Code of Federal Regulations, 2010 CFR
2010-10-01
...) For each fiscal year covered by the plan, the Tribe's proposed minimum number of hours per week that... the hours of work participation, it must so indicate in its TFAP along with a definition of... the purposes of TANF; (3) The work activities that count towards these work requirements; (4) Any...
26 CFR 1.6664-4 - Reasonable cause and good faith exception to section 6662 penalties.
Code of Federal Regulations, 2011 CFR
2011-04-01
... claimed. Example 3. E, an individual, worked for Company X doing odd jobs and filling in for other... legal justification. (3) Minimum requirements not dispositive. Satisfaction of the minimum requirements... example, depending on the circumstances, satisfaction of the minimum requirements may not be dispositive...
29 CFR 780.620 - Minimum wage for livestock auction work.
Code of Federal Regulations, 2010 CFR
2010-07-01
... minimum rate required by section 6(a)(1) of the Act for the time spent in livestock auction work. The exemption does not apply unless there is payment for all hours spent in livestock auction work at not less... 29 Labor 3 2010-07-01 2010-07-01 false Minimum wage for livestock auction work. 780.620 Section...
30 CFR 77.805 - Cable couplers and connection boxes; minimum design requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Cable couplers and connection boxes; minimum... WORK AREAS OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.805 Cable couplers and connection boxes; minimum design requirements. (a)(1) Couplers that are used in medium- or high-voltage power...
30 CFR 77.805 - Cable couplers and connection boxes; minimum design requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Cable couplers and connection boxes; minimum... WORK AREAS OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.805 Cable couplers and connection boxes; minimum design requirements. (a)(1) Couplers that are used in medium- or high-voltage power...
30 CFR 77.805 - Cable couplers and connection boxes; minimum design requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Cable couplers and connection boxes; minimum... WORK AREAS OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.805 Cable couplers and connection boxes; minimum design requirements. (a)(1) Couplers that are used in medium- or high-voltage power...
29 CFR 780.313 - Piece rate basis.
Code of Federal Regulations, 2010 CFR
2010-07-01
... That Is Exempted From the Minimum Wage and Overtime Pay Requirements Under Section 13(a)(6) Statutory... to the minimum wage provisions of the Act does not meet all the requirements set forth in this section he must be paid at least the minimum wage for each hour worked in a particular workweek...
31 CFR 356.31 - How does the STRIPS program work?
Code of Federal Regulations, 2014 CFR
2014-07-01
... 31 Money and Finance: Treasury 2 2014-07-01 2014-07-01 false How does the STRIPS program work? 356... than Treasury inflation-protected securities or Treasury floating rate notes)—(1) Minimum par amounts required for STRIPS. The minimum par amount of a non-indexed security that may be stripped is $100. Any par...
Research protocols in National Park Service wilderness
Jim Walters
2000-01-01
While the National Park Service encourages the use of its wilderness resource for research, management policies require that all research apply âminimum requirementâ protocols to determine: 1) if the research is needed to support the purposes of wilderness and, 2) if it is appropriate, determine the minimum tool needed to accomplish the work.
Code of Federal Regulations, 2013 CFR
2013-04-01
..., Development and Technology Transfer Program Management § 420.207 What are the requirements for research, development, and technology transfer work programs? (a) The State DOT's RD&T work program must, as a minimum... 23 Highways 1 2013-04-01 2013-04-01 false What are the requirements for research, development, and...
Code of Federal Regulations, 2010 CFR
2010-04-01
..., Development and Technology Transfer Program Management § 420.207 What are the requirements for research, development, and technology transfer work programs? (a) The State DOT's RD&T work program must, as a minimum... 23 Highways 1 2010-04-01 2010-04-01 false What are the requirements for research, development, and...
Code of Federal Regulations, 2014 CFR
2014-04-01
..., Development and Technology Transfer Program Management § 420.207 What are the requirements for research, development, and technology transfer work programs? (a) The State DOT's RD&T work program must, as a minimum... 23 Highways 1 2014-04-01 2014-04-01 false What are the requirements for research, development, and...
Code of Federal Regulations, 2012 CFR
2012-04-01
..., Development and Technology Transfer Program Management § 420.207 What are the requirements for research, development, and technology transfer work programs? (a) The State DOT's RD&T work program must, as a minimum... 23 Highways 1 2012-04-01 2012-04-01 false What are the requirements for research, development, and...
Code of Federal Regulations, 2011 CFR
2011-04-01
..., Development and Technology Transfer Program Management § 420.207 What are the requirements for research, development, and technology transfer work programs? (a) The State DOT's RD&T work program must, as a minimum... 23 Highways 1 2011-04-01 2011-04-01 false What are the requirements for research, development, and...
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Electric equipment and circuits; overload and short circuit protection; minimum requirements. 77.506-1 Section 77.506-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS O...
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Electric equipment and circuits; overload and short circuit protection; minimum requirements. 77.506-1 Section 77.506-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS O...
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Electric equipment and circuits; overload and short circuit protection; minimum requirements. 77.506-1 Section 77.506-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS O...
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Electric equipment and circuits; overload and short circuit protection; minimum requirements. 77.506-1 Section 77.506-1 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS O...
Guidelines for a Training Program for Audiometric Technicians. Report of Working Group 66.
ERIC Educational Resources Information Center
Glorig, Aram, Ed.; And Others
The document outlines a course designed to train audiometric technicians who will conduct pure-tone conduction tests as part of a program on hearing conservation in noise. A minimum of two days is required for the completion of the course. The outline of the training program presents nine topics with an indication of the minimum time required for…
Minimum visual requirements in different occupations in Finland.
Aine, E
1984-01-01
In Finland the employers can individually fix the minimum visual requirements for their personnel in almost every occupation. In transportation, in police and national defence proper eyesight is regarded so important that strict visual requirements for these have been fixed by the Government. The regulations are often more close when accepting the person to the occupation than later on when working. The minimum requirements are mostly stated for visual acuity, colour perception and visual fields. In some occupations the regulations concern also the refractive error of the eyes and possible eye diseases. In aviation the regulations have been stated by the International Civil Aviation Organization ( ICAO ). The minimum visual requirements for a driving license in highway traffic are classed according to the types of motor vehicles. In railways , maritime commerce and national defence the task of the worker determines the specified regulations. The policeman must have a distant visual acuity of 0.5 without eyeglasses in both eyes and nearly normal colour perception when starting the training course.
29 CFR 785.5 - General requirements of sections 6 and 7 of the Fair Labor Standards Act.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 29 Labor 3 2010-07-01 2010-07-01 false General requirements of sections 6 and 7 of the Fair Labor... WORKED Principles for Determination of Hours Worked § 785.5 General requirements of sections 6 and 7 of the Fair Labor Standards Act. Section 6 requires the payment of a minimum wage by an employer to his...
Recommendations for UAS Crew Ratings. Pilot Ratings and Authorization Requirements for UAS
NASA Technical Reports Server (NTRS)
2005-01-01
This position paper is intended to recommend the minimum certificate and rating requirements for a pilot to operate an Unmanned Aircraft System (UAS) in the National Airspace System. The paper will recommend the minimum requirements based on the Knowledge, Skills, and Abilities (KSA) required of a UAS pilot and show how those compare to the KSAs required by regulation for manned-aircraft pilots. The paper will provide substantiation based on studies conducted using analyses, simulation and flight experience. The paper is not yet complete; only initial working material is included. The material provided describes the body of work completed thus far and the plan for remaining tasks to complete the recommendation. The HSI Pilot KSA document provides an analysis of the knowledge, skills, and abilities required for UAS operation in the NAS. It is the source document used for the position paper.
34 CFR 668.10 - Direct assessment programs.
Code of Federal Regulations, 2013 CFR
2013-07-01
... student will do (e.g., required readings, research, and work products), how the student's work will be... including, if applicable, minimum program length and qualitative factors. (d) Notwithstanding paragraphs (a...
34 CFR 668.10 - Direct assessment programs.
Code of Federal Regulations, 2012 CFR
2012-07-01
... student will do (e.g., required readings, research, and work products), how the student's work will be... including, if applicable, minimum program length and qualitative factors. (d) Notwithstanding paragraphs (a...
34 CFR 668.10 - Direct assessment programs.
Code of Federal Regulations, 2014 CFR
2014-07-01
... student will do (e.g., required readings, research, and work products), how the student's work will be... including, if applicable, minimum program length and qualitative factors. (d) Notwithstanding paragraphs (a...
Farzandipour, Mehrdad; Meidani, Zahra; Riazi, Hossein; Sadeqi Jabali, Monireh
2016-12-01
Considering the integral role of understanding users' requirements in information system success, this research aimed to determine functional requirements of nursing information systems through a national survey. Delphi technique method was applied to conduct this study through three phases: focus group method modified Delphi technique and classic Delphi technique. A cross-sectional study was conducted to evaluate the proposed requirements within 15 general hospitals in Iran. Forty-three of 76 approved requirements were clinical, and 33 were administrative ones. Nurses' mean agreements for clinical requirements were higher than those of administrative requirements; minimum and maximum means of clinical requirements were 3.3 and 3.88, respectively. Minimum and maximum means of administrative requirements were 3.1 and 3.47, respectively. Research findings indicated that those information system requirements that support nurses in doing tasks including direct care, medicine prescription, patient treatment management, and patient safety have been the target of special attention. As nurses' requirements deal directly with patient outcome and patient safety, nursing information systems requirements should not only address automation but also nurses' tasks and work processes based on work analysis.
Soliman, Ahmed M; Eldosoky, Mohamed A; Taha, Taha E
2017-03-29
The separation of blood components (WBCs, RBCs, and platelets) is important for medical applications. Recently, standing surface acoustic wave (SSAW) microfluidic devices are used for the separation of particles. In this paper, the design analysis of SSAW microfluidics is presented. Also, the analysis of SSAW force with Rayleigh angle effect and its attenuation in liquid-loaded substrate, viscous drag force, hydrodynamic force, and diffusion force are explained and analyzed. The analyses are provided for selecting the piezoelectric material, width of the main microchannel, working area of SAW, wavelength, minimum input power required for the separation process, and widths of outlet collecting microchannels. The design analysis of SSAW microfluidics is provided for determining the minimum input power required for the separation process with appropriated the displacement contrast of the particles.The analyses are applied for simulation the separation of blood components. The piezoelectric material, width of the main microchannel, working area of SAW, wavelength, and minimum input power required for the separation process are selected as LiNbO₃, 120 μm, 1.08 mm², 300 μm, 371 mW. The results are compared to other published results. The results of these simulations achieve minimum power consumption, less complicated setup, and high collecting efficiency. All simulation programs are built by MATLAB.
Soliman, Ahmed M.; Eldosoky, Mohamed A.; Taha, Taha E.
2017-01-01
The separation of blood components (WBCs, RBCs, and platelets) is important for medical applications. Recently, standing surface acoustic wave (SSAW) microfluidic devices are used for the separation of particles. In this paper, the design analysis of SSAW microfluidics is presented. Also, the analysis of SSAW force with Rayleigh angle effect and its attenuation in liquid-loaded substrate, viscous drag force, hydrodynamic force, and diffusion force are explained and analyzed. The analyses are provided for selecting the piezoelectric material, width of the main microchannel, working area of SAW, wavelength, minimum input power required for the separation process, and widths of outlet collecting microchannels. The design analysis of SSAW microfluidics is provided for determining the minimum input power required for the separation process with appropriated the displacement contrast of the particles.The analyses are applied for simulation the separation of blood components. The piezoelectric material, width of the main microchannel, working area of SAW, wavelength, and minimum input power required for the separation process are selected as LiNbO3, 120 μm, 1.08 mm2, 300 μm, 371 mW. The results are compared to other published results. The results of these simulations achieve minimum power consumption, less complicated setup, and high collecting efficiency. All simulation programs are built by MATLAB. PMID:28952506
Federal Register 2010, 2011, 2012, 2013, 2014
2013-02-06
... Collection for Work Application/ Job Order Recordkeeping, Extension Without Revisions AGENCY: Employment and... extension without changes of the data retention required by 20 CFR 652.8(d)(5) of the Wagner-Peyser Act, which requires each state to retain applications and job orders for a minimum of one year. The current...
46 CFR 162.028-3 - Requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... which are subjected to pressure, exclusive of the hose, shall be at least five times the maximum working... which will withstand a minimum bursting pressure of 6,000 p.s.i., and a discharge hose or tube which will withstand a minimum bursting pressure of 5,000 p.s.i. The hose shall be constructed with either a...
46 CFR 162.028-3 - Requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... which are subjected to pressure, exclusive of the hose, shall be at least five times the maximum working... which will withstand a minimum bursting pressure of 6,000 p.s.i., and a discharge hose or tube which will withstand a minimum bursting pressure of 5,000 p.s.i. The hose shall be constructed with either a...
46 CFR 162.028-3 - Requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... which are subjected to pressure, exclusive of the hose, shall be at least five times the maximum working... which will withstand a minimum bursting pressure of 6,000 p.s.i., and a discharge hose or tube which will withstand a minimum bursting pressure of 5,000 p.s.i. The hose shall be constructed with either a...
Code of Federal Regulations, 2011 CFR
2011-10-01
... include in its Tribal Family Assistance Plan? (a) To assess a Tribe's level of success in meeting its TANF... “reasonable” for purposes of this subsection, along with: (A) An explanation of how the economic conditions... proposed work requirements are consistent with the purposes of TANF and with the economic conditions and...
Code of Federal Regulations, 2010 CFR
2010-07-01
... RETRAINING OF MINERS Training and Retraining of Miners Working at Surface Mines and Surface Areas of... shall not be required for miners who have been trained and who have demonstrated safe operating... required for miners who have performed the new work tasks and who have demonstrated safe operating...
Ahdab, Yvana D.; Thiel, Gregory P.; Böhlke, John Karl; Stanton, Jennifer S.; Lienhard, John H.
2018-01-01
This paper uses chemical and physical data from a large 2017 U.S. Geological Surveygroundwater dataset with wells in the U.S. and three smaller international groundwater datasets with wells primarily in Australia and Spain to carry out a comprehensive investigation of brackish groundwater composition in relation to minimum desalinationenergy costs. First, we compute the site-specific least work required for groundwater desalination. Least work of separation represents a baseline for specific energy consumptionof desalination systems. We develop simplified equations based on the U.S. data for least work as a function of water recovery ratio and a proxy variable for composition, either total dissolved solids, specific conductance, molality or ionic strength. We show that the U.S. correlations for total dissolved solids and molality may be applied to the international datasets. We find that total molality can be used to calculate the least work of dilute solutions with very high accuracy. Then, we examine the effects of groundwater solute composition on minimum energy requirements, showing that separation requirements increase from calcium to sodium for cations and from sulfate to bicarbonate to chloride for anions, for any given TDS concentration. We study the geographic distribution of least work, total dissolved solids, and major ions concentration across the U.S. We determine areas with both low least work and high water stress in order to highlight regions holding potential for desalination to decrease the disparity between high water demand and low water supply. Finally, we discuss the implications of the USGS results on water resource planning, by comparing least work to the specific energy consumption of brackish water reverse osmosisplants and showing the scaling propensity of major electrolytes and silica in the U.S. groundwater samples.
Code of Federal Regulations, 2010 CFR
2010-07-01
...) Provide for the employment under certificates of individuals with disabilities at special minimum wage... employed in the vicinity for essentially the same type, quality, and quantity of work; (b) Require... to be performed employed in the locality for essentially the same type of work; (c) Prohibit...
75 FR 71368 - Erik Erb; Notice of Receipt of Petition for Rulemaking
Federal Register 2010, 2011, 2012, 2013, 2014
2010-11-23
... requirement for security officers working 12-hour shifts from an average of 3 days per week to 2.5 or 2 days... the minimum days off (MDO) requirement for security officers working 12- hour shifts from an average of 3 days per week to 2.5 or 2 days per week. The NRC is also requesting public comments on the PRM...
Minimum energy dissipation required for a logically irreversible operation
NASA Astrophysics Data System (ADS)
Takeuchi, Naoki; Yoshikawa, Nobuyuki
2018-01-01
According to Landauer's principle, the minimum heat emission required for computing is linked to logical entropy, or logical reversibility. The validity of Landauer's principle has been investigated for several decades and was finally demonstrated in recent experiments by showing that the minimum heat emission is associated with the reduction in logical entropy during a logically irreversible operation. Although the relationship between minimum heat emission and logical reversibility is being revealed, it is not clear how much free energy is required to be dissipated for a logically irreversible operation. In the present study, in order to reveal the connection between logical reversibility and free energy dissipation, we numerically demonstrated logically irreversible protocols using adiabatic superconductor logic. The calculation results of work during the protocol showed that, while the minimum heat emission conforms to Landauer's principle, the free energy dissipation can be arbitrarily reduced by performing the protocol quasistatically. The above results show that logical reversibility is not associated with thermodynamic reversibility, and that heat is not only emitted from logic devices but also absorbed by logic devices. We also formulated the heat emission from adiabatic superconductor logic during a logically irreversible operation at a finite operation speed.
29 CFR 1918.92 - Illumination.
Code of Federal Regulations, 2011 CFR
2011-07-01
... operations, illumination for cargo transfer operations shall be of a minimum light intensity of five foot-candles (54 lux). Where work tasks require more light to be performed safely, supplemental lighting shall... surface, in the plane in which the task/working surface is present. (c) Arrangement of lights. Lights...
2 CFR Appendix A to Part 215 - Contract Provisions
Code of Federal Regulations, 2012 CFR
2012-01-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
34 CFR Appendix A to Part 74 - Contract Provisions
Code of Federal Regulations, 2014 CFR
2014-07-01
... shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
7 CFR Appendix A to Part 3019 - Contract Provisions
Code of Federal Regulations, 2013 CFR
2013-01-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
36 CFR Appendix A to Part 1210 - Contract Provisions
Code of Federal Regulations, 2012 CFR
2012-07-01
... shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
36 CFR Appendix A to Part 1210 - Contract Provisions
Code of Federal Regulations, 2014 CFR
2014-07-01
... shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
34 CFR Appendix A to Part 74 - Contract Provisions
Code of Federal Regulations, 2013 CFR
2013-07-01
... shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
34 CFR Appendix A to Part 74 - Contract Provisions
Code of Federal Regulations, 2012 CFR
2012-07-01
... shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
7 CFR Appendix A to Part 3019 - Contract Provisions
Code of Federal Regulations, 2014 CFR
2014-01-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
2 CFR Appendix A to Part 215 - Contract Provisions
Code of Federal Regulations, 2013 CFR
2013-01-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
7 CFR Appendix A to Part 3019 - Contract Provisions
Code of Federal Regulations, 2012 CFR
2012-01-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
Sink fast and swim harder! Round-trip cost-of-transport for buoyant divers.
Miller, Patrick J O; Biuw, Martin; Watanabe, Yuuki Y; Thompson, Dave; Fedak, Mike A
2012-10-15
Efficient locomotion between prey resources at depth and oxygen at the surface is crucial for breath-hold divers to maximize time spent in the foraging layer, and thereby net energy intake rates. The body density of divers, which changes with body condition, determines the apparent weight (buoyancy) of divers, which may affect round-trip cost-of-transport (COT) between the surface and depth. We evaluated alternative predictions from external-work and actuator-disc theory of how non-neutral buoyancy affects round-trip COT to depth, and the minimum COT speed for steady-state vertical transit. Not surprisingly, the models predict that one-way COT decreases (increases) when buoyancy aids (hinders) one-way transit. At extreme deviations from neutral buoyancy, gliding at terminal velocity is the minimum COT strategy in the direction aided by buoyancy. In the transit direction hindered by buoyancy, the external-work model predicted that minimum COT speeds would not change at greater deviations from neutral buoyancy, but minimum COT speeds were predicted to increase under the actuator disc model. As previously documented for grey seals, we found that vertical transit rates of 36 elephant seals increased in both directions as body density deviated from neutral buoyancy, indicating that actuator disc theory may more closely predict the power requirements of divers affected by gravity than an external work model. For both models, minor deviations from neutral buoyancy did not affect minimum COT speed or round-trip COT itself. However, at body-density extremes, both models predict that savings in the aided direction do not fully offset the increased COT imposed by the greater thrusting required in the hindered direction.
Working group on the “adequate minimum” V=volcanic observatory
Tilling, R.I.
1982-01-01
A working group consisting of R. I. Tilling (United States, Chairman), M. Espendola (Mexico), E. Malavassi (Costa Rica), L. Villari (Italy), and J.P Viode (France) met on the island of Guadeloupe on February 20, 1981, to discuss informally the requirements for a "Minimum" volcano observatory, one which would have the essential monitoring equipment and staff to provide reliable information on the state of an active volcno. Given the premise that any monitoring of a volcano is better than none at all, the owrking group then proceeded to consider the concept of an "adequate minimum" observatory.
20 CFR 229.85 - Substantial gainful activity by blind employee or child.
Code of Federal Regulations, 2010 CFR
2010-04-01
... THE RAILROAD RETIREMENT ACT SOCIAL SECURITY OVERALL MINIMUM GUARANTEE Miscellaneous Deductions and... substantial gainful activity that does not require skills or ability used in his or her previous work. However... in any type of substantial gainful activity which requires skills or abilities comparable to those of...
7 CFR 1710.205 - Minimum approval requirements for all load forecasts.
Code of Federal Regulations, 2013 CFR
2013-01-01
... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...
7 CFR 1710.205 - Minimum approval requirements for all load forecasts.
Code of Federal Regulations, 2011 CFR
2011-01-01
... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...
7 CFR 1710.205 - Minimum approval requirements for all load forecasts.
Code of Federal Regulations, 2012 CFR
2012-01-01
... electronically to RUS computer software applications. RUS will evaluate borrower load forecasts for readability...'s engineering planning documents, such as the construction work plan, incorporate consumer and usage...
42 CFR 1007.15 - Applications, certification and recertification.
Code of Federal Regulations, 2010 CFR
2010-10-01
..., or other document sets forth the formal procedures required under § 1007.7(b), or the formal working..., and experience of all senior professional staff already employed and job descriptions, with minimum...
18 CFR 708.4 - Required programs and reports.
Code of Federal Regulations, 2011 CFR
2011-04-01
... part of the Master Plan—Plan of Study. The work plan shall satisfy minimum standards described in this... related to implementation of the Master Plan. These recommendations shall be based on evaluation of...
41 CFR Appendix A to Part 105 - 72-Contract Provisions
Code of Federal Regulations, 2013 CFR
2013-07-01
... required to pay wages to laborers and mechanics at a rate not less than the minimum wages specified in a... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
49 CFR Appendix A to Part 19 - Contract Provisions
Code of Federal Regulations, 2013 CFR
2013-10-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
41 CFR Appendix A to Part 105 - 72-Contract Provisions
Code of Federal Regulations, 2012 CFR
2012-01-01
... required to pay wages to laborers and mechanics at a rate not less than the minimum wages specified in a... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
10 CFR Appendix A to Subpart B of... - Contract Provisions
Code of Federal Regulations, 2012 CFR
2012-01-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
10 CFR Appendix A to Subpart B of... - Contract Provisions
Code of Federal Regulations, 2013 CFR
2013-01-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
41 CFR Appendix A to Part 105 - 72-Contract Provisions
Code of Federal Regulations, 2014 CFR
2014-01-01
... required to pay wages to laborers and mechanics at a rate not less than the minimum wages specified in a... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
49 CFR Appendix A to Part 19 - Contract Provisions
Code of Federal Regulations, 2012 CFR
2012-10-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
49 CFR Appendix A to Part 19 - Contract Provisions
Code of Federal Regulations, 2014 CFR
2014-10-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
22 CFR Appendix A to Part 518 - Contract Provisions
Code of Federal Regulations, 2014 CFR
2014-04-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2,500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
10 CFR Appendix A to Subpart B of... - Contract Provisions
Code of Federal Regulations, 2014 CFR
2014-01-01
..., contractors shall be required to pay wages to laborers and mechanics at a rate not less than the minimum wages... construction contracts and in excess of $2500 for other contracts that involve the employment of mechanics or... mechanic and laborer on the basis of a standard work week of 40 hours. Work in excess of the standard work...
45 CFR 2519.120 - What is the Federal Work-Study requirement?
Code of Federal Regulations, 2010 CFR
2010-10-01
... NATIONAL AND COMMUNITY SERVICE HIGHER EDUCATION INNOVATIVE PROGRAMS FOR COMMUNITY SERVICE Purpose and... under this part, an institution of higher education must demonstrate that it meets the minimum requirements under section 443(b)(2)(A) of the Higher Education Act of 1965 (42 U.S.C. 2753(b)(2)(A)) relating...
5 CFR 630.206 - Minimum charge.
Code of Federal Regulations, 2010 CFR
2010-01-01
... reason, may excuse him without charge to leave. (b) When an employee is charged with leave for an unauthorized absence or tardiness, the agency may not require him to perform work for any part of the leave...
42 CFR 84.144 - Hand-operated blower test; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... shall not exceed one-fiftieth horsepower, and the torque shall not exceed a force of 2.3 kg. (5 pounds... period without failure or indication of excessive wear of bearings or other working parts. ...
42 CFR 84.144 - Hand-operated blower test; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... shall not exceed one-fiftieth horsepower, and the torque shall not exceed a force of 2.3 kg. (5 pounds... period without failure or indication of excessive wear of bearings or other working parts. ...
42 CFR 84.144 - Hand-operated blower test; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... shall not exceed one-fiftieth horsepower, and the torque shall not exceed a force of 2.3 kg. (5 pounds... period without failure or indication of excessive wear of bearings or other working parts. ...
42 CFR 84.144 - Hand-operated blower test; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... shall not exceed one-fiftieth horsepower, and the torque shall not exceed a force of 2.3 kg. (5 pounds... period without failure or indication of excessive wear of bearings or other working parts. ...
42 CFR 84.144 - Hand-operated blower test; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... shall not exceed one-fiftieth horsepower, and the torque shall not exceed a force of 2.3 kg. (5 pounds... period without failure or indication of excessive wear of bearings or other working parts. ...
29 CFR 778.115 - Employees working at two or more rates.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Overtime Pay Requirements Principles for Computing Overtime Pay Based on the âregular Rateâ § 778.115... different types of work for which different nonovertime rates of pay (of not less than the applicable minimum wage) have been established, his regular rate for that week is the weighted average of such rates...
29 CFR 778.417 - General requirements of section 7(g).
Code of Federal Regulations, 2010 CFR
2010-07-01
... Exceptions From the Regular Rate Principles Computing Overtime Pay on the Rate Applicable to the Type of Work... overtime pay permitted in this section will not in any circumstances be seized upon as a device for avoiding payment of the minimum wage due for each hour, the requirement must be met that employee's average...
29 CFR 778.417 - General requirements of section 7(g).
Code of Federal Regulations, 2011 CFR
2011-07-01
... Exceptions From the Regular Rate Principles Computing Overtime Pay on the Rate Applicable to the Type of Work... overtime pay permitted in this section will not in any circumstances be seized upon as a device for avoiding payment of the minimum wage due for each hour, the requirement must be met that employee's average...
[Storage of plant protection products in farms: minimum safety requirements].
Dutto, Moreno; Alfonzo, Santo; Rubbiani, Maristella
2012-01-01
Failure to comply with requirements for proper storage and use of pesticides in farms can be extremely hazardous and the risk of accidents involving farm workers, other persons and even animals is high. There are still wide differences in the interpretation of the concept of "securing or making safe", by workers in this sector. One of the critical points detected, particularly in the fruit sector, is the establishment of an adequate storage site for plant protection products. The definition of "safe storage of pesticides" is still unclear despite the recent enactment of Legislative Decree 81/2008 regulating health and work safety in Italy. In addition, there are no national guidelines setting clear minimum criteria for storage of plant protection products in farms. The authors, on the basis of their professional experience and through analysis of recent legislation, establish certain minimum safety standards for storage of pesticides in farms.
Cold weather paving requirements for bituminous concrete.
DOT National Transportation Integrated Search
1973-01-01
Cold weather paving specifications were developed from work by Corlew and Dickson, who used a computer solution to predict the cooling rate of bituminous concrete. Virginia had used a minimum atmospheric temperature as a criterion; however, it was ev...
Bifacial PV cell with reflector for stand-alone mast for sensor powering purposes
NASA Astrophysics Data System (ADS)
Jakobsen, Michael L.; Thorsteinsson, Sune; Poulsen, Peter B.; Riedel, N.; Rødder, Peter M.; Rødder, Kristin
2017-09-01
Reflectors to bifacial PV-cells are simulated and prototyped in this work. The aim is to optimize the reflector to specific latitudes, and particularly northern latitudes. Specifically, by using minimum semiconductor area the reflector must be able to deliver the electrical power required at the condition of minimum solar travel above the horizon, worst weather condition etc. We will test a bifacial PV-module with a retroreflector, and compare the output with simulations combined with local solar data.
Irwin, P; Rudd, A
1998-01-01
The emphasis on outcomes measurement requires that casemix is considered in any comparative studies. In 1996 the Intercollegiate Working Party for Stroke agreed a minimum data set to measure the severity of casemix in stroke. The reasons for its development, the evidence base supporting the items included and the possible uses of the data set are described. It is currently being evaluated in national outcome and process audits to be reported at a later date.
Sample size of the reference sample in a case-augmented study.
Ghosh, Palash; Dewanji, Anup
2017-05-01
The case-augmented study, in which a case sample is augmented with a reference (random) sample from the source population with only covariates information known, is becoming popular in different areas of applied science such as pharmacovigilance, ecology, and econometrics. In general, the case sample is available from some source (for example, hospital database, case registry, etc.); however, the reference sample is required to be drawn from the corresponding source population. The required minimum size of the reference sample is an important issue in this regard. In this work, we address the minimum sample size calculation and discuss related issues. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.
43 CFR 5451.1 - Minimum performance bond requirements; types.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 43 Public Lands: Interior 2 2011-10-01 2011-10-01 false Minimum performance bond requirements... § 5451.1 Minimum performance bond requirements; types. (a) A minimum performance bond of not less than 20... minimum bond as provided in § 5451.2 of this title. A minimum performance bond of not less than $500 will...
29 CFR 779.311 - Employees working in more than one establishment of same employer.
Code of Federal Regulations, 2010 CFR
2010-07-01
... employer. 779.311 Section 779.311 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION... establishment under section 13(a)(2) or (4) is exempt from the minimum wage and overtime requirements of the Act... hand, it may be stated as a general rule that if such an employer employs an employee in the work of...
ERIC Educational Resources Information Center
General Accounting Office, Washington, DC. Div. of Human Resources.
The Office of United States Senator Daniel Inouye requested information on state minimum licensing and certification requirements for physicians, psychiatrists, psychologists, social workers, and nurses who work directly with patients in state mental hospitals. To obtain this information, the General Accounting Office called the offices of the…
Effect of water on hydrogen permeability
NASA Technical Reports Server (NTRS)
Hulligan, David; Tomazic, William A.
1987-01-01
Doping of hydrogen with CO and CO2 was developed to reduce hydrogen permeation in Stirling engines by forming a low permeability oxide coating on the inner surface of the heater head tubes. Although doping worked well, under certain circumstances the protective oxide could be chemically reduced by the hydrogen in the engine. Some oxygen is required in the hydrogen to prevent reduction. Eventually, all the oxygen in the hydrogen gas - whatever its source - shows up as water. This is the result of hydrogen reducing the CO, CO2, or the protective inner surface oxides. This water can condense in the engine system under the right conditions. If the concentration of water vapor is reduced to a low enough level, the hydrogen can chemically reduce the oxide coating, resulting in an increase in permeability. This work was done to define the minimum water content required to avoid this reduction in the oxide coating. The results of this testing show that a minimum of approximately 750 ppm water is required to prevent an increase in permeability of CG-27, a high temperature metal alloy selected for Stirling engine heater tubes.
12 CFR 3.10 - Minimum capital requirements.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 12 Banks and Banking 1 2014-01-01 2014-01-01 false Minimum capital requirements. 3.10 Section 3.10 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY CAPITAL ADEQUACY STANDARDS Capital Ratio Requirements and Buffers § 3.10 Minimum capital requirements. (a) Minimum capital...
Code of Federal Regulations, 2014 CFR
2014-10-01
... proposal include, but are not limited to: poverty, unemployment, jobless and job surplus rates; education... following: (1) For each fiscal year covered by the plan, the Tribe's proposed participation rate(s) for all...
Code of Federal Regulations, 2013 CFR
2013-10-01
... proposal include, but are not limited to: poverty, unemployment, jobless and job surplus rates; education... following: (1) For each fiscal year covered by the plan, the Tribe's proposed participation rate(s) for all...
Code of Federal Regulations, 2012 CFR
2012-10-01
... proposal include, but are not limited to: poverty, unemployment, jobless and job surplus rates; education... following: (1) For each fiscal year covered by the plan, the Tribe's proposed participation rate(s) for all...
46 CFR 310.55 - Scholastic requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... science; (B) Foreign language; (C) Economics; and, (D) Social science. (2) Evidence of academic work..., Social Sciences and Natural Sciences. Minimum qualifying scores on the entrance examinations will be... given to satisfactory college level study or any special study undertaken to strengthen their academic...
46 CFR 310.55 - Scholastic requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... science; (B) Foreign language; (C) Economics; and, (D) Social science. (2) Evidence of academic work..., Social Sciences and Natural Sciences. Minimum qualifying scores on the entrance examinations will be... given to satisfactory college level study or any special study undertaken to strengthen their academic...
46 CFR 310.55 - Scholastic requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... science; (B) Foreign language; (C) Economics; and, (D) Social science. (2) Evidence of academic work..., Social Sciences and Natural Sciences. Minimum qualifying scores on the entrance examinations will be... given to satisfactory college level study or any special study undertaken to strengthen their academic...
46 CFR 310.55 - Scholastic requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... science; (B) Foreign language; (C) Economics; and, (D) Social science. (2) Evidence of academic work..., Social Sciences and Natural Sciences. Minimum qualifying scores on the entrance examinations will be... given to satisfactory college level study or any special study undertaken to strengthen their academic...
45 CFR 263.1 - How much State money must a State expend annually to meet the basic MOE requirement?
Code of Federal Regulations, 2010 CFR
2010-10-01
... 45 Public Welfare 2 2010-10-01 2010-10-01 false How much State money must a State expend annually... State's Maintenance of Effort? § 263.1 How much State money must a State expend annually to meet the... historic State expenditures. (2) However, if a State meets the minimum work participation rate requirements...
Code of Federal Regulations, 2010 CFR
2010-10-01
... 49 Transportation 4 2010-10-01 2010-10-01 false Minimum Coefficient of Retroreflection (RA) (in Candela/Lux/Meter2) Requirement for Retroreflective Sheeting (Minimum Photometric Performance Requirements... Retroreflection (RA) (in Candela/Lux/Meter2) Requirement for Retroreflective Sheeting (Minimum Photometric...
49 CFR 178.705 - Standards for metal IBCs.
Code of Federal Regulations, 2012 CFR
2012-10-01
... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... metal lattice-work casing. (c) Construction requirements for metal IBCs are as follows: (1) Body. The... minimum elongation (as a percentage) of the reference steel to be used on fracture under tensile stress...
49 CFR 178.705 - Standards for metal IBCs.
Code of Federal Regulations, 2011 CFR
2011-10-01
... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY... metal lattice-work casing. (c) Construction requirements for metal IBCs are as follows: (1) Body. The... minimum elongation (as a percentage) of the reference steel to be used on fracture under tensile stress...
42 CFR 84.145 - Motor-operated blower test; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... failure or indication of excessive wear of bearings or other working parts. (d) Where a blower, which is... shall not exceed a force of 2.3 kg. (5 pounds) on a 20 cm. (8-inch) crank, as defined in § 84.146. (e...
42 CFR 84.145 - Motor-operated blower test; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... failure or indication of excessive wear of bearings or other working parts. (d) Where a blower, which is... shall not exceed a force of 2.3 kg. (5 pounds) on a 20 cm. (8-inch) crank, as defined in § 84.146. (e...
42 CFR 84.145 - Motor-operated blower test; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... failure or indication of excessive wear of bearings or other working parts. (d) Where a blower, which is... shall not exceed a force of 2.3 kg. (5 pounds) on a 20 cm. (8-inch) crank, as defined in § 84.146. (e...
42 CFR 84.145 - Motor-operated blower test; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... failure or indication of excessive wear of bearings or other working parts. (d) Where a blower, which is... shall not exceed a force of 2.3 kg. (5 pounds) on a 20 cm. (8-inch) crank, as defined in § 84.146. (e...
42 CFR 84.145 - Motor-operated blower test; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... failure or indication of excessive wear of bearings or other working parts. (d) Where a blower, which is... shall not exceed a force of 2.3 kg. (5 pounds) on a 20 cm. (8-inch) crank, as defined in § 84.146. (e...
Film viewing conditions in mammography.
Hill, S J; Faulkner, K; Law, J; Starritt, H C
1997-04-01
A requirement for a minimum viewing box brightness of 3000 cd m-2 for reading mammograms has been widely advocated. Some recent work has challenged that opinion by reporting no significant variation in visibility of low contrast and fine detail objects over a wide range of brightness levels. This paper provides further experimental evidence to support the latter conclusion, at least over the range 1340-4190 cd m-2, and suggests that the currently recommended minimum viewing box brightness levels need to be revised. The importance of reducing room lighting levels is fully confirmed.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Keller, J.; Lacava, W.; Austin, J.
2015-02-01
This work investigates the minimum level of fidelity required to accurately simulate wind turbine gearboxes using state-of-the-art design tools. Excessive model fidelity including drivetrain complexity, gearbox complexity, excitation sources, and imperfections, significantly increases computational time, but may not provide a commensurate increase in the value of the results. Essential designparameters are evaluated, including the planetary load-sharing factor, gear tooth load distribution, and sun orbit motion. Based on the sensitivity study results, recommendations for the minimum model fidelities are provided.
Airports in the United States: are they really breastfeeding friendly?
Haight, Michael; Ortiz, Joan
2014-12-01
State and federal laws have been enacted to protect the mother's right to breastfeed and provide breastmilk to her infant. The Patient Protection and Affordable Care Act requires employers to provide hourly waged nursing mothers a private place other than a bathroom, shielded from view, free from intrusion. Minimum requirement for a lactation room would be providing a private space other than a bathroom. Workplace lactation accommodation laws are in place in 24 states, Puerto Rico, and the District of Columbia. These requirements benefit the breast-pumping mother in an office, but what about the breast-pumping mother who travels? Of women with a child under a year, 55.8% are in the workforce. A significant barrier for working mothers to maintain breastfeeding is traveling, and they will need support from the workplace and the community. This study aimed to determine which airports offer the minimum requirements for a breast-pumping mother: private space other than a bathroom, with chair, table, and electrical outlet. A phone survey was done with the customer service representative at 100 U.S. airports. Confirmatory follow-up was done via e-mail. Of the respondents, 37% (n=37) reported having designated lactation rooms, 25% (n=25) considered the unisex/family restroom a lactation room, 8% (n=8) offer a space other than a bathroom with an electrical outlet, table, and chair, and 62% (n=62) answered yes to being breastfeeding friendly. Only 8% of the airports surveyed provided the minimum requirements for a lactation room. However 62% stated they were breastfeeding friendly. Airports need to be educated as to the minimum requirements for a lactation room.
Airports in the United States: Are They Really Breastfeeding Friendly?
Haight, Michael
2014-01-01
Abstract Introduction: State and federal laws have been enacted to protect the mother's right to breastfeed and provide breastmilk to her infant. The Patient Protection and Affordable Care Act requires employers to provide hourly waged nursing mothers a private place other than a bathroom, shielded from view, free from intrusion. Minimum requirement for a lactation room would be providing a private space other than a bathroom. Workplace lactation accommodation laws are in place in 24 states, Puerto Rico, and the District of Columbia. These requirements benefit the breast-pumping mother in an office, but what about the breast-pumping mother who travels? Of women with a child under a year, 55.8% are in the workforce. A significant barrier for working mothers to maintain breastfeeding is traveling, and they will need support from the workplace and the community. This study aimed to determine which airports offer the minimum requirements for a breast-pumping mother: private space other than a bathroom, with chair, table, and electrical outlet. Study Design: A phone survey was done with the customer service representative at 100 U.S. airports. Confirmatory follow-up was done via e-mail. Results: Of the respondents, 37% (n=37) reported having designated lactation rooms, 25% (n=25) considered the unisex/family restroom a lactation room, 8% (n=8) offer a space other than a bathroom with an electrical outlet, table, and chair, and 62% (n=62) answered yes to being breastfeeding friendly. Conclusions: Only 8% of the airports surveyed provided the minimum requirements for a lactation room. However 62% stated they were breastfeeding friendly. Airports need to be educated as to the minimum requirements for a lactation room. PMID:25313682
Experimental and Theoretical Study on Minimum Achievable Foil Thickness during Asymmetric Rolling
Tang, Delin; Liu, Xianghua; Song, Meng; Yu, Hailiang
2014-01-01
Parts produced by microforming are becoming ever smaller. Similarly, the foils required in micro-machines are becoming ever thinner. The asymmetric rolling technique is capable of producing foils that are thinner than those produced by the conventional rolling technique. The difference between asymmetric rolling and conventional rolling is the ‘cross-shear’ zone. However, the influence of the cross-shear zone on the minimum achievable foil thickness during asymmetric rolling is still uncertain. In this paper, we report experiments designed to understand this critical influencing factor on the minimum achievable thickness in asymmetric rolling. Results showed that the minimum achievable thickness of rolled foils produced by asymmetric rolling with a rolling speed ratio of 1.3 can be reduced to about 30% of that possible by conventional rolling technique. Furthermore, the minimum achievable thickness during asymmetric rolling could be correlated to the cross-shear ratio, which, in turn, could be related to the rolling speed ratio. From the experimental results, a formula to calculate the minimum achievable thickness was established, considering the parameters cross-shear ratio, friction coefficient, work roll radius, etc. in asymmetric rolling. PMID:25203265
29 CFR 783.26 - The section 6(b)(2) minimum wage requirement.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 29 Labor 3 2010-07-01 2010-07-01 false The section 6(b)(2) minimum wage requirement. 783.26... The section 6(b)(2) minimum wage requirement. Section 6(b), with paragraph (2) thereof, requires the... prescribed by” paragraph (1) of the subsection is the minimum wage rate applicable according to the schedule...
49 CFR 178.705 - Standards for metal IBCs.
Code of Federal Regulations, 2013 CFR
2013-10-01
... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...-work casing. (c) Construction requirements for metal IBCs are as follows: (1) Body. The body must be... minimum elongation (as a percentage) of the reference steel to be used on fracture under tensile stress...
49 CFR 178.705 - Standards for metal IBCs.
Code of Federal Regulations, 2014 CFR
2014-10-01
... Transportation Other Regulations Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY...-work casing. (c) Construction requirements for metal IBCs are as follows: (1) Body. The body must be... minimum elongation (as a percentage) of the reference steel to be used on fracture under tensile stress...
Design of landfill daily cells.
Panagiotakopoulos, D; Dokas, I
2001-08-01
The objective of this paper is to study the behaviour of the landfill soil-to-refuse (S/R) ratio when size, geometry and operating parameters of the daily cell vary over realistic ranges. A simple procedure is presented (1) for calculating the cell parameters values which minimise the S/R ratio and (2) for studying the sensitivity of this minimum S/R ratio to variations in cell size, final refuse density, working face length, lift height and cover thickness. In countries where daily soil cover is required, savings in landfill space could be realised following this procedure. The sensitivity of minimum S/R to variations in cell dimensions decreases with cell size. Working face length and lift height affect the S/R ratio significantly. This procedure also offers the engineer an additional tool for comparing one large daily cell with two or more smaller ones, at two different working faces within the same landfill.
Federal Register 2010, 2011, 2012, 2013, 2014
2011-08-12
...-AQ06 Protocol Gas Verification Program and Minimum Competency Requirements for Air Emission Testing... correct certain portions of the Protocol Gas Verification Program and Minimum Competency Requirements for... final rule that amends the Agency's Protocol Gas Verification Program (PGVP) and the minimum competency...
Preschools Under the Fair Labor Standards Act. (Revised).
ERIC Educational Resources Information Center
Employment Standards Administration (DOL), Washington, DC. Wage and Hour Div.
This pamphlet provides general information concerning the application of the Fair Labor Standards Act (FLSA) to employees of preschool centers. The contents include discussion of the purview of the Act regarding preschools; monetary requirements such as minimum wages and employee facilities; provisions for equal pay, overtime pay, work hours,…
Grade Non-Disclosure. NBER Working Paper No. 17465
ERIC Educational Resources Information Center
Gottlieb, Daniel; Smetters, Kent
2011-01-01
This paper documents and explains the existence of grade non-disclosure policies in Masters in Business Administration programs, why these policies are concentrated in highly-ranked programs, and why these policies are not prevalent in most other professional degree programs. Related policies, including honors and minimum grade requirements, are…
Preschools Under the Fair Labor Standards Act, July 1972.
ERIC Educational Resources Information Center
Employment Standards Administration (DOL), Washington, DC. Wage and Hour Div.
This pamphlet provides general information concerning the application of the Fair Labor Standards Act to employees of preschool centers. Included is a discussion of: (1) Basic Monetary Requirements, including minimum wages and facilities furnished to the preschool employees, (2) Equal Pay Provisions, (3) Overtime, (4) Hours Worked, (5) Exemptions,…
A review on setting appropriate reach length for biological assessment of boatable rivers
Researchers working on boatable rivers are presented with the task of selecting an appropriate stream length, or reach length, from which data will be collected. Ideally, the sampling effort applied is the minimum that will allow stated objectives to be addressed as required by a...
29 CFR 780.331 - Crew leaders and labor contractors.
Code of Federal Regulations, 2010 CFR
2010-07-01
... Employment in Agriculture That Is Exempted From the Minimum Wage and Overtime Pay Requirements Under Section... Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR STATEMENTS... performance of work by his crew and his authority to determine the wage rates paid to his workers. (c) There...
Legal Issues Involving Student Workers.
ERIC Educational Resources Information Center
Valentine, Harold; Zikmund, Dale G.
This paper outlines the provisions of the Fair Labor Standards Act (sometimes referred to as the Wage-Hour Law) that establishes a minimum wage, subminimum wage, training wage overtime pay, and recordkeeping requirements. The following topics are addressed: (1) covered employment; (2) exemptions; (3) hours worked; (4) board, lodging, and other…
Flying After Conducting an Aircraft Excessive Cabin Leakage Test.
Houston, Stephen; Wilkinson, Elizabeth
2016-09-01
Aviation medical specialists should be aware that commercial airline aircraft engineers may undertake a 'dive equivalent' operation while conducting maintenance activities on the ground. We present a worked example of an occupational risk assessment to determine a minimum safe preflight surface interval (PFSI) for an engineer before flying home to base after conducting an Excessive Cabin Leakage Test (ECLT) on an unserviceable aircraft overseas. We use published dive tables to determine the minimum safe PFSI. The estimated maximum depth acquired during the procedure varies between 10 and 20 fsw and the typical estimated bottom time varies between 26 and 53 min for the aircraft types operated by the airline. Published dive tables suggest that no minimum PFSI is required for such a dive profile. Diving tables suggest that no minimum PFSI is required for the typical ECLT dive profile within the airline; however, having conducted a risk assessment, which considered peak altitude exposure during commercial flight, the worst-case scenario test dive profile, the variability of interindividual inert gas retention, and our existing policy among other occupational groups within the airline, we advised that, in the absence of a bespoke assessment of the particular circumstances on the day, the minimum PFSI after conducting ECLT should be 24 h. Houston S, Wilkinson E. Flying after conducting an aircraft excessive cabin leakage test. Aerosp Med Hum Perform. 2016; 87(9):816-820.
12 CFR 932.8 - Minimum liquidity requirements.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 12 Banks and Banking 7 2011-01-01 2011-01-01 false Minimum liquidity requirements. 932.8 Section 932.8 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOME LOAN BANK RISK MANAGEMENT AND CAPITAL STANDARDS FEDERAL HOME LOAN BANK CAPITAL REQUIREMENTS § 932.8 Minimum liquidity requirements. In...
7 CFR 932.150 - Modified minimum quality requirements for canned green ripe olives.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 7 Agriculture 8 2010-01-01 2010-01-01 false Modified minimum quality requirements for canned green... (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts... requirements for canned green ripe olives. The minimum quality requirements prescribed in § 932.52 (a)(1) of...
7 CFR 932.150 - Modified minimum quality requirements for canned green ripe olives.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 7 Agriculture 8 2011-01-01 2011-01-01 false Modified minimum quality requirements for canned green... (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts... requirements for canned green ripe olives. The minimum quality requirements prescribed in § 932.52 (a)(1) of...
12 CFR 932.8 - Minimum liquidity requirements.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Minimum liquidity requirements. 932.8 Section 932.8 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOME LOAN BANK RISK MANAGEMENT AND CAPITAL STANDARDS FEDERAL HOME LOAN BANK CAPITAL REQUIREMENTS § 932.8 Minimum liquidity requirements. In...
47 CFR 22.951 - Minimum coverage requirement.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 47 Telecommunication 2 2010-10-01 2010-10-01 false Minimum coverage requirement. 22.951 Section 22.951 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES PUBLIC MOBILE SERVICES Cellular Radiotelephone Service § 22.951 Minimum coverage requirement. Applications for...
Detecting Hardware-assisted Hypervisor Rootkits within Nested Virtualized Environments
2012-06-14
least the minimum required for the guest OS and click “Next”. For 64-bit Windows 7 the minimum required is 2048 MB (Figure 66). Figure 66. Memory...prompted for Memory, allocate at least the minimum required for the guest OS, for 64-bit Windows 7 the minimum required is 2048 MB (Figure 79...130 21. Within the virtual disk creation wizard, select VDI for the file type (Figure 81). Figure 81. Select File Type 22. Select Dynamically
Student Pathways through High School to College. Preschool through Postsecondary.
ERIC Educational Resources Information Center
Pierce, David R.
The way students progress from high school to college is in need of change. This paper examines five programs for student pathways and determines which have enough promise to merit consideration by policymakers. "High Schools That Work" prepares students for college by requiring them to take a minimum core of courses. "Tech…
8 CFR 204.6 - Petitions for employment creation aliens.
Code of Federal Regulations, 2010 CFR
2010-01-01
... the new commercial enterprise. In the case of the Immigrant Investor Pilot Program, “employee” also... position that requires a minimum of 35 working hours per week. In the case of the Immigrant Investor Pilot... States dollars ($1,000,000). (g) Multiple investors—(1) General. The establishment of a new commercial...
32 CFR Appendix A to Part 32 - Contract Provisions
Code of Federal Regulations, 2013 CFR
2013-07-01
... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... involve the employment of mechanics or laborers shall include a provision for compliance with sections 102... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...
32 CFR Appendix A to Part 32 - Contract Provisions
Code of Federal Regulations, 2011 CFR
2011-07-01
... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... involve the employment of mechanics or laborers shall include a provision for compliance with sections 102... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...
32 CFR Appendix A to Part 32 - Contract Provisions
Code of Federal Regulations, 2012 CFR
2012-07-01
... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... involve the employment of mechanics or laborers shall include a provision for compliance with sections 102... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...
32 CFR Appendix A to Part 32 - Contract Provisions
Code of Federal Regulations, 2014 CFR
2014-07-01
... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... involve the employment of mechanics or laborers shall include a provision for compliance with sections 102... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...
40 CFR Appendix to Part 30 - Contract Provisions
Code of Federal Regulations, 2013 CFR
2013-07-01
... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... contracts that involve the employment of mechanics or laborers shall include a provision for compliance with... shall be required to compute the wages of every mechanic and laborer on the basis of a standard work...
40 CFR Appendix to Part 30 - Contract Provisions
Code of Federal Regulations, 2014 CFR
2014-07-01
... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... contracts that involve the employment of mechanics or laborers shall include a provision for compliance with... shall be required to compute the wages of every mechanic and laborer on the basis of a standard work...
40 CFR Appendix to Part 30 - Contract Provisions
Code of Federal Regulations, 2012 CFR
2012-07-01
... to laborers and mechanics at a rate not less than the minimum wages specified in a wage determination... contracts that involve the employment of mechanics or laborers shall include a provision for compliance with... shall be required to compute the wages of every mechanic and laborer on the basis of a standard work...
UAS Integration in the NAS Project Overview: RTCA SC-228 Plenary DAA Working Group 5
NASA Technical Reports Server (NTRS)
Randall, Debra K.
2014-01-01
The presentation is intended to allow the public to know and understand NASA's plans for integrated test to allow them the opportunity to provide feedback and suggestions. The integrated testing will support verification and validation of the RTCA SC-228 UAS minimum operation performance standard requirements.
ERIC Educational Resources Information Center
Gribble, Nigel; Dender, Alma; Lawrence, Emma; Manning, Kirrily; Falkmer, Torbjorn
2014-01-01
In the increasingly global world, skills in cultural competence now form part of the minimum standards of practice required for allied health professionals. During an international work-integrated learning (WIL) placement, allied health students' cultural competence is expected to be enhanced. The present study scrutinized reflective journals of…
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-26
... International Law (ACPIL)--Online Dispute Resolution (ODR) Study Group The Office of the Assistant Legal Adviser... guidelines and minimum requirements for online dispute resolution providers and arbitrators, substantive... that the working group is addressing is the identification of security issues relating to use of the...
Wege zur Festigung der Fachlexik (Ways of Building a Technical Vocabulary)
ERIC Educational Resources Information Center
Kalmykowa, Elena
1974-01-01
Learning to read foreign technical texts requires (a) a minimum vocabulary and (b) effective drill. The following are suggested: translation, question-answer method, definition exercises, exercises to develop skill in the use of reference works, schematic presentations and tables, annotating and making reports and summaries. (Text is in German.)…
Pelletier, Jennifer E; Schreiber, Liana R N; Laska, Melissa N
2017-07-01
To examine state variation in minimum stocking requirements for Special Supplemental Nutrition Program for Women, Infants, and Children (WIC)-authorized small food retailers. We obtained minimum stocking requirements for 50 states and the District of Columbia in 2017 from WIC Web pages or e-mail from the state WIC agency. We developed a coding protocol to compare minimum quantities and varieties required for 12 food and beverage categories. We calculated the median, range, and interquartile range for each measure. Nearly all states set minimum varieties and quantities of fruits and vegetables, 100% juice, whole grain-rich foods, breakfast cereal, milk, cheese, eggs, legumes, and peanut butter. Fewer states set requirements for canned fish, yogurt, and tofu. Most measures had a large range in minimum requirements (e.g., $8-$100 of fruits and vegetables, 60-144 oz of breakfast cereal). WIC-participating retailers must adhere to very different minimum stocking requirements across states, which may result in disparities in food and beverage products available to WIC recipients. Public Health Implications. The results provide benchmarks that can inform new local, state, and federal program and policy efforts to increase healthy food availability in retail settings.
Code of Federal Regulations, 2010 CFR
2010-07-01
... the minimum wage required by section 6(a) of the Fair Labor Standards Act? 520.200 Section 520.200... lower than the minimum wage required by section 6(a) of the Fair Labor Standards Act? Section 14(a) of..., for the payment of special minimum wage rates to workers employed as messengers, learners (including...
Code of Federal Regulations, 2010 CFR
2010-07-01
... 29 Labor 3 2010-07-01 2010-07-01 false Employees exempt from both minimum wage and overtime pay... Exemptions Under the Act; Other Special Requirements § 516.11 Employees exempt from both minimum wage and.... With respect to each and every employee exempt from both the minimum wage and overtime pay requirements...
Factors affecting heat illness when working in conditions of thermal stress.
Bates, G; Gazey, C; Cena, K
1996-06-01
In hot working conditions, high sweat rates with excessive loss of body fluids may result in dehydration and electrolyte imbalance. It is well established that dehydration and/or electrolyte disturbances will impair work performance, and, if prolonged or severe, can pose a serious risk to health. The lesser condition of hypohydration is undoubtedly widespread in the workplace, and may be indirectly responsible for less than optimal performance and workplace accidents. With the aid of a new sweat collection method, fluid and electrolyte loss from a population of male workers with varying fitness and body composition has been documented. This has provided the basis for prescribing guidelines of fluid replacement when working in the heat. In addition, the minimum duration of heat exposure required to trigger heat acclimmatization was sought using sweat sodium as an indicator. Rehydration at the rate of 500 ml/h (250 ml every 30 min) is recommended for people working in all but extreme heat (> 45 degrees C). Electrolyte supplements (sodium and potassium) are not generally required in the workplace, but may be warranted in certain circumstances to avoid hyponatremia (> 3 h). The ability to predict the susceptibility of an individual to fluid and electrolyte disturbances cannot be made from age, body composition, ethnicity or VO2max, although a high VO2max appears to enhance heat tolerance. Sodium loss in sweat varies greatly and is not significantly related to sweat rate. Acclimatization results in a significant decrease in sweat sodium and increased sweat rate during summer compared with winter. This advantageous physiological adaptation requires a minimum of 9 h of heat exposure to initiate.
78 FR 21060 - Appeal Proceedings Before the Commission
Federal Register 2010, 2011, 2012, 2013, 2014
2013-04-09
... adoption of alternate standards from those required by the Commission's minimum internal control standards... adoption of alternate standards from those required by the Commission's minimum internal control standards... TGRAs' adoption of alternate standards from those required by the Commission's minimum internal control...
The requirements of a specialist Breast Centre.
Wilson, A R M; Marotti, L; Bianchi, S; Biganzoli, L; Claassen, S; Decker, T; Frigerio, A; Goldhirsch, A; Gustafsson, E G; Mansel, R E; Orecchia, R; Ponti, A; Poortmans, P; Regitnig, P; Rosselli Del Turco, M; Rutgers, E J Th; van Asperen, C; Wells, C A; Wengström, Y; Cataliotti, L
2013-11-01
In recognition of the advances and evidence based changes in clinical practice that have occurred in recent years and taking into account the knowledge and experience accumulated through the voluntary breast unit certification programme, Eusoma has produced this up-dated and revised guidelines on the requirements of a Specialist Breast Centre (BC). The content of these guidelines is based on evidence from the recent relevant peer reviewed literature and the consensus of a multidisciplinary team of European experts. The guidelines define the requirements for each breast service and for the specialists who work in specialist Breast Centres. The guidelines identify the minimum requirements needed to set up a BC, these being an integrated Breast Centre, dealing with a sufficient number of cases to allow effective working and continuing expertise, dedicated specialists working with a multidisciplinary approach, providing all services throughout the patients pathway and data collection and audit. It is essential that the BC also guarantees the continuity of care for patients with advanced (metastatic) disease offering treatments according to multidisciplinary competencies and a high quality palliative care service. The BC must ensure that comprehensive support and expertise may be needed, not only through the core BC team, but also ensure that all other medical and paramedical expertise that may be necessary depending on the individual case are freely available, referring the patient to the specific care provider depending on the problem. Applying minimum requirements and quality indicators is essential to improve organisation, performance and outcome in breast care. Efficacy and compliance have to be constantly monitored to evaluate the quality of patient care and to allow appropriate corrective actions leading to improvements in patient care. Copyright © 2013 Elsevier Ltd. All rights reserved.
Scheduling a Medium-Sized Manufacturing Shop: A Simulation Study
1993-09-01
distinction, elements of work order data include: the minimum machine type required for a work order, as well as the prgramming , set-up, and machining... prevent this from happening. Such a mechanism could take the form of a reprioritization function that is executed after a specified period of time...system for a very long time unless some mechanism is used to prevent this from happening. The jobs left in the system will be the ones that have very
Legal ramifications of per visit pay in the USA.
Milligan, Jennifer
2006-02-01
Agencies, which are subject to the FLSA, (Fair Labor Standards Act), must pay their covered employees the minimum wage required by law and overtime pay at a rate of one-and-one-half times the employee's regular hourly rate for hours worked in excess of forty hours in a work week. Failure to do so can result in substantial liability for not only the unpaid wages, but for significant penalties and the employee's attorney's fees as well.
42 CFR 84.197 - Respirator containers; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Respirator containers; minimum requirements. 84.197... Cartridge Respirators § 84.197 Respirator containers; minimum requirements. Respirators shall be equipped with a substantial, durable container bearing markings which show the applicant's name, the type and...
9 CFR 2.130 - Minimum age requirements.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 9 Animals and Animal Products 1 2012-01-01 2012-01-01 false Minimum age requirements. 2.130... AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.130 Minimum age requirements. No dog or cat shall be... least eight (8) weeks of age and has been weaned. ...
9 CFR 2.130 - Minimum age requirements.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 9 Animals and Animal Products 1 2014-01-01 2014-01-01 false Minimum age requirements. 2.130... AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.130 Minimum age requirements. No dog or cat shall be... least eight (8) weeks of age and has been weaned. ...
9 CFR 2.130 - Minimum age requirements.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 9 Animals and Animal Products 1 2013-01-01 2013-01-01 false Minimum age requirements. 2.130... AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.130 Minimum age requirements. No dog or cat shall be... least eight (8) weeks of age and has been weaned. ...
9 CFR 2.130 - Minimum age requirements.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 9 Animals and Animal Products 1 2011-01-01 2011-01-01 false Minimum age requirements. 2.130... AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.130 Minimum age requirements. No dog or cat shall be... least eight (8) weeks of age and has been weaned. ...
Axial propulsion with flapping and rotating wings, a comparison of potential efficiency.
Kroninger, Christopher M
2018-04-18
Interest in biological locomotion and what advantages the principles governing it might offer in the design of manmade vehicles prompts one to consider the power requirements of flapping relative to rotary propulsion. The amount of work performed on the fluid surrounding a thrusting surface (wing or blade) is reflected in the kinetic energy of the wake. Consideration of the energy in the wake is sufficient to define absolute minimum limitations on the power requirement to generate a particular thrust. This work applies wake solutions to compare the minimum inviscid propulsive power requirement of wings flapping and in rotation at wing loading conditions reflective of hover through a state of lightly-loaded cruise. It is demonstrated that hovering flapping flight is less efficient than rotary wing propulsion except for the most extreme flap amplitude strokes ([Formula: see text] > 160°) if operating at large wake wavelength. In cruise, a larger range of flap amplitude kinematics ([Formula: see text] > 140°) can be aerodynamically more energy efficient for wake wavelengths reflective of biological propulsion. These results imply, based on the observed wing kinematics of continuous steady flight, that flapping propulsion in animals is unlikely to be more efficient than rotary propulsion.
7 CFR 51.311 - Marking requirements.
Code of Federal Regulations, 2012 CFR
2012-01-01
... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...
7 CFR 51.311 - Marking requirements.
Code of Federal Regulations, 2010 CFR
2010-01-01
... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...
7 CFR 51.311 - Marking requirements.
Code of Federal Regulations, 2011 CFR
2011-01-01
... STANDARDS) United States Standards for Grades of Apples Marking Requirements § 51.311 Marking requirements... minimum diameter of apples packed in a closed container shall be indicated on the container. For apple... varieties, the minimum diameter and minimum weight of apples packed in a closed container shall be indicated...
42 CFR 84.134 - Respirator containers; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Respirator containers; minimum requirements. 84.134... Respirators § 84.134 Respirator containers; minimum requirements. Supplied-air respirators shall be equipped with a substantial, durable container bearing markings which show the applicant's name, the type and...
42 CFR 84.125 - Particulate tests; canisters containing particulate filters; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... filters; minimum requirements. 84.125 Section 84.125 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF... RESPIRATORY PROTECTIVE DEVICES Gas Masks § 84.125 Particulate tests; canisters containing particulate filters; minimum requirements. Gas mask canisters containing filters for protection against particulates (e.g...
42 CFR 84.125 - Particulate tests; canisters containing particulate filters; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... filters; minimum requirements. 84.125 Section 84.125 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF... RESPIRATORY PROTECTIVE DEVICES Gas Masks § 84.125 Particulate tests; canisters containing particulate filters; minimum requirements. Gas mask canisters containing filters for protection against particulates (e.g...
42 CFR 84.125 - Particulate tests; canisters containing particulate filters; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... filters; minimum requirements. 84.125 Section 84.125 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF... RESPIRATORY PROTECTIVE DEVICES Gas Masks § 84.125 Particulate tests; canisters containing particulate filters; minimum requirements. Gas mask canisters containing filters for protection against particulates (e.g...
42 CFR 84.125 - Particulate tests; canisters containing particulate filters; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... filters; minimum requirements. 84.125 Section 84.125 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF... RESPIRATORY PROTECTIVE DEVICES Gas Masks § 84.125 Particulate tests; canisters containing particulate filters; minimum requirements. Gas mask canisters containing filters for protection against particulates (e.g...
42 CFR 84.125 - Particulate tests; canisters containing particulate filters; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... filters; minimum requirements. 84.125 Section 84.125 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF... RESPIRATORY PROTECTIVE DEVICES Gas Masks § 84.125 Particulate tests; canisters containing particulate filters; minimum requirements. Gas mask canisters containing filters for protection against particulates (e.g...
47 CFR 22.951 - Minimum coverage requirement.
Code of Federal Regulations, 2011 CFR
2011-10-01
... MOBILE SERVICES Cellular Radiotelephone Service § 22.951 Minimum coverage requirement. Applications for authority to operate a new cellular system in an unserved area, other than those filed by the licensee of an... toward the minimum coverage requirement. Applications for authority to operate a new cellular system in...
42 CFR 84.74 - Apparatus containers; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 1 2011-10-01 2011-10-01 false Apparatus containers; minimum requirements. 84.74...-Contained Breathing Apparatus § 84.74 Apparatus containers; minimum requirements. (a) Apparatus may be...) Containers supplied by the applicant for carrying or storing self-contained breathing apparatus will be...
42 CFR 84.74 - Apparatus containers; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Apparatus containers; minimum requirements. 84.74...-Contained Breathing Apparatus § 84.74 Apparatus containers; minimum requirements. (a) Apparatus may be...) Containers supplied by the applicant for carrying or storing self-contained breathing apparatus will be...
An improved measurement system for FOG pure lag time with no changing of FOG work status
NASA Astrophysics Data System (ADS)
Chen, X.; Yang, J. H.; Zhou, Y. L.; Shu, X. W.
2018-05-01
The minimum pure lag time is an important factor for characterizing the dynamic performance of fiber optical gyroscope. It is defined as the time duration from the reception of velocity-shock signal to the output of corresponding fiber-optic gyroscope data. Many engineering projects have required for this index specifically, so the measurement of the minimum pure lag time is highly demanded. In typically measurement system, the work status of tested FOG has to be changed. In this work, a FOG pure lag time measurement system without changing the work status of the FOG has been demonstrated. During the operation of this test system, the impact structure generated a shock towards the FOG, and the pure lag time was measured through data processing analysis. The design scheme and test principle have been researched and analyzed in detail. And a prototype has been developed and used for experiment successfully. This measurement system can realize a measurement accuracy of better than ±3 μs and a system resolution of 108.6ns.
Abandoning wells working group
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
The primary objective of this working group is to identify major technical, regulatory, and environmental issues that are relevant to the abandonment of offshore wellbores. Once the issues have been identified, the working group also has the objective of making recommendations or providing potential solutions for consideration. Areas for process improvement will be identified and {open_quotes}best practices{close_quotes} will be discussed and compared to {open_quotes}minimum standards.{close_quotes} The working group will primarily focus on wellbore abandonment in the Gulf of Mexico. However, workshop participants are encouraged to discuss international issues which may be relevant to wellbore abandonment practices in the Gulf ofmore » Mexico. The Abandoning Wells Group has identified several major areas for discussion that have concerns related to both operators and service companies performing wellbore abandonments in the Gulf of Mexico. The following broad topics were selected for the agenda: (1) MMS minimum requirements and state regulations. (2) Co-existence of best practices, new technology, and P & A economics. (3) Liability and environmental issues relating to wellbore abandonment.« less
Development of a Self Aligned CMOS Process for Flash Lamp Annealed Polycrystalline Silicon TFTs
NASA Astrophysics Data System (ADS)
Bischoff, Paul
The emerging active matrix liquid crystal (AMLCD) display market requires a high performing semiconductor material to meet rising standards of operation. Currently amorphous silicon (a-Si) dominates the market but it does not have the required mobility for it to be used in AMLCD manufacturing. Other materials have been developed including crystallizing a-Si into poly-silicon. A new approach to crystallization through the use of flash lamp annealing (FLA) decreases manufacturing time and greatly improves carrier mobility. Previous work on FLA silicon for the use in CMOS transistors revealed significant lateral dopant diffusion into the channel greatly increasing the minimum channel length required for a working device. This was further confounded by the gate overlap due to misalignment during lithography patterning steps. Through the use of furnace dopant activation instead of FLA dopant activation and a self aligned gate the minimum size transistor can be greatly reduced. A new lithography mask and process flow were developed for the furnace annealing and self aligned gate. Fabrication of the self aligned devices resulted in oxidation of the Molybdenum self aligned gate. Further development is needed to successfully manufacture these devices. Non-self aligned transistors were made simultaneously with self aligned devices and used the furnace activation. These devices showed an increase in sheet resistance from 250 O to 800 O and lower mobility from 380 to 40.2 V/cm2s. The lower mobility can be contributed to an increase in implanted trap density indicating furnace annealing is an inferior activation method over FLA. The minimum transistor size however was reduced from 20 to 5 mum. With improvements in the self aligned process high performing small devices can be manufactured.
Code of Federal Regulations, 2010 CFR
2010-07-01
... short circuit protection; minimum requirements. 77.506-1 Section 77.506-1 Mineral Resources MINE SAFETY...-1 Electric equipment and circuits; overload and short circuit protection; minimum requirements. Devices providing either short circuit protection or protection against overload shall conform to the...
13 CFR 107.210 - Minimum capital requirements for Licensees.
Code of Federal Regulations, 2010 CFR
2010-01-01
... except the minimum capital requirement, as determined solely by SBA; (ii) Has a viable business plan... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Minimum capital requirements for Licensees. 107.210 Section 107.210 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION SMALL...
12 CFR 217.10 - Minimum capital requirements.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 12 Banks and Banking 2 2014-01-01 2014-01-01 false Minimum capital requirements. 217.10 Section 217.10 Banks and Banking FEDERAL RESERVE SYSTEM BOARD OF GOVERNORS OF THE FEDERAL RESERVE SYSTEM CAPITAL ADEQUACY OF BOARD-REGULATED INSTITUTIONS Capital Ratio Requirements and Buffers § 217.10 Minimum...
42 CFR 84.87 - Compressed gas filters; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Compressed gas filters; minimum requirements. 84.87...-Contained Breathing Apparatus § 84.87 Compressed gas filters; minimum requirements. All self-contained breathing apparatus using compressed gas shall have a filter downstream of the gas source to effectively...
42 CFR 84.87 - Compressed gas filters; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 1 2013-10-01 2013-10-01 false Compressed gas filters; minimum requirements. 84.87...-Contained Breathing Apparatus § 84.87 Compressed gas filters; minimum requirements. All self-contained breathing apparatus using compressed gas shall have a filter downstream of the gas source to effectively...
42 CFR 84.87 - Compressed gas filters; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 1 2011-10-01 2011-10-01 false Compressed gas filters; minimum requirements. 84.87...-Contained Breathing Apparatus § 84.87 Compressed gas filters; minimum requirements. All self-contained breathing apparatus using compressed gas shall have a filter downstream of the gas source to effectively...
42 CFR 84.87 - Compressed gas filters; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 1 2012-10-01 2012-10-01 false Compressed gas filters; minimum requirements. 84.87...-Contained Breathing Apparatus § 84.87 Compressed gas filters; minimum requirements. All self-contained breathing apparatus using compressed gas shall have a filter downstream of the gas source to effectively...
42 CFR 84.87 - Compressed gas filters; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 1 2014-10-01 2014-10-01 false Compressed gas filters; minimum requirements. 84.87...-Contained Breathing Apparatus § 84.87 Compressed gas filters; minimum requirements. All self-contained breathing apparatus using compressed gas shall have a filter downstream of the gas source to effectively...
9 CFR 2.130 - Minimum age requirements.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Minimum age requirements. 2.130 Section 2.130 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE ANIMAL WELFARE REGULATIONS Miscellaneous § 2.130 Minimum age requirements. No dog or cat shall be...
32 CFR 552.73 - Minimum requirements for automobile insurance policies.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 32 National Defense 3 2010-07-01 2010-07-01 true Minimum requirements for automobile insurance policies. 552.73 Section 552.73 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Military Reservations § 552.73 Minimum requirements for automobile insurance policies. Policies sold on...
32 CFR 552.73 - Minimum requirements for automobile insurance policies.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 32 National Defense 3 2014-07-01 2014-07-01 false Minimum requirements for automobile insurance policies. 552.73 Section 552.73 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Military Reservations § 552.73 Minimum requirements for automobile insurance policies. Policies sold on...
32 CFR 552.73 - Minimum requirements for automobile insurance policies.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 32 National Defense 3 2012-07-01 2009-07-01 true Minimum requirements for automobile insurance policies. 552.73 Section 552.73 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Military Reservations § 552.73 Minimum requirements for automobile insurance policies. Policies sold on...
32 CFR 552.73 - Minimum requirements for automobile insurance policies.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 32 National Defense 3 2013-07-01 2013-07-01 false Minimum requirements for automobile insurance policies. 552.73 Section 552.73 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Military Reservations § 552.73 Minimum requirements for automobile insurance policies. Policies sold on...
32 CFR 552.73 - Minimum requirements for automobile insurance policies.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 32 National Defense 3 2011-07-01 2009-07-01 true Minimum requirements for automobile insurance policies. 552.73 Section 552.73 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY... Military Reservations § 552.73 Minimum requirements for automobile insurance policies. Policies sold on...
48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...
Federal Register 2010, 2011, 2012, 2013, 2014
2012-03-09
... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Part 1 [REG-110980-10] RIN 1545-BJ55 Modifications to Minimum Present Value Requirements for Partial Annuity Distribution Options Under Defined... FR 5454), providing guidance relating to the minimum present value requirements applicable to certain...
30 CFR 77.1706 - First aid training program; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First aid training program; minimum... OF UNDERGROUND COAL MINES Miscellaneous § 77.1706 First aid training program; minimum requirements. (a) All first aid training programs required under the provisions of §§ 77.1703 and 77.1704 shall...
48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 48 Federal Acquisition Regulations System 5 2013-10-01 2013-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...
48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 48 Federal Acquisition Regulations System 5 2011-10-01 2011-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...
48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 48 Federal Acquisition Regulations System 5 2012-10-01 2012-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...
48 CFR 852.219-9 - VA Small business subcontracting plan minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 48 Federal Acquisition Regulations System 5 2014-10-01 2014-10-01 false VA Small business... Provisions and Clauses 852.219-9 VA Small business subcontracting plan minimum requirements. As prescribed in subpart 819.709, insert the following clause: VA Small Business Subcontracting Plan Minimum Requirements...
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 1 2011-10-01 2011-10-01 false Timers; elapsed time indicators; remaining service life indicators; minimum requirements. 84.83 Section 84.83 Public Health PUBLIC HEALTH SERVICE... indicators; remaining service life indicators; minimum requirements. (a) Elapsed time indicators shall be...
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Timers; elapsed time indicators; remaining service life indicators; minimum requirements. 84.83 Section 84.83 Public Health PUBLIC HEALTH SERVICE... indicators; remaining service life indicators; minimum requirements. (a) Elapsed time indicators shall be...
12 CFR 325.6 - Issuance of directives.
Code of Federal Regulations, 2010 CFR
2010-01-01
... is a final order issued to a bank that fails to maintain capital at or above the minimum leverage... operating with less than the minimum leverage capital requirement established by this regulation, the Board... directive requiring the bank to restore its capital to the minimum leverage capital requirement within a...
49 CFR 236.0 - Applicability, minimum requirements, and penalties.
Code of Federal Regulations, 2013 CFR
2013-10-01
... persons, or has caused death or injury, a penalty not to exceed $105,000 per violation may be assessed... 49 Transportation 4 2013-10-01 2013-10-01 false Applicability, minimum requirements, and penalties... § 236.0 Applicability, minimum requirements, and penalties. (a) Except as provided in paragraph (b) of...
49 CFR 236.0 - Applicability, minimum requirements, and penalties.
Code of Federal Regulations, 2014 CFR
2014-10-01
... persons, or has caused death or injury, a penalty not to exceed $105,000 per violation may be assessed... 49 Transportation 4 2014-10-01 2014-10-01 false Applicability, minimum requirements, and penalties... § 236.0 Applicability, minimum requirements, and penalties. (a) Except as provided in paragraph (b) of...
49 CFR 236.0 - Applicability, minimum requirements, and penalties.
Code of Federal Regulations, 2011 CFR
2011-10-01
... persons, or has caused death or injury, a penalty not to exceed $100,000 per violation may be assessed... 49 Transportation 4 2011-10-01 2011-10-01 false Applicability, minimum requirements, and penalties... § 236.0 Applicability, minimum requirements, and penalties. (a) Except as provided in paragraph (b) of...
49 CFR 236.0 - Applicability, minimum requirements, and penalties.
Code of Federal Regulations, 2012 CFR
2012-10-01
... persons, or has caused death or injury, a penalty not to exceed $105,000 per violation may be assessed... 49 Transportation 4 2012-10-01 2012-10-01 false Applicability, minimum requirements, and penalties... § 236.0 Applicability, minimum requirements, and penalties. (a) Except as provided in paragraph (b) of...
49 CFR 236.0 - Applicability, minimum requirements, and penalties.
Code of Federal Regulations, 2010 CFR
2010-10-01
... persons, or has caused death or injury, a penalty not to exceed $100,000 per violation may be assessed... 49 Transportation 4 2010-10-01 2010-10-01 false Applicability, minimum requirements, and penalties... § 236.0 Applicability, minimum requirements, and penalties. (a) Except as provided in paragraph (b) of...
Short Training Course in Oceanography. Red Sea & Gulf of Aden Programme (PERSGA).
ERIC Educational Resources Information Center
Arab Organization for Education and Science, Cairo (Egypt).
This document presents a training course in oceanography intended for Junior Bachelor of Science (B.S.) graduates in physics, mathematics, chemistry, zoology, botany or geology to give them the minimum qualifications required to work in any of the marine science stations. This 14-week course, organized by the Arab League Educational, Cultural and…
ERIC Educational Resources Information Center
Alabama State Dept. of Education, Montgomery.
This guide, which is intended for classroom teachers, supervisors, and administrators throughout Alabama, contains the minimum required content (core program) for public school instruction in family and consumer sciences education in grades 7-12. Presented first are the following: introduction examining the objectives/delivery of family and…
45 CFR Appendix A to Part 74 - Contract Provisions
Code of Federal Regulations, 2012 CFR
2012-10-01
... mechanics at a rate not less than the minimum wages specified in a wage determination made by the Secretary... the employment of mechanics or laborers shall include a provision for compliance with sections 102 and... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...
45 CFR Appendix A to Part 74 - Contract Provisions
Code of Federal Regulations, 2014 CFR
2014-10-01
... mechanics at a rate not less than the minimum wages specified in a wage determination made by the Secretary... the employment of mechanics or laborers shall include a provision for compliance with sections 102 and... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...
45 CFR Appendix A to Part 74 - Contract Provisions
Code of Federal Regulations, 2011 CFR
2011-10-01
... mechanics at a rate not less than the minimum wages specified in a wage determination made by the Secretary... the employment of mechanics or laborers shall include a provision for compliance with sections 102 and... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...
45 CFR Appendix A to Part 74 - Contract Provisions
Code of Federal Regulations, 2013 CFR
2013-10-01
... mechanics at a rate not less than the minimum wages specified in a wage determination made by the Secretary... the employment of mechanics or laborers shall include a provision for compliance with sections 102 and... required to compute the wages of every mechanic and laborer on the basis of a standard work week of 40...
29 CFR 780.1006 - In or about a home.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 29 Labor 3 2014-07-01 2014-07-01 false In or about a home. 780.1006 Section 780.1006 Labor... Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child Labor Provisions Under Section 13(d) Requirements for Exemption § 780.1006 In or about a home. Whether the work of...
29 CFR 780.1006 - In or about a home.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 29 Labor 3 2012-07-01 2012-07-01 false In or about a home. 780.1006 Section 780.1006 Labor... Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child Labor Provisions Under Section 13(d) Requirements for Exemption § 780.1006 In or about a home. Whether the work of...
29 CFR 780.1006 - In or about a home.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 29 Labor 3 2011-07-01 2011-07-01 false In or about a home. 780.1006 Section 780.1006 Labor... Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child Labor Provisions Under Section 13(d) Requirements for Exemption § 780.1006 In or about a home. Whether the work of...
29 CFR 780.1006 - In or about a home.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 29 Labor 3 2010-07-01 2010-07-01 false In or about a home. 780.1006 Section 780.1006 Labor... Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child Labor Provisions Under Section 13(d) Requirements for Exemption § 780.1006 In or about a home. Whether the work of...
29 CFR 780.1006 - In or about a home.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 29 Labor 3 2013-07-01 2013-07-01 false In or about a home. 780.1006 Section 780.1006 Labor... Home- workers in Making Wreaths; Exemption From Minimum Wage, Overtime Compensation, and Child Labor Provisions Under Section 13(d) Requirements for Exemption § 780.1006 In or about a home. Whether the work of...
ERIC Educational Resources Information Center
Jenkinson, Kate A.; Benson, Amanda C.
2016-01-01
Pre-service teacher programs have a responsibility to equip graduating students with more than the minimum skill sets required by governing bodies. The Assessment and Mentoring Program (AMP) is a four-way collaborative mentoring learning community underpinned by social constructivism. Conducted in Victoria, Australia during the 2014-2016 academic…
Sasaki, Michiya; Ogino, Haruyuki; Hattori, Takatoshi
2018-06-08
In order to prove a small increment in a risk of concern in an epidemiological study, a large sample of a population is generally required. Since the background risk of an end point of interest, such as cancer mortality, is affected by various factors, such as lifestyle (diet, smoking, etc.), adjustment for such factors is necessary. However, it is impossible to inclusively and completely adjust for such factors; therefore, uncertainty in the background risk remains for control and exposed populations, indicating that there is a minimum limit to the lower bound for the provable risk regardless of the sample size. In this case study, we developed and discussed the minimum provable risk considering the uncertainty in background risk for hypothetical populations by referring to recent Japanese statistical information to grasp the extent of the minimum provable risk. Risk of fatal diseases due to radiation exposure, which has recently been the focus of radiological protection, was also examined by comparative assessment of the minimum provable risk for cancer and circulatory diseases. It was estimated that the minimum provable risk for circulatory disease mortality was much greater than that for cancer mortality, approximately five to seven times larger; circulatory disease mortality is more difficult to prove as a radiation risk than cancer mortality under the conditions used in this case study.This is an open-access article distributed under the terms of the Creative Commons Attribution-Non Commercial-No Derivatives License 4.0 (CCBY-NC-ND), where it is permissible to download and share the work provided it is properly cited. The work cannot be changed in any way or used commercially without permission from the journal.
Anesthesiologists' perceptions of minimum acceptable work habits of nurse anesthetists.
Logvinov, Ilana I; Dexter, Franklin; Hindman, Bradley J; Brull, Sorin J
2017-05-01
Work habits are non-technical skills that are an important part of job performance. Although non-technical skills are usually evaluated on a relative basis (i.e., "grading on a curve"), validity of evaluation on an absolute basis (i.e., "minimum passing score") needs to be determined. Survey and observational study. None. None. The theme of "work habits" was assessed using a modification of Dannefer et al.'s 6-item scale, with scores ranging from 1 (lowest performance) to 5 (highest performance). E-mail invitations were sent to all consultant and fellow anesthesiologists at Mayo Clinic in Florida, Arizona, and Minnesota. Because work habits expectations can be generational, the survey was designed for adjustment based on all invited (responding or non-responding) anesthesiologists' year of graduation from residency. The overall mean±standard deviation of the score for anesthesiologists' minimum expectations of nurse anesthetists' work habits was 3.64±0.66 (N=48). Minimum acceptable scores were correlated with the year of graduation from anesthesia residency (linear regression P=0.004). Adjusting for survey non-response using all N=207 anesthesiologists, the mean of the minimum acceptable work habits adjusted for year of graduation was 3.69 (standard error 0.02). The minimum expectations for nurse anesthetists' work habits were compared with observational data obtained from the University of Iowa. Among 8940 individual nurse anesthetist work habits scores, only 2.6% were <3.69. All N=65 of the Iowa nurse anesthetists' mean work habits scores were significantly greater than the Mayo estimate (3.69) for the minimum expectations; all P<0.00024. Our results suggest that routinely evaluated work habits of nurse anesthetists within departments should not be compared with an appropriate minimum score (i.e., of 3.69). Instead, work habits scores should be analyzed based on relative reporting among anesthetists. Copyright © 2017 Elsevier Inc. All rights reserved.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Electric equipment and circuits; overload and short circuit protection; minimum requirements. 75.518-1 Section 75.518-1 Mineral Resources MINE SAFETY... short circuit protection; minimum requirements. A device to provide either short circuit protection or...
Code of Federal Regulations, 2010 CFR
2010-01-01
... minimum wage requirements in determining prevailing rates. 532.205 Section 532.205 Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS PREVAILING RATE SYSTEMS Prevailing Rate Determinations § 532.205 The use of Federal, State, and local minimum wage requirements in determining prevailing...
26 CFR 1.410(b)-1 - Minimum coverage requirements (before 1994).
Code of Federal Regulations, 2011 CFR
2011-04-01
... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES (CONTINUED) Pension, Profit-Sharing, Stock Bonus Plans, Etc... the minimum age and service requirements (if any) prescribed by the plan, as of the date coverage is... employees (including employees who do not satisfy the minimum age or service requirements of the plan) are...
46 CFR 52.05-30 - Minimum requirements for attachment welds (modifies PW-16).
Code of Federal Regulations, 2010 CFR
2010-10-01
... 46 Shipping 2 2010-10-01 2010-10-01 false Minimum requirements for attachment welds (modifies PW-16). 52.05-30 Section 52.05-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Requirements for Boilers Fabricated by Welding § 52.05-30 Minimum...
Code of Federal Regulations, 2010 CFR
2010-10-01
... C supplied-air respirator, demand class; minimum requirements. (a) Inhalation resistance shall not... 42 Public Health 1 2010-10-01 2010-10-01 false Airflow resistance test; Type C supplied-air respirator, demand class; minimum requirements. 84.156 Section 84.156 Public Health PUBLIC HEALTH SERVICE...
Code of Federal Regulations, 2011 CFR
2011-04-01
... 17 Commodity and Securities Exchanges 1 2011-04-01 2011-04-01 false Minimum financial requirements... forex transactions. 5.7 Section 5.7 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION OFF-EXCHANGE FOREIGN CURRENCY TRANSACTIONS § 5.7 Minimum financial requirements for retail foreign...
40 CFR 131.6 - Minimum requirements for water quality standards submission.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 40 Protection of Environment 21 2010-07-01 2010-07-01 false Minimum requirements for water quality standards submission. 131.6 Section 131.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS General Provisions § 131.6 Minimum requirements for water quality standards submission. The...
40 CFR 131.6 - Minimum requirements for water quality standards submission.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 40 Protection of Environment 22 2011-07-01 2011-07-01 false Minimum requirements for water quality standards submission. 131.6 Section 131.6 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER PROGRAMS WATER QUALITY STANDARDS General Provisions § 131.6 Minimum requirements for water quality standards submission. The...
46 CFR 52.05-30 - Minimum requirements for attachment welds (modifies PW-16).
Code of Federal Regulations, 2011 CFR
2011-10-01
... 46 Shipping 2 2011-10-01 2011-10-01 false Minimum requirements for attachment welds (modifies PW-16). 52.05-30 Section 52.05-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Requirements for Boilers Fabricated by Welding § 52.05-30 Minimum...
46 CFR 52.05-30 - Minimum requirements for attachment welds (modifies PW-16).
Code of Federal Regulations, 2012 CFR
2012-10-01
... 46 Shipping 2 2012-10-01 2012-10-01 false Minimum requirements for attachment welds (modifies PW-16). 52.05-30 Section 52.05-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Requirements for Boilers Fabricated by Welding § 52.05-30 Minimum...
46 CFR 52.05-30 - Minimum requirements for attachment welds (modifies PW-16).
Code of Federal Regulations, 2013 CFR
2013-10-01
... 46 Shipping 2 2013-10-01 2013-10-01 false Minimum requirements for attachment welds (modifies PW-16). 52.05-30 Section 52.05-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Requirements for Boilers Fabricated by Welding § 52.05-30 Minimum...
46 CFR 52.05-30 - Minimum requirements for attachment welds (modifies PW-16).
Code of Federal Regulations, 2014 CFR
2014-10-01
... 46 Shipping 2 2014-10-01 2014-10-01 false Minimum requirements for attachment welds (modifies PW-16). 52.05-30 Section 52.05-30 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) MARINE ENGINEERING POWER BOILERS Requirements for Boilers Fabricated by Welding § 52.05-30 Minimum...
10 CFR 905.16 - What are the requirements for the minimum investment report alternative?
Code of Federal Regulations, 2010 CFR
2010-01-01
... number, email and Website if applicable, and contact person; (2) Authority or requirement to undertake a..., in writing, a minimum investment report every 5 years. (h) Maintaining minimum investment reports. (1...
Absence of metastable states in strained monoatomic cubic crystals.
NASA Astrophysics Data System (ADS)
Aguayo, Aarón; Mehl, Michael L.; de Coss, Romeo
2005-03-01
The Bain path distortion of a metal with an fcc (bcc) ground state toward the bcc (fcc) structure initially requires an increase in energy, but at some point along the Bain path the energy will again decrease until a local minimum is reached. We have studied the tetragonal distortion (Bain path) of monoatomic cubic crystals, using a combination of parametrized tight-binding and first-principles linearized augmented plane wave calculations. We show that this local minimum is unstable with respect to an elastic distortion, except in the rare case that the minimum is at the bcc (fcc) point on the Bain path. This shows that body-centered-tetragonal phases of these materials, which have been seen in epitaxially grown thin films, must be stabilized by the substrate and cannot be freestanding films. This work was partially supported by Consejo Nacional de Ciencia y Tecnolog'ia (CONACYT, M'exico) under Grant No. 43830-F.
A mixed-integer linear programming approach to the reduction of genome-scale metabolic networks.
Röhl, Annika; Bockmayr, Alexander
2017-01-03
Constraint-based analysis has become a widely used method to study metabolic networks. While some of the associated algorithms can be applied to genome-scale network reconstructions with several thousands of reactions, others are limited to small or medium-sized models. In 2015, Erdrich et al. introduced a method called NetworkReducer, which reduces large metabolic networks to smaller subnetworks, while preserving a set of biological requirements that can be specified by the user. Already in 2001, Burgard et al. developed a mixed-integer linear programming (MILP) approach for computing minimal reaction sets under a given growth requirement. Here we present an MILP approach for computing minimum subnetworks with the given properties. The minimality (with respect to the number of active reactions) is not guaranteed by NetworkReducer, while the method by Burgard et al. does not allow specifying the different biological requirements. Our procedure is about 5-10 times faster than NetworkReducer and can enumerate all minimum subnetworks in case there exist several ones. This allows identifying common reactions that are present in all subnetworks, and reactions appearing in alternative pathways. Applying complex analysis methods to genome-scale metabolic networks is often not possible in practice. Thus it may become necessary to reduce the size of the network while keeping important functionalities. We propose a MILP solution to this problem. Compared to previous work, our approach is more efficient and allows computing not only one, but even all minimum subnetworks satisfying the required properties.
30 CFR 250.908 - What are the minimum structural fatigue design requirements?
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 2 2010-07-01 2010-07-01 false What are the minimum structural fatigue design... Platform Approval Program § 250.908 What are the minimum structural fatigue design requirements? (a) API RP... (incorporated by reference as specified in 30 CFR 250.198), requires that the design fatigue life of each joint...
13 CFR 120.473 - Procedures for determining individual minimum capital requirement.
Code of Federal Regulations, 2011 CFR
2011-01-01
...) Decision. After the close of the SBLC's response period, the AA/CA will decide, based on a review of SBA... requirement by the specified date, either the SBLC or the AA/CA may propose to the other a change in the... determining individual minimum capital requirement. (a) Notice. When SBA determines that an individual minimum...
26 CFR 1.412(c)(1)-3 - Applying the minimum funding requirements to restored plans.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 26 Internal Revenue 5 2013-04-01 2013-04-01 false Applying the minimum funding requirements to..., Stock Bonus Plans, Etc. § 1.412(c)(1)-3 Applying the minimum funding requirements to restored plans. (a) In general—(1) Restoration method. The restoration method is a funding method that adapts the...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-31
...) an exemption from the minimum 30-minute rest break provision of the Agency's hours-of-service (HOS... minutes or more of ``attendance time'' to meet the HOS rest break requirements providing they do not perform any other work during the break. DATES: This exemption is effective from July 1, 2013 through June...
Code of Federal Regulations, 2010 CFR
2010-07-01
... to new work tasks as mobile equipment operators, drilling machine operators, haulage and conveyor... protective measures a miner can take against these hazards, and the contents of the mine's HazCom program... operation in the mine, which require new or different operating procedures. (4) Such other courses as may be...
How can my research paper be useful for future meta-analyses on forest restoration practices?
Enrique Andivia; Pedro Villar‑Salvador; Juan A. Oliet; Jaime Puertolas; R. Kasten Dumroese
2018-01-01
Statistical meta-analysis is a powerful and useful tool to quantitatively synthesize the information conveyed in published studies on a particular topic. It allows identifying and quantifying overall patterns and exploring causes of variation. The inclusion of published works in meta-analyses requires, however, a minimum quality standard of the reported data and...
Implementing direct, spatially isolated problems on transputer networks
NASA Technical Reports Server (NTRS)
Ellis, Graham K.
1988-01-01
Parametric studies were performed on transputer networks of up to 40 processors to determine how to implement and maximize the performance of the solution of problems where no processor-to-processor data transfer is required for the problem solution (spatially isolated). Two types of problems are investigated a computationally intensive problem where the solution required the transmission of 160 bytes of data through the parallel network, and a communication intensive example that required the transmission of 3 Mbytes of data through the network. This data consists of solutions being sent back to the host processor and not intermediate results for another processor to work on. Studies were performed on both integer and floating-point transputers. The latter features an on-chip floating-point math unit and offers approximately an order of magnitude performance increase over the integer transputer on real valued computations. The results indicate that a minimum amount of work is required on each node per communication to achieve high network speedups (efficiencies). The floating-point processor requires approximately an order of magnitude more work per communication than the integer processor because of the floating-point unit's increased computing capacity.
Einstein-Podolsky-Rosen paradox implies a minimum achievable temperature
NASA Astrophysics Data System (ADS)
Rogers, David M.
2017-01-01
This work examines the thermodynamic consequences of the repeated partial projection model for coupling a quantum system to an arbitrary series of environments under feedback control. This paper provides observational definitions of heat and work that can be realized in current laboratory setups. In contrast to other definitions, it uses only properties of the environment and the measurement outcomes, avoiding references to the "measurement" of the central system's state in any basis. These definitions are consistent with the usual laws of thermodynamics at all temperatures, while never requiring complete projective measurement of the entire system. It is shown that the back action of measurement must be counted as work rather than heat to satisfy the second law. Comparisons are made to quantum jump (unravelling) and transition-probability based definitions, many of which appear as particular limits of the present model. These limits show that our total entropy production is a lower bound on traditional definitions of heat that trace out the measurement device. Examining the master equation approximation to the process at finite measurement rates, we show that most interactions with the environment make the system unable to reach absolute zero. We give an explicit formula for the minimum temperature achievable in repeatedly measured quantum systems. The phenomenon of minimum temperature offers an explanation of recent experiments aimed at testing fluctuation theorems in the quantum realm and places a fundamental purity limit on quantum computers.
DOE Office of Scientific and Technical Information (OSTI.GOV)
Duke, Roger T.; Crump, Thomas Vu
The work was created to provide a tool for the purpose of improving the management of tasks associated with Agile projects. Agile projects are typically completed in an iterative manner with many short duration tasks being performed as part of iterations. These iterations are generally referred to as sprints. The objective of this work is to create a single tool that enables sprint teams to manage all of their tasks in multiple sprints and automatically produce all standard sprint performance charts with minimum effort. The format of the printed work is designed to mimic a standard Kanban board. The workmore » is developed as a single Excel file with worksheets capable of managing up to five concurrent sprints and up to one hundred tasks. It also includes a summary worksheet providing performance information from all active sprints. There are many commercial project management systems typically designed with features desired by larger organizations with many resources managing multiple programs and projects. The audience for this work is the small organizations and Agile project teams desiring an inexpensive, simple, user-friendly, task management tool. This work uses standard readily available software, Excel, requiring minimum data entry and automatically creating summary charts and performance data. It is formatted to print out and resemble standard flip charts and provide the visuals associated with this type of work.« less
NASA Technical Reports Server (NTRS)
Weber, W. J., III; Stanton, P. H.; Sumida, J. T.
1978-01-01
A bandwidth compressive modem making use of multi-amplitude minimum shift keying (MAMSK) has been designed and implemented in a laboratory environment at microwave frequencies. This system achieves a substantial bandwidth reduction over binary PSK and operates within 0.5 dB of theoretical performance. A number of easily implemented microwave transmitters have been designed to generate the required set of 16 signals. The receiver has been designed to work at 1 Mbit/s and contains the necessary phase tracking, AGC, and symbol synchronization loops as well as a lock detector, SNR estimator and provisions for differential decoding. This paper describes this entire system and presents the experimental results.
26 CFR 1.412(c)(1)-3T - Applying the minimum funding requirements to restored plans (temporary).
Code of Federal Regulations, 2013 CFR
2013-04-01
... 26 Internal Revenue 5 2013-04-01 2013-04-01 false Applying the minimum funding requirements to...-Sharing, Stock Bonus Plans, Etc. § 1.412(c)(1)-3T Applying the minimum funding requirements to restored plans (temporary). (a) In general—(1) Restoration method. The restoration method is a funding method...
Code of Federal Regulations, 2010 CFR
2010-04-01
... 26 Internal Revenue 5 2010-04-01 2010-04-01 false Required minimum distributions for defined...-Sharing, Stock Bonus Plans, Etc. § 1.401(a)(9)-6 Required minimum distributions for defined benefit plans and annuity contracts. Q-1. How must distributions under a defined benefit plan be paid in order to...
Scaling-up the minimum requirements analysis for big wilderness issues
David N. Cole
2007-01-01
The concept of applying a "minimum requirements" analysis to decisions about administrative actions in wilderness in the United States has been around for a long time. It comes from Section 4(c) of the Wilderness Act of 1964, which states that "except as necessary to meet minimum requirements for the administration of the area for the purposes of this...
Development of minimum state requirements for local growth management policies : phase 1.
DOT National Transportation Integrated Search
2015-01-01
This research entailed the development of minimum requirements for local growth management policies for use in Louisiana. The purpose of developing minimum statewide standards is to try to alleviate some of the stress placed on state and local govern...
Development of minimum state requirements for local growth management policies -- phase 1.
DOT National Transportation Integrated Search
2015-11-01
This research entailed the development of minimum requirements for local growth management policies for use : in Louisiana. The purpose of developing minimum statewide standards is to try to alleviate some of the stress : placed on state and local go...
Characterization of silicon-gate CMOS/SOS integrated circuits processed with ion implantation
NASA Technical Reports Server (NTRS)
Woo, D. S.
1982-01-01
The procedure used to generate MEBES masks and produce test wafers from the 10X Mann 1600 Pattern Generator Tape using existing CAD utility programs and the MEBES machine in the RCA Solid State Technology Center are described. The test vehicle used is the MSFC-designed SC102 Solar House Timing Circuit. When transforming the Mann 1600 tapes into MEBES tapes, extreme care is required in order to obtain accurate minimum linewidths when working with two different coding systems because the minimum grid sizes may be different for the two systems. The minimum grid sizes are 0.025 mil for MSFC Mann 1600 and 0.02 mil for MEBES. Some snapping to the next grid is therefore inevitable, and the results of this snapping effect are significant when submicron lines are present. However, no problem was noticed in the SC102 circuit because its minimum linewidth is 0.3 mil (7.6 microns). MEBES masks were fabricated and wafers were processed using the silicon-gate CMOS/SOS and aluminum-gate COS/MOS processing.
[Will inpatient care still be financeable? Effects of the minimum wage to operators].
Meyer, Dirk
2010-11-01
Due to demographic and social developments nursing service will continueto be a growth industry in the long run. The requirement for this is the political volition of a sufficient funding. A minimum wage in nursing service tends to increase prices of the offered services. Stated justifications for a minimum wage are wage dumping protection (inter alia against the background of the upcoming opening of the single market in 2011) as well as raising rivals' costs. Protection is focused on the 266,000 non-skilled workers in basic care owing to the strong tightening of the labour market for caregivers. Operative minimum wages will lead to adjustments by optimising operations, intensification of work, and rationalisation of workflow by increased employment of capital as well as technical substitution of relatively expensive non-skilled workers. In addition there will be increased pressure on prices for nursing services and private co-payments. There will be an increased supply and demand for illegal services. Suppliers who had been tied to collective contracts so far will achieve a relative advantage in competition.
47 CFR 87.89 - Minimum operator requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
....89 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Operating Requirements and Procedures Radio Operator Requirements § 87.89 Minimum operator requirements. (a) A station operator must hold a commercial radio operator license or permit...
47 CFR 87.89 - Minimum operator requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
....89 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Operating Requirements and Procedures Radio Operator Requirements § 87.89 Minimum operator requirements. (a) A station operator must hold a commercial radio operator license or permit...
47 CFR 87.89 - Minimum operator requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
....89 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Operating Requirements and Procedures Radio Operator Requirements § 87.89 Minimum operator requirements. (a) A station operator must hold a commercial radio operator license or permit...
47 CFR 87.89 - Minimum operator requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
....89 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Operating Requirements and Procedures Radio Operator Requirements § 87.89 Minimum operator requirements. (a) A station operator must hold a commercial radio operator license or permit...
47 CFR 87.89 - Minimum operator requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
....89 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) SAFETY AND SPECIAL RADIO SERVICES AVIATION SERVICES Operating Requirements and Procedures Radio Operator Requirements § 87.89 Minimum operator requirements. (a) A station operator must hold a commercial radio operator license or permit...
42 CFR 84.173 - Harnesses; installation and construction; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Harnesses; installation and construction; minimum... SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE... construction; minimum requirements. (a) Each respirator shall, where necessary, be equipped with a suitable...
42 CFR 84.133 - Harnesses; installation and construction; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Harnesses; installation and construction; minimum... SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Supplied-Air Respirators § 84.133 Harnesses; installation and construction; minimum requirements...
NASA Astrophysics Data System (ADS)
Chen, Ting; Van Den Broeke, Doug; Hsu, Stephen; Hsu, Michael; Park, Sangbong; Berger, Gabriel; Coskun, Tamer; de Vocht, Joep; Chen, Fung; Socha, Robert; Park, JungChul; Gronlund, Keith
2005-11-01
Illumination optimization, often combined with optical proximity corrections (OPC) to the mask, is becoming one of the critical components for a production-worthy lithography process for 55nm-node DRAM/Flash memory devices and beyond. At low-k1, e.g. k1<0.31, both resolution and imaging contrast can be severely limited by the current imaging tools while using the standard illumination sources. Illumination optimization is a process where the source shape is varied, in both profile and intensity distribution, to achieve enhancement in the final image contrast as compared to using the non-optimized sources. The optimization can be done efficiently for repetitive patterns such as DRAM/Flash memory cores. However, illumination optimization often produces source shapes that are "free-form" like and they can be too complex to be directly applicable for production and lack the necessary radial and annular symmetries desirable for the diffractive optical element (DOE) based illumination systems in today's leading lithography tools. As a result, post-optimization rendering and verification of the optimized source shape are often necessary to meet the production-ready or manufacturability requirements and ensure optimal performance gains. In this work, we describe our approach to the illumination optimization for k1<0.31 DRAM/Flash memory patterns, using an ASML XT:1400i at NA 0.93, where the all necessary manufacturability requirements are fully accounted for during the optimization. The imaging contrast in the resist is optimized in a reduced solution space constrained by the manufacturability requirements, which include minimum distance between poles, minimum opening pole angles, minimum ring width and minimum source filling factor in the sigma space. For additional performance gains, the intensity within the optimized source can vary in a gray-tone fashion (eight shades used in this work). Although this new optimization approach can sometimes produce closely spaced solutions as gauged by the NILS based metrics, we show that the optimal and production-ready source shape solution can be easily determined by comparing the best solutions to the "free-form" solution and more importantly, by their respective imaging fidelity and process latitude ranking. Imaging fidelity and process latitude simulations are performed to analyze the impact and sensitivity of the manufacturability requirements on pattern specific illumination optimizations using ASML XT:1400i and other latest imaging systems. Mask model based OPC (MOPC) is applied and optimized sequentially to ensure that the CD uniformity requirements are met.
Optimizing Teleportation Cost in Distributed Quantum Circuits
NASA Astrophysics Data System (ADS)
Zomorodi-Moghadam, Mariam; Houshmand, Mahboobeh; Houshmand, Monireh
2018-03-01
The presented work provides a procedure for optimizing the communication cost of a distributed quantum circuit (DQC) in terms of the number of qubit teleportations. Because of technology limitations which do not allow large quantum computers to work as a single processing element, distributed quantum computation is an appropriate solution to overcome this difficulty. Previous studies have applied ad-hoc solutions to distribute a quantum system for special cases and applications. In this study, a general approach is proposed to optimize the number of teleportations for a DQC consisting of two spatially separated and long-distance quantum subsystems. To this end, different configurations of locations for executing gates whose qubits are in distinct subsystems are considered and for each of these configurations, the proposed algorithm is run to find the minimum number of required teleportations. Finally, the configuration which leads to the minimum number of teleportations is reported. The proposed method can be used as an automated procedure to find the configuration with the optimal communication cost for the DQC. This cost can be used as a basic measure of the communication cost for future works in the distributed quantum circuits.
40 CFR 600.010-08 - Vehicle test requirements and minimum data requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... data requirements. 600.010-08 Section 600.010-08 Protection of Environment ENVIRONMENTAL PROTECTION... requirements and minimum data requirements. (a) Unless otherwise exempted from specific emission compliance... applicable): (1) The manufacturer shall generate FTP fuel economy data by testing according to the applicable...
WFIRST Project Science Activities
NASA Technical Reports Server (NTRS)
Gehrels, Neil
2012-01-01
The WFIRST Project is a joint effort between GSFC and JPL. The project scientists and engineers are working with the community Science Definition Team to define the requirements and initial design of the mission. The objective is to design an observatory that meets the WFIRST science goals of the Astr02010 Decadal Survey for minimum cost. This talk will be a report of recent project activities including requirements flowdown, detector array development, science simulations, mission costing and science outreach. Details of the interim mission design relevant to scientific capabilities will be presented.
Code of Federal Regulations, 2013 CFR
2013-10-01
... Tribal TANF Data Reports required under § 286.255 to determine if we will assess the penalty under § 286... Tribal TANF Grantee's quarterly reports (the TANF Data Report and the Tribal TANF Financial Report) must... validation by us. (1) For a disaggregated data report, “a complete and accurate report” means that: (i) The...
Code of Federal Regulations, 2011 CFR
2011-10-01
... Tribal TANF Data Reports required under § 286.255 to determine if we will assess the penalty under § 286... Tribal TANF Grantee's quarterly reports (the TANF Data Report and the Tribal TANF Financial Report) must... validation by us. (1) For a disaggregated data report, “a complete and accurate report” means that: (i) The...
Code of Federal Regulations, 2014 CFR
2014-10-01
... Tribal TANF Data Reports required under § 286.255 to determine if we will assess the penalty under § 286... Tribal TANF Grantee's quarterly reports (the TANF Data Report and the Tribal TANF Financial Report) must... validation by us. (1) For a disaggregated data report, “a complete and accurate report” means that: (i) The...
Code of Federal Regulations, 2010 CFR
2010-10-01
... Tribal TANF Data Reports required under § 286.255 to determine if we will assess the penalty under § 286... Tribal TANF Grantee's quarterly reports (the TANF Data Report and the Tribal TANF Financial Report) must... validation by us. (1) For a disaggregated data report, “a complete and accurate report” means that: (i) The...
ERIC Educational Resources Information Center
Dong, Nianbo; Maynard, Rebecca
2013-01-01
This paper and the accompanying tool are intended to complement existing supports for conducting power analysis tools by offering a tool based on the framework of Minimum Detectable Effect Sizes (MDES) formulae that can be used in determining sample size requirements and in estimating minimum detectable effect sizes for a range of individual- and…
NASA's Space Launch System: Systems Engineering Approach for Affordability and Mission Success
NASA Technical Reports Server (NTRS)
Hutt, John J.; Whitehead, Josh; Hanson, John
2017-01-01
NASA is working toward the first launch of the Space Launch System, a new, unmatched capability for deep space exploration with launch readiness planned for 2019. Since program start in 2011, SLS has passed several major formal design milestones, and every major element of the vehicle has produced test and flight hardware. The SLS approach to systems engineering has been key to the program's success. Key aspects of the SLS SE&I approach include: 1) minimizing the number of requirements, 2) elimination of explicit verification requirements, 3) use of certified models of subsystem capability in lieu of requirements when appropriate and 4) certification of capability beyond minimum required capability.
40 CFR 600.010-08 - Vehicle test requirements and minimum data requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
..., US06, SC03 and Cold temperature FTP data from each subconfiguration included within the model type. (2... data requirements. 600.010-08 Section 600.010-08 Protection of Environment ENVIRONMENTAL PROTECTION... Provisions § 600.010-08 Vehicle test requirements and minimum data requirements. (a) Unless otherwise...
40 CFR 600.010-86 - Vehicle test requirements and minimum data requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... additional model types established under § 600.207(a)(2), data from each subconfiguration included within the... data requirements. 600.010-86 Section 600.010-86 Protection of Environment ENVIRONMENTAL PROTECTION... requirements and minimum data requirements. (a) For each certification vehicle defined in this part, and for...
29 CFR 4043.25 - Failure to make required minimum funding payment.
Code of Federal Regulations, 2013 CFR
2013-07-01
... TERMINATIONS REPORTABLE EVENTS AND CERTAIN OTHER NOTIFICATION REQUIREMENTS Post-Event Notice of Reportable Events § 4043.25 Failure to make required minimum funding payment. (a) Reportable event. A reportable event occurs when a required installment or a payment required under section 302 of ERISA or section 412...
29 CFR 4043.25 - Failure to make required minimum funding payment.
Code of Federal Regulations, 2010 CFR
2010-07-01
... TERMINATIONS REPORTABLE EVENTS AND CERTAIN OTHER NOTIFICATION REQUIREMENTS Post-Event Notice of Reportable Events § 4043.25 Failure to make required minimum funding payment. (a) Reportable event. A reportable event occurs when a required installment or a payment required under section 302 of ERISA or section 412...
29 CFR 4043.25 - Failure to make required minimum funding payment.
Code of Federal Regulations, 2012 CFR
2012-07-01
... TERMINATIONS REPORTABLE EVENTS AND CERTAIN OTHER NOTIFICATION REQUIREMENTS Post-Event Notice of Reportable Events § 4043.25 Failure to make required minimum funding payment. (a) Reportable event. A reportable event occurs when a required installment or a payment required under section 302 of ERISA or section 412...
29 CFR 4043.25 - Failure to make required minimum funding payment.
Code of Federal Regulations, 2011 CFR
2011-07-01
... TERMINATIONS REPORTABLE EVENTS AND CERTAIN OTHER NOTIFICATION REQUIREMENTS Post-Event Notice of Reportable Events § 4043.25 Failure to make required minimum funding payment. (a) Reportable event. A reportable event occurs when a required installment or a payment required under section 302 of ERISA or section 412...
30 CFR 77.804 - High-voltage trailing cables; minimum design requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false High-voltage trailing cables; minimum design... OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.804 High-voltage trailing cables; minimum design requirements. (a) High-voltage trailing cables used in resistance grounded systems shall be...
30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...
30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...
27 CFR 19.184 - Scale tank minimum graduations.
Code of Federal Regulations, 2012 CFR
2012-04-01
... graduations. 19.184 Section 19.184 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Requirements Tank Requirements § 19.184 Scale tank minimum graduations. (a) The beams or dials on scale tanks used for tax determination must have minimum graduations not greater than the following: Quantity to be...
27 CFR 19.184 - Scale tank minimum graduations.
Code of Federal Regulations, 2013 CFR
2013-04-01
... graduations. 19.184 Section 19.184 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Requirements Tank Requirements § 19.184 Scale tank minimum graduations. (a) The beams or dials on scale tanks used for tax determination must have minimum graduations not greater than the following: Quantity to be...
27 CFR 19.184 - Scale tank minimum graduations.
Code of Federal Regulations, 2011 CFR
2011-04-01
... graduations. 19.184 Section 19.184 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Requirements Tank Requirements § 19.184 Scale tank minimum graduations. (a) The beams or dials on scale tanks used for tax determination must have minimum graduations not greater than the following: Quantity to be...
27 CFR 19.184 - Scale tank minimum graduations.
Code of Federal Regulations, 2014 CFR
2014-04-01
... graduations. 19.184 Section 19.184 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE... Requirements Tank Requirements § 19.184 Scale tank minimum graduations. (a) The beams or dials on scale tanks used for tax determination must have minimum graduations not greater than the following: Quantity to be...
30 CFR 77.804 - High-voltage trailing cables; minimum design requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false High-voltage trailing cables; minimum design... OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.804 High-voltage trailing cables; minimum design requirements. (a) High-voltage trailing cables used in resistance grounded systems shall be...
30 CFR 77.804 - High-voltage trailing cables; minimum design requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false High-voltage trailing cables; minimum design... OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.804 High-voltage trailing cables; minimum design requirements. (a) High-voltage trailing cables used in resistance grounded systems shall be...
30 CFR 77.804 - High-voltage trailing cables; minimum design requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false High-voltage trailing cables; minimum design... OF UNDERGROUND COAL MINES Surface High-Voltage Distribution § 77.804 High-voltage trailing cables; minimum design requirements. (a) High-voltage trailing cables used in resistance grounded systems shall be...
30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...
30 CFR 75.1107-9 - Dry chemical devices; capacity; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 30 Mineral Resources 1 2012-07-01 2012-07-01 false Dry chemical devices; capacity; minimum... Dry chemical devices; capacity; minimum requirements. (a) Dry chemical fire extinguishing systems used...; (3) Hose and pipe shall be as short as possible; the distance between the chemical container and...
Code of Federal Regulations, 2013 CFR
2013-04-01
... 17 Commodity and Securities Exchanges 1 2013-04-01 2013-04-01 false Self-regulatory organization... Miscellaneous § 1.52 Self-regulatory organization adoption and surveillance of minimum financial requirements. (a) Each self-regulatory organization must adopt rules prescribing minimum financial and related...
30 CFR 77.1707 - First aid equipment; location; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First aid equipment; location; minimum... OF UNDERGROUND COAL MINES Miscellaneous § 77.1707 First aid equipment; location; minimum requirements. (a) Each operator of a surface coal mine shall maintain a supply of the first aid equipment set forth...
10 CFR 440.16 - Minimum program requirements.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 10 Energy 3 2014-01-01 2014-01-01 false Minimum program requirements. 440.16 Section 440.16 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.16 Minimum...) Families with children; (4) High residential energy users; and (5) Households with a high energy burden. (c...
10 CFR 440.16 - Minimum program requirements.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 10 Energy 3 2012-01-01 2012-01-01 false Minimum program requirements. 440.16 Section 440.16 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.16 Minimum...) Families with children; (4) High residential energy users; and (5) Households with a high energy burden. (c...
10 CFR 440.16 - Minimum program requirements.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 10 Energy 3 2013-01-01 2013-01-01 false Minimum program requirements. 440.16 Section 440.16 Energy DEPARTMENT OF ENERGY ENERGY CONSERVATION WEATHERIZATION ASSISTANCE FOR LOW-INCOME PERSONS § 440.16 Minimum...) Families with children; (4) High residential energy users; and (5) Households with a high energy burden. (c...
Energy Requirements of Hydrogen-utilizing Microbes: A Boundary Condition for Subsurface Life
NASA Technical Reports Server (NTRS)
Hoehler, Tori M.; Alperin, Marc J.; Albert, Daniel B.; Martens, Christopher S.
2003-01-01
Microbial ecosystems based on the energy supplied by water-rock chemistry carry particular significance in the context of geo- and astrobiology. With no direct dependence on solar energy, lithotrophic microbes could conceivably penetrate a planetary crust to a depth limited only by temperature or pressure constraints (several kilometers or more). The deep lithospheric habitat is thereby potentially much greater in volume than its surface counterpart, and in addition offers a stable refuge against inhospitable surface conditions related to climatic or atmospheric evolution (e.g., Mars) or even high-energy impacts (e.g., early in Earth's history). The possibilities for a deep microbial biosphere are, however, greatly constrained by life s need to obtain energy at a certain minimum rate (the maintenance energy requirement) and of a certain minimum magnitude (the energy quantum requirement). The mere existence of these requirements implies that a significant fraction of the chemical free energy available in the subsurface environment cannot be exploited by life. Similar limits may also apply to the usefulness of light energy at very low intensities or long wavelengths. Quantification of these minimum energy requirements in terrestrial microbial ecosystems will help to establish a criterion of energetic habitability that can significantly constrain the prospects for life in Earth's subsurface, or on other bodies in the solar system. Our early work has focused on quantifying the biological energy quantum requirement for methanogenic archaea, as representatives of a plausible subsurface metabolism, in anoxic sediments (where energy availability is among the most limiting factors in microbial population growth). In both field and laboratory experiments utilizing these sediments, methanogens retain a remarkably consistent free energy intake, in the face of fluctuating environmental conditions that affect energy availability. The energy yields apparently required by methanogens in these sediment systems for sustained metabolism are about half that previously thought necessary. Lowered energy requirements would imply that a correspondingly greater proportion of the planetary subsurface could represent viable habitat for microorganisms.
Key Performance Parameter Driven Technology Goals for Electric Machines and Power Systems
NASA Technical Reports Server (NTRS)
Bowman, Cheryl; Jansen, Ralph; Brown, Gerald; Duffy, Kirsten; Trudell, Jeffrey
2015-01-01
Transitioning aviation to low carbon propulsion is one of the crucial strategic research thrust and is a driver in the search for alternative propulsion system for advanced aircraft configurations. This work requires multidisciplinary skills coming from multiple entities. The feasibility of scaling up various electric drive system technologies to meet the requirements of a large commercial transport is discussed in terms of key parameters. Functional requirements are identified that impact the power system design. A breakeven analysis is presented to find the minimum allowable electric drive specific power and efficiency that can preserve the range, initial weight, operating empty weight, and payload weight of the base aircraft.
33 CFR 67.05-20 - Minimum lighting requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...
33 CFR 67.05-20 - Minimum lighting requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...
33 CFR 67.05-20 - Minimum lighting requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...
33 CFR 67.05-20 - Minimum lighting requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...
33 CFR 67.05-20 - Minimum lighting requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... for Lights § 67.05-20 Minimum lighting requirements. The obstruction lighting requirements prescribed... application for authorization to establish more lights, or lights of greater intensity than required to be visible at the distances prescribed: Provided, That the prescribed characteristics of color and flash...
The minimum information about a genome sequence (MIGS) specification
Field, Dawn; Garrity, George; Gray, Tanya; Morrison, Norman; Selengut, Jeremy; Sterk, Peter; Tatusova, Tatiana; Thomson, Nicholas; Allen, Michael J; Angiuoli, Samuel V; Ashburner, Michael; Axelrod, Nelson; Baldauf, Sandra; Ballard, Stuart; Boore, Jeffrey; Cochrane, Guy; Cole, James; Dawyndt, Peter; De Vos, Paul; dePamphilis, Claude; Edwards, Robert; Faruque, Nadeem; Feldman, Robert; Gilbert, Jack; Gilna, Paul; Glöckner, Frank Oliver; Goldstein, Philip; Guralnick, Robert; Haft, Dan; Hancock, David; Hermjakob, Henning; Hertz-Fowler, Christiane; Hugenholtz, Phil; Joint, Ian; Kagan, Leonid; Kane, Matthew; Kennedy, Jessie; Kowalchuk, George; Kottmann, Renzo; Kolker, Eugene; Kravitz, Saul; Kyrpides, Nikos; Leebens-Mack, Jim; Lewis, Suzanna E; Li, Kelvin; Lister, Allyson L; Lord, Phillip; Maltsev, Natalia; Markowitz, Victor; Martiny, Jennifer; Methe, Barbara; Mizrachi, Ilene; Moxon, Richard; Nelson, Karen; Parkhill, Julian; Proctor, Lita; White, Owen; Sansone, Susanna-Assunta; Spiers, Andrew; Stevens, Robert; Swift, Paul; Taylor, Chris; Tateno, Yoshio; Tett, Adrian; Turner, Sarah; Ussery, David; Vaughan, Bob; Ward, Naomi; Whetzel, Trish; Gil, Ingio San; Wilson, Gareth; Wipat, Anil
2008-01-01
With the quantity of genomic data increasing at an exponential rate, it is imperative that these data be captured electronically, in a standard format. Standardization activities must proceed within the auspices of open-access and international working bodies. To tackle the issues surrounding the development of better descriptions of genomic investigations, we have formed the Genomic Standards Consortium (GSC). Here, we introduce the minimum information about a genome sequence (MIGS) specification with the intent of promoting participation in its development and discussing the resources that will be required to develop improved mechanisms of metadata capture and exchange. As part of its wider goals, the GSC also supports improving the ‘transparency’ of the information contained in existing genomic databases. PMID:18464787
The impact of maternity length-of-stay mandates on the labor market and insurance coverage.
Sabik, Lindsay M; Laugesen, Miriam J
2012-01-01
To understand the effects of insurance regulation on the labor market and insurance coverage, this study uses a difference-in-difference-in-differences analysis to compare five states that passed minimum maternity length-of-stay laws with states that waited until after a federal law was passed. On average, we do not find statistically significant effects on labor market outcomes such as hours of work and wages. However, we find that employees of small firms in states with maternity length-of-stay mandates experienced a 6.2-percentage-point decline in the likelihood of having employer-sponsored insurance. Implementation of federal health reform that requires minimum benefit standards should consider the implications for firms of differing sizes.
40 CFR 600.010-86 - Vehicle test requirements and minimum data requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... base level, and (iii) For additional model types established under § 600.207(a)(2), data from each... data requirements. 600.010-86 Section 600.010-86 Protection of Environment ENVIRONMENTAL PROTECTION... Provisions § 600.010-86 Vehicle test requirements and minimum data requirements. (a) For each certification...
Code of Federal Regulations, 2010 CFR
2010-04-01
... financial, cover and segregation requirements by leverage transaction merchants. 31.7 Section 31.7 Commodity... of minimum financial, cover and segregation requirements by leverage transaction merchants. (a) Each... required by § 31.8, or that the amount of leverage customer funds in segregation is less than is required...
Code of Federal Regulations, 2011 CFR
2011-04-01
... financial, cover and segregation requirements by leverage transaction merchants. 31.7 Section 31.7 Commodity... of minimum financial, cover and segregation requirements by leverage transaction merchants. (a) Each... required by § 31.8, or that the amount of leverage customer funds in segregation is less than is required...
Code of Federal Regulations, 2010 CFR
2010-04-01
... requirements to maintain minimum standards for Tribe/Consortium management systems? 1000.396 Section 1000.396... AGREEMENTS UNDER THE TRIBAL SELF-GOVERNMENT ACT AMENDMENTS TO THE INDIAN SELF-DETERMINATION AND EDUCATION ACT... minimum standards for Tribe/Consortium management systems? Yes, the Tribe/Consortium must maintain...
25 CFR 36.100 - Are there minimum requirements for student attendance checks?
Code of Federal Regulations, 2010 CFR
2010-04-01
... 25 Indians 1 2010-04-01 2010-04-01 false Are there minimum requirements for student attendance checks? 36.100 Section 36.100 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...
30 CFR 77.805 - Cable couplers and connection boxes; minimum design requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Cable couplers and connection boxes; minimum... connection boxes; minimum design requirements. (a)(1) Couplers that are used in medium- or high-voltage power... materials other than metal. (2) Cable couplers shall be adequate for the intended current and voltage. (3...
30 CFR 77.805 - Cable couplers and connection boxes; minimum design requirements.
Code of Federal Regulations, 2011 CFR
2011-07-01
... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Cable couplers and connection boxes; minimum... connection boxes; minimum design requirements. (a)(1) Couplers that are used in medium- or high-voltage power... materials other than metal. (2) Cable couplers shall be adequate for the intended current and voltage. (3...
25 CFR 36.100 - Are there minimum requirements for student attendance checks?
Code of Federal Regulations, 2012 CFR
2012-04-01
... 25 Indians 1 2012-04-01 2011-04-01 true Are there minimum requirements for student attendance checks? 36.100 Section 36.100 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...
25 CFR 36.100 - Are there minimum requirements for student attendance checks?
Code of Federal Regulations, 2011 CFR
2011-04-01
... 25 Indians 1 2011-04-01 2011-04-01 false Are there minimum requirements for student attendance checks? 36.100 Section 36.100 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...
25 CFR 36.100 - Are there minimum requirements for student attendance checks?
Code of Federal Regulations, 2013 CFR
2013-04-01
... 25 Indians 1 2013-04-01 2013-04-01 false Are there minimum requirements for student attendance checks? 36.100 Section 36.100 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...
25 CFR 36.100 - Are there minimum requirements for student attendance checks?
Code of Federal Regulations, 2014 CFR
2014-04-01
... 25 Indians 1 2014-04-01 2014-04-01 false Are there minimum requirements for student attendance checks? 36.100 Section 36.100 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR EDUCATION MINIMUM ACADEMIC STANDARDS FOR THE BASIC EDUCATION OF INDIAN CHILDREN AND NATIONAL CRITERIA FOR DORMITORY...
Federal Register 2010, 2011, 2012, 2013, 2014
2010-10-08
... LIBRARY OF CONGRESS Copyright Office 37 CFR Part 201 [Docket No. RM 2009-4] Minimum Balance... transactions per year; require deposit account holders to maintain a minimum balance in that account; mandate... against the balance instead of sending separate payments with applications and other requests for services...
30 CFR 75.1713-7 - First-aid equipment; location; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First-aid equipment; location; minimum... § 75.1713-7 First-aid equipment; location; minimum requirements. (a) Each operator of an underground coal mine shall maintain a supply of the first-aid equipment set forth in paragraph (b) of this § 75...
30 CFR 75.1713-6 - First-aid training program; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First-aid training program; minimum... § 75.1713-6 First-aid training program; minimum requirements. (a) All first-aid training programs... course of instruction similar to that outlined in “First Aid, A Bureau of Mines Instruction Manual.” (b...
Code of Federal Regulations, 2012 CFR
2012-10-01
... test; Type C supplied-air respirator, pressure-demand class; minimum requirements. (a) The static... 42 Public Health 1 2012-10-01 2012-10-01 false Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum requirements. 84.157 Section 84.157 Public Health PUBLIC HEALTH...
Code of Federal Regulations, 2013 CFR
2013-10-01
... test; Type C supplied-air respirator, pressure-demand class; minimum requirements. (a) The static... 42 Public Health 1 2013-10-01 2013-10-01 false Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum requirements. 84.157 Section 84.157 Public Health PUBLIC HEALTH...
Code of Federal Regulations, 2014 CFR
2014-10-01
... test; Type C supplied-air respirator, pressure-demand class; minimum requirements. (a) The static... 42 Public Health 1 2014-10-01 2014-10-01 false Airflow resistance test; Type C supplied-air respirator, pressure-demand class; minimum requirements. 84.157 Section 84.157 Public Health PUBLIC HEALTH...
Code of Federal Regulations, 2010 CFR
2010-10-01
... respirator, pressure-demand class; minimum requirements. 84.157 Section 84.157 Public Health PUBLIC HEALTH... test; Type C supplied-air respirator, pressure-demand class; minimum requirements. (a) The static... the facepiece shall not fall below atmospheric at inhalation airflows less than 115 liters (4 cubic...
Code of Federal Regulations, 2011 CFR
2011-10-01
... respirator, pressure-demand class; minimum requirements. 84.157 Section 84.157 Public Health PUBLIC HEALTH... test; Type C supplied-air respirator, pressure-demand class; minimum requirements. (a) The static... the facepiece shall not fall below atmospheric at inhalation airflows less than 115 liters (4 cubic...
14 CFR 171.257 - Minimum requirements for approval.
Code of Federal Regulations, 2010 CFR
2010-01-01
... System (ISMLS) § 171.257 Minimum requirements for approval. (a) The following are the minimum... operate and maintain the ISMLS facility in accordance with § 171.273. (4) The owner must agree to furnish periodic reports as set forth in § 171.275 and agree to allow the FAA to inspect the facility and its...
40 CFR 600.010 - Vehicle test requirements and minimum data requirements.
Code of Federal Regulations, 2012 CFR
2012-07-01
... 40 Protection of Environment 31 2012-07-01 2012-07-01 false Vehicle test requirements and minimum data requirements. 600.010 Section 600.010 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES General...
40 CFR 600.010 - Vehicle test requirements and minimum data requirements.
Code of Federal Regulations, 2013 CFR
2013-07-01
... 40 Protection of Environment 31 2013-07-01 2013-07-01 false Vehicle test requirements and minimum data requirements. 600.010 Section 600.010 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES General...
40 CFR 600.010 - Vehicle test requirements and minimum data requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 40 Protection of Environment 30 2014-07-01 2014-07-01 false Vehicle test requirements and minimum data requirements. 600.010 Section 600.010 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) ENERGY POLICY FUEL ECONOMY AND GREENHOUSE GAS EXHAUST EMISSIONS OF MOTOR VEHICLES General...
Haghdoost, AA; Momtazmanesh, N; Shoghi, F; Mohagheghi, M; Mehrolhassani, MH
2013-01-01
Background: In order to improve the quality of education in universities of medical sciences (UMS), and because of the key role of education development centers (EDCs), an accreditation scheme was developed to evaluate their performance. Method: A group of experts in the medical education field was selected based on pre-defined criteria by EDC of Ministry of Health and Medical education. The team, worked intensively for 6 months to develop a list of essential standards to assess the performance of EDCs. Having checked for the content validity of standards, clear and measurable indicators were created via consensus. Then, required information were collected from UMS EDCs; the first round of accreditation was carried out just to check the acceptability of this scheme, and make force universities to prepare themselves for the next factual round of accreditation. Results: Five standards domains were developed as the conceptual framework for defining main categories of indicators. This included: governing and leadership, educational planning, faculty development, assessment and examination and research in education. Nearly all of UMS filled all required data forms precisely with minimum confusion which shows the practicality of this accreditation scheme. Conclusion: It seems that the UMS have enough interest to provide required information for this accreditation scheme. However, in order to receive promising results, most of universities have to work intensively in order to prepare minimum levels in all required standards. However, it seems that in long term, implementation of a valid accreditation scheme plays an important role in improvement of the quality of medical education around the country. PMID:23865031
Haghdoost, Aa; Momtazmanesh, N; Shoghi, F; Mohagheghi, M; Mehrolhassani, Mh
2013-01-01
In order to improve the quality of education in universities of medical sciences (UMS), and because of the key role of education development centers (EDCs), an accreditation scheme was developed to evaluate their performance. A group of experts in the medical education field was selected based on pre-defined criteria by EDC of Ministry of Health and Medical education. The team, worked intensively for 6 months to develop a list of essential standards to assess the performance of EDCs. Having checked for the content validity of standards, clear and measurable indicators were created via consensus. Then, required information were collected from UMS EDCs; the first round of accreditation was carried out just to check the acceptability of this scheme, and make force universities to prepare themselves for the next factual round of accreditation. Five standards domains were developed as the conceptual framework for defining main categories of indicators. This included: governing and leadership, educational planning, faculty development, assessment and examination and research in education. Nearly all of UMS filled all required data forms precisely with minimum confusion which shows the practicality of this accreditation scheme. It seems that the UMS have enough interest to provide required information for this accreditation scheme. However, in order to receive promising results, most of universities have to work intensively in order to prepare minimum levels in all required standards. However, it seems that in long term, implementation of a valid accreditation scheme plays an important role in improvement of the quality of medical education around the country.
Globally optimal, minimum stored energy, double-doughnut superconducting magnets.
Tieng, Quang M; Vegh, Viktor; Brereton, Ian M
2010-01-01
The use of the minimum stored energy current density map-based methodology of designing closed-bore symmetric superconducting magnets was described recently. The technique is further developed to cater for the design of interventional-type MRI systems, and in particular open symmetric magnets of the double-doughnut configuration. This extends the work to multiple magnet domain configurations. The use of double-doughnut magnets in MRI scanners has previously been hindered by the ability to deliver strong magnetic fields over a sufficiently large volume appropriate for imaging, essentially limiting spatial resolution, signal-to-noise ratio, and field of view. The requirement of dedicated interventional space restricts the manner in which the coils can be arranged and placed. The minimum stored energy optimal coil arrangement ensures that the field strength is maximized over a specific region of imaging. The design method yields open, dual-domain magnets capable of delivering greater field strengths than those used prior to this work, and at the same time it provides an increase in the field-of-view volume. Simulation results are provided for 1-T double-doughnut magnets with at least a 50-cm 1-ppm (parts per million) field of view and 0.7-m gap between the two doughnuts. Copyright (c) 2009 Wiley-Liss, Inc.
NASA Astrophysics Data System (ADS)
Kim, Seunggyu; Lee, Seokhun; Jeon, Jessie S.
2017-11-01
To determine the most effective antimicrobial treatments of infectious pathogen, high-throughput antibiotic susceptibility test (AST) is critically required. However, the conventional AST requires at least 16 hours to reach the minimum observable population. Therefore, we developed a microfluidic system that allows maintenance of linear antibiotic concentration and measurement of local bacterial density. Based on the Stokes-Einstein equation, the flow rate in the microchannel was optimized so that linearization was achieved within 10 minutes, taking into account the diffusion coefficient of each antibiotic in the agar gel. As a result, the minimum inhibitory concentration (MIC) of each antibiotic against P. aeruginosa could be immediately determined 6 hours after treatment of the linear antibiotic concentration. In conclusion, our system proved the efficacy of a high-throughput AST platform through MIC comparison with Clinical and Laboratory Standards Institute (CLSI) range of antibiotics. This work was supported by the Climate Change Research Hub (Grant No. N11170060) of the KAIST and by the Brain Korea 21 Plus project.
Zhou, Ping-Ping; Meng, Jiao; Bao, Jie
2017-01-01
The aim of this work is to study the citric acid fermentation by a robust strain Aspergillus niger SIIM M288 using corn stover feedstock after dry dilute sulfuric acid pretreatment and biodetoxification. Citric acid at 100.04g/L with the yield of 94.11% was obtained, which are comparable to the starch or sucrose based citric acid fermentation. No free wastewater was generated in the overall process from the pretreatment to citric acid fermentation. Abundant divalent metal ions as well as high titer of potassium, phosphate, and nitrogen were found in corn stover hydrolysate. Further addition of extra nutrients showed no impact on increasing citric acid formation except minimum nitrogen source was required. Various fermentation parameters were tested and only minimum regulation was required during the fermentation. This study provided a biorefining process for citric acid fermentation from lignocellulose feedstock with the maximum citric acid titer and yield. Copyright © 2016 Elsevier Ltd. All rights reserved.
Accepting Lower Salaries for Meaningful Work
Hu, Jing; Hirsh, Jacob B.
2017-01-01
A growing literature indicates that people are increasingly motivated to experience a sense of meaning in their work lives. Little is known, however, about how perceptions of work meaningfulness influence job choice decisions. Although much of the research on job choice has focused on the importance of financial compensation, the subjective meanings attached to a job should also play a role. The current set of studies explored the hypothesis that people are willing to accept lower salaries for more meaningful work. In Study 1, participants reported lower minimum acceptable salaries when comparing jobs that they considered to be personally meaningful with those that they considered to be meaningless. In Study 2, an experimental enhancement of a job’s apparent meaningfulness lowered the minimum acceptable salary that participants required for the position. In two large-scale cross-national samples of full-time employees in 2005 and 2015, Study 3 found that participants who experienced more meaningful work lives were more likely to turn down higher-paying job offers elsewhere. The strength of this effect also increased significantly over this time period. Study 4 replicated these findings in an online sample, such that participants who reported having more meaningful work were less willing to leave their current jobs and organizations for higher paying opportunities. These patterns of results remained significant when controlling for demographic factors and differences in job characteristics. PMID:29085310
Federal Register 2010, 2011, 2012, 2013, 2014
2013-01-14
... require hybrid and electric passenger cars, light trucks, medium and heavy duty trucks and buses, low... Sound Requirements for Hybrid and Electric Vehicles AGENCY: National Highway Traffic Safety... minimum sound requirements for hybrid and electric vehicles. DATES: Comments must be received on or before...
ERIC Educational Resources Information Center
Schudde, Lauren; Scott-Clayton, Judith
2014-01-01
The Federal Pell Grant Program is the nation's largest need-based grant program. While students' initial eligibility for the Pell is based on financial need, renewal of the award is contingent on their making satisfactory academic progress (SAP)--meeting minimum academic standards similar to those proposed in models of performance-based…
Numerical Solutions for a Cylindrical Laser Diffuser Flowfield
1990-06-01
exhaust conditions with minimum losses to optimize performance of the system. Thus, the handling of the system of shock waves to decelerate the flow...requirement for exhaustive experimental work will result in significant savings of both time and resources. As more advanced computers are developed, the...Mach number (ɚ.5) flows. Recent interest in hypersonic engine inlet performance has resulted in an extension of the methodology to high Mach number
An Analysis of Minimum System Requirements to Support Computerized Adaptive Testing.
1986-09-01
adaptive test ( CAT ); adaptive test ing A;4SRAC:’ (Continue on reverie of necessary and ident4f by block number) % This pape-r discusses the minimum system...requirements needed to develop a computerized adaptive test ( CAT ). It lists some of the benefits of adaptive testing, establishes a set of...discusses the minimum system requirements needed to develop a computerized adaptive test ( CAT ). It lists some of the benefits of adaptive testing
Yaslioglu, Erkan; Simsek, Ercan; Kilic, Ilker
2007-04-15
In the study, 10 different dairy cattle barns with natural ventilation system were investigated in terms of structural aspects. VENTGRAPH software package was used to estimate minimum ventilation requirements for three different outdoor design temperatures (-3, 0 and 1.7 degrees C). Variation in indoor temperatures was also determined according to the above-mentioned conditions. In the investigated dairy cattle barns, on condition that minimum ventilation requirement to be achieved for -3, 0 and 1.7 degrees C outdoor design temperature and 70, 80% Indoor Relative Humidity (IRH), estimated indoor temperature were ranged from 2.2 to 12.2 degrees C for 70% IRH, 4.3 to 15.0 degrees C for 80% IRH. Barn type, outdoor design temperature and indoor relative humidity significantly (p < 0.01) affect the indoor temperature. The highest ventilation requirement was calculated for straw yard (13879 m3 h(-1)) while the lowest was estimated for tie-stall (6169.20 m3 h(-1)). Estimated minimum ventilation requirements per animal were significantly (p < 0.01) different according to the barn types. Effect of outdoor esign temperatures on minimum ventilation requirements and minimum ventilation requirements per animal was found to be significant (p < 0.05, p < 0.01). Estimated indoor temperatures were in thermoneutral zone (-2 to 20 degrees C). Therefore, one can be said that use of naturally ventilated cold dairy barns in the region will not lead to problems associated with animal comfort in winter.
Commentary: legal minimum tread depth for passenger car tires in the U.S.A.--a survey.
Blythe, William; Seguin, Debra E
2006-06-01
Available tire traction is a significant highway safety issue, particularly on wet roads. Tire-roadway friction on dry, clean roads is essentially independent of tread depth, and depends primarily on roadway surface texture. However, tire-wet-roadway friction, both for longitudinal braking and lateral cornering forces, depends on several variables, most importantly on water depth, speed and tire tread depth, and the roadway surface texture. The car owner-operator has control over speed and tire condition, but not on water depth or road surface texture. Minimum tire tread depth is legislated throughout most of the United States and Europe. Speed reduction for wet road conditions is not.A survey of state requirements for legal minimum tread depth for passenger vehicle tires in the United States is presented. Most states require a minimum of 2/32 of an inch (approximately 1.6 mm) of tread, but two require less, some have no requirements, and some defer to the federal criterion for commercial vehicle safety inspections. The requirement of 2/32 of an inch is consistent with the height of the tread-wear bars built in to passenger car tires sold in the United States, but the rationale for that requirement, or other existing requirements, is not clear. Recent research indicates that a minimum tread depth of 2/32 of an inch does not prevent significant loss of friction at highway speeds, even for minimally wet roadways. The research suggests that tires with less than 4/32 of an inch tread depth may lose approximately 50 percent of available friction in those circumstances, even before hydroplaning occurs. It is concluded that the present requirements for minimum passenger car tire tread depth are not based upon rational safety considerations, and that an increase in the minimum tread depth requirements would have a beneficial effect on highway safety.
Federal Register 2010, 2011, 2012, 2013, 2014
2012-06-07
... context of the proposed rule's minimum penalty requirements. Two commenters stated that the law is clear... appeal process without being able to appeal the decisions to the Secretary or a court of law. As... court of law, which is why, the commenters stated, the USDA has proposed the minimum penalties to be...
75 FR 18256 - Petition for Exemption; Summary of Petition Received
Federal Register 2010, 2011, 2012, 2013, 2014
2010-04-09
... an exemption from the specific dimensions of the passenger entry door of the Hawker Beechcraft Model 390-2. The door has basic dimensions greater than the minimum required by Sec. 23.783(f)(1). The total... than the minimum area required by Sec. 23.783(f)(1); however, the minimum width dimension cannot be met...
30 CFR 75.1103-3 - Automatic fire sensor and warning device systems; minimum requirements; general.
Code of Federal Regulations, 2014 CFR
2014-07-01
... 30 Mineral Resources 1 2014-07-01 2014-07-01 false Automatic fire sensor and warning device systems; minimum requirements; general. 75.1103-3 Section 75.1103-3 Mineral Resources MINE SAFETY AND...-UNDERGROUND COAL MINES Fire Protection § 75.1103-3 Automatic fire sensor and warning device systems; minimum...
34 CFR 99.22 - What minimum requirements exist for the conduct of a hearing?
Code of Federal Regulations, 2010 CFR
2010-07-01
... 34 Education 1 2010-07-01 2010-07-01 false What minimum requirements exist for the conduct of a hearing? 99.22 Section 99.22 Education Office of the Secretary, Department of Education FAMILY EDUCATIONAL RIGHTS AND PRIVACY What Are the Procedures for Amending Education Records? § 99.22 What minimum...
42 CFR 52b.12 - What are the minimum requirements of construction and equipment?
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 1 2011-10-01 2011-10-01 false What are the minimum requirements of construction and equipment? 52b.12 Section 52b.12 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GRANTS NATIONAL INSTITUTES OF HEALTH CONSTRUCTION GRANTS § 52b.12 What are the minimum...
Adaptive feedforward control of non-minimum phase structural systems
NASA Astrophysics Data System (ADS)
Vipperman, J. S.; Burdisso, R. A.
1995-06-01
Adaptive feedforward control algorithms have been effectively applied to stationary disturbance rejection. For structural systems, the ideal feedforward compensator is a recursive filter which is a function of the transfer functions between the disturbance and control inputs and the error sensor output. Unfortunately, most control configurations result in a non-minimum phase control path; even a collocated control actuator and error sensor will not necessarily produce a minimum phase control path in the discrete domain. Therefore, the common practice is to choose a suitable approximation of the ideal compensator. In particular, all-zero finite impulse response (FIR) filters are desirable because of their inherent stability for adaptive control approaches. However, for highly resonant systems, large order filters are required for broadband applications. In this work, a control configuration is investigated for controlling non-minimum phase lightly damped structural systems. The control approach uses low order FIR filters as feedforward compensators in a configuration that has one more control actuator than error sensors. The performance of the controller was experimentally evaluated on a simply supported plate under white noise excitation for a two-input, one-output (2I1O) system. The results show excellent error signal reduction, attesting to the effectiveness of the method.
42 CFR 84.174 - Respirator containers; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... Air-Purifying Particulate Respirators § 84.174 Respirator containers; minimum requirements. (a) Except... contamination of respirators which are not removed, and to prevent damage to respirators during transit. ...
Rosenow, Felix; Bast, Thomas; Czech, Thomas; Feucht, Martha; Hans, Volkmar H; Helmstaedter, Christoph; Huppertz, Hans-Jürgen; Noachtar, Soheyl; Oltmanns, Frank; Polster, Tilman; Seeck, Margitta; Trinka, Eugen; Wagner, Kathrin; Strzelczyk, Adam
2016-08-01
The definition of minimal standards remains pivotal as a basis for a high standard of care and as a basis for staff allocation or reimbursement. Only limited publications are available regarding the required staffing or methodologic expertise in epilepsy centers. The executive board of the working group (WG) on presurgical epilepsy diagnosis and operative epilepsy treatment published the first guidelines in 2000 for Austria, Germany, and Switzerland. In 2014, revised guidelines were published and the WG decided to publish an unaltered English translation in this report. Because epilepsy surgery is an elective procedure, quality standards are particularly high. As detailed in the first edition of these guidelines, quality control relates to seven different domains: (1) establishing centers with a sufficient number of sufficiently and specifically trained personnel, (2) minimum technical standards and equipment, (3) continuous medical education of employees, (4) surveillance by trained personnel during video electroencephalography (EEG) monitoring (VEM), (5) systematic acquisition of clinical and outcome data, (6) the minimum number of preoperative evaluations and epilepsy surgery procedures, and (7) the cooperation of epilepsy centers. These standards required the certification of the different professions involved and minimum numbers of procedures. In the subsequent decade, quite a number of colleagues were certified by the trinational WG; therefore, the executive board of the WG decided in 2013 to make these standards obligatory. This revised version is particularly relevant given that the German procedure classification explicitly refers to the guidelines of the WG with regard to noninvasive/invasive preoperative video-EEG monitoring and invasive intraoperative diagnostics in epilepsy. Wiley Periodicals, Inc. © 2016 International League Against Epilepsy.
Evaluation of a LiF:Mg,Ti thermoluminescent ring dosimeter according to the IEC 62387:2012 Standards
NASA Astrophysics Data System (ADS)
Oliveira, Edyelle L. B.; de Barros, Vinícius S. M.; Asfora, Viviane K.; Khoury, Helen J.
2018-03-01
This work shows results of type testing of a ring radiation dosimeter system under IEC 62387:2012. The personal dosimeter investigated in this work consists of a commercial one element plastic ring which contains an LiF:Mg,Ti thermoluminescent pellet. By applying requirements for statistical fluctuations and linearity, a minimum measurable dose in Hp(0.07) was established. Energy and angular dependence aided in determining energy correction factors and fading requirements were used to select the most appropriate preheat scheme. Type testing of passive radiation monitors was performed in the Radiation Metrology Laboratory (LMRI-DEN/UFPE) of the Federal University of Pernambuco and is a major step in Brazil for the independent evaluation of these dosimeters, currently not available in the country.
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 933.784 Section 933.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 939.784 Section 939.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 941.784 Section 941.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 921.784 Section 921.784 Mineral Resources OFFICE OF SURFACE... requirements for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...
DOE Office of Scientific and Technical Information (OSTI.GOV)
Keating, T. J.; Walker, A.; Ardani, K.
2015-03-01
This PV O&M Best Practices Guide is designed to improve solar asset transparency for investors and rating agencies, provide an industry framework for quality management, and reduce transaction costs in the solar asset securitization process. The PV O&M Best Practices Guide is intended to outline the minimum requirements for third-party ownership providers (“Providers”). Adherence to the guide is voluntary. Providers that adhere to the guide are responsible for selfcertifying that they have fulfilled the guide requirements.
7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.
Code of Federal Regulations, 2014 CFR
2014-01-01
... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...
7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.
Code of Federal Regulations, 2010 CFR
2010-01-01
... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...
7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.
Code of Federal Regulations, 2012 CFR
2012-01-01
... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...
7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.
Code of Federal Regulations, 2013 CFR
2013-01-01
... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...
7 CFR 1788.11 - Minimum insurance requirements for contractors, engineers, and architects.
Code of Federal Regulations, 2011 CFR
2011-01-01
... REQUIREMENTS FOR ELECTRIC AND TELECOMMUNICATIONS BORROWERS Insurance for Contractors, Engineers, and Architects, Electric Borrowers § 1788.11 Minimum insurance requirements for contractors, engineers, and architects. (a..., engineers, and architects. 1788.11 Section 1788.11 Agriculture Regulations of the Department of Agriculture...
14 CFR 25.149 - Minimum control speed.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Minimum control speed. 25.149 Section 25... Minimum control speed. (a) In establishing the minimum control speeds required by this section, the method... prevent a heading change of more than 20 degrees. (e) VMCG, the minimum control speed on the ground, is...
14 CFR 25.149 - Minimum control speed.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Minimum control speed. 25.149 Section 25... Minimum control speed. (a) In establishing the minimum control speeds required by this section, the method... prevent a heading change of more than 20 degrees. (e) VMCG, the minimum control speed on the ground, is...
A national curriculum for ophthalmology residency training
Grover, Ashok Kumar; Honavar, Santosh G; Azad, Rajvardhan; Verma, Lalit
2018-01-01
We present a residency curriculum for Ophthalmology in India. The document derives from a workshop by the All India Ophthalmological Society (AlOS) which adapted the International Council of Ophthalmology residency curriculum and refined and customized it based on inputs by the residency program directors who participated in the work shop. The curriculum describes the course content, lays down the minimum requirements of infrastructure and mandates diagnostic and therapeutic procedures required for optimal training. It emphasises professionalism, management, research methodology, community ophthalmology as integral to the curriculum. The proposed national ophthalmology residency curriculum for India incorporates the required knowledge and skills for effective and safe practice of ophthalmology and takes into account the specific needs of the country. PMID:29785982
Jatobá, Alessandro; de Carvalho, Paulo Victor R; da Cunha, Amauri Marques
2012-01-01
Work in organizations requires a minimum level of consensus on the understanding of the practices performed. To adopt technological devices to support the activities in environments where work is complex, characterized by the interdependence among a large number of variables, understanding about how work is done not only takes an even greater importance, but also becomes a more difficult task. Therefore, this study aims to present a method for modeling of work in complex systems, which allows improving the knowledge about the way activities are performed where these activities do not simply happen by performing procedures. Uniting techniques of Cognitive Task Analysis with the concept of Work Process, this work seeks to provide a method capable of providing a detailed and accurate vision of how people perform their tasks, in order to apply information systems for supporting work in organizations.
12 CFR 324.10 - Minimum capital requirements.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 12 Banks and Banking 5 2014-01-01 2014-01-01 false Minimum capital requirements. 324.10 Section 324.10 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND STATEMENTS OF GENERAL POLICY CAPITAL ADEQUACY OF FDIC-SUPERVISED INSTITUTIONS Capital Ratio Requirements and Buffers § 324.10...
7 CFR 35.11 - Minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-01-01
... species table grapes unless such grapes meet the following quality and container marking requirements..., Europe, Greenland, Canada, or Mexico, shall meet each applicable minimum requirement of the U.S. No. 1... 5 pounds or less in master containers, to any destination other than in Canada or Mexico shall be...
47 CFR 101.143 - Minimum path length requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...
47 CFR 101.143 - Minimum path length requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...
47 CFR 101.143 - Minimum path length requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...
47 CFR 101.143 - Minimum path length requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...
47 CFR 101.143 - Minimum path length requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... SERVICES FIXED MICROWAVE SERVICES Technical Standards § 101.143 Minimum path length requirements. (a) The... carrier fixed point-to-point microwave services must equal or exceed the value set forth in the table...
Speedup of minimum discontinuity phase unwrapping algorithm with a reference phase distribution
NASA Astrophysics Data System (ADS)
Liu, Yihang; Han, Yu; Li, Fengjiao; Zhang, Qican
2018-06-01
In three-dimensional (3D) shape measurement based on phase analysis, the phase analysis process usually produces a wrapped phase map ranging from - π to π with some 2 π discontinuities, and thus a phase unwrapping algorithm is necessary to recover the continuous and nature phase map from which 3D height distribution can be restored. Usually, the minimum discontinuity phase unwrapping algorithm can be used to solve many different kinds of phase unwrapping problems, but its main drawback is that it requires a large amount of computations and has low efficiency in searching for the improving loop within the phase's discontinuity area. To overcome this drawback, an improvement to speedup of the minimum discontinuity phase unwrapping algorithm by using the phase distribution on reference plane is proposed. In this improved algorithm, before the minimum discontinuity phase unwrapping algorithm is carried out to unwrap phase, an integer number K was calculated from the ratio of the wrapped phase to the nature phase on a reference plane. And then the jump counts of the unwrapped phase can be reduced by adding 2K π, so the efficiency of the minimum discontinuity phase unwrapping algorithm is significantly improved. Both simulated and experimental data results verify the feasibility of the proposed improved algorithm, and both of them clearly show that the algorithm works very well and has high efficiency.
77 FR 76979 - Pesticides; Revisions to Minimum Risk Exemption
Federal Register 2010, 2011, 2012, 2013, 2014
2012-12-31
...EPA is proposing to more clearly describe the active and inert ingredients permitted in products eligible for the exemption from regulation for minimum risk pesticides. EPA is proposing to reorganize these lists with a focus on clarity and transparency by adding specific chemical identifiers. The identifiers would make it clearer to manufacturers; the public; and Federal, state, and tribal inspectors which ingredients are permitted in minimum risk pesticide products. EPA is also proposing to modify the label requirements in the exemption to require the use of specific common chemical names in lists of ingredients on minimum risk pesticide product labels, and to require producer contact information on the label. Once final, these proposed changes would maintain the availability of minimum risk pesticide products while providing more consistent information for consumers, clearer regulations for producers, and easier identification by states, tribes and EPA as to whether a product is in compliance with the exemption.
77 FR 8896 - Notice of Proposed Information Collection for 1029-0036
Federal Register 2010, 2011, 2012, 2013, 2014
2012-02-15
... request for Surface Mining Permit Applications--Minimum Requirements for Reclamation and Operation Plan... Permit Applications-- Minimum Requirements for Reclamation and Operation Plan. OSM is requesting a 3-year... Requirements for Reclamation and Operation Plan. OMB Control Number: 1029-0036. SUMMARY: Sections 507(b), 508(a...
29 CFR 780.300 - Statutory exemptions in section 13(a)(6).
Code of Federal Regulations, 2010 CFR
2010-07-01
... Employment in Agriculture That Is Exempted From the Minimum Wage and Overtime Pay Requirements Under Section... the Act exempts from the minimum wage requirements of section 6 and from the overtime pay requirements... 780.300 Labor Regulations Relating to Labor (Continued) WAGE AND HOUR DIVISION, DEPARTMENT OF LABOR...
ERIC Educational Resources Information Center
Brandon, Peter D.
The potential effects of raising the minimum wage on the earnings of mothers moving from welfare to work were examined by analyzing the differences that existed in the late 1980s in the various states' minimum wage rates and data from three waves of the Survey of Income and Program Participation for the years 1985-1990 (during which time 13 states…
Code of Federal Regulations, 2011 CFR
2011-10-01
... HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF... supplied-air respirators; minimum requirements. (a) Blowers or connections to air supplies providing...
2014-11-26
This document contains final regulations relating to the requirement to maintain minimum essential coverage enacted by the Patient Protection and Affordable Care Act and the Health Care and Education Reconciliation Act of 2010, as amended by the TRICARE Affirmation Act and Public Law 111-173 (collectively, the Affordable Care Act). These final regulations provide individual taxpayers with guidance under section 5000A of the Internal Revenue Code on the requirement to maintain minimum essential coverage and rules governing certain types of exemptions from that requirement.
ERIC Educational Resources Information Center
Conforti, Peter A.
2013-01-01
This paper compares the minimum requirements for high school graduation in each state with admission requirements for the state's main (or "flagship") university campus. In 80% of the states, the high school graduation requirements do not meet the minimum standards necessary for admission to their own state universities.
Zhou, L; Goodman, G; Martikainen, A
2013-01-01
Continuous airflow monitoring can improve the safety of the underground work force by ensuring the uninterrupted and controlled distribution of mine ventilation to all working areas. Air velocity measurements vary significantly and can change rapidly depending on the exact measurement location and, in particular, due to the presence of obstructions in the air stream. Air velocity must be measured at locations away from obstructions to avoid the vortices and eddies that can produce inaccurate readings. Further, an uninterrupted measurement path cannot always be guaranteed when using continuous airflow monitors due to the presence of nearby equipment, personnel, roof falls and rib rolls. Effective use of these devices requires selection of a minimum distance from an obstacle, such that an air velocity measurement can be made but not affected by the presence of that obstacle. This paper investigates the impacts of an obstruction on the behavior of downstream airflow using a numerical CFD model calibrated with experimental test results from underground testing. Factors including entry size, obstruction size and the inlet or incident velocity are examined for their effects on the distributions of airflow around an obstruction. A relationship is developed between the minimum measurement distance and the hydraulic diameters of the entry and the obstruction. A final analysis considers the impacts of continuous monitor location on the accuracy of velocity measurements and on the application of minimum measurement distance guidelines.
Zhou, L.; Goodman, G.; Martikainen, A.
2015-01-01
Continuous airflow monitoring can improve the safety of the underground work force by ensuring the uninterrupted and controlled distribution of mine ventilation to all working areas. Air velocity measurements vary significantly and can change rapidly depending on the exact measurement location and, in particular, due to the presence of obstructions in the air stream. Air velocity must be measured at locations away from obstructions to avoid the vortices and eddies that can produce inaccurate readings. Further, an uninterrupted measurement path cannot always be guaranteed when using continuous airflow monitors due to the presence of nearby equipment, personnel, roof falls and rib rolls. Effective use of these devices requires selection of a minimum distance from an obstacle, such that an air velocity measurement can be made but not affected by the presence of that obstacle. This paper investigates the impacts of an obstruction on the behavior of downstream airflow using a numerical CFD model calibrated with experimental test results from underground testing. Factors including entry size, obstruction size and the inlet or incident velocity are examined for their effects on the distributions of airflow around an obstruction. A relationship is developed between the minimum measurement distance and the hydraulic diameters of the entry and the obstruction. A final analysis considers the impacts of continuous monitor location on the accuracy of velocity measurements and on the application of minimum measurement distance guidelines. PMID:26388684
DOE Office of Scientific and Technical Information (OSTI.GOV)
West, W. Geoffrey; Gray, David Clinton
Purpose: To introduce the Joint Commission's requirements for annual diagnostic physics testing of all nuclear medicine equipment, effective 7/1/2014, and to highlight an acceptable methodology for testing lowcontrast resolution of the nuclear medicine imaging system. Methods: The Joint Commission's required diagnostic physics evaluations are to be conducted for all of the image types produced clinically by each scanner. Other accrediting bodies, such as the ACR and the IAC, have similar imaging metrics, but do not emphasize testing low-contrast resolution as it relates clinically. The proposed method for testing low contrast resolution introduces quantitative metrics that are clinically relevant. The acquisitionmore » protocol and calculation of contrast levels will utilize a modified version of the protocol defined in AAPM Report #52. Results: Using the Rose criterion for lesion detection with a SNRpixel = 4.335 and a CNRlesion = 4, the minimum contrast levels for 25.4 mm and 31.8 mm cold spheres were calculated to be 0.317 and 0.283, respectively. These contrast levels are the minimum threshold that must be attained to guard against false positive lesion detection. Conclusion: Low contrast resolution, or detectability, can be properly tested in a manner that is clinically relevant by measuring the contrast level of cold spheres within a Jaszczak phantom using pixel values within ROI's placed in the background and cold sphere regions. The measured contrast levels are then compared to a minimum threshold calculated using the Rose criterion and a CNRlesion = 4. The measured contrast levels must either meet or exceed this minimum threshold to prove acceptable lesion detectability. This research and development activity was performed by the authors while employed at West Physics Consulting, LLC. It is presented with the consent of West Physics, which has authorized the dissemination of the information and/or techniques described in the work.« less
Schrock, John B; Kraeutler, Matthew J; Dayton, Michael R; McCarty, Eric C
2017-06-01
The purpose of this study was to analyze how program directors (PDs) of orthopaedic surgery residency programs use United States Medical Licensing Examination (USMLE) Step 1 and 2 scores in screening residency applicants. A survey was sent to each allopathic orthopaedic surgery residency PD. PDs were asked if they currently use minimum Step 1 and/or 2 scores in screening residency applicants and if these criteria have changed in recent years. Responses were received from 113 of 151 PDs (75%). One program did not have the requested information and five declined participation, leaving 107 responses analyzed. Eighty-nine programs used a minimum USMLE Step 1 score (83%). Eighty-three programs (78%) required a Step 1 score ≥210, 80 (75%) required a score ≥220, 57 (53%) required a score ≥230, and 22 (21%) required a score ≥240. Multiple PDs mentioned the high volume of applications as a reason for using a minimum score and for increasing the minimum score in recent years. A large proportion of orthopaedic surgery residency PDs use a USMLE Step 1 minimum score when screening applications in an effort to reduce the number of applications to be reviewed.
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 947.784 Section 947.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. (a) Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 922.784 Section 922.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 905.780 Section 905.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 910.780 Section 910.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. (a) Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirement for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 947.780 Section 947.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. (a) Part 780 of this chapter, Surface Mining Permit Application—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 937.780 Section 937.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. (a) Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirement for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 912.784 Section 912.784 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 903.780 Section 903.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, applies to any person who submits an application to conduct...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 942.780 Section 942.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 942.784 Section 942.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 905.784 Section 905.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 937.784 Section 937.784 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 910.784 Section 910.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. (a) Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 941.780 Section 941.780 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. (a) Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 912.780 Section 912.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 933.780 Section 933.780 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operations plan. 939.780 Section 939.780 Mineral Resources OFFICE OF SURFACE... for reclamation and operations plan. (a) Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 921.780 Section 921.780 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 903.784 Section 903.784 Mineral Resources OFFICE OF SURFACE... for reclamation and operation plan. Part 784 of this chapter, Underground Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, applies to any person who submits an application...
Code of Federal Regulations, 2010 CFR
2010-07-01
... requirements for reclamation and operation plan. 922.780 Section 922.780 Mineral Resources OFFICE OF SURFACE... reclamation and operation plan. Part 780 of this chapter, Surface Mining Permit Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes application to conduct...
42 CFR 52b.12 - What are the minimum requirements of construction and equipment?
Code of Federal Regulations, 2010 CFR
2010-10-01
... and equipment? 52b.12 Section 52b.12 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND... requirements of construction and equipment? (a) General. In addition to being subject to other laws... have been determined by the Director to constitute minimum requirements of construction and equipment...
40 CFR 141.133 - Compliance requirements.
Code of Federal Regulations, 2010 CFR
2010-07-01
... specified by § 141.135(c). Systems may begin monitoring to determine whether Step 1 TOC removals can be met... the Step 1 requirements in § 141.135(b)(2) and must therefore apply for alternate minimum TOC removal (Step 2) requirements, is not eligible for retroactive approval of alternate minimum TOC removal (Step 2...
Federal Register 2010, 2011, 2012, 2013, 2014
2013-05-14
... Requirements on Valencia and Other Late Type Oranges AGENCY: Agricultural Marketing Service, USDA. ACTION...). This rule reduces the minimum size requirement for Valencia and other late type oranges shipped to... also reduces the minimum grade requirement for Valencia and other late type oranges shipped to...
DOT National Transportation Integrated Search
1997-02-01
This report contains a summary of the work performed during the development of a minimum performance standard for lavatory trash receptacle automatic fire extinguishers. The developmental work was performed under the direction of the International Ha...
29 CFR 505.3 - Prevailing minimum compensation.
Code of Federal Regulations, 2010 CFR
2010-07-01
... 29 Labor 3 2010-07-01 2010-07-01 false Prevailing minimum compensation. 505.3 Section 505.3 Labor... HUMANITIES § 505.3 Prevailing minimum compensation. (a)(1) In the absence of an alternative determination...)(2) of this section, the prevailing minimum compensation required to be paid under the Act to the...
Code of Federal Regulations, 2010 CFR
2010-04-01
... the family for nonpayment of minimum rent during the 90-day period beginning the month following the... Persons with Disabilities: Family Income and Family Payment; Occupancy Requirements for Section 8 Project-Based Assistance Family Payment § 5.630 Minimum rent. (a) Minimum rent. (1) The PHA must charge a family...
50 CFR 648.93 - Monkfish minimum fish sizes.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 50 Wildlife and Fisheries 12 2012-10-01 2012-10-01 false Monkfish minimum fish sizes. 648.93... Measures for the NE Multispecies and Monkfish Fisheries § 648.93 Monkfish minimum fish sizes. (a) General... fish size requirements established in this section. Minimum Fish Sizes (Total Length/Tail Length) Total...
50 CFR 648.93 - Monkfish minimum fish sizes.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 50 Wildlife and Fisheries 12 2013-10-01 2013-10-01 false Monkfish minimum fish sizes. 648.93... Measures for the NE Multispecies and Monkfish Fisheries § 648.93 Monkfish minimum fish sizes. (a) General... fish size requirements established in this section. Minimum Fish Sizes (Total Length/Tail Length) Total...
50 CFR 648.93 - Monkfish minimum fish sizes.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 50 Wildlife and Fisheries 10 2011-10-01 2011-10-01 false Monkfish minimum fish sizes. 648.93... Measures for the NE Multispecies and Monkfish Fisheries § 648.93 Monkfish minimum fish sizes. (a) General... fish size requirements established in this section. Minimum Fish Sizes (Total Length/Tail Length) Total...
75 FR 38423 - Minimum Levels of Financial Responsibility for Motor Carriers
Federal Register 2010, 2011, 2012, 2013, 2014
2010-07-02
... No. FMCSA-2006-26262] RIN 2126-AB05 Minimum Levels of Financial Responsibility for Motor Carriers... amends its regulations concerning minimum levels of financial responsibility for motor carriers to allow... principal place of business. This final rule does not change the required minimum levels of financial...
50 CFR 648.93 - Monkfish minimum fish sizes.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Monkfish minimum fish sizes. 648.93... Measures for the NE Multispecies and Monkfish Fisheries § 648.93 Monkfish minimum fish sizes. (a) General... fish size requirements established in this section. Minimum Fish Sizes (Total Length/Tail Length) Total...
Code of Federal Regulations, 2013 CFR
2013-07-01
... OPERATIONS WITHIN EACH STATE OREGON § 937.780 Surface mining permit applications—minimum requirements for... 468.350 and ORS 468.500 through ORS 468.580) administered by the Oregon Department of Environmental...
Code of Federal Regulations, 2011 CFR
2011-07-01
... OPERATIONS WITHIN EACH STATE OREGON § 937.780 Surface mining permit applications—minimum requirements for... 468.350 and ORS 468.500 through ORS 468.580) administered by the Oregon Department of Environmental...
Code of Federal Regulations, 2014 CFR
2014-07-01
... OPERATIONS WITHIN EACH STATE OREGON § 937.780 Surface mining permit applications—minimum requirements for... 468.350 and ORS 468.500 through ORS 468.580) administered by the Oregon Department of Environmental...
Elango, Rajavel; Humayun, Mohammad A; Turner, Justine M; Rafii, Mahroukh; Langos, Veronika; Ball, Ronald O; Pencharz, Paul B
2017-10-01
Background: The total sulfur amino acid (TSAA) and minimum Met requirements have been previously determined in healthy children. TSAA metabolism is altered in kidney disease. Whether TSAA requirements are altered in children with chronic renal insufficiency (CRI) is unknown. Objective: We sought to determine the TSAA (Met in the absence of Cys) requirements and minimum Met (in the presence of excess Cys) requirements in children with CRI. Methods: Five children (4 boys, 1 girl) aged 10 ± 2.6 y with CRI were randomly assigned to receive graded intakes of Met (0, 5, 10, 15, 25, and 35 mg · kg -1 · d -1 ) with no Cys in the diet. Four of the children (3 boys, 1 girl) were then randomly assigned to receive graded dietary intakes of Met (0, 2.5, 5, 7.5, 10, and 15 mg · kg -1 · d -1 ) with 21 mg · kg -1 · d -1 Cys. The mean TSAA and minimum Met requirements were determined by measuring the oxidation of l-[1- 13 C]Phe to 13 CO 2 (F 13 CO 2 ). A 2-phase linear-regression crossover analysis of the F 13 CO 2 data identified a breakpoint at minimal F 13 CO 2 Urine samples collected from all study days and from previous studies of healthy children were measured for sulfur metabolites. Results: The mean and population-safe (upper 95% CI) intakes of TSAA and minimum Met in children with CRI were determined to be 12.6 and 15.9 mg · kg -1 · d -1 and 7.3 and 10.9 mg · kg -1 · d -1 , respectively. In healthy school-aged children the mean and upper 95% CI intakes of TSAA and minimum Met were determined to be 12.9 and 17.2 mg · kg -1 · d -1 and 5.8 and 7.3 mg · kg -1 · d -1 , respectively. A comparison of the minimum Met requirements between healthy children and children with CRI indicated significant ( P < 0.05) differences. Conclusion: These results suggest that children with CRI have a similar mean and population-safe TSAA to that of healthy children, suggesting adequate Cys synthesis via transsulfuration, but higher minimum Met requirement, suggesting reduced remethylation rates. © 2017 American Society for Nutrition.
Resolution No. 480, 25 July 1989.
1989-01-01
This Iraq Resolution provides that female graduates may not be employed as officials in "state departments, socialist and mixed sectors, within the limits of [the] sixth degree, downwards, of the Civil Service Law . . . unless they practice nursing in the Ministry of Health or work at [the] Ministry of Industry and Military Industrialization for one year." During this year they are to receive the salary of the "minimum degree" for which their certificates qualify them. The year is to be counted as actual service for the purposes of "increment, promotion and pension." Female graduates who are appointed to military, medical, hygienic, engineering, and educational jobs are exempt from these work requirements.
Aging and cardiovascular complexity: effect of the length of RR tachograms
Nagaraj, Nithin
2016-01-01
As we age, our hearts undergo changes that result in a reduction in complexity of physiological interactions between different control mechanisms. This results in a potential risk of cardiovascular diseases which are the number one cause of death globally. Since cardiac signals are nonstationary and nonlinear in nature, complexity measures are better suited to handle such data. In this study, three complexity measures are used, namely Lempel–Ziv complexity (LZ), Sample Entropy (SampEn) and Effort-To-Compress (ETC). We determined the minimum length of RR tachogram required for characterizing complexity of healthy young and healthy old hearts. All the three measures indicated significantly lower complexity values for older subjects than younger ones. However, the minimum length of heart-beat interval data needed differs for the three measures, with LZ and ETC needing as low as 10 samples, whereas SampEn requires at least 80 samples. Our study indicates that complexity measures such as LZ and ETC are good candidates for the analysis of cardiovascular dynamics since they are able to work with very short RR tachograms. PMID:27957395
Hoisting and Rigging (Formerly Hoisting and Rigging Manual)
DOE Office of Scientific and Technical Information (OSTI.GOV)
NONE
1995-06-01
This standard is intended as a reference document to be used by supervisors, line managers, safety personnel, equipment operators, and any other personnel responsible for safety of hoisting and rigging operations at DOE sites. It quotes or paraphrases the US OSHA and ANSI requirements. It also encompasses, under one cover,hoisting and rigging requirements, codes, standards, and regulations, eliminating the need to maintain extensive (and often incomplete) libraries of hoisting and rigging standards throughout DOE. The standard occasionally goes beyond the minimum general industry standards established by OSHA and ANSI, and also delineates the more stringent requirements necessary to accomplish themore » complex, diversified, critical, and often hazardous hoisting and rigging work found with the DOE complex.« less
42 CFR 86.31 - Eligibility; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
....31 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES GRANTS FOR EDUCATION PROGRAMS IN OCCUPATIONAL SAFETY AND HEALTH Occupational Safety and Health Direct Traineeships § 86.31 Eligibility; minimum requirements. In...
42 CFR 86.31 - Eligibility; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
....31 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES GRANTS FOR EDUCATION PROGRAMS IN OCCUPATIONAL SAFETY AND HEALTH Occupational Safety and Health Direct Traineeships § 86.31 Eligibility; minimum requirements. In...
Code of Federal Regulations, 2013 CFR
2013-04-01
... 25 Indians 2 2013-04-01 2013-04-01 false Does a Tribe/Consortium have additional ongoing requirements to maintain minimum standards for Tribe/Consortium management systems? 1000.396 Section 1000.396... Miscellaneous Provisions § 1000.396 Does a Tribe/Consortium have additional ongoing requirements to maintain...
30 CFR 75.1713-6 - First-aid training program; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-07-01
... required under the provisions of §§ 75.1713-3 and 75.1713-4 shall include 10 class hours of training in a... 30 Mineral Resources 1 2014-07-01 2014-07-01 false First-aid training program; minimum requirements. 75.1713-6 Section 75.1713-6 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT...
A comparison of approaches for finding minimum identifying codes on graphs
NASA Astrophysics Data System (ADS)
Horan, Victoria; Adachi, Steve; Bak, Stanley
2016-05-01
In order to formulate mathematical conjectures likely to be true, a number of base cases must be determined. However, many combinatorial problems are NP-hard and the computational complexity makes this research approach difficult using a standard brute force approach on a typical computer. One sample problem explored is that of finding a minimum identifying code. To work around the computational issues, a variety of methods are explored and consist of a parallel computing approach using MATLAB, an adiabatic quantum optimization approach using a D-Wave quantum annealing processor, and lastly using satisfiability modulo theory (SMT) and corresponding SMT solvers. Each of these methods requires the problem to be formulated in a unique manner. In this paper, we address the challenges of computing solutions to this NP-hard problem with respect to each of these methods.
Forensic psychiatric expert witnessing within the criminal justice system in Germany.
Konrad, Norbert; Völlm, Birgit
2014-01-01
In recent years, the number of occupied beds in German forensic-psychiatric hospitals has continued to rise. Diversion refers to the removal of offenders from the criminal justice system at any stage of the procedure and court proceedings. There are no specific diversion programs in Germany but diversion does in fact happen via legal regulations that are based on the construct of legal responsibility. The assessments of responsibility as well as risk are the core tasks of forensic-psychiatric expert witnessing in Germany. Recommendations of an interdisciplinary working group serve as a guide to operationalize this forensic-psychiatric task. These recommendations list formal minimum requirements for expert reports on the question of criminal responsibility and risk assessment as well as minimum standards regarding content and in writing the report. Copyright © 2013 Elsevier Ltd. All rights reserved.
24 CFR 891.145 - Owner deposit (Minimum Capital Investment).
Code of Federal Regulations, 2010 CFR
2010-04-01
... General Program Requirements § 891.145 Owner deposit (Minimum Capital Investment). As a Minimum Capital... Investment shall be one-half of one percent (0.5%) of the HUD-approved capital advance, not to exceed $25,000. ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Owner deposit (Minimum Capital...
78 FR 57585 - Minimum Training Requirements for Entry-Level Commercial Motor Vehicle Operators
Federal Register 2010, 2011, 2012, 2013, 2014
2013-09-19
... specific minimum number of training hours. Instead, these commenters support a performance-based approach... support a minimum hours-based approach to training. They stated that FMCSA must specify the minimum number...\\ Additionally, some supporters of an hours-based training approach believed that the Agency's proposal did not...
14 CFR 91.157 - Special VFR weather minimums.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 14 Aeronautics and Space 2 2013-01-01 2013-01-01 false Special VFR weather minimums. 91.157... Flight Rules § 91.157 Special VFR weather minimums. (a) Except as provided in appendix D, section 3, of this part, special VFR operations may be conducted under the weather minimums and requirements of this...
14 CFR 91.157 - Special VFR weather minimums.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 14 Aeronautics and Space 2 2014-01-01 2014-01-01 false Special VFR weather minimums. 91.157... Flight Rules § 91.157 Special VFR weather minimums. (a) Except as provided in appendix D, section 3, of this part, special VFR operations may be conducted under the weather minimums and requirements of this...
14 CFR 91.157 - Special VFR weather minimums.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 14 Aeronautics and Space 2 2012-01-01 2012-01-01 false Special VFR weather minimums. 91.157... Flight Rules § 91.157 Special VFR weather minimums. (a) Except as provided in appendix D, section 3, of this part, special VFR operations may be conducted under the weather minimums and requirements of this...
14 CFR 91.157 - Special VFR weather minimums.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Special VFR weather minimums. 91.157... Flight Rules § 91.157 Special VFR weather minimums. (a) Except as provided in appendix D, section 3, of this part, special VFR operations may be conducted under the weather minimums and requirements of this...
14 CFR 91.157 - Special VFR weather minimums.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 2 2011-01-01 2011-01-01 false Special VFR weather minimums. 91.157... Flight Rules § 91.157 Special VFR weather minimums. (a) Except as provided in appendix D, section 3, of this part, special VFR operations may be conducted under the weather minimums and requirements of this...
23 CFR 1208.4 - Adoption of National Minimum Drinking Age.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 23 Highways 1 2011-04-01 2011-04-01 false Adoption of National Minimum Drinking Age. 1208.4..., DEPARTMENT OF TRANSPORTATION GUIDELINES NATIONAL MINIMUM DRINKING AGE § 1208.4 Adoption of National Minimum Drinking Age. The Secretary shall withhold ten percent of the amount required to be apportioned to any...
23 CFR 1208.4 - Adoption of National Minimum Drinking Age.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 23 Highways 1 2013-04-01 2013-04-01 false Adoption of National Minimum Drinking Age. 1208.4..., DEPARTMENT OF TRANSPORTATION GUIDELINES NATIONAL MINIMUM DRINKING AGE § 1208.4 Adoption of National Minimum Drinking Age. The Secretary shall withhold ten percent of the amount required to be apportioned to any...
23 CFR 1208.4 - Adoption of National Minimum Drinking Age.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 23 Highways 1 2012-04-01 2012-04-01 false Adoption of National Minimum Drinking Age. 1208.4..., DEPARTMENT OF TRANSPORTATION GUIDELINES NATIONAL MINIMUM DRINKING AGE § 1208.4 Adoption of National Minimum Drinking Age. The Secretary shall withhold ten percent of the amount required to be apportioned to any...
23 CFR 1208.4 - Adoption of National Minimum Drinking Age.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 23 Highways 1 2014-04-01 2014-04-01 false Adoption of National Minimum Drinking Age. 1208.4..., DEPARTMENT OF TRANSPORTATION GUIDELINES NATIONAL MINIMUM DRINKING AGE § 1208.4 Adoption of National Minimum Drinking Age. The Secretary shall withhold ten percent of the amount required to be apportioned to any...
14 CFR 25.1443 - Minimum mass flow of supplemental oxygen.
Code of Federal Regulations, 2013 CFR
2013-01-01
... 14 Aeronautics and Space 1 2013-01-01 2013-01-01 false Minimum mass flow of supplemental oxygen... § 25.1443 Minimum mass flow of supplemental oxygen. (a) If continuous flow equipment is installed for use by flight crewmembers, the minimum mass flow of supplemental oxygen required for each crewmember...
14 CFR 25.1443 - Minimum mass flow of supplemental oxygen.
Code of Federal Regulations, 2014 CFR
2014-01-01
... 14 Aeronautics and Space 1 2014-01-01 2014-01-01 false Minimum mass flow of supplemental oxygen... § 25.1443 Minimum mass flow of supplemental oxygen. (a) If continuous flow equipment is installed for use by flight crewmembers, the minimum mass flow of supplemental oxygen required for each crewmember...
14 CFR 25.1443 - Minimum mass flow of supplemental oxygen.
Code of Federal Regulations, 2012 CFR
2012-01-01
... 14 Aeronautics and Space 1 2012-01-01 2012-01-01 false Minimum mass flow of supplemental oxygen... § 25.1443 Minimum mass flow of supplemental oxygen. (a) If continuous flow equipment is installed for use by flight crewmembers, the minimum mass flow of supplemental oxygen required for each crewmember...
14 CFR 25.1443 - Minimum mass flow of supplemental oxygen.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 14 Aeronautics and Space 1 2011-01-01 2011-01-01 false Minimum mass flow of supplemental oxygen... § 25.1443 Minimum mass flow of supplemental oxygen. (a) If continuous flow equipment is installed for use by flight crewmembers, the minimum mass flow of supplemental oxygen required for each crewmember...
No Way Out: Working Poor Women in the United States.
ERIC Educational Resources Information Center
National Commission on Working Women, Washington, DC.
This report examines the situation of the one-half of the nation's nine million working poor who are female. It begins by looking at just who the working poor are. Two areas of study are education levels and types of jobs. The discussion then shifts to minimum wage earners and their characteristics, the current status of the minimum wage, and the…
Code of Federal Regulations, 2012 CFR
2012-07-01
... vibration or changing temperature. The canister must have a minimum working capacity as follows: (i) You may... whole carbon bed. The carbon must have a minimum carbon working capacity of 90 grams per liter. (f) We...
Code of Federal Regulations, 2014 CFR
2014-07-01
... vibration or changing temperature. The canister must have a minimum working capacity as follows: (i) You may... whole carbon bed. The carbon must have a minimum carbon working capacity of 90 grams per liter. (f) We...
Code of Federal Regulations, 2011 CFR
2011-07-01
... vibration or changing temperature. The canister must have a minimum working capacity as follows: (i) You may... whole carbon bed. The carbon must have a minimum carbon working capacity of 90 grams per liter. (f) We...
Code of Federal Regulations, 2013 CFR
2013-07-01
... vibration or changing temperature. The canister must have a minimum working capacity as follows: (i) You may... whole carbon bed. The carbon must have a minimum carbon working capacity of 90 grams per liter. (f) We...
NASA Technical Reports Server (NTRS)
Jack, Devin P.; Hoffler, Keith D.; Johnson, Sally C.
2014-01-01
A need exists to safely integrate Unmanned Aircraft Systems (UAS) into the United States' National Airspace System. Replacing manned aircraft's see-and-avoid capability in the absence of an onboard pilot is one of the key challenges associated with safe integration. Sense-and-avoid (SAA) systems will have to achieve yet-to-be-determined required separation distances for a wide range of encounters. They will also need to account for the maneuver performance of the UAS they are paired with. The work described in this paper is aimed at developing an understanding of the trade space between UAS maneuver performance and SAA system performance requirements, focusing on a descent avoidance maneuver. An assessment of current manned and unmanned aircraft performance was used to establish potential UAS performance test matrix bounds. Then, near-term UAS integration work was used to narrow down the scope. A simulator was developed with sufficient fidelity to assess SAA system performance requirements. The simulator generates closest-point-of-approach (CPA) data from the wide range of UAS performance models maneuvering against a single intruder with various encounter geometries. Initial attempts to model the results made it clear that developing maneuver performance groups is required. Discussion of the performance groups developed and how to know in which group an aircraft belongs for a given flight condition and encounter is included. The groups are airplane, flight condition, and encounter specific, rather than airplane-only specific. Results and methodology for developing UAS maneuver performance requirements are presented for a descent avoidance maneuver. Results for the descent maneuver indicate that a minimum specific excess power magnitude can assure a minimum CPA for a given time-to-go prediction. However, smaller amounts of specific excess power may achieve or exceed the same CPA if the UAS has sufficient speed to trade for altitude. The results of this study will support UAS maneuver performance requirements development for integrating UAS in the NAS. The methods described are being used to help RTCA Special Committee 228 develop requirements.
42 CFR 441.404 - Minimum protection requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 4 2011-10-01 2011-10-01 false Minimum protection requirements. 441.404 Section 441.404 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... receiving community supported living arrangements services are protected from neglect, physical and sexual...
42 CFR 441.404 - Minimum protection requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 4 2013-10-01 2013-10-01 false Minimum protection requirements. 441.404 Section 441.404 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... receiving community supported living arrangements services are protected from neglect, physical and sexual...
42 CFR 441.404 - Minimum protection requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 4 2012-10-01 2012-10-01 false Minimum protection requirements. 441.404 Section 441.404 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN... receiving community supported living arrangements services are protected from neglect, physical and sexual...
Do Some Workers Have Minimum Wage Careers?
ERIC Educational Resources Information Center
Carrington, William J.; Fallick, Bruce C.
2001-01-01
Most workers who begin their careers in minimum-wage jobs eventually gain more experience and move on to higher paying jobs. However, more than 8% of workers spend at least half of their first 10 working years in minimum wage jobs. Those more likely to have minimum wage careers are less educated, minorities, women with young children, and those…
Current and Proposed Regulations Related to Minimum Risk Pesticides
Minimum risk pesticides are exempted from requirements for registration with EPA but are still subject to certain criteria to qualify as minimum risk and may be further regulated by states. See links to the key regulatory citations.
NASA Technical Reports Server (NTRS)
1994-01-01
This document is the product of the KSC Survey and Audit Working Group composed of civil service and contractor Safety, Reliability, and Quality Assurance (SR&QA) personnel. The program described herein provides standardized terminology, uniformity of survey and audit operations, and emphasizes process assessments rather than a program based solely on compliance. The program establishes minimum training requirements, adopts an auditor certification methodology, and includes survey and audit metrics for the audited organizations as well as the auditing organization.
Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project
NASA Technical Reports Server (NTRS)
Fern, Lisa
2017-01-01
This presentation summarizes the simulation work conducted by the Unmanned Aircraft Systems (UAS) Integration in the National Airspace System (NAS) Project. It focuses on the contribution of that research to the development of RTCA Special Committee 228's (SC-228) Minimum Operational Performance Standards (MOPS) for UAS. The research objectives and primary findings from four different human-in-the-loop simulations are discussed, along with the specific requirements these studies led to in the final MOPS document.
NASA Astrophysics Data System (ADS)
Ma, Guang-ying; Yao, Yun-long
2018-03-01
In this paper, the fatigue lives of a new type of assembled marine floating platform for special purposes were studied. Firstly, by using ANSYS AQWA software, the hydrodynamic model of the platform was established. Secondly, the structural stresses under alternating change loads were calculated under complex water environments, such as wind, wave, current and ice. The minimum fatigue lives were obtained under different working conditions. The analysis results showed that the fatigue life of the platform structure can meet the requirements
Code of Federal Regulations, 2011 CFR
2011-07-01
... Applications—Minimum Requirements for Reclamation and Operation Plan, shall apply to any person who makes... for an underground mining permit shall also indicate how compliance will be achieved with the Washington Water Pollution Control Act, RCW 90.48. ...
42 CFR 84.1134 - Respirator containers; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Respirator containers; minimum requirements. 84.1134 Section 84.1134 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Dust...
42 CFR 84.1134 - Respirator containers; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 1 2013-10-01 2013-10-01 false Respirator containers; minimum requirements. 84.1134 Section 84.1134 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Dust...
42 CFR 84.1134 - Respirator containers; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 1 2011-10-01 2011-10-01 false Respirator containers; minimum requirements. 84.1134 Section 84.1134 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Dust...
42 CFR 84.1134 - Respirator containers; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 1 2014-10-01 2014-10-01 false Respirator containers; minimum requirements. 84.1134 Section 84.1134 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Dust...
42 CFR 84.1134 - Respirator containers; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 1 2012-10-01 2012-10-01 false Respirator containers; minimum requirements. 84.1134 Section 84.1134 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Dust...
24 CFR 35.155 - Minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-04-01
... 24 Housing and Urban Development 1 2014-04-01 2014-04-01 false Minimum requirements. 35.155 Section 35.155 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint...
24 CFR 35.155 - Minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-04-01
... 24 Housing and Urban Development 1 2012-04-01 2012-04-01 false Minimum requirements. 35.155 Section 35.155 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint...
24 CFR 35.155 - Minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-04-01
... 24 Housing and Urban Development 1 2011-04-01 2011-04-01 false Minimum requirements. 35.155 Section 35.155 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint...
24 CFR 35.155 - Minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-04-01
... 24 Housing and Urban Development 1 2013-04-01 2013-04-01 false Minimum requirements. 35.155 Section 35.155 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint...
24 CFR 35.155 - Minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-04-01
... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Minimum requirements. 35.155 Section 35.155 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development LEAD-BASED PAINT POISONING PREVENTION IN CERTAIN RESIDENTIAL STRUCTURES General Lead-Based Paint...
45 CFR 303.20 - Minimum organizational and staffing requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 45 Public Welfare 2 2010-10-01 2010-10-01 false Minimum organizational and staffing requirements. 303.20 Section 303.20 Public Welfare Regulations Relating to Public Welfare OFFICE OF CHILD SUPPORT ENFORCEMENT (CHILD SUPPORT ENFORCEMENT PROGRAM), ADMINISTRATION FOR CHILDREN AND FAMILIES, DEPARTMENT OF...
42 CFR 84.72 - Breathing tubes; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 1 2012-10-01 2012-10-01 false Breathing tubes; minimum requirements. 84.72 Section 84.72 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.85 - Breathing bags; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 1 2011-10-01 2011-10-01 false Breathing bags; minimum requirements. 84.85 Section 84.85 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.72 - Breathing tubes; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 1 2011-10-01 2011-10-01 false Breathing tubes; minimum requirements. 84.72 Section 84.72 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.78 - Head harnesses; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 1 2014-10-01 2014-10-01 false Head harnesses; minimum requirements. 84.78 Section 84.78 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.76 - Facepieces; eyepieces; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 1 2012-10-01 2012-10-01 false Facepieces; eyepieces; minimum requirements. 84.76 Section 84.76 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.62 - Component parts; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 1 2013-10-01 2013-10-01 false Component parts; minimum requirements. 84.62 Section 84.62 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES General...
42 CFR 84.76 - Facepieces; eyepieces; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Facepieces; eyepieces; minimum requirements. 84.76 Section 84.76 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.72 - Breathing tubes; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Breathing tubes; minimum requirements. 84.72 Section 84.72 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.76 - Facepieces; eyepieces; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 1 2014-10-01 2014-10-01 false Facepieces; eyepieces; minimum requirements. 84.76 Section 84.76 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.78 - Head harnesses; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 1 2012-10-01 2012-10-01 false Head harnesses; minimum requirements. 84.78 Section 84.78 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.72 - Breathing tubes; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 1 2013-10-01 2013-10-01 false Breathing tubes; minimum requirements. 84.72 Section 84.72 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.72 - Breathing tubes; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 1 2014-10-01 2014-10-01 false Breathing tubes; minimum requirements. 84.72 Section 84.72 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.78 - Head harnesses; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 1 2011-10-01 2011-10-01 false Head harnesses; minimum requirements. 84.78 Section 84.78 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.62 - Component parts; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 1 2012-10-01 2012-10-01 false Component parts; minimum requirements. 84.62 Section 84.62 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES General...
42 CFR 84.85 - Breathing bags; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 1 2014-10-01 2014-10-01 false Breathing bags; minimum requirements. 84.85 Section 84.85 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.74 - Apparatus containers; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 1 2014-10-01 2014-10-01 false Apparatus containers; minimum requirements. 84.74 Section 84.74 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.62 - Component parts; minimum requirements.
Code of Federal Regulations, 2014 CFR
2014-10-01
... 42 Public Health 1 2014-10-01 2014-10-01 false Component parts; minimum requirements. 84.62 Section 84.62 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES General...
42 CFR 84.78 - Head harnesses; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 1 2013-10-01 2013-10-01 false Head harnesses; minimum requirements. 84.78 Section 84.78 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.62 - Component parts; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Component parts; minimum requirements. 84.62 Section 84.62 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES General...
42 CFR 84.74 - Apparatus containers; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 1 2013-10-01 2013-10-01 false Apparatus containers; minimum requirements. 84.74 Section 84.74 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.78 - Head harnesses; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Head harnesses; minimum requirements. 84.78 Section 84.78 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.85 - Breathing bags; minimum requirements.
Code of Federal Regulations, 2010 CFR
2010-10-01
... 42 Public Health 1 2010-10-01 2010-10-01 false Breathing bags; minimum requirements. 84.85 Section 84.85 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.76 - Facepieces; eyepieces; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 1 2013-10-01 2013-10-01 false Facepieces; eyepieces; minimum requirements. 84.76 Section 84.76 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.85 - Breathing bags; minimum requirements.
Code of Federal Regulations, 2013 CFR
2013-10-01
... 42 Public Health 1 2013-10-01 2013-10-01 false Breathing bags; minimum requirements. 84.85 Section 84.85 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.76 - Facepieces; eyepieces; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 1 2011-10-01 2011-10-01 false Facepieces; eyepieces; minimum requirements. 84.76 Section 84.76 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.74 - Apparatus containers; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 1 2012-10-01 2012-10-01 false Apparatus containers; minimum requirements. 84.74 Section 84.74 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
42 CFR 84.62 - Component parts; minimum requirements.
Code of Federal Regulations, 2011 CFR
2011-10-01
... 42 Public Health 1 2011-10-01 2011-10-01 false Component parts; minimum requirements. 84.62 Section 84.62 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES General...
42 CFR 84.85 - Breathing bags; minimum requirements.
Code of Federal Regulations, 2012 CFR
2012-10-01
... 42 Public Health 1 2012-10-01 2012-10-01 false Breathing bags; minimum requirements. 84.85 Section 84.85 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES APPROVAL OF RESPIRATORY PROTECTIVE DEVICES Self...
DOT National Transportation Integrated Search
2012-10-01
A handout with tables representing the material requirements, test methods, responsibilities, and minimum classification levels mixture-based specification for flexible base and details on aggregate and test methods employed, along with agency and co...
Minimizing the area required for time constants in integrated circuits
NASA Technical Reports Server (NTRS)
Lyons, J. C.
1972-01-01
When a medium- or large-scale integrated circuit is designed, efforts are usually made to avoid the use of resistor-capacitor time constant generators. The capacitor needed for this circuit usually takes up more surface area on the chip than several resistors and transistors. When the use of this network is unavoidable, the designer usually makes an effort to see that the choice of resistor and capacitor combinations is such that a minimum amount of surface area is consumed. The optimum ratio of resistance to capacitance that will result in this minimum area is equal to the ratio of resistance to capacitance which may be obtained from a unit of surface area for the particular process being used. The minimum area required is a function of the square root of the reciprocal of the products of the resistance and capacitance per unit area. This minimum occurs when the area required by the resistor is equal to the area required by the capacitor.
Minimum Requirements for Taxicab Security Cameras.
Zeng, Shengke; Amandus, Harlan E; Amendola, Alfred A; Newbraugh, Bradley H; Cantis, Douglas M; Weaver, Darlene
2014-07-01
The homicide rate of taxicab-industry is 20 times greater than that of all workers. A NIOSH study showed that cities with taxicab-security cameras experienced significant reduction in taxicab driver homicides. Minimum technical requirements and a standard test protocol for taxicab-security cameras for effective taxicab-facial identification were determined. The study took more than 10,000 photographs of human-face charts in a simulated-taxicab with various photographic resolutions, dynamic ranges, lens-distortions, and motion-blurs in various light and cab-seat conditions. Thirteen volunteer photograph-evaluators evaluated these face photographs and voted for the minimum technical requirements for taxicab-security cameras. Five worst-case scenario photographic image quality thresholds were suggested: the resolution of XGA-format, highlight-dynamic-range of 1 EV, twilight-dynamic-range of 3.3 EV, lens-distortion of 30%, and shutter-speed of 1/30 second. These minimum requirements will help taxicab regulators and fleets to identify effective taxicab-security cameras, and help taxicab-security camera manufacturers to improve the camera facial identification capability.
Visual ergonomics and computer work--is it all about computer glasses?
Jonsson, Christina
2012-01-01
The Swedish Provisions on Work with Display Screen Equipment and the EU Directive on the minimum safety and health requirements for work with display screen equipment cover several important visual ergonomics aspects. But a review of cases and questions to the Swedish Work Environment Authority clearly shows that most attention is given to the demands for eyesight tests and special computer glasses. Other important visual ergonomics factors are at risk of being neglected. Today computers are used everywhere, both at work and at home. Computers can be laptops, PDA's, tablet computers, smart phones, etc. The demands on eyesight tests and computer glasses still apply but the visual demands and the visual ergonomics conditions are quite different compared to the use of a stationary computer. Based on this review, we raise the question if the demand on the employer to provide the employees with computer glasses is outdated.
Minimum requirements for predictive pore-network modeling of solute transport in micromodels
NASA Astrophysics Data System (ADS)
Mehmani, Yashar; Tchelepi, Hamdi A.
2017-10-01
Pore-scale models are now an integral part of analyzing fluid dynamics in porous materials (e.g., rocks, soils, fuel cells). Pore network models (PNM) are particularly attractive due to their computational efficiency. However, quantitative predictions with PNM have not always been successful. We focus on single-phase transport of a passive tracer under advection-dominated regimes and compare PNM with high-fidelity direct numerical simulations (DNS) for a range of micromodel heterogeneities. We identify the minimum requirements for predictive PNM of transport. They are: (a) flow-based network extraction, i.e., discretizing the pore space based on the underlying velocity field, (b) a Lagrangian (particle tracking) simulation framework, and (c) accurate transfer of particles from one pore throat to the next. We develop novel network extraction and particle tracking PNM methods that meet these requirements. Moreover, we show that certain established PNM practices in the literature can result in first-order errors in modeling advection-dominated transport. They include: all Eulerian PNMs, networks extracted based on geometric metrics only, and flux-based nodal transfer probabilities. Preliminary results for a 3D sphere pack are also presented. The simulation inputs for this work are made public to serve as a benchmark for the research community.
A review of drug delivery systems for capsule endoscopy.
Munoz, Fredy; Alici, Gursel; Li, Weihua
2014-05-01
The development of a highly controllable drug delivery system (DDS) for capsule endoscopy has become an important field of research due to its promising applications in therapeutic treatment of diseases in the gastrointestinal (GI) tract and drug absorption studies. Several factors need to be considered to establish the minimum requirements for a functional DDS. Environmental factors of the GI tract and also pharmaceutical factors can help determine the requirements to be met by a DDS in an endoscopic capsule. In order to minimize the influence of such factors on the performance of an effective DDS, at least two mechanisms should be incorporated into a capsule endoscope: an anchoring mechanism to control the capsule position and a drug release mechanism to control variables such as the drug release rate, number of doses and amount of drug released. The implementation of such remotely actuated mechanisms is challenging due to several constraints, including the limited space available in a swallowable capsule endoscope and the delicate and complex environment within the GI tract. This paper presents a comprehensive overview of existing DDS. A comparison of such DDS for capsule endoscopy based on the minimum DDS requirements is presented and future work is also discussed. Copyright © 2013 Elsevier B.V. All rights reserved.
A Practical, Hardware Friendly MMSE Detector for MIMO-OFDM-Based Systems
NASA Astrophysics Data System (ADS)
Kim, Hun Seok; Zhu, Weijun; Bhatia, Jatin; Mohammed, Karim; Shah, Anish; Daneshrad, Babak
2008-12-01
Design and implementation of a highly optimized MIMO (multiple-input multiple-output) detector requires cooptimization of the algorithm with the underlying hardware architecture. Special attention must be paid to application requirements such as throughput, latency, and resource constraints. In this work, we focus on a highly optimized matrix inversion free [InlineEquation not available: see fulltext.] MMSE (minimum mean square error) MIMO detector implementation. The work has resulted in a real-time field-programmable gate array-based implementation (FPGA-) on a Xilinx Virtex-2 6000 using only 9003 logic slices, 66 multipliers, and 24 Block RAMs (less than 33% of the overall resources of this part). The design delivers over 420 Mbps sustained throughput with a small 2.77-microsecond latency. The designed [InlineEquation not available: see fulltext.] linear MMSE MIMO detector is capable of complying with the proposed IEEE 802.11n standard.
Altair Lander Life Support: Requirement Analysis Cycles 1 and 2
NASA Technical Reports Server (NTRS)
Anderson, Molly; Curley, Su; Rotter, Henry; Yagoda, Evan
2009-01-01
Life support systems are a critical part of human exploration beyond low earth orbit. NASA s Altair Lunar Lander has unique missions to perform and will need a unique life support system to complete them. Initial work demonstrated a feasible minimally-functional Lander design. This work was completed in Design Analysis Cycles (DAC) 1, 2, and 3 were reported in a previous paper. On October 21, 2008, the Altair project completed the Mission Concept Review (MCR), moving the project into Phase A. In Phase A activities, the project is preparing for the System Requirements Review (SRR). Altair has conducted two Requirements Analysis Cycles (RACs) to begin this work. During this time, the life support team must examine the Altair mission concepts, Constellation Program level requirements, and interfaces with other vehicles and spacesuits to derive the right set of requirements for the new vehicle. The minimum functionality design meets some of these requirements already and can be easily adapted to meet others. But Altair must identify which will be more costly in mass, power, or other resources to meet. These especially costly requirements must be analyzed carefully to be sure they are truly necessary, and are the best way of explaining and meeting the true need. If they are necessary and clear, they become important mass threats to track at the vehicle level. If they are not clear or do not seem necessary to all stakeholders, Altair must work to redefine them or push back on the requirements writers. Additionally, the life support team is evaluating new technologies to see if they are more effective than the existing baseline design at performing necessary functions in Altair s life support system.
Altair Lander Life Support: Requirements Analysis Cycles 1 and 2
NASA Technical Reports Server (NTRS)
Anderson, Molly; Curley, Su; Rotter, Henry; Yagoda, Evan
2010-01-01
Life support systems are a critical part of human exploration beyond low earth orbit. NASA's Altair Lunar Lander has unique missions to perform and will need a unique life support system to complete them. Initial work demonstrated a feasible minimally -functional Lander design. This work was completed in Design Analysis Cycles (DAC) 1, 2, and 3 were reported in a previous paper'. On October 21, 2008, the Altair project completed the Mission Concept Review (MCR), moving the project into Phase A. In Phase A activities, the project is preparing for the System Requirements Review (SRR). Altair has conducted two Requirements Analysis Cycles (RACs) to begin this work. During this time, the life support team must examine the Altair mission concepts, Constellation Program level requirements, and interfaces with other vehicles and spacesuits to derive the right set of requirements for the new vehicle. The minimum functionality design meets some of these requirements already and can be easily adapted to meet others. But Altair must identify which will be more costly in mass, power, or other resources to meet. These especially costly requirements must be analyzed carefully to be sure they are truly necessary, and are the best way of explaining and meeting the true need. If they are necessary and clear, they become important mass threats to track at the vehicle level. If they are not clear or do not seem necessary to all stakeholders, Altair must work to redefine them or push back on the requirements writers. Additionally, the life support team is evaluating new technologies to see if they are more effective than the existing baseline design at performing necessary functions in Altair's life support system.
Buckler, Denny R., Foster L. Mayer, Mark R. Ellersieck and Amha Asfaw. 2003. Evaluation of Minimum Data Requirements for Acute Toxicity Value Extrapolation with Aquatic Organisms. EPA/600/R-03/104. U.S. Environmental Protection Agency, National Health and Environmental Effects Re...
13 CFR 301.4 - Investment rates.
Code of Federal Regulations, 2010 CFR
2010-01-01
... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Investment rates. 301.4 Section... ELIGIBILITY, INVESTMENT RATE AND PROPOSAL AND APPLICATION REQUIREMENTS Investment Rates and Matching Share Requirements § 301.4 Investment rates. (a) Minimum Investment Rate. There is no minimum Investment Rate for a...
13 CFR 301.4 - Investment rates.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 13 Business Credit and Assistance 1 2011-01-01 2011-01-01 false Investment rates. 301.4 Section... ELIGIBILITY, INVESTMENT RATE AND APPLICATION REQUIREMENTS Investment Rates and Matching Share Requirements § 301.4 Investment rates. (a) Minimum Investment Rate. There is no minimum Investment Rate for a Project...
12 CFR 933.4 - Transition provisions.
Code of Federal Regulations, 2011 CFR
2011-01-01
... 12 Banks and Banking 7 2011-01-01 2011-01-01 false Transition provisions. 933.4 Section 933.4 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOME LOAN BANK RISK MANAGEMENT AND CAPITAL... its minimum leverage capital requirement and its minimum risk-based capital requirement. The capital...
33 CFR 154.1130 - Requirements for prepositioned response equipment.
Code of Federal Regulations, 2012 CFR
2012-07-01
... Additional Response Plan Requirements for a Trans-Alaska Pipeline Authorization Act (TAPAA) Facility...: (a) On-water recovery equipment with a minimum effective daily recovery rate of 30,000 barrels... of a discharge. (c) On-water recovery equipment with a minimum effective daily recovery rate of 40...
33 CFR 154.1130 - Requirements for prepositioned response equipment.
Code of Federal Regulations, 2011 CFR
2011-07-01
... Additional Response Plan Requirements for a Trans-Alaska Pipeline Authorization Act (TAPAA) Facility...: (a) On-water recovery equipment with a minimum effective daily recovery rate of 30,000 barrels... of a discharge. (c) On-water recovery equipment with a minimum effective daily recovery rate of 40...
33 CFR 154.1130 - Requirements for prepositioned response equipment.
Code of Federal Regulations, 2013 CFR
2013-07-01
... Additional Response Plan Requirements for a Trans-Alaska Pipeline Authorization Act (TAPAA) Facility...: (a) On-water recovery equipment with a minimum effective daily recovery rate of 30,000 barrels... of a discharge. (c) On-water recovery equipment with a minimum effective daily recovery rate of 40...
33 CFR 154.1130 - Requirements for prepositioned response equipment.
Code of Federal Regulations, 2014 CFR
2014-07-01
... Additional Response Plan Requirements for a Trans-Alaska Pipeline Authorization Act (TAPAA) Facility...: (a) On-water recovery equipment with a minimum effective daily recovery rate of 30,000 barrels... of a discharge. (c) On-water recovery equipment with a minimum effective daily recovery rate of 40...
76 FR 24831 - Alternative to Minimum Days Off Requirements
Federal Register 2010, 2011, 2012, 2013, 2014
2011-05-03
... NUCLEAR REGULATORY COMMISSION 10 CFR Part 26 RIN 3150-AI94 [NRC-2011-0058] Alternative to Minimum Days Off Requirements AGENCY: Nuclear Regulatory Commission. ACTION: Proposed rule; correction. SUMMARY: The U.S. Nuclear Regulatory Commission (NRC) is correcting a proposed rule that appeared in the...