Prevalence of dental anomalies in patients with cleft lip and palate.

PubMed

Eslami, Neda; Majidi, Mohammad Reza; Aliakbarian, Majid; Hasanzadeh, Nadia

2013-09-01

The aim of the present study was to investigate the prevalence of dental anomalies in a group of patients with cleft lip and palate (CL/P) in the northeast of Iran. Ninety-one patients referring to the Cleft Lip and Palate Clinic of Mashhad Dental School were enrolled and classified into right CL/P, left CL/P, and bilateral CL/P groups. Photographs, dental casts, and panoramic and periapical radiographs were retrieved, and dental anomalies were recorded. χ test was used to analyze the frequency of dental anomalies according to type of cleft and sex. Missing maxillary lateral incisors was the most frequent dental anomaly, which was slightly higher in the bilateral group (61.1%). There were significantly more cases of missing lateral incisors outside the cleft area in right CL/P (P = 0.015). Peg lateral incisors were observed in 33.3% of bilateral CL/P compared with 28% of right and 23.3% of left unilateral cases. The sample presented rotations of central incisors in the cleft area in 33.3% of bilateral clefts. In unilateral clefts, it occurred more frequently in the right side (48%). Sexual dimorphism appeared only for maxillary central incisor rotation in the cleft area, which showed significantly greater frequency in females (P = 0.025). Transposition of maxillary canine and first premolars was found in 5.5% of bilateral, 8% of right, and 3.3% of left unilateral clefts. The prevalence of dental anomalies in the studied sample seems to be higher than that reported in the normal population. More anomalies were observed at the cleft side. The frequency of most anomalies was not significantly different between the 2 sexes.

Four-year follow-up of a polymethyl methacrylate-based bone cement graft for optimizing esthetics in maxillary anterior implants: a case report.

PubMed

Torres, Érica Miranda De; Naldi, Luis Fernando; Bernades, Karina Oliveira; Carvalho, Alexandre Leite

2017-01-01

Tooth loss promotes bone and gingival tissue remodeling, thus breaking the harmony between the residual ridge and natural teeth. This is critical in the anterior region of the mouth, and the integration of several dental specialties is often essential to successful rehabilitation with implants. This article describes a multidisciplinary approach to implant-supported oral rehabilitation in the maxillary anterior region, presenting a new technique for optimizing esthetics in implants. A 19-year-old woman was missing her central and lateral incisors and had 2 dental implants in the lateral incisor sites. The patient exhibited deficient thickness of the alveolar edge, loss of lip support, and absence of gingival architecture, and the implants were improperly placed. A multidisciplinary team created a correct emergence profile through a polymethyl methacrylate-based bone cement graft along with connective tissue grafts. This technique may be a useful therapeutic adjunct in dental implantology, showing good predictability and regular healing procedures.

Space closing versus space opening for bilateral missing upper laterals - aesthetic judgments of laypeople: a web-based survey.

PubMed

Qadri, Salim; Parkin, Nicola A; Benson, Philip E

2016-06-01

To investigate the opinions of laypeople regarding the aesthetic outcome of treating patients with developmental absence of both maxillary lateral incisors using either orthodontic space closure (OSC) or space opening and prosthetic replacement (PR). Cross sectional, web-based survey. A panel of five orthodontists and five restorative dentists examined post-treatment intra-oral images of 21 patients with developmental absence of both upper lateral incisors. A consensus view was obtained about the 10 most attractive images (5 OSC; 5 PR). The 10 selected images were used in a web-based survey involving staff and students at the University of Sheffield. In the first section, the participants were asked to evaluate the attractiveness of the 10 randomly arranged single images using a 5-point Likert scale. In the second section, an image of OSC was paired with an image of PR according to their attractiveness ranking by the clinician panel, and the participants were asked to indicate which of the two images they preferred. The survey received 959 completed responses with 9590 judgements. The images of OSC were perceived to be more attractive (mean rating 3·34 out of 5; SD 0·56) compared with the images of PR (mean rating 3·14 out of 5; SD 0·58) (mean diff 0·21; P < 0·001). Female and staff judges tended to give higher attractiveness ratings. Both females and males preferred the OSC images closing in 3 out of 4 paired images. Space closing was perceived to be more attractive than space opening by lay people. The findings have implications for advising patients about the best aesthetic outcome when both maxillary lateral incisors are missing.

[Dental anomalies in Chinese children with complete unilateral cleft lip and palate].

PubMed

Fan, Xin-xin; Li, Jing; Ge, Li-hong; Ma, Lian

2011-05-01

To investigate the prevalence of dental anomalies in Chinese children with complete unilateral cleft lip and palate (UCLP). Dental histories and radiographs of 244 Chinese children with UCLP were collected. The diagnosis of dental anomalies was based on panoramic radiographs before alveolar bone grafting. All patients were over 8 years old. In the UCLP group, 66.8% of the patients was presented with hypodontia. The maxillary lateral incisors were the most common teeth affected, followed by maxillary second premolars, mandibular incisors and mandibular second premolars. A total of 33.6% the patients was presented with dental malformation, most were microdontic laterel incisors. A total of 4.9% the patients was presented with hyperdontia. The supernumerary teeth were more frequently found in the cleft region. The prevalence of missing maxillary lateral incisor in the noncleft side was statistically different between genders, which was higher in male (P < 0.050). This group of Chinese children with UCLP demonstrated significantly higher prevalence of hypodontia, hyperdontia, and malformation on the cleft side than on the noncleft side (P < 0.01). Hypodontia is the most common type of dental anomalies. The prevalence of dental anomalies is higher in the UCLP patients than in the normal population. Dental anomalies occur more frequently on the cleft side than on the noncleft side.

The effect of canine characteristics and symmetry on perceived smile attractiveness when canine teeth are substituted for lateral incisors.

PubMed

Rayner, Wendy Jane; Barber, Sophy K; Spencer, Richard James

2015-03-01

To determine the effect of canine tooth characteristics and symmetry on perceived smile attractiveness when maxillary canine teeth are substituted for missing lateral incisors. Prospective, cross-sectional study. Non-clinical study undertaken from Leeds Dental Institute, UK. A composite full-face image of a smiling female was used to display various dentitions; a control image with an 'ideal' smile, plus six further images substituting the maxillary lateral incisors with canine teeth either unilaterally or bilaterally with varying size, shape, colour and gingival margin level. The seven images were shown to orthodontists (n = 30), dentists (n = 30) and lay people (n = 30) who were asked to rate smile attractiveness using a visual analogue scale. Dental professionals rated smiles with canine substitution for lateral incisor agenesis to be significantly less attractive than an ideal smile unless the substituted canine teeth approximated the lateral incisor in terms of size, shape, colour and gingival margin. Lay people did not find smiles where canine teeth were substituted for lateral incisors significantly more or less attractive than an ideal smile regardless of the canine tooth characteristics. Dental professionals were significantly more perceptive than lay people to the deviation from ideal smile aesthetics due to canine substitution. Smiles with unilateral canine substitution were not found to be significantly less attractive than bilateral canine substitution by all groups. Canine characteristics and observer status will affect how canine substitution for lateral incisor agenesis is viewed in terms of aesthetic outcome.

Nonsurgical periodontal therapy to treat a case of severe periodontitis: A 12-year follow-up.

PubMed

Carnio, João; Moreira, Ana Karina; Jenny, Todd; Camargo, Paulo M; Pirih, Flavia Q

2015-08-01

This case report describes the successful treatment of a severe chronic periodontitis case by nonsurgical therapy and a strict maintenance program over a 12-year period. A 38-year-old man concerned about the protrusion of his maxillary incisors was referred for periodontal treatment. The teeth in the maxillary arch had generalized severe chronic periodontitis. Several treatment options were presented to the patient including the most aggressive, extraction of all maxillary teeth, and the most conservative, scaling and root planing. The patient opted to having the most conservative approach, even though the prognoses for the maxillary teeth were unfavorable. Therefore, he received nonsurgical therapy via scaling and root planing combined with systemic antibiotics before referral to an orthodontist to address the esthetic concerns. The maxillary dentition was treated with orthodontic therapy to retract and align the maxillary anterior segment. Periodontal maintenance (1-hour session), including subgingival instrumentation, was performed 4 times per year until the end of the 12-year follow-up period. The patient only missed 2 appointments in 12 years. Twelve years later, the results revealed that all but 1 maxillary tooth were maintained in a state of acceptable health, function, and esthetics. Although most would agree with the initial poor prognosis of this patient's case, nonsurgical periodontal therapy was utilized with a 3-month periodontal maintenance program and demonstrated long-term success. The outcome presented in this case report may only have been possible because of patient compliance, professional experience, skill, and supervision throughout the course of treatment. Copyright © 2015 American Dental Association. Published by Elsevier Inc. All rights reserved.

An in vitro study to find the incidence of mesiobuccal 2 canal in permanent maxillary first molars using three different methods.

PubMed

Vasundhara, V; Lashkari, Krishna Prasada

2017-01-01

In-vitro study was done to evaluate the incidence of MB2 canals using three different methods (CBCT, CLINICAL ANALYSIS AND DENTAL LOUPES) and to compare the efficacy of the three methods in identifying the incidence of MB2 canals in maxillary permanent first molars. The study sample consisted of 120 extracted intact permanent maxillary molars. These extracted teeth were subjected to CBCT. Later the teeth were access opened with naked eye to find the incidence of MB2 canal, and then the teeth were visualised under dental loupe to locate MB2 canal if they were missed under naked eye. Results was statistically analysed by Mc Nemar's tests with Bonferroni correction, Chi square test and Cochran's Q test. CBCT showed high incidence (68.3%) of MB2 canal in maxillary first molars and it showed to be a reliable method in detecting MB2 canal. When compared to dental loupe (52.5%) and naked eye (25%), the dental loupe improved the detection of MB2 canal. Within the parameter of this study in detecting the incidence of MB2 canal, using CBCT dental loupes and naked eye, detection of MB2 canal was significantly higher with CBCT followed by dental loupe and least with naked eye.

Preoperative Cleft Lip Measurements and Maxillary Growth in Patients With Unilateral Cleft Lip and Palate.

PubMed

Antonarakis, Gregory S; Tompson, Bryan D; Fisher, David M

2016-11-01

Maxillary growth in patients with cleft lip and palate is highly variable. The authors' aim was to investigate associations between preoperative cleft lip measurements and maxillary growth determined cephalometrically in patients with complete unilateral cleft lip and palate (cUCLP). Retrospective cross-sectional study. Children with cUCLP. Preoperative cleft lip measurements were made at the time of primary cheiloplasty and available for each patient. Maxillary growth was evaluated on lateral cephalometric radiographs taken prior to any orthodontic treatment and alveolar bone grafting (8.5 ± 0.7 years). The presence of associations between preoperative cleft lip measurements and cephalometric measures of maxillary growth was determined using regression analyses. In the 58 patients included in the study, the cleft lateral lip element was deficient in height in 90% and in transverse width in 81% of patients. There was an inverse correlation between cleft lateral lip height and transverse width with a β coefficient of -0.382 (P = .003). Patients with a more deficient cleft lateral lip height displayed a shorter maxillary length (β coefficient = 0.336; P = .010), a less protruded maxilla (β coefficient = .334; P = .008), and a shorter anterior maxillary height (β coefficient = 0.306; P = .020) than those with a less deficient cleft lateral lip height. Patients with cUCLP present with varying degrees of lateral lip hypoplasia. Preoperative measures of lateral lip deficiency are related to later observed deficiencies of maxillary length, protrusion, and height.

"Maxillary lateral incisor partial anodontia sequence": a clinical entity with epigenetic origin.

PubMed

Consolaro, Alberto; Cardoso, Maurício Almeida; Consolaro, Renata Bianco

2017-01-01

The relationship between maxillary lateral incisor anodontia and the palatal displacement of unerupted maxillary canines cannot be considered as a multiple tooth abnormality with defined genetic etiology in order to be regarded as a "syndrome". Neither were the involved genes identified and located in the human genome, nor was it presumed on which chromosome the responsible gene would be located. The palatal maxillary canine displacement in cases of partial anodontia of the maxillary lateral incisor is potentially associated with environmental changes caused by its absence in its place of formation and eruption, which would characterize an epigenetic etiology. The lack of the maxillary lateral incisor in the canine region means removing one of the reference guides for the eruptive trajectory of the maxillary canine, which would therefore, not erupt and /or impact on the palate. Consequently, and in sequence, it would lead to malocclusion, maxillary atresia, transposition, prolonged retention of the deciduous canine and resorption in the neighboring teeth. Thus, we can say that we are dealing with a set of anomalies and multiple sequential changes known as sequential development anomalies or, simply, sequence. Once the epigenetics and sequential condition is accepted for this clinical picture, it could be called "Maxillary Lateral Incisor Partial Anodontia Sequence."

“Maxillary lateral incisor partial anodontia sequence”: a clinical entity with epigenetic origin

PubMed Central

Consolaro, Alberto; Cardoso, Maurício Almeida; Consolaro, Renata Bianco

2017-01-01

ABSTRACT The relationship between maxillary lateral incisor anodontia and the palatal displacement of unerupted maxillary canines cannot be considered as a multiple tooth abnormality with defined genetic etiology in order to be regarded as a “syndrome”. Neither were the involved genes identified and located in the human genome, nor was it presumed on which chromosome the responsible gene would be located. The palatal maxillary canine displacement in cases of partial anodontia of the maxillary lateral incisor is potentially associated with environmental changes caused by its absence in its place of formation and eruption, which would characterize an epigenetic etiology. The lack of the maxillary lateral incisor in the canine region means removing one of the reference guides for the eruptive trajectory of the maxillary canine, which would therefore, not erupt and /or impact on the palate. Consequently, and in sequence, it would lead to malocclusion, maxillary atresia, transposition, prolonged retention of the deciduous canine and resorption in the neighboring teeth. Thus, we can say that we are dealing with a set of anomalies and multiple sequential changes known as sequential development anomalies or, simply, sequence. Once the epigenetics and sequential condition is accepted for this clinical picture, it could be called “Maxillary Lateral Incisor Partial Anodontia Sequence.” PMID:29364376

Maxillary sinus floor extension and posterior tooth inclination in adolescent patients with Class II Division 1 malocclusion treated with maxillary first molar extractions.

PubMed

Livas, Christos; Halazonetis, Demetrios J; Booij, Johan Willem; Pandis, Nikolaos; Tu, Yu-Kang; Katsaros, Christos

2013-04-01

Our objective was to investigate potential associations between maxillary sinus floor extension and inclination of maxillary second premolars and second molars in patients with Class II Division 1 malocclusion whose orthodontic treatment included maxillary first molar extractions. The records of 37 patients (18 boys, 19 girls; mean age, 13.2 years; SD, 1.62 years) treated between 1998 and 2004 by 1 orthodontist with full Begg appliances were used in this study. Inclusion criteria were white patients with Class II Division 1 malocclusion, sagittal overjet of ≥4 mm, treatment plan including extraction of the maxillary first permanent molars, no missing teeth, and no agenesis. Maxillary posterior tooth inclination and lower maxillary sinus area in relation to the palatal plane were measured on lateral cephalograms at 3 time points: at the start and end of treatment, and on average 2.5 years posttreatment. Data were analyzed for the second premolar and second molar inclinations by using mixed linear models. The analysis showed that the second molar inclination angle decreased by 7° after orthodontic treatment, compared with pretreatment values, and by 11.5° at the latest follow-up, compared with pretreatment. There was evidence that maxillary sinus volume was negatively correlated with second molar inclination angle; the greater the volume, the smaller the inclination angle. For premolars, inclination increased by 15.4° after orthodontic treatment compared with pretreatment, and by 8.1° at the latest follow-up compared with baseline. The volume of the maxillary sinus was not associated with premolar inclination. We found evidence of an association between maxillary second molar inclination and surface area of the lower sinus in patients treated with maxillary first molar extractions. Clinicians who undertake such an extraction scheme in Class II patients should be aware of this potential association and consider appropriate biomechanics to control root uprighting. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Congenitally Missing Maxillary Lateral Incisors: Update on the Functional and Esthetic Parameters of Patients Treated with Implants or Space Closure and Teeth Recontouring

PubMed Central

Pini, Núbia Inocencya Pavesi; Marchi, Luciana Manzotti De; Pascotto, Renata Corrêa

2015-01-01

Maxillary lateral incisor agenesis (MLIA) is a condition that affects both dental esthetics and function in young patients, and represents an important challenge for clinicians. Although several treatment options are available, the mesial repositioning of the canines followed by teeth recontouring into lateral incisors; or space opening/maintenance followed by implant placement have recently emerged as two important treatment approaches. In this article, the current and latest literature has been reviewed in order to summarize the functional and esthetic outcomes obtained with these two forms of treatment of MLIA patients in recent years. Indications, clinical limitations and the most important parameters to achieve the best possible results with each treatment modality are also discussed. Within the limitations of this review, it is not possible to assert at this point in time that one treatment approach is more advantageous than the other. Long-term followup studies comparing the existing treatment options are still lacking in the literature, and they are necessary to shed some light on the issue. It is possible, however, to state that adequate multidisciplinary diagnosis and planning are imperative to define the treatment option that will provide the best individual results for patients with MLIA. PMID:25646137

A prospective randomized controlled trial of two-window versus solo-window technique by lateral sinus floor elevation in atrophic posterior maxilla: Results from a 1-year observational phase.

PubMed

Yu, Huajie; Qiu, Lixin

2017-10-01

Implant failures are more common when multiple missing posterior teeth need lateral sinus floor elevation owing to inadequate tissue maturation after grafting. Effects of lateral window dimensions on vital bone formation have rarely been compared. To compare endo-sinus bone formation between two- and solo-window techniques to rehabilitate multiple missing posterior teeth that need substantial augmentation. Patients with severely atrophic posterior maxilla were randomized to receive lateral sinus floor elevation via solo or two bony windows. Bone core specimens harvested from lateral aspect of the augmentation sites were histomorphometrically analyzed. Proportions of mineralized bone (MB), bone substitute materials (BS), and nonmineralized tissue (NMT) were quantified. Twenty-one patients underwent 23 maxillary sinus augmentations. One patient in each group dropped out during the follow-up period. Lateral window dimensions were 81.65 ± 4.59 and 118.04 ± 19.53 mm 2 in the test and control groups, respectively. Histomorphometric analysis revealed mean MB of 42.32% ± 13.07% and 26.00% ± 15.23%, BS of 40.34% ± 9.52% and 60.03% ± 10.13%, and NMT of 18.14% ± 14.24% and 14.75% ± 10.38% in test and control groups, respectively, with significant differences. The two-window technique could facilitate faster maturation and consolidation of the grafted volume and is an effective alternative for rehabilitation of severely atrophic posterior maxilla with multiple missing posterior teeth. © 2017 Wiley Periodicals, Inc.

Maxillary Hypoplasia With Congenital Oligodontia Treated by Maxillary Distraction Osteogenesis.

PubMed

Mishima, Sayaka; Yamaguchi, Takako; Watanabe, Takuma; Komatani, Toru; Nakao, Kazumasa; Takahashi, Katsu; Bessho, Kazuhisa

2018-02-27

It is known that congenitally missing teeth can often cause differences in craniofacial morphology; however, there are few reported cases of orthognathic surgical treatment for these patients. Herein, the authors report a rare case of maxillary hypoplasia with congenital oligodontia treated by maxillary distraction osteogenesis with internal device. A 17-year-old male presenting with multiple tooth agenesis and maxillary recession was referred to our hospital for orthognathic surgical treatment. Preoperative simulation surgery was performed using Full-Color 3-dimensional salt model. After surgery, improvement in maxillary recession and occlusal stability was observed. This report demonstrates the advantages of the method used herein, which includes reduction in operating time with increase in the safety of the procedure.

Is the Maxillary Sinus Really Suitable in Sex Determination? A Three-Dimensional Analysis of Maxillary Sinus Volume and Surface Depending on Sex and Dentition.

PubMed

Möhlhenrich, Stephan Christian; Heussen, Nicole; Peters, Florian; Steiner, Timm; Hölzle, Frank; Modabber, Ali

2015-11-01

The morphometric analysis of maxillary sinus was recently presented as a helpful instrument for sex determination. The aim of the present study was to examine the volume and surface of the fully dentate, partial, and complete edentulous maxillary sinus depending on the sex. Computed tomography data from 276 patients were imported in DICOM format via special virtual planning software, and surfaces (mm) and volumes (mm) of maxillary sinuses were measured. In sex-specific comparisons (women vs men), statistically significant differences for the mean maxillary sinus volume and surface were found between fully dentate (volume, 13,267.77 mm vs 16,623.17 mm, P < 0.0001; surface, 3480.05 mm vs 4100.83 mm, P < 0.0001) and partially edentulous (volume, 10,577.35 mm vs 14,608.10 mm, P = 0.0002; surface, 2980.11 mm vs 3797.42 mm, P < 0.0001) or complete edentulous sinuses (volume, 11,200.99 mm vs 15,382.29 mm, P < 0.0001; surface, 3118.32 mm vs 3877.25 mm, P < 0.0001). For males, the statistically different mean values were calculated between fully dentate and partially edentulous (volume, P = 0.0022; surface, P = 0.0048) maxillary sinuses. Between the sexes, no differences were only measured for female and male partially dentate fully edentulous sinuses (2 teeth missing) and between partially edentulous sinuses in women and men (1 teeth vs 2 teeth missing). With a corresponding software program, it is possible to analyze the maxillary sinus precisely. The dentition influences the volume and surface of the pneumatic maxillary sinus. Therefore, sex determination is possible by analysis of the maxillary sinus event through the increase in pneumatization.

Dental anomalies in an orthodontic patient population with maxillary lateral incisor agenesis.

PubMed

Citak, Mehmet; Cakici, Elif Bahar; Benkli, Yasin Atakan; Cakici, Fatih; Bektas, Bircan; Buyuk, Suleyman Kutalmış

2016-01-01

The purpose of this study was to evaluate the prevalence of dental anomalies in a subpopulation of orthodontic patients with agenesis of maxillary lateral incisors (MLI). The material of the present study included the records of the 1964 orthodontic patients. Panoramic radiographs and dental casts were used to analyze other associated eight dental anomalies, including agenesis of other teeth, dens invaginatus, dens evaginatus, peg shaped MLI, taurodontism, pulp stone, root dilaceration and maxillary canine impaction. Out of the 1964 patients examined, 90 were found to have agenesis of MLI, representing a prevalence of 4.6%. The most commonly found associated-anomalies were agenesis of other teeth (23.3%), peg-shaped MLIs (15.6%), taurodontism (42.2%), and dilacerated teeth (18.9%). Permanent tooth agenesis, taurodontism, peg-shaped maxillary lateral incisor, and root dilacerations are frequently associated with maxillary lateral incisor agenesis.

An Analysis of Maxillary Anterior Teeth Dimensions for the Existence of Golden Proportion: Clinical Study.

PubMed

Sandeep, Nalla; Satwalekar, Parth; Srinivas, Siva; Reddy, Chandra Sekhar; Reddy, G Ramaswamy; Reddy, B Anantha

2015-09-01

Appearance of the face is a great concern to everyone, as it is a significant part of self-image. The study analyzed the clinical crown dimensions of the maxillary anterior teeth with respect to their apparent mesiodistal widths, width-to-height ratio to determine whether golden proportion existed among the South Indian population. A total of 240 dentulous subjects were chosen for the study (120 males and 120 females) age ranging between 18 and 28 years. Full face and anterior teeth images of the subjects were made on specially designed device resembling a face-bow, mounted onto the wall under a standard light source. The width and height of the maxillary central incisors were measured on the stone casts using a digital caliper. The mean perceived maxillary lateral incisor to central incisor width ratio was 0.67 in males and 0.703 in females. The mean perceived maxillary canine to lateral incisor width ratio was 0.744 in males and 0.714 in females. The mean width-to-height ratio of the maxillary central incisor was 79.49% in males and 79.197% in females. The golden proportion was not found between perceived mesiodistal widths of maxillary central and lateral incisors and nor between perceived mesiodistal widths of maxillary lateral incisors and canines. In the majority of subjects, the width-to-height ratio of maxillary central incisor was within 75-80%. There are no statistically significant differences in maxillary anterior teeth proportions between males and females. The results may serve as guidelines for treatment planning in restorative dentistry and periodontal surgery.

Root canal treatment of a periradicular lesion caused by unintentional root damage after orthodontic miniscrew placement: a case report.

PubMed

Er, K; Bayram, M; Taşdemir, T

2011-12-01

To present the successful endodontic management of a maxillary lateral incisor tooth with a periradicular lesion caused by unintentional root damage after orthodontic miniscrew placement. A 22-year-old female was diagnosed with a skeletal Class II, Division 2 malocclusion with Class II molar and canine relationships on both sides. The treatment plan included distalization of the maxillary first molars bilaterally followed by full fixed appliance therapy. For the maxillary molar distalization, an appliance in conjunction with a miniscrew anchorage system was designed. Two months later, the patient came to the clinic with complaints of pain in the maxillary right lateral incisor region. On intraoral examination, intraoral sinus tracts were detected in the maxillary right buccal sulcus and palate. A large radiolucent lesion with a well-defined margin around the root of the maxillary right lateral incisor was seen. Root canal treatment was performed on the maxillary right lateral incisor tooth. The root canal was filled with gutta-percha and AH Plus sealer, using a lateral compaction technique. The final restoration of the tooth was completed using composite, and the tooth was reviewed after 10 months. The tooth was asymptomatic and radiographically showed repair of the lesion. Healing was achieved without any need for further endodontic or surgical intervention. Key learning points • This case illustrates the need to take care with miniscrews when performing orthodontic treatment, especially when the miniscrews are in close proximity to root apices. • The periradicular lesion as a result of miniscrew damage was successfully treated with root canal treatment. © 2011 International Endodontic Journal.

Extraction of Maxillary Central Incisors: An Orthodontic-Restorative Treatment

PubMed Central

Hedayati, Zohreh; Zare, Maryam; Bahramnia, Fateme

2014-01-01

Malformed central incisors with poor prognosis could be candidates for extraction especially in crowded dental arches. This case report refers to a 12-year-old boy who suffered from malformed upper central incisors associated with severe attrition. Upper lateral incisors were positioned palatally and canines were rotated and positioned in the high buccal area. The patient had class II malocclusion and space deficiency in both dental arches. Due to incisal wear and malformed short maxillary central incisors and the need for root canal therapy with a major crown build-up, these teeth were extracted. The maxillary lateral incisors were substituted. Thus the maxillary canines were substituted for lateral incisors and the first premolars were substituted for canines. In the lower dental arch the first bicuspids were extracted. Composite resin build-up was performed on the maxillary lateral incisors and canines. This allowed for the crowding and the malocclusion to be corrected. Subsequent gingivectomy improved the patient's gingival margins and smile esthetics one month after orthodontic therapy. PMID:25400954

Orthodontic management of bilateral maxillary canine-first premolar transposition and bilateral agenesis of maxillary lateral incisors: a case report.

PubMed

Di Palma, Elena; Di Giuseppe, Biagio; Tepedino, Michele; Chimenti, Claudio

2015-01-01

Maxillary canine-first premolar transposition (Mx.C.P1) is an uncommon dental positional anomaly that may create many orthodontic problems from both esthetic and functional points of view. In this report we show the orthodontic management of a case of Mx.C.P1 associated with bilateral maxillary lateral incisor agenesis and unilateral mandibular second premolar agenesis The patient was treated with a multibracket appliance and the extraction of the lower premolar. treatment was completed without the need for any prosthetic replacement.

Clinical and radiographic evaluation of maxillary central incisors exposure in patients undergoing maxillary advancement

PubMed Central

Trento, Guilherme dos Santos; Bernabé, Felipe Bueno Rosettti; da Costa, Delson João; Rebellato, Nelson Luis Barbosa; Klüppel, Leandro Eduardo; Scariot, Rafaela

2015-01-01

Abstract Introduction: Patients with dentofacial deformities may undergo orthodontic or orthodontic-surgical treatment. Both modalities can affect esthetics. Objective: This study aims to evaluate clinical and radiographic changes in exposure of maxillary central incisors occurring after orthognathic surgery for maxillary advancement. Methods: A total of 17 patients who underwent orthognathic surgery for maxillary advancement between September, 2010 and July, 2011 were selected. Exposure of maxillary central incisors was evaluated clinically and by lateral cephalograms. Measurements were taken one week before and three months after surgery. Data were paired in terms of sex, age, nasolabial angle, height and thickness of the upper lip, the amount of maxillary advancement, clinical exposure and inclination of maxillary central incisor by statistical tests (CI 95%). Results: After maxillary advancement, incisor clinical exposure had increased even with relaxed lips and under forced smile. Moreover, there was a mean increase of 23.33% revealed by lateral cephalograms. There was an inverse correlation between upper lip thickness and incisors postsurgical exposure revealed by radiographic images (p = 0.002). Conclusions: Significant changes in the exposure of maxillary central incisors occur after maxillary advancement, under the influence of some factors, especially lip thickness. PMID:26691970

A rare occurrence of supplementary maxillary lateral incisors and a detailed review on supernumerary teeth

PubMed Central

Chalakkal, Paul; Krishnan, Ramesh; De Souza, Neil; Da Costa, Godwin Clovis

2018-01-01

This article highlights a rare occurrence of nonsyndromic supplemental maxillary lateral incisors in a 11-year-old boy. It also includes a detailed literature review of supernumerary teeth. PMID:29731581

Dens invaginatus with necrotic pulp in a right maxillary lateral incisor with preserved vitality.

PubMed

Alessandro, Lanza; Fabrizio, Di Francesco; Gennaro, De Marco; Dario, Di Stasio; Eugenio, Guidetti; Letizia, Perillo; Luigi, Femiano; Felice, Femiano

2018-01-01

Dens invaginatus (DI) is a dental malformation occurring in several morphologic types. Consequently, treatment of teeth affected by DI can get complicated because of the complex root canal anatomy. The aim is to describe how to manage a rare report of a DI with necrotic pulp held within the vital pulp of a maxillary lateral incisor. Oral fistula was found on the buccal mucosa of the apex of the vital maxillary lateral incisor with a DI having necrotic pulp. Endodontic treatment of the maxillary lateral incisor and of the tract canal of DI was realized. Clinical disappearance of oral sinus tract was observed after 10 days. On the contrary, the disappearance of radiolucent area occurred after 6 months. A proper and prompt diagnosis is necessary to carry out effective prevention protocols or prevent consequences generating nonrecoverable endo-perio diseases.

Management of 2 teeth diagnosed with dens invaginatus with regenerative endodontics and apexification in the same patient: a case report and review.

PubMed

Kumar, Harleen; Al-Ali, Muna; Parashos, Peter; Manton, David J

2014-05-01

This review and case report present the treatment of a 10-year-old boy with both permanent maxillary lateral incisors demonstrating Oehlers type II dens invaginatus and pulpal involvement. Treatment was complicated by dental anxiety, supraventricular tachycardia, immature tooth development, and facial cellulitis. An infected necrotic pulp of the permanent maxillary left lateral incisor was treated by apexification and endodontic treatment with mineral trioxide aggregate. The necrotic pulp of the permanent maxillary right lateral incisor was treated with canal debridement and dressing under general anesthesia. Periapical healing of both teeth occurred, with the right lateral incisor showing continued root growth, thickening of the dentinal root walls, and completed apex formation. This tooth responded normally to pulp testing. Twenty-eight months after initial treatment, the right lateral incisor displayed progressive sclerosis of the canal. This case demonstrates possible pulpal regeneration of an infected maxillary right lateral incisor with dens invaginatus and an immature apex after minimal canal debridement. Copyright © 2014 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

[The supportive outcome of periodontal non-surgical therapy to severe chronic periodontitis accompanied with malformed lingual groove in lateral incisor for 6 years: a case report].

PubMed

Li, Zheng; Kang, Jun

2011-06-01

To track the initiating and developing process of one case diagnosed as chronic periodontitis accompanied with malformed lingual groove in maxillary lateral incisor and report the long-term prognosis to the periodontal conservative and supportive therapy. The patient was diagnosed with mild chronic periodontitis 6 years ago and accepted routine periodontal scaling and root planning (SRP) plus supportive periodontal therapy (SPT) one time. Two years later the periodontal condition deteriorated by deep pockets in molars and severe bone destruction around the maxillary lateral incisor with malformed lingual groove. After SRP in sites which pocket depth more than 4mm plus root canal therapy and lingual groove plasty of maxillary right lateral incisor, the SPT regularly proceeded at 3rd, 6th and 12th month. At present the whole periodontal tissue was healthy, the bone lesion around maxillary lateral incisor recovered well, the tooth had no mobile, the cosmetic effect andtooth function was in good state, and the patient was very satisfied.

Surgical management of maxillary and premaxillary osteomyelitis in a reticulated python (Python reticulatus).

PubMed

Latney, La'Toya V; McDermott, Colin; Scott, Gregory; Soltero-Rivera, Maria M; Beguesse, Kyla; Sánchez, Melissa D; Lewis, John R

2016-05-01

CASE DESCRIPTION A 1-year-old reticulated python (Python reticulatus) was evaluated because of a 2-week history of wheezing and hissing. CLINICAL FINDINGS Rostral facial cellulitis and deep gingival pockets associated with missing rostral maxillary teeth were evident. Tissues of the nares were swollen, resulting in an audible wheeze during respiration. Multiple scars and superficial facial wounds attributed to biting by live prey were apparent. Radiographic examination revealed bilateral, focal, rostral maxillary osteomyelitis. TREATMENT AND OUTCOME Wound irrigation, antimicrobials, and anti-inflammatory drug treatment resulted in reduced cellulitis. A 3-week regimen that included empirical antimicrobial treatment and improved husbandry resulted in resolution of the respiratory sounds and partial healing of bite wounds, but radiographic evaluation revealed progressive maxillary osteomyelitis. Microbial culture of blood yielded scant gram-positive cocci and Bacillus spp, which were suspected sample contaminants. Bilateral partial maxillectomies were performed; microbial culture and histologic examination of resected bone confirmed osteomyelitis with gram-positive cocci. Treatment with trimethoprim-sulfamethoxazole was initiated on the basis of microbial susceptibility tests. Four months later, follow-up radiography revealed premaxillary osteomyelitis; surgery was declined, and treatment with trimethoprim-sulfamethoxazole was reinstituted. Eight months after surgery, the patient was reevaluated because of recurrent clinical signs; premaxillectomy was performed, and treatment with trimethoprim-sulfamethoxazole was prescribed on the basis of microbial culture of bone and microbial susceptibility testing. Resolution of osteomyelitis was confirmed by CT 11 months after the initial surgery. CONCLUSIONS AND CLINICAL RELEVANCE Focal maxillectomies and premaxillectomy were successfully performed in a large python. Surgical management and appropriate antimicrobial treatment resulted in a good outcome.

Position and Eruption of Permanent Maxillary Canines in Cases of Maxillary Lateral Incisor Agenesis in Mixed Dentition.

PubMed

Lamas, Cátia; Lavall, Asela; Pinho, Teresa

2018-01-01

Assess whether the permanent maxillary canine (MC) has a natural tendency to erupt mesially in children with maxillary lateral incisors agenesis (MLIA), compared to children without agenesis. This retrospective, observational, cross-sectional study consisted of children between 5 and 12 years old divided into three groups: the first group with unilateral MLIA, in which an intraindividual analysis was performed, the second group presented bilateral MLIA, and the third group with patients without agenesis. These last two groups were matched for comparison interindividual, being pared by sex and maturation of the MC. The canine position in the horizontal sector showed a clear mesial positioning of the MC on the agenesis side in individuals with unilateral MLIA (group 1) when compared with the counter lateral side; and in individuals with bilateral MLIA (Group 2) compared with control Individuals without agenesis (group 3). Even with the maintenance of this deciduous tooth in the dental arch, the MC keeps its tendency to mesial eruption. There is a greater tendency for mesial angulation of the maxillary canine in patients with MLIA, regardless of the presence or absence of deciduous lateral incisor.

Investigation of tooth transposition in a non-syndromic Turkish anatolian population: characteristic features and associated dental anomalies.

PubMed

Celikoglu, Mevlut; Miloglu, Ozkan; Oztek, Ozkan

2010-09-01

The aims of this study were to investigate the frequency and characteristics of dental transpositions and to evaluate associated dental anomalies in a large sample of Turkish Anatolian population. A retrospective study was performed using panoramic radiographs of 6983 patients (4092 females and 2891 males) ranging in age from 12 to 27 subjected to Faculty of Dentistry at the University of Ataturk (Erzurum, Turkey) between 2005 and 2008. For each patient with tooth transposition we recorded the demographic variables (including age, sex), history of trauma, type, classification, and location of tooth transpositions, and associated dental anomalies. The Pearson chi-squared test was used to determine potential differences in the distribution of tooth transposition when stratified by gender. Tooth transposition was detected in 19 subjects (0.27%), with a 2.2:1 female male ratio (P=0.38). The most commonly observed transposition was maxillary canine-lateral incisor (60%). The frequencies of complete and incomplete transpositions were equal (10/10) and it was more common in the left side than in the right side (11/9). Of the 19 subjects, 10.5% had a peg shaped lateral incisor, 21.1% one congenitally missing tooth excluding third molar. Supernumerary tooth, impacted teeth excluding third molars, transmigrated tooth, and dilacerations were also observed. The frequency of tooth transposition was 0.27% in a Turkish Anatolian population and maxillary canine-lateral incisor was the most frequently observed transposition. Retained primary teeth were the most frequently observed dental anomaly in all types of tooth transposition.

Presurgical Unilateral Cleft Lip Anthropometrics and the Presence of Dental Anomalies.

PubMed

Antonarakis, Gregory S; Fisher, David M

2015-07-01

To investigate associations between cleft lip anthropometrics and dental anomalies in the permanent dentition in unilateral cleft lip patients. Retrospective cross-sectional study. Children with unilateral clefts of the lip, with or without cleft palate. Anthropometric lip measurements, made immediately prior to lip repair, were available for each patient. The presence of dental anomalies in the permanent dentition was assessed radiographically. The presence of associations between anthropometric lip measurements and prevalence rates of different dental anomalies were determined using logistic regression analyses. In the 122 included patients, the cleft lateral lip element was deficient in height in 80% and in transverse length in 84% of patients. Patients with more deficient cleft side lateral lip height and less deficient cleft side lateral lip transverse length were more likely to present with cleft side maxillary lateral incisor agenesis. On the other hand, patients with a less deficient cleft side lateral lip height and more deficient cleft side lateral lip transverse length were more likely to present with a cleft side supernumerary maxillary lateral incisor. When looking only at incomplete clefts, the cleft side lateral lip transverse length deficiency was more predictive of the presence of supernumerary maxillary lateral incisors (P = .030), while for complete clefts, the cleft side lateral lip height deficiency was more predictive of the presence of maxillary lateral incisor agenesis (P = .035). In patients with unilateral clefts, cleft lip anthropometrics have a predictive role in determining the occurrence of dental anomalies.

A multicenter interracial study of facial appearance. Part 2: A comparison of intraoral parameters.

PubMed

Owens, Edward G; Goodacre, Charles J; Loh, Poey Ling; Hanke, Gilberto; Okamura, Mitsunobu; Jo, Kwang-hun; Muñoz, Carlos A; Naylor, W Patrick

2002-01-01

This article compares interracial or gender differences of six intraoral dental parameters among six racial groups (African American, Caucasian, Chinese, Hispanic, Japanese, and Korean). The same 253 patients participating in part 1 were included in this portion of the study to evaluate six intraoral parameters. The data were collected and analyzed using a one-way analysis of variance, followed by the Tukey-Kramer test for honestly significant difference when statistically significant differences were found (P < .05). Women displayed significantly more gingival tissue in four of the six races, and African Americans displayed significantly more gingival tissue than any other race. Women had significantly more missing teeth than men in three of the six races studied. Japanese subjects had significantly fewer missing teeth and smaller maxillary central incisors than all other groups except Caucasians. Women had significantly narrower maxillary central incisors in three of the races. There was a significantly higher prevalence of Angle Class III relationships in Chinese subjects. The Japanese had significantly more Class II molar relationships than other races. Racial and gender differences were found in gingival tissue display, the number of missing teeth, maxillary right central incisor crown width, and Angle molar classification, but not in the amount of vertical or horizontal overlap of the anterior teeth.

Relationship between the maxillary transverse dimension and palatally displaced canines: A cone-beam computed tomographic study.

PubMed

Hong, Wei-Hsin; Radfar, Rebecca; Chung, Chun-Hsi

2015-05-01

To examine the relationship between palatally displaced maxillary canines (PDC) and the maxillary transverse dimension using cone-beam computed tomography (CBCT). Thirty-three patients (11 males and 22 females, mean age 18.2 years) with PDC were matched to 66 patients (22 males and 44 females, mean age 18.1 years) without PDC (control) by gender, age, and posterior occlusion. A CBCT image was taken on all the patients prior to any orthodontic treatment. For each patient the maxillary basal bone widths and interdental widths at the maxillary first molars and first and second premolars were measured on axial and coronal sections of CBCT images. In addition, the presence of permanent tooth agenesis and the widths of maxillary incisors were recorded. Similar maxillary transverse dimensions, both skeletally and dentally, were found between the PDC and control groups. In the PDC group, the number of patients with permanent tooth agenesis was six times higher than in the control group. In addition, the maxillary lateral incisors on PDC-affected sides were smaller than those of control group (P < .05). The maxillary transverse dimension, both skeletally and dentally, had no effect on the occurrence of PDC. The higher prevalence of permanent tooth agenesis was found in the PDC group. Moreover, the mean mesiodistal width of maxillary lateral incisors in the PDC group was significantly smaller than in the control group (P < .05).

Restoration of an intruded maxillary central incisor with a uniquely designed dowel and core restoration: a case report.

PubMed

Polat, Zelal Seyfioğlu; Tacir, Ibrahim Halil

2007-01-01

This article describes the restoration of an intruded root using a custom-made metal dowel and metal-ceramic veneer core restoration. The treatment plan for this patient consisted of restoring the missing esthetics and eliminating psychological trauma by utilizing the root of the intruded maxillary left central incisor to replace both missing central incisor crowns. This treatment will preserve space and bone until the patient is old enough for another prosthodontic restoration to be considered. As the lost fragments were not recovered, we considered this restoration of the intruded root to be the best therapeutic option, considering the effect on the patient's psyche. The patient was satisfied with the final result.

Patient with oligodontia treated with a miniscrew for unilateral mesial movement of the maxillary molars and alignment of an impacted third molar.

PubMed

Maeda, Aya; Sakoguchi, Yoko; Miyawaki, Shouichi

2013-09-01

This report describes the treatment of a 20-year-old woman with a dental midline deviation and 7 congenitally missing premolars. She had retained a maxillary right deciduous canine and 4 deciduous second molars, and she had an impacted maxillary right third molar. The maxillary right deciduous second molar was extracted, and the space was nearly closed by mesial movement of the maxillary right molars using an edgewise appliance and a miniscrew for absolute anchorage. The miniscrew was removed, and the extraction space of the maxillary right deciduous canine was closed, correcting the dental midline deviation. After the mesial movement of the maxillary right molars, the impacted right third molar was aligned. To prevent root resorption, the retained left deciduous second molars were not aligned by the edgewise appliance. The occlusal contact area and the maximum occlusal force increased over the 2 years of retention. The miniscrew was useful for absolute anchorage for unilateral mesial movement of the maxillary molars and for the creation of eruption space and alignment of the impacted third molar in a patient with oligodontia. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Orthodontic intrusion of maxillary incisors: a 3D finite element method study

PubMed Central

Saga, Armando Yukio; Maruo, Hiroshi; Argenta, Marco André; Maruo, Ivan Toshio; Tanaka, Orlando Motohiro

2016-01-01

Objective: In orthodontic treatment, intrusion movement of maxillary incisors is often necessary. Therefore, the objective of this investigation is to evaluate the initial distribution patterns and magnitude of compressive stress in the periodontal ligament (PDL) in a simulation of orthodontic intrusion of maxillary incisors, considering the points of force application. Methods: Anatomic 3D models reconstructed from cone-beam computed tomography scans were used to simulate maxillary incisors intrusion loading. The points of force application selected were: centered between central incisors brackets (LOAD 1); bilaterally between the brackets of central and lateral incisors (LOAD 2); bilaterally distal to the brackets of lateral incisors (LOAD 3); bilaterally 7 mm distal to the center of brackets of lateral incisors (LOAD 4). Results and Conclusions: Stress concentrated at the PDL apex region, irrespective of the point of orthodontic force application. The four load models showed distinct contour plots and compressive stress values over the midsagittal reference line. The contour plots of central and lateral incisors were not similar in the same load model. LOAD 3 resulted in more balanced compressive stress distribution. PMID:27007765

Camouflage treatment for class III malocclusion combined with traction of an impacted maxillary central incisor.

PubMed

Closs, Luciane Quadrado; Mundstock, Karina Santos; Ribeiro, Darlene Santos; Reston, Eduardo Galia; Silva, Aurelício Novaes

2010-01-01

This case report describes the treatment of a patient with an unerupted maxillary left central incisor, class III malocclusion with crossbite of the maxillary posterior teeth and lateral open bite. Treatment consisted of rapid maxillary expansion followed by anterior space opening, maxillary protraction and traction of the unerupted teeth with a light force system. Favorable results were obtained in terms of correcting incisor position and class III malocclusion. The results achieved remained stable throughout a 4-year retention period.

The Relationship between Dental Follicle Width and Maxillary Impacted Canines' Descriptive and Resorptive Features Using Cone-Beam Computed Tomography.

PubMed

Dağsuyu, İlhan Metin; Okşayan, Rıdvan; Kahraman, Fatih; Aydın, Mehmet; Bayrakdar, İbrahim Şevki; Uğurlu, Mehmet

2017-01-01

To assess the relationship between dental follicle width and maxillary impacted canines' descriptive and resorptive features with three-dimensional (3D) cone-beam computed tomography (CBCT). The study comprised 102 patients with cone-beam computed tomography 3D images and a total of 140 impacted canines. The association between maxillary impacted canine dental follicle width and the variables of gender, impaction side (right and left), localization of impacted canine (buccal, central, and palatal), and resorption of the adjacent laterals was compared. Measurements were analyzed with Student's t -test, Kruskal-Wallis test, and Mann-Whitney U statistical test. According to gender, no statistically significant differences were found in the follicle size of the maxillary impacted canine between males and females ( p > 0.05). Widths of the follicles were determined for the right and left impaction sides, and no statistically significant relation was found ( p > 0.05). There were statistically significant differences between root resorption degrees of lateral incisors and maxillary impacted canine follicle width ( p < 0.05). Statistically significant higher follicle width values were present in degree 2 (mild) resorption than in degree 1 (no) and degree 3 (moderate) resorption samples ( p < 0.05). No significant correlation was found between follicle width and the variables of gender, impaction side, and localization of maxillary impacted canines. Our study could not confirm that increased dental follicle width of the maxillary impacted canines exhibited more resorption risk for the adjacent lateral incisors.

Evaluation of the Immediate Dentofacial Changes in Late Adolescent Patients Treated with the Forsus™ FRD

PubMed Central

Gunay, Esen Ali; Arun, Tulin; Nalbantgil, Didem

2011-01-01

Objectives: The purpose of this study was to evaluate the short-term dentoalveolar and soft tissue changes in late adolescent patients treated with the Forsus™ FRD. Methods: A prospective study was carried out on 54 lateral cephalometric radiograms that were taken before placement and after removal of the appliance in the treatment group (15 subjects) and at the beginning and six months after in the control group (12 subjects). The patient selection criteria were as follows: skeletal and dental Class II malocclusion due to retrognatic mandible, normal or low-angle growth pattern, post-peak growth period, no extracted or congenitally missing permanent teeth, and minimum crowding in the lower dental arch. Results: The statistical assesment of the data suggested the following results: No sagital and vertical skeletal changes were induced. The mandibular incisors were protruded and intruded, while the maxillary incisors were retruded and extruded. The occlusal plane was rotated in clockwise direction as a result of these dentoalveolar changes. Overbite and overjet were reduced in all patients. Soft tissue profile slightly improved. Conclusions: The results revealed that, in late-adolescent patients Forsus™ FRD corrected Class II discrepancies through maxillary and mandibular dentoalveolar changes. PMID:22589581

Evaluation of the Immediate Dentofacial Changes in Late Adolescent Patients Treated with the Forsus(™) FRD.

PubMed

Gunay, Esen Ali; Arun, Tulin; Nalbantgil, Didem

2011-10-01

The purpose of this study was to evaluate the short-term dentoalveolar and soft tissue changes in late adolescent patients treated with the Forsus™ FRD. A prospective study was carried out on 54 lateral cephalometric radiograms that were taken before placement and after removal of the appliance in the treatment group (15 subjects) and at the beginning and six months after in the control group (12 subjects). The patient selection criteria were as follows: skeletal and dental Class II malocclusion due to retrognatic mandible, normal or low-angle growth pattern, post-peak growth period, no extracted or congenitally missing permanent teeth, and minimum crowding in the lower dental arch. THE STATISTICAL ASSESMENT OF THE DATA SUGGESTED THE FOLLOWING RESULTS: No sagital and vertical skeletal changes were induced. The mandibular incisors were protruded and intruded, while the maxillary incisors were retruded and extruded. The occlusal plane was rotated in clockwise direction as a result of these dentoalveolar changes. Overbite and overjet were reduced in all patients. Soft tissue profile slightly improved. The results revealed that, in late-adolescent patients Forsus™ FRD corrected Class II discrepancies through maxillary and mandibular dentoalveolar changes.

Early implant placement for a patient with ectodermal dysplasia: Thirteen years of clinical care.

PubMed

Knobloch, Lisa A; Larsen, Peter E; Saponaro, Paola C; L'Homme-Langlois, Emilie

2017-11-29

Patients with ectodermal dysplasia have abnormalities of 2 or more structures that originate from the ectoderm. The oral manifestations often include the congenital absence of teeth and malformed teeth. This clinical report describes the interdisciplinary care from childhood through the definitive dental rehabilitation completed at skeletal maturation to replace the missing teeth in a patient with ectodermal dysplasia. Treatment began at 9 years of age with an implant-assisted mandibular overdenture to improve function and replace the missing mandibular teeth. Orthodontic treatment for the consolidation of space, composite resin restorations, and interim removable dental prostheses were provided to improve esthetics and replace the missing maxillary teeth. Skeletal growth was monitored, and orthognathic surgery was performed at the cessation of growth. The definitive rehabilitation consisted of a mandibular fixed dental prosthesis supported by dental implants and a maxillary removable dental prosthesis to restore the patient to esthetics and function. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Observation of maxillary incisive canal using dry skulls between Hellman's dental age IA and IIIC.

PubMed

Naitoh, Munetaka; Arikawa, Tomoko; Nishiyama, Wataru; Gotoh, Kenichi; Nawa, Hiroyuki; Fukuta, Osamu; Ariji, Eiichiro

2015-01-01

The maxillary incisive canals were observed in childhood from infancy to school-aged children to clarify their development. Cone-beam computed tomography was performed to investigate 44 dry child skulls. Two-dimensional images of various planes in the maxillary incisive canal were reconstructed on a computer using 3-dimensional visualization and measurement software. Then, antero-posterior angulation, and antero-posterior and lateral axes of the maxillary incisive canal were measured at the inferior and middle levels. The mean difference of angulation between the inferior and middle levels was 2.3 degrees in IIC, and 11.1 degrees in IIIC. The mean ratio of the lateral axis to antero-posterior axis at the middle level was 2.54 in IIC, and 1.93 in IIIC. In conclusion, it was antero-posteriorly straight from IA to IIC, and, after IIIA, it curved at the middle level. The cross-sectional shape in IIC was depressed with a larger lateral axis.

Evaluation of maxillary growth: is there any difference using relief incision during palatoplasty?

PubMed

Maluf, Ivan; Doro, Ubiratan; Fuchs, Taíse; dos Santos, Diego Esteves; dos Santos Sacomam, Franserg; da Silva Freitas, Renato; Roca, Guilherme Berto

2014-05-01

Scar retraction due to exposed bone in palatoplasty is the leading cause of constricted maxilla. Modern techniques have focused on minimizing the effects of scarring by reducing the exposure of the bone area. The objective of the study was to compare the palatal mucoperiosteal detachment with minimal lateral incision, followed by their synthesis, with the maintenance of lateral areas for relaxation (similar to the von Langenbeck technique) and evaluate the transversal development of the maxilla. A prospective, randomized study was conducted, in which the molding of the dental arch of 14 pigs in 2 stages (at 1 month and 5 months) was performed. The pigs were divided into 3 groups: group 1 underwent lateral incision of the palate for mucoperiosteal detachment and maintenance of bone exposure; group 2 underwent mucoperiosteal palatal detachment with lateral access and no bone exposure; and group 3, the control animals, did not undergo any surgical procedures. Measurements of the dental arches were compared between the groups to assess differences in the development of the maxillary transverse diameter. There were no animals lost during the study. Group 1 showed greater growth restriction of the transverse diameter of the maxilla (36%) when compared with groups 2 (56%) and 3 (59%). Groups 2 and 3 showed similar transverse maxillary development, with no statistical difference. The technique of mucoperiosteal detachment without lateral relief incision has the advantage of reducing future morbidity of a constricted maxilla. This study demonstrated that the technique described can reduce rates of maxillary underdevelopment, a significant complication inherent in the procedure for palatoplasty. The lateral incisions reduce maxillary growth by approximately 20% as compared with this technique. Level II of evidence.

Oral Rehabilitation of a Severely Resorbed Edentulous Maxilla with Screwed-retained Hybrid Denture Using Cresco System: A Case Report

PubMed Central

Turkyilmaz, Ilser; Patel, Neal S.; McGlumphy, Edwin A.

2008-01-01

Due to the angulation of maxillary bone as the maxillary bone resorption occurs from a buccal to palatal direction, bucco-lingually tilted implant placement is more likely especially in the posterior maxilla. The aim of this paper was to present a case restored by using a maxillary hybrid denture using Cresco method. A 59-year-old woman with an edentulous maxilla and five missing mandibular teeth was referred for implant treatment. Six months after sinus lift operation, four mandibular implants and six maxillary implants were placed. Due to the bucco-lingual tilt of two implants, the Cresco method was chosen to fabricate the metal framework for the maxillary hybrid denture that was delivered four months after implant placement. The main advantages of the Cresco method are a perfectly passive framework fit and corrected screw access holes. All ten implants placed were considered successful at 1-year recall, and no screw access holes were seen in the buccal part of the maxillary acrylic teeth. It was concluded that such screw-retained maxillary hybrid denture using the Cresco method met the esthetic expectations of a highly demanding patient. PMID:19212552

The implications of different lateral wall thicknesses on surgical access to the maxillary sinus.

PubMed

Lim, Ee Lian; Ngeow, Wei Cheong; Lim, Daniel

2017-11-27

The objective of this study was to measure the topographic thickness of the lateral wall of the maxillary sinus in selected Asian populations. Measurements were made on the lateral walls of maxillary sinuses recorded using CBCT in a convenient sample of patients attending an Asian teaching hospital. The points of measurement were the intersections between the axes along the apices of the canine, first premolar, and second premolar and along the mesiobuccal and distobuccal apices of the first and second molars and horizontal planes 10 mm, 20 mm, 30 mm and 40 mm beneath the orbital floor. The CBCT images of 109 patients were reviewed. The mean age of the patients was 33.0 (SD 14.8) years. Almost three quarters (71.8%) of the patients were male. The mean bone thickness decreased beginning at the 10-mm level and continuing to 40 mm below the orbital floor. Few canine regions showed encroachment of the maxillary sinus. The thickness of the buccal wall gradually increased from the canine region (where sinus encroachment of the canine region was present) to the first molar region, after which it decreased to the thickness observed at the canine region. The buccal wall of the maxillary sinus became thicker anteroposteriorly, except in the region of the second molar, and thinner superoinferiorly. These changes will affect the approach used to osteotomize the lateral sinus wall for oral surgery and for the sinus lift procedure.

Prevalence of an unusual hypoplastic defect of the permanent maxillary lateral incisor in great apes.

PubMed

Hannibal, Darcy L

2017-02-01

In this article, I describe a previously unreported maxillary lateral incisor defect (MLID) of the enamel in great apes and evaluate potential general causes (genetic, systemic stress, or localized disturbance), as well as examine differences in prevalence among the represented taxa. This defect occurred only on the labial surface of the maxillary lateral incisor and extended from the cervical-mesial quarter of the crown to the mesial edge of the cementoenamel junction (CEJ). The study sample consisted of 136 great ape specimens, including 41 gorillas, 25 chimpanzees, and 70 orangutans from the Smithsonian's National Museum of Natural History great ape collection. I used logistic regression to assess the prevalence of this defect in the sample and a binomial probability test for bilaterality. This defect of the maxillary lateral incisor is the second most common defect I observed in the study sample (30.1% of individuals affected), and was more likely to occur in individuals with linear enamel hypoplasia (LEH) and pit defects than those without these defects. Among specimens with both maxillary lateral incisors present, the defect was mostly bilateral. Pan and Pongo were significantly more likely to exhibit the defect than Gorilla. Between Pongo species, Pongo pygmaeus was significantly more likely to exhibit the defect than Pongo abelii. Between subspecies of Gorilla, although Gorilla gorilla gorilla exhibited the defect and Gorilla gorilla beringei did not, the difference was not significant. No sex differences were evident in this sample. The prevalence of this defect indicates it is not hereditary. The bilateral trend indicates a systemic cause, although the high inter-tooth specificity suggests a local disturbance and a combination of both is possible. © 2016 Wiley Periodicals, Inc.

Unilateral advancement of the maxillary minor segment by distraction osteogenesis in patients with repaired unilateral cleft lip and palate: report of two cases.

PubMed

Kuroe, Kazuto; Iino, Shoichiro; Shomura, Kenji; Okubo, Akiro; Sugihara, Kazumasa; Ito, Gakuji

2003-05-01

Collapse of the maxillary minor segment with lateral crossbite is a common feature in patients with repaired unilateral cleft lip/palate because of maxillary alveolar bony defect and palatal scar tissue. Distraction osteogenesis (DOG) is an effective technique of lengthening and augmentation for bone and gingiva. This case report describes the effects of unilateral advancement of the maxillary minor segment by DOG in two patients with the repaired unilateral cleft lip/palate.

Rapidly Progressive Maxillary Atelectasis.

PubMed

Elkhatib, Ahmad; McMullen, Kyle; Hachem, Ralph Abi; Carrau, Ricardo L; Mastros, Nicholas

2017-07-01

Report of a patient with rapidly progressive maxillary atelectasis documented by sequential imaging. A 51-year-old man, presented with left periorbital and retro-orbital pain associated with left nasal obstruction. An initial computed tomographic (CT) scan of the paranasal sinuses failed to reveal any significant abnormality. A subsequent CT scan, indicated for recurrence of symptoms 11 months later, showed significant maxillary atelectasis. An uncinectomy, maxillary antrostomy, and anterior ethmoidectomy resulted in a complete resolution of the symptoms. Chronic maxillary atelectasis is most commonly a consequence of chronic rhinosinusitis. All previous reports have indicated a chronic process but lacked documentation of the course of the disease. This report documents a patient of rapidly progressive chronic maxillary atelectasis with CT scans that demonstrate changes in the maxillary sinus (from normal to atelectatic) within 11 months.

Prevalence and distribution of dental anomalies: a comparison between maxillary and mandibular tooth agenesis.

PubMed

Al-Abdallah, Mariam; AlHadidi, Abeer; Hammad, Mohammad; Al-Ahmad, Hazem; Saleh, Raja'

2015-11-01

The aim of this study was to compare the pattern and prevalence of associated dental anomalies between maxillary and mandibular tooth agenesis (hypodontia). A sample of 3315 dental patients, aged 8.6 to 25.4 years, was surveyed for tooth agenesis (excluding third molars): 106 subjects were diagnosed with maxillary hypodontia (group 1) and 70 with mandibular hypodontia (group 2). Both groups were examined for the following dental anomalies: retained deciduous molars, infraocclusion of deciduous molars, impaction, microdontia of maxillary lateral incisors, supernumerary teeth, transposition, transmigration, and ectopic eruption of the permanent molars. For statistical testing, the chi-square test (P <0.05) was used to compare the occurrences of these anomalies among the groups. We found that 77.5% of the patients in the mandibular hypodontia group had at least 1 dental anomaly compared with 49.5% in the maxillary hypodontia group (P <0.0001). The only dental anomaly with a significantly increased prevalence in the maxillary hypodontia group compared with the mandibular hypodontia group was microdontia of the maxillary lateral incisors (groups 1, 46.7%; group 2, 12.9%; P <0.0001). On the other hand, the prevalences of retained deciduous molars (group 1, 9.4%; group 2, 60.0%), infraoccluded deciduous molars (group 1, 0.9%; group 2, 7.1%), and impacted teeth (group 1, 22.6%; group 2, 38.6%) were significantly higher in the mandibular hypodontia group. The prevalences of supernumerary teeth, transposition, transmigration, and ectopic eruption of permanent molars were low and not significantly different between the groups. Tooth agenesis isolated to the maxilla is frequently associated with microdontia of the maxillary lateral incisors, whereas tooth agenesis isolated to the mandible is frequently associated with retained deciduous molars, infraoccluded deciduous molars, and impacted teeth. The results of this study may provide additional evidence supporting the field-specific genetic control theory for dental development in both jaws. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Asymmetric extractions in a patient with a hopeless maxillary central incisor, followed by treatment with mini-implant anchorage.

PubMed

Jung, Min-Ho

2018-05-01

Premolar extraction is 1 option for treatment of patients with malocclusion and severe crowding or protrusion. When the patient has missing or hopeless teeth other than premolars, it is possible to consider removal of those teeth to use the space to decrease crowding. A 15-year-old girl sought treatment for severe crowding. She had already lost her maxillary right first premolar as a result of caries 1 year previously and had a hopeless maxillary right central incisor. Her mandibular left first molar still caused discomfort even after endodontic treatment. Extractions of the maxillary right central incisor and mandibular right first premolar and left first molar were chosen to resolve the occlusion problems. Orthodontic mini-implants were placed to translocate the maxillary left central incisor across the midpalatal suture to use the space in the maxillary right quadrant to relieve the crowding. Although a different extraction option was used in each quadrant, the final occlusion was acceptable. After debonding, porcelain crowns were placed on the anterior teeth to improve esthetics. The treatment result remained stable after 2 years of retention. Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Dental and craniofacial findings in eight miniature schnauzer dogs affected by myotonia congenita: preliminary results.

PubMed

Gracis, M; Keith, D; Vite, C H

2000-09-01

Myotonia is a clinical sign characterized by the delay of skeletal muscle relaxation following the cessation of a voluntary activity or the termination of an electrical or mechanical stimulus. Recently, Miniature Schnauzers with myotonia congenita associated with defective chloride ion conductance across the skeletal muscle membrane were identified. Congenital myotonia in these dogs appears to follow an autosomal recessive mode of inheritance. Craniofacial and dental findings of eight Miniature Schnauzer dogs with myotonia congenita are described in the present paper. These findings include: delayed dental eruption of both deciduous and permanent dentition: persistent deciduous dentition; unerupted or partially erupted permanent teeth: crowding and rotation of premolar and or incisor teeth: missing teeth: increased interproximal space between the maxillary fourth premolar and first molar teeth: decreased interproximal space between the maxillary canine and lateral incisor teeth: inability to fully close the mouth due to malocclusion: distoclusion: and, decreased mandibular range of motion. A long narrow skull with a flattened zygomatic arch and greater mandibular body curvature were also consistent findings in the affected dogs. The small number of dogs studied prevents conclusive statements about the origin of these abnormalities, however it is interesting that only 1 of 45 unaffected Miniature Schnauzer dogs showed similar traits.

Clinical and biological analysis in graftless maxillary sinus lift.

PubMed

Parra, Marcelo; Olate, Sergio; Cantín, Mario

2017-08-01

Maxillary sinus lift for dental implant installation is a well-known and versatile technique; new techniques are presented based on the physiology of intrasinus bone repair. The aim of this review was to determine the status of graftless maxillary sinus lift and analyze its foundations and results. A search was conducted of the literature between 1995 and 2015 in the Medline, ScienceDirect, and SciELO databases using the keywords "maxillary sinus lift," "blood clot," "graftless maxillary sinus augmentation," and "dental implant placement." Ten articles were selected for our analysis of this technique and its results. Despite the limited information, cases that were followed for at least six months and up to four years had a 90% success rate. Published techniques included a lateral window, elevation of the sinus membrane, drilling and dental implant installation, descent of the membrane with variations in the installation of the lateral wall access and suturing. The physiology behind this new bone formation response and the results of the present research were also discussed. We concluded that this is a promising and viable technique under certain inclusion criteria.

To evaluate the validity of Recurring Esthetic Dental proportion in natural dentition

PubMed Central

Shetty, Shilpa; Pitti, Varun; Satish Babu, CL; Surendra Kumar, GP; Jnanadev, KR

2011-01-01

Background: Different proportions are described in the literature for smile designing, such as Golden proportion, Golden percentage, Preston's proportion, and recently, Recurring Esthetic Dental (RED) proportion. Aims and Objectives: To evaluate the existence of RED proportion in natural dentition. To determine the relative height of maxillary lateral incisor and canine occurring in natural dentition so that it can be used in any of the above proportions. Materials and Methods: Fifteen male subjects and 15 female subjects in each of the different age groups of 18–23 years, 24–29 years and 30–35 years were selected for this study (total 90). Photographs of the subjects were taken using Nikon D200 camera with 135 mm lens and analyzed using Adobe Photoshop CS4 extended software. The height and width of maxillary central incisors, lateral incisors and canines were found out using the measuring tool provided in the software. Results: Average width ratio and height ratio of maxillary lateral incisor to central incisor and maxillary canine to lateral incisor were calculated to check the existence of RED proportion in natural dentition. Average lateral incisor to central incisor height ratio for “small”- and “medium”-sized teeth was found to be 88% and for “tall”-sized teeth was found to be 84%. Average canine to lateral incisor height ratio for “small”- and “medium”-sized teeth was found to be 106% and for “tall”-sized teeth was found to be 105%. Conclusions: Within the limitations of the study, RED proportion was not seen in natural dentition. PMID:22025841

Anesthetic efficacy of the intraosseous injection in maxillary and mandibular teeth.

PubMed

Coggins, R; Reader, A; Nist, R; Beck, M; Meyers, W J

1996-06-01

The objective of this study was to determine the anesthetic efficacy of the intraosseous injection as a primary technique in human maxillary and mandibular teeth. Forty subjects received two sets of intraosseous injections with 1.8 ml of 2% lidocaine with 1:100,000 epinephrine at two successive appointments. The experimental teeth consisted of 40 groups of maxillary and mandibular first molars and lateral incisors. Each experimental tooth and adjacent teeth were tested with an electric pulp tester at 4-minute cycles for 60 minutes. Anesthetic success was defined as no subject response to the maximum output of the pulp tester (80 reading) for two consecutive readings. Anesthetic success occurred in 75% of mandibular first molars, in 93% of maxillary first molars, in 78% of mandibular lateral incisors, and in 90% of maxillary lateral incisors. Overall, for the intraosseous injection onset was immediate, the duration of pulpal anesthesia steadily declined over the 60 minutes, there was a 78% incidence of subjective increase in heart rate, the majority of the subjects had no pain or mild pain with perforation and solution deposition, and 3% of the subjects had slow healing perforation sites. The results of this study indicate that the intraosseous injection may provide pulpal anesthesia in 75% to 93% of noninflamed teeth as a primary technique. However, the duration of pulpal anesthesia declines steadily over an hour.

Management of geminated maxillary lateral incisor using cone beam computed tomography as a diagnostic tool.

PubMed

James, Elizabeth Prabha; Johns, Dexton Antony; Johnson, Ki; Maroli, Ramesh Kumar

2014-05-01

Geminated teeth are consequences of developmental anomalies leading to joined elements, due to incomplete attempt of one tooth germ to divide into two. This case report describes successful endodontic treatment of an unaesthetic geminated permanent maxillary lateral incisor tooth and its esthetic rehabilitation using all ceramic crowns. Newer imaging technique like cone beam computed tomography was taken for the better understanding of the complicated root canal morphology.

Direct Resin Composite Restoration of Maxillary Central Incisors with Fractured Tooth Fragment Reattachment: Case Report.

PubMed

Szmidt, Monika; Górski, Maciej; Barczak, Katarzyna; Buczkowska-Radlińska, Jadwiga

This article presents a clinical protocol to reconstruct two accidentally damaged maxillary central incisors using composite resin material and a fractured tooth component. A patient was referred to the clinic with fracture of the two maxillary central incisors. Clinical examination revealed that both teeth were fractured in the middle third of the crown and that the fractures involved enamel and dentin with no pulp exposure. The patient had also suffered a lower lip laceration. When the lip was evaluated, a fractured fragment of the maxillary right central incisor was found inside the wound. The missing part of the tooth was replaced via adhesive attachment. Due to the damage of the fractured part of the maxillary left central incisor, direct composite restoration of this tooth was performed. With the advent of adhesive dentistry, the process of fragment reattachment has become simplified and more reliable. This procedure provides improved function, is faster to perform, and provides long-lasting effects, indicating that reattachment of a coronal fragment is a realistic alternative to placement of conventional resin composite restorations.

Maxillary premolar resorption by canines: three case reports.

PubMed

Cooke, M E; Nute, S J

2005-05-01

Three unusual cases of maxillary premolar root resorption are reported. Three teenage patients were referred to the orthodontic department for management of ectopic maxillary canines. Radiographic examination revealed unilateral premolar root resorption in all three patients. This represents an unusual finding. Whereas the prevalence of maxillary lateral incisor root resorption secondary to palatally ectopic canines has been reported, the prevalence of premolar root resorption is unknown. This report discusses the findings in the context of the available literature. The postulated aetiology and the need for early diagnosis are highlighted.

Analysis of the golden proportion and width/height ratios of maxillary anterior dentition in patients with lateral incisor agenesis.

PubMed

Pini, Núbia Pavesi; de-Marchi, Luciana Manzotti; Gribel, Bruno Frazão; Ubaldini, Adriana Lemos Mori; Pascotto, Renata Corrêa

2012-12-01

  The purpose of this study was to assess the presence of the golden proportion (GP) in the facial view tooth-to-tooth width proportion of the six maxillary anterior teeth and to evaluate the width/height (W/H) ratios of the incisors of patients with maxillary lateral incisor (LI) agenesis treated either with implants or orthodontically (by moving canines into the position of the laterals, recontouring them, and placing composite restorations over the repositioned teeth).   Forty-eight patients with LI agenesis were divided into four experimental groups: unilateral recontouring group (N = 10), bilateral recontouring group (BRG, N = 18), unilateral implant group (UIG, N = 10), bilateral implant group (N = 10), and a control group (CG, N = 25) of patients without agenesis. GP ratios were determined on patients' dental casts placed over Levin's grids, whereas W/H ratios were measured directly on the casts and a millimeter ruler to determine these distances. Statistical analysis was performed with Shapiro-Wilk, Kruskal-Wallis, Mann-Whitney, Friedman, and Wilcoxon tests (p < 0.05).   The incidence of GP in the tooth-to-tooth width proportions was significantly different between groups and more commonly found between centrals and laterals than between laterals and canines. The GP was more likely to be observed in the BRG, UIG, and CG. The results demonstrated that the GP was not found to be present in the majority of the cases treated with maxillary agenesis, regardless of the method of treatment. The mean W/H ratios of the laterals ranged between 0.75 and 0.90.   Although the GP may be a useful diagnostic guide, it was not observed in the majority of esthetic outcomes of patients treated with maxillary LI agenesis in this study. The assessment of the golden proportion and width/height ratio of upper anterior teeth in patients with upper lateral incisor agenesis treated with either implants or tooth re-contouring may assist dentists and patients in deciding the best treatment option based on the peculiarities of each case. © 2012 Wiley Periodicals, Inc.

Comparative study of dental anomalies assessed with panoramic radiographs of Down syndrome and non-Down syndrome patients.

PubMed

Mayoral-Trias, M A; Llopis-Perez, J; Puigdollers Pérez, A

2016-03-01

The aim of this study was to compare the prevalence of dental anomalies from panoramic radiographs of age-matched individuals with and without Down Syndrome (DS). This is a retrospective cross-sectional study. A group of 41 patients (19 female and 22 male) with Down Syndrome (DS), mean age 10.6 ± 1.4 and a control group of 42 non- DS patients (26 female and 16 male), mean age 11.1 ± 1.3 were studied. This study examined the medical history and a panoramic radiograph of each patient. The dental anomalies studied were agenesis of permanent teeth (except third molars), size and shape maxillary lateral anomalies and maxillary canine eruption path anomalies. The groups were compared using Mann-Whitney and Wilcoxon non-parametric tests (p<0.05). Rho Spearman correlation coefficient was applied for associations. Results Agenesis of one permanent tooth was found in 73.17% of DS subjects and two or more permanent teeth in more than 50% (p<0.001). Maxillary lateral incisor was the most frequently absent tooth followed by mandibular second premolar, mandibular lateral incisor, maxillary second premolar and mandibular central incisor. No significant differences were detected between maxilla and mandible on either side. No differences in gender were observed. Significant differences were found for size and shape anomalies of maxillary lateral incisors, as well as for canine eruption anomalies (p<0.05). No gender differences were observed for either variable. No association was found between these two variables in the DS group. More dental anomalies were present in the DS group than in the control group, which implied that DS patients need periodical dental and orthodontic supervision so as to prevent or control subsequent oral problems.

Delayed retrieval of a displaced maxillary third molar from infratemporal space via trans-sinusoidal approach: a case report and the review of the literature.

PubMed

Sencimen, Metin; Gülses, Aydin; Secer, Sencer; Zerener, Tamer; Özarslantürk, Savaş

2017-03-01

The aim of this case report is to present the trans-sinusoidal pathway used to remove a displaced maxillary third molar from the infratemporal fossa and review the English literature regarding the techniques used. A 21-year-old male patient was referred with the findings of an oroantral fistula on the left maxillary vestibular first molar region and slight restriction of mouth opening. The patient underwent a maxillary sinus surgery in order to remove a sinus retention cyst via Caldwell-Luc access in a dental clinic 4 years ago. A computerized tomography scan showed the inverted third molar to be located in the infratemporal fossa, just between zygomatic arch and lateral pterygoid plate. The tooth was accessed through the remaining lateral bone defect from the Caldwell-Luc approach of the lateral sinus wall. The bone defect was extended. The posterior bony wall of the maxillary sinus was removed via a surgical burr. After that, the displaced tooth was exposed. The tooth was mobilized via Warwick James elevator downwards and removed with a forceps. Access for surgical removal of the tooth from the infratemporal fossa is not only difficult but also has potential for morbidity due to the structures running through it. Wide incision in the maxillary sulcus and blunt dissection are reported with lower success rates and usually necessitate a second intervention via extraoral route. Trans-sinusoidal approach might be an old fashioned but relatively successfully attempt in the removal of the upper third molars from the infratemporal fossa. Considering the time of removal, if no symptoms were present, it is beneficial to wait for a couple of weeks thus facilitating development of fibrous surrounding around the tooth.

Complications of misdiagnosis of maxillary canine ectopic eruption.

PubMed

Garib, Daniela Gamba; Janson, Guilherme; Baldo, Taiana de Oliveira; dos Santos, Patrícia Bittencourt Dutra

2012-08-01

Ectopic eruption of maxillary canines can be associated with root resorption of adjacent teeth. This case report describes and discusses an interesting case of a 15-year-old girl with a Class III malocclusion and an impacted maxillary canine. Because of the unfavorable position of the ectopic canine and the severe root resorption of the maxillary left central and lateral incisors, the treatment options included extraction of the maxillary permanent canines. The mandibular first premolars were extracted to compensate for the Class III malocclusion. A panoramic radiograph taken earlier in the mixed dentition already indicated a possible eruption disturbance of the maxillary left permanent canine. The importance of early diagnosis of maxillary canine ectopic eruption is highlighted in this case report. The early identification of radiographic signs of an ectopic pathway of eruption should be followed by deciduous canine extraction to prevent canine retention and maxillary incisor root resorption. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Minimally invasive medial maxillectomy and the position of nasolacrimal duct: the CT study.

PubMed

Sieskiewicz, Andrzej; Buczko, Krzysztof; Janica, Jacek; Lukasiewicz, Adam; Lebkowska, Urszula; Piszczatowski, Bartosz; Olszewska, Ewa

2017-03-01

Several minimally invasive modifications of endoscopic medial maxillectomy have been proposed recently, with the least traumatic techniques utilizing the lacrimal recess as a route to enter the sinus. The aim of the study was to analyze the anatomy of medial maxillary wall in the region of nasolacrimal canal and, thus, to determine the capability of performing minimally invasive approach to the maxillary sinus leading through the lacrimal recess. The course of nasolacrimal canal and the distance between the anterior maxillary wall and the nasolacrimal canal (the width of lacrimal recess) were evaluated in 125 randomly selected computed tomography (CT) head examinations. The proportion of cases with unfavorable anatomical conditions (lacrimal recess too narrow to accept a 4 mm optic) to perform minimally invasive middle maxillectomy was assessed. The width of lacrimal recess, measured at the level of the inferior turbinate attachment, varied between 0 and 15.2 mm and was related to slanted course of nasolacrimal canal. The more perpendicular the axis of the canal to the nasal flor, the narrower the lacrimal recess. In about 16% of cases, lacrimal recess width was less than 4 mm and in 14.4% it was missing. The endoscopic approach to maxillary sinus leading through lacrimal recess is possible in about 70% of patients. In the remaining group of patients when the lacrimal recess is too narrow, this type of approach may be difficult to perform without damaging the piriform aperture rim or bony framework of nasolacrimal duct, or it may be impracticable when lacrimal recess is missing.

Protraction of mandibular second and third molars into missing first molar spaces for a patient with an anterior open bite and anterior spacing.

PubMed

Baik, Un-Bong; Chun, Youn-Sic; Jung, Min-Ho; Sugawara, Junji

2012-06-01

In a young woman, aged 18 years 8 months, who had an anterior open bite and anterior spacing, the right and left mandibular first molar extraction spaces were closed by protraction of the second and third molars without reciprocal retraction of the incisors and the premolars. The amounts of protraction for the second molars were 12 mm on the right side and 11 mm on the left side. Two miniscrews were inserted into the mesiobuccal side of the edentulous spaces, and 2 more screws were inserted into the anterior sites after removing previous miniscrews. In addition, 4 miniscrews were inserted into the buccal and palatal sides between the first and second maxillary molars to intrude the maxillary posterior teeth, which had extruded into the missing mandibular spaces. Careful biomechanical consideration was used to prevent extrusion of the molars and worsening of the anterior open bite from protraction of the posterior teeth. Ultimately, the anterior open bite was corrected by both intrusion of the maxillary molars and extrusion of the maxillary anterior teeth. Excellent occlusion and correction of the anterior open bite were achieved without tipping, rotation of the posterior teeth, or other problems. The right mandibular third molar, which had been impacted at the beginning of treatment, erupted into the second molar space and functioned properly. At the 1-year follow-up examination, the patient had a slight anterior open bite, but closure of the first molar extraction spaces was well maintained. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

A comparative study on the stress distribution around dental implants in three arch form models for replacing six implants using finite element analysis.

PubMed

Zarei, Maryam; Jahangirnezhad, Mahmoud; Yousefimanesh, Hojatollah; Robati, Maryam; Robati, Hossein

2018-01-01

Dental implant is a method to replacement of missing teeth. It is important for replacing the missed anterior teeth. In vitro method is a safe method for evaluation of stress distribution. Finite element analysis as an in vitro method evaluated stress distribution around replacement of six maxillary anterior teeth implants in three models of maxillary arch. In this in vitro study, using ABAQUS software (Simulia Corporation, Vélizy-Villacoublay, France), implant simulation was performed for reconstruction of six maxillary anterior teeth in three models. Two implants were placed on both sides of the canine tooth region (A model); two implants on both sides of the canine tooth region and another on one side of the central incisor region (B model); and two implants on both sides of the canine tooth region and two implants in the central incisor area (C model). All implants evaluated in three arch forms (tapered, ovoid, and square). Data were analyzed by finite analysis software. Von Mises stress by increasing of implant number was reduced. In a comparison of A model in each maxillary arch, the stress created in the cortical and cancellous bones in the square arch was less than ovoid and tapered arches. The stress created in implants and cortical and cancellous bones in C model was less than A and B models. The C model (four-implant) reduced the stress distribution in cortical and cancellous bones, but this pattern must be evaluated according to arch form and cost benefit of patients.

Clinical and biological analysis in graftless maxillary sinus lift

PubMed Central

2017-01-01

Maxillary sinus lift for dental implant installation is a well-known and versatile technique; new techniques are presented based on the physiology of intrasinus bone repair. The aim of this review was to determine the status of graftless maxillary sinus lift and analyze its foundations and results. A search was conducted of the literature between 1995 and 2015 in the Medline, ScienceDirect, and SciELO databases using the keywords “maxillary sinus lift,” “blood clot,” “graftless maxillary sinus augmentation,” and “dental implant placement.” Ten articles were selected for our analysis of this technique and its results. Despite the limited information, cases that were followed for at least six months and up to four years had a 90% success rate. Published techniques included a lateral window, elevation of the sinus membrane, drilling and dental implant installation, descent of the membrane with variations in the installation of the lateral wall access and suturing. The physiology behind this new bone formation response and the results of the present research were also discussed. We concluded that this is a promising and viable technique under certain inclusion criteria. PMID:28875135

Endodontic-periodontal management of two rooted maxillary lateral incisor associated with complex radicular lingual groove by using spiral computed tomography as a diagnostic aid: a case report.

PubMed

Gandhi, A; Kathuria, A; Gandhi, T

2011-06-01

To present the successful endodontic and periodontal management of a two rooted maxillary lateral incisor tooth with a complex radicular lingual groove and severe periodontal destruction using spiral computed tomography as a diagnostic aid. A 30-year-old male patient presented with a chief complaint of mobility and discharge of pus in an upper front tooth. Clinical examination revealed a sinus tract on the labial gingival surface and a 10-mm-deep periodontal pocket associated with maxillary left lateral incisor tooth. On the lingual side, a groove emerging from cingulum, continuing mesioapically down the lingual aspect of tooth was found. Intraoral periapical radiographs demonstrated a lateral periodontal defect around the mesial aspect and a diffuse radiolucency at the apex of maxillary left lateral incisor tooth. The sinus tract was traced with gutta-percha to the maxillary left lateral incisor that showed an accessory root surrounded by a large radiolucent area. A spiral computed tomographic scan for better understanding of the complicated root canal morphology of the tooth was performed. Based on the clinical, radiographic and spiral computed tomographic findings, a diagnosis of an endo-perio lesion in tooth 22 was made. Management consisted of conventional root canal treatment, radiculoplasty, root resection of accessory root and surgical curettage of the periodontal defect. Follow-up with radiographic examination at 3 months and 1 year was performed. At 1-year recall, the patient was asymptomatic, there was no evidence of the sinus tract and a 3-mm nonbleeding pocket was present in relation to tooth 22. Progression of hard tissue healing was observed in the periapical radiograph taken 1 year postoperatively. The key to achieving favourable results in this particular type of developmental anomaly is accurate diagnosis and treatment planning. The health of the periapical osseous tissues appears to be the provital factor for tooth retention. A favourable outcome can only be achieved with a comprehensive treatment approach that effectively manages all local factors that are contributing to the disease process. © 2011 International Endodontic Journal.

Ultrasonic irrigation of a maxillary lateral incisor with perforation of the apical third of the root.

PubMed

Tsurumachi, Tamotsu; Takita, Toshiya; Hashimoto, Kazuhiro; Katoh, Takeshi; Ogiso, Bunnai

2010-12-01

We describe the successful use of a combination of nonsurgical root canal treatment and ultrasonic irrigation for collaborative management of a maxillary left lateral incisor with perforation of the apical third of the root. During the endodontic treatment procedure, the ultrasonically activated tip was used for intracanal irrigation. The area of perforation in the apical third of the root and the main root canal space were obturated with gutta-percha and root canal sealer, using a lateral condensation method. A follow-up clinical and radiographic examination at 5 years after treatment showed an asymptomatic tooth with excellent osseous healing.

An easy access to retrieve dental implants displaced into the maxillary sinus: the bony window technique.

PubMed

Biglioli, Federico; Chiapasco, Matteo

2014-12-01

To present the authors' experience concerning the removal of dental implants displaced in the maxillary sinus via an intraoral approach consisting of the creation of a bony window pedicled to the maxillary sinus membrane. Thirty-six systemically healthy patients, presenting with oral implants displaced into the maxillary sinus, but with no signs of acute or chronic sinusitis, were consecutively treated between 2002 and 2012 via an intraoral approach with the bony window technique. Removal of oral implants from the maxillary sinus was achieved in all patients, and postoperative recovery was uneventful in all of them. Computed tomographies performed after surgery showed no signs of residual sinus infection in all patients and a complete ossification of the bony window margins. Twelve of the 36 treated patients were treated with a sinus grafting procedure 12-18 months after in the same areas previously treated with the bone lid technique. Seventeen implants were placed in the grafted areas 6-9 months later and, after a further waiting period needed for osseointegration, the treated patients were rehabilitated with implant-supported prostheses. The survival rate of implants was 100%, and no complications related to the sinuses and implants were recorded. Results from this study seem to demonstrate that the bony window technique is a safe and easy way to remove oral implants from the maxillary sinus under local anesthesia. The surgical access is hardly visible 6-12 months after surgery, and maxillary sinuses appeared free from residual pathology in all treated patients. Finally, this procedure allows a second-stage sinus grafting procedure via a lateral approach as in a previously untreated maxillary sinus, thus allowing an implant-supported prosthetic restoration. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Long-term results of surgically-assisted maxillary protraction.

PubMed

Nevzatoğlu, Sirin; Küçükkeleş, Nazan

2014-05-01

The long-term treatment results of surgically-assisted facemask therapy were assessed by a comparison of the immediate protraction effects with those seen at five years review. Nine patients treated with a corticotomy-assisted maxillary protraction protocol were recalled five years following protraction. Cephalometric films taken before treatment (T0), immediately after maxillary protraction (T1) and five years after treatment (T2) were compared. The short-term results of surgically-assisted facemask therapy showed significant skeletal and soft tissue changes. After five years, the profile and dental relationships were well maintained and a cephalometric analysis revealed a stable vertical increase but only partially maintained soft tissue changes with loss of sagittal advancement. There was significant upper incisor proclination providing dental camouflage. Patients who are treated with corticotomy-assisted maxillary advancement should be very carefully selected. Assessment criteria include a low mandibular plane angle Class III patients who have severe maxillary retrognathism unable to be treated by conventional orthopaedic correction alone; patients who have almost completed growth and missed the chance of earlier orthopaedic correction, as well as patients who are not willing to accept bimaxillary orthognathic surgery, may be successfully treated.

Endoscopic contralateral transmaxillary approach for pterygoid process osteotomy in total maxillectomy: A technical case report.

PubMed

Hanazawa, Toyoyuki; Yamasaki, Kazuki; Chazono, Hideaki; Okamoto, Yoshitaka

2018-06-01

An approach for total maxillectomy with endoscopic transection of the pterygoid process via the contralateral maxillary sinus is described. In total maxillectomy, the resection of the pterygoid process of the sphenoid is a key step for successful resection. However, a conventional craniofacial approach requires extensive incision in the face, elevation of the lateral cheek flap. Even after elevation of the lateral cheek flap, visualization of this region is not good. An endoscopic approach through the contralateral maxillary sinus improved visualization of the pterygoid process, and osteotomy using a diamond-drilling bar was successfully performed. This technique has the potential to widen the indication for total maxillectomy in malignant neoplasms of the maxillary sinus. Copyright © 2017 Elsevier B.V. All rights reserved.

Maxillary canine impactions related to impacted central incisors: two case reports.

PubMed

Bayram, Mehmet; Ozer, Mete; Sener, Ismail

2007-09-01

The purpose of this case report is to describe the combined surgical and orthodontic treatment of two cases with an impacted maxillary central incisor and canine in the same quadrant and to discuss the causal relationship between them. The most common causes of canine impactions are usually the result of one or more factors such as a long path of eruption, tooth size-arch length discrepancies, abnormal position of the tooth bud, prolonged retention or early loss of the deciduous canine, trauma, the presence of an alveolar cleft, ankylosis, cystic or neoplastic formation, dilaceration of the root, supernumerary teeth, and odontomas. Although impaction of the maxillary central incisor is almost as prevalent as impacted canines its etiology is different. The principal factors involved in causing the anomaly are supernumerary teeth, odontomas, and trauma. Case #1: A 10.5-year-old girl in the early mixed dentition stage presented with a chief complaint of the appearance of her anterior teeth. She had a Class I skeletal pattern and a history of trauma to the maxillary central incisors at age five with premature exfoliation. Radiographs revealed an impacted upper right central incisor in the region of the nasal floor, delayed eruption of the maxillary permanent central incisor, and the adjacent lateral incisor was inclined toward the edentulous space. Treatment was done in two stages consisting of surgical exposure and traction of the impacted central incisor and fixed orthodontic treatment. Case #2: An 11.5-year-old girl presented for orthodontic treatment with the chief complaint of an unerupted tooth and the appearance of her upper anterior teeth. She was in the late mixed dentition period with a Class III skeletal pattern along with an anterior cross-bite with some maxillary transverse deficiency. The maxillary right canine and central incisor were absent, but the maxillary right deciduous canine was still present. Treatment included arch expansion followed by surgical exposure and traction of the impacted teeth and fixed orthodontic treatment. This case report provides some evidence of a significant environmental influence of an impacted maxillary central incisor on the path of eruption of the ipsilateral maxillary canine. When an impacted maxillary central incisor exists, the maxillary lateral incisor's root might be positioned distally into the path of eruption of the maxillary canine preventing its normal eruption. Ongoing assessment and early intervention might help to prevent such adverse situations from occurring.

Width/Length Ratio in Maxillary Anterior Teeth. Comparative Study of Esthetic Preferences among Professionals and Laypersons.

PubMed

Álvarez-Álvarez, Lorena; Orozco-Varo, Ana; Arroyo-Cruz, Gema; Jiménez-Castellanos, Emilio

2017-05-17

Many studies have examined the esthetic preferences of professionals in the maxillary anterior region; however, only a few have taken into account the ratios that are more frequent within the population or other ratios suggested in the literature as ideal. Previous studies also failed to compare them with the esthetic preferences of the lay population with regards to the smile. The purpose of this study is to highlight the differences when perceiving the esthetics of smiles between general dentists and laypersons, and linking them with the width/length of the maxillary anterior teeth. Photographs of the full face of a female subject were modified with Photoshop CS regarding the length/width relationships of the 6 maxillary anterior teeth. The three modifications made were: (a) 80% length/width, (b) 85%, length/width, and (c) 85% length/width in central incisors, 80% length/width in lateral incisors and canines. Three sequences of photograph pairs were created with different ratios and presented in PowerPoint to a sample of 100 general dentists and 100 laypersons. The ratio considered as the most esthetic by the majority of the judges was 85% for central incisors and 80% for lateral incisors and canines, with a statistically significant difference (p < 0.01). There was no statistically significant difference in the esthetic preferences of the studied populations either due to gender or professional experience of the dentists (p > 0.01). According to the results obtained in this study, professionals and laypersons considered a width/length ratio of 85% for maxillary central incisors and 80% for lateral incisors and canines as the most esthetic for maxillary anterior teeth. These results do not support findings from other studies previously published with similar ratios in central incisors, lateral incisors, and canines. Today clinicians practice in a treatment environment where not only function and utility but also esthetics is demanded in almost every procedure. Restoring/maintaining function is considered essential in any restorative dentistry treatment, but the esthetic aspects of any treatment should never be forgotten. This study was motivated by the increasing importance of obtaining a better appreciation of the perception of smile beauty, and of the role of maxillary teeth width/length ratio on the perception of dental esthetics. © 2017 by the American College of Prosthodontists.

Bilateral cross-bite treated by repeated rapid maxillary expansions: a 17-year follow-up case.

PubMed

Cozzani, M; Mazzotta, L; Caprioglio, A

2014-07-01

The objective of this paper is to show the clinical results after the repeated application of a Haas expander for rapid maxillary expansion (RME) anchored onto deciduous teeth in a 7-year-old patient that presented bilateral cross-bite, superior crowding and no space for permanent lateral incisors eruption. A first Haas expander was applied to the patient. She was told to activate it once a day, each activation was equal to 0.20 mm. After the first RME, the bilateral cross-bite was solved but still there was not enough space for lateral incisor eruption. A second and then a third Haas expander were applied, with the same activation protocol as the first one, in order to gain space in the anterior region and to achieve proper eruption of the lateral incisors. The patient was then treated with fixed appliances. At debonding the patient presented well aligned arch-forms: space for lateral incisor eruption was gained and superior crowding was solved. Bilateral cross-bite was also corrected. She was seen again 10 years and 17 years after expansions: she showed no relapse and presented a good functional occlusion that had remained stable, and an aesthetically pleasant smile, however she exhibited gingival recessions. Repeated rapid maxillary expansion, anchored onto deciduous teeth, performed in early mixed dentition represents a safe and successful treatment to correct severe bilateral cross- bites and to create space for maxillary incisor eruption.

Evaluation of maxillary anterior teeth and their relation to the golden proportion in Malaysian population.

PubMed

Al-Marzok, Maan Ibrahim; Majeed, Kais Raad Abdul; Ibrahim, Ibrahim Khalil

2013-01-24

The maxillary anterior teeth are important in achieving pleasing dental aesthetics. Various methods are used to measure the size and form of them, including the golden proportion between their perceived widths, and the width-to-height ratio, referred to as the golden standard. The purpose of this study was conducted to evaluate whether consistent relationships exist between tooth width and height of the clinical crown dimensions; and to investigate the occurrence of the golden proportion of the maxillary anterior teeth. Dental casts of the maxillary arches were made in this cross-sectional study from MAHSA University College students who met the inclusion criteria. The 49 participants represented the Malaysian population main ethnics. The dimensions of the anterior teeth and the perceived width of anterior teeth viewed from front were measured using a digital caliper. Comparison of the perceived width ratio of lateral to central incisor and canine to lateral incisor with the golden proportion of 0.618 revealed there were a significant statistical difference (p < 0.05). The statistical difference was significant for the width-to-height ratio of central incisors to the golden standard of 80%. There was no significant difference in the comparison among ethnic groups for the golden proportion and the golden standard. The golden proportion was not found to exist between the perceived widths of maxillary anterior teeth. No golden standard were detected for the width-to-height proportions of maxillary incisors. Specific population characteristics and perception of beauty must be considered. However, ethnicity has no association with the proportions of maxillary anterior teeth.

Conservative treatment of an ankylosed tooth after delayed replantation: a case report.

PubMed

Díaz, Jaime Andrés; Sandoval, Hector Paulo; Pineda, Patricia Irene; Junod, Pablo Antonio

2007-10-01

An 8-year-old boy sustained avulsion of his upper right maxillary central incisor and lateral luxation of his upper left maxillary incisors. Subsequently, the upper right maxillary central incisor developed replacement resorption, and both upper left maxillary incisors developed pulpal canal obliteration. In the ankylosed tooth, decoronation procedure was performed, and in the 44-month follow-up period the involved alveolar site showed vertical apposition of bone and continuing replacement resorption. Decoronation is a surgical procedure that allows preservation of the bone volume for the future, avoiding aesthetic disturbances and more aggressive treatments in cases where other therapeutic alternatives are not feasible.

Five years experience with a new intraoral maxillary distraction device (RID).

PubMed

Picard, Arnaud; Diner, Patrick A; Galliani, Eva; Tomat, Catherine; Vazquez, Ma rie Paule; Carls, Friedrich P

2011-10-01

Maxillary distraction osteogenesis is well established for the treatment of severe retromaxilla. We report our experience since 2004 of the treatment of 19 patients using a new intraoral maxillary distraction device. Maxillary advancement was successful in all patients with mean advancement of 9.6mm (range 4-17) measured at a point in lateral cephalograms. The new device limited surgical exposure and the amount of materials implanted, and improved control in every phase of the distraction. It was psychologically accepted by patients and was more comfortable than existing devices. Copyright © 2010 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Skeletal response to maxillary protraction with and without maxillary expansion: a finite element study.

PubMed

Gautam, Pawan; Valiathan, Ashima; Adhikari, Raviraj

2009-06-01

The purpose of this finite element study was to evaluate biomechanically 2 treatment modalities-maxillary protraction alone and in combination with maxillary expansion-by comparing the displacement of various craniofacial structures. Two 3-dimensional analytical models were developed from sequential computed tomography scan images taken at 2.5-mm intervals of a dry young skull. AutoCAD software (2004 version, Autodesk, San Rafael, Calif) and ANSYS software (version 10, Belcan Engineering Group, Cincinnati, Ohio) were used. The model consisted of 108,799 solid 10 node 92 elements, 193,633 nodes, and 580,899 degrees of freedom. In the first model, maxillary protraction forces were simulated by applying 1 kg of anterior force 30 degrees downward to the palatal plane. In the second model, a 4-mm midpalatal suture opening and maxillary protraction were simulated. Forward displacement of the nasomaxillary complex with upward and forward rotation was observed with maxillary protraction alone. No rotational tendency was noted when protraction was carried out with 4 mm of transverse expansion. A tendency for anterior maxillary constriction after maxillary protraction was evident. The amounts of displacement in the frontal, vertical, and lateral directions with midpalatal suture opening were greater compared with no opening of the midpalatal suture. The forward and downward displacements of the nasomaxillary complex with maxillary protraction and maxillary expansion more closely approximated the natural growth direction of the maxilla. Displacements of craniofacial structures were more favorable for the treatment of skeletal Class III maxillary retrognathia when maxillary protraction was used with maxillary expansion. Hence, biomechanically, maxillary protraction combined with maxillary expansion appears to be a superior treatment modality for the treatment of maxillary retrognathia than maxillary protraction alone.

A nonsurgical endodontic treatment in open-apex and immature teeth affected by dens invaginatus: using a collagen membrane as an apical barrier.

PubMed

Gharechahi, Maryam; Ghoddusi, Jamileh

2012-02-01

The authors' objective in this case report is to demonstrate an effective nonsurgical endodontic treatment in open-apex teeth affected by dens invaginatus (DI) by using a collagen membrane as an apical barrier and using a mineral trioxide aggregate (MTA) apical plug. . The authors present two cases of DI with open apexes in maxillary lateral incisors. In the first case, an adolescent had bilateral Oehlers type II DI and extensive periradicular radiolucency, internal root resorption and a vestibular fistula in the left maxillary lateral incisor. In the second case, an adult had Oehlers type II DI and an incomplete apex in the left maxillary lateral incisor. For both patients, the clinician placed a collagen membrane through the apexes of the left maxillary incisors to provide a resorbable extraradicular barrier against which MTA cement could be packed. The clinician obturated the adolescent's right lateral incisor. In the adolescent, the vestibular sinus tract was closed after one week. At subsequent follow-up examinations, the periradicular regions were completely healed, and postoperative radiographs revealed good bone healing in the lateral incisors. The teeth were asymptomatic and healing was achieved without any need for further endodontic surgical intervention. In the adult patient, the tooth was symptom free after one week, and radiography performed six months after the procedure showed complete healing. and Despite complex anatomy and diagnoses of DI and open apexes, both patients successfully underwent nonsurgical endodontic treatment involving the use of a collagen membrane and an MTA apical plug. Using an extraradicular barrier clinically can help improve the adaptation of MTA in the apexes of open-apex teeth to achieve a complete seal.

Age estimation using development of third molars in South Indian population: A radiological study.

PubMed

Priyadharshini, K Indra; Idiculla, Jose Joy; Sivapathasundaram, B; Mohanbabu, V; Augustine, Dominic; Patil, Shankargouda

2015-05-01

To assess the estimation of chronological age based on the stages of third molar development following the eight stages (A-H) method of Demirjian et al. in Chennai population of South India. A sample consisting of 848 individuals (471 males and 377 females) aged between 14 and 30 years was randomly selected for the clinical evaluation and 323 orthopantomograms with clinically missing third molars were taken for radiological evaluation using Demirjian's method from a Chennai population of known chronological age and sex. Statistical analysis was performed using Pearson's Chi-square test and mean values were compared between the study groups using t-test or analysis of variance (ANOVA) followed by Tukey's highly significant difference (HSD). In the present study, P < 0.05 was considered as the level of significance. The results showed that the mean age of having clinically completely erupted maxillary third molars was 22.41 years in male subjects and 23.81 years in female subjects and that of mandibular third molars was 21.49 years in male subjects and 23.34 years in female subjects. Mandibular third molars were clinically missing more often in females than in males. Eruption of mandibular third molars was generally ahead of the emergence of maxillary third molars into the oral cavity. Third molar development between male and female subjects showed statistically significant differences at calcification stage F and stage G in maxillary third molars and stage F in mandibular third molars (P < 0.05). There are differences indicating that maxillary and mandibular third molar eruption reached Demirjian's formation stages earlier in males than in females. It is suggested that in future studies, to increase the accuracy of age determination, indications of sexual maturity and ossification should also be evaluated in addition to third molar mineralization.

A Rare Occurrence of Geminated-Taloned Maxillary Lateral Incisor

PubMed Central

Kayal, Vizhi G

2012-01-01

ABSTRACT The talon cusp is a developmental anomaly characterized by the presence of an accessory cusp like structure projecting from the cingulum area of the anterior teeth. Gemination is an anomaly caused by a single tooth germ that attempted to divide during its development. These developmental anomalies may cause clinical problems including esthetic impairment, pain, caries and tooth crowding. Co-occurrence of two anomalies in a teeth is rare. This paper presents an unusual case of talon cusp on geminated permanent lateral incisor. How to cite this article: Neeraja R, Kayal VG. A Rare Occurrence of Geminated-Taloned Maxillary Lateral Incisor. Int J Clin Pediatr Dent 2012;5(2):136-138. PMID:25206153

Severe root resorption resulting from orthodontic treatment: Prevalence and risk factors

PubMed Central

Maués, Caroline Pelagio Raick; do Nascimento, Rizomar Ramos; Vilella, Oswaldo de Vasconcellos

2015-01-01

OBJECTIVE: To assess the prevalence of severe external root resorption and its potential risk factors resulting from orthodontic treatment. METHODS: A randomly selected sample was used. It comprised conventional periapical radiographs taken in the same radiology center for maxillary and mandibular incisors before and after active orthodontic treatment of 129 patients, males and females, treated by means of the Standard Edgewise technique. Two examiners measured and defined root resorption according to the index proposed by Levander et al. The degree of external apical root resorption was registered defining resorption in four degrees of severity. To assess intra and inter-rater reproducibility, kappa coefficient was used. Chi-square test was used to assess the relationship between the amount of root resorption and patient's sex, dental arch (maxillary or mandibular), treatment with or without extractions, treatment duration, root apex stage (open or closed), root shape, as well as overjet and overbite at treatment onset. RESULTS: Maxillary central incisors had the highest percentage of severe root resorption, followed by maxillary lateral incisors and mandibular lateral incisors. Out of 959 teeth, 28 (2.9%) presented severe root resorption. The following risk factors were observed: anterior maxillary teeth, overjet greater than or equal to 5 mm at treatment onset, treatment with extractions, prolonged therapy, and degree of apex formation at treatment onset. CONCLUSION: This study showed that care must be taken in orthodontic treatment involving extractions, great retraction of maxillary incisors, prolonged therapy, and/or completely formed apex at orthodontic treatment onset. PMID:25741825

Severe root resorption resulting from orthodontic treatment: prevalence and risk factors.

PubMed

Maués, Caroline Pelagio Raick; do Nascimento, Rizomar Ramos; Vilella, Oswaldo de Vasconcellos

2015-01-01

To assess the prevalence of severe external root resorption and its potential risk factors resulting from orthodontic treatment. A randomly selected sample was used. It comprised conventional periapical radiographs taken in the same radiology center for maxillary and mandibular incisors before and after active orthodontic treatment of 129 patients, males and females, treated by means of the Standard Edgewise technique. Two examiners measured and defined root resorption according to the index proposed by Levander et al. The degree of external apical root resorption was registered defining resorption in four degrees of severity. To assess intra and inter-rater reproducibility, kappa coefficient was used. Chi-square test was used to assess the relationship between the amount of root resorption and patient's sex, dental arch (maxillary or mandibular), treatment with or without extractions, treatment duration, root apex stage (open or closed), root shape, as well as overjet and overbite at treatment onset. Maxillary central incisors had the highest percentage of severe root resorption, followed by maxillary lateral incisors and mandibular lateral incisors. Out of 959 teeth, 28 (2.9%) presented severe root resorption. The following risk factors were observed: anterior maxillary teeth, overjet greater than or equal to 5 mm at treatment onset, treatment with extractions, prolonged therapy, and degree of apex formation at treatment onset. This study showed that care must be taken in orthodontic treatment involving extractions, great retraction of maxillary incisors, prolonged therapy, and/or completely formed apex at orthodontic treatment onset.

Incisal Apical Root Resorption Evaluation after Low-Friction Orthodontic Treatment Using Two-Dimensional Radiographic Imaging and Trigonometric Correction.

PubMed

Savoldi, Fabio; Bonetti, Stefano; Dalessandri, Domenico; Mandelli, Gualtiero; Paganelli, Corrado

2015-11-01

Root resorption shall be taken into consideration during every orthodontic treatment, and it can be effected by the use of different techniques, such as the application of low friction mechanics. However, its routinely assessment on orthopantomography has limitations related to distortions and changes in dental inclination. The aim of this investigation was to evaluate the severity of apical root resorption of maxillary and mandibular incisors after low-friction orthodontic treatment, using the combination of panoramic and lateral radiographs, and applying a trigonometric correction. A hospital based Retrospective study at the orthodontic Department (Dental School, University of Brescia, Spedali Civili di Brescia, Brescia, Italy). Ninety-three subjects (53 females and 40 males; mean age, 14 years) with mild teeth crowding were treated without extractions by the same operator using a low-friction fixed appliance following an integrated straight wire (ISW) protocol. The pre- and post-treatment tooth lengths of the maxillary and mandibular incisors were measured on panoramic radiographs. A trigonometric factor of correction for the pre-treatment length was calculated based on the difference between the pre and post-treatment incisal inclination on lateral cephalograms. The changes in lengths were investigated using the Student's t-test for paired values (p<0.05). Maxillary central incisors showed no changes (0.3%, 0.6%), maxillary lateral incisors showed a small increase (1.4%, 1.8%) that was attributed to the completion of root development in younger patients, mandibular central and lateral incisors underwent slight resorption (-3.1%, -3.4%). A statistically significant difference was found for the mandibular incisors but not for the maxillary ones. In patients with mild crowding and consequent low amount of root movement, a low-friction orthodontic treatment can lead to slight apical root resorption, mainly involving lower incisors. The use of a trigonometric correction in the panoramic radiograph analysis may reduce the limitations of this 2D evaluation.

Disturbances of dental development distinguish patients with oligodontia-ectodermal dysplasia from isolated oligodontia.

PubMed

Dhamo, B; Kuijpers, M A R; Balk-Leurs, I; Boxum, C; Wolvius, E B; Ongkosuwito, E M

2018-02-01

To investigate phenotypic differences in dental development between isolated oligodontia and oligodontia-ectodermal dysplasia (ED). A total of 129 patients diagnosed with isolated oligodontia and 22 patients with oligodontia as part of ED were eligible. The phenotype of dental development was assessed for the frequency of missing a certain tooth, dental age, development of each tooth present, abnormal size and abnormal shape of teeth. The data were analysed building linear, ordinal and logistic regression models. Compared to patients with isolated oligodontia, patients with oligodontia-ED missed more frequently central incisors and second molars in both jaws, and lateral incisors in the mandible (P < .05). Oligodontia-ED was associated with delayed development of the permanent dentition (β = -0.10; 95% CI: -0.17, -0.03). Specifically, the maxillary teeth: right central incisor, right lateral incisor, right second premolar and left second premolar were delayed approximately from 2 to 4 developmental stages. In addition, the left mandibular second premolar was 3 developmental stages delayed. Abnormal shape of teeth was 7 times more evident in patients with oligodontia-ED compared to patients with isolated oligodontia (OR = 6.54; 95% CI: 2.34, 18.28). The abnormal size of teeth was not a distinctive characteristic for oligodontia-ED. Oligodontia-ED distinguishes from isolated oligodontia by more disturbances in dental development. The abnormal shape of incisors and canines in a patient with oligodontia can raise suspicions for accompanying ectodermal abnormalities. © 2017 The Authors. Orthodontics & Craniofacial Research Published by John Wiley & Sons Ltd.

Impacted maxillary canines and root resorption of adjacent teeth: A retrospective observational study.

PubMed

Guarnieri, R; Cavallini, C; Vernucci, R; Vichi, M; Leonardi, R; Barbato, E

2016-11-01

The prevalence of impacted maxillary canine is reported to be between 1% and 3%. The lack of monitoring and the delay in the treatment of the impacted canine can cause different complications such as: displacement of adjacent teeth, loss of vitality of neighbouring teeth, shortening of the dental arch, follicular cysts, canine ankylosis, recurrent infections, recurrent pain, internal resorption of the canine and the adjacent teeth, external resorption of the canine and the adjacent teeth, combination of these factors. An appropriate diagnosis, accurate predictive analysis and early intervention are likely to prevent such undesirable effects. The objective is to evaluate, by means of a retrospective observational study, the possibility of carrying out a predictive analysis of root resorption adjacent to the impacted canines by means of orthopantomographs, so as to limit the prescription of additional 3D radiography. 120 subjects with unilateral or bilateral maxillary impacted canine were examined and 50 patients with 69 impacted maxillary canine (22 male, 28 female; mean age: 11.7 years) satisfied the inclusion criteria of the study. These patients were subjected to a basic clinical and radiographic investigation (orthopantomographs and computerized tomography). All panoramic films were viewed under standardized conditions for the evaluation of two main variables: maxillary canine angulations (a, b, g angles) and the overlapping between the impacted teeth and the lateral incisor (Analysis of Lindauer). Binary logistic regression was used to estimate the likelihood of resorbed lateral incisors depending on sector location and angle measurements. Results indicated that b angle has the greatest influence on the prediction of root resorption (predictive value of b angle = 76%). If β angle <18° and Lindauer = I, the probability of resorption is 0.06. Evaluation of b angle and superimposition lateral incisor/impacted canine analysed on orthopantomographs could be one of the evaluation criteria for prescribing second level examination (CT and CTCB) and for detecting root resorption of impacted maxillary canine adjacent teeth.

The History and Evolution of Internal Maxillary Artery Bypass.

PubMed

Wang, Long; Cai, Li; Lu, Shuaibin; Qian, Hai; Lawton, Michael T; Shi, Xiang'en

2018-05-01

Internal maxillary artery (IMA) bypass has gained momentum in the last 5 years for the treatment of complex cerebrovascular disorders and skull base tumors. However, some issues regarding this treatment modality have been proposed. As one of the most experienced neurosurgical teams to perform internal maxillary artery bypass in the world (>100 clinical cases), we reviewed the literature in aspects of basic anatomy of maxillary artery with its variations to the lateral pterygoid muscle, initial anastomosis modalities, and subsequent exposure techniques in cadaver studies, preoperative arterial evaluation methods, optimal interposed graft selections, and surgical outcome in the management of complex aneurysms, skull base tumors, and steno-occlusive disorders. Copyright © 2018 Elsevier Inc. All rights reserved.

Do different vertical positions of maxillary central incisors influence smile esthetics perception?

PubMed

Menezes, Erica Bretas Cabral; Bittencourt, Marcos Alan Vieira; Machado, Andre Wilson

2017-01-01

The purpose of this study was to determine the perception of smile esthetics among orthodontists and layperson, with respect to different maxillary central incisors vertical positions in full-face and close-up smile analyses. Frontal photographs of the smiles of two adult women were used. Images were altered to create a symmetrical image with the gingival margin levels of the maxillary canines matching the central incisors and a 1.0-mm central-to-lateral incisal step. Later, the images were altered in order to create six different central incisor vertical positions in 0.5-mm increments. The images were randomly assembled in an album, which was given to 114 judges, 57 orthodontists and 57 laypersons, who were asked to evaluate the attractiveness of the images using the visual analog scale. The data collected were statistically analyzed by means of 1-way analysis of variance with the Tukey post-hoc test and the Student t test. The highest rated smiles showed two notable characteristics: a) the central incisor gingival margins matched or were 0.5 mm below the line of the canine gingival margins and; b) the central-to-lateral incisal step was 1.0 to 1.5 mm. The worst smiles showed two notable characteristics: a) the central incisor gingival margins were 1.0 mm above or 1.5 mm below the canine gingival margins and; b) no step between the centrals and laterals or a 2.5-mm step. The vertical position of the maxillary central incisors significantly affected the perception of the smile esthetics, whereas slightly extruded central incisors were more esthetically preferred than intruded.

Schneider Membrane Elevation in Presence of Sinus Septa: Anatomic Features and Surgical Management

PubMed Central

Beretta, Mario; Cicciù, Marco; Bramanti, Ennio; Maiorana, Carlo

2012-01-01

Maxillary sinus floor elevation via a lateral approach is a predictable technique to increase bone volume of the edentulous posterior maxilla and consequently for dental implants placement. The sinus floor is elevated and it can be augmented with either autologous or xenogeneic bone grafts following an opening bone window created on the facial buccal wall. Maxillary septa are walls of cortical bone within the maxillary sinus. The septa shape has been described as an inverted gothic arch arising from the inferior or lateral walls of the sinus and may even divide the sinus into two or more cavities. Some authors have reported a higher prevalence of septa in atrophic edentulous areas than in nonatrophic ones. Radiographic identification of these structures is important in order to perform the right design of the lateral window during sinus lift. Aim of this investigation is to highlight the correct steps for doing sinus lift surgery in presence of those anatomic variations. Clinicians should always perform clinical and radiographic diagnosis in order to avoid complications related to the sinus lift surgery. PMID:22848223

Tissue engineering for lateral ridge augmentation with recombinant human bone morphogenetic protein 2 combination therapy: a case report.

PubMed

Mandelaris, George A; Spagnoli, Daniel B; Rosenfeld, Alan L; McKee, James; Lu, Mei

2015-01-01

This case report describes a tissue-engineered reconstruction with recombinant human bone morphogenetic protein 2/acellular collagen sponge (rhBMP-2/ ACS) + cancellous allograft and space maintenance via Medpor Contain mesh in the treatment of a patient requiring maxillary and mandibular horizontal ridge augmentation to enable implant placement. The patient underwent a previously unsuccessful corticocancellous bone graft at these sites. Multiple and contiguous sites in the maxilla and in the mandibular anterior, demonstrating advanced lateral ridge deficiencies, were managed using a tissue engineering approach as an alternative to autogenous bone harvesting. Four maxillary and three mandibular implants were placed 9 and 10 months, respectively, after tissue engineering reconstruction, and all were functioning successfully after 24 months of follow-up. Histomorphometric analysis of a bone core obtained at the time of the maxillary implant placement demonstrated a mean of 76.1% new vital bone formation, 22.2% marrow/cells, and 1.7% residual graft tissue. Tissue engineering for lateral ridge augmentation with combination therapy requires further research to determine predictability and limitations.

Apical root resorption of incisors after orthodontic treatment of impacted maxillary canines: a radiographic study.

PubMed

Brusveen, Elin Marie Gravdal; Brudvik, Pongsri; Bøe, Olav Egil; Mavragani, Maria

2012-04-01

The purpose of the study was to evaluate impacted maxillary canines as risk factor for orthodontic apical root resorption. The sample comprised 66 patients treated with fixed appliances. Thirty-two patients with a unilateral impacted maxillary canine, which was distanced from the roots of the incisors at a preliminary phase of treatment before bonding, formed the impaction group, and 34 patients without impactions served as the controls. Root shortening was calculated by using pretreatment and posttreatment intraoral radiographs. Inclination of the eruption path of the impacted canine relative to the midline, axis of the lateral incisor, and nasal line, root development, and the medial and vertical positions of the impacted tooth were recorded on orthopantomograms and lateral cephalometric films. The follicle/tooth ratio was evaluated by using periapical radiographs. No significant difference in apical resorption of the maxillary incisors was detected between the impaction and control groups, or between the incisors of the impacted and contralateral sides in the same subject. Likewise, no difference in the severity of root resorption was found between the incisors of impacted side alone and the incisors of the control group. Mesial and vertical inclinations of the impacted canines were negatively related to a lateral incisor's root resorption. No correlations were found between resorption and medial or vertical position of the crown of the canine. The follicle/tooth ratio was significantly related to the mesial inclination of the impacted canine, but not to root resorption. An impacted maxillary canine, after being distanced from the incisor roots, does not seem to be a risk factor for apical root resorption during orthodontic treatment. Copyright © 2012 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Maxillary unicystic ameloblastoma: a case report.

PubMed

Agani, Zana; Hamiti-Krasniqi, Vjosa; Recica, Jehona; Loxha, Mergime Prekazi; Kurshumliu, Fisnik; Rexhepi, Aida

2016-10-18

Ameloblastoma is a benign epithelial odontogenic tumor. It is often aggressive and destructive, with the capacity to attain great size, erode bone and invade adjacent structures. Unicystic ameloblastoma is a rare odontogenic lesion, with clinical, radiographic and gross features of jaw cysts. The lesion histologically shows typical ameloblastomatous epithelium lining part of the cyst cavity with or without and/or mural tumor growth. Unicystic ameloblastoma usually presents in posterior mandibular ramus region, while it is rare and atypical in posterior maxillary region. . We report a case of 16 year old Kosovar male, Albanian ethnicity, who presented with a swelling located in right maxillary region. Clinical examination revealed a painless swelling extending from the maxillary right central incisor to the maxillary right first molar tooth. Panoramic radiograph disclosed a well corticated unilocular radiolucent lesion approximately 5 × 5 cm in diameter which was in contact with the roots of the teeth present inferiorly and with the maxillary sinus superiorly. Maxillary right canine impaction was noted and unerupted lateral incisor tooth was present inside the radiolucency. Preoperative diagnosis of the lesion was made as dentigerous cyst based on the age of the patient, location of the swelling, clinical and radiographic findings, but the unicystic ameloblastoma was also taken into consideration. The patient was treated by surgical enucleation of the lesion and extraction of lateral incisor tooth which was present inside the lesion. The histopathological examination of the lesion revealed confirmed finding for unicystic ameloblastoma mural form. No recurrence was observed in 1 year follow-up. Maxillary region is considered a rare and atypical location for unicystic ameloblastoma. We emphasize the importance of differential diagnosis of an odontogenic lesion with common clinical and radiological features that will impact the treatment planning and follow up. As oral health providers we should be aware that the unilocular radiolucencies may be unicystic ameloblastoma.

Treatment effects of quad-helix on the eruption pattern of maxillary second molars.

PubMed

Kobayashi, Yoshiki; Shundo, Isao; Endo, Toshiya

2012-07-01

To evaluate the effects of quad-helix treatment on the eruption pattern of maxillary second molars in patients with maxillary incisor crowding. The lateral cephalograms of 40 consecutively treated patients in the early mixed-dentition group (treatment group) were examined in comparison with those of the same number of untreated patients with a similar form of malocclusion (control group). The cephalograms of the treated patients were taken at the start (T0) and at the end (T1) of treatment, and those of the untreated patients were also taken at about the same time as T0 and T1. The mean ages at T0 and T1 in the two groups were about the same. Distal tipping and movement and impeded extrusion of the maxillary first molars were notable in the treatment group compared with the control group. The actual treatment changes with the use of the quad-helix found expression in distal tipping and impeded vertical eruption of maxillary second molars. The more the maxillary first molars were tipped distally and the less the maxillary first molars extruded, the more the vertical eruption of the maxillary second molars was impeded. Quad-helix treatment gives rise to spontaneous distal tipping and impeded vertical eruption of the maxillary second molars.

The Palatal Window for Treating an Incompletely Augmented Maxillary Sinus.

PubMed

Florio, Salvatore; Suzuki, Takanori; Cho, Sang-Choon

2017-04-01

Maxillary sinus augmentation through a lateral window is reported as one of the most predictable bone augmentation procedures before implant placement. The elevation of the membrane represents a delicate and crucial step that allows the creation of the space for the bone graft material. If the elevation is not completed, the regenerated bone might be inadequate for the implant placement. In this case, a new intervention will be necessary to complete the bone augmentation. Reaccessing from a lateral window, however, would be challenging due to thickness of the buccal boney wall because of the first grafting procedure; therefore, a different approach has to be used. The aim of this case report is to present the palatal window technique for treating incompletely augmented maxillary sinus. The detailed step-by-step diagnostic and surgical procedures are described, and the advantages and limitations of the technique are discussed through a review of the literature.

Effect of maxillary distraction osteogenesis on velopharyngeal function: a pilot study.

PubMed

Harada, Kiyoshi; Ishii, Yoshimasa; Ishii, Masatoshi; Imaizumi, Humiko; Mibu, Michiko; Omura, Ken

2002-05-01

The purpose of this study was to examine preoperative and postoperative changes of velopharyngeal function in cleft patients who underwent maxillary distraction osteogenesis using the Rigid External Distraction System. Six cleft patients followed for a minimum of 12 months after maxillary distraction were examined. Plain and contrast lateral-cephalograms were obtained preoperatively and postoperatively, and speech evaluation was performed by the same authorized speech therapist at the same time points. The mean distraction amount at the anterior nasal spine was 11.7 mm (range, 7.4 mm - 15.0 mm). Both the nasopharyngeal depth and velar length increased after maxillary distraction, but the need ratio (nasopharyngeal depth/velar length) also increased after distraction. Although scores for velopharyngeal closure dropped a few points after maxillary distraction, the rating for hypernasality remained unchanged in all patients but the patient whose distraction amount was 15.0 mm. These results suggest that maxillary distraction of less than 15 mm may not markedly affect velopharyngeal function in cleft patients.

Exophthalmos associated to orbital zygomatic mucocele and complex maxillary malformation in a puppy

PubMed Central

Cirla, Alessandro; Rondena, Marco; Bertolini, Giovanna; Barsotti, Giovanni

2017-01-01

A case of exophthalmos due to zygomatic mucocele in a puppy with ipsilateral segmental maxillary atrophy is reported. A 7-month-old, mixed breed, male dog suffered the sudden-onset of unilateral painful exophthalmos and a gradual swelling of the right temporal region. A compressing, right retrobulbar mass was observed by ultrasound. Computed tomography revealed a large multiloculated cyst-like lesion of the right zygomatic gland projecting into the orbital space, thus displacing the eyeball. The ipsilateral molar part of the maxillary bone was underdeveloped, besides showing crowded, abnormal, multiple, unerupted maxillary molar teeth in the caudal maxillary region. Modified lateral orbitotomy and a selective caudal maxillary bone access were performed. The cyst-like lesion was removed and the zygomatic gland and the wall was collected for histology, which confirmed the mucocele. Clinical and imaging examinations six months after surgery showed neither recurrence of the mucocele nor ocular abnormalities. A possible common pathogenic mechanism involving these two conditions could be hypothesized. PMID:28884074

Conservative Management of Dens Evaginatus: Report of Two Unusual Cases

PubMed Central

Vijaykumar, S; Tenny, J; Ravi, GR

2010-01-01

ABSTRACT Dens evaginatus (DE) is a rare developmental anomaly characterized by presence of an extra cusp arising from occlusal or lingual surfaces. Isolated occurrence or concomitant presence of DE with other dental anomalies has been reported. DE commonly affects permanent teeth and is rarely seen in primary dentition. Treatment may be conservative or radical. This article presents two unusual cases of concomitant occurrence of a supernumerary tooth and DE affecting maxillary deciduous lateral incisor and conservative management of DE occurring concurrently with a possible Oehler’s type I invagination in maxillary permanent lateral incisor. PMID:27507925

Early headgear effects on the eruption pattern of the maxillary canines.

PubMed

Silvola, Anna-Sofia; Arvonen, Päivi; Julku, Johanna; Lähdesmäki, Raija; Kantomaa, Tuomo; Pirttiniemi, Pertti

2009-05-01

To test the null hypothesis that early headgear (HG) treatment has no effect on the eruption pattern of the maxillary canines in the early mixed dentition. Sixty-eight children (40 boys and 28 girls) with a Class II tendency in occlusion and moderate crowding of the dental arches were randomized into two groups. HG treatment was initiated immediately in the first group. In the second group only minor interceptive procedures were performed during the first follow-up period of 2 years. Orthopantomograms were taken at the baseline, three times at 1-year intervals, and after growth at the age of 16. Eruption geometry was performed. The space from the maxillary first molar to the lateral incisor was measured on the dental casts. The inclination of the maxillary canine in relation to the midline appeared to be significantly more vertically oriented on the right side in the HG group 1 and 2 years after starting the HG therapy (P = .0098 and P = .0003, respectively). The inclination in relation to the lateral incisors was smaller in the HG group bilaterally after 1 year and 2 years of HG treatment, and on the right side after 3 years of treatment. The hypothesis is rejected. Early HG treatment significantly affects the inclination of the maxillary canine during eruption. The strongest influence was seen after 2 years of HG use, more prominently in the right-side canine.

Piezoelectric surgery in maxillary sinus floor elevation with hydraulic pressure for xenograft and simultaneous implant placement.

PubMed

Li, Juanjuan; Lee, Kyungmo; Chen, Haohua; Ou, Guomin

2013-11-01

Because of the low bone quality in the posterior maxilla, edentulism in this area often results in a resorbed osseous structure and a pneumatized maxillary sinus, which makes dental implant surgery in the posterior maxilla a challenge. Two main surgical approaches are available for the sinus lift procedure: lateral and crestal. Improvement of the maxillary sinus floor elevation technique and increase in predictability are desirable. This article describes an innovative approach to maxillary sinus floor elevation with piezoelectric surgery and hydraulic pressure for xenograft and simultaneous implant placement in situations with insufficient residual alveolar bone. Copyright © 2013 Editorial Council for the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

The Use of Recombinant Human Platelet-Derived Growth Factor for Maxillary Sinus Augmentation.

PubMed

Kubota, Atsushi; Sarmiento, Hector; Alqahtani, Mohammed Saad; Llobell, Arturo; Fiorellini, Joseph P

The maxillary sinus augmentation procedure has become a predictable treatment to regenerate bone for implant placement. The purpose of this study was to evaluate the effect of recombinant human platelet-derived growth factor BB (rhPDGF-BB) combined with a deproteinized cancellous bovine bone graft for sinus augmentation. The lateral window approach was used for maxillary sinuses with minimal residual bone. After a healing period of 4 months, dental implants were placed and then restored following a 2-month osseointegration period. The result demonstrated increased bone height and ISQ values and a 100% survival rate. This study indicates that the addition of rhPDGF-BB to deproteinized cancellous bovine bone accelerated the healing period in maxillary sinuses with minimal native bone.

Do different vertical positions of maxillary central incisors influence smile esthetics perception?

PubMed Central

Menezes, Erica Bretas Cabral; Bittencourt, Marcos Alan Vieira; Machado, Andre Wilson

2017-01-01

ABSTRACT INTRODUCTION: The purpose of this study was to determine the perception of smile esthetics among orthodontists and layperson, with respect to different maxillary central incisors vertical positions in full-face and close-up smile analyses. METHODS: Frontal photographs of the smiles of two adult women were used. Images were altered to create a symmetrical image with the gingival margin levels of the maxillary canines matching the central incisors and a 1.0-mm central-to-lateral incisal step. Later, the images were altered in order to create six different central incisor vertical positions in 0.5-mm increments. The images were randomly assembled in an album, which was given to 114 judges, 57 orthodontists and 57 laypersons, who were asked to evaluate the attractiveness of the images using the visual analog scale. The data collected were statistically analyzed by means of 1-way analysis of variance with the Tukey post-hoc test and the Student t test. RESULTS: The highest rated smiles showed two notable characteristics: a) the central incisor gingival margins matched or were 0.5 mm below the line of the canine gingival margins and; b) the central-to-lateral incisal step was 1.0 to 1.5 mm. The worst smiles showed two notable characteristics: a) the central incisor gingival margins were 1.0 mm above or 1.5 mm below the canine gingival margins and; b) no step between the centrals and laterals or a 2.5-mm step. CONCLUSION: The vertical position of the maxillary central incisors significantly affected the perception of the smile esthetics, whereas slightly extruded central incisors were more esthetically preferred than intruded. PMID:28658361

Premaxillary-maxillary suture asymmetry in a juvenile Gorilla. Implications for understanding dentofacial growth and development.

PubMed

Schwartz, J H

1983-01-01

A specimen of juvenile gorilla was found that had the premaxillary-maxillary suture coursing between the lateral deciduous incisor and deciduous canine on one side of the jaw, but between the central and lateral deciduous incisors on the other; in the latter, the suture also separates the alveolus of the lateral deciduous incisor from the crypt of the growing successional lateral incisor. Rather than dismiss this exception to the traditional dictum of tooth identification--which is based on the position to teeth relative to this suture--as some inconsequential anomaly, an attempt is made to understand how this can occur within the confines of present understanding of dentofacial growth and development and developmental theory. An hypothesis relating tooth and tooth class identification is presented in the context of ectomesenchymally predifferentiated stem progenitors and subsequent tooth class proliferation.

Validity of palatal superimposition of 3-dimensional digital models in cases treated with rapid maxillary expansion and maxillary protraction headgear

PubMed Central

Choi, Jin-Il; Jost-Brinkmann, Paul-Georg; Choi, Dong-Soon; Jang, In-San

2012-01-01

Objective The purpose of this study was to evaluate the validity of the 3-dimensional (3D) superimposition method of digital models in patients who received treatment with rapid maxillary expansion (RME) and maxillary protraction headgear. Methods The material consisted of pre- and post-treatment maxillary dental casts and lateral cephalograms of 30 patients, who underwent RME and maxillary protraction headgear treatment. Digital models were superimposed using the palate as a reference area. The movement of the maxillary central incisor and the first molar was measured on superimposed cephalograms and 3D digital models. To determine whether any difference existed between the 2 measuring techniques, intra-class correlation (ICC) and Bland-Altman plots were analyzed. Results The measurements on the 3D digital models and cephalograms showed a very high correlation in the antero-posterior direction (ICC, 0.956 for central incisor and 0.941 for first molar) and a moderate correlation in the vertical direction (ICC, 0.748 for central incisor and 0.717 for first molar). Conclusions The 3D model superimposition method using the palate as a reference area is as clinically reliable for assessing antero-posterior tooth movement as cephalometric superimposition, even in cases treated with orthopedic appliances, such as RME and maxillary protraction headgear. PMID:23173116

Measurement of Distraction Force in Cleft Lip and Palate Patients During Le Fort I Maxillary Advancement With Rigid External Distraction.

PubMed

Sawada, Hiromi; Ogawa, Takuya; Kataoka, Keiichi; Baba, Yoshiyuki; Moriyama, Keiji

2017-03-01

Maxillary distraction osteogenesis (DO) is a mainstream surgical technique for patients who have severe maxillary hypoplasia associated with craniofacial syndromes and cleft-related deformities. However, limited information about the biomechanical aspects of maxillary DO is available limiting broad utilization and improvements to the procedure. The objective of this study was to analyze force levels during the active distraction process and to investigate the relationship between distraction force and maxillary movement during Le Fort I maxillary DO using a rigid external distraction (RED) system. Microtension gauges were integrated into the distraction wires on each side of the RED system. Six patients with cleft lip and palate aged 12.8 to 23.5 years underwent strain gauge measurements during maxillary advancement with DO using an RED system. Lateral cephalograms were taken to measure maxillary horizontal, vertical, and linear movements after DO. The average linear maxillary movement was 11.2 mm (range 8.5-15.9 mm). The applied forces ranged from 13.4 to 26.8 N. The distance of maxillary movement was proportional to the distraction force. The measurement of distraction forces during DO provides important information with which to establish appropriate protocols. Patients requiring more advancement may require more distraction force. However, other factors such as scarring, patient anatomy, surgical freedom of the osteotomized maxilla, and the like, may affect the required force during DO with the RED system.

Marker-free registration for the accurate integration of CT images and the subject's anatomy during navigation surgery of the maxillary sinus

PubMed Central

Kang, S-H; Kim, M-K; Kim, J-H; Park, H-K; Park, W

2012-01-01

Objective This study compared three marker-free registration methods that are applicable to a navigation system that can be used for maxillary sinus surgery, and evaluated the associated errors, with the aim of determining which registration method is the most applicable for operations that require accurate navigation. Methods The CT digital imaging and communications in medicine (DICOM) data of ten maxillary models in DICOM files were converted into stereolithography file format. All of the ten maxillofacial models were scanned three dimensionally using a light-based three-dimensional scanner. The methods applied for registration of the maxillofacial models utilized the tooth cusp, bony landmarks and maxillary sinus anterior wall area. The errors during registration were compared between the groups. Results There were differences between the three registration methods in the zygoma, sinus posterior wall, molar alveolar, premolar alveolar, lateral nasal aperture and the infraorbital areas. The error was smallest using the overlay method for the anterior wall of the maxillary sinus, and the difference was statistically significant. Conclusion The navigation error can be minimized by conducting registration using the anterior wall of the maxillary sinus during image-guided surgery of the maxillary sinus. PMID:22499127

Maxillary anterior ridge augmentation with recombinant human bone morphogenetic protein 2.

PubMed

Edmunds, Ryan K; Mealey, Brian L; Mills, Michael P; Thoma, Daniel S; Schoolfield, John; Cochran, David L; Mellonig, Jim

2014-01-01

No human studies exist on the use of recombinant human bone morphogenetic protein 2 (rhBMP-2) on an absorbable collagen sponge (ACS) as a sole graft material for lateral ridge augmentation in large ridge defect sites. This series evaluates the treatment outcome of maxillary anterior lateral ridge augmentation with rhBMP-2/ACS. Twenty patients were treated with rhBMP-2/ACS and fixation screws for space maintenance. Cone beam volumetric tomography measurements were used to determine gain in ridge width, and a bone core biopsy was obtained. The mean horizontal ridge gain was 1.2 mm across sites, and every site gained width.

Quantitation of maxillary remodeling. 2. Masking of remodeling effects when an "anatomical" method of superimposition is used in the absence of metallic implants.

PubMed

Baumrind, S; Korn, E L; Ben-Bassat, Y; West, E E

1987-06-01

We report the results of a study aimed at quantifying the differences in the perceived pattern of maxillary remodeling that are observed when different methods are used to superimpose maxillary images in roentgenographic cephalometrics. In a previous article, we reported cumulative changes in the positions of anterior nasal spine (ANS), posterior nasal spine (PNS), and Point A for a sample of 31 subjects with maxillary metallic implants. Measurements had been made on lateral cephalograms taken at annual intervals relative to superimposition on the implants. In the present article, we quantify the differences in the perceived displacement of the same landmarks in the same sample when a standard "anatomical best bit" rule was used in lieu of superimposition on the implants. The anatomical best fit superimposition as herein defined was found in this sample to lose important information on the downward remodeling of the superior surface of the maxilla that had been detected when the implant superimposition was used. In fact, we observed a small artifactual upward displacement of the ANS-PNS line. In the anteroposterior direction, the tendency toward backward displacement of skeletal landmarks through time that had been detected with the implant superimposition was replaced by a small forward displacement of ANS and Point A together with reduced backward displacement of PNS. To the extent that the implant superimposition is to be considered the true and correct one, the anatomical best fit superimposition appears to understate the true downward remodeling of the palate by an average of about 0.3 and 0.4 mm per year, although this value differs at different ages and timepoints. The anatomical best fit superimposition also misses entirely the small mean tendency toward backward remodeling that was observed when the implant superimposition was used. In situations in which there are no implants, clinicians and research workers must necessarily continue to use anatomically based superimpositions with definitions more or less similar to that of the anatomical best fit superimposition used here. When they do so, some systematic errors will be incurred. For grouped data, we believe that the best currently available estimates of the mean errors involved in using the anatomical best fit superimposition to approximate an implant superimposition are the "bias" values included in Table IIC. The secondary implications of these differences to the perceived displacements of the maxillary teeth will be considered in our next article.

Maxillary Sinus Dimensions Decrease as Age and Tooth Loss Increase.

PubMed

Velasco-Torres, Miguel; Padial-Molina, Miguel; Avila-Ortiz, Gustavo; García-Delgado, Raúl; OʼValle, Francisco; Catena, Andrés; Galindo-Moreno, Pablo

2017-04-01

To investigate the correlation between patient-dependent variables and dimensional variations of the maxillary sinus. In this cross-sectional study, a total of 394 individual cone-beam computed tomography scans were evaluated by one calibrated examiner to measure the total volume of the maxillary sinus, the distance between the medial and the lateral walls at 5, 10, and 15 mm vertically from the sinus floor, the height of septa (if present), and the height of the maxillary sinus cavity from both the alveolar crest and the sinus floor to the meatus. Recorded patient-dependent variables were age, gender, and edentulism status. Total maxillary sinus volume was significantly smaller in completely and partially edentulous patients than in dentate subjects. This finding was influenced by age, as older patients exhibited less volume, regardless of gender and edentulism status. Age showed an indirect correlation with the distance to the meatus, the sinus volume, and the mediolateral dimensions. Additionally, the prevalence of accessory meatus in this population was 29.19%. The dimensions of the maxillary sinus are influenced by age and edentulism status being reduced by aging and tooth loss.

How much incisor decompensation is achieved prior to orthognathic surgery?

PubMed

McNeil, Calum; McIntyre, Grant T; Laverick, Sean

2014-07-01

To quantify incisor decompensation in preparation for orthognathic surgery. Pre-treatment and pre-surgery lateral cephalograms for 86 patients who had combined orthodontic and orthognathic treatment were digitised using OPAL 2.1 [http://www.opalimage.co.uk]. To assess intra-observer reproducibility, 25 images were re-digitised one month later. Random and systematic error were assessed using the Dahlberg formula and a two-sample t-test, respectively. Differences in the proportions of cases where the maxillary (1100 +/- 60) or mandibular (900 +/- 60) incisors were fully decomensated were assessed using a Chi-square test (p<0.05). Mann-Whitney U tests were used to identify if there were any differences in the amount of net decompensation for maxillary and mandibular incisors between the Class II combined and Class III groups (p<0.05). Random and systematic error were less than 0.5 degrees and p<0.05, respectively. A greater proportion of cases had decompensated mandibular incisors (80%) than maxillary incisors (62%) and this difference was statistically significant (p=0.029). The amount of maxillary incisor decompensation in the Class II and Class III groups did not statistically differ (p=0.45) whereas the mandibular incisors in the Class III group underwent statistically significantly greater decompensation (p=0.02). Mandibular incisors were decompensated for a greater proportion of cases than maxillary incisors in preparation for orthognathic surgery. There was no difference in the amount of maxillary incisor decompensation between Class II and Class III cases. There was a greater net decompensation for mandibular incisors in Class III cases when compared to Class II cases. Key words:Decompensation, orthognathic, pre-surgical orthodontics, surgical-orthodontic.

Longitudinal eruptive and posteruptive tooth movements, studied on oblique and lateral cephalograms with implants.

PubMed

Zhang, Xiaoyun; Baumrind, Sheldon; Chen, Gui; Chen, Huizhong; Liang, Yi; Xu, Tianmin

2018-05-01

The purpose of this study was to investigate the eruptive and posteruptive tooth displacements of untreated growing subjects longitudinally and the potential connections between posteruptive displacement of the maxillary and mandibular first molars and skeletal facial growth. The sample comprised 11 series of right 45° oblique cephalograms and lateral cephalograms of untreated children with metallic implants of the Björk type obtained from the archives of a growth study. Cephalograms generated at approximately 2-year intervals between the ages of 8.5 and 16 years were selected and traced. Superimpositions of serial tracings of oblique cephalograms on stable intraosseous implants were made to determine the displacements of buccal segment teeth in both arches, and superimpositions of serial tracings of lateral cephalograms were used to evaluate growth of the jaws. Continuous mesial tipping of the maxillary molars was observed from 8.5 to 16 years of age, averaging 8.2° ± 5.5° for the first molars and 18.3°± 8.5° for the second molars. Compared with the maxillary molars, the mandibular first molars showed less change in angulation except in the later mixed dentition when more than half of the subjects had accelerated forward tipping of the first molar in the late mixed dentition associated with migration into the leeway space. Average amounts of cumulative eruption from 8.5 to 16 years of age were 12.1 ± 2.1 mm downward and 3.8 ± 1.7 mm forward for the maxillary first molar. The mandibular first molar showed 8.6 ± 2.3 mm of eruption and 4.4 ± 1.9 mm of mesial migration. Peak velocity of vertical eruption of the maxillary and mandibular first molars corresponded to the skeletal vertical growth spurt. The maxillary canines and first premolars showed remarkable and continuous uprighting migration during eruption, averaging 9.5° ± 5.0° and 10.5° ± 6.7°, respectively. However, when they erupted into the occlusion, their changes in angulation reverted to forward tipping. The same tendency was also found in the mandibular canines and first premolars. Remarkable eruption and migration occur to the teeth of both arches during childhood and adolescence. Rates of first molar eruption during adolescence follow the general pattern of somatic growth. We infer that maintaining the original distal crown angulation of the maxillary molars may be an effective protocol for preservation of anchorage. Copyright © 2018 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Special distraction osteogenesis before bone grafting for alveolar cleft defects to correct maxillary deformities in patients with bilateral cleft lips and palates: distraction osteogenesis performed separately for each bone segment.

PubMed

Mitsukawa, Nobuyuki; Saiga, Atsuomi; Morishita, Tadashi; Satoh, Kaneshige

2014-07-01

Patients with bilateral cleft lips and palates have premaxillary protrusion and characteristic jaw deformities involving three-dimensional malposition of the premaxilla and bilateral maxillary bone segments. This study examined patients with bilateral cleft lips and palates who had deviation and hypoplasia of the premaxillas and bilateral maxillary segments. Before bone grafting, the patients were treated with special distraction performed separately for each bone segment using a halo-type external device. This report describes this novel treatment method which produced good results. The subjects were five patients with severe jaw deformities due to bilateral cleft lip and palate. They were treated with maxillary Le Fort I osteotomy and subsequent distraction performed separately for each bone segment using a halo device. In three of five patients, premaxillary osteotomy was not performed, and osteotomy and distraction were performed only for the right and left lateral segments with severe hypoplasia. All patients achieved distraction close to the desired amount. The widths of the alveolar clefts were narrowed, and satisfactory occlusion and maxillary arch form were achieved. After the surgery, three of five patients underwent bone grafting for bilateral alveolar cleft defects and the bone graft survival was satisfactory. This method had many benefits, including narrowing of alveolar clefts, improvement of maxillary hypoplasia, and achievement of a good maxillary arch form. In addition, subsequent bone grafting for alveolar cleft defects was beneficial, dental prostheses were unnecessary, and frequency of surgery and surgical invasiveness were reduced. This method is a good surgical procedure that should be considered for patients with bilateral cleft lips and palates who have premaxillary protrusion and hypoplasia of the right and left lateral segments. Copyright © 2013 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Precision of a CAD/CAM-engineered surgical template based on a facebow for orthognathic surgery: an experiment with a rapid prototyping maxillary model.

PubMed

Lee, Jae-Won; Lim, Se-Ho; Kim, Moon-Key; Kang, Sang-Hoon

2015-12-01

We examined the precision of a computer-aided design/computer-aided manufacturing-engineered, manufactured, facebow-based surgical guide template (facebow wafer) by comparing it with a bite splint-type orthognathic computer-aided design/computer-aided manufacturing-engineered surgical guide template (bite wafer). We used 24 rapid prototyping (RP) models of the craniofacial skeleton with maxillary deformities. Twelve RP models each were used for the facebow wafer group and the bite wafer group (experimental group). Experimental maxillary orthognathic surgery was performed on the RP models of both groups. Errors were evaluated through comparisons with surgical simulations. We measured the minimum distances from 3 planes of reference to determine the vertical, lateral, and anteroposterior errors at specific measurement points. The measured errors were compared between experimental groups using a t test. There were significant intergroup differences in the lateral error when we compared the absolute values of the 3-D linear distance, as well as vertical, lateral, and anteroposterior errors between experimental groups. The bite wafer method exhibited little lateral error overall and little error in the anterior tooth region. The facebow wafer method exhibited very little vertical error in the posterior molar region. The clinical precision of the facebow wafer method did not significantly exceed that of the bite wafer method. Copyright © 2015 Elsevier Inc. All rights reserved.

Age estimation using development of third molars in South Indian population: A radiological study

PubMed Central

Priyadharshini, K. Indra; Idiculla, Jose Joy; Sivapathasundaram, B.; Mohanbabu, V.; Augustine, Dominic; Patil, Shankargouda

2015-01-01

Aim: To assess the estimation of chronological age based on the stages of third molar development following the eight stages (A–H) method of Demirjian et al. in Chennai population of South India. Materials and Methods: A sample consisting of 848 individuals (471 males and 377 females) aged between 14 and 30 years was randomly selected for the clinical evaluation and 323 orthopantomograms with clinically missing third molars were taken for radiological evaluation using Demirjian's method from a Chennai population of known chronological age and sex. Statistical analysis was performed using Pearson's Chi-square test and mean values were compared between the study groups using t-test or analysis of variance (ANOVA) followed by Tukey's highly significant difference (HSD). In the present study, P < 0.05 was considered as the level of significance. Results: The results showed that the mean age of having clinically completely erupted maxillary third molars was 22.41 years in male subjects and 23.81 years in female subjects and that of mandibular third molars was 21.49 years in male subjects and 23.34 years in female subjects. Mandibular third molars were clinically missing more often in females than in males. Eruption of mandibular third molars was generally ahead of the emergence of maxillary third molars into the oral cavity. Third molar development between male and female subjects showed statistically significant differences at calcification stage F and stage G in maxillary third molars and stage F in mandibular third molars (P < 0.05). Conclusion: There are differences indicating that maxillary and mandibular third molar eruption reached Demirjian's formation stages earlier in males than in females. It is suggested that in future studies, to increase the accuracy of age determination, indications of sexual maturity and ossification should also be evaluated in addition to third molar mineralization. PMID:25984465

European college of orthodontics: commission of affiliation and titularisation.

PubMed

Muller, Christine

2012-06-01

Date of birth: 28/4/1977; sex: female. A. (4/2006; 29 years). Tooth-arch discrepancy with bi-maxillary protrusion. Correction of bi-maxillary protrusion; avulsion of 15, 25, 35 and 45; fixed multi-bracket Incognito bi-maxillary appliance; mini-screw anchorage. B. POST-TREATMENT RECORDS DOCUMENTS: (9/2009; 32 years and 6 months). Permanent retainers using fixed upper and lower bonded wires. C. POST-RETENTION RECORDS: (7/2010; 33 years and 3 months). D. Reason for consultation: correction of crooked and "jutting" teeth. Extraoral examination: balanced facial levels; lateral view: predominant lower third; closed nasolabial angle; labial asymmetry with predominant lower lips. Endooral examination: young adult dentition; average dental status; large number of fillings; panorex confirms four devitalized teeth; good periodontal status; V-shaped upper arch with lingually ectopic 12 and 22; lower arch with slight incisor crowding; bi-lateral molar and canine Class I; crossbite of 12 and 22; 2-mm deepbite and 1-mm overjet. Copyright © 2012. Published by Elsevier Masson SAS.

Characteristics of Teeth: A Review of Size, Shape, Composition, and Appearance of Maxillary Anterior Teeth.

PubMed

McGowan, Steve

2016-03-01

Although digital technologies play an increasingly integral role in dentistry, there remains a need for dental professionals to understand the fundamentals of tooth anatomy, form, occlusion, and color science. In this article, the size, shape, composition, and appearance of maxillary anterior teeth will be discussed from esthetic and functional perspectives. A total of 600 extracted maxillary incisors were studied: 200 each of central incisors, lateral incisors, and cuspids. The purpose of the article is to exhibit and discuss factors that make teeth unique and diverse. Understanding these aspects of teeth aids dental professionals in more effectively creating realistic and highly esthetic restorations for patients.

Long-term follow-up of early cleft maxillary distraction.

PubMed

Park, Young-Wook; Kwon, Kwang-Jun; Kim, Min-Keun

2016-12-01

Most of cleft lip and palate patients have the esthetic and functional problems of midfacial deficiencies due to innate developmental tendency and scar tissues from repeated operations. In these cases, maxillary protraction is required for the harmonious facial esthetics and functional occlusion. A 7-year old boy had been diagnosed as severe maxillary constriction due to unilateral complete cleft lip and palate. The author tried to correct the secondary deformity by early distraction osteogenesis with the aim of avoiding marked psychological impact from peers of elementary school. From 1999 to 2006, repeated treatments, which consisted of Le Fort I osteotomy and face mask distraction, and complementary maxillary protraction using miniplates were performed including orthodontics. But, final facial profile was not satisfactory, which needs compromising surgery. The result of this study suggests that if early distraction treatment is performed before facial skeletal growth is completed, an orthognathic surgery or additional distraction may be needed later. Maxillofacial plastic and reconstructive surgeons should notify this point when they plan early distraction treatment for cleft maxillary deformity.

Dentoskeletal features in individuals with ectopic eruption of the permanent maxillary first molar

PubMed Central

Rozzi, Matteo; Cardoni, Giulia; Ricchiuti, Maria Rosaria; Cozza, Paola

2015-01-01

Objective The aim of the study was to analyze the prevalence and distribution of ectopic eruption of the permanent maxillary first molar (EEM) in individuals scheduled for orthodontic treatment and to investigate the association of EEM with dental characteristics, maxillary skeletal features, crowding, and other dental anomalies. Methods A total of 1,317 individuals were included and randomly divided into two groups. The first 265 subjects were included as controls, while the remaining 1,052 subjects included the sample from which the final experimental EEM group was derived. The mesiodistal (M-D) crown width of the deciduous maxillary second molar and permanent maxillary first molar, maxillary arch length (A-PML), maxillomandibular transverse skeletal relationships (anterior and posterior transverse interarch discrepancies, ATID and PTID), maxillary and mandibular tooth crowding, and the presence of dental anomalies were recorded for each subject, and the statistical significance of differences in these parameters between the EEM and control groups was determined using independent sample t-tests. Chi-square tests were used to compare the prevalence of other dental anomalies between the two groups. Results The prevalence of maxillary EEM was 2.5%. The M-D crown widths, ATID and PTID, and tooth crowding were significantly greater, while A-PML was significantly smaller, in the EEM group than in the control group. Only two subjects showed an association between EEM and maxillary lateral incisor anomalies, which included agenesis in one and microdontia in the other. Conclusions EEM may be a risk factor for maxillary arch constriction and severe tooth crowding. PMID:26258065

Comparative study of different osteotomy modalities in maxillary distraction osteogenesis for cleft lip and palate.

PubMed

Yu, Hongbo; Wang, Xudong; Fang, Bing; Shen, Steve Guofang

2012-11-01

Conventional maxillary distraction osteogenesis and anterior maxillary segmental distraction were applied in the treatment of severe maxillary hypoplasia secondary to cleft clip and palate. The aim of the present study was to compare the difference between these 2 osteotomy modalities used for rigid external distraction. Ten patients with severe maxillary hypoplasia secondary to CLP were enrolled in our study. They were randomly divided into 2 groups. Conventional maxillary distraction osteogenesis was performed in 5 patients and anterior maxillary segmental distraction in 5 patients. The preoperative and postoperative lateral cephalograms were compared, and cephalometric analysis was performed. The independent sample t test was used to evaluate the differences between the 2 groups. All patients healed uneventfully, and the maxillae moved forward satisfactorily. The sella-nasion-point A angles, nasion-point A-Frankfort horizontal plane angles, overjets, and 0-meridian to subnasale distances had increased significantly after distraction osteogenesis. Significant differences were found in the changes in palatal length between the 2 groups (P < .05). A mean increase of 7.50 mm in palatal length was found in the anterior maxillary segmental distraction group. No significant difference in the changes in palatopharyngeal depth or soft palatal length was found. With the ability of increasing the palatal and arch length, avoiding changes in palatopharyngeal depth, and preserving palatopharyngeal closure function, anterior maxillary segmental distraction has great value in the treatment of maxillary hypoplasia secondary to CLP. It is a promising and valuable technique in this potentially complicated procedure. Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Evaluation of long-term stability of skeletal anterior open bite correction in adults treated with maxillary posterior segment intrusion using zygomatic miniplates.

PubMed

Marzouk, Eiman S; Kassem, Hassan E

2016-07-01

This study evaluated the long-term stability of maxillary molar intrusion and anterior open-bite correction in adults treated by maxillary posterior teeth intrusion with zygomatic miniplates. The sample included 26 skeletal anterior open-bite patients, who had maxillary posterior segment intrusion with zygomatic miniplates. Lateral cephalograms were taken at pretreatment, posttreatment, 1 year posttreatment, and 4 years posttreatment. The mean maxillary molar intrusion was 3.04 mm (P ≤0.01), and the mean bite closure was 6.93 mm (P ≤0.01). The intruded maxillary molars relapsed by 10.20% in the first year after treatment and by 13.37% by 4 years after treatment. Overbite relapsed by 8.19% and 11.18% after 1 year and 4 years posttreatment, respectively. The first year after treatment accounted for 76.29% and 73.2% of the total relapses of molar intrusion and overbite, respectively. The 4-year posttreatment relapse amounts of maxillary molar intrusion and overbite were positively correlated with the amount of pretreatment maxillary molar height and the initial open-bite severity, respectively, but negatively correlated with the amounts of maxillary molar intrusion and open-bite correction gained by treatment. Molar intrusion with zygomatic miniplates appears to be stable 4 years after treatment. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Impact of the Distance of Maxillary Advancement on Horizontal Relapse After Orthognathic Surgery.

PubMed

Fahradyan, Artur; Wolfswinkel, Erik M; Clarke, Noreen; Park, Stephen; Tsuha, Michaela; Urata, Mark M; Hammoudeh, Jeffrey A; Yamashita, Dennis-Duke R

2018-04-01

The maxillary horizontal relapse following Le Fort I advancement has been estimated to be 10% to 50%. This retrospective review examines the direct association between the amounts of maxillary advancement and relapse. We hypothesize that the greater the advancement, the greater the relapse amount. Patients with class III skeletal malocclusion underwent maxillary advancement with either a Le Fort I or a Le Fort I with simultaneous mandibular setback (bimaxillary surgery) from 2008 to 2015. Patients were assessed for a history of cleft lip or cleft palate. Patients with known syndromes were excluded. Cephalometric analysis was performed to compare surgical and postsurgical changes. Of 136 patients, 47.1% were males and 61.8% had a history of cleft. The mean surgery age was 18.9 (13.8-23) years and 53.7% underwent a bimaxillary procedure. A representative subgroup of 35 patients had preoperative, immediate postoperative, and an average of 1-year postoperative lateral cephalograms taken. The mean maxillary advancement was 6.3 mm and the horizontal relapse was 1.8 mm, indicating a 28.6% relapse. A history of cleft and amount of maxillary advancement were directly correlated, whereas bone grafting of the maxillary osteotomy sites was inversely correlated with the amount of relapse ( P < .05). Our data suggest positive correlation between amount of maxillary advancement and horizontal relapse as well as a positive correlation between history of cleft and horizontal relapse. Bone grafting of the maxillary osteotomy sites has a protective effect on the relapse.

Differences between dentitions with palatally and labially located maxillary canines observed in incisor width, dental morphology and space conditions.

PubMed

Artmann, L; Larsen, H J; Sørensen, H B; Christensen, I J; Kjaer, I

2010-06-01

To analyze the interrelationship between incisor width, deviations in the dentition and available space in the dental arch in palatally and labially located maxillary ectopic canine cases. Size: On dental casts from 69 patients (mean age 13 years 6 months) the mesiodistal widths of each premolar, canine and incisor were measured and compared with normal standards. Dental deviations: Based on panoramic radiographs from the same patients the dentitions were grouped accordingly: Group I: normal morphology; Group IIa: deviations in the dentition within the maxillary incisors only; Group IIb: deviations in the dentition in general. Descriptive statistics for the tooth sizes and dental deviations were presented by the mean and 95% confidence limits for the mean and the p-value for the T-statistic. Space: Space was expresses by subtracting the total tooth sizes of incisors, canines and premolars from the length of the arch segments. Size of lateral maxillary incisor: The widths of the lateral incisors were significantly different in groups I, IIa and IIb (p=0.016) and in cases with labially located ectopic canines on average 0.65 (95% CI:0.25-1.05, p=0.0019) broader than lateral incisors in cases with palatally located ectopic canines. Space: Least available space was observed in cases with labially located canines. The linear model did show a difference between palatally and labially located ectopic canines (p=0.03). Space related to deviations in the dentition: When space in the dental arch was related to dental deviations (groups I, IIa and IIb), the cases in group IIb with palatally located canines had significantly more space compared with I and IIa. Two subgroups of palatally located ectopic maxillary canine cases based on registration of space, incisor width and deviations in the morphology of the dentition were identified.

The effects of alveolar bone loss and miniscrew position on initial tooth displacement during intrusion of the maxillary anterior teeth: Finite element analysis

PubMed Central

Cho, Sun-Mi; Choi, Sung-Hwan; Sung, Sang-Jin; Yu, Hyung-Seog

2016-01-01

Objective The aim of this study was to determine the optimal loading conditions for pure intrusion of the six maxillary anterior teeth with miniscrews according to alveolar bone loss. Methods A three-dimensional finite element model was created for a segment of the six anterior teeth, and the positions of the miniscrews and hooks were varied after setting the alveolar bone loss to 0, 2, or 4 mm. Under 100 g of intrusive force, initial displacement of the individual teeth in three directions and the degree of labial tilting were measured. Results The degree of labial tilting increased with reduced alveolar bone height under the same load. When a miniscrew was inserted between the two central incisors, the amounts of medial-lateral and anterior-posterior displacement of the central incisor were significantly greater than in the other conditions. When the miniscrews were inserted distally to the canines and an intrusion force was applied distal to the lateral incisors, the degree of labial tilting and the amounts of displacement of the six anterior teeth were the lowest, and the maximum von Mises stress was distributed evenly across all the teeth, regardless of the bone loss. Conclusions Initial tooth displacement similar to pure intrusion of the six maxillary anterior teeth was induced when miniscrews were inserted distal to the maxillary canines and an intrusion force was applied distal to the lateral incisors. In this condition, the maximum von Mises stresses were relatively evenly distributed across all the teeth, regardless of the bone loss. PMID:27668194

[Piezosurgery for surgically assisted rapid maxillary expansion under local anesthesia].

PubMed

Sun, Hao; Li, Biao; Sun, Hao; Liu, Zhixu; Wang, Xudong

2014-08-01

This study evaluates piezosurgery for surgically assisted rapid maxillary expansion (SARME) under local anesthesia. SARME was performed on adults with maxillary transverse deficiency under local anesthesia with a piezosurgical device. Fourteen patients (six males and eight females) underwent lateral maxillary osteotomies, midpalatal osteotomies, and bilateral pterygomaxillary disjunction. The feelings of patients during the operation were determined through questionnaires. All patients underwent SARME in the out-patient operating room. The surgical procedures were completed under local anesthesia. All patients exhibited satisfactory tolerance. Ultrasonic bone-cutting surgery was recently introduced as a feasible alternative to the conventional tools of cranio-maxillofacial surgery for its technical characteristics of precision and safety. The device used was unique in that cutting action occurred when the tool was employed on mineralized tissues, but stoped on soft tissues. The results of the questionnaires showed that eight (57.14%) patients felt a mild sensation of ultrasonic vibration, tweleve (85.7 1%) felt mild tolerable pain and tooth soreness during surgery, and eleven (78.57%) felt little fear and hardly heard the ultrasonic sound. Preoperative and postoperative six months later measurements showed an evident effect of expansion. Piezosurgery enabled patients to undergo all the steps of SARME under local anesthesia, but more cases and longer follow-up are needed to verif ' the results.

Combined treatment with headgear and the Frog appliance for maxillary molar distalization: a randomized controlled trial

PubMed Central

2013-01-01

Objective To evaluate the efficiency of the Frog appliance (FA) alone or in combination with headgear for distalizing the maxillary molars. Methods Fifty patients (25 males and 25 females) aged 12.6 - 16.7 years who received treatment for Class II malocclusion at the Orthodontic Clinic of Al-Baath University were selected for this study and randomly divided into 2 equal groups. Maxillary molar distalization was achieved using the FA alone (group 1) or a combination of the FA with high-pull headgear worn at night (group 2). Lateral cephalograms were obtained before and after treatment. Results The maxillary molars moved distally by 5.51 and 5.93 mm in groups 1 and 2, respectively. Distal movements were associated with axial tipping by 4.96° and 1.25°, and with loss of anchorage by mesial movement of the second maxillary premolars by 2.70 and 0.90 mm in groups 1 and 2, respectively. The combined use of the FA and nighttime high-pull headgear decreased the distalization time and improved the ratio of maxillary molar distalization movement relative to the overall opening space between the first maxillary molars and second premolars. Conclusions The FA can effectively distalize the maxillary molars, this distalization associates with some unfavorable changes. Nighttime use of high-pull headgear combined with the FA can reduce these unfavorable changes and improve treatment outcomes. PMID:23671835

Bilateral en-masse distalization of maxillary posterior teeth with skeletal anchorage: a case report

PubMed Central

Noorollahian, Saeed; Alavi, Shiva; Shirban, Farinaz

2016-01-01

ABSTRACT Objective: The aim of this study was to introduce a new method for bilateral distal movement of the entire maxillary posterior segment. Case report: A 17-year-old girl with Class I skeletal malocclusion (end-to-end molar relationships, deviated midline and space deficiency for left maxillary canine) was referred for orthodontic treatment. She did not accept maxillary first premolars extraction. A modified Hyrax appliance (Dentaurum Ispringen, Germany) was used for bilateral distalization of maxillary posterior teeth simultaneously. Expansion vector was set anteroposteriorly. Posterior legs of Hyrax were welded to first maxillary molar bands. All posterior teeth on each side consolidated with a segment of 0.017 × 0.025-in stainless steel wire from the buccal side. Anterior legs of Hyrax were bent into eyelet form and attached to the anterior palate with two mini-screws (2 × 10 mm) (Jeil Medical Corporation Seoul, South Korea). Hyrax opening rate was 0.8 mm per month. Lateral cephalometric radiographs were used to evaluate the extent of distal movement. 3.5-mm distalization of posterior maxillary teeth was achieved in five months. Results: A nearly bodily distal movement without anchorage loss was obtained. Conclusion: The mini-screw-supported modified Hyrax appliance was found to be helpful for achieving en-masse distal movement of maxillary posterior teeth. PMID:27409657

Soft Tissue Changes in Cleft Lip and Palate Patients: Anterior Maxillary Distraction versus Conventional Le-Fort I Osteotomy.

PubMed

Markose, Eldho; Paulose, Joby; Paul, Eldho T

2013-12-01

The purpose of the study was to compare the soft tissue changes after maxillary advancement in patients with maxillary deficiency associated with cleft lip and palate (CLP) by two approaches-anterior maxillary distraction (AMD) and advancement LeFort I osteotomy (ALO). Twenty patients with maxillary hypoplasia associated with cleft lip and palate who had undergone either LeFort I osteotomy or distraction osteogenesis with maxillary advancement were included in this study. Lateral cephalogram taken at various intervals of time were used to evaluate soft tissue and hard tissue changes over time. In both groups, vertical as well as horizontal changes in pronasale was well observed. A substantial increase in nasal parameters was noted in case of AMD group in comparison to ALO. Though maxillary advancement was evident in both the groups, a significant and consistent change was observed in AMD. Significant vertical and horizontal changes were seen with respect to subnasale and labrale superius in AMD group. Soft tissue as well as hard tissue relapse was greater in ALO group than AMD group. Significant soft tissue and hard tissue changes were clearly observed in both the groups, but the treatment results were more consistent in cases treated with AMD. Hence AMD could be considered as a better treatment of choice in cases of maxillary hypoplasia associated with cleft lip and palate.

The retention of pit and fissure sealants placed in primary school children by Dental Health Services, Victoria.

PubMed

Messer, L B; Calache, H; Morgan, M V

1997-08-01

The benefit of a public sector sealant programme for children in Australia is yet to be established. This study evaluated sealants placed by therapists of the School Dental Service in Victoria, between 1989 and 1994, on permanent teeth of children in 15 primary schools in Melbourne. Seven hundred and seventy four children aged 6-12 years were examined in school dental clinics by six calibrated examiners. A total of 5363 sealants placed on 2875 permanent teeth (including 2616 first molars, 91 per cent of sample) up to four and a half years previously was examined. Values for complete and partial sealant retention were highest for premolars (86 per cent, 9 per cent respectively, total 95 per cent); similar for occlusal surfaces of maxillary and mandibular first molars (63 per cent, 30 per cent; 62 per cent, 32 per cent respectively) and buccal pits of mandibular molars (66 per cent); and low for pits/fissures of Carabelli's cusps of maxillary molars (44 per cent). Cross-sectional examination up to 24 months for both maxillary and mandibular first molars indicated average values of 67 per cent complete retention, 27 per cent partial retention, 6 per cent missing; thereafter complete retention decreased and partial retention increased. Sealant failures in the six months post-placement were attributed to technique failure. Regardless of sealant retention, caries experience was low under partially retained or missing sealants (4.5 per cent) and completely retained sealants (0.4 per cent). It is concluded that the SDS sealant programme is a sound preventive dental public health approach.

Autotransplantation and Orthodontic Treatment after Maxillary Central Incisor Region Trauma: A 13-Year Follow-Up Case Report Study.

PubMed

Piroozmand, Farzad; Hessari, Hossein; Shirazi, Mohsen; Khazaei, Pegah

2018-01-01

The anterior maxilla is the most prone region to the trauma during childhood, and tooth loss sometimes happens due to trauma. Replacing the missing teeth has always been one of the dentists' challenges in children and adolescents, since their dentofacial growth is not complete. Autotransplantation of mandibular premolars with two-thirds or three-quarters of root formation provides the best prognosis for the tooth survival. This case report describes the management of a 10-year-old boy suffering a severe dental injury who received the autotransplantation of the premolars from mandible to restore the space caused by trauma in maxillary central incisor region and a 13-year follow-up of the autotransplantation.

Endodontic, surgical and periodontal treatment of dens invaginatus. Case report.

PubMed

Castellarin, M; Demitri, V; Politi, M

2001-01-01

The aim of this paper is to propose a single stage global treatment of endodontic, periapical and periodontal lesions in a lateral maxillary incisor with dens invaginatus. A 24 year-old woman presenting a lateral maxillary incisor with dens invaginatus in association with periapica1 and periodontal lesions underwent simultaneous surgical, endodontic and periodontal regenerative procedures. At 2, 6, 12, 18 months follow-up the radiographic healing appeared to be improved and the periapical lesion healed completely 1 year after surgical intervention. Surgery in association with endodontic and periodontal procedures represents the treatment of choice to maximize long term prognosis in cases of dens invaginatus with chronic periapical and periodontal lesions.

Nasopalatine duct cyst mimicking an endodontic periapical lesion: a case report.

PubMed

Bains, Rhythm; Verma, Promila; Chandra, Anil; Tikku, A P; Singh, Nimisha

2016-01-01

Lesions of nonendodontic origin, such as nasopalatine or globulomaxillary cysts, may mimic periapical radiolucencies associated with pulpal pathosis, and incorrect diagnosis may lead to unnecessary endodontic treatment. Horizontal root fractures most commonly affect the maxillary central and lateral incisors. Prognosis depends largely on the level of fracture; fractures in the apical third have the best prognosis, and those in the cervical third have the worst. This case report discusses surgical and restorative management of a patient who had a nasopalatine cyst that had been misdiagnosed and treated as an endodontic lesion of the maxillary right central incisor as well as a midroot horizontal fracture of the adjacent lateral incisor.

Dual odontogenic origins develop at the early stage of rat maxillary incisor development.

PubMed

Kriangkrai, Rungarun; Iseki, Sachiko; Eto, Kazuhiro; Chareonvit, Suconta

2006-03-01

Developmental process of rat maxillary incisor has been studied through histological analysis and investigation of tooth-related gene expression patterns at initial tooth development. The tooth-related genes studied here are fibroblast growth factor-8 (Fgf-8), pituitary homeobox gene-2 (Pitx-2), sonic hedgehog (Shh), muscle segment homeobox-1 (Msx-1), paired box-9 (Pax-9) and bone morphogenetic protein-4 (Bmp-4). The genes are expressed in oral epithelium and/or ectomesenchyme at the stage of epithelial thickening to the early bud stage of tooth development. Both the histological observation and tooth-related gene expression patterns during early stage of maxillary incisor development demonstrate that dual odontogenic origins aligned medio-laterally in the medial nasal process develop, subsequently only single functional maxillary incisor dental placode forms. The cascade of tooth-related gene expression patterns in rat maxillary incisor studied here is quite similar to those of the previous studies in mouse mandibular molar, even though the origins of oral epithelium and ectomesenchyme involved in development of maxillary incisor and mandibular molar are different. Thus, we conclude that maxillary incisor and mandibular molar share a similar signaling control of Fgf-8, Pitx-2, Shh, Msx-1, Pax-9 and Bmp-4 genes at the stage of oral epithelial thickening to the early bud stage of tooth development.

Velopharyngeal changes after maxillary distraction in cleft patients using a rigid external distraction device: A retrospective study.

PubMed

Taha, Mahasen; Elsheikh, Yasser M

2016-11-01

 To evaluate early and late velopharyngeal changes in cleft lip and palate (CLP) patients after use of the Rigid External Distractor (RED) device and to correlate these changes to the amount of maxillary advancement.  Thirty Class III CLP patients were included in the study. Maxillary advancement was performed using the RED device in combination with titanium miniplates and screws for anchorage. Lateral cephalograms, nasometer, and nasopharyngoscope records were taken before distraction, immediately after distraction, and 1 year after distraction. A paired t-test was used to detect differences at P < .05.  SNA angle and A point and ANS to Y axis were significantly increased after maxillary distraction (P  =  .0001). Statistically significant increases in nasopharyngeal and oropharyngeal depths, velar angle, and need ratio were also found (P  =  .0001). Nasalance scores showed a significant increase (P  =  .008 for nasal text and .044 for oral text). A significant positive correlation was observed between the amount of maxillary advancement and the increase in nasopharyngeal depth and hypernasality (P  =  .012 and .026, respectively).  Nasopharyngeal function was deteriorated after maxillary advancement in CLP patients. There was a significant positive correlation between the amount of maxillary advancement and the increase in nasopharyngeal depth and hypernasality.

[Effects of maxillary distraction osteogenesis on the velopharyngeal configuration of cleft palate patients].

PubMed

Wang, Xiao-xia; Wang, Xing; Yi, Biao; Li, Zi-li; Liang, Cheng

2005-12-18

To study the effects of internal maxillary distraction osteogenesis(DO) on the velopharyngeal configuration of cleft palate patients. Ten patients with severe maxillary hypoplasia secondary to cleft lip and palate patients (7 males and 3 females, average age 20.1 years old) had undertaken high step LeFort I osteotomy, and internal maxillary distraction devices were applied to advance the maxilla. Before surgery, when DO was completed and 6 months after DO was completed, oriented lateral cephalograms at rest position of each patient were taken, and 6 measure indexes of velopharyngeal configuration were collected and analyzed. All patients had successfully accomplished maxillary DO and the maxilla had been averagely advanced 11.3 mm. PNS-PhW, C-PhW, UL and ANS-PNS-T had all significantly increased, and UD had significantly decreased when DO was completed and 6 months after DO was completed as compared with pre-surgery. No significant linear correlation was found between maxilla advancement distance and velopharyngeal configuration changes. Correction of maxillary hypoplasia secondary to cleft palate surgery by using internal maxillary DO can increase the velopharyngeal cavity depth, and may impair velopharyngeal competence, but the compensatory changes of velopharyngeal soft tissue can alleviate this impairment to certain extent.

Tooth-Borne Anterior Maxillary Distraction for Cleft Maxillary Hypoplasia: Our Experience With 147 Patients.

PubMed

Richardson, Sunil; Selvaraj, Dhivakar; Khandeparker, Rakshit V; Seelan, Nikkie S; Richardson, Shweta

2016-12-01

To evaluate the results of anterior maxillary distraction for its efficacy and long-term stability in the management of cleft maxillary hypoplasia in a large series of patients with a long-term follow-up extending to 4 years. One hundred sixty-four patients at least 10 years old with cleft maxillary hypoplasia who presented to the authors' unit from January 2009 through October 2014 were evaluated retrospectively, irrespective of gender, type of cleft lip and palate, and amount of advancement needed. Anterior maxillary distraction using a tooth-borne distractor appliance was carried out in all patients and all patients were followed up to 4 years (range, 1 to 4 yr) to evaluate the stability of the procedure and to document any relapse using digitalized lateral cephalograms taken before distraction, immediately after distraction (T2), and at the last follow-up visit (T3; range, 1 to 4 yr). Seventeen patients were subsequently lost to follow-up; therefore, a complete set of records was available for 147 patients. In a subset of 50 patients, perceptual speech assessment was carried out preoperatively and 6 months postoperatively by 2 speech pathologists using the Perkins scoring system that allowed the evaluation of 5 parameters (velopharyngeal insufficiency, resonance, nasal air emission, articulation, and intelligibility). None of these patients underwent speech therapy during the course of evaluation. The development of complications intra- or postoperatively was noted. The data were tabulated and analyzed. An advancement ranging from 4.0 to 13.1 mm (mean, 9.42 mm) was achieved in all patients. One hundred forty patients (95.23%) showed stable results on lateral cephalograms and when T2 values were compared with T3 values. Seven patients (4.76%) exhibited skeletal relapse in various linear and angular measurements assessed on lateral cephalograms. At 6-month follow-up, improvements of 62% (n = 31), 64% (n = 32), 50% (n = 25), 68% (n = 34), and 70% (n = 35) in velopharyngeal insufficiency, resonance, nasal air emission, articulation, and intelligibility, respectively, were observed, with worsening of all parameters in 1 patient (2%). An overall complication rate of 25.17% (n = 37) was noted, with bleeding being the most common intra- and postoperative complication noted in 15 patients (10.2%). No serious consequences related to any complication were noted. Anterior maxillary distraction can be considered a suitable treatment option for the management of mild to moderate cleft maxillary hypoplasia because the anteroposterior deficiency can be addressed at a young age, immediately after the eruption of the maxillary second premolars. Stable long-term results with negligible skeletal relapse are possible with this technique, with an added advantage of unhampered or even improved velopharyngeal function. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Evaluation of palatal plate thickness of maxillary prosthesis on phonation- a comparative clinical study.

PubMed

Zakkula, Srujana; B, Sreedevi; Anne, Gopinadh; Manne, Prakash; Bindu O, Swetha Hima; Atla, Jyothi; Deepthi, Sneha; Chaitanya A, Krishna

2014-04-01

Prosthodontic treatment involves clinical procedures which influence speech performance directly or indirectly. Prosthetic rehabilitation of missing teeth with partial or complete maxillary removable dentures influences the individual voice characteristics like Phonation, resonance etc. To evaluate the effect of Acrylic palatal plate thickness (1mm-3mm) of maxillary prosthesis on phonation. Twelve subjects were selected randomly between the age group of 20-25 years who have full complement of teeth and have no speech problems. Speech evaluation was done under four experimental conditions i.e. Without any experimental acrylic palatal plate (control), with experimental acrylic palatal plates of thickness 1 mm, 2 mm and 3 mm respectively. The speech material for phonation test consisted of Vowels sounds /a/, /i/, and /o/. Speech analysis to assess phonation was done using digital acoustic analysis (PRAAT software). The obtained results were statistically analyzed by One-way ANOVA and Tukey's multiple post-hoc for comparison of four experimental conditions with respect to different vowel sounds. Mean harmonics to noise ratio (HNR) values obtained for all the Experimental conditions did not show significant difference (p>0.05). In conclusion, an increase in the thickness of the acrylic palatal plate of maxillary prosthesis for about 1 mm - 3mm in complete or partial maxillary removable dentures resulted in no significant effect on phonation of vowel sounds /a/, /i/ and /o/. Increasing the thickness of the palatal plate from 1 mm to 3 mm has not shown any significant effect on the phonation.

The effects of fixed and removable face masks on maxillary deficiencies in growing patients.

PubMed

Jamilian, Abdolreza; Showkatbakhsh, Rahman; Taban, Tannaz

2012-01-01

To compare the effects of two different types of face masks in the treatment of Class III malocclusions with maxillary deficiency in growing patients. Forty-three patients (21 boys and 22 girls) with maxillary deficiencies were selected. Twenty-one patients (10 boys and 11 girls) with a mean age of 8.9 ± 1.4 years were treated with maxillary removable appliances and face masks. Twenty-two patients (10 boys and 12 girls) with a mean age of 9.3 ± 1.2 years were treated with maxillary fixed appliances and face masks. Lateral cephalograms obtained at the beginning and end of the study were analyzed. Paired t tests and Wilcoxon tests showed that SNA and ANB significantly increased in both groups. The Mann-Whitney test showed that there were no statistically significant differences between the two groups except for U1-SN, which increased by 6.2 ± 7.1 degrees in the removable face mask group and 11.1 ± 6.9 degrees in the fixed face mask group (P < .02). Both treatment modalities were successful in moving the maxilla forward. However, the maxillary incisors had more labial inclination in the fixed appliance group.

Maxillary overdentures supported by anteriorly or posteriorly placed implants opposed by a natural dentition in the mandible: a 1-year prospective case series study.

PubMed

Slot, Wim; Raghoebar, Gerry M; Vissink, Arjan; Meijer, Henny J A

2014-02-01

For maxillary overdenture therapy, treatment guidelines are missing. There is a need for longitudinal studies. The purpose of this 1-year prospective case series study was to assess the treatment outcome of maxillary overdentures supported by six dental implants opposed by natural antagonistic teeth in the mandible. Fifty patients were treated with a maxillary overdenture supported by six dental implants, either placed in the anterior region (n = 25 patients) or in the posterior region (n = 25 patients). Items of evaluation were the following: survival of implants, condition of hard and soft peri-implant tissues, and patients' satisfaction. One-year implant survival rate was 98% in the anterior group and 99.3% in the posterior group. Mean radiographic bone loss in the anterior and posterior groups after 1 year of loading was 0.22 and 0.50 mm, respectively. Mean scores for plaque, calculus, gingiva, bleeding, and pocket probing depth were low, and patients' satisfaction was high, with no differences between the groups. Six dental implants placed in either the anterior region or the posterior region of the edentulous maxilla, connected with a bar, and opposed by antagonistic teeth in the mandible supply a proper base for the support of an overdenture. © 2012 Wiley Periodicals, Inc.

Skeletal and dental changes in the sagittal, vertical, and transverse dimensions after rapid palatal expansion.

PubMed

Chung, Chun-Hsi; Font, Blanca

2004-11-01

The purpose of this study was to examine the maxillary and mandibular responses to rapid palatal expansion (RPE) in all 3 dimensions. Twenty children (average age, 11.7 years) who required RPE treatment were included in this study. Pre- (T1) and post-RPE (T2) lateral and posteroanterior (PA) cephalograms and study models were taken for all patients. For each patient, lateral and PA cephalograms at T1 and T2 were traced, and the sagittal, vertical, and transverse measurements were made. In addition, on the pre- and postexpansion models, the widths between the first premolars, the first molars, and the two acrylic halves of the Haas-type expander were measured. Results showed that from T1 to T2, the mean SNA increased 0.35 degrees (P < .05) and ANB increased 1.00 degrees (P < .05). Both the ANS and PNS moved downward (1.30 mm and 1.43 mm, respectively, P < .05), and the mandibular plane angle (MP-SN) increased 1.72 degrees (P < .05). The maxillary and mandibular incisors did not change significantly after RPE. After RPE, the mean increase of maxillary interpremolar width, maxillary intermolar width, maxillary width (J-J), nasal width, and interorbital width were found to be 110.7%, 104.5%, 30.1%, 23.1%, and 3.3% of the screw expansion, respectively. After RPE treatment in children, the maxilla displaced slightly forward and downward (P < .05); the mandible rotated downward and backward, and the anterior facial height increased significantly (P < .05); and the widths of the maxilla and nasal cavity increased significantly (P < .05).

Endodontic treatment of a maxillary lateral incisor with a perforating internal resorption by using cone beam computed tomography as a diagnostic aid: a case report.

PubMed

Takita, Toshiya; Tsurumachi, Tamotsu; Ogiso, Bunnai

2011-10-01

This case report presents the endodontic treatment of a maxillary right lateral incisor with a perforating internal resorption in a 50-year-old woman. Radiographically, internal resorption appears as a fairly uniform, radiolucent enlargement of the pulp canal and distortion of the original root canal outline. The use of cone beam computed tomography can help the clinician in making a confirmatory diagnosis and determining the treatment plan before undertaking the actual treatment. After cleaning the root canal space and the resorptive defect by mechanic instrumentation, irrigation, and interim calcium hydroxide dressing, the apical third canal was filled with a gutta-percha point by lateral condensation. The resorptive defect was filled with mineral trioxide aggregate. Follow-up radiographs at 3 years showed adequate repair of the resorption, and the tooth remained asymptomatic.

Association between third molar agenesis patterns and agenesis of other teeth in a Japanese orthodontic population.

PubMed

Endo, Saori; Sanpei, Sugako; Ishida, Rieko; Sanpei, Shinya; Abe, Ryota; Endo, Toshiya

2015-01-01

The purpose of this study was to investigate the patterns of third molar agenesis and incidence of agenesis of other permanent teeth in a Japanese orthodontic patient group. A total of 417 Japanese subjects (134 males and 283 females) with agenesis of one or more third molars were divided into four groups according to the agenesis pattern, and 874 other Japanese subjects (302 males and 572 females) without third molar agenesis were assigned to a control group. Panoramic radiographs and medical and dental records were used to examine for tooth agenesis. The Chi-square test and odds ratio were used to make statistical comparisons. The prevalence of third molar agenesis worked out at 32.3% with no statistically significant gender difference. A high prevalence rate of agenesis of third molars, unilateral or bilateral, could be considered characteristic of the Japanese orthodontic population. Significant increases in occurrence of oligodontia, and unilateral or bilateral agenesis of other teeth, including maxillary lateral incisors and maxillary and mandibular second premolars, were observed in all or almost all of the third molar agenesis groups, compared with the controls. A significantly increased prevalence rate of mandibular lateral incisor agenesis was observed in almost all of the third molar agenesis groups. The Japanese patients with third molar agenesis had a significantly increased occurrence of oligodontia, and unilateral or bilateral agenesis of maxillary and mandibular lateral incisors and second premolars, except for bilateral agenesis of mandibular lateral incisors.

[Maxillary swing approach in the management of tumors in the central and lateral cranial base].

PubMed

Liao, Hua; Hua, Qing-quan; Wu, Zhan-yuan

2006-04-01

A retrospective review of seventeen patients who were operated through the maxillary swing approach was carried out to assess the efficacy of this approach in the management of tumors of the central and lateral cranial base. From May 2000 to January 2005, 17 patients with primary or recurrent neoplasms involving the central cranial or lateral base underwent surgical resection via maxillary swing approach. Ten patients were male, and other seven patients were female, and age range was 7 to 58 years, with a mean age of 42. 6 years. Eight patients had tumors originally involving lateral cranial base, and nine patients had tumors originated from central cranial base. The pathology spectrum was very wide. Among them, five suffered from chordoma, two had rhabdomyosarcoma, two had squamous cell carcinoma, one had malignant fibrous histiocytoma, one had malignant melanoma, one had esthesioneuroblastoma, one had invaded hypophysoma, two had schwannoma, one had pleomorphic adenoma, and one had angiofibroma. Three patients had received previous surgery, two patients had previous radiation therapy and nine patients received postoperative radiotherapy. Sixteen of all seventeen patients had oncologically complete resection, one had near-total resection. This group patients was followed up from 10 to 60 months, with a median follow-up time of 28 months. Two patients died 14 and 26 months after surgery respectively, as a result of local recurrence and metastasis. One patient defaulted follow-up at 12 months after operation, and the other 14 patients were alive at the time of analysis. Of the 12 malignant tumors, the 1-and 2-year survival rate were 91.67% and 72.92%, respectively. The facial wounds of all patients healed primarily, and there were no necrosis of the maxilla, damage of the temporal branch of the facial nerve, lower-lid ectropion, and facial deformity. Epiphora and facial hypoesthesia were detected in all patients. Four patients (23.5%) developed palatal fistula, ten patients developed serous otitis media (58.8%), and four patients developed a certain degree of trismus (23.5%). Cerebrospinal fluid leak occurred in two patients. They subsequently healed with conservative management. The maxillary swing approach is a proven method for access to the central and lateral skull base with good exposure and acceptable morbidity. Complications and sequelae associated with this approach include facial scarring, transaction of the infraorbital nerve, impaired lacrimal drainage, eustachian tube dysfunction and serous otitis, palatal fistula, trismus etc. Some procedures should be performed for reducing the incidence and severity of complications in the maxillary swing approach.

Maxillary Nine-year Molars: Prevalence and Associated Dental and Medical Conditions.

PubMed

Klein, Ulrich; Alford, Jacqueline A; Allshouse, Amanda A; Sain, Joel

2016-01-01

The purpose of this study was to determine, from a large number of panoramic images taken in the clinic of a pediatric dentistry residency program, the prevalence of maxillary nine-year molars (9YM), associated medical conditions (MCs), and the presence of coexisting tooth anomalies (TAs). Pantomograms from 13,140 patients were searched for 9YM. Radiographs from identified subjects were examined for coexisting TAs, and charted MCs were noted. For identified 9YM, Nolla's stage of tooth formation was determined and the subjects' dental ages were calculated. Among 53 subjects (68 percent females), 21 unilateral and 32 bilateral cases of 9YM occurred. Females and males were of similar age (7.98 versus 7.91 years old). Overall dental and chronological ages were significantly different: dental development in bilateral cases was delayed by 4.1 months in females and 2.9 months in both sexes (P=.003). In unilateral cases, it was accelerated by 3.6 months in females and 3.5 months in males. The specific tooth age for all 9YM was 4.95 years for females and 5.56 years for males (P=.018). The average count of associated findings (e.g., missing teeth, peg laterals, other TAs, and other eruption delays) was 0.62 in unilateral and 1.44 in bilateral cases (P=.02). Commonly associated MCs included clefting (N equals five), and Down syndrome (n equals three). The prevalence of nine-year molars was one in 248 (0.4 percent), and the average delay in dental development was 2.7 years.

A 3-year clinical and radiographic study of implants placed simultaneously with maxillary sinus floor augmentations using a new nanocrystalline hydroxyapatite.

PubMed

Heinemann, F; Mundt, T; Biffar, R; Gedrange, T; Goetz, W

2009-12-01

The aims of this case series was to evaluate the success rate of implants and their restorations, the sinus bone graft resorption, and the marginal bone loss around the implants when nanocristalline HA embedded in a silica matrix was exclusively used as grafting material. In 13 partially edentulous patients of a private practice having missing teeth in the posterior maxilla and a subantral bone height between 3 and 7 mm, 19 sinus augmentations (100% Nanobone, Artoss, Rostock, Germany) by the lateral lift technique were performed. The implants (Tiolox/Tiologic Implants, Dentaurum, Ispringen, Germany) were simultaneously placed. After 6 to 9 months 37 implants were restored with fixed dental prostheses. The clinical evaluation included peri-implant parameters, periotest measurements and the restorations. The radiographic bone heights over time were estimated with linear mixed models. The implant success rate was 100% after three years. The periotest values (between -7 and -6) after implant abutment connection indicated a solid osseointegration. The mean rates of the marginal bone loss over the first year were higher (mesial: -0.55, distal: -0.51 mm) than the annual rates thereafter (mesial: -0.09 mm, distal: -0.08 mm). The mean rates of changes in the total bone height were neglectable (<0.2 mm) and not significant. The prosthodontic and esthetic evaluation revealed a successful outcome. Within the limits of this clinical report it may be concluded that maxillary sinus augmentation using 100% nanocristalline HA embedded in a silica matrix to support implants is a reliable procedure.

Mandibular fracture patterns consistent with posterior maxillary fractures involving the posterior maxillary sinus, pterygoid plate or both: CT characteristics.

PubMed

Imai, T; Sukegawa, S; Kanno, T; Fujita, G; Yamamoto, N; Furuki, Y; Michizawa, M

2014-01-01

The aim of this study was to determine the incidence of posterior maxillary fractures involving the posterior maxillary sinus wall, pterygoid plate or both, unrelated to major midface fractures in patients with mandibular fractures, and to characterize associated fractures. A CT study was performed in patients with mandibular fractures to identify posterior maxillary fractures. Patients aged under 16 years, those with mandibular fractures involving only dentoalveolar components and those with concurrent major midfacial fractures were excluded. 13 (6.7%) of 194 patients with mandibular fractures also had posterior maxillary fractures (case group). The injury pattern correlated with the external force directed to the lateral side of the mandible (p < 0.001), alcohol consumption (p = 0.049), the presence of multifocal fractures (p = 0.002) and the fracture regions in the symphysis/parasymphysis (p = 0.001) and the angle/ramus (p = 0.001). No significant difference between the case and non-case groups was seen for age, sex or cause of trauma. Non-displaced fractures in the ipsilateral posterior mandible occurred with significant frequency (p = 0.001) when the posterior maxillary fractures involved only the sinus. Mandibular fractures accompanied by posterior maxillary fractures are not rare. The finding of a unilateral posterior maxillary fracture on CT may aid the efficient radiological examination of the mandible based on possible patterns of associated fractures, as follows: in the ipsilateral posterior region as a direct fracture when the impact is a medially directed force, and in the symphysis/parasymphysis or contralateral condylar neck as an indirect fracture.

Soft tissue changes from maxillary distraction osteogenesis versus orthognathic surgery in patients with cleft lip and palate--a randomized controlled clinical trial.

PubMed

Chua, Hannah Daile P; Cheung, Lim Kwong

2012-07-01

The objective of this randomized controlled clinical trial was to compare the soft tissue changes after maxillary advancement using conventional orthognathic surgery (CO) and distraction osteogenesis (DO) in patients with cleft lip and palate (CLP). The study group of 39 CLP patients with maxillary hypoplasia underwent either CO or DO with 4 to 10 mm of maxillary advancement. Lateral cephalographs were taken preoperatively and postoperatively at regular intervals. A series of skeletal, dental, and soft tissue landmarks was used to evaluate the changes in the soft tissue and the correlation of hard and soft tissue changes and ratios. Significant differences were found between the CO and DO patients at A point in both maxillary advancement and downgrafting in the early follow-up period. On soft tissue landmarks of pronasale, subnasale, and labial superius, significant differences were found between the 2 groups at 6 months postoperatively only with maxillary advancement. There was better correlation of hard and soft tissue changes with maxillary advancement. The nasal projection was significantly different between the 2 groups at the early and intermediate period. There was much more consistent hard to soft tissue ratios in maxillary advancement with DO than with CO. Both CO and DO can induce significant soft tissue changes of the upper lip and nose, particularly with maxillary advancement. DO generates more consistent hard to soft tissue ratios. Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Endodontic treatment of a maxillary central incisor with two roots.

PubMed

Maghsoudlou, Amir; Jafarzadeh, Hamid; Forghani, Maryam

2013-03-01

This clinical report presents a rare case of maxillary central incisor with two separate roots. Unusual morphology of the roots and root canals may exist in any tooth. Recognition of the dental anatomy and its variations is necessary for successful endodontic therapy. It is well known that maxillary incisors are usually single-rooted teeth. The root canals were instrumented with conventional hand files and Gates Glidden and obturated by using the lateral technique. Recall radiograph after 1 year shows the healing process of the preoperative apical periodontitis. Clinicians should be aware of unexpected root canal morphology when performing root canal therapy. The present case demonstrated the importance of accurate preoperative radiograph and adequate access preparation.

Management of an endo perio lesion in a maxillary canine using platelet-rich plasma concentrate and an alloplastic bone substitute.

PubMed

Singh, Sangeeta

2009-05-01

To evaluate the efficacy of platelet-rich plasma concentrate in the management of a cirumferential, infrabony defect associated with an endoperio lesion in a maxillary canine. A 45 year-old male patient with an endoperio lesion in the left maxillary canine was initially treated with endodontic therapy. Following the endodontic treatment, the circumferential, infrabony defect was treated using platelet-rich plasma and an alloplastic bone substitute. At the end of three months, there was a gain in the clinical attachment level and reduction in probing depth. Radiographic evidence showed that there was significant bony fill. The results were maintained at the time of recall nine months later.

Combined periodontic-orthodonticendodontic interdisciplinary approach in the treatment of periodontally compromised tooth.

PubMed

Deepa, D; Mehta, D S; Puri, Viren K; Shetty, Sadashiva

2010-04-01

Orthodontic treatment in adult patients is one of the most frequently encountered components involving multidisciplinary approaches. In the present report, a 28-year-old male patient was treated for localized chronic periodontitis with pocket formation, mobility, pathologic migration and malalignment of maxillary left lateral incisor tooth #22. The periodontal therapy included motivation, education and oral-hygiene instructions (O.H.I.), scaling and root planing and periodontal flap surgery. Subsequently on resolution of periodontal inflammation, orthodontic therapy was carried out using the orthodontic aligner for a period of 6 months. Post-treatment (3 years) results showed complete resolution of infrabony pocket with significant bone fill, reduced tooth mobility and complete alignment of the affected maxillary left lateral incisor, thus restoring the esthetics and function.

Destructive Fibrosarcoma of the Maxillary Sinus.

PubMed

Ekinci, Adnan; Karataş, Duran; Yetiş, Abdurrahman; Erenler, Behice Hande; Ozcan, Muge

2018-05-01

Paranasal fibrosarcoma of nasal cavity and paranasal sinuses is a very rare malignant tumor. It is usually presented with nasal obstruction and epistaxis. In this clinical report, clinical symptoms, pathogenesis, and treatment principles of a paranasal fibrosarcoma originating from the right maxillary sinus and obstructing the right nasal passage are discussed.A 55-year-old male patient was admitted to the authors clinic with complaints of nasal obstruction and epistaxis lasting for 2 years. Anterior rhinoscopy revealed a mass lesion which obstructed the right nasal passage and caused frequent epistaxis. An opacity consistent with soft tissue lesion which was originated from the right maxillary sinus and filled the right nasal passage was observed in paranasal tomography. Magnetic resonance imaging revealed that the mass lesion was contrasted. Tumor was seen to erode orbital floor, and lateral and anterior walls of the maxillary sinus. Biopsy result was reported as papilloma. The patient was treated with Denker approach as anterior wall of the maxillary sinus was eroded by the tumor lesion and the mass lesion was excised. The patient received postoperative radiotherapy as pathological diagnosis was reported as paranasal fibrosarcoma.

Breakage of internal maxillary distractor: considerable complication of maxillary distraction osteogenesis.

PubMed

Aikawa, Tomonao; Iida, Seiji; Isomura, Emiko T; Namikawa, Mari; Matsuoka, Yudai; Yamada, Chiaki; Yamamoto, Taku; Takigawa, Yoko

2008-07-01

Maxillary distraction osteogenesis using intraoral distractors is now one of the standard treatments of maxillary retrusion. This report shows 2 cases of breakage of this internal maxillary distractor in patients with cleft lip and palate; one was observed during the distraction period and the other was during the retention period. The first case required a rotational movement of the distraction segment, and this movement caused the laterally dislocation of the posterior part of the distractor, where the distractor suffered some mechanical forces by mouth opening. In the latter case, breakage of distractor was observed on the radiographs taken 3 months after distraction and this complication may have been caused by mechanical force by occlusion and mastication. Both breakages were found at the joint of the anchorage plate and the extension rod, which has some flexibility for adjusting the plate to the bone surface. Therefore, surgeons should pay special attention for this mechanical weak area in this distractor not only during the advancement period, but also during the retention period and should avoid unnecessary frequent bending for adopting the bone surface, which directly weakens the joint.

Maxillary distraction in patients with cleft deformity using a rigid external distraction device: a pilot study on the distraction ratio of the maxilla to the device.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2004-01-01

We examined the ratio between actual maxillary distraction and the distraction of the rigid external distraction device (Rigid external distraction (RED) system) used for maxillary distraction in patients with a cleft deformity. Twelve patients were examined. The amount of maxillary advancement was measured on lateral cephalograms and divided by the activation amount on the RED system. The value obtained was represented as the distraction ratio of the maxilla to the system. The mean ratio in 10 patients with complete cleft lip, palate, and alveolus (complete cleft) was 0.24. However, the ratios in two patients with cleft lip and alveolus or soft cleft palate (incomplete cleft) were considerably higher than the mean ratios in patients with complete cleft. When the maxilla is distracted in patients with complete cleft using the RED system, the amount of activation on the system needs to be about four times the amount of planned maxillary distraction. However, the distraction ratio may be affected by the type of cleft.

Long-term maxillomandibular skeletal and dental changes in children with cleft lip and palate after maxillary distraction.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2006-09-01

Long-term skeletal and dental changes were examined in 8 children with cleft lip and palate who underwent maxillary distraction to allow the maxilla to catch up to their mandibular growth at the treatment point. Changes in the overjet (OJ), overbite (OB), and positions of the anterior nasal spine (ANS), upper incisors (U1), pogonion (Pog), and lower incisors (L1) were measured on preoperative to 36 months postoperative lateral-cephalograms. In most of the children, the long-term changes after the maxillary distraction resulted in an inferior growth of the maxilla and anteroinferior growth of the mandible. This seems to suggest that maxillary distraction performed during childhood needs considerable overcorrection. However, if the maxilla is distracted to an adult position during childhood, the masticatory functions of the children will markedly deteriorate until their jaws grow. Therefore, we believe that one goal of maxillary distraction during childhood can be to allow the maxilla to catch up to the mandibular growth of the children at the treatment point.

Does Andrews facial analysis predict esthetic sagittal maxillary position?

PubMed

Resnick, Cory M; Daniels, Kimberly M; Vlahos, Maryann

2018-04-01

Cephalometric analyses have limited utility in planning maxillary sagittal position for orthognathic surgery. In Six Elements of Orofacial Harmony, Andrews quantified maxillary position relative to forehead projection and angulation and proposed an ideal relationship. The purpose of this study was to investigate the ability of this technique to predict esthetic sagittal maxillary position. Survey study including a male and female with straight facial profiles, normal maxillary incisor angulations, and Angle's Class I. Maxillary position was modified on lateral photographs to create 5 images for each participant with incisor-goal anterior limit line (GALL) distances of -4, -2, 0, +2, and +4 mm. A series of health care professionals and laypeople were asked to rate each photo in order of attractiveness. A total of 100 complete responses were received. Incisor-GALL distances of +4 mm (41%) and +2 mm (40%) were most commonly considered "most esthetic" for the female volunteer (P < .001). For the male volunteer, there were 2 peak "most esthetic" responses: incisor-GALL distances of 0 mm (37%) and -4 mm (32%) (P < .001). Respondents considered maxillary incisor position 2 to 4 mm anterior to GALL most attractive in a woman and 0 to 4 mm posterior to GALL most esthetic in a man. Using these modified target distances, this analysis may be useful for orthognathic surgery planning. Copyright © 2018 Elsevier Inc. All rights reserved.

Midpalatal miniscrews and high-pull headgear for anteroposterior and vertical anchorage control: cephalometric comparisons of treatment changes.

PubMed

Lee, Jungkil; Miyazawa, Ken; Tabuchi, Masako; Kawaguchi, Misuzu; Shibata, Momoko; Goto, Shigemi

2013-08-01

Our aim was to evaluate which anchorage system is better suited for both anteroposterior and vertical anchorage control of maxillary posterior teeth. Fifty-one subjects requiring maximum anchorage were divided into 2 groups according to maxillary posterior anchorage reinforcement: high-pull headgear, conventional transpalatal arch, and interarch elastics (n = 28); or modified transpalatal arch supported by 2 midpalatal miniscrews (n = 23). Bilateral maxillary first premolars were extracted in all patients. Pretreatment and posttreatment lateral cephalometric radiographs were superimposed to compare skeletal and dental changes between the groups. (1) The miniscrew group had less mesial movement of the maxillary first molars (0.85 vs 3.63 mm) and greater maxillary incisor retraction (6.87 vs 4.50 mm) than did the headgear group with the same treatment duration. (2) The maxillary molars were significantly intruded in the miniscrew group (1.30 mm), whereas they were extruded in the headgear group (0.71 mm). In the miniscrew group, intrusion of the maxillary molars resulted in a statistically significant decrease in the mandibular plane angle (0.80°). Patients using high-pull headgear showed no significant decrease in these measurements. In both the anteroposterior and vertical directions, a modified transpalatal arch supported by 2 midpalatal miniscrews provided more stable anchorage. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

One-step transversal palatal distraction and maxillary repositioning: technical considerations, advantages, and long-term stability.

PubMed

Cortese, Antonio; Savastano, Mauro; Savastano, Germano; Claudio, Pier Paolo

2011-09-01

Transversal maxillary hypoplasia in adolescence is a frequently seen pathology, which can be treated with a combination of surgery and orthodontic treatment to widen the maxilla in skeletally matured patients.We evaluated the advantages of a new surgical technique: Le Fort I distraction osteogenesis using a bone-borne device. Because relapse is one of the main problems in surgical maxillary expansion, long-term stability of this new technique was evaluated. Data from 4 adult patients with maxillary restriction, class III malocclusion, or maxillary malposition were collected preoperatively, 4 months after distraction, and 5 years after distraction. Measurements were recorded on dental models to detect palatal expansion at dental level; cephalograms by lateral and posteroanterior plane were analyzed to detect maxillary movements. Maxillary measurements were substantially stable 5 years after distractions. Only minor dental movements occurred at the dental analysis after 5 years related to a lack of orthodontic contention without any compromise of the dental result (no crossbite relapse and class I stability). Le Fort I with down-fracture for expansion and repositioning by bone-borne distractor device can [corrected] be used to simultaneously widen, advance, and vertically reposition the maxilla without causing healing problems, particularly using a rigid distraction device. Long-term stability can be achieved; however, further studies with a larger number of patients will be necessary for better evaluation.

Application of strict criteria in adrenal venous sampling increases the proportion of missed patients with unilateral disease who benefit from surgery for primary aldosteronism.

PubMed

Kline, Gregory; Leung, Alexander; So, Benny; Chin, Alex; Harvey, Adrian; Pasieka, Janice L

2018-06-01

Adrenal vein sampling (AVS) is intended to confirm unilateral forms of primary aldosteronism, which are amenable to surgical cure. Excessively strict AVS criteria to define lateralization may result in many patients incorrectly categorized as bilateral primary aldosteronism and opportunity for surgical cure missed. Retrospective review of an AVS-primary aldosteronism database in which surgical cases are verified by standardized outcomes. Having used 'less strict' AVS criteria for lateralization, we examined the distribution of AVS lateralization indices in our confirmed unilateral primary aldosteronism cases both with and without cosyntropin stimulation. The proportion of proven unilateral cases that would have been missed with stricter AVS interpretation criteria was calculated. Particular focus was given to the proportion of missed cases according to use of international guidelines. False-positive lateralization with 'less strict' interpretation was also calculated. Of 80 surgical primary aldosteronism cases, 10-23% would have been missed with AVS lateralization indices of 3 : 1 to 5 : 1, with or without cosyntropin. If strict selectivity indices (for confirmation of catheterization) were combined with strict lateralization indices, up to 70% of unilateral primary aldosteronism cases could have been missed. Use of Endocrine Society AVS guidelines would have missed 21-43% of proven unilateral cases. 'Less strict' AVS interpretation yielded one case (1.2%) of false lateralization. Excessively strict AVS interpretation criteria will result in a high rate of missed unilateral primary aldosteronism with subsequent loss of opportunity for intervention. Use of more lenient lateralization criteria will improve the detection rate of unilateral primary aldosteronism with very low false-positive rate.

Long palatal connective tissue rolled pedicle graft with demineralized freeze-dried bone allograft plus platelet-rich fibrin combination: A novel technique for ridge augmentation - Three case reports

PubMed Central

Reddy, Pathakota Krishnajaneya; Bolla, Vijayalakshmi; Koppolu, Pradeep; Srujan, Peruka

2015-01-01

Replacement of missing maxillary anterior tooth with localized residual alveolar ridge defect is challenging, considering the high esthetic demand. Various soft and hard tissue procedures were proposed to correct alveolar ridge deformities. Novel techniques have evolved in treating these ridge defects to improve function and esthetics. In the present case reports, a novel technique using long palatal connective tissue rolled pedicle graft with demineralized freeze-dried bone allografts (DFDBAs) plus Platelet-rich fibrin (PRF) combination was proposed to correct the Class III localized anterior maxillary anterior alveolar ridge defect. The present technique resulted in predictable ridge augmentation, which can be attributed to the soft and hard tissue augmentation with a connective tissue pedicle and DFDBA plus PRF combination. This technique suggests a variation in roll technique with DFDBA plus PRF and appears to promise in gaining predictable volume in the residual ridge defect and can be considered for the treatment of moderate to severe maxillary anterior ridge defects. PMID:26015679

Dentomaxillofacial characteristics of ectodermal dysplasia.

PubMed

Nakayama, Yumiko; Baba, Yoshiyuki; Tsuji, Michiko; Fukuoka, Hiroki; Ogawa, Takuya; Ohkuma, Mizue; Moriyama, Keiji

2015-02-01

The aim of this retrospective hospital-based study was to elucidate the dentomaxillofacial characteristics of ectodermal dysplasia. Six Japanese individuals (one male and five female; age range, 12.7-27.2 years) underwent comprehensive examinations, including history recording, cephalometric analysis, panoramic radiography, and analysis of dental models. All the subjects had two or more major manifestations for clinical diagnosis of ectodermal dysplasia (e.g., defects of hair, teeth, nails, and sweat glands). They presented hypodontia (mean number of missing teeth, 9.5; range, 5-14), especially in the premolar region, and enamel dysplasia. Five subjects had bilateral molar occlusion, whereas one subject had unilateral molar occlusion. The common skeletal features were small facial height, maxillary hypoplasia, counterclockwise rotation of the mandible, and mandibular protrusion. Interestingly, the maxillary first molars were located in higher positions and the upper anterior facial height was smaller than the Japanese norm. The results suggest that vertical and anteroposterior maxillary growth retardation, rather than lack of occlusal support due to hypodontia, leads to reduced anterior facial height in individuals with ectodermal dysplasia. © 2014 Japanese Teratology Society.

Impact of beta thalassemia on maxillary sinuses and sino-nasal passages: A case control study.

PubMed

Ragab, Ahmed; Ragab, Seham Mohammed; Shawki, Mohammed

2015-12-01

Skeletal changes among beta (β) thalassemia children are well documented, but without available data regarding sino-nasal passages alterations. The authors investigated the maxillary sinuses and sino-nasal passages changes in β-thalassemia children and correlated such changes with the amount of transfused red cells and the erythroid marrow activity. Clinical analyses including otorhinolaryngical examination (ORL) were obtained in twenty β-thalassemia children and 20 matched healthy controls. Hemoglobin (Hb), serum ferritin, soluble transferrin receptor (sTfR) levels and bone mineral density of the lumbar spine (BMD ls) were assayed. The two groups were analyzed for the CT image parameters: bone thickness, anterior and posterior choanae diameters, extramedullary hematopoiesis and chronic rhinosinusitis (CRS) RESULTS: Nasal congestion/obstruction was identified in 14 (70%) children. Eight patients (40%) had criteria of chronic rhinosinusitis. In comparison with the normal controls, the increase in the roof, floor, medial, anterior, lateral and posterior maxillary bony walls thickness was significantly higher (1.26, 2.46, 2.6, 2.9, 3.23 and 5.34-folds, respectively). The mean posterior choanae horizontal, vertical diameters and their surface area were significantly reduced in the patients compared to the controls. The mean anterior maxillary wall bone thickness directly correlated with sTfR (P=0.047) while that of the posterior wall correlated inversely with Hb level (P=0.013). The mean vertical posterior choanae diameter had positive correlation with the amount of transfused red cells (P=0.001) and negative correlation with sTfR (P=0.001). The Hounsfield unit of maxillary sinus wall had direct relation with BMDls (P=0.003) CONCLUSIONS: Thalassemia children are at risk of different folds increase of maxillary sinuses walls thicknesses utmost at posterior and lateral walls. Other sino-nasal morbidities include diminished posterior choanal diameter, nasal obstruction and CRS. Certain morbidities had relations to the erythroid marrow activity and the transfusion adequacy. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Multidisciplinary approach to restoring anterior maxillary partial edentulous area using an IPS Empress 2 fixed partial denture: a clinical report.

PubMed

Dundar, Mine; Gungor, M Ali; Cal, Ebru

2003-04-01

Esthetics is a major concern during restoration of anterior partial edentulous areas. All-ceramic fixed partial dentures may provide better esthetics and biocompatibility in the restoration of anterior teeth. This clinic report describes a multidisciplinary approach and treatment procedures with an IPS Empress 2 fixed partial denture to restore missing anterior teeth.

An overlay partial denture to restore worn mandibular anterior teeth.

PubMed

Samant, Asha; DeSciscio, Peter

2014-01-01

Restoring worn anterior mandibular teeth is a challenge, especially when teeth are small, esthetics are a concern, the long-term prognosis is questionable, and/or patient finances are an issue. This article describes an alternate treatment for a patient with a collapsed bite, missing posterior mandibular teeth, an ill-fitting complete maxillary denture with poor esthetics, and irregular, worn mandibular anterior teeth.

A Prospective, Randomized, Double-Blind Comparison of 2% Lidocaine With 1 : 100,000 Epinephrine, 4% Prilocaine With 1 : 200,000 Epinephrine, and 4% Prilocaine for Maxillary Infiltrations

PubMed Central

Katz, Steven; Drum, Melissa; Reader, Al; Nusstein, John; Beck, Mike

2010-01-01

Abstract The purpose of this prospective, randomized, double-blind crossover study was to evaluate the anesthetic efficacy of 2% lidocaine with 1 : 100,000 epinephrine, 4% prilocaine with 1 : 200,000 epinephrine, and 4% prilocaine in maxillary lateral incisors and first molars. Sixty subjects randomly received, in a double-blind manner, maxillary lateral incisor and first molar infiltrations of 1.8 mL of 2% lidocaine with 1 : 100,000 epinephrine, 1.8 mL of 4% prilocaine with 1 : 200,000 epinephrine, and 1.8 mL of 4% prilocaine, at 3 separate appointments spaced at least 1 week apart. The teeth were pulp-tested in 3-minute cycles for a total of 60 minutes. Anesthetic success (ie, obtaining 2 consecutive 80 readings with the electric pulp tester) and onset of pulpal anesthesia were not significantly different between 2% lidocaine with 1 : 100,000 epinephrine, 4% prilocaine with 1 : 200,000 epinephrine, and 4% prilocaine for the lateral incisor and first molar. For both lateral incisor and first molar, 4% prilocaine with 1 : 200,000 epinephrine and 2% lidocaine with 1 : 100,000 epinephrine were equivalent for incidence of pulpal anesthesia. However, neither anesthetic agent provided an hour of pulpal anesthesia. For both lateral incisor and first molar, 4% prilocaine provided a significantly shorter duration of pulpal anesthesia compared with 2% lidocaine with 1 : 100,000 epinephrine and 4% prilocaine with 1 : 200,000 epinephrine. PMID:20553134

Prevalence of missing and impacted third molars in adults aged 25 years and above

PubMed Central

Jung, Yun-Hoa

2013-01-01

Purpose The purpose of this study was to determine the prevalence of missing and impacted third molars in people aged 25 years and above. Materials and Methods The study sample of 3,799 patients was chosen randomly from patients who visited Pusan National University Dental Hospital and had panoramic radiographs taken. The data collected included presence and impaction state, angulation, and depth of impaction of third molars, and radiographically detected lesions of third molars and adjacent second molars. Results A greater percentage of men than women retained at least one third molar. The incidence of third molars decreased with increasing age. The incidence of partially impacted third molars greatly declined after the age of 30. Vertically impacted maxillary third molars and horizontally impacted mandibular third molars were most frequent in all age groups. Among the maxillary third molars, those impacted below the cervical line of the second molar were most frequent in all age groups, and among the mandibular third molars, deeply impacted third molars were most frequent in those aged over 40. Dental caries was the most common radiographic lesion of the third molars. Mesioangularly impacted third molars showed radiographic lesions in 13 (9.5%) adjacent maxillary second molars and 117 (27.4%) mandibular second molars. Conclusion The number of remaining third molars decreased and the percentage of Class C depth increased with age. Caries was the most frequent lesion in third molars. Partially impacted mesioangular third molars showed a high incidence of caries or periodontal bone loss of the adjacent second molar. Regular oral examination will be essential to keep asymptomatic third molars in good health. PMID:24380060

Gingival zenith positions and levels of the maxillary anterior dentition.

PubMed

Chu, Stephen J; Tan, Jocelyn H-P; Stappert, Christian F J; Tarnow, Dennis P

2009-01-01

The location of the gingival zenith in a medial-lateral position relative to the vertical tooth axis of the maxillary anterior teeth remains to be clearly defined. In addition, the apex of the free gingival margin of the lateral incisor teeth relative to the gingival zeniths of the adjacent proximal teeth remains undetermined. Therefore, this investigation evaluated two clinical parameters: (1) the gingival zenith position (GZP) from the vertical bisected midline (VBM) along the long axis of each individual maxillary anterior tooth; and (2) the gingival zenith level (GZL) of the lateral incisors in an apical-coronal direction relative to the gingival line joining the tangents of the GZP of the adjacent central incisor and canine teeth under healthy conditions. A total of 240 sites in 20 healthy patients (13 females, 7 males) with an average age of 27.7 years were evaluated. The inclusion patient criteria were absence of periodontal disease, gingival recession, or gingival hypertrophy as well as teeth without loss of interdental papillae, spacing, crowding, existing restorations, and incisal attrition. GZP dimensions were measured with calibrated digital calipers for each individual tooth and within each tooth group in a medial-lateral direction from the VBM. GZLs were measured in an apical-coronal direction from a tangent line drawn on the diagnostic casts from the GZPs of the adjacent teeth. This study demonstrated that all central incisors displayed a distal GZP from the VBM, with a mean average of 1 mm. Lateral incisors showed a deviation of the gingival zenith by a mean of 0.4 mm. In 97.5% of the canine population, the GZP was centralized along the long axis of the canine. The mean distance of the contour of the gingival margin in an apical-coronal direction of the lateral incisors (GZL) relative to gingival line joining the tangent of the adjacent central and canine GZPs was approximately 1 mm. This investigation revealed a GZP mean value of 1 mm distal from the VBM for the central incisor tooth group. The lateral incisors showed a mean average of 0.4 mm. The canine tooth group demonstrated almost no deviations of the GZP from the VBM. The GZL of the lateral incisors relative to the adjacent central incisor and canine teeth were more coronal by approximately 1 mm. These data could be used as reference points during esthetic anterior oral rehabilitation. The information presented in this article can be clinically applied to reestablish the proper intratooth GZPs of the maxillary anterior teeth during periodontal crown lengthening or root coverage procedures. In addition, the intra-arch gingival level of the lateral incisor gingival zenith relative to the adjacent central and canine teeth can be appropriately established.

Proportions of maxillary anterior teeth relative to each other and to golden standard in tabriz dental faculty students.

PubMed

Parnia, Fereydoun; Hafezeqoran, Ali; Mahboub, Farhang; Moslehifard, Elnaz; Koodaryan, Rodabeh; Moteyagheni, Rosa; Saleh Saber, Fariba

2010-01-01

Various methods are used to measure the size and form of the teeth, including the golden pro-portion, and the width-to-length ratio of central teeth, referred to as the golden standard. The aim of this study was to eval-uate the occurrence of golden standard values and golden proportion in the anterior teeth. Photographs of 100 dentistry students (50 males and 50 females) were taken under standard conditions. The visible widths and lengths of maxillary right and left incisors were calculated and the ratios were compared with golden standard. Data was analyzed using SPSS 14 software. Review of the results of the means showed statistically significant differences between the width ratio of right lateral teeth to the central teeth width with golden proportion (P<0.001). Likewise, the difference was significant for the left side, too (P<0.001). Test results of mean differences showed that the mean difference between proportion of right laterals to centrals with golden proportion was significant (P<0.001). The difference was significant for the left side, too (P<0.001). As a result, there is no golden proportion among maxillary incisors. The review of results of mean differences for single samples showed that the mean differences between the proportion of width-to-length of left and right central teeth was statistically significant by golden standard (P<0.001). Therefore, considering the width-to-length proportion of maxillary central teeth, no golden standard exists. In the evaluation of the width-to-width and width-to-length proportions of maxillary incisors no golden proportions and standards were detected, respectively.

The influence of sequence of impressions on children's anxiety and discomfort.

PubMed

Kaakko, Tarja; Horn, Michael T; Weinstein, Philip; Kaufman, Eliezer; Leggott, Penelope; Coldwell, Susan E

2003-01-01

Laboratory studies with adults and children have found lower pain reports when pain proceeds from high to low rather than from low to high. However, pediatric dentists often ease children into difficult procedures (from easiest to most difficult). This study investigated the influence of order during a clinical procedure that involved taking maxillary and mandibular alginate impressions. Subjects were 24 children aged 5 to 6 years (preoperational stage) and 24 children aged 9 to 10 years (concrete operational stage). Children were randomly assigned to either start with the mandibular (presumed to be easier) or start with the maxillary (presumed to be harder) impressions. Discomfort during the sequence of impressions was measured using the "Affective Facial Scale." A telephone interview was conducted 2 weeks later to evaluate the memory of discomfort. The results indicated that the older children who started with the mandibular (easier) impression and ended with the maxillary (more uncomfortable) impression reported significantly lower discomfort than older children who started with the maxillary impression and ended with the mandibular (Mann-Whitney U, Z = -2.08; P < .037). The same tendency was noted 2 weeks later on a telephone interview. By phone, 92% of the older children who started with the mandibular impression rated the sequence of impressions as "not at all bad," while only 58% of the older children who started with the maxillary impression rated the overall experience as "not at all bad" (chi2 = 3.56, P < .059). The younger children did not show any significant difference in their ratings of discomfort at either of the assessment periods. Consistent with clinical practice, this study observed that older children benefit from beginning an appointment with an easier procedure and working up to a more difficult one.

Mandibular fracture patterns consistent with posterior maxillary fractures involving the posterior maxillary sinus, pterygoid plate or both: CT characteristics

PubMed Central

Sukegawa, S; Kanno, T; Fujita, G; Yamamoto, N; Furuki, Y; Michizawa, M

2014-01-01

Objectives: The aim of this study was to determine the incidence of posterior maxillary fractures involving the posterior maxillary sinus wall, pterygoid plate or both, unrelated to major midface fractures in patients with mandibular fractures, and to characterize associated fractures. Methods: A CT study was performed in patients with mandibular fractures to identify posterior maxillary fractures. Patients aged under 16 years, those with mandibular fractures involving only dentoalveolar components and those with concurrent major midfacial fractures were excluded. Results: 13 (6.7%) of 194 patients with mandibular fractures also had posterior maxillary fractures (case group). The injury pattern correlated with the external force directed to the lateral side of the mandible (p < 0.001), alcohol consumption (p = 0.049), the presence of multifocal fractures (p = 0.002) and the fracture regions in the symphysis/parasymphysis (p = 0.001) and the angle/ramus (p = 0.001). No significant difference between the case and non-case groups was seen for age, sex or cause of trauma. Non-displaced fractures in the ipsilateral posterior mandible occurred with significant frequency (p = 0.001) when the posterior maxillary fractures involved only the sinus. Conclusions: Mandibular fractures accompanied by posterior maxillary fractures are not rare. The finding of a unilateral posterior maxillary fracture on CT may aid the efficient radiological examination of the mandible based on possible patterns of associated fractures, as follows: in the ipsilateral posterior region as a direct fracture when the impact is a medially directed force, and in the symphysis/parasymphysis or contralateral condylar neck as an indirect fracture. PMID:24336313

Evaluation of Palatal Plate Thickness of Maxillary Prosthesis on Phonation- A Comparative Clinical Study

PubMed Central

B, Sreedevi; Anne, Gopinadh; Manne, Prakash; Bindu O, Swetha Hima; Atla, Jyothi; Deepthi, Sneha; Chaitanya A, Krishna

2014-01-01

Background: Prosthodontic treatment involves clinical procedures which influence speech performance directly or indirectly. Prosthetic rehabilitation of missing teeth with partial or complete maxillary removable dentures influences the individual voice characteristics like Phonation, resonance etc. Aim: To evaluate the effect of Acrylic palatal plate thickness (1mm-3mm) of maxillary prosthesis on phonation. Materials and Methods: Twelve subjects were selected randomly between the age group of 20-25 years who have full complement of teeth and have no speech problems. Speech evaluation was done under four experimental conditions i.e. Without any experimental acrylic palatal plate (control), with experimental acrylic palatal plates of thickness 1 mm, 2 mm and 3 mm respectively. The speech material for phonation test consisted of Vowels sounds /a/, /i/, and /o/. Speech analysis to assess phonation was done using digital acoustic analysis (PRAAT software). The obtained results were statistically analyzed by One-way ANOVA and Tukey’s multiple post-hoc for comparison of four experimental conditions with respect to different vowel sounds. Results: Mean harmonics to noise ratio (HNR) values obtained for all the Experimental conditions did not show significant difference (p>0.05). In conclusion, an increase in the thickness of the acrylic palatal plate of maxillary prosthesis for about 1 mm - 3mm in complete or partial maxillary removable dentures resulted in no significant effect on phonation of vowel sounds /a/, /i/ and /o/. Conclusion: Increasing the thickness of the palatal plate from 1 mm to 3 mm has not shown any significant effect on the phonation. PMID:24959508

Three-dimensional evaluation of upper airway following rapid maxillary expansion: a CBCT study.

PubMed

El, Hakan; Palomo, Juan Martin

2014-03-01

To evaluate, by using cone beam computed tomography, the skeletal, dental, oropharyngeal (OP) airway volume, and nasal passage (NP) volume changes that occur after rapid maxillary expansion (RME). Two groups were selected, each with 35 patients (15 males, 20 females), an RME group (mean age, 14.02 ± 1.46 years) and a control group (mean age, 14.10 ± 1.44 years). The RME group consisted of patients with maxillary constriction who were treated with Hyrax palatal expanders, and the control group comprised age- and sex-matched patients who underwent comprehensive orthodontic treatment without the use of a rapid maxillary expander. All of the transverse skeletal (medial orbital width, lateral nasal width, maxillary width, and mandibular width) and interdental (intermolar, interpremolar, and intercanine) parameters were significantly enlarged in the RME group. A statistically significant increase in airway variables was seen in both groups between pretreatment (T0) and final records (T1). The mean increase of NP airway volume for the RME group (1719.9 ± 1510.7 mm(3)) was twofold compared with the control group (813.6 ± 1006.7 mm(3)), and no intergroup significant difference was found for the OP volume. Rapid maxillary expansion creates a significant increase in nasal passage airway volume but no significant change in the oropharyngeal airway volume.

Management of an endo perio lesion in a maxillary canine using platelet-rich plasma concentrate and an alloplastic bone substitute

PubMed Central

Singh, Sangeeta

2009-01-01

To evaluate the efficacy of platelet-rich plasma concentrate in the management of a cirumferential, infrabony defect associated with an endoperio lesion in a maxillary canine. A 45 year-old male patient with an endoperio lesion in the left maxillary canine was initially treated with endodontic therapy. Following the endodontic treatment, the circumferential, infrabony defect was treated using platelet-rich plasma and an alloplastic bone substitute. At the end of three months, there was a gain in the clinical attachment level and reduction in probing depth. Radiographic evidence showed that there was significant bony fill. The results were maintained at the time of recall nine months later. PMID:20407658

Relationship between degree of malocclusion and occlusal interference in mice that spontaneously develop anterior transverse crossbite.

PubMed

Tsukamoto, Yuri; Kajii, Takashi S; Sugawara-Kato, Yuki; Hirabayashi, Yoshifumi; Fujimori, Osamu; Iida, Junichiro

2010-12-01

Mice with brachymorphism (bm) have defective chondrogenesis, including abnormal growth of the spheno-occipital synchondrosis. Malocclusion (anterior transverse crossbite) sometimes spontaneously occurs in inbred BALB/c-bm/bm mice, before the mandibular incisors erupt and make contact with the maxillary incisors. The aim of this study was to determine whether functional lateral loads to incisors promote anterior transverse crossbites in BALB/c-bm/bm mice. BALB/c-bm/bm mice with normal occlusion (normal group), BALB/c-bm/bm mice with malocclusion in which the incisors were not cut (mal group), and BALB/c-bm/bm mice in which the incisors had been cut to eliminate the functional lateral load during continued growth (mal-cut group) were used. We examined the amounts of shift of the maxillary and mandibular incisors in each group using radiographic images. The amount of shift of the maxillary incisors in the mal group was significantly greater than that in normal group. The total amount of shift from the maxilla to the mandible in the mal group was significantly greater than in the normal and mal-cut groups. The results suggest that a continuous functional lateral load to the incisors is strongly related to promoting and worsening anterior transverse crossbite in BALB/c-bm/bm mice. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Maxillary sinusitis and periapical abscess following periodontal therapy: a case report using three-dimensional evaluation.

PubMed

Huang, Chih-Hao; Brunsvold, Michael A

2006-01-01

Maxillary sinusitis may develop from the extension of periodontal disease. In this case, reconstructed three-dimensional images from multidetector spiral computed tomographs were helpful in evaluating periodontal bony defects and their relationship with the maxillary sinus. A 42-year-old woman in good general health presented with a chronic deep periodontal pocket on the palatal and interproximal aspects of tooth #14. Probing depths of the tooth ranged from 2 to 9 mm, and it exhibited a Class 1 mobility. Radiographs revealed a close relationship between the root apex and the maxillary sinus. The patient's periodontal diagnosis was localized severe chronic periodontitis. Treatment of the tooth consisted of cause-related therapy, surgical exploration, and bone grafting. A very deep circumferential bony defect at the palatal root of tooth #14 was noted during surgery. After the operation, the wound healed without incidence, but 10 days later, a maxillary sinusitis and periapical abscess developed. To control the infection, an evaluation of sinus and alveolus using computed tomographs was performed, systemic antibiotics were prescribed, and endodontic treatment was initiated. Two weeks after surgical treatment, the infection was relieved with the help of antibiotics and endodontic treatment. Bilateral bony communications between the maxillary sinus and periodontal bony defect of maxillary first molars were shown on three-dimensional computed tomographs. The digitally reconstructed images added valuable information for evaluating the periodontal defects. Three-dimensional images from spiral computed tomographs (CT) aided in evaluating and treating the close relationship between maxillary sinus disease and adjacent periodontal defects.

A New Species of Culex (melanoconion) from Southern South America (Diptera: Culicidae)

DTIC Science & Technology

1984-01-01

length about 1.7 mm. Proboscis with false joint about 0.6 from base . Maxillary palpus entirely dark; length about 2.3 mm, exceeding proboscis...rows of small setae extending from base to level of subapical lobe, lateral surface with patch of short sparse setae (lsp, Fig. 3) at level of...anterior margin thickened, dorsal end narrowly fused to base of lateral plate; distal part of lateral plate with apical, ventral and lateral

Palatal versus vestibular piezoelectric window osteotomy for maxillary sinus elevation: a comparative clinical study of two surgical techniques.

PubMed

Stübinger, Stefan; Saldamli, Belma; Seitz, Oliver; Sader, Robert; Landes, Constantin A

2009-05-01

The goal of this study was to compare the surgical advantages and disadvantages of a new palatal access osteotomy for sinus elevation with a conventional lateral approach. In 32 patients, either a palatal (n = 16) or a lateral (n = 16) osteotomy to the maxillary sinus was performed under local anesthesia. The palatal access included a circular paramarginal incision and elevation of a palatal mucosal flap based on a median pedicle. The lateral access was performed by vestibular standard incision and development of a mucoperiosteal flap with a vestibular and superior basis. For all osteotomies a piezoelectric device was used. The sinus cavity was augmented with synthetic nanostructured hydroxyapatite graft material. Intraoperative complications during both procedures were minimal and wound healing was uneventful. Membrane perforation occurred in 19% of the palatal group and in 19% of the lateral group. Soft tissue management of the palatal technique was superior to that of the lateral approach, because the vestibular anatomy was not altered and consequently no disharmonious soft tissue scarring and no postoperative swelling occurred. The palatal approach permitted higher postoperative comfort, especially for edentulous patients, because full dentures could be incorporated directly after surgery with almost perfect fit.

Retrospective chart analysis on survival rate of fixtures installed at the tuberosity bone for cases with missing unilateral upper molars: a study of 7 cases.

PubMed

Park, Young-Jin; Cho, Sung-Am

2010-06-01

To evaluate the survival rate of implants placed in the maxillary tuberosity region using the fixed prosthesis in partially edentulous cases. Of implant-treated patients who visited Kyung Pook National University Hospital, 7 partially edentulous patients (2 male and 5 female; mean age, 52.3 years; range, approximately 43 to 65) were selected according to the following criteria: 1) less than 3-mm thickness alveolar bone reaming at the first molar area and 2) 1 to 2 fixture premolars, with the additional implant at the maxillary tuberosity region. For the control group, patients who had nontuberosity areas were selected. After 1 to 7 years, marginal bone level, fixture mobility, and radiolucency of tuberosity fixtures of the fixed prostheses were evaluated by digital panorama (Starpacs, Infinitt, Seoul, Korea). None of the fixtures of the tuberosity-installed implants for 1 to 7 years failed. The marginal bone level around the implants of the maxillary tuberosity 1 to 6 years (average 3.4 years) after the final prostheses was approximately 0.6 to 1.3 mm, with an average of 0.94 mm. The fixture installation at the maxillary tuberosity using the unilateral partially edentulous implant-fixed prosthesis would be a clinically acceptable treatment module. 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Prevalence of dental anomalies in a population of cleft lip and palate patients.

PubMed

Al Jamal, Ghaida A; Hazza'a, Abdalla M; Rawashdeh, Ma'amon A

2010-07-01

The aim of our study was to investigate radiographically the prevalence of dental anomalies in a group of Jordanian cleft lip and/or palate subjects. This is a retrospective review of panoramic radiographs of 78 subjects with cleft lip and/or palate that were evaluated from their file records and investigated for possible dental anomalies. Dental anomalies were found frequently in cleft lip and/or palate subjects. Missing teeth were found in 66.7% of the patients; the tooth most commonly missing was the maxillary lateral incisor. Supernumerary teeth were found in 16.7% of patients; 37% had microdontia; 70.5% had taurodontism; 30.8% had transposition and/or ectopic teeth; 19.2% had dilacerations; and 30.8% had hypoplastic teeth. There was no statistically significant difference in the above anomalies' prevalence between males and females. However, it was found that subjects with bilateral cleft lip and/or palate had significantly more microdontia (p = .005), dilaceration (p = .002), and hypoplastic teeth (p = .0001) than subjects with unilateral cleft lip and/or palate. The prevalence of dental anomalies in cleft lip and/or palate patients was higher than what had been reported in the normal Jordanian population. This emphasizes the relation of cleft lip and/or palate to all dental anomalies studied. Although our study represents a thorough and complete description of dental anomalies present in a sample of cleft lip and/or palate subjects, larger samples are required to effectively determine the relationship of each dental anomaly with cleft type.

Combined periodontic-orthodonticendodontic interdisciplinary approach in the treatment of periodontally compromised tooth

PubMed Central

Deepa, D; Mehta, D. S.; Puri, Viren K.; Shetty, Sadashiva

2010-01-01

Orthodontic treatment in adult patients is one of the most frequently encountered components involving multidisciplinary approaches. In the present report, a 28-year-old male patient was treated for localized chronic periodontitis with pocket formation, mobility, pathologic migration and malalignment of maxillary left lateral incisor tooth #22. The periodontal therapy included motivation, education and oral-hygiene instructions (O.H.I.), scaling and root planing and periodontal flap surgery. Subsequently on resolution of periodontal inflammation, orthodontic therapy was carried out using the orthodontic aligner for a period of 6 months. Post-treatment (3 years) results showed complete resolution of infrabony pocket with significant bone fill, reduced tooth mobility and complete alignment of the affected maxillary left lateral incisor, thus restoring the esthetics and function. PMID:21691554

Nasomaxillary hypoplasia with a congenitally missing tooth treated with LeFort II osteotomy, autotransplantation, and nickel-titanium alloy wire.

PubMed

Ishida, Takayoshi; Ikemoto, Shigehiro; Ono, Takashi

2015-09-01

In some skeletal Class III adult patients with nasomaxillary hypoplasia, the LeFort I osteotomy provides insufficient correction. This case report describes a 20-year-old woman with a combination of nasomaxillary hypoplasia and a protrusive mandible with a congenitally missing mandibular second premolar. We performed a LeFort II osteotomy for maxillary advancement. Autotransplantation of a tooth was also performed; the donor tooth was used to replace the missing permanent tooth. To increase the chance of success, we applied light continuous force with an improved superelastic nickel-titanium alloy wire technique before extraction and after transplantation. The patient's profile and malocclusion were corrected, and the autotransplanted tooth functioned well. The postero-occlusal relationships were improved, and ideal overbite and overjet relationships were achieved. The methods used in this case represent a remarkable treatment. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Health of periodontal tissues and resorption status after orthodontic treatment of impacted maxillary canines.

PubMed

Oz, A Z; Ciger, S

2018-03-01

The aim of the present study was to evaluate the changes of incisor root resorption associated with impacted maxillary canines and health of periodontal tissues around maxillary canines erupted with orthodontic treatment. Twenty patients with a unilateral palatally impacted maxillary canine were included in the study. Cone-beam computed tomography images taken before and after orthodontic treatment were compared with the contralateral canines serving as control teeth. Root resorption was present in 10% of central and 40% of lateral incisors before treatment. After treatment, the incidence of resorption decreased. The thickness of the buccal bone surrounding the impacted canines was similar to that surrounding the contralateral canines, except in the apical area. Periodontal pocket depth and alveolar bone loss were greater for the impacted canine teeth than for the contralateral canines. Incisor root resorption associated with impacted canine teeth showed signs of repair after orthodontic treatment. Slight differences related to periodontal health were found between the previously impacted teeth and contralateral canine teeth.

Long-term skeletal and dental changes in patients with cleft lip and palate after maxillary distraction: a report of three cases treated with a rigid external distraction device.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2005-04-01

We examined long-term skeletal and dental changes in three patients with cleft lip and palate who underwent maxillary distraction using a rigid external distraction device. Two were children, and one was an adult. Changes in the overjet (OJ), overbite (OB), and positions of the anterior nasal spine (ANS), upper incisors (U1), pogonion (Pog), and lower incisors (L1) were measured on preoperative to 36 months postoperative lateral-cephalograms. In the adult, the positions of all examination points were relatively stable from 6 to 36 months postoperatively, and the OJ and OB were maintained at over 2 mm at 36 months. In the children, the positions of ANS and U1 changed inferiorly, Pog and L1 changed anteroinferiorly, and OJ and OB tended to decrease from 6 to 36 months postoperatively. Long-term skeletal and dental stability following maxillary distraction was relatively well maintained in the adult patient. In the children, the maxillomandibular growth was observed after maxillary distraction, but the mandibular overgrowth might have been inhibited by the correction of class III dentoskeletal deformity resulting from the maxillary distraction.

Timing and sequence of primary tooth eruption in children with cleft lip and palate

PubMed Central

KOBAYASHI, Tatiana Yuriko; GOMIDE, Márcia Ribeiro; CARRARA, Cleide Felício de Carvalho

2010-01-01

Objective To determine the timing and sequence of eruption of primary teeth in children with complete bilateral cleft lip and palate. Material and Methods This cross-sectional study was conducted at the Hospital for Rehabilitation of Craniofacial Anomalies of the University of São Paulo, Bauru, SP, Brazil, with a sample of 395 children (128 girls and 267 boys) aged 0 to 48 months, with complete bilateral cleft lip and palate Results Children with complete bilateral clefts presented a higher mean age of eruption of all primary teeth for both arches and both genders, compared to children without clefts. This difference was statistically significant for all teeth, except for the maxillary first molar. Mean age of eruption of most teeth was lower for girls compared to boys. The greatest delay was found for the maxillary lateral incisor, which was the eighth tooth of children with clefts of both genders. Analyzing by gender, the maxillary lateral incisor was the eighth tooth to erupt in girls and the last in boys. Conclusion The results suggest an interference of the cleft on the timing and sequence of eruption of primary teeth. PMID:20856997

ORAL FINDINGS IN PATIENTS WITH APERT SYNDROME

PubMed Central

Dalben, Gisele da Silva; Neves, Lucimara Teixeira das; Gomide, Marcia Ribeiro

2006-01-01

Introduction: The Apert syndrome is a rare disorder of autosomal dominant inheritance caused by mutations in the FGFR2 gene at locus 10q26; patients with this syndrome present severe syndactyly, exophthalmia, ocular hypertelorism and hypoplastic midface with Class III malocclusion, besides systemic alterations. Most investigations available on the Apert syndrome address the genetic aspect or surgical management, with little emphasis on the oral aspects. Objective: to investigate the oral findings, including dental anomalies, ectopic eruption of the maxillary permanent first molars and soft tissue alterations, in subjects with Apert syndrome. Material and methods: clinical and radiographic examination of nine patients with Apert syndrome, aged 6 to 15 years, not previously submitted to orthodontic or orthognathic treatment. Results: dental anomalies were present in all patients, with one to eight anomalies per individual. The most frequent anomalies were tooth agenesis, mainly affecting maxillary canines, and enamel opacities (44.4% for both). Ectopic eruption of maxillary first molars was found in 33.3% of patients; lateral palatal swellings were observed in 88.8% of patients. Conclusions: The occurrence of typical lateral palatal swellings agrees with the literature. The high prevalence of dental anomalies and ectopic eruption may suggest a possible etiologic relationship with the syndrome. PMID:19089249

Diagnostic tools in maxillofacial fractures: Is there really a need of three-dimensional computed tomography?

PubMed Central

Shah, Sheerin; Uppal, Sanjeev K.; Mittal, Rajinder K.; Garg, Ramneesh; Saggar, Kavita; Dhawan, Rishi

2016-01-01

Introduction: Because of its functional and cosmetic importance, facial injuries, especially bony fractures are clinically very significant. Missed and maltreated fractures might result in malocclusion and disfigurement of the face, thus making accurate diagnosis of the fracture very essential. In earlier times, conventional radiography along with clinical examination played a major role in diagnosis of maxillofacial fractures. However, it was noted that the overlapping nature of bones and the inability to visualise soft tissue swelling and fracture displacement, especially in face, makes radiography less reliable and useful. Computed tomography (CT), also called as X-ray computed radiography, has helped in solving this problem. This clinical study is to compare three-dimensional (3D) CT reconstruction with conventional radiography in evaluating the maxillofacial fractures preoperatively and effecting the surgical management, accordingly. Materials and Methods: Fifty patients, with suspected maxillofacial fractures on clinical examination, were subjected to conventional radiography and CT face with 3D reconstruction. The number and site of fractures in zygoma, maxilla, mandible and nose, detected by both the methods, were enumerated and compared. The final bearing of these additional fractures, on the management protocol, was analysed. Results: CT proved superior to conventional radiography in diagnosing additional number of fractures in zygoma, maxilla, mandible (subcondylar) and nasal bone. Coronal and axial images were found to be significantly more diagnostic in fracture sites such as zygomaticomaxillary complex, orbital floor, arch, lateral maxillary wall and anterior maxillary wall. Conclusion: 3D images gave an inside out picture of the actual sites of fractures. It acted as mind's eye for pre-operative planning and intra-operative execution of surgery. Better surgical treatment could be given to 33% of the cases because of better diagnostic ability of CT. PMID:27833286

Diagnostic tools in maxillofacial fractures: Is there really a need of three-dimensional computed tomography?

PubMed

Shah, Sheerin; Uppal, Sanjeev K; Mittal, Rajinder K; Garg, Ramneesh; Saggar, Kavita; Dhawan, Rishi

2016-01-01

Because of its functional and cosmetic importance, facial injuries, especially bony fractures are clinically very significant. Missed and maltreated fractures might result in malocclusion and disfigurement of the face, thus making accurate diagnosis of the fracture very essential. In earlier times, conventional radiography along with clinical examination played a major role in diagnosis of maxillofacial fractures. However, it was noted that the overlapping nature of bones and the inability to visualise soft tissue swelling and fracture displacement, especially in face, makes radiography less reliable and useful. Computed tomography (CT), also called as X-ray computed radiography, has helped in solving this problem. This clinical study is to compare three-dimensional (3D) CT reconstruction with conventional radiography in evaluating the maxillofacial fractures preoperatively and effecting the surgical management, accordingly. Fifty patients, with suspected maxillofacial fractures on clinical examination, were subjected to conventional radiography and CT face with 3D reconstruction. The number and site of fractures in zygoma, maxilla, mandible and nose, detected by both the methods, were enumerated and compared. The final bearing of these additional fractures, on the management protocol, was analysed. CT proved superior to conventional radiography in diagnosing additional number of fractures in zygoma, maxilla, mandible (subcondylar) and nasal bone. Coronal and axial images were found to be significantly more diagnostic in fracture sites such as zygomaticomaxillary complex, orbital floor, arch, lateral maxillary wall and anterior maxillary wall. 3D images gave an inside out picture of the actual sites of fractures. It acted as mind's eye for pre-operative planning and intra-operative execution of surgery. Better surgical treatment could be given to 33% of the cases because of better diagnostic ability of CT.

Comparison of the intrusion effects on the maxillary incisors between implant anchorage and J-hook headgear.

PubMed

Deguchi, Toru; Murakami, Takashi; Kuroda, Shingo; Yabuuchi, Toshinori; Kamioka, Hiroshi; Takano-Yamamoto, Teruko

2008-05-01

Recently, miniscrews have been used to provide anchorage during orthodontic treatment, especially for incisor intrusion. Miniscrews during incisor intrusion are commonly used in implant orthodontics. Traditionally, effective incisor intrusion has been accomplished with J-hook headgear. In this study, we compared the effect of incisor intrusion, force vector, and amount of root resorption between implant orthodontics and J-hook headgear. Lateral cephalometric radiographs from 8 patients in the implant group and 10 patients in the J-hook headgear group were analyzed for incisor retraction. The estimated force vector was analyzed in the horizontal and vertical directions in both groups. Root resorption was also measured on periapical radiographs. In the implant group, significant reductions in overjet, overbite, maxillary incisor to palatal plane, and maxillary incisor to upper lip were observed after intrusion of the incisors. In the J-hook headgear group, significant reductions in overjet, overbite, maxillary incisor to upper lip, and maxillary incisor to SN plane were observed after intrusion of the incisors. There were significantly greater reductions in overbite, maxillary incisor to palatal plane, and maxillary incisor to upper lip in the implant group than in the J-hook headgear group. Estimated force analysis resulted in significantly more force in the vertical direction and less in the horizontal direction in the implant group. Furthermore, significantly less root resorption was observed in the implant group compared with the J-hook headgear group. The maxillary incisors were effectively intruded by using miniscrews as orthodontic anchorage without patient cooperation. The amount of root resorption was not affected by activating the ligature wire from the miniscrew during incisor intrusion.

Use of repeat anterior maxillary distraction to correct residual midface hypoplasia in cleft patients.

PubMed

Richardson, Sunil; Krishna, Shreya; Bansal, Avi

2017-12-01

The study was designed to evaluate the efficacy of performing a second, repeat anterior maxillary distraction (AMD) to treat residual cleft maxillary hypoplasia. Five patients between the ages of 12 to 15 years with a history of AMD and with residual cleft maxillary hypoplasia were included in the study. Inclusion was irrespective of gender, type of cleft lip and palate, and the amount of advancement needed. Repeat AMD was executed in these patients 4 to 5 years after the primary AMD procedure to correct the cleft maxillary hypoplasia that had developed since the initial procedure. Orthopantomogram (OPG) and lateral cephalograms were taken for evaluation preoperatively, immediately after distraction, after consolidation, and one year postoperatively. The data obtained was tabulated and a Mann Whitney U-test was used for statistical comparisons. At the time of presentation, a residual maxillary hypoplasia was observed with a well maintained distraction gap on the OPG which ruled out the occurrence of a relapse. Favorable movement of the segments without any resistance was seen in all patients. Mean maxillary advancement of 10.56 mm was achieved at repeat AMD. Statistically significant increases in midfacial length, SNA angle, and nasion perpendicular to point A distance was achieved ( P =0.012, P =0.011, and P =0.012, respectively). Good profile was achieved for all patients. Minimal transient complications, for example anterior open bite and bleeding episodes, were managed. Addressing the problem of cleft maxillary hypoplasia at an early age (12-15 years) is beneficial for the child. Residual hypoplasia may develop in some patients, which may require additional corrective procedures. The results of our study show that AMD can be repeated when residual deformity develops with the previous procedure having no negative impact on the results of the repeat procedure.

Comparative evaluation of maxillary protraction with or without skeletal anchorage.

PubMed

Sar, Cağla; Arman-Özçırpıcı, Ayça; Uçkan, Sina; Yazıcı, A Canan

2011-05-01

The aim of this prospective clinical study was to evaluate the skeletal, dentoalveolar, and soft-tissue effects of maxillary protraction with miniplates compared with conventional facemask therapy and an untreated Class III control group. Forty-five subjects who were in prepubertal or pubertal skeletal growth periods were included in the study and divided into 3 groups of 15 patients each. All subjects had skeletal and dental Class III malocclusions with maxillary deficiency, vertically normal growth pattern, anterior crossbite, Angle Class III molar relationship, normal or increased overbite, and retrusive nasomaxillary complex. Before maxillary protraction, rapid maxillary expansion with a bonded appliance was performed in both treatment groups. In the first group (MP+FM), consisting of 5 girls and 10 boys (mean age, 10.91 years), facemasks were applied from 2 titanium miniplates surgically placed laterally to the apertura piriformis regions of the maxilla. The second group (FM) of 7 girls and 8 boys (mean age, 10.31 years) received maxillary protraction therapy with conventional facemasks applied from hooks of the rapid maxillary expansion appliance. The third group of 8 girls and 7 boys (mean age, 10.05 years) was the untreated control group. Lateral cephalometric films were obtained at the beginning and end of treatment or observation in all groups and analyzed according to a structural superimposition method. Measurements were evaulated statistically with Wilcoxon and Kruskal-Wallis tests. Treatment periods were 6.78 and 9.45 months in the MP+FM and FM groups, respectively, and the observation period in the control group was 7.59 months. The differences were significant between the 3 groups (P <0.05) and the MP+FM and FM groups (P <0.001). The maxilla moved forward for 2.3 mm in the MP+FM group and 1.83 mm in the FM group with maxillary protraction. The difference was significant between 2 groups (P <0.001). The protraction rates were 0.45 mm per month in the MP+FM group and 0.24 mm per month in the FM group (P <0.001). The maxilla showed anterior rotation after facemask therapy in the FM group (P <0.01); there was no significant rotation in the MP+FM group. Posterior rotation of the mandible and increased facial height were more evident in the FM group compared with the MP+FM group (P <0.01). Both the maxilla and the mandible moved forward significantly in the control group. Protrusion and mesialization of the maxillary teeth in the FM group were eliminated in the MP+FM group. The maxillomandibular relationships and the soft-tissue profile were improved remarkably in both treatment groups. The undesired effects of conventional facemask therapy were reduced or eliminated with miniplate anchorage, and efficient maxillary protraction was achieved in a shorter treatment period. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

An Anatomical Study of Maxillary-Zygomatic Complex Using Three-Dimensional Computerized Tomography-Based Zygomatic Implantation

PubMed Central

Zhao, Shijie; Liu, Hui; Sun, Zhipeng; Wang, Jianwei

2017-01-01

Objective To obtain anatomical data of maxillary-zygomatic complex based on simulating the zygomatic implantation using cadaver heads and three-dimensional computerized tomography (3D-CT). Methods Simulating zygomatic implantation was performed using seven cadaver heads and 3D-CT images from forty-eight adults. After measuring the maxillary-zygomatic complex, we analyzed the position between the implantation path and the maxillary sinus cavity as well as the distance between the implantation path and the zygomatic nerve. Results The distance from the starting point to the endpoint of the implant was 56.85 ± 5.35 mm in cadaver heads and 58.15 ± 7.37 mm in 3D-CT images. For the most common implantation path (80.20%), the implant went through the maxillary sinus cavity completely. The projecting points of the implant axis (IA) on the surface of zygoma were mainly located in the region of frontal process of zygomatic bone close to the lateral orbital wall. The distances between IA and zygomatic nerve in 53 sides were shorter than 2 mm. Conclusion The simulating zygomatic implantation on cadaver skulls and 3D-CT imaging provided useful anatomical data of the maxillary-zygomatic complex. It is necessary to take care to avoid the zygomatic nerve injury during implantation, because it frequently appears on the route of implantation. PMID:29376077

Changes in nasorespiratory function in association with maxillary distraction osteogenesis in subjects with cleft lip and palate.

PubMed

Saito, Kiyo; Ono, Takashi; Mochida, Masumi; Ohyama, Kimie

2006-01-01

The current study aimed to determine how nasorespiratory function changes in association with maxillary distraction osteogenesis (DO). Furthermore, with regard to impaired nasorespiratory function, the possibility of a relationship between the cleft side and laterality and any effect of maxillary distraction osteogenesis was investigated. In this descriptive, prospective clinical report, subjective and objective data regarding nasorespiratory function before and after maxillary distraction osteogenesis were compared. Data from 13 subjects with cleft lip and palate were used. Subjects had a severe maxillary deficiency and underwent distraction osteogenesis using a rigid external device system. The subjective measure was the score on a questionnaire regarding nasorespiratory function using a visual analog scale. The objective measure was nasal resistance. The visual analog scale score for two items significantly decreased just after distraction osteogenesis. Nasal resistance also significantly decreased 1 year after distraction osteogenesis. Moreover, nasal resistance on the cleft side was significantly greater than that on the noncleft side just before and 1 year after distraction osteogenesis. There was a significant positive correlation between changes in the visual analog scale score and nasal resistance. These results suggest that nasorespiratory function changes in association with maxillary distraction osteogenesis in subjects with cleft lip and palate. Moreover, it appears that nasal obstruction on the cleft side does not change in subjects with unilateral cleft lip and palate.

Endodontic management of an unusual maxillary first molar with a single buccal root.

PubMed

Nayak, Gurudutt; Dahiya, Surya; Singh, Inderpreet; Mohammad, Faiz Hasan

2014-05-01

The aim of this clinical article is to describe the unusual anatomy that was detected in a maxillary first molar during routine endodontic treatment. Variation in Root and Root canal morphology especially in multirooted teeth presents a constant challenge for a clinician in their detection and management. The literature is replete with cases that have extra canal or Root but cases with fused Root and fewer numbers of canals are sparse. This case report describes the endodontic management of one such unusual case of maxillary first molar presenting with a single fused buccal and a palatal Root. The confirmatory diagnosis of this morphologic aberration was done with the help of spiral computerized tomography, which revealed that the contralateral tooth also had a similar morphology. Dental practitioners should always be aware of the fact that abnormalities need not be in form of extra Roots or Root canals; anomalies can also be in form of fewer number of Roots or Root canals. A thorough knowledge of the complexities and variations of the Root canal system would help in avoiding some of the common iatrogenic access opening errors like perforations and excessive tooth removal caused during the search for the missing or extracanal.

Surgical landmarks of the nasopharyngeal internal carotid using the maxillary swing approach: A cadaveric study.

PubMed

Simon, François; Vacher, Christian; Herman, Philippe; Verillaud, Benjamin

2016-07-01

Surgery of the paranasopharyngeal space is very hazardous due to the position of the internal carotid artery, which is surrounded by soft tissue with few anatomical landmarks. Fresh cadaveric study. In this study, we used the maxillary swing procedure to have a broad view of the internal carotid artery using an anterior approach. We sought to establish surgical landmarks, make measurements, and compare them to other imagery and cadaveric studies in the literature. We performed the maxillary swing procedure in 10 subjects (six female and four male, mean deceased age 81 years). The internal carotid artery was found to be in the same sagittal plane as the lateral pterygoid plate, the foramen ovale, and the eustachian tube isthmus. It was always located behind the stylopharyngeal fascia and immediately lateral to the longus capitis muscle. The artery was measured on average 10.7 mm from the pharyngeal recess, 7.3 mm from the eustachian tube isthmus, and 22.8 mm from the torus tubarius. The eustachian tube isthmus, the longus capitis muscle, and the stylopharyngeal fascia are the main surgical landmarks of the internal carotid artery. The artery can also be found in an oblique sagittal plane including the eustachian tube isthmus, the foramen ovale, and the lateral pterygoid plate. The pharyngeal recess remains a very dangerous area, only millimeters away from the carotid artery. NA Laryngoscope, 126:1562-1566, 2016. © 2016 The American Laryngological, Rhinological and Otological Society, Inc.

Skeletal and soft tissue changes and stability in cleft lip and palate patients after distraction osteogenesis using a new intraoral maxillary device.

PubMed

Ansari, Edward; Tomat, Catherine; Kadlub, Natacha; Diner, Patrick A; Bellocq, Thomas; Vazquez, Marie-Paule; Picard, Arnaud

2015-04-01

The authors have recently reported on the use of an internal maxillary distraction device. In this study, we report on the hard and soft tissue movements achieved with this intraoral distraction device, and the stability changes after distraction osteogenesis for maxillary hypoplasia in patients with cleft lip and palate. Ten male patients with severe hypoplasia of the maxilla, with complete uni- or bilateral cleft lip and palate were included. The mean age of the patients at the time of operation was 11.91 years (±3.41). To evaluate the distraction process and stability, superimpositions on the preoperative lateral cephalograms were performed. The mean follow-up (FU) was 15.42 months (±3.94). Cephalometric measurements at all of the maxillary hard and soft tissue points improved significantly. Maxillary point A was advanced by 8.25 mm (±3.17; P < 0.001). After distraction soft tissue point A' had advanced 7.10 mm (±2.69; P < 0.001). The soft tissue to hard tissue ratio at point A was 0.86:1 after distraction. Maxillary horizontal relapse at point A was 14.1% at FU. Vertical relapse was not significant. This rigid intraoral distraction device can be successfully used in the correction of severe maxillary hypoplasia. The marked aesthetic improvement and low psychological encumbrance make this device viable for the treatment of cleft-related hypoplasia of the maxilla. Copyright © 2014 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Assessment of vertical changes during maxillary expansion using quad helix or bonded rapid maxillary expander.

PubMed

Conroy-Piskai, Cara; Galang-Boquiren, Maria Therese S; Obrez, Ales; Viana, Maria Grace Costa; Oppermann, Nelson; Sanchez, Flavio; Edgren, Bradford; Kusnoto, Budi

2016-11-01

To determine if there is a significantly different effect on vertical changes during phase I palatal expansion treatment using a quad helix and a bonded rapid maxillary expander in growing skeletal Class I and Class II patients. This retrospective study looked at 2 treatment groups, a quad helix group and a bonded rapid maxillary expander group, before treatment (T1) and at the completion of phase I treatment (T2). Each treatment group was compared to an untreated predicted growth model. Lateral cephalograms at T1 and T2 were traced and analyzed for changes in vertical dimension. No differences were found between the treatment groups at T1, but significant differences at T2 were found for convexity, lower facial height, total facial height, facial axis, and Frankfort Mandibular Plane Angle (FMA) variables. A comparison of treatment groups at T2 to their respective untreated predicted growth models found a significant difference for the lower facial height variable in the quad helix group and for the upper first molar to palatal plane (U6-PP) variable in the bonded expander group. Overall, both the quad helix expander and the bonded rapid maxillary expander showed minimal vertical changes during palatal expansion treatment. The differences at T2 suggested that the quad helix expander had more control over skeletal vertical measurements. When comparing treatment results to untreated predicted growth values, the quad helix expander appeared to better maintain lower facial height and the bonded rapid maxillary expander appeared to better maintain the maxillary first molar vertical height.

A Different Pontic Design for Fiber-Reinforced Composite Bridgeworks: A Clinical Report

PubMed Central

Kumbuloḡlu, Ovul; Özdemir, Niler; Aksoy, Gökhan; User, Atilla

2007-01-01

Objectives This clinical report describes a relatively simple but esthetic, non-invasive and functional prosthodontic treatment option for a patient with missing tooth. Methods A patient with a missing maxillary left canine was non-invasively treated with a fiber reinforced composite (FRC) bridgework with an all ceramic (Empress II, Ivoclar Vivadent, Schaan, Liech-tenstein) pontic design, using laboratory technique. Results The restoration has served the patient for 2 year, seemingly without discomfort, and it has not required any maintenance. The patient has kept up with his oral hygiene. Conclusions Although additional clinical experience is necessary, fiber-reinforced composite materials can be used in combination with a lithium disilicate ceramic material in fixed partial dentures. PMID:19212498

Pharyngeal airway changes associated with maxillary distraction osteogenesis in adult cleft lip and palate patients.

PubMed

Aksu, Muge; Taner, Tülin; Sahin-Veske, Pınar; Kocadereli, Ilken; Konas, Ersoy; Mavili, Mehmet Emin

2012-02-01

To investigate 1) the changes in pharyngeal airway sizes associated with maxillary distraction osteogenesis and 2) the correlations between maxillary skeletal variables and the pharyngeal airway in adult patients with cleft lip and palate. The study was carried out in 14 adult subjects with cleft lip and palate. Predistraction records were taken at a mean age of 22.7 ± 4.6 years. All patients had placement of a rigid external distraction device (RED I; KLS Martin, Tuttlingen, Germany) after Le Fort I osteotomy. Lateral cephalograms were assessed before surgery and at short-term follow-up (8.0 ± 6.4 months). The cephalometric skeletal and pharyngeal airway variables were statistically evaluated by use of the Wilcoxon signed-rank test. Spearman ρ correlation was performed to check the correlations between maxillary skeletal and pharyngeal variables. The maxillary movement was 8.7 mm (P < .01). The maxillary depth angle (+7.9°) and effective maxillary length (9.4 mm) increased significantly (P < .01) after distraction, whereas the palatal plane angle remained unchanged. Anterior nasal spine (8.2 mm) and Posterior nasal spine (6.9 mm) moved anteriorly. The overjet increased (9.5 mm) significantly (P < .01). Posterior, superoposterior, and middle airway spaces increased significantly, with mean differences of 7.5 mm, 5.1 mm, and 3.3 mm, respectively. The soft palate moved anteriorly, with the greatest movement at its superior point. Significant positive correlations were observed for the posterior and superoposterior airway spaces and maxillary movement. PNS changes showed the highest correlation with posterior airway changes. The significant anterior movement of the maxilla resulted in significant increases in posterior, superoposterior, and middle airway spaces. The posterior airway space showed the highest significant positive correlation with the movement of PNS. The posterior and superoposterior airway spaces also showed significant positive correlations with the maxillary skeletal variables. Copyright © 2012 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Biometric analysis of the clinical crown and the width/length ratio in the maxillary anterior region.

PubMed

Orozco-Varo, Ana; Arroyo-Cruz, Gema; Martínez-de-Fuentes, Rafael; Jiménez-Castellanos, Emilio

2015-06-01

Restorative dentistry often involves correcting tooth size discrepancies. Therefore, dental biometrics should play an important role in the planning of an esthetic restoration. The purpose of this study was to analyze the clinical crown width, length, and width/length ratio of maxillary central incisors, lateral incisors, and canines in an adult population. The study also aimed to determine whether a correlation exists between natural tooth dimensions and the optimal tooth dimension guidelines suggested for planning esthetic restorations. Stone casts were poured from irreversible hydrocolloid impressions of 412 healthy adult participants. These casts were used to measure the maximum mesiodistal width and maximum crown-root length of the maxillary central incisors, lateral incisors, and canines with a digital precision caliper (0.01 mm). The width/length ratio was calculated for each tooth, and 40 casts were selected to test the reliability of the measuring method. The mean age of the participants in the sample was 33.94 years; 60.7% were women and 39.3% were men. The mean width value was 8.71 mm for central incisors, 6.75 mm for lateral incisors, and 7.81 mm for canines. The mean length was 10.23 mm for central incisors, 8.59 mm for lateral incisors, and 9.93 mm for canines. The average width/length ratio was 85% for central incisors and 79% for lateral incisors and canines. The data obtained from the population studied are similar to those from previous research studies with similar methodology. However, great discrepancies in the absolute values were found when compared with other studies of ideal tooth dimension guidelines on the personal preferences and the esthetic perception of dentists. The perception of what is considered natural seems to differ from what is considered esthetically perfect. Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Correction of a mutilated dentition with mini-implants as anchorage.

PubMed

Hyun, Jae-Man; Kim, Tae-Woo

2010-11-01

The patient was an adolescent boy, aged 15.6 years, with a mutilated dentition. He had extrusion of the maxillary left first molar because of loss of the mandibular first molar and lingual tilting and rotation of the mandibular second molars. Both left and right second molars were in scissors-bite that was more severe on the left side. By using mini-implants and a TPA with hooks, a 3-mm intrusion was successfully made on the maxillary left first molar. This provided room for mesial movement of the mandibular left second molar. The second molar was protracted into the space of the missing first molar, and the mandibular left third molar was positioned in place of the second molar. The second molars scissors-bite was corrected. Active treatment took 45 months, and the treatment result remained stable 2 years after debonding. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

A clinical report demonstrating the significance of distinguishing a nasopalatine duct cyst from a radicular cyst

PubMed Central

Aparna, Manikkath; Chakravarthy, Arumugam; Acharya, Shashi Rashmi; Radhakrishnan, Raghu

2014-01-01

Endodontic diagnosis is challenging and depends on the organisation of information from the patient history, clinical examination and analysis of the pulp, radiographic and histopathological assessment. A 35-year-old man was endodontically treated for radiolucency in relation to the roots of maxillary central incisors as it was a provisionally diagnosed case of radicular cyst. Since the palatal swelling persisted, the lesion was re-evaluated using relevant diagnostic aids and a diagnosis of nasopalatine duct cyst (NPDC) was made, which was missed during the initial assessment. An erroneous interpretation of cystic radiolucency in relation to maxillary central incisors can often lead to inappropriate treatment planning. This case highlights the relevant aspects in the diagnosis of NPDC when it is mistaken for a radicular cyst and emphasises the need for thorough clinical examination and relevant investigations for periapical radiolucencies of questionable origin before initiating endodontic therapy. PMID:24642171

Autogenous Transplantation for Replacing a Hopeless Tooth.

PubMed

Zakershahrak, Mehrsa; Moshari, Amirabbas; Vatanpour, Mehdi; Khalilak, Zohreh; Jalali Ara, Afsoon

2017-01-01

Autogenous tooth transplantation (ATT) is a simple and reasonable choice for replacing the missing teeth when a proper donor tooth is available. This report presents a case of successful ATT of a maxillary right third molar for replacement of mandibular right second molar with a concomitant endodontic-periodontal disease. The mandibular second molar was believed to be hopeless due to a severe damage to coronal tooth structure, inappropriate root canal treatment and apical radiolucency. After extraction of mandibular second molar and maxillary third molar (the donor), the tooth was re-implanted into the extracted socket of second molar site. Root canal therapy was then performed. After 3 years, clinical and radiographic examinations revealed satisfying results, with no signs and symptoms. The patient is asymptomatic and the transplanted tooth is still functional with no signs of marginal periodontal pathosis. Radiographies showed bone regeneration in the site of previous extensive periapical lesion, normal periodontal ligament with no signs of root resorption.

Maxillary Swelling as the First Evidence of Multiple Myeloma

PubMed Central

Kasamatsu, Atsushi; Kimura, Yasushi; Tsujimura, Hideki; Kanazawa, Harusachi; Koide, Nao; Miyamoto, Isao; Endo-Sakamoto, Yosuke; Shiiba, Masashi; Tanzawa, Hideki; Uzawa, Katsuhiro

2015-01-01

Multiple myeloma is a malignant neoplasm of plasma cells characterized by proliferation of a single clone of abnormal immunoglobulin-secreting plasma cells. Since the amount of hemopoietic bone marrow is decreased in the maxilla, oral manifestations of multiple myeloma are less common in the maxilla than in the mandible. We report the case of 33-year-old Japanese man who presented with a mass in the right maxillary alveolar region. Computed tomography and magnetic resonance images showed a soft tissue mass in the right maxilla eroding the anterior and lateral walls of the maxillary sinus and extending into the buccal space. The biopsy results, imaging, and laboratory investigations led to the diagnosis of multiple myeloma. This case report suggests that oral surgeons and dentists should properly address oral manifestations as first indications of multiple myeloma. PMID:26640721

Masking of Enamel Fluorosis Discolorations and Tooth Misalignment With a Combination of At-Home Whitening, Resin Infiltration, and Direct Composite Restorations.

PubMed

Perdigão, J; Lam, V Q; Burseth, B G; Real, C

This clinical report illustrates a conservative technique to mask enamel discolorations in maxillary anterior teeth caused by hypomineralization associated with enamel fluorosis and subsequent direct resin composite to improve the anterior esthetics. The treatment consisted of at-home whitening with 10% carbamide peroxide gel with potassium nitrate and sodium fluoride in a custom-fitted tray to mask the brown-stained areas, followed by resin infiltration to mask the white spot areas. An existing resin composite restoration in the maxillary right central incisor was subsequently replaced after completion of the whitening and resin infiltration procedures, whereas the two misaligned and rotated maxillary lateral incisors were built up with direct resin composite restorations to provide the illusion of adequate arch alignment, as the patient was unable to use orthodontic therapy.

Conservative treatment of a cervical horizontal root fracture and a complicated crown fracture: a case report.

PubMed

Belobrov, I; Weis, M V; Parashos, P

2008-09-01

Abstract This case report describes successful long-term conservative management of a cervical root fracture and a complicated crown fracture of the maxillary central incisors in a 12-year-old patient. A mineral trioxide aggregate partial pulpotomy was performed on the maxillary right central incisor, while the maxillary left central incisor was splinted to the neighbouring lateral incisor using an acid-etch technique. Both teeth remained asymptomatic throughout the 3.5 years of a review period, with the cervical root fracture having mostly healed with the formation of a calcified tissue between the fragments. Two different treatment methods were used for two different injuries that resulted in pulp preservation in both cases. This in turn has provided for normal root development to occur while also allowing for preservation of bone.

A case of Sotos syndrome treated with distraction osteogenesis in maxilla and mandible.

PubMed

Takano, Masayuki; Kasahara, Kiyohiro; Ogawa, Chiharu; Katada, Hidenori; Sueishi, Kenji

2012-01-01

Sotos syndrome is inherited in an autosomal-dominant manner and is characterized by increased birth weight, excessive growth, advanced bone age, and distinctive facial features, including dolichocephaly, hypertelorism, and a prominent mandible. We treated a jaw deformity due to Sotos syndrome consisting of malocclusion due to a narrow maxillary dental arch and mandibular retrusion from hypoplasia of the rami. The patient was a 17-year-old man. Malocclusion due to a narrow maxillary dental arch and mandibular retrusion was diagnosed. Rapid maxillary expansion with Lines corticotomy and mandibular advancement with distraction osteogenesis were performed. The maxilla was expanded laterally a total of 3 mm and the mandible prolonged 12 mm in the posterior area of the mandibular body. Subsequently, orthodontic treatment was continued. At present, 5 years after surgery, occlusion remains good and stable.

Unilateral and bilateral dental transpositions in the maxilla-dental and skeletal findings in 63 individuals.

PubMed

Danielsen, J C; Karimian, K; Ciarlantini, R; Melsen, B; Kjær, I

2015-12-01

This was to elucidate dental and skeletal findings in individuals with unilateral and bilateral maxillary dental transpositions. The sample comprised of radiographic materials from 63 individuals with maxillary dental transpositions from the Departments of Odontology at the Universities of Copenhagen and Aarhus and by the Danish municipal orthodontic service. The cases were divided into three groups: unilateral transposition of the canine and first premolar (Type 1U), bilateral transposition of canine and first premolar (Type 1B), and unilateral transposition of canine and lateral incisor (Type 2). The dentitions were analysed regarding agenesis and dental morphological anomalies on panoramic radiographs, and craniofacial aspects were cephalometrically analysed on profile images The results were statistically evaluated. All groups demonstrated increased occurrences of agenesis (Type 1U and Type 1B: 31 agenesis in 15 patients; and Type 2 three agenesis in three patients). Taurodontic root morphology was most dominant in Type 1U. Peg-shaped lateral incisors showed an increased occurrence, though not in Type 1U. Skeletally, Type 1B and Type 1U demonstrated maxillary retrognathia (more pronounced in Type 1B). Type 2 showed a significant posterior inclination of the maxilla. Transpositions of maxillary canines involve dental and skeletal deviations. Dental deviations were predominantly taurodontic root morphology and agenesis. Regarding skeletal deviations, bilateral transpositions of the canines and the first premolars are associated with skeletal changes. Unilateral transpositions are possibly a localised deviation with minor or no skeletal involvements. The results indicate a possible difference in the aetiologies of unilateral and bilateral transpositions.

Orthodontic management of a dilacerated central incisor and partially impacted canine with unilateral extraction - A case report.

PubMed

Felicita, A Sumathi

2017-10-01

To align a dilacerated maxillary central incisor and partially impacted canine with unilateral extraction in a young patient with skeletal deep bite. A 14 year old male patient reported to the hospital with skeletal deep bite (basal plane angle-17°), severe horizontal pattern of growth (Go-Gn to Sn -22°), upright maxillary incisors (U1 to NA -26°) and retroclined lower incisors (L1 to NB -11°). The maxillary left central incisor was dilacerated, and the maxillary left canine was partially impacted. Unilateral extraction of the left maxillary premolar and left mandibular central incisor was done. A canine disimpaction spring was used to align the impacted canine. An anterior bite plane was given to open the bite. Superimposition of lateral cephalogram (T1, T2) revealed bite opening, normal overjet and overbite. There was backward rotation of the mandible and increase in lower anterior facial height. There was no evidence of root resorption or loss of vitality in the dilacerated tooth. Clinically the canine was well aligned in the arch. Orthodontic management of a dilacerated incisor can be done without root resorption or loss of vitality. The partially impacted canine was well aligned in the arch. Unilateral extraction can produce good treatment results.

Maxillary movement in distraction osteogenesis using internal devices in cleft palate patients.

PubMed

Tomita, Daisuke; Omura, Susumu; Ozaki, Shusaku; Shimazaki, Kazuo; Fukuyama, Eiji; Tohnai, Iwai; Torikai, Katsuyuki

2011-03-01

The purpose of this cephalometric study was to compare the actual movement with the planned movement of the maxilla by using internal maxillary distraction in cleft lip and palate patients. Twelve patients, including eight with unilateral and four with bilateral cleft lip and palate, underwent maxillary advancement with internal maxillary distractors. Lateral cephalometric radiographs obtained preoperatively, predistraction, and postdistraction were used for analysis. The movement of the maxilla, angular change of the internal devices and rotation of the mandible were measured at each stage, and the planned vector of advancement predicted from the placement vector of the distractors was compared with the actual vector. Internal maxillary distractors were rotated in a clockwise direction during the distraction period. The angular change of the distractors was 7.7°. The amount of actual advancement at anterior nasal spine with distraction was 6.3 mm, which represented about 70% of the distance of activation of distraction. The actual advanced vector at anterior nasal spine was 9.7° smaller than the planned vector. The mandible underwent a clockwise rotation of 3.5°. In the internal distraction technique, the maxilla was advanced inferiorly to the planned vector and with a slight clockwise rotation. These results are useful for surgical planning when using internal distractors.

Dental anomalies associated with buccally- and palatally-impacted maxillary canines.

PubMed

Sajnani, Anand K; King, Nigel M

2014-08-01

The aim of the present study was to determine the association of both buccally- and palatally-impacted canines with other dental anomalies. This retrospective study was conducted on a population of 533 southern Chinese children and adolescents who had impacted maxillary canines that had been treated in the Paediatric Dentistry and Orthodontics Clinic, Prince Philip Dental Hospital, The University of Hong Kong, Hong Kong. Descriptions of the impacted canine and other associated anomalies were obtained from the case notes and radiographs. Clinical photographs and study casts were used, where available. A total of 253 (47.5%) patients with impacted maxillary canines were diagnosed with other dental anomalies. Microdontia was the most frequently-occurring anomaly reported in these patients, with the maxillary lateral incisor the most commonly affected tooth. Other odontogenic anomalies that were associated with both buccally- and palatally-impacted canines included hypodontia, supernumerary teeth, transposition of other teeth, enamel hypoplasia, other impacted teeth, and dens invaginatus. Both buccally- and palatally-impacted canines were found to be associated with other odontogenic anomalies. © 2013 Wiley Publishing Asia Pty Ltd.

Influence of maxillary posterior discrepancy on upper molar vertical position and facial vertical dimensions in subjects with or without skeletal open bite

PubMed Central

Aliaga-Del Castillo, Aron; Pérez-Vargas, Luis Fernando; Flores-Mir, Carlos

2016-01-01

Summary Objectives: To determine the influence of maxillary posterior discrepancy on upper molar vertical position and dentofacial vertical dimensions in individuals with or without skeletal open bite (SOB). Materials and methods: Pre-treatment lateral cephalograms of 139 young adults were examined. The sample was divided into eight groups categorized according to their sagittal and vertical skeletal facial growth pattern and maxillary posterior discrepancy (present or absent). Upper molar vertical position, overbite, lower anterior facial height and facial height ratio were measured. Independent t-test was performed to determine differences between the groups considering maxillary posterior discrepancy. Principal component analysis and MANCOVA test were also used. Results: No statistically significant differences were found comparing the molar vertical position according to maxillary posterior discrepancy for the SOB Class I group or the group with adequate overbite. Significant differences were found in SOB Class II and Class III groups. In addition, an increased molar vertical position was found in the group without posterior discrepancy. Limitations: Some variables closely related with the individual’s intrinsic craniofacial development that could influence the evaluated vertical measurements were not considered. Conclusions and implications: Overall maxillary posterior discrepancy does not appear to have a clear impact on upper molar vertical position or facial vertical dimensions. Only the SOB Class III group without posterior discrepancy had a significant increased upper molar vertical position. PMID:26385786

Influence of maxillary posterior discrepancy on upper molar vertical position and facial vertical dimensions in subjects with or without skeletal open bite.

PubMed

Arriola-Guillén, Luis Ernesto; Aliaga-Del Castillo, Aron; Pérez-Vargas, Luis Fernando; Flores-Mir, Carlos

2016-06-01

To determine the influence of maxillary posterior discrepancy on upper molar vertical position and dentofacial vertical dimensions in individuals with or without skeletal open bite (SOB). Pre-treatment lateral cephalograms of 139 young adults were examined. The sample was divided into eight groups categorized according to their sagittal and vertical skeletal facial growth pattern and maxillary posterior discrepancy (present or absent). Upper molar vertical position, overbite, lower anterior facial height and facial height ratio were measured. Independent t-test was performed to determine differences between the groups considering maxillary posterior discrepancy. Principal component analysis and MANCOVA test were also used. No statistically significant differences were found comparing the molar vertical position according to maxillary posterior discrepancy for the SOB Class I group or the group with adequate overbite. Significant differences were found in SOB Class II and Class III groups. In addition, an increased molar vertical position was found in the group without posterior discrepancy. Some variables closely related with the individual's intrinsic craniofacial development that could influence the evaluated vertical measurements were not considered. Overall maxillary posterior discrepancy does not appear to have a clear impact on upper molar vertical position or facial vertical dimensions. Only the SOB Class III group without posterior discrepancy had a significant increased upper molar vertical position. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Comparison of ropivacaine and lidocaine with epinephrine for infiltration anesthesia in dentistry. A randomized study.

PubMed

Krzemiński, Tadeusz Faustyn; Gilowski, Łukasz; Wiench, Rafał; Płocica, Iwona; Kondzielnik, Piotr; Sielańczyk, Andrzej

2011-10-01

To compare the efficacy of maxillary infiltration anesthesia with 0.5% plain ropivacaine or 2% lidocaine with epinephrine 1:100,000. 60 volunteers received 1.8 ml of the anesthetic for infiltration anesthesia of maxillary central and lateral incisors and canine teeth. The onset time and duration of pulp anesthesia were assessed with an electric pulp tester. The duration time of numbness of the upper lip was also monitored. Blood pressure and heart rate were measured before and after administration of the solution. The efficacy of anesthesia of the lateral and central incisors was 100% for both anesthetics. There were small insignificant differences in effectiveness of canine pulp anesthesia. The mean onset time was significantly shorter for ropivacaine--2.2 minutes vs. 5.1 for lidocaine. Ropivacaine also had a significantly longer duration of action--mean time 79.2 minutes. Ropivacaine caused statistically significant increases in blood pressure and heart rate.

Influence of remaining coronal tooth structure on fracture resistance and failure mode of restored endodontically treated maxillary incisors.

PubMed

Santos Pantaleón, Domingo; Morrow, Brian R; Cagna, David R; Pameijer, Cornelis H; Garcia-Godoy, Franklin

2018-03-01

Limited information is available on the effect of an incomplete ferrule because of the varying residual axial wall heights and the volume of residual tooth structure on the fracture resistance of endodontically treated and restored maxillary incisors. The purpose of this in vitro investigation was to examine the effect of varying residual axial wall heights, residual coronal tooth structure, and the absence of 1 proximal axial wall on the fracture resistance and failure mode of endodontically treated teeth restored with metal posts. Sixty intact human maxillary central incisors were divided into 6 groups (n=10): no ferrule (NF), 2-mm complete ferrule (CF2), 2-mm (IF2), 3-mm (IF3), and 4-mm (IF4) incomplete ferrules missing a single interproximal wall, and a control group that had a 6-mm incomplete ferrule (IF6). Cast metal post-and-cores were placed in all experimental specimens except for controls. Control specimens received 1 interproximal cavity preparation extending to the root canal access and a composite resin restoration. Complete metal crowns were then cemented on all specimens. Completed specimens were subjected to thermocycling (6000 cycles, 5°C/55°C) followed by the immediate testing of fracture resistance. Failed specimens were sectioned buccolingually and evaluated to identify the failure mode. The data were analyzed with an analysis of variance (ANOVA) and the Student-Newman-Keuls multiple comparison test (α=.05). An incomplete ferrule (IF2) with 1 interproximal wall missing had significantly reduced fracture resistance (697 N) compared with a complete ferrule (932 N). An increase of 3 to 4 mm of remaining wall height improved fracture resistance, from 844 N (IF3) to 853 N (IF4). Partial decementation was noticed in 8 NF and 5 IF2 specimens. IF3 and IF4 had no decementations. Radicular fractures and cracks (catastrophic failure) were observed in all IF2, IF3, and IF4, 9 CF2, and 6 NF specimens. In 7 specimens without posts (IF6, control), composite resin foundation and/or coronal dentin fracture were observed and the failure was considered repairable. The results of this in vitro study indicated that specimens with a 2-mm ferrule of uniform height were more resistant to fracture than specimens with a 2-mm ferrule and 1 missing interproximal wall. An increased wall height of 3 or 4 mm was associated with a significant increase in fracture resistance and can compensate for the missing interproximal wall. Copyright © 2017 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Orofacial haemangiopericytoma--a rare case.

PubMed

Shetty, S R; Chatra, L; Shenai, K P

2007-10-01

Haemangiopericytoma is an uncommon vascular tumour that originates from small pericapillary spindle-shaped cells. Clinical diagnosis of such a lesion is an extremely challenging task because there are very few detailed reports of such lesions and one would hardly think of a diagnosis such as haemangiopericytoma while examining a lesion. We report here a case of haemangiopericytoma arising from the infratemporal fossa involving the orbit, the lateral wall of the nasal cavity, the maxillary sinus, the maxillary alveolar process and the ethmoidal sinus. The clinical features, radiological findings and differential diagnoses to be considered, and the available treatment options, are discussed in this case report.

Thin-plate spline analysis of the short- and long-term effects of rapid maxillary expansion.

PubMed

Franchi, Lorenzo; Baccetti, Tiziano; Cameron, Christopher G; Kutcipal, Elizabeth A; McNamara, James A

2002-04-01

The aim of this study was to investigate the short- and long-term effects induced by rapid maxillary expansion (RME) on the shape of the maxillary and circummaxillary structures by means of thin-plate spline (TPS) analysis. The sample consisted of 42 patients who were compared with a control sample of 20 subjects. The treated subjects underwent Haas-type RME, followed by fixed appliance therapy. Postero-anterior (PA) cephalograms were analysed for each treated subject at T1 (pre-treatment), T2 (immediate post-expansion), and T3 (long-term observation), and were available at T1 and T3 for the control group (CG). The mean age at T1 was 11 years and 10 months for both groups. The mean chronological ages at T3 were 20 years, 6 months for the treated group (TG) and 17 years, 8 months for the control group. The study focused on shape changes in the maxillary, nasal, zygomatic, and orbital regions. TPS analysis revealed significant shape changes in the TG. They consisted of an upward and lateral displacement of the two halves of the naso-maxillary complex as a result of active expansion in the short-term, and normalization of maxillary shape in the transverse dimension in the long-term (the initial transverse deficiency of the maxilla in the treated group was eliminated by RME therapy both in the short- and long-term). At the end of the observation period, the nasal cavities were larger when compared with both their pre-expansion configuration and the final configuration in the controls. RME with the Haas appliance appears to be an efficient therapeutic means to induce permanent favourable changes in the shape of the naso-maxillary complex.

Biomechanical comparison of two intraoperative mobilization techniques for maxillary distraction osteogenesis: Down-fracture versus non-down-fracture.

PubMed

Yang, Lili; Suzuki, Eduardo Yugo; Suzuki, Boonsiva

2014-01-01

The purpose of this study was to compare the distraction forces and the biomechanical effects between two different intraoperative surgical procedures (down-fracture [DF] and non-DF [NDF]) for maxillary distraction osteogenesis. Eight patients were assigned into two groups according to the surgical procedure: DF, n = 6 versus NDF, n = 2. Lateral cephalograms taken preoperatively (T1), immediately after removal of the distraction device (T2), and after at least a 6 months follow-up period (T3) were analyzed. Assessment of distraction forces was performed during the distraction period. The Mann-Whitney U-test was used to compare the difference in the amount of advancement, the maximum distraction force and the amount of relapse. Although a significantly greater amount of maxillary movement was observed in the DF group (median 9.5 mm; minimum-maximum 7.9-14.1 mm) than in the NDF group (median 5.9 mm; minimum-maximum 4.4-7.6 mm), significantly lower maximum distraction forces were observed in the DF (median 16.4 N; minimum-maximum 15.1-24.6 N) than in the NDF (median 32.9 N; minimum-maximum 27.6-38.2 N) group. A significantly greater amount of dental anchorage loss was observed in the NDF group. Moreover, the amount of relapse observed in the NDF group was approximately 3.5 times greater than in the DF group. In this study, it seemed that, the use of the NDF procedure resulted in lower levels of maxillary mobility at the time of the maxillary distraction, consequently requiring greater amounts of force to advance the maxillary bone. Moreover, it also resulted in a reduced amount of maxillary movement, a greater amount of dental anchorage loss and poor treatment stability.

Maxillary and Mandibular First Premolars Showing Three-Cusp Pattern: An Unusual Presentation

PubMed Central

Kotrashetti, Vijayalakshmi; Nayak, Aarati; Patil, Viraj; Kulkarni, Mayuri; Somannavar, Pradeep

2013-01-01

Dental anatomy is the study of morphology of various teeth in human dentitions. The application of dental anatomy in clinical practice is important, and dentist should have a thorough knowledge regarding the morphology of the teeth. At times as a result of genetic variation, environmental factors, diet of an individual and race, variations in the morphology of the teeth can be observed. These variations have been extensively studied by the researcher in the field of anthropology to define a particular race. The most commonly observed changes include peg-shaped laterals, shovel-shaped incisors, and extra cusp on molar. Common variations documented with regard to maxillary and mandibular first premolars are the variation in the number of roots. But the variations with respect to crown morphology are few. We report a first documented unusual presentation of maxillary and mandibular first premolars with three-cusps pattern in a female patient. PMID:23476817

Preliminary three-dimensional analysis of tooth movement and arch dimension change of the maxillary dentition in Class II division 1 malocclusion treated with first premolar extraction: conventional anchorage vs. mini-implant anchorage.

PubMed

Park, Heon-Mook; Kim, Byoung-Ho; Yang, Il-Hyung; Baek, Seung-Hak

2012-12-01

This study aimed to compare the effects of conventional and orthodontic mini-implant (OMI) anchorage on tooth movement and arch-dimension changes in the maxillary dentition in Class II division 1 (CII div.1) patients. CII div.1 patients treated with extraction of the maxillary first and mandibular second premolars and sliding mechanics were allotted to conventional anchorage group (CA, n = 12) or OMI anchorage group (OA, n = 12). Pre- and post-treatment three-dimensional virtual maxillary models were superimposed using the best-fit method. Linear, angular, and arch-dimension variables were measured with software program. Mann-Whitney U-test and Wilcoxon signed-rank test were performed for statistical analysis. Compared to the CA group, the OMI group showed more backward movement of the maxillary central and lateral incisors and canine (MXCI, MXLI, MXC, respectively; 1.6 mm, p < 0.001; 0.9 mm, p < 0.05; 1.2 mm, p < 0.001); more intrusion of the MXCI and MXC (1.3 mm, 0.5 mm, all p < 0.01); less forward movement of the maxillary second premolar, first, and second molars (MXP2, MXM1, MXM2, respectively; all 1.0 mm, all p < 0.05); less contraction of the MXP2 and MXM1 (0.7 mm, p < 0.05; 0.9 mm, p < 0.001); less mesial-in rotation of the MXM1 and MXM2 (2.6°, 2.5°, all p < 0.05); and less decrease of the inter-MXP2, MXM1, and MXM2 widths (1.8 mm, 1.5 mm, 2.0 mm, all p < 0.05). In treatment of CII div.1 malocclusion, OA provided better anchorage and less arch-dimension change in the maxillary posterior teeth than CA during en-masse retraction of the maxillary anterior teeth.

The effectiveness of pendulum, K-loop, and distal jet distalization techniques in growing children and its effects on anchor unit: A comparative study.

PubMed

Marure, Pravinkumar S; Patil, Raju Umaji; Reddy, Sumitra; Prakash, Amit; Kshetrimayum, Nillachandra; Shukla, Rajeevkumar

2016-01-01

A common strategy to correct Class II malocclusions using a nonextraction protocol in children is to move the maxillary molars distally using molar distalization appliances, which usually derive their anchorage from maxillary premolars, causing mesialization of premolars and protrusion of incisors. To evaluate the skeletal, dental and soft tissue changes produced by three different distalizing appliances, namely, pendulum, K-loop, and distal jet appliances. Sixty-six children of mean age 14.13 years requiring molar distalization were divided into three groups: Group I (pendulum appliance), Group II (K-loop), and Group III (distal jet). Lateral cephalometric films were taken before and after 5 months of molar distalization and following cephalometric parameters were used to assess the effects of maxillary molar distalization, namely, anteroposterior skeletal (SNA/SNB/ANB), vertical skeletal (face height ratio/Frankfort-mandibular plane [FMA]/angle formed between Maxillary plane & Mandibular plane (MM)), interdental (overjet/overbite), maxillary dentoalveolar, and soft tissue parameters. There was no significant age difference between the three groups. In overall treatment changes among the three groups, the Anteroposterior skeletal changes were not statistically significant, vertically FMA angle increased by 1.79° ± 2.25° and overbite reduced by 2.38 ± 1.83 mm. The maxillary first molars were distalized by an average of 4.70 ± 3.01 mm (Upper 6 [U6] to pterygoid vertical [PTV]). The maxillary central incisor labial tipping increased to an average of 1.61 ± 2.73 mm and cant of upper lip increased by 3.40° ± 5.88° are statistically significant (P < 0.05). All three distalization techniques in growing children produced significant effects on anchor unit. There was an increase in FMA angle, significant bite opening, proclination of the maxillary incisors and increase in the cant of the upper lip.

Use of repeat anterior maxillary distraction to correct residual midface hypoplasia in cleft patients

PubMed Central

2017-01-01

Objectives The study was designed to evaluate the efficacy of performing a second, repeat anterior maxillary distraction (AMD) to treat residual cleft maxillary hypoplasia. Materials and Methods Five patients between the ages of 12 to 15 years with a history of AMD and with residual cleft maxillary hypoplasia were included in the study. Inclusion was irrespective of gender, type of cleft lip and palate, and the amount of advancement needed. Repeat AMD was executed in these patients 4 to 5 years after the primary AMD procedure to correct the cleft maxillary hypoplasia that had developed since the initial procedure. Orthopantomogram (OPG) and lateral cephalograms were taken for evaluation preoperatively, immediately after distraction, after consolidation, and one year postoperatively. The data obtained was tabulated and a Mann Whitney U-test was used for statistical comparisons. Results At the time of presentation, a residual maxillary hypoplasia was observed with a well maintained distraction gap on the OPG which ruled out the occurrence of a relapse. Favorable movement of the segments without any resistance was seen in all patients. Mean maxillary advancement of 10.56 mm was achieved at repeat AMD. Statistically significant increases in midfacial length, SNA angle, and nasion perpendicular to point A distance was achieved (P=0.012, P=0.011, and P=0.012, respectively). Good profile was achieved for all patients. Minimal transient complications, for example anterior open bite and bleeding episodes, were managed. Conclusion Addressing the problem of cleft maxillary hypoplasia at an early age (12–15 years) is beneficial for the child. Residual hypoplasia may develop in some patients, which may require additional corrective procedures. The results of our study show that AMD can be repeated when residual deformity develops with the previous procedure having no negative impact on the results of the repeat procedure. PMID:29333371

Extraction of maxillary first molars improves second and third molar inclinations in Class II Division 1 malocclusion.

PubMed

Livas, Christos; Halazonetis, Demetrios J; Booij, Johan Willem; Katsaros, Christos

2011-09-01

The aim of this study was to assess the changes in inclination of the maxillary second (M2) and third (M3) molars after orthodontic treatment of Class II Division 1 malocclusion with extraction of maxillary first molars. Two groups of subjects were studied. The experimental group consisted of 37 subjects, 18 boys and 19 girls (mean age, 13.2 ± 1.62 years). The inclusion criteria were white origin, Class II Division 1 malocclusion, overjet ≥4 mm, no missing teeth or agenesis, and maxillary M3 present. All patients were treated with extraction of the maxillary first molars and the Begg technique. Standardized lateral cephalometric radiographs were taken at the start of active treatment (T1) and at least 3.7 years posttreatment (T2). The control group was drawn from the archives of the Nittedal Growth Material (Oslo University, Oslo, Norway) and included 54 untreated Class I and Class II subjects,18 boys and 36 girls (mean age, 13.4 ± 1.99 years) followed up for a minimum of 3.6 years. M2 and M3 inclinations relative to the palatal plane (PP) and functional occlusal plane (FOP) were measured and compared between groups and time periods. M2 to PP inclination improved significantly in both the control group (M2-PP at T1, 17.7° ± 5.81°, and at T2, 11.9° ± 4.61°) and the experimental group (M2-PP at T1, 26.7° ± 5.75°, and at T2, 6.9° ± 6.76°). There were also significant increases of the mesial inclination of M3 in the control group (M3-PP at T1, 30.1° ± 8.54°, and at T2, 19.6° ± 9.01°) and extraction group (M3-PP at T1, 32.2° ± 7.90°, and at T2, 12.8° ± 7.36°). By using the FOP as the reference system, no significant change in the inclination of M2 was observed in the control group, whereas, in the extraction group, although more distally inclined at T1, M2 ended up mesially inclined at T2 (M2-FOP at T1, 14.2° ± 4.62°, and at T2, -6.2° ± 6.10°; P <0.0001). M3 inclinations were similar between the groups at T1 (M3-FOP control, 17.3° ± 9.35°; M3-FOP experimental, 19.6° ± 7.37°), and these improved significantly in both groups. However, M3 uprighting was almost 4 times greater in the extraction group (M3-FOP from T2-T1, 5.6° vs 19.9°). The greatest distal inclination of M3 at T2 in the extraction group was 9.4°, a value attained by only 43% of the control group. Extraction of the maxillary first molars in Class II Division 1 patients results in significant uprighting of M2 and M3 and facilitates the normal eruption of M3. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Maxillary sinus by-pass with tilted implants via tapered-screw bone expanders in low density bone: one year follow -up of a case series.

PubMed

Andreasi Bassi, M; Andrisani, C; Lopez, M A; Gaudio, R M; Lombardo, L; Lauritano, D

2016-01-01

In the present paper the use of tapered-screw bone expanders (TSBEs) is proposed, in combination with the placement of tilted implants in close proximity to the anterior sinus wall, solving the problem of the reduced height of the alveolar bone in the sub-antral area. The Authors named the procedure: Tilted Implant Expansion Osteotomy (TIEO). Fifteen patients (10 females and 5 males, mean age 47.8±8.15 years) with distal edentulous maxillae were enrolled in this study. For each edentulous site 2 implants were placed, the anterior implant in the area of the most anterior missing tooth while, the posterior implant, immediately in front of the maxillary sinus, with an inclined position. Adopting the aforesaid procedure, 34 cylindrical two-piece implants were placed, 17 of which were placed in tilted position, in order to by-pass the maxillary sinus. After a healing period of 4-6 months, the second stage surgery was performed. The cases were finalized by metal-ceramic cementable restorations with a variable number of elements, from 2 to 4, without any cantilever element. The post finalization follow-up was at 12 months. Survival rate was 100% since no fixtures were lost. At the one-year follow-up the clinical and radiological appearance of the soft and hard tissues was optimal and no pathological signs were recorded. TIEO is a promising surgical procedure for oral rehabilitation of maxillary edentulous sites and represents a therapeutic alternative to sinus lift techniques.

Apical root resorption comparison between Fränkel and eruption guidance appliances.

PubMed

Janson, Guilherme; Nakamura, Alexandre; de Freitas, Marcos Roberto; Henriques, José Fernando Castanha; Pinzan, Arnaldo

2007-06-01

The objectives of this study were to compare the amounts of apical root resorption that occur after treatment with 2 removable appliances-the Fränkel function regulator and the eruption guidance appliance (EGA)-in an untreated control group, and to determine the prevalence of root resorption in the maxillary and mandibular incisors and the dental arches. After treatment, periapical radiographs were obtained of the maxillary and mandibular incisors with the long-cone paralleling technique from 72 patients divided into 3 groups. Group 1 included 24 patients treated with the Fränkel appliance, group 2 consisted of 24 patients treated with the EGA, and group 3 comprised 24 untreated subjects. Some patients in groups 1 and 2 were also treated with fixed appliances. Subgroups of patients who had used exclusively 1 functional appliance were also formed and evaluated. Root resorption was scored according to the method of Levander and Malmgren. Results of the Kruskal-Wallis tests showed significantly greater resorption in the Fränkel group, the EGA group, and the EGA subgroup in relation to the control group. However, there were no statistically significant differences between the Fränkel and the EGA groups and the subgroups. The amounts of resorption were predominantly small and similar in the experimental groups and the subgroups. The prevalence of resorption for the incisors was greatest for the maxillary central, followed by the maxillary lateral, mandibular central, and mandibular lateral. It was concluded that the Fränkel group, the EGA group, and the EGA subgroup had significantly greater resorption than the control group. There was no difference in the amount of resorption between the Fränkel and the EGA groups.

[Three-dimensional finite element analysis of maxillary anterior teeth retraction force system in light wire technique].

PubMed

Zhang, Xiangfeng; Wang, Chao; Xia, Xi; Deng, Feng; Zhang, Yi

2015-06-01

This study aims to construct a three-dimensional finite element model of a maxillary anterior teeth retraction force system in light wire technique and to investigate the difference of hydrostatic pressure and initial displacement of upper anterior teeth under different torque values of tip back bend. A geometric three-dimensional model of the maxillary bone, including all the upper teeth, was achieved via CT scan. To construct the force model system, lingual brackets and wire were constructed by using the Solidworks. Brackets software, and wire were assembled to the teeth. ANASYS was used to calculate the hydrostatic pressure and the initial displacement of maxillary anterior teeth under different tip-back bend moments of 15, 30, 45, 60, and 75 Nmm when the class II elastic force was 0.556 N. Hydrostatic pressure was concentrated in the root apices and cervical margin of upper anterior teeth. Distal tipping and relative intrusive displacement were observed. The hydrostatic pressure and initial displacement of upper canine were greater than in the central and lateral incisors. This hydrostatic pressure and initial intrusive displacement increased with an increase in tip-back bend moment. Lingual retraction force system of maxillary anterior teeth in light wire technique can be applied safely and controllably. The type and quantity of teeth movement can be controlled by the alteration of tip-back bend moment.

[Comparing the anchorage effects of micro-implant and J hook on treating patients with maxillary protrusion].

PubMed

Wu, Xin; Liu, Guo-yuan; Jiang, Yong-lian

2015-10-01

To investigate the differences in anchorage effects between micro-implants and J hook in treating patients with Class II division 1 maxillary protrusion. Thirty-one cases of adult patients with Class II division 1 maxillary protrusion were treated. They were divided into 2 groups depending on their selection. The first group included 17 patients for micro-implant anchorage, who adopted micro-implant and sliding mechanism to close maxillary extraction space and depress the mandibular molar. The second group encompassed 14 cases for J hook, who adopted sliding mechanism, J hooks in high traction and Class II intermaxillary traction to close extraction space. X-ray lateral cephalometric radiographs were measured before and after treatment, and SPSS16.0 software package was employed to compare the differences in soft and hard tissue changes before and after treatment between 2 groups. There were statistically significant differences in SNB, ANB, MP-FH, U1-Y, U6-Y, L6-MP, NLA, and UL-Y between the 2 groups before and after treatment, while there was no significant difference in SNA, U1-SN, U1-X, and U6-X between the 2 groups. In treating patients with Class II division 1 maxillary protrusion, micro-implant has stronger anchorage effects than J hook, while at the same time depressing the mandibular molars, and making it more favorable to improve Class II faces.

Transantral distraction devices in correction of severe maxillary deformity in cleft patients.

PubMed

Shokirov, Shokhruh; Wangerin, Konrad

2011-01-01

Maxillary advancement by Le Fort I osteotomy in cleft patients has an average relapse of about 40-60 percent. With extraoral distraction devices it is possible to obtain an almost unlimited advancement of the upper jaw. Due to the social problems the retention period is normally reduced to some monthes. A relapse of 10-25 % can be seen in these cases. Le Fort I internal distraction osteogenesis offers an alternative to one-step orthognathic advancement, with advantages of gradual lengthening through scar and earlier treatment in growing patients. The objective of this study was to present our experience in the treatment of maxillary deficiency in cleft patients using transantral internal distraction devices. The distraction procedure was successfully accomplished in seventeen patients. For all the seventeen patients maxillary distraction device designed by Konrad Wangerin was used. The distraction distances were 8 to 24 mm. Preoperative, postoperative, and follow-up (12 and 24 months) lateral cephalogram measurements were compared including angular and linear changes. A good new bone was found that was formed in distraction pitch between lines of osteotomy. After distraction of median facial zone, occlusion and profile of soft tissues were considerably improved. All patients after postoperative time required final orthodontic treatment and their final occlusal relationships were satisfactory. The transantral distraction device is a new option for the treatment of severe maxillary hypoplasia in cleft patients.

Midfacial Changes Through Anterior Maxillary Distraction Osteogenesis in Patients With Cleft Lip and Palate.

PubMed

Kanzaki, Hiroyuki; Imai, Yoshimichi; Nakajo, Tetsu; Daimaruya, Takayoshi; Sato, Akimitsu; Tachi, Masahiro; Nunomura, Youhei; Itagaki, Yusuke; Nishimura, Kazuaki; Kochi, Shoko; Igarashi, Kaoru

2017-06-01

Maxillary hypoplasia is a major issue in cleft lip and palate patients, and predictable surgical maxillary advancement is required. In the present study, the changes and stability of the maxilla and soft tissue profile achieved after the application of anterior maxillary distraction osteogenesis (AMDO) using intraoral expander in unilateral cleft lip and palate and isolated cleft palate patients were investigated by comparing to the Le Fort I osteotomy (LFI) and maxillary distraction osteogenesis (DO) with rigid external distraction (RED) system.Ten patients who underwent orthognathic treatment with AMDO were examined (AMDO group). Changes in the positions of soft and hard tissue landmarks were calculated from the lateral cephalograms taken before the distraction, at the end of the distraction, and 1 year after the surgery. They were compared with the changes in 7 other unilateral cleft lip and palate patients who underwent LFI (LFI group) and 6 others who underwent DO with RED (RED group).The mean maxillary advancement of the AMDO group was similar to that of the RED group, judged by the change of point A. During DO, the AMDO group showed less clockwise rotation of mandible compared to the RED group. The soft tissue advancement of the upper lip and nose in the AMDO group was similar to that in the RED group, which was significantly larger than that in the LFI group.Our results indicate that AMDO can be surgical option to cleft lip and palate patients with less invasive but excellent improvement in both midfacial skeletal and soft tissue similar to DO-RED.

The Use of a Novel Approach for the Instrumentation of a Cone-beam Computed Tomography-discernible Lateral Canal in an Unusual Maxillary Incisor: Case Report.

PubMed

Chaniotis, Antonis; Filippatos, Christos G

2017-06-01

Lateral and apical ramifications of the main root canal create potential pathways through which bacteria can spread and remain unaffected by treatment procedures. It is a challenge for the specialty to find techniques that can predictably reach, disinfect, and obturate these ramifications. Here, we report the use of a novel instrumentation approach to aid in the negotiation and management of a lateral canal discernible on cone-beam computed tomography (CBCT) in an unusual maxillary central incisor. A 23-year-old female patient was referred for evaluation and possible treatment of tooth 9. The periapical radiographic examination revealed pulp chamber obliteration, existence of a lateral lesion, and a possible complex internal root canal anatomy. The CBCT evaluation revealed the existence of a lateral lesion, a periapical lesion, an additional distopalatal canal, and a lateral canal exiting at the lateral lesion. The diagnosis of asymptomatic apical and lateral periodontitis of tooth 9 was reached. CBCT-aided access cavity preparation and scouting resulted in the successful negotiation of all canals, main and lateral. A novel instrumentation technique with precurved controlled memory files was used for the mechanical preparation of the lateral canal to a 25/04 enlargement. Obturaton of the lateral canal was achieved with a single gutta-percha cone and AH Plus Root Canal Sealer. At the 2-year follow-up, the patient was asymptomatic, and the 2-dimensional radiographic examinations revealed resolution of both the periapical and the lateral lesions. This case report describes the application of a novel instrumentation technique for the mechanical debridement of an infected lateral canal discernible on CBCT and reinforces the importance of treating the root canals as systems that possesses anatomic intricacies that need to be addressed. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Rehabilitative treatment of cleft lip and palate: experience of the Hospital for Rehabilitation of Craniofacial Anomalies - USP (HRAC-USP) - Part 2: Pediatric Dentistry and Orthodontics

PubMed Central

FREITAS, José Alberto de Souza; GARIB, Daniela Gamba; OLIVEIRA, Thais Marchini; LAURIS, Rita de Cássia Moura Carvalho; de ALMEIDA, Ana Lúcia Pompéia Fraga; NEVES, Lucimara Teixeira; TRINDADE-SUEDAM, Ivy Kiemle; YAEDÚ, Renato Yassutaka Faria; SOARES, Simone; PINTO, João Henrique Nogueira

2012-01-01

The aim of this article is to present the pediatric dentistry and orthodontic treatment protocol of rehabilitation of cleft lip and palate patients performed at the Hospital for Rehabilitation of Craniofacial Anomalies - University of São Paulo (HRAC-USP). Pediatric dentistry provides oral health information and should be able to follow the child with cleft lip and palate since the first months of life until establishment of the mixed dentition, craniofacial growth and dentition development. Orthodontic intervention starts in the mixed dentition, at 8-9 years of age, for preparing the maxillary arch for secondary bone graft procedure (SBGP). At this stage, rapid maxillary expansion is performed and a fixed palatal retainer is delivered before SBGP. When the permanent dentition is completed, comprehensive orthodontic treatment is initiated aiming tooth alignment and space closure. Maxillary permanent canines are commonly moved mesially in order to substitute absent maxillary lateral incisors. Patients with complete cleft lip and palate and poor midface growth will require orthognatic surgery for reaching adequate anteroposterior interarch relationship and good facial esthetics. PMID:22666849

Alteration of maxillary and mandibular growth of adult patients with unoperated isolated cleft palate.

PubMed

Yang, Yunqiang; Wu, Yeke; Gu, Yifei; Yang, Qijian; Shi, Bing; Zheng, Qian; Wang, Yan

2013-07-01

The objective of this study was to investigate the effects of cleft palate itself on the growth of maxilla and mandible. Fifty-two adult female patients with unoperated isolated cleft palate and 52 adult female individuals with normal occlusion were included in our study. Computer software was used for lateral cephalometry measurement. Manual measurement was performed for dental cast measurements, and sample t test analysis was applied to analyze the differences between the 2 groups using SPSS 17.0. The sella-nasion-subspinale point angle, subspinale-nasion-supramentale point angle, and maxillary arch length of the cleft group were significantly smaller than those of the control group (P < 0.01). Both maxillary and mandibular posterior dental arch widths of the cleft group were significantly larger compared with the control group (P < 0.01), whereas the sella-nasion-supramentale point angle, mandible arch length, palate height, and palate shelf inclination did not differ between the 2 groups. The measurements did not differ between the submucosal cleft and the overt cleft patients. Cleft palate itself has adverse effects on the maxilla growth with shorter maxillary arch length and wider posterior dental arch width.

Anchorage onto deciduous teeth: effectiveness of early rapid maxillary expansion in increasing dental arch dimension and improving anterior crowding.

PubMed

Mutinelli, Sabrina; Manfredi, Mario; Guiducci, Antonio; Denotti, Gloria; Cozzani, Mauro

2015-01-01

Anchorage onto permanent dentition is a common procedure in rapid maxillary expansion. However, replacing first permanent molars with the second deciduous molars seems to be an option to reduce some negative side effects during orthodontic treatment. The purpose of this study was to evaluate the dental effect of rapid maxillary expansion with anchorage exclusively onto deciduous teeth performed in the first period of transition. Twenty patients with a lateral cross-bite treated exclusively by a Haas expander in early mixed dentition were retrospectively analyzed before treatment, at appliance removal, and at 21 months out of retention. The sagittal and transverse dimensions, together with the inter-canine arch and irregularity index, were digitally measured on scanned images of dental casts. The patients were compared with three balanced control groups (in total, 60 individuals) matched for gender. Two control groups had the same canine dental class as the treated group at T1, were in the inter-transitional period, and either had or lacked a lateral cross-bite. The last control group was comprised of adolescents in permanent dentition with a dental class I. The statistical analysis was performed by means of repeated-measures ANOVA for paired data and one-way ANOVA, the Kruskal-Wallis test, and the Mann-Whitney test for independent measures (α-level p < 0.05). At the end of follow-up (inter-transitional period of dentition), the dental arch dimensions of treated patients were similar to those of adolescents with a dental class I and significantly wider than those of patients with a lateral cross-bite. Also, the anterior irregularity index was lower among patients who had undergone expansion treatments than in all untreated study participants. The Haas expander anchored to the deciduous teeth is effective in increasing the dental arch width in patients with a lateral cross-bite. The dimensions of the dental arch were modified earlier toward the values of the permanent dentition.

Recovery of multiple impacted maxillary teeth in a hyperdivergent Class I patient using Temporary Skeletal Anchorage Devices and augmented corticotomy.

PubMed

Kim, Kyung A; Hwang, Hyeon-Shik; Chung, Kyu-Rhim; Kim, Seong-Hun; Nelson, Gerald

2018-01-01

Treatment of multiple impacted teeth is challenging. Three-dimensional treatment planning can help in delivering a better outcome. This case report presents a patient with an incomplete dental transposition between the canine and lateral incisor of the maxillary right side associated with the impaction of a dilacerated right central incisor. Using a two-stage surgical exposure and augmented corticotomy, the patient's occlusion and smile esthetics were significantly improved, and Class I occlusal relationships with optimal overjet and overbite were achieved after 50 months of orthodontic treatment. Thirty-month posttreatment records revealed a stable result.

Root resorption during orthodontic treatment with self-ligating or conventional brackets: a systematic review and meta-analysis.

PubMed

Yi, Jianru; Li, Meile; Li, Yu; Li, Xiaobing; Zhao, Zhihe

2016-11-21

The aim of this study was to compare the external apical root resorption (EARR) in patients receiving fixed orthodontic treatment with self-ligating or conventional brackets. Studies comparing the EARR between orthodontic patients using self-ligating or conventional brackets were identified through electronic search in databases including CENTRAL, PubMed, EMBASE, China National Knowledge Infrastructure (CNKI) and SIGLE, and manual search in relevant journals and reference lists of the included studies until Apr 2016. The extraction of data and risk of bias evaluation were conducted by two investigators independently. The original outcome underwent statistical pooling by using Review Manager 5. Seven studies were included in the systematic review, out of which, five studies were statistically pooled in meta-analysis. The value of EARR of maxillary central incisors in the self-ligating bracket group was significantly lower than that in the conventional bracket group (SMD -0.31; 95% CI: -0.60--0.01). No significant differences in other incisors were observed between self-ligating and conventional brackets. Current evidences suggest self-ligating brackets do not outperform conventional brackets in reducing the EARR in maxillary lateral incisors, mandible central incisors and mandible lateral incisors. However, self-ligating brackets appear to have an advantage in protecting maxillary central incisor from EARR, which still needs to be confirmed by more high-quality studies.

Postretention stability after orthodontic closure of maxillary interincisor diastemas

PubMed Central

de MORAIS, Juliana Fernandes; de FREITAS, Marcos Roberto; de FREITAS, Karina Maria Salvatore; JANSON, Guilherme; CASTELLO BRANCO, Nuria

2014-01-01

Anterior spaces may interfere with smile attractiveness and compromise dentofacial harmony. They are among the most frequent reasons why patients seek orthodontic treatment. However, midline diastema is commonly cited as a malocclusion with high relapse incidence by orthodontists. Objectives This study aimed to evaluate the stability of maxillary interincisor diastemas closure and the association of their relapse and interincisor width, overjet, overbite and root parallelism. Material and Methods Sample comprised 30 patients with at least a pretreatment midline diastema of 0.5 mm or greater after eruption of the maxillary permanent canines. Dental casts and panoramic radiographs were taken at pretreatment, posttreatment and postretention. Results Before treatment, midline diastema width was 1.52 mm (SD=0.88) and right and left lateral diastema widths were 0.55 mm (SD=0.56) and 0.57 mm (SD=0.53), respectively. According to repeated measures analysis of variance, only midline diastema demonstrated significant relapse. In the overall sample the average relapse of midline diastema was 0.49 mm (SD=0.66), whilst the unstable patients showed a mean space reopening of 0.78 mm (SD=0.66). Diastema closure in the area between central and lateral incisors showed great stability. Multivariate correlation tests showed that only initial diastema width (β=0.60) and relapse of overjet (β=0.39) presented association with relapse of midline diastema. Conclusions Midline diastema relapse was statistically significant and occurred in 60% of the sample, while lateral diastemas closure remained stable after treatment. Only initial diastema width and overjet relapse showed association with relapse of midline diastema. There was no association between relapse of interincisor diastema and root parallelism. PMID:24918661

Micro-Computed Tomography Analysis of the Root Canal Morphology of Palatal Roots of Maxillary First Molars.

PubMed

Marceliano-Alves, Marília; Alves, Flávio Rodrigues Ferreira; Mendes, Daniel de Melo; Provenzano, José Claudio

2016-02-01

A thorough knowledge of root canal anatomy is critical for successful root canal treatments. This study evaluated the internal anatomy of the palatal roots of maxillary first molars with micro-computed tomography (microCT). The palatal roots of extracted maxillary first molars (n = 169) were scanned with microCT to determine several anatomic parameters, including main canal classification, lateral canal occurrence and location, degree of curvature, main foramen position, apical constriction presence, diameters 1 and 2 mm from the apex and 1 mm from the foramen, minor dentin thickness in those regions, canal volume, surface area, and convexity. All canals were classified as Vertucci type I. The cross sections were oval in 61% of the canals. Lateral canals were found in 25% of the samples. The main foramen did not coincide with the root apex in 95% of the cases. Only 8% of the canals were classified as straight. Apical constriction was identified in 38% of the roots. The minor and major canal diameters and minor dentin thickness were decreased near the apex. The minor dentin thickness 1 mm from the foramen was 0.82 mm. The palatal canals exhibited a volume of 6.91 mm(3) and surface area of 55.31 mm(2) and were rod-shaped. The root canals of the palatal roots were classified as type I. However, some factors need to be considered during the treatment of these roots, including the frequent ocurrence of moderate/severe curvatures, oval-shaped cross-sections, and lateral canals, noncoincidence of the apical foramen with the root apex, and absence of apical constriction in most cases. Copyright © 2016 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

[Nonsurgical endodontic treatment of an invaginated canine].

PubMed

Fernández Guerrero, F; Miñana Laliga, R; Bullon Fernandez, P

1989-01-01

We present a case of a maxillary canine with a dens invaginatus treated successfully. The patient had pain, swelling and a sinus tract coming from the inmature apex of the canine. The canals were enlarged and cleaned and the main canal was filled with Calcium Hydroxide to allow the root development. Seven months later, the patient was asymptomatic and the tooth was obturated with guttapercha. One year later it was confirm the success in the treatment.

Early functional, esthetic, and psychological rehabilitation of preschool child with nonsyndromic oligodontia and anodontia in mixed dentition stage through conservative systematic approach: A case report with 5-year follow-up.

PubMed

Rathee, Manu; Malik, Poonam; Dua, Madhuri; Yadav, Vikas

2016-01-01

Missing teeth are a common developmental abnormality in humans. It may manifest as absence of varying numbers of primary and/or secondary teeth. Early treatment and follow-up are the key to successful rehabilitation of young patients with congenitally missing teeth. It is critical that oral rehabilitation is started early to maintain and correct the oral functions. Mucosa borne removable prostheses are the commonly selected treatment options for the young patients who present with oligodontia or anodontia. This clinical report describes esthetic, functional, and psychological rehabilitation of a young boy with severe oligodontia in maxillary arch and anodontia in mandibular arch. The individualized conservative graded approach in prosthetic rehabilitation with removable acrylic prosthesis helped to achieve esthetics, functionality, and psychological benefits.

Autotransplantation of a maxillary third molar to replace a maxillary premolar with vertical root fracture.

PubMed

Tsurumachi, T; Kakehashi, Y

2007-12-01

To report the successful autotransplantation of a fully developed third molar that required nonsurgical and surgical interventions for tooth adaptation. This case report describes the autotransplantation of a third molar with complete root development after the loss of a fractured premolar in a 47-year-old male. To allow better adaptation of the donor tooth, the buccal roots of the third molar were removed using a diamond bur and the canal entrances were filled. Recall examination 6 years after completion of root-canal treatment showed normal periodontal healing with absence of infection, ankylosis or progressive resorption. The transplantation of a third molar is seen as a promising method to replace a lost permanent tooth, and to restore aesthetics and function. *Autotransplantation is a viable option for the treatment of a missing tooth or for replacement of traumatized tooth when there is a donor tooth available. *Fully developed third molars are potentially reliable candidates in the absence of other suitable donor teeth.

Professional and lay people perceptions of anterior maxillary esthetics

NASA Astrophysics Data System (ADS)

Roslan, Husniyati; Lillywhite, Graeme

2016-12-01

Achieving esthetic outcomes with implant-based restorations in the esthetic zone is a challenge due to the difficulty in replacing lost papillae. This study aimed to assess the influence of contact point position on the overall perception of esthetics as assessed by dental professionals and lay people. A cross-sectional study using self-administered questionnaire was distributed among 300 prosthodontists, general dentists and lay people in the United Kingdom. The questionnaire consisted of photographic images of a smile, intentionally altered using image manipulation software. Variations in contact length between maxillary central incisors were created to mimic the clinical situation when missing teeth were replaced with implant-supported crowns. These images were rated using VAS. One-way and two-way ANOVAs, and Tukey's test were used to analyze the data. The overall response rate by the three groups was 72%. Lay people and general dentists were more critical than prosthodontists in all VAS ratings (p < 0.000). Overall, all the groups perceived that the esthetic value reduced as the contact point increased in its length.

Factors affecting dental biofilm in patients wearing fixed orthodontic appliances.

PubMed

Mei, Li; Chieng, Joyce; Wong, Connie; Benic, Gareth; Farella, Mauro

2017-12-01

The aim of this study is to investigate the amount and the distribution of biofilm in patients wearing fixed appliances and its relation with age, gender, frequency of tooth brushing, and patient motivation. The sample comprised 52 patients (15.5 ± 3.6 years old, 30 females and 22 males) wearing fixed orthodontic appliances. Dental biofilm was assessed using a modified plaque index (PI). A questionnaire was used to collect patient's information, including gender, age, treatment motivation, and frequency of tooth brushing. Gingival (PI score = 0.9 ± 0.7), mesial (0.8 ± 0.6), and distal (0.8 ± 0.5) areas accumulated more biofilm than occlusal areas (0.3 ± 0.3) (P < 0.038). The maxillary lateral incisors (1.1 ± 0.8) and maxillary canines (1.0 ± 0.8) had more biofilm than other teeth (P < 0.05). The maxillary arch (0.8 ± 0.7) had significantly more biofilm than mandibular arch (0.6 ± 0.6) (P = 0.042). No significant difference was found between the right side (0.7 ± 0.7) and left side (0.7 ± 0.6) (P = 0.627). Less biofilm was found in females (0.6 ± 0.5), adults (0.3 ± 0.3), and "self-motivated" patients (0.3 ± 0.3), compared with males (0.9 ± 0.5), children (0.8 ± 0.6), and "family-motivated" patients (1.1 ± 0.5) (P < 0.001). The amount of biofilm was associated with self-report of the frequency of daily tooth brushing (P < 0.001). Patients wearing fixed orthodontic appliances have the highest biofilm accumulation on the maxillary lateral incisors and maxillary canines, particularly in the gingival area and areas behind arch wires. Less biofilm was observed in female and adult patients and in those who were self-motivated and brushed their teeth more often.

Simulation of automatic precision departures and missed approaches using the microwave landing system

NASA Technical Reports Server (NTRS)

Feather, J. B.

1987-01-01

Results of simulated precision departures and missed approaches using MLS guidance concepts are presented. The study was conducted under the Terminal Configured Vehicle (TCV) Program, and is an extension of previous work by DAC under the Advanced Transport Operating System (ATOPS) Technology Studies Program. The study model included simulation of an MD-80 aircraft, an autopilot, and a MLS guidance computer that provided lateral and vertical steering commands. Precision departures were evaluated using a noise abatement procedure. Several curved path departures were simulated with MLS noise and under various environmental conditions. Missed approaches were considered for the same runway, where lateral MLS guidance maintained the aircraft along the extended runway centerline. In both the departures and the missed approach cases, pitch autopilot takeoff and go-around modes of operation were used in conjunction with MLS lateral guidance.

A preliminary study for determination of three-dimensional root apex position of the maxillary teeth using camera calibration technology

PubMed Central

Oh, Hyun Jun; Yang, Il-Hyung

2016-01-01

Objectives: To propose a novel method for determining the three-dimensional (3D) root apex position of maxillary teeth using a two-dimensional (2D) panoramic radiograph image and a 3D virtual maxillary cast model. Methods: The subjects were 10 adult orthodontic patients treated with non-extraction. The multiple camera matrices were used to define transformative relationships between tooth images of the 2D panoramic radiographs and the 3D virtual maxillary cast models. After construction of the root apex-specific projective (RASP) models, overdetermined equations were used to calculate the 3D root apex position with a direct linear transformation algorithm and the known 2D co-ordinates of the root apex in the panoramic radiograph. For verification of the estimated 3D root apex position, the RASP and 3D-CT models were superimposed using a best-fit method. Then, the values of estimation error (EE; mean, standard deviation, minimum error and maximum error) between the two models were calculated. Results: The intraclass correlation coefficient values exhibited good reliability for the landmark identification. The mean EE of all root apices of maxillary teeth was 1.88 mm. The EE values, in descending order, were as follows: canine, 2.30 mm; first premolar, 1.93 mm; second premolar, 1.91 mm; first molar, 1.83 mm; second molar, 1.82 mm; lateral incisor, 1.80 mm; and central incisor, 1.53 mm. Conclusions: Camera calibration technology allows reliable determination of the 3D root apex position of maxillary teeth without the need for 3D-CT scan or tooth templates. PMID:26317151

Radiological and clinical difficulties in the management of chronic maxillary sinusitis in β Thalassemic paediatric patients.

PubMed

Di Mauro, R; Greco, L; Melis, M; Manenti, G; Floris, R; Giacomini, P G; Di Girolamo, M; Di Girolamo, S

2016-05-01

Beta thalassemia is a blood dyscrasia that caused a marked expansion of active marrow spaces and extramedullary haematopoiesis results. In these patients various alterations and abnormalities affects different body areas, including increased risk of sinusitis. The marrow expansion in the facial bones results in delay in pneumatisation of the sinuses, overgrowth of the maxillae, and forward displacement of the upper incisors with skeletal deformities. In current literature, maxillary sinuses are not deeply evaluated by CT scan studies in these kind of patients. The aim of our study was to investigate the presence of maxillary sinuses abnormalities by the use of CT in patients with beta-thalassemia major and to compare these findings with a control group free from this disease. A retrospective analysis of 22 paediatric patients with beta-thalassemia major and 22 control subjects without sinonasal diseases was performed. CT was done using a 64-multidetector-row CT scanner without contrast injection, obtained in axial plane using thin-slice technique. Evaluated parameters were: bone thickness of the lateral and anterior wall, density and volume of the maxillary sinuses. Significant difference was found between the study group and control group in the evaluation of all the parameters examined. The maxillary sinus of β thalassemic patients was smaller respect of controls, the bone was more dense and thick in the side and anterior wall. Beta-thalassemic patients have a relative risk of 2.87 to develop a maxillary sinusitis. In these patients there is an increased incidence of sinonasal infections due to the abnormal development of cranio facial skeleton. These bone alterations might confuse the physicians and lead to an increased rate of sinusitis diagnoses. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Apical root resorption in maxillary incisors when employing micro-implant and J-hook headgear anchorage: a 4-month radiographic study.

PubMed

Wang, Qingzhu; Chen, Wenjing; Smales, Roger J; Peng, Hui; Hu, Xiaokun; Yin, Lu

2012-10-01

This study evaluated, over a 4-month study period, the amount of apical root resorption occurring in maxillary central incisors following their retraction when employing either micro-implant or J-hook headgear anchorage. The prospective randomised clinical trial was conducted in Orthodontic Clinic, College of Stomatology, China from 2008-2009. Subjects are patients requiring fixed appliances on waiting list (n=20). In female Han Chinese patients aged from 16-26 years, standardized periapical radiographs from 10 randomly assigned patients with maxillary protrusions comprising the micro-implant group, and from 10 similar patients comprising the J-hook headgear group, were assessed for maxillary central incisor apical root resorption. Measurements before and after orthodontic therapy were also obtained from lateral cephalometric radiographs to calculate incisor horizontal retraction and vertical intrusion distances. Estimated retraction force vectors were calculated in horizontal and vertical directions for both treatment groups. Data analysis employed t-tests and the Pearson correlation test, with α=0.05 for statistical significance. The results showed that when compared with the J-hook group, significantly more apical root resorption shortening of the maxillary central incisors was observed in the micro-implant group (1.27 mm difference, 95% CI=0.70-1.84, P<0.001), which was associated with a significantly larger retraction distance (P=0.004) and a smaller vertical force component (P<0.0001). We are led to conclude that continuous activation of the nickel-titanium coil springs used in the micro-implant group resulted in significantly more apical root resorption shortening and maxillary central incisor retraction than when intermittent J-hook retraction was employed. The employment of continuous duration orthodontic forces presents a risk for increased apical root resorption that requires careful radiographic monitoring.

The Effect of Using Self-ligating Brackets on Maxillary Canine Retraction: A Split-mouth Design Randomized Controlled Trial.

PubMed

Hassan, Siba E; Hajeer, Mohammad Y; Alali, Osama H; Kaddah, Ayham S

2016-06-01

The results of previous studies about the efficacy of using self-ligating brackets (SLBs) in controlling canine movement during retraction are not in harmony. Therefore, the current study aimed to compare the effects of using new passive SLBs on maxillary canine retraction with sliding mechanics vs conventional ligating brackets (CLBs) tied with metal ligatures. The sample comprised 15 adult patients (4 males, 11 females; 18-24 years) requiring bilateral extraction of maxillary first premolars. Units of randomization are the left or right maxillary canines within the same patient. The two maxillary canines in each patient were randomly assigned to one of the two groups in a simple split-mouth design. The canines in the SLBs group (n = 15) were bracketed with SLBs (Damon Q™), while the canines in the CLBs group (n = 15) were bracketed with conventional brackets (Mini Master Series). Transpalatal bars were used for anchorage. After leveling and alignment, 0.019 × 0.025" stainless steel working archwires were placed. Canines were retracted using a nickel-titanium close-coil springs with a 150 gm force. The amount and rate of maxillary canine retraction, canine rotation, and loss of anchorage were measured on study models collected at the beginning of canine retraction (T0) and 12 weeks later (T1). Differences were analyzed using paired-samples t-tests. The effect differences were statistically significant (p < 0.001). Using Damon Q™ SLBs, the amount and rate of canine retraction were greater, while canine rotation and anchorage loss were less. From a clinical perspective, extraction space closure can be accomplished more effectively using SLBs. Self-ligating brackets gave better results compared to the CLBs in terms of rate of movement, amount of canine rotation following extraction, and anchorage loss.

Fetal and neo-natal maxillary ontogeny in extant humans and the utility of prenatal maxillary morphology in predicting ancestral affiliation

PubMed Central

Nicholas, Christina L.

2016-01-01

Objectives The midface of extant H. sapiens is known to undergo shape changes through fetal and neo-natal ontogeny; however, little work has been done to quantify these shape changes. Further, while midfacial traits which vary in frequency between populations of extant humans are presumed to develop prenatally, patterns of population-specific variation maxillary shape across ontogeny are not well documented. Only one study of fetal ontogeny which included specific discussion of the midface has taken a 3D geometric morphometric approach, and that study was limited to one population (Japanese). The present research project seeks to augment our understanding of fetal maxillary growth patterns, most especially in terms of intraspecific variation. Materials and Methods Three-dimensional coordinate landmark data were collected on the right maxillae of 102 fetal and neo-natal individuals from three groups (Euro-American, African-American, “Mixed Ancestry”). Results Shape changes were seen mainly in the lateral wall of the piriform aperture, the anterior nasal spine, and the subnasal alveolar region. The greatest difference across age groups (2nd Trimester, 3rd Trimester, Neonates) was between the second and third trimester. Euro-Americans and African-Americans clustered by population and differences in midfacial morphology related to ancestry could be discerned as early as the second trimester (p=0.002), indicating that population variation in maxillary morphology appears very early in ontogeny. Discussion The midface is a critical region of the skull for assessing ancestry and these results indicate that maxillary morphology may be useful for estimating ancestry for prenatal individuals as young as the second trimester. PMID:27412693

Morphometric analysis of developing crowns of maxillary primary second molars and permanent first molars in humans.

PubMed

Peretz, B; Nevis, N; Smith, P

1998-07-01

The purpose of this study was firstly to characterize the changes occurring in size and form of the mineralizing maxillary second primary molar and first permanent molar crowns, and secondly to determine if similar changes in size and form characterize enamel apposition in the crowns of these teeth. Twenty-five primary second molars and 20 maxillary permanent first molars at various stages of development, found in archaeological excavations in Israel, were examined for a number of measured variables using image analyser software. Teeth were divided into two groups according to their stage of development: stage I included all teeth at an early stage of development in which mesiobuccal-cusp height was less than 5 mm for the primary molar and 5.9 mm for the permanent molar; stage 2 included all teeth in later stages of development where mesiobuccal-cusp height was greater than these values. In the primary molar, a significant increase was found between the two stages in almost all variables. Significant correlations were also found between all intercusp distances and the external variables. Strong correlations between height of the mesiobuccal cusp and all external and internal variables were noted in stage 1, but fewer in stage 2. In the permanent tooth, no increase was observed in intercusp distances and very few correlations were found between and among the variables. The results suggest that a change in the shape of the maxillary primary second molar occurs during formation, with the lingual cusp tips moving lingually and distally, and the distobuccal cusp tips moving distally. No change occurs in the shape of the maxillary permanent first molar during crown formation. Growth of the maxillary primary second and permanent first molar crowns occurs in 'bursts' of development.

A simple mechanism for measuring and adjusting distraction forces during maxillary advancement.

PubMed

Suzuki, Eduardo Yugo; Suzuki, Boonsiva

2009-10-01

Direct measurement of distraction forces on the craniofacial skeleton has never been reported. The present report describes the development of a method of assessing and adjusting traction forces applied through maxillary distraction osteogenesis. A simple mechanism to measure and adjust tension force during maxillary distraction osteogenesis was developed and connected bilaterally to the traction screws of a rigid external distraction device. Measurements were carried out before and after activation using a Shimpo (Nidec-Shimpo America Corporation, Itasca, IL) force gauge in 4 patients (2 with unilateral cleft lip and/or palate, 1 with bilateral cleft lip and palate, and 1 with noncleft) during the distraction process. Activation was performed twice a day at a rate of 1 mm/day. The average maximum force applied throughout the distraction period was 42.5 N (range 16.4 to 65.3 N), with increments, after activation, averaging 10.5 N (range 7.9 to 15.7 N). In patients with unilateral cleft lip and/or palate, distraction forces on the larger segment were 65.1% higher than on the lesser segment. A differential pattern of forces was also observed in the patients with asymmetric noncleft. However, the differential forces between lateral segments were not observed in the patient with bilateral cleft lip and palate. During the activation period, distraction forces progressively increased, whereas the amount of maxillary movement decreased. Pain and discomfort were reported with high forces. Through this mechanism, direct measurement and adjustment of distraction forces during maxillary advancement was possible. The unbalanced pattern of forces observed in patients with cleft suggests the necessity of individual adjustments for controlling pain and clinical symptoms. Accordingly, assessment of distraction forces during maxillary distraction osteogenesis is extremely helpful in understanding the biomechanics of the distraction process.

Skeletal and dental stability after maxillary distraction with a rigid external device in adult cleft lip and palate patients.

PubMed

Aksu, Muge; Saglam-Aydinatay, Banu; Akcan, Cenk Ahmet; El, Hakan; Taner, Tulin; Kocadereli, Ilken; Tuncbilek, Gokhan; Mavili, Mehmet Emin

2010-02-01

To evaluate skeletal and dental stability in adult cleft lip and palate patients treated with a rigid external distraction system at the end of distraction and during the postdistraction period. Lateral cephalograms of 7 patients were obtained before distraction, at the end of distraction, and during the postdistraction period. The mean age before distraction was 21.56 +/- 4.73 years. The mean follow-up was 37.3 +/- 12.4 months. The assessment of findings showed that skeletal maxillary sagittal movement was achieved in a superoanterior direction. The maxillary depth angle and effective maxillary length increased significantly (2 degrees and 9 mm, respectively) after distraction, whereas the palatal plane angle increased by 8 degrees , resulting in an anterior movement of the maxilla with a counterclockwise rotation. The lower facial height showed no significant changes after distraction. The sagittal movement of the upper incisors and the angulation of the upper first molars increased significantly (4.5 mm and 5.5 degrees , respectively). During the postdistraction period, the maxilla showed a slight relapse (22%). The effective maxillary length decreased by 2 mm. The palatal plane angle almost returned to its original position, showing 7 degrees of clockwise rotation. The lower facial height remained stable. The upper incisors moved anteriorly and the upper first molars showed a significant mesioangular change during follow-up. After distraction, significant maxillary advancement was achieved with a counterclockwise rotation. The upper incisors moved labially, and the upper first molars angulated mesially. After 3 years, a 22% relapse rate was seen in the maxilla. The counterclockwise rotation of the maxilla was returned to its original position. The upper incisors moved more anteriorly. Copyright 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Effects of zygoma-gear appliance for unilateral maxillary molar distalization: A prospective clinical study.

PubMed

Kilkis, Dogan; Celikoglu, Mevlut; Nur, Metin; Bayram, Mehmet; Candirli, Celal

2016-12-01

The aim of the study was to evaluate the dentoskeletal effects of the zygoma-gear appliance used for unilateral maxillary molar distalization in patients with Class II subdivision malocclusion. This prospective clinical study consisted of 21 patients (9 boys, 12 girls; mean age, 15.68 ± 2.18 years) with unilateral Class II malocclusion treated using the unilateral zygoma-gear appliance supported by a zygomatic miniplate inserted on the Class II malocclusion side. The dentoskeletal effects of the system were evaluated using cephalometric lateral and panoramic films with a paired t test. The mean amount of distalization for the maxillary first molar was found to be 5.31 ± 2.46 mm (P <0.001) in 0.45 ± 0.12 years, showing an amount of 0.98 mm of distalization per month. It was also accompanied by a slight intrusion (0.76 ± 2.85 mm; P >0.05) and distal tipping (6.39° ± 5.39°; P <0.001) of the maxillary molars. The maxillary premolar also spontaneously moved distally 1.63 ± 1.90 mm (P <0.01) with distal tipping (4.05° ± 3.47°; P <0.001). Moreover, the inclination of the maxillary incisors and overjet were decreased (-1.59° ± 1.45°, P <0.001; and -0.29 ± 0.63 mm, P <0.05; respectively) showing no anchorage loss. No statistically significant changes were found for the skeletal and soft tissue measurements (P >0.05). The zygoma-gear appliance system is an effective method for unilateral maxillary molar distalization. Copyright © 2016 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Biomechanical comparison of two intraoperative mobilization techniques for maxillary distraction osteogenesis: Down-fracture versus non-down-fracture

PubMed Central

Yang, Lili; Suzuki, Eduardo Yugo; Suzuki, Boonsiva

2014-01-01

Purposes: The purpose of this study was to compare the distraction forces and the biomechanical effects between two different intraoperative surgical procedures (down-fracture [DF] and non-DF [NDF]) for maxillary distraction osteogenesis. Materials and Methods: Eight patients were assigned into two groups according to the surgical procedure: DF, n = 6 versus NDF, n = 2. Lateral cephalograms taken preoperatively (T1), immediately after removal of the distraction device (T2), and after at least a 6 months follow-up period (T3) were analyzed. Assessment of distraction forces was performed during the distraction period. The Mann–Whitney U-test was used to compare the difference in the amount of advancement, the maximum distraction force and the amount of relapse. Results: Although a significantly greater amount of maxillary movement was observed in the DF group (median 9.5 mm; minimum-maximum 7.9-14.1 mm) than in the NDF group (median 5.9 mm; minimum-maximum 4.4-7.6 mm), significantly lower maximum distraction forces were observed in the DF (median 16.4 N; minimum-maximum 15.1-24.6 N) than in the NDF (median 32.9 N; minimum-maximum 27.6-38.2 N) group. A significantly greater amount of dental anchorage loss was observed in the NDF group. Moreover, the amount of relapse observed in the NDF group was approximately 3.5 times greater than in the DF group. Conclusions: In this study, it seemed that, the use of the NDF procedure resulted in lower levels of maxillary mobility at the time of the maxillary distraction, consequently requiring greater amounts of force to advance the maxillary bone. Moreover, it also resulted in a reduced amount of maxillary movement, a greater amount of dental anchorage loss and poor treatment stability. PMID:25593865

Anterior maxillary distraction using a tooth-borne device for hypoplastic cleft maxillas-a pilot study.

PubMed

Richardson, Sunil; Agni, Nisheet A; Selvaraj, Dhivakar

2011-12-01

The management of maxillary retrusion in a patient with cleft lip and palate is performed using Le Fort I advancement or distraction osteogenesis using an external or an internal device. Distraction mostly involves movement of the entire maxilla at the Le Fort I level and is characterized by a higher relapse rate and a hampering of speech. Hence, distraction of the anterior maxilla was performed using a tooth-borne palatal distractor similar to the one proposed by Gunaseelan et al (J Oral Maxillofac Surg 65:1044, 2007). However, the technique was modified by placing the distractor preoperatively before performing the osteotomy cut. The main advantage of this modification is that more control over the vector can be achieved and chances of cement failure caused by contamination and an inability to achieve isolation is drastically decreased. This study investigated the efficacy and stability of anterior maxillary distraction in the management of cleft maxillary retrognathia and any resulting complications. Fourteen patients older than 12 years with cleft maxillary retrognathia were included in the study irrespective of gender, type of cleft lip and palate, and the amount of advancement needed. The patients were evaluated using Orthopantomogram and lateral cephalograms preoperatively and at 3 months postoperatively (ie, before appliance removal) and at 6 months postoperatively. The distractor was fabricated extraorally on a cast and cemented into the patient's mouth the day before surgery. The initial deficiency, amount of advancement achieved, and relapses at 6 months, if any, were studied. The data were tabulated and analyzed. Only 1 of the 14 patients showed a relapse, of 2 mm, because this patient was lost to follow-up and thus delayed tooth replacement. Anterior maxillary distraction with a tooth-borne device is a feasible modality for the management of cleft maxillary retrognathia, with stable results. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Methamphetamine Users Have Increased Dental Disease: A Propensity Score Analysis.

PubMed

Shetty, V; Harrell, L; Clague, J; Murphy, D A; Dye, B A; Belin, T R

2016-07-01

Methamphetamine (MA) users are assumed to have a high burden of tooth decay. Less clear is how the distribution and severity of dental caries in MA users differ from the general population. Using a covariate-balancing propensity score strategy, we investigated the differential effects of MA use on dental caries by comparing the patterns of decayed, missing, and filled teeth in a community sample of 571 MA users with a subset of 2,755 demographically similar control individuals selected from a National Health and Nutrition Examination Survey (NHANES) cohort. Recruited over a 2-y period with a stratified sampling protocol, the MA users underwent comprehensive dental examinations by 3 trained and calibrated dentists using NHANES protocols. Propensity scores were estimated with logistic regression based on background characteristics, and a subset of closely matched subjects was stratified into quintiles for comparisons. MA users were twice as likely to have untreated caries (odds ratio [OR] = 2.08; 95% confidence interval [95% CI]: 1.55 to 2.78) and 4 times more likely to have caries experience (OR = 4.06; 95% CI: 2.24 to 7.34) than the control group of NHANES participants. Additionally, MA users were twice as likely to have 2 more decayed, missing, or filled teeth (OR = 2.08; 95% CI: 1.29 to 2.79) than the NHANES participants. The differential involvement of the teeth surfaces in MA users was quite distinctive, with carious surface involvement being highest for the maxillary central incisors, followed by maxillary posterior premolars and molars. Users injecting MA had significantly higher rates of tooth decay compared with noninjectors (P = 0.04). Although MA users experienced decayed and missing dental surfaces more frequently than NHANES participants, NHANES participants had more restored surfaces, especially on molars. The high rates and distinctive patterns of dental caries observed could be used 1) to alert dentists to covert MA use in their patients and 2) as the basis for comprehensive management strategies. © International & American Associations for Dental Research 2016.

The influence of bone substitute materials on the bone volume after maxillary sinus augmentation: a microcomputerized tomography study.

PubMed

Kühl, Sebastian; Brochhausen, Christoph; Götz, Hermann; Filippi, Andreas; Payer, Michael; d'Hoedt, Bernd; Kreisler, Matthias

2013-03-01

This study aims to evaluate the effect of adding bone substitute materials (BSM) to particulated autogenous bone (PAB) on the volume fraction (Vf) of newly formed bone after maxillary sinus augmentation. Thirty healthy patients undergoing maxillary sinus augmentation were included. PAB (N = 10), mixtures of PAB and beta-tricalciumphosphate (PAB/β-TCP) (N = 10), as well as PAB and β-TCP and hydroxyapatite (PAB/HA/β-TCP) (N = 10) were randomly used for sinus augmentation. A sample of the graft material was maintained from each patient at time of maxillary sinus augmentation, and Vfs of the PAB and/or BSM in the samples were determined by means of microcomputerized tomography (μ-CT). Five months later, samples of the grafted areas were harvested during implantation using a trephine bur. μ-CT analysis of these samples was performed, and the Vf of bone and BSM were compared with the data obtained 5 months earlier from the original material. The mean Vf of the bone showed a statistically significant increase (p < 0.05) in all groups after a healing period of 5 months without statistically significant difference between the groups. With regard to the increase of bone volume, it is not relevant if PAB is used alone or combined with β-TCP or HA/β-TCP. The amount of PAB and associated donor site morbidity may be reduced by adding BSM for maxillary sinus augmentation.

Cone-beam computed tomography as advanced diagnostic aid in endodontic treatment of molars with multiple canals: Two case reports

PubMed Central

Kamble, Amit Pralhad; Pawar, Rohini Rangarao; Mattigatti, Sudha; Mangala, T. M.; Makandar, Saleem

2017-01-01

The purpose of these case reports is to emphasize the importance of knowledge regarding the root canal morphology and current diagnostic aids one should have as both of these important factors going to affect the prognosis of the endodontic treatment. These two case reports describe the maxillary and mandibular first molars with multiple canals. After clinical and radiographic diagnosis, additional help of cone-beam computed tomography (CBCT) of mandibular molar has been taken to evaluate the morphology and canal pattern; while maxillary molar was evaluated using CBCT scan to evaluate the canal configuration and obturation. In CBCT evaluation, the mandibular molar was diagnosed with six separated canals with three mesial and three distal canals and with radix paramolaris and radix entomolaris. The maxillary molar had five canals with three mesiobuccal (MB) canals. Both molars were instrumented with conventional hand and rotary file systems and obturated by conventional lateral compaction method. The axial images from CBCT show Vertucci Type VIII canal pattern in both roots of first mandibular molars and in MB root of maxillary first molar Sert and Bayirli Type XVIII canal configuration and no accessory canal in distobuccal and palatal root. With the recent innovations in diagnostic and operating aids, we can come across many variations in the root canal morphology of both mandibular and maxillary teeth, especially multi-rooted one (i.e., molars), and the knowledge of which leads to successful endodontic treatment with an excellent prognosis. PMID:29259367

Changes in maxillofacial morphology and velopharyngeal function with two-stage maxillary distraction-mandibular setback surgery in patients with cleft lip and palate.

PubMed

Susami, T; Mori, Y; Ohkubo, K; Takahashi, M; Hirano, Y; Saijo, H; Takato, T

2018-03-01

Maxillary distraction is increasingly used for the correction of severe maxillary retrusion in patients with cleft lip and palate. However, control of the maxillary movement is difficult, and the need to wear visible distractors for a long period of time causes psychosocial problems. A two-stage surgical approach consisting of maxillary distraction and mandibular setback was developed to overcome these problems. In this study, changes in maxillofacial morphology and velopharyngeal function were examined in 22 patients with cleft lip and palate who underwent this two-stage approach. Lateral cephalograms taken just before the first surgery, immediately after the second surgery, and at completion of the active post-surgical orthodontic treatment were used to examine maxillofacial morphology. Velopharyngeal function was evaluated by speech therapists using a 4-point scale for hypernasality. The average forward movement of the maxilla with surgery at point A was 7.5mm, and the average mandibular setback at pogonion was 8.6mm. The average relapse rate during post-surgical orthodontic treatment was 25.2% for the maxilla and 11.2% for the mandible. After treatment, all patients had positive overjet, and skeletal relapse was covered by tooth movement during postoperative orthodontics. Velopharyngeal function was not changed by surgery. This method can shorten the period during which the distractors have to be worn and reduce the patient burden. Copyright © 2017 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Evaluation of possible prognostic factors for the success, survival, and failure of dental implants.

PubMed

Geckili, Onur; Bilhan, Hakan; Geckili, Esma; Cilingir, Altug; Mumcu, Emre; Bural, Canan

2014-02-01

To analyze the prognostic factors that are associated with the success, survival, and failure rates of dental implants. Data including implant sizes, insertion time, implant location, and prosthetic treatment of 1656 implants have been collected, and the association of these factors with success, survival, and failure of implants was analyzed. The success rate was lower for short and maxillary implants. The failure rate of maxillary implants exceeded that of mandibular implants, and the failure rate of implants that were placed in the maxillary anterior region was significantly higher than other regions. The failure rates of implants that were placed 5 years ago or more were higher than those that were placed later. Anterior maxilla is more critical for implant loss than other sites. Implants in the anterior mandible show better success compared with other locations, and longer implants show better success rates. The learning curve of the clinician influences survival and success rates of dental implants.

Analysis of midpalatal miniscrew-assisted maxillary molar distalization patterns with simultaneous use of fixed appliances: A preliminary study

PubMed Central

Mah, Su-Jung; Kim, Ji-Eun; Ahn, Eun Jin; Nam, Jong-Hyun; Kim, Ji-Young

2016-01-01

Skeletal anchorage-assisted upper molar distalization has become one of the standard treatment modalities for the correction of Class II malocclusion. The purpose of this study was to analyze maxillary molar movement patterns according to appliance design, with the simultaneous use of buccal fixed orthodontic appliances. The authors devised two distinct types of midpalatal miniscrew-assisted maxillary molar distalizers, a lingual arch type and a pendulum type. Fourteen patients treated with one of the two types of distalizers were enrolled in the study, and the patterns of tooth movement associated with each type were compared. Pre- and post-treatment lateral cephalograms were analyzed. The lingual arch type was associated with relatively bodily upper molar distalization, while the pendulum type was associated with distal tipping with intrusion of the upper molar. Clinicians should be aware of the expected tooth movement associated with each appliance design. Further well designed studies with larger sample sizes are required. PMID:26877983

Changes consequent to maxillary molar distalization with the bone-anchored pendulum appliance.

PubMed

Cambiano, Aldo Otazú; Janson, Guilherme; Fuziy, Acácio; Garib, Daniela Gamba; Lorenzoni, Diego Coelho

2017-01-01

This retrospective study aimed to evaluate the dentoalveolar, skeletal, and soft tissue effects obtained with bone-anchored pendulum appliance in patients with Class II malocclusion. A total of 18 patients (4 male, 14 female) at a mean pretreatment age of 14.0 years (+1.08) were enrolled in this study. All patients were treated with the bone-anchored pendulum appliance for an average duration of 4.8 months. Only the active distalization period was evaluated with predistalization and postdistalization lateral cephalograms. Skeletal, dentoalveolar, and soft tissue variables were obtained. Based on these variables, the treatment effects were evaluated with dependent t -test. Correction of Class II molar relationship resulted from distal movement of 3.45 mm and tipping of 11.24° of the first maxillary molars. The premolars were distalized accompanying the molars. The bone-anchored pendulum appliance proved to be an effective method for distalization of maxillary molars in cases that require maximum anchorage, avoiding reciprocal mesial movement of premolars and incisors.

Transparent aligners: An invisible approach to correct mild skeletal class III malocclusion

PubMed Central

Yezdani, A. Arif

2015-01-01

This case report highlights the treatment of a mild skeletal class III malocclusion with an invisible thermoplastic retainer. A 15-year-old female patient presented with a mild skeletal class III malocclusion with a retrognathic maxilla, orthognathic mandible, a low mandibular plane angle with Angle's class III malocclusion with maxillary lateral incisors in anterior cross-bite with crowding of maxillary anteriors, imbricated and rotated mandibular incisors and deep bite. Accurate upper and lower impressions and a bite registration were taken with polyvinyl siloxane rubber base impression material. This was then sent to the lab for the processing of a series of ClearPath aligners. The ClearPath virtual set-up sent from the lab provided the treatment plan and interproximal reduction estimation complete with posttreatment results. This enabled the clinician to actively participate in the treatment plan and provide the necessary suggestions. The ClearPath three-dimensional aligner was found to have effectively corrected the anterior cross-bite and crowding of the maxillary anteriors. PMID:26015738

Long-term stability of soft tissue changes in anterior open bite adults treated with zygomatic miniplate-anchored maxillary posterior intrusion.

PubMed

Marzouk, Eiman S; Kassem, Hassan E

2018-03-01

To evaluate soft tissue changes and their long-term stability in skeletal anterior open bite adults treated by maxillary posterior teeth intrusion using zygomatic miniplates and premolar extractions. Lateral cephalograms of 26 patients were taken at pretreatment (T1), posttreatment (T2), 1 year posttreatment (T3), and 4 years posttreatment (T4). At the end of treatment, the soft tissue facial height and profile convexity were reduced. The lips increased in length and thickness, with backward movement of the upper lip and forward movement of the lower lip. The total relapse rate ranged from 20.2% to 31.1%. At 4 years posttreatment, 68.9% to 79.8% of the soft tissue treatment effects were stable. The changes in the first year posttreatment accounted for approximately 70% of the total relapse. Soft tissue changes following maxillary posterior teeth intrusion with zygomatic miniplates and premolar extractions appear to be stable 4 years after treatment.

A comparative study of two different uncinectomy techniques: swing-door and classical.

PubMed

Singhania, Ankit A; Bansal, Chetan; Chauhan, Nirali; Soni, Saurav

2012-01-01

The aim of this study was to determine which technique of uncinectomy, classical or swing door technique. Four hundred eighty Cases of sinusitis were selected and operated for Functional Endoscopic Sinus Surgery (FESS). Out of these, in 240 uncinectomies classical uncinectomy was done whereas in another 240 uncinectomies swing door technique was used. Initially patients were medically managed treated according to their symptoms and prior management. Patients who had received previous adequate medical management were evaluated with CT scan of the sinuses. If disease still persists than they were operated for FESS. The authors' experience indicates that Functional endoscopic sinus surgery can be performed under local or general anesthesia, as permitted or tolerated. In this review classical technique was used in 240 uncinectomies. Out of this, ethmoidal complex injury was noted in 4 cases, missed maxillary ostium syndrome (incomplete removal) was reported in 12 patients and orbital fat exposure was encountered in 5 patients. As compared to 240 uncinectomies done with swing door technique, incomplete removal was evident in 2 cases and lacrimal duct injury was reported in 3 cases. 'Evidence that underscores how this 'swing door technique' successfully combines 'the conservation goals of the anterior-to-posterior approach and anatomic virtues of the posterior-to-anterior approach to ethmoidectomy of the total 480 uncinectomies operated. Out of which 240 uncinectomies have been performed using the 'swing-door' technique. The 240 uncinectomies performed using classical technique were used as controls. The incidence of orbital penetration, incomplete removal, ethmoidal complex injury and ostium non-identification was significantly less with the new technique. Three lacrimal injuries occurred with the 'swing-door' technique compared to no injuries with classical technique. The authors recommend swing door technique as it is easy to learn, allows complete removal of the uncinate flush with the lateral nasal wall and allows easy identification of the natural ostium of the maxillary sinus without injuring the ethmoidal complex.

The clinical assessment of aggressive periodontitis patients

PubMed Central

Cho, Chan-Myung; You, Hyung-Keun

2011-01-01

Purpose Few epidemiologic studies have investigated aggressive periodontitis in Koreans, but such studies of disease prevalence and other clinical characteristics would be invaluable in providing proper treatment. The aim of this study was to assess the prevalence of aggressive periodontitis and to measure the extent of associated periodontal breakdown. Methods The study population consisted of 1,692 patients who visited the Department of Periodontology, Wonkwang Daejeon Dental Hospital from January to December, 2010. Clinical parameters (probing depth, gingival recession, periodontal attachment loss) were measured by a single examiner, and radiographic examination was performed at the baseline. Results Twenty-eight (1.65%) patients showed clinical features of aggressive periodontitis, of which 27 patients exhibited the generalized form, and 1 exhibited the localized form. There was no significant difference between the percentage of male and female patients. The probing pocket depth of the maxillary first molar was deeper than that of the other teeth and gingival recession was also the most serious at the maxillary first molar. The periodontal attachment loss was the highest at the maxillary first molar. The average number of missing teeth was 1.29 per subject. Loss of the second molar was prominent. Conclusions Within the limitations of this study, the periodontal breakdown evaluated by attachment loss was found to be most severe at the first molars of aggressive periodontitis patients. However, further large scale multicenter studies are necessary to access more precise data, including prevalence. PMID:21811690

Displacement of a dental implant into the maxillary sinus after internal sinus floor elevation: report of a case and review of literature.

PubMed

Ding, Xiaojun; Wang, Qing; Guo, Xuehua; Yu, Youcheng

2015-01-01

Dental implant placement in the posterior maxilla may be complicated by implant migration into the maxillary sinus. To report the clinical and radiological characteristics of a patient who experienced dental implant displacement into the maxillary sinus following sinus floor elevation, and to compare our findings with those of other published reports of the displacement of dental implants. Implant placement and maxillary sinus elevation were performed simultaneously. The location of the displaced implant was monitored for 8 years, until the ectopic implant was surgically removed using the lateral window approach. The contributing factors, treatment modality, and clinical outcome for our patient were compared with those of patients reported in the literature. The clinical characteristics of our case were similar to those of patients with displaced implants who were also asymptomatic for long periods. The clinical outcome of our case was consistent with that of patients who underwent similar surgeries. Transnasal endoscopic removal of an ectopic implant may be suitable in cases in which the ectopic implant is accessible. Transoral direct approaches are adequate in most cases in which endoscopic approaches may be confounded. The bony-window transoral technique may allow the removal of large implants.

Infraorbital nerve transposition to expand the endoscopic transnasal maxillectomy.

PubMed

Salzano, Giovanni; Turri-Zanoni, Mario; Karligkiotis, Apostolos; Zocchi, Jacopo; Dell'Aversana Orabona, Giovanni; Califano, Luigi; Battaglia, Paolo; Castelnuovo, Paolo

2017-02-01

The infraorbital nerve (ION) is a terminal branch of the maxillary nerve (V2) providing sensory innervation to the malar skin. It is sometimes necessary to sacrifice the ION and its branches to obtain adequate maxillary sinus exposure for radical resection of sinonasal tumors. Consequently, patients suffer temporary or permanent paresthesia, hypoestesthia, and neuralgia of the face. We describe an innovative technique used for preservation of the ION while removing the anterior, superior, and lateral walls of the maxillary sinus through a medial endoscopic transnasal maxillectomy. All patients who underwent transnasal endoscopic maxillectomy with ION transposition in our institute were retrospectively reviewed. Two patients were identified who had been treated for sinonasal cancers using this approach. No major complications were observed. Transient loss of ION function was observed with complete recovery of skin sensory perception within 6 months of surgery. One patient referred to a mild permanent anesthesia of the upper incisors. No diplopia or enophthalmos were encountered in any of the patients. The ION transposition is useful for selected cases of benign and malignant sinonasal tumors that do not infiltrate the ION itself but involve the surrounding portion of the maxillary sinus. Anatomic preservation of the ION seems to be beneficial to the postoperative quality of life of such patients. © 2016 ARS-AAOA, LLC.

Assessment of the dental and skeletal effects of fan-type rapid maxillary expansion screw and Hyrax screw on craniofacial structures.

PubMed

Gopalakrishnan, Umarevathi; Sridhar, Premkumar

2017-01-01

The purpose of the study was to assess the skeletal and dental effects of fan-type rapid maxillary expansion (RME) appliance and Hyrax RME appliance on the craniofacial structures. The sample of the study included 12 patients with constricted maxillary arches. Acrylic bonded type of attachment was used for both groups. Changes in sagittal, vertical, and transverse relationship were assessed with lateral and frontal cephalograms, respectively. Intercanine and intermolar widths were measured with stone models. Pre- and immediate post-treatment records were statistically analyzed with Wilcoxon signed-rank test. The differences between the groups were evaluated using Mann-Whitney U-test. Since the data pertaining to intercanine width and intermolar width were normally distributed, parametric test of significance (unpaired t -test) was used to compare them. Results showed that Hyrax presented with significantly greater increments for both nasal cavity width and maxillary width when compared to fan-type RME. Both groups had retroclination of incisors. The increase in the intercanine width was almost similar in both groups. Fan-type RME caused only minimal expansion of the intermolar width when compared to the Hyrax. The ratio between the intercanine and intermolar width expansion was nearly 4:1 in the fan-type RME and 0.75:1 in Hyrax.

Stability of maxillary position after Le Fort I osteotomy using self-reinforced biodegradable poly-70L/30DL-lactide miniplates and screws.

PubMed

Kim, Bong Chul; Padwa, Bonnie L; Park, Hyung-Sik; Jung, Young-Soo

2011-05-01

The purpose of this study was to evaluate the stability of Le Fort I osteotomy using self-reinforced biodegradable poly-70L/30DL-lactide miniplates and screws. Nineteen patients who had Le Fort I osteotomy and internal fixation using self-reinforced biodegradable poly-70L/30DL-lactide miniplates and screws were evaluated both radiographically and clinically. Changes in maxillary position after operation were documented 1 week, 1, 3, 6 mo, and/or 1-yr postoperatively with lateral cephalometric tracings. Complications of the self-reinforced biodegradable poly-70L/30DL-lactide miniplates and screws were evaluated by follow-up roentgenograms and clinical observation. A mixed model analysis for repeated measures was used for statistical analysis. Maxillary position was stable after operation with no change between time points (P > .05). There were no complications with the self-reinforced biodegradable poly-70L/30DL-lactide miniplates and screws. Internal fixation of the maxilla after Le Fort I osteotomy with self-reinforced biodegradable poly-70L/30DL-lactide miniplates and screws is a reliable method for maintaining the postoperative maxillary position after Le Fort I osteotomy. Copyright © 2011 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

One-stage tooth-borne distraction versus two stage bone-borne distraction in surgically assisted maxillary expansion (SARME).

PubMed

Seeberger, Robin; Abe-Nickler, Dorothee; Hoffmann, Jürgen; Kunzmann, Kevin; Zingler, Sebastian

2015-12-01

To evaluate and compare the effects of tooth-borne and bone-borne distraction devices in surgically assisted maxillary expansion (SARME) on dental and skeletal structures. A sample of 33 skeletally mature patients with transverse maxillary deficiencies was examined with cone beam computed tomography (CBCT) before and 3 months after surgery. Fourteen patients were treated with tooth-borne devices and 19 patients with bone-borne devices. Dental crown expansion in the first premolars did not differ significantly between the two groups, and median expansion was 5.55 mm (interquartile range [IQR] 5.23) in the tooth-borne device group and 4.6 mm (IQR 3.4) in the bone-borne device group. In the first molars, crown expansion and lateral tipping were significantly greater in the tooth-borne device group (P ≤ .02). The median skeletal nasal isthmus increase was significantly more in the bone-borne device group at 3.0 mm than in the tooth-borne device group at 0.98 mm (P ≤ .02). Both tooth-borne and bone-borne devices are effective treatment modalities to correct maxillary transverse deficiencies. Bone-borne devices produced greater widening of the skeletal nasal floor and fewer dental side effects in the first molars. Copyright © 2015 Elsevier Inc. All rights reserved.

Morphological evaluation of changes in velopharyngeal function following maxillary distraction in patients with repaired cleft palate during mixed dentition.

PubMed

Satoh, Koichi; Nagata, Junko; Shomura, Kenji; Wada, Takeshi; Tachimura, Takashi; Fukuda, Jinichi; Shiba, Ryosuke

2004-07-01

To describe the morphological changes of nasopharyngeal components after maxillary distraction and clarify whether the morphological characteristics are related to velopharyngeal function (VPF). Perceptual judgments of hypernasality and nasendoscopy were performed before and after treatment. Lateral cephalograms were obtained to describe the morphological changes. Department of Oral and Maxillofacial Surgery, Miyazaki Medical College, Miyazaki, Japan. Nine patients with repaired cleft palate in the mixed dentition stage underwent maxillary distraction using a face mask and an intraoral fixed appliance system. The severity of hypernasality, velopharyngeal insufficiency, and measurements such as pharyngeal depth, velar length, and the rotation of the palatal plane were evaluated. Increase in pharyngeal depth was not always proportional to the amount of advancement. It depended on the posture of the posterior pharyngeal wall and the rotation of palatal plane. Cephalometric measurements of the nasopharynx before and after surgery confirmed subsequent changes in VPF. These were suggested to be useful in predicting future VPF. When performing maxillary distraction in patients with cleft palate in the mixed dentition stage, and when velopharyngeal closure is found to occur by velar contact against the hypertrophied adenoid, patients should be counseled about risks of subsequent deterioration in their speech before surgery.

Allometric scaling of infraorbital surface topography in Homo.

PubMed

Maddux, Scott D; Franciscus, Robert G

2009-02-01

Infraorbital morphology is often included in phylogenetic and functional analyses of Homo. The inclusion of distinct infraorbital configurations, such as the "canine fossa" in Homo sapiens or the "inflated" maxilla in Neandertals, is generally based on either descriptive or qualitative assessments of this morphology, or simple linear chord and subtense measurements. However, the complex curvilinear surface of the infraorbital region has proven difficult to quantify through these traditional methods. In this study, we assess infraorbital shape and its potential allometric scaling in fossil Homo (n=18) and recent humans (n=110) with a geometric morphometric method well-suited for quantifying complex surface topographies. Our results indicate that important aspects of infraorbital shape are correlated with overall infraorbital size across Homo. Specifically, individuals with larger infraorbital areas tend to exhibit relatively flatter infraorbital surface topographies, taller and narrower infraorbital areas, sloped inferior orbital rims, anteroinferiorly oriented maxillary body facies, posteroinferiorly oriented maxillary processes of the zygomatic, and non-everted lateral nasal margins. In contrast, individuals with smaller infraorbital regions generally exhibit relatively depressed surface topographies, shorter and wider infraorbital areas, projecting inferior orbital rims, posteroinferiorly oriented maxillary body facies, anteroinferiorly oriented maxillary processes, and everted lateral nasal margins. These contrasts form a continuum and only appear dichotomized at the ends of the infraorbital size spectrum. In light of these results, we question the utility of incorporating traditionally polarized infraorbital morphologies in phylogenetic and functional analyses without due consideration of continuous infraorbital and facial size variation in Homo. We conclude that the essentially flat infraorbital surface topography of Neandertals is not unique and can be explained, in part, as a function of possessing large infraorbital regions, the ancestral condition for Homo. Furthermore, it appears likely that the diminutive infraorbital region of anatomically modern Homo sapiens is a primary derived trait, with related features such as depressed infraorbital surface topography expressed as correlated secondary characters.

Clinicopathological study of 252 jaw bone periapical lesions from a private pathology laboratory.

PubMed

Lin, Hung-Pin; Chen, Hsin-Ming; Yu, Chuan-Hang; Kuo, Ru-Cheng; Kuo, Ying-Shiung; Wang, Yi-Ping

2010-11-01

Periapical lesions are common sequelae of pulp diseases. This retrospective study evaluated the clinical and histopathological features of periapical lesions sent to a private pathology laboratory by dentists in private clinics. Two hundred and fifty-two consecutive cases of periapical lesions were collected from September 2005 to October 2009. Clinical data and histopathological features of these periapical lesions were reviewed and analyzed. The 252 periapical lesions consisted of 128 periapical granulomas, 117 periapical cysts, and seven periapical scars. These 252 lesions were taken from 252 patients (92 men and 160 women; mean age = 43.6 years; range, 9-81 years). Of the 252 periapical lesions, 186 were found in the maxilla and 66 in the mandible. The most common site for periapical lesions was the maxillary anterior region (134 cases, including 73 granulomas, 54 cysts and 7 scars), and the most frequently involved tooth was the maxillary lateral incisor (64 cases, including 29 granulomas, 31 cysts and 4 scars). Of the 117 periapical cysts, 116 were lined by stratified squamous epithelium and one by mucoepidermoid epithelium. Hyaline bodies were discovered in the lining epithelium of four periapical cysts. Odontogenic epithelial rest, cholesterol cleft, foamy histiocytes, hemosiderin-laden macrophages, dystrophic calcification, foreign bodies, and bacterial clumps were found in five, three, nine, two, 28, 10 and one periapical granulomas, respectively, as well as in six, 11, eight, seven, 19, nine and eight periapical cysts, respectively. Granulomas and cysts were the two most common periapical lesions. Periapical lesions occurred more frequently in female patients and in those in their fourth to fifth decades. The most commonly affected site for periapical lesions was the maxillary anterior region, and the most frequently involved tooth was the maxillary lateral incisor. Copyright © 2010 Formosan Medical Association & Elsevier. Published by Elsevier B.V. All rights reserved.

Changes in anteroposterior position and inclination of the maxillary incisors after surgical-orthodontic treatment of skeletal class III malocclusions.

PubMed

Zou, Bingshuang; Zhou, Yang; Lowe, Alan A; Li, Huiqi; Pliska, Benjamin

2015-12-01

The purpose of this study was to evaluate and compare the anteroposterior (AP) position and inclination of the maxillary incisors in subjects with class I normal occlusion and a harmonious profile with patients with skeletal class III malocclusions, and to investigate the changes in maxillary incisor inclination and AP position after surgical-orthodontic treatment in class III patients. Sixty-five subjects (35 female and 30 male; mean age: 21.8 ± 3.89 years) with normal profiles and class I skeletal and dental patterns were selected as a control sample. Sixty-seven patients (38 female and 29 male; mean age: 21.3 ± 3.31 years) with skeletal and dental class III malocclusions who sought surgical-orthodontic treatment were used as the study sample. Subjects were asked to smile and profile photographs were taken with the head in a natural position and the maxillary central incisors and the forehead in full view; cephalograms were taken and superimposed on the profile pictures according to the outline of the forehead and nose. Forehead inclination, maxillary incisor facial inclination and the AP position of the maxillary central incisor relative to the forehead (FAFFA) were measured on the integrated images and statistical analyses were performed. In both groups, there were no significant male/female differences in either the maxillary central incisor inclination or AP position. Female subjects had a significantly steeper forehead inclination compared with males (P < 0.001) in both groups. After combined surgical-orthodontic treatment, the significant labial inclination (P < 0.001) and posterior positioning (P < 0.001) of the maxillary central incisors had been corrected to close to normal range (P > 0.05). In the control group, 84.6% had the facial axial point (FA) of their maxillary central incisors positioned between lines through the forehead facial axis (FFA) point and the glabella. In the study group, however, 79.1% had the maxillary central incisors positioned posterior to the line through the FFA point and the difference with the control group was statistically significant (P < 0.001). The position of the maxillary central incisors was strongly correlated with forehead inclination in the control sample (r(2) = 0.456; P < 0.01), but only a poor correlation was detected in the class III group (r(2) = 0.177; P > 0.05). With the integrated radiograph-photograph method, the lateral cephalogram was reoriented, which makes it possible to accurately measure the variables on profile photographs. The AP position and inclination of the maxillary central incisors relative to the forehead plays an important role in the esthetics of the profile during smiling and could be an important variable to be considered during diagnosis and treatment planning. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

Dental and maxillofacial characteristics of six Japanese individuals with ectrodactyly-ectodermal dysplasia-clefting syndrome.

PubMed

Okamura, Erika; Suda, Naoto; Baba, Yoshiyuki; Fukuoka, Hiroki; Ogawa, Takuya; Ohkuma, Mizue; Ahiko, Nozomi; Yasue, Akihiro; Tengan, Toshimoto; Shiga, Momotoshi; Tsuji, Michiko; Moriyama, Keiji

2013-03-01

Objective : Ectrodactyly-ectodermal dysplasia-clefting syndrome is a congenital anomaly characterized by ectodermal dysplasia, ectrodactyly, cleft lip and palate, and lacrimal duct anomalies. Because this syndrome is frequently accompanied by a congenital lack of teeth, narrow palate, and malocclusion, comprehensive orthodontic intervention is required. Design : To highlight the specific dental and maxillofacial characteristics of ectrodactyly-ectodermal dysplasia-clefting syndrome, six Japanese individuals diagnosed with the syndrome are described here. Patients : The subjects consisted of two boys and four girls (age range, 6.0 to 13.9 years) diagnosed with ectrodactyly-ectodermal dysplasia-clefting syndrome by medical and dental specialists. Their conditions included ectodermal dysplasia (hypodontia, microdontia, enamel hypoplasia, and abnormalities in hair and nails), cleft lip and/or palate, and ectrodactyly. Cephalograms, panoramic x-rays, and dental casts were taken; systemic complications were recorded at the first visit to our dental hospital. Results : All individuals had severe oligodontia with 9 to 18 missing teeth. The missing teeth were mainly maxillary and mandibular incisors and second bicuspids, arranged in a symmetrical manner. Cephalometric analysis showed retruded and short maxilla due to cleft lip and/or palate. It is interesting that all individuals showed a characteristically shaped mandibular symphysis with a retruded point B. It is likely that this unusual symphyseal morphology is due to the lack of mandibular incisors. Conclusions : This study demonstrates the presence of severe oligodontia in the incisal and premolar regions and describes a characteristic maxillary and mandibular structure in Japanese individuals with ectrodactyly-ectodermal dysplasia-clefting syndrome.

Genetic integration of molar cusp size variation in baboons

PubMed Central

Koh, Christina; Bates, Elizabeth; Broughton, Elizabeth; Do, Nicholas T.; Fletcher, Zachary; Mahaney, Michael C.; Hlusko, Leslea J.

2010-01-01

Many studies of primate diversity and evolution rely on dental morphology for insight into diet, behavior, and phylogenetic relationships. Consequently, variation in molar cusp size has increasingly become a phenotype of interest. In 2007 we published a quantitative genetic analysis of mandibular molar cusp size variation in baboons. Those results provided more questions than answers, as the pattern of genetic integration did not fit predictions from odontogenesis. To follow up, we expanded our study to include data from the maxillary molar cusps. Here we report on these later analyses, as well as inter-arch comparisons with the mandibular data. We analyzed variation in two-dimensional maxillary molar cusp size using data collected from a captive pedigreed breeding colony of baboons, Papio hamadryas, housed at the Southwest National Primate Research Center. These analyses show that variation in maxillary molar cusp size is heritable and sexually dimorphic. We also estimated additive genetic correlations between cusps on the same crown, homologous cusps along the tooth row, and maxillary and mandibular cusps. The pattern for maxillary molars yields genetic correlations of one between the paracone-metacone and protocone-hypocone. Bivariate analyses of cuspal homologues on adjacent teeth yield correlations that are high or not significantly different from one. Between dental arcades, the non-occluding cusps consistently yield high genetic correlations, especially the metaconid-paracone and metaconid-metacone. This pattern of genetic correlation does not immediately accord with the pattern of development and/or calcification, however these results do follow predictions that can be made from the evolutionary history of the tribosphenic molar. PMID:20034010

Genetic integration of molar cusp size variation in baboons.

PubMed

Koh, Christina; Bates, Elizabeth; Broughton, Elizabeth; Do, Nicholas T; Fletcher, Zachary; Mahaney, Michael C; Hlusko, Leslea J

2010-06-01

Many studies of primate diversity and evolution rely on dental morphology for insight into diet, behavior, and phylogenetic relationships. Consequently, variation in molar cusp size has increasingly become a phenotype of interest. In 2007 we published a quantitative genetic analysis of mandibular molar cusp size variation in baboons. Those results provided more questions than answers, as the pattern of genetic integration did not fit predictions from odontogenesis. To follow up, we expanded our study to include data from the maxillary molar cusps. Here we report on these later analyses, as well as inter-arch comparisons with the mandibular data. We analyzed variation in two-dimensional maxillary molar cusp size using data collected from a captive pedigreed breeding colony of baboons, Papio hamadryas, housed at the Southwest National Primate Research Center. These analyses show that variation in maxillary molar cusp size is heritable and sexually dimorphic. We also estimated additive genetic correlations between cusps on the same crown, homologous cusps along the tooth row, and maxillary and mandibular cusps. The pattern for maxillary molars yields genetic correlations of one between the paracone-metacone and protocone-hypocone. Bivariate analyses of cuspal homologues on adjacent teeth yield correlations that are high or not significantly different from one. Between dental arcades, the nonoccluding cusps consistently yield high genetic correlations, especially the metaconid-paracone and metaconid-metacone. This pattern of genetic correlation does not immediately accord with the pattern of development and/or calcification, however these results do follow predictions that can be made from the evolutionary history of the tribosphenic molar. Copyright 2009 Wiley-Liss, Inc.

Unpredictability of soft tissue changes after camouflage treatment of Class II division 1 malocclusion with maximum anterior retraction using miniscrews.

PubMed

Kim, Kayoung; Choi, Sung-Hwan; Choi, Eun-Hee; Choi, Yoon-Jeong; Hwang, Chung-Ju; Cha, Jung-Yul

2017-03-01

To compare soft and hard tissue responses based on the degree of maxillary incisor retraction using maximum anchorage in patients with Class II division 1 malocclusion. This retrospective study sample was divided into moderate retraction (<8.0 mm; n = 28) and maximum retraction (≥8.0 mm; n = 29) groups based on the amount of maxillary incisor retraction after extraction of the maxillary and mandibular first premolars for camouflage treatment. Pre- and posttreatment lateral cephalograms were analyzed. There were 2.3 mm and 3.0 mm of upper and lower lip retraction, respectively, in the moderate group; and 4.0 mm and 5.3 mm, respectively, in the maximum group. In the moderate group, the upper lip was most influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.94). The lower lip was most influenced by posterior movement of B-point (β = 0.84) and the cervical point of the mandibular incisor (β = 0.83). Prediction was difficult in the maximum group; no variable showed a significant influence on upper lip changes. The lower lip was highly influenced by posterior movement of the cervical point of the maxillary incisor (β = 0.50), but this correlation was weak in the maximum group. Posterior movement of the cervical point of the anterior teeth is necessary for increased lip retraction. However, periodic evaluation of the lip profile is needed during maximum retraction of the anterior teeth because of limitations in predicting soft tissue responses.

Comparison of intrusion effects on maxillary incisors among mini implant anchorage, j-hook headgear and utility arch.

PubMed

Jain, Ravindra Kumar; Kumar, Sridhar Prem; Manjula, W S

2014-07-01

Intrusion of maxillary incisors is one of the most important and difficult tooth movements to achieve as a part of orthodontic therapy. A variety of techniques were used in the past to intrude the maxillary incisors before the emergence of mini implants in Orthodontics. Mini implants are temporary anchorage devices used to produce various tooth movements. The research was carried out to evaluate and compare the efficiency of producing intrusion of maxillary incisors using mini implants, utility arch and j- hook headgear. The study was conducted on 30 subjects divided into 3 Groups equally. Group 1- mini implant anchorage, Group 2 - j- hooks headgear and Group 3- utility arch were used for intrusion of the maxillary incisors. Conventional lateral cephalograms were taken before treatment and at the end of intrusion. Five cephalometric parameters were used to measure the amount of intrusion attained in each Group. Intra Group comparisons were done using student t-test and inter Group comparisons were done using ANOVA The duration of intrusion was four months in all the three Groups. In Group 1 the mean average intrusion attained was 2.1 mm, the mean average intrusion attained in Group 2 was 0.7 mm, and the mean average intrusion achieved in Group 3 was 1.4 mm with a side effect of 0.75 mm of molar extrusion. Although, both mini implants and utility arch can be used to attain significant amounts of incisor intrusion but using mini implants will produce true intrusion without any other side effects.

External apical root resorption in maxillary incisors in orthodontic patients: associated factors and radiographic evaluation.

PubMed

Nanekrungsan, Kamonporn; Patanaporn, Virush; Janhom, Apirum; Korwanich, Narumanus

2012-09-01

This study was performed to evaluate the incidence and degree of external apical root resorption of maxillary incisors after orthodontic treatment and to evaluate particular associated factors related to external apical root resorption. The records and maxillary incisor periapical radiographs of 181 patients were investigated. Crown and root lengths were measured and compared on the pre- and post-treatment periapical radiographs. Crown length was measured from the center of the incisal edge to the midpoint of the cemento-enamel junction (CEJ). Root length was measured from the CEJ midpoint to the root apex. A correction factor for the enlargement difference was used to calculate root resorption. The periapical radiographs of 564 teeth showed that the average root resorption was 1.39±1.27 (8.24±7.22%) and 1.69±1.14 mm (10.16±6.78%) for the maxillary central and lateral incisors, respectively. The results showed that the dilacerated or pointed roots, maxillary premolar extraction cases, and treatment duration were highly significant factors for root resorption (p<0.001). Allergic condition was a significant factor at p<0.01. Age at the start of treatment, large overjet, and history of facial trauma were also factors significantly associated with root resorption (p<0.05). There was no statistically significant difference in root resorption among the factors of gender, overbite, tongue-thrusting habit, types of malocclusion, and types of bracket. These results suggested that orthodontic treatment should be carefully performed in pre-treatment extraction patients who have pointed or dilacerated roots and need long treatment duration.

Short-term changes in temporomandibular joint function in subjects with cleft lip and palate treated with maxillary distraction osteogenesis.

PubMed

Hashimoto, K; Otsuka, R; Minato, A; Sato-Wakabayashi, M; Takada, J; Inoue-Arai, M S; Miyamoto, J J; Ono, T; Ohyama, K; Moriyama, K

2008-05-01

To investigate the short-term effects of maxillary distraction osteogenesis (DO) on temporomandibular joint (TMJ) function in 21 subjects with cleft lip and palate (CLP). Design - Morphological changes in the maxillofacial region were measured using lateral cephalometric radiographs taken immediately before (pre-DO) and after DO (post-DO) and 1 year after DO (1-year follow-up). A questionnaire was evaluated using a visual analog scale. A chi-square test was used to compare the prevalence of TMJ symptoms between pre-DO and 1-year follow-up. The Spearman correlation coefficient was used to determine the correlation between changes in cephalometric variables and TMJ symptoms in association with maxillary DO. Statistical significance was set at p < 0.05. Results - The ANB (anteroposterior relationship of the maxilla with the mandible) angle and the mandibular plane angle at pre-DO, post-DO, and 1-year follow-up were -4.3 degrees , +5.8 degrees , +4.3 degrees and 32.1 degrees , 33.5 degrees , 33.6 degrees , respectively. The average amounts of anterior and downward movement of the maxilla at post-DO and 1-year follow-up were 8.3, -1.3 and 0.9, 1.1 mm, respectively. The prevalence of TMJ symptoms showed no significant increase in association with maxillary DO. Moreover, there was no significant correlation between changes in cephalometric variables and TMJ symptoms. Conclusion - These results suggest that there was no short-term (i.e., up to 1 year after DO) effect of maxillary DO on TMJ function in subjects with CLP.

Endoscopic endonasal anatomy of superior orbital fissure and orbital apex regions: critical considerations for clinical applications.

PubMed

Dallan, Iacopo; Castelnuovo, Paolo; de Notaris, Matteo; Sellari-Franceschini, Stefano; Lenzi, Riccardo; Turri-Zanoni, Mario; Battaglia, Paolo; Prats-Galino, Alberto

2013-05-01

The superior orbital fissure is a critical three-dimensional space connecting the middle cranial fossa and the orbit. From an endoscopic viewpoint, only the medial aspect has a clinical significance. It presents a critical relationship with the lateral sellar compartment, the pterygopalatine fossa and the middle cranial fossa. The connective tissue layers and neural and vascular structures of this region are described. The role of Muller's muscle is confirmed, and the utility of the maxillary and optic strut is outlined. Muller's muscle extends for the whole length of the inferior orbital fissure, passes over the maxillary strut and enters the superior orbital fissure, representing a critical surgical landmark. Dividing the tendon between the medial and inferior rectus muscle allows the identification of the main trunk of the oculomotor nerve, and a little laterally, it is usually possible to visualize the first part of the ophthalmic artery. Based on a better knowledge of anatomy, we trust that this area could be readily addressed in clinical situations requiring an extended approach in proximity of the orbital apex.

Orthodontic extrusion of Ellis Class VIII fracture of maxillary lateral incisor - The sling shot method.

PubMed

Felicita, A Sumathi

2018-07-01

The aim of this paper is to evaluate the efficacy of forced extrusion using the sling shot elastic. A 21 year adult patient reported with an Ellis Class VIII fracture of the maxillary right lateral incisor. Root canal treatment followed by a fiber reinforced composite post was placed and core build up was done. A metal button was bonded to the tooth. Begg brackets were placed from the second premolar on one side to the second premolar on the opposite side. 0.016″ × 0.025″ stainless steel was placed in ribbon mode. The ligature wire was placed as a sling shot from the button on the fractured tooth to the two adjacent teeth. 4 mm of extrusion was achieved and there was no evidence of root resorption. Forced extrusion was achieved in four months. The sling shot method is a very effective method of ligation. Light forces are delivered over a long duration with definitive results as compared to the inconsistent force delivery with conventional extrusion mechanics.

The sinonasal communication in the horse: examinations using computerized three-dimensional reformatted renderings of computed-tomography datasets

PubMed Central

2014-01-01

Background Sinusitis is a common disease in the horse. In human medicine it is described, that obstruction of the sinonasal communication plays a major role in the development of sinusitis. To get spatial sense of the equine specific communication ways between the nasal cavity and the paranasal sinuses, heads of 19 horses, aged 2 to 26 years, were analyzed using three-dimensional (3D) reformatted renderings of CT-datasets. Three-dimensional models were generated following manual and semi-automated segmentation. Before segmentation, the two-dimensional (2D) CT-images were verified against corresponding frozen sections of cadaveric heads. Results Three-dimensional analysis of the paranasal sinuses showed the bilateral existence of seven sinus compartments: rostral maxillary sinus, ventral conchal sinus, caudal maxillary sinus, dorsal conchal sinus, frontal sinus, sphenopalatine sinus and middle conchal sinus. The maxillary septum divides these seven compartments into two sinus systems: a rostral paranasal sinus system composed of the rostral maxillary sinus and the ventral conchal sinus and a caudal paranasal sinus system which comprises all other sinuses. The generated 3D models revealed a typically configuration of the sinonasal communication ways. The sinonasal communication started within the middle nasal meatus at the nasomaxillary aperture (Apertura nasomaxillaris), which opens in a common sinonasal channel (Canalis sinunasalis communis). This common sinonasal channel ramifies into a rostral sinonasal channel (Canalis sinunasalis rostralis) and a caudo-lateral sinonasal channel (Canalis sinunasalis caudalis). The rostral sinonasal channel ventilated the rostral paranasal sinus system, the caudo-lateral sinonasal channel opened into the caudal paranasal sinus system. The rostral sinonasal channel was connected to the rostral paranasal sinuses in various ways. Whereas, the caudal channel showed less anatomical variations and was in all cases connected to the caudal maxillary sinus. Volumetric measurements of the sinonasal channels showed no statistically significant differences (P <0.05) between the right and left side of the head. Conclusions Under physiologic conditions both paranasal sinus systems are connected to the nasal cavity by equine specific sinonasal channels. To resolve sinus disease it is aimed to maintain or even reconstruct the normal anatomy of the sinonasal communication by surgical intervention. Therefore, the presented 3D analyses may provide a useful basis. PMID:24646003

Iterations of computer- and template assisted mandibular or maxillary reconstruction with free flaps containing the lateral scapular border--Evolution of a biplanar plug-on cutting guide.

PubMed

Cornelius, Carl-Peter; Giessler, Goetz Andreas; Wilde, Frank; Metzger, Marc Christian; Mast, Gerson; Probst, Florian Andreas

2016-03-01

Computer-assisted planning and intraoperative implementation using templates have become appreciated modalities in craniofacial reconstruction with fibula and DCIA flaps due to saving in operation time, improved accuracy of osteotomies and easy insetting. Up to now, a similar development for flaps from the subscapular vascular system, namely the lateral scapular border and tip, has not been addressed in the literature. A cohort of 12 patients who underwent mandibular (n = 10) or maxillary (n = 2) reconstruction with free flaps containing the lateral scapular border and tip using computer-assisted planning, stereolithography (STL) models and selective laser sintered (SLS) templates for bone contouring and sub-segmentation osteotomies was reviewed focussing on iterations in the design of computer generated tools and templates. The technical evolution migrated from hybrid STL models over SLS templates for cut out as well as sub-segmentation with a uniplanar framework to plug-on tandem template assemblies providing a biplanar access for the in toto cut out from the posterior aspect in succession with contouring into sub-segments from the medial side. The latest design version is the proof of concept that virtual planning of bone flaps from the lateral scapular border can be successfully transferred into surgery by appropriate templates. Copyright © 2015 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

External root resorption after orthodontic treatment: a study of contributing factors

PubMed Central

Jung, Yun-Hoa

2011-01-01

Purpose The purpose of this study was to examine the patient- and treatment-related etiologic factors of external root resorption. Materials and Methods This study consisted of 163 patients who had completed orthodontic treatments and taken the pre- and post-treatment panoramic and lateral cephalometric radiographs. The length of tooth was measured from the tooth apex to the incisal edge or cusp tip on the panoramic radiograph. Overbite and overjet were measured from the pre- and post-treatment lateral cephalometric radiographs. The root resorption of each tooth and the factors of malocclusion were analyzed with an analysis of variance. A paired t test was performed to compare the mean amount of root resorption between male and female, between extraction and non-extraction cases, and between surgery and non-surgery groups. Correlation coefficients were measured to assess the relationship between the amount of root resorption and the age in which the orthodontic treatment started, the degree of changes in overbite and overjet, and the duration of treatment. Results Maxillary central incisor was the most resorbed tooth, followed by the maxillary lateral incisor, the mandibular central incisor, and the mandibular lateral incisor. The history of tooth extraction was significantly associated with the root resorption. The duration of orthodontic treatment was positively correlated with the amount of root resorption. Conclusion These findings show that orthodontic treatment should be carefully performed in patients who need the treatment for a long period and with a pre-treatment extraction of teeth. PMID:21977469

External root resorption after orthodontic treatment: a study of contributing factors.

PubMed

Jung, Yun-Hoa; Cho, Bong-Hae

2011-03-01

The purpose of this study was to examine the patient- and treatment-related etiologic factors of external root resorption. This study consisted of 163 patients who had completed orthodontic treatments and taken the pre- and post-treatment panoramic and lateral cephalometric radiographs. The length of tooth was measured from the tooth apex to the incisal edge or cusp tip on the panoramic radiograph. Overbite and overjet were measured from the pre- and post-treatment lateral cephalometric radiographs. The root resorption of each tooth and the factors of malocclusion were analyzed with an analysis of variance. A paired t test was performed to compare the mean amount of root resorption between male and female, between extraction and non-extraction cases, and between surgery and non-surgery groups. Correlation coefficients were measured to assess the relationship between the amount of root resorption and the age in which the orthodontic treatment started, the degree of changes in overbite and overjet, and the duration of treatment. Maxillary central incisor was the most resorbed tooth, followed by the maxillary lateral incisor, the mandibular central incisor, and the mandibular lateral incisor. The history of tooth extraction was significantly associated with the root resorption. The duration of orthodontic treatment was positively correlated with the amount of root resorption. These findings show that orthodontic treatment should be carefully performed in patients who need the treatment for a long period and with a pre-treatment extraction of teeth.

Inflammatory fibrous hyperplasia treated with a modified vestibuloplasty: a case report.

PubMed

Jaimes, Miguel; Muñante, Jose; Olate, Sergio; Rodriguez-Chessa, Jaime Giuseppe; de Albergaria-Barbosa, Jose Ricardo; Mazzonetto, Renato; Klüppel, Leandro Eduardo

2008-03-01

The purpose of this report is to present a case of surgical and prosthetic treatment of a woman with inflammatory fibrous hyperplasia (IFH) and her evaluation during a six month period. IFH is a benign pathology, prevalent in female patients, and principally associated with ill-fitting prosthetic devices in need of adjustment. It is common for patients to require surgical removal of the hyperplastic tissue and fabrication of a new prosthesis. A 55-year-old female with a history of smoking presented with a chief complaint of missing the scheduled adjustment of her maxillary complete denture and the presence of moveable tissue under the denture. Surgical excision of the hyperplastic tissue followed with fixation of the prosthesis for six months to guide the healing of the soft tissue and to reshape the contours of the maxillary supporting tissues. Surgical removal of hyperplasic soft tissue is a routine procedure, and the fixation of the prosthesis for the support of tissue during healing improves intraoral conditions for the fabrication of a new prosthesis in the future.

Long-term skeletal stability after maxillary advancement with distraction osteogenesis in nongrowing patients.

PubMed

Kanno, Takahiro; Mitsugi, Masaharu; Hosoe, Michi; Sukegawa, Shintaro; Yamauchi, Kensuke; Furuki, Yoshihiko

2008-09-01

We assessed the long-term skeletal stability of the repositioned maxilla, midface in patients who underwent maxillary advancement using distraction osteogenesis (DO). The study included 19 nongrowing patients with maxillary hypoplasia with a Class III relationship, a normally developed mandible, and follow-up after DO exceeding 2 years. Eleven men and 8 women participated, with a mean age at treatment of 20.7 years (range 15.4-33.4 years). Twelve patients had midfacial hypoplasia associated with a cleft lip and palate (CLP), and 7 patients had developed noncleft-related hypoplasia. The surgical treatment included our modified Le Fort I osteotomy in combination with intraoral (5 cases) or extraoral (14 cases) distraction devices. Distraction was started after a latency period of 5 to 7 days and continued until the proper convexity was obtained. After active distraction, a 3- to 4-week period of retention was allowed, followed by rigid internal fixation (IF) with or without distractor removal. Lateral cephalometric films before midfacial distraction (T0), after IF with or without distractor removal (T1), 6 months after T1 (T2), and 2 or more years (mean 2.8 years) after T1 (T3) were analyzed. The maxillary A-point in the Frankfort horizontal reference plane was used to assess the skeletal changes in the maxillary position (x, y) at each time point (T1-T3). In addition, we analyzed the differences in the devices and techniques. Midfacial DO was successful in all cases, resulting in a mean change obtained at point A of 10.3 mm (8.4 mm horizontally, 4.7 mm inferiorly). Point A underwent a moderate amount of skeletal relapse at T2 [0.4 mm (5%) horizontally and 0.6 mm (13%) superiorly], with a mean of 8% (0.6 mm) horizontally and 19% (1.0 mm) superiorly over the mean 2.8-year (2.0-4.8 years) follow-up. After long-term follow-up, the maxillary advancement with DO was stable in both CLP and non-CLP patients with maxillary hypoplasia. In addition, our original technique using a rigid external device provided the most reliable results in terms of skeletal stability. This retrospective study showed that DO of the maxilla gives a very stable midface, offering a promising treatment alternative for patients with maxillary hypoplasia.

Five-year follow-up of maxillary distraction osteogenesis on the dentofacial structures of children with cleft lip and palate.

PubMed

Gürsoy, Seda; Hukki, Jyri; Hurmerinta, Kirsti

2010-04-01

To determine the long-term outcomes of maxillary distraction osteogenesis (DO) on skeletal and dental structures of growing children with cleft lip and palate. Severe maxillary deficiencies were treated with a rigid external distractor device followed by a consolidation period. Preoperative and postoperative orthodontic treatment lasted a mean of 14 months and 16 months, respectively. The landmarks on standard lateral cephalometric x-rays were digitized and angular and linear measurements were compared by Student's t test to assess the changes before distraction, after distraction, after consolidation, at 1-year follow-up, and at 2-year follow-up. Long-term follow-up (5 years) was interpreted according to mean values because of the small sample size. During DO, the maxilla was horizontally advanced and moved downward as indicated by the significant changes at the SNA and ANB angles (13 degrees) and at maxillary points A, ANS, and PNS. The increase at the divergence between the maxilla and mandible (ANS-PNS/Me-Go) was found to be significant. The mandible (B, Pg, Me) also moved downward (2-4 mm) and backward (Gn) significantly because of mandibular autorotation. The overjet increased (mean increase, 13.7 mm) and the overbite decreased significantly. The advancement of the upper incisors (13.3 mm) and upper molars (12.3 mm) was slightly more than the skeletal points. In a long-term follow-up (5 years), the ANB angle and horizontal overjet continued to decrease but both values remained positive, indicating a Class I relationship. This cephalometric study of young adolescents with cleft lips and palates found great improvement in dentofacial structure after maxillary DO and stability in maxillary skeletal advancement. During a 5-year follow-up, the achieved dentoskeletal treatment outcome was partly diminished. The extreme need for maxillary advancement or facial correction because of psychosocial stress and providing an easier approach for finalizing osteotomy are the major 2 indications for DO treatment. 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Changes consequent to maxillary molar distalization with the bone-anchored pendulum appliance

PubMed Central

Cambiano, Aldo Otazú; Janson, Guilherme; Fuziy, Acácio; Garib, Daniela Gamba; Lorenzoni, Diego Coelho

2017-01-01

OBJECTIVES: This retrospective study aimed to evaluate the dentoalveolar, skeletal, and soft tissue effects obtained with bone-anchored pendulum appliance in patients with Class II malocclusion. MATERIALS AND METHODS: A total of 18 patients (4 male, 14 female) at a mean pretreatment age of 14.0 years (+1.08) were enrolled in this study. All patients were treated with the bone-anchored pendulum appliance for an average duration of 4.8 months. Only the active distalization period was evaluated with predistalization and postdistalization lateral cephalograms. Skeletal, dentoalveolar, and soft tissue variables were obtained. Based on these variables, the treatment effects were evaluated with dependent t-test. RESULTS: Correction of Class II molar relationship resulted from distal movement of 3.45 mm and tipping of 11.24° of the first maxillary molars. The premolars were distalized accompanying the molars. CONCLUSIONS: The bone-anchored pendulum appliance proved to be an effective method for distalization of maxillary molars in cases that require maximum anchorage, avoiding reciprocal mesial movement of premolars and incisors. PMID:29119095

Class II malocclusion with accentuated occlusal plane inclination corrected with miniplate: a case report

PubMed Central

Farret, Marcel Marchiori; Farret, Milton M. Benitez

2016-01-01

ABSTRACT Introduction: A canted occlusal plane presents an unesthetic element of the smile. The correction of this asymmetry has been typically considered difficult by orthodontists, as it requires complex mechanics and may sometimes even require orthognathic surgery. Objective: This paper outlines the case of a 29-year-old woman with Class II malocclusion, pronounced midline deviation and accentuated occlusal plane inclination caused by mandibular deciduous molar ankylosis. Methods: The patient was treated with a miniplate used to provide anchorage in order to intrude maxillary teeth and extrude mandibular teeth on one side, thus eliminating asymmetry. Class II was corrected on the left side by means of distalization, anchored in the miniplate as well. On the right side, maxillary first premolar was extracted and molar relationship was kept in Class II, while canines were moved to Class I relationship. The patient received implant-prosthetic rehabilitation for maxillary left lateral incisor and mandibular left second premolar. Results: At the end of treatment, Class II was corrected, midlines were matched and the canted occlusal plane was totally corrected, thereby improving smile function and esthetics. PMID:27409658

Immediate versus conventional loading of implant-supported maxillary overdentures: a finite element stress analysis.

PubMed

Akca, Kivanc; Eser, Atilim; Eckert, Steven; Cavusoglu, Yeliz; Cehreli, Murat Cavit

2013-01-01

To compare biomechanical outcomes of immediately and conventionally loaded bar-retained implant-supported maxillary overdentures using finite element stress analysis. Finite element models were created to replicate the spatial positioning of four 4.1 × 12-mm implants in the completely edentulous maxillae of four cadavers to support bar-retained overdentures with 7-mm distal extension cantilevers. To simulate the bone-implant interface of immediately loaded implants, a contact situation was defined at the interface; conventional loading was simulated by "bonding" the implants to the surrounding bone. The prostheses were loaded with 100 N in the projected molar regions bilaterally, and strain magnitudes were measured at the buccal aspect of bone. The amplitude of axial and lateral strains, the overall strain magnitudes, and the strain magnitudes around anterior and posterior implants in the immediate loading group were comparable to those seen in the conventional loading group, suggesting that the loading regimens created similar stress/strain fields (P > .05). Conventional and immediate loading of maxillary implants supporting bar-retained overdentures resulted in similar bone strains.

Efficiency of molar distalization associated with second and third molar eruption stage.

PubMed

Flores-Mir, Carlos; McGrath, Lisa; Heo, Giseon; Major, Paul W

2013-07-01

To evaluate the efficiency of molar distalization associated with the second and third molar eruption stage. A systematic computerized database search was conducted using several databases. Adaptations of the terms molar distalization and distalizing appliances were used. The reference lists of all the selected articles were also searched for any potential articles that might have been missed in the electronic search. The data provided in the selected publications were grouped and analyzed in terms of molar distalization with respect to various eruption stages of maxillary second and third molars. Out of the 13 initially identified articles only four fulfilled the final selection criteria. Three of the four studies showed no statistical significance in linear molar distalization based on the eruptive stage of the second and/or third molars, while one study found that the amount of distal movement of the first molars was significantly greater in the group with unerupted second molars. Only one study found that the amount of molar tipping that occurred as a result of distalization was related to the eruption stage of the maxillary molars. Similarly, three of the four studies found that molar distalization time was not significantly affected by eruption of the second or third molars. The effect of maxillary second and third molar eruption stage on molar distalization-both linear and angular distalization-appears to be minimal. This conclusion is only based on low-level of evidence clinical trials. The large variability in the outcomes should be considered clinically.

Managing the maxillary partially edentulous patient with extensive anterior tooth loss and advanced periodontal disease using a removable partial denture: a clinical report.

PubMed

Ma, Polly S; Brudvik, James S

2008-10-01

The treatment modality, a continuous occlusal rest removable partial denture, not only restored missing teeth but also stabilized the remaining dentition in a patient with advanced periodontal attachment loss. By engaging the guiding planes at the mesial surfaces of the abutments anteriorly and also the distal surfaces of the abutments posteriorly, the remaining teeth, with varying amounts of mobility, were splinted together by the framework. This conservative treatment option allows flexibility for easy repair during the life span of the prosthesis.

[Three-dimensional finite element analysis of maxillary incisor retraction with step-shaped vertical closing loop].

PubMed

Zhang, Sheng; Mai, Li-xiang; Liu, Cong-hua; Wang, Da-wei

2011-07-01

To investigate the displacement and stress distribution of upper incisors in three-dimensional (3D) space controlled by step-shaped vertical closing loop. The maxillary teeth and alveolar bone of a volunteer with normal occlusion were scanned with 3D spiral CT. Modeling and calculation were only carried out on right upper central incisor, lateral incisor and their alveolar bone in order to simplify the procedures. A 3D finite element model of archwire-brackets-upper incisors and periodontal tissues was developed using Ansys finite element package. Finally, a 3D finite element model of archwire-brackets-upper incisors and periodontal tissues was established based on mirror symmetry principle. The displacement of maxillary incisors and stress distribution in periodontal tissues were analyzed. When step-shaped vertical closing loop was simply drew back 1 mm, the maximum displacement of upper central incisor in labial and lingual direction were 5.29 × 10(-2) and 0.71 × 10(-2) mm; 10.47 × 10(-3) and 10.20 × 10(-3) mm in gingival and occlusal direction, 10.26 × 10(-3) and 1.63 × 10(-3) mm in medial and distal direction; the maximum displacement of upper lateral incisor in labial and lingual direction were 3.31 × 10(-2) and 0.41 × 10(-2) mm, 10.52 × 10(-3) and 5.10 × 10(-3) mm in gingival and occlusal direction, 6.29 × 10(-3) and 4.64 × 10(-3) mm in medial and distal direction, the displacement trend of them were moving lingually and gingivally similar to bodily movement. The stress peach of upper central incisor, periodontal ligament and alveolar bone were 31.35, 2.52 and 4.64 MPa, the stress peach of upper lateral incisor, periodontal ligament and alveolar bone were 19.59, 1.28 and 4.12 Mpa, the stress distribution of them were similar and the periodontal ligament buffered the stress imposed on the tooth.

Gait and posture analysis in patients with maxillary transverse discrepancy, before and after RPE.

PubMed

Mason, Martina; Spolaor, Fabiola; Guiotto, Annamaria; De Stefani, Alberto; Gracco, Antonio; Sawacha, Zimi

2018-03-01

The purpose of this study was to evaluate the effects of the rapid palatal expansion (RPE) on posture and gait analysis in subjects with maxillary transverse discrepancies. Forty-one patients between 6 and 12 years were divided into 3 groups: 10 control subjects (Cs), 16 patients with unilateral posterior crossbite (CbMono), 15 patients with maxillary transverse discrepancy and no crossbite (Nocb). Every subject underwent gait analysis and posturographic examination in order to evaluate the presence of balance alterations before (T0) and after (T4) RPE application. The examinations were performed through a six-cameras stereophotogrammetric system (60-120Hz, BTS S.p.A.) synchronized with two force plates (FP4060, Bertec Corp.). Romberg test was performed on a force plate, and the statokinesiogram and joint kinematics were evaluated. One-way Anova was performed among the variables after evidence of normal distribution (Levene's test for equality of variances) and Kruskal-Wallis test (P<0.05), in order to compare the three groups of subjects. While paired t-test was performed, or Kruskal-Wallis test, instead when comparing pre- and post-RPE application within the same group of subjects (P<0.05). Tamane T2 or Bonferroni correction was applied where needed. The posturographic analysis reveal significant differences across the 3 population: 95% power frequency in medio-lateral and antero-posterior direction in T0, median frequency in medio-lateral direction in T0, mean power frequency in medio-lateral direction in T0. Significant differences were also registered in the three-dimensional joints kinematics variables, mainly between Cs and Cbmono in T0 and T4 and between Cbmono and Nocb in T4. A detectable correlation between dental occlusion and body posture is shown in this study that confirms another benefit of the RPE. This was mainly revealed in the dynamic posture where modifications at the mandibular level affect the whole body. Copyright © 2018. Published by Elsevier Masson SAS.

Sinus floor elevation from a maxillary molar tooth extraction socket in a patient with chronic inflammation.

PubMed

Tözüm, Tolga F; Dursun, Erhan; Tulunoglu, Ibrahim

2009-03-01

The compromised nature of the residual interradicular bone after extraction of periodontally hopeless maxillary molars often requires a sinus elevation procedure to ideally place the implants to accept future prosthesis. Maxillary sinus elevation surgery is a procedure used to increase the volume of bone mass so that dental implants can be placed. This article documents a sinus floor elevation technique through an extraction socket in a 65-year-old white male with chronic inflammation to increase the bone mass after the extraction of a periodontally involved maxillary molar tooth. Computerized tomography revealed an increased thickness of the sinus membrane, which was attributed to possible chronic sinus inflammation and periodontal inflammation. After consultation with the Department of Otolaryngology, it was diagnosed as chronic inflammation without any contraindication for sinus elevation surgery or implant placement. One month after the extraction, the sinus floor elevation surgery was performed through the extraction socket, and implants were placed 4 months later. An uneventful healing was noted after 6 months of osseointegration; two porcelain-fused-to-metal crowns were fabricated. Clinical follow-up took place every 3 months for 3 years, and successful healing was achieved. The patient was satisfied with the esthetic and functional results of the oral rehabilitation. Sinus floor elevation through an extraction socket without any residual bone, followed by dental implant placement, provided successful functional results and acceptable stability.

Maxillary distraction osteogenesis in cleft lip and palate cases with midface hypoplasia using rigid external distractor: an alternative technique.

PubMed

Dua, Gaurav; Navin Kumar, Andrews; Roy, Indranil Deb; Roy, Supriyo Kumar

2014-05-01

Patients with operated cleft lip and palate present with a problem of midface hypoplasia, and such patients have been traditionally treated with orthognathic surgery. Such a procedure has its own limitations of relapse and hence a newer modality of distraction osteogenesis with histiogenesis can be chosen to overcome such limitations for midfacial advancement. The purpose of this study is to evaluate an alternative technique and its postoperative stability in maxillary distraction osteogenesis in patients of cleft lip and cleft palate using a rigid external device (RED). Nine patients with midface bone stock deficiency were selected for maxillary advancement. At the first surgery under general anesthesia, after Le Fort I osteotomy, RED system was used with the alternative technique. After distraction, evaluation was done for ease of the procedure, stability, and complications. Lateral cephalograms were evaluated at 3 stages: T1, pre-distraction; T2, post-distraction; and T3, 1 year post-distraction. A mean 13.4-mm midface advancement was shown with bone formation at the pterygomaxillary region without losing the vector and having a standby mode in case the wire broke during distraction The results were stable even at 1 year of follow-up. Maxillary position improved in relation to the cranial base. This study showed that the RED was versatile in midface advancement.

Treatment outcome and long-term stability of skeletal changes following maxillary distraction in adult subjects of cleft lip and palate

PubMed Central

Singh, Satinder Pal; Jena, Ashok Kumar; Rattan, Vidya; Utreja, Ashok Kumar

2012-01-01

Aim: To evaluate the treatment outcome and long-term stability of skeletal changes following maxillary advancement with distraction osteogenesis in adult subjects of cleft lip and palate. Materials and Methods: Total 12 North Indian adult patients in the age range of 17-34 years with cleft lip and palate underwent advancement of maxilla by distraction osteogenesis. Lateral cephalograms recorded prior to distraction, at the end of distraction, 6 months after distraction, and at least 24 months (mean 25.5 ± 1.94 months) after distraction osteogenesis were used for the evaluation of treatment outcome and long-term stability of the skeletal changes. Descriptive analysis, ANOVA, and post-hoc test were used, and P-value 0.05 was considered as a statistically significant level. Results: Maxillary distraction resulted in significant advancement of maxilla (P<0.001). Counterclockwise rotation of the palatal plane took place after maxillary distraction. The position of the mandible and facial heights were stable during distraction. During the first 6 months of the post-distraction period, the maxilla showed relapse of approximately 30%. However, after 6 months post distraction, the relapse was very negligible. Conclusions: Successful advancement of maxilla was achieved by distraction osteogenesis in adult subjects with cleft lip and palate. Most of the relapse occurred during the first 6 months of post-distraction period, and after that the outcomes were stable. PMID:22919221

Treatment outcome and long-term stability of skeletal changes following maxillary distraction in adult subjects of cleft lip and palate.

PubMed

Singh, Satinder Pal; Jena, Ashok Kumar; Rattan, Vidya; Utreja, Ashok Kumar

2012-04-01

To evaluate the treatment outcome and long-term stability of skeletal changes following maxillary advancement with distraction osteogenesis in adult subjects of cleft lip and palate. Total 12 North Indian adult patients in the age range of 17-34 years with cleft lip and palate underwent advancement of maxilla by distraction osteogenesis. Lateral cephalograms recorded prior to distraction, at the end of distraction, 6 months after distraction, and at least 24 months (mean 25.5 ± 1.94 months) after distraction osteogenesis were used for the evaluation of treatment outcome and long-term stability of the skeletal changes. Descriptive analysis, ANOVA, and post-hoc test were used, and P-value 0.05 was considered as a statistically significant level. Maxillary distraction resulted in significant advancement of maxilla (P<0.001). Counterclockwise rotation of the palatal plane took place after maxillary distraction. The position of the mandible and facial heights were stable during distraction. During the first 6 months of the post-distraction period, the maxilla showed relapse of approximately 30%. However, after 6 months post distraction, the relapse was very negligible. Successful advancement of maxilla was achieved by distraction osteogenesis in adult subjects with cleft lip and palate. Most of the relapse occurred during the first 6 months of post-distraction period, and after that the outcomes were stable.

The effects of micro-implant assisted rapid palatal expansion (MARPE) on the nasomaxillary complex--a finite element method (FEM) analysis.

PubMed

MacGinnis, Matt; Chu, Howard; Youssef, George; Wu, Kimberley W; Machado, Andre Wilson; Moon, Won

2014-08-29

Orthodontic palatal expansion appliances have been widely used with satisfactory and, most often, predictable clinical results. Recently, clinicians have successfully utilized micro-implants with palatal expander designs to work as anchors to the palate to achieve more efficient skeletal expansion and to decrease undesired dental effects. The purpose of the study was to use finite element method (FEM) to determine the stress distribution and displacement within the craniofacial complex when simulated conventional and micro-implant-assisted rapid palatal expansion (MARPE) expansion forces are applied to the maxilla. The simulated stress distribution produced within the palate and maxillary buttresses in addition to the displacement and rotation of the maxilla could then be analyzed to determine if micro-implants aid in skeletal expansion. A three-dimensional (3D) mesh model of the cranium with associated maxillary sutures was developed using computed tomography (CT) images and Mimics modeling software. To compare transverse expansion stresses in rapid palatal expansion (RPE) and MARPE, expansion forces were distributed to differing points on the maxilla and evaluated with ANSYS simulation software. The stresses distributed from forces applied to the maxillary teeth are distributed mainly along the trajectories of the three maxillary buttresses. In comparison, the MARPE showed tension and compression directed to the palate, while showing less rotation, and tipping of the maxillary complex. In addition, the conventional hyrax displayed a rotation of the maxilla around the teeth as opposed to the midpalatal suture of the MARPE. This data suggests that the MARPE causes the maxilla to bend laterally, while preventing unwanted rotation of the complex. In conclusion, the MARPE may be beneficial for hyperdivergent patients, or those that have already experienced closure of the midpalatal suture, who require palatal expansion and would worsen from buccal tipping of the teeth or maxillary complex.

Gingival Zenith Positions and Levels of Maxillary Anterior Dentition in Cases of Bimaxillary Protrusion: A Morphometric Analysis.

PubMed

Gowd, Snigdha; Shankar, T; Chatterjee, Suravi; Mohanty, Pritam; Sahoo, Nivedita; Baratam, Srinivas

2017-08-01

To investigate the two clinical parameters, such as gingival zenith positions (GZPs) and gingival zenith levels (GZLs), of maxillary anterior dentition in bimaxillary protrusion cases and collate it with severiety of crown inclination. Gingival zenith position and GZL in 40 healthy patients (29 females and 11 males) with an average age of 21.5 years were assessed. Inclusion criteria involved absence of periodontal diseases, Angle's class I molar relationship, and upper anterior proclination within 25 to 45° based on Steiner's analysis; exclusion criteria included spacing, crowding, anterior restoration and teeth with incisor attrition or rotation. The GZP was evaluated using digital calipers from voxel-based morphometry (VBM), and GZL was assessed from the tangent drawn from GZP of central incisor and canines to the linear vertical distance of GZP of lateral incisor. All the central incisors showed a GZP distal to VBM with a mean average of 1 mm. Severe proclination between 40 and 45° showed a statistically significant variation. Lateral incisors displayed a mean of 0.5 mm deviation of GZP from the vertically bisected midline. In 80% of canine population, GZP was centralized. We conclude that the degree of proclination of maxillary anterior dentition was correlated to the gingival contour in bimaxillary cases. The investigation revealed that there is a variation in the location of GZP as the severity of proclination increases. This study highlights the importance of microesthetics in fixed orthodontic treatment. The gingival contour should be unaltered while retraction during management of bimaxillary protrusion.

Maxillary "All-On-Four" treatment using zygomatic implants. A mechanical analysis.

PubMed

de Moraes, P H; Olate, S; Nóbilo, M de Arruda; Asprino, L; de Moraes, M; Barbosa, J de Albergaría

2016-04-01

Zygomatic implants may be used for dental rehabilitation in atrophic maxillae. The aim of this study was to establish experimentally the areas of stress distribution using 2 kinds of "All-On-Four" maxillary procedures. The best position to insert the implants was selected using polyurethane craniomaxillary models and surgical guides were made. Group 1 was designed with two posterior zygomatic implants and two conventional anterior implants, and group 2 with two posterior zygomatic implants and two anterior zygomatic implants. A titanium bar was built to link the 4 implants in both groups. Photoelastic replicas of these models were made and the implants were inserted using the surgical guides. An Instrom 4411 testing machine was used to perform a unilateral compressive loading at the level of the right first molar until 2mm of displacement was obtained. Group 1 showed a high strain concentration in the right lateral orbital region at the level of the apex of the zygomatic implant. Less strain was noticed at the apical levels of the conventional implants in the anterior sector and of the contralateral zygomatic implant. Group 2 showed high strains in the lateral inferior orbital area. The load was low in the alveolar bone sector. Zygomatic bone and paranasal structures are loaded at high levels when zygomatic implants are used to stabilize a full maxillary prosthodontic rehabilitation on 4 implants. The use of 4 zygomatic implants loads the alveolar bone to a lower extent and seems better suited from a mechanical point of view than the use of 2 zygomatic implants. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

Assessment of gingival symmetry with digital measuring tools and its reproducibility.

PubMed

Wilson, David; Soileau, Kristi; Esquivel, Jonathan; Cordero, Adriana; Buchman, Wes; Maney, Pooja; Archontia Palaiologou, A

The aim of this study was to investigate the accuracy of digital measuring tools to measure the position of gingival zeniths and to assess its reproducibility between different examiners. A total of 108 subjects were photographed at the Louisiana State University School of Dentistry. The settings, positioning of the digital camera, and subjects' Frankfurt levels were standardized. A photograph was taken of the six anterior maxillary teeth of each subject, and their corresponding free gingival margins. Digital caliper measurements were taken intraorally from the zenith to the incisal edge of the right maxillary central incisor. A reference line was drawn across the screen on each image at the level of the zenith of tooth 8. Three calibrated examiners then measured the distance from the reference line to the zeniths of the other five anterior maxillary teeth. There was no statistically significant difference between the examiners regarding any of the measurements. Central incisors were at the same level in 84.24% of the subjects, and lateral incisors were within 0.5 mm of central incisors in only 58% of the subjects. Canine zeniths were within 0.5 mm of each other in 43% of the subjects. Only 28% of the subjects presented with zeniths of tooth 6 to tooth 11 within 0.5 mm of each other. Lateral incisors were at or beneath the line drawn from central incisors to cuspids in 90.8% of the subjects. Standardized digital photography taken with the aid of a stadiometer and used to evaluate esthetic parameters allowed for reproducible measurements.

Computed tomographic and radiographic examination of dental structures in South American camelid specimen of different ages.

PubMed

Rostami, Abdolrazagh; Geissbühler, Urs; Schellenberger, Frank; Zanolari, Patrik

2014-01-06

Tooth root problems and periodontal diseases are common in South American camelids (SAC). The objective was to evaluate and optimize the imaging technique for dental radiography in SAC and to describe the radiographic and computed tomographic (CT) anatomy of normal teeth at different ages. In this study, the heads of 20 healthy SAC slaughtered for meat production or euthanized for reasons not related to dental problems included 7 female and 10 male llamas and 3 male alpacas. Using a standardized protocol, radiographs and CT scans of the 20 specimen were performed. The most useful radiographic projections for mandibular and maxillary cheek teeth evaluation turned out to be lateral30°ventral-laterodorsal and lateral30°dorsal-lateroventral with slight separation of the dental arcades respectively. Digital radiographic and CT appearance of the mandibular and maxillary teeth were described from the beginning of mineralization till maturity. In addition the normal range of the CT radio density of different cheek teeth and different dental tissues were measured. Hounsfield units of different dental tissues of SAC turned out to be similar to equids. Deviation, shortening and partial destruction of the distal tooth root of mandibular 09's and 10's and of maxillary 09's was observed and the existence of a common pulp chamber in younger teeth was revealed. The present study provides information about the dental imaging morphology in clinically healthy SAC. This basic information provides fundamental knowledge for evaluating images and planning treatments in clinically affected animals.

Computed tomographic and radiographic examination of dental structures in South American camelid specimen of different ages

PubMed Central

2014-01-01

Background Tooth root problems and periodontal diseases are common in South American camelids (SAC). The objective was to evaluate and optimize the imaging technique for dental radiography in SAC and to describe the radiographic and computed tomographic (CT) anatomy of normal teeth at different ages. In this study, the heads of 20 healthy SAC slaughtered for meat production or euthanized for reasons not related to dental problems included 7 female and 10 male llamas and 3 male alpacas. Using a standardized protocol, radiographs and CT scans of the 20 specimen were performed. Results The most useful radiographic projections for mandibular and maxillary cheek teeth evaluation turned out to be lateral30°ventral - laterodorsal and lateral30°dorsal - lateroventral with slight separation of the dental arcades respectively. Digital radiographic and CT appearance of the mandibular and maxillary teeth were described from the beginning of mineralization till maturity. In addition the normal range of the CT radio density of different cheek teeth and different dental tissues were measured. Hounsfield units of different dental tissues of SAC turned out to be similar to equids. Deviation, shortening and partial destruction of the distal tooth root of mandibular 09′s and 10′s and of maxillary 09′s was observed and the existence of a common pulp chamber in younger teeth was revealed. Conclusions The present study provides information about the dental imaging morphology in clinically healthy SAC. This basic information provides fundamental knowledge for evaluating images and planning treatments in clinically affected animals. PMID:24393365

The Evaluation of Root Fracture with Cone Beam Computed Tomography (CBCT): An Epidemiological Study.

PubMed

Doğan, Mehmet-Sinan; Callea, Michele; Kusdhany, Lindawati S; Aras, Ahmet; Maharani, Diah-Ayu; Mandasari, Masita; Adiatman, Melissa; Yavuz, Izzet

2018-01-01

The aim of this study was evaluation of the cone-beam computed tomography (CBCT) image of 50 patients at the ages of 8-15 suspecting root fracture and root fracture occurred, exposed to dental traumatic. In additionally, this study was showed effect of crown fracture on root fracture healing. All of the individuals included in the study were obtained images with the cone-beam computed tomography range of 0,3 voxel and 8.9 seconds.(i-CAT®, Model 17-19, Imaging SciencesInternational, Hatfield, Pa USA).The information obtained from the history and CBCT images of patients were evaluated using chi-square test statistical method the mean and the distribution of the independent variables. 50 children, have been exposed to trauma, was detected root fracture injury in 97 teeth. Horizontal root fracture 63.9% of the 97 tooth, the oblique in 31.9%, both the horizontal and oblique in 1.03%, partial fracture in 2.06% ,and both horizontally and vertical in 1.03% was observed.The most affected teeth, respectively of, are the maxillary central incisor (41.23% left, right, 37.11%), maxillary left lateral incisor (9.27%), maxillary right lateral incisor (11.34%), and mandibular central incisor (1.03%). Crown fractures have negative effects on spontaneous healing of root fractures. CBCT are used selected as an alternative to with conventional radiography for diagnosis of root fractures. In particular, ıt's cross-sectional image is quite useful and has been provided more conveniences seeing the results of diagnosis and treatment for clinician. Key words: Root fracture, CBCT, Epidemiolog.

Prevalence of shovel-shaped incisors in Saudi Arabian dental patients.

PubMed

Saini, T S; Kharat, D U; Mokeem, S

1990-10-01

The prevalence of maxillary incisor shoveling was studied radiographically in 990 Saudi patients. According to the radiomorphologic characteristics, a new classification was developed and shovel teeth were categorized. The findings of this study showed 9% shovel-shaped incisors; among those, 4% were central incisors and 5% were lateral incisors. Frequency of dens invaginatus occurrence with the shovel-shaped incisors was also investigated. Eight percent of shovel-shaped incisors showed presence of dens invaginatus. Prevalence was found to be 4% in central shovel-shaped incisors, whereas that in lateral shovel-shaped incisors was 11%.

Evaluation of skeletal maturity using maxillary canine, mandibular second and third molar calcification stages.

PubMed

Trakinienė, Giedrė; Smailienė, Dalia; Kučiauskienė, Ainė

2016-08-01

The objective of this study was to evaluate whether the calcification stages of maxillary canine, mandibular second molar, and mandibular third molar can be used for assessment of growth phase. The study group consisted of 274 subjects. Pre-treatment digital panoramic and lateral cephalometric radiographs of the patients were analysed. The patients' age was ranging from 7 to 19 years. Right maxillary canine, mandibular second molar and third molar were used as a sample. The teeth mineralization was assessed using modification of Gleiser and Hunt method. The skeletal maturation was assessed by the cervical vertebrae maturation (CVM) method. A significant association was found between CVM stage 2 and maxillary canine (UC) stage 4, mandibular second molar (LM2) stage 4, and mandibular third molar (LM3) stage 1. CVM stage 3 corresponded with UC stage 5, LM2 stage 5, LM3 stage 2. CVM stage 4 matched with UC stage 5, LM2 stage 6 and LM3 stage 3. The highest correlations between CVM and calcification stages were in the group of the maxillary canine (r = 0.812, P < 0.01) and mandibular second molar (r = 0.824, P < 0.01). Limitation of our study was that the study sample was not very big and the distribution value in the groups was very high, so it was impossible to check more statistical parameters. The calcification stages of UC, LM2, and LM3 as indicators of skeletal maturity could be clinically used with caution, until this method is verified with a larger sample group. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

A Retrospective Analysis of Dental Implants Replacing Failed Implants in Grafted Maxillary Sinus: A Case Series.

PubMed

Manor, Yifat; Chaushu, Gavriel; Lorean, Adi; Mijiritzky, Eithan

2015-01-01

To evaluate the survival rate of dental implants replacing failed implants in grafted maxillary sinuses using the lateral approach vs nongrafted posterior maxillae. A retrospective analysis was conducted to study the survival of secondary dental implants inserted in the posterior maxilla in previously failed implant sites between the years 2000 and 2010. The study group consisted of patients who had also undergone maxillary sinus augmentation, and the control group consisted of patients in whom implants in the posterior maxilla had failed. Clinical and demographic data were analyzed using a structured form. Seventy-five patients with a total of 75 replaced implants were included in the study. The study group comprised 40 patients and the control group, 35 patients. None of the replaced implants in the study group failed, resulting in an overall survival of 100%; three replaced implants in the control group failed (92% survival). The main reason for the primary implant removal was lack of osseointegration (35 [87.5%] of 40 study group implants and 23 [65.7%] of 35 control group implants [P = .027]). The difference between the groups with regard to the timing of primary implant failure was statistically significant. The study group had more early failures of the primary implant than did the control group (77% vs 62%; P = .038). Dental implants replaced in the posterior maxilla had a high survival rate. A higher rate of survival was found in augmented maxillary sinus sites. Within the limits of the present study, it can be concluded that previous implant failures in the grafted maxillary sinus should not discourage practitioners from a second attempt.

Stable region for maxillary dental cast superimposition in adults, studied with the aid of stable miniscrews.

PubMed

Chen, G; Chen, S; Zhang, X Y; Jiang, R P; Liu, Y; Shi, F H; Xu, T M

2011-05-01

To identify a stable and reproducible reference region to superimpose serial maxillary dental models in adult extraction cases. Fifteen adult volunteers were enrolled. To reduce protrusion, bilateral maxillary first premolars were extracted in all volunteers. Each volunteer received six miniscrews, including two loaded miniscrews used to retract anterior teeth and four unloaded miniscrews. Impressions for maxillary models were taken at T1 (1 week after miniscrew placement) and T2 (17 months later). Dental models were created and then scanned using a laser scanner. Stability of the miniscrews was evaluated, and dental models were registered using stationary miniscrews. The palatal region, where deviation was within 0.5 mm in all subjects, was determined to be the stable region. Reproducibility of the new palatal region for 3D digital model superimposition was evaluated. Deviation of the medial 2/3 of the palatal region between the third rugae and the line in contact with the distal surface of the bilateral maxillary first molars was within 0.5 mm. Tooth movement of 15 subjects was measured to evaluate the validity of the new 3D superimposition method. Displacements were 8.18 ± 2.94 mm (central incisor) and 2.25 ± 0.73 mm (first molar) measured by miniscrew superimposition, while values of 7.81 ± 2.53 mm (central incisor) and 2.29 ± 1.03 mm (first molar) were measured using the 3D palatal vault regional superimposition method; no significant difference was observed. The medial 2/3 of the third rugae and the regional palatal vault dorsal to it is a stable region to register 3D digital models for evaluation of orthodontic tooth movement in adult patients. © 2011 John Wiley & Sons A/S.

External apical root resorption in maxillary incisors in orthodontic patients: associated factors and radiographic evaluation

PubMed Central

Patanaporn, Virush; Janhom, Apirum; Korwanich, Narumanus

2012-01-01

Purpose This study was performed to evaluate the incidence and degree of external apical root resorption of maxillary incisors after orthodontic treatment and to evaluate particular associated factors related to external apical root resorption. Materials and Methods The records and maxillary incisor periapical radiographs of 181 patients were investigated. Crown and root lengths were measured and compared on the pre- and post-treatment periapical radiographs. Crown length was measured from the center of the incisal edge to the midpoint of the cemento-enamel junction (CEJ). Root length was measured from the CEJ midpoint to the root apex. A correction factor for the enlargement difference was used to calculate root resorption. Results The periapical radiographs of 564 teeth showed that the average root resorption was 1.39±1.27 (8.24±7.22%) and 1.69±1.14 mm (10.16±6.78%) for the maxillary central and lateral incisors, respectively. The results showed that the dilacerated or pointed roots, maxillary premolar extraction cases, and treatment duration were highly significant factors for root resorption (p<0.001). Allergic condition was a significant factor at p<0.01. Age at the start of treatment, large overjet, and history of facial trauma were also factors significantly associated with root resorption (p<0.05). There was no statistically significant difference in root resorption among the factors of gender, overbite, tongue-thrusting habit, types of malocclusion, and types of bracket. Conclusion These results suggested that orthodontic treatment should be carefully performed in pre-treatment extraction patients who have pointed or dilacerated roots and need long treatment duration. PMID:23071964

Maxillary distraction osteogenesis at Le Fort-I level induces bone apposition at infraorbital rim.

PubMed

Rattan, Vidya; Jena, Ashok Kumar; Singh, Satinder Pal; Utreja, Ashok Kumar

2014-09-01

The aim of this study is to evaluate whether there is any remodeling of bone at infraorbital rim following maxillary distraction osteogenesis (DO) at Le Fort-I level. Twelve adult subjects in the age range of 17-21 years with complete unilateral cleft lip and palate underwent advancement of the maxilla by DO. The effect of maxillary DO on the infraorbital rim remodeling was evaluated from lateral cephalograms recorded prior to the DO (T0), at the end of DO (T1), and at least 2-years after the DO (T2) by Walker's analysis. The ANOVA and two-tailed t test were used and probability value (P value) 0.05 was considered as statistically significant level. There was anterior movement of maxilla by 9.22 ± 3.27 mm and 7.67 ± 3.99 mm at the end of immediate (T1) and long-term (T2) follow-up of maxillary DO, respectively. The Walker's analysis showed 1.49 ± 1.22 mm and 2.31 ± 1.81 mm anterior movement of the infraorbital margin (Orbitale point) at the end of T1 and T2, respectively (P < 0.01). This apposition of bone at the infraorbital rim region further improved the facial profile of these patients. The advancement of maxilla by distraction osteogenesis at Le Fort-I level induced significant bone apposition at infraorbital rim. Patients with mild midface hypoplasia who would otherwise may be candidates for osteotomy at Le Fort-II or Le Fort-III level may benefit from maxillary distraction at Le Fort-I level.

Smile esthetics: Impact of variations in the vertical and horizontal dimensions of the maxillary lateral incisors

PubMed Central

Al Taki, Amjad; Hamdan, Ahmad Mohammad; Mustafa, Ziad; Hassan, Mawada; Abu-Alhuda, Sami

2017-01-01

Objective: The purpose of this study was to determine the perception of trained dental professionals and laypersons toward the esthetic impact of variations in the vertical position, width, and gingival height of the maxillary lateral incisor. Materials and Methods: The present study analyzed the perspective of smile photographs by dental professionals such as “fifty orthodontics and fifty general dental practitioners (GDPs)” as well as fifty laypersons, consisting of an equal number of male and female participants. Photographs edited to depict alteration of golden proportion, incisal length, and gingival height of lateral incisor. SPSS software was used to analyze the data and determine the significant difference within all the participants, at 0.05% level (95% confidence interval). Results: There was no significant difference in ranking between the genders. Golden proportion of 62%–67% were ranked the highest by orthodontists, whereas GDPs and laypersons preferred 67%. Regarding gingival display, corrected height of −0.5 and −1 mm received highest ranking from all the three groups. In case of lateral incisal length, −0.5 mm was ranked highest by laypersons, in contrast to −1 mm by orthodontists and GDPs. Conclusion: Specific differences were observed in the ranking of smile esthetics by health-care professionals and laypersons. Golden proportion of 62% and 67% were ranked the highest by orthodontists, whereas GDPs and laypersons preferred 67%. Corrected gingival height of −0.5 and −1 mm received highest ranking from all the three groups. In case of lateral incisal length, −0.5 mm was ranked highest by laypersons, in contrast to −1 mm by orthodontists and GDPs. PMID:29279680

Four-unit fixed dental prostheses replacing the maxillary incisors supported by two narrow-diameter implants - a five-year case series.

PubMed

Moráguez, Osvaldo; Vailati, Francesca; Grütter, Linda; Sailer, Irena; Belser, Urs C

2017-07-01

(1) To determine the survival rate of 10 four-unit fixed dental prostheses (FDPs) replacing the four maxillary incisors, supported by 20 narrow-diameter implants (NDIs), (2) to assess the incidence of mechanical and biological complications, and (3) to evaluate bone level changes longitudinally after final FDP insertion. Ten patients (six women, four men), mean age 49.4 ± 12.6 years, were treated with a four-unit anterior maxillary FDP (six screw-retained; four cemented). Biological parameters, eventual technical complications, radiographic measurements, and study casts were assessed at 1 (baseline), 3, and 5 years after implant placement. A multilevel logistic regression test was performed on clinical parameters and bone level changes (significance level P < 0.05). The 5-year implant and FDP survival rate was 100%. Mean modified plaque index (mPI) values were 0.03 and 0.02 at 3 and 5 years, significantly lower when compared to mPI (0.11 ± 0.31) at 1 year. Mean modified sulcus bleeding index (mSBI) was 0.08, 0.08, and 0.15 over time. Probing depth (PD) values were 1.57, 1.64, and 2.03 mm. Statistically significant differences were found between 1 vs. 5 year (P = 0.0003) and 3 vs. 5 year (P = 0.001). Keratinized mucosa (3.65 mm) remained stable during observation period. DIB mean values were 2.01 ± 0.34, 2.13 ± 0.13, and 2.17 ± 0.38 mm. Patient satisfaction based on visual analog scale revealed favorable fulfillment of overall treatment and esthetic expectations. Two NDIs supporting a four-unit FDP to replace the four missing maxillary incisors may be considered a predictable treatment modality. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Morphological features of the maxillary incisors roots and relationship with neighbouring anatomical structures: possible implications in endodontic surgery.

PubMed

Taschieri, S; Weinstein, T; Rosano, G; Del Fabbro, M

2012-05-01

The purpose of this study was to investigate the relationship between the root apex of the upper incisors and neighbouring anatomical structures as well as the morphology of the root-end foramen after apicoectomy. Fifty-seven patients requiring endodontic surgical treatment for a maxillary anterior root were enrolled. A preoperative diagnostic computed tomography (CT) scan was analysed to determine: the distance between the anterior wall of the nasopalatine duct and the central (CI-ND) incisor root 4mm from the apex; and the distance between the floor of the nasal cavity and the tip of either the central (CI-NF) or the lateral (LI-NF) incisor root. After apicoectomy, root-end foramen endoscopic pictures were taken in order to characterize their morphology. Fifty-nine central and 26 lateral incisors were evaluated. The average CI-ND was 4.71 ± 1.26 (SD) mm. The average CI-NF was 10.62 ± 2.25 mm. The average LI-NF was 13.05 ± 2.43 mm. The foramen shape after apicoectomy was ovoid to circular in about 90% of cases in both central and lateral incisors. A sound knowledge of the anatomical relationships at the surgical site is essential for the clinician to perform a safe endodontic surgical procedure. Copyright © 2011 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.

Maxillary sinus augmentation with a sonic handpiece for the osteotomy of the lateral window: a clinical report.

PubMed

Geminiani, Alessandro; Papadimitriou, Dimitrios E V; Ercoli, Carlo

2011-11-01

Several techniques have been proposed to manage patients with insufficient bone height for implant placement in the posterior maxilla. The lateral approach to sinus elevation is a successful procedure, with percentages of success close to 100%. Unfortunately, a frequent complication encountered during sinus elevation procedure is perforation of the Schneiderian membrane. In this clinical report, the authors present the application of a diamond coated sonic tip and an air-driven sonic instrument, commonly used in prosthodontics for the preparation of the lateral window osteotomy during sinus augmentation procedures. Copyright © 2011 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

"Redefining smile-a multidisciplinary approach".

PubMed

Manne, Prakash; Zakkula, Srujana; Atla, Jyothi; Muvva, Suresh Babu; Sampath, Anche

2013-07-01

This article presents a case report of a 20 year old female who was very much dissatisfied with her facial appearance and smile.On examination, it was found that there was a Angles class II division 1 malocclusion and a generalised spacing in the anterior teeth, with a retained, deciduous, left maxillary canine and a malposed 15. On radiographic examination, an impacted 18, 23 was noticed. As the part of the treatment plan, the retained deciduous canine and the impacted permanent canine were extracted and an orthodontic correction of the malocclusion was accomplished. The missing canine was planned to be replaced with a fixed partial denture.The short clinical crown height of the abutment teeth was increased by crown lengthening procedures and the pontic space was contoured to receive a ovate pontic by using diode lasers. The missing tooth was restored by using an all ceramic three unit zirconia bridge. This multi-disciplinary approach improved the smile of the patient and it ultimately enhanced her aesthetics and self confidence.

“Redefining Smile-A Multidisciplinary Approach”

PubMed Central

Manne, Prakash; Zakkula, Srujana; Atla, Jyothi; Muvva, Suresh Babu; Sampath, Anche

2013-01-01

This article presents a case report of a 20 year old female who was very much dissatisfied with her facial appearance and smile.On examination, it was found that there was a Angles class II division 1 malocclusion and a generalised spacing in the anterior teeth, with a retained, deciduous, left maxillary canine and a malposed 15. On radiographic examination, an impacted 18, 23 was noticed. As the part of the treatment plan, the retained deciduous canine and the impacted permanent canine were extracted and an orthodontic correction of the malocclusion was accomplished. The missing canine was planned to be replaced with a fixed partial denture.The short clinical crown height of the abutment teeth was increased by crown lengthening procedures and the pontic space was contoured to receive a ovate pontic by using diode lasers. The missing tooth was restored by using an all ceramic three unit zirconia bridge. This multi–disciplinary approach improved the smile of the patient and it ultimately enhanced her aesthetics and self confidence. PMID:23998114

Maxillary Interdental Osteotomies Have Low Morbidity for Alveolar Crestal Bone and Adjacent Teeth: A Cone Beam Computed Tomography-Based Study.

PubMed

Rodrigues, Daniel B; Campos, Paulo S F; Wolford, Larry M; Ignácio, Jaqueline; Gonçalves, João R

2018-02-19

Maxillary segmentation involving interdental osteotomies can have an adverse effect on the interdental crestal bone and adjacent teeth. The purpose of the present study was to evaluate the effect of interdental osteotomies on surrounding osseous and dental structures, including adjacent teeth, using cone beam computed tomography (CBCT), in patients who underwent segmental maxillary osteotomies. The present retrospective cohort study evaluated interdental osteotomy (IDO) sites between the lateral incisors and canines in patients treated with 3-piece Le Fort I osteotomies. CBCT scans were assessed using Kodac Dental Imaging software at specific intervals: T0 (before surgery), T1 (immediately after surgery), and T2 (a minimum of 11 months after surgery). The statistical analysis using a linear regression model was adjusted to compare the variables at the different intervals. Injury to the dental structures was assessed by radiological evidence of dental damage, the requirement for endodontic treatment, or tooth loss. We evaluated 94 IDO sites in 47 patients in the present study. The mean inter-radicular distance at T0 was 2.5 mm. A statistically significant increase was seen in the inter-radicular distance (between T1 and T0) of 0.72 mm, with a reduction of the alveolar bone crest height (between T2 and T0) of 0.19 mm (P < .001) for the group that underwent IDO. A weak correlation was found for this increase in the inter-radicular distance, with changes in the alveolar crest bone height. The potential complications associated with interdental osteotomies such as iatrogenic damage to the tooth structure, the need for endodontic treatment, and tooth loss were not encountered in any patients. We found very low morbidity for the interdental alveolar crest and the integrity of teeth adjacent to interdental osteotomies for patients who underwent maxillary segmentation between the lateral incisors and canines. Copyright © 2018 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

EDAR-induced hypohidrotic ectodermal dysplasia: a clinical study on signs and symptoms in individuals with a heterozygous c.1072C > T mutation

PubMed Central

2014-01-01

Background Mutations in the EDAR-gene cause hypohidrotic ectodermal dysplasia, however, the oral phenotype has been described in a limited number of cases. The aim of the present study was to clinically describe individuals with the c.1072C > T mutation (p. Arg358X) in the EDAR gene with respect to dental signs and saliva secretion, symptoms from other ectodermal structures and to assess orofacial function. Methods Individuals in three families living in Sweden, where some members had a known c.1072C > T mutation in the EDAR gene with an autosomal dominant inheritance (AD), were included in a clinical investigation on oral signs and symptoms and self-reported symptoms from other ectodermal structures (n = 37). Confirmation of the c.1072C > T mutation in the EDAR gene were performed by genomic sequencing. Orofacial function was evaluated with NOT-S. Results The mutation was identified in 17 of 37 family members. The mean number of missing teeth due to agenesis was 10.3 ± 4.1, (range 4–17) in the mutation group and 0.1 ± 0.3, (range 0–1) in the non-mutation group (p < 0.01). All individuals with the mutation were missing the maxillary lateral incisors and one or more of the mandibular incisors; and 81.3% were missing all four. Stimulated saliva secretion was 0.9 ± 0.5 ml/min in the mutation group vs 1.7 ± 0.6 ml/min in the non-mutation group (p < 0.01). Reduced ability to sweat was reported by 82% in the mutation group and by 20% in the non-mutation group (p < 0.01). The mean NOT-S score was 3.0 ± 1.9 (range 0–6) in the mutation group and 1.5 ± 1.1 (range 0–5) in the non-mutation group (p < 0.01). Lisping was present in 56% of individuals in the mutation group. Conclusions Individuals with a c.1072C > T mutation in the EDAR-gene displayed a typical pattern of congenitally missing teeth in the frontal area with functional consequences. They therefore have a need for special attention in dental care, both with reference to tooth agenesis and low salivary secretion with an increased risk for caries. Sweating problems were the most frequently reported symptom from other ectodermal structures. PMID:24884697

A comparative anchorage control study between conventional and self-ligating bracket systems using differential moments.

PubMed

de Almeida, Marcio Rodrigues; Herrero, Francisco; Fattal, Amine; Davoody, Amirparviz R; Nanda, Ravindra; Uribe, Flavio

2013-11-01

To compare the efficiency in anchorage preservation of conventional and self-ligating brackets after the extraction of first maxillary premolars using differential moment mechanics. Thirty-eight patients requiring extraction of maxillary first premolars and maximum anchorage during space closure were evaluated based on bracket type. Group 1, comprising 23 patients, was bonded with preadjusted conventional brackets (CBs) with a slot of 0.022-inch × 0.030-inch. Group 2 comprised 15 patients who were bonded with 0.022 inch preadjusted self-ligating brackets (SLBs). Patients in both groups received a nickel titanium (NiTi) intrusion arch and a 150 g NiTi closing coil spring for separate canine retraction, followed by a continuous mushroom loop archwire to retract the incisors. Lateral cephalograms were available at the start of treatment (T1) and at the completion of space closure (T2). Statistical comparisons were performed with paired and unpaired Student's t-tests. No significant differences were found between the groups in maxillary molars anchorage loss (3.87 ± 1.35 mm and 3.65 ± 1.73 mm for the CB and SLB groups, respectively). Only the mean vertical movement of the tip of the incisor was significantly different between the groups (CB  =  -0.92 ± 1.46 mm; SLB  =  0.56 ± 1.65 mm). There were no significant differences in the amount of anchorage loss of the maxillary first molars between SLB and CB systems during space closure using differential moments.

Maxillary arch width and buccal corridor changes with orthodontic treatment. Part 1: differences between premolar extraction and nonextraction treatment outcomes.

PubMed

Meyer, Anna H; Woods, Michael G; Manton, David J

2014-02-01

In this retrospective study, we examined and compared the pretreatment and posttreatment arch widths and buccal corridor changes in subjects who had received orthodontic treatment either with or without premolar extractions. Pretreatment and posttreatment casts, frontal smiling photographs, and lateral cephalograms of 30 extraction and 27 nonextraction patients were analyzed to determine any significant differences in arch widths, buccopalatal inclinations of the teeth, and buccal corridor widths and areas, both within and between the 2 groups. Relationships between buccal corridor measurements and corresponding arch widths and buccopalatal inclinations of the teeth were also examined. There was a significant increase in the posttreatment maxillary intercanine width in the extraction group but not in the nonextraction group. Both the pretreatment and posttreatment arch widths between the maxillary first molars and at the level of the posterior rugae were greater in the nonextraction group than in the extraction group. There were no significant differences in any buccal corridor widths or areas measured between the extraction and nonextraction subjects. Because they reflect different morphologies, there are likely to be significant differences in average maxillary anterior and posterior posttreatment arch widths in those treated with or without extractions. However, these arch width differences are not likely to be discernible in extraction and nonextraction patients as differences in the buccal corridor widths and areas. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Maxillary advancement for mandibular prognathism: indications and rationale.

PubMed

Rosen, H M

1991-05-01

The surgical correction of mandibular prognathism has traditionally involved posterior repositioning of the mandibular body. This treatment approach corrects the skeletal disproportion at the expense of reducing facial skeletal volume and can unpredictably result in inadequately supported soft tissues with loss of skeletal definition. In an effort to avoid these sequelae of mandibular reduction, 18 patients diagnosed as having mandibular prognathism were treated with maxillary advancement surgery at the Le Fort I level. Mean patient SNB angle was 85.2 degrees, as compared with a normal 79 +/- 3 degrees. Maxillae were documented to be in normal position relative to both cranial base and Frankfort horizontal. The mean maxillary advancement was 6.9 mm, with a range of 4.5 to 8.8 mm. All patients required genioplasty to reduce vertical chin height and/or to laterally shift the chin. At the time of follow-up (mean 16.2 months), all patients retained cephalometric data suggestive of enlarged mandibles and excessive anterior facial divergence. However, maxillomandibular harmony and facial convexity had been restored without sacrificing skeletal volume. Treatment results demonstrated these faces to be skeletally well proportioned despite lower face protrusion that was beyond "normal." Postoperative appearances were characterized by a well-supported soft-tissue envelope and a highlighted skeletal foundation, creating angular, well-defined lower faces. These findings support the credibility of maxillary advancement as the procedure of choice in selected individuals with mandibular prognathism. Indications and an aesthetic rationale for this surgical approach are presented.

Fabrication and Evaluation of a Noncompliant Molar Distalizing Appliance: Bonded Molar Distalizer

PubMed Central

Sodagar, A.; Ahmad Akhoundi, M. S.; Rafighii, A.; Arab, S.

2011-01-01

Objective Attempts to treat class II malocclusions without extraction in non-compliant patients have led to utilization of intraoral molar distalizing appliances. The purpose of this study was to investigate dental and skeletal effects of Bonded Molar Distalizer (BMD) which is a simple molar distalizing appliance. Materials and Methods Sixteen patients (12 girls, four boys) with bilateral half-cusp class II molar relationship, erupted permanent second molars and normal or vertical growth pattern were selected for bilateral distalization of maxillary molars via BMD. The screws were activated every other day, alternately. Lateral cephalograms and study models were obtained before treatment and after 11 weeks activation of the appliance. Results Significant amounts of molar distalization, molar distal tipping and anchorage loss were observed. The mean maxillary first molar distal movement was 1.22±0.936 mm with a distal tipping of 2.97±3.74 degrees in 11 weeks. The rate of distal movement was 0.48 mm per month. Reciprocal mesial movement of the first premolars was 2.26±1.12 mm with a mesial tipping of 4.25±3.12 degrees. Maxillary incisors moved 3.55±1.46 mm and tipped 9.87±5.03 degrees mesially. Lower anterior face height (LAFH) decreased 1.28±1.36 mm. Conclusion BMD is appropriate for distalizing maxillary molars, especially in patients with critical LAFH, although significant amounts of anchorage loss occur using this appliance. PMID:22457837

Transverse maxillary distraction in patients with periodontal pathology or insufficient tooth anchorage using custom-made devices.

PubMed

Fernández-Sanromán, Jacinto; Donascimento, Montserrat González; López, Alberto Costas; Ferro, Martín Fernández; Berrondo, Ibon Almandoz

2010-07-01

We present our experience using modified Hyrax devices for treating transverse deficiencies of the maxilla in adult patients with periodontal pathology or insufficient tooth anchorage. The surgical technique, clinical indications, and results are discussed. Eight adult patients (6 females, 2 males) requiring maxillary expansion were studied prospectively between July 2002 and July 2007. All the patients had periodontal pathology or insufficient tooth anchorage preventing the use of conventional Hyrax devices. Patients underwent surgically assisted rapid maxillary expansion with the use of custom-made modified Hyrax devices (bone-borne or tooth-bone-borne devices). Patients received preoperatively (T1), at the end of distraction (T2), at removal of the expansion device (T3), and 12 months after surgery (T4) lateral and posterior anterior cephalograms and study models to measure the width of the anterior and posterior dental arches with a digital sliding calliper. Mean age was 28.5 years (range, 18-45 years). A significant widening of the anterior (6.3 +/- 1.6 mm) and posterior (7.1 +/- 1.2 mm) dental arches was demonstrated. No significant differences were found when comparing T3 with T4 measures. No significant complications were found. The results indicated that maxillary expansion with custom-made devices in adults was an easy, affordable, predictable and stable technique without significant complications in patients who suffer periodontal pathology or patients without enough dental support. Copyright 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

Coexistence of true talon cusp and double dens invaginatus in a single tooth: a rare case report and review of the literature.

PubMed

Nu Nu Lwin, Hnin; Phyo Kyaw, Pyae; Wai Yan Myint Thu, Sai

2017-12-01

Co-occurrence of a talon cusp and double dens invaginatus is an extremely rare developmental dental anomaly. This case report represents a talon cusp with two dens invaginatus on a maxillary right lateral incisor. Early identification is needed for prevention of potential problems on the affected or opposing tooth.

MISSE-6 hardware

NASA Image and Video Library

2009-09-02

ISS020-E-037367 (1 Sept. 2009) --- A close-up view of a Materials International Space Station Experiment (MISSE-6) on the exterior of the Columbus laboratory is featured in this image photographed by a space walking astronaut during the STS-128 mission’s first session of extravehicular activity (EVA). MISSE collects information on how different materials weather in the environment of space. MISSE was later placed in Space Shuttle Discovery’s cargo bay for its return to Earth.

Three-unit bridge construction in anterior single-pontic areas using a metal-free restorative.

PubMed

Narcisi, E M

1999-02-01

A new glass-ceramic material, IPS Empress 2, is revolutionizing esthetic restorative dentistry by allowing metal-free, three-unit bridge construction in anterior and premolar single-pontic areas. The case discussed in this article illustrates the material's application in the dual-arch restoration of a young woman with congenitally missing teeth. The material was used as an alternative to single-tooth implant restorations to place two maxillary three-unit bridges, one mandibular three-unit bridge, and two mandibular porcelain veneers. IPS Empress 2 provides an esthetic alternative to porcelain-fused-to-metal restorations by facilitating attractive, functional tooth restoration.

20 CFR 61.307 - Transportation of recovered bodies of missing persons.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Transportation of recovered bodies of missing... Benefits § 61.307 Transportation of recovered bodies of missing persons. If an employee dies while in detention and the body is later recovered, the Office may provide the cost of transporting the body to the...

Prediction of changes due to mandibular autorotation following miniplate-anchored intrusion of maxillary posterior teeth in open bite cases.

PubMed

Kassem, Hassan E; Marzouk, Eiman S

2018-05-14

Prediction of the treatment outcome of various orthodontic procedures is an essential part of treatment planning. Using skeletal anchorage for intrusion of posterior teeth is a relatively novel procedure for the treatment of anterior open bite in long-faced subjects. Data were analyzed from lateral cephalometric radiographs of a cohort of 28 open bite adult subjects treated with intrusion of the maxillary posterior segment with zygomatic miniplate anchorage. Mean ratios and regression equations were calculated for selected variables before and after intrusion. Relative to molar intrusion, there was approximately 100% vertical change of the hard and soft tissue mention and 80% horizontal change of the hard and soft tissue pogonion. The overbite deepened two folds with 60% increase in overjet. The lower lip moved forward about 80% of the molar intrusion. Hard tissue pogonion and mention showed the strongest correlations with molar intrusion. There was a general agreement between regression equations and mean ratios at 3 mm molar intrusion. This study attempted to provide the clinician with a tool to predict the changes in key treatment variables following skeletally anchored maxillary molar intrusion and autorotation of the mandible.

The Evaluation of Root Fracture with Cone Beam Computed Tomography (CBCT): An Epidemiological Study

PubMed Central

Doğan, Mehmet-Sinan; Callea, Michele; Kusdhany, Lindawati S.; Aras, Ahmet; Maharani, Diah-Ayu; Mandasari, Masita; Adiatman, Melissa

2018-01-01

Background The aim of this study was evaluation of the cone-beam computed tomography (CBCT) image of 50 patients at the ages of 8-15 suspecting root fracture and root fracture occurred, exposed to dental traumatic. In additionally, this study was showed effect of crown fracture on root fracture healing. Material and Methods All of the individuals included in the study were obtained images with the cone-beam computed tomography range of 0,3 voxel and 8.9 seconds.(i-CAT®, Model 17-19, Imaging SciencesInternational, Hatfield, Pa USA).The information obtained from the history and CBCT images of patients were evaluated using chi-square test statistical method the mean and the distribution of the independent variables. Results 50 children, have been exposed to trauma, was detected root fracture injury in 97 teeth. Horizontal root fracture 63.9% of the 97 tooth, the oblique in 31.9%, both the horizontal and oblique in 1.03%, partial fracture in 2.06% ,and both horizontally and vertical in 1.03% was observed.The most affected teeth, respectively of, are the maxillary central incisor (41.23% left, right, 37.11%), maxillary left lateral incisor (9.27%), maxillary right lateral incisor (11.34%), and mandibular central incisor (1.03%). Conclusions Crown fractures have negative effects on spontaneous healing of root fractures. CBCT are used selected as an alternative to with conventional radiography for diagnosis of root fractures. In particular, ıt’s cross-sectional image is quite useful and has been provided more conveniences seeing the results of diagnosis and treatment for clinician. Key words:Root fracture, CBCT, Epidemiolog. PMID:29670714

Randomized clinical trial comparing control of maxillary anchorage with 2 retraction techniques.

PubMed

Xu, Tian-Min; Zhang, Xiaoyun; Oh, Hee Soo; Boyd, Robert L; Korn, Edward L; Baumrind, Sheldon

2010-11-01

The objective of this pilot randomized clinical trial was to investigate the relative effectiveness of anchorage conservation of en-masse and 2-step retraction techniques during maximum anchorage treatment in patients with Angle Class I and Class II malocclusions. Sixty-four growing subjects (25 boys, 39 girls; 10.2-15.9 years old) who required maximum anchorage were randomized to 2 treatment techniques: en-masse retraction (n = 32) and 2-step retraction (n = 32); the groups were stratified by sex and starting age. Each patient was treated by a full-time clinic instructor experienced in the use of both retraction techniques at the orthodontic clinic of Peking University School of Stomatology in China. All patients used headgear, and most had transpalatal appliances. Lateral cephalograms taken before treatment and at the end of treatment were used to evaluate treatment-associated changes. Differences in maxillary molar mesial displacement and maxillary incisor retraction were measured with the before and after treatment tracings superimposed on the anatomic best fit of the palatal structures. Differences in mesial displacement of the maxillary first molar were compared between the 2 treatment techniques, between sexes, and between different starting-age groups. Average mesial displacement of the maxillary first molar was slightly less in the en-masse group than in the 2-step group (mean, -0.36 mm; 95% CI, -1.42 to 0.71 mm). The average mesial displacement of the maxillary first molar for both treatment groups pooled (n = 63, because 1 patient was lost to follow-up) was 4.3 ± 2.1 mm (mean ± standard deviation). Boys had significantly more mesial displacement than girls (mean difference, 1.3 mm; P <0.03). Younger adolescents had significantly more mesial displacement than older adolescents (mean difference, 1.3 mm; P <0.02). Average mesial displacement of the maxillary first molar with 2-step retraction was slightly greater than that for en-masse retraction, but the difference did not reach statistical significance. This finding appears to contradict the belief of many clinicians that 2-step canine retraction is more effective than en-masse retraction in preventing clinically meaningful anchorage loss. Copyright © 2010 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Effects of orthopedic maxillary expansion on nasal cavity size in growing subjects: a low dose computer tomography clinical trial.

PubMed

Cordasco, Giancarlo; Nucera, Riccardo; Fastuca, Rosamaria; Matarese, Giovanni; Lindauer, Steven J; Leone, Pietro; Manzo, Paolo; Martina, Roberto

2012-11-01

The aim of this retrospective clinical trial was to evaluate the effects of rapid maxillary expansion on skeletal nasal cavity size in growing subjects by use of low dose computer tomography. Eight Caucasian children (three male; five female) with a mean age of 9.7 years (SD±1.41) were the final sample of this research that underwent palatal expansion as a first phase of orthodontic treatment. The maxillary expander was banded to the upper first molars and was activated according a rapid maxillary expansion protocol. Low-dose computer tomography examinations of maxilla and of the low portion of nasal cavity were performed before inserting the maxillary expander (T0) and at the end of retention (T1), 7 months later. A low-dose computer tomography protocol was applied during the exams. Image processing was achieved in 3 steps: reslicing; dental and skeletal measurements; skeletal nasal volume computing. A set of reproducible skeletal and dental landmarks were located in the coronal passing through the first upper right molar furcation. Using the landmarks, a set of transverse linear measurements were identified to estimate maximum nasal width and nasal floor width. To compute the nasal volume the lower portion of the nasal cavity was set as region of interest. Nasal volume was calculated using a set of coronal slices. In each coronal slice, the cortical bone of the nasal cavity was identified and selected with a segmentation technique. Dependent t-tests were used to evaluate changes due to expansion. For all tests, a significance level of P<0.05 was used. Rapid maxillary expansion produced significant increases of linear transverse skeletal measurements, these increments were bigger in the lower portion of the nasal cavities: nasal floor width (+3.15 mm; SD ± 0.99), maximum nasal width (+2.47 mm; SD ± 0.99). Rapid maxillary expansion produced significant increment of the total nasal volume (+1.27 cm(3) ± SD 0.65). The anterior volume increase was 0.58 cm(3) while the posterior one was 0.69 cm(3). In growing subjects RME is able to significantly enlarge the dimension of nasal cavity. The increment is bigger in the lower part of the nose and equally distributed between the anterior e the posterior part of the nasal cavity. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Revascularization for a necrotic immature permanent lateral incisor: a case report and literature review.

PubMed

Kottoor, Jojo; Velmurugan, Natanasabapathy

2013-07-01

Revascularization is a valuable treatment in immature necrotic teeth that allows the continuation of root development. This article describes the successful revascularization treatment of an immature maxillary lateral incisor that was initially diagnosed with apical periodontitis. The tooth was asymptomatic and functional clinically and radiographically during the follow-up period of 5 years. The follow-up showed evidence of progressive thickening of the dentinal walls, development of root length and apical closure. The article also discusses the currently available literature regarding revascularization of immature permanent teeth. © 2012 John Wiley & Sons Ltd, BSPD and IAPD.

Long-term observation of endodontic surgical intervention to treat root perforation and apical periodontitis: a case report of an amalgam-restored tooth.

PubMed

Tsurumachi, Tamotsu; Hayashi, Makoto

2003-10-01

A case of crestal root perforation and periapical lesion in a maxillary left lateral incisor is reported. Teeth with root perforation present technical difficulties in their clinical management because of their complex defects. In the present case, surgical endodontic treatment was chosen. The apical and lateral pathology was curetted, the tooth root was resected, and a retrograde root restoration of amalgam was placed in a root-end cavity and perforation site. A 10-year follow-up clinical and radiographic examination showed an asymptomatic tooth with osseous healing proceeding.

Nonunion of the external maxillary distraction in cleft lip and palate: analysis of possible reasons.

PubMed

He, Dongmei; Genecov, David G; Barcelo, Raul

2010-10-01

Distraction osteogenesis (DO) is an effective way to treat severe maxillary deficiency in patients with cleft lip and palate. It has been reported to have long-term stability and low relapse rate compared with conventional maxillary osteotomy in large maxillary movement. However, complications such as nonunion are seldom reported. While developing our external distraction techniques, we had 4 nonunion cleft lip and palate (CLP) patients. The aim of this study is to analyze the possible reasons for these conditions by comparing them to patients successfully treated at 1 craniofacial institute. Fifty-six patients with CLP deformities treated with external maxillary distraction from 2000 to 2006 in 1 craniofacial center were reviewed. Among them, 17 had full records and follow-up time of more than 1 year. They had rigid external halo distraction with dental splint after a high Le Fort I osteotomy. Distraction was started at 5 days with a rate of 1 mm per day until the maxilla acquired the planned correction. Consolidation time ranged from 4 weeks to 3 months. Patients' general information, DO protocol, and cephalometric radiograph measurements before DO, immediately after DO, and follow-ups were evaluated. Thirteen of 17 patients successfully completed DO, whereas 4 others developed dental occlusion relapse 2 to 3 months after device removal. Later jaw surgery showed nonunion at the distraction sites. These were our first patients treated with external distraction. Their consolidation time was from 4 to 6 weeks with a mean of 5.2 weeks. After increasing the consolidation time up to 12 weeks, all of the other 13 patients had successful results without nonunion. Their mean consolidation time was 9.8 weeks. The nonunion group had significantly shorter consolidation time, older age, and larger distraction osteogenesis (DO) advancement than the successful group statistically. There was also a greater percentage of bilateral CLP patients in the nonunion group than in the successful treatment group. Among the 4 nonunion patients, 2 had failed alveolar bone graft before DO, and 3 did not have face mask retention therapy after device removal. The horizontal relapse rate in the 13 successful patients was 1 to 3 mm (mean, 11.9%) after 1 to 3 years of follow-up. All of these patients had good occlusion in the short-term follow-up (1 yr). Five developed end-to-end or Class III malocclusion in the long-term follow-up (1-3 yrs) because of maxillary relapse and continued mandibular growth that required jaw surgery later. A short consolidation time can cause nonunion, and should be lengthened to 12 weeks or more for a stable maxilla. Older age, bilateral CLP, large DO advancement (>15 mm), and compromised bone healing are the risk factors for nonunion. Copyright © 2010 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

A new species of the genus Capoeta Valenciennes, 1842 from the Caspian Sea basin in Iran (Teleostei, Cyprinidae)

PubMed Central

Jouladeh-Roudbar, Arash; Eagderi, Soheil; Ghanavi, Hamid Reza; Doadrio, Ignacio

2017-01-01

Abstract A new species of algae-scraping cyprinid of the genus Capoeta Valenciennes, 1842 is described from the Kheyroud River, located in the southern part of the Caspian Sea basin in Iran. The species differs from other members of this genus by a combination of the following characters: one pair of barbels; predorsal length equal to postdorsal length; maxillary barbel slightly smaller than eye’s horizontal diameter and reach to posterior margin of orbit; intranasal length slightly shorter than snout length; lateral line with 46–54 scales; 7–9 scales between dorsal-fin origin and lateral line, and 6–7 scales between anal-fin origin and lateral line. PMID:28769726

Treatment of combined endodontic: periodontic lesion by sealing of palato-radicular groove using biodentine.

PubMed

Naik, Mayuri; de Ataide, Ida de Noronha; Fernandes, Marina; Lambor, Rajan

2014-11-01

Palatoradicular groove is a developmental anomaly which is predominantly found in maxillary lateral incisors. It provides a susceptible alcove for the progression of localised periodontal inflammation which can further cause pulpal involvement. This case report describes the successful treatment of a large periodontic - endodontic lesion usingnon surgical endodontic therapy and biodentine for the sealing of the palatoradicular groove.

Is radical surgery of an inverted papilloma of the maxillary sinus obsolete? a case report.

PubMed

Yildirim, Vedat; Pausch, Niels Christian; Halama, Dirk; Lübbers, Heinz-Theo; Yildirim, Ayhan

2016-12-01

Sinonasal inverted papilloma is a locally aggressive tumor arising from the Schneiderian membrane which lines the nasal cavity and paranasal sinuses. Aggressive surgical approaches, such as lateral rhinotomy, were used until recently for complete removal of the inverted papilloma. Currently, endoscopic resection is the gold standard in the treatment of inverted papilloma. However, there are situations that justify an open approach. For example there are studies that report a higher postoperative recurrence rate after endonasal endoscopic resection, particularly in the treatment of recurrent diseases. While endoscopic resection performed by an experienced surgeon is definitely a minimally invasive therapy, an open approach is not necessarily associated with functional and aesthetic disadvantages. This case report describes the treatment of inverted papilloma by an open approach. This has been described before but the new gold standard of endoscopic resection has to be taken into account before any treatment decision is made nowadays. Contrast-enhanced magnetic resonance imaging of the head and neck area was indicated in a 72-year-old white German man who presented with suspected squamous cell carcinoma of his lower lip. Magnetic resonance imaging additionally revealed a 3×2 cm 2 polycyclic arranged mucosal thickening with cystic and solid contrast affine shares at the antral laterocaudal area of his right maxillary sinus, extending from his right lateral nasal wall to his maxillary sinus floor. He received antral polypectomy with medial maxillectomy via a unilateral LeFort I osteotomy approach. His pterygoid plate was preserved. A histological examination demonstrated a tumor composed of hyperplastic squamous epithelium protruding into the stroma (surface epithelial cells grew downward into the underlying supportive tissue), thus producing a grossly convoluted cerebriform appearance. Two weeks later, the patient regained a well-formed maxilla without any restrictions. He has remained disease-free for 25 months following the surgery and surveillance was continued in our tumor clinic. Endoscopic resection of an inverted papilloma continues to be the gold standard. However, some cases require a radical approach. This does not necessarily increase patient morbidity.

MISSE-6 hardware

NASA Image and Video Library

2009-09-02

ISS020-E-037372 (1 Sept. 2009) --- A close-up view of a Materials International Space Station Experiment (MISSE-6) on the exterior of the Columbus laboratory is featured in this image photographed by a space walking astronaut during the STS-128 mission’s first session of extravehicular activity (EVA). MISSE collects information on how different materials weather in the environment of space. MISSE was later placed in Space Shuttle Discovery’s payload bay for its return to Earth. A portion of a payload bay door is visible in the background.

MISSE-6 hardware

NASA Image and Video Library

2009-09-02

ISS020-E-037369 (1 Sept. 2009) --- A close-up view of a Materials International Space Station Experiment (MISSE-6) on the exterior of the Columbus laboratory is featured in this image photographed by a space walking astronaut during the STS-128 mission’s first session of extravehicular activity (EVA). MISSE collects information on how different materials weather in the environment of space. MISSE was later placed in Space Shuttle Discovery’s payload bay for its return to Earth. A portion of a payload bay door is visible in the background.

Asymmetric rapid maxillary expansion in true unilateral crossbite malocclusion: a prospective controlled clinical study.

PubMed

Ileri, Zehra; Basciftci, Faruk Ayhan

2015-03-01

To investigate the short-term effects of the asymmetric rapid maxillary (ARME) appliance on the vertical, sagittal, and transverse planes in patients with true unilateral posterior crossbite. Subjects were divided into two groups. The treatment group was comprised of 21 patients with unilateral posterior crossbite (mean age  =  13.3 ± 2.1 years). Members of this group were treated with the ARME appliance. The control group was comprised of 17 patients with Angle Class I who were kept under observation (mean age  =  12.3 ± 0.8 years). Lateral and frontal cephalograms were taken before the expansion (T1), immediately after expansion (T2), and at postexpansion retention (T3) in the treatment group and at preobservation (T1) and postobservation (T2) in the control group. A total of 34 measurements were assessed on cephalograms. For statistical analysis, the Wilcoxon test and analysis of covariance were used. The ARME appliance produced significant increases in nasal, maxillary base, upper arch, and lower arch dimensions (P < .01) and a clockwise rotation of the occlusal plane (P  =  .001). The ARME appliance created asymmetric increments in the transversal dimensions of the nose, maxilla, and upper arch in the short term. Asymmetric expansion therapy for subjects with unilateral maxillary deficiency may provide satisfactory outcomes in adolescents, with the exception of mandibular arch expansion. The triangular pattern of expansion caused clockwise rotation of the mandible and the occlusal plane and produced significant alterations in the vertical facial dimensions, whereas it created no displacement in maxilla in the sagittal plane.

An Ex Vivo Comparison of Digital Radiography, Cone Beam and Micro Computed Tomography in the Detection of the Number of Canals in the Mesiobuccal Roots of Maxillary Molars

PubMed Central

Domark, Jeffrey D.; Hatton, John F.; Benison, Roxanne P.; Hildebolt, Charles F.

2014-01-01

Introduction The purpose of this study was to compare digital periapical and cone beam computed tomography (CBCT) images to determine the number of canals in the mesiobuccal root (MB) of maxillary molars and to compare these counts to micro CT (μCT), which was also used to determine canal configuration. Methods Digital periapical (RVG 6100), CBCT (9000 3D) and μCT images (the reference standard) were obtained of 18 hemi-maxillas. With periapical and CBCT images, 2 endodontists independently counted the number of canals in each molar and repeated counts 2 weeks later. Teeth were extracted, scanned with μCT, and 2 additional endodontists, by consensus, determined the number and configuration of canals. The Friedman test was used to test for differences. Results In mesiobuccal roots, 2 canals were present in 100% (13/13) of maxillary first and 57% (8/14) second molars, and 69% (9/13) and 100% (8/8) of these exited as two or more foramina. There was no difference in canal counts for original and repeat reads by the two observers with periapicals (P = 0.06) and with CBCT (P = 0.88) and no difference when CBCT counts were compared with μCT counts (P = 0.52); however, when periapical counts were compared with μCT counts there was a significant difference (P = 0.04). Conclusions For cadaver maxillary molars, μCT canal counts were significantly different from digital periapical radiograph counts but not different from Carestream 9000 3D CBCT counts. PMID:23791260

Maxillary dental anomalies in patients with cleft lip and palate: a cone beam computed tomography study.

PubMed

Celikoglu, M; Buyuk, S K; Sekerci, A E; Cantekin, K; Candirli, C

2015-01-01

To compare the frequency of maxillary dental anomalies in patients affected by unilateral (UCLP) and bilateral (BCLP) cleft lip with palate and to determine whether statistical differences were present or not between cleft and normal sides in UCLP group by using cone beam computed tomography (CBCT). In addition, the frequency of those dental anomalies was compared with previous studies presenting the same population without cleft Study Design: Fifty non-syndromic patients affected by UCLP (28 patients) and BCLP (22 patients) were selected for analysis of dental anomalies by means of CBCT. The frequency of maxillary dental anomalies including tooth agenesis, microdontia of lateral incisor, ectopic eruption and impaction of canine and supernumerary tooth were examined. Pearson chi-square and Fisher's exact tests were performed for statistical comparisons. All patients affected by UCLP and BCLP were found to have at least one maxillary dental anomaly. The most frequently observed dental anomaly was tooth agenesis (92.5% and 86.4%, respectively) in UCLP and BCLP groups. Tooth agenesis and canine impaction were observed more commonly in the cleft side (75.0% and 35.7%, respectively) than in the normal side (57.1% and 14.3%, respectively) in UCLP group (p≯0.05). All dental anomalies were found to be higher in both cleft groups than in general populations not affected by cleft. Since patients affected by UCLP and BCLP had at least one dental anomaly and higher dental anomaly frequency as compared to patients without cleft, those patients should be examined carefully prior to orthodontic treatment.

Effects of cleft type, facemask anchorage method, and alveolar bone graft on maxillary protraction: a three-dimensional finite element analysis.

PubMed

Yang, Il-Hyung; Chang, Young-Il; Kim, Tae-Woo; Ahn, Sug-Joon; Lim, Won-Hee; Lee, Nam-Ki; Baek, Seung-Hak

2012-03-01

To investigate biomechanical effects of cleft type (unilateral/bilateral cleft lip and palate), facemask anchorage method (tooth-borne and miniplate anchorage), and alveolar bone graft on maxillary protraction. Three-dimensional finite element analysis with application of orthopedic force (30° downward and forward to the occlusal plane, 500 g per side). Computed tomography data from a 13.5-year-old girl with maxillary hypoplasia. Eight three-dimensional finite element models were fabricated according to cleft type, facemask anchorage method, and alveolar bone graft. Initial stress distribution and displacement after force application were analyzed. Unilateral cleft lip and palate showed an asymmetric pattern in stress distribution and displacement before alveolar bone graft and demonstrated a symmetric pattern after alveolar bone graft. However, bilateral cleft lip and palate showed symmetric patterns in stress distribution and displacement before and after alveolar bone graft. In both cleft types, the graft extended the stress distribution area laterally beyond the infraorbital foramen. For both unilateral and bilateral cleft lip and palate, a facemask with a tooth-borne anchorage showed a dentoalveolar effect with prominent stress distribution and displacement on the upper canine point. In contrast, a facemask with miniplate anchorage exhibited an orthopedic effect with more favorable stress distribution and displacement on the middle maxilla point. In addition, the facemask with a miniplate anchorage showed a larger stress distribution area and sutural stress values than did the facemask with a tooth-borne anchorage. The pterygopalatine and zygomatico-maxillary sutures showed the largest sutural stress values with a facemask with a miniplate anchorage and after alveolar bone grafting, respectively. In this three-dimensional finite element analysis, it would be more advantageous to perform maxillary protraction using a facemask with a miniplate anchorage than a facemask with a tooth-borne anchorage and after alveolar bone graft rather than before alveolar bone graft, regardless of cleft type.

The effects of the pendulum distalising appliance and cervical headgear on the dentofacial structures.

PubMed

Toy, Ebubekir; Enacar, Ayhan

2011-05-01

Headgears are effective in distalising maxillary molars, but success depends on patient compliance and tolerance. Intra-oral distalising appliances are simple to construct and use and may be a better alternative for patients who are non-compliant or cannot tolerate headgear. To compare the Pendulum (PEN) appliance and cervical headgear (CHG) on distal movement of maxillary first molars in patients requiring maxillary molar distalisation. Thirty patients were randomly divided into two groups. Both groups had comparable occlusal and cephalometric characteristics before treatment. Fifteen patients (9 girls, 6 boys) with a mean age of 1 1.45 +/- 1.54 years (Range: 8.58-13.50 years) were treated with Pendulum appliances and 15 patients (10 girls, 5 boys) with a mean age of 11.72 + 1.24 years (Range: 9.58-13.33 years) were treated with a Ricketts-type CHG. A pilot study of four patients estimated that the time required to distalise the maxillary molars with the Pendulum appliance was five months. Therefore, the end of treatment records for the CHG group were taken after 4.96 +/- 0.35 months. Lateral and postero-anterior cephalometric radiographs were taken of both groups at the start (T1) and end of distalisation/treatment (T2). Changes in cephalometric measurements in the two groups were compared with Wilcoxon and Mann-Whitney U tests. Measurements indicated that U6-ANS distance, overjet and U1-APo distance increased, U6-PP angle and U6-PTV distance reduced, and the molar relationship improved more in the PEN group compared with the CHG group. Statistically, significant right molar - left molar differences were found between the two groups. Distalisation produced significant side effects, resulting in distal tipping of the first molars and an increase in overjet, whereas the CHG reduced the overjet. The Pendulum appliance was more effective than the CHG in distalising the maxillary first molars.

Effects of mechanical properties of adhesive resin cements on stress distribution in fiber-reinforced composite adhesive fixed partial dentures.

PubMed

Yokoyama, Daiichiro; Shinya, Akikazu; Gomi, Harunori; Vallittu, Pekka K; Shinya, Akiyoshi

2012-01-01

Using finite element analysis (FEA), this study investigated the effects of the mechanical properties of adhesive resin cements on stress distributions in fiber-reinforced resin composite (FRC) adhesive fixed partial dentures (AFPDs). Two adhesive resin cements were compared: Super-Bond C&B and Panavia Fluoro Cement. The AFPD consisted of a pontic to replace a maxillary right lateral incisor and retainers on a maxillary central incisor and canine. FRC framework was made of isotropic, continuous, unidirectional E-glass fibers. Maximum principal stresses were calculated using finite element method (FEM). Test results revealed that differences in the mechanical properties of adhesive resin cements led to different stress distributions at the cement interfaces between AFPD and abutment teeth. Clinical implication of these findings suggested that the safety and longevity of an AFPD depended on choosing an adhesive resin cement with the appropriate mechanical properties.

Comprehensive surgical. Orthodontic treatment of class III malocclusion in cleft patient involving minimally invasive surgery Case report and literature review.

PubMed

Stojkovic, Goran; Stojkovic, Miodrag; Stojkovic, Jasna; Nikolic, Dejan; Stajcic, Zoran

2016-12-19

Surgical and orthodontic treatment of a teenage cleft patient. Authors describe the case of a 13 year old female cleft patient presented with class III malocclusion RESULT: The patient underwent comprehensive surgical secondary bone grafting and orthodontic treatment. Stable skeletal and occlusal class I relationship was achived and maintained in the post treatment observation period till the age of 16. Although several authors suggests primary gingivoperiosteoplasty, other advocates that such early intervention can cause later restrictions in maxillary growth. For alveolar reconstruction, maxillary growth and dental age were the main considerations in determining the timing of surgical intervention. This case showed that borderline cases of complex dentoalveolar and skeletal anomaly in cleft patients could be successfully treated with comprehensive secondary bone grafting and orthodontic treatment thus avoiding the need for orthognatic surgery. Alveolar bone grafting, Cleft, Malocclusion.

Warnings reduce false memories for missing aspects of events.

PubMed

Gerrie, Matthew P; Garry, Maryanne

2011-01-01

When people see movies with some parts missing, they falsely recognize many of the missing parts later. In two experiments, we examined the effect of warnings on people's false memories for these parts. In Experiment 1, warning subjects about false recognition before the movie (forewarnings) reduced false recognition, but warning them after the movie (postwarnings) reduced false recognition to a lesser extent. In Experiment 2, the effect of the warnings depended on the nature of the missing parts. Forewarnings were more effective than postwarnings in reducing false recognition of missing noncrucial parts, but forewarnings and postwarnings were similarly effective in reducing false recognition of crucial missing parts. We use the source monitoring framework to explain our results.

Micro Imaging Spectrometer for Subsurface Studies of Martian Soil: Ma_Miss

NASA Astrophysics Data System (ADS)

de Sanctis, M. C.; Coradini, A.; Ammannito, E.; Boccaccini, A.; di Iorio, T.; Battistelli, E.; Capanni, A.

2012-03-01

Ma_Miss (Mars Multispectral Imager for Subsurface Studies) is a spectrometer devoted to observe the lateral wall of the borehole generated by the drill installed on the ExoMars Pasteur Rover to perform in situ investigations in the Mars subsurface.

Cleansing and surface modifying agents on implants: fixation and related aspects of aesthetics.

PubMed

Ling, B C; Gillings, B R

1995-01-01

With the prognosis of dental implant replacement of missing teeth becoming better each year, practitioners are focusing their attention on the aesthetic aspects of implantology. However, improvement in aesthetics is only possible with the improvement in implant technology, surgical techniques and prosthodontic procedures. This study aimed at evaluating the effects of various physical and chemical agents on the implant surface; with the view of obtaining increased surface area and biocompatibility. The study found that the treatment of air-aluminum oxide blasted implants using a mixture of 30% HNO3-5% HF acids produced a surface which meets the consideration of aesthetics for implants placed in the anterior maxillary region.

Surgical management of lateral incisor with type II dens invaginatus and a periapical pathosis: A case report with 1-year follow-up.

PubMed

Lakshmi, V Naga; Varma, K Madhu; Sajjan, Girija S; Rambabu, Tanikonda

2017-01-01

Dens invaginatus is a relatively common dental malformation resulting from an infolding of enamel organ into the dental papilla varying in depth into the tooth tissues. Complex morphological anatomy associated with the pulpal pathology presents inaccessibility to completely remove the necrotic pulp tissues and hence poses challenges in rendering endodontic treatment. A combination of nonsurgical and surgical management in treating such cases is advisable depending on the presented variations. The present case reports the surgical endodontic treatment of an immature maxillary lateral incisor with type II dens invaginatus and periapical pathology.

Surgical management of lateral incisor with type II dens invaginatus and a periapical pathosis: A case report with 1-year follow-up

PubMed Central

Lakshmi, V. Naga; Varma, K. Madhu; Sajjan, Girija S.; Rambabu, Tanikonda

2017-01-01

Dens invaginatus is a relatively common dental malformation resulting from an infolding of enamel organ into the dental papilla varying in depth into the tooth tissues. Complex morphological anatomy associated with the pulpal pathology presents inaccessibility to completely remove the necrotic pulp tissues and hence poses challenges in rendering endodontic treatment. A combination of nonsurgical and surgical management in treating such cases is advisable depending on the presented variations. The present case reports the surgical endodontic treatment of an immature maxillary lateral incisor with type II dens invaginatus and periapical pathology. PMID:28761255

Treatment of combined endodontic: periodontic lesion by sealing of palato-radicular groove using biodentine

PubMed Central

Naik, Mayuri; de Ataide, Ida de Noronha; Fernandes, Marina; Lambor, Rajan

2014-01-01

Introduction: Palatoradicular groove is a developmental anomaly which is predominantly found in maxillary lateral incisors. It provides a susceptible alcove for the progression of localised periodontal inflammation which can further cause pulpal involvement. This case report describes the successful treatment of a large periodontic – endodontic lesion usingnon surgical endodontic therapy and biodentine for the sealing of the palatoradicular groove. PMID:25506153

Lateral approach for maxillary sinus membrane elevation without bone materials in maxillary mucous retention cyst with immediate or delayed implant rehabilitation: case reports.

PubMed

Han, Ji-Deuk; Cho, Seong-Ho; Jang, Kuk-Won; Kim, Seong-Gwang; Kim, Jung-Han; Kim, Bok-Joo; Kim, Chul-Hun

2017-08-01

This case series study demonstrates the possibility of successful implant rehabilitation without bone augmentation in the atrophic posterior maxilla with cystic lesion in the sinus. Sinus lift without bone graft using the lateral approach was performed. In one patient, the cyst was aspirated and simultaneous implantation under local anesthesia was performed, whereas the other cyst was removed under general anesthesia, and the sinus membrane was elevated in a second process, followed by implantation. In both cases, tapered 11.5-mm-long implants were utilized. With all of the implants, good stability and appropriate bone height were achieved. The mean bone level gain was 5.73 mm; adequate bone augmentation around the implants was shown, the sinus floor was moved apically, and the cyst was no longer radiologically detected. Completion of all of the treatments required an average of 12.5 months. The present study showed that sufficient bone formation and stable implantation in a maxilla of insufficient bone volume are possible through sinus lift without bone materials. The results serve to demonstrate, moreover, that surgical treatment of mucous retention cyst can facilitate rehabilitation. These techniques can reduce the risk of complications related to bone grafts, save money, and successfully treat antral cyst.

Lateral approach for maxillary sinus membrane elevation without bone materials in maxillary mucous retention cyst with immediate or delayed implant rehabilitation: case reports

PubMed Central

2017-01-01

This case series study demonstrates the possibility of successful implant rehabilitation without bone augmentation in the atrophic posterior maxilla with cystic lesion in the sinus. Sinus lift without bone graft using the lateral approach was performed. In one patient, the cyst was aspirated and simultaneous implantation under local anesthesia was performed, whereas the other cyst was removed under general anesthesia, and the sinus membrane was elevated in a second process, followed by implantation. In both cases, tapered 11.5-mm-long implants were utilized. With all of the implants, good stability and appropriate bone height were achieved. The mean bone level gain was 5.73 mm; adequate bone augmentation around the implants was shown, the sinus floor was moved apically, and the cyst was no longer radiologically detected. Completion of all of the treatments required an average of 12.5 months. The present study showed that sufficient bone formation and stable implantation in a maxilla of insufficient bone volume are possible through sinus lift without bone materials. The results serve to demonstrate, moreover, that surgical treatment of mucous retention cyst can facilitate rehabilitation. These techniques can reduce the risk of complications related to bone grafts, save money, and successfully treat antral cyst. PMID:28875144

Prevalence of mesiodens in orthodontic patients with deciduous and mixed dentition and its association with other dental anomalies.

PubMed

Lara, Tulio Silva; Lancia, Melissa; da Silva Filho, Omar Gabriel; Garib, Daniela Gamba; Ozawa, Terumi Okada

2013-01-01

To determine the prevalence of mesiodens in deciduous and mixed dentitions and its association with other dental anomalies. Panoramic radiographs of 1,995 orthodontic patients were analyzed retrospectively, obtaining a final sample of 30 patients with mesiodens. The following aspects were analyzed: gender; number of mesiodens; proportion between erupted and non-erupted mesiodens; initial position of the supernumerary tooth; related complications; treatment plan accomplished; and associated dental anomalies. The frequency of dental anomalies in the sample was compared to reference values for the general population using the chi-square test, with a significance level set at 5%. The prevalence of mesiodens was 1.5% more common among males (1.5:1). Most of the mesiodens were non-erupted (75%) and in a vertical position, facing the oral cavity. Extraction of the mesiodens was the most common treatment. The main complications associated with mesiodens were: delayed eruption of permanent incisors (34.28%) and midline diastema (28.57%). From all the dental anomalies analyzed, only the prevalence of maxillary lateral incisor agenesis was higher in comparison to the general population. There was a low prevalence of mesiodens (1.5%) in deciduous and mixed dentition and the condition was not associated with other dental anomalies, except for the maxillary lateral incisor agenesis.

Clinical effectiveness of combining platelet rich fibrin with alloplastic bone substitute for the management of combined endodontic periodontal lesion

PubMed Central

2014-01-01

The term "endo-perio" lesion has been proposed to describe the destructive lesion resulting from inflammatory products found in varying degrees in both the periodontium and the pulpal tissues. In most of the cases, clinical symptoms disappear following successful endodontic therapy. However failure after conventional root canal treatment calls for surgical intervention. A 35 year old male patient with endo-perio lesion in right maxillary lateral incisor was treated with platelet rich fibrin (PRF) and alloplastic bone substitute after conventional endodontic therapy. At the end of 6 months there was gain in clinical attachment, increased radiographic bone fill and reduction in probing depth which was maintained till 18 month follow-up. Present case report aims to evaluate the efficacy of PRF and alloplastic bone substitute in the management of intrabony defect associated with endo-perio lesion in maxillary lateral incisor because the healing potential of PRF and bone graft has not been widely studied in endodontics. The use of PRF allows the clinician to optimize tissue remodelling, wound healing and angiogenesis by the local delivery of growth factors and proteins. The novel technique described here enables the clinician to be benefited from the full regenerative capacity of this autologous biologic material. PMID:24516830

Clinical effectiveness of combining platelet rich fibrin with alloplastic bone substitute for the management of combined endodontic periodontal lesion.

PubMed

Goyal, Lata

2014-02-01

The term "endo-perio" lesion has been proposed to describe the destructive lesion resulting from inflammatory products found in varying degrees in both the periodontium and the pulpal tissues. In most of the cases, clinical symptoms disappear following successful endodontic therapy. However failure after conventional root canal treatment calls for surgical intervention. A 35 year old male patient with endo-perio lesion in right maxillary lateral incisor was treated with platelet rich fibrin (PRF) and alloplastic bone substitute after conventional endodontic therapy. At the end of 6 months there was gain in clinical attachment, increased radiographic bone fill and reduction in probing depth which was maintained till 18 month follow-up. Present case report aims to evaluate the efficacy of PRF and alloplastic bone substitute in the management of intrabony defect associated with endo-perio lesion in maxillary lateral incisor because the healing potential of PRF and bone graft has not been widely studied in endodontics. The use of PRF allows the clinician to optimize tissue remodelling, wound healing and angiogenesis by the local delivery of growth factors and proteins. The novel technique described here enables the clinician to be benefited from the full regenerative capacity of this autologous biologic material.

Esthetic perception of maxillary lateral incisor agenesis treatment by canine mesialization.

PubMed

Mota, Antonino; Pinho, Teresa

2016-03-01

The objective of this study was to evaluate perception of the smile in maxillary lateral incisor agenesis (MLIA) cases treated by mesialization of a canine. Nine images were digitally modified from the same frontal intraoral photograph to simulate various treatment options for space closure in MLIA. A questionnaire was submitted to laypersons (303), general dentists (215), prosthodontists (55) and orthodontists (81). Statistical tests with a significance level of P<0.05 were used. The views of MLIA treatment judged to be most attractive showed unilateral dental and gingival reshaping. All study groups considered the simple dental reshaping of the mesial edge of the canine to be attractive. In the analysis of the images grouped together for both unilateral and bilateral MLIA, the view showing dental and gingival reshaping was considered the most attractive whereas unmodified mesialization was considered the least attractive. Regarding the space closure treatments, although all groups regarded simple dental reshaping of the canine to be attractive, the dental professionals considered gingival and crown reshaping to be more esthetic. In contrast, laypersons were not significantly responsive to this dental and gingival modification as compared to only slight reshaping of the mesial edge of the cusp of the mesialized canine in MLIA. Copyright © 2015 CEO. Published by Elsevier Masson SAS. All rights reserved.

Soft, hard-tissues and pharyngeal airway volume changes following maxillomandibular transverse osteodistraction: Computed tomography and three-dimensional laser scanner evaluation.

PubMed

Bianchi, Francesca Antonella; Gerbino, Giovanni; Corsico, Marina; Schellino, Eleonora; Barla, Niccolò; Verzè, Laura; Ramieri, Guglielmo

2017-01-01

Maxillomandibular transverse osteodistraction (MMTOD) is an alternative approach to the traditional treatment for transverse maxillary and mandibular deficiencies and crowding. The aim was to report soft and hard-tissues changes and airway volume variation. In this study, skeletally mature, non-syndromic patients with transverse maxillary and mandibular hypoplasia, who underwent a MMTOD between 2010 and 2012, were included. Surgical changes were analysed using clinical evaluation, three-dimensional facial surface data and computed tomography analysis before (T0) and after the completion of post-op orthodontic treatment (T1). Nineteen patients (eight males and eleven females; average age: 26.3 years) were enrolled. MMTOD produces facial changes in the cheek, paranasal areas, nasal base and chin. Facial changes are mostly explained by the underlying skeletal movements, which are essentially represented by the transverse enlargement of both the maxilla and the mandible. Following MMTOD, the airway volume and the lateral dimension of the cross-sectional airway increased significantly. MMTOD is a technique that allows an increase in airway volume and in both maxillary and mandibular arch perimeters simultaneously by increasing skeletal width. Facial appearance is improved and a stable occlusion is obtained. Copyright © 2016 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.

A case of squamous cell carcinoma presenting as localized severe periodontitis in the maxillary gingiva.

PubMed

Kim, Ok-Su; Uhm, So-Won; Kim, Sang-Chul; Lee, Bo-Ah; Kim, Ok-Joon; Kim, Young-Joon; Chung, Hyun-Ju

2012-06-01

Squamous cell carcinoma (SCC) is the most common malignant neoplasm of the oral cavity. The clinical features of gingival SCC include alveolar bone loss and erythematous lesion. Therefore, gingival SCC sometimes presents as advanced periodontitis. This case report describes a patient diagnosed with gingival SCC after the extraction of molars presenting as being affected by localized severe periodontitis. The patient was a 61-year-old man whose chief complaint was pain in the left maxillary area. Clinical and radiographic examinations revealed common findings of a periodontal abscess on the left maxillary first and second molars. These teeth were extracted based on a diagnosis of a periodontal abscess. Three months later, a rapidly growing exophytic soft tissue mass was observed, and a biopsy of the mass was performed. According to the biopsy, the final diagnosis was a well-differentiated SCC. The patient was treated with a partial maxillectomy of the left maxilla and split-thickness skin graft. Two years after treatment, the patient remained free of recurrence. Gingival SCC is quite different from other forms of SCC, mimicking localized periodontal disease. Therefore, it can be misdiagnosed as localized periodontal disease and is generally discovered after extracting teeth. Therefore, clinicians must diagnose these lesions carefully and follow up with the patient after tooth extraction.

Comparison of two kinds of bovine bone in maxillary sinus augmentation: a histomorphometric study.

PubMed

Moon, Jee-Won; Sohn, Dong-Seok; Heo, Jeung-Uk; Kim, Jin Sun

2015-02-01

The purpose of this study was to compare the histomorphometric from sinus augmentation with calcium-phosphate nanocrystal-coated bovine bone (Biocera) and anorganic bovine bone matrix (Bio-Oss). Bilateral maxillary sinus augmentations were performed on 5 patients with delayed placement of implants. The lateral bony window was created using a piezoelectric saw, and the sinus membrane was elevated to make a new compartment. Bio-Oss was grafted in one sinus as the control group and Biocera was grafted in the opposite sinus as the test group. The bony window was repositioned over the bone graft. In all cases, samples were taken for biopsy at the time of implant placement, 6 to 8 months after the grafting procedure. Independent t tests were used to examine between-group differences. None of the 5 patients had complications during healing period. Histomorphometrically, the Bio-Oss group showed 28.46% (±5.28%) of newly formed bone. Biocera group showed 29.94% (±8.72%) of newly formed bone. Newly formed bone along inner surface of repositioned bony window area showed more mature and dense bone structure than new bone formed along bone graft. This study revealed that both bovine bone grafts were considered as suitable bone graft materials for maxillary sinus augmentation.

Esthetic evaluation of dental and gingival asymmetries.

PubMed

Fernandes, Liliana; Pinho, Teresa

2015-06-01

The aim of this study was to determine which smile asymmetries were less esthetic, dental or gingival. Laypeople (297), generalists (223), prosthodontists (50) and orthodontists (49), evaluated the esthetics of digitally-modified images taken from the same frontal intra-oral photograph, using the same lips, simulating upper maxillary midline shift, occlusal plane inclination, asymmetric incisal edge and asymmetric gingival migration. The images were later paired into 3 groups. The only ones considered esthetic were the asymmetric incisal edge of the 0.5 mm shorter upper central incisor and the asymmetric gingival migration (2 mm) of the upper central incisor. In the paired images, upper maxillary midline shift vs. occlusal plane inclination, the former was rated less esthetic, while in the asymmetric incisal edge vs. asymmetric gingival migration pair, the latter was considered to be less esthetic. Laypeople and generalists consider smiles more attractive. The only images considered esthetic were the asymmetric incisal edge of the central incisor shorter by 0.5 mm and the 2 mm asymmetric gingival migration of the upper central incisor. In the horizontal plane (maxillary midline shift vs. occlusal plane cant), the dental asymmetries were considered less esthetic than the gingival asymmetries. However, in the vertical plane (asymmetric incisal edge vs. asymmetric gingival migration) the opposite was recorded. Copyright © 2015 CEO. Published by Elsevier Masson SAS. All rights reserved.

Correlation between Maxillary Canine Calcification and Skeletal Maturation.

PubMed

Kumar, Sushil; Roy, Abhishek Singha; Garg, Ankit; Hamid, Saeed Bin; Tyagi, Sumit; Kumar, Atish

2017-05-01

Skeletal maturation assessment has a great role in many health professions especially in Orthodontics & Dentofacial Orthopedics. Functional appliances have proved to be more effective when used at the peak of mandibular growth, rather than before. The aim of this study was to evaluate whether the calcification stages of permanent maxillary canine are useful to assess skeletal maturity. In this cross-sectional study, samples were derived from panoramic radiographs and lateral cephalograms of 300 subjects (137 males and 163 females) with their age ranging from 9 to 18 years. Dental maturity {Demirjian Index (DI)} and skeletal maturity {Cervical Stages (CS)} were assessed from radiographs. The Pearson chi-square test (χ 2 ) and Sakoda adjusted Pearson contingency coefficient (C*) were calculated to determine the correlation between DI and CS. A highly significant association (C* = 0.851, p <.001for males and 0.879, p <.001 for females) was found between DI and CS. DI stage E coincided with CS2 (pre-peak of pubertal growth spurt) & DI stage F coincided with CS3 (peak of pubertal growth spurt) for all the subjects. DI stage H corresponded to CS5 and CS6 (end of peak of pubertal growth spurt). A highly significant association was found between DI and CS. Maxillary canine DI stages could be useful to assess skeletal maturity.

Topographic analysis of maxillary premolars and molars and maxillary sinus using cone beam computed tomography.

PubMed

Yoshimine, Shin-Ichiro; Nishihara, Kazuhide; Nozoe, Etsuro; Yoshimine, Masako; Nakamura, Norifumi

2012-12-01

This study evaluated the anatomical characteristics of the maxillary premolars and molars and the maxillary sinus using cone beam computed tomography (CBCT) for dental implant treatment. Ten linear items and 1 angular item on 30 sites in 30 patients were measured on 3-dimensional computed tomography images using CBCT. The vertical relationship between the maxillary sinus and the maxillary molars was classified into 5 categories. The horizontal thickness of the buccal alveolar bone was thinnest on the maxillary first premolars, and the horizontal thickness of the palatal alveolar bone was thickest on the maxillary second molars. Type II was most common on the maxillary first molars. The internal angle at the maxillary premolars was significantly greater than that at the maxillary molars. The internal angle and vertical distance between the apex of the roots and the maxillary sinus floor showed a positive correlation on the maxillary first premolars (P = 0.003). For the selection of an appropriate approach on dental implant treatment, the evaluation of maxillary premolars and molars using of CBCT can be recommended.

Increased occurrence of dental anomalies associated with infraocclusion of deciduous molars.

PubMed

Shalish, Miriam; Peck, Sheldon; Wasserstein, Atalia; Peck, Leena

2010-05-01

To test the null hypothesis that there is no relationship between infraocclusion and the occurrence of other dental anomalies in subjects selected for clear-cut infraocclusion of one or more deciduous molars. The experimental sample consisted of 99 orthodontic patients (43 from Boston, Mass, United States; 56 from Jerusalem, Israel) with at least one deciduous molar in infraocclusion greater than 1 mm vertical discrepancy, measured from the mesial marginal ridge of the first permanent molar. Panoramic radiographs and dental casts were used to determine the presence of other dental anomalies, including agenesis of permanent teeth, microdontia of maxillary lateral incisors, palatally displaced canines (PDC), and distal angulation of the mandibular second premolars (MnP2-DA). Comparative prevalence reference values were utilized and statistical testing was performed using the chi-square test (P < .05) and odds ratio. The studied dental anomalies showed two to seven times greater prevalence in the infraocclusion samples, compared with reported prevalence in reference samples. In most cases, the infraoccluded deciduous molar exfoliated eventually and the underlying premolar erupted spontaneously. In some severe phenotypes (10%), the infraoccluded deciduous molar was extracted and space was regained to allow uncomplicated eruption of the associated premolar. Statistically significant associations were observed between the presence of infraocclusion and the occurrence of tooth agenesis, microdontia of maxillary lateral incisors, PDC, and MnP2-DA. These associations support a hypothesis favoring shared causal genetic factors. Clinically, infraocclusion may be considered an early marker for the development of later appearing dental anomalies, such as tooth agenesis and PDC.

Intrahemispheric white matter asymmetries: the missing link between brain structure and functional lateralization?

PubMed

Ocklenburg, Sebastian; Friedrich, Patrick; Güntürkün, Onur; Genç, Erhan

2016-07-01

Hemispheric asymmetries are a central principle of nervous system architecture and shape the functional organization of most cognitive systems. Structural gray matter asymmetries and callosal interactions have been identified as contributing neural factors but always fell short to constitute a full explanans. Meanwhile, recent advances in in vivo white matter tractography have unrevealed the asymmetrical organization of many intrahemispheric white matter pathways, which might serve as the missing link to explain the substrate of functional lateralization. By taking into account callosal interactions, gray matter asymmetries and asymmetrical interhemispheric pathways, we opt for a new triadic model that has the potential to explain many observations which cannot be elucidated within the current frameworks of lateralized cognition.

Orthodontic Treatment of Maxillary Incisors with Severe Root Resorption Caused by Bilateral Canine Impaction in a Class II Division 1 Patient.

PubMed

Chang, Na-Young; Park, Jae Hyun; Lee, Mi-Young; Cho, Jin-Woo; Cho, Jin-Hyoung; An, Ki-Yong; Chae, Jong-Moon

2016-01-01

This case report shows the successful alignment of bilateral impacted maxillary canines. A 12-year-old male with the chief complaint of the protrusion of his maxillary anterior teeth happened to have bilateral maxillary canine impaction on the labial side of his maxillary incisors. Four maxillary incisors showed severe root resorption because of the impacted canines. The patient was diagnosed as skeletal Class II malocclusion with proclined maxillary incisors. The impacted canine was carefully retracted using sectional buccal arch wires to avoid further root resorption of the maxillary incisors. To distalize the maxillary dentition, two palatal miniscrews were used. After 25 months of treatment, the maxillary canines were well aligned without any additional root resorption of the maxillary incisors.

Dental anomalies: prevalence and associations between them in a large sample of non-orthodontic subjects, a cross-sectional study.

PubMed

Laganà, G; Venza, N; Borzabadi-Farahani, A; Fabi, F; Danesi, C; Cozza, P

2017-03-11

To analyze the prevalence and associations between dental anomalies detectable on panoramic radiographs in a sample of non-orthodontic growing subjects. For this cross-sectional study, digital panoramic radiographs of 5005 subjects were initially screened from a single radiographic center in Rome. Inclusion criteria were: subjects who were aged 8-12 years, Caucasian, and had good diagnostic quality radiographs. Syndromic subjects, those with craniofacial malformation, or orthodontic patients were excluded and this led to a sample of 4706 subjects [mean (SD) age = 9.6 (1.2) years, 2366 males and 2340 females]. Sample was subsequently divided into four subgroups (8, 9, 10, and 11-12 year-old groups). Two operators examined panoramic radiographs to observe the presence of common dental anomalies. The prevalence and associations between dental anomalies were also investigated. The overall prevalence of dental anomalies was 20.9%. Approximately, 17.9% showed only one anomaly, 2.7% two anomalies, while only 0.3% had more than two anomalies. The most frequent anomalies were the displacement of maxillary canine (7.5%), hypodontia (7.1%), impacted teeth (3.9%), tooth ankylosis (2.8%), and tooth transposition (1.4%). The lower right second premolar was the most frequent missing teeth; 3.7% had only one tooth agenesis, and 0.08% had six or more missing tooth (Oligodontia). Mesiodens was the most common type of supernumerary tooth (0.66%). Two subjects had taurodontic tooth (0.04%). Tooth transpositions and displacement of maxillary canine were seen in 1.4 and 7.5%, retrospectively (approximately 69 and 58% were in the 8 and 9 year-old groups, retrospectively). Significant associations were detected between the different dental anomalies (P < .05). The results of our study revealed significant associations among different dental anomalies and provide further evidences to support common etiological factors.

Asymmetric severe skeletal Class II division 1 patient with temporomandibular joint disorder treated with zygomatic anchorage devices and Ni-Ti alloy wires.

PubMed

Ishida, Takayoshi; Ono, Takashi

2014-09-01

To describe the orthodontic treatment of a nongrowing 30-year-old woman with asymmetric severe skeletal Class II malocclusions (asymmetric Angle Class II), large overjet (16 mm), large overbite (8 mm), two congenitally missing mandibular incisors (presenting a deciduous anterior tooth), and signs and symptoms of temporomandibular joint disorder (TMD). We used novel improved super-elastic Ni-Ti alloy wires (ISWs) combined with Ni-Ti alloy coil springs, power hooks, and a zygomatic implant as reinforced anchorage to provide a constant and continuous mild force to the dentition. We successfully distalized maxillary molars, premolars, and retracted anterior teeth and corrected the asymmetric Angle Class II molar relationship using this system of zygomatic anchorage in conjunction with ISWs, Ni-Ti alloy open-coil springs, and crimpable power hook. The maxillary molars were distalized, and postero-occlusal relationships were improved to achieve Class I canine and molar relationships on both sides. Intrusion of the upper molars made the mandibular plane close. Ideal overbite and overjet relationships were established. Facial esthetics were improved with decreased upper and lower lip protrusion, and no symptoms of TMD were observed after treatment. The orthodontic treatment described here is a promising anchorage technique alternative to traditional techniques to improve severe skeletal Class II with TMD.

Combined endodontic-periodontic treatment of a palatal groove: a case report.

PubMed

Schwartz, Scott A; Koch, Michael A; Deas, David E; Powell, Charles A

2006-06-01

The palatal groove is a developmental anomaly that predisposes the tooth involved to a severe periodontal defect. When further complicated by pulp necrosis, these grooves often present a diagnostic and treatment planning challenge that requires an interdisciplinary treatment approach. This case report describes the successful collaborative management of a maxillary lateral incisor with an extensive palatal groove using a combination of nonsurgical endodontic therapy, odontoplasty, and periodontal regenerative techniques.

[Radiographic study of maxillary sinus associated with molars in adult].

PubMed

Hu, Zhi; Sun, Daming; Zhou, Quansheng; Wang, Yuli; Gu, Jingcheng; Han, Yaohua

2014-12-01

to explore the relationship between the maxillary sinus volume and the amount of alveolar bone, and the effect of molar loss upon the maxillary sinus was further analyzed,by measuring adult maxillary sinus volume, sinus ridge distance, and calculating the gasification coefficient of maxillary sinus. One hundred and ninety cases (361 maxillary sinus) with CT examinations were collected, they were divided into group A and group B, 121 cases (242 maxillary sinus) of normal subjects served as group A, 42 cases (65 maxillary sinus) with molar part off were B group, in which 31 maxillary sinus with a molar loss were group B1,22 maxillary sinus with two molar loss were B2 group,12 maxillary sinus with three molar loss (one molar remains) were B3 group, 27 cases (54 maxillary sinus) with upper teeth off were C group. Bymeasureing the maxillary sinus volume, sinus ridge distance and the size of the maxillary sinus, calculating the gasification coefficient, we analyzed the relationship between maxillary volume and sinus ridge distance, and comparatively analyzed the differences among the three groups in the size, gasification coefficient, volume of maxillary sinus and sinus ridge distance. In the normal group,the volume of maxillary sinus and sinus ridge distance had a correlation coefficient of -0. 63,(P< 0.05); Sinus ridge distance in group A was larger than the other two groups (P<0.05), and larger in B group than in C group (P<0. 05), anteroposterior maxillary sinus diameter and reft-right diameter in C group was greater than in A group and B group(P<0.05), group C gasification coeffiecent was less than A group and B group (P<0. 05). The volume of maxillary sinus is negatively correlated with the amont of alveolar bone; Upper teeth's shedding promotes maxillary sinus deformation; Maxiuary sinus volume has a tendency to decrease.

Comparison of short-term effects between face mask and skeletal anchorage therapy with intermaxillary elastics in patients with maxillary retrognathia.

PubMed

Ağlarcı, Cahide; Esenlik, Elçin; Fındık, Yavuz

2016-06-01

The aim of this study was to compare the short-term dental and skeletal effects of a face mask (FM) with those of skeletal anchorage (SA) therapy with intermaxillary elastics in prepubertal patients with skeletal Class III malocclusion. Fifty patients with skeletal Class III malocclusion and maxillary deficiency were divided into two groups. In the FM group, an FM was applied by a bite plate with a force of 400g for each side. In the SA group, mini-plates were placed between mandibular lateral incisors and canines, and mini-implants were inserted between maxillary second premolars and first molars. A bite plate was inserted into the upper arch, and Class III elastics were applied with a force of 200g between each mini-plate and mini-implant. Mean treatment durations were 0.52±0.09 years for FM and 0.76±0.09 years for SA. After the treatment, statistically significant increases in SNA°, ANB°, A-y, 1-NA, SnGoGn°, Co-A, Co-Gn, and A-Nperp, and reductions in SNB° and FH┴N-Pg were observed in both groups, and these changes were similar in both groups. In the FM group, 1-NB decreased significantly, and in the SA group, it increased significantly (P < 0.05). The undesired dentoalveolar effects of the FM treatment were eliminated with SA treatment, except with regard to lower incisor inclination. Favourable skeletal outcomes can be achieved by SA therapies, which could be an alternative to the extraoral appliances frequently applied to treat skeletal Class III patients with maxillary deficiency. © The Author 2015. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Three-dimensional analysis of the change in the curvature of the smiling line following orthodontic treatment in incisor class II division 1 malocclusion.

PubMed

Mah, Michael; Tan, Wei Chuan; Ong, Sim Heng; Chan, Yiong Huak; Foong, Kelvin

2014-12-01

To investigate the different effects of changes in the occlusal plane, incisors inclination, and maxillary intercanine width on the curvature of the smiling line. Records of 46 subjects (28 females and 18 males, mean age 16.6 ± 4.2 years) with incisor class II division 1 malocclusions were selected. All subjects had four premolar extractions and were treated with preadjusted edgewise appliances. Pre- and post-treatment maxillary dental digital models were virtually aligned via corresponding landmarks to the respective lateral cephalograms. Subsequent two-dimensional superimposition of the aligned cephalograms facilitated the three-dimensional superimposition of the pre- and post-treatment models. This process allowed the quantification of the curvature from a frontal perspective of the models. The change in curvature was then correlated with changes in the cephalometric inclination of the anterior occlusal plane (AOP), functional occlusal plane (FOP), maxillary central incisor (U1), and the intercanine width. Orthodontic correction in this sample resulted in the clockwise rotation of the anterior occlusal plane (5.84 degrees), reduction in proclination of the incisors (-14.39 degrees), increase in intercanine width (2.48mm), and a corresponding increase in the curvature of the smiling line (6.83 degrees). The change in curvature of the smiling line in these subjects was found to be related more significantly to the magnitude of difference in the inclination between the pre-treatment AOP and FOP than to the change in the inclination of the maxillary incisors. With orthodontic treatment, the smiling line can be correlated with cephalometric data to improve or maintain the curvature. © The Author 2013. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Camouflage treatment of skeletal Class III malocclusion with multiloop edgewise arch wire and modified Class III elastics by maxillary mini-implant anchorage.

PubMed

He, Shushu; Gao, Jinhui; Wamalwa, Peter; Wang, Yunji; Zou, Shujuan; Chen, Song

2013-07-01

To evaluate the effect of the multiloop edgewise arch wire (MEAW) technique with maxillary mini-implants in the camouflage treatment of skeletal Class III malocclusion. Twenty patients were treated with the MEAW technique and modified Class III elastics from the maxillary mini-implants. Twenty-four patients were treated with MEAW and long Class III elastics from the upper second molars as control. Lateral cephalometric radiographs were obtained and analyzed before and after treatment, and 1 year after retention. Satisfactory occlusion was established in both groups. Through principal component analysis, it could be concluded the anterior-posterior dental position, skeletal sagittal and vertical position, and upper molar vertical position changed within groups and between groups; vertical lower teeth position and Wits distance changed in the experimental group and between groups. In the experimental group, the lower incisors tipped lingually 2.7 mm and extruded 2.4 mm. The lingual inclination of the lower incisors increased 3.5°. The mandibular first molars tipped distally 9.1° and intruded 0.4 mm. Their cusps moved 3.4 mm distally. In the control group, the upper incisors proclined 3°, and the upper first molar extruded 2 mm. SN-MP increased 1.6° and S-Go/N-ME decreased 1. The MEAW technique combined with modified Class III elastics by maxillary mini-implants can effectively tip the mandibular molars distally without any extrusion and tip the lower incisors lingually with extrusion to camouflage skeletal Class III malocclusions. Clockwise rotation of the mandible and further proclination of upper incisors can be avoided. The MEAW technique and modified Class III elastics provided an appropriate treatment strategy especially for patients with high angle and open bite tendency.

Cone-beam computed tomography analysis of the vestibular surgical pathway to the palatine root of the maxillary first molar

PubMed Central

Kalender, Atakan; Aksoy, Umut; Basmaci, Fatma; Orhan, Kaan; Orhan, Ayse Isil

2013-01-01

Objective: The aim of this study was to evaluate the anatomical distance between apices of the palatine root of the maxillary first molars to the buccal bone plate to identify the vestibular surgical pathway in a Turkish adult population using cone-beam computed tomography (CBCT) images. Methods: CBCT scans of 107 (48 male and 59 female) patients were retrospectively analyzed. The overall mean age was 38.6 years. The distance between the vestibular cortex and vestibular side of the palatine root was measured for 192 maxillary first molars both on axial images parallel to the palatal plane and on reformatted cross-sectional images. A Pearson’s chi square test and Mann-Whitney U-test were performed to evaluate differences among age, localization, and measurements. Differences were considered statistically significant at P<.05. Results: The mean distance between the buccal cortex and the buccal side of the palatine root of the superior first molar in both male and female patients was 10.13 and 9.70 mm, respectively. The incidence of interposition of the lateral recess of the maxillary sinus between the roots was 42.2% and 49% in men and women, respectively. Statistically significant sex-related differences were found in the vestibular surgical pathway (P<.05). Conclusions: For precise planning of endodontic surgery, it is crucial to determine the exact dimensions and location of the periapical lesion, as well as its relationship with the roots and other neighboring anatomical structures. CBCT can be a powerful tool for the evaluation of surgical cases in three dimensions with less ionizing radiation and better avoidance of complications during surgery. PMID:23408714

Improvement of Implant Placement after Bone Augmentation of Severely Resorbed Maxillary Sinuses with 'Tent-Pole' Grafting Technique in Combination with rhBMP-2.

PubMed

Zhang, Qiao; Zhang, Li Li; Yang, Yang; Lin, Yi Zhen; Miron, Richard J; Zhang, Yu Feng

To study the clinical effect of short implant placement using osteotome sinus floor elevation technique and tent-pole grafting technique with recombinant human bone morphogenetic protein 2 (rhBMP-2) in severely resorbed maxillary area. Eleven patients with insufficient bone height in the posterior maxillary area were included. According to the native bone height and crown height space (CHS), the patients were divided into two groups: immediate placement of short implants with simultaneous bone augmentation (group A, 5 patients) and delayed dental implant placement (4 to 6 months) after bone augmentation. The rhBMP-2 was added into a deproteinised bovine bone mineral (DBBM) bone grafting material to shorten the treatment procedure and enhance the final effect of bone augmentation in both groups. Tent-pole grafting technique was applied for vertical bone augmentation in group B (6 patients). The success rate of the implants placed was 100% in both groups. In group A, the short implants treatment was successful, with a vertical gain of 1.5 to 6.4 mm in bone height after 4 to 6 months. In group B, the tent-pole grafting procedure in combination with DBBM and rhBMP-2 increased vertical bone height between 3.1 and 8.1 mm, an optimistic and adequate increase for implant placement. This bone increase was maintained following implant placement and final crown placement in the maxillary region (3.5 to 7.3 mm). The tent-pole grafting technique was a viable alternative choice to lateral sinus floor elevation in cases with excessive CHS. The application of rhBMP-2 with a shortened treatment time demonstrated positive outcomes in sinus floor augmentation procedures.

Skeletal stability and complications in transantral maxillary distraction in patients with cleft lip and palate.

PubMed

Nkenke, Emeka; Vairaktaris, Elefterios; Hanke, Sebastian; Hoffmann, Bettina; Schlittenbauer, Tilo

2014-01-01

The current prospective study aimed at assessing skeletal stability and complications arising from transantral maxillary distraction adopted for advancements of less than 12 mm in patients with cleft lip, alveolus, and palate malformations.The recruited patients with cleft lip, alveolus, and palate were followed up for 12 months. Lateral skull radiographs were obtained before surgery (T0), at the end of the activation period of the distractors (T1), and after completion of the follow-up interval (T2). Length and height of the maxilla were assessed at the different points of time. The relapse rate of maxillary advancement was calculated. Complications such as infections, distractor breakage and loosening, nonunions, and the need for reoperation were documented.Seven patients were included in this study (mean [SD] age, 19.5 [2.6] y). The length of the maxilla significantly increased by 6.4 ± 1.1 mm at T1 (P = 0.018) but showed a significant relapse by 7.5% at T2 (P = 0.018). As a complication, a case of infection of the cheek occurred during the consolidation period, which could be treated conservatively. In an additional patient, there was a loosening of a distractor at the end of the distraction period, which required reoperation with conventional fixation of the maxilla in the intended position. At the time of removal of the distractors and the conventional osteosynthesis plates, no cases of nonunion could be identified.It seems that the low horizontal relapse rate of transantral maxillary distraction in patients with cleft lip and palate outweighs the possible complications of this procedure in cases of limited distances of advancement of less than 12 mm.

Internal maxillary distraction with a new bimalar device.

PubMed

Kahn, David M; Broujerdi, Joseph; Schendel, Stephen A

2008-04-01

Distraction osteogenesis of the Le Fort I segment is advocated for patients who require significant advancement of the maxilla or who have a soft tissue envelope compromised by scar tissue. We present a technique for maxillary distraction using an interconnecting intraoral device anchored to the malar prominences above the osteotomy and either the maxilla and/or the dentition below the level of the osteotomy. Ten patients with nonsyndromic cleft lip and palate, mean age of 18, underwent Le Fort I maxillary distraction osteogenesis for management of maxillary hypoplasia. A Le Fort I osteotomy is performed and a Spectrum Intraoral Midface Multi-Vector Distractor (OsteoMed, Addison, TX) is placed leaving a 1 mm to 2 mm distraction gap. After a 2 to 4 day latency period, distraction begins at a rate of 1 mm a day. Once the desired occlusion is achieved the device is left in place for a minimum of 2 months for consolidation. Preoperative Sella-Nasion-A point measurements from lateral cephalograms averaged 74 degrees (range, 70-76 degrees). Postoperative Sella-Nasion-A point averaged 81 degrees (range, 75-89 degrees). Preoperative overjet averaged -7.4 mm (range, -3 to -13 mm). Postoperative overjet averaged 2.6 mm (range, 1-3 mm). Average distraction was 9 mm (range, 6-16 mm). The average vertical movement was 7.2 mm in an inferior direction (range, 0-15 mm). The results remained stable at a follow-up of 30 months. We report on distraction of the Le Fort I segment using an internal device. The device design allows the forces of distraction to be shared across a larger surface area delivering a uniform and reliable vector of distraction with increased stability.

Rehabilitation of postrior atrophic edentulous jaws: prostheses supported by 5 mm short implants or by longer implants in augmented bone? One-year results from a pilot randomised clinical trial.

PubMed

Esposito, Marco; Pellegrino, Gerardo; Pistilli, Roberto; Felice, Pietro

2011-01-01

To evaluate whether 5 mm short dental implants could be an alternative to augmentation with anorganic bovine bone and placement of at least 10 mm long implants in posterior atrophic jaws. Fifteen patients with bilateral atrophic mandibles (5-7 mm bone height above the mandibular canal), and 15 patients with bilateral atrophic maxillae (4-6 mm bone height below the maxillary sinus) and bone thickness of at least 8 mm, were randomised according to a splitmouth design to receive one to three 5 mm short implants or at least 10 mm long implants in augmented bone. Mandibles were vertically augmented with interpositional bone blocks and maxillary sinuses with particulated bone via a lateral window. Implants were placed after 4 months, submerged and loaded, after 4 months, with provisional prostheses. Four months later, definitive provisionally cemented prostheses were delivered. Outcome measures were: prosthesis and implant failures, any complication and peri-implant marginal bone level changes. In 5 augmented mandibles, the planned 10 mm long implants could not be placed and shorter implants (7 and 8.5 mm) had to be used instead. One year after loading no patient dropped out. Two long (8.5 mm in the mandible and 13 mm in the maxilla) implants and one 5 mm short maxillary implant failed. There were no statistically significant differences in failures or complications. Patients with short implants lost on average 1 mm of peri-implant bone and patients with longer implants lost 1.2 mm. This difference was statistically significant. This pilot study suggests that 1 year after loading, 5 mm short implants achieve similar if not better results than longer implants placed in augmented bone. Short implants might be a preferable choice to bone augmentation since the treatment is faster, cheaper and associated with less morbidity, however their long-term prognosis is unknown.

Skeletal and dental changes following surgically assisted rapid palatal expansion.

PubMed

Byloff, Friedrich K; Mossaz, Claude F

2004-08-01

The purpose of this study was to analyse the changes produced by surgically assisted rapid palatal expansion (SARPE) longitudinally on 14 patients aged between 18 and 41 years. A pre-fabricated Hyrax appliance was cemented prior to the surgical intervention, which consisted of a maxillary buccal corticotomy with pterygoid separation. Models and postero-anterior (PA) headfilms were taken before expansion (T1), at the end of expansion (T2), at the end of retention (T3) and at least 1 year post-surgery (T4). Overall expansion and relapse were measured directly on the casts. Transverse distances increased more at the first molars (8.7 mm) and premolars (8.1 and 8.3 mm) than in the canine (5.2 mm) and second molar (5.5 mm) region. Minimal relapse occurred during the retention phase. The arch width decreased more during the post-retention period, with more pronounced reduction at the teeth used as anchorage during the expansion procedure (-2.0 mm for the first premolars and -2.6 mm for the first molars). The mean total dental relapse was 28 per cent. PA radiographic analysis for angular changes showed 9.6 degrees of lateral tipping per side during expansion. One-third of this movement relapsed during the retention period (-3.3 degrees) and this trend (-6.0 degrees) continued during the post-retention phase to reach practically the original value at T1. Skeletal changes monitored on the PA headfilms were minimal with great individual variation. The mean expansion measured in the proximity of the osteotomy site was only 1.3 mm. From this amount, 0.4 mm was lost during the retention and post-retention periods. Based on these findings, it appears that maxillary skeletal expansion by SARPE is mainly a lateral rotation of the two maxillary halves with only minimal horizontal translation.

Morphological impact on patients of maxillomandibular advancement surgery for the treatment of obstructive sleep apnea-hypopnea syndrome.

PubMed

Beranger, Thibaut; Garreau, Emilie; Ferri, Joël; Raoul, Gwenael

2017-03-01

The aim of this study is to evaluate the experience of patients who have benefited from maxillomandibular advancement surgery for the treatment of obstructive sleep apnea-hypopnea syndrome (OSAHS), and also the morphological modifications measured on pre- and postoperative lateral headfilms. Twenty-three patients aged 24 to 64 (M=46.8) who had undergone bimaxillary advancement osteotomy for the treatment of OSAHS filled in a questionnaire concerning their overall satisfaction following surgery, the modification of their facial appearance as perceived by themselves and their family and friends, the change in their smile, and the slimmer and more youthful appearance of their face. Measurements of bone and skin points were also performed on lateral cephalograms before and after surgery so as to assess the advancement of the bony bases (maxillary, mandibular and chin advancement) and the impact on soft tissue by analysis of the skin profile. A total of 91.3% of the patients were satisfied overall following the surgical procedure; 78.3% considered that their faces were improved or unchanged; 39.1% found their faces slimmer and 34.8% thought they looked more youthful. Average maxillary, mandibular and chin advancements with respect to the base of the skull were, respectively, 7.4mm, 11.1mm and 14.1mm. Advancement of the stomion point with respect to the Frankfurt plane was 8.3mm on average, reflecting a significant forward movement of the upper and lower lips. Despite greater maxillary and mandibular advancements than in traditional orthognathic surgery, patients reacted positively to these morphological changes, considering in more than a third of cases that their faces looked slimmer or more youthful. It can thus be concluded that overall satisfaction is high, with a morphological impact that is satisfactory and well-accepted by patients postoperatively. Copyright © 2016 CEO. Published by Elsevier Masson SAS. All rights reserved.

Invasive cervical resorption and the oro-facial cleft patient: a review and case series.

PubMed

O'Mahony, A; McNamara, C; Ireland, A; Sandy, J; Puryer, J

2017-05-12

Introduction Invasive cervical resorption (ICR) has an unknown aetiology, yet it exhibits very aggressive behaviour compared with typical external root resorption, posing a high risk of tooth loss.Aim To investigate the number of patients at the Dublin Cleft Prosthodontic Department with an oro-facial cleft who experienced ICR and to identify any possible aetiological factors.Materials and method A retrospective investigation of all oro-facial cleft patients treated at the Dublin Cleft Prosthodontic Department, St James's Hospital, Dublin. All patients' clinical and radiological records were reviewed. Patients where tooth loss became inevitable due to Class 4 ICR were analysed.Results From 588 oro-facial cleft patients, 14 (2.38%) patients with ICR were identified. Of these eight (57%) were female and six (43%) were male. Mean age at diagnosis was 28 years (range = 16-49 years). Cleft type: six (42.1%) unilateral cleft lip and palate, eight (57.9%) bilateral cleft lip and palate. Seventeen ICR affected teeth in total, with eleven (65%) maxillary central incisors, two (12%) maxillary lateral incisors, four (23%) maxillary canines, and one (7%) central, lateral and canine affected. Some, (N = 10, 71.4%) presented with ICR resulting in immediate tooth loss. Other patients (N = 4, 28.6%) developed ICR during or following prosthodontic treatment at the Cleft Centre. Tooth loss for this cohort, though not immediate, was inevitable. All had undergone fixed orthodontic appliance treatment and twelve had received dento-alveolar bone grafts. A number (N = 7, 50%) had undergone osteotomy, two (14%) had received night guard vital dental whitening and one had a history of trauma.Conclusions ICR, given its aggressive nature and ill-understood aetiology, poses significant treatment challenges. The most severe form of ICR (Class 4) leads inevitably to tooth loss. The slow-moderate progression of ICR may explain the late presentation found in this study, reinforcing the importance of long-term follow-up of this special dental care group.

Torvosaurus gurneyi n. sp., the Largest Terrestrial Predator from Europe, and a Proposed Terminology of the Maxilla Anatomy in Nonavian Theropods

PubMed Central

Hendrickx, Christophe; Mateus, Octávio

2014-01-01

The Lourinhã Formation (Kimmeridgian-Tithonian) of Central West Portugal is well known for its diversified dinosaur fauna similar to that of the Morrison Formation of North America; both areas share dinosaur taxa including the top predator Torvosaurus, reported in Portugal. The material assigned to the Portuguese T. tanneri, consisting of a right maxilla and an incomplete caudal centrum, was briefly described in the literature and a thorough description of these bones is here given for the first time. A comparison with material referred to Torvosaurus tanneri allows us to highlight some important differences justifying the creation of a distinct Eastern species. Torvosaurus gurneyi n. sp. displays two autapomorphies among Megalosauroidea, a maxilla possessing fewer than eleven teeth and an interdental wall nearly coincidental with the lateral wall of the maxillary body. In addition, it differs from T. tanneri by a reduced number of maxillary teeth, the absence of interdental plates terminating ventrally by broad V-shaped points and falling short relative to the lateral maxillary wall, and the absence of a protuberant ridge on the anterior part of the medial shelf, posterior to the anteromedial process. T. gurneyi is the largest theropod from the Lourinhã Formation of Portugal and the largest land predator discovered in Europe hitherto. This taxon supports the mechanism of vicariance that occurred in the Iberian Meseta during the Late Jurassic when the proto-Atlantic was already well formed. A fragment of maxilla from the Lourinhã Formation referred to Torvosaurus sp. is ascribed to this new species, and several other bones, including a femur, a tibia and embryonic material all from the Kimmeridgian-Tithonian of Portugal, are tentatively assigned to T. gurneyi. A standard terminology and notation of the theropod maxilla is also proposed and a record of the Torvosaurus material from Portugal is given. PMID:24598585

MISSE-6 hardware

NASA Image and Video Library

2009-09-02

ISS020-E-037371 (1 Sept. 2009) --- A close-up view of a Materials International Space Station Experiment (MISSE-6) on the exterior of the Columbus laboratory is featured in this image photographed by a space walking astronaut during the STS-128 mission’s first session of extravehicular activity (EVA). MISSE collects information on how different materials weather in the environment of space. MISSE was later placed in Space Shuttle Discovery’s payload bay for its return to Earth. A portion of a payload bay door is visible in the background. The blackness of space and Earth’s horizon provide the backdrop for the scene.

Horizontal root fracture treated with MTA, a case report with a 10-year follow-up.

PubMed

Roig, Miguel; Espona, José; Mercadé, Montse; Duran-Sindreu, Fernando

2011-12-01

Root fractures occur more frequently in fully erupted permanent teeth with closed apices in which the completely formed root is solidly supported in the bone and periodontium. The consequences can be complex because of combined damage to the pulp, dentine, cementum, bone, and periodontium. Management of horizontal root fractures and lateral luxation depends on several factors, with the result that various clinical modalities have been suggested. This case report describes the treatment and 10-year follow-up of two maxillary central incisors, one with horizontal root fracture and the other with lateral luxation, treated with mineral trioxide aggregate and root canal treatment, respectively. © 2011 John Wiley & Sons A/S.

Aging of the midface bony elements: a three-dimensional computed tomographic study.

PubMed

Shaw, Robert B; Kahn, David M

2007-02-01

The face loses volume as the soft-tissue structures age. In this study, the authors demonstrate how specific bony aspects of the face change with age in both men and women and what impact this may have on the techniques used in facial cosmetic surgery. Facial bone computed tomographic scans were obtained from 60 Caucasian patients (30 women and 30 men). The authors' study population consisted of 10 male and 10 female subjects in each of three age categories. Each computed tomographic scan underwent three-dimensional reconstruction with volume rendering, and the following measurements were obtained: glabellar angle (maximal prominence of glabella to nasofrontal suture), pyriform angle (nasal bone to lateral inferior pyriform aperture), and maxillary angle (superior to inferior maxilla at the articulation of the inferior maxillary wing and alveolar arch). The pyriform aperture area was also obtained. The t test was used to identify any trends between age groups. The glabellar and maxillary angle in both the male and female subjects showed a significant decrease with increasing age. The pyriform angle did not show a significant change between age groups for either sex. There was a significant increase in pyriform aperture area from the young to the middle age group for both sexes. These results suggest that the bony elements of the midface change dramatically with age and, coupled with soft-tissue changes, lead to the appearance of the aged face.

Relationship between post-extraction pain and acute pulpitis: a randomised trial using third molars.

PubMed

Zhang, Wei; Dai, Yong-Bo; Wan, Peng-Cheng; Xu, Dong-Dong; Guo, Yi; Li, Zhi

2016-12-01

The aim of the present study was to examine the relationship between post-extraction pain and acute pulpitis in third molars. This study was a randomised controlled trial. Sixty patients requiring removal of a single maxillary third molar with acute pulpitis were included and randomly divided into two groups: group A (n = 30); and group B (n = 30). In group A, third molars were directly extracted, and group B received endodontic therapy (pulp chamber opening and drainage) and underwent extraction 24 hours later, aiming to eliminate the acute inflammation. Another 30 patients requiring removal of a single maxillary third molar and with the same inclusion criteria but without caries or acute pulpitis were recruited into group C, in which the maxillary third molars were also directly extracted. The level of postoperative pain reported each day among the three groups was statistically evaluated. On the first, second and third days after surgery, there was a statistically significant difference between group A and group B and between group A and group C, but there was no statistically significant difference between group B and group C. The results of the present study indicate that there is more pain when third molars with acute pulpitis are directly removed compared with the pain level of the removal of third molars without acute pulpitis. © 2016 FDI World Dental Federation.

Stability Following Combined Maxillary and Mandibular Osteotomies Treated with Rigid Internal Fixation.

DTIC Science & Technology

1987-06-01

splint and verified seating of the mandibular condyles in the glenoid fossae, the maxilla was initially secured with bilaterally placed Steinmann pins...mandible upon closure for approximately 2 to 4 weeks. Cephalometrlc Analysis * . Each patient had standardized lateral cephalometric radiographs taken (Quint... analysis was perormed by standard decripve evaluation using Statview 512+ program.4 5 Tre changes in each parameter from T1T2, T2-T3, TI-T3, (Fig. 1) as

The Effects of High Velocity Variable Mass Projectiles on the Maxillofacial Complex,

DTIC Science & Technology

1980-06-01

mandibular joint and infra- temporal space. BOHYSICS DIVISION 4 . 4Figure 12: Two grain sphere impacted at 5637 fps into the right Zygoma. Green stick...impac- ted at mandibular symphy- sis, lateral view. Avulsion of anterior man- dible and fractures of maxilla and maxillary mol- ars are seen at A...Fractures of the coronoid process, Zygoma and articu- lar eminence are clearly evident. Multiple small fragments can be seen in the area of the temporo

Comparison of ropivacaine and articaine with epinephrine for infiltration anaesthesia in dentistry - a randomized study.

PubMed

Krzemiński, T F; Gilowski, L; Wiench, R; Płocica, I; Kondzielnik, P; Sielańczyk, A

2011-08-01

To compare the efficacy, onset time and duration of maxillary infiltration anaesthesia with 0.5% plain ropivacaine or 4% articaine with epinephrine 1 : 100 000 and to determine their possible influence on cardiovascular parameters. Sixty volunteers received 1.8 mL of the anaesthetic for buccal infiltration anaesthesia of maxillary central and lateral incisors and canine teeth without caries, restorations or signs of pulpitis. The efficacy, onset time and duration of pulp anaesthesia were assessed with an electric pulp tester. The duration of numbness of the upper lip was also monitored. Blood pressure and heart rate were measured before and after administration of the solutions. The efficacy of anaesthesia of lateral and central incisors was 100% for both anaesthetics. There were insignificant differences in effectiveness of canine pulp anaesthesia. The mean onset time was significantly (P < 0.05) shorter for ropivacaine (2.22 min) when compared with articaine (4.08 min). The duration of action and soft tissue anaesthesia were also significantly (P < 0.05) longer for ropivacaine (79.2 and 264 min) when compared with articaine (63.7 and 195.2 min, respectively). Ropivacaine caused significant (P < 0.05) increases in blood pressure and heart rate. Ropivacaine (0.5%) achieved effective and long duration of uninflamed pulp and soft tissue anaesthesia. Ropivacaine could be useful for long-lasting operative procedures without the need for a vasoconstrictor. © 2011 International Endodontic Journal.

Endodontic Management of a Maxillary Lateral Incisor with 4 Root Canals and a Dens Invaginatus Tract.

PubMed

Nosrat, Ali; Schneider, S Craig

2015-07-01

Dens invaginatus (DI) is associated with complex internal anatomy. This article represents a maxillary lateral incisor with 5 root canals including DI. The treatment was planned and performed using cone-beam computed tomographic (CBCT) imaging. After clinical and radiographic evaluations, tooth #7 was diagnosed with DI and pulp necrosis with symptomatic apical periodontitis. Periapical radiographs of the tooth showed 2 roots and complex internal anatomy. CBCT evaluation revealed tooth #7 had 5 separate canals (4 root canals and 1 DI canal extending through the root to the periodontal ligament), communication between DI and the root canal system, and severe and multiple curvatures of the palatal canals. Root canal treatment was completed in 2 visits. Modified access openings were required to safely treat the dilacerated palatal canals. At the 6-month re-evaluation, the patient reported he had remained asymptomatic and his tooth had remained functional since the treatment was completed. Clinical examination showed tooth #7 had no sensitivity to percussion or palpation, probe depths within normal limits (≤3 mm), and no mobility. Radiographic assessment of the tooth showed significant osseous healing of the preoperative lesion. Three-dimensional imaging is a valuable tool for endodontic management of teeth with complex internal anatomy. Three-dimensional imaging is recommended for evaluating and treatment planning cases with DI. Copyright © 2015 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

Maxillary anterior papilla display during smiling: a clinical study of the interdental smile line.

PubMed

Hochman, Mark N; Chu, Stephen J; Tarnow, Dennis P

2012-08-01

The purpose of this research was to quantify the visual display (presence) or lack of display (absence) of interdental papillae during maximum smiling in a patient population aged 10 to 89 years. Four hundred twenty digital single-lens reflex photographs of patients were taken and examined for the visual display of interdental papillae between the maxillary anterior teeth during maximum smiling. Three digital photographs were taken per patient from the frontal, right frontal-lateral, and left frontal-lateral views. The data set of photographs was examined by two examiners for the presence or absence of the visual display of papillae. The visual display of interdental papillae during maximum smiling occurred in 380 of the 420 patients examined in this study, equivalent to a 91% occurrence rate. Eighty-seven percent of all patients categorized as having a low gingival smile line (n = 303) were found to display the interdental papillae upon smiling. Differences were noted for individual age groups according to the decade of life as well as a trend toward decreasing papillary display with increasing age. The importance of interdental papillae display during dynamic smiling should not be left undiagnosed since it is visible in over 91% of older patients and in 87% of patients with a low gingival smile line, representing a common and important esthetic element that needs to be assessed during smile analysis of the patient.

Esthetic preferences of laypersons of different cultures and races with regard to smile attractiveness.

PubMed

Sadrhaghighi, Amir Houman; Zarghami, Afsaneh; Sadrhaghighi, Shahrzad; Mohammadi, Amir; Eskandarinezhad, Mahsa

2017-01-01

Culture and ethnicity are among the factors affecting esthetic judgment of individuals. This study aimed to assess the acceptability threshold of variations in four components of an esthetic smile namely vertical lip thickness, dental midline deviation, buccal corridor, and the golden ratio in maxillary lateral incisors display among laypersons of different races and cultures. Raters (n = 35 in each city) among laypersons of nine cities namely Istanbul, Isfahan, Tabriz, Tehran, Doha, Rome, Sydney, Chicago, and Yazd, were given a photo album containing 27 random images of an attractive female smile, digitally altered with regard to the four smile components. They scored each picture from 0 to 100 in terms of smile attractiveness. Data were analyzed using SPSS 13 and the acceptability threshold for each component was calculated in each city using the Spearman and Wilcoxon tests. P< 0.05 was considered statistically significant. No significant differences were noted with regard to the increased vertical lip thickness, and an acceptability threshold could not be determined for it. The acceptability thresholds for midline deviations, buccal corridor, and the golden ratio were different among different cities. One-millimeter increase in the displayed width of maxillary lateral incisors was more desirable than the golden ratio standard width. Culture and race may significantly affect the esthetic preference of individuals with regard to smile attractiveness.

Class III correction using an inter-arch spring-loaded module

PubMed Central

2014-01-01

Background A retrospective study was conducted to determine the cephalometric changes in a group of Class III patients treated with the inter-arch spring-loaded module (CS2000®, Dynaflex, St. Ann, MO, USA). Methods Thirty Caucasian patients (15 males, 15 females) with an average pre-treatment age of 9.6 years were treated consecutively with this appliance and compared with a control group of subjects from the Bolton-Brush Study who were matched in age, gender, and craniofacial morphology to the treatment group. Lateral cephalograms were taken before treatment and after removal of the CS2000® appliance. The treatment effects of the CS2000® appliance were calculated by subtracting the changes due to growth (control group) from the treatment changes. Results All patients were improved to a Class I dental arch relationship with a positive overjet. Significant sagittal, vertical, and angular changes were found between the pre- and post-treatment radiographs. With an average treatment time of 1.3 years, the maxillary base moved forward by 0.8 mm, while the mandibular base moved backward by 2.8 mm together with improvements in the ANB and Wits measurements. The maxillary incisor moved forward by 1.3 mm and the mandibular incisor moved forward by 1.0 mm. The maxillary molar moved forward by 1.0 mm while the mandibular molar moved backward by 0.6 mm. The average overjet correction was 3.9 mm and 92% of the correction was due to skeletal contribution and 8% was due to dental contribution. The average molar correction was 5.2 mm and 69% of the correction was due to skeletal contribution and 31% was due to dental contribution. Conclusions Mild to moderate Class III malocclusion can be corrected using the inter-arch spring-loaded appliance with minimal patient compliance. The overjet correction was contributed by forward movement of the maxilla, backward and downward movement of the mandible, and proclination of the maxillary incisors. The molar relationship was corrected by mesialization of the maxillary molars, distalization of the mandibular molars together with a rotation of the occlusal plane. PMID:24934153

Bone Engineering of Maxillary Sinus Bone Deficiencies Using Enriched CD90+ Stem Cell Therapy: A Randomized Clinical Trial.

PubMed

Kaigler, Darnell; Avila-Ortiz, Gustavo; Travan, Suncica; Taut, Andrei D; Padial-Molina, Miguel; Rudek, Ivan; Wang, Feng; Lanis, Alejandro; Giannobile, William V

2015-07-01

Bone engineering of localized craniofacial osseous defects or deficiencies by stem cell therapy offers strong prospects to improve treatment predictability for patient care. The aim of this phase 1/2 randomized, controlled clinical trial was to evaluate reconstruction of bone deficiencies of the maxillary sinus with transplantation of autologous cells enriched with CD90+ stem cells and CD14+ monocytes. Thirty human participants requiring bone augmentation of the maxillary sinus were enrolled. Patients presenting with 50% to 80% bone deficiencies of the maxillary sinus were randomized to receive either stem cells delivered onto a β-tricalcium phosphate scaffold or scaffold alone. Four months after treatment, clinical, radiographic, and histologic analyses were performed to evaluate de novo engineered bone. At the time of alveolar bone core harvest, oral implants were installed in the engineered bone and later functionally restored with dental tooth prostheses. Radiographic analyses showed no difference in the total bone volume gained between treatment groups; however, density of the engineered bone was higher in patients receiving stem cells. Bone core biopsies showed that stem cell therapy provided the greatest benefit in the most severe deficiencies, yielding better bone quality than control patients, as evidenced by higher bone volume fraction (BVF; 0.5 versus 0.4; p = 0.04). Assessment of the relation between degree of CD90+ stem cell enrichment and BVF showed that the higher the CD90 composition of transplanted cells, the greater the BVF of regenerated bone (r = 0.56; p = 0.05). Oral implants were placed and restored with functionally loaded dental restorations in all patients and no treatment-related adverse events were reported at the 1-year follow-up. These results provide evidence that cell-based therapy using enriched CD90+ stem cell populations is safe for maxillary sinus floor reconstruction and offers potential to accelerate and enhance tissue engineered bone quality in other craniofacial bone defects and deficiencies (Clinicaltrials.gov NCT00980278). © 2015 American Society for Bone and Mineral Research.

[Stimulation and evaluation on maxillary distraction osteogenesis using CASSOS 2001].

PubMed

Zhu, Min; Qiu, Wei-liu; Tang, You-sheng; Li, Qing-yun

2002-09-01

To simulate maxillary distraction osteogenesis and evaluate the change of soft and hard tissue before and after treatment, using Computer-Assisted Simulation System for Orthognathic Surgery( CASSOS 2001). A fourteen-year-old boy with severe maxillary hypoplasia, due to unilateral cleft lip and palate, was analysed by cephalometric analysis. The simulations of maxillary distraction osteogenesis (Le Fort I osteotomy and Le Fort II osteotomy) were re-analysed. After the treatment, cephalometric analysis was preformed again. The data were compared. The maxillary hypoplasia was well treated using maxillary distraction osteogenesis; Compared with Le fort I osteotomy, more satisfactory results can be obtained by Le fort I distraction osteogenesis. Maxillary distraction osteogenesis is a better way to treat severe maxillary hypoplasia with operated CLP than maxillary osteotomy. CASSOS 2001 can help surgeons and patients on simulation and evaluation of maxillary distraction osteogenesis, and on decision of treatment plan.

Three-dimensional esthetic analysis in treatment planning for implant-supported fixed prosthesis in the edentulous maxilla: review of the esthetics literature.

PubMed

Bidra, Avinash S

2011-08-01

Fixed implant-supported prosthesis for the edentulous maxilla has gained tremendous popularity over the years. Multiple prosthetic designs have been introduced in order to accommodate a gamut of clinical situations. Irrespective of the design, it is paramount that the esthetics imparted by the prosthesis be uncompromised. Though esthetics is subjective, a common ground exists where all its fundamental principles converge. This article reviews pertinent dental and facial esthetics literature for application of various esthetic concepts involved in diagnosis and treatment planning for an implant-supported fixed prosthesis in the edentulous maxilla. Three-dimensional esthetic analysis involves assessment of various esthetic parameters in superior-inferior, medial-lateral, and anterior-posterior dimensions. The impact of various esthetic parameters such as facial forms, facial profiles, maxillary teeth positions, maxillary teeth proportions, smile lines, lip support, gingival display, facial midline, dental midline, horizontal cant, and smile width are discussed in detail. © 2011 Wiley Periodicals, Inc.

Aesthetic Rehabilitation of a Complicated Crown-Root Fracture of the Maxillary Incisor: Combination of Orthodontic and Implant Treatment

PubMed Central

de Avila, Érica Dorigatti; de Molon, Rafael Scaf; Cardoso, Mauricio de Almeida; Capelozza Filho, Leopoldino; Campos Velo, Marilia Mattar de Amoêdo; Mollo, Francisco de Assis; Borelli Barros, Luiz Antonio

2014-01-01

The aim of this paper is to present a complex rehabilitation, of fractured tooth, with implants in anterior region considering the orthodontics extrusion to clinical success. At 7 years old, the patient fractured the maxillary left central incisor and the dentist did a crown with the fragment. Twenty years later, the patient was referred to a dental clinic for orthodontic treatment, with the chief complaint related to an accentuated deep bite, and a professional started an orthodontic treatment. After sixteen months of orthodontic treatment, tooth 21 fractured. The treatment plan included an orthodontic extrusion of tooth 21 and implant placement. This case has been followed up and the clinical and radiographic examinations show excellence esthetic results and satisfaction of patient. The forced extrusion can be a viable treatment option in the management of crown root fracture of an anterior tooth to gain bone in a vertical direction. This case emphasizes that to achieve the esthetic result a multidisciplinary approach is necessary. PMID:24872900

Cleft maxillary distraction versus orthognathic surgery--which one is more stable in 5 years?

PubMed

Chua, Hannah Daile P; Hägg, Margareta Bendeus; Cheung, Lim Kwong

2010-06-01

The objective of this study was to compare the long-term stability of distraction osteogenesis (DO) and conventional orthognathic surgery (CO) in patients with cleft lip and palate (CLP). CLP patients requiring maxillary advancement of 4 to 10 mm were randomized and assigned to either CO or DO. In the CO group, the maxilla was fully mobilized to the preplanned position and fixed using titanium miniplates. In the DO group, the maxilla was mobilized to a limited extent and distractors were fixed on each side of the maxilla. Serial lateral cephalographs were taken for the assessment of stability at different postoperative periods up to 5 years. In the CO group, the maxilla relapsed backward and upward, whereas in the DO group, it advanced more forward and downward over 5 years. Distraction of the cleft maxilla can achieve better long-term skeletal stability in maintaining its advanced position than CO. Copyright 2010 Mosby, Inc. All rights reserved.

Globe penetration in a cat following maxillary nerve block for dental surgery.

PubMed

Perry, Rachel; Moore, Denise; Scurrell, Emma

2015-01-01

Dental treatment was carried out in an 8.5-year-old castrated male domestic shorthair cat found to have tooth resorption. Right mandibular, and right and left maxillary nerve blocks were administered using a 1 ml syringe attached to a 25 G x 5/8 inch needle and an intraoral technique. The following day the cat displayed blepharospasm of the right eye. The ocular signs progressed and 5 days later an ophthalmologist confirmed a blind, glaucomatous right eye. It was suspected that the eye had suffered a penetrating injury during dental surgery. Enucleation of the right eye was performed and gross and histopathological examination revealed a penetrating wound consistent with a needle tract injury. Complications arising from veterinary dental regional anaesthesia appear to be rare; however, it may be that they are under-reported. This case report highlights the risks involved and reviews the safest and most efficacious regional anaesthesia technique for the feline maxilla. © ISFM and AAFP 2015.

Incisors’ proportions in smile esthetics

PubMed Central

Alsulaimani, Fahad F; Batwa, Waeil

2013-01-01

Aims: To determine whether alteration of the maxillary central and lateral incisors’ length and width, respectively, would affect perceived smile esthetics and to validate the most esthetic length and width, respectively, for the central and lateral incisors. Materials and Methods: Photographic manipulation was undertaken to produce two sets of photographs, each set of four photographs showing the altered width of the lateral incisor and length of the central length. The eight produced photographs were assessed by laypeople, dentists and orthodontists. Results: Alteration in the incisors’ proportion affected the relative smile attractiveness for laypeople (n=124), dentists (n=115) and orthodontists (n=68); dentists and orthodontists did not accept lateral width reduction of more than 0.5 mm (P<0.01), which suggests that the lateral to central incisor width ratio ranges from 54% to 62%. However, laypeople did not accept lateral width reduction of more than 1 mm (P<0.01), widening the range to be from 48% to 62%. All groups had zero tolerance for changes in central crown length (P<0.01). Conclusion: All participants recognized that the central incisors’ length changes. For lateral incisors, laypeople were more tolerant than dentists and orthodontists. This suggests that changing incisors’ proportions affects the relative smile attractiveness. PMID:24987650

Endoscopic and computed tomographic evaluation of influence of nasal septal deviation on lateral wall of nose and its relation to sinus diseases.

PubMed

Poorey, V K; Gupta, Neha

2014-09-01

To correlate symptoms of deviated nasal septum (DNS) and chronic rhinosinusitis with the findings of nasal endoscopy and computed tomographic (CT) imaging. To evaluate the influence of degree of septal angle deviation on the severity of lateral nasal wall abnormalities. A prospective study was conducted on 67 patients with clinical evidence of DNS and chronic sinusitis attending ENT OPD between January 2012 and September 2013. All these patients underwent nasal endoscopy and CT scan PNS coronal sections. Direction and degree of DNS was recorded. Range of sinus mucosal thickening on CT scan films was also recorded. Chronic sinusitis is common in the age group between 21 and 40 years (50.74 %) with male preponderance (55.22 %), chief symptoms being nasal obstruction (86.56 %), headache (73.13 %) and nasal discharge (52.23 %). Left sided DNS is more common (64.17 %). Most of the patients have moderate DNS, i.e. 6°-10° (56.7 %), followed by severe (22.4 %) and then mild (20.9 %). DNS results in compensatory structural changes in the turbinates and/or lateral nasal wall which causes ostiomeatal complex (OMC) obstruction resulting in sinusitis. Contralateral concha bullosa and ethmoid bulla prominence was noted. Maxillary sinus is most commonly affected sinus (73.13 %). Patients with increasing septal angles were associated with a higher incidence of maxillary sinus mucosal changes (p < 0.05). Present study reemphasized the concept that septal deviation causes obstruction at OMC which results in an increased incidence and severity of bilateral chronic sinus disease.

Craniofacial and upper airway morphology in pediatric sleep-disordered breathing and changes in quality of life with rapid maxillary expansion.

PubMed

Katyal, Vandana; Pamula, Yvonne; Daynes, Cathal N; Martin, James; Dreyer, Craig W; Kennedy, Declan; Sampson, Wayne J

2013-12-01

The association between pediatric sleep-disordered breathing caused by upper airway obstruction and craniofacial morphology is poorly understood and contradictory. The aims of this study were to evaluate the prevalence of children at risk for sleep-disordered breathing, as identified in an orthodontic setting by validated screening questionnaires, and to examine associations with their craniofacial and upper airway morphologies. A further aim was to assess the change in quality of life related to sleep-disordered breathing for affected children undergoing rapid maxillary expansion to correct a palatal crossbite or widen a narrow maxilla. A prospective case-control study with children between 8 and 17 years of age (n = 81) at an orthodontic clinic was undertaken. The subjects were grouped as high risk or low risk for sleep-disordered breathing based on the scores from a validated 22-item Pediatric Sleep Questionnaire and the Obstructive Sleep Apnea-18 Quality of Life Questionnaire. Variables pertaining to a screening clinical examination, cephalometric assessment, and dental cast analysis were tested for differences between the 2 groups at baseline. Ten children who underwent rapid maxillary expansion were followed longitudinally until removal of the appliance approximately 9 months later with a repeated Obstructive Sleep Apnea-18 Quality of Life Questionnaire. All data were collected blinded to the questionnaire results. The frequency of palatal crossbite involving at least 3 teeth was significantly higher in the high-risk group at 68.2%, compared with the low-risk group at 23.2% (P <0.0001). Average quality of life scores in the high-risk group indicated reduced quality of life related to sleep-disordered breathing by 16% compared with children in the low-risk group at baseline (P <0.0001). Cephalometrically, mean inferior airway space, posterior nasal spine to adenoidal mass distance, and adenoidal mass to soft palate distance were reduced in the high-risk group compared with the low-risk group by 1.87 mm (P <0.03), 2.82 mm (P <0.04), and 2.13 mm (P <0.03), respectively. The mean maxillary intercanine, maxillary interfirst premolar, maxillary interfirst molar, mandibular intercanine, and mandibular interfirst premolar widths were reduced in the high-risk group compared with the low-risk group by 4.22 mm (P <0.0001), 3.92 mm (P <0.0001), 4.24 mm (P <0.0001), 1.50 mm (P <0.01), and 1.84 mm (P <0.01), respectively. Children treated with rapid maxillary expansion showed an average improvement of 14% in quality of life scores in the high-risk group compared with the low-risk group, which showed a slight worsening in quality of life related to sleep-disordered breathing by an average of 1% (P <0.04), normalizing the quality of life scores in the high-risk children to the baseline scores compared with the low-risk group. Children at high risk for sleep-disordered breathing are characterized by reduced quality of life, reduced nasopharyngeal and oropharyngeal sagittal dimensions, palatal crossbite, and reduced dentoalveolar transverse widths in the maxillary and mandibular arches. No sagittal or vertical craniofacial skeletal cephalometric predictors were identified for children at high risk for sleep-disordered breathing. In the short term, rapid maxillary expansion might aid in improvement of the quality of life for children with a narrow maxilla in the milder end of the sleep-disordered breathing spectrum. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

The incidence and morphology of maxillary sinus septa in dentate and edentulous maxillae: a cadaveric study with a brief review of the literature

PubMed Central

Wabale, Rajendra Namdeo; Siddiqui, Abu Ubaida; Farooqui, Mujjebuddeen Samsudeen

2015-01-01

Objectives The aim of this study is to determine the incidence, location, and orientation of maxillary sinus septa in formalin embalmed cadavers. Materials and Methods The study was conducted on 210 cadaveric heads available in our department. After taking the mid-sagittal section the specimens were opened from the medial aspect and the sinus cavity was explored for the presence of maxillary sinus septa, their anatomical plane, location and dimensions. Results The mean linear distance between maxillary sinus floor and its anatomical ostium was 26.76±5.21 mm and 26.91±4.96 mm on right and left side, respectively. A total of 59 maxillary sinus septa (28.1%) were observed in 210 maxillary specimens. Septae were most common, 33 septa (55.9%), in the middle region (between first and second molar tooth) of the sinus cavity. The maxillary sinus membrane (Schneiderian membrane) adhered tightly to the maxillary sinus and over the septae. Significantly more maxillary sinus septa were observed in edentulous maxillae in comparison to the dentate upper jaw. Conclusion Knowledge of location of maxillary sinus ostium is mandatory for the rhinologist for drainage of secretions in maxillary sinusitis. The morphological details of maxillary sinus septa, particularly their location and anatomical planes, will guide dentists in performance of safe implant surgeries. The maxillary antrum septa of category I and II may complicate the procedure of inversion of bone plate and elevation of sinus membrane during maxillary augmentation surgeries. The category III septa observed in the sagittal plane were embedded by one of the branches of the infraorbital nerve in it, and if accidentally cut will lead to infraorbital nerve palsy in maxillary sinus surgeries. PMID:25741466

Metabolic pathway reconstruction of eugenol to vanillin bioconversion in Aspergillus niger

PubMed Central

Srivastava, Suchita; Luqman, Suaib; Khan, Feroz; Chanotiya, Chandan S; Darokar, Mahendra P

2010-01-01

Identification of missing genes or proteins participating in the metabolic pathways as enzymes are of great interest. One such class of pathway is involved in the eugenol to vanillin bioconversion. Our goal is to develop an integral approach for identifying the topology of a reference or known pathway in other organism. We successfully identify the missing enzymes and then reconstruct the vanillin biosynthetic pathway in Aspergillus niger. The procedure combines enzyme sequence similarity searched through BLAST homology search and orthologs detection through COG & KEGG databases. Conservation of protein domains and motifs was searched through CDD, PFAM & PROSITE databases. Predictions regarding how proteins act in pathway were validated experimentally and also compared with reported data. The bioconversion of vanillin was screened on UV-TLC plates and later confirmed through GC and GC-MS techniques. We applied a procedure for identifying missing enzymes on the basis of conserved functional motifs and later reconstruct the metabolic pathway in target organism. Using the vanillin biosynthetic pathway of Pseudomonas fluorescens as a case study, we indicate how this approach can be used to reconstruct the reference pathway in A. niger and later results were experimentally validated through chromatography and spectroscopy techniques. PMID:20978605

Dentofacial effects of skeletal anchored treatment modalities for the correction of maxillary retrognathia.

PubMed

Sar, Cağla; Sahinoğlu, Zahire; Özçirpici, Ayça Arman; Uçkan, Sina

2014-01-01

The aim of this clinical study was to investigate the skeletal, dentoalveolar, and soft-tissue effects of 2 skeletal anchorage rationales for Class III treatment compared with an untreated Class III control group. Fifty-one subjects who were in the prepubertal or pubertal growth period were included in the study. In group 1 (n = 17), facemasks were applied from miniplates placed in the lateral nasal walls of the maxilla, and intermaxillary Class III elastics were applied from symphyseal miniplates to a bonded appliance on the maxilla in group 2 (n = 17). These skeletal anchored groups were compared with an untreated control group (n = 17). Lateral cephalometric radiographs were obtained at the beginning and the end of the observation periods in all groups and analyzed according to the structural superimposition method. Differences between the groups were assessed with the Wilcoxon signed rank test or the paired-samples t test. The treatment periods were 7.4 and 7.6 months in groups 1 and 2, respectively, and the untreated control group was observed for 7.5 months. The maxilla moved forward by 3.11 mm in group 1 and by 3.82 mm in group 2. The counterclockwise rotation of the maxilla was significantly less in group 1 compared with group 2 (P <0.01). The mandible showed clockwise rotation and was positioned downward and backward in the treatment groups, and it was significantly greater in group 2 compared with group 1 (P <0.01). Changes in the maxillary incisor measurements were negligible in group 1 compared with group 2. A significant amount of mandibular incisor retroclination was seen in group 1, and a significant proclination was seen in group 2. The maxillomandibular relationships and the soft-tissue profiles were improved remarkably in both treatment groups. The protocols of miniplates with facemasks and miniplates with Class III elastics offer valid alternatives to conventional methods in severe skeletal Class III patients. However, the 2 maxillary protraction protocols demonstrated significant skeletal and dentoalveolar effects. The miniplate with facemask protocol is preferred for patients with severe maxillary retrusion and a high-angle vertical pattern, whereas in patients with a decreased or normal vertical pattern and retroclined mandibular incisors, miniplates with Class III elastics can be the intraoral treatment option. Therefore, the exact indication of the procedure should be considered carefully. Copyright © 2014 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Evolution of the paranasal sinuses' anatomy through the ages

PubMed Central

Mavrodi, Alexandra

2013-01-01

Previously, anatomists considered paranasal sinuses as a mysterious region of the human skull. Historically, paranasal sinuses were first identified by ancient Egyptians and later, by Greek physicians. After a long period of no remarkable improvement in the understanding of anatomy during the Middle Ages, anatomists of the Renaissance period-Leonardo da Vinci and Vesalius-made their own contribution. Nathaniel Highmore's name is also associated with the anatomy of paranasal sinuses as he was first to describe the maxillary sinus. PMID:24386595

Maxillary advancement using distraction osteogenesis with intraoral device.

PubMed

Takigawa, Yoko; Uematsu, Setsuko; Takada, Kenji

2010-11-01

This article describes the surgical orthodontic treatment of maxillary hypoplasia in a patient with cleft lip and palate using maxillary distraction osteogenesis with internal maxillary distractors. Maxillary advancement was performed to correct the retrusive maxillary facial profile and Class III malocclusion. Rotational movement of the distraction segment was made to correct the upper dental midline. Although maxillary advancement was insufficient because of unexpected breakage of the intraoral distractor after completion of the distraction, skeletal traction with a face mask compensated for the shortage. Successful esthetic improvement and posttreatment occlusal stability were achieved with no discernible relapse after 2 years of retention.

A retrospective study comparing the loss of anchorage following the extraction of maxillary first or second premolars during orthodontic treatment with fixed appliances in adolescent patients.

PubMed

Haque, Samantha; Sandler, Jonathan; Cobourne, Martyn T; Bassett, Paul; DiBiase, Andrew T

2017-12-01

This retrospective study assessed the difference in anchorage loss using 3D superimposition of study models between cases treated with extraction of maxillary first premolars and maxillary second premolars carried out in orthodontic specialist practice. Sixty subjects who have undergone extractions of either maxillary first or second premolars as part of their orthodontic treatment were selected. Eligibility criteria included patients with a Class I, mild Class II or III malocclusions, mild-to-moderate crowding with no anchorage reinforcement. Pre- and post-treatment maxillary dental study cases were scanned using a surface laser scanner to produced 3D digital images which were superimposed using areas of stability on the anterior hard palate. Anchorage loss was measured by the mesial movement of the maxillary first permanent molar. The mean mesial movement for the maxillary first molars, when adjusted for confounding factors was 4.7 mm (SD 1.6) in the maxillary first premolar extraction group and 4.6 mm (SD 1.6) in the maxillary second premolar extraction group. There is no difference in anchorage loss when comparing the extraction of the maxillary first premolars to the extraction maxillary second premolars.

A computed tomography study in the location of greater palatine artery in South Indian population for maxillary osteotomy

PubMed Central

Packiaraj, I.; Retnakumar, K.; Anusuya, G. Sai; Rajambigai, M. Aarti; Baskaran, M.; Devadoss, Vimal Joseph

2016-01-01

Introduction: The greater palatine artery is one of the important feeding vessel to the maxilla. The surgeon should know the surgical anatomy of greater palatine artery to avoid trauma in maxilla which leads to ischemic problems. Aim: The CT evaluation of the distance between Pyriform aperture and the greater palatine foramen in various ages of both sexes. Result: The distance varies according to sex and age which are measured by CT and standardised. Discussion: The lateral nasal osteotomy can be done upto 25 mm depth, instead of 20 mm. Conclusion: By this study it shows that the lateral nasal wall osteotomy can be performed without injury to greater palatine artery. PMID:27829768

Alveolar nerve repositioning with rescue implants for management of previous treatment. A clinical report.

PubMed

Amet, Edward M; Uehlein, Chris

2013-12-01

The goal of modern implant dentistry is to return patients to oral health in a rapid and predictable fashion, following a diagnostically driven treatment plan. If only a limited number of implants can be placed, or some fail and the prosthetic phase of implant dentistry is chosen to complete the patient's treatment, the final outcome may result in partial patient satisfaction and is commonly referred to as a "compromise." Previous All-on-4 implant treatment for the patient presented here resulted in a compromise, with an inadequate support system for the mandibular prosthesis and a maxillary complete denture with poor esthetics. The patient was unable to function adequately and also was disappointed with the resulting appearance. Correction of the compromised treatment consisted of bilateral inferior alveolar nerve elevation and repositioning without bone removal for lateral transposition, to gain room for rescue implants for a totally implant-supported and stabilized prosthesis. Treatment time to return the patient to satisfactory comfort, function, facial esthetics, and speech was approximately 2 weeks. The definitive mandibular prosthesis was designed for total implant support and stability with patient retrievability. Adequate space between the mandibular bar system and the soft tissue created a high water bridge effect for self-cleansing. Following a short interim mandibular healing period, the maxillary sinuses were bilaterally grafted to compensate for bone inadequacies and deficiencies for future maxillary implant reconstruction. © 2013 by the American College of Prosthodontists.

The incidence of maxillary sinus membrane perforation during endoscopically assessed crestal sinus floor elevation: a pilot study.

PubMed

Garbacea, Antoanela; Lozada, Jaime L; Church, Christopher A; Al-Ardah, Aladdin J; Seiberling, Kristin A; Naylor, W Patrick; Chen, Jung-Wei

2012-08-01

Transcrestal sinus membrane elevation is a surgical procedure performed to increase the bone volume in the maxillary sinus cavity. Because of visual limitations, the potential for maxillary sinus membrane perforations may be greater than with the lateral approach technique. The aim of this study was to macroscopically investigate ex vivo the occurrence of sinus membrane perforation during surgery using 3 transcrestal sinus floor elevation methods. Twenty fresh human cadaver heads, with 40 intact sinuses, were used for simultaneous sinus membrane elevation, placement of graft material, and dental implants. Real-time sinus endoscopy, periapical digital radiographs, and cone-beam computerized tomography (CBCT) images were subsequently used to evaluate the outcome of each surgical procedure. Perforation rates for each of the 3 techniques were then compared using a significance level of P < .05. No statistically significant differences in the perforation rate (P = .79) were found among the 3 surgical techniques. Although the sinus endoscope noted a higher frequency of perforations at the time of implant placement as compared with instrumentation or graft insertion, the difference was not statistically significant (P = .04). The CBCT readings were judged to be more accurate for identifying evidence of sinus perforations than the periapical radiographs when compared with the direct visualization with the endoscope. This pilot study demonstrated that a sinus membrane perforation can occur at any time during the sinus lift procedure, independent of the surgical method used.

Assessment of pterygomaxillary separation in Le Fort I Osteotomy in class III patients.

PubMed

Ueki, Koichiro; Hashiba, Yukari; Marukawa, Kohei; Okabe, Katsuhiko; Alam, Shamiul; Nakagawa, Kiyomasa; Yamamoto, Etsuhide

2009-04-01

To examine the separation of the pterygomaxillary region at the posterior nasal spine level after Le Fort I osteotomy in Class III patients. The study group consisted of 37 Japanese patients with mandibular prognathism and asymmetry, with maxillary retrognathism or asymmetry. A total of 74 sides were examined. Le Fort I osteotomy was performed without a pterygoid osteotome, with an ultrasonic curette used to remove interference at the pterygomaxillary region. Postoperative computed tomography (CT) was analyzed for all patients. The separation of the pterygomaxillary region and the location of the descending palatine artery were assessed. Although acceptable separation between the maxilla and pterygoid plates was achieved in all patients, an exact separation of the pterygomaxillary junction at the posterior nasal spine level was found in only 18 of 74 sides (24%). In 29 of 74 sides (39.2%), the separation occurred anterior to the descending palatine artery. In 29 of 74 sides (39.2%), complete separation between the maxilla and lateral and/or medial pterygoid plate was not achieved, but lower level separation of the maxilla and pterygoid plate was always complete. The maxillary segments could be moved to the postoperative ideal position in all cases. Le Fort I osteotomy without an osteotome does not always induce an exact separation at the pterygomaxillary junction at the posterior nasal spine level, but the ultrasonic bone curette can remove the interference between maxillary segment and pterygoid plates more safely.

Beak deviations in the skull of Franciscana dolphins Pontoporia blainvillei from Argentina.

PubMed

Denuncio, Pablo; Panebianco, M Victoria; Del Castillo, Daniela; Rodríguez, Diego; Cappozzo, H Luis; Bastida, Ricardo

2016-06-15

The Franciscana dolphin Pontoporia blainvillei is characterized by a long rostrum, a feature that is shared with the families formerly classified as river dolphins (Pontoporiidae, Platanistidae, Iniidae, Lipotidae). Although there are occasional reports on the existence of beak deformations, very little published information exists describing this process. The object of the present study was to describe and quantify the beak anomalies of Franciscana dolphins from the coastal waters of Argentina. Of 239 skulls analyzed 12% showed beak deviations (BD), affecting the premaxillary-maxillary and dentary bones to different extents. The occurrence of BD in the dentary bone represented 58%, whereas premaxillary-maxillary BDs were observed in 14% of the studied specimens, while the complete rostrum (dentary, premaxillary and maxillary) was affected in 28% of the skulls. Dorsoventral axis BD was more frequent than lateral BD (48 and 38%, respectively), and double BD was only observed in the dentary bone. Most of the BD observed in this study could be classified as mild/moderate, and we assume that it did not affect the feeding activities of individuals; however, 2 specimens (<1%) showed a severe and complex curvature that probably did affect them. The cause of these anomalies (natural or anthropogenic origins) is unknown but may be related to important parasite loads, heavy metal and organic contaminants and plastic ingestion that could affect the coastal dolphin in different ways. A more detailed and thorough study of these cranial anomalies is necessary.

Predisposing factors to severe external root resorption associated to orthodontic treatment.

PubMed

Picanço, Gracemia Vasconcelos; de Freitas, Karina Maria Salvatore; Cançado, Rodrigo Hermont; Valarelli, Fabricio Pinelli; Picanço, Paulo Roberto Barroso; Feijão, Camila Pontes

2013-01-01

The aim of this study was to evaluate predisposing factors among patients who developed moderate or severe external root resorption (Malmgren's grades 3 and 4), on the maxillary incisors, during fixed orthodontic treatment in the permanent dentition. Ninety-nine patients who underwent orthodontic treatment with fixed edgewise appliances were selected. Patients were divided into two groups: G1 - 50 patients with no root resorption or presenting only apical irregularities (Malmgren's grades 0 and 1) at the end of the treatment, with mean initial age of 16.79 years and mean treatment time of 3.21 years; G2 - 49 patients presenting moderate or severe root resorption (Malmgren's grades 3 and 4) at the end of treatment on the maxillary incisors, with mean initial age of 19.92 years and mean treatment time of 3.98 years. Periapical radiographs and lateral cephalograms were evaluated. Factors that could influence the occurrence of severe root resorption were also recorded. Statistical analysis included chi-square tests, Fisher's exact test and independent t tests. The results demonstrated significant difference between the groups for the variables: Extractions, initial degree of root resorption, root length and crown/root ratio at the beginning, and cortical thickness of the alveolar bone. It can be concluded that: Presence of root resorption before the beginning of treatment, extractions, reduced root length, decreased crown/root ratio and thin alveolar bone represent risk factors for severe root resorption in maxillary incisors during orthodontic treatment.

Cephalometric analysis of the middle part of the face in patients with mandibular prognathism.

PubMed

Cutović Tatjana; Jović, Nebojsa; Kozomara, Ruzica; Radojicić, Julija; Janosević, Mirjana; Mladenović, Irena; Matijević, Stevo

2014-11-01

The middle part of the face, that is the maxilla, has always been mentioned as a possible etiologic factor of skeletal Class III. However, the importance of the relationship of maxillary retroposition towards the cranial base is still unclear, although it has been examined many times. The aim of this study was to conduct cephalometric analysis of the morphology of maxilla, including the whole middle part of the face in patients with divergent and convergent facial types of mandibular prognathism, as well as to determine differences betweeen them. Lateral cephalometric teleradiograph images of 90 patients were analyzed at the Dental Clinic of the Military Medical Academy, Belgrade, Serbia. All the patients were male, aged 18-35 years, not previously treated orthodontically. On the basis of dentalskeletal relations of jaws and teeth, the patients were divided into three groups: the group P1 (patients with divergent facial type of mandibular prognathism), P2 (patients with convergent facial type of mandibular pragmathism) and the group E (control group or eugnathic patients). A total of 9 cephalometric parameters related to the middle face were measured and analyzed: the length of the hard palate--SnaSnp, the length of the maxillary corpus--AptmPP, the length of the soft palate, the angle between the hard and soft palate--SnaSnpUt, the angle of inclination of the maxillary alveolar process, the angle of inclination of the upper front teeth, the effective maxillary length--CoA, the posterior maxillary alveolar hyperplasia--U6PP and the angle of maxillary prognathism. The obtained results showed that the CoA, AptmPP and SnaSnp were significally shorter in patients with divergent facial type of mandibular prognathism compared to patients with convergent facial type of the mandibular prognathism and also in both experimental groups of patients compared to the control group. SnaSnp was significantly shorter in patients with divergent facial type of mandibular prognathism compared to the control group, whereas SnaSnp was significantly smaller in patients with convergent facial type of mandibular prognathism compared to the control group. Additionally, there was a pronounced incisor dentoalveolar compensation of skeletal discrepancy in both groups of patients with mandibular prognathism manifested in the form of a significant upper front teeth protrusion, but without significant differences among the groups, while the maxillary retrognathism was present in most patients of both experimental groups. A pronounced UGPP was found only in the patients with divergent type of mandibular prognathism. The maxilla is certainly one of the key factors which contributes to making the diagnosis, but primarily to making a plan for mandibular prognathism treatment Accurate assessment of the manifestation of abnormality, localization of skeletal problems and understanding of the biological potential are key factors of the stability of/the results of surgical-orthodontic treatment of this abnormality.

Facial and occlusal esthetic improvements of an adult skeletal Class III malocclusion using surgical, orthodontic, and implant treatment

PubMed Central

de Almeida Cardoso, Mauricio; de Avila, Erica Dorigatti; Guedes, Fabio Pinto; Battilani Filho, Valter Antonio Ban; Capelozza Filho, Leopoldino; Correa, Marcio Aurelio; Nary Filho, Hugo

2016-01-01

The aim of this clinical report is to describe the complex treatment of an adult Class III malocclusion patient who was disappointed with the outcome of a previous oral rehabilitation. Interdisciplinary treatment planning was performed with a primary indication for implant removal because of marginal bone loss and gingival recession, followed by orthodontic and surgical procedures to correct the esthetics and skeletal malocclusion. The comprehensive treatment approach included: (1) implant removal in the area of the central incisors; (2) combined orthodontic decompensation with mesial displacement and forced extrusion of the lateral incisors; (3) extraction of the lateral incisors and placement of new implants corresponding to the central incisors, which received provisional crowns; (4) orthognathic surgery for maxillary advancement to improve occlusal and facial relationships; and finally, (5) orthodontic refinement followed by definitive prosthetic rehabilitation of the maxillary central incisors and reshaping of the adjacent teeth. At the three-year follow-up, clinical and radiographic examinations showed successful replacement of the central incisors and improved skeletal and esthetic appearances. Moreover, a Class II molar relationship was obtained with an ideal overbite, overjet, and intercuspation. In conclusion, we report the successful esthetic anterior rehabilitation of a complex case in which interdisciplinary treatment planning improved facial harmony, provided gingival architecture with sufficient width and thickness, and improved smile esthetics, resulting in enhanced patient comfort and satisfaction. This clinical case report might be useful to improve facial esthetics and occlusion in patients with dentoalveolar and skeletal defects. PMID:26877982

Central projections of gustatory receptor neurons in the medial and the lateral sensilla styloconica of Helicoverpa armigera larvae.

PubMed

Tang, Qing-Bo; Zhan, Huan; Cao, Huan; Berg, Bente G; Yan, Feng-Ming; Zhao, Xin-Cheng

2014-01-01

Food selection behavior of lepidopteran larvae is predominantly governed by the activation of taste neurons present in two sensilla styloconica located on the galea of the maxilla. In this study, we present the ultrastructure of the sensilla styloconica and the central projection pattern of their associated receptor neurons in larvae of the heliothine moth, Helicoverpa armigera. By means of light microscopy and scanning electron microscopy, the previous findings of two morphologically fairly similar sensilla comprising a socketed conic tip inserted into a large peg were confirmed. However, the peg size of the medial sensillum was found to be significantly bigger than that of the lateral sensillum. The sensory neurons derived from each sensillum styloconicum were mapped separately using anterograde staining experiments combined with confocal laser-scanning microscopy. For determining the afferents' target regions relative to each other, we reconstructed the labeled axons and placed them into a common reference framework. The sensory axons from both sensilla projected via the ipsilateral maxillary nerve to the suboesophageal ganglion and further through the ipsilateral circumoesophageal connective to the brain. In the suboesophageal ganglion, the sensory projections targeted two areas of the ipsilateral maxillary neuropil, one located in the ventrolateral neuromere and the other adjacent to the neuromere midline. In the brain, the axon terminals targeted the dorso-anterior area of the ipsilateral tritocerebrum. As confirmed by the three-dimensional reconstructions, the target regions of the neural projections originating from each of the two sensilla styloconica were identical.

Simulator Evaluation of Airborne Information for Lateral Spacing (AILS) Concept

NASA Technical Reports Server (NTRS)

Abbott, Terence S.; Elliott, Dawn M.

2001-01-01

The Airborne Information for Lateral Spacing (AILS) concept is designed to support independent parallel approach operations to runways spaced as close as 2500 ft. This report describes the AILS operational concept and the results of a ground-based flight simulation experiment of one implementation of this concept. The focus of this simulation experiment was to evaluate pilot performance, pilot acceptability, and minimum miss-distances for the rare situation in which all aircraft oil one approach intrudes into the path of an aircraft oil the other approach. Results from this study showed that the design-goal mean miss-distance of 1200 ft to potential collision situations was surpassed with an actual mean miss-distance of 2236 ft. Pilot reaction times to the alerting system, which was an operational concern, averaged 1.11 sec, well below the design-goal reaction time 2.0 sec.These quantitative results and pilot subjective data showed that the AILS concept is reasonable from an operational standpoint.

Retrospective study of root canal configurations of maxillary third molars in Central India population using cone beam computed tomography Part- I.

PubMed

Rawtiya, Manjusha; Somasundaram, Pavithra; Wadhwani, Shefali; Munuga, Swapna; Agarwal, Manish; Sethi, Priyank

2016-01-01

The aim of this study was to investigate the root and canal morphology of maxillary third molars in Central India population using cone-beam computed tomography (CBCT) analysis. CBCT images of 116 maxillary third molars were observed, and data regarding the number of roots, the number of canals, and Vertucci's Classification in each root was statistically evaluated. Majority of Maxillary third molars had three roots (55.2%) and three canals (37.9%). Most MB root (43.8%), DB root (87.5%), and palatal root (100%) of maxillary third molars had Vertucci Type I. Mesiobuccal root of three-rooted maxillary third molars had Vertucci Type I (43.8%) and Type IV (40.6%) configuration. Overall prevalence of C-shaped canals in maxillary third molars was 3.4%. There was a high prevalence of three-rooted maxillary molars with three canals.

Vesicular glutamate transporters in the lateral geniculate nucleus: expression of VGLUT2 by retinal terminals.

PubMed

Land, Peter W; Kyonka, E; Shamalla-Hannah, L

2004-01-23

We used immunohistochemistry to localize vesicular glutamate transporters VGLUT1 and VGLUT2 in the rat lateral geniculate nucleus. The lateral geniculate nucleus is intensely immunoreactive for both transporters. Monocular eye removal abolished staining for VGLUT2 in a pattern corresponding to the distribution of terminals from the missing eye, without affecting distribution of VGLUT1 immunoreactivity. These data indicate retinal ganglion cells are the source of VGLUT2-containing synapses in the lateral geniculate nucleus.

The morphological interaction between the nasal cavity and maxillary sinuses in living humans.

PubMed

Holton, Nathan; Yokley, Todd; Butaric, Lauren

2013-03-01

To understand how variation in nasal architecture accommodates the need for effective conditioning of respired air, it is necessary to assess the morphological interaction between the nasal cavity and other aspects of the nasofacial skeleton. Previous studies indicate that the maxillary sinuses may play a key role in accommodating climatically induced nasal variation such that a decrease in nasal cavity volume is associated with a concomitant increase in maxillary sinus volume. However, due to conflicting results in previous studies, the precise interaction of the nasal cavity and maxillary sinuses, in humans, is unclear. This is likely due to the prior emphasis on nasal cavity size, whereas arguably, nasal cavity shape is more important with regard to the interaction with the maxillary sinuses. Using computed tomography scans of living human subjects (N=40), the goal of this study is to assess the interaction between nasal cavity form and maxillary sinus volume in European- and African-derived individuals with differences in nasal cavity morphology. First, we assessed whether there is an inverse relationship between nasal cavity and maxillary sinus volumes. Next, we examined the relationship between maxillary sinus volume and nasal cavity shape using multivariate regression. Our results show that there is a positive relationship between nasal cavity and maxillary sinus volume, indicating that the maxillary sinuses do not accommodate variation in nasal cavity size. However, maxillary sinus volume is significantly correlated with variation in relative internal nasal breadth. Thus, the maxillary sinuses appear to be important for accommodating nasal cavity shape rather than size. Copyright © 2013 Wiley Periodicals, Inc.

Classification of maxillectomy defects: a systematic review and criteria necessary for a universal description.

PubMed

Bidra, Avinash S; Jacob, Rhonda F; Taylor, Thomas D

2012-04-01

Maxillectomy defects are complex and involve a number of anatomic structures. Several maxillectomy defect classifications have been proposed with no universal acceptance among surgeons and prosthodontists. Established criteria for describing the maxillectomy defect are lacking. This systematic review aimed to evaluate classification systems in the available literature, to provide a critical appraisal, and to identify the criteria necessary for a universal description of maxillectomy and midfacial defects. An electronic search of the English language literature between the periods of 1974 and June 2011 was performed by using PubMed, Scopus, and Cochrane databases with predetermined inclusion criteria. Key terms included in the search were maxillectomy classification, maxillary resection classification, maxillary removal classification, maxillary reconstruction classification, midfacial defect classification, and midfacial reconstruction classification. This was supplemented by a manual search of selected journals. After application of predetermined exclusion criteria, the final list of articles was reviewed in-depth to provide a critical appraisal and identify criteria for a universal description of a maxillectomy defect. The electronic database search yielded 261 titles. Systematic application of inclusion and exclusion criteria resulted in identification of 14 maxillectomy and midfacial defect classification systems. From these articles, 6 different criteria were identified as necessary for a universal description of a maxillectomy defect. Multiple deficiencies were noted in each classification system. Though most articles described the superior-inferior extent of the defect, only a small number of articles described the anterior-posterior and medial-lateral extent of the defect. Few articles listed dental status and soft palate involvement when describing maxillectomy defects. No classification system has accurately described the maxillectomy defect, based on criteria that satisfy both surgical and prosthodontic needs. The 6 criteria identified in this systematic review for a universal description of a maxillectomy defect are: 1) dental status; 2) oroantral/nasal communication status; 3) soft palate and other contiguous structure involvement; 4) superior-inferior extent; 5) anterior-posterior extent; and 6) medial-lateral extent of the defect. A criteria-based description appears more objective and amenable for universal use than a classification-based description. Copyright © 2012 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

RNAV STAR Procedural Adherence

NASA Technical Reports Server (NTRS)

Stewart, Michael J.; Matthews, Bryan L.

2017-01-01

In this exploratory archival study we mined the performance of 24 major US airports area navigation standard terminal arrival routes (RNAV STARs) over the preceding three years. Overlaying radar track data on top of RNAV STAR routes provided a comparison between aircraft flight paths and the waypoint positions and altitude restrictions. NASA Ames Supercomputing resources were utilized to perform the data mining and processing. We investigated STARs by lateral transition path (full-lateral), vertical restrictions (full-lateral/full-vertical), and skipped waypoints (skips). In addition, we graphed altitudes and their frequencies of occurrence for altitude restrictions. Full-lateral compliance was generally greater than Full-lateral/full-vertical, but the delta between the rates was not always consistent. Full-lateral/full-vertical usage medians of the 2016 procedures ranged from 0 in KDEN (Denver) to 21 in KMEM (Memphis). Waypoint skips ranged from 0 to nearly 100 for specific waypoints. Altitudes restrictions were sometimes missed by systemic amounts in 1000 ft. increments from the restriction, creating multi-modal distributions. Other times, altitude misses looked to be more normally distributed around the restriction. This work is a preliminary investigation into the objective performance of instrument procedures and provides a framework to track how procedural concepts and design intervention function. In addition, this tool may aid in providing acceptability metrics as well as risk assessment information.

Salvage rapid maxillary expansion for the relapse of maxillary transverse expansion after Le Fort I with parasagittal osteotomy

PubMed Central

2015-01-01

Maxillary transverse deficiency is one of the most common deformities among occlusal discrepancies. Typical surgical methods are segmental Le Fort I osteotomy and surgically-assisted rapid maxillary expansion (SARME). This patient underwent a parasagittal split with a Le Fort I osteotomy to correct transverse maxillary deficiency. During follow-up, early transverse relapse occurred and rapid maxillary expansion (RME) application with removal of the fixative plate on the constricted side was able to regain the dimension again. RME application may be appropriate salvage therapy for such a case. PMID:25922822

Blood-flow change and recovery of sensibility in the maxillary dental pulp during and after maxillary distraction: a pilot study.

PubMed

Harada, Kiyoshi; Sato, Masaru; Omura, Ken

2004-11-01

To examine the change in blood flow and recovery of sensibility in the maxillary dental pulp during and after maxillary distraction. The subjects included 5 patients undergoing high Le Fort I osteotomy and maxillary distraction (D-group) and a reference group of 14 patients who underwent a common single-segment Le Fort I osteotomy, 1-stage maxillary advancement, and mandibular setback surgery (C-group). Eleven (D-group) and 54 (C-group) maxillary incisors were assessed preoperatively and at 1-7 days, 14 days, and 3 months postoperatively. Pulpal blood flow (PBF) was measured by laser Doppler flowmetry, and pulpal sensibility (PS) was investigated by electrodiagnostics. From postoperative days 1 to 5 (the latency period), the PBF tended to be higher in the D-group than in the C-group. From day 6 to 3 months postoperatively (during and after maxillary distraction), the PBF values of the 2 groups were similar. The PS remained negative up to 14 days postoperatively in both groups. However, at 3 months after the operation, a higher proportion (90.9%) of teeth in the D-group was positive for PS. These results suggest that maxillary distraction is a favorable technique for maintenance of PBF and recovery of PS in the maxillary teeth after surgery.

Effect of rapid maxillary expansion and transpalatal arch treatment associated with deciduous canine extraction on the eruption of palatally displaced canines: A 2-center prospective study.

PubMed

Sigler, Lauren M; Baccetti, Tiziano; McNamara, James A

2011-03-01

Our aim was to investigate the effect of rapid maxillary expansion and transpalatal arch therapy combined with deciduous canine extraction on the eruption rate of palatally displaced canines (PDCs) in patients in the late mixed dentition in a 2-center prospective study. Seventy subjects were enrolled based on PDCs diagnosed on panoramic radiographs. The treatment group (TG, 40 subjects) underwent RME followed by TPA therapy and extraction of the deciduous canines. The control group (CG, 30 subjects) received no orthodontic treatment. At the start of the trial, panoramic radiographs and dental casts were compared between the TG and the CG with the Mann-Whitney U test (P <0.05). At the second observation (cervical vertebral maturation stage 5 or 6), all subjects were reevaluated, and the eruption of the maxillary permanent canines was assessed. The rates of success in the TG were compared with those in the CG by means of chi-square tests (P <0.05). The association of PDCs with other dental anomalies was reported. No statistically significant difference was found for any measurement at the start of the trial between the 2 groups. The prevalence rates of eruption of the maxillary canines were 80% for the TG and 28% in the CG, a statistically significant difference (chi-square =16.26, P <0.001). The prevalence rate at the start for the pubertal stages of cervical vertebral maturation (63%) was significantly greater in the unsuccessfully treated subjects than in the successfully treated ones (16%). In the CG, all successful subjects had PDCs that overlapped the corresponding deciduous canine or the distal aspect of the lateral incisor. Eruption of PDCs in both groups was associated significantly with an open root apex. Rapid maxillary expansion therapy followed by a transpalatal arch combined with extraction of the deciduous canine is effective in treating patients in the late mixed dentition with PDCs. Pretreatment variables indicating success of treatment on the eruption of PDCs were less severe sectors of displacement, prepubertal stages of skeletal maturity, and open root apices of PDCs. Several dental anomalies were associated significantly with PDCs, thus confirming the genetic etiology of this eruption disturbance. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Comparative morphology and paleobiology of Middle Pleistocene human remains from the Bau de l'Aubesier, Vaucluse, France.

PubMed

Lebel, S; Trinkaus, E; Faure, M; Fernandez, P; Guérin, C; Richter, D; Mercier, N; Valladas, H; Wagner, G A

2001-09-25

The discovery of later Middle Pleistocene human remains from the Bau de l'Aubesier, France reinforces an evolutionary model of the gradual accumulation of Neandertal-derived facial and dental features during the Middle Pleistocene of the northwestern Old World. The pronounced maxillary incisor beveling of Aubesier 4 helps to extend the antiquity of nondietary use of the anterior dentition. The interproximal "toothpick" groove on the Aubesier 10 molar increases the sample for these lesions. The pathological loss of the mandibular dentition of Aubesier 11 indicates advanced antemortem masticatory impairment, at a level previously undocumented before the Late Pleistocene. These remains support a view of later Middle Pleistocene humans able to support debilitated individuals despite the considerable use of their bodies to accomplish routine activities.

Skeletal anchorage for orthodontic correction of severe maxillary protrusion after previous orthodontic treatment.

PubMed

Tanaka, Eiji; Nishi-Sasaki, Akiko; Hasegawa, Takuro; Nishio, Clarice; Kawai, Nobuhiko; Tanne, Kazuo

2008-01-01

The correction of a severe maxillary protrusion in an adult by distal movement of the maxillary molars has been one of the most difficult biomechanical problems in orthodontics. This article reports on the treatment of an adult case of severe maxillary protrusion and a large overjet treated with a skeletal anchorage system. A female patient, age 22 years and 3 months, complained of the difficulty of lip closure due to severe maxillary protrusion with a gummy smile. Overjet and overbite were +7.6 mm and -0.9 mm, respectively. She had a history of orthodontic treatment in which her maxillary first premolars were extracted. In order to conduct distal movement of the maxillary molars, anchor plates were placed in the zygomatic process. After achieving a Class I molar relationship, retraction and intrusion of the maxillary incisors were performed. After a 2-year treatment, an acceptable occlusion was achieved with a Class I molar relationship. Her convex facial profile with upper lip protrusion was considerably improved, and the lips showed less tension in lip closure. After a 2-year retention period, an acceptable occlusion was maintained without recurrence of maxillary protrusion, indicating a stability of the occlusion. The result of this treatment indicated that skeletal anchorage is of great importance as a remedy for achieving intrusion and retraction of the maxillary incisors in cases of severe maxillary protrusion with a patient who had previous orthodontic treatment.

Anchorage condition during canine retraction using transpalatal arch with continuous and segmented arch mechanics.

PubMed

Alhadlaq, Adel; Alkhadra, Thamer; El-Bialy, Tarek

2016-05-01

To compare anchorage condition in cases in which transpalatal arch was used to enhance anchorage in both continuous and segmented arch techniques. Twenty cases that required first premolar extraction for orthodontic treatment and transpalatal arch to enhance anchorage were included in this study. Ten cases were treated using the continuous arch technique, while the other 10 cases were treated using 0.019 × 0.025-inch TMA T-loops with posterior anchorage bend according to the Burstone and Marcotte description. Lateral cephalometric analysis of before and after canine retraction was performed using Ricketts analysis to measure the anteroposterior position of the upper first molar to the vertical line from the Pt point. Data were analyzed using an independent sample t-test. There was a statistically significant forward movement of the upper first molar in cases treated by continuous arch mechanics (4.5 ± 3.0 mm) compared with segmented arch mechanics (-0.7 ± 1.4 mm; P  =  .01). The posterior anchorage bend to T-loop used to retract the maxillary canine can enhance anchorage during maxillary canine retraction.

Clinical recommendation for treatment planning of sinus augmentation procedures by using presurgical CAT scan images: a preliminary report.

PubMed

Kutkut, Ahmad M; Andreana, Sebastiano; Kim, Hyeong-Ll; Monaco, Edward

2011-12-01

To propose a clinical recommendation based on anatomy of maxillary sinus before sinus augmentation procedure using presurgical computerized axial tomography (CAT) scan images. CAT scan images were randomly selected from previous completed implant cases. Proposed area for the lateral window osteotomy was outlined on the panorex image of the CAT scan. Sagittal section on the CAT scan that was in the center of the outlined window was selected for sinus measurement analysis. On CAT scan, 2 lines were drawn to measure the dimensions of sinus. One line measured the horizontal width and the other line measured the vertical height. Based on the measurement data, a classification of the maxillary sinus anatomy was proposed. Narrow sinus cavity indicates favorable type anatomy in terms of bone regeneration healing and wide sinus cavity as less favorable anatomy for patient treatment planning. A narrow sinus and greater exposure to the blood supply should require shorter healing times after grafting. Conversely, wider sinus cavities and less exposure to the blood supply would require a longer healing time before implant placement.

[Alveolar bone thickness in A point area : how to avoid periodontal failures in front of upper incisors].

PubMed

Chevalier, Émilie; Philip-Alliez, Camille; Le Gall, Michel

2016-03-01

Studies on orthodontic-periodontics relationships are numerous but few have benefited from the contribution of new 3D imaging techniques that emphasize iatrogenic effects that orthodontics may have on the periodontium. Periodontal risk in terms of fenestration, bone dehiscences next maxillary incisors are real during or after orthodontic treatment. The accurate assessment of the initial situation in terms of bone quantity in this dental arch anterior segment is thus very important. Our study aimed to evaluate the reliability of conventional lateral cephalograms to quantify alveolar bone thickness in relation to the maxillary incisors by comparing it with data from CT scans. The second objective was to identify an at risk patient profile by assessing possible correlations between this thickness and dysmorphia components. The results revealed a half of assessment error in the estimation of bone thickness and increased risk in case of hyperdivergence typology, Class III skeletal relationships and dento-alveolar protrusion. Finally, in view of these data, we discussed the clinical procedures to avoid such periodontal failures in this anterior segment of the dental arch. © EDP Sciences, SFODF, 2016.

An in-vitro comparison of the radiographic and actual gutta-percha terminus.

PubMed

Namazikhah, M S; Ghiai, M; Parkin, M J; Puccinelli, L

2000-06-01

The purpose of this study was to investigate the difference between the radiographic gutta-percha terminus and the actual gutta-percha terminus of human molars by comparing radiographic obturation results with actual obturation results. Forty maxillary palatal roots and 50 mandibular distal roots were randomly selected from a population of 540. They were then mounted in stone and radiographed. Conventional endodontic therapy was completed using stainless-steel K files and lateral condensation. Each radiographic gutta-percha terminus was evaluated under 4.5x magnification by three examiners following the completion of root canal therapy. These results were recorded. Each tooth was then removed from its mounting, and the actual gutta-percha terminus was evaluated under 4.5x magnification. These results were recorded and compared to the radiographic gutta-percha terminus results. In all 90 teeth examined, the actual gutta-percha terminus was equal to or longer than the radiographic gutta-percha terminus. In the 50 mandibular distal roots, the actual gutta-percha terminus averaged 0.645 mm longer than the radiographic gutta-percha terminus. In the 40 maxillary palatal roots, this difference measured 0.6375 mm.

Computed tomography-based volumetric tool for standardized measurement of the maxillary sinus

PubMed Central

Giacomini, Guilherme; Pavan, Ana Luiza Menegatti; Altemani, João Mauricio Carrasco; Duarte, Sergio Barbosa; Fortaleza, Carlos Magno Castelo Branco; Miranda, José Ricardo de Arruda

2018-01-01

Volume measurements of maxillary sinus may be useful to identify diseases affecting paranasal sinuses. However, literature shows a lack of consensus in studies measuring the volume. This may be attributable to different computed tomography data acquisition techniques, segmentation methods, focuses of investigation, among other reasons. Furthermore, methods for volumetrically quantifying the maxillary sinus are commonly manual or semiautomated, which require substantial user expertise and are time-consuming. The purpose of the present study was to develop an automated tool for quantifying the total and air-free volume of the maxillary sinus based on computed tomography images. The quantification tool seeks to standardize maxillary sinus volume measurements, thus allowing better comparisons and determinations of factors that influence maxillary sinus size. The automated tool utilized image processing techniques (watershed, threshold, and morphological operators). The maxillary sinus volume was quantified in 30 patients. To evaluate the accuracy of the automated tool, the results were compared with manual segmentation that was performed by an experienced radiologist using a standard procedure. The mean percent differences between the automated and manual methods were 7.19% ± 5.83% and 6.93% ± 4.29% for total and air-free maxillary sinus volume, respectively. Linear regression and Bland-Altman statistics showed good agreement and low dispersion between both methods. The present automated tool for maxillary sinus volume assessment was rapid, reliable, robust, accurate, and reproducible and may be applied in clinical practice. The tool may be used to standardize measurements of maxillary volume. Such standardization is extremely important for allowing comparisons between studies, providing a better understanding of the role of the maxillary sinus, and determining the factors that influence maxillary sinus size under normal and pathological conditions. PMID:29304130

Long- and short-term effects of headgear traction with and without the maxillary second molars.

PubMed

Shpack, Nir; Brosh, Tamar; Mazor, Yoav; Shapinko, Yoav; Davidovitch, Moshe; Sarig, Rachel; Reimann, Susanne; Bourauel, Christoph; Vardimon, Alexander D

2014-10-01

A quantitative assessment of maxillary first molar distalization with and without the maxillary second molar (M2) was carried out. Fifty-six cervical headgear patients undergoing fixed appliance orthodontic treatment were divided into 2 groups: before (G - M2) and after (G + M2) eruption of the maxillary second molars (ages, 11.87 ± 1.20, and 13.05 ± 1.55 years, respectively). The tightness of the dental contact point (TDCP) and the space between the second premolar and the maxillary first molar were measured at 6 levels of headgear force (0-15 N) at 3 intervals 6 months apart (T0, T1, T2). Relationships were found between space and TDCP, time, and presence or absence of the maxillary second molar at T1 and T2 (P <0.001). The TDCP decreased and space increased with increase in initial headgear force. An increase in initial force beyond 6 to 9 N did not significantly increase the initial maxillary first molar distalization. The G - M2 TDCP and space measurements were similar to those of G + M2 at T2 with the eruption of the maxillary second molar. From T0 to T1, maxillary first molar distalization was greater in G - M2. In comparison with our previous headgear-alone study, initial distalization with a fully bonded appliance was reduced by 4-fold. Headgear therapy is more effective before the eruption of the maxillary second molar. Once it erupts, the distalization pace of the maxillary first molar is reduced, but it can nevertheless be pursued at a slower pace when the maxillary second molar is present. Copyright © 2014 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Measurement of Lacrimal Sac Fossa Using Orbital Computed Tomography.

PubMed

Kang, Dongwan; Park, Jinhwan; Na, Jaehoon; Lee, Hwa; Baek, Sehyun

2017-01-01

To evaluate the clinical usefulness of measuring the lacrimal sac fossa length using orbital computed tomography in normal Koreans. The authors retrospectively evaluated 140 patients (70 males and 70 females) who underwent orbital computed tomography at Guro Hospital and who had no history of orbital disease or orbital trauma. Computed tomography scans of the right orbit, including the proportion of the lacrimal bone and maxillary bone that comprise the lacrimal sac fossa, were evaluated at 3 different axial planes (lower, middle, and upper levels). Additionally, the mid-point thickness and maximum thickness of the maxillary bone were measured. Finally, the authors also evaluated the relationship between nasal bone height and maxillary bone thickness in the lacrimal sac fossa. Maxillary bone thickness in the lacrimal sac fossa was thicker in males than in females at mid-point thickness and maximum thickness (P < 0.05). However, there was no significant difference in the size of the lacrimal sac fossa and the proportion of the maxillary bone between males and females.In comparisons between maxillary cross-sections, bone thickness was greater toward the upper level of the lacrimal sac fossa (P = 0.008), and the proportion of the maxillary bone was also greater (P = 0.006).Aging had a significant positive correlation with maxillary bone thickness at all 3 axial planes (P < 0.05), but there was no relationship between age and maxillary bone proportion. Nasal bone height and maxillary bone thickness were also not significantly related. In comprising the lacrimal sac fossa, the maxillary bone accounted for a bigger proportion than the lacrimal bone. Male maxillary bone thickness was greater than female thickness. The authors also observed that maxillary bone thickness increased toward the upper areas of the lacrimal sac fossa and with increasing subject age. Understanding the form and variation of a normal lacrimal sac fossa is helpful for preparing for a successful osteotomy with endoscopic dacryocystorhinostomy.

Retrospective study of root canal configurations of maxillary third molars in Central India population using cone beam computed tomography Part- I

PubMed Central

Rawtiya, Manjusha; Somasundaram, Pavithra; Wadhwani, Shefali; Munuga, Swapna; Agarwal, Manish; Sethi, Priyank

2016-01-01

Objective: The aim of this study was to investigate the root and canal morphology of maxillary third molars in Central India population using cone-beam computed tomography (CBCT) analysis. Materials and Methods: CBCT images of 116 maxillary third molars were observed, and data regarding the number of roots, the number of canals, and Vertucci's Classification in each root was statistically evaluated. Results: Majority of Maxillary third molars had three roots (55.2%) and three canals (37.9%). Most MB root (43.8%), DB root (87.5%), and palatal root (100%) of maxillary third molars had Vertucci Type I. Mesiobuccal root of three-rooted maxillary third molars had Vertucci Type I (43.8%) and Type IV (40.6%) configuration. Overall prevalence of C-shaped canals in maxillary third molars was 3.4%. Conclusion: There was a high prevalence of three-rooted maxillary molars with three canals. PMID:27011747

Performance Testing of Lidar Components Subjected to Space Exposure in Space via MISSE 7 Mission

NASA Technical Reports Server (NTRS)

Prasad, Narasimha S.

2012-01-01

.The objective of the Materials International Space Station Experiment (MISSE) is to study the performance of novel materials when subjected to the synergistic effects of the harsh space environment for several months. MISSE missions provide an opportunity for developing space qualifiable materials. Several laser and lidar components were sent by NASA Langley Research Center (LaRC) as a part of the MISSE 7 mission. The MISSE 7 module was transported to the international space station (ISS) via STS 129 mission that was launched on Nov 16, 2009. Later, the MISSE 7 module was brought back to the earth via the STS 134 that landed on June 1, 2011. The MISSE 7 module that was subjected to exposure in space environment for more than one and a half year included fiber laser, solid-state laser gain materials, detectors, and semiconductor laser diode. Performance testing of these components is now progressing. In this paper, the current progress on post-flight performance testing of a high-speed photodetector and a balanced receiver is discussed. Preliminary findings show that detector characteristics did not undergo any significant degradation.

Aberrant growth of maxillary canine teeth in male babirusa (genus Babyrousa).

PubMed

Macdonald, Alastair A

2018-04-01

A worldwide survey of babirusa skulls curated in museum and private collections located 431 that were from adult males and had retained at least one maxillary canine tooth. Eighty-three of these skulls were identified as exhibiting aberrant maxillary canine tooth growth. Twenty-four of the skulls represented babirusa from Buru and the Sula Islands, and forty-five skulls represented babirusa from Sulawesi and the Togian Islands. The remaining series of fourteen babirusa skulls originally came from zoo animals. Fifteen skulls showed anomalous alveolar and tooth rotation in a median plane. Twenty-nine skulls had maxillary canine teeth that did not grow symmetrically towards the median plane of the cranium. Fourteen skulls showed evidence that the tips of one or both maxillary canine teeth had eroded the nasal bones. Twenty-one skulls had maxillary canine teeth that had eroded the frontal bones. The teeth of two skulls had eroded a parietal bone. One skull had two maxillary canines arising from an adjacent pair of alveoli on the left side of the cranium. Three skulls exhibited alveoli with no formed maxillary canine teeth in them. Analysis suggested that approximately 12% of the adult male babirusa in the wild experience erosion of the cranial bony tissues as a result of maxillary canine tooth growth. There was no skeletal evidence that maxillary canine teeth penetrate the eye. Crown Copyright © 2018. Published by Elsevier Masson SAS. All rights reserved.

Orthognathic surgery in the young cleft patient: preliminary study on subsequent facial growth.

PubMed

Wolford, Larry M; Cassano, Daniel Serra; Cottrell, David A; El Deeb, Mohamed; Karras, Spiro C; Goncalves, Joao Roberto

2008-12-01

This study evaluated the long-term effects of orthognathic surgery on subsequent growth of the maxillomandibular complex in the young cleft patient. We evaluated 12 young cleft patients (9 male and 3 female patients), with a mean age of 12 years 6 months (range, 9 years 8 months to 15 years 4 months), who underwent Le Fort I osteotomies, with maxillary advancement, expansion, and/or downgrafting, by use of autogenous bone or hydroxyapatite grafts, when indicated, for maxillary stabilization. Five patients had concomitant osteotomies of the mandibular ramus. All patients had presurgical and postsurgical orthodontic treatment to control the occlusion. Radiographs taken at initial evaluation (T1) and presurgery (T2) were compared to establish the facial growth vector before surgery, whereas radiographs taken immediately postsurgery (T3) and at longest follow-up (T4) were used to determine postsurgical growth. Each patient's lateral cephalograms were traced, and 16 landmarks were identified and used to compute 11 measurements describing presurgical and postsurgical growth. Before surgery, all patients had relatively normal growth. After surgery, cephalograms showed statistically significant growth changes from T3 to T4, with the maxillary depth decreasing by -3.3 degrees +/- 1.8 degrees , Sella-nasion-point A by -3.3 degrees +/- 1.8 degrees, and point A-nasion-point B by -3.6 degrees +/- 2.8 degrees. The angulation of the maxillary incisors increased by 9.2 degrees +/- 11.7 degrees. Of 12 patients, 11 showed disproportionate postsurgical jaw growth. Maxillary growth occurred predominantly in a vertical vector with no anteroposterior growth, even though most patients had shown anteroposterior growth before surgery. The distance increased in the linear measurement from nasion to gnathion by 10.3 +/- 7.9 mm. Four of 5 patients operated on during the mixed dentition phase had teeth that erupted through the cleft area. A variable impairment of postoperative growth was seen with the 2 types of grafting material used. No significant difference was noted in the effect on growth in patients with unilateral clefts versus those with bilateral clefts. The presence of a pharyngeal flap was noted to adversely affect growth, whereas simultaneous mandibular surgery did not. After surgery, 11 of 12 patients tended toward a Class III end-on occlusal relation. Orthognathic surgery may be performed on growing cleft patients when mandated by psychological and/or functional concerns. The surgeon must be cognizant of the adverse postsurgical growth outcomes when performing orthognathic surgery on growing cleft patients with the possibility for further surgery requirements. Performing maxillary osteotomies on cleft patients would be more predictable after completion of facial growth.

Implant replacement of the maxillary central incisor utilizing a modified ceramic abutment (Thommen SPI ART) and ceramic restoration.

PubMed

Schneider, Robert

2008-01-01

The prosthetic restoration of a missing anterior tooth with a dental implant is a challenge. Treatment coordination with a multidisciplinary team is critical in the successful outcome of this type of patient treatment. Newer surgical treatment modalities in the management of hard and soft tissues are becoming common, with very good predictability and long-term stability. Additionally, the use of advanced dental technology and materials such as sintered zirconium allows the restorative practitioner the opportunity to fabricate an esthetic, precise-fitting, biocompatible, and strong definitive prosthesis for the patient, with good longevity. The use of an all-ceramic abutment and restoration is described, along with the "soft tissue sculpting" procedure through the use of a custom provisional restoration. The relative ease and convenience of the procedure is also illustrated.

Vector alignment in maxillary distraction osteogenesis.

PubMed

Uckan, Sina; Arman, Ayca; Bayram, Burak; Celik, Erkan

2006-09-01

Maxillary distraction osteogenesis is an alternative treatment of cleft patients with severe maxillary hypoplasia. The aim of this paper is to present the combined surgical/orthodontic treatment of a cleft lip and palate patient and to evaluate the maxillary distraction procedure and the distraction vector in high Le Fort I osteotomy.

Class III malocclusion with complex problems of lateral open bite and severe crowding successfully treated with miniscrew anchorage and lingual orthodontic brackets.

PubMed

Yanagita, Takeshi; Kuroda, Shingo; Takano-Yamamoto, Teruko; Yamashiro, Takashi

2011-05-01

In this article, we report the successful use of miniscrews in a patient with an Angle Class III malocclusion, lateral open bite, midline deviation, and severe crowding. Simultaneously resolving such problems with conventional Class III treatment is difficult. In this case, the treatment procedure was even more challenging because the patient preferred to have lingual brackets on the maxillary teeth. As a result, miniscrews were used to facilitate significant asymmetric tooth movement in the posterior and downward directions; this contributed to the camouflage of the skeletal mandibular protrusion together with complete resolution of the severe crowding and lateral open bite. Analysis of the jaw motion showed that irregularities in chewing movement were also resolved, and a stable occlusion was achieved. Improvements in the facial profile and dental arches remained stable at the 18-month follow-up. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

[Hyphessobrycon taphorni and H. eschwartzae (Teleostei: Characidae) two new species of fish in the basin of Madre de Dios river, Peru].

PubMed

Garcia-Alzate, Carlos A; Romin-Valencia, César; Ortega, Hernán

2013-06-01

Hyphessobrycon with 129 valid species, is a genus of fish that has a great diversity of species in the Neotropical ichthyofauna, reaches its greatest diversity in the Amazon basin with about 70% of these species, is highly desired by hobbyists because of their beauty and color, and are still meeting new species. We analyzed specimens from the Departamento de Ictiología, Museo de Historia Natural de la Universidad Mayor de San Marcos, Lima, Perú (MUSM); and measurements of the specimens were taken point to point with digital calipers. Observations of bone and cartilage structures were made on cleared and stained (C&S) samples. The morphometric relationships between species using 21 variables were explored using a principal component analysis (PCA). Here we describe two new species, Hyphessobrycon taphorni and H. eschwartzae from the Madre de Dios River drainage, Peru. Hyphessobrycon taphorni sp. n. can be distinguished by the number of dorsal-fin rays (iii, 8), by the number of: pored lateral-line scales (4-5), teeth in the outer premaxillary row (1-2), teeth in the inner premaxillary row (7-8), by: the caudal-peduncle length (11.4-16.4% SL), number of lateral scales (28-29, except from H. loretoensis which has 29-30) and absence of a humeral spot (vs. present), it differs from H. loretoensis by the number of: scales between the lateral line and the anal fin origin (4 vs. 3) and maxillary teeth (2 vs. 3-4), and it differs from H. agulha by the number of branched pectoral-fin rays (11-12 vs. 9-10). Hyphessobrycon eschwartzae sp. n. is distinguished by the number of: simple anal-fin rays (iv), teeth on the dentary (13-15), teeth in the inner premaxillary row (6), teeth in the outer premaxillary row (3, except from H. heterorhabdus and H. loretoensis which have 3-4); it differs from H. loretoensis by the number of: pored lateral-line scales (7 vs. 9-10), scales between the lateral line and the dorsal-fin origin (5 vs. 3-4); it differs from H. agulha in the number of lateral scales (30-31 vs. 33-34), by the number of: predorsal scales (9 vs. 10), maxillary teeth (4 vs. 0-1); in having in life a red lateral stripe above the dark lateral stripe that extends from the posterior part of the opercle to the caudal peduncle (vs. absent) and by the presence of bony hooks in mature males only on the anal fin (vs. hooks on all fins, including the caudal).

Maxillary Anterior Segmental Distraction Osteogenesis to Correct Maxillary Deficiencies in a Patient With Cleft Lip and Palate.

PubMed

Kageyama-Iwata, Asuka; Haraguchi, Seiji; Iida, Seiji; Aikawa, Tomonao; Yamashiro, Takashi

2017-07-01

This report describes a case of successful orthodontic treatment using maxillary anterior segmental distraction osteogenesis with an internal maxillary distractor and bilateral sagittal split ramus osteotomy in a girl with cleft lip and palate. A 16-year-old girl with unilateral cleft lip and palate exhibited midface retrusion because of growth inhibition of the maxillary complex and mandibular excess. After the presurgical orthodontic treatment, 6.0-mm advancement of the maxillary anterior segment and 4.0-mm set back of the mandible were performed. After a retention period, the patient's midface convexity was greatly improved and the velopharyngeal competence was preserved without relapse.

[Cone-beam CT evaluation of nasomaxillary complex and upper airway following rapid maxillary expansion].

PubMed

Li, Lei; Qi, Suqing; Wang, Hongwei; Ren, Sufeng; Ban, Jiandong

2015-07-01

To evaluate the naso-maxillary complex width and pharyngeal airway volume changes after rapid maxillary expansion (RME). Thirty-five patients were selected (18 males, 17 females, mean age, 12.1 ± 1.1 years). All patients underwent orthodontic treatment with Hyrax palatal expanders. Cone-beam CT (CBCT) scan was taken before treatment (T0), 16 days (T1) and three months (T3) after RME. Naso-maxillary complex width and pharyngeal airway volume were measured. After treatment the width of piriform aperture and maxillary width were significantly increased compared with that before treatment (P < 0.05). Three months after RME, no statistical difference was found in maxillary width compared with that before treatment. The nasopharyngeal volume significantly increased by 29.9% compared with that before treatment (P < 0.05), and the volume remained relatively stable after three months. RME resulted in a significant increase in the naso-maxillary complex width and nasopharyngeal volume.

Anatomy and ontogeny of a novel hemodynamic organ in zebrafish.

PubMed

Binelli, Erica A; Luna, Alejandra N; LeClair, Elizabeth E

2014-12-01

The zebrafish maxillary barbel can protract and retract in response to stimuli, and appears connected to a prominent blood sinus on the lateral aspect of the maxillary bone. However, the mechanism of barbel movement is not described. Using whole-mount phalloidin staining of the sinus region, we observed long filamentous actin cables, suggesting highly organized vascular smooth muscle cells, surrounding an endothelial chamber. Although the chamber is variably filled by erythrocytes in vivo, cardiac injection of fluorescent dextrans shows that it consistently contains plasma. Full-thickness confocal imaging of dextran-injected adults containing EGFP(+) endothelial cells revealed a vascular complex with three compartments, here named the distal bulb, central chamber, and accessory chamber. The early ontogeny of all three compartments was confirmed in a whole-mount series of Tg(fli1a:EGFP) juveniles. In wild type adults, the fine structure of each chamber was studied using paraffin- and plastic-section histochemistry and transmission electron microscopy. The distal bulb and central chamber have smooth muscle coats with luminally-elongated septa, forming semi-detached blood-filled lacunae. The central chamber walls and septa are extensively innervated by small, unmyelinated axons, as confirmed by immunohistochemical detection of acetylated tubulin, a component of axonal cytoplasm. The accessory chamber appears neither innervated nor muscularized, but is an endothelial cul-de-sac with a thickened elastic adventitia, suggesting an extensible fluid reservoir. We propose that we have identified a new organ in zebrafish, the maxillary barbel blood sinus, whose neurovascular specializations may contribute to zebrafish sensory biology and appendage control. © 2014 Wiley Periodicals, Inc.

Upper full arch rehabilitation with sinus by-pass with tilted implants via tapered-threaded expanders in low density bone: a clinical trial.

PubMed

Andreasi Bassi, M; Andrisani, C; Lico, S; Ormanier, Z; Arcuri, C

2016-01-01

In the present paper the use of tapered-screw bone expanders (TSBEs) is proposed, in combination with the placement of tilted implants, in close proximity to the anterior sinus wall, solving the problem of the reduced height of the alveolar bone in the sub-antral area. The Authors present a case series of full-arch rehabilitations performed with this procedure named: Tilted Implant Expansion Osteotomy (TIEO). 12 patients (5 males and 7 females, average age 58.5 ± 8.1 years) with totally or partially edentulous maxilla were enrolled in this study. For each patient 4 implants were placed, the anterior implants in the area of lateral incisors or canines while, the posterior implants, immediately in front of the maxillary sinus, with an inclined position. Adopting the aforesaid procedure, 48 cylindrical two-piece implants were placed, 24 of which were placed in tilted position, in order to by-pass the maxillary sinus. After a healing period of 6 months, the second stage surgery was performed. The cases were finalized by means of a hybrid metal-acrylic prosthesis. The post finalization follow-up was at 12 months. Survival rate was 100% since none fixtures were lost. At the one-year follow up the clinical and radiological appearance of the soft and hard tissues was optimal and no pathological signs were recorded. TIEO is a promising surgical procedure for full-arch rehabilitation of maxillary edentulous sites and represents a therapeutic alternative to sinus lift techniques.

Width ratios in the anterior maxillary region in a Hungarian population: addition to the golden proportion debate.

PubMed

Forster, András; Velez, Róbert; Antal, Márk; Nagy, Katalin

2013-09-01

In the last 2 decades, several studies have questioned the application of the rule of golden proportion in dentistry. The purpose of this study was to test the rule of golden proportion for the maxillary anterior region in a population of young, healthy people with excellent oral hygiene at the Faculty of Dentistry of the University of Szeged. One hundred and nine participants (36 male, 73 female) were examined, 41 of whom had previously worn orthodontic appliances. A Canon 450D camera, Canon 100 mm Macro lens, and a Sigma 140 DG ring flash were used for digital documentation. The accreditation photography protocol of the American Academy of Cosmetic Dentistry was applied to standardize the images. The width of the teeth from the frontal view was measured digitally. Tooth dimension data were collected and the Mann-Whitney U test was performed (α=.05). The relative width of the central incisors, lateral incisors, and canines was 1.6:1:0.85 on both sides. The ratios were not influenced by either sex or previous orthodontic treatment. The results demonstrated that, because of the difference in canines in this population, the golden proportion in its original form was not valid for the maxillary anterior region. Orthodontic treatment does not change the dentition toward the golden proportion. The results suggest that the rule of golden proportion should not be used for treatment planning without observing individual modifying factors. Copyright © 2013 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Comparing esthetic smile perceptions among laypersons with and without orthodontic treatment experience and dentists

PubMed Central

An, Seong-Mu; Choi, Sun-Young; Chung, Young-Wook; Jang, Tae-Ho

2014-01-01

Objective The purpose of this study was to examine whether orthodontic treatment experience affects the individual's perception of smile esthetics and to evaluate differences among orthodontically treated laypersons, non-treated laypersons, and dentists by using computerized image alterations. Methods A photograph of a woman's smile was digitally altered using a software image editing program. The alterations involved gingival margin height, crown width and length, incisal plane canting, and dental midline of the maxillary anterior teeth. Three groups of raters (orthodontically treated laypersons, non-treated laypersons, and dentists) evaluated the original and altered images using a visual analog scale. Results The threshold for detecting changes in maxillary central incisor gingival margin height among laypersons was 1.5 mm; the threshold of dentists, who were more perceptive, was 1.0 mm. For maxillary lateral incisor crown width and height, the threshold of all three groups was 3.0 mm. Canting of the incisal plane was perceived when the canting was 3.0 mm among non-treated laypersons, 2.0 mm among treated laypersons, and 1.0 mm among dentists. Non-treated laypersons could not perceive dental midline shifts; however, treated laypersons and dentists perceived them when the shift was ≥ 3.0 mm. Conclusions Laypersons with and without orthodontic treatment experience and dentists have different perceptions of smile esthetics. Orthodontically treated laypersons were more critical than non-treated laypersons regarding incisal plane canting and dental midline shifts. Based on these findings, it is suggested that orthodontic treatment experience improved the esthetic perceptions of laypersons. PMID:25473645

Pattern of maxillary and mandibular proximal enamel thickness at the contact area of the permanent dentition from first molar to first molar.

PubMed

Sarig, Rachel; Vardimon, Alexander D; Sussan, Celine; Benny, Lea; Sarne, Ofer; Hershkovitz, Israel; Shpack, Nir

2015-04-01

Proximal enamel thickness (PET) at the mesial and distal contact areas of the complete permanent dentition has not been previously reported. Anatomic investigation of PET is essential for interproximal reduction treatment. Our objectives were to measure the PETs of the complete maxillary and mandibular dentitions at the contact areas, to compare the PETs of adjacent teeth, and to evaluate the vertical position of each contact area. We evaluated 720 extracted teeth; of these, 109 intact teeth were selected. The mesial and distal contact areas were demarcated, and each tooth was embedded in transparent epoxy resin. Blocks were prepared so that the 2 demarcated contact areas were exposed, and 6 measurements were taken and statistically analyzed. Both jaws showed the same PET pattern characterized by 5 features: PET increased progressively from incisor (0.63 mm) to first molar (1.48 mm). Per tooth, mesial and distal PET did not differ. Total maxillary (26.86 mm) and mandibular (24.52 mm) PETs were similar. Paired PETs at the interproximal interface were similar, with the exception of the lateral incisor-canine interfaces. From incisor to first molar, the contact area becomes located farther gingivally. The existing guideline of maximal 0.5-mm interproximal reduction per 2 adjacent teeth should be kept in the anterior region and could be increased to 1 mm in the posterior region, when an equal amount is removed. Copyright © 2015 American Association of Orthodontists. Published by Elsevier Inc. All rights reserved.

Stress distribution and displacement by different bone-borne palatal expanders with micro-implants: a three-dimensional finite-element analysis.

PubMed

Lee, Hye Kyung; Bayome, Mohamed; Ahn, Chee Soo; Kim, Seong-Hun; Kim, Ki Beom; Mo, Sung-Seo; Kook, Yoon-Ah

2014-10-01

The aim of this study was to analyze stress distribution and displacement of the maxilla and teeth according to different designs of bone-borne palatal expanders using micro-implants. A three-dimensional (3D) finite-element (FE) model of the craniofacial bones and maxillary teeth was obtained. Four designs of rapid maxillary expanders: one with micro-implants placed lateral to mid-palatal suture (type 1), the second at the palatal slope (type 2), the third as in type 1 with additional conventional Hyrax arms (type 3), and the fourth surgically assisted tooth-borne expander (type 4) were added to the FE models. Expanders were activated transversely for 0.25mm. Geometric nonlinear theory was applied to evaluate Von-Mises Stress distribution and displacement. All types exhibited downward displacement and demonstrated more horizontal movement in the posterior area. Type 3 showed the most transverse displacement. The rotational movement of dentoalveolar unit was larger in types 1 and 3, whereas it was relatively parallel in types 2 and 4. The stresses were concentrated around the micro-implants in types 1 and 3 only. Type 2 had the least stress concentrations around the anchorage and showed alveolar expansion without buccal inclination. It is recommended to apply temporary anchorage devices to the palatal slopes to support expanders for efficient treatment of maxillary transverse deficiency. © The Author 2012. Published by Oxford University Press on behalf of the European Orthodontic Society. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Prevalence of hypodontia in nine- to fourteen-year-old children who attended the Mashhad School of Dentistry.

PubMed

Ajami, Behgat-al-molok; Shabzendedar, Mahboobeh; Mehrjerdian, Maryam

2010-01-01

Hypodontia is defined as the congenital absence of one or a few teeth, and is also the most common anomaly in dental development. This condition occurs either individually or as part of the symptoms of a syndrome, and it is more common in permanent teeth than in deciduous teeth, reporting a prevalence of between 1.6 and 9.6%. The objective of this study is to investigate the prevalence of hypodontia for permanent teeth in nine- to 14-year-old children who attended the Mashhad School of Dentistry in 2007. We conducted this descriptive, analytical, cross-sectional study, to determine the mentioned aims. In this descriptive, cross-sectional study, panoramic radiographs belonging to 600 children (351 girls and 249 boys), aged nine to 14 years, were available for examination. All related findings were recorded in the respective forms. The data were processed using Exact and Chi-square tests. The prevalence of hypodontia in the girls was 9.2%, in the boys 8.8%, and in both sexes combined 9%. The most and the least frequent cases of absent teeth were the mandibular second premolars and the maxillary central incisor (only one child), respectively. The most commonly absent teeth were the mandibular second premolars, the maxillary lateral incisors, the mandibular central incisor, and the maxillary second premolars, in that order. This study showed a high frequency of hypodontia among the understudied population. Thus, due to the complicated treatment, accurate examination of children for on-time diagnosis of this developmental anomaly is crucial.

Tooth-borne distraction osteogenesis versus conventional Le Fort I in maxillary advancement of cleft lip and palate patients.

PubMed

Jamilian, Abdolreza; Showkatbakhsh, Rahman; Behnaz, Mohammad; Ghassemi, Alireza; Kamalee, Zinat; Perillo, Letizia

2018-01-31

Distraction osteogenesis (DO) is rapidly becoming a mainstream surgical technique for correction of maxillary deficiency. The aim of this study was to compare the effectiveness of a newly designed tooth-borne osteogenic distraction device with conventional LeFort 1 osteotomy in maxillary advancement of cleft lip and palate patients. The DO group consisted of 10 subjects (7 males, 3 females) with a mean age of 21.2 (SD 4.2) years. In these patients, the newly designed distraction device which exerted force anteroposteriorly was cemented after mobilization of the maxilla. After a latency period of 7 days, the distractor was activated twice daily by a total amount of 0.5 mm per day. The activation was continued for 3 weeks. After an 8-week consolidation period, the distraction appliance was removed. Cephalograms of DO patients were obtained at the start of distraction and at the end of consolidation. The LeFort 1 group consisted of 11 subjects (6 males, 5 females) with a mean age of 22.3 (SD 3.7) years. Pre and post-surgery lateral cephalograms were obtained. T-Test and paired T-test were used to evaluate the data. At the end of treatment, the SNA angle of LeFort 1 patients increased by 5.5° (SD 2.3) (P<0.001) and the SNA angle of DO patients increased by 3.4° (SD 2) (P<0.001). Current evidence suggests that both conventional LeFort 1 and tooth-borne osteogenic distraction device can effectively advance the maxilla forward in patients with cleft lip.

Maxillary Distraction Osteogenesis Using a Rigid External Distractor: Which Clinical Factors Are Related With Relapse?

PubMed

Kim, Jeenam; Uhm, Ki-Il; Shin, Donghyeok; Lee, Jina; Choi, Hyungon

2015-06-01

Maxillary distraction osteogenesis is a reliable treatment for cleft lip and palate with midfacial retrusion. The purpose of this study was to evaluate the results of long-term follow-up in patients with cleft lip and palate after maxillary distraction osteogenesis and to find clinical factors related to relapse. From February 2002 to June 2008, 21 patients with severe class III malocclusion were treated at our hospital. We performed distraction osteotomy with a rigid external distractor device. The distraction length was more than 15 mm in all patients. Preoperative and postoperative lateral cephalometric radiographs were used for analysis. The sella-nasion-subnasale, sella-nasion-supramentale, and point-A-point-B-nasion (sella-nasion-subnasale-sella-nasion-supramentale) angles were recorded. The timelines for follow-up were preoperatively, after distraction, after consolidation, at 3 years, and once fully grown (5- to 8-year follow-ups). A comparative analysis of clinical factors was performed for the relapsing and nonrelapsing groups. Of the 21 patients, 14 had relapsed. The mean age in the relapsing group was 9.1 years (7 boys and 7 girls) with 9 patients with unilateral cleft palate and 5 c bilateral cleft palate. The mean age in the nonrelapsing group was 11.7 years (4 boys and 3 girls) with 5 patients with unilateral cleft palate and 2 patients with bilateral cleft palate. Despite greater anterior overcorrection, relapse occurred owing to scar tissue retraction and mandibular compensatory hypertrophy. The results suggest that the younger the patient, the more likely relapse will occur.

Influence of magnification and superimposition of structures on cephalometric diagnosis.

PubMed

Paula, Leonardo Koerich de; Solon-de-Mello, Priscilla de Almeida; Mattos, Claudia Trindade; Ruellas, Antônio Carlos de Oliveira; Sant'Anna, Eduardo Franzotti

2015-01-01

The purpose of this study was to assess the influence of magnification and superimposition of structures on CBCT-generated lateral cephalometric radiographs (LCR) using different segments of the cranium. CBCT scans of 10 patients were selected. Four LCR were generated using Dolphin Imaging(r) software: full-face, right side, left side and center of the head. A total of 40 images were imported into Radiocef Studio 2(r), and the angles of the most common cephalometric analyses were traced by the same observer twice and within a 10-day interval. Statistical analyses included intraexaminer agreement and comparison between methods by means of intraclass correlation coefficient (ICC) and Bland-Altman agreement tests. Intraexaminer agreement of the angles assessed by ICC was excellent (> 0.90) for 83% of measurements, good (between 0.75 and 0.90) for 15%, and moderate (between 0.50 and 0.75) for 2% of measurements. The comparison between methods by ICC was excellent for 68% of measurements, good for 26%, and moderate for 6%. Variables presenting wider confidence intervals (> 6o) in the Bland-Altman tests, in intraexaminer assessment, were: mandibular incisor angle, maxillary incisor angle, and occlusal plane angle. And in comparison methods the variables with wider confidence interval were: mandibular incisor, maxillary incisor, GoGn, occlusal plane angle, Frankfort horizontal plane (FHP), and CoA. Superimposition of structures seemed to influence the results more than magnification, and neither one of them significantly influenced the measurements. Considerable individual variability may occur, especially for mandibular and maxillary incisors, FHP and occlusal plane.

Two- versus three-dimensional imaging in subjects with unerupted maxillary canines.

PubMed

Botticelli, Susanna; Verna, Carlalberta; Cattaneo, Paolo M; Heidmann, Jens; Melsen, Birte

2011-08-01

The aim of this study was to evaluate whether there is any difference in the diagnostic information provided by conventional two-dimensional (2D) images or by three-dimensional (3D) cone beam computed tomography (CBCT) in subjects with unerupted maxillary canines. Twenty-seven patients (17 females and 10 males, mean age 11.8 years) undergoing orthodontic treatment with 39 impacted or retained maxillary canines were included. For each canine, two different digital image sets were obtained: (1) A 2D image set including a panoramic radiograph, a lateral cephalogram, and the available periapical radiographs with different projections and (2) A 3D image set obtained with CBCT. Both sets of images were submitted, in a single-blind randomized order, to eight dentists. A questionnaire was used to assess the position of the canine, the presence of root resorption, the difficulty of the case, treatment choice options, and the quality of the images. Data analysis was performed using the McNemar-Bowker test for paired data, Kappa statistics, and paired t-tests. The findings demonstrated a difference in the localization of the impacted canines between the two techniques, which can be explained by factors affecting the conventional 2D radiographs such as distortion, magnification, and superimposition of anatomical structures situated in different planes of space. The increased precision in the localization of the canines and the improved estimation of the space conditions in the arch obtained with CBCT resulted in a difference in diagnosis and treatment planning towards a more clinically orientated approach.

Upper full arch rehabilitation with sinus by-pass with tilted implants via tapered-threaded expanders in low density bone: a clinical trial

PubMed Central

BASSI, M. ANDREASI; ANDRISANI, C.; LICO, S.; ORMANIER, Z.; ARCURI, C.

2016-01-01

SUMMARY Purpose In the present paper the use of tapered-screw bone expanders (TSBEs) is proposed, in combination with the placement of tilted implants, in close proximity to the anterior sinus wall, solving the problem of the reduced height of the alveolar bone in the sub-antral area. The Authors present a case series of full-arch rehabilitations performed with this procedure named: Tilted Implant Expansion Osteotomy (TIEO). Materials and methods 12 patients (5 males and 7 females, average age 58.5 ± 8.1 years) with totally or partially edentulous maxilla were enrolled in this study. For each patient 4 implants were placed, the anterior implants in the area of lateral incisors or canines while, the posterior implants, immediately in front of the maxillary sinus, with an inclined position. Adopting the aforesaid procedure, 48 cylindrical two-piece implants were placed, 24 of which were placed in tilted position, in order to by-pass the maxillary sinus. After a healing period of 6 months, the second stage surgery was performed. The cases were finalized by means of a hybrid metal-acrylic prosthesis. The post finalization follow-up was at 12 months. Results Survival rate was 100% since none fixtures were lost. At the one-year follow up the clinical and radiological appearance of the soft and hard tissues was optimal and no pathological signs were recorded. Conclusion TIEO is a promising surgical procedure for full-arch rehabilitation of maxillary edentulous sites and represents a therapeutic alternative to sinus lift techniques. PMID:28042432

[Biomechanical study of internal midface distraction after different types of maxillary osteotomy in patients with cleft lip and palate].

PubMed

Hou, Min; Shi, Guang-Yu; Pu, Li-Chen; Song, Da-Li; Zhang, Xi-Zhong; Liu, Chun-Ming

2009-09-01

To investigate the biomechanical changes of internal midface distraction after different types of maxillary osteotomy in patients with cleft lip and palate (CLP). 3-D finite element (FEM) analysis was used. 3-D models of Le Fort I, II, III osteotomy and soft tissue were established. Based on the new pattern of internal midface distractor, the distraction of maxillary complex was simulated to advance 10 mm anteriorly. The mechanical change was studied. The maxillary complex in CLP were advanced after distraction. Constriction of alveolar crest and palate occurred in Le Fort I osteotomy, but not in Le Fort II and III osteotomy. The maxillary complex was moved anteriorly en bloc after Le Fort III osteotomy, but some degree of rotation of maxillary complex was observed during the distraction after Le Fort I and II osteotomy. In vertical direction, the maxillary complex had more counterclockwise rotation after Le Fort II osteotomy. 3-D FEM analysis can be used for the study of internal distraction. It can reflect the maxillary movement and provide the theory basis for preoperative design.

Airflow and temperature distribution inside the maxillary sinus: a computational fluid dynamics simulation.

PubMed

Zang, Hongrui; Liu, Yingxi; Han, Demin; Zhang, Luo; Wang, Tong; Sun, Xiuzhen; Li, Lifeng

2012-06-01

The airflow velocity and flux in maxillary sinuses were much lower than those in the nasal cavity, and the temperature in maxillary sinuses was much higher than the temperature in the middle meatus. With the increase of maximum diameter of the ostium, the above indices changed little. The purpose of the paper was to investigate, first, the flow and temperature distribution inside normal maxillary sinus in inspiration, and second, flow and temperature alteration with the increase of maximum ostium diameter. Three-dimensional models with nasal cavities and bilateral maxillary sinuses were constructed for computational fluid dynamics analysis. Virtual surgeries were implemented for the maxillary ostium, the maximum diameters of which were 8, 10, 12, and 15 mm, respectively. The finite volume method was used for numerical simulation. The indices of velocity, pressure, vector, and temperature were processed and compared between models. The airflow velocity in maxillary sinuses (average velocity 0.062 m/s) was much lower than that in the middle meatus (average velocity 3.26 m/s). With the increase of ostium diameter, airflow characteristics distributed in the maxillary sinuses changed little. The normal temperature in the maxillary sinus remained almost constant at 34°C and changed little with the increase of ostium diameter.

Anterior maxillary segmental distraction for correction of maxillary hypoplasia and dental crowding in cleft palate patients: a preliminary report.

PubMed

Wang, X-X; Wang, X; Li, Z-L; Yi, B; Liang, C; Jia, Y-L; Zou, B-S

2009-12-01

To evaluate the feasibility of anterior maxillary segmental distraction (AMSD) to correct maxillary hypoplasia and severe dental crowding in cleft lip and palate (CLP) patients, 7 patients (average age 16.4 years) with maxillary hypoplasia, shortened maxillary dental arch length and severe anterior dental crowding secondary to CLP were selected for this study. After anterior maxillary segmental osteotomy, 3 patients were treated using bilateral internal distraction devices, and 4 patients were treated using rigid external distraction devices. Photographs and radiographs were taken to review the improvement in facial profile and occlusion after distraction. An average 10.25 mm anterior maxillary advancement was obtained in all patients after 10-23 days of distraction and 9-16 weeks of consolidation. The sella-nasion-point A (SNA) angle increased from 69.5 degrees to 79.6 degrees. Midface convexity was greatly improved and velopharyngeal competence was preserved. The maxillary dental arch length was greatly increased by 10.1 mm (P<0.01). Dental crowding and malocclusion were corrected by orthodontic treatment. These results show that AMSD can effectively correct the hypoplastic maxilla and severe dental crowding associated with CLP by increasing the midface convexity and dental arch length while preserving velopharyngeal function, and dental crowding can be corrected without requiring tooth extraction.

Dimensional changes of upper airway after rapid maxillary expansion: a prospective cone-beam computed tomography study.

PubMed

Chang, Yoon; Koenig, Lisa J; Pruszynski, Jessica E; Bradley, Thomas G; Bosio, Jose A; Liu, Dawei

2013-04-01

The aim of this prospective study was to use cone-beam computed tomography to assess the dimensional changes of the upper airway in orthodontic patients with maxillary constriction treated by rapid maxillary expansion. Fourteen orthodontic patients (mean age, 12.9 years; range, 9.7-16 years) were recruited. The patients with posterior crossbite and constricted maxilla were treated with rapid maxillary expansion as the initial part of their comprehensive orthodontic treatments. Before and after rapid maxillary expansion cone-beam computed tomography scans were taken to measure the retropalatal and retroglossal airway changes in terms of volume, and sagittal and cross-sectional areas. The transverse expansions by rapid maxillary expansion were assessed between the midlingual alveolar bone plates at the maxillary first molar and first premolar levels. The measurements of the before and after rapid maxillary expansion scans were compared by using paired t tests with the Bonferroni adjustment for multiple comparisons. After rapid maxillary expansion, significant and equal amounts of 4.8 mm of expansion were observed at the first molar (P = 0.0000) and the first premolar (P = 0.0000) levels. The width increase at the first premolar level (20.0%) was significantly greater than that at the first molar level (15.0%) (P = 0.035). As the primary outcome variable, the cross-sectional airway measured from the posterior nasal spine to basion level was the only parameter showing a significant increase of 99.4 mm(2) (59.6%) after rapid maxillary expansion (P = 0.0004). These results confirm the findings of previous studies of the effect of rapid maxillary expansion on the maxilla. Additionally, we found that only the cross-sectional area of the upper airway at the posterior nasal spine to basion level significantly gains a moderate increase after rapid maxillary expansion. Copyright © 2013 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

[Conseqquences of dorso-ventral and anterior-posterior reversion of early neurula lateral mesoblast on development of urogenital system in common toad, Bufo bufo. (Amphibia anura)].

PubMed

Hakim, J; Gipouloux, J D

1975-10-27

At early neurula stage of the toad, cranio-caudal and dorso-ventral reversal of lateral mesoblast is performed. The genito-urinary system is therefore missing after this intervention. The three following factors of the formation of this system anlage are anlyzed: lateral mesoderm competence, stimulative activites of dorso-caudal endoblast on the one hand, of chordo-mesoderm on the other hand.

[Comparison of treatment outcomes in patients with maxillary dentoalveolar protrusion by applying different anchorage methods: a three-dimensional model study].

PubMed

Ning, Ma; Weiran, Li

2015-02-01

This study aims to compare the treatment outcomes in patients with maxillary dentoalveolar protrusion by applying different anchorage methods via three-dimensional model measurement. A total of 46 patients with maxillary dentoalveolar protrusion treated with bilateral maxillary first premolar extractions and high anchorage were selected. The subjects were randomly divided into three groups according to the type of anchorage applied, which included implant, extraoral, and Nance arch anchorages. The maxillary dental models were made before treatment and after space closure of maxilla. The movements of the maxillary central incisors and first molars were measured via a three-dimensional model measurement, and the amounts of movement were compared among the three groups. The sagittal lingual movements of the maxillary central incisors were (-6.661 ± 1.328), (-5.939 ± 1.806), and (-5.788 ± 2.009) mm for the implant, extraoral, and Nance arch anchorage groups, respectively, with no significant difference among the three groups (P = 0.121). The corresponding vertical movements of the maxillary central incisors were (0.129 ± 1.815) mm intrusion, and (-2.162 ± 2.026), (-2.623 ± 1.776) mm extrusion. Significant difference was found between the implant anchorage group and the other groups (P < 0.05). The corresponding sagittal mesial movements of the maxillary first molars were (0.608 ± 1.045), (1.445 ± 1.462), and (1.503 ± 0.945) mm. The corresponding vertical movements of the maxillary first molars were (0.720 ± 0.805) mm intrusion, (0.076 ± 0.986) mm intrusion, and (-0.072 ± 0.690) mm extrusion. Significant difference was found between the implant anchorage group and the other two groups (P < 0.05). In the transverse direction, the first molars all moved lingually with no significant difference among the three groups (P > 0.05). Implant anchorage may be superior in the vertical control of the maxillary incisors and in the sagittal, as well as in the vertical control of the maxillary molars, compared with the traditional anchorages during the treatment of patients with maxillary dentoalveolar protrusion.

Generation and evaluation of 3D digital casts of maxillary defects based on multisource data registration: A pilot clinical study.

PubMed

Ye, Hongqiang; Ma, Qijun; Hou, Yuezhong; Li, Man; Zhou, Yongsheng

2017-12-01

Digital techniques are not clinically applied for 1-piece maxillary prostheses containing an obturator and removable partial denture retained by the remaining teeth because of the difficulty in obtaining sufficiently accurate 3-dimensional (3D) images. The purpose of this pilot clinical study was to generate 3D digital casts of maxillary defects, including the defective region and the maxillary dentition, based on multisource data registration and to evaluate their effectiveness. Twelve participants with maxillary defects were selected. The maxillofacial region was scanned with spiral computer tomography (CT), and the maxillary arch and palate were scanned using an intraoral optical scanner. The 3D images from the CT and intraoral scanner were registered and merged to form a 3D digital cast of the maxillary defect containing the anatomic structures needed for the maxillary prosthesis. This included the defect cavity, maxillary dentition, and palate. Traditional silicone impressions were also made, and stone casts were poured. The accuracy of the digital cast in comparison with that of the stone cast was evaluated by measuring the distance between 4 anatomic landmarks. Differences and consistencies were assessed using paired Student t tests and the intraclass correlation coefficient (ICC). In 3 participants, physical resin casts were produced by rapid prototyping from digital casts. Based on the resin casts, maxillary prostheses were fabricated by using conventional methods and then evaluated in the participants to assess the clinical applicability of the digital casts. Digital casts of the maxillary defects were generated and contained all the anatomic details needed for the maxillary prosthesis. Comparing the digital and stone casts, a paired Student t test indicated that differences in the linear distances between landmarks were not statistically significant (P>.05). High ICC values (0.977 to 0.998) for the interlandmark distances further indicated the high degree of consistency between the digital and stone casts. The maxillary prostheses showed good clinical effectiveness, indicating that the corresponding digital casts met the requirements for clinical application. Based on multisource data from spiral CT and the intraoral scanner, 3D digital casts of maxillary defects were generated using the registration technique. These casts were consistent with conventional stone casts in terms of accuracy and were suitable for clinical use. Copyright © 2017 The Authors. Published by Elsevier Inc. All rights reserved.

Concomitant intra-articular glenohumeral injuries in displaced fractures of the lateral clavicle.

PubMed

Beirer, Marc; Zyskowski, Michael; Crönlein, Moritz; Pförringer, Dominik; Schmitt-Sody, Marcus; Sandmann, Gunther; Huber-Wagner, Stefan; Biberthaler, Peter; Kirchhoff, Chlodwig

2017-10-01

To detect concomitant intra-articular glenohumeral injuries, in acute displaced fractures of the lateral clavicle, initially missed due to unfeasible clinical evaluation of the acutely injured shoulder. All patients suffering from an acute displaced lateral clavicle fracture with indication to surgical treatment underwent diagnostic shoulder arthroscopy prior to open reduction and internal fixation. In case of therapy-relevant intra-articular glenohumeral injuries, subsequent surgical treatment was performed. Intra-articular injuries were found in 13 of 28 patients (46.4 %) with initially suspected isolated lateral clavicle fracture. Additional surgical treatment was performed in 8 of 28 cases (28.6 %). Superior labral anterior-posterior (SLAP) lesions were observed in 4 of 28 patients (14.3 %; SLAP II a: 1; II b: 1; III: 1; and IV: 1). Lesions of the pulley system were found in 3 of 28 patients (10.7 %; Habermeyer III°). One partial articular supraspinatus tendon avulsion lesion (3.6 %) and one lesion of the subscapularis tendon (3.6 %; Fox and Romeo II°) were observed. Traumatic concomitant glenohumeral injuries in lateral clavicle fractures seem to be more frequent than expected in general. Subsequent surgical treatment of these formerly missed but therapy-relevant injuries may increase functional outcome and reduce complication rate. IV.

Central Projections of Gustatory Receptor Neurons in the Medial and the Lateral Sensilla Styloconica of Helicoverpa armigera Larvae

PubMed Central

Tang, Qing-Bo; Zhan, Huan; Cao, Huan; Berg, Bente G.; Yan, Feng-Ming; Zhao, Xin-Cheng

2014-01-01

Food selection behavior of lepidopteran larvae is predominantly governed by the activation of taste neurons present in two sensilla styloconica located on the galea of the maxilla. In this study, we present the ultrastructure of the sensilla styloconica and the central projection pattern of their associated receptor neurons in larvae of the heliothine moth, Helicoverpa armigera. By means of light microscopy and scanning electron microscopy, the previous findings of two morphologically fairly similar sensilla comprising a socketed conic tip inserted into a large peg were confirmed. However, the peg size of the medial sensillum was found to be significantly bigger than that of the lateral sensillum. The sensory neurons derived from each sensillum styloconicum were mapped separately using anterograde staining experiments combined with confocal laser-scanning microscopy. For determining the afferents’ target regions relative to each other, we reconstructed the labeled axons and placed them into a common reference framework. The sensory axons from both sensilla projected via the ipsilateral maxillary nerve to the suboesophageal ganglion and further through the ipsilateral circumoesophageal connective to the brain. In the suboesophageal ganglion, the sensory projections targeted two areas of the ipsilateral maxillary neuropil, one located in the ventrolateral neuromere and the other adjacent to the neuromere midline. In the brain, the axon terminals targeted the dorso-anterior area of the ipsilateral tritocerebrum. As confirmed by the three-dimensional reconstructions, the target regions of the neural projections originating from each of the two sensilla styloconica were identical. PMID:24740428

Does rapid maxillary expansion have long-term effects on airway dimensions and breathing?

PubMed

Baratieri, Carolina; Alves, Matheus; de Souza, Margareth Maria Gomes; de Souza Araújo, Mônica Tirre; Maia, Lucianne Cople

2011-08-01

In this systematic review, we identified and qualified the evidence of long-term reports on the effects of rapid maxillary expansion (RME) on airway dimensions and functions. Electronic databases (Ovid, Scirus, Scopus, Virtual Health Library, and Cochrane Library) were searched from 1900 to September 2010. Clinical trials that assessed airway changes at least 6 months after RME in growing children with rhinomanometry, acoustic rhinometry, computed tomography, or posteroanterior and lateral radiographs were selected. Studies that used surgically assisted RME and evaluated other simultaneous treatments during expansion, systemically compromised subjects, or cleft patients were excluded. A methodologic-quality scoring process was used to identify which studies would be most valuable. Fifteen articles fulfilled the inclusion criteria, and full texts were assessed. Three were excluded, and 12 were assessed for eligibility. Four articles with low methodologic quality were not considered. The remaining 8 were qualified as moderate. The posteroanterior radiographs showed that nasal cavity width increases; in the lateral radiographs, decreased craniocervical angulation was associated with increases of posterior nasal space. Cone-beam computed tomography did not show significant increases of nasal cavity volume. Rhinomanometry showed reduction of nasal airway resistance and increase of total nasal flow, and acoustic rhinometry detected increases of minimal cross-sectional area and nasal cavity volume. There is moderate evidence that changes after RME in growing children improve the conditions for nasal breathing and the results can be expected to be stable for at least 11 months after therapy. Copyright © 2011 American Association of Orthodontists. Published by Mosby, Inc. All rights reserved.

Maxillary Sinus Augmentation for Dental Implant Rehabilitation of the Edentulous Ridge: A Comprehensive Overview of Systematic Reviews.

PubMed

Ting, Miriam; Rice, Jeremy G; Braid, Stanton M; Lee, Cameron Y S; Suzuki, Jon B

2017-06-01

The objective of this systemic review was to perform a comprehensive overview of systematic reviews and meta-analyses of the maxillary sinus augmentation procedure for implant rehabilitation in humans. The following were evaluated in this overview: (1) anatomic variables affecting sinus augmentation, (2) histomorphometric analysis of the grafted sinus, (3) volumetric changes after sinus grafting, and (4) implant survival beyond 1 year. Electronic databases were searched for systematic reviews and meta-analyses of implant-related sinus augmentation published from 1976 to September 2015. The studies selected must identify itself as a systemic review or meta-analysis in the title or abstract and must pertain to sinus augmentation. Thirty-three publications fulfilled the review criteria. The AMSTAR ratings for the 33 chosen reviews scored greater than 3 of 11, with 8 reviews scoring greater or equal to 8 of 11. The outcome of this overview suggested that the following will increase the success of sinus augmentation and survival of implants placed in the grafted sinus: (1) the use of barrier membranes over the lateral window when using a lateral approach to graft the sinus, (2) the use of particulate autogenous bone with or without other substitute graft materials, (3) sinus augmentation without the use of grafting materials may be considered provided that the space between the sinus membrane and floor can be maintained, (4) the use of rough-surfaced implants, (5) simultaneous implant placement with residual bone height greater than 4 mm, and (6) the cessation of smoking.

Oral health status and reasons for not attending dental care among 12- to 16-year-old children with Down syndrome in special needs centres in Jordan.

PubMed

Al Habashneh, R; Al-Jundi, S; Khader, Y; Nofel, N

2012-11-01

The objective of this study was to assess oral health status, treatment needs, soft and hard tissue findings, as well as reasons for not attending dental care among children with Down syndrome (DS) registered in special needs centres in Jordan. The sample consisted of a total of 206 participants with a mean age of 13.66 ± 1.47 comprising 103 with DS and 103 age- and gender-matched non-DS/public school children. Clinical levels of oral hygiene were assessed using Simplified Oral hygiene index, and caries detection was carried out according to WHO caries recording criteria. Children who had DS had a significantly higher percentage of surfaces with severe gingival index (39.9 ± 9.1 versus 15.9 ± 8.0, P < 0.001) and a higher mean of probing pocket depth than children without DS (2.27 ± 0.2 versus 1.81 ± 0.32, P < 0.000). Significantly more peg-shaped maxillary lateral incisors and retained primary teeth (P < 0.001) were observed in subjects with DS, compared with non-DS children. Average decayed, missing and filled teeth (DMFT) was significantly lower in male children with DS compared with male non-DS children only (P = 0.034). The most common reason cited for not taking children to the dentist for DS group was 'Not aware of the dental problems of their children' and for non-DS groups 'No awareness of the importance of dental visit' (61.2% and 53%, respectively). While having similar caries level, Jordanian teenagers with DS had more dental anomalies, poorer periodontal health and less dental attendance than age- and gender-matched non-DS/public school children. © 2012 John Wiley & Sons A/S.

Rifapentine

MedlinePlus

... risk of getting an infection later that resists antibiotic treatment. ... the medication in a small amount of semisolid food such as pudding or applesauce. ... resistant to antibiotics. If you miss doses of rifapentine, you may ...

Maxillary growth after the use of protraction head gear in conjunction with presurgical orthopedics and gingivoperiosteoplasty for complete bilateral cleft lip and alveolus patients.

PubMed

Kobayashi, Shinji; Hirakawa, Takashi; Fukawa, Toshihiko; Maegawa, Jiro

2013-09-01

Maxillary development is often inadequate in bilateral cleft patients. The use of presurgical orthopedics (PSO) and gingivoperiosteoplasty (GPP) may promote bone formation at the alveolar cleft, but can also have detrimental effects on maxillary development. Our objective was to investigate the effect of PSO and GPP on maxillary development in bilateral cleft lip and alveolus (BCLA) patients. We had 3 complete BCLA patients who had received PSO. All patients underwent cheiloplasty and GPP simultaneously. At 4 years, maxillary protraction head gear was used as part of the protocol. They were evaluated by cephalometric analysis at 4 and 8 years of age, and by CT imaging at 5 years of age. At 4 years of age, patients with all BCLA had anterior crossbite of deciduous central incisors. As a result of maxillary protraction, jaw development at 8 years was good. Among all patients, only one showed bone formation at the alveolar cleft sufficient to avoid alveolar bone grafting (ABG). All patients presented anterior crossbite in the premaxillary region, but had good maxillary growth at 8 years old as a result of maxillary protraction. The combination of PSO and GPP can potentially eliminate the need for ABG and does not significantly retard maxillary development. PSO with GPP and protraction head gear may be an option, but long-term growth is not known.

Infratemporal fossa fat enlargement in chronic maxillary atelectasis.

PubMed

Kohn, Jocelyne C; Rootman, Daniel B; Xu, Dongdong; Goldberg, Robert A

2013-08-01

To describe the radiographic findings in chronic maxillary atelectasis and analyse the volume changes of the affected maxillary sinus, orbit, nasal vault and infratemporal fossa. Case series of all patients with diagnosis of chronic maxillary atelectasis presenting between January 2000 and August 2012 who underwent full oculoplastic and orbital evaluation including standardised photography and CT or MRI. Two-dimensional imaging features and volumetric changes were assessed. Affected and unaffected sides were compared. Demographic data, clinical presentation, Hertel measurements, photographic and radiological findings were analysed. 22 patients (64% men) met the inclusion criteria. Mean relative enophthalmos was 2.1 mm and mean hypoglobus was 1.8 mm. The most common radiographic findings were sinus opacification (91%), uncinate process retraction/middle meatus increase (91%), orbit enlargement (100%), ipsilateral septum deviation (64%) and infratemporal fossa fat enlargement (100%). Infratemporal fossa fat area and volume were significantly larger in the affected side (p<0.01). Additionally, ipsilateral orbit (p<0.01) and nasal vault volume (p<0.01) were similarly increased. Maxillary sinus volume correlated significantly only with infratemporal fossa fat enlargement (p<0.05). There is a significant increase in the infratemporal fossa fat, nasal and orbital volume corresponding to a decrease in maxillary sinus size in chronic maxillary atelectasis. Chronic maxillary atelectasis is associated with redistribution of volume between the maxillary sinus and the surrounding infratemporal fossa, orbit and nasal cavity.

Maxillary sinus volume in patients with impacted canines.

PubMed

Oz, Aslihan Zeynep; Oz, Abdullah Alper; El, Hakan; Palomo, Juan Martin

2017-01-01

To evaluate the maxillary sinus volumes in unilaterally impacted canine patients and to compare the volumetric changes that occur after the eruption of canines to the dental arch using cone beam computed tomography (CBCT). Pre- (T0) and posttreatment (T1) CBCT records of 30 patients were used to calculate maxillary sinus volumes between the impacted and erupted canine sides. The InVivoDental 5.0 program was used to measure the volume of the maxillary sinuses. The distance from impacted canine cusp tip to the target point on the palatal plane was also measured. Right maxillary sinus volume was statistically significantly smaller compared to that of the left maxillary sinus when the canine was impacted on the right side at T0. According to the T1 measurements there was no significant difference between the mean volumes of the impaction side and the contralateral side. The distance from the canine tip to its target point on the palatal plane were 17.17 mm, and the distance from the tip to the target point was 15.14 mm for the left- and right-side impacted canines, respectively, and there was a significant difference between the mean amount of change of both sides of maxillary sinuses after treatment of impacted canines. Orthodontic treatment of impacted canines created a significant increase in maxillary sinus volume when the impacted canines were closer with respect to the maxillary sinus.

Maxillary distraction osteogenesis in cleft lip and palate patients with skeletal anchorage.

PubMed

Minami, Katsuhiro; Mori, Yoshihide; Tae-Geon, Kwon; Shimizu, Hidetaka; Ohtani, Miyuki; Yura, Yoshiaki

2007-03-01

Maxillary distraction osteogenesis with the rigid external distraction (RED) system has been used to treat cleft lip and palate (CLP) patients with severe maxillary hypoplasia. We introduce maxillary distraction osteogenesis for CLP patients with skeletal anchorage adapted on a stereolithographic model. Six maxillary deficiency CLP patients treated according to our CLP treatment protocol had undergone maxillary distraction osteogenesis. In all patients, computed tomography (CT) images were recorded preoperatively, and the data were transferred to a workstation. Three-dimensional skeletal structures were reconstructed with CT data sets, and a stereolithographic model was produced. On the stereolithographic model, miniplates were adapted to the surface of maxilla beside aperture piriforms. The operation performed involved a high Le Fort I osteotomy with pterygomaxillary disjunction. Miniplates were fixed to the maxillary segment with three or four screws and used for anchorage of the RED system. Retraction of the maxillary segment was initiated after 1 week. The accuracy of the stereolithographic models was enough to adapt the miniplates so that there was no need to readjust the plates during surgery. Postoperative cephalometric analysis showed that the direction of the retraction was almost parallel to the palatal plane, and dental compensation did not occur. We performed maxillary distraction osteogenesis with skeletal anchorage adapted on the stereolithographic models. Excellent esthetic outcome and skeletal advancement were achieved without dentoalveolar compensations.

Transpalatal distraction for the management of maxillary constriction in pediatric patients.

PubMed

Adolphs, Nicolai; Ernst, Nicole; Hoffmeister, Bodo; Raguse, Jan-Dirk

2015-01-01

The management of severe maxillary constriction can be challenging. For that purpose surgically assisted maxillary expansion by transpalatal distraction (TPD) can typically be recommended after skeletal maturity. However in selected cases bone borne transpalatal distraction devices can contribute to improve maxillary constriction considerably earlier already during mixed dentition. To assess the possibility of bone borne transpalatal distraction in pediatric patients. Clinical paper. Since 2010 TPD has been applied to six pediatric patients during mixed dentition when severe maxillary constriction was present and conventional orthodontic widening has already failed. Individually selected devices (Surgitec, Belgium) were inserted in general anaesthesia and distraction was performed according to well known parameters. Maxillary constriction could be improved in all six patients without any drawbacks by bone borne devices during mixed dentition. Skeletal conditions were obviously improved for subsequent orthodontic or orthognathic therapy without functional impairment. Follow-up is up to 36 months after device removal. Transpalatal Distraction is recommendable in selected pediatric patients if massive growth disturbance is present or has to be expected. TPD allows for individually adapted maxillary expansion by selection and positioning of appropriate devices in combination with intraoperative testing of maxillary movements and controlled bone removal.

Changes in speech following maxillary distraction osteogenesis.

PubMed

Guyette, T W; Polley, J W; Figueroa, A; Smith, B E

2001-05-01

The purpose of this study was to describe changes in articulation and velopharyngeal function following maxillary distraction osteogenesis. This is a descriptive, post hoc clinical report comparing the performance of patients before and after maxillary distraction. The independent variable was maxillary distraction while the dependent variables were resonance, articulation errors, and velopharyngeal function. The data were collected at a tertiary health care center in Chicago. The data from pre- and postoperative evaluations of 18 maxillary distraction patients were used. The outcome measures were severity of hypernasality and hyponasality, velopharyngeal orifice size as estimated using the pressure-flow technique, and number and type of articulation errors. At the long-term follow-up, 16.7% exhibited a significant increase in hypernasality. Seventy-five percent of patients with preoperative hyponasality experienced improved nasal resonance. Articulation improved in 67% of patients by the 1-year follow-up. In a predominately cleft palate population, the risk for velopharyngeal insufficiency following maxillary distraction is similar to the risk observed in Le Fort I maxillary advancement. Patients being considered for maxillary distraction surgery should receive pre- and postoperative speech evaluations and be counseled about risks for changes in their speech.

Australian lungfish (Neoceratodus forsteri): a missing link in the evolution of complementary side biases for predator avoidance and prey capture.

PubMed

Lippolis, G; Joss, J M P; Rogers, Lesley J

2009-01-01

Side biases in behavior, reflecting lateral specializations of the brain, are widespread amongst vertebrates. We studied laterality in the Australian lungfish (Neoceratodus forsteri) to gain insight into the evolution of the complementary specializations of predator avoidance (right hemisphere) and foraging behavior (left hemisphere). Because N. forsteri is the closest extant ancestor of the first land-dwelling vertebrates, knowledge of laterality in this species should provide a missing link in the transition from fish to tetrapods. Predator escape responses were elicited by generating pressure waves and a significant bias for C-start responses to the left side was found. This bias was unaffected by activity levels that change according to a diurnal cycle: activity is higher in the dark phase than the light phase. A complementary bias to turn to the right side was found during feeding behavior. This pattern of opposite-side specializations matches that known for fish, anurans, reptiles, birds and, as some evidence indicates, also mammals. Hence, we conclude that it is a homologous pattern of lateralization that evolved in early aquatic vertebrates and was retained as they made the transition to land-dwelling tetrapods. Copyright 2009 S. Karger AG, Basel.

Distalization of maxillary arch and correction of Class II with mini-implants: A report of two cases

PubMed Central

Tekale, Pawankumar Dnyandeo; Vakil, Ketan K.; Vakil, Jeegar K.; Gore, Ketan A.

2015-01-01

This article reports the successful use of mini-screws in the maxilla to treat two patients of age 21-year and 17-year-old girls. Both the patients had a skeletal Class II malocclusion with protrusive maxillary teeth and angels Class II mal-occlusion. Temporary anchorage devices (TADs) in the posterior dental region between maxillary second premolar and maxillary first molar teeth on both sides were used as anchorage for the retraction and intrusion of her maxillary anterior teeth. Those appliances, combined with a compensatory curved maxillary archwire, eliminated spacing, deep bite, forwardly placed and proclined upper front teeth and the protrusive profile, corrected the molar relationship from Class II to Class I. With no extra TADs in the anterior region for intrusion, the treatment was workable and simple. The patient received a satisfactory occlusion and an attractive smile. This technique requires minimal compliance and is particularly useful for correcting Class II patients with protrusive maxillary front teeth and dental deep bite. PMID:26097360

Jagged1 is essential for osteoblast development during maxillary ossification

PubMed Central

Hill, Cynthia R.; Yuasa, Masato; Schoenecker, Jonathan; Goudy, Steven L.

2015-01-01

Maxillary hypoplasia occurs due to insufficient maxillary intramembranous ossification, leading to poor dental occlusion, respiratory obstruction and cosmetic deformities. Conditional deletion of Jagged1 (Jag1) in cranial neural crest (CNC) cells using Wnt1-cre; Jagged1f/f (Jag1CKO) led to maxillary hypoplasia characterized by intrinsic differences in bone morphology and density using μCT evaluation. Jag1CKO maxillas had altered collagen deposition, delayed ossification, and reduced expression of early and late determinants of osteoblast development during maxillary ossification. In vitro bone cultures on Jag1CKO mouse embryonic maxillary mesenchymal (MEMM) cells demonstrated decreased mineralization that was also associated with diminished induction of osteoblast determinants. BMP receptor expression was dysregulated in the Jag1CKO MEMM cells suggesting that these cells were unable to respond to BMP-induced differentiation. JAG1-Fc rescued in vitro mineralization and osteoblast gene expression changes. These data suggest that JAG1 signaling in CNC-derived MEMM cells is required for osteoblast development and differentiation during maxillary ossification. PMID:24491691

Sliding mechanics with microscrew implant anchorage.

PubMed

Park, Hyo-Sang; Kwon, Tae-Geon

2004-10-01

Three cases are illustrated. One was treated with maxillary microscrew implants, another with mandibular microscrew implants, and the third with both maxillary and mandibular microscrew implants. With the maxillary microscrew implants, the maxillary anterior teeth were retracted bodily with a slight intrusion and all the premolar extraction space was closed without loss of anchorage. Furthermore, the maxillary posterior teeth showed distal movement. The mandibular microscrew implants controlled the vertical position of the mandibular posterior teeth and played an important role in improving the facial profile. The efficacy of sliding mechanics with microscrew implant anchorage on the treatment of skeletal Class II malocclusion is also discussed.

Management of Cleft Maxillary Hypoplasia with Anterior Maxillary Distraction: Our Experience.

PubMed

Chacko, Tojan; Vinod, Sankar; Mani, Varghese; George, Arun; Sivaprasad, K K

2014-12-01

Maxillary hypoplasia is a common developmental problem in cleft lip and palate deformities. Since 1970s these deformities have traditionally been corrected by means of orthognathic surgery. Management of skeletal deformities in the maxillofacial region has been an important challenge for maxillofacial surgeons and orthodontists. Distraction osteogenesis is a surgical technique that uses body's own repairing mechanisms for optimal reconstruction of the tissues. We present four cases of anterior maxillary distraction osteogenesis with tooth borne distraction device-Hyrax, which were analyzed retrospectively for the efficacy of the tooth borne device-Hyrax and skeletal stability of distracted anterior maxillary segment.

Recurrent keratocystic odontogenic tumor of right maxillary sinus involving the right infraorbital rim.

PubMed

Maruthamuthu, Karthikeyan; Vasupradha, G; Dineshshankar, Janardhanam; Balaji, Abishek Rajaram

2017-01-01

Keratocystic odontogenic tumor (KCOT) is a benign odontogenic tumor with an aggressive behavior and high recurrence rate. The most common site of predilection is the posterior mandible. In contrast, KCOTs occurring in the maxillary region are relatively rare. However, the maxillary involvement poses a greater and increased threat, due to proximity to vital structures such as maxillary sinus, orbital floor, and infratemporal fossa. This report presents such a case of KCOT involving the maxillary sinus eroding the floor of the orbit and provides an account of the factors that need to be considered during management.