analysis in Acute Cerebral Infarction: Quantitative Evaluation and Comparison With Various CT Perfusion Parameters.

PubMed

Murayama, Kazuhiro; Katada, Kazuhiro; Hayakawa, Motoharu; Toyama, Hiroshi

We aimed to clarify the cause of shortened mean transit time (MTT) in acute ischemic cerebrovascular disease and examined its relationship with reperfusion. Twenty-three patients with acute ischemic cerebrovascular disease underwent whole-brain computed tomography perfusion (CTP). The maximum MTT (MTTmax), minimum MTT (MTTmin), ratio of maximum and minimum MTT (MTTmin/max), and minimum cerebral blood volume (CBV) (CBVmin) were measured by automatic region of interest analysis. Diffusion weighted image was performed to calculate infarction volume. We compared these CTP parameters between reperfusion and nonreperfusion groups and calculated correlation coefficients between the infarction core volume and CTP parameters. Significant differences were observed between reperfusion and nonreperfusion groups (MTTmin/max: P = 0.014; CBVmin ratio: P = 0.038). Regression analysis of CTP and high-intensity volume on diffusion weighted image showed negative correlation (CBVmin ratio: r = -0.41; MTTmin/max: r = -0.30; MTTmin ratio: r = -0.27). A region of shortened MTT indicated obstructed blood flow, which was attributed to the singular value decomposition method error.

A small, 1400 K, reactor for Brayton space power systems.

NASA Technical Reports Server (NTRS)

Lantz, E.; Mayo, W.

1972-01-01

An investigation was conducted to determine minimum dimensions and minimum weight obtainable in a design for a reactor using uranium-233 nitride or plutonium-239 nitride as fuel. Such a reactor had been considered by Krasner et al. (1971). Present space power status is discussed, together with questions of reactor design and power distribution in the reactor. The characteristics of various reactor types are compared, giving attention also to a zirconium hydride reactor.

Optimization for minimum sensitivity to uncertain parameters

NASA Technical Reports Server (NTRS)

Pritchard, Jocelyn I.; Adelman, Howard M.; Sobieszczanski-Sobieski, Jaroslaw

1994-01-01

A procedure to design a structure for minimum sensitivity to uncertainties in problem parameters is described. The approach is to minimize directly the sensitivity derivatives of the optimum design with respect to fixed design parameters using a nested optimization procedure. The procedure is demonstrated for the design of a bimetallic beam for minimum weight with insensitivity to uncertainties in structural properties. The beam is modeled with finite elements based on two dimensional beam analysis. A sequential quadratic programming procedure used as the optimizer supplies the Lagrange multipliers that are used to calculate the optimum sensitivity derivatives. The method was perceived to be successful from comparisons of the optimization results with parametric studies.

MIST - MINIMUM-STATE METHOD FOR RATIONAL APPROXIMATION OF UNSTEADY AERODYNAMIC FORCE COEFFICIENT MATRICES

NASA Technical Reports Server (NTRS)

Karpel, M.

1994-01-01

Various control analysis, design, and simulation techniques of aeroservoelastic systems require the equations of motion to be cast in a linear, time-invariant state-space form. In order to account for unsteady aerodynamics, rational function approximations must be obtained to represent them in the first order equations of the state-space formulation. A computer program, MIST, has been developed which determines minimum-state approximations of the coefficient matrices of the unsteady aerodynamic forces. The Minimum-State Method facilitates the design of lower-order control systems, analysis of control system performance, and near real-time simulation of aeroservoelastic phenomena such as the outboard-wing acceleration response to gust velocity. Engineers using this program will be able to calculate minimum-state rational approximations of the generalized unsteady aerodynamic forces. Using the Minimum-State formulation of the state-space equations, they will be able to obtain state-space models with good open-loop characteristics while reducing the number of aerodynamic equations by an order of magnitude more than traditional approaches. These low-order state-space mathematical models are good for design and simulation of aeroservoelastic systems. The computer program, MIST, accepts tabular values of the generalized aerodynamic forces over a set of reduced frequencies. It then determines approximations to these tabular data in the LaPlace domain using rational functions. MIST provides the capability to select the denominator coefficients in the rational approximations, to selectably constrain the approximations without increasing the problem size, and to determine and emphasize critical frequency ranges in determining the approximations. MIST has been written to allow two types data weighting options. The first weighting is a traditional normalization of the aerodynamic data to the maximum unit value of each aerodynamic coefficient. The second allows weighting the importance of different tabular values in determining the approximations based upon physical characteristics of the system. Specifically, the physical weighting capability is such that each tabulated aerodynamic coefficient, at each reduced frequency value, is weighted according to the effect of an incremental error of this coefficient on aeroelastic characteristics of the system. In both cases, the resulting approximations yield a relatively low number of aerodynamic lag states in the subsequent state-space model. MIST is written in ANSI FORTRAN 77 for DEC VAX series computers running VMS. It requires approximately 1Mb of RAM for execution. The standard distribution medium for this package is a 9-track 1600 BPI magnetic tape in DEC VAX FILES-11 format. It is also available on a TK50 tape cartridge in DEC VAX BACKUP format. MIST was developed in 1991. DEC VAX and VMS are trademarks of Digital Equipment Corporation. FORTRAN 77 is a registered trademark of Lahey Computer Systems, Inc.

Optimization of fixed-range trajectories for supersonic transport aircraft

NASA Astrophysics Data System (ADS)

Windhorst, Robert Dennis

1999-11-01

This thesis develops near-optimal guidance laws that generate minimum fuel, time, or direct operating cost fixed-range trajectories for supersonic transport aircraft. The approach uses singular perturbation techniques to time-scale de-couple the equations of motion into three sets of dynamics, two of which are analyzed in the main body of this thesis and one of which is analyzed in the Appendix. The two-point-boundary-value-problems obtained by application of the maximum principle to the dynamic systems are solved using the method of matched asymptotic expansions. Finally, the two solutions are combined using the matching principle and an additive composition rule to form a uniformly valid approximation of the full fixed-range trajectory. The approach is used on two different time-scale formulations. The first holds weight constant, and the second allows weight and range dynamics to propagate on the same time-scale. Solutions for the first formulation are only carried out to zero order in the small parameter, while solutions for the second formulation are carried out to first order. Calculations for a HSCT design were made to illustrate the method. Results show that the minimum fuel trajectory consists of three segments: a minimum fuel energy-climb, a cruise-climb, and a minimum drag glide. The minimum time trajectory also has three segments: a maximum dynamic pressure ascent, a constant altitude cruise, and a maximum dynamic pressure glide. The minimum direct operating cost trajectory is an optimal combination of the two. For realistic costs of fuel and flight time, the minimum direct operating cost trajectory is very similar to the minimum fuel trajectory. Moreover, the HSCT has three local optimum cruise speeds, with the globally optimum cruise point at the highest allowable speed, if range is sufficiently long. The final range of the trajectory determines which locally optimal speed is best. Ranges of 500 to 6,000 nautical miles, subsonic and supersonic mixed flight, and varying fuel efficiency cases are analyzed. Finally, the payload-range curve of the HSCT design is determined.

Technical Note: Using k-means clustering to determine the number and position of isocenters in MLC-based multiple target intracranial radiosurgery.

PubMed

Yock, Adam D; Kim, Gwe-Ya

2017-09-01

To present the k-means clustering algorithm as a tool to address treatment planning considerations characteristic of stereotactic radiosurgery using a single isocenter for multiple targets. For 30 patients treated with stereotactic radiosurgery for multiple brain metastases, the geometric centroids and radii of each met were determined from the treatment planning system. In-house software used this as well as weighted and unweighted versions of the k-means clustering algorithm to group the targets to be treated with a single isocenter, and to position each isocenter. The algorithm results were evaluated using within-cluster sum of squares as well as a minimum target coverage metric that considered the effect of target size. Both versions of the algorithm were applied to an example patient to demonstrate the prospective determination of the appropriate number and location of isocenters. Both weighted and unweighted versions of the k-means algorithm were applied successfully to determine the number and position of isocenters. Comparing the two, both the within-cluster sum of squares metric and the minimum target coverage metric resulting from the unweighted version were less than those from the weighted version. The average magnitudes of the differences were small (-0.2 cm 2 and 0.1% for the within cluster sum of squares and minimum target coverage, respectively) but statistically significant (Wilcoxon signed-rank test, P < 0.01). The differences between the versions of the k-means clustering algorithm represented an advantage of the unweighted version for the within-cluster sum of squares metric, and an advantage of the weighted version for the minimum target coverage metric. While additional treatment planning considerations have a large influence on the final treatment plan quality, both versions of the k-means algorithm provide automatic, consistent, quantitative, and objective solutions to the tasks associated with SRS treatment planning using a single isocenter for multiple targets. © 2017 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Robustness of mission plans for unmanned aircraft

NASA Astrophysics Data System (ADS)

Niendorf, Moritz

This thesis studies the robustness of optimal mission plans for unmanned aircraft. Mission planning typically involves tactical planning and path planning. Tactical planning refers to task scheduling and in multi aircraft scenarios also includes establishing a communication topology. Path planning refers to computing a feasible and collision-free trajectory. For a prototypical mission planning problem, the traveling salesman problem on a weighted graph, the robustness of an optimal tour is analyzed with respect to changes to the edge costs. Specifically, the stability region of an optimal tour is obtained, i.e., the set of all edge cost perturbations for which that tour is optimal. The exact stability region of solutions to variants of the traveling salesman problems is obtained from a linear programming relaxation of an auxiliary problem. Edge cost tolerances and edge criticalities are derived from the stability region. For Euclidean traveling salesman problems, robustness with respect to perturbations to vertex locations is considered and safe radii and vertex criticalities are introduced. For weighted-sum multi-objective problems, stability regions with respect to changes in the objectives, weights, and simultaneous changes are given. Most critical weight perturbations are derived. Computing exact stability regions is intractable for large instances. Therefore, tractable approximations are desirable. The stability region of solutions to relaxations of the traveling salesman problem give under approximations and sets of tours give over approximations. The application of these results to the two-neighborhood and the minimum 1-tree relaxation are discussed. Bounds on edge cost tolerances and approximate criticalities are obtainable likewise. A minimum spanning tree is an optimal communication topology for minimizing the cumulative transmission power in multi aircraft missions. The stability region of a minimum spanning tree is given and tolerances, stability balls, and criticalities are derived. This analysis is extended to Euclidean minimum spanning trees. This thesis aims at enabling increased mission performance by providing means of assessing the robustness and optimality of a mission and methods for identifying critical elements. Examples of the application to mission planning in contested environments, cargo aircraft mission planning, multi-objective mission planning, and planning optimal communication topologies for teams of unmanned aircraft are given.

78 FR 16662 - Determination Under the Textile and Apparel Commercial Availability Provision of the United...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-18

...% polyester/4-10% spandex (includes both face and backer fabric). Overall weight: 287-351 grams per square... spandex (filament) Thread count: 49-52 picks per cm x 43-45 picks per cm Weight: 121.5-148.5 grams per... grams per square meter Width: Selvedge: 150.4-154.4 cm; Minimum cuttable: 145.3-149.3 cm Coloration...

Reversible geling co-polymer and method of making

DOEpatents

Gutowska, Anna

2005-12-27

The present invention is a thereapeutic agent carrier having a thermally reversible gel or geling copolymer that is a linear random copolymer of an [meth-]acrylamide derivative and a hydrophilic comonomer, wherein the linear random copolymer is in the form of a plurality of linear chains having a plurality of molecular weights greater than or equal to a minimum geling molecular weight cutoff and a therapeutic agent.

Rapid Countermeasure Discovery against Francisella tularensis Based on a Metabolic Network Reconstruction

DTIC Science & Technology

2013-05-21

minimum inhibitory concentrations and mammalian cell cytotoxicities. The most promising compound had a low molecular weight, was non-toxic, and abolished... molecular weight, was non-toxic, and abolished bacterial growth at 13 mM, with putative activity against pantetheine-phosphate adenylyltransferase, an...time period. Metabolic genome-scale models of bacteria have provided a computational framework for in silico simulations to evaluate how metabolic

The autophagy-related marker LC3 can predict prognosis in human hepatocellular carcinoma.

PubMed

Lee, Yoo Jin; Hah, Yu Jin; Ha, Yu Jin; Kang, Yu Na; Kang, Koo Jeong; Hwang, Jae Seok; Chung, Woo Jin; Cho, Kwang Bum; Park, Kyung Sik; Kim, Eun Soo; Seo, Hye-Young; Kim, Mi-Kyung; Park, Keun-Gyu; Jang, Byoung Kuk

2013-01-01

Defects of autophagy and endoplasmic reticulum (ER) stress are related to many diseases and tumors. However, only a few studies have examined hepatocellular carcinoma (HCC) as related to these processes. Therefore, in this study, we investigated the expression and extent of autophagy and ER stress-related markers in HCC and their influence on clinical characteristics and prognosis for each protein. The expression of autophagy-related markers (LC3 and Beclin-1) and ER stress-related markers (GRP78 and CHOP) was analyzed by immunohistochemistry on tissues from completely resected specimens of 190 HCC patients. Their influence on clinicopathologic features and prognosis were evaluated using the chi-square test and Kaplan-Meier analysis. Correlations of each protein were determined by Spearman's correlation analysis. LC3 expression was not correlated with TNM, BCLC stage, or Edmonson-Steiner grading, whereas it was correlated with longer overall survival (OS) (p = 0.039) and tended to be related with longer time to recurrence (TTR) (p=0.068) although it did not show statistical significance. Multivariate analysis indicated that LC3 expression was a significantly independent prognostic factor of OS (HR, 0.42; 95% CI, 0.22-0.80; p-value=0.009) and TTR (HR, 0.54; 95% CI, 0.33-0.90; p=0.017). Expression of LC3 in advanced stages of TNM (III) (p=0.045) and Edmonson-Steiner Grades (III and IV) (p=0.043) was correlated with longer survival, but not in the early stages. A positive correlation was not observed between the expression of autophagy-related markers and ER stress-related markers. Our results suggest that the expression and extent of LC3 might be a strong prognostic factor of HCC, especially in patients with surgical resection.

14 CFR 23.1563 - Airspeed placards.

Code of Federal Regulations, 2011 CFR

2011-01-01

... multiengine-powered airplanes of more than 6,000 pounds maximum weight, and turbine engine-powered airplanes, the maximum value of the minimum control speed, VMC (one-engine-inoperative) determined under § 23.149...

14 CFR 23.1563 - Airspeed placards.

Code of Federal Regulations, 2010 CFR

2010-01-01

... multiengine-powered airplanes of more than 6,000 pounds maximum weight, and turbine engine-powered airplanes, the maximum value of the minimum control speed, VMC (one-engine-inoperative) determined under § 23.149...

Finding minimum-quotient cuts in planar graphs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Park, J.K.; Phillips, C.A.

Given a graph G = (V, E) where each vertex v [element of] V is assigned a weight w(v) and each edge e [element of] E is assigned a cost c(e), the quotient of a cut partitioning the vertices of V into sets S and [bar S] is c(S, [bar S])/min[l brace]w(S), w(S)[r brace], where c(S, [bar S]) is the sum of the costs of the edges crossing the cut and w(S) and w([bar S]) are the sum of the weights of the vertices in S and [bar S], respectively. The problem of finding a cut whose quotient is minimummore » for a graph has in recent years attracted considerable attention, due in large part to the work of Rao and Leighton and Rao. They have shown that an algorithm (exact or approximation) for the minimum-quotient-cut problem can be used to obtain an approximation algorithm for the more famous minimumb-balanced-cut problem, which requires finding a cut (S,[bar S]) minimizing c(S,[bar S]) subject to the constraint bW [le] w(S) [le] (1 [minus] b)W, where W is the total vertex weight and b is some fixed balance in the range 0 < b [le] [1/2]. Unfortunately, the minimum-quotient-cut problem is strongly NP-hard for general graphs, and the best polynomial-time approximation algorithm known for the general problem guarantees only a cut whose quotient is at mostO(lg n) times optimal, where n is the size of the graph. However, for planar graphs, the minimum-quotient-cut problem appears more tractable, as Rao has developed several efficient approximation algorithms for the planar version of the problem capable of finding a cut whose quotient is at most some constant times optimal. In this paper, we improve Rao's algorithms, both in terms of accuracy and speed. As our first result, we present two pseudopolynomial-time exact algorithms for the planar minimum-quotient-cut problem. As Rao's most accurate approximation algorithm for the problem -- also a pseudopolynomial-time algorithm -- guarantees only a 1.5-times-optimal cut, our algorithms represent a significant advance.« less

14 CFR 91.213 - Inoperative instruments and equipment.

Code of Federal Regulations, 2012 CFR

2012-01-01

... airplane, glider, lighter-than-air aircraft, powered parachute, or weight-shift-control aircraft, for which... small airplane, glider, or lighter-than-air aircraft for which a Master Minimum Equipment List has been...

14 CFR 91.213 - Inoperative instruments and equipment.

Code of Federal Regulations, 2013 CFR

2013-01-01

... airplane, glider, lighter-than-air aircraft, powered parachute, or weight-shift-control aircraft, for which... small airplane, glider, or lighter-than-air aircraft for which a Master Minimum Equipment List has been...

14 CFR 91.213 - Inoperative instruments and equipment.

Code of Federal Regulations, 2011 CFR

2011-01-01

... airplane, glider, lighter-than-air aircraft, powered parachute, or weight-shift-control aircraft, for which... small airplane, glider, or lighter-than-air aircraft for which a Master Minimum Equipment List has been...

14 CFR 91.213 - Inoperative instruments and equipment.

Code of Federal Regulations, 2014 CFR

2014-01-01

... airplane, glider, lighter-than-air aircraft, powered parachute, or weight-shift-control aircraft, for which... small airplane, glider, or lighter-than-air aircraft for which a Master Minimum Equipment List has been...

14 CFR 91.213 - Inoperative instruments and equipment.

Code of Federal Regulations, 2010 CFR

2010-01-01

... airplane, glider, lighter-than-air aircraft, powered parachute, or weight-shift-control aircraft, for which... small airplane, glider, or lighter-than-air aircraft for which a Master Minimum Equipment List has been...

Mini-Brayton heat source assembly design study. Volume 2: Titan 3C mission. [minimum weight modifications

NASA Technical Reports Server (NTRS)

1973-01-01

Major conclusions of the space shuttle heat source assembly study are reported that project a minimum weight design for a Titan 3 C synchronous orbit mission; requirements to recover the heat source in orbit are eliminated. This concept permits location of the heat source end enclosure supports and heat source assembly support housing in a low temperature region external to the insulation enclosure and considers titanium and beryllium alloys for these support elements. A high melting insulation blanket consisting of nickel foil coated with zirconia, or of gold foil separated with glass fiber layers, is selected to provide emergency cooling in the range 2000 to 2700 F to prevent the isotope heat source from reaching unsafe temperatures. A graphic view of the baseline heat source assembly is included.

Optimal trajectories for hypersonic launch vehicles

NASA Technical Reports Server (NTRS)

Ardema, Mark D.; Bowles, Jeffrey V.; Whittaker, Thomas

1992-01-01

In this paper, we derive a near-optimal guidance law for the ascent trajectory from Earth surface to Earth orbit of a hypersonic, dual-mode propulsion, lifting vehicle. Of interest are both the optimal flight path and the optimal operation of the propulsion system. The guidance law is developed from the energy-state approximation of the equations of motion. The performance objective is a weighted sum of fuel mass and volume, with the weighting factor selected to give minimum gross take-off weight for a specific payload mass and volume.

Preliminary structural design of a lunar transfer vehicle aerobrake. M.S. Thesis

NASA Technical Reports Server (NTRS)

Bush, Lance B.

1992-01-01

An aerobrake concept for a Lunar transfer vehicle was weight optimized through the use of the Taguchi design method, structural finite element analyses and structural sizing routines. Six design parameters were chosen to represent the aerobrake structural configuration. The design parameters included honeycomb core thickness, diameter to depth ratio, shape, material, number of concentric ring frames, and number of radial frames. Each parameter was assigned three levels. The minimum weight aerobrake configuration resulting from the study was approx. half the weight of the average of all twenty seven experimental configurations. The parameters having the most significant impact on the aerobrake structural weight were identified.

Terrapin technologies manned Mars mission proposal

NASA Technical Reports Server (NTRS)

Amato, Michael; Bryant, Heather; Coleman, Rodney; Compy, Chris; Crouse, Patrick; Crunkleton, Joe; Hurtado, Edgar; Iverson, Eirik; Kamosa, Mike; Kraft, Lauri (Editor)

1990-01-01

A Manned Mars Mission (M3) design study is proposed. The purpose of M3 is to transport 10 personnel and a habitat with all required support systems and supplies from low Earth orbit (LEO) to the surface of Mars and, after an eight-man surface expedition of 3 months, to return the personnel safely to LEO. The proposed hardware design is based on systems and components of demonstrated high capability and reliability. The mission design builds on past mission experience, but incorporates innovative design approaches to achieve mission priorities. Those priorities, in decreasing order of importance, are safety, reliability, minimum personnel transfer time, minimum weight, and minimum cost. The design demonstrates the feasibility and flexibility of a Waverider transfer module.

Hybrid Weighted Minimum Norm Method A new method based LORETA to solve EEG inverse problem.

PubMed

Song, C; Zhuang, T; Wu, Q

2005-01-01

This Paper brings forward a new method to solve EEG inverse problem. Based on following physiological characteristic of neural electrical activity source: first, the neighboring neurons are prone to active synchronously; second, the distribution of source space is sparse; third, the active intensity of the sources are high centralized, we take these prior knowledge as prerequisite condition to develop the inverse solution of EEG, and not assume other characteristic of inverse solution to realize the most commonly 3D EEG reconstruction map. The proposed algorithm takes advantage of LORETA's low resolution method which emphasizes particularly on 'localization' and FOCUSS's high resolution method which emphasizes particularly on 'separability'. The method is still under the frame of the weighted minimum norm method. The keystone is to construct a weighted matrix which takes reference from the existing smoothness operator, competition mechanism and study algorithm. The basic processing is to obtain an initial solution's estimation firstly, then construct a new estimation using the initial solution's information, repeat this process until the solutions under last two estimate processing is keeping unchanged.

A path following algorithm for the graph matching problem.

PubMed

Zaslavskiy, Mikhail; Bach, Francis; Vert, Jean-Philippe

2009-12-01

We propose a convex-concave programming approach for the labeled weighted graph matching problem. The convex-concave programming formulation is obtained by rewriting the weighted graph matching problem as a least-square problem on the set of permutation matrices and relaxing it to two different optimization problems: a quadratic convex and a quadratic concave optimization problem on the set of doubly stochastic matrices. The concave relaxation has the same global minimum as the initial graph matching problem, but the search for its global minimum is also a hard combinatorial problem. We, therefore, construct an approximation of the concave problem solution by following a solution path of a convex-concave problem obtained by linear interpolation of the convex and concave formulations, starting from the convex relaxation. This method allows to easily integrate the information on graph label similarities into the optimization problem, and therefore, perform labeled weighted graph matching. The algorithm is compared with some of the best performing graph matching methods on four data sets: simulated graphs, QAPLib, retina vessel images, and handwritten Chinese characters. In all cases, the results are competitive with the state of the art.

[Application of an Adaptive Inertia Weight Particle Swarm Algorithm in the Magnetic Resonance Bias Field Correction].

PubMed

Wang, Chang; Qin, Xin; Liu, Yan; Zhang, Wenchao

2016-06-01

An adaptive inertia weight particle swarm algorithm is proposed in this study to solve the local optimal problem with the method of traditional particle swarm optimization in the process of estimating magnetic resonance(MR)image bias field.An indicator measuring the degree of premature convergence was designed for the defect of traditional particle swarm optimization algorithm.The inertia weight was adjusted adaptively based on this indicator to ensure particle swarm to be optimized globally and to avoid it from falling into local optimum.The Legendre polynomial was used to fit bias field,the polynomial parameters were optimized globally,and finally the bias field was estimated and corrected.Compared to those with the improved entropy minimum algorithm,the entropy of corrected image was smaller and the estimated bias field was more accurate in this study.Then the corrected image was segmented and the segmentation accuracy obtained in this research was 10% higher than that with improved entropy minimum algorithm.This algorithm can be applied to the correction of MR image bias field.

Planning Minimum-Energy Paths in an Off-Road Environment with Anisotropic Traversal Costs and Motion Constraints

DTIC Science & Technology

1989-06-01

problems, and (3) weighted-region problems. Since the minimum-energy path-planning problem addressed in this dissertation is a hybrid between the two...contains components that are strictly vehicle dependent, components that are strictly terrain dependent, and components representing a hybrid of...Single Segment Braking/Multiple Segment Hybrid Using Eq. (3.46), the traversal cost U 1,.-1 can be rewritten as Uop- 1 = mgD Itan01 , (4.12a) and the

A Study of the World’s Naval Surface-to-Air Missile Defense Systems.

DTIC Science & Technology

1984-12-01

in various installations to foreign radars, such as the Contraves SeaHunter, SanGiogio NA9. A light- weight , three-round launcher (based on the short... Losses . . . . . . . . . . . . . . 22 7- B. MINIMUM SIGNAL DETECTION . . . . . . . . . . . 22 1. Noise Figure F ......... ..... 25 2. Minimum Signal-to...idealized radar equation becomes Pr 4>, 2 (2. 11) a, 4 2. S Losses There are many sources of power loss in the echo, and these losses reduce the energy of

Finite element based stability-constrained weight minimization of sandwich composite ducts for airship applications

NASA Astrophysics Data System (ADS)

Khode, Urmi B.

High Altitude Long Endurance (HALE) airships are platform of interest due to their persistent observation and persistent communication capabilities. A novel HALE airship design configuration incorporates a composite sandwich propulsive hull duct between the front and the back of the hull for significant drag reduction via blown wake effects. The sandwich composite shell duct is subjected to hull pressure on its outer walls and flow suction on its inner walls which result in in-plane wall compressive stress, which may cause duct buckling. An approach based upon finite element stability analysis combined with a ply layup and foam thickness determination weight minimization search algorithm is utilized. Its goal is to achieve an optimized solution for the configuration of the sandwich composite as a solution to a constrained minimum weight design problem, for which the shell duct remains stable with a prescribed margin of safety under prescribed loading. The stability analysis methodology is first verified by comparing published analytical results for a number of simple cylindrical shell configurations with FEM counterpart solutions obtained using the commercially available code ABAQUS. Results show that the approach is effective in identifying minimum weight composite duct configurations for a number of representative combinations of duct geometry, composite material and foam properties, and propulsive duct applied pressure loading.

Numerical simulation of water evaporation inside vertical circular tubes

NASA Astrophysics Data System (ADS)

Ocłoń, Paweł; Nowak, Marzena; Majewski, Karol

2013-10-01

In this paper the results of simplified numerical analysis of water evaporation in vertical circular tubes are presented. The heat transfer in fluid domain (water or wet steam) and solid domain (tube wall) is analyzed. For the fluid domain the temperature field is calculated solving energy equation using the Control Volume Method and for the solid domain using the Finite Element Method. The heat transfer between fluid and solid domains is conjugated using the value of heat transfer coefficient from evaporating liquid to the tube wall. It is determined using the analytical Steiner-Taborek correlation. The pressure changes in fluid are computed using Friedel model.

In Brief: Monitoring ozone in Qatar

NASA Astrophysics Data System (ADS)

Showstack, Randy

2008-12-01

Qatar is establishing an ozone and pollution monitoring ground station in West Asia, following discussions between the government, the Qatar Foundation, and the United Nations Environment Programme, according to a 19 November announcement. The station will assist in understanding whether the ozone layer is actually recovering after being damaged by ozone-depleting chemicals. Qatar also announced plans to establish a global center of excellence for research and development of ozone and climate-friendly technology, equipment, and appliances. UNEP executive director Achim Steiner said the announcements by Qatar ``will help plug key data gaps relating to information gathering in West Asia and the Gulf to the benefit of the region and the world.''

Chiral dynamics with (non)strange quarks

NASA Astrophysics Data System (ADS)

Kubis, Bastian; Meißner, Ulf-G.

2017-01-01

We review the results and achievements of the project B.3. Topics addressed include pion photoproduction off the proton and off deuterium, three-flavor chiral perturbation theory studies, chiral symmetry tests in Goldstone boson decays, the development of unitarized chiral perturbation theory to next-to-leading order, the two-pole structure of the Λ(1405), the dynamical generation of the lowest S11 resonances, the theory of hadronic atoms and its application to various systems, precision studies in light-meson decays based on dispersion theory, the Roy-Steiner analysis of pion-nucleon scattering, a high-precision extraction of the elusive pion-nucleon σ-term, and aspects of chiral dynamics in few-nucleon systems.

Assessing the adequacy of essential nutrient intake in obese dogs undergoing energy restriction for weight loss: a cohort study.

PubMed

German, Alexander J; Holden, Shelley L; Serisier, Samuel; Queau, Yann; Biourge, Vincent

2015-10-07

Canine obesity is usually treated with dietary energy restriction, but data are limited regarding nutritional adequacy. The aim of the current study was to compare intake of essential nutrients with National Research Council recommendations in obese dogs during weight management with a purpose-formulated diet. Twenty-seven dogs were included in this non-randomised retrospective observational cohort study. All were determined to be systemically well, and without significant abnormalities based upon physical examination and clinicopathological assessments. The dogs underwent a controlled weight loss protocol of at least 182 days' duration using a high protein high fibre weight loss diet. Median, maximum, and minimum daily intakes of all essential nutrients were compared against NRC 2006 recommended allowances (RA) for adult dogs. Median weight loss was 28 % (16-40 %), mean daily energy intake was 61 kcal/kg(0.75) (44-74 kcal/kg(0.75)), and no clinical signs of nutrient deficiency were observed in any dog. Based upon the average nutrient content of the diet, daily intake of the majority of essential nutrients was greater than their NRC 2006 recommended allowance (RA per kg body weight(0.75)), except for selenium, choline, methionine/cysteine, tryptophan, magnesium, and potassium. However, apart from choline (2/27 dogs) and methionine/cysteine (2/27 dogs), all essential nutrients remained above NRC minimum requirements (MR) throughout the trial. When fed the diet used in the current study, daily intakes of most essential nutrients meet both their NRC 2006 RA and MR in obese dogs during weight loss. In light of absence of clinical signs of nutrient deficiency, it is unclear what significance intakes less that NRC cut-offs for some nutrients have (especially selenium and choline), and further studies are recommended.

Incorporating patient-preference evidence into regulatory decision making.

PubMed

Ho, Martin P; Gonzalez, Juan Marcos; Lerner, Herbert P; Neuland, Carolyn Y; Whang, Joyce M; McMurry-Heath, Michelle; Hauber, A Brett; Irony, Telba

2015-10-01

Patients have a unique role in deciding what treatments should be available for them and regulatory agencies should take their preferences into account when making treatment approval decisions. This is the first study designed to obtain quantitative patient-preference evidence to inform regulatory approval decisions by the Food and Drug Administration Center for Devices and Radiological Health. Five-hundred and forty United States adults with body mass index (BMI) ≥ 30 kg/m(2) evaluated tradeoffs among effectiveness, safety, and other attributes of weight-loss devices in a scientific survey. Discrete-choice experiments were used to quantify the importance of safety, effectiveness, and other attributes of weight-loss devices to obese respondents. A tool based on these measures is being used to inform benefit-risk assessments for premarket approval of medical devices. Respondent choices yielded preference scores indicating their relative value for attributes of weight-loss devices in this study. We developed a tool to estimate the minimum weight loss acceptable by a patient to receive a device with a given risk profile and the maximum mortality risk tolerable in exchange for a given weight loss. For example, to accept a device with 0.01 % mortality risk, a risk tolerant patient will require about 10 % total body weight loss lasting 5 years. Patient preference evidence was used make regulatory decision making more patient-centered. In addition, we captured the heterogeneity of patient preferences allowing market approval of effective devices for risk tolerant patients. CDRH is using the study tool to define minimum clinical effectiveness to evaluate new weight-loss devices. The methods presented can be applied to a wide variety of medical products. This study supports the ongoing development of a guidance document on incorporating patient preferences into medical-device premarket approval decisions.

DC-9/JT8D refan, Phase 1. [technical and economic feasibility of retrofitting DC-9 aircraft with refan engine to achieve desired acoustic levels

NASA Technical Reports Server (NTRS)

1973-01-01

Analyses and design studies were conducted on the technical and economic feasibility of installing the JT8D-109 refan engine on the DC-9 aircraft. Design criteria included minimum change to the airframe to achieve desired acoustic levels. Several acoustic configurations were studied with two selected for detailed investigations. The minimum selected acoustic treatment configuration results in an estimated aircraft weight increase of 608 kg (1,342 lb) and the maximum selected acoustic treatment configuration results in an estimated aircraft weight increase of 809 kg (1,784 lb). The range loss for the minimum and maximum selected acoustic treatment configurations based on long range cruise at 10 668 m (35,000 ft) altitude with a typical payload of 6 804 kg (15,000 lb) amounts to 54 km (86 n. mi.) respectively. Estimated reduction in EPNL's for minimum selected treatment show 8 EPNdB at approach, 12 EPNdB for takeoff with power cutback, 15 EPNdB for takeoff without power cutback and 12 EPNdB for sideline using FAR Part 36. Little difference was estimated in EPNL between minimum and maximum treatments due to reduced performance of maximum treatment. No major technical problems were encountered in the study. The refan concept for the DC-9 appears technically feasible and economically viable at approximately $1,000,000 per airplane. An additional study of the installation of JT3D-9 refan engine on the DC-8-50/61 and DC-8-62/63 aircraft is included. Three levels of acoustic treatment were suggested for DC-8-50/61 and two levels for DC-8-62/63. Results indicate the DC-8 technically can be retrofitted with refan engines for approximately $2,500,000 per airplane.

Box codes of lengths 48 and 72

NASA Technical Reports Server (NTRS)

Solomon, G.; Jin, Y.

1993-01-01

A self-dual code length 48, dimension 24, with Hamming distance essentially equal to 12 is constructed here. There are only six code words of weight eight. All the other code words have weights that are multiples of four and have a minimum weight equal to 12. This code may be encoded systematically and arises from a strict binary representation of the (8,4;5) Reed-Solomon (RS) code over GF (64). The code may be considered as six interrelated (8,7;2) codes. The Mattson-Solomon representation of the cyclic decomposition of these codes and their parity sums are used to detect an odd number of errors in any of the six codes. These may then be used in a correction algorithm for hard or soft decision decoding. A (72,36;15) box code was constructed from a (63,35;8) cyclic code. The theoretical justification is presented herein. A second (72,36;15) code is constructed from an inner (63,27;16) Bose Chaudhuri Hocquenghem (BCH) code and expanded to length 72 using box code algorithms for extension. This code was simulated and verified to have a minimum distance of 15 with even weight words congruent to zero modulo four. The decoding for hard and soft decision is still more complex than the first code constructed above. Finally, an (8,4;5) RS code over GF (512) in the binary representation of the (72,36;15) box code gives rise to a (72,36;16*) code with nine words of weight eight, and all the rest have weights greater than or equal to 16.

Factors affecting minimum push and pull forces of manual carts.

PubMed

Al-Eisawi, K W; Kerk, C J; Congleton, J J; Amendola, A A; Jenkins, O C; Gaines, W

1999-06-01

The minimum forces needed to manually push or pull a 4-wheel cart of differing weights with similar wheel sizes from a stationary state were measured on four floor materials under different conditions of wheel width, diameter, and orientation. Cart load was increased from 0 to 181.4 kg in increments of 36.3 kg. The floor materials were smooth concrete, tile, asphalt, and industrial carpet. Two wheel widths were tested: 25 and 38 mm. Wheel diameters were 51, 102, and 153 mm. Wheel orientation was tested at four levels: F0R0 (all four wheels aligned in the forward direction), F0R90 (the two front wheels, the wheels furthest from the cart handle, aligned in the forward direction and the two rear wheels, the wheels closest to the cart handle, aligned at 90 degrees to the forward direction), F90R0 (the two front wheels aligned at 90 degrees to the forward direction and the two rear wheels aligned in the forward direction), and F90R90 (all four wheels aligned at 90 degrees to the forward direction). Wheel width did not have a significant effect on the minimum push/pull forces. The minimum push/pull forces were linearly proportional to cart weight, and inversely proportional to wheel diameter. The coefficients of rolling friction were estimated as 2.2, 2.4, 3.3, and 4.5 mm for hard rubber wheels rolling on smooth concrete, tile, asphalt, and industrial carpet floors, respectively. The effect of wheel orientation was not consistent over the tested conditions, but, in general, the smallest minimum push/pull forces were measured with all four wheels aligned in the forward direction, whereas the largest minimum push/pull forces were measured when all four wheels were aligned at 90 degrees to the forward direction. There was no significant difference between the push and pull forces when all four wheels were aligned in the forward direction.

Development of post-harvest protocol of okra for export marketing.

PubMed

Dhall, R K; Sharma, S R; Mahajan, B V C

2014-08-01

The study was carried out on the harvesting and handling methods of okra with the objective to maintain the best quality of pods from harvesting to end consumer especially for export marketing. For that purpose okra cv. 'Punjab-8' pods were harvested with minimum handling (least injuries to the pubescence on the ridges of pod) and normal handling (no safety taken to prevent injuries on pods). Pods were precooled at 15 ± 1ºC, 90-95% RH; jumble packed in the CFB boxes of 2.0 Kg capacity and than stored at 8 ± 1ºC, 90-95% RH. The quality parameters of okra namely texture, chlorophyll content, physiological loss in weight, rotting percentage and general appearance were studied. The pods harvested with minimum handling and field packaging can retain their green colour, crisp texture (maximum force to puncture pod = 500.2 g) with minimum rotting (3.0%) and physiological loss in weight (15.8%) and good appearance upto 13 days of cold storage whereas normal handled pods can be stored upto 5 days at 8 ± 1ºC, 90-95% RH and thereafter lost their general appearance on the 7th day of storage and were discarded. Therefore, in order to maintain high quality of okra from harvesting to the final destination (consumer), the okra pods should be harvested with minimum handling followed by field packaging in CFB boxes.

40 CFR 180.1022 - Iodine-detergent complex; exemption from the requirement of a tolerance.

Code of Federal Regulations, 2014 CFR

2014-07-01

... the surfactants (a) polyoxypropylene-polyoxyethylene glycol nomionic block polymers (minimum average... molecular weight of 748 and in which the nonyl group is a propylene trimer isomer, is exempted from the...

40 CFR 180.1022 - Iodine-detergent complex; exemption from the requirement of a tolerance.

Code of Federal Regulations, 2013 CFR

2013-07-01

... the surfactants (a) polyoxypropylene-polyoxyethylene glycol nomionic block polymers (minimum average... molecular weight of 748 and in which the nonyl group is a propylene trimer isomer, is exempted from the...

40 CFR 180.1022 - Iodine-detergent complex; exemption from the requirement of a tolerance.

Code of Federal Regulations, 2012 CFR

2012-07-01

... the surfactants (a) polyoxypropylene-polyoxyethylene glycol nomionic block polymers (minimum average... molecular weight of 748 and in which the nonyl group is a propylene trimer isomer, is exempted from the...

HR 7578 - A K dwarf double-lined spectroscopic binary with peculiar abundances

NASA Technical Reports Server (NTRS)

Fekel, F. C., Jr.; Beavers, W. I.

1983-01-01

The number of double-lined K and M dwarf binaries which is currently known is quite small, only a dozen or less of each type. The HR 7578 system was classified as dK5 on the Mount Wilson system and as K2 V on the MK ystem. A summary of radial-velocity measurements including the observatory and weight of each observation is given in a table. The star with the stronger lines has been called component A. The final orbital element solution with all observations appropriately weighted was computed with a differential corrections computer program described by Barker et al. (1967). The program had been modified for the double-lined case. Of particular interest are the very large eccentricity of the system and the large minimum masses for each component. These large minimum masses suggest that eclipses may be detectable despite the relatively long period and small radii of the stars.

Chaos control of the brushless direct current motor using adaptive dynamic surface control based on neural network with the minimum weights.

PubMed

Luo, Shaohua; Wu, Songli; Gao, Ruizhen

2015-07-01

This paper investigates chaos control for the brushless DC motor (BLDCM) system by adaptive dynamic surface approach based on neural network with the minimum weights. The BLDCM system contains parameter perturbation, chaotic behavior, and uncertainty. With the help of radial basis function (RBF) neural network to approximate the unknown nonlinear functions, the adaptive law is established to overcome uncertainty of the control gain. By introducing the RBF neural network and adaptive technology into the dynamic surface control design, a robust chaos control scheme is developed. It is proved that the proposed control approach can guarantee that all signals in the closed-loop system are globally uniformly bounded, and the tracking error converges to a small neighborhood of the origin. Simulation results are provided to show that the proposed approach works well in suppressing chaos and parameter perturbation.

Design consideration for a nuclear electric propulsion system

NASA Technical Reports Server (NTRS)

Phillips, W. M.; Pawlik, E. V.

1978-01-01

A study is currently underway to design a nuclear electric propulsion vehicle capable of performing detailed exploration of the outer-planets. Primary emphasis is on the power subsystem. Secondary emphasis includes integration into a spacecraft, and integration with the thrust subsystem and science package or payload. The results of several design iterations indicate an all-heat-pipe system offers greater reliability, elimination of many technology development areas and a specific weight of under 20 kg/kWe at the 400 kWe power level. The system is compatible with a single Shuttle launch and provides greater safety than could be obtained with designs using pumped liquid metal cooling. Two configurations, one with the reactor and power conversion forward on the spacecraft with the ion engines aft and the other with reactor, power conversion and ion engines aft were selected as dual baseline designs based on minimum weight, minimum required technology development and maximum growth potential and flexibility.

Chaos control of the brushless direct current motor using adaptive dynamic surface control based on neural network with the minimum weights

DOE Office of Scientific and Technical Information (OSTI.GOV)

Luo, Shaohua; Department of Mechanical Engineering, Chongqing Aerospace Polytechnic, Chongqing, 400021; Wu, Songli

2015-07-15

This paper investigates chaos control for the brushless DC motor (BLDCM) system by adaptive dynamic surface approach based on neural network with the minimum weights. The BLDCM system contains parameter perturbation, chaotic behavior, and uncertainty. With the help of radial basis function (RBF) neural network to approximate the unknown nonlinear functions, the adaptive law is established to overcome uncertainty of the control gain. By introducing the RBF neural network and adaptive technology into the dynamic surface control design, a robust chaos control scheme is developed. It is proved that the proposed control approach can guarantee that all signals in themore » closed-loop system are globally uniformly bounded, and the tracking error converges to a small neighborhood of the origin. Simulation results are provided to show that the proposed approach works well in suppressing chaos and parameter perturbation.« less

Fast food prices, obesity, and the minimum wage.

PubMed

Cotti, Chad; Tefft, Nathan

2013-03-01

Recent proposals argue that a fast food tax may be an effective policy lever for reducing population weight. Although there is growing evidence for a negative association between fast food prices and weight among adolescents, less is known about adults. That any measured relationship to date is causal is unclear because there has been no attempt to separate variation in prices on the demand side from that on the supply side. We argue that the minimum wage is an exogenous source of variation in fast food prices, conditional on income and employment. In two-stage least-squares analyses, we find little evidence that fast food price changes affect adult BMI or obesity prevalence. Results are robust to including controls for area and time fixed effects, area time trends, demographic characteristics, substitute prices, numbers of establishments and employment in related industries, and other potentially related factors. Copyright © 2012 Elsevier B.V. All rights reserved.

Investigation of the Minimum Deployment Time of a Foam/Fabric Composite Material.

DTIC Science & Technology

1980-09-01

Kevlar Fabric! use xperienced, trained personnel. The pres- Polyurethane Foam Composites. TR M-272/ADA076310 sure containers should be adequately...evaluated. High molecular ponent foam producing materials. (Polyurethanes, weight resin performed best because its solubility char- epoxies, phenolics , and...that was coated to a total Because earlier CERL tests had established the weight of about 10 oz/sq yd (237 gm/m 2 ). strength of Kevlar * fabric, it was

Development and Test of HMPT-500

DTIC Science & Technology

1974-12-01

previot General Electric units in that reverse and low forward speeds use hydrostatic drive with the more efficient hydro- mechanical drive being...Infantry Combat Vehicle, X1723, having a gross weight of 40,000 pounds. 2. fabrication of a minimum of two HNPT-500 power trains capable of adaptation to...b. a 10,000-mile durability test with a vehicle of approximately 40,000 pounds weight . The detailed Scope of Work specified in the contract is

Application of Climate Impact Metrics to Rotorcraft Design

NASA Technical Reports Server (NTRS)

Russell, Carl; Johnson, Wayne

2013-01-01

Multiple metrics are applied to the design of large civil rotorcraft, integrating minimum cost and minimum environmental impact. The design mission is passenger transport with similar range and capacity to a regional jet. Separate aircraft designs are generated for minimum empty weight, fuel burn, and environmental impact. A metric specifically developed for the design of aircraft is employed to evaluate emissions. The designs are generated using the NDARC rotorcraft sizing code, and rotor analysis is performed with the CAMRAD II aeromechanics code. Design and mission parameters such as wing loading, disk loading, and cruise altitude are varied to minimize both cost and environmental impact metrics. This paper presents the results of these parametric sweeps as well as the final aircraft designs.

Application of Climate Impact Metrics to Civil Tiltrotor Design

NASA Technical Reports Server (NTRS)

Russell, Carl R.; Johnson, Wayne

2013-01-01

Multiple metrics are applied to the design of a large civil tiltrotor, integrating minimum cost and minimum environmental impact. The design mission is passenger transport with similar range and capacity to a regional jet. Separate aircraft designs are generated for minimum empty weight, fuel burn, and environmental impact. A metric specifically developed for the design of aircraft is employed to evaluate emissions. The designs are generated using the NDARC rotorcraft sizing code, and rotor analysis is performed with the CAMRAD II aeromechanics code. Design and mission parameters such as wing loading, disk loading, and cruise altitude are varied to minimize both cost and environmental impact metrics. This paper presents the results of these parametric sweeps as well as the final aircraft designs.

Research on configuration of railway self-equipped tanker based on minimum cost maximum flow model

NASA Astrophysics Data System (ADS)

Yang, Yuefang; Gan, Chunhui; Shen, Tingting

2017-05-01

In the study of the configuration of the tanker of chemical logistics park, the minimum cost maximum flow model is adopted. Firstly, the transport capacity of the park loading and unloading area and the transportation demand of the dangerous goods are taken as the constraint condition of the model; then the transport arc capacity, the transport arc flow and the transport arc edge weight are determined in the transportation network diagram; finally, the software calculations. The calculation results show that the configuration issue of the tankers can be effectively solved by the minimum cost maximum flow model, which has theoretical and practical application value for tanker management of railway transportation of dangerous goods in the chemical logistics park.

Synthetic Aperture Sonar Processing with MMSE Estimation of Image Sample Values

DTIC Science & Technology

2016-12-01

UNCLASSIFIED/UNLIMITED 13. SUPPLEMENTARY NOTES 14. ABSTRACT MMSE (minimum mean- square error) target sample estimation using non-orthogonal basis...orthogonal, they can still be used in a minimum mean‐ square  error (MMSE)  estimator that models the object echo as a weighted sum of the multi‐aspect basis...problem.                     3    Introduction      Minimum mean‐ square  error (MMSE) estimation is applied to target imaging with synthetic aperture

How well do WHO complementary feeding indicators relate to nutritional status of children aged 6-23 months in rural Northern Ghana?

PubMed

Saaka, Mahama; Wemakor, Anthony; Abizari, Abdul-Razak; Aryee, Paul

2015-11-23

Though the World Health Organization (WHO) recommended Infant and Young Child Feeding (IYCF) indicators have been in use, little is known about their association with child nutritional status. The objective of this study was to explore the relationship between IYCF indicators (timing of complementary feeding, minimum dietary diversity, minimum meal frequency and minimum acceptable diet) and child growth indicators. A community-based cross-sectional survey was carried out in November 2013. The study population comprised mothers/primary caregivers and their children selected using a two-stage cluster sampling procedure. Of the 1984 children aged 6-23 months; 58.2 % met the minimum meal frequency, 34.8 % received minimum dietary diversity (≥4 food groups), 27.8 % had received minimum acceptable diet and only 15.7 % received appropriate complementary feeding. With respect to nutritional status, 20.5 %, 11.5 % and 21.1 % of the study population were stunted, wasted and underweight respectively. Multiple logistic regression analysis revealed that compared to children who were introduced to complementary feeding either late or early, children who started complementary feeding at six months of age were 25 % protected from chronic malnutrition (AOR = 0.75, CI = 0.50 - 0.95, P = 0.02). It was found that children whose mothers attended antenatal care (ANC) at least 4 times were 34 % protected [AOR 0.66; 95 % CI (0.50 - 0.88)] against stunted growth compared to children born to mothers who attended ANC less than 4 times. Children from households with high household wealth index were 51 % protected [AOR 0.49; 95 % CI (0.26 - 0.94)] against chronic malnutrition compared to children from households with low household wealth index. After adjusting for potential confounders, there was a significant positive association between appropriate complementary feeding index and mean WLZ (β = 0.10, p = 0.005) but was not associated with mean LAZ. The WHO IYCF indicators better explain weight-for-length Z-scores than length-for-age Z-scores of young children in rural Northern Ghana. Furthermore, a composite indicator comprising timely introduction of solid, semi-solid or soft foods at 6 months, minimum meal frequency, and minimum dietary diversity better explains weight-for-length Z-scores than each of the single indicators.

Turboelectric Aircraft Drive Key Performance Parameters and Functional Requirements

NASA Technical Reports Server (NTRS)

Jansen, Ralph H.; Brown, Gerald V.; Felder, James L.; Duffy, Kirsten P.

2016-01-01

The purpose of this paper is to propose specific power and efficiency as the key performance parameters for a turboelectric aircraft power system and investigate their impact on the overall aircraft. Key functional requirements are identified that impact the power system design. Breguet range equations for a base aircraft and a turboelectric aircraft are found. The benefits and costs that may result from the turboelectric system are enumerated. A break-even analysis is conducted to find the minimum allowable electric drive specific power and efficiency that can preserve the range, initial weight, operating empty weight, and payload weight of the base aircraft.

Turboelectric Aircraft Drive Key Performance Parameters and Functional Requirements

NASA Technical Reports Server (NTRS)

Jansen, Ralph; Brown, Gerald V.; Felder, James L.; Duffy, Kirsten P.

2015-01-01

The purpose of this presentation is to propose specific power and efficiency as the key performance parameters for a turboelectric aircraft power system and investigate their impact on the overall aircraft. Key functional requirements are identified that impact the power system design. Breguet range equations for a base aircraft and a turboelectric aircraft are found. The benefits and costs that may result from the turboelectric system are enumerated. A break-even analysis is conducted to find the minimum allowable electric drive specific power and efficiency that can preserve the range, initial weight, operating empty weight, and payload weight of the base aircraft.

Turboelectric Aircraft Drive Key Performance Parameters and Functional Requirements

NASA Technical Reports Server (NTRS)

Jansen, Ralph H.; Brown, Gerald V.; Felder, James L.; Duffy, Kirsten P.

2015-01-01

The purpose of this paper is to propose specific power and efficiency as the key performance parameters for a turboelectric aircraft power system and investigate their impact on the overall aircraft. Key functional requirements are identified that impact the power system design. Breguet range equations for a base aircraft and a turboelectric aircraft are found. The benefits and costs that may result from the turboelectric system are enumerated. A break-even analysis is conducted to find the minimum allowable electric drive specific power and efficiency that can preserve the range, initial weight, operating empty weight, and payload weight of the base aircraft.

Reduction of minimum required weight of cementitious materials in WisDOT concrete mixes.

DOT National Transportation Integrated Search

2011-12-01

"This project was designed to explore the feasibility of lowering the cementitious materials content : (CMC) used in Wisconsin concrete pavement construction. The cementitious materials studied included : portland cement, fly ash, and ground granulat...

Reduction of minimum required weight of cementitious materials in WisDOT concrete mixes.

DOT National Transportation Integrated Search

2011-12-01

This project was designed to explore the feasibility of lowering the cementitious materials content : (CMC) used in Wisconsin concrete pavement construction. The cementitious materials studied included : portland cement, fly ash, and ground granulate...

Diesel-Powered Heavy-Duty Refrigeration Unit Noise

DOT National Transportation Integrated Search

1976-01-01

A series of noise measurements were performed on a diesel-powered heavy-duty refrigeration unit. Noise survey information collected included: polar plots of the 'A Weighted' noise levels of the unit under maximum and minimum load conditions; a linear...

Engineering of Fast and Robust Adaptive Control for Fixed-Wing Unmanned Aircraft

DTIC Science & Technology

2017-06-01

12.6volts) lithium polymer batteries wired in parallel. The remaining cargo space was used for accommodating the Pixhawk autopilot. 33 Figure 4.3...was achievable under four hours of build time. 4.4.1 Spear Specifications • weight without battery : 1.45 lbs (658 g) • center of gravity: 3 – 3.5” (76...motor: 425 sized, 1200 kv minimum • prop: 9 x 4.5 CW (reverse) prop • electronic speed control (ESC): 30 amp minimum • battery : (2) 2200 mAH 12.6 volt

Prevalence and factors associated with overweight among Brazilian children younger than 2 years.

PubMed

Cocetti, Monize; Taddei, José Augusto de A C; Konstantyner, Tulio; Konstantyner, Thais Claudia Roma de Oliveira; Barros Filho, Antonio Azevedo

2012-01-01

To describe the prevalence of overweight, analyze its progression from 1989 to 2006 and identify factors associated with it among children younger than two years in Brazil. Data for the Women and Children National Demography and Health Survey (PNDS 2006) were collected using questionnaires and anthropometric measurements. The study sample included 1,735 children aged 0 to 24 months (910 boys; 825 girls). Nutritional status was defined according to the weight-for-height index (W/H; WHO, 2006), and children were classified as overweight if their W/H z score was greater than +2. Prevalence of overweight in Brazil was 6.54%. The highest prevalence of overweight was found in the southern (10.0%) and midwestern (11.1%) regions, among families with a per capita income higher than one minimum wage (11.8%), in social classes with a greater purchasing power (9.7%), among children whose birth weight was greater than 3 kg (8.04%) and whose exclusive breastfeeding lasted less than five months (7.4%). According to a fitted multiple logistic regression model, factors associated with overweight were: birth weight ≥ 3 kg [odds ratio (OR) = 5.2, 95% confidence interval (95%CI) 2.56-10.56], per capita income ≥ 1 minimum wage (OR = 2.50, 95%CI 1.20-5.21), residence in midwestern region (OR = 2.40, 95%CI 1.01-5.72). The comparison of the prevalence found in the 2006 survey with the 1989 and 1996 values revealed that overweight among children younger than two years tends to decrease. The risk factors identified suggest that further actions should be conducted to prevent obesity among infants living in the midwestern region of Brazil, whose birth weight was greater than 3 kg and whose families had a per capita income higher than one minimum wage.

Optimizing conceptual aircraft designs for minimum life cycle cost

NASA Technical Reports Server (NTRS)

Johnson, Vicki S.

1989-01-01

A life cycle cost (LCC) module has been added to the FLight Optimization System (FLOPS), allowing the additional optimization variables of life cycle cost, direct operating cost, and acquisition cost. Extensive use of the methodology on short-, medium-, and medium-to-long range aircraft has demonstrated that the system works well. Results from the study show that optimization parameter has a definite effect on the aircraft, and that optimizing an aircraft for minimum LCC results in a different airplane than when optimizing for minimum take-off gross weight (TOGW), fuel burned, direct operation cost (DOC), or acquisition cost. Additionally, the economic assumptions can have a strong impact on the configurations optimized for minimum LCC or DOC. Also, results show that advanced technology can be worthwhile, even if it results in higher manufacturing and operating costs. Examining the number of engines a configuration should have demonstrated a real payoff of including life cycle cost in the conceptual design process: the minimum TOGW of fuel aircraft did not always have the lowest life cycle cost when considering the number of engines.

Iterative Minimum Variance Beamformer with Low Complexity for Medical Ultrasound Imaging.

PubMed

Deylami, Ali Mohades; Asl, Babak Mohammadzadeh

2018-06-04

Minimum variance beamformer (MVB) improves the resolution and contrast of medical ultrasound images compared with delay and sum (DAS) beamformer. The weight vector of this beamformer should be calculated for each imaging point independently, with a cost of increasing computational complexity. The large number of necessary calculations limits this beamformer to application in real-time systems. A beamformer is proposed based on the MVB with lower computational complexity while preserving its advantages. This beamformer avoids matrix inversion, which is the most complex part of the MVB, by solving the optimization problem iteratively. The received signals from two imaging points close together do not vary much in medical ultrasound imaging. Therefore, using the previously optimized weight vector for one point as initial weight vector for the new neighboring point can improve the convergence speed and decrease the computational complexity. The proposed method was applied on several data sets, and it has been shown that the method can regenerate the results obtained by the MVB while the order of complexity is decreased from O(L 3 ) to O(L 2 ). Copyright © 2018 World Federation for Ultrasound in Medicine and Biology. Published by Elsevier Inc. All rights reserved.

WEAMR — A Weighted Energy Aware Multipath Reliable Routing Mechanism for Hotline-Based WSNs

PubMed Central

Tufail, Ali; Qamar, Arslan; Khan, Adil Mehmood; Baig, Waleed Akram; Kim, Ki-Hyung

2013-01-01

Reliable source to sink communication is the most important factor for an efficient routing protocol especially in domains of military, healthcare and disaster recovery applications. We present weighted energy aware multipath reliable routing (WEAMR), a novel energy aware multipath routing protocol which utilizes hotline-assisted routing to meet such requirements for mission critical applications. The protocol reduces the number of average hops from source to destination and provides unmatched reliability as compared to well known reactive ad hoc protocols i.e., AODV and AOMDV. Our protocol makes efficient use of network paths based on weighted cost calculation and intelligently selects the best possible paths for data transmissions. The path cost calculation considers end to end number of hops, latency and minimum energy node value in the path. In case of path failure path recalculation is done efficiently with minimum latency and control packets overhead. Our evaluation shows that our proposal provides better end-to-end delivery with less routing overhead and higher packet delivery success ratio compared to AODV and AOMDV. The use of multipath also increases overall life time of WSN network using optimum energy available paths between sender and receiver in WDNs. PMID:23669714

WEAMR-a weighted energy aware multipath reliable routing mechanism for hotline-based WSNs.

PubMed

Tufail, Ali; Qamar, Arslan; Khan, Adil Mehmood; Baig, Waleed Akram; Kim, Ki-Hyung

2013-05-13

Reliable source to sink communication is the most important factor for an efficient routing protocol especially in domains of military, healthcare and disaster recovery applications. We present weighted energy aware multipath reliable routing (WEAMR), a novel energy aware multipath routing protocol which utilizes hotline-assisted routing to meet such requirements for mission critical applications. The protocol reduces the number of average hops from source to destination and provides unmatched reliability as compared to well known reactive ad hoc protocols i.e., AODV and AOMDV. Our protocol makes efficient use of network paths based on weighted cost calculation and intelligently selects the best possible paths for data transmissions. The path cost calculation considers end to end number of hops, latency and minimum energy node value in the path. In case of path failure path recalculation is done efficiently with minimum latency and control packets overhead. Our evaluation shows that our proposal provides better end-to-end delivery with less routing overhead and higher packet delivery success ratio compared to AODV and AOMDV. The use of multipath also increases overall life time of WSN network using optimum energy available paths between sender and receiver in WDNs.

Minimum nonuniform graph partitioning with unrelated weights

NASA Astrophysics Data System (ADS)

Makarychev, K. S.; Makarychev, Yu S.

2017-12-01

We give a bi-criteria approximation algorithm for the Minimum Nonuniform Graph Partitioning problem, recently introduced by Krauthgamer, Naor, Schwartz and Talwar. In this problem, we are given a graph G=(V,E) and k numbers ρ_1,\\dots, ρ_k. The goal is to partition V into k disjoint sets (bins) P_1,\\dots, P_k satisfying \\vert P_i\\vert≤ ρi \\vert V\\vert for all i, so as to minimize the number of edges cut by the partition. Our bi-criteria algorithm gives an O(\\sqrt{log \\vert V\\vert log k}) approximation for the objective function in general graphs and an O(1) approximation in graphs excluding a fixed minor. The approximate solution satisfies the relaxed capacity constraints \\vert P_i\\vert ≤ (5+ \\varepsilon)ρi \\vert V\\vert. This algorithm is an improvement upon the O(log \\vert V\\vert)-approximation algorithm by Krauthgamer, Naor, Schwartz and Talwar. We extend our results to the case of 'unrelated weights' and to the case of 'unrelated d-dimensional weights'. A preliminary version of this work was presented at the 41st International Colloquium on Automata, Languages and Programming (ICALP 2014). Bibliography: 7 titles.

A new enhanced index tracking model in portfolio optimization with sum weighted approach

NASA Astrophysics Data System (ADS)

Siew, Lam Weng; Jaaman, Saiful Hafizah; Hoe, Lam Weng

2017-04-01

Index tracking is a portfolio management which aims to construct the optimal portfolio to achieve similar return with the benchmark index return at minimum tracking error without purchasing all the stocks that make up the index. Enhanced index tracking is an improved portfolio management which aims to generate higher portfolio return than the benchmark index return besides minimizing the tracking error. The objective of this paper is to propose a new enhanced index tracking model with sum weighted approach to improve the existing index tracking model for tracking the benchmark Technology Index in Malaysia. The optimal portfolio composition and performance of both models are determined and compared in terms of portfolio mean return, tracking error and information ratio. The results of this study show that the optimal portfolio of the proposed model is able to generate higher mean return than the benchmark index at minimum tracking error. Besides that, the proposed model is able to outperform the existing model in tracking the benchmark index. The significance of this study is to propose a new enhanced index tracking model with sum weighted apporach which contributes 67% improvement on the portfolio mean return as compared to the existing model.

On development of an inexpensive, lightweight thermal micrometeroid garment for space suits

NASA Technical Reports Server (NTRS)

1975-01-01

A lightweight and inexpensive coverlayer developed for space suits is described. Material selection, procurement, and testing, pattern design, and prototype fabrication are discussed. By using the minimum required cross section necessary for earth orbital mission, by utilizing the lightest weight materials possible, and by decreasing the use of weight costly taping a lightweight and economical thermal micrometeroid garment was developed. Simplification of manufacturing techniques and use of off-the-shelf materials helped to reduce costs.

49 CFR 393.110 - What else do I have to do to determine the minimum number of tiedowns?

Code of Federal Regulations, 2011 CFR

2011-10-01

... articles 5 feet (1.52 meters) or less in length, and 1,100 pounds (500 kg) or less in weight; (2) Two tiedowns if the article is: (i) 5 feet (1.52 meters) or less in length and more than 1,100 pounds (500 kg) in weight; or (ii) Longer than 5 feet (1.52 meters) but less than or equal to 10 feet (3.04 meters...

Conformal Cryogenic Tank Trade Study for Reusable Launch Vehicles

NASA Technical Reports Server (NTRS)

Rivers, H. Kevin

1999-01-01

Future reusable launch vehicles may be lifting bodies with non-circular cross section like the proposed Lockheed-Martin VentureStar(tm). Current designs for the cryogenic tanks of these vehicles are dual-lobed and quad-lobed tanks which are packaged more efficiently than circular tanks, but still have low packaging efficiencies with large gaps existing between the vehicle outer mold line and the outer surfaces of the tanks. In this study, tanks that conform to the outer mold line of a non-circular vehicle were investigated. Four structural concepts for conformal cryogenic tanks and a quad-lobed tank concept were optimized for minimum weight designs. The conformal tank concepts included a sandwich tank stiffened with axial tension webs, a sandwich tank stiffened with transverse tension webs, a sandwich tank stiffened with rings and tension ties, and a sandwich tank stiffened with orthogrid stiffeners and tension ties. For each concept, geometric parameters (such as ring frame spacing, the number and spacing of tension ties or webs, and tank corner radius) and internal pressure loads were varied and the structure was optimized using a finite-element-based optimization procedure. Theoretical volumetric weights were calculated by dividing the weight of the barrel section of the tank concept and its associated frames, webs and tension ties by the volume it circumscribes. This paper describes the four conformal tank concepts and the design assumptions utilized in their optimization. The conformal tank optimization results included theoretical weights, trends and comparisons between the concepts, are also presented, along with results from the optimization of a quad-lobed tank. Also, the effects of minimum gauge values and non-optimum weights on the weight of the optimized structure are described in this paper.

Computer program optimizes design of nuclear radiation shields

NASA Technical Reports Server (NTRS)

Lahti, G. P.

1971-01-01

Computer program, OPEX 2, determines minimum weight, volume, or cost for shields. Program incorporates improved coding, simplified data input, spherical geometry, and an expanded output. Method is capable of altering dose-thickness relationship when a shield layer has been removed.

On the ππ continuum in the nucleon form factors and the proton radius puzzle

NASA Astrophysics Data System (ADS)

Hoferichter, M.; Kubis, B.; Ruiz de Elvira, J.; Hammer, H.-W.; Meißner, U.-G.

2016-11-01

We present an improved determination of the ππ continuum contribution to the isovector spectral functions of the nucleon electromagnetic form factors. Our analysis includes the most up-to-date results for the ππ→bar{N} N partial waves extracted from Roy-Steiner equations, consistent input for the pion vector form factor, and a thorough discussion of isospin-violating effects and uncertainty estimates. As an application, we consider the ππ contribution to the isovector electric and magnetic radii by means of sum rules, which, in combination with the accurately known neutron electric radius, are found to slightly prefer a small proton charge radius.

One-dimensional Gromov minimal filling problem

NASA Astrophysics Data System (ADS)

Ivanov, Alexandr O.; Tuzhilin, Alexey A.

2012-05-01

The paper is devoted to a new branch in the theory of one-dimensional variational problems with branching extremals, the investigation of one-dimensional minimal fillings introduced by the authors. On the one hand, this problem is a one-dimensional version of a generalization of Gromov's minimal fillings problem to the case of stratified manifolds. On the other hand, this problem is interesting in itself and also can be considered as a generalization of another classical problem, the Steiner problem on the construction of a shortest network connecting a given set of terminals. Besides the statement of the problem, we discuss several properties of the minimal fillings and state several conjectures. Bibliography: 38 titles.

Ernst Haeckel's biodynamics 1866 and the occult basis of organic farming

PubMed Central

Kutschera, Ulrich

2016-01-01

ABSTRACT One hundred and 50 years ago (Sept. 1866), Ernst Haeckel published a monograph entitled General Morphology of Organisms, wherein key terms, such as Protista, Monera, ontogeny, phylogeny, ecology and the ‘biogenetic law’ where introduced. In addition, Haeckel coined the word “biodynamics” as a synonym for “general physiology.” In contrast, Rudolf Steiner's “biodynamic agriculture,” which originated in 1924, and was promoted via Ehrenfried Pfeiffer's book of 1938 with the same title, is an occult pseudoscience still popular today. The misuse of Haeckel's term to legitimize disproven homeopathic principles and esoteric rules within the context of applied plant research is unacceptable. PMID:27322020

Prevalence and predictors of premenstrual syndrome and premenstrual dysphoric disorder in a population-based sample.

PubMed

Tschudin, Sibil; Bertea, Paola Coda; Zemp, Elisabeth

2010-12-01

The study aimed at assessing the prevalence of premenstrual symptoms and of premenstrual syndrome (PMS) and premenstrual dysphoric disorder (PMDD) in a population-based sample of women of the entire reproductive age range, as well as to analyse predictors of PMS and PMDD in terms of socio-demographic, health status and health behavioural factors. A set of questions on PMS-based on the premenstrual syndrome screening tool developed by Steiner et al., translated into German and piloted-was integrated into the written questionnaire of the 2007 Swiss Health Survey. Weighted prevalence rates and multivariable regression analysis for the outcome variables PMS and PMDD were calculated. A total of 3,913 women aged 15 to 54 years answered the questions on PMS symptoms, and 3,522 of them additionally answered the questions on interference of PMS with life. Ninety one percent of the participants reported at least one symptom, 10.3% had PMS and 3.1% fulfilled the criteria for PMDD. The prevalence of PMS was higher in non-married women, in women aged 35-44 years and in women of the Italian-speaking region of Switzerland. Both PMS and PMDD were strongly associated with poor physical health and psychological distress. Socio-cultural factors seem to determine the prevalence, perception and handling of PMS. Considering the association with poor physical health and high psychological distress, a broader underlying vulnerability in women qualifying for PMDD must be assumed and should be taken into account in clinical management as well as in future research in this field.

Systems and Methods for Derivative-Free Adaptive Control

NASA Technical Reports Server (NTRS)

Calise, Anthony J. (Inventor); Yucelen, Tansel (Inventor); Kim, Kilsoo (Inventor)

2015-01-01

An adaptive control system is disclosed. The control system can control uncertain dynamic systems. The control system can employ one or more derivative-free adaptive control architectures. The control system can further employ one or more derivative-free weight update laws. The derivative-free weight update laws can comprise a time-varying estimate of an ideal vector of weights. The control system of the present invention can therefore quickly stabilize systems that undergo sudden changes in dynamics, caused by, for example, sudden changes in weight. Embodiments of the present invention can also provide a less complex control system than existing adaptive control systems. The control system can control aircraft and other dynamic systems, such as, for example, those with non-minimum phase dynamics.

Impulsive noise suppression in color images based on the geodesic digital paths

NASA Astrophysics Data System (ADS)

Smolka, Bogdan; Cyganek, Boguslaw

2015-02-01

In the paper a novel filtering design based on the concept of exploration of the pixel neighborhood by digital paths is presented. The paths start from the boundary of a filtering window and reach its center. The cost of transitions between adjacent pixels is defined in the hybrid spatial-color space. Then, an optimal path of minimum total cost, leading from pixels of the window's boundary to its center is determined. The cost of an optimal path serves as a degree of similarity of the central pixel to the samples from the local processing window. If a pixel is an outlier, then all the paths starting from the window's boundary will have high costs and the minimum one will also be high. The filter output is calculated as a weighted mean of the central pixel and an estimate constructed using the information on the minimum cost assigned to each image pixel. So, first the costs of optimal paths are used to build a smoothed image and in the second step the minimum cost of the central pixel is utilized for construction of the weights of a soft-switching scheme. The experiments performed on a set of standard color images, revealed that the efficiency of the proposed algorithm is superior to the state-of-the-art filtering techniques in terms of the objective restoration quality measures, especially for high noise contamination ratios. The proposed filter, due to its low computational complexity, can be applied for real time image denoising and also for the enhancement of video streams.

Predicting the Size of Sunspot Cycle 24 on the Basis of Single- and Bi-Variate Geomagnetic Precursor Methods

NASA Technical Reports Server (NTRS)

Wilson, Robert M.; Hathaway, David H.

2009-01-01

Examined are single- and bi-variate geomagnetic precursors for predicting the maximum amplitude (RM) of a sunspot cycle several years in advance. The best single-variate fit is one based on the average of the ap index 36 mo prior to cycle minimum occurrence (E(Rm)), having a coefficient of correlation (r) equal to 0.97 and a standard error of estimate (se) equal to 9.3. Presuming cycle 24 not to be a statistical outlier and its minimum in March 2008, the fit suggests cycle 24 s RM to be about 69 +/- 20 (the 90% prediction interval). The weighted mean prediction of 11 statistically important single-variate fits is 116 +/- 34. The best bi-variate fit is one based on the maximum and minimum values of the 12-mma of the ap index; i.e., APM# and APm*, where # means the value post-E(RM) for the preceding cycle and * means the value in the vicinity of cycle minimum, having r = 0.98 and se = 8.2. It predicts cycle 24 s RM to be about 92 +/- 27. The weighted mean prediction of 22 statistically important bi-variate fits is 112 32. Thus, cycle 24's RM is expected to lie somewhere within the range of about 82 to 144. Also examined are the late-cycle 23 behaviors of geomagnetic indices and solar wind velocity in comparison to the mean behaviors of cycles 2023 and the geomagnetic indices of cycle 14 (RM = 64.2), the weakest sunspot cycle of the modern era.

Anticipating Cycle 24 Minimum and its Consequences: An Update

NASA Technical Reports Server (NTRS)

Wilson, Robert M.; Hathaway, David H.

2008-01-01

This Technical Publication updates estimates for cycle 24 minimum and discusses consequences associated with cycle 23 being a longer than average period cycle and cycle 24 having parametric minimum values smaller (or larger for the case of spotless days) than long term medians. Through December 2007, cycle 23 has persisted 140 mo from its 12-mo moving average (12-mma) minimum monthly mean sunspot number occurrence date (May 1996). Longer than average period cycles of the modern era (since cycle 12) have minimum-to-minimum periods of about 139.0+/-6.3 mo (the 90-percent prediction interval), inferring that cycle 24 s minimum monthly mean sunspot number should be expected before July 2008. The major consequence of this is that, unless cycle 24 is a statistical outlier (like cycle 21), its maximum amplitude (RM) likely will be smaller than previously forecast. If, however, in the course of its rise cycle 24 s 12-mma of the weighted mean latitude (L) of spot groups exceeds 24 deg, then one expects RM >131, and if its 12-mma of highest latitude (H) spot groups exceeds 38 deg, then one expects RM >127. High-latitude new cycle spot groups, while first reported in January 2008, have not, as yet, become the dominant form of spot groups. Minimum values in L and H were observed in mid 2007 and values are now slowly increasing, a precondition for the imminent onset of the new sunspot cycle.

Key Performance Parameter Driven Technology Goals for Electric Machines and Power Systems

NASA Technical Reports Server (NTRS)

Bowman, Cheryl; Jansen, Ralph; Brown, Gerald; Duffy, Kirsten; Trudell, Jeffrey

2015-01-01

Transitioning aviation to low carbon propulsion is one of the crucial strategic research thrust and is a driver in the search for alternative propulsion system for advanced aircraft configurations. This work requires multidisciplinary skills coming from multiple entities. The feasibility of scaling up various electric drive system technologies to meet the requirements of a large commercial transport is discussed in terms of key parameters. Functional requirements are identified that impact the power system design. A breakeven analysis is presented to find the minimum allowable electric drive specific power and efficiency that can preserve the range, initial weight, operating empty weight, and payload weight of the base aircraft.

Aerodynamic and structural studies of joined-wing aircraft

NASA Technical Reports Server (NTRS)

Kroo, Ilan; Smith, Stephen; Gallman, John

1991-01-01

A method for rapidly evaluating the structural and aerodynamic characteristics of joined-wing aircraft was developed and used to study the fundamental advantages attributed to this concept. The technique involves a rapid turnaround aerodynamic analysis method for computing minimum trimmed drag combined with a simple structural optimization. A variety of joined-wing designs are compared on the basis of trimmed drag, structural weight, and, finally, trimmed drag with fixed structural weight. The range of joined-wing design parameters resulting in best cruise performance is identified. Structural weight savings and net drag reductions are predicted for certain joined-wing configurations compared with conventional cantilever-wing configurations.

7 CFR 51.311 - Marking requirements.

Code of Federal Regulations, 2014 CFR

2014-01-01

... (INSPECTION, CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Marking Requirements...), grade, and the numerical count or minimum diameter of apples packed in a closed container shall be indicated on the container. For apple lots utilizing the combined diameter/weight designations for Red...

7 CFR 51.311 - Marking requirements.

Code of Federal Regulations, 2013 CFR

2013-01-01

... (INSPECTION, CERTIFICATION, AND STANDARDS) United States Standards for Grades of Apples Marking Requirements...), grade, and the numerical count or minimum diameter of apples packed in a closed container shall be indicated on the container. For apple lots utilizing the combined diameter/weight designations for Red...

The Mobility Decision. 1990 Wheelchair Guide.

ERIC Educational Resources Information Center

Henke, Cliff

1990-01-01

This article presents tips for parents shopping for wheelchairs for children with special mobility needs. Manual versus power chairs, dimensions, maneuverability, weight, transportability, durability, adaptability, maximum/minimum speeds, battery life (for power chairs), climbing angle, and other features are discussed. Factors to consider in…

Part weight verification between simulation and experiment of plastic part in injection moulding process

NASA Astrophysics Data System (ADS)

Amran, M. A. M.; Idayu, N.; Faizal, K. M.; Sanusi, M.; Izamshah, R.; Shahir, M.

2016-11-01

In this study, the main objective is to determine the percentage difference of part weight between experimental and simulation work. The effect of process parameters on weight of plastic part is also investigated. The process parameters involved were mould temperature, melt temperature, injection time and cooling time. Autodesk Simulation Moldflow software was used to run the simulation of the plastic part. Taguchi method was selected as Design of Experiment to conduct the experiment. Then, the simulation result was validated with the experimental result. It was found that the minimum and maximum percentage of differential of part weight between simulation and experimental work are 0.35 % and 1.43 % respectively. In addition, the most significant parameter that affected part weight is the mould temperature, followed by melt temperature, injection time and cooling time.

Metalclad Airship Hull Study. Volume 1 and Volume 2

DTIC Science & Technology

1976-12-01

37.5% weight saving of the hull skin with a maximim pressure of 8.75 in. of water column and maximum-minimum pressure ratio still at comfortable 3.5. The...overall height of 118.98 in.to no more than 100.Oin. with considerable weight saving . Instead of the geometrical height of main frames equal to (.108...changed slightly to obtain uniform spacing. This has negligible effect on the result, but saves a considerable analysis timie. For the purpose of this

Nonlinear program based optimization of boost and buck-boost converter designs

NASA Astrophysics Data System (ADS)

Rahman, S.; Lee, F. C.

The facility of an Augmented Lagrangian (ALAG) multiplier based nonlinear programming technique is demonstrated for minimum-weight design optimizations of boost and buck-boost power converters. Certain important features of ALAG are presented in the framework of a comprehensive design example for buck-boost power converter design optimization. The study provides refreshing design insight of power converters and presents such information as weight and loss profiles of various semiconductor components and magnetics as a function of the switching frequency.

Weighted network analysis of high-frequency cross-correlation measures

NASA Astrophysics Data System (ADS)

Iori, Giulia; Precup, Ovidiu V.

2007-03-01

In this paper we implement a Fourier method to estimate high-frequency correlation matrices from small data sets. The Fourier estimates are shown to be considerably less noisy than the standard Pearson correlation measures and thus capable of detecting subtle changes in correlation matrices with just a month of data. The evolution of correlation at different time scales is analyzed from the full correlation matrix and its minimum spanning tree representation. The analysis is performed by implementing measures from the theory of random weighted networks.

Multidisciplinary tailoring of hot composite structures

NASA Technical Reports Server (NTRS)

Singhal, Surendra N.; Chamis, Christos C.

1993-01-01

A computational simulation procedure is described for multidisciplinary analysis and tailoring of layered multi-material hot composite engine structural components subjected to simultaneous multiple discipline-specific thermal, structural, vibration, and acoustic loads. The effect of aggressive environments is also simulated. The simulation is based on a three-dimensional finite element analysis technique in conjunction with structural mechanics codes, thermal/acoustic analysis methods, and tailoring procedures. The integrated multidisciplinary simulation procedure is general-purpose including the coupled effects of nonlinearities in structure geometry, material, loading, and environmental complexities. The composite material behavior is assessed at all composite scales, i.e., laminate/ply/constituents (fiber/matrix), via a nonlinear material characterization hygro-thermo-mechanical model. Sample tailoring cases exhibiting nonlinear material/loading/environmental behavior of aircraft engine fan blades, are presented. The various multidisciplinary loads lead to different tailored designs, even those competing with each other, as in the case of minimum material cost versus minimum structure weight and in the case of minimum vibration frequency versus minimum acoustic noise.

Economic policy and the double burden of malnutrition: cross-national longitudinal analysis of minimum wage and women's underweight and obesity.

PubMed

Conklin, Annalijn I; Ponce, Ninez A; Crespi, Catherine M; Frank, John; Nandi, Arijit; Heymann, Jody

2018-04-01

To examine changes in minimum wage associated with changes in women's weight status. Longitudinal study of legislated minimum wage levels (per month, purchasing power parity-adjusted, 2011 constant US dollar values) linked to anthropometric and sociodemographic data from multiple Demographic and Health Surveys (2000-2014). Separate multilevel models estimated associations of a $10 increase in monthly minimum wage with the rate of change in underweight and obesity, conditioning on individual and country confounders. Post-estimation analysis computed predicted mean probabilities of being underweight or obese associated with higher levels of minimum wage at study start and end. Twenty-four low-income countries. Adult non-pregnant women (n 150 796). Higher minimum wages were associated (OR; 95 % CI) with reduced underweight in women (0·986; 0·977, 0·995); a decrease that accelerated over time (P-interaction=0·025). Increasing minimum wage was associated with higher obesity (1·019; 1·008, 1·030), but did not alter the rate of increase in obesity prevalence (P-interaction=0·8). A $10 rise in monthly minimum wage was associated (prevalence difference; 95 % CI) with an average decrease of about 0·14 percentage points (-0·14; -0·23, -0·05) for underweight and an increase of about 0·1 percentage points (0·12; 0·04, 0·20) for obesity. The present longitudinal multi-country study showed that a $10 rise in monthly minimum wage significantly accelerated the decline in women's underweight prevalence, but had no association with the pace of growth in obesity prevalence. Thus, modest rises in minimum wage may be beneficial for addressing the protracted underweight problem in poor countries, especially South Asia and parts of Africa.

Elite athletes in aesthetic and Olympic weight-class sports and the challenge of body weight and body compositions.

PubMed

Sundgot-Borgen, Jorunn; Garthe, Ina

2011-01-01

The use of dieting, rapid weight loss, and frequent weight fluctuation among athletes competing in weight-class and leanness sports have been considered a problem for years, but the extent of the problem and the health and performance consequences have yet to be fully examined. Most studies examining these issues have had weak methodology. However, results from this review indicate that a high proportion of athletes are using extreme weight-control methods and that the rules of some sports might be associated with the risk of continuous dieting, energy deficit, and/or use of extreme weight-loss methods that can be detrimental to health and performance. Thus, preventive strategies are justified for medical as well as performance reasons. The most urgent needs are: (1) to develop sport-specific educational programmes for athletic trainers, coaches, and athletes; (2) modifications to regulations; and (3) research related to minimum percentage body fat and judging patterns.

Scanning mirror for infrared sensors

NASA Technical Reports Server (NTRS)

Anderson, R. H.; Bernstein, S. B.

1972-01-01

A high resolution, long life angle-encoded scanning mirror, built for application in an infrared attitude sensor, is described. The mirror uses a Moire' fringe type optical encoder and unique torsion bar suspension together with a magnetic drive to meet stringent operational and environmental requirements at a minimum weight and with minimum power consumption. Details of the specifications, design, and construction are presented with an analysis of the mirror suspension that allows accurate prediction of performance. The emphasis is on mechanical design considerations, and brief discussions are included on the encoder and magnetic drive to provide a complete view of the mirror system and its capabilities.

A firefly algorithm for optimum design of new-generation beams

NASA Astrophysics Data System (ADS)

Erdal, F.

2017-06-01

This research addresses the minimum weight design of new-generation steel beams with sinusoidal openings using a metaheuristic search technique, namely the firefly method. The proposed algorithm is also used to compare the optimum design results of sinusoidal web-expanded beams with steel castellated and cellular beams. Optimum design problems of all beams are formulated according to the design limitations stipulated by the Steel Construction Institute. The design methods adopted in these publications are consistent with BS 5950 specifications. The formulation of the design problem considering the above-mentioned limitations turns out to be a discrete programming problem. The design algorithms based on the technique select the optimum universal beam sections, dimensional properties of sinusoidal, hexagonal and circular holes, and the total number of openings along the beam as design variables. Furthermore, this selection is also carried out such that the behavioural limitations are satisfied. Numerical examples are presented, where the suggested algorithm is implemented to achieve the minimum weight design of these beams subjected to loading combinations.

Wing planform geometry effects on large subsonic military transport airplanes. Final technical report March 1976-February 1977

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kulfan, R.M.; Vachal, J.D.

1978-02-01

A Preliminary Design Study of large turbulent flow military transport aircraft has been made. The study airplanes were designed to carry a heavy payload (350,000 lb) for a long range (10,000 nmi). The study tasks included: Wing geometry/cruise speed optimization of a large cantilever wing military transport airplane; Preliminary design and performance evaluation of a strut-braced wing transport airplane; and Structural analyses of large-span cantilever and strut-braced wings of graphite/epoxy sandwich construction (1985 technology). The best cantilever wing planform for minimum takeoff gross weight, and minimum fuel requirements, as determined using statistical weight evaluations, has a high aspect ratio, lowmore » sweep, low thickness/chord ratio, and a cruise Mach number of 0.76. A near optimum wing planform with greater speed capability (M = 0.78) has an aspect ratio = 12, quarter chord sweep = 20 deg, and thickness/chord ratio of 0.14/0.08 (inboard/outboard).« less

The effect of ultradian and orbital cycles on plant growth

NASA Technical Reports Server (NTRS)

Berry, W.; Hoshizaki, T.; Ulrich, A.

1986-01-01

In a series of experiments using sugar beets, researchers investigated the effects of varying cycles lengths on growth (0.37 hr to 48 hr). Each cycle was equally divided into a light and dark period so that each treatment regardless of cycle length received the same amount of light over the 17 weeks of the experiment. Two growth parameters were used to evaluate the effects of cycle length, total fresh weight and sucrose content of the storage root. Both parameters showed very similar responses in that under long cycles (12 hr or greater) growth was normal, whereas plants growing under shorter cycle periods were progressively inhibited. Minimum growth occurred at a cycle period of 0.75 hr. The yield at the 0.75 hr cycle, where was at a minimum, for total fresh weight was only 51 percent compared to the 24 hr cycle. The yield of sucrose was even more reduced at 41 percent of the 24 hr cycle.

Method and system for gas flow mitigation of molecular contamination of optics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Delgado, Gildardo; Johnson, Terry; Arienti, Marco

A computer-implemented method for determining an optimized purge gas flow in a semi-conductor inspection metrology or lithography apparatus, comprising receiving a permissible contaminant mole fraction, a contaminant outgassing flow rate associated with a contaminant, a contaminant mass diffusivity, an outgassing surface length, a pressure, a temperature, a channel height, and a molecular weight of a purge gas, calculating a flow factor based on the permissible contaminant mole fraction, the contaminant outgassing flow rate, the channel height, and the outgassing surface length, comparing the flow factor to a predefined maximum flow factor value, calculating a minimum purge gas velocity and amore » purge gas mass flow rate from the flow factor, the contaminant mass diffusivity, the pressure, the temperature, and the molecular weight of the purge gas, and introducing the purge gas into the semi-conductor inspection metrology or lithography apparatus with the minimum purge gas velocity and the purge gas flow rate.« less

Space shuttle main engine definition (phase B). Volume 5: Valves and interconnects. [for space shuttle

NASA Technical Reports Server (NTRS)

Schultz, D. F.

1971-01-01

The steady state thermodynamic cycle balance of the single preburner staged combustion engine, coupled with dynamic transient analyses, dictated in detail the location and requirements for each valve defined in this volume. Valve configuration selections were influenced by overall engine and vehicle system weight and failure mode determinations. Modulating valve actuators are external to the valve and are line replaceable. Development and satisfactory demonstration of a high pressure dynamic shaft seal has made this configuration practical. Pneumatic motor driven actuators that use engine pumped hydrogen gas as the working fluid are used. The helium control system is proposed as a module containing a cluster of solenoid actuated valves. The separable couplings and flanges are designed to assure minimum leakage with minimum coupling weight. The deflection of the seal surface in the flange is defined by finite element analysis that has been confirmed with test data. The seal design proposed has passed preliminary pressure cycling and thermal cycling tests.

Yield modeling of acoustic charge transport transversal filters

NASA Technical Reports Server (NTRS)

Kenney, J. S.; May, G. S.; Hunt, W. D.

1995-01-01

This paper presents a yield model for acoustic charge transport transversal filters. This model differs from previous IC yield models in that it does not assume that individual failures of the nondestructive sensing taps necessarily cause a device failure. A redundancy in the number of taps included in the design is explained. Poisson statistics are used to describe the tap failures, weighted over a uniform defect density distribution. A representative design example is presented. The minimum number of taps needed to realize the filter is calculated, and tap weights for various numbers of redundant taps are calculated. The critical area for device failure is calculated for each level of redundancy. Yield is predicted for a range of defect densities and redundancies. To verify the model, a Monte Carlo simulation is performed on an equivalent circuit model of the device. The results of the yield model are then compared to the Monte Carlo simulation. Better than 95% agreement was obtained for the Poisson model with redundant taps ranging from 30% to 150% over the minimum.

Comparative efficacy of storage bags, storability and damage potential of bruchid beetle.

PubMed

Harish, G; Nataraja, M V; Ajay, B C; Holajjer, Prasanna; Savaliya, S D; Gedia, M V

2014-12-01

Groundnut during storage is attacked by number of stored grain pests and management of these insect pests particularly bruchid beetle, Caryedon serratus (Oliver) is of prime importance as they directly damage the pod and kernels. In this regard different storage bags that could be used and duration up to which we can store groundnut has been studied. Super grain bag recorded minimum number of eggs laid and less damage and minimum weight loss in pods and kernels in comparison to other storage bags. Analysis of variance for multiple regression models were found to be significant in all bags for variables viz, number of eggs laid, damage in pods and kernels, weight loss in pods and kernels throughout the season. Multiple comparison results showed that there was a high probability of eggs laid and pod damage in lino bag, fertilizer bag and gunny bag, whereas super grain bag was found to be more effective in managing the C. serratus owing to very low air circulation.

Quantization noise in digital speech. M.S. Thesis- Houston Univ.

NASA Technical Reports Server (NTRS)

Schmidt, O. L.

1972-01-01

The amount of quantization noise generated in a digital-to-analog converter is dependent on the number of bits or quantization levels used to digitize the analog signal in the analog-to-digital converter. The minimum number of quantization levels and the minimum sample rate were derived for a digital voice channel. A sample rate of 6000 samples per second and lowpass filters with a 3 db cutoff of 2400 Hz are required for 100 percent sentence intelligibility. Consonant sounds are the first speech components to be degraded by quantization noise. A compression amplifier can be used to increase the weighting of the consonant sound amplitudes in the analog-to-digital converter. An expansion network must be installed at the output of the digital-to-analog converter to restore the original weighting of the consonant sounds. This technique results in 100 percent sentence intelligibility for a sample rate of 5000 samples per second, eight quantization levels, and lowpass filters with a 3 db cutoff of 2000 Hz.

Some notes on the Roman domination number and Italian domination number in graphs

NASA Astrophysics Data System (ADS)

Hajibaba, Maryam; Jafari Rad, Nader

2017-09-01

An Italian dominating function (or simply, IDF) on a graph G = (V, E) is a function f : V → {0, 1, 2} that satisfies the property that for every vertex v ∈ V, with f(v) = 0, Σ u∈N(v) f(u) ≥ 2. The weight of an Italian dominating function f is defined as w(f) = f(V ) = Σ u∈V f(u). The minimum weight among all of the Italian dominating functions on a graph G is called the Italian domination number of G, and is denoted by γI (G). A double Roman dominating function (or simply, DRDF) is a function f : V → {0, 1, 2, 3} having the property that if f(v) = 0 for a vertex v, then v has at least two adjacent vertices assigned 2 under f or one adjacent vertex assigned 3 under f, and if f(v) = 1, then v has at least one neighbor with f(w) ≥ 2. The weight of a DRDF f is defined as the sum f(V) = Σ v∈V f(v), and the minimum weight of a DRDF on G is the double Roman domination number of G, denoted by γdR (G). In this paper we show that γdR (G)/2 ≤ γI (G) ≤ 2γdR (G)/3, and characterize all trees T with γI (T) = 2γdR (T)/3.

Weight optimization of an aerobrake structural concept for a lunar transfer vehicle

NASA Technical Reports Server (NTRS)

Bush, Lance B.; Unal, Resit; Rowell, Lawrence F.; Rehder, John J.

1992-01-01

An aerobrake structural concept for a lunar transfer vehicle was weight optimized through the use of the Taguchi design method, finite element analyses, and element sizing routines. Six design parameters were chosen to represent the aerobrake structural configuration. The design parameters included honeycomb core thickness, diameter-depth ratio, shape, material, number of concentric ring frames, and number of radial frames. Each parameter was assigned three levels. The aerobrake structural configuration with the minimum weight was 44 percent less than the average weight of all the remaining satisfactory experimental configurations. In addition, the results of this study have served to bolster the advocacy of the Taguchi method for aerospace vehicle design. Both reduced analysis time and an optimized design demonstrated the applicability of the Taguchi method to aerospace vehicle design.

Functional Brain Networks: Does the Choice of Dependency Estimator and Binarization Method Matter?

NASA Astrophysics Data System (ADS)

Jalili, Mahdi

2016-07-01

The human brain can be modelled as a complex networked structure with brain regions as individual nodes and their anatomical/functional links as edges. Functional brain networks are constructed by first extracting weighted connectivity matrices, and then binarizing them to minimize the noise level. Different methods have been used to estimate the dependency values between the nodes and to obtain a binary network from a weighted connectivity matrix. In this work we study topological properties of EEG-based functional networks in Alzheimer’s Disease (AD). To estimate the connectivity strength between two time series, we use Pearson correlation, coherence, phase order parameter and synchronization likelihood. In order to binarize the weighted connectivity matrices, we use Minimum Spanning Tree (MST), Minimum Connected Component (MCC), uniform threshold and density-preserving methods. We find that the detected AD-related abnormalities highly depend on the methods used for dependency estimation and binarization. Topological properties of networks constructed using coherence method and MCC binarization show more significant differences between AD and healthy subjects than the other methods. These results might explain contradictory results reported in the literature for network properties specific to AD symptoms. The analysis method should be seriously taken into account in the interpretation of network-based analysis of brain signals.

Cationic flocculants carrying hydrophobic functionalities: applications for solid/liquid separation.

PubMed

Schwarz, S; Jaeger, W; Paulke, B-R; Bratskaya, S; Smolka, N; Bohrisch, J

2007-07-26

The flocculation behaviors of three series of polycations with narrow molecular weight distributions carrying hydrophobic substituents on their backbones [poly(N-vinylbenzyl-N,N,N-trimethylammonium chloride), poly(N-vinylbenzyl-N,N-dimethyl-N-butylammonium chloride), and poly(N-vinylbenzylpyridinium chloride)] were investigated in dispersions of monodisperse polystyrene latexes and kaolin. Apparently, the charge density of the polycations decreases with increasing substituent hydrophobicity and increasing molecular weight of the polyelectrolytes. The necessary amount of flocculant for phase separation in dispersions with high substrate surface charge densities increases with increasing hydrophobicity of the polyelectrolyte. Nevertheless, the introduction of hydrophobic functionalities is beneficial, resulting in a substantial broadening of the range between the minimum and maximum amounts of flocculant necessary for efficient flocculation (flocculation window). An increase in ionic strength supports this effect. When the substrate has a low charge density, the hydrophobic interactions play a much more significant role in the flocculation process. Here, the minimum efficient doses remained the same for all three polyelectrolytes investigated, but the width of the flocculation window increased as the polycation hydrophobicity and the molecular weight increased. The necessary amount of flocculant increased with an increase in particle size at constant solid content of the dispersion, as well as with a decreasing number of particles at a constant particle size.

Construction of type-II QC-LDPC codes with fast encoding based on perfect cyclic difference sets

NASA Astrophysics Data System (ADS)

Li, Ling-xiang; Li, Hai-bing; Li, Ji-bi; Jiang, Hua

2017-09-01

In view of the problems that the encoding complexity of quasi-cyclic low-density parity-check (QC-LDPC) codes is high and the minimum distance is not large enough which leads to the degradation of the error-correction performance, the new irregular type-II QC-LDPC codes based on perfect cyclic difference sets (CDSs) are constructed. The parity check matrices of these type-II QC-LDPC codes consist of the zero matrices with weight of 0, the circulant permutation matrices (CPMs) with weight of 1 and the circulant matrices with weight of 2 (W2CMs). The introduction of W2CMs in parity check matrices makes it possible to achieve the larger minimum distance which can improve the error- correction performance of the codes. The Tanner graphs of these codes have no girth-4, thus they have the excellent decoding convergence characteristics. In addition, because the parity check matrices have the quasi-dual diagonal structure, the fast encoding algorithm can reduce the encoding complexity effectively. Simulation results show that the new type-II QC-LDPC codes can achieve a more excellent error-correction performance and have no error floor phenomenon over the additive white Gaussian noise (AWGN) channel with sum-product algorithm (SPA) iterative decoding.

Blade size and weight effects in shovel design.

PubMed

Freivalds, A; Kim, Y J

1990-03-01

The shovel is a basic tool that has undergone only nominal systematic design changes. Although previous studies found shovel-weight and blade-size effects of shovelling, the exact trade-off between the two has not been quantified. Energy expenditure, heart rate, ratings of perceived exertion and shovelling performance were measured on five subjects using five shovels with varying blade sizes and weights to move sand. Energy expenditure, normalised to subject weight and load handled, varied quadratically with the blade-size/shovel-weight (B/W) ratio. Minimum energy cost was at B/W = 0.0676 m2/kg, which for an average subject and average load would require an acceptable 5.16 kcal/min of energy expenditure. Subjects, through the ratings of perceived exertion, also strongly preferred the lighter shovels without regard to blade size. Too large a blade or too heavy a shovel increased energy expenditure beyond acceptable levels, while too small a blade reduced efficiency of the shovelling.

Baby Sling: Is It Safe?

MedlinePlus

Healthy Lifestyle Infant and toddler health Is it safe to hold a baby in a baby sling? Answers from Jay L. Hoecker, M.D. A baby sling — a one-shouldered baby ... sling's weight minimum before placing your newborn in it. Keep your baby's airways unobstructed. Make sure your ...

14 CFR 23.1563 - Airspeed placards.

Code of Federal Regulations, 2014 CFR

2014-01-01

... multiengine-powered airplanes of more than 6,000 pounds maximum weight, and turbine engine-powered airplanes, the maximum value of the minimum control speed, VMC (one-engine-inoperative) determined under § 23.149... control and the airspeed indicator has features such as low speed awareness that provide ample warning...

14 CFR 23.1563 - Airspeed placards.

Code of Federal Regulations, 2013 CFR

2013-01-01

... multiengine-powered airplanes of more than 6,000 pounds maximum weight, and turbine engine-powered airplanes, the maximum value of the minimum control speed, VMC (one-engine-inoperative) determined under § 23.149... control and the airspeed indicator has features such as low speed awareness that provide ample warning...

Pseudo-Equivalent Groups and Linking

ERIC Educational Resources Information Center

Haberman, Shelby J.

2015-01-01

Adjustment by minimum discriminant information provides an approach to linking test forms in the case of a nonequivalent groups design with no satisfactory common items. This approach employs background information on individual examinees in each administration so that weighted samples of examinees form pseudo-equivalent groups in the sense that…

Statistical Mechanical Analysis of Online Learning with Weight Normalization in Single Layer Perceptron

NASA Astrophysics Data System (ADS)

Yoshida, Yuki; Karakida, Ryo; Okada, Masato; Amari, Shun-ichi

2017-04-01

Weight normalization, a newly proposed optimization method for neural networks by Salimans and Kingma (2016), decomposes the weight vector of a neural network into a radial length and a direction vector, and the decomposed parameters follow their steepest descent update. They reported that learning with the weight normalization achieves better converging speed in several tasks including image recognition and reinforcement learning than learning with the conventional parameterization. However, it remains theoretically uncovered how the weight normalization improves the converging speed. In this study, we applied a statistical mechanical technique to analyze on-line learning in single layer linear and nonlinear perceptrons with weight normalization. By deriving order parameters of the learning dynamics, we confirmed quantitatively that weight normalization realizes fast converging speed by automatically tuning the effective learning rate, regardless of the nonlinearity of the neural network. This property is realized when the initial value of the radial length is near the global minimum; therefore, our theory suggests that it is important to choose the initial value of the radial length appropriately when using weight normalization.

Ridge sowing of sunflower (Helianthus annuus L.) in a minimum till system improves the productivity, oil quality, and profitability on a sandy loam soil under an arid climate.

PubMed

Sher, Ahmad; Suleman, Muhammad; Qayyum, Abdul; Sattar, Abdul; Wasaya, Allah; Ijaz, Muhammad; Nawaz, Ahmad

2018-04-01

Sunflower (Helianthus annuus L.) is a major oilseed crop grown for its edible oil across the globe including Pakistan. In Pakistan, the production of edible oil is less than the required quantity; the situation is being worsened with the increasing population. Thus, there is dire need to grow those sunflower genotypes which perform better under a given set of agronomic practices. In this 2-year study, we compared four sunflower genotypes, viz., Armoni, Kundi, Sinji, and S-278 for their yield potential, oil contents, fatty acid composition, and profitability under three sowing methods, viz., bed sowing, line sowing, and ridge sowing and two tillage system, viz., plow till and minimum till. Among the sunflower genotypes, the genotype Armoni produced the highest plant height, number of leaves, head diameter, 1000-achene weight, and achene yield; the oil contents and oleic acid were the highest in genotype Sinji. Among the sowing methods, the highest number of leaves per plant, head diameter, number of achenes per head, achene yield, and oil contents were recorded in ridge sowing. Among the tillage systems, the highest head diameter 16. 2 cm, 1000-achene weight (57.2 g), achene yield (1.8 t ha -1 ), oil contents (35.2%), and oleic acid (15.2%) were recorded in minimum till sunflower. The highest net benefits and benefit to cost ratio were recorded in minimum till ridge sown Armoni genotype. In conclusion, the genotype Armoni should be grown on ridges to achieve the highest achene yield, oil contents, and net profitability.

Minimum size limits for yellow perch (Perca flavescens) in western Lake Erie

USGS Publications Warehouse

Hartman, Wilbur L.; Nepszy, Stephen J.; Scholl, Russell L.

1980-01-01

During the 1960's yellow perch (Perca flavescens) of Lake Erie supported a commercial fishery that produced an average annual catch of 23 million pounds, as well as a modest sport fishery. Since 1969, the resource has seriously deteriorated. Commercial landings amounted to only 6 million pounds in 1976, and included proportionally more immature perch than in the 1960's. Moreover, no strong year classes were produced between 1965 and 1975. An interagency technical committee was appointed in 1975 by the Lake Erie Committee of the Great Lakes Fishery Commission to develop an interim management strategy that would provide for greater protection of perch in western Lake Erie, where declines have been the most severe. The committee first determined the age structure, growth and mortality rates, maturation schedule, and length-fecundity relationship for the population, and then applied Ricker-type equilibrium yield models to determine the effects of various minimum length limits on yield, production, average stock weight, potential egg deposition, and the Abrosov spawning frequency indicator (average number of spawning opportunities per female). The committee recommended increasing the minimum length limit of 5.0 inches to at least 8.5 inches. Theoretically, this change would increase the average stock weight by 36% and potential egg deposition by 44%, without significantly decreasing yield. Abrosov's spawning frequency indicator would rise from the existing 0.6 to about 1.2.

Thin healthy women have a similar low bone mass to women with anorexia nervosa.

PubMed

Fernández-García, D; Rodríguez, M; García Alemán, J; García-Almeida, J M; Picón, M J; Fernández-Aranda, F; Tinahones, F J

2009-09-01

An association between anorexia nerviosa (AN) and low bone mass has been demonstrated. Bone loss associated with AN involves hormonal and nutritional impairments, though their exact contribution is not clearly established. We compared bone mass in AN patients with women of similar weight with no criteria for AN, and a third group of healthy, normal-weight, age-matched women. The study included forty-eight patients with AN, twenty-two healthy eumenorrhoeic women with low weight (LW group; BMI < 18.5 kg/m2) and twenty healthy women with BMI >18.5 kg/m2 (control group), all of similar age. We measured lean body mass, percentage fat mass, total bone mineral content (BMC) and bone mineral density in lumbar spine (BMD LS) and in total (tBMD). We measured anthropometric parameters, leptin and growth hormone. The control group had greater tBMD and BMD LS than the other groups, with no differences between the AN and LW groups. No differences were found in tBMD, BMD LS and total BMC between the restrictive (n 25) and binge-purge type (n 23) in AN patients. In AN, minimum weight (P = 0.002) and percentage fat mass (P = 0.02) explained BMD LS variation (r2 0.48) and minimum weight (r2 0.42; P = 0.002) for tBMD in stepwise regression analyses. In the LW group, BMI explained BMD LS (r2 0.72; P = 0.01) and tBMD (r2 0.57; P = 0.04). We concluded that patients with AN had similar BMD to healthy thin women. Anthropometric parameters could contribute more significantly than oestrogen deficiency in the achievement of peak bone mass in AN patients.

Outpatient treatment of deep venous thrombosis in diverse inner-city patients.

PubMed

Dunn, A S; Schechter, C; Gotlin, A; Vomvolakis, D; Jacobs, E; Sacks, H S; Coller, B

2001-04-15

We sought to describe the development and outcomes of a hospital-based program designed to provide safe and effective outpatient treatment to a diverse group of patients with acute deep venous thrombosis. Patients enrolled in the program were usually discharged on the day of or the day after presentation. Low- molecular-weight heparin was administered for a minimum of 5 days and warfarin was given for a minimum of 3 months. The hospital provided low-molecular-weight heparin free of charge to patients. Patients received daily home nursing visits to monitor the prothrombin time, assess compliance, and detect complications. The inpatient and outpatient records of the first 89 consecutive patients enrolled in the program were reviewed. Patients were observed for a 3-month period after enrollment. The median length of stay was 1 day. Low-molecular-weight heparin was administered for a mean (+/- standard deviation [SD]) of 4.7 +/- 2.4 days at home. Recurrent thromboembolism was noted in 1 patient (1%), major bleeding in 2 patients (2%), and minor bleeding in 2 patients (2%). No patients died or developed thrombocytopenia. Assuming that patients would have been hospitalized for the duration of treatment with low-molecular-weight heparin, the program eliminated a mean of 4.7 days of hospitalization, with an estimated reduction of $1,645 in total health care costs per patient. This hospital-based program to provide outpatient treatment of deep venous thrombosis to a diverse group of inner-city patients achieved a low incidence of adverse events and substantial health care cost savings. Specific strategies, including providing low-molecular-weight heparin free of charge and daily home nursing visits, can be utilized to facilitate access to outpatient treatment and ensure high-quality care.

Attrition and changes in size distribution of lime sorbents during fluidization in a circulating fluidized bed absorber. Double quarterly report, January 1--August 31, 1993

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lee, Sang-Kwun; Keener, T.C.; Cook, J.L.

1993-12-31

The experimental data of lime sorbent attrition obtained from attriton tests in a circulating fluidized bed absorber (CFBA) are represented. The results are interpreted as both the weight-based attrition rate and size-based attrition rate. The weight-based attrition rate constants are obtained from a modified second-order attrition model, incorporating a minimum fluidization weight, W{sub min}, and excess velocity. Furthermore, this minimum fluidization weight, or W{sub min} was found to be a function of both particle size and velocity. A plot of the natural log of the overall weight-based attrition rate constants (ln K{sub a}) for Lime 1 (903 MMD) at superficialmore » gas velocities of 2 m/s, 2.35 m/s, and 2.69 m/s and for Lime 2 (1764 MMD) at superficial gas velocities of 2 m/s, 3 m/s, 4 m/s and 5 m/s versus the energy term, 1/(U-U{sub mf}){sup 2}, yielded a linear relationship. And, a regression coefficient of 0.9386 for the linear regression confirms that K{sub a} may be expressed in Arrhenius form. In addition, an unsteady state population model is represented to predict the changes in size distribution of bed materials during fluidization. The unsteady state population model was verified experimentally and the solid size distribution predicted by the model agreed well with the corresponding experimental size distributions. The model may be applicable for the batch and continuous operations of fluidized beds in which the solids size reduction is predominantly resulted from attritions and elutriations. Such significance of the mechanical attrition and elutriation is frequently seen in a fast fluidized bed as well as in a circulating fluidized bed.« less

On the Impact of Local Taxes in a Set Cover Game

NASA Astrophysics Data System (ADS)

Escoffier, Bruno; Gourvès, Laurent; Monnot, Jérôme

Given a collection C of weighted subsets of a ground set E, the SET cover problem is to find a minimum weight subset of C which covers all elements of E. We study a strategic game defined upon this classical optimization problem. Every element of E is a player which chooses one set of C where it appears. Following a public tax function, every player is charged a fraction of the weight of the set that it has selected. Our motivation is to design a tax function having the following features: it can be implemented in a distributed manner, existence of an equilibrium is guaranteed and the social cost for these equilibria is minimized.

A Prize-Collecting Steiner Tree Approach for Transduction Network Inference

NASA Astrophysics Data System (ADS)

Bailly-Bechet, Marc; Braunstein, Alfredo; Zecchina, Riccardo

Into the cell, information from the environment is mainly propagated via signaling pathways which form a transduction network. Here we propose a new algorithm to infer transduction networks from heterogeneous data, using both the protein interaction network and expression datasets. We formulate the inference problem as an optimization task, and develop a message-passing, probabilistic and distributed formalism to solve it. We apply our algorithm to the pheromone response in the baker’s yeast S. cerevisiae. We are able to find the backbone of the known structure of the MAPK cascade of pheromone response, validating our algorithm. More importantly, we make biological predictions about some proteins whose role could be at the interface between pheromone response and other cellular functions.

Biological Activity Predictions and Hydrogen Bonding Analysis in Quinolines

NASA Astrophysics Data System (ADS)

Gupta, Palvi; Kamni

The paper has been designed to make a comprehensive review of a particular series of organic molecular assembly in the form of compendium. An overview of general description of fifteen quinoline derivatives has been given. The biological activity spectra of quinoline derivatives have been correlated on structure activity relationships base which provides the different Pa (possibility of activity) and Pi (possibility of inactivity) values. Expositions of the role of intermolecular interactions in the identified derivatives have been discussed with the standard distance and angle cut-off criteria criteria as proposed by Desiraju and Steiner (1999) in an International monogram on crystallography. Distance-angle scatter plots for intermolecular interactions are presented for a better understanding of the packing interactions which exist in quinoline derivatives.