The effect of B{sub 2}O{sub 3} flux on growth NLBCO superconductor by solid state reaction and wet-mixing methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

Suharta, W. G., E-mail: wgsuharta@gmail.com; Wendri, N.; Ratini, N.

The synthesis of B{sub 2}O{sub 3} flux substituted NLBCO superconductor NdBa{sub 1.75}La{sub 0.25}Cu{sub 3}O{sub 7-∂} has been done using solid state reaction and wet-mixing methods in order to obtain homogeneous crystals and single phase. From DTA/TGA characteritations showed the synthesis process by wet-mixing requires a lower temperature than the solid state reaction in growing the superconductor NdBa{sub 1.75}La{sub 0.25}Cu{sub 3}O{sub 7-∂}. Therefore, in this research NdBa{sub 1.75}La{sub 0.25}Cu{sub 3}O{sub 7-∂} sample calcinated at 650°C for wet-mixing method and 820°C for solid state reaction methods. The all samples was sintered at 950°C for ten hours. Crystallinity of the sample was confirmedmore » using X-ray techniques and generally obtained sharp peaks that indicates the sample already well crystallized. Search match analyses for diffraction data gave weight fractions of impurity phase of the solid state reaction method higher than wet-mixing method. In this research showed decreasing the price of the lattice parameter about 1% with the addition of B{sub 2}O{sub 3} flux for the both synthesis process and 2% of wet mixing process for all samples. Characterization using scanning electron microscopy (SEM) showed the distribution of crystal zise for wet-mixing method more homogeneous than solid state reaction method, with he grain size of samples is around 150–250 nm. The results of vibrating sample magnetometer (VSM) showed the paramagnetic properties for all samples.« less

Occupational/Career Indecision for Economically Disadvantaged High School Students of High Intellectual Ability: A Mixed-Methods Cognitive Process Model

ERIC Educational Resources Information Center

Jung, Jae Yup; Young, Marie

2017-01-01

A mixed-methods design was employed to identify the cognitive processes that lead to occupational/career indecision for economically disadvantaged adolescents of high intellectual ability. In the first phase, interview data collected from 26 economically disadvantaged intellectually gifted Australian adolescents were analyzed using grounded theory…

Understanding the Effects of Time on Collaborative Learning Processes in Problem Based Learning: A Mixed Methods Study

ERIC Educational Resources Information Center

Hommes, J.; Van den Bossche, P.; de Grave, W.; Bos, G.; Schuwirth, L.; Scherpbier, A.

2014-01-01

Little is known how time influences collaborative learning groups in medical education. Therefore a thorough exploration of the development of learning processes over time was undertaken in an undergraduate PBL curriculum over 18 months. A mixed-methods triangulation design was used. First, the quantitative study measured how various learning…

Development of a Mixed Methods Investigation of Process and Outcomes of Community-Based Participatory Research.

PubMed

Lucero, Julie; Wallerstein, Nina; Duran, Bonnie; Alegria, Margarita; Greene-Moton, Ella; Israel, Barbara; Kastelic, Sarah; Magarati, Maya; Oetzel, John; Pearson, Cynthia; Schulz, Amy; Villegas, Malia; White Hat, Emily R

2018-01-01

This article describes a mixed methods study of community-based participatory research (CBPR) partnership practices and the links between these practices and changes in health status and disparities outcomes. Directed by a CBPR conceptual model and grounded in indigenous-transformative theory, our nation-wide, cross-site study showcases the value of a mixed methods approach for better understanding the complexity of CBPR partnerships across diverse community and research contexts. The article then provides examples of how an iterative, integrated approach to our mixed methods analysis yielded enriched understandings of two key constructs of the model: trust and governance. Implications and lessons learned while using mixed methods to study CBPR are provided.

Results of Propellant Mixing Variable Study Using Precise Pressure-Based Burn Rate Calculations

NASA Technical Reports Server (NTRS)

Stefanski, Philip L.

2014-01-01

A designed experiment was conducted in which three mix processing variables (pre-curative addition mix temperature, pre-curative addition mixing time, and mixer speed) were varied to estimate their effects on within-mix propellant burn rate variability. The chosen discriminator for the experiment was the 2-inch diameter by 4-inch long (2x4) Center-Perforated (CP) ballistic evaluation motor. Motor nozzle throat diameters were sized to produce a common targeted chamber pressure. Initial data analysis did not show a statistically significant effect. Because propellant burn rate must be directly related to chamber pressure, a method was developed that showed statistically significant effects on chamber pressure (either maximum or average) by adjustments to the process settings. Burn rates were calculated from chamber pressures and these were then normalized to a common pressure for comparative purposes. The pressure-based method of burn rate determination showed significant reduction in error when compared to results obtained from the Brooks' modification of the propellant web-bisector burn rate determination method. Analysis of effects using burn rates calculated by the pressure-based method showed a significant correlation of within-mix burn rate dispersion to mixing duration and the quadratic of mixing duration. The findings were confirmed in a series of mixes that examined the effects of mixing time on burn rate variation, which yielded the same results.

CFD simulation of local and global mixing time in an agitated tank

NASA Astrophysics Data System (ADS)

Li, Liangchao; Xu, Bin

2017-01-01

The Issue of mixing efficiency in agitated tanks has drawn serious concern in many industrial processes. The turbulence model is very critical to predicting mixing process in agitated tanks. On the basis of computational fluid dynamics(CFD) software package Fluent 6.2, the mixing characteristics in a tank agitated by dual six-blade-Rushton-turbines(6-DT) are predicted using the detached eddy simulation(DES) method. A sliding mesh(SM) approach is adopted to solve the rotation of the impeller. The simulated flow patterns and liquid velocities in the agitated tank are verified by experimental data in the literature. The simulation results indicate that the DES method can obtain more flow details than Reynolds-averaged Navier-Stokes(RANS) model. Local and global mixing time in the agitated tank is predicted by solving a tracer concentration scalar transport equation. The simulated results show that feeding points have great influence on mixing process and mixing time. Mixing efficiency is the highest for the feeding point at location of midway of the two impellers. Two methods are used to determine global mixing time and get close result. Dimensionless global mixing time remains unchanged with increasing of impeller speed. Parallel, merging and diverging flow pattern form in the agitated tank, respectively, by changing the impeller spacing and clearance of lower impeller from the bottom of the tank. The global mixing time is the shortest for the merging flow, followed by diverging flow, and the longest for parallel flow. The research presents helpful references for design, optimization and scale-up of agitated tanks with multi-impeller.

Method for producing a compressed body of mix-powder for ceramic

NASA Technical Reports Server (NTRS)

Okawa, K.

1983-01-01

Under the invented method, a compressed body of mix powder for ceramic is produced by mixing and stirring several raw powder materials with mixing liquid such as water, and, in the process of sending the resulted viscous material pressurized at 5 kg/cm to 7 kg/cm, using 1.5 to 2 times the pressure to filter and dehydrate, adjusting the water content to 10 to 20%.

21 CFR 660.51 - Processing.

Code of Federal Regulations, 2010 CFR

2010-04-01

...) Processing method. (1) The processing method shall be one that has been shown to yield consistently a... be colored green. (3) Only that material which has been fully processed, thoroughly mixed in a single...

Students' General Knowledge of the Learning Process: A Mixed Methods Study Illustrating Integrated Data Collection and Data Consolidation

ERIC Educational Resources Information Center

van Velzen, Joke H.

2018-01-01

There were two purposes for this mixed methods study: to investigate (a) the realistic meaning of awareness and understanding as the underlying constructs of general knowledge of the learning process and (b) a procedure for data consolidation. The participants were 11th-grade high school and first-year university students. Integrated data…

Reducing Physical Risk Factors in Construction Work Through a Participatory Intervention: Protocol for a Mixed-Methods Process Evaluation.

PubMed

Ajslev, Jeppe; Brandt, Mikkel; Møller, Jeppe Lykke; Skals, Sebastian; Vinstrup, Jonas; Jakobsen, Markus Due; Sundstrup, Emil; Madeleine, Pascal; Andersen, Lars Louis

2016-05-26

Previous research has shown that reducing physical workload among workers in the construction industry is complicated. In order to address this issue, we developed a process evaluation in a formative mixed-methods design, drawing on existing knowledge of the potential barriers for implementation. We present the design of a mixed-methods process evaluation of the organizational, social, and subjective practices that play roles in the intervention study, integrating technical measurements to detect excessive physical exertion measured with electromyography and accelerometers, video documentation of working tasks, and a 3-phased workshop program. The evaluation is designed in an adapted process evaluation framework, addressing recruitment, reach, fidelity, satisfaction, intervention delivery, intervention received, and context of the intervention companies. Observational studies, interviews, and questionnaires among 80 construction workers organized in 20 work gangs, as well as health and safety staff, contribute to the creation of knowledge about these phenomena. At the time of publication, the process of participant recruitment is underway. Intervention studies are challenging to conduct and evaluate in the construction industry, often because of narrow time frames and ever-changing contexts. The mixed-methods design presents opportunities for obtaining detailed knowledge of the practices intra-acting with the intervention, while offering the opportunity to customize parts of the intervention.

Carbon dioxide capture from power or process plant gases

DOEpatents

Bearden, Mark D; Humble, Paul H

2014-06-10

The present invention are methods for removing preselected substances from a mixed flue gas stream characterized by cooling said mixed flue gas by direct contact with a quench liquid to condense at least one preselected substance and form a cooled flue gas without substantial ice formation on a heat exchanger. After cooling additional process methods utilizing a cryogenic approach and physical concentration and separation or pressurization and sorbent capture may be utilized to selectively remove these materials from the mixed flue gas resulting in a clean flue gas.

Development of a Mixed Methods Investigation of Process and Outcomes of Community-Based Participatory Research

PubMed Central

Lucero, Julie; Wallerstein, Nina; Duran, Bonnie; Alegria, Margarita; Greene-Moton, Ella; Israel, Barbara; Kastelic, Sarah; Magarati, Maya; Oetzel, John; Pearson, Cynthia; Schulz, Amy; Villegas, Malia; White Hat, Emily R.

2017-01-01

This article describes a mixed methods study of community-based participatory research (CBPR) partnership practices and the links between these practices and changes in health status and disparities outcomes. Directed by a CBPR conceptual model and grounded in indigenous-transformative theory, our nation-wide, cross-site study showcases the value of a mixed methods approach for better understanding the complexity of CBPR partnerships across diverse community and research contexts. The article then provides examples of how an iterative, integrated approach to our mixed methods analysis yielded enriched understandings of two key constructs of the model: trust and governance. Implications and lessons learned while using mixed methods to study CBPR are provided. PMID:29230152

Soft sensor development for Mooney viscosity prediction in rubber mixing process based on GMMDJITGPR algorithm

NASA Astrophysics Data System (ADS)

Yang, Kai; Chen, Xiangguang; Wang, Li; Jin, Huaiping

2017-01-01

In rubber mixing process, the key parameter (Mooney viscosity), which is used to evaluate the property of the product, can only be obtained with 4-6h delay offline. It is quite helpful for the industry, if the parameter can be estimate on line. Various data driven soft sensors have been used to prediction in the rubber mixing. However, it always not functions well due to the phase and nonlinear property in the process. The purpose of this paper is to develop an efficient soft sensing algorithm to solve the problem. Based on the proposed GMMD local sample selecting criterion, the phase information is extracted in the local modeling. Using the Gaussian local modeling method within Just-in-time (JIT) learning framework, nonlinearity of the process is well handled. Efficiency of the new method is verified by comparing the performance with various mainstream soft sensors, using the samples from real industrial rubber mixing process.

A Three-Dimensional Hydrodynamic Focusing Method for Polyplex Synthesis

PubMed Central

Lu, Mengqian; Ho, Yi-Ping; Grigsby, Christopher L.; Nawaz, Ahmad Ahsan; Leong, Kam W.; Huang, Tony Jun

2014-01-01

Successful intracellular delivery of nucleic acid therapeutics relies on multi-aspect optimization, one of which is formulation. While there has been ample innovation on chemical design of polymeric gene carriers, the same cannot be said for physical processing of polymer-DNA nanocomplexes (polyplexes). Conventional synthesis of polyplexes by bulk mixing depends on the operators’ experience. The poorly controlled bulk-mixing process may also lead to batch-to-batch variation and consequent irreproducibility. Here, we synthesize polyplexes by using a three-dimensional hydrodynamic focusing (3D-HF) technique in a single-layered, planar microfluidic device. Without any additional chemical treatment or post processing, the polyplexes prepared by the 3D-HF method show smaller size, slower aggregation rate, and higher transfection efficiency, while exhibiting reduced cytotoxicity compared to the ones synthesized by conventional bulk mixing. In addition, by introducing external acoustic perturbation, mixing can be further enhanced, leading to even smaller nanocomplexes. The 3D-HF method provides a simple and reproducible process for synthesizing high-quality polyplexes, addressing a critical barrier in the eventual translation of nucleic acid therapeutics. PMID:24341632

The numerical modelling of mixing phenomena of nanofluids in passive micromixers

NASA Astrophysics Data System (ADS)

Milotin, R.; Lelea, D.

2018-01-01

The paper deals with the rapid mixing phenomena in micro-mixing devices with four tangential injections and converging tube, considering nanoparticles and water as the base fluid. Several parameters like Reynolds number (Re = 6 - 284) or fluid temperature are considered in order to optimize the process and obtain fundamental insight in mixing phenomena. The set of partial differential equations is considered based on conservation of momentum and species. Commercial package software Ansys-Fluent is used for solution of differential equations, based on a finite volume method. The results reveal that mixing index and mixing process is strongly dependent both on Reynolds number and heat flux. Moreover there is a certain Reynolds number when flow instabilities are generated that intensify the mixing process due to the tangential injections of the fluids.

The Development of Second Language Critical Thinking in a Virtual Language Learning Environment: A Process-Oriented Mixed-Method Study

ERIC Educational Resources Information Center

Mroz, Aurore

2015-01-01

This article presents a process-oriented mixed-method study, focusing on the emergence of second language (L2) critical thinking (CT) skills in the collaborative discourse produced by a focal group of five college-level students of French working in a virtual language learning environment (the VLLE Cinet Second Life). Levels of CT ability were…

Improved silicon carbide for advanced heat engines. I - Process development for injection molding

NASA Technical Reports Server (NTRS)

Whalen, Thomas J.; Trela, Walter

1989-01-01

Alternate processing methods have been investigated as a means of improving the mechanical properties of injection-molded SiC. Various mixing processes (dry, high-sheer, and fluid) were evaluated along with the morphology and particle size of the starting beta-SiC powder. Statistically-designed experiments were used to determine significant effects and interactions of variables in the mixing, injection molding, and binder removal process steps. Improvements in mechanical strength can be correlated with the reduction in flaw size observed in the injection molded green bodies obtained with improved processing methods.

Introduction to special section of the Journal of Family Psychology, advances in mixed methods in family psychology: integrative and applied solutions for family science.

PubMed

Weisner, Thomas S; Fiese, Barbara H

2011-12-01

Mixed methods in family psychology refer to the systematic integration of qualitative and quantitative techniques to represent family processes and settings. Over the past decade, significant advances have been made in study design, analytic strategies, and technological support (such as software) that allow for the integration of quantitative and qualitative methods and for making appropriate inferences from mixed methods. This special section of the Journal of Family Psychology illustrates how mixed methods may be used to advance knowledge in family science through identifying important cultural differences in family structure, beliefs, and practices, and revealing patterns of family relationships to generate new measurement paradigms and inform clinical practice. Guidance is offered to advance mixed methods research in family psychology through sound principles of peer review.

System and Method for Multi-Wavelength Optical Signal Detection

NASA Technical Reports Server (NTRS)

McGlone, Thomas D. (Inventor)

2017-01-01

The system and method for multi-wavelength optical signal detection enables the detection of optical signal levels significantly below those processed at the discrete circuit level by the use of mixed-signal processing methods implemented with integrated circuit technologies. The present invention is configured to detect and process small signals, which enables the reduction of the optical power required to stimulate detection networks, and lowers the required laser power to make specific measurements. The present invention provides an adaptation of active pixel networks combined with mixed-signal processing methods to provide an integer representation of the received signal as an output. The present invention also provides multi-wavelength laser detection circuits for use in various systems, such as a differential absorption light detection and ranging system.

Centrifugal contactor with liquid mixing and flow control vanes and method of mixing liquids of different phases

DOEpatents

Jubin, Robert T.; Randolph, John D.

1991-01-01

The invention is directed to a centrifugal contactor for solvent extraction systems. The centrifugal contactor is provided with an annular vertically oriented mixing chamber between the rotor housing and the rotor for mixing process liquids such as the aqueous and organic phases of the solvent extraction process used for nuclear fuel reprocessing. A set of stationary helically disposed vanes carried by the housing is in the lower region of the mixing chamber at a location below the process-liquid inlets for the purpose of urging the liquids in an upward direction toward the inlets and enhancing the mixing of the liquids and mass transfer between the liquids. The upper region of the mixing vessel above the inlets for the process liquids is also provided with a set helically disposed vanes carried by the housing for urging the process liquids in a downward direction when the liquid flow rates through the inlets are relatively high and the liquids contact the vane set in the upper region. The use of these opposing vane sets in the mixing zone maintains the liquid in the mixing zone at suitable levels.

[Application of the mixed programming with Labview and Matlab in biomedical signal analysis].

PubMed

Yu, Lu; Zhang, Yongde; Sha, Xianzheng

2011-01-01

This paper introduces the method of mixed programming with Labview and Matlab, and applies this method in a pulse wave pre-processing and feature detecting system. The method has been proved suitable, efficient and accurate, which has provided a new kind of approach for biomedical signal analysis.

Diffusely reflecting paints including polytetrafluoroethylene and method of manufacture

NASA Technical Reports Server (NTRS)

Schutt, J. B.; Shai, M. C. (Inventor)

1985-01-01

The invention pertains to a high diffuse, reflective paint comprising an alcohol soluble binder, polytetrafluoroethylene (TFE) and an alcohol for coating a substrate and forming an optical reference with a superior Lambertian characteristic. A method for making the paint by first mixing the biner and alcohol, and thereafter by mixing in outgassed TFE is described. A wetting agent may be employed to aid the mixing process.

Microencapsulation and Electrostatic Processing Method

NASA Technical Reports Server (NTRS)

Morrison, Dennis R. (Inventor); Mosier, Benjamin (Inventor)

2000-01-01

Methods are provided for forming spherical multilamellar microcapsules having alternating hydrophilic and hydrophobic liquid layers, surrounded by flexible, semi-permeable hydrophobic or hydrophilic outer membranes which can be tailored specifically to control the diffusion rate. The methods of the invention rely on low shear mixing and liquid-liquid diffusion process and are particularly well suited for forming microcapsules containing both hydrophilic and hydrophobic drugs. These methods can be carried out in the absence of gravity and do not rely on density-driven phase separation, mechanical mixing or solvent evaporation phases. The methods include the process of forming, washing and filtering microcapsules. In addition, the methods contemplate coating microcapsules with ancillary coatings using an electrostatic field and free fluid electrophoresis of the microcapsules. The microcapsules produced by such methods are particularly useful in the delivery of pharmaceutical compositions.

Breaking from binaries - using a sequential mixed methods design.

PubMed

Larkin, Patricia Mary; Begley, Cecily Marion; Devane, Declan

2014-03-01

To outline the traditional worldviews of healthcare research and discuss the benefits and challenges of using mixed methods approaches in contributing to the development of nursing and midwifery knowledge. There has been much debate about the contribution of mixed methods research to nursing and midwifery knowledge in recent years. A sequential exploratory design is used as an exemplar of a mixed methods approach. The study discussed used a combination of focus-group interviews and a quantitative instrument to obtain a fuller understanding of women's experiences of childbirth. In the mixed methods study example, qualitative data were analysed using thematic analysis and quantitative data using regression analysis. Polarised debates about the veracity, philosophical integrity and motivation for conducting mixed methods research have largely abated. A mixed methods approach can contribute to a deeper, more contextual understanding of a variety of subjects and experiences; as a result, it furthers knowledge that can be used in clinical practice. The purpose of the research study should be the main instigator when choosing from an array of mixed methods research designs. Mixed methods research offers a variety of models that can augment investigative capabilities and provide richer data than can a discrete method alone. This paper offers an example of an exploratory, sequential approach to investigating women's childbirth experiences. A clear framework for the conduct and integration of the different phases of the mixed methods research process is provided. This approach can be used by practitioners and policy makers to improve practice.

Process and material that encapsulates solid hazardous waste

DOEpatents

O'Brien, Michael H.; Erickson, Arnold W.

1999-01-01

A method of encapsulating mixed waste in which a thermoplastic polymer having a melting temperature less than about 150.degree. C. and sulfur and mixed waste are mixed at an elevated temperature not greater than about 200.degree. C. and mixed for a time sufficient to intimately mix the constituents, and then cooled to a solid. The resulting solid is also disclosed.

Using Q Methodology in the Literature Review Process: A Mixed Research Approach

ERIC Educational Resources Information Center

Onwuegbuzie, Anthony J.; Frels, Rebecca K.

2015-01-01

Because of the mixed research-based nature of literature reviews, it is surprising, then, that insufficient information has been provided as to how reviewers can incorporate mixed research approaches into their literature reviews. Thus, in this article, we provide a mixed methods research approach--Q methodology--for analyzing information…

Mixed methods for implementation research: application to evidence-based practice implementation and staff turnover in community-based organizations providing child welfare services.

PubMed

Aarons, Gregory A; Fettes, Danielle L; Sommerfeld, David H; Palinkas, Lawrence A

2012-02-01

Many public sector service systems and provider organizations are in some phase of learning about or implementing evidence-based interventions. Child welfare service systems represent a context where implementation spans system, management, and organizational concerns. Research utilizing mixed methods that combine qualitative and quantitative design, data collection, and analytic approaches are particularly well suited to understanding both the process and outcomes of dissemination and implementation efforts in child welfare systems. This article describes the process of using mixed methods in implementation research and provides an applied example of an examination of factors impacting staff retention during an evidence-based intervention implementation in a statewide child welfare system. The authors integrate qualitative data with previously published quantitative analyses of job autonomy and staff turnover during this statewide implementation project in order to illustrate the utility of mixed method approaches in providing a more comprehensive understanding of opportunities and challenges in implementation research.

Mixed Methods for Implementation Research: Application to Evidence-Based Practice Implementation and Staff Turnover in Community Based Organizations Providing Child Welfare Services

PubMed Central

Aarons, Gregory A.; Fettes, Danielle L.; Sommerfeld, David H.; Palinkas, Lawrence

2013-01-01

Many public sector services systems and provider organizations are in some phase of learning about or implementing evidence-based interventions. Child welfare service systems represent a context where implementation spans system, management, and organizational concerns. Research utilizing mixed methods that combine qualitative and quantitative design, data collection, and analytic approaches are particularly well-suited to understanding both the process and outcomes of dissemination and implementation efforts in child welfare systems. This paper describes the process of using mixed methods in implementation research and provides an applied example of an examination of factors impacting staff retention during an evidence-based intervention implementation in a statewide child welfare system. We integrate qualitative data with previously published quantitative analyses of job autonomy and staff turnover during this statewide implementation project in order to illustrate the utility of mixed method approaches in providing a more comprehensive understanding of opportunities and challenges in implementation research. PMID:22146861

Method for continuous synthesis of metal oxide powders

DOEpatents

Berry, David A.; Haynes, Daniel J.; Shekhawat, Dushyant; Smith, Mark W.

2015-09-08

A method for the rapid and continuous production of crystalline mixed-metal oxides from a precursor solution comprised of a polymerizing agent, chelated metal ions, and a solvent. The method discharges solution droplets of less than 500 .mu.m diameter using an atomizing or spray-type process into a reactor having multiple temperature zones. Rapid evaporation occurs in a first zone, followed by mixed-metal organic foam formation in a second zone, followed by amorphous and partially crystalline oxide precursor formation in a third zone, followed by formation of the substantially crystalline mixed-metal oxide in a fourth zone. The method operates in a continuous rather than batch manner and the use of small droplets as the starting material for the temperature-based process allows relatively high temperature processing. In a particular embodiment, the first zone operates at 100-300.degree. C., the second zone operates at 300-700.degree. C., and the third operates at 700-1000.degree. C., and fourth zone operates at at least 700.degree. C. The resulting crystalline mixed-metal oxides display a high degree of crystallinity and sphericity with typical diameters on the order of 50 .mu.m or less.

Modeling the Bergeron-Findeisen Process Using PDF Methods With an Explicit Representation of Mixing

NASA Astrophysics Data System (ADS)

Jeffery, C.; Reisner, J.

2005-12-01

Currently, the accurate prediction of cloud droplet and ice crystal number concentration in cloud resolving, numerical weather prediction and climate models is a formidable challenge. The Bergeron-Findeisen process in which ice crystals grow by vapor deposition at the expense of super-cooled droplets is expected to be inhomogeneous in nature--some droplets will evaporate completely in centimeter-scale filaments of sub-saturated air during turbulent mixing while others remain unchanged [Baker et al., QJRMS, 1980]--and is unresolved at even cloud-resolving scales. Despite the large body of observational evidence in support of the inhomogeneous mixing process affecting cloud droplet number [most recently, Brenguier et al., JAS, 2000], it is poorly understood and has yet to be parameterized and incorporated into a numerical model. In this talk, we investigate the Bergeron-Findeisen process using a new approach based on simulations of the probability density function (PDF) of relative humidity during turbulent mixing. PDF methods offer a key advantage over Eulerian (spatial) models of cloud mixing and evaporation: the low probability (cm-scale) filaments of entrained air are explicitly resolved (in probability space) during the mixing event even though their spatial shape, size and location remain unknown. Our PDF approach reveals the following features of the inhomogeneous mixing process during the isobaric turbulent mixing of two parcels containing super-cooled water and ice, respectively: (1) The scavenging of super-cooled droplets is inhomogeneous in nature; some droplets evaporate completely at early times while others remain unchanged. (2) The degree of total droplet evaporation during the initial mixing period depends linearly on the mixing fractions of the two parcels and logarithmically on Damköhler number (Da)---the ratio of turbulent to evaporative time-scales. (3) Our simulations predict that the PDF of Lagrangian (time-integrated) subsaturation (S) goes as S-1 at high Da. This behavior results from a Gaussian mixing closure and requires observational validation.

Method of Determining the Filtration Properties of oil-Bearing Crops in the Process of Their Pressing by the Example of Rape-oil Extrusion

NASA Astrophysics Data System (ADS)

Slavnov, E. V.; Petrov, I. A.

2014-07-01

A method of determining the change in the fi ltration properties of oil-bearing crops in the process of their pressing by repeated dynamic loading is proposed. The use of this method is demonstrated by the example of rape-oil extrusion. It was established that the change in the mass concentration of the oil in a rape mix from 0.45 to 0.23 leads to a decrease in the permeability of the mix by 101.5-102 times depending on the pressure applied to it. It is shown that the dependence of the permeability of this mix on the pressure applied to it is nonmonotone in character.

The MIXED framework: A novel approach to evaluating mixed-methods rigor.

PubMed

Eckhardt, Ann L; DeVon, Holli A

2017-10-01

Evaluation of rigor in mixed-methods (MM) research is a persistent challenge due to the combination of inconsistent philosophical paradigms, the use of multiple research methods which require different skill sets, and the need to combine research at different points in the research process. Researchers have proposed a variety of ways to thoroughly evaluate MM research, but each method fails to provide a framework that is useful for the consumer of research. In contrast, the MIXED framework is meant to bridge the gap between an academic exercise and practical assessment of a published work. The MIXED framework (methods, inference, expertise, evaluation, and design) borrows from previously published frameworks to create a useful tool for the evaluation of a published study. The MIXED framework uses an experimental eight-item scale that allows for comprehensive integrated assessment of MM rigor in published manuscripts. Mixed methods are becoming increasingly prevalent in nursing and healthcare research requiring researchers and consumers to address issues unique to MM such as evaluation of rigor. © 2017 John Wiley & Sons Ltd.

Laminated microchannel devices, mixing units and method of making same

DOEpatents

Bennett, Wendy D [Kennewick, WA; Hammerstrom, Donald J [West Richland, WA; Martin, Peter M [Kennewick, WA; Matson, Dean W [Kennewick, WA

2002-10-17

A laminated microchannel device is described in which there is a unit operation process layer that has longitudinal channel. The longitudinal channel is cut completely through the layer in which the unit process operation resides. Both the device structure and method of making the device provide significant advantages in terms of simplicity and efficiency. A static mixing unit that can be incorporated in the laminated microchannel device is also described.

Technical Efficiency and Organ Transplant Performance: A Mixed-Method Approach

PubMed Central

de-Pablos-Heredero, Carmen; Fernández-Renedo, Carlos; Medina-Merodio, Jose-Amelio

2015-01-01

Mixed methods research is interesting to understand complex processes. Organ transplants are complex processes in need of improved final performance in times of budgetary restrictions. As the main objective a mixed method approach is used in this article to quantify the technical efficiency and the excellence achieved in organ transplant systems and to prove the influence of organizational structures and internal processes in the observed technical efficiency. The results show that it is possible to implement mechanisms for the measurement of the different components by making use of quantitative and qualitative methodologies. The analysis show a positive relationship between the levels related to the Baldrige indicators and the observed technical efficiency in the donation and transplant units of the 11 analyzed hospitals. Therefore it is possible to conclude that high levels in the Baldrige indexes are a necessary condition to reach an increased level of the service offered. PMID:25950653

Detection of malondialdehyde in processed meat products without interference from the ingredients.

PubMed

Jung, Samooel; Nam, Ki Chang; Jo, Cheorun

2016-10-15

Our aim was to develop a method for accurate quantification of malondialdehyde (MDA) in meat products. MDA content of uncured ground pork (Control); ground pork cured with sodium nitrite (Nitrite); and ground pork cured with sodium nitrite, sodium chloride, sodium pyrophosphate, maltodextrin, and a sausage seasoning (Mix) was measured by the 2-thiobarbituric acid (TBA) assay with MDA extraction by trichloroacetic acid (method A) and two high-performance liquid chromatography (HPLC) methods: i) HPLC separation of the MDA-dinitrophenyl hydrazine adduct (method B) and ii) HPLC separation of MDA (method C) after MDA extraction with acetonitrile. Methods A and B could not quantify MDA accurately in groups Nitrite and Mix. Nevertheless, MDA in groups Control, Nitrite, and Mix was accurately quantified by method C with good recovery. Therefore, direct MDA quantification by HPLC after MDA extraction with acetonitrile (method C) is useful for accurate measurement of MDA content in processed meat products. Copyright © 2016 Elsevier Ltd. All rights reserved.

Adolescent (Mis)Perceptions about Nicotine Addiction: Results from a Mixed-Methods Study

ERIC Educational Resources Information Center

Roditis, Maria; Lee, Joann; Halpern-Felsher, Bonnie L.

2016-01-01

Purpose: Despite evidence that adolescents become addicted to nicotine even after limited use, adolescents believe they can experiment with or smoke cigarettes for a few years and easily quit. The goal of this study was to examine adolescents' understanding of the definition and process of nicotine addiction using a mixed-methods approach. Method:…

Including mixed methods research in systematic reviews: examples from qualitative syntheses in TB and malaria control.

PubMed

Atkins, Salla; Launiala, Annika; Kagaha, Alexander; Smith, Helen

2012-04-30

Health policy makers now have access to a greater number and variety of systematic reviews to inform different stages in the policy making process, including reviews of qualitative research. The inclusion of mixed methods studies in systematic reviews is increasing, but these studies pose particular challenges to methods of review. This article examines the quality of the reporting of mixed methods and qualitative-only studies. We used two completed systematic reviews to generate a sample of qualitative studies and mixed method studies in order to make an assessment of how the quality of reporting and rigor of qualitative-only studies compares with that of mixed-methods studies. Overall, the reporting of qualitative studies in our sample was consistently better when compared with the reporting of mixed methods studies. We found that mixed methods studies are less likely to provide a description of the research conduct or qualitative data analysis procedures and less likely to be judged credible or provide rich data and thick description compared with standalone qualitative studies. Our time-related analysis shows that for both types of study, papers published since 2003 are more likely to report on the study context, describe analysis procedures, and be judged credible and provide rich data. However, the reporting of other aspects of research conduct (i.e. descriptions of the research question, the sampling strategy, and data collection methods) in mixed methods studies does not appear to have improved over time. Mixed methods research makes an important contribution to health research in general, and could make a more substantial contribution to systematic reviews. Through our careful analysis of the quality of reporting of mixed methods and qualitative-only research, we have identified areas that deserve more attention in the conduct and reporting of mixed methods research.

27 CFR 19.456 - Adding denaturants.

Code of Federal Regulations, 2010 CFR

2010-04-01

... methods of mixing denaturants and spirits if he deems such denaturation will not hinder effective... Denaturation § 19.456 Adding denaturants. Denaturants and spirits shall be mixed in packages, tanks, or bulk... proprietor shall submit a flow diagram of the intended process or method of adding denaturants. (Sec. 201...

Investigating Learning with an Interactive Tutorial: A Mixed-Methods Strategy

ERIC Educational Resources Information Center

de Villiers, M. R.; Becker, Daphne

2017-01-01

From the perspective of parallel mixed-methods research, this paper describes interactivity research that employed usability-testing technology to analyse cognitive learning processes; personal learning styles and times; and errors-and-recovery of learners using an interactive e-learning tutorial called "Relations." "Relations"…

Bridging the qualitative-quantitative divide: Experiences from conducting a mixed methods evaluation in the RUCAS programme.

PubMed

Makrakis, Vassilios; Kostoulas-Makrakis, Nelly

2016-02-01

Quantitative and qualitative approaches to planning and evaluation in education for sustainable development have often been treated by practitioners from a single research paradigm. This paper discusses the utility of mixed method evaluation designs which integrate qualitative and quantitative data through a sequential transformative process. Sequential mixed method data collection strategies involve collecting data in an iterative process whereby data collected in one phase contribute to data collected in the next. This is done through examples from a programme addressing the 'Reorientation of University Curricula to Address Sustainability (RUCAS): A European Commission Tempus-funded Programme'. It is argued that the two approaches are complementary and that there are significant gains from combining both. Using methods from both research paradigms does not, however, mean that the inherent differences among epistemologies and methodologies should be neglected. Based on this experience, it is recommended that using a sequential transformative mixed method evaluation can produce more robust results than could be accomplished using a single approach in programme planning and evaluation focussed on education for sustainable development. Copyright © 2015 Elsevier Ltd. All rights reserved.

Reconciling incongruous qualitative and quantitative findings in mixed methods research: exemplars from research with drug using populations.

PubMed

Wagner, Karla D; Davidson, Peter J; Pollini, Robin A; Strathdee, Steffanie A; Washburn, Rachel; Palinkas, Lawrence A

2012-01-01

Mixed methods research is increasingly being promoted in the health sciences as a way to gain more comprehensive understandings of how social processes and individual behaviours shape human health. Mixed methods research most commonly combines qualitative and quantitative data collection and analysis strategies. Often, integrating findings from multiple methods is assumed to confirm or validate the findings from one method with the findings from another, seeking convergence or agreement between methods. Cases in which findings from different methods are congruous are generally thought of as ideal, whilst conflicting findings may, at first glance, appear problematic. However, the latter situation provides the opportunity for a process through which apparently discordant results are reconciled, potentially leading to new emergent understandings of complex social phenomena. This paper presents three case studies drawn from the authors' research on HIV risk amongst injection drug users in which mixed methods studies yielded apparently discrepant results. We use these case studies (involving injection drug users [IDUs] using a Needle/Syringe Exchange Program in Los Angeles, CA, USA; IDUs seeking to purchase needle/syringes at pharmacies in Tijuana, Mexico; and young street-based IDUs in San Francisco, CA, USA) to identify challenges associated with integrating findings from mixed methods projects, summarize lessons learned, and make recommendations for how to more successfully anticipate and manage the integration of findings. Despite the challenges inherent in reconciling apparently conflicting findings from qualitative and quantitative approaches, in keeping with others who have argued in favour of integrating mixed methods findings, we contend that such an undertaking has the potential to yield benefits that emerge only through the struggle to reconcile discrepant results and may provide a sum that is greater than the individual qualitative and quantitative parts. Copyright © 2011 Elsevier B.V. All rights reserved.

Reconciling incongruous qualitative and quantitative findings in mixed methods research: exemplars from research with drug using populations

PubMed Central

Wagner, Karla D.; Davidson, Peter J.; Pollini, Robin A.; Strathdee, Steffanie A.; Washburn, Rachel; Palinkas, Lawrence A.

2011-01-01

Mixed methods research is increasingly being promoted in the health sciences as a way to gain more comprehensive understandings of how social processes and individual behaviours shape human health. Mixed methods research most commonly combines qualitative and quantitative data collection and analysis strategies. Often, integrating findings from multiple methods is assumed to confirm or validate the findings from one method with the findings from another, seeking convergence or agreement between methods. Cases in which findings from different methods are congruous are generally thought of as ideal, while conflicting findings may, at first glance, appear problematic. However, the latter situation provides the opportunity for a process through which apparently discordant results are reconciled, potentially leading to new emergent understandings of complex social phenomena. This paper presents three case studies drawn from the authors’ research on HIV risk among injection drug users in which mixed methods studies yielded apparently discrepant results. We use these case studies (involving injection drug users [IDUs] using a needle/syringe exchange program in Los Angeles, California, USA; IDUs seeking to purchase needle/syringes at pharmacies in Tijuana, Mexico; and young street-based IDUs in San Francisco, CA, USA) to identify challenges associated with integrating findings from mixed methods projects, summarize lessons learned, and make recommendations for how to more successfully anticipate and manage the integration of findings. Despite the challenges inherent in reconciling apparently conflicting findings from qualitative and quantitative approaches, in keeping with others who have argued in favour of integrating mixed methods findings, we contend that such an undertaking has the potential to yield benefits that emerge only through the struggle to reconcile discrepant results and may provide a sum that is greater than the individual qualitative and quantitative parts. PMID:21680168

Reproducing the old masters: applying colour mixing and painting methodologies to inkjet printing

NASA Astrophysics Data System (ADS)

Olen, Melissa; Padfield, Joseph; Parraman, Carinna

2014-01-01

This research investigates multi-channel inkjet printing methods, which deviate from standard colour management workflows by reflecting on art historical processes, including the construction of colour in old master works, to reproduce specific colour pigment mixes in print. This is approached by incorporating artist colour mixing principles relevant to traditional art making processes through direct n-channel printing and the implementation of multiple pass printing. By demanding specific ink colourants to be employed in print, as well as the application of mixing colour though layering, we can mimic the effects of the traditional processes. These printing methods also generate colour through a variety of colour mixtures that may not have been employed or achieved by the printer driver. The objective of this research is to explore colour mixing and layering techniques in the printing of inkjet reproductions of original artworks that will maintain subtle colour transitions in dark shadow regions. While these colours are lost in traditional inkjet reproduction, by using direct n-channel editing capabilities to reproduce a painted original with high dynamic range we can improve colour variation in the shadow regions.

Child Geopolitical Agency: A Mixed Methods Case Study

ERIC Educational Resources Information Center

Habashi, Janette; Worley, Jody

2009-01-01

This study examines the geopolitical agency of Palestinian children. Mixed methodology was used to identify the etiologies contributing to processes of political socialization. Both qualitative and qualitative methods are equally distributed throughout this research. Focus groups and interviews with 12 Palestinian children, aged 10 to 13 years,…

Hybrid Learning in Enhancing Communicative Skill in English

ERIC Educational Resources Information Center

Singaravelu, G.

2010-01-01

The present study highlights the effectiveness of Hybrid-Learning in enhancing communicative skill in English among the Trainees of Bachelor of education of School of Distance Education, Bharathiar University,Coimbatore. Hybrid learning refers to mixing of different learning methods or mixing two more methods for teaching learning process. It…

Mixed methods analysis of urban environmental stewardship networks

Treesearch

James J.T. Connolly; Erika S. Svendsen; Dana R. Fisher; Lindsay K. Campbell

2015-01-01

While mixed methods approaches to research have been accepted practice within the social sciences for several decades (Tashakkori and Teddlie 2003), the rising demand for cross-disciplinary analyses of socio-environmental processes has necessitated a renewed examination of this approach within environmental studies. Urban environmental stewardship is one area where it...

Do Different Training Conditions Facilitate Team Implementation? A Quasi-Experimental Mixed Methods Study

ERIC Educational Resources Information Center

Nielsen, Karina; Randall, Raymond; Christensen, Karl B.

2017-01-01

A mixed methods approach was applied to examine the effects of a naturally occurring teamwork intervention supported with training. The first objective was to integrate qualitative process evaluation and quantitative effect evaluation to examine "how" and "why" the training influence intervention outcomes. The intervention (N =…

How to Construct a Mixed Methods Research Design.

PubMed

Schoonenboom, Judith; Johnson, R Burke

2017-01-01

This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent design, and design complexity. There also are multiple secondary dimensions that need to be considered during the design process. We explain ten secondary dimensions of design to be considered for each research study. We also provide two case studies showing how the mixed designs were constructed.

Diagnostic tools for mixing models of stream water chemistry

USGS Publications Warehouse

Hooper, Richard P.

2003-01-01

Mixing models provide a useful null hypothesis against which to evaluate processes controlling stream water chemical data. Because conservative mixing of end‐members with constant concentration is a linear process, a number of simple mathematical and multivariate statistical methods can be applied to this problem. Although mixing models have been most typically used in the context of mixing soil and groundwater end‐members, an extension of the mathematics of mixing models is presented that assesses the “fit” of a multivariate data set to a lower dimensional mixing subspace without the need for explicitly identified end‐members. Diagnostic tools are developed to determine the approximate rank of the data set and to assess lack of fit of the data. This permits identification of processes that violate the assumptions of the mixing model and can suggest the dominant processes controlling stream water chemical variation. These same diagnostic tools can be used to assess the fit of the chemistry of one site into the mixing subspace of a different site, thereby permitting an assessment of the consistency of controlling end‐members across sites. This technique is applied to a number of sites at the Panola Mountain Research Watershed located near Atlanta, Georgia.

Mixed-methods designs in mental health services research: a review.

PubMed

Palinkas, Lawrence A; Horwitz, Sarah M; Chamberlain, Patricia; Hurlburt, Michael S; Landsverk, John

2011-03-01

Despite increased calls for use of mixed-methods designs in mental health services research, how and why such methods are being used and whether there are any consistent patterns that might indicate a consensus about how such methods can and should be used are unclear. Use of mixed methods was examined in 50 peer-reviewed journal articles found by searching PubMed Central and 60 National Institutes of Health (NIH)-funded projects found by searching the CRISP database over five years (2005-2009). Studies were coded for aims and the rationale, structure, function, and process for using mixed methods. A notable increase was observed in articles published and grants funded over the study period. However, most did not provide an explicit rationale for using mixed methods, and 74% gave priority to use of quantitative methods. Mixed methods were used to accomplish five distinct types of study aims (assess needs for services, examine existing services, develop new or adapt existing services, evaluate services in randomized controlled trials, and examine service implementation), with three categories of rationale, seven structural arrangements based on timing and weighting of methods, five functions of mixed methods, and three ways of linking quantitative and qualitative data. Each study aim was associated with a specific pattern of use of mixed methods, and four common patterns were identified. These studies offer guidance for continued progress in integrating qualitative and quantitative methods in mental health services research consistent with efforts by NIH and other funding agencies to promote their use.

Concrete Mixing Methods and Concrete Mixers: State of the Art

PubMed Central

Ferraris, Chiara F.

2001-01-01

As for all materials, the performance of concrete is determined by its microstructure. Its microstructure is determined by its composition, its curing conditions, and also by the mixing method and mixer conditions used to process the concrete. This paper gives an overview of the various types of mixing methods and concrete mixers commercially available used by the concrete industry. There are two main types of mixers used: batch mixers and continuous mixers. Batch mixers are the most common. To determine the mixing method best suited for a specific application, factors to be considered include: location of the construction site (distance from the batching plant), the amount of concrete needed, the construction schedule (volume of concrete needed per hour), and the cost. Ultimately, the quality of the concrete produced determines its performance after placement. An important measure of the quality is the homogeneity of the material after mixing. This paper will review mixing methods in regards to the quality of the concrete produced. Some procedures used to determine the effectiveness of the mixing will be examined. PMID:27500029

Influence of the preparation method on the physicochemical properties of indomethacin and methyl-β-cyclodextrin complexes.

PubMed

Rudrangi, Shashi Ravi Suman; Bhomia, Ruchir; Trivedi, Vivek; Vine, George J; Mitchell, John C; Alexander, Bruce David; Wicks, Stephen Richard

2015-02-20

The main objective of this study was to investigate different manufacturing processes claimed to promote inclusion complexation between indomethacin and cyclodextrins in order to enhance the apparent solubility and dissolution properties of indomethacin. Especially, the effectiveness of supercritical carbon dioxide processing for preparing solid drug-cyclodextrin inclusion complexes was investigated and compared to other preparation methods. The complexes were prepared by physical mixing, co-evaporation, freeze drying from aqueous solution, spray drying and supercritical carbon dioxide processing methods. The prepared complexes were then evaluated by scanning electron microscopy, differential scanning calorimetry, X-ray powder diffraction, solubility and dissolution studies. The method of preparation of the inclusion complexes was shown to influence the physicochemical properties of the formed complexes. Indomethacin exists in a highly crystalline solid form. Physical mixing of indomethacin and methyl-β-cyclodextrin appeared not to reduce the degree of crystallinity of the drug. The co-evaporated and freeze dried complexes had a lower degree of crystallinity than the physical mix; however the lowest degree of crystallinity was achieved in complexes prepared by spray drying and supercritical carbon dioxide processing methods. All systems based on methyl-β-cyclodextrin exhibited better dissolution properties than the drug alone. The greatest improvement in drug dissolution properties was obtained from complexes prepared using supercritical carbon dioxide processing, thereafter by spray drying, freeze drying, co-evaporation and finally by physical mixing. Supercritical carbon dioxide processing is well known as an energy efficient alternative to other pharmaceutical processes and may have application for the preparation of solid-state drug-cyclodextrin inclusion complexes. It is an effective and economic method that allows the formation of solid complexes with a high yield, without the use of organic solvents and problems associated with their residues. Copyright © 2015 Elsevier B.V. All rights reserved.

Two stage hydrolysis of corn stover at high solids content for mixing power saving and scale-up applications.

PubMed

Liu, Ke; Zhang, Jian; Bao, Jie

2015-11-01

A two stage hydrolysis of corn stover was designed to solve the difficulties between sufficient mixing at high solids content and high power input encountered in large scale bioreactors. The process starts with the quick liquefaction to convert solid cellulose to liquid slurry with strong mixing in small reactors, then followed the comprehensive hydrolysis to complete saccharification into fermentable sugars in large reactors without agitation apparatus. 60% of the mixing energy consumption was saved by removing the mixing apparatus in large scale vessels. Scale-up ratio was small for the first step hydrolysis reactors because of the reduced reactor volume. For large saccharification reactors in the second step, the scale-up was easy because of no mixing mechanism was involved. This two stage hydrolysis is applicable for either simple hydrolysis or combined fermentation processes. The method provided a practical process option for industrial scale biorefinery processing of lignocellulose biomass. Copyright © 2015 Elsevier Ltd. All rights reserved.

Production of al-si alloy feedstocks using the solvent hot mixing method

NASA Astrophysics Data System (ADS)

Ni, J. Q.; Han, K. Q.; Yu, M. H.

2018-05-01

Powder injection molding is a promising low-cost technique for net shape processing of metal and ceramic components. This study aimed to investigate a new method for preparing aluminium (Al) – silicon (Si) alloy feedstock using the solvent hot mixing process. For this purpose, micron-sized Al-Si (20 wt. %) alloy powder was mixed with a binder consisting of 55 wt. % carnauba wax, 45 wt. % high-density polyethylene, and 3 wt. % stearic acid in a hot xylene bath. The scanning electron microscopy technique, thermogravimetric analysis, density measurement and torque measurements were used to verify the homogeneity of the feedstock. Moreover, the feedstock was chosen to perform the molding, debinding cycle and sintering. An Al-Si (20 wt. %) alloy part was successfully produced using this new method.

Preliminary study of tin slag concrete mixture

NASA Astrophysics Data System (ADS)

Hashim, Mohd Jamil; Mansor, Ishak; Pauzi Ismail, Mohamad; Sani, Suhairy; Azmi, Azhar; Sayuti, Shaharudin; Zaidi Ibrahim, Mohd; Adli Anuar, Abul; Rahim, Abdul Adha Abdul

2018-01-01

The study focuses on practices to facilitate tin smelting industry to reduce radioactive waste product (Tin Slag) by diluting its radioactivity to a safe level and turning it to a safer infrastructural building product. In the process the concrete mix which include Portland cement, sand, tin slag, water and plasticizer are used to produce interlocking brick pavements, piles and other infrastructural products. The mixing method follows DOE (UK) standard method of mixing targeted at in selected compressive strength suitable for its function and durability. A batching machine is used in the mixing and six test cubes are produced for the test. The testing equipment used are a compressional machine, ultrasonic measurement and a Geiger Muller counter to evaluate of the concrete mix to find the lowest emission of radiation surface dose without compromising the strength of concrete mix. The result obtained indicated the radioactivity of tin slag in the mixing process has reduced to background level that is 0.5μSv/h while the strength and workability of the concrete has not been severely affected. In conclusion, the concrete mix with tin slag has shown the potential it can be turned into a safe beneficial infrastructural product with good strength.

Aluminum phosphate ceramics for waste storage

DOEpatents

Wagh, Arun; Maloney, Martin D

2014-06-03

The present disclosure describes solid waste forms and methods of processing waste. In one particular implementation, the invention provides a method of processing waste that may be particularly suitable for processing hazardous waste. In this method, a waste component is combined with an aluminum oxide and an acidic phosphate component in a slurry. A molar ratio of aluminum to phosphorus in the slurry is greater than one. Water in the slurry may be evaporated while mixing the slurry at a temperature of about 140-200.degree. C. The mixed slurry may be allowed to cure into a solid waste form. This solid waste form includes an anhydrous aluminum phosphate with at least a residual portion of the waste component bound therein.

Scaffolding Argumentation about Water Quality: A Mixed-Method Study in a Rural Middle School

ERIC Educational Resources Information Center

Belland, Brian R.; Gu, Jiangyue; Armbrust, Sara; Cook, Brant

2015-01-01

A common way for students to develop scientific argumentation abilities is through argumentation about socioscientific issues, defined as scientific problems with social, ethical, and moral aspects. Computer-based scaffolding can support students in this process. In this mixed method study, we examined the use and impact of computer based…

Separating and recycling metals from mixed metallic particles of crushed electronic wastes by vacuum metallurgy.

PubMed

Zhan, Lu; Xu, Zhenming

2009-09-15

During the treatment of electronic wastes, a crushing process is usually used to strip metals from various base plates. Several methods have been applied to separate metals from nonmetals. However, mixed metallic particles obtained from these processes are still a mixture of various metals, including some toxic heavy metals such as lead and cadmium. With emphasis on recovering copper and other precious metals, there have hitherto been no satisfactory methods to recover these toxic metals. In this paper, the criterion of separating metals from mixed metallic particles by vacuum metallurgy is built. The results show that the metals with high vapor pressure have been almost recovered completely, leading to a considerable reduction of environmental pollution. In addition, the purity of copper in mixed particles has been improved from about 80 wt % to over 98 wt %.

Achieving Integration in Mixed Methods Designs—Principles and Practices

PubMed Central

Fetters, Michael D; Curry, Leslie A; Creswell, John W

2013-01-01

Mixed methods research offers powerful tools for investigating complex processes and systems in health and health care. This article describes integration principles and practices at three levels in mixed methods research and provides illustrative examples. Integration at the study design level occurs through three basic mixed method designs—exploratory sequential, explanatory sequential, and convergent—and through four advanced frameworks—multistage, intervention, case study, and participatory. Integration at the methods level occurs through four approaches. In connecting, one database links to the other through sampling. With building, one database informs the data collection approach of the other. When merging, the two databases are brought together for analysis. With embedding, data collection and analysis link at multiple points. Integration at the interpretation and reporting level occurs through narrative, data transformation, and joint display. The fit of integration describes the extent the qualitative and quantitative findings cohere. Understanding these principles and practices of integration can help health services researchers leverage the strengths of mixed methods. PMID:24279835

Achieving integration in mixed methods designs-principles and practices.

PubMed

Fetters, Michael D; Curry, Leslie A; Creswell, John W

2013-12-01

Mixed methods research offers powerful tools for investigating complex processes and systems in health and health care. This article describes integration principles and practices at three levels in mixed methods research and provides illustrative examples. Integration at the study design level occurs through three basic mixed method designs-exploratory sequential, explanatory sequential, and convergent-and through four advanced frameworks-multistage, intervention, case study, and participatory. Integration at the methods level occurs through four approaches. In connecting, one database links to the other through sampling. With building, one database informs the data collection approach of the other. When merging, the two databases are brought together for analysis. With embedding, data collection and analysis link at multiple points. Integration at the interpretation and reporting level occurs through narrative, data transformation, and joint display. The fit of integration describes the extent the qualitative and quantitative findings cohere. Understanding these principles and practices of integration can help health services researchers leverage the strengths of mixed methods. © Health Research and Educational Trust.

Monitoring total mixed rations and feed delivery systems.

PubMed

Oelberg, Thomas J; Stone, William

2014-11-01

This article is intended to give practitioners a method to evaluate total mixed ration (TMR) consistency and to give them practical solutions to improve TMR consistency that will improve cattle performance and health. Practitioners will learn how to manage the variation in moisture and nutrients that exists in haylage and corn silage piles and in bales of hay, and methods to reduce variation in the TMR mixing and delivery process. Copyright © 2014 Elsevier Inc. All rights reserved.

Including mixed methods research in systematic reviews: Examples from qualitative syntheses in TB and malaria control

PubMed Central

2012-01-01

Background Health policy makers now have access to a greater number and variety of systematic reviews to inform different stages in the policy making process, including reviews of qualitative research. The inclusion of mixed methods studies in systematic reviews is increasing, but these studies pose particular challenges to methods of review. This article examines the quality of the reporting of mixed methods and qualitative-only studies. Methods We used two completed systematic reviews to generate a sample of qualitative studies and mixed method studies in order to make an assessment of how the quality of reporting and rigor of qualitative-only studies compares with that of mixed-methods studies. Results Overall, the reporting of qualitative studies in our sample was consistently better when compared with the reporting of mixed methods studies. We found that mixed methods studies are less likely to provide a description of the research conduct or qualitative data analysis procedures and less likely to be judged credible or provide rich data and thick description compared with standalone qualitative studies. Our time-related analysis shows that for both types of study, papers published since 2003 are more likely to report on the study context, describe analysis procedures, and be judged credible and provide rich data. However, the reporting of other aspects of research conduct (i.e. descriptions of the research question, the sampling strategy, and data collection methods) in mixed methods studies does not appear to have improved over time. Conclusions Mixed methods research makes an important contribution to health research in general, and could make a more substantial contribution to systematic reviews. Through our careful analysis of the quality of reporting of mixed methods and qualitative-only research, we have identified areas that deserve more attention in the conduct and reporting of mixed methods research. PMID:22545681

Decision Process to Identify Lessons for Transition to a Distributed (or Blended) Learning Instructional Format

DTIC Science & Technology

2009-09-01

instructional format. Using a mixed- method coding and analysis approach, the sample of POIs were categorized, coded, statistically analyzed, and a... Method SECURITY CLASSIFICATION OF 19. LIMITATION OF 20. NUMBER 21. RESPONSIBLE PERSON 16. REPORT Unclassified 17. ABSTRACT...transition to a distributed (or blended) learning format. Procedure: A mixed- methods approach, combining qualitative coding procedures with basic

Study protocol of a mixed-methods evaluation of a cluster randomized trial to improve the safety of NSAID and antiplatelet prescribing: data-driven quality improvement in primary care.

PubMed

Grant, Aileen; Dreischulte, Tobias; Treweek, Shaun; Guthrie, Bruce

2012-08-28

Trials of complex interventions are criticized for being 'black box', so the UK Medical Research Council recommends carrying out a process evaluation to explain the trial findings. We believe it is good practice to pre-specify and publish process evaluation protocols to set standards and minimize bias. Unlike protocols for trials, little guidance or standards exist for the reporting of process evaluations. This paper presents the mixed-method process evaluation protocol of a cluster randomized trial, drawing on a framework designed by the authors. This mixed-method evaluation is based on four research questions and maps data collection to a logic model of how the data-driven quality improvement in primary care (DQIP) intervention is expected to work. Data collection will be predominately by qualitative case studies in eight to ten of the trial practices, focus groups with patients affected by the intervention and quantitative analysis of routine practice data, trial outcome and questionnaire data and data from the DQIP intervention. We believe that pre-specifying the intentions of a process evaluation can help to minimize bias arising from potentially misleading post-hoc analysis. We recognize it is also important to retain flexibility to examine the unexpected and the unintended. From that perspective, a mixed-methods evaluation allows the combination of exploratory and flexible qualitative work, and more pre-specified quantitative analysis, with each method contributing to the design, implementation and interpretation of the other.As well as strengthening the study the authors hope to stimulate discussion among their academic colleagues about publishing protocols for evaluations of randomized trials of complex interventions. DATA-DRIVEN QUALITY IMPROVEMENT IN PRIMARY CARE TRIAL REGISTRATION: ClinicalTrials.gov: NCT01425502.

Turbofan forced mixer-nozzle internal flowfield. Volume 2: Computational fluid dynamic predictions

NASA Technical Reports Server (NTRS)

Werle, M. J.; Vasta, V. N.

1982-01-01

A general program was conducted to develop and assess a computational method for predicting the flow properties in a turbofan forced mixed duct. The detail assessment of the resulting computer code is presented. It was found that the code provided excellent predictions of the kinematics of the mixing process throughout the entire length of the mixer nozzle. The thermal mixing process between the hot core and cold fan flows was found to be well represented in the low speed portion of the flowfield.

Mechanical, thermal and morphological characterization of polycarbonate/oxidized carbon nanofiber composites produced with a lean 2-step manufacturing process.

PubMed

Lively, Brooks; Kumar, Sandeep; Tian, Liu; Li, Bin; Zhong, Wei-Hong

2011-05-01

In this study we report the advantages of a 2-step method that incorporates an additional process pre-conditioning step for rapid and precise blending of the constituents prior to the commonly used melt compounding method for preparing polycarbonate/oxidized carbon nanofiber composites. This additional step (equivalent to a manufacturing cell) involves the formation of a highly concentrated solid nano-nectar of polycarbonate/carbon nanofiber composite using a solution mixing process followed by melt mixing with pure polycarbonate. This combined method yields excellent dispersion and improved mechanical and thermal properties as compared to the 1-step melt mixing method. The test results indicated that inclusion of carbon nanofibers into composites via the 2-step method resulted in dramatically reduced ( 48% lower) coefficient of thermal expansion compared to that of pure polycarbonate and 30% lower than that from the 1-step processing, at the same loading of 1.0 wt%. Improvements were also found in dynamic mechanical analysis and flexural mechanical properties. The 2-step approach is more precise and leads to better dispersion, higher quality, consistency, and improved performance in critical application areas. It is also consistent with Lean Manufacturing principles in which manufacturing cells are linked together using less of the key resources and creates a smoother production flow. Therefore, this 2-step process can be more attractive for industry.

Transfer of Expertise: An Eye Tracking and Think Aloud Study Using Dynamic Medical Visualizations

ERIC Educational Resources Information Center

Gegenfurtner, Andreas; Seppanen, Marko

2013-01-01

Expertise research has produced mixed results regarding the problem of transfer of expertise. Is expert performance context-bound or can the underlying processes be applied to more general situations? The present study tests whether expert performance and its underlying processes transfer to novel tasks within a domain. A mixed method study using…

Enhancing Biodiesel from Kemiri Sunan Oil Manufacturing using Ultrasonics

NASA Astrophysics Data System (ADS)

Supriyadi, Slamet; Purwanto; Anggoro, Didi Dwi; Hermawan

2018-02-01

Kemiri Sunan (Reutalis trisperma (Blanco) Airy Shaw) is a potential plant to be developed as biodiesel feedstock. The advantage of Kemiri Sunan seeds when compared to other biodiesel raw materials is their high oil content. This plant is also very good for land conservation. Due the increasingly demand for biodiesel, research and new methods to increase its biodiesel production continue to be undertaken. The weakness of conventional biodiesel manufacturing process is in the mixing process in which mechanical stirring and heating in the trans-esterification process require more energy and a longer time. A higher and stronger mixing process is required to increase the contact area between the two phases of the mixed substance to produce the emulsion. Ultrasonic is a tool that can be useful for a liquid mixing process that tends to be separated. Ultrasonic waves can cause mixing intensity at the micro level and increase mass transfer, so the reaction can be performed at a much faster rate. This study is to figure out the effect of ultrasonic irradiation on the transesterification process of biodiesel from Kemiri Sunan Oil.

Parents' School Satisfaction and Academic Socialization Predict Adolescents' Autonomous Motivation: A Mixed-Method Study of Low-Income Ethnic Minority Families

ERIC Educational Resources Information Center

Suizzo, Marie-Anne; Jackson, Karen Moran; Pahlke, Erin; McClain, Shannon; Marroquin, Yesenia; Blondeau, Lauren A.; Hong, KyongJoo

2016-01-01

In this mixed-methods study, we used an explanatory sequential design to investigate the processes through which parental involvement influences adolescents' achievement motivation. One hundred twenty low-income urban parents and their sixth-grade adolescents completed questionnaires, and a subsample of 11 mothers and 11 adolescents were…

Personal Goal Setting and Quality of Life: A Mixed Methods Study of Adult Professionals

ERIC Educational Resources Information Center

Ingraham, Frank

2017-01-01

This mixed methods study was designed to examine the potential impactful relationship between personal goal setting and the quality of life satisfaction (built upon the Goal Setting Theory of motivation and performance). The study aimed to determine how influential the goal achievement process is (or is not) regarding personal fulfillment and…

How L2 Legal Writers Use Strategies for Scholarly Writing: A Mixed Methods Study

ERIC Educational Resources Information Center

Bain Butler, Donna

2010-01-01

This dissertation research fills existing gaps regarding the practices and processes of teaching second language (L2) writers at higher ranges of proficiency in law school context. It is a mixed methods, longitudinal, descriptive, writer-centered study. The research purpose was to explore strategic competence as a catalyst for professional…

Development of a Mixed Methods Investigation of Process and Outcomes of Community-Based Participatory Research

ERIC Educational Resources Information Center

Lucero, Julie; Wallerstein, Nina; Duran, Bonnie; Alegria, Margarita; Greene-Moton, Ella; Israel, Barbara; Kastelic, Sarah; Magarati, Maya; Oetzel, John; Pearson, Cynthia; Schulz, Amy; Villegas, Malia; White Hat, Emily R.

2018-01-01

This article describes a mixed methods study of community-based participatory research (CBPR) partnership practices and the links between these practices and changes in health status and disparities outcomes. Directed by a CBPR conceptual model and grounded in indigenous-transformative theory, our nation-wide, cross-site study showcases the value…

Majoring in STEM--What Accounts for Women's Career Decision Making? A Mixed Methods Study

ERIC Educational Resources Information Center

Bieri Buschor, Christine; Berweger, Simone; Keck Frei, Andrea; Kappler, Christa

2014-01-01

The aim of this longitudinal, mixed methods study was to gain an understanding of whether female academic high school students who intended to study science, technology, engineering, or mathematics (STEM) actually enrolled in such studies 2 years later, and how these women perceived this process retrospectively. The results revealed a high…

Teacher Perceptions of the Impact of the Data Team Process on Core Instructional Practices

ERIC Educational Resources Information Center

Schwanenberger, Michael; Ahearn, Christopher

2013-01-01

This paper documents the results of a mixed method study of teachers who participated in a survey and focus groups in a K-12 southwestern suburban school district during the 2011-2012 school year. The mixed method design contains elements of both qualitative and quantitative approaches, permitting the authors to collect qualitative and…

Research Teaching Pedagogy: Lessons Learned from an Arabic Language Intervention Pilot Study

ERIC Educational Resources Information Center

Christ, Thomas W.; Elmetaher, Hosam

2012-01-01

Teaching mixed methods and action research to graduate students has great advantages but also poses interesting challenges. The purpose of this article is to make transparent the process by which a mixed methods research instructor helped inform a student-researcher of the limitations in a pilot study that was compromised by methodology, including…

Qualitative and mixed methods in mental health services and implementation research.

PubMed

Palinkas, Lawrence A

2014-01-01

Qualitative and mixed methods play a prominent role in mental health services research. However, the standards for their use are not always evident, especially for those not trained in such methods. This article reviews the rationale and common approaches to using qualitative and mixed methods in mental health services and implementation research based on a review of the articles included in this special series along with representative examples from the literature. Qualitative methods are used to provide a "thick description" or depth of understanding to complement breadth of understanding afforded by quantitative methods, elicit the perspective of those being studied, explore issues that have not been well studied, develop conceptual theories or test hypotheses, or evaluate the process of a phenomenon or intervention. Qualitative methods adhere to many of the same principles of scientific rigor as quantitative methods but often differ with respect to study design, data collection, and data analysis strategies. For instance, participants for qualitative studies are usually sampled purposefully rather than at random and the design usually reflects an iterative process alternating between data collection and analysis. The most common techniques for data collection are individual semistructured interviews, focus groups, document reviews, and participant observation. Strategies for analysis are usually inductive, based on principles of grounded theory or phenomenology. Qualitative methods are also used in combination with quantitative methods in mixed-method designs for convergence, complementarity, expansion, development, and sampling. Rigorously applied qualitative methods offer great potential in contributing to the scientific foundation of mental health services research.

Connecting the Dots and Merging Meaning: Using Mixed Methods to Study Primary Care Delivery Transformation

PubMed Central

Scammon, Debra L; Tomoaia-Cotisel, Andrada; Day, Rachel L; Day, Julie; Kim, Jaewhan; Waitzman, Norman J; Farrell, Timothy W; Magill, Michael K

2013-01-01

Objective. To demonstrate the value of mixed methods in the study of practice transformation and illustrate procedures for connecting methods and for merging findings to enhance the meaning derived. Data Source/Study Setting. An integrated network of university-owned, primary care practices at the University of Utah (Community Clinics or CCs). CC has adopted Care by Design, its version of the Patient Centered Medical Home. Study Design. Convergent case study mixed methods design. Data Collection/Extraction Methods. Analysis of archival documents, internal operational reports, in-clinic observations, chart audits, surveys, semistructured interviews, focus groups, Centers for Medicare and Medicaid Services database, and the Utah All Payer Claims Database. Principal Findings. Each data source enriched our understanding of the change process and understanding of reasons that certain changes were more difficult than others both in general and for particular clinics. Mixed methods enabled generation and testing of hypotheses about change and led to a comprehensive understanding of practice change. Conclusions. Mixed methods are useful in studying practice transformation. Challenges exist but can be overcome with careful planning and persistence. PMID:24279836

Investigation of hazards associated with plastic bonded starter mix manufacturing processes

NASA Technical Reports Server (NTRS)

1971-01-01

An investigation to determine the hazards potential evaluation of plastic bonded starter mix (PBSM) production processes and the application to the M18 and M7A3 grenades is reported. The investigation indicated: (1) the materials with the greatest hazards characteristics, (2) process operating stations most likely to initiate hazardous conditions, (3) the test program required to examine ignition characteristics and process hazards, and (4) the method of handling the accumulated information from testing and safety analyses.

Analysis of mixed model in gear transmission based on ADAMS

NASA Astrophysics Data System (ADS)

Li, Xiufeng; Wang, Yabin

2012-09-01

The traditional method of mechanical gear driving simulation includes gear pair method and solid to solid contact method. The former has higher solving efficiency but lower results accuracy; the latter usually obtains higher precision of results while the calculation process is complex, also it is not easy to converge. Currently, most of the researches are focused on the description of geometric models and the definition of boundary conditions. However, none of them can solve the problems fundamentally. To improve the simulation efficiency while ensure the results with high accuracy, a mixed model method which uses gear tooth profiles to take the place of the solid gear to simulate gear movement is presented under these circumstances. In the process of modeling, build the solid models of the mechanism in the SolidWorks firstly; Then collect the point coordinates of outline curves of the gear using SolidWorks API and create fit curves in Adams based on the point coordinates; Next, adjust the position of those fitting curves according to the position of the contact area; Finally, define the loading conditions, boundary conditions and simulation parameters. The method provides gear shape information by tooth profile curves; simulates the mesh process through tooth profile curve to curve contact and offer mass as well as inertia data via solid gear models. This simulation process combines the two models to complete the gear driving analysis. In order to verify the validity of the method presented, both theoretical derivation and numerical simulation on a runaway escapement are conducted. The results show that the computational efficiency of the mixed model method is 1.4 times over the traditional method which contains solid to solid contact. Meanwhile, the simulation results are more closely to theoretical calculations. Consequently, mixed model method has a high application value regarding to the study of the dynamics of gear mechanism.

PIPS-SBB: A Parallel Distributed-Memory Branch-and-Bound Algorithm for Stochastic Mixed-Integer Programs

DOE PAGES

Munguia, Lluis-Miquel; Oxberry, Geoffrey; Rajan, Deepak

2016-05-01

Stochastic mixed-integer programs (SMIPs) deal with optimization under uncertainty at many levels of the decision-making process. When solved as extensive formulation mixed- integer programs, problem instances can exceed available memory on a single workstation. In order to overcome this limitation, we present PIPS-SBB: a distributed-memory parallel stochastic MIP solver that takes advantage of parallelism at multiple levels of the optimization process. We also show promising results on the SIPLIB benchmark by combining methods known for accelerating Branch and Bound (B&B) methods with new ideas that leverage the structure of SMIPs. Finally, we expect the performance of PIPS-SBB to improve furthermore » as more functionality is added in the future.« less

A Systematic Review of Mixed Methods Research on Human Factors and Ergonomics in Health Care

PubMed Central

Carayon, Pascale; Kianfar, Sarah; Li, Yaqiong; Xie, Anping; Alyousef, Bashar; Wooldridge, Abigail

2016-01-01

This systematic literature review provides information on the use of mixed methods research in human factors and ergonomics (HFE) research in health care. Using the PRISMA methodology, we searched four databases (PubMed, PsycInfo, Web of Science, and Engineering Village) for studies that met the following inclusion criteria: (1) field study in health care, (2) mixing of qualitative and quantitative data, (3) HFE issues, and (4) empirical evidence. Using an iterative and collaborative process supported by a structured data collection form, the six authors identified a total of 58 studies that primarily address HFE issues in health information technology (e.g., usability) and in the work of healthcare workers. About two-thirds of the mixed methods studies used the convergent parallel study design where quantitative and qualitative data were collected simultaneously. A variety of methods were used for collecting data, including interview, survey and observation. The most frequent combination involved interview for qualitative data and survey for quantitative data. The use of mixed methods in healthcare HFE research has increased over time. However, increasing attention should be paid to the formal literature on mixed methods research to enhance the depth and breadth of this research. PMID:26154228

Experiment Analysis and Modelling of Compaction Behaviour of Ag60Cu30Sn10 Mixed Metal Powders

NASA Astrophysics Data System (ADS)

Zhou, Mengcheng; Huang, Shangyu; Liu, Wei; Lei, Yu; Yan, Shiwei

2018-03-01

A novel process method combines powder compaction and sintering was employed to fabricate thin sheets of cadmium-free silver based filler metals, the compaction densification behaviour of Ag60Cu30Sn10 mixed metal powders was investigated experimentally. Based on the equivalent density method, the density-dependent Drucker-Prager Cap (DPC) model was introduced to model the powder compaction behaviour. Various experiment procedures were completed to determine the model parameters. The friction coefficients in lubricated and unlubricated die were experimentally determined. The determined material parameters were validated by experiments and numerical simulation of powder compaction process using a user subroutine (USDFLD) in ABAQUS/Standard. The good agreement between the simulated and experimental results indicates that the determined model parameters are able to describe the compaction behaviour of the multicomponent mixed metal powders, which can be further used for process optimization simulations.

Mixing in wicking structures and the use of enhanced mixing within wicks in microchannel devices

DOEpatents

Stenkamp, Victoria S [Richland, WA; TeGrotenhuis, Ward E [Kennewick, WA; Wegeng, Robert S [Alexandria, VA

2009-06-02

Advanced wicking structures and methods utilizing these structures are described. The use of advanced wicking structures can promote rapid mass transfer while maintaining high capillary pressure through the use of small pores. Particularly improved results in fluid contacting processes can be achieved by enhanced mixing within a wicking layer within a microchannel.

Mixing in wicking structures and the use of enhanced mixing within wicks in microchannel devices

DOEpatents

Stenkamp, Victoria S [Richland, WA; TeGrotenhuis, Ward E [Kennewick, WA; Wegeng, Robert S [Richland, WA

2011-04-19

Advanced wicking structures and methods utilizing these structures are described. The use of advanced wicking structures can promote rapid mass transfer while maintaining high capillary pressure through the use of small pores. Particularly improved results in fluid contacting processes can be achieved by enhanced mixing within a wicking layer within a microchannel.

The Particle Distribution in Liquid Metal with Ceramic Particles Mould Filling Process

NASA Astrophysics Data System (ADS)

Dong, Qi; Xing, Shu-ming

2017-09-01

Adding ceramic particles in the plate hammer is an effective method to increase the wear resistance of the hammer. The liquid phase method is based on the “with the flow of mixed liquid forging composite preparation of ZTA ceramic particle reinforced high chromium cast iron hammer. Preparation method for this system is using CFD simulation analysis the particles distribution of flow mixing and filling process. Taking the 30% volume fraction of ZTA ceramic composite of high chromium cast iron hammer as example, by changing the speed of liquid metal viscosity to control and make reasonable predictions of particles distribution before solidification.

Electroosmotic mixing in microchannels.

PubMed

Glasgow, Ian; Batton, John; Aubry, Nadine

2004-12-01

Mixing is an essential, yet challenging, process step for many Lab on a Chip (LOC) applications. This paper presents a method of mixing for microfluidic devices that relies upon electroosmotic flow. In physical tests and in computer simulations, we periodically vary the electric field with time to mix two aqueous solutions. Good mixing is shown to occur when the electroosmotic flow at the two inlets pulse out of phase, the Strouhal number is on the order of 1, and the pulse volumes are on the order of the intersection volume.

Feasibility of Using Gluconolactone, Trehalose and Hydroxy-Propyl Gamma Cyclodextrin to Enhance Bendroflumethiazide Dissolution Using Lyophilisation and Physical Mixing Techniques.

PubMed

Saleh, Ashraf; McGarry, Kenneth; Chaw, Cheng Shu; Elkordy, Amal Ali

2018-02-01

Hydrophobic drugs are facing a major challenge in dissolution rate enhancement and solubility in aqueous solutions; therefore, a variety of methods have been used to improve dissolution rate and/or solubility of bendroflumethiazide as a model hydrophobic drug. In this study, two main methods (physical mixing and lyophilisation) were used with gluconolactone, hydroxyl propyl γ-ccyclodextrin, and trehalose to explore this challenge. Bendroflumethiazide, practically insoluble in water, was mixed with one of the three excipients gluconolactone, hydroxyl propyl γ-cyclodextrin, and trehalose in three different ratios 1:1, 1:2, 1:5. To the best of our knowledge, the dissolution of the drug has not been previously enhanced by using either these methods or any of the used excipients. Samples containing drug and each of the excipients were characterized via dissolution testing, Fourier Transform infra-red spectroscopy, differential scanning calorimetry, and scanning electron microscopy. The used methods showed a significant enhancement in dug dissolution rate; physical mixing significantly, p < 0.05, increased the percentage of the drug released with time; for example, bendroflumethiazide dissolution in distilled water was improved from less than 20% to 99.79% within 90 min for physically mixed drug-cyclodextrin 1:5. The lyophilisation process was enhanced and the drug dissolution rate and the highest drug dissolution was achieved for (drug-gluconolactone 1:1) with 98.98% drug release within 90 min. the physical mixing and freeze drying processes significantly increased the percentage of drug release with time.

Quantification of polyhydroxyalkanoates in mixed and pure cultures biomass by Fourier transform infrared spectroscopy: comparison of different approaches.

PubMed

Isak, I; Patel, M; Riddell, M; West, M; Bowers, T; Wijeyekoon, S; Lloyd, J

2016-08-01

Fourier transform infrared (FTIR) spectroscopy was used in this study for the rapid quantification of polyhydroxyalkanoates (PHA) in mixed and pure culture bacterial biomass. Three different statistical analysis methods (regression, partial least squares (PLS) and nonlinear) were applied to the FTIR data and the results were plotted against the PHA values measured with the reference gas chromatography technique. All methods predicted PHA content in mixed culture biomass with comparable efficiency, indicated by similar residuals values. The PHA in these cultures ranged from low to medium concentration (0-44 wt% of dried biomass content). However, for the analysis of the combined mixed and pure culture biomass with PHA concentration ranging from low to high (0-93% of dried biomass content), the PLS method was most efficient. This paper reports, for the first time, the use of a single calibration model constructed with a combination of mixed and pure cultures covering a wide PHA range, for predicting PHA content in biomass. Currently no one universal method exists for processing FTIR data for polyhydroxyalkanoates (PHA) quantification. This study compares three different methods of analysing FTIR data for quantification of PHAs in biomass. A new data-processing approach was proposed and the results were compared against existing literature methods. Most publications report PHA quantification of medium range in pure culture. However, in our study we encompassed both mixed and pure culture biomass containing a broader range of PHA in the calibration curve. The resulting prediction model is useful for rapid quantification of a wider range of PHA content in biomass. © 2016 The Society for Applied Microbiology.

Chemical Safety Alert: Identifying Chemical Reactivity Hazards Preliminary Screening Method

EPA Pesticide Factsheets

Introduces small-to-medium-sized facilities to a method developed by Center for Chemical Process Safety (CCPS), based on a series of twelve yes-or-no questions to help determine hazards in warehousing, repackaging, blending, mixing, and processing.

Methods for the continuous production of plastic scintillator materials

DOEpatents

Bross, Alan; Pla-Dalmau, Anna; Mellott, Kerry

1999-10-19

Methods for producing plastic scintillating material employing either two major steps (tumble-mix) or a single major step (inline-coloring or inline-doping). Using the two step method, the polymer pellets are mixed with silicone oil, and the mixture is then tumble mixed with the dopants necessary to yield the proper response from the scintillator material. The mixture is then placed in a compounder and compounded in an inert gas atmosphere. The resultant scintillator material is then extruded and pelletized or formed. When only a single step is employed, the polymer pellets and dopants are metered into an inline-coloring extruding system. The mixture is then processed under a inert gas atmosphere, usually argon or nitrogen, to form plastic scintillator material in the form of either scintillator pellets, for subsequent processing, or as material in the direct formation of the final scintillator shape or form.

Connecting the dots and merging meaning: using mixed methods to study primary care delivery transformation.

PubMed

Scammon, Debra L; Tomoaia-Cotisel, Andrada; Day, Rachel L; Day, Julie; Kim, Jaewhan; Waitzman, Norman J; Farrell, Timothy W; Magill, Michael K

2013-12-01

To demonstrate the value of mixed methods in the study of practice transformation and illustrate procedures for connecting methods and for merging findings to enhance the meaning derived. An integrated network of university-owned, primary care practices at the University of Utah (Community Clinics or CCs). CC has adopted Care by Design, its version of the Patient Centered Medical Home. Convergent case study mixed methods design. Analysis of archival documents, internal operational reports, in-clinic observations, chart audits, surveys, semistructured interviews, focus groups, Centers for Medicare and Medicaid Services database, and the Utah All Payer Claims Database. Each data source enriched our understanding of the change process and understanding of reasons that certain changes were more difficult than others both in general and for particular clinics. Mixed methods enabled generation and testing of hypotheses about change and led to a comprehensive understanding of practice change. Mixed methods are useful in studying practice transformation. Challenges exist but can be overcome with careful planning and persistence. © Health Research and Educational Trust.

How Do High School Students Solve Probability Problems? A Mixed Methods Study on Probabilistic Reasoning

ERIC Educational Resources Information Center

Heyvaert, Mieke; Deleye, Maarten; Saenen, Lore; Van Dooren, Wim; Onghena, Patrick

2018-01-01

When studying a complex research phenomenon, a mixed methods design allows to answer a broader set of research questions and to tap into different aspects of this phenomenon, compared to a monomethod design. This paper reports on how a sequential equal status design (QUAN ? QUAL) was used to examine students' reasoning processes when solving…

A Mixed-Method Study of Princeville's Rebuilding from the Flood of 1999: Lessons on the Importance of Invisible Community Assets

ERIC Educational Resources Information Center

Yoon, Intae

2009-01-01

Guided by previous studies and the community assets perspective, a concurrent mixed-method case study was conducted five years after a devastating flood to investigate how invisible community assets played a role in Princeville's rebuilding process from the flood of 1999. The independent variables in this study included retrospectively assessed…

How Do We Know What Is Happening Online?: A Mixed Methods Approach to Analysing Online Activity

ERIC Educational Resources Information Center

Charalampidi, Marina; Hammond, Michael

2016-01-01

Purpose: The purpose of this paper is to discuss the process of analysing online discussion and argue for the merits of mixed methods. Much research of online participation and e-learning has been either message-focused or person-focused. The former covers methodologies such as content and discourse analysis, the latter interviewing and surveys.…

Using a Mixed Methods Approach to Explore Strategies, Metacognitive Awareness and the Effects of Task Design on Listening Development

ERIC Educational Resources Information Center

O'Bryan, Anne; Hegelheimer, Volker

2009-01-01

Although research in the area of listening processes and strategies is increasing, it still remains the least understood and least researched of the four skills (Vandergrift, 2007). Based on research in listening comprehension, task design and strategies, this article uses a mixed methods approach to shed light on the development of four…

Measuring patterns in team interaction sequences using a discrete recurrence approach.

PubMed

Gorman, Jamie C; Cooke, Nancy J; Amazeen, Polemnia G; Fouse, Shannon

2012-08-01

Recurrence-based measures of communication determinism and pattern information are described and validated using previously collected team interaction data. Team coordination dynamics has revealed that"mixing" team membership can lead to flexible interaction processes, but keeping a team "intact" can lead to rigid interaction processes. We hypothesized that communication of intact teams would have greater determinism and higher pattern information compared to that of mixed teams. Determinism and pattern information were measured from three-person Uninhabited Air Vehicle team communication sequences over a series of 40-minute missions. Because team members communicated using push-to-talk buttons, communication sequences were automatically generated during each mission. The Composition x Mission determinism effect was significant. Intact teams' determinism increased over missions, whereas mixed teams' determinism did not change. Intact teams had significantly higher maximum pattern information than mixed teams. Results from these new communication analysis methods converge with content-based methods and support our hypotheses. Because they are not content based, and because they are automatic and fast, these new methods may be amenable to real-time communication pattern analysis.

A scoring system for appraising mixed methods research, and concomitantly appraising qualitative, quantitative and mixed methods primary studies in Mixed Studies Reviews.

PubMed

Pluye, Pierre; Gagnon, Marie-Pierre; Griffiths, Frances; Johnson-Lafleur, Janique

2009-04-01

A new form of literature review has emerged, Mixed Studies Review (MSR). These reviews include qualitative, quantitative and mixed methods studies. In the present paper, we examine MSRs in health sciences, and provide guidance on processes that should be included and reported. However, there are no valid and usable criteria for concomitantly appraising the methodological quality of the qualitative, quantitative and mixed methods studies. To propose criteria for concomitantly appraising the methodological quality of qualitative, quantitative and mixed methods studies or study components. A three-step critical review was conducted. 2322 references were identified in MEDLINE, and their titles and abstracts were screened; 149 potentially relevant references were selected and the full-text papers were examined; 59 MSRs were retained and scrutinized using a deductive-inductive qualitative thematic data analysis. This revealed three types of MSR: convenience, reproducible, and systematic. Guided by a proposal, we conducted a qualitative thematic data analysis of the quality appraisal procedures used in the 17 systematic MSRs (SMSRs). Of 17 SMSRs, 12 showed clear quality appraisal procedures with explicit criteria but no SMSR used valid checklists to concomitantly appraise qualitative, quantitative and mixed methods studies. In two SMSRs, criteria were developed following a specific procedure. Checklists usually contained more criteria than needed. In four SMSRs, a reliability assessment was described or mentioned. While criteria for quality appraisal were usually based on descriptors that require specific methodological expertise (e.g., appropriateness), no SMSR described the fit between reviewers' expertise and appraised studies. Quality appraisal usually resulted in studies being ranked by methodological quality. A scoring system is proposed for concomitantly appraising the methodological quality of qualitative, quantitative and mixed methods studies for SMSRs. This scoring system may also be used to appraise the methodological quality of qualitative, quantitative and mixed methods components of mixed methods research.

Use of recycled chunk rubber asphalt concrete (CRAC) on low volume roads and use of recycled crumb rubber modifier in asphalt pavements. Final report, June 1993-June 1995

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hossain, M.; Funk, L.P.; Sadeq, M.A.

1995-06-01

The major objective of this project was to formulate a Chunk Rubber Asphalt Concrete (CRAC) mix for use on low volume roads. CRAC is a rubber modified asphalt concrete product produced by the `dry process` where rubber chunks of 1/2 inch size are used as aggregate in a cold mix with a type C fly ash. The second objective of this project was to develop guidelines concerning the use of rubber modified asphalt concrete hot mix to include: (1) Design methods for use of asphalt-rubber mix for new construction and overlay, (2) Mix design method for asphalt-rubber, and (3) Testmore » method for determining the amount of rubber in an asphalt-rubber concrete for quality control purposes.« less

Process for etching mixed metal oxides

DOEpatents

Ashby, Carol I. H.; Ginley, David S.

1994-01-01

An etching process using dicarboxylic and tricarboxylic acids as chelating etchants for mixed metal oxide films such as high temperature superconductors and ferroelectric materials. Undesirable differential etching rates between different metal oxides are avoided by selection of the proper acid or combination of acids. Feature sizes below one micron, excellent quality vertical edges, and film thicknesses in the 100 Angstom range may be achieved by this method.

Hepa filter dissolution process

DOEpatents

Brewer, Ken N.; Murphy, James A.

1994-01-01

A process for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal.

Stretching of passive tracers and implications for mantle mixing

NASA Astrophysics Data System (ADS)

Conjeepuram, N.; Kellogg, L. H.

2007-12-01

Mid ocean ridge basalts(MORB) and ocean island basalts(OIB) have fundamentally different geochemical signatures. Understanding this difference requires a fundamental knowledge of the mixing processes that led to their formation. Quantitative methods used to assess mixing include examining the distribution of passive tracers, attaching time-evolution information to simulate decay of radioactive isotopes, and, for chaotic flows, calculating the Lyapunov exponent, which characterizes whether two nearby particles diverge at an exponential rate. Although effective, these methods are indirect measures of the two fundamental processes associated with mixing namely, stretching and folding. Building on work done by Kellogg and Turcotte, we present a method to compute the stretching and thinning of a passive, ellipsoidal tracer in three orthogonal directions in isoviscous, incompressible three dimensional flows. We also compute the Lyapunov exponents associated with the given system based on the quantitative measures of stretching and thinning. We test our method with two analytical and three numerical flow fields which exhibit Lagrangian turbulence. The ABC and STF class of analytical flows are a three and two parameter class of flows respectively and have been well studied for fast dynamo action. Since they generate both periodic and chaotic particle paths depending either on the starting point or on the choice of the parameters, they provide a good foundation to understand mixing. The numerical flow fields are similar to the geometries used by Ferrachat and Ricard (1998) and emulate a ridge - transform system. We also compute the stable and unstable manifolds associated with the numerical flow fields to illustrate the directions of rapid and slow mixing. We find that stretching in chaotic flow fields is significantly more effective than regular or periodic flow fields. Consequently, chaotic mixing is far more efficient than regular mixing. We also find that in the numerical flow field, there is a fundamental topological difference in the regions exhibiting slow or regular mixing for different model geometries.

Fluid Structure Interaction Techniques For Extrusion And Mixing Processes

NASA Astrophysics Data System (ADS)

Valette, Rudy; Vergnes, Bruno; Coupez, Thierry

2007-05-01

This work focuses on the development of numerical techniques devoted to the simulation of mixing processes of complex fluids such as twin-screw extrusion or batch mixing. In mixing process simulation, the absence of symmetry of the moving boundaries (the screws or the rotors) implies that their rigid body motion has to be taken into account by using a special treatment We therefore use a mesh immersion technique (MIT), which consists in using a P1+/P1-based (MINI-element) mixed finite element method for solving the velocity-pressure problem and then solving the problem in the whole barrel cavity by imposing a rigid motion (rotation) to nodes found located inside the so called immersed domain, each sub-domain (screw, rotor) being represented by a surface CAD mesh (or its mathematical equation in simple cases). The independent meshes are immersed into a unique background computational mesh by computing the distance function to their boundaries. Intersections of meshes are accounted for, allowing to compute a fill factor usable as for the VOF methodology. This technique, combined with the use of parallel computing, allows to compute the time-dependent flow of generalized Newtonian fluids including yield stress fluids in a complex system such as a twin screw extruder, including moving free surfaces, which are treated by a "level set" and Hamilton-Jacobi method.

An approach to optimize the batch mixing process for improving the quality consistency of the products made from traditional Chinese medicines*

PubMed Central

Yan, Bin-jun; Qu, Hai-bin

2013-01-01

The efficacy of traditional Chinese medicine (TCM) is based on the combined effects of its constituents. Variation in chemical composition between batches of TCM has always been the deterring factor in achieving consistency in efficacy. The batch mixing process can significantly reduce the batch-to-batch quality variation in TCM extracts by mixing them in a well-designed proportion. However, reducing the quality variation without sacrificing too much of the production efficiency is one of the challenges. Accordingly, an innovative and practical batch mixing method aimed at providing acceptable efficiency for industrial production of TCM products is proposed in this work, which uses a minimum number of batches of extracts to meet the content limits. The important factors affecting the utilization ratio of the extracts (URE) were studied by simulations. The results have shown that URE was affected by the correlation between the contents of constituents, and URE decreased with the increase in the number of targets and the relative standard deviations of the contents. URE could be increased by increasing the number of storage tanks. The results have provided a reference for designing the batch mixing process. The proposed method has possible application value in reducing the quality variation in TCM and providing acceptable production efficiency simultaneously. PMID:24190450

An approach to optimize the batch mixing process for improving the quality consistency of the products made from traditional Chinese medicines.

PubMed

Yan, Bin-jun; Qu, Hai-bin

2013-11-01

The efficacy of traditional Chinese medicine (TCM) is based on the combined effects of its constituents. Variation in chemical composition between batches of TCM has always been the deterring factor in achieving consistency in efficacy. The batch mixing process can significantly reduce the batch-to-batch quality variation in TCM extracts by mixing them in a well-designed proportion. However, reducing the quality variation without sacrificing too much of the production efficiency is one of the challenges. Accordingly, an innovative and practical batch mixing method aimed at providing acceptable efficiency for industrial production of TCM products is proposed in this work, which uses a minimum number of batches of extracts to meet the content limits. The important factors affecting the utilization ratio of the extracts (URE) were studied by simulations. The results have shown that URE was affected by the correlation between the contents of constituents, and URE decreased with the increase in the number of targets and the relative standard deviations of the contents. URE could be increased by increasing the number of storage tanks. The results have provided a reference for designing the batch mixing process. The proposed method has possible application value in reducing the quality variation in TCM and providing acceptable production efficiency simultaneously.

Discrete element simulation of charging and mixed layer formation in the ironmaking blast furnace

NASA Astrophysics Data System (ADS)

Mitra, Tamoghna; Saxén, Henrik

2016-11-01

The burden distribution in the ironmaking blast furnace plays an important role for the operation as it affects the gas flow distribution, heat and mass transfer, and chemical reactions in the shaft. This work studies certain aspects of burden distribution by small-scale experiments and numerical simulation by the discrete element method (DEM). Particular attention is focused on the complex layer-formation process and the problems associated with estimating the burden layer distribution by burden profile measurements. The formation of mixed layers is studied, and a computational method for estimating the extent of the mixed layer, as well as its voidage, is proposed and applied on the results of the DEM simulations. In studying a charging program and its resulting burden distribution, the mixed layers of coke and pellets were found to show lower voidage than the individual burden layers. The dynamic evolution of the mixed layer during the charging process is also analyzed. The results of the study can be used to gain deeper insight into the complex charging process of the blast furnace, which is useful in the design of new charging programs and for mathematical models that do not consider the full behavior of the particles in the burden layers.

Process for the encapsulation and stabilization of radioactive, hazardous and mixed wastes

DOEpatents

Colombo, Peter; Kalb, Paul D.; Heiser, III, John H.

1997-11-14

The present invention provides a method for encapsulating and stabilizing radioactive, hazardous and mixed wastes in a modified sulfur cement composition. The waste may be incinerator fly ash or bottom ash including radioactive contaminants, toxic metal salts and other wastes commonly found in refuse. The process may use glass fibers mixed into the composition to improve the tensile strength and a low concentration of anhydrous sodium sulfide to reduce toxic metal solubility. The present invention preferably includes a method for encapsulating radioactive, hazardous and mixed wastes by combining substantially anhydrous wastes, molten modified sulfur cement, preferably glass fibers, as well as anhydrous sodium sulfide or calcium hydroxide or sodium hydroxide in a heated double-planetary orbital mixer. The modified sulfur cement is preheated to about 135.degree..+-.5.degree. C., then the remaining substantially dry components are added and mixed to homogeneity. The homogeneous molten mixture is poured or extruded into a suitable mold. The mold is allowed to cool, while the mixture hardens, thereby immobilizing and encapsulating the contaminants present in the ash.

An equivalent domain integral method for three-dimensional mixed-mode fracture problems

NASA Technical Reports Server (NTRS)

Shivakumar, K. N.; Raju, I. S.

1991-01-01

A general formulation of the equivalent domain integral (EDI) method for mixed mode fracture problems in cracked solids is presented. The method is discussed in the context of a 3-D finite element analysis. The J integral consists of two parts: the volume integral of the crack front potential over a torus enclosing the crack front and the crack surface integral due to the crack front potential plus the crack face loading. In mixed mode crack problems the total J integral is split into J sub I, J sub II, and J sub III representing the severity of the crack front in three modes of deformations. The direct and decomposition methods are used to separate the modes. These two methods were applied to several mixed mode fracture problems, were analyzed, and results were found to agree well with those available in the literature. The method lends itself to be used as a post-processing subroutine in a general purpose finite element program.

An equivalent domain integral method for three-dimensional mixed-mode fracture problems

NASA Technical Reports Server (NTRS)

Shivakumar, K. N.; Raju, I. S.

1992-01-01

A general formulation of the equivalent domain integral (EDI) method for mixed mode fracture problems in cracked solids is presented. The method is discussed in the context of a 3-D finite element analysis. The J integral consists of two parts: the volume integral of the crack front potential over a torus enclosing the crack front and the crack surface integral due to the crack front potential plus the crack face loading. In mixed mode crack problems the total J integral is split into J sub I, J sub II, and J sub III representing the severity of the crack front in three modes of deformations. The direct and decomposition methods are used to separate the modes. These two methods were applied to several mixed mode fracture problems, were analyzed, and results were found to agree well with those available in the literature. The method lends itself to be used as a post-processing subroutine in a general purpose finite element program.

Meeting the Challenge of Doing an RCT Evaluation of Youth Mentoring in Ireland: A Journey in Mixed Methods

ERIC Educational Resources Information Center

Brady, Bernadine; O'Regan, Connie

2009-01-01

The youth mentoring program Big Brothers Big Sisters is one of the first social interventions involving youth in Ireland to be evaluated using a randomized controlled trial methodology. This article sets out the design process undertaken, describing how the research team came to adopt a concurrent embedded mixed methods design as a means of…

Plastometry for the Self-Compacting Concrete Mixes

NASA Astrophysics Data System (ADS)

Lapsa, V. Ā.; Krasnikovs, A.; Lusis, V.; Lukasenoks, A.

2015-11-01

Operative determination of consistence of self-compacting concrete mixes at plant or in construction conditions is an important problem in building practice. The Abram's cone, the Vebe's device, the U-box siphon, L-box or funnel tests are used in solving this problem. However, these field methods are targeted at determination of some indirect parameters of such very complicated paste-like material like concrete mix. They are not physical characteristics suitable for the rheological calculations of the coherence between the stress and strains, flow characteristics and the reaction of the concrete mix in different technological processes. A conical plastometer having higher precision and less sensitive to the inaccuracy of the tests in construction condition has been elaborated at the Concrete Mechanics Laboratory of RTU. In addition, a new method was elaborated for the calculation of plasticity limit τ0 taking into account the buoyancy force of the liquid or non-liquid concrete mix. In the present investigation rheological test of the concrete mix by use the plastometer and the method mentioned earlier was conducted for different self-compacting and not self-compacting concrete mixes.

Identification of DNA-Binding Proteins Using Mixed Feature Representation Methods.

PubMed

Qu, Kaiyang; Han, Ke; Wu, Song; Wang, Guohua; Wei, Leyi

2017-09-22

DNA-binding proteins play vital roles in cellular processes, such as DNA packaging, replication, transcription, regulation, and other DNA-associated activities. The current main prediction method is based on machine learning, and its accuracy mainly depends on the features extraction method. Therefore, using an efficient feature representation method is important to enhance the classification accuracy. However, existing feature representation methods cannot efficiently distinguish DNA-binding proteins from non-DNA-binding proteins. In this paper, a multi-feature representation method, which combines three feature representation methods, namely, K-Skip-N-Grams, Information theory, and Sequential and structural features (SSF), is used to represent the protein sequences and improve feature representation ability. In addition, the classifier is a support vector machine. The mixed-feature representation method is evaluated using 10-fold cross-validation and a test set. Feature vectors, which are obtained from a combination of three feature extractions, show the best performance in 10-fold cross-validation both under non-dimensional reduction and dimensional reduction by max-relevance-max-distance. Moreover, the reduced mixed feature method performs better than the non-reduced mixed feature technique. The feature vectors, which are a combination of SSF and K-Skip-N-Grams, show the best performance in the test set. Among these methods, mixed features exhibit superiority over the single features.

Combined qualitative and quantitative research designs.

PubMed

Seymour, Jane

2012-12-01

Mixed methods research designs have been recognized as important in addressing complexity and are recommended particularly in the development and evaluation of complex interventions. This article reports a review of studies in palliative care published between 2010 and March 2012 that combine qualitative and quantitative approaches. A synthesis of approaches to mixed methods research taken in 28 examples of published research studies of relevance to palliative and supportive care is provided, using a typology based on a classic categorization put forward in 1992. Mixed-method studies are becoming more frequently employed in palliative care research and resonate with the complexity of the palliative care endeavour. Undertaking mixed methods research requires a sophisticated understanding of the research process and recognition of some of the underlying complexities encountered when working with different traditions and perspectives on issues of: sampling, validity, reliability and rigour, different sources of data and different data collection and analysis techniques.

A systematic review of mixed methods research on human factors and ergonomics in health care.

PubMed

Carayon, Pascale; Kianfar, Sarah; Li, Yaqiong; Xie, Anping; Alyousef, Bashar; Wooldridge, Abigail

2015-11-01

This systematic literature review provides information on the use of mixed methods research in human factors and ergonomics (HFE) research in health care. Using the PRISMA methodology, we searched four databases (PubMed, PsycInfo, Web of Science, and Engineering Village) for studies that met the following inclusion criteria: (1) field study in health care, (2) mixing of qualitative and quantitative data, (3) HFE issues, and (4) empirical evidence. Using an iterative and collaborative process supported by a structured data collection form, the six authors identified a total of 58 studies that primarily address HFE issues in health information technology (e.g., usability) and in the work of healthcare workers. About two-thirds of the mixed methods studies used the convergent parallel study design where quantitative and qualitative data were collected simultaneously. A variety of methods were used for collecting data, including interview, survey and observation. The most frequent combination involved interview for qualitative data and survey for quantitative data. The use of mixed methods in healthcare HFE research has increased over time. However, increasing attention should be paid to the formal literature on mixed methods research to enhance the depth and breadth of this research. Copyright © 2015. Published by Elsevier Ltd.

Process for etching mixed metal oxides

DOEpatents

Ashby, C.I.H.; Ginley, D.S.

1994-10-18

An etching process is described using dicarboxylic and tricarboxylic acids as chelating etchants for mixed metal oxide films such as high temperature superconductors and ferroelectric materials. Undesirable differential etching rates between different metal oxides are avoided by selection of the proper acid or combination of acids. Feature sizes below one micron, excellent quality vertical edges, and film thicknesses in the 100 Angstrom range may be achieved by this method. 1 fig.

Mixing qualitative and quantitative research in developmental science: uses and methodological choices.

PubMed

Yoshikawa, Hirokazu; Weisner, Thomas S; Kalil, Ariel; Way, Niobe

2008-03-01

Multiple methods are vital to understanding development as a dynamic, transactional process. This article focuses on the ways in which quantitative and qualitative methodologies can be combined to enrich developmental science and the study of human development, focusing on the practical questions of "when" and "how." Research situations that may be especially suited to mixing qualitative and quantitative approaches are described. The authors also discuss potential choices for using mixed quantitative- qualitative approaches in study design, sampling, construction of measures or interview protocols, collaborations, and data analysis relevant to developmental science. Finally, they discuss some common pitfalls that occur in mixing these methods and include suggestions for surmounting them.

Improving mixing efficiency of a polymer micromixer by use of a plastic shim divider

NASA Astrophysics Data System (ADS)

Li, Lei; Lee, L. James; Castro, Jose M.; Yi, Allen Y.

2010-03-01

In this paper, a critical modification to a polymer based affordable split-and-recombination static micromixer is described. To evaluate the improvement, both the original and the modified design were carefully investigated using an experimental setup and numerical modeling approach. The structure of the micromixer was designed to take advantage of the process capabilities of both ultraprecision micromachining and microinjection molding process. Specifically, the original and the modified design were numerically simulated using commercial finite element method software ANSYS CFX to assist the re-designing of the micromixers. The simulation results have shown that both designs are capable of performing mixing while the modified design has a much improved performance. Mixing experiments with two different fluids were carried out using the original and the modified mixers again showed a significantly improved mixing uniformity by the latter. The measured mixing coefficient for the original design was 0.11, and for the improved design it was 0.065. The developed manufacturing process based on ultraprecision machining and microinjection molding processes for device fabrication has the advantage of high-dimensional precision, low cost and manufacturing flexibility.

HEPA filter dissolution process

DOEpatents

Brewer, K.N.; Murphy, J.A.

1994-02-22

A process is described for dissolution of spent high efficiency particulate air (HEPA) filters and then combining the complexed filter solution with other radioactive wastes prior to calcining the mixed and blended waste feed. The process is an alternate to a prior method of acid leaching the spent filters which is an inefficient method of treating spent HEPA filters for disposal. 4 figures.

Hot recycling of asphaltic concrete pavement : IR-15-3(8)121, Wildcat to Pine Creek

DOT National Transportation Integrated Search

1981-02-01

There are various methods of pavement material recycling. This report is devoted to hot-mix plant recycling considerations and procedures. The several phases of the hot-mix recycling process are discussed separately, including removal and size reduct...

Method and apparatus for energy efficient self-aeration in chemical, biochemical, and wastewater treatment processes

DOEpatents

Gao, Johnway [Richland, WA; Skeen, Rodney S [Pendleton, OR

2002-05-28

The present invention is a pulse spilling self-aerator (PSSA) that has the potential to greatly lower the installation, operation, and maintenance cost associated with aerating and mixing aqueous solutions. Currently, large quantities of low-pressure air are required in aeration systems to support many biochemical production processes and wastewater treatment plants. Oxygen is traditionally supplied and mixed by a compressor or blower and a mechanical agitator. These systems have high-energy requirements and high installation and maintenance costs. The PSSA provides a mixing and aeration capability that can increase operational efficiency and reduce overall cost.

Sorting it out: bedding particle size and nesting material processing method affect nest complexity.

PubMed

Robinson-Junker, Amy; Morin, Amelia; Pritchett-Corning, Kathleen; Gaskill, Brianna N

2017-04-01

As part of routine husbandry, an increasing number of laboratory mice receive nesting material in addition to standard bedding material in their cages. Nesting material improves health outcomes and physiological performance in mice that receive it. Providing usable nesting material uniformly and efficiently to various strains of mice remains a challenge. The aim of this study was to determine how bedding particle size, method of nesting material delivery, and processing of the nesting material before delivery affected nest building in mice of strong (BALB/cAnNCrl) and weak (C3H/HeNCrl) gathering abilities. Our data suggest that processing nesting material through a grinder in conjunction with bedding material, although convenient for provision of bedding with nesting material 'built-in', negatively affects the integrity of the nesting material and subsequent nest-building outcomes. We also found that C3H mice, previously thought to be poor nest builders, built similarly scored nests to those of BALB/c mice when provided with unprocessed nesting material. This was true even when nesting material was mixed into the bedding substrate. We also observed that when nesting material was mixed into the bedding substrate, mice of both strains would sort their bedding by particle size more often than if it were not mixed in. Our findings support the utility of the practice of distributing nesting material mixed in with bedding substrate, but not that of processing the nesting material with the bedding in order to mix them.

Device for staged carbon monoxide oxidation

DOEpatents

Vanderborgh, Nicholas E.; Nguyen, Trung V.; Guante, Jr., Joseph

1993-01-01

A method and apparatus for selectively oxidizing carbon monoxide in a hydrogen rich feed stream. The method comprises mixing a feed stream consisting essentially of hydrogen, carbon dioxide, water and carbon monoxide with a first predetermined quantity of oxygen (air). The temperature of the mixed feed/oxygen stream is adjusted in a first the heat exchanger assembly (20) to a first temperature. The mixed feed/oxygen stream is sent to reaction chambers (30,32) having an oxidation catalyst contained therein. The carbon monoxide of the feed stream preferentially absorbs on the catalyst at the first temperature to react with the oxygen in the chambers (30,32) with minimal simultaneous reaction of the hydrogen to form an intermediate hydrogen rich process stream having a lower carbon monoxide content than the feed stream. The elevated outlet temperature of the process stream is carefully controlled in a second heat exchanger assembly (42) to a second temperature above the first temperature. The process stream is then mixed with a second predetermined quantity of oxygen (air). The carbon monoxide of the process stream preferentially reacts with the second quantity of oxygen in a second stage reaction chamber (56) with minimal simultaneous reaction of the hydrogen in the process stream. The reaction produces a hydrogen rich product stream having a lower carbon monoxide content than the process stream. The product stream is then cooled in a third heat exchanger assembly (72) to a third predetermined temperature. Three or more stages may be desirable, each with metered oxygen injection.

Implementation of an optimized microfluidic mixer in alumina employing femtosecond laser ablation

NASA Astrophysics Data System (ADS)

Juodėnas, M.; Tamulevičius, T.; Ulčinas, O.; Tamulevičius, S.

2018-01-01

Manipulation of liquids at the lowest levels of volume and dimension is at the forefront of materials science, chemistry and medicine, offering important time and resource saving applications. However, manipulation by mixing is troublesome at the microliter and lower scales. One approach to overcome this problem is to use passive mixers, which exploit structural obstacles within microfluidic channels or the geometry of channels themselves to enforce and enhance fluid mixing. Some applications require the manipulation and mixing of aggressive substances, which makes conventional microfluidic materials, along with their fabrication methods, inappropriate. In this work, implementation of an optimized full scale three port microfluidic mixer is presented in a slide of a material that is very hard to process but possesses extreme chemical and physical resistance—alumina. The viability of the selected femtosecond laser fabrication method as an alternative to conventional lithography methods, which are unable to process this material, is demonstrated. For the validation and optimization of the microfluidic mixer, a finite element method (FEM) based numerical modeling of the influence of the mixer geometry on its mixing performance is completed. Experimental investigation of the laminar flow geometry demonstrated very good agreement with the numerical simulation results. Such a laser ablation microfabricated passive mixer structure is intended for use in a capillary force assisted nanoparticle assembly setup (CAPA).

Using a mixed-methods design to examine nurse practitioner integration in British Columbia.

PubMed

Sangster-Gormley, Esther; Griffith, Janessa; Schreiber, Rita; Borycki, Elizabeth

2015-07-01

To discuss and provide examples of how mixed-methods research was used to evaluate the integration of nurse practitioners (NPs) into a Canadian province. Legislation enabling NPs to practise in British Columbia (BC) was enacted in 2005. This research evaluated the integration of NPs and their effect on the BC healthcare system. Data were collected using surveys, focus groups, participant interviews and case studies over three years. Data sources and methods were triangulated to determine how the findings addressed the research questions. The challenges and benefits of using the multiphase design are highlighted in the paper. The multiphase mixed-methods research design was selected because of its applicability to evaluation research. The design proved to be robust and flexible in answering research questions. As sub-studies within the multiphase design are often published separately, it can be difficult for researchers to find examples. This paper highlights ways that a multiphase mixed-methods design can be conducted for researchers unfamiliar with the process.

A Novel Approach to Enhance the Mechanical Strength and Electrical and Thermal Conductivity of Cu-GNP Nanocomposites

NASA Astrophysics Data System (ADS)

Saboori, Abdollah; Pavese, Matteo; Badini, Claudio; Fino, Paolo

2018-01-01

Copper/graphene nanoplatelet (GNP) nanocomposites were produced by a wet mixing method followed by a classical powder metallurgy technique. A qualitative evaluation of the structure of graphene after mixing indicated that wet mixing is an appropriate dispersion method. Thereafter, the effects of two post-processing techniques such as repressing-annealing and hot isostatic pressing (HIP) on density, interfacial bonding, hardness, and thermal and electrical conductivity of the nanocomposites were analyzed. Density evaluations showed that the relative density of specimens increased after the post-processing steps so that after HIPing almost full densification was achieved. The Vickers hardness of specimens increased considerably after the post-processing techniques. The thermal conductivity of pure copper was very low in the case of the as-sintered samples containing 2 to 3 pct porosity and increased considerably to a maximum value in the case of HIPed samples which contained only 0.1 to 0.2 pct porosity. Electrical conductivity measurements showed that by increasing the graphene content electrical conductivity decreased.

Synthesis and characterization of Al & SiCp nano particles by non-contact ultrasonic assisted method

NASA Astrophysics Data System (ADS)

Swain, Pradyut Kumar; Das, Ratnakar; Sahoo, Ashok Kumar; Naik, Bikash; Padhi, Payodhar

2018-05-01

The present study deals with proper mixing of SiCp nano particle in the aluminum metal matrix in two stages of processing i.e. primary and secondary. During primary processing, the breaking of agglomeration of nano particles take place and these are mixed with liquid aluminum powder using high frequency(35kHz) mechanical vibration. But, during secondary processing, mixing of nano particles along with subsequent cooling take place using high frequency non contact ultrasonic method. The study also reveals that in the liquid metal nano particle were uniformly dispersed and the segregation of the particles near the grain boundaries is due to pushing of the nano particle during grain growth. The study was performed by taking aluminum as matrix and SiCp as reinforcement with weight fraction of 2% and 3% and SiCp particles sizes of 30nm each. Scanning electron microscopy(SEM) and X-ray diffraction(XRD) were conducted for characterization of nano composite material.

Partially linear mixed-effects joint models for skewed and missing longitudinal competing risks outcomes.

PubMed

Lu, Tao; Lu, Minggen; Wang, Min; Zhang, Jun; Dong, Guang-Hui; Xu, Yong

2017-12-18

Longitudinal competing risks data frequently arise in clinical studies. Skewness and missingness are commonly observed for these data in practice. However, most joint models do not account for these data features. In this article, we propose partially linear mixed-effects joint models to analyze skew longitudinal competing risks data with missingness. In particular, to account for skewness, we replace the commonly assumed symmetric distributions by asymmetric distribution for model errors. To deal with missingness, we employ an informative missing data model. The joint models that couple the partially linear mixed-effects model for the longitudinal process, the cause-specific proportional hazard model for competing risks process and missing data process are developed. To estimate the parameters in the joint models, we propose a fully Bayesian approach based on the joint likelihood. To illustrate the proposed model and method, we implement them to an AIDS clinical study. Some interesting findings are reported. We also conduct simulation studies to validate the proposed method.

Parameterizing correlations between hydrometeor species in mixed-phase Arctic clouds

NASA Astrophysics Data System (ADS)

Larson, Vincent E.; Nielsen, Brandon J.; Fan, Jiwen; Ovchinnikov, Mikhail

2011-01-01

Mixed-phase Arctic clouds, like other clouds, contain small-scale variability in hydrometeor fields, such as cloud water or snow mixing ratio. This variability may be worth parameterizing in coarse-resolution numerical models. In particular, for modeling multispecies processes such as accretion and aggregation, it would be useful to parameterize subgrid correlations among hydrometeor species. However, one difficulty is that there exist many hydrometeor species and many microphysical processes, leading to complexity and computational expense. Existing lower and upper bounds on linear correlation coefficients are too loose to serve directly as a method to predict subgrid correlations. Therefore, this paper proposes an alternative method that begins with the spherical parameterization framework of Pinheiro and Bates (1996), which expresses the correlation matrix in terms of its Cholesky factorization. The values of the elements of the Cholesky matrix are populated here using a "cSigma" parameterization that we introduce based on the aforementioned bounds on correlations. The method has three advantages: (1) the computational expense is tolerable; (2) the correlations are, by construction, guaranteed to be consistent with each other; and (3) the methodology is fairly general and hence may be applicable to other problems. The method is tested noninteractively using simulations of three Arctic mixed-phase cloud cases from two field experiments: the Indirect and Semi-Direct Aerosol Campaign and the Mixed-Phase Arctic Cloud Experiment. Benchmark simulations are performed using a large-eddy simulation (LES) model that includes a bin microphysical scheme. The correlations estimated by the new method satisfactorily approximate the correlations produced by the LES.

Single-step preparation and deagglomeration of itraconazole microflakes by supercritical antisolvent method for dissolution enhancement.

PubMed

Sathigari, Sateesh Kumar; Ober, Courtney A; Sanganwar, Ganesh P; Gupta, Ram B; Babu, R Jayachandra

2011-07-01

Itraconazole (ITZ) microflakes were produced by supercritical antisolvent (SAS) method and simultaneously mixed with pharmaceutical excipients in a single step to prevent drug agglomeration. Simultaneous ITZ particle formation and mixing with fast-flo lactose (FFL) was performed in a high-pressure stirred vessel at 116 bar and 40 °C by the SAS-drug excipient mixing (SAS-DEM) method. The effects of stabilizers, such as sodium dodecyl sulfate and poloxamer 407 (PLX), on particle formation and drug dissolution were studied. Drug-excipient formulations were characterized for surface morphology, crystallinity, drug-excipient interactions, drug content uniformity, and drug dissolution rate. Mixture of drug microflakes and FFL formed by the SAS-DEM process shows that the process was successful in overcoming drug-drug agglomeration. PLX produced crystalline drug flakes in loose agglomerates with superior dissolution and flow properties even at higher drug loadings. Characterization studies confirmed the crystallinity of the drug and absence of chemical interactions during the SAS process. The dissolution of ITZ was substantially higher due to SAS and SAS-DEM processes; this improvement can be attributed to the microflake particle structures, effective deagglomeration, and wetting of the drug flakes with the excipients. Copyright © 2011 Wiley-Liss, Inc. and the American Pharmacists Association

Parameterizing correlations between hydrometeor species in mixed-phase Arctic clouds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Larson, Vincent E.; Nielsen, Brandon J.; Fan, Jiwen

2011-08-16

Mixed-phase Arctic clouds, like other clouds, contain small-scale variability in hydrometeor fields, such as cloud water or snow mixing ratio. This variability may be worth parameterizing in coarse-resolution numerical models. In particular, for modeling processes such as accretion and aggregation, it would be useful to parameterize subgrid correlations among hydrometeor species. However, one difficulty is that there exist many hydrometeor species and many microphysical processes, leading to complexity and computational expense.Existing lower and upper bounds (inequalities) on linear correlation coefficients provide useful guidance, but these bounds are too loose to serve directly as a method to predict subgrid correlations. Therefore,more » this paper proposes an alternative method that is based on a blend of theory and empiricism. The method begins with the spherical parameterization framework of Pinheiro and Bates (1996), which expresses the correlation matrix in terms of its Cholesky factorization. The values of the elements of the Cholesky matrix are parameterized here using a cosine row-wise formula that is inspired by the aforementioned bounds on correlations. The method has three advantages: 1) the computational expense is tolerable; 2) the correlations are, by construction, guaranteed to be consistent with each other; and 3) the methodology is fairly general and hence may be applicable to other problems. The method is tested non-interactively using simulations of three Arctic mixed-phase cloud cases from two different field experiments: the Indirect and Semi-Direct Aerosol Campaign (ISDAC) and the Mixed-Phase Arctic Cloud Experiment (M-PACE). Benchmark simulations are performed using a large-eddy simulation (LES) model that includes a bin microphysical scheme. The correlations estimated by the new method satisfactorily approximate the correlations produced by the LES.« less

Formulation characteristics and in vitro release testing of cyclosporine ophthalmic ointments.

PubMed

Dong, Yixuan; Qu, Haiou; Pavurala, Naresh; Wang, Jiang; Sekar, Vasanthakumar; Martinez, Marilyn N; Fahmy, Raafat; Ashraf, Muhammad; Cruz, Celia N; Xu, Xiaoming

2018-06-10

The aim of the present study was to investigate the relationship between formulation/process variables versus the critical quality attributes (CQAs) of cyclosporine ophthalmic ointments and to explore the feasibility of using an in vitro approach to assess product sameness. A definitive screening design (DSD) was used to evaluate the impact of formulation and process variables. The formulation variables included drug percentage, percentage of corn oil and lanolin alcohol. The process variables studied were mixing temperature, mixing time and the method of mixing. The quality and performance attributes examined included drug assay, content uniformity, image analysis, rheology (storage modulus, shear viscosity) and in vitro drug release. Of the formulation variables evaluated, the percentage of the drug substance and the percentage of corn oil in the matrix were the most influential factors with respect to in vitro drug release. Conversely, the process parameters tested were observed to have minimal impact. An evaluation of the release mechanism of cyclosporine from the ointment revealed an interplay between formulation (e.g. physicochemical properties of the drug and ointment matrix type) and the release medium. These data provide a scientific basis to guide method development for in vitro drug release testing of ointment dosage forms. These results demonstrate that the in vitro methods used in this investigation were fit-for-purpose for detecting formulation and process changes and therefore amenable to assessment of product sameness. Published by Elsevier B.V.

Domain Immersion Technique And Free Surface Computations Applied To Extrusion And Mixing Processes

NASA Astrophysics Data System (ADS)

Valette, Rudy; Vergnes, Bruno; Basset, Olivier; Coupez, Thierry

2007-04-01

This work focuses on the development of numerical techniques devoted to the simulation of mixing processes of complex fluids such as twin-screw extrusion or batch mixing. In mixing process simulation, the absence of symmetry of the moving boundaries (the screws or the rotors) implies that their rigid body motion has to be taken into account by using a special treatment. We therefore use a mesh immersion technique (MIT), which consists in using a P1+/P1-based (MINI-element) mixed finite element method for solving the velocity-pressure problem and then solving the problem in the whole barrel cavity by imposing a rigid motion (rotation) to nodes found located inside the so called immersed domain, each subdomain (screw, rotor) being represented by a surface CAD mesh (or its mathematical equation in simple cases). The independent meshes are immersed into a unique backgound computational mesh by computing the distance function to their boundaries. Intersections of meshes are accounted for, allowing to compute a fill factor usable as for the VOF methodology. This technique, combined with the use of parallel computing, allows to compute the time-dependent flow of generalized Newtonian fluids including yield stress fluids in a complex system such as a twin screw extruder, including moving free surfaces, which are treated by a "level set" and Hamilton-Jacobi method.

Use of high-volume reclaimed asphalt pavement for asphalt pavement rehabilitation due to increasing highway truck traffic from freight transportation.

DOT National Transportation Integrated Search

2012-06-01

The objective of this research was to examine the effects that different methods of RAP stockpile fractionation had on : the volumetric mix design properties for high-RAP content surface mixes. The processing of RAP materials resulted in : the degrad...

Measuring Down: Evaluating Digital Storytelling as a Process for Narrative Health Promotion.

PubMed

Gubrium, Aline C; Fiddian-Green, Alice; Lowe, Sarah; DiFulvio, Gloria; Del Toro-Mejías, Lizbeth

2016-05-15

Digital storytelling (DST) engages participants in a group-based process to create and share narrative accounts of life events. We present key evaluation findings of a 2-year, mixed-methods study that focused on effects of participating in the DST process on young Puerto Rican Latina's self-esteem, social support, empowerment, and sexual attitudes and behaviors. Quantitative results did not show significant changes in the expected outcomes. However, in our qualitative findings we identified several ways in which the DST made positive, health-bearing effects. We argue for the importance of "measuring down" to reflect the locally grounded, felt experiences of participants who engage in the process, as current quantitative scales do not "measure up" to accurately capture these effects. We end by suggesting the need to develop mixed-methods, culturally relevant, and sensitive evaluation tools that prioritize process effects as they inform intervention and health promotion. © The Author(s) 2016.

Computing pKa Values with a Mixing Hamiltonian Quantum Mechanical/Molecular Mechanical Approach.

PubMed

Liu, Yang; Fan, Xiaoli; Jin, Yingdi; Hu, Xiangqian; Hu, Hao

2013-09-10

Accurate computation of the pKa value of a compound in solution is important but challenging. Here, a new mixing quantum mechanical/molecular mechanical (QM/MM) Hamiltonian method is developed to simulate the free-energy change associated with the protonation/deprotonation processes in solution. The mixing Hamiltonian method is designed for efficient quantum mechanical free-energy simulations by alchemically varying the nuclear potential, i.e., the nuclear charge of the transforming nucleus. In pKa calculation, the charge on the proton is varied in fraction between 0 and 1, corresponding to the fully deprotonated and protonated states, respectively. Inspired by the mixing potential QM/MM free energy simulation method developed previously [H. Hu and W. T. Yang, J. Chem. Phys. 2005, 123, 041102], this method succeeds many advantages of a large class of λ-coupled free-energy simulation methods and the linear combination of atomic potential approach. Theory and technique details of this method, along with the calculation results of the pKa of methanol and methanethiol molecules in aqueous solution, are reported. The results show satisfactory agreement with the experimental data.

Cultural and Linguistic Adaptation of a Healthy Diet Text Message Intervention for Hispanic Adults

PubMed Central

Cameron, Linda D.; Durazo, Arturo; Ramirez, A. Susana; Corona, Roberto; Ultreras, Mayra; Piva, Sonia

2017-01-01

Hispanics represent a critical target for culturally-adapted diet interventions. In this formative research, we translated HealthyYouTXT, an mHealth program developed by the U.S. National Cancer Institute, into HealthyYouTXT en Español, a linguistically and culturally appropriate version for Spanish speakers. We report a three-stage, mixed-methods process through which we culturally adapted the text messages, evaluated their acceptability, and revised the program based on the findings. In Stage 1, we conducted initial translations and adaptations of the text libraries using an iterative, principle-guided process. In Stage 2, we used mixed methods including focus groups and surveys with 109 Hispanic adults to evaluate the acceptability and cultural appropriateness of the program. Further, we used survey data to evaluate whether Self-Determination Theory factors (used to develop HealthyYouTXT) of autonomous motivation, controlled motivation, and amotivation and Hispanic cultural beliefs about familism, fatalism, and destiny predict program interest and its perceived efficacy. Mixed-methods analyses revealed substantial interest in HealthyYouTXT, with most participants expressing substantial interest in using it and viewing it as highly efficacious. Both cultural beliefs (i.e., beliefs in destiny and, for men, high familism) and SDT motivations (i.e., autonomy) predicted HealthyYouTXT evaluations, suggesting utility in emphasizing them in messages. Higher destiny beliefs predicted lower interest and perceived efficacy, suggesting they could impede program use. In Stage 3, we implemented the mixed-methods findings to generate a revised HealthyYouTXT en Español. The emergent linguistic principles and multi-stage, multi-methods process can be applied beneficially in health communication adaptations. PMID:28248628

Electromagnetic mixed waste processing system for asbestos decontamination

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasevich, R.S.; Vaux, W.; Ulerich, N.

The overall objective of this three-phase program is to develop an integrated process for treating asbestos-containing material that is contaminated with radioactive and hazardous constituents. The integrated process will attempt to minimize processing and disposal costs. The objectives of Phase 1 were to establish the technical feasibility of asbestos decomposition, inorganic radionuclide nd heavy metal removal, and organic volatilization. Phase 1 resulted in the successful bench-scale demonstration of the elements required to develop a mixed waste treatment process for asbestos-containing material (ACM) contaminated with radioactive metals, heavy metals, and organics. Using the Phase 1 data, a conceptual process was developed.more » The Phase 2 program, currently in progress, is developing an integrated system design for ACM waste processing. The Phase 3 program will target demonstration of the mixed waste processing system at a DOE facility. The electromagnetic mixed waste processing system employs patented technologies to convert DOE asbestos to a non-hazardous, radionuclide-free, stable waste. The dry, contaminated asbestos is initially heated with radiofrequency energy to remove organic volatiles. Second,the radionuclides are removed by solvent extraction coupled with ion exchange solution treatment. Third, the ABCOV method converts the asbestos to an amorphous silica suspension at low temperature (100{degrees}C). Finally the amorphous silica is solidified for disposal.« less

How far is mixed methods research in the field of health policy and systems in Africa? A scoping review.

PubMed

De Allegri, M; Sieleunou, I; Abiiro, G A; Ridde, V

2018-04-01

Both the academic and the policy community are calling for wider application of mixed methods research, suggesting that combined use of quantitative and qualitative methods is most suitable to assess and understand the complexities of health interventions. In spite of recent growth in mixed methods studies, limited efforts have been directed towards appraising and synthetizing to what extent and how mixed methods have been applied specifically to Health Policy and Systems Research (HPSR) in low- and middle-income countries (LMICs). We aimed at filling this gap in knowledge, by exploring the scope and quality of mixed methods research in the African context. We conducted a scoping review applying the framework developed by Arksey and O'Malley and modified by Levac et al. to identify and extract data from relevant studies published between 1950 and 2013. We limited our search to peer-reviewed HPSR publications in English, which combined at least one qualitative and one quantitative method and focused on Africa. Among the 105 studies that were retained for data extraction, over 60% were published after 2010. Nearly 50% of all studies addressed topics relevant to Health Systems, while Health Policy and Health Outcomes studies accounted respectively for 40% and 10% of all publications. The quality of the application of mixed methods varied greatly across studies, with a relatively small proportion of studies stating clearly defined research questions and differentiating quantitative and qualitative elements, including sample sizes and analytical approaches. The methodological weaknesses observed could be linked to the paucity of specific training opportunities available to people interested in applying mixed methods to HPSR in LMICs as well as to the limitations on word limit, scope and peer-review processes at the journals levels. Increasing training opportunities and enhancing journal flexibility may result in more and better quality mixed methods publications.

Sol-gel processing with inorganic metal salt precursors

DOEpatents

Hu, Zhong-Cheng

2004-10-19

Methods for sol-gel processing that generally involve mixing together an inorganic metal salt, water, and a water miscible alcohol or other organic solvent, at room temperature with a macromolecular dispersant material, such as hydroxypropyl cellulose (HPC) added. The resulting homogenous solution is incubated at a desired temperature and time to result in a desired product. The methods enable production of high quality sols and gels at lower temperatures than standard methods. The methods enable production of nanosize sols from inorganic metal salts. The methods offer sol-gel processing from inorganic metal salts.

Process Evaluation of a Parenting Program for Low-Income Families in South Africa

ERIC Educational Resources Information Center

Lachman, Jamie M.; Kelly, Jane; Cluver, Lucie; Ward, Catherine L.; Hutchings, Judy; Gardner, Frances

2018-01-01

Objective: This mixed-methods process evaluation examined the feasibility of a parenting program delivered by community facilitators to reduce the risk of child maltreatment in low-income families with children aged 3-8 years in Cape Town, South Africa (N = 68). Method: Quantitative measures included attendance registers, fidelity checklists,…

GoActive: a protocol for the mixed methods process evaluation of a school-based physical activity promotion programme for 13-14year old adolescents.

PubMed

Jong, Stephanie T; Brown, Helen Elizabeth; Croxson, Caroline H D; Wilkinson, Paul; Corder, Kirsten L; van Sluijs, Esther M F

2018-05-21

Process evaluations are critical for interpreting and understanding outcome trial results. By understanding how interventions function across different settings, process evaluations have the capacity to inform future dissemination of interventions. The complexity of Get others Active (GoActive), a 12-week, school-based physical activity intervention implemented in eight schools, highlights the need to investigate how implementation is achieved across a variety of school settings. This paper describes the mixed methods GoActive process evaluation protocol that is embedded within the outcome evaluation. In this detailed process evaluation protocol, we describe the flexible and pragmatic methods that will be used for capturing the process evaluation data. A mixed methods design will be used for the process evaluation, including quantitative data collected in both the control and intervention arms of the GoActive trial, and qualitative data collected in the intervention arm. Data collection methods will include purposively sampled, semi-structured interviews and focus group interviews, direct observation, and participant questionnaires (completed by students, teachers, older adolescent mentors, and local authority-funded facilitators). Data will be analysed thematically within and across datasets. Overall synthesis of findings will address the process of GoActive implementation, and through which this process affects outcomes, with careful attention to the context of the school environment. This process evaluation will explore the experience of participating in GoActive from the perspectives of key groups, providing a greater understanding of the acceptability and process of implementation of the intervention across the eight intervention schools. This will allow for appraisal of the intervention's conceptual base, inform potential dissemination, and help optimise post-trial sustainability. The process evaluation will also assist in contextualising the trial effectiveness results with respect to how the intervention may or may not have worked and, if it was found to be effective, what might be required for it to be sustained in the 'real world'. Furthermore, it will offer suggestions for the development and implementation of future initiatives to promote physical activity within schools. ISRCTN, ISRCTN31583496 . Registered on 18 February 2014.

Turbulent mixing and removal of ozone within an Amazon rainforest canopy

NASA Astrophysics Data System (ADS)

Freire, L. S.; Gerken, T.; Ruiz-Plancarte, J.; Wei, D.; Fuentes, J. D.; Katul, G. G.; Dias, N. L.; Acevedo, O. C.; Chamecki, M.

2017-03-01

Simultaneous profiles of turbulence statistics and mean ozone mixing ratio are used to establish a relation between eddy diffusivity and ozone mixing within the Amazon forest. A one-dimensional diffusion model is proposed and used to infer mixing time scales from the eddy diffusivity profiles. Data and model results indicate that during daytime conditions, the upper (lower) half of the canopy is well (partially) mixed most of the time and that most of the vertical extent of the forest can be mixed in less than an hour. During nighttime, most of the canopy is predominantly poorly mixed, except for periods with bursts of intermittent turbulence. Even though turbulence is faster than chemistry during daytime, both processes have comparable time scales in the lower canopy layers during nighttime conditions. Nonchemical loss time scales (associated with stomatal uptake and dry deposition) for the entire forest are comparable to turbulent mixing time scale in the lower canopy during the day and in the entire canopy during the night, indicating a tight coupling between turbulent transport and dry deposition and stomatal uptake processes. Because of the significant time of day and height variability of the turbulent mixing time scale inside the canopy, it is important to take it into account when studying chemical and biophysical processes happening in the forest environment. The method proposed here to estimate turbulent mixing time scales is a reliable alternative to currently used models, especially for situations in which the vertical distribution of the time scale is relevant.

Rapid gas hydrate formation process

DOEpatents

Brown, Thomas D.; Taylor, Charles E.; Unione, Alfred J.

2013-01-15

The disclosure provides a method and apparatus for forming gas hydrates from a two-phase mixture of water and a hydrate forming gas. The two-phase mixture is created in a mixing zone which may be wholly included within the body of a spray nozzle. The two-phase mixture is subsequently sprayed into a reaction zone, where the reaction zone is under pressure and temperature conditions suitable for formation of the gas hydrate. The reaction zone pressure is less than the mixing zone pressure so that expansion of the hydrate-forming gas in the mixture provides a degree of cooling by the Joule-Thompson effect and provides more intimate mixing between the water and the hydrate-forming gas. The result of the process is the formation of gas hydrates continuously and with a greatly reduced induction time. An apparatus for conduct of the method is further provided.

Mixed Methods Research With Internally Displaced Colombian Gay and Bisexual Men and Transwomen

PubMed Central

Zea, Maria Cecilia; Aguilar-Pardo, Marcela; Betancourt, Fabian; Reisen, Carol A.; Gonzales, Felisa

2014-01-01

We discuss the use of mixed methods research to further understanding of displaced Colombian gay and bisexual men and transwomen, a marginalized population at risk. Within the framework of communicative action, which calls for social change through egalitarian dialog, we describe how our multinational, interdisciplinary research team explored the subjective, objective, and social worlds of participants through life history interviews and surveys. We also describe the unique Colombian context, conscious efforts to establish egalitarian relationships among research team members, and efforts to disseminate and reflect on findings. Through discussion of our research process and results, we aim to demonstrate how mixed methods research can be utilized to facilitate noncoercive discourse and contribute to social change. PMID:24926225

A PC-based inverse design method for radial and mixed flow turbomachinery

NASA Technical Reports Server (NTRS)

Skoe, Ivar Helge

1991-01-01

An Inverse Design Method suitable for radial and mixed flow turbomachinery is presented. The codes are based on the streamline curvature concept; therefore, it is applicable for current personal computers from the 286/287 range. In addition to the imposed aerodynamic constraints, mechanical constraints are imposed during the design process to ensure that the resulting geometry satisfies production consideration and that structural considerations are taken into account. By the use of Bezier Curves in the geometric modeling, the same subroutine is used to prepare input for both aero and structural files since it is important to ensure that the geometric data is identical to both structural analysis and production. To illustrate the method, a mixed flow turbine design is shown.

Mathematical model and metaheuristics for simultaneous balancing and sequencing of a robotic mixed-model assembly line

NASA Astrophysics Data System (ADS)

Li, Zixiang; Janardhanan, Mukund Nilakantan; Tang, Qiuhua; Nielsen, Peter

2018-05-01

This article presents the first method to simultaneously balance and sequence robotic mixed-model assembly lines (RMALB/S), which involves three sub-problems: task assignment, model sequencing and robot allocation. A new mixed-integer programming model is developed to minimize makespan and, using CPLEX solver, small-size problems are solved for optimality. Two metaheuristics, the restarted simulated annealing algorithm and co-evolutionary algorithm, are developed and improved to address this NP-hard problem. The restarted simulated annealing method replaces the current temperature with a new temperature to restart the search process. The co-evolutionary method uses a restart mechanism to generate a new population by modifying several vectors simultaneously. The proposed algorithms are tested on a set of benchmark problems and compared with five other high-performing metaheuristics. The proposed algorithms outperform their original editions and the benchmarked methods. The proposed algorithms are able to solve the balancing and sequencing problem of a robotic mixed-model assembly line effectively and efficiently.

Simulation of mixing in the quick quench region of a rich burn-quick quench mix-lean burn combustor

NASA Technical Reports Server (NTRS)

Shih, Tom I.-P.; Nguyen, H. Lee; Howe, Gregory W.; Li, Z.

1991-01-01

A computer program was developed to study the mixing process in the quick quench region of a rich burn-quick quench mix-lean burn combustor. The computer program developed was based on the density-weighted, ensemble-averaged conservation equations of mass, momentum (full compressible Navier-Stokes), total energy, and species, closed by a k-epsilon turbulence model with wall functions. The combustion process was modeled by a two-step global reaction mechanism, and NO(x) formation was modeled by the Zeldovich mechanism. The formulation employed in the computer program and the essence of the numerical method of solution are described. Some results obtained for nonreacting and reacting flows with different main-flow to dilution-jet momentum flux ratios are also presented.

Effect of water volume based on water absorption and mixing time on physical properties of tapioca starch – wheat composite bread

NASA Astrophysics Data System (ADS)

Prameswari, I. K.; Manuhara, G. J.; Amanto, B. S.; Atmaka, W.

2018-05-01

Tapioca starch application in bread processing change water absorption level by the dough, while sufficient mixing time makes the optimal water absorption. This research aims to determine the effect of variations in water volume and mixing time on physical properties of tapioca starch – wheat composite bread and the best method for the composite bread processing. This research used Complete Randomized Factorial Design (CRFD) with two factors: variations of water volume (111,8 ml, 117,4 ml, 123 ml) and mixing time (16 minutes, 17 minutes 36 seconds, 19 minutes 12 seconds). The result showed that water volume significantly affected on dough volume, bread volume and specific volume, baking expansion, and crust thickness. Mixing time significantly affected on dough volume and specific volume, bread volume and specific volume, baking expansion, bread height, and crust thickness. While the combination of water volume and mixing time significantly affected for all physical properties parameters except crust thickness.

Effect of initial conditions on constant pressure mixing between two turbulent streams

NASA Astrophysics Data System (ADS)

Kangovi, S.

1983-02-01

It is pointed out that a study of the process of mixing between two dissimilar streams has varied applications in different fields. The applications include the design of an after burner in a high by-pass ratio aircraft engine and the disposal of effluents in a stream. The mixing process determines important quantities related to the energy transfer from main stream to the secondary stream, the temperature and velocity profiles, and the local kinematic and dissipative structure within the mixing region, and the growth of the mixing layer. Hill and Page (1968) have proposed the employment of an 'assumed epsilon' method in which the eddy viscosity model of Goertler (1942) is modified to account for the initial boundary layer. The present investigation is concerned with the application of the assumed epsilon technique to the study of the effect of initial conditions on the development of the turbulent mixing layer between two compressible, nonisoenergetic streams at constant pressure.

Impact of processing on odour-active compounds of a mixed tomato-onion puree.

PubMed

Koutidou, Maria; Grauwet, Tara; Van Loey, Ann; Acharya, Parag

2017-08-01

Gas chromatography-olfactometry revealed thirty-two odour-active compounds in a heat-processed tomato-onion puree, among which twenty-seven were identified by gas chromatography-olfactometry-mass spectrometry (GC-O-MS) and comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry (GC×GC-TOF MS). Based on the results of two olfactometric methods, i.e. detection frequency and aroma extract dilution analysis, the most potent aroma components include: dipropyl disulfide, S-propyl thioacetate, dimethyl trisulfide, 1-octen-3-one, methional, dipropyl trisulfide, 4,5-dimethylthiazole, 2-phenylacetaldehyde and sotolone. Processing of mixed vegetable systems can add complexity in their aroma profiles due to (bio)chemical interactions between the components. Therefore, the impact of different processing steps (i.e. thermal blanching, all-in-one and split-stream processes) on the volatile profile and aroma of a mixed tomato-onion puree has been investigated using a GC-MS fingerprinting approach. Results showed the potential to control the aroma in a mixed tomato-onion system through process-induced enzymatic modulations for producing tomato-onion food products with distinct aroma characteristics. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mechanical Properties Studies of Components Formulation for Mixing Process Contain of Polypropylene, Polyethylene, and Aluminium Powder

NASA Astrophysics Data System (ADS)

Hamsi, A.; Dinzi, R.

2017-03-01

Certain powder and others components can induce toxic reactions if not properly handled in the mixing stage. During handling, the small particles can become airborne and be trapped in the lungs, another concern is inhomogeneities in the mixing process. Uniform quantities of the particles of the components are needed in all portions of the mixture. This paper reports the results of mechanical properties studies of mixing three components formulation for mixing process. Contain of Polyethylene (PE), Polyprophylene (PP) and Aluminium Powder. Powder mixer, Autodesk mold flow and computer based on excell method was carried out to study the influence of each formulation component on the flow %, PE 20% and Aluminium powder 2%. Macroscopic optic and macro photo was carried out to identify the homogenity of mixing, tensile test for identify the strength of component after mixing. Finally the optimal tensile test with composition PP 785,PE 20% and Aluminium powder 2% at speed 52 rpm, temperature 1500C, the tensile strength 20,92 N/mm2. At temperature 1600C, speed 100 rpm the optimum tensile strength 17,91 N/mm2. The result of simulation autodesk mold flow adviser the filling time 6 seconds. Otherwise on manual hot hidraulic press the time of filling 10 seconds.

Adding Qualitative and Mixed Methods Research to Health Intervention Studies: Interacting With Differences.

PubMed

Johnson, R Burke; Schoonenboom, Judith

2016-04-01

The purpose of this article is to explain how to improve intervention designs, such as randomized controlled trials (RCTs), in health science research using a process philosophy and theory known as dialectical pluralism (DP). DP views reality as plural and uses dialectical, dialogical, and hermeneutical approaches to knowledge construction. Using DP and its "both/and" logic, and its attempt to produce new creative syntheses, researchers on heterogeneous teams can better dialogue with qualitative and mixed methods approaches, concepts, paradigms, methodologies, and methods to improve their intervention research studies. The concept of reflexivity is utilized but is expanded when it is a component of DP. Examples of strategies for identifying, inviting, and creating divergence and integrative strategies for producing strong mixed methods intervention studies are provided and illustrated using real-life examples. © The Author(s) 2015.

Mixed-Method Nursing Research: "A Public and Its Problems?" A Commentary on French Nursing Research.

PubMed

Dupin, Cécile Marie; Debout, Christophe; Rothan-Tondeur, Monique

2014-02-01

Nursing in France is undergoing a transition. In 2009, the preregistration nursing education program was reformed in line with the European Bologna Process, bringing nursing education to the universities. In 2010, the French Programme Hospitalier de Recherche Infirmière, the first national French nursing research funding program, was launched by the French Health Ministry. Of the 149 French research proposals submitted by registered nurses in 2010 and 2011, 13 were mixed-method proposals. The registered nurse principal investigator argued for a complementary use of qualitative and quantitative methods. These trends highlight major issues regarding mixed-method and nursing research. We can reasonably assume that mixed-method research has a broad appeal for nurse scholars, particularly for the exploration of complex phenomena related to nursing. Moreover, the recent movement in the domain of nursing education and research experienced in France highlights the need for dedicated research education in the development of nursing research capacity. © The Author(s) 2014 Reprints and permissions:]br]sagepub.co.uk/journalsPermissions.nav.

Qualitative Methods in Mental Health Services Research

PubMed Central

Palinkas, Lawrence A.

2014-01-01

Qualitative and mixed methods play a prominent role in mental health services research. However, the standards for their use are not always evident, especially for those not trained in such methods. This paper reviews the rationale and common approaches to using qualitative and mixed methods in mental health services and implementation research based on a review of the papers included in this special series along with representative examples from the literature. Qualitative methods are used to provide a “thick description” or depth of understanding to complement breadth of understanding afforded by quantitative methods, elicit the perspective of those being studied, explore issues that have not been well studied, develop conceptual theories or test hypotheses, or evaluate the process of a phenomenon or intervention. Qualitative methods adhere to many of the same principles of scientific rigor as quantitative methods, but often differ with respect to study design, data collection and data analysis strategies. For instance, participants for qualitative studies are usually sampled purposefully rather than at random and the design usually reflects an iterative process alternating between data collection and analysis. The most common techniques for data collection are individual semi-structured interviews, focus groups, document reviews, and participant observation. Strategies for analysis are usually inductive, based on principles of grounded theory or phenomenology. Qualitative methods are also used in combination with quantitative methods in mixed method designs for convergence, complementarity, expansion, development, and sampling. Rigorously applied qualitative methods offer great potential in contributing to the scientific foundation of mental health services research. PMID:25350675

Continuous Precipitation of Ceria Nanoparticles from a Continuous Flow Micromixer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tseng, Chih Heng; Paul, Brian; Chang, Chih-hung

2013-01-01

Cerium oxide nanoparticles were continuously precipitated from a solution of cerium(III) nitrate and ammonium hydroxide using a micro-scale T-mixer. Findings show that the method of mixing is important in the ceria precipitation process. In batch mixing and deposition, disintegration and agglomeration dominates the deposited film. In T-mixing and deposition, more uniform nanorod particles are attainable. In addition, it was found that the micromixing approach reduced the exposure of the Ce(OH)3 precipates to oxygen, yielding hydroxide precipates in place of CeO2 precipitates. Advantages of the micro-scale T-mixing approach include shorter mixing times, better control of nanoparticle shape and less agglomeration.

The application of mixed recommendation algorithm with user clustering in the microblog advertisements promotion

NASA Astrophysics Data System (ADS)

Gong, Lina; Xu, Tao; Zhang, Wei; Li, Xuhong; Wang, Xia; Pan, Wenwen

2017-03-01

The traditional microblog recommendation algorithm has the problems of low efficiency and modest effect in the era of big data. In the aim of solving these issues, this paper proposed a mixed recommendation algorithm with user clustering. This paper first introduced the situation of microblog marketing industry. Then, this paper elaborates the user interest modeling process and detailed advertisement recommendation methods. Finally, this paper compared the mixed recommendation algorithm with the traditional classification algorithm and mixed recommendation algorithm without user clustering. The results show that the mixed recommendation algorithm with user clustering has good accuracy and recall rate in the microblog advertisements promotion.

Application of the Fokker-Planck molecular mixing model to turbulent scalar mixing using moment methods

NASA Astrophysics Data System (ADS)

Madadi-Kandjani, E.; Fox, R. O.; Passalacqua, A.

2017-06-01

An extended quadrature method of moments using the β kernel density function (β -EQMOM) is used to approximate solutions to the evolution equation for univariate and bivariate composition probability distribution functions (PDFs) of a passive scalar for binary and ternary mixing. The key element of interest is the molecular mixing term, which is described using the Fokker-Planck (FP) molecular mixing model. The direct numerical simulations (DNSs) of Eswaran and Pope ["Direct numerical simulations of the turbulent mixing of a passive scalar," Phys. Fluids 31, 506 (1988)] and the amplitude mapping closure (AMC) of Pope ["Mapping closures for turbulent mixing and reaction," Theor. Comput. Fluid Dyn. 2, 255 (1991)] are taken as reference solutions to establish the accuracy of the FP model in the case of binary mixing. The DNSs of Juneja and Pope ["A DNS study of turbulent mixing of two passive scalars," Phys. Fluids 8, 2161 (1996)] are used to validate the results obtained for ternary mixing. Simulations are performed with both the conditional scalar dissipation rate (CSDR) proposed by Fox [Computational Methods for Turbulent Reacting Flows (Cambridge University Press, 2003)] and the CSDR from AMC, with the scalar dissipation rate provided as input and obtained from the DNS. Using scalar moments up to fourth order, the ability of the FP model to capture the evolution of the shape of the PDF, important in turbulent mixing problems, is demonstrated. Compared to the widely used assumed β -PDF model [S. S. Girimaji, "Assumed β-pdf model for turbulent mixing: Validation and extension to multiple scalar mixing," Combust. Sci. Technol. 78, 177 (1991)], the β -EQMOM solution to the FP model more accurately describes the initial mixing process with a relatively small increase in computational cost.

Preparation of Surlyn films reinforced with cellulose nanofibres and feasibility of applying the transparent composite films for organic photovoltaic encapsulation

PubMed Central

Lertngim, Anantaya; Phiriyawirut, Manisara; Yuwawech, Kitti; Sangkhun, Weradesh; Kumnorkaew, Pisist; Muangnapoh, Tanyakorn

2017-01-01

This research concerns the development of Surlyn film reinforced with micro-/nanofibrillated celluloses (MFC) for use as an encapsulant in organic photovoltaic (OPV) cells. The aim of this work was to investigate the effects of fibre types and the mixing methods on the structure–properties of the composite films. Three types of cellulose micro/nanofibrils were prepared: the as-received MFC, the dispersed MFC and the esterified MFC. The fibres were mixed with Surlyn via an extrusion process, using two different mixing methods. It was found that the extent of fibre disintegration and tensile modulus of the composite films prepared by the master-batching process was superior to that of the composite system prepared by the direct mixing method. Using the esterified MFC as a reinforcement, compatibility between polymer and the fibre increased, accompanied with the improvement of the percentage elongation of the Surlyn composite film. The percentage of light transmittance of the Surlyn/MFC films was above 88, regardless of the fibre types and fibre concentrations. The water vapour transmission rate of the Surlyn/esterified MFC film was 65% lower than that of the neat Surlyn film. This contributed to the longer lifetime of the OPV encapsulated with the Surlyn/esterified MFC film. PMID:29134083

Preparation of Surlyn films reinforced with cellulose nanofibres and feasibility of applying the transparent composite films for organic photovoltaic encapsulation

NASA Astrophysics Data System (ADS)

Lertngim, Anantaya; Phiriyawirut, Manisara; Wootthikanokkhan, Jatuphorn; Yuwawech, Kitti; Sangkhun, Weradesh; Kumnorkaew, Pisist; Muangnapoh, Tanyakorn

2017-10-01

This research concerns the development of Surlyn film reinforced with micro-/nanofibrillated celluloses (MFC) for use as an encapsulant in organic photovoltaic (OPV) cells. The aim of this work was to investigate the effects of fibre types and the mixing methods on the structure-properties of the composite films. Three types of cellulose micro/nanofibrils were prepared: the as-received MFC, the dispersed MFC and the esterified MFC. The fibres were mixed with Surlyn via an extrusion process, using two different mixing methods. It was found that the extent of fibre disintegration and tensile modulus of the composite films prepared by the master-batching process was superior to that of the composite system prepared by the direct mixing method. Using the esterified MFC as a reinforcement, compatibility between polymer and the fibre increased, accompanied with the improvement of the percentage elongation of the Surlyn composite film. The percentage of light transmittance of the Surlyn/MFC films was above 88, regardless of the fibre types and fibre concentrations. The water vapour transmission rate of the Surlyn/esterified MFC film was 65% lower than that of the neat Surlyn film. This contributed to the longer lifetime of the OPV encapsulated with the Surlyn/esterified MFC film.

Influence of ɣ and ultrasonic irradiations on the physicochemical properties of CeO2-Fe2O3-Al2O3 for textile dyes removal applications

NASA Astrophysics Data System (ADS)

Ibrahim, Marwa M.; El-Molla, Sahar A.; Ismail, Sahar A.

2018-04-01

In this study highly effective adsorbent ternary mixed oxide CeO2-Fe2O3-Al2O3 was prepared by precipitation method. Various methods used to treat the mixed hydroxide like calcination, ultrasonic, hydrothermal and ɣ radiation with different doses to obtain the ternary mixed oxide. XRD, TEM, EDX, FTIR and SBET are used to study the physicochemical properties of nanoparticles. The CFAH and CFAɣ0.8 have the different morphologies and high surface area. Batch adsorption experiments were performed to remove anionic Remazol Red RB-133 dye. The experimental data showed that The CFAH and CFAɣ0.8 have high adsorption rate for removing of dye. The removal of dye is enhanced by ultrasonic radiation and high temperature. The adsorption process was fitted well for pseudo second order kinetics and followed the Freundlich isotherm model. In addition to, Thermodynamic results of adsorption process displayed that, the adsorption of dye on adsorbent was spontaneous, endothermic and chemisorptions process.

An Exploration of Strategic Planning Perspectives and Processes within Community Colleges Identified as Being Distinctive in Their Strategic Planning Practices

ERIC Educational Resources Information Center

Augustyniak, Lisa J.

2015-01-01

Community college leaders face unprecedented change, and some have begun reexamining their institutional strategic planning processes. Yet, studies in higher education strategic planning spend little time examining how community colleges formulate their strategic plans. This mixed-method qualitative study used an expert sampling method to identify…

Secondary Schools Principals and Their Job Satisfaction: A Test of Process Theories

ERIC Educational Resources Information Center

Maforah, Tsholofelo Paulinah

2015-01-01

The study aims to test the validity of process theories on the job satisfaction of previously disadvantaged Secondary School principals in the North West province. A mixed-method approach consisting of both quantitative and qualitative methods was used for the study. A questionnaire was administered during the quantitative phase with a sample that…

Different Ways to Disagree: A Study of Organizational Dissent to Explore Connections between Mixed Methods Research and Engaged Scholarship

ERIC Educational Resources Information Center

Garner, Johny T.

2015-01-01

Organizational communication processes are complex, but all too often, researchers oversimplify the study of these processes by relying on a single method. Particularly when scholars and practitioners partner together to solve organizational problems, meaningful results require methodological flexibility and diversity. As an exemplar of the fit…

TREATMENT OF HEXAVALENT CHROMIUM IN CHROMITE ORE PROCESSING SOLID WASTE USING A MIXED REDUCTANT SOLUTION OF FERROUS SULFATE AND SODIUM DITHIONITE

EPA Science Inventory

We developed a method for disseminating ferrous iron in the subsurface to enhance chemical reduction of hexavalent chromium (Cr(VI)) in a chromite ore processing solid waste derived from the production of ferrochrome alloy. The method utilizes ferrous sulfate (FeSO4) in combinati...

Advances in chemical and physical properties of electric arc furnace carbon steel slag by hot stage processing and mineral mixing.

PubMed

Liapis, Ioannis; Papayianni, Ioanna

2015-01-01

Slags are recognised as a highly efficient, cost effective tool in the metal processing industry, by minimising heat losses, reducing metal oxidation through contact with air, removing metal impurities and protecting refractories and graphite electrodes. When compared to natural aggregates for use in the construction industry, slags have higher specific weight that acts as an economic deterrent. A method of altering the specific weight of EAFC slag by hot stage processing and mineral mixing, during steel production is presented in this article. The method has minimal interference with the production process of steel, even by limited additions of appropriate minerals at high temperatures. Five minerals are examined, namely perlite, ladle furnace slag, bauxite, diatomite and olivine. Measurements of specific weight are accompanied by X-ray diffraction (XRD) and fluorescence (XRF) analysis and scanning electron microscopy spectral images. It is also shown how altering the chemical composition is expected to affect the furnace refractory lining. Additionally, the process has been repeated for the most suitable mix in gas furnace and physical properties (FI, SI, LA, PSV, AAV, volume stability) examined. Alteration of the specific weight can result in tailoring slag properties for specific applications in the construction sector. Copyright © 2014 Elsevier B.V. All rights reserved.

Water-assisted extrusion of bio-based PETG/clay nanocomposites

NASA Astrophysics Data System (ADS)

Lee, Naeun; Lee, Sangmook

2018-02-01

Bio-based polyethylene terephthalate glycol-modified (PETG)/clay nanocomposites were prepared using the water-assisted extrusion process. The effects of different types of clay and clay mixing methods (with or without the use of water) and the resulting nanocomposites properties were investigated by measuring the rheological and tensile properties and morphologies. The valuable properties were achieved when Cloisite 30B was mixed in a slurry state. The results of the X-ray diffraction (XRD) and transmission electron microscopy (TEM) studies showed that the nano-clay was well dispersed within the PETG matrix. This shows that the slurry process could be an effective exfoliation method for many nanocomposites systems as well as for bio-based PETG/clay nanocomposites.

Exploring selection and recruitment processes for newly qualified nurses: a sequential-explanatory mixed-method study.

PubMed

Newton, Paul; Chandler, Val; Morris-Thomson, Trish; Sayer, Jane; Burke, Linda

2015-01-01

To map current selection and recruitment processes for newly qualified nurses and to explore the advantages and limitations of current selection and recruitment processes. The need to improve current selection and recruitment practices for newly qualified nurses is highlighted in health policy internationally. A cross-sectional, sequential-explanatory mixed-method design with 4 components: (1) Literature review of selection and recruitment of newly qualified nurses; and (2) Literature review of a public sector professions' selection and recruitment processes; (3) Survey mapping existing selection and recruitment processes for newly qualified nurses; and (4) Qualitative study about recruiters' selection and recruitment processes. Literature searches on the selection and recruitment of newly qualified candidates in teaching and nursing (2005-2013) were conducted. Cross-sectional, mixed-method data were collected from thirty-one (n = 31) individuals in health providers in London who had responsibility for the selection and recruitment of newly qualified nurses using a survey instrument. Of these providers who took part, six (n = 6) purposively selected to be interviewed qualitatively. Issues of supply and demand in the workforce, rather than selection and recruitment tools, predominated in the literature reviews. Examples of tools to measure values, attitudes and skills were found in the nursing literature. The mapping exercise found that providers used many selection and recruitment tools, some providers combined tools to streamline process and assure quality of candidates. Most providers had processes which addressed the issue of quality in the selection and recruitment of newly qualified nurses. The 'assessment centre model', which providers were adopting, allowed for multiple levels of assessment and streamlined recruitment. There is a need to validate the efficacy of the selection tools. © 2014 John Wiley & Sons Ltd.

Numerical prediction of algae cell mixing feature in raceway ponds using particle tracing methods.

PubMed

Ali, Haider; Cheema, Taqi A; Yoon, Ho-Sung; Do, Younghae; Park, Cheol W

2015-02-01

In the present study, a novel technique, which involves numerical computation of the mixing length of algae particles in raceway ponds, was used to evaluate the mixing process. A value of mixing length that is higher than the maximum streamwise distance (MSD) of algae cells indicates that the cells experienced an adequate turbulent mixing in the pond. A coupling methodology was adapted to map the pulsating effects of a 2D paddle wheel on a 3D raceway pond in this study. The turbulent mixing was examined based on the computations of mixing length, residence time, and algae cell distribution in the pond. The results revealed that the use of particle tracing methodology is an improved approach to define the mixing phenomenon more effectively. Moreover, the algae cell distribution aided in identifying the degree of mixing in terms of mixing length and residence time. © 2014 Wiley Periodicals, Inc.

Efficiency of RNA extraction from selected bacteria in the context of biogas production and metatranscriptomics.

PubMed

Stark, Lucy; Giersch, Tina; Wünschiers, Röbbe

2014-10-01

Understanding the microbial population in anaerobic digestion is an essential task to increase efficient substrate use and process stability. The metabolic state, represented e.g. by the transcriptome, of a fermenting system can help to find markers for monitoring industrial biogas production to prevent failures or to model the whole process. Advances in next-generation sequencing make transcriptomes accessible for large-scale analyses. In order to analyze the metatranscriptome of a mixed-species sample, isolation of high-quality RNA is the first step. However, different extraction methods may yield different efficiencies in different species. Especially in mixed-species environmental samples, unbiased isolation of transcripts is important for meaningful conclusions. We applied five different RNA-extraction protocols to nine taxonomic diverse bacterial species. Chosen methods are based on various lysis and extraction principles. We found that the extraction efficiency of different methods depends strongly on the target organism. RNA isolation of gram-positive bacteria was characterized by low yield whilst from gram-negative species higher concentrations can be obtained. Transferring our results to mixed-species investigations, such as metatranscriptomics with biofilms or biogas plants, leads to the conclusion that particular microorganisms might be over- or underrepresented depending on the method applied. Special care must be taken when using such metatranscriptomics data for, e.g. process modeling. Copyright © 2013 Elsevier Ltd. All rights reserved.

Selecting Candidates for Key Leadership Positions in Program Executive Offices Ground Combat Systems and Combat Service and Combat Service Support

DTIC Science & Technology

2016-10-14

the quantitative and qualitative data for this study . This study focuses on determining how well the current process for selecting candidates... Research Design This study is structured as a mixed methods survey, incorporating qualitative and quantitative questions. Mixed method was selected to...Management Command (LCMC) on the Detroit Arsenal in Warren, MI. At the time of the study , PEO GCS and PEO CS&CSS did not have a specific policy for

Comparing Pixel and Object-Based Approaches to Map an Understorey Invasive Shrub in Tropical Mixed Forests

PubMed Central

Niphadkar, Madhura; Nagendra, Harini; Tarantino, Cristina; Adamo, Maria; Blonda, Palma

2017-01-01

The establishment of invasive alien species in varied habitats across the world is now recognized as a genuine threat to the preservation of biodiversity. Specifically, plant invasions in understory tropical forests are detrimental to the persistence of healthy ecosystems. Monitoring such invasions using Very High Resolution (VHR) satellite remote sensing has been shown to be valuable in designing management interventions for conservation of native habitats. Object-based classification methods are very helpful in identifying invasive plants in various habitats, by their inherent nature of imitating the ability of the human brain in pattern recognition. However, these methods have not been tested adequately in dense tropical mixed forests where invasion occurs in the understorey. This study compares a pixel-based and object-based classification method for mapping the understorey invasive shrub Lantana camara (Lantana) in a tropical mixed forest habitat in the Western Ghats biodiversity hotspot in India. Overall, a hierarchical approach of mapping top canopy at first, and then further processing for the understorey shrub, using measures such as texture and vegetation indices proved effective in separating out Lantana from other cover types. In the first method, we implement a simple parametric supervised classification for mapping cover types, and then process within these types for Lantana delineation. In the second method, we use an object-based segmentation algorithm to map cover types, and then perform further processing for separating Lantana. The improved ability of the object-based approach to delineate structurally distinct objects with characteristic spectral and spatial characteristics of their own, as well as with reference to their surroundings, allows for much flexibility in identifying invasive understorey shrubs among the complex vegetation of the tropical forest than that provided by the parametric classifier. Conservation practices in tropical mixed forests can benefit greatly by adopting methods which use high resolution remotely sensed data and advanced techniques to monitor the patterns and effective functioning of native ecosystems by periodically mapping disturbances such as invasion. PMID:28620400

Cultural and Linguistic Adaptation of a Healthy Diet Text Message Intervention for Hispanic Adults Living in the United States.

PubMed

Cameron, Linda D; Durazo, Arturo; Ramírez, A Susana; Corona, Roberto; Ultreras, Mayra; Piva, Sonia

2017-03-01

Hispanics represent a critical target for culturally adapted diet interventions. In this formative research, we translated HealthyYouTXT, an mHealth program developed by the U.S. National Cancer Institute, into HealthyYouTXT en Español, a linguistically and culturally appropriate version for Spanish speakers in the United States. We report a three-stage, mixed-methods process through which we culturally adapted the text messages, evaluated their acceptability, and revised the program based on the findings. In Stage 1, we conducted initial translations and adaptations of the text libraries using an iterative, principle-guided process. In Stage 2, we used mixed methods including focus groups and surveys with 109 Hispanic adults to evaluate the acceptability and cultural appropriateness of the program. We used survey data to evaluate whether self-determination theory (SDT) factors (used to develop HealthyYouTXT) of autonomous motivation, controlled motivation, and amotivation and Hispanic cultural beliefs about familism, fatalism, and destiny predict program interest and its perceived efficacy. Mixed-methods analyses revealed substantial interest in HealthyYouTXT, with most participants desiring to use it and viewing it as highly efficacious. Both cultural beliefs (i.e., beliefs in destiny and, for men, high familism) and SDT motivations (i.e., autonomy) predicted HealthyYouTXT evaluations, suggesting utility in emphasizing them in messages. Higher destiny beliefs predicted lower interest, suggesting that they could impede program use. In Stage 3, we implemented the mixed-methods findings to finalize HealthyYouTXT en Español. The emergent linguistic principles and multistage, multimethods process can be applied in health communication adaptations.

Efficient Research Design: Using Value-of-Information Analysis to Estimate the Optimal Mix of Top-down and Bottom-up Costing Approaches in an Economic Evaluation alongside a Clinical Trial.

PubMed

Wilson, Edward C F; Mugford, Miranda; Barton, Garry; Shepstone, Lee

2016-04-01

In designing economic evaluations alongside clinical trials, analysts are frequently faced with alternative methods of collecting the same data, the extremes being top-down ("gross costing") and bottom-up ("micro-costing") approaches. A priori, bottom-up approaches may be considered superior to top-down approaches but are also more expensive to collect and analyze. In this article, we use value-of-information analysis to estimate the efficient mix of observations on each method in a proposed clinical trial. By assigning a prior bivariate distribution to the 2 data collection processes, the predicted posterior (i.e., preposterior) mean and variance of the superior process can be calculated from proposed samples using either process. This is then used to calculate the preposterior mean and variance of incremental net benefit and hence the expected net gain of sampling. We apply this method to a previously collected data set to estimate the value of conducting a further trial and identifying the optimal mix of observations on drug costs at 2 levels: by individual item (process A) and by drug class (process B). We find that substituting a number of observations on process A for process B leads to a modest £ 35,000 increase in expected net gain of sampling. Drivers of the results are the correlation between the 2 processes and their relative cost. This method has potential use following a pilot study to inform efficient data collection approaches for a subsequent full-scale trial. It provides a formal quantitative approach to inform trialists whether it is efficient to collect resource use data on all patients in a trial or on a subset of patients only or to collect limited data on most and detailed data on a subset. © The Author(s) 2016.

Tamm Review: Management of mixed-severity fire regime forests in Oregon, Washington, and Northern California

Treesearch

Paul F. Hessburg; Thomas A. Spies; David A. Perry; Carl N. Skinner; Alan H. Taylor; Peter M. Brown; Scott L. Stephens; Andrew J. Larson; Derek J. Churchill; Nicholas A. Povak; Peter H. Singleton; Brenda McComb; William J. Zielinski; Brandon M. Collins; R. Brion Salter; John J. Keane; Jerry F. Franklin; Greg Riegel

2016-01-01

Increasingly, objectives for forests with moderate- or mixed-severity fire regimes are to restore successionally diverse landscapes that are resistant and resilient to current and future stressors. Maintaining native species and characteristic processes requires this successional diversity, but methods to achieve it are poorly explained in the literature. In the Inland...

Nursing Home Quality, Cost, Staffing, and Staff Mix

ERIC Educational Resources Information Center

Rantz, Marilyn J.; Hicks, Lanis; Grando, Victoria; Petroski, Gregory F.; Madsen, Richard W.; Mehr, David R.; Conn, Vicki; Zwygart-Staffacher, Mary; Scott, Jill; Flesner, Marcia; Bostick, Jane; Porter, Rose; Maas, Meridean

2004-01-01

Purpose: The purpose of this study was to describe the processes of care, organizational attributes, cost of care, staffing level, and staff mix in a sample of Missouri homes with good, average, and poor resident outcomes. Design and Methods: A three-group exploratory study design was used, with 92 nursing homes randomly selected from all nursing…

A new unsteady mixing model to predict NO(x) production during rapid mixing in a dual-stage combustor

NASA Technical Reports Server (NTRS)

Menon, Suresh

1992-01-01

An advanced gas turbine engine to power supersonic transport aircraft is currently under study. In addition to high combustion efficiency requirements, environmental concerns have placed stringent restrictions on the pollutant emissions from these engines. A combustor design with the potential for minimizing pollutants such as NO(x) emissions is undergoing experimental evaluation. A major technical issue in the design of this combustor is how to rapidly mix the hot, fuel-rich primary zone product with the secondary diluent air to obtain a fuel-lean mixture for combustion in the second stage. Numerical predictions using steady-state methods cannot account for the unsteady phenomena in the mixing region. Therefore, to evaluate the effect of unsteady mixing and combustion processes, a novel unsteady mixing model is demonstrated here. This model has been used to study multispecies mixing as well as propane-air and hydrogen-air jet nonpremixed flames, and has been used to predict NO(x) production in the mixing region. Comparison with available experimental data show good agreement, thereby providing validation of the mixing model. With this demonstration, this mixing model is ready to be implemented in conjunction with steady-state prediction methods and provide an improved engineering design analysis tool.

How work context affects operating room processes: using data mining and computer simulation to analyze facility and process design.

PubMed

Baumgart, André; Denz, Christof; Bender, Hans-Joachim; Schleppers, Alexander

2009-01-01

The complexity of the operating room (OR) requires that both structural (eg, department layout) and behavioral (eg, staff interactions) patterns of work be considered when developing quality improvement strategies. In our study, we investigated how these contextual factors influence outpatient OR processes and the quality of care delivered. The study setting was a German university-affiliated hospital performing approximately 6000 outpatient surgeries annually. During the 3-year-study period, the hospital significantly changed its outpatient OR facility layout from a decentralized (ie, ORs in adjacent areas of the building) to a centralized (ie, ORs in immediate vicinity of each other) design. To study the impact of the facility change on OR processes, we used a mixed methods approach, including process analysis, process modeling, and social network analysis of staff interactions. The change in facility layout was seen to influence OR processes in ways that could substantially affect patient outcomes. For example, we found a potential for more errors during handovers in the new centralized design due to greater interdependency between tasks and staff. Utilization of the mixed methods approach in our analysis, as compared with that of a single assessment method, enabled a deeper understanding of the OR work context and its influence on outpatient OR processes.

Biochemicals from food waste and recalcitrant biomass via syngas fermentation: A review.

PubMed

Wainaina, Steven; Horváth, Ilona Sárvári; Taherzadeh, Mohammad J

2018-01-01

An effective method for the production of value-added chemicals from food waste and lignocellulosic materials is a hybrid thermal-biological process, which involves gasification of the solid materials to syngas (primarily CO and H 2 ) followed by fermentation. This paper reviews the recent advances in this process. The special focus is on the cultivation methods that involve the use of single strains, defined mixed cultures and undefined mixed cultures for production of carboxylic acids and higher alcohols. A rate limiting step in these processes is the low mass transfer between the gas and the liquid phases. Therefore, novel techniques that can enhance the gas-liquid mass transfer including membrane- and trickle-bed bioreactors were discussed. Such bioreactors have shown promising results in increasing the volumetric mass transfer coefficient (k L a). High gas pressure also influences the mass transfer in certain batch processes, although the presence of impurities in the gas would impede the process. Copyright © 2017 Elsevier Ltd. All rights reserved.

Global Explorers: An Examination of Program Processes and Outcomes

ERIC Educational Resources Information Center

Duerden, Mathew David

2009-01-01

This study utilizes longitudinal, mixed-method data drawn from participants in an environmental education/international immersion program for middle high-school students to study outcomes and processes associated with program participation. Studies of program outcomes and processes are important for better understanding the design and impact of…

Heats of Mixing Using an Isothermal Titration Calorimeter: Associated Thermal Effects

PubMed Central

de Rivera, Manuel Rodríguez; Socorro, Fabiola; Matos, José S.

2009-01-01

The correct determination of the energy generated or absorbed in the sample cell of an Isothermal Titration Calorimeter (ITC) requires a thorough analysis of the calorimetric signal. This means the identification and quantification of any thermal effect inherent to the working method. In this work, it is carried out a review on several thermal effects, studied by us in previous work, and which appear when an ITC is used for measuring the heats of mixing of liquids in a continuous mode. These effects are due to: (i) the difference between the temperature of the injected liquid and the temperature of the mixture during the mixing process, (ii) the increase of the liquid volume located in the mixing cell and (iii) the stirring velocity. Besides, methods for the identification and quantification of the mentioned effects are suggested. PMID:19742175

Single fiber lignin distributions based on the density gradient column method

Treesearch

Brian Boyer; Alan W. Rudie

2007-01-01

The density gradient column method was used to determine the effects of uniform and non-uniform pulping processes on variation in individual fiber lignin concentrations of the resulting pulps. A density gradient column uses solvents of different densities and a mixing process to produce a column of liquid with a smooth transition from higher density at the bottom to...

Highly accurate symplectic element based on two variational principles

NASA Astrophysics Data System (ADS)

Qing, Guanghui; Tian, Jia

2018-02-01

For the stability requirement of numerical resultants, the mathematical theory of classical mixed methods are relatively complex. However, generalized mixed methods are automatically stable, and their building process is simple and straightforward. In this paper, based on the seminal idea of the generalized mixed methods, a simple, stable, and highly accurate 8-node noncompatible symplectic element (NCSE8) was developed by the combination of the modified Hellinger-Reissner mixed variational principle and the minimum energy principle. To ensure the accuracy of in-plane stress results, a simultaneous equation approach was also suggested. Numerical experimentation shows that the accuracy of stress results of NCSE8 are nearly the same as that of displacement methods, and they are in good agreement with the exact solutions when the mesh is relatively fine. NCSE8 has advantages of the clearing concept, easy calculation by a finite element computer program, higher accuracy and wide applicability for various linear elasticity compressible and nearly incompressible material problems. It is possible that NCSE8 becomes even more advantageous for the fracture problems due to its better accuracy of stresses.

Building Capacity of Occupational Therapy Practitioners to Address the Mental Health Needs of Children and Youth: A Mixed-Methods Study of Knowledge Translation

PubMed Central

Demirjian, Louise; LaGuardia, Teri; Thompson-Repas, Karen; Conway, Carol; Michaud, Paula

2015-01-01

PURPOSE. We explored the meaning and outcomes of a 6-mo building capacity process designed to promote knowledge translation of a public health approach to mental health among pediatric occupational therapy practitioners participating in a Community of Practice. METHOD. A one-group (N = 117) mixed-methods design using a pretest–posttest survey and qualitative analysis of written reflections was used to explore the meaning and outcomes of the building capacity process. RESULTS. Statistically significant improvements (p < .02) in pretest–posttest scores of knowledge, beliefs, and actions related to a public health approach to mental health were found. Qualitative findings suggest that participation resulted in a renewed commitment to addressing children’s mental health. CONCLUSION. The building capacity process expanded practitioner knowledge, renewed energy, and promoted confidence, resulting in change leaders empowered to articulate, advocate for, and implement practice changes reflecting occupational therapy’s role in addressing children’s mental health. PMID:26565099

Processing of solid solution, mixed uranium/refractory metal carbides for advanced space nuclear power and propulsion systems

NASA Astrophysics Data System (ADS)

Knight, Travis Warren

Nuclear thermal propulsion (NTP) and space nuclear power are two enabling technologies for the manned exploration of space and the development of research outposts in space and on other planets such as Mars. Advanced carbide nuclear fuels have been proposed for application in space nuclear power and propulsion systems. This study examined the processing technologies and optimal parameters necessary to fabricate samples of single phase, solid solution, mixed uranium/refractory metal carbides. In particular, the pseudo-ternary carbide, UC-ZrC-NbC, system was examined with uranium metal mole fractions of 5% and 10% and corresponding uranium densities of 0.8 to 1.8 gU/cc. Efforts were directed to those methods that could produce simple geometry fuel elements or wafers such as those used to fabricate a Square Lattice Honeycomb (SLHC) fuel element and reactor core. Methods of cold uniaxial pressing, sintering by induction heating, and hot pressing by self-resistance heating were investigated. Solid solution, high density (low porosity) samples greater than 95% TD were processed by cold pressing at 150 MPa and sintering above 2600 K for times longer than 90 min. Some impurity oxide phases were noted in some samples attributed to residual gases in the furnace during processing. Also, some samples noted secondary phases of carbon and UC2 due to some hyperstoichiometric powder mixtures having carbon-to-metal ratios greater than one. In all, 33 mixed carbide samples were processed and analyzed with half bearing uranium as ternary carbides of UC-ZrC-NbC. Scanning electron microscopy, x-ray diffraction, and density measurements were used to characterize samples. Samples were processed from powders of the refractory mono-carbides and UC/UC 2 or from powders of uranium hydride (UH3), graphite, and refractory metal carbides to produce hypostoichiometric mixed carbides. Samples processed from the constituent carbide powders and sintered at temperatures above the melting point of UC showed signs of liquid phase sintering and were shown to be largely solid solutions. Pre-compaction of mixed carbide powders prior to sintering was shown to be necessary to achieve high densities. Hypostoichiometric, samples processed at 2500 K exhibited only the initial stage of sintering and solid solution formation. Based on these findings, a suggested processing methodology is proposed for producing high density, solid solution, mixed carbide fuels. Pseudo-binary, refractory carbide samples hot pressed at 3100 K and 6 MPa showed comparable densities (approximately 85% of the theoretical value) to samples processed by cold pressing and sintering at temperatures of 2800 K.

An efficient, maintenance free and approved method for spectroscopic control and monitoring of blend uniformity: The moving F-test.

PubMed

Besseling, Rut; Damen, Michiel; Tran, Thanh; Nguyen, Thanh; van den Dries, Kaspar; Oostra, Wim; Gerich, Ad

2015-10-10

Dry powder mixing is a wide spread Unit Operation in the Pharmaceutical industry. With the advent of in-line Near Infrared (NIR) Spectroscopy and Quality by Design principles, application of Process Analytical Technology to monitor Blend Uniformity (BU) is taking a more prominent role. Yet routine use of NIR for monitoring, let alone control of blending processes is not common in the industry, despite the improved process understanding and (cost) efficiency that it may offer. Method maintenance, robustness and translation to regulatory requirements have been important barriers to implement the method. This paper presents a qualitative NIR-BU method offering a convenient and compliant approach to apply BU control for routine operation and process understanding, without extensive calibration and method maintenance requirements. The method employs a moving F-test to detect the steady state of measured spectral variances and the endpoint of mixing. The fundamentals and performance characteristics of the method are first presented, followed by a description of the link to regulatory BU criteria, the method sensitivity and practical considerations. Applications in upscaling, tech transfer and commercial production are described, along with evaluation of the method performance by comparison with results from quantitative calibration models. A full application, in which end-point detection via the F-test controls the blending process of a low dose product, was successfully filed in Europe and Australia, implemented in commercial production and routinely used for about five years and more than 100 batches. Copyright © 2015 Elsevier B.V. All rights reserved.

A universal quantum frequency converter via four-wave-mixing processes

NASA Astrophysics Data System (ADS)

Cheng, Mingfei; Fang, Jinghuai

2016-06-01

We present a convenient and flexible way to realize a universal quantum frequency converter by using nondegenerate four-wave-mixing processes in the ladder-type three-level atomic system. It is shown that quantum state exchange between two fields with large frequency difference can be readily achieved, where one corresponds to the atomic resonant transition in the visible spectral region for quantum memory and the other to the telecommunication range wavelength (1550 nm) for long-distance transmission over optical fiber. This method would bring great facility in realistic quantum information processing protocols with atomic ensembles as quantum memory and low-loss optical fiber as transmission channel.

Development of a new continuous process for mixing of complex non-Newtonian fluids

NASA Astrophysics Data System (ADS)

Migliozzi, Simona; Mazzei, Luca; Sochon, Bob; Angeli, Panagiota; Thames Multiphase Team; Coral Project Collaboration

2017-11-01

Design of new continuous mixing operations poses many challenges, especially when dealing with highly viscous non-Newtonian fluids. Knowledge of complex rheological behaviour of the working mixture is crucial for development of an efficient process. In this work, we investigate the mixing performance of two different static mixers and the effects of the mixture rheology on the manufacturing of novel non-aqueous-based oral care products using experimental and computational fluid dynamic methods. The two liquid phases employed, i.e. a carbomer suspension in polyethylene glycol and glycerol, start to form a gel when they mix. We studied the structure evolution of the liquid mixture using time-resolved rheometry and we obtained viscosity rheograms at different phase ratios from pressure drop measurements in a customized mini-channel. The numerical results and rheological model were validated with experimental measurements carried out in a specifically designed setup. EPSRS-CORAL.

Two-step simulation of velocity and passive scalar mixing at high Schmidt number in turbulent jets

NASA Astrophysics Data System (ADS)

Rah, K. Jeff; Blanquart, Guillaume

2016-11-01

Simulation of passive scalar in the high Schmidt number turbulent mixing process requires higher computational cost than that of velocity fields, because the scalar is associated with smaller length scales than velocity. Thus, full simulation of both velocity and passive scalar with high Sc for a practical configuration is difficult to perform. In this work, a new approach to simulate velocity and passive scalar mixing at high Sc is suggested to reduce the computational cost. First, the velocity fields are resolved by Large Eddy Simulation (LES). Then, by extracting the velocity information from LES, the scalar inside a moving fluid blob is simulated by Direct Numerical Simulation (DNS). This two-step simulation method is applied to a turbulent jet and provides a new way to examine a scalar mixing process in a practical application with smaller computational cost. NSF, Samsung Scholarship.

CFD study of mixing miscible liquid with high viscosity difference in a stirred tank

NASA Astrophysics Data System (ADS)

Madhania, S.; Cahyani, A. B.; Nurtono, T.; Muharam, Y.; Winardi, S.; Purwanto, W. W.

2018-03-01

The mixing process of miscible liquids with high viscosity difference is crucial role even though the solution mutually dissolved. This paper describes the mixing behaviour of the water-molasses system in a conical-bottomed cylindrical stirred tank (D = 0.28 m and H = 0.395 m) equipped with a side-entry Marine propeller (d = 0.036 m) under the turbulence regime using a three-dimensional and transient CFD-simulation. The objective of this work is to compare the solution strategies was applied in the computational analysis to capture the detail phenomena of mixing two miscible liquid with high viscosity difference. Four solution strategies that have been used are the RANS Standards k-ε (SKE) model as the turbulence model coupled with the Multiple Reference Frame (MRF) method for impeller motion, the RANS Realizable k-ε (RKE) combine with the MRF, the Large Eddy Simulation (LES) coupled with the Sliding Mesh (SM) method and the LES-MRF combination. The transient calculations were conducted with Ansys Fluent 17.1 version. The mixing behaviour and the propeller characteristic are to be compared and discussed in this work. The simulation results show the differences of flow pattern and the molasses distribution profile for every solution strategy. The variation of the flow pattern which happened in each solution strategy showing an instability of the mixing process in stirred tank. The LES-SM strategy shows the realistic direction of flow than another solution strategies.

Double-path acquisition of pulse wave transit time and heartbeat using self-mixing interferometry

NASA Astrophysics Data System (ADS)

Wei, Yingbin; Huang, Wencai; Wei, Zheng; Zhang, Jie; An, Tong; Wang, Xiulin; Xu, Huizhen

2017-06-01

We present a technique based on self-mixing interferometry for acquiring the pulse wave transit time (PWTT) and heartbeat. A signal processing method based on Continuous Wavelet Transform and Hilbert Transform is applied to extract potentially useful information in the self-mixing interference (SMI) signal, including PWTT and heartbeat. Then, some cardiovascular characteristics of the human body are easily acquired without retrieving the SMI signal by complicated algorithms. Experimentally, the PWTT is measured on the finger and the toe of the human body using double-path self-mixing interferometry. Experimental statistical data show the relation between the PWTT and blood pressure, which can be used to estimate the systolic pressure value by fitting. Moreover, the measured heartbeat shows good agreement with that obtained by a photoplethysmography sensor. The method that we demonstrate, which is based on self-mixing interferometry with significant advantages of simplicity, compactness and non-invasion, effectively illustrates the viability of the SMI technique for measuring other cardiovascular signals.

Understanding the effects of time on collaborative learning processes in problem based learning: a mixed methods study.

PubMed

Hommes, J; Van den Bossche, P; de Grave, W; Bos, G; Schuwirth, L; Scherpbier, A

2014-10-01

Little is known how time influences collaborative learning groups in medical education. Therefore a thorough exploration of the development of learning processes over time was undertaken in an undergraduate PBL curriculum over 18 months. A mixed-methods triangulation design was used. First, the quantitative study measured how various learning processes developed within and over three periods in the first 1,5 study years of an undergraduate curriculum. Next, a qualitative study using semi-structured individual interviews focused on detailed development of group processes driving collaborative learning during one period in seven tutorial groups. The hierarchic multilevel analyses of the quantitative data showed that a varying combination of group processes developed within and over the three observed periods. The qualitative study illustrated development in psychological safety, interdependence, potency, group learning behaviour, social and task cohesion. Two new processes emerged: 'transactive memory' and 'convergence in mental models'. The results indicate that groups are dynamic social systems with numerous contextual influences. Future research should thus include time as an important influence on collaborative learning. Practical implications are discussed.

Development of Mix Design Method in Efforts to Increase Concrete Performance Using Portland Pozzolana Cement (PPC)

NASA Astrophysics Data System (ADS)

Krisnamurti; Soehardjono, A.; Zacoeb, A.; Wibowo, A.

2018-01-01

Earthquake disaster can cause infrastructure damage. Prevention of human casualties from disasters should do. Prevention efforts can do through improving the mechanical performance of building materials. To achieve high-performance concrete (HPC), usually used Ordinary Portland Cement (OPC). However, the most widely circulating cement types today are Portland Pozzolana Cement (PPC) or Portland Composite Cement (PCC). Therefore, the proportion of materials used in the HPC mix design needs to adjust to achieve the expected performance. This study aims to develop a concrete mix design method using PPC to fulfil the criteria of HPC. The study refers to the code/regulation of concrete mixtures that use OPC based on the results of laboratory testing. This research uses PPC material, gravel from Malang area, Lumajang sand, water, silica fume and superplasticizer of a polycarboxylate copolymer. The analyzed information includes the investigation results of aggregate properties, concrete mixed composition, water-binder ratio variation, specimen dimension, compressive strength and elasticity modulus of the specimen. The test results show that the concrete compressive strength achieves value between 25 MPa to 55 MPa. The mix design method that has developed can simplify the process of concrete mix design using PPC to achieve the certain desired performance of concrete.

Investigation of optical current transformer signal processing method based on an improved Kalman algorithm

NASA Astrophysics Data System (ADS)

Shen, Yan; Ge, Jin-ming; Zhang, Guo-qing; Yu, Wen-bin; Liu, Rui-tong; Fan, Wei; Yang, Ying-xuan

2018-01-01

This paper explores the problem of signal processing in optical current transformers (OCTs). Based on the noise characteristics of OCTs, such as overlapping signals, noise frequency bands, low signal-to-noise ratios, and difficulties in acquiring statistical features of noise power, an improved standard Kalman filtering algorithm was proposed for direct current (DC) signal processing. The state-space model of the OCT DC measurement system is first established, and then mixed noise can be processed by adding mixed noise into measurement and state parameters. According to the minimum mean squared error criterion, state predictions and update equations of the improved Kalman algorithm could be deduced based on the established model. An improved central difference Kalman filter was proposed for alternating current (AC) signal processing, which improved the sampling strategy and noise processing of colored noise. Real-time estimation and correction of noise were achieved by designing AC and DC noise recursive filters. Experimental results show that the improved signal processing algorithms had a good filtering effect on the AC and DC signals with mixed noise of OCT. Furthermore, the proposed algorithm was able to achieve real-time correction of noise during the OCT filtering process.

METHOD OF MAKING REFRACTORY BODIES

DOEpatents

Andersen, J.C.

1960-05-31

A method is given for the manufacture of silicon carbide bodies that are characterized by high density, high purity, and superior resistance to oxidative deterioration. Dense silicon bodies are obtained by a process in which granular silicon carbide, a carbonizable material, and a carbonaceous material are mixed together, the mixture is shaped as desired, and then the shape is fired in the presence of more than the stoichiometric amount of silicon. The carbonizable material preferably includes a temporary binder that is set before the firing step to hold the mix in shape for firing.

Coalescence of liquid droplets in micro fluidic device

NASA Astrophysics Data System (ADS)

Wu, Mingming; Cubaud, Thomas; Ho, Chih-Ming; Chiou, Peiyu; Wu, Ming C.

2003-11-01

We study experimentally the initial dynamic process when two droplets (diameter range 100μm -1000μm) merge in micro fluidic device. It is known that passive mixing in micro fluidic device relies mostly on a time consuming process - diffusion. In digital fluidic platform,(S.K. Cho, H. Moon, and C.J. Kim, J. of Microelectromechanical Systems, Vol 12, No 1, 70(2003).) we find that the surface-tension-driven flow at the initial stage of the merging can be used to enhance mixing. In our experiments, the droplets are manipulated by two different methods, and results are compared. In one method, the droplet is manipulated by pressure driven flow in micro channels, and in the other, the droplet is moved using an optical electro-wetting device. The droplet is seeded with 4 μm diameter latex particles for visualizing the mixing process. The outlines of the droplets as well as the flow patterns marked by the latex particles inside the droplets are recorded using a high speed imaging system. This work is supported by the National Science Foundation (CTS-0121340), Institute for CMISE (a NASA URETI), DARPA MPG program, and DARPA Optoelectronics Center Program (CHIPS).

Processing and fabrication of mixed uranium/refractory metal carbide fuels with liquid-phase sintering

NASA Astrophysics Data System (ADS)

Knight, Travis W.; Anghaie, Samim

2002-11-01

Optimization of powder processing techniques were sought for the fabrication of single-phase, solid-solution mixed uranium/refractory metal carbide nuclear fuels - namely (U, Zr, Nb)C. These advanced, ultra-high temperature nuclear fuels have great potential for improved performance over graphite matrix, dispersed fuels tested in the Rover/NERVA program of the 1960s and early 1970s. Hypostoichiometric fuel samples with carbon-to-metal ratios of 0.98, uranium metal mole fractions of 5% and 10%, and porosities less than 5% were fabricated. These qualities should provide for the longest life and highest performance capability for these fuels. Study and optimization of processing methods were necessary to provide the quality assurance of samples for meaningful testing and assessment of performance for nuclear thermal propulsion applications. The processing parameters and benefits of enhanced sintering by uranium carbide liquid-phase sintering were established for the rapid and effective consolidation and formation of a solid-solution mixed carbide nuclear fuel.

Rapid screening of mixed edible oils and gutter oils by matrix-assisted laser desorption/ionization mass spectrometry.

PubMed

Ng, Tsz-Tsun; So, Pui-Kin; Zheng, Bo; Yao, Zhong-Ping

2015-07-16

Authentication of edible oils is a long-term issue in food safety, and becomes particularly important with the emergence and wide spread of gutter oils in recent years. Due to the very high analytical demand and diversity of gutter oils, a high throughput analytical method and a versatile strategy for authentication of mixed edible oils and gutter oils are highly desirable. In this study, an improved matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) method has been developed for direct analysis of edible oils. This method involved on-target sample loading, automatic data acquisition and simple data processing. MALDI-MS spectra with high quality and high reproducibility have been obtained using this method, and a preliminary spectral database of edible oils has been set up. The authenticity of an edible oil sample can be determined by comparing its MALDI-MS spectrum and principal component analysis (PCA) results with those of its labeled oil in the database. This method is simple and the whole process only takes several minutes for analysis of one oil sample. We demonstrated that the method was sensitive to change in oil compositions and can be used for measuring compositions of mixed oils. The capability of the method for determining mislabeling enables it for rapid screening of gutter oils since fraudulent mislabeling is a common feature of gutter oils. Copyright © 2015 Elsevier B.V. All rights reserved.

Conceptual transitions in methods of skull-photo superimposition that impact the reliability of identification: a review.

PubMed

Jayaprakash, Paul T

2015-01-01

Establishing identification during skull-photo superimposition relies on correlating the salient morphological features of an unidentified skull with those of a face-image of a suspected dead individual using image overlay processes. Technical progression in the process of overlay has included the incorporation of video cameras, image-mixing devices and software that enables real-time vision-mixing. Conceptual transitions occur in the superimposition methods that involve 'life-size' images, that achieve orientation of the skull to the posture of the face in the photograph and that assess the extent of match. A recent report on the reliability of identification using the superimposition method adopted the currently prevalent methods and suggested an increased rate of failures when skulls were compared with related and unrelated face images. The reported reduction in the reliability of the superimposition method prompted a review of the transition in the concepts that are involved in skull-photo superimposition. The prevalent popular methods for visualizing the superimposed images at less than 'life-size', overlaying skull-face images by relying on the cranial and facial landmarks in the frontal plane when orienting the skull for matching and evaluating the match on a morphological basis by relying on mix-mode alone are the major departures in the methodology that may have reduced the identification reliability. The need to reassess the reliability of the method that incorporates the concepts which have been considered appropriate by the practitioners is stressed. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

In-gel and OFFGEL-based proteomic approach for authentication of meat species from minced meat and meat products.

PubMed

Naveena, Basappa M; Jagadeesh, Deepak S; Kamuni, Veeranna; Muthukumar, Muthupalani; Kulkarni, Vinayak V; Kiran, Mohan; Rapole, Srikanth

2018-02-01

Fraudulent mislabelling of processed meat products on a global scale that cannot be detected using conventional techniques necessitates sensitive, robust and accurate methods of meat authentication to ensure food safety and public health. In the present study, we developed an in-gel (two-dimensional gel electrophoresis, 2DE) and OFFGEL-based proteomic method for authenticating raw and cooked water buffalo (Bubalus bubalis), sheep (Ovis aries) and goat (Caprus hircus) meat and their mixes. The matrix-assisted liquid desorption/ionization time-of-flight mass spectrometric analysis of proteins separated using 2DE or OFFGEL electrophoresis delineated species-specific peptide biomarkers derived from myosin light chain 1 and 2 (MLC1 and MLC2) of buffalo-sheep-goat meat mix in definite proportions at 98:1:1, 99:0.5:0.5 and 99.8:0.1:0.1 that were found stable to resist thermal processing. In-gel and OFFGEL-based proteomic approaches are efficient in authenticating meat mixes spiked at minimum 1.0% and 0.1% levels, respectively, in triple meat mix for both raw and cooked samples. The study demonstrated that authentication of meat from a complex mix of three closely related species requires identification of more than one species-specific peptide due to close similarity between their amino acid sequences. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

Method for producing catalysis from coal

DOEpatents

Farcasiu, Malvina; Derbyshire, Frank; Kaufman, Phillip B.; Jagtoyen, Marit

1998-01-01

A method for producing catalysts from coal is provided comprising mixing an aqueous alkali solution with the coal, heating the aqueous mixture to treat the coal, drying the now-heated aqueous mixture, reheating the mixture to form carbonized material, cooling the mixture, removing excess alkali from the carbonized material, and recovering the carbonized material, wherein the entire process is carried out in controlled atmospheres, and the carbonized material is a hydrocracking or hydrodehalogenation catalyst for liquid phase reactions. The invention also provides for a one-step method for producing catalysts from coal comprising mixing an aqueous alkali solution with the coal to create a mixture, heating the aqueous mixture from an ambient temperature to a predetermined temperature at a predetermined rate, cooling the mixture, and washing the mixture to remove excess alkali from the treated and carbonized material, wherein the entire process is carried out in a controlled atmosphere.

Method for producing catalysts from coal

DOEpatents

Farcasiu, M.; Derbyshire, F.; Kaufman, P.B.; Jagtoyen, M.

1998-02-24

A method for producing catalysts from coal is provided comprising mixing an aqueous alkali solution with the coal, heating the aqueous mixture to treat the coal, drying the now-heated aqueous mixture, reheating the mixture to form carbonized material, cooling the mixture, removing excess alkali from the carbonized material, and recovering the carbonized material, wherein the entire process is carried out in controlled atmospheres, and the carbonized material is a hydrocracking or hydrodehalogenation catalyst for liquid phase reactions. The invention also provides for a one-step method for producing catalysts from coal comprising mixing an aqueous alkali solution with the coal to create a mixture, heating the aqueous mixture from an ambient temperature to a predetermined temperature at a predetermined rate, cooling the mixture, and washing the mixture to remove excess alkali from the treated and carbonized material, wherein the entire process is carried out in a controlled atmosphere. 1 fig.

Developing an Engineering Design Process Assessment using Mixed Methods.

PubMed

Wind, Stefanie A; Alemdar, Meltem; Lingle, Jeremy A; Gale, Jessica D; Moore, Roxanne A

Recent reforms in science education worldwide include an emphasis on engineering design as a key component of student proficiency in the Science, Technology, Engineering, and Mathematics disciplines. However, relatively little attention has been directed to the development of psychometrically sound assessments for engineering. This study demonstrates the use of mixed methods to guide the development and revision of K-12 Engineering Design Process (EDP) assessment items. Using results from a middle-school EDP assessment, this study illustrates the combination of quantitative and qualitative techniques to inform item development and revisions. Overall conclusions suggest that the combination of quantitative and qualitative evidence provides an in-depth picture of item quality that can be used to inform the revision and development of EDP assessment items. Researchers and practitioners can use the methods illustrated here to gather validity evidence to support the interpretation and use of new and existing assessments.

Multi-objective Analysis for a Sequencing Planning of Mixed-model Assembly Line

NASA Astrophysics Data System (ADS)

Shimizu, Yoshiaki; Waki, Toshiya; Yoo, Jae Kyu

Diversified customer demands are raising importance of just-in-time and agile manufacturing much more than before. Accordingly, introduction of mixed-model assembly lines becomes popular to realize the small-lot-multi-kinds production. Since it produces various kinds on the same assembly line, a rational management is of special importance. With this point of view, this study focuses on a sequencing problem of mixed-model assembly line including a paint line as its preceding process. By taking into account the paint line together, reducing work-in-process (WIP) inventory between these heterogeneous lines becomes a major concern of the sequencing problem besides improving production efficiency. Finally, we have formulated the sequencing problem as a bi-objective optimization problem to prevent various line stoppages, and to reduce the volume of WIP inventory simultaneously. Then we have proposed a practical method for the multi-objective analysis. For this purpose, we applied the weighting method to derive the Pareto front. Actually, the resulting problem is solved by a meta-heuristic method like SA (Simulated Annealing). Through numerical experiments, we verified the validity of the proposed approach, and discussed the significance of trade-off analysis between the conflicting objectives.

Two-species mixing in a nested Penning trap for antihydrogen trapping

NASA Astrophysics Data System (ADS)

Ordonez, C. A.; Weathers, D. L.

2008-08-01

There exists an international quest to trap neutral antimatter in the form of antihydrogen for scientific study. One method that is being developed for trapping antihydrogen employs a nested Penning trap. Such a trap serves to mix positrons and antiprotons so as to produce low energy antihydrogen atoms. Mixing is achieved when the confinement volumes of the two species overlap one another. In the work presented here, a theoretical understanding of the mixing process is developed by analyzing a mixing scheme that was recently reported [G. Gabrielse et al., Phys. Rev. Lett. 100, 113001 (2008)]. The results indicate that positron space charge or collisions among antiprotons may substantially reduce the fraction of antiprotons that have an energy suitable for antihydrogen trapping.

Mixing enhancement of reacting parallel fuel jets in a supersonic combustor

NASA Technical Reports Server (NTRS)

Drummond, J. P.

1991-01-01

Pursuant to a NASA-Langley development program for a scramjet HST propulsion system entailing the optimization of the scramjet combustor's fuel-air mixing and reaction characteristics, a numerical study has been conducted of the candidate parallel fuel injectors. Attention is given to a method for flow mixing-process and combustion-efficiency enhancement in which a supersonic circular hydrogen jet coflows with a supersonic air stream. When enhanced by a planar oblique shock, the injector configuration exhibited a substantial degree of induced vorticity in the fuel stream which increased mixing and chemical reaction rates, relative to the unshocked configuration. The resulting heat release was effective in breaking down the stable hydrogen vortex pair that had inhibited more extensive fuel-air mixing.

Coupled charge migration and fluid mixing in reactive fronts

NASA Astrophysics Data System (ADS)

Ghosh, Uddipta; Bandopadhyay, Aditya; Jougnot, Damien; Le Borgne, Tanguy; Meheust, Yves

2017-04-01

Quantifying fluid mixing in subsurface environments and its consequence on biogeochemical reactions is of paramount importance owing to its role in processes such as contaminant migration, aquifer remediation, CO2 sequestration or clogging processes, to name a few (Dentz et al. 2011). The presence of strong velocity gradients in porous media is expected to lead to enhanced diffusive mixing and augmented reaction rates (Le Borgne et al. 2014). Accurate in situ imaging of subsurface reactive solute transport and mixing remains to date a challenging proposition: the opacity of the medium prevents optical imaging and field methods based on tracer tests do not provide spatial information. Recently developed geophysical methods based on the temporal monitoring of electrical conductivity and polarization have shown promises for mapping and monitoring biogeochemical reactions in the subsurface although it remains challenging to decipher the multiple sources of electrical signals (e.g. Knight et al. 2010). In this work, we explore the coupling between fluid mixing, reaction and charge migration in porous media to evaluate the potential of mapping reaction rates from electrical measurements. To this end, we develop a new theoretical framework based on a lamellar mixing model (Le Borgne et al. 2013) to quantify changes in electrical mobility induced by chemical reactions across mixing fronts. Electrical conductivity and induced polarization are strongly dependent on the concentration of ionic species, which in turn depend on the local reaction rates. Hence, our results suggest that variation in real and complex electrical conductivity may be quantitatively related to the mixing and reaction dynamics. Thus, the presented theory provides a novel upscaling framework for quantifying the coupling between mixing, reaction and charge migration in heterogeneous porous media flows. References: Dentz. et al., Mixing, spreading and reaction in heterogeneous media: A brief review J. Contam. Hydrol. 120-121, 1 (2011). Le Borgne et al. Impact of Fluid Deformation on Mixing-Induced Chemical Reactions in heterogeneous Flows, Geophys. Res. Lett. 41, 7898 (2014). Knight, et al., Geophysics at the interface: Response of geophysical properties to solid-fluid, fluid-fluid, and solid-solid interfaces. Rev. Geophys. 48, (2010). Le Borgne et al. (2013) Stretching, coalescence and mixing in porous media, Phys. Rev. Lett., 110, 204501

Selection of Sustainable Processes using Sustainability ...

EPA Pesticide Factsheets

Chemical products can be obtained by process pathways involving varying amounts and types of resources, utilities, and byproduct formation. When such competing process options such as six processes for making methanol as are considered in this study, it is necessary to identify the most sustainable option. Sustainability of a chemical process is generally evaluated with indicators that require process and chemical property data. These indicators individually reflect the impacts of the process on areas of sustainability, such as the environment or society. In order to choose among several alternative processes an overall comparative analysis is essential. Generally net profit will show the most economic process. A mixed integer optimization problem can also be solved to identify the most economic among competing processes. This method uses economic optimization and leaves aside the environmental and societal impacts. To make a decision on the most sustainable process, the method presented here rationally aggregates the sustainability indicators into a single index called sustainability footprint (De). Process flow and economic data were used to compute the indicator values. Results from sustainability footprint (De) are compared with those from solving a mixed integer optimization problem. In order to identify the rank order of importance of the indicators, a multivariate analysis is performed using partial least square variable importance in projection (PLS-VIP)

Application of multi attribute failure mode analysis of milk production using analytical hierarchy process method

NASA Astrophysics Data System (ADS)

Rucitra, A. L.

2018-03-01

Pusat Koperasi Induk Susu (PKIS) Sekar Tanjung, East Java is one of the modern dairy industries producing Ultra High Temperature (UHT) milk. A problem that often occurs in the production process in PKIS Sekar Tanjung is a mismatch between the production process and the predetermined standard. The purpose of applying Analytical Hierarchy Process (AHP) was to identify the most potential cause of failure in the milk production process. Multi Attribute Failure Mode Analysis (MAFMA) method was used to eliminate or reduce the possibility of failure when viewed from the failure causes. This method integrates the severity, occurrence, detection, and expected cost criteria obtained from depth interview with the head of the production department as an expert. The AHP approach was used to formulate the priority ranking of the cause of failure in the milk production process. At level 1, the severity has the highest weight of 0.41 or 41% compared to other criteria. While at level 2, identifying failure in the UHT milk production process, the most potential cause was the average mixing temperature of more than 70 °C which was higher than the standard temperature (≤70 ° C). This failure cause has a contributes weight of 0.47 or 47% of all criteria Therefore, this study suggested the company to control the mixing temperature to minimise or eliminate the failure in this process.

An electrohydrodynamic technique for rapid mixing in stationary droplets on digital microfluidic platforms.

PubMed

Samiei, Ehsan; de Leon Derby, Maria Diaz; den Berg, Andre Van; Hoorfar, Mina

2017-01-17

This paper presents an electrohydrodynamic technique for rapid mixing of droplets in open and closed digital microfluidic (DMF) platforms. Mixing is performed by applying a high frequency AC voltage to the coplanar or parallel electrodes, inducing circulation zones inside the droplet which results in rapid mixing of the content. The advantages of the proposed method in comparison to conventional mixing methods that operate based on transporting the droplet back and forth and side to side include 1) a shorter mixing time (as fast as 0.25 s), 2) the use of a fewer number of electrodes, reducing the size of the chip, and 3) the stationary nature of the technique which reduces the chance of cross-contamination and surface biofouling. Mixing using the proposed method is performed to create a uniform mixture after merging a water droplet with another droplet containing either particles or dye. The results show that increasing the frequency, and or the amplitude of the applied voltage, enhances the mixing process. However, actuation with a very high frequency and voltage may result in shedding pico-liter satellite droplets. Therefore, for each frequency there is an effective range of the amplitude which provides rapid mixing and avoids shedding satellite droplets. Also, the increase in the gap height between the two plates (for the closed DMF platforms) significantly enhances the mixing efficiency due to the lower viscous effects. Effects of the addition of salts and DNA to the samples were also studied. The electrothermal effect decreased for these cases, which was solved by increasing the frequency of the applied voltage. To assure the high frequency actuation does not increase the sample temperature excessively, the temperature change was monitored using a thermal imaging camera and it was found that the increase in temperature is negligible.

The determination of optimum condition in water hyacinth drying process by mixed adsorption drying method and modified fly ash as an adsorbent

NASA Astrophysics Data System (ADS)

Saputra, Asep Handaya; Putri, Rizky Anggreini

2017-05-01

Water hyacinth is an aquatic weed that has a very fast growth which makes it becomes a problem to the ecosystem. On the other hand, water hyacinth has a high fiber content (up to 20% by weight) which makes it potential to become raw material for composites and textile industries. As an aquatic plant, water hyacinth has a high initial moisture content that reaches more than 90%. Meanwhile the moisture content of fiber as a raw material for composite and textile industry should not be more than 10% to maintain the good quality of the products. Mixed adsorption drying method is one of the innovative method that can replace conventional drying process. Fluidization method which has been commonly used in agricultural and pharmaceutical products drying, can be enhanced by combining it with the adsorption method as performed in this study. In mixed fluidization-adsorption drying method, fly ash as adsorbent and water hyacinth fiber were put together into the fluidization column where the drying air evaporate the moisture content in water hyacinth fiber. In addition, the adsorbent adsorb the moisture content in the drying air to make the moisture content of the drying air remain low. The drying process is performed in various temperature and composition of water hyacinth and adsorbent in order to obtain the optimum drying condition. In addition, the effect of fly ash pellet and fly ash powder to the drying process was also performed. The result shows that the higher temperature and the more amount of adsorbent results in the faster drying rate. Fly ash pellet shows a better adsorption since it has a smaller pore diameter and wider surface area. The optimum temperature obtained from this study is 60°C and the optimum ratio of water hyacinth and fly ash is 50:50.

Accelerated Learning: Madness with a Method.

ERIC Educational Resources Information Center

Zemke, Ron

1995-01-01

Accelerated learning methods have evolved into a variety of holistic techniques that involve participants in the learning process and overcome negative attitudes about learning. These components are part of the mix: the brain, learning environment, music, imaginative activities, suggestion, positive mental state, the arts, multiple intelligences,…

In-line and Real-time Monitoring of Resonant Acoustic Mixing by Near-infrared Spectroscopy Combined with Chemometric Technology for Process Analytical Technology Applications in Pharmaceutical Powder Blending Systems.

PubMed

Tanaka, Ryoma; Takahashi, Naoyuki; Nakamura, Yasuaki; Hattori, Yusuke; Ashizawa, Kazuhide; Otsuka, Makoto

2017-01-01

Resonant acoustic ® mixing (RAM) technology is a system that performs high-speed mixing by vibration through the control of acceleration and frequency. In recent years, real-time process monitoring and prediction has become of increasing interest, and process analytical technology (PAT) systems will be increasingly introduced into actual manufacturing processes. This study examined the application of PAT with the combination of RAM, near-infrared spectroscopy, and chemometric technology as a set of PAT tools for introduction into actual pharmaceutical powder blending processes. Content uniformity was based on a robust partial least squares regression (PLSR) model constructed to manage the RAM configuration parameters and the changing concentration of the components. As a result, real-time monitoring may be possible and could be successfully demonstrated for in-line real-time prediction of active pharmaceutical ingredients and other additives using chemometric technology. This system is expected to be applicable to the RAM method for the risk management of quality.

Developments in hydrogenation technology for fine-chemical and pharmaceutical applications.

PubMed

Machado, R M; Heier, K R; Broekhuis, R R

2001-11-01

The continuous innovation in hydrogenation technology is testimony to its growing importance in the manufacture of specialty and fine chemicals. New developments in equipment, process intensification and catalysis represent major themes that have undergone recent advances. Developments in chiral catalysis, methods to support and fix homogeneous catalysts, novel reactor and mixing technology, high-throughput screening, supercritical processing, spectroscopic and electrochemical online process monitoring, monolithic and structured catalysts, and sonochemical activation methods illustrate the scope and breadth of evolving technology applied to hydrogenation.

Cochrane Qualitative and Implementation Methods Group guidance series-paper 5: methods for integrating qualitative and implementation evidence within intervention effectiveness reviews.

PubMed

Harden, Angela; Thomas, James; Cargo, Margaret; Harris, Janet; Pantoja, Tomas; Flemming, Kate; Booth, Andrew; Garside, Ruth; Hannes, Karin; Noyes, Jane

2018-05-01

The Cochrane Qualitative and Implementation Methods Group develops and publishes guidance on the synthesis of qualitative and mixed-method evidence from process evaluations. Despite a proliferation of methods for the synthesis of qualitative research, less attention has focused on how to integrate these syntheses within intervention effectiveness reviews. In this article, we report updated guidance from the group on approaches, methods, and tools, which can be used to integrate the findings from quantitative studies evaluating intervention effectiveness with those from qualitative studies and process evaluations. We draw on conceptual analyses of mixed methods systematic review designs and the range of methods and tools that have been used in published reviews that have successfully integrated different types of evidence. We outline five key methods and tools as devices for integration which vary in terms of the levels at which integration takes place; the specialist skills and expertise required within the review team; and their appropriateness in the context of limited evidence. In situations where the requirement is the integration of qualitative and process evidence within intervention effectiveness reviews, we recommend the use of a sequential approach. Here, evidence from each tradition is synthesized separately using methods consistent with each tradition before integration takes place using a common framework. Reviews which integrate qualitative and process evaluation evidence alongside quantitative evidence on intervention effectiveness in a systematic way are rare. This guidance aims to support review teams to achieve integration and we encourage further development through reflection and formal testing. Copyright © 2017 Elsevier Inc. All rights reserved.

ICU Telemedicine Comanagement Methods and Length of Stay.

PubMed

Hawkins, Helen A; Lilly, Craig M; Kaster, David A; Groves, Robert H; Khurana, Hargobind

2016-08-01

Studies have identified processes that are associated with more favorable length of stay (LOS) outcomes when an ICU telemedicine program is implemented. Despite these studies, the relation of the acceptance of ICU telemedicine management services by individual ICUs to LOS outcomes is unknown. This is a single ICU telemedicine center study that compares LOS outcomes among three groups of intensivist-staffed mixed medical-surgical ICUs that used alternative comanagement strategies. The proportion of provider orders recorded by an ICU telemedicine provider to all recorded orders was compared among ICUs that used a monitor and notify comanagement approach, a direct intervention with timely notification process, and ICUs that used a mix of these two approaches. The primary outcome was acuity-adjusted hospital LOS. ICUs that used the direct intervention with timely notification strategy had a significantly larger proportion of provider orders recorded by ICU telemedicine physicians than the mixed methods of comanagement group, which had a larger proportion than ICUs that used the monitor and notify method (P < .001). Acuity-adjusted hospital LOS was significantly lower for the direct intervention with timely notification comanagement strategy (0.68; 0.65-0.70) compared with the mixed methods group (0.70 [0.69-0.72]; P = .01), which was significantly lower than the monitor and notify group (0.83 [0.80-0.86]; P < .001). Direct intervention with timely notification strategies of ICU telemedicine comanagement were associated with shorter LOS outcomes than monitor and notify comanagement strategies. Copyright © 2016 American College of Chest Physicians. Published by Elsevier Inc. All rights reserved.

Acetic Acid Bacteria and the Production and Quality of Wine Vinegar

PubMed Central

Torija, María Jesús; García-Parrilla, María del Carmen; Troncoso, Ana María

2014-01-01

The production of vinegar depends on an oxidation process that is mainly performed by acetic acid bacteria. Despite the different methods of vinegar production (more or less designated as either “fast” or “traditional”), the use of pure starter cultures remains far from being a reality. Uncontrolled mixed cultures are normally used, but this review proposes the use of controlled mixed cultures. The acetic acid bacteria species determine the quality of vinegar, although the final quality is a combined result of technological process, wood contact, and aging. This discussion centers on wine vinegar and evaluates the effects of these different processes on its chemical and sensory properties. PMID:24574887

A Mixed Prioritization Operators Strategy Using A Single Measurement Criterion For AHP Application Development

NASA Astrophysics Data System (ADS)

Yuen, Kevin Kam Fung

2009-10-01

The most appropriate prioritization method is still one of the unsettled issues of the Analytic Hierarchy Process, although many studies have been made and applied. Interestingly, many AHP applications apply only Saaty's Eigenvector method as many studies have found that this method may produce rank reversals and have proposed various prioritization methods as alternatives. Some methods have been proved to be better than the Eigenvector method. However, these methods seem not to attract the attention of researchers. In this paper, eight important prioritization methods are reviewed. A Mixed Prioritization Operators Strategy (MPOS) is developed to select a vector which is prioritized by the most appropriate prioritization operator. To verify this new method, a case study of high school selection is revised using the proposed method. The contribution is that MPOS is useful for solving prioritization problems in the AHP.

Structural dynamics of ribosome subunit association studied by mixing-spraying time-resolved cryo-EM

PubMed Central

Chen, Bo; Kaledhonkar, Sandip; Sun, Ming; Shen, Bingxin; Lu, Zonghuan; Barnard, David; Lu, Toh-Ming; Gonzalez, Ruben L.; Frank, Joachim

2015-01-01

Ribosomal subunit association is a key checkpoint in translation initiation, but its structural dynamics are poorly understood. Here, we used a recently developed mixing-spraying, time-resolved, cryogenic electron microscopy (cryo-EM) method to study ribosomal subunit association in the sub-second time range. We have improved this method and increased the cryo-EM data yield by tenfold. Pre-equilibrium states of the association reaction were captured by reacting the mixture of ribosomal subunits for 60 ms and 140 ms. We also identified three distinct ribosome conformations in the associated ribosomes. The observed proportions of these conformations are the same in these two time points, suggesting that ribosomes equilibrate among the three conformations within less than 60 ms upon formation. Our results demonstrate that the mixing-spraying method can capture multiple states of macromolecules during a sub-second reaction. Other fast processes, such as translation initiation, decoding and ribosome recycling, are amenable to study with this method. PMID:26004440

A novel algorithm for laser self-mixing sensors used with the Kalman filter to measure displacement

NASA Astrophysics Data System (ADS)

Sun, Hui; Liu, Ji-Gou

2018-07-01

This paper proposes a simple and effective method for estimating the feedback level factor C in a self-mixing interferometric sensor. It is used with a Kalman filter to retrieve the displacement. Without the complicated and onerous calculation process of the general C estimation method, a final equation is obtained. Thus, the estimation of C only involves a few simple calculations. It successfully retrieves the sinusoidal and aleatory displacement by means of simulated self-mixing signals in both weak and moderate feedback regimes. To deal with the errors resulting from noise and estimate bias of C and to further improve the retrieval precision, a Kalman filter is employed following the general phase unwrapping method. The simulation and experiment results show that the retrieved displacement using the C obtained with the proposed method is comparable to the joint estimation of C and α. Besides, the Kalman filter can significantly decrease measurement errors, especially the error caused by incorrectly locating the peak and valley positions of the signal.

How and Why Do IT Entrepreneurs Leave Their Salaried Employment to Start a SME? A Mixed Methods Research Design

NASA Astrophysics Data System (ADS)

Mourmant, Gaëtan

This method paper addresses an untapped but important type of IT turnover: IT entrepreneurship. We seek to develop a mixed methods research (MMR) design to understand the factors and processes that influence turnover behavior of prospective (nascent) IT entrepreneurs. To do this, we review two prior streams of research: the entrepreneurship literature and IT employee turnover. We incorporate the results of this literature review into a conceptual framework describing how the relevant factors leading to entrepreneurial and turnover behavior change over time, either gradually or suddenly, in response to specific events. In addition, we also contribute to the research by arguing that mixed methods research (MMR) is appropriate to bridge the gap between entrepreneurial literature and the IT turnover literature. A third important contribution is the design of the MMR, combining a longitudinal approach with a retrospective approach; a qualitative with a quantitative approach and, the exploratory design with the triangulation design [1]. Finally, we discuss practical implications for IT managers and IT entrepreneurs.

Development studies of a novel wet oxidation process

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rogers, T.W.; Dooge, P.M.

1996-12-31

The objective of this study is to develop a novel catalytic chemical oxidation process that can be used to effectively treat multi-component wastes with a minimum of pretreatment characterization, thus providing a versatile, non-combustion method which will destroy hazardous organic compounds while simultaneously containing and concentrating toxic and radioactive metals for recovery or disposal in a readily stabilized matrix. Although the DETOX{sup SM} process had been tested to a limited extent for potential application to mixed wastes, there had not been sufficient experience with the process to determine its range of application to multicomponent waste forms. The potential applications ofmore » the process needed to be better identified. Then, the process needed to be demonstrated on wastes and remediate types on a practical scale in order that data could be obtained on application range, equipment size, capital and operating costs, effectiveness, safety, reliability, permittability, and potential commercial applications of the process. The approach for the project was, therefore, to identify the potential range of applications of the process (Phase I), to choose demonstration sites and design a demonstration prototype (Phase II), to fabricate and shakedown the demonstration unit (Phase III), then finally to demonstrate the process on surrogate hazardous and mixed wastes, and on actual mixed wastes (Phase IV).« less

Method of solution preparation of polyolefin class polymers for electrospinning processing included

NASA Technical Reports Server (NTRS)

Rabolt, John F. (Inventor); Givens, Steven R. (Inventor); Lee, Keun-Hyung (Inventor)

2011-01-01

A process to make a polyolefin fiber which has the following steps: mixing at least one polyolefin into a solution at room temperature or a slightly elevated temperature to form a polymer solution and electrospinning at room temperature said polymer solution to form a fiber.

Intragroup Processes and Teamwork within a Successful Chamber Choir

ERIC Educational Resources Information Center

Kirrane, Melrona; O'Connor, Cliodhna; Dunne, Ann-Marie; Moriarty, Patricia

2017-01-01

Despite the ubiquity of choirs across time and cultures, relatively little is known about the internal dynamics of these social systems. This article examines the group processes involved in a small European chamber choir. The research adopted a mixed-methods qualitative approach that combined individual interviews (n = 13) with ethnographic…

An Investigation of Comprehension Processes among Adolescent English Learners with Reading Difficulties

ERIC Educational Resources Information Center

Lesaux, Nonie K.; Harris, Julie Russ

2017-01-01

This mixed-methods study examines the reading skills and processes of early adolescent Latino English learners demonstrating below-average reading comprehension performance (N = 41, mean age = 13 years). Standardized measures were used to estimate participants' word reading and vocabulary knowledge, and interviews were conducted to examine reading…

Information Loss: Exploring the Information Systems Management's Neglect Affecting Softcopy Reproduction of Heritage-Data

ERIC Educational Resources Information Center

Oskooie, Kamran Rezai

2012-01-01

This exploratory mixed methods study quantified and explored leadership interest in legacy-data conversion and information processing. Questionnaires were administered electronically to 92 individuals in design, manufacturing, and other professions from the manufacturing, processing, Internet, computing, software and technology divisions. Research…

Learners' Internal Management of Cognitive Processing in Online Learning

ERIC Educational Resources Information Center

Chen, C.-Y.; Pedersen, S.

2012-01-01

This study examined students' internal management of their cognitive processing in an interactive online class. A mixed methods approach was used to explore students' strategy use in online discussions. The focus is on examining individual knowledge construction through active cognitive engagement, rather than the social interactions, in the…

[Not Available].

PubMed

Paturzo, Marco; Colaceci, Sofia; Clari, Marco; Mottola, Antonella; Alvaro, Rosaria; Vellone, Ercole

2016-01-01

. Mixed methods designs: an innovative methodological approach for nursing research. The mixed method research designs (MM) combine qualitative and quantitative approaches in the research process, in a single study or series of studies. Their use can provide a wider understanding of multifaceted phenomena. This article presents a general overview of the structure and design of MM to spread this approach in the Italian nursing research community. The MM designs most commonly used in the nursing field are the convergent parallel design, the sequential explanatory design, the exploratory sequential design and the embedded design. For each method a research example is presented. The use of MM can be an added value to improve clinical practices as, through the integration of qualitative and quantitative methods, researchers can better assess complex phenomena typical of nursing.

Clouding tracing: Visualization of the mixing of fluid elements in convection-diffusion systems

NASA Technical Reports Server (NTRS)

Ma, Kwan-Liu; Smith, Philip J.

1993-01-01

This paper describes a highly interactive method for computer visualization of the basic physical process of dispersion and mixing of fluid elements in convection-diffusion systems. It is based on transforming the vector field from a traditionally Eulerian reference frame into a Lagrangian reference frame. Fluid elements are traced through the vector field for the mean path as well as the statistical dispersion of the fluid elements about the mean position by using added scalar information about the root mean square value of the vector field and its Lagrangian time scale. In this way, clouds of fluid elements are traced and are not just mean paths. We have used this method to visualize the simulation of an industrial incinerator to help identify mechanisms for poor mixing.

Experiments in mixed reality

NASA Astrophysics Data System (ADS)

Krum, David M.; Sadek, Ramy; Kohli, Luv; Olson, Logan; Bolas, Mark

2010-01-01

As part of the Institute for Creative Technologies and the School of Cinematic Arts at the University of Southern California, the Mixed Reality lab develops technologies and techniques for presenting realistic immersive training experiences. Such experiences typically place users within a complex ecology of social actors, physical objects, and collections of intents, motivations, relationships, and other psychological constructs. Currently, it remains infeasible to completely synthesize the interactivity and sensory signatures of such ecologies. For this reason, the lab advocates mixed reality methods for training and conducts experiments exploring such methods. Currently, the lab focuses on understanding and exploiting the elasticity of human perception with respect to representational differences between real and virtual environments. This paper presents an overview of three projects: techniques for redirected walking, displays for the representation of virtual humans, and audio processing to increase stress.

Methods for Retrievals of CO2 Mixing Ratios from JPL Laser Absorption Spectrometer Flights During a Summer 2011 Campaign

NASA Technical Reports Server (NTRS)

Menzies, Robert T.; Spiers, Gary D.; Jacob, Joseph C.

2013-01-01

The JPL airborne Laser Absorption Spectrometer instrument has been flown several times in the 2007-2011 time frame for the purpose of measuring CO2 mixing ratios in the lower atmosphere. This instrument employs CW laser transmitters and coherent detection receivers in the 2.05- micro m spectral region. The Integrated Path Differential Absorption (IPDA) method is used to retrieve weighted CO2 column mixing ratios. We present key features of the evolving LAS signal processing and data analysis algorithms and the calibration/validation methodology. Results from 2011 flights in various U.S. locations include observed mid-day CO2 drawdown in the Midwest and high spatial resolution plume detection during a leg downwind of the Four Corners power plant in New Mexico.

Fermentative process for making inorganic nanoparticles

DOEpatents

Phelps, Tommy J.; Lauf, Robert J.; Moon, Ji-Won; Roh, Yul

2006-06-13

A method for producing mixed metal oxide compounds includes the steps of: providing a supply of a metal reducing bacteria; providing a culture medium suitable for growth of the bacteria; providing a first mixed metal oxide phase comprising at least a first and a second metal, at least one of the first and second metal being reducible from a higher to a lower oxidation state by the bacteria; and, combining the bacteria, the culture medium, the first mixed metal oxide, and at least one electron donor in a reactor, wherein the bacteria reduces at least one of the first metal and the second metal from the higher to the lower oxidation state to form a second mixed metal oxide phase.

CFD-based optimization in plastics extrusion

NASA Astrophysics Data System (ADS)

Eusterholz, Sebastian; Elgeti, Stefanie

2018-05-01

This paper presents novel ideas in numerical design of mixing elements in single-screw extruders. The actual design process is reformulated as a shape optimization problem, given some functional, but possibly inefficient initial design. Thereby automatic optimization can be incorporated and the design process is advanced, beyond the simulation-supported, but still experience-based approach. This paper proposes concepts to extend a method which has been developed and validated for die design to the design of mixing-elements. For simplicity, it focuses on single-phase flows only. The developed method conducts forward-simulations to predict the quasi-steady melt behavior in the relevant part of the extruder. The result of each simulation is used in a black-box optimization procedure based on an efficient low-order parameterization of the geometry. To minimize user interaction, an objective function is formulated that quantifies the products' quality based on the forward simulation. This paper covers two aspects: (1) It reviews the set-up of the optimization framework as discussed in [1], and (2) it details the necessary extensions for the optimization of mixing elements in single-screw extruders. It concludes with a presentation of first advances in the unsteady flow simulation of a metering and mixing section with the SSMUM [2] using the Carreau material model.

Mixing Study in a Multi-dimensional Motion Mixer

NASA Astrophysics Data System (ADS)

Shah, R.; Manickam, S. S.; Tomei, J.; Bergman, T. L.; Chaudhuri, B.

2009-06-01

Mixing is an important but poorly understood aspect in petrochemical, food, ceramics, fertilizer and pharmaceutical processing and manufacturing. Deliberate mixing of granular solids is an essential operation in the production of industrial powder products usually constituted from different ingredients. The knowledge of particle flow and mixing in a blender is critical to optimize the design and operation. Since performance of the product depends on blend homogeneity, the consequence of variability can be detrimental. A common approach to powder mixing is to use a tumbling blender, which is essentially a hollow vessel horizontally attached to a rotating shaft. This single axis rotary blender is one of the most common batch mixers among in industry, and also finds use in myriad of application as dryers, kilns, coaters, mills and granulators. In most of the rotary mixers the radial convection is faster than axial dispersion transport. This slow dispersive process hinders mixing performance in many blending, drying and coating applications. A double cone mixer is designed and fabricated which rotates around two axes, causing axial mixing competitive to its radial counterpart. Discrete Element Method (DEM) based numerical model is developed to simulate the granular flow within the mixer. Digitally recorded mixing states from experiments are used to fine tune the numerical model. Discrete pocket samplers are also used in the experiments to quantify the characteristics of mixing. A parametric study of the effect of vessel speeds, relative rotational speed (between two axes of rotation), on the granular mixing is investigated by experiments and numerical simulation. Incorporation of dual axis rotation enhances axial mixing by 60 to 85% in comparison to single axis rotation.

Sonocatalytic degradation of azo fuchsine in the presence of the Co-doped and Cr-doped mixed crystal TiO2 powders and comparison of their sonocatalytic activities.

PubMed

Wang, Jun; Lv, Yanhui; Zhang, Zhaohong; Deng, Yingqiao; Zhang, Liquan; Liu, Bin; Xu, Rui; Zhang, Xiangdong

2009-10-15

In order to degrade some pollutants effectively under ultrasonic irradiation, the Co-doped and Cr-doped mixed crystal TiO(2) powders, with high sonocatalytic activity, were prepared as sonocatalyst. The Co-doped and Cr-doped mixed crystal TiO(2) powders as sonocatalyst were prepared through sol-gel and heat-treated methods from tetrabutylorthotitanate, and then were characterized by XRD and TG-DTA technologies. In order to compare and evaluate the sonocatalytic activity of the Co-doped and Cr-doped mixed crystal TiO(2) powders, the low power ultrasound was as an irradiation source and the azo fuchsine was chosen as a model compound to be degraded. The degradation process was investigated by UV-vis, TOC, ion chromatogram and HPLC techniques. The results indicated that the sonocatalytic activity of Cr-doped mixed crystal TiO(2) powder was higher than that of Co-doped and undoped mixed crystal TiO(2) powder during the sonocatalytic degradation of the azo fuchsine in aqueous solution. These results may be of great significance for driving sonocatalytic method to treat non- or low-transparent industrial wastewaters.

Active fluid mixing with magnetic microactuators for capture of salmonella

NASA Astrophysics Data System (ADS)

Hanasoge, S.; Owen, D.; Ballard, M.; Mills, Z.; Xu, J.; Erickson, M.; Hesketh, P. J.; Alexeev, A.

2016-05-01

Detection of low concentrations of bacteria in food samples is a challenging process. Key to this process is the separation of the target from the food matrix. We demonstrate magnetic beads and magnetic micro-cilia based microfluidic mixing and capture, which are particularly useful for pre-concentrating the target. The first method we demonstrate makes use of magnetic microbeads held on to NiFe discs on the surface of the substrate. These beads are rotated around the magnetic discs by rotating the external magnetic field. The second method we demonstrate shows the use of cilia which extends into the fluid and is manipulated by a rotating external field. Magnetic micro-features were fabricated by evaporating NiFe alloy at room temperature, on to patterned photoresist. The high magnetic permeability of NiFe allows for maximum magnetic force on the features. The magnetic features were actuated using an external rotating magnet up to frequencies of 50Hz. We demonstrate active mixing produced by the microbeads and the cilia in a microchannel. Also, we demonstrate the capture of target species in a sample using microbeads.

Process for improving the energy density of feedstocks using formate salts

DOEpatents

Wheeler, Marshall Clayton; van Heiningen, Adriaan R.P.; Case, Paige A.

2015-09-01

Methods of forming liquid hydrocarbons through thermal deoxygenation of cellulosic compounds are disclosed. Aspects cover methods including the steps of mixing a levulinic acid salt-containing feedstock with a formic acid salt, exposing the mixture to a high temperature condition to form hydrocarbon vapor, and condensing the hydrocarbon vapor to form liquid hydrocarbons, where both the formic acid salt and the levulinic acid salt-containing feedstock decompose at the high temperature condition and wherein one or more of the mixing, exposing, and condensing steps is carried out a pressure between about vacuum and about 10 bar.

Polymeric compositions and their method of manufacture. [forming filled polymer systems using cryogenics

NASA Technical Reports Server (NTRS)

Moser, B. G.; Landel, R. F. (Inventor)

1972-01-01

Filled polymer compositions are made by dissolving the polymer binder in a suitable sublimable solvent, mixing the filler material with the polymer and its solvent, freezing the resultant mixture, and subliming the frozen solvent from the mixture from which it is then removed. The remaining composition is suitable for conventional processing such as compression molding or extruding. A particular feature of the method of manufacture is pouring the mixed solution slowly in a continuous stream into a cryogenic bath wherein frozen particles of the mixture result. The frozen individual particles are then subjected to the sublimation.

7 CFR 58.619 - Mix processing room.

Code of Federal Regulations, 2013 CFR

2013-01-01

... 7 Agriculture 3 2013-01-01 2013-01-01 false Mix processing room. 58.619 Section 58.619 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....619 Mix processing room. The rooms used for combining mix ingredients and processing the mix shall...

7 CFR 58.619 - Mix processing room.

Code of Federal Regulations, 2014 CFR

2014-01-01

... 7 Agriculture 3 2014-01-01 2014-01-01 false Mix processing room. 58.619 Section 58.619 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....619 Mix processing room. The rooms used for combining mix ingredients and processing the mix shall...

7 CFR 58.619 - Mix processing room.

Code of Federal Regulations, 2012 CFR

2012-01-01

... 7 Agriculture 3 2012-01-01 2012-01-01 false Mix processing room. 58.619 Section 58.619 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards....619 Mix processing room. The rooms used for combining mix ingredients and processing the mix shall...

Transverse mixing of ellipsoidal particles in a rotating drum

NASA Astrophysics Data System (ADS)

He, Siyuan; Gan, Jieqing; Pinson, David; Zhou, Zongyan

2017-06-01

Rotating drums are widely used in industry for mixing, milling, coating and drying processes. In the past decades, mixing of granular materials in rotating drums has been extensively investigated, but most of the studies are based on spherical particles. Particle shape has an influence on the flow behaviour and thus mixing behaviour, though the shape effect has as-yet received limited study. In this work, discrete element method (DEM) is employed to study the transverse mixing of ellipsoidal particles in a rotating drum. The effects of aspect ratio and rotating speed on mixing quality and mixing rate are investigated. The results show that mixing index increases exponentially with time for both spheres and ellipsoids. Particles with various aspect ratios are able to reach well-mixed states after sufficient revolutions in the rolling or cascading regime. Ellipsoids show higher mixing rate when rotational speed is set between 25 and 40 rpm. The relationship between mixing rate and aspect ratio of ellipsoids is established, demonstrating that, particles with aspect ratios of 0.5 and 2.0 achieve the highest mixing rates. Increasing rotating speed from 15 rpm to 40 rpm does not necessarily increase the mixing speed of spheres, while monotonous increase is observed for ellipsoids.

Broadband photon pair generation in green fluorescent proteins through spontaneous four-wave mixing

PubMed Central

Shi, Siyuan; Thomas, Abu; Corzo, Neil V.; Kumar, Prem; Huang, Yuping; Lee, Kim Fook

2016-01-01

Recent studies in quantum biology suggest that quantum mechanics help us to explore quantum processes in biological system. Here, we demonstrate generation of photon pairs through spontaneous four-wave mixing process in naturally occurring fluorescent proteins. We develop a general empirical method for analyzing the relative strength of nonlinear optical interaction processes in five different organic fluorophores. Our results indicate that the generation of photon pairs in green fluorescent proteins is subject to less background noises than in other fluorophores, leading to a coincidence-to-accidental ratio ~145. As such proteins can be genetically engineered and fused to many biological cells, our experiment enables a new platform for quantum information processing in a biological environment such as biomimetic quantum networks and quantum sensors. PMID:27076032

Principal Selection: A National Study of Selection Criteria and Procedures

ERIC Educational Resources Information Center

Palmer, Brandon

2017-01-01

Despite empirical evidence correlating the role of the principal with student achievement, researchers have seldom scrutinized principal selection methods over the past 60 years. This mixed methods study investigated the processes by which school principals are selected. A national sample of top-level school district administrators was used to…

Principal Selection: A National Study of Selection Criteria and Procedures

ERIC Educational Resources Information Center

Palmer, Brandon

2016-01-01

Despite empirical evidence correlating the role of the principal with student achievement, researchers have seldom scrutinized principal selection methods over the past 60 years. This mixed methods study investigated the processes by which school principals are selected. A national sample of top-level school district administrators was used to…

Nursing Admission Practices to Discern "Fit": A Case Study Exemplar

ERIC Educational Resources Information Center

Sinutko, Jaime M.

2014-01-01

Admission to a baccalaureate nursing school in the United States is currently a challenging proposition for a variety of reasons. This research explored a holistic nursing school admission process at a small, private, baccalaureate college using a retrospective, mixed-method, approach. The holistic method included multiple admission criteria, both…

Three-dimensional Diffusive Strip Method

NASA Astrophysics Data System (ADS)

Martinez-Ruiz, Daniel; Meunier, Patrice; Duchemin, Laurent; Villermaux, Emmanuel

2016-11-01

The Diffusive Strip Method (DSM) is a near-exact numerical method developed for mixing computations at large Péclet number in two-dimensions. The method consists in following stretched material lines to compute a-posteriori the resulting scalar field is extended here to three-dimensional flows, following surfaces. We describe its 3D peculiarities, and show how it applies to a simple Taylor-Couette configuration with non-rotating boundary conditions at the top end, bottom and outer cylinder. This flow produces an elaborate, although controlled, steady 3D flow which relies on the Ekman pumping arising from the rotation of the inner cylinder is both studied experimentally, and numerically modeled. A recurrent two-cells structure appears formed by stream tubes shaped as nested tori. A scalar blob in the flow experiences a Lagrangian oscillating dynamics with stretchings and compressions, driving the mixing process, and yielding both rapidly-mixed and nearly pure-diffusive regions. A triangulated-surface method is developed to calculate the blob elongation and scalar concentration PDFs through a single variable computation along the advected blob surface, capturing the rich evolution observed in the experiments.

Lagrangian process attribution of isotopic variations in near-surface water vapour in a 30-year regional climate simulation over Europe

NASA Astrophysics Data System (ADS)

Dütsch, Marina; Pfahl, Stephan; Meyer, Miro; Wernli, Heini

2018-02-01

Stable water isotopes are naturally available tracers of moisture in the atmosphere. Due to isotopic fractionation, they record information about condensation and evaporation processes during the transport of air parcels, and therefore present a valuable means for studying the global water cycle. However, the meteorological processes driving isotopic variations are complex and not very well understood so far, in particular on short (hourly to daily) timescales. This study presents a Lagrangian method for attributing the isotopic composition of air parcels to meteorological processes, which provides new insight into the isotopic history of air parcels. It is based on the temporal evolution of the isotope ratios, the humidity, the temperature, and the location of the air parcels. Here these values are extracted along 7-day backward trajectories started every 6 hours from near the surface in a 30-year regional climate simulation over Europe with the isotope-enabled version of the model of the Consortium for Small-Scale Modelling (COSMOiso). The COSMOiso simulation has a horizontal resolution of 0.25° and is driven at the lateral boundaries by a T106 global climate simulation with the isotope-enabled version of the European Centre Hamburg model (ECHAMwiso). Both simulations are validated against measurements from the Global Network of Isotopes in Precipitation (GNIP), which shows that nesting COSMOiso within ECHAMwiso improves the representation of δ2H and deuterium excess in monthly accumulated precipitation. The method considers all isotopic changes that occur inside the COSMOiso model domain, which, on average, correspond to more than half of the mean and variability in both δ2H and deuterium excess at the air parcels' arrival points. Along every trajectory, the variations in the isotope values are quantitatively decomposed into eight process categories (evaporation from the ocean, evapotranspiration from land, mixing with moister air, mixing with drier air, liquid cloud formation, mixed phase cloud formation, ice cloud formation, and no process). The results show that for air parcels arriving over the ocean, evaporation from the ocean is the primary factor controlling δ2H and deuterium excess. Over land, evapotranspiration from land and mixing with moister air are similarly important. Liquid and mixed phase cloud formation contribute to the variability of δ2H and deuterium excess, especially over continental Europe. In summary, the presented method helps to better understand the linkage between the meteorological history of air parcels and their isotopic composition, and may support the interpretation of stable water isotope measurements in future.

The Removal of Turbidity and TSS of the Domestic Wastewater by Coagulation-Flocculation Process Involving Oyster Mushroom as Biocoagulant

NASA Astrophysics Data System (ADS)

Pardede, Astrid; Budihardjo, Mochamad Arief; Purwono

2018-02-01

Oyster mushroom (Pleurotus ostreatus) can be utilized as biocoagulant since it has chitin cell wall. Chitin has characteristics of bioactivity, biodegradability, absorption and could bind the metal ions. In this study, Oyster Mushroom is micronized and mixed with wastewater to treat turbidity and Total Suspended Solid (TSS) using coagulation-flocculation process employed jartest method. Various doses of Oyster mushroom, 600 mg/l, 1000 mg/l, and 2000 mg/l were tested in several rapid mixing rates which were 100 rpm, 125 rpm, and 150 rpm for 3 minutes followed by 12 minutes of slow mixing at 45 rpm. The mixture then was settled for 60 minutes with pH level maintained at 6-8. The result showed that the Oyster mushroom biocoagulant was able to remove 84% of turbidity and 90% of TSS. These reductions were achieved with biocoagulant dose of 600 mg/ L at 150 rpm mixing rate.

Physical Interpretation of Mixing Diagrams

NASA Astrophysics Data System (ADS)

Khain, Alexander; Pinsky, Mark; Magaritz-Ronen, L.

2018-01-01

Type of mixing at cloud edges is often determined by means of mixing diagrams showing the dependence of normalized cube of the mean volume radius on the dilution level. The mixing diagrams correspond to the final equilibrium state of mixing between two air volumes. While interpreting in situ measurements, scattering diagrams are plotted in which normalized droplet concentration is used instead of dilution level. Utilization of such scattering diagrams for interpretation of in situ observations faces significant difficulties and often leads to misinterpretation of the mixing process and to uncertain conclusions concerning the mixing type. In this study we analyze the scattering diagrams obtained by means of a Lagrangian-Eulerian model of a stratocumulus cloud. The model consists of 2,000 interacting Largangian parcels which mix with their neighbors during their motion in the atmospheric boundary layer. In the diagram, each parcel is denoted by a point. Changes of microphysical parameters of the parcel are represented by movements of the point in the scattering diagram. The method of plotting the scattering diagrams using the model is in many aspects similar to that used in in situ measurements. It is shown that a scattering diagram shows snapshots of a transient mixing process. The location of points in the scattering diagrams reflects largely the history and the origin of air parcels. Location of points on scattering diagram characterizes intensity of entrainment, and different parameters of droplet size distributions (DSDs) like concentration, mean volume (or effective) radius, and DSD width.

Approaching Etuaptmumk--introducing a consensus-based mixed method for health services research.

PubMed

Chatwood, Susan; Paulette, Francois; Baker, Ross; Eriksen, Astrid; Hansen, Ketil Lenert; Eriksen, Heidi; Hiratsuka, Vanessa; Lavoie, Josée; Lou, Wendy; Mauro, Ian; Orbinski, James; Pabrum, Nathalie; Retallack, Hanna; Brown, Adalsteinn

2015-01-01

With the recognized need for health systems' improvements in the circumpolar and indigenous context, there has been a call to expand the research agenda across all sectors influencing wellness and to recognize academic and indigenous knowledge through the research process. Despite being recognized as a distinct body of knowledge in international forums and across indigenous groups, examples of methods and theories based on indigenous knowledge are not well documented in academic texts or peer-reviewed literature on health systems. This paper describes the use of a consensus-based, mixed method with indigenous knowledge by an experienced group of researchers and indigenous knowledge holders who collaborated on a study that explored indigenous values underlying health systems stewardship. The method is built on the principles of Etuaptmumk or two-eyed seeing, which aim to respond to and resolve the inherent conflicts between indigenous ways of knowing and the scientific inquiry that informs the evidence base in health care. Mixed methods' frameworks appear to provide a framing suitable for research questions that require data from indigenous knowledge sources and western knowledge. The nominal consensus method, as a western paradigm, was found to be responsive to embedding of indigenous knowledge and allowed space to express multiple perspectives and reach consensus on the question at hand. Further utilization and critical evaluation of this mixed methodology with indigenous knowledge are required.

One pot synthesis of exchange coupled Nd2Fe14B/alpha-Fe by pechini type sol-gel method.

PubMed

Hussain, Abid; Jadhav, Abhijit P; Baek, Yeon Kyung; Choi, Hul Jin; Lee, Jaeho; Kang, Young Soo

2013-11-01

In this work, a combination of nanoparticles of Nd2Fe14B hard magnetic phase and alpha-Fe soft magnetic phase were synthesized by one pot chemical synthesis technique using sol-gel method. A gel of Nd-Fe-B was prepared using NdCl3 x 6H2O, FeCl3 x 6H2O, H3BO3, citric acid, and ethylene glycol by pechini type sol-gel method. The gel was subsequently calcined and annealed to obtain the mixed oxide powders. The produced metal oxide particles were identified with XRD, SEM, TEM to obtain the crystal structure, shape and domain structure of them. The nanoparticles of mixed phase of Nd2Fe14B/alpha-Fe were obtained from these oxides by a process of reduction-diffusion in vacuum by employing CaH2 as reducing agent. During this process it was optimized by controlling temperature, reaction time and concentration of the reducing agent (CaH2). The phase formation of Nd2Fe14B was resulted by the direct diffusion of NdH2, Fe and B. The magnetic property of produced hard and soft phases was successfully identified with vibrating sample magnetometer (VSM). The mixed domains of the hard and soft phases were identified with selected area electron diffraction method (SAED) patterns.

A new experimental design method to optimize formulations focusing on a lubricant for hydrophilic matrix tablets.

PubMed

Choi, Du Hyung; Shin, Sangmun; Khoa Viet Truong, Nguyen; Jeong, Seong Hoon

2012-09-01

A robust experimental design method was developed with the well-established response surface methodology and time series modeling to facilitate the formulation development process with magnesium stearate incorporated into hydrophilic matrix tablets. Two directional analyses and a time-oriented model were utilized to optimize the experimental responses. Evaluations of tablet gelation and drug release were conducted with two factors x₁ and x₂: one was a formulation factor (the amount of magnesium stearate) and the other was a processing factor (mixing time), respectively. Moreover, different batch sizes (100 and 500 tablet batches) were also evaluated to investigate an effect of batch size. The selected input control factors were arranged in a mixture simplex lattice design with 13 experimental runs. The obtained optimal settings of magnesium stearate for gelation were 0.46 g, 2.76 min (mixing time) for a 100 tablet batch and 1.54 g, 6.51 min for a 500 tablet batch. The optimal settings for drug release were 0.33 g, 7.99 min for a 100 tablet batch and 1.54 g, 6.51 min for a 500 tablet batch. The exact ratio and mixing time of magnesium stearate could be formulated according to the resulting hydrophilic matrix tablet properties. The newly designed experimental method provided very useful information for characterizing significant factors and hence to obtain optimum formulations allowing for a systematic and reliable experimental design method.

Using mixed-methods research to study the quality of life of coeliac women.

PubMed

Rodríguez Almagro, Julián; Hernández Martínez, Antonio; Solano Ruiz, María Carmen; Siles González, José

2017-04-01

To research the quality of life of Spanish women with coeliac disease. Women with coeliac disease express lower quality of life than men with coeliac disease. Explanatory sequential approach using mixed methods and with a gender perspective. The research was carried out between May and July 2015. In its quantitative stage, it aimed to determine the health-related quality of life in a representative sample (n = 1097) of Spanish adult women with coeliac disease using a specific questionnaire named Coeliac Disease-Quality of Life. In its qualitative phase, it aimed to describe the life experiences of a woman with coeliac disease in a qualitative manner by means of interviews (n = 19) with a semistructured script. Quantitative data were analysed using spss version 20 and presented in descriptive statistics. Qualitative data were analysed using the directed content analysis. The quantitative process gave us the values on the four aspects studied: dysphoria, disease limitations, health problems and inadequate treatment. These aspects allowed us to create a qualitative process, based on which we generated an interview, from which four larger categories emerged. These categories were feelings at diagnosis, limitations in day-to-day life, social perceptions of the disease and personal meanings of coeliac disease. Thus, both phases of our project are totally connected. There was a high level of congruence between quantitative scores and narratives. This study shows us the strong points of mixed-methods strategy in health sciences. The mixed-methods strategy gave us a wider view of the experience of women living with coeliac disease. In our case, a strength and not a limitation is having performed the quality of life study in women with coeliac disease using a mixed methodology, approaching the experience of being a woman with coeliac disease in Spain in two different but complementary ways. The quantitative and qualitative data allowed us to interpret the experiences of our participants. © 2016 John Wiley & Sons Ltd.

Do we really need a large number of particles to simulate bimolecular reactive transport with random walk methods? A kernel density estimation approach

NASA Astrophysics Data System (ADS)

Rahbaralam, Maryam; Fernàndez-Garcia, Daniel; Sanchez-Vila, Xavier

2015-12-01

Random walk particle tracking methods are a computationally efficient family of methods to solve reactive transport problems. While the number of particles in most realistic applications is in the order of 106-109, the number of reactive molecules even in diluted systems might be in the order of fractions of the Avogadro number. Thus, each particle actually represents a group of potentially reactive molecules. The use of a low number of particles may result not only in loss of accuracy, but also may lead to an improper reproduction of the mixing process, limited by diffusion. Recent works have used this effect as a proxy to model incomplete mixing in porous media. In this work, we propose using a Kernel Density Estimation (KDE) of the concentrations that allows getting the expected results for a well-mixed solution with a limited number of particles. The idea consists of treating each particle as a sample drawn from the pool of molecules that it represents; this way, the actual location of a tracked particle is seen as a sample drawn from the density function of the location of molecules represented by that given particle, rigorously represented by a kernel density function. The probability of reaction can be obtained by combining the kernels associated to two potentially reactive particles. We demonstrate that the observed deviation in the reaction vs time curves in numerical experiments reported in the literature could be attributed to the statistical method used to reconstruct concentrations (fixed particle support) from discrete particle distributions, and not to the occurrence of true incomplete mixing. We further explore the evolution of the kernel size with time, linking it to the diffusion process. Our results show that KDEs are powerful tools to improve computational efficiency and robustness in reactive transport simulations, and indicates that incomplete mixing in diluted systems should be modeled based on alternative mechanistic models and not on a limited number of particles.

Mixing Languages during Learning? Testing the One Subject-One Language Rule.

PubMed

Antón, Eneko; Thierry, Guillaume; Duñabeitia, Jon Andoni

2015-01-01

In bilingual communities, mixing languages is avoided in formal schooling: even if two languages are used on a daily basis for teaching, only one language is used to teach each given academic subject. This tenet known as the one subject-one language rule avoids mixing languages in formal schooling because it may hinder learning. The aim of this study was to test the scientific ground of this assumption by investigating the consequences of acquiring new concepts using a method in which two languages are mixed as compared to a purely monolingual method. Native balanced bilingual speakers of Basque and Spanish-adults (Experiment 1) and children (Experiment 2)-learnt new concepts by associating two different features to novel objects. Half of the participants completed the learning process in a multilingual context (one feature was described in Basque and the other one in Spanish); while the other half completed the learning phase in a purely monolingual context (both features were described in Spanish). Different measures of learning were taken, as well as direct and indirect indicators of concept consolidation. We found no evidence in favor of the non-mixing method when comparing the results of two groups in either experiment, and thus failed to give scientific support for the educational premise of the one subject-one language rule.

Mixing Languages during Learning? Testing the One Subject—One Language Rule

PubMed Central

2015-01-01

In bilingual communities, mixing languages is avoided in formal schooling: even if two languages are used on a daily basis for teaching, only one language is used to teach each given academic subject. This tenet known as the one subject-one language rule avoids mixing languages in formal schooling because it may hinder learning. The aim of this study was to test the scientific ground of this assumption by investigating the consequences of acquiring new concepts using a method in which two languages are mixed as compared to a purely monolingual method. Native balanced bilingual speakers of Basque and Spanish—adults (Experiment 1) and children (Experiment 2)—learnt new concepts by associating two different features to novel objects. Half of the participants completed the learning process in a multilingual context (one feature was described in Basque and the other one in Spanish); while the other half completed the learning phase in a purely monolingual context (both features were described in Spanish). Different measures of learning were taken, as well as direct and indirect indicators of concept consolidation. We found no evidence in favor of the non-mixing method when comparing the results of two groups in either experiment, and thus failed to give scientific support for the educational premise of the one subject—one language rule. PMID:26107624

Exploring communication processes in workplace meetings: A mixed methods study in a Swedish healthcare organization

PubMed Central

Bergman, Caroline; Dellve, Lotta; Skagert, Katrin

2016-01-01

BACKGROUND: An efficient team and a good organizational climate not only improve employee health but also the health and safety of the patients. Building up trust, a good organizational climate and a healthy workplace requires effective communication processes. In Sweden, workplace meetings as settings for communication processes are regulated by a collective labor agreement. However, little is known about how these meetings are organized in which communication processes can be strengthened. OBJECTIVE: The aim of this study was to explore communication processes during workplace meetings in a Swedish healthcare organization. METHODS: A qualitatively driven, mixed methods design was used with data collected by observations, interviews, focus group interviews and mirroring feedback seminars. Data were analyzed using descriptive statistics and conventional content analysis. RESULTS: The communication flow and the organization of the observed meetings varied in terms of physical setting, frequency, time allocated and duration. The topics for the workplace meetings were mainly functional with a focus on clinical processes. Overall, the meetings were viewed not only as an opportunity to communicate information top down but also a means by which employees could influence decision-making and development at the workplace. CONCLUSIONS: Workplace meetings have very distinct health-promoting value. It emerged that information and the opportunity to influence decisions related to workplace development are important to the workers. These aspects also affect the outcome of the care provided. PMID:27472854

The cement solidification systems at LANL

DOE Office of Scientific and Technical Information (OSTI.GOV)

Veazey, G.W.

1990-01-01

There are two major cement solidification systems at Los Alamos National Laboratory. Both are focused primarily around treating waste from the evaporator at TA-55, the Plutonium Processing Facility. The evaporator receives the liquid waste stream from TA-55's nitric acid-based, aqueous-processing operations and concentrates the majority of the radionuclides in the evaporator bottoms solution. This is sent to the TA-55 cementation system. The evaporator distillate is sent to the TA-50 facility, where the radionuclides are precipitated and then cemented. Both systems treat TRU-level waste, and so are operated according to the criteria for WIPP-destined waste, but they differ in both cementmore » type and mixing method. The TA-55 systems uses Envirostone, a gypsum-based cement and in-drum prop mixing; the TA-50 systems uses Portland cement and drum tumbling for mixing.« less

Mixed-effects Gaussian process functional regression models with application to dose-response curve prediction.

PubMed

Shi, J Q; Wang, B; Will, E J; West, R M

2012-11-20

We propose a new semiparametric model for functional regression analysis, combining a parametric mixed-effects model with a nonparametric Gaussian process regression model, namely a mixed-effects Gaussian process functional regression model. The parametric component can provide explanatory information between the response and the covariates, whereas the nonparametric component can add nonlinearity. We can model the mean and covariance structures simultaneously, combining the information borrowed from other subjects with the information collected from each individual subject. We apply the model to dose-response curves that describe changes in the responses of subjects for differing levels of the dose of a drug or agent and have a wide application in many areas. We illustrate the method for the management of renal anaemia. An individual dose-response curve is improved when more information is included by this mechanism from the subject/patient over time, enabling a patient-specific treatment regime. Copyright © 2012 John Wiley & Sons, Ltd.

The use of a non-nuclear density gauge for monitoring the compaction process of asphalt pavement

NASA Astrophysics Data System (ADS)

Van den bergh, Wim; Vuye, Cedric; Kara, Patricia; Couscheir, Karolien; Blom, Johan; Van Bouwel, Philippe

2017-09-01

The mechanical performance of an asphalt pavement affects its durability - thus carbon footprint. Many parameters contribute to the success of a durable asphalt mix, e.g. material selection, an accurate mix and even the road design in which the asphalt mix quality is quantified. The quality of the asphalt mix, by its mechanical properties, is also related to the compaction degree. However, and specifically for high volume rates, the laying process at the construction site needs an effective method to monitor and adjust immediately the compaction quality before cooling and without damaging the layer, which is now absent. In this paper the use of a non-nuclear density gauge (PQI - Pavement Quality Indicator) is evaluated, based on a site at Brussels Airport. Considering the outcome of the present research, this PQI is advised as a unique tool for continuous density measurements and allow immediate adjustments during compaction, and decreases the number of core drilling for quality control, and as a posteriori asphalt pavement density test where cores are prohibited. The use of PQI could be recommended to be a part of the standard quality control process in the Flemish region.

Reproducing scalar mixing of turbulent jets in a 3D periodic box

NASA Astrophysics Data System (ADS)

Rah, K. Jeff; Blanquart, Guillaume

2017-11-01

A triply periodic DNS is a convenient framework to analyze the turbulent mixing process, since it can produce statistically stationary turbulence. In addition, the periodic boundary condition makes it easy to compute the spatial spectra of scalars. However, it is difficult to create a realistic turbulent flow with such a geometry. In this current investigation, we aim to develop a method to simulate a realistic turbulent mixing process inside a 3D periodic box. The target real flow is an axisymmetric jet with passive scalars on its centerline. The velocity and scalar information of turbulent jets on the centerline is applied to the momentum equation and scalar transport equation in physical space. The result is the combination of a mean gradient term and a linear forcing term in the scalar equation. These new forcing terms are derived to replicate the scalar mixing properties of jets in a triply periodic DNS. The present analysis differs from other forcing schemes for their derivation process did not involve any use of the velocity or scalar information of a real turbulent flow. A set of DNS has been performed with the new forcing term, and various turbulent parameters and spectral relations are compared against experiments.

Application of FTA technology to extraction of sperm DNA from mixed body fluids containing semen.

PubMed

Fujita, Yoshihiko; Kubo, Shin-ichi

2006-01-01

FTA technology is a novel method designed to simplify the collection, shipment, archiving and purification of nucleic acids from a wide variety of biological sources. In this study, we report a rapid and simple method of extracting DNA from sperm when body fluids mixed with semen were collected using FTA cards. After proteinase K digestion of the sperm and body fluid mixture, the washed pellet suspension as the sperm fraction and the concentrated supernatant as the epithelial cell fraction were respectively applied to FTA cards containing DTT. The FTA cards were dried, then directly added to a polymerase chain reaction (PCR) mix and processed by PCR. The time required from separation of the mixed fluid into sperm and epithelial origin DNA extractions was only about 2.5-3h. Furthermore, the procedure was extremely simple. It is considered that our designed DNA extraction procedure using an FTA card is available for application to routine work.

Building Capacity of Occupational Therapy Practitioners to Address the Mental Health Needs of Children and Youth: A Mixed-Methods Study of Knowledge Translation.

PubMed

Bazyk, Susan; Demirjian, Louise; LaGuardia, Teri; Thompson-Repas, Karen; Conway, Carol; Michaud, Paula

2015-01-01

We explored the meaning and outcomes of a 6-mo building capacity process designed to promote knowledge translation of a public health approach to mental health among pediatric occupational therapy practitioners participating in a Community of Practice. A one-group (N = 117) mixed-methods design using a pretest-posttest survey and qualitative analysis of written reflections was used to explore the meaning and outcomes of the building capacity process. Statistically significant improvements (p < .02) in pretest-posttest scores of knowledge, beliefs, and actions related to a public health approach to mental health were found. Qualitative findings suggest that participation resulted in a renewed commitment to addressing children's mental health. The building capacity process expanded practitioner knowledge, renewed energy, and promoted confidence, resulting in change leaders empowered to articulate, advocate for, and implement practice changes reflecting occupational therapy's role in addressing children's mental health. Copyright © 2015 by the American Occupational Therapy Association, Inc.

The trees and the forest: mixed methods in the assessment of recovery based interventions' processes and outcomes in mental health.

PubMed

Hasson-Ohayon, Ilanit; Roe, David; Yanos, Philip T; Lysaker, Paul H

2016-12-01

Recent developments in mental health have emphasized recovery as an outcome for people with serious mental illness (SMI). Accordingly, several studies have attempted to evaluate the process and outcome of recovery-oriented psychosocial interventions. To review and discuss quantitative and qualitative findings from previous efforts to study the impact of five recovery-oriented interventions: Illness Management and Recovery (IMR), Narrative Enhancement and Cognitive Therapy (NECT), Supported Employment (SE), Supported Socialization (SS), and Family Psychoeducation. Reviewing the literature on studies that examine the effectiveness of these interventions by using both quantitative and qualitative approach. Qualitative findings in these studies augment quantitative findings and at times draw attention to unexpected findings and uniquely illuminate the effects of these interventions on self-reflective processes. There is a need for further exploration of how mixed-methods can be implemented to explore recovery-oriented outcomes. Critical questions regarding the implications of qualitative findings are posed.

Carer mentoring: a mixed methods investigation of a carer mentoring service.

PubMed

Greenwood, Nan; Habibi, Ruth

2014-03-01

Worldwide with ageing populations, the numbers of informal carers are likely to increase. Although being a carer is often satisfying, it can be challenging and require support. Volunteer-provided carer mentoring services where carers are supported by volunteer mentors are one such intervention. However, little is known about the impact of mentoring, carers' experiences or the mechanisms by which these schemes may work. Previous quantitative findings have been inconsistent suggesting a different, mixed methods approach using qualitative and quantitative methods may be valuable. Objectives were to explore two main questions: whether mentoring had a significant positive effect on carer mentees in terms of mental health, quality of life and confidence in caring and to explore how carers experience and perceive the process and benefits of mentoring. In addition, the study aimed to suggest possible mechanisms to understand how mentoring may benefit carers. Mixed methods (quantitative questionnaires and depth interviews) investigated an established mentoring service provided by volunteer mentors. During the study period, 28 carers received mentoring. Of these, 25 carers completed structured questionnaires both before and after mentoring, to determine whether mentoring had an impact on carer wellbeing and confidence in caring. Depth interviews were also undertaken with 11 purposively sampled carers to explore how carers experience and perceive the process and benefits of mentoring. Statistically significant improvements in carer anxiety (p<0.001), depression (p<0.001), quality of life (p=0.02) and confidence in caring (p<0.05 on all dimensions except one) were found. Depth interviews revealed that carers were very positive about mentoring and highlighted many benefits. Findings suggested emotional support, information provision, problem solving facilitation and gaining new perspectives may be mechanisms by which mentoring achieves positive outcomes. Mentor personal characteristics, experiences and training are possible facilitators of the process. Carer mentoring services can be a valuable form of carer support that falls somewhere between formal and informal support. Adopting mixed methods permitted greater understanding of how mentoring may benefit carers and has implications for mentor recruitment and training. The fact that mentoring can be provided by volunteer mentors makes it an attractive, potentially cost-effective means of supporting carers. Copyright © 2013 Elsevier Ltd. All rights reserved.

Thermal stir welding process

NASA Technical Reports Server (NTRS)

Ding, R. Jeffrey (Inventor)

2012-01-01

A welding method is provided for forming a weld joint between first and second elements of a workpiece. The method includes heating the first and second elements to form an interface of material in a plasticized or melted state interface between the elements. The interface material is then allowed to cool to a plasticized state if previously in a melted state. The interface material, while in the plasticized state, is then mixed, for example, using a grinding/extruding process, to remove any dendritic-type weld microstructures introduced into the interface material during the heating process.

Professionalism in Culinary Arts: Perceptions and Assessments for Training and Curricular Design

ERIC Educational Resources Information Center

Mack, Glenn R.

2012-01-01

The researcher designed this mixed-methods dissertation to delve further into the definition of professionalism for cooks and chefs within the culinary arts industry. The researcher also explored the process of professionalization (i.e., the process by which members attempt to transform their occupation into a profession) within the field of…

A Methodological Self-Study of Quantitizing: Negotiating Meaning and Revealing Multiplicity

ERIC Educational Resources Information Center

Seltzer-Kelly, Deborah; Westwood, Sean J.; Pena-Guzman, David M.

2012-01-01

This inquiry developed during the process of "quantitizing" qualitative data the authors had gathered for a mixed methods curriculum efficacy study. Rather than providing the intended rigor to their data coding process, their use of an intercoder reliability metric prompted their investigation of the multiplicity and messiness that, as they…

Developing a Web-Based Hiring Resource at a State Medical College

ERIC Educational Resources Information Center

Drane, Daniel, III

2017-01-01

This study uses a sequential, mixed method, action research, quantitative to qualitative research design. The purpose of this study was to develop a useful standardized hiring process at a state medical college that brings clarity to the hiring process and policies. Two conceptual frameworks guided the innovations in this study--communities of…

Changing Perceptions of Science in Undergraduate Students: A Mixed Methods Case Study

ERIC Educational Resources Information Center

Larson-Miller, Cindy S.

2011-01-01

The purpose of this bounded single-case study was to explore the understanding of the nature and process of science for undergraduate students at the University of Nebraska-Lincoln (UNL). The study investigated one professor's methodology to explicitly teach undergraduate students about the nature and process of science, and documented their…

Learning Processes in Blended Language Learning: A Mixed-Methods Approach

ERIC Educational Resources Information Center

Shahrokni, Seyed Abdollah; Talaeizadeh, Ali

2013-01-01

This article attempts to investigate the learning processes in blended language learning through assessing sources of information: logs, chat and forum scripts, and semi-structured interviews. Creating a MOODLE-based parallel component to face-to-face instruction for a group of EFL learners, we probed into 2,984 logged actions providing raw…

Language Processing in Arabic-English Bilinguals: A Mixed Methods Investigation

ERIC Educational Resources Information Center

Alsaigh, Tahani N.

2017-01-01

This study examines second language activation in Arabic-English bilinguals for whom Arabic was the first language. Modeling its design on Colome (2001), the research compared processing in a picture-phoneme matching task for Arabic-English bilinguals tested in the United States or in Saudi Arabia to determine whether activation of English…

Main processes of the Atlantic cold tongue interannual variability

NASA Astrophysics Data System (ADS)

Planton, Yann; Voldoire, Aurore; Giordani, Hervé; Caniaux, Guy

2018-03-01

The interannual variability of the Atlantic cold tongue (ACT) is studied by means of a mixed-layer heat budget analysis. A method to classify extreme cold and warm ACT events is proposed and applied to ten various analysis and reanalysis products. This classification allows 5 cold and 5 warm ACT events to be selected over the period 1982-2007. Cold (warm) ACT events are defined by the presence of negative (positive) sea surface temperature (SST) anomalies at the center of the equatorial Atlantic in late boreal spring, preceded by negative (positive) zonal wind stress anomalies in the western equatorial Atlantic. An ocean general circulation model capable of reconstructing the interannual variability of the ACT correctly is used to demonstrate that cold ACT events develop rapidly from May to June mainly due to intense cooling by vertical mixing and horizontal advection. The simulated cooling at the center of the basin is the result of the combined effects of non-local and local processes. The non-local process is an upwelling associated with an eastward-propagating Kelvin wave, which makes the mixed-layer more shallow and preconditions the upper layers to be cooled by an intense heat loss at the base of the mixed-layer, which is amplified by a stronger local injection of energy from the atmosphere. The early cooling by vertical mixing in March is also shown to be a good predictor of June cooling. In July, horizontal advection starts to warm the mixed-layer abnormally and damps SST anomalies. The advection anomalies, which result from changes in the horizontal temperature gradient, are associated in some cases with the propagation of Rossby waves along the equator. During warm ACT events, processes are reversed, generating positive SST anomalies: a downwelling Kelvin wave triggers stratification anomalies and mixed-layer depth anomalies, amplified by a weaker injection of energy from the atmosphere in May-June. In July, warm ACT events are abnormally cooled due to negative horizontal advection anomalies resulting from processes similar to those that occur during cold ACT events. This additional cooling process extends the period of cooling of the ACT, reducing SST anomalies.

Machine learning to construct reduced-order models and scaling laws for reactive-transport applications

NASA Astrophysics Data System (ADS)

Mudunuru, M. K.; Karra, S.; Vesselinov, V. V.

2017-12-01

The efficiency of many hydrogeological applications such as reactive-transport and contaminant remediation vastly depends on the macroscopic mixing occurring in the aquifer. In the case of remediation activities, it is fundamental to enhancement and control of the mixing through impact of the structure of flow field which is impacted by groundwater pumping/extraction, heterogeneity, and anisotropy of the flow medium. However, the relative importance of these hydrogeological parameters to understand mixing process is not well studied. This is partially because to understand and quantify mixing, one needs to perform multiple runs of high-fidelity numerical simulations for various subsurface model inputs. Typically, high-fidelity simulations of existing subsurface models take hours to complete on several thousands of processors. As a result, they may not be feasible to study the importance and impact of model inputs on mixing. Hence, there is a pressing need to develop computationally efficient models to accurately predict the desired QoIs for remediation and reactive-transport applications. An attractive way to construct computationally efficient models is through reduced-order modeling using machine learning. These approaches can substantially improve our capabilities to model and predict remediation process. Reduced-Order Models (ROMs) are similar to analytical solutions or lookup tables. However, the method in which ROMs are constructed is different. Here, we present a physics-informed ML framework to construct ROMs based on high-fidelity numerical simulations. First, random forests, F-test, and mutual information are used to evaluate the importance of model inputs. Second, SVMs are used to construct ROMs based on these inputs. These ROMs are then used to understand mixing under perturbed vortex flows. Finally, we construct scaling laws for certain important QoIs such as degree of mixing and product yield. Scaling law parameters dependence on model inputs are evaluated using cluster analysis. We demonstrate application of the developed method for model analyses of reactive-transport and contaminant remediation at the Los Alamos National Laboratory (LANL) chromium contamination sites. The developed method is directly applicable for analyses of alternative site remediation scenarios.

Electrochemical characterisation of air electrodes based on La 0.6Sr 0.4CoO 3 and carbon nanotubes

NASA Astrophysics Data System (ADS)

Thiele, Doreen; Züttel, Andreas

The efficiency of fuel cells suffers from the high activation polarisation at the cathode, where the oxygen reduction reaction takes place. In order to improve the performance, air electrodes composed of carbon nanotubes (CNTs) and the perovskite La 0.6Sr 0.4CoO 3 are produced by two different methods and investigated. In the first method CNTs are directly grown on the perovskite and in the second method CNTs and perovskite are combined by ultrasonic mixing. Their catalytic activity towards oxygen reduction in alkaline solution is evaluated by polarisation curves and electrochemical impedance spectroscopy. Best performance shows the electrode composed of 25 wt% CNTs, 55 wt% La 0.6Sr 0.4CoO 3 and 20 wt% PTFE as binder, produced by ultrasonic mixing. The Nyquist plot of this electrode displays two potential-dependent semi-circles, accounting for processes on the catalyst surface and for processes depending on the morphology of the electrode.

Analysis of mixing conditions and multistage irradiation impact on NOx removal efficiency in the electron beam flue gas treatment process.

PubMed

Pawelec, Andrzej; Dobrowolski, Andrzej

2017-01-01

In the process of electron beam flue gas treatment (EBFGT), most energy is spent on NO x removal. The dose distribution in the reactor is not uniform and the flue gas flow pattern plays an important role in the process efficiency. It was found that proper construction of the reactor may increase the energy efficiency of the process. The impact of the number of irradiation stages and mixing conditions on NO x removal efficiency was investigated for an ideal case and a practical solution was presented and compared with previously known EBFGT reactor constructions. The research was performed by means of computational fluid dynamics methods in combination with empirical Wittig formula. Two versions of dose distribution were taken for calculations. The results of the research show that for an ideal case, application of multistage irradiation and interstage mixing may reduce the energy consumption in the process by up to 39%. On the other side, simulation of reactor construction modification for two-stage irradiation results in 25% energy consumption reduction. The results of presented case study may be applied for improving the existing reactors and proper design of future installations.

GaSe1-xSx and GaSe1-xTex thick crystals for broadband terahertz pulses generation

NASA Astrophysics Data System (ADS)

Nazarov, M. M.; Yu. Sarkisov, S.; Shkurinov, A. P.; Tolbanov, O. P.

2011-08-01

We demonstrate the possibility of broadband THz pulse generation in mixed GaSe1-xSx and GaSe1-xTex crystals. The ordinary and extraordinary refractive indices of the crystals have been measured by the terahertz time-domain spectroscopy method, those values strongly influence the efficiency of THz generation process. The high birefringence and transparency of pure GaSe and mixed crystals allow optical rectification of femtosecond laser pulses in the several millimeters thick crystal using the еее interaction process (with two pumping waves and generated THz wave all having extraordinary polarization in the crystal).

Controlling lightwave in Riemann space by merging geometrical optics with transformation optics.

PubMed

Liu, Yichao; Sun, Fei; He, Sailing

2018-01-11

In geometrical optical design, we only need to choose a suitable combination of lenses, prims, and mirrors to design an optical path. It is a simple and classic method for engineers. However, people cannot design fantastical optical devices such as invisibility cloaks, optical wormholes, etc. by geometrical optics. Transformation optics has paved the way for these complicated designs. However, controlling the propagation of light by transformation optics is not a direct design process like geometrical optics. In this study, a novel mixed method for optical design is proposed which has both the simplicity of classic geometrical optics and the flexibility of transformation optics. This mixed method overcomes the limitations of classic optical design; at the same time, it gives intuitive guidance for optical design by transformation optics. Three novel optical devices with fantastic functions have been designed using this mixed method, including asymmetrical transmissions, bidirectional focusing, and bidirectional cloaking. These optical devices cannot be implemented by classic optics alone and are also too complicated to be designed by pure transformation optics. Numerical simulations based on both the ray tracing method and full-wave simulation method are carried out to verify the performance of these three optical devices.

Development of an on-line mixed-mode gel liquid chromatography×reversed phase liquid chromatography method for separation of water extract from Flos Carthami.

PubMed

Wang, Yu-Qing; Tang, Xu; Li, Jia-Fu; Wu, Yun-Long; Sun, Yu-Ying; Fang, Mei-Juan; Wu, Zhen; Wang, Xiu-Min; Qiu, Ying-Kun

2017-10-13

A novel on-line comprehensive two-dimensional liquid chromatography (2D-LC) method by coupling mixed-mode gel liquid chromatography (MMG-LC) with reversed phase liquid chromatography (RPLC) was developed. A mixture of 17 reference compounds was used to study the separation mechanism. A crude water extract of Flos Carthami was applied to evaluate the performance of the novel 2D-LC system. In the first dimension, the extract was eluted with a gradient of water/methanol over a cross-linked dextran gel Sephadex LH-20 column. Meanwhile, the advantages of size exclusion, reversed phase partition and adsorption separation mechanism were exploited before further on-line reversed phase purification on the second dimension. This novel on-line mixed-mode Sephadex LH-20×RPLC method provided higher peak resolution, sample processing ability (2.5mg) and better orthogonality (72.9%) versus RPLC×RPLC and hydrophilic interaction liquid chromatography (HILIC)×RPLC. To the best of our knowledge, this is the first report of a mixed-mode Sephadex LH-20×RPLC separation method with successful applications in on-line mode, which might be beneficial for harvesting targets from complicated medicinal plants. Copyright © 2017 Elsevier B.V. All rights reserved.

Size-controlled fabrication of zein nano/microparticles by modified anti-solvent precipitation with/without sodium caseinate

PubMed Central

Li, Feng; Chen, Yan; Liu, Shubo; Qi, Jian; Wang, Weiying; Wang, Chenhua; Zhong, Ruiyue; Chen, Zhijun; Li, Xiaoming; Guan, Yuanzhou; Kong, Wei; Zhang, Yong

2017-01-01

Zein-based nano/microparticles have been demonstrated to be promising carrier systems for both the food industry and biomedical applications. However, the fabrication of size-controlled zein particles has been a challenging issue. In this study, a modified anti-solvent precipitation method was developed, and the effects of various factors, such as mixing method, solvent/anti-solvent ratio, temperature, zein concentrations and the presence of sodium caseinate (SC) on properties of zein particles were investigated. Evidence is presented that, among the previously mentioned factors, the mixing method, especially mixing rate, could be used as an effective parameter to control the size of zein particles without changing other parameters. Moreover, through fine-tuning the mixing rate together with zein concentration, particles with sizes ranging from nanometers to micrometers and low polydispersity index values could be easily obtained. Based on the size-controlled fabrication method, SC-coated zein nanoparticles could also be obtained in a size-controlled manner by incubation of the coating material with the already-formed zein particles. The resultant nanoparticles showed better performance in both drug loading and controlled release, compared with zein/SC hybrid nanoparticles fabricated by adding aqueous ethanol solution to SC solution. The possible mechanisms of the nanoprecipitation process and self-assembly formation of these nanoparticles are discussed. PMID:29184408

Size-controlled fabrication of zein nano/microparticles by modified anti-solvent precipitation with/without sodium caseinate.

PubMed

Li, Feng; Chen, Yan; Liu, Shubo; Qi, Jian; Wang, Weiying; Wang, Chenhua; Zhong, Ruiyue; Chen, Zhijun; Li, Xiaoming; Guan, Yuanzhou; Kong, Wei; Zhang, Yong

2017-01-01

Zein-based nano/microparticles have been demonstrated to be promising carrier systems for both the food industry and biomedical applications. However, the fabrication of size-controlled zein particles has been a challenging issue. In this study, a modified anti-solvent precipitation method was developed, and the effects of various factors, such as mixing method, solvent/anti-solvent ratio, temperature, zein concentrations and the presence of sodium caseinate (SC) on properties of zein particles were investigated. Evidence is presented that, among the previously mentioned factors, the mixing method, especially mixing rate, could be used as an effective parameter to control the size of zein particles without changing other parameters. Moreover, through fine-tuning the mixing rate together with zein concentration, particles with sizes ranging from nanometers to micrometers and low polydispersity index values could be easily obtained. Based on the size-controlled fabrication method, SC-coated zein nanoparticles could also be obtained in a size-controlled manner by incubation of the coating material with the already-formed zein particles. The resultant nanoparticles showed better performance in both drug loading and controlled release, compared with zein/SC hybrid nanoparticles fabricated by adding aqueous ethanol solution to SC solution. The possible mechanisms of the nanoprecipitation process and self-assembly formation of these nanoparticles are discussed.

The efficacy of nimodipine drug delivery using mPEG-PLA micelles and mPEG-PLA/TPGS mixed micelles.

PubMed

Huang, Shuling; Yu, Xiaohong; Yang, Linlin; Song, Fenglan; Chen, Gang; Lv, Zhufen; Li, Tiao; Chen, De; Zhu, Wanhua; Yu, Anan; Zhang, Yongming; Yang, Fan

2014-10-15

In order to develop and compare mPEG-PLA micelles and mPEG-PLA/TPGS mixed micelles, with the intention to develop a highly efficient formulation for nimodipine (NIM), NIM-loaded micelles and mixed micelles were made and their pharmacokinetics were studied. Single factor experiments and orthogonal experiments were designed to optimize the final preparation process, characterizations and drug release behaviors were studied. Pharmacokinetics of NIM micelles, NIM mixed micelles were researched and were compared to NIM solution. Micelles and mixed micelles were prepared by solvent evaporation method, with relatively high drug loading efficiency and within nano-particle size range. The CMC value of mPEG-PLA was lower than that of mPEG-PLA/TPGS. The results of FTIR and TEM confirmed the spherical core-shell structure of micelles as well as mixed micelles, and the encapsulation of NIM inside the cores. In vitro release showed that micelles and mixed micelles had sustained release effect in the forms of passive diffusion and dissolution process, respectively. Following intraperitoneal administration (5mg/kg), micelles and mixed micelles were absorbed faster than solution, and with larger MRT(0-t), smaller CLz and larger AUC(0-t) as compared to that of solution, which showed micelles and mixed micelles had higher retention, slower elimination and higher bioavailability. This experiment also showed that mixed micelles released NIM more stably than micelles. By evaluate the bioequivalence, NIM micelles and NIM mixed micelles were testified non-bioequivalent to NIM solution. Micelles and mixed micelles could sustain the NIM concentrations more efficiently in plasma as compared to solution. Mixed micelles were the best ones since they had high loading content and released more stably. Thus, apprehending micelles and mixed micelles were suited as poor aqueous solubility drug carriers, and mixed micelles were better due to their high loading content and more stable release. Copyright © 2014 Elsevier B.V. All rights reserved.

Method For Processing Spent (Trn,Zr)N Fuel

DOEpatents

Miller, William E.; Richmann, Michael K.

2004-07-27

A new process for recycling spent nuclear fuels, in particular, mixed nitrides of transuranic elements and zirconium. The process consists of two electrorefiner cells in series configuration. A transuranic element such as plutonium is reduced at the cathode in the first cell, zirconium at the cathode in the second cell, and nitrogen-15 is released and captured for reuse to make transuranic and zirconium nitrides.

An Electronic Service Quality Reference Model for Designing E-Commerce Websites Which Maximizes Customer Satisfaction

ERIC Educational Resources Information Center

Shaheen, Amer N.

2011-01-01

This research investigated Electronic Service Quality (E-SQ) features that contribute to customer satisfaction in an online environment. The aim was to develop an approach which improves E-CRM processes and enhances online customer satisfaction. The research design adopted mixed methods involving qualitative and quantitative methods to…

The Role of Electronic Portfolios in the Hiring of K-12 Teachers

ERIC Educational Resources Information Center

Strawhecker, Jane; Messersmith, Ken; Balcom, Amanda

2008-01-01

This mixed-method study explored the perspectives of principals involved in the hiring process of K-12 teachers in one Midwestern state. Participants' survey data was used to examine the pros and cons of portfolios, to determine preferences in portfolio contents and electronic delivery method, and to investigate what predictors significantly…

Assessing Argumentative Representation with Bayesian Network Models in Debatable Social Issues

ERIC Educational Resources Information Center

Zhang, Zhidong; Lu, Jingyan

2014-01-01

This study seeks to obtain argumentation models, which represent argumentative processes and an assessment structure in secondary school debatable issues in the social sciences. The argumentation model was developed based on mixed methods, a combination of both theory-driven and data-driven methods. The coding system provided a combing point by…

Mixed methods research in mental health nursing.

PubMed

Kettles, A M; Creswell, J W; Zhang, W

2011-08-01

Mixed methods research is becoming more widely used in order to answer research questions and to investigate research problems in mental health and psychiatric nursing. However, two separate literature searches, one in Scotland and one in the USA, revealed that few mental health nursing studies identified mixed methods research in their titles. Many studies used the term 'embedded' but few studies identified in the literature were mixed methods embedded studies. The history, philosophical underpinnings, definition, types of mixed methods research and associated pragmatism are discussed, as well as the need for mixed methods research. Examples of mental health nursing mixed methods research are used to illustrate the different types of mixed methods: convergent parallel, embedded, explanatory and exploratory in their sequential and concurrent combinations. Implementing mixed methods research is also discussed briefly and the problem of identifying mixed methods research in mental and psychiatric nursing are discussed with some possible solutions to the problem proposed. © 2011 Blackwell Publishing.

Microcomputer system for receiving and processing of satellite TOVS/TIP data for vertical sounding of the atmosphere

NASA Astrophysics Data System (ADS)

Baranski, L. A.; Rozemski, K.

TOVS/TIP digital data transmitted at the VHF-BEACON range from NOAA satellites are receiving and processing at the SDRPC. Receiving station is connected with the microcomputer IBM-PC/AT which process TOVS/TIP data via two states: initial data processing and retrieval of vertical profiles of the temperature, water vapour and ozone mixing ratio in the atmosphere. Receiving and processing equipment, retrieval methods, results and error discussion are presented.

Approaching Etuaptmumk – introducing a consensus-based mixed method for health services research

PubMed Central

Chatwood, Susan; Paulette, Francois; Baker, Ross; Eriksen, Astrid; Hansen, Ketil Lenert; Eriksen, Heidi; Hiratsuka, Vanessa; Lavoie, Josée; Lou, Wendy; Mauro, Ian; Orbinski, James; Pabrum, Nathalie; Retallack, Hanna; Brown, Adalsteinn

2015-01-01

With the recognized need for health systems’ improvements in the circumpolar and indigenous context, there has been a call to expand the research agenda across all sectors influencing wellness and to recognize academic and indigenous knowledge through the research process. Despite being recognized as a distinct body of knowledge in international forums and across indigenous groups, examples of methods and theories based on indigenous knowledge are not well documented in academic texts or peer-reviewed literature on health systems. This paper describes the use of a consensus-based, mixed method with indigenous knowledge by an experienced group of researchers and indigenous knowledge holders who collaborated on a study that explored indigenous values underlying health systems stewardship. The method is built on the principles of Etuaptmumk or two-eyed seeing, which aim to respond to and resolve the inherent conflicts between indigenous ways of knowing and the scientific inquiry that informs the evidence base in health care. Mixed methods’ frameworks appear to provide a framing suitable for research questions that require data from indigenous knowledge sources and western knowledge. The nominal consensus method, as a western paradigm, was found to be responsive to embedding of indigenous knowledge and allowed space to express multiple perspectives and reach consensus on the question at hand. Further utilization and critical evaluation of this mixed methodology with indigenous knowledge are required. PMID:26004427

Combining the power of stories and the power of numbers: mixed methods research and mixed studies reviews.

PubMed

Pluye, Pierre; Hong, Quan Nha

2014-01-01

This article provides an overview of mixed methods research and mixed studies reviews. These two approaches are used to combine the strengths of quantitative and qualitative methods and to compensate for their respective limitations. This article is structured in three main parts. First, the epistemological background for mixed methods will be presented. Afterward, we present the main types of mixed methods research designs and techniques as well as guidance for planning, conducting, and appraising mixed methods research. In the last part, we describe the main types of mixed studies reviews and provide a tool kit and examples. Future research needs to offer guidance for assessing mixed methods research and reporting mixed studies reviews, among other challenges.

Using mixed methods research designs in health psychology: an illustrated discussion from a pragmatist perspective.

PubMed

Bishop, Felicity L

2015-02-01

To outline some of the challenges of mixed methods research and illustrate how they can be addressed in health psychology research. This study critically reflects on the author's previously published mixed methods research and discusses the philosophical and technical challenges of mixed methods, grounding the discussion in a brief review of methodological literature. Mixed methods research is characterized as having philosophical and technical challenges; the former can be addressed by drawing on pragmatism, the latter by considering formal mixed methods research designs proposed in a number of design typologies. There are important differences among the design typologies which provide diverse examples of designs that health psychologists can adapt for their own mixed methods research. There are also similarities; in particular, many typologies explicitly orient to the technical challenges of deciding on the respective timing of qualitative and quantitative methods and the relative emphasis placed on each method. Characteristics, strengths, and limitations of different sequential and concurrent designs are identified by reviewing five mixed methods projects each conducted for a different purpose. Adapting formal mixed methods designs can help health psychologists address the technical challenges of mixed methods research and identify the approach that best fits the research questions and purpose. This does not obfuscate the need to address philosophical challenges of mixing qualitative and quantitative methods. Statement of contribution What is already known on this subject? Mixed methods research poses philosophical and technical challenges. Pragmatism in a popular approach to the philosophical challenges while diverse typologies of mixed methods designs can help address the technical challenges. Examples of mixed methods research can be hard to locate when component studies from mixed methods projects are published separately. What does this study add? Critical reflections on the author's previously published mixed methods research illustrate how a range of different mixed methods designs can be adapted and applied to address health psychology research questions. The philosophical and technical challenges of mixed methods research should be considered together and in relation to the broader purpose of the research. © 2014 The British Psychological Society.

TH-E-17A-07: Improved Cine Four-Dimensional Computed Tomography (4D CT) Acquisition and Processing Method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Castillo, S; Castillo, R; Castillo, E

2014-06-15

Purpose: Artifacts arising from the 4D CT acquisition and post-processing methods add systematic uncertainty to the treatment planning process. We propose an alternate cine 4D CT acquisition and post-processing method to consistently reduce artifacts, and explore patient parameters indicative of image quality. Methods: In an IRB-approved protocol, 18 patients with primary thoracic malignancies received a standard cine 4D CT acquisition followed by an oversampling 4D CT that doubled the number of images acquired. A second cohort of 10 patients received the clinical 4D CT plus 3 oversampling scans for intra-fraction reproducibility. The clinical acquisitions were processed by the standard phasemore » sorting method. The oversampling acquisitions were processed using Dijkstras algorithm to optimize an artifact metric over available image data. Image quality was evaluated with a one-way mixed ANOVA model using a correlation-based artifact metric calculated from the final 4D CT image sets. Spearman correlations and a linear mixed model tested the association between breathing parameters, patient characteristics, and image quality. Results: The oversampling 4D CT scans reduced artifact presence significantly by 27% and 28%, for the first cohort and second cohort respectively. From cohort 2, the inter-replicate deviation for the oversampling method was within approximately 13% of the cross scan average at the 0.05 significance level. Artifact presence for both clinical and oversampling methods was significantly correlated with breathing period (ρ=0.407, p-value<0.032 clinical, ρ=0.296, p-value<0.041 oversampling). Artifact presence in the oversampling method was significantly correlated with amount of data acquired, (ρ=-0.335, p-value<0.02) indicating decreased artifact presence with increased breathing cycles per scan location. Conclusion: The 4D CT oversampling acquisition with optimized sorting reduced artifact presence significantly and reproducibly compared to the phase-sorted clinical acquisition.« less

Absolute variation of the mechanical characteristics of halloysite reinforced polyurethane nanocomposites complemented by Taguchi and ANOVA approaches

NASA Astrophysics Data System (ADS)

Gaaz, Tayser Sumer; Sulong, Abu Bakar; Kadhum, Abdul Amir H.; Nassir, Mohamed H.; Al-Amiery, Ahmed A.

The variation of the results of the mechanical properties of halloysite nanotubes (HNTs) reinforced thermoplastic polyurethane (TPU) at different HNTs loadings was implemented as a tool for analysis. The preparation of HNTs-TPU nanocomposites was performed under four controlled parameters of mixing temperature, mixing speed, mixing time, and HNTs loading at three levels each to satisfy Taguchi method orthogonal array L9 aiming to optimize these parameters for the best measurements of tensile strength, Young's modulus, and tensile strain (known as responses). The maximum variation of the experimental results for each response was determined and analysed based on the optimized results predicted by Taguchi method and ANOVA. It was found that the maximum absolute variations of the three mentioned responses are 69%, 352%, and 126%, respectively. The analysis has shown that the preparation of the optimized tensile strength requires 1 wt.% HNTs loading (excluding 2 wt.% and 3 wt.%), mixing temperature of 190 °C (excluding 200 °C and 210 °C), and mixing speed of 30 rpm (excluding 40 rpm and 50 rpm). In addition, the analysis has determined that the mixing time at 20 min has no effect on the preparation. The mentioned analysis was fortified by ANOVA, images of FESEM, and DSC results. Seemingly, the agglomeration and distribution of HNTs in the nanocomposite play an important role in the process. The outcome of the analysis could be considered as a very important step towards the reliability of Taguchi method.

Implications of the nonlinear equation of state for upwelling in the ocean interior

NASA Astrophysics Data System (ADS)

McDougall, Trevor J.; You, Yuzhu

1990-08-01

The nonlinear nature of the in situ density of seawater as a function of the potential temperature, pressure and salinity causes two vertical advection processes (thermobaricity and cabbeling) and also complicates the use of microstructure data to deduce upwelling velocities. Cabbeling and thermobaricity are evaluated and mapped on some neutral surfaces in each of the world's oceans by taking the lateral flux of scalars to be parameterized by a lateral diffusivity. In most of the ocean, these two processes are weak, but where there is a significant epineutral gradient of potential temperature, the downwelling due to cabbeling is quite large. In the Southern ocean, where there is a large slope of the neutral surfaces, thermobaricity causes a larger downwelling velocity than cabbeling, and the two processes together cause a dianeutral velocity of about -2×10-7 m s-1. The complementary roles of vertical mixing and vertical advection in achieving water-mass conversion are demonstrated, since maps of the dianeutral motion caused by vertical mixing are quite different to maps of water-mass conversion caused by the same process. This emphasizes the need to include both vertical advection and vertical mixing in ocean models. The method that is used to infer the upwelling velocity from microstructure dissipation measurements is also significantly affected by the nonlinear nature of the equation of state. The extra term that needs to be included in this method is a strong function of depth, changing sign at a depth of about 1500m.

Nonsteady Problem for an Elastic Half-Plane with Mixed Boundary Conditions

NASA Astrophysics Data System (ADS)

Kubenko, V. D.

2016-03-01

An approach to studying nonstationary wave processes in an elastic half-plane with mixed boundary conditions of the fourth boundary-value problem of elasticity is proposed. The Laplace and Fourier transforms are used. The sequential inversion of these transforms or the inversion of the joint transform by the Cagniard method allows obtaining the required solution (stresses, displacements) in a closed analytic form. With this approach, the problem can be solved for various types of loads

Slip casting nano-particle powders for making transparent ceramics

DOEpatents

Kuntz, Joshua D [Livermore, CA; Soules, Thomas F [Livermore, CA; Landingham, Richard Lee [Livermore, CA; Hollingsworth, Joel P [Oakland, CA

2011-04-12

A method of making a transparent ceramic including the steps of providing nano-ceramic powders in a processed or unprocessed form, mixing the powders with de-ionized water, the step of mixing the powders with de-ionized water producing a slurry, sonifing the slurry to completely wet the powder and suspend the powder in the de-ionized water, separating very fine particles from the slurry, molding the slurry, and curing the slurry to produce the transparent ceramic.

A case study of microphysical structures and hydrometeor phase in convection using radar Doppler spectra at Darwin, Australia

NASA Astrophysics Data System (ADS)

Riihimaki, L. D.; Comstock, J. M.; Luke, E.; Thorsen, T. J.; Fu, Q.

2017-07-01

To understand the microphysical processes that impact diabatic heating and cloud lifetimes in convection, we need to characterize the spatial distribution of supercooled liquid water. To address this observational challenge, ground-based vertically pointing active sensors at the Darwin Atmospheric Radiation Measurement site are used to classify cloud phase within a deep convective cloud. The cloud cannot be fully observed by a lidar due to signal attenuation. Therefore, we developed an objective method for identifying hydrometeor classes, including mixed-phase conditions, using k-means clustering on parameters that describe the shape of the Doppler spectra from vertically pointing Ka-band cloud radar. This approach shows that multiple, overlapping mixed-phase layers exist within the cloud, rather than a single region of supercooled liquid. Diffusional growth calculations show that the conditions for the Wegener-Bergeron-Findeisen process exist within one of these mixed-phase microstructures.

System and method for investigating sub-surface features and 3D imaging of non-linear property, compressional velocity VP, shear velocity VS and velocity ratio VP/VS of a rock formation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vu, Cung Khac; Skelt, Christopher; Nihei, Kurt

A system and a method for generating a three-dimensional image of a rock formation, compressional velocity VP, shear velocity VS and velocity ratio VP/VS of a rock formation are provided. A first acoustic signal includes a first plurality of pulses. A second acoustic signal from a second source includes a second plurality of pulses. A detected signal returning to the borehole includes a signal generated by a non-linear mixing process from the first and second acoustic signals in a non-linear mixing zone within an intersection volume. The received signal is processed to extract the signal over noise and/or signals resultingmore » from linear interaction and the three dimensional image of is generated.« less

System and method for generating micro-seismic events and characterizing properties of a medium with non-linear acoustic interactions

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vu, Cung Khac; Nihei, Kurt; Johnson, Paul A.

2015-12-29

A method and system includes generating a first coded acoustic signal including pulses each having a modulated signal at a central frequency; and a second coded acoustic signal each pulse of which includes a modulated signal a central frequency of which is a fraction d of the central frequency of the modulated signal for the corresponding pulse in the first plurality of pulses. A receiver detects a third signal generated by a non-linear mixing process in the mixing zone and the signal is processed to extract the third signal to obtain an emulated micro-seismic event signal occurring at the mixingmore » zone; and to characterize properties of the medium or creating a 3D image of the properties of the medium, or both, based on the emulated micro-seismic event signal.« less

Towards implementing coordinated healthy lifestyle promotion in primary care: a mixed method study.

PubMed

Thomas, Kristin; Bendtsen, Preben; Krevers, Barbro

2015-01-01

Primary care is increasingly being encouraged to integrate healthy lifestyle promotion in routine care. However, implementation has been suboptimal. Coordinated care could facilitate lifestyle promotion practice but more empirical knowledge is needed about the implementation process of coordinated care initiatives. This study aimed to evaluate the implementation of a coordinated healthy lifestyle promotion initiative in a primary care setting. A mixed method, convergent, parallel design was used. Three primary care centres took part in a two-year research project. Data collection methods included individual interviews, document data and questionnaires. The General Theory of Implementation was used as a framework in the analysis to integrate the data sources. Multi-disciplinary teams were implemented in the centres although the role of the teams as a resource for coordinated lifestyle promotion was not fully embedded at the centres. Embedding of the teams was challenged by differences among the staff, patients and team members on resources, commitment, social norms and roles. The study highlights the importance of identifying and engaging key stakeholders early in an implementation process. The findings showed how the development phase influenced the implementation and embedding processes, which add aspects to the General Theory of Implementation.

Solid-state reaction synthesis for mixed-phase Eu3+-doped bismuth molybdate and its luminescence properties

NASA Astrophysics Data System (ADS)

Liang, Danyang; Ding, Yu; Wang, Nan; Cai, Xiaomeng; Li, Jia; Han, Linyu; Wang, Shiqi; Han, Yuanyuan; Jia, Guang; Wang, Liyong

2017-09-01

A method for mixed-phase bismuth molybdate doped with Eu3+ ions was developed by solid-state reaction assisting with polyvinyl alcohol (PVA). The results of powder X-ray diffraction showed a mixed-phase structure and the microscopical characterization technology revealed the formation process with the addition of PVA. As a structure inducer, the PVA molecules played a vital role in the formation of phase structure. The as-obtained Eu3+-doped bismuth molybdates were also characterized by using different spectroscopic techniques including FTIR and photoluminescence (PL). The results show that doping concentration, PVA addition and calcination temperature affect photoluminescence properties remarkably.

Model of Values-Based Management Process in Schools: A Mixed Design Study

ERIC Educational Resources Information Center

Dogan, Soner

2016-01-01

The aim of this paper is to evaluate the school administrators' values-based management behaviours according to the teachers' perceptions and opinions and, accordingly, to build a model of values-based management process in schools. The study was conducted using explanatory design which is inclusive of both quantitative and qualitative methods.…

Students' Attitudes, Self-Efficacy and Experiences in a Modified Process-Oriented Guided Inquiry Learning Undergraduate Chemistry Classroom

ERIC Educational Resources Information Center

Vishnumolakala, Venkat Rao; Southam, Daniel C.; Treagust, David F.; Mocerino, Mauro; Qureshi, Sheila

2017-01-01

This one-semester, mixed methods study underpinning social cognition and theory of planned behaviour investigated the attitudes, self-efficacy, and experiences of 559 first year undergraduate chemistry students from two cohorts in modified process-oriented guided inquiry learning (POGIL) classes. Versions of attitude toward the study of chemistry…

The E-Portfolio: A Tool and a Process for Educational Leadership

ERIC Educational Resources Information Center

Hyland, N.; Kranzow, J.

2012-01-01

This mixed-method study focuses on the impact of using electronic portfolios (e-portfolios) in a graduate capstone course as a tool for increasing students' critical thinking and self-directed learning. The primary results indicate that the e-portfolio, as both a tool and a process, shows great potential. This study also reveals the capacity of…

Students' Self-Reflections on Their Personality Scores Applied to the Processes of Learning and Achievement

ERIC Educational Resources Information Center

Mcilroy, David; Todd, Valerie; Palmer-Conn, Sue; Poole, Karen

2016-01-01

Research on personality in the educational context has primarily focused on quantitative approaches, so this study used a mixed methods approach to capture the boarder aspects of students' learning processes. Goals were to ensure that student responses were reliable and normal (quantitative data), and to examine qualitative reflections on…

The application of mixed methods designs to trauma research.

PubMed

Creswell, John W; Zhang, Wanqing

2009-12-01

Despite the use of quantitative and qualitative data in trauma research and therapy, mixed methods studies in this field have not been analyzed to help researchers designing investigations. This discussion begins by reviewing four core characteristics of mixed methods research in the social and human sciences. Combining these characteristics, the authors focus on four select mixed methods designs that are applicable in trauma research. These designs are defined and their essential elements noted. Applying these designs to trauma research, a search was conducted to locate mixed methods trauma studies. From this search, one sample study was selected, and its characteristics of mixed methods procedures noted. Finally, drawing on other mixed methods designs available, several follow-up mixed methods studies were described for this sample study, enabling trauma researchers to view design options for applying mixed methods research in trauma investigations.

Isothermal separation processes

NASA Technical Reports Server (NTRS)

England, C.

1982-01-01

The isothermal processes of membrane separation, supercritical extraction and chromatography were examined using availability analysis. The general approach was to derive equations that identified where energy is consumed in these processes and how they compare with conventional separation methods. These separation methods are characterized by pure work inputs, chiefly in the form of a pressure drop which supplies the required energy. Equations were derived for the energy requirement in terms of regular solution theory. This approach is believed to accurately predict the work of separation in terms of the heat of solution and the entropy of mixing. It can form the basis of a convenient calculation method for optimizing membrane and solvent properties for particular applications. Calculations were made on the energy requirements for a membrane process separating air into its components.

Fabrication of selective-area growth InGaN LED by mixed-source hydride vapor-phase epitaxy

NASA Astrophysics Data System (ADS)

Bae, Sung Geun; Jeon, Injun; Jeon, Hunsoo; Kim, Kyoung Hwa; Yang, Min; Yi, Sam Nyung; Lee, Jae Hak; Ahn, Hyung Soo; Yu, Young Moon; Sawaki, Nobuhiko; Kim, Suck-Whan

2018-01-01

We prepared InGaN light-emitting diodes (LEDs) with the active layers grown from a mixed source of Ga-In-N materials on an n-type GaN substrate by a selective-area growth method and three fabrication steps: photolithography, epitaxial layer growth, and metallization. The preparation followed a previously developed experimental process using apparatus for mixed-source hydride vapor-phase epitaxy (HVPE), which consisted of a multi-graphite boat, for insulating against the high temperature and to control the growth rate of epilayers, filled with the mixed source on the inside and a radio-frequency (RF) heating coil for heating to a high temperature (T > 900 °C) and for easy control of temperature outside the source zone. Two types of LEDs were prepared, with In compositions of 11.0 and 6.0% in the InGaN active layer, and room-temperature electroluminescence measurements exhibited a main peak corresponding to the In composition at either 420 or 390 nm. The consecutive growth of InGaN LEDs by the mixed-source HVPE method provides a technique for the production of LEDs with a wide range of In compositions in the active layer.

Improving Mixed-phase Cloud Parameterization in Climate Model with the ACRF Measurements

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Zhien

Mixed-phase cloud microphysical and dynamical processes are still poorly understood, and their representation in GCMs is a major source of uncertainties in overall cloud feedback in GCMs. Thus improving mixed-phase cloud parameterizations in climate models is critical to reducing the climate forecast uncertainties. This study aims at providing improved knowledge of mixed-phase cloud properties from the long-term ACRF observations and improving mixed-phase clouds simulations in the NCAR Community Atmosphere Model version 5 (CAM5). The key accomplishments are: 1) An improved retrieval algorithm was developed to provide liquid droplet concentration for drizzling or mixed-phase stratiform clouds. 2) A new ice concentrationmore » retrieval algorithm for stratiform mixed-phase clouds was developed. 3) A strong seasonal aerosol impact on ice generation in Arctic mixed-phase clouds was identified, which is mainly attributed to the high dust occurrence during the spring season. 4) A suite of multi-senor algorithms was applied to long-term ARM observations at the Barrow site to provide a complete dataset (LWC and effective radius profile for liquid phase, and IWC, Dge profiles and ice concentration for ice phase) to characterize Arctic stratiform mixed-phase clouds. This multi-year stratiform mixed-phase cloud dataset provides necessary information to study related processes, evaluate model stratiform mixed-phase cloud simulations, and improve model stratiform mixed-phase cloud parameterization. 5). A new in situ data analysis method was developed to quantify liquid mass partition in convective mixed-phase clouds. For the first time, we reliably compared liquid mass partitions in stratiform and convective mixed-phase clouds. Due to the different dynamics in stratiform and convective mixed-phase clouds, the temperature dependencies of liquid mass partitions are significantly different due to much higher ice concentrations in convective mixed phase clouds. 6) Systematic evaluations of mixed-phase cloud simulations by CAM5 were performed. Measurement results indicate that ice concentrations control stratiform mixed-phase cloud properties. The improvement of ice concentration parameterization in the CAM5 was done in close collaboration with Dr. Xiaohong Liu, PNNL (now at University of Wyoming).« less

Basic Aspects of Deep Soil Mixing Technology Control

NASA Astrophysics Data System (ADS)

Egorova, Alexandra A.; Rybak, Jarosław; Stefaniuk, Damian; Zajączkowski, Przemysław

2017-10-01

Improving a soil is a process of increasing its physical/mechanical properties without changing its natural structure. Improvement of soil subbase is reached by means of the knitted materials, or other methods when strong connection between soil particles is established. The method of DSM (Deep Soil Mixing) columns has been invented in Japan in 1970s. The main reason of designing cement-soil columns is to improve properties of local soils (such as strength and stiffness) by mixing them with various cementing materials. Cement and calcium are the most commonly used binders. However new research undertaken worldwide proves that apart from these materials, also gypsum or fly ashes can also be successfully implemented. As the Deep Soil Mixing is still being under development, anticipating mechanical properties of columns in particular soils and the usage of cementing materials in formed columns is very difficult and often inappropriate to predict. That is why a research is carried out in order to find out what binders and mixing technology should be used. The paper presents several remarks on the testing procedures related to quality and capacity control of Deep Soil Mixing columns. Soil improvement methods, their advantages and limitations are briefly described. The authors analyse the suitability of selected testing methods on subsequent stages of design and execution of special foundations works. Chosen examples from engineering practice form the basis for recommendations for the control procedures. Presented case studies concerning testing the on capacity field samples and laboratory procedures on various categories of soil-cement samples were picked from R&D and consulting works offered by Wroclaw University of Science and Technology. Special emphasis is paid to climate conditions which may affect the availability of performing and controlling of DSM techniques in polar zones, with a special regard to sample curing.

The complex fluid dynamics of simple diffusion

NASA Astrophysics Data System (ADS)

Vold, Erik

2017-11-01

Diffusion as the mass transport process responsible for mixing fluids at the atomic level is often underestimated in its complexity. An initial discontinuity between two species of different atomic masses exhibits a mass density discontinuity under isothermal pressure equilibrium implying equal species molar densities. The self-consistent kinetic transport processes across such an interface leads to a zero sum of mass flux relative to the center of mass and so diffusion alone cannot relax an initially stationary mass discontinuity nor broaden the density profile at the interface. The diffusive mixing leads to a molar imbalance which drives a center of mass velocity which moves the heavier species toward the lighter species leading to the interfacial density relaxation. Simultaneously, the species non-zero molar flux modifies the pressure profile in a transient wave and in a local perturbation. The resulting center of mass velocity has two components; one, associated with the divergence of the flow, persists in the diffusive mixing region throughout the diffusive mixing process, and two, travelling waves at the front of the pressure perturbations propagate away from the mixing region. The momentum in these waves is necessary to maintain momentum conservation in the center of mass frame. Thus, in a number of ways, the diffusive mixing provides feedback into the small scale advective motions. Numerical methods which diffuse all species assuming P-T equilibrium may not recover the subtle dynamics of mass transport at an interface. Work performed by the LANS, LLC, under USDOE Contract No. DE-AC52-06NA25396, funded by the (ASC) Program.

Dealing with gene expression missing data.

PubMed

Brás, L P; Menezes, J C

2006-05-01

Compared evaluation of different methods is presented for estimating missing values in microarray data: weighted K-nearest neighbours imputation (KNNimpute), regression-based methods such as local least squares imputation (LLSimpute) and partial least squares imputation (PLSimpute) and Bayesian principal component analysis (BPCA). The influence in prediction accuracy of some factors, such as methods' parameters, type of data relationships used in the estimation process (i.e. row-wise, column-wise or both), missing rate and pattern and type of experiment [time series (TS), non-time series (NTS) or mixed (MIX) experiments] is elucidated. Improvements based on the iterative use of data (iterative LLS and PLS imputation--ILLSimpute and IPLSimpute), the need to perform initial imputations (modified PLS and Helland PLS imputation--MPLSimpute and HPLSimpute) and the type of relationships employed (KNNarray, LLSarray, HPLSarray and alternating PLS--APLSimpute) are proposed. Overall, it is shown that data set properties (type of experiment, missing rate and pattern) affect the data similarity structure, therefore influencing the methods' performance. LLSimpute and ILLSimpute are preferable in the presence of data with a stronger similarity structure (TS and MIX experiments), whereas PLS-based methods (MPLSimpute, IPLSimpute and APLSimpute) are preferable when estimating NTS missing data.

Applying mixed methods to pretest the Pressure Ulcer Quality of Life (PU-QOL) instrument.

PubMed

Gorecki, C; Lamping, D L; Nixon, J; Brown, J M; Cano, S

2012-04-01

Pretesting is key in the development of patient-reported outcome (PRO) instruments. We describe a mixed-methods approach based on interviews and Rasch measurement methods in the pretesting of the Pressure Ulcer Quality of Life (PU-QOL) instrument. We used cognitive interviews to pretest the PU-QOL in 35 patients with pressure ulcers with the view to identifying problematic items, followed by Rasch analysis to examine response options, appropriateness of the item series and biases due to question ordering (item fit). We then compared findings in an interactive and iterative process to identify potential strengths and weaknesses of PU-QOL items, and guide decision-making about further revisions to items and design/layout. Although cognitive interviews largely supported items, they highlighted problems with layout, response options and comprehension. Findings from the Rasch analysis identified problems with response options through reversed thresholds. The use of a mixed-methods approach in pretesting the PU-QOL instrument proved beneficial for identifying problems with scale layout, response options and framing/wording of items. Rasch measurement methods are a useful addition to standard qualitative pretesting for evaluating strengths and weaknesses of early stage PRO instruments.

The Solid Phase Curing Time Effect of Asbuton with Texapon Emulsifier at the Optimum Bitumen Content

NASA Astrophysics Data System (ADS)

Sarwono, D.; Surya D, R.; Setyawan, A.; Djumari

2017-07-01

Buton asphalt (asbuton) could not be utilized optimally in Indonesia. Asbuton utilization rate was still low because the processed product of asbuton still have impracticable form in the term of use and also requiring high processing costs. This research aimed to obtain asphalt products from asbuton practical for be used through the extraction process and not requiring expensive processing cost. This research was done with experimental method in laboratory. The composition of emulsify asbuton were 5/20 grain, premium, texapon, HCl, and aquades. Solid phase was the mixture asbuton 5/20 grain and premium with 3 minutes mixing time. Liquid phase consisted texapon, HCl and aquades. The aging process was done after solid phase mixing process in order to reaction and tie of solid phase mixed become more optimal for high solubility level of asphalt production. Aging variable time were 30, 60, 90, 120, and 150 minutes. Solid and liquid phase was mixed for emulsify asbuton production, then extracted for 25 minutes. Solubility level of asphalt, water level, and asphalt characteristic was tested at extraction result of emulsify asbuton with most optimum ashphal level. The result of analysis tested data asphalt solubility level at extract asbuton resulted 94.77% on 120 minutes aging variable time. Water level test resulted water content reduction on emulsify asbuton more long time on occurring of aging solid phase. Examination of asphalt characteristic at extraction result of emulsify asbuton with optimum asphalt solubility level, obtain specimen that have rigid and strong texture in order that examination result have not sufficient ductility and penetration value.

Teacher Reported Job Satisfaction and Teacher Reported Understanding of the Evaluation Process: An Exploratory Mixed-Methods Case Study of One Urban Public School District

ERIC Educational Resources Information Center

Walsh, Maura

2013-01-01

Although there is wide consensus that teacher evaluation processes should be used to identify and measure effective teaching, this has always been an elusive goal. How teachers perceive the evaluative process is a crucial determiner of how the results of the evaluations are utilized. In 2010, the Massachusetts Department of Elementary and…

Vessel with filter and method of use

DOEpatents

Morrell, Jonathan S.; Ripley, Edward B.; Cecala, David M.

2008-01-29

Chemical processing apparatuses which incorporate a process vessel, such as a crucible or retort, and which include a gas separation or filtration system. Various embodiments incorporate such features as loose filtration material, semi-rigid filtration material, and structured filtration material. The vessel may include material that is a microwave susceptor. Filtration media may be selected so that if it inadvertently mixes with the chemical process or the reaction products of such process, it would not adversely affect the results of the chemical process.

The coaching on lifestyle (CooL) intervention for obesity, a study protocol for an action-oriented mixed-methods study.

PubMed

van Rinsum, Celeste E; Gerards, Sanne M P L; Rutten, Geert M; van de Goor, Ien A M; Kremers, Stef P J

2018-01-08

Combined lifestyle interventions (CLIs) have proved to be effective in changing and maintaining behavioural lifestyle changes and reducing overweight and obesity, in clinical and real-world settings. In this CLI, lifestyle coaches are expected to promote lifestyle changes of participants regarding physical activity and diet. In the Coaching on Lifestyle (CooL) intervention, which takes a period of 8 to 10 months, lifestyle coaches counsel adults and children aged 4 years and older (and their parents) who are obese or are overweight with an increased risk of developing cardiovascular diseases or type II diabetes. In group and individual sessions, themes such as physical activity, dietary behaviours, sleep and stress are addressed. The aim of the present study is to monitor the implementation process of the CooL intervention and to examine how the lifestyle coaches contribute to a healthier lifestyle of the participants. This action-oriented study involves monitoring the implementation process of the CooL intervention and examining the lifestyle changes achieved by participants over time, in a one-group pre-post design using mixed methods. Methods include semi-structured interviews, observations, document analysis, biomedical parameters and questionnaires. The added value of the CooL study lies in its action-oriented approach and the use of mixed methods, including both qualitative and quantitative research methods. The long-term coaching used in the CooL intervention is expected to have beneficial effects on sustained lifestyle changes. NTR6208 ; date registered: 13-01-2017.

Sensitivity of the s-process nucleosynthesis in AGB stars to the overshoot model

NASA Astrophysics Data System (ADS)

Goriely, S.; Siess, L.

2018-01-01

Context. S-process elements are observed at the surface of low- and intermediate-mass stars. These observations can be explained empirically by the so-called partial mixing of protons scenario leading to the incomplete operation of the CN cycle and a significant primary production of the neutron source. This scenario has been successful in qualitatively explaining the s-process enrichment in AGB stars. Even so, it remains difficult to describe both physically and numerically the mixing mechanisms taking place at the time of the third dredged-up between the convective envelope and the underlying C-rich radiative layer Aims: We aim to present new calculations of the s-process nucleosynthesis in AGB stars testing two different numerical implementations of chemical transport. These are based on a diffusion equation which depends on the second derivative of the composition and on a numerical algorithm where the transport of species depends linearly on the chemical gradient. Methods: The s-process nucleosynthesis resulting from these different mixing schemes is calculated with our stellar evolution code STAREVOL which has been upgraded to include an extended s-process network of 411 nuclei. Our investigation focuses on a fiducial 2 M⊙, [Fe/H] = -0.5 model star, but also includes four additional stars of different masses and metallicities. Results: We show that for the same set of parameters, the linear mixing approach produces a much larger 13C-pocket and consequently a substantially higher surface s-process enrichment compared to the diffusive prescription. Within the diffusive model, a quite extreme choice of parameters is required to account for surface s-process enrichment of 1-2 dex. These extreme conditions can not, however, be excluded at this stage. Conclusions: Both the diffusive and linear prescriptions of the overshoot mixing are suited to describe the s-process nucleosynthesis in AGB stars provided the profile of the diffusion coefficient below the convective envelope is carefully chosen. Both schemes give rise to relatively similar distributions of s-process elements, but depending on the parameters adopted, some differences may be obtained. These differences are in the element distribution, and most of all in the level of surface enrichment.

Dietary Patterns Are Associated with Metabolic Outcomes among Adult Samoans in a Cross-Sectional Study.

PubMed

Wang, Dongqing; Hawley, Nicola L; Thompson, Avery A; Lameko, Viali; Reupena, Muagatutia Sefuiva; McGarvey, Stephen T; Baylin, Ana

2017-04-01

Background: The Samoan population has been undergoing a nutrition transition toward more imported and processed foods and a more sedentary lifestyle. Objectives: We aimed to identify dietary patterns in Samoa and to evaluate their associations with metabolic outcomes. Methods: The sample of this cross-sectional study includes 2774 Samoan adults recruited in 2010 (1104 with metabolic syndrome compared with 1670 without). Principal component analysis on food items from a 104-item food-frequency questionnaire was used to identify dietary patterns. Adjusted least squares means of each component of metabolic syndrome were estimated by quintiles of factor scores for each dietary pattern. Metabolic syndrome status was regressed on quintiles of scores by using log-binomial models to obtain prevalence ratios. Results: We identified a modern pattern, a mixed-traditional pattern, and a mixed-modern pattern. The modern pattern included a high intake of imported and processed foods, including pizza, cheeseburgers, margarine, sugary drinks, desserts, snacks, egg products, noodles, nuts, breads, and cakes and a low intake of traditional agricultural products and fish. The mixed-traditional pattern had a high intake of neotraditional foods, including fruits, vegetables, soup, poultry, and fish, and imported and processed foods, including dairy products, breads, and cakes. The mixed-modern pattern was loaded with imported and processed foods, including pizza, cheeseburgers, red meat, egg products, noodles, and grains, but also with neotraditional foods, such as seafood and coconut. It also included a low intake of fish, tea, coffee, soup, and traditional agricultural staples. Higher adherence to the mixed-modern pattern was associated with lower abdominal circumference ( P -trend < 0.0001), lower serum triglycerides ( P -trend = 0.03), and higher serum HDL cholesterol ( P -trend = 0.0003). The mixed-modern pattern was inversely associated with prevalence of metabolic syndrome (the highest quintile: prevalence ratio = 0.79; 95% CI: 0.69, 0.91; P -trend = 0.006). Conclusion: Mixed dietary patterns containing healthier foods, rather than a largely imported and processed modern diet, may help prevent metabolic syndrome in Samoa. © 2017 American Society for Nutrition.

Fossil fuel combined cycle power generation method

DOEpatents

Labinov, Solomon D [Knoxville, TN; Armstrong, Timothy R [Clinton, TN; Judkins, Roddie R [Knoxville, TN

2008-10-21

A method for converting fuel energy to electricity includes the steps of converting a higher molecular weight gas into at least one mixed gas stream of lower average molecular weight including at least a first lower molecular weight gas and a second gas, the first and second gases being different gases, wherein the first lower molecular weight gas comprises H.sub.2 and the second gas comprises CO. The mixed gas is supplied to at least one turbine to produce electricity. The mixed gas stream is divided after the turbine into a first gas stream mainly comprising H.sub.2 and a second gas stream mainly comprising CO. The first and second gas streams are then electrochemically oxidized in separate fuel cells to produce electricity. A nuclear reactor can be used to supply at least a portion of the heat the required for the chemical conversion process.

Favre-Averaged Turbulence Statistics in Variable Density Mixing of Buoyant Jets

NASA Astrophysics Data System (ADS)

Charonko, John; Prestridge, Kathy

2014-11-01

Variable density mixing of a heavy fluid jet with lower density ambient fluid in a subsonic wind tunnel was experimentally studied using Particle Image Velocimetry and Planar Laser Induced Fluorescence to simultaneously measure velocity and density. Flows involving the mixing of fluids with large density ratios are important in a range of physical problems including atmospheric and oceanic flows, industrial processes, and inertial confinement fusion. Here we focus on buoyant jets with coflow. Results from two different Atwood numbers, 0.1 (Boussinesq limit) and 0.6 (non-Boussinesq case), reveal that buoyancy is important for most of the turbulent quantities measured. Statistical characteristics of the mixing important for modeling these flows such as the PDFs of density and density gradients, turbulent kinetic energy, Favre averaged Reynolds stress, turbulent mass flux velocity, density-specific volume correlation, and density power spectra were also examined and compared with previous direct numerical simulations. Additionally, a method for directly estimating Reynolds-averaged velocity statistics on a per-pixel basis is extended to Favre-averages, yielding improved accuracy and spatial resolution as compared to traditional post-processing of velocity and density fields.

Airborne observation of mixing across the entrainment zone during PARADE 2011

NASA Astrophysics Data System (ADS)

Berkes, Florian; Hoor, Peter; Bozem, Heiko; Kunkel, Daniel; Sprenger, Michael; Henne, Stephan

2016-05-01

This study presents the analysis of the structure and air mass characteristics of the lower atmosphere during the field campaign PARADE (PArticles and RAdicals: Diel observations of the impact of urban and biogenic Emissions) on Mount Kleiner Feldberg in southwestern Germany during late summer 2011. We analysed measurements of meteorological variables (temperature, moisture, pressure, wind speed and direction) from radio soundings and of chemical tracers (carbon dioxide, ozone) from aircraft measurements. We focus on the thermodynamic and dynamic properties that control the chemical distribution of atmospheric constituents in the boundary layer. We show that the evolution of tracer profiles of CO2 and O3 indicate mixing across the inversion layer (or entrainment zone). This finding is supported by the analysis of tracer-tracer correlations which are indicative for mixing and the relation of tracer profiles in relation to the evolution of the boundary layer height deduced from radio soundings. The study shows the relevance of entrainment processes for the lower troposphere in general and specifically that the tracer-tracer correlation method can be used to identify mixing and irreversible exchange processes across the inversion layer.

The Long Term Effectiveness of Intensive Stuttering Therapy: A Mixed Methods Study

ERIC Educational Resources Information Center

Irani, Farzan; Gabel, Rodney; Daniels, Derek; Hughes, Stephanie

2012-01-01

Purpose: The purpose of this study was to gain a deeper understanding of client perceptions of an intensive stuttering therapy program that utilizes a multi-faceted approach to therapy. The study also proposed to gain a deeper understanding about the process involved in long-term maintenance of meaningful changes made in therapy. Methods: The…

Random Qualitative Validation: A Mixed-Methods Approach to Survey Validation

ERIC Educational Resources Information Center

Van Duzer, Eric

2012-01-01

The purpose of this paper is to introduce the process and value of Random Qualitative Validation (RQV) in the development and interpretation of survey data. RQV is a method of gathering clarifying qualitative data that improves the validity of the quantitative analysis. This paper is concerned with validity in relation to the participants'…

75 FR 56059 - Patent Examiner Technical Training Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-09-15

...); statistical methods in validation of microarry data; personalized medicine, manufacture of carbon nanospheres... processing, growing monocrystals, hydrogen production, liquid and gas purification and separation, making... Systems and Components: Mixed signal design and architecture, flexible displays, OLED display technology...

Cold in-place recycle phase III, mix design.

DOT National Transportation Integrated Search

2014-10-01

This projects purpose is to revise the UDOT accepted design methods for Cold In-Place Recycling so that they : better reflect field behavior and target the desirable attributes of the material. The previous design process failed to : adequately pr...

Mixed methods in gerontological research: Do the qualitative and quantitative data “touch”?

PubMed Central

Happ, Mary Beth

2010-01-01

This paper distinguishes between parallel and integrated mixed methods research approaches. Barriers to integrated mixed methods approaches in gerontological research are discussed and critiqued. The author presents examples of mixed methods gerontological research to illustrate approaches to data integration at the levels of data analysis, interpretation, and research reporting. As a summary of the methodological literature, four basic levels of mixed methods data combination are proposed. Opportunities for mixing qualitative and quantitative data are explored using contemporary examples from published studies. Data transformation and visual display, judiciously applied, are proposed as pathways to fuller mixed methods data integration and analysis. Finally, practical strategies for mixing qualitative and quantitative data types are explicated as gerontological research moves beyond parallel mixed methods approaches to achieve data integration. PMID:20077973

Measurement of Coherence Decay in GaMnAs Using Femtosecond Four-wave Mixing

PubMed Central

Webber, Daniel; de Boer, Tristan; Yildirim, Murat; March, Sam; Mathew, Reuble; Gamouras, Angela; Liu, Xinyu; Dobrowolska, Margaret; Furdyna, Jacek; Hall, Kimberley

2013-01-01

The application of femtosecond four-wave mixing to the study of fundamental properties of diluted magnetic semiconductors ((s,p)-d hybridization, spin-flip scattering) is described, using experiments on GaMnAs as a prototype III-Mn-V system.  Spectrally-resolved and time-resolved experimental configurations are described, including the use of zero-background autocorrelation techniques for pulse optimization.  The etching process used to prepare GaMnAs samples for four-wave mixing experiments is also highlighted.  The high temporal resolution of this technique, afforded by the use of short (20 fsec) optical pulses, permits the rapid spin-flip scattering process in this system to be studied directly in the time domain, providing new insight into the strong exchange coupling responsible for carrier-mediated ferromagnetism.  We also show that spectral resolution of the four-wave mixing signal allows one to extract clear signatures of (s,p)-d hybridization in this system, unlike linear spectroscopy techniques.   This increased sensitivity is due to the nonlinearity of the technique, which suppresses defect-related contributions to the optical response. This method may be used to measure the time scale for coherence decay (tied to the fastest scattering processes) in a wide variety of semiconductor systems of interest for next generation electronics and optoelectronics. PMID:24326982

Aqueous processing of composite lithium ion electrode material

DOEpatents

Li, Jianlin; Armstrong, Beth L.; Daniel, Claus; Wood, III, David L.

2017-06-20

A method of making a battery electrode includes the steps of dispersing an active electrode material and a conductive additive in water with at least one dispersant to create a mixed dispersion; treating a surface of a current collector to raise the surface energy of the surface to at least the surface tension of the mixed dispersion; depositing the dispersed active electrode material and conductive additive on a current collector; and heating the coated surface to remove water from the coating.

Aqueous processing of composite lithium ion electrode material

DOEpatents

Li, Jianlin; Armstrong, Beth L; Daniel, Claus; Wood, III, David L

2015-02-17

A method of making a battery electrode includes the steps of dispersing an active electrode material and a conductive additive in water with at least one dispersant to create a mixed dispersion; treating a surface of a current collector to raise the surface energy of the surface to at least the surface tension of the mixed dispersion; depositing the dispersed active electrode material and conductive additive on a current collector; and heating the coated surface to remove water from the coating.

Relativistic electron plasma oscillations in an inhomogeneous ion background

NASA Astrophysics Data System (ADS)

Karmakar, Mithun; Maity, Chandan; Chakrabarti, Nikhil

2018-06-01

The combined effect of relativistic electron mass variation and background ion inhomogeneity on the phase mixing process of large amplitude electron oscillations in cold plasmas have been analyzed by using Lagrangian coordinates. An inhomogeneity in the ion density is assumed to be time-independent but spatially periodic, and a periodic perturbation in the electron density is considered as well. An approximate space-time dependent solution is obtained in the weakly-relativistic limit by employing the Bogolyubov and Krylov method of averaging. It is shown that the phase mixing process of relativistically corrected electron oscillations is strongly influenced by the presence of a pre-existing ion density ripple in the plasma background.

An adjoint-based framework for maximizing mixing in binary fluids

NASA Astrophysics Data System (ADS)

Eggl, Maximilian; Schmid, Peter

2017-11-01

Mixing in the inertial, but laminar parameter regime is a common application in a wide range of industries. Enhancing the efficiency of mixing processes thus has a fundamental effect on product quality, material homogeneity and, last but not least, production costs. In this project, we address mixing efficiency in the above mentioned regime (Reynolds number Re = 1000 , Peclet number Pe = 1000) by developing and demonstrating an algorithm based on nonlinear adjoint looping that minimizes the variance of a passive scalar field which models our binary Newtonian fluids. The numerical method is based on the FLUSI code (Engels et al. 2016), a Fourier pseudo-spectral code, which we modified and augmented by scalar transport and adjoint equations. Mixing is accomplished by moving stirrers which are numerically modeled using a penalization approach. In our two-dimensional simulations we consider rotating circular and elliptic stirrers and extract optimal mixing strategies from the iterative scheme. The case of optimizing shape and rotational speed of the stirrers will be demonstrated.

Enrichment of rare earth elements as environmental tracers of contamination by acid mine drainage in salt marshes: a new perspective.

PubMed

Delgado, Joaquín; Pérez-López, Rafael; Galván, Laura; Nieto, José Miguel; Boski, Tomasz

2012-09-01

Rare earth elements (REE) were analyzed in surface sediments from the Guadiana Estuary (SW Iberian Pyrite Belt). NASC (North American Shale Composite) normalized REE patterns show clearly convex curvatures in middle-REE (MREE) with respect to light- and heavy-REE, indicating acid-mixing processes between fluvial waters affected by acid mine drainage (AMD) and seawater. However, REE distributions in the mouth (closer to the coastal area) show slightly LREE-enriched and flat patterns, indicating saline-mixing processes typical of the coastal zone. NASC-normalized ratios (La/Gd and La/Yb) do not discriminate between both mixing processes in the estuary. Instead, a new parameter (E(MREE)) has been applied to measure the curvature in the MREE segment. The values of E(MREE)>0 are indicative of acid signatures and their spatial distribution reveal the existence of two decantation zones from flocculation processes related to drought periods and flood events. Studying REE fractionation through the E(MREE) may serve as a good proxy for AMD-pollution in estuarine environments in relation to the traditional methods. Copyright © 2012 Elsevier Ltd. All rights reserved.

Systematic process synthesis and design methods for cost effective waste minimization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biegler, L.T.; Grossman, I.E.; Westerberg, A.W.

We present progress on our work to develop synthesis methods to aid in the design of cost effective approaches to waste minimization. Work continues to combine the approaches of Douglas and coworkers and of Grossmann and coworkers on a hierarchical approach where bounding information allows it to fit within a mixed integer programming approach. We continue work on the synthesis of reactors and of flexible separation processes. In the first instance, we strive for methods we can use to reduce the production of potential pollutants, while in the second we look for ways to recover and recycle solvents.

Collaboration Patterns as a Function of Article Genre among Mixed Researchers: A Mixed Methods Bibliometric Study

ERIC Educational Resources Information Center

Jordan, John; Wachsmann, Melanie; Hoisington, Susan; Gonzalez, Vanessa; Valle, Rachel; Lambert, Jarod; Aleisa, Majed; Wilcox, Rachael; Benge, Cindy L.; Onwuegbuzie, Anthony J.

2017-01-01

Surprisingly, scant information exists regarding the collaboration patterns of mixed methods researchers. Thus, the purpose of this mixed methods bibliometric study was to examine (a) the distribution of the number of co-authors in articles published in the flagship mixed methods research journal (i.e., "Journal of Mixed Methods…

The Value of Mixed Methods Research: A Mixed Methods Study

ERIC Educational Resources Information Center

McKim, Courtney A.

2017-01-01

The purpose of this explanatory mixed methods study was to examine the perceived value of mixed methods research for graduate students. The quantitative phase was an experiment examining the effect of a passage's methodology on students' perceived value. Results indicated students scored the mixed methods passage as more valuable than those who…

Prevalence of Mixed-Methods Sampling Designs in Social Science Research

ERIC Educational Resources Information Center

Collins, Kathleen M. T.

2006-01-01

The purpose of this mixed-methods study was to document the prevalence of sampling designs utilised in mixed-methods research and to examine the interpretive consistency between interpretations made in mixed-methods studies and the sampling design used. Classification of studies was based on a two-dimensional mixed-methods sampling model. This…

A Mixed Methods Sampling Methodology for a Multisite Case Study

ERIC Educational Resources Information Center

Sharp, Julia L.; Mobley, Catherine; Hammond, Cathy; Withington, Cairen; Drew, Sam; Stringfield, Sam; Stipanovic, Natalie

2012-01-01

The flexibility of mixed methods research strategies makes such approaches especially suitable for multisite case studies. Yet the utilization of mixed methods to select sites for these studies is rarely reported. The authors describe their pragmatic mixed methods approach to select a sample for their multisite mixed methods case study of a…

Mixed Methods Research: The "Thing-ness" Problem.

PubMed

Hesse-Biber, Sharlene

2015-06-01

Contemporary mixed methods research (MMR) veers away from a "loosely bounded" to a "bounded" concept that has important negative implications for how qualitatively driven mixed methods approaches are positioned in the field of mixed methods and overall innovation in the praxis of MMR. I deploy the concept of reification defined as taking an object/abstraction and treating it as if it were real such that it takes on the quality of "thing-ness," having a concrete independent existence. I argue that the contemporary reification of mixed methods as a "thing" is fueled by three interrelated factors: (a) the growing formalization of mixed methods as design, (b) the unexamined belief in the "synergy" of mixed methods and, (c) the deployment of a "practical pragmatism" as the "philosophical partner" for mixed methods inquiry. © The Author(s) 2015.

Quantifying the evolution of flow boiling bubbles by statistical testing and image analysis: toward a general model.

PubMed

Xiao, Qingtai; Xu, Jianxin; Wang, Hua

2016-08-16

A new index, the estimate of the error variance, which can be used to quantify the evolution of the flow patterns when multiphase components or tracers are difficultly distinguishable, was proposed. The homogeneity degree of the luminance space distribution behind the viewing windows in the direct contact boiling heat transfer process was explored. With image analysis and a linear statistical model, the F-test of the statistical analysis was used to test whether the light was uniform, and a non-linear method was used to determine the direction and position of a fixed source light. The experimental results showed that the inflection point of the new index was approximately equal to the mixing time. The new index has been popularized and applied to a multiphase macro mixing process by top blowing in a stirred tank. Moreover, a general quantifying model was introduced for demonstrating the relationship between the flow patterns of the bubble swarms and heat transfer. The results can be applied to investigate other mixing processes that are very difficult to recognize the target.

Quantifying the evolution of flow boiling bubbles by statistical testing and image analysis: toward a general model

PubMed Central

Xiao, Qingtai; Xu, Jianxin; Wang, Hua

2016-01-01

A new index, the estimate of the error variance, which can be used to quantify the evolution of the flow patterns when multiphase components or tracers are difficultly distinguishable, was proposed. The homogeneity degree of the luminance space distribution behind the viewing windows in the direct contact boiling heat transfer process was explored. With image analysis and a linear statistical model, the F-test of the statistical analysis was used to test whether the light was uniform, and a non-linear method was used to determine the direction and position of a fixed source light. The experimental results showed that the inflection point of the new index was approximately equal to the mixing time. The new index has been popularized and applied to a multiphase macro mixing process by top blowing in a stirred tank. Moreover, a general quantifying model was introduced for demonstrating the relationship between the flow patterns of the bubble swarms and heat transfer. The results can be applied to investigate other mixing processes that are very difficult to recognize the target. PMID:27527065

Influence of Landscape Morphology and Vegetation Cover on the Sampling of Mixed Igneous Bodies

NASA Astrophysics Data System (ADS)

Perugini, Diego; Petrelli, Maurizio; Poli, Giampiero

2010-05-01

A plethora of evidence indicates that magma mixing processes can take place at any evolutionary stage of magmatic systems and that they are extremely common in both plutonic and volcanic environments (e.g. Bateman, 1995). Furthermore, recent studies have shown that the magma mixing process is governed by chaotic dynamics whose evolution in space and time generates complex compositional patterns that can span several length scales producing fractal domains (e.g. Perugini et al., 2003). The fact that magma mixing processes can produce igneous bodies exhibiting a large compositional complexity brings up the key question about the potential pitfalls that may be associated with the sampling of these systems for petrological studies. In particular, since commonly only exiguous portions of the whole magmatic system are available as outcrops for sampling, it is important to address the point whether the sampling may be considered representative of the complexity of the magmatic system. We attempt to address this crucial point by performing numerical simulations of chaotic magma mixing processes in 3D. The numerical system used in the simulations is the so-called ABC (Arnold-Beltrami-Childress) flow (e.g. Galluccio and Vulpiani, 1994), which is able to generate the contemporaneous occurrence of chaotic and regular streamlines in which the mixing efficiency is differently modulated. This numerical system has already been successfully utilized as a kinematic template to reproduce magma mixing structures observed on natural outcrops (Perugini et al., 2007). The best conditions for sampling are evaluated considering different landscape morphologies and percentages of vegetation cover. In particular, synthetic landscapes with different degree of roughness are numerically reproduced using the Random Mid-point Displacement Method (RMDM; e.g. Fournier et al., 1982) in two dimensions and superimposed to the compositional fields generated by the magma mixing simulation. Vegetation cover is generated using a random Brownian motion process in 2D. Such an approach allows us to produce vegetation patches that closely match the general topology of natural vegetation (e.g., Mandelbrot, 1982). Results show that the goodness of sampling is strongly dependant on the roughness of the landscape, with highly irregular morphologies being the best candidates to give the most complete information on the whole magma body. Conversely, sampling on flat or nearly flat surfaces should be avoided because they may contain misleading information about the magmatic system. Contrary to common sense, vegetation cover does not appear to significantly influence the representativeness of sampling if sample collection occurs on topographically irregular outcrops. Application of the proposed method for sampling area selection is straightforward. The irregularity of natural landscapes and the percentage of vegetation can be estimated by using natural landscapes extracted from digital elevation models (DEM) of the Earth's surface and satellite images by employing a variety of methods (e.g., Develi and Babadagli, 1998), thus giving one the opportunity to select a priori the best outcrops for sampling. References Bateman R (1995) The interplay between crystallization, replenishment and hybridization in large felsic magma chambers. Earth Sci Rev 39: 91-106 Develi K, Babadagli T (1998) Quantfication of natural fracture surfaces using fractal geometry. Math Geol 30: 971-998 Fournier A, Fussel D, Carpenter L (1982) Computer rendering of stochastic models. Comm ACM 25: 371-384 Galluccio S, Vulpiani A (1994) Stretching of material lines and surfaces in systems with Lagrangian chaos. Physica A 212: 75-98 Mandelbrot BB (1982) The fractal geometry of nature. W. H. Freeman, San Francisco Perugini D, Petrelli M, Poli G (2007) A Virtual Voyage through 3D Structures Generated by Chaotic Mixing of Magmas and Numerical Simulations: a New Approach for Understanding Spatial and Temporal Complexity of Magma Dynamics, Visual Geosciences, 10.1007/s10069-006-0004-x Perugini D, Poli G, Mazzuoli R (2003) Chaotic advection, fractals and diffusion during mixing of magmas: evidences from lava flows. J Volcanol Geotherm Res 124: 255-279

Separation of Flame and Nonflame-retardant Plastics Utilizing Magneto-Archimedes Method

NASA Astrophysics Data System (ADS)

Misawa, Kohei; Kobayashi, Takayuki; Mori, Tatsuya; Mishima, Fumihito; Akiyama, Yoko; Nishijima, Shigehiro

2017-07-01

In physical recycling process, the quality of recycled plastics becomes usually poor in case various kinds of plastic materials are mixed. In order to solve the problem, we tried to separate flame and nonflame-retardant plastics used for toner cartridges as one example of mixed plastics by using magneto-Archimedes method. By using this method, we can control levitation and settlement of the particles in the medium by controlling the density and magnetic susceptibility of the medium and the magnetic field. In this study, we introduced the separation system of plastics by the combination of wet type specific gravity separation and magneto-Archimedes separation. In addition, we examined continuous and massive separation by introducing the system which can separate the plastics continuously in the flowing fluid.

Direct synthesis of catalyzed hydride compounds

DOEpatents

Gross, Karl J.; Majzoub, Eric

2004-09-21

A method is disclosed for directly preparing alkali metal aluminum hydrides such as NaAlH.sub.4 and Na.sub.3 AlH.sub.6 from either the alkali metal or its hydride, and aluminum. The hydride thus prepared is doped with a small portion of a transition metal catalyst compound, such as TiCl.sub.3, TiF.sub.3, or a mixture of these materials, in order to render them reversibly hydridable. The process provides for mechanically mixing the dry reagents under an inert atmosphere followed by charging the mixed materials with high pressure hydrogen while heating the mixture to about 125.degree. C. The method is relatively simple and inexpensive and provides reversible hydride compounds which are free of the usual contamination introduced by prior art wet chemical methods.

Direct synthesis of calcium borohydride

DOEpatents

Ronnebro, Ewa Carin Ellinor [Dublin, CA; Majzoub, Eric H [Pleasanton, CA

2009-10-27

A method is disclosed for directly preparing an alkaline earth metal borohydride, i.e. Ca(BH.sub.4).sub.2, from the alkaline earth metal hydride and the alkaline earth metal boride. The borohydride thus prepared is doped with a small portion of a metal chloride catalyst compound, such as RuCl.sub.3, TiCl.sub.3, or a mixture of TiCl.sub.3 and palladium metal. The process provides for mechanically mixing the dry reagents under an inert atmosphere followed by charging the mixed materials with high pressure hydrogen at about 70 MPa while heating the mixture to about 400.degree. C. The method is relatively simple and inexpensive and provides reversible hydride compounds which are free of the usual contamination introduced by prior art wet chemical methods.

Light emission mechanism of mixed host organic light-emitting diodes

NASA Astrophysics Data System (ADS)

Song, Wook; Lee, Jun Yeob

2015-03-01

Light emission mechanism of organic light-emitting diodes with a mixed host emitting layer was studied using an exciplex type mixed host and an exciplex free mixed host. Monitoring of the current density and luminance of the two type mixed host devices revealed that the light emission process of the exciplex type mixed host was dominated by energy transfer, while the light emission of the exciplex free mixed host was controlled by charge trapping. Mixed host composition was also critical to the light emission mechanism, and the contribution of the energy transfer process was maximized at 50:50 mixed host composition. Therefore, it was possible to manage the light emission process of the mixed host devices by managing the mixed host composition.

How Students Choose a College: Understanding the Role of Internet Based Resources in the College Choice Process

ERIC Educational Resources Information Center

Burdett, Kimberli R.

2013-01-01

The purpose of this study was to gain a better understanding of how current internet-based resources are affecting the college choice process. An explanatory mixed methods design was used, and the study involved collecting qualitative data after a quantitative phase to explain the quantitative data in greater depth. An additional study was…

Analysis of Due Process Decisions in Idaho: 2004 to 2012

ERIC Educational Resources Information Center

Wattam, Marni Jo

2014-01-01

This study used an explanatory mixed methods design to examine special education due process outcomes in Idaho for the time period of January 1, 2004 to June 30, 2012. The study was done in two phases. Phase one of the study explored what types of special education related issues are being brought before the state hearing officer(s) as due process…

A MIXED CHEMICAL REDUCTANT FOR TREATING HEXAVALENT CHROMIUM IN A CHROMITE ORE PROCESSING SOLID WASTE

EPA Science Inventory

We evaluated a method for delivering ferrous iron into the subsurface to enhance chemical reduction of Cr(VI) in a chromite ore processing solid waste (COPSW). The COPSW is characterized by high pH (8.5 -11.5), high Cr(VI) concentrations in the solid phase (up to 550 mg kg-1) and...

Mixing behavior of the rhombic micromixers over a wide Reynolds number range using Taguchi method and 3D numerical simulations.

PubMed

Chung, C K; Shih, T R; Chen, T C; Wu, B H

2008-10-01

A planar micromixer with rhombic microchannels and a converging-diverging element has been systematically investigated by the Taguchi method, CFD-ACE simulations and experiments. To reduce the footprint and extend the operation range of Reynolds number, Taguchi method was used to numerically study the performance of the micromixer in a L(9) orthogonal array. Mixing efficiency is prominently influenced by geometrical parameters and Reynolds number (Re). The four factors in a L(9) orthogonal array are number of rhombi, turning angle, width of the rhombic channel and width of the throat. The degree of sensitivity by Taguchi method can be ranked as: Number of rhombi > Width of the rhombic channel > Width of the throat > Turning angle of the rhombic channel. Increasing the number of rhombi, reducing the width of the rhombic channel and throat and lowering the turning angle resulted in better fluid mixing efficiency. The optimal design of the micromixer in simulations indicates over 90% mixing efficiency at both Re > or = 80 and Re < or = 0.1. Experimental results in the optimal simulations are consistent with the simulated one. This planar rhombic micromixer has simplified the complex fabrication process of the multi-layer or three-dimensional micromixers and improved the performance of a previous rhombic micromixer at a reduced footprint and lower Re.

Optimising the emergency to ward handover process: A mixed methods study.

PubMed

Bakon, Shannon; Millichamp, Tracey

2017-11-01

The effective handover of patient health data from the emergency department to other hospital units is integral for the continuity of patient care. Yet no handover process has been identified as superior to others within this context. This study within a regional Australian hospital employed mixed methods approach including focus groups and key stakeholder consultation to develop a handover form appropriate for patient transfer from the emergency department to a variety of clinical areas. Paper-based surveys and audits were then employed to evaluate the implementation and understand staff perceptions of the form. The implementation of a patient handover form within the emergency setting was well received. Participants indicated that the form is clear, well designed and easy to navigate. It provided prompts to standardise their clinical handover and increased their accountability and responsibility within this process. To deliver an optimal nursing handover from the emergency department to various wards handovers should be structured and provide standardised content. The positive reception and use of this form provides evidence that a structured handover process can ensure standardisation of emergency department to ward nursing handovers. Copyright © 2017 College of Emergency Nursing Australasia. Published by Elsevier Ltd. All rights reserved.

αAMG based on Weighted Matching for Systems of Elliptic PDEs Arising From Displacement and Mixed Methods

DOE Office of Scientific and Technical Information (OSTI.GOV)

D'Ambra, P.; Vassilevski, P. S.

2014-05-30

Adaptive Algebraic Multigrid (or Multilevel) Methods (αAMG) are introduced to improve robustness and efficiency of classical algebraic multigrid methods in dealing with problems where no a-priori knowledge or assumptions on the near-null kernel of the underlined matrix are available. Recently we proposed an adaptive (bootstrap) AMG method, αAMG, aimed to obtain a composite solver with a desired convergence rate. Each new multigrid component relies on a current (general) smooth vector and exploits pairwise aggregation based on weighted matching in a matrix graph to define a new automatic, general-purpose coarsening process, which we refer to as “the compatible weighted matching”. Inmore » this work, we present results that broaden the applicability of our method to different finite element discretizations of elliptic PDEs. In particular, we consider systems arising from displacement methods in linear elasticity problems and saddle-point systems that appear in the application of the mixed method to Darcy problems.« less

Integrated aeroelastic vibrator for fluid mixing in open microwells

NASA Astrophysics Data System (ADS)

Xia, H. M.; Jin, X.; Zhang, Y. Y.; Wu, J. W.; Zhang, J.; Wang, Z. P.

2018-01-01

Fluid mixing in micro-wells/chambers is required in a variety of biological and biochemical processes. However, mixing fluids of small volumes is usually difficult due to increased viscous effects. In this study, we propose a new method for mixing enhancement in microliter-scale open wells. A thin elastic diaphragm is used to seal the bottom of the mixing microwell, underneath which an air chamber connects an aeroelastic vibrator. Driven by an air flow, the vibrator produces self-excited vibrations and causes pressure oscillations in the air chamber. Then the elastic diaphragm is actuated to mix the fluids in the microwell. Two designs that respectively have one single well and 2  ×  2 wells were prototyped. Testing results show that for liquids with a volume ranging from 10-60 µl and viscosity ranging from 1-5 cP, complete mixing can be obtained within 5-20 s. Furthermore, the device is operable with an air micropump, and hence facilitating the miniaturization and integration of lab-on-a-chip and microbioreactor systems.

Method of making amorphous metal composites

DOEpatents

Byrne, Martin A.; Lupinski, John H.

1982-01-01

The process comprises placing an amorphous metal in particulate form and a low molecular weight (e.g., 1000-5000) thermosetting polymer binder powder into a container, mixing these materials, and applying heat and pressure to convert the mixture into an amorphous metal composite.

Use of normal propyl bromide solvents for extraction and recovery of asphalt cements

DOT National Transportation Integrated Search

2000-11-01

Four normal propyl bromide (nPB) solvents were evaluated for use as chlorinated solvent replacements in typical hot mix asphalt (HMA) extraction and recovery processes. The experimental design included one method of extraction (centrifuge), one metho...

An evaluation of UO2-CNT composites made by SPS as an accident tolerant nuclear fuel pellet and the feasibility of SPS as an economical fabrication process for the nuclear fuel cycle

NASA Astrophysics Data System (ADS)

Cartas, Andrew R.

The innovative and advanced purpose of this study is to understand and establish proper sintering procedures for Spark Plasma Sintering process in order to fabricate high density, high thermal conductivity UO2 -CNT pellets. Mixing quality and chemical reactions have been investigated by field emission scanning electron microscopy (FESEM), wavelength dispersive spectroscopy (WDS), and X-ray diffraction (XRD). The effect of various types of CNTs on the mixing and sintering quality of UO2-CNT pellets with SPS processing have been examined. The Archimedes Immersion Method, laser flash method, and FE-SEM will be used to investigate the density, thermal conductivity, grain size, pinning effects, and CNT dispersion of fabricated UO2-CNT pellets. Pre-fabricated CNT's were added to UO 2 powder and dispersed via sonication and/or ball milling and then made into composite nuclear pellets. An investigation of the economic impact of SPS on the nuclear fuel cycle for producing pure and composite UO2 fuels was conducted.

Method for simultaneous use of a single additive for coal flotation, dewatering, and reconstitution

DOEpatents

Wen, Wu-Wey; Gray, McMahan L.; Champagne, Kenneth J.

1995-01-01

A single dose of additive contributes to three consecutive fine coal unit operations, i.e., flotation, dewatering and reconstitution, whereby the fine coal is first combined with water in a predetermined proportion so as to formulate a slurry. The slurry is then mixed with a heavy hydrocarbon-based emulsion in a second predetermined proportion and at a first predetermined mixing speed and for a predetermined period of time. The conditioned slurry is then cleaned by a froth flotation method to form a clean coal froth and then the froth is dewatered by vacuum filtration or a centrifugation process to form reconstituted products that are dried to dust-less clumps prior to combustion.

Mixed Methods in CAM Research: A Systematic Review of Studies Published in 2012

PubMed Central

Bishop, Felicity L.; Holmes, Michelle M.

2013-01-01

Background. Mixed methods research uses qualitative and quantitative methods together in a single study or a series of related studies. Objectives. To review the prevalence and quality of mixed methods studies in complementary medicine. Methods. All studies published in the top 10 integrative and complementary medicine journals in 2012 were screened. The quality of mixed methods studies was appraised using a published tool designed for mixed methods studies. Results. 4% of papers (95 out of 2349) reported mixed methods studies, 80 of which met criteria for applying the quality appraisal tool. The most popular formal mixed methods design was triangulation (used by 74% of studies), followed by embedded (14%), sequential explanatory (8%), and finally sequential exploratory (5%). Quantitative components were generally of higher quality than qualitative components; when quantitative components involved RCTs they were of particularly high quality. Common methodological limitations were identified. Most strikingly, none of the 80 mixed methods studies addressed the philosophical tensions inherent in mixing qualitative and quantitative methods. Conclusions and Implications. The quality of mixed methods research in CAM can be enhanced by addressing philosophical tensions and improving reporting of (a) analytic methods and reflexivity (in qualitative components) and (b) sampling and recruitment-related procedures (in all components). PMID:24454489

The Effect of Process Oriented Writing Activities on the Achievement and Attitude of the Preservice Primary School Teachers: An Example of Mixed Method Study

ERIC Educational Resources Information Center

Özenç, Emine Gül

2016-01-01

The purpose of this study is to find out whether process oriented writing exercises/activities have any effect on the achievement and attitude of preservice teachers as well as to set forth the opinions of primary preservice teachers on process oriented writing approach. In the research one classroom was designated as experimental group (N = 35)…

Using mixed methods when researching communities.

PubMed

Ochieng, Bertha M N; Meetoo, Danny

2015-09-01

To argue for the use of mixed methods when researching communities. Although research involving minority communities is now advanced, not enough effort has been made to formulate methodological linkages between qualitative and quantitative methods in most studies. For instance, the quantitative approaches used by epidemiologists and others in examining the wellbeing of communities are usually empirical. While the rationale for this is sound, quantitative findings can be expanded with data from in-depth qualitative approaches, such as interviews or observations, which are likely to provide insights into the experiences of people in those communities and their relationships with their wellbeing. Academic databases including The Cochrane Library, MEDLINE, CINAHL, AMED, INTERNURSE, Science Direct, Web of Knowledge and PubMed. An iterative process of identifying eligible literature was carried out by comprehensively searching electronic databases. Using mixed-methods approaches is likely to address any potential drawbacks of individual methods by exploiting the strengths of each at the various stages of research. Combining methods can provide additional ways of looking at a complex problem and improve the understanding of a community's experiences. However, it is important for researchers to use the different methods interactively during their research. The use of qualitative and quantitative methods is likely to enrich our understanding of the interrelationship between wellbeing and the experiences of communities. This should help researchers to explore socio-cultural factors and experiences of health and healthcare practice more effectively.

Application of 1 D Finite Element Method in Combination with Laminar Solution Method for Pipe Network Analysis

NASA Astrophysics Data System (ADS)

Dudar, O. I.; Dudar, E. S.

2017-11-01

The features of application of the 1D dimensional finite element method (FEM) in combination with the laminar solutions method (LSM) for the calculation of underground ventilating networks are considered. In this case the processes of heat and mass transfer change the properties of a fluid (binary vapour-air mix). Under the action of gravitational forces it leads to such phenomena as natural draft, local circulation, etc. The FEM relations considering the action of gravity, the mass conservation law, the dependence of vapour-air mix properties on the thermodynamic parameters are derived so that it allows one to model the mentioned phenomena. The analogy of the elastic and plastic rod deformation processes to the processes of laminar and turbulent flow in a pipe is described. Owing to this analogy, the guaranteed convergence of the elastic solutions method for the materials of plastic type means the guaranteed convergence of the LSM for any regime of a turbulent flow in a rough pipe. By means of numerical experiments the convergence rate of the FEM - LSM is investigated. This convergence rate appeared much higher than the convergence rate of the Cross - Andriyashev method. Data of other authors on the convergence rate comparison for the finite element method, the Newton method and the method of gradient are provided. These data allow one to conclude that the FEM in combination with the LSM is one of the most effective methods of calculation of hydraulic and ventilating networks. The FEM - LSM has been used for creation of the research application programme package “MineClimate” allowing to calculate the microclimate parameters in the underground ventilating networks.

Searching for rigour in the reporting of mixed methods population health research: a methodological review.

PubMed

Brown, K M; Elliott, S J; Leatherdale, S T; Robertson-Wilson, J

2015-12-01

The environments in which population health interventions occur shape both their implementation and outcomes. Hence, when evaluating these interventions, we must explore both intervention content and context. Mixed methods (integrating quantitative and qualitative methods) provide this opportunity. However, although criteria exist for establishing rigour in quantitative and qualitative research, there is poor consensus regarding rigour in mixed methods. Using the empirical example of school-based obesity interventions, this methodological review examined how mixed methods have been used and reported, and how rigour has been addressed. Twenty-three peer-reviewed mixed methods studies were identified through a systematic search of five databases and appraised using the guidelines for Good Reporting of a Mixed Methods Study. In general, more detailed description of data collection and analysis, integration, inferences and justifying the use of mixed methods is needed. Additionally, improved reporting of methodological rigour is required. This review calls for increased discussion of practical techniques for establishing rigour in mixed methods research, beyond those for quantitative and qualitative criteria individually. A guide for reporting mixed methods research in population health should be developed to improve the reporting quality of mixed methods studies. Through improved reporting, mixed methods can provide strong evidence to inform policy and practice. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please email: journals.permissions@oup.com.

RO1 Funding for Mixed Methods Research: Lessons learned from the Mixed-Method Analysis of Japanese Depression Project

PubMed Central

Arnault, Denise Saint; Fetters, Michael D.

2013-01-01

Mixed methods research has made significant in-roads in the effort to examine complex health related phenomenon. However, little has been published on the funding of mixed methods research projects. This paper addresses that gap by presenting an example of an NIMH funded project using a mixed methods QUAL-QUAN triangulation design entitled “The Mixed-Method Analysis of Japanese Depression.” We present the Cultural Determinants of Health Seeking model that framed the study, the specific aims, the quantitative and qualitative data sources informing the study, and overview of the mixing of the two studies. Finally, we examine reviewer's comments and our insights related to writing mixed method proposal successful for achieving RO1 level funding. PMID:25419196

Making MgO/SiO2 Glasses By The Sol-Gel Process

NASA Technical Reports Server (NTRS)

Bansal, Narottam P.

1989-01-01

Silicon dioxide glasses containing 15 mole percent magnesium oxide prepared by sol-gel process. Not made by conventional melting because ingredients immiscible liquids. Synthesis of MgO/SiO2 glass starts with mixing of magnesium nitrate hexahydrate with silicon tetraethoxide, both in alcohol. Water added, and transparent gel forms. Subsequent processing converts gel into glass. Besides producing glasses of new composition at lower processing temperatures, sol-gel method leads to improved homogeneity and higher purity.

Mixed-layered bismuth-oxygen-iodine materials for capture and waste disposal of radioactive iodine

DOEpatents

Krumhansl, James L; Nenoff, Tina M

2013-02-26

Materials and methods of synthesizing mixed-layered bismuth oxy-iodine materials, which can be synthesized in the presence of aqueous radioactive iodine species found in caustic solutions (e.g. NaOH or KOH). This technology provides a one-step process for both iodine sequestration and storage from nuclear fuel cycles. It results in materials that will be durable for repository conditions much like those found in Waste Isolation Pilot Plant (WIPP) and estimated for Yucca Mountain (YMP). By controlled reactant concentrations, optimized compositions of these mixed-layered bismuth oxy-iodine inorganic materials are produced that have both a high iodine weight percentage and a low solubility in groundwater environments.

Twelve tips for getting started using mixed methods in medical education research.

PubMed

Lavelle, Ellen; Vuk, Jasna; Barber, Carolyn

2013-04-01

Mixed methods research, which is gaining popularity in medical education, provides a new and comprehensive approach for addressing teaching, learning, and evaluation issues in the field. The aim of this article is to provide medical education researchers with 12 tips, based on consideration of current literature in the health professions and in educational research, for conducting and disseminating mixed methods research. Engaging in mixed methods research requires consideration of several major components: the mixed methods paradigm, types of problems, mixed method designs, collaboration, and developing or extending theory. Mixed methods is an ideal tool for addressing a full range of problems in medical education to include development of theory and improving practice.

Method for processing aqueous wastes

DOEpatents

Pickett, John B.; Martin, Hollis L.; Langton, Christine A.; Harley, Willie W.

1993-01-01

A method for treating waste water such as that from an industrial processing facility comprising the separation of the waste water into a dilute waste stream and a concentrated waste stream. The concentrated waste stream is treated chemically to enhance precipitation and then allowed to separate into a sludge and a supernate. The supernate is skimmed or filtered from the sludge and blended with the dilute waste stream to form a second dilute waste stream. The sludge remaining is mixed with cementitious material, rinsed to dissolve soluble components, then pressed to remove excess water and dissolved solids before being allowed to cure. The dilute waste stream is also chemically treated to decompose carbonate complexes and metal ions and then mixed with cationic polymer to cause the precipitated solids to flocculate. Filtration of the flocculant removes sufficient solids to allow the waste water to be discharged to the surface of a stream. The filtered material is added to the sludge of the concentrated waste stream. The method is also applicable to the treatment and removal of soluble uranium from aqueous streams, such that the treated stream may be used as a potable water supply.

Technique for forcing high Reynolds number isotropic turbulence in physical space

NASA Astrophysics Data System (ADS)

Palmore, John A.; Desjardins, Olivier

2018-03-01

Many common engineering problems involve the study of turbulence interaction with other physical processes. For many such physical processes, solutions are expressed most naturally in physical space, necessitating the use of physical space solutions. For simulating isotropic turbulence in physical space, linear forcing is a commonly used strategy because it produces realistic turbulence in an easy-to-implement formulation. However, the method resolves a smaller range of scales on the same mesh than spectral forcing. We propose an alternative approach for turbulence forcing in physical space that uses the low-pass filtered velocity field as the basis of the forcing term. This method is shown to double the range of scales captured by linear forcing while maintaining the flexibility and low computational cost of the original method. This translates to a 60% increase of the Taylor microscale Reynolds number on the same mesh. An extension is made to scalar mixing wherein a scalar field is forced to have an arbitrarily chosen, constant variance. Filtered linear forcing of the scalar field allows for control over the length scale of scalar injection, which could be important when simulating scalar mixing.

Large-scale production of lipoplexes with long shelf-life.

PubMed

Clement, Jule; Kiefer, Karin; Kimpfler, Andrea; Garidel, Patrick; Peschka-Süss, Regine

2005-01-01

The instability of lipoplex formulations is a major obstacle to overcome before their commercial application in gene therapy. In this study, a continuous mixing technique for the large-scale preparation of lipoplexes followed by lyophilisation for increased stability and shelf-life has been developed. Lipoplexes were analysed for transfection efficiency and cytotoxicity in human aorta smooth muscle cells (HASMC) and a rat smooth muscle cell line (A-10 SMC). Homogeneity of lipid/DNA-products was investigated by photon correlation spectroscopy (PCS) and cryotransmission electron microscopy (cryo-TEM). Studies have been undertaken with DAC-30, a composition of 3beta-[N-(N,N'-dimethylaminoethane)-carbamoyl]-cholesterol (DAC-Chol) and dioleylphosphatidylethanolamine (DOPE) and a green fluorescent protein (GFP) expressing marker plasmid. A continuous mixing technique was compared to the small-scale preparation of lipoplexes by pipetting. Individual steps of the continuous mixing process were evaluated in order to optimise the manufacturing technique: lipid/plasmid ratio, composition of transfection medium, pre-treatment of the lipid, size of the mixing device, mixing procedure and the influence of the lyophilisation process. It could be shown that the method developed for production of lipoplexes on a large scale under sterile conditions led to lipoplexes with good transfection efficiencies combined with low cytotoxicity, improved characteristics and long shelf-life.

A Method of Visualizing Three-Dimensional Distribution of Yeast in Bread Dough

NASA Astrophysics Data System (ADS)

Maeda, Tatsurou; Do, Gab-Soo; Sugiyama, Junichi; Oguchi, Kosei; Shiraga, Seizaburou; Ueda, Mitsuyoshi; Takeya, Koji; Endo, Shigeru

A novel technique was developed to monitor the change in three-dimensional (3D) distribution of yeast in frozen bread dough samples in accordance with the progress of mixing process. Application of a surface engineering technology allowed the identification of yeast in bread dough by bonding EGFP (Enhanced Green Fluorescent Protein) to the surface of yeast cells. The fluorescent yeast (a biomarker) was recognized as bright spots at the wavelength of 520 nm. A Micro-Slicer Image Processing System (MSIPS) with a fluorescence microscope was utilized to acquire cross-sectional images of frozen dough samples sliced at intervals of 1 μm. A set of successive two-dimensional images was reconstructed to analyze 3D distribution of yeast. Samples were taken from each of four normal mixing stages (i.e., pick up, clean up, development, and final stages) and also from over mixing stage. In the pick up stage yeast distribution was uneven with local areas of dense yeast. As the mixing progressed from clean up to final stages, the yeast became more evenly distributed throughout the dough sample. However, the uniformity in yeast distribution was lost in the over mixing stage possibly due to the breakdown of gluten structure within the dough sample.

Biological Properties of Fucoxanthin in Oil Recovered from Two Brown Seaweeds Using Supercritical CO2 Extraction

PubMed Central

Periaswamy Sivagnanam, Saravana; Yin, Shipeng; Choi, Jae Hyung; Park, Yong Beom; Woo, Hee Chul; Chun, Byung Soo

2015-01-01

The bioactive materials in brown seaweeds hold great interest for developing new drugs and healthy foods. The oil content in brown seaweeds (Saccharina japonica and Sargassum horneri) was extracted by using environmentally friendly supercritical CO2 (SC-CO2) with ethanol as a co-solvent in a semi-batch flow extraction process and compared the results with a conventional extraction process using hexane, ethanol, and acetone mixed with methanol (1:1, v/v). The SC-CO2 method was used at a temperature of 45 °C and pressure of 250 bar. The flow rate of CO2 (27 g/min) was constant for the entire extraction period of 2 h. The obtained oil from the brown seaweeds was analyzed to determine their valuable compounds such as fatty acids, phenolic compounds, fucoxanthin and biological properties including antioxidant, antimicrobial, and antihypertension effects. The amounts of fucoxanthin extracted from the SC-CO2 oils of S. japonica and S. horneri were 0.41 ± 0.05 and 0.77 ± 0.07 mg/g, respectively. High antihypertensive activity was detected when using mixed acetone and methanol, whereas the phenolic content and antioxidant property were higher in the oil extracted by SC-CO2. The acetone–methanol mix extracts exhibited better antimicrobial activities than those obtained by other means. Thus, the SC-CO2 extraction process appears to be a good method for obtaining valuable compounds from both brown seaweeds, and showed stronger biological activity than that obtained by the conventional extraction process. PMID:26035021

Biological Properties of Fucoxanthin in Oil Recovered from Two Brown Seaweeds Using Supercritical CO2 Extraction.

PubMed

Sivagnanam, Saravana Periaswamy; Yin, Shipeng; Choi, Jae Hyung; Park, Yong Beom; Woo, Hee Chul; Chun, Byung Soo

2015-05-29

The bioactive materials in brown seaweeds hold great interest for developing new drugs and healthy foods. The oil content in brown seaweeds (Saccharina japonica and Sargassum horneri) was extracted by using environmentally friendly supercritical CO2 (SC-CO2) with ethanol as a co-solvent in a semi-batch flow extraction process and compared the results with a conventional extraction process using hexane, ethanol, and acetone mixed with methanol (1:1, v/v). The SC-CO2 method was used at a temperature of 45 °C and pressure of 250 bar. The flow rate of CO2 (27 g/min) was constant for the entire extraction period of 2 h. The obtained oil from the brown seaweeds was analyzed to determine their valuable compounds such as fatty acids, phenolic compounds, fucoxanthin and biological properties including antioxidant, antimicrobial, and antihypertension effects. The amounts of fucoxanthin extracted from the SC-CO2 oils of S. japonica and S. horneri were 0.41 ± 0.05 and 0.77 ± 0.07 mg/g, respectively. High antihypertensive activity was detected when using mixed acetone and methanol, whereas the phenolic content and antioxidant property were higher in the oil extracted by SC-CO2. The acetone-methanol mix extracts exhibited better antimicrobial activities than those obtained by other means. Thus, the SC-CO2 extraction process appears to be a good method for obtaining valuable compounds from both brown seaweeds, and showed stronger biological activity than that obtained by the conventional extraction process.

Mathematical modeling of the crack growth in linear elastic isotropic materials by conventional fracture mechanics approaches and by molecular dynamics method: crack propagation direction angle under mixed mode loading

NASA Astrophysics Data System (ADS)

Stepanova, Larisa; Bronnikov, Sergej

2018-03-01

The crack growth directional angles in the isotropic linear elastic plane with the central crack under mixed-mode loading conditions for the full range of the mixity parameter are found. Two fracture criteria of traditional linear fracture mechanics (maximum tangential stress and minimum strain energy density criteria) are used. Atomistic simulations of the central crack growth process in an infinite plane medium under mixed-mode loading using Large-scale Molecular Massively Parallel Simulator (LAMMPS), a classical molecular dynamics code, are performed. The inter-atomic potential used in this investigation is Embedded Atom Method (EAM) potential. The plane specimens with initial central crack were subjected to Mixed-Mode loadings. The simulation cell contains 400000 atoms. The crack propagation direction angles under different values of the mixity parameter in a wide range of values from pure tensile loading to pure shear loading in a wide diapason of temperatures (from 0.1 К to 800 К) are obtained and analyzed. It is shown that the crack propagation direction angles obtained by molecular dynamics method coincide with the crack propagation direction angles given by the multi-parameter fracture criteria based on the strain energy density and the multi-parameter description of the crack-tip fields.

Expectant parents' views of factors influencing infant feeding decisions in the antenatal period: A systematic review.

PubMed

Roll, Coralie L; Cheater, Francine

2016-08-01

To explore the factors that influence expectant parents' infant feeding decisions in the antenatal period. Mixed method systematic review focussing on participant views data. CINAHL, Medline, Embase and PsychInfo databases were interrogated using initial keywords and then refined terms to elicit relevant studies. Reference lists were checked and hand-searching was undertaken for 2 journals ('Midwifery' and 'Social Science and Medicine') covering a 3 year time period (January 2011-March 2014). Key inclusion criteria: studies reflecting expectant parents' views of the factors influencing their infant feeding decisions in the antenatal period; Studies in the English language published after 1990, from developed countries and of qualitative, quantitative or mixed method design. A narrative interpretive synthesis of the views data from studies of qualitative, quantitative and mixed method design. Data were extracted on study characteristics and parents' views, using the Social Ecological Model to support data extraction and thematic synthesis. Synthesis was influenced by the Evidence for Policy and Practice Information and Co-Ordinating Centre approach to mixed method reviews. Of the 409 studies identified through search methods, 17 studies met the inclusion criteria for the review. Thematic synthesis identified 9 themes: Bonding/Attachment; Body Image; Self Esteem/Confidence; Female Role Models; Family and Support Network; Lifestyle; Formal Information Sources; Knowledge; and Feeding in front of others/Public. The review identified a significant bias in the data towards negative factors relating to the breastfeeding decision, suggesting that infant feeding was not a choice between two feeding options, but rather a process of weighing reasons for and against breastfeeding. Findings reflected the perception of the maternal role as intrinsic to the expectant mothers' infant feeding decisions. Cultural perceptions permeated personal, familial and social influences on the decision-making process. Expectant mothers were sensitive to the way professionals attempted to support and inform them about infant feeding choices. By taking a Social Ecological perspective, we were able to explore and demonstrate the multiple influences impacting on expectant parents in the decision-making process. A better understanding of expectant parents' views and experiences in making infant feeding decisions in the prenatal and antenatal periods will inform public health policy and the coordination of service provision to support infant feeding activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

27 CFR 19.778 - Removal on or after January 1, 1987 of Puerto Rican and Virgin Islands spirits, and rum imported...

Code of Federal Regulations, 2010 CFR

2010-04-01

... contained in products mixed in processing with other alcoholic ingredients may be determined by using the methods provided in paragraphs (b), (c), or (d) of this section. The proprietor shall report these...) Standard method. For purposes of the separate accounts, quantities of spirits in the above categories may...

Fabrication of ionic liquid electrodeposited Cu--Sn--Zn--S--Se thin films and method of making

DOEpatents

Bhattacharya, Raghu Nath

2016-01-12

A semiconductor thin-film and method for producing a semiconductor thin-films comprising a metallic salt, an ionic compound in a non-aqueous solution mixed with a solvent and processing the stacked layer in chalcogen that results in a CZTS/CZTSS thin films that may be deposited on a substrate is disclosed.

Pre-Service Teachers' Practices towards Digital Game Design for Technology Integration into Science Classrooms

ERIC Educational Resources Information Center

Uluay, Gulsah; Dogan, Alev

2016-01-01

The main purpose of the study is to introduce Kodu Game Lab that is created by Microsoft as an example for technology integration into learning process to pre-service science teachers with MAGDAIRE framework. The participants were in a special teaching methods course at a university in Turkey during the fall 2015 semester. Mix method research…

High solids fermentation reactor

DOEpatents

Wyman, Charles E.; Grohmann, Karel; Himmel, Michael E.; Richard, Christopher J.

1993-03-02

A fermentation reactor and method for fermentation of materials having greater than about 10% solids. The reactor includes a rotatable shaft along the central axis, the shaft including rods extending outwardly to mix the materials. The reactor and method are useful for anaerobic digestion of municipal solid wastes to produce methane, for production of commodity chemicals from organic materials, and for microbial fermentation processes.

High solids fermentation reactor

DOEpatents

Wyman, Charles E.; Grohmann, Karel; Himmel, Michael E.; Richard, Christopher J.

1993-01-01

A fermentation reactor and method for fermentation of materials having greater than about 10% solids. The reactor includes a rotatable shaft along the central axis, the shaft including rods extending outwardly to mix the materials. The reactor and method are useful for anaerobic digestion of municipal solid wastes to produce methane, for production of commodity chemicals from organic materials, and for microbial fermentation processes.

It's Been Mostly about Money! A Multi-Method Research Approach to the Sources of Institutionalization

ERIC Educational Resources Information Center

Bértoa, Fernando Casal

2017-01-01

Although much has been written about the process of party system institutionalization in different regions, the reasons why some party systems institutionalize while others do not still remain a mystery. Seeking to fill this lacuna in the literature, and using a mixed-methods research approach, this article constitutes a first attempt to answer…

Drowning-out crystallisation of sodium sulphate using aqueous two-phase systems.

PubMed

Taboada, M E; Graber, T A; Asenjo, J A; Andrews, B A

2000-06-23

A novel method to obtain crystals of pure, anhydrous salt, using aqueous two-phase systems was studied. A concentrated salt solution is mixed with polyethylene glycol (PEG), upon which three phases are formed: salt crystals, a PEG-rich liquid and a salt-rich liquid. After removal of the solid salt, a two-phase system is obtained. Both liquid phases are recycled, allowing the design of a continuous process, which could be exploited industrially. The phase diagram of the system water-Na2SO4-PEG 3350 at 28 degrees C was used. Several process alternatives are proposed and their economic potential is discussed. The process steps needed to produce sodium sulphate crystals include mixing, crystallisation, settling and, optionally, evaporation of water. The yield of sodium sulphate increases dramatically if an evaporation step is used.

A new method of tree xylem water extraction for isotopic analysis

NASA Astrophysics Data System (ADS)

Gierke, C.; Newton, B. T.

2011-12-01

The Sacramento Mountain Watershed Study in the southern Sacramento Mountains of New Mexico is designed to assess the forest restoration technique of tree thinning in mountain watersheds as an effective method of increasing local and regional groundwater recharge. The project is using a soil water balance approach to quantify the partitioning of local precipitation within this watershed before and after thinning trees. Understanding what sources trees extract their water from (e.g. shallow groundwater, unsaturated fractured bedrock, and soils) is difficult due to a complex hydrologic system and heterogeneous distribution of soil thicknesses. However, in order to accurately quantify the soil water balance and to assess how thinning trees will affect this water balance, it is important determine the sources from which trees extract their water. We plan to use oxygen and hydrogen stable isotopic analysis of various end member waters to identify these different sources. We are in the process of developing a new method of determining the isotopic composition of tree water that has several advantages over conventional methods. Within the tree there is the xylem which transports water from the roots to the leaves and the phloem which transports starches and sugars in a water media throughout the tree. Previous studies have shown that the isotopic composition of xylem water accurately reflects that of source water, while phloem water has undergone isotopic fractionation during photosynthesis and metabolism. The distillation of water from twigs, which is often used to extract tree water for isotopic analysis, is very labor intensive. Other disadvantages to distillation methods include possible fractionation due to phase changes and the possible extraction of fractionated phloem waters. Employing a new mixing method, the composition of the twig water (TW) can be determined by putting twigs of unknown isotopic water composition into waters of known compositions or initial waters (IW), allowing diffusive processes to proceed to equilibrium, measuring the composition of the resulting mixture or final water (FW) then, solving a simple mixing equation. To evaluate this method, we collected several twig samples from Douglas Firs in the Sacramento Mountains. Twig water was prepared for isotopic analysis both by cryogenic distillation and the mixing method. Soil in close proximity to these trees was also sampled and water was extracted by cryogenic distillation. Preliminary results show that the isotopic composition of distilled twig water and soil waters plot to the right of the local meteoric water line (LMWL) suggesting that trees are extracting shallow evaporated soil water. Twig water obtained from the mixing method plot near the LMWL within the range expected for local snow melt, suggesting a possibly deeper non-evaporated source. In general, distillation values are approximately 4% heavier with respect to delta 18O than waters obtained from the mixing method. It is possible that this difference is due to the contribution of the fractionated water of the twig phloem that is released during the distillation process. This difference is quite significant and can lead to very different interpretations. These results are being addressed with additional experiments.

Mixed-methods research in pharmacy practice: recommendations for quality reporting. Part 2.

PubMed

Hadi, Muhammad Abdul; Alldred, David Phillip; Closs, S José; Briggs, Michelle

2014-02-01

This is the second of two papers that explore the use of mixed-methods research in pharmacy practice. This paper discusses the rationale, applications, limitations and challenges of conducting mixed-methods research. As with other research methods, the choice of mixed-methods should always be justified because not all research questions require a mixed-methods approach. Mixed-methods research is particularly suitable when one dataset may be inadequate in answering the research question, an explanation of initial results is required, generalizability of qualitative findings is desired or broader and deeper understanding of a research problem is necessary. Mixed-methods research has its own challenges and limitations, which should be considered carefully while designing the study. There is a need to improve the quality of reporting of mixed-methods research. A framework for reporting mixed-methods research is proposed, for researchers and reviewers, with the intention of improving its quality. Pharmacy practice research can benefit from research that uses both 'numbers' (quantitative) and 'words' (qualitative) to develop a strong evidence base to support pharmacy-led services. © 2013 Royal Pharmaceutical Society.

Hybrid Mixed Media Nonwovens: An Investigation of Structure-Property Relationships

NASA Astrophysics Data System (ADS)

Hollowell, Kendall Birckhead

There have been myriad studies on utilizing bicomponent splittables produced through spunbond/spunlace processes. These production methods have proven to yield microfibers which increase the surface area of the nonwoven structures. There has been recent focus on studying the microfibers within these nonwoven structures as well as using a multiplicity of deniers of fibers within the nonwoven. There have also been studies on producing nonwovens with fibers of differing cross-sectional shapes and diameters. The purpose of this study is to examine the properties of a nonwoven structure, marrying the concepts of multi-denier fibers with multi-shaped fibers in two configurations: three-layer and alternating. The basis for this study will be US Patent 6,964,931 B2 "Method of making Continuous Filament Web with Statistical Filament Distribution" as well as US Patent 7,981,336 B2 "Process of Making Mixed Fibers and Nonwoven Fabrics". This study addresses the melt-spinning and hydroentanglement of nonwoven webs made from bicomponent fibers in three-layer and alternating configurations. The bicomponent cross-sections that will be used include 16-segmented pie and 7-islands-in-the-sea. In this study the establishment of the utility of mixed media nonwovens will take place through property and structure analysis in order to determine the inherent properties of the mixed media structures as well as the structure-property relationships of the nonwoven fabric. Property and structure analysis will also take place on mixed media structures containing poly(lactic acid) as a sacrificial component in the bicomponent fiber after optimizing the removal conditions of the poly(lactic acid) in a sodium hydroxide (NaOH) bath.

Thermal and sonochemical synthesis of porous (Ce,Zr)O2 mixed oxides from metal β-diketonate precursors and their catalytic activity in wet air oxidation process of formic acid.

PubMed

Cau, Camille; Guari, Yannick; Chave, Tony; Larionova, Joulia; Nikitenko, Sergey I

2014-07-01

Porous (Ce0.5Zr0.5)O2 solid solutions were prepared by thermolysis (T=285 °C) or sonolysis (20 kHz, I=32 W cm(-2), Pac=0.46 W mL(-1), T=200 °C) of Ce(III) and Zr(IV) acetylacetonates in oleylamine or hexadecylamine under argon followed by heat treatment of the precipitates obtained in air at 450 °C. Transmission Electron Microscopy images of the samples show nanoparticles of ca. 4-6 nm for the two synthetic approaches. The powder X-ray diffraction, scanning electron microscopy, energy dispersive X-ray and μ-Raman spectroscopy of solids obtained after heat treatment indicate the formation of (Ce0.5Zr0.5)O2 solid solutions with a metastable tetragonal crystal structure for the two synthetic routes. The specific surface area of the samples varies between 78 and 149 m(2) g(-1) depending on synthesis conditions. The use of Barrett-Joyner-Halenda and t-plot methods reveal the formation of mixed oxides with a hybrid morphology that combines mesoporosity and microporosity regardless of the method of preparation. Platinum nanoparticles were deposited on the surface of the mixed oxides by sonochemical reduction of Pt(IV). It was found that the materials prepared by sonochemistry exhibit better resistance to dissolution during the deposition process of platinum. X-ray photoelectron spectroscopy analysis shows the presence of Pt(0) and Pt(II) on the surface of mixed oxides. Porous (Ce0.5Zr0.5)O2 mixed oxides loaded with 1.5%wt. platinum exhibit high activity in catalytic wet air oxidation of formic acid at 40 °C. Copyright © 2014 Elsevier B.V. All rights reserved.

System and method for investigating sub-surface features of a rock formation using compressional acoustic sources

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vu, Cung Khac; Skelt, Christopher; Nihei, Kurt

A system and method for investigating rock formations outside a borehole are provided. The method includes generating a first compressional acoustic wave at a first frequency by a first acoustic source; and generating a second compressional acoustic wave at a second frequency by a second acoustic source. The first and the second acoustic sources are arranged within a localized area of the borehole. The first and the second acoustic waves intersect in an intersection volume outside the borehole. The method further includes receiving a third shear acoustic wave at a third frequency, the third shear acoustic wave returning to themore » borehole due to a non-linear mixing process in a non-linear mixing zone within the intersection volume at a receiver arranged in the borehole. The third frequency is equal to a difference between the first frequency and the second frequency.« less

Field Data Collection Methods and Data Processing of the Influence of Low Momentum Ratio and the Rate of Sediment Transport Forcing on Confluence Hydrodynamics, Morphodynamics and Mixing

NASA Astrophysics Data System (ADS)

Moradi, Gelare; Cardot, Romain; Lane, Stuart; Rennie, Colin

2017-04-01

River confluences are zones where two or more rivers join and form a single channel downstream of their junction. Because of their essential role in the dynamic of fluvial networks, there has been an increase in the attention given to their hydrodynamics and morphodynamics during last three decades. Despite this increased understanding of the complex flow behavior and morphological aspects, few studies has been focused on low momentum ratio river confluences and mixing processes. As among these few studies, most of them have been driven by the mean of laboratory experiments and numerical models, a combination of field data collection and data processing is required to study the effect of low momentum ratio on flow dynamic, rive morphology and rate of mixing in river confluences. In the present poster, the flow discharge and velocity data of two upper Rhône river confluences in Switzerland, which are characterized by low momentum ratio and a varied rate of poorly sorted sediment transport is shown. The data set is mostly collected, using spatial distributed acoustic Doppler current profiling (aDcp) measurements. The morphological changes are studied using a combination of high-resolution aerial imagery data obtained by a phantom drone and acoustic bathymetric surveys. The mixing processes are investigated by measuring the surface water temperature with a thermic camera mounted on an E-bee drone [, whereas sediment pathways can be explored through the use of the 'bottom-tracking' feature of the aDcp device (not sure there will be such results at the conference time)]. These collected data is processed using a matlab code, Pix4D and visualization software. These processed data then can be used to describe the flow behavior, morphological aspects and mixing processes at river confluences characterized by low momentum ratio and to test laboratory derived conceptual models of flow processes at such junctions. The obtained results can be used under a wider range of forcing conditions to provide detailed data on the three-dimensional flow field and the morphology, to validate numerical models.

Problem of the thermodynamic status of the mixed-layer minerals

USGS Publications Warehouse

Zen, E.-A.

1962-01-01

Minerals that show mixed layering, particularly with the component layers in random sequence, pose problems because they may behave thermodynamically as single phases or as polyphase aggregates. Two operational criteria are proposed for their distinction. The first scheme requires two samples of mixed-layer material which differ only in the proportions of the layers. If each of these two samples are allowed to equilibrate with the same suitably chosen monitoring solution, then the intensive parameters of the solution will be invariant if the mixed-layer sample is a polyphase aggregate, but not otherwise. The second scheme makes use of the fact that portions of many titration curves of clay minerals show constancy of the chemical activities of the components in the equilibrating solutions, suggesting phase separation. If such phase separation occurs for a mixed-layer material, then, knowing the number of independent components in the system, it should be possible to decide on the number of phases the mixed-layer material represents. Knowledge of the phase status of mixed-layer material is essential to the study of the equilibrium relations of mineral assemblages involving such material, because a given mixed-layer mineral will be plotted and treated differently on a phase diagram, depending on whether it is a single phase or a polyphase aggregate. Extension of the titration technique to minerals other than the mixed-layer type is possible. In particular, this method may be used to determine if cryptoperthites and peristerites are polyphase aggregates. In general, for any high-order phase separation, the method may be used to decide just at what point in this continuous process the system must be regarded operationally as a polyphase aggregate. ?? 1962.

Comparison of solution-mixed and sequentially processed P3HT: F4TCNQ films: effect of doping-induced aggregation on film morphology

DOE PAGES

Jacobs, Ian E.; Aasen, Erik W.; Oliveira, Julia L.; ...

2016-03-23

Doping polymeric semiconductors often drastically reduces the solubility of the polymer, leading to difficulties in processing doped films. Here, we compare optical, electrical, and morphological properties of P3HT films doped with F4TCNQ, both from mixed solutions and using sequential solution processing with orthogonal solvents. We demonstrate that sequential doping occurs rapidly (<1 s), and that the film doping level can be precisely controlled by varying the concentration of the doping solution. Furthermore, the choice of sequential doping solvent controls whether dopant anions are included or excluded from polymer crystallites. Atomic force microscopy (AFM) reveals that sequential doping produces significantly moremore » uniform films on the nanoscale than the mixed-solution method. In addition, we show that mixed-solution doping induces the formation of aggregates even at low doping levels, resulting in drastic changes to film morphology. Sequentially coated films show 3–15 times higher conductivities at a given doping level than solution-doped films, with sequentially doped films processed to exclude dopant anions from polymer crystallites showing the highest conductivities. In conclusion, we propose a mechanism for doping induced aggregation in which the shift of the polymer HOMO level upon aggregation couples ionization and solvation energies. To show that the methodology is widely applicable, we demonstrate that several different polymer:dopant systems can be prepared by sequential doping.« less

Comparison of solution-mixed and sequentially processed P3HT: F4TCNQ films: effect of doping-induced aggregation on film morphology

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jacobs, Ian E.; Aasen, Erik W.; Oliveira, Julia L.

Doping polymeric semiconductors often drastically reduces the solubility of the polymer, leading to difficulties in processing doped films. Here, we compare optical, electrical, and morphological properties of P3HT films doped with F4TCNQ, both from mixed solutions and using sequential solution processing with orthogonal solvents. We demonstrate that sequential doping occurs rapidly (<1 s), and that the film doping level can be precisely controlled by varying the concentration of the doping solution. Furthermore, the choice of sequential doping solvent controls whether dopant anions are included or excluded from polymer crystallites. Atomic force microscopy (AFM) reveals that sequential doping produces significantly moremore » uniform films on the nanoscale than the mixed-solution method. In addition, we show that mixed-solution doping induces the formation of aggregates even at low doping levels, resulting in drastic changes to film morphology. Sequentially coated films show 3–15 times higher conductivities at a given doping level than solution-doped films, with sequentially doped films processed to exclude dopant anions from polymer crystallites showing the highest conductivities. In conclusion, we propose a mechanism for doping induced aggregation in which the shift of the polymer HOMO level upon aggregation couples ionization and solvation energies. To show that the methodology is widely applicable, we demonstrate that several different polymer:dopant systems can be prepared by sequential doping.« less

Using mixed methods research in medical education: basic guidelines for researchers.

PubMed

Schifferdecker, Karen E; Reed, Virginia A

2009-07-01

Mixed methods research involves the collection, analysis and integration of both qualitative and quantitative data in a single study. The benefits of a mixed methods approach are particularly evident when studying new questions or complex initiatives and interactions, which is often the case in medical education research. Basic guidelines for when to use mixed methods research and how to design a mixed methods study in medical education research are not readily available. The purpose of this paper is to remedy that situation by providing an overview of mixed methods research, research design models relevant for medical education research, examples of each research design model in medical education research, and basic guidelines for medical education researchers interested in mixed methods research. Mixed methods may prove superior in increasing the integrity and applicability of findings when studying new or complex initiatives and interactions in medical education research. They deserve an increased presence and recognition in medical education research.

System and method for generating 3D images of non-linear properties of rock formation using surface seismic or surface to borehole seismic or both

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vu, Cung Khac; Nihei, Kurt Toshimi; Johnson, Paul A.

A system and method of characterizing properties of a medium from a non-linear interaction are include generating, by first and second acoustic sources disposed on a surface of the medium on a first line, first and second acoustic waves. The first and second acoustic sources are controllable such that trajectories of the first and second acoustic waves intersect in a mixing zone within the medium. The method further includes receiving, by a receiver positioned in a plane containing the first and second acoustic sources, a third acoustic wave generated by a non-linear mixing process from the first and second acousticmore » waves in the mixing zone; and creating a first two-dimensional image of non-linear properties or a first ratio of compressional velocity and shear velocity, or both, of the medium in a first plane generally perpendicular to the surface and containing the first line, based on the received third acoustic wave.« less

Semiconductor laser self-mixing micro-vibration measuring technology based on Hilbert transform

NASA Astrophysics Data System (ADS)

Tao, Yufeng; Wang, Ming; Xia, Wei

2016-06-01

A signal-processing synthesizing Wavelet transform and Hilbert transform is employed to measurement of uniform or non-uniform vibrations in self-mixing interferometer on semiconductor laser diode with quantum well. Background noise and fringe inclination are solved by decomposing effect, fringe counting is adopted to automatic determine decomposing level, a couple of exact quadrature signals are produced by Hilbert transform to extract vibration. The tempting potential of real-time measuring micro vibration with high accuracy and wide dynamic response bandwidth using proposed method is proven by both simulation and experiment. Advantages and error sources are presented as well. Main features of proposed semiconductor laser self-mixing interferometer are constant current supply, high resolution, simplest optical path and much higher tolerance to feedback level than existing self-mixing interferometers, which is competitive for non-contact vibration measurement.

Facilitation Standards: A Mixed Methods Study

ERIC Educational Resources Information Center

Hunter, Jennifer

2017-01-01

Online education is increasing as a solution to manage ever increasing enrollment numbers at higher education institutions. Intentionally and thoughtfully constructed courses allow students to improve performance through practice and self-assessment and instructors benefit from improving consistency in providing content and assessing process,…

Early strength prediction of concrete based on accelerated curing methods : final report.

DOT National Transportation Integrated Search

1995-12-01

Concrete mix designs and components may currently be changed during the course of a project. The possible negative effects of such changes on concrete strength, are not determined under the current plant control/project control process. Also, the cur...

Why, and how, mixed methods research is undertaken in health services research in England: a mixed methods study

PubMed Central

O'Cathain, Alicia; Murphy, Elizabeth; Nicholl, Jon

2007-01-01

Background Recently, there has been a surge of international interest in combining qualitative and quantitative methods in a single study – often called mixed methods research. It is timely to consider why and how mixed methods research is used in health services research (HSR). Methods Documentary analysis of proposals and reports of 75 mixed methods studies funded by a research commissioner of HSR in England between 1994 and 2004. Face-to-face semi-structured interviews with 20 researchers sampled from these studies. Results 18% (119/647) of HSR studies were classified as mixed methods research. In the documentation, comprehensiveness was the main driver for using mixed methods research, with researchers wanting to address a wider range of questions than quantitative methods alone would allow. Interviewees elaborated on this, identifying the need for qualitative research to engage with the complexity of health, health care interventions, and the environment in which studies took place. Motivations for adopting a mixed methods approach were not always based on the intrinsic value of mixed methods research for addressing the research question; they could be strategic, for example, to obtain funding. Mixed methods research was used in the context of evaluation, including randomised and non-randomised designs; survey and fieldwork exploratory studies; and instrument development. Studies drew on a limited number of methods – particularly surveys and individual interviews – but used methods in a wide range of roles. Conclusion Mixed methods research is common in HSR in the UK. Its use is driven by pragmatism rather than principle, motivated by the perceived deficit of quantitative methods alone to address the complexity of research in health care, as well as other more strategic gains. Methods are combined in a range of contexts, yet the emerging methodological contributions from HSR to the field of mixed methods research are currently limited to the single context of combining qualitative methods and randomised controlled trials. Health services researchers could further contribute to the development of mixed methods research in the contexts of instrument development, survey and fieldwork, and non-randomised evaluations. PMID:17570838

A Methodology for Conducting Integrative Mixed Methods Research and Data Analyses

PubMed Central

Castro, Felipe González; Kellison, Joshua G.; Boyd, Stephen J.; Kopak, Albert

2011-01-01

Mixed methods research has gained visibility within the last few years, although limitations persist regarding the scientific caliber of certain mixed methods research designs and methods. The need exists for rigorous mixed methods designs that integrate various data analytic procedures for a seamless transfer of evidence across qualitative and quantitative modalities. Such designs can offer the strength of confirmatory results drawn from quantitative multivariate analyses, along with “deep structure” explanatory descriptions as drawn from qualitative analyses. This article presents evidence generated from over a decade of pilot research in developing an integrative mixed methods methodology. It presents a conceptual framework and methodological and data analytic procedures for conducting mixed methods research studies, and it also presents illustrative examples from the authors' ongoing integrative mixed methods research studies. PMID:22167325

An Excel Macro to Plot the HFE-Diagram to Identify Sea Water Intrusion Phases.

PubMed

Giménez-Forcada, Elena; Sánchez San Román, F Javier

2015-01-01

A hydrochemical facies evolution diagram (HFE-D) is a multirectangular diagram, which is a useful tool in the interpretation of sea water intrusion processes. This method note describes a simple method for generating an HFE-D plot using the spreadsheet software package, Microsoft Excel. The code was applied to groundwater from the alluvial coastal plain of Grosseto (Tuscany, Italy), which is characterized by a complex salinization process in which sea water mixes with sulfate or bicarbonate recharge water. © 2014, National GroundWater Association.

Thermal stir welding apparatus

NASA Technical Reports Server (NTRS)

Ding, R. Jeffrey (Inventor)

2011-01-01

A welding method and apparatus are provided for forming a weld joint between first and second elements of a workpiece. The method includes heating the first and second elements to form an interface of material in a plasticized or melted state interface between the elements. The interface material is then allowed to cool to a plasticized state if previously in a melted state. The interface material, while in the plasticized state, is then mixed, for example, using a grinding/extruding process, to remove any dendritic-type weld microstructures introduced into the interface material during the heating process.

Mixed methods in psychotherapy research: A review of method(ology) integration in psychotherapy science.

PubMed

Bartholomew, Theodore T; Lockard, Allison J

2018-06-13

Mixed methods can foster depth and breadth in psychological research. However, its use remains in development in psychotherapy research. Our purpose was to review the use of mixed methods in psychotherapy research. Thirty-one studies were identified via the PRISMA systematic review method. Using Creswell & Plano Clark's typologies to identify design characteristics, we assessed each study for rigor and how each used mixed methods. Key features of mixed methods designs and these common patterns were identified: (a) integration of clients' perceptions via mixing; (b) understanding group psychotherapy; (c) integrating methods with cases and small samples; (d) analyzing clinical data as qualitative data; and (e) exploring cultural identities in psychotherapy through mixed methods. The review is discussed with respect to the value of integrating multiple data in single studies to enhance psychotherapy research. © 2018 Wiley Periodicals, Inc.

Mixed methods research in music therapy research.

PubMed

Bradt, Joke; Burns, Debra S; Creswell, John W

2013-01-01

Music therapists have an ethical and professional responsibility to provide the highest quality care possible to their patients. Much of the time, high quality care is guided by evidence-based practice standards that integrate the most current, available research in making decisions. Accordingly, music therapists need research that integrates multiple ways of knowing and forms of evidence. Mixed methods research holds great promise for facilitating such integration. At this time, there have not been any methodological articles published on mixed methods research in music therapy. The purpose of this article is to introduce mixed methods research as an approach to address research questions relevant to music therapy practice. This article describes the core characteristics of mixed methods research, considers paradigmatic issues related to this research approach, articulates major challenges in conducting mixed methods research, illustrates four basic designs, and provides criteria for evaluating the quality of mixed methods articles using examples of mixed methods research from the music therapy literature. Mixed methods research offers unique opportunities for strengthening the evidence base in music therapy. Recommendations are provided to ensure rigorous implementation of this research approach.

3D Printing of Polymer-Bonded Rare-Earth Magnets With a Variable Magnetic Compound Fraction for a Predefined Stray Field.

PubMed

Huber, Christian; Abert, Claas; Bruckner, Florian; Groenefeld, Martin; Schuschnigg, Stephan; Teliban, Iulian; Vogler, Christoph; Wautischer, Gregor; Windl, Roman; Suess, Dieter

2017-08-25

Additive manufacturing of polymer-bonded magnets is a recently developed technique, for single-unit production, and for structures that have been impossible to manufacture previously. Also, new possibilities to create a specific stray field around the magnet are triggered. The current work presents a method to 3D print polymer-bonded magnets with a variable magnetic compound fraction distribution. This means the saturation magnetization can be adjusted during the printing process to obtain a required external field of the manufactured magnets. A low-cost, end-user 3D printer with a mixing extruder is used to mix permanent magnetic filaments with pure polyamide (PA12) filaments. The magnetic filaments are compounded, extruded, and characterized for the printing process. To deduce the quality of the manufactured magnets with a variable magnetic compound fraction, an inverse stray field framework is developed. The effectiveness of the printing process and the simulation method is shown. It can also be used to manufacture magnets that produce a predefined stray field in a given region. This opens new possibilities for magnetic sensor applications. This setup and simulation framework allows the design and manufacturing of polymer-bonded permanent magnets, which are impossible to create with conventional methods.

Applications of sonochemistry in Russian food processing industry.

PubMed

Krasulya, Olga; Shestakov, Sergey; Bogush, Vladimir; Potoroko, Irina; Cherepanov, Pavel; Krasulya, Boris

2014-11-01

In food industry, conventional methodologies such as grinding, mixing, and heat treatment are used for food processing and preservation. These processes have been well studied for many centuries and used in the conversion of raw food materials to consumable food products. This report is dedicated to the application of a cost-efficient method of energy transfer caused by acoustic cavitation effects in food processing, overall, having significant impacts on the development of relatively new area of food processing such as food sonochemistry. Copyright © 2014 Elsevier B.V. All rights reserved.

Why, and how, mixed methods research is undertaken in health services research in England: a mixed methods study.

PubMed

O'Cathain, Alicia; Murphy, Elizabeth; Nicholl, Jon

2007-06-14

Recently, there has been a surge of international interest in combining qualitative and quantitative methods in a single study--often called mixed methods research. It is timely to consider why and how mixed methods research is used in health services research (HSR). Documentary analysis of proposals and reports of 75 mixed methods studies funded by a research commissioner of HSR in England between 1994 and 2004. Face-to-face semi-structured interviews with 20 researchers sampled from these studies. 18% (119/647) of HSR studies were classified as mixed methods research. In the documentation, comprehensiveness was the main driver for using mixed methods research, with researchers wanting to address a wider range of questions than quantitative methods alone would allow. Interviewees elaborated on this, identifying the need for qualitative research to engage with the complexity of health, health care interventions, and the environment in which studies took place. Motivations for adopting a mixed methods approach were not always based on the intrinsic value of mixed methods research for addressing the research question; they could be strategic, for example, to obtain funding. Mixed methods research was used in the context of evaluation, including randomised and non-randomised designs; survey and fieldwork exploratory studies; and instrument development. Studies drew on a limited number of methods--particularly surveys and individual interviews--but used methods in a wide range of roles. Mixed methods research is common in HSR in the UK. Its use is driven by pragmatism rather than principle, motivated by the perceived deficit of quantitative methods alone to address the complexity of research in health care, as well as other more strategic gains. Methods are combined in a range of contexts, yet the emerging methodological contributions from HSR to the field of mixed methods research are currently limited to the single context of combining qualitative methods and randomised controlled trials. Health services researchers could further contribute to the development of mixed methods research in the contexts of instrument development, survey and fieldwork, and non-randomised evaluations.

3D investigation on polystyrene colloidal crystals by floatage self-assembly with mixed solvent via synchrotron radiation x-ray phase-contrast computed tomography

NASA Astrophysics Data System (ADS)

Fu, Yanan; Xie, Honglan; Deng, Biao; Du, Guohao; Xiao, Tiqiao

2017-06-01

The floatage self-assembly method was introduced with mixed solvent as the medium of polystyrene sphere suspension to fabricate the colloidal crystal. The three dimensional (3D) void system of the colloidal crystal was noninvasively characterized by synchrotron radiation phase-contrast computed tomography, and the quantitative image analysis was implemented aiming to the polystyrene sphere colloidal crystal. Comparing with gravity sedimentation method, the three samples fabricated from floatage self-assembly with mixed solvents have the lowest porosity, and when ethylene glycol and water were mixed with ratio of 1:1, the lowest porosity of 27.49% could be achieved, that has been very close to the minimum porosity of ordered 3D monodisperse sphere array (26%). In single slices, the porosities and fractal dimension for the voids were calculated. The results showed that two factors would significantly influence the porosity of the whole colloidal crystal: the first deposited sphere layer's orderliness and the sedimentation speed of the spheres. The floatage self-assembly could induce a stable close-packing process, resulted from the powerful nucleation force-lateral capillary force coupled with the mixed solvent to regulate the floating upward speed for purpose of matching the assembly rate.

A Mixed Methods Content Analysis of the Research Literature in Science Education

NASA Astrophysics Data System (ADS)

Schram, Asta B.

2014-10-01

In recent years, more and more researchers in science education have been turning to the practice of combining qualitative and quantitative methods in the same study. This approach of using mixed methods creates possibilities to study the various issues that science educators encounter in more depth. In this content analysis, I evaluated 18 studies from science education journals as they relate to the definition, design, and overall practice of using mixed methods. I scrutinized a purposeful sample, derived from 3 journals (the International Journal of Science Education, the Journal of Research in Science Teaching, and the Research in Science Education) in terms of the type of data collected, timing, priority, design, the mixing of the 2 data strands in the studies, and the justifications authors provide for using mixed methods. Furthermore, the articles were evaluated in terms of how well they met contemporary definitions for mixed methods research. The studies varied considerably in the use and understanding of mixed methods. A systematic evaluation of the employment of mixed methods methodology was used to identify the studies that best reflected contemporary definitions. A comparison to earlier content analyses of mixed methods research indicates that researchers' knowledge of mixed methods methodology may be increasing. The use of this strategy in science education research calls, however, for an improved methodology, especially concerning the practice of mixing. Suggestions are given on how to best use this approach.

Examining the Affordances of Dual Cognitive Processing to Explain the Development of High School Students' Nature of Science Views

ERIC Educational Resources Information Center

Jackson, Luke M.

2017-01-01

This mixed method study was aimed at examining the influence of dual processing (Type 1 and Type 2 thinking) on the development of high school students' nature of science (NOS) views. Type 1 thinking is intuitive, experiential, and heuristic. Type 2 thinking is rational, analytical, and explicit. Three research questions were asked: (1) Do the…

An Analysis of the Reading Strategies Used by Deaf and Hearing Adults: Similarities and Differences in Phonological Processing and Metacognition

ERIC Educational Resources Information Center

Silvestri, Julia A.

2016-01-01

This study is a mixed methods analysis of reading processes and language experiences of deaf and hearing readers. The sample includes four groups each with fifteen adults--identified as: deaf/high-achieving readers, deaf/struggling/non-academic readers, hearing/high-achieving readers, and hearing/non-academic readers. The purpose of this study is…

The Perception of EFL High School Students in Using of Computer Technology in the Process of Learning: Merits and Demerits

ERIC Educational Resources Information Center

Izadpanah, Siros; Alavi, Mansooreh

2016-01-01

Recent developments in the field of computer technology have led to a renewed interest in the process of learning. In order to investigate EFL learners' perception of technology use, a mixed method design was used to explore students' attitude. Quantitative data was collected through questionnaires and qualitative data using open-ended questions.…

F-T process using an iron on mixed zirconia-titania supported catalyst

DOEpatents

Dyer, Paul N.; Nordquist, Andrew F.; Pierantozzi, Ronald

1987-01-01

A Fischer-Tropsch catalyst comprising iron co-deposited with or deposited on particles comprising a mixture of zirconia and titania, preferably formed by co-precipitation of compounds convertible to zirconia and titania, such as zirconium and titanium alkoxide. The invention also comprises the method of making this catalyst and an improved Fischer-Tropsch reaction process in which the catalyst is utilized.

Digital pulse shape discrimination.

PubMed

Miller, L F; Preston, J; Pozzi, S; Flaska, M; Neal, J

2007-01-01

Pulse-shape discrimination (PSD) has been utilised for about 40 years as a method to obtain estimates for dose in mixed neutron and photon fields. Digitizers that operate close to GHz are currently available at a reasonable cost, and they can be used to directly sample signals from photomultiplier tubes. This permits one to perform digital PSD rather than the traditional, and well-established, analogoue techniques. One issue that complicates PSD for neutrons in mixed fields is that the light output characteristics of typical scintillators available for PSD, such as BC501A, vary as a function of energy deposited in the detector. This behaviour is more easily accommodated with digital processing of signals than with analogoue signal processing. Results illustrate the effectiveness of digital PSD.

Transformative, Mixed Methods Checklist for Psychological Research with Mexican Americans

ERIC Educational Resources Information Center

Canales, Genevieve

2013-01-01

This is a description of the creation of a research methods tool, the "Transformative, Mixed Methods Checklist for Psychological Research With Mexican Americans." For conducting literature reviews of and planning mixed methods studies with Mexican Americans, it contains evaluative criteria calling for transformative mixed methods, perspectives…

Reduction in Chemotherapy Mixing Errors Using Six Sigma: Illinois CancerCare Experience.

PubMed

Heard, Bridgette; Miller, Laura; Kumar, Pankaj

2012-03-01

Chemotherapy mixing errors (CTMRs), although rare, have serious consequences. Illinois CancerCare is a large practice with multiple satellite offices. The goal of this study was to reduce the number of CTMRs using Six Sigma methods. A Six Sigma team consisting of five participants (registered nurses and pharmacy technicians [PTs]) was formed. The team had 10 hours of Six Sigma training in the DMAIC (ie, Define, Measure, Analyze, Improve, Control) process. Measurement of errors started from the time the CT order was verified by the PT to the time of CT administration by the nurse. Data collection included retrospective error tracking software, system audits, and staff surveys. Root causes of CTMRs included inadequate knowledge of CT mixing protocol, inconsistencies in checking methods, and frequent changes in staffing of clinics. Initial CTMRs (n = 33,259) constituted 0.050%, with 77% of these errors affecting patients. The action plan included checklists, education, and competency testing. The postimplementation error rate (n = 33,376, annualized) over a 3-month period was reduced to 0.019%, with only 15% of errors affecting patients. Initial Sigma was calculated at 4.2; this process resulted in the improvement of Sigma to 5.2, representing a 100-fold reduction. Financial analysis demonstrated a reduction in annualized loss of revenue (administration charges and drug wastage) from $11,537.95 (Medicare Average Sales Price) before the start of the project to $1,262.40. The Six Sigma process is a powerful technique in the reduction of CTMRs.

The water footprint of biofuel produced from forest wood residue via a mixed alcohol gasification process

NASA Astrophysics Data System (ADS)

Chiu, Yi-Wen; Wu, May

2013-09-01

Forest residue has been proposed as a feasible candidate for cellulosic biofuels. However, the number of studies assessing its water use remains limited. This work aims to analyze the impacts of forest-based biofuel on water resources and quality by using a water footprint approach. A method established here is tailored to the production system, which includes softwood, hardwood, and short-rotation woody crops. The method is then applied to selected areas in the southeastern region of the United States to quantify the county-level water footprint of the biofuel produced via a mixed alcohol gasification process, under several logistic systems, and at various refinery scales. The results indicate that the blue water sourced from surface or groundwater is minimal, at 2.4 liters per liter of biofuel (l/l). The regional-average green water (rainfall) footprint falls between 400 and 443 l/l. The biofuel pathway appears to have a low nitrogen grey water footprint averaging 25 l/l at the regional level, indicating minimal impacts on water quality. Feedstock mix plays a key role in determining the magnitude and the spatial distribution of the water footprint in these regions. Compared with other potential feedstock, forest wood residue shows promise with its low blue and grey water footprint.

Method for acid oxidation of radioactive, hazardous, and mixed organic waste materials

DOEpatents

Pierce, Robert A.; Smith, James R.; Ramsey, William G.; Cicero-Herman, Connie A.; Bickford, Dennis F.

1999-01-01

The present invention is directed to a process for reducing the volume of low level radioactive and mixed waste to enable the waste to be more economically stored in a suitable repository, and for placing the waste into a form suitable for permanent disposal. The invention involves a process for preparing radioactive, hazardous, or mixed waste for storage by contacting the waste starting material containing at least one organic carbon-containing compound and at least one radioactive or hazardous waste component with nitric acid and phosphoric acid simultaneously at a contacting temperature in the range of about 140.degree. C. to about 210 .degree. C. for a period of time sufficient to oxidize at least a portion of the organic carbon-containing compound to gaseous products, thereby producing a residual concentrated waste product containing substantially all of said radioactive or inorganic hazardous waste component; and immobilizing the residual concentrated waste product in a solid phosphate-based ceramic or glass form.

A case study of microphysical structures and hydrometeor phase in convection using radar Doppler spectra at Darwin, Australia

DOE PAGES

Riihimaki, Laura D.; Comstock, J. M.; Luke, E.; ...

2017-07-12

To understand the microphysical processes that impact diabatic heating and cloud lifetimes in convection, we need to characterize the spatial distribution of supercooled liquid water. To address this observational challenge, ground-based vertically pointing active sensors at the Darwin Atmospheric Radiation Measurement site are used to classify cloud phase within a deep convective cloud. The cloud cannot be fully observed by a lidar due to signal attenuation. Therefore, we developed an objective method for identifying hydrometeor classes, including mixed-phase conditions, using k-means clustering on parameters that describe the shape of the Doppler spectra from vertically pointing Ka-band cloud radar. Furthermore, thismore » approach shows that multiple, overlapping mixed-phase layers exist within the cloud, rather than a single region of supercooled liquid. Diffusional growth calculations show that the conditions for the Wegener-Bergeron-Findeisen process exist within one of these mixed-phase microstructures.« less

A case study of microphysical structures and hydrometeor phase in convection using radar Doppler spectra at Darwin, Australia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Riihimaki, Laura D.; Comstock, J. M.; Luke, E.

To understand the microphysical processes that impact diabatic heating and cloud lifetimes in convection, we need to characterize the spatial distribution of supercooled liquid water. To address this observational challenge, ground-based vertically pointing active sensors at the Darwin Atmospheric Radiation Measurement site are used to classify cloud phase within a deep convective cloud. The cloud cannot be fully observed by a lidar due to signal attenuation. Therefore, we developed an objective method for identifying hydrometeor classes, including mixed-phase conditions, using k-means clustering on parameters that describe the shape of the Doppler spectra from vertically pointing Ka-band cloud radar. Furthermore, thismore » approach shows that multiple, overlapping mixed-phase layers exist within the cloud, rather than a single region of supercooled liquid. Diffusional growth calculations show that the conditions for the Wegener-Bergeron-Findeisen process exist within one of these mixed-phase microstructures.« less

Mixing it but not mixed-up: mixed methods research in medical education (a critical narrative review).

PubMed

Maudsley, Gillian

2011-01-01

Some important research questions in medical education and health services research need 'mixed methods research' (particularly synthesizing quantitative and qualitative findings). The approach is not new, but should be more explicitly reported. The broad search question here, of a disjointed literature, was thus: What is mixed methods research - how should it relate to medical education research?, focused on explicit acknowledgement of 'mixing'. Literature searching focused on Web of Knowledge supplemented by other databases across disciplines. Five main messages emerged: - Thinking quantitative and qualitative, not quantitative versus qualitative - Appreciating that mixed methods research blends different knowledge claims, enquiry strategies, and methods - Using a 'horses for courses' [whatever works] approach to the question, and clarifying the mix - Appreciating how medical education research competes with the 'evidence-based' movement, health services research, and the 'RCT' - Being more explicit about the role of mixed methods in medical education research, and the required expertise Mixed methods research is valuable, yet the literature relevant to medical education is fragmented and poorly indexed. The required time, effort, expertise, and techniques deserve better recognition. More write-ups should explicitly discuss the 'mixing' (particularly of findings), rather than report separate components.

Investigations of cloud microphysical response to mixing using digital holography

NASA Astrophysics Data System (ADS)

Beals, Matthew Jacob

Cloud edge mixing plays an important role in the life cycle and development of clouds. Entrainment of subsaturated air affects the cloud at the microscale, altering the number density and size distribution of its droplets. The resulting effect is determined by two timescales: the time required for the mixing event to complete, and the time required for the droplets to adjust to their new environment. If mixing is rapid, evaporation of droplets is uniform and said to be homogeneous in nature. In contrast, slow mixing (compared to the adjustment timescale) results in the droplets adjusting to the transient state of the mixture, producing an inhomogeneous result. Studying this process in real clouds involves the use of airborne optical instruments capable of measuring clouds at the 'single particle' level. Single particle resolution allows for direct measurement of the droplet size distribution. This is in contrast to other 'bulk' methods (i.e. hot-wire probes, lidar, radar) which measure a higher order moment of the distribution and require assumptions about the distribution shape to compute a size distribution. The sampling strategy of current optical instruments requires them to integrate over a path tens to hundreds of meters to form a single size distribution. This is much larger than typical mixing scales (which can extend down to the order of centimeters), resulting in difficulties resolving mixing signatures. The Holodec is an optical particle instrument that uses digital holography to record discrete, local volumes of droplets. This method allows for statistically significant size distributions to be calculated for centimeter scale volumes, allowing for full resolution at the scales important to the mixing process. The hologram also records the three dimensional position of all particles within the volume, allowing for the spatial structure of the cloud volume to be studied. Both of these features represent a new and unique view into the mixing problem. In this dissertation, holographic data recorded during two different field projects is analyzed to study the mixing structure of cumulus clouds. Using Holodec data, it is shown that mixing at cloud top can produce regions of clear but humid air that can subside down along the edge of the cloud as a narrow shell, or advect down shear as a 'humid halo'. This air is then entrained into the cloud at lower levels, producing mixing that appears to be very inhomogeneous. This inhomogeneous-like mixing is shown to be well correlated with regions containing elevated concentrations of large droplets. This is used to argue in favor of the hypothesis that dilution can lead to enhanced droplet growth rates. I also make observations on the microscale spatial structure of observed cloud volumes recorded by the Holodec.

Rapid and Efficient Filtration-Based Procedure for Separation and Safe Analysis of CBRN Mixed Samples

PubMed Central

Bentahir, Mostafa; Laduron, Frederic; Irenge, Leonid; Ambroise, Jérôme; Gala, Jean-Luc

2014-01-01

Separating CBRN mixed samples that contain both chemical and biological warfare agents (CB mixed sample) in liquid and solid matrices remains a very challenging issue. Parameters were set up to assess the performance of a simple filtration-based method first optimized on separate C- and B-agents, and then assessed on a model of CB mixed sample. In this model, MS2 bacteriophage, Autographa californica nuclear polyhedrosis baculovirus (AcNPV), Bacillus atrophaeus and Bacillus subtilis spores were used as biological agent simulants whereas ethyl methylphosphonic acid (EMPA) and pinacolyl methylphophonic acid (PMPA) were used as VX and soman (GD) nerve agent surrogates, respectively. Nanoseparation centrifugal devices with various pore size cut-off (30 kD up to 0.45 µm) and three RNA extraction methods (Invisorb, EZ1 and Nuclisens) were compared. RNA (MS2) and DNA (AcNPV) quantification was carried out by means of specific and sensitive quantitative real-time PCRs (qPCR). Liquid chromatography coupled to time-of-flight mass spectrometry (LC/TOFMS) methods was used for quantifying EMPA and PMPA. Culture methods and qPCR demonstrated that membranes with a 30 kD cut-off retain more than 99.99% of biological agents (MS2, AcNPV, Bacillus Atrophaeus and Bacillus subtilis spores) tested separately. A rapid and reliable separation of CB mixed sample models (MS2/PEG-400 and MS2/EMPA/PMPA) contained in simple liquid or complex matrices such as sand and soil was also successfully achieved on a 30 kD filter with more than 99.99% retention of MS2 on the filter membrane, and up to 99% of PEG-400, EMPA and PMPA recovery in the filtrate. The whole separation process turnaround-time (TAT) was less than 10 minutes. The filtration method appears to be rapid, versatile and extremely efficient. The separation method developed in this work constitutes therefore a useful model for further evaluating and comparing additional separation alternative procedures for a safe handling and preparation of CB mixed samples. PMID:24505375

METHOD OF PURIFYING RADIOACTIVE WATER

DOE Office of Scientific and Technical Information (OSTI.GOV)

Acfi, D.; Schmitt, M.; Neveu, M.

The utilization of lithothamnium calcareum as an ion exchanger for the decontamination of radioactive water is described. In order to retain cobalt and strontium the ion exchanger is mixed with calcium silicate or borate; alternatively sodium phosphate is added to the water prior to the purification process. (NPO)

Students' Reflections on Mathematics Homework Feedback

ERIC Educational Resources Information Center

Landers, Mara; Reinholz, Daniel

2015-01-01

Homework is considered an important aspect of learning mathematics, but little research has considered how students utilize feedback as part of the homework process. This mixed methods, quasi-experimental study examines how community college students in a developmental intermediate algebra course participated in a feedback reflection activity…

CFD Modeling of a Laser-Induced Ethane Pyrolysis in a Wall-less Reactor

NASA Astrophysics Data System (ADS)

Stadnichenko, Olga; Snytnikov, Valeriy; Yang, Junfeng; Matar, Omar

2014-11-01

Ethylene, as the most important feedstock, is widely used in chemical industry to produce various rubbers, plastics and synthetics. A recent study found the IR-laser irradiation induced ethane pyrolysis yields 25% higher ethylene production rates compared to the conventional steam cracking method. Laser induced pyrolysis is initiated by the generation of radicals upon heating of the ethane, then, followed by ethane/ethylene autocatalytic reaction in which ethane is converted into ethylene and other light hydrocarbons. This procedure is governed by micro-mixing of reactants and the feedstock residence time in reactor. Under mild turbulent conditions, the turbulence enhances the micro-mixing process and allows a high yield of ethylene. On the other hand, the high flow rate only allows a short residence time in the reactor which causes incomplete pyrolysis. This work attempts to investigate the interaction between turbulence and ethane pyrolysis process using large eddy simulation method. The modelling results could be applied to optimize the reactor design and operating conditions. Skolkovo Foundation through the UNIHEAT Project.

Investigation of Damage with Cluster Ion Beam Irradiation Using HR-RBS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Seki, Toshio; Aoki, Takaaki; Matsuo, Jiro

2008-11-03

Cluster ion beam can process targets with shallow damage because of the very low irradiation energy per atom. However, it is needed to investigate the damage with cluster ion beam irradiation, because recent applications demand process targets with ultra low damage. The shallow damage can be investigated from depth profiles of specific species before and after ion irradiation. They can be measured with secondary ion mass spectrometry (SIMS) and Rutherford backscattering spectroscopy (RBS). High resolution Rutherford backscattering spectroscopy (HR-RBS) is a non destructive measurement method and depth profiles can be measured with nano-resolution. The cluster ion beam mixing of thinmore » Ni layer in carbon targets can be investigated with HR-RBS. The mixing depth with cluster ion irradiation at 10 keV was about 10 nm. The mixing depth with cluster ion irradiation at 1 keV and 5 keV were less than 1 nm and 5 nm, respectively. The number of displaced Ni atoms with cluster ion irradiation was very larger than that with monomer ion irradiation of same energy. This result shows that violent mixing occurs with single cluster impact.« less

Drug Use Normalization: A Systematic and Critical Mixed-Methods Review.

PubMed

Sznitman, Sharon R; Taubman, Danielle S

2016-09-01

Drug use normalization, which is a process whereby drug use becomes less stigmatized and more accepted as normative behavior, provides a conceptual framework for understanding contemporary drug issues and changes in drug use trends. Through a mixed-methods systematic review of the normalization literature, this article seeks to (a) critically examine how the normalization framework has been applied in empirical research and (b) make recommendations for future research in this area. Twenty quantitative, 26 qualitative, and 4 mixed-methods studies were identified through five electronic databases and reference lists of published studies. Studies were assessed for relevance, study characteristics, quality, and aspects of normalization examined. None of the studies applied the most rigorous research design (experiments) or examined all of the originally proposed normalization dimensions. The most commonly assessed dimension of drug use normalization was "experimentation." In addition to the original dimensions, the review identified the following new normalization dimensions in the literature: (a) breakdown of demographic boundaries and other risk factors in relation to drug use; (b) de-normalization; (c) drug use as a means to achieve normal goals; and (d) two broad forms of micro-politics associated with managing the stigma of illicit drug use: assimilative and transformational normalization. Further development in normalization theory and methodology promises to provide researchers with a novel framework for improving our understanding of drug use in contemporary society. Specifically, quasi-experimental designs that are currently being made feasible by swift changes in cannabis policy provide researchers with new and improved opportunities to examine normalization processes.

Developing Evidence for Public Health Policy and Practice: The Implementation of a Knowledge Translation Approach in a Staged, Multi-Methods Study in England, 2007-09

ERIC Educational Resources Information Center

South, Jane; Cattan, Mima

2014-01-01

Effective knowledge translation processes are critical for the development of evidence-based public health policy and practice. This paper reports on the design and implementation of an innovative approach to knowledge translation within a mixed methods study on lay involvement in public health programme delivery. The study design drew on…

Method for conversion of carbohydrate polymers to value-added chemical products

DOEpatents

Zhang, Zongchao C [Norwood, NJ; Brown, Heather M [Kennewick, WA; Su, Yu [Richland, WA

2012-02-07

Methods are described for conversion of carbohydrate polymers in ionic liquids, including cellulose, that yield value-added chemicals including, e.g., glucose and 5-hydroxylmethylfurfural (HMF) at temperatures below 120.degree. C. Catalyst compositions that include various mixed metal halides are described that are selective for specified products with yields, e.g., of up to about 56% in a single step process.

Iron on mixed zirconia-titania substrate Fischer-Tropsch catalyst and method of making same

DOEpatents

Dyer, Paul N.; Nordquist, Andrew F.; Pierantozzi, Ronald

1986-01-01

A Fischer-Tropsch catalyst comprising iron co-deposited with or deposited on particles comprising a mixture of zirconia and titania, preferably formed by co-precipitation of compounds convertible to zirconia and titania, such as zirconium and titanium alkoxide. The invention also comprises the method of making this catalyst and an improved Fischer-Tropsch reaction process in which the catalyst is utilized.

Chemotherapy treatment decision-making experiences of older adults with cancer, their family members, oncologists and family physicians: a mixed methods study.

PubMed

Puts, Martine T E; Sattar, Schroder; McWatters, Kara; Lee, Katherine; Kulik, Michael; MacDonald, Mary-Ellen; Jang, Raymond; Amir, Eitan; Krzyzanowska, Monika K; Leighl, Natasha; Fitch, Margaret; Joshua, Anthony M; Warde, Padraig; Tourangeau, Ann E; Alibhai, Shabbir M H

2017-03-01

Although comorbidities, frailty, and functional impairment are common in older adults (OA) with cancer, little is known about how these factors are considered during the treatment decision-making process by OAs, their families, and health care providers. Our aim was to better understand the treatment decision process from all these perspectives. A mixed methods multi-perspective longitudinal study using semi-structured interviews and surveys with 29 OAs aged ≥70 years with advanced prostate, breast, colorectal, or lung cancer, 24 of their family members,13 oncologists, and 15 family physicians was conducted. The sample was stratified on age (70-79 and 80+). All interviews were analyzed using thematic analysis. There was no difference in the treatment decision-making experience based on age. Most OAs felt that they should have the final say in the treatment decision, but strongly valued their oncologists' opinion. "Trust in my oncologist" and "chemotherapy as the last resort to prolong life" were the most important reasons to accept treatment. Families indicated a need to improve communication between them, the patient and the specialist, particularly around goals of treatment. Comorbidity and potential side-effects did not play a major role in the treatment decision-making for patients, families, or oncologists. Family physicians reported no involvement in decisions but desired to be more involved. This first study using multiple perspectives showed neither frailty nor comorbidity played a role in the treatment decision-making process. Efforts to improve communication were identified as an opportunity that may enhance quality of care. In a mixed methods study multiple perspective study with older adults with cancer, their family members, their oncologist and their family physician we explored the treatment decision making process and found that most older adults were satisfied with their decision. Comorbidity, functional status and frailty did not impact the older adult's or their family members' decision.

Pragmatism, Evidence, and Mixed Methods Evaluation

ERIC Educational Resources Information Center

Hall, Jori N.

2013-01-01

Mixed methods evaluation has a long-standing history of enhancing the credibility of evaluation findings. However, using mixed methods in a utilitarian way implicitly emphasizes convenience over engaging with its philosophical underpinnings (Denscombe, 2008). Because of this, some mixed methods evaluators and social science researchers have been…

Structural issues affecting mixed methods studies in health research: a qualitative study.

PubMed

O'Cathain, Alicia; Nicholl, Jon; Murphy, Elizabeth

2009-12-09

Health researchers undertake studies which combine qualitative and quantitative methods. Little attention has been paid to the structural issues affecting this mixed methods approach. We explored the facilitators and barriers to undertaking mixed methods studies in health research. Face-to-face semi-structured interviews with 20 researchers experienced in mixed methods research in health in the United Kingdom. Structural facilitators for undertaking mixed methods studies included a perception that funding bodies promoted this approach, and the multidisciplinary constituency of some university departments. Structural barriers to exploiting the potential of these studies included a lack of education and training in mixed methods research, and a lack of templates for reporting mixed methods articles in peer-reviewed journals. The 'hierarchy of evidence' relating to effectiveness studies in health care research, with the randomised controlled trial as the gold standard, appeared to pervade the health research infrastructure. Thus integration of data and findings from qualitative and quantitative components of mixed methods studies, and dissemination of integrated outputs, tended to occur through serendipity and effort, further highlighting the presence of structural constraints. Researchers are agents who may also support current structures - journal reviewers and editors, and directors of postgraduate training courses - and thus have the ability to improve the structural support for exploiting the potential of mixed methods research. The environment for health research in the UK appears to be conducive to mixed methods research but not to exploiting the potential of this approach. Structural change, as well as change in researcher behaviour, will be necessary if researchers are to fully exploit the potential of using mixed methods research.

A multiplex PCR method for the identification of commercially important salmon and trout species (Oncorhynchus and Salmo) in North America.

PubMed

Rasmussen Hellberg, Rosalee S; Morrissey, Michael T; Hanner, Robert H

2010-09-01

The purpose of this study was to develop a species-specific multiplex polymerase chain reaction (PCR) method that allows for the detection of salmon species substitution on the commercial market. Species-specific primers and TaqMan® probes were developed based on a comprehensive collection of mitochondrial 5' cytochrome c oxidase subunit I (COI) deoxyribonucleic acid (DNA) "barcode" sequences. Primers and probes were combined into multiplex assays and tested for specificity against 112 reference samples representing 25 species. Sensitivity and linearity tests were conducted using 10-fold serial dilutions of target DNA (single-species samples) and DNA admixtures containing the target species at levels of 10%, 1.0%, and 0.1% mixed with a secondary species. The specificity tests showed positive signals for the target DNA in both real-time and conventional PCR systems. Nonspecific amplification in both systems was minimal; however, false positives were detected at low levels (1.2% to 8.3%) in conventional PCR. Detection levels were similar for admixtures and single-species samples based on a 30 PCR cycle cut-off, with limits of 0.25 to 2.5 ng (1% to 10%) in conventional PCR and 0.05 to 5.0 ng (0.1% to 10%) in real-time PCR. A small-scale test with food samples showed promising results, with species identification possible even in heavily processed food items. Overall, this study presents a rapid, specific, and sensitive method for salmon species identification that can be applied to mixed-species and heavily processed samples in either conventional or real-time PCR formats. This study provides a newly developed method for salmon and trout species identification that will assist both industry and regulatory agencies in the detection and prevention of species substitution. This multiplex PCR method allows for rapid, high-throughput species identification even in heavily processed and mixed-species samples. An inter-laboratory study is currently being carried out to assess the ability of this method to identify species in a variety of commercial salmon and trout products.

Mechanisms Controlling the Interannual Variation of Mixed Layer Temperature Averaged over the Nino-3 Region

NASA Technical Reports Server (NTRS)

Kim, Seung-Bum; Lee, Tong; Fukumori, Ichiro

2007-01-01

The present study examines processes governing the interannual variation of MLT in the eastern equatorial Pacific.Processes controlling the interannual variation of mixed layer temperature (MLT) averaged over the Nino-3 domain (5 deg N-5 deg S, 150 deg-90 deg W) are studied using an ocean data assimilation product that covers the period of 1993-2003. The overall balance is such that surface heat flux opposes the MLT change but horizontal advection and subsurface processes assist the change. Advective tendencies are estimated here as the temperature fluxes through the domain's boundaries, with the boundary temperature referenced to the domain-averaged temperature to remove the dependence on temperature scale. This allows the authors to characterize external advective processes that warm or cool the water within the domain as a whole. The zonal advective tendency is caused primarily by large-scale advection of warm-pool water through the western boundary of the domain. The meridional advective tendency is contributed to mostly by Ekman current advecting large-scale temperature anomalies through the southern boundary of the domain. Unlike many previous studies, the subsurface processes that consist of vertical mixing and entrainment are explicitly evaluated. In particular, a rigorous method to estimate entrainment allows an exact budget closure. The vertical mixing across the mixed layer (ML) base has a contribution in phase with the MLT change. The entrainment tendency due to the temporal change in ML depth is negligible compared to other subsurface processes. The entrainment tendency by vertical advection across the ML base is dominated by large-scale changes in upwelling and the temperature of upwelling water. Tropical instability waves (TIWs) result in smaller-scale vertical advection that warms the domain during La Nina cooling events. However, such a warming tendency is overwhelmed by the cooling tendency associated with the large-scale upwelling by a factor of 2. In summary, all the balance terms are important in the MLT budget except the entrainment due to lateral induction and temporal variation in ML depth. All three advective tendencies are primarily caused by large-scale and low-frequency processes, and they assist the Nino-3 MLT change.

Methods of equipment choice in shotcreting

NASA Astrophysics Data System (ADS)

Sharapov, R. R.; Yadykina, V. V.; Stepanov, M. A.; Kitukov, B. A.

2018-03-01

Shotcrete is widely used in architecture, hydraulic engineering structures, finishing works in tunnels, arc covers and ceilings. The problem of the equipment choice in shotcreting is very important. The main issues influencing the equipment choice are quality improvement and intensification of shotcreting. Main parameters and rational limits of technological characteristic of machines used in solving different problems in shotcreting are described. It is suggested to take into account peculiarities of shotcrete mixing processes and peculiarities of applying these mixtures with compressed air kinetic energy. The described method suggests choosing a mixer with the account of energy capacity, Reynolds number and rotational frequency of the mixing drum. The suggested choice procedure of the equipment nomenclature allows decreasing exploitation costs, increasing the quality of shotcrete and shotcreting in general.

Mixed convection flow of viscoelastic fluid by a stretching cylinder with heat transfer.

PubMed

Hayat, Tasawar; Anwar, Muhammad Shoaib; Farooq, Muhammad; Alsaedi, Ahmad

2015-01-01

Flow of viscoelastic fluid due to an impermeable stretching cylinder is discussed. Effects of mixed convection and variable thermal conductivity are present. Thermal conductivity is taken temperature dependent. Nonlinear partial differential system is reduced into the nonlinear ordinary differential system. Resulting nonlinear system is computed for the convergent series solutions. Numerical values of skin friction coefficient and Nusselt number are computed and discussed. The results obtained with the current method are in agreement with previous studies using other methods as well as theoretical ideas. Physical interpretation reflecting the contribution of influential parameters in the present flow is presented. It is hoped that present study serves as a stimulus for modeling further stretching flows especially in polymeric and paper production processes.

The Effects of Behavioral Health Reform on Safety-Net Institutions: A Mixed-Method Assessment in a Rural State

PubMed Central

Sommerfeld, David H.; Aarons, Gregory A.; Waitzkin, Howard

2013-01-01

In July 2005, New Mexico initiated a major reform of publicly-funded behavioral healthcare to reduce cost and bureaucracy. We used a mixed-method approach to examine how this reform impacted the workplaces and employees of service agencies that care for low-income adults in rural and urban areas. Information technology problems and cumbersome processes to enroll patients, procure authorizations, and submit claims led to payment delays that affected the financial status of the agencies, their ability to deliver care, and employee morale. Rural employees experienced lower levels of job satisfaction and organizational commitment and higher levels of turnover intentions under the reform when compared to their urban counterparts. PMID:23307162

Mixed Convection Flow of Viscoelastic Fluid by a Stretching Cylinder with Heat Transfer

PubMed Central

Hayat, Tasawar; Anwar, Muhammad Shoaib; Farooq, Muhammad; Alsaedi, Ahmad

2015-01-01

Flow of viscoelastic fluid due to an impermeable stretching cylinder is discussed. Effects of mixed convection and variable thermal conductivity are present. Thermal conductivity is taken temperature dependent. Nonlinear partial differential system is reduced into the nonlinear ordinary differential system. Resulting nonlinear system is computed for the convergent series solutions. Numerical values of skin friction coefficient and Nusselt number are computed and discussed. The results obtained with the current method are in agreement with previous studies using other methods as well as theoretical ideas. Physical interpretation reflecting the contribution of influential parameters in the present flow is presented. It is hoped that present study serves as a stimulus for modeling further stretching flows especially in polymeric and paper production processes. PMID:25775032

Using mixed methods effectively in prevention science: designs, procedures, and examples.

PubMed

Zhang, Wanqing; Watanabe-Galloway, Shinobu

2014-10-01

There is growing interest in using a combination of quantitative and qualitative methods to generate evidence about the effectiveness of health prevention, services, and intervention programs. With the emerging importance of mixed methods research across the social and health sciences, there has been an increased recognition of the value of using mixed methods for addressing research questions in different disciplines. We illustrate the mixed methods approach in prevention research, showing design procedures used in several published research articles. In this paper, we focused on two commonly used mixed methods designs: concurrent and sequential mixed methods designs. We discuss the types of mixed methods designs, the reasons for, and advantages of using a particular type of design, and the procedures of qualitative and quantitative data collection and integration. The studies reviewed in this paper show that the essence of qualitative research is to explore complex dynamic phenomena in prevention science, and the advantage of using mixed methods is that quantitative data can yield generalizable results and qualitative data can provide extensive insights. However, the emphasis of methodological rigor in a mixed methods application also requires considerable expertise in both qualitative and quantitative methods. Besides the necessary skills and effective interdisciplinary collaboration, this combined approach also requires an open-mindedness and reflection from the involved researchers.

Hydrothermal synthesis and enhanced photocatalytic activity of mixed-phase TiO2 powders with controllable anatase/rutile ratio

NASA Astrophysics Data System (ADS)

Wang, Qi; Qiao, Zhi; Jiang, Peng; Kuang, Jianlei; Liu, Wenxiu; Cao, Wenbin

2018-03-01

In this study, mixed-phase TiO2 powders were novelly synthesized via a facile and mild hydrothermal method without any post-heat treatment. TiOSO4 and peroxide titanic acid (PTA) were used as inorganic titanium sources, while no special solvent or additive were introduced. The XRD and TEM results showed the mixed-phase TiO2 powders were composed of anatase and rutile phases, and the PTA sol played an important role on forming the rutile nucleus. The proportion of rutile in the mixed-phase TiO2 could be easily controlled in the range of 0%-70.5% by changing the amount of PTA sol used in the synthesis process. The UV-Visible absorption spectra indicated the prepared mixed-phase TiO2 showed enhanced visible light absorption with the increase of rutile ratio. The photodegradation experiments revealed the mixed-phase TiO2 exhibited the best photocatalytic activity at the rutile ratio of 41.5%, while a higher or lower rutile ratio both resulted in the decrease of photocatalytic activity.

Effect on Non-Newtonian Rheology on Mixing in Taylor-Couette Flow

NASA Astrophysics Data System (ADS)

Cagney, Neil; Balabani, Stavroula

2017-11-01

Mixing processes within many industry applications are strongly affected by the rheology of the working fluid. This is particularly relevant for pharmaceutical, food and waste treatment industries, where the working fluids are often strongly non-Newtonian, and significant variations in rheology between batches may occur. We approach the question of how rheology affects mixing by focussing on a the classical case of Taylor-Couette flow, which exhibits a number of instabilities and flow regimes as a function of Reynolds number. We examine Taylor-Couette flow generated for a range of aqueous solutions of xantham gum or corn starch, such that the rheology varies from shear-thinning to shear-thickening. For each case, we measure the power consumption using a torque meter and the flow field using high speed, time-resolved Particle-Image Velocimetry. The mixing characteristics are quantified using a number of Lagrangian and Eulerian approaches, including the coarse grained density method and vortex strength. By comparing these metrics to the power number, we discuss how the mixing efficiency (ratio of mixing effectiveness to power input) varies with the flow index of the fluid.

The use of "mixing" procedure of mixed methods in health services research.

PubMed

Zhang, Wanqing; Creswell, John

2013-08-01

Mixed methods research has emerged alongside qualitative and quantitative approaches as an important tool for health services researchers. Despite growing interest, among health services researchers, in using mixed methods designs, little has been done to identify the procedural aspects of doing so. To describe how mixed methods researchers mix the qualitative and quantitative aspects of their studies in health services research. We searched the PubMed for articles, using mixed methods in health services research, published between January 1, 2006 and December 30, 2010. We identified and reviewed 30 published health services research articles on studies in which mixed methods had been used. We selected 3 articles as illustrations to help health services researcher conceptualize the type of mixing procedures that they were using. Three main "mixing" procedures have been applied within these studies: (1) the researchers analyzed the 2 types of data at the same time but separately and integrated the results during interpretation; (2) the researchers connected the qualitative and quantitative portions in phases in such a way that 1 approach was built upon the findings of the other approach; and (3) the researchers mixed the 2 data types by embedding the analysis of 1 data type within the other. "Mixing" in mixed methods is more than just the combination of 2 independent components of the quantitative and qualitative data. The use of "mixing" procedure in health services research involves the integration, connection, and embedding of these 2 data components.

Attenuated Total Reflection Fourier Transform Infrared (ATR FT-IR) Spectroscopy as an Analytical Method to Investigate the Secondary Structure of a Model Protein Embedded in Solid Lipid Matrices.

PubMed

Zeeshan, Farrukh; Tabbassum, Misbah; Jorgensen, Lene; Medlicott, Natalie J

2018-02-01

Protein drugs may encounter conformational perturbations during the formulation processing of lipid-based solid dosage forms. In aqueous protein solutions, attenuated total reflection Fourier transform infrared (ATR FT-IR) spectroscopy can investigate these conformational changes following the subtraction of spectral interference of solvent with protein amide I bands. However, in solid dosage forms, the possible spectral contribution of lipid carriers to protein amide I band may be an obstacle to determine conformational alterations. The objective of this study was to develop an ATR FT-IR spectroscopic method for the analysis of protein secondary structure embedded in solid lipid matrices. Bovine serum albumin (BSA) was chosen as a model protein, while Precirol AT05 (glycerol palmitostearate, melting point 58 ℃) was employed as the model lipid matrix. Bovine serum albumin was incorporated into lipid using physical mixing, melting and mixing, or wet granulation mixing methods. Attenuated total reflection FT-IR spectroscopy and size exclusion chromatography (SEC) were performed for the analysis of BSA secondary structure and its dissolution in aqueous media, respectively. The results showed significant interference of Precirol ATO5 with BSA amide I band which was subtracted up to 90% w/w lipid content to analyze BSA secondary structure. In addition, ATR FT-IR spectroscopy also detected thermally denatured BSA solid alone and in the presence of lipid matrix indicating its suitability for the detection of denatured protein solids in lipid matrices. Despite being in the solid state, conformational changes occurred to BSA upon incorporation into solid lipid matrices. However, the extent of these conformational alterations was found to be dependent on the mixing method employed as indicated by area overlap calculations. For instance, the melting and mixing method imparted negligible effect on BSA secondary structure, whereas the wet granulation mixing method promoted more changes. Size exclusion chromatography analysis depicted the complete dissolution of BSA in the aqueous media employed in the wet granulation method. In conclusion, an ATR FT-IR spectroscopic method was successfully developed to investigate BSA secondary structure in solid lipid matrices following the subtraction of lipid spectral interference. The ATR FT-IR spectroscopy could further be applied to investigate the secondary structure perturbations of therapeutic proteins during their formulation development.

A school-based interdisciplinary approach to promote health and academic achievement among children in a deprived neighborhood: study protocol for a mixed-methods evaluation.

PubMed

Abrahamse, Mariëlle E; Jonkman, Caroline S; Harting, Janneke

2018-04-10

The large number of children that grow up in poverty is concerning, especially given the negative developmental outcomes that can persist into adulthood. Poverty has been found as a risk factor to negatively affect academic achievement and health outcomes in children. Interdisciplinary interventions can be an effective way to promote health and academic achievement. The present study aims to evaluate a school-based interdisciplinary approach on child health, poverty, and academic achievement using a mixed-method design. Generally taken, outcomes of this study increase the knowledge about effective ways to give disadvantaged children equal chances early in their lives. An observational study with a mixed-methods design including both quantitative and qualitative data collection methods will be used to evaluate the interdisciplinary approach. The overall research project exists of three study parts including a longitudinal study, a cross-sectional study, and a process evaluation. Using a multi-source approach we will assess child health as the primary outcome. Child poverty and child academic achievement will be assessed as secondary outcomes. The process evaluation will observe the program's effects on the school environment and the program's implementation in order to obtain more knowledge on how to disseminate the interdisciplinary approach to other schools and neighborhoods. The implementation of a school-based interdisciplinary approach via primary schools combining the cross-sectoral domains health, poverty, and academic achievement is innovative and a step forward to reach an ethnic minority population. However, the large variety of the interventions and activities within the approach can limit the validity of the study. Including a process evaluation will therefore help to improve the interpretation of our findings. In order to contribute to policy and practice focusing on decreasing the unequal chances of children growing up in deprived neighborhoods, it is important to study whether the intervention leads to positive developmental outcomes in children. ( NTR 6571 ) (retrospectively registered on August 4, 2017).

Validity of contents of a paediatric critical comfort scale using mixed methodology.

PubMed

Bosch-Alcaraz, A; Jordan-Garcia, I; Alcolea-Monge, S; Fernández-Lorenzo, R; Carrasquer-Feixa, E; Ferrer-Orona, M; Falcó-Pegueroles, A

Critical illness in paediatric patients includes acute conditions in a healthy child as well as exacerbations of chronic disease, and therefore these situations must be clinically managed in Critical Care Units. The role of the paediatric nurse is to ensure the comfort of these critically ill patients. To that end, instruments are required that correctly assess critical comfort. To describe the process for validating the content of a paediatric critical comfort scale using mixed-method research. Initially, a cross-cultural adaptation of the Comfort Behavior Scale from English to Spanish using the translation and back-translation method was made. After that, its content was evaluated using mixed method research. This second step was divided into a quantitative stage in which an ad hoc questionnaire was used in order to assess each scale's item relevance and wording and a qualitative stage with two meetings with health professionals, patients and a family member following the Delphi Method recommendations. All scale items obtained a content validity index >0.80, except physical movement in its relevance, which obtained 0.76. Global content scale validity was 0.87 (high). During the qualitative stage, items from each of the scale domains were reformulated or eliminated in order to make the scale more comprehensible and applicable. The use of a mixed-method research methodology during the scale content validity phase allows the design of a richer and more assessment-sensitive instrument. Copyright © 2017 Sociedad Española de Enfermería Intensiva y Unidades Coronarias (SEEIUC). Publicado por Elsevier España, S.L.U. All rights reserved.

Direct simulation of groundwater age

USGS Publications Warehouse

Goode, Daniel J.

1996-01-01

A new method is proposed to simulate groundwater age directly, by use of an advection-dispersion transport equation with a distributed zero-order source of unit (1) strength, corresponding to the rate of aging. The dependent variable in the governing equation is the mean age, a mass-weighted average age. The governing equation is derived from residence-time-distribution concepts for the case of steady flow. For the more general case of transient flow, a transient governing equation for age is derived from mass-conservation principles applied to conceptual “age mass.” The age mass is the product of the water mass and its age, and age mass is assumed to be conserved during mixing. Boundary conditions include zero age mass flux across all noflow and inflow boundaries and no age mass dispersive flux across outflow boundaries. For transient-flow conditions, the initial distribution of age must be known. The solution of the governing transport equation yields the spatial distribution of the mean groundwater age and includes diffusion, dispersion, mixing, and exchange processes that typically are considered only through tracer-specific solute transport simulation. Traditional methods have relied on advective transport to predict point values of groundwater travel time and age. The proposed method retains the simplicity and tracer-independence of advection-only models, but incorporates the effects of dispersion and mixing on volume-averaged age. Example simulations of age in two idealized regional aquifer systems, one homogeneous and the other layered, demonstrate the agreement between the proposed method and traditional particle-tracking approaches and illustrate use of the proposed method to determine the effects of diffusion, dispersion, and mixing on groundwater age.

The Pedestrian Detection Method Using an Extension Background Subtraction about the Driving Safety Support Systems

NASA Astrophysics Data System (ADS)

Muranaka, Noriaki; Date, Kei; Tokumaru, Masataka; Imanishi, Shigeru

In recent years, the traffic accident occurs frequently with explosion of traffic density. Therefore, we think that the safe and comfortable transportation system to defend the pedestrian who is the traffic weak is necessary. First, we detect and recognize the pedestrian (the crossing person) by the image processing. Next, we inform all the drivers of the right or left turn that the pedestrian exists by the sound and the image and so on. By prompting a driver to do safe driving in this way, the accident to the pedestrian can decrease. In this paper, we are using a background subtraction method for the movement detection of the movement object. In the background subtraction method, the update method in the background was important, and as for the conventional way, the threshold values of the subtraction processing and background update were identical. That is, the mixing rate of the input image and the background image of the background update was a fixation value, and the fine tuning which corresponded to the environment change of the weather was difficult. Therefore, we propose the update method of the background image that the estimated mistake is difficult to be amplified. We experiment and examines in the comparison about five cases of sunshine, cloudy, evening, rain, sunlight change, except night. This technique can set separately the threshold values of the subtraction processing and background update processing which suited the environmental condition of the weather and so on. Therefore, the fine tuning becomes possible freely in the mixing rate of the input image and the background image of the background update. Because the setting of the parameter which suited an environmental condition becomes important to minimize mistaking percentage, we examine about the setting of a parameter.

Spontaneous Time Symmetry Breaking in System with Mixed Strategy Nash Equilibrium: Evidences in Experimental Economics Data

NASA Astrophysics Data System (ADS)

Wang, Zhijian; Xu, Bin; Zhejiang Collaboration

2011-03-01

In social science, laboratory experiment with human subjects' interaction is a standard test-bed for studying social processes in micro level. Usually, as in physics, the processes near equilibrium are suggested as stochastic processes with time-reversal symmetry (TRS). To the best of our knowledge, near equilibrium, the breaking time symmetry, as well as the existence of robust time anti-symmetry processes, has not been reported clearly in experimental economics till now. By employing Markov transition method to analysis the data from human subject 2x2 Games with wide parameters and mixed Nash equilibrium, we study the time symmetry of the social interaction process near Nash equilibrium. We find that, the time symmetry is broken, and there exists a robust time anti-symmetry processes. We also report the weight of the time anti-symmetry processes in the total processes of each the games. Evidences in laboratory marketing experiments, at the same time, are provided as one-dimension cases. In these cases, time anti-symmetry cycles can also be captured. The proposition of time anti-symmetry processes is small, but the cycles are distinguishable.

Mixed-layered bismuth--oxygen--iodine materials for capture and waste disposal of radioactive iodine

DOE Office of Scientific and Technical Information (OSTI.GOV)

Krumhansl, James L; Nenoff, Tina M

2015-01-06

Materials and methods of synthesizing mixed-layered bismuth oxy-iodine materials, which can be synthesized in the presence of aqueous radioactive iodine species found in caustic solutions (e.g. NaOH or KOH). This technology provides a one-step process for both iodine sequestration and storage from nuclear fuel cycles. It results in materials that will be durable for repository conditions much like those found in Waste Isolation Pilot Plant (WIPP) and estimated for Yucca Mountain (YMP). By controlled reactant concentrations, optimized compositions of these mixed-layered bismuth oxy-iodine inorganic materials are produced that have both a high iodine weight percentage and a low solubility inmore » groundwater environments.« less

Ultrafast Single-Shot Optical Oscilloscope based on Time-to-Space Conversion due to Temporal and Spatial Walk-Off Effects in Nonlinear Mixing Crystal

NASA Astrophysics Data System (ADS)

Takagi, Yoshihiro; Yamada, Yoshifumi; Ishikawa, Kiyoshi; Shimizu, Seiji; Sakabe, Shuji

2005-09-01

A simple method for single-shot sub-picosecond optical pulse diagnostics has been demonstrated by imaging the time evolution of the optical mixing onto the beam cross section of the sum-frequency wave when the interrogating pulse passes over the tested pulse in the mixing crystal as a result of the combined effect of group-velocity difference and walk-off beam propagation. A high linearity of the time-to-space projection is deduced from the process solely dependent upon the spatial uniformity of the refractive indices. A snap profile of the accidental coincidence between asynchronous pulses from separate mode-locked lasers has been detected, which demonstrates the single-shot ability.

Effect of Agitation in Alkalization Process on the Characteristics of Sodium Carboxymethyl Sago and Cassava Starches

NASA Astrophysics Data System (ADS)

Titi, C. S.; Fachrudin, R.; Ruriani, E.; Yuliasih, I.

2018-05-01

Sodium carboxymethyl starch (Sodium CMS) is a modified starch prepared by two successive processes, alkalization and etherification. Alkalization will change the activated hydroxyl group of starch to more reactive alkoxide (St-O-), and then carboxymethyl group will substitute the hydroxyl group into sodium CMS. This research investigated the effect of agitation (1000 rpm of stirring and 4000 rpm of homogenization) in alkalization process to the modification of native starch into sodium CMS. Cassava and sago starches were mixed with sodium hydroxide (1.8 and 1.9 moles per mole anhydrous glucose units). The combination of NaOH and homogenizing gave the highest degrees of substitution for cassava (DS 0.73) and sago (DS 0.55) starches. The sodium CMS characteristics (paste clarity, water and oil absorption capacities, solubility, swelling power) were a function of mixing method but not on the amount of NaOH used.

Structural issues affecting mixed methods studies in health research: a qualitative study

PubMed Central

2009-01-01

Background Health researchers undertake studies which combine qualitative and quantitative methods. Little attention has been paid to the structural issues affecting this mixed methods approach. We explored the facilitators and barriers to undertaking mixed methods studies in health research. Methods Face-to-face semi-structured interviews with 20 researchers experienced in mixed methods research in health in the United Kingdom. Results Structural facilitators for undertaking mixed methods studies included a perception that funding bodies promoted this approach, and the multidisciplinary constituency of some university departments. Structural barriers to exploiting the potential of these studies included a lack of education and training in mixed methods research, and a lack of templates for reporting mixed methods articles in peer-reviewed journals. The 'hierarchy of evidence' relating to effectiveness studies in health care research, with the randomised controlled trial as the gold standard, appeared to pervade the health research infrastructure. Thus integration of data and findings from qualitative and quantitative components of mixed methods studies, and dissemination of integrated outputs, tended to occur through serendipity and effort, further highlighting the presence of structural constraints. Researchers are agents who may also support current structures - journal reviewers and editors, and directors of postgraduate training courses - and thus have the ability to improve the structural support for exploiting the potential of mixed methods research. Conclusion The environment for health research in the UK appears to be conducive to mixed methods research but not to exploiting the potential of this approach. Structural change, as well as change in researcher behaviour, will be necessary if researchers are to fully exploit the potential of using mixed methods research. PMID:20003210

Characterizing Three-Dimensional Mixing Process in a River Confluence using Hydro-acoustical Backscatter and Flow Measurement

NASA Astrophysics Data System (ADS)

Son, Geunsoo; Kim, Dongsu; Kim, YoungDo; Lyu, Siwan; Kim, Seojun

2017-04-01

River confluences are zones where two rivers with different geomorphic and hydraulic characteristics amalgamate, resulting in rapid change in terms of flow regime, sediment entrainment and hydraulic geometry. In these confluence zones, the flow structure is basically complicated responded with concurrent mixing of physical and chemical aquatic properties, and continuous channel morphology could be changed due to erosion and sedimentation. In addition, the confluences are regions in which two rivers join and play an important role in river ecology. In order to characterize the mixing process of confluence for understanding the impacts of a river on the other river, therefore, it has been crucial to analyze the spatial mixing patterns for main streams depending on various inflow conditions of tributaries. However, most conventional studies have mostly relied upon hydraulic or water quality numerical models for understanding mixing pattern analysis of confluences, due to the difficulties to acquire a wide spatial range of in-situ data especially for characterizing this kind of mixing process. Even with intensive in-situ measurements, those researches tended to focus mainly on the hydraulic characteristics such as the flow and morphological complexity of confluence, so that very few studies comprehensively included sediment variation with flow at the same time. In this study, subsequently, flow and sediment mixing characteristics were concurrently investigated in the confluence between Nakdong and Nam river in South Korea, where it has been frequently questioned to determine how Nam river affects Nakdong river that recently have suffered various environmental problems such as green algae bloom and erosion/deposition in the confluence. We basically examined the mixing characteristics of confluence by using acoustic Doppler current profilers (ADCPs) which were used to measure hydraulic factors such as flow rate and depth, as well as measuring the suspended sediment concentration by using acoustic backscatter. Cross-sectional ADCP measurements in a confluence were collected with high spatial resolution in order to analyze the details of spatial distribution in the perspective of the three-dimensional mixing patterns of flow and sediment, where backscatters (or SNR) measured from ADCPs were used to track sediment mixing assuming that it could be a surrogate to estimate the suspended sediment concentration. Raw backscatter data were corrected by considering the beam spreading and absorption by water. Also, an optical Laser diffraction instrument (LISST) was used to verify the method of acoustic backscatter and to collect the particle size distribution of main stream and tributary. In addition, image-based spatial distributions of sediment mixture in the confluence were monitored in various flow conditions by using an unmanned aerial vehicle (UAV), which were compared with the spatial distribution of acoustic backscatter. As results, we found that when acoustic backscatter and flow measurements by ADCPs were well processed, they could be proper indicators to identify the spatial patterns of the three-dimensional mixing process between two rivers.

EVALUATION OF ARG-1 SAMPLES PREPARED BY CESIUM CARBONATE DISSOLUTION DURING THE ISOLOK SME ACCEPTABILITY TESTING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Edwards, T.; Hera, K.; Coleman, C.

2011-12-05

Evaluation of Defense Waste Processing Facility (DWPF) Chemical Process Cell (CPC) cycle time identified several opportunities to improve the CPC processing time. The Mechanical Systems & Custom Equipment Development (MS&CED) Section of the Savannah River National Laboratory (SRNL) recently completed the evaluation of one of these opportunities - the possibility of using an Isolok sampling valve as an alternative to the Hydragard valve for taking DWPF process samples at the Slurry Mix Evaporator (SME). The use of an Isolok for SME sampling has the potential to improve operability, reduce maintenance time, and decrease CPC cycle time. The SME acceptability testingmore » for the Isolok was requested in Task Technical Request (TTR) HLW-DWPF-TTR-2010-0036 and was conducted as outlined in Task Technical and Quality Assurance Plan (TTQAP) SRNLRP-2011-00145. RW-0333P QA requirements applied to the task, and the results from the investigation were documented in SRNL-STI-2011-00693. Measurement of the chemical composition of study samples was a critical component of the SME acceptability testing of the Isolok. A sampling and analytical plan supported the investigation with the analytical plan directing that the study samples be prepared by a cesium carbonate (Cs{sub 2}CO{sub 3}) fusion dissolution method and analyzed by Inductively Coupled Plasma - Optical Emission Spectroscopy (ICP-OES). The use of the cesium carbonate preparation method for the Isolok testing provided an opportunity for an additional assessment of this dissolution method, which is being investigated as a potential replacement for the two methods (i.e., sodium peroxide fusion and mixed acid dissolution) that have been used at the DWPF for the analysis of SME samples. Earlier testing of the Cs{sub 2}CO{sub 3} method yielded promising results which led to a TTR from Savannah River Remediation, LLC (SRR) to SRNL for additional support and an associated TTQAP to direct the SRNL efforts. A technical report resulting from this work was issued that recommended that the mixed acid method be replaced by the Cs{sub 2}CO{sub 3} method for the measurement of magnesium (Mg), sodium (Na), and zirconium (Zr) with additional testing of the method by DWPF Laboratory being needed before further implementation of the Cs{sub 2}CO{sub 3} method at that laboratory. While the SME acceptability testing of the Isolok does not address any of the open issues remaining after the publication of the recommendation for the replacement of the mixed acid method by the Cs{sub 2}CO{sub 3} method (since those issues are to be addressed by the DWPF Laboratory), the Cs{sub 2}CO{sub 3} testing associated with the Isolok testing does provide additional insight into the performance of the method as conducted by SRNL. The performance is to be investigated by looking to the composition measurement data generated by the samples of a standard glass, the Analytical Reference Glass - 1 (ARG-1), that were prepared by the Cs{sub 2}CO{sub 3} method and included in the SME acceptability testing of the Isolok. The measurements of these samples were presented as part of the study results, but no statistical analysis of these measurements was conducted as part of those results. It is the purpose of this report to provide that analysis, which was supported using JMP Version 7.0.2.« less

Effects of mixing on resolved and unresolved scales on stratospheric age of air

NASA Astrophysics Data System (ADS)

Dietmüller, Simone; Garny, Hella; Plöger, Felix; Jöckel, Patrick; Cai, Duy

2017-06-01

Mean age of air (AoA) is a widely used metric to describe the transport along the Brewer-Dobson circulation. We seek to untangle the effects of different processes on the simulation of AoA, using the chemistry-climate model EMAC (ECHAM/MESSy Atmospheric Chemistry) and the Chemical Lagrangian Model of the Stratosphere (CLaMS). Here, the effects of residual transport and two-way mixing on AoA are calculated. To do so, we calculate the residual circulation transit time (RCTT). The difference of AoA and RCTT is defined as aging by mixing. However, as diffusion is also included in this difference, we further use a method to directly calculate aging by mixing on resolved scales. Comparing these two methods of calculating aging by mixing allows for separating the effect of unresolved aging by mixing (which we term aging by diffusion in the following) in EMAC and CLaMS. We find that diffusion impacts AoA by making air older, but its contribution plays a minor role (order of 10 %) in all simulations. However, due to the different advection schemes of the two models, aging by diffusion has a larger effect on AoA and mixing efficiency in EMAC, compared to CLaMS. Regarding the trends in AoA, in CLaMS the AoA trend is negative throughout the stratosphere except in the Northern Hemisphere middle stratosphere, consistent with observations. This slight positive trend is neither reproduced in a free-running nor in a nudged simulation with EMAC - in both simulations the AoA trend is negative throughout the stratosphere. Trends in AoA are mainly driven by the contributions of RCTT and aging by mixing, whereas the contribution of aging by diffusion plays a minor role.

Development of a Self-Rated Mixed Methods Skills Assessment: The National Institutes of Health Mixed Methods Research Training Program for the Health Sciences.

PubMed

Guetterman, Timothy C; Creswell, John W; Wittink, Marsha; Barg, Fran K; Castro, Felipe G; Dahlberg, Britt; Watkins, Daphne C; Deutsch, Charles; Gallo, Joseph J

2017-01-01

Demand for training in mixed methods is high, with little research on faculty development or assessment in mixed methods. We describe the development of a self-rated mixed methods skills assessment and provide validity evidence. The instrument taps six research domains: "Research question," "Design/approach," "Sampling," "Data collection," "Analysis," and "Dissemination." Respondents are asked to rate their ability to define or explain concepts of mixed methods under each domain, their ability to apply the concepts to problems, and the extent to which they need to improve. We administered the questionnaire to 145 faculty and students using an internet survey. We analyzed descriptive statistics and performance characteristics of the questionnaire using the Cronbach alpha to assess reliability and an analysis of variance that compared a mixed methods experience index with assessment scores to assess criterion relatedness. Internal consistency reliability was high for the total set of items (0.95) and adequate (≥0.71) for all but one subscale. Consistent with establishing criterion validity, respondents who had more professional experiences with mixed methods (eg, published a mixed methods article) rated themselves as more skilled, which was statistically significant across the research domains. This self-rated mixed methods assessment instrument may be a useful tool to assess skills in mixed methods for training programs. It can be applied widely at the graduate and faculty level. For the learner, assessment may lead to enhanced motivation to learn and training focused on self-identified needs. For faculty, the assessment may improve curriculum and course content planning.

Characterization of Copper-Manganese-Aluminum-Magnesium Mixed Oxyhydroxide and Oxide Catalysts for Redox Reactions

NASA Astrophysics Data System (ADS)

Baksi, Arnab; Cocke, David L.; Gomes, Andrew; Gossage, John; Riggs, Mark; Beall, Gary; McWhinney, Hylton

Complex multi-metal catalysts require several stages in their preparation. These are: co-mixing, co-precipitation, milling and sol-gel, drying, dehydroxylation, and calcination and sometimes regeneration of the hydroxide by rehydration. These processes require thermal analysis (DTA, TGA, DSC) and accompanying off gas analysis, plus one or more of these: XRD, XPS, SEMEDS, FTIR and UV-VIS. In this study, hydrotalcite, hopcalite and mixed systems were prepared and guided by the above characterization techniques. The systems were initiated by mixing the chlorides or nitrates followed by hydrothermal treatments to produce the hydroxides which were further treated by washing, drying, and calcination. The thermal analysis was critical to guide the preparation through these stages and when combined with structural determination methods considerable understanding of their chemical and physical changes was obtained. The correlations between preparation and characterization will be discussed.

Template-free synthesis of mesoporous nanoring-like Zn-Co mixed oxides with high lithium storage performance

NASA Astrophysics Data System (ADS)

Lu, Lun; Gao, Yan-Li; Yang, Zhi-Zheng; Wang, Cheng; Wang, Jin-Guo; Wang, Hui-Yuan; Jiang, Qi-Chuan

2018-04-01

Mesoporous nanoring-like Zn-Co mixed oxides are synthesized via a simple template-free solvothermal method with a subsequent annealing process. The ring-like nanostructures with hollow interiors are formed under the complexing effects of potassium sodium tartrate. Numerous mesopores are generated after the precursor is annealed at 500 °C. When applied as anode materials, the mesoporous nanoring-like Zn-Co mixed oxides can deliver a high discharge capacity of 1102 mAh g-1 after 200 cycles at 500 mA g-1. Even when the current density is increased to 2 A g-1, the mixed oxides can still retain a reversible capacity of 761 mAh g-1. Such high cycling stability and rate capability are mainly derived from the unique mesoporous ring-like nanostructures and the synergistic effects between Zn and Co based oxides.

Effect of Blockage and Location on Mixing of Swirling Coaxial Jets in a Non-expanding Circular Confinement

NASA Astrophysics Data System (ADS)

Patel, V. K.; Singh, S. N.; Seshadri, V.

2013-06-01

A study is conducted to evolve an effective design concept to improve mixing in a combustor chamber to reduce the amount of intake air. The geometry used is that of a gas turbine combustor model. For simplicity, both the jets have been considered as air jets and effect of heat release and chemical reaction has not been modeled. Various contraction shapes and blockage have been investigated by placing them downstream at different locations with respect to inlet to obtain better mixing. A commercial CFD code `Fluent 6.3' which is based on finite volume method has been used to solve the flow in the combustor model. Validation is done with the experimental data available in literature using standard k-ω turbulence model. The study has shown that contraction and blockage at optimum location enhances the mixing process. Further, the effect of swirl in the jets has also investigated.

Mixed Methods in Emerging Academic Subdisciplines: The Case of Sport Management

ERIC Educational Resources Information Center

van der Roest, Jan-Willem; Spaaij, Ramón; van Bottenburg, Maarten

2015-01-01

This article examines the prevalence and characteristics of mixed methods research in the relatively new subdiscipline of sport management. A mixed methods study is undertaken to evaluate the epistemological/philosophical, methodological, and technical levels of mixed methods design in sport management research. The results indicate that mixed…

Qualitative Approaches to Mixed Methods Practice

ERIC Educational Resources Information Center

Hesse-Biber, Sharlene

2010-01-01

This article discusses how methodological practices can shape and limit how mixed methods is practiced and makes visible the current methodological assumptions embedded in mixed methods practice that can shut down a range of social inquiry. The article argues that there is a "methodological orthodoxy" in how mixed methods is practiced…

Educational Accountability: A Qualitatively Driven Mixed-Methods Approach

ERIC Educational Resources Information Center

Hall, Jori N.; Ryan, Katherine E.

2011-01-01

This article discusses the importance of mixed-methods research, in particular the value of qualitatively driven mixed-methods research for quantitatively driven domains like educational accountability. The article demonstrates the merits of qualitative thinking by describing a mixed-methods study that focuses on a middle school's system of…

Environmental effects of interstate power trading on electricity consumption mixes.

PubMed

Marriott, Joe; Matthews, H Scott

2005-11-15

Although many studies of electricity generation use national or state average generation mix assumptions, in reality a great deal of electricity is transferred between states with very different mixes of fossil and renewable fuels, and using the average numbers could result in incorrect conclusions in these studies. We create electricity consumption profiles for each state and for key industry sectors in the U.S. based on existing state generation profiles, net state power imports, industry presence by state, and an optimization model to estimate interstate electricity trading. Using these "consumption mixes" can provide a more accurate assessment of electricity use in life-cycle analyses. We conclude that the published generation mixes for states that import power are misleading, since the power consumed in-state has a different makeup than the power that was generated. And, while most industry sectors have consumption mixes similar to the U.S. average, some of the most critical sectors of the economy--such as resource extraction and material processing sectors--are very different. This result does validate the average mix assumption made in many environmental assessments, but it is important to accurately quantify the generation methods for electricity used when doing life-cycle analyses.

Mercury Contamination - Amalgamate (contract with NFS and ADA). Demonstration of DeHg SM Process. Mixed Waste Focus Area. OST Reference Number 1675

DOE Office of Scientific and Technical Information (OSTI.GOV)

None, None

1999-09-01

Through efforts led by the Mixed Waste Focus Area (MWFA) and its Mercury Working Group (HgWG), the inventory of bulk elemental mercury contaminated with radionuclides stored at various U.S. Department of Energy (DOE) sites is thought to be approximately 16 m3 (Conley et al. 1998). At least 19 different DOE sites have this type of mixed low-level waste in their storage facilities. The U.S. Environmental Protection Agency (EPA) specifies amalgamation as the treatment method for radioactively contaminated elemental mercury. Although the chemistry of amalgamation is well known, the practical engineering of a sizable amalgamation process has not been tested (Tysonmore » 1993). To eliminate the existing DOE inventory in a reasonable timeframe, scalable equipment is needed that can produce waste forms that meet the EPA definition of amalgamation, produce waste forms that pass the EPA Toxicity Characteristic Leaching Procedure (TCLP) limit of 0.20 mg/L, limit mercury vapor concentrations during processing to below the Occupational Safety and Health Administration’s (OSHA) 8-h worker exposure limit (50 mg/m3) for mercury, and perform the above economically.« less

The mixing effects for real gases and their mixtures

NASA Astrophysics Data System (ADS)

Gong, M. Q.; Luo, E. C.; Wu, J. F.

2004-10-01

The definitions of the adiabatic and isothermal mixing effects in the mixing processes of real gases were presented in this paper. Eight substances with boiling-point temperatures from cryogenic temperature to the ambient temperature were selected from the interest of low temperature refrigeration to study their binary and multicomponent mixing effects. Detailed analyses were made on the parameters of the mixing process to know their influences on mixing effects. Those parameters include the temperatures, pressures, and mole fraction ratios of pure substances before mixing. The results show that the maximum temperature variation occurs at the saturation state of each component in the mixing process. Those components with higher boiling-point temperatures have higher isothermal mixing effects. The maximum temperature variation which is defined as the adiabatic mixing effect can even reach up to 50 K, and the isothermal mixing effect can reach about 20 kJ/mol. The possible applications of the mixing cooling effect in both open cycle and closed cycle refrigeration systems were also discussed.

Challenges of rehabilitation case mix measurement in Ontario hospitals.

PubMed

Sutherland, Jason Murray; Walker, Jan

2008-03-01

Case mix classification systems have been adopted in many countries as a method to manage and finance healthcare in acute care settings; the most popular systems are based on diagnosis related groups. The most successful of those case mix systems differentiate patient types by reflecting both the intensity of resources consumed and patient acuity. Case mix systems for use with non-acute hospital activity have not been as wide-spread; other than in the United States, little attention has been directed towards case mix classification for rehabilitation activity. In a province with over 13 million inhabitants with 2496 rehabilitation beds, inpatient rehabilitation is an important component of hospital care in Ontario, Canada, and consists of the spectrum of intensive rehabilitation activities intended to restore function. Although case mix adjusted activity has been the currency in Ontario's Integrated Population Based Allocation hospital funding formula, rehabilitation activity has not been subjected to case mix measurement. A project to examine case mix classification for adult inpatient rehabilitation activity was initiated by the Ontario Ministry of Health and Long-Term Care whose outcome was a case mix system and associated cost weights that would result in rehabilitation activity being incorporated into the hospital funding formula. The process described in this study provides Ontario's provincial government with a case mix classification system for adult inpatient rehabilitation activity although there remain areas for improvement.

Using mixed methods to develop and evaluate complex interventions in palliative care research.

PubMed

Farquhar, Morag C; Ewing, Gail; Booth, Sara

2011-12-01

there is increasing interest in combining qualitative and quantitative research methods to provide comprehensiveness and greater knowledge yield. Mixed methods are valuable in the development and evaluation of complex interventions. They are therefore particularly valuable in palliative care research where the majority of interventions are complex, and the identification of outcomes particularly challenging. this paper aims to introduce the role of mixed methods in the development and evaluation of complex interventions in palliative care, and how they may be used in palliative care research. the paper defines mixed methods and outlines why and how mixed methods are used to develop and evaluate complex interventions, with a pragmatic focus on design and data collection issues and data analysis. Useful texts are signposted and illustrative examples provided of mixed method studies in palliative care, including a detailed worked example of the development and evaluation of a complex intervention in palliative care for breathlessness. Key challenges to conducting mixed methods in palliative care research are identified in relation to data collection, data integration in analysis, costs and dissemination and how these might be addressed. the development and evaluation of complex interventions in palliative care benefit from the application of mixed methods. Mixed methods enable better understanding of whether and how an intervention works (or does not work) and inform the design of subsequent studies. However, they can be challenging: mixed method studies in palliative care will benefit from working with agreed protocols, multidisciplinary teams and engaging staff with appropriate skill sets.

Thermodynamic and energy efficiency analysis of power generation from natural salinity gradients by pressure retarded osmosis.

PubMed

Yip, Ngai Yin; Elimelech, Menachem

2012-05-01

The Gibbs free energy of mixing dissipated when fresh river water flows into the sea can be harnessed for sustainable power generation. Pressure retarded osmosis (PRO) is one of the methods proposed to generate power from natural salinity gradients. In this study, we carry out a thermodynamic and energy efficiency analysis of PRO work extraction. First, we present a reversible thermodynamic model for PRO and verify that the theoretical maximum extractable work in a reversible PRO process is identical to the Gibbs free energy of mixing. Work extraction in an irreversible constant-pressure PRO process is then examined. We derive an expression for the maximum extractable work in a constant-pressure PRO process and show that it is less than the ideal work (i.e., Gibbs free energy of mixing) due to inefficiencies intrinsic to the process. These inherent inefficiencies are attributed to (i) frictional losses required to overcome hydraulic resistance and drive water permeation and (ii) unutilized energy due to the discontinuation of water permeation when the osmotic pressure difference becomes equal to the applied hydraulic pressure. The highest extractable work in constant-pressure PRO with a seawater draw solution and river water feed solution is 0.75 kWh/m(3) while the free energy of mixing is 0.81 kWh/m(3)-a thermodynamic extraction efficiency of 91.1%. Our analysis further reveals that the operational objective to achieve high power density in a practical PRO process is inconsistent with the goal of maximum energy extraction. This study demonstrates thermodynamic and energetic approaches for PRO and offers insights on actual energy accessible for utilization in PRO power generation through salinity gradients. © 2012 American Chemical Society

Experimental validation of thermo-chemical algorithm for a simulation of pultrusion processes

NASA Astrophysics Data System (ADS)

Barkanov, E.; Akishin, P.; Miazza, N. L.; Galvez, S.; Pantelelis, N.

2018-04-01

To provide better understanding of the pultrusion processes without or with temperature control and to support the pultrusion tooling design, an algorithm based on the mixed time integration scheme and nodal control volumes method has been developed. At present study its experimental validation is carried out by the developed cure sensors measuring the electrical resistivity and temperature on the profile surface. By this verification process the set of initial data used for a simulation of the pultrusion process with rod profile has been successfully corrected and finally defined.

A necessarily complex model to explain the biogeography of the amphibians and reptiles of Madagascar.

PubMed

Brown, Jason L; Cameron, Alison; Yoder, Anne D; Vences, Miguel

2014-10-09

Pattern and process are inextricably linked in biogeographic analyses, though we can observe pattern, we must infer process. Inferences of process are often based on ad hoc comparisons using a single spatial predictor. Here, we present an alternative approach that uses mixed-spatial models to measure the predictive potential of combinations of hypotheses. Biodiversity patterns are estimated from 8,362 occurrence records from 745 species of Malagasy amphibians and reptiles. By incorporating 18 spatially explicit predictions of 12 major biogeographic hypotheses, we show that mixed models greatly improve our ability to explain the observed biodiversity patterns. We conclude that patterns are influenced by a combination of diversification processes rather than by a single predominant mechanism. A 'one-size-fits-all' model does not exist. By developing a novel method for examining and synthesizing spatial parameters such as species richness, endemism and community similarity, we demonstrate the potential of these analyses for understanding the diversification history of Madagascar's biota.

Development of a Self-Rated Mixed Methods Skills Assessment: The NIH Mixed Methods Research Training Program for the Health Sciences

PubMed Central

Guetterman, Timothy C.; Creswell, John W.; Wittink, Marsha; Barg, Fran K.; Castro, Felipe G.; Dahlberg, Britt; Watkins, Daphne C.; Deutsch, Charles; Gallo, Joseph J.

2017-01-01

Introduction Demand for training in mixed methods is high, with little research on faculty development or assessment in mixed methods. We describe the development of a Self-Rated Mixed Methods Skills Assessment and provide validity evidence. The instrument taps six research domains: “Research question,” “Design/approach,” “Sampling,” “Data collection,” “Analysis,” and “Dissemination.” Respondents are asked to rate their ability to define or explain concepts of mixed methods under each domain, their ability to apply the concepts to problems, and the extent to which they need to improve. Methods We administered the questionnaire to 145 faculty and students using an internet survey. We analyzed descriptive statistics and performance characteristics of the questionnaire using Cronbach’s alpha to assess reliability and an ANOVA that compared a mixed methods experience index with assessment scores to assess criterion-relatedness. Results Internal consistency reliability was high for the total set of items (.95) and adequate (>=.71) for all but one subscale. Consistent with establishing criterion validity, respondents who had more professional experiences with mixed methods (e.g., published a mixed methods paper) rated themselves as more skilled, which was statistically significant across the research domains. Discussion This Self-Rated Mixed Methods Assessment instrument may be a useful tool to assess skills in mixed methods for training programs. It can be applied widely at the graduate and faculty level. For the learner, assessment may lead to enhanced motivation to learn and training focused on self-identified needs. For faculty, the assessment may improve curriculum and course content planning. PMID:28562495

Tidal Energy Available for Deep Ocean Mixing: Bounds from Altimetry Data

NASA Technical Reports Server (NTRS)

Egbert, Gary D.; Ray, Richard D.

1999-01-01

Maintenance of the large-scale thermohaline circulation has long presented a problem to oceanographers. Observed mixing rates in the pelagic ocean are an order of magnitude too small to balance the rate at which dense bottom water is created at high latitudes. Recent observational and theoretical work suggests that much of this mixing may occur in hot spots near areas of rough topography (e.g., mid-ocean ridges and island arcs). Barotropic tidal currents provide a very plausible source of energy to maintain these mixing processes. Topex/Poseidon (T/P) satellite altimetry data have made precise mapping of open ocean tidal elevations possible for the first time. We can thus obtain empirical, spatially localized, estimates of barotropic tidal dissipation. These provide an upper bound on the amount of tidal energy that is dissipated in the deep ocean, and hence is available for deep mixing. We will present and compare maps of open ocean tidal energy flux divergence, and estimates of tidal energy flux into shallow seas, derived from T/P altimetry data using both formal data assimilation methods and empirical approaches. With the data assimilation methods we can place formal error bars on the fluxes. Our results show that 20-25% of tidal energy dissipation occurs outside of the shallow seas, the traditional sink for tidal energy. This suggests that up to 1 TW of energy may be available from the tides (lunar and solar) for mixing the deep ocean. The dissipation indeed appears to be concentrated over areas of rough topography.

Tidal Energy Available for Deep Ocean Mixing: Bounds From Altimetry Data

NASA Technical Reports Server (NTRS)

Egbert, Gary D.; Ray, Richard D.

1999-01-01

Maintenance of the large-scale thermohaline circulation has long presented a problem to oceanographers. Observed mixing rates in the pelagic ocean are an order of magnitude too small to balance the rate at which dense bottom water is created at high latitudes. Recent observational and theoretical work suggests that much of this mixing may occur in hot spots near areas of rough topography (e.g., mid-ocean ridges and island arcs). Barotropic tidal currents provide a very plausible source of energy to maintain these mixing processes. Topex/Poseidon satellite altimetry data have made precise mapping of open ocean tidal elevations possible for the first time. We can thus obtain empirical, spatially localized, estimates of barotropic tidal dissipation. These provide an upper bound on the amount of tidal energy that is dissipated in the deep ocean, and hence is available for deep mixing. We will present and compare maps of open ocean tidal energy flux divergence, and estimates of tidal energy flux into shallow seas, derived from T/P altimetry data using both formal data assimilation methods and empirical approaches. With the data assimilation methods we can place formal error bars on the fluxes. Our results show that 20-25% of tidal energy dissipation occurs outside of the shallow seas, the traditional sink for tidal energy. This suggests that up to 1 TW of energy may be available from the tides (lunar and solar) for mixing the deep ocean. The dissipation indeed appears to be concentrated over areas of rough topography.

Tidal Energy Available for Deep Ocean Mixing: Bounds from Altimetry Data

NASA Technical Reports Server (NTRS)

Ray, Richard D.; Egbert, Gary D.

1999-01-01

Maintenance of the large-scale thermohaline circulation has long presented an interesting problem. Observed mixing rates in the pelagic ocean are an order of magnitude too small to balance the rate at which dense bottom water is created at high latitudes. Recent observational and theoretical work suggests that much of this mixing may occur in hot spots near areas of rough topography (e.g., mid-ocean ridges and island arcs). Barotropic tidal currents provide a very plausible source of energy to maintain these mixing processes. Topex/Poseidon satellite altimetry data have made precise mapping of open ocean tidal elevations possible for the first time. We can thus obtain empirical, spatially localized, estimates of barotropic tidal dissipation. These provide an upper bound on the amount of tidal energy that is dissipated in the deep ocean, and hence is available for deep mixing. We will present and compare maps of open ocean tidal energy flux divergence, and estimates of tidal energy flux into shallow seas, derived from T/P altimetry data using both formal data assimilation methods and empirical approaches. With the data assimilation methods we can place formal error bars on the fluxes. Our results show that 20-25% of tidal energy dissipation occurs outside of the shallow seas, the traditional sink for tidal energy. This suggests that up to 1 TW of energy may be available from the tides (lunar and solar) for mixing the deep ocean. The dissipation indeed appears to be concentrated over areas of rough topography.

Mixed Methods in Biomedical and Health Services Research

PubMed Central

Curry, Leslie A.; Krumholz, Harlan M.; O’Cathain, Alicia; Plano Clark, Vicki L.; Cherlin, Emily; Bradley, Elizabeth H.

2013-01-01

Mixed methods studies, in which qualitative and quantitative methods are combined in a single program of inquiry, can be valuable in biomedical and health services research, where the complementary strengths of each approach can yield greater insight into complex phenomena than either approach alone. Although interest in mixed methods is growing among science funders and investigators, written guidance on how to conduct and assess rigorous mixed methods studies is not readily accessible to the general readership of peer-reviewed biomedical and health services journals. Furthermore, existing guidelines for publishing mixed methods studies are not well known or applied by researchers and journal editors. Accordingly, this paper is intended to serve as a concise, practical resource for readers interested in core principles and practices of mixed methods research. We briefly describe mixed methods approaches and present illustrations from published biomedical and health services literature, including in cardiovascular care, summarize standards for the design and reporting of these studies, and highlight four central considerations for investigators interested in using these methods. PMID:23322807

Mixed-Poisson Point Process with Partially-Observed Covariates: Ecological Momentary Assessment of Smoking.

PubMed

Neustifter, Benjamin; Rathbun, Stephen L; Shiffman, Saul

2012-01-01

Ecological Momentary Assessment is an emerging method of data collection in behavioral research that may be used to capture the times of repeated behavioral events on electronic devices, and information on subjects' psychological states through the electronic administration of questionnaires at times selected from a probability-based design as well as the event times. A method for fitting a mixed Poisson point process model is proposed for the impact of partially-observed, time-varying covariates on the timing of repeated behavioral events. A random frailty is included in the point-process intensity to describe variation among subjects in baseline rates of event occurrence. Covariate coefficients are estimated using estimating equations constructed by replacing the integrated intensity in the Poisson score equations with a design-unbiased estimator. An estimator is also proposed for the variance of the random frailties. Our estimators are robust in the sense that no model assumptions are made regarding the distribution of the time-varying covariates or the distribution of the random effects. However, subject effects are estimated under gamma frailties using an approximate hierarchical likelihood. The proposed approach is illustrated using smoking data.

Using supercritical fluids to refine hydrocarbons

DOEpatents

Yarbro, Stephen Lee

2014-11-25

This is a method to reactively refine hydrocarbons, such as heavy oils with API gravities of less than 20.degree. and bitumen-like hydrocarbons with viscosities greater than 1000 cp at standard temperature and pressure using a selected fluid at supercritical conditions. The reaction portion of the method delivers lighter weight, more volatile hydrocarbons to an attached contacting device that operates in mixed subcritical or supercritical modes. This separates the reaction products into portions that are viable for use or sale without further conventional refining and hydro-processing techniques. This method produces valuable products with fewer processing steps, lower costs, increased worker safety due to less processing and handling, allow greater opportunity for new oil field development and subsequent positive economic impact, reduce related carbon dioxide, and wastes typical with conventional refineries.

Non-isothermal crystallization kinetics of eucalyptus lignosulfonate/polyvinyl alcohol composite.

PubMed

Ye, De-Zhan; Zhang, Xi; Gu, Shaojin; Zhou, Yingshan; Xu, Weilin

2017-04-01

The nonisothermal crystallinization kinetic was performed on Polyvinyl alcohol (PVA) mixed with eucalyptus lignosulfonate calcuim (HLS) as the biobased thermal stabilizer, which was systematically analyzed based on Jeziorny model, Ozawa equation and the Mo method. The results indicated that the entire crystallization process took place through two main stages involving the primary and secondary crystallization processes. The Mo method described nonisothermal crystallization behavior well. Based on the results of the half time for completing crystallization, k c value in Jeziorny model, F(T) value in Mo method and crystallization activation energy, it was concluded that low loading of HLS accelerated PVA crystallization process, however, the growth rate of PVA crystallization was impeded at high content of HLS. Copyright © 2017 Elsevier B.V. All rights reserved.

Student Characteristics, Prior Experiences, and the Perception of Mixed Methods as an Innovation

ERIC Educational Resources Information Center

Brown, Sydney E.

2014-01-01

There are persistent challenges to teaching mixed methods and innovative solutions are sought in order to address the needs of an increasingly diverse global audience seeking mixed methods instruction. This mixed methods study was conducted to gain insights to course design by more fully understanding the relationships among graduate student…

Validity in Mixed Methods Research in Education: The Application of Habermas' Critical Theory

ERIC Educational Resources Information Center

Long, Haiying

2017-01-01

Mixed methods approach has developed into the third methodological movement in educational research. Validity in mixed methods research as an important issue, however, has not been examined as extensively as that of quantitative and qualitative research. Additionally, the previous discussions of validity in mixed methods research focus on research…

Moments, Mixed Methods, and Paradigm Dialogs

ERIC Educational Resources Information Center

Denzin, Norman K.

2010-01-01

I reread the 50-year-old history of the qualitative inquiry that calls for triangulation and mixed methods. I briefly visit the disputes within the mixed methods community asking how did we get to where we are today, the period of mixed-multiple-methods advocacy, and Teddlie and Tashakkori's third methodological moment. (Contains 10 notes.)

Integrative Mixed Methods Data Analytic Strategies in Research on School Success in Challenging Circumstances

ERIC Educational Resources Information Center

Jang, Eunice E.; McDougall, Douglas E.; Pollon, Dawn; Herbert, Monique; Russell, Pia

2008-01-01

There are both conceptual and practical challenges in dealing with data from mixed methods research studies. There is a need for discussion about various integrative strategies for mixed methods data analyses. This article illustrates integrative analytic strategies for a mixed methods study focusing on improving urban schools facing challenging…