Microbially mediated carbon mineralization: Geoengineering a carbon-neutral mine

NASA Astrophysics Data System (ADS)

Power, I. M.; McCutcheon, J.; Harrison, A. L.; Wilson, S. A.; Dipple, G. M.; Southam, G.

2013-12-01

Ultramafic and mafic mine tailings are a potentially valuable feedstock for carbon mineralization, affording the mining industry an opportunity to completely offset their carbon emissions. Passive carbon mineralization has previously been documented at the abandoned Clinton Creek asbestos mine, and the active Diavik diamond mine and Mount Keith nickel mine, yet the majority of tailings remain unreacted. Examples of microbe-carbonate interactions at each mine suggest that biological pathways could be harnessed to promote carbon mineralization. In suitable environmental conditions, microbes can mediate geochemical processes to accelerate mineral dissolution, increase the supply of carbon dioxide (CO2), and induce carbonate precipitation, all of which may accelerate carbon mineralization. Tailings mineralogy and the availability of a CO2 point source are key considerations in designing tailings storage facilities (TSF) for optimizing carbon mineralization. We evaluate the efficacy of acceleration strategies including bioleaching, biologically induced carbonate precipitation, and heterotrophic oxidation of waste organics, as well as abiotic strategies including enhancing passive carbonation through modifying tailings management practices and use of CO2 point sources (Fig. 1). With the aim of developing carbon-neutral mines, implementation of carbon mineralization strategies into TSF design will be driven by economic incentives and public pressure for environmental sustainability in the mining industry. Figure 1. Schematic illustrating geoengineered scenarios for carbon mineralization of ultramafic mine tailings. Scenarios A and B are based on non-point and point sources of CO2, respectively.

Integrated mined-area reclamation and land-use planning. Volume 3C. A case study of surface mining and reclamation planning: Georgia Kaolin Company Clay Mines, Washington County, Georgia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Guernsey, J L; Brown, L A; Perry, A O

1978-02-01

This case study examines the reclamation practices of the Georgia Kaolin's American Industrial Clay Company Division, a kaolin producer centered in Twiggs, Washington, and Wilkinson Counties, Georgia. The State of Georgia accounts for more than one-fourth of the world's kaolin production and about three-fourths of U.S. kaolin output. The mining of kaolin in Georgia illustrates the effects of mining and reclaiming lands disturbed by area surface mining. The disturbed areas are reclaimed under the rules and regulations of the Georgia Surface Mining Act of 1968. The natural conditions influencing the reclamation methodologies and techniques are markedly unique from those ofmore » other mining operations. The environmental disturbances and procedures used in reclaiming the kaolin mined lands are reviewed and implications for planners are noted.« less

The ``battle of gold'' under the light of green economics: a case study from Greece

NASA Astrophysics Data System (ADS)

Damigos, D.; Kaliampakos, D.

2006-05-01

Mining firms stimulate local and national economies but this comes at a certain cost. In the light of increasing public concern, external costs of environmental degradation and social disruption are no longer of pure academic interest. The assessment of mining projects on the grounds of sustainable development is critical in order to decide whether the exploitation of mineral resources is socially desirable. In practice, few steps have been taken towards this end. In this paper, a case study is illustrated that provides the means for evaluating the social worthiness of mining projects. The analysis, which is the first of its kind in Greece, deals with a major problem of the mining industry: the gold debate on the grounds of green economics. The assessment is based on the social cost benefit approach. Well-established techniques (e.g. benefit transfer) and innovative approaches have been adopted to overcome various practical problems

Applying data mining techniques to explore factors contributing to occupational injuries in Taiwan's construction industry.

PubMed

Cheng, Ching-Wu; Leu, Sou-Sen; Cheng, Ying-Mei; Wu, Tsung-Chih; Lin, Chen-Chung

2012-09-01

Construction accident research involves the systematic sorting, classification, and encoding of comprehensive databases of injuries and fatalities. The present study explores the causes and distribution of occupational accidents in the Taiwan construction industry by analyzing such a database using the data mining method known as classification and regression tree (CART). Utilizing a database of 1542 accident cases during the period 2000-2009, the study seeks to establish potential cause-and-effect relationships regarding serious occupational accidents in the industry. The results of this study show that the occurrence rules for falls and collapses in both public and private project construction industries serve as key factors to predict the occurrence of occupational injuries. The results of the study provide a framework for improving the safety practices and training programs that are essential to protecting construction workers from occasional or unexpected accidents. Copyright © 2011 Elsevier Ltd. All rights reserved.

Alexandra Masaitis, UNR NV, USA. PhD Grad St. Principles of Adoption of the Successful Environmental Policies and Practices Used in Developed Countries into the Russian Mining Industry

NASA Astrophysics Data System (ADS)

Masaitis, A.

2012-12-01

The successful implementation of the environmental policies in the mining industry is of a paramount importance, as it not only prevents both local and trans-border pollution but also guarantees a clean and healthy environment for the people regardless of their place of habitation. It is especially important to encourage the progress of the environmental policy implementation in less regulated countries such as the Russia because such countries have resource-oriented economy based on development of nonrenewable resources. Poor environmental practices in such countries will lead to local environmental crises that could eventually spill into surrounding countries including the most economically advanced. This abstract is a summary of a two-year research project attempted (1) to determine deficiencies of the Russian mining sector ecological policies and (2) to suggest substitute policies from developed countries that could be adapted to the Russian reality. The following research methods were used: 1. The method of the system analysis, where the system is an interaction of the sets of environmental policies; 2. The comparative method of inquiry, 3. Quantitative data analysis, where data was collected from "The collection of statistic data", the US EPA open reports, and the USGS Reports; 4. Review of the Norilsk Nickel Company annual reports. The following results were obtained: Identified the systemic crisis of the ecological environmental policies in the Russian mining sector based on the development of nonrenewable resources, in the absence of the ecological interest by the mining companies that lack mechanisms of environmental and public health protection, the lack of insurance policy, the lack of risk assessment, and in the presence of the audit and monitoring that do not address the local conditions. Based on the above, the following concepts were thought of to improve the environmental conditions in the Russian mining sector: 1. Was developed the Regional Environmental Management principle based on the local conditions; 2. Devised were criteria for the risk assessment for mining operations in Russia. Where the fundamental principals were public health, environmental and biodiversity impact, long- and short- term rehabilitation plans, compliance with international standards and norms. Every criterion has grade level of probability that directly affects quarterly fees. 3. Developed was the mechanism of the economic motivation to make mining operations "environmentally friendly" that includes defrayal of expenses from both direct and indirect damages. 4. Identified were spheres of possible cooperation between mining companies, government organizations, and the NGOs. These include development of standards for Good Neighbor Agreement, exchange of environmental information, international exchange of successful environmental, health, and safety practices. The study showed the necessity for the Russian Federation mining industry to adopt the more successful environmental policies and practices used in developed countries. To achieve this goal the Regional Environmental Management principle, the risk assessment criteria, the mechanism of the economic motivation, and the principles for international cooperation can play an extremely important role.

The Empirical Relationship between Mining Industry Development and Environmental Pollution in China.

PubMed

Li, Gerui; Lei, Yalin; Ge, Jianping; Wu, Sanmang

2017-03-02

This study uses a vector autoregression (VAR) model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2) chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3) tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries.

A Study on regeneration cases with industrial Heritage in mining areas of Korea

NASA Astrophysics Data System (ADS)

Cho, Seungyeoun; Ji, Sangwoo; Yim, Giljae

2017-04-01

The mining areas have to face urban decline problem in population and aging after its closing. Many mines were shut down due to changes in industrial structure through 20 century. Central and local governments has been trying to solve urban decline of abandoned mine areas by enacting special acts or introducing support programs for decades. In the year of 1995, South Korean government also enacted "Special act on the assistance to the development of abandoned mine areas" to promote the economy of abandoned mine areas that is depressed following the decline of the coal industry and to help balanced regional development and to improve the living standard of the residents in such abandoned mine areas. Local authorities has been trying to revitalize the regional economy by attracting tourism industry under the financial support and deregulation by this special law. With this background, this study analysis 13 regeneration cases which are utilizing the industrial heritage of the abandoned area in S. Korea. Despite the importance of mining, negative images of abandon mine have been engraved due to environmental destruction. Most of abandoned mines were left without any action since its closing. Early stage of abandoned mine area regeneration, such as Sabuk, Munkyong, are focusing on adjacent land not on abandoned mine. Abandoned mines were restored its original state and theme park including hotels, casinos and other tourist facilities were developed on adjacent land. Eco-trails on some granite caves such as Jungsun were opened to the public as natural resources not industrial heritage. The industrial heritage was very restricted to making museums about history of mining industry. However, there has been a significant change in perception toward reusing industrial heritage for urban regeneration in recent years. From the viewpoint of urban regeneration, abandon mine areas and its facilities are receiving attention as important regional assets as industrial heritage to build vibrant cities. The recent urban regeneration projects in abandoned mine areas, such as Pocheon, Kwangmyong and Anyang, are utilizing mining facilities as industrial heritage more actively. They introduced eco-friendly restoration method and made environmental parks or experience centers on mining areas themselves. In conclusion, urban regenerations of abandoned mine areas has been changed from tourist development in neighbouring areas to eco-friendly regeneration in abandoned mine areas. However, there are still some constraints for eco-friendly regeneration. The mine operators have to restore abandoned mine areas to the original state after closing under the current law, "Mining damage prevention and restoration act". Thus lots of abandoned mine areas were left undeveloped or changed to forest. For promoting utilization of mine facilities as industrial heritage, the law have to allow reuse its infrastructure such as loads and subsidiary facilities for urban regeneration.

Reduction of Conflicts in Mining Development Using "Good Neighbor Agreements"

NASA Astrophysics Data System (ADS)

Masaitis, A.

2013-05-01

New environmental and social challenges for the mining industry in both developed and developing countries show the obvious need to implement "responsible" mining practices that include improved community involvement. Good Neighbor Agreements (GNA's) are a relatively new mechanism for improving communication and trust between a mining company and the community. The focus of a GNA will be to provide a written and enforceable agreement, negotiated between the concerned public and the respective mining company to respond to concerns from the public, and also provide a mechanism for conflict resolution, when there is mutual benefit to maintain a working relationship. Development of GNA's, a recently evolving process that promotes environmentally sound relationships between mines and the surrounding communities. Modify and apply the resulting GNA formulas to the developing countries and countries with transitional economies. This is particularly important for countries that have poorly functioning regulatory systems that cannot guarantee a healthy and safe environment for the communities. The fundamental questions addressed by this research. 1. This is a three-year research project started in August 2012 at the University of Nevada, Reno (UNR) to develop a Good Neighbor Agreements standards as well as to investigate the details of mine development. 2. Identify spheres of possible cooperation between mining companies, government organizations, and the Non-Governmental Organizations (NGO's). Use this cooperation to develop international standards for the GNA, to promote exchange of environmental information, and exchange of successful environmental, health, and safety practices between mining operations from different countries. Discussion: The Good Neighbor Agreement currently evolving will address the following: 1. Provide an economically viable mechanism for developing a partnership between mining operations and the local communities that will increase mining industry's accountability and provide higher levels of confidence for the community that a mine is operated in a safe and sustainable manner. 2. Increase the diversity of people benefiting from the results of this research by providing standards that could be adopted in developing countries. The goal of the GNA is to have open access for the public to the safety, health, and environmental information pertaining to the mining operation, as well as to educate the local communities about safe and sustainable mining practices that promote mutual acknowledgment of the need to build a relationship amenable to each other's needs. Frequent conflicts between mining companies and surrounding communities lead to work disruptions or even mine closures and show the necessity of a less confrontational approach to environmental and social justice. Because of the higher quality environmental standards already in place, this new approach perhaps should first be established in developed countries and then applied to other countries with less developed economies. The Good Neighbor Agreement is a unique way to provide the benefits for the both mining operations and local community to provide a mechanism for development of trust and communication that offer the potential to protect both mining and community interests, and can possibly reduce conflicts in resource development projects.

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Coal must make a comeback, but the general practice in times past has been to use coal when other fuels were not available. Coal production did not increase in 1973. Coal output increase can only be achieved if wildcat strikes and absenteeism stops, mine health and safety harassment subsides, adequate transportation is furnished, price controls abolished, and air pollution laws changed so that sulfur content is disregarded. The coal industry must be assured of a long-term market and iron-clad contracts before new mining is developed. The coal industry needs necessary raw materials to operate at full capacity and this includesmore » diesel fuel, roof bolts for safety, ammonium nitrate for explosives, and a continuing supply of machinery and replacement parts. (MCW)« less

Study on Reuse Strategy of Abandoned Industrial Square - in the case of Jingxi Wang Ping Coal Mine

NASA Astrophysics Data System (ADS)

Li, Xiaodan; Chen, Zhiting; Jia, Lijun; Wu, Wei; Zhang, Hailiang; Ma, Tianyi; Wang, Tao

2018-06-01

Wangping Coal Mine, whose industrial heritage is of great value, was one of the eight coal mines in Beijing. A large number of field surveys and analysis of the abandoned industrial facilities of Wangping Coal Mine were carried out in this paper. From the perspective of protecting industrial heritage culture and sustainable development, this paper studies the ideas and strategies for reusing the abandoned facilities of the Wangping Coal Mine. In order to protect its industrial heritage as much as possible, it is suggested to reuse the industrial square of Wangping Coal Mine as a community park.

The Empirical Relationship between Mining Industry Development and Environmental Pollution in China

PubMed Central

Li, Gerui; Lei, Yalin; Ge, Jianping; Wu, Sanmang

2017-01-01

This study uses a vector autoregression (VAR) model to analyze changes in pollutants among different mining industries and related policy in China from 2001 to 2014. The results show that: (1) because the pertinence of standards for mining waste water and waste gas emissions are not strong and because the maximum permissible discharge pollutant concentrations in these standards are too high, ammonia nitrogen and industrial sulfur dioxide discharges increased in most mining industries; (2) chemical oxygen demand was taken as an indicator of sewage treatment in environmental protection plans; hence, the chemical oxygen demand discharge decreased in all mining industries; (3) tax reduction policies, which are only implemented in coal mining and washing and extraction of petroleum and natural gas, decreased the industrial solid waste discharge in these two mining industries. PMID:28257126

Feasibility of Applying Clean Development Mechanism and GHGs Emission Reductions in the Gold Mining Industry: A Case of Thailand

NASA Astrophysics Data System (ADS)

Kittipongvises, Suthirat

2015-12-01

There is presently overwhelming scientific consensus that global climate change is indeed occurring, and that human activities are the primary driver. An increasingly resource and carbon constrained world will continue to pose formidable challenges to major industries, including mining. Understanding the implications of climate change mitigation for the mining industry, however, remains limited. This paper presents the results of a feasibility study on the implementation of a clean development mechanism and greenhouse gases (GHGs) emission reductions in the gold mining industry. It draws upon and extends the analysis of a case study conducted on gold mining operations in Thailand. The results from the case study indicated that total GHGs emissions by company A were approximately 36,886 tons carbon dioxide equivalents (tCO2e) per annual gold production capacity that meet the eligibility criteria for small-scaled clean development mechanism (CDM) projects. The electrostatic separation process was found to release the lowest amount of GHGs, whereas comminution (i.e. crushing and grinding) generated the highest GHGs emissions. By scope, the emission from purchased electricity (scope 2) is the most significant source. Opportunities for CDM projects implementation in the gold mining sector can be found in employing energy efficiency measures. Through innovation, some technical efficiency and technological development in gold processing (i.e. high pressure grinding rolls (HPGR), vertical roller mills (VRM), gravity pre-concentration and microwave heating technologies) that have the potential to reduce energy use and also lower carbon footprint of the gold mining were further discussed. The evidence reviews found that HPGR and VRM abatement technologies have shown energy and climate benefits as electricity savings and CO2 reduction of about 8-25.93 kWh/ton ore processed and 1.8-26.66 kgCO2/ton ore processed, respectively. Implications for further research and practice were finally raised.

Utility of hyperspectral imagers in the mining industry: Italy's gypsum reserves

NASA Astrophysics Data System (ADS)

Wilson, Janette H.; Greenberger, Rebecca N.

2014-05-01

The mining industry is plagued with socioeconomic and safety roadblocks with not many solutions in the midst of a demanding market. As more and more geologic research using hyperspectral technology has been performed, along with an affordable price point for commercial use of hyperspectral technology, the benefits of hyperspectral imaging to the mining industry has become apparent. This study identifies the key areas of use for hyperspectral imaging in the mining industry through a case study of gypsum mine samples obtained from a mine in central Tuscany.

Development of industrial minerals in Colorado

USGS Publications Warehouse

Arbogast, Belinda F.; Knepper, Daniel H.; Langer, William H.; Cappa, James A.; Keller, John W.; Widmann, Beth L.; Ellefsen, Karl J.; Klein, Terry L.; Lucius, Jeffrey E.; Dersch, John S.

2011-01-01

Technology and engineering have helped make mining safer and cleaner for both humans and the environment. Inevitably, mineral development entails costs as well as benefits. Developing a mine is an environmental, engineering, and planning challenge that must conform to many Federal, State, and local regulations. Community collaboration, creative design, and best management practices of sustainability and biodiversity can be positive indicators for the mining industry. A better understanding of aesthetics, culture, economics, geology, climate, vegetation and wildlife, topography, historical significance, and regional land planning is important in resolving land-use issues and managing mineral resources wisely. Ultimately, the consuming public makes choices about product use (including water, food, highways, housing, and thousands of other items) that influence operations of the mineral industry. Land planners, resource managers, earth scientists, designers, and public groups have a responsibility to consider sound scientific information, society's needs, and community appeals in making smart decisions concerning resource use and how complex landscapes should change. An effort to provide comprehensive geosciences data for land management agencies in central Colorado was undertaken in 2003 by scientists of the U.S. Geological Survey and the Colorado Geological Survey. This effort, the Central Colorado Assessment Project, addressed a variety of land-use issues: an understanding of the availability of industrial and metallic rocks and minerals, the geochemical and environmental effects of historic mining activity on surface water and groundwater, and the geologic controls on the availability and quality of groundwater. The USDA Forest Service and other land management agencies have the opportunity to contribute to the sustainable management of natural aggregate and other mineral resources through the identification and selective development of mineral resources and the reclamation of mines on lands that they administer. The information in this Circular will help them carry out that task.

The History of the Coal Mining Industry and Mining Accidents in the World and Turkey

PubMed Central

Atalay, Figen

2015-01-01

Three per thousand of the world’s coal reserves and 2% of lignite reserves exist in Turkey. Coal mining is the highest ranking industry for accidents and deaths per capita. For this reason, continuous monitoring and more attention should be gıven to the mining industry. In this review, the basic statistical data related to Turkey’s mining and mining disasters are summarized. PMID:29404107

Avenue for integrating geoethics into the working world.

NASA Astrophysics Data System (ADS)

Boon, Jan

2017-04-01

GeoEthics is a young field and is taking shape through events such as the International Declaration on GeoEthics (2011) and conference sessions held since 2013 (http://www.geoethics.org/events). Many of these focused on the geoscience community and had an academic or educational focus. While interest in the subject is growing, the number of participants is still low as compared to that of other geoscience disciplines. The author has found it difficult to generate interest in the formal inclusion of geoethics and the related fields of social and environmental responsibility into university geoscience curricula. This paper proposes to link geoethics to the huge effort that has been under way over the past decade and a half in the extractive industries to develop industry-wide codes that facilitate and structure the introduction of social and environmental responsibility into company operations. All of these codes contain specific references to ethics. The paper builds on two well-developed codes: "e3 Plus - A Framework or Responsible Exploration" (Prospectors and Developers Association of Canada) and "Towards Sustainable Mining" (Mining Association of Canada) to propose an overall practical reference frame for geoethics that may facilitate the transfer of geoethicists' work into daily practice in the extractive industries.

Chapter J: Issues and challenges in the application of geostatistics and spatial-data analysis to the characterization of sand-and-gravel resources

USGS Publications Warehouse

Hack, Daniel R.

2005-01-01

Sand-and-gravel (aggregate) resources are a critical component of the Nation's infrastructure, yet aggregate-mining technologies lag far behind those of metalliferous mining and other sectors. Deposit-evaluation and site-characterization methodologies are antiquated, and few serious studies of the potential applications of spatial-data analysis and geostatistics have been published. However, because of commodity usage and the necessary proximity of a mine to end use, aggregate-resource exploration and evaluation differ fundamentally from comparable activities for metalliferous ores. Acceptable practices, therefore, can reflect this cruder scale. The increasing use of computer technologies is colliding with the need for sand-and-gravel mines to modernize and improve their overall efficiency of exploration, mine planning, scheduling, automation, and other operations. The emergence of megaquarries in the 21st century will also be a contributing factor. Preliminary research into the practical applications of exploratory-data analysis (EDA) have been promising. For example, EDA was used to develop a linear-regression equation to forecast freeze-thaw durability from absorption values for Lower Paleozoic carbonate rocks mined for crushed aggregate from quarries in Oklahoma. Applications of EDA within a spatial context, a method of spatial-data analysis, have also been promising, as with the investigation of undeveloped sand-and-gravel resources in the sedimentary deposits of Pleistocene Lake Bonneville, Utah. Formal geostatistical investigations of sand-and-gravel deposits are quite rare, and the primary focus of those studies that have been completed is on the spatial characterization of deposit thickness and its subsequent effect on ore reserves. A thorough investigation of a gravel deposit in an active aggregate-mining area in central Essex, U.K., emphasized the problems inherent in the geostatistical characterization of particle-size-analysis data. Beyond such factors as common drilling methods jeopardizing the accuracy of the size-distribution curve, the application of formal geostatistical principles has other limitations. Many of the variables used in evaluating gravel deposits, including such sedimentologic parameters as sorting and such United Soil Classification System parameters as gradation coefficient, are nonadditive. Also, uniform sampling methods, such as drilling, are relatively uncommon, and sampling is generally accomplished by a combination of boreholes, water-well logs, test pits, trenches, stratigraphic columns from exposures, and, possibly, some geophysical cross sections. When evaluated in consideration of the fact that uniform mining blocks are also uncommon in practice, subsequent complexities in establishment of the volume/variance relation are inevitable. Several approaches exist to confront the limitations of geostatistical methods in evaluating sand-and-gravel deposits. Initially, we must acknowledge the practical requirements of the aggregate industry, as well as the limitations of the data collected by that industry, as a function of what the industry requires at the practical level, and consider that broader acceptance of formal geostatistics may require modifications of typical exploration and sampling protocols. Future investigations should utilize data from the full spectrum of sand-and-gravel deposits (flood plain, glacial, catastrophic flood, and marine), integrate such other disci plines as sedimentology and geophysics into the research, develop commodity-specific approaches to nonadditive variables, and include the results of comparative drilling.

Realising the knowledge spiral in healthcare: the role of data mining and knowledge management.

PubMed

Wickramasinghe, Nilmini; Bali, Rajeev K; Gibbons, M Chris; Schaffer, Jonathan

2008-01-01

Knowledge Management (KM) is an emerging business approach aimed at solving current problems such as competitiveness and the need to innovate which are faced by businesses today. The premise for the need for KM is based on a paradigm shift in the business environment where knowledge is central to organizational performance . Organizations trying to embrace KM have many tools, techniques and strategies at their disposal. A vital technique in KM is data mining which enables critical knowledge to be gained from the analysis of large amounts of data and information. The healthcare industry is a very information rich industry. The collecting of data and information permeate most, if not all areas of this industry; however, the healthcare industry has yet to fully embrace KM, let alone the new evolving techniques of data mining. In this paper, we demonstrate the ubiquitous benefits of data mining and KM to healthcare by highlighting their potential to enable and facilitate superior clinical practice and administrative management to ensue. Specifically, we show how data mining can realize the knowledge spiral by effecting the four key transformations identified by Nonaka of turning: (1) existing explicit knowledge to new explicit knowledge, (2) existing explicit knowledge to new tacit knowledge, (3) existing tacit knowledge to new explicit knowledge and (4) existing tacit knowledge to new tacit knowledge. This is done through the establishment of theoretical models that respectively identify the function of the knowledge spiral and the powers of data mining, both exploratory and predictive, in the knowledge discovery process. Our models are then applied to a healthcare data set to demonstrate the potential of this approach as well as the implications of such an approach to the clinical and administrative aspects of healthcare. Further, we demonstrate how these techniques can facilitate hospitals to address the six healthcare quality dimensions identified by the Committee for Quality Healthcare.

An Indigenous View of North America.

ERIC Educational Resources Information Center

LaDuke, Winona

1998-01-01

Uses stories of U.S. and Canadian indigenous individuals who defended their lands against uranium mining and hydroelectric development to contrast the thinking of indigenous people (natural law as pre-eminent, spiritual practice, intergenerational residency in the same place) with industrial thinking (man's dominion over nature, linear thinking,…

Heavy equipment maintenance wastes and environmental management in the mining industry.

PubMed

Guerin, Turlough F

2002-10-01

Maintenance wastes, if not managed properly, represent significant environmental issues for mining operations. Petroleum hydrocarbon liquid wastes were studied at an Australian site and a review of the literature and technology vendors was carried out to identify oil/water separation technologies. Treatment technologies and practices for managing oily wastewater, used across the broader mining industry in the Asia-Pacific region, were also identified. Key findings from the study were: (1) primary treatment is required to remove grease oil contamination and to protect secondary oily wastewater treatment systems from being overloaded; (2) selection of an effective secondary treatment system is dependent on influent oil droplet size and concentration, suspended solids concentration, flow rates (and their variability), environmental conditions, maintenance schedules and effectiveness, treatment targets and costs; and (3) oily wastewater treatment systems, based on mechanical separation, are favoured over those that are chemically based, as they simplify operational requirements. Source reduction, through housekeeping, equipment and reagent modifications, and segregation and/or consolidation of hydrocarbon waste streams, minimizes treatment costs, safety and environmental impact.

The research of distributed interactive simulation based on HLA in coal mine industry inherent safety

NASA Astrophysics Data System (ADS)

Dou, Zhi-Wu

2010-08-01

To solve the inherent safety problem puzzling the coal mining industry, analyzing the characteristic and the application of distributed interactive simulation based on high level architecture (DIS/HLA), a new method is proposed for developing coal mining industry inherent safety distributed interactive simulation adopting HLA technology. Researching the function and structure of the system, a simple coal mining industry inherent safety is modeled with HLA, the FOM and SOM are developed, and the math models are suggested. The results of the instance research show that HLA plays an important role in developing distributed interactive simulation of complicated distributed system and the method is valid to solve the problem puzzling coal mining industry. To the coal mining industry, the conclusions show that the simulation system with HLA plays an important role to identify the source of hazard, to make the measure for accident, and to improve the level of management.

WHAT INNOVATIVE APPROACHES CAN BE DEVELOPED FOR MINING SITES?

EPA Science Inventory

Mining is essential to maintain our way of life. However, based upon industry's reporting in the most recent Toxic Release Inventory (TRI), the primary sources of heavy metal releases to the environment are mining and mining related activities. The hard rock mining industry rel...

Machine-related injuries in the US mining industry and priorities for safety research.

PubMed

Ruff, Todd; Coleman, Patrick; Martini, Laura

2011-03-01

Researchers at the National Institute for Occupational Safety and Health studied mining accidents that involved a worker entangled in, struck by, or in contact with machinery or equipment in motion. The motivation for this study came from the large number of severe accidents, i.e. accidents resulting in a fatality or permanent disability, that are occurring despite available interventions. Accident descriptions were taken from an accident database maintained by the United States Department of Labor, Mine Safety and Health Administration, and 562 accidents that occurred during 2000-2007 fit the search criteria. Machine-related accidents accounted for 41% of all severe accidents in the mining industry during this period. Machinery most often involved in these accidents included conveyors, rock bolting machines, milling machines and haulage equipment such as trucks and loaders. The most common activities associated with these accidents were operation of the machine and maintenance and repair. The current methods to safeguard workers near machinery include mechanical guarding around moving components, lockout/tagout of machine power during maintenance and backup alarms for mobile equipment. To decrease accidents further, researchers recommend additional efforts in the development of new control technologies, training materials and dissemination of information on best practices.

Provincial geology and the Industrial Revolution.

PubMed

Veneer, Leucha

2006-06-01

In the early nineteenth century, geology was a new but rapidly growing science, in the provinces and among the gentlemen scientists of London, Oxford and Cambridge. Industry, particularly mining, often motivated local practical geologists, and the construction of canals and railways exposed the strata for all to see. The most notable of the early practical men of geology was the mineral surveyor William Smith; his geological map of England and Wales, published in 1815, was the first of its kind. He was not alone. The contributions of professional men, and the provincial societies with which they were connected, are sometimes underestimated in the history of geology.

SEASAT economic assessment. Volume 4: Ocean mining case study and generalization. [economic benefits of SEASAT satellites for mineral exploration

NASA Technical Reports Server (NTRS)

1975-01-01

The results of a study of the weather sensitive features of near shore and deep water ocean mining industries are described. Problems with the evaluation of economic benefits for the deep water ocean mining industry are attributed to the relative immaturity and highly proprietary nature of the industry. Case studies on the gold industry, diamond industry, tin industry and sand and gravel industry are cited.

State summaries: Oklahoma

USGS Publications Warehouse

Krukowski, S.T.

2006-01-01

In 2005, Oklahoma mines produced both industrial minerals and coal. No metals were mined in the state. Based on value, leading industrial minerals include crushed stone followed by cement, construction sand and gravel, industrial sand and gravel, iodine and gypsum. The Oklahoma Department of Mines (ODOM) reported that more than 343 mine operators produced nonfuel minerals from 405 mines in the state. However, 530 mining permitted sites were on file. The Oklahoma Miner Training Institute (OMTI) held 239 classes for 33,768 classroom hours of instruction, in which 84 coal miners and 4,587 metal/nonmetal miners were trained.

76 FR 4469 - Privacy Act of 1974; Report of Modified or Altered System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

... Records, 09-20-0153, ``Mortality Studies in Coal Mining, Metal and Non-metal Mining and General Industry... Coal Mining, Metal and Non-metal Mining and General Industry, HHS/CDC/NIOSH.'' The purpose of this... Occupational Safety and Health (NIOSH) Mortality Studies in Coal Mining, Metal and Non-Metal Mining and General...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chironis, N.P.

This book contains a wealth of valuable information carefully selected and compiled from recent issues of Coal Age magazine. Much of the source material has been gathered by Coal Age Editors during their visits to coal mines, research establishments, universities and technical symposiums. Equally important are the articles and data contributed by over 50 top experts, many of whom are well known to the mining industry. Specifically, this easy-to-use handbook is divided into eleven key areas of underground mining. Here you will find the latest information on continuous mining techniques, longwall and shortwall methods and equipment, specialized mining and boringmore » systems, continuous haulage techniques, improved roof control and ventilation methods, mine communications and instrumentation, power systems, fire control methods, and new mining regulations. There is also a section on engineering and management considerations, including the modern use of computer terminals, practical techniques for picking leaders and for encouraging more safety consciousness in employees, factors affecting absenteeism, and some highly important financial considerations. All of this valuable information has been thoroughly indexed to provide immediate access to the specific data needed by the reader.« less

Prognostics and Health Management of Wind Turbines -- Current Status and Future Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheng, Shuangwen

The global wind industry has seen tremendous growth during the past two decades. However, the industry is challenged by premature component failures, which lead to increased turbine downtime and subsequently, cost of energy for wind power. To mitigate the impacts from these failures, the wind industry has been exploring various areas for improvements ranging from product design, new materials or lubricants, to operation and maintenance (O&M) practices. Condition-based maintenance or prognostics and health management (PHM) has been explored as one enabling technology for improving O&M practices. This chapter provides a brief overview of wind turbine PHM with a focus onmore » operational data mining and condition monitoring of drivetrains. Some future research and development opportunities in wind turbine PHM are also briefly discussed.« less

Total Factor Productivity Growth, Technical Progress & Efficiency Change in Vietnam Coal Industry - Nonparametric Approach

NASA Astrophysics Data System (ADS)

Phuong, Vu Hung

2018-03-01

This research applies Data Envelopment Analysis (DEA) approach to analyze Total Factor Productivity (TFP) and efficiency changes in Vietnam coal mining industry from 2007 to 2013. The TFP of Vietnam coal mining companies decreased due to slow technological progress and unimproved efficiency. The decadence of technical efficiency in many enterprises proved that the coal mining industry has a large potential to increase productivity through technical efficiency improvement. Enhancing human resource training, technology and research & development investment could help the industry to improve efficiency and productivity in Vietnam coal mining industry.

Oil Industry, Solar Energy Industry, and Mining Occupations. Curriculum for Petroleum, Mining and Solar Energy Secretaries. July 1, 1977-June 30, 1978.

ERIC Educational Resources Information Center

Martinez, Gloria E.

This document is a packet of instructional materials for training secretaries and clerks for the petroleum, mining, and solar energy fields. Developed by Eastern New Mexico University and the New Mexico State Department of Vocational Education, and aimed at New Mexico industry, the curriculum is divided into three units of petroleum, mining, and…

Use of IT platform in determination of efficiency of mining machines

NASA Astrophysics Data System (ADS)

Brodny, Jarosław; Tutak, Magdalena

2018-01-01

Determination of effective use of mining devices has very significant meaning for mining enterprises. High costs of their purchase and tenancy cause that these enterprises tend to the best use of possessed technical potential. However, specifics of mining production causes that this process not always proceeds without interferences. Practical experiences show that determination of objective measure of utilization of machine in mining enterprise is not simple. In the paper a proposition for solution of this problem is presented. For this purpose an IT platform and overall efficiency model OEE were used. This model enables to evaluate the machine in a range of its availability performance and quality of product, and constitutes a quantitative tool of TPM strategy. Adapted to the specificity of mining branch the OEE model together with acquired data from industrial automatic system enabled to determine the partial indicators and overall efficiency of tested machines. Studies were performed for a set of machines directly use in coal exploitation process. They were: longwall-shearer and armoured face conveyor, and beam stage loader. Obtained results clearly indicate that degree of use of machines by mining enterprises are unsatisfactory. Use of IT platforms will significantly facilitate the process of registration, archiving and analytical processing of the acquired data. In the paper there is presented methodology of determination of partial indices and total OEE together with a practical example of its application for investigated machines set. Also IT platform was characterized for its construction, function and application.

"Working" Culture: Exploring Notions of Workplace Culture and Learning at Work

ERIC Educational Resources Information Center

Somerville, Margaret

2005-01-01

This article is based on research into the practical problem of masculinity and learning and practising safety in the mining industry. The research began with a post-structural analysis of gendered subjectivity in miners' yarns but argues that a concept of "culture" is needed to elucidate a middle-level relationship between individual…

76 FR 589 - Proposed Extension of Existing Information Collection; Mine Accident, Injury, Illness, Mine...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-05

... safety efforts of MSHA and the mining industry. Accident, injury, and illness data, when correlated with... requested data can be provided in the desired format, reporting burden (time and financial resources) is... provides for uniform information gathering across the mining industry. Section 50.30 requires mine...

New approach for reduction of diesel consumption by comparing different mining haulage configurations.

PubMed

Rodovalho, Edmo da Cunha; Lima, Hernani Mota; de Tomi, Giorgio

2016-05-01

The mining operations of loading and haulage have an energy source that is highly dependent on fossil fuels. In mining companies that select trucks for haulage, this input is the main component of mining costs. How can the impact of the operational aspects on the diesel consumption of haulage operations in surface mines be assessed? There are many studies relating the consumption of fuel trucks to several variables, but a methodology that prioritizes higher-impact variables under each specific condition is not available. Generic models may not apply to all operational settings presented in the mining industry. This study aims to create a method of analysis, identification, and prioritization of variables related to fuel consumption of haul trucks in open pit mines. For this purpose, statistical analysis techniques and mathematical modelling tools using multiple linear regressions will be applied. The model is shown to be suitable because the results generate a good description of the fuel consumption behaviour. In the practical application of the method, the reduction of diesel consumption reached 10%. The implementation requires no large-scale investments or very long deadlines and can be applied to mining haulage operations in other settings. Copyright © 2016 Elsevier Ltd. All rights reserved.

[Characterization of severe acute occupational poisoning accidents related to asphyxiating gases in China between 1989 and 2003].

PubMed

Zhang, Min; Li, Tao; Wang, Huan-Qiang; Wang, Hong-Fei; Chen, Shu-Yang; Du, Xie-Yi; Qin, Jian; Zhang, Shuang; Ji, Li-Ying

2006-12-01

To analyze severe acute occupational poisoning accidents related to asphyxiating gases reported in China between 1989 and 2003, and to study the characteristics of severe acute occupational poisoning accidents and provide scientific evidences for prevention and control strategies. The data from the national occupational poisoning case reporting system were analyzed with descriptive methods. (1) There were 273 severe acute occupational poisoning accidents related to asphyxiating gases for 15 years with 1638 workers poisoned and 600 workers died, which accounted for 53.95% in total accidents and 35.17% of workers poisoned and 78.64% of workers died of all severe acute occupational poisoning accidents. The average poisoning age was (33.8 +/- 9.7) years old and the average death age was (36.6 +/- 10.0) years old. (2) Most of the accidents were caused by hydrogen sulfide, carbon monoxide and carbon dioxide respectively, and mainly occurred in chemical industry, mining, water disposal industry, paper making industry and brewing industry. The risk was higher in some jobs than others, such as cleanout, machine maintenance and repair, production, mine and digging. The poisoning accidents occurred more frequently from April to September each year and occurred in the confined space, in the basement and the mine, and workers died of poisoning mostly were men. (1) The severe acute occupational poisoning accidents related to asphyxiating gases are more dangerous than others. (2) The control of poisoning accidents related to hydrogen sulfide, carbon monoxide and carbon dioxide, which occurred easily in the confined space, should be paid more attention to, and good work practice should be developed on some posts, such as digging, cleanout, dredge, machine maintenance and repair and mine.

76 FR 4466 - Privacy Act of 1974; Report of Modified or Altered System of Records

Federal Register 2010, 2011, 2012, 2013, 2014

2011-01-25

... Records, 09-20-0149, ``Morbidity Studies in Coal Mining, Metal and Non-metal Mining and General Industry... Coal Mining, Metal and Non-metal Mining and General Industry, HHS/CDC/NIOSH.'' The purpose of this... Institute for Occupational Safety And Health (NIOSH) Morbidity Studies in Coal Mining, Metal and Non-Metal...

Does the resources sector have higher suicide rates? A comparative analysis of suicide rates among men in the mining industry and other occupations, in Queensland (Australia).

PubMed

McPhedran, Samara

2015-06-05

Australia is one of the world's foremost mining nations. Over the past decade, the number of resources sector employees has risen steadily. It is increasingly suggested in lay press and popular discourse that mining industry employees (the majority of whom are men) face an elevated risk of suicide relative to the general population, and that suicide rates are higher among mining industry employees relative to other occupations. However, there has been no empirical evaluation of this proposal, which impedes the ability to develop appropriate policy responses. This study begins to fill knowledge gaps, by providing the first quantitative examination of suicide rates in the mining industry. Data from the Queensland Suicide Register were used to examine suicide rates in the resources sector, relative to other sectors. The mining industry was found to have lower male suicide rates relative to other occupations and the working-age male population overall. These findings do not support the view that mining industry employment is necessarily associated with elevated suicide rates. Many factors, ranging from individual personality characteristics through to workplace policies, may contribute to this observation.

Sustainable gold mining management waste policy in Romania

NASA Astrophysics Data System (ADS)

Tudor, Elena; Filipciuc, Constantina

2016-04-01

Sustainable mining practices and consistent implementation of the mining for the closure planning approach, within an improved legislative framework, create conditions for the development of creative, profitable, environmentally-sound and socially-responsible management and reuse of mine lands. According to the World Commission on Environment and Development definition, sustainable development is the type of development that meets the needs of the present without compromising the ability of future generations to meet their own needs. Romania has the largest gold reserves in Europe (760 million tons of gold-silver ores, of which 40 million tons in 68 gold deposits in the Apuseni Mountains. New mining projects draw particular attention regarding the environmental risks they cause. Rehabilitation is an ongoing consideration throughout the mine's lifecycle, both from a technical and a financial standpoint. The costs of land rehabilitation are classified as the mine's operating costs. According to Directive 2004/35/EC on environmental liability, the prevention and remedying of environmental damage should be implemented by applying the "polluter pays" principle, in line with the principle of sustainable development. Directive on the management of waste from extractive industries and amending Directive obliges operators to provide (and periodically adjust in size) a financial guarantee for waste facility maintenance and post-closure site restoration, including land rehabilitation. According to the Romanian Mining Law, the license holder has the following obligations related to land use and protection: to provide environmental agreements as one of the prerequisites for a building permit; to regularly update the mine closure plan; to set up and maintain the financial guarantee for environmental rehabilitation; and to execute and finalize the environmental rehabilitation of affected land in the mining site, according to the mine closure plan, including the post-closure monitoring program implementation and financing. Apart from the Mining Law, the Government Decision, which transposes EU Directive on the management of waste from extractive industries, as well as Government Emergency Ordinance, which implements the requirements of EU Directive 2004/35/CE on environmental liability, requests financial guarantees for waste facilities maintenance and for environment restoration in the case of pollution, respectively. In practice, there are problems in the calculation of the financial guarantee and the development of financial security instruments and markets as required by Directive, due to the lack of expertise in financial, economic and liability matters. Mining companies are usually not required to set up a special guarantee for the waste facilities, but only to set up and maintain the financial guarantee regulated under the Mining Law. Romania - because of the structure of its mining sector - has serious environmental legacies, a lack of funds for their restoration and the need to strengthen the administrative capacity in this area, as well as the important tasks on harmonization and/or implementation of the EU mining waste legislation. This work is presented within the framework of SUSMIN project. Key words : sustainable development, waste management, policy

Mine to market: The legal issues

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1985-01-01

The movement of mineral products from mine to market is the fundamental objective of every mining enterprise. However, the difficult and recurring legal problems encountered in these activities have been overlooked by legal scholars, and little literature is available. The manual from the Foundation's Special Institute on Mine to Market: The Legal Issues is intended to help cure this deficiency, and will be invaluable to individuals involved in any phase of the production and sale or purchase of minerals - from negotiating an initial lease to preparing an agreement for the purchase or sale of a refined product. Included inmore » the manual are discussions of: the mining process - from severance to saleable product; marketing strategy and the lawyer - methods of selling and hedging used in the mining industry; metal markets and pricing mechanisms; the impact of the uniform commercial code on contracts for the sale of minerals and other goods; contracts for the international sale of minerals; countertrade - commercial practices, legal issues, and policy dilemmas; commercial impracticability in mineral transactions; price and payment terms in mineral agreements; and mineral sales and processing agreements.« less

Sustainable Mineral-Intensive Growth in Odisha, India

NASA Astrophysics Data System (ADS)

Nayak, S.

2012-04-01

The focus of the work is to highlight the present environmental and social impacts of extensive mining on the health of the common people of Odisha. The mining activities have created havoc impact to the environment and social life of the state. Odisha has huge deposits of ores and minerals of chromite, nickel, bauxite, iron, coal, copper, manganese, graphite, vanadium etc. The mining activities have encouraged rapid urbanization and at the same time have altered the topography of these areas and extensively degraded the forest land. For long term sustainable development of the society, it is necessary to take a balanced and integrated approach towards environmental protection and economic advancement. Industries should aim at achieving their goals, through a system of permits based on best available techniques, which gives emphasis on integrated prevention and control of consumption of energy and water as well as pollution of water, air and soil. The rapid industrial growth has brought promising opportunities for economic development and poverty reduction in Odisha but at the same time has caused extensive environmental degradation. The best management practices to deal with environmental and social impacts on mineral-intensive growth are suggested in this work. In addition to lean technology, economic implications of the introduction of environmental technologies for mining activities are also discussed.

Sociocultural and institutional drivers and constraints to mineral supply; the meaning of scarcity in the 21st century: drivers and constraints to the supply of minerals using regional, national and global perspectives

USGS Publications Warehouse

Brown, William M.

2002-01-01

The sociocultural dimensions of mineral supply at the outset of the 21st century are making the supply process increasingly complex. The dimensions encompass legal, financial, environmental, cultural, and global implications of mining, and are driving unprecedented change in the way minerals supply will be accomplished in the future. Minerals scarcity on a global scale is subordinate to other societal issues about mineral resources and reserves estimated to meet society's demands for decades to centuries in the future. This report reviews historical and present-day sociocultural drivers of change, and reactions of the minerals industry to these drivers. It is reflective primarily of conditions in the United States, but also uses examples from other countries. It expresses viewpoints on sociocultural drivers as seen by constituents of the minerals industry and several other communities of interest including Aboriginal peoples, non-government organizations; labor; mining-dependent communities; mining-affected communities; researchers; and government (federal, state/provincial, and local). It provides overviews of the demand for minerals in the United States, and the status of land available for mining. The report uses a case study of a metals mining project in Wisconsin to illustrate specific sociocultural drivers and constraints to minerals supply, and how these influence the minerals industry. Over the past 150 years, a progression of sociocultural movements under the headings of conservationism, environmentalism, and sustainable development have nurtured societal values that have come to influence the mineral supply process in important ways. These movements reflect a continuing tension between the demand for minerals and other resources, and the simultaneous demand for aesthetic, spiritual, ecological, cultural, and other attributes of the land. The tension is an important element in current international debates about the meaning and future of sustainable development. This report focuses on some of the social challenges to the minerals industry to supply minerals, while at the same time providing environmental protection, economic growth, and sociocultural acceptance. All these issues fall under the rubric of sustainable development. It also describes current industry responses to sustainability, including the Global Mining Initiative (2001a), an attempt to introduce major changes in global industry practices to begin the 21st century. This report complements other documents in the series on physical supply, technological advancement, and economic and policy drivers (Wilburn and others, 2001).

Metal Separations and Recovery in the Mining Industry

NASA Astrophysics Data System (ADS)

Izatt, Steven R.; Bruening, Ronald L.; Izatt, Neil E.

2012-11-01

Molecular Recognition Technology (MRT) plays an important role in the hydrometallurgical processing dissolved entities in solutions in the mining industry. The status of this industry with respect to sustainability and environmental issues is presented and discussed. The roles of MRT and ion exchange in metal separation and recovery processes in the mining industry are discussed and evaluated. Examples of MRT separation processes of interest to the mining community are given involving gold, cobalt purification by extraction of trace cadmium, rhenium, and platinum group metals (PGMs). MRT processes are shown to be sustainable, economically viable, energy efficient, and environmentally friendly, and to have a low carbon footprint.

Research on Occupational Safety, Health Management and Risk Control Technology in Coal Mines.

PubMed

Zhou, Lu-Jie; Cao, Qing-Gui; Yu, Kai; Wang, Lin-Lin; Wang, Hai-Bin

2018-04-26

This paper studies the occupational safety and health management methods as well as risk control technology associated with the coal mining industry, including daily management of occupational safety and health, identification and assessment of risks, early warning and dynamic monitoring of risks, etc.; also, a B/S mode software (Geting Coal Mine, Jining, Shandong, China), i.e., Coal Mine Occupational Safety and Health Management and Risk Control System, is developed to attain the aforementioned objectives, namely promoting the coal mine occupational safety and health management based on early warning and dynamic monitoring of risks. Furthermore, the practical effectiveness and the associated pattern for applying this software package to coal mining is analyzed. The study indicates that the presently developed coal mine occupational safety and health management and risk control technology and the associated software can support the occupational safety and health management efforts in coal mines in a standardized and effective manner. It can also control the accident risks scientifically and effectively; its effective implementation can further improve the coal mine occupational safety and health management mechanism, and further enhance the risk management approaches. Besides, its implementation indicates that the occupational safety and health management and risk control technology has been established based on a benign cycle involving dynamic feedback and scientific development, which can provide a reliable assurance to the safe operation of coal mines.

Research on Occupational Safety, Health Management and Risk Control Technology in Coal Mines

PubMed Central

Zhou, Lu-jie; Cao, Qing-gui; Yu, Kai; Wang, Lin-lin; Wang, Hai-bin

2018-01-01

This paper studies the occupational safety and health management methods as well as risk control technology associated with the coal mining industry, including daily management of occupational safety and health, identification and assessment of risks, early warning and dynamic monitoring of risks, etc.; also, a B/S mode software (Geting Coal Mine, Jining, Shandong, China), i.e., Coal Mine Occupational Safety and Health Management and Risk Control System, is developed to attain the aforementioned objectives, namely promoting the coal mine occupational safety and health management based on early warning and dynamic monitoring of risks. Furthermore, the practical effectiveness and the associated pattern for applying this software package to coal mining is analyzed. The study indicates that the presently developed coal mine occupational safety and health management and risk control technology and the associated software can support the occupational safety and health management efforts in coal mines in a standardized and effective manner. It can also control the accident risks scientifically and effectively; its effective implementation can further improve the coal mine occupational safety and health management mechanism, and further enhance the risk management approaches. Besides, its implementation indicates that the occupational safety and health management and risk control technology has been established based on a benign cycle involving dynamic feedback and scientific development, which can provide a reliable assurance to the safe operation of coal mines. PMID:29701715

Environmental management in North American mining sector.

PubMed

Asif, Zunaira; Chen, Zhi

2016-01-01

This paper reviews the environmental issues and management practices in the mining sector in the North America. The sustainable measures on waste management are recognized as one of the most serious environmental concerns in the mining industry. For mining activities, it will be no surprise that the metal recovery reagents and acid effluents are a threat to the ecosystem as well as hazards to human health. In addition, poor air quality and ventilation in underground mines can lead to occupational illness and death of workers. Electricity usage and fuel consumption are major factors that contribute to greenhouse gases. On the other hand, many sustainability challenges are faced in the management of tailings and disposal of waste rock. This paper aims to highlight the problems that arise due to poor air quality and acid mine drainage. The paper also addresses some of the advantages and limitations of tailing and waste rock management that still have to be studied in context of the mining sector. This paper suggests that implementation of suitable environmental management tools like life cycle assessment (LCA), cleaner production technologies (CPTs), and multicriteria decision analysis (MCD) are important as it ultimately lead to improve environmental performance and enabling a mine to focus on the next stage of sustainability.

Ending on a positive: Examining the role of safety leadership decisions, behaviours and actions in a safety critical situation.

PubMed

Donovan, Sarah-Louise; Salmon, Paul M; Horberry, Timothy; Lenné, Michael G

2018-01-01

Safety leadership is an important factor in supporting safe performance in the workplace. The present case study examined the role of safety leadership during the Bingham Canyon Mine high-wall failure, a significant mining incident in which no fatalities or injuries were incurred. The Critical Decision Method (CDM) was used in conjunction with a self-reporting approach to examine safety leadership in terms of decisions, behaviours and actions that contributed to the incidents' safe outcome. Mapping the analysis onto Rasmussen's Risk Management Framework (Rasmussen, 1997), the findings demonstrate clear links between safety leadership decisions, and emergent behaviours and actions across the work system. Communication and engagement based decisions featured most prominently, and were linked to different leadership practices across the work system. Further, a core sub-set of CDM decision elements were linked to the open flow and exchange of information across the work system, which was critical to supporting the safe outcome. The findings provide practical implications for the development of safety leadership capability to support safety within the mining industry. Copyright © 2017 Elsevier Ltd. All rights reserved.

Research on Classification of Chinese Text Data Based on SVM

NASA Astrophysics Data System (ADS)

Lin, Yuan; Yu, Hongzhi; Wan, Fucheng; Xu, Tao

2017-09-01

Data Mining has important application value in today’s industry and academia. Text classification is a very important technology in data mining. At present, there are many mature algorithms for text classification. KNN, NB, AB, SVM, decision tree and other classification methods all show good classification performance. Support Vector Machine’ (SVM) classification method is a good classifier in machine learning research. This paper will study the classification effect based on the SVM method in the Chinese text data, and use the support vector machine method in the chinese text to achieve the classify chinese text, and to able to combination of academia and practical application.

New Forces at Work in Mining: Industry View of Critical Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peterson, D. J.; LaTourrette, Tom; Bartis, James T.

2007-04-01

RAND has just published a report entitled, "New Forces at Work in Mining: Industry Views of Critical Technologies," by D. J. Peterson, Tom LaTourrette, and James T. Bartis. The report presents the results of a series of in-depth discussions with leading mining industry representatives selected for their prominent position and their ability to think broadly about technology trends. The discussions highlighted the importance of collaborative technology research, development, and implementation strategies and the increasingly critical role of mine personnel in the utilization of new technologies.

The mine management professions in the twentieth-century Scottish coal mining industry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Perchard, A.

2007-07-01

This book seeks to redress the exclusion of colliery managers and other mining professionals from the history of British, and particularly Scottish, coal industries. This is accomplished by examining these groups within the most crucial period of their ascendancy in the Scottish coal mining industry, 1930-1966. This work seeks to place such persons within their context and to examine their roles, statuses and behaviours through their relationships with employees and the execution of their functions, also examining their terms and conditions of employment, the outlook of their professional associations, and that of their union. Through all this, Dr. Perchard illustratesmore » how this growing consciousness amongst managerial employees in the industry was accompanied by an intense public discussion, within the mining professions, over their future shape, principles and occupational standards.« less

Problems associated with noise measurements in the mining industry

NASA Astrophysics Data System (ADS)

Bauer, Eric R.; Vipperman, Jeffrey S.

2002-05-01

In response to the continuing problem of noise-induced hearing loss (NIHL) among mine workers, the National Institute for Occupational Safety and Health (NIOSH) has been conducting numerous noise- and hearing-loss research efforts in the mining industry. Research is underway to determine worker noise exposure, equipment noise, hearing loss and hearing protection use, and to evaluate engineering controls. Issues that are peculiar to the mining industry have complicated these efforts. A few of the issues that must be overcome to conduct meaningful research include constantly moving equipment, changing work environments, confined space, varying production rates, multiple noise sources, and electronic permissibility of instrumentation. This presentation will address the factors that affect the measurement and analysis of noise in the mining industry and how these factors are managed. In addition, some examples of research results will be included.

A Social Movements' Perspective on Human Rights Impact of Mining Liberalization in the Philippines.

PubMed

Aytin, Andrew

2016-02-01

When it comes to minerals like gold, copper, or nickel, the Philippines ranks among the world's richest countries, but it has continued to perform poorly in terms of human and economic development. In the belief that foreign investments will bring development, the government in 1995 liberalized its mining industry allowing full foreign ownership and control of the mining activities. After almost two decades of mining liberalization, the country has never achieved its goal of development but is now reeling from the adverse impacts of large-scale corporate mining on the environment and lives of mining-affected communities. Moreover, human rights violations against anti-mining activists and environmental advocates have escalated at an alarming rate making the country one of the most dangerous places for land and environmental defenders. But social movements are now taking big steps to empower the people, especially the mining-affected communities, to confront the adverse impacts of corporate mining and to reverse the current path of the mining industry to one that aims to achieve national industrialization where national development is prioritized over transnational corporations' interests. © The Author(s) 2016.

500 years of mercury production: global annual inventory by region until 2000 and associated emissions.

PubMed

Hylander, Lars D; Meili, Markus

2003-03-20

Since pre-industrial times, anthropogenic emissions of Hg have at least doubled global atmospheric Hg deposition rates. In order to minimize environmental and human health effects, efforts have been made to reduce Hg emissions from industries and power plants, while less attention has been paid to Hg mining. This paper is a compilation of available data on primary Hg production and associated emissions with regional and annual resolution since colonial times. Globally, approximately one million tons of metallic Hg has been extracted from cinnabar and other ores during the past five centuries, half already before 1925. Roughly half has been used for mining of gold and silver, but the annual Hg production peaked during a short period of recent industrial uses. Comparison with total historic Hg deposition from global anthropogenic emissions (0.1-0.2 Mtons) suggests that only a few percent of all mined Hg have escaped to the atmosphere thus far. While production of primary Hg has changed dramatically over time and among mines, the global production has always been dominant in the region of the mercuriferous belt between the western Mediterranean and central Asia, but appears to be shifting to the east. Roughly half of the registered Hg has been extracted in Europe, where Spanish mines alone have contributed one third of the world's mined Hg. Approximately one fourth has been mined in the Americas, and most of the remaining registered Hg in Asia. However, the Asian figures may be largely underestimated. Presently, the dominant Hg mines are in Almadén in Spain (236 t of Hg produced in 2000), Khaydarkan in Kyrgyzstan (550 t), Algeria (estimated 240 t) and China (ca. 200 t). Mercury by-production from mining of other metals (e.g. copper, zinc, gold, silver) in 2000 includes 48 t from Peru, 45 t from Finland and at least 15 t from the USA. Since 1970, the recorded production of primary Hg has been reduced by almost an order of magnitude to approximately 2000 t in the year 2000. Mining is thus still of similar magnitude as all current anthropogenic Hg emissions to the atmosphere, and mined Hg may account for more than one third of these emissions. Also before use, mercury is emitted from Hg mines locally during the mining and refining processes and from mining waste. Global direct emissions to the atmosphere amount to 10-30 t per year currently (up to 10 at Almadén alone), and probably exceed 10000 t historically. Termination of Hg mining will reduce associated local emissions to the atmosphere and biosphere. Since several economically viable Hg-free alternatives exist for practically all applications of Hg, the production and use of Hg can be further reduced and all primary production of Hg other than by-production terminated.

Data mining in pharma sector: benefits.

PubMed

Ranjan, Jayanthi

2009-01-01

The amount of data getting generated in any sector at present is enormous. The information flow in the pharma industry is huge. Pharma firms are progressing into increased technology-enabled products and services. Data mining, which is knowledge discovery from large sets of data, helps pharma firms to discover patterns in improving the quality of drug discovery and delivery methods. The paper aims to present how data mining is useful in the pharma industry, how its techniques can yield good results in pharma sector, and to show how data mining can really enhance in making decisions using pharmaceutical data. This conceptual paper is written based on secondary study, research and observations from magazines, reports and notes. The author has listed the types of patterns that can be discovered using data mining in pharma data. The paper shows how data mining is useful in the pharma industry and how its techniques can yield good results in pharma sector. Although much work can be produced for discovering knowledge in pharma data using data mining, the paper is limited to conceptualizing the ideas and view points at this stage; future work may include applying data mining techniques to pharma data based on primary research using the available, famous significant data mining tools. Research papers and conceptual papers related to data mining in Pharma industry are rare; this is the motivation for the paper.

ORD Technical Outreach and Support Activities on Sustainable Mining Applications

EPA Science Inventory

Hardrock mining has played a significant role in the development of economies, consumer products and defense in the United States from the start of industrialization. Currently, the industry continues to lay a critical role in the development of our country. Mining waste which ...

An 11-year-old boy with silico-tuberculosis attributable to secondary exposure to sandstone mining in central India

PubMed Central

Murlidhar, V

2015-01-01

Silicosis from secondary exposure is not often reported. This is the first such report of a child with possible silicosis attributable to secondary exposure to sandstone mining in India. Silicosis from secondary exposure has been reported in the gem polishing and slate pencil manufacturing industries in India; however, the stone-mining industry is severely under-researched. No preventive measures have been instituted in the stone-mining industry and children are exposed to respirable silica dust when their mothers take them to their work places. Poverty and lack of accessibility to modern medical facilities promote malnutrition and tuberculosis, two known co-morbid conditions. Stone mining, an export-oriented industry, produces billions of dollars of foreign currency every year. Although there is legislation to protect workers from exploitation, employers disregard the law and the state turns a blind eye by not implementing proper enforcement mechanisms. Silicosis from environmental exposure affects the entire community that lives in stone-mining areas. PMID:26106174

Socially Responsible Mining: the Relationship between Mining and Poverty, Human Health and the Environment

PubMed Central

Maier, Raina M.; Díaz-Barriga, Fernando; Field, James A.; Hopkins, James; Klein, Bern; Poulton, Mary M.

2016-01-01

Increasing global demand for metals is straining the ability of the mining industry to physically keep up with demand (physical scarcity). On the other hand, social issues including the environmental and human health consequences of mining as well as the disparity in income distribution from mining revenues are disproportionately felt at the local community level. This has created social rifts, particularly in the developing world, between affected communities and both industry and governments. Such rifts can result in a disruption of the steady supply of metals (situational scarcity). Here we discuss the importance of mining in relationship to poverty, identify steps that have been taken to create a framework for socially responsible mining, and then discuss the need for academia to work in partnership with communities, government, and industry to develop trans-disciplinary research-based step change solutions to the intertwined problems of physical and situational scarcity. PMID:24552962

Aircraft Mishap Fire Pattern Investigations

DTIC Science & Technology

1985-08-01

AD-AI61 094 AIRC1Arr WSWEA FlREg PATMEN INVESTIGATIONS . Joseph M. Kuchta Mining and industrial Cadre15143 Green latetrutiovalp 𔃻nco 54 Sewickley...ORGANIZATION REPORT NUMSER(S) AFWAL-TR-85-2057 6. NAME OF PERFORMING ORGANIZATION kb. OFFICE SYMBOL 7a. NAME OF MONITORING ORGANIZATION Mining and Industrial...IS OBSOLETE. Unc .assi fied SECURITY CLASSIFICATION OF THIS PAGE ( / FOREWARD This report was prepared by the Mining and Industrial Cadre of Green

[Effect of vibration, noise, physical exertion and unfavorable microclimate on carbohydrate metabolism in workers engaged into mining industry and machine building].

PubMed

Lapko, I V; Kir'iakov, V A; Antoshina, L I; Pavlovskaia, N A; Kondratovich, S V

2014-01-01

The authors studied influence of vibration, noise, physical overexertion and microclimate on carbohydrates metabolism and insulin resistance in metal mining industry workers. Findings are that vibration disease appeared to have maximal effect on insulin resistance test results and insulin level. The authors suggested biomarkers for early diagnosis of insulin resistance disorders in metal mining industry workers.

Assimilating Text-Mining & Bio-Informatics Tools to Analyze Cellulase structures

NASA Astrophysics Data System (ADS)

Satyasree, K. P. N. V., Dr; Lalitha Kumari, B., Dr; Jyotsna Devi, K. S. N. V.; Choudri, S. M. Roy; Pratap Joshi, K.

2017-08-01

Text-mining is one of the best potential way of automatically extracting information from the huge biological literature. To exploit its prospective, the knowledge encrypted in the text should be converted to some semantic representation such as entities and relations, which could be analyzed by machines. But large-scale practical systems for this purpose are rare. But text mining could be helpful for generating or validating predictions. Cellulases have abundant applications in various industries. Cellulose degrading enzymes are cellulases and the same producing bacteria - Bacillus subtilis & fungus Pseudomonas putida were isolated from top soil of Guntur Dt. A.P. India. Absolute cultures were conserved on potato dextrose agar medium for molecular studies. In this paper, we presented how well the text mining concepts can be used to analyze cellulase producing bacteria and fungi, their comparative structures are also studied with the aid of well-establised, high quality standard bioinformatic tools such as Bioedit, Swissport, Protparam, EMBOSSwin with which a complete data on Cellulases like structure, constituents of the enzyme has been obtained.

Injury Surveillance and Safety Considerations for Large-Format Lead-Acid Batteries Used in Mining Applications.

PubMed

Reyes, Miguel Angel; Novak, Thomas

2016-03-01

Large lead-acid batteries are predominantly used throughout the mining industry to power haulage, utility, and personnel-carrier vehicles. Without proper operation and maintenance, the use of these batteries can introduce mechanical and electrical hazards, particularly in the confined, and potentially dangerous, environment of an underground coal mine. A review of the Mine Safety and Health Administration accident/illness/injury database reveals that a significant number of injuries occur during the maintenance and repair of lead-acid batteries. These injuries include burns from electrical arcing and acid exposure, as well as strained muscles and crushed hands. The National Institute for Occupational Safety and Health investigated the design and implementation of these batteries to identify safety interventions that can mitigate these inherent hazards. This paper promotes practical design modifications, such as reducing the size and weight of battery assembly lids in conjunction with lift assists, as well as using five-pole cable connectors to improve safety.

Injury Surveillance and Safety Considerations for Large-Format Lead-Acid Batteries Used in Mining Applications

PubMed Central

Reyes, Miguel Angel; Novak, Thomas

2016-01-01

Large lead-acid batteries are predominantly used throughout the mining industry to power haulage, utility, and personnel-carrier vehicles. Without proper operation and maintenance, the use of these batteries can introduce mechanical and electrical hazards, particularly in the confined, and potentially dangerous, environment of an underground coal mine. A review of the Mine Safety and Health Administration accident/illness/injury database reveals that a significant number of injuries occur during the maintenance and repair of lead-acid batteries. These injuries include burns from electrical arcing and acid exposure, as well as strained muscles and crushed hands. The National Institute for Occupational Safety and Health investigated the design and implementation of these batteries to identify safety interventions that can mitigate these inherent hazards. This paper promotes practical design modifications, such as reducing the size and weight of battery assembly lids in conjunction with lift assists, as well as using five-pole cable connectors to improve safety. PMID:27784953

DOE Office of Scientific and Technical Information (OSTI.GOV)

Byrer, C.W.; Layne, A.W.; Guthrie, H.D.

The U.S. Department of Energy (DOE), at its Morgantown Energy Technology Center, has been involved in natural gas research since the 1970`s. DOE has assessed the potential of gas in coals throughout the U.S. and promoted research and development for recovery and use of methane found in minable and unminable coalbeds. DOE efforts have focused on the use of coal mine methane for regional economic gas self-sufficiency, energy parks, self-help initiatives, and small-power generation. This paper focuses on DOE`s past and present efforts to more effectively and efficiently recover and use this valuable domestic energy source. The Climate Change Actionmore » Plan (CCAP) (1) lists a series of 50 voluntary initiatives designed to reduce greenhouse gas emissions, such as methane from mining operations, to their 1990 levels. Action No. 36 of the CCAP expands the DOE research, development, and demonstration (RD&D) efforts to broaden the range of cost-effective technologies and practices for recovering methane associated with coal mining operations. The major thrust of Action No. 36 is to reduce methane emissions associated with coal mining operations from target year 2000 levels by 1.5 MMT of carbon equivalent. Crosscutting activities in the DOE Natural Gas Program supply the utilization sectors will address RD&D to reduce methane emissions released from various mining operations, focusing on recovery and end use technology systems to effectively drain, capture, and utilize the emitted gas. Pilot projects with industry partners will develop and test the most effective methods and technology systems for economic recovery and utilization of coal mine gas emissions in regions where industry considers efforts to be presently non-economic. These existing RD&D programs focus on near-term gas recovery and gathering systems, gas upgrading, and power generation.« less

Support design and practice for floor heave of deeply buried roadway

NASA Astrophysics Data System (ADS)

Liu, Chaoke; Ren, Jianxi; Gao, Bingli; Song, Yongjun

2017-05-01

Aiming at the severe floor heave of auxiliary haulage roadway in Jianzhuang Coal Mine, the paper analysed mechanical environment and failure characteristics of auxiliary haulage roadway surrounding rock with the combination of mechanical test, theoretical analysis, industrial test, etc. The mechanical mechanism for deformation and failure of weak rock roadway in Jianzhuang Coal Mine was disclosed by establishing a roadway mechanical model under the effect of even-distributed load, which provided a basis for the design of inverted concrete arch. Based on complex failure mechanism of the roadway, a support method with combined inverted concrete arch and anchor in floor was proposed. The result shows that the ground stress environment has extremely adverse influence on the roadway, and the practice indicates that the floor heave countermeasures can effectively control the floor heave. The obtained conclusion provides a reference for the research and design on control technology of roadway floor heave in the future.

Life-Cycle environmental impact assessment of mineral industries

NASA Astrophysics Data System (ADS)

Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

2018-05-01

Mining is the extraction and processing of valuable ferro and non-ferro metals and minerals to be further used in manufacturing industries. Valuable metals and minerals are extracted from the geological deposits and ores deep in the surface through complex manufacturing technologies. The extraction and processing of mining industries involve particle emission to air or water, toxicity to the environment, contamination of water resources, ozone layer depletion and most importantly decay of human health. Despite all these negative impacts towards sustainability, mining industries are working throughout the world to facilitate the employment sector, economy and technological growth. The five most important miners in the world are South Africa, Russia, Australia, Ukraine, Guinea. The mining industries contributes to their GDP significantly. However, the most important issue is making the mining world sustainable thus reducing the emissions. To address the environmental impacts caused by the mining sectors, this paper is going to analyse the environmental impacts caused by the 5 major minerals extraction processes, which are bauxite, ilmenite, iron ore, rutile and uranium by using the life-cycle impact assessment technologies. The analysis is done here using SimaPro software version 8.4 using ReCipe, CML and Australian indicator method.

Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry

NASA Technical Reports Server (NTRS)

Wier, C. E.; Wobber, F. J.; Russell, O. R.; Martin, K. R. (Principal Investigator)

1973-01-01

The author has identified the following significant results. Mined land reclamation analysis procedures developed within the Indiana portion of the Illinois Coal Basin were independently tested in Ohio utilizing 1:80,000 scale enlargements of ERTS-1 image 1029-15361-7 (dated August 21, 1972). An area in Belmont County was selected for analysis due to the extensive surface mining and the different degrees of reclamation occurring in this area. Contour mining in this area provided the opportunity to extend techniques developed for analysis of relatively flat mining areas in Indiana to areas of rolling topography in Ohio. The analysts had no previous experience in the area. Field investigations largely confirmed office analysis results although in a few areas estimates of vegetation percentages were found to be too high. In one area this error approximated 25%. These results suggest that systematic ERTS-1 analysis in combination with selective field sampling can provide reliable vegetation percentage estimates in excess of 25% accuracy with minimum equipment investment and training. The utility of ERTS-1 for practical and reasonably reliable update of mined lands information for groups with budget limitations is suggested. Many states can benefit from low cost updates using ERTS-1 imagery from public sources.

Mine waste management legislation. Gold mining areas in Romania

NASA Astrophysics Data System (ADS)

Maftei, Raluca-Mihaela; Filipciuc, Constantina; Tudor, Elena

2014-05-01

Problems in the post-mining regions of Eastern Europe range from degraded land and landscapes, huge insecure dumps, surface cracks, soil pollution, lowering groundwater table, deforestation, and damaged cultural potentials to socio economic problems like unemployment or population decline. There is no common prescription for tackling the development of post-mining regions after mine closure nor is there a common definition of good practices or policy in this field. Key words : waste management, legislation, EU Directive, post mining Rosia Montana is a common oh 16 villages; one of them is also called Rosia Montana, a traditional mining Community, located in the Apuseni Mountains in the North-Western Romania. Beneath part of the village area lays one of the largest gold and silver deposits in Europe. In the Rosia Montana area mining had begun ever since the height of the Roman Empire. While the modern approach to mining demands careful remediation of environmental impacts, historically disused mines in this region have been abandoned, leaving widespread environmental damage. General legislative framework Strict regulations and procedures govern modern mining activity, including mitigation of all environmental impacts. Precious metals exploitation is put under GO no. 190/2000 re-published in 2004. The institutional framework was established and organized based on specific regulations, being represented by the following bodies: • The Ministry of Economy and Commerce (MEC), a public institution which develops the Government policy in the mining area, also provides the management of the public property in the mineral resources area; • The National Agency for the development and implementation of the mining Regions Reconstruction Programs (NAD), responsible with promotion of social mitigation measures and actions; • The Office for Industry Privatization, within the Education Ministry, responsible with privatization of companies under the CEM; • The National Agency for Mineral Resources (NAMR) manages, on behalf of the state, the mineral resources. Waste management framework Nowadays, Romania, is trying to align its regulation concerning mining activity to the European legislation taking into consideration waste management and their impact on the environment. Therefore the European Waste Catalog (Commission Decision 2001/118/EC) has been updated and published in the form of HG 856/2002 Waste management inventory and approved wastes list, including dangerous wastes. The HG 349/2005 establishes the legal framework for waste storage activity as well as for the monitoring of the closing and post-closing existing deposits, taking into account the environment protection and the health of the general population. Based on Directive 2000/60/EC the Ministry of Waters Administration, Forests and Environment Protection from Romania issued the GO No 756/1997 (amended by GO 532/2002 and GO 1144/2002),"Regulations for environment pollution assessment" that contains alarm and intervention rates for soil pollution for contaminants such as metals, metalloids (Sb, Ag, As, Be, Bi, B, Cd, Co, Cr, Cu, Hg, Mo, Ni, Pb, Se, Sn, TI, V, Zn) and cyanides. Also GO No 756/1997 was amended and updated by Law No 310/2004 and 112/2006 in witch technical instructions concerning general framework for the use of water sources in the human activities including mining industry, are approved. Chemical compounds contained in industrial waters are fully regulated by H. G. 352/2005 concerning the contents of waste water discharged. Directive 2006/21/EC of the European Parliament and of the Council relating to the management of waste from extractive industries and amending Directive 2004/35/EC is transposed into the national law of the Romanian Government under Decision No 856/2008. The 856/2008 Decision on the management of waste from extractive industries establishes "the legal framework concerning the guidelines, measures and procedures to prevent or reduce as far as possible any adverse effects on the environment, in particular water, air, soil, fauna, flora and landscape, and any health risks to the population, arising as a result of waste management in extractive industries". Based on the Commission decision 2009/339/EC concerning the waste management facilities - classification criteria - Romanian Government issued GO 2042/2010 witch states the procedures for approving the plan of waste management in extractive industries and its applications norms. Law No. 22/2001 fallows the regulations from the Espoo Convention on assessing the impact of mining on the environment sector in a cross-border context. This work is presented within the framework of SUSMIN project.

Diversification of the Higher Mining Education Financing in Globalization Era

NASA Astrophysics Data System (ADS)

Frolova, Victoria; Dolina, Olga; Shpil'kina, Tatyana

2017-11-01

In the current conditions of global competition, the development of new mining technologies, the requirements to labor resources, their skills and creative potential are increasing. The tasks facing the mining industry cannot be solved without highly qualified personnel, especially managers, engineers and technicians, specialists who possess the knowledge and competences necessary for the development of science and technology of mining, and ensuring mining industrial safety. The authors analyze personnel problems and financing of mining higher education, conclude that there is a need to develop social partnership and diversify the sources of funding for training, advanced training and retraining of personnel for mining and processing of solid mineral deposits.

Long-Range Trends in the Development of Higher Education in Mining

ERIC Educational Resources Information Center

Pzhevskii, V. V.

1978-01-01

Reviews the relationship between scientific and technological progress, needs of the Soviet economy, and capacities of higher education institutions in terms of the future of the mining industry. Mining specialists will have to prepare for technical progress in the extracting industries, growth in production, complex mechanization, and automation…

Uranium mining industry views on ICRP statement on radon.

PubMed

Takala, J

2012-01-01

In 2009, the International Commission on Radiological Protection issued a statement on radon which stated that the dose conversion factor for radon progeny would likely double, and the calculation of risk from radon should move to a dosimetric approach, rather than the longstanding epidemiological approach. Through the World Nuclear Association, whose members represent over 90% of the world's uranium production, industry has been examining this issue with a goal of offering expertise and knowledge to assist with the practical implementation of these evolutionary changes to evaluating the risk from radon progeny. Industry supports the continuing use of the most current epidemiological data as a basis for risk calculation, but believes that further examination of these results is needed to better understand the level of conservatism in the potential epidemiological-based risk models. With regard to adoption of the dosimetric approach, industry believes that further work is needed before this is a practical option. In particular, this work should include a clear demonstration of the validation of the dosimetric model which includes how smoking is handled, the establishment of a practical measurement protocol, and the collection of relevant data for modern workplaces. Industry is actively working to address the latter two items. Copyright © 2012. Published by Elsevier Ltd.

Risk factors for children's blood lead levels in metal mining and smelting communities in Armenia: a cross-sectional study.

PubMed

Grigoryan, Ruzanna; Petrosyan, Varduhi; Melkom Melkomian, Dzovinar; Khachadourian, Vahe; McCartor, Andrew; Crape, Byron

2016-09-07

Children's exposure to lead poses a significant risk for neurobehavioral consequences. Existing studies documented lead contamination in residential soil in mining and smelting communities in Armenia. This study aimed to assess blood lead levels (BLL) in children living in three communities in Armenia adjacent to metal mining and smelting industries, and related risk factors. This cross-sectional study included 159 children born from 2007 to 2009 and living in Alaverdi and Akhtala communities and Erebuni district in Yerevan - the capital city. The BLL was measured with a portable LeadCare II Blood Lead Analyzer; a survey was conducted with primary caregivers. Overall Geometric Mean (GM) of BLL was 6.0 μg/dl: 6.8 for Akhtala, 6.4 for Alaverdi and 5.1 for Yerevan. In the sample 68.6 % of children had BLL above CDC defined reference level of 5 μg/dl: 83.8 % in Akhtala, 72.5 % in Alaverdi, and 52.8 % in Yerevan. Caregiver's lower education, dusting furniture less than daily, and housing distance from toxic source(s) were risk factors for higher BLL. Additional analysis for separate communities demonstrated interaction between housing distance from toxic source(s) and type of window in Erebuni district of Yerevan. The study demonstrated that children in three communities adjacent to metal mining and smelting industries were exposed to lead. Investigation of the risk factors suggested that in addition to promoting safe industrial practices at the national level, community-specific interventions could be implemented in low- and middle-income countries to reduce BLL among children.

Prospectors and Developers Association of Canada Mining Matters: A Model of Effective Outreach

NASA Astrophysics Data System (ADS)

Hymers, L.; Heenan, S.

2009-05-01

Prospectors and Developers Association of Canada Mining Matters is a charitable organization whose mandate is to bring the wonders of Canada's geology and mineral resources to students, educators and industry. The organization provides current information about rocks, minerals, metals, and mining and offers exceptional educational resources, developed by teachers and for teachers that meet Junior, Intermediate and Senior Provincial Earth Science and Geography curriculum expectations. Since 1994, Mining Matters has reached more than 400,000 educators, students, industry representatives, and Aboriginal Youth through Earth Science resources. At the time of the program's inception, members of the Prospectors and Developers Association of Canada (PDAC) realized that their mining and mineral industry expertise could be of help to teachers and students. Consulting experts in education, government, and business, and the PDAC worked together to develop the first Mining Matters Earth Science curriculum kit for Grades 6 and 7 teachers in Ontario. PDAC Mining Matters became the official educational arm of the Association and a charitable organization in 1997. Since then, the organization has partnered with government, industry, and educators to develop bilingual Earth science teaching units for Grades 4 and 7, and senior High School. The teaching units consist of kits that contain curriculum correlated lesson plans, inform bulletins, genuine data sets, rock and mineral samples, equipment and additional instructional resources. Mining Matters offers instructional development workshops for the purposes of training pre-service and in- service educators to use our teaching units in the classroom. The workshops are meant to provide teachers with the knowledge and confidence they need to successfully employ the units in the classroom. Formal mechanisms for resource and workshop evaluations are in place. Overwhelmingly teacher feedback is positive, describing the excellence, effectiveness and suitability of Mining Matters resources and training workshops for classroom instruction. Mining Matters also operates an Aboriginal Youth Outreach Program that promotes the importance of the minerals industry to Aboriginal youth through the distribution of educational resources, the provision of educational opportunities, and exposure to mineral and mining industry career opportunities and professionals. The Aboriginal Youth Outreach Program is designed to engage youth in Earth Sciences, providing them with the opportunity to develop skills, competencies and knowledge through Earth science, career, and skills development education. The Mining Matters program is effective and has garnered a National reputation for excellence. The Mining Matters program is a model of effective partnerships between industry, academia, and education outreach organizations. Our resources are currently used in Ontario, Manitoba, Saskatchewan, and British Columbia, with new partnerships being developed in Quebec and Nova Scotia.

The Historical Use Of Mine-Drainage And Pyrite-Oxidation Waters In Central And Eastern England, United Kingdom

NASA Astrophysics Data System (ADS)

Banks, David; Younger, Paul L.; Dumpleton, Steve

1996-04-01

Waters draining from abandoned coal or metals mines are often regarded as an environmental threat. Historical examples from the lead and coal mining industries of central and northeastern England illustrate that mine waters can also be regarded as an important resource in terms of 1) baseflow for effluent dilution; 2) drinking or industrial waters; 3) flocculating agents for sewage or water treatment; 4) spa waters; 5) sources of industrial minerals, including alkali metals and barium; and 6) a source of iron oxides or sulphates for tanning or pigmentation purposes. An appreciation of the potential economic value of mine waters and their contents is essential for the design of cost-effective treatment options.

Proceedings of the 92nd regular meeting of the Rocky Mountain Coal Mining Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finnie, D.G.

1996-12-31

The proceedings of the 92nd Regular Meeting of the Rocky Mountain Coal Mining Institute held June 29-July 2, 1996 in Durango, CO. are presented. Attention was focused on the following areas: plots, plans, and partnerships in US mining; partnerships at McKinley; deregulation of the electric utility industry; environmental partnerships; Federal Mine Safety and Health Act; injury prevention in the coal mining industry; new trend in back injury prevention; and automated high wall mining. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

Factors and competitiveness analysis in rare earth mining, new methodology: case study from Brazil.

PubMed

Silva, Gustavo A; Petter, Carlos O; Albuquerque, Nelson R

2018-03-01

Rare earths are increasingly being applied in high-tech industries, such as green energy (e.g. wind power), hybrid cars, electric cars, permanent high-performance magnets, superconductors, luminophores and many other industrial sectors involved in modern technologies. Given that China dominates this market and imposes restrictions on production and exports whenever opportunities arise, it is becoming more and more challenging to develop business ventures in this sector. Several initiatives were taken to prospect new resources and develop the production chain, including the mining of these mineral assets around the world, but some factors of uncertainties, including current low prices, increased the challenge of transforming the current resources into deposits or productive mines. Thus, analyzing the competitiveness of advanced projects becomes indispensable. This work has the objective of introducing a new methodology of competitiveness analysis, where some variables are considered as main factors that can contribute strongly to make unfeasible a mining enterprise for the use of rare earth elements (REE) with this methodology, which is quite practical and reproducible, it was possible to verify some real facts, such as: the fact that the Lynas Mount Weld CLD (AUS) Project is resilient to the uncertainties of the RE sector, at the same time as the Molycorp Project is facing major financial difficulties (under judicial reorganization). It was also possible to verify that the Araxá Project of CBMM in Brazil is one of the most competitive in this country. Thus, we contribute to the existing literature, providing a new methodology for competitiveness analysis in rare earth mining.

Development of Test Rig for Robotization of Mining Technological Processes - Oversized Rock Breaking Process Case

NASA Astrophysics Data System (ADS)

Pawel, Stefaniak; Jacek, Wodecki; Jakubiak, Janusz; Zimroz, Radoslaw

2017-12-01

Production chain (PCh) in underground copper ore mine consists of several subprocesses. From our perspective implementation of so called ZEPA approach (Zero Entry Production Area) might be very interesting [16]. In practice, it leads to automation/robotization of subprocesses in production area. In this paper was investigated a specific part of PCh i.e. a place when cyclic transport by LHDs is replaced with continuous transport by conveying system. Such place is called dumping point. The objective of dumping points with screen is primary classification of the material (into coarse and fine material) and breaking oversized rocks with hydraulic hammer. Current challenges for the underground mining include e.g. safety improvement as well as production optimization related to bottlenecks, stoppages and operational efficiency of the machines. As a first step, remote control of the hydraulic hammer has been introduced, which not only transferred the operator to safe workplace, but also allowed for more comfortable work environment and control over multiple technical objects by a single person. Today literature analysis shows that current mining industry around the world is oriented to automation and robotization of mining processes and reveals technological readiness for 4th industrial revolution. The paper is focused on preliminary analysis of possibilities for the use of the robotic system to rock-breaking process. Prototype test rig has been proposed and experimental works have been carried out. Automatic algorithms for detection of oversized rocks, crushing them as well as sweeping and loosening of material have been formulated. Obviously many simplifications have been assumed. Some near future works have been proposed.

The future of European mining: What should our mining industry learn from the Skouries and Rosia Montana community gold conflicts

NASA Astrophysics Data System (ADS)

Hardy, Liam; Heller, Shaun; Faltyn, Rowan; Stefanaki, Anna; Economidou, Romina; Savin, Irina; Hood, Leo; Conway, Christopher

2017-04-01

The popular image of mining portrayed by media and by a majority of public opinion is a dominantly negative one. From worker's rights to environmental damages, disasters such as the Copiapó mine collapse (Chile), the acid mine drainage at Lousal (Portugal) and the Pb contamination of waters around the Tyndrum mines (Scotland) overshadow initiatives like the ICMM. Some companies receive little praise despite creating active community education and investment projects, while others simply build higher barbed wire fences and attempt to weather the protests, budgeting them into mine life assessments. This image problem, combined with the decentralised political segregation of Europe and the increased power of grass-roots protest initiatives (such as Antigold in Greece), has resulted in mining companies joining a long list of industries effected by the 'auto-protest' reaction in face of development, regardless of potential regional and national benefits, there is a pre-existing lack of trust in corporate and government powers to protect community interests. The poor management of existing licences is thus becoming a significant danger to future operations and the wider industry. Here we report on the Rosia Montana dispute (Romania) and the ongoing Skouries conflict (Greece). We then discuss how the European mining industry may need to significantly adapt its exploration and community engagement strategies to avoid future conflicts and, present a recent example of how effective suitably organised community engagement projects can be for local mining initiatives from Southern Portugal.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kilpatrick, Laura E.; Cotter, Ed

The U.S. Department of Energy (DOE) Office of Legacy Management is responsible for administering the DOE Uranium Leasing Program (ULP) and its 31 uranium lease tracts located in the Uravan Mineral Belt of southwestern Colorado (see Figure 1). In addition to administering the ULP for the last six decades, DOE has also undertaken the significant task of reclaiming a large number of abandoned uranium (legacy) mine sites and associated features located throughout the Uravan Mineral Belt. In 1995, DOE initiated a 3-year reconnaissance program to locate and delineate (through extensive on-the-ground mapping) the legacy mine sites and associated features containedmore » within the historically defined boundaries of its uranium lease tracts. During that same time frame, DOE recognized the lack of regulations pertaining to the reclamation of legacy mine sites and contacted the U.S. Bureau of Land Management (BLM) concerning the reclamation of legacy mine sites. In November 1995, The BLM Colorado State Office formally issued the United States Department of the Interior, Colorado Bureau of Land Management, Closure/Reclamation Guidelines, Abandoned Uranium Mine Sites as a supplement to its Solid Minerals Reclamation Handbook (H-3042-1). Over the next five-and-one-half years, DOE reclaimed the 161 legacy mine sites that had been identified on DOE withdrawn lands. By the late 1990's, the various BLM field offices in southwestern Colorado began to recognize DOE's experience and expertise in reclaiming legacy mine sites. During the ensuing 8 years, BLM funded DOE (through a series of task orders) to perform reclamation activities at 182 BLM mine sites. To date, DOE has reclaimed 372 separate and distinct legacy mine sites. During this process, DOE has learned many lessons and is willing to share those lessons with others in the reclamation industry because there are still many legacy mine sites not yet reclaimed. DOE currently administers 31 lease tracts (11,017 ha) that collectively contain over 220 legacy (abandoned) uranium mine sites. This contrasts to the millions of hectares administered by the BLM, the U.S. Forest Service, and other federal, tribal, and state agencies that contain thousands of such sites. DOE believes that the processes it has used provide a practical and cost-effective approach to abandoned uranium mine-site reclamation. Although the Federal Acquisition Regulations preclude DOE from competing with private industry, DOE is available to assist other governmental and tribal agencies in their reclamation efforts. (authors)« less

Mine safety assessment using gray relational analysis and bow tie model

PubMed Central

2018-01-01

Mine safety assessment is a precondition for ensuring orderly and safety in production. The main purpose of this study was to prevent mine accidents more effectively by proposing a composite risk analysis model. First, the weights of the assessment indicators were determined by the revised integrated weight method, in which the objective weights were determined by a variation coefficient method and the subjective weights determined by the Delphi method. A new formula was then adopted to calculate the integrated weights based on the subjective and objective weights. Second, after the assessment indicator weights were determined, gray relational analysis was used to evaluate the safety of mine enterprises. Mine enterprise safety was ranked according to the gray relational degree, and weak links of mine safety practices identified based on gray relational analysis. Third, to validate the revised integrated weight method adopted in the process of gray relational analysis, the fuzzy evaluation method was used to the safety assessment of mine enterprises. Fourth, for first time, bow tie model was adopted to identify the causes and consequences of weak links and allow corresponding safety measures to be taken to guarantee the mine’s safe production. A case study of mine safety assessment was presented to demonstrate the effectiveness and rationality of the proposed composite risk analysis model, which can be applied to other related industries for safety evaluation. PMID:29561875

The Mechanization of Mining.

ERIC Educational Resources Information Center

Marovelli, Robert L.; Karhnak, John M.

1982-01-01

Mechanization of mining is explained in terms of its effect on the mining of coal, focusing on, among others, types of mining, productivity, machinery, benefits to retired miners, fatality rate in underground coal mines, and output of U.S. mining industry. (Author/JN)

Translations on Eastern Europe Political, Sociological, and Military Affairs, Number 1370

DTIC Science & Technology

1977-03-28

Bitto II bauxite mine , the Szikra Press, and the Szekszard Meat Combine. On the basis of a mid- year decision which will depend on the preparations...Industry and Mines , the Ministry of Education and Culture, the Ministry of the Light and Food Industries. Article l6 Permission to produce and use...poisons until any possible danger has "been removed. Article 27 The Ministry of Industry and Mines in cooperation with the Ministry of Construction

A watershed-scale approach to tracing metal contamination in the environment

USGS Publications Warehouse

Church, Stanley E

1996-01-01

IntroductionPublic policy during the 1800's encouraged mining in the western United States. Mining on Federal lands played an important role in the growing economy creating national wealth from our abundant and diverse mineral resource base. The common industrial practice from the early days of mining through about 1970 in the U.S. was for mine operators to dispose of the mine wastes and mill tailings in the nearest stream reach or lake. As a result of this contamination, many stream reaches below old mines, mills, and mining districts and some major rivers and lakes no longer support aquatic life. Riparian habitats within these affected watersheds have also been impacted. Often, the water from these affected stream reaches is generally not suitable for drinking, creating a public health hazard. The recent Department of Interior Abandoned Mine Lands (AML) Initiative is an effort on the part of the Federal Government to address the adverse environmental impact of these past mining practices on Federal lands. The AML Initiative has adopted a watershed approach to determine those sites that contribute the majority of the contaminants in the watershed. By remediating the largest sources of contamination within the watershed, the impact of metal contamination in the environment within the watershed as a whole is reduced rather than focusing largely on those sites for which principal responsible parties can be found.The scope of the problem of metal contamination in the environment from past mining practices in the coterminous U.S. is addressed in a recent report by Ferderer (1996). Using the USGS1:2,000,000-scale hydrologic drainage basin boundaries and the USGS Minerals Availability System (MAS) data base, he plotted the distribution of 48,000 past-producing metal mines on maps showing the boundaries of lands administered by the various Federal Land Management Agencies (FLMA). Census analysis of these data provided an initial screening tool for prioritization of watersheds in the western U.S. A different approach to the scope of the abandoned mine problem (Church et al., 1996a) is shown by the water quality data collected by the States under the Clean Water Act, section 305(b). These data document the stream reaches affected by metals from naturally occurring sources as well as from mining, or mineral resource extraction. Permitted discharges from active industrial and mine sites are not covered in the 305(b) data base.Local citizens and state and federal agencies are all part of the collaborative decision process used to select the drainage basins chosen for the AML Initiative pilot studies. Data gathered by these three entities were brought to bear on the watershed selection process. The USGS prepared data available from Federal data bases in the form of interpretative GIS products. Maps of the states of Colorado (Plumlee et al., 1995) and a similar study of the state of Montana (USGS, unpublished data) were used to select the Animas watershed in southwestern Colorado and the Boulder watershed southwest of Helena Montana as the pilot study areas for the AML Initiative. Thus, the watersheds selected for study were public decisions made on the basis of available scientific data. The role of the U.S. Geological Survey in the Abandoned Mine Land Initiative is outlined in Buxton et al. (1997).The watershed approach to metals contamination in the environment has been studied in several drainage basins (Church et al., 1993, 1994, 1995, 1996b; Kimball et al., 1995). The underlying principles used to successfully discriminate between sources and to quantify the impact of these sources on the environment are the subject of this report.

Mining. Industry Training Monograph No. 2.

ERIC Educational Resources Information Center

Dumbrell, Tom

Mining is the second smallest industry division in terms both of employment and number of business units in Australia. Employment accounts for less than 1 percent of all jobs. The outlook for employment is clouded by continuing uncertainty in Australia's main Asian markets and by the longer-term impact of environmental concerns. Mining industry…

Challenging Transitions: Trades and Trade-Offs for Racialised Youth in Canada's Mining Industry

ERIC Educational Resources Information Center

Hodgkins, Andrew

2016-01-01

This article examines the precarious learning-to-work transitions experienced by aboriginal youth in the Canadian oil sands mining industry. Drawing from an empirical case study of a mine-sponsored, pre-apprenticeship training programme, challenges experienced by programme participants, as well as their socialisation into the world of work are…

Keeping rail on track: preliminary findings on safety culture in Australian rail.

PubMed

Blewett, Verna; Rainbird, Sophia; Dorrian, Jill; Paterson, Jessica; Cattani, Marcus

2012-01-01

'Safety culture' is identified in the literature as a critical element of healthy and safe workplaces. How can rail organizations ensure that consistently effective work health and safety cultures are maintained across the diversity of their operations? This paper reports on research that is currently underway in the Australian rail industry aimed at producing a Model of Best Practice in Safety Culture for the industry. Located in rail organizations dedicated to the mining industry as well as urban rail and national freight operations, the research examines the constructs of organizational culture that impact on the development and maintenance of healthy and safe workplaces. The research uses a multi-method approach incorporating quantitative (survey) and qualitative (focus groups, interviews and document analysis) methods along with a participative process to identify interventions to improve the organization and develop plans for their implementation. The research uses as its analytical framework the 10 Platinum Rules, from the findings of earlier research in the New South Wales (Australia) mining industry, Digging Deeper. Data collection is underway at the time of writing and preliminary findings are presented at this stage. The research method may be adapted for use as a form of organizational review of safety and health in organizational culture.

Industrial Internet of Things: (IIoT) applications in underground coal mines.

PubMed

Zhou, C; Damiano, N; Whisner, B; Reyes, M

2017-12-01

The Industrial Internet of Things (IIoT), a concept that combines sensor networks and control systems, has been employed in several industries to improve productivity and safety. U.S. National Institute for Occupational Safety and Health (NIOSH) researchers are investigating IIoT applications to identify the challenges of and potential solutions for transferring IIoT from other industries to the mining industry. Specifically, NIOSH has reviewed existing sensors and communications network systems used in U.S. underground coal mines to determine whether they are capable of supporting IIoT systems. The results show that about 40 percent of the installed post-accident communication systems as of 2014 require minimal or no modification to support IIoT applications. NIOSH researchers also developed an IIoT monitoring and control prototype system using low-cost microcontroller Wi-Fi boards to detect a door opening on a refuge alternative, activate fans located inside the Pittsburgh Experimental Mine and actuate an alarm beacon on the surface. The results of this feasibility study can be used to explore IIoT applications in underground coal mines based on existing communication and tracking infrastructure.

Modern methods of surveyor observations in opencast mining under complex hydrogeological conditions.

NASA Astrophysics Data System (ADS)

Usoltseva, L. A.; Lushpei, V. P.; Mursin, VA

2017-10-01

The article considers the possibility of linking the modern methods of surveying security of open mining works to improve industrial safety in the Primorsky Territory, as well as their use in the educational process. Industrial Safety in the management of Surface Mining depends largely on the applied assessment methods and methods of stability of pit walls and slopes of dumps in the complex mining and hydro-geological conditions.

Decision support methods for the environmental assessment of contamination at mining sites.

PubMed

Jordan, Gyozo; Abdaal, Ahmed

2013-09-01

Polluting mine accidents and widespread environmental contamination associated with historic mining in Europe and elsewhere has triggered the improvement of related environmental legislation and of the environmental assessment and management methods for the mining industry. Mining has some unique features such as natural background pollution associated with natural mineral deposits, industrial activities and contamination located in the three-dimensional sub-surface space, the problem of long-term remediation after mine closure, problem of secondary contaminated areas around mine sites and abandoned mines in historic regions like Europe. These mining-specific problems require special tools to address the complexity of the environmental problems of mining-related contamination. The objective of this paper is to review and evaluate some of the decision support methods that have been developed and applied to mining contamination. In this paper, only those methods that are both efficient decision support tools and provide a 'holistic' approach to the complex problem as well are considered. These tools are (1) landscape ecology, (2) industrial ecology, (3) landscape geochemistry, (4) geo-environmental models, (5) environmental impact assessment, (6) environmental risk assessment, (7) material flow analysis and (8) life cycle assessment. This unique inter-disciplinary study should enable both the researcher and the practitioner to obtain broad view on the state-of-the-art of decision support methods for the environmental assessment of contamination at mine sites. Documented examples and abundant references are also provided.

77 FR 35058 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Pilot...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-12

... for OMB Review; Comment Request; Pilot Surveys of Employee Voice in the Coal Mining Industry ACTION... the Coal Mining Industry,'' to the Office of Management and Budget (OMB) for review and approval for...' voice in mining workplaces under the jurisdiction of the MSHA. The DOL working definition for voice in...

Resources Work: Careers in Mining, Oil, and Gas

ERIC Educational Resources Information Center

Torpey, Elka

2013-01-01

This article describes occupations in the mining, oil, and gas extraction industry. The first section covers the industry's employment and outlook. The second section highlights some common occupations. The third section discusses pros and cons of the work. The fourth section describes how to start a career in mining or oil and gas. And the fifth…

Proximity to mining industry and cancer mortality.

PubMed

Fernández-Navarro, Pablo; García-Pérez, Javier; Ramis, Rebeca; Boldo, Elena; López-Abente, Gonzalo

2012-10-01

Mining installations are releasing toxic substances into the environment which could pose a health problem to populations in their vicinity. We sought to investigate whether there might be excess cancer-related mortality in populations residing in towns lying in the vicinity of Spanish mining industries governed by the Integrated Pollution Prevention and Control Directive, and the European Pollutant Release and Transfer Register Regulation, according to the type of extraction method used. An ecologic study was designed to examine municipal mortality due to 32 types of cancer, across the period 1997 through 2006. Population exposure to pollution was estimated on the basis of distance from town of residence to pollution source. Poisson regression models, using the Bayesian conditional autoregressive model proposed by Besag, York and Molliè and Integrated Nested Laplace Approximations for Bayesian inference, were used: to analyze risk of dying from cancer in a 5-kilometer zone around mining installations; effect of type of industrial activity; and to conduct individual analyses within a 50-kilometer radius of each installation. Excess mortality (relative risk, 95% credible interval) of colorectal cancer (1.097, 1.041-1.157), lung cancer (1.066, 1.009-1.126) specifically related with proximity to opencast coal mining, bladder cancer (1.106, 1.016-1.203) and leukemia (1.093, 1.003-1.191) related with other opencast mining installations, was detected among the overall population in the vicinity of mining installations. Other tumors also associated in the stratified analysis by type of mine, were: thyroid, gallbladder and liver cancers (underground coal installations); brain cancer (opencast coal mining); stomach cancer (coal and other opencast mining installations); and myeloma (underground mining installations). The results suggested an association between risk of dying due to digestive, respiratory, hematologic and thyroid cancers and proximity to Spanish mining industries. These associations were dependent on the type of mine. Copyright © 2012 Elsevier B.V. All rights reserved.

Prevalence of noise induced hearing loss among employees at a mining industry in Zimbabwe.

PubMed

Chadambuka, A; Mususa, F; Muteti, S

2013-12-01

Noise induced hearing loss (NIHL) is within the top five occupational illnesses in Zimbabwe. Workers at a mining company complained about loss of hearing at the mine clinic. To determine the prevalence of NIHL among employees at the Mine. We conducted a descriptive cross sectional study at the mine. Workers were proportionally selected to represent all the mine departments or working areas. We measured noise levels at various mine sites, conducted a walk-through survey to observe noise related worker practices and conducted audiometric testing. Mean age for workers was 34.8±7.6 years and the mean duration of exposure to noise was 7.5±1.2 years. All workers could define noise. Ninety (53%) workers attributed NIHL to noisy work environment. Excessive noise levels were in Plant Processing (94 dBA), Underground Mining (102 dBA) and (Underground Workshop (103 dBA). Sixty two (36.7%) workers had NIHL. NIHL increased as a function of age (chi square=30.99 df=3 p<0.01) and was associated with work area (chi square=24.96 df=5 p<0.01). Observed workers took heed of noise warnings. There was no documented hearing conservation program at the mine. The prevalence of NIHL of 37% is high. Age and work area were associated with NIHL. Studies reported that age tends to distort the relationship between noise exposure and NIHL. Mine management should institute a hearing conservation program to protect employees against hazardous noise. Management may meanwhile use administrative controls and adhere to permissible exposure limits according to the noise regulations.

Geochemical characteristics of rare earth elements in different types of soil: A chemometric approach.

PubMed

Khan, Aysha Masood; Behkami, Shima; Yusoff, Ismail; Md Zain, Sharifuddin Bin; Bakar, Nor Kartini Abu; Bakar, Ahmad Farid Abu; Alias, Yatimah

2017-10-01

Rare earth elements (REEs) are becoming significant due to their huge applications in many industries, large-scale mining and refining activities. Increasing usage of such metals pose negative environmental impacts. In this research ICP-MS has been used to analyze soil samples collected from former ex-mining areas in the depths of 0-20 cm, 21-40 cm, and 41-60 cm of residential, mining, natural, and industrial areas of Perak. Principal component analysis (PCA) revealed that soil samples taken from different mining, industrial, residential, and natural areas are separated into four clusters. It was observed that REEs were abundant in most of the samples from mining areas. Concentration of the rare elements decrease in general as we move from surface soil to deeper soils. Copyright © 2017 Elsevier Ltd. All rights reserved.

Color machine vision in industrial process control: case limestone mine

NASA Astrophysics Data System (ADS)

Paernaenen, Pekka H. T.; Lemstrom, Guy F.; Koskinen, Seppo

1994-11-01

An optical sorter technology has been developed to improve profitability of a mine by using color line scan machine vision technology. The new technology adapted longers the expected life time of the limestone mine and improves its efficiency. Also the project has proved that color line scan technology of today can successfully be applied to industrial use in harsh environments.

Best practice workplace HIV/AIDS programmes in South Africa: A review of case studies and lessons learned

PubMed Central

2009-01-01

ABSTRACT Background A group of experts attending a tripartite interregional meeting on best practices in HIV/AIDS workplace policies and programmes organised by the International Labour Organisation (ILO) in Geneva, Switzerland, identified 34 best practice workplace HIV programmes from across the world. Method The ten criteria that were used for reviewing best practice workplace HIV/AIDS programmes in South Africa include acceptability, accessibility, ethical soundness, perceived impact, relevance, appropriateness, innovativeness, efficiency, sustainability and replicability. Results More than one-third (35.3%) of the 34 best practice workplace interventions identified were found in businesses and industries in South Africa. This constitutes a significant and encouraging effort to deal with HIV/AIDS in the workplace. Approximately 16.7% of the best practice workplace HIV/AIDS interventions focused on policy and legal frameworks, 50% of these interventions focused on prevention, 16.7% provided links beyond the workplace and a further 16.7% were interventions that focused on knowledge and evidence. A third (33.3%) of practices were found in the mining industry, 16.7% in the motor industry, 16.7% from workers’ unions, and the rest (33.3%) were found in a sugar company, an electricity supply company, a pharmaceutical company and the ministry of Public Service and Administration. Conclusion It is encouraging that over one-third of all best practice workplace HIV interventions identified by the ILO experts were found in South Africa. The majority of these policies and programmes were focused on HIV prevention.

76 FR 16741 - Applications for New Awards; Erma Byrd Scholarship Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-25

... course of study that will lead to a career in industrial health and safety occupations, including mine... requires recipients of the scholarship to begin employment in a career position related to industrial... work in a career position related to industrial health and safety, including mine safety, for a period...

Aquatic Ecosystem Enhancement at Mountaintop Mining Sites Symposium

DOE Office of Scientific and Technical Information (OSTI.GOV)

Black, D. Courtney; Lawson, Peter; Morgan, John

2000-01-12

Welcome to this symposium which is part of the ongoing effort to prepare an Environmental Impact Statement (EIS) regarding mountaintop mining and valley fills. The EIS is being prepared by the U.S. Environmental Protection Agency, U.S. Army Corps of Engineers, U.S. Office of Surface Mining, and U.S. Fish and Wildlife Service, in cooperation with the State of West Virginia. Aquatic Ecosystem Enhancement (AEE) at mountaintop mining sites is one of fourteen technical areas identified for study by the EIS Interagency Steering Committee. Three goals were identified in the AEE Work Plan: 1. Assess mining and reclamation practices to show howmore » mining operations might be carried out in a way that minimizes adverse impacts to streams and other environmental resources and to local communities. Clarify economic and technical constraints and benefits. 2. Help citizens clarify choices by showing whether there are affordable ways to enhance existing mining, reclamation, mitigation processes and/or procedures. 3. Ide identify data needed to improve environmental evaluation and design of mining projects to protect the environment. Today’s symposium was proposed in the AEE Team Work Plans but coordinated planning for the event began September 15, 1999 when representatives from coal industry, environmental groups and government regulators met in Morgantown. The meeting participants worked with a facilitator from the Canaan Valley Institute to outline plans for the symposium. Several teams were formed to carry out the plans we outlined in the meeting.« less

Adaption of Machine Fluid Analysis for Manufacturing - Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pardini, Allan F.

2005-08-16

Pacific Northwest National Laboratory (PNNL: Operated by Battelle Memorial Institute for the Department of Energy) is working with the Department of Energy (DOE) to develop technology for the US mining industry. Filtration and lubricant suppliers to the pulp and paper industry had noted the recent accomplishments by PNNL and its industrial partners in the DOE OIT Mining Industry of the Future Program, and asked for assistance in adapting this DOE-funded technology to the pulp and paper industry.

A Faster Fastener

NASA Technical Reports Server (NTRS)

2000-01-01

A licensing agreement between Marshall Space Flight Center and M&A Screw and Machineworks has brought the quick connect nut to the commerical market. Originally designed as part of a project seeking in-space assembly techniques, the quick connect nut is secured around a bolt merely by pushing it onto the bolt and giving it a single twist. Applications for the nuts include oil drilling platforms, mining industry, and other practices that rely on speedy assembly for success.

Psychological Trauma in the Workplace: Variation of Incident Severity among Industry Settings and between Recurring vs Isolated Incidents.

PubMed

DeFraia, G S

2015-07-01

Psychologically traumatic workplace events (known as critical incidents) occur within various work environments, with workgroups in certain industries vulnerable to multiple incidents. With the increasing prevalence of incidents in the USA, incident response is a growing practice area within occupational medicine, industrial psychology, occupational social work and other occupational health professions. To analyze a measure of incident severity based on level of disruption to the workplace and explore whether incident severity varied among different industry settings or between workgroups experiencing multiple vs single traumatic incidents. Administrative data mining was employed to examine practice data from a workplace trauma response unit in the USA. Bivariate analyses were conducted to test whether scores from an instrument measuring incident severity level varied among industry settings or between workgroups impacted by multiple vs isolated events. Incident severity level differed among various industry settings. Banks, retail stores and fast food restaurants accounted for the most severe incidents, while industrial and manufacturing sites reported less severe incidents. Workgroups experiencing multiple incidents reported more severe incidents than workgroups experiencing a single incident. Occupational health practitioners should be alert to industry differences in several areas: pre-incident resiliency training, the content of business recovery plans, assessing worker characteristics, strategies to assist continuous operations and assisting workgroups impacted by multiple or severe incidents.

Mapping of the dilemma of mining against forest and conservation in the Lom and Djérem Division, Cameroon

NASA Astrophysics Data System (ADS)

Tchindjang, Mesmin; Voundi, Eric; Mbevo Fendoung, Philippes; Haman, Unusa; Saha, Frédéric; Casimir Njombissie Petcheu, Igor

2018-05-01

Mining practices in Cameroon began since the colonial period. The artisanal mining sector before independence contributed to 11-20 % of GDP. From 2000, the rich potential of the Cameroonian subsoil attract many foreign investors with over 600 research and mining permits already granted during the last decade. But, Cameroonian forests also have a long history from the colonial period to the pre-sent. However, mining activities in forest environments are governed by two different legal frameworks, including mining code i.e. Law No. 001 of 16 April 2001 organizing the mining industry and Law No. 94-01 of 20 January 1994 governing forests, wildlife and fisheries. Therefore, in the absence of detailed studies of these laws, there are conflicts of interests, rights and obligations that overlap, requiring research needs and taking appropriate decisions. The objective of this research in the Lom and Djérem division is to study, apart from the proliferation of mining li-censes and actors, the dilemma as well as the impact of the extension of mining activities on the degradation of forest cover. Using geospatial tools through multi-temporal and multisensor satellite images (Landsat from 1976 to 2015, IKONOS, GEOEYE, Google Earth) coupled with field investigations; we mapped the dynamic of different forms of land use (mining permits, FMU and protected areas of permanent forest estate) and highlighted paradoxically the conflict of land use. We came to the conclusion that the rhythm of issuing mining permits and authorizations in this forestall zone is so fast that one can wonder whether we still find a patch of forest within 50 years.

MINE WASTE TECHNOLOGY PROGRAM: A SUCCESS STORY

EPA Science Inventory

Mining Waste generated by active and inactive mining operations is a growing problem for the mining industry, local governments, and Native American communities because of its impact on human health and the environment. In the US, the reported volume of mine waste is immense: 2 b...

Mining research: the respective roles of government and private institutions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Boyd, J.

1978-01-01

The extractive industries in the U.S. in 1975 produced only 4.2% of the GNP; yet, 18% of the economy is engaged directly in processing or in converting these minerals into usable forms. None of the remaining portions of the economy can perform without products of the extractive industries. Mr. Boyd delineates and explains the respective roles of the mining industry, the mining-machinery industry, the Federal government, and those research institutions engaged in mining or related research. He further examines the views of the various segments of the mining and minerals community, outlines the major issues involved, and arrives at conclusionsmore » tempered by his long and diversified experience in the field. Emphasis is placed on the activities of the Bureau of Mines (BuM). The main finding of the study is that the government as a whole must recognize that mining research is essential, and be prepared to adjust it's financial and organizational structure accordingly. Emphasis must be directed away from compliance with detailed regulations, which become obsolete very quickly, to education and cooperation. The BuM cannot do this itself. The matter is of such basic importance to the nation, and involves so many diverse jurisdictions, as to require attention from the highest levels of the Executive Branch and several committees of the Congress. (MCW)« less

Multiplier Accounting of Indian Mining Industry: The Application

NASA Astrophysics Data System (ADS)

Hussain, Azhar; Karmakar, Netai Chandra

2017-10-01

In the previous paper (Hussain and Karmakar in Inst Eng India Ser, 2014. doi: 10.1007/s40033-014-0058-0), the concepts of input-output transaction matrix and multiplier were explained in detail. Input-output multipliers are indicators used for predicting the total impact on an economy due to changes in its industrial demand and output which is calculated using transaction matrix. The aim of this paper is to present an application of the concepts with respect to the mining industry, showing progress in different sectors of mining with time and explaining different outcomes from the results obtained. The analysis shows that a few mineral industries saw a significant growth in their multiplier values over the years.

Environmental impact assessment of european non-ferro mining industries through life-cycle assessment

NASA Astrophysics Data System (ADS)

Hisan Farjana, Shahjadi; Huda, Nazmul; Parvez Mahmud, M. A.

2018-05-01

European mining industries are the vast industrial sector which contributes largely on their economy which constitutes of ferro and non-ferro metals and minerals industries. The non-ferro metals extraction and processing industries require focus of attention due to sustainability concerns as their manufacturing processes are highly energy intensive and impacts globally on environment. This paper analyses major environmental effects caused by European metal industries based on the life-cycle impact analysis technologies. This research work is the first work in considering the comparative environmental impact analysis of European non-ferro metal industries which will reveal their technological similarities and dissimilarities to assess their environmental loads. The life-cycle inventory datasets are collected from the EcoInvent database while the analysis is done using the CML baseline and ReCipe endpoint method using SimaPro software version 8.4. The CML and ReCipe method are chosen because they are specialized impact assessment methods for European continent. The impact categories outlined for discussion here are human health, global warming and ecotoxicity. The analysis results reveal that the gold industry is vulnerable for the environment due to waste emission and similar result retained by silver mines a little bit. But copper, lead, manganese and zinc mining processes and industries are environment friendly in terms of metal extraction technologies and waste emissions.

U.S. EPA/U.S. DOE MINE WASTE TECHNOLOGY PROGRAM

EPA Science Inventory

Mining is essential to maintain our way of life. However, based upon industry’s reporting in the most recent Toxic Release Inventory (TRI), the primary sources of heavy metal releases to the environment are mining and mining-related activities. The hard rock mining industry rel...

Graduation, retention and job market needs in Earth Science in Canada

NASA Astrophysics Data System (ADS)

Kosters, E. C.; Raeside, R.; Eaton, D. W.

2011-12-01

Ca. 40 Canadian university departments offer a range of Earth Science degree programs. Most departments participate in the Council of Chairs of Canadian Earth Science Departments, which has collected statistics since 1974. Ca. 5,000 students are currently enrolled in these programs, ca. 75% in BSc programs. Enrollment figures are cyclical, peaking in the early 1980`s and late 1990`s. Graduation figures and graduation-to-enrollment proportions suggest that retention averages about 90%. This figure is probably a bit flattered by students entering laterally after their second year. The % of women students in all BSc programs combined has remained more-or-less constant at 40% since data became available (1995), but the % of women students in MSc and PhD programs during this period rose significantly from <30% & <15% to ca. 40% & 35%, resp. The job market in Canada is largely resource-driven. Expected growth in mining and environmental/geotechnical (E/G) sectors outpaces those in petroleum, government and academia. Mining and E/G job opportunities are partly coupled as the mining sector increasingly employs E/G specialists. The petroleum industry is increasingly focused on unconventional plays, requiring re-examination and adaptation of traditional programs to ensure relevance. In addition, the aging petroleum industry infrastructure requires increasing numbers of environmental graduates. A 2007 CFES employer survey indicated that personnel in all Canadian sectors are aging, the E/G sector the least so, suggesting that the next generation is more motivated for E/G careers than for careers in resource extraction. Exceptions to this trend exist, mostly in regions where resource industries are prominent. The Canadian petroleum sector has traditionally largely recruited BSc-level graduates. The desire to upgrade educational credentials for greater international mobility within this sector is creating demand for graduate-degree upgrades. A different challenge characterizes the mining industry, which employs at least twice as many temporary workers than any other sector. Summer employment is an important career entry for students. Summer job recruitment in the private sector is poorly coordinated, as companies compete for the brightest students with an eye on their own future. Students perceive this practice as a problem, resulting in an increasing uptake in university-coordinated co op programs. Field-based summer jobs are largely with mining and E/G companies and geological surveys and many departments trust that such programs give their students necessary field training. Government cut backs and changing practices have drastically reduced these opportunities, leading to gaps in training and experience. Canada cannot rely on intensifying recruitment of 18-yr olds alone to satisfy its near-future employment needs and thus must turn to immigration, as also pointed out by other agencies. The government has recently relaxed immigration requirements for a number of professions, but earth scientists are not among these.

Impact of mine dumps on transport the invasive plant species to Upper Silesia

NASA Astrophysics Data System (ADS)

Sotkova, N.; Lokajickova, B.; Mec, J.; Svehlakova, H.; Stalmachova, B.

2017-10-01

Human activities significantly change the species composition in the area. The main factor of change was the mining industry, which changed the natural conditions on Upper Silesia. The anthropogenic relief of mine dumps are the main centre of alien plant in an industrial landscape. The poster deals with the state of the invasive plant species by the phyto-sociological surveys on Upper Silesia.

Bauxite Mining Sustainably

NASA Astrophysics Data System (ADS)

Atkins, Patrick R.; Bayliss, Chris; Ward, Sam

In 1990, the International Aluminum Institute began a program to report on the bauxite mining and rehabilitation activities of the worldwide industry. A survey process was initiated and reports were published in 1992, 2000 and 2004. The most recent report includes extensive data on mines representing over 70% of the world's output of bauxite and includes a more detailed focus on the social and economic as well as the environmental performance of the industry.

Geo-products of urban areas: Silesian Metropolis, Southern Poland

NASA Astrophysics Data System (ADS)

Chybiorz, Ryszard; Abramowicz, Anna

2017-04-01

Silesian Metropolis is located in the Silesian Voivodeship, in the most important industrial region in Poland. It consist of 14 cities with powiat rights, which create the largest urban center in Poland and one of the largest in Central and Eastern Europe. Almost 2 million people live in its territory. A large concentration of the population is associated with industrialization and especially with the development of the mining industry (Upper Silesian Coal Basin) and the processing industry (steelworks, textile industry) at the end of 19th century. One hundred years later, during the creation of the modern sectors of the economy, processes of metallurgy and mining restructuring have been started. Created mechanisms and conditions for development of post-industrial areas were consistent with the principles of sustainable development and had many new features, including cultural and touristic features. The Industrial Monuments Route was opened for the inhabitants and visitors in October 2006. The route joined the European Route of Industrial Heritage (ERIH) in 2010. Its most interesting mining attractions are located in Silesian Metropolis, and the most frequently visited object on the route is the Guido Historical Coal Mine in Zabrze and the Historical Silver Mine in Tarnowskie Góry. The project, which is realized in Zabrze, will provide for tourists a system of underground corridors, which were used for coal transportation in the 19th century. Visitors will be able to actively explore the work of miners, moving by underground boats, railway and suspension railway. Surface mines are also available for geotourists. The Ecological and Geological Education Center GEOsfera was created in a former Triassic quarry in Jaworzno. Although the area of the Silesian Metropolis is characterized by a very large devastation of the environment, the following objects were created (and are still created) on the basis of inanimate nature and they have a touristic value for the region and the country. Some of them already provide for the implementation of geotouristic purposes.

Interactive Hard Rock Mining 2006 Conference CD

EPA Science Inventory

This interactive conference CD provides a forum for the exchange of scientific information on current and future environmental issues which shape the future of the mining industry, including: base metals, precious metals, industrial minerals, and aggregates. The focus of the conf...

Heavy Metal Contamination Assessment and Partition for Industrial and Mining Gathering Areas

PubMed Central

Guan, Yang; Shao, Chaofeng; Ju, Meiting

2014-01-01

Industrial and mining activities have been recognized as the major sources of soil heavy metal contamination. This study introduced an improved Nemerow index method based on the Nemerow and geo-accumulation index. Taking a typical industrial and mining gathering area in Tianjin (China) as example, this study then analyzed the contamination sources as well as the ecological and integrated risks. The spatial distribution of the contamination level and ecological risk were determined using Geographic Information Systems. The results are as follows: (1) Zinc showed the highest contaminant level in the study area; the contamination levels of the other seven heavy metals assessed were relatively lower. (2) The combustion of fossil fuels and emissions from industrial and mining activities were the main sources of contamination in the study area. (3) The overall contamination level of heavy metals in the study area ranged from heavily contaminated to extremely contaminated and showed an uneven distribution. (4) The potential ecological risk showed an uneven distribution, and the overall ecological risk level ranged from low to moderate. This study also emphasized the importance of partition in industrial and mining areas, the extensive application of spatial analysis methods, and the consideration of human health risks in future studies. PMID:25032743

Evaluation of Metal Partitioning and Mobility in a Sulfidic Mine Tailing Pile under Oxic and Anoxic Conditions

EPA Science Inventory

Mining-influenced water emanating from mine tailings and potentially contaminating surface water and groundwater is one of the most important environmental issues linked to the mining industry. In this study, two subsets of Callahan Mine tailings (mainly comprised of silicates, ...

Using Dust Assessment Technology to Leverage Mine Site Manager-Worker Communication and Health Behavior: A Longitudinal Case Study

PubMed Central

Haas, Emily J.; Cecala, Andrew B.; Hoebbel, Cassandra L.

2016-01-01

Research continues to investigate barriers to managing occupational health and safety behaviors among the workforce. Recent literature argues that (1) there is a lack of consistent, multilevel communication and application of health and safety practices, and (2) social scientific methods are absent when determining how to manage injury prevention in the workplace. In response, the current study developed and tested a multilevel intervention case study at two industrial mineral mines to help managers and workers communicate about and reduce respirable silica dust exposures at their mine sites. A dust assessment technology, the Helmet-CAM, was used to identify and encourage communication about potential problem areas and tasks on site that contributed to elevated exposures. The intervention involved pre- and post-assessment field visits, four weeks apart that included multiple forms of data collection from workers and managers. Results revealed that mine management can utilize dust assessment technology as a risk communication tool to prompt and communicate about healthier behaviors with their workforce. Additionally, when workers were debriefed with the Helmet-CAM data through the device software, the dust exposure data can help improve the knowledge and awareness of workers, empowering them to change subtle behaviors that could reduce future elevated exposures to respirable silica dust. This case study demonstrates that incorporating social scientific methods into the application of health and safety management strategies, such as behavioral modification and technology integration, can leverage managers’ communication practices with workers, subsequently improving health and safety behaviors. PMID:26807445

Interaction of mining activities and aquatic environment: A review from Greek mine sites.

NASA Astrophysics Data System (ADS)

Vasileiou, Eleni; Kallioras, Andreas

2016-04-01

In Greece a significant amount of mineral and ore deposits have been recorded accompanied by large industrial interest and a long mining history. Today many active and/or abandoned mine sites are scattered within the country; while mining activities take place in different sites for exploiting various deposits (clay, limestone, slate, gypsum, kaolin, mixed sulphide ores (lead, zinc, olivine, pozzolan, quartz lignite, nickel, magnesite, aluminum, bauxite, gold, marbles etc). The most prominent recent ones are: (i) the lignite exploitation that is extended in the area of Ptolemais (Western Macedonia) and Megalopolis (Central Peloponnese); and (ii) the major bauxite deposits located in central Greece within the Parnassos-Ghiona geotectonic zone and on Euboea Island. In the latter area, significant ores of magnesite were exploited and mixed sulphide ores. Centuries of intensive mining exploitation and metallurgical treatment of lead-silver deposits in Greece, have also resulted in significant abandoned sites, such as the one in Lavrion. Mining activities in Lavrio, were initiated in ancient times and continued until the 1980s, resulting in the production of significant waste stockpiles deposited in the area, crucial for the local water resources. Ιn many mining sites, environmental pressures are also recorded after the mine closure to the aquatic environment, as the surface waters flow through waste dump areas and contaminated soils. This paper aims to the geospatial visualization of the mining activities in Greece, in connection to their negative (surface- and/or ground-water pollution; overpumping due to extensive dewatering practices) or positive (enhanced groundwater recharge; pit lakes, improvement of water budget in the catchment scale) impacts on local water resources.

Using RFID Tagging in a Mining Industry Maintenance, Repair, and Operating (MRO) Supply Warehouse: A Case Study

ERIC Educational Resources Information Center

Smith, George D.

2008-01-01

The use of Radio Frequency Identification (RFID) technology has been shown to be successful by reducing operating costs in the retail and manufacturing industries, but has never been considered in the literature for a mining industry maintenance, repair, and operating (MRO) supply chain. This field study was conducted to determine whether or not…

Ensuring the Environmental and Industrial Safety in Solid Mineral Deposit Surface Mining

NASA Astrophysics Data System (ADS)

Trubetskoy, Kliment; Rylnikova, Marina; Esina, Ekaterina

2017-11-01

The growing environmental pressure of mineral deposit surface mining and severization of industrial safety requirements dictate the necessity of refining the regulatory framework governing safe and efficient development of underground resources. The applicable regulatory documentation governing the procedure of ore open-pit wall and bench stability design for the stage of pit reaching its final boundary was issued several decades ago. Over recent decades, mining and geomechanical conditions have changed significantly in surface mining operations, numerous new software packages and computer developments have appeared, opportunities of experimental methods of source data collection and processing, grounding of the permissible parameters of open pit walls have changed dramatically, and, thus, methods of risk assessment have been perfected [10-13]. IPKON RAS, with the support of the Federal Service for Environmental Supervision, assumed the role of the initiator of the project for the development of Federal norms and regulations of industrial safety "Rules for ensuring the stability of walls and benches of open pits, open-cast mines and spoil banks", which contribute to the improvement of economic efficiency and safety of mineral deposit surface mining and enhancement of the competitiveness of Russian mines at the international level that is very important in the current situation.

Example Building Damage Caused by Mining Exploitation in Disturbed Rock Mass

NASA Astrophysics Data System (ADS)

Florkowska, Lucyna

2013-06-01

Issues concerning protection of buildings against the impact of underground coal mining pose significant scientific and engineering challenges. In Poland, where mining is a potent and prominent industry assuring domestic energy security, regions within reach of mining influences are plenty. Moreover, due to their industrial character they are also densely built-up areas. Because minerals have been extracted on an industrial scale in majority of those areas for many years, the rock mass structure has been significantly disturbed. Hence, exploitation of successive layers of multi-seam deposits might cause considerable damage - both in terms of surface and existing infrastructure networks. In the light of those facts, the means of mining and building prevention have to be improved on a regular basis. Moreover, they have to be underpinned by reliable analyses holistically capturing the comprehensive picture of the mining, geotechnical and constructional situation of structures. Scientific research conducted based on observations and measurements of mining-induced strain in buildings is deployed to do just that. Presented in this paper examples of damage sustained by buildings armed with protection against mining influences give an account of impact the mining exploitation in disturbed rock mass can have. This paper is based on analyses of mining damage to church and Nursing Home owned by Evangelical Augsburg Parish in Bytom-Miechowice. Neighbouring buildings differ in the date they were built, construction, building technology, geometry of the building body and fitted protection against mining damage. Both the buildings, however, have sustained lately significant deformation and damage caused by repeated mining exploitation. Selected damage has been discussed hereunder. The structures have been characterised, their current situation and mining history have been outlined, which have taken their toll on character and magnitude of damage. Description has been supplemented with photographic documentation.

Industrial Internet of Things

PubMed Central

Zhou, C.; Damiano, N.; Whisner, B.; Reyes, M.

2017-01-01

The Industrial Internet of Things (IIoT), a concept that combines sensor networks and control systems, has been employed in several industries to improve productivity and safety. U.S. National Institute for Occupational Safety and Health (NIOSH) researchers are investigating IIoT applications to identify the challenges of and potential solutions for transferring IIoT from other industries to the mining industry. Specifically, NIOSH has reviewed existing sensors and communications network systems used in U.S. underground coal mines to determine whether they are capable of supporting IIoT systems. The results show that about 40 percent of the installed post-accident communication systems as of 2014 require minimal or no modification to support IIoT applications. NIOSH researchers also developed an IIoT monitoring and control prototype system using low-cost microcontroller Wi-Fi boards to detect a door opening on a refuge alternative, activate fans located inside the Pittsburgh Experimental Mine and actuate an alarm beacon on the surface. The results of this feasibility study can be used to explore IIoT applications in underground coal mines based on existing communication and tracking infrastructure. PMID:29348699

Determination of velocity correction factors for real-time air velocity monitoring in underground mines.

PubMed

Zhou, Lihong; Yuan, Liming; Thomas, Rick; Iannacchione, Anthony

2017-12-01

When there are installations of air velocity sensors in the mining industry for real-time airflow monitoring, a problem exists with how the monitored air velocity at a fixed location corresponds to the average air velocity, which is used to determine the volume flow rate of air in an entry with the cross-sectional area. Correction factors have been practically employed to convert a measured centerline air velocity to the average air velocity. However, studies on the recommended correction factors of the sensor-measured air velocity to the average air velocity at cross sections are still lacking. A comprehensive airflow measurement was made at the Safety Research Coal Mine, Bruceton, PA, using three measuring methods including single-point reading, moving traverse, and fixed-point traverse. The air velocity distribution at each measuring station was analyzed using an air velocity contour map generated with Surfer ® . The correction factors at each measuring station for both the centerline and the sensor location were calculated and are discussed.

Development of technical means for directional hydraulic fracturing with shearing loading of borehole walls

NASA Astrophysics Data System (ADS)

Rybalkin, LA; Patutin, AV; Patutin, DV

2018-03-01

During the process of mineral deposits’ mining one of the most important conditions for safe and economically profitable work of a mining enterprise is obtaining timely information on the stress state of the developed massif. One of the most common methods of remote study of the geomechanical state of the rock massif is hydraulic fracturing of the formation. Directional hydraulic fracturing is a type of the method employed to form cracks across production wells. This technology was most widely used in the gas industry to extract gas from shale formations. In mining, this technology is used to set up filtration screens, to integrate degassing, to soften the hard roof of coal seams. Possible practical appliance is the expansion of the application field of this technology to intensify the production of viscous oil, to leach non-ferrous metals, to create in the rock massif anti-filtration screens for various purposes, as well as to measure stresses acting along the wells.

Submarine and deep-sea mine tailing placements: A review of current practices, environmental issues, natural analogs and knowledge gaps in Norway and internationally.

PubMed

Ramirez-Llodra, Eva; Trannum, Hilde C; Evenset, Anita; Levin, Lisa A; Andersson, Malin; Finne, Tor Erik; Hilario, Ana; Flem, Belinda; Christensen, Guttorm; Schaanning, Morten; Vanreusel, Ann

2015-08-15

The mining sector is growing in parallel with societal demands for minerals. One of the most important environmental issues and economic burdens of industrial mining on land is the safe storage of the vast amounts of waste produced. Traditionally, tailings have been stored in land dams, but the lack of land availability, potential risk of dam failure and topography in coastal areas in certain countries results in increasing disposal of tailings into marine systems. This review describes the different submarine tailing disposal methods used in the world in general and in Norway in particular, their impact on the environment (e.g. hyper-sedimentation, toxicity, processes related to changes in grain shape and size, turbidity), current legislation and need for future research. Understanding these impacts on the habitat and biota is essential to assess potential ecosystem changes and to develop best available techniques and robust management plans. Copyright © 2015 Elsevier Ltd. All rights reserved.

Determination of velocity correction factors for real-time air velocity monitoring in underground mines

PubMed Central

Yuan, Liming; Thomas, Rick; Iannacchione, Anthony

2017-01-01

When there are installations of air velocity sensors in the mining industry for real-time airflow monitoring, a problem exists with how the monitored air velocity at a fixed location corresponds to the average air velocity, which is used to determine the volume flow rate of air in an entry with the cross-sectional area. Correction factors have been practically employed to convert a measured centerline air velocity to the average air velocity. However, studies on the recommended correction factors of the sensor-measured air velocity to the average air velocity at cross sections are still lacking. A comprehensive airflow measurement was made at the Safety Research Coal Mine, Bruceton, PA, using three measuring methods including single-point reading, moving traverse, and fixed-point traverse. The air velocity distribution at each measuring station was analyzed using an air velocity contour map generated with Surfer®. The correction factors at each measuring station for both the centerline and the sensor location were calculated and are discussed. PMID:29201495

75 FR 8316 - Office of Postsecondary Education; Overview Information; Erma Byrd Scholarship Program; Notice...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-02-24

... Transmittal of Applications: March 26, 2010. Full Text of Announcement I. Funding Opportunity Description... related to industrial health and safety: Mining and mineral engineering, industrial engineering... technology/technician, hazardous materials information systems technology/technician, mining technology...

Uranium Mines and Mills | RadTown USA | US EPA

EPA Pesticide Factsheets

2017-08-07

Uranium is used as nuclear fuel for electric power generation. U.S. mining industries can obtain uranium in two ways: mining or milling. Mining waste and mill tailings can contaminate water, soil and air if not disposed of properly.

Biotechnology in the management and resource recovery from metal bearing solid wastes: Recent advances.

PubMed

Sethurajan, Manivannan; van Hullebusch, Eric D; Nancharaiah, Yarlagadda V

2018-04-01

Solid metalliferous wastes (sludges, dusts, residues, slags, red mud and tailing wastes) originating from ferrous and non-ferrous metallurgical industries are a serious environmental threat, when waste management practices are not properly followed. Metalliferous wastes generated by metallurgical industries are promising resources for biotechnological extraction of metals. These wastes still contain significant amounts of valuable non-ferrous metals, sometimes precious metals and also rare earth elements. Elemental composition and mineralogy of the metallurgical wastes is dependent on the nature of mining site and composition of primary ores mined. Most of the metalliferous wastes are oxidized in nature and contain less/no reduced sulfidic minerals (which can be quite well processed by biohydrometallurgy). However, application of biohydrometallurgy is more challenging while extracting metals from metallurgical wastes that contain oxide minerals. In this review, origin, elemental composition and mineralogy of the metallurgical solid wastes are presented. Various bio-hydrometallurgical processes that can be considered for the extraction of non-ferrous metals from metal bearing solid wastes are reviewed. Copyright © 2018 Elsevier Ltd. All rights reserved.

Human mining activity across the ages determines the genetic structure of modern brown trout (Salmo trutta L.) populations

PubMed Central

Paris, Josephine R; King, R Andrew; Stevens, Jamie R

2015-01-01

Humans have exploited the earth's metal resources for thousands of years leaving behind a legacy of toxic metal contamination and poor water quality. The southwest of England provides a well-defined example, with a rich history of metal mining dating to the Bronze Age. Mine water washout continues to negatively impact water quality across the region where brown trout (Salmo trutta L.) populations exist in both metal-impacted and relatively clean rivers. We used microsatellites to assess the genetic impact of mining practices on trout populations in this region. Our analyses demonstrated that metal-impacted trout populations have low genetic diversity and have experienced severe population declines. Metal-river trout populations are genetically distinct from clean-river populations, and also from one another, despite being geographically proximate. Using approximate Bayesian computation (ABC), we dated the origins of these genetic patterns to periods of intensive mining activity. The historical split of contemporary metal-impacted populations from clean-river fish dated to the Medieval period. Moreover, we observed two distinct genetic populations of trout within a single catchment and dated their divergence to the Industrial Revolution. Our investigation thus provides an evaluation of contemporary population genetics in showing how human-altered landscapes can change the genetic makeup of a species. PMID:26136823

Virtual reality for mine safety training.

PubMed

Filigenzi, M T; Orr, T J; Ruff, T M

2000-06-01

Mining has long remained one of America's most hazardous occupations. Researchers believe that by developing realistic, affordable VR training software, miners will be able to receive accurate training in hazard recognition and avoidance. In addition, the VR software will allow miners to follow mine evacuation routes and safe procedures without exposing themselves to danger. This VR software may ultimately be tailored to provide training in other industries, such as the construction, agricultural, and petroleum industries.

The Contribution of Individual, Social and Work Characteristics to Employee Mental Health in a Coal Mining Industry Population.

PubMed

Considine, Robyn; Tynan, Ross; James, Carole; Wiggers, John; Lewin, Terry; Inder, Kerry; Perkins, David; Handley, Tonelle; Kelly, Brian

2017-01-01

Evidence regarding the extent of mental health problems and the associated characteristics within an employee population is necessary to inform appropriate and tailored workplace mental health programs. Mental health within male dominated industries (such as mining) has received recent public attention, chiefly through observations regarding suicide in such populations in Australia and internationally. Currently there is limited empirical evidence regarding the mental health needs in the mining industry as an exemplar of a male dominated workforce, and the relative contribution to such problems of individual, socio-economic and workplace factors. This study aimed to investigate the mental health and associated characteristics among employees in the Australian coal mining industry with a specific focus on identifying modifiable work characteristics. A cross-sectional study was conducted among employees (n = 1457) across eight coal mines stratified by key mine characteristics (state, mine type and employee commute arrangements). Participants completed measures of psychological distress (K10+) and key variables across four categories (socio-demographic characteristics, health history, current health behaviours, work attitudes and characteristics). Psychological distress levels within this sample were significantly higher in comparison with a community sample of employed Australians. The following factors contributed significantly to levels of psychological distress using hierarchical linear regression analysis: lower social networks; a past history of depression, anxiety or drug/alcohol problems; high recent alcohol use; work role (managers) and a set of work characteristics (level of satisfaction with work, financial factors and job insecurity; perception of lower workplace support for people with mental health problems. This is the first study to examine the characteristics associated with mental health problems in the Australian coal mining industry. The findings indicate the salience of mental health needs in this population, and the associated interplay of personal, social and work characteristics. The work characteristics associated with psychological distress are modifiable and can guide an industry response, as well as help inform the understanding of the role of workplace factors in mental health problems in a male dominated workforce more generally.

The Contribution of Individual, Social and Work Characteristics to Employee Mental Health in a Coal Mining Industry Population

PubMed Central

James, Carole; Wiggers, John; Lewin, Terry; Inder, Kerry; Perkins, David; Handley, Tonelle

2017-01-01

Background Evidence regarding the extent of mental health problems and the associated characteristics within an employee population is necessary to inform appropriate and tailored workplace mental health programs. Mental health within male dominated industries (such as mining) has received recent public attention, chiefly through observations regarding suicide in such populations in Australia and internationally. Currently there is limited empirical evidence regarding the mental health needs in the mining industry as an exemplar of a male dominated workforce, and the relative contribution to such problems of individual, socio-economic and workplace factors. This study aimed to investigate the mental health and associated characteristics among employees in the Australian coal mining industry with a specific focus on identifying modifiable work characteristics. Methods A cross-sectional study was conducted among employees (n = 1457) across eight coal mines stratified by key mine characteristics (state, mine type and employee commute arrangements). Participants completed measures of psychological distress (K10+) and key variables across four categories (socio-demographic characteristics, health history, current health behaviours, work attitudes and characteristics). Results Psychological distress levels within this sample were significantly higher in comparison with a community sample of employed Australians. The following factors contributed significantly to levels of psychological distress using hierarchical linear regression analysis: lower social networks; a past history of depression, anxiety or drug/alcohol problems; high recent alcohol use; work role (managers) and a set of work characteristics (level of satisfaction with work, financial factors and job insecurity; perception of lower workplace support for people with mental health problems. Conclusion This is the first study to examine the characteristics associated with mental health problems in the Australian coal mining industry. The findings indicate the salience of mental health needs in this population, and the associated interplay of personal, social and work characteristics. The work characteristics associated with psychological distress are modifiable and can guide an industry response, as well as help inform the understanding of the role of workplace factors in mental health problems in a male dominated workforce more generally. PMID:28045935

The development and testing of a linear induction motor being fed from the source with limited electric power

NASA Astrophysics Data System (ADS)

Tiunov, V. V.

2018-02-01

The report provides results of the research related to the tubular linear induction motors’ application. The motors’ design features, a calculation model, a description of test specimens for mining and electric power industry are introduced. The most attention is given to the single-phase motors for high voltage switches drives with the usage of inexpensive standard single-phase transformers for motors’ power supply. The method of the motor’s parameters determination, when the motor is being fed from the transformer, working in the overload mode, was described, and the results of it practical usage were good enough for the engineering practice.

An index for drought induced financial risk in the mining industry

NASA Astrophysics Data System (ADS)

Bonnafous, L.; Lall, U.; Siegel, J.

2017-02-01

Water scarcity has emerged as a potential risk for mining operations. High capital spending for desalination and water conflicts leading to asset stranding have recently occurred. Investors in mining companies are interested in the exposure to such risks across portfolios of mining assets (whether the practical at-site consequences are foregone production, higher OPEX and CAPEX and ensuing lost revenues, or asset-stranding). In this paper, an index of the potential financial exposure of a portfolio is developed and its application is illustrated. Since the likely loss at each mine is hard to estimate a priori, one needs a proxy for potential loss. The index considers drought duration, severity and frequency (defined by a return-level in years) at each mining asset, and provides a measure of financial exposure through weighing of production or Net Asset Value. Changes in human needs are not considered, but are relevant, and could be incorporated if global data on mine and other water use were available at the appropriate resolution. Potential for contemporaneous drought incidence across sites in a portfolio is considered specifically. Through an appropriate choice of drought thresholds, an analyst can customize a scenario to assess potential losses in production value or profits, or whether conflicts could emerge that would lead to stranded assets or capital expenditure to secure alternate water supplies. Global climate data sets that allow a customized development of such an index are identified, and selected mining company portfolios are scored as to the risk associated with one publicly available drought index.

Long term contracts, expansion, innovation and stability: North Dakota's lignite mines thrive

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buchsbaum, L.

2009-08-15

North Dakota's lignite coal industry is mainly located in three countries in the central part of the state. Its large surface lignite mines are tied through long-term (20-40 years) contracts to power plants. The article talks about operations at three of the most productive mines - the Freedom mine, Falkirk mine and Center Mine. 4 figs.

The use of low-cost adsorbents for wastewater purification in mining industries.

PubMed

Iakovleva, Evgenia; Sillanpää, Mika

2013-11-01

Recently, great attention has been paid to the environmental problems in mining industry. At present there are different ways of mineral processing, as well as various methods of wastewater treatment, most of them are expensive. Work is ongoing to find low-cost treatments. In this article, low-cost adsorbents, potentially useful for wastewater treatment on mining and metallurgical plants, are reviewed; their characteristics, advantages, and disadvantages of their application are compared. Also adsorption of different metals and radioactive compounds from acidic environment similar to composition of mining and metallurgical wastewaters is considered.

Mineral resources management based on GIS and RS: a case study of the Laozhaiwan Gold Mine

NASA Astrophysics Data System (ADS)

Wu, Hao; Hua, Xianghong; Wang, Xinzhou; Ma, Liguang; Yuan, Yanbin

2005-10-01

With the development of digital information technology in mining industry, the concept of DM (Digital Mining) and MGIS (Mining Geographical Information System) are becoming the research focus but not perfect. How to effectively manage the dataset of geological, surveying and mineral products grade is the key point that concerned the sustainable development and standardized management in mining industry. Based on the existing combined GIS and remote sensing technology, we propose a model named DMMIS (Digital Mining Management Information System), which is composed of the database layer, the ActiveX layer and the user interface layer. The system is used in Laozhaiwan Gold Mine, Yunnan Province of China, which is shown to demonstrate the feasibility of the research and development achievement stated in this paper. Finally, some conclusions and constructive advices for future research work are given.

Analysis of Availability of Longwall-Shearer Based On Its Working Cycle

NASA Astrophysics Data System (ADS)

Brodny, Jaroslaw; Tutak, Magdalena

2017-12-01

Effective use of any type of devices, particularly machines has very significant meaning for mining enterprises. High costs of their purchase and tenancy cause that these enterprises tend to the best use of own technical potential. However, characteristics of mining production causes that this process not always proceeds without interferences. Practical experiences show that determination of objective measure of utilization of machine in mining company is not simple. In the paper methodology allowing to solve this problem is presented. Longwall-shearer, as the most important machine between longwall mechanical complex. Also it was assumed that the most significant meaning for determination of effectiveness of longwall-shearer has its availability, i.e. its effective time of work related to standard time. Such an approach is conforming to OEE model. However, specification of mining branch causes that determined availability do not give actual state of longwall-shearer’s operation. Therefore, this availability was related to the operation cycle of longwall-shearer. In presented example a longwall-shearer works in unidirectional cycle of mining. It causes that in one direction longwall-shearer mines, moving with operating velocity, and in other direction it does not mine and moves with manoeuvre velocity. Such defined working cycle became a base for determinate availability of longwall-shearer. Using indications of industrial automatic system for each of working shift there were determined number of cycles of longwall-shearer and availability of each one. Accepted of such way of determination of availability of longwall-shearer enabled to perform accurate analysis of losses of its availability. These losses result from non-planned shutdowns of longwall-shearer. Thanks to performed analysis based on the operating cycle of longwall-shearer time of its standstill for particular phase of cycle were determined. Presented methodology of determination of longwall-shearer’s availability enables to obtain information which may be used for optimization of mining process. Knowledge of particular phases of longwall-shearer’s operation, in which reduced availability occurs, allows to direct the repairing actions exactly to these regions. Developed methodology and obtained results create great opportunities for practical application and improvement of effectiveness of underground exploitation.

75 FR 82074 - Fee Adjustment for Testing, Evaluation, and Approval of Mining Products

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-29

..., and Approval of Mining Products AGENCY: Mine Safety and Health Administration (MSHA), Labor. ACTION..., evaluating, and approving mining products as provided by 30 CFR part 5. MSHA charges applicants a fee to... materials manufactured for use in the mining industry. The new fee schedule, effective January 1, 2011, is...

77 FR 61406 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2012-10-09

... Underground Coal Mining (0920-0835 Expiration 12/31/2012)--Revision--National Institute for Occupational... occupational safety and health problems in the coal mining industry. In recent years, coal mining safety has... health, the U.S. relies on coal mining to meet its electricity needs. For this reason, the coal mining...

The Conversion and Sustainable Use of Alumina Refinery Residues: Global Solution Examples

NASA Astrophysics Data System (ADS)

Fergusson, Lee

This paper introduces current industry best practice for the conversion of alumina refinery residues (or "red mud") from hazardous waste to benign, inert material. The paper will examine four neutralization methods and Basecon Technology, a sustainable conversion process. The paper will consider ways through which this converted material can be combined and processed for sustainable applications in the treatment of hazardous waste streams (such as industrial wastewater and sludges, biosolids, and CCA wastes), contaminated brownfield sites, and mine site wastes. Recent discoveries and applications, such as the successful treatment of high levels of radium in drinking water in the USA, will also be discussed. Examples of global solutions and their technical merits will be assessed.

An overview of the status of industrial minerals in the United States

USGS Publications Warehouse

Barsotti, Aldo F.

1999-01-01

The production and consumption of industrial minerals in the United States traditionally have played important roles in mining and in the supply of the bulk of basic raw materials to the economy. This diverse group of minerals extracted and consumed by a variety of industries accounts, on a weight and volume basis, for most mineral-based products consumed in our economy. Industrial minerals form the bulk of the basic raw-materials feedstock for most of the construction, agricultural, and inorganic-chemical-manufacturing sectors, and a good portion of the transportation, manufacturing, organic chemical, and service sectors of the U.S. economy. In this presentation, I discuss current estimates of the amount and value of industrial minerals mined compared with all mining in 1997. I then present a summary of 1997 production of industrial minerals by several end-use industries. This is followed by a historical perspective of the consumption of industrial minerals as a subset of all basic materials, with special emphasis on the aggregates industry. The presentation concludes with a look at the geographic distribution of industrial operations in the United States and some thoughts about the future.

Proximity to mining industry and respiratory diseases in children in a community in Northern Chile: A cross-sectional study.

PubMed

Herrera, Ronald; Radon, Katja; von Ehrenstein, Ondine S; Cifuentes, Stella; Muñoz, Daniel Moraga; Berger, Ursula

2016-06-07

In a community in northern Chile, explosive procedures are used by two local industrial mines (gold, copper). We hypothesized that the prevalence of asthma and rhinoconjunctivitis in the community may be associated with air pollution emissions generated by the mines. A cross-sectional study of 288 children (aged 6-15 years) was conducted in a community in northern Chile using a validated questionnaire in 2009. The proximity between each child's place of residence and the mines was assessed as indicator of exposure to mining related air pollutants. Logistic regression, semiparametric models and spatial Bayesian models with a parametric form for distance were used to calculate odds ratios and 95 % confidence intervals. The prevalence of asthma and rhinoconjunctivitis was 24 and 34 %, respectively. For rhinoconjunctivitis, the odds ratio for average distance between both mines and child's residence was 1.72 (95 % confidence interval 1.00, 3.04). The spatial Bayesian models suggested a considerable increase in the risk for respiratory diseases closer to the mines, and only beyond a minimum distance of more than 1800 m the health impact was considered to be negligible. The findings indicate that air pollution emissions related to industrial gold or copper mines mainly occurring in rural Chilean communities might increase the risk of respiratory diseases in children.

Sustainable mineral resources management: from regional mineral resources exploration to spatial contamination risk assessment of mining

NASA Astrophysics Data System (ADS)

Jordan, Gyozo

2009-07-01

Wide-spread environmental contamination associated with historic mining in Europe has triggered social responses to improve related environmental legislation, the environmental assessment and management methods for the mining industry. Mining has some unique features such as natural background contamination associated with mineral deposits, industrial activities and contamination in the three-dimensional subsurface space, problem of long-term remediation after mine closure, problem of secondary contaminated areas around mine sites, land use conflicts and abandoned mines. These problems require special tools to address the complexity of the environmental problems of mining-related contamination. The objective of this paper is to show how regional mineral resources mapping has developed into the spatial contamination risk assessment of mining and how geological knowledge can be transferred to environmental assessment of mines. The paper provides a state-of-the-art review of the spatial mine inventory, hazard, impact and risk assessment and ranking methods developed by national and international efforts in Europe. It is concluded that geological knowledge on mineral resources exploration is essential and should be used for the environmental contamination assessment of mines. Also, sufficient methodological experience, knowledge and documented results are available, but harmonisation of these methods is still required for the efficient spatial environmental assessment of mine contamination.

30 CFR 785.13 - Experimental practices mining.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 3 2011-07-01 2011-07-01 false Experimental practices mining. 785.13 Section 785.13 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER...

Chapter 5: Loosening compacted soils on mined lands

Treesearch

B. Strahm; R. Sweigard; J. Burger; D. Graves; C. Zipper; C. Barton; J. Skousen; P. Angel

2017-01-01

Successful surface coal mining businesses must move earth materials efficiently, so mining operations today depend on large and heavy equipment (Fig. 5-1). Track dozers and haul trucks used for mining can weigh more than 100 tons each. Wheel loaders and loaded haul trucks often exceed 200 tons. The mining industry has learned that successful reforestation of reclaimed...

Manpower for the coal mining industry: an assessment of adequacy through the year 2000. Volume II. Technical approach. Final technical report. [USA; forecasting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mendis, M.S.; Rosenberg, J.I.; Medville, D.M.

1980-03-01

This report presents a summary of the analytical approach taken and the conclusions reached in an assessment of the supply and demand for manpower in the coal mining industry through the year 2000. A hybrid system dynamics/econometric model of the coal mining industry was developed which incorporates relationships between technological change, labor productivity, production costs, wages, graduation rates, and other key variables in estimating imbalances between labor supply and demand. Study results indicate that while the supply of production workers is expected to be sufficient under most future demand scenarios, periodic shortages of experienced workers, especially in the Northern Greatmore » Plains can be expected. Other study findings are that the supply of mining engineers will be sufficient under all but the highest coal demand scenario, a shortage of faculty will affect the supply of mining engineers in the near-term and the employment of mining technicians is expected to exhibit the largest increase in any labor category studied. In this volume the nature of the coal mining manpower problem is discussed, a detailed description of that analysis conducted and the sources of data used is provided, and the findings of the study are presented.« less

Disposal and improvement of contaminated by waste extraction of copper mining in chile

NASA Astrophysics Data System (ADS)

Naranjo Lamilla, Pedro; Blanco Fernández, David; Díaz González, Marcos; Robles Castillo, Marcelo; Decinti Weiss, Alejandra; Tapia Alvarez, Carolina; Pardo Fabregat, Francisco; Vidal, Manuel Miguel Jordan; Bech, Jaume; Roca, Nuria

2016-04-01

This project originated from the need of a mining company, which mines and processes copper ore. High purity copper is produced with an annual production of 1,113,928 tons of concentrate to a law of 32%. This mining company has generated several illegal landfills and has been forced by the government to make a management center Industrial Solid Waste (ISW). The forecast volume of waste generated is 20,000 tons / year. Chemical analysis established that the studied soil has a high copper content, caused by nature or from the spread of contaminants from mining activities. Moreover, in some sectors, soil contamination by mercury, hydrocarbons and oils and fats were detected, likely associated with the accumulation of waste. The waters are also impacted by mining industrial tasks, specifically copper ores, molybdenum, manganese, sulfates and have an acidic pH. The ISW management center dispels the pollution of soil and water and concentrating all activities in a technically suitable place. In this center the necessary guidelines for the treatment and disposal of soil contamination caused by uncontrolled landfills are given, also generating a leachate collection system and a network of fluid monitoring physicochemical water quality and soil environment. Keywords: Industrial solid waste, soil contamination, Mining waste

Off-road truck-related accidents in U.S. mines

PubMed Central

Dindarloo, Saeid R.; Pollard, Jonisha P.; Siami-Irdemoosa, Elnaz

2016-01-01

Introduction Off-road trucks are one of the major sources of equipment-related accidents in the U.S. mining industries. A systematic analysis of all off-road truck-related accidents, injuries, and illnesses, which are reported and published by the Mine Safety and Health Administration (MSHA), is expected to provide practical insights for identifying the accident patterns and trends in the available raw database. Therefore, appropriate safety management measures can be administered and implemented based on these accident patterns/trends. Methods A hybrid clustering-classification methodology using K-means clustering and gene expression programming (GEP) is proposed for the analysis of severe and non-severe off-road truck-related injuries at U.S. mines. Using the GEP sub-model, a small subset of the 36 recorded attributes was found to be correlated to the severity level. Results Given the set of specified attributes, the clustering sub-model was able to cluster the accident records into 5 distinct groups. For instance, the first cluster contained accidents related to minerals processing mills and coal preparation plants (91%). More than two-thirds of the victims in this cluster had less than 5 years of job experience. This cluster was associated with the highest percentage of severe injuries (22 severe accidents, 3.4%). Almost 50% of all accidents in this cluster occurred at stone operations. Similarly, the other four clusters were characterized to highlight important patterns that can be used to determine areas of focus for safety initiatives. Conclusions The identified clusters of accidents may play a vital role in the prevention of severe injuries in mining. Further research into the cluster attributes and identified patterns will be necessary to determine how these factors can be mitigated to reduce the risk of severe injuries. Practical application Analyzing injury data using data mining techniques provides some insight into attributes that are associated with high accuracies for predicting injury severity. PMID:27620937

Sectoral linkage analysis of three main air pollutants in China's industry: Comparing 2010 with 2002.

PubMed

He, Weiwei; Wang, Yuan; Zuo, Jian; Luo, Yincheng

2017-11-01

To investigate the driving forces of air pollution in China, the changes in linkages amongst inter-industrial air pollutant emissions were analyzed by hypothetical extraction method under the input-output framework. Results showed that the emissions of SO 2 , soot and dust from industrial sources increased by 56.46%, 36.95% and 11.69% respectively in 2010, compared with 2002. As major contributors to emissions, the power and gas sectors were responsible for the growing SO 2 emissions, the nonmetal products sector for soot emissions, and the metals mining, smelting and pressing sectors for dust emissions. The increasing volume of emissions was mainly driven by the growing demand in the transport equipment and electrical equipment sectors. In addition, the expansion in the metals mining, smelting and pressing sectors could result in even more severe air pollution. Therefore, potential effective strategies to control air pollution in China are: (1) reducing the demand of major import sectors in the equipment manufacturing industry; (2) promoting R&D in low-emissions-production technologies to the power and gas sectors, the metals mining, smelting and pressing sectors, and the nonmetal products sector, and (3) auditing the considerable industrial scale expansion in the metals mining, smelting and pressing sectors and optimizing the industrial structure. Copyright © 2017 Elsevier Ltd. All rights reserved.

Vibration and recoil control of pneumatic hammers. [by air flow pressure regulation

NASA Technical Reports Server (NTRS)

Constantinescu, I. N.; Darabont, A. V.

1974-01-01

Vibration sources are described for pneumatic hammers used in the mining industry (pick hammers), in boiler shops (riveting hammers), etc., bringing to light the fact that the principal vibration source is the variation in air pressure inside the cylinder. The present state of the art of vibration control of pneumatic hammers as it is practiced abroad, and the solutions adopted for this purpose, are discussed. A new type of pneumatic hammer with a low noise and vibration level is presented.

Mining Task Force Report.

ERIC Educational Resources Information Center

Saskatchewan Inst. of Applied Science and Technology, Saskatoon.

In fall 1988, the Board of Directors of the Saskatchewan Institute of Applied Science and Technology (SIAST) created a task force to study the training needs of the mining industry in the province and evaluate SIAST's responsiveness to those needs. After assessing the technological changes taking place in the industry, surveying manpower needs,…

Hamilton County: A Rural School District Profile.

ERIC Educational Resources Information Center

Harned, Catherine

Using state education agency, census, industry employment and occupational information data, this paper provides a detailed picture of a rural school district in Southern Illinois. Mining and agriculture are the major industries in Hamilton County. The major mining employer closed in February 1988, and the drought of 1988 is likely to adversely…

'Fishing' for Alternatives to Mountaintop Mining in Southern West Virginia

EPA Science Inventory

Mountaintop removal mining (MTR) is a major industry in southern West Virginia with many detrimental effects for small to mid-sized streams, and interest in alternative, sustainable industries is on the rise. As a first step in a larger effort to assess the value of sport fisheri...

Interstitial Lung Diseases in the U.S. Mining Industry: Using MSHA Data to Examine Trends and the Prevention Effects of Compliance with Health Regulations, 1996-2015.

PubMed

Yorio, Patrick L; Laney, A Scott; Halldin, Cara N; Blackley, David J; Moore, Susan M; Wizner, Kerri; Radonovich, Lewis J; Greenawald, Lee A

2018-04-12

Given the recent increase in dust-induced lung disease among U.S. coal miners and the respiratory hazards encountered across the U.S. mining industry, it is important to enhance an understanding of lung disease trends and the organizational contexts that precede these events. In addition to exploring overall trends reported to the Mine Safety and Health Administration (MSHA), the current study uses MSHA's enforcement database to examine whether or not compliance with health regulations resulted in fewer mine-level counts of these diseases over time. The findings suggest that interstitial lung diseases were more prevalent in coal mines compared to other mining commodities, in Appalachian coal mines compared to the rest of the United States, and in underground compared to surface coal mines. Mines that followed a relevant subset of MSHA's health regulations were less likely to report a lung disease over time. The findings are discussed from a lung disease prevention strategy perspective. © 2018 Society for Risk Analysis.

The Experience of Implementation of Innovative Technology of Quarry Waste Water Purifying in Kuzbass Open Pit

NASA Astrophysics Data System (ADS)

Lesin, Yu V.; Hellmer, M. C.

2016-08-01

Among all industries in Kuzbass (Western Siberia, Russia) the coal industry provides the most environmental threat. However, the construction of new and maintenance of existing open pit mines do not often correspond to the tasks of improving the environmental safety of surface mining. So the article describes the use of innovative quarry waste water purifying technology implemented in Kuzbass open pit mine «Shestaki». This technology is based on using artificial filter arrays made of overburden rock.

Mine Water Treatment in Hongai Coal Mines

NASA Astrophysics Data System (ADS)

Dang, Phuong Thao; Dang, Vu Chi

2018-03-01

Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

The contributions of human factors and ergonomics to a sustainable minerals industry.

PubMed

Horberry, Tim; Burgess-Limerick, Robin; Fuller, Ruth

2013-01-01

This article describes examples of the application of human factors research and development work to a sustainable minerals industry. It begins by outlining human-related aspects of the minerals industry and the key human factors work previously undertaken in this domain. The focus then switches to sustainability in the minerals industry. Sustainability principles are introduced and illustrations provided of how human factors research and development work fits within such a framework. Three case studies of human factors in the minerals industry research are presented and the sustainability implications in each case study are highlighted. Finally, future trends related to human factors work in a sustainable minerals industry are addressed, in particular the opportunities and possible adverse consequences that increasing deployment of mining automation might bring. Minerals industries are a major global activity with significant sustainability implications. Aspects of sustainability in mining are examined using three case studies. These illustrate the contribution of human factors/ergonomics in reducing risks; developing emergency response management systems; and the value of participatory ergonomics in improving the design of mining equipment.

Automation of the longwall mining system

NASA Technical Reports Server (NTRS)

Zimmerman, W.; Aster, R. W.; Harris, J.; High, J.

1982-01-01

Cost effective, safe, and technologically sound applications of automation technology to underground coal mining were identified. The longwall analysis commenced with a general search for government and industry experience of mining automation technology. A brief industry survey was conducted to identify longwall operational, safety, and design problems. The prime automation candidates resulting from the industry experience and survey were: (1) the shearer operation, (2) shield and conveyor pan line advance, (3) a management information system to allow improved mine logistics support, and (4) component fault isolation and diagnostics to reduce untimely maintenance delays. A system network analysis indicated that a 40% improvement in productivity was feasible if system delays associated with all of the above four areas were removed. A technology assessment and conceptual system design of each of the four automation candidate areas showed that state of the art digital computer, servomechanism, and actuator technologies could be applied to automate the longwall system.

Intelligent Mining Engineering Systems in the Structure of Industry 4.0

NASA Astrophysics Data System (ADS)

Rylnikova, Marina; Radchenko, Dmitriy; Klebanov, Dmitriy

2017-11-01

The solution of the problem of improving the human environment and working conditions at mines is based on the provision of the rationale of parameters and conditions for the implementation of an environmentally balanced cycle of comprehensive development of mineral deposits on the basis of the design of mining engineering systems characterized by the minimization of the human factor effect in danger zones of mining operations. In this area, robotized technologies are being developed, machinery and mechanisms with the elements of artificial intelligence, and mining and transport system automatic controls are being put into service throughout the world. In the upcoming decades, mining machines and mechanisms will be virtually industrial robots. The article presents the results of zoning of open-pit and underground mine production areas, as well as mining engineering system of combined development depending on the fact and periodicity of human presence in zones of mining processes. As a surface geotechnology case study, the software structure based on a modular concept is described. The performance philosophy of mining and transport equipment with the elements of artificial intelligence is shown when it is put into service in an open pit.

An environmental partnership - hawks and highwalls at the Jim Bridger mine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Harshbarger, R.M.

1996-12-31

Can industry and the environment coexist to the benefit of both? More specifically can coal mining and the environment have beneficial partnerships? Based on information normally available in the popular press, a partnership would seem impossible. Millions of pages and thousands of hours of air time have been used to convey a misinformed message that mining is always detrimental to the environment. The message is clear and one sided. Mining companies destroy the environment in their greed to extract mineral wealth from the ground. They leave barren, disturbed landscapes devoid of life. Mining and the environment can not coexist. Theremore » can be no partnership. Bridger Coal Company`s environmental programs, including the raptor mitigation program, demonstrate that mining companies in cooperation with regulatory agencies can utilize the latest scientific developments to protect environmental resources, maintain operational efficiency and in the process raise the industry standard.« less

Atmospheric carbon mineralization in an industrial-scale chrysotile mining waste pile.

PubMed

Nowamooz, Ali; Dupuis, J Christian; Beaudoin, Georges; Molson, John; Lemieux, Jean-Michel; Horswill, Micha; Fortier, Richard; Larachi, Faïçal; Maldague, Xavier; Constantin, Marc; Duchesne, Josee; Therrien, René

2018-06-12

Magnesium rich minerals that are abundant in ultramafic mining waste have the potential to be used as a safe and permanent sequestration solution for carbon dioxide (CO2). Our understanding of thermo-hydro-chemical regimes that govern this reaction at an industrial scale, however, has remained an important challenge to its widespread implementation. Through a year-long monitoring experiment performed at a 110Mt chrysotile waste pile, we have documented the existence of two distinct thermo-hydro-chemical regimes that control the ingress of CO2 and the subsequent mineral carbonation of the waste. The experimental results are supported by coupled free-air/porous media numerical flow and transport model that provides insights into optimization strategies to increase the efficiency of mineral sequestration at an industrial-scale. Although functioning passively under less than optimal conditions compared to lab-scale experiments, the 110Mt Thetford Mines pile is nevertheless estimated to be sequestering up to 100 tonnes of CO2 per year, with a potential total carbon capture capacity under optimal conditions of 3 Mt. Yearly, over 100 Mt of ultramafic mine waste suitable for mineral carbonation are generated by the global mining industry. Our results show that this waste material could become a safe and permanent carbon sink for diffuse sources of CO2.

Experience in the Education of Engineers from Vietnam in the Faculty of Mining and Geoengineering AGH

NASA Astrophysics Data System (ADS)

Cała, Marek; Borowski, Marek

2018-03-01

The AGH University of Science and Technology collaborates closely with other universities, economic units, governmental and local administrative bodies. International cooperation plays a very important role in the academic research. The AGH University of Science and Technology has signed many collaboration agreements. They aim at multidimensional cooperation in the fields of education and academic research. AGH UST has always focused on collaboration with business and industry. In recent years, the global economy is undergoing massive transformations, what creates new challenges to companies and educational institutions that cater to the needs of industry. The expansion of business enterprises is largely dependent on their employees' expertise, skills and levels of competence. Certified engineers are provided by universities. Therefore, the qualifications of the graduates are determined by the curriculum and teaching methods, as well as the available educational and research facilities. Of equal importance is the qualified academic staff. Human activities in the field of engineering require finding solutions to problems of various nature and magnitude. An engineer's work consists in the design, construction, modification and maintenance of useful devices, processes and systems, using scientific and technical knowledge. In order to design complex engineering solutions, an engineer uses his imagination, experience, analytical skills, logical reasoning and makes conscious use of his knowledge. At the Faculty of Mining and Geoengineering of the AGH University of Science and Technology in Cracow, 15 engineers from Vietnam are studying Mining and Geology at the second-cycle studies (specialization: mine ventilation). The solutions proposed in the field of the engineers' education guarantee that foreign students gain both engineering knowledge and problem-solving skills. Therefore, the study programme was complemented by a series of practical aspects.

Fuelcell-Hybrid Mine loader (LHD)

DOE Office of Scientific and Technical Information (OSTI.GOV)

James L Dippo; Tim Erikson; Kris Hess

2009-07-10

The fuel cell hybrid mine loader project, sponsored by a government-industry consortium, was implemented to determine the viability of proton exchange membrane (PEM) fuel cells in underground mining applications. The Department of Energy (DOE) sponsored this project with cost-share support from industry. The project had three main goals: (1) to develop a mine loader powered by a fuel cell, (2) to develop associated metal-hydride storage and refueling systems, and (3) to demonstrate the fuel cell hybrid loader in an underground mine in Nevada. The investigation of a zero-emissions fuel cell power plant, the safe storage of hydrogen, worker health advantagesmore » (over the negative health effects associated with exposure to diesel emissions), and lower operating costs are all key objectives for this project.« less

78 FR 54278 - Proposed Information Collection; Safety Defects; Examination, Correction and Records, (Pertains...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-09-03

... helps to assure that requested data can be provided in the desired format, reporting burden (time and... unfired pressure vessels have caused injuries and fatalities in the mining industry. Records of... and fatalities in the mining industry. Inspection of this equipment prior to use is required to ensure...

Sources and management of hazardous waste in Papua New Guinea

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singh, K.

1996-12-31

Papua New Guinea (PNG) has considerable mineral wealth, especially in gold and copper. Large-scale mining takes place, and these activities are the source of most of PNG`s hazardous waste. Most people live in small farming communities throughout the region. Those living adjacent to mining areas have experienced some negative impacts from river ecosystem damage and erosion of their lands. Industry is centered mainly in urban areas and Generates waste composed of various products. Agricultural products, pesticide residues, and chemicals used for preserving timber and other forestry products also produce hazardous waste. Most municipal waste comes from domestic and commercial premises;more » it consists mainly of combustibles, noncombustibles, and other wastes. Hospitals generate pathogenic organisms, radioactive materials, and chemical and pharmaceutical laboratory waste. Little is known about the actual treatment of waste before disposal in PNG. Traditional low-cost waste disposal methods are usually practiced, such as use of landfills; storage in surface impoundments; and disposal in public sewers, rivers, and the sea. Indiscriminate burning of domestic waste in backyards is also commonly practiced in urban and rural areas. 10 refs., 4 tabs.« less

Occupational Health and Safety Management and Turnover Intention in the Ghanaian Mining Sector

PubMed Central

Amponsah-Tawiah, Kwesi; Ntow, Michael Akomeah Ofori; Mensah, Justice

2015-01-01

Background The mining industry is considered as one of the most dangerous and hazardous industries and the need for effective and efficient occupational health and safety management is critical to safeguard workers and the industry. Despite the dangers and hazards present in the mining industry, only few studies have focused on how occupational health and safety and turnover intentions in the mines. Method The study suing a cross-sectional survey design collected quantitative data from the 255 mine workers that were conveniently sampled from the Ghanaian mining industry. The data collection tools were standardized questionnaires that measured occupational health and safety management and turnover intentions. These scales were also pretested before their usage in actual data collection. Results The correlation coefficient showed that a negative relationship existed between dimensions of occupational health and safety management and turnover intention; safety leadership (r = −0.33, p < 0.01); supervision (r = −0.26, p < 0.01); safety facilities and equipment (r = −0.32, p < 0.01); safety procedure (r = −0.27, p < 0.01). Among these dimensions, safety leadership and safety facility were significant predictors of turnover intention, (β = −0.28, p < 0.01) and (β = −0.24, p < 0.01) respectively. The study also found that turnover intention of employees is heavily influenced by the commitment of safety leadership in ensuring the effective formulation of policies and supervision of occupational health and safety at the workplace. Conclusion The present study demonstrates that safety leadership is crucial in the administration of occupational health and safety and reducing turnover intention in organizations. PMID:27014486

Occupational Health and Safety Management and Turnover Intention in the Ghanaian Mining Sector.

PubMed

Amponsah-Tawiah, Kwesi; Ntow, Michael Akomeah Ofori; Mensah, Justice

2016-03-01

The mining industry is considered as one of the most dangerous and hazardous industries and the need for effective and efficient occupational health and safety management is critical to safeguard workers and the industry. Despite the dangers and hazards present in the mining industry, only few studies have focused on how occupational health and safety and turnover intentions in the mines. The study suing a cross-sectional survey design collected quantitative data from the 255 mine workers that were conveniently sampled from the Ghanaian mining industry. The data collection tools were standardized questionnaires that measured occupational health and safety management and turnover intentions. These scales were also pretested before their usage in actual data collection. The correlation coefficient showed that a negative relationship existed between dimensions of occupational health and safety management and turnover intention; safety leadership (r = -0.33, p < 0.01); supervision (r = -0.26, p < 0.01); safety facilities and equipment (r = -0.32, p < 0.01); safety procedure (r = -0.27, p < 0.01). Among these dimensions, safety leadership and safety facility were significant predictors of turnover intention, (β = -0.28, p < 0.01) and (β = -0.24, p < 0.01) respectively. The study also found that turnover intention of employees is heavily influenced by the commitment of safety leadership in ensuring the effective formulation of policies and supervision of occupational health and safety at the workplace. The present study demonstrates that safety leadership is crucial in the administration of occupational health and safety and reducing turnover intention in organizations.

A case in support of implementing innovative bio-processes in the metal mining industry.

PubMed

Sánchez-Andrea, Irene; Stams, Alfons J M; Weijma, Jan; Gonzalez Contreras, Paula; Dijkman, Henk; Rozendal, Rene A; Johnson, D Barrie

2016-06-01

The metal mining industry faces many large challenges in future years, among which is the increasing need to process low-grade ores as accessible higher grade ores become depleted. This is against a backdrop of increasing global demands for base and precious metals, and rare earth elements. Typically about 99% of solid material hauled to, and ground at, the land surface currently ends up as waste (rock dumps and mineral tailings). Exposure of these to air and water frequently leads to the formation of acidic, metal-contaminated run-off waters, referred to as acid mine drainage, which constitutes a severe threat to the environment. Formation of acid drainage is a natural phenomenon involving various species of lithotrophic (literally 'rock-eating') bacteria and archaea, which oxidize reduced forms of iron and/or sulfur. However, other microorganisms that reduce inorganic sulfur compounds can essentially reverse this process. These microorganisms can be applied on industrial scale to precipitate metals from industrial mineral leachates and acid mine drainage streams, resulting in a net improvement in metal recovery, while minimizing the amounts of leachable metals to the tailings storage dams. Here, we advocate that more extensive exploitation of microorganisms in metal mining operations could be an important way to green up the industry, reducing environmental risks and improving the efficiency and the economy of metal recovery. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

A review of mortality associated with elongate mineral particle (EMP) exposure in occupational epidemiology studies of gold, talc, and taconite mining.

PubMed

Mandel, Jeffrey H; Alexander, Bruce H; Ramachandran, Gurumurthy

2016-12-01

Mining of gold, taconite, and talc may involve exposure to elongate mineral particles (EMP). The involved EMPs are typically non-asbestiform, include dimensions that regulatory definitions exclude, and have been less studied. A review of the literature was undertaken for this exposure and occupational epidemiological studies that occur in gold, talc, and taconite mining. Quantitative EMP exposure information in these industries is incomplete. However, there are consistent findings of pneumoconiosis in each of these types of mining. A recent case-control study suggests a possible association between this exposure and mesothelioma. Lung cancer is inconsistently reported in these industries and is an unlikely outcome of non-asbestiform EMP exposure. There is evidence of cardiovascular mortality excess across all of these types of mining. Non-malignant respiratory disease and cardiovascular mortality have been consistently increased in these industries. Further investigation, including additional insights for the role of non-asbestiform EMP, is warranted. Am. J. Ind. Med. 59:1047-1060, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

North American Bats and Mines Project: A cooperative approach for integrating bat conservation and mine-land reclamation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ducummon, S.L.

Inactive underground mines now provide essential habitat for more than half of North America`s 44 bat species, including some of the largest remaining populations. Thousands of abandoned mines have already been closed or are slated for safety closures, and many are destroyed during renewed mining in historic districts. The available evidence suggests that millions of bats have already been lost due to these closures. Bats are primary predators of night-flying insects that cost American farmers and foresters billions of dollars annually, therefore, threats to bat survival are cause for serious concern. Fortunately, mine closure methods exist that protect both batsmore » and humans. Bat Conservation International (BCI) and the USDI-Bureau of Land Management founded the North American Bats and Mines Project to provide national leadership and coordination to minimize the loss of mine-roosting bats. This partnership has involved federal and state mine-land and wildlife managers and the mining industry. BCI has trained hundreds of mine-land and wildlife managers nationwide in mine assessment techniques for bats and bat-compatible closure methods, published technical information on bats and mine-land management, presented papers on bats and mines at national mining and wildlife conferences, and collaborated with numerous federal, state, and private partners to protect some of the most important mine-roosting bat populations. Our new mining industry initiative, Mining for Habitat, is designed to develop bat habitat conservation and enhancement plans for active mining operations. It includes the creation of cost-effective artificial underground bat roosts using surplus mining materials such as old mine-truck tires and culverts buried beneath waste rock.« less

Elevated Mercury Concentrations in Humans of Madre de Dios, Peru

PubMed Central

Ashe, Katy

2012-01-01

The enormous increase in practically unregulated mining in Madre de Dios Peru is leading to massive release of liquid elemental mercury to the environment. Rapidly increasing global prices for gold are causing a massive upsurge in artisanal mining in the Peruvian Amazon, considered to be one of the most biodiverse places on the planet. This study identifies the current levels of mercury in the human population, through identifying levels of total mercury in human hair in mining zones of Madre de Dios Department and in the nearby city of Puerto Maldonado. A regression analysis reveals that fish consumption, gender, and location of residence were significant indicators of mercury levels; while duration of residence and age had no significant relationship to mercury levels. Increased fish consumption levels were the strongest indicators of increased total mercury levels across the entire population. The levels of total mercury in hair was significantly (α = 0.05) higher in mining zones, than Puerto Maldonado. In both areas men had significantly higher levels than women, likely due to a difference in metabolism or varying levels of direct involvement in gold mining- a male predominated industry. This is the first study to show the health threat that mercury poses to this region, however further research needs to be done to gain a more refined understanding of the predominant routes of exposure in this population. PMID:22438911

Elevated mercury concentrations in humans of Madre de Dios, Peru.

PubMed

Ashe, Katy

2012-01-01

The enormous increase in practically unregulated mining in Madre de Dios Peru is leading to massive release of liquid elemental mercury to the environment. Rapidly increasing global prices for gold are causing a massive upsurge in artisanal mining in the Peruvian Amazon, considered to be one of the most biodiverse places on the planet. This study identifies the current levels of mercury in the human population, through identifying levels of total mercury in human hair in mining zones of Madre de Dios Department and in the nearby city of Puerto Maldonado. A regression analysis reveals that fish consumption, gender, and location of residence were significant indicators of mercury levels; while duration of residence and age had no significant relationship to mercury levels. Increased fish consumption levels were the strongest indicators of increased total mercury levels across the entire population. The levels of total mercury in hair was significantly (α = 0.05) higher in mining zones, than Puerto Maldonado. In both areas men had significantly higher levels than women, likely due to a difference in metabolism or varying levels of direct involvement in gold mining- a male predominated industry. This is the first study to show the health threat that mercury poses to this region, however further research needs to be done to gain a more refined understanding of the predominant routes of exposure in this population.

Measuring mining safety with injury statistics: lost workdays as indicators of risk.

PubMed

Coleman, Patrick J; Kerkering, John C

2007-01-01

Mining in the United States remains one of the most hazardous industries, despite significant reductions in fatal injury rates over the last century. Coal mine fatality rates, for example, have dropped almost a thousand-fold since their peak in 1908. While incidence rates are very important indicators, lost worktime measures offer an alternative metric for evaluating job safety and health performance. The first objective of this study examined the distributions and summary statistics of all injuries reported to the Mine Safety and Health Administration from 1983 through 2004. Over the period studied (1983-2004), there were 31,515,368 lost workdays associated with mining injuries, for an equivalent of 5,700 person-years lost annually. The second objective addressed the problem of comparing safety program performance in mines for situations where denominator data were lacking. By examining the consequences of injuries, comparisons can be made between disparate operations without the need for denominators. Total risk in the form of lost workday sums can help to distinguish between lower- and higher-risk operations or time periods. Our method was to use a beta distribution to model the losses and to compare underground coal mining to underground metal/nonmetal mining from 2000 to 2004. Our results showed the probability of an injury having 10 or more lost workdays was 0.52 for coal mine cases versus 0.35 for metal/nonmetal mine cases. In addition, a comparison of injuries involving continuous mining machines over 2001-2002 versus 2003-2004 showed that the ratio of average losses in the later period to those in the earlier period was approximately 1.08, suggesting increasing risks for such operations. This denominator-free safety measure will help the mining industry more effectively identify higher-risk operations and more realistically evaluate their safety improvement programs. Attention to a variety of metrics concerning the performance of a job safety and health program will enhance industry's ability to manage these programs and reduce risk.

The research of structure and mechanical properties of superhard electro-spark coatings for hardwearing mining tools

NASA Astrophysics Data System (ADS)

Bajin, P. A.; Chijikov, A. P.; Leybo, D. V.; Chuprunov, K. O.; Yudin, A. G.; Alymov, M. A.; Kuznetsov, D. V.

2016-01-01

The development of low cost and hardwearing mining tools is one of the most important areas in mining industry. It is especially important for technologies of rare and rare earth metals mining due to high hardness of related ores. Coatings for electrodes, produced by extrusion of self-propagating high temperature synthesis (SHS) products from hard-alloyed materials with nanosized structure, for further application in processes of electrospark alloying and deposition were studied in this work. The results of microstructure and properties of deposited layers, interaction of support with SHS produced electrodes, comparison of frictional properties of obtained materials as well as some industrial testing results are presented in this work.

Engineering and public health at CDC.

PubMed

Earnest, G Scott; Reed, Laurence D; Conover, D; Estill, C; Gjessing, C; Gressel, M; Hall, R; Hudock, S; Hudson, H; Kardous, C; Sheehy, J; Topmiller, J; Trout, D; Woebkenberg, M; Amendola, A; Hsiao, H; Keane, P; Weissman, D; Finfinger, G; Tadolini, S; Thimons, E; Cullen, E; Jenkins, M; McKibbin, R; Conway, G; Husberg, B; Lincoln, J; Rodenbeck, S; Lantagne, D; Cardarelli, J

2006-12-22

Engineering is the application of scientific and technical knowledge to solve human problems. Using imagination, judgment, and reasoning to apply science, technology, mathematics, and practical experience, engineers develop the design, production, and operation of useful objects or processes. During the 1940s, engineers dominated the ranks of CDC scientists. In fact, the first CDC director, Assistant Surgeon General Mark Hollis, was an engineer. CDC engineers were involved in malaria control through the elimination of standing water. Eventually the CDC mission expanded to include prevention and control of dengue, typhus, and other communicable diseases. The development of chlorination, water filtration, and sewage treatment were crucial to preventing waterborne illness. Beginning in the 1950s, CDC engineers began their work to improve public health while developing the fields of environmental health, industrial hygiene, and control of air pollution. Engineering disciplines represented at CDC today include biomedical, civil, chemical, electrical, industrial, mechanical, mining, and safety engineering. Most CDC engineers are located in the National Institute for Occupational Safety and Health (NIOSH) and the Agency for Toxic Substances and Disease Registry (ATSDR). Engineering research at CDC has a broad stakeholder base. With the cooperation of industry, labor, trade associations, and other stakeholders and partners, current work includes studies of air contaminants, mining, safety, physical agents, ergonomics, and environmental hazards. Engineering solutions remain a cornerstone of the traditional "hierarchy of controls" approach to reducing public health hazards.

HARDROCK MINING 2002 CALL FOR ABSTRACTS

EPA Science Inventory

This flyer will announcement the Hardrock Mining 2002 Conference on May 7-9/2002 in Westminster, CO. This conference will provide participants with an opportunity to examine and discuss current and future environmental issues shaping the hardrock mining industry with emphasis on ...

Social license to operate: case from brazilian mining industry

NASA Astrophysics Data System (ADS)

Santiago, Ana Lúcia F.; Demajorovic, Jacques; Aledo, Antonio

2015-04-01

The approach of the Social License to Operate (SLO) emerges as an important element in academic discussions and business practices related to extractive industries. It appears that in productive activities with great potential to produce economic, social and environmental impacts, conventional approaches based on legal compliance no longer sufficient to legitimize the actions of companies and engagement stakeholders. Studies highlight the need of mining activities receiving a SLO "issued" by companies stakeholders, including society, government, non-governmental organizations, media and communities. However, local communities appears as major stakeholders in governance arrangements, by virtue of its proximity to extractive areas and ability to affect the company's results. Stakeholders with unmet expectations can generate conflicts and risks to the company, the knowledge of these expectations and an awareness of company managers of the importance of Social License to Operate (SLO), can generate strategies and mitigating actions to prevent and or minimize possible conflicts. The concept of SLO arises in engineering extractive industry, when you need to respond to social challenges, beyond the usual environmental challenges, technological and management. According to Franks and Cohen (2012) there is a tendency of engineering sectors, sustainability, environmental, safety and especially in risk mappings, treat the technological issues in a neutral manner, separating the technological research projects of social influences. I want to contribute to the advancement of the debate on stakeholder engagement and adopting as focus on the company's relationship with the community, the aim of this study was to understand how a social project held by one of the largest mining companies in Brazil contributed to the process of SLO. This methodological procedure adopted was a qualitative, descriptive, and exploratory interviews with the communities located in rural areas of direct influence of the company's approach. The results show that the strategy adopted by the company contributed to the process of SLO, furthermore it is necessary adopt strong methodologies that facilitate the engagement processes of the other company's stakeholders, as well as the challenge to keep on local legitimacy earned. Key words: Mining, social license to operate (SLO), social impact, corporate social responsibility, stakeholders. References: * FRANKS, DANIEL M.; COHEN, TAMAR. Social Licence in Design: Constructive technology assessment within a mineral research and development institution. Centre for Social Responsibility in Mining, Sustainable Minerals Institute, University of Queensland, Australia. 79 122 Technological Forecasting & Social Change. 2012.

Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry

NASA Technical Reports Server (NTRS)

Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T. V.

1974-01-01

The author has identified the following significant results. The mine refuse inventory maps were prepared in response to a need by both the State and the coal industry. The lack of information on the scope of the problem handicapped all people concerned in drafting realistic legislation for a severance tax on coal production to raise funds for restoration of refuse sites. The inventory was conducted rapidly and economically, and demonstrated the benefits which can be derived through remote sensing methods.

75 FR 4848 - Proposed Information Collection Request Submitted for Public Comment and Recommendations

Federal Register 2010, 2011, 2012, 2013, 2014

2010-01-29

... and slope construction (pertains to coal mining industry). ACTION: Notice. SUMMARY: The Department of... Reduction Act of 1995 (PRA95) [44 U.S.C. 3506(c)(2)(A)]. This program helps to ensure that requested data... shaft and slope construction pertaining to the coal mining industry. DATES: Submit comments on or before...

Lung, gastric and colorectal cancer mortality by occupation and industry among working-aged men in Japan.

PubMed

Eguchi, Hisashi; Wada, Koji; Prieto-Merino, David; Smith, Derek R

2017-02-23

We examined occupational and industrial differences in lung, gastric, and colorectal cancer risk among Japanese men of working age (25-64 years) using the 2010 Japanese national survey data for occupation and industry-specific death rates. Poisson regression models were used to estimate the age-adjusted incident rate ratios by lung, gastric, and colorectal cancers, with manufacturing used as the referent occupation or industry. Unemployed Japanese men and those in manufacturing had an 8-11-fold increased risk of lung, gastric and colorectal cancer. The highest mortality rates for lung and colorectal cancer by occupation were "administrative and managerial" (by occupation) and "mining" (by industry). For gastric cancer, the highest mortality rate was "agriculture" (by occupation) and "mining" (by industry). By occupation; Japanese men in service occupations, those in administrative and managerial positions, those in agriculture, forestry and fisheries, and those in professional and engineering categories had higher relative mortality risks for lung, gastric, and colorectal cancers. By industry; mining, electricity and gas, fisheries, and agriculture and forestry had the higher mortality risks for those cancers. Unemployed men had higher mortality rates than men in any occupation and industry for all three cancers. Overall, this study suggests that for Japanese men, occupations and industries may be a key social determinant of health.

Occupational health and safety challenges in China--focusing on township-village enterprises.

PubMed

Wang, Xiaorong; Wu, Siying; Song, Qingkun; Tse, Lap-Ah; Yu, Ignatius T S; Wong, Tze-Wai; Griffiths, Sian

2011-01-01

China has experienced dramatic industrialization, urbanization, and economic growth over the last 3 decades. The rapid transformation and dramatic prosperity of industries in rural areas have, in turn, created tremendous challenges for occupational health and safety (OHS). This article was prepared to address occupational health and safety issues in township- and village-owned enterprises (TVEs) from several aspects, including working conditions and workplace hazards, major recognized OHS problems, implications of TVE industries to environmental health, and migrant workers. Among the major recognized OHS problems, pneumoconiosis, chemical poisoning, and workplace accidents, especially in small-scale coal mines, are highlighted. It is suggested that the national polices and regulations that specifically target TVEs are indispensable and a more powerful administrative structure should be established to ensure that the pertinent polices, regulations, and OHS standards can be enforced widely and effectively in practice. Copyright © 2011 Taylor & Francis Group, LLC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zvi H. Meiksin

Two industrial prototype units for through-the-earth wireless communication were constructed and tested. Preparation for a temporary installation in NIOSH's Lake Lynn mine for the through-the-earth and the in-mine system were completed. Progress was made in the programming of the in-mine system to provide data communication. Work has begun to implement a wireless interface between equipment controllers and our in-mine system.

Study of application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry

NASA Technical Reports Server (NTRS)

Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.

1973-01-01

The author has identified the following significant results. The utility of ERTS-1/high altitude aircraft imagery to detect underground mine hazards is strongly suggested. A 1:250,000 scale mined lands map of the Vincennes Quadrangle, Indiana has been prepared. This map is a prototype for a national mined lands inventory and will be distributed to State and Federal offices.

Development of minimum standards for hardwoods used in producing underground coal mine timbers

Treesearch

Floyd G. Timson

1978-01-01

This note presents minimum standards for raw material used in the production of sawn, split, and round timbers for the underground mining industry. The standards are based on a summary of information gathered from many mine-timber producers.

Events affecting gold exploration in Venezuela since 1999

USGS Publications Warehouse

Wilburn, David R.

2014-01-01

The structure of the gold mining industry in Venezuela has changed significantly since 1999 as a result of Government policy changes and industry response to these changes. This report documents the policy decisions that have affected the mining industry, discusses the response of the industry on a site by site basis, and suggests possible effects of these changes on the global economy. For the short term, at least, it appears that these changes have made Venezuela a more difficult place to invest for U.S. and Canadian companies, while investment by Chinese entities has been encouraged.

Electrical injuries in the US mining industry, 2000-2009

PubMed Central

Homce, G.T.; Cawley, J.C.

2015-01-01

The U.S. National Institute for Occupational Safety and Health (NIOSH) Office of Mine Safety and Health Research (OMSHR) conducted a study of mining industry electrical injuries reported to the U.S. Mine Safety and Health Administration (MSHA) for the years 2000 to 2009. The findings of that study are detailed in this paper, and serve to characterize the circumstances surrounding electrical injuries and identify causal factors. The study included three tasks: 1) a direct review of mining industry occupational injury data compiled by MSHA, 2) interpretation of the narrative descriptions available for the injuries (from MSHA data) and 3) a separate examination of fatal electrical injuries. Eight-hundred sixty-five electrical injuries were reported during the 10-year period studied, with 39 of those being fatalities. This makes electrical injuries disproportionately fatal with respect to most other types of injuries in mining. Electrical injury rates were higher in coal mining than noncoal mining and, within the coal sector, rates were higher in underground operations than in surface operations. Of the 865 total cases, electrical and machine maintenance or repair activities were involved in 580 (69%), and electricians and mechanics were injured in 362 cases (42%). Of the 39 fatal electrical injuries, 27 (69%) involved electrical maintenance or repair work, and in 21 of these 27 cases, the failure to de-energize, lock-out and tag the circuit was the cause or a contributing factor. Also, contractor employees had a much greater chance of an electrical injury being fatal than did mine operator employees. The top three root causes for fatal electrical injuries were 1) no or inadequate lock-out and tagging, 2) failure of power system components and 3) contact of overhead electrical power lines by mobile equipment. PMID:26346041

Electrical injuries in the US mining industry, 2000-2009.

PubMed

Homce, G T; Cawley, J C

The U.S. National Institute for Occupational Safety and Health (NIOSH) Office of Mine Safety and Health Research (OMSHR) conducted a study of mining industry electrical injuries reported to the U.S. Mine Safety and Health Administration (MSHA) for the years 2000 to 2009. The findings of that study are detailed in this paper, and serve to characterize the circumstances surrounding electrical injuries and identify causal factors. The study included three tasks: 1) a direct review of mining industry occupational injury data compiled by MSHA, 2) interpretation of the narrative descriptions available for the injuries (from MSHA data) and 3) a separate examination of fatal electrical injuries. Eight-hundred sixty-five electrical injuries were reported during the 10-year period studied, with 39 of those being fatalities. This makes electrical injuries disproportionately fatal with respect to most other types of injuries in mining. Electrical injury rates were higher in coal mining than noncoal mining and, within the coal sector, rates were higher in underground operations than in surface operations. Of the 865 total cases, electrical and machine maintenance or repair activities were involved in 580 (69%), and electricians and mechanics were injured in 362 cases (42%). Of the 39 fatal electrical injuries, 27 (69%) involved electrical maintenance or repair work, and in 21 of these 27 cases, the failure to de-energize, lock-out and tag the circuit was the cause or a contributing factor. Also, contractor employees had a much greater chance of an electrical injury being fatal than did mine operator employees. The top three root causes for fatal electrical injuries were 1) no or inadequate lock-out and tagging, 2) failure of power system components and 3) contact of overhead electrical power lines by mobile equipment.

Assessing post-industrial land cover change at the Pine Point Mine, NWT, Canada using multi-temporal Landsat analysis and landscape metrics.

PubMed

LeClerc, Emma; Wiersma, Yolanda F

2017-04-01

This study investigates land cover change near the abandoned Pine Point Mine in Canada's Northwest Territories. Industrial mineral development transforms local environments, and the effects of such disturbances are often long-lasting, particularly in subarctic, boreal environments where vegetation conversion can take decades. Located in the Boreal Plains Ecozone, the Pine Point Mine was an extensive open pit operation that underwent little reclamation when it shut down in 1988. We apply remote sensing and landscape ecology methods to quantify land cover change in the 20 years following the mine's closure. Using a time series of near-anniversary Landsat images, we performed a supervised classification to differentiate seven land cover classes. We used raster algebra and landscape metrics to track changes in land cover composition and configuration in the 20 years since the mine shut down. We compared our results with a site in Wood Buffalo National Park that was never subjected to extensive anthropogenic disturbance. This space-for-time substitution provided an analog for how the ecosystem in the Pine Point region might have developed in the absence of industrial mineral development. We found that the dense conifer class was dominant in the park and exhibited larger and more contiguous patches than at the mine site. Bare land at the mine site showed little conversion through time. While the combination of raster algebra and landscape metrics allowed us to track broad changes in land cover composition and configuration, improved access to affordable, high-resolution imagery is necessary to effectively monitor land cover dynamics at abandoned mines.

Nonfuel mineral resources in the United States-Mexico border region; a progress report on information available from the Center for Inter-American Mineral Resource Investigations (CIMRI)

USGS Publications Warehouse

Orris, G.J.; Page, N.J.; Staude, J.G.; Bolm, K.S.; Carbonaro, M.M.; Gray, Floyd; Long, K.R.

1993-01-01

The exploitation of minerals has played a significant role in population growth and development of the U.S.Mexico border region. Recent proposed changes in regulations related to mining in the United States and changes in mining and investment regulations in Mexico have led to increased mineral exploration and development in Mexico, especially in the border region. As a preliminary step in the study of the mineral industry of this area, the Center for Inter-American Mineral Resource Investigations (CIMRI) of the U.S. Geological Survey has compiled mine and occurrence data for nonfuel minerals in the border region. Analysis of this information indicates that a wide variety of metallic and industrial mineral commodities are present which can be used in agriculture, infrastructure, environmental improvement, and other industries. Therefore, mining will continue to play a significant role in the economy of this region.

Biomining of metals: how to access and exploit natural resource sustainably.

PubMed

Jerez, Carlos A

2017-09-01

Mining activities have been carried out for thousands of years and nowadays have an enormous worldwide use to obtain important metals of industrial use. These include copper, iron, gold and several others. Although modern mining companies have sustainable mining programs that include tailings management and external verifications, it is recognized that these industrial activities are responsible for a significant damage to the environment. Specially, technologies such as smelting and roasting generate very toxic emissions, including solid particles in the air, very large tailings and contribute to generate acid mine drainage (AMD) that affects humans health and all kinds of living plants, animals and microorganisms. Consequently, due to environmental restrictions, these methods are being replaced in many countries by less contaminating processes. On the other hand, the microbial solubilization of metals by bioleaching or biomining is successfully used in industrial operations, to extract several metals such as copper, gold and uranium. © 2017 The Author. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Rescue complex for coal mines

NASA Astrophysics Data System (ADS)

Yungmeyster, D. A.; Urazbakhtin, R. Yu

2017-10-01

The mining industry was potentially dangerous at all times, even with the use of modern equipment in mines, accidents continue to occur, including catastrophic ones. Accidents in mines are due to the presence of specific features in the conduct of mining operations. These include the inconsistency of mining and geological conditions, the contamination of the mine atmosphere due to the release of gases from minerals, the presence of self-igniting coal strata, which creates the danger of underground fires, gas explosions. The main cause of accidents is the irresponsibility of both the manager and the personnel who violate the safety rules during mining operations.

Temporal and spatial changes of land use and landscape in a coal mining area in Xilingol grassland

NASA Astrophysics Data System (ADS)

Guan, Chunzhu; Zhang, Baolin; Li, Jiannan; Zhao, Junling

2017-01-01

Coal mining, particularly surface mining, inevitably disturbs land. According to Landsat images acquired over Xilingol grassland in 2005, 2009 and 2015, land uses were divided into seven classes, i. e., open stope, stripping area, waste-dump area, mine industrial area, farmland, urban area and the original landscape (grassland), using supervised classification and human-computer interactive interpretation. The overall classification accuracies were 97.72 %, 98.43 % and 96.73 %, respectively; the Kappa coefficients were 0.95, 0.97 and 0.95, respectively. Analysis on LUCC (Land Use and Cover Change) showed that surface coal mining disturbed grassland ecosystem: grassland decreased by 8661.15 hm2 in 2005-2015. The area and proportion of mining operation areas (open stope, stripping area, waste-dump area, mine industrial field) increased, but those of grassland decreased continuously. Transfer matrix of land use changes showed that waste-dump had the largest impacts in mining disturbance, and that effective reclamation of waste-dump areas would mitigate eco-environment destruction, as would be of great significance to protect fragile grassland eco-system. Six landscape index showed that landscape fragmentation increased, and the influences of human activity on landscape was mainly reflected in the expansion of mining area and urban area. Remote sensing monitoring of coal surface mining in grassland would accurately demonstrate the dynamics and trend of LUCC, providing scientific supports for ecological reconstruction in surface mining area.

Russian Experience in the Regulatory Supervision of the Uranium Legacy Sites - 12441

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiselev, M.F.; Romanov, V.V.; Shandala, N.K.

2012-07-01

Management of the uranium legacy is accompanied with environmental impact intensity of which depends on the amount of the waste generated, the extent of that waste localization and environmental spreading. The question is: how hazardous is such impact on the environment and human health? The criterion for safety assurance is adequate regulation of the uranium legacy. Since the establishment of the uranium industry, the well done regulatory system operates in the FMBA of Russia. Such system covers inter alia, the uranium legacy. This system includes the extent laboratory network of independent control and supervision, scientific researches, regulative practices. The currentmore » Russian normative and legal basis of the regulation and its application practice has a number of problems relating to the uranium legacy, connected firstly with the environmental remediation. To improve the regulatory system, the urgent tasks are: -To introduce the existing exposure situation into the national laws and standards in compliance with the ICRP system. - To develop criteria for site remediation and return, by stages, to uncontrolled uses. The similar criteria have been developed within the Russian-Norwegian cooperation for the purpose of remediation of the sites for temporary storage of SNF and RW. - To consider possibilities and methods of optimization for the remediation strategies under development. - To separate the special category - RW resulted from uranium ore mining and dressing. The current Russian RW classification is based on the waste subdivision in terms of the specific activities. Having in mind the new RW-specific law, we receive the opportunity to separate some special category - RW originated from the uranium mining and milling. Introduction of such category can simplify significantly the situation with management of waste of uranium mining and milling processes. Such approach is implemented in many countries and approved by IAEA. The category of 'RW originated from uranium mining and milling' is to be introduced as the legal acts and regulatory documents. The recent ICRP recommendations provide the flexible approaches for solving of such tasks. The FMBA of Russia recognizes the problems of radiation safety assurance related to the legacy of the former USSR in the uranium mining industry. Some part of the regulatory problems assumes to be solved within the EurAsEC inter-state target program 'Reclamation of the territories of the EurAsEC member states affected by the uranium mining and milling facilities'. Using the example of the uranium legacy sites in Kyrgyz and Tajikistan which could result in the tran-boundary disasters and require urgent reclamation, the experience will be gained to be used in other states as well. Harmonization of the national legislations and regulative documents on radiation safety assurance is envisaged. (authors)« less

30 CFR 75.322 - Harmful quantities of noxious gases.

Code of Federal Regulations, 2013 CFR

2013-07-01

... Section 75.322 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.322 Harmful... Governmental Industrial Hygienists in “Threshold Limit Values for Substance in Workroom Air” (1972). Detectors...

30 CFR 75.322 - Harmful quantities of noxious gases.

Code of Federal Regulations, 2011 CFR

2011-07-01

... Section 75.322 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS-UNDERGROUND COAL MINES Ventilation § 75.322 Harmful... Governmental Industrial Hygienists in “Threshold Limit Values for Substance in Workroom Air” (1972). Detectors...

33 CFR 334.20 - Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 33 Navigation and Navigable Waters 3 2013-07-01 2013-07-01 false Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. 334.20 Section 334.20 Navigation and Navigable Waters... REGULATIONS § 334.20 Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. (a) The...

33 CFR 334.20 - Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 33 Navigation and Navigable Waters 3 2011-07-01 2011-07-01 false Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. 334.20 Section 334.20 Navigation and Navigable Waters... REGULATIONS § 334.20 Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. (a) The...

33 CFR 334.20 - Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area.

Code of Federal Regulations, 2014 CFR

2014-07-01

... 33 Navigation and Navigable Waters 3 2014-07-01 2014-07-01 false Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. 334.20 Section 334.20 Navigation and Navigable Waters... REGULATIONS § 334.20 Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. (a) The...

33 CFR 334.20 - Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. 334.20 Section 334.20 Navigation and Navigable Waters... REGULATIONS § 334.20 Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. (a) The...

33 CFR 334.20 - Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area.

Code of Federal Regulations, 2012 CFR

2012-07-01

... 33 Navigation and Navigable Waters 3 2012-07-01 2012-07-01 false Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. 334.20 Section 334.20 Navigation and Navigable Waters... REGULATIONS § 334.20 Gulf of Maine off Cape Small, Maine; naval aircraft practice mining range area. (a) The...

Defining hazard from the mine worker's perspective

PubMed Central

Eiter, B.M.; Kosmoski, C.L.; Connor, B.P.

2016-01-01

In the recent past, the mining industry has witnessed a substantial increase in the numbers of fatalities occurring at metal and nonmetal mine sites, but it is unclear why this is occurring. One possible explanation is that workers struggle with identifying worksite hazards and accurately assessing the associated risk. The purpose of this research was to explore this possibility within the mining industry and to more fully understand stone, sand and gravel (SSG) mine workers' thoughts, understandings and perceptions of worksite hazards and risks. Eight mine workers were interviewed and asked to identify common hazards they come across when doing their jobs and to then discuss their perceptions of the risks associated with those identified hazards. The results of this exploratory study indicate the importance of workers' job-related experience as it applies to hazard identification and risk perception, particularly their knowledge of or familiarity with a task, whether or not they had personal control over that task, and the frequency with which they perform that task. PMID:28042176

Coastal mining

NASA Astrophysics Data System (ADS)

Bell, Peter M.

The Exclusive Economic Zone (EEZ) declared by President Reagan in March 1983 has met with a mixed response from those who would benefit from a guaranteed, 200-nautical-mile (370-km) protected underwater mining zone off the coasts of the United States and its possessions. On the one hand, the U.S. Department of the Interior is looking ahead and has been very successful in safeguarding important natural resources that will be needed in the coming decades. On the other hand, the mining industry is faced with a depressed metals and mining market.A report of the Exclusive Economic Zone Symposium held in November 1983 by the U.S. Geological Survey, the Mineral Management Service, and the Bureau of Mines described the mixed response as: “ … The Department of Interior … raring to go into promotion of deep-seal mining but industrial consortia being very pessimistic about the program, at least for the next 30 or so years.” (Chemical & Engineering News, February 5, 1983).

The interactions of metal concentrations and soil properties on toxic metal accumulation of native plants in vanadium mining area.

PubMed

Aihemaiti, Aikelaimu; Jiang, Jianguo; Li, De'an; Liu, Nuo; Yang, Meng; Meng, Yuan; Zou, Quan

2018-05-29

High demand of Vanadium (V) in high-strength steel and battery manufacturing industry led to extensive V mining activity in China, and caused multi-metal pollution of soil around V mining area. To understand the phytoremediation potentials of native plants grown in V mining area, and the effect of soil properties and soil metal concentrations on toxic metal accumulations of native plants. Setaria viridis, Kochia scoparia and Chenopodium album were sampled from different sites in V mining area, soil properties, soil metal concentrations and metal accumulation amount of investigated plants were measured, bioaccumulation (BAF) and translocation (TF) efficiencies were calculated. Soil pH, cation exchange capacity (CEC) and available phosphorous (P) can significantly affect V and copper (Cu) uptake in the shoots of Setaria viridis while soil metal contents were lower than the permissible limits. Soil pH can significantly affect V accumulations in the roots and shoots of Kochia scoparia grown in slightly V polluted soils. Setaria viridis exhibited TF > 1 for moderately V and slightly chromium (Cr) polluted soils, and BAF>1 for slightly Cu contaminated soils respectively. Kochia scoparia and Chenopodium album showed TF > 1 and BAF>1 for slightly V polluted soils, respectively. Setaria viridis was practical for in situ phytoextractions of moderately V and slightly Cr polluted soils, and phytostabilization of slightly Cu contaminated soils. Kochia scoparia and Chenopodium album could be used as phytoextractor and phytostablizer in slightly V polluted soils in V mining area. Metal uptake of native plants grown in slightly multi-metal contaminated sites in V mining area can be manipulated by altering soil properties. Copyright © 2018. Published by Elsevier Ltd.

Alcohol consumption in the Australian coal mining industry.

PubMed

Tynan, Ross J; Considine, Robyn; Wiggers, John; Lewin, Terry J; James, Carole; Inder, Kerry; Kay-Lambkin, Frances; Baker, Amanda L; Skehan, Jaelea; Perkins, David; Kelly, Brian J

2017-03-01

To investigate patterns of alcohol use within the coal mining industry, and associations with the personal, social, workplace and employment characteristics. 8 mine sites across 3 eastern Australian states were surveyed, selected to encompass key geographic characteristics (accessibility and remoteness) and mine type (open cut and underground). Problematic alcohol use was measured using the Alcohol Use Disorders Identification Test (AUDIT) to determine: (1) overall risky or hazardous drinking behaviour; and (2) frequency of single-occasion drinking (6 or more drinks on 1 occasion). A total of 1457 employees completed the survey, of which 45.7% of male and 17.0% of female participants reported levels of alcohol use within the range considered as risky or hazardous, considerably higher than the national average. Hierarchical linear regression revealed a significant contribution of many individual level factors associated with AUDIT scores: younger age, male, current smoking status; illicit substance use; previous alcohol and other drug use (AOD) problems; and higher psychological distress. Workplace factors associated with alcohol use included working in mining primarily for the high remuneration, and the type of mining, with underground miners reporting higher alcohol use than open-cut miners. Our findings provide support for the need to address alcohol use in the coal mining industry over and above routine on-site testing for alcohol use. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

The Prospects of Accounting at Mining Enterprises as a Factor of Ensuring their Sustainable Development

NASA Astrophysics Data System (ADS)

Tyuleneva, Tatiana

2017-11-01

One of the problems of sustainable development of mining companies is attracting additional investment. To solve it requires access to international capital markets, in this context, enterprises need to prepare financial statements with international requirements based on the data generated by the accounting system. The article considers the basic problems of accounting in the extractive industries due to the nature of the industry, as well as evaluation of the completeness of their solution in the framework of international financial reporting standards. In addition, lists the characteristics of accounting for mining industry, due to the peculiarities of the production process that need to be considered to solve these problems. This sector is extremely important for individual countries and on a global scale.

Industrial chimney monitoring - contemporary methods

NASA Astrophysics Data System (ADS)

Kaszowska, Olga; Gruchlik, Piotr; Mika, Wiesław

2018-04-01

The paper presents knowledge acquired during the monitoring of a flue-gas stack, performed as part of technical and scientific surveillance of mining activity and its impact on industrial objects. The chimney is located in an area impacted by mining activity since the 1970s, from a coal mine which is no longer in existence. In the period of 2013-16, this area was subject to mining carried out by a mining entrepreneur who currently holds a license to excavate hard coal. Periodic measurements of the deflection of the 113-meter chimney are performed using conventional geodetic methods. The GIG used 3 methods to observe the stack: landbased 3D laser scanning, continuous deflection monitoring with a laser sensor, and drone-based visual inspections. The drone offered the possibility to closely inspect the upper sections of the flue-gas stack, which are difficult to see from the ground level.

Contribution to understanding the post-mining landscape - Application of airborn LiDAR and historical maps at the example from Silesian Upland (Poland)

NASA Astrophysics Data System (ADS)

Gawior, D.; Rutkiewicz, P.; Malik, I.; Wistuba, M.

2017-11-01

LiDAR data provide new insights into the historical development of mining industry recorded in the topography and landscape. In the study on the lead ore mining in the 13th-17th century we identified remnants of mining activity in relief that are normally obscured by dense vegetation. The industry in Tarnowice Plateau was based on exploitation of galena from the bedrock. New technologies, including DEM from airborne LiDAR provide show that present landscape and relief of post-mining area under study developed during several, subsequent phases of exploitation when different techniques of exploitation were used and probably different types of ores were exploited. Study conducted on the Tarnowice Plateau proved that combining GIS visualization techniques with historical maps, among all geological maps, is a promising approach in reconstructing development of anthropogenic relief and landscape..

Impact of potential phosphate mining on the hydrology of Osceola National Forest, Florida

USGS Publications Warehouse

Miller, James A.; Hughes, G.H.; Hull, R.W.; Vecchioli, John; Seaber, P.R.

1978-01-01

Potentially exploitable phosphate deposits underlie part of Osceola National Forest, Fla. Hydrologic conditions in the forest are comparable with those in nearby Hamilton County, where phosphate mining and processing have been ongoing since 1965. Given similarity of operations, hydroloigc effects of mining in the forest are predicted. Flow of stream receiving phosphate industry effluent would increase somewhat during mining, but stream quality would not be greatly affected. Local changes in the configuration of the water table and the quality of water in the surficial aquifer will occur. Lowering of the potentiometric surface of the Floridan aquifer because of proposed pumpage would be less than five feet at nearby communities. Flordian aquifer water quality would be appreciably changed only if industrial effluent were discharged into streams which recharge the Flordian through sinkholes. The most significant hydrologic effects would occur at the time of active mining: long-term effects would be less significant. (Woodard-USGS)

[Spatiotemporal patterns and driving forces of land use change in industrial relocation area: a case study of old industrial area in Tiexi of Shenyang, Northeast China].

PubMed

Wang, Mei-Ling; Bing, Long-Fei; Xi, Feng-Ming; Wu, Rui; Geng, Yong

2013-07-01

Based on the QuickBird remote sensing images and with the support of GIS, this paper analyzed the spatiotemporal characteristics of land use change and its driving forces in old industrial area of Tiexi, Shenyang City of Liaoning Province in 2000-2010. During the study period, the industrial and mining warehouse land pattern had the greatest change, evolving from the historical pattern of residential land in the south and of industrial land in the north into residential land as the dominant land use pattern. In the last decade, the residential land area increased by 9%, mainly transferred from the industrial and mining warehouse land located in the north of Jianshe Road, while the industrial and mining warehouse land area decreased by 20%. The land areas for the commercial service and for the administrative and public services were increased by 1.3% and 3.1%, respectively. The land area for construction had a greater change, with an overall change rate being 76.9%. The land use change rate in 2000-2005 was greater than that in 2005-2010. National development strategies and policies, regional development planning, administrative reform, and industrial upgrading were the main driving forces of the land use change in old industrial area of Tiexi.

Manpower for the coal mining industry: an assessment of adequacy through the year 2000. Volume I. Executive summary. Final technical report. [USA; forcasting

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rosenberg, J.I.; Mendis, M.S.; Medville, D.M.

1980-03-01

This report presents a summary of the analytical approach taken and the conclusions reached in an assessment of the supply and demand for manpower in the coal mining industry through the year 2000. A hybrid system dynamics/econometric model of the coal mining industry was developed which incorporates relationships between technological change, labor productivity, production costs, wages, graduation rates, and other key variables in estimating imbalances between labor supply and demand. Study results indicate that while the supply of production workers is expected to be sufficient under most future demand scenarios, periodic shortages of experienced workers, especially in the Northern Greatmore » Plains, can be expected. Other study findings are that the supply of mining engineers will be sufficient under all but the highest coal demand scenario; a shortage of faculty will affect the supply of mining engineers in the near term; and the employment of mining technicians is expected to exhibit the largest increase in any labor category studied. This volume is an Executive Summary which provides a brief description of the study and gives its major conclusions and recommendations. An accompanying volume (Vol. 11) provides a detailed description of the analytical basis for the study, the sources of data used, and a discussion of the conclusions reached.« less

Central florida phosphate industry. Volume II. background and alternatives assessment. Final report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1978-11-01

The Central Florida Phosphate District encompasses an area of approximately 2000 square miles in Polk, Hillsborough, Manatee, Hardee, and DeSoto Counties, Florida. There are currently 17 potential new source mines in the district. This EIS assessed areawide and cumulative effects on the entire area and provides the basis for development of site specific EISs. The final EIS establishes a scenario of phosphate development which was determined to be as compatible as practicable with other desired and intended land uses in Central Florida. Volume II describes the Central Florida Phosphate Industry and the Natural and man-made environments of the study area.more » Several scenarios are presented as decision alternatives and primary and secondary effects are assessed and compared.« less

Lower-Order Mathematical Thinking Skills in Finance, from the Viewpoint of Financial Employees in the Iranian Bank of Industry and Mine

ERIC Educational Resources Information Center

Kumleh, Seyedeh Zahra Aboalhasani; Roodposhti, Fereydon Rahnamay; Shahvarani, Ahmad; Lotfi, Farhad Hosseinzadeh

2017-01-01

In this paper, lower-order mathematical thinking skills within finance were studied from the viewpoint of financial employees in the Iranian Bank of Industry and Mine. To conduct this research, a questionnaire was developed after reviewing lower-order mathematical thinking skills in finance. In accordance with the revised Bloom's taxonomy, the…

Technological Change and Its Labor Impact in Five Energy Industries. Coal Mining/Oil and Gas Extraction/Petroleum Refining/Petroleum Pipeline Transportation/Electric and Gas Utilities.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

This bulletin appraises major technological changes emerging in five American industries (coal mining, oil and gas extraction, petroleum refining, petroleum pipeline transportation, and electric and gas utilities) and discusses the impact of these changes on productivity and occupations over the next five to ten years. Its separate reports on each…

Indonesian coal mining

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2008-11-15

The article examines the opportunities and challenges facing the Indonesian coal mining industry and how the coal producers, government and wider Indonesian society are working to overcome them. 2 figs., 1 tab.

Mechanisms and Effectivity of Sulfate Reducing Bioreactors Using a Chitinous Substrate in Treating Mining Influenced Water

EPA Science Inventory

Mining-influenced water (MIW) is the main environmental challenge associated with the mining industry. Passive MIW remediation can be achieved through microbial activity in sulfate-reducing bioreactors (SRBRs), but their actual removal rates depend on different factors, one of wh...

Raising Environmental Awareness among Miners in Iran

ERIC Educational Resources Information Center

Mozaffari, Ezatollah

2013-01-01

Generation of waste is inevitable but controllable in minerals industry. The aim of this research is to find ways for raising environmental awareness among miners. Miners' attitude towards environmental mining has been investigated. A survey has been done collecting mine managers' point of view coupled with current trend on mine waste management…

Non-standard equipment for construction of vertical shafts

NASA Astrophysics Data System (ADS)

Yagodkin, F. I.; Prokopov, A. Y.; Pleshko, M. S.; Pankratenko, A. N.

2017-10-01

The article deals with the modern problems of construction and reconstruction of vertical shafts of mines, which require innovative technical solutions in the mechanization of mining operations. The examples developed by the authors of the original equipment and technologies, are successfully implemented for the mining industry in Russia.

Silent reminders: geologic wonders of the George Washington and Jefferson National Forests

USGS Publications Warehouse

,; ,

2001-01-01

The iron industry played a vital role in the industrialization of the United States and in the development of the U.S. economy and society. Much of the early history of the iron industry took place in Virginia. The remains of 11 iron furnaces and nearby mines in the George Washington and Jefferson National Forests in Virginia and West Virginia are silent reminders of a time when iron mines and furnaces operated along a belt that extended through the Appalachian Mountains from New York State to Alabama.

30 CFR 875.15 - Reclamation priorities for noncoal program.

Code of Federal Regulations, 2011 CFR

2011-07-01

... from the extreme danger of adverse effects of mineral mining and processing practices; (2) The protection of public health, safety, and general welfare from the adverse effects of mineral mining and... degraded by the adverse effects of mineral mining and processing practices. (c) Enhancement of facilities...

30 CFR 875.15 - Reclamation priorities for noncoal program.

Code of Federal Regulations, 2010 CFR

2010-07-01

... from the extreme danger of adverse effects of mineral mining and processing practices; (2) The protection of public health, safety, and general welfare from the adverse effects of mineral mining and... degraded by the adverse effects of mineral mining and processing practices. (c) Enhancement of facilities...

30 CFR 875.15 - Reclamation priorities for noncoal program.

Code of Federal Regulations, 2012 CFR

2012-07-01

... from the extreme danger of adverse effects of mineral mining and processing practices; (2) The protection of public health, safety, and general welfare from the adverse effects of mineral mining and... degraded by the adverse effects of mineral mining and processing practices. (c) Enhancement of facilities...

30 CFR 875.15 - Reclamation priorities for noncoal program.

Code of Federal Regulations, 2014 CFR

2014-07-01

... from the extreme danger of adverse effects of mineral mining and processing practices; (2) The protection of public health, safety, and general welfare from the adverse effects of mineral mining and... degraded by the adverse effects of mineral mining and processing practices. (c) Enhancement of facilities...

Trace elements in the Fontinalis antipyretica from rivers receiving sewage of lignite and glass sand mining industry.

PubMed

Kosior, Grzegorz; Samecka-Cymerman, Aleksandra; Kolon, Krzysztof; Brudzińska-Kosior, Anna; Bena, Waldemar; Kempers, Alexander J

2015-07-01

Intensive lignite and glass sand mining and industrial processing release waste which may contain elements hazardous to the aquatic ecosystem and constitute a potential risk to human health. Therefore, their levels must be carefully controlled. As a result, we examined the effects of sewage on the aquatic Fontinalis antipyretica moss in the Nysa Łużycka (lignite industry) and the Kwisa Rivers (glass sand industry). The Nysa Łużycka and the Kwisa Rivers appeared to be heavily polluted with As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V and Zn, which were reflected in the extremely high concentration of these elements in F. antipyretica along the studied watercourses. In the Nysa Łużycka, trace element composition in the moss species is affected by lignite industry with accumulation in its tissues of the highest concentrations of Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn, while samples from the Kwisa sites influenced by glass sand industry revealed the highest concentrations of As, V and Fe. The principal component and classification analysis classifies the concentration of elements in the aquatic F. antipyretica moss, thus enabling the differentiation of sources of water pollution in areas affected by mining industry.

PFEM-based modeling of industrial granular flows

NASA Astrophysics Data System (ADS)

Cante, J.; Dávalos, C.; Hernández, J. A.; Oliver, J.; Jonsén, P.; Gustafsson, G.; Häggblad, H.-Å.

2014-05-01

The potential of numerical methods for the solution and optimization of industrial granular flows problems is widely accepted by the industries of this field, the challenge being to promote effectively their industrial practice. In this paper, we attempt to make an exploratory step in this regard by using a numerical model based on continuous mechanics and on the so-called Particle Finite Element Method (PFEM). This goal is achieved by focusing two specific industrial applications in mining industry and pellet manufacturing: silo discharge and calculation of power draw in tumbling mills. Both examples are representative of variations on the granular material mechanical response—varying from a stagnant configuration to a flow condition. The silo discharge is validated using the experimental data, collected on a full-scale flat bottomed cylindrical silo. The simulation is conducted with the aim of characterizing and understanding the correlation between flow patterns and pressures for concentric discharges. In the second example, the potential of PFEM as a numerical tool to track the positions of the particles inside the drum is analyzed. Pressures and wall pressures distribution are also studied. The power draw is also computed and validated against experiments in which the power is plotted in terms of the rotational speed of the drum.

A novel process for preparing fireproofing materials from various industrial wastes.

PubMed

Su, Yi; Wang, Lei; Zhang, Fu-Shen

2018-05-09

In the current study, the possibility of incorporating various industrial wastes into fireproofing materials was investigated. It was found that the newly developed materials showed excellent air sealing and fireproofing performance, with air permeability coefficients 3 to 4 orders of magnitude smaller than traditional fire prevention materials. The influence of different parameters on the air permeability was investigated, and the air sealing mechanisms were clarified through microstructure analysis. In addition, the workability and mechanical properties of the fireproofing materials for practical application in coal mine were studied. The new materials derived from industrial wastes had a compact and monolithic structure, and the excellent air tightness could be attributed to the pozzolanic activity of the industrial wastes and the film-forming property of organic polymers. Among the industrial wastes examined, a special coal fly ash with high pozzolanic activity and little free calcium oxide derived the best product with air permeability coefficient, tensile strength and breaking elongation of 4.17 × 10 -8  m 2 /s, 2.14 MPa and 48.90%, respectively. This study provides an economical, environmentally friendly and promising approach for industrial wastes recycling. Copyright © 2018 Elsevier Ltd. All rights reserved.

Oral bioaccessibility and human exposure to anthropogenic and geogenic mercury in urban, industrial and mining areas.

PubMed

Rodrigues, S M; Coelho, C; Cruz, N; Monteiro, R J R; Henriques, B; Duarte, A C; Römkens, P F A M; Pereira, E

2014-10-15

The objective of this study was to characterize the link between bioaccessibility and fractionation of mercury (Hg) in soils and to provide insight into human exposure to Hg due to inhalation of airborne soil particles and hand-to-mouth ingestion of Hg-bearing soil. Mercury in soils from mining, urban and industrial areas was fractionated in organometallic forms; mobile; semi-mobile; and non-mobile forms as well as HCl-extractable Hg. The in vitro bioaccessibility of Hg was obtained by extracting soils with (1) a simulated human gastric fluid (pH1.5), and (2) a simulated human lung fluid (pH7.4). Total soil Hg concentrations ranged from 0.72 to 1.8 mg kg(-1) (urban areas), 0.28 to 94 mg kg(-1) (industrial area) and 0.92 to 37 mg kg(-1) (mining areas). Both organometallic Hg as well as 0.1M HCl extractable Hg were lower (<0.5% of total Hg) than Hg extracted by gastric fluid (up to 1.8% of total Hg) and lung fluid (up to 12% of total Hg). In addition, Hg extracted by lung fluid was significantly higher in urban and industrial soils (average 5.0-6.6% of total Hg) compared to mining soils. Such differences were related to levels of mobile Hg species in urban and industrial soils compared to mining soils. These results strengthen the need to measure site-specific Hg fractionation when determining Hg bioaccessibility. Results also show that ingestion and/or inhalation of Hg from soil particles can contribute up to 8% of adult total Hg intake when compared to total Hg intake via consumption of contaminated fish and animal products from contaminated areas. Copyright © 2014 Elsevier B.V. All rights reserved.

The Traversella mining site as Piedmont geosite

NASA Astrophysics Data System (ADS)

Costa, Emanuele; Benna, Piera; Antonella Dino, Giovanna; Rossetti, Piergiorgio

2017-04-01

The multidisciplinary research project PROGEOPiemonte, started in 2012, selected nine strategic geothematic areas that have been and are still investigated as representative of the geodiversity of Piedmont region. The dissemination of the knowledge connected to geological history, climate and environmental changes, natural hazards, soil processes, and georesources, not only of the geosites but also of the museum collections, has been and will be spread, evidencing the mining and quarrying activities, and by means of science exhibits and Nature trails. Among the nine selected geosites, there is the Traversella mining area, object of the present research. Traversella mine is located nearly 50 km north of Torino, and it was (together with the neighbor site of Brosso) one of the most important mining location for iron exploitation. The Traversella orebody was exploited from late medieval age up to the middle XX century. It is a representative contact-metasomatic deposit at the border between granodiorite and preexisting host rocks (micaschists, gneisses and marbles of the Sesia-Lanzo Zone), and the mining district represents the only exploited skarn-type mineralization in the Alps. The iron mineral, exploited from different veins and mass (pertaining to the contact aureola) was primarily magnetite, an iron oxide easy to treat in cast iron even employing the technology locally available before 1900. After the beginning of XX century the extraction involved also pyrite and chalcopyrite (iron and copper-iron sulfide), used mainly for the production of sulfuric acid. The mine, after some interruptions and re-openings, was officially closed in the second half of the XX century, due to the high exploitation costs and the competition of the foreign mine deposits interested by iron extraction. The area still presents several signs of mining and dressing activities (underground pits, explorable under severe restrictions, traces of dressing plant, offices, and miners changing room and canteens, etc..); such signs are the tangible trace of a remarkable industrial activity, which can be considered as cultural heritage of historical industrial activities ("industrial archeology"). To enrich such cultural heritage, a museum for minerals and mining tools exposition is still active. Furthermore, to evidence the importance of Traversella mining site, outstanding mineralogical samples coming from Traversella area are displayed in the most famous museum all over the world. The present research aims at emphasize the extraordinary importance of this mining site both from a scientific and a historical point of view, examining the methods and the amount of production during the last three centuries, and highlighting how these activities contributed to the industrial development of the surrounding area and of the whole Piedmont Region. We also want to illustrate the sociological and environmental impact of mining activities at regional level, highlighting the importance of the site from a geoturistic point of view, thanks to of the cultural exploitation of the mining site remains, the developing and upgrade of the already existing mining museum, and the organization of geoturistic itinerary.

Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas

PubMed Central

Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

2015-01-01

Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area. PMID:26580644

Metal recovery by bioleaching of sulfidic mining wastes — Application to a European case study

NASA Astrophysics Data System (ADS)

Guézennec, A. G.; Jacob, J.; Joulian, C.; Dupraz, S.; Menard, Y.; d'Hugues, P.

The non-energy extractive industry (NEEI) of the EU-25 generated a direct turnover of about €40 billion, and provided employment to about 250000 people in 16629 companies in 2004. The use of primary raw materials in the production of other branches of EU industry means they have a central role in guaranteeing industrial and economic sustainability. Nevertheless current demand exceeds production, and so the EU is heavily dependent on minerals and metals imports. In this context of securing access to metals, turning mining wastes into new resources of currently unexploited valuable metals is an important challenge. The mining wastes can contain base and precious metals, but also metalloids and rare earth elements that are nowadays considered as highly critical for the industrial development of the European Union. Nevertheless, the development of alternative routes to conventional processing is still required in order to decrease the cost associated to the treatment of these unconventional resources which are more complex in composition and with lower grades.

30 CFR 874.13 - Reclamation objectives and priorities.

Code of Federal Regulations, 2010 CFR

2010-07-01

... Section 874.13 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE..., safety, and property from extreme danger of adverse effects of coal mining practices, including the... effects of coal mining practices; and (ii) Are adjacent to a site that has been or will be addressed to...

Evaluate fundamental approaches to longwall dust control. Phase III report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Babbitt, C.; Bartlett, P.; Kelly, J.

1984-03-31

The overall objective of the contract is to evaluate the effectiveness of available dust control technology for double-drum shearer longwall sections in a coordinated, systematic program at a few longwall test sections and to make the results available to the entire coal mining industry. This program is investigating nine different dust control techniques. These nine subprograms encompass a broad range of dust control measures ranging from administrative controls to new hardware. They span not only presently employed methods but also those recently adopted in the United States and those proposed for the future. This report documents the Phase III effortmore » on each of the subprograms. For clarity, the report is divided in sections by subprogram as follows: Section 2, Subprogram A - passive barriers/spray air movers for dust control; Section 3, Subprogram B - practical aspects of deep cutting; Section 4, Subprogram C - stage loader dust control; Section 5, Subprogram D - longwall automation technology; Section 6, Subprogram E - longwall application of ventilation curtains; Section 7, Subprogram F - reversed drum rotation; Section 8, Subprogram G - reduction of shield generated dust; Section 9, Subprogram H - air canopies for longwalls; and Section 10, Subprogram I - mining practices. 43 figures, 11 tables.« less

Iowa State Mining and Mineral Resources Research Institute

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1990-08-01

This final report describes the activities of the Iowa State Mining and Mineral Resources Research Institute (ISMMRRI) at Iowa State University for the period July 1, 1989, to June 30, 1990. Activities include research in mining- and mineral-related areas, education and training of scientists and engineers in these fields, administration of the Institute, and cooperative interactions with industry, government agencies, and other research centers. During this period, ISMMRRI has supported research efforts to: (1) Investigate methods of leaching zinc from sphalerite-containing ores. (2) Study the geochemistry and geology of an Archean gold deposit and of a gold-telluride deposit. (3) Enchancemore » how-quality aggregates for use in construction. (4) Pre-clean coal by triboelectric charging in a fluidized-bed. (5) Characterize the crystal/grain alignment during processing of yttrium-barium-copper-perovskite (1-2-3) superconductors. (5) Study the fluid inclusion properties of a fluorite district. (6) Study the impacts of surface mining on community planning. (7) Assess the hydrophobicity of coal and pyrite for beneficiation. (8) Investigate the use of photoacoustic absorption spectroscopy for monitoring unburnt carbon in the exhaust gas from coal-fired boilers. The education and training program continued within the interdepartmental graduate minor in mineral resources includes courses in such areas as mining methods, mineral processing, industrial minerals, extractive metallurgy, coal science and technology, and reclamation of mined land. In addition, ISMMRRI hosted the 3rd International Conference on Processing and Utilization of High-Sulfur Coals in Ames, Iowa. The Institute continues to interact with industry in order to foster increased cooperation between academia and the mining and mineral community.« less

Hazards identified and the need for health risk assessment in the South African mining industry.

PubMed

Utembe, W; Faustman, E M; Matatiele, P; Gulumian, M

2015-12-01

Although mining plays a prominent role in the economy of South Africa, it is associated with many chemical hazards. Exposure to dust from mining can lead to many pathological effects depending on mineralogical composition, size, shape and levels and duration of exposure. Mining and processing of minerals also result in occupational exposure to toxic substances such as platinum, chromium, vanadium, manganese, mercury, cyanide and diesel particulate. South Africa has set occupational exposure limits (OELs) for some hazards, but mine workers are still at a risk. Since the hazard posed by a mineral depends on its physiochemical properties, it is recommended that South Africa should not simply adopt OELs from other countries but rather set her own standards based on local toxicity studies. The limits should take into account the issue of mixtures to which workers could be exposed as well as the health status of the workers. The mining industry is also a source of contamination of the environment, due inter alia to the large areas of tailings dams and dumps left behind. Therefore, there is need to develop guidelines for safe land-uses of contaminated lands after mine closure. © The Author(s) 2015.

Three diameter-limit cuttings in West Virginia hardwoods a 5-year report

Treesearch

Russell J. Hutnik

1958-01-01

Mine timbers are a basic need of West Virginia's giant coal industry. The annual requirement of sawed mine timbers is roughly 250 million board feet. The mines also use a large volume of wood in rough form for props and lagging. Yet, compared to sawlogs and veneer logs, these mine timbers are low-value products. This means that they must be produced at low cost....

Modes and Experience of Green Mine Construction in Yunnan, China: Case Studies

NASA Astrophysics Data System (ADS)

Cheng, Xianfeng; Huang, Qianrui; Yang, Shuran; Xu, Jun; Fan, Youcai; Xu, Gang; Yang, Jiaqing; Yuan, Jia; Qi, Wufu

2017-12-01

Yunnan is one of most important provinces with mineral resources and exploration in China. Meanwhile, Yunnan is Chinese ecological protective screen and try to be Pacesetter of ecological civilization. However, mining industry always disturbs ecological environment seriously. So green mine construction is inevitable and the best choice for Yunnan. In this paper, achievement of green mine construction in Yunnan was summarized. Then the paper takes two mines from Dahongshan and 4 mines from Yunnan Phosphate Chemical Group Co., Ltd (YPC for short) as case studies. Technological innovation in Dahongshan Fe Mine and Dahongshan Cu Mine guarantees their success of green mine construction. Land rehabilitation and harmonious community are highlights of 4 mines from YPC. These modes and experience could be referential to construct green mine.

Intelligent Information Retrieval and Web Mining Architecture Using SOA

ERIC Educational Resources Information Center

El-Bathy, Naser Ibrahim

2010-01-01

The study of this dissertation provides a solution to a very specific problem instance in the area of data mining, data warehousing, and service-oriented architecture in publishing and newspaper industries. The research question focuses on the integration of data mining and data warehousing. The research problem focuses on the development of…

Study of application of ERTS-1 imagery to fracture-related mine safety hazards in the coal mining industry

NASA Technical Reports Server (NTRS)

Wier, C. E. (Principal Investigator); Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.

1972-01-01

The author has identified the following significant results. Numerous fractures are identifiable on the 1:120,000 color infrared photography. Some of these fractures are in the proximity of operating open pit mines and should provide opportunities for field checking and confirmation.

75 FR 70950 - Request for Certification of Compliance-Rural Industrialization Loan and Grant Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-11-19

... buildings, purchase mining equipment, and to create working capital. The office and mine are to be located... enterprise is: 212112 Bituminous Coal Underground Mining. DATES: All interested parties may submit comments... process. Comments should address the two bases for certification and, if possible, provide data to assist...

30 CFR 71.700 - Inhalation hazards; threshold limit values for gases, dust, fumes, mists, and vapors.

Code of Federal Regulations, 2014 CFR

2014-07-01

... gases, dust, fumes, mists, and vapors. 71.700 Section 71.700 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY HEALTH STANDARDS-SURFACE COAL MINES AND... limit values adopted by the American Conference of Governmental Industrial Hygienists in “Threshold...

Student Privacy and Educational Data Mining: Perspectives from Industry

ERIC Educational Resources Information Center

Sabourin, Jennifer; Kosturko, Lucy; FitzGerald, Clare; McQuiggan, Scott

2015-01-01

While the field of educational data mining (EDM) has generated many innovations for improving educational software and student learning, the mining of student data has recently come under a great deal of scrutiny. Many stakeholder groups, including public officials, media outlets, and parents, have voiced concern over the privacy of student data…

Methods and costs of thin-seam mining. Final report, 25 September 1977-24 January 1979. [Thin seam in association with a thick seam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Finch, T.E.; Fidler, E.L.

1981-02-01

This report defines the state of the art (circa 1978) in removing thin coal seams associated with vastly thicker seams found in the surface coal mines of the western United States. New techniques are evaluated and an innovative method and machine is proposed. Western states resource recovery regulations are addressed and representative mining operations are examined. Thin seam recovery is investigated through its effect on (1) overburden removal, (2) conventional seam extraction methods, and (3) innovative techniques. Equations and graphs are used to accommodate the variable stratigraphic positions in the mining sequence on which thin seams occur. Industrial concern andmore » agency regulations provided the impetus for this study of total resource recovery. The results are a compendium of thin seam removal methods and costs. The work explains how the mining industry recovers thin coal seams in western surface mines where extremely thick seams naturally hold the most attention. It explains what new developments imply and where to look for new improvements and their probable adaptability.« less

Boron in tree-ring as an indicator of forest disturbances in the Lower Athabasca Oil Sands region, Northeastern Alberta, Canada

NASA Astrophysics Data System (ADS)

Bégin, Christian; Savard, Martine M.; Marion, Joëlle; Thiffault, Évelyne; Pinno, Brad

2016-04-01

Industrial activities related to oil sands (OS) extraction in northeastern Alberta (Canada) have generated, since 1967, important quantities of NOx and SO2 emissions that can lead to several negative effects on forest ecosystems including the potential for soil acidification. In addition, mining processes, tailing pond treatments and heavy transport (haul roads) in mining areas are considered important sources of air contaminants that have the potential to impair forest health by affecting the nutrient balance and physiology of trees. In this study, we analysed micronutrients (B, Fe, Zn, Na, Cu) and macronutrients (Ca, Mg, Mn, K) in the tree-ring series of jack pine (Pinus banksiana) and spruce (Picea glauca and Picea mariana) trees growing at different distances from the heart of mining operations (two sites for each species). Based on tree-ring records, our aims were to provide a historical perspective on the nutritional status of forest ecosystems and to identify temporal changes in tree-ring chemistry that can be attributed to OS activities. One of the key findings of this research is the direct and immediate response of boron (B) in woody tissues of all studied species to mining operations. During the pre-mining period (prior to 1967) [B] variations in tree-rings of the three species covary with other elements such as Na and Fe and are likely controlled by environmental factors, namely climatic conditions. After 1970, [B] increases and strongly departs from trends of other elements. In jack pine trees (54 km NNE of the centre of industrial operations) the increasing trend is abrupt with mean [B] increasing from 11.7 mg/kg during the pre-industrial period to 14.3 mg/kg during mining period. In spruce trees at the proximal site (14 km NE), [B] increases gradually and nicely reproduces the historical pattern of industrial emissions with mean pre-mining [B] of 29.5 mg/kg increasing to 92.1 mg/kg during the mining period. At the four spruce sites, the increasing rate of B decrease with distance and no specific trend in [B] was found at the distal site (135 km E). Finally, a significant negative correlation was found between [B] and tree growth within the mining area suggesting a potential negative role of anthropogenic emissions on forest productivity. Mining and associated industrial activities in the Alberta OS region are known to have the potential of releasing substantial quantities of B in the environment. Even if B specific emissions remain poorly documented in the area, the high [B] in top organic soil horizons at all sites confirm the atmospheric source for B. Rarely investigated in dendrogeochemical studies, B in the tree-rings, along with other associated nutrients, appears to be an excellent biogeochemical indicator of disturbances in nutritional status of forests in the vicinity of Alberta OS mining activities.

30 CFR 877.13 - Entry and consent to reclaim.

Code of Federal Regulations, 2010 CFR

2010-07-01

... effects of past coal mining if consent from the owner is obtained. (b) If consent is not obtained, then... mining practices; (2) The adverse effects are at a state where, in the interest of the public health..., control, or prevent the adverse effects of past coal mining practices is not known or readily available...

30 CFR 56.6102 - Explosive material storage practices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Explosive material storage practices. 56.6102 Section 56.6102 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Explosives Storage § 56.6102 Explosive material storag...

30 CFR 57.6102 - Explosive material storage practices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Explosive material storage practices. 57.6102 Section 57.6102 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Explosives Storage-Surface and Underground §...

30 CFR 57.6102 - Explosive material storage practices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Explosive material storage practices. 57.6102 Section 57.6102 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Explosives Storage-Surface and Underground §...

30 CFR 56.6102 - Explosive material storage practices.

Code of Federal Regulations, 2013 CFR

2013-07-01

... 30 Mineral Resources 1 2013-07-01 2013-07-01 false Explosive material storage practices. 56.6102 Section 56.6102 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Explosives Storage § 56.6102 Explosive material storag...

30 CFR 57.6102 - Explosive material storage practices.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Explosive material storage practices. 57.6102 Section 57.6102 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-UNDERGROUND METAL AND NONMETAL MINES Explosives Storage-Surface and Underground §...

30 CFR 56.6102 - Explosive material storage practices.

Code of Federal Regulations, 2011 CFR

2011-07-01

... 30 Mineral Resources 1 2011-07-01 2011-07-01 false Explosive material storage practices. 56.6102 Section 56.6102 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND NONMETAL MINE SAFETY AND HEALTH SAFETY AND HEALTH STANDARDS-SURFACE METAL AND NONMETAL MINES Explosives Storage § 56.6102 Explosive material storag...

Industrial Archaeology, Landscapes, and Historical Knowledge of Sustainability

Treesearch

Donald L. Hardesty

2006-01-01

The emergence of industrial life support systems in the last three centuries dramatically changed humanenvironmental relationships. Industrial landscapes are repositories of historical knowledge about this ecological revolution. The key components of industrial landscapes include landforms (for example, waste rock dumps from mines), industrial buildings and structures...

Economic and toxicological aspects of copper industry in Katanga, DR Congo.

PubMed

Kalenga, John Ngoy

2013-02-01

The Katanga province is well known for its copper and cobalt reserves. During the early 2000s a boom of mining projects in Katanga brought again hope for better future to Congolese people. The paper aims to evaluate the impact of recent production recovery on economy and environment. We collected primary and secondary sources on copper industry for economic analysis. We use results of laboratory analysis conducted at the Congolese Office of Control by provincial division of environment for toxicological analysis. The comparison of heavy metal concentration to standards shows that mining industry is the main source of environmental pollution in Katanga. Copper industry generates income for economic growth of the region.

Frac sand in the United States: a geological and industry overview

USGS Publications Warehouse

Benson, Mary Ellen; Wilson, Anna B.; Bleiwas, Donald I.

2015-01-01

More than 40 United States industry operators are involved in the mining, processing, transportation, and distribution of frac sand to a robust market that is fast-growing in the United States and throughout the world. In addition to the abrupt rise in frac sand mining and distribution, a new industry has emerged from the production of alternative proppants, such as coated sand and synthetic beads. Alternative proppants, developed through new technologies, are competing with supplies of natural frac sand. In the long term, the vitality of both industries will be tied to the future of hydraulic fracturing of tight oil and gas reservoirs, which will be driven by the anticipated increases in global energy consumption.

State-of-the-art study of resource characterization and planning for underground coal mining. Final technical report as of June 30, 1980

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walton, D.; Ingham, W.; Kauffman, P.

With the rapid developments taking place in coal mining technology and due to high investment costs, optimization of the structure of underground coal mines is crucial to the success of the mining project. The structure of a mine, once it is developed, cannot be readily changed and has a decisive influence on the productivity, safety, economics, and production capacity of the mine. The Department of Energy desires to ensure that the resource characterization and planning activity for underground coal mining will focus on those areas that offer the most promise of being advanced. Thus, this project was undertaken by Managementmore » Engineers Incorporated to determine the status in all aspects of the resource characterization and planning activities for underground coal mining as presently performed in the industry. The study team conducted a comprehensive computerized literature search and reviewed the results. From this a selection of the particularly relevant sources were annotated and a reference list was prepared, catalogued by resource characterization and mine planning activity. From this data, and discussions with industry representatives, academia, and research groups, private and federal, an assessment and evaluation was made of the state-of-the-art of each element in the resource characterization and mine planning process. The results of this analysis lead to the identifcation of areas requiring research and, specifically, those areas where DOE research efforts may be focused.« less

Chapter L: U.S. Industrial Garnet

USGS Publications Warehouse

Evans, James G.; Moyle, Phillip R.

2006-01-01

The United States presently consumes about 16 percent of global production of industrial garnet for use in abrasive airblasting, abrasive coatings, filtration media, waterjet cutting, and grinding. As of 2005, domestic garnet production has decreased from a high of 74,000 t in 1998, and imports have increased to the extent that as much as 60 percent of the garnet used in the United States in 2003 was imported, mainly from India, China, and Australia; Canada joined the list of suppliers in 2005. The principal type of garnet used is almandite (almandine), because of its specific gravity and hardness; andradite is also extensively used, although it is not as hard or dense as almandite. Most industrial-grade garnet is obtained from gneiss, amphibolite, schist, skarn, and igneous rocks and from alluvium derived from weathering and erosion of these rocks. Garnet mines and occurrences are located in 21 States, but the only presently active (2006) mines are in northern Idaho (garnet placers; one mine), southeastern Montana (garnet placers; one mine), and eastern New York (unweathered bedrock; two mines). In Idaho, garnet is mined from Tertiary and (or) Quaternary sedimentary deposits adjacent to garnetiferous metapelites that are correlated with the Wallace Formation of the Proterozoic Belt Supergroup. In New York, garnet is mined from crystalline rocks of the Adirondack Mountains that are part of the Proterozoic Grenville province, and from the southern Taconic Range that is part of the northern Appalachian Mountains. In Montana, sources of garnet in placers include amphibolite, mica schist, and gneiss of Archean age and younger granite. Two mines that were active in the recent past in southwestern Montana produced garnet from gold dredge tailings and saprolite. In this report, we review the history of garnet mining and production and describe some garnet occurrences in most of the Eastern States along the Appalachian Mountains and in some of the Western States where industrial-grade garnet or its possible occurrence has been reported. Other natural and manmade materials compete with garnet in nearly all of the applications for which garnet can be used; garnet, however, has the advantages that it is reusable, nontoxic, and nonreactive. In addition, garnet produces much less dust than other abrasive materials, and spills are relatively benign and easy to clean up.

Identifying the Source of Gem Diamonds: Requirements for a Certification System

NASA Astrophysics Data System (ADS)

Shigley, J. E.

2002-05-01

Recent civil conflicts in several countries, in which profits from the sales of gem diamonds have supported the rival factions, have forced the jewelry industry to confront the need to certify the geographic sources of gem diamonds. The goals of this program are to prohibit the sale of so-called "conflict diamonds", and to prevent the loss of consumer confidence. Efforts to identify unique characteristics of gem diamonds have been hampered so far by the absence of chemical or physical features that are diagnostic of particular sources, and the lack of a representative collection of diamonds from major producing areas that would be required for a rigorous scientific study. The jewelry industry has therefore adopted plans to track gem diamonds from the mine through the manufacturing process to the consumer. Practical requirements for implementation of such a certification system will be summarized. Any proposed solutions for determining the sources of gem diamonds by some analytical technique, or for following diamonds from the mine, must take into account the annual production of several tens of millions of carats of rough diamonds, which are transformed during manufacturing into several hundreds of millions of polished gemstones (with an average weight of only about 0.03 carat, or 0.006 gram).

Robotic complex for the development of thick steeply-inclined coal seams and ore deposits

NASA Astrophysics Data System (ADS)

Nikitenko, M. S.; Malakhov, Yu V.; Neogi, Biswarup; Chakraborty, Pritam; Banerjee, Dipesu

2017-09-01

Proposal for the formulation of robotic complexes for steeply inclined coal seams as a basis of the supportive-enclosing walking module and power support with a controlled outlet for mining industry has been represented in this literature. In mining industry, the available resource base reserves and mineral deposits are concentrated deep down the earth crust leading towards a complicated geological condition i.e. abrupt ore bedding and steeply inclined strata with the high gas content and fire hazard of thick coal stratum, heading against an unfavorable and sometimes human labor life risk during subversive mining. Prevailing towards the development of effective robotic complexes based on the means of “unmanned technologies” for extraction of minerals from hard-to-reach deposits and make sure the safety of underground staff during sublevel mining technology.

Volvo CE to expand driveline components and introduce new loader concept at bauma

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2007-04-15

This suppliers news report includes a description of Volvo CE's Graphic wheel loader which uses an electric hybrid power sources and is almost emissions free. Simulator training technology is proving its usefulness in establishing higher safety levels in the mining industry. Immersive Technologies Advanced Equipment training simulators are being used to train students at the Academy for Mine Training and Energy Technology in West Virginia. Geo-Explorer core drills manufactured by Multi-Power Products Ltd. of Canada have been purchased by the Pan African Mining Corp. One is to be assigned to the company's coal program where an extensive exploration program ismore » underway in the Sakoa area in Madagascar. A joint venture agreement has been announced between iPackets International and China's Henan YongAn Investment Guarantee Co. and China Coal Information Institute. Under the name GuoAn Mine Safety Communication System, iPacket's wireless communications software and equipment will be deployed in China's mining industry. 3 photos.« less

Testing and modeling the influence of reclamation and control methods for reducing nonpoint mercury emissions associated with industrial open pit gold mines.

PubMed

Miller, Matthieu B; Gustin, Mae S

2013-06-01

Industrial gold mining is a significant source of mercury (Hg) emission to the atmosphere. To investigate ways to reduce these emissions, reclamation and dust and mercury control methods used at open pit gold mining operations in Nevada were studied in a laboratory setting. Using this information along with field data, and building off previous work, total annual Hg emissions were estimated for two active gold mines in northern Nevada. Results showed that capping mining waste materials with a low-Hg substrate can reduce Hg emissions from 50 to nearly 100%. The spraying of typical dust control solutions often results in higher Hg emissions, especially as materials dry after application. The concentrated application of a dithiocarbamate Hg control reagent appears to reduce Hg emissions, but further testing mimicking the actual distribution of this chemical within an active leach solution is needed to make a more definitive assessment.

Study on Evaluation Index System of Green mine construction

NASA Astrophysics Data System (ADS)

Li, xin; Yang, JunJie; Yan, Hongcai; Cao, Hongjun

2017-11-01

Green mine is a new and science comprehensive construction mode of mine, which runs the concept of green development through the whole process of mineral resources development and utilization, promotes the transformation and upgrading of mineral enterprises and achieves the healthy and sustainable development of mining industry. This paper is based on “the basic conditions of national green mine”, combined with the current situation of green mine construction, constructing green mine construction evaluation index system which is divided into five areas, including management, comprehensive utilization of mineral resources. technological innovation. ecological environment and cultural construction.

Contamination of potentially toxic elements in streams and water sediments in the area of abandoned Pb-Zn-Cu deposits (Hrubý Jesenník, Czech Republic)

NASA Astrophysics Data System (ADS)

Lichnovský, J.; Kupka, J.; Štěrbová, V.; Andráš, P.; Midula, P.

2017-10-01

The deposits, located in Nová Ves and Zlaté Hory were well known and important sources of metal ore in Jesenniky region in the past. Especially the one in Nová Ves, which is recently the most important hydrothermal deposit of venous type in the whole area. The mining activity, aimed on lead and zinc minerals was practically permanent here from the middle-age to 1959. On the other hand, the site in Zlaté Hory is the most important ore deposit in Czech Silesia. The non-venous types of polymetallic, copper and gold deposits, evolved in the complex of metamorphic devon rocks are located on south and south-west directions of the area. Long and permanent mining industry caused remarkable changes in the local environment, creating mine heaps and depressions. The probability, that dump material contains potentially toxic substances that could be possibly leaked into surrounded environment is high. This contribution presents the part of complex study results, aimed on evaluating of potential environmental impacts in above mentioned locations. It aims on contamination, caused by potentially toxic heavy metals (Pb, Zn, Cu, Ni, Fe, Mn, Co, Cd, Cr and As) at the sites, exposed to mining activity in the past. The study focus on the contamination of these sites and evaluate them as potential risk for surrounded environment.

Section of Cybernetics in Mining of Mining Committee of Polish Academy of Sciences - Pro Memoria

NASA Astrophysics Data System (ADS)

Wojaczek, Antoni; Miśkiewicz, Kazimierz

2017-09-01

Section of Cybernetics in Mining of Mining Committee of Polish Academy of Science (PAN) has been created by PAN Mining Committee in 1969. It was a section in Mining Committee of PAN, whose operation range included widely understood issues of automation, telecommunication and informatics in mining industry. The main operation method of the Section was to organize the periodic conferences dedicated to issues of control systems in mining. The first conference took place in 1971 in Katowice. Together with new (the current one) term of office of Mining Committee of PAN this Section ceased to exist. The paper presents (pro memoria) over 40 year long conference output of this Section that functioned within the scope of operation of Mining Committee of PAN up to 12th January 2016.

Anomaly Detection Techniques for the Condition Monitoring of Tidal Turbines

DTIC Science & Technology

2014-09-29

particularly beneficial to this industry. This paper explores the use of the CRISP - DM data mining process model for identifying key trends within...within tidal turbines with limited historical data. Using the CRISP - DM data mining methodology (Wirth & Hipp, 2000), key relationships between...indicate a change in the response of the system, indicating the possible onset of a fault. 1.2.1. CRISP - DM The CRISP - DM (Cross-Industry Standard

Mastering Foreign Language Competence of Ecology and Environment Managers for Mining Industry of Kuzbass

NASA Astrophysics Data System (ADS)

Greenwald, Oksana; Islamov, Roman; Sergeychick, Tatyana

2017-11-01

The necessity to solve nature conservation problems of Kuzbass mining industry demands from postgraduate education institutions to train highly qualified specialists in ecology and environment management. As 21st century education is competence-based one, the article clarifies the concept of competence in education, focuses on key competences, namely foreign language competence and its relevance for specialists in ecology and environment management. Foreign language competence is acquired through the course of "Foreign Language" discipline which covers the following aspects: academic reading, academic writing and public speaking. The article also describes the experience of organizing students' individual work taking into account their motivation and specific conditions of the discipline as well. Thus, both the content of the discipline and the approach to organize students' learning contribute to mastering foreign language competence of ecology and environment managers as inherent condition of their professional efficiency for solving ecological problems of mining industry in Kuzbass region.

The Necessity of Public Relations for Sustainable Mining Activities

NASA Astrophysics Data System (ADS)

Lee, Hyunbock; Ji, Sangwoo

2015-04-01

This paper reports research about the necessity of image making for sustainable mine developments in the Republic of Korea. One of the big risks in mining activities is mining area residents opposing mine developments and operations. Analysis of the media reports on disputes between mining companies and residents can determine causes of opposing mine developments, dispute process, and influences of disputes on processes of mining projects. To do this, civil complaints from 2009 to 2012 and 24 media reports since 2000 on opposing mining activities are analyzed. And, to analyze difficulties of mining companies, the survey is conducted to target to mining companies. 57 representatives of mining companies are participated in the survey. The result of analysis cited that the major reasons of anti-mining activities are environmental degradation and reduced agricultural productivity. And specifically because of water pollution (50%), crop damages (33%), and mining dust pollution (21%), communities of mining area are against mine developments and operations. However, 25% of residents have experience of the damage caused by mining activities and the remaining 75% of residents opposing mining activities simply have anxiety about mining pollution. In the past, construction-oriented, environment-unfriendly mining projects had lasted. And while mine reclamation had been postponed in abandoned mines, mining area residents had suffered from mining pollution. So, mining area residents are highly influenced by the prejudice that mining activities are harmful to mining area communities. Current mining projects in South Korea, unlike the past mining activity, focus on minimizing environmental damage and contributing to mining area communities financially. But, in many case of disputes between mining companies and mining area residents, the both cannot reach an agreements because of the negative prejudice. Moreover, some communities categorically refuse any mining activity. On the other hand, in the survey to determine what the greatest difficulties of the current mining activities, 54% of mining companies chose environmental regulations, 26% of mining companies chose conflicts between mine area residents and mining companies. Environmental regulations are may defined as the greatest difficulty of current mining activities. But most of environmental regulation's problems are caused by frictions with residents, because all of South Korean mines are very close to villages. So, the biggest difficulty of mining activities can be defined conflicts between residents and mining companies. Moreover, general people in South Korea including some mining engineers recognize the mining industry as a declined and pollution industry. Without clear understanding of mining activities, any mine developments and policies related to mining activities cannot be made by rational discussions. And, if their recognition is not formed in a rational way, it will be turned to extreme fear or blind hatred. Therefore, to understand mining activities correctly, the effective public relations strategy is necessary such as corporate advertisements or public advertisements.

77 FR 67362 - Application for Final Commitment for a Long-Term Loan or Financial Guarantee in Excess of $100...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-11-09

... transaction: To support the export of mining trucks and bulldozers to Ukraine. Brief non-proprietary description of the anticipated use of the items being exported: To mine iron ore in Ukraine To the extent that... industry. Parties: Principal Supplier: Caterpillar Inc. Obligors: OJSC Ferrexpo Poltava Mining, Ukraine...

Mining and Minerals Technical Advisory Committee on Curriculum Development. Job Clusters, Competencies and Task Analysis.

ERIC Educational Resources Information Center

Northern Montana Coll., Havre. Montana Center for Vocational Education, Research, Curriculum and Personnel Development.

This skills inventory for mining occupations was developed by a technical committee in Montana to assist in the development of model curricula and to address state labor market needs. The committee included employers from the mining industry, members of trade and professional associations, and educators. The validated task list and defined job…

Trade and Industrial Education. Course of Study for Mine Equipment Maintenance.

ERIC Educational Resources Information Center

Simms, James C., Comp.; Tweed, Stephen C., Comp.

Intended as a teaching and learning guide for use with high school students who are interested in the occupation of mine equipment repairman, this beginning course is designed to give students the opportunity to develop the necessary skills required to perform the tasks of a mine equipment repairman; acquire the related information necessary to…

How Agricultural Media Cover Safety Compared with Periodicals in Two Other Hazardous Industries.

PubMed

Marolf, Amanda; Heiberger, Scott; Evans, James; Joseph, Lura

2017-01-26

This analysis featured a uniquely broad look at challenges and potentials for engaging agricultural and other industrial media more effectively in covering safety. It involved a content analysis of selected industry periodicals serving agriculture, mining, and transportation, which are three of the nation's most hazardous industries, in terms of human safety. Use of the social amplification of risk framework (SARF) provided insight on safety coverage. In particular, it tested previous research indicating that media coverage tends to amplify (increase) more than attenuate (decrease) a sense of risk. Analysis involved 18 periodicals (9 agriculture, 7 transportation, and 2 mining) spanning a five-year period from 2008 to 2012. Full-text digital analysis identified terms found in safety articles across all three industries. A manual review of articles revealed the quantity and nature of safety coverage within and among these industries. Results identified 528 safety-related articles published during the period. Transportation and mining periodicals averaged more than twice as many safety articles as the agricultural periodicals. The amount of coverage within the three industries also varied greatly. Findings on the nature of coverage supported previous media research within the SARF. Coverage across all three industries was clearly oriented more to amplifying than to attenuating risk. This study adds to the understanding of variations, commonalities, challenges, and potentials for enhancing safety coverage by media serving these three industries. It also provides direction for engaging industry media more effectively in the public safety mission. The authors recommend seven areas of opportunity for further research. Copyright© by the American Society of Agricultural Engineers.

76 FR 60080 - National Register of Historic Places; Notification of Pending Nominations and Related Actions

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-28

.../National Historic Landmarks Program. COLORADO San Juan County Gold Prince Mine, Mill and Aerial Tramway, (Mining Industry in Colorado, MPS) Address Restricted, Silverton, 11000734 FLORIDA Miami-Dade County...

Characterization of airborne float coal dust emitted during continuous mining, longwall mining and belt transport.

PubMed

Shahan, M R; Seaman, C E; Beck, T W; Colinet, J F; Mischler, S E

2017-09-01

Float coal dust is produced by various mining methods, carried by ventilating air and deposited on the floor, roof and ribs of mine airways. If deposited, float dust is re-entrained during a methane explosion. Without sufficient inert rock dust quantities, this float coal dust can propagate an explosion throughout mining entries. Consequently, controlling float coal dust is of critical interest to mining operations. Rock dusting, which is the adding of inert material to airway surfaces, is the main control technique currently used by the coal mining industry to reduce the float coal dust explosion hazard. To assist the industry in reducing this hazard, the Pittsburgh Mining Research Division of the U.S. National Institute for Occupational Safety and Health initiated a project to investigate methods and technologies to reduce float coal dust in underground coal mines through prevention, capture and suppression prior to deposition. Field characterization studies were performed to determine quantitatively the sources, types and amounts of dust produced during various coal mining processes. The operations chosen for study were a continuous miner section, a longwall section and a coal-handling facility. For each of these operations, the primary dust sources were confirmed to be the continuous mining machine, longwall shearer and conveyor belt transfer points, respectively. Respirable and total airborne float dust samples were collected and analyzed for each operation, and the ratio of total airborne float coal dust to respirable dust was calculated. During the continuous mining process, the ratio of total airborne float coal dust to respirable dust ranged from 10.3 to 13.8. The ratios measured on the longwall face were between 18.5 and 21.5. The total airborne float coal dust to respirable dust ratio observed during belt transport ranged between 7.5 and 21.8.

The business cycle and the incidence of workplace injuries: evidence from the U.S.A.

PubMed

Asfaw, Abay; Pana-Cryan, Regina; Rosa, Roger

2011-02-01

The current study explored the association between the business cycle and the incidence of workplace injuries to identify cyclically sensitive industries and the relative contribution of physical capital and labor utilization within industries. Bureau of Labor Statistics nonfatal injury rates from 1976 through 2007 were examined across five industry sectors with respect to several macroeconomic indicators. Within industries, injury associations with utilization of labor and physical capital over time were tested using time series regression methods. Pro-cyclical associations between business cycle indicators and injury incidence were observed in mining, construction, and manufacturing but not in agriculture or trade. Physical capital utilization was the highest potential contributor to injuries in mining while labor utilization was the highest potential contributor in construction. In manufacturing each effect had a similar association with injuries. The incidence of workplace injury is associated with the business cycle. However, the degree of association and the mechanisms through with the business cycle affects the incidence of workplace injuries was not the same across industries. The results suggest that firms in the construction, manufacturing, and mining industries should take additional precautionary safety measures during cyclical upturns. Potential differences among industries in the mechanisms through which the business cycle affects injury incidence suggest different protective strategies for those industries. For example, in construction, additional efforts might be undertaken to ensure workers are adequately trained and not excessively fatigued, while safety procedures continue to be followed even during boom times. Published by Elsevier Ltd.

Increased Lung Cancer Mortality in Taconite Mining: The Potential for Disease from Elongate Mineral Particle Exposure.

PubMed

Mandel, Jeffrey H; Ramachandran, Gurumurthy; Alexander, Bruce H

2016-02-15

Taconite mining involves potential exposure to non-asbestiform amphibole mineral fiber. More recent studies have demonstrated increased mortality from respiratory cancers and heart disease among workers in the taconite industry. This finding is not consistent with recent exposure assessment findings, nor is the toxicology of this mineral suggestive of neoplastic disease. The understanding of respiratory disease in taconite mining is hampered by the lack of exposure data to asbestiform mineral fibers that occurred in the 1950s and 1960s. Other industries with similar mineral exposure have not demonstrated definitive associations with respiratory cancer, although non-malignant respiratory disease is a consistent finding in epidemiological studies.

Stickler takes the helm at MSHA

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fiscor, S.

2006-12-15

New agency director of the USA's Mine Safety and Health Administration (MSHA), Richard E. Stickler, inherits responsibility for implementing the Mine Improvement and New Emergency Response (MINER) Act amidst one of the US coal industry's most unsafe periods. The article gives an outline of the new leader's career in the coal industry and presents his views on the importance and the implementation of the Act. Stickler's No.1 priority is to do everything he can to protect the health and safety of America's miners. He believes that the goal for everyone in the mining community should be to achieve zero injuriesmore » and zero fatalities, and put an end to occupational illness.« less

Frac Sand Mines Are Preferentially Sited in Unzoned Rural Areas.

PubMed

Locke, Christina

2015-01-01

Shifting markets can cause unexpected, stochastic changes in rural landscapes that may take local communities by surprise. Preferential siting of new industrial facilities in poor areas or in areas with few regulatory restrictions can have implications for environmental sustainability, human health, and social justice. This study focuses on frac sand mining-the mining of high-quality silica sand used in hydraulic fracturing processes for gas and oil extraction. Frac sand mining gained prominence in the 2000s in the upper midwestern United States where nonmetallic mining is regulated primarily by local zoning. I asked whether frac sand mines were more commonly sited in rural townships without formal zoning regulations or planning processes than in those that undertook zoning and planning before the frac sand boom. I also asked if mine prevalence was correlated with socioeconomic differences across townships. After creating a probability surface to map areas most suitable for frac sand mine occurrence, I developed neutral landscape models from which to compare actual mine distributions in zoned and unzoned areas at three different spatial extents. Mines were significantly clustered in unzoned jurisdictions at the statewide level and in 7 of the 8 counties with at least three frac sand mines and some unzoned land. Subsequent regression analyses showed mine prevalence to be uncorrelated with land value, tax rate, or per capita income, but correlated with remoteness and zoning. The predicted mine count in unzoned townships was over two times higher than that in zoned townships. However, the county with the most mines by far was under a county zoning ordinance, perhaps indicating industry preferences for locations with clear, homogenous rules over patchwork regulation. Rural communities can use the case of frac sand mining as motivation to discuss and plan for sudden land-use predicaments, rather than wait to grapple with unfamiliar legal processes during a period of intense conflict.

Assessment and evaluation of noise controls on roof bolting equipment and a method for predicting sound pressure levels in underground coal mining

NASA Astrophysics Data System (ADS)

Matetic, Rudy J.

Over-exposure to noise remains a widespread and serious health hazard in the U.S. mining industries despite 25 years of regulation. Every day, 80% of the nation's miners go to work in an environment where the time weighted average (TWA) noise level exceeds 85 dBA and more than 25% of the miners are exposed to a TWA noise level that exceeds 90 dBA, the permissible exposure limit (PEL). Additionally, MSHA coal noise sample data collected from 2000 to 2002 show that 65% of the equipment whose operators exceeded 100% noise dosage comprise only seven different types of machines; auger miners, bulldozers, continuous miners, front end loaders, roof bolters, shuttle cars (electric), and trucks. In addition, the MSHA data indicate that the roof bolter is third among all the equipment and second among equipment in underground coal whose operators exceed 100% dosage. A research program was implemented to: (1) determine, characterize and to measure sound power levels radiated by a roof bolting machine during differing drilling configurations (thrust, rotational speed, penetration rate, etc.) and utilizing differing types of drilling methods in high compressive strength rock media (>20,000 psi). The research approach characterized the sound power level results from laboratory testing and provided the mining industry with empirical data relative to utilizing differing noise control technologies (drilling configurations and types of drilling methods) in reducing sound power level emissions on a roof bolting machine; (2) distinguish and correlate the empirical data into one, statistically valid, equation, in which, provided the mining industry with a tool to predict overall sound power levels of a roof bolting machine given any type of drilling configuration and drilling method utilized in industry; (3) provided the mining industry with several approaches to predict or determine sound pressure levels in an underground coal mine utilizing laboratory test results from a roof bolting machine and (4) described a method for determining an operators' noise dosage of a roof bolting machine utilizing predicted or determined sound pressure levels.

Trends in Worker Hearing Loss by Industry Sector, 1981–2010

PubMed Central

Masterson, Elizabeth A.; Deddens, James A.; Themann, Christa L.; Bertke, Stephen; Calvert, Geoffrey M.

2015-01-01

Background The purpose of this study was to estimate the incidence and prevalence of hearing loss for noise-exposed U.S. workers by industry sector and 5-year time period, covering 30 years. Methods Audiograms for 1.8 million workers from 1981–2010 were examined. Incidence and prevalence were estimated by industry sector and time period. The adjusted risk of incident hearing loss within each time period and industry sector as compared with a reference time period was also estimated. Results The adjusted risk for incident hearing loss decreased over time when all industry sectors were combined. However, the risk remained high for workers in Healthcare and Social Assistance, and the prevalence was consistently high for Mining and Construction workers. Conclusions While progress has been made in reducing the risk of incident hearing loss within most industry sectors, additional efforts are needed within Mining, Construction and Healthcare and Social Assistance. PMID:25690583

Trends in worker hearing loss by industry sector, 1981-2010.

PubMed

Masterson, Elizabeth A; Deddens, James A; Themann, Christa L; Bertke, Stephen; Calvert, Geoffrey M

2015-04-01

The purpose of this study was to estimate the incidence and prevalence of hearing loss for noise-exposed U.S. workers by industry sector and 5-year time period, covering 30 years. Audiograms for 1.8 million workers from 1981-2010 were examined. Incidence and prevalence were estimated by industry sector and time period. The adjusted risk of incident hearing loss within each time period and industry sector as compared with a reference time period was also estimated. The adjusted risk for incident hearing loss decreased over time when all industry sectors were combined. However, the risk remained high for workers in Healthcare and Social Assistance, and the prevalence was consistently high for Mining and Construction workers. While progress has been made in reducing the risk of incident hearing loss within most industry sectors, additional efforts are needed within Mining, Construction and Healthcare and Social Assistance. © 2015 Wiley Periodicals, Inc.

Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry. [Indiana

NASA Technical Reports Server (NTRS)

Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T.

1973-01-01

The author has identified the following significant results. The Mined Land Inventory map of Pike, Gibson, and Warrick Counties, Indiana, prepared from ERTS-1 imagery, was included in the 1973 Annual Report of the President's Council on Environmental Quality as an example of ERTS applications to mined lands. Increasing numbers of inquiries have been received from coal producing states and coal companies interested in the Indiana Program.

Investigation of mine and industry dumps in the FRG in relation to a possible release of natural radioactive elements.

PubMed

Schmitz, J

1985-10-01

More than 350 dumps of mines and industries in two federal states of the FRG were recorded, measured radiometrically, evaluated, and some of them sampled. Most of the mine dumps belonged to old and smaller residues from lead/zinc and iron ore mining, while the largest depositions contain tailings of modern ore beneficiation or flyash disposal. All mine dumps from uranium exploration in Baden-Württemberg and Bavaria were investigated. The highest doses, up to 100 mSv/a, were found on the piles of the uranium exploration. These depositions, which are supervised and licensed, are followed, in terms of surface dose, by the old uncontrolled mine dumps of silver/cobalt mining with doses up to 20 mSv/a. The numerous porphyry and granite quarries show doses between 1 and 2 mSv/a, as do flyash and slag dumps. The lowest doses were found on the dumps of the hydrothermal Pb/Zn and iron ore deposits, while the slag piles of iron ore processing showed higher thorium values. Assays for Ra-226 and Pb-210 of the materials deposited confirmed the radiometric results. Analyses of seepage waters and gallery waters showed only very few values exceeding the derived drinking water concentrations.

Remote Sensing based multi-temporal observation of North Korea mining activities : A case study of Rakyeon mine

NASA Astrophysics Data System (ADS)

Lim, J. H.; Yu, J.; Koh, S. M.; Lee, G.

2017-12-01

Mining is a major industrial business of North Korea accounting for significant portion of an export for North Korean economy. However, due to its veiled political system, details of mining activities of North Korea is rarely known. This study investigated mining activities of Rakyeon Au-Ag mine, North Korea based on remote sensing based multi-temporal observation. To monitor the mining activities, CORONA data acquired in 1960s and 1970s, SPOT and Landsat data acquired in 1980s and 1990s and KOMPSAT-2 data acquired in 2010s are utilized. The results show that mining activities of Rakyeon mine continuously carried out for the observation period expanding tailing areas of the mine. However, its expanding rate varies between the period related to North Korea's economic and political situations.

Analysis of the current rib support practices and techniques in U.S. coal mines

PubMed Central

Mohamed, Khaled M.; Murphy, Michael M.; Lawson, Heather E.; Klemetti, Ted

2016-01-01

Design of rib support systems in U.S. coal mines is based primarily on local practices and experience. A better understanding of current rib support practices in U.S. coal mines is crucial for developing a sound engineering rib support design tool. The objective of this paper is to analyze the current practices of rib control in U.S. coal mines. Twenty underground coal mines were studied representing various coal basins, coal seams, geology, loading conditions, and rib control strategies. The key findings are: (1) any rib design guideline or tool should take into account external rib support as well as internal bolting; (2) rib bolts on their own cannot contain rib spall, especially in soft ribs subjected to significant load—external rib control devices such as mesh are required in such cases to contain rib sloughing; (3) the majority of the studied mines follow the overburden depth and entry height thresholds recommended by the Program Information Bulletin 11-29 issued by the Mine Safety and Health Administration; (4) potential rib instability occurred when certain geological features prevailed—these include draw slate and/or bone coal near the rib/roof line, claystone partings, and soft coal bench overlain by rock strata; (5) 47% of the studied rib spall was classified as blocky—this could indicate a high potential of rib hazards; and (6) rib injury rates of the studied mines for the last three years emphasize the need for more rib control management for mines operating at overburden depths between 152.4 m and 304.8 m. PMID:27648341

Estimated freshwater withdrawals in Texas, 1990

USGS Publications Warehouse

Lurry, Dee L.

1994-01-01

This report presents 1990 freshwater withdrawal estimates for Texas by source and category. Withdrawal source is either ground water or surface water. Withdrawal categories include: self-supplied irrigation, thermoelectric-power generation, water supply, industrial and mining, and other (domestic, commercial, livestock). Withdrawal data are aggregated by county, major aquifer, and principal river basin. Only the four major categories of irrigation, thermoelectric-power generation, water supply, and industrial and mining are illustrated in this report, although all data are tabulated.

Cloud Computing Boosts Business Intelligence of Telecommunication Industry

NASA Astrophysics Data System (ADS)

Xu, Meng; Gao, Dan; Deng, Chao; Luo, Zhiguo; Sun, Shaoling

Business Intelligence becomes an attracting topic in today's data intensive applications, especially in telecommunication industry. Meanwhile, Cloud Computing providing IT supporting Infrastructure with excellent scalability, large scale storage, and high performance becomes an effective way to implement parallel data processing and data mining algorithms. BC-PDM (Big Cloud based Parallel Data Miner) is a new MapReduce based parallel data mining platform developed by CMRI (China Mobile Research Institute) to fit the urgent requirements of business intelligence in telecommunication industry. In this paper, the architecture, functionality and performance of BC-PDM are presented, together with the experimental evaluation and case studies of its applications. The evaluation result demonstrates both the usability and the cost-effectiveness of Cloud Computing based Business Intelligence system in applications of telecommunication industry.

Documents for SBAR Panel: CERCLA 108(b) Hard Rock Mining Financial Assurance Rule

EPA Pesticide Factsheets

SBAR panel documents for small business advocacy review panel on the financial responsibilities of the hard rock mining industry under Section 108(b) of the Comprehensive Environmental Response, Compensation, and Liability Act

Occupational lung diseases and the mining industry in Mongolia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lkhasuren, O.; Takahashi, K.; Dash-Onolt, L.

Mining production has accounted for around 50% of the gross industrial product in Mongolia since 1998. Dust-induced chronic bronchitis and pneumoconiosis currently account for the largest relative share (67.8%) of occupational diseases in Mongolia, and cases are increasing annually. In 1967-2004, medically diagnosed cases of occupational diseases in Mongolia numbered 7,600. Of these, 5,154 were confirmed cases of dust-induced chronic bronchitis and pneumoconiosis. Lung diseases and other mining-sector health risks pose major challenges for Mongolia. Gold and coal mines, both formal and informal, contribute significantly to economic growth, but the prevalence of occupational lung diseases is high and access tomore » health care is limited. Rapid implementation of an effective national program of silicosis elimination and pneumoconiosis reduction is critical to ensure the health and safety of workers in this important sector of the Mongolian economy.« less

Blood on the coal: the effect of organizational size and differentiation on coal mine accidents.

PubMed

Page, Karen

2009-01-01

Each year, there are at least 100,000,000 occupational accidents and 100,000 occupational deaths in the world. In the United States, one of the safest countries in the world in which to work, there were more than 5,400 workplace fatalities and 5.9 million workplace injuries in 2007. The cost to American industry and taxpayers is estimated to be at least $170 billion per year. Further, as illustrated by accidents such as Three Mile Island and Bhopal, industrial accidents potentially impact a much wider sphere than that of the injured worker and his or her employer. As the repercussions of organizational accidents reverberate through organizations and are felt from human resources to accounting, firms are beginning to incorporate messages of safety in their missions and strategies. As firms organize to achieve safer work environments, they are faced with decisions on how to structure their activities in terms of, among other things, size and differentiation. This paper explores the impact on accident rates of size and differentiation at the corporate and mine levels of mining companies in an effort to create a framework for thinking about organizational accidents from a structural perspective. The results suggest that larger mines are safer than smaller mines, and that mines with less task diversity are safer than mines with greater task diversity. The results also suggest that at the corporate level, task diversity decreases mine accidents. These results may help mining executives and engineers structure their corporate activities and individual mines more effectively to help reduce accidents.

Deformation Monitoring of Waste-Rock-Backfilled Mining Gob for Ground Control

PubMed Central

Zhao, Tongbin; Zhang, Yubao; Zhang, Zhenyu; Li, Zhanhai; Ma, Shuqi

2017-01-01

Backfill mining is an effective option to mitigate ground subsidence, especially for mining under surface infrastructure, such as buildings, dams, rivers and railways. To evaluate its performance, continual long-term field monitoring of the deformation of backfilled gob is important to satisfy strict public scrutiny. Based on industrial Ethernet, a real-time monitoring system was established to monitor the deformation of waste-rock-backfilled gob at −700 m depth in the Tangshan coal mine, Hebei Province, China. The designed deformation sensors, based on a resistance transducer mechanism, were placed vertically between the roof and floor. Stress sensors were installed above square steel plates that were anchored to the floor strata. Meanwhile, data cables were protected by steel tubes in case of damage. The developed system continually harvested field data for three months. The results show that industrial Ethernet technology can be reliably used for long-term data transmission in complicated underground mining conditions. The monitoring reveals that the roof subsidence of the backfilled gob area can be categorized into four phases. The bearing load of the backfill developed gradually and simultaneously with the deformation of the roof strata, and started to be almost invariable when the mining face passed 97 m. PMID:28475168

Deformation Monitoring of Waste-Rock-Backfilled Mining Gob for Ground Control.

PubMed

Zhao, Tongbin; Zhang, Yubao; Zhang, Zhenyu; Li, Zhanhai; Ma, Shuqi

2017-05-05

Backfill mining is an effective option to mitigate ground subsidence, especially for mining under surface infrastructure, such as buildings, dams, rivers and railways. To evaluate its performance, continual long-term field monitoring of the deformation of backfilled gob is important to satisfy strict public scrutiny. Based on industrial Ethernet, a real-time monitoring system was established to monitor the deformation of waste-rock-backfilled gob at -700 m depth in the Tangshan coal mine, Hebei Province, China. The designed deformation sensors, based on a resistance transducer mechanism, were placed vertically between the roof and floor. Stress sensors were installed above square steel plates that were anchored to the floor strata. Meanwhile, data cables were protected by steel tubes in case of damage. The developed system continually harvested field data for three months. The results show that industrial Ethernet technology can be reliably used for long-term data transmission in complicated underground mining conditions. The monitoring reveals that the roof subsidence of the backfilled gob area can be categorized into four phases. The bearing load of the backfill developed gradually and simultaneously with the deformation of the roof strata, and started to be almost invariable when the mining face passed 97 m.

Neural Networks In Mining Sciences - General Overview And Some Representative Examples

NASA Astrophysics Data System (ADS)

Tadeusiewicz, Ryszard

2015-12-01

The many difficult problems that must now be addressed in mining sciences make us search for ever newer and more efficient computer tools that can be used to solve those problems. Among the numerous tools of this type, there are neural networks presented in this article - which, although not yet widely used in mining sciences, are certainly worth consideration. Neural networks are a technique which belongs to so called artificial intelligence, and originates from the attempts to model the structure and functioning of biological nervous systems. Initially constructed and tested exclusively out of scientific curiosity, as computer models of parts of the human brain, neural networks have become a surprisingly effective calculation tool in many areas: in technology, medicine, economics, and even social sciences. Unfortunately, they are relatively rarely used in mining sciences and mining technology. The article is intended to convince the readers that neural networks can be very useful also in mining sciences. It contains information how modern neural networks are built, how they operate and how one can use them. The preliminary discussion presented in this paper can help the reader gain an opinion whether this is a tool with handy properties, useful for him, and what it might come in useful for. Of course, the brief introduction to neural networks contained in this paper will not be enough for the readers who get convinced by the arguments contained here, and want to use neural networks. They will still need a considerable portion of detailed knowledge so that they can begin to independently create and build such networks, and use them in practice. However, an interested reader who decides to try out the capabilities of neural networks will also find here links to references that will allow him to start exploration of neural networks fast, and then work with this handy tool efficiently. This will be easy, because there are currently quite a few ready-made computer programs, easily available, which allow their user to quickly and effortlessly create artificial neural networks, run them, train and use in practice. The key issue is the question how to use these networks in mining sciences. The fact that this is possible and desirable is shown by convincing examples included in the second part of this study. From the very rich literature on the various applications of neural networks, we have selected several works that show how and what neural networks are used in the mining industry, and what has been achieved thanks to their use. The review of applications will continue in the next article, filed already for publication in the journal "Archives of Mining Sciences". Only studying these two articles will provide sufficient knowledge for initial guidance in the area of issues under consideration here.

Ecosystem Services: a Framework for Environmental Management of the Deep Sea

NASA Astrophysics Data System (ADS)

Le, J. T.; Levin, L. A.; Carson, R. T.

2016-02-01

As demand for deep-sea resources rapidly expands in the food, energy, mineral, and pharmaceutical sectors, it has become increasingly clear that a regulatory structure for extracting these resources is not yet in place. There are jurisdictional gaps and a lack of regulatory consistency regarding what aspects of the deep sea need protection and what requirements might help guarantee that protection. Given the mining sector's intent to exploit seafloor massive sulphides, Mn nodules, cobalt crusts, and phosphorites in the coming years, there is an urgent need for deep-ocean environmental management. Here, we propose an ecosystem services-based framework to inform decisions and best practices regarding resource exploitation, and to guide baseline studies, preventative actions, monitoring, and remediation. With policy in early stages of development, an ecosystem services approach has the potential to serve as an overarching framework that takes protection of natural capital provided by the environment into account during the decision-making process. We show how an ecosystem services approach combined with economic tools, such as benefit transfer techniques, should help illuminate issues where there are direct conflicts among different industries, and between industry and conservation. We argue for baseline and monitoring measurements and metrics that inform about deep-sea ecosystem services that would be impaired by mining, and discuss ways to incorporate the value of those losses into decision making, mitigation measures, and ultimately product costs. This proposal is considered relative to current International Seabed Authority recommendations and contractor practices, and new actions are proposed. An ecosystem services-based understanding of how these systems work and their value to society can improve sustainability and stewardship of the deep ocean.

PTBA Coal Briquette Development Project: A status report, March 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Purba, A.C.; Supriyanto, H.; Djamal, T.S.

1995-12-31

Indonesia has a vast coal reserved amounted around 36 Billion Tons (As May 1993), of which more than 98% located in two big islands: Sumatera & Kalimantan. Indonesian Energy Policy, set up in 1976 were shifting the National Energy Mix to encourage the use of other alternative energy for fulfilling the domestic energy demand. Coal, as it was available in enormous reserve become the most suitable alternative fuel. Indonesian coal mining industry was then gaining a big momentum for its resurrection since it was for long had been overlooked. As the result of reconstruction of old mines, expanding the currentmore » mines and the opening of new mines by foreign investor (Contractors) in Kalimantan, since 1986, ten years after the set up of New National Energy Policy or 45 years after peak production level in the past, 2 million tons of coal production was regained. Afterward the coal production of Indonesian coal mine industry are increasing in an exponential rate of growth. With more than 29 million tons of coal produced in 1994, Indonesia will continue to play greater role in the world coal export market in the future. It is projected that by the year of 1998, Indonesia will rank the 3rd as the world coal exporter next to Australia and South African with around 14% of world market share. In this paper, author would only like to report the current status of Indonesian Coal Briquette Industry of which PT Tambang Batubara Bukit Asam (Persero), PTBA, the state owned coal mining company was being appointed to pioneer the establishment of the first coal briquette industry in Indonesia. Process Technology that being compared here in this paper were based on the technical compliance to specification set by government and the techno-economic evaluation. Due to limitations and constrains, all aspects concerning the project will only be discussed in an overview.« less

REMOTE SENSING AND MOUNTAINTOP MINING

EPA Science Inventory

Coal mining is Appalachia has undergone dramatic changes in the past decade. Modem mining practices know as Mountaintop Mining (MTM) and Valley Fills (VF) are at the center of an environmental and legal controversy that has spawned lawsuits and major environmental investigations....

A comparative life cycle assessment of material handling systems for sustainable mining.

PubMed

Erkayaoğlu, M; Demirel, N

2016-06-01

In this comprehensive LCA comparison study, main objectives are to investigate life cycle environmental impacts of off-highway mining trucks and belt conveyors in surface mining. The research methodology essentially entails determination of the functional unit as 20,000 tons/day coal production transported for 5 km distance. After the system boundary was selected as the entire life cycle of material handling systems including pre-manufacturing of steel parts and plastic components, manufacturing, transportation, and utilization data was compiled from equipment manufacturers and the Eco-invent database. Life cycle impact categories for both material-handling systems were identified and the developed model was implemented using SIMAPRO 7.3. Climate change and acidification were selected as major impact categories as they were considered to be major concerns in mining industry. Although manufacturing stage had a significant impact on all of the environmental parameters, utilization stage was the hotspot for the selected impact categories. The results of this study revealed that belt conveyors have a greater environmental burden in climate change impact category when compared to the trucks. On the other hand, trucks have a greater environmental burden in acidification impact category when compared to the belt conveyors. This study implied that technological improvement in fuel combustion and electricity generation is crucial for the improvement of environmental profiles of off-highway trucks and belt conveyors in the mining industry. The main novelty of this study is that it is the first initiative in applying LCA in the Turkish mining industry. Copyright © 2016 Elsevier Ltd. All rights reserved.

Blood biomonitoring of metals in subjects living near abandoned mining and active industrial areas.

PubMed

Madeddu, Roberto; Tolu, Paola; Asara, Yolande; Farace, Cristiano; Forte, Giovanni; Bocca, Beatrice

2013-07-01

A human blood biomonitoring campaign to detect the environmental exposure to metals (Cd, Cu, Cr, Mn, Pb and Zn) in 265 subjects was performed in the South-Western part of Sardinia (an Italian island) that is a particular area with a great history of coal and metal mining (Pb/Zn mainly) activities and large industrial structures (as metallurgy). Subjects living near the industrial plant area had geometric means (GM) of blood Cd (0.79 μg/l), Cu (971 μg/l), Mn (12.2 μg/l), and Pb (55.7 μg/l) significantly higher than controls (Cd, 0.47 μg/l; Cu, 900 μg/l; Mn 9.98 μg/l; Pb, 26.5 μg/l) and than people living nearby the past mining sites. Subjects living next to one dismissed mine were statistically higher in blood Cu (GM, 1,022 μg/l) and Pb (GM, 41.4 μg/l) concentrations than controls. No differences were observed in people living in the different mining sites, and this might be related to the decennial disclosure of mines and the adoption of environmental remediation programmes. Some interindividual variables influenced blood biomonitoring data, as smoke and age for Cd, gender for Cu, age, sex and alcohol for Pb, and age for Zn. Moreover, blood metal levels of the whole population were similar to reference values representative of the Sardinian population and acceptably safe according to currently available health guidelines.

Frac Sand Mines Are Preferentially Sited in Unzoned Rural Areas

PubMed Central

Locke, Christina

2015-01-01

Shifting markets can cause unexpected, stochastic changes in rural landscapes that may take local communities by surprise. Preferential siting of new industrial facilities in poor areas or in areas with few regulatory restrictions can have implications for environmental sustainability, human health, and social justice. This study focuses on frac sand mining—the mining of high-quality silica sand used in hydraulic fracturing processes for gas and oil extraction. Frac sand mining gained prominence in the 2000s in the upper midwestern United States where nonmetallic mining is regulated primarily by local zoning. I asked whether frac sand mines were more commonly sited in rural townships without formal zoning regulations or planning processes than in those that undertook zoning and planning before the frac sand boom. I also asked if mine prevalence was correlated with socioeconomic differences across townships. After creating a probability surface to map areas most suitable for frac sand mine occurrence, I developed neutral landscape models from which to compare actual mine distributions in zoned and unzoned areas at three different spatial extents. Mines were significantly clustered in unzoned jurisdictions at the statewide level and in 7 of the 8 counties with at least three frac sand mines and some unzoned land. Subsequent regression analyses showed mine prevalence to be uncorrelated with land value, tax rate, or per capita income, but correlated with remoteness and zoning. The predicted mine count in unzoned townships was over two times higher than that in zoned townships. However, the county with the most mines by far was under a county zoning ordinance, perhaps indicating industry preferences for locations with clear, homogenous rules over patchwork regulation. Rural communities can use the case of frac sand mining as motivation to discuss and plan for sudden land-use predicaments, rather than wait to grapple with unfamiliar legal processes during a period of intense conflict. PMID:26136238

Wood and bark of Pinus halepensis as archives of heavy metal pollution in the Mediterranean Region.

PubMed

Rodríguez Martin, José Antonio; Gutiérrez, Carmen; Torrijos, Manuel; Nanos, Nikos

2018-04-18

Natural levels of heavy metals (HM) have increased during the industrial era to the point of posing a serious threat to the environment. The use of tree species to record contamination is a well-known practice. The objective of the study was to compare HM levels under different pollution conditions: a) soil pollution due to mining waste; b) atmospheric pollution due to coal-fired power plant emissions. We report significant HM enrichment in Pinus halepensis tissues. Near a burning power plant, Pb content in a tree wood was 2.5-fold higher that in natural areas (no pollution; NP). In mining areas, Cd content was 25-fold higher than NP. The hypothesis that HM contents in tree rings should register pollution is debatable. HM uptake by pines from soil, detoxification mechanisms and resuspended local soil dust is involved in HM contents in wood and bark. Copyright © 2018 Elsevier Ltd. All rights reserved.

Future of lignite resources: a life cycle analysis.

PubMed

Wang, Qingsong; Liu, Wei; Yuan, Xueliang; Zheng, Xiaoning; Zuo, Jian

2016-12-01

Lignite is a low-quality energy source which accounts for 13 % of China's coal reserves. It is imperative to improve the quality of lignite for large-scale utilization. To further explore and analyze the influence of various key processes on the environment and economic costs, a lignite drying and compression technology is evaluated using an integrated approach of life cycle assessment and life cycle costs. Results showed that lignite mining, direct air emissions, and electricity consumption have most significant impacts on the environment. An integrated evaluation of life cycle assessment and life cycle costs showed that the most significant contributor to the environmental impacts and economic costs was the lignite mining process. The impact of transportation and wastewater treatment process on the environment and economic costs was small enough to be ignored. Critical factors were identified for reducing the environmental and economic impacts of lignite drying and compression technology. These findings provide useful inputs for both industrial practice and policy making for exploitation, processing, and utilization of lignite resources.

From awareness to action: Sudbury, mining and occupational disease in a time of change

PubMed Central

Kramer, Desre M.; Holness, D. Linn; Haynes, Emily; McMillan, Keith; Berriault, Colin; Kalenge, Sheila; Lightfoot, Nancy

2017-01-01

BACKGROUND: Miners work in highly hazardous environments, but surprisingly, there are more fatalities from occupational diseases, including cancers, than from fatalities from injuries. Over the last few decades, the mining environment has become safer with fewer injuries and less exposure to the toxins that lead to occupational disease. There have been improvements in working conditions, and a reduction in the number of workers exposed, together with an overall improvement in the health of miners. OBJECTIVES: This study attempted to gain a deeper understanding of the impetus for change to reduce occupational exposures or toxins at the industry level. It focuses on one mining community in Sudbury, Ontario, with a high cancer rate, and its reduction in occupational exposures. It explored the level of awareness of occupational exposures from the perspective of industry and worker representatives in some of the deepest mines in the world. Although awareness may be necessary, it is often not a sufficient impetus for change, and it is this gap between awareness and change that this study explored. It examined the awareness of occupational disease as an impetus to reducing toxic exposures in the mining sector, and explores other forces of change at the industrial and global levels that have led to an impact on occupational exposures in mining. METHODS: From 2014 and 2016, 60 interviews were conducted with individuals who were part of, or witness to the changes in mining in Sudbury. From these, 12 labour and 10 industry interviews and four focus groups were chosen for further analysis to gain a deeper understanding of industry and labour’s views on the changes in mining and the impact on miners’ health from occupational exposures. The results from this subsection of the data is the focus for this paper. RESULTS: The themes that emerged told a story about Sudbury. There is awareness of occupational exposures, but this awareness is dwarfed in comparison to the attention that is given to the tragic fatal injuries from injuries and accidents. The mines are now owned by foreign multinationals with a change from an engaged, albeit paternalistic sense of responsibility for the health of the miners, to a less responsive or sympathetic workplace culture. Modernization has led to the elimination, substitution, or reduction of some of the worst toxins, and hence present-day miners are less exposed to hazards that lead to occupational disease than they were in the past. However, modernization and the drop in the price of nickel has also led to a precipitous reduction in the number of unionized miners, a decline in union power, a decline in the monitoring of present-day exposures, and an increase in non-unionized contract workers. The impact has been that miners have lost their solidarity and power to investigate, monitor or object to present-day exposures. CONCLUSIONS: Although an increase in the awareness of occupational hazards has made a contribution to the reduction in occupational exposures, the improvement in health of miners may be considered more as a “collateral benefit” of the changes in the mining sector. Multiple forces at the industrial and global level have differentially led to an improvement in the working and living environment. However, with the loss of union power, the miners have lost their major advocate for miner health. PMID:29036859

From awareness to action: Sudbury, mining and occupational disease in a time of change.

PubMed

Kramer, Desre M; Holness, D Linn; Haynes, Emily; McMillan, Keith; Berriault, Colin; Kalenge, Sheila; Lightfoot, Nancy

2017-01-01

Miners work in highly hazardous environments, but surprisingly, there are more fatalities from occupational diseases, including cancers, than from fatalities from injuries. Over the last few decades, the mining environment has become safer with fewer injuries and less exposure to the toxins that lead to occupational disease. There have been improvements in working conditions, and a reduction in the number of workers exposed, together with an overall improvement in the health of miners. This study attempted to gain a deeper understanding of the impetus for change to reduce occupational exposures or toxins at the industry level. It focuses on one mining community in Sudbury, Ontario, with a high cancer rate, and its reduction in occupational exposures. It explored the level of awareness of occupational exposures from the perspective of industry and worker representatives in some of the deepest mines in the world. Although awareness may be necessary, it is often not a sufficient impetus for change, and it is this gap between awareness and change that this study explored. It examined the awareness of occupational disease as an impetus to reducing toxic exposures in the mining sector, and explores other forces of change at the industrial and global levels that have led to an impact on occupational exposures in mining. From 2014 and 2016, 60 interviews were conducted with individuals who were part of, or witness to the changes in mining in Sudbury. From these, 12 labour and 10 industry interviews and four focus groups were chosen for further analysis to gain a deeper understanding of industry and labour's views on the changes in mining and the impact on miners' health from occupational exposures. The results from this subsection of the data is the focus for this paper. The themes that emerged told a story about Sudbury. There is awareness of occupational exposures, but this awareness is dwarfed in comparison to the attention that is given to the tragic fatal injuries from injuries and accidents. The mines are now owned by foreign multinationals with a change from an engaged, albeit paternalistic sense of responsibility for the health of the miners, to a less responsive or sympathetic workplace culture. Modernization has led to the elimination, substitution, or reduction of some of the worst toxins, and hence present-day miners are less exposed to hazards that lead to occupational disease than they were in the past. However, modernization and the drop in the price of nickel has also led to a precipitous reduction in the number of unionized miners, a decline in union power, a decline in the monitoring of present-day exposures, and an increase in non-unionized contract workers. The impact has been that miners have lost their solidarity and power to investigate, monitor or object to present-day exposures. Although an increase in the awareness of occupational hazards has made a contribution to the reduction in occupational exposures, the improvement in health of miners may be considered more as a "collateral benefit" of the changes in the mining sector. Multiple forces at the industrial and global level have differentially led to an improvement in the working and living environment. However, with the loss of union power, the miners have lost their major advocate for miner health.

Barite

USGS Publications Warehouse

Miller, M.

2011-01-01

The article discusses the latest developments in the barite or baryte industry, particularly in the U.S., as of June 2011. It claims that the bulk of barites production in the country comes from four mines in Nevada, including the Big Ledge Mine, the Rossi Mine and the Greystone Mine. It cites that barite is mainly used as a weighting agent in natural gas and oil field drilling muds. Barite is also utilized as filler, extender or weighting agent in such products as paints, plastics and rubber.

A case–control study of mesothelioma in Minnesota iron ore (taconite) miners

PubMed Central

Lambert, Christine S; Alexander, Bruce H; Ramachandran, Gurumurthy; MacLehose, Richard F; Nelson, Heather H; Ryan, Andrew D; Mandel, Jeffrey H

2018-01-01

Objectives An excess of mesothelioma has been observed in iron ore miners in Northeastern Minnesota. Mining and processing of taconite iron ore generate exposures that include elongate mineral particles (EMPs) of amphibole and non-amphibole origin. We conducted a nested case–control study of mesothelioma in a cohort of 68 737 iron ore miners (haematite and taconite ore miners) to evaluate the association between mesothelioma, employment and EMP exposures from taconite mining. Methods Mesothelioma cases (N=80) were identified through the Minnesota Cancer Surveillance System (MCSS) and death certificates. Four controls of similar age were selected for each case with 315 controls ultimately eligible for inclusion. Mesothelioma risk was evaluated by estimating rate ratios and 95% CIs with conditional logistic regression in relation to duration of taconite industry employment and cumulative EMP exposure [(EMP/cc)×years], defined by the National Institute for Occupational Safety and Health (NIOSH) 7400 method. Models were adjusted for employment in haematite mining and potential exposure to commercial asbestos products used in the industry. Results All mesothelioma cases were male and 57 of the cases had work experience in the taconite industry. Mesothelioma was associated with the number of years employed in the taconite industry (RR=1.03, 95% CI 1.00 to 1.06) and cumulative EMP exposure (RR=1.10, 95% CI 0.97 to –1.24). No association was observed with employment in haematite mining. Conclusions These results support an association between mesothelioma and employment duration and possibly EMP exposure in taconite mining and processing. The type of EMP was not determined. The potential role of commercial asbestos cannot be entirely ruled out. PMID:26655961

Characterization of Atmospheric Aerosol Particles from a Mining City in Southwest China Using Electron Probe microanalysis

NASA Astrophysics Data System (ADS)

Cheng, X.; Huang, Y.; Lu, H., III; Liu, Z., IV; Wang, N. V.

2015-12-01

Xin Cheng1, Yi Huang1*, Huilin Lu2, Zaidong Liu2, Ningming Wang21 Key Laboratory of Geological Nuclear Technology of Sichuan Province, College of Earth Science, Chengdu University of Technology, Chengdu 610059, China. ; E-mail:chengxin_cdut@163.com 2 College of Earth Science, Chengdu University of Technology, Chengdu 610059, China. ; *Corresponding author: E-mail: huangyi@cdut.cn Panzhihua is a mining city located at Pan-Xi Rift valley, southwest China. It has a long industrial history of vanadium-titanium magnetite mining, iron and steel smelting, and coal-fired power plants. Atomospheric environment has been seriously contaminated with airborne paticles, which is threatening human health.The harmful effects of aerosols are dependent on certain characteristics such as microphysical properties. However, few studsies have been carried out on morphological information contained on single atmospheric particles in this area. In this study, we provide a detailed morphologically and chemically characterization of airborne particles collected at Panzhihua city in October, 2014, using a quantitative single particle analysis based on EPXMA. The results indicate that based on their chemical composition, five major types of particles were identified. Among these, aluminosilicate particles have typical spherical shapes and are produced during the high-temperature combustion; Fe-containing particles contains high level of Mn, and more likely originated from mineralogical and steel industry; Si-containing particles can originate from mineralogical source; V-Ti-Mn-containing particles are also produced by steel industry; Ca-containing particles,these particles are CaCO3, mainly from the mining of limestone mine. The results help us on tracing and partitioning different sources of atomospheric particles in the industrial area. Fig.1 Fe-rich shperical particles

A case-control study of mesothelioma in Minnesota iron ore (taconite) miners.

PubMed

Lambert, Christine S; Alexander, Bruce H; Ramachandran, Gurumurthy; MacLehose, Richard F; Nelson, Heather H; Ryan, Andrew D; Mandel, Jeffrey H

2016-02-01

An excess of mesothelioma has been observed in iron ore miners in Northeastern Minnesota. Mining and processing of taconite iron ore generate exposures that include elongate mineral particles (EMPs) of amphibole and non-amphibole origin. We conducted a nested case-control study of mesothelioma in a cohort of 68,737 iron ore miners (haematite and taconite ore miners) to evaluate the association between mesothelioma, employment and EMP exposures from taconite mining. Mesothelioma cases (N=80) were identified through the Minnesota Cancer Surveillance System (MCSS) and death certificates. Four controls of similar age were selected for each case with 315 controls ultimately eligible for inclusion. Mesothelioma risk was evaluated by estimating rate ratios and 95% CIs with conditional logistic regression in relation to duration of taconite industry employment and cumulative EMP exposure [(EMP/cc)×years], defined by the National Institute for Occupational Safety and Health (NIOSH) 7400 method. Models were adjusted for employment in haematite mining and potential exposure to commercial asbestos products used in the industry. All mesothelioma cases were male and 57 of the cases had work experience in the taconite industry. Mesothelioma was associated with the number of years employed in the taconite industry (RR=1.03, 95% CI 1.00 to 1.06) and cumulative EMP exposure (RR=1.10, 95% CI 0.97 to -1.24). No association was observed with employment in haematite mining. These results support an association between mesothelioma and employment duration and possibly EMP exposure in taconite mining and processing. The type of EMP was not determined. The potential role of commercial asbestos cannot be entirely ruled out. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

The Safety Attitudes of Senior Managers in the Chinese Coal Industry

PubMed Central

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-01-01

Introduction: Senior managers’ attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers′ attitudes towards safety in the Chinese coal industry. Method: We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions: Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers′ safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers′ unions not playing their role effectively. Practical Applications: We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry. PMID:27869654

The Safety Attitudes of Senior Managers in the Chinese Coal Industry.

PubMed

Zhang, Jiangshi; Chen, Na; Fu, Gui; Yan, Mingwei; Kim, Young-Chan

2016-11-17

Introduction: Senior managers' attitudes towards safety are very important regarding the safety practices in an organization. The study is to describe the current situation of senior managers' attitudes towards safety in the Chinese coal industry. Method : We evaluated the changing trends as well as the reasons for these changes in the Chinese coal industry in 2009 and in 2014 with 168 senior manager samples from large Chinese state-owned coal enterprises. Evaluations of 15 safety concepts were performed by means of a questionnaire. Results and Conclusions : Results indicate that, in 2014, three concepts were at a very high level (mean > 4.5), and six were at a relatively high level (4.5 > mean > 4.0). Analyses of changing trends revealed that nine concepts improved significantly, while four greatly declined in 2014 compared to those in 2009. The data reported here suggest that the reasons for the significant improvement with respect to the nine concepts include the improvement in social and legal environments, the improvement of the culture of social safety, workers' safety demands being met, and scientific and technical advances in the coal industry. The decline of the four concepts seemed to be caused by a poor awareness of managers in the coal industry that safety creates economic benefits, insufficient information on safety, inadequate attention to the development of a safety culture and safety management methods, and safety organizations and workers' unions not playing their role effectively. Practical Applications : We therefore recommend strengthening the evidence that safety creates economic benefits, providing incentives for employees to encourage their participation in safety management, and paying more attention to the prevention of accidents in coal mines via safety organizations and unions. These results can provide guidelines for workers, industrialists, and government regarding occupational safety in the whole coal industry.

Economic and Technological Role of Kuzbass Industry in the Implementation of National Energy Strategy of Russian Federation

NASA Astrophysics Data System (ADS)

Zhironkin, S. A.; Khoreshok, A. A.; Tyulenev, M. A.; Barysheva, G. A.; Hellmer, M. C.

2016-08-01

This article describes the problems and prospects of development of coal mining in Kuzbass - the center of coal production in Siberia and Russia, in the framework of the major initiatives of the National Energy Strategy for the period until 2035. The structural character of the regional coal industry problems, caused by decline in investment activity, high level of fixed assets depreciation, slow development of deep coal processing and technological reduction of coal mining is shown.

Issues of Exploitation of Induction Motors in the Course of Underground Mining Operations

NASA Astrophysics Data System (ADS)

Gumula, Stanisław; Hudy, Wiktor; Piaskowska-Silarska, Malgorzata; Pytel, Krzysztof

2017-09-01

Mining industry is one of the most important customers of electric motors. The most commonly used in the contemporary mining industry is alternating current machines used for processing electrical energy into mechanical energy. The operating problems and the influence of qualitative interference acting on the inputs of individual regulators to field-oriented system in the course of underground mining operations has been presented in the publication. The object of controlling the speed is a slip-ring induction motor. Settings of regulators were calculated using an evolutionary algorithm. Examination of system dynamics was performed by a computer with the use of the MATLAB / Simulink software. According to analyzes, large distortion of input signals of regulators adversely affects the rotational speed that pursued by the control system, which may cause a large vibration of the whole system and, consequently, its much faster destruction. Designed system is characterized by a significantly better resistance to interference. The system is stable with the properly selected settings of regulators, which is particularly important during the operation of machinery used in underground mining.

A Delta-V map of the known Main Belt Asteroids

NASA Astrophysics Data System (ADS)

Taylor, Anthony; McDowell, Jonathan C.; Elvis, Martin

2018-05-01

With the lowered costs of rocket technology and the commercialization of the space industry, asteroid mining is becoming both feasible and potentially profitable. Although the first targets for mining will be the most accessible near Earth objects (NEOs), the Main Belt contains 106 times more material by mass. The large scale expansion of this new asteroid mining industry is contingent on being able to rendezvous with Main Belt asteroids (MBAs), and so on the velocity change required of mining spacecraft (delta-v). This paper develops two different flight burn schemes, both starting from Low Earth Orbit (LEO) and ending with a successful MBA rendezvous. These methods are then applied to the ∼700,000 asteroids in the Minor Planet Center (MPC) database with well-determined orbits to find low delta-v mining targets among the MBAs. There are 3986 potential MBA targets with a delta-v < 8 km s-1 , but the distribution is steep and reduces to just 4 with delta-v < 7 km s-1. The two burn methods are compared and the orbital parameters of low delta-v MBAs are explored.

The Nonfuel Minerals Industry: Regulatory Impacts.

ERIC Educational Resources Information Center

Hershaft, Alex; Lacy, William

1980-01-01

Presented is an assessment of the effects of environmental and health and safety regulations on costs, competitiveness, and viability relative to the nation's metal mining and processing industry. (RE)

Injury experience in coal mining, 1992

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reich, R.B.; Hugler, E.C.

1994-05-01

This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1992. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries,more » summary reference tabulations are included at the end of both the operator and the contractor sections of this report.« less

Injury experience in coal mining, 1990

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

1991-01-01

This Mine Safety and Health Administration (MSHA) informational report reviews in detail the occupational injury and illness experience of coal mining in the United States for 1990. Data reported by operators of mining establishments concerning work injuries are summarized by work location, accident classification, part of body injured, nature of injury, occupation, and anthracite or bituminous coal. Related information on employment, worktime, and operating activity also is presented. Data reported by independent contractors performing certain work at mining locations are depicted separately in this report. For ease of comparison between coal mining and the metal and nonmetal mineral mining industries,more » summary reference tabulations are included at the end of both the operator and the contractor sections of this report.« less

Mine Clearance Industry: Background, Geography, Funding, Analysis and Future Projections

DTIC Science & Technology

2007-12-01

the targeting of food supplies to such an extreme (through widespread mining of agricultural areas and destruction of irrigation systems) that...UNOPS), Food and Agriculture Organization (FAO), Office for the Coordination of Humanitarian Affairs (OCHA), Office of the Special Adviser to the...U.N. High Commissioner for Refugees (UNHCR), World Food Program (WFP), World Health Organization (WHO), World Bank) on Mine Action before being

African Mining, Gender and Local Employment

NASA Astrophysics Data System (ADS)

Tolonen, A.; Kotsadam, A.

2014-12-01

Access to employment improves women's lives and is listed among the top five priorities for promoting gender equality in the 2012 World Development Report. This paper addresses this issue by exploring women's labor market opportunities in Africa within one very important and growing sector: extractive industries. Africa's opportunities are being transformed by new discoveries of natural resources and their rising prices, and the mining sector is the main recipient of foreign direct investment in Sub-Saharan Africa. Whether the discovery of natural resources is a blessing or a curse to a country's citizens is a contentious issue, and natural resource dependence has been linked to negative outcomes at the national level such as environmental degradation, conflict, elite capture of rents and low female labor force participation. Natural resource extraction has been argued to be a hindrance to women's labor market participation by increasing reservation wages and by decreasing market demand for female labor. We perform the first cross-national study testing these hypotheses with micro-data. To do this we combine survey data on 500,000 women in Sub-Saharan Africa with geo-coded data on 900 large-scale mines (see Figure 1). We treat mine openings and mine closings as natural experiments to explore local labor market changes. Industrial mines generate local structural shifts. Subsistence farming becomes less important for both men and women. However, men shift to skilled manual labor, and women shift to service sector jobs. This contradicts the hypothesis that natural resource extraction is detrimental to women, by not providing them with new job opportunities. However, in support of the hypothesis, women decrease their labor market participation more than men do. A back-of-the-envelope calculation estimates that 90,000 women across Africa benefit from service sector jobs as a direct result of industrial mining in their communities, but 280,000 women leave the labor force. Further evidence using exogenous changes in world prices of minerals show that effects are stronger in boom times, but that the labor market effects are temporary and disappear with mine closing. The effects are highly spatially concentrated, and individuals living 50km away from a mine are not affected by it.

Asia Lakes

Atmospheric Science Data Center

2013-04-16

... of oil were expanded in 2000. Important industries include coal mining and the production of food and wool. The region is also of ... interest; a large mammoth skeleton excavated from one of the coal mines near Manzhouli is on display at the Inner Mongolia Museum in Huhhot, ...

15 CFR 970.100 - Purpose.

Code of Federal Regulations, 2012 CFR

2012-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES General § 970.100 Purpose. (a) General... recognition that the deep seabed mining industry is still evolving and that more information must be developed...

15 CFR 970.100 - Purpose.

Code of Federal Regulations, 2013 CFR

2013-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES General § 970.100 Purpose. (a) General... recognition that the deep seabed mining industry is still evolving and that more information must be developed...

15 CFR 970.100 - Purpose.

Code of Federal Regulations, 2014 CFR

2014-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES General § 970.100 Purpose. (a) General... recognition that the deep seabed mining industry is still evolving and that more information must be developed...

ASPPRC

Science.gov Websites

; Current Students: Go inside.mines Home Operations Summary Corporate Sponsors Sponsor Access Staff Students fifty Industry/University Cooperative Research Centers. Thanks to corporate supporters from all over the corporate sponsors. © 2018 Colorado School of Mines | | Equal Opportunity | Privacy Policy | Directories

OVERVIEW OF MINE WASTE TECHNOLOGY PROGRAM

EPA Science Inventory

The Mine Waste Technology Program (MWTP) is an interagency agreement with the DOE and has partnerships with Universities, Forest Service, BLM, Industry and states. The mission of the MWTP is to provide engineering solutions to national environmental issues resulting from the past...

15 CFR 970.100 - Purpose.

Code of Federal Regulations, 2010 CFR

2010-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES General § 970.100 Purpose. (a) General... recognition that the deep seabed mining industry is still evolving and that more information must be developed...

15 CFR 970.100 - Purpose.

Code of Federal Regulations, 2011 CFR

2011-01-01

... AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE GENERAL REGULATIONS OF THE ENVIRONMENTAL DATA SERVICE DEEP SEABED MINING REGULATIONS FOR EXPLORATION LICENSES General § 970.100 Purpose. (a) General... recognition that the deep seabed mining industry is still evolving and that more information must be developed...

Safety rules and regulations on mine sites - the problem and a solution.

PubMed

Laurence, David

2005-01-01

Many accidents and incidents on mine sites have a causal factor in the rules and regulations that supposedly are in place to prevent the incident from occurring. The causes involve a lack of awareness or understanding, ignorance, or deliberate violations. The issue of mine rules, procedures, and regulations is a central focus of this paper, highlighted by this recent comment - "very few people have accidents for which there is no procedure in place..." An attitudinal survey was conducted at 33 mines throughout NSW, Queensland and international mine sites involving almost 500 mineworkers. The survey was in the form of a self-completing questionnaire, consisting of approximately 65 questions. It aimed to seek the opinions of the mining workforce on safety rules and regulations generally, as well as how they apply to their specific jobs on a mine site. The research also aimed to investigate: (a) the level of awareness and understanding of mine rules and procedures such as manager's rules and safe work procedures (SWPs); (b) the level of awareness and understanding of mine safety regulations and legislation; (c) the extent of communication of and commitment to rules and regulations; (d) the extent of compliance with rules and regulations; and (e) attitudes regarding errors, risk-taking, and accidents and their interaction with rules and regulations. The sample consisted of a random selection of underground and open pit mines, extracting coal, metals, or industrial minerals. The insights provided by the mineworkers enabled a set of principles to be developed to guide mine management and regulators in the development of more effective rules and regulations. CONCLUSIONS AND IMPACT ON THE MINING INDUSTRY: (a) Management and regulators should not continue to produce more and more rules and regulations to cover every aspect of mining. (b) Detailed prescriptive regulations, detailed safe work procedures, and voluminous safety management plans will not "connect" with a miner. (c) Achieving more effective rules and regulations is not the only answer to a safer workplace.

40 CFR 434.82 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2013 CFR

2013-07-01

... application of the best practicable control technology currently available (BPT). 434.82 Section 434.82... practicable control technology currently available (BPT). Except as provided in 40 CFR 125.30 through 125.32, the following effluent limitations apply to mine drainage from applicable areas of western coal mining...

40 CFR 434.82 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2014 CFR

2014-07-01

... application of the best practicable control technology currently available (BPT). 434.82 Section 434.82... practicable control technology currently available (BPT). Except as provided in 40 CFR 125.30 through 125.32, the following effluent limitations apply to mine drainage from applicable areas of western coal mining...

40 CFR 434.82 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2012 CFR

2012-07-01

... application of the best practicable control technology currently available (BPT). 434.82 Section 434.82... practicable control technology currently available (BPT). Except as provided in 40 CFR 125.30 through 125.32, the following effluent limitations apply to mine drainage from applicable areas of western coal mining...

Introduction to Space Resource Mining

NASA Technical Reports Server (NTRS)

Mueller, Robert P.

2013-01-01

There are vast amounts of resources in the solar system that will be useful to humans in space and possibly on Earth. None of these resources can be exploited without the first necessary step of extra-terrestrial mining. The necessary technologies for tele-robotic and autonomous mining have not matured sufficiently yet. The current state of technology was assessed for terrestrial and extraterrestrial mining and a taxonomy of robotic space mining mechanisms was presented which was based on current existing prototypes. Terrestrial and extra-terrestrial mining methods and technologies are on the cusp of massive changes towards automation and autonomy for economic and safety reasons. It is highly likely that these industries will benefit from mutual cooperation and technology transfer.

Air quality status of an open pit mining area in India.

PubMed

Chaulya, S K

2005-06-01

This investigation presents the assessment of ambient air quality carried out at an open pit coal mining area in Orissa state of India. The 24-h average concentrations of suspended particulate matter (SPM), respirable particulate matter (RPM, particles of less than 10 microm aerodynamic diameter), sulphur dioxide (SO2) and oxides of nitrogen (NO(x)) were determined at regular interval throughout one year at 13 monitoring stations in residential area and four stations in mining/industrial area. During the study period, the 24-h and annual average SPM and RPM concentrations exceeded the respective standards set in the Indian ambient air quality standard (NAAQS) protocol in most of the residential and industrial areas. However, the 24-h and annual average concentrations of SO2 and NO(x) were well within the prescribed limit of the NAAQS in both residential and industrial areas. A management strategy is formulated for effective control of particulate matter at source and other mitigative measures are recommended including implementation of green belts around the sensitive areas.

Performance evaluation of functioning of natural-industrial system of mining-processing complex with help of analytical and mathematical models

NASA Astrophysics Data System (ADS)

Bosikov, I. I.; Klyuev, R. V.; Revazov, V. Ch; Pilieva, D. E.

2018-03-01

The article describes research and analysis of hazardous processes occurring in the natural-industrial system and effectiveness assessment of its functioning using mathematical models. Studies of the functioning regularities of the natural and industrial system are becoming increasingly relevant in connection with the formulation of the task of modernizing production and the economy of Russia as a whole. In connection with a significant amount of poorly structured data, it is complicated by regulations for the effective functioning of production processes, social and natural complexes, under which a sustainable development of the natural-industrial system of the mining and processing complex would be ensured. Therefore, the scientific and applied problems, the solution of which allows one to formalize the hidden structural functioning patterns of the natural-industrial system and to make managerial decisions of organizational and technological nature to improve the efficiency of the system, are very relevant.

How Canada's Asbestos Industry Was Defeated in Quebec.

PubMed

Ruff, Kathleen

2017-02-01

Less than a decade ago, the Quebec asbestos industry enjoyed support from all the political parties in the Canadian House of Commons and the Quebec National Assembly, as well as from business and union organizations. Two lobby organizations (Chrysotile Institute and International Chrysotile Association) had significant global impact in promoting asbestos use and defeating asbestos ban efforts in developing countries. Quebec's two asbestos mines planned to expand operations and make Quebec the second biggest global asbestos exporter. With the aid of lobbyists, public relations consultants, and government financing, the asbestos industry came close to succeeding. The article examines how a campaign of international solidarity, involving scientific experts, asbestos victims, and health activists in Quebec, Canada, and overseas, succeeded in closing the two mines and defeating the political and social power that the Quebec asbestos industry had wielded for a century. This victory ended Canada's destructive role as global propagandist for the asbestos industry.

Mercury contamination in chile: a chronicle of a problem foretold.

PubMed

Barrios-Guerra, Carlos A

2004-01-01

This review analyzes the effects of environmental mercury contamination in Chile. This contamination generates one of the most important environmental conflicts in the country in that it affects air, ground, and water (rivers and oceans), which are fundamental in maintaining natural biotic equilibrium and at the same time important for the nation's economy. Chile possesses extraordinarily wealthy mining resources between Regions I and IV that have developed into an extraction industry essential for the economy of the country. However, waste discharges from this production have created an environmental problem in that the majority of the mines are located in the Andes mountain range, or areas close by, and the water used in the extraction process is deposited into the rivers, significantly increasing the amount of chemical contamination. Therefore, the cities and downstream waters used in agriculture suffer the negative consequences of a natural resource that is becoming more and more scarce. In addition, minerals released from mills into the atmosphere are deposited onto the soil, drastically affecting the biological resources of these areas. One of these affected areas is the Metropolitan region, where one of the highest contamination levels of mercury in the country was found in one of its affluents due to industrial and domestic waste discharge. In a country that is only 200 km in width, the gathering of all these contaminants in the rivers results in a rapid flow to the ocean, thereby contaminating coastal waters and the biota. In general, this contamination has been detected in semiclosed bodies of water (bays). Between Regions VII and IX, the principal sources of mercury contamination are related to cellulose industrial sites (Regions VII and VIII) and, until the 1980s, the bleach-soda industry. The most important industrial and fishing activity is also found in this area. In San Vicente Bay, waste discharges released into the ocean include sewage, industrial residues, residues from fishing and mining industries, hydrocarbons, petrochemical derivatives, oils, and detergents. This combination of chemical assault makes the San Vicente Bay the most contaminated in the country and the area where the majority of mercury contamination studies have been carried out. Between Regions X and XII, mercury contamination is reduced due to decreased release of domestic residues, especially batteries and sanitary waste. Beginning with the decade of the 1990s, Chile made a great effort to decrease contamination through governmental organizations (CONAMA, SERNAGEOMIN, DGA, ECOMIN, SONAMI), nongovernmental organizations (NGOs), universities, government mining industries (CODELCO, ENAMI), and private mining industries (El Indio, La Escondida, La Candelaria, Fachinal, etc). These reduction efforts within the last 10 years exceed $900 million, and in the private mining sector alone more than 1,100 monitoring stations have been installed and more than 100,000 environmental measurements have been carried out each year. Furthermore, an important educational program on the use of mercury has been implemented in the small mining area to decrease contamination to the air, water, and soil. However, the consequences of mercury accumulation are seen in their damaging effects to the rivers that deliver water to crops and cities, in the bays where food is extracted, and in the air of some cities where there exist mills that release chemical substances into the atmosphere.

Anaerobic Treatment of Municipal Solid Waste and Sludge for Energy Production and Recycling of Nutrients

NASA Astrophysics Data System (ADS)

Leinonen, S.

This volume contains 18 papers presented at a Nordic workshop dealing with application of anaerobic decomposition processes on various types of organic wastes, held at the Siikasalmi Research and Experimental Station of the University of Joensuu on 1-2 Oct. 1992. Subject coverage of the presentations extends from the biochemical and microbiological principles of organic waste processing to descriptions and practical experiences of various types of treatment plants. The theoretical and experimental papers include studies on anaerobic and thermophilic degradation processes, methanogenesis, effects of hydrogen, treatment of chlorinated and phenolic compounds, and process modeling, while the practical examples range from treatment of various types of municipal, industrial, and mining wastes to agricultural and fish farm effluents. The papers provide technical descriptions of several biogas plants in operation. Geographically, the presentations span the Nordic and Baltic countries.

MANAGEMENT AND TREATMENT OF WATER FROM HARD-ROCK MINES {ENGINEERING ISSUE}

EPA Science Inventory

This Engineering Issue document on treatment of mining waters is a practical guide to understanding and selecting technologies for the environmental management of waste materials and effluents at hard-rock mines. For the purposes of this discussion, hard-rock mining primarily ref...

SEASAT economic assessment. Volume 1: Summary and conclusions. [management analysis of the economic benefits of the SEASAT program

NASA Technical Reports Server (NTRS)

1975-01-01

A summary is presented of the economic benefits that can be derived from using the SEASAT Satellite System. A statement of the major findings of case studies of the practical applications of the SEASAT program to the following areas is given: (1) offshore oil and natural gas industry, (2) ocean mining, (3) coastal zones, (4) oil exploration in Arctic regions, (5) ocean fishing, and (6) ports and harbors. Also given is a description of the SEASAT System and its performance. A computer program, used to optimize SEASAT System's costs and operational requirements, is also considered.

Chronic intermittent high altitude exposure, occupation, and body mass index in workers of mining industry.

PubMed

Esenamanova, Marina K; Kochkorova, Firuza A; Tsivinskaya, Tatyana A; Vinnikov, Denis; Aikimbaev, Kairgeldy

2014-09-01

The obesity and overweight rates in population exposed to chronic intermittent exposure to high altitudes are not well studied. The aim of the retrospective study was to evaluate whether there are differences in body mass index in different occupation groups working in intermittent shifts at mining industry at high altitude: 3800-4500 meters above sea level. Our study demonstrated that obesity and overweight are common in workers of high altitude mining industry exposed to chronic intermittent hypoxia. The obesity rate was lowest among miners as compared to blue- and white-collar employees (9.5% vs. 15.6% and 14.7%, p=0.013). Obesity and overweight were associated with older age, higher rates of increased blood pressure (8.79% and 5.72% vs. 1.92%), cholesterol (45.8% and 45.6% vs. 32.8%) and glucose (4.3% and 1.26% vs. 0.57%) levels as compared to normal body mass index category (p<0.0001 for all). There were differences in patterns of cholesterol and glucose levels in men and women employees according to occupation type. In conclusion, obesity and overweight rates are prevalent and associated with increase in blood pressure, cholesterol, and glucose levels in workers of mining industry exposed to intermittent high-altitude hypoxia. Therefore, assessment and monitoring of body mass index seems to be essential in those who live and work at high altitudes to supply the correct nutrition, modify risk factors, and prevent related disorders.

Industrial wastewater treatment using higher aquatic vegetation in the former mining company of the Far Eastern Federal district

NASA Astrophysics Data System (ADS)

Krupskaya, L. T.; Zvereva, V. P.; Gula, K. E.; Gul', L. P.; Golubev, D. A.; Filatova, M. Yu.

2017-09-01

The article describes the results of studying the problems of industrial wastewater treatment using higher aquatic vegetation (hydrophytes) in the former mining enterprise of the Far Eastern Federal District (FEFD). They are aimed at reducing the negative environment impact of toxic tin ore wastes. The material of research were drainage, mine and slime waters as well as Lemna minor and Common reed grass (Phragmites communis). In the work conventional modern physico-chemical, chemical, biological and mathematical-statistical methods were used, as well as in the process of research the methods of atomic absorption spectrophotometry for AAS and mass spectrometry with inductively coupled plasma on ISP-MS ELASN DRS II PerkinElmer was applied. The data obtained in the course of the experiment (2015-2016), indicate that a degree of wastewater treatment, using Lemna minor, is high. Virtually, all compounds of toxic chemical elements contained in industrial wastewater (zinc, cobalt, nickel, cadmium, iron, manganese, lead, etc.) were fully absorbed by a hydrophyte. Pollutant extraction was almost 95%. The obtained results of the study in laboratory conditions proved the possibility of effective use of the Lemna minor for the purification of drainage and mine waters. A key contribution of this paper is the relationship between possible toxic metals contained in industrial wastewater and a higher degree of absorption by their higher aquatic vegetation. These hydrophytes absorb these possible toxic metals in an aqueous medium and are contaminated with these heavy metals.

Fluorspar

USGS Publications Warehouse

Miller, M.

1994-01-01

The U.S. exported approximately 52 kt of fluorspar in 1993. All reported production of fluorspar came from the Illinois mines of Elf Atochem. The U.S. consumed approximately 439 kt of fluorspar, according to preliminary U.S. Bureau of Mines figures. Fluorspar markets and industry developments are discussed.

AN OVERVIEW OF THE MINE WASTE TECHNOLOGY PROGRAM PROJECTS

EPA Science Inventory

The Mine Waste Technology Program (MWTP) is an interagency agreement with the DOE and has partnerships with Universities, Forest Service, BLM, Industry and states. The mission of the MWTP is to provide engineering solutions to national environmental issues resulting from the past...

DISTRIBUTION OF SEDIMENT MERCURY CONCENTRATIONS IN THE HUMBOLDT RIVER WATERSHED

EPA Science Inventory

In 1998 the United States Environmental Protection Agency (USEPA) required the mining industry to list all releases to the environment exceeding the Toxic Release Inventory (TRI) reporting threshold. Mining activities in Arizona, California and Nevada accounted for approx...

Streptomyces pactum assisted phytoremediation in Zn/Pb smelter contaminated soil of Feng County and its impact on enzymatic activities

PubMed Central

Ali, Amjad; Guo, Di; Mahar, Amanullah; Ma, Fang; Li, Ronghua; Shen, Feng; Wang, Ping; Zhang, Zengqiang

2017-01-01

Anthropogenic activities, such as industrial expansion, smelting, mining and agricultural practices, have intensified the discharge of potentially toxic trace elements (PTEs) into the environment, threatening human health and other organisms. To assist phytoremediation by sorghum in soil contaminated by smelters/mines in Feng County (FC), a pot experiment was performed to examine the phytoremediation potential of Streptomyces pactum (Act12) + biochar. The results showed that root uptake of Zn and Cd was reduced by 45 and 22%, respectively, while the uptake of Pb and Cu increased by 17 and 47%, respectively. The shoot and root dry weight and chlorophyll content improved after Act12 inoculation. β-glucosidase, alkaline phosphatase and urease activities in soil improved and antioxidant activities (POD, PAL, PPO) decreased after application of Act12 + biochar due to a reduction in stress from PTEs. BCF, TF and MEA confirmed the role of Act12 in the amelioration and translocation of PTEs. PCA analysis showed a correlation between different factors that affect the translocation of PTEs. Overall, Act12 promoted the phytoremediation of PTEs. Field experiments on Act12 + biochar may provide new insights into the rehabilitation and restoration of soils contaminated by mines. PMID:28387235

Streptomyces pactum assisted phytoremediation in Zn/Pb smelter contaminated soil of Feng County and its impact on enzymatic activities

NASA Astrophysics Data System (ADS)

Ali, Amjad; Guo, Di; Mahar, Amanullah; Ma, Fang; Li, Ronghua; Shen, Feng; Wang, Ping; Zhang, Zengqiang

2017-04-01

Anthropogenic activities, such as industrial expansion, smelting, mining and agricultural practices, have intensified the discharge of potentially toxic trace elements (PTEs) into the environment, threatening human health and other organisms. To assist phytoremediation by sorghum in soil contaminated by smelters/mines in Feng County (FC), a pot experiment was performed to examine the phytoremediation potential of Streptomyces pactum (Act12) + biochar. The results showed that root uptake of Zn and Cd was reduced by 45 and 22%, respectively, while the uptake of Pb and Cu increased by 17 and 47%, respectively. The shoot and root dry weight and chlorophyll content improved after Act12 inoculation. β-glucosidase, alkaline phosphatase and urease activities in soil improved and antioxidant activities (POD, PAL, PPO) decreased after application of Act12 + biochar due to a reduction in stress from PTEs. BCF, TF and MEA confirmed the role of Act12 in the amelioration and translocation of PTEs. PCA analysis showed a correlation between different factors that affect the translocation of PTEs. Overall, Act12 promoted the phytoremediation of PTEs. Field experiments on Act12 + biochar may provide new insights into the rehabilitation and restoration of soils contaminated by mines.

Feasibility of CO2 Sequestration as a Closure Option for Underground Coal Mine

NASA Astrophysics Data System (ADS)

Ray, Sutapa; Dey, Kaushik

2018-04-01

The Kyoto Protocol, 1998, was signed by member countries to reduce greenhouse gas (GHG) emissions to a minimum acceptable level. India agreed to Kyoto Protocol since 2002 and started its research on GHG mitigation. Few researchers have carried out research work on CO2 sequestration in different rock formations. However, CO2 sequestration in abandoned mines has yet not drawn its attention largely. In the past few years or decades, a significant amount of research and development has been done on Carbon Capture and Storage (CCS) technologies, since it is a possible solution for assuring less emission of CO2 to the atmosphere from power plants and some other major industrial plants. CCS mainly involves three steps: (a) capture and compression of CO2 from source (power plants and industrial areas), (b) transportation of captured CO2 to the storage mine and (c) injecting CO2 into underground mine. CO2 is stored at an underground mine mainly in three forms: (1) adsorbed in the coals left as pillars of the mine, (2) absorbed in water through a chemical process and (3) filled in void with compressed CO2. Adsorption isotherm is a graph developed between the amounts of adsorbate adsorbed on the surface of adsorbent and the pressure at constant temperature. Various types of adsorption isotherms are available, namely, Freundlich, Langmuir and BET theory. Indian coal is different in origin from most of the international coal deposits and thus demands isotherm experiments of the same to arrive at the right adsorption isotherm. To carry out these experiments, adsorption isotherm set up is fabricated in the laboratory with a capacity to measure the adsorbed volume up to a pressure level of 100 bar. The coal samples are collected from the pillars and walls of the underground coal seam using a portable drill machine. The adsorption isotherm experiments have been carried out for the samples taken from a mine. From the adsorption isotherm experiments, Langmuir Equation is found to be more acceptable as compared to Freundlich's and BET adsorption isotherm models. CO2 is soluble in water and is reversibly formed carbonic acid. It is a weak acid since its ionization in water is incomplete. The CO2 solubility in water is estimated from the experimental results published by Wiebe and Gaddy. In most of the cases of abandoned mines, the chances of available air filled void space is limited as the level of operation is below the water table. So it is expected that the void would be completely filled with water. During this research investigation, the practical experimentation for CO2 sequestration was not within the scope. Thus, one operating mine was considered for the feasibility study. The sequestrated quantities of CO2 in terms of adsorbed volume and soluble volume were quantified. The cost of the CO2 was taken from the standard international literature. The sealing cost of the shaft was also considered. Costs of CO2 sequestration for different pressure were estimated for the mine.

Public health implications of changing patterns of recruitment into the South African mining industry, 1973-2012: a database analysis.

PubMed

Ehrlich, Rodney; Montgomery, Alex; Akugizibwe, Paula; Gonsalves, Gregg

2017-08-03

The triple epidemic of silicosis, tuberculosis and HIV infection among migrant miners from South Africa and neighbouring countries who have worked in the South African mining industry is currently the target of regional and international control efforts. These initiatives are hampered by a lack of information on this population. This study analysed the major South African mining recruitment database for the period 1973 to 2012 by calendar intervals and demographic and occupational characteristics. Changes in area of recruitment were mapped using a geographic information system. The database contained over 10 million contracts, reducible to 1.64 million individuals. Major trends relevant to health projection were a decline in gold mining employment, the major source of silicosis; increasing recruitment of female miners; and shifts in recruitment from foreign to South African miners, from the Eastern to the Northwestern parts of South Africa, and from company employees to contractors. These changes portend further externalisation of the burden of mining lung disease to home communities, as miners, particularly from the gold sector, leave the industry. The implications for health, surveillance and health services of the growing number of miners hired as contractors need further research, as does the health experience of female miners. Overall, the information in this report can be used for projection of disease burden and direction of compensation, screening and treatment services for the ex-miner population throughout Southern Africa.

An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest

PubMed Central

Kim, Sung-Min; Yi, Huiuk; Choi, Yosoon

2017-01-01

In this study, current geographic information system (GIS)-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or three subtopics according to the steps involved in the reclamation procedure, or elements of the hazard of interest. Because GIS is appropriated for the handling of geospatial data in relation to mining-induced hazards, the application and feasibility of exploiting GIS-based modeling and assessment of mining-induced hazards within the mining industry could be expanded further. PMID:29186922

An Overview of GIS-Based Modeling and Assessment of Mining-Induced Hazards: Soil, Water, and Forest.

PubMed

Suh, Jangwon; Kim, Sung-Min; Yi, Huiuk; Choi, Yosoon

2017-11-27

In this study, current geographic information system (GIS)-based methods and their application for the modeling and assessment of mining-induced hazards were reviewed. Various types of mining-induced hazard, including soil contamination, soil erosion, water pollution, and deforestation were considered in the discussion of the strength and role of GIS as a viable problem-solving tool in relation to mining-induced hazards. The various types of mining-induced hazard were classified into two or three subtopics according to the steps involved in the reclamation procedure, or elements of the hazard of interest. Because GIS is appropriated for the handling of geospatial data in relation to mining-induced hazards, the application and feasibility of exploiting GIS-based modeling and assessment of mining-induced hazards within the mining industry could be expanded further.

Exploring virtual mental practice in maintenance task training.

PubMed

Bauerle, Tim; Brnich, Michael J; Navoyski, Jason

- This paper aims to contribute to a general understanding of mental practice by investigating the utility of and participant reaction to a virtual reality maintenance training among underground coal mine first responders. - Researchers at the National Institute for Occupational Safety and Health's Office of Mine Safety and Health Research (OMSHR) developed software to provide opportunities for mine rescue team members to learn to inspect, assemble and test their closed-circuit breathing apparatus and to practice those skills. In total, 31 mine rescue team members utilized OMSHR's BG 4 Benching Trainer software and provided feedback to the development team. After training, participants completed a brief post-training questionnaire, which included demographics, perceived training climate and general training evaluation items. - The results overall indicate a generally positive reaction to and high perceived utility of the BG 4 benching software. In addition, the perceived training climate appears to have an effect on the perceived utility of the mental practice virtual reality game, with benchmen from mines with more positive training climates reporting greater perceived efficacy in the training's ability to prepare trainees for real emergencies. - This paper helps to broaden current applications of mental practice and is one of the few empirical investigations into a non-rehabilitation virtual reality extension of mental practice. This paper also contributes to the growing literature advocating for greater usage of accurate and well-informed mental practice techniques, tools and methodologies, especially for occupational populations with limitations on exposure to hands-on training.

DEVELOPMENT AND DEMONSTRATION OF A PILOT SCALE FACILITY FOR FABRICATION AND MARKETING OF LIGHTWEIGHT-COAL COMBUSTION BYPRODUCTS-BASED SUPPORTS AND MINE VENTILATION BLOCKS FOR UNDERGROUND MINES

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yoginder P. Chugh

2002-10-01

The overall goal of this program was to develop a pilot scale facility, and design, fabricate, and market CCBs-based lightweight blocks for mine ventilation control devices, and engineered crib elements and posts for use as artificial supports in underground mines to replace similar wooden elements. This specific project was undertaken to (1) design a pilot scale facility to develop and demonstrate commercial production techniques, and (2) provide technical and marketing support to Fly Lite, Inc to operate the pilot scale facility. Fly Lite, Inc is a joint venture company of the three industrial cooperators who were involved in research intomore » the development of CCBs-based structural materials. The Fly-Lite pilot scale facility is located in McLeansboro, Illinois. Lightweight blocks for use in ventilation stoppings in underground mines have been successfully produced and marketed by the pilot-scale facility. To date, over 16,000 lightweight blocks (30-40 pcf) have been sold to the mining industry. Additionally, a smaller width (6-inch) full-density block was developed in August-September 2002 at the request of a mining company. An application has been submitted to Mine Safety and Health Administration for the developed block approval for use in mines. Commercialization of cribs and posts has also been accomplished. Two generations of cribs have been developed and demonstrated in the field. MSHA designated them suitable for use in mines. To date, over 2,000 crib elements have been sold to mines in Illinois. Two generations of posts were also demonstrated in the field and designated as suitable for use in mines by MSHA. Negotiations are currently underway with a mine in Illinois to market about 1,000 posts per year based on a field demonstration in their mine. It is estimated that 4-5 million tons CCBs (F-fly ash or FBC fly ash) may be utilized if the developed products can be commercially implemented in U.S. coal and non-coal mines.« less

Characterization of airborne float coal dust emitted during continuous mining, longwall mining and belt transport

PubMed Central

Shahan, M.R.; Seaman, C.E.; Beck, T.W.; Colinet, J.F.; Mischler, S.E.

2017-01-01

Float coal dust is produced by various mining methods, carried by ventilating air and deposited on the floor, roof and ribs of mine airways. If deposited, float dust is re-entrained during a methane explosion. Without sufficient inert rock dust quantities, this float coal dust can propagate an explosion throughout mining entries. Consequently, controlling float coal dust is of critical interest to mining operations. Rock dusting, which is the adding of inert material to airway surfaces, is the main control technique currently used by the coal mining industry to reduce the float coal dust explosion hazard. To assist the industry in reducing this hazard, the Pittsburgh Mining Research Division of the U.S. National Institute for Occupational Safety and Health initiated a project to investigate methods and technologies to reduce float coal dust in underground coal mines through prevention, capture and suppression prior to deposition. Field characterization studies were performed to determine quantitatively the sources, types and amounts of dust produced during various coal mining processes. The operations chosen for study were a continuous miner section, a longwall section and a coal-handling facility. For each of these operations, the primary dust sources were confirmed to be the continuous mining machine, longwall shearer and conveyor belt transfer points, respectively. Respirable and total airborne float dust samples were collected and analyzed for each operation, and the ratio of total airborne float coal dust to respirable dust was calculated. During the continuous mining process, the ratio of total airborne float coal dust to respirable dust ranged from 10.3 to 13.8. The ratios measured on the longwall face were between 18.5 and 21.5. The total airborne float coal dust to respirable dust ratio observed during belt transport ranged between 7.5 and 21.8. PMID:28936001

Sampling and monitoring for closure

USGS Publications Warehouse

McLemore, Virginia T.; Smith, Kathleen S.; Russell, Carol C.

2007-01-01

An important aspect of planning a new mine or mine expansion within the modern regulatory framework is to design for ultimate closure. Sampling and monitoring for closure is a form of environmental risk management. By implementing a sampling and monitoring program early in the life of the mining operation, major costs can be avoided or minimized. The costs for treating mine drainage in perpetuity are staggering, especially if they are unanticipated. The Metal Mining Sector of the Acid Drainage Technology Initiative (ADTI-MMS), a cooperative government-industry-academia organization, was established to address drainage-quality technologies of metal mining and metallurgical operations. ADTI-MMS recommends that sampling and monitoring programs consider the entire mine-life cycle and that data needed for closure of an operation be collected from exploration through postclosure.

Application of ERTS-1 imagery to fracture related mine safety hazards in the coal mining industry. [Indiana

NASA Technical Reports Server (NTRS)

Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T. V.

1974-01-01

The author has identified the following significant results. New fracture detail of Indiana has been observed and mapped from ERTS-1 imagery. Studies so far indicate a close relationship between the directions of fracture traces mapped from the imagery, fractures measured on bedrock outcrops, and fractures measured in the underground mines. First hand observations and discussions with underground mine operators indicate good correlation of mine hazard maps prepared from ERTS-1/aircraft imagery and actual roof falls. The inventory of refuse piles/slurry ponds of the coal field of Indiana has identified over 225 such sites from past mining operations. These data will serve the State Legislature in making tax decisions on coal mining which take on increased importance because of the energy crisis.

Deep Submarine Tailings Disposal (DSTP) the Proposed Use of Submarine Canyons and Artificial Turbidity Currents for the Disposal of Mine Waste: Current Practice, Future Plans, and Cumulative Impacts.

NASA Astrophysics Data System (ADS)

Young, R.; Moran, R.

2015-12-01

The wastes from mining operations ( tailings) have been disposed of in the fluvial environment (riverine disposal) and in nearshore marine environments for much of the last century. The scale of modern mining operations has led to increasing use of steep slopes and submarine canyons for deposition of these wastes at depths of 2000m - 4000m. Current mine disposal operations in Indonesia and Papua New Guinea which use Deep Sea Tailings Placement (DSTP) release volumes between 5000 tpd and 160,000 tpd. Planning is underway by the"Consortium," an industry and government group in Chile which would deposit mine waste of 1M tpd into the Humbolt Current Large Marine Ecosystem (HCLME) which provides nearly 20% of the fish biomass harvested on a sustainable basis worldwide. Underwater pipelines discharge tailings as a slurry to create a continuous artificial turbidity current with particle size distribtions (PSD's) ranging from sand to clay sized fractions. Potential problems arise from benthic smothering, angular particulate uptake by benthic organisms, and from the bioaccumulation of a complex of heavy metals by both benthic and pelagic species. While much is known about the binding of copper and other toxic heavy metals in a reducing environment, little has been done to consider the implications of ocean dumping where 1% of tailings discharged may consist of unrecovered heavy metals. Synergistic cumulative impacts to just the HCLME from the dumping of the more than 3M tpy of reactive metals in these tailings sediments remains unknown and poses substantial risks. DSTP assumes a stable deep sea depositional environment but upwelling currents and plume shear may make this hard to accomplish.

Sleights of Hand: South Africa's Gold Mines and Occupational Disease.

PubMed

McCulloch, Jock

2016-02-01

South Africa's gold mines were the first to compensate silicosis and tuberculosis as occupational diseases. They were also the first mines to introduce a state-sanctioned regime of medical surveillance. Despite those innovations, the major mining houses are currently facing class actions by former miners with occupational lung disease. The obvious reason for this medical and legislative failure is to be found in the economic fabric of South Africa's gold industry. In this article, I will argue that it is also found in the system of mine medicine, which was designed to hide rather than reveal the actual disease rates. © The Author(s) 2016.

Financial Responsibility Calculator to Accompany Proposed Requirements Under CERCLA Section 108(b) For Classes of Facilities in the Hardrock Mining Industry

EPA Pesticide Factsheets

This calculator will help stakeholders (owners and operators) of hardrock mines or mineral processing facilities calculate the amount of financial responsibility they should obtain under the proposed CERCLA 108b requirements

The 2017 Space Resources Roundtable and New Space Resources Graduate Program at Colorado School of Mines

NASA Astrophysics Data System (ADS)

Abbud-Madrid, A.

2017-10-01

For eighteen years, SRR has brought together interested individuals from the space exploration community, the mining and minerals industries, and the financial sector to discuss issues related to the ISRU of lunar, asteroidal, and martian resources.

Estimates and Predictions of Coal Workers’ Pneumoconiosis Cases among Redeployed Coal Workers of the Fuxin Mining Industry Group in China: A Historical Cohort Study

PubMed Central

Han, Bing; Liu, Hongbo; Zhai, Guojiang; Wang, Qun; Liang, Jie; Zhang, Mengcang; Cui, Kai; Shen, Fuhai; Yi, Hongbo; Li, Yuting; Zhai, Yuhan; Sheng, Yang; Chen, Jie

2016-01-01

This research was aimed at estimating possible Coal workers’ pneumoconiosis (CWP) cases as of 2012, and predicting future CWP cases among redeployed coal workers from the Fuxin Mining Industry Group. This study provided the scientific basis for regulations on CWP screening and diagnosis and labor insurance policies for redeployed coal workers of resource-exhausted mines. The study cohort included 19,116 coal workers. The cumulative incidence of CWP was calculated by the life-table method. Possible CWP cases by occupational category were estimated through the average annual incidence rate of CWP and males’ life expectancy. It was estimated that 141 redeployed coal workers might have suffered from CWP as of 2012, and 221 redeployed coal workers could suffer from CWP in the future. It is crucial to establish a set of feasible and affordable regulations on CWP screening and diagnosis as well as labor insurance policies for redeployed coal workers of resource-exhausted coal mines in China. PMID:26845337

Estimates and Predictions of Coal Workers' Pneumoconiosis Cases among Redeployed Coal Workers of the Fuxin Mining Industry Group in China: A Historical Cohort Study.

PubMed

Han, Bing; Liu, Hongbo; Zhai, Guojiang; Wang, Qun; Liang, Jie; Zhang, Mengcang; Cui, Kai; Shen, Fuhai; Yi, Hongbo; Li, Yuting; Zhai, Yuhan; Sheng, Yang; Chen, Jie

2016-01-01

This research was aimed at estimating possible Coal workers' pneumoconiosis (CWP) cases as of 2012, and predicting future CWP cases among redeployed coal workers from the Fuxin Mining Industry Group. This study provided the scientific basis for regulations on CWP screening and diagnosis and labor insurance policies for redeployed coal workers of resource-exhausted mines. The study cohort included 19,116 coal workers. The cumulative incidence of CWP was calculated by the life-table method. Possible CWP cases by occupational category were estimated through the average annual incidence rate of CWP and males' life expectancy. It was estimated that 141 redeployed coal workers might have suffered from CWP as of 2012, and 221 redeployed coal workers could suffer from CWP in the future. It is crucial to establish a set of feasible and affordable regulations on CWP screening and diagnosis as well as labor insurance policies for redeployed coal workers of resource-exhausted coal mines in China.

Widespread waterborne pollution in central Swedish lakes and the Baltic Sea from pre-industrial mining and metallurgy.

PubMed

Bindler, Richard; Renberg, Ingemar; Rydberg, Johan; Andrén, Thomas

2009-07-01

Metal pollution is viewed as a modern problem that began in the 19th century and accelerated through the 20th century; however, in many parts of the globe this view is wrong. Here, we studied past waterborne metal pollution in lake sediments from the Bergslagen region in central Sweden, one of many historically important mining regions in Europe. With a focus on lead (including isotopes), we trace mining impacts from a local scale, through a 120-km-long river system draining into Mälaren--Sweden's third largest lake, and finally also the Baltic Sea. Comparison of sediment and peat records shows that pollution from Swedish mining was largely waterborne and that atmospheric deposition was dominated by long-range transport from other regions. Swedish ore lead is detectable from the 10th century, but the greatest impact occurred during the 16th-18th centuries with improvements occurring over recent centuries, i.e., historical pollution > modern industrial pollution.

Mine Safety and Health Administration's Part 50 program does not fully capture chronic disease and injury in the Illinois mining industry.

PubMed

Almberg, Kirsten S; Friedman, Lee S; Swedler, David; Cohen, Robert A

2018-05-01

The Mine Safety and Health Administration (MSHA) requires reporting of injuries and illnesses to their Part 50 program. A 2011 study indicated that the Part 50 program did not capture many cases of injury in Kentucky, causing concern about underreporting in other states. MSHA Part 50 reports from Illinois for 2001-2013 were linked to Illinois Workers' Compensation Commission (IWCC) data. IWCC cases not found in the Part 50 data were considered unreported. Overall, the Part 50 Program did not capture 66% of IWCC cases from 2001 to 2013. Chronic injuries or illnesses were more likely to be unreported to MSHA. The majority of occupational injuries and illnesses found in the IWCC from this time period, were not captured by Part 50. Inaccurate reporting of injuries and illnesses to the Part 50 program hinders MSHA's ability to enforce safety and health standards in the mining industry. © 2018 Wiley Periodicals, Inc.

Business confidence still high in Zimbabwe.

PubMed

Amanor-wilks, D

1995-12-01

Business confidence has not been affected in Zimbabwe despite the AIDS epidemic in that country. An Australian mining company has recruited people to work at its platinum mine in Zimbabwe and also instituted an AIDS awareness program. The National Chamber of Commerce disclosed that semiskilled and unskilled workers who are the "easiest to replace" have been most affected by the epidemic. The impact of AIDS has not been as bad as had been predicted several years ago. By the end of the 1990s, however, there might be a skills shortage. The first AIDS case was detected in 1985 in Zimbabwe. By the end of 1995 a cumulative total of 38,500 cases had been reported, but the National AIDS Control Program believes that the true figure is over 100,000. The estimated number of HIV-infected people is about 1 million. The most economically productive age group (30-50) has the highest rates of infection. Transport is affected most, followed by mining and commercial farming. Infection rates among miners are estimated to be 20-30% and the rates are the highest at the mines on the major transport routes. The mining industry has not had any problems in recruiting labor, but, increasingly, deaths are AIDS-related. The growing sex industry at the mines has accelerated the spread of HIV. In addition, small mines do not have AIDS awareness programs in place. The National Employment Council runs a project for the transport industry, which seeks to intensify AIDS campaigns at truck stops. This also entails talks to drivers about AIDS; courses for police, nurses, and sex workers; and the distribution of condoms. In commercial farming, two-thirds of workers are unskilled casual laborers who live in squalid conditions that foster the spread of AIDS. At these farms there is also a growing number of orphans, whose number is estimated to rise to 60,000 by the late 1990s.

Mining Critical Metals and Elements from Seawater: Opportunities and Challenges.

PubMed

Diallo, Mamadou S; Kotte, Madhusudhana Rao; Cho, Manki

2015-08-18

The availability and sustainable supply of technology metals and valuable elements is critical to the global economy. There is a growing realization that the development and deployment of the clean energy technologies and sustainable products and manufacturing industries of the 21st century will require large amounts of critical metals and valuable elements including rare-earth elements (REEs), platinum group metals (PGMs), lithium, copper, cobalt, silver, and gold. Advances in industrial ecology, water purification, and resource recovery have established that seawater is an important and largely untapped source of technology metals and valuable elements. This feature article discusses the opportunities and challenges of mining critical metals and elements from seawater. We highlight recent advances and provide an outlook of the future of metal mining and resource recovery from seawater.

Seamount mineral deposits: A source of rare metals for high technology industries

USGS Publications Warehouse

Hein, James R.; Conrad, Tracey A.; Staudigel, Hubert

2010-01-01

The near exponential growth in Earth’s population and the global economy puts increasing constraints on our planet’s finite supply of natural metal resources, and, consequently, there is an increasing need for new sources to supply high-tech industries. To date, effectively all of our raw-metal resources are produced at land-based sites. Except for nearshore placer deposits, the marine environment has been largely excluded from metal mining due to technological difficulties, even though it covers more than 70% of the planet. The case can be made that deep-water seabed mining is inevitable in the future, owing to the critical and strategic metal needs for human society. In this paper, we evaluate the case that seamounts offer significant potential for mining.

Impact of surface coal mining on soil hydraulic properties

Treesearch

X. Liu; J. Q. Wu; P. W. Conrad; S. Dun; C. S. Todd; R. L. McNearny; William Elliot; H. Rhee; P. Clark

2016-01-01

Soil erosion is strongly related to soil hydraulic properties. Understanding how surface coal mining affects these properties is therefore important in developing effective management practices to control erosion during reclamation. To determine the impact of mining activities on soil hydraulic properties, soils from undisturbed areas, areas of roughly graded mine...

Mining review

USGS Publications Warehouse

McCartan, L.; Morse, D.E.; Plunkert, P.A.; Sibley, S.F.

2004-01-01

The average annual growth rate of real gross domestic product (GDP) from the third quarter of 2001 through the second quarter of 2003 in the United States was about 2.6 percent. GDP growth rates in the third and fourth quarters of 2003 were about 8 percent and 4 percent, respectively. The upward trends in many sectors of the U.S. economy in 2003, however, were shared by few of the mineral materials industries. Annual output declined in most nonfuel mining and mineral processing industries, although there was an upward turn toward yearend as prices began to increase.

Cultural Heritage Documentation and Integrated Geomatics Techniques in AN Educational Context: Case Bois-Du (belgium)

NASA Astrophysics Data System (ADS)

Stal, C.; Goossens, R.; Carlier, L.; Debie, J.; Haoudy, K.; Nuttens, T.; De Wulf, A.

2013-07-01

The Walloon Region in Belgium played a leading role in the world economy and in the industrial sciences and engineering since the 19th century. Several relicts, such as important industrial buildings or sites, are spread over a large area and are still dominating the current landscape. Some of these remnants are preserved as monuments, representing the industrial, cultural and ecological transition of the region during the last two centuries. Since 2012, UNESCO recognized the importance of four of the best preserved 19th and 20th century coal mining sites and classified them as World Heritage ("Major Mining Sites of Wallonia", Le Grand-Hornu, Bois-du- Luc, Le Bois du Cazier and Blegny Mine). The four recognised mining sites together form a strip of about 170 km long, containing important examples of the so-called 'neo classical architecture' from the early periods of the industrial era in continental Europe. Motivated by this recognition and by the huge touristic and educational potential of the sites, a partnership between the Walloon government and Ghent University was organized. In this first stage, the collaboration focuses on the site of Bois-du-Luc in the municipality of La Louvière, containing a large series of dwellings, several equipments built between 1853 and 1923 by the Société des Charbonnages du Bois-du-Luc, workshops and heaps. Consisting of numerous buildings dating back to the period between 1838 and 1923, this site is one of Europe's oldest collieries. The collaboration between the Walloon government and Ghent University - Department of Geography fits in the hands-on training which students in land surveying and geomatics receive during their Bachelor studies. For the students it is very interesting that their practical exercises are not limited to the university campus, but that they are involved in a real measurement campaign. The project consists of a series of intensive land surveying campaigns, resulting in highly detailed and accurate maps of the site, including the inside domain of the buildings. Already available aerial photographs are processed to obtain a 3D model of the site and the wider region. In March 2013, the first campaign took place. During this first campaign, a topographical network was set out and a series of detail points were measured for the detailed topographic mapping. The topographical network was well-planned and covers almost the whole site, forming a set of permanently materialized reference points for later measurements. Besides, a large number of ground control points (GCPs) were taken for the 3D reconstruction of the area, based on high resolution airborne imagery. This enables the students to familiarize themselves with photogrammetric principles in a practical exercise. Both the topographic maps and the 3D model fit within the large scale geographic reference map of the Walloon Region. In this contribution, the results of this intensive trans-regional collaboration on the preservation of the sites are presented. This paper will discuss the first deliverables from the project and the advantages for the responsible government, the cultural heritage organisations (Ecomusée du Bois-du-Luc) and the students. The main focus here is on the educational context of the project. Furthermore, future projects on the same site will be discussed.

Mineral commodity profiles: Silver

USGS Publications Warehouse

Butterman, W.C.; Hilliard, Henry E.

2005-01-01

Overview -- Silver is one of the eight precious, or noble, metals; the others are gold and the six platinum-group metals (PGM). World mine production in 2001 was 18,700 metric tons (t) and came from mines in 60 countries; the 10 leading producing countries accounted for 86 percent of the total. The largest producer was Mexico, followed by Peru, Australia, and the United States. About 25 percent of the silver mined in the world in 2001 came from silver ores; 15 percent, from gold ores and the remaining 60 percent, from copper, lead, and zinc ores. In the United States, 14 percent of the silver mined in 2001 came from silver ores; 39 percent, from gold ores; 10 percent, from copper and copper-molybdenum ores; and 37 percent, from lead, zinc, and lead-zinc ores. The precious metal ores (gold and silver) came from 30 lode mines and 10 placer mines; the base-metal ores (copper, lead, molybdenum, and zinc) came from 24 lode mines. Placer mines yielded less than 1 percent of the national silver production. Silver was mined in 12 States, of which Nevada was by far the largest producer; it accounted for nearly one-third of the national total. The production of silver at domestic mines generated employment for about 1,100 mine and mill workers. The value of mined domestic silver was estimated to be $290 million. Of the nearly 27,000 t of world silver that was fabricated in 2001, about one-third went into jewelry and silverware, one-fourth into the light-sensitive compounds used in photography, and nearly all the remainder went for industrial uses, of which there were 7 substantial uses and many other small-volume uses. By comparison, 85 percent of the silver used in the United States went to photography and industrial uses, 8 percent to jewelry and silverware, and 7 percent to coins and medals. The United States was the largest consumer of silver followed by India, Japan, and Italy; the 13 largest consuming countries accounted for nearly 90 percent of the world total. In the United States, about 30 companies accounted for more than 90 percent of the silver fabricated. The consumption of silver for all fabrication uses is expected to grow slowly through the decade ending in 2010 at about 1.3 percent per year for the world and 2.4 percent per year for the United States. World and U.S. reserves and reserve bases are more than adequate to satisfy the demand for newly mined silver through 2010. The other components of supply will be silver recovered from scrap, silver from industrial stocks, and silver bullion that is sold into the market from commodity exchange and private stocks.

Assessing Health Impacts within Environmental Impact Assessments: An Opportunity for Public Health Globally Which Must Not Remain Missed

PubMed Central

Harris, Patrick; Viliani, Francesca; Spickett, Jeff

2015-01-01

Within the member states of the United Nations 190 of 193 have regulated Environmental Impact Assessments (EIA) which is a systematic process to prevent and mitigate the potential environmental impacts of industry development projects before these occur. However, the routine and comprehensive assessment of health impacts within EIAs remains underdeveloped. Focusing, as an example, on the risks to global health from the global shift in the mining industry towards Low and Middle Income Countries LMIC), this viewpoint details why connecting with EIA is an essential task for the health system. Although existing knowledge is out of date in relation to global practice we identify how health has been included, to some extent, in High Income Country EIAs and the institutional requirements for doing so. Using arguments identified by industry themselves about requiring a ‘social license to operate’, we conclude that EIA regulations provide the best current mechanism to ensure health protection is a core aspect in the decision making process to approve projects. PMID:25608592

Systematic review: Lost-time injuries in the US mining industry.

PubMed

Nowrouzi-Kia, B; Sharma, B; Dignard, C; Kerekes, Z; Dumond, J; Li, A; Larivière, M

2017-08-01

The mining industry is associated with high levels of accidents, injuries and illnesses. Lost-time injuries are useful measures of health and safety in mines, and the effectiveness of its safety programmes. To identify the type of lost-time injuries in the US mining workforce and to examine predictors of these occupational injuries. Primary papers on lost-time injuries in the US mining sector were identified through a literature search in eight health, geology and mining databases, using a systematic review protocol tailored to each database. The Critical Appraisal Skills Programme (CASP), Framework of Quality Assurance for Administrative Data Source and the Cochrane Collaboration 'Risk of bias' assessment tools were used to assess study quality. A total of 1736 articles were retrieved before duplicates were removed. Fifteen articles were ultimately included with a CASP mean score of 6.33 (SD 0.62) out of 10. Predictors of lost-time injuries included slips and falls, electric injuries, use of mining equipment, working in underground mining, worker's age and occupational experience. This is the first systematic review of lost-time injuries in the US mining sector. The results support the need for further research on factors that contribute to workplace lost-time injuries as there is limited literature on the topic. Safety analytics should also be applied to uncover new trends and predict the likelihood of future incidents before they occur. New insights will allow employers to prevent injuries and foster a safer workplace environment by implementing successful occupational health and safety programmes. © The Author 2017. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com

30 CFR 70.1900 - Exhaust Gas Monitoring.

Code of Federal Regulations, 2010 CFR

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Exhaust Gas Monitoring. 70.1900 Section 70.1900... MANDATORY HEALTH STANDARDS-UNDERGROUND COAL MINES DIESEL EXHAUST GAS MONITORING § 70.1900 Exhaust Gas... ®) adopted by the American Conference of Governmental Industrial Hygienists, the mine operator shall...

Omnidirectional Learning - A New Paradigm for Learning to Predict Any Set of Variables from Any Other Set

DTIC Science & Technology

2016-05-06

ABSTRACT Awards: Best Paper Honorable Mention Award at the SIAM (Society for Industrial and Applied Mathematics Conference on Data Mining (SDM...magnitude in computation time over the state of the art. 15. SUBJECT TERMS Data Mining 16. SECURITY CLASSIFICATION OF: 17...International Conference on Data Mining and received Best Paper Honorable mention. To ensure broad use and uptake of the outcomes of this research

Reagents and fractions impact on sulphide ore heap bioleaching at Smolnik mine

NASA Astrophysics Data System (ADS)

Oros, L. M.; Zavada, J.

2017-10-01

Mine Smolnik is one of the oldest sulphide ore mines in Europe and it is also an important part of bioleaching development. This paper follows previous attempts to extract residual metals from nearby heaps via variations in bioleaching reagents with regard to recent findings and needs in the related industry. Furthermore, economic and process relations between reagents and chosen heap fractions were also investigated in this case study.

Review of Studies of Mechanoelectrical Transformations in Rocks in Russia and Abroad

NASA Astrophysics Data System (ADS)

Pomishin, E.; Yavorovich, L.

2016-06-01

The problem of monitoring and forecast of dynamic manifestations of rock masses becomes immediate in the mining industry because of the growth of mining work intensity and changeover to the mining operations in deeper levels. The article presents a short review of the scientific works of foreign researchers for more complete and in-depth study of geophysical methods of control of the stress-strain state and bump hazard of rock masses.

Microbial genome mining for accelerated natural products discovery: is a renaissance in the making?

PubMed

Bachmann, Brian O; Van Lanen, Steven G; Baltz, Richard H

2014-02-01

Microbial genome mining is a rapidly developing approach to discover new and novel secondary metabolites for drug discovery. Many advances have been made in the past decade to facilitate genome mining, and these are reviewed in this Special Issue of the Journal of Industrial Microbiology and Biotechnology. In this Introductory Review, we discuss the concept of genome mining and why it is important for the revitalization of natural product discovery; what microbes show the most promise for focused genome mining; how microbial genomes can be mined; how genome mining can be leveraged with other technologies; how progress on genome mining can be accelerated; and who should fund future progress in this promising field. We direct interested readers to more focused reviews on the individual topics in this Special Issue for more detailed summaries on the current state-of-the-art.

Identification of Work-Related Musculoskeletal Disorders in Mining

PubMed Central

Weston, Eric; Pollard, Jonisha P.

2016-01-01

Work-related musculoskeletal disorder (WMSD) prevention measures have been studied in great depth throughout various industries. While the nature and causes of these disorders have been characterized in many industries, WMSDs occurring in the U.S. mining sector have not been characterized for several years. In this report, MSHA accident/injury/illness data from 2009 to 2013 were characterized to determine the most frequently reported WMSDs in the U.S. mining sector. WMSDs were most frequently reported in workers with less than 5 years or more than 20 years of mining experience. The number of days lost from work was the highest for shoulder and knee injuries and was found to increase with worker age. Underground and surface coal, surface stone and stone processing plants experienced the greatest number of WMSDs over the period studied. WMSDs were most commonly caused by an employee suffering from an overexertion, falls or being struck by an object while performing materials handling, maintenance and repair tasks, getting on or off equipment or machines, and walking or running. The injury trends presented should be used to help determine the focus of future WMSD prevention research in mining. PMID:27294012

A big picture look at big coal: Teaching students to link societal and environmental issues

NASA Astrophysics Data System (ADS)

Sojka, S. L.

2014-12-01

The environmental impact of coal mining and burning of coal is evident and generally easy to understand. However, students often struggle to understand the social impacts of coal mining. A jigsaw activity culminating in a mock town hall meeting helps students link social, economic and environmental impacts of coal mining. Students are divided into four groups and assigned the task of researching the environmental, social, economic or health impacts of coal mining in West Virginia. When students have completed the research, they are assigned a role for the town hall. Roles include local community members, direct employees of the coal industry, business owners from industries related to coal mining, and environmentalists. One student from each research area is assigned to each role, forcing students to consider environmental, social, health and economic aspects of coal mining in choosing an appropriate position for their role. Students have 30 minutes to prepare their positions and then present for 2-5 minutes in the simulated town hall. We then have open class discussion and review the positions. Finally, students are required to write a letter to the editor of the local paper. The specific topic for the town hall and letters can be varied based on current events and could include new regulations on power plants, mine safety, government funding of alternative energy supplies or a range of other topics. This approach forces students to consider all aspects of the issue. In addition, because students have to assume a role, they are more aware of the direct impact that coal mining has on individuals' lives.

Recent trends in Cuba’s mining and petroleum industries

USGS Publications Warehouse

Wacaster, Susan; Baker, Michael S.; Soto-Viruet, Yadira; Textoris, Steven D.

2015-03-31

In response to recent diplomatic developments between Cuba and the United States, the National Minerals Information Center compiled available information on the mineral industries of Cuba. This fact sheet highlights a new map and table that identify mines, mineral processing facilities, and petroleum facilities as well as information on location, operational status, and ownership. It also addresses the current status of known mineral industry projects, historical developments, and trends of the Cuban economy with an emphasis on mineral industries, and the supply and demand for Cuba’s mineral resources.In 2013, Cuba was estimated to be among the world’s top ten producers of cobalt and nickel, which are the country’s leading exports. Cuba’s current crude oil and associated natural gas production from onshore and shallow water coastal reservoirs is approximately 50,000 barrels per day of liquids and about 20,000 barrels per day oil equivalent of natural gas. In 2013, the value of mining and quarrying activities accounted for 0.6 percent of Cuba’s gross domestic product (GDP), compared with 1.4 percent in 2000. The value of production from Cuba’s industrial manufacturing sector increased by 88 percent between 1993 and 2013, whereas the sector’s share in the GDP decreased by about 3 percent during the same time period reflecting economic growth in other sectors of the economy.

Mines in the Four Corners anticipate growth

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buchsbaum, L.

2008-02-15

Productive mines in the southwest deplete reserves, while the government drags its heels on new power projects. Production in Arizona and New Mexico has fallen 18% over the last four years to 34.1 million tons. With Chevron Mining's McKinley mine rapidly depleting its reserves the industry will continue to contract. In the last three years at least three large mines in the Four Corners have terminated operations. Three others remain captive operations: BHP Billiton's San Juan Underground and Navajo Surface operations and Peabody Energy's Kayenta surface mine. In 2006 the Black Mesa mine stopped producing coal. These four mines aremore » isolated from the national railways. Peabody's new El Segundo surface mine near Grants, NM is increasing production. If the planned $3 billion Desert Rock coal-fired power plant is built this will present a new market for the Navajo mine. The article gives details about the state of the aforementioned mines and of the new King II coal mine on the northern periphery of the San Juan basin and discusses the state of plans for the Desert Rock Energy Project. 5 photos.« less

75 FR 17410 - Agency Forms Undergoing Paperwork Reduction Act Review

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-06

... the practical barriers that may prevent wider adoption of NIOSH recommendations and practices designed to safeguard mine workers. In the Spring of 2007, NIOSH conducted a pretest of the survey questionnaire with nine underground coal mine operators. The pretest instrument contained 81 questions...

ASSESSING AND MANAGING MERCURY FROM HISTORIC AND CURRENT MINING ACTIVITIES

EPA Science Inventory

In order for ORD to address uncertainties resulting from past or historical mining practices a technology transfer workshop was conducted in November, 2000 in San Francisco, CA. Two primary objectives for this workshop were: 1) identify state-of-the-science practices and techniqu...

Productivity Continued to Increase in Many Industries during 1984.

ERIC Educational Resources Information Center

Herman, Arthur S.

1986-01-01

Productivity, as measured by output per employee hour, grew in 1984 in about three quarters of the industries for which the Bureau of Labor Statistics regularly publishes data. (A table shows productivity trends in industries measured by the Bureau, including mining, transportation and utilities, and trade and services.) (CT)

Emerging Careers: Occupations for Post-Industrial Society.

ERIC Educational Resources Information Center

Feingold, S. Norman

1984-01-01

The future holds in store a multitude of exciting new occupations, from treasure hunting to moon mining. Discussed are future careers in many areas, including the information industry, ocean industry, robotics, health, energy, and small business. Future occupational titles are listed and 54 ways to get a job are discussed. (RM)

Mining Company Involved in Environmental Disaster Now Advises Sustainability Institute at University of Michigan

ERIC Educational Resources Information Center

Blumenstyk, Goldie

2007-01-01

In the 1990s, the giant mining company now known as BHP Billiton drew worldwide condemnation for the environmental damage caused by its copper and gold mine in Papua, New Guinea. Its mining practices destroyed the way of life of thousands of farming and fishing families who lived along and subsisted on the rivers polluted by the mine, and it was…

Off-road truck-related accidents in U.S. mines.

PubMed

Dindarloo, Saeid R; Pollard, Jonisha P; Siami-Irdemoosa, Elnaz

2016-09-01

Off-road trucks are one of the major sources of equipment-related accidents in the U.S. mining industries. A systematic analysis of all off-road truck-related accidents, injuries, and illnesses, which are reported and published by the Mine Safety and Health Administration (MSHA), is expected to provide practical insights for identifying the accident patterns and trends in the available raw database. Therefore, appropriate safety management measures can be administered and implemented based on these accident patterns/trends. A hybrid clustering-classification methodology using K-means clustering and gene expression programming (GEP) is proposed for the analysis of severe and non-severe off-road truck-related injuries at U.S. mines. Using the GEP sub-model, a small subset of the 36 recorded attributes was found to be correlated to the severity level. Given the set of specified attributes, the clustering sub-model was able to cluster the accident records into 5 distinct groups. For instance, the first cluster contained accidents related to minerals processing mills and coal preparation plants (91%). More than two-thirds of the victims in this cluster had less than 5years of job experience. This cluster was associated with the highest percentage of severe injuries (22 severe accidents, 3.4%). Almost 50% of all accidents in this cluster occurred at stone operations. Similarly, the other four clusters were characterized to highlight important patterns that can be used to determine areas of focus for safety initiatives. The identified clusters of accidents may play a vital role in the prevention of severe injuries in mining. Further research into the cluster attributes and identified patterns will be necessary to determine how these factors can be mitigated to reduce the risk of severe injuries. Analyzing injury data using data mining techniques provides some insight into attributes that are associated with high accuracies for predicting injury severity. Copyright © 2016 Elsevier Ltd and National Safety Council. All rights reserved.

How does the mining industry contribute to sexual and reproductive health in developing countries? A narrative synthesis of current evidence to inform practice.

PubMed

Dawson, Angela J; Homer, Caroline S

2013-12-01

To explore client and provider experiences and related health outcomes of sexual and reproductive health interventions that have been led by or that have involved mining companies. Miners, and those living in communities surrounding mines in developing countries, are a vulnerable population with a high sexual and reproductive health burden. People in these communities require specific healthcare services although the exact delivery needs are unclear. There are no systematic reviews of evidence to guide delivery of sexual and reproductive health interventions to best address the needs of men and women in mining communities. A narrative synthesis. A search of peer-reviewed literature from 2000-2012 was undertaken with retrieved documents assessed using an inclusion/exclusion criterion and quality appraisal guided by critical assessment tools. Concepts were analysed thematically. A desire for HIV testing and treatment was associated with the recognition of personal vulnerability, but this was affected by fear of stigma. Regular on-site services facilitated access to voluntary counselling and testing and HIV care, but concerns for confidentiality were a serious barrier. The provision of HIV and sexually transmitted infection clinical and promotive services revealed mixed health outcomes. Recommended service improvements included rapid HIV testing, the integration of sexual and reproductive health into regular health services also available to family members and culturally competent, ethical, providers who are better supported to involve consumers in health promotion. There is a need for research to better inform health interventions so that they build on local cultural norms and values and address social needs. A holistic approach to sexual and reproductive health beyond a focus on HIV may better engage community members, mining companies and governments in healthcare delivery. Nurses may require appropriate workplace support and incentives to deliver sexual and reproductive health interventions in developing mining contexts where task shifting exists. © 2013 John Wiley & Sons Ltd.

Amelioration of iron mine soils with biosolids: Effects on plant tissue metal content and earthworms.

PubMed

Cele, Emmanuel Nkosinathi; Maboeta, Mark

2016-11-01

The achievement of environmentally sound and economically feasible disposal strategies for biosolids is a major issue in the wastewater treatment industry around the world, including Swaziland. Currently, an iron ore mine site, which is located within a wildlife sanctuary, is being considered as a suitable place where controlled disposal of biosolids may be practiced. Therefore, this study was conducted to investigate the effects of urban biosolids on iron mine soils with regard to plant metal content and ecotoxicological effects on earthworms. This was done through chemical analysis of plants grown in biosolid-amended mine soil. Earthworm behaviour, reproduction and bioaccumulation tests were also conducted on biosolid-amended mine soil. According to the results obtained, the use of biosolids led to creation of soil conditions that were generally favourable to earthworms. However, plants were found to have accumulated Zn up to 346 mg kg -1 (in shoots) and 462 mg kg -1 (in roots). This was more than double the normal Zn content of plants. It was concluded that while biosolids can be beneficial to mine soils and earthworms, they can also lead to elevated metal content in plant tissues, which might be a concern to plant-dependant wildlife species. Nonetheless, it was not possible to satisfactorily estimate risks to forage quality since animal feeding tests with hyperaccumulator plants have not been reported. Quite possibly, there may be no cause for alarm since the uptake of metals from soil is greater in plants grown in pots in the greenhouse than from the same soil in the field since pot studies fail to mimic field conditions where the soil is heterogeneous and where the root system possesses a complex topology. It was thought that further field trials might assist in arriving at more satisfactory conclusions.

High levels of activity of bats at gold mining water bodies: implications for compliance with the International Cyanide Management Code.

PubMed

Griffiths, Stephen R; Donato, David B; Coulson, Graeme; Lumsden, Linda F

2014-06-01

Wildlife and livestock are known to visit and interact with tailings dam and other wastewater impoundments at gold mines. When cyanide concentrations within these water bodies exceed a critical toxicity threshold, significant cyanide-related mortality events can occur in wildlife. Highly mobile taxa such as birds are particularly susceptible to cyanide toxicosis. Nocturnally active bats have similar access to uncovered wastewater impoundments as birds; however, cyanide toxicosis risks to bats remain ambiguous. This study investigated activity of bats in the airspace above two water bodies at an Australian gold mine, to assess the extent to which bats use these water bodies and hence are at potential risk of exposure to cyanide. Bat activity was present on most nights sampled during the 16-month survey period, although it was highly variable across nights and months. Therefore, despite the artificial nature of wastewater impoundments at gold mines, these structures present attractive habitats to bats. As tailings slurry and supernatant pooling within the tailings dam were consistently well below the industry protective concentration limit of 50 mg/L weak acid dissociable (WAD) cyanide, wastewater solutions stored within the tailings dam posed a minimal risk of cyanide toxicosis for wildlife, including bats. This study showed that passively recorded bat echolocation call data provides evidence of the presence and relative activity of bats above water bodies at mine sites. Furthermore, echolocation buzz calls recorded in the airspace directly above water provide indirect evidence of foraging and/or drinking. Both echolocation monitoring and systematic sampling of cyanide concentration in open wastewater impoundments can be incorporated into a gold mine risk-assessment model in order to evaluate the risk of bat exposure to cyanide. In relation to risk minimisation management practices, the most effective mechanism for preventing cyanide toxicosis to wildlife, including bats, is capping the concentration of cyanide in tailings discharged to open impoundments at 50 mg/L WAD.

Abandoned Mine Lands Program - Division of Mining, Land, and Water

Science.gov Websites

, safety, general welfare and property from extreme danger resulting from the adverse effects of past coal mining practices. 2. Protection of public health, safety and general welfare from adverse effects of past lands and waters and the environment previously degraded by adverse effects of past coal mining

Using Data Mining to Teach Applied Statistics and Correlation

ERIC Educational Resources Information Center

Hartnett, Jessica L.

2016-01-01

This article describes two class activities that introduce the concept of data mining and very basic data mining analyses. Assessment data suggest that students learned some of the conceptual basics of data mining, understood some of the ethical concerns related to the practice, and were able to perform correlations via the Statistical Package for…

43 CFR 3809.5 - How does BLM define certain terms used in this subpart?

Code of Federal Regulations, 2011 CFR

2011-10-01

... (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINING CLAIMS... may determine that it is practical to avoid or eliminate particular impacts. Mining claim means any unpatented mining claim, millsite, or tunnel site located under the mining laws. The term also applies to...

43 CFR 3809.5 - How does BLM define certain terms used in this subpart?

Code of Federal Regulations, 2012 CFR

2012-10-01

... (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINING CLAIMS... may determine that it is practical to avoid or eliminate particular impacts. Mining claim means any unpatented mining claim, millsite, or tunnel site located under the mining laws. The term also applies to...

43 CFR 3809.5 - How does BLM define certain terms used in this subpart?

Code of Federal Regulations, 2013 CFR

2013-10-01

... (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINING CLAIMS... may determine that it is practical to avoid or eliminate particular impacts. Mining claim means any unpatented mining claim, millsite, or tunnel site located under the mining laws. The term also applies to...

43 CFR 3809.5 - How does BLM define certain terms used in this subpart?

Code of Federal Regulations, 2014 CFR

2014-10-01

... (Continued) BUREAU OF LAND MANAGEMENT, DEPARTMENT OF THE INTERIOR MINERALS MANAGEMENT (3000) MINING CLAIMS... may determine that it is practical to avoid or eliminate particular impacts. Mining claim means any unpatented mining claim, millsite, or tunnel site located under the mining laws. The term also applies to...

A geographical information system-based analysis of cancer mortality and population exposure to coal mining activities in West Virginia, United States of America.

PubMed

Hendryx, Michael; Fedorko, Evan; Anesetti-Rothermel, Andrew

2010-05-01

Cancer incidence and mortality rates are high in West Virginia compared to the rest of the United States of America. Previous research has suggested that exposure to activities of the coal mining industry may contribute to elevated cancer mortality, although exposure measures have been limited. This study tests alternative specifications of exposure to mining activity to determine whether a measure based on location of mines, processing plants, coal slurry impoundments and underground slurry injection sites relative to population levels is superior to a previously-reported measure of exposure based on tons mined at the county level, in the prediction of age-adjusted cancer mortality rates. To this end, we utilize two geographical information system (GIS) techniques--exploratory spatial data analysis and inverse distance mapping--to construct new statistical analyses. Total, respiratory and "other" age-adjusted cancer mortality rates in West Virginia were found to be more highly associated with the GIS-exposure measure than the tonnage measure, before and after statistical control for smoking rates. The superior performance of the GIS measure, based on where people in the state live relative to mining activity, suggests that activities of the industry contribute to cancer mortality. Further confirmation of observed phenomena is necessary with person-level studies, but the results add to the body of evidence that coal mining poses environmental risks to population health in West Virginia.

Risk factors for mercury exposure of children in a rural mining town in northern Chile.

PubMed

Ohlander, Johan; Huber, Stella Maria; Schomaker, Michael; Heumann, Christian; Schierl, Rudolf; Michalke, Bernhard; Jenni, Oskar G; Caflisch, Jon; Muñoz, Daniel Moraga; von Ehrenstein, Ondine S; Radon, Katja

2013-01-01

Traditional gold mining is associated with mercury exposure. Especially vulnerable to its neurotoxic effects is the developing nervous system of a child. We aimed to investigate risk factors of mercury exposure among children in a rural mining town in Chile. Using a validated questionnaire distributed to the parents of the children, a priori mercury risk factors, potential exposure pathways and demographics of the children were obtained. Mercury levels were measured through analyzing fingernail samples. Logistic regression modeling the effect of risk factors on mercury levels above the 75(th) percentile were made, adjusted for potential confounders. The 288 children had a mean age of 9.6 years (SD = 1.9). The mean mercury level in the study population was 0.13 µg/g (SD 0.11, median 0.10, range 0.001-0.86 µg/g). The strongest risk factor for children's odds of high mercury levels (>75(th) percentile, 0.165 µg/g) was to play inside a house where a family member worked with mercury (OR adjusted 3.49 95% CI 1.23-9.89). Additionally, children whose parents worked in industrial gold mining had higher odds of high mercury levels than children whose parents worked in industrial copper mining or outside mining activities. Mercury exposure through small-scale gold mining might affect children in their home environments. These results may further help to convince the local population of banning mercury burning inside the households.

Field Assessment of Enclosed Cab Filtration System Performance Using Particle Counting Measurements

PubMed Central

Organiscak, John A.; Cecala, Andrew B.; Noll, James D.

2015-01-01

Enclosed cab filtration systems are typically used on mobile mining equipment to reduce miners’ exposure to airborne dust generated during mining operations. The National Institute for Occupational Safety and Health (NIOSH) Office of Mine Safety and Health Research (OMSHR) has recently worked with a mining equipment manufacturer to examine a new cab filtration system design for underground industrial minerals equipment. This cab filtration system uses a combination of three particulate filters to reduce equipment operators’ exposure to dust and diesel particulates present in underground industrial mineral mines. NIOSH initially examined this cab filtration system using a two-instrument particle counting method at the equipment company’s manufacturing shop facility to assess several alternative filters. This cab filtration system design was further studied on several pieces of equipment during a two- to seven-month period at two underground limestone mines. The two-instrument particle counting method was used outside the underground mine at the end of the production shifts to regularly test the cabs’ long-term protection factor performance with particulates present in the ambient air. This particle counting method showed that three of the four cabs achieved protection factors greater than 1,000 during the field studies. The fourth cab did not perform at this level because it had a damaged filter in the system. The particle counting measurements of submicron particles present in the ambient air were shown to be a timely and useful quantification method in assessing cab performance during these field studies. PMID:23915268

Exploring virtual mental practice in maintenance task training

PubMed Central

Bauerle, Tim; Brnich, Michael J.; Navoyski, Jason

2016-01-01

Purpose – This paper aims to contribute to a general understanding of mental practice by investigating the utility of and participant reaction to a virtual reality maintenance training among underground coal mine first responders. Design/methodology/approach – Researchers at the National Institute for Occupational Safety and Health's Office of Mine Safety and Health Research (OMSHR) developed software to provide opportunities for mine rescue team members to learn to inspect, assemble and test their closed-circuit breathing apparatus and to practice those skills. In total, 31 mine rescue team members utilized OMSHR's BG 4 Benching Trainer software and provided feedback to the development team. After training, participants completed a brief post-training questionnaire, which included demographics, perceived training climate and general training evaluation items. Findings – The results overall indicate a generally positive reaction to and high perceived utility of the BG 4 benching software. In addition, the perceived training climate appears to have an effect on the perceived utility of the mental practice virtual reality game, with benchmen from mines with more positive training climates reporting greater perceived efficacy in the training's ability to prepare trainees for real emergencies. Originality/value – This paper helps to broaden current applications of mental practice and is one of the few empirical investigations into a non-rehabilitation virtual reality extension of mental practice. This paper also contributes to the growing literature advocating for greater usage of accurate and well-informed mental practice techniques, tools and methodologies, especially for occupational populations with limitations on exposure to hands-on training. PMID:27594801

Overview of bureau research directed towards surface powered haulage safety

DOE Office of Scientific and Technical Information (OSTI.GOV)

May, J.P.; Aldinger, J.A.

1995-12-31

Surface mining operations, including mills and preparation plants, employ over 260,000 people. This represents a significant contribution to our nation`s economy and an important source of skilled and well-paying jobs. As mine production has shifted from underground to surface, and with continuing advances in underground mine safety, surface mining has unfortunately become the leader in mine fatalities. In 1994 surface mining accidents accounted for 49% of all mine fatalities, followed by underground mining with 37% and mills and preparation plants with 14%. The U.S. Bureau of Mines (USBM) has targeted surface mining as an important research priority to reduce themore » social and economic costs associated with fatalities and lost-work-time injuries. USBM safety research focuses on the development of technologies that can enhance productivity and reduce mining costs through a reduction in the number and severity of mining accidents. This report summarizes a number of completed and ongoing research programs directed towards surface powered haulage--the single largest category of fatalities in surface mining and a major cause of lost workdays. Research products designed for industry are highlighted and future USBM surface mining safety research is discussed.« less

77 FR 38322 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Training...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-06-27

... Department of Labor (DOL) is submitting the Mine Safety and Health Administration sponsored information... significant safety regulations affecting this industry sector. Training informs miners of safety and health... production demands; and increased demand for contractors who may be less familiar with the dangers on mine...

76 FR 70520 - RMD Technologies, Inc., Rockwall Holdings, Inc., Southmark Corp., Stargold Mines, Inc., Stelax...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-11-14

... SECURITIES AND EXCHANGE COMMISSION [File No. 500-1] RMD Technologies, Inc., Rockwall Holdings, Inc., Southmark Corp., Stargold Mines, Inc., Stelax Industries, Ltd., Stem Cell Innovations, Inc., and Surfect... there is a lack of current and accurate information concerning the securities of Stem Cell Innovations...

76 FR 27355 - Agency Information Collection Activities; Submission for OMB Review; Comment Request; Mine...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-05-11

... could not be done effectively using historical data. The information collected under part 50 is the most comprehensive and reliable occupational data available concerning the mining industry. This submission has been... miners. Accident, injury, and illness data, when correlated with employment and production data, provide...

A comprehensive assessment of exposures to respirable dust and silica in the taconite mining industry.

PubMed

Hwang, Jooyeon; Ramachandran, Gurumurthy; Raynor, Peter C; Alexander, Bruce H; Mandel, Jeffrey H

2017-05-01

This study assessed the present-day levels (year 2010-2011) of exposure to respirable dust (RD) and respirable silica (RS) in taconite mines and evaluated how the mining process influences exposure concentrations. Personal samples (n = 679) were collected to assess exposure levels of workers to RD and RS at six mines in the Mesabi Iron Range of Minnesota. The RD and RS concentrations were measured using the National Institute for Occupational Safety and Health (NIOSH) 0600 and NIOSH 7500, respectively. Between-mine, between-SEG (similar exposure groups), within-SEG, and within-worker components of variability for RD and RS exposures were estimated using a two- or three-way nested random-effects ANOVA model. The majority of RD concentrations across all mines were below the Mine Safety and Health Administration (MSHA) Permissible Exposure Limit (PEL). The highest concentrations of RD were often observed in either the Pelletizing or Crushing departments, which are inherently dusty operations. With a few exceptions, the concentrations of RS in the crushing and concentrating processes were higher than those in the other mining processes, as well as higher than the American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV) for RS. The magnetic separation and flotation processes in the concentrating department reduced the levels of RS significantly, and lowered the percentage of quartz in RD in the pelletizing department. There was little variability among the six mines or between the two mineralogically distinct zones for either RD or RS exposures. The between-SEG variability for RS did not differ substantially across most of the mines and was a major component of exposure variance. The within-SEG (or between-worker) variance component was typically the smallest because in many instances one worker from a SEG within a mine was monitored multiple times. Some of these findings were affected by the degree of censoring in each SEG and mine, characteristics of the taconite rock, seasonal effects during sampling, or the tasks assigned to each job in that mine.

Coal mining, social injustice and health: a universal conflict of power and priorities.

PubMed

Morrice, Emily; Colagiuri, Ruth

2013-01-01

Given the current insatiable demand for coal to build and fuel the world's burgeoning cities the debate about mining-related social, environmental and health injustices remains eminently salient. Furthermore, the core issues appear universally consistent. This paper combines the theoretical base for defining these injustices with reports in the international health literature about the impact of coal mining on local communities. It explores and analyses mechanisms of coal mining related injustice, conflicting priorities and power asymmetries between political and industry interests versus inhabitants of mining communities, and asks what would be required for considerations of health to take precedence over wealth. Copyright © 2012 Elsevier Ltd. All rights reserved.

278. Photocopied July 1978. NOTICE TO MINE EMPLOYEES, CITIZENS AND ...

Library of Congress Historic Buildings Survey, Historic Engineering Record, Historic Landscapes Survey

278. Photocopied July 1978. NOTICE TO MINE EMPLOYEES, CITIZENS AND NON-CITIZENS, ADVISING THEM OF ACCEPTABLE BEHAVIOR AND PROPER SHOP PRACTICES DURING WARTIME. WRITTEN IN SIX LANGUAGES. C. 1918. - Quincy Mining Company, Hancock, Houghton County, MI

Mineral Carbonation Feasibility, an Economic Approach.

NASA Astrophysics Data System (ADS)

Pasquier, L. C.; Kemache, N.; Cecchi, E.; Mercier, G.; Blais, J. F.; Kentish, S.

2016-12-01

Mineral Carbonation (MC) is one of the ways proposed to mitigate Carbon dioxide (CO2) emissions. Although it intends to transform CO2 into a stable and inert carbonate by reacting it with any divalent containing material, MC is still globally seen as an unrealistic methodology to reduce CO2, mostly because carbonation was seen as a sequestration technique only (after CO2 capture). Nevertheless, recent studies considered and showed the feasibility of an integrated capture/storage approach. Thus, MC can be adapted to flue gas or other industrial gas streams more or less concentrated in CO2. Furthermore, carbonation can be applied to various problematics and offers the advantage to be feasible with a broad range of feedstock such as alkaline industrial or mining residues. Using an economic approach where by-product valorization is favored, interesting approaches were identified. More specifically, the particular case of the Québec province shows that different synergies between wastes and industries can be elaborated. The results indicate that MC can be seen as a practical approach to both reduce CO2 emissions and enhance waste remediation. For instance, the feasibility to export significant amounts of serpentinite mining residue to distant industrial sites using the St Lawrence maritime route was demonstrated. Here the applicability stands on the high value of the generated by-products. On the other hand, steel slags or waste concrete need more local applications due to their limited reaction efficiencies and the lower price of calcium carbonates. While transportation is a major factor for the OPEX cost, the profitability relies on the by-products potential sale. Indeed, the production of low carbon footprint materials from the reaction product will also expand the offer of CO2 utilization avenues. The presentation highlights the results of research made in the lab and using economic modeling to draw a portrait of the opportunities and challenges identified with this regional approach that can apply to a wider range worldwide.

Use of an Annular Silicon Drift Detector (SDD) Versus a Conventional SDD Makes Phase Mapping a Practical Solution for Rare Earth Mineral Characterization.

PubMed

Teng, Chaoyi; Demers, Hendrix; Brodusch, Nicolas; Waters, Kristian; Gauvin, Raynald

2018-06-04

A number of techniques for the characterization of rare earth minerals (REM) have been developed and are widely applied in the mining industry. However, most of them are limited to a global analysis due to their low spatial resolution. In this work, phase map analyses were performed on REM with an annular silicon drift detector (aSDD) attached to a field emission scanning electron microscope. The optimal conditions for the aSDD were explored, and the high-resolution phase maps generated at a low accelerating voltage identify phases at the micron scale. In comparisons between an annular and a conventional SDD, the aSDD performed at optimized conditions, making the phase map a practical solution for choosing an appropriate grinding size, judging the efficiency of different separation processes, and optimizing a REM beneficiation flowsheet.

Crosscutting Technology Development at the Center for Advanced Separation Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Christopher Hull

2009-10-31

The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginiamore » Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. Distribution of funds is handled via competitive solicitation of research proposals through Site Coordinators at the seven member universities. These were first reviewed and ranked by a group of technical reviewers (selected primarily from industry). Based on these reviews, and an assessment of overall program requirements, the CAST Technical Committee made an initial selection/ranking of proposals and forwarded these to the DOE/NETL Project Officer for final review and approval. The successful projects are listed by category, along with brief abstracts of their aims and objectives.« less

DOE Office of Scientific and Technical Information (OSTI.GOV)

Peters, R.H.; Clingan, M.R.; Randolph, R.F.

The U.S. Bureau of Mines has prepared the report on strategies for maintaining high job attendance among underground coal miners because high absenteeism is a threat to miners' safety and seriously hampers productivity. A substantial number of research studies on the effectiveness of various strategies for reducing absenteeism among the employees of nonmining industries have been reported in the literature. These strategies have aimed at improving job attendance through one or more of the following: improving employment procedures, overcoming problems that adversely affect one's ability to attend work, and increasing miners' motivation to attend work. Many of these strategies appearmore » applicable to the mining industry and are reviewed in the first half of the report. The second half of the report describes how one could develop and implement a program for maintaining high attendance at underground coal mines.« less

Large Omnivore Movements in Response to Surface Mining and Mine Reclamation.

PubMed

Cristescu, Bogdan; Stenhouse, Gordon B; Boyce, Mark S

2016-01-11

Increasing global demands have resulted in widespread proliferation of resource extraction. Scientists are challenged to develop environmental mitigation strategies that meet societal expectations of resource supply, while achieving minimal disruption to sensitive "wilderness" species. We used GPS collar data from a 9-year study on grizzly bears (Ursus arctos) (n = 18) in Alberta, Canada to assess movements and associated space use during versus after mining. Grizzly bear home range overlap with mined areas was lower during active mining except for females with cubs, that also had shortest movements on active mines. However, both females with cubs and males made shorter steps when on/close to mines following mine closure and reclamation. Our results show differences in bear movement and space-use strategies, with individuals from a key population segment (females with cubs) appearing most adaptable to mining disturbance. Preserving patches of original habitat, reclaiming the landscape and minimizing the risk of direct human-induced mortality during and after development can help conserve bears and other wildlife on industrially modified landscapes.

Environmental considerations related to mining of nonfuel minerals

USGS Publications Warehouse

Seal, Robert R.; Piatak, Nadine M.; Kimball, Bryn E.; Hammarstrom, Jane M.; Schulz, Klaus J.; DeYoung,, John H.; Seal, Robert R.; Bradley, Dwight C.

2017-12-19

Throughout most of human history, environmental stewardship during mining has not been a priority partly because of the lack of applicable laws and regulations and partly because of ignorance about the effects that mining can have on the environment. In the United States, the National Environmental Policy Act of 1969, in conjunction with related laws, codified a more modern approach to mining, including the responsibility for environmental stewardship, and provided a framework for incorporating environmental protection into mine planning. Today, similar frameworks are in place in the other developed countries of the world, and international mining companies generally follow similar procedures wherever they work in the world. The regulatory guidance has fostered an international effort among all stakeholders to identify best practices for environmental stewardship.The modern approach to mining using best practices involves the following: (a) establishment of a pre-mining baseline from which to monitor environmental effects during mining and help establish geologically reasonable closure goals; (b) identification of environmental risks related to mining through standardized approaches; and (c) formulation of an environmental closure plan before the start of mining. A key aspect of identifying the environmental risks and mitigating those risks is understanding how the risks vary from one deposit type to another—a concept that forms the basis for geoenvironmental mineral-deposit models.Accompanying the quest for best practices is the goal of making mining sustainable into the future. Sustainable mine development is generally considered to be development that meets the needs of the present generation without compromising the ability of future generations to meet their own needs. The concept extends beyond the availability of nonrenewable mineral commodities and includes the environmental and social effects of mine development.Global population growth, meanwhile, has decreased the percentage of inhabitable land available to support society’s material needs. Presently, the land area available to supply the mineral resources, energy resources, water, food, shelter, and waste disposal needs of all Earth’s inhabitants is estimated to be 135 square meters per person. Continued global population growth will only increase the challenges of sustainable mining.Current trends in mining are also expected to lead to new environmental challenges in the future, among which are mine-waste management issues related to mining larger deposits for lower ore grade; water-management issues related to both the mining of larger deposits and the changes in precipitation brought about by climate change; and greenhouse gas issues related to reducing the carbon footprint of larger, more energy-intensive mining operations.

Future of small scale mining

DOE Office of Scientific and Technical Information (OSTI.GOV)

Meyer, R.F.; Carman, J.S.

1978-01-01

The first international conference on the future of small scale mining was sponsored by The United Nations Institute for Training and Research (UNITAR) and The Consejo de Recursos Minerales and Secretaria de Patrimonio y Fomento Industrial (SEPAFIN) of the Government of Mexico and held 26 November-5 December 1978, at Jurica, Queretaro, Mexico. Six papers have been entered individually into EDB. The papers mainly concern small metal mining operations and only those concerning coal, uranium, and oil shales have been entered. (LTN)

Organizational-Legal and Technological Aspects of Ensuring Environmental Safety of Mining Enterprises: Perspective Analysis in the Context of the General Enhancement of Environmental Problem

NASA Astrophysics Data System (ADS)

Vorontsova, Elena; Vorontsov, Andrey; Drozdenko, Yuriy

2017-11-01

The article is devoted to the analysis of problems of maintenance of ecological safety of the mining enterprises. The aim of the work was the formulation of proposals, the implementation of which, in the opinion of the authors, is capable of raising the level of environmental safety of the mining industry and ultimately ensuring the environmentally oriented growth of the Russian economy.

Study of application of ERTS-A imagery to fracture-related mine safety hazards in the coal mining industry

NASA Technical Reports Server (NTRS)

Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.; Leshendok, T.

1973-01-01

The author has identified the following significant results. The Kings Station Mine in Gibson County, Indiana has experienced considerable roof fall problems. Detailed fracture mapping of the mine area was done with ERTS-1 and aircraft imagery, and a prediction map of roof problem areas was produced in advance of a visit. The visit to the mine and discussions with the operator indicated that of four zones mapped as potential problem areas, three coincided with areas of excessive roof fall. This positive correlation of 75% lends confidence to the validity of the technique being applied in the investigation. The mine officials expressed an interest in the project and are anxious to see the final product maps which are forthcoming.

Mining Deployment Optimization

NASA Astrophysics Data System (ADS)

Čech, Jozef

2016-09-01

The deployment problem, researched primarily in the military sector, is emerging in some other industries, mining included. The principal decision is how to deploy some activities in space and time to achieve desired outcome while complying with certain requirements or limits. Requirements and limits are on the side constraints, while minimizing costs or maximizing some benefits are on the side of objectives. A model with application to mining of polymetallic deposit is presented. To obtain quick and immediate decision solutions for a mining engineer with experimental possibilities is the main intention of a computer-based tool. The task is to determine strategic deployment of mining activities on a deposit, meeting planned output from the mine and at the same time complying with limited reserves and haulage capacities. Priorities and benefits can be formulated by the planner.

The Gypsum: White gold of Rajasthan, introduction, uses and future prospective

NASA Astrophysics Data System (ADS)

Sharma, Gayatri

2013-06-01

Rajasthan is mineral based state and Bikaner and its surrounding district have been gifted with Gypsum. Mt of Gypsum is available in these districts. Gypsum has multiple uses including basic raw material for POP industry, addition in cement and a natural fertilizer. This mineral has changes the economic scenario in the remote areas of Bikaner, Nagaur, Hanumangarh, Sanchore, Shriganganagar etc. Gypsum and selenite are mined about 3.0 million tons per year. There is huge demand from cement industry as Gypsum is added for improving setting time of cement. Gypsum is a natural fertilizer for alkaline land and it role is vital in state like India where alkaline land is major role. Its high use as fertilizer has potential to change millions of poor farmer families and improving in crop production. Cement Industry has started importing Gypsum from Thailand, Bankong, Pakistan, Iran etc. The mining of gypsum of purity of 70% CaSO4.2H2O is cooperative effort between the land owners and Rajasthan State Mines and Minerals Limited. Gypsum fulfills the demand of POP and Cement industry in Rajasthan and powder gypsum used in agriculture for recon dining of alkaline soil. This paper deals with multiple uses, availability, and future prospective of Gypsum, a white gold of Rajasthan.

>From the benefits of micro to the threats of nano for the ore-mining and ore-refining sectors

NASA Astrophysics Data System (ADS)

van Loon, A. J.

2002-07-01

Nanotechnology is developing fast, with much impact on a wide variety of industries. It is likely that current and future developments will result in the possibility to economically manipulate materials on a nanoscale. This will bring advantages on the one hand, as a further step forward after the development of technologies on a microscale, but it may also result in developments that make several now economically important activities largely, if not entirely, superfluous. The present-day progress in the field of recycling waste, in combination with developments that may make energy available in sufficient quantities at an acceptable price level, might result in technologies that isolate valuable compounds from waste at a nanoscale, thus, taking over the role of the mining industry as a provider of raw materials. It is suggested that the mining industry becomes strongly involved in nanoscale research, in order to combine their knowledge of ore properties and extraction methods with the knowledge of nanotechnological engineers about how to manipulate individual compounds. This may provide a chance for the present-day ore-mining and ore-refining companies to survive in a world that would otherwise probably not manage to supply sufficient raw materials for the Earth's growing population, which also will strive for a rise in the average standard of living.

Towards "a different kind of beauty": responses to coal-based pollution in the Witbank coalfield between 1903 and 1948.

PubMed

Singer, Michal

2011-01-01

This article assesses the changing conceptions of the environmental impact of South African coal mining in the first half of the twentieth century, with special reference to the Witbank coalfield in the Mpumalanga province of South Africa. The anticipated development of the emerging coal town of Witbank was founded on the growing demand for coal. As Witbank's local landscape became visibly scarred, coal-based pollution was continually challenged and redefined. In an attempt to market electricity, and appease the doubts of potential consumers, attempts were made by Escom to romanticise features of Witbank's industrialised environment. Once mines were decommissioned, they were abandoned. Coal production increased dramatically during the Second World War, which provided an economic windfall for the local electrical, steel and chemical industries, placing undue pressure on the coal industry to step up production. The severe damage caused by coal mining during this period resulted in the ecological devastation of affected landscapes. The findings of an inter-departmental committee established to conduct research during the mid-1940s revealed the gravity of coal-based pollution, and set a precedent in the way that the state conceived of the impact of industry and mining. The report of this committee was completed in the wake of the war, by which time the Witbank coalfield had become one of the most heavily polluted regions of South Africa.

Integrated environmental impact assessment: a Canadian example.

PubMed Central

Kwiatkowski, Roy E.; Ooi, Maria

2003-01-01

The Canadian federal process for environmental impact assessment (EIA) integrates health, social, and environmental aspects into either a screening, comprehensive study, or a review by a public panel, depending on the expected severity of potential adverse environmental effects. In this example, a Public Review Panel considered a proposed diamond mining project in Canada's northern territories, where 50% of the population are Aboriginals. The Panel specifically instructed the project proposer to determine how to incorporate traditional knowledge into the gathering of baseline information, preparing impact prediction, and planning mitigation and monitoring. Traditional knowledge is defined as the knowledge, innovations and practices of indigenous and/or local communities developed from experience gained over the centuries and adapted to local culture and environment. The mining company was asked to consider in its EIA: health, demographics, social and cultural patterns; services and infrastructure; local, regional and territorial economy; land and resource use; employment, education and training; government; and other matters. Cooperative efforts between government, industry and the community led to a project that coordinated the concerns of all interested stakeholders and the needs of present and future generations, thereby meeting the goals of sustainable development. The mitigation measures that were implemented take into account: income and social status, social support networks, education, employment and working conditions, physical environments, personal health practices and coping skills, and health services. PMID:12894328

Business Industry Technical Assistance Center, Hazard Community College.

ERIC Educational Resources Information Center

Marrow, Alvin J.

The Business Industry and Technical Assistance Center (BITAC) was established in 1986 at Hazard Community College, in Kentucky, to serve as an information and technical assistance center for small business. As the local area began to face layoffs in the coal mining industry, however, the center extended its services in four principal areas:…

Energy-Producing Industries. Reprinted from the Occupational Outlook Handbook, 1978-79 Edition.

ERIC Educational Resources Information Center

Bureau of Labor Statistics (DOL), Washington, DC.

Focusing on occupations in energy-producing industries, this document is one in a series of forty-one reprints from the Occupational Outlook Handbook providing current information and employment projections for individual occupations and industries through 1985. The specific occupations covered in this document include coal mining, occupations in…

Mineral supply for sustainable development requires resource governance.

PubMed

Ali, Saleem H; Giurco, Damien; Arndt, Nicholas; Nickless, Edmund; Brown, Graham; Demetriades, Alecos; Durrheim, Ray; Enriquez, Maria Amélia; Kinnaird, Judith; Littleboy, Anna; Meinert, Lawrence D; Oberhänsli, Roland; Salem, Janet; Schodde, Richard; Schneider, Gabi; Vidal, Olivier; Yakovleva, Natalia

2017-03-15

Successful delivery of the United Nations sustainable development goals and implementation of the Paris Agreement requires technologies that utilize a wide range of minerals in vast quantities. Metal recycling and technological change will contribute to sustaining supply, but mining must continue and grow for the foreseeable future to ensure that such minerals remain available to industry. New links are needed between existing institutional frameworks to oversee responsible sourcing of minerals, trajectories for mineral exploration, environmental practices, and consumer awareness of the effects of consumption. Here we present, through analysis of a comprehensive set of data and demand forecasts, an interdisciplinary perspective on how best to ensure ecologically viable continuity of global mineral supply over the coming decades.

Research of cement mixtures with additions of industrial by-products

NASA Astrophysics Data System (ADS)

Papesch, R.; Klus, L.; Svoboda, J.; Zajac, R.

2017-10-01

The main goal of the article is the comparison of the possible use of secondary energy products. Used fly ashes, respectively steel dusts in cement mixes derive from production in Moravian-Silesian Region. The research focused on their influence on the chemical and physico-mechanical characteristics of the fresh and solid mixture. The aim was to find suitable formulations for grouting works, highway construction possibly rehabilitation of underground cavities created by mining activities. The introduction is mentioned the history of waste utilization up to current use as a product and the overall state of the problem. The conclusion is an evaluation of possible use in practice, including recommendations to carry out further tests.

Mineral supply for sustainable development requires resource governance

USGS Publications Warehouse

Ali, Saleem H.; Giurco, Damien; Arndt, Nicholas; Nickless, Edmund; Brown, Graham; Demetriades, Alecos; Durrheim, Ray; Enriquez, Maria Amélia; Kinnaird, Judith; Littleboy, Anna; Meinert, Lawrence D.; Oberhänsli, Roland; Salem, Janet; Schodde, Richard; Schneider, Gabi; Vidal, Olivier; Yakovleva, Natalia

2017-01-01

Successful delivery of the United Nations sustainable development goals and implementation of the Paris Agreement requires technologies that utilize a wide range of minerals in vast quantities. Metal recycling and technological change will contribute to sustaining supply, but mining must continue and grow for the foreseeable future to ensure that such minerals remain available to industry. New links are needed between existing institutional frameworks to oversee responsible sourcing of minerals, trajectories for mineral exploration, environmental practices, and consumer awareness of the effects of consumption. Here we present, through analysis of a comprehensive set of data and demand forecasts, an interdisciplinary perspective on how best to ensure ecologically viable continuity of global mineral supply over the coming decades.

Mineral supply for sustainable development requires resource governance

NASA Astrophysics Data System (ADS)

Ali, Saleem H.; Giurco, Damien; Arndt, Nicholas; Nickless, Edmund; Brown, Graham; Demetriades, Alecos; Durrheim, Ray; Enriquez, Maria Amélia; Kinnaird, Judith; Littleboy, Anna; Meinert, Lawrence D.; Oberhänsli, Roland; Salem, Janet; Schodde, Richard; Schneider, Gabi; Vidal, Olivier; Yakovleva, Natalia

2017-03-01

Successful delivery of the United Nations sustainable development goals and implementation of the Paris Agreement requires technologies that utilize a wide range of minerals in vast quantities. Metal recycling and technological change will contribute to sustaining supply, but mining must continue and grow for the foreseeable future to ensure that such minerals remain available to industry. New links are needed between existing institutional frameworks to oversee responsible sourcing of minerals, trajectories for mineral exploration, environmental practices, and consumer awareness of the effects of consumption. Here we present, through analysis of a comprehensive set of data and demand forecasts, an interdisciplinary perspective on how best to ensure ecologically viable continuity of global mineral supply over the coming decades.

Prevalence of asthma by industry and occupation in the U.S. working population.

PubMed

McHugh, Michelle K; Symanski, Elaine; Pompeii, Lisa A; Delclos, George L

2010-05-01

Workers are potentially exposed to asthmagens daily. Our study was conducted to estimate the prevalence of asthma among working adults in the U.S. by industry and occupation. Using data from the National Health and Nutrition Examination Survey (2001-2004), multiple logistic regression was used to investigate associations between industry and occupation and current asthma as defined by positive responses to "Has a doctor or other health professional ever told you that you have asthma?" and "Do you still have asthma?" Workers in mining (17.0%), health-related industries (12.5%), teaching (13.1%), or in health-related occupations (12.6%) had the highest prevalence of asthma. As compared to construction industry workers, workers in mining (aOR = 5.2, 95% CI: 1.1-24.2) or health-related (aOR = 2.3, 95% CI: 1.1-4.8) industries had significantly higher odds of asthma. Our study adds to the increasing evidence that miners, healthcare workers and teachers remain high-risk working populations and appropriate evaluation and control measures are needed to protect these workers. 2010 Wiley-Liss, Inc.

International SUSMIN-project aims at sustainable gold mining in EU

NASA Astrophysics Data System (ADS)

Backnäs, Soile; Neitola, Raisa; Turunen, Kaisa; Lima, Alexandre; Fiúza, António; Szlachta, Malgorzata; Wójtowicz, Patryk; Maftei, Raluca; Munteanu, Marian; Alakangas, Lena; Baciu, Calin; Fernández, Dámaris

2015-04-01

Although the gold demand has been constantly increasing in past years, the commodity findings have been decreasing and the extraction of gold has complicated due to increasing complexity and decreasing grade of the ores. Additionally, even gold mining could increase economical development, it has also challenges in eco-efficiency and extraction methods (e.g. cyanide). Thus, the novel energy and resource-efficient methods and technologies for mineral processing should be developed to concentrate selectively different gold bearing minerals. Furthermore, technologies for efficient treatment of mine waters, sustainable management of wastes, and methods to diminish environmental and social impacts of mining are needed. These problems will be addressed by the three year long project SUSMIN. The SUSMIN-project identifies and evaluates environmental impacts and economical challenges of gold mining within EU. The objective of the project is to increase the transnational cooperation and to support environmentally, socially and economically sustainable viable gold production. The focus is to develop and test geophysical techniques for gold exploration, eco-efficient ore beneficiation methods and alternatives for cyanide leaching. Additionally, the research will improve treatment methods for mine waters by the development and testing of advanced adsorbents. The research on socio-economic issues pursues to develop tools for enhancing the mechanisms of the corporate social responsibility as well as community engagement and management of the relations with the stakeholders. Moreover, with the environmental risk assessment and better knowledge of the geochemistry and long-term transformation of the contaminants in mining wastes and mine waters, the mining companies are able to predict and prevent the impacts to the surrounding environment, resulting in an improved environmental management solution. The SUSMIN consortium led by Geological Survey of Finland (GTK) includes seven research partners from six EU member states Finland, Sweden, Portugal, Romania, Poland and Ireland. Additionally eight globally on mining industry working industry partners will contribute in the SUSMIN consortium, so implementation of results from the project will translate into direct and significant economic benefits.

Multi-scale 46-year remote sensing change detection of diamond mining and land cover in a conflict and post-conflict setting

USGS Publications Warehouse

Dewitt, Jessica D.; Chirico, Peter G.; Bergstresser, Sarah E.; Warner, Timothy A.

2017-01-01

The town of Tortiya was created in the rural northern region of Côte d′Ivoire in the late 1940s to house workers for a new diamond mine. Nearly three decades later, the closure of the industrial-scale diamond mine in 1975 did not diminish the importance of diamond profits to the region's economy, and resulted in the growth of artisanal and small-scale diamond mining (ASM) within the abandoned industrial-scale mining concession. In the early 2000s, the violent conflict that arose in Côte d′Ivoire highlighted the importance of ASM land use to the local economy, but also brought about international concerns that diamond profits were being used to fund the rebellion. In recent years, cashew plantations have expanded exponentially in the region, diversifying economic activity, but also creating the potential for conflict between diamond mining and agricultural land uses. As the government looks to address the future of Tortiya and this potential conflict, a detailed spatio-temporal understanding of the changes in these two land uses over time may assist in informing policymaking. Remotely sensed imagery presents an objective and detailed spatial record of land use/land cover (LULC), and change detection methods can provide quantitative insight regarding regional land cover trends. However, the vastly different scales of ASM and cashew orchards present a unique challenge to comprehensive understanding of land use change in the region. In this study, moderate-scale categories of LULC, including cashew orchards, uncultivated forest, urban space, mining/ bare, and mixed vegetation, were produced through supervised classification of Landsat multispectral imagery from 1984, 1991, 2000, 2007, and 2014. The fine-scale ASM land use was identified through manual interpretation of annually acquired high resolution satellite imagery. Corona imagery was also integrated into the study to extend the temporal duration of the remote sensing record back to the period of industrial-scale mining. These different-scale analyses were then integrated to create a record of 46 years of mining activity and land cover change in Tortiya. While similar in spatial extent, the mining/ bare class in the integrated analysis exhibits a substantially different spatial distribution than in the original classifications. This additional information regarding the locations of ASM activity in the Tortiya area is important from a policy and planning perspective. The results of this study also suggest that LULC classifications of Landsat imagery do not consistently capture areas of ASM in the Côte d′Ivoire landscape.

Blasting Rocks and Blasting Cars Applied Engineering

ScienceCinema

LBNL

2017-12-09

June 30, 2004 Berkeley Lab lecture: Deb Hopkins works with industries like automobile, mining and paper to improve their evaluation and measuring techniques. For several years, she has coordinated ... June 30, 2004 Berkeley Lab lecture: Deb Hopkins works with industries like automobile, mining and paper to improve their evaluation and measuring techniques. For several years, she has coordinated a program at Berkeley Lab funded under the Partnership for a New Generation of Vehicles, a collaboration between the federal government and the U.S. Council for Automotive Research. Nondestructive evaluation techniques to test a car's structural integrity are being developed for auto assembly lines.

Evaluation of water resources around Barapukuria coal mine industrial area, Dinajpur, Bangladesh

NASA Astrophysics Data System (ADS)

Howladar, M. Farhad; Deb, Pulok Kanti; Muzemder, A. T. M. Shahidul Huqe; Ahmed, Mushfique

2014-09-01

Water is a very important natural resource which can be utilized in renewable or non-renewable forms but before utilizing, the evaluation of the quality of this resource is crucial for a particular use. However, the problems of water quality are more severe in areas where the mining and mineral processes' industries are present. In mining processes, several classes of wastes are produced which may turn into ultimately the sources of water quality and environmental degradation. In consequences, the evaluations of water quality for livestock, drinking, irrigation purposes and environmental implications have been carried out around the Barapukuria Coal Mining Industry under different methods and techniques such as primarily the field investigation; secondly the laboratory chemical analysis and thirdly justified the suitability of the laboratory analysis with statistical representation and correlation matrix, Schoeller plot, Piper's Trilinear diagram, Expanded Durov diagram, Wilcox diagram, US salinity diagram, Doneen's chart and others. The results of all surface and ground water samples analysis show that the characteristics and concentrations of all the major physical and chemical parameters such as pH, EC, TDS, Na+, K+, Ca2+, Mg2+, Fetotal, Cl-, HCO3 -, CO3 2- and SO4 2- are varied from one sample to other but well analogous with the WHO and EQS standard limit for all purposes in the area where the abundance of the major ions is as follows: Ca2+ > Na+ > Mg2+ > K+ > Fetotal = HCO3 - > SO4 2- > Cl- > CO3 2-. The graphical exposition of analytical data demonstrates two major hydrochemical facies for example: calcium-bicarbonate (Ca2+- HCO3 -) and magnesium-bicarbonate (Mg2+- HCO3 -) type facies which directly support the shallow recently recharged alkaline water around the industry. The calculated values for the evaluation classification of water based on TDS, Na%, EC, SAR, PI, RSC, MH, and TH replicate good to excellent use of water for livestock, drinking and irrigation activities except in some cases. For example, the high hardness in both water samples specifies the active hydraulic relation between surface and groundwater. Moreover, the statistical application and interpretation exhibit a good positive correlation among most of the water constituents which might be the indicator of having tightly grouped, precise homogeneous good-quality water resources around the mining industry. Finally from the environmental degradation point of view, it can be implied that there are no significant parameters or factors observed which are much badly effective on environment except very few cases. Thus, this research strongly recommends for monitoring the water quality in every 6 months or annually around this industry which might be positive for keeping the safe environment and healthy production of the coal mine.

The role of coal in the economy of the Czech Republic

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doruska, J.

1995-12-01

The Czech Republic ranks among the countries with high total reserves of hard coal and lignite. Therefore coal always had and still has a significant role in covering the power demand of the Czech Republic. Transition of the national economy, based on the principles of the market economy and private ownership, affects among others also behavior of the mining companies. A strong emphasis is also aimed at the environmental aspects concerning both the process of coal mining and the process of its utilization. Within these intentions the power policy of the Czech Republic is formulated. The Czech Republic, which hasmore » 10 mil. inhabitants, ranks among the countries with a high share of industry in the process of creating the gross national product. This state has its historical roots as on the present territory of the Czech Republic there had been concentrated a majority of industrial and mining capacities of the Hapsburg Empire. The First World War resulted among others in the decline of the Hapsburg Empire. Within this process Czechoslovak Republic was established (apart from other things the center of democracy in the Central Europe). In that republic the industry had an important position. The industrial potential had been expanded even during the occupation of Czechoslovakia by Nazi Germany in the years 1939 - 1945. After the Second World War when Europe was divided into two political spheres Czechoslovakia became a significant industrial base of so called East Bloc. Such a development and the needs of the Eastern Bloc resulted in the intensive development of the heavy industry on the territory of Czechoslovakia.« less

2006 SME annual meeting & 7th ICARD, March 26-29, 2006, St. Louis, Missouri. Pre-prints

DOE Office of Scientific and Technical Information (OSTI.GOV)

NONE

2006-07-01

Subjects covered by the papers include: enhanced coalbed methane through carbon sequestration, application of laser surface coatings for raw coal screen wear resistance enhancement, application of cross-flow teeter-bed separator in the US coal industry, arsenic removal from drinking water, modelling of fire spread along combustibles in a mine entry, coal's role in sustaining society, real time characterisation of frother bubble thin films, diesel emissions, overcoming stress measurements form underground coal amines, dry jigging coal, estimation of roof strata strength, improving screen bowl centrifuge performance, installation of ventilation shaft at a New Mexico coal mine, evaluation of feasibility of CO{sub 2}more » sequestration in deep coal, robot-human control interaction in mining operations, small mine and contractor safety, coal dust explosibility meter, US coal mine fatalities versus age of mine, and water and slurry bulkheads in underground coal mines.« less

Implementation of Paste Backfill Mining Technology in Chinese Coal Mines

PubMed Central

Chang, Qingliang; Zhou, Huaqiang; Bai, Jianbiao

2014-01-01

Implementation of clean mining technology at coal mines is crucial to protect the environment and maintain balance among energy resources, consumption, and ecology. After reviewing present coal clean mining technology, we introduce the technology principles and technological process of paste backfill mining in coal mines and discuss the components and features of backfill materials, the constitution of the backfill system, and the backfill process. Specific implementation of this technology and its application are analyzed for paste backfill mining in Daizhuang Coal Mine; a practical implementation shows that paste backfill mining can improve the safety and excavation rate of coal mining, which can effectively resolve surface subsidence problems caused by underground mining activities, by utilizing solid waste such as coal gangues as a resource. Therefore, paste backfill mining is an effective clean coal mining technology, which has widespread application. PMID:25258737

Implementation of paste backfill mining technology in Chinese coal mines.

PubMed

Chang, Qingliang; Chen, Jianhang; Zhou, Huaqiang; Bai, Jianbiao

2014-01-01

Implementation of clean mining technology at coal mines is crucial to protect the environment and maintain balance among energy resources, consumption, and ecology. After reviewing present coal clean mining technology, we introduce the technology principles and technological process of paste backfill mining in coal mines and discuss the components and features of backfill materials, the constitution of the backfill system, and the backfill process. Specific implementation of this technology and its application are analyzed for paste backfill mining in Daizhuang Coal Mine; a practical implementation shows that paste backfill mining can improve the safety and excavation rate of coal mining, which can effectively resolve surface subsidence problems caused by underground mining activities, by utilizing solid waste such as coal gangues as a resource. Therefore, paste backfill mining is an effective clean coal mining technology, which has widespread application.

A Profile of Tax Subsidies and Investment Behavior in Six Major Polluting Industries (1997)

EPA Pesticide Factsheets

Reviews investment trends in pollution control technology to determine existing patterns and to highlight the likely investment incentives that six industries, metals mining, petroleum, primary metals, pulp and paper, chemicals, and electric utilities.

GHGRP Responses to Comments on EPA–HQ–OAR–2008–0508

EPA Pesticide Factsheets

Responses to comments received on EPA–HQ–OAR–2008–0508, adding the following subparts to 40 CFR Part 98: T (Magnesium Production), FF (Underground Coal Mines), II (Industrial Wastewater Treatment), and TT (Industrial Waste Landfills).

The Role of Human Expertise in Enhancing Data Mining

ERIC Educational Resources Information Center

Kaddouri, Abdelaaziz

2011-01-01

Current data mining (DM) technology is not domain-specific and therefore rarely generates reliable, business actionable knowledge that can be used to improve the effectiveness of the decision-making process in the banking industry. DM is mainly an autonomous, data-driven process with little focus on domain expertise, constraints, or requirements…

Mining Aboriginal Labour: Examining Capital Reconversion Strategies Occurring on the Risk Management Field

ERIC Educational Resources Information Center

Hodgkins, Andrew P.

2016-01-01

This article examines a vocational education and training partnership occurring in the Canadian oil sands mining industry. The case study involves a corporate-sponsored pre-apprenticeship training programme designed to procure aboriginal labour in the province of Alberta. Interviews with members of key partner groups and stakeholders occurred…

Mercury pollution in Asia: a review of the contaminated sites.

PubMed

Li, P; Feng, X B; Qiu, G L; Shang, L H; Li, Z G

2009-09-15

This article describes the mercury contaminated sites in Asia. Among the various regions, Asia has become the largest contributor of anthropogenic atmospheric mercury (Hg), responsible for over half of the global emission. Based on different emission source categories, the mercury contaminated sites in Asia were divided into various types, such as Hg pollution from Hg mining, gold mining, chemical industry, metal smelting, coal combustion, metropolitan cities, natural resources and agricultural sources. By the review of a large number of studies, serious Hg pollutions to the local environment were found in the area influenced by chemical industry, mercury mining and gold mining. With the probable effects of a unique combination of climatic (e.g. subtropical climate), environmental (e.g. acid rain), economic (e.g. swift growth) and social factors (e.g. high population density), more effort is still needed to understand the biogeochemistry cycle of Hg and associated health effects in Asia. Safer alternatives and cleaner technologies must be developed and effectively implemented to reduce mercury emission; remedial techniques are also required to restore the historical mercury pollution in Asia.

The only thing to fear is fear itself

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sanda, A.P.

1999-07-01

The author describes his background in the gas and coal industries and in journalism, then goes on to describe what is happening in the coal industry today in terms of public opinion of the industry and who are shaping that opinion. He also discusses the education and training of coal miners and mining engineers. The author sees consolidation as a significant trend in the coal industry today.

The availability of second generation feedstocks for the treatment of acid mine drainage and to improve South Africa's bio-based economy.

PubMed

Westensee, Dirk Karl; Rumbold, Karl; Harding, Kevin G; Sheridan, Craig M; van Dyk, Lizelle D; Simate, Geoffrey S; Postma, Ferdinand

2018-10-01

South Africa has a wide range of mining activities making mineral resources important economic commodities. However, the industry is responsible for several environmental impacts; one of which is acid mine drainage (AMD). Despite several years of research, attempts to prevent AMD generation have proven to be difficult. Therefore, treatment of the resulting drainage has been common practice over the years. One of the recommended treatment methods is the use of second generation feedstocks (lignocellulosic biomass). This biomass is also acknowledged to be an important feedstock for bio-refineries as it is abundant, has a high carbon content and is available at minimal cost. It can also potentially be converted to fermentable sugars (e.g. glucose) through different treatment steps, which could further yield other valuable commodities (cellulase, poly-β-hydroxybutyric acid (PHB) and penicillin V). It is estimated by a generic flowsheet model that 7 tons of grass biomass can produce 1400 kg of glucose which can subsequently produce 205 kg, 438 kg and 270 kg of cellulase, PHB and Penicillin V, respectively. In this paper we investigate the feasibility of grass as feedstock for AMD treatment and the subsequent conversion of this acid pre-treated grass into valuable bio-products. Copyright © 2018 Elsevier B.V. All rights reserved.

Technospheric Mining of Rare Earth Elements from Bauxite Residue (Red Mud): Process Optimization, Kinetic Investigation, and Microwave Pretreatment.

PubMed

Reid, Sable; Tam, Jason; Yang, Mingfan; Azimi, Gisele

2017-11-10

Some rare earth elements (REEs) are classified under critical materials, i.e., essential in use and subject to supply risk, due to their increasing demand, monopolistic supply, and environmentally unsustainable and expensive mining practices. To tackle the REE supply challenge, new initiatives have been started focusing on their extraction from alternative secondary resources. This study puts the emphasis on technospheric mining of REEs from bauxite residue (red mud) produced by the aluminum industry. Characterization results showed the bauxite residue sample contains about 0.03 wt% REEs. Systematic leaching experiments showed that concentrated HNO 3 is the most effective lixiviant. However, because of the process complexities, H 2 SO 4 was selected as the lixiviant. To further enhance the leaching efficiency, a novel process based on microwave pretreatment was employed. Results indicated that microwave pretreatment creates cracks and pores in the particles, enabling the lixiviant to diffuse further into the particles, bringing more REEs into solution, yielding of 64.2% and 78.7% for Sc and Nd, respectively, which are higher than the maximum obtained when HNO 3 was used. This novel process of "H 2 SO 4 leaching-coupled with-microwave pretreatment" proves to be a promising technique that can help realize the technological potential of REE recovery from secondary resources, particularly bauxite residue.

Assessment of Local Biodiversity Loss in Uranium Mining-Tales And Its Projections On Global Scale

NASA Astrophysics Data System (ADS)

Sharshenova, D.; Zhamangulova, N.

2015-12-01

In Min-Kush, northern Kyrgyzstan there are 8 mining tales with an estimate of 1 961 000 tones of industrial Uranium. Local ecosystem services have declined rapidly. We analyzed a terrestrial assemblage database of Uranium mine-tale to quantify local biodiversity responses to land use and environmental changes. In the worst-affected habitats species richness reduced by 95.7%, total abundance by 60.9% and rarefaction-based richness by 72.5%. We estimate that, regional mountain ecosystem affected by this pressure reduced average within-sample richness (by 17.01%), total abundance (16.5%) and rarefaction-based richness (14.5%). Business-as-usual scenarios are the widely practiced in the region and moreover, due to economic constraints country can not afford any mitigation scenarios. We project that biodiversity loss and ecosystem service impairment will spread in the region through ground water, soil, plants, animals and microorganisms at the rate of 1km/year. Entire Tian-Shan mountain chain will be in danger within next 5-10 years. Our preliminary data shows that local people live in this area developed various forms of cancer, and the rate of premature death is as high as 40%. Strong international scientific and socio-economic partnership is needed to develop models and predictions.

A New Tool for Industry

NASA Technical Reports Server (NTRS)

1981-01-01

Ultrasonic P2L2 bolt monitor is a new industrial tool, developed at Langley Research Laboratory, which is lightweight, portable, extremely accurate because it is not subject to friction error, and it is cost-competitive with the least expensive of other types of accurate strain monitors. P2L2 is an acronym for Pulse Phase Locked Loop. The ultrasound system which measures the stress that occurs when a bolt becomes elongated in the process of tightening, transmits sound waves to the bolt being fastened and receives a return signal indicating changes in bolt stress. Results are translated into a digital reading of the actual stress on the bolt. Device monitors the bolt tensioning process on mine roof bolts that provide increased safety within the mine. Also has utility in industrial applications.

Ambient air quality at the wider area of an industrial mining facility at Stratoni, Chalkidiki, Greece.

PubMed

Gaidajis, Georgios; Angelakoglou, Komninos; Gazea, Emmy

2012-01-01

To assess ambient air quality at the wider area of a mining-industrial facility in Chalkidiki, Greece, the particulate matter with an aerodynamic diameter of 10 μm (PM(10)) and its content in characteristic elements, i.e., As, Cd, Cu, Fe, Mn, Pb, Zn were monitored for a period of three years (2008-2010). Gravimetric air samplers were employed for the particulate matter sampling at three sampling stations located in the immediate vicinity of the industrial facility and at a neighbouring residential site. Monitoring data indicated that the 3-year median PM(10) concentrations were 23.3 μg/m(3) at the residential site close to the facility and 28.7 μg/m(3) at the site within the facility indicating a minimal influence from the industrial activities to the air quality of the neighbouring residential area. Both annual average and median PM(10) concentration levels were below the indicative European standards, whereas similar spatial and temporal variation was observed for the PM(10) constituents. The average Pb concentrations measured for the three sampling sites were 0.2, 0.146 and 0.174 μg/m(3) respectively, well below the indicative limit of 0.5 μg/m(3). The quantitative and qualitative comparison of PM(10) concentrations and its elemental constituent for the three sampling stations did not indicate any direct influence of the mining-industrial activities to the air quality of the Stratoni residential area.

ABC for AIDS prevention in Guinea: migrant gold mining communities address their risks.

PubMed

Kis, Adam Daniel

2010-04-01

Contrary to expectation when compared with other migrant mining zones of sub-Saharan Africa, the nation of Guinea has a comparatively low and stable HIV rate. In addition, the regions with the largest gold, diamond, and bauxite mining operations report the lowest HIV rates within the country. This research set out to explain practices and beliefs within gold mining communities near Siguiri, Guinea--the highest-producing gold mining zone in the country--that may contribute to this phenomenon, particularly as they relate to the Abstinence, Be faithful, use a Condom approach to AIDS prevention. Structured interviews on a randomly selected sample of 460 adults and regular visitation to 16 pharmacies and health clinics within the mining zone yielded data showing that abstinence and condom use are minimally practiced for AIDS prevention. Instead, faithfulness to partners was overwhelmingly reported as the method of choice for AIDS avoidance. In addition, this research explored ways in which local conceptions of fidelity differed from those generally understood in other contexts, including engagement in short-term marriages at the gold mining sites.

Survey of nine surface mines in North America. [Nine different mines in USA and Canada

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hayes, L.G.; Brackett, R.D.; Floyd, F.D.

This report presents the information gathered by three mining engineers in a 1980 survey of nine surface mines in the United States and Canada. The mines visited included seven coal mines, one copper mine, and one tar sands mine selected as representative of present state of the art in open pit, strip, and terrace pit mining. The purpose of the survey was to investigate mining methods, equipment requirements, operating costs, reclamation procedures and costs, and other aspects of current surface mining practices in order to acquire basic data for a study comparing conventional and terrace pit mining methods, particularly inmore » deeper overburdens. The survey was conducted as part of a project under DOE Contract No. DE-AC01-79ET10023 titled The Development of Optimal Terrace Pit Coal Mining Systems.« less

40 CFR 434.82 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2010 CFR

2010-07-01

... application of the best practicable control technology currently available (BPT). 434.82 Section 434.82... control technology currently available (BPT). Except as provided in 40 CFR 125.30 through 125.32, the following effluent limitations apply to mine drainage from applicable areas of western coal mining...

40 CFR 440.142 - Effluent limitations representing the degree of effluent reduction attainable by the application...

Code of Federal Regulations, 2011 CFR

2011-07-01

... degree of effluent reduction attainable by the application of the best practicable control technology... (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS ORE MINING AND DRESSING POINT SOURCE CATEGORY Gold Placer Mine... application of the best practicable control technology currently available (BPT). Except as provided in 40 CFR...

40 CFR 434.82 - Effluent limitations attainable by the application of the best practicable control technology...

Code of Federal Regulations, 2011 CFR

2011-07-01

... application of the best practicable control technology currently available (BPT). 434.82 Section 434.82... control technology currently available (BPT). Except as provided in 40 CFR 125.30 through 125.32, the following effluent limitations apply to mine drainage from applicable areas of western coal mining...

Building a Bridge or Digging a Pipeline? Clinical Data Mining in Evidence-Informed Knowledge Building

ERIC Educational Resources Information Center

Epstein, Irwin

2015-01-01

Challenging the "bridge metaphor" theme of this conference, this article contends that current practice-research integration strategies are more like research-to-practice "pipelines." The purpose of this article is to demonstrate the potential of clinical data-mining studies conducted by practitioners, practitioner-oriented PhD…

Physical capacity of rescue personnel in the mining industry

PubMed Central

Stewart, Ian B; McDonald, Michael D; Hunt, Andrew P; Parker, Tony W

2008-01-01

Background The mining industry has one of the highest occupational rates of serious injury and fatality. Mine staff involved with rescue operations are often required to respond to physically challenging situations. This paper describes the physical attributes of mining rescue personnel. Methods 91 rescue personnel (34 ± 8.6 yrs, 1.79 ± 0.07 m, 90 ± 15.0 kg) participating in the Queensland Mines Rescue Challenge completed a series of health-related and rescue-related fitness tasks. Health-related tasks comprised measurements of aerobic capacity (VO2max), abdominal endurance, abdominal strength, flexibility, lower back strength, leg strength, elbow flexion strength, shoulder strength, lower back endurance, and leg endurance. Rescue-related tasks comprised an incremental carry (IC), coal shovel (CS), and a hose drag (HD), completed in this order. Results Cardiovascular (VO2max) and muscular endurance was average or below average compared with the general population. Isometric strength did not decline with age. The rescue-related tasks were all extremely demanding with heart rate responses averaging greater than 88% of age predicted maximal heart rates. Heart rate recovery responses were more discriminating than heart rates recorded during the tasks, indicating the hose drag as the most physically demanding of the tasks. Conclusion Relying on actual rescues or mining related work to provide adequate training is generally insufficient to maintain, let alone increase, physical fitness. It is therefore recommended that standards of required physical fitness be developed and mines rescue personnel undergo regularly training (and assessment) in order to maintain these standards. PMID:18847510

Knowledge Exchange between Poland and Vietnam in Mining and Geology - the Status Quo and Future Development

NASA Astrophysics Data System (ADS)

Nguyen, Nga; Pham, Nguyet

2018-03-01

From the beginning of the 21st century, knowledge exchange between Poland and Vietnam in mining and geology has been focusing in technology, education and training. Since years, Polish academic and commercial partners have been developing a close collaboration with Vietnam National Coal - Mineral Industries Holding Corporation Limited. Major outcomes of the collaboration are installations and operation of mining equipments and machines in Vietnamese mining companies, and excellent training programs for graduate and post graduate students and mining staff for both countries, etc. From aspects of knowledge management in globalization, the article highlights the outstanding outcomes of knowledge exchanges between the two countries, outlines cultural and economic challenges for the exchange and proposes some improvement in the future.

Serum aluminium levels of workers in the bauxite mines.

PubMed

de Kom, J F; Dissels, H M; van der Voet, G B; de Wolff, F A

1997-01-01

Aluminium is produced from the mineral bauxite. Occupational exposure is reported during the industrial processing of aluminium and is associated with pulmonary and neurotoxicity. However, data on exposure and toxicity of workers in the open bauxite mining industry do not exist. Therefore, a study was performed to explore aluminium exposure in employees involved in this bauxite mining process in a Surinam mine. A group of workers occupationally exposed to aluminium in an open bauxite mine were compared with a group of nonexposed wood processors. Serum aluminium was analyzed using atomic absorption spectrometry Data from the clinical chemistry of the blood and a questionnaire were used to explore determinants for aluminium exposure. No significant difference between serum aluminium in the exposed (4.4 +/- 2.0 micrograms/L, n = 27) and control group (5.1 +/- 1.5 micrograms/L, n = 27) was detected. For the serum concentration of the clinical chemical variables (calcium, citrate, and creatinine), a statistically significant difference was computed (p < or = 0.02) between the exposed and control group. All levels were slightly higher in the exposed group; no statistically significant correlations with serum aluminium were found. In this study, serum aluminium values were in the normal range, no significant difference between the groups could be detected despite long-term occupational exposure.

What can 35 years and over 700,000 measurements tell us about noise exposure in the mining industry?

PubMed

Roberts, Benjamin; Sun, Kan; Neitzel, Richard L

2017-01-01

To analyse over 700,000 cross-sectional measurements from the Mine Safety and Health Administration (MHSA) and develop statistical models to predict noise exposure for a worker. Descriptive statistics were used to summarise the data. Two linear regression models were used to predict noise exposure based on MSHA-permissible exposure limit (PEL) and action level (AL), respectively. Twofold cross validation was used to compare the exposure estimates from the models to actual measurement. The mean difference and t-statistic was calculated for each job title to determine whether the model predictions were significantly different from the actual data. Measurements were acquired from MSHA through a Freedom of Information Act request. From 1979 to 2014, noise exposure has decreased. Measurements taken before the implementation of MSHA's revised noise regulation in 2000 were on average 4.5 dBA higher than after the law was implemented. Both models produced exposure predictions that were less than 1 dBA different than the holdout data. Overall noise levels in mines have been decreasing. However, this decrease has not been uniform across all mining sectors. The exposure predictions from the model will be useful to help predict hearing loss in workers in the mining industry.

Underground Mining Method Selection Using WPM and PROMETHEE

NASA Astrophysics Data System (ADS)

Balusa, Bhanu Chander; Singam, Jayanthu

2018-04-01

The aim of this paper is to represent the solution to the problem of selecting suitable underground mining method for the mining industry. It is achieved by using two multi-attribute decision making techniques. These two techniques are weighted product method (WPM) and preference ranking organization method for enrichment evaluation (PROMETHEE). In this paper, analytic hierarchy process is used for weight's calculation of the attributes (i.e. parameters which are used in this paper). Mining method selection depends on physical parameters, mechanical parameters, economical parameters and technical parameters. WPM and PROMETHEE techniques have the ability to consider the relationship between the parameters and mining methods. The proposed techniques give higher accuracy and faster computation capability when compared with other decision making techniques. The proposed techniques are presented to determine the effective mining method for bauxite mine. The results of these techniques are compared with methods used in the earlier research works. The results show, conventional cut and fill method is the most suitable mining method.

A techno-economic model for optimum regeneration of surface mined land

NASA Astrophysics Data System (ADS)

Mukhopadhyay, Manas K.; Sinha, Indra N.

2006-07-01

The recent global scenario in the mineral sector may be characterized by rising competitiveness, increasing production costs and a slump in market price. This has pushed the mineral sector in general and that in the developing countries in particular to a situation where the industry has a limited capacity to sustain unproductive costs. This, more often than not, results in a situation where the industry fails to ensure environmental safeguards during and after mineral extraction. The situation is conspicuous in the Indian coal mining industry where more than 73% production comes from surface operations. India has an ambitious power augmentation projection for the coming 10 years. A phenomenal increase in coal production is proposed from the power grade coalfields in India. One of the most likely fall-outs of land degradation due to mining in these areas would be significant reduction of agricultural and other important land-uses. Currently, backfilling costs are perceived as prohibitive and abandonment of land is the easy way out. This study attempts to provide mine planners with a mathematical model that distributes generated overburden at defined disposal options while ensuring maximization of backfilled land area at minimum direct and economic costs. Optimization has been accomplished by linear programming (LP) for optimum distribution of each year’s generated overburden. Previous year’s disposal quantity outputs are processed as one set of the inputs to the LP model for generation of current year’s disposal output. From various geo-mining inputs, site constants of the LP constraints are calculated. Arrived value of economic vectors, which guide the programming statement, decides the optimal overburden distribution in defined options. The case example (with model test run) indicates that overburden distribution is significantly sensitive to coal seam gradient. The model has universal applicability to cyclic system (shovel dumper combination) of opencast mining of stratified deposits.

MERCURY CONTRIBUTIONS TO THE ENVIRONMENT FROM HISTORIC MINING PRACTICES

EPA Science Inventory

Significant quantities of mercury have been released to the environment as a result of historic precious metal mining. Many gold and silver deposits are enriched in mercury, which is released during mining and processing activities. Historically in the U.S., although a modern ...

The impact of gold mining on the Witwatersrand on the rivers and karst system of Gauteng and North West Province, South Africa

NASA Astrophysics Data System (ADS)

Durand, J. F.

2012-06-01

The Witwatersrand has been subjected to geological exploration, mining activities, parallel industrial development and associated settlement patterns over the past century. The gold mines brought with them not only development, employment and wealth, but also the most devastating war in the history of South Africa, civil unrest, economical inequality, social uprooting, pollution, negative health impacts and ecological destruction. One of the most consistent and pressing problems caused by mining has been its impact on the water bodies in and adjacent to the Witwatersrand. The dewatering and rewatering of the karstic aquifer overlying and adjacent to the Witwatersrand Supergroup and the pollution caused by Acid Mine Drainage (AMD) are some of the most serious consequences of gold mining in South Africa and will affect the lives of many South Africans.

Design risk assessment for burst-prone mines: Application in a Canadian mine

NASA Astrophysics Data System (ADS)

Cheung, David J.

A proactive stance towards improving the effectiveness and consistency of risk assessments has been adopted recently by mining companies and industry. The next 10-20 years forecasts that ore deposits accessible using shallow mining techniques will diminish. The industry continues to strive for success in "deeper" mining projects in order to keep up with the continuing demand for raw materials. Although the returns are quite profitable, many projects have been sidelined due to high uncertainty and technical risk in the mining of the mineral deposit. Several hardrock mines have faced rockbursting and seismicity problems. Within those reported, mines in countries like South Africa, Australia and Canada have documented cases of severe rockburst conditions attributed to the mining depth. Severe rockburst conditions known as "burst-prone" can be effectively managed with design. Adopting a more robust design can ameliorate the exposure of workers and equipment to adverse conditions and minimize the economic consequences, which can hinder the bottom line of an operation. This thesis presents a methodology created for assessing the design risk in burst-prone mines. The methodology includes an evaluation of relative risk ratings for scenarios with options of risk reduction through several design principles. With rockbursts being a hazard of seismic events, the methodology is based on research in the area of mining seismicity factoring in rockmass failure mechanisms, which results from a combination of mining induced stress, geological structures, rockmass properties and mining influences. The methodology was applied to case studies at Craig Mine of Xstrata Nickel in Sudbury, Ontario, which is known to contain seismically active fault zones. A customized risk assessment was created and applied to rockburst case studies, evaluating the seismic vulnerability and consequence for each case. Application of the methodology to Craig Mine demonstrates that changes in the design can reduce both exposure risk (personnel and equipment), and economical risk (revenue and costs). Fatal and catastrophic consequences can be averted through robust planning and design. Two customized approaches were developed to conduct risk assessment of case studies at Craig Mine. Firstly, the Brownfield Approach utilizes the seismic database to determine the seismic hazard from a rating system that evaluates frequency-magnitude, event size, and event-blast relation. Secondly, the Greenfield Approach utilizes the seismic database, focusing on larger magnitude events, rocktype, and geological structure. The customized Greenfield Approach can also be applied in the evaluation of design risk in deep mines with the same setting and condition as Craig Mine. Other mines with different settings and conditions can apply the principles in the methodology to evaluate design alternatives and risk reduction strategies for burst-prone mines.

The metrological assurance of quality petroleum products. Methods for determining octane and sulfur numbers in the petroleum products

NASA Astrophysics Data System (ADS)

Shalkov, A. V.; Fadeev, Y. A.

2018-01-01

At present, solving environmental problems in industrially developed regions with a large concentration of mining and machine building enterprises is one of the main socially important tasks. Taking into account the increase in the volume of mining, there is an increase in the environmental burden, which affects the internal migration of the population. This is particularly evident in the examples of single-industry towns, in which a gradual decrease in the young workable population occurs. The article presents an analysis of the sources of maximum pollution of the environment by coal mining enterprises. Modern methods of controlling automobile fuel were analyzed. The analysis of fuel quality and the environmental assessment of combustion products was carried out. The equipment used in the article makes it possible to exclude substandard fuel and to reduce harmful emissions of vehicles to the atmosphere.

Radiation exposure control from the application of nuclear gauges in the mining industry in Ghana.

PubMed

Faanu, A; Darko, E O; Awudu, A R; Schandorf, C; Emi-Reynolds, G; Yeboah, J; Glover, E T; Kattah, V K

2010-05-01

The use of nuclear gauges for process control and elemental analysis in the mining industry in Ghana, West Africa, is wide spread and on the increase in recent times. The Ghana Radiation Protection Board regulates nuclear gauges through a system of notification and authorization by registration or licensing, inspection, and enforcement. Safety assessments for authorization and enforcement have been established to ensure the safety and security of radiation sources as well as protection of workers and the general public. Appropriate training of mine staff is part of the efforts to develop the necessary awareness about the safety and security of radiation sources. The knowledge and skills acquired will ensure the required protection and safety at the workplaces. Doses received by workers monitored over a period between 1998 and 2007 are well below the annual dose limit of 20 mSv recommended by the International Commission on Radiological Protection.

Physiological strain in the Hungarian mining industry: The impact of physical and psychological factors.

PubMed

Varga, József; Nagy, Imre; Szirtes, László; Pórszász, János

2016-01-01

The objectives of these investigations completed on workplaces in the Hungarian mining industry were to characterize the physiological strain of workers by means of work pulse and to examine the effects of work-related psychological factors. Continuous heart rate (HR) recording was completed on 71 miners over a total of 794 shifts between 1987 and 1992 in mining plants of the Hungarian mining industry using a 6-channel recorder - Bioport (ZAK, Germany). The work processes were simultaneously documented by video recording along with drawing up the traditional ergonomic workday schedule. All workers passed health evaluation for fitness for work. The effects of different psychological factors (simulated danger, "instrument stress," presence of managers, and effect of prior involvement in accidents as well as different mining technologies and work place illumination) on the work pulse were evaluated. The statistical analysis was completed using SPSS software (version 13.0, SPSS Inc., USA). The work-related physiological strain differed between work places with different mining technologies in groups of 12-18 workers. The work pulse was lowest in bauxite mining (ΔHR = 22±8.9 bpm) and highest in drift drilling in dead rock with electric drilling machine (ΔHR = 30±6.9 bpm). During sham alarm situation the work pulse was significantly higher than during normal activities with the same physical task (ΔHR = 36.7±4.8 bpm vs. 25.8±1.6 bpm, p < 0.001). When work was performed under different psychological stress, the work pulse was consistently higher, while improving the work place illumination decreased the physiological strain appreciably (ΔHR (median, 25-75 percentiles) = 23, 20-26 bmp vs. 28, 25-31.3 bpm, p < 0.001). Recording the heart rate during whole-shift work along with the work conditions gives reliable results and helps isolating factors that contribute to increased strain. The results can be used to implement preventive and health promotion measures. This work is available in Open Access model and licensed under a CC BY-NC 3.0 PL license.

Employee Participation: Some Australian Cases.

ERIC Educational Resources Information Center

Lansbury, Russell D.; Davis, Edward M.

1992-01-01

The Australian Workplace Industrial Relations Survey of 2,353 companies showed sporadic employee participation in decision making. Although case studies of Ford Motor, Australia Post, Lend Lease, Telecom Australia, and Woodlawn Mining illustrate successful programs, most managers appear cautious about industrial democracy. (SK)

Study of application of ERTS-A imagery to fracture related mine safety hazards in the coal mining industry

NASA Technical Reports Server (NTRS)

Wier, C. E.; Wobber, F. J. (Principal Investigator); Russell, O. R.; Amato, R. V.

1973-01-01

The author has identified the following significant results. The 70mm black and white infrared photography acquired in March 1973 at an approximate scale of 1:115,000 permits the identification of areas of mine subsidence not readily evident on other films. This is largely due to the high contrast rendition of water and land by this film and the excessive surface moisture conditions prevalent in the area at the time of photography. Subsided areas consist of shallow depressions which have impounded water. Patterns with a regularity indicative of the room and pillar configuration used in subsurface coal mining are evident.

No immediate relief for large mining tire shortage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fiscor, S.

2006-05-15

Inventories are low and they will not get better anytime soon, but mine operators do have a few options. The three main manufacturers supplying tires to the US mining industry, Bridgestone Firestone Off Road Tire Company, Goodyear and Michelin are struggling to keep up with demand, but are unlikely to restore inventories to manageable levels by 2009. Meanwhile Yokohama and Global Tyres have stepped in to help. The article reports plans for expansions to plant in Japan. In the meantime, mine operators need to plan accordingly and pay increased attention to tire maintenance. The larger the tyre, the less availablemore » it is. 3 photos.« less

Estimation of quantitative levels of diesel exhaust exposure and the health impact in the contemporary Australian mining industry.

PubMed

Peters, Susan; de Klerk, Nicholas; Reid, Alison; Fritschi, Lin; Musk, Aw Bill; Vermeulen, Roel

2017-03-01

To estimate quantitative levels of exposure to diesel exhaust expressed by elemental carbon (EC) in the contemporary mining industry and to describe the excess risk of lung cancer that may result from those levels. EC exposure has been monitored in Western Australian miners since 2003. Mixed-effects models were used to estimate EC levels for five surface and five underground occupation groups (as a fixed effect) and specific jobs within each group (as a random effect). Further fixed effects included sampling year and duration, and mineral mined. On the basis of published risk functions, we estimated excess lifetime risk of lung cancer mortality for several employment scenarios. Personal EC measurements (n=8614) were available for 146 different jobs at 124 mine sites. The mean estimated EC exposure level for surface occupations in 2011 was 14 µg/m 3 for 12 hour shifts. Levels for underground occupation groups ranged from 18 to 44 µg/m 3 . Underground diesel loader operators had the highest exposed specific job: 59 µg/m 3 . A lifetime career (45 years) as a surface worker or underground miner, experiencing exposure levels as estimated for 2011 (14 and 44 µg/m 3 EC), was associated with 5.5 and 38 extra lung cancer deaths per 1000 males, respectively. EC exposure levels in the contemporary Australian mining industry are still substantial, particularly for underground workers. The estimated excess numbers of lung cancer deaths associated with these exposures support the need for implementation of stringent occupational exposure limits for diesel exhaust. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Recovery technologies for building materials

NASA Astrophysics Data System (ADS)

Karu, Veiko; Nurme, Martin; Valgma, Ingo

2015-04-01

Mining industry provides building materials for construction. Civil engineers have settled the quality parameters for construction materials. When we produce high quality building materials from carbonate rock (limestone, dolostone), then the estimated waste share is 25% to 30%, depending on crushing principles and rock quality. The challenge is to find suitable technology for waste recovery. During international mining waste related cooperation project MIN-NOVATION (www.min-novation.eu), partners mapped possibilities for waste recovery in mining industry and pointed out good examples and case studies. One example from Estonia showed that when we produce limestone aggregate, then we produce up to 30% waste material (fines with size 0-4mm). This waste material we can see as secondary raw material for building materials. Recovery technology for this fine grained material has been achieved with CDE separation plant. During the process the plant washes out minus 63 micron material from the limestone fines. This technology allows us to use 92% of all limestone reserves. By-product from 63 microns to 4 mm we can use as filler in concrete or as fine limestone aggregate for building or building materials. MIN-NOVATION project partners also established four pilot stations to study other mineral waste recovery technologies and solutions. Main aims on this research are to find the technology for recovery of mineral wastes and usage for new by-products from mineral mining waste. Before industrial production, testing period or case studies are needed. This research is part of the study of Sustainable and environmentally acceptable Oil shale mining No. 3.2.0501.11-0025 http://mi.ttu.ee/etp and the project B36 Extraction and processing of rock with selective methods - http://mi.ttu.ee/separation; http://mi.ttu.ee/miningwaste/

Community Economic Identity: The Coal Industry and Ideology Construction in West Virginia

ERIC Educational Resources Information Center

Bell, Shannon Elizabeth; York, Richard

2010-01-01

Economic changes and the machinations of the treadmill of production have dramatically reduced the number of jobs provided by extractive industries, such as mining and timber, in the United States and other affluent nations in the post-World War II era. As the importance of these industries to national, regional, and local economies wanes,…

Prognostics and Health Management of Wind Turbines: Current Status and Future Opportunities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sheng, Shuangwen

Prognostics and health management is not a new concept. It has been used in relatively mature industries, such as aviation and electronics, to help improve operation and maintenance (O&M) practices. In the wind industry, prognostics and health management is relatively new. The level for both wind industry applications and research and development (R&D) has increased in recent years because of its potential for reducing O&M cost of wind power, especially for turbines installed offshore. The majority of wind industry application efforts has been focused on diagnosis based on various sensing and feature extraction techniques. For R&D, activities are being conductedmore » in almost all areas of a typical prognostics and health management framework (i.e., sensing, data collection, feature extraction, diagnosis, prognosis, and maintenance scheduling). This presentation provides an overview of the current status of wind turbine prognostics and health management that focuses on drivetrain condition monitoring through vibration, oil debris, and oil condition analysis techniques. It also discusses turbine component health diagnosis through data mining and modeling based on supervisory control and data acquisition system data. Finally, it provides a brief survey of R&D activities for wind turbine prognostics and health management, along with future opportunities.« less

The Regional-Matrix Approach to the Training of Highly Qualified Personnel for the Sustainable Development of the Mining Region

NASA Astrophysics Data System (ADS)

Zhernov, Evgeny; Nehoda, Evgenia

2017-11-01

The state, regional and industry approaches to the problem of personnel training for building an innovative knowledge economy at all levels that ensures sustainable development of the region are analyzed in the article using the cases of the Kemerovo region and the coal industry. A new regional-matrix approach to the training of highly qualified personnel is proposed, which allows to link the training systems with the regional economic matrix "natural resources - cognitive resources" developed by the author. A special feature of the new approach is the consideration of objective conditions and contradictions of regional systems of personnel training, which have formed as part of economic systems of regions differ-entiated in the matrix. The methodology of the research is based on the statement about the interconnectivity of general and local knowledge, from which the understanding of the need for a combination of regional, indus-try and state approaches to personnel training is derived. A new form of representing such a combination is the proposed approach, which is based on matrix analysis. The results of the research can be implemented in the practice of modernization of professional education of workers in the coal industry of the natural resources extractive region.

Anti-icing Behavior of Thermally Sprayed Polymer Coatings

NASA Astrophysics Data System (ADS)

Koivuluoto, Heli; Stenroos, Christian; Kylmälahti, Mikko; Apostol, Marian; Kiilakoski, Jarkko; Vuoristo, Petri

2017-01-01

Surface engineering shows an increasing potential to provide a sustainable approach to icing problems. Currently, several passive anti-ice properties adoptable to coatings are known, but further research is required to proceed for practical applications. This is due to the fact that icing reduces safety, operational tempo, productivity and reliability of logistics, industry and infrastructure. An icing wind tunnel and a centrifugal ice adhesion test equipment can be used to evaluate and develop anti-icing and icephobic coatings for a potential use in various arctic environments, e.g., in wind power generation, oil drilling, mining and logistic industries. The present study deals with evaluation of icing properties of flame-sprayed polyethylene (PE)-based polymer coatings. In the laboratory-scale icing tests, thermally sprayed polymer coatings showed low ice adhesion compared with metals such as aluminum and stainless steel. The ice adhesion strength of the flame-sprayed PE coating was found to have approximately seven times lower ice adhesion values compared with metallic aluminum, indicating a very promising anti-icing behavior.

25 CFR 213.40 - Cancellations.

Code of Federal Regulations, 2010 CFR

2010-04-01

... FIVE CIVILIZED TRIBES, OKLAHOMA, FOR MINING Operations § 213.40 Cancellations. (a) When, in the opinion... or of the applicable regulations, or if mining operations are conducted wastefully and without regard to good mining practice, the Secretary of the Interior shall have the right at any time after 30 days...

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

In fiscal 1982, the mine safety record improved in several categories over the previous year, but declined in others. There were 220 mining deaths in fiscal year 1982 compared to 222 fatalities in 1981. In coal mining, there were 160 fatalities in fiscal 1982 compared with 131 the previous year. In metal and nonmetal mining in fiscal 1982, there were 60 fatalities, compared to 91 deaths recorded in fiscal 1981. In coal mining, the fatality rate, which factors in employment variations, was .07 per 200,000 employee-hours worked in fiscal 1982 compared to a .06 rate during the previous year. Inmore » metal and nonmetal mining, the fatality rate per 200,000 employee-hours was .04 in fiscal 1982 compared with .03 the previous year. In both industries, the rates of all injuries declined. On Dec. 7, 1981, an underground coal mine dust explosion took the lives of eight miners at the Adkins Coal Co,'s No. 11 mine at Kite, Knott County, KY. A day later, Dec. 8, 1981, an underground coal mine explosion killed 13 miners at Grundy Mining Co.'s No. 21 mine at Whitwell, Marion County, Tenn. During the following month, on Jan. 20, 1982, another coal mine dust explosion killed seven underground coal miners at the RFH mine in Craynor, Floyd County, KY. 7 figs., 33 tabs.« less

Pressing needs of biomedical text mining in biocuration and beyond: opportunities and challenges

PubMed Central

Singhal, Ayush; Leaman, Robert; Catlett, Natalie; Lemberger, Thomas; McEntyre, Johanna; Polson, Shawn; Xenarios, Ioannis; Arighi, Cecilia; Lu, Zhiyong

2016-01-01

Text mining in the biomedical sciences is rapidly transitioning from small-scale evaluation to large-scale application. In this article, we argue that text-mining technologies have become essential tools in real-world biomedical research. We describe four large scale applications of text mining, as showcased during a recent panel discussion at the BioCreative V Challenge Workshop. We draw on these applications as case studies to characterize common requirements for successfully applying text-mining techniques to practical biocuration needs. We note that system ‘accuracy’ remains a challenge and identify several additional common difficulties and potential research directions including (i) the ‘scalability’ issue due to the increasing need of mining information from millions of full-text articles, (ii) the ‘interoperability’ issue of integrating various text-mining systems into existing curation workflows and (iii) the ‘reusability’ issue on the difficulty of applying trained systems to text genres that are not seen previously during development. We then describe related efforts within the text-mining community, with a special focus on the BioCreative series of challenge workshops. We believe that focusing on the near-term challenges identified in this work will amplify the opportunities afforded by the continued adoption of text-mining tools. Finally, in order to sustain the curation ecosystem and have text-mining systems adopted for practical benefits, we call for increased collaboration between text-mining researchers and various stakeholders, including researchers, publishers and biocurators. PMID:28025348

Pressing needs of biomedical text mining in biocuration and beyond: opportunities and challenges

DOE PAGES

Singhal, Ayush; Leaman, Robert; Catlett, Natalie; ...

2016-12-26

Text mining in the biomedical sciences is rapidly transitioning from small-scale evaluation to large-scale application. In this article, we argue that text-mining technologies have become essential tools in real-world biomedical research. We describe four large scale applications of text mining, as showcased during a recent panel discussion at the BioCreative V Challenge Workshop. We draw on these applications as case studies to characterize common requirements for successfully applying text-mining techniques to practical biocuration needs. We note that system ‘accuracy’ remains a challenge and identify several additional common difficulties and potential research directions including (i) the ‘scalability’ issue due to themore » increasing need of mining information from millions of full-text articles, (ii) the ‘interoperability’ issue of integrating various text-mining systems into existing curation workflows and (iii) the ‘reusability’ issue on the difficulty of applying trained systems to text genres that are not seen previously during development. We then describe related efforts within the text-mining community, with a special focus on the BioCreative series of challenge workshops. We believe that focusing on the near-term challenges identified in this work will amplify the opportunities afforded by the continued adoption of text-mining tools. In conclusion, in order to sustain the curation ecosystem and have text-mining systems adopted for practical benefits, we call for increased collaboration between text-mining researchers and various stakeholders, including researchers, publishers and biocurators.« less

Pressing needs of biomedical text mining in biocuration and beyond: opportunities and challenges

DOE Office of Scientific and Technical Information (OSTI.GOV)

Singhal, Ayush; Leaman, Robert; Catlett, Natalie

Text mining in the biomedical sciences is rapidly transitioning from small-scale evaluation to large-scale application. In this article, we argue that text-mining technologies have become essential tools in real-world biomedical research. We describe four large scale applications of text mining, as showcased during a recent panel discussion at the BioCreative V Challenge Workshop. We draw on these applications as case studies to characterize common requirements for successfully applying text-mining techniques to practical biocuration needs. We note that system ‘accuracy’ remains a challenge and identify several additional common difficulties and potential research directions including (i) the ‘scalability’ issue due to themore » increasing need of mining information from millions of full-text articles, (ii) the ‘interoperability’ issue of integrating various text-mining systems into existing curation workflows and (iii) the ‘reusability’ issue on the difficulty of applying trained systems to text genres that are not seen previously during development. We then describe related efforts within the text-mining community, with a special focus on the BioCreative series of challenge workshops. We believe that focusing on the near-term challenges identified in this work will amplify the opportunities afforded by the continued adoption of text-mining tools. In conclusion, in order to sustain the curation ecosystem and have text-mining systems adopted for practical benefits, we call for increased collaboration between text-mining researchers and various stakeholders, including researchers, publishers and biocurators.« less

Object-based image analysis for the assessment of mineral extraction in conflict regions - a case study in the Democratic Republic of the Congo

NASA Astrophysics Data System (ADS)

Kranz, Olaf; Schoepfer, Elisabeth; Spröhnle, Kristin; Lang, Stefan

2016-06-01

In this study object-based image analysis (OBIA) techniques were applied to assess land cover changes related to mineral extraction in a conflict-affected area of the eastern Democratic Republic of the Congo (DRC) over a period of five years based on very high resolution (VHR) satellite data of different sensors. Object-based approaches explicitly consider spatio-temporal aspects which allow extracting important information to document mining activities. The use of remote sensing data as an independent, up-to-date and reliable data source provided hints on the general development of the mining sector in relation to socio-economic and political decisions. While in early 2010, the situation was still characterised by an intensification of mineral extraction, a mining ban between autumn 2010 and spring 2011 marked the starting point for a continuous decrease of mining activities. The latter can be substantiated through a decrease in the extend of the mining area as well as of the number of dwellings in the nearby settlement. A following demilitarisation and the mentioned need for accountability with respect to the origin of certain minerals led to organised, more industrialized exploitation. This development is likewise visible on satellite imagery as typical clearings within forested areas. The results of the continuous monitoring in turn facilitate non-governmental organisations (NGOs) to further foster the mentioned establishment of responsible supply chains by the mining industry throughout the entire period of investigation.

Environmental impacts of coal mine and thermal power plant to the surroundings of Barapukuria, Dinajpur, Bangladesh.

PubMed

Hossain, Md Nazir; Paul, Shitangsu Kumar; Hasan, Md Muyeed

2015-04-01

The study was carried out to analyse the environmental impacts of coal mine and coal-based thermal power plant to the surrounding environment of Barapukuria, Dinajpur. The analyses of coal, water, soil and fly ash were carried out using standard sample testing methods. This study found that coal mining industry and coal-based thermal power plant have brought some environmental and socio-economic challenges to the adjacent areas such as soil, water and air pollution, subsidence of agricultural land and livelihood insecurity of inhabitants. The pH values, heavy metal, organic carbon and exchangeable cations of coal water treated in the farmland soil suggest that coal mining deteriorated the surrounding water and soil quality. The SO4(2-) concentration in water samples was beyond the range of World Health Organisation standard. Some physico-chemical properties such as pH, conductivity, moisture content, bulk density, unburned carbon content, specific gravity, water holding capacity, liquid and plastic limit were investigated on coal fly ash of Barapukuria thermal power plant. Air quality data provided by the Barapukuria Coal Mining Company Limited were contradictory with the result of interview with the miners and local inhabitants. However, coal potentially contributes to the development of economy of Bangladesh but coal mining deteriorates the environment by polluting air, water and soil. In general, this study includes comprehensive baseline data for decision makers to evaluate the feasibility of coal power industry at Barapukuria and the coalmine itself.

Large Omnivore Movements in Response to Surface Mining and Mine Reclamation

PubMed Central

Cristescu, Bogdan; Stenhouse, Gordon B.; Boyce, Mark S.

2016-01-01

Increasing global demands have resulted in widespread proliferation of resource extraction. Scientists are challenged to develop environmental mitigation strategies that meet societal expectations of resource supply, while achieving minimal disruption to sensitive “wilderness” species. We used GPS collar data from a 9-year study on grizzly bears (Ursus arctos) (n = 18) in Alberta, Canada to assess movements and associated space use during versus after mining. Grizzly bear home range overlap with mined areas was lower during active mining except for females with cubs, that also had shortest movements on active mines. However, both females with cubs and males made shorter steps when on/close to mines following mine closure and reclamation. Our results show differences in bear movement and space-use strategies, with individuals from a key population segment (females with cubs) appearing most adaptable to mining disturbance. Preserving patches of original habitat, reclaiming the landscape and minimizing the risk of direct human-induced mortality during and after development can help conserve bears and other wildlife on industrially modified landscapes. PMID:26750094

Behavior and Release of Nitrogen at Mines and Quarries in Nordic Conditions

NASA Astrophysics Data System (ADS)

Karlsson, Teemu; Neitola, Raisa; Jermakka, Johannes; Merta, Elina; Mroueh, Ulla-Maija

2015-04-01

The increased extraction of mineral resources and mining activities creates added pressure on the environmental issues and a proper water management in mining areas in Finland. Among others, nitrogen compounds released from explosives or from mining processes can have a detrimental effect on the environment. Thus, this project aimed at comprehensive understanding on the nitrogen issue in the extractive industry. The project collected essential data on nitrogen compounds present in the environments of mines and quarries, and generated better understanding of the discharge and behaviour of nitrogen compounds in mining areas. The sources and balances of explosives-originated nitrogen compounds at mines and quarries of different sizes were investigated and compared. Additionally, the focus was in 'nitrogen smudging' problem of waste rocks and the intensity, as well as evolution and chemical characteristics of their nitrogen contamination. According to the results, the total load of potential nitrogen to the environment depends on the scale and type of the activity as well as the type of explosives used. The main emission sources of nitrogen are process and dewatering waters. A lysimeter study showed that the explosives originated nitrogen content of left over stones from natural stone quarrying is relatively low and ca. half of the nitrogen is leached within the first weeks after detonation. The "nitrogen smudging" of natural stone quarrying left over stones is relatively low to begin with and enhanced by the rapid flushing by rainwater, thus the residues of explosives should not be considered to prevent the utilization of otherwise mineralogically inert waste rocks of good technical quality. The overall nitrogen management should take into account the background concentrations and sensitivity of the local ecosystem. The research project "Solution for Control of Nitrogen Discharges at Mines and Quarries, (MINIMAN)" was realized during years 2012-2014 as a cooperative project with GTK, VTT and TTY together with several industrial and international partners and financed by Tekes Green Mining Programme.

Haulage Truck Operator. Open Pit Mining Job Training Series.

ERIC Educational Resources Information Center

British Columbia Dept. of Education, Victoria.

This training outline for haulage truck operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for…

Rotary Drill Operator. Open Pit Mining Job Training Series.

ERIC Educational Resources Information Center

Savilow, Bill

This training outline for rotary drill operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for…

Track Dozer Operator. Open Pit Mining Job Training Series.

ERIC Educational Resources Information Center

British Columbia Dept. of Education, Victoria.

This training outline for track dozer operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for…

Grader Operator. Open Pit Mining Job Training Series.

ERIC Educational Resources Information Center

Savilow, Bill

This training outline for grader operators, one in a series of eight outlines, is designed primarily for company training foremen or supervisors and for trainers to use as an industry-wide guideline for heavy equipment operator training in open pit mining in British Columbia. Intended as a guide for preparation of lesson plans both for classroom…