Actions speak louder than words: Outsiders' perceptions of diversity mixed messages.

PubMed

Windscheid, Leon; Bowes-Sperry, Lynn; Kidder, Deborah L; Cheung, Ho Kwan; Morner, Michèle; Lievens, Filip

2016-09-01

To attract a gender diverse workforce, many employers use diversity statements to publicly signal that they value gender diversity. However, this often represents a misalignment between words and actions (i.e., a diversity mixed message) because most organizations are male dominated, especially in board positions. We conducted 3 studies to investigate the potentially indirect effect of such diversity mixed messages through perceived behavioral integrity on employer attractiveness. In Study 1, following a 2 × 2 design, participants (N = 225) were either shown a pro gender diversity statement or a neutral statement, in combination with a gender diverse board (4 men and 4 women) or a uniform all-male board (8 men). Participants' perceived behavioral integrity of the organization was assessed. In Study 2, participants (N = 251) either read positive or negative reviews of the organization's behavioral integrity. Employer attractiveness was then assessed. Study 3 (N = 427) investigated the impact of board gender composition on perceived behavioral integrity and employer attractiveness using a bootstrapping procedure. Both the causal-chain design of Study 1 and 2, as well as the significance test of the proposed indirect relationship in Study 3, revealed that a diversity mixed message negatively affected an organization's perceived behavioral integrity, and low behavioral integrity in turn negatively impacted employer attractiveness. In Study 3, there was also evidence for a tipping point (more than 1 woman on the board was needed) with regard to participants' perceptions of the organization's behavioral integrity. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Mixed methods research design for pragmatic psychoanalytic studies.

PubMed

Tillman, Jane G; Clemence, A Jill; Stevens, Jennifer L

2011-10-01

Calls for more rigorous psychoanalytic studies have increased over the past decade. The field has been divided by those who assert that psychoanalysis is properly a hermeneutic endeavor and those who see it as a science. A comparable debate is found in research methodology, where qualitative and quantitative methods have often been seen as occupying orthogonal positions. Recently, Mixed Methods Research (MMR) has emerged as a viable "third community" of research, pursuing a pragmatic approach to research endeavors through integrating qualitative and quantitative procedures in a single study design. Mixed Methods Research designs and the terminology associated with this emerging approach are explained, after which the methodology is explored as a potential integrative approach to a psychoanalytic human science. Both qualitative and quantitative research methods are reviewed, as well as how they may be used in Mixed Methods Research to study complex human phenomena.

Albuquerque Operations Office, Albuquerque, New Mexico: Technology summary

DOE Office of Scientific and Technical Information (OSTI.GOV)

Not Available

1994-08-01

This document has been prepared by the Department of Energy`s (DOE) Environmental Management (EM) Office of Technology Development (OTD) in order to highlight research, development, demonstration, testing, and evaluation (RDDT&E) activities funded through the Albuquerque Operations Office. Technologies and processes described have the potential to enhance DOE`s cleanup and waste management efforts, as well as improve US industry`s competitiveness in global environmental markets. The information has been assembled from recently produced OTD documents that highlight technology development activities within each of the OTD program elements. These integrated program summaries include: Volatile Organic Compounds in Non-Arid Soils, Volatile Organic Compounds inmore » Arid Soils, Mixed Waste Landfill Integrated Demonstration, Uranium in Soils Integrated Demonstration, Characterization, Monitoring, and Sensor Technology, In Situ Remediation, Buried Waste Integrated Demonstration, Underground Storage Tank, Efficient Separations and Processing, Mixed Waste Integrated Program, Rocky Flats Compliance Program, Pollution Prevention Program, Innovation Investment Area, and Robotics Technology.« less

Can farmers mitigate environmental impacts through combined production of food, fuel and feed? A consequential life cycle assessment of integrated mixed crop-livestock system with a green biorefinery.

PubMed

Parajuli, Ranjan; Dalgaard, Tommy; Birkved, Morten

2018-04-01

This study evaluates environmental impacts of an integrated mixed crop-livestock system with a green biorefinery (GBR). System integration included production of feed crops and green biomasses (Sys-I) to meet the demand of a livestock system (Sys-III) and to process green biomasses in a GBR system (Sys-II). Processing of grass-clover to produce feed protein was considered in Sys-II, particularly to substitute the imported soybean meal. Waste generated from the livestock and GBR systems were considered for the conversion to biomethane (Sys-IV). Digestate produced therefrom was assumed to be recirculated back to the farmers' field (Sys-I). A consequential approach of Life Cycle Assessment (LCA) method was used to evaluate the environmental impacts of a combined production of suckler cow calves (SCC) and Pigs, calculated in terms of their live weight (LW). The functional unit (FU) was a basket of two products "1kg LW -SCC+1kg LW -Pigs", produced at the farm gate. Results obtained per FU were: 19.6kg CO 2 eq for carbon footprint; 0.11kg PO 4 eq for eutrophication potential, -129MJ eq for non-renewable energy use and -3.9 comparative toxicity units (CTU e ) for potential freshwater ecotoxicity. Environmental impact, e.g. greenhouse gas (GHG) emission was primarily due to (i) N 2 O emission and diesel consumption within Sys-I, (ii) energy input to Sys-II, III and IV, and (iii) methane emission from Sys-III and Sys-IV. Specifically, integrating GBR with the mixed crop-livestock system contributed 4% of the GHG emissions, whilst its products credited 7% of the total impact. Synergies among the different sub-systems showed positive environmental gains for the selected main products. The main effects of the system integration were in the reductions of GHG emissions, fossil fuel consumption, eutrophication potential and freshwater ecotoxicity, compared to a conventional mixed crop-livestock system, without the biogas conversion facility and the GBR. Copyright © 2017 Elsevier B.V. All rights reserved.

Chaotic mixing in microchannels via low frequency switching transverse electroosmotic flow generated on integrated microelectrodes.

PubMed

Song, Hongjun; Cai, Ziliang; Noh, Hongseok Moses; Bennett, Dawn J

2010-03-21

In this paper we present a numerical and experimental investigation of a chaotic mixer in a microchannel via low frequency switching transverse electroosmotic flow. By applying a low frequency, square-wave electric field to a pair of parallel electrodes placed at the bottom of the channel, a complex 3D spatial and time-dependence flow was generated to stretch and fold the fluid. This significantly enhanced the mixing effect. The mixing mechanism was first investigated by numerical and experimental analysis. The effects of operational parameters such as flow rate, frequency, and amplitude of the applied voltage have also been investigated. It is found that the best mixing performance is achieved when the frequency is around 1 Hz, and the required mixing length is about 1.5 mm for the case of applied electric potential 5 V peak-to-peak and flow rate 75 microL h(-1). The mixing performance was significantly enhanced when the applied electric potential increased or the flow rate of fluids decreased.

Effective Thermo-Capillary Mixing in Droplet Microfluidics Integrated with a Microwave Heater.

PubMed

Yesiloz, Gurkan; Boybay, Muhammed S; Ren, Carolyn L

2017-02-07

In this study, we present a microwave-based microfluidic mixer that allows rapid mixing within individual droplets efficiently. The designed microwave mixer is a coplanar design with a small footprint, which is fabricated on a glass substrate and integrated with a microfluidic chip. The mixer works essentially as a resonator that accumulates an intensive electromagnetic field into a spiral capacitive gap (around 200 μm), which provides sufficient energy to heat-up droplets that pass through the capacitive gap. This microwave actuation induces nonuniform Marangoni stresses on the interface, which results in three-dimensional motion inside the droplet and thus fast mixing. In order to evaluate the performance of the microwave mixer, droplets with highly viscous fluid, 75% (w/w) glycerol solution, were generated, half of which were seeded with fluorescent dye for imaging purposes. The relative importance of different driving forces for mixing was evaluated qualitatively using magnitude analysis, and the effect of the applied power on mixing performance was also investigated. Mixing efficiency was quantified using the mixing index, which shows as high as 97% mixing efficiency was achieved within the range of milliseconds. This work demonstrates a very unique approach of utilizing microwave technology to facilitate mixing in droplet microfluidics systems, which can potentially open up areas for biochemical synthesis applications.

Levels of reconstruction as complementarity in mixed methods research: a social theory-based conceptual framework for integrating qualitative and quantitative research.

PubMed

Carroll, Linda J; Rothe, J Peter

2010-09-01

Like other areas of health research, there has been increasing use of qualitative methods to study public health problems such as injuries and injury prevention. Likewise, the integration of qualitative and quantitative research (mixed-methods) is beginning to assume a more prominent role in public health studies. Likewise, using mixed-methods has great potential for gaining a broad and comprehensive understanding of injuries and their prevention. However, qualitative and quantitative research methods are based on two inherently different paradigms, and their integration requires a conceptual framework that permits the unity of these two methods. We present a theory-driven framework for viewing qualitative and quantitative research, which enables us to integrate them in a conceptually sound and useful manner. This framework has its foundation within the philosophical concept of complementarity, as espoused in the physical and social sciences, and draws on Bergson's metaphysical work on the 'ways of knowing'. Through understanding how data are constructed and reconstructed, and the different levels of meaning that can be ascribed to qualitative and quantitative findings, we can use a mixed-methods approach to gain a conceptually sound, holistic knowledge about injury phenomena that will enhance our development of relevant and successful interventions.

Using mixed methods in health research

PubMed Central

Woodman, Jenny

2013-01-01

Summary Mixed methods research is the use of quantitative and qualitative methods in a single study or series of studies. It is an emergent methodology which is increasingly used by health researchers, especially within health services research. There is a growing literature on the theory, design and critical appraisal of mixed methods research. However, there are few papers that summarize this methodological approach for health practitioners who wish to conduct or critically engage with mixed methods studies. The objective of this paper is to provide an accessible introduction to mixed methods for clinicians and researchers unfamiliar with this approach. We present a synthesis of key methodological literature on mixed methods research, with examples from our own work and that of others, to illustrate the practical applications of this approach within health research. We summarize definitions of mixed methods research, the value of this approach, key aspects of study design and analysis, and discuss the potential challenges of combining quantitative and qualitative methods and data. One of the key challenges within mixed methods research is the successful integration of quantitative and qualitative data during analysis and interpretation. However, the integration of different types of data can generate insights into a research question, resulting in enriched understanding of complex health research problems. PMID:23885291

An Analysis of Results of a High-Resolution World Ocean Circulation Model.

DTIC Science & Technology

1988-03-01

Level Experiments ............... 16 a. Baseline (Laplacian Mixing) Integration ........ 16 b. Isopycnal Mixing Integration ................... 18 3...One-Half Degree, Twenty Level Experiments .......... 18 a. Baseline (Three Year Interior Restoring) Integration...TWENTY LEVEL EXPERIMENTS .................... 21 1. Baseline (Laplacian Mixing) Integration ............. 21 2. Isopycnal Mixing Integration

Design and Parameter Study of Integrated Microfluidic Platform for CTC Isolation and Enquiry; A Numerical Approach.

PubMed

Shamloo, Amir; Ahmad, Saba; Momeni, Maede

2018-06-18

Being the second cause of mortality across the globe, there is now a persistent effort to establish new cancer medication and therapies. Any accomplishment in treating cancers entails the existence of accurate identification systems empowering the early diagnosis. Recent studies indicate CTCs’ potential in cancer prognosis as well as therapy monitoring. The chief shortcoming with CTCs is that they are exceedingly rare cells in their clinically relevant concentration. Here, we simulated a microfluidic construct devised for immunomagnetic separation of the particles of interest from the background cells. This separation unit is integrated with a mixer subunit. The mixer is envisioned for mixing the CTC enriched stream with lysis buffer to extract the biological material of the cell. Some modification was proposed on mixing geometry improving the efficacy of the functional unit. A valuation of engaged forces was made and some forces were neglected due to their order of magnitude. The position of the magnet was also optimized by doing parametric study. For the mixer unit, the effect of applied voltage and frequency on mixing index was studied to find the optimal voltage and frequency which provides better mixing. Above-mentioned studies were done on isolated units and the effect of each functional unit on the other is not studied. As the final step, an integrated microfluidic platform composed of both functional subunits was simulated simultaneously. To ensure the independence of results from the grid, grid studies were also performed. The studies carried out on the construct reveal its potential for diagnostic application.

Collaborative Science Learning in Three-Dimensional Immersive Virtual Worlds: Pre-Service Teachers' Experiences in Second Life

ERIC Educational Resources Information Center

Nussli, Natalie; Oh, Kevin; McCandless, Kevin

2014-01-01

The purpose of this mixed methods study was to help pre-service teachers experience and evaluate the potential of Second Life, a three-dimensional immersive virtual environment, for potential integration into their future teaching. By completing collaborative assignments in Second Life, nineteen pre-service general education teachers explored an…

Exploring Ivorian Perspectives on the Effectiveness of the Current Ivorian Science Curriculum in Addressing Issues Related to HIV/AIDS

ERIC Educational Resources Information Center

Ado, Gustave Firmin

2014-01-01

School-based HIV/AIDS science education has the potential to impact students when integrated into the science curriculum. However, this mixed method study shows that school-based HIV/AIDS science education is often not infused into career subjects such as science education but integrated into civics education and taught by teachers who lack the…

Clustering of samples and variables with mixed-type data

PubMed Central

Edelmann, Dominic; Kopp-Schneider, Annette

2017-01-01

Analysis of data measured on different scales is a relevant challenge. Biomedical studies often focus on high-throughput datasets of, e.g., quantitative measurements. However, the need for integration of other features possibly measured on different scales, e.g. clinical or cytogenetic factors, becomes increasingly important. The analysis results (e.g. a selection of relevant genes) are then visualized, while adding further information, like clinical factors, on top. However, a more integrative approach is desirable, where all available data are analyzed jointly, and where also in the visualization different data sources are combined in a more natural way. Here we specifically target integrative visualization and present a heatmap-style graphic display. To this end, we develop and explore methods for clustering mixed-type data, with special focus on clustering variables. Clustering of variables does not receive as much attention in the literature as does clustering of samples. We extend the variables clustering methodology by two new approaches, one based on the combination of different association measures and the other on distance correlation. With simulation studies we evaluate and compare different clustering strategies. Applying specific methods for mixed-type data proves to be comparable and in many cases beneficial as compared to standard approaches applied to corresponding quantitative or binarized data. Our two novel approaches for mixed-type variables show similar or better performance than the existing methods ClustOfVar and bias-corrected mutual information. Further, in contrast to ClustOfVar, our methods provide dissimilarity matrices, which is an advantage, especially for the purpose of visualization. Real data examples aim to give an impression of various kinds of potential applications for the integrative heatmap and other graphical displays based on dissimilarity matrices. We demonstrate that the presented integrative heatmap provides more information than common data displays about the relationship among variables and samples. The described clustering and visualization methods are implemented in our R package CluMix available from https://cran.r-project.org/web/packages/CluMix. PMID:29182671

Mixed methods in gerontological research: Do the qualitative and quantitative data “touch”?

PubMed Central

Happ, Mary Beth

2010-01-01

This paper distinguishes between parallel and integrated mixed methods research approaches. Barriers to integrated mixed methods approaches in gerontological research are discussed and critiqued. The author presents examples of mixed methods gerontological research to illustrate approaches to data integration at the levels of data analysis, interpretation, and research reporting. As a summary of the methodological literature, four basic levels of mixed methods data combination are proposed. Opportunities for mixing qualitative and quantitative data are explored using contemporary examples from published studies. Data transformation and visual display, judiciously applied, are proposed as pathways to fuller mixed methods data integration and analysis. Finally, practical strategies for mixing qualitative and quantitative data types are explicated as gerontological research moves beyond parallel mixed methods approaches to achieve data integration. PMID:20077973

Illumination with a Dim Bulb? What do social scientists learn by employing qualitative data analysis software (QDAS) in the service of multi-method designs?

PubMed Central

White, Michael J.; Judd, Maya D.; Poliandri, Simone

2012-01-01

Although there has been much optimistic discussion of integrating quantitative and qualitative findings into sociological analysis, there remains a gap regarding the application of mixed approaches. We examine the potential gains and pitfalls of such integration in the context of the growing analytic power of contemporary qualitative data analysis software (QDAS) programs. We illustrate the issues with our own research in a mixed-methods project examining low fertility in Italy, a project that combines analysis of large nationally representative survey data with qualitative in-depth interviews with women across four (4) cities in Italy. Despite the enthusiasm for mixed-methods research, the available software appears to be underutilized. In addition, we suggest that the sociological research community will want to address several conceptual and inferential issues with these approaches. PMID:23543938

Illumination with a Dim Bulb? What do social scientists learn by employing qualitative data analysis software (QDAS) in the service of multi-method designs?

PubMed

White, Michael J; Judd, Maya D; Poliandri, Simone

2012-08-01

Although there has been much optimistic discussion of integrating quantitative and qualitative findings into sociological analysis, there remains a gap regarding the application of mixed approaches. We examine the potential gains and pitfalls of such integration in the context of the growing analytic power of contemporary qualitative data analysis software (QDAS) programs. We illustrate the issues with our own research in a mixed-methods project examining low fertility in Italy, a project that combines analysis of large nationally representative survey data with qualitative in-depth interviews with women across four (4) cities in Italy. Despite the enthusiasm for mixed-methods research, the available software appears to be underutilized. In addition, we suggest that the sociological research community will want to address several conceptual and inferential issues with these approaches.

Integrated omics for the identification of key functionalities in biological wastewater treatment microbial communities.

PubMed

Narayanasamy, Shaman; Muller, Emilie E L; Sheik, Abdul R; Wilmes, Paul

2015-05-01

Biological wastewater treatment plants harbour diverse and complex microbial communities which prominently serve as models for microbial ecology and mixed culture biotechnological processes. Integrated omic analyses (combined metagenomics, metatranscriptomics, metaproteomics and metabolomics) are currently gaining momentum towards providing enhanced understanding of community structure, function and dynamics in situ as well as offering the potential to discover novel biological functionalities within the framework of Eco-Systems Biology. The integration of information from genome to metabolome allows the establishment of associations between genetic potential and final phenotype, a feature not realizable by only considering single 'omes'. Therefore, in our opinion, integrated omics will become the future standard for large-scale characterization of microbial consortia including those underpinning biological wastewater treatment processes. Systematically obtained time and space-resolved omic datasets will allow deconvolution of structure-function relationships by identifying key members and functions. Such knowledge will form the foundation for discovering novel genes on a much larger scale compared with previous efforts. In general, these insights will allow us to optimize microbial biotechnological processes either through better control of mixed culture processes or by use of more efficient enzymes in bioengineering applications. © 2015 The Authors. Microbial Biotechnology published by John Wiley & Sons Ltd and Society for Applied Microbiology.

Airframe-integrated propulsion system for hypersonic cruise vehicles

NASA Technical Reports Server (NTRS)

Jones, R. A.; Huber, P. W.

1978-01-01

The paper describes a new hydrogen-burning airframe-integrated scramjet concept which offers good potential for efficient hypersonic cruise vehicles. The characteristics of the engine which assure good performance are extensive engine-airframe integration, fixed geometry, low cooling, and control of heat release in the supersonic combustor by mixed modes of fuel injection from the combustor entrance. The present paper describes the concept and presents results from inlet tests, direct-connect combustor tests, and tests of two subscale boiler-plate research engines currently underway under conditions which simulate flight at Mach 4 and 7. It is concluded that this engine concept has the potential for high thrust and efficiency, low drag and weight, low cooling requirement, and application to a wide range of vehicle sizes.

Considerations for Integrating Women into Closed Occupations in the U.S. Special Operations Forces

DTIC Science & Technology

2015-05-01

effectiveness of integration. Ideally, studies adopting an experimental design (using both test and control groups ) would be preferred, but sample sizes may...data -- a survey of SOF personnel and a series of focus group discussions -- collected by the research team regarding the potential challenges to... controlled positions. This report summarizes our research , analysis, and conclusions. We used a mixed-methods approach. We reviewed the current state of

Development of a floating photobioreactor with internal partitions for efficient utilization of ocean wave into improved mass transfer and algal culture mixing.

PubMed

Kim, Z-Hun; Park, Hanwool; Hong, Seong-Joo; Lim, Sang-Min; Lee, Choul-Gyun

2016-05-01

Culturing microalgae in the ocean has potentials that may reduce the production cost and provide an option for an economic biofuel production from microalgae. The ocean holds great potentials for mass microalgal cultivation with its high specific heat, mixing energy from waves, and large cultivable area. Suitable photobioreactors (PBRs) that are capable of integrating marine energy into the culture systems need to be developed for the successful ocean cultivation. In this study, prototype floating PBRs were designed and constructed using transparent low-density polyethylene film for microalgal culture in the ocean. To improve the mixing efficiency, various types of internal partitions were introduced within PBRs. Three different types of internal partitions were evaluated for their effects on the mixing efficiency in terms of mass transfer (k(L)a) and mixing time in the PBRs. The partition type with the best mixing efficiency was selected, and the number of partitions was varied from one to three for investigation of its effect on mixing efficiency. When the number of partitions is increased, mass transfer increased in proportion to the number of partitions. However, mixing time was not directly related to the number of partitions. When a green microalga, Tetraselmis sp. was cultivated using PBRs with the selected partition under semi-continuous mode in the ocean, biomass and fatty acid productivities in the PBRs were increased by up to 50 % and 44% at high initial cell density, respectively, compared to non-partitioned ones. The results of internally partitioned PBRs demonstrated potentials for culturing microalgae by efficiently utilizing ocean wave energy into culture mixing in the ocean.

Mechanism-based classification of PAH mixtures to predict carcinogenic potential

DOE PAGES

Tilton, Susan C.; Siddens, Lisbeth K.; Krueger, Sharon K.; ...

2015-04-22

We have previously shown that relative potency factors and DNA adduct measurements are inadequate for predicting carcinogenicity of certain polycyclic aromatic hydrocarbons (PAHs) and PAH mixtures, particularly those that function through alternate pathways or exhibit greater promotional activity compared to benzo[ a]pyrene (BaP). Therefore, we developed a pathway based approach for classification of tumor outcome after dermal exposure to PAH/mixtures. FVB/N mice were exposed to dibenzo[ def,p]chrysene (DBC), BaP or environmental PAH mixtures (Mix 1-3) following a two-stage initiation/promotion skin tumor protocol. Resulting tumor incidence could be categorized by carcinogenic potency as DBC>>BaP=Mix2=Mix3>Mix1=Control, based on statistical significance. Gene expression profilesmore » measured in skin of mice collected 12 h post-initiation were compared to tumor outcome for identification of short-term bioactivity profiles. A Bayesian integration model was utilized to identify biological pathways predictive of PAH carcinogenic potential during initiation. Integration of probability matrices from four enriched pathways (p<0.05) for DNA damage, apoptosis, response to chemical stimulus and interferon gamma signaling resulted in the highest classification accuracy with leave-one-out cross validation. This pathway-driven approach was successfully utilized to distinguish early regulatory events during initiation prognostic for tumor outcome and provides proof-of-concept for using short-term initiation studies to classify carcinogenic potential of environmental PAH mixtures. As a result, these data further provide a ‘source-to outcome’ model that could be used to predict PAH interactions during tumorigenesis and provide an example of how mode-of-action based risk assessment could be employed for environmental PAH mixtures.« less

Mechanism-Based Classification of PAH Mixtures to Predict Carcinogenic Potential.

PubMed

Tilton, Susan C; Siddens, Lisbeth K; Krueger, Sharon K; Larkin, Andrew J; Löhr, Christiane V; Williams, David E; Baird, William M; Waters, Katrina M

2015-07-01

We have previously shown that relative potency factors and DNA adduct measurements are inadequate for predicting carcinogenicity of certain polycyclic aromatic hydrocarbons (PAHs) and PAH mixtures, particularly those that function through alternate pathways or exhibit greater promotional activity compared to benzo[a]pyrene (BaP). Therefore, we developed a pathway-based approach for classification of tumor outcome after dermal exposure to PAH/mixtures. FVB/N mice were exposed to dibenzo[def,p]chrysene (DBC), BaP, or environmental PAH mixtures (Mix 1-3) following a 2-stage initiation/promotion skin tumor protocol. Resulting tumor incidence could be categorized by carcinogenic potency as DBC > BaP = Mix2 = Mix3 > Mix1 = Control, based on statistical significance. Gene expression profiles measured in skin of mice collected 12 h post-initiation were compared with tumor outcome for identification of short-term bioactivity profiles. A Bayesian integration model was utilized to identify biological pathways predictive of PAH carcinogenic potential during initiation. Integration of probability matrices from four enriched pathways (P < .05) for DNA damage, apoptosis, response to chemical stimulus, and interferon gamma signaling resulted in the highest classification accuracy with leave-one-out cross validation. This pathway-driven approach was successfully utilized to distinguish early regulatory events during initiation prognostic for tumor outcome and provides proof-of-concept for using short-term initiation studies to classify carcinogenic potential of environmental PAH mixtures. These data further provide a 'source-to-outcome' model that could be used to predict PAH interactions during tumorigenesis and provide an example of how mode-of-action-based risk assessment could be employed for environmental PAH mixtures. © The Author 2015. Published by Oxford University Press on behalf of the Society of Toxicology. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

Integrative Mixed Methods Data Analytic Strategies in Research on School Success in Challenging Circumstances

ERIC Educational Resources Information Center

Jang, Eunice E.; McDougall, Douglas E.; Pollon, Dawn; Herbert, Monique; Russell, Pia

2008-01-01

There are both conceptual and practical challenges in dealing with data from mixed methods research studies. There is a need for discussion about various integrative strategies for mixed methods data analyses. This article illustrates integrative analytic strategies for a mixed methods study focusing on improving urban schools facing challenging…

Generic evolution of mixing in heterogeneous media

NASA Astrophysics Data System (ADS)

De Dreuzy, J.; Carrera, J.; Dentz, M.; Le Borgne, T.

2011-12-01

Mixing in heterogeneous media results from the competition bewteen flow fluctuations and local scale diffusion. Flow fluctuations quickly create concentration contrasts and thus heterogeneity of the concentration field, which is slowly homogenized by local scale diffusion. Mixing first deviates from Gaussian mixing, which represents the potential mixing induced by spreading before approaching it. This deviation fundamentally expresses the evolution of the interaction between spreading and local scale diffusion. We characterize it by the ratio γ of the non-Gaussian to the Gaussian mixing states. We define the Gaussian mixing state as the integrated squared concentration of the Gaussian plume that has the same longitudinal dispersion as the real plume. The non-Gaussian mixing state is the difference between the overall mixing state defined as the integrated squared concentration and the Gaussian mixing state. The main advantage of this definition is to use the full knowledge previously acquired on dispersion for characterizing mixing even when the solute concentration field is highly non Gaussian. Using high precision numerical simulations, we show that γ quickly increases, peaks and slowly decreases. γ can be derived from two scales characterizing spreading and local mixing, at least for large flux-weighted solute injection conditions into classically log-normal Gaussian correlated permeability fields. The spreading scale is directly related to the longitudinal dispersion. The local mixing scale is the largest scale over which solute concentrations can be considered locally uniform. More generally, beyond the characteristics of its maximum, γ turns out to have a highly generic scaling form. Its fast increase and slow decrease depend neither on the heterogeneity level, nor on the ratio of diffusion to advection, nor on the injection conditions. They might even not depend on the particularities of the flow fields as the same generic features also prevail for Taylor dispersion. This generic characterization of mixing can offer new ways to set up transport equations that honor not only advection and spreading (dispersion), but also mixing.

A Methodology for Conducting Integrative Mixed Methods Research and Data Analyses

PubMed Central

Castro, Felipe González; Kellison, Joshua G.; Boyd, Stephen J.; Kopak, Albert

2011-01-01

Mixed methods research has gained visibility within the last few years, although limitations persist regarding the scientific caliber of certain mixed methods research designs and methods. The need exists for rigorous mixed methods designs that integrate various data analytic procedures for a seamless transfer of evidence across qualitative and quantitative modalities. Such designs can offer the strength of confirmatory results drawn from quantitative multivariate analyses, along with “deep structure” explanatory descriptions as drawn from qualitative analyses. This article presents evidence generated from over a decade of pilot research in developing an integrative mixed methods methodology. It presents a conceptual framework and methodological and data analytic procedures for conducting mixed methods research studies, and it also presents illustrative examples from the authors' ongoing integrative mixed methods research studies. PMID:22167325

Synoptic-to-planetary scale wind variability enhances phytoplankton biomass at ocean fronts

NASA Astrophysics Data System (ADS)

Whitt, D. B.; Taylor, J. R.; Lévy, M.

2017-06-01

In nutrient-limited conditions, phytoplankton growth at fronts is enhanced by winds, which drive upward nutrient fluxes via enhanced turbulent mixing and upwelling. Hence, depth-integrated phytoplankton biomass can be 10 times greater at isolated fronts. Using theory and two-dimensional simulations with a coupled physical-biogeochemical ocean model, this paper builds conceptual understanding of the physical processes driving upward nutrient fluxes at fronts forced by unsteady winds with timescales of 4-16 days. The largest vertical nutrient fluxes occur when the surface mixing layer penetrates the nutricline, which fuels phytoplankton in the mixed layer. At a front, mixed layer deepening depends on the magnitude and direction of the wind stress, cross-front variations in buoyancy and velocity at the surface, and potential vorticity at the base of the mixed layer, which itself depends on past wind events. Consequently, mixing layers are deeper and more intermittent in time at fronts than outside fronts. Moreover, mixing can decouple in time from the wind stress, even without other sources of physical variability. Wind-driven upwelling also enhances depth-integrated phytoplankton biomass at fronts; when the mixed layer remains shallower than the nutricline, this results in enhanced subsurface phytoplankton. Oscillatory along-front winds induce both oscillatory and mean upwelling. The mean effect of oscillatory vertical motion is to transiently increase subsurface phytoplankton over days to weeks, whereas slower mean upwelling sustains this increase over weeks to months. Taken together, these results emphasize that wind-driven phytoplankton growth is both spatially and temporally intermittent and depends on a diverse combination of physical processes.

Points of Convergence in Music Education: The Use of Data Labels as a Strategy for Mixed Methods Integration

ERIC Educational Resources Information Center

Fitzpatrick, Kate R.

2016-01-01

Although the mixing of quantitative and qualitative data is an essential component of mixed methods research, the process of integrating both types of data in meaningful ways can be challenging. The purpose of this article is to describe the use of data labels in mixed methods research as a technique for the integration of qualitative and…

Prosody-Syntax Integration in a Second Language: Contrasting Event-Related Potentials from German and Chinese Learners of English Using Linear Mixed Effect Models

ERIC Educational Resources Information Center

Nickels, Stefanie; Steinhauer, Karsten

2018-01-01

The role of prosodic information in sentence processing is not usually addressed in second language (L2) instruction, and neurocognitive studies on prosody-syntax interactions are rare. Here we compare event-related potentials (ERP) of Chinese and German learners of English L2 to those of native English speakers and show how first language (L1)…

Mixed methods in psychotherapy research: A review of method(ology) integration in psychotherapy science.

PubMed

Bartholomew, Theodore T; Lockard, Allison J

2018-06-13

Mixed methods can foster depth and breadth in psychological research. However, its use remains in development in psychotherapy research. Our purpose was to review the use of mixed methods in psychotherapy research. Thirty-one studies were identified via the PRISMA systematic review method. Using Creswell & Plano Clark's typologies to identify design characteristics, we assessed each study for rigor and how each used mixed methods. Key features of mixed methods designs and these common patterns were identified: (a) integration of clients' perceptions via mixing; (b) understanding group psychotherapy; (c) integrating methods with cases and small samples; (d) analyzing clinical data as qualitative data; and (e) exploring cultural identities in psychotherapy through mixed methods. The review is discussed with respect to the value of integrating multiple data in single studies to enhance psychotherapy research. © 2018 Wiley Periodicals, Inc.

Nanoethics and the breaching of boundaries: a heuristic for going from encouragement to a fuller integration of ethical, legal and social issues and science : commentary on: "Adding to the mix: integrating ELSI into a National Nanoscale Science and Technology Center".

PubMed

Tuma, Julio R

2011-12-01

The intersection of ELSI and science forms a complicated nexus yet their integration is an important goal both for society and for the successful advancement of science. In what follows, I present a heuristic that makes boundary identification and crossing an important tool in the discovery of potential areas of ethical, legal, and social concern in science. A dynamic and iterative application of the heuristic can lead towards a fuller integration and appreciation of the concerns of ELSI and of science from both sides of the divide.

The Role of Salivary Neuropeptides in Pediatrics: Potential Biomarkers for Integrated Therapies.

PubMed

Gershan, Lynn A; Durham, Paul L; Skidmore, Jaci; Shimizu, Joshua; Cady, Ryan J; Sheng, Xiaoming; Maloney, Christopher G

2015-08-01

Objective measures of symptom response to integrated complementary approaches in pediatrics are evolving. The purpose of this study was to document the concentration range of salivary neuropeptides in healthy controls and in children with cancer, to explore correlations between serum and salivary measurements for Calcitonin Gene-Related Peptide (CGRP) and Vasoactive Intestinal Polypeptide (VIP), and to determine whether there is a change in these salivary neuropeptide levels in response to integrated mind-body therapies. A non-randomized pragmatic study with three phases: Phase 1- Healthy Control Saliva-10 healthy controls provided saliva samples; Phase 2- Cancer Diagnosis Serum-Saliva- 16 mixed-type cancer patients provided blood and saliva samples; Phase 3- Acute Lymphocytic Leukemia (ALL) Saliva Intervention- 12 patients with ALL provided pre- and post-complementary intervention saliva samples. 20-minutes of structured touch or scripted relaxation breathing were administered to patients in Phase 3; Phase 1 and 2 patients did not receive this intervention. cortisol, CGRP, VIP, State/Trait Anxiety Scale, visual analogue scale, vital signs. Salivary CGRP and VIP were similar for children in Phases 1 and 2. There was a correlation between serum and salivary VIP in the mixed cancer group, though not between serum and salivary CGRP. In Phase 3 children, following a complementary intervention, salivary CGRP, heart rate, and systolic blood pressure decreased. These data provide evidence of a decrease in sympathetic output after integrative/complementary therapy intervention in children with cancer. The study underscores the potential role of salivary neuropeptides as non-invasive biomarkers for integrated therapies in pediatrics.

The Role of Salivary Neuropeptides in Pediatrics: Potential Biomarkers for Integrated Therapies

PubMed Central

Gershan, Lynn A; Durham, Paul L; Skidmore, Jaci; Shimizu, Joshua; Cady, Ryan J; Sheng, Xiaoming; Maloney, Christopher G

2015-01-01

Introduction Objective measures of symptom response to integrated complementary approaches in pediatrics are evolving. The purpose of this study was to document the concentration range of salivary neuropeptides in healthy controls and in children with cancer, to explore correlations between serum and salivary measurements for Calcitonin Gene-Related Peptide (CGRP) and Vasoactive Intestinal Polypeptide (VIP), and to determine whether there is a change in these salivary neuropeptide levels in response to integrated mind-body therapies. Methods A non-randomized pragmatic study with three phases: Phase 1- Healthy Control Saliva-10 healthy controls provided saliva samples; Phase 2- Cancer Diagnosis Serum-Saliva- 16 mixed-type cancer patients provided blood and saliva samples; Phase 3- Acute Lymphocytic Leukemia (ALL) Saliva Intervention- 12 patients with ALL provided pre- and post-complementary intervention saliva samples. Interventions 20-minutes of structured touch or scripted relaxation breathing were administered to patients in Phase 3; Phase 1 and 2 patients did not receive this intervention. Outcome Measures cortisol, CGRP, VIP, State/Trait Anxiety Scale, visual analogue scale, vital signs. Results Salivary CGRP and VIP were similar for children in Phases 1 and 2. There was a correlation between serum and salivary VIP in the mixed cancer group, though not between serum and salivary CGRP. In Phase 3 children, following a complementary intervention, salivary CGRP, heart rate, and systolic blood pressure decreased. Discussion/Conclusions These data provide evidence of a decrease in sympathetic output after integrative/complementary therapy intervention in children with cancer. The study underscores the potential role of salivary neuropeptides as non-invasive biomarkers for integrated therapies in pediatrics. PMID:26388958

Achieving Integration in Mixed Methods Designs—Principles and Practices

PubMed Central

Fetters, Michael D; Curry, Leslie A; Creswell, John W

2013-01-01

Mixed methods research offers powerful tools for investigating complex processes and systems in health and health care. This article describes integration principles and practices at three levels in mixed methods research and provides illustrative examples. Integration at the study design level occurs through three basic mixed method designs—exploratory sequential, explanatory sequential, and convergent—and through four advanced frameworks—multistage, intervention, case study, and participatory. Integration at the methods level occurs through four approaches. In connecting, one database links to the other through sampling. With building, one database informs the data collection approach of the other. When merging, the two databases are brought together for analysis. With embedding, data collection and analysis link at multiple points. Integration at the interpretation and reporting level occurs through narrative, data transformation, and joint display. The fit of integration describes the extent the qualitative and quantitative findings cohere. Understanding these principles and practices of integration can help health services researchers leverage the strengths of mixed methods. PMID:24279835

Achieving integration in mixed methods designs-principles and practices.

PubMed

Fetters, Michael D; Curry, Leslie A; Creswell, John W

2013-12-01

Mixed methods research offers powerful tools for investigating complex processes and systems in health and health care. This article describes integration principles and practices at three levels in mixed methods research and provides illustrative examples. Integration at the study design level occurs through three basic mixed method designs-exploratory sequential, explanatory sequential, and convergent-and through four advanced frameworks-multistage, intervention, case study, and participatory. Integration at the methods level occurs through four approaches. In connecting, one database links to the other through sampling. With building, one database informs the data collection approach of the other. When merging, the two databases are brought together for analysis. With embedding, data collection and analysis link at multiple points. Integration at the interpretation and reporting level occurs through narrative, data transformation, and joint display. The fit of integration describes the extent the qualitative and quantitative findings cohere. Understanding these principles and practices of integration can help health services researchers leverage the strengths of mixed methods. © Health Research and Educational Trust.

Teaching and Learning in the Mixed-Reality Science Classroom

NASA Astrophysics Data System (ADS)

Tolentino, Lisa; Birchfield, David; Megowan-Romanowicz, Colleen; Johnson-Glenberg, Mina C.; Kelliher, Aisling; Martinez, Christopher

2009-12-01

As emerging technologies become increasingly inexpensive and robust, there is an exciting opportunity to move beyond general purpose computing platforms to realize a new generation of K-12 technology-based learning environments. Mixed-reality technologies integrate real world components with interactive digital media to offer new potential to combine best practices in traditional science learning with the powerful affordances of audio/visual simulations. This paper introduces the realization of a learning environment called SMALLab, the Situated Multimedia Arts Learning Laboratory. We present a recent teaching experiment for high school chemistry students. A mix of qualitative and quantitative research documents the efficacy of this approach for students and teachers. We conclude that mixed-reality learning is viable in mainstream high school classrooms and that students can achieve significant learning gains when this technology is co-designed with educators.

Integrating Quantitative and Qualitative Results in Health Science Mixed Methods Research Through Joint Displays.

PubMed

Guetterman, Timothy C; Fetters, Michael D; Creswell, John W

2015-11-01

Mixed methods research is becoming an important methodology to investigate complex health-related topics, yet the meaningful integration of qualitative and quantitative data remains elusive and needs further development. A promising innovation to facilitate integration is the use of visual joint displays that bring data together visually to draw out new insights. The purpose of this study was to identify exemplar joint displays by analyzing the various types of joint displays being used in published articles. We searched for empirical articles that included joint displays in 3 journals that publish state-of-the-art mixed methods research. We analyzed each of 19 identified joint displays to extract the type of display, mixed methods design, purpose, rationale, qualitative and quantitative data sources, integration approaches, and analytic strategies. Our analysis focused on what each display communicated and its representation of mixed methods analysis. The most prevalent types of joint displays were statistics-by-themes and side-by-side comparisons. Innovative joint displays connected findings to theoretical frameworks or recommendations. Researchers used joint displays for convergent, explanatory sequential, exploratory sequential, and intervention designs. We identified exemplars for each of these designs by analyzing the inferences gained through using the joint display. Exemplars represented mixed methods integration, presented integrated results, and yielded new insights. Joint displays appear to provide a structure to discuss the integrated analysis and assist both researchers and readers in understanding how mixed methods provides new insights. We encourage researchers to use joint displays to integrate and represent mixed methods analysis and discuss their value. © 2015 Annals of Family Medicine, Inc.

Integrating Quantitative and Qualitative Results in Health Science Mixed Methods Research Through Joint Displays

PubMed Central

Guetterman, Timothy C.; Fetters, Michael D.; Creswell, John W.

2015-01-01

PURPOSE Mixed methods research is becoming an important methodology to investigate complex health-related topics, yet the meaningful integration of qualitative and quantitative data remains elusive and needs further development. A promising innovation to facilitate integration is the use of visual joint displays that bring data together visually to draw out new insights. The purpose of this study was to identify exemplar joint displays by analyzing the various types of joint displays being used in published articles. METHODS We searched for empirical articles that included joint displays in 3 journals that publish state-of-the-art mixed methods research. We analyzed each of 19 identified joint displays to extract the type of display, mixed methods design, purpose, rationale, qualitative and quantitative data sources, integration approaches, and analytic strategies. Our analysis focused on what each display communicated and its representation of mixed methods analysis. RESULTS The most prevalent types of joint displays were statistics-by-themes and side-by-side comparisons. Innovative joint displays connected findings to theoretical frameworks or recommendations. Researchers used joint displays for convergent, explanatory sequential, exploratory sequential, and intervention designs. We identified exemplars for each of these designs by analyzing the inferences gained through using the joint display. Exemplars represented mixed methods integration, presented integrated results, and yielded new insights. CONCLUSIONS Joint displays appear to provide a structure to discuss the integrated analysis and assist both researchers and readers in understanding how mixed methods provides new insights. We encourage researchers to use joint displays to integrate and represent mixed methods analysis and discuss their value. PMID:26553895

A Rationale for Mixed Methods (Integrative) Research Programmes in Education

ERIC Educational Resources Information Center

Niaz, Mansoor

2008-01-01

Recent research shows that research programmes (quantitative, qualitative and mixed) in education are not displaced (as suggested by Kuhn) but rather lead to integration. The objective of this study is to present a rationale for mixed methods (integrative) research programs based on contemporary philosophy of science (Lakatos, Giere, Cartwright,…

In-plane microvortices micromixer-based AC electrothermal for testing drug induced death of tumor cells.

PubMed

Lang, Qi; Ren, Yukun; Hobson, Divia; Tao, Ye; Hou, Likai; Jia, Yankai; Hu, Qingming; Liu, Jiangwei; Zhao, Xin; Jiang, Hongyuan

2016-11-01

Herein, we first describe a perfusion chip integrated with an AC electrothermal (ACET) micromixer to supply a uniform drug concentration to tumor cells. The in-plane fluid microvortices for mixing were generated by six pairs of reconstructed novel ACET asymmetric electrodes. To enhance the mixing efficiency, the novel ACET electrodes with rotating angles of 0°, 30°, and 60° were investigated. The asymmetric electrodes with a rotating angle of 60° exhibited the highest mixing efficiency by both simulated and experimental results. The length of the mixing area is 7 mm, and the mixing efficiency is 89.12% (approximate complete mixing) at a voltage of 3 V and a frequency of 500 kHz. The applicability of our micromixer with electrodes rotating at 60° was demonstrated by the drug (tamoxifen) test of human breast cancer cells (MCF-7) for five days, which implies that our ACET in-plane microvortices micromixer has great potential for the application of drug induced rapid death of tumor cells and mixing of biomaterials in organs-on-a-chip systems.

In-plane microvortices micromixer-based AC electrothermal for testing drug induced death of tumor cells

PubMed Central

Lang, Qi; Ren, Yukun; Tao, Ye; Hou, Likai; Jia, Yankai; Hu, Qingming; Liu, Jiangwei; Zhao, Xin; Jiang, Hongyuan

2016-01-01

Herein, we first describe a perfusion chip integrated with an AC electrothermal (ACET) micromixer to supply a uniform drug concentration to tumor cells. The in-plane fluid microvortices for mixing were generated by six pairs of reconstructed novel ACET asymmetric electrodes. To enhance the mixing efficiency, the novel ACET electrodes with rotating angles of 0°, 30°, and 60° were investigated. The asymmetric electrodes with a rotating angle of 60° exhibited the highest mixing efficiency by both simulated and experimental results. The length of the mixing area is 7 mm, and the mixing efficiency is 89.12% (approximate complete mixing) at a voltage of 3 V and a frequency of 500 kHz. The applicability of our micromixer with electrodes rotating at 60° was demonstrated by the drug (tamoxifen) test of human breast cancer cells (MCF-7) for five days, which implies that our ACET in-plane microvortices micromixer has great potential for the application of drug induced rapid death of tumor cells and mixing of biomaterials in organs-on-a-chip systems. PMID:27917250

Phase sensitive amplification in integrated waveguides (Conference Presentation)

NASA Astrophysics Data System (ADS)

Schroeder, Jochen B.; Zhang, Youngbin; Husko, Chad A.; LeFrancois, Simon; Eggleton, Benjamin J.

2017-02-01

Phase sensitive amplification (PSA) is an attractive technology for integrated all-optical signal processing, due to it's potential for noiseless amplification, phase regeneration and generation of squeezed light. In this talk I will review our results on implementing four-wave-mixing based PSA inside integrated photonic devices. In particular I will discuss PSA in chalcogenide ridge waveguides and silicon slow-light photonic crystals. We achieve PSA in both pump- and signal-degenerate schemes with maximum extinction ratios of 11 (silicon) and 18 (chalcogenide) dB. I will further discuss the influence of two-photon absorption and free carrier effects on the performance of silicon-based PSAs.

Long-term mental wellbeing of adolescents and young adults diagnosed with venous thromboembolism: results from a multistage mixed methods study.

PubMed

Højen, A A; Sørensen, E E; Dreyer, P S; Søgaard, M; Larsen, T B

2017-12-01

Essentials Long-term mental wellbeing of adolescents and young adults with venous thromboembolism is unclear. This multistage mixed methods study was based on Danish nationwide registry data and interviews. Mental wellbeing is negatively impacted in the long-term and uncertainty of recurrence is pivotal. The perceived health threat is more important than disease severity for long-term mental wellbeing. Background Critical and chronic illness in youth can lead to impaired mental wellbeing. Venous thromboembolism (VTE) is a potentially traumatic and life-threatening condition. Nonetheless, the long-term mental wellbeing of adolescents and young adults (AYAS) with VTE is unclear. Objectives To investigate the long-term mental wellbeing of AYAS (aged 13-33 years) diagnosed with VTE. Methods We performed a multistage mixed method study based on data from the Danish nationwide health registries, and semistructured interviews with 12 AYAS diagnosed with VTE. An integrated mixed methods interpretation of the findings was conducted through narrative weaving and joint displays. Results The integrated mixed methods interpretation showed that the mental wellbeing of AYAS with VTE had a chronic perspective, with a persistently higher risk of psychotropic drug purchase among AYAS with a first-time diagnosis of VTE than among sex-matched and age-matched population controls and AYAS with a first-time diagnosis of insulin-dependent diabetes mellitus. Impaired mental wellbeing was largely connected to a fear of recurrence and concomitant uncertainty. Therefore, it was important for the long-term mental wellbeing to navigate uncertainty. The perceived health threat played a more profound role in long-term mental wellbeing than disease severity, as the potential life threat was the pivot which pointed back to the initial VTE and forward to the perception of future health threat and the potential risk of dying of a recurrent event. Conclusion Our findings show that the long-term mental wellbeing of AYAS diagnosed with VTE is negatively affected, and highlights these patients' need for adequate support. © 2017 International Society on Thrombosis and Haemostasis.

Integrated printed circuit board device for cell lysis and nucleic acid extraction.

PubMed

Marshall, Lewis A; Wu, Liang Li; Babikian, Sarkis; Bachman, Mark; Santiago, Juan G

2012-11-06

Preparation of raw, untreated biological samples remains a major challenge in microfluidics. We present a novel microfluidic device based on the integration of printed circuit boards and an isotachophoresis assay for sample preparation of nucleic acids from biological samples. The device has integrated resistive heaters and temperature sensors as well as a 70 μm × 300 μm × 3.7 cm microfluidic channel connecting two 15 μL reservoirs. We demonstrated this device by extracting pathogenic nucleic acids from 1 μL dispensed volume of whole blood spiked with Plasmodium falciparum. We dispensed whole blood directly onto an on-chip reservoir, and the system's integrated heaters simultaneously lysed and mixed the sample. We used isotachophoresis to extract the nucleic acids into a secondary buffer via isotachophoresis. We analyzed the convective mixing action with micro particle image velocimetry (micro-PIV) and verified the purity and amount of extracted nucleic acids using off-chip quantitative polymerase chain reaction (PCR). We achieved a clinically relevant limit of detection of 500 parasites per microliter. The system has no moving parts, and the process is potentially compatible with a wide range of on-chip hybridization or amplification assays.

Phenology of mixed woody-herbaceous ecosystems following extreme events: net and differential responses.

PubMed

Rich, Paul M; Breshears, David D; White, Amanda B

2008-02-01

Ecosystem responses to key climate drivers are reflected in phenological dynamics such as the timing and degree of "green-up" that integrate responses over spatial scales from individual plants to ecosystems. This integration is clearest in ecosystems dominated by a single species or life form, such as seasonally dynamic grasslands or more temporally constant evergreen forests. Yet many ecosystems have substantial contribution of cover from both herbaceous and woody evergreen plants. Responses of mixed woody-herbaceous ecosystems to climate are of increasing concern due to their extensive nature, the potential for such systems to yield more complex responses than those dominated by a single life form, and projections that extreme climate and weather events will increase in frequency and intensity with global warming. We present responses of a mixed woody-herbaceous ecosystem type to an extreme event: regional-scale piñon pine mortality following an extended drought and the subsequent herbaceous green-up following the first wet period after the drought. This example highlights how reductions in greenness of the slower, more stable evergreen woody component can rapidly be offset by increases associated with resources made available to the relatively more responsive herbaceous component. We hypothesize that such two-phase phenological responses to extreme events are characteristic of many mixed woody-herbaceous ecosystems.

Capability of Integrated MODIS Imagery and ALOS for Oil Palm, Rubber and Forest Areas Mapping in Tropical Forest Regions

PubMed Central

Razali, Sheriza Mohd; Marin, Arnaldo; Nuruddin, Ahmad Ainuddin; Shafri, Helmi Zulhaidi Mohd; Hamid, Hazandy Abdul

2014-01-01

Various classification methods have been applied for low resolution of the entire Earth's surface from recorded satellite images, but insufficient study has determined which method, for which satellite data, is economically viable for tropical forest land use mapping. This study employed Iterative Self Organizing Data Analysis Techniques (ISODATA) and K-Means classification techniques to classified Moderate Resolution Imaging Spectroradiometer (MODIS) Surface Reflectance satellite image into forests, oil palm groves, rubber plantations, mixed horticulture, mixed oil palm and rubber and mixed forest and rubber. Even though frequent cloud cover has been a challenge for mapping tropical forests, our MODIS land use classification map found that 2008 ISODATA-1 performed well with overall accuracy of 94%, with the highest Producer's Accuracy of Forest with 86%, and were consistent with MODIS Land Cover 2008 (MOD12Q1), respectively. The MODIS land use classification was able to distinguish young oil palm groves from open areas, rubber and mature oil palm plantations, on the Advanced Land Observing Satellite (ALOS) map, whereas rubber was more easily distinguished from an open area than from mixed rubber and forest. This study provides insight on the potential for integrating regional databases and temporal MODIS data, in order to map land use in tropical forest regions. PMID:24811079

Capability of integrated MODIS imagery and ALOS for oil palm, rubber and forest areas mapping in tropical forest regions.

PubMed

Razali, Sheriza Mohd; Marin, Arnaldo; Nuruddin, Ahmad Ainuddin; Shafri, Helmi Zulhaidi Mohd; Hamid, Hazandy Abdul

2014-05-07

Various classification methods have been applied for low resolution of the entire Earth's surface from recorded satellite images, but insufficient study has determined which method, for which satellite data, is economically viable for tropical forest land use mapping. This study employed Iterative Self Organizing Data Analysis Techniques (ISODATA) and K-Means classification techniques to classified Moderate Resolution Imaging Spectroradiometer (MODIS) Surface Reflectance satellite image into forests, oil palm groves, rubber plantations, mixed horticulture, mixed oil palm and rubber and mixed forest and rubber. Even though frequent cloud cover has been a challenge for mapping tropical forests, our MODIS land use classification map found that 2008 ISODATA-1 performed well with overall accuracy of 94%, with the highest Producer's Accuracy of Forest with 86%, and were consistent with MODIS Land Cover 2008 (MOD12Q1), respectively. The MODIS land use classification was able to distinguish young oil palm groves from open areas, rubber and mature oil palm plantations, on the Advanced Land Observing Satellite (ALOS) map, whereas rubber was more easily distinguished from an open area than from mixed rubber and forest. This study provides insight on the potential for integrating regional databases and temporal MODIS data, in order to map land use in tropical forest regions.

On the solution of integral equations with a generalized Cauchy kernel

NASA Technical Reports Server (NTRS)

Kaya, A. C.; Erdogan, F.

1987-01-01

A numerical technique is developed analytically to solve a class of singular integral equations occurring in mixed boundary-value problems for nonhomogeneous elastic media with discontinuities. The approach of Kaya and Erdogan (1987) is extended to treat equations with generalized Cauchy kernels, reformulating the boundary-value problems in terms of potentials as the unknown functions. The numerical implementation of the solution is discussed, and results for an epoxy-Al plate with a crack terminating at the interface and loading normal to the crack are presented in tables.

Mixed-methods research in pharmacy practice: basics and beyond (part 1).

PubMed

Hadi, Muhammad Abdul; Alldred, David Phillip; Closs, S José; Briggs, Michelle

2013-10-01

This is the first of two papers which explore the use of mixed-methods research in pharmacy practice. In an era of evidence-based medicine and policy, high-quality research evidence is essential for the development of effective pharmacist-led services. Over the past decade, the use of mixed-methods research has become increasingly common in healthcare, although to date its use has been relatively limited in pharmacy practice research. In this article, the basic concepts of mixed-methods research including its definition, typologies and advantages in relation to pharmacy practice research are discussed. Mixed-methods research brings together qualitative and quantitative methodologies within a single study to answer or understand a research problem. There are a number of mixed-methods designs available, but the selection of an appropriate design must always be dictated by the research question. Importantly, mixed-methods research should not be seen as a 'tool' to collect qualitative and quantitative data, rather there should be some degree of 'integration' between the two data sets. If conducted appropriately, mixed-methods research has the potential to generate quality research evidence by combining strengths and overcoming the respective limitations of qualitative and quantitative methodologies. © 2012 Royal Pharmaceutical Society.

An equivalent domain integral for analysis of two-dimensional mixed mode problems

NASA Technical Reports Server (NTRS)

Raju, I. S.; Shivakumar, K. N.

1989-01-01

An equivalent domain integral (EDI) method for calculating J-integrals for two-dimensional cracked elastic bodies subjected to mixed mode loading is presented. The total and product integrals consist of the sum of an area or domain integral and line integrals on the crack faces. The EDI method gave accurate values of the J-integrals for two mode I and two mixed mode problems. Numerical studies showed that domains consisting of one layer of elements are sufficient to obtain accurate J-integral values. Two procedures for separating the individual modes from the domain integrals are presented. The procedure that uses the symmetric and antisymmetric components of the stress and displacement fields to calculate the individual modes gave accurate values of the integrals for all the problems analyzed.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mayberry, J.; Stelle, S.; O`Brien, M.

The Mixed Waste Integrated Program Logic Diagram was developed to provide technical alternative for mixed wastes projects for the Office of Technology Development`s Mixed Waste Integrated Program (MWIP). Technical solutions in the areas of characterization, treatment, and disposal were matched to a select number of US Department of Energy (DOE) treatability groups represented by waste streams found in the Mixed Waste Inventory Report (MWIR).

A Case Study of a Mixed Methods Study Engaged in Integrated Data Analysis

ERIC Educational Resources Information Center

Schiazza, Daniela Marie

2013-01-01

The nascent field of mixed methods research has yet to develop a cohesive framework of guidelines and procedures for mixed methods data analysis (Greene, 2008). To support the field's development of analytical frameworks, this case study reflects on the development and implementation of a mixed methods study engaged in integrated data analysis.…

Integration of polarization-multiplexing and phase-shifting in nanometric two dimensional self-mixing measurement.

PubMed

Tao, Yufeng; Xia, Wei; Wang, Ming; Guo, Dongmei; Hao, Hui

2017-02-06

Integration of phase manipulation and polarization multiplexing was introduced to self-mixing interferometry (SMI) for high-sensitive measurement. Light polarizations were used to increase measuring path number and predict manifold merits for potential applications. Laser source was studied as a microwave-photonic resonator optically-injected by double reflected lights on a two-feedback-factor analytical model. Independent external paths exploited magnesium-oxide doped lithium niobate crystals at perpendicular polarizations to transfer interferometric phases into amplitudes of harmonics. Theoretical resolutions reached angstrom level. By integrating two techniques, this SMI outperformed the conventional single-path SMIs by simultaneous dual-targets measurement on single laser tube with high sensitivity and low speckle noise. In experimental demonstration, by nonlinear filtering method, a custom-made phase-resolved algorithm real-time figured out instantaneous two-dimensional displacements with nanometer resolution. Experimental comparisons to lock-in technique and a commercial Ploytec-5000 laser Doppler velocity meter validated this two-path SMI in micron range without optical cross-talk. Moreover, accuracy subjected to slewing rates of crystals could be flexibly adjusted.

Model simulations of dense bottom currents in the Western Baltic Sea

NASA Astrophysics Data System (ADS)

Burchard, Hans; Janssen, Frank; Bolding, Karsten; Umlauf, Lars; Rennau, Hannes

2009-01-01

Only recently, medium intensity inflow events into the Baltic Sea have gained more awareness because of their potential to ventilate intermediate layers in the Southern Baltic Sea basins. With the present high-resolution model study of the Western Baltic Sea a first attempt is made to obtain model based realistic estimates of turbulent mixing in this area where dense bottom currents resulting from medium intensity inflow events are weakened by turbulent entrainment. The numerical model simulation which is carried out using the General Estuarine Transport Model (GETM) during nine months in 2003 and 2004 is first validated by means of three automatic stations at the Drogden and Darss Sills and in the Arkona Sea. In order to obtain good agreement between observations and model results, the 0.5×0.5 nautical mile bathymetry had to be adjusted in order to account for the fact that even at that scale many relevant topographic features are not resolved. Current velocity, salinity and turbulence observations during a medium intensity inflow event through the Øresund are then compared to the model results. Given the general problems of point to point comparisons between observations and model simulations, the agreement is fairly good with the characteristic features of the inflow event well represented by the model simulations. Two different bulk measures for mixing activity are then introduced, the vertically integrated decay of salinity variance, which is equal to the production of micro-scale salinity variance, and the vertically integrated turbulent salt flux, which is related to an increase of potential energy due to vertical mixing of stably stratified flow. Both measures give qualitatively similar results and identify the Drogden and Darss Sills as well as the Bornholm Channel as mixing hot spots. Further regions of strong mixing are the dense bottom current pathways from these sills into the Arkona Sea, areas around Kriegers Flak (a shoal in the western Arkona Sea) and north-west of the island of Rügen.

Alumni Matter: Unleashing a Lifetime of Value. The Benefit of CRM Principals in the Postsecondary Environment

ERIC Educational Resources Information Center

Bedigian, Betsy

2006-01-01

In a recent survey of continuing and professional education leaders, the University Continuing Education Association (UCEA) reported that marketing budgets are steadily rising with institutions spending an average of $319 million on an integrated marketing mix that targets would-be students. What the numbers do not tell is the potential benefit of…

A first-order Green's function approach to supersonic oscillatory flow: A mixed analytic and numeric treatment

NASA Technical Reports Server (NTRS)

Freedman, M. I.; Sipcic, S.; Tseng, K.

1985-01-01

A frequency domain Green's Function Method for unsteady supersonic potential flow around complex aircraft configurations is presented. The focus is on the supersonic range wherein the linear potential flow assumption is valid. In this range the effects of the nonlinear terms in the unsteady supersonic compressible velocity potential equation are negligible and therefore these terms will be omitted. The Green's function method is employed in order to convert the potential flow differential equation into an integral one. This integral equation is then discretized, through standard finite element technique, to yield a linear algebraic system of equations relating the unknown potential to its prescribed co-normalwash (boundary condition) on the surface of the aircraft. The arbitrary complex aircraft configuration (e.g., finite-thickness wing, wing-body-tail) is discretized into hyperboloidal (twisted quadrilateral) panels. The potential and co-normalwash are assumed to vary linearly within each panel. The long range goal is to develop a comprehensive theory for unsteady supersonic potential aerodynamic which is capable of yielding accurate results even in the low supersonic (i.e., high transonic) range.

The Specificity of Observational Studies in Physical Activity and Sports Sciences: Moving Forward in Mixed Methods Research and Proposals for Achieving Quantitative and Qualitative Symmetry.

PubMed

Anguera, M Teresa; Camerino, Oleguer; Castañer, Marta; Sánchez-Algarra, Pedro; Onwuegbuzie, Anthony J

2017-01-01

Mixed methods studies are been increasingly applied to a diversity of fields. In this paper, we discuss the growing use-and enormous potential-of mixed methods research in the field of sport and physical activity. A second aim is to contribute to strengthening the characteristics of mixed methods research by showing how systematic observation offers rigor within a flexible framework that can be applied to a wide range of situations. Observational methodology is characterized by high scientific rigor and flexibility throughout its different stages and allows the objective study of spontaneous behavior in natural settings, with no external influence. Mixed methods researchers need to take bold yet thoughtful decisions regarding both substantive and procedural issues. We present three fundamental and complementary ideas to guide researchers in this respect: we show why studies of sport and physical activity that use a mixed methods research approach should be included in the field of mixed methods research, we highlight the numerous possibilities offered by observational methodology in this field through the transformation of descriptive data into quantifiable code matrices, and we discuss possible solutions for achieving true integration of qualitative and quantitative findings.

Transport of contaminants in the planetary boundary layer

NASA Technical Reports Server (NTRS)

Lee, I. Y.; Swan, P. R.

1978-01-01

A planetary boundary layer model is described and used to simulate PBL phenomena including cloud formation and pollution transport in the San Francisco Bay Area. The effect of events in the PBL on air pollution is considered, and governing equations for the average momentum, potential temperature, water vapor mixing ratio, and air contaminants are presented. These equations are derived by integrating the basic equations vertically through the mixed layer. Characteristics of the day selected for simulation are reported, and the results suggest that the diurnally cyclic features of the mesoscale motion, including clouds and air pollution, can be simulated in a readily interpretable way with the model.

Using mixed methods for evaluating an integrative approach to cancer care: a case study.

PubMed

Brazier, Alison; Cooke, Karen; Moravan, Veronika

2008-03-01

To evaluate the impact of participating in an integrative cancer care program at the Centre for Integrated Healing in Vancouver, British Columbia, on patients' lifestyle, quality of life, and overall well-being. A mixed-methods case study with a pre- and posttest design. No control group was utilized. All new patients starting at the Centre for Integrated Healing between May and September of 2004 were invited to join the study. Forty-six of 77 new patients agreed to participate. Quantitative data measuring quality of life, social support, anxiety and depression, locus of control, and hope were assessed at baseline (pre-program start) and at 6 weeks and 5 months from the start of the program. Qualitative data in the form of focus groups and interviews were collected midway through the follow-up period to further explore program impacts. No statistically significant improvements or declines were noted on the quantitative measures between baseline and the 5-month follow-up point. The qualitative findings revealed a theme of patients' active engagement in their cancer care involving empowered decision making and creating personal change. Facilitators of active patient engagement in their own care from the integrative program included healing partnerships with practitioners, information and resources, managing the integration of complementary and conventional therapies, emotional support, and a sense of hope. This case study was a first attempt at documenting the impact of an integrative cancer care program at the Centre for Integrated Healing. Study limitations included a small sample size, which limited power to detect quantitative changes on the questionnaires and a lack of a control group. Qualitative findings indicated that patients found value in the "person-oriented" holistic approach to care, which encouraged patients to take an active role in decision making and self-care. The use of a mixed-methods research design proved to be an effective approach to not only evaluating outcomes but also examining process issues of the experience. Additional research is greatly needed to better understand potential impacts of integrative approaches to cancer care.

Oxidation and adduct formation of xenobiotics in a microfluidic electrochemical cell with boron doped diamond electrodes and an integrated passive gradient rotation mixer.

PubMed

van den Brink, Floris T G; Wigger, Tina; Ma, Liwei; Odijk, Mathieu; Olthuis, Wouter; Karst, Uwe; van den Berg, Albert

2016-10-05

Reactive xenobiotic metabolites and their adduct formation with biomolecules such as proteins are important to study as they can be detrimental to human health. Here, we present a microfluidic electrochemical cell with integrated micromixer to study phase I and phase II metabolism as well as protein adduct formation of xenobiotics in a purely instrumental approach. The newly developed microfluidic device enables both the generation of reactive metabolites through electrochemical oxidation and subsequent adduct formation with biomolecules in a chemical microreactor. This allows us to study the detoxification of reactive species with glutathione and to predict potential toxicity of xenobiotics as a result of protein modification. Efficient mixing in microfluidic systems is a slow process due to the typically laminar flow conditions in shallow channels. Therefore, a passive gradient rotation micromixer has been designed that is capable of mixing liquids efficiently in a 790 pL volume within tens of milliseconds. The mixing principle relies on turning the concentration gradient that is initially established by bringing together two streams of liquid, to take advantage of the short diffusion distances in the shallow microchannels of thin-layer flow cells. The mixer is located immediately downstream of the working electrode of an electrochemical cell with integrated boron doped diamond electrodes. In conjunction with mass spectrometry, the two microreactors integrated in a single device provide a powerful tool to study the metabolism and toxicity of xenobiotics, which was demonstrated by the investigation of the model compound 1-hydroxypyrene.

Solution of the nonlinear mixed Volterra-Fredholm integral equations by hybrid of block-pulse functions and Bernoulli polynomials.

PubMed

Mashayekhi, S; Razzaghi, M; Tripak, O

2014-01-01

A new numerical method for solving the nonlinear mixed Volterra-Fredholm integral equations is presented. This method is based upon hybrid functions approximation. The properties of hybrid functions consisting of block-pulse functions and Bernoulli polynomials are presented. The operational matrices of integration and product are given. These matrices are then utilized to reduce the nonlinear mixed Volterra-Fredholm integral equations to the solution of algebraic equations. Illustrative examples are included to demonstrate the validity and applicability of the technique.

Solution of the Nonlinear Mixed Volterra-Fredholm Integral Equations by Hybrid of Block-Pulse Functions and Bernoulli Polynomials

PubMed Central

Mashayekhi, S.; Razzaghi, M.; Tripak, O.

2014-01-01

A new numerical method for solving the nonlinear mixed Volterra-Fredholm integral equations is presented. This method is based upon hybrid functions approximation. The properties of hybrid functions consisting of block-pulse functions and Bernoulli polynomials are presented. The operational matrices of integration and product are given. These matrices are then utilized to reduce the nonlinear mixed Volterra-Fredholm integral equations to the solution of algebraic equations. Illustrative examples are included to demonstrate the validity and applicability of the technique. PMID:24523638

The Spacing of Strongly Meandering Jets in Quasigeostrophic Turbulence

NASA Astrophysics Data System (ADS)

Scott, R.

2017-12-01

Based on an assumption of inhomogeneous potential vorticity mixing,estimates are obtained for kinetic and potential energies inquasigeostrophic β -plane turbulence with strongly meanderingjets and in the limit of small Rossby deformation length. Theestimates provide, inter alia, a means to predict the jetspacing based on knowledge of either the kinetic or potential energy,which, in situations where the flow is forced with a uniform totalenergy input, are known a priori in the case of frictional orthermal damping, respectively. The estimates are lower bounds for thejet spacing, achieved in the limit of perfect mixing between regularlyspaced jets with simple meanders. These lower bounds are sharp in astrict mathematical sense but are likely to substantiallyunderestimate jet spacing in actual flows, which exhibit a remarkablediversity of structures and irregularities. The latter areillustrated numerically in direct integrations of the forced system.A convenient description of the forced system is presented in terms ofa number of independent length scales of the problem, anddimensionless ratios of these.

Discrete conservation properties for shallow water flows using mixed mimetic spectral elements

NASA Astrophysics Data System (ADS)

Lee, D.; Palha, A.; Gerritsma, M.

2018-03-01

A mixed mimetic spectral element method is applied to solve the rotating shallow water equations. The mixed method uses the recently developed spectral element histopolation functions, which exactly satisfy the fundamental theorem of calculus with respect to the standard Lagrange basis functions in one dimension. These are used to construct tensor product solution spaces which satisfy the generalized Stokes theorem, as well as the annihilation of the gradient operator by the curl and the curl by the divergence. This allows for the exact conservation of first order moments (mass, vorticity), as well as higher moments (energy, potential enstrophy), subject to the truncation error of the time stepping scheme. The continuity equation is solved in the strong form, such that mass conservation holds point wise, while the momentum equation is solved in the weak form such that vorticity is globally conserved. While mass, vorticity and energy conservation hold for any quadrature rule, potential enstrophy conservation is dependent on exact spatial integration. The method possesses a weak form statement of geostrophic balance due to the compatible nature of the solution spaces and arbitrarily high order spatial error convergence.

Design a freeform microlens array module for any arbitrary-shape collimated beam shaping and color mixing

NASA Astrophysics Data System (ADS)

Chen, Enguo; Wu, Rengmao; Guo, Tailiang

2014-06-01

Collimated beam shaping with freeform surface usually employs a predefined mapping to tailor one or multiple freeform surfaces. Limitation on those designs is that the source, the freeform optics and the target are in fixed one-to-one correspondence with each other. To overcome this drawback, this paper presents a kind of freeform microlens array module integrated with an ultra-thin freeform microlens array and a condenser lens to reshape any arbitrary-shape collimated beam into a prescribed uniform rectangular illumination and achieve color mixing. The design theory is explicitly given, and some key issues are addressed. Several different application examples are given, and the target is obtained with high uniformity and energy efficiency. This freeform microlens array module, which shows better flexibility and practicality than the regular designs, can be used not only to reshape any arbitrary-shape collimated beam (or a collimated beam integrated with several sub-collimated beams), but also most importantly to achieve color mixing. With excellent optical performance and ultra-compact volume, this optical module together with the design theory can be further introduced into other applications and will have a huge market potential in the near future.

Combined Microfluidic-Eectric Diffused Mixing of Living Cells in Continuous Flow

NASA Astrophysics Data System (ADS)

Ming-Wen Wang,

2010-02-01

The mixing process is a crucially important stage in the operation of biological and chemical microfluidic devices. If the mixing is inadequate, reactants do not fully interact with each other, and the device may not operate properly. This paper describes a simplified microfluidic mixer (different from a chaotic mixer) which can uniformly mix a buffer solution with living cells by applying an AC electric charge. Diffusion of the living cells into the buffer solution occurs rapidly following the interface of the flow stream with the electric charge; no further agitating step is needed. To accomplish this, an asymmetric pair of electrodes was integrated at the inlets of the buffer solution and the cells fluid. When the buffer solution and the cells fluid were introduced into one flow path, they remained limited to that flow stream. When the electrodes were charged, however, the cells in a short distance were efficiently moved into the solution flow, and the original fluids were mixed. The mixing efficiency depends on the polarizability of the cells, and this in turn is governed by the dielectric properties of the cells, the medium, and the solvent. This micro device, capable of efficiently mixing living cells with a buffer solution, may potentially allow biological mixing to be done outside of hospitals, in facilities without biological analyzing instruments.

Performance analysis of a microfluidic mixer based on high gradient magnetic separation principles

NASA Astrophysics Data System (ADS)

Liu, Mengyu; Han, Xiaotao; Cao, Quanliang; Li, Liang

2017-09-01

To achieve a rapid mixing between a water-based ferrofluid and DI water in a microfluidic environment, a magnetically actuated mixing system based on high gradient magnetic separation principles is proposed in this work. The microfluidic system consists of a T-shaped mirochannel and an array of integrated soft-magnetic elements at the sidewall of the channel. With the aid of an external magnetic bias field, these elements are magnetized to produce a magnetic volume force acting on the fluids containing magnetic nanoparticles, and then to induce additional flows for improving the mixing performance. The mixing process is numerically investigated through analyzing the concentration distribution of magnetic nanoparticles using a coupled particle-fluid transport model, and mixing performances under different parametrical conditions are investigated in detail. Numerical results show that a high mixing efficiency around 97.5% can be achieved within 2 s under an inlet flow rate of 1 mm s-1 and a relatively low magnetic bias field of 50 mT. Meanwhile, it has been found that there is an optimum number of magnetic elements used for obtaining the best mixing performance. These results show the potential of the proposed mixing method in lab-on-a-chip system and could be helpful in designing and optimizing system performance.

Technology Use as a Support Tool by Secondary Students with Autism: A Mixed Methods Investigation

ERIC Educational Resources Information Center

Hedges, Susan H.

2016-01-01

The majority of students with Autism Spectrum Disorder (ASD) are leaving high school ill prepared to integrate successfully into adult life, which comes at a huge cost, not only to themselves and to their families, but also to society at large. Technology supports have the potential to improve their outcomes and thus enhance their quality of life.…

Assessing the Link between Stress and Retention and the Existence of Barriers to Support Service Use within HE

ERIC Educational Resources Information Center

Harris, P. J.; Campbell Casey, S. A.; Westbury, T.; Florida-James, G.

2016-01-01

Students suffer from stress as a result of many factors, including educational unpreparedness, financial strain and inability to integrate socially. This mixed methods study aimed to investigate stress levels of undergraduate students in a post-1992, Scottish university and the potential for measures of stress to act as an indicator of a student's…

In One Voice: Aspiring and Practicing School Leaders Embrace the Need for a More Integrated Approach to Leadership Preparation and Development

ERIC Educational Resources Information Center

Drago-Severson, Eleanor; Maslin-Ostrowski, Patricia; Hoffman, Alexander M.

2013-01-01

This article examines the views of graduate students who are aspiring or practicing school leaders and faculty from two university degree granting leadership preparation programs. Drawn from a larger mixed methods study, the authors focus here on survey results that show how these groups rated the effectiveness of 14 potential curricular…

Mixed methods research in music therapy research.

PubMed

Bradt, Joke; Burns, Debra S; Creswell, John W

2013-01-01

Music therapists have an ethical and professional responsibility to provide the highest quality care possible to their patients. Much of the time, high quality care is guided by evidence-based practice standards that integrate the most current, available research in making decisions. Accordingly, music therapists need research that integrates multiple ways of knowing and forms of evidence. Mixed methods research holds great promise for facilitating such integration. At this time, there have not been any methodological articles published on mixed methods research in music therapy. The purpose of this article is to introduce mixed methods research as an approach to address research questions relevant to music therapy practice. This article describes the core characteristics of mixed methods research, considers paradigmatic issues related to this research approach, articulates major challenges in conducting mixed methods research, illustrates four basic designs, and provides criteria for evaluating the quality of mixed methods articles using examples of mixed methods research from the music therapy literature. Mixed methods research offers unique opportunities for strengthening the evidence base in music therapy. Recommendations are provided to ensure rigorous implementation of this research approach.

Advancing the study of violence against women using mixed methods: integrating qualitative methods into a quantitative research program.

PubMed

Testa, Maria; Livingston, Jennifer A; VanZile-Tamsen, Carol

2011-02-01

A mixed methods approach, combining quantitative with qualitative data methods and analysis, offers a promising means of advancing the study of violence. Integrating semi-structured interviews and qualitative analysis into a quantitative program of research on women's sexual victimization has resulted in valuable scientific insight and generation of novel hypotheses for testing. This mixed methods approach is described and recommendations for integrating qualitative data into quantitative research are provided.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buck, Edgar C.; Wittman, Richard S.

The U.S. Department of Energy Office of Nuclear Energy (DOE-NE), Office of Fuel Cycle Technology has established the Used Fuel Disposition Campaign (UFDC) to conduct the research and development activities related to storage, transportation, and disposal of used nuclear fuel (UNF) and high-level radioactive waste. Within the UFDC, the components for a general system model of the degradation and subsequent transport of UNF is being developed to analyze the performance of disposal options [Sassani et al., 2012]. Two model components of the near-field part of the problem are the ANL Mixed Potential Model and the PNNL Radiolysis Model. This reportmore » is in response to the desire to integrate the two models as outlined in [Buck, E.C, J.L. Jerden, W.L. Ebert, R.S. Wittman, (2013) “Coupling the Mixed Potential and Radiolysis Models for Used Fuel Degradation,” FCRD-UFD-2013-000290, M3FT-PN0806058]« less

Mixed reality virtual pets to reduce childhood obesity.

PubMed

Johnsen, Kyle; Ahn, Sun Joo; Moore, James; Brown, Scott; Robertson, Thomas P; Marable, Amanda; Basu, Aryabrata

2014-04-01

Novel approaches are needed to reduce the high rates of childhood obesity in the developed world. While multifactorial in cause, a major factor is an increasingly sedentary lifestyle of children. Our research shows that a mixed reality system that is of interest to children can be a powerful motivator of healthy activity. We designed and constructed a mixed reality system that allowed children to exercise, play with, and train a virtual pet using their own physical activity as input. The health, happiness, and intelligence of each virtual pet grew as its associated child owner exercised more, reached goals, and interacted with their pet. We report results of a research study involving 61 children from a local summer camp that shows a large increase in recorded and observed activity, alongside observational evidence that the virtual pet was responsible for that change. These results, and the ease at which the system integrated into the camp environment, demonstrate the practical potential to impact the exercise behaviors of children with mixed reality.

Inertial focusing and passive micro-mixing techniques for rare cells capturing microfluidic platform

NASA Astrophysics Data System (ADS)

Phadke, Manisha; Shaner, Sebastian; Shah, Shreyas; Rodriguez, Ygnacio; Wibowo, Denni; Whulanza, Yudan; Teriete, Peter; Allen, Jeff; Kassegne, Sam

2018-02-01

Isolation and capture of rare cells continues to be a daunting task that is still looking for an innovative and efficient method. While a variety of approaches have been suggested over the past several years, immunocapturing in a microfluidic platform carries a substantial promise as shown by recent published works. In this paper, we introduced a combination of inertial focusing and passive micro-mixing through 3D chevron-type features in a microchannel to induce chaotic mixing within antibody-coated microchannels and, ultimately, promote rare cell capture. The device introduced in this work contains curved microchannels that consist of a series of staggered chevron grooves. The curved channels enable inertial focusing while the chevron grooves allow for chaotic mixing. The microfluidics platform microfabricated through soft lithography has a polydimethylsiloxane (PDMS) foundation and was thinly coated with an alginate hydrogel derivatized with streptavidin. We submitted that our qualitative and quantitative results demonstrated the potentials in advancements in rare cell isolation through this integration of two techniques.

ADVANCING THE STUDY OF VIOLENCE AGAINST WOMEN USING MIXED METHODS: INTEGRATING QUALITATIVE METHODS INTO A QUANTITATIVE RESEARCH PROGRAM

PubMed Central

Testa, Maria; Livingston, Jennifer A.; VanZile-Tamsen, Carol

2011-01-01

A mixed methods approach, combining quantitative with qualitative data methods and analysis, offers a promising means of advancing the study of violence. Integrating semi-structured interviews and qualitative analysis into a quantitative program of research on women’s sexual victimization has resulted in valuable scientific insight and generation of novel hypotheses for testing. This mixed methods approach is described and recommendations for integrating qualitative data into quantitative research are provided. PMID:21307032

Optimization and translation of MSC-based hyaluronic acid hydrogels for cartilage repair

NASA Astrophysics Data System (ADS)

Erickson, Isaac E.

2011-12-01

Traumatic injury and disease disrupt the ability of cartilage to carry joint stresses and, without an innate regenerative response, often lead to degenerative changes towards the premature development of osteoarthritis. Surgical interventions have yet to restore long-term mechanical function. Towards this end, tissue engineering has been explored for the de novo formation of engineered cartilage as a biologic approach to cartilage repair. Research utilizing autologous chondrocytes has been promising, but clinical limitations in their yield have motivated research into the potential of mesenchymal stem cells (MSCs) as an alternative cell source. MSCs are multipotent cells that can differentiate towards a chondrocyte phenotype in a number of biomaterials, but no combination has successfully recapitulated the native mechanical function of healthy articular cartilage. The broad objective of this thesis was to establish an MSC-based tissue engineering approach worthy of clinical translation. Hydrogels are a common class of biomaterial used for cartilage tissue engineering and our initial work demonstrated the potential of a photo-polymerizable hyaluronic acid (HA) hydrogel to promote MSC chondrogenesis and improved construct maturation by optimizing macromer and MSC seeding density. The beneficial effects of dynamic compressive loading, high MSC density, and continuous mixing (orbital shaker) resulted in equilibrium modulus values over 1 MPa, well in range of native tissue. While compressive properties are crucial, clinical translation also demands that constructs stably integrate within a defect. We utilized a push-out testing modality to assess the in vitro integration of HA constructs within artificial cartilage defects. We established the necessity for in vitro pre-maturation of constructs before repair to achieve greater integration strength and compressive properties in situ. Combining high MSC density and gentle mixing resulted in integration strength over 500 kPa, nearly 10-fold greater than previous reports of integration with MSC-based constructs. Furthermore, we demonstrated the durability of this repair system by applying dynamic loading and showed its functional contribution to the distribution of compressive loads across the repair space. Overall, the studies contained within this thesis offer the first MSC-based tissue engineering strategy that successfully recapitulates native mechanical function while also demonstrating the potential for complete functional cartilage repair.

Integral use of sugarcane vinasse for biomass production of actinobacteria: Potential application in soil remediation.

PubMed

Aparicio, Juan D; Benimeli, Claudia S; Almeida, César A; Polti, Marta A; Colin, Verónica L

2017-08-01

The use of living actinobacteria biomass to clean up contaminated soils is an attractive biotechnology approach. However, biomass generation from cheap feedstock is the first step to ensure process sustainability. The present work reports the ability of four actinobacteria, Streptomyces sp. M7, MC1, A5, and Amycolatopsis tucumanensis, to generate biomass from sugarcane vinasse. Optimal vinasse concentration to obtain the required biomass (more than 0.4 g L -1 ) was 20% for all strains, either grown individually or as mixed cultures. However, the biomass fraction recovered from first vinasse was discarded as it retained trace metals present in the effluent. Fractions recovered from three consecutive cycles of vinasse re-use obtained by mixing equal amounts of biomass from single cultures or produced as a mixed culture were evaluated to clean up contaminated soil with lindane and chromium. In all cases, the decrease in pesticide was about 50% after 14 d of incubation. However, chromium removal was statistically different depending on the preparation methodology of the inoculum. While the combined actinobacteria biomass recovered from their respective single cultures removed about 85% of the chromium, the mixed culture biomass removed more than 95%. At the end of the reused vinasse cycle, the mixed culture removed more than 70% of the biological oxygen demand suggesting a proportional reduction in the effluent toxicity. These results represent the first integral approach to address a problematic of multiple contaminations, concerning pesticides, heavy metals and a regionally important effluent like vinasse. Copyright © 2017 Elsevier Ltd. All rights reserved.

Optimal Solar PV Arrays Integration for Distributed Generation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Omitaomu, Olufemi A; Li, Xueping

2012-01-01

Solar photovoltaic (PV) systems hold great potential for distributed energy generation by installing PV panels on rooftops of residential and commercial buildings. Yet challenges arise along with the variability and non-dispatchability of the PV systems that affect the stability of the grid and the economics of the PV system. This paper investigates the integration of PV arrays for distributed generation applications by identifying a combination of buildings that will maximize solar energy output and minimize system variability. Particularly, we propose mean-variance optimization models to choose suitable rooftops for PV integration based on Markowitz mean-variance portfolio selection model. We further introducemore » quantity and cardinality constraints to result in a mixed integer quadratic programming problem. Case studies based on real data are presented. An efficient frontier is obtained for sample data that allows decision makers to choose a desired solar energy generation level with a comfortable variability tolerance level. Sensitivity analysis is conducted to show the tradeoffs between solar PV energy generation potential and variability.« less

Deconstructing the complexity of substance use among young men who have sex with men (YMSM) by optimizing the role of qualitative strategies in a mixed methods study.

PubMed

Kubicek, Katrina; Weiss, George; Iverson, Ellen F; Kipke, Michele D

2010-04-01

Qualitative data can be a powerful tool in developing interventions for substance use and other HIV-risk behaviors. Mixed methods design offers researchers the ability to obtain data that provides both breadth and depth to their research questions. However, the integration of qualitative data in mixed methods research has been limited. This paper describes the qualitative study design of the Healthy Young Men's Study, a longitudinal mixed method study with an ethnically diverse cohort of young men who have sex with men (YMSM) (N = 526) in Los Angeles. Integral to this discussion is how a mixed methods study can address common challenges such as sampling, representation and integration of both datasets.

Deconstructing the complexity of substance use among young men who have sex with men (YMSM) by optimizing the role of qualitative strategies in a mixed methods study

PubMed Central

Kubicek, Katrina; Weiss, George; Iverson, Ellen F.; Kipke, Michele D.

2010-01-01

Qualitative data can be a powerful tool in developing interventions for substance use and other HIV-risk behaviors. Mixed-methods design offers researchers the ability to obtain data that provides both breadth and depth to their research. However, the integration of qualitative data in mixed-methods research has been limited. This paper describes the qualitative design of the Healthy Young Men’s Study, a longitudinal mixed-method study with an ethnically diverse cohort of young men who have sex with men (YMSM) (N=526) in Los Angeles. Integral to this discussion is how a mixed-methods study can address common challenges such as sampling, representation and integration. PMID:20222783

On the solution of integral equations with a generalized cauchy kernal

NASA Technical Reports Server (NTRS)

Kaya, A. C.; Erdogan, F.

1986-01-01

A certain class of singular integral equations that may arise from the mixed boundary value problems in nonhonogeneous materials is considered. The distinguishing feature of these equations is that in addition to the Cauchy singularity, the kernels contain terms that are singular only at the end points. In the form of the singular integral equations adopted, the density function is a potential or a displacement and consequently the kernal has strong singularities of the form (t-x)(-2), x(n-2) (t+x)(n), (n is = or 2, 0 x, t b). The complex function theory is used to determine the fundamental function of the problem for the general case and a simple numerical technique is described to solve the integral equation. Two examples from the theory of elasticity are then considered to show the application of the technique.

High-Voltage-Input Level Translator Using Standard CMOS

NASA Technical Reports Server (NTRS)

Yager, Jeremy A.; Mojarradi, Mohammad M.; Vo, Tuan A.; Blalock, Benjamin J.

2011-01-01

proposed integrated circuit would translate (1) a pair of input signals having a low differential potential and a possibly high common-mode potential into (2) a pair of output signals having the same low differential potential and a low common-mode potential. As used here, "low" and "high" refer to potentials that are, respectively, below or above the nominal supply potential (3.3 V) at which standard complementary metal oxide/semiconductor (CMOS) integrated circuits are designed to operate. The input common-mode potential could lie between 0 and 10 V; the output common-mode potential would be 2 V. This translation would make it possible to process the pair of signals by use of standard 3.3-V CMOS analog and/or mixed-signal (analog and digital) circuitry on the same integrated-circuit chip. A schematic of the circuit is shown in the figure. Standard 3.3-V CMOS circuitry cannot withstand input potentials greater than about 4 V. However, there are many applications that involve low-differential-potential, high-common-mode-potential input signal pairs and in which standard 3.3-V CMOS circuitry, which is relatively inexpensive, would be the most appropriate circuitry for performing other functions on the integrated-circuit chip that handles the high-potential input signals. Thus, there is a need to combine high-voltage input circuitry with standard low-voltage CMOS circuitry on the same integrated-circuit chip. The proposed circuit would satisfy this need. In the proposed circuit, the input signals would be coupled into both a level-shifting pair and a common-mode-sensing pair of CMOS transistors. The output of the level-shifting pair would be fed as input to a differential pair of transistors. The resulting differential current output would pass through six standoff transistors to be mirrored into an output branch by four heterojunction bipolar transistors. The mirrored differential current would be converted back to potential by a pair of diode-connected transistors, which, by virtue of being identical to the input transistors, would reproduce the input differential potential at the output

Mixing in microfluidic devices and enhancement methods

PubMed Central

Ward, Kevin; Fan, Z Hugh

2015-01-01

Mixing in microfluidic devices presents a challenge due to laminar flows in microchannels, which result from low Reynolds numbers determined by the channel’s hydraulic diameter, flow velocity, and solution’s kinetic viscosity. To address this challenge, novel methods of mixing enhancement within microfluidic devices have been explored for a variety of applications. Passive mixing methods have been created, including those using ridges or slanted wells within the microchannels, as well as their variations with improved performance by varying geometry and patterns, by changing the properties of channel surfaces, and by optimization via simulations. In addition, active mixing methods including microstirrers, acoustic mixers, and flow pulsation have been investigated and integrated into microfluidic devices to enhance mixing in a more controllable manner. In general, passive mixers are easy to integrate, but difficult to control externally by users after fabrication. Active mixers usually take efforts to integrate within a device and they require external components (e.g. power sources) to operate. However, they can be controlled by users to a certain degree for tuned mixing. In this article, we provide a general overview of a number of passive and active mixers, discuss their advantages and disadvantages, and make suggestions on choosing a mixing method for a specific need as well as advocate possible integration of key elements of passive and active mixers to harness the advantages of both types. PMID:26549938

Mixing in microfluidic devices and enhancement methods.

PubMed

Ward, Kevin; Fan, Z Hugh

2015-09-01

Mixing in microfluidic devices presents a challenge due to laminar flows in microchannels, which result from low Reynolds numbers determined by the channel's hydraulic diameter, flow velocity, and solution's kinetic viscosity. To address this challenge, novel methods of mixing enhancement within microfluidic devices have been explored for a variety of applications. Passive mixing methods have been created, including those using ridges or slanted wells within the microchannels, as well as their variations with improved performance by varying geometry and patterns, by changing the properties of channel surfaces, and by optimization via simulations. In addition, active mixing methods including microstirrers, acoustic mixers, and flow pulsation have been investigated and integrated into microfluidic devices to enhance mixing in a more controllable manner. In general, passive mixers are easy to integrate, but difficult to control externally by users after fabrication. Active mixers usually take efforts to integrate within a device and they require external components (e.g. power sources) to operate. However, they can be controlled by users to a certain degree for tuned mixing. In this article, we provide a general overview of a number of passive and active mixers, discuss their advantages and disadvantages, and make suggestions on choosing a mixing method for a specific need as well as advocate possible integration of key elements of passive and active mixers to harness the advantages of both types.

Introduction to special section of the Journal of Family Psychology, advances in mixed methods in family psychology: integrative and applied solutions for family science.

PubMed

Weisner, Thomas S; Fiese, Barbara H

2011-12-01

Mixed methods in family psychology refer to the systematic integration of qualitative and quantitative techniques to represent family processes and settings. Over the past decade, significant advances have been made in study design, analytic strategies, and technological support (such as software) that allow for the integration of quantitative and qualitative methods and for making appropriate inferences from mixed methods. This special section of the Journal of Family Psychology illustrates how mixed methods may be used to advance knowledge in family science through identifying important cultural differences in family structure, beliefs, and practices, and revealing patterns of family relationships to generate new measurement paradigms and inform clinical practice. Guidance is offered to advance mixed methods research in family psychology through sound principles of peer review.

Mixed time integration methods for transient thermal analysis of structures, appendix 5

NASA Technical Reports Server (NTRS)

Liu, W. K.

1982-01-01

Mixed time integration methods for transient thermal analysis of structures are studied. An efficient solution procedure for predicting the thermal behavior of aerospace vehicle structures was developed. A 2D finite element computer program incorporating these methodologies is being implemented. The performance of these mixed time finite element algorithms can then be evaluated employing the proposed example problem.

An equivalent domain integral method in the two-dimensional analysis of mixed mode crack problems

NASA Technical Reports Server (NTRS)

Raju, I. S.; Shivakumar, K. N.

1990-01-01

An equivalent domain integral (EDI) method for calculating J-integrals for two-dimensional cracked elastic bodies is presented. The details of the method and its implementation are presented for isoparametric elements. The EDI method gave accurate values of the J-integrals for two mode I and two mixed mode problems. Numerical studies showed that domains consisting of one layer of elements are sufficient to obtain accurate J-integral values. Two procedures for separating the individual modes from the domain integrals are presented.

The Effectiveness of an Integrated Conceptual Approach to Teaching Middle School Science: A Mixed Methods Investigation

ERIC Educational Resources Information Center

Frampton, Susan K.

2009-01-01

This study was designed to compare the effectiveness of using traditional and integrated instructional strategies to increase student understanding of the core concepts of energy. There are mixed messages in the literature as to the success of using an integrated approach to teach science content, despite suggestions its use improves student…

Three flavor neutrino oscillations in matter: Flavor diagonal potentials, the adiabatic basis, and the CP phase

NASA Astrophysics Data System (ADS)

Kneller, James P.; McLaughlin, Gail C.

2009-09-01

We discuss the three neutrino flavor evolution problem with general, flavor-diagonal, matter potentials and a fully parametrized mixing matrix that includes CP violation, and derive expressions for the eigenvalues, mixing angles, and phases. We demonstrate that, in the limit that the mu and tau potentials are equal, the eigenvalues and matter mixing angles θ˜12 and θ˜13 are independent of the CP phase, although θ˜23 does have CP dependence. Since we are interested in developing a framework that can be used for S matrix calculations of neutrino flavor transformation, it is useful to work in a basis that contains only off-diagonal entries in the Hamiltonian. We derive the “nonadiabaticity” parameters that appear in the Hamiltonian in this basis. We then introduce the neutrino S matrix, derive its evolution equation and the integral solution. We find that this new Hamiltonian, and therefore the S matrix, in the limit that the μ and τ neutrino potentials are the same, is independent of both θ˜23 and the CP violating phase. In this limit, any CP violation in the flavor basis can only be introduced via the rotation matrices, and so effects which derive from the CP phase are then straightforward to determine. We then show explicitly that the electron neutrino and electron antineutrino survival probability is independent of the CP phase in this limit. Conversely, if the CP phase is nonzero and mu and tau matter potentials are not equal, then the electron neutrino survival probability cannot be independent of the CP phase.

Comparison of mixed-mode stress-intensity factors obtained through displacement correlation, J-integral formulation, and modified crack-closure integral

NASA Astrophysics Data System (ADS)

Bittencourt, Tulio N.; Barry, Ahmabou; Ingraffea, Anthony R.

This paper presents a comparison among stress-intensity factors for mixed-mode two-dimensional problems obtained through three different approaches: displacement correlation, J-integral, and modified crack-closure integral. All mentioned procedures involve only one analysis step and are incorporated in the post-processor page of a finite element computer code for fracture mechanics analysis (FRANC). Results are presented for a closed-form solution problem under mixed-mode conditions. The accuracy of these described methods then is discussed and analyzed in the framework of their numerical results. The influence of the differences among the three methods on the predicted crack trajectory of general problems is also discussed.

The Contribution of Mixed Methods Research to the Field of Childhood Trauma: A Narrative Review Focused on Data Integration

ERIC Educational Resources Information Center

Boeije, Hennie; Slagt, Meike; van Wesel, Floryt

2013-01-01

In mixed methods research (MMR), integrating the quantitative and the qualitative components of a study is assumed to result in additional knowledge (or "yield"). This narrative review examines the extent to which MMR is used in the field of childhood trauma and provides directions for improving mixed methods studies in this field. A…

On the solution of integral equations with a generalized cauchy kernel

NASA Technical Reports Server (NTRS)

Kaya, A. C.; Erdogan, F.

1986-01-01

In this paper a certain class of singular integral equations that may arise from the mixed boundary value problems in nonhomogeneous materials is considered. The distinguishing feature of these equations is that in addition to the Cauchy singularity, the kernels contain terms that are singular only at the end points. In the form of the singular integral equations adopted, the density function is a potential or a displacement and consequently the kernel has strong singularities of the form (t-x) sup-2, x sup n-2 (t+x) sup n, (n or = 2, 0x,tb). The complex function theory is used to determine the fundamental function of the problem for the general case and a simple numerical technique is described to solve the integral equation. Two examples from the theory of elasticity are then considered to show the application of the technique.

Optimizing Integrated Terminal Airspace Operations Under Uncertainty

NASA Technical Reports Server (NTRS)

Bosson, Christabelle; Xue, Min; Zelinski, Shannon

2014-01-01

In the terminal airspace, integrated departures and arrivals have the potential to increase operations efficiency. Recent research has developed geneticalgorithm- based schedulers for integrated arrival and departure operations under uncertainty. This paper presents an alternate method using a machine jobshop scheduling formulation to model the integrated airspace operations. A multistage stochastic programming approach is chosen to formulate the problem and candidate solutions are obtained by solving sample average approximation problems with finite sample size. Because approximate solutions are computed, the proposed algorithm incorporates the computation of statistical bounds to estimate the optimality of the candidate solutions. A proof-ofconcept study is conducted on a baseline implementation of a simple problem considering a fleet mix of 14 aircraft evolving in a model of the Los Angeles terminal airspace. A more thorough statistical analysis is also performed to evaluate the impact of the number of scenarios considered in the sampled problem. To handle extensive sampling computations, a multithreading technique is introduced.

Agriculture, nutrition, and health in global development: typology and metrics for integrated interventions and research.

PubMed

Masters, William A; Webb, Patrick; Griffiths, Jeffrey K; Deckelbaum, Richard J

2014-12-01

Despite rhetoric arguing that enhanced agriculture leads to improved nutrition and health, there is scant empirical evidence about potential synergies across sectors or about the mix of actions that best supports all three sectors. The geographic scale and socioeconomic nature of these interventions require integration of previously separate research methods. This paper proposes a typology of interventions and a metric of integration among them to help researchers build on each other's results, facilitating integration in methods to inform the design of multisector interventions. The typology recognizes the importance of regional effect modifiers that are not themselves subject to randomized assignment, and trade-offs in how policies and programs are implemented, evaluated, and scaled. Using this typology could facilitate methodological pluralism, helping researchers in one field use knowledge generated elsewhere, each using the most appropriate method for their situation. © 2014 New York Academy of Sciences.

Free energy of mixing of acetone and methanol: a computer simulation investigation.

PubMed

Idrissi, Abdenacer; Polok, Kamil; Barj, Mohammed; Marekha, Bogdan; Kiselev, Mikhail; Jedlovszky, Pál

2013-12-19

The change of the Helmholtz free energy, internal energy, and entropy accompanying the mixing of acetone and methanol is calculated in the entire composition range by the method of thermodynamic integration using three different potential model combinations of the two compounds. In the first system, both molecules are described by the OPLS, and in the second system, both molecules are described by the original TraPPE force field, whereas in the third system a modified version of the TraPPE potential is used for acetone in combination with the original TraPPE model of methanol. The results reveal that, in contrast with the acetone-water system, all of these three model combinations are able to reproduce the full miscibility of acetone and methanol, although the thermodynamic driving force of this mixing is very small. It is also seen, in accordance with the finding of former structural analyses, that the mixing of the two components is driven by the entropy term corresponding to the ideal mixing, which is large enough to overcompensate the effect of the energy increase and entropy loss due to the interaction of the unlike components in the mixtures. Among the three model combinations, the use of the original TraPPE model of methanol and modified TraPPE model of acetone turns out to be clearly the best in this respect, as it is able to reproduce the experimental free energy, internal energy, and entropy of mixing values within 0.15 kJ/mol, 0.2 kJ/mol, and 1 J/(mol K), respectively, in the entire composition range. The success of this model combination originates from the fact that the use of the modified TraPPE model of acetone instead of the original one in these mixtures improves the reproduction of the entropy of mixing, while it retains the ability of the original model of excellently reproducing the internal energy of mixing.

Analysis of Fuel Vaporization, Fuel-Air Mixing, and Combustion in Integrated Mixer-Flame Holders

NASA Technical Reports Server (NTRS)

Deur, J. M.; Cline, M. C.

2004-01-01

Requirements to limit pollutant emissions from the gas turbine engines for the future High-Speed Civil Transport (HSCT) have led to consideration of various low-emission combustor concepts. One such concept is the Integrated Mixer-Flame Holder (IMFH). This report describes a series of IMFH analyses performed with KIVA-II, a multi-dimensional CFD code for problems involving sprays, turbulence, and combustion. To meet the needs of this study, KIVA-II's boundary condition and chemistry treatments are modified. The study itself examines the relationships between fuel vaporization, fuel-air mixing, and combustion. Parameters being considered include: mixer tube diameter, mixer tube length, mixer tube geometry (converging-diverging versus straight walls), air inlet velocity, air inlet swirl angle, secondary air injection (dilution holes), fuel injection velocity, fuel injection angle, number of fuel injection ports, fuel spray cone angle, and fuel droplet size. Cases are run with and without combustion to examine the variations in fuel-air mixing and potential for flashback due to the above parameters. The degree of fuel-air mixing is judged by comparing average, minimum, and maximum fuel/air ratios at the exit of the mixer tube, while flame stability is monitored by following the location of the flame front as the solution progresses from ignition to steady state. Results indicate that fuel-air mixing can be enhanced by a variety of means, the best being a combination of air inlet swirl and a converging-diverging mixer tube geometry. With the IMFH configuration utilized in the present study, flashback becomes more common as the mixer tube diameter is increased and is instigated by disturbances associated with the dilution hole flow.

Rigorous buoyancy driven bubble mixing for centrifugal microfluidics.

PubMed

Burger, S; Schulz, M; von Stetten, F; Zengerle, R; Paust, N

2016-01-21

We present batch-mode mixing for centrifugal microfluidics operated at fixed rotational frequency. Gas is generated by the disk integrated decomposition of hydrogen peroxide (H2O2) to liquid water (H2O) and gaseous oxygen (O2) and inserted into a mixing chamber. There, bubbles are formed that ascent through the liquid in the artificial gravity field and lead to drag flow. Additionaly, strong buoyancy causes deformation and rupture of the gas bubbles and induces strong mixing flows in the liquids. Buoyancy driven bubble mixing is quantitatively compared to shake mode mixing, mixing by reciprocation and vortex mixing. To determine mixing efficiencies in a meaningful way, the different mixers are employed for mixing of a lysis reagent and human whole blood. Subsequently, DNA is extracted from the lysate and the amount of DNA recovered is taken as a measure for mixing efficiency. Relative to standard vortex mixing, DNA extraction based on buoyancy driven bubble mixing resulted in yields of 92 ± 8% (100 s mixing time) and 100 ± 8% (600 s) at 130g centrifugal acceleration. Shake mode mixing yields 96 ± 11% and is thus equal to buoyancy driven bubble mixing. An advantage of buoyancy driven bubble mixing is that it can be operated at fixed rotational frequency, however. The additional costs of implementing buoyancy driven bubble mixing are low since both the activation liquid and the catalyst are very low cost and no external means are required in the processing device. Furthermore, buoyancy driven bubble mixing can easily be integrated in a monolithic manner and is compatible to scalable manufacturing technologies such as injection moulding or thermoforming. We consider buoyancy driven bubble mixing an excellent alternative to shake mode mixing, in particular if the processing device is not capable of providing fast changes of rotational frequency or if the low average rotational frequency is challenging for the other integrated fluidic operations.

Effect of integrating straw into agricultural soils on soil infiltration and evaporation.

PubMed

Cao, Jiansheng; Liu, Changming; Zhang, Wanjun; Guo, Yunlong

2012-01-01

Soil water movement is a critical consideration for crop yield in straw-integrated fields. This study used an indoor soil column experiment to determine soil infiltration and evaporation characteristics in three forms of direct straw-integrated soils (straw mulching, straw mixing and straw inter-layering). Straw mulching is covering the land surface with straw. Straw mixing is mixing straw with the top 10 cm surface soil. Then straw inter-layering is placing straw at the 20 cm soil depth. There are generally good correlations among the mulch integration methods at p < 0.05, and with average errors/biases <10%. Straw mixing exhibited the best effect in terms of soil infiltration, followed by straw mulching. Due to over-burden weight-compaction effect, straw inter-layering somehow retarded soil infiltration. In terms of soil water evaporation, straw mulching exhibited the best effect. This was followed by straw mixing and then straw inter-layering. Straw inter-layering could have a long-lasting positive effect on soil evaporation as it limited the evaporative consumption of deep soil water. The responses of the direct straw integration modes to soil infiltration and evaporation could lay the basis for developing efficient water-conservation strategies. This is especially useful for water-scarce agricultural regions such as the arid/semi-arid regions of China.

An integrated modeling approach for estimating hydrologic responses to future urbanization and climate changes in a mixed-use midwestern watershed.

PubMed

Sunde, Michael G; He, Hong S; Hubbart, Jason A; Urban, Michael A

2018-08-15

Future urban development and climatic changes are likely to affect hydrologic regimes in many watersheds. Quantifying potential water regime changes caused by these stressors is therefore crucial for enabling decision makers to develop viable environmental management strategies. This study presents an approach that integrates mid-21st century impervious surface growth estimates derived from the Imperviousness Change Analysis Tool with downscaled climate model projections and a hydrologic model Soil and Water Assessment Tool to characterize potential water regime changes in a mixed-use watershed in central Missouri, USA. Results for the climate change only scenario showed annual streamflow and runoff decreases (-10.7% and -9.2%) and evapotranspiration increases (+6.8%), while results from the urbanization only scenario showed streamflow and runoff increases (+3.8% and +9.3%) and evapotranspiration decreases (-2.4%). Results for the combined impacts scenario suggested that climatic changes could have a larger impact than urbanization on annual streamflow, (overall decrease of -6.1%), and could largely negate surface runoff increases caused by urbanization. For the same scenario, climatic changes exerted a stronger influence on annual evapotranspiration than urbanization (+3.9%). Seasonal results indicated that the relative influences of urbanization and climatic changes vary seasonally. Climatic changes most greatly influenced streamflow and runoff during winter and summer, and evapotranspiration during summer. During some seasons the directional change for hydrologic processes matched for both stressors. This work presented a practicable approach for investigating the relative influences of mid-21st century urbanization and climatic changes on the hydrology of a representative mixed-use watershed, adding to a limited body of research on this topic. This was done using a transferrable approach that can be adapted for watersheds in other regions. Copyright © 2018 Elsevier Ltd. All rights reserved.

Oxide_Oxide Ceramic Matrix Composite (CMC) Exhaust Mixer Development in the NASA Environmentally Responsible Aviation (ERA) Project

NASA Technical Reports Server (NTRS)

Kiser, J. Douglas; Bansal, Narottam P.; Szelagowski, James; Sokhey, Jagdish; Heffernan, Tab; Clegg, Joseph; Pierluissi, Anthony; Riedell, Jim; Wyen, Travis; Atmur, Steven;

Using mixed methods research in medical education: basic guidelines for researchers.

PubMed

Schifferdecker, Karen E; Reed, Virginia A

2009-07-01

Mixed methods research involves the collection, analysis and integration of both qualitative and quantitative data in a single study. The benefits of a mixed methods approach are particularly evident when studying new questions or complex initiatives and interactions, which is often the case in medical education research. Basic guidelines for when to use mixed methods research and how to design a mixed methods study in medical education research are not readily available. The purpose of this paper is to remedy that situation by providing an overview of mixed methods research, research design models relevant for medical education research, examples of each research design model in medical education research, and basic guidelines for medical education researchers interested in mixed methods research. Mixed methods may prove superior in increasing the integrity and applicability of findings when studying new or complex initiatives and interactions in medical education research. They deserve an increased presence and recognition in medical education research.

Adaptation of Chinese Graduate Students to the Academic Integrity Requirements of a U.S. University: A Mixed Methods Research

ERIC Educational Resources Information Center

Jian, Hu

2012-01-01

The purpose of this mixed method study was to investigate how graduates originating from mainland China adapt to the U.S. academic integrity requirements. In the first, quantitative phase of the study, the research questions focused on understanding the state of academic integrity in China. This guiding question was divided into two sub-questions,…

Using 3D geological modelling and geochemical mixing models to characterise alluvial aquifer recharge sources in the upper Condamine River catchment, Queensland, Australia.

PubMed

Martinez, Jorge L; Raiber, Matthias; Cendón, Dioni I

2017-01-01

The influence of mountain front recharge on the water balance of alluvial valley aquifers located in upland catchments of the Condamine River basin in Queensland, Australia, is investigated through the development of an integrated hydrogeological framework. A combination of three-dimensional (3D) geological modelling, hydraulic gradient maps, multivariate statistical analyses and hydrochemical mixing calculations is proposed for the identification of hydrochemical end-members and quantification of the relative contributions of each end-member to alluvial aquifer recharge. The recognised end-members correspond to diffuse recharge and lateral groundwater inflows from three hydrostratigraphic units directly connected to the alluvial aquifer. This approach allows mapping zones of potential inter-aquifer connectivity and areas of groundwater mixing between underlying units and the alluvium. Mixing calculations using samples collected under baseflow conditions reveal that lateral contribution from a regional volcanic aquifer system represents the majority (41%) of inflows to the alluvial aquifer. Diffuse recharge contribution (35%) and inflow from two sedimentary bedrock hydrostratigraphic units (collectively 24%) comprise the remainder of major recharge sources. A detailed geochemical assessment of alluvial groundwater evolution along a selected flowpath of a representative subcatchment of the Condamine River basin confirms mixing as a key process responsible for observed spatial variations in hydrochemistry. Dissolution of basalt-related minerals and dolomite, CO 2 uptake, ion-exchange, precipitation of clay minerals, and evapotranspiration further contribute to the hydrochemical evolution of groundwater in the upland alluvial aquifer. This study highlights the benefits of undertaking an integrated approach that combines multiple independent lines of evidence. The proposed methods can be applied to investigate processes associated with inter-aquifer mixing, including groundwater contamination resulting from depressurisation of underlying geological units hydraulically connected to the shallower water reservoirs. Copyright © 2016 Elsevier B.V. All rights reserved.

Mixing console design for telematic applications in live performance and remote recording

NASA Astrophysics Data System (ADS)

Samson, David J.

The development of a telematic mixing console addresses audio engineers' need for a fully integrated system architecture that improves efficiency and control for applications such as distributed performance and remote recording. Current systems used in state of the art telematic performance rely on software-based interconnections with complex routing schemes that offer minimal flexibility or control over key parameters needed to achieve a professional workflow. The lack of hardware-based control in the current model limits the full potential of both the engineer and the system. The new architecture provides a full-featured platform that, alongside customary features, integrates (1) surround panning capability for motorized, binaural manikin heads, as well as all sources in the included auralization module, (2) self-labelling channel strips, responsive to change at all remote sites, (3) onboard roundtrip latency monitoring, (4) synchronized remote audio recording and monitoring, and (5) flexible routing. These features combined with robust parameter automation and precise analog control will raise the standard for telematic systems as well as advance the development of networked audio systems for both research and professional audio markets.

A Library of Rad Hard Mixed-Voltage/Mixed-Signal Building Blocks for Integration of Avionics Systems for Deep Space

NASA Technical Reports Server (NTRS)

Mojarradi, M. M.; Blaes, B.; Kolawa, E. A.; Blalock, B. J.; Li, H. W.; Buck, K.; Houge, D.

2001-01-01

To build the sensor intensive system-on-a-chip for the next generation spacecrafts for deep space, Center for Integration of Space Microsystems at JPL (CISM) takes advantage of the lower power rating and inherent radiation resistance of Silicon on Insulator technology (SOI). We are developing a suite of mixed-voltage and mixed-signal building blocks in Honeywell's SOI process that can enable the rapid integration of the next generation avionics systems with lower power rating, higher reliability, longer life, and enhanced radiation tolerance for spacecrafts such as the Europa Orbiter and Europa Lander. The mixed-voltage building blocks are predominantly for design of adaptive power management systems. Their design centers around an LDMOS structure that is being developed by Honeywell, Boeing Corp, and the University of Idaho. The mixed-signal building blocks are designed to meet the low power, extreme radiation requirement of deep space applications. These building blocks are predominantly used to interface analog sensors to the digital CPU of the next generation avionics system on a chip. Additional information is contained in the original extended abstract.

Characterization of NiFe oxyhydroxide electrocatalysts by integrated electronic structure calculations and spectroelectrochemistry.

PubMed

Goldsmith, Zachary K; Harshan, Aparna K; Gerken, James B; Vörös, Márton; Galli, Giulia; Stahl, Shannon S; Hammes-Schiffer, Sharon

2017-03-21

NiFe oxyhydroxide materials are highly active electrocatalysts for the oxygen evolution reaction (OER), an important process for carbon-neutral energy storage. Recent spectroscopic and computational studies increasingly support iron as the site of catalytic activity but differ with respect to the relevant iron redox state. A combination of hybrid periodic density functional theory calculations and spectroelectrochemical experiments elucidate the electronic structure and redox thermodynamics of Ni-only and mixed NiFe oxyhydroxide thin-film electrocatalysts. The UV/visible light absorbance of the Ni-only catalyst depends on the applied potential as metal ions in the film are oxidized before the onset of OER activity. In contrast, absorbance changes are negligible in a 25% Fe-doped catalyst up to the onset of OER activity. First-principles calculations of proton-coupled redox potentials and magnetizations reveal that the Ni-only system features oxidation of Ni 2+ to Ni 3+ , followed by oxidation to a mixed Ni 3+/4+ state at a potential coincident with the onset of OER activity. Calculations on the 25% Fe-doped system show the catalyst is redox inert before the onset of catalysis, which coincides with the formation of Fe 4+ and mixed Ni oxidation states. The calculations indicate that introduction of Fe dopants changes the character of the conduction band minimum from Ni-oxide in the Ni-only to predominantly Fe-oxide in the NiFe electrocatalyst. These findings provide a unified experimental and theoretical description of the electrochemical and optical properties of Ni and NiFe oxyhydroxide electrocatalysts and serve as an important benchmark for computational characterization of mixed-metal oxidation states in heterogeneous catalysts.

Characterization of NiFe oxyhydroxide electrocatalysts by integrated electronic structure calculations and spectroelectrochemistry

PubMed Central

Goldsmith, Zachary K.; Harshan, Aparna K.; Gerken, James B.; Galli, Giulia; Stahl, Shannon S.

2017-01-01

NiFe oxyhydroxide materials are highly active electrocatalysts for the oxygen evolution reaction (OER), an important process for carbon-neutral energy storage. Recent spectroscopic and computational studies increasingly support iron as the site of catalytic activity but differ with respect to the relevant iron redox state. A combination of hybrid periodic density functional theory calculations and spectroelectrochemical experiments elucidate the electronic structure and redox thermodynamics of Ni-only and mixed NiFe oxyhydroxide thin-film electrocatalysts. The UV/visible light absorbance of the Ni-only catalyst depends on the applied potential as metal ions in the film are oxidized before the onset of OER activity. In contrast, absorbance changes are negligible in a 25% Fe-doped catalyst up to the onset of OER activity. First-principles calculations of proton-coupled redox potentials and magnetizations reveal that the Ni-only system features oxidation of Ni2+ to Ni3+, followed by oxidation to a mixed Ni3+/4+ state at a potential coincident with the onset of OER activity. Calculations on the 25% Fe-doped system show the catalyst is redox inert before the onset of catalysis, which coincides with the formation of Fe4+ and mixed Ni oxidation states. The calculations indicate that introduction of Fe dopants changes the character of the conduction band minimum from Ni-oxide in the Ni-only to predominantly Fe-oxide in the NiFe electrocatalyst. These findings provide a unified experimental and theoretical description of the electrochemical and optical properties of Ni and NiFe oxyhydroxide electrocatalysts and serve as an important benchmark for computational characterization of mixed-metal oxidation states in heterogeneous catalysts. PMID:28265083

Displacement potential solution of a guided deep beam of composite materials under symmetric three-point bending

NASA Astrophysics Data System (ADS)

Rahman, M. Muzibur; Ahmad, S. Reaz

2017-12-01

An analytical investigation of elastic fields for a guided deep beam of orthotropic composite material having three point symmetric bending is carried out using displacement potential boundary modeling approach. Here, the formulation is developed as a single function of space variables defined in terms of displacement components, which has to satisfy the mixed type of boundary conditions. The relevant displacement and stress components are derived into infinite series using Fourier integral along with suitable polynomials coincided with boundary conditions. The results are presented mainly in the form of graphs and verified with finite element solutions using ANSYS. This study shows that the analytical and numerical solutions are in good agreement and thus enhances reliability of the displacement potential approach.

Teaching Service Modelling to a Mixed Class: An Integrated Approach

ERIC Educational Resources Information Center

Deng, Jeremiah D.; Purvis, Martin K.

2015-01-01

Service modelling has become an increasingly important area in today's telecommunications and information systems practice. We have adapted a Network Design course in order to teach service modelling to a mixed class of both the telecommunication engineering and information systems backgrounds. An integrated approach engaging mathematics teaching…

Triangulation and Mixed Methods Designs: Data Integration with New Research Technologies

ERIC Educational Resources Information Center

Fielding, Nigel G.

2012-01-01

Data integration is a crucial element in mixed methods analysis and conceptualization. It has three principal purposes: illustration, convergent validation (triangulation), and the development of analytic density or "richness." This article discusses such applications in relation to new technologies for social research, looking at three…

Properties of palm oil fuel ash cement sand brick containing pulverized cockle shell as partial sand replacement

NASA Astrophysics Data System (ADS)

Mat Aris, S.; Muthusamy, K.; Uzer, A.; Ahmad, S. Wan

2018-04-01

Environmental pollution caused by the disposal of solid wastes generated from both palm oil industry and cockle shell trade has motivated researches to explore the potential of these wastes. Integrating these wastes in production of construction material is one of the ways to reduce amount of waste thrown at dumping area. Thus, the present investigation investigates the performance of palm oil fuel ash (POFA) cement sand brick containing pulverized cockle shell as partial fine aggregate replacement. All mixes used contain 20% of POFA as partial cement replacement. Total of six mixes were prepared by adding a range of pulverized cockle shell that is 0%, 10%, 20%, 30%, 40% and 50% as partial sand replacement. The mixes were prepared in form of brick. All the water cured samples were tested for compressive strength and flexural strength until 28 days. Findings show that brick produced using 20% pulverized cockle shell exhibit the highest compressive strength and flexural strength also the lowest water absorption value.

Observations of open-ocean deep convection in the northwestern Mediterranean Sea: Seasonal and interannual variability of mixing and deep water masses for the 2007-2013 Period

NASA Astrophysics Data System (ADS)

Houpert, L.; Durrieu de Madron, X.; Testor, P.; Bosse, A.; D'Ortenzio, F.; Bouin, M. N.; Dausse, D.; Le Goff, H.; Kunesch, S.; Labaste, M.; Coppola, L.; Mortier, L.; Raimbault, P.

2016-11-01

We present here a unique oceanographic and meteorological data set focus on the deep convection processes. Our results are essentially based on in situ data (mooring, research vessel, glider, and profiling float) collected from a multiplatform and integrated monitoring system (MOOSE: Mediterranean Ocean Observing System on Environment), which monitored continuously the northwestern Mediterranean Sea since 2007, and in particular high-frequency potential temperature, salinity, and current measurements from the mooring LION located within the convection region. From 2009 to 2013, the mixed layer depth reaches the seabed, at a depth of 2330m, in February. Then, the violent vertical mixing of the whole water column lasts between 9 and 12 days setting up the characteristics of the newly formed deep water. Each deep convection winter formed a new warmer and saltier "vintage" of deep water. These sudden inputs of salt and heat in the deep ocean are responsible for trends in salinity (3.3 ± 0.2 × 10-3/yr) and potential temperature (3.2 ± 0.5 × 10-3 C/yr) observed from 2009 to 2013 for the 600-2300 m layer. For the first time, the overlapping of the three "phases" of deep convection can be observed, with secondary vertical mixing events (2-4 days) after the beginning of the restratification phase, and the restratification/spreading phase still active at the beginning of the following deep convection event.

Integrating Uncertainty Analysis in the Risk Characterization of In-Place Remedial Strategies for Contaminated Sediments

DTIC Science & Technology

2009-03-01

sediment. The plastic limit for the samples tested averaged to 43.4 percent while the liquid limit was 77.7 percent. As discussed above, the sediment...sediment from the drums, clean it of debris such as plastic , clam shells, sticks, etc., mix to a density to be maintained consistently among all... pollutant loading to aquatic ecosystems has decreased in the past decades, contaminated sediments have shifted from a sink to a potential source of

Potential for Terahertz/Optical, Two Color Non-linear Sensing of Liquid Biochemical Agents

DTIC Science & Technology

2011-05-18

through the geometry and phase matching dependencies in the setup using enantiomeric and racemic limonene as a me- dium. In completely identical...around the 532 nm 18 795.2 cm−1 YAG line generated in S- limonene by 0.61 THz 20.3 cm−1. The rotation angle was 27°. At each point, 500 mixing events...In the following, signals are extracted as the integral of the total sideband line. Sum frequency sidebands for both S- limonene and a ra- cemic

Mixed bilayer containing dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylserine: lipid complexation, ion binding, and electrostatics.

PubMed

Pandit, Sagar A; Bostick, David; Berkowitz, Max L

2003-11-01

Two mixed bilayers containing dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylserine at a ratio of 5:1 are simulated in NaCl electrolyte solutions of different concentration using the molecular dynamics technique. Direct NH.O and CH.O hydrogen bonding between lipids was observed to serve as the basis of interlipid complexation. It is deduced from our results and previous studies that dipalmitoylphosphatidylcholine alone is less likely to form interlipid complexes than in the presence of bound ions or other bilayer "impurities" such as dipalmitoylphosphatidylserine. The binding of counterions is observed and quantitated. Based upon the calculated ion binding constants, the Gouy-Chapman surface potential (theta) is calculated. In addition we calculated the electrostatic potential profile (Phi) by twice integrating the system charge distribution. A large discrepancy between and the value of Phi at the membrane surface is observed. However, at "larger" distance from the bilayer surface, a qualitative similarity in the z-profiles of Phi and psi(GC) is seen. The discrepancy between the two potential profiles near the bilayer surface is attributed to the discrete and nonbulk-like nature of water in the interfacial region and to the complex geometry of this region.

THE POTENTIAL OF USING EXERCISE IN NATURE AS AN INTERVENTION TO ENHANCE EXERCISE BEHAVIOR: RESULTS FROM A PILOT STUDY.

PubMed

Calogiuri, Giovanna; Nordtug, Hildegunn; Weydahl, Andi

2015-10-01

According to attention-restoration theory (ART), natural environments can provide restorative experiences. In this pilot study, a mixed-methods approach was used to examine the potential of using exercise in a natural environment to enhance exercise behaviors. The study included an assessment study and an intervention study (overall n = 19). The participants underwent a standardized exercise program including biking and circuit strength training, either indoors or outdoors in nature. Measurements included connectedness to nature, perceived exertion, perceived environmental restorativeness, enjoyment, affect, future exercise intention, and self-reported exercise behavior. The participants also wrote a brief text describing the way in which the environment influenced their feelings while exercising. Quantitative data were analyzed using the Spearman rank correlation and linear mixed-effects modeling. The qualitative information was analyzed thematically. The integrated results indicated that, in accordance with ART, exercising in nature was associated with a greater potential for restoration and affective responses, which in some participants led to enhanced intention to exercise and increased exercise behavior. However, some perceived that the indoor exercise provided a more effective workout. Further studies on larger samples are needed.

A Study of Interactions between Mixing and Chemical Reaction Using the Rate-Controlled Constrained-Equilibrium Method

NASA Astrophysics Data System (ADS)

Hadi, Fatemeh; Janbozorgi, Mohammad; Sheikhi, M. Reza H.; Metghalchi, Hameed

2016-10-01

The rate-controlled constrained-equilibrium (RCCE) method is employed to study the interactions between mixing and chemical reaction. Considering that mixing can influence the RCCE state, the key objective is to assess the accuracy and numerical performance of the method in simulations involving both reaction and mixing. The RCCE formulation includes rate equations for constraint potentials, density and temperature, which allows taking account of mixing alongside chemical reaction without splitting. The RCCE is a dimension reduction method for chemical kinetics based on thermodynamics laws. It describes the time evolution of reacting systems using a series of constrained-equilibrium states determined by RCCE constraints. The full chemical composition at each state is obtained by maximizing the entropy subject to the instantaneous values of the constraints. The RCCE is applied to a spatially homogeneous constant pressure partially stirred reactor (PaSR) involving methane combustion in oxygen. Simulations are carried out over a wide range of initial temperatures and equivalence ratios. The chemical kinetics, comprised of 29 species and 133 reaction steps, is represented by 12 RCCE constraints. The RCCE predictions are compared with those obtained by direct integration of the same kinetics, termed detailed kinetics model (DKM). The RCCE shows accurate prediction of combustion in PaSR with different mixing intensities. The method also demonstrates reduced numerical stiffness and overall computational cost compared to DKM.

Mixing a Grounded Theory Approach with a Randomized Controlled Trial Related to Intimate Partner Violence: What Challenges Arise for Mixed Methods Research?

PubMed Central

Catallo, Cristina; Jack, Susan M.; Ciliska, Donna; MacMillan, Harriet L.

2013-01-01

Little is known about how to systematically integrate complex qualitative studies within the context of randomized controlled trials. A two-phase sequential explanatory mixed methods study was conducted in Canada to understand how women decide to disclose intimate partner violence in emergency department settings. Mixing a RCT (with a subanalysis of data) with a grounded theory approach required methodological modifications to maintain the overall rigour of this mixed methods study. Modifications were made to the following areas of the grounded theory approach to support the overall integrity of the mixed methods study design: recruitment of participants, maximum variation and negative case sampling, data collection, and analysis methods. Recommendations for future studies include: (1) planning at the outset to incorporate a qualitative approach with a RCT and to determine logical points during the RCT to integrate the qualitative component and (2) consideration for the time needed to carry out a RCT and a grounded theory approach, especially to support recruitment, data collection, and analysis. Data mixing strategies should be considered during early stages of the study, so that appropriate measures can be developed and used in the RCT to support initial coding structures and data analysis needs of the grounded theory phase. PMID:23577245

Stability of mixed time integration schemes for transient thermal analysis

NASA Technical Reports Server (NTRS)

Liu, W. K.; Lin, J. I.

1982-01-01

A current research topic in coupled-field problems is the development of effective transient algorithms that permit different time integration methods with different time steps to be used simultaneously in various regions of the problems. The implicit-explicit approach seems to be very successful in structural, fluid, and fluid-structure problems. This paper summarizes this research direction. A family of mixed time integration schemes, with the capabilities mentioned above, is also introduced for transient thermal analysis. A stability analysis and the computer implementation of this technique are also presented. In particular, it is shown that the mixed time implicit-explicit methods provide a natural framework for the further development of efficient, clean, modularized computer codes.

Designing a mixed methods study in primary care.

PubMed

Creswell, John W; Fetters, Michael D; Ivankova, Nataliya V

2004-01-01

Mixed methods or multimethod research holds potential for rigorous, methodologically sound investigations in primary care. The objective of this study was to use criteria from the literature to evaluate 5 mixed methods studies in primary care and to advance 3 models useful for designing such investigations. We first identified criteria from the social and behavioral sciences to analyze mixed methods studies in primary care research. We then used the criteria to evaluate 5 mixed methods investigations published in primary care research journals. Of the 5 studies analyzed, 3 included a rationale for mixing based on the need to develop a quantitative instrument from qualitative data or to converge information to best understand the research topic. Quantitative data collection involved structured interviews, observational checklists, and chart audits that were analyzed using descriptive and inferential statistical procedures. Qualitative data consisted of semistructured interviews and field observations that were analyzed using coding to develop themes and categories. The studies showed diverse forms of priority: equal priority, qualitative priority, and quantitative priority. Data collection involved quantitative and qualitative data gathered both concurrently and sequentially. The integration of the quantitative and qualitative data in these studies occurred between data analysis from one phase and data collection from a subsequent phase, while analyzing the data, and when reporting the results. We recommend instrument-building, triangulation, and data transformation models for mixed methods designs as useful frameworks to add rigor to investigations in primary care. We also discuss the limitations of our study and the need for future research.

Integrating Micro-Macro Organizational Communication Research: Rationale, Issues, and Mechanisms.

ERIC Educational Resources Information Center

Miller, Vernon; And Others

The integration of micro-macro variables is critical to the development of organizational communication as an academic field. Mixed-level analysis is inherent in organizational phenomena, and its neglect perpetuates the gap in and fragmentation of organizational communication theories. Three of the many ways to design mixed-level analyses are…

Optimized holographic femtosecond laser patterning method towards rapid integration of high-quality functional devices in microchannels.

PubMed

Zhang, Chenchu; Hu, Yanlei; Du, Wenqiang; Wu, Peichao; Rao, Shenglong; Cai, Ze; Lao, Zhaoxin; Xu, Bing; Ni, Jincheng; Li, Jiawen; Zhao, Gang; Wu, Dong; Chu, Jiaru; Sugioka, Koji

2016-09-13

Rapid integration of high-quality functional devices in microchannels is in highly demand for miniature lab-on-a-chip applications. This paper demonstrates the embellishment of existing microfluidic devices with integrated micropatterns via femtosecond laser MRAF-based holographic patterning (MHP) microfabrication, which proves two-photon polymerization (TPP) based on spatial light modulator (SLM) to be a rapid and powerful technology for chip functionalization. Optimized mixed region amplitude freedom (MRAF) algorithm has been used to generate high-quality shaped focus field. Base on the optimized parameters, a single-exposure approach is developed to fabricate 200 × 200 μm microstructure arrays in less than 240 ms. Moreover, microtraps, QR code and letters are integrated into a microdevice by the advanced method for particles capture and device identification. These results indicate that such a holographic laser embellishment of microfluidic devices is simple, flexible and easy to access, which has great potential in lab-on-a-chip applications of biological culture, chemical analyses and optofluidic devices.

Optimized holographic femtosecond laser patterning method towards rapid integration of high-quality functional devices in microchannels

NASA Astrophysics Data System (ADS)

Zhang, Chenchu; Hu, Yanlei; Du, Wenqiang; Wu, Peichao; Rao, Shenglong; Cai, Ze; Lao, Zhaoxin; Xu, Bing; Ni, Jincheng; Li, Jiawen; Zhao, Gang; Wu, Dong; Chu, Jiaru; Sugioka, Koji

2016-09-01

Rapid integration of high-quality functional devices in microchannels is in highly demand for miniature lab-on-a-chip applications. This paper demonstrates the embellishment of existing microfluidic devices with integrated micropatterns via femtosecond laser MRAF-based holographic patterning (MHP) microfabrication, which proves two-photon polymerization (TPP) based on spatial light modulator (SLM) to be a rapid and powerful technology for chip functionalization. Optimized mixed region amplitude freedom (MRAF) algorithm has been used to generate high-quality shaped focus field. Base on the optimized parameters, a single-exposure approach is developed to fabricate 200 × 200 μm microstructure arrays in less than 240 ms. Moreover, microtraps, QR code and letters are integrated into a microdevice by the advanced method for particles capture and device identification. These results indicate that such a holographic laser embellishment of microfluidic devices is simple, flexible and easy to access, which has great potential in lab-on-a-chip applications of biological culture, chemical analyses and optofluidic devices.

Normal compression wave scattering by a permeable crack in a fluid-saturated poroelastic solid

NASA Astrophysics Data System (ADS)

Song, Yongjia; Hu, Hengshan; Rudnicki, John W.

2017-04-01

A mathematical formulation is presented for the dynamic stress intensity factor (mode I) of a finite permeable crack subjected to a time-harmonic propagating longitudinal wave in an infinite poroelastic solid. In particular, the effect of the wave-induced fluid flow due to the presence of a liquid-saturated crack on the dynamic stress intensity factor is analyzed. Fourier sine and cosine integral transforms in conjunction with Helmholtz potential theory are used to formulate the mixed boundary-value problem as dual integral equations in the frequency domain. The dual integral equations are reduced to a Fredholm integral equation of the second kind. It is found that the stress intensity factor monotonically decreases with increasing frequency, decreasing the fastest when the crack width and the slow wave wavelength are of the same order. The characteristic frequency at which the stress intensity factor decays the fastest shifts to higher frequency values when the crack width decreases.

Micromachined magnetohydrodynamic actuators and sensors

DOEpatents

Lee, Abraham P.; Lemoff, Asuncion V.

2000-01-01

A magnetohydrodynamic (MHD) micropump and microsensor which utilizes micromachining to integrate the electrodes with microchannels and includes a magnet for producing magnetic fields perpendicular to both the electrical current direction and the fluid flow direction. The magnet can also be micromachined and integrated with the micropump using existing technology. The MHD micropump, for example, can generate continuous, reversible flow, with readily controllable flow rates. The flow can be reversed by either reversing the electrical current flow or reversing the magnetic field. By mismatching the electrodes, a swirling vortex flow can be generated for potential mixing applications. No moving parts are necessary and the dead volume is minimal. The micropumps can be placed at any position in a fluidic circuit and a combination of micropumps can generate fluidic plugs and valves.

Mixing and Formation of Layers by Internal Wave Forcing

NASA Astrophysics Data System (ADS)

Dossmann, Yvan; Pollet, Florence; Odier, Philippe; Dauxois, Thierry

2017-12-01

The energy pathways from propagating internal waves to the scales of irreversible mixing in the ocean are not fully described. In the ocean interior, the triadic resonant instability is an intrinsic destabilization process that may enhance the energy cascade away from topographies. The present study focuses on the integrated impact of mixing processes induced by a propagative normal mode-1 over long-term experiments in an idealized setup. The internal wave dynamics and the evolution of the density profile are followed using the light attenuation technique. Diagnostics of the turbulent diffusivity KT and background potential energy BPE are provided. Mixing effects result in a partially mixed layer colocated with the region of maximum shear induced by the forcing normal mode. The maximum measured turbulent diffusivity is 250 times larger than the molecular value, showing that diapycnal mixing is largely enhanced by small-scale turbulent processes. Intermittency and reversible energy transfers are discussed to bridge the gap between the present diagnostic and the larger values measured in Dossmann et al. (). The mixing efficiency η is assessed by relating the BPE growth to the linearized KE input. One finds a value of Γ=12-19%, larger than the mixing efficiency in the case of breaking interfacial wave. After several hours of forcing, the development of staircases in the density profile is observed. This mechanism has been previously observed in experiments with weak homogeneous turbulence and explained by Phillips (1972) argument. The present experiments suggest that internal wave forcing could also induce the formation of density interfaces in the ocean.

The consequences of alternating diet on performance and food preferences of a specialist leaf beetle.

PubMed

Tremmel, Martin; Müller, Caroline

2013-08-01

The food quality of a given host plant tissue will influence the performance and may also affect the preference behavior of herbivorous animals. As nutrient contents and defense metabolite concentrations can vary significantly between different parts of a plant and change over time, herbivores are potentially confronted with diet differing in quality even when feeding on a single plant individual. Here we investigated to what extent feeding exclusively either on young or old, mature leaves of Brassica rapa or on a mixed diet of young and old leaves offered in alternating order affects the larval performance, food consumption, and the host preference behavior of adult mustard leaf beetles, Phaedon cochleariae. Analyzing different leaf quality traits, we found lower water contents, no changes in C:N ratio but more than threefold higher glucosinolate concentrations in young compared to old leaves. Individuals reared on mixed diet performed as well as animals reared on young leaves. Thus, compared to animals feeding exclusively on highly nutritious young leaves, diet-mixing individuals may balance the lower nutrient intake by a dilution of adverse secondary metabolites. Alternatively, they may integrate over the variation in their food, using a previously assimilated resource for growth at times of scarcity. Animals reared on old leaves grew less and had a prolonged larval developmental time, although they showed increased consumption indicating compensatory feeding. Additionally, we found that experience with a certain diet affected the preference behavior. Whereas individuals reared exclusively on young leaves preferred young over old leaves for feeding and oviposition, we did not find any preferences by animals reared exclusively on old leaves or by females reared on alternating diet. Thus, in contrast to positive feedbacks for animals reared on young leaves, an integrative growth of diet-mixing individuals potentially leads to a lack of feedback during development. Taken together, our results suggest that different diet regimes can lead to comparable performance of mustard leaf beetles but experienced feedbacks may differ and thus convey distinct diet preferences. Copyright © 2013 Elsevier Ltd. All rights reserved.

Reduction of pollutants and disinfection of industrial wastewater by an integrated system of copper electrocoagulation and electrochemically generated hydrogen peroxide.

PubMed

Barrera-Díaz, Carlos E; Frontana-Uribe, Bernardo A; Roa-Morales, Gabriela; Bilyeu, Bryan W

2015-01-01

The objective of this study was to evaluate the effect of copper electrocoagulation and hydrogen peroxide on COD, color, turbidity, and bacterial activity in a mixed industry wastewater. The integrated system of copper electrocoagulation and hydrogen peroxide is effective at reducing the organic and bacterial content of industrial wastewater. The copper electrocoagulation alone reduces COD by 56% in 30 min at pH 2.8, but the combined system reduces COD by 78%, biochemical oxygen demand (BOD5) by 81%, and color by 97% under the same conditions. Colloidal particles are flocculated effectively, as shown by the reduction of zeta potential and the 84% reduction in turbidity and 99% reduction in total solids. Additionally, the total coliforms, fecal coliforms, and bacteria are all reduced by 99%. The integrated system is effective and practical for the reduction of both organic and bacterial content in industrial wastewater.

Enhanced single cell oil production by mixed culture of Chlorella pyrenoidosa and Rhodotorula glutinis using cassava bagasse hydrolysate as carbon source.

PubMed

Liu, Lu; Chen, Junhui; Lim, Phaik-Eem; Wei, Dong

2018-05-01

The single cell oil (SCO) production by the mono and mixed culture of microalgae Chlorella pyrenoidosa and red yeast Rhodotorula glutinis was investigated using non-detoxified cassava bagasse hydrolysate (CBH) as carbon source. The results suggested that the two strains were able to tolerate and even degrade some byproducts presented in the CBH, and the mixed culture approach enhanced the degradation of certain byproducts. Biomass (20.37 ± 0.38 g/L) and lipid yield (10.42 ± 1.21 g/L) of the mixed culture achieved in the batch culture were significantly higher than that of the mono-cultures (p < 0.05). The fed-batch culture further raised the biomass and lipid yield to 31.45 ± 4.93 g/L and 18.47 ± 3.25 g/L, respectively. The lipids mainly composed of oleic acid and palmitic acid, suggesting the potential applications such as biofuel feedstock, cosmetics, food additives and lubricant. This study provided new insights for the integration of the economical SCO production with agro-industrial waste disposal. Copyright © 2018 Elsevier Ltd. All rights reserved.

Magnetically coupled system for mixing

DOEpatents

Miller, III, Harlan; Meichel, George; Legere, Edward; Malkiel, Edwin; Woods, Robert Paul; Ashley, Oliver; Katz, Joseph; Ward, Jason; Petersen, Paul

2015-09-22

The invention provides a mixing system comprising a magnetically coupled drive system and a foil for cultivating algae, or cyanobacteria, in an open or enclosed vessel. The invention provides effective mixing, low energy usage, low capital expenditure, and ease of drive system component maintenance while maintaining the integrity of a sealed mixing vessel.

Magnetically coupled system for mixing

DOEpatents

Miller, III, Harlan; Meichel, George; Legere, Edward; Malkiel, Edwin; Woods, Robert Paul; Ashley, Oliver; Katz, Joseph; Ward, Jason; Petersen, Paul

2014-04-01

The invention provides a mixing system comprising a magnetically coupled drive system and a foil for cultivating algae, or cyanobacteria, in an open or enclosed vessel. The invention provides effective mixing, low energy usage, low capital expenditure, and ease of drive system component maintenance while maintaining the integrity of a sealed mixing vessel.

regSNPs: a strategy for prioritizing regulatory single nucleotide substitutions

PubMed Central

Teng, Mingxiang; Ichikawa, Shoji; Padgett, Leah R.; Wang, Yadong; Mort, Matthew; Cooper, David N.; Koller, Daniel L.; Foroud, Tatiana; Edenberg, Howard J.; Econs, Michael J.; Liu, Yunlong

2012-01-01

Motivation: One of the fundamental questions in genetics study is to identify functional DNA variants that are responsible to a disease or phenotype of interest. Results from large-scale genetics studies, such as genome-wide association studies (GWAS), and the availability of high-throughput sequencing technologies provide opportunities in identifying causal variants. Despite the technical advances, informatics methodologies need to be developed to prioritize thousands of variants for potential causative effects. Results: We present regSNPs, an informatics strategy that integrates several established bioinformatics tools, for prioritizing regulatory SNPs, i.e. the SNPs in the promoter regions that potentially affect phenotype through changing transcription of downstream genes. Comparing to existing tools, regSNPs has two distinct features. It considers degenerative features of binding motifs by calculating the differences on the binding affinity caused by the candidate variants and integrates potential phenotypic effects of various transcription factors. When tested by using the disease-causing variants documented in the Human Gene Mutation Database, regSNPs showed mixed performance on various diseases. regSNPs predicted three SNPs that can potentially affect bone density in a region detected in an earlier linkage study. Potential effects of one of the variants were validated using luciferase reporter assay. Contact: yunliu@iupui.edu Supplementary information: Supplementary data are available at Bioinformatics online PMID:22611130

Fuel injection nozzle and method of manufacturing the same

DOE Office of Scientific and Technical Information (OSTI.GOV)

Monaghan, James Christopher; Johnson, Thomas Edward; Ostebee, Heath Michael

A fuel injection head for use in a fuel injection nozzle comprises a monolithic body portion comprising an upstream face, an opposite downstream face, and a peripheral wall extending therebetween. A plurality of pre-mix tubes are integrally formed with and extend axially through the body portion. Each of the pre-mix tubes comprises an inlet adjacent the upstream face, an outlet adjacent the downstream face, and a channel extending between the inlet and the outlet. Each pre-mix tube also includes at least one fuel injector that at least partially extends outward from an exterior surface of the pre-mix tube, wherein themore » fuel injector is integrally formed with the pre-mix tube and is configured to facilitate fuel flow between the body portion and the channel.« less

Giant nonlinear response at a plasmonic nanofocus drives efficient four-wave mixing

NASA Astrophysics Data System (ADS)

Nielsen, Michael P.; Shi, Xingyuan; Dichtl, Paul; Maier, Stefan A.; Oulton, Rupert F.

2017-12-01

Efficient optical frequency mixing typically must accumulate over large interaction lengths because nonlinear responses in natural materials are inherently weak. This limits the efficiency of mixing processes owing to the requirement of phase matching. Here, we report efficient four-wave mixing (FWM) over micrometer-scale interaction lengths at telecommunications wavelengths on silicon. We used an integrated plasmonic gap waveguide that strongly confines light within a nonlinear organic polymer. The gap waveguide intensifies light by nanofocusing it to a mode cross-section of a few tens of nanometers, thus generating a nonlinear response so strong that efficient FWM accumulates over wavelength-scale distances. This technique opens up nonlinear optics to a regime of relaxed phase matching, with the possibility of compact, broadband, and efficient frequency mixing integrated with silicon photonics.

A Convective Vorticity Vector Associated With Tropical Convection: A 2D Cloud-Resolving Modeling Study

NASA Technical Reports Server (NTRS)

Gao, Shou-Ting; Ping, Fan; Li, Xiao-Fan; Tao, Wei-Kuo

2004-01-01

Although dry/moist potential vorticity is a useful physical quantity for meteorological analysis, it cannot be applied to the analysis of 2D simulations. A convective vorticity vector (CVV) is introduced in this study to analyze 2D cloud-resolving simulation data associated with 2D tropical convection. The cloud model is forced by the vertical velocity, zonal wind, horizontal advection, and sea surface temperature obtained from the TOGA COARE, and is integrated for a selected 10-day period. The CVV has zonal and vertical components in the 2D x-z frame. Analysis of zonally-averaged and mass-integrated quantities shows that the correlation coefficient between the vertical component of the CVV and the sum of the cloud hydrometeor mixing ratios is 0.81, whereas the correlation coefficient between the zonal component and the sum of the mixing ratios is only 0.18. This indicates that the vertical component of the CVV is closely associated with tropical convection. The tendency equation for the vertical component of the CVV is derived and the zonally-averaged and mass-integrated tendency budgets are analyzed. The tendency of the vertical component of the CVV is determined by the interaction between the vorticity and the zonal gradient of cloud heating. The results demonstrate that the vertical component of the CVV is a cloud-linked parameter and can be used to study tropical convection.

Acceptability and feasibility of an interprofessional end-of-life/palliative care educational intervention in the intensive care unit: A mixed-methods study.

PubMed

Graham, Robyn; Lepage, Carolan; Boitor, Madalina; Petizian, Stephanie; Fillion, Lise; Gélinas, Céline

2018-06-21

This study aimed to describe a seven hour End-of-Life/Palliative Care educational intervention including online content related to symptom management, communication and decision-making capacity and an in-person group integration activity, from the perspective of the interprofessional team in terms of its acceptability and feasibility. A mixed-methods study design was used. The study was conducted in a medical-surgical Intensive Care Unit in Montreal, Canada. The sample consisted of 27 clinicians of the Intensive Care Unit interprofessional team who completed the End-of-Life/Palliative Care educational intervention, and participated in focus groups and completed a self-administered questionnaire. The main outcomes were the acceptability and feasibility of the educational intervention. The intervention was perceived to be appropriate and suitable in providing clinicians with knowledge and skills in symptom management and communication through self-reflection and self-evaluation, provision of assessment tools and promotion of interprofessional teamwork. The online format was more feasible, but the in-person group activity was key for the integration of knowledge and the promotion of interprofessional discussions. Findings suggest that an interprofessional educational intervention integrating on-line content with in-person training has the potential to support clinicians in providing quality End-of-Life/Palliative Care in the Intensive Care Unit. Copyright © 2018. Published by Elsevier Ltd.

Prototyping of Poly(dimethylsiloxane) Interfaces for Flow Gating, Reagent Mixing, and Tubing Connection in Capillary Electrophoresis

PubMed Central

Zhang, Qiyang; Gong, Maojun

2014-01-01

Integrated microfluidic systems coupled with electrophoretic separations have broad application in biological and chemical analysis. Interfaces for the connection of various functional parts play a major role in the performance of a system. Here we developed a rapid prototyping method to fabricate monolithic poly(dimethylsiloxane) (PDMS) Interfaces for flow-gated injection, online reagent mixing, and tube-to-tube connection in an integrated capillary electrophoresis (CE) system. The basic idea was based on the properties of PDMS: elasticity, transparency, and suitability for prototyping. The molds for these interfaces were prepared by using commercially available stainless steel wires and nylon lines or silica capillaries. A steel wire was inserted through the diameter of a nylon line and a cross format was obtained as the mold for PDMS casting of flow gates and 4-way mixers. These interfaces accommodated tubing connection through PDMS elasticity and provided easy visual trouble shooting. The flow gate used smaller channel diameters thus reducing flow rate by 25 fold for effective gating compared with mechanically machined counterparts. Both PDMS mixers and the tube-to-tube connectors could minimize the sample dead volume by using an appropriate capillary configuration. As a whole, the prototyped PDMS interfaces are reusable, inexpensive, convenient for connection, and robust when integrated with the CE detection system. Therefore, these interfaces could see potential applications in CE and CE-coupled systems. PMID:24331370

White matter tract integrity predicts visual search performance in young and older adults.

PubMed

Bennett, Ilana J; Motes, Michael A; Rao, Neena K; Rypma, Bart

2012-02-01

Functional imaging research has identified frontoparietal attention networks involved in visual search, with mixed evidence regarding whether different networks are engaged when the search target differs from distracters by a single (elementary) versus multiple (conjunction) features. Neural correlates of visual search, and their potential dissociation, were examined here using integrity of white matter connecting the frontoparietal networks. The effect of aging on these brain-behavior relationships was also of interest. Younger and older adults performed a visual search task and underwent diffusion tensor imaging (DTI) to reconstruct 2 frontoparietal (superior and inferior longitudinal fasciculus; SLF and ILF) and 2 midline (genu, splenium) white matter tracts. As expected, results revealed age-related declines in conjunction, but not elementary, search performance; and in ILF and genu tract integrity. Importantly, integrity of the superior longitudinal fasciculus, ILF, and genu tracts predicted search performance (conjunction and elementary), with no significant age group differences in these relationships. Thus, integrity of white matter tracts connecting frontoparietal attention networks contributes to search performance in younger and older adults. Copyright © 2012 Elsevier Inc. All rights reserved.

White Matter Tract Integrity Predicts Visual Search Performance in Young and Older Adults

PubMed Central

Bennett, Ilana J.; Motes, Michael A.; Rao, Neena K.; Rypma, Bart

2011-01-01

Functional imaging research has identified fronto-parietal attention networks involved in visual search, with mixed evidence regarding whether different networks are engaged when the search target differs from distracters by a single (elementary) versus multiple (conjunction) features. Neural correlates of visual search, and their potential dissociation, were examined here using integrity of white matter connecting the fronto-parietal networks. The effect of aging on these brain-behavior relationships was also of interest. Younger and older adults performed a visual search task and underwent diffusion tensor imaging (DTI) to reconstruct two fronto-parietal (superior and inferior longitudinal fasciculus, SLF and ILF) and two midline (genu, splenium) white matter tracts. As expected, results revealed age-related declines in conjunction, but not elementary, search performance; and in ILF and genu tract integrity. Importantly, integrity of the SLF, ILF, and genu tracts predicted search performance (conjunction and elementary), with no significant age group differences in these relationships. Thus, integrity of white matter tracts connecting fronto-parietal attention networks contributes to search performance in younger and older adults. PMID:21402431

Improving the Accuracy of Mapping Urban Vegetation Carbon Density by Combining Shadow Remove, Spectral Unmixing Analysis and Spatial Modeling

NASA Astrophysics Data System (ADS)

Qie, G.; Wang, G.; Wang, M.

2016-12-01

Mixed pixels and shadows due to buildings in urban areas impede accurate estimation and mapping of city vegetation carbon density. In most of previous studies, these factors are often ignored, which thus result in underestimation of city vegetation carbon density. In this study we presented an integrated methodology to improve the accuracy of mapping city vegetation carbon density. Firstly, we applied a linear shadow remove analysis (LSRA) on remotely sensed Landsat 8 images to reduce the shadow effects on carbon estimation. Secondly, we integrated a linear spectral unmixing analysis (LSUA) with a linear stepwise regression (LSR), a logistic model-based stepwise regression (LMSR) and k-Nearest Neighbors (kNN), and utilized and compared the integrated models on shadow-removed images to map vegetation carbon density. This methodology was examined in Shenzhen City of Southeast China. A data set from a total of 175 sample plots measured in 2013 and 2014 was used to train the models. The independent variables statistically significantly contributing to improving the fit of the models to the data and reducing the sum of squared errors were selected from a total of 608 variables derived from different image band combinations and transformations. The vegetation fraction from LSUA was then added into the models as an important independent variable. The estimates obtained were evaluated using a cross-validation method. Our results showed that higher accuracies were obtained from the integrated models compared with the ones using traditional methods which ignore the effects of mixed pixels and shadows. This study indicates that the integrated method has great potential on improving the accuracy of urban vegetation carbon density estimation. Key words: Urban vegetation carbon, shadow, spectral unmixing, spatial modeling, Landsat 8 images

Potential of telepresence robots to enhance social connectedness in older adults with dementia: an integrative review of feasibility.

PubMed

Moyle, Wendy; Arnautovska, Urska; Ownsworth, Tamara; Jones, Cindy

2017-12-01

Socially assistive robots are increasingly used as a therapeutic tool for people with dementia, as a means to improve quality of life through social connection. This paper presents a mixed-method integrative review of telepresence robots used to improve social connection of people with dementia by enabling real-time communication with their carers. A systematic search of Medline, ProQuest, PubMed, Scopus, Web of Science, CINAHL, EMBASE, and the Cochrane library was conducted to gather available evidence on the use of telepresence robots, specifically videoconferencing, to improve social connectedness, in people with dementia. A narrative synthesis was used to analyze the included studies. A review of 1,035 records, identified four eligible peer-reviewed publications, reporting findings about three different mobile telepresence robots. The study designs included qualitative and mixed-methods approaches, focusing primarily on examining the feasibility and acceptability of the telepresence robots within the context of dementia care. These studies reported both positive outcomes of using telepresence robots to connect people with dementia to others, as well as barriers, such as a lack of experience in using a robot and technological issues. Although limited, the current literature suggests that telepresence robots have potential utility for improving social connectedness of people with dementia and their carers. However, more systematic feasibility studies are needed to inform the development of telepresence robots followed by clinical trials to establish efficacy within dementia care.

Cooperative Drought Adaptation: Integrating Infrastructure Development, Conservation, and Water Transfers into Adaptive Policy Pathways

NASA Astrophysics Data System (ADS)

Zeff, H. B.; Characklis, G. W.; Reed, P. M.; Herman, J. D.

2015-12-01

Water supply policies that integrate portfolios of short-term management decisions with long-term infrastructure development enable utilities to adapt to a range of future scenarios. An effective mix of short-term management actions can augment existing infrastructure, potentially forestalling new development. Likewise, coordinated expansion of infrastructure such as regional interconnections and shared treatment capacity can increase the effectiveness of some management actions like water transfers. Highly adaptable decision pathways that mix long-term infrastructure options and short-term management actions require decision triggers capable of incorporating the impact of these time-evolving decisions on growing water supply needs. Here, we adapt risk-based triggers to sequence a set of potential infrastructure options in combination with utility-specific conservation actions and inter-utility water transfers. Individual infrastructure pathways can be augmented with conservation or water transfers to reduce the cost of meeting utility objectives, but they can also include cooperatively developed, shared infrastructure that expands regional capacity to transfer water. This analysis explores the role of cooperation among four water utilities in the 'Research Triangle' region of North Carolina by formulating three distinct categories of adaptive policy pathways: independent action (utility-specific conservation and supply infrastructure only), weak cooperation (utility-specific conservation and infrastructure development with regional transfers), and strong cooperation (utility specific conservation and jointly developed of regional infrastructure that supports transfers). Results suggest that strong cooperation aids the utilities in meeting their individual objections at substantially lower costs and with fewer irreversible infrastructure options.

A full potential inverse method based on a density linearization scheme for wing design

NASA Technical Reports Server (NTRS)

Shankar, V.

1982-01-01

A mixed analysis inverse procedure based on the full potential equation in conservation form was developed to recontour a given base wing to produce density linearization scheme in applying the pressure boundary condition in terms of the velocity potential. The FL030 finite volume analysis code was modified to include the inverse option. The new surface shape information, associated with the modified pressure boundary condition, is calculated at a constant span station based on a mass flux integration. The inverse method is shown to recover the original shape when the analysis pressure is not altered. Inverse calculations for weakening of a strong shock system and for a laminar flow control (LFC) pressure distribution are presented. Two methods for a trailing edge closure model are proposed for further study.

Integrating Quantitative and Qualitative Data in Mixed Methods Research--Challenges and Benefits

ERIC Educational Resources Information Center

Almalki, Sami

2016-01-01

This paper is concerned with investigating the integration of quantitative and qualitative data in mixed methods research and whether, in spite of its challenges, it can be of positive benefit to many investigative studies. The paper introduces the topic, defines the terms with which this subject deals and undertakes a literature review to outline…

Coarse-Grained Models for Automated Fragmentation and Parametrization of Molecular Databases.

PubMed

Fraaije, Johannes G E M; van Male, Jan; Becherer, Paul; Serral Gracià, Rubèn

2016-12-27

We calibrate coarse-grained interaction potentials suitable for screening large data sets in top-down fashion. Three new algorithms are introduced: (i) automated decomposition of molecules into coarse-grained units (fragmentation); (ii) Coarse-Grained Reference Interaction Site Model-Hypernetted Chain (CG RISM-HNC) as an intermediate proxy for dissipative particle dynamics (DPD); and (iii) a simple top-down coarse-grained interaction potential/model based on activity coefficient theories from engineering (using COSMO-RS). We find that the fragment distribution follows Zipf and Heaps scaling laws. The accuracy in Gibbs energy of mixing calculations is a few tenths of a kilocalorie per mole. As a final proof of principle, we use full coarse-grained sampling through DPD thermodynamics integration to calculate log P OW for 4627 compounds with an average error of 0.84 log unit. The computational speeds per calculation are a few seconds for CG RISM-HNC and a few minutes for DPD thermodynamic integration.

Tier-2 Optimisation for Computational Density/Diversity and Big Data

NASA Astrophysics Data System (ADS)

Fay, R. B.; Bland, J.

2014-06-01

As the number of cores on chip continues to trend upwards and new CPU architectures emerge, increasing CPU density and diversity presents multiple challenges to site administrators. These include scheduling for massively multi-core systems (potentially including Graphical Processing Units (GPU), integrated and dedicated) and Many Integrated Core (MIC)) to ensure a balanced throughput of jobs while preserving overall cluster throughput, as well as the increasing complexity of developing for these heterogeneous platforms, and the challenge in managing this more complex mix of resources. In addition, meeting data demands as both dataset sizes increase and as the rate of demand scales with increased computational power requires additional performance from the associated storage elements. In this report, we evaluate one emerging technology, Solid State Drive (SSD) caching for RAID controllers, with consideration to its potential to assist in meeting evolving demand. We also briefly consider the broader developing trends outlined above in order to identify issues that may develop and assess what actions should be taken in the immediate term to address those.

Review of LLNL Mixed Waste Streams for the Application of Potential Waste Reduction Controls

DOE Office of Scientific and Technical Information (OSTI.GOV)

Belue, A; Fischer, R P

2007-01-08

In July 2004, LLNL adopted the International Standard ISO 14001 as a Work Smart Standard in lieu of DOE Order 450.1. In support of this new requirement the Director issued a new environmental policy that was documented in Section 3.0 of Document 1.2, ''ES&H Policies of LLNL'', in the ES&H Manual. In recent years the Environmental Management System (EMS) process has become formalized as LLNL adopted ISO 14001 as part of the contract under which the laboratory is operated for the Department of Energy (DOE). On May 9, 2005, LLNL revised its Integrated Safety Management System Description to enhance existingmore » environmental requirements to meet ISO 14001. Effective October 1, 2005, each new project or activity is required to be evaluated from an environmental aspect, particularly if a potential exists for significant environmental impacts. Authorizing organizations are required to consider the management of all environmental aspects, the applicable regulatory requirements, and reasonable actions that can be taken to reduce negative environmental impacts. During 2006, LLNL has worked to implement the corrective actions addressing the deficiencies identified in the DOE/LSO audit. LLNL has begun to update the present EMS to meet the requirements of ISO 14001:2004. The EMS commits LLNL--and each employee--to responsible stewardship of all the environmental resources in our care. The generation of mixed radioactive waste was identified as a significant environmental aspect. Mixed waste for the purposes of this report is defined as waste materials containing both hazardous chemical and radioactive constituents. Significant environmental aspects require that an Environmental Management Plan (EMP) be developed. The objective of the EMP developed for mixed waste (EMP-005) is to evaluate options for reducing the amount of mixed waste generated. This document presents the findings of the evaluation of mixed waste generated at LLNL and a proposed plan for reduction.« less

High Winds and the Vertical Structure of Chl-a in the Southern Ocean: Insights from Remote Sensing and Novel in situ Sensors

NASA Astrophysics Data System (ADS)

Carranza, M. M.; Gille, S. T.; Franks, P. J. S.; Johnson, K. S.; Girton, J. B.

2016-02-01

The Southern Ocean is under the influence of strong atmospheric synoptic activity and contains some of the oceans deepest mixed layers. Deep mixed layers can transport phytoplankton below the euphotic zone, and phytoplankton growth is hypothesized to be co-limited by iron and light. Atmospheric forcing drives changes in the mixed-layer depth (MLD) that influence light levels and nutrient input to the euphotic zone. In summer, when the MLD is shallow and close to the euphotic depth, high satellite Chl-a correlate with high winds, consistent with wind-driven entrainment that can potentially increase nutrient concentrations in the euphotic zone. However, correlations between Chl-a and diurnal winds are largest at zero time lag. High winds can inject nutrients on short timescales (< 1 day), but in situ incubation experiments after iron addition indicate phytoplankton growth on slightly longer timescales (> 3-4 days), suggesting that the correlations are not a result of growth. High winds can also entrain Chl-a from a subsurface Chl-a maximum. Novel bio-optical sensors mounted on elephant seals and autonomous floats allow us to examine the vertical structure of Chl-a in the Southern Ocean. In this study, we investigate the occurrence of subsurface Chl-a maxima. We find that surface Chl-a is a relatively good proxy for depth-integrated Chl-a within the euphotic zone but gives an inadequate representation of biomass within the mixed layer, particularly in the summer. Subsurface Chl-a maxima are not uncommon and may occur in all seasons. Chl-a maxima that correlate with particle backscattering in summer and fall are found near the base of the mixed layer, closer to the nutrient maximum than the light maximum, suggesting that nutrient limitation (i.e., essentially iron) can play a greater role than light limitation in governing productivity, and that high winds potentially entrain a subsurface Chl-a maximum into the summer mixed layer.

Hairy black hole stability in AdS, quantum mechanics on the half-line and holography

NASA Astrophysics Data System (ADS)

Anabalón, Andrés; Astefanesei, Dumitru; Oliva, Julio

2015-10-01

We consider the linear stability of 4-dimensional hairy black holes with mixed boundary conditions in Anti-de Sitter spacetime. We focus on the mass of scalar fields around the maximally supersymmetric vacuum of the gauged N=8 supergravity in four dimensions, m 2 = -2 l -2. It is shown that the Schrödinger operator on the half-line, governing the S 2, H 2 or {{R}}^2 invariant mode around the hairy black hole, allows for non-trivial self-adjoint extensions and each of them corresponds to a class of mixed boundary conditions in the gravitational theory. Discarding the self-adjoint extensions with a negative mode impose a restriction on these boundary conditions. The restriction is given in terms of an integral of the potential in the Schrödinger operator resembling the estimate of Simon for Schrödinger operators on the real line. In the context of AdS/CFT duality, our result has a natural interpretation in terms of the field theory dual effective potential.

Developing multifunctional nanoparticles in a 1-D coordination polymer of Cd(II)

NASA Astrophysics Data System (ADS)

Agarwal, Rashmi A.; Gupta, Neeraj K.

2017-11-01

A simple synthesis for the integration of different nanoparticles (NPs) including Ag, Au, Pd, Cr and mixed (Cu/Fe), has been demonstrated within the nanopores of a non-activated one dimensional porous coordination polymer (PCP) of Cd(II) due to its high flexible structure. There are two different mechanisms (acid formation (HCl/HNO3) and redox activity of the framework) elucidated by electron paramagnetic resonance (EPR). Presence of -NO2 groups of the ligand act as anchoring sites for metal ions of metal precursors leading to NPs growth within the PCP explained by FTIR. High resolution transmission electron microscopy (HRTEM) images provided insight of the chemical and physical characteristics of the NPs within the framework. Ag/AgO NPs exhibit excellent antibacterial properties at extremely low concentrations. The polymer shows potential for sequestration and reduction of hexavalent Cr (highly toxic) to elemental, trivalent and tetravalent Cr (non toxic). This framework is also an excellent template for fabrication and dry storage of nanoparticles synthesized by mixed metal precursors. Ferromagnetic properties have been shown by Ag and Au NPs integrated frameworks while Cu/Fe@Cd-PCP behaves as a paramagnet material at room temperature.

Dual and mixed nonsymmetric stress-based variational formulations for coupled thermoelastodynamics with second sound effect

NASA Astrophysics Data System (ADS)

Tóth, Balázs

2018-03-01

Some new dual and mixed variational formulations based on a priori nonsymmetric stresses will be developed for linearly coupled irreversible thermoelastodynamic problems associated with second sound effect according to the Lord-Shulman theory. Having introduced the entropy flux vector instead of the entropy field and defining the dissipation and the relaxation potential as the function of the entropy flux, a seven-field dual and mixed variational formulation will be derived from the complementary Biot-Hamilton-type variational principle, using the Lagrange multiplier method. The momentum-, the displacement- and the infinitesimal rotation vector, and the a priori nonsymmetric stress tensor, the temperature change, the entropy field and its flux vector are considered as the independent field variables of this formulation. In order to handle appropriately the six different groups of temporal prescriptions in the relaxed- and/or the strong form, two variational integrals will be incorporated into the seven-field functional. Then, eliminating the entropy from this formulation through the strong fulfillment of the constitutive relation for the temperature change with the use of the Legendre transformation between the enthalpy and Gibbs potential, a six-field dual and mixed action functional is obtained. As a further development, the elimination of the momentum- and the velocity vector from the six-field principle through the a priori satisfaction of the kinematic equation and the constitutive relation for the momentum vector leads to a five-field variational formulation. These principles are suitable for the transient analyses of the structures exposed to a thermal shock of short temporal domain or a large heat flux.

Integrating Stomach Content and Stable Isotope Analyses to Quantify the Diets of Pygoscelid Penguins

PubMed Central

Polito, Michael J.; Trivelpiece, Wayne Z.; Karnovsky, Nina J.; Ng, Elizabeth; Patterson, William P.; Emslie, Steven D.

2011-01-01

Stomach content analysis (SCA) and more recently stable isotope analysis (SIA) integrated with isotopic mixing models have become common methods for dietary studies and provide insight into the foraging ecology of seabirds. However, both methods have drawbacks and biases that may result in difficulties in quantifying inter-annual and species-specific differences in diets. We used these two methods to simultaneously quantify the chick-rearing diet of Chinstrap (Pygoscelis antarctica) and Gentoo (P. papua) penguins and highlight methods of integrating SCA data to increase accuracy of diet composition estimates using SIA. SCA biomass estimates were highly variable and underestimated the importance of soft-bodied prey such as fish. Two-source, isotopic mixing model predictions were less variable and identified inter-annual and species-specific differences in the relative amounts of fish and krill in penguin diets not readily apparent using SCA. In contrast, multi-source isotopic mixing models had difficulty estimating the dietary contribution of fish species occupying similar trophic levels without refinement using SCA-derived otolith data. Overall, our ability to track inter-annual and species-specific differences in penguin diets using SIA was enhanced by integrating SCA data to isotopic mixing modes in three ways: 1) selecting appropriate prey sources, 2) weighting combinations of isotopically similar prey in two-source mixing models and 3) refining predicted contributions of isotopically similar prey in multi-source models. PMID:22053199

Demand-Side Management and Integrated Resource Planning: Findings from a Survey of 24 Electric Utilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Schweitzer, M.

1991-01-01

Integrated resource planning differs from traditional utility planning practices primarily in its increased attention to demand-side management (DSM) programs and its integration of supply- and demand-side resources into a combined resource portfolio. This report details the findings from an Oak Ridge National Laboratory (ORNL) survey of 24 electric utilities that have well-developed integrated planning processes. These utilities account for roughly one-third of total capacity, electricity generation, and DSM-program expenditures nationwide. The ORNL survey was designed to obtain descriptive data on a national sample of utilities and to test a number of hypothesized relationships between selected utility characteristics and the mixmore » of resources selected for the integrated plan, with an emphasis on the use of DSM resources and the processes by which they are chosen. The survey solicited information on each utility's current and projected resource mix, operating environment, procedures used to screen potential DSM resources, techniques used to obtain public input and to integrate supply- and demand-side options into a unified plan, and procedures used in the final selection of resources for the plan.« less

Students' General Knowledge of the Learning Process: A Mixed Methods Study Illustrating Integrated Data Collection and Data Consolidation

ERIC Educational Resources Information Center

van Velzen, Joke H.

2018-01-01

There were two purposes for this mixed methods study: to investigate (a) the realistic meaning of awareness and understanding as the underlying constructs of general knowledge of the learning process and (b) a procedure for data consolidation. The participants were 11th-grade high school and first-year university students. Integrated data…

The Impact of Student Teaching Experience on Pre-Service Teachers' Readiness for Technology Integration: A Mixed Methods Study with Growth Curve Modeling

ERIC Educational Resources Information Center

Sun, Yan; Strobel, Johannes; Newby, Timothy J.

2017-01-01

Adopting a two-phase explanatory sequential mixed methods research design, the current study examined the impact of student teaching experiences on pre-service teachers' readiness for technology integration. In phase-1 of quantitative investigation, 2-level growth curve models were fitted using online repeated measures survey data collected from…

A Mixed Methods Analysis of the Effects of an Integrative Geobiological Study of Petrified Wood in Introductory College Geology Classrooms

ERIC Educational Resources Information Center

Clary, Renee M.; Wandersee, James H.

2007-01-01

Mixed methods research conducted across three semesters in introductory college geology classes (n=187, 190, 138) attempted to ascertain whether integrated study of petrified wood could serve as a portal to improved student geobiological understanding of fossilization, geologic time, and evolution. The Petrified Wood Survey[TM] was administered as…

Transcranial Magnetic Stimulation over Left Inferior Frontal and Posterior Temporal Cortex Disrupts Gesture-Speech Integration.

PubMed

Zhao, Wanying; Riggs, Kevin; Schindler, Igor; Holle, Henning

2018-02-21

Language and action naturally occur together in the form of cospeech gestures, and there is now convincing evidence that listeners display a strong tendency to integrate semantic information from both domains during comprehension. A contentious question, however, has been which brain areas are causally involved in this integration process. In previous neuroimaging studies, left inferior frontal gyrus (IFG) and posterior middle temporal gyrus (pMTG) have emerged as candidate areas; however, it is currently not clear whether these areas are causally or merely epiphenomenally involved in gesture-speech integration. In the present series of experiments, we directly tested for a potential critical role of IFG and pMTG by observing the effect of disrupting activity in these areas using transcranial magnetic stimulation in a mixed gender sample of healthy human volunteers. The outcome measure was performance on a Stroop-like gesture task (Kelly et al., 2010a), which provides a behavioral index of gesture-speech integration. Our results provide clear evidence that disrupting activity in IFG and pMTG selectively impairs gesture-speech integration, suggesting that both areas are causally involved in the process. These findings are consistent with the idea that these areas play a joint role in gesture-speech integration, with IFG regulating strategic semantic access via top-down signals acting upon temporal storage areas. SIGNIFICANCE STATEMENT Previous neuroimaging studies suggest an involvement of inferior frontal gyrus and posterior middle temporal gyrus in gesture-speech integration, but findings have been mixed and due to methodological constraints did not allow inferences of causality. By adopting a virtual lesion approach involving transcranial magnetic stimulation, the present study provides clear evidence that both areas are causally involved in combining semantic information arising from gesture and speech. These findings support the view that, rather than being separate entities, gesture and speech are part of an integrated multimodal language system, with inferior frontal gyrus and posterior middle temporal gyrus serving as critical nodes of the cortical network underpinning this system. Copyright © 2018 the authors 0270-6474/18/381891-10$15.00/0.

Microbiological-enhanced mixing across scales during in-situ bioreduction of metals and radionuclides at Department of Energy Sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Valocchi, Albert; Werth, Charles; Liu, Wen-Tso

Bioreduction is being actively investigated as an effective strategy for subsurface remediation and long-term management of DOE sites contaminated by metals and radionuclides (i.e. U(VI)). These strategies require manipulation of the subsurface, usually through injection of chemicals (e.g., electron donor) which mix at varying scales with the contaminant to stimulate metal reducing bacteria. There is evidence from DOE field experiments suggesting that mixing limitations of substrates at all scales may affect biological growth and activity for U(VI) reduction. Although current conceptual models hold that biomass growth and reduction activity is limited by physical mixing processes, a growing body of literaturemore » suggests that reaction could be enhanced by cell-to-cell interaction occurring over length scales extending tens to thousands of microns. Our project investigated two potential mechanisms of enhanced electron transfer. The first is the formation of single- or multiple-species biofilms that transport electrons via direct electrical connection such as conductive pili (i.e. ‘nanowires’) through biofilms to where the electron acceptor is available. The second is through diffusion of electron carriers from syntrophic bacteria to dissimilatory metal reducing bacteria (DMRB). The specific objectives of this work are (i) to quantify the extent and rate that electrons are transported between microorganisms in physical mixing zones between an electron donor and electron acceptor (e.g. U(IV)), (ii) to quantify the extent that biomass growth and reaction are enhanced by interspecies electron transport, and (iii) to integrate mixing across scales (e.g., microscopic scale of electron transfer and macroscopic scale of diffusion) in an integrated numerical model to quantify these mechanisms on overall U(VI) reduction rates. We tested these hypotheses with five tasks that integrate microbiological experiments, unique micro-fluidics experiments, flow cell experiments, and multi-scale numerical models. Continuous fed-batch reactors were used to derive kinetic parameters for DMRB, and to develop an enrichment culture for elucidation of syntrophic relationships in a complex microbial community. Pore and continuum scale experiments using microfluidic and bench top flow cells were used to evaluate the impact of cell-to-cell and microbial interactions on reaction enhancement in mixing-limited bioactive zones, and the mechanisms of this interaction. Some of the microfluidic experiments were used to develop and test models that considers direct cell-to-cell interactions during metal reduction. Pore scale models were incorporated into a multi-scale hybrid modeling framework that combines pore scale modeling at the reaction interface with continuum scale modeling. New computational frameworks for combining continuum and pore-scale models were also developed« less

Mixed time integration methods for transient thermal analysis of structures

NASA Technical Reports Server (NTRS)

Liu, W. K.

1982-01-01

The computational methods used to predict and optimize the thermal structural behavior of aerospace vehicle structures are reviewed. In general, two classes of algorithms, implicit and explicit, are used in transient thermal analysis of structures. Each of these two methods has its own merits. Due to the different time scales of the mechanical and thermal responses, the selection of a time integration method can be a different yet critical factor in the efficient solution of such problems. Therefore mixed time integration methods for transient thermal analysis of structures are being developed. The computer implementation aspects and numerical evaluation of these mixed time implicit-explicit algorithms in thermal analysis of structures are presented. A computationally useful method of estimating the critical time step for linear quadrilateral element is also given. Numerical tests confirm the stability criterion and accuracy characteristics of the methods. The superiority of these mixed time methods to the fully implicit method or the fully explicit method is also demonstrated.

Mixed time integration methods for transient thermal analysis of structures

NASA Technical Reports Server (NTRS)

Liu, W. K.

1983-01-01

The computational methods used to predict and optimize the thermal-structural behavior of aerospace vehicle structures are reviewed. In general, two classes of algorithms, implicit and explicit, are used in transient thermal analysis of structures. Each of these two methods has its own merits. Due to the different time scales of the mechanical and thermal responses, the selection of a time integration method can be a difficult yet critical factor in the efficient solution of such problems. Therefore mixed time integration methods for transient thermal analysis of structures are being developed. The computer implementation aspects and numerical evaluation of these mixed time implicit-explicit algorithms in thermal analysis of structures are presented. A computationally-useful method of estimating the critical time step for linear quadrilateral element is also given. Numerical tests confirm the stability criterion and accuracy characteristics of the methods. The superiority of these mixed time methods to the fully implicit method or the fully explicit method is also demonstrated.

Using a mixed-methods design to examine nurse practitioner integration in British Columbia.

PubMed

Sangster-Gormley, Esther; Griffith, Janessa; Schreiber, Rita; Borycki, Elizabeth

2015-07-01

To discuss and provide examples of how mixed-methods research was used to evaluate the integration of nurse practitioners (NPs) into a Canadian province. Legislation enabling NPs to practise in British Columbia (BC) was enacted in 2005. This research evaluated the integration of NPs and their effect on the BC healthcare system. Data were collected using surveys, focus groups, participant interviews and case studies over three years. Data sources and methods were triangulated to determine how the findings addressed the research questions. The challenges and benefits of using the multiphase design are highlighted in the paper. The multiphase mixed-methods research design was selected because of its applicability to evaluation research. The design proved to be robust and flexible in answering research questions. As sub-studies within the multiphase design are often published separately, it can be difficult for researchers to find examples. This paper highlights ways that a multiphase mixed-methods design can be conducted for researchers unfamiliar with the process.

Mixed method evaluation of the Virtual Traveller physically active lesson intervention: An analysis using the RE-AIM framework.

PubMed

Norris, E; Dunsmuir, S; Duke-Williams, O; Stamatakis, E; Shelton, N

2018-02-02

Physically active lessons integrating movement into academic content are a way to increase children's physical activity levels. Virtual Traveller was a physically active lesson intervention set in Year 4 (aged 8-9) primary school classes in Greater London, UK. Implemented by classroom teachers, it was a six-week intervention providing 10-min physically active Virtual Field Trips three times a week. The aim of this paper is to report the process evaluation of the Virtual Traveller randomized controlled trial according to RE-AIM framework criteria (Reach, Effectiveness, Adoption, Implementation and Maintenance). A mixed methods approach to evaluation was conducted with five intervention group classes. Six sources of data were collected via informed consent logs, teacher session logs, teacher and pupil questionnaires, teacher interviews and pupil focus groups. High participation and low attrition rates were identified (Reach) alongside positive evaluations of Virtual Traveller sessions from pupil and teachers (Effectiveness). Participants were from more deprived and ethnic backgrounds than local and national averages, with Virtual Traveller having the potential to be a free intervention (Adoption). 70% of sessions were delivered overall (Implementation) but no maintenance of the programme was evident at three month follow-up (Maintenance). Mixed method evaluation of Virtual Traveller showed potential for it to be implemented as a low-cost physically active lesson intervention in UK primary schools. Copyright © 2018 Elsevier Ltd. All rights reserved.

Designing A Mixed Methods Study In Primary Care

PubMed Central

Creswell, John W.; Fetters, Michael D.; Ivankova, Nataliya V.

2004-01-01

BACKGROUND Mixed methods or multimethod research holds potential for rigorous, methodologically sound investigations in primary care. The objective of this study was to use criteria from the literature to evaluate 5 mixed methods studies in primary care and to advance 3 models useful for designing such investigations. METHODS We first identified criteria from the social and behavioral sciences to analyze mixed methods studies in primary care research. We then used the criteria to evaluate 5 mixed methods investigations published in primary care research journals. RESULTS Of the 5 studies analyzed, 3 included a rationale for mixing based on the need to develop a quantitative instrument from qualitative data or to converge information to best understand the research topic. Quantitative data collection involved structured interviews, observational checklists, and chart audits that were analyzed using descriptive and inferential statistical procedures. Qualitative data consisted of semistructured interviews and field observations that were analyzed using coding to develop themes and categories. The studies showed diverse forms of priority: equal priority, qualitative priority, and quantitative priority. Data collection involved quantitative and qualitative data gathered both concurrently and sequentially. The integration of the quantitative and qualitative data in these studies occurred between data analysis from one phase and data collection from a subsequent phase, while analyzing the data, and when reporting the results. DISCUSSION We recommend instrument-building, triangulation, and data transformation models for mixed methods designs as useful frameworks to add rigor to investigations in primary care. We also discuss the limitations of our study and the need for future research. PMID:15053277

Electromagnetic stirring in a microbioreactor with non-conventional chamber morphology and implementation of multiplexed mixing.

PubMed

Tan, Christabel Kl; Davies, Matthew J; McCluskey, Daniel K; Munro, Ian R; Nweke, Mauryn C; Tracey, Mark C; Szita, Nicolas

2015-10-01

Microbioreactors have emerged as novel tools for early bioprocess development. Mixing lies at the heart of bioreactor operation (at all scales). The successful implementation of micro-stirring methods is thus central to the further advancement of microbioreactor technology. The aim of this study was to develop a micro-stirring method that aids robust microbioreactor operation and facilitates cost-effective parallelization. A microbioreactor was developed with a novel micro-stirring method involving the movement of a magnetic bead by sequenced activation of a ring of electromagnets. The micro-stirring method offers flexibility in chamber designs, and mixing is demonstrated in cylindrical, diamond and triangular shaped reactor chambers. Mixing was analyzed for different electromagnet on/off sequences; mixing times of 4.5 s, 2.9 s, and 2.5 s were achieved for cylindrical, diamond and triangular shaped chambers, respectively. Ease of micro-bubble free priming, a typical challenge of cylindrical shaped microbioreactor chambers, was obtained with a diamond-shaped chamber. Consistent mixing behavior was observed between the constituent reactors in a duplex system. A novel stirring method using electromagnetic actuation offering rapid mixing and easy integration with microbioreactors was characterized. The design flexibility gained enables fabrication of chambers suitable for microfluidic operation, and a duplex demonstrator highlights potential for cost-effective parallelization. Combined with a previously published cassette-like fabrication of microbioreactors, these advances will facilitate the development of robust and parallelized microbioreactors. © 2015 The Authors. Journal of Chemical Technology & Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Mixed Potentials: Experimental Illustrations of an Important Concept in Practical Electrochemistry.

ERIC Educational Resources Information Center

Power, G. P.; Ritchie, I. M.

1983-01-01

Presents a largely experimental approach to the concept of mixed potentials, pointing out the close parallel that exists between equilibrium potentials. Describes several important examples of mixed potentials, providing current-voltage and polarization curves and half reactions as examples. Includes a discussion of corrosion reactions and…

The use of "mixing" procedure of mixed methods in health services research.

PubMed

Zhang, Wanqing; Creswell, John

2013-08-01

Mixed methods research has emerged alongside qualitative and quantitative approaches as an important tool for health services researchers. Despite growing interest, among health services researchers, in using mixed methods designs, little has been done to identify the procedural aspects of doing so. To describe how mixed methods researchers mix the qualitative and quantitative aspects of their studies in health services research. We searched the PubMed for articles, using mixed methods in health services research, published between January 1, 2006 and December 30, 2010. We identified and reviewed 30 published health services research articles on studies in which mixed methods had been used. We selected 3 articles as illustrations to help health services researcher conceptualize the type of mixing procedures that they were using. Three main "mixing" procedures have been applied within these studies: (1) the researchers analyzed the 2 types of data at the same time but separately and integrated the results during interpretation; (2) the researchers connected the qualitative and quantitative portions in phases in such a way that 1 approach was built upon the findings of the other approach; and (3) the researchers mixed the 2 data types by embedding the analysis of 1 data type within the other. "Mixing" in mixed methods is more than just the combination of 2 independent components of the quantitative and qualitative data. The use of "mixing" procedure in health services research involves the integration, connection, and embedding of these 2 data components.

An empirical investigation of the efficiency effects of integrated care models in Switzerland

PubMed Central

Reich, Oliver; Rapold, Roland; Flatscher-Thöni, Magdalena

2012-01-01

Introduction This study investigates the efficiency gains of integrated care models in Switzerland, since these models are regarded as cost containment options in national social health insurance. These plans generate much lower average health care expenditure than the basic insurance plan. The question is, however, to what extent these total savings are due to the effects of selection and efficiency. Methods The empirical analysis is based on data from 399,274 Swiss residents that constantly had compulsory health insurance with the Helsana Group, the largest health insurer in Switzerland, covering the years 2006–2009. In order to evaluate the efficiency of the different integrated care models, we apply an econometric approach with a mixed-effects model. Results Our estimations indicate that the efficiency effects of integrated care models on health care expenditure are significant. However, the different insurance plans vary, revealing the following efficiency gains per model: contracted capitated model 21.2%, contracted non-capitated model 15.5% and telemedicine model 3.7%. The remaining 8.5%, 5.6% and 22.5%, respectively, of the variation in total health care expenditure can be attributed to the effects of selection. Conclusions Integrated care models have the potential to improve care for patients with chronic diseases and concurrently have a positive impact on health care expenditure. We suggest policy-makers improve the incentives for patients with chronic diseases within the existing regulations providing further potential for cost-efficiency of medical care. PMID:22371691

Accuracy Test of the OPLS-AA Force Field for Calculating Free Energies of Mixing and Comparison with PAC-MAC

PubMed Central

2017-01-01

We have calculated the excess free energy of mixing of 1053 binary mixtures with the OPLS-AA force field using two different methods: thermodynamic integration (TI) of molecular dynamics simulations and the Pair Configuration to Molecular Activity Coefficient (PAC-MAC) method. PAC-MAC is a force field based quasi-chemical method for predicting miscibility properties of various binary mixtures. The TI calculations yield a root mean squared error (RMSE) compared to experimental data of 0.132 kBT (0.37 kJ/mol). PAC-MAC shows a RMSE of 0.151 kBT with a calculation speed being potentially 1.0 × 104 times greater than TI. OPLS-AA force field parameters are optimized using PAC-MAC based on vapor–liquid equilibrium data, instead of enthalpies of vaporization or densities. The RMSE of PAC-MAC is reduced to 0.099 kBT by optimizing 50 force field parameters. The resulting OPLS-PM force field has a comparable accuracy as the OPLS-AA force field in the calculation of mixing free energies using TI. PMID:28418655

The role of simulation in mixed-methods research: a framework & application to patient safety.

PubMed

Guise, Jeanne-Marie; Hansen, Matthew; Lambert, William; O'Brien, Kerth

2017-05-04

Research in patient safety is an important area of health services research and is a national priority. It is challenging to investigate rare occurrences, explore potential causes, and account for the complex, dynamic context of healthcare - yet all are required in patient safety research. Simulation technologies have become widely accepted as education and clinical tools, but have yet to become a standard tool for research. We developed a framework for research that integrates accepted patient safety models with mixed-methods research approaches and describe the performance of the framework in a working example of a large National Institutes of Health (NIH)-funded R01 investigation. This worked example of a framework in action, identifies the strengths and limitations of qualitative and quantitative research approaches commonly used in health services research. Each approach builds essential layers of knowledge. We describe how the use of simulation ties these layers of knowledge together and adds new and unique dimensions of knowledge. A mixed-methods research approach that includes simulation provides a broad multi-dimensional approach to health services and patient safety research.

TTP AL921102: An integrated geophysics program for non-intrusive characterization of mixed-waste landfill sites. FY 1992 year-end progress report: Volume 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasbrouck, J.C.

1992-11-01

Chem-Nuclear Geotech, Inc. (Geotech), operating contractor for the US Department of Energy Grand Junction Projects Office, is conducting the Integrated Geophysics Program for Non-Intrusive Characterization of Mixed-Waste Landfill Sites (Technical Task Plan [TTP] AL921102). The TTP is part of the Mixed-Waste Landfill Integrated Demonstration (MWLID). The objective of this task was to demonstrate that an integrated program of surface geophysics can be used to effectively and nonintrusively characterize n-mixed-waste landfill sites. To accomplish this objective, integrated field demonstrations were conducted over two previously identified areas of interest (designated Areas A and B) within the MWLID test site at the Chemicalmore » Waste Landfill (CWL), Technical Area 3, at the Sandia National Laboratories, Albuquerque, New Mexico (Figures 1 and 2). Area A was centered roughly around the Chromic Acid and Organics Pits in the southeast-central portion of the landfill and Area B was centered around the ``60`s Pits`` area in the northeast-central portion of the landfill. Pit locations were known in Area A and suspected in Area B. This progress report describes the geophysical surveys conducted by Geotech and presents preliminary displays and analyses. Volume 2 of this report contains the raw data for all the surveys conducted by Geotech for this TTP.« less

TTP AL921102: An integrated geophysics program for non-intrusive characterization of mixed-waste landfill sites

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hasbrouck, J.C.

1992-11-01

Chem-Nuclear Geotech, Inc. (Geotech), operating contractor for the US Department of Energy Grand Junction Projects Office, is conducting the Integrated Geophysics Program for Non-Intrusive Characterization of Mixed-Waste Landfill Sites (Technical Task Plan [TTP] AL921102). The TTP is part of the Mixed-Waste Landfill Integrated Demonstration (MWLID). The objective of this task was to demonstrate that an integrated program of surface geophysics can be used to effectively and nonintrusively characterize n-mixed-waste landfill sites. To accomplish this objective, integrated field demonstrations were conducted over two previously identified areas of interest (designated Areas A and B) within the MWLID test site at the Chemicalmore » Waste Landfill (CWL), Technical Area 3, at the Sandia National Laboratories, Albuquerque, New Mexico (Figures 1 and 2). Area A was centered roughly around the Chromic Acid and Organics Pits in the southeast-central portion of the landfill and Area B was centered around the 60's Pits'' area in the northeast-central portion of the landfill. Pit locations were known in Area A and suspected in Area B. This progress report describes the geophysical surveys conducted by Geotech and presents preliminary displays and analyses. Volume 2 of this report contains the raw data for all the surveys conducted by Geotech for this TTP.« less

Estimation of the linear mixed integrated Ornstein–Uhlenbeck model

PubMed Central

Hughes, Rachael A.; Kenward, Michael G.; Sterne, Jonathan A. C.; Tilling, Kate

2017-01-01

ABSTRACT The linear mixed model with an added integrated Ornstein–Uhlenbeck (IOU) process (linear mixed IOU model) allows for serial correlation and estimation of the degree of derivative tracking. It is rarely used, partly due to the lack of available software. We implemented the linear mixed IOU model in Stata and using simulations we assessed the feasibility of fitting the model by restricted maximum likelihood when applied to balanced and unbalanced data. We compared different (1) optimization algorithms, (2) parameterizations of the IOU process, (3) data structures and (4) random-effects structures. Fitting the model was practical and feasible when applied to large and moderately sized balanced datasets (20,000 and 500 observations), and large unbalanced datasets with (non-informative) dropout and intermittent missingness. Analysis of a real dataset showed that the linear mixed IOU model was a better fit to the data than the standard linear mixed model (i.e. independent within-subject errors with constant variance). PMID:28515536

FY 17 Q1 Commercial integrated heat pump with thermal storage milestone report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abu-Heiba, Ahmad; Baxter, Van D.; Shen, Bo

2017-01-01

The commercial integrated heat pump with thermal storage (AS-IHP) offers significant energy saving over a baseline heat pump with electric water heater. The saving potential is maximized when the AS-IHP serves coincident high water heating and high space cooling demands. A previous energy performance analysis showed that the AS-IHP provides the highest benefit in the hot-humid and hot-dry/mixed dry climate regions. Analysis of technical potential energy savings for these climate zones based on the BTO Market calculator indicated that the following commercial building market segments had the highest water heating loads relative to space cooling and heating loads education, foodmore » service, health care, lodging, and mercantile/service. In this study, we focused on these building types to conservatively estimate the market potential of the AS-IHP. Our analysis estimates maximum annual shipments of ~522,000 units assuming 100% of the total market is captured. An early replacement market based on replacement of systems in target buildings between 15 and 35 years old was estimated at ~136,000 units. Technical potential energy savings are estimated at ~0.27 quad based on the maximum market estimate, equivalent to ~13.9 MM Ton CO2 emissions reduction.« less

Integrating Mixed Method Data in Psychological Research: Combining Q Methodology and Questionnaires in a Study Investigating Cultural and Psychological Influences on Adolescent Sexual Behavior

ERIC Educational Resources Information Center

Franz, Anke; Worrell, Marcia; Vögele, Claus

2013-01-01

In recent years, combining quantitative and qualitative research methods in the same study has become increasingly acceptable in both applied and academic psychological research. However, a difficulty for many mixed methods researchers is how to integrate findings consistently. The value of using a coherent framework throughout the research…

Mixed models and reduced/selective integration displacement models for nonlinear analysis of curved beams

NASA Technical Reports Server (NTRS)

Noor, A. K.; Peters, J. M.

1981-01-01

Simple mixed models are developed for use in the geometrically nonlinear analysis of deep arches. A total Lagrangian description of the arch deformation is used, the analytical formulation being based on a form of the nonlinear deep arch theory with the effects of transverse shear deformation included. The fundamental unknowns comprise the six internal forces and generalized displacements of the arch, and the element characteristic arrays are obtained by using Hellinger-Reissner mixed variational principle. The polynomial interpolation functions employed in approximating the forces are one degree lower than those used in approximating the displacements, and the forces are discontinuous at the interelement boundaries. Attention is given to the equivalence between the mixed models developed herein and displacement models based on reduced integration of both the transverse shear and extensional energy terms. The advantages of mixed models over equivalent displacement models are summarized. Numerical results are presented to demonstrate the high accuracy and effectiveness of the mixed models developed and to permit a comparison of their performance with that of other mixed models reported in the literature.

Integrated aeroelastic vibrator for fluid mixing in open microwells

NASA Astrophysics Data System (ADS)

Xia, H. M.; Jin, X.; Zhang, Y. Y.; Wu, J. W.; Zhang, J.; Wang, Z. P.

2018-01-01

Fluid mixing in micro-wells/chambers is required in a variety of biological and biochemical processes. However, mixing fluids of small volumes is usually difficult due to increased viscous effects. In this study, we propose a new method for mixing enhancement in microliter-scale open wells. A thin elastic diaphragm is used to seal the bottom of the mixing microwell, underneath which an air chamber connects an aeroelastic vibrator. Driven by an air flow, the vibrator produces self-excited vibrations and causes pressure oscillations in the air chamber. Then the elastic diaphragm is actuated to mix the fluids in the microwell. Two designs that respectively have one single well and 2  ×  2 wells were prototyped. Testing results show that for liquids with a volume ranging from 10-60 µl and viscosity ranging from 1-5 cP, complete mixing can be obtained within 5-20 s. Furthermore, the device is operable with an air micropump, and hence facilitating the miniaturization and integration of lab-on-a-chip and microbioreactor systems.

Sharing is caring: The potential of the sharing economy to support aging in place.

PubMed

Miller, Julie; Ward, Carley; Lee, Chaiwoo; D'Ambrosio, Lisa; Coughlin, Joseph

2018-01-24

This article explores innovative applications of sharing economy services that have the potential to support a population aging in place, especially the "oldest old," aged 85 and older, and their caregivers. A mixed-methods study conducted by the MIT AgeLab examined perceptions of and experiences with sharing economy services, ultimately finding opportunities and barriers to use. Thus, although sharing economy services have potential to support aging in place, to do so successfully will require reconstructing how older adults, family caregivers, aging service professionals, gerontology educators, and gerontology students conceptualize and deliver care to an aging population. We suggest examples for gerontology educators to integrate into their classrooms to further cultivate an appreciation among students of multiple approaches to intervention, including those that leverage sharing economy and technology-enabled platforms to support older adults and their caregivers.

[LONG-TERM SURVIVAL OF DUAL DISORDERS PATIENTS AFTER MIXED CARE IN DUAL DISORDERS AND STANDARD WARDS VERSUS CARE ONLY IN DUAL DISORDERS WARD].

PubMed

Gimelfarb, Yuri; Wolf, Aviva; Ben-Tzarfati, Mashit

2017-01-01

Dual disorders (co-occurring mental illness and substance abuse disorders in the same person) are extremely common among patients receiving mental health services. Integrated treatment has been proposed as the standard of care and it describes a flexible combination of treatments from the mental health and addiction fields that are blended together in the therapy. Scientific evidence for survival of dual disorders patients (DDPs), who had integrated dual disorders inpatient care, is lacking. To determine the long term survival rates following integrated care (Integrated Dual Diagnosis Treatment Ward [IDDTW] only) versus mixed care (IDDTW and psychiatric wards) during the life-time of DDPs. The charts of 333 subjects admitted to IDDTW during the period January 2002 - June 2006 were assessed at least 8 years after the first admission. Psychiatric diagnoses have been established and grouped according to international classification of diseases and health-related problems -10th edition (ICD-10). The Kaplan-Meier survival analysis was used to estimate the cumulative survival rates in all the subpopulations, and the predictive values of different variables were assessed by Cox proportional-hazards regression model. The total all-cause 12-year, unadjusted mortality was 21.1% in integrated care versus 24.6% in mixed care (p<.68). The Cox regression was not revealed for integrated care as a predictive factor for all-cause mortality. The findings showed that there was no consistent evidence to support integrated inpatient care over mixed care, as measured by long-term survival. More studies are required in order to address the challenges posed in the treatment of DDPs.

Searching for rigour in the reporting of mixed methods population health research: a methodological review.

PubMed

Brown, K M; Elliott, S J; Leatherdale, S T; Robertson-Wilson, J

2015-12-01

The environments in which population health interventions occur shape both their implementation and outcomes. Hence, when evaluating these interventions, we must explore both intervention content and context. Mixed methods (integrating quantitative and qualitative methods) provide this opportunity. However, although criteria exist for establishing rigour in quantitative and qualitative research, there is poor consensus regarding rigour in mixed methods. Using the empirical example of school-based obesity interventions, this methodological review examined how mixed methods have been used and reported, and how rigour has been addressed. Twenty-three peer-reviewed mixed methods studies were identified through a systematic search of five databases and appraised using the guidelines for Good Reporting of a Mixed Methods Study. In general, more detailed description of data collection and analysis, integration, inferences and justifying the use of mixed methods is needed. Additionally, improved reporting of methodological rigour is required. This review calls for increased discussion of practical techniques for establishing rigour in mixed methods research, beyond those for quantitative and qualitative criteria individually. A guide for reporting mixed methods research in population health should be developed to improve the reporting quality of mixed methods studies. Through improved reporting, mixed methods can provide strong evidence to inform policy and practice. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Mixed Methods Research Designs in Counseling Psychology

ERIC Educational Resources Information Center

Hanson, William E.; Creswell, John W.; Clark, Vicki L. Plano; Petska, Kelly S.; Creswell, David J.

2005-01-01

With the increased popularity of qualitative research, researchers in counseling psychology are expanding their methodologies to include mixed methods designs. These designs involve the collection, analysis, and integration of quantitative and qualitative data in a single or multiphase study. This article presents an overview of mixed methods…

Two Related Parametric Integrals

ERIC Educational Resources Information Center

Dana-Picard, T.

2007-01-01

Two related sequences of definite integrals are considered. By mixing hand-work, computer algebra system assistance and websurfing, fine connections can be studied between integrals and a couple of interesting sequences of integers. (Contains 4 tables.)

Preliminary mixed-layer model results for FIRE marine stratocumulus IFO conditions

NASA Technical Reports Server (NTRS)

Barlow, R.; Nicholls, S.

1990-01-01

Some preliminary results from the Turton and Nicholls mixed layer model using typical FIRE boundary conditions are presented. The model includes entrainment and drizzle parametrizations as well as interactive long and shortwave radiation schemes. A constraint on the integrated turbulent kinetic energy balance ensures that the model remains energetically consistent at all times. The preliminary runs were used to identify the potentially important terms in the heat and moisture budgets of the cloud layer, and to assess the anticipated diurnal variability. These are compared with typical observations from the C130. Sensitivity studies also revealed the remarkable stability of these cloud sheets: a number of negative feedback mechanisms appear to operate to maintain the cloud over an extended time period. These are also discussed. The degree to which such a modelling approach can be used to explain observed features, the specification of boundary conditions and problems of interpretation in non-horizontally uniform conditions is also raised.

Control of Aeromonas on minimally processed vegetables by decontamination with lactic acid, chlorinated water, or thyme essential oil solution.

PubMed

Uyttendaele, M; Neyts, K; Vanderswalmen, H; Notebaert, E; Debevere, J

2004-02-01

Aeromonas is an opportunistic pathogen, which, although in low numbers, may be present on minimally processed vegetables. Although the intrinsic and extrinsic factors of minimally processed prepacked vegetable mixes are not inhibitory to the growth of Aeromonas species, multiplication to high numbers during processing and storage of naturally contaminated grated carrots, mixed lettuce, and chopped bell peppers was not observed. Aeromonas was shown to be resistant towards chlorination of water, but was susceptible to 1% and 2% lactic acid and 0.5% and 1.0% thyme essential oil treatment, although the latter provoked adverse sensory properties when applied for decontamination of chopped bell peppers. Integration of a decontamination step with 2% lactic acid in the processing line of grated carrots was shown to have the potential to control the overall microbial quality of the grated carrots and was particularly effective towards Aeromonas.

Improved prediction of heat of mixing and segregation in metallic alloys using tunable mixing rule for embedded atom method

NASA Astrophysics Data System (ADS)

Divi, Srikanth; Agrahari, Gargi; Ranjan Kadulkar, Sanket; Kumar, Sanjeet; Chatterjee, Abhijit

2017-12-01

Capturing segregation behavior in metal alloy nanoparticles accurately using computer simulations is contingent upon the availability of high-fidelity interatomic potentials. The embedded atom method (EAM) potential is a widely trusted interatomic potential form used with pure metals and their alloys. When limited experimental data is available, the A-B EAM cross-interaction potential for metal alloys AxB 1-x are often constructed from pure metal A and B potentials by employing a pre-defined ‘mixing rule’ without any adjustable parameters. While this approach is convenient, we show that for AuPt, NiPt, AgAu, AgPd, AuNi, NiPd, PtPd and AuPd such mixing rules may not even yield the correct alloy properties, e.g., heats of mixing, that are closely related to the segregation behavior. A general theoretical formulation based on scaling invariance arguments is introduced that addresses this issue by tuning the mixing rule to better describe alloy properties. Starting with an existing pure metal EAM potential that is used extensively in literature, we find that the mixing rule fitted to heats of mixing for metal solutions usually provides good estimates of segregation energies, lattice parameters and cohesive energy, as well as equilibrium distribution of metals within a nanoparticle using Monte Carlo simulations. While the tunable mixing rule generally performs better than non-adjustable mixing rules, the use of the tunable mixing rule may still require some caution. For e.g., in Pt-Ni system we find that the segregation behavior can deviate from the experimentally observed one at Ni-rich compositions. Despite this the overall results suggest that the same approach may be useful for developing improved cross-potentials with other existing pure metal EAM potentials as well. As a further test of our approach, mixing rule estimated from binary data is used to calculate heat of mixing in AuPdPt, AuNiPd, AuPtNi, AgAuPd and NiPtPd. Excellent agreement with experiments is observed for AuPdPt.

Property-Based Monitoring of Analog and Mixed-Signal Systems

NASA Astrophysics Data System (ADS)

Havlicek, John; Little, Scott; Maler, Oded; Nickovic, Dejan

In the recent past, there has been a steady growth of the market for consumer embedded devices such as cell phones, GPS and portable multimedia systems. In embedded systems, digital, analog and software components are combined on a single chip, resulting in increasingly complex designs that introduce richer functionality on smaller devices. As a consequence, the potential insertion of errors into a design becomes higher, yielding an increasing need for automated analog and mixed-signal validation tools. In the purely digital setting, formal verification based on properties expressed in industrial specification languages such as PSL and SVA is nowadays successfully integrated in the design flow. On the other hand, the validation of analog and mixed-signal systems still largely depends on simulation-based, ad-hoc methods. In this tutorial, we consider some ingredients of the standard verification methodology that can be successfully exported from digital to analog and mixed-signal setting, in particular property-based monitoring techniques. Property-based monitoring is a lighter approach to the formal verification, where the system is seen as a "black-box" that generates sets of traces, whose correctness is checked against a property, that is its high-level specification. Although incomplete, monitoring is effectively used to catch faults in systems, without guaranteeing their full correctness.

Reducing Physical Risk Factors in Construction Work Through a Participatory Intervention: Protocol for a Mixed-Methods Process Evaluation.

PubMed

Ajslev, Jeppe; Brandt, Mikkel; Møller, Jeppe Lykke; Skals, Sebastian; Vinstrup, Jonas; Jakobsen, Markus Due; Sundstrup, Emil; Madeleine, Pascal; Andersen, Lars Louis

2016-05-26

Previous research has shown that reducing physical workload among workers in the construction industry is complicated. In order to address this issue, we developed a process evaluation in a formative mixed-methods design, drawing on existing knowledge of the potential barriers for implementation. We present the design of a mixed-methods process evaluation of the organizational, social, and subjective practices that play roles in the intervention study, integrating technical measurements to detect excessive physical exertion measured with electromyography and accelerometers, video documentation of working tasks, and a 3-phased workshop program. The evaluation is designed in an adapted process evaluation framework, addressing recruitment, reach, fidelity, satisfaction, intervention delivery, intervention received, and context of the intervention companies. Observational studies, interviews, and questionnaires among 80 construction workers organized in 20 work gangs, as well as health and safety staff, contribute to the creation of knowledge about these phenomena. At the time of publication, the process of participant recruitment is underway. Intervention studies are challenging to conduct and evaluate in the construction industry, often because of narrow time frames and ever-changing contexts. The mixed-methods design presents opportunities for obtaining detailed knowledge of the practices intra-acting with the intervention, while offering the opportunity to customize parts of the intervention.

Sensitivity of the two-dimensional shearless mixing layer to the initial turbulent kinetic energy and integral length scale

NASA Astrophysics Data System (ADS)

Fathali, M.; Deshiri, M. Khoshnami

2016-04-01

The shearless mixing layer is generated from the interaction of two homogeneous isotropic turbulence (HIT) fields with different integral scales ℓ1 and ℓ2 and different turbulent kinetic energies E1 and E2. In this study, the sensitivity of temporal evolutions of two-dimensional, incompressible shearless mixing layers to the parametric variations of ℓ1/ℓ2 and E1/E2 is investigated. The sensitivity methodology is based on the nonintrusive approach; using direct numerical simulation and generalized polynomial chaos expansion. The analysis is carried out at Reℓ 1=90 for the high-energy HIT region and different integral length scale ratios 1 /4 ≤ℓ1/ℓ2≤4 and turbulent kinetic energy ratios 1 ≤E1/E2≤30 . It is found that the most influential parameter on the variability of the mixing layer evolution is the turbulent kinetic energy while variations of the integral length scale show a negligible influence on the flow field variability. A significant level of anisotropy and intermittency is observed in both large and small scales. In particular, it is found that large scales have higher levels of intermittency and sensitivity to the variations of ℓ1/ℓ2 and E1/E2 compared to the small scales. Reconstructed response surfaces of the flow field intermittency and the turbulent penetration depth show monotonic dependence on ℓ1/ℓ2 and E1/E2 . The mixing layer growth rate and the mixing efficiency both show sensitive dependence on the initial condition parameters. However, the probability density function of these quantities shows relatively small solution variations in response to the variations of the initial condition parameters.

Optimized holographic femtosecond laser patterning method towards rapid integration of high-quality functional devices in microchannels

PubMed Central

Zhang, Chenchu; Hu, Yanlei; Du, Wenqiang; Wu, Peichao; Rao, Shenglong; Cai, Ze; Lao, Zhaoxin; Xu, Bing; Ni, Jincheng; Li, Jiawen; Zhao, Gang; Wu, Dong; Chu, Jiaru; Sugioka, Koji

2016-01-01

Rapid integration of high-quality functional devices in microchannels is in highly demand for miniature lab-on-a-chip applications. This paper demonstrates the embellishment of existing microfluidic devices with integrated micropatterns via femtosecond laser MRAF-based holographic patterning (MHP) microfabrication, which proves two-photon polymerization (TPP) based on spatial light modulator (SLM) to be a rapid and powerful technology for chip functionalization. Optimized mixed region amplitude freedom (MRAF) algorithm has been used to generate high-quality shaped focus field. Base on the optimized parameters, a single-exposure approach is developed to fabricate 200 × 200 μm microstructure arrays in less than 240 ms. Moreover, microtraps, QR code and letters are integrated into a microdevice by the advanced method for particles capture and device identification. These results indicate that such a holographic laser embellishment of microfluidic devices is simple, flexible and easy to access, which has great potential in lab-on-a-chip applications of biological culture, chemical analyses and optofluidic devices. PMID:27619690

Building Bridges to Integrate Care (BRIDGES): Incubating Health Service Innovation across the Continuum of Care for Patients with Multiple Chronic Conditions.

PubMed

Bhattacharyya, Onil; Schull, Michael; Shojania, Kaveh; Stergiopoulos, Vicky; Naglie, Gary; Webster, Fiona; Brandao, Ricardo; Mohammed, Tamara; Christian, Jennifer; Hawker, Gillian; Wilson, Lynn; Levinson, Wendy

2016-01-01

Integrating care for people with complex needs is challenging. Indeed, evidence of solutions is mixed, and therefore, well-designed, shared evaluation approaches are needed to create cumulative learning. The Toronto-based Building Bridges to Integrate Care (BRIDGES) collaborative provided resources to refine and test nine new models linking primary, hospital and community care. It used mixed methods, a cross-project meta-evaluation and shared outcome measures. Given the range of skills required to develop effective interventions, a novel incubator was used to test and spread opportunities for system integration that included operational expertise and support for evaluation and process improvement.

24 CFR 891.125 - Site and neighborhood standards.

Code of Federal Regulations, 2011 CFR

2011-04-01

... as permitted under paragraph (c)(2) of this section, and must not be located in a racially mixed area... to the racial mix of the locality's population. (ii) Units may be considered to be comparable... racial mix of the eligible population. (C) There are racially integrated neighborhoods in the locality...

Mixed Methods in Intervention Research: Theory to Adaptation

ERIC Educational Resources Information Center

Nastasi, Bonnie K.; Hitchcock, John; Sarkar, Sreeroopa; Burkholder, Gary; Varjas, Kristen; Jayasena, Asoka

2007-01-01

The purpose of this article is to demonstrate the application of mixed methods research designs to multiyear programmatic research and development projects whose goals include integration of cultural specificity when generating or translating evidence-based practices. The authors propose a set of five mixed methods designs related to different…

Integrative Approach for Producing Hydrogen and Polyhydroxyalkanoate from Mixed Wastes of Biological Origin.

PubMed

Patel, Sanjay K S; Lee, Jung-Kul; Kalia, Vipin C

2016-09-01

In this study, an integrative approach to produce biohydrogen (H2) and polyhydroxyalkanoates (PHA) from the wastes of biological origin was investigated. A defined set of mixed cultures was used for hydrolysis and the hydrolysates were used to produce H2. The effluent from H2 production stage was used for PHA production. Under batch culture, a maximum of 62 l H2/kg of pure potato peels (Total solid, TS 2 %, w/v) and 54 l H2/kg of mixed biowastes (MBW1) was recorded. Using effluent from the H2 production stage of biowaste mixture (MBW1), Bacillus cereus EGU43 could produce 195 mg PHA/l and 15.6 % (w/w). Further, supplementation of GM-2 medium (0.1×) and glucose (0.5 %) in H2 production stage effluents, resulted in significant improvements of up to 11 and 41.7 % of PHA contents, respectively. An improvement of 3.9- and 17-fold in PHA yields as compared to with and without integrative H2 production from the MBW1 has been recorded. This integrative approach seems to be a suitable process to improve the yields of H2 and PHA by mixing biowastes.

pi-eta mixing and charge symmetry violating NN potential in matter

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biswas, Subhrajyoti; Roy, Pradip; Dutt-Mazumder, Abhee K.

2010-06-15

We construct density-dependent class III charge symmetry violating (CSV) potential caused by the mixing of pi-eta mesons with off-shell corrections. The density dependence enters through the nonvanishing pi-eta mixing driven by both the neutron-proton mass difference and their asymmetric density distribution. The contribution of density-dependent mixing to the CSV potential is found to be appreciably larger than that of the vacuum part.

Automated Design Tools for Integrated Mixed-Signal Microsystems (NeoCAD)

DTIC Science & Technology

2005-02-01

method, Model Order Reduction (MOR) tools, system-level, mixed-signal circuit synthesis and optimization tools, and parsitic extraction tools. A unique...Mission Area: Command and Control mixed signal circuit simulation parasitic extraction time-domain simulation IC design flow model order reduction... Extraction 1.2 Overall Program Milestones CHAPTER 2 FAST TIME DOMAIN MIXED-SIGNAL CIRCUIT SIMULATION 2.1 HAARSPICE Algorithms 2.1.1 Mathematical Background

A mixed methods protocol to evaluate the effect and cost-effectiveness of an Integrated electronic Diagnosis Approach (IeDA) for the management of childhood illnesses at primary health facilities in Burkina Faso.

PubMed

Blanchet, Karl; Lewis, James J; Pozo-Martin, Francisco; Satouro, Arsene; Somda, Serge; Ilboudo, Patrick; Sarrassat, Sophie; Cousens, Simon

2016-08-04

Burkina Faso introduced the Integrated Management of Childhood Illnesses (IMCI) strategy in 2003. However, an evaluation conducted in 2013 found that only 28 % of children were assessed for three danger signs as recommended by IMCI, and only 15 % of children were correctly classified. About 30 % of children were correctly prescribed with an antibiotic for suspected pneumonia or oral rehydration salts (ORS) for diarrhoea, and 40 % were correctly referred. Recent advances in information and communication technologies (ICT) and use of electronic clinical protocols hold the potential to transform healthcare delivery in low-income countries. However, no evidence is available on the effect of ICT on adherence to IMCI. This paper describes the research protocol of a mixed methods study that aims to measure the effect of the Integrated electronic Diagnosis Approach innovation (an electronic IMCI protocol provided to nurses) in two regions of Burkina Faso. The study combines a stepped-wedge trial, a realistic evaluation and an economic study in order to capture the effect of the innovation after its introduction on the level of adherence, cost and acceptability. The main challenge is to interconnect the three substudies. In integrating outcome, process and cost data, we focus on three key questions: (i) How does the effectiveness and the cost of the intervention vary by type of health worker and type of health centre? (ii) What is the impact of changes in the content, coverage and quality of the IeDA intervention on adherence and cost-effectiveness? (iii) What mechanisms of change (including costs) might explain the relationship between the IeDA intervention and adherence? Clinicaltrials.gov, NCT02341469 .

Data management in clinical research: Synthesizing stakeholder perspectives.

PubMed

Johnson, Stephen B; Farach, Frank J; Pelphrey, Kevin; Rozenblit, Leon

2016-04-01

This study assesses data management needs in clinical research from the perspectives of researchers, software analysts and developers. This is a mixed-methods study that employs sublanguage analysis in an innovative manner to link the assessments. We performed content analysis using sublanguage theory on transcribed interviews conducted with researchers at four universities. A business analyst independently extracted potential software features from the transcriptions, which were translated into the sublanguage. This common sublanguage was then used to create survey questions for researchers, analysts and developers about the desirability and difficulty of features. Results were synthesized using the common sublanguage to compare stakeholder perceptions with the original content analysis. Individual researchers exhibited significant diversity of perspectives that did not correlate by role or site. Researchers had mixed feelings about their technologies, and sought improvements in integration, interoperability and interaction as well as engaging with study participants. Researchers and analysts agreed that data integration has higher desirability and mobile technology has lower desirability but disagreed on the desirability of data validation rules. Developers agreed that data integration and validation are the most difficult to implement. Researchers perceive tasks related to study execution, analysis and quality control as highly strategic, in contrast with tactical tasks related to data manipulation. Researchers have only partial technologic support for analysis and quality control, and poor support for study execution. Software for data integration and validation appears critical to support clinical research, but may be expensive to implement. Features to support study workflow, collaboration and engagement have been underappreciated, but may prove to be easy successes. Software developers should consider the strategic goals of researchers with regard to the overall coordination of research projects and teams, workflow connecting data collection with analysis and processes for improving data quality. Copyright © 2016 Elsevier Inc. All rights reserved.

Importance of mixed methods in pragmatic trials and dissemination and implementation research.

PubMed

Albright, Karen; Gechter, Katherine; Kempe, Allison

2013-01-01

With increased attention to the importance of translating research to clinical practice and policy, recent years have seen a proliferation of particular types of research, including pragmatic trials and dissemination and implementation research. Such research seeks to understand how and why interventions function in real-world settings, as opposed to highly controlled settings involving conditions not likely to be repeated outside the research study. Because understanding the context in which interventions are implemented is imperative for effective pragmatic trials and dissemination and implementation research, the use of mixed methods is critical to understanding trial results and the success or failure of implementation efforts. This article discusses a number of dimensions of mixed methods research, utilizing at least one qualitative method and at least one quantitative method, that may be helpful when designing projects or preparing grant proposals. Although the strengths and emphases of qualitative and quantitative approaches differ substantially, methods may be combined in a variety of ways to achieve a deeper level of understanding than can be achieved by one method alone. However, researchers must understand when and how to integrate the data as well as the appropriate order, priority, and purpose of each method. The ability to demonstrate an understanding of the rationale for and benefits of mixed methods research is increasingly important in today's competitive funding environment, and many funding agencies now expect applicants to include mixed methods in proposals. The increasing demand for mixed methods research necessitates broader methodological training and deepened collaboration between medical, clinical, and social scientists. Although a number of challenges to conducting and disseminating mixed methods research remain, the potential for insight generated by such work is substantial. Copyright © 2013 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

The microbiome as engineering tool: Manufacturing and trading between microorganisms.

PubMed

De Vrieze, Jo; Christiaens, Marlies E R; Verstraete, Willy

2017-10-25

The integration of microbial technologies within the framework of the water-energy nexus has been taking place for over a century, but these mixed microbial communities are considered hard to deal with 'black boxes'. Process steering is mainly based on avoiding process failure by monitoring conventional parameters, e.g., pH and temperature, which often leads to operation far below the intrinsic potential. Mixed microbial communities do not reflect a randomised individual mix, but an interacting microbiological entity. Advance monitoring to obtain effective engineering of the microbiome is achievable, and even crucial to obtain the desired performance and products. This can be achieved via a top-down or bottom-up approach. The top-down strategy is reflected in the microbial resource management concept that considers the microbial community as a well-structured network. This network can be monitored by means of molecular techniques that will allow the development of accurate and quick decision tools. In contrast, the bottom-up approach makes use of synthetic cultures that can be composed starting from defined axenic cultures, based on the requirements of the process under consideration. The success of both approaches depends on real-time monitoring and control. Of particular importance is the necessity to identify and characterise the key players in the process. These key players not only relate with the establishment of functional conversions, but also with the interaction between partner bacteria. This emphasises the importance of molecular (screening) techniques to obtain structural and functional insights, minimise energy input, and maximise product output by means of integrated microbiome processes. Copyright © 2017 Elsevier B.V. All rights reserved.

Mechanisms and drivers of social inequality in phase II cardiac rehabilitation attendance: A Convergent Mixed Methods study.

PubMed

Pedersen, Maria; Overgaard, Dorthe; Andersen, Ingelise; Baastrup, Marie; Egerod, Ingrid

2018-05-17

To explore the extent to which the qualitative and quantitative data converge and explain mechanisms and drivers of social inequality in cardiac rehabilitation attendance. Social inequality in cardiac rehabilitation attendance has been a recognized problem for many years. However, to date the mechanisms driving these inequalities are still not fully understood. The study was designed as a convergent mixed methods study. From March 2015 - March 2016, patients hospitalized with acute coronary syndrome to two Danish regional hospitals were included in a quantitative prospective observational study (N=302). Qualitative interview informants (N=24) were sampled from the quantitative study population and half brought a close relative (N=12) for dyadic interviews. Interviews were conducted from August 2015 to February 2016. Integrated analyses were conducted in joint displays by merging the quantitative and qualitative findings. Qualitative and quantitative findings primarily confirmed and expanded each other; however, discordant results were also evident. Integrated analyses identified socially differentiated lifestyles, health beliefs, travel barriers and self-efficacy as potential drivers of social inequality in cardiac rehabilitation. Our study adds empirical evidence regarding how a mixed methods study can be used to obtain an understanding of complex healthcare problems. The study provides new knowledge concerning the mechanisms driving social inequality in cardiac rehabilitation attendance. To prevent social inequality, cardiac rehabilitation should be accommodated to patients with a history of unhealthy behaviour and low self-efficacy. Additionally, the rehabilitation programme should be offered in locations not requiring a long commute. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

Enthalpy of mixing of liquid Co–Sn alloys

PubMed Central

Yakymovych, A.; Fürtauer, S.; Elmahfoudi, A.; Ipser, H.; Flandorfer, H.

2014-01-01

A literature overview of enthalpy of mixing data for liquid Co–Sn alloys shows large scattering but no clear temperature dependence. Therefore drop calorimetry was performed in the Co–Sn system at twelve different temperatures in 100 K steps in the temperature range (673 to 1773) K. The integral enthalpy of mixing was determined starting from 1173 K and fitted to a standard Redlich–Kister polynomial. In addition, the limiting partial molar enthalpy of Co in Sn was investigated by small additions of Co to liquid Sn at temperatures (673 to 1773) K. The integral and partial molar enthalpies of the Co–Sn system generally show an exothermic mixing behavior. Significant temperature dependence was detected for the enthalpies of mixing. The minimum integral enthalpy values vary with rising temperature from approx. −7820 J/mol at T = 1173 K to −1350 J/mol at T = 1773 K; the position of the minimum is between (59 and 61) at.% Co. The results are discussed and compared with literature data available for this system. X-ray studies and scanning electron microscopy of selected alloys obtained from the calorimetric measurements were carried out in order to check the completeness of the solution process. PMID:24994940

Visuo-Haptic Mixed Reality with Unobstructed Tool-Hand Integration.

PubMed

Cosco, Francesco; Garre, Carlos; Bruno, Fabio; Muzzupappa, Maurizio; Otaduy, Miguel A

2013-01-01

Visuo-haptic mixed reality consists of adding to a real scene the ability to see and touch virtual objects. It requires the use of see-through display technology for visually mixing real and virtual objects, and haptic devices for adding haptic interaction with the virtual objects. Unfortunately, the use of commodity haptic devices poses obstruction and misalignment issues that complicate the correct integration of a virtual tool and the user's real hand in the mixed reality scene. In this work, we propose a novel mixed reality paradigm where it is possible to touch and see virtual objects in combination with a real scene, using commodity haptic devices, and with a visually consistent integration of the user's hand and the virtual tool. We discuss the visual obstruction and misalignment issues introduced by commodity haptic devices, and then propose a solution that relies on four simple technical steps: color-based segmentation of the hand, tracking-based segmentation of the haptic device, background repainting using image-based models, and misalignment-free compositing of the user's hand. We have developed a successful proof-of-concept implementation, where a user can touch virtual objects and interact with them in the context of a real scene, and we have evaluated the impact on user performance of obstruction and misalignment correction.

Exploring the potential of a family-based prevention intervention to reduce alcohol use and violence within HIV-affected families in Rwanda.

PubMed

Chaudhury, Sumona; Brown, Felicity L; Kirk, Catherine M; Mukunzi, Sylvere; Nyirandagijimana, Beatha; Mukandanga, Josee; Ukundineza, Christian; Godfrey, Kalisa; Ng, Lauren C; Brennan, Robert T; Betancourt, Theresa S

2016-03-01

HIV-affected families report higher rates of harmful alcohol use, intimate partner violence (IPV) and family conflict, which can have detrimental effects on children. Few evidence-based interventions exist to address these complex issues in Sub-Saharan Africa. This mixed methods study explores the potential of a family-based intervention to reduce IPV, family conflict and problems related to alcohol use to promote child mental health and family functioning within HIV-affected families in post-genocide Rwanda. A family home-visiting, evidence-based intervention designed to identify and enhance resilience and communication in families to promote mental health in children was adapted and developed for use in this context for families affected by caregiver HIV in Rwanda. The intervention was adapted and developed through a series of pilot study phases prior to being tested in open and randomized controlled trials (RCTs) in Rwanda for families affected by caregiver HIV. Quantitative and qualitative data from the RCT are explored here using a mixed methods approach to integrate findings. Reductions in alcohol use and IPV among caregivers are supported by qualitative reports of improved family functioning, lower levels of violence and problem drinking as well as improved child mental health, among the intervention group. This mixed methods analysis supports the potential of family-based interventions to reduce adverse caregiver behaviors as a major mechanism for improving child well-being. Further studies to examine these mechanisms in well-powered trials are needed to extend the evidence-base on the promise of family-based intervention for use in low- and middle-income countries.

Characterization of NiFe oxyhydroxide electrocatalysts by integrated electronic structure calculations and spectroelectrochemistry

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldsmith, Zachary K.; Harshan, Aparna K.; Gerken, James B.

2017-03-06

NiFe oxyhydroxide materials are highly active electrocatalysts for the oxygen evolution reaction (OER), an important process for carbon-neutral energy storage. Recent spectroscopic and computational studies increasingly support iron as the site of catalytic activity but differ with respect to the relevant iron redox state. A combination of hybrid periodic density functional theory calculations and spectroelectrochemical experiments elucidate the electronic structure and redox thermodynamics of Ni-only and mixed NiFe oxyhydroxide thin-film electrocatalysts. The UV/visible light absorbance of the Ni-only catalyst depends on the applied potential as metal ions in the film are oxidized before the onset of OER activity. In contrast,more » absorbance changes are negligible in a 25% Fe-doped catalyst up to the onset of OER activity. First-principles calculations of proton-coupled redox potentials and magnetizations reveal that the Ni-only system features oxidation of Ni2+ to Ni3+, followed by oxidation to a mixed Ni3+/4+ state at a potential coincident with the onset of OER activity. Calculations on the 25% Fedoped system show the catalyst is redox inert before the onset of catalysis, which coincides with the formation of Fe4+ and mixed Ni oxidation states. The calculations indicate that introduction of Fe dopants changes the character of the conduction band minimum from Ni-oxide in the Ni-only to predominantly Fe-oxide in the NiFe electrocatalyst. These findings provide a unified experimental and theoretical description of the electrochemical and optical properties of Ni and NiFe oxyhydroxide electrocatalysts and serve as an important benchmark for computational characterization of mixedmetal oxidation states in heterogeneous catalysts.« less

A serpentine laminating micromixer combining splitting/recombination and advection.

PubMed

Kim, Dong Sung; Lee, Se Hwan; Kwon, Tai Hun; Ahn, Chong H

2005-07-01

Mixing enhancement has drawn great attention from designers of micromixers, since the flow in a microchannel is usually characterized by a low Reynolds number (Re) which makes the mixing quite a difficult task to accomplish. In this paper, a novel integrated efficient micromixer named serpentine laminating micromixer (SLM) has been designed, simulated, fabricated and fully characterized. In the SLM, a high level of efficient mixing can be achieved by combining two general chaotic mixing mechanisms: splitting/recombination and chaotic advection. The splitting and recombination (in other terms, lamination) mechanism is obtained by the successive arrangement of "F"-shape mixing units in two layers. The advection is induced by the overall three-dimensional serpentine path of the microchannel. The SLM was realized by SU-8 photolithography, nickel electroplating, injection molding and thermal bonding. Mixing performance of the SLM was fully characterized numerically and experimentally. The numerical mixing simulations show that the advection acts favorably to realize the ideal vertical lamination of fluid flow. The mixing experiments based on an average mixing color intensity change of phenolphthalein show a high level of mixing performance was obtained with the SLM. Numerical and experimental results confirm that efficient mixing is successfully achieved from the SLM over the wide range of Re. Due to the simple and mass producible geometry of the efficient micromixer, SLM proposed in this study, the SLM can be easily applied to integrated microfluidic systems, such as micro-total-analysis-systems or lab-on-a-chip systems.

Monitoring the Productivity of Coastal Systems Using PH ...

EPA Pesticide Factsheets

The impact of nutrient inputs to the eutrophication of coastal ecosystems has been one of the great themes of coastal ecology. There have been countless studies devoted to quantifying how human sources of nutrients, in particular nitrogen (N), effect coastal water bodies. These studies, which often measure in situ concentrations of nutrients, chlorophyll, and dissolved oxygen, are often spatially and/or temporally intensive and expensive. We provide evidence from experimental mesocosms, coupled with data from the water column of a well-mixed estuary, that pH can be a quick, inexpensive, and integrative measure of net ecosystem metabolism. In some cases, this approach is a more sensitive tracer of production than direct measurements of chlorophyll and carbon-14. Taken together, our data suggest that pH is a sensitive, but often overlooked, tool for monitoring estuarine production. This presentation will explore the potential utility of pH as an indicator of ecosystem productivity. Our data suggest that pH is a sensitive and potentially integrator of net ecosystem production. It should not be overlooked, that measuring pH is quick, easy, and inexpensive, further increasing its value as an analytical tool.

Case Mix Management Systems: An Opportunity to Integrate Medical Records and Financial Management System Data Bases

PubMed Central

Rusnak, James E.

1987-01-01

Due to previous systems selections, many hospitals (health care facilities) are faced with the problem of fragmented data bases containing clinical, demographic and financial information. Projects to select and implement a Case Mix Management System (CMMS) provide an opportunity to reduce the number of separate physical files and to migrate towards systems with an integrated data base. The number of CMMS candidate systems is often restricted due to data base and system interface issues. The hospital must insure the CMMS project provides a means to implement an integrated on-line hospital information data base for use by departments in operating under a DRG-based Prospective Payment System. This paper presents guidelines for use in selecting a Case Mix Mangement System to meet the hospital's financial and operations planning, budgeting, marketing, and other management needs, while considering the data base implications of the implementation.

MILP model for integrated balancing and sequencing mixed-model two-sided assembly line with variable launching interval and assignment restrictions

NASA Astrophysics Data System (ADS)

Azmi, N. I. L. Mohd; Ahmad, R.; Zainuddin, Z. M.

2017-09-01

This research explores the Mixed-Model Two-Sided Assembly Line (MMTSAL). There are two interrelated problems in MMTSAL which are line balancing and model sequencing. In previous studies, many researchers considered these problems separately and only few studied them simultaneously for one-sided line. However in this study, these two problems are solved simultaneously to obtain more efficient solution. The Mixed Integer Linear Programming (MILP) model with objectives of minimizing total utility work and idle time is generated by considering variable launching interval and assignment restriction constraint. The problem is analysed using small-size test cases to validate the integrated model. Throughout this paper, numerical experiment was conducted by using General Algebraic Modelling System (GAMS) with the solver CPLEX. Experimental results indicate that integrating the problems of model sequencing and line balancing help to minimise the proposed objectives function.

Sample injection and electrophoretic separation on a simple laminated paper based analytical device.

PubMed

Xu, Chunxiu; Zhong, Minghua; Cai, Longfei; Zheng, Qingyu; Zhang, Xiaojun

2016-02-01

We described a strategy to perform multistep operations on a simple laminated paper-based separation device by using electrokinetic flow to manipulate the fluids. A laminated crossed-channel paper-based separation device was fabricated by cutting a filter paper sheet followed by lamination. Multiple function units including sample loading, sample injection, and electrophoretic separation were integrated on a single paper based analytical device for the first time, by applying potential at different reservoirs for sample, sample waste, buffer, and buffer waste. As a proof-of-concept demonstration, mixed sample solution containing carmine and sunset yellow were loaded in the sampling channel, and then injected into separation channel followed by electrophoretic separation, by adjusting the potentials applied at the four terminals of sampling and separation channel. The effects of buffer pH, buffer concentration, channel width, and separation time on resolution of electrophoretic separation were studied. This strategy may be used to perform multistep operations such as reagent dilution, sample injection, mixing, reaction, and separation on a single microfluidic paper based analytical device, which is very attractive for building micro total analysis systems on microfluidic paper based analytical devices. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Levels of Valence

PubMed Central

Shuman, Vera; Sander, David; Scherer, Klaus R.

2013-01-01

The distinction between the positive and the negative is fundamental in our emotional life. In appraisal theories, in particular in the component process model of emotion (Scherer, 1984, 2010), qualitatively different types of valence are proposed based on appraisals of (un)pleasantness, goal obstructiveness/conduciveness, low or high power, self-(in)congruence, and moral badness/goodness. This multifaceted conceptualization of valence is highly compatible with the frequent observation of mixed feelings in real life. However, it seems to contradict the one-dimensional conceptualization of valence often encountered in psychological theories, and the notion of valence as a common currency used to explain choice behavior. Here, we propose a framework to integrate the seemingly disparate conceptualizations of multifaceted valence and one-dimensional valence by suggesting that valence should be conceived at different levels, micro and macro. Micro-valences correspond to qualitatively different types of evaluations, potentially resulting in mixed feelings, whereas one-dimensional macro-valence corresponds to an integrative “common currency” to compare alternatives for choices. We propose that conceptualizing levels of valence may focus research attention on the mechanisms that relate valence at one level (micro) to valence at another level (macro), leading to new hypotheses, and addressing various concerns that have been raised about the valence concept, such as the valence-emotion relation. PMID:23717292

The influence of day care centres for people with dementia on family caregivers: an integrative review of the literature.

PubMed

Tretteteig, Signe; Vatne, Solfrid; Rokstad, Anne Marie Mork

2016-01-01

Day care centres (DCC) for people with dementia (PWD) have received increased attention recently, due to a shift in policy from the use of residential care towards home-based services. The aim of this study is to provide an extended understanding of the influence of DCCs on family caregivers (FCs). An integrative review including 19 studies was used: qualitative (n = 2), quantitative non-randomised (n = 8), quantitative descriptive studies (n = 7), and with mixed-method design (n = 2). The quality of the studies was evaluated by the mixed-methods appraisal tool (MMAT). FC experienced the DCC both as a respite service, and to some extent as a support service, improving their competence in caring for the PWD. The quality of the DCC influenced its use, and the FC's motivation to care for the PWD. FC's gender, role, individual needs, PWD behavioural problems and need for assistance played an important role. As a respite and support service, DCCs have the potential to give FCs a feeling of safety and relief, reduce the caregiver's burden, and increase their motivation towards their role as caregivers. These outcomes depend on the quality of treatment, and how the service meets the FC's needs for flexibility, support, information, and responsibility sharing.

Integrating terrestrial through aquatic processing of water, carbon and nitrogen over hot, cold and lukewarm moments in mixed land use catchments

NASA Astrophysics Data System (ADS)

Band, L. E.; Lin, L.; Duncan, J. M.

2017-12-01

A major challenge in understanding and managing freshwater volumes and quality in mixed land use catchments is the detailed heterogeneity of topography, soils, canopy, and inputs of water and biogeochemicals. The short space and time scale dynamics of sources, transport and processing of water, carbon and nitrogen in natural and built environments can have a strong influence on the timing and magnitude of watershed runoff and nutrient production, ecosystem cycling and export. Hydroclimate variability induces a functional interchange of terrestrial and aquatic environments across their transition zone with the temporal and spatial expansion and contraction of soil wetness, standing and flowing water over seasonal, diurnal and storm event time scales. Variation in sources and retention of nutrients at these scales need to be understood and represented to design optimal mitigation strategies. This paper discusses the conceptual framework used to design both simulation and measurement approaches, and explores these dynamics using an integrated terrestrial-aquatic watershed model of coupled water-carbon-nitrogen processes at resolutions necessary to resolve "hot spot/hot moment" phenomena in two well studied catchments in Long Term Ecological Research sites. The potential utility of this approach for design and assessment of urban green infrastructure and stream restoration strategies is illustrated.

Do attitudes and behavior of health care professionals exacerbate health care disparities among immigrant and ethnic minority groups? An integrative literature review.

PubMed

Drewniak, Daniel; Krones, Tanja; Wild, Verina

2017-05-01

Recent investigations of ethnicity related disparities in health care have focused on the contribution of providers' implicit biases. A significant effect on health care outcomes is suggested, but the results are mixed. The purpose of this integrative literature review is to provide an overview and synthesize the current empirical research on the potential influence of health care professionals' attitudes and behaviors towards ethnic minority patients on health care disparities. Integrative literature review. Four internet-based literature indexes - MedLine, PsychInfo, Sociological Abstracts and Web of Science - were searched for articles published between 1982 and 2012 discussing health care professionals' attitudes or behaviors towards ethnic minority patients. Thematic analysis was used to synthesize the relevant findings. We found 47 studies from 12 countries. Six potential barriers to health care for ethnic minorities were identified that may be related to health care professionals' attitudes or behaviors: Biases, stereotypes and prejudices; Language and communication barriers; Cultural misunderstandings; Gate-keeping; Statistical discrimination; Specific challenges of delivering care to undocumented migrants. Data on health care professionals' attitudes or behaviors are both limited and inconsistent. We thus provide reflections on methods, conceptualization, interpretation and the importance of the geographical or socio-political settings of potential studies. More empirical data is needed, especially on health care professionals' attitudes or behaviors towards (irregular) migrant patients. Copyright © 2017 Elsevier Ltd. All rights reserved.

Reflections on Mixing Methods in Applied Linguistics Research

ERIC Educational Resources Information Center

Hashemi, Mohammad R.

2012-01-01

This commentary advocates the use of mixed methods research--that is the integration of qualitative and quantitative methods in a single study--in applied linguistics. Based on preliminary findings from a research project in progress, some reflections on the current practice of mixing methods as a new trend in applied linguistics are put forward.…

Reclassification of Mixed Oligoastrocytic Tumors Using a Genetically Integrated Diagnostic Approach

PubMed Central

Kim, Seong-Ik; Lee, Yujin; Won, Jae-Kyung; Park, Chul-Kee; Choi, Seung Hong; Park, Sung-Hye

2018-01-01

Background Mixed gliomas, such as oligoastrocytomas (OA), anaplastic oligoastrocytomas, and glioblastomas (GBMs) with an oligodendroglial component (GBMO) are defined as tumors composed of a mixture of two distinct neoplastic cell types, astrocytic and oligodendroglial. Recently, mutations ATRX and TP53, and codeletion of 1p/19q are shown to be genetic hallmarks of astrocytic and oligodendroglial tumors, respectively. Subsequent molecular analyses of mixed gliomas preferred the reclassification to either oligodendroglioma or astrocytoma. This study was designed to apply genetically integrated diagnostic criteria to mixed gliomas and determine usefulness and prognostic value of new classification in Korean patients. Methods Fifty-eight cases of mixed OAs and GBMOs were retrieved from the pathology archives of Seoul National University Hospital from 2004 to 2015. Reclassification was performed according to genetic and immunohistochemical properties. Clinicopathological characteristics of each subgroup were evaluated. Overall survival was assessed and compared between subgroups. Results We could reclassify all mixed OAs and GBMOs into either astrocytic or oligodendroglial tumors. Notably, 29 GBMOs could be reclassified into 11 cases of GBM, IDH-mutant, 16 cases of GBM, IDH-wildtype, and two cases of anaplastic oligodendroglioma, IDH mutant. Overall survival was significantly different among these new groups (p<.001). Overall survival and progression-free survival were statistically better in gliomas with IDH mutation, ATRX mutation, no microscopic necrosis, and young patient age (cut off, 45 years old). Conclusions Our results strongly suggest that a genetically integrated diagnosis of glioma better reflects prognosis than former morphology-based methods. PMID:28958143

Mercury - A New Software Package for Orbital Integrations

NASA Astrophysics Data System (ADS)

Chambers, J. E.; Migliorini, F.

1997-07-01

We present Mercury: a new general-purpose software package for carrying out orbital integrations for problems in solar-system dynamics. Suitable applications include studying the long-term stability of the planetary system, investigating the orbital evolution of comets, asteroids or meteoroids, and simulating planetary accretion. Mercury is designed to be versatile and easy to use, accepting initial conditions in either Cartesian coordinates or Keplerian elements in ``cometary'' or ``asteroidal'' format, with different epochs of osculation for different objects. Output from an integration consists of either osculating or averaged (``proper'') elements, written in a machine-independent compressed format, which allows the results of a calculation performed on one platform to be transferred (e.g. via FTP) and decoded on another. Mercury itself is platform independent, and can be run on machines using DEC Unix, Open VMS, HP Unix, Solaris, Linux or DOS. During an integration, Mercury monitors and records details of close encounters, sungrazing events, ejections and collisions between objects. The effects of non-gravitational forces on comets can also be modelled. Additional effects such as Poynting-Robertson drag, post-Newtonian corrections, oblateness of the primary, and the galactic potential will be incorporated in future. The package currently supports integrations using a mixed-variable symplectic routine, the Bulirsch-Stoer method, and a hybrid code for planetary accretion calculations; with Everhart's popular RADAU algorithm and a symmetric multistep routine to be added shortly. Our presentation will include a demonstration of the latest version of Mercury, with the explicit aim of getting feedback from potential users and incorporating these suggestions into a final version that will be made available to everybody.

Some boundary-value problems for anisotropic quarter plane

NASA Astrophysics Data System (ADS)

Arkhypenko, K. M.; Kryvyi, O. F.

2018-04-01

To solve the mixed boundary-value problems of the anisotropic elasticity for the anisotropic quarter plane, a method based on the use of the space of generalized functions {\\Im }{\\prime }({\\text{R}}+2) with slow growth properties was developed. The two-dimensional integral Fourier transform was used to construct the system of fundamental solutions for the anisotropic quarter plane in this space and a system of eight boundary integral relations was obtained, which allows one to reduce the mixed boundary-value problems for the anisotropic quarter plane directly to systems of singular integral equations with fixed singularities. The exact solutions of these systems were found by using the integral Mellin transform. The asymptotic behavior of solutions was investigated at the vertex of the quarter plane.

Ultra-low power generation of twin photons in a compact silicon ring resonator.

PubMed

Azzini, Stefano; Grassani, Davide; Strain, Michael J; Sorel, Marc; Helt, L G; Sipe, J E; Liscidini, Marco; Galli, Matteo; Bajoni, Daniele

2012-10-08

We demonstrate efficient generation of correlated photon pairs by spontaneous four wave mixing in a 5 μm radius silicon ring resonator in the telecom band around 1550 nm. By optically pumping our device with a 200 μW continuous wave laser, we obtain a pair generation rate of 0.2 MHz and demonstrate photon time correlations with a coincidence-to-accidental ratio as high as 250. The results are in good agreement with theoretical predictions and show the potential of silicon micro-ring resonators as room temperature sources for integrated quantum optics applications.

Algorithms for computing the geopotential using a simple density layer

NASA Technical Reports Server (NTRS)

Morrison, F.

1976-01-01

Several algorithms have been developed for computing the potential and attraction of a simple density layer. These are numerical cubature, Taylor series, and a mixed analytic and numerical integration using a singularity-matching technique. A computer program has been written to combine these techniques for computing the disturbing acceleration on an artificial earth satellite. A total of 1640 equal-area, constant surface density blocks on an oblate spheroid are used. The singularity-matching algorithm is used in the subsatellite region, Taylor series in the surrounding zone, and numerical cubature on the rest of the earth.

Mode I and mixed I/III crack initiation and propagation behavior of V-4Cr-4Ti alloy at 25{degrees}C

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, H.X.; Kurtz, R.J.; Jones, R.H.

1997-04-01

The mode I and mixed-mode I/III fracture behavior of the production-scale heat (No. 832665) of V-4Cr-4Ti has been investigated at 25{degrees}C using compact tension (CT) specimens for a mode I crack and modified CT specimens for a mixed-mode I/III crack. The mode III to mode I load ratio was 0.47. Test specimens were vacuum annealed at 1000{degrees}C for 1 h after final machining. Both mode I and mixed-mode I/III specimens were fatigue cracked prior to J-integral testing. It was noticed that the mixed-mode I/III crack angle decreased from an initial 25 degrees to approximately 23 degrees due to crack planemore » rotation during fatigue cracking. No crack plane rotation occurred in the mode I specimen. The crack initiation and propagation behavior was evaluated by generating J-R curves. Due to the high ductility of this alloy and the limited specimen thickness (6.35 mm), plane strain requirements were not met so valid critical J-integral values were not obtained. However, it was found that the crack initiation and propagation behavior was significantly different between the mode I and the mixed-mode I/III specimens. In the mode I specimen crack initiation did not occur, only extensive crack tip blunting due to plastic deformation. During J-integral testing the mixed-mode crack rotated to an increased crack angle (in contrast to fatigue precracking) by crack blunting. When the crack initiated, the crack angle was about 30 degrees. After crack initiation the crack plane remained at 30 degrees until the test was completed. Mixed-mode crack initiation was difficult, but propagation was easy. The fracture surface of the mixed-mode specimen was characterized by microvoid coalescence.« less

Evaluating mixed samples as a source of error in non-invasive genetic studies using microsatellites

USGS Publications Warehouse

Roon, David A.; Thomas, M.E.; Kendall, K.C.; Waits, L.P.

2005-01-01

The use of noninvasive genetic sampling (NGS) for surveying wild populations is increasing rapidly. Currently, only a limited number of studies have evaluated potential biases associated with NGS. This paper evaluates the potential errors associated with analysing mixed samples drawn from multiple animals. Most NGS studies assume that mixed samples will be identified and removed during the genotyping process. We evaluated this assumption by creating 128 mixed samples of extracted DNA from brown bear (Ursus arctos) hair samples. These mixed samples were genotyped and screened for errors at six microsatellite loci according to protocols consistent with those used in other NGS studies. Five mixed samples produced acceptable genotypes after the first screening. However, all mixed samples produced multiple alleles at one or more loci, amplified as only one of the source samples, or yielded inconsistent electropherograms by the final stage of the error-checking process. These processes could potentially reduce the number of individuals observed in NGS studies, but errors should be conservative within demographic estimates. Researchers should be aware of the potential for mixed samples and carefully design gel analysis criteria and error checking protocols to detect mixed samples.

Research Aimed at Improving Both Mood and Weight (RAINBOW) in Primary Care: A Type 1 hybrid design randomized controlled trial

PubMed Central

Ma, Jun; Yank, Veronica; Lv, Nan; Goldhaber-Fiebert, Jeremy D.; Lewis, Megan A.; Kramer, M. Kaye; Snowden, Mark B.; Rosas, Lisa G.; Xiao, Lan; Blonstein, Andrea C.

2015-01-01

Effective interventions targeting comorbid obesity and depression are critical given the increasing prevalence and worsened outcomes for patients with both conditions. RAINBOW is a type 1 hybrid design randomized controlled trial. The objective is to evaluate the clinical and cost effectiveness and implementation potential of an integrated, technology-enhanced, collaborative care model for treating comorbid obesity and depression in primary care. Obese and depressed adults (n=404) will be randomized to usual care enhanced with the provision of a pedometer and information about the health system’s services for mood or weight management (control) or with the Integrated Coaching for Better Mood and Weight (I-CARE) program (intervention). The 12-month I-CARE program synergistically integrates two proven behavioral interventions: problem-solving therapy with as-needed intensification of pharmacotherapy for depression (PEARLS) and standardized behavioral treatment for obesity (Group Lifestyle Balance™). It utilizes traditional (e.g., office visits and phone consults) and emerging care delivery modalities (e.g., patient web portal and mobile applications). Follow-up assessments will occur at 6, 12, 18, and 24 months. We hypothesize that compared with controls, I-CARE participants will have greater improvements in weight and depression severity measured by the 20-item Depression Symptom Checklist at 12 months, which will be sustained at 24 months. We will also assess I-CARE’s cost-effectiveness and use mixed methods to examine its potential for reach, adoption, implementation, and maintenance. This study offers the potential to change how obese and depressed adults are treated—through a new model of accessible and integrative lifestyle medicine and mental health expertise—in primary care. PMID:26096714

Research aimed at improving both mood and weight (RAINBOW) in primary care: A type 1 hybrid design randomized controlled trial.

PubMed

Ma, Jun; Yank, Veronica; Lv, Nan; Goldhaber-Fiebert, Jeremy D; Lewis, Megan A; Kramer, M Kaye; Snowden, Mark B; Rosas, Lisa G; Xiao, Lan; Blonstein, Andrea C

2015-07-01

Effective interventions targeting comorbid obesity and depression are critical given the increasing prevalence and worsened outcomes for patients with both conditions. RAINBOW is a type 1 hybrid design randomized controlled trial. The objective is to evaluate the clinical and cost effectiveness and implementation potential of an integrated, technology-enhanced, collaborative care model for treating comorbid obesity and depression in primary care. Obese and depressed adults (n = 404) will be randomized to usual care enhanced with the provision of a pedometer and information about the health system's services for mood or weight management (control) or with the Integrated Coaching for Better Mood and Weight (I-CARE) program (intervention). The 12-month I-CARE program synergistically integrates two proven behavioral interventions: problem-solving therapy with as-needed intensification of pharmacotherapy for depression (PEARLS) and standardized behavioral treatment for obesity (Group Lifestyle Balance(™)). It utilizes traditional (e.g., office visits and phone consults) and emerging care delivery modalities (e.g., patient web portal and mobile applications). Follow-up assessments will occur at 6, 12, 18, and 24 months. We hypothesize that compared with controls, I-CARE participants will have greater improvements in weight and depression severity measured by the 20-item Depression Symptom Checklist at 12 months, which will be sustained at 24 months. We will also assess I-CARE's cost-effectiveness and use mixed methods to examine its potential for reach, adoption, implementation, and maintenance. This study offers the potential to change how obese and depressed adults are treated-through a new model of accessible and integrative lifestyle medicine and mental health expertise-in primary care. Copyright © 2015 Elsevier Inc. All rights reserved.

Early age rutting potential of warm mix asphalt (WMA).

DOT National Transportation Integrated Search

2012-12-01

Various plant produced Warm Mix Asphalt (WMA) mixtures were evaluated and compared to identical : plant produced Hot Mix Asphalt to assess their early life rutting potential. Along with laboratory permanent : deformation testing, fatigue and moisture...

Early age rutting potential of warm mix asphalt (WMA).

DOT National Transportation Integrated Search

2012-12-01

Various plant produced Warm Mix Asphalt (WMA) mixtures were evaluated and compared to identical plant produced Hot Mix Asphalt to assess their early life rutting potential. Along with laboratory permanent deformation testing, fatigue and moisture dam...

Multiple Flux Footprints, Flux Divergences and Boundary Layer Mixing Ratios: Studies of Ecosystem-Atmosphere CO2 Exchange Using the WLEF Tall Tower.

NASA Astrophysics Data System (ADS)

Davis, K. J.; Bakwin, P. S.; Yi, C.; Cook, B. D.; Wang, W.; Denning, A. S.; Teclaw, R.; Isebrands, J. G.

2001-05-01

Long-term, tower-based measurements using the eddy-covariance method have revealed a wealth of detail about the temporal dynamics of netecosystem-atmosphere exchange (NEE) of CO2. The data also provide a measure of the annual net CO2 exchange. The area represented by these flux measurements, however, is limited, and doubts remain about possible systematic errors that may bias the annual net exchange measurements. Flux and mixing ratio measurements conducted at the WLEF tall tower as part of the Chequamegon Ecosystem-Atmosphere Study (ChEAS) allow for unique assessment of the uncertainties in NEE of CO2. The synergy between flux and mixing ratio observations shows the potential for comparing inverse and eddy-covariance methods of estimating NEE of CO2. Such comparisons may strengthen confidence in both results and begin to bridge the huge gap in spatial scales (at least 3 orders of magnitude) between continental or hemispheric scale inverse studies and kilometer-scale eddy covariance flux measurements. Data from WLEF and Willow Creek, another ChEAS tower, are used to estimate random and systematic errors in NEE of CO2. Random uncertainty in seasonal exchange rates and the annual integrated NEE, including both turbulent sampling errors and variability in enviromental conditions, is small. Systematic errors are identified by examining changes in flux as a function of atmospheric stability and wind direction, and by comparing the multiple level flux measurements on the WLEF tower. Nighttime drainage is modest but evident. Systematic horizontal advection occurs during the morning turbulence transition. The potential total systematic error appears to be larger than random uncertainty, but still modest. The total systematic error, however, is difficult to assess. It appears that the WLEF region ecosystems were a small net sink of CO2 in 1997. It is clear that the summer uptake rate at WLEF is much smaller than that at most deciduous forest sites, including the nearby Willow Creek site. The WLEF tower also allows us to study the potential for monitoring continental CO2 mixing ratios from tower sites. Despite concerns about the proximity to ecosystem sources and sinks, it is clear that boundary layer CO2 mixing ratios can be monitored using typical surface layer towers. Seasonal and annual land-ocean mixing ratio gradients are readily detectable, providing the motivation for a flux-tower based mixing ratio observation network that could greatly improve the accuracy of inversion-based estimates of NEE of CO2, and enable inversions to be applied on smaller temporal and spatial scales. Results from the WLEF tower illustrate the degree to which local flux measurements represent interannual, seasonal and synoptic CO2 mixing ratio trends. This coherence between fluxes and mixing ratios serves to "regionalize" the eddy-covariance based local NEE observations.

Impact of integration of sexual and reproductive health services on consultation duration times: results from the Integra Initiative.

PubMed

Siapka, Mariana; Obure, Carol Dayo; Mayhew, Susannah H; Sweeney, Sedona; Fenty, Justin; Vassall, Anna

2017-11-01

The lack of human resources is a key challenge in scaling up of HIV services in Africa's health care system. Integrating HIV services could potentially increase their effectiveness and optimize the use of limited resources and clinical staff time. We examined the impact of integration of provider initiated HIV counselling and testing (PITC) and family planning (FP counselling and FP provision) services on duration of consultation to assess the impact of PITC and FP integration on staff workload. This study was conducted in 24 health facilities in Kenya under the Integra Initiative, a non-randomized, pre/post intervention trial to evaluate the impact of integrated HIV and sexual and reproductive health services on health and service outcomes. We compared the time spent providing PITC-only services, FP-only services and integrated PITC/FP services. We used log-linear regression to assess the impact of plausible determinants on the duration of clients' consultation times. Median consultation duration times were highest for PITC-only services (30 min), followed by integrated services (10 min) and FP-only services (8 min). Times for PITC-only and FP-only services were 69.7% higher (95% Confidence Intervals (CIs) 35.8-112.0) and 43.9% lower (95% CIs -55.4 to - 29.6) than times spent on these services when delivered as an integrated service, respectively. The reduction in consultation times with integration suggests a potential reduction in workload. The higher consultation time for PITC-only could be because more pre- and post-counselling is provided at these stand-alone services. In integrated PITC/FP services, the duration of the visit fell below that required by HIV testing guidelines, and service mix between counselling and testing substantially changed. Integration of HIV with FP services may compromise the quality of services delivered and care must be taken to clearly specify and monitor appropriate consultation duration times and procedures during the process of integrating HIV and FP services. © The Author 2017. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

Impact of integration of sexual and reproductive health services on consultation duration times: results from the Integra Initiative

PubMed Central

Siapka, Mariana; Obure, Carol Dayo; Mayhew, Susannah H; Fenty, Justin; Initiative, Integra; Vassall, Anna

2017-01-01

Abstract The lack of human resources is a key challenge in scaling up of HIV services in Africa’s health care system. Integrating HIV services could potentially increase their effectiveness and optimize the use of limited resources and clinical staff time. We examined the impact of integration of provider initiated HIV counselling and testing (PITC) and family planning (FP counselling and FP provision) services on duration of consultation to assess the impact of PITC and FP integration on staff workload. This study was conducted in 24 health facilities in Kenya under the Integra Initiative, a non-randomized, pre/post intervention trial to evaluate the impact of integrated HIV and sexual and reproductive health services on health and service outcomes. We compared the time spent providing PITC-only services, FP-only services and integrated PITC/FP services. We used log-linear regression to assess the impact of plausible determinants on the duration of clients’ consultation times. Median consultation duration times were highest for PITC-only services (30 min), followed by integrated services (10 min) and FP-only services (8 min). Times for PITC-only and FP-only services were 69.7% higher (95% Confidence Intervals (CIs) 35.8–112.0) and 43.9% lower (95% CIs −55.4 to − 29.6) than times spent on these services when delivered as an integrated service, respectively. The reduction in consultation times with integration suggests a potential reduction in workload. The higher consultation time for PITC-only could be because more pre- and post-counselling is provided at these stand-alone services. In integrated PITC/FP services, the duration of the visit fell below that required by HIV testing guidelines, and service mix between counselling and testing substantially changed. Integration of HIV with FP services may compromise the quality of services delivered and care must be taken to clearly specify and monitor appropriate consultation duration times and procedures during the process of integrating HIV and FP services. PMID:29194545

Integrating Renewable Generation into Grid Operations: Four International Experiences

DOE Office of Scientific and Technical Information (OSTI.GOV)

Weimar, Mark R.; Mylrea, Michael E.; Levin, Todd

International experiences with power sector restructuring and the resultant impacts on bulk power grid operations and planning may provide insight into policy questions for the evolving United States power grid as resource mixes are changing in response to fuel prices, an aging generation fleet and to meet climate goals. Australia, Germany, Japan and the UK were selected to represent a range in the level and attributes of electricity industry liberalization in order to draw comparisons across a variety of regions in the United States such as California, ERCOT, the Southwest Power Pool and the Southeast Reliability Region. The study drawsmore » conclusions through a literature review of the four case study countries with regards to the changing resource mix and the electricity industry sector structure and their impact on grid operations and planning. This paper derives lessons learned and synthesizes implications for the United States based on answers to the above questions and the challenges faced by the four selected countries. Each country was examined to determine the challenges to their bulk power sector based on their changing resource mix, market structure, policies driving the changing resource mix, and policies driving restructuring. Each countries’ approach to solving those changes was examined, as well as how each country’s market structure either exacerbated or mitigated the approaches to solving the challenges to their bulk power grid operations and planning. All countries’ policies encourage renewable energy generation. One significant finding included the low- to zero-marginal cost of intermittent renewables and its potential negative impact on long-term resource adequacy. No dominant solution has emerged although a capacity market was introduced in the UK and is being contemplated in Japan. Germany has proposed the Energy Market 2.0 to encourage flexible generation investment. The grid operator in Australia proposed several approaches to maintaining synchronous generation. Interconnections to other regions provides added opportunities for balancing that would not be available otherwise, and at this point, has allowed for integration of renewables.« less

Interaction between Fresh and Sea Water in Tidal Influenced Navigation Channel

NASA Astrophysics Data System (ADS)

Hwang, J. H. H.; Nam-Hoon, K.

2016-02-01

Nam-Hoon, Kim 1, Jin-Hwan, Hwang 2, Hyeyun-Ku 31,2,3 Department of Civil and Environmental Engineering, Seoul National University, Republic of Korea; 1nhkim0426@snu.ac.kr; 2jinhwang@snu.ac.kr; 3hyeyun.ku@gmail.com; We have conducted field observations after freshwater discharges of sea dike during ebb tide in Geum River Estuary, Korea to understand the interaction between fresh and sea water. To measure spatial variability of the stratified flow, an Acoustic Doppler Current Profiler (ADCP) and a portable free-fall tow-yo instrument, Yoing Ocean Data Acquisition Profiler (YODA profiler) which can continuously measures three-dimensional velocity profiles and vertical profiles of the fine-scale features, respectively, within water column were used in a vessel moving at a speed of 1-2 m/s. The flow observations show the strong stratification and dispersion occurred near field region because of the ebb tide advection (Fig. 1). As moving toward the far field region, the stratification and dispersion was getting thin and weak but still remaining. The presence of mixing process between fresh and sea water was represented by the gradient Richardson Number. The mixing occurred throughout the near field region and potentially mixed in the far field region. This study have been conducted to serve as a basic research of understanding the Region Of Freshwater Influence (ROFI) in the tidal influenced navigation channel. We are going to perform a few more observations in the future. Key words: Richardson number, stratification, mixing, ROFI, ADCP, CTDFigure 1. High-resolution observation data of salinity (psu) from YODA Profiler Acknowledgement: This research was supported by grants from the Korean Ministry of Oceans and Fisheries entitled as "Developing total management system for the Keum river estuary and coast" and "Integrated management of marine environment and ecosystems around Saemangeum". We also thank to the administrative supports of Integrated Research Institute of Construction and Environmental Engineering at Seoul National University.

Cognitive Radio Low-Energy Signal Analysis Sensor Integrated Circuits (CLASIC): A Broadband Mixed-Signal Iterative Down Conversion Spectrum Analyzer for Signal Recognition Applications

DTIC Science & Technology

2015-12-01

AFRL-RY-WP-TR-2015-0144 COGNITIVE RADIO LOW-ENERGY SIGNAL ANALYSIS SENSOR INTEGRATED CIRCUITS (CLASIC) A Broadband Mixed-Signal Iterative Down...See additional restrictions described on inside pages STINFO COPY AIR FORCE RESEARCH LABORATORY SENSORS DIRECTORATE WRIGHT-PATTERSON AIR FORCE...Signature// TODD KASTLE, Chief Spectrum Warfare Division Sensors Directorate This report is published in the interest of scientific and technical

Nonlinear Optics with 2D Layered Materials.

PubMed

Autere, Anton; Jussila, Henri; Dai, Yunyun; Wang, Yadong; Lipsanen, Harri; Sun, Zhipei

2018-06-01

2D layered materials (2DLMs) are a subject of intense research for a wide variety of applications (e.g., electronics, photonics, and optoelectronics) due to their unique physical properties. Most recently, increasing research efforts on 2DLMs are projected toward the nonlinear optical properties of 2DLMs, which are not only fascinating from the fundamental science point of view but also intriguing for various potential applications. Here, the current state of the art in the field of nonlinear optics based on 2DLMs and their hybrid structures (e.g., mixed-dimensional heterostructures, plasmonic structures, and silicon/fiber integrated structures) is reviewed. Several potential perspectives and possible future research directions of these promising nanomaterials for nonlinear optics are also presented. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Realizing the Potential of Patient Engagement: Designing IT to Support Health in Everyday Life

PubMed Central

Novak, Laurie L.; Unertl, Kim M.; Holden, Richard J.

2017-01-01

Maintaining health or managing a chronic condition involves performing and coordinating potentially new and complex tasks in the context of everyday life. Tools such as reminder apps and online health communities are being created to support patients in carrying out these tasks. Research has documented mixed effectiveness and problems with continued use of these tools, and suggests that more widespread adoption may be aided by design approaches that facilitate integration of eHealth technologies into patients’ and family members’ daily routines. Given the need to augment existing methods of design and implementation of eHealth tools, this contribution discusses frameworks and associated methods that engage patients and explore contexts of use in ways that can produce insights for eHealth designers. PMID:27198106

Color mixing from monolithically integrated InGaN-based light-emitting diodes by local strain engineering

NASA Astrophysics Data System (ADS)

Chung, Kunook; Sui, Jingyang; Demory, Brandon; Ku, Pei-Cheng

2017-07-01

Additive color mixing across the visible spectrum was demonstrated from an InGaN based light-emitting diode (LED) pixel comprising red, green, and blue subpixels monolithically integrated and enabled by local strain engineering. The device was fabricated using a top-down approach on a metal-organic chemical vapor deposition-grown sample consisting of a typical LED epitaxial stack. The three color subpixels were defined in a single lithographic step. The device was characterized for its electrical properties and emission spectra under an uncooled condition, which is desirable in practical applications. The color mixing was controlled by pulse-width modulation, and the degree of color control was also characterized.

Synthesis gas production by mixed conducting membranes with integrated conversion into liquid products

DOEpatents

Nataraj, Shankar; Russek, Steven Lee; Dyer, Paul Nigel

2000-01-01

Natural gas or other methane-containing feed gas is converted to a C.sub.5 -C.sub.19 hydrocarbon liquid in an integrated system comprising an oxygenative synthesis gas generator, a non-oxygenative synthesis gas generator, and a hydrocarbon synthesis process such as the Fischer-Tropsch process. The oxygenative synthesis gas generator is a mixed conducting membrane reactor system and the non-oxygenative synthesis gas generator is preferably a heat exchange reformer wherein heat is provided by hot synthesis gas product from the mixed conducting membrane reactor system. Offgas and water from the Fischer-Tropsch process can be recycled to the synthesis gas generation system individually or in combination.

Breaking from binaries - using a sequential mixed methods design.

PubMed

Larkin, Patricia Mary; Begley, Cecily Marion; Devane, Declan

2014-03-01

To outline the traditional worldviews of healthcare research and discuss the benefits and challenges of using mixed methods approaches in contributing to the development of nursing and midwifery knowledge. There has been much debate about the contribution of mixed methods research to nursing and midwifery knowledge in recent years. A sequential exploratory design is used as an exemplar of a mixed methods approach. The study discussed used a combination of focus-group interviews and a quantitative instrument to obtain a fuller understanding of women's experiences of childbirth. In the mixed methods study example, qualitative data were analysed using thematic analysis and quantitative data using regression analysis. Polarised debates about the veracity, philosophical integrity and motivation for conducting mixed methods research have largely abated. A mixed methods approach can contribute to a deeper, more contextual understanding of a variety of subjects and experiences; as a result, it furthers knowledge that can be used in clinical practice. The purpose of the research study should be the main instigator when choosing from an array of mixed methods research designs. Mixed methods research offers a variety of models that can augment investigative capabilities and provide richer data than can a discrete method alone. This paper offers an example of an exploratory, sequential approach to investigating women's childbirth experiences. A clear framework for the conduct and integration of the different phases of the mixed methods research process is provided. This approach can be used by practitioners and policy makers to improve practice.

Awareness and Perceptions of Emergency Contraceptive Pills Among Women in Kinshasa, Democratic Republic of the Congo.

PubMed

Hernandez, Julie H; Muanda, Mbadu; Garcia, Mélissa; Matawa, Grace

2017-09-01

Despite the commitment of the Democratic Republic of the Congo (DRC) to expand the family planning method mix and increase access to services, awareness of emergency contraception is low among women, and the method remains underused and poorly integrated in family planning programming. Data from 15 focus group discussions conducted in 2016 among women aged 15-35 were used to examine awareness and perceptions of, and attitudes toward, emergency contraceptives. After facilitators explained emergency contraceptive pills' mechanism of action and other characteristics, participants were asked about the potential benefits and risks of making the method more widely available. Transcripts were analyzed using an iterative approach. Women reported employing a wide range of postcoital contraceptive behaviors, albeit often using inappropriate products, and generally agreed that emergency contraceptive pills seemed to be a potentially effective solution to their family planning needs. Perceived benefits and limitations of the method were almost always framed in reference to other, better-known contraceptives, and women expressed strong preferences for pharmacy-based provision that aligned with their usual behaviors for obtaining contraceptives. Participants were reluctant to see the method available for free. Emergency contraceptive pills have the potential to address gaps in the family planning method mix in the DRC. Assessing whether women have incomplete or erroneous information about family planning methods can provide better understanding of women's contraceptive choices in low-income countries.

A Digital Mixed Methods Research Design: Integrating Multimodal Analysis with Data Mining and Information Visualization for Big Data Analytics

ERIC Educational Resources Information Center

O'Halloran, Kay L.; Tan, Sabine; Pham, Duc-Son; Bateman, John; Vande Moere, Andrew

2018-01-01

This article demonstrates how a digital environment offers new opportunities for transforming qualitative data into quantitative data in order to use data mining and information visualization for mixed methods research. The digital approach to mixed methods research is illustrated by a framework which combines qualitative methods of multimodal…

Exploring Race, Culture, and Family in the Identities of Mixed Heritage Students

ERIC Educational Resources Information Center

Johnston-Guerrero, Marc P.; Pecero, Veronica

2016-01-01

Family plays an integral role in racial and cultural socialization, yet how mixed heritage students understand the concepts of race and culture in relation to family is unclear. This qualitative study explored the interplay of race, culture, and family in the identity constructions of 25 mixed heritage students. Findings suggest the centrality of…

Industry-Oriented Laboratory Development for Mixed-Signal IC Test Education

ERIC Educational Resources Information Center

Hu, J.; Haffner, M.; Yoder, S.; Scott, M.; Reehal, G.; Ismail, M.

2010-01-01

The semiconductor industry is lacking qualified integrated circuit (IC) test engineers to serve in the field of mixed-signal electronics. The absence of mixed-signal IC test education at the collegiate level is cited as one of the main sources for this problem. In response to this situation, the Department of Electrical and Computer Engineering at…

Components of Effective Cognitive-Behavioral Therapy for Pediatric Headache: A Mixed Methods Approach

PubMed Central

Law, Emily F.; Beals-Erickson, Sarah E.; Fisher, Emma; Lang, Emily A.; Palermo, Tonya M.

2017-01-01

Internet-delivered treatment has the potential to expand access to evidence-based cognitive-behavioral therapy (CBT) for pediatric headache, and has demonstrated efficacy in small trials for some youth with headache. We used a mixed methods approach to identify effective components of CBT for this population. In Study 1, component profile analysis identified common interventions delivered in published RCTs of effective CBT protocols for pediatric headache delivered face-to-face or via the Internet. We identified a core set of three treatment components that were common across face-to-face and Internet protocols: 1) headache education, 2) relaxation training, and 3) cognitive interventions. Biofeedback was identified as an additional core treatment component delivered in face-to-face protocols only. In Study 2, we conducted qualitative interviews to describe the perspectives of youth with headache and their parents on successful components of an Internet CBT intervention. Eleven themes emerged from the qualitative data analysis, which broadly focused on patient experiences using the treatment components and suggestions for new treatment components. In the Discussion, these mixed methods findings are integrated to inform the adaptation of an Internet CBT protocol for youth with headache. PMID:29503787

Components of Effective Cognitive-Behavioral Therapy for Pediatric Headache: A Mixed Methods Approach.

PubMed

Law, Emily F; Beals-Erickson, Sarah E; Fisher, Emma; Lang, Emily A; Palermo, Tonya M

2017-01-01

Internet-delivered treatment has the potential to expand access to evidence-based cognitive-behavioral therapy (CBT) for pediatric headache, and has demonstrated efficacy in small trials for some youth with headache. We used a mixed methods approach to identify effective components of CBT for this population. In Study 1, component profile analysis identified common interventions delivered in published RCTs of effective CBT protocols for pediatric headache delivered face-to-face or via the Internet. We identified a core set of three treatment components that were common across face-to-face and Internet protocols: 1) headache education, 2) relaxation training, and 3) cognitive interventions. Biofeedback was identified as an additional core treatment component delivered in face-to-face protocols only. In Study 2, we conducted qualitative interviews to describe the perspectives of youth with headache and their parents on successful components of an Internet CBT intervention. Eleven themes emerged from the qualitative data analysis, which broadly focused on patient experiences using the treatment components and suggestions for new treatment components. In the Discussion, these mixed methods findings are integrated to inform the adaptation of an Internet CBT protocol for youth with headache.

Paradigms, pragmatism and possibilities: mixed-methods research in speech and language therapy.

PubMed

Glogowska, Margaret

2011-01-01

After the decades of the so-called 'paradigm wars' in social science research methodology and the controversy about the relative place and value of quantitative and qualitative research methodologies, 'paradigm peace' appears to have now been declared. This has come about as many researchers have begun to take a 'pragmatic' approach in the selection of research methodology, choosing the methodology best suited to answering the research question rather than conforming to a methodological orthodoxy. With the differences in the philosophical underpinnings of the two traditions set to one side, an increasing awareness, and valuing, of the 'mixed-methods' approach to research is now present in the fields of social, educational and health research. To explore what is meant by mixed-methods research and the ways in which quantitative and qualitative methodologies and methods can be combined and integrated, particularly in the broad field of health services research and the narrower one of speech and language therapy. The paper discusses the ways in which methodological approaches have already been combined and integrated in health services research and speech and language therapy, highlighting the suitability of mixed-methods research for answering the typically multifaceted questions arising from the provision of complex interventions. The challenges of combining and integrating quantitative and qualitative methods and the barriers to the adoption of mixed-methods approaches are also considered. The questions about healthcare, as it is being provided in the 21st century, calls for a range of methodological approaches. This is particularly the case for human communication and its disorders, where mixed-methods research offers a wealth of possibilities. In turn, speech and language therapy research should be able to contribute substantively to the future development of mixed-methods research. © 2010 Royal College of Speech & Language Therapists.

The potential of task shifting selected maternal interventions to auxiliary midwives in Myanmar: a mixed-method study.

PubMed

Than, Kyu Kyu; Tin, Khaing Nwe; La, Thazin; Thant, Kyaw Soe; Myint, Theingi; Beeson, James G; Luchters, Stanley; Morgan, Alison

2018-01-03

An estimated 282 women die for every 100,000 live births in Myanmar, most due to preventable causes. Auxiliary Midwives (AMWs) in Myanmar are responsible for providing a package of care during pregnancy and childbirth to women in rural hard to reach areas where skilled birth attendants (Midwives) are not accessible. This study aims to examine the role of AMWs in Myanmar and to assess the current practices of three proposed essential maternal interventions (oral supplement distribution to pregnant women; administration of misoprostol to prevent postpartum haemorrhage; management of puerperal sepsis with oral antibiotics) in order to facilitate a formal integration of these tasks to AMWs in Myanmar. A mixed methods study was conducted in Magwe Region, Myanmar involving a survey of 262 AMWs, complemented by 15 focus group discussions with midwives (MWs), AMWs, mothers and community members, and 10 key informant interviews with health care providers at different levels within the health care system. According to current government policy, AMWs are responsible for identifying pregnant women, screening for danger signs and facilitating early referral, provision of counselling on nutrition and birth preparedness for women in hard-to-reach areas. AMWs also assist at normal deliveries and help MWs provide immunization services. In practice, they also provide oral supplements to pregnant women (84%), provide antibiotics to mothers during the puerperium (43%), and provide misoprostol to prevent postpartum haemorrhage (41%). The current practices of AMWs demonstrate the potential for task shifting on selected essential maternal interventions. However, to integrate these interventions into formal practice they must be complemented with appropriate training, clear guidelines on drug use, systematic recording and reporting, supportive monitoring and supervision and a clear political commitment towards task shifting. With the current national government's commitment towards one AMW in one village, this study highlights the potential for shifting specific maternal lifesaving tasks to AMWs.

Point-of-care detection and real-time monitoring of intravenously delivered drugs via tubing with an integrated SERS sensor.

PubMed

Wu, Hsin-Yu; Cunningham, Brian T

2014-05-21

We demonstrate an approach for detection, identification, and kinetic monitoring of drugs flowing within tubing, through the use of a plasmonic nanodome array (PNA) surface. The PNA structures are fabricated using a low-cost nanoreplica molding process upon a flexible plastic substrate that is subsequently integrated with a flow cell that connects in series with ordinary intravenous (IV) drug delivery tubing. To investigate the potential clinical applications for point-of-care detection and real-time monitoring, we perform SERS detection of ten pharmaceutical compounds (hydrocodone, levorphanol, morphine, oxycodone, methadone, phenobarbital, dopamine, diltiazem, promethazine, and mitoxantrone). We demonstrate dose-dependent SERS signal magnitude, resulting in detection limits (ng ml(-1)) well below typical administered dosages (mg ml(-1)). Further, we show that the detected drugs are not permanently attached to the PNA surface, and thus our approach is capable of performing continuous monitoring of drug delivery as materials flow through IV tubing that is connected in series with the sensor. Finally, we demonstrate the potential co-detection of multiple drugs when they are mixed together, and show excellent reproducibility and stability of SERS measurements for periods extending at least five days. The capabilities reported here demonstrate the potential to use PNA SERS surfaces for enhancing the safety of IV drug delivery.

Evaluation of peristaltic micromixers for highly integrated microfluidic systems

PubMed Central

Kim, Duckjong; Rho, Hoon Suk; Jambovane, Sachin; Shin, Soojeong; Hong, Jong Wook

2016-01-01

Microfluidic devices based on the multilayer soft lithography allow accurate manipulation of liquids, handling reagents at the sub-nanoliter level, and performing multiple reactions in parallel processors by adapting micromixers. Here, we have experimentally evaluated and compared several designs of micromixers and operating conditions to find design guidelines for the micromixers. We tested circular, triangular, and rectangular mixing loops and measured mixing performance according to the position and the width of the valves that drive nanoliters of fluids in the micrometer scale mixing loop. We found that the rectangular mixer is best for the applications of highly integrated microfluidic platforms in terms of the mixing performance and the space utilization. This study provides an improved understanding of the flow behaviors inside micromixers and design guidelines for micromixers that are critical to build higher order fluidic systems for the complicated parallel bio/chemical processes on a chip. PMID:27036809

Integrated microfluidic systems for cell lysis, mixing/pumping and DNA amplification

NASA Astrophysics Data System (ADS)

Lee, Chia-Yen; Lee, Gwo-Bin; Lin, Jr-Lung; Huang, Fu-Chun; Liao, Chia-Sheng

2005-06-01

The present paper reports a fully automated microfluidic system for the DNA amplification process by integrating an electroosmotic pump, an active micromixer and an on-chip temperature control system. In this DNA amplification process, the cell lysis is initially performed in a micro cell lysis reactor. Extracted DNA samples, primers and reagents are then driven electroosmotically into a mixing region where they are mixed by the active micromixer. The homogeneous mixture is then thermally cycled in a micro-PCR (polymerase chain reaction) chamber to perform DNA amplification. Experimental results show that the proposed device can successfully automate the sample pretreatment operation for DNA amplification, thereby delivering significant time and effort savings. The new microfluidic system, which facilitates cell lysis, sample driving/mixing and DNA amplification, could provide a significant contribution to ongoing efforts to miniaturize bio-analysis systems by utilizing a simple fabrication process and cheap materials.

Evaluation of peristaltic micromixers for highly integrated microfluidic systems

NASA Astrophysics Data System (ADS)

Kim, Duckjong; Rho, Hoon Suk; Jambovane, Sachin; Shin, Soojeong; Hong, Jong Wook

2016-03-01

Microfluidic devices based on the multilayer soft lithography allow accurate manipulation of liquids, handling reagents at the sub-nanoliter level, and performing multiple reactions in parallel processors by adapting micromixers. Here, we have experimentally evaluated and compared several designs of micromixers and operating conditions to find design guidelines for the micromixers. We tested circular, triangular, and rectangular mixing loops and measured mixing performance according to the position and the width of the valves that drive nanoliters of fluids in the micrometer scale mixing loop. We found that the rectangular mixer is best for the applications of highly integrated microfluidic platforms in terms of the mixing performance and the space utilization. This study provides an improved understanding of the flow behaviors inside micromixers and design guidelines for micromixers that are critical to build higher order fluidic systems for the complicated parallel bio/chemical processes on a chip.

Integration of Component Knowledge in Penalized-Likelihood Reconstruction with Morphological and Spectral Uncertainties.

PubMed

Stayman, J Webster; Tilley, Steven; Siewerdsen, Jeffrey H

2014-01-01

Previous investigations [1-3] have demonstrated that integrating specific knowledge of the structure and composition of components like surgical implants, devices, and tools into a model-based reconstruction framework can improve image quality and allow for potential exposure reductions in CT. Using device knowledge in practice is complicated by uncertainties in the exact shape of components and their particular material composition. Such unknowns in the morphology and attenuation properties lead to errors in the forward model that limit the utility of component integration. In this work, a methodology is presented to accommodate both uncertainties in shape as well as unknown energy-dependent attenuation properties of the surgical devices. This work leverages the so-called known-component reconstruction (KCR) framework [1] with a generalized deformable registration operator and modifications to accommodate a spectral transfer function in the component model. Moreover, since this framework decomposes the object into separate background anatomy and "known" component factors, a mixed fidelity forward model can be adopted so that measurements associated with projections through the surgical devices can be modeled with much greater accuracy. A deformable KCR (dKCR) approach using the mixed fidelity model is introduced and applied to a flexible wire component with unknown structure and composition. Image quality advantages of dKCR over traditional reconstruction methods are illustrated in cone-beam CT (CBCT) data acquired on a testbench emulating a 3D-guided needle biopsy procedure - i.e., a deformable component (needle) with strong energy-dependent attenuation characteristics (steel) within a complex soft-tissue background.

The complex nature of mixed farming systems requires multidimensional actions supported by integrative research and development efforts.

PubMed

González-García, E; Gourdine, J L; Alexandre, G; Archimède, H; Vaarst, M

2012-05-01

Mixed farming systems (MFS) have demonstrated some success by focusing on the use of integrative and holistic mechanisms, and rationally building on and using the natural and local resource base without exhausting it, while enhancing biodiversity, optimizing complementarities between crops and animal systems and finally increasing opportunities in rural livelihoods. Focusing our analysis and discussion on field experiences and empirical knowledge in the Caribbean islands, this paper discusses the opportunities for a change needed in current MFS research-development philosophy. The importance of shifting from fragile/specialized production systems to MFS under current global conditions is argued with an emphasis on the case of Small Islands Developing States (SIDS) and the Caribbean. Particular vulnerable characteristics as well as the potential and constraints of SIDS and their agricultural sectors are described, while revealing the opportunities for the 'richness' of the natural and local resources to support authentic and less dependent production system strategies. Examples are provided of the use of natural grasses, legumes, crop residues and agro-industrial by-products. We analyse the requirement for a change in research strategies and initiatives through the development of a complex but necessary multi-/inter-/trans-disciplinary teamwork spirit. We stress as essential the collaboration and active participation of local and regional actors, stakeholders and end-users in the identification of research priorities, as well as the generation, exchange and dissemination of knowledge and technology innovations, while strengthening the leadership roles in the conduct of integrative and participative research and development projects.

Quantifying phytoplankton productivity and photoinhibition in the Ross Sea Polynya with large eddy simulation of Langmuir circulation

NASA Astrophysics Data System (ADS)

Smyth, Robyn L.; Akan, Cigdem; Tejada-Martínez, Andrés.; Neale, Patrick J.

2017-07-01

Southern Ocean phytoplankton assemblages acclimated to low-light environments that result from deep mixing are often sensitive to ultraviolet and high photosynthetically available radiation. In such assemblages, exposures to inhibitory irradiance near the surface result in loss of photosynthetic capacity that is not rapidly recovered and can depress photosynthesis after transport below depths penetrated by inhibitory irradiance. We used a coupled biophysical modeling approach to quantify the reduction in primary productivity due to photoinhibition based upon experiments and observations made during the spring bloom in Ross Sea Polynya (RSP). Large eddy simulation (LES) was used to generate depth trajectories representative of observed Langmuir circulation that were passed through an underwater light field to yield time series of spectral irradiance representative of what phytoplankton would have experienced in situ. These were used to drive an assemblage-specific photosynthesis-irradiance model with inhibition determined from a biological weighting function and repair rate estimated from shipboard experiments on the local assemblage. We estimate the daily depth-integrated productivity was 230 mmol C m-2. This estimate includes a 6-7% reduction in daily depth-integrated productivity over potential productivity (i.e., effects of photoinhibition excluded). When trajectory depths were fixed (no vertical transport), the reduction in productivity was nearly double. Relative to LES estimates, there was slightly less depth-integrated photoinhibition with random walk trajectories and nearly twice as much with circular rotations. This suggests it is important to account for turbulence when simulating the effects of vertical mixing on photoinhibition due to the kinetics of photodamage and repair.

Potential misdiagnosis of von Willebrand disease and haemophilia caused by ineffective mixing of thawed plasma.

PubMed

Favaloro, E J; Oliver, S; Mohammed, S; Ahuja, M; Grzechnik, E; Azimulla, S; McDonald, J; Lima-Oliveira, G; Lippi, G

2017-09-01

von Willebrand disease (VWD) reflects a loss or dysfunction in von Willebrand factor (VWF), while haemophilia represents a loss or dysfunction of clotting factors such as factor VIII (FVIII) or FIX. Their diagnosis requires laboratory testing, with this potentially compromised by preanalytical events, including poor sample quality. This study assessed the effect of inadequate mixing as a potential cause of VWD and haemophilia misdiagnosis. After completion of requested testing, 48 consecutive patient samples comprising separate aliquots from single collections were individually pooled, appropriately mixed, then frozen in separate aliquots, either at -20°C or -80°C for 2-7 days. Each sample set was then thawed and the separate aliquots subjected to separate mixing protocols (several inversions, blood roller, vortex) vs a non-mix sample, and all aliquots then tested for various VWF and factor assays. Non-mixing led to substantial reduction in VWF and factors in about 25% of samples, that in some cases could lead to misdiagnosis of VWD or haemophilia. Interestingly, there were also some differences observed with respect to different mixing protocols. Our study identified ineffective or variable mixing of thawed plasma samples as potential causes of misdiagnosis of VWD or haemophilia. Further education regarding the importance of appropriate mixing appears warranted. © 2017 John Wiley & Sons Ltd.

Understanding case mix across three paediatric services: could integration of primary and secondary general paediatrics alter walk-in emergency attendances?

PubMed

Steele, Lloyd; Coote, Nicky; Klaber, Robert; Watson, Mando; Coren, Michael

2018-05-04

To understand the case mix of three different paediatric services, reasons for using an acute paediatric service in a region of developing integrated care and where acute attendances could alternatively have been managed. Mixed methods service evaluation, including retrospective review of referrals to general paediatric outpatients (n=534) and a virtual integrated service (email advice line) (n=474), as well as a prospective survey of paediatric ambulatory unit (PAU) attendees (n=95) and review by a paediatric consultant/registrar to decide where these cases could alternatively have been managed. The case mix of outpatient referrals and the email advice line was similar, but the case mix for PAU was more acute.The most common parental reasons for attending PAU were referral by a community health professional (27.2%), not being able to get a general practitioner (GP) appointment when desired (21.7%), wanting to avoid accident and emergency (17.4%) and wanting specialist paediatric input (14.1%). More than half of PAU presentations were deemed most appropriate for community management by a GP or midwife. The proportion of cases suitable for community management varied by the reason for attendance, with it highestl for parents reporting not being able to get a GP appointment (85%), and lowest for those referred by community health professionals (29%). One in two attendances to acute paediatric services could have been managed in the community. Integration of paediatric services could help address parental reasons for attending acute services, as well as facilitating the community management of chronic conditions. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Mixed methods for telehealth research.

PubMed

Caffery, Liam J; Martin-Khan, Melinda; Wade, Victoria

2017-10-01

Mixed methods research is important to health services research because the integrated qualitative and quantitative investigation can give a more comprehensive understanding of complex interventions such as telehealth than can a single-method study. Further, mixed methods research is applicable to translational research and program evaluation. Study designs relevant to telehealth research are described and supported by examples. Quality assessment tools, frameworks to assist in the reporting and review of mixed methods research, and related methodologies are also discussed.

Invisible nursing research: thoughts about mixed methods research and nursing practice.

PubMed

Fawcett, Jacqueline

2015-04-01

In this this essay, the author addresses the close connection between mixed methods research and nursing practice. If the assertion that research and practice are parallel processes is accepted, then nursing practice may be considered "invisible mixed methods research," in that almost every encounter between a nurse and a patient involves collection and integration of qualitative (word) and quantitative (number) information that actually is single-case mixed methods research. © The Author(s) 2015.

An ideal-typical model for comparing interprofessional relations and skill mix in health care.

PubMed

Schönfelder, Walter; Nilsen, Elin Anita

2016-11-08

Comparisons of health system performance, including the regulations of interprofessional relations and the skill mix between health professions are challenging. National strategies for regulating interprofessional relations vary widely across European health care systems. Unambiguously defined and generally accepted performance indicators have to remain generic, with limited power for recognizing the organizational structures regulating interprofessional relations in different health systems. A coherent framework for in-depth comparisons of different models for organizing interprofessional relations and the skill mix between professional groups is currently not available. This study aims to develop an ideal-typical framework for categorizing skill mix and interprofessional relations in health care, and to assess the potential impact for different ideal types on care coordination and integrated service delivery. A document analysis of the Health Systems in Transition (HiT) reports published by the European Observatory on Health Systems and Policies was conducted. The HiT reports to 31 European health systems were analyzed using a qualitative content analysis and a process of meaning condensation. The educational tracks available to nurses have an impact on the professional autonomy for nurses, the hierarchy between professional groups, the emphasis given to negotiating skill mix, interdisciplinary teamwork and the extent of cooperation across the health and social service interface. Based on the results of the document analysis, three ideal types for regulating interprofessional relations and skill mix in health care are delimited. For each ideal type, outcomes on service coordination and holistic service delivery are described. Comparisons of interprofessional relations are necessary for proactive health human resource policies. The proposed ideal-typical framework provides the means for in-depth comparisons of interprofessional relations in the health care workforce beyond of what is possible with directly comparable, but generic performance indicators.

Integrated biostratigraphic and sequence stratigraphic framework for Upper Cretaceous strata of the eastern Gulf Coastal Plain, USA

USGS Publications Warehouse

Mancini, E.A.; Puckett, T.M.; Tew, B.H.

1996-01-01

Upper Cretaceous (Santonian-Maastrichtian stages) strata of the eastern US Gulf Coastal Plain represent a relatively complete section of marine to nonmarine mixed siliciclastic and carbonate sediments. This section includes three depositional sequences which display characteristic systems tracts and distinct physical defining surfaces. The marine lithofacies are rich in calcareous nannoplankton and planktonic foraminifera which can be used for biostratigraphic zonation. Integration of this zonation with the lithostratigraphy and sequence stratigraphy of these strata results in a framework that can be used for local and regional intrabasin correlation and potentially for global interbasin correlation. Only the synchronous maximum flooding surfaces of these depositional sequences, however, have chronostratigraphic significance. The sequence boundaries and initial flooding surfaces are diachronous, and their use for correlation can produce conflicting results. The availability of high resolution biostratigraphy is critical for global correlation of depositional sequences. ?? 1996 Academic Press Limited.

Designing a mathematical model for integrating dynamic cellular manufacturing into supply chain system

NASA Astrophysics Data System (ADS)

Aalaei, Amin; Davoudpour, Hamid

2012-11-01

This article presents designing a new mathematical model for integrating dynamic cellular manufacturing into supply chain system with an extensive coverage of important manufacturing features consideration of multiple plants location, multi-markets allocation, multi-period planning horizons with demand and part mix variation, machine capacity, and the main constraints are demand of markets satisfaction in each period, machine availability, machine time-capacity, worker assignment, available time of worker, production volume for each plant and the amounts allocated to each market. The aim of the proposed model is to minimize holding and outsourcing costs, inter-cell material handling cost, external transportation cost, procurement & maintenance and overhead cost of machines, setup cost, reconfiguration cost of machines installation and removal, hiring, firing and salary worker costs. Aimed to prove the potential benefits of such a design, presented an example is shown using a proposed model.

The Variability of Nursing Attitudes Toward Mental Illness: An Integrative Review

PubMed Central

de Jacq, Krystyna; Norful, Allison Andreno; Larson, Elaine

2016-01-01

Mental illnesses are common worldwide, and nurses’ attitudes toward mental illness have an impact on the care they deliver. This integrative literature review focused on nurses’ attitudes toward mental illness. Four databases were searched between January 1, 1995 to October 31, 2015 selecting studies, which met the following inclusion criteria: 1) English language; and 2) Research in which the measured outcome was nurses’ attitudes toward mental illness. Fifteen studies conducted across 20 countries that 4,282 participants met the inclusion criteria. No study was conducted in the United States (U.S.). Studies reported that nurses had mixed attitudes toward mental illness, which were comparable to those of the general public. More negative attitudes were directed toward persons with schizophrenia. Results indicate the need for further research to determine whether attitudes among nurses in the U.S. differ from those reported from other countries and to examine potential gaps in nursing curriculum regarding mental illness. PMID:27888976

‘Someday it will be the norm’: physician perspectives on the utility of genome sequencing for patient care in the MedSeq Project

PubMed Central

Vassy, Jason L; Christensen, Kurt D; Slashinski, Melody J; Lautenbach, Denise M; Raghavan, Sridharan; Robinson, Jill Oliver; Blumenthal-Barby, Jennifer; Feuerman, Lindsay Zausmer; Lehmann, Lisa Soleymani; Murray, Michael F; Green, Robert C; McGuire, Amy L

2015-01-01

Aim To describe practicing physicians’ perceived clinical utility of genome sequencing. Materials & methods We conducted a mixed-methods analysis of data from 18 primary care physicians and cardiologists in a study of the clinical integration of whole-genome sequencing. Physicians underwent brief genomics continuing medical education before completing surveys and semi-structured interviews. Results Physicians described sequencing as currently lacking clinical utility because of its uncertain interpretation and limited impact on clinical decision-making, but they expressed the idea that its clinical integration was inevitable. Potential clinical uses for sequencing included complementing other clinical information, risk stratification, motivating patient behavior change and pharmacogenetics. Conclusion Physicians given genomics continuing medical education use the language of both evidence-based and personalized medicine in describing the utility of genome-wide testing in patient care. PMID:25642274

Generating The Force: The Roundout Brigade

DTIC Science & Technology

1992-05-20

The Total Force Policy means the integration of planning, programming and budgeting for the manning, equipping, maintaining and training of a mix of...methodology for making force mix decisions: cost, force capability, training requirements, and personnel availability. The GAO did not 3 include political...considerations as part of its criteria for force mix determination. However, any examination of Active and Reserve Component force structure must

Integrating addiction treatment into primary care using mobile health technology: protocol for an implementation research study

PubMed Central

2014-01-01

Background Healthcare reform in the United States is encouraging Federally Qualified Health Centers and other primary-care practices to integrate treatment for addiction and other behavioral health conditions into their practices. The potential of mobile health technologies to manage addiction and comorbidities such as HIV in these settings is substantial but largely untested. This paper describes a protocol to evaluate the implementation of an E-Health integrated communication technology delivered via mobile phones, called Seva, into primary-care settings. Seva is an evidence-based system of addiction treatment and recovery support for patients and real-time caseload monitoring for clinicians. Methods/Design Our implementation strategy uses three models of organizational change: the Program Planning Model to promote acceptance and sustainability, the NIATx quality improvement model to create a welcoming environment for change, and Rogers’s diffusion of innovations research, which facilitates adaptations of innovations to maximize their adoption potential. We will implement Seva and conduct an intensive, mixed-methods assessment at three diverse Federally Qualified Healthcare Centers in the United States. Our non-concurrent multiple-baseline design includes three periods — pretest (ending in four months of implementation preparation), active Seva implementation, and maintenance — with implementation staggered at six-month intervals across sites. The first site will serve as a pilot clinic. We will track the timing of intervention elements and assess study outcomes within each dimension of the Reach, Effectiveness, Adoption, Implementation, and Maintenance framework, including effects on clinicians, patients, and practices. Our mixed-methods approach will include quantitative (e.g., interrupted time-series analysis of treatment attendance, with clinics as the unit of analysis) and qualitative (e.g., staff interviews regarding adaptations to implementation protocol) methods, and assessment of implementation costs. Discussion If implementation is successful, the field will have a proven technology that helps Federally Qualified Health Centers and affiliated organizations provide addiction treatment and recovery support, as well as a proven strategy for implementing the technology. Seva also has the potential to improve core elements of addiction treatment, such as referral and treatment processes. A mobile technology for addiction treatment and accompanying implementation model could provide a cost-effective means to improve the lives of patients with drug and alcohol problems. Trial registration ClinicalTrials.gov (NCT01963234). PMID:24884976

Integrating addiction treatment into primary care using mobile health technology: protocol for an implementation research study.

PubMed

Quanbeck, Andrew R; Gustafson, David H; Marsch, Lisa A; McTavish, Fiona; Brown, Randall T; Mares, Marie-Louise; Johnson, Roberta; Glass, Joseph E; Atwood, Amy K; McDowell, Helene

2014-05-29

Healthcare reform in the United States is encouraging Federally Qualified Health Centers and other primary-care practices to integrate treatment for addiction and other behavioral health conditions into their practices. The potential of mobile health technologies to manage addiction and comorbidities such as HIV in these settings is substantial but largely untested. This paper describes a protocol to evaluate the implementation of an E-Health integrated communication technology delivered via mobile phones, called Seva, into primary-care settings. Seva is an evidence-based system of addiction treatment and recovery support for patients and real-time caseload monitoring for clinicians. Our implementation strategy uses three models of organizational change: the Program Planning Model to promote acceptance and sustainability, the NIATx quality improvement model to create a welcoming environment for change, and Rogers's diffusion of innovations research, which facilitates adaptations of innovations to maximize their adoption potential. We will implement Seva and conduct an intensive, mixed-methods assessment at three diverse Federally Qualified Healthcare Centers in the United States. Our non-concurrent multiple-baseline design includes three periods - pretest (ending in four months of implementation preparation), active Seva implementation, and maintenance - with implementation staggered at six-month intervals across sites. The first site will serve as a pilot clinic. We will track the timing of intervention elements and assess study outcomes within each dimension of the Reach, Effectiveness, Adoption, Implementation, and Maintenance framework, including effects on clinicians, patients, and practices. Our mixed-methods approach will include quantitative (e.g., interrupted time-series analysis of treatment attendance, with clinics as the unit of analysis) and qualitative (e.g., staff interviews regarding adaptations to implementation protocol) methods, and assessment of implementation costs. If implementation is successful, the field will have a proven technology that helps Federally Qualified Health Centers and affiliated organizations provide addiction treatment and recovery support, as well as a proven strategy for implementing the technology. Seva also has the potential to improve core elements of addiction treatment, such as referral and treatment processes. A mobile technology for addiction treatment and accompanying implementation model could provide a cost-effective means to improve the lives of patients with drug and alcohol problems. ClinicalTrials.gov (NCT01963234).

Mixed-mode crack tip loading and crack deflection in 1D quasicrystals

NASA Astrophysics Data System (ADS)

Wang, Zhibin; Scheel, Johannes; Ricoeur, Andreas

2016-12-01

Quasicrystals (QC) are a new class of materials besides crystals and amorphous solids and have aroused much attention of researchers since they were discovered. This paper presents a generalized fracture theory including the J-integral and crack closure integrals, relations between J1, J2 and the stress intensity factors as well as the implementation of the near-tip stress and displacement solutions of 1D QC. Different crack deflection criteria, i.e. the J-integral and maximum circumferential stress criteria, are investigated for mixed-mode loading conditions accounting for phonon-phason coupling. One focus is on the influence of phason stress intensity factors on crack deflection angles.

Renormalization group equations and the Lifshitz point in noncommutative Landau-Ginsburg theory

NASA Astrophysics Data System (ADS)

Chen, Guang-Hong; Wu, Yong-Shi

2002-02-01

A one-loop renormalization group (RG) analysis is performed for noncommutative Landau-Ginsburg theory in an arbitrary dimension. We adopt a modern version of the Wilsonian RG approach, in which a shell integration in momentum space bypasses the potential IR singularities due to UV-IR mixing. The momentum-dependent trigonometric factors in interaction vertices, characteristic of noncommutative geometry, are marginal under RG transformations, and their marginality is preserved at one loop. A negative Θ-dependent anomalous dimension is discovered as a novel effect of the UV-IR mixing. We also found a noncommutative Wilson-Fisher (NCWF) fixed point in less than four dimensions. At large noncommutativity, a momentum space instability is induced by quantum fluctuations, and a consequential first-order phase transition is identified together with a Lifshitz point in the phase diagram. In the vicinity of the Lifshitz point, we introduce two critical exponents νm and βk, whose values are determined to be 1/4 and 1/2, respectively, at mean-field level.

Design and Optimization of Coin-Shaped Microreactor Chips for PET Radiopharmaceutical Synthesis

PubMed Central

Elizarov, Arkadij M.; van Dam, R. Michael; Shin, Young Shik; Kolb, Hartmuth C.; Padgett, Henry C.; Stout, David; Shu, Jenny; Huang, Jiang; Daridon, Antoine; Heath, James R.

2010-01-01

An integrated elastomeric microfluidic device, with a footprint the size of a postage stamp, has been designed and optimized for multistep radiosynthesis of PET tracers. Methods The unique architecture of the device is centered around a 5-μL coin-shaped reactor, which yields reaction efficiency and speed from a combination of high reagent concentration, pressurized reactions, and rapid heat and mass transfer. Its novel features facilitate mixing, solvent exchange, and product collection. New mixing mechanisms assisted by vacuum, pressure, and chemical reactions are exploited. Results The architecture of the reported reactor is the first that has allowed batch-mode microfluidic devices to produce radiopharmaceuticals of sufficient quality and quantity to be validated by in vivo imaging. Conclusion The reactor has the potential to produce multiple human doses of 18F-FDG; the most impact, however, is expected in the synthesis of PET radiopharmaceuticals that can be made only with low yields by currently available equipment. PMID:20124050

Viologen-modified electrodes for protection of hydrogenases from high potential inactivation while performing H2 oxidation at low overpotential.

PubMed

Oughli, Alaa A; Vélez, Marisela; Birrell, James A; Schuhmann, Wolfgang; Lubitz, Wolfgang; Plumeré, Nicolas; Rüdiger, Olaf

2018-06-08

In this work we present a viologen-modified electrode providing protection for hydrogenases against high potential inactivation. Hydrogenases, including O2-tolerant classes, suffer from reversible inactivation upon applying high potentials, which limits their use in biofuel cells to certain conditions. Our previously reported protection strategy based on the integration of hydrogenase into redox matrices enabled the use of these biocatalysts in biofuel cells even under anode limiting conditions. However, mediated catalysis required application of an overpotential to drive the reaction, and this translates into a power loss in a biofuel cell. In the present work, the enzyme is adsorbed on top of a covalently-attached viologen layer which leads to mixed, direct and mediated, electron transfer processes; at low overpotentials, the direct electron transfer process generates a catalytic current, while the mediated electron transfer through the viologens at higher potentials generates a redox buffer that prevents oxidative inactivation of the enzyme. Consequently, the enzyme starts the catalysis at no overpotential with viologen self-activated protection at high potentials.

Best practices for use of stable isotope mixing models in food-web studies

EPA Science Inventory

Stable isotope mixing models are increasingly used to quantify contributions of resources to consumers. While potentially powerful tools, these mixing models have the potential to be misused, abused, and misinterpreted. Here we draw on our collective experiences to address the qu...

Coupling the Mixed Potential and Radiolysis Models for Used Fuel Degradation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buck, Edgar C.; Jerden, James L.; Ebert, William L.

The primary purpose of this report is to describe the strategy for coupling three process level models to produce an integrated Used Fuel Degradation Model (FDM). The FDM, which is based on fundamental chemical and physical principals, provides direct calculation of radionuclide source terms for use in repository performance assessments. The G-value for H2O2 production (Gcond) to be used in the Mixed Potential Model (MPM) (H2O2 is the only radiolytic product presently included but others will be added as appropriate) needs to account for intermediate spur reactions. The effects of these intermediate reactions on [H2O2] are accounted for in themore » Radiolysis Model (RM). This report details methods for applying RM calculations that encompass the effects of these fast interactions on [H2O2] as the solution composition evolves during successive MPM iterations and then represent the steady-state [H2O2] in terms of an “effective instantaneous or conditional” generation value (Gcond). It is anticipated that the value of Gcond will change slowly as the reaction progresses through several iterations of the MPM as changes in the nature of fuel surface occur. The Gcond values will be calculated with the RM either after several iterations or when concentrations of key reactants reach threshold values determined from previous sensitivity runs. Sensitivity runs with RM indicate significant changes in G-value can occur over narrow composition ranges. The objective of the mixed potential model (MPM) is to calculate the used fuel degradation rates for a wide range of disposal environments to provide the source term radionuclide release rates for generic repository concepts. The fuel degradation rate is calculated for chemical and oxidative dissolution mechanisms using mixed potential theory to account for all relevant redox reactions at the fuel surface, including those involving oxidants produced by solution radiolysis and provided by the radiolysis model (RM). The RM calculates the concentration of species generated at any specific time and location from the surface of the fuel. Several options being considered for coupling the RM and MPM are described in the report. Different options have advantages and disadvantages based on the extent of coding that would be required and the ease of use of the final product.« less

Quasi 1D Modeling of Mixed Compression Supersonic Inlets

NASA Technical Reports Server (NTRS)

Kopasakis, George; Connolly, Joseph W.; Paxson, Daniel E.; Woolwine, Kyle J.

2012-01-01

The AeroServoElasticity task under the NASA Supersonics Project is developing dynamic models of the propulsion system and the vehicle in order to conduct research for integrated vehicle dynamic performance. As part of this effort, a nonlinear quasi 1-dimensional model of the 2-dimensional bifurcated mixed compression supersonic inlet is being developed. The model utilizes computational fluid dynamics for both the supersonic and subsonic diffusers. The oblique shocks are modeled utilizing compressible flow equations. This model also implements variable geometry required to control the normal shock position. The model is flexible and can also be utilized to simulate other mixed compression supersonic inlet designs. The model was validated both in time and in the frequency domain against the legacy LArge Perturbation INlet code, which has been previously verified using test data. This legacy code written in FORTRAN is quite extensive and complex in terms of the amount of software and number of subroutines. Further, the legacy code is not suitable for closed loop feedback controls design, and the simulation environment is not amenable to systems integration. Therefore, a solution is to develop an innovative, more simplified, mixed compression inlet model with the same steady state and dynamic performance as the legacy code that also can be used for controls design. The new nonlinear dynamic model is implemented in MATLAB Simulink. This environment allows easier development of linear models for controls design for shock positioning. The new model is also well suited for integration with a propulsion system model to study inlet/propulsion system performance, and integration with an aero-servo-elastic system model to study integrated vehicle ride quality, vehicle stability, and efficiency.

Customer Service Analysis of Air Combat Command Vehicle Maintenance Support

DTIC Science & Technology

1993-09-01

the survey, the researchers categorized the services or variables into marketing mix components: product, price, promotion, and customer service...comparing and analyzing the variables identified in the previous three phases to determine a strategic marketing mix (46:9). After analyzing the data...service/physical distribution. Additionally, they found that customer service/physical distribution was an integral component of the marketing mix , and

Flume Computer-Aided Design (CAD): Integrated CAD for Microflume Components and Systems

DTIC Science & Technology

2002-04-01

31 3.3: Matching the Mix Ratio (Part B...sizes) will be optimized based on the required flow rates and mixing ratios of the different species. The influence of etch depth is investigated on a...Inhibition Study In this network, the target protein is mixed with protease (i.e. enzyme that cleaves the target protein) and the protease inhibitor (the

Thermospheric Mass Density Specification: Synthesis of Observations and Models

DTIC Science & Technology

2013-10-21

Simulation Experiments (OSSEs) of the column-integrated ratio of atomic oxygen and molecular nitrogen. Note that OSSEs assimilate, for a given...realistic observing system, synthetically generated observational data often sampled from model simulation results, in place of actually observed values...and molecular oxygen mass mixing ratio). Note that in the TIEGCM the molecular nitrogen mass mixing ratio is specified so that the sum of mixing

Multifaceted applications of bile salts in pharmacy: an emphasis on nanomedicine

PubMed Central

Elnaggar, Yosra SR

2015-01-01

The human body has long provided pharmaceutical science with biomaterials of interesting applications. Bile salts (BSs) are biomaterials reminiscent of traditional surfactants with peculiar structure and self-assembled topologies. In the pharmaceutical field, BSs were employed on the basis of two different concepts. The first concept exploited BSs’ metabolic and homeostatic functions in disease modulation, whereas the second one utilized BSs’ potential to modify drug-delivery characteristics, which recently involved nanotechnology. This review is the first to gather major pharmaceutical applications of BSs from endogenous organotropism up to integration into nanomedicine, with a greater focus on the latter domain. Endogenous applications highlighted the role of BS in modulating hypercholesterolemia and cancer therapy in view of enterohepatic circulation. In addition, recent BS-integrated nanomedicines have been surveyed, chiefly size-tunable cholate nanoparticles, BS-lecithin mixed micelles, bilosomes, probilosomes, and surface-engineered bilosomes. A greater emphasis has been laid on nanosystems for vaccine and cancer therapy. The comparative advantages of BS-integrated nanomedicines over conventional nanocarriers have been noted. Paradoxical effects, current pitfalls, future perspectives, and opinions have also been outlined. PMID:26109855

Loop Shaping Control Design for a Supersonic Propulsion System Model Using Quantitative Feedback Theory (QFT) Specifications and Bounds

NASA Technical Reports Server (NTRS)

Connolly, Joseph W.; Kopasakis, George

2010-01-01

This paper covers the propulsion system component modeling and controls development of an integrated mixed compression inlet and turbojet engine that will be used for an overall vehicle Aero-Propulso-Servo-Elastic (APSE) model. Using previously created nonlinear component-level propulsion system models, a linear integrated propulsion system model and loop shaping control design have been developed. The design includes both inlet normal shock position control and jet engine rotor speed control for a potential supersonic commercial transport. A preliminary investigation of the impacts of the aero-elastic effects on the incoming flow field to the propulsion system are discussed, however, the focus here is on developing a methodology for the propulsion controls design that prevents unstart in the inlet and minimizes the thrust oscillation experienced by the vehicle. Quantitative Feedback Theory (QFT) specifications and bounds, and aspects of classical loop shaping are used in the control design process. Model uncertainty is incorporated in the design to address possible error in the system identification mapping of the nonlinear component models into the integrated linear model.

Passive micromixer for luminol-peroxide chemiluminescence detection.

PubMed

Lok, Khoi Seng; Kwok, Yien Chian; Nguyen, Nam-Trung

2011-06-21

This paper reports a microchip with an integrated passive micromixer based on chaotic advection. The micromixer with staggered herringbone structures was used for luminol-peroxide chemiluminescence detection. The micromixer was examined to assess its suitability for chemiluminescence reaction. The relationship between the flow rate and the location of maximum chemiluminescence intensity was investigated. The light intensity was detected using an optical fiber attached along the mixing channel and a photon detector. A linear correlation between chemiluminescence intensity and the concentration of cobalt(ii) ions or hydrogen peroxide was observed. This microchip has a potential application in environmental monitoring for industries involved in heavy metals and in medical diagnostics.

User Preferences and Design Recommendations for an mHealth App to Promote Cystic Fibrosis Self-Management

PubMed Central

Hilliard, Marisa E; Hahn, Amy; Ridge, Alana K; Eakin, Michelle N

2014-01-01

Background mHealth apps hold potential to provide automated, tailored support for treatment adherence among individuals with chronic medical conditions. Yet relatively little empirical research has guided app development and end users are infrequently involved in designing the app features or functions that would best suit their needs. Self-management apps may be particularly useful for people with chronic conditions like cystic fibrosis (CF) that have complex, demanding regimens. Objective The aim of this mixed-methods study was to involve individuals with CF in guiding the development of engaging, effective, user-friendly adherence promotion apps that meet their preferences and self-management needs. Methods Adults with CF (n=16, aged 21-48 years, 50% male) provided quantitative data via a secure Web survey and qualitative data via semi-structured telephone interviews regarding previous experiences using apps in general and for health, and preferred and unwanted features of potential future apps to support CF self-management. Results Participants were smartphone users who reported sending or receiving text messages (93%, 14/15) or emails (80%, 12/15) on their smartphone or device every day, and 87% (13/15) said it would be somewhat or very hard to give up their smartphone. Approximately one-half (53%, 8/15) reported having health apps, all diet/weight-related, yet many reported that existing nutrition apps were not well-suited for CF management. Participants wanted apps to support CF self-management with characteristics such as having multiple rather than single functions (eg, simple alarms), being specific to CF, and minimizing user burden. Common themes for desired CF app features were having information at one’s fingertips, automation of disease management activities such as pharmacy refills, integration with smartphones’ technological capabilities, enhancing communication with health care team, and facilitating socialization within the CF community. Opinions were mixed regarding gamification and earning rewards or prizes. Participants emphasized the need for customization options to meet individual preferences and disease management goals. Conclusions Unique capabilities of emerging smartphone technologies (eg, social networking integration, movement and location detection, integrated sensors, or electronic monitors) make many of these requests possible. Involving end users in all stages of mHealth app development and collaborating with technology experts and the health care system may result in apps that maintain engagement, improve integration and automation, and ultimately impact self-management and health outcomes. PMID:25344616

A novel adaptive mixed reality system for stroke rehabilitation: principles, proof of concept, and preliminary application in 2 patients.

PubMed

Chen, Yinpeng; Duff, Margaret; Lehrer, Nicole; Liu, Sheng-Min; Blake, Paul; Wolf, Steven L; Sundaram, Hari; Rikakis, Thanassis

2011-01-01

This article presents the principles of an adaptive mixed reality rehabilitation (AMRR) system, as well as the training process and results from 2 stroke survivors who received AMRR therapy, to illustrate how the system can be used in the clinic. The AMRR system integrates traditional rehabilitation practices with state-of-the-art computational and motion capture technologies to create an engaging environment to train reaching movements. The system provides real-time, intuitive, and integrated audio and visual feedback (based on detailed kinematic data) representative of goal accomplishment, activity performance, and body function during a reaching task. The AMRR system also provides a quantitative kinematic evaluation that measures the deviation of the stroke survivor's movement from an idealized, unimpaired movement. The therapist, using the quantitative measure and knowledge and observations, can adapt the feedback and physical environment of the AMRR system throughout therapy to address each participant's individual impairments and progress. Individualized training plans, kinematic improvements measured over the entire therapy period, and the changes in relevant clinical scales and kinematic movement attributes before and after the month-long therapy are presented for 2 participants. The substantial improvements made by both participants after AMRR therapy demonstrate that this system has the potential to considerably enhance the recovery of stroke survivors with varying impairments for both kinematic improvements and functional ability.

The Academic Study of Religions and Integrative Religious Education in Europe

ERIC Educational Resources Information Center

Alberts, Wanda

2010-01-01

The article provides an overview of the book "Integrative religious education in Europe: A study-of-religions approach" (2007). It introduces the notion of "integrative religious education (RE)", relating to education about different religions in religiously mixed classrooms, as opposed to separative confessional approaches.…

On accommodating spatial interactions in a Generalized Heterogeneous Data Model (GHDM) of mixed types of dependent variables.

DOT National Transportation Integrated Search

2015-12-01

We develop an econometric framework for incorporating spatial dependence in integrated model systems of latent variables and multidimensional mixed data outcomes. The framework combines Bhats Generalized Heterogeneous Data Model (GHDM) with a spat...

APT-ALF testing at LTRC in Louisiana : summary report.

DOT National Transportation Integrated Search

2012-09-01

As an integral part of Study 0-6132, the primary objectives of this task included the following: : 1) To validate the new generation mix-design procedure (balanced) under APT testing using the ALF machine. : 2) To compare the HMA mix performance desi...

Electromagnetic mixed waste processing system for asbestos decontamination

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kasevich, R.S.; Vaux, W.; Ulerich, N.

The overall objective of this three-phase program is to develop an integrated process for treating asbestos-containing material that is contaminated with radioactive and hazardous constituents. The integrated process will attempt to minimize processing and disposal costs. The objectives of Phase 1 were to establish the technical feasibility of asbestos decomposition, inorganic radionuclide nd heavy metal removal, and organic volatilization. Phase 1 resulted in the successful bench-scale demonstration of the elements required to develop a mixed waste treatment process for asbestos-containing material (ACM) contaminated with radioactive metals, heavy metals, and organics. Using the Phase 1 data, a conceptual process was developed.more » The Phase 2 program, currently in progress, is developing an integrated system design for ACM waste processing. The Phase 3 program will target demonstration of the mixed waste processing system at a DOE facility. The electromagnetic mixed waste processing system employs patented technologies to convert DOE asbestos to a non-hazardous, radionuclide-free, stable waste. The dry, contaminated asbestos is initially heated with radiofrequency energy to remove organic volatiles. Second,the radionuclides are removed by solvent extraction coupled with ion exchange solution treatment. Third, the ABCOV method converts the asbestos to an amorphous silica suspension at low temperature (100{degrees}C). Finally the amorphous silica is solidified for disposal.« less

A Mixed Methods Comparison of Teacher Education Faculty Perceptions of the Integration of Technology into Their Courses and Student Feedback on Technology Proficiency

ERIC Educational Resources Information Center

Teclehaimanot, Berhane; Mentzer, Gale; Hickman, Torey

2011-01-01

Results from previous studies on pre-service teacher technology integration and faculty perceptions of technology integration within the teacher education program at a medium-sized, Midwestern university are compared to account for the self-reported lack of confidence pre-service teachers have integrating technology into their teaching. Also…

A demonstration of mixed-methods research in the health sciences.

PubMed

Katz, Janet; Vandermause, Roxanne; McPherson, Sterling; Barbosa-Leiker, Celestina

2016-11-18

Background The growth of patient, community and population-centred nursing research is a rationale for the use of research methods that can examine complex healthcare issues, not only from a biophysical perspective, but also from cultural, psychosocial and political viewpoints. This need for multiple perspectives requires mixed-methods research. Philosophy and practicality are needed to plan, conduct, and make mixed-methods research more broadly accessible to the health sciences research community. The traditions and dichotomy between qualitative and quantitative research makes the application of mixed methods a challenge. Aim To propose an integrated model for a research project containing steps from start to finish, and to use the unique strengths brought by each approach to meet the health needs of patients and communities. Discussion Mixed-methods research is a practical approach to inquiry, that focuses on asking questions and how best to answer them to improve the health of individuals, communities and populations. An integrated model of research begins with the research question(s) and moves in a continuum. The lines dividing methods do not dissolve, but become permeable boundaries where two or more methods can be used to answer research questions more completely. Rigorous and expert methodologists work together to solve common problems. Conclusion Mixed-methods research enables discussion among researchers from varied traditions. There is a plethora of methodological approaches available. Combining expertise by communicating across disciplines and professions is one way to tackle large and complex healthcare issues. Implications for practice The model presented in this paper exemplifies the integration of multiple approaches in a unified focus on identified phenomena. The dynamic nature of the model signals a need to be open to the data generated and the methodological directions implied by findings.

Text-in-context: a method for extracting findings in mixed-methods mixed research synthesis studies.

PubMed

Sandelowski, Margarete; Leeman, Jennifer; Knafl, Kathleen; Crandell, Jamie L

2013-06-01

Our purpose in this paper is to propose a new method for extracting findings from research reports included in mixed-methods mixed research synthesis studies. International initiatives in the domains of systematic review and evidence synthesis have been focused on broadening the conceptualization of evidence, increased methodological inclusiveness and the production of evidence syntheses that will be accessible to and usable by a wider range of consumers. Initiatives in the general mixed-methods research field have been focused on developing truly integrative approaches to data analysis and interpretation. The data extraction challenges described here were encountered, and the method proposed for addressing these challenges was developed, in the first year of the ongoing (2011-2016) study: Mixed-Methods Synthesis of Research on Childhood Chronic Conditions and Family. To preserve the text-in-context of findings in research reports, we describe a method whereby findings are transformed into portable statements that anchor results to relevant information about sample, source of information, time, comparative reference point, magnitude and significance and study-specific conceptions of phenomena. The data extraction method featured here was developed specifically to accommodate mixed-methods mixed research synthesis studies conducted in nursing and other health sciences, but reviewers might find it useful in other kinds of research synthesis studies. This data extraction method itself constitutes a type of integration to preserve the methodological context of findings when statements are read individually and in comparison to each other. © 2012 Blackwell Publishing Ltd.

Perceptions of Black Parents in an Undesegregated Subdistrict of an Integrated School System

ERIC Educational Resources Information Center

Sobol, Marion G.; Beck, William W.

1978-01-01

A majority of parents whose children attended segregated schools in a court-ordered integrated school system felt that mixed schools offer better educational opportunities than do segregated schools. (Author)

Natural Assurance Scheme: A level playing field framework for Green-Grey infrastructure development.

PubMed

Denjean, Benjamin; Altamirano, Mónica A; Graveline, Nina; Giordano, Raffaele; van der Keur, Peter; Moncoulon, David; Weinberg, Josh; Máñez Costa, María; Kozinc, Zdravko; Mulligan, Mark; Pengal, Polona; Matthews, John; van Cauwenbergh, Nora; López Gunn, Elena; Bresch, David N

2017-11-01

This paper proposes a conceptual framework to systematize the use of Nature-based solutions (NBS) by integrating their resilience potential into Natural Assurance Scheme (NAS), focusing on insurance value as corner stone for both awareness-raising and valuation. As such one of its core goal is to align research and pilot projects with infrastructure development constraints and priorities. Under NAS, the integrated contribution of natural infrastructure to Disaster Risk Reduction is valued in the context of an identified growing need for climate robust infrastructure. The potential of NAS benefits and trade-off are explored by through the alternative lens of Disaster Resilience Enhancement (DRE). Such a system requires a joint effort of specific knowledge transfer from research groups and stakeholders to potential future NAS developers and investors. We therefore match the knowledge gaps with operational stages of the development of NAS from a project designer perspective. We start by highlighting the key role of the insurance industry in incentivizing and assessing disaster and slow onset resilience enhancement strategies. In parallel we place the public sector as potential kick-starters in DRE initiatives through the existing initiatives and constraints of infrastructure procurement. Under this perspective the paper explores the required alignment of Integrated Water resources planning and Public investment systems. Ultimately this will provide the possibility for both planners and investors to design no regret NBS and mixed Grey-Green infrastructures systems. As resources and constraints are widely different between infrastructure development contexts, the framework does not provide explicit methodological choices but presents current limits of knowledge and know-how. In conclusion the paper underlines the potential of NAS to ease the infrastructure gap in water globally by stressing the advantages of investment in the protection, enhancement and restoration of natural capital as an effective climate change adaptation investment. Copyright © 2017. Published by Elsevier Inc.

Energy correlations of photon pairs generated by a silicon microring resonator probed by Stimulated Four Wave Mixing.

PubMed

Grassani, Davide; Simbula, Angelica; Pirotta, Stefano; Galli, Matteo; Menotti, Matteo; Harris, Nicholas C; Baehr-Jones, Tom; Hochberg, Michael; Galland, Christophe; Liscidini, Marco; Bajoni, Daniele

2016-04-01

Compact silicon integrated devices, such as micro-ring resonators, have recently been demonstrated as efficient sources of quantum correlated photon pairs. The mass production of integrated devices demands the implementation of fast and reliable techniques to monitor the device performances. In the case of time-energy correlations, this is particularly challenging, as it requires high spectral resolution that is not currently achievable in coincidence measurements. Here we reconstruct the joint spectral density of photons pairs generated by spontaneous four-wave mixing in a silicon ring resonator by studying the corresponding stimulated process, namely stimulated four wave mixing. We show that this approach, featuring high spectral resolution and short measurement times, allows one to discriminate between nearly-uncorrelated and highly-correlated photon pairs.

Microfluidic Serial Dilution Circuit

PubMed Central

Paegel, Brian M.; Grover, William H.; Skelley, Alison M.; Mathies, Richard A.; Joyce, Gerald F.

2008-01-01

In vitro evolution of RNA molecules requires a method for executing many consecutive serial dilutions. To solve this problem, a microfluidic circuit has been fabricated in a three-layer glass-PDMS-glass device. The 400-nL serial dilution circuit contains five integrated membrane valves: three two-way valves arranged in a loop to drive cyclic mixing of the diluent and carryover, and two bus valves to control fluidic access to the circuit through input and output channels. By varying the valve placement in the circuit, carryover fractions from 0.04 to 0.2 were obtained. Each dilution process, which is comprised of a diluent flush cycle followed by a mixing cycle, is carried out with no pipeting, and a sample volume of 400 nL is sufficient for conducting an arbitrary number of serial dilutions. Mixing is precisely controlled by changing the cyclic pumping rate, with a minimum mixing time of 22 s. This microfluidic circuit is generally applicable for integrating automated serial dilution and sample preparation in almost any microfluidic architecture. PMID:17073422

The MHOST finite element program: 3-D inelastic analysis methods for hot section components. Volume 1: Theoretical manual

NASA Technical Reports Server (NTRS)

Nakazawa, Shohei

1991-01-01

Formulations and algorithms implemented in the MHOST finite element program are discussed. The code uses a novel concept of the mixed iterative solution technique for the efficient 3-D computations of turbine engine hot section components. The general framework of variational formulation and solution algorithms are discussed which were derived from the mixed three field Hu-Washizu principle. This formulation enables the use of nodal interpolation for coordinates, displacements, strains, and stresses. Algorithmic description of the mixed iterative method includes variations for the quasi static, transient dynamic and buckling analyses. The global-local analysis procedure referred to as the subelement refinement is developed in the framework of the mixed iterative solution, of which the detail is presented. The numerically integrated isoparametric elements implemented in the framework is discussed. Methods to filter certain parts of strain and project the element discontinuous quantities to the nodes are developed for a family of linear elements. Integration algorithms are described for linear and nonlinear equations included in MHOST program.

Ethanol fermentation characteristics of recycled water by Saccharomyces cerevisiae in an integrated ethanol-methane fermentation process.

PubMed

Yang, Xinchao; Wang, Ke; Wang, Huijun; Zhang, Jianhua; Mao, Zhonggui

2016-11-01

An process of integrated ethanol-methane fermentation with improved economics has been studied extensively in recent years, where the process water used for a subsequent fermentation of carbohydrate biomass is recycled. This paper presents a systematic study of the ethanol fermentation characteristics of recycled process water. Compared with tap water, fermentation time was shortened by 40% when mixed water was employed. However, while the maximal ethanol production rate increased from 1.07g/L/h to 2.01g/L/h, ethanol production was not enhanced. Cell number rose from 0.6×10(8) per mL in tap water to 1.6×10(8) per mL in mixed water but although biomass increased, cell morphology was not affected. Furthermore, the use of mixed water increased the glycerol yield but decreased that of acetic acid, and the final pH with mixed water was higher than when using tap water. Copyright © 2016 Elsevier Ltd. All rights reserved.

Computation of Anisotropic Bi-Material Interfacial Fracture Parameters and Delamination Creteria

NASA Technical Reports Server (NTRS)

Chow, W-T.; Wang, L.; Atluri, S. N.

1998-01-01

This report documents the recent developments in methodologies for the evaluation of the integrity and durability of composite structures, including i) the establishment of a stress-intensity-factor based fracture criterion for bimaterial interfacial cracks in anisotropic materials (see Sec. 2); ii) the development of a virtual crack closure integral method for the evaluation of the mixed-mode stress intensity factors for a bimaterial interfacial crack (see Sec. 3). Analytical and numerical results show that the proposed fracture criterion is a better fracture criterion than the total energy release rate criterion in the characterization of the bimaterial interfacial cracks. The proposed virtual crack closure integral method is an efficient and accurate numerical method for the evaluation of mixed-mode stress intensity factors.

Collaborating across the Departments of Veterans Affairs and Defense to integrate mental health and chaplaincy services.

PubMed

Nieuwsma, Jason A; Jackson, George L; DeKraai, Mark B; Bulling, Denise J; Cantrell, William C; Rhodes, Jeffrey E; Bates, Mark J; Ethridge, Keith; Lane, Marian E; Tenhula, Wendy N; Batten, Sonja V; Meador, Keith G

2014-12-01

Recognizing that clergy and spiritual care providers are a key part of mental health care systems, the Department of Veterans Affairs (VA) and Department of Defense (DoD) jointly examined chaplains' current and potential roles in caring for veterans and service members with mental health needs. Our aim was to evaluate the intersection of chaplain and mental health care practices in VA and DoD in order to determine if improvement is needed, and if so, to develop actionable recommendations as indicated by evaluation findings. A 38-member multidisciplinary task group partnered with researchers in designing, implementing, and interpreting a mixed methods study that included: 1) a quantitative survey of VA and DoD chaplains; and 2) qualitative interviews with mental health providers and chaplains. Quantitative: the survey included all full-time VA chaplains and all active duty military chaplains (n = 2,163 completed of 3,464 invited; 62 % response rate). Qualitative: a total of 291 interviews were conducted with mental health providers and chaplains during site visits to 33 VA and DoD facilities. Quantitative: the online survey assessed intersections between chaplaincy and mental health care and took an average of 37 min to complete. Qualitative: the interviews assessed current integration of mental health and chaplain services and took an average of 1 h to complete. When included on interdisciplinary mental health care teams, chaplains feel understood and valued (82.8-100 % of chaplains indicated this, depending on the team). However, findings from the survey and site visits suggest that integration of services is often lacking and can be improved. Closely coordinating with a multidisciplinary task group in conducting a mixed method evaluation of chaplain-mental health integration in VA and DoD helped to ensure that researchers assessed relevant domains and that findings could be rapidly translated into actionable recommendations.

The professional role of massage therapists in patient care in Canadian urban hospitals--a mixed methods study.

PubMed

Kania-Richmond, Ania; Reece, Barb Findlay; Suter, Esther; Verhoef, Marja J

2015-02-07

Massage therapy (MT) is becoming established as a recognized health care profession in Canada. It has been integrated as a core service in settings such as health spas, private integrative health centers, and there is indication that MT is starting to be integrated into hospitals. Research in the area of hospital-based MT has primarily focused on the efficacy, effectiveness, and increasingly, the safety of MT. However, little is known about the professional role of massage therapists in the hospital setting. The purpose of this study was to conduct an in-depth exploration and description of massage therapists' professional role in patient care in the context of Canadian urban hospitals. A sequential mixed methods study design was used. For the quantitative phase, a survey was sent to urban hospitals where MT services were organized by hospitals and provided by licensed massage therapists to patients to a) provide a contextual description of the hospitals and b) identify a sampling frame for the qualitative phase. The subsequent qualitative phase entailed semi structured interviews with a purposively diverse sample of participants massage therapists from the surveyed sites to explore their role perceptions. The quantitative and qualitative approaches were integrated during data collection and analysis. Of the hospitals that responded, sixteen urban hospitals across Canada (5%) provided MT to patients by licensed therapists. The majority of hospitals were located in Ontario and ranged from specialized small community hospitals to large multi-site hospitals. Based on interviews with 25 participants, six components of the massage therapists' professional role emerged: health care provider, team member, program support, educator, promoter of the profession, and researcher. While hospital-based MT in Canada is not a new phenomenon, MT is not yet an established health care profession in such settings. However, there is significant potential for the inclusion of the massage therapists' role in Canadian hospitals that should be evidence based for effective implementation.

General Methods for Evolutionary Quantitative Genetic Inference from Generalized Mixed Models.

PubMed

de Villemereuil, Pierre; Schielzeth, Holger; Nakagawa, Shinichi; Morrissey, Michael

2016-11-01

Methods for inference and interpretation of evolutionary quantitative genetic parameters, and for prediction of the response to selection, are best developed for traits with normal distributions. Many traits of evolutionary interest, including many life history and behavioral traits, have inherently nonnormal distributions. The generalized linear mixed model (GLMM) framework has become a widely used tool for estimating quantitative genetic parameters for nonnormal traits. However, whereas GLMMs provide inference on a statistically convenient latent scale, it is often desirable to express quantitative genetic parameters on the scale upon which traits are measured. The parameters of fitted GLMMs, despite being on a latent scale, fully determine all quantities of potential interest on the scale on which traits are expressed. We provide expressions for deriving each of such quantities, including population means, phenotypic (co)variances, variance components including additive genetic (co)variances, and parameters such as heritability. We demonstrate that fixed effects have a strong impact on those parameters and show how to deal with this by averaging or integrating over fixed effects. The expressions require integration of quantities determined by the link function, over distributions of latent values. In general cases, the required integrals must be solved numerically, but efficient methods are available and we provide an implementation in an R package, QGglmm. We show that known formulas for quantities such as heritability of traits with binomial and Poisson distributions are special cases of our expressions. Additionally, we show how fitted GLMM can be incorporated into existing methods for predicting evolutionary trajectories. We demonstrate the accuracy of the resulting method for evolutionary prediction by simulation and apply our approach to data from a wild pedigreed vertebrate population. Copyright © 2016 de Villemereuil et al.

32 CFR 158.4 - Policy.

Code of Federal Regulations, 2013 CFR

2013-07-01

... program management processes during applicable contingency operations. (2) Comply with applicable U.S..., “Policy and Procedures for Determining Workforce Mix.” (4) Fully consider, plan for, integrate, and execute acquisition of, contracted support, including synchronizing and integrating contracted support...

32 CFR 158.4 - Policy.

Code of Federal Regulations, 2012 CFR

2012-07-01

... program management processes during applicable contingency operations. (2) Comply with applicable U.S..., “Policy and Procedures for Determining Workforce Mix.” (4) Fully consider, plan for, integrate, and execute acquisition of, contracted support, including synchronizing and integrating contracted support...

32 CFR 158.4 - Policy.

Code of Federal Regulations, 2014 CFR

2014-07-01

... program management processes during applicable contingency operations. (2) Comply with applicable U.S..., “Policy and Procedures for Determining Workforce Mix.” (4) Fully consider, plan for, integrate, and execute acquisition of, contracted support, including synchronizing and integrating contracted support...

Human Integration through Olympism Education: A Pragmatic Engagement of Youths in a War-Torn Society

ERIC Educational Resources Information Center

Nanayakkara, Samantha

2016-01-01

This paper delineates the findings of a mixed methods study that investigated how Olympism education could strengthen competencies of human integration through delivery of physical, social, and critical literacy and conflict resolution literacy. The study introduced a curriculum model integrating Olympism values and conflict resolution strategies…

Leading Integrated Schools: A Study of the Multicultural Perspectives of Northern Irish Principals

ERIC Educational Resources Information Center

McGlynn, Claire

2008-01-01

This article is concerned with the sustained peace education initiative of integrated schooling and in particular with leadership responses to cultural diversity. Using a case study group of principals of integrated (mixed Catholic, Protestant and other) schools in Northern Ireland, the author explores how principals perceive and lead their…

An integral turbulent kinetic energy analysis of free shear flows

NASA Technical Reports Server (NTRS)

Peters, C. E.; Phares, W. J.

1973-01-01

Mixing of coaxial streams is analyzed by application of integral techniques. An integrated turbulent kinetic energy (TKE) equation is solved simultaneously with the integral equations for the mean flow. Normalized TKE profile shapes are obtained from incompressible jet and shear layer experiments and are assumed to be applicable to all free turbulent flows. The shear stress at the midpoint of the mixing zone is assumed to be directly proportional to the local TKE, and dissipation is treated with a generalization of the model developed for isotropic turbulence. Although the analysis was developed for ducted flows, constant-pressure flows were approximated with the duct much larger than the jet. The axisymmetric flows under consideration were predicted with reasonable accuracy. Fairly good results were also obtained for the fully developed two-dimensional shear layers, which were computed as thin layers at the boundary of a large circular jet.

Anthropogenic carbon in the ocean—Surface to interior connections

NASA Astrophysics Data System (ADS)

Groeskamp, Sjoerd; Lenton, Andrew; Matear, Richard; Sloyan, Bernadette M.; Langlais, Clothilde

2016-11-01

Quantifying the surface to interior transport of anthropogenic carbon (CA) is critical for projecting future carbon uptake and for improved understanding of the role of the oceans in the global carbon cycle. Here we develop and apply a diagnostic tool that provides a volumetric stream function in (CA,σ0) coordinates to calculate the total diapycnal CA transport in the ocean, where σ0 is the surface referenced potential density anomaly. We combine this with air-sea fluxes of CA to infer the internal ocean mixing of CA to obtain a closed globally integrated budget analyses of the ocean's CA transport. This diagnostic separates the contribution from the mean flow, seasonal cycles, trend, surface fluxes, and mixing in the distribution and the accumulation of CA in the ocean. We find that the redistribution of CA from the surface to the interior of the ocean is due to an interplay between circulation and mixing. The circulation component is dominated by the mean flow; however, effects due to seasonal cycles are significant for the CA redistribution. The two most important pathways for CA subduction are through the transformation of thermocline water (TW) into subantarctic mode water and by transformation of Circumpolar Deep Water (CDW) into lighter Antarctic Intermediate Water. The results suggest that an accurate representation of intermediate and mode water formation, deep water formation, and spatial and temporal distribution of ocean mixing in ocean models is essential to simulate and project the oceanic uptake of CA.

An analysis of a large dataset on immigrant integration in Spain. The Statistical Mechanics perspective on Social Action

NASA Astrophysics Data System (ADS)

Barra, Adriano; Contucci, Pierluigi; Sandell, Rickard; Vernia, Cecilia

2014-02-01

How does immigrant integration in a country change with immigration density? Guided by a statistical mechanics perspective we propose a novel approach to this problem. The analysis focuses on classical integration quantifiers such as the percentage of jobs (temporary and permanent) given to immigrants, mixed marriages, and newborns with parents of mixed origin. We find that the average values of different quantifiers may exhibit either linear or non-linear growth on immigrant density and we suggest that social action, a concept identified by Max Weber, causes the observed non-linearity. Using the statistical mechanics notion of interaction to quantitatively emulate social action, a unified mathematical model for integration is proposed and it is shown to explain both growth behaviors observed. The linear theory instead, ignoring the possibility of interaction effects would underestimate the quantifiers up to 30% when immigrant densities are low, and overestimate them as much when densities are high. The capacity to quantitatively isolate different types of integration mechanisms makes our framework a suitable tool in the quest for more efficient integration policies.

Results of a preliminary investigation of inlet unstart on a high-speed civil transport airplane concept

NASA Technical Reports Server (NTRS)

Domack, Christopher S.

1992-01-01

The aircraft design engineer of today is tasked with satisfying an increasing number of conflicting requirements. The fact that conflict in these requirements may be technically, economically, or politically motivated usually compounds the difficulty of determining the best solution to a design issue. In this regard, propulsion/airframe integration for supersonic airplanes must rank as one of the most challenging aspects of airplane design. For the cruise Mach numbers currently being considered for High-Speed Civil Transport (HSCT) airplanes, the inlet requirements of low drag, low bleed flow, and high pressure recovery appear to be best met with a mixed-compression design. Unfortunately, these desirable attributes come with a highly undesirable companion: the inlet unstart phenomenon. Concern over the effects of a mixed-compression inlet unstart on the vehicle dynamics of large, high-speed aircraft is not new; a comprehensive wind-tunnel study addressing the problem was published in 1962. Additional investigations of the problem were made throughout the United States SST program and the follow-on NASA program into the late 1970's. The current study sought to examine the magnitude of the problem in order to determine if an inlet unstart posed a potential hazard severe enough to preclude the use of mixed-compression inlets on proposed HSCT concepts.

Evaluating a culturally tailored peer-mentoring and education pilot intervention among Chinese breast cancer survivors using a mixed-methods approach.

PubMed

Lu, Qian; You, Jin; Man, Jenny; Loh, Alice; Young, Lucy

2014-11-01

To evaluate a social support intervention that was culturally tailored for Chinese Americans who face many challenges because of cultural and linguistic barriers. Intervention with a one-group pre- or post-test design, mixed methods, and a community-based participatory research (CBPR) approach. Southern California. 14 Chinese American breast cancer survivors post-treatment and eight breast cancer peer mentors. The intervention was a 10-week program to provide emotional and informational support through peer mentoring and education. Health outcomes were assessed before and after the intervention. Eight weekly process evaluations and two focus group interviews also were conducted. Depressive and anxiety symptoms. The program was associated with a decrease in depressive symptoms. Participants valued the program highly. Inductive analysis suggested possible mechanisms for effectiveness, such as reducing stigma, empowerment, and increased sense of belonging. The peer-mentoring and education program has the potential to serve as a model intervention for ethnic minorities. Mixed methods and CBPR are valuable in evaluating pilot interventions with minorities. Focusing on relationships may be fruitful for designing novel interventions for cancer survivors from collectivistic cultures. Peer-mentoring and education programs can be integrated into communities and clinics to improve care for underserved minority cancer survivors and to reduce health disparities.

High-speed flight propulsion systems. Progress in Astronautics and Aeronautics. Vol. 137

DOE Office of Scientific and Technical Information (OSTI.GOV)

Murthy, S.N.B.; Curran, E.T.

1991-01-01

Various papers on high-speed flight propulsion systems are presented. The topics addressed are: propulsion systems from takeoff to high-speed flight, propulsion system performance and integration for high Mach air-breathing flight, energy analysis of high-speed flight systems, waves and thermodynamics in high Mach number propulsive ducts, turbulent free shear layer mixing and combustion, turbulent mixing in supersonic combustion systems, mixing and mixing enhancement in supersonic reacting flowfields, study of combustion and heat-exchange processes in high-enthalpy short-duration facilities, and facility requirements for hypersonic propulsion system testing.

Enhanced Eddy-Current Detection Of Weld Flaws

NASA Technical Reports Server (NTRS)

Van Wyk, Lisa M.; Willenberg, James D.

1992-01-01

Mixing of impedances measured at different frequencies reduces noise and helps reveal flaws. In new method, one excites eddy-current probe simultaneously at two different frequencies; usually, one of which integral multiple of other. Resistive and reactive components of impedance of eddy-current probe measured at two frequencies, mixed in computer, and displayed in real time on video terminal of computer. Mixing of measurements obtained at two different frequencies often "cleans up" displayed signal in situations in which band-pass filtering alone cannot: mixing removes most noise, and displayed signal resolves flaws well.

Point-of-care detection and real-time monitoring of intravenously delivered drugs via tubing with an integrated SERS sensor

NASA Astrophysics Data System (ADS)

Wu, Hsin-Yu; Cunningham, Brian T.

2014-04-01

We demonstrate an approach for detection, identification, and kinetic monitoring of drugs flowing within tubing, through the use of a plasmonic nanodome array (PNA) surface. The PNA structures are fabricated using a low-cost nanoreplica molding process upon a flexible plastic substrate that is subsequently integrated with a flow cell that connects in series with ordinary intravenous (IV) drug delivery tubing. To investigate the potential clinical applications for point-of-care detection and real-time monitoring, we perform SERS detection of ten pharmaceutical compounds (hydrocodone, levorphanol, morphine, oxycodone, methadone, phenobarbital, dopamine, diltiazem, promethazine, and mitoxantrone). We demonstrate dose-dependent SERS signal magnitude, resulting in detection limits (ng ml-1) well below typical administered dosages (mg ml-1). Further, we show that the detected drugs are not permanently attached to the PNA surface, and thus our approach is capable of performing continuous monitoring of drug delivery as materials flow through IV tubing that is connected in series with the sensor. Finally, we demonstrate the potential co-detection of multiple drugs when they are mixed together, and show excellent reproducibility and stability of SERS measurements for periods extending at least five days. The capabilities reported here demonstrate the potential to use PNA SERS surfaces for enhancing the safety of IV drug delivery.We demonstrate an approach for detection, identification, and kinetic monitoring of drugs flowing within tubing, through the use of a plasmonic nanodome array (PNA) surface. The PNA structures are fabricated using a low-cost nanoreplica molding process upon a flexible plastic substrate that is subsequently integrated with a flow cell that connects in series with ordinary intravenous (IV) drug delivery tubing. To investigate the potential clinical applications for point-of-care detection and real-time monitoring, we perform SERS detection of ten pharmaceutical compounds (hydrocodone, levorphanol, morphine, oxycodone, methadone, phenobarbital, dopamine, diltiazem, promethazine, and mitoxantrone). We demonstrate dose-dependent SERS signal magnitude, resulting in detection limits (ng ml-1) well below typical administered dosages (mg ml-1). Further, we show that the detected drugs are not permanently attached to the PNA surface, and thus our approach is capable of performing continuous monitoring of drug delivery as materials flow through IV tubing that is connected in series with the sensor. Finally, we demonstrate the potential co-detection of multiple drugs when they are mixed together, and show excellent reproducibility and stability of SERS measurements for periods extending at least five days. The capabilities reported here demonstrate the potential to use PNA SERS surfaces for enhancing the safety of IV drug delivery. Electronic supplementary information (ESI) available: Fabrication of PNA substrates, fabrication details of the flow cell, details of FDTD simulation, characterization of the scattering volume, and detection of diltiazem diluted in DI water and PBS. See DOI: 10.1039/c4nr00027g

The Mixed Effects Trend Vector Model

ERIC Educational Resources Information Center

de Rooij, Mark; Schouteden, Martijn

2012-01-01

Maximum likelihood estimation of mixed effect baseline category logit models for multinomial longitudinal data can be prohibitive due to the integral dimension of the random effects distribution. We propose to use multidimensional unfolding methodology to reduce the dimensionality of the problem. As a by-product, readily interpretable graphical…

Controls on Water Storage, Mixing and Release in a Nested Catchment Set-up with Clean and Mixed Physiographic Characteristics

NASA Astrophysics Data System (ADS)

Pfister, L.; McDonnell, J.; Hissler, C.; Martínez-Carreras, N.; Klaus, J.

2015-12-01

With catchment water storage being only rarely determined, storage dynamics remain largely unknown to date. However, storage bears considerable potential for catchment inter-comparison exercises, as well as it is likely to have an important role in regulating catchment functions. Catchment comparisons across a wide range of environments and scales will help to increase our understanding of relationships between storage dynamics and catchment processes. With respect to the potential of catchment storage for bringing new momentum to catchment classification and catchment processes understanding we currently investigate spatial and temporal variability of dynamic storage in a nested catchment set-up (16 catchments) of the Alzette River basin (Luxembourg, Europe), covering a wide range of geological settings, catchment areas, contrasted landuse, and hydro-meteorological and tracer series. We define catchment storage as the total amount of water stored in a control volume, delimited by the catchment's topographical boundaries and depth of saturated and unsaturated zones. Complementary storage assessments (via input-output dynamics of natural tracers, geographical sounding, groundwater level measurements, soil moisture measurements, hydrometry) are carried out for comparison purposes. In our nested catchment set-up we have (1) assessed dependencies between geology, catchment permeability and winter runoff coefficients, (2) calculated water balance derived catchment storage and mixing potential and quantified how dynamic storage differs between catchments and scales, and (3) examined how stream baseflow dD (as a proxy for baseflow transit time) and integrated flow measures (like the flow duration curve) relate to bedrock geology. Catchments with higher bedrock permeability exhibited larger storage capacities and eventually lower average winter runoff coefficients. Over a time-span of 11 years, all catchments re-produced the same winter runoff coefficients year after year, regardless of their bedrock geology, permeability and winter season storage filling ratios. Ultimately, catchment organisation in our area of interest (i.e. geology, permeability, flowpath length) appeared to have a strong control on winter runoff coefficients, catchment storage and subsequently baseflow dD.

Design and implementation of a reconfigurable mixed-signal SoC based on field programmable analog arrays

NASA Astrophysics Data System (ADS)

Liu, Lintao; Gao, Yuhan; Deng, Jun

2017-11-01

This work presents a reconfigurable mixed-signal system-on-chip (SoC), which integrates switched-capacitor-based field programmable analog arrays (FPAA), analog-to-digital converter (ADC), digital-to-analog converter, digital down converter , digital up converter, 32-bit reduced instruction-set computer central processing unit (CPU) and other digital IPs on a single chip with 0.18 μm CMOS technology. The FPAA intellectual property could be reconfigured as different function circuits, such as gain amplifier, divider, sine generator, and so on. This single-chip integrated mixed-signal system is a complete modern signal processing system, occupying a die area of 7 × 8 mm 2 and consuming 719 mW with a clock frequency of 150 MHz for CPU and 200 MHz for ADC/DAC. This SoC chip can help customers to shorten design cycles, save board area, reduce the system power consumption and depress the system integration risk, which would afford a big prospect of application for wireless communication. Project supported by the National High Technology and Development Program of China (No. 2012AA012303).

Application of monotone integrated large eddy simulation to Rayleigh-Taylor mixing.

PubMed

Youngs, David L

2009-07-28

Rayleigh-Taylor (RT) instability occurs when a dense fluid rests on top of a light fluid in a gravitational field. It also occurs in an equivalent situation (in the absence of gravity) when an interface between fluids of different density is accelerated by a pressure gradient, e.g. in inertial confinement fusion implosions. Engineering models (Reynolds-averaged Navier-Stokes models) are needed to represent the effect of mixing in complex applications. However, large eddy simulation (LES) currently makes an essential contribution to understanding the mixing process and calibration or validation of the engineering models. In this paper, three cases are used to illustrate the current role of LES: (i) mixing at a plane boundary, (ii) break-up of a layer of dense fluid due to RT instability, and (iii) mixing in a simple spherical implosion. A monotone integrated LES approach is preferred because of the need to treat discontinuities in the flow, i.e. the initial density discontinuities or shock waves. Of particular interest is the influence of initial conditions and how this needs to be allowed for in engineering modelling. It is argued that loss of memory of the initial conditions is unlikely to occur in practical applications.

Adding to the mix: integrating ELSI into a National Nanoscale Science and Technology Center.

PubMed

Bjornstad, David J; Wolfe, Amy K

2011-12-01

This paper describes issues associated with integrating the study of Ethical, Legal and Social Issues (ELSI) into ongoing scientific and technical research and describes an approach adopted by the authors for their own work with the center for nanophase materials sciences (CNMS) at the Oak Ridge national laboratory (ORNL). Four key questions are considered: (a) What is ELSI and how should it identify and address topics of interest for the CNMS? (b) What advantages accrue to incorporating ELSI into the CNMS? (c) How should the integration of ELSI into the CNMS take place? (d) How should one judge the effectiveness of the activity? We conclude that ELSI research is not a monolithic body of knowledge, but should be adapted to the question at hand. Our approach focuses on junctures in the R&D continuum at which key decisions occur, avoids topics of a purely ethical nature or advocacy, and seeks to gather data in ways that permit testing the validity of generalization. Integrating ELSI into the CNMS allows dealing with topics firmly grounded in science, offers concrete examples of potential downstream applications and provides access to the scientists using the CNMS and their insights and observations. As well, integration provides the opportunity for R&D managers to benefit from ELSI insights and the potential to modify R&D agendas. Successful integration is dependent on the particular ELSI question set that drives the project. In this case questions sought to identify key choices, information of value to scientists, institutional attributes, key attributes of the CNMS culture, and alternatives for communicating results. The opportunity to consult with scientists on ELSI implications is offered, but not promoted. Finally, ELSI effectiveness is judged by observing the use to which research products are put within the CNMS, ORNL, and the community of external scholars.

Seabird aggregative patterns: a new tool for offshore wind energy risk assessment.

PubMed

Christel, Isadora; Certain, Grégoire; Cama, Albert; Vieites, David R; Ferrer, Xavier

2013-01-15

The emerging development of offshore wind energy has raised public concern over its impact on seabird communities. There is a need for an adequate methodology to determine its potential impacts on seabirds. Environmental Impact Assessments (EIAs) are mostly relying on a succession of plain density maps without integrated interpretation of seabird spatio-temporal variability. Using Taylor's power law coupled with mixed effect models, the spatio-temporal variability of species' distributions can be synthesized in a measure of the aggregation levels of individuals over time and space. Applying the method to a seabird aerial survey in the Ebro Delta, NW Mediterranean Sea, we were able to make an explicit distinction between transitional and feeding areas to define and map the potential impacts of an offshore wind farm project. We use the Ebro Delta study case to discuss the advantages of potential impacts maps over density maps, as well as to illustrate how these potential impact maps can be applied to inform on concern levels, optimal EIA design and monitoring in the assessment of local offshore wind energy projects. Copyright © 2012 Elsevier Ltd. All rights reserved.

"The Woods Is a More Free Space for Children to Be Creative; Their Imagination Kind of Sparks out There": Exploring Young Children's Cognitive Play Opportunities in Natural, Manufactured and Mixed Outdoor Preschool Zones

ERIC Educational Resources Information Center

Zamani, Zahra

2016-01-01

Outdoor preschools are critical for children's play and development. Integrating observational and interview methods, this study examined four-to-five-year-old children's cognitive play experiences in an outdoor preschool with natural, mixed and manufactured zones. The observational results indicated that the natural and mixed zones offered a…

Variability in runoff fluxes of dissolved and particulate carbon and nitrogen from two watersheds of different tree species during intense storm events

NASA Astrophysics Data System (ADS)

Lee, Mi-Hee; Payeur-Poirier, Jean-Lionel; Park, Ji-Hyung; Matzner, Egbert

2016-09-01

Heavy storm events may increase the amount of organic matter in runoff from forested watersheds as well as the relation of dissolved to particulate organic matter. This study evaluated the effects of monsoon storm events on the runoff fluxes and on the composition of dissolved (< 0.45 µm) and particulate (0.7 µm to 1 mm) organic carbon and nitrogen (DOC, DON, POC, PON) in a mixed coniferous/deciduous (mixed watershed) and a deciduous forested watershed (deciduous watershed) in South Korea. During storm events, DOC concentrations in runoff increased with discharge, while DON concentrations remained almost constant. DOC, DON and NO3-N fluxes in runoff increased linearly with discharge pointing to changing flow paths from deeper to upper soil layers at high discharge, whereas nonlinear responses of POC and PON fluxes were observed likely due to the origin of particulate matter from the erosion of mineral soil along the stream benches. The integrated C and N fluxes in runoff over the 2-month study period were in the order of DOC > POC and NO3-N > DON > PON. The integrated DOC fluxes in runoff during the study period were much larger at the deciduous watershed (16 kg C ha-1) than at the mixed watershed (7 kg C ha-1), while the integrated NO3-N fluxes were higher at the mixed watershed (5.2 kg N ha-1) than at the deciduous watershed (2.9 kg N ha-1). The latter suggests a larger N uptake by deciduous trees. Integrated fluxes of POC and PON were similar at both watersheds. The composition of organic matter in soils and runoff indicates that the contribution of near-surface flow to runoff was larger at the deciduous than at the mixed watershed. Our results demonstrate different responses of particulate and dissolved C and N in runoff to storm events as a combined effect of tree species composition and watershed specific flow paths.

Evaluating the influences of mixing strategies on the Biochemical Methane Potential test.

PubMed

Wang, Bing; Björn, Annika; Strömberg, Sten; Nges, Ivo Achu; Nistor, Mihaela; Liu, Jing

2017-01-01

Mixing plays an important role in the Biochemical Methane Potential (BMP) test, but only limited efforts have been put into it. In this study, various mixing strategies were applied to evaluate the influences on the BMP test, i.e., no mixing, shaking in water bath, shake manually once per day (SKM), automated unidirectional and bidirectional mixing. The results show that the effects of mixing are prominent for the most viscous substrate investigated, as both the highest methane production and highest maximal daily methane production were obtained at the highest mixing intensity. However, the organic removal efficiencies were not affected, which might offer evidence that mixing helps the release of gases trapped in digester liquid. Moreover, mixing is required for improved methane production when the digester content is viscous, conversely, mixing is unnecessary or SKM might be sufficient for the BMP test if the digester content is quite dilute or the substrate is easily degraded. Copyright © 2016 Elsevier Ltd. All rights reserved.

Integrating nutrition and early child-development interventions among infants and preschoolers in rural India.

PubMed

Fernandez-Rao, Sylvia; Hurley, Kristen M; Nair, Krishnapillai Madhavan; Balakrishna, Nagalla; Radhakrishna, Kankipati V; Ravinder, Punjal; Tilton, Nicholas; Harding, Kimberly B; Reinhart, Greg A; Black, Maureen M

2014-01-01

This article describes the development, design, and implementation of an integrated randomized double-masked placebo-controlled trial (Project Grow Smart) that examines how home/preschool fortification with multiple micronutrient powder (MNP) combined with an early child-development intervention affects child development, growth, and micronutrient status among infants and preschoolers in rural India. The 1-year trial has an infant phase (enrollment age: 6-12 months) and a preschool phase (enrollment age: 36-48 months). Infants are individually randomized into one of four groups: placebo, placebo plus early learning, MNP alone, and MNP plus early learning (integrated intervention), conducted through home visits. The preschool phase is a cluster-randomized trial conducted in Anganwadi centers (AWCs), government-run preschools sponsored by the Integrated Child Development System of India. AWCs are randomized into MNP or placebo, with the MNP or placebo mixed into the children's food. The evaluation examines whether the effects of the MNP intervention vary by the quality of the early learning opportunities and communication within the AWCs. Study outcomes include child development, growth, and micronutrient status. Lessons learned during the development, design, and implementation of the integrated trial can be used to guide large-scale policy and programs designed to promote the developmental, educational, and economic potential of children in developing countries. © 2013 New York Academy of Sciences.

Searching for Rigour in the Reporting of Mixed Methods Population Health Research: A Methodological Review

ERIC Educational Resources Information Center

Brown, K. M.; Elliott, S. J.; Leatherdale, S. T.; Robertson-Wilson, J.

2015-01-01

The environments in which population health interventions occur shape both their implementation and outcomes. Hence, when evaluating these interventions, we must explore both intervention content and context. Mixed methods (integrating quantitative and qualitative methods) provide this opportunity. However, although criteria exist for establishing…

Expert Design Advisor

DTIC Science & Technology

1990-10-01

to economic, technological, spatial or logistic concerns, or involve training, man-machine interfaces, or integration into existing systems. Once the...probabilistic reasoning, mixed analysis- and simulation-oriented, mixed computation- and communication-oriented, nonpreemptive static priority...scheduling base, nonrandomized, preemptive static priority scheduling base, randomized, simulation-oriented, and static scheduling base. The selection of both

Do Different Training Conditions Facilitate Team Implementation? A Quasi-Experimental Mixed Methods Study

ERIC Educational Resources Information Center

Nielsen, Karina; Randall, Raymond; Christensen, Karl B.

2017-01-01

A mixed methods approach was applied to examine the effects of a naturally occurring teamwork intervention supported with training. The first objective was to integrate qualitative process evaluation and quantitative effect evaluation to examine "how" and "why" the training influence intervention outcomes. The intervention (N =…

24 CFR 891.125 - Site and neighborhood standards.

Code of Federal Regulations, 2012 CFR

2012-04-01

... to the racial mix of the locality's population. (ii) Units may be considered to be comparable... racial mix of the eligible population. (C) There are racially integrated neighborhoods in the locality... site is acceptable if the only reason the need cannot otherwise be feasibly met is that discrimination...

24 CFR 891.125 - Site and neighborhood standards.

Code of Federal Regulations, 2014 CFR

2014-04-01

... to the racial mix of the locality's population. (ii) Units may be considered to be comparable... racial mix of the eligible population. (C) There are racially integrated neighborhoods in the locality... site is acceptable if the only reason the need cannot otherwise be feasibly met is that discrimination...

24 CFR 891.125 - Site and neighborhood standards.

Code of Federal Regulations, 2013 CFR

2013-04-01

... to the racial mix of the locality's population. (ii) Units may be considered to be comparable... racial mix of the eligible population. (C) There are racially integrated neighborhoods in the locality... site is acceptable if the only reason the need cannot otherwise be feasibly met is that discrimination...

Osteolytic and mixed cancer metastasis modulates collagen and mineral parameters within rat vertebral bone matrix.

PubMed

Burke, Mikhail V; Atkins, Ayelet; Akens, Margarete; Willett, Thomas L; Whyne, Cari M

2016-12-01

Metastatic involvement in vertebral bone diminishes the mechanical integrity of the spine; however minimal data exist on the potential impact of metastases on the intrinsic material characteristics of the bone matrix. Thirty-four (34) female athymic rats were inoculated with HeLa (N = 17) or Ace-1 (N = 17) cancer cells lines producing osteolytic or mixed (osteolytic and osteoblastic) metastases, respectively. A maximum of 21 days was allowed between inoculation and rat sacrifice for vertebrae extraction. High performance liquid chromatography (HPLC) was utilized to determine modifications in collagen-I parameters such as proline hydroxylation and the formation of specific enzymatic and non-enzymatic (pentosidine) cross-links. Raman spectroscopy was used to determine relative changes in mineral crystallinity, mineral carbonation, mineral/collagen matrix ratio, collagen quality ratio, and proline hydroxylation. HPLC results showed significant increase in the formation of pentosidine and decrease in the formation of the enzymatic cross-link deoxy-pryridinoline within osteolytic bone compared to mixed bone. Raman results showed decreased crystallinity, increased carbonation, and collagen quality (aka 1660/1690 sub-band) ratio with osteolytic bone compared to mixed bone and healthy controls along with an observed increase in proline hydroxylation with metastatic involvement. The mineral/matrix ratio decreased in both osteolytic and mixed bone compared to healthy controls. Quantifying modifications within the intrinsic characteristics of bone tissue will provide a foundation to assess the impact of current therapies on the material behavior of bone tissue in the metastatic spine and highlight targets for the development of new therapeutics and approaches for treatment. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:2126-2136, 2016. © 2016 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.

Mixed Grazing Systems Benefit both Upland Biodiversity and Livestock Production

PubMed Central

Fraser, Mariecia D.; Moorby, Jon M.; Vale, James E.; Evans, Darren M.

2014-01-01

Background With world food demand expected to double by 2050, identifying farming systems that benefit both agricultural production and biodiversity is a fundamentally important challenge for the 21st century, but this has to be achieved in a sustainable way. Livestock grazing management directly influences both economic outputs and biodiversity on upland farms while contributing to potentially damaging greenhouse gas emissions, yet no study has attempted to address these impacts simultaneously. Methods Using a replicated, landscape-scale field experiment consisting of five management ‘systems’ we tested the effects of progressively altering elements within an upland farming system, viz i) incorporating cattle grazing into an upland sheep system, ii) integrating grazing of semi-natural rough grazing into a mixed grazing system based on improved pasture, iii) altering the stocking ratio within a mixed grazing system, and iv) replacing modern crossbred cattle with a traditional breed. We quantified the impacts on livestock productivity and numbers of birds and butterflies over four years. Results, Conclusion and Significance We found that management systems incorporating mixed grazing with cattle improve livestock productivity and reduce methane emissions relative to sheep only systems. Systems that also included semi-natural rough grazing consistently supported more species of birds and butterflies, and it was possible to incorporate bouts of summer grazing of these pastures by cattle to meet habitat management prescriptions without compromising cattle performance overall. We found no evidence that the system incorporating a cattle breed popular as a conservation grazer was any better for bird and butterfly species richness than those based on a mainstream breed, yet methane emissions from such a system were predicted to be higher. We have demonstrated that mixed upland grazing systems not only improve livestock production, but also benefit biodiversity, suggesting a ‘win-win’ solution for farmers and conservationists. PMID:24551216

Mixed grazing systems benefit both upland biodiversity and livestock production.

PubMed

Fraser, Mariecia D; Moorby, Jon M; Vale, James E; Evans, Darren M

2014-01-01

With world food demand expected to double by 2050, identifying farming systems that benefit both agricultural production and biodiversity is a fundamentally important challenge for the 21(st) century, but this has to be achieved in a sustainable way. Livestock grazing management directly influences both economic outputs and biodiversity on upland farms while contributing to potentially damaging greenhouse gas emissions, yet no study has attempted to address these impacts simultaneously. Using a replicated, landscape-scale field experiment consisting of five management 'systems' we tested the effects of progressively altering elements within an upland farming system, viz i) incorporating cattle grazing into an upland sheep system, ii) integrating grazing of semi-natural rough grazing into a mixed grazing system based on improved pasture, iii) altering the stocking ratio within a mixed grazing system, and iv) replacing modern crossbred cattle with a traditional breed. We quantified the impacts on livestock productivity and numbers of birds and butterflies over four years. We found that management systems incorporating mixed grazing with cattle improve livestock productivity and reduce methane emissions relative to sheep only systems. Systems that also included semi-natural rough grazing consistently supported more species of birds and butterflies, and it was possible to incorporate bouts of summer grazing of these pastures by cattle to meet habitat management prescriptions without compromising cattle performance overall. We found no evidence that the system incorporating a cattle breed popular as a conservation grazer was any better for bird and butterfly species richness than those based on a mainstream breed, yet methane emissions from such a system were predicted to be higher. We have demonstrated that mixed upland grazing systems not only improve livestock production, but also benefit biodiversity, suggesting a 'win-win' solution for farmers and conservationists.

Effects of geometric modulation and surface potential heterogeneity on electrokinetic flow and solute transport in a microchannel

NASA Astrophysics Data System (ADS)

Bera, Subrata; Bhattacharyya, S.

2017-12-01

A numerical investigation is performed on the electroosmotic flow (EOF) in a surface-modulated microchannel to induce enhanced solute mixing. The channel wall is modulated by placing surface-mounted obstacles of trigonometric shape along which the surface potential is considered to be different from the surface potential of the homogeneous part of the wall. The characteristics of the electrokinetic flow are governed by the Laplace equation for the distribution of external electric potential; the Poisson equation for the distribution of induced electric potential; the Nernst-Planck equations for the distribution of ions; and the Navier-Stokes equations for fluid flow simultaneously. These nonlinear coupled set of governing equations are solved numerically by a control volume method over the staggered system. The influence of the geometric modulation of the surface, surface potential heterogeneity and the bulk ionic concentration on the EOF is analyzed. Vortical flow develops near a surface modulation, and it becomes stronger when the surface potential of the modulated region is in opposite sign to the surface potential of the homogeneous part of the channel walls. Vortical flow also depends on the Debye length when the Debye length is in the order of the channel height. Pressure drop along the channel length is higher for a ribbed wall channel compared to the grooved wall case. The pressure drop decreases with the increase in the amplitude for a grooved channel, but increases for a ribbed channel. The mixing index is quantified through the standard deviation of the solute distribution. Our results show that mixing index is higher for the ribbed channel compared to the grooved channel with heterogeneous surface potential. The increase in potential heterogeneity in the modulated region also increases the mixing index in both grooved and ribbed channels. However, the mixing performance, which is the ratio of the mixing index to pressure drop, reduces with the rise in the surface potential heterogeneity.

Effects of geometric modulation and surface potential heterogeneity on electrokinetic flow and solute transport in a microchannel

NASA Astrophysics Data System (ADS)

Bera, Subrata; Bhattacharyya, S.

2018-04-01

A numerical investigation is performed on the electroosmotic flow (EOF) in a surface-modulated microchannel to induce enhanced solute mixing. The channel wall is modulated by placing surface-mounted obstacles of trigonometric shape along which the surface potential is considered to be different from the surface potential of the homogeneous part of the wall. The characteristics of the electrokinetic flow are governed by the Laplace equation for the distribution of external electric potential; the Poisson equation for the distribution of induced electric potential; the Nernst-Planck equations for the distribution of ions; and the Navier-Stokes equations for fluid flow simultaneously. These nonlinear coupled set of governing equations are solved numerically by a control volume method over the staggered system. The influence of the geometric modulation of the surface, surface potential heterogeneity and the bulk ionic concentration on the EOF is analyzed. Vortical flow develops near a surface modulation, and it becomes stronger when the surface potential of the modulated region is in opposite sign to the surface potential of the homogeneous part of the channel walls. Vortical flow also depends on the Debye length when the Debye length is in the order of the channel height. Pressure drop along the channel length is higher for a ribbed wall channel compared to the grooved wall case. The pressure drop decreases with the increase in the amplitude for a grooved channel, but increases for a ribbed channel. The mixing index is quantified through the standard deviation of the solute distribution. Our results show that mixing index is higher for the ribbed channel compared to the grooved channel with heterogeneous surface potential. The increase in potential heterogeneity in the modulated region also increases the mixing index in both grooved and ribbed channels. However, the mixing performance, which is the ratio of the mixing index to pressure drop, reduces with the rise in the surface potential heterogeneity.

Elastic interactions of a fatigue crack with a micro-defect by the mixed boundary integral equation method

NASA Technical Reports Server (NTRS)

Lua, Yuan J.; Liu, Wing K.; Belytschko, Ted

1993-01-01

In this paper, the mixed boundary integral equation method is developed to study the elastic interactions of a fatigue crack and a micro-defect such as a void, a rigid inclusion or a transformation inclusion. The method of pseudo-tractions is employed to study the effect of a transformation inclusion. An enriched element which incorporates the mixed-mode stress intensity factors is applied to characterize the singularity at a moving crack tip. In order to evaluate the accuracy of the numerical procedure, the analysis of a crack emanating from a circular hole in a finite plate is performed and the results are compared with the available numerical solution. The effects of various micro-defects on the crack path and fatigue life are investigated. The results agree with the experimental observations.

Understanding the Experience of Stroke: A Mixed-Method Research Agenda

PubMed Central

Clarke, Philippa

2009-01-01

The use of both quantitative and qualitative strategies to examine a single research question has been a subject of considerable controversy and still remains a largely uncommon practice in the sociology of health and illness. Yet, when seeking to understand the meaning of a chronic disabling condition in later life from a social psychological perspective, a mixed-method approach is likely to provide the most comprehensive picture. This article provides an overview of the usefulness and appropriateness of a mixed-method approach to understanding the stroke experience. I comment on the current state of research on the experience of stroke, including epistemological and ontological orientations. Using real data examples, I address paradigmatic assumptions, methods of integration, as well as challenges and pitfalls in integrating methods. I conclude by considering future directions in this field of research. PMID:19386828

Verification of E-Beam direct write integration into 28nm BEOL SRAM technology

NASA Astrophysics Data System (ADS)

Hohle, Christoph; Choi, Kang-Hoon; Gutsch, Manuela; Hanisch, Norbert; Seidel, Robert; Steidel, Katja; Thrun, Xaver; Werner, Thomas

2015-03-01

Electron beam direct write lithography (EBDW) potentially offers advantages for low-volume semiconductor manufacturing, rapid prototyping or design verification due to its high flexibility without the need of costly masks. However, the integration of this advanced patterning technology into complex CMOS manufacturing processes remains challenging. The low throughput of today's single e-Beam tools limits high volume manufacturing applications and maturity of parallel (multi) beam systems is still insufficient [1,2]. Additional concerns like transistor or material damage of underlying layers during exposure at high electron density or acceleration voltage have to be addressed for advanced technology nodes. In the past we successfully proved that potential degradation effects of high-k materials or ULK shrink can be neglected and were excluded by demonstrating integrated electrical results of 28nm node transistor and BEOL performance following 50kV electron beam dry exposure [3]. Here we will give an update on the integration of EBDW in the 300mm CMOS manufacturing processes of advanced integrated circuits at the 28nm SRAM node of GLOBALFOUNDRIES Dresden. The work is an update to what has been previously published [4]. E-beam patterning results of BEOL full chip metal and via layers with a dual damascene integration scheme using a 50kV VISTEC SB3050DW variable shaped electron beam direct writer at Fraunhofer IPMSCNT are demonstrated. For the patterning of the Metal layer a Mix & Match concept based on the sequence litho - etch -litho -etch (LELE) was developed and evaluated wherein several exposure fields were blanked out during the optical exposure. Etch results are shown and compared to the POR. Results are also shown on overlay performance and optimized e-Beam exposure time using most advanced data prep solutions and resist processes. The patterning results have been verified using fully integrated electrical measurement of metal lines and vias on wafer level. In summary we demonstrate the integration capability of EBDW into a productive CMOS process flow at the example of the 28nm SRAM technology node.

Text-in-Context: A Method for Extracting Findings in Mixed-Methods Mixed Research Synthesis Studies

PubMed Central

Leeman, Jennifer; Knafl, Kathleen; Crandell, Jamie L.

2012-01-01

Aim Our purpose in this paper is to propose a new method for extracting findings from research reports included in mixed-methods mixed research synthesis studies. Background International initiatives in the domains of systematic review and evidence synthesis have been focused on broadening the conceptualization of evidence, increased methodological inclusiveness and the production of evidence syntheses that will be accessible to and usable by a wider range of consumers. Initiatives in the general mixed-methods research field have been focused on developing truly integrative approaches to data analysis and interpretation. Data source The data extraction challenges described here were encountered and the method proposed for addressing these challenges was developed, in the first year of the ongoing (2011–2016) study: Mixed-Methods Synthesis of Research on Childhood Chronic Conditions and Family. Discussion To preserve the text-in-context of findings in research reports, we describe a method whereby findings are transformed into portable statements that anchor results to relevant information about sample, source of information, time, comparative reference point, magnitude and significance and study-specific conceptions of phenomena. Implications for nursing The data extraction method featured here was developed specifically to accommodate mixed-methods mixed research synthesis studies conducted in nursing and other health sciences, but reviewers might find it useful in other kinds of research synthesis studies. Conclusion This data extraction method itself constitutes a type of integration to preserve the methodological context of findings when statements are read individually and in comparison to each other. PMID:22924808

Mapping the Mixed Methods–Mixed Research Synthesis Terrain

PubMed Central

Sandelowski, Margarete; Voils, Corrine I.; Leeman, Jennifer; Crandell, Jamie L.

2012-01-01

Mixed methods–mixed research synthesis is a form of systematic review in which the findings of qualitative and quantitative studies are integrated via qualitative and/or quantitative methods. Although methodological advances have been made, efforts to differentiate research synthesis methods have been too focused on methods and not focused enough on the defining logics of research synthesis—each of which may be operationalized in different ways—or on the research findings themselves that are targeted for synthesis. The conduct of mixed methods–mixed research synthesis studies may more usefully be understood in terms of the logics of aggregation and configuration. Neither logic is preferable to the other nor tied exclusively to any one method or to any one side of the qualitative/quantitative binary. PMID:23066379

Modeling Framework and Validation of a Smart Grid and Demand Response System for Wind Power Integration

DOE Office of Scientific and Technical Information (OSTI.GOV)

Broeer, Torsten; Fuller, Jason C.; Tuffner, Francis K.

2014-01-31

Electricity generation from wind power and other renewable energy sources is increasing, and their variability introduces new challenges to the power system. The emergence of smart grid technologies in recent years has seen a paradigm shift in redefining the electrical system of the future, in which controlled response of the demand side is used to balance fluctuations and intermittencies from the generation side. This paper presents a modeling framework for an integrated electricity system where loads become an additional resource. The agent-based model represents a smart grid power system integrating generators, transmission, distribution, loads and market. The model incorporates generatormore » and load controllers, allowing suppliers and demanders to bid into a Real-Time Pricing (RTP) electricity market. The modeling framework is applied to represent a physical demonstration project conducted on the Olympic Peninsula, Washington, USA, and validation simulations are performed using actual dynamic data. Wind power is then introduced into the power generation mix illustrating the potential of demand response to mitigate the impact of wind power variability, primarily through thermostatically controlled loads. The results also indicate that effective implementation of Demand Response (DR) to assist integration of variable renewable energy resources requires a diversity of loads to ensure functionality of the overall system.« less

Fostering interprofessional collaboration through a family-centred programme for grandparent-headed families.

PubMed

Lee, Youjung; Quranta, Judith; Anderson, Elizabeth

2017-07-01

Interprofessional education (IPE) is now widely considered an essential part of preparing professionals to work more effectively with marginalised families, such as grandparent-headed families. This study aims to explore the potential for IPE through a family-centred programme for grandparent-headed families during professional preparation for education, social work, and nursing students to foster collaboration. Using mixed methods with concurrent data collection and analyses, this study suggests that participation in IPE can positively impact perceptions of interprofessional collaboration to better meet the multifaceted needs of grandparent-headed families by increasing awareness and self-efficacy for interprofessional collaboration in schools and deepening understandings of non-traditional families. Implications highlight possibilities for more flexible and integrated professional identities in working with children and their families as well as the potential for future school professionals to embrace more comprehensive services in schools.

What psychological process is reflected in the FN400 event-related potential component?

PubMed

Leynes, P Andrew; Bruett, Heather; Krizan, Jenna; Veloso, Ana

2017-04-01

During many recognition contexts, old items elicit a more positive event-related potentials (ERPs) than new items at mid-frontal electrodes about 300-500ms. The psychological processes that are reflected in is ERP component (i.e., the FN400) has been vigorously debated. Some argue that the FN400 reflects familiarity, whereas others argue that it reflects conceptual implicit memory. Three experiments contrasted these two hypotheses by presenting pre-experimentally familiar (i.e., name-brand) products and novel, off-brand products. In addition, some of the off-brand products were conceptually primed by the name-brand product to determine how FN400 amplitude would be affected by conceptually primed, but novel, products. The results provided mixed support for both theoretical views, and it is integrated with a broader theoretical framework to characterize the psychological processes captured by the FN400. Copyright © 2017 Elsevier Inc. All rights reserved.

Moving out of Conflict: The Contribution of Integrated Schools in Northern Ireland to Identity, Attitudes, Forgiveness and Reconciliation

ERIC Educational Resources Information Center

McGlynn, Claire; Niens, Ulrike; Cairns, Ed; Hewstone, Miles

2004-01-01

As the integrated education movement in Northern Ireland passes its twenty-first anniversary, it is pertinent to explore the legacy of mixed Catholic and Protestant schooling. This paper summarises the findings of different studies regarding the impact of integrated education in Northern Ireland on social identity, intergroup attitudes and…

Microgrid to enable optimal distributed energy retail and end-user demand response

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jin, Ming; Feng, Wei; Marnay, Chris

In the face of unprecedented challenges in environmental sustainability and grid resilience, there is an increasingly held consensus regarding the adoption of distributed and renewable energy resources such as microgrids (MGs), and the utilization of flexible electric loads by demand response (DR) to potentially drive a necessary paradigm shift in energy production and consumption patterns. However, the potential value of distributed generation and demand flexibility has not yet been fully realized in the operation of MGs. This study investigates the pricing and operation strategy with DR for a MG retailer in an integrated energy system (IES). Based on co-optimizing retailmore » rates and MG dispatch formulated as a mixed integer quadratic programming (MIQP) problem, our model devises a dynamic pricing scheme that reflects the cost of generation and promotes DR, in tandem with an optimal dispatch plan that exploits spark spread and facilitates the integration of renewables, resulting in improved retailer profits and system stability. Main issues like integrated energy coupling and customer bill reduction are addressed during pricing to ensure rates competitiveness and customer protection. By evaluating on real datasets, the system is demonstrated to optimally coordinate storage, renewables, and combined heat and power (CHP), reduce carbon dioxide emission while maintaining profits, and effectively alleviate the PV curtailment problem. Finally, the model can be used by retailers and MG operators to optimize their operations, as well as regulators to design new utility rates in support of the ongoing transformation of energy systems.« less

Microgrid to enable optimal distributed energy retail and end-user demand response

DOE PAGES

Jin, Ming; Feng, Wei; Marnay, Chris; ...

2018-06-07

In the face of unprecedented challenges in environmental sustainability and grid resilience, there is an increasingly held consensus regarding the adoption of distributed and renewable energy resources such as microgrids (MGs), and the utilization of flexible electric loads by demand response (DR) to potentially drive a necessary paradigm shift in energy production and consumption patterns. However, the potential value of distributed generation and demand flexibility has not yet been fully realized in the operation of MGs. This study investigates the pricing and operation strategy with DR for a MG retailer in an integrated energy system (IES). Based on co-optimizing retailmore » rates and MG dispatch formulated as a mixed integer quadratic programming (MIQP) problem, our model devises a dynamic pricing scheme that reflects the cost of generation and promotes DR, in tandem with an optimal dispatch plan that exploits spark spread and facilitates the integration of renewables, resulting in improved retailer profits and system stability. Main issues like integrated energy coupling and customer bill reduction are addressed during pricing to ensure rates competitiveness and customer protection. By evaluating on real datasets, the system is demonstrated to optimally coordinate storage, renewables, and combined heat and power (CHP), reduce carbon dioxide emission while maintaining profits, and effectively alleviate the PV curtailment problem. Finally, the model can be used by retailers and MG operators to optimize their operations, as well as regulators to design new utility rates in support of the ongoing transformation of energy systems.« less

Conflicting Cultural Values, Gender Role Attitudes, and Acculturation: Exploring the Context of Reproductive and Mental Health of Asian-Indian Immigrant Women in the US.

PubMed

Mann, Semran K; Roberts, Lisa R; Montgomery, Susanne

2017-04-01

Asian-Indians, one of the fastest growing US immigrant groups, experience depression and anxiety, particularly among women. In this mixed-methods study, quantitative (n = 217) and qualitative (n = 36) data explored egalitarian vs. traditional views regarding women's roles and rights. Bicultural integration, family planning decision-making ability, and anxiety were associated with more egalitarian views, while Punjabi language preference, depression, and more births were associated with traditional views. Health care professionals serving this population need to be aware of the potential cultural values conflicts and gender role expectations that influence decisions around reproductive health and mental health care for Asian-Indian immigrant women.

Broadband wavelength conversion in hydrogenated amorphous silicon waveguide with silicon nitride layer

NASA Astrophysics Data System (ADS)

Wang, Jiang; Li, Yongfang; Wang, Zhaolu; Han, Jing; Huang, Nan; Liu, Hongjun

2018-01-01

Broadband wavelength conversion based on degenerate four-wave mixing is theoretically investigated in a hydrogenated amorphous silicon (a-Si:H) waveguide with silicon nitride inter-cladding layer (a-Si:HN). We have found that enhancement of the non-linear effect of a-Si:H waveguide nitride intermediate layer facilitates broadband wavelength conversion. Conversion bandwidth of 490 nm and conversion efficiency of 11.4 dB were achieved in a numerical simulation of a 4 mm-long a-Si:HN waveguide under 1.55 μm continuous wave pumping. This broadband continuous-wave wavelength converter has potential applications in photonic networks, a type of readily manufactured low-cost highly integrated optical circuits.

Analysis of the Δ(X) - L intervalley mixing in group-IV heterostructures

NASA Astrophysics Data System (ADS)

Kiselev, A. A.; Kim, K. W.; Yablonovitch, E.

2005-06-01

We provide a treatment of the problem of Δ(X) - L intervalley mixing in differently oriented SiGe heterostructures in the transparent effective mass method. Mixing potentials can be calculated, considering changes in the constituent Concentrations of individual heterolayers from some "virtual crystal level" as a bunch of microscopic single-ion perturbations. Strong mixing between lowest localized Δ and L states can be achieved in (113) structures, making them favorable for the electrically controlled gigantic intervalley g factor modulation. We provide estimates for the mixing potential and further consider limitations related to the strength of the in-plane localization and quality of the interface.

Organic synthesis during fluid mixing in hydrothermal systems

NASA Astrophysics Data System (ADS)

Shock, Everett L.; Schulte, Mitchell D.

1998-12-01

Hydrothermal circulation can lead to fluid mixing on any planet with liquid water and a source of heat. Aqueous fluids with differing compositions, especially different oxidation states, are likely to be far from thermodynamic equilibrium when they mix, and provide a source of free energy that can drive organic synthesis from CO2 and H2, and/or supply a source of geochemical energy to chemolithoautotrophic organisms. Results are presented that quantify the potential for organic synthesis during unbuffered fluid mixing in present submarine hydrothermal systems, as well as hypothetical systems that may have existed on the early Earth and Mars. Dissolved hydrogen, present in submarine hydrothermal fluids owing to the high-temperature reduction of H2O as seawater reacts with oceanic crustal rocks, provides the reduction potential and the thermodynamic drive for organic synthesis from CO2 (or bicarbonate) as hydrothermal fluids mix with seawater. The potential for organic synthesis is a strong function of the H2 content of the hydrothermal fluid, which is, in turn, a function of the prevailing oxidation state controlled by the composition of the rock that hosts the hydrothermal system. Hydrothermal fluids with initial oxidation states at or below those set by the fayalite-magnetite-quartz mineral assemblage show the greatest potential for driving organic synthesis. These calculations show that it is thermodynamically possible for 100% of the carbon in the mixed fluid to be reduced to a mixture of carboxylic acids, alcohols, and ketones in the range 250-50°C as cold seawater mixes with the hydrothermal fluid. As the temperature drops, larger organic molecules are favored, which implies that fluid mixing could drive the geochemical equivalent of a metabolic system. This enormous reduction potential probably drives a large portion of the primary productivity around present seafloor hydrothermal vents and would have been present in hydrothermal systems on the early Earth or Mars. The single largest control on the potential for organic synthesis is the composition of the rock that hosts the hydrothermal system.

Tradeoff between mixing and transport for electroosmotic flow in heterogeneous microchannels with nonuniform surface potentials.

PubMed

Tian, Fuzhi; Li, Baoming; Kwok, Daniel Y

2005-02-01

Electroosmotic flow (EOF) is a phenomenon associated with the movement of an aqueous solution induced by the application of an electric field in microchannels. The characteristics of EOF depend on the nature of the surface potential, i.e., whether it is uniform or nonuniform. In this paper, a lattice Boltzmann model (LBM) combined with the Poisson-Boltzmann equation is used to simulate flow field in a rectangular microchannel with nonuniform (step change) surface potentials. The simulation results indicate that local circulations can occur near a heterogeneous region with nonuniform surface potentials, in agreement with those by other authors. Largest circulations, which imply a highest mixing efficiency due to convection and short-range diffusion, were found when the average surface potential is zero, regardless of whether the distribution of the heterogeneous patches is symmetric or asymmetric. In this work, we have illustrated that there is a trade-off between the mixing and liquid transport in EOF microfluidics. One should not simply focus on mixing and neglect liquid transport, as performed in the literature. Excellent mixing could lead to a poor transport of electroosmotic flow in microchannels.

Selective filling for patterning in microfluidic channels and integration of chromatography in "lab-on-a-chip" devices using sol-gel technology

NASA Astrophysics Data System (ADS)

Jindal, Rohit

The last decade has seen tremendous advancement in the development of miniaturized chemical analysis system also known as "lab-on-a-chip". It is believed that the true potential of these devices will be achieved by integrating various functions such as separation, reaction, sensing, mixing, pumping, injection and detection onto a single chip. The ability to pattern different functionalities is indispensable for the development of highly integrated devices. In this work, a simple method based on the concept of selective filling is described for patterning in the microfluidic channels. It is based on the difference in the free energy of filling between an open and a covered part of the channel. This method was used for the integration of chromatography in the microfluidic devices. A chromatographic column was realized by utilizing sol-gel as an immobilization matrix for entrapping reversed phase chromatographic particles. Localization of the stationary phase was achieved using the selective filling technique. Channels were fabricated in quartz using photolithography and wet etching. Electroosmotic flow was used for manipulating fluid movement in the channels. Cross channel design was used for making a pulse injection of the solutes in the separation channel. An optical fiber setup was developed for carrying out on-chip UV absorbance detection. Stationary phase was created under different sol-gel synthesis conditions. It was established that the sol-gel synthesis carried out under acidic conditions provides the optimum synthesis conditions for creating separation column. Chromatographic performance of the stationary phase material was demonstrated by separating peptides present in a mixture. The sol-gel immobilization method was extended for the integration of micropump in the chip. The micropump enables pumping of the fluid in field free channels. Preliminary results, demonstrating the potential of carbon nanotubes as a support material in the microfluidic channels, were obtained using CVD (chemical vapor deposition) grown tubes in the channel. Results obtained in this work demonstrate the potential of selective filling technique along with sol-gel technology as a useful tool for the fabrication of multifunctional "lab-on-a-chip" devices.

Mixed-Methods Research in the Discipline of Nursing.

PubMed

Beck, Cheryl Tatano; Harrison, Lisa

2016-01-01

In this review article, we examined the prevalence and characteristics of 294 mixed-methods studies in the discipline of nursing. Creswell and Plano Clark's typology was most frequently used along with concurrent timing. Bivariate statistics was most often the highest level of statistics reported in the results. As for qualitative data analysis, content analysis was most frequently used. The majority of nurse researchers did not specifically address the purpose, paradigm, typology, priority, timing, interaction, or integration of their mixed-methods studies. Strategies are suggested for improving the design, conduct, and reporting of mixed-methods studies in the discipline of nursing.

Monolithic Gyroidal Mesoporous Mixed Titanium–Niobium Nitrides

PubMed Central

2015-01-01

Mesoporous transition metal nitrides are interesting materials for energy conversion and storage applications due to their conductivity and durability. We present ordered mixed titanium–niobium (8:2, 1:1) nitrides with gyroidal network structures synthesized from triblock terpolymer structure-directed mixed oxides. The materials retain both macroscopic integrity and mesoscale ordering despite heat treatment up to 600 °C, without a rigid carbon framework as a support. Furthermore, the gyroidal lattice parameters were varied by changing polymer molar mass. This synthesis strategy may prove useful in generating a variety of monolithic ordered mesoporous mixed oxides and nitrides for electrode and catalyst materials. PMID:25122534

Approaches to Mixed Methods Dissemination and Implementation Research: Methods, Strengths, Caveats, and Opportunities.

PubMed

Green, Carla A; Duan, Naihua; Gibbons, Robert D; Hoagwood, Kimberly E; Palinkas, Lawrence A; Wisdom, Jennifer P

2015-09-01

Limited translation of research into practice has prompted study of diffusion and implementation, and development of effective methods of encouraging adoption, dissemination and implementation. Mixed methods techniques offer approaches for assessing and addressing processes affecting implementation of evidence-based interventions. We describe common mixed methods approaches used in dissemination and implementation research, discuss strengths and limitations of mixed methods approaches to data collection, and suggest promising methods not yet widely used in implementation research. We review qualitative, quantitative, and hybrid approaches to mixed methods dissemination and implementation studies, and describe methods for integrating multiple methods to increase depth of understanding while improving reliability and validity of findings.

Development of a Mixed Methods Investigation of Process and Outcomes of Community-Based Participatory Research.

PubMed

Lucero, Julie; Wallerstein, Nina; Duran, Bonnie; Alegria, Margarita; Greene-Moton, Ella; Israel, Barbara; Kastelic, Sarah; Magarati, Maya; Oetzel, John; Pearson, Cynthia; Schulz, Amy; Villegas, Malia; White Hat, Emily R

2018-01-01

This article describes a mixed methods study of community-based participatory research (CBPR) partnership practices and the links between these practices and changes in health status and disparities outcomes. Directed by a CBPR conceptual model and grounded in indigenous-transformative theory, our nation-wide, cross-site study showcases the value of a mixed methods approach for better understanding the complexity of CBPR partnerships across diverse community and research contexts. The article then provides examples of how an iterative, integrated approach to our mixed methods analysis yielded enriched understandings of two key constructs of the model: trust and governance. Implications and lessons learned while using mixed methods to study CBPR are provided.

Approaches to Mixed Methods Dissemination and Implementation Research: Methods, Strengths, Caveats, and Opportunities

PubMed Central

Green, Carla A.; Duan, Naihua; Gibbons, Robert D.; Hoagwood, Kimberly E.; Palinkas, Lawrence A.; Wisdom, Jennifer P.

2015-01-01

Limited translation of research into practice has prompted study of diffusion and implementation, and development of effective methods of encouraging adoption, dissemination and implementation. Mixed methods techniques offer approaches for assessing and addressing processes affecting implementation of evidence-based interventions. We describe common mixed methods approaches used in dissemination and implementation research, discuss strengths and limitations of mixed methods approaches to data collection, and suggest promising methods not yet widely used in implementation research. We review qualitative, quantitative, and hybrid approaches to mixed methods dissemination and implementation studies, and describe methods for integrating multiple methods to increase depth of understanding while improving reliability and validity of findings. PMID:24722814

Light-Gated Memristor with Integrated Logic and Memory Functions.

PubMed

Tan, Hongwei; Liu, Gang; Yang, Huali; Yi, Xiaohui; Pan, Liang; Shang, Jie; Long, Shibing; Liu, Ming; Wu, Yihong; Li, Run-Wei

2017-11-28

Memristive devices are able to store and process information, which offers several key advantages over the transistor-based architectures. However, most of the two-terminal memristive devices have fixed functions once made and cannot be reconfigured for other situations. Here, we propose and demonstrate a memristive device "memlogic" (memory logic) as a nonvolatile switch of logic operations integrated with memory function in a single light-gated memristor. Based on nonvolatile light-modulated memristive switching behavior, a single memlogic cell is able to achieve optical and electrical mixed basic Boolean logic of reconfigurable "AND", "OR", and "NOT" operations. Furthermore, the single memlogic cell is also capable of functioning as an optical adder and digital-to-analog converter. All the memlogic outputs are memristive for in situ data storage due to the nonvolatile resistive switching and persistent photoconductivity effects. Thus, as a memdevice, the memlogic has potential for not only simplifying the programmable logic circuits but also building memristive multifunctional optoelectronics.

Augmented paper maps: Exploring the design space of a mixed reality system

NASA Astrophysics Data System (ADS)

Paelke, Volker; Sester, Monika

Paper maps and mobile electronic devices have complementary strengths and shortcomings in outdoor use. In many scenarios, like small craft sailing or cross-country trekking, a complete replacement of maps is neither useful nor desirable. Paper maps are fail-safe, relatively cheap, offer superior resolution and provide large scale overview. In uses like open-water sailing it is therefore mandatory to carry adequate maps/charts. GPS based mobile devices, on the other hand, offer useful features like automatic positioning and plotting, real-time information update and dynamic adaptation to user requirements. While paper maps are now commonly used in combination with mobile GPS devices, there is no meaningful integration between the two, and the combined use leads to a number of interaction problems and potential safety issues. In this paper we explore the design space of augmented paper maps in which maps are augmented with additional functionality through a mobile device to achieve a meaningful integration between device and map that combines their respective strengths.

Label-free isolation of a prostate cancer cell among blood cells and the single-cell measurement of drug accumulation using an integrated microfluidic chip.

PubMed

Khamenehfar, A; Beischlag, T V; Russell, P J; Ling, M T P; Nelson, C; Li, P C H

2015-11-01

Circulating tumor cells (CTCs) are found in the blood of patients with cancer. Although these cells are rare, they can provide useful information for chemotherapy. However, isolation of these rare cells from blood is technically challenging because they are small in numbers. An integrated microfluidic chip, dubbed CTC chip, was designed and fabricated for conducting tumor cell isolation. As CTCs usually show multidrug resistance (MDR), the effect of MDR inhibitors on chemotherapeutic drug accumulation in the isolated single tumor cell is measured. As a model of CTC isolation, human prostate cancer cells were mixed with mouse blood cells and the label-free isolation of the tumor cells was conducted based on cell size difference. The major advantages of the CTC chip are the ability for fast cell isolation, followed by multiple rounds of single-cell measurements, suggesting a potential assay for detecting the drug responses based on the liquid biopsy of cancer patients.

Super non-linear RRAM with ultra-low power for 3D vertical nano-crossbar arrays.

PubMed

Luo, Qing; Xu, Xiaoxin; Liu, Hongtao; Lv, Hangbing; Gong, Tiancheng; Long, Shibing; Liu, Qi; Sun, Haitao; Banerjee, Writam; Li, Ling; Gao, Jianfeng; Lu, Nianduan; Liu, Ming

2016-08-25

Vertical crossbar arrays provide a cost-effective approach for high density three-dimensional (3D) integration of resistive random access memory. However, an individual selector device is not allowed to be integrated with the memory cell separately. The development of V-RRAM has impeded the lack of satisfactory self-selective cells. In this study, we have developed a high performance bilayer self-selective device using HfO2 as the memory switching layer and a mixed ionic and electron conductor as the selective layer. The device exhibits high non-linearity (>10(3)) and ultra-low half-select leakage (<0.1 pA). A four layer vertical crossbar array was successfully demonstrated based on the developed self-selective device. High uniformity, ultra-low leakage, sub-nA operation, self-compliance, and excellent read/write disturbance immunity were achieved. The robust array level performance shows attractive potential for low power and high density 3D data storage applications.

Implementation of equivalent domain integral method in the two-dimensional analysis of mixed mode problems

NASA Technical Reports Server (NTRS)

Raju, I. S.; Shivakumar, K. N.

1989-01-01

An equivalent domain integral (EDI) method for calculating J-intergrals for two-dimensional cracked elastic bodies is presented. The details of the method and its implementation are presented for isoparametric elements. The total and product integrals consist of the sum of an area of domain integral and line integrals on the crack faces. The line integrals vanish only when the crack faces are traction free and the loading is either pure mode 1 or pure mode 2 or a combination of both with only the square-root singular term in the stress field. The EDI method gave accurate values of the J-integrals for two mode I and two mixed mode problems. Numerical studies showed that domains consisting of one layer of elements are sufficient to obtain accurate J-integral values. Two procedures for separating the individual modes from the domain integrals are presented. The procedure that uses the symmetric and antisymmetric components of the stress and displacement fields to calculate the individual modes gave accurate values of the integrals for all problems analyzed. The EDI method when applied to a problem of an interface crack in two different materials showed that the mode 1 and mode 2 components are domain dependent while the total integral is not. This behavior is caused by the presence of the oscillatory part of the singularity in bimaterial crack problems. The EDI method, thus, shows behavior similar to the virtual crack closure method for bimaterial problems.

Applying the Mixed Methods Instrument Development and Construct Validation Process: the Transformative Experience Questionnaire

ERIC Educational Resources Information Center

Koskey, Kristin L. K.; Sondergeld, Toni A.; Stewart, Victoria C.; Pugh, Kevin J.

2018-01-01

Onwuegbuzie and colleagues proposed the Instrument Development and Construct Validation (IDCV) process as a mixed methods framework for creating and validating measures. Examples applying IDCV are lacking. We provide an illustrative case integrating the Rasch model and cognitive interviews applied to the development of the Transformative…

Innovative Mixed-Methods Research: Moving beyond Design Technicalities to Epistemological and Methodological Realizations

ERIC Educational Resources Information Center

Riazi, A. Mehdi

2016-01-01

Mixed-methods research (MMR), as an inter-discourse (quantitative and qualitative) methodology, can provide applied linguistics researchers the opportunity to draw on and integrate the strengths of the two research methodological approaches in favour of making more rigorous inferences about research problems. In this article, the argument is made…

A mixed integer program to model spatial wildfire behavior and suppression placement decisions

Treesearch

Erin J. Belval; Yu Wei; Michael Bevers

2015-01-01

Wildfire suppression combines multiple objectives and dynamic fire behavior to form a complex problem for decision makers. This paper presents a mixed integer program designed to explore integrating spatial fire behavior and suppression placement decisions into a mathematical programming framework. Fire behavior and suppression placement decisions are modeled using...

Estimation of Complex Generalized Linear Mixed Models for Measurement and Growth

ERIC Educational Resources Information Center

Jeon, Minjeong

2012-01-01

Maximum likelihood (ML) estimation of generalized linear mixed models (GLMMs) is technically challenging because of the intractable likelihoods that involve high dimensional integrations over random effects. The problem is magnified when the random effects have a crossed design and thus the data cannot be reduced to small independent clusters. A…

Mixed Resilience: A Study of Multiethnic Mexican American Stress and Coping in Arizona

ERIC Educational Resources Information Center

Jackson, Kelly F.; Wolven, Thera; Aguilera, Kimberly

2013-01-01

Guided by an integrated framework of resilience, this in-depth qualitative study examined the major stressors persons of multiethnic Mexican American heritage encountered in their social environments related to their mixed identity and the resilience enhancing processes they employed to cope with these stressors. Life-story event narratives were…

Integrated least-cost lumber grade-mix solver

Treesearch

U. Buehlmann; R. Buck; R.E. Thomas

2011-01-01

Hardwood lumber costs account for up to 70 percent of the total product costs of U.S. secondary wood products producers. Reducing these costs is difficult and often requires substantial capital investments. However, lumber-purchasing costs can be minimized by buying the least-cost lumber grade-mix that satisfies a company's component needs. Price differentials...

The Use of Mixed Methods for Therapeutic Massage Research

PubMed Central

Porcino, Antony Joseph; Verhoef, Marja J.

2010-01-01

Mixed methods research is the integration of quantitative and qualitative components in a research project. Whether you are reading or designing a mixed methods research project, it is important to be familiar with both qualitative and quantitative research methods and the specific purposes for which they are brought together in a study: triangulation, complementarity, expansion, initiation, or development. In addition, decisions need to be made about the sequencing and the priority or importance of each qualitative and quantitative component relative to the other components, and the point or points at which the various qualitative and quantitative components will be integrated. Mixed methods research is increasingly being recognized for its ability to bring multiple points of view to a research project, taking advantage of the strengths of each of the quantitative and qualitative components to explain or resolve complex phenomena or results. This ability becomes critical when complex healing systems such as therapeutic massage are being studied. Complex healing systems may have multiple physiologic effects, often reflected in changes throughout the patient’s body. Additionally, the patient’s experience of the treatment may be an important outcome. PMID:21589698

Automated Planning and Scheduling for Space Mission Operations

NASA Technical Reports Server (NTRS)

Chien, Steve; Jonsson, Ari; Knight, Russell

2005-01-01

Research Trends: a) Finite-capacity scheduling under more complex constraints and increased problem dimensionality (subcontracting, overtime, lot splitting, inventory, etc.) b) Integrated planning and scheduling. c) Mixed-initiative frameworks. d) Management of uncertainty (proactive and reactive). e) Autonomous agent architectures and distributed production management. e) Integration of machine learning capabilities. f) Wider scope of applications: 1) analysis of supplier/buyer protocols & tradeoffs; 2) integration of strategic & tactical decision-making; and 3) enterprise integration.

Band Alignment-Driven Oxidative Injury to the Skin by Anatase/Rutile Mixed-Phase Titanium Dioxide Nanoparticles under Sunlight Exposure.

PubMed

Sun, Xiujuan; Chang, Yun; Cheng, Yan; Feng, Yanlin; Zhang, Haiyuan

2018-04-12

Anatase/rutile mixed-phase titanium dioxide (TiO2) nanoparticles (NPs) have been found in cosmetics and cotton textiles. Once exposed to sunlight, mixed-phase TiO2 NPs are even more toxic to cells than pure phase NPs, however, the underlying mechanism remains unclear. Considering the unique anatase/rutile heterojunction structure existing in mixed-phase NPs, the potent toxicity of mixed-phase TiO2 NPs probably originates from the high reactive oxygen species (ROS) production because the anatase/rutile heterojunction is constituted by the staggered energy bands that facilitate the electron-hole separation at the interface due to the band alignment. In the present study, a library of mixed-phase TiO2 NPs with different anatase/rutile ratios was established to investigate the potential property-activity relationship and further clarify the underlying molecular mechanism. Under sunlight exposure, these mixed-phase TiO2 NPs could produce significant abiotic ROS and induce hierarchical oxidative stress to HaCaT skin cells and mice skin. The ROS magnitude and toxicity potential of these NPs were found to be proportional to their energy band bending (BB) levels. This means that the toxicity of mixed-phase TiO2 NPs can be correlated to their heterojunction density, and the toxicity potential of mixed-phase TiO2 NPs can be weighed by their BB levels.

A Mixed-Methods Examination of Influences on the Shape and Malleability of Technological Pedagogical Content Knowledge (TPACK) in Graduate Teacher Education Students

ERIC Educational Resources Information Center

Sabo, Kent

2013-01-01

Concerted efforts have been made within teacher preparation programs to integrate teaching with technology into the curriculum. Unfortunately, these efforts continue to fall short as teachers' application of educational technology is unsophisticated and not well integrated. The most prevalent approaches to integrating technology tend to ignore…

Mixed finite-element formulations in piezoelectricity and flexoelectricity

PubMed Central

2016-01-01

Flexoelectricity, the linear coupling of strain gradient and electric polarization, is inherently a size-dependent phenomenon. The energy storage function for a flexoelectric material depends not only on polarization and strain, but also strain-gradient. Thus, conventional finite-element methods formulated solely on displacement are inadequate to treat flexoelectric solids since gradients raise the order of the governing differential equations. Here, we introduce a computational framework based on a mixed formulation developed previously by one of the present authors and a colleague. This formulation uses displacement and displacement-gradient as separate variables which are constrained in a ‘weighted integral sense’ to enforce their known relation. We derive a variational formulation for boundary-value problems for piezo- and/or flexoelectric solids. We validate this computational framework against available exact solutions. Our new computational method is applied to more complex problems, including a plate with an elliptical hole, stationary cracks, as well as tension and shear of solids with a repeating unit cell. Our results address several issues of theoretical interest, generate predictions of experimental merit and reveal interesting flexoelectric phenomena with potential for application. PMID:27436967

Mixed finite-element formulations in piezoelectricity and flexoelectricity.

PubMed

Mao, Sheng; Purohit, Prashant K; Aravas, Nikolaos

2016-06-01

Flexoelectricity, the linear coupling of strain gradient and electric polarization, is inherently a size-dependent phenomenon. The energy storage function for a flexoelectric material depends not only on polarization and strain, but also strain-gradient. Thus, conventional finite-element methods formulated solely on displacement are inadequate to treat flexoelectric solids since gradients raise the order of the governing differential equations. Here, we introduce a computational framework based on a mixed formulation developed previously by one of the present authors and a colleague. This formulation uses displacement and displacement-gradient as separate variables which are constrained in a 'weighted integral sense' to enforce their known relation. We derive a variational formulation for boundary-value problems for piezo- and/or flexoelectric solids. We validate this computational framework against available exact solutions. Our new computational method is applied to more complex problems, including a plate with an elliptical hole, stationary cracks, as well as tension and shear of solids with a repeating unit cell. Our results address several issues of theoretical interest, generate predictions of experimental merit and reveal interesting flexoelectric phenomena with potential for application.

Metagenomic chromosome conformation capture (meta3C) unveils the diversity of chromosome organization in microorganisms

PubMed Central

Marbouty, Martial; Cournac, Axel; Flot, Jean-François; Marie-Nelly, Hervé; Mozziconacci, Julien; Koszul, Romain

2014-01-01

Genomic analyses of microbial populations in their natural environment remain limited by the difficulty to assemble full genomes of individual species. Consequently, the chromosome organization of microorganisms has been investigated in a few model species, but the extent to which the features described can be generalized to other taxa remains unknown. Using controlled mixes of bacterial and yeast species, we developed meta3C, a metagenomic chromosome conformation capture approach that allows characterizing individual genomes and their average organization within a mix of organisms. Not only can meta3C be applied to species already sequenced, but a single meta3C library can be used for assembling, scaffolding and characterizing the tridimensional organization of unknown genomes. By applying meta3C to a semi-complex environmental sample, we confirmed its promising potential. Overall, this first meta3C study highlights the remarkable diversity of microorganisms chromosome organization, while providing an elegant and integrated approach to metagenomic analysis. DOI: http://dx.doi.org/10.7554/eLife.03318.001 PMID:25517076

Application of multi attribute failure mode analysis of milk production using analytical hierarchy process method

NASA Astrophysics Data System (ADS)

Rucitra, A. L.

2018-03-01

Pusat Koperasi Induk Susu (PKIS) Sekar Tanjung, East Java is one of the modern dairy industries producing Ultra High Temperature (UHT) milk. A problem that often occurs in the production process in PKIS Sekar Tanjung is a mismatch between the production process and the predetermined standard. The purpose of applying Analytical Hierarchy Process (AHP) was to identify the most potential cause of failure in the milk production process. Multi Attribute Failure Mode Analysis (MAFMA) method was used to eliminate or reduce the possibility of failure when viewed from the failure causes. This method integrates the severity, occurrence, detection, and expected cost criteria obtained from depth interview with the head of the production department as an expert. The AHP approach was used to formulate the priority ranking of the cause of failure in the milk production process. At level 1, the severity has the highest weight of 0.41 or 41% compared to other criteria. While at level 2, identifying failure in the UHT milk production process, the most potential cause was the average mixing temperature of more than 70 °C which was higher than the standard temperature (≤70 ° C). This failure cause has a contributes weight of 0.47 or 47% of all criteria Therefore, this study suggested the company to control the mixing temperature to minimise or eliminate the failure in this process.

Heavy quarkonium hybrids: Spectrum, decay, and mixing

NASA Astrophysics Data System (ADS)

Oncala, Ruben; Soto, Joan

2017-07-01

We present a largely model-independent analysis of the lighter heavy quarkonium hybrids based on the strong coupling regime of potential nonrelativistic QCD. We calculate the spectrum at leading order, including the mixing of static hybrid states. We use potentials that fulfill the required short and long distance theoretical constraints and fit well the available lattice data. We argue that the decay width to the lower lying heavy quarkonia can be reliably estimated in some cases and provide results for a selected set of decays. We also consider the mixing with heavy quarkonium states. We establish the form of the mixing potential at O (1 /mQ) , mQ being the mass of the heavy quarks, and work out its short and long distance constraints. The weak coupling regime of potential nonrelativistic QCD and the effective string theory of QCD are used for that goal. We show that the mixing effects may indeed be important and produce large spin symmetry violations. Most of the isospin zero XYZ states fit well in our spectrum, either as a hybrid or standard quarkonium candidate.

Some guidelines for structural equation modelling in cognitive neuroscience: the case of Charlton et al.'s study on white matter integrity and cognitive ageing.

PubMed

Penke, Lars; Deary, Ian J

2010-09-01

Charlton et al. (2008) (Charlton, R.A., Landua, S., Schiavone, F., Barrick, T.R., Clark, C.A., Markus, H.S., Morris, R.G.A., 2008. Structural equation modelling investigation of age-related variance in executive function and DTI-measured white matter change. Neurobiol. Aging 29, 1547-1555) presented a model that suggests a specific age-related effect of white matter integrity on working memory. We illustrate potential pitfalls of structural equation modelling by criticizing their model for (a) its neglect of latent variables, (b) its complexity, (c) its questionable causal assumptions, (d) the use of empirical model reduction, (e) the mix-up of theoretical perspectives, and (f) the failure to compare alternative models. We show that a more parsimonious model, based solely on the well-established general factor of cognitive ability, fits their data at least as well. Importantly, when modelled this way there is no support for a role of white matter integrity in cognitive aging in this sample, indicating that their conclusion is strongly dependent on how the data are analysed. We suggest that evidence from more conclusive study designs is needed. Copyright 2009 Elsevier Inc. All rights reserved.

An Integrated Vision-Based System for Spacecraft Attitude and Topology Determination for Formation Flight Missions

NASA Technical Reports Server (NTRS)

Rogers, Aaron; Anderson, Kalle; Mracek, Anna; Zenick, Ray

2004-01-01

With the space industry's increasing focus upon multi-spacecraft formation flight missions, the ability to precisely determine system topology and the orientation of member spacecraft relative to both inertial space and each other is becoming a critical design requirement. Topology determination in satellite systems has traditionally made use of GPS or ground uplink position data for low Earth orbits, or, alternatively, inter-satellite ranging between all formation pairs. While these techniques work, they are not ideal for extension to interplanetary missions or to large fleets of decentralized, mixed-function spacecraft. The Vision-Based Attitude and Formation Determination System (VBAFDS) represents a novel solution to both the navigation and topology determination problems with an integrated approach that combines a miniature star tracker with a suite of robust processing algorithms. By combining a single range measurement with vision data to resolve complete system topology, the VBAFDS design represents a simple, resource-efficient solution that is not constrained to certain Earth orbits or formation geometries. In this paper, analysis and design of the VBAFDS integrated guidance, navigation and control (GN&C) technology will be discussed, including hardware requirements, algorithm development, and simulation results in the context of potential mission applications.

Selection and dynamics of embryonic stem cell integration into early mouse embryos

PubMed Central

Alexandrova, Stoyana; Kalkan, Tuzer; Humphreys, Peter; Riddell, Andrew; Scognamiglio, Roberta; Trumpp, Andreas; Nichols, Jennifer

2016-01-01

The process by which pluripotent cells incorporate into host embryos is of interest to investigate cell potency and cell fate decisions. Previous studies suggest that only a minority of the embryonic stem cell (ESC) inoculum contributes to the adult chimaera. How incoming cells are chosen for integration or elimination remains unclear. By comparing a heterogeneous mix of undifferentiated and differentiating ESCs (serum/LIF) with more homogeneous undifferentiated culture (2i/LIF), we examine the role of cellular heterogeneity in this process. Time-lapse ex vivo imaging revealed a drastic elimination of serum/LIF ESCs during early development in comparison with 2i/LIF ESCs. Using a fluorescent reporter for naive pluripotency (Rex1-GFP), we established that the acutely eliminated serum/LIF ESCs had started to differentiate. The rejected cells were apparently killed by apoptosis. We conclude that a selection process exists by which unwanted differentiating cells are eliminated from the embryo. However, occasional Rex1− cells were able to integrate. Upregulation of Rex1 occurred in a proportion of these cells, reflecting the potential of the embryonic environment to expedite diversion from differentiation priming to enhance the developing embryonic epiblast. PMID:26586221

A model for the estimation of the surface fluxes of momentum, heat and moisture of the cloud topped marine atmospheric boundary layer from satellite measurable parameters. M.S. Thesis

NASA Technical Reports Server (NTRS)

Allison, D. E.

1984-01-01

A model is developed for the estimation of the surface fluxes of momentum, heat, and moisture of the cloud topped marine atmospheric boundary layer by use of satellite remotely sensed parameters. The parameters chosen for the problem are the integrated liquid water content, q sub li, the integrated water vapor content, q sub vi, the cloud top temperature, and either a measure of the 10 meter neutral wind speed or the friction velocity at the surface. Under the assumption of a horizontally homogeneous, well-mixed boundary layer, the model calculates the equivalent potential temperature and total water profiles of the boundary layer along with the boundary layer height from inputs of q sub li, q sub vi, and cloud top temperature. These values, along with the 10m neutral wind speed or friction velocity and the sea surface temperature are then used to estimate the surface fluxes. The development of a scheme to parameterize the integrated water vapor outside of the boundary layer for the cases of cold air outbreak and California coastal stratus is presented.

Integrated impacts of future electricity mix scenarios on select southeastern US water resources

NASA Astrophysics Data System (ADS)

Yates, D.; Meldrum, J.; Flores-Lopez, F.; Davis, Michelle

2013-09-01

Recent studies on the relationship between thermoelectric cooling and water resources have been made at coarse geographic resolution and do not adequately evaluate the localized water impacts on specific rivers and water bodies. We present the application of an integrated electricity generation-water resources planning model of the Apalachicola/Chattahoochee/Flint (ACF) and Alabama-Coosa-Tallapoosa (ACT) rivers based on the regional energy deployment system (ReEDS) and the water evaluation and planning (WEAP) system. A future scenario that includes a growing population and warmer, drier regional climate shows that benefits from a low-carbon, electricity fuel-mix could help maintain river temperatures below once-through coal-plants. These impacts are shown to be localized, as the cumulative impacts of different electric fuel-mix scenarios are muted in this relatively water-rich region, even in a warmer and drier future climate.

Mixed heavy–light matching in the Universal One-Loop Effective Action

DOE PAGES

Ellis, Sebastian A. R.; Quevillon, Jérémie; You, Tevong; ...

2016-11-10

Recently, a general result for evaluating the path integral at one loop was obtained in the form of the Universal One-Loop Effective Action. It may be used to derive effective field theory operators of dimensions up to six, by evaluating the traces of matrices in this expression, with the mass dependence encapsulated in the universal coefficients. In this study we show that it can account for loops of mixed heavy–light particles in the matching procedure. Our prescription for computing these mixed contributions to the Wilson coefficients is conceptually simple. Moreover it has the advantage of maintaining the universal structure ofmore » the effective action, which we illustrate using the example of integrating out a heavy electroweak triplet scalar coupling to a light Higgs doublet. Finally we also identify new structures that were previously neglected in the universal results.« less

Method for fabricating solar cells having integrated collector grids

NASA Technical Reports Server (NTRS)

Evans, J. C., Jr. (Inventor)

1979-01-01

A heterojunction or Schottky barrier photovoltaic device comprising a conductive base metal layer compatible with and coating predominately the exposed surface of the p-type substrate of the device such that a back surface field region is formed at the interface between the device and the base metal layer, a transparent, conductive mixed metal oxide layer in integral contact with the n-type layer of the heterojunction or Schottky barrier device having a metal alloy grid network of the same metal elements of the oxide constituents of the mixed metal oxide layer embedded in the mixed metal oxide layer, an insulating layer which prevents electrical contact between the conductive metal base layer and the transparent, conductive metal oxide layer, and a metal contact means covering the insulating layer and in intimate contact with the metal grid network embedded in the transparent, conductive oxide layer for conducting electrons generated by the photovoltaic process from the device.

On mixed reality environments for minimally invasive therapy guidance: Systems architecture, successes and challenges in their implementation from laboratory to clinic

PubMed Central

Linte, Cristian A.; Davenport, Katherine P.; Cleary, Kevin; Peters, Craig; Vosburgh, Kirby G.; Navab, Nassir; Edwards, Philip “Eddie”; Jannin, Pierre; Peters, Terry M.; Holmes, David R.; Robb, Richard A.

2013-01-01

Mixed reality environments for medical applications have been explored and developed over the past three decades in an effort to enhance the clinician’s view of anatomy and facilitate the performance of minimally invasive procedures. These environments must faithfully represent the real surgical field and require seamless integration of pre- and intra-operative imaging, surgical instrument tracking, and display technology into a common framework centered around and registered to the patient. However, in spite of their reported benefits, few mixed reality environments have been successfully translated into clinical use. Several challenges that contribute to the difficulty in integrating such environments into clinical practice are presented here and discussed in terms of both technical and clinical limitations. This article should raise awareness among both developers and end-users toward facilitating a greater application of such environments in the surgical practice of the future. PMID:23632059

Digital integrated control of a Mach 2.5 mixed-compression supersonic inlet and an augmented mixed-flow turbofan engine

NASA Technical Reports Server (NTRS)

Batterton, P. G.; Arpasi, D. J.; Baumbick, R. J.

1974-01-01

A digitally implemented integrated inlet-engine control system was designed and tested on a mixed-compression, axisymmetric, Mach 2.5, supersonic inlet with 45 percent internal supersonic area contraction and a TF30-P-3 augmented turbofan engine. The control matched engine airflow to available inlet airflow. By monitoring inlet terminal shock position and over-board bypass door command, the control adjusted engine speed so that in steady state, the shock would be at the desired location and the overboard bypass doors would be closed. During engine-induced transients, such as augmentor light-off and cutoff, the inlet operating point was momentarily changed to a more supercritical point to minimize unstarts. The digital control also provided automatic inlet restart. A variable inlet throat bleed control, based on throat Mach number, provided additional inlet stability margin.

Security-Oriented and Load-Balancing Wireless Data Routing Game in the Integration of Advanced Metering Infrastructure Network in Smart Grid

DOE Office of Scientific and Technical Information (OSTI.GOV)

He, Fulin; Cao, Yang; Zhang, Jun Jason

Ensuring flexible and reliable data routing is indispensable for the integration of Advanced Metering Infrastructure (AMI) networks, we propose a secure-oriented and load-balancing wireless data routing scheme. A novel utility function is designed based on security routing scheme. Then, we model the interactive security-oriented routing strategy among meter data concentrators or smart grid meters as a mixed-strategy network formation game. Finally, such problem results in a stable probabilistic routing scheme with proposed distributed learning algorithm. One contributions is that we studied that different types of applications affect the routing selection strategy and the strategy tendency. Another contributions is that themore » chosen strategy of our mixed routing can adaptively to converge to a new mixed strategy Nash equilibrium (MSNE) during the learning process in the smart grid.« less

Combustor cap having non-round outlets for mixing tubes

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hughes, Michael John; Boardman, Gregory Allen; McConnaughhay, Johnie Franklin

2016-12-27

A system includes a a combustor cap configured to be coupled to a plurality of mixing tubes of a multi-tube fuel nozzle, wherein each mixing tube of the plurality of mixing tubes is configured to mix air and fuel to form an air-fuel mixture. The combustor cap includes multiple nozzles integrated within the combustor cap. Each nozzle of the multiple nozzles is coupled to a respective mixing tube of the multiple mixing tubes. In addition, each nozzle of the multiple nozzles includes a first end and a second end. The first end is coupled to the respective mixing tube ofmore » the multiple mixing tubes. The second end defines a non-round outlet for the air-fuel mixture. Each nozzle of the multiple nozzles includes an inner surface having first and second portions, the first portion radially diverges along an axial direction from the first end to the second end, and the second portion radially converges along the axial direction from the first end to the second end.« less

Clinical physiology grand rounds.

PubMed

Richards, Jeremy; Schwartzstein, Richard; Irish, Julie; Almeida, Jacqueline; Roberts, David

2013-04-01

Clinical Physiology Grand Rounds (CPGR) is an interactive, case-based conference for medical students designed to: (1) integrate preclinical and clinical learning; (2) promote inductive clinical reasoning; and (3) emphasise students as peer teachers. CPGR specifically encourages mixed learning level student interactions and emphasises the use of concept mapping. We describe the theoretical basis and logistical considerations for an interactive, integrative, mixed-learner environment such as CPGR. In addition, we report qualitative data regarding students' attitudes towards and perceptions of CPGR. Medical students from first to fourth year participate in a monthly, interactive conference. The CPGR was designed to bridge gaps and reinforce linkages between basic science and clinical concepts, and to incorporate interactive vertical integration between preclinical and clinical students. Medical education and content experts use Socratic, interactive teaching methods to develop real-time concept maps to emphasise the presence and importance of linkages across curricula. Student focus groups were held to assess attitudes towards and perceptions of the mixed-learner environment and concept maps in CPGR. Qualitative analyses of focus group transcripts were performed to develop themes and codes describing the students' impressions of CPGR. CPGR is a case-based, interactive conference designed to help students gain an increased appreciation of linkages between basic science and clinical medicine concepts, and an increased awareness of clinical reasoning thought processes. Success is dependent upon explicit attention being given to goals for students' integrated learning. © Blackwell Publishing Ltd 2013.

Mixed-signal 0.18μm CMOS and SiGe BiCMOS foundry technologies for ROIC applications

NASA Astrophysics Data System (ADS)

Kar-Roy, Arjun; Howard, David; Racanelli, Marco; Scott, Mike; Hurwitz, Paul; Zwingman, Robert; Chaudhry, Samir; Jordan, Scott

2010-10-01

Today's readout integrated-circuits (ROICs) require a high level of integration of high performance analog and low power digital logic. TowerJazz offers a commercial 0.18μm CMOS technology platform for mixed-signal, RF, and high performance analog applications which can be used for ROIC applications. The commercial CA18HD dual gate oxide 1.8V/3.3V and CA18HA dual gate oxide 1.8V/5V RF/mixed signal processes, consisting of six layers of metallization, have high density stacked linear MIM capacitors, high-value resistors, triple-well isolation and thick top aluminum metal. The CA18HA process also has scalable drain extended LDMOS devices, up to 40V Vds, for high-voltage sensor applications, and high-performance bipolars for low noise requirements in ROICs. Also discussed are the available features of the commercial SBC18 SiGe BiCMOS platform with SiGe NPNs operating up to 200/200GHz (fT/fMAX frequencies in manufacturing and demonstrated to 270 GHz fT, for reduced noise and integrated RF capabilities which could be used in ROICs. Implementation of these technologies in a thick film SOI process for integrated RF switch and power management and the availability of high fT vertical PNPs to enable complementary BiCMOS (CBiCMOS), for RF enabled ROICs, are also described in this paper.

An integrated approach to evaluate the Aji-Chai potash resources in Iran using potential field data

NASA Astrophysics Data System (ADS)

Abedi, Maysam

2018-03-01

This work presents an integrated application of potential field data to discover potash-bearing evaporite sources in Aji-Chai salt deposit, located in east Azerbaijan province, northwest of Iran. Low density and diamagnetic effect of salt minerals, i.e. potash, give rise to promising potential field anomalies that assist to localize sought blind targets. The halokinetic-type potash-bearing salts in the prospect zone have flowed upward and intruded into surrounded sedimentary sequences dominated frequently by marl, gypsum and alluvium terraces. Processed gravity and magnetic data delineated a main potash source with negative gravity and magnetic amplitude responses. To better visualize these evaporite deposits, 3D model of density contrast and magnetic susceptibility was constructed through constrained inversion of potential field data. A mixed-norm regularization technique was taken into account to generate sharp and compact geophysical models. Since tectonic pressure causes vertical movement of the potash in the studied region, a simple vertical cylindrical shape is an appropriate geometry to simulate these geological targets. Therefore, structural index (i.e. decay rate of potential field amplitude with distance) of such assumed source was embedded in the inversion program as a geometrical constraint to image these geologically plausible sources. In addition, the top depth of the main and the adjacent sources were estimated 39 m and 22 m, respectively, via the combination of the analytic signal and the Euler deconvolution techniques. Drilling result also indicated that the main source of potash starts at a depth of 38 m. The 3D models of the density contrast and the magnetic susceptibility (assuming a superficial sedimentary cover as a hard constraint in the inversion algorithm) demonstrated that potash source has an extension in depth less than 150 m.

Laboratory study - laboratory testing of bridge deck mixes

DOT National Transportation Integrated Search

2003-03-01

The purpose of this investigation was to develop bridge deck mixes that will improve field performance and minimize cracking potential compared to MoDOT's current (B-2) bridge deck mix design. The mix designs developed in this study were tested and c...

Integrated care as a means to improve primary care delivery for adults and adolescents in the developing world: a critical analysis of Integrated Management of Adolescent and Adult Illness (IMAI).

PubMed

Vasan, Ashwin; Ellner, Andrew; Lawn, Stephen D; Gove, Sandy; Anatole, Manzi; Gupta, Neil; Drobac, Peter; Nicholson, Tom; Seung, Kwonjune; Mabey, David C; Farmer, Paul E

2014-01-14

More than three decades after the 1978 Declaration of Alma-Ata enshrined the goal of 'health for all', high-quality primary care services remain undelivered to the great majority of the world's poor. This failure to effectively reach the most vulnerable populations has been, in part, a failure to develop and implement appropriate and effective primary care delivery models. This paper examines a root cause of these failures, namely that the inability to achieve clear and practical consensus around the scope and aims of primary care may be contributing to ongoing operational inertia. The present work also examines integrated models of care as a strategy to move beyond conceptual dissonance in primary care and toward implementation. Finally, this paper examines the strengths and weaknesses of a particular model, the World Health Organization's Integrated Management of Adolescent and Adult Illness (IMAI), and its potential as a guidepost toward improving the quality of primary care delivery in poor settings. Integration and integrated care may be an important approach in establishing a new paradigm of primary care delivery, though overall, current evidence is mixed. However, a number of successful specific examples illustrate the potential for clinical and service integration to positively impact patient care in primary care settings. One example deserving of further examination is the IMAI, developed by the World Health Organization as an operational model that integrates discrete vertical interventions into a comprehensive delivery system encompassing triage and screening, basic acute and chronic disease care, basic prevention and treatment services, and follow-up and referral guidelines. IMAI is an integrated model delivered at a single point-of-care using a standard approach to each patient based on the universal patient history and physical examination. The evidence base on IMAI is currently weak, but whether or not IMAI itself ultimately proves useful in advancing primary care delivery, it is these principles that should serve as the basis for developing a standard of integrated primary care delivery for adults and adolescents that can serve as the foundation for ongoing quality improvement. As integrated primary care is the standard of care in the developed world, so too must we move toward implementing integrated models of primary care delivery in poorer settings. Models such as IMAI are an important first step in this evolution. A robust and sustained commitment to innovation, research and quality improvement will be required if integrated primary care delivery is to become a reality in developing world.

Understanding the experience of place: expanding methods to conceptualize and measure community integration of persons with serious mental illness.

PubMed

Townley, Greg; Kloos, Bret; Wright, Patricia A

2009-06-01

Community integration research explores community contexts and factors that encourage or hinder individuals with serious mental illness (SMI) from actively participating in community life. This research agenda can be advanced by using mixed-methods that better document the relationships between contextual factors and individual experience. Two such methods were applied to a mixed-methods study of 40 adults with SMI living in independent housing in the Southeastern United States. Their contextualized experiences of community integration were measured by applying innovative participatory mapping and Geographic Information Systems (GIS) mapping techniques. Use of these methods in conjunction with one another facilitated the creation of activity spaces, which can measure geographic accessibility and help to represent an individual's experience of place and degree of mobility. The utility of these newly applied methods for better understanding community integration for persons with SMI is explored and implications for using these measures in research and practice are discussed.

Energy efficient engine preliminary design and integration study

NASA Technical Reports Server (NTRS)

Gray, D. E.

1978-01-01

The technology and configurational requirements of an all new 1990's energy efficient turbofan engine having a twin spool arrangement with a directly coupled fan and low-pressure turbine, a mixed exhaust nacelle, and a high 38.6:1 overall pressure ratio were studied. Major advanced technology design features required to provide the overall benefits were a high pressure ratio compression system, a thermally actuated advanced clearance control system, lightweight shroudless fan blades, a low maintenance cost one-stage high pressure turbine, a short efficient mixer and structurally integrated engine and nacelle. A conceptual design analysis was followed by integration and performance analyses of geared and direct-drive fan engines with separate or mixed exhaust nacelles to refine previously designed engine cycles. Preliminary design and more detailed engine-aircraft integration analysis were then conducted on the more promising configurations. Engine and aircraft sizing, fuel burned, and airframe noise studies on projected 1990's domestic and international aircraft produced sufficient definition of configurational and advanced technology requirements to allow immediate initiation of component technology development.

Understanding the experience of place: Expanding methods to conceptualize and measure community integration of persons with serious mental illness

PubMed Central

Townley, Greg; Kloos, Bret; Wright, Patricia A.

2008-01-01

Community integration research explores community contexts and factors that encourage or hinder individuals with serious mental illness (SMI) from actively participating in community life. This research agenda can be advanced by using mixed-methods that better document the relationships between contextual factors and individual experience. Two such methods were applied to a mixed-methods study of 40 adults with SMI living in independent housing in the Southeastern United States. Their contextualized experiences of community integration were measured by applying innovative participatory mapping and Geographic Information Systems (GIS) mapping techniques. Use of these methods in conjunction with one another facilitated the creation of activity spaces, which can measure geographic accessibility and help to represent an individual's experience of place and degree of mobility. The utility of these newly applied methods for better understanding community integration for persons with SMI is explored and implications for using these measures in research and practice are discussed. PMID:19062326

[Display technologies for augmented reality in medical applications].

PubMed

Eck, Ulrich; Winkler, Alexander

2018-04-01

One of the main challenges for modern surgery is the effective use of the many available imaging modalities and diagnostic methods. Augmented reality systems can be used in the future to blend patient and planning information into the view of surgeons, which can improve the efficiency and safety of interventions. In this article we present five visualization methods to integrate augmented reality displays into medical procedures and the advantages and disadvantages are explained. Based on an extensive literature review the various existing approaches for integration of augmented reality displays into medical procedures are divided into five categories and the most important research results for each approach are presented. A large number of mixed and augmented reality solutions for medical interventions have been developed as research prototypes; however, only very few systems have been tested on patients. In order to integrate mixed and augmented reality displays into medical practice, highly specialized solutions need to be developed. Such systems must comply with the requirements with respect to accuracy, fidelity, ergonomics and seamless integration into the surgical workflow.

Efficient evaluation of Coulomb integrals in a mixed Gaussian and plane-wave basis using the density fitting and Cholesky decomposition.

PubMed

Čársky, Petr; Čurík, Roman; Varga, Štefan

2012-03-21

The objective of this paper is to show that the density fitting (resolution of the identity approximation) can also be applied to Coulomb integrals of the type (k(1)(1)k(2)(1)|g(1)(2)g(2)(2)), where k and g symbols refer to plane-wave functions and gaussians, respectively. We have shown how to achieve the accuracy of these integrals that is needed in wave-function MO and density functional theory-type calculations using mixed Gaussian and plane-wave basis sets. The crucial issues for achieving such a high accuracy are application of constraints for conservation of the number electrons and components of the dipole moment, optimization of the auxiliary basis set, and elimination of round-off errors in the matrix inversion. © 2012 American Institute of Physics

SVGA and XGA active matrix microdisplays for head-mounted applications

NASA Astrophysics Data System (ADS)

Alvelda, Phillip; Bolotski, Michael; Brown, Imani L.

2000-03-01

The MicroDisplay Corporation's liquid crystal on silicon (LCOS) display devices are based on the union of several technologies with the extreme integration capability of conventionally fabricated CMOS substrates. The fast liquid crystal operation modes and new scalable high-performance pixel addressing architectures presented in this paper enable substantially improved color, contrast, and brightness while still satisfying the optical, packaging, and power requirements of portable applications. The entire suite of MicroDisplay's technologies was devised to create a line of mixed-signal application-specific integrated circuits (ASICs) in single-chip display systems. Mixed-signal circuits can integrate computing, memory, and communication circuitry on the same substrate as the display drivers and pixel array for a multifunctional complete system-on-a-chip. System-on-a-chip benefits also include reduced head supported weight requirements through the elimination of off-chip drive electronics.

Mixed micelles of 7,12-dioxolithocholic acid and selected hydrophobic bile acids: interaction parameter, partition coefficient of nitrazepam and mixed micelles haemolytic potential.

PubMed

Poša, Mihalj; Tepavčević, Vesna

2011-09-01

The formation of mixed micelles built of 7,12-dioxolithocholic and the following hydrophobic bile acids was examined by conductometric method: cholic (C), deoxycholic (D), chenodeoxycholic (CD), 12-oxolithocholic (12-oxoL), 7-oxolithocholic (7-oxoL), ursodeoxycholic (UD) and hiodeoxycholic (HD). Interaction parameter (β) in the studied binary mixed micelles had negative value, suggesting synergism between micelle building units. Based on β value, the hydrophobic bile acids formed two groups: group I (C, D and CD) and group II (12-oxoL, 7-oxoL, UD and HD). Bile acids from group II had more negative β values than bile acids from group I. Also, bile acids from group II formed intermolecular hydrogen bonds in aggregates with both smaller (2) and higher (4) aggregation numbers, according to the analysis of their stereochemical (conformational) structures and possible structures of mixed micelles built of these bile acids and 7,12-dioxolithocholic acid. Haemolytic potential and partition coefficient of nitrazepam were higher in mixed micelles built of the more hydrophobic bile acids (C, D, CD) and 7,12-dioxolithocholic acid than in micelles built only of 7,12-dioxolithocholic acid. On the other hand, these mixed micelles still had lower values of haemolytic potential than micelles built of C, D or CD. The mixed micelles that included bile acids: 12-oxoL, 7-oxoL, UD or HD did not significantly differ from the micelles of 7,12-dioxolithocholic acid, observing the values of their haemolytic potential. Copyright © 2011 Elsevier B.V. All rights reserved.

Does cultural integration explain a mental health advantage for adolescents?

PubMed

Bhui, Kamaldeep S; Lenguerrand, Erik; Maynard, Maria J; Stansfeld, Stephen A; Harding, Seeromanie

2012-06-01

A mental health advantage has been observed among adolescents in urban areas. This prospective study tests whether cultural integration measured by cross-cultural friendships explains a mental health advantage for adolescents. A prospective cohort of adolescents was recruited from 51 secondary schools in 10 London boroughs. Cultural identity was assessed by friendship choices within and across ethnic groups. Cultural integration is one of four categories of cultural identity. Using gender-specific linear-mixed models we tested whether cultural integration explained a mental health advantage, and whether gender and age were influential. Demographic and other relevant factors, such as ethnic group, socio-economic status, family structure, parenting styles and perceived racism were also measured and entered into the models. Mental health was measured by the Strengths and Difficulties Questionnaire as a 'total difficulties score' and by classification as a 'probable clinical case'. A total of 6643 pupils in first and second years of secondary school (ages 11-13 years) took part in the baseline survey (2003/04) and 4785 took part in the follow-up survey in 2005-06. Overall mental health improved with age, more so in male rather than female students. Cultural integration (friendships with own and other ethnic groups) was associated with the lowest levels of mental health problems especially among male students. This effect was sustained irrespective of age, ethnicity and other potential explanatory variables. There was a mental health advantage among specific ethnic groups: Black Caribbean and Black African male students (Nigerian/Ghanaian origin) and female Indian students. This was not fully explained by cultural integration, although cultural integration was independently associated with better mental health. Cultural integration was associated with better mental health, independent of the mental health advantage found among specific ethnic groups: Black Caribbean and some Black African male students and female Indian students.

Dynamic substrate preferences predict metabolic properties of a simple microbial consortium

DOE PAGES

Erbilgin, Onur; Bowen, Benjamin P.; Kosina, Suzanne M.; ...

2017-01-23

Mixed cultures of different microbial species are increasingly being used to carry out a specific biochemical function in lieu of engineering a single microbe to do the same t ask. However, knowing how different species' metabolisms will integrate to reach a desired outcome is a difficult problem that has been studied in great detail using steady-state models. However, many biotechnological processes, as well as natural habitats, represent a more dynamic system. Examining how individual species use resources in their growth medium or environment (exometabolomics) over time in batch culture conditions can provide rich phenotypic data that encompasses regulation and transporters,more » creating an opportunity to integrate the data into a predictive model of resource use by a mixed community. Here we use exometabolomic profiling to examine the time-varying substrate depletion from a mixture of 19 amino acids and glucose by two Pseudomonas and one Bacillus species isolated from ground water. Contrary to studies in model organisms, we found surprisingly few correlations between resource preferences and maximal growth rate or biomass composition. We then modeled patterns of substrate depletion, and used these models to examine if substrate usage preferences and substrate depletion kinetics of individual isolates can be used to predict the metabolism of a co-culture of the isolates. We found that most of the substrates fit the model predictions, except for glucose and histidine, which were depleted more slowly than predicted, and proline, glycine, glutamate, lysine and arginine, which were all consumed significantly faster. Our results indicate that a significant portion of a model community's overall metabolism can be predicted based on the metabolism of the individuals. Based on the nature of our model, the resources that significantly deviate from the prediction highlight potential metabolic pathways affected by species-species interactions, which when further studied can potentially be used to modulate microbial community structure and/or function.« less

Divergence preserving discrete surface integral methods for Maxwell's curl equations using non-orthogonal unstructured grids

NASA Technical Reports Server (NTRS)

Madsen, Niel K.

1992-01-01

Several new discrete surface integral (DSI) methods for solving Maxwell's equations in the time-domain are presented. These methods, which allow the use of general nonorthogonal mixed-polyhedral unstructured grids, are direct generalizations of the canonical staggered-grid finite difference method. These methods are conservative in that they locally preserve divergence or charge. Employing mixed polyhedral cells, (hexahedral, tetrahedral, etc.) these methods allow more accurate modeling of non-rectangular structures and objects because the traditional stair-stepped boundary approximations associated with the orthogonal grid based finite difference methods can be avoided. Numerical results demonstrating the accuracy of these new methods are presented.

Utilizing media arts principles for developing effective interactive neurorehabilitation systems.

PubMed

Rikakis, Thanassis

2011-01-01

This paper discusses how interactive neurorehabilitation systems can increase their effectiveness through systematic integration of media arts principles and practice. Media arts expertise can foster the development of complex yet intuitive extrinsic feedback displays that match the inherent complexity and intuitive nature of motor learning. Abstract, arts-based feedback displays can be powerful metaphors that provide re-contextualization, engagement and appropriate reward mechanisms for mature adults. Such virtual feedback displays must be seamlessly integrated with physical components to produce mixed reality training environments that promote active, generalizable learning. The proposed approaches are illustrated through examples from mixed reality rehabilitation systems developed by our team.

Promising Perceptions, Divergent Practices and Barriers to Integrated Malaria Prevention in Wakiso District, Uganda: A Mixed Methods Study

PubMed Central

Musoke, David; Miiro, George; Karani, George; Morris, Keith; Kasasa, Simon; Ndejjo, Rawlance; Nakiyingi-Miiro, Jessica; Guwatudde, David; Musoke, Miph Boses

2015-01-01

Background The World Health Organization recommends use of multiple approaches to control malaria. The integrated approach to malaria prevention advocates the use of several malaria prevention methods in a holistic manner. This study assessed perceptions and practices on integrated malaria prevention in Wakiso district, Uganda. Methods A clustered cross-sectional survey was conducted among 727 households from 29 villages using both quantitative and qualitative methods. Assessment was done on awareness of various malaria prevention methods, potential for use of the methods in a holistic manner, and reasons for dislike of certain methods. Households were classified as using integrated malaria prevention if they used at least two methods. Logistic regression was used to test for factors associated with the use of integrated malaria prevention while adjusting for clustering within villages. Results Participants knew of the various malaria prevention methods in the integrated approach including use of insecticide treated nets (97.5%), removing mosquito breeding sites (89.1%), clearing overgrown vegetation near houses (97.9%), and closing windows and doors early in the evenings (96.4%). If trained, most participants (68.6%) would use all the suggested malaria prevention methods of the integrated approach. Among those who would not use all methods, the main reasons given were there being too many (70.2%) and cost (32.0%). Only 33.0% households were using the integrated approach to prevent malaria. Use of integrated malaria prevention by households was associated with reading newspapers (AOR 0.34; 95% CI 0.22 –0.53) and ownership of a motorcycle/car (AOR 1.75; 95% CI 1.03 – 2.98). Conclusion Although knowledge of malaria prevention methods was high and perceptions on the integrated approach promising, practices on integrated malaria prevention was relatively low. The use of the integrated approach can be improved by promoting use of multiple malaria prevention methods through various communication channels such as mass media. PMID:25837978

Chemical potential of carbon in the system UPuCON: Measurements and calculation

NASA Astrophysics Data System (ADS)

Anthonysamy, S.; Ananthasivan, K.; Kahappan, I.; Chandramouli, V.; Vasudeva Rao, P. R.; Mathews, C. K.; Jacob, K. T.

1995-05-01

The carbon potential of (U,Pu) mixed carbides with Pu/(U + Pu) ratios of 0.55 and 0.70 was measured in the temperature range 973 to 1173 K by employing a methane-hydrogen gas equilibration technique. The technique was validated by measuring the Gibbs energy of formation of WC. The compatibility of the mixed carbides with the stainless steel clad was analysed by using the measured carbon potentials. The carbon potentials of mixed carbides of other compositions were calculated theoretically in order to assess their compatibility. The calculations assume ideal solution behavior for all the solid solutions present in the UPuCON system.

A CFD Study of Jet Mixing in Reduced Flow Areas for Lower Combustor Emissions

NASA Technical Reports Server (NTRS)

Smith, C. E.; Talpallikar, M. V.; Holdeman, J. D.

1991-01-01

The Rich-burn/Quick-mix/Lean-burn (RQL) combustor has the potential of significantly reducing NO(x) emissions in combustion chambers of High Speed Civil Transport aircraft. Previous work on RQL combustors for industrial applications suggested the benefit of necking down the mixing section. A 3-D numerical investigation was performed to study the effects of neckdown on NO(x) emissions and to develop a correlation for optimum mixing designs in terms of neckdown area ratio. The results of the study showed that jet mixing in reduced flow areas does not enhance mixing, but does decrease residence time at high flame temperatures, thus reducing NO(x) formation. By necking down the mixing flow area by 4, a potential NO(x) reduction of 16:1 is possible for annual combustors. However, there is a penalty that accompanies the mixing neckdown: reduced pressure drop across the combustor swirler. At conventional combustor loading parameters, the pressure drop penalty does not appear to be excessive.

Evaluating potential trade-offs among fuel treatment strategies in mixed-conifer forests of the Sierra Nevada

Treesearch

Jens T. Stevens; Brandon M. Collins; Jonathan W. Long; Malcolm P. North; Susan J. Prichard; Leland W. Tarnay; Angela M. White

2016-01-01

Fuel treatments in fire-suppressed mixed-conifer forests are designed to moderate potential wildfire behavior and effects. However, the objectives for modifying potential fire effects can vary widely, from improving fire suppression efforts and protecting infrastructure, to reintroducing low-severity fire, to restoring and maintaining variable forest structure and...

Population-based medical and disease management: an evaluation of cost and quality.

PubMed

Wise, Christopher G; Bahl, Vinita; Mitchell, Rita; West, Brady T; Carli, Thomas

2006-02-01

Reports by the Institute of Medicine and the Health Care Financing Administration have emphasized that the integration of medical care delivery, evidence-based medicine, and chronic care disease management may play a significant role in improving the quality of care and reducing medical care costs. The specific aim of this project is to assess the impact of an integrated set of care coordination tools and chronic disease management interventions on utilization, cost, and quality of care for a population of beneficiaries who have complementary health coverage through a plan designed to apply proactive medical and disease management processes. The utilization of health care services by the study population was compared to another population from the same geographic service area and covered by a traditional fee-for-service indemnity insurance plan that provided few medical or disease management services. Evaluation of the difference in utilization was based on the difference in the cost per-member-per-month (PMPM) in a 1-year measurement period, after adjusting for differences in fee schedules, case-mix and healthcare benefit design. After adjustments for both case-mix and benefit differences, the study group is $63 PMPM less costly than the comparison population for all members. Cost differences are largest in the 55-64 and 65 and above age groups. The study group is $115 PMPM lower than the comparison population for the age category of 65 years and older, after adjustments for case-mix and benefits. Health Plan Employer and Data Information Set (HEDIS)-based quality outcomes are near the 90th percentile for most indications. The cost outcomes of a population served by proactive, population-based disease management and complex care management, compared to an unmanaged population, demonstrates the potential of coordinated medical and disease management programs. Further studies utilizing appropriate methodologies would be beneficial.

Local short-term variability in solar irradiance

NASA Astrophysics Data System (ADS)

Lohmann, Gerald M.; Monahan, Adam H.; Heinemann, Detlev

2016-05-01

Characterizing spatiotemporal irradiance variability is important for the successful grid integration of increasing numbers of photovoltaic (PV) power systems. Using 1 Hz data recorded by as many as 99 pyranometers during the HD(CP)2 Observational Prototype Experiment (HOPE), we analyze field variability of clear-sky index k* (i.e., irradiance normalized to clear-sky conditions) and sub-minute k* increments (i.e., changes over specified intervals of time) for distances between tens of meters and about 10 km. By means of a simple classification scheme based on k* statistics, we identify overcast, clear, and mixed sky conditions, and demonstrate that the last of these is the most potentially problematic in terms of short-term PV power fluctuations. Under mixed conditions, the probability of relatively strong k* increments of ±0.5 is approximately twice as high compared to increment statistics computed without conditioning by sky type. Additionally, spatial autocorrelation structures of k* increment fields differ considerably between sky types. While the profiles for overcast and clear skies mostly resemble the predictions of a simple model published by , this is not the case for mixed conditions. As a proxy for the smoothing effects of distributed PV, we finally show that spatial averaging mitigates variability in k* less effectively than variability in k* increments, for a spatial sensor density of 2 km-2.

How to Construct a Mixed Methods Research Design.

PubMed

Schoonenboom, Judith; Johnson, R Burke

2017-01-01

This article provides researchers with knowledge of how to design a high quality mixed methods research study. To design a mixed study, researchers must understand and carefully consider each of the dimensions of mixed methods design, and always keep an eye on the issue of validity. We explain the seven major design dimensions: purpose, theoretical drive, timing (simultaneity and dependency), point of integration, typological versus interactive design approaches, planned versus emergent design, and design complexity. There also are multiple secondary dimensions that need to be considered during the design process. We explain ten secondary dimensions of design to be considered for each research study. We also provide two case studies showing how the mixed designs were constructed.

Development of a Mixed Methods Investigation of Process and Outcomes of Community-Based Participatory Research

PubMed Central

Lucero, Julie; Wallerstein, Nina; Duran, Bonnie; Alegria, Margarita; Greene-Moton, Ella; Israel, Barbara; Kastelic, Sarah; Magarati, Maya; Oetzel, John; Pearson, Cynthia; Schulz, Amy; Villegas, Malia; White Hat, Emily R.

2017-01-01

This article describes a mixed methods study of community-based participatory research (CBPR) partnership practices and the links between these practices and changes in health status and disparities outcomes. Directed by a CBPR conceptual model and grounded in indigenous-transformative theory, our nation-wide, cross-site study showcases the value of a mixed methods approach for better understanding the complexity of CBPR partnerships across diverse community and research contexts. The article then provides examples of how an iterative, integrated approach to our mixed methods analysis yielded enriched understandings of two key constructs of the model: trust and governance. Implications and lessons learned while using mixed methods to study CBPR are provided. PMID:29230152

In vitro - in vivo correlations for endocrine activity of a mixture of currently used pesticides

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taxvig, Camilla, E-mail: camta@food.dtu.dk; Hadrup, Niels; Boberg, Julie

Two pesticide mixtures were investigated for potential endocrine activity. Mix 3 consisted of bitertanol, propiconazole, and cypermethrin, and Mix 5 included malathion and terbuthylazine in addition to the three pesticides in Mix 3. All five single pesticides and the two mixtures were investigated for their ability to affect steroidogenesis in vitro in H295R cells. The pesticides alone and both mixtures affected steroidogenesis with both mixtures causing increase in progesterone and decrease in testosterone. For Mix 5 an increase in estradiol was seen as well, indicating increased aromatase activity. The two mixtures were also investigated in pregnant rats dosed from gestationalmore » day 7 to 21, followed by examination of dams and fetuses. Decreased estradiol and reduced placental testosterone were seen in dams exposed to Mix 5. Also a significant increase in aromatase mRNA-levels in female adrenal glands was found for Mix5. However, either of the two mixtures showed any effects on fetal hormone levels in plasma or testis, or on anogenital distance. Overall, potential aromatase induction was found for Mix 5 both in vitro and in vivo, but not for Mix 3, an effect likely owed to terbuthylazine in Mix 5. However, the hormonal responses in vitro were only partly reflected in vivo, probably due to some toxicokinetic issues, as the pesticide levels in the amniotic fluid also were found to be negatively affected by the number of compounds present in the mixtures. Nonetheless, the H295R assay gives hints on conceivable interference with steroidogenesis, thus generating hypotheses on in vivo effects. - Highlights: • The study examines the endocrine disrupting potential of mixtures of pesticides. • All single pesticides and both mixtures affected steroidogenesis in vitro. • Potential aromatase induction was found for Mix 5 both in vitro and in vivo. • The hormonal responses in vitro were only partly reflected in vivo.« less

Guarani Morphology in Paraguayan Spanish: Insights from Code-Mixing Typology

ERIC Educational Resources Information Center

Estigarribia, Bruno

2017-01-01

In this paper we examine the use of Guarani affixes and clitics in colloquial Paraguayan Spanish. We depart from the traditional view of these as "borrowings," and instead explore the idea that these phenomena can be integrated within Muysken's (2000, 2013, 2014) typology of code-mixing. We claim that most of these uses may stem from a…

Methods That Matter: Integrating Mixed Methods for More Effective Social Science Research

ERIC Educational Resources Information Center

Hay, M. Cameron, Ed.

2016-01-01

To do research that really makes a difference--the authors of this book argue--social scientists need questions and methods that reflect the complexity of the world. Bringing together a consortium of voices across a variety of fields, "Methods that Matter" offers compelling and successful examples of mixed methods research that do just…

How and Why Digital Generation Teachers Use Technology in the Classroom: An Explanatory Sequential Mixed Methods Study

ERIC Educational Resources Information Center

Li, Lan; Worch, Eric; Zhou, YuChun; Aguiton, Rhonda

2015-01-01

While teachers' conservative attitude toward technology has been identified as a barrier to effective technology integration in classrooms, it is often optimistically assumed that this issue will resolve when the digital generation enters the teaching profession (Morris, 2012). Using a mixed methodology approach, this study aimed to examine the…

Navigating Access and Maintaining Established Practice: Social Studies Teachers' Technology Integration at Three Florida Middle Schools

ERIC Educational Resources Information Center

Sheffield, Caroline

2011-01-01

This mixed methods multiple case study explored middle school social studies teachers' instructional use of digital technology at three suburban middle schools This mixed methods, multiple-case study explored middle school social studies teachers' instructional use of digital technology at three suburban middle schools in a large Florida school…

A Perspective on Third-Party Providers and Study Tour Programs: A Mixed Method Study

ERIC Educational Resources Information Center

Hains-Wesson, Rachael; Appleby, Mary

2017-01-01

This article presents an evaluation research outcome that used a mixed method approach. The study evaluated a short-term, study tour unit that was offered as an elective, credit-bearing, work-integrated learning experience for second year undergraduate students at Swinburne University of Technology, Melbourne, Australia. The unit of study offered…

Cultural Consensus and Cultural Diversity: A Mixed Methods Investigation of Human Service Providers' Models of Domestic Violence

ERIC Educational Resources Information Center

Collins, Cyleste C.; Dressler, William W.

2008-01-01

This study uses mixed methods and theory from cognitive anthropology to examine the cultural models of domestic violence among domestic violence agency workers, welfare workers, nurses, and a general population comparison group. Data collection and analysis uses quantitative and qualitative techniques, and the findings are integrated for…

Transcending the Quantitative-Qualitative Divide with Mixed Methods Research: A Multidimensional Framework for Understanding Congruence and Completeness in the Study of Values

ERIC Educational Resources Information Center

McLafferty, Charles L., Jr.; Slate, John R.; Onwuegbuzie, Anthony J.

2010-01-01

Quantitative research dominates published literature in the helping professions. Mixed methods research, which integrates quantitative and qualitative methodologies, has received a lukewarm reception. The authors address the iterative separation that infuses theory, praxis, philosophy, methodology, training, and public perception and propose a…

A Mixed Methods Survey Research Study of Novice Special Education Teachers: Investigation of Reading Preparedness

ERIC Educational Resources Information Center

Stratton, Mary P.

2017-01-01

Novice special education teachers have become an integral part of the public and private school systems throughout Pennsylvania. This mixed-methods research study explored the expertise and preparedness of current novice special education teachers. A combination of an electronic survey questionnaire and phone and face-to-face interviews were…

Remote sensing and GIS based information system for sustainable resources planning at Panchayat level

NASA Astrophysics Data System (ADS)

Velmurugan, A.; Bhatt, S.; Dadhwal, V. K.

2006-12-01

Spatial databases of natural resources are very much essential to ensure enhanced productivity by conserving soil and water and to maintain ecological integrity of any region. Integration of various thematic layers prepared from high resolution data and detailed field survey would be preferred for grass root level planning (Panchayat) aimed to realize the potential of production system on a sustained basis. In this study, a detailed spatial data base was created for part of Kasaragod dist., Kerala, India. Detailed soil survey was carried out using cadastral map and registered over high resolution satellite data (IRS LISS-IV) which helped to identify problems and potentials of the area. Nearly 600 ha of land were found to be at higher erosion risk category out of ten soil series identified in the study area. Remote sensing data was used to prepare land use/land cover map and coconut (53%) followed by mixed vegetation type (16%) were found to be dominant. Soil site suitability assessment for major crops of the area was carried out and crossed with present land use to get the mismatch in land use/land utilization type. Alternate land use plan was prepared considering the potentials and problems of various available resources. Decision Support System (DSS) along with user interface is developed to support decision and extract relevant information. As organic carbon is one of the most important indicators of soil fertility C stock in the present and proposed land use was also estimated to understand the environmental significance.

Phosphorus Import Dependency and Recycling Potential in the Global Phosphorus Mosaic

NASA Astrophysics Data System (ADS)

Powers, S. M.

2017-12-01

Nations differ widely in terms of recent P consumption trends and fertilizer trade dependencies, reflecting dynamic and globally uneven P fertilizer production, consumption, export, and import. Recovered P from urban and agricultural wastes can provide renewable sources that supplant the need to import P fertilizer, but to date, research on P recycling potential has been highly spatially segregated. Understanding of the global distribution of P recycling potential and options, and how these intersect with P import dependencies, could be used to guide long-term, spatially-prioritized planning for P, food, and water security. We integrated recent data on national P fertilizer flows, subnational P use, and landscape features within a global grid to understand how these constraints on future options for P use are distributed worldwide. This analysis illustrates several regions where combinations of high population density, cropland extent, and manure P production provide islands of opportunity for P recycling in mixed crop-livestock and populous agricultural areas. At the same time, nations with lower import ratios (net P import:consumption) contained a disproportionately large share of manure-rich croplands and populous croplands. As a further demonstration of the kinds of integrated comparisons that are possible using global land use data sets in combination with P, worldwide similarities and distinctions for P emerged from a cluster analysis. These kinds of socioeconomic-geographic patterns may foretell distinct P futures as societies address spatially uneven options for P, food, and water security.

Understanding Faculty Perceptions and Approaches to Academic Integrity in a Canadian School of Education

ERIC Educational Resources Information Center

Eaton, Sarah Elaine; Rothschuh, Stefan; Fernández Conde, Cristina; Guglielmin, Melanie; Otoo, Benedict Kojo; Wilson, Jenny; Burns, Ian

2018-01-01

Schools of education are in a unique position to foster a culture of academic integrity among pre-service teachers who will go on to careers as K-12 educators. This presentation presents the results of a year-long mixed methods study to understand the perceptions and approaches to academic integrity taken by academic staff in a Canadian school of…

Emission & Generation Resource Integrated Database (eGRID)

EPA Pesticide Factsheets

The Emissions & Generation Resource Integrated Database (eGRID) is an integrated source of data on environmental characteristics of electric power generation. Twelve federal databases are represented by eGRID, which provides air emission and resource mix information for thousands of power plants and generating companies. eGRID allows direct comparison of the environmental attributes of electricity from different plants, companies, States, or regions of the power grid.

Passive Microfluidic device for Sub Millisecond Mixing

PubMed Central

McMahon, Jay; Mohamed, Hisham; Barnard, David; Shaikh, Tanvir R.; Mannella, Carmen A.; Wagenknecht, Terence; Lu, Toh-Ming

2009-01-01

We report the investigation of a novel microfluidic mixing device to achieve submillisecond mixing. The micromixer combines two fluid streams of several microliters per second into a mixing compartment integrated with two T- type premixers and 4 butterfly-shaped in-channel mixing elements. We have employed three dimensional fluidic simulations to evaluate the mixing efficiency, and have constructed physical devices utilizing conventional microfabrication techniques. The simulation indicated thorough mixing at flow rate as low as 6 µL/s. The corresponding mean residence time is 0.44 ms for 90% of the particles simulated, or 0.49 ms for 95% of the particles simulated, respectively. The mixing efficiency of the physical device was also evaluated using fluorescein dye solutions and FluoSphere-red nanoparticles suspensions. The constructed micromixers achieved thorough mixing at the same flow rate of 6 µL/s, with the mixing indices of 96% ± 1%, and 98% ± 1% for the dye and the nanoparticle, respectively. The experimental results are consistent with the simulation data. The device demonstrated promising capabilities for time resolved studies for macromolecular dynamics of biological macromolecules. PMID:20161619

Quantification of mixing in vesicle suspensions using numerical simulations in two dimensions.

PubMed

Kabacaoğlu, G; Quaife, B; Biros, G

2017-02-01

We study mixing in Stokesian vesicle suspensions in two dimensions on a cylindrical Couette apparatus using numerical simulations. The vesicle flow simulation is done using a boundary integral method, and the advection-diffusion equation for the mixing of the solute is solved using a pseudo-spectral scheme. We study the effect of the area fraction, the viscosity contrast between the inside (the vesicles) and the outside (the bulk) fluid, the initial condition of the solute, and the mixing metric. We compare mixing in the suspension with mixing in the Couette apparatus without vesicles. On the one hand, the presence of vesicles in most cases slightly suppresses mixing. This is because the solute can be only diffused across the vesicle interface and not advected. On the other hand, there exist spatial distributions of the solute for which the unperturbed Couette flow completely fails to mix whereas the presence of vesicles enables mixing. We derive a simple condition that relates the velocity and solute and can be used to characterize the cases in which the presence of vesicles promotes mixing.

Quantification of mixing in vesicle suspensions using numerical simulations in two dimensions

PubMed Central

Quaife, B.; Biros, G.

2017-01-01

We study mixing in Stokesian vesicle suspensions in two dimensions on a cylindrical Couette apparatus using numerical simulations. The vesicle flow simulation is done using a boundary integral method, and the advection-diffusion equation for the mixing of the solute is solved using a pseudo-spectral scheme. We study the effect of the area fraction, the viscosity contrast between the inside (the vesicles) and the outside (the bulk) fluid, the initial condition of the solute, and the mixing metric. We compare mixing in the suspension with mixing in the Couette apparatus without vesicles. On the one hand, the presence of vesicles in most cases slightly suppresses mixing. This is because the solute can be only diffused across the vesicle interface and not advected. On the other hand, there exist spatial distributions of the solute for which the unperturbed Couette flow completely fails to mix whereas the presence of vesicles enables mixing. We derive a simple condition that relates the velocity and solute and can be used to characterize the cases in which the presence of vesicles promotes mixing. PMID:28344432

Developing a Planting Medium from Solid Waste Compost and Construction and Demolition Rubble for Use in Quarry Rehabilitation

NASA Astrophysics Data System (ADS)

Assaf, E. A.

2015-12-01

The combination of construction, demolition and excavation (CDE) waste along with the increase in solid waste generation has put a major stress on Lebanon and on the management of its solid waste. Compounding this problem are the issues of quarries closure and rehabilitation and a decrease in forest and vegetative cover. This research aims to provide an integrated solution to the stated problem by developing a "soil mix" derived from a mélange of the organic matter of the solid waste (compost), the CDE waste, and soil. Excavation and construction debris were ground to several sizes and mixed with compost and soil at different ratios. Replicates of these mixes and a set of control (regular soil) were used. In this mix, native and indicator plants are planted (in pots). The plant species used are Mathiolla crassifolia and Zea mays (Corn). Results have shown successful growth of both corn and Mathiolla seedlings in the mixes with higher amounts of construction rubble and compost i.e. Rubble: Soil: Compost Ratio of 2:1:1 and 1:0:1. However treatments with no compost and with less quantities of rubble demonstrated the inability of the soil used to sustain plant growth alone (1:1:1 and 1:1:0). Last but not least, the control consisting of soil only ended up being the weakest mix with yellow corn leaves and small Mathiolla seedlings fifty days after planting and fertilizing. Additionally, soil analysis, rubble and compost analysis were conducted. The samples were tested for heavy metals, nutrient availability and values of pH and EC. No contamination has been reported and an abundance of macronutrients and micronutrients was documented for the soil and compost. High alkalinity is due to the presence of concrete and the high percentage of Calcium Carbonate in Lebanese soils. Accordingly, the most adequate mixes for planting are treatments A (2:1:1) and B (1:0:1) and they should be pursued for a pilot scale study to test their potential use in quarry rehabilitation and eventually urban agriculture.

A particle tracking method for analyzing chaotic electroosmotic flow mixing in 3D microchannels with patterned charged surfaces

NASA Astrophysics Data System (ADS)

Chang, Chih-Chang; Yang, Ruey-Jen

2006-08-01

This paper presents a numerical simulation investigation into electroosmotic flow mixing in three-dimensional microchannels with patterned non-uniform surface zeta potentials. Three types of micromixers are investigated, namely a straight diagonal strip mixer (i.e. the non-uniform surface zeta potential is applied along straight, diagonal strips on the lower wall of the mixing channel), a staggered asymmetric herringbone strip mixer and a straight diagonal/symmetric herringbone strip mixer. A particle tracing algorithm is used to visualize and evaluate the mixing performance of the various mixers. The particle trajectories and Poincaré maps of the various mixers are calculated from the three-dimensional flow fields. The surface charge patterns on the lower walls of the microchannels induce electroosmotic chaotic advection in the low Reynolds number flow regime, and hence enhance the passive mixing effect in the microfluidic devices. A quantitative measure of the mixing performance based on Shannon entropy is employed to quantify the mixing of two miscible fluids. The results show that the mixing efficiency increases as the magnitude of the heterogeneous zeta potential ratio (|ζR|) is increased, but decreases as the aspect ratio (H/W) is increased. The mixing efficiency of the straight diagonal strip mixer with a length ratio of l/W = 0.5 is slightly higher than that obtained from the same mixer with l/W = 1.0. Finally, the staggered asymmetric herringbone strip mixer with θ = 45°, ζR = -1, l/W = 0.5 and H/W = 0.2 provides the optimal mixing performance of all the mixers presented in this study.

Blending in with the crowd: social parasites integrate into their host colonies using a flexible chemical signature.

PubMed Central

D'Ettorre, P; Mondy, N; Lenoir, A; Errard, C

2002-01-01

Social parasites are able to exploit their host's communication code and achieve social integration. For colony foundation, a newly mated slave-making ant queen must usurp a host colony. The parasite's brood is cared for by the hosts and newly eclosed slave-making workers integrate to form a mixed ant colony. To elucidate the social integration strategy of the slave-making workers, Polyergus rufescens, behavioural and chemical analyses were carried out. Cocoons of P. rufescens were introduced into subcolonies of four potential host species: Formica subgenus Serviformica (Formica cunicularia and F. rufibarbis, usual host species; F. gagates, rare host; F. selysi, non-natural host). Slave-making broods were cared for and newly emerged workers showed several social interactions with adult Formica. We recorded the occurrence of abdominal trophallaxis, in which P. rufescens, the parasite, was the donor. Social integration of P. rufescens workers into host colonies appears to rely on the ability of the parasite to modify its cuticular hydrocarbon profile to match that of the rearing species. To study the specific P. rufescens chemical profile, newly emerged callows were reared in isolation from the mother colony (without any contact with adult ants). The isolated P. rufescens workers exhibited a chemical profile closely matching that of the primary host species, indicating the occurrence of local host adaptation in the slave-maker population. However, the high flexibility in the ontogeny of the parasite's chemical signature could allow for host switching. PMID:12350253

The role of ice nuclei recycling in the maintenance of cloud ice in Arctic mixed-phase stratocumulus

DOE PAGES

Solomon, Amy; Feingold, G.; Shupe, M. D.

2015-09-25

This study investigates the maintenance of cloud ice production in Arctic mixed-phase stratocumulus in large eddy simulations that include a prognostic ice nuclei (IN) formulation and a diurnal cycle. Balances derived from a mixed-layer model and phase analyses are used to provide insight into buffering mechanisms that maintain ice in these cloud systems. We find that, for the case under investigation, IN recycling through subcloud sublimation considerably prolongs ice production over a multi-day integration. This effective source of IN to the cloud dominates over mixing sources from above or below the cloud-driven mixed layer. Competing feedbacks between dynamical mixing andmore » recycling are found to slow the rate of ice lost from the mixed layer when a diurnal cycle is simulated. Furthermore, the results of this study have important implications for maintaining phase partitioning of cloud ice and liquid that determine the radiative forcing of Arctic mixed-phase clouds.« less

The role of ice nuclei recycling in the maintenance of cloud ice in Arctic mixed-phase stratocumulus

DOE Office of Scientific and Technical Information (OSTI.GOV)

Solomon, Amy; Feingold, G.; Shupe, M. D.

This study investigates the maintenance of cloud ice production in Arctic mixed-phase stratocumulus in large eddy simulations that include a prognostic ice nuclei (IN) formulation and a diurnal cycle. Balances derived from a mixed-layer model and phase analyses are used to provide insight into buffering mechanisms that maintain ice in these cloud systems. We find that, for the case under investigation, IN recycling through subcloud sublimation considerably prolongs ice production over a multi-day integration. This effective source of IN to the cloud dominates over mixing sources from above or below the cloud-driven mixed layer. Competing feedbacks between dynamical mixing andmore » recycling are found to slow the rate of ice lost from the mixed layer when a diurnal cycle is simulated. Furthermore, the results of this study have important implications for maintaining phase partitioning of cloud ice and liquid that determine the radiative forcing of Arctic mixed-phase clouds.« less

National Conference on Integrated Resource Planning: Proceedings

NASA Astrophysics Data System (ADS)

Until recently, state regulators have focused most of their attention on the development of least-cost or integrated resource planning (IRP) processes for electric utilities. A number of commissions are beginning to scrutinize the planning processes of local gas distribution companies (LDCs) because of the increased control that LDCs have over their purchased gas costs (as well as the associated risks) and because of questions surrounding the role and potential of gas end-use efficiency options. Traditionally, resource planning (LDCs) has concentrated on options for purchasing and storing gas. Integrated resource planning involves the creation of a process in which supply-side and demand-side options are integrated to create a resource mix that reliably satisfies customers' short-term and long-term energy service needs at the lowest cost. As applied to gas utilities, an integrated resource plan seeks to balance cost and reliability, and should not be interpreted simply as the search for lowest commodity costs. The National Association of Regulatory Utility Commissioners' (NARUC) Energy Conservation committee asked Lawrence Berkeley Laboratory (LBL) to survey state PUCs to determine the extent to which they have undertaken least cost planning for gas utilities. The survey included the following topics: status of state PUC least-cost planning regulations and practices for gas utilities; type and scope of natural gas DSM programs in effect, including fuel substitution; economic tests and analysis methods used to evaluate DSM programs; relationship between prudency reviews of gas utility purchasing practices and integrated resource planning; and key regulatory issues facing gas utilities during the next five years.

Matter-induced charge-symmetry-violating NN potential

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biswas, Subhrajyoti; Roy, Pradip; Dutt-Mazumder, Abhee K.

2010-01-15

We construct a density-dependent, Class III, charge-symmetry-violating (CSV) potential due to mixing of the {rho}-{omega} meson with off-shell corrections. Here, in addition to the usual vacuum contribution, the matter-induced mixing of {rho}-{omega} is also included. It is observed that the contribution of the density-dependent CSV potential is comparable to that of the vacuum contribution.

Mix It Up

ERIC Educational Resources Information Center

Vasquez-Mireles, Selina; West, Sandra

2007-01-01

A correlated science lesson is characterized as an integrated science lesson in that it may incorporate traditionally integrated activities and use math as a tool. However, a correlated math-science lesson also: (1) has the pertinent math and science objectives aligned with state standards; and (2) teaches parallel science and math ideas equally.…

Professional Development for International Teachers: Examining TPACK and Technology Integration Decision Making

ERIC Educational Resources Information Center

Dalal, Medha; Archambault, Leanna; Shelton, Catharyn

2017-01-01

This mixed-methods study explored the impacts of a semester-long technology professional development for secondary school international teachers from developing nations around the world. We used (a) a survey approach to examine international teachers' perceived technology integration abilities using the technological pedagogical content knowledge…

Cultivating the Academic Integrity of Urban Adolescents with Ethical Philosophy Programming

ERIC Educational Resources Information Center

Seider, Scott; Novick, Sarah; Gomez, Jessica

2013-01-01

This mixed-methods study considered the effects of ethical philosophy programming at a high-performing, high-poverty urban high school upon the academic integrity of participating adolescents ("n" = 279). Analyses of pre-post survey data revealed that participating adolescents reported significantly higher levels of academic integrity…

Potentials of Mean Force With Ab Initio Mixed Hamiltonian Models of Solvation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dupuis, Michel; Schenter, Gregory K.; Garrett, Bruce C.

2003-08-01

We give an account of a computationally tractable and efficient procedure for the calculation of potentials of mean force using mixed Hamiltonian models of electronic structure where quantum subsystems are described with computationally intensive ab initio wavefunctions. The mixed Hamiltonian is mapped into an all-classical Hamiltonian that is amenable to a thermodynamic perturbation treatment for the calculation of free energies. A small number of statistically uncorrelated (solute-solvent) configurations are selected from the Monte Carlo random walk generated with the all-classical Hamiltonian approximation. Those are used in the averaging of the free energy using the mixed quantum/classical Hamiltonian. The methodology ismore » illustrated for the micro-solvated SN2 substitution reaction of methyl chloride by hydroxide. We also compare the potential of mean force calculated with the above protocol with an approximate formalism, one in which the potential of mean force calculated with the all-classical Hamiltonian is simply added to the energy of the isolated (non-solvated) solute along the reaction path. Interestingly the latter approach is found to be in semi-quantitative agreement with the full mixed Hamiltonian approximation.« less

Optimizing integrated airport surface and terminal airspace operations under uncertainty

NASA Astrophysics Data System (ADS)

Bosson, Christabelle S.

In airports and surrounding terminal airspaces, the integration of surface, arrival and departure scheduling and routing have the potential to improve the operations efficiency. Moreover, because both the airport surface and the terminal airspace are often altered by random perturbations, the consideration of uncertainty in flight schedules is crucial to improve the design of robust flight schedules. Previous research mainly focused on independently solving arrival scheduling problems, departure scheduling problems and surface management scheduling problems and most of the developed models are deterministic. This dissertation presents an alternate method to model the integrated operations by using a machine job-shop scheduling formulation. A multistage stochastic programming approach is chosen to formulate the problem in the presence of uncertainty and candidate solutions are obtained by solving sample average approximation problems with finite sample size. The developed mixed-integer-linear-programming algorithm-based scheduler is capable of computing optimal aircraft schedules and routings that reflect the integration of air and ground operations. The assembled methodology is applied to a Los Angeles case study. To show the benefits of integrated operations over First-Come-First-Served, a preliminary proof-of-concept is conducted for a set of fourteen aircraft evolving under deterministic conditions in a model of the Los Angeles International Airport surface and surrounding terminal areas. Using historical data, a representative 30-minute traffic schedule and aircraft mix scenario is constructed. The results of the Los Angeles application show that the integration of air and ground operations and the use of a time-based separation strategy enable both significant surface and air time savings. The solution computed by the optimization provides a more efficient routing and scheduling than the First-Come-First-Served solution. Additionally, a data driven analysis is performed for the Los Angeles environment and probabilistic distributions of pertinent uncertainty sources are obtained. A sensitivity analysis is then carried out to assess the methodology performance and find optimal sampling parameters. Finally, simulations of increasing traffic density in the presence of uncertainty are conducted first for integrated arrivals and departures, then for integrated surface and air operations. To compare the optimization results and show the benefits of integrated operations, two aircraft separation methods are implemented that offer different routing options. The simulations of integrated air operations and the simulations of integrated air and surface operations demonstrate that significant traveling time savings, both total and individual surface and air times, can be obtained when more direct routes are allowed to be traveled even in the presence of uncertainty. The resulting routings induce however extra take off delay for departing flights. As a consequence, some flights cannot meet their initial assigned runway slot which engenders runway position shifting when comparing resulting runway sequences computed under both deterministic and stochastic conditions. The optimization is able to compute an optimal runway schedule that represents an optimal balance between total schedule delays and total travel times.

Mechanical and morphological study of linear low density polyethylene (LLDPE)/cyperus odoratus (CY) biocomposites

NASA Astrophysics Data System (ADS)

Faris, N. A.; Noriman, N. Z.; Haron, Adli; Sam, S. T.; Hamzah, R.; Shayfull, Z.; Ghazali, M. F.

2017-09-01

The potential of Cyperus Odoratus (CY) as a filler was studied. The CY, in a powder form, was mixed with Linear Low Density Polyethylene (LLDPE), prior to being fed into a twin screw extruder and subsequently into an injection moulding machine to produce LLDPY/CY biocomposites. The Scanning Electron Microscope (SEM) was utilized and tensile tests were performed on the test specimens to characterize the structure and properties of the composites. The integration of CY powder and LLDPE resulted in an increment of the modulus of elasticity, but a reduction in tensile strength and elongation at break. The morphology characterization of these composites, determined through the SEM, showed poor interfacial adhesion between the filler and the thermoplastic LLDPE matrix.

Virtual patients in a real clinical context using augmented reality: impact on antibiotics prescription behaviors.

PubMed

Nifakos, Sokratis; Zary, Nabil

2014-01-01

The research community has called for the development of effective educational interventions for addressing prescription behaviour since antimicrobial resistance remains a global health issue. Examining the potential to displace the educational process from Personal Computers to Mobile devices, in this paper we investigated a new method of integration of Virtual Patients into Mobile devices with augmented reality technology, enriching the practitioner's education in prescription behavior. Moreover, we also explored which information are critical during the prescription behavior education and we visualized these information on real context with augmented reality technology, simultaneously with a running Virtual Patient's scenario. Following this process, we set the educational frame of experiential knowledge to a mixed (virtual and real) environment.

Polymeric cantilever integrated with PDMS/graphene composite strain sensor.

PubMed

Choi, Young-Soo; Gwak, Min-Joo; Lee, Dong-Weon

2016-10-01

This paper describes the mechanical and electrical characteristics of a polydimethylsiloxane (PDMS) cantilever integrated with a high-sensitivity strain sensor. The strain sensor is fabricated using PDMS and graphene flakes that are uniformly distributed in the PDMS. In order to prepare PDMS/graphene composite with uniform resistance, a tetrahydrofuran solution is used to decrease the viscosity of a PDMS base polymer solution. A horn-type sonicator is then used to mix the base polymer with graphene flakes. Low viscosity of the base polymer solution improves the reliability and reproducibility of the PDMS/graphene composite for strain sensor applications. After dicing the composite into the desired sensor shape, a tensile test is performed. The experimental results show that the composite with a concentration of 30 wt.% exhibits a linear response up to a strain rate of 9%. The graphene concentration of the prepared materials affects the gauge factor, which at 20% graphene concentration reaches about 50, and with increasing graphene concentration to 30% decreases to 9. Furthermore, photolithography, PDMS casting, and a stencil process are used to fabricate a PDMS cantilever with an integrated strain sensor. The change in resistance of the integrated PDMS/graphene sensor is characterized with respect to the displacement of the cantilever of within 500 μm. The experimental results confirmed that the prepared PDMS/graphene based sensor has the potential for high-sensitive biosensor applications.

Informing mental health policies and services in the EMR: cost-effective deployment of human resources to deliver integrated community-based care.

PubMed

Ivbijaro, G; Patel, V; Chisholm, D; Goldberg, D; Khoja, T A M; Edwards, T M; Enum, Y; Kolkiewic, L A

2015-09-28

For EMR countries to deliver the expectations of the Global Mental Health Action Plan 2013-2020 & the ongoing move towards universal health coverage, all health & social care providers need to innovate and transform their services to provide evidence-based health care that is accessible, cost-effective & with the best patient outcomes. For the primary and community workforce, this includes general medical practitioners, practice & community nurses, community social workers, housing officers, lay health workers, nongovernmental organizations & civil society, including community spiritual leaders/healers. This paper brings together the current best evidence to support transformation & discusses key approaches to achieve this, including skill mix and/or task shifting and integrated care. The important factors that need to be in place to support skill mix/task shifting and good integrated care are outlined with reference to EMR countries.

Microfluidic magnetic fluidized bed for DNA analysis in continuous flow mode.

PubMed

Hernández-Neuta, Iván; Pereiro, Iago; Ahlford, Annika; Ferraro, Davide; Zhang, Qiongdi; Viovy, Jean-Louis; Descroix, Stéphanie; Nilsson, Mats

2018-04-15

Magnetic solid phase substrates for biomolecule manipulation have become a valuable tool for simplification and automation of molecular biology protocols. However, the handling of magnetic particles inside microfluidic chips for miniaturized assays is often challenging due to inefficient mixing, aggregation, and the advanced instrumentation required for effective actuation. Here, we describe the use of a microfluidic magnetic fluidized bed approach that enables dynamic, highly efficient and simplified magnetic bead actuation for DNA analysis in a continuous flow platform with minimal technical requirements. We evaluate the performance of this approach by testing the efficiency of individual steps of a DNA assay based on padlock probes and rolling circle amplification. This assay comprises common nucleic acid analysis principles, such as hybridization, ligation, amplification and restriction digestion. We obtained efficiencies of up to 90% for these reactions with high throughput processing up to 120μL of DNA dilution at flow rates ranging from 1 to 5μL/min without compromising performance. The fluidized bed was 20-50% more efficient than a commercially available solution for microfluidic manipulation of magnetic beads. Moreover, to demonstrate the potential of this approach for integration into micro-total analysis systems, we optimized the production of a low-cost polymer based microarray and tested its analytical performance for integrated single-molecule digital read-out. Finally, we provide the proof-of-concept for a single-chamber microfluidic chip that combines the fluidized bed with the polymer microarray for a highly simplified and integrated magnetic bead-based DNA analyzer, with potential applications in diagnostics. Copyright © 2017 Elsevier B.V. All rights reserved.

Establishing a Culture of Learning: A Mixed Methodology Exploration regarding the Phases of Change for Professional Learning Communities and Literacy Strategies

ERIC Educational Resources Information Center

Gray, James E.

2010-01-01

This research serves as a mixed methodological study that presents a conceptual framework which focuses on the relationship between professional learning communities, high yield literacy strategies, and their phases of change. As a result, the purpose of this study is threefold. First, a conceptual framework integrating professional learning…

Mixed-Method Research on Learning Vocabulary through Technology Reveals Vocabulary Growth in Second-Grade Students

ERIC Educational Resources Information Center

Huang, SuHua

2015-01-01

A mixed-method embedded research design was employed to investigate the effectiveness of the integration of technology for second-grade students' vocabulary development and learning. Two second-grade classes with a total of 40 students (21 boys and 19 girls) were randomly selected to participate in this study for the course of a semester. One…

"Vogue," 1892-1928: An Historical Look at the Evolution of One Magazine's Editorial-Advertising-Design Mix.

ERIC Educational Resources Information Center

Prior, Marcia R.

The careful integration of editorial content, graphic design, and advertising to create a successful magazine package is not a phenomenon of the last half of the twentieth century. As early as the 1890s, the first publishers of "Vogue" magazine had established an editorial-advertising-design mix in the fashion magazine that was…

Integrated microfluidic chip for rapid DNA digestion and time-resolved capillary electrophoresis analysis

PubMed Central

Lin, Che-Hsin; Wang, Yao-Nan; Fu, Lung-Ming

2012-01-01

An integrated microfluidic chip is proposed for rapid DNA digestion and time-resolved capillary electrophoresis (CE) analysis. The chip comprises two gel-filled chambers for DNA enrichment and purification, respectively, a T-form micromixer for DNA/restriction enzyme mixing, a serpentine channel for DNA digestion reaction, and a CE channel for on-line capillary electrophoresis analysis. The DNA and restriction enzyme are mixed electroomostically using a pinched-switching DC field. The experimental and numerical results show that a mixing performance of 97% is achieved within a distance of 1 mm from the T-junction when a driving voltage of 90 V/cm and a switching frequency of 4 Hz are applied. Successive mixing digestion and capillary electrophoresis operation clearly present the changes on digesting φx-174 DNA in different CE runs. The time-resolved electropherograms show that the proposed device enables a φx-174 DNA sample comprising 11 fragments to be concentrated and analyzed within 24 min. Overall, the results presented in this study show that the proposed microfluidic chip provides a rapid and effective tool for DNA digestion and CE analysis applications. PMID:22662085

Exploring the bases for a mixed reality stroke rehabilitation system, Part I: A unified approach for representing action, quantitative evaluation, and interactive feedback

PubMed Central

2011-01-01

Background Although principles based in motor learning, rehabilitation, and human-computer interfaces can guide the design of effective interactive systems for rehabilitation, a unified approach that connects these key principles into an integrated design, and can form a methodology that can be generalized to interactive stroke rehabilitation, is presently unavailable. Results This paper integrates phenomenological approaches to interaction and embodied knowledge with rehabilitation practices and theories to achieve the basis for a methodology that can support effective adaptive, interactive rehabilitation. Our resulting methodology provides guidelines for the development of an action representation, quantification of action, and the design of interactive feedback. As Part I of a two-part series, this paper presents key principles of the unified approach. Part II then describes the application of this approach within the implementation of the Adaptive Mixed Reality Rehabilitation (AMRR) system for stroke rehabilitation. Conclusions The accompanying principles for composing novel mixed reality environments for stroke rehabilitation can advance the design and implementation of effective mixed reality systems for the clinical setting, and ultimately be adapted for home-based application. They furthermore can be applied to other rehabilitation needs beyond stroke. PMID:21875441

The Study on Financial Supervision for Chinese Financial Industry under Mixed Operation

NASA Astrophysics Data System (ADS)

Wei, Song

Financial mixed operation refers to that financial institution can offer all financial services (banking, securities, insurance, and trust) and engage in industrial businesses by holding the share ownership. Because of self interests, risk diversification, the change of competition condition, and clients' needs of the diversity of financial products and services, commercial banks make it possible for the mixed operation to be the optimal choice of the banking businesses under dynamic conditions in globalized competition, which results in the diversity and integration of banking businesses.

(Re)Integration of mental patients - mixed media messages.

PubMed

Jukić, Vlado

2008-09-01

It can be said that (re)integration of mental patients is the basic goal of psychiatry as a medical discipline. Throughout the history of psychiatry different approaches to treatment and rehabilitation of mental patients and their social (re)integration have been identified and monitored. There have always existed different impediments to the (re)integration of mental patients, as a manifestation of the times when treatment and rehabilitation took place. In the beginning of psychiatric development, the principal goal, in line with the social development and social awareness of human rights, was to isolate the patient away from his/her social environment and place him/her into a psychiatric hospital, preferably for life. Lately, as fighting for human rights grew into a matter of fashion and prestige rather than an ethical and legal issue, the media have often spoken about the human rights of mental patients and, explicitly or implicitly, advocated their social (re)integration. This cry for human rights of mental patients has virtually rooted out the advocates for permanent social isolation, even in this region. However, the Croatian media often give out the so called mixed messages when it comes to treating mental patients. This article analyzes such contradictory communication and attempts to offer certain solutions.

A molecular dynamics study of the role of pressure on the response of reactive materials to thermal initiation

NASA Astrophysics Data System (ADS)

Weingarten, N. Scott; Mattson, William D.; Yau, Anthony D.; Weihs, Timothy P.; Rice, Betsy M.

2010-05-01

To elucidate the mechanisms of energy release in a reacting nickel/aluminum bilayer, we simulate the exothermic alloying reactions using both microcanonical and isoenthalpic-isobaric molecular dynamics simulations and an embedded-atom method type potential. The mechanism of the mixing consists of a sequence of steps in which mixing and reaction first occurs at the interface; the resulting heat generated from the mixing then melts the Al layer; subsequent mixing leads to further heat generation after which the Ni layer melts. The mixing continues until the alloying reactions are completed. The results indicate that pressure has a significant influence on the rates of atomic mixing and alloying reactions. Local pressures and temperatures within the individual layers at the time of melting are calculated, and these results are compared with the pressure-dependent melting curves determined for pure Al and pure Ni using this interaction potential.

Alpha and Beta Oscillations Index Semantic Congruency between Speech and Gestures in Clear and Degraded Speech.

PubMed

Drijvers, Linda; Özyürek, Asli; Jensen, Ole

2018-06-19

Previous work revealed that visual semantic information conveyed by gestures can enhance degraded speech comprehension, but the mechanisms underlying these integration processes under adverse listening conditions remain poorly understood. We used MEG to investigate how oscillatory dynamics support speech-gesture integration when integration load is manipulated by auditory (e.g., speech degradation) and visual semantic (e.g., gesture congruency) factors. Participants were presented with videos of an actress uttering an action verb in clear or degraded speech, accompanied by a matching (mixing gesture + "mixing") or mismatching (drinking gesture + "walking") gesture. In clear speech, alpha/beta power was more suppressed in the left inferior frontal gyrus and motor and visual cortices when integration load increased in response to mismatching versus matching gestures. In degraded speech, beta power was less suppressed over posterior STS and medial temporal lobe for mismatching compared with matching gestures, showing that integration load was lowest when speech was degraded and mismatching gestures could not be integrated and disambiguate the degraded signal. Our results thus provide novel insights on how low-frequency oscillatory modulations in different parts of the cortex support the semantic audiovisual integration of gestures in clear and degraded speech: When speech is clear, the left inferior frontal gyrus and motor and visual cortices engage because higher-level semantic information increases semantic integration load. When speech is degraded, posterior STS/middle temporal gyrus and medial temporal lobe are less engaged because integration load is lowest when visual semantic information does not aid lexical retrieval and speech and gestures cannot be integrated.

Cochrane Qualitative and Implementation Methods Group guidance series-paper 5: methods for integrating qualitative and implementation evidence within intervention effectiveness reviews.

PubMed

Harden, Angela; Thomas, James; Cargo, Margaret; Harris, Janet; Pantoja, Tomas; Flemming, Kate; Booth, Andrew; Garside, Ruth; Hannes, Karin; Noyes, Jane

2018-05-01

The Cochrane Qualitative and Implementation Methods Group develops and publishes guidance on the synthesis of qualitative and mixed-method evidence from process evaluations. Despite a proliferation of methods for the synthesis of qualitative research, less attention has focused on how to integrate these syntheses within intervention effectiveness reviews. In this article, we report updated guidance from the group on approaches, methods, and tools, which can be used to integrate the findings from quantitative studies evaluating intervention effectiveness with those from qualitative studies and process evaluations. We draw on conceptual analyses of mixed methods systematic review designs and the range of methods and tools that have been used in published reviews that have successfully integrated different types of evidence. We outline five key methods and tools as devices for integration which vary in terms of the levels at which integration takes place; the specialist skills and expertise required within the review team; and their appropriateness in the context of limited evidence. In situations where the requirement is the integration of qualitative and process evidence within intervention effectiveness reviews, we recommend the use of a sequential approach. Here, evidence from each tradition is synthesized separately using methods consistent with each tradition before integration takes place using a common framework. Reviews which integrate qualitative and process evaluation evidence alongside quantitative evidence on intervention effectiveness in a systematic way are rare. This guidance aims to support review teams to achieve integration and we encourage further development through reflection and formal testing. Copyright © 2017 Elsevier Inc. All rights reserved.

A New Expanded Mixed Element Method for Convection-Dominated Sobolev Equation

PubMed Central

Wang, Jinfeng; Li, Hong; Fang, Zhichao

2014-01-01

We propose and analyze a new expanded mixed element method, whose gradient belongs to the simple square integrable space instead of the classical H(div; Ω) space of Chen's expanded mixed element method. We study the new expanded mixed element method for convection-dominated Sobolev equation, prove the existence and uniqueness for finite element solution, and introduce a new expanded mixed projection. We derive the optimal a priori error estimates in L 2-norm for the scalar unknown u and a priori error estimates in (L 2)2-norm for its gradient λ and its flux σ. Moreover, we obtain the optimal a priori error estimates in H 1-norm for the scalar unknown u. Finally, we obtained some numerical results to illustrate efficiency of the new method. PMID:24701153

An integral transform approach for a mixed boundary problem involving a flowing partially penetrating well with infinitesimal well skin

NASA Astrophysics Data System (ADS)

Chang, Chien-Chieh; Chen, Chia-Shyun

2002-06-01

A flowing partially penetrating well with infinitesimal well skin is a mixed boundary because a Cauchy condition is prescribed along the screen length and a Neumann condition of no flux is stipulated over the remaining unscreened part. An analytical approach based on the integral transform technique is developed to determine the Laplace domain solution for such a mixed boundary problem in a confined aquifer of finite thickness. First, the mixed boundary is changed into a homogeneous Neumann boundary by substituting the Cauchy condition with a Neumann condition in terms of well bore flux that varies along the screen length and is time dependent. Despite the well bore flux being unknown a priori, the modified model containing this homogeneous Neumann boundary can be solved with the Laplace and the finite Fourier cosine transforms. To determine well bore flux, screen length is discretized into a finite number of segments, to which the Cauchy condition is reinstated. This reinstatement also restores the relation between the original model and the solutions obtained. For a given time, the numerical inversion of the Laplace domain solution yields the drawdown distributions, well bore flux, and the well discharge. This analytical approach provides an alternative for dealing with the mixed boundary problems, especially when aquifer thickness is assumed to be finite.

Thermodynamics of saline and fresh water mixing in estuaries

NASA Astrophysics Data System (ADS)

Zhang, Zhilin; Savenije, Hubert H. G.

2018-03-01

The mixing of saline and fresh water is a process of energy dissipation. The freshwater flow that enters an estuary from the river contains potential energy with respect to the saline ocean water. This potential energy is able to perform work. Looking from the ocean to the river, there is a gradual transition from saline to fresh water and an associated rise in the water level in accordance with the increase in potential energy. Alluvial estuaries are systems that are free to adjust dissipation processes to the energy sources that drive them, primarily the kinetic energy of the tide and the potential energy of the river flow and to a minor extent the energy in wind and waves. Mixing is the process that dissipates the potential energy of the fresh water. The maximum power (MP) concept assumes that this dissipation takes place at maximum power, whereby the different mixing mechanisms of the estuary jointly perform the work. In this paper, the power is maximized with respect to the dispersion coefficient that reflects the combined mixing processes. The resulting equation is an additional differential equation that can be solved in combination with the advection-dispersion equation, requiring only two boundary conditions for the salinity and the dispersion. The new equation has been confronted with 52 salinity distributions observed in 23 estuaries in different parts of the world and performs very well.

An experimental study of reactive turbulent mixing

NASA Technical Reports Server (NTRS)

Cooper, L. P.; Marek, C. J.; Strehlow, R. A.

1977-01-01

An experimental study of two coaxial gas streams, which react very rapidly, was performed to investigate the mixing characteristics of turbulent flow fields. The center stream consisted of a CO-N2 mixture and the outer annular stream consisted of air vitiated by H2 combustion. The streams were at equal velocity (50 m/sec) and temperature (1280 K). Turbulence measurements were obtained using hot film anemometry. A sampling probe was used to obtain time averaged gas compositions. Six different turbulence generators were placed in the annular passage to alter the flow field mixing characteristics. The turbulence generators affected the bulk mixing of the streams and the extent of CO conversion to different degrees. The effects can be related to the average eddy size (integral scale) and the bulk mixing. Higher extents of conversion of CO to CO2 were found be increasing the bulk mixing and decreasing the average eddy size.

Analysis and testing of high entrainment single nozzle jet pumps with variable mixing tubes

NASA Technical Reports Server (NTRS)

Hickman, K. E.; Hill, P. G.; Gilbert, G. B.

1972-01-01

An analytical model was developed to predict the performance characteristics of axisymmetric single-nozzle jet pumps with variable area mixing tubes. The primary flow may be subsonic or supersonic. The computer program uses integral techniques to calculate the velocity profiles and the wall static pressures that result from the mixing of the supersonic primary jet and the subsonic secondary flow. An experimental program was conducted to measure mixing tube wall static pressure variations, velocity profiles, and temperature profiles in a variable area mixing tube with a supersonic primary jet. Static pressure variations were measured at four different secondary flow rates. These test results were used to evaluate the analytical model. The analytical results compared well to the experimental data. Therefore, the analysis is believed to be ready for use to relate jet pump performance characteristics to mixing tube design.

Reactor Pressure Vessel Fracture Analysis Capabilities in Grizzly

DOE Office of Scientific and Technical Information (OSTI.GOV)

Spencer, Benjamin; Backman, Marie; Chakraborty, Pritam

2015-03-01

Efforts have been underway to develop fracture mechanics capabilities in the Grizzly code to enable it to be used to perform deterministic fracture assessments of degraded reactor pressure vessels (RPVs). Development in prior years has resulted a capability to calculate -integrals. For this application, these are used to calculate stress intensity factors for cracks to be used in deterministic linear elastic fracture mechanics (LEFM) assessments of fracture in degraded RPVs. The -integral can only be used to evaluate stress intensity factors for axis-aligned flaws because it can only be used to obtain the stress intensity factor for pure Mode Imore » loading. Off-axis flaws will be subjected to mixed-mode loading. For this reason, work has continued to expand the set of fracture mechanics capabilities to permit it to evaluate off-axis flaws. This report documents the following work to enhance Grizzly’s engineering fracture mechanics capabilities for RPVs: • Interaction Integral and -stress: To obtain mixed-mode stress intensity factors, a capability to evaluate interaction integrals for 2D or 3D flaws has been developed. A -stress evaluation capability has been developed to evaluate the constraint at crack tips in 2D or 3D. Initial verification testing of these capabilities is documented here. • Benchmarking for axis-aligned flaws: Grizzly’s capabilities to evaluate stress intensity factors for axis-aligned flaws have been benchmarked against calculations for the same conditions in FAVOR. • Off-axis flaw demonstration: The newly-developed interaction integral capabilities are demon- strated in an application to calculate the mixed-mode stress intensity factors for off-axis flaws. • Other code enhancements: Other enhancements to the thermomechanics capabilities that relate to the solution of the engineering RPV fracture problem are documented here.« less

Transpiration and root development of urban trees in structural soil stormwater reservoirs.

PubMed

Bartens, Julia; Day, Susan D; Harris, J Roger; Wynn, Theresa M; Dove, Joseph E

2009-10-01

Stormwater management that relies on ecosystem processes, such as tree canopy interception and rhizosphere biology, can be difficult to achieve in built environments because urban land is costly and urban soil inhospitable to vegetation. Yet such systems offer a potentially valuable tool for achieving both sustainable urban forests and stormwater management. We evaluated tree water uptake and root distribution in a novel stormwater mitigation facility that integrates trees directly into detention reservoirs under pavement. The system relies on structural soils: highly porous engineered mixes designed to support tree root growth and pavement. To evaluate tree performance under the peculiar conditions of such a stormwater detention reservoir (i.e., periodically inundated), we grew green ash (Fraxinus pennsylvanica Marsh.) and swamp white oak (Quercus bicolor Willd.) in either CUSoil or a Carolina Stalite-based mix subjected to three simulated below-system infiltration rates for two growing seasons. Infiltration rate affected both transpiration and rooting depth. In a factorial experiment with ash, rooting depth always increased with infiltration rate for Stalite, but this relation was less consistent for CUSoil. Slow-drainage rates reduced transpiration and restricted rooting depth for both species and soils, and trunk growth was restricted for oak, which grew the most in moderate infiltration. Transpiration rates under slow infiltration were 55% (oak) and 70% (ash) of the most rapidly transpiring treatment (moderate for oak and rapid for ash). We conclude this system is feasible and provides another tool to address runoff that integrates the function of urban green spaces with other urban needs.

pLARmEB: integration of least angle regression with empirical Bayes for multilocus genome-wide association studies.

PubMed

Zhang, J; Feng, J-Y; Ni, Y-L; Wen, Y-J; Niu, Y; Tamba, C L; Yue, C; Song, Q; Zhang, Y-M

2017-06-01

Multilocus genome-wide association studies (GWAS) have become the state-of-the-art procedure to identify quantitative trait nucleotides (QTNs) associated with complex traits. However, implementation of multilocus model in GWAS is still difficult. In this study, we integrated least angle regression with empirical Bayes to perform multilocus GWAS under polygenic background control. We used an algorithm of model transformation that whitened the covariance matrix of the polygenic matrix K and environmental noise. Markers on one chromosome were included simultaneously in a multilocus model and least angle regression was used to select the most potentially associated single-nucleotide polymorphisms (SNPs), whereas the markers on the other chromosomes were used to calculate kinship matrix as polygenic background control. The selected SNPs in multilocus model were further detected for their association with the trait by empirical Bayes and likelihood ratio test. We herein refer to this method as the pLARmEB (polygenic-background-control-based least angle regression plus empirical Bayes). Results from simulation studies showed that pLARmEB was more powerful in QTN detection and more accurate in QTN effect estimation, had less false positive rate and required less computing time than Bayesian hierarchical generalized linear model, efficient mixed model association (EMMA) and least angle regression plus empirical Bayes. pLARmEB, multilocus random-SNP-effect mixed linear model and fast multilocus random-SNP-effect EMMA methods had almost equal power of QTN detection in simulation experiments. However, only pLARmEB identified 48 previously reported genes for 7 flowering time-related traits in Arabidopsis thaliana.

Electrospray micromixer chip for on-line derivatization and kinetic studies.

PubMed

Abonnenc, Mélanie; Dayon, Loïc; Perruche, Brice; Lion, Niels; Girault, Hubert H

2008-05-01

An electrospray microchip for mass spectrometry comprising an integrated passive mixer to carry out on-chip chemical derivatizations is described. The microchip fabricated using UV-photoablation is composed of two microchannels linked together by a liquid junction. Downstream of this liquid junction, a mixing unit made of parallel oblique grooves is integrated to the microchannel in order to create flow perturbations. Several mixer designs are evaluated. The mixer efficiency is investigated both by fluorescence study and mass spectrometric monitoring of the tagging reaction of cysteinyl peptides with 1,4-benzoquinone. The comparisons with a microchip without a mixing unit and a kinetic model are used to assess the efficiency of the mixer showing tagging kinetics close to that of bulk reactions in an ideally mixed reactor. As an ultimate application, the electrospray micromixer is implemented in a LC-MS workflow. On-line derivatization of albumin tryptic peptides after a reversed-phase separation and counting of their cysteines drastically enhance the protein identification.

Mixed-Dimensionality VLSI-Type Configurable Tools for Virtual Prototyping of Biomicrofluidic Devices and Integrated Systems

NASA Astrophysics Data System (ADS)

Makhijani, Vinod B.; Przekwas, Andrzej J.

2002-10-01

This report presents results of a DARPA/MTO Composite CAD Project aimed to develop a comprehensive microsystem CAD environment, CFD-ACE+ Multiphysics, for bio and microfluidic devices and complete microsystems. The project began in July 1998, and was a three-year team effort between CFD Research Corporation, California Institute of Technology (CalTech), University of California, Berkeley (UCB), and Tanner Research, with Mr. Don Verlee from Abbott Labs participating as a consultant on the project. The overall objective of this project was to develop, validate and demonstrate several applications of a user-configurable VLSI-type mixed-dimensionality software tool for design of biomicrofluidics devices and integrated systems. The developed tool would provide high fidelity 3-D multiphysics modeling capability, l-D fluidic circuits modeling, and SPICE interface for system level simulations, and mixed-dimensionality design. It would combine tools for layouts and process fabrication, geometric modeling, and automated grid generation, and interfaces to EDA tools (e.g. Cadence) and MCAD tools (e.g. ProE).

Synchronization of generalized reaction-diffusion neural networks with time-varying delays based on general integral inequalities and sampled-data control approach.

PubMed

Dharani, S; Rakkiyappan, R; Cao, Jinde; Alsaedi, Ahmed

2017-08-01

This paper explores the problem of synchronization of a class of generalized reaction-diffusion neural networks with mixed time-varying delays. The mixed time-varying delays under consideration comprise of both discrete and distributed delays. Due to the development and merits of digital controllers, sampled-data control is a natural choice to establish synchronization in continuous-time systems. Using a newly introduced integral inequality, less conservative synchronization criteria that assure the global asymptotic synchronization of the considered generalized reaction-diffusion neural network and mixed delays are established in terms of linear matrix inequalities (LMIs). The obtained easy-to-test LMI-based synchronization criteria depends on the delay bounds in addition to the reaction-diffusion terms, which is more practicable. Upon solving these LMIs by using Matlab LMI control toolbox, a desired sampled-data controller gain can be acuqired without any difficulty. Finally, numerical examples are exploited to express the validity of the derived LMI-based synchronization criteria.

On mixed reality environments for minimally invasive therapy guidance: systems architecture, successes and challenges in their implementation from laboratory to clinic.

PubMed

Linte, Cristian A; Davenport, Katherine P; Cleary, Kevin; Peters, Craig; Vosburgh, Kirby G; Navab, Nassir; Edwards, Philip Eddie; Jannin, Pierre; Peters, Terry M; Holmes, David R; Robb, Richard A

2013-03-01

Mixed reality environments for medical applications have been explored and developed over the past three decades in an effort to enhance the clinician's view of anatomy and facilitate the performance of minimally invasive procedures. These environments must faithfully represent the real surgical field and require seamless integration of pre- and intra-operative imaging, surgical instrument tracking, and display technology into a common framework centered around and registered to the patient. However, in spite of their reported benefits, few mixed reality environments have been successfully translated into clinical use. Several challenges that contribute to the difficulty in integrating such environments into clinical practice are presented here and discussed in terms of both technical and clinical limitations. This article should raise awareness among both developers and end-users toward facilitating a greater application of such environments in the surgical practice of the future. Copyright © 2013 Elsevier Ltd. All rights reserved.

A One System Integrated Approach to Simulant Selection for Hanford High Level Waste Mixing and Sampling Tests - 13342

DOE Office of Scientific and Technical Information (OSTI.GOV)

Thien, Mike G.; Barnes, Steve M.

2013-07-01

The Hanford Tank Operations Contractor (TOC) and the Hanford Waste Treatment and Immobilization Plant (WTP) contractor are both engaged in demonstrating mixing, sampling, and transfer system capabilities using simulated Hanford High-Level Waste (HLW) formulations. This represents one of the largest remaining technical issues with the high-level waste treatment mission at Hanford. Previous testing has focused on very specific TOC or WTP test objectives and consequently the simulants were narrowly focused on those test needs. A key attribute in the Defense Nuclear Facilities Safety Board (DNFSB) Recommendation 2010-2 is to ensure testing is performed with a simulant that represents the broadmore » spectrum of Hanford waste. The One System Integrated Project Team is a new joint TOC and WTP organization intended to ensure technical integration of specific TOC and WTP systems and testing. A new approach to simulant definition has been mutually developed that will meet both TOC and WTP test objectives for the delivery and receipt of HLW. The process used to identify critical simulant characteristics, incorporate lessons learned from previous testing, and identify specific simulant targets that ensure TOC and WTP testing addresses the broad spectrum of Hanford waste characteristics that are important to mixing, sampling, and transfer performance are described. (authors)« less

Social Integration and Health Behavioral Change in San Luis, Honduras

ERIC Educational Resources Information Center

McQuestion, Michael J.; Calle, Ana Quijano; Drasbek, Christopher; Harkins, Thomas; Sagastume, Lourdes J.

2010-01-01

This study explores the effects of social integration on behavioral change in the course of an intensive, community-based public health intervention. The intervention trained volunteers and mobilized local organizations to promote 16 key family health practices in rural San Luis, Honduras, during 2004 to 2006. A mixed methods approach is used.…

Student Perceptions of Integrative Field Seminar: A Comparison of Three Models

ERIC Educational Resources Information Center

Harris, Helen; Myers, Dennis

2013-01-01

Student perceptions of 63 concentration year MSW students, grades, and faculty perceptions were examined to evaluate differences in educational outcomes and in learning experiences among a traditional classroom model, a mixed or hybrid model, and a webinar online model for delivery of integrative field seminars. No significant differences were…

Integrating pasture-based livestock production with annual crop production on the Great Plains to reduce loss of grassland wildlife

USDA-ARS?s Scientific Manuscript database

Tallgrass prairie has been replaced by corn and soybeans and mixed-grass prairie is being replaced by various annual crops. Annual crop fields support vegetarian diets but not much wildlife. Alternatively, integrating pastured livestock farming with annual crops can provide wildlife habitat. For ...

Developing and Sustaining an Inclusive Dance Program: Strategic Tools and Methods

ERIC Educational Resources Information Center

Morris, Merry Lynn; Baldeon, Marion; Scheuneman, Dwayne

2015-01-01

In the 1980s, mixed ability or physically integrated dance companies, such as AXIS and DancingWheels, began with professional performance goals, aimed at producing highquality choreographic work involving individuals with and without disabilities. Those companies are pioneers in the integrated dance field and serve as beneficial models of…

Integrating Wikis as Educational Tools for the Development of a Community of Inquiry

ERIC Educational Resources Information Center

Eteokleous, Nikleia; Ktoridou, Despo; Orphanou, Maria

2014-01-01

This article describes a study that attempted to evaluate the integration of wikis as an educational tool in successfully achieving the learning objectives of a fifth-grade linguistics and literature course. A mixed-method approach was employed--data were collected via questionnaires, reflective journals, observations, and interviews. The results…

Teacher Perspectives on Technology Integration Professional Development: Formal, Informal, and Independent Learning Activities

ERIC Educational Resources Information Center

Jones, Monty; Dexter, Sara

2018-01-01

This mixed-methods study examined the technology integration learning activities of four teachers throughout one year using weekly quantitative surveys and a series of three qualitative individual interviews. Through the teachers' own voices an illustration of their learning processes is presented, and the gap between what is supported by their…

High School Dual Enrollment in North Carolina: The Perspectives of Community College Chief Academic Officers

ERIC Educational Resources Information Center

Gallman, Kathleen L.

2017-01-01

This study evaluates dual enrollment programs through the eyes of North Carolina's community college chief academic officers (CAOs). Grounded in Tinto's theory of integration and the transformational leadership construct, a mixed methods approach was utilized to evaluate the perceptions of CAOs regarding the integration of high school students…

Elementary Science Teachers' Integration of Engineering Design into Science Instruction: Results from a Randomised Controlled Trial

ERIC Educational Resources Information Center

Maeng, Jennifer L.; Whitworth, Brooke A.; Gonczi, Amanda L.; Navy, Shannon L.; Wheeler, Lindsay B.

2017-01-01

This randomised controlled trial used a mixed-methods approach to investigate the frequency and how elementary teachers integrated engineering design (ED) principles into their science instruction following professional development (PD). The ED components of the PD were aligned with Cunningham and Carlsen's [(2014). "Teaching engineering…

Supporting Learner-Centered ICT Integration: The Influence of Collaborative and Needs-Based Professional Development

ERIC Educational Resources Information Center

MacDonald, Ronald

2009-01-01

A mixed-method study was carried out to investigate how teacher attitude and professional development influence learner-centered Information Communication Technology (ICT) integration. A questionnaire, interviews and observations were used to gather data in a school district in Nova Scotia, Canada. Teacher data were categorized by grade level,…

Integration of Environmental Education and Environmental Law Enforcement for Police Officers

ERIC Educational Resources Information Center

Bovornkijprasert, Sravoot; Rawang, Wee

2016-01-01

The purpose of this research was to establish an integrated model of environmental education (EE) and environmental law enforcement (ELE) to improve the efficiency of functional competency for police officers in Bangkok Metropolitan Police Division 9 (MBP Div. 9). The research design was mixed methods of quantitative and qualitative approaches…

Mixing It Up: Integrated, Interdisciplinary, Intriguing Science in the Elementary Classroom. An NSTA Press Journals Collection.

ERIC Educational Resources Information Center

National Science Teachers Association, Arlington, VA.

This compendium of articles from "Science and Children", the elementary school journal of the National Science Teachers Association (NSTA), aims to help teachers build connections in their students' minds. The articles describe lessons and units that are interdisciplinary, both integrated and interdisciplinary, or thematic. Each article is…

Phenomenological Influences in Minority Attitudes toward School Desegregation.

ERIC Educational Resources Information Center

Sobol, Marion Gross; Beck, William W.

1980-01-01

Examines whether Black parents' satisfaction with schools reflects their perception that their children's schools are integrated or is based on the schools' actual integration. Concludes that perception is more important than reality: if the parent thinks the child attends a mixed school, s/he will be more positive toward that school. (Author/GC)

Pyrosequencing analysis for characterization of bacterial diversity in a soil as affected by integrated livestock-cotton production systems

USDA-ARS?s Scientific Manuscript database

Impacts of integrated livestock-crop production systems compared to specialized systems on soil bacterial diversity have not been well documented. We used a bacterial tag encoded FLX amplicon pyrosequencing (bTEFAP) method to evaluate bacterial diversity of a clay loam soil (Fine, mixed, thermic To...

Integrated mixed methods policy analysis for sustainable food systems: trends, challenges and future research.

PubMed

Cuevas, Soledad

Agriculture is a major contributor to greenhouse gas emissions, an important part of which is associated to deforestation and indirect land use change. Appropriate and coherent food policies can play an important role in aligning health, economic and environmental goals. From the point of view of policy analysis, however, this requires multi-sectoral, interdisciplinary approaches which can be highly complex. Important methodological advances in the area are not exempted from limitations and criticism. We argue that there is scope for further developments in integrated quantitative and qualitative policy analysis combining existing methods, including mathematical modelling and stakeholder analysis. We outline methodological trends in the field, briefly characterise integrated mixed methods policy analysis and identify contributions, challenges and opportunities for future research. In particular, this type of approach can help address issues of uncertainty and context-specific validity, incorporate multiple perspectives and help advance meaningful interdisciplinary collaboration in the field. Substantial challenges remain, however, such as the integration of key issues related to non-communicable disease, or the incorporation of a broader range of qualitative approaches that can address important cultural and ethical dimensions of food.

Impulsive synchronization of Markovian jumping randomly coupled neural networks with partly unknown transition probabilities via multiple integral approach.

PubMed

Chandrasekar, A; Rakkiyappan, R; Cao, Jinde

2015-10-01

This paper studies the impulsive synchronization of Markovian jumping randomly coupled neural networks with partly unknown transition probabilities via multiple integral approach. The array of neural networks are coupled in a random fashion which is governed by Bernoulli random variable. The aim of this paper is to obtain the synchronization criteria, which is suitable for both exactly known and partly unknown transition probabilities such that the coupled neural network is synchronized with mixed time-delay. The considered impulsive effects can be synchronized at partly unknown transition probabilities. Besides, a multiple integral approach is also proposed to strengthen the Markovian jumping randomly coupled neural networks with partly unknown transition probabilities. By making use of Kronecker product and some useful integral inequalities, a novel Lyapunov-Krasovskii functional was designed for handling the coupled neural network with mixed delay and then impulsive synchronization criteria are solvable in a set of linear matrix inequalities. Finally, numerical examples are presented to illustrate the effectiveness and advantages of the theoretical results. Copyright © 2015 Elsevier Ltd. All rights reserved.

The Diagnosis and application of a convective vorticity vector associated with convective systems

NASA Astrophysics Data System (ADS)

Gao, S.; Zhou, Y.; Tao, W.

2005-05-01

Although dry/moist potential vorticity is a very useful and powerful physical quantity in the large scale dynamics, it is not a quite ideal dynamical tool for the study of convective systems or severe storms. A new convective vorticity vector (CVV) is introduced in this study to identify the development of convective systems or severe storms. The daily Aviation (AVN) Model Data is used to diagnose the distribution of the CVV associated with rain storms occurred in the period of Meiyu in 1998. The results have clearly demonstrated that the CVV is an effective vector for indicating the convective actions along the Meiyu front. The CVV also is used to diagnose a 2-D cloud-resolving simulation data associated with 2-D tropical convection. The cloud model is forced by the vertical velocity, zonal wind, horizontal advection, and sea surface temperature obtained from the Tropical cean-Global tmosphere (TOGA) Coupled Ocean-Atmosphere Response Experiment (COARE) and is integrated for a selected 10-day period. The CVV has zonal and vertical components in the 2-D x-z frame. Analysis of zonally averaged and mass-integrated quantities shows that the correlation coefficient between the vertical component of the CVV and the sum of the cloud hydrometeor mixing ratios is 0.81, whereas the correlation coefficient between the zonal component and the sum of the mixing ratios is only 0.18. This indicates that the vertical component of the CVV is closely associated with tropical convection. The tendency equation for the vertical component of the CVV is derived and the zonally averaged and mass-integrated tendency budgets are analyzed. The tendency of the vertical component of the CVV is determined by the interaction between the vorticity and the zonal gradient of cloud heating. The results demonstrate that the vertical component of the CVV is a cloud-linked parameter and can be used to study tropical convection.

{rho}-{omega} mixing and spin dependent charge-symmetry violating potential

DOE Office of Scientific and Technical Information (OSTI.GOV)

Biswas, Subhrajyoti; Roy, Pradip; Dutt-Mazumder, Abhee K.

2008-10-15

We construct the charge symmetry violating (CSV) nucleon-nucleon potential induced by the {rho}{sup 0}-{omega} mixing due to the neutron-proton mass difference driven by the NN loop. Analytical expression for the two-body CSV potential is presented containing both the central and noncentral NN interaction. We show that the {rho}NN tensor interaction can significantly enhance the charge symmetry violating NN interaction even if the momentum dependent off-shell {rho}{sup 0}-{omega} mixing amplitude is considered. It is also shown that the inclusion of form factors removes the divergence arising out of the contact interaction. Consequently, we see that the precise size of the computedmore » scattering length difference depends on how the short-range aspects of the CSV potential are treated.« less

Electroosmotic Mixing in Nanochannels

NASA Astrophysics Data System (ADS)

Conlisk, A. T.; Chen, Lei

2004-11-01

Electroosmotic flow in nanochannels is characterized by low Reynolds number in which flow mixing is difficult because of the dominance of molecular diffusion. Previous work shows that heterogenerous surface potential could generate a circulation region within the bulk flow near the surface. But all of this work requires that the ionic species be pairs of ions of equal and opposite valence and the distribution of ions is not considered. In the present work the electroosmotic flow in a rectangular channel with non-uniform zeta potential is examined. A model for the two dimensional electroosmotic flow problem is established. The distributions of potential, velocity and mole fractions are calculated numerically. Vortex formation is observed within the bulk flow near the the region of non-uniform zeta potential which suggests mixing can be induced.

Salinity build-up in osmotic membrane bioreactors: Causes, impacts, and potential cures.

PubMed

Song, Xiaoye; Xie, Ming; Li, Yun; Li, Guoxue; Luo, Wenhai

2018-06-01

Osmotic membrane bioreactor (OMBR), which integrates forward osmosis (FO) with biological treatment, has been developed to advance wastewater treatment and reuse. OMBR is superior to conventional MBR, particularly in terms of higher effluent quality, lower membrane fouling propensity, and higher membrane fouling reversibility. Nevertheless, advancement and future deployment of OMBR are hindered by salinity build-up in the bioreactor (e.g., up to 50 mS/cm indicated by the mixed liquor conductivity), due to high salt rejection of the FO membrane and reverse diffusion of the draw solution. This review comprehensively elucidates the relative significance of these two mechanisms towards salinity build-up and its associated effects in OMBR operation. Recently proposed strategies to mitigate salinity build-up in OMBR are evaluated and compared to highlight their potential in practical applications. In addition, the complementarity of system optimization and modification to effectively manage salinity build-up are recommended for sustainable OMBR development. Copyright © 2018 Elsevier Ltd. All rights reserved.