Evidence-Based Identification of Key Beliefs Explaining Infant Male Circumcision Motivation Among Expectant Parents in Zimbabwe: Targets for Behavior Change Messaging.

PubMed

Montaño, Daniel E; Tshimanga, Mufuta; Hamilton, Deven T; Gorn, Gerald; Kasprzyk, Danuta

2018-02-01

Slow adult male circumcision uptake is one factor leading some to recommend increased priority for infant male circumcision (IMC) in sub-Saharan African countries. This research, guided by the integrated behavioral model (IBM), was carried out to identify key beliefs that best explain Zimbabwean parents' motivation to have their infant sons circumcised. A quantitative survey, designed from qualitative elicitation study results, was administered to independent representative samples of 800 expectant mothers and 795 expectant fathers in two urban and two rural areas in Zimbabwe. Multiple regression analyses found IMC motivation among fathers was explained by instrumental attitude, descriptive norm and self-efficacy; while motivation among mothers was explained by instrumental attitude, injunctive norm, descriptive norm, self-efficacy, and perceived control. Regression analyses of beliefs underlying IBM constructs found some overlap but many differences in key beliefs explaining IMC motivation among mothers and fathers. We found differences in key beliefs among urban and rural parents. Urban fathers' IMC motivation was explained best by behavioral beliefs, while rural fathers' motivation was explained by both behavioral and efficacy beliefs. Urban mothers' IMC motivation was explained primarily by behavioral and normative beliefs, while rural mothers' motivation was explained mostly by behavioral beliefs. The key beliefs we identified should serve as targets for developing messages to improve demand and maximize parent uptake as IMC programs are rolled out. These targets need to be different among urban and rural expectant mothers and fathers.

One-pot green synthesis of luminescent gold nanoparticles using imidazole derivative of chitosan.

PubMed

Nazirov, Alexander; Pestov, Alexander; Privar, Yuliya; Ustinov, Alexander; Modin, Evgeny; Bratskaya, Svetlana

2016-10-20

Water soluble luminescent gold nanoparticles with average size 2.3nm were for the first time synthesized by completely green method of Au(III) reduction using chitosan derivative-biocompatible nontoxic N-(4-imidazolyl)methylchitosan (IMC) as both reducing and stabilizing agent. Reduction of Au(III) to gold nanoparticles in IMC solution is a slow process, in which coordination power of biopolymer controls both reducing species concentration and gold crystal growth rate. Gold nanoparticles formed in IMC solution do not manifest surface plasmon resonance, but exhibit luminescence at 375nm under UV light excitation at 230nm. Due to biological activity of imidazolyl-containing polymers and their ability to bind proteins and drugs, the obtained ultra-small gold nanoparticles can find an application for biomolecules detection, bio-imaging, drug delivery, and catalysis. Very high catalytic activity (as compared to gold nanoparticles obtained by other green methods) was found for Au/IMC nanoparticles in the model reaction of p-nitrophenol reduction providing complete conversion of p-nitrophenol to p-aminophenol within 180-190s under mild conditions. Copyright © 2016 Elsevier Ltd. All rights reserved.

Growth kinetics of Cu6Sn5 intermetallic compound at liquid-solid interfaces in Cu/Sn/Cu interconnects under temperature gradient

PubMed Central

Zhao, N.; Zhong, Y.; Huang, M.L.; Ma, H.T.; Dong, W.

2015-01-01

The growth behavior of intermetallic compounds (IMCs) at the liquid-solid interfaces in Cu/Sn/Cu interconnects during reflow at 250 °C and 280 °C on a hot plate was investigated. Being different from the symmetrical growth during isothermal aging, the interfacial IMCs showed clearly asymmetrical growth during reflow, i.e., the growth of Cu6Sn5 IMC at the cold end was significantly enhanced while that of Cu3Sn IMC was hindered especially at the hot end. It was found that the temperature gradient had caused the mass migration of Cu atoms from the hot end toward the cold end, resulting in sufficient Cu atomic flux for interfacial reaction at the cold end while inadequate Cu atomic flux at the hot end. The growth mechanism was considered as reaction/thermomigration-controlled at the cold end and grain boundary diffusion/thermomigration-controlled at the hot end. A growth model was established to explain the growth kinetics of the Cu6Sn5 IMC at both cold and hot ends. The molar heat of transport of Cu atoms in molten Sn was calculated as + 11.12 kJ/mol at 250 °C and + 14.65 kJ/mol at 280 °C. The corresponding driving force of thermomigration in molten Sn was estimated as 4.82 × 10−19 N and 6.80 × 10−19 N. PMID:26311323

Creating an Online Library To Support a Virtual Learning Community.

ERIC Educational Resources Information Center

Sandelands, Eric

1998-01-01

International Management Centres (IMC), an independent business school, and Anbar Electronic Intelligence (AEI), a database publisher, have created a virtual library for IMC's virtual business school. Topics discussed include action learning; IMC's partnership with AEI; the virtual university model; designing virtual library resources; and…

The application of "integrated marketing communications" to social marketing and health communication: organizational challenges and implications.

PubMed

Nowak, G; Cole, G; Kirby, S; Freimuth, V; Caywood, C

1998-01-01

Influencing consumer behavior is a difficult and often resource-intensive undertaking, with success usually requiring identifying, describing, and understanding target audiences; solid product and/or service positioning relative to competitors; and significant media and communication resources. Integrated marketing communication (IMC) is a new way of organizing and managing persuasive communication tools and functions which involves realigning communications to consider the flow of information from an organization from the viewpoint of end consumers. Although the application of IMC to social marketing remains relatively unexplored, the IMC literature and recent efforts by the US Centers for Disease Prevention and Control suggest that integrated communication approaches have much to offer social marketing and health communication efforts. IMC, IMC and social marketing, and implications of IMC for public and private sector social marketing programs are discussed.

Maritime continent coastlines controlling Earth's climate

NASA Astrophysics Data System (ADS)

Yamanaka, Manabu D.; Ogino, Shin-Ya; Wu, Pei-Ming; Jun-Ichi, Hamada; Mori, Shuichi; Matsumoto, Jun; Syamsudin, Fadli

2018-12-01

During the Monsoon Asian Hydro-Atmosphere Scientific Research and Prediction Initiative (MAHASRI; 2006-16), we carried out two projects over the Indonesian maritime continent (IMC), constructing the Hydrometeorological Array for Intraseasonal Variation-Monsoon Automonitoring (HARIMAU; 2005-10) radar network and setting up a prototype institute for climate studies, the Maritime Continent Center of Excellence (MCCOE; 2009-14). Here, we review the climatological features of the world's largest "regional" rainfall over the IMC studied in these projects. The fundamental mode of atmospheric variability over the IMC is the diurnal cycle generated along coastlines by land-sea temperature contrast: afternoon land becomes hotter than sea by clear-sky insolation before noon, with the opposite contrast before sunrise caused by evening rainfall-induced "sprinkler"-like land cooling (different from the extratropical infrared cooling on clear nights). Thus, unlike the extratropics, the diurnal cycle over the IMC is more important in the rainy season. The intraseasonal, seasonal to annual, and interannual climate variabilities appear as amplitude modulations of the diurnal cycle. For example, in Jawa and Bali the rainy season is the southern hemispheric summer, because land heating in the clear morning and water vapor transport by afternoon sea breeze is strongest in the season of maximum insolation. During El Niño, cooler sea water surrounding the IMC makes morning maritime convection and rainfall weaker than normal. Because the diurnal cycle is almost the only mechanism generating convective clouds systematically near the equator with little cyclone activity, the local annual rainfall amount in the tropics is a steeply decreasing function of coastal distance ( e-folding scale 100-300 km), and regional annual rainfall is an increasing function of "coastline density" (coastal length/land area) measured at a horizontal resolution of 100 km. The coastline density effect explains why rainfall and latent heating over the IMC are twice the global mean for an area that makes up only 4% of the Earth's surface. The diurnal cycles appearing almost synchronously over the whole IMC generate teleconnections between the IMC convection and the global climate. Thus, high-resolution (<< 100 km; << 1 day) observations and models over the IMC are essential to improve both local disaster prevention and global climate prediction.

Sensitivity analysis of helicopter IMC decelerating steep approach and landing performance to navigation system parameters

NASA Technical Reports Server (NTRS)

Karmali, M. S.; Phatak, A. V.

1982-01-01

Results of a study to investigate, by means of a computer simulation, the performance sensitivity of helicopter IMC DSAL operations as a function of navigation system parameters are presented. A mathematical model representing generically a navigation system is formulated. The scenario simulated consists of a straight in helicopter approach to landing along a 6 deg glideslope. The deceleration magnitude chosen is 03g. The navigation model parameters are varied and the statistics of the total system errors (TSE) computed. These statistics are used to determine the critical navigation system parameters that affect the performance of the closed-loop navigation, guidance and control system of a UH-1H helicopter.

An Operations Concept for Integrated Model-Centric Engineering at JPL

NASA Technical Reports Server (NTRS)

Bayer, Todd J.; Cooney, Lauren A.; Delp, Christopher L.; Dutenhoffer, Chelsea A.; Gostelow, Roli D.; Ingham, Michel D.; Jenkins, J. Steven; Smith, Brian S.

2010-01-01

As JPL's missions grow more complex, the need for improved systems engineering processes is becoming clear. Of significant promise in this regard is the move toward a more integrated and model-centric approach to mission conception, design, implementation and operations. The Integrated Model-Centric Engineering (IMCE) Initiative, now underway at JPL, seeks to lay the groundwork for these improvements. This paper will report progress on three fronts: articulating JPL's need for IMCE; characterizing the enterprise into which IMCE capabilities will be deployed; and constructing an operations concept for a flight project development in an integrated model-centric environment.

Codeformation processing of mechanically-dissimilar metal/intermetallic composites

NASA Astrophysics Data System (ADS)

Marte, Judson Sloan

A systematic and scientific approach has been applied to the study of codeformation processing. A series of composites having mechanically-dissimilar phases were developed in which the high temperature flow behavior of the reinforcement material could be varied independent of the matrix. This was accomplished through the use of a series of intermetallic matrix composites (IMCs) as discontinuous reinforcements in an otherwise conventional metal matrix composite. The IMCs are produced using an in-situ reaction synthesis technique, called the XD(TM) process. The temperature of the exothermic synthesis reaction, called the adiabatic temperature, has been calculated and shown to increase with increasing volume percentage of TiB2 reinforcement. Further, this temperature has been shown to effect the size and spacing of the TiB2, microstructural features which are often used in discontinuous composite strength models. Study of the high temperature flow behavior of the components of the metal/IMC composite is critical to the development of an understanding of codeformation. A series of compression tests performed at 1000° to 1200°C and strain-rates of 10-3 and 10-4 sec-1. Peak flow stresses were used to evaluate the influence of material properties and process conditions. These data were incorporated into phenomenologically-based constitutive equations that have been used to predict the flow behavior. It has been determined that plastic deformation of the IMCs occurs readily, and is largely TiB2 independent, at temperatures approaching the melting point of the intermetallic matrices. Ti-6Al-4V/IMC powder blends were extruded at high temperatures to achieve commensurately deformed microstructures. The results of codeformation processing were analyzed in terms of the plastic strain of the IMC particulates. IMC particle deformation was shown to increase with increasing IMC particle size, volume percentage of IMC, extrusion temperature, homologous temperature, extrusion strain-rate, and decreasing TiB2 reinforcement within the IMCs. A series of finite element models were developed to simulate codeformation processing via the extrusion of a discontinuously-reinforced composite. The results were evaluated through comparison between average equivalent strain in matrix and reinforcement elements. These results show that codeformation should increase with increasing volume percentage of IMC, homologous temperature, volume percentage of IMC, and decreasing IMC particle size. With the exception of the particle size, these results correlate to those of the experimental extrusion analysis.

Perpendicular Growth Characteristics of Cu-Sn Intermetallic Compounds at the Surface of 99Sn-1Cu/Cu Solder Interconnects

NASA Astrophysics Data System (ADS)

Chen, Zhiwen; Liu, Changqing; Wu, Yiping; An, Bing

2015-12-01

The growth of intermetallic compounds (IMCs) on the free surface of 99Sn-1Cu solder joints perpendicular to the interdiffusion direction has been investigated in this work. The specimens were specifically designed and polished to reveal a flat free surface at the solder/Cu interface for investigation. After aging at 175°C for progressively increased durations, the height of the perpendicular IMCs was examined and found to follow a parabolic law with aging duration that could be expressed as y = 0.11√ t, where t is the aging duration in hours and y is the height of the perpendicular IMCs in μm. For comparison, the planar growth of IMCs along the interdiffusion direction was also investigated in 99Sn-1Cu/Cu solder joints. After prolonged aging at 175°C, the thickness of the planar interfacial IMC layers also increased parabolically with aging duration and could be expressed as h_{{IMC}} = 0.27√ t + 4.6, where h is the thickness in μm and t is the time in hours. It was found that both the planar and perpendicular growth of the IMCs were diffusion-controlled processes, but the perpendicular growth of the IMCs was much slower than their planar growth due to the longer diffusion distance. It is proposed that Cu3Sn forms prior to the formation of Cu6Sn5 in the perpendicular IMCs, being the reverse order compared with the planar IMC growth.

The iterative thermal emission method: A more implicit modification of IMC

NASA Astrophysics Data System (ADS)

Long, A. R.; Gentile, N. A.; Palmer, T. S.

2014-11-01

For over 40 years, the Implicit Monte Carlo (IMC) method has been used to solve challenging problems in thermal radiative transfer. These problems typically contain regions that are optically thick and diffusive, as a consequence of the high degree of ;pseudo-scattering; introduced to model the absorption and reemission of photons from a tightly-coupled, radiating material. IMC has several well-known features that could be improved: a) it can be prohibitively computationally expensive, b) it introduces statistical noise into the material and radiation temperatures, which may be problematic in multiphysics simulations, and c) under certain conditions, solutions can be nonphysical, in that they violate a maximum principle, where IMC-calculated temperatures can be greater than the maximum temperature used to drive the problem. We have developed a variant of IMC called iterative thermal emission IMC, which is designed to have a reduced parameter space in which the maximum principle is violated. ITE IMC is a more implicit version of IMC in that it uses the information obtained from a series of IMC photon histories to improve the estimate for the end of time step material temperature during a time step. A better estimate of the end of time step material temperature allows for a more implicit estimate of other temperature-dependent quantities: opacity, heat capacity, Fleck factor (probability that a photon absorbed during a time step is not reemitted) and the Planckian emission source. We have verified the ITE IMC method against 0-D and 1-D analytic solutions and problems from the literature. These results are compared with traditional IMC. We perform an infinite medium stability analysis of ITE IMC and show that it is slightly more numerically stable than traditional IMC. We find that significantly larger time steps can be used with ITE IMC without violating the maximum principle, especially in problems with non-linear material properties. The ITE IMC method does however yield solutions with larger variance because each sub-step uses a different Fleck factor (even at equilibrium).

The iterative thermal emission method: A more implicit modification of IMC

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, A.R., E-mail: arlong.ne@tamu.edu; Gentile, N.A.; Palmer, T.S.

2014-11-15

For over 40 years, the Implicit Monte Carlo (IMC) method has been used to solve challenging problems in thermal radiative transfer. These problems typically contain regions that are optically thick and diffusive, as a consequence of the high degree of “pseudo-scattering” introduced to model the absorption and reemission of photons from a tightly-coupled, radiating material. IMC has several well-known features that could be improved: a) it can be prohibitively computationally expensive, b) it introduces statistical noise into the material and radiation temperatures, which may be problematic in multiphysics simulations, and c) under certain conditions, solutions can be nonphysical, in thatmore » they violate a maximum principle, where IMC-calculated temperatures can be greater than the maximum temperature used to drive the problem. We have developed a variant of IMC called iterative thermal emission IMC, which is designed to have a reduced parameter space in which the maximum principle is violated. ITE IMC is a more implicit version of IMC in that it uses the information obtained from a series of IMC photon histories to improve the estimate for the end of time step material temperature during a time step. A better estimate of the end of time step material temperature allows for a more implicit estimate of other temperature-dependent quantities: opacity, heat capacity, Fleck factor (probability that a photon absorbed during a time step is not reemitted) and the Planckian emission source. We have verified the ITE IMC method against 0-D and 1-D analytic solutions and problems from the literature. These results are compared with traditional IMC. We perform an infinite medium stability analysis of ITE IMC and show that it is slightly more numerically stable than traditional IMC. We find that significantly larger time steps can be used with ITE IMC without violating the maximum principle, especially in problems with non-linear material properties. The ITE IMC method does however yield solutions with larger variance because each sub-step uses a different Fleck factor (even at equilibrium)« less

Evaluation of the physicochemical and biopharmaceutical properties of fluoro-indomethacin.

PubMed

Mori, Michela M; Airaksinen, Anu J; Hirvonen, Jouni T; Santos, Hélder A; Caramella, Carla M

2013-01-01

Drug nanocarriers have shown great potential in therapy and as diagnostic probes, e.g. in imaging of cancer and inflammation. Imaging can be applied to localize the carrier or the drug itself in the body and/or tissues. In this particular case it is important that drug molecules have the characteristics for possible detection, e.g. after modification with positron emission tomography compliant radioisotopes, without affecting their pharmacological behavior. In order to easily and efficiently follow the ADME profile of the drug after loaded into nanocarriers, the drug can be radiolabelled with, e.g. 18F-label, in order to assess its biodistribution after enteral and parenteral administration in rats. However, this is only possible if the derivative compound behaves similarly to the parent drug compound. In this study, indomethacin (a poorly water-soluble drug) was chosen as a model compound and aimed to evaluate the physicochemical and biopharmaceutical properties of an analog of indomethacin (IMC), fluoro-indomethacin (F-IMC). Although some of the physicochemical and biopharmaceutical properties of IMC are already known, in order to establish a feasible comparison between IMC and F-IMC, the behavior of the former was also investigated in the same conditions as for F-IMC. In this context, both IMC and F-IMC were thermally and morphologically studied. Furthermore, the following properties were also studied for both compounds: pKa and logP, solubility and dissolution profiles at physiological pH values, and toxicity at different concentrations in Caco-2 cells. Finally, the transport across Caco- 2 monolayers of the IMC and F-IMC at physiological pH range was also investigated. The results obtained showed similar values in pKalogP, solubility, dissolution, cytotoxicity, and permeability for both compounds. Thus, there might be strong evidence that both IMC and F-IMC should have a similar ADME behavior and profiles in vivo. The results provide fundamental tools and ideas for further research with nanocarriers of 18F-IMC.

Effects of In and Ni Addition on Microstructure of Sn-58Bi Solder Joint

NASA Astrophysics Data System (ADS)

Mokhtari, Omid; Nishikawa, Hiroshi

2014-11-01

In this study, the effect of adding 0.5 wt.% and 1 wt.% In and Ni to Sn-58Bi solder on intermetallic compound (IMC) layers at the interface and the microstructure of the solder alloys were investigated during reflow and thermal aging by scanning electron microscopy and electron probe micro-analysis. The results showed that the addition of minor elements was not effective in suppressing the IMC growth during the reflow; however, the addition of 0.5 wt.% In and Ni was effective in suppressing the IMC layer growth during thermal aging. The thickening kinetics of the total IMC layer was analyzed by plotting the mean thickness versus the aging time on log-log coordinates, and the results showed the transition point from grain boundary diffusion control to a volume diffusion control mechanism. The results also showed that the minor addition of In can significantly suppress the coarsening of the Bi phase.

Effect of dual laser beam on dissimilar welding-brazing of aluminum to galvanized steel

NASA Astrophysics Data System (ADS)

Mohammadpour, Masoud; Yazdian, Nima; Yang, Guang; Wang, Hui-Ping; Carlson, Blair; Kovacevic, Radovan

2018-01-01

In this investigation, the joining of two types of galvanized steel and Al6022 aluminum alloy in a coach peel configuration was carried out using a laser welding-brazing process in dual-beam mode. The feasibility of this method to obtain a sound and uniform brazed bead with high surface quality at a high welding speed was investigated by employing AlSi12 as a consumable material. The effects of alloying elements on the thickness of intermetallic compound (IMC) produced at the interface of steel and aluminum, surface roughness, edge straightness and the tensile strength of the resultant joint were studied. The comprehensive study was conducted on the microstructure of joints by means of a scanning electron microscopy and EDS. Results showed that a dual-beam laser shape and high scanning speed could control the thickness of IMC as thin as 3 μm and alter the failure location from the steel-brazed interface toward the Al-brazed interface. The numerical simulation of thermal regime was conducted by the Finite Element Method (FEM), and simulation results were validated through comparative experimental data. FEM thermal modeling evidenced that the peak temperatures at the Al-steel interface were around the critical temperature range of 700-900 °C that is required for the highest growth rate of IMC. However, the time duration that the molten pool was placed inside this temperature range was less than 1 s, and this duration was too short for diffusion-control based IMC growth.

Internal model control for industrial wireless plant using WirelessHART hardware-in-the-loop simulator.

PubMed

Tran, Chung Duc; Ibrahim, Rosdiazli; Asirvadam, Vijanth Sagayan; Saad, Nordin; Sabo Miya, Hassan

2018-04-01

The emergence of wireless technologies such as WirelessHART and ISA100 Wireless for deployment at industrial process plants has urged the need for research and development in wireless control. This is in view of the fact that the recent application is mainly in monitoring domain due to lack of confidence in control aspect. WirelessHART has an edge over its counterpart as it is based on the successful Wired HART protocol with over 30 million devices as of 2009. Recent works on control have primarily focused on maintaining the traditional PID control structure which is proven not adequate for the wireless environment. In contrast, Internal Model Control (IMC), a promising technique for delay compensation, disturbance rejection and setpoint tracking has not been investigated in the context of WirelessHART. Therefore, this paper discusses the control design using IMC approach with a focus on wireless processes. The simulation and experimental results using real-time WirelessHART hardware-in-the-loop simulator (WH-HILS) indicate that the proposed approach is more robust to delay variation of the network than the PID. Copyright © 2017. Published by Elsevier Ltd.

Design and Management of an IMC Micro Center.

ERIC Educational Resources Information Center

Bunson, Stanley N.

1988-01-01

Outlines design and management factors to be considered when developing a microcomputer lab for an instructional media center (IMC). Highlights include environmental considerations, including spatial arrangements, furniture, power requirements, temperature control, and lighting; software and hardware acquisition; and administrative considerations,…

Cognitive behavior therapy for pediatric functional abdominal pain: a randomized controlled trial.

PubMed

van der Veek, Shelley M C; Derkx, Bert H F; Benninga, Marc A; Boer, Frits; de Haan, Else

2013-11-01

This randomized controlled trial investigated the effectiveness of a 6-session protocolized cognitive behavior therapy (CBT) compared with 6 visits to a pediatrician (intensive medical care; IMC) for the treatment of pediatric functional abdominal pain (FAP). One hundred four children aged 7 to 18 were randomized to CBT or IMC. CBT was delivered primarily by trained master's degree students in psychology; IMC was delivered by pediatricians or pediatric gastroenterologists. Assessments were performed pretreatment, posttreatment, and at 6- and 12-month follow-up. Primary outcomes were level of abdominal pain (AP) as reported on questionnaires and diaries. Secondary outcomes were other gastrointestinal complaints, functional disability, other somatic complaints, anxiety, depression, and quality of life. Both CBT and IMC resulted in a significant decrease in AP (P < .001), but no significant difference was found between the treatments in their effectiveness (P > .05 for all end points). According to the questionnaire-derived data, 1 year after treatment, 60% of children that received CBT had significantly improved or recovered, versus 56.4% of children receiving IMC, which did not significantly differ (P = .47). These percentages were 65.8% versus 62.8% according to the diary-derived data, which also did not significantly differ (P = .14). Additionally, nearly all secondary outcomes improved after treatment. CBT was equally effective as IMC in reducing AP in children with FAP. More research into the specific working mechanisms of CBT for pediatric FAP is needed.

Attitude determination for high-accuracy submicroradian jitter pointing on space-based platforms

NASA Astrophysics Data System (ADS)

Gupta, Avanindra A.; van Houten, Charles N.; Germann, Lawrence M.

1990-10-01

A description of the requirement definition process is given for a new wideband attitude determination subsystem (ADS) for image motion compensation (IMC) systems. The subsystem consists of either lateral accelerometers functioning in differential pairs or gas-bearing gyros for high-frequency sensors using CCD-based star trackers for low-frequency sensors. To minimize error the sensor signals are combined so that the mixing filter does not allow phase distortion. The two ADS models are introduced in an IMC simulation to predict measurement error, correction capability, and residual image jitter for a variety of system parameters. The IMC three-axis testbed is utilized to simulate an incoming beam in inertial space. Results demonstrate that both mechanical and electronic IMC meet the requirements of image stabilization for space-based observation at submicroradian-jitter levels. Currently available technology may be employed to implement IMC systems.

Differential Roles for Inner Membrane Complex Proteins across Toxoplasma gondii and Sarcocystis neurona Development

PubMed Central

Dubey, Rashmi; Harrison, Brooke; Dangoudoubiyam, Sriveny; Bandini, Giulia; Cheng, Katherine; Kosber, Aziz; Agop-Nersesian, Carolina; Howe, Daniel K.; Samuelson, John; Ferguson, David J. P.

2017-01-01

ABSTRACT The inner membrane complex (IMC) of apicomplexan parasites contains a network of intermediate filament-like proteins. The 14 alveolin domain-containing IMC proteins in Toxoplasma gondii fall into different groups defined by their distinct spatiotemporal dynamics during the internal budding process of tachyzoites. Here, we analyzed representatives of different IMC protein groups across all stages of the Toxoplasma life cycle and during Sarcocystis neurona asexual development. We found that across asexually dividing Toxoplasma stages, IMC7 is present exclusively in the mother’s cytoskeleton, whereas IMC1 and IMC3 are both present in mother and daughter cytoskeletons (IMC3 is strongly enriched in daughter buds). In developing macro- and microgametocytes, IMC1 and -3 are absent, whereas IMC7 is lost in early microgametocytes but retained in macrogametocytes until late in their development. We found no roles for IMC proteins during meiosis and sporoblast formation. However, we observed that IMC1 and IMC3, but not IMC7, are present in sporozoites. Although the spatiotemporal pattern of IMC15 and IMC3 suggests orthologous functions in Sarcocystis, IMC7 may have functionally diverged in Sarcocystis merozoites. To functionally characterize IMC proteins, we knocked out IMC7, -12, -14, and -15 in Toxoplasma. IMC14 and -15 appear to be involved in switching between endodyogeny and endopolygeny. In addition, IMC7, -12, and -14, which are all recruited to the cytoskeleton outside cytokinesis, are critical for the structural integrity of extracellular tachyzoites. Altogether, stage- and development-specific roles for IMC proteins can be discerned, suggesting different niches for each IMC protein across the entire life cycle. IMPORTANCE The inner membrane complex (IMC) is a defining feature of apicomplexan parasites key to both their motility and unique cell division. To provide further insights into the IMC, we analyzed the dynamics and functions of representative alveolin domain-containing IMC proteins across developmental stages. Our work shows universal but distinct roles for IMC1, -3, and -7 during Toxoplasma asexual division but more specialized functions for these proteins during gametogenesis. In addition, we find that IMC15 is involved in daughter formation in both Toxoplasma and Sarcocystis. IMC14 and IMC15 function in limiting the number of Toxoplasma offspring per division. Furthermore, IMC7, -12, and -14, which are recruited in the G1 cell cycle stage, are required for stress resistance of extracellular tachyzoites. Thus, although the roles of the different IMC proteins appear to overlap, stage- and development-specific behaviors indicate that their functions are uniquely tailored to each life stage requirement. PMID:29062899

Differential Roles for Inner Membrane Complex Proteins across Toxoplasma gondii and Sarcocystis neurona Development.

PubMed

Dubey, Rashmi; Harrison, Brooke; Dangoudoubiyam, Sriveny; Bandini, Giulia; Cheng, Katherine; Kosber, Aziz; Agop-Nersesian, Carolina; Howe, Daniel K; Samuelson, John; Ferguson, David J P; Gubbels, Marc-Jan

2017-01-01

The inner membrane complex (IMC) of apicomplexan parasites contains a network of intermediate filament-like proteins. The 14 alveolin domain-containing IMC proteins in Toxoplasma gondii fall into different groups defined by their distinct spatiotemporal dynamics during the internal budding process of tachyzoites. Here, we analyzed representatives of different IMC protein groups across all stages of the Toxoplasma life cycle and during Sarcocystis neurona asexual development. We found that across asexually dividing Toxoplasma stages, IMC7 is present exclusively in the mother's cytoskeleton, whereas IMC1 and IMC3 are both present in mother and daughter cytoskeletons (IMC3 is strongly enriched in daughter buds). In developing macro- and microgametocytes, IMC1 and -3 are absent, whereas IMC7 is lost in early microgametocytes but retained in macrogametocytes until late in their development. We found no roles for IMC proteins during meiosis and sporoblast formation. However, we observed that IMC1 and IMC3, but not IMC7, are present in sporozoites. Although the spatiotemporal pattern of IMC15 and IMC3 suggests orthologous functions in Sarcocystis , IMC7 may have functionally diverged in Sarcocystis merozoites. To functionally characterize IMC proteins, we knocked out IMC7, -12, -14, and -15 in Toxoplasma . IMC14 and -15 appear to be involved in switching between endodyogeny and endopolygeny. In addition, IMC7, -12, and -14, which are all recruited to the cytoskeleton outside cytokinesis, are critical for the structural integrity of extracellular tachyzoites. Altogether, stage- and development-specific roles for IMC proteins can be discerned, suggesting different niches for each IMC protein across the entire life cycle. IMPORTANCE The inner membrane complex (IMC) is a defining feature of apicomplexan parasites key to both their motility and unique cell division. To provide further insights into the IMC, we analyzed the dynamics and functions of representative alveolin domain-containing IMC proteins across developmental stages. Our work shows universal but distinct roles for IMC1, -3, and -7 during Toxoplasma asexual division but more specialized functions for these proteins during gametogenesis. In addition, we find that IMC15 is involved in daughter formation in both Toxoplasma and Sarcocystis . IMC14 and IMC15 function in limiting the number of Toxoplasma offspring per division. Furthermore, IMC7, -12, and -14, which are recruited in the G 1 cell cycle stage, are required for stress resistance of extracellular tachyzoites. Thus, although the roles of the different IMC proteins appear to overlap, stage- and development-specific behaviors indicate that their functions are uniquely tailored to each life stage requirement.

Randomized, Phase II Study of the Insulin-Like Growth Factor-1 Receptor Inhibitor IMC-A12, With or Without Cetuximab, in Patients With Cetuximab- or Panitumumab-Refractory Metastatic Colorectal Cancer

PubMed Central

Reidy, Diane Lauren; Vakiani, Efsevia; Fakih, Marwan G.; Saif, Muhammad Wasif; Hecht, Joel Randolph; Goodman-Davis, Noah; Hollywood, Ellen; Shia, Jinru; Schwartz, Jonathan; Chandrawansa, Kumari; Dontabhaktuni, Aruna; Youssoufian, Hagop; Solit, David B.; Saltz, Leonard B.

2010-01-01

Purpose To evaluate the safety and efficacy of IMC-A12, a human monoclonal antibody (mAb) that blocks insulin-like growth factor receptor-1 (IGF-1R), as monotherapy or in combination with cetuximab in patients with metastatic refractory anti–epidermal growth factor receptor (EGFR) mAb colorectal cancer. Methods A randomized, phase II study was performed in which patients in arm A received IMC-A12 10 mg/kg intravenously (IV) every 2 weeks, while patients in arm B received this same dose of IMC-A12 plus cetuximab 500 mg/m2 IV every 2 weeks. Subsequently, arm C (same combination treatment as arm B) was added to include patients who had disease control on a prior anti-EGFR mAb and wild-type KRAS tumors. Archived pretreatment tumor tissue was obtained when possible for KRAS, PIK3CA, and BRAF genotyping, and immunohistochemistry was obtained for pAKT as well as IGF-1R. Results Overall, 64 patients were treated (median age, 61 years; range, 40 to 84 years): 23 patients in arm A, 21 in arm B, and 20 in arm C. No antitumor activity was seen in the 23 patients treated with IMC-A12 monotherapy. Of the 21 patients randomly assigned to IMC-A12 plus cetuximab, one patient (with KRAS wild type) achieved a partial response, with disease control lasting 6.5 months. Arm C (all patients with KRAS wild type), however, showed no additional antitumor activity. Serious adverse events thought possibly related to IMC-A12 included a grade 2 infusion-related reaction (2%; one of 64 patients), thrombocytopenia (2%; one of 64 patients), grade 3 hyperglycemia (2%; one of 64 patients), and grade 1 pyrexia (2%, one of 64 patients). Conclusion IMC-A12 alone or in combination with cetuximab was insufficient to warrant additional study in patients with colorectal cancer refractory to EGFR inhibitors. PMID:20713879

Influence of the volume-contact area ratio on the growth behavior of the Cu-Sn intermetallic phase

NASA Astrophysics Data System (ADS)

Giddaluri, Venkatakamakshi Supraja

Solder Joints play a very important role in electronic packaging industry by serving as mechanical support and provides integrity to the device. The increasing demand for high performance, environmental and economic feasibility and miniaturization led to the development of high density interconnects. With the reduction in the size/standoff height of the solder reliability issues in the surface mount assemblies and packaging structures under various rigorous environments are becoming significant. One of the most important impact factors that affect the solder joint reliability is the growth rate IMC formed between the solder and substrate with reduction in joint size. IMC formation is required to ensure good bonding and connectivity of the device in packaging. However excess IMC growth rate is detrimental to the device from mechanical aspects due to its brittle nature. Thus there is a need to study effect the IMC growth rate behavior with the solder joint size/standoff height. In this present study, two solder joints of different standoff heights and same composition (pure Sn solder) are used subjected to reflow process at 270°C for 1--7 min to study solid liquid interfacial reaction on joint size and the same experiment is repeated with SAC alloy of composition (96.5% Sn, 3.0% Ag, 0.5% Cu) to investigate the effect of joint size and initial copper concentration on IMC growth rate. The IMC thickness of the Sn 15microm solder joint at 1 min and 7 min is found to be 1.52microm and 2.86microm respectively while that of Sn 150microm solder joint is 1.31microm and 3.16 microm. The thickness is high in low standoff height sample at the early stage of reaction with decrease in IMC growth rate as the time of reflow increases. In case of 25microm SAC alloy solder joint the IMC thickness from 1 and 7 min is found to be 2.1microm and 3.5microm while that of 250microm SAC alloy solder joint its 1.43microm and3.235microm. Similar trend is observed but the IMC thickness is more in SAC alloy compared to Pure Sn due to initial Cu concentration effect. The CGC model is applied for growth kinetics of IMC formation and is in well agreement with the experimental results. It is found that the low standoff height solder joint follow t1/3 law and high standoff height solder joint deviates from the t1/3 due to unsaturation. The pure Sn solder of two different standoff heights is also subjected to isothermal aging tests at 120°C for 0--600 hours to investigate the effect of IMC growth rate on solder joint size in solid state diffusion. It has been found that low solder joint height is having high growth rate compared to high standoff height joint and it is found to obey parabolic law and follow reaction diffusion control mechanism.

GOES I/M image navigation and registration

NASA Technical Reports Server (NTRS)

Fiorello, J. L., Jr.; Oh, I. H.; Kelly, K. A.; Ranne, L.

1989-01-01

Image Navigation and Registration (INR) is the system that will be used on future Geostationary Operational Environmental Satellite (GOES) missions to locate and register radiometric imagery data. It consists of a semiclosed loop system with a ground-based segment that generates coefficients to perform image motion compensation (IMC). The IMC coefficients are uplinked to the satellite-based segment, where they are used to adjust the displacement of the imagery data due to movement of the imaging instrument line-of-sight. The flight dynamics aspects of the INR system is discussed in terms of the attitude and orbit determination, attitude pointing, and attitude and orbit control needed to perform INR. The modeling used in the determination of orbit and attitude is discussed, along with the method of on-orbit control used in the INR system, and various factors that affect stability. Also discussed are potential error sources inherent in the INR system and the operational methods of compensating for these errors.

Interfacial Reaction During Dissimilar Joining of Aluminum Alloy to Magnesium and Titanium Alloys

NASA Astrophysics Data System (ADS)

Robson, J. D.; Panteli, A.; Zhang, C. Q.; Baptiste, D.; Cai, E.; Prangnell, P. B.

Ultrasonic welding (USW), a solid state joining process, has been used to produce welds between AA6111 aluminum alloy and AZ31 magnesium alloys or titanium alloy Ti-6Al-4V. The mechanical properties of the welds have been assessed and it has been shown that it is the nature and thickness of the intermetallic compounds (IMCs) at the joint line that are critical in determining joint strength and particularly fracture energy. Al-Mg welds suffer from a very low fracture energy, even when strength is comparable with that of similar metal Mg-Mg welds, due to a thick IMC layer always being formed. It is demonstrated that in USW of Al-Ti alloy the slow interdiffusion kinetics means that an IMC layer does not form during welding, and fracture energy is greater. A model has been developed to predict IMC formation during welding and provide an understanding of the critical factors that determine the IMC thickness. It is predicted that in Al-Mg welds, most of the lMC thickening occurs whilst the IMC regions grow as separate islands, prior to the formation of a continuous layer.

Effects of Electrical Current and External Stress on the Electromigration of Intermetallic Compounds Between the Flip-Chip Solder and Copper Substrate

NASA Astrophysics Data System (ADS)

Chen, Wei-Jhen; Lee, Yue-Lin; Wu, Ti-Yuan; Chen, Tzu-Ching; Hsu, Chih-Hui; Lin, Ming-Tzer

2018-01-01

This study investigated the effects of electric current and external stress on electromigration of intermetallic compounds (IMC) between solder and copper substrate. Different samples were tested under three different sets of conditions: (1) thermal aging only, (2) thermal aging with electric current ,where resistivity changes were measured using four-point probe measurements, (3) thermal aging with electric current and external stress provided using a four-point bending apparatus. The micro-structural changes in the samples were observed. The results were closely examined; particularly the coupling effect of electric current and external stress to elucidate the electromigration mechanism, as well as the formation of IMC in the samples. For thermal-aging-only samples, the IMC growth mechanism was controlled by grain boundary diffusion. Meanwhile, for thermal aging and applied electric current samples, the IMC growth mechanism was dominated by volume diffusion and interface reaction. Lastly, the IMC growth mechanism in the electric current and external stress group was dominated by grain boundary diffusion with grain growth. The results reveal that the external stress/strain and electric current play a significant role in the electromigration of copper-tin IMC. The samples exposed to tensile stress have reduced electromigration, while those subjected under compressive stress have enhanced electromigration.

Performance Monitoring of Diabetic Patient Systems

DTIC Science & Technology

2001-10-25

a process delay that is due to the dynamics of the glucose sensor. A. Bergman Model The Bergman and AIDA models both utilize a \\minimal model...approxima- tion of the process must be made to achieve reasonable performance. A rst order approximation, ~g(s), of both the Bergman and AIDA models is...Within the IMC framework, both the Bergman and AIDA models can be controlled within acceptable toler- ances. The simulated faults are stochastic

A famciclovir + celecoxib combination treatment is safe and efficacious in the treatment of fibromyalgia

PubMed Central

Pridgen, William L; Duffy, Carol; Gendreau, Judy F; Gendreau, R Michael

2017-01-01

Objective Infections and other stressors have been implicated in the development of fibromyalgia. We hypothesized that these stressors could result in recurrent reactivations of latent herpes virus infections, which could lead to the development of fibromyalgia. This study evaluated a famciclovir + celecoxib drug combination (IMC-1), active against suspected herpes virus reactivation and infection, for the treatment of fibromyalgia. Methods A total of 143 fibromyalgia patients were enrolled at 12 sites in a 16-week, double-blinded, placebo-controlled proof-of-concept trial. Randomized patients received either IMC-1 or placebo in a 1:1 ratio. Outcome measures included a 24-hour recall pain Numerical Rating Scale, the Revised Fibromyalgia Impact Questionnaire (FIQ-R), the Patient’s Global Impression of Change (PGIC) questionnaire, the Multidimensional Fatigue Inventory, the NIH Patient-Reported Outcomes Measurement Information System (PROMIS), and the Beck Depression Inventory-II conducted at baseline and weeks 6, 12, and 16 of the study. Results A significant decrease in fibromyalgia-related pain was observed for patients on IMC-1 treatment versus placebo. PGIC response rates were significantly improved with IMC-1 treatment. Overall, patient self-reported functioning, as measured by the FIQ-R, was significantly improved. Fatigue was also significantly improved as measured by the PROMIS fatigue inventory. The safety profile was encouraging. Despite the celecoxib component of IMC-1, gastrointestinal and nervous system treatment emergent adverse events were reported less frequently in the IMC-1 group, and study completion rates favored IMC-1 treatment. Conclusion IMC-1 was efficacious and safe in treating symptoms of fibromyalgia, supporting the hypothesis that herpes virus infections may contribute to this syndrome. Improved retention rates, decreased adverse event rates, and evidence of efficacy on a broad spectrum of outcome measures are suggestive that IMC-1 may represent an effective, novel treatment for fibromyalgia. PMID:28260944

Simulation evaluation of two VTOL control/display systems in IMC approach and shipboard landing

NASA Technical Reports Server (NTRS)

Merrick, V. K.

1984-01-01

Two control/display systems, which differed in overall complexity but were both designed for VTOL flight operations to and from small ships in instrument meteorological conditions (IMC), were tested using the Ames Flight Simulator for Advanced Aircraft (FSAA). Both systems have attitude command in transition and horizontal-velocity command in hover; the more complex system also has longitudinal-acceleration and flightpath-angle command in transition, and vertical-velocity command in hover. The most important overall distinction between the two systems for the viewpoint of implementation is that in one - the more complex - engine power and nozzle position are operated indirectly through flight controllers, whereas in the other they are operated directly by the pilot. Simulated landings were made on a moving model of a DD 963 Spruance-class destroyer. Acceptable transitions can be performed in turbulence of 3 m/sec rms using either system. Acceptable landings up to sea state 6 can be performed using the more complex system, and up to sea state 5 using the other system.

The iterative thermal emission method: A more implicit modification of IMC

DOE PAGES

Long, A. R.; Gentile, N. A.; Palmer, T. S.

2014-08-19

For over 40 years, the Implicit Monte Carlo (IMC) method has been used to solve challenging problems in thermal radiative transfer. These problems typically contain regions that are optically thick and diffusive, as a consequence of the high degree of “pseudo-scattering” introduced to model the absorption and reemission of photons from a tightly-coupled, radiating material. IMC has several well-known features that could be improved: a) it can be prohibitively computationally expensive, b) it introduces statistical noise into the material and radiation temperatures, which may be problematic in multiphysics simulations, and c) under certain conditions, solutions can be nonphysical, in thatmore » they violate a maximum principle, where IMC-calculated temperatures can be greater than the maximum temperature used to drive the problem.« less

Development of a Fully Human Anti-PDGFRβ Antibody That Suppresses Growth of Human Tumor Xenografts and Enhances Antitumor Activity of an Anti-VEGFR2 Antibody

PubMed Central

Shen, Juqun; Vil, Marie Danielle; Prewett, Marie; Damoci, Chris; Zhang, Haifan; Li, Huiling; Jimenez, Xenia; Deevi, Dhanvanthri S; Iacolina, Michelle; Kayas, Anthony; Bassi, Rajiv; Persaud, Kris; Rohoza-Asandi, Anna; Balderes, Paul; Loizos, Nick; Ludwig, Dale L; Tonra, James; Witte, Larry; Zhu, Zhenping

2009-01-01

Platelet-derived growth factor receptor β (PDGFRβ) is upregulated in most of solid tumors. It is expressed by pericytes/smooth muscle cells, fibroblast, macrophage, and certain tumor cells. Several PDGF receptor-related antagonists are being developed as potential antitumor agents and have demonstrated promising antitumor activity in both preclinical and clinical settings. Here, we produced a fully human neutralizing antibody, IMC-2C5, directed against PDGFRβ from an antibody phage display library. IMC-2C5 binds to both human and mouse PDGFRβ and blocks PDGF-B from binding to the receptor. IMC-2C5 also blocks ligand-stimulated activation of PDGFRβ and downstream signaling molecules in tumor cells. In animal studies, IMC-2C5 significantly delayed the growth of OVCAR-8 and NCI-H460 human tumor xenografts in nude mice but failed to show antitumor activities in OVCAR-5 and Caki-1 xenografts. Our results indicate that the antitumor efficacy of IMC-2C5 is primarily due to its effects on tumor stroma, rather than on tumor cells directly. Combination of IMC-2C5 and DC101, an anti-mouse vascular endothelial growth factor receptor 2 antibody, resulted in significantly enhanced antitumor activity in BxPC-3, NCI-H460, and HCT-116 xenografts, compared with DC101 alone, and the trend of additive effects to DC101 treatment in several other tumor models. ELISA analysis of NCI-H460 tumor homogenates showed that IMC-2C5 attenuated protein level of vascular endothelial growth factor and basic fibroblast growth factor elevated by DC101 treatment. Finally, IMC-2C5 showed a trend of additive effects when combined with DC101/chemotherapy in MIA-PaCa-2 and NCI-H460 models. Taken together, these results lend great support to the use of PDGFRβ antagonists in combination with other antiangiogenic agents in the treatment of a broad range of human cancers. PMID:19484148

Idiopathic slow transit constipation and megacolon are not associated with neurturin mutations.

PubMed

Chen, B; Knowles, C H; Scott, M; Anand, P; Williams, N S; Milbrandt, J; Tam, P K H

2002-10-01

Chronic idiopathic slow-transit constipation (ISTC) and idiopathic megacolon (IMC) are early-onset gastrointestinal motility disorders of unknown aetiology. The gene encoding the neurotrophic factor neurturin may be a candidate for these disorders, as neurturin-deficient mice have a similar enteric phenotype. In the present study, we tested this hypothesis. Genomic DNA from 26 cases of chronic idiopathic STC [with a family history of constipation in 15 (58%) and Hirschsprung's disease in two (8%)], and five cases of IMC [two familial (40%)] was screened by direct DNA sequencing using the fluorescent dideoxy terminator method. Results were compared with published sequence data and 24 control DNAs. Our results revealed several previously unreported common sequence polymorphisms, but overall frequencies were comparable between patients and controls. We conclude that mutation of neurturin is not a frequent cause of ISTC or IMC.

Functional analysis of propeptide as an intramolecular chaperone for in vivo folding of subtilisin nattokinase.

PubMed

Jia, Yan; Liu, Hui; Bao, Wei; Weng, Meizhi; Chen, Wei; Cai, Yongjun; Zheng, Zhongliang; Zou, Guolin

2010-12-01

Here, we show that during in vivo folding of the precursor, the propeptide of subtilisin nattokinase functions as an intramolecular chaperone (IMC) that organises the in vivo folding of the subtilisin domain. Two residues belonging to β-strands formed by conserved regions of the IMC are crucial for the folding of the subtilisin domain through direct interactions. An identical protease can fold into different conformations in vivo due to the action of a mutated IMC, resulting in different kinetic parameters. Some interfacial changes involving conserved regions, even those induced by the subtilisin domain, blocked subtilisin folding and altered its conformation. Insight into the interaction between the subtilisin and IMC domains is provided by a three-dimensional structural model. Copyright © 2010 Federation of European Biochemical Societies. Published by Elsevier B.V. All rights reserved.

Strength Gains by Motor Imagery with Different Ratios of Physical to Mental Practice

PubMed Central

Reiser, Mathias; Büsch, Dirk; Munzert, Jörn

2011-01-01

The purpose of this training study was to determine the magnitude of strength gains following a high-intensity resistance training (i.e., improvement of neuromuscular coordination) that can be achieved by imagery of the respective muscle contraction imagined maximal isometric contraction (IMC training). Prior to the experimental intervention, subjects completed a 4-week standardized strength training program. 3 groups with different combinations of real maximum voluntary contraction (MVC) and mental (IMC) strength training (M75, M50, M25; numbers indicate percentages of mental trials) were compared to a MVC-only training group (M0) and a control condition without strength training (CO). Training sessions (altogether 12) consisted of four sets of two maximal 5-s isometric contractions with 10 s rest between sets of either MVC or IMC training. Task-specific effects of IMC training were tested in four strength exercises commonly used in practical settings (bench pressing, leg pressing, triceps extension, and calf raising). Maximum isometric voluntary contraction force (MVC) was measured before and after the experimental training intervention and again 1 week after cessation of the program. IMC groups (M25, M50, M75) showed slightly smaller increases in MVC (3.0% to 4.2%) than M0 (5.1%), but significantly stronger improvements than CO (−0.2%). Compared to further strength gains in M0 after 1 week (9.4% altogether), IMC groups showed no “delayed” improvement, but the attained training effects remained stable. It is concluded that high-intensity strength training sessions can be partly replaced by IMC training sessions without any considerable reduction of strength gains. PMID:21897826

Effects of immunocastration and a β-adrenergic agonist on retail cuts of feedlot finished Nellore cattle.

PubMed

Brigida, D J; Antonelo, D S; Mazon, M R; Nubiato, K E Z; Gómez, J F M; Netto, A S; Leme, P R; Cônsolo, N R B; Pesce, D M C; Silva, S L

2017-12-19

Immunocastration (ImC) has been proposed as an animal welfare-friendly alternative to reduce sexual and aggressive behavior and to increase carcass fat deposition with positive effects on meat quality. The β-adrenergic agonists (β-AA) are known as repartitioning agents that acts increasing lean tissue deposition. The combined use of these technologies can positively affect meat quality and increase retail cuts yield. Thus, this research was conducted to evaluate the combined effects of ImC and β-AA (zilpaterol hydrochloride (ZH) and ractopamine hydrochloride (RH)) on retail cuts, bones, and fat trim of feedlot finished Bos indicus (Nellore) cattle. No interaction was observed between sexual condition and diet for any trait. The ImC decreased cold carcass, hindquarter (HQ), forequarter (FQ) and combined brisket, short ribs and flank (BSF) weights. The ImC also showed smaller weights of retail cuts and bones on the HQ and on the FQ than non-castrated (NoC). Fat trim weights did not differ from ImC and NoC. The most of subprimal cuts were heavier in NoC than in ImC. Feeding β-AA did not affect cold carcass weight; however, animals fed ZH had higher weights of HQ and retail cuts in HQ when compared with RH and control (CO) group, with no differences between RH and CO for both traits. The weights of FQ, BSF, retail cuts in FQ, as well as bones and fat trimmings were not affected by β-AA. In summary, ImC decreases carcass and retail cut weights, whereas ZH supplementation leads to an improvement in carcass lean tissue and retail cuts.

Interfacial Reaction and IMC Growth of an Ultrasonically Soldered Cu/SAC305/Cu Structure during Isothermal Aging

PubMed Central

Long, Weifeng; Hu, Xiaowu; Fu, Yanshu

2018-01-01

In order to accelerate the growth of interfacial intermetallic compound (IMC) layers in a soldering structure, Cu/SAC305/Cu was first ultrasonically spot soldered and then subjected to isothermal aging. Relatively short vibration times, i.e., 400 ms and 800 ms, were used for the ultrasonic soldering. The isothermal aging was conducted at 150 °C for 0, 120, 240, and 360 h. The evolution of microstructure, the IMC layer growth mechanism during aging, and the shear strength of the joints after aging were systemically investigated. Results showed the following. (i) Formation of intermetallic compounds was accelerated by ultrasonic cavitation and streaming effects, the thickness of the interfacial Cu6Sn5 layer increased with aging time, and a thin Cu3Sn layer was identified after aging for 360 h. (ii) The growth of the interfacial IMC layer of the ultrasonically soldered Cu/SAC305/Cu joints followed a linear function of the square root of the aging time, revealing a diffusion-controlled mechanism. (iii) The tensile shear strength of the joint decreased to a small extent with increasing aging time, owing to the combined effects of IMC grain coarsening and the increase of the interfacial IMC. (iv) Finally, although the fracture surfaces and failure locations of the joint soldered with 400 ms and 800 ms vibration times show similar characteristics, they are influenced by the aging time. PMID:29316625

Mechanical Strength and Failure Characterization of Sn-Ag-Cu Intermetallic Compound Joints at the Microscale

NASA Astrophysics Data System (ADS)

Ladani, Leila; Razmi, Jafar

2012-03-01

Continuous miniaturization of microelectronic devices has led the industry to develop interconnects on the order of a few microns for advanced superhigh-density and three-dimensional integrated circuits (3D ICs). At this scale, interconnects that conventionally consist of solder material will completely transform to intermetallic compounds (IMCs) such as Cu6Sn5. IMCs are brittle, unlike conventional solder materials that are ductile in nature; therefore, IMCs do not experience large amounts of plasticity or creep before failure. IMCs have not been fully characterized, and their mechanical and thermomechanical reliability is questioned. This study presents experimental efforts to characterize such material. Sn-based microbonds are fabricated in a controlled environment to assure complete transformation of the bonds to Cu6Sn5 IMC. Microstructural analysis including scanning electron microscopy (SEM), energy-dispersive x-ray spectroscopy (EDS), and x-ray diffraction (XRD) is utilized to determine the IMC material composition and degree of copper diffusion into the bond area. Specimens are fabricated with different bond thicknesses and in different configurations for various tests. Normal strength of the bonds is measured utilizing double cantilever beam and peeling tests. Shear tests are conducted to quantify the shear strength of the material. Four-point bending tests are conducted to measure the fracture toughness and critical energy release rate. Bonds are fabricated in different sizes, and the size effect is investigated. The shear strength, normal strength, critical energy release rate, and effect of bond size on bond strength are reported.

Neural control of fast nonlinear systems--application to a turbocharged SI engine with VCT.

PubMed

Colin, Guillaume; Chamaillard, Yann; Bloch, Gérard; Corde, Gilles

2007-07-01

Today, (engine) downsizing using turbocharging appears as a major way in reducing fuel consumption and pollutant emissions of spark ignition (SI) engines. In this context, an efficient control of the air actuators [throttle, turbo wastegate, and variable camshaft timing (VCT)] is needed for engine torque control. This paper proposes a nonlinear model-based control scheme which combines separate, but coordinated, control modules. Theses modules are based on different control strategies: internal model control (IMC), model predictive control (MPC), and optimal control. It is shown how neural models can be used at different levels and included in the control modules to replace physical models, which are too complex to be online embedded, or to estimate nonmeasured variables. The results obtained from two different test benches show the real-time applicability and good control performance of the proposed methods.

Probabilistic Swarm Guidance using Optimal Transport

DTIC Science & Technology

2014-10-10

controlled to collectively exhibit useful emergent behavior [2]–[5]. Similarly, swarms of hundreds to thousands of femtosatellites (100-gram-class...algorithm using inhomo- geneous Markov chains (PSG– IMC ), each agent chooses the tuning parameter (ξjk) based on the Hellinger distance (HD) between the...PGA and PSG– IMC in the next section. B. Simulation Results We now present the setup of this simulation example. The swarm containing m = 5000 agents is

Annual Statement of Assurance. Fiscal Year 1991

DTIC Science & Technology

1991-01-01

risk) assessment rating process. In orientation sessions, we made a pointed effort to emphasize the statutory root of the IMC Program. We undertook... rating process. Training in the development of the management control plan was also provided using examples and a sample format. To illustrate the...application of IMC principles to the risk rating process, a case study approach was presented in a workshop mode with questions and answers following

A Review of Dissimilar Welding Techniques for Magnesium Alloys to Aluminum Alloys.

PubMed

Liu, Liming; Ren, Daxin; Liu, Fei

2014-05-08

Welding of dissimilar magnesium alloys and aluminum alloys is an important issue because of their increasing applications in industries. In this document, the research and progress of a variety of welding techniques for joining dissimilar Mg alloys and Al alloys are reviewed from different perspectives. Welding of dissimilar Mg and Al is challenging due to the formation of brittle intermetallic compound (IMC) such as Mg 17 Al 12 and Mg₂Al₃. In order to increase the joint strength, three main research approaches were used to eliminate or reduce the Mg-Al intermetallic reaction layer. First, solid state welding techniques which have a low welding temperature were used to reduce the IMCs. Second, IMC variety and distribution were controlled to avoid the degradation of the joining strength in fusion welding. Third, techniques which have relatively controllable reaction time and energy were used to eliminate the IMCs. Some important processing parameters and their effects on weld quality are discussed, and the microstructure and metallurgical reaction are described. Mechanical properties of welds such as hardness, tensile, shear and fatigue strength are discussed. The aim of the report is to review the recent progress in the welding of dissimilar Mg and Al to provide a basis for follow-up research.

A Review of Dissimilar Welding Techniques for Magnesium Alloys to Aluminum Alloys

PubMed Central

Liu, Liming; Ren, Daxin; Liu, Fei

2014-01-01

Welding of dissimilar magnesium alloys and aluminum alloys is an important issue because of their increasing applications in industries. In this document, the research and progress of a variety of welding techniques for joining dissimilar Mg alloys and Al alloys are reviewed from different perspectives. Welding of dissimilar Mg and Al is challenging due to the formation of brittle intermetallic compound (IMC) such as Mg17Al12 and Mg2Al3. In order to increase the joint strength, three main research approaches were used to eliminate or reduce the Mg-Al intermetallic reaction layer. First, solid state welding techniques which have a low welding temperature were used to reduce the IMCs. Second, IMC variety and distribution were controlled to avoid the degradation of the joining strength in fusion welding. Third, techniques which have relatively controllable reaction time and energy were used to eliminate the IMCs. Some important processing parameters and their effects on weld quality are discussed, and the microstructure and metallurgical reaction are described. Mechanical properties of welds such as hardness, tensile, shear and fatigue strength are discussed. The aim of the report is to review the recent progress in the welding of dissimilar Mg and Al to provide a basis for follow-up research. PMID:28788646

Instructional Materials Centers; Annotated Bibliography.

ERIC Educational Resources Information Center

Poli, Rosario, Comp.

An annotated bibliography lists 74 articles and reports on instructional materials centers (IMC) which appeared from 1967-70. The articles deal with such topics as the purposes of an IMC, guidelines for setting up an IMC, and the relationship of an IMC to technology. Most articles deal with use of an IMC on an elementary or secondary level, but…

PDSS/IMC requirements and functional specifications

NASA Technical Reports Server (NTRS)

1983-01-01

The system (software and hardware) requirements for the Payload Development Support System (PDSS)/Image Motion Compensator (IMC) are provided. The PDSS/IMC system provides the capability for performing Image Motion Compensator Electronics (IMCE) flight software test, checkout, and verification and provides the capability for monitoring the IMC flight computer system during qualification testing for fault detection and fault isolation.

Physical climatology of Indonesian maritime continent: An outline to comprehend observational studies

NASA Astrophysics Data System (ADS)

Yamanaka, Manabu D.

2016-09-01

The Indonesian maritime continent (IMC) is a miniature of our land-sea coexisting planet Earth. Firstly, without interior activity, the Earth becomes an even-surfaced "aqua-planet" with both atmosphere and ocean flowing almost zonally, and solar differential heating generates (global thermal tides and) Hadley's meridional circulations with the inter-tropical convergence zone (ITCZ) along the equator as observed actually over the open (Indian and Pacific) oceans on the both sides of the IMC. The ITCZ involves intraseasonal variations or super cloud clusters moving eastward with hierarchical substructures moving also westward. Secondly, the lands and seas over the actual Earth have been keeping the area ratio of 3:7 (similar to that of islands and inland/surrounding seas in the IMC), but their displacements have produced the IMC near the equator, which turns equatorial Pacific easterly ocean current northward (Kuroshio) and reflects equatorial oceanic waves that affect coupled ocean-atmosphere interannual variations such as ENSO and IOD, or displacements of Walker's zonal circulations. Thirdly, because the IMC consists of many large/small islands with very long coastlines, many narrow straits control the global (Pacific to Indian) ocean circulation, and the land-sea heat capacity contrasts along the coastlines generate the world's largest rainfall with diurnal cycles (sea-land breeze circulations). The diurnal cycles are dominant even in the rainy season (austral summer in Jawa and Bali), because rainfall-induced sprinkler-like land cooling reverses the trans-coastal temperature gradient before sunrise, and subsequent clear sky on land until around noon provides solar heating dependent on season. These processes lead to rapid land/hydrosphere-atmosphere water exchange, local air pollutant washout, and transequatorial boreal winter monsoon (cold surge). In El Niño years, for example, the cooler sea-surface temperature suppresses the morning coastal-sea rainfall, and induces often serious smog diffused from land over the IMC. Lastly, high-resolution observations/models covering both over islands and seas are necessary. A radar-profiler network (HARIMAU) has been constructed during FY2005-09, and capacity building on radar operations and buoy manufacturing has been promoted during FY2009-13 by Japan-Indonesia collaboration projects, which are taken over by an Indonesian national center (MCCOE) established in November 2013. Through these projects, variabilities of local circulations and precipitations with diurnal cycles have been recognized as important targets both in science and application.

Thermal analysis and FTIR spectral curve-fitting investigation of formation mechanism and stability of indomethacin-saccharin cocrystals via solid-state grinding process.

PubMed

Zhang, Gang-Chun; Lin, Hong-Liang; Lin, Shan-Yang

2012-07-01

The cocrystal formation of indomethacin (IMC) and saccharin (SAC) by mechanical cogrinding or thermal treatment was investigated. The formation mechanism and stability of IMC-SAC cocrystal prepared by cogrinding process were explored. Typical IMC-SAC cocrystal was also prepared by solvent evaporation method. All the samples were identified and characterized by using differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) microspectroscopy with curve-fitting analysis. The physical stability of different IMC-SAC ground mixtures before and after storage for 7 months was examined. The results demonstrate that the stepwise measurements were carried out at specific intervals over a continuous cogrinding process showing a continuous growth in the cocrystal formation between IMC and SAC. The main IR spectral shifts from 3371 to 3,347 cm(-1) and 1693 to 1682 cm(-1) for IMC, as well as from 3094 to 3136 cm(-1) and 1718 to 1735 cm(-1) for SAC suggested that the OH and NH groups in both chemical structures were taken part in a hydrogen bonding, leading to the formation of IMC-SAC cocrystal. A melting at 184 °C for the 30-min IMC-SAC ground mixture was almost the same as the melting at 184 °C for the solvent-evaporated IMC-SAC cocrystal. The 30-min IMC-SAC ground mixture was also confirmed to have similar components and contents to that of the solvent-evaporated IMC-SAC cocrystal by using a curve-fitting analysis from IR spectra. The thermal-induced IMC-SAC cocrystal formation was also found to be dependent on the temperature treated. Different IMC-SAC ground mixtures after storage at 25 °C/40% RH condition for 7 months had an improved tendency of IMC-SAC cocrystallization. Copyright © 2012 Elsevier B.V. All rights reserved.

PID tuning rules for SOPDT systems: review and some new results.

PubMed

Panda, Rames C; Yu, Cheng-Ching; Huang, Hsiao-Ping

2004-04-01

PID controllers are widely used in industries and so many tuning rules have been proposed over the past 50 years that users are often lost in the jungle of tuning formulas. Moreover, unlike PI control, different control laws and structures of implementation further complicate the use of the PID controller. In this work, five different tuning rules are taken for study to control second-order plus dead time systems with wide ranges of damping coefficients and dead time to time constant ratios (D/tau). Four of them are based on IMC design with different types of approximations on dead time and the other on desired closed-loop specifications (i.e., specified forward transfer function). The method of handling dead time in the IMC type of design is important especially for systems with large D/tau ratios. A systematic approach was followed to evaluate the performance of controllers. The regions of applicability of suitable tuning rules are highlighted and recommendations are also given. It turns out that IMC designed with the Maclaurin series expansion type PID is a better choice for both set point and load changes for systems with D/tau greater than 1. For systems with D/tau less than 1, the desired closed-loop specification approach is favored.

Reflight certification software design specifications

NASA Technical Reports Server (NTRS)

1984-01-01

The PDSS/IMC Software Design Specification for the Payload Development Support System (PDSS)/Image Motion Compensator (IMC) is contained. The PDSS/IMC is to be used for checkout and verification of the IMC flight hardware and software by NASA/MSFC.

Interfacial interaction track of amorphous solid dispersions established by water-soluble polymer and indometacin.

PubMed

Li, Jing; Fan, Na; Wang, Xin; Li, Chang; Sun, Mengchi; Wang, Jian; Fu, Qiang; He, Zhonggui

2017-08-30

The present work studied interfacial interactions of amorphous solid dispersions matrix of indometacin (IMC) that established using PVP K30 (PVP) and PEG 6000 (PEG) by focusing on their interaction forces and wetting process. Infrared spectroscopy (IR), raman spectroscopy, X-ray photoelectron spectra and contact angle instrument were used throughout the study. Hydrogen bond energy formed between PEG and IMC were stronger than that of PVP and IMC evidenced by molecular modeling measurement. The blue shift of raman spectroscopy confirmed that hydrogen bonding forces were formed between IMC and two polymers. The contact angle study can be used as an easy method to determine the dissolution mechanism of amorphous solid dispersions through fitting the profile of contact angle of water on a series of tablets. It is believed that the track of interfacial interactions will certainly become powerful tools to for designing and evaluating amorphous solid dispersions. Copyright © 2017 Elsevier B.V. All rights reserved.

Evaluation of a depression screening and treatment program in primary care for patients with diabetes mellitus: insights and future directions.

PubMed

Palmer, Carrie; Vorderstrasse, Allison; Weil, Amy; Colford, Cristin; Dolan-Soto, Diane

2015-03-01

To evaluate a collaborative depression care program by assessing adherence to the program by internal medicine clinic (IMC) staff, and the program's effectiveness in treating depression in patients with diabetes mellitus. We also describe the rate of depression among patients with diabetes in the IMC. Data for this program were obtained from a de-identified disease registry and included 1312 outpatient IMC visits in adult patients with diabetes between March 2011 and September 2011. Collaborative depression care results in high rates of screening for and identification of depression, high rates of antidepressant utilization, and improved depression scores; however, more focused interventions are needed to improve diabetes outcomes in patients with depression and diabetes. The results indicate that the multidisciplinary IMC staff can work together with patients to identify and monitor depression within primary care. This study provides valuable information about models of depression care that can be implemented and evaluated in a clinical setting. ©2014 American Association of Nurse Practitioners.

Mechanical and water soaking properties of medium density fiberboard with wood fiber and soybean protein adhesive.

PubMed

Li, Xin; Li, Yonghui; Zhong, Zhikai; Wang, Donghai; Ratto, Jo A; Sheng, Kuichuan; Sun, Xiuzhi Susan

2009-07-01

Soybean protein is a renewable and abundant material that offers an alternative to formaldehyde-based resins. In this study, soybean protein was modified with sodium dodecyl sulfate (SDS) as an adhesive for wood fiber medium density fiberboard (MDF) preparation. Second-order response surface regression models were used to study the effects and interactions of initial moisture content (IMC) of coated wood fiber, press time (PT) and temperature on mechanical and water soaking properties of MDF. Results showed that IMC of coated fiber was the dominant influencing factor. Mechanical and soaking properties improved as IMC increased and reached their highest point at an IMC of 35%. Press time and temperature also had a significant effect on mechanical and water soaking properties of MDF. Second-order regression results showed that there were strong relationships between mechanical and soaking properties of MDF and processing parameters. Properties of MDF made using soybean protein adhesive are similar to those of commercial board.

[Comparation study of incidental irradiation dose to the internal mammary chain during postmastectomy radiotherapy for patients treated with different irradiation techniques].

PubMed

Wang, W; Meng, Y T; Song, Y F; Sun, T; Xu, M; Shao, Q; Zhang, Y J; Li, J B

2018-05-23

Objective: To evaluated the unplanned coverage dose to the internal mammary chain (IMC) in patient treated with postmastectomy radiotherapy (PMRT). Methods: One hundred and thirty eight patients with breast cancer receiving radiotherapy (RT) in our hospital were retrospectively analyzed. Patients were divided into three groups: three-dimensional conformal radiotherapy (3D-CRT) group, forward intensity-modulated radiotherapy (F-IMRT) group and inverse IMRT (I-IMRT) group. The IMC were contoured according to Radiation Therapy Oncology Group (RTOG) consensus, and were not include into the planning target volume (PTV). The incidental irradiation dose to IMC among the three groups and the first three intercostal spaces IMC (ICS-IMC 1-3) were all compared, and explored the relationship between the mean doses (Dmean) of IMC and the OARs (ipsilateral lung and heart). Results: The dose delivered to IMC showed no difference in CRT, F-IMRT and I-IMRT(33.80 Gy, 29.65 Gy and 32.95 Gy). And 10.42%, 2.04%, and 9.76% patients achieved ≥45 Gy when treated with CRT, F-IMRT and I-IMRT. For the IMC dose in the first three intercostal spaces (ICS1-3), there was no difference to the three treatment plannings. The Dmean, V(20), V(30), V(40) and V(50) of the ICS-IMC2 and ICS-IMC3 were all obviously superior than ICS-IMC1 for all these three plannings. Moderate positive correlation was founded between Dmean for IMC and Dmean for heart for left breast cancer patients underwent CRT ( r =0.338, P =0.01). Whereas for F-IMRT and I-IMRT groups, positive correlation were founded between Dmean for IMC and Dmean and V(20) for ipsilateral lung for all patients (F-IMRT: r =0.366, P =0.010; r =0.318, P =0.026; I-IMRT: r =0.427, P =0.005; r =0.411, P =0.008). Conclusions: In 3D-CRT, F-IMRT and I-IMRT planning methods, partial patients get IMC irradiated doses that could achieve therapeutic doses. Compared with 3D-CRT, F-IMRT and I-IMRT further reduced the dose of irradiated organs. However, there is no difference in the dose coverage of IMC for the three planned approaches when the IMC made an unplanned target.

The failure analysis and lifetime prediction for the solder joint of the magnetic head

NASA Astrophysics Data System (ADS)

Xiao, Xianghui; Peng, Minfang; Cardoso, Jaime S.; Tang, Rongjun; Zhou, YingLiang

2015-02-01

Micro-solder joint (MSJ) lifetime prediction methodology and failure analysis (FA) are to assess reliability by fatigue model with a series of theoretical calculations, numerical simulation and experimental method. Due to shortened time of solder joints on high-temperature, high-frequency sampling error that is not allowed in productions may exist in various models, including round-off error. Combining intermetallic compound (IMC) growth theory and the FA technology for the magnetic head in actual production, this thesis puts forward a new growth model to predict life expectancy for solder joint of the magnetic head. And the impact of IMC, generating from interface reaction between slider (magnetic head, usually be called slider) and bonding pad, on mechanical performance during aging process is analyzed in it. By further researching on FA of solder ball bonding, thesis chooses AuSn4 growth model that affects least to solder joint mechanical property to indicate that the IMC methodology is suitable to forecast the solder lifetime. And the diffusion constant under work condition 60 °C is 0.015354; the solder lifetime t is 14.46 years.

The Effectiveness of Surface Coatings on Preventing Interfacial Reaction During Ultrasonic Welding of Aluminum to Magnesium

NASA Astrophysics Data System (ADS)

Panteli, Alexandria; Robson, Joseph D.; Chen, Ying-Chun; Prangnell, Philip B.

2013-12-01

High power ultrasonic spot welding (USW) is a solid-state joining process that is advantageous for welding difficult dissimilar material couples, like magnesium to aluminum. USW is also a useful technique for testing methods of controlling interfacial reaction in welding as the interface is not greatly displaced by the process. However, the high strain rate deformation in USW has been found to accelerate intermetallic compound (IMC) formation and a thick Al12Mg17 and Al3Mg2 reaction layer forms after relatively short welding times. In this work, we have investigated the potential of two approaches for reducing the IMC reaction rate in dissimilar Al-Mg ultrasonic welds, both involving coatings on the Mg sheet surface to (i) separate the join line from the weld interface, using a 100- μm-thick Al cold spray coating, and (ii) provide a diffusion barrier layer, using a thin manganese physical vapor deposition (PVD) coating. Both methods were found to reduce the level of reaction and increase the failure energy of the welds, but their effectiveness was limited due to issues with coating attachment and survivability during the welding cycle. The effect of the coatings on the joint's interface microstructure, and the fracture behavior have been investigated in detail. Kinetic modeling has been used to show that the benefit of the cold spray coating can be attributed to the reaction rate reverting to that expected under static conditions. This reduces the IMC growth rate by over 50 pct because at the weld line, the high strain rate dynamic deformation in USW normally enhances diffusion through the IMC layer. In comparison, the thin PVD barrier coating was found to rapidly break up early in USW and become dispersed throughout the deformation layer reducing its effectiveness.

Organizing a Learning Center.

ERIC Educational Resources Information Center

Davis, Harold S.

The organization and development of instructional materials centers (IMC's) as a part of a program of educational improvement is discussed. Analysis is made of the advantages, disadvantages, and organization of centralized IMC's, decentralized IMC's, and coordinated IMC's, with recommendations being made for their development. The operation of…

Intrinsic and extrinsic motivations in primary care: an explanatory study among French general practitioners.

PubMed

Sicsic, Jonathan; Le Vaillant, Marc; Franc, Carine

2012-12-01

Like many other OECD nations, France has implemented a pay-for-performance (P4P) model in primary care. However, the benefits have been debated, particularly regarding the possibly undesirable effects of extrinsic motivation (EM) on intrinsic motivation (IM). To examine the relationship between French GPs' IM and EM based on an intrinsic motivation composite score (IMCS) developed for this purpose. If a negative relationship is found, P4P schemes could have side effects on GPs' IM that is a key determinant of quality of care. From data on 423 GPs practicing in a region of France, IM indicators are selected using a multiple correspondence analysis and aggregated from a multilevel model. Several doctors' characteristics have significant impacts on IMCS variability, especially group practice and salaried practice. Qualitative EM variables are negatively correlated with the IMCS: GPs who report not being satisfied with their income or feeling "often" constrained by patients' requests in terms of consultations length and office appointments obtain a lower mean IMCS than other GPs. Our results provide a cautionary message to regulators who should take into account the potential side effects of increasing EM through policies such as P4P. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

Inhibition of intracerebral glioblastoma growth by targeting the insulin-like growth factor 1 receptor involves different context-dependent mechanisms

PubMed Central

Zamykal, Martin; Martens, Tobias; Matschke, Jakob; Günther, Hauke S.; Kathagen, Annegret; Schulte, Alexander; Peters, Regina; Westphal, Manfred; Lamszus, Katrin

2015-01-01

Background Signaling by insulin-like growth factor 1 receptor (IGF-1R) can contribute to the formation and progression of many diverse tumor types, including glioblastoma. We investigated the effect of the IGF-1R blocking antibody IMC-A12 on glioblastoma growth in different in vivo models. Methods U87 cells were chosen to establish rapidly growing, angiogenesis-dependent tumors in the brains of nude mice, and the GS-12 cell line was used to generate highly invasive tumors. IMC-A12 was administered using convection-enhanced local delivery. Tumor parameters were quantified histologically, and the functional relevance of IGF-1R activation was analyzed in vitro. Results IMC-A12 treatment inhibited the growth of U87 and GS-12 tumors by 75% and 50%, respectively. In GS-12 tumors, the invasive tumor extension and proliferation rate were significantly reduced by IMC-A12 treatment, while apoptosis was increased. In IMC-A12–treated U87 tumors, intratumoral vascularization was markedly decreased, and tumor cell proliferation was moderately reduced. Flow cytometry showed that <2% of U87 cells but >85% of GS-12 cells expressed IGF-1R. Activation of IGF-1R by IGF-1 and IGF-2 in GS-12 cells was blocked by IMC-A12. Both ligands stimulated GS-12 cell proliferation, and IGF-2 also stimulated migration. IMC-A12 inhibited these stimulatory effects and increased apoptosis. In U87 cells, stimulation with either ligand had no functional effect. Conclusions IGF-1R blockade can inhibit glioblastoma growth by different mechanisms, including direct effects on the tumor cells as well as indirect anti-angiogenic effects. Hence, blocking IGF-1R may be useful to target both the highly proliferative, angiogenesis-dependent glioblastoma core component as well as the infiltrative periphery. PMID:25543125

An investigation of indomethacin-nicotinamide cocrystal formation induced by thermal stress in the solid or liquid state.

PubMed

Lin, Hong-Liang; Zhang, Gang-Chun; Huang, Yu-Ting; Lin, Shan-Yang

2014-08-01

The impact of thermal stress on indomethacin (IMC)-nicotinamide (NIC) cocrystal formation with or without neat cogrinding was investigated using differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) microspectroscopy, and simultaneous DSC-FTIR microspectroscopy in the solid or liquid state. Different evaporation methods for preparing IMC-NIC cocrystals were also compared. The results indicated that even after cogrinding for 40 min, the FTIR spectra for all IMC-NIC ground mixtures were superimposable on the FTIR spectra of IMC and NIC components, suggesting there was no cocrystal formation between IMC and NIC after cogrinding. However, these IMC-NIC ground mixtures appear to easily undergo cocrystal formation after the application of DSC determination. Under thermal stress induced by DSC, the amount of cocrystal formation increased with increasing cogrinding time. Moreover, simultaneous DSC-FTIR microspectroscopy was a useful one-step technique to induce and clarify the thermal-induced stepwise mechanism of IMC-NIC cocrystal formation from the ground mixture in real time. Different solvent evaporation rates induced by thermal stress significantly influenced IMC-NIC cocrystal formation in the liquid state. In particular, microwave heating may promote IMC-NIC cocrystal formation in a short time. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

In situ study on the effect of thermomigration on intermetallic compounds growth in liquid-solid interfacial reaction

DOE Office of Scientific and Technical Information (OSTI.GOV)

Qu, Lin; Zhao, Ning; Ma, Haitao, E-mail: htma@dlut.edu.cn

2014-05-28

Synchrotron radiation real-time imaging technology was carried out in situ to observe and characterize the effect of thermomigration on the growth behavior of interfacial intermetallic compounds (IMCs) in Cu/Sn/Cu solder joint during soldering. The thermomigration resulted in asymmetrical formation and growth of the interfacial IMCs. Cu{sub 6}Sn{sub 5} and Cu{sub 3}Sn IMCs formed at the cold end and grew rapidly during the whole soldering process. However, only Cu{sub 6}Sn{sub 5} IMC formed at the hot end and remained relatively thin until solidification. The IMCs at the cold end were nearly seven times thicker than that at the hot end aftermore » solidification. The Cu dissolution at the cold end was significantly restrained, while that at the hot end was promoted, which supplied Cu atoms to diffuse toward the cold end under thermomigration to feed the rapid IMC growth. Moreover, the thermomigration also caused asymmetrical morphology of the interfacial IMCs at the cooling stage, i.e., the Cu{sub 6}Sn{sub 5} IMC at the cold end transformed into facet structure, while that at the hot end remained scallop-type. The asymmetrical growth behavior of the interfacial IMCs was analyzed from the view point of kinetics.« less

Effect of Ni addition to the Cu substrate on the interfacial reaction and IMC growth with Sn3.0Ag0.5Cu solder

NASA Astrophysics Data System (ADS)

Zhang, Xudong; Hu, Xiaowu; Jiang, Xiongxin; Li, Yulong

2018-04-01

The formation and growth of intermetallic compound (IMC) layer at the interface between Sn3.0Ag0.5Cu (SAC305) solder and Cu- xNi ( x = 0, 0.5, 1.5, 5, 10 wt%) substrate during reflowing and aging were investigated. The soldering was conducted at 270 °C using reflowing method, following by aging treatment at 150 °C for up to 360 h. The experimental results indicated that the total thickness of IMC increased with increasing aging time. The scallop-like Cu6Sn5 and planar-like Cu3Sn IMC layer were observed between SAC305 solder and purely Cu substrate. As the content of Ni element in Cu substrate was 0.5% or 1.5%, the scallop-like Cu6Sn5 and planar-like Cu3Sn IMC layer were still found between solder and Cu-Ni substrate and the total thickness of IMC layer decreased with the increasing Ni content. Besides, when the Ni content was up to 5%, the long prismatic (Cu,Ni)6Sn5 phase was the only product between solder and substrate and the total thickness of IMC layer increased significantly. Interestingly, the total thickness of IMC decreased slightly as the Ni addition was up to 10%. In the end, the grains of interfacial IMC layer became coarser with aging time increasing while the addition of Ni in Cu substrate could refine IMC grains.

Effect of Mn Nanoparticles on Interfacial Intermetallic Compound Growth in Low-Ag Sn-0.3Ag-0.7Cu- xMn Solder Joints

NASA Astrophysics Data System (ADS)

Tang, Y.; Luo, S. M.; Li, G. Y.; Yang, Z.; Chen, R.; Han, Y.; Hou, C. J.

2018-02-01

Interfacial intermetallic compound (IMC) growth between Cu substrates and low-Ag Sn-0.3Ag-0.7Cu- xMn ( x = 0 wt.%, 0.02 wt.%, 0.05 wt.%, 0.1 wt.%, and 0.15 wt.%) (SAC0307- xMn) solders was investigated under different isothermal aging temperatures of 100°C, 150°C, and 190°C. Scanning electron microscopy (SEM) was employed to observe the microstructural evolution of the solder joints and measure the IMC layer thickness. The IMC phases were identified by energy-dispersive x-ray spectroscopy and x-ray diffraction. The results showed that a Cu6Sn5 IMC layer formed in the as-soldered solder joints, while a duplex structure consisting of a Cu6Sn5 IMC layer near the solder matrix and a Cu3Sn IMC layer was observed after isothermal aging. A considerable drop in the IMC layer thickness was observed when 0.1 wt.% Mn nanoparticles were added. Beyond this amount, the thickness of the IMC layer only slightly increases. Adding Mn nanoparticles can increase the activation energy and thus reduce the interdiffusion rates of the Sn and Cu atoms, which suppresses excessive IMC growth. The solder joint containing 0.1 wt.% Mn nanoparticles has the highest activation energy. SEM images revealed that the number of small particles precipitated in the channels between the Cu6Sn5 IMC layers increases with an increasing proportion of Mn nanoparticles. Based on the microstructural evolution of the solder joints, this study revealed that grain boundary pinning is one of the most important mechanisms for IMC growth inhibition when Mn nanoparticles are added.

Growth of Interfacial Intermetallic Compound Layer in Diffusion-Bonded SAC-Cu Solder Joints During Different Types of Thermomechanical Excursion

NASA Astrophysics Data System (ADS)

Kanjilal, Anwesha; Kumar, Praveen

2018-01-01

The effects of mechanical strain on the growth kinetics of interfacial intermetallic compounds (IMCs) sandwiched between Cu substrate and Sn-1.0 wt.%Ag-0.5 wt.%Cu (SAC105) solder have been investigated. Isothermal aging (IA) at 70°C and 125°C, and thermal cycling (TC) as well as thermomechanical cycling (TMC) with shear strain of 12.8% per cycle between -25°C and 125°C were applied to diffusion-bonded solder joints to study the growth behavior of the interfacial IMC layer under various types of thermomechanical excursion (TME). The microstructure of the solder joint tested under each TME was observed at regular intervals. It was observed that the growth rate of the IMC layer was higher in the case of TMC compared with TC or IA. This increased growth rate of the IMC layer in the presence of mechanical strain suggests an additional driving force that enhances the growth kinetics of the IMC. Finite element analysis was performed to gain insight into the effect of TC and TMC on the stress field in the solder joint, especially near the interface between the solder and the substrate. Finally, an analytical model was developed to quantify the effect of strain on the effective diffusivity and express the growth kinetics for all three types of TME using a single expression.

Quantitative measurement of indomethacin crystallinity in indomethacin-silica gel binary system using differential scanning calorimetry and X-ray powder diffractometry.

PubMed

Pan, Xiaohong; Julian, Thomas; Augsburger, Larry

2006-02-10

Differential scanning calorimetry (DSC) and X-ray powder diffractometry (XRPD) methods were developed for the quantitative analysis of the crystallinity of indomethacin (IMC) in IMC and silica gel (SG) binary system. The DSC calibration curve exhibited better linearity than that of XRPD. No phase transformation occurred in the IMC-SG mixtures during DSC measurement. The major sources of error in DSC measurements were inhomogeneous mixing and sampling. Analyzing the amount of IMC in the mixtures using high-performance liquid chromatography (HPLC) could reduce the sampling error. DSC demonstrated greater sensitivity and had less variation in measurement than XRPD in quantifying crystalline IMC in the IMC-SG binary system.

Nutrient modeling for a semi-intensive IMC pond: an MS-Excel approach.

PubMed

Ray, Lala I P; Mal, B C; Moulick, S

2017-11-01

Semi-intensive Indian Major Carp (IMC) culture was practised in polythene lined dugout ponds at the Aquacultural Farm of Indian Institute of Technology, Kharagpur, West Bengal for 3 consecutive years at three different stocking densities (S.D), viz., 20,000, 35,000 and 50,000 numbers of fingerlings per hectare of water spread area. Fingerlings of Catla, Rohu and Mrigal were raised at a stocking ratio of 4:3:3. Total ammonia nitrogen (TAN) value along with other fishpond water quality parameters was monitored at 1 day intervals to ensure a good water ecosystem for a better fish growth. Water exchange was carried out before the TAN reached the critical limit. Field data on TAN obtained from the cultured fishponds stocked with three different stocking densities were used to study the dynamics of TAN. A developed model used to study the nutrient dynamics in shrimp pond was used to validate the observed data in the IMC pond ecosystem. Two years of observed TAN data were used to calibrate the spreadsheet model and the same model was validated using the third year observed data. The manual calibration based on the trial and error process of parameters adjustments was used and several simulations were performed by changing the model parameters. After adjustment of each parameter, the simulated and measured values of the water quality parameters were compared to judge the improvement in the model prediction. Forward finite difference discretization method was used in a MS-Excel spreadsheet to calibrate and validate the model for obtaining the TAN levels during the culture period. Observed data from the cultured fishponds of three different S.D were used to standardize 13 model parameters. The efficiency of the developed spreadsheet model was found to be more than 90% for the TAN estimation in the IMC cultured fishponds.

Fatigue behavior and life prediction of a SiC/Ti-24Al-11Nb composite under isothermal conditions. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Bartolotta, Paul A.

1991-01-01

Metal Matrix Composites (MMC) and Intermetallic Matrix Composites (IMC) were identified as potential material candidates for advanced aerospace applications. They are especially attractive for high temperature applications which require a low density material that maintains its structural integrity at elevated temperatures. High temperature fatigue resistance plays an important role in determining the structural integrity of the material. This study attempts to examine the relevance of test techniques, failure criterion, and life prediction as they pertain to an IMC material, specifically, unidirectional SiC fiber reinforced titanium aluminide. A series of strain and load controlled fatigue tests were conducted on unidirectional SiC/Ti-24Al-11Nb composite at 425 and 815 C. Several damage mechanism regimes were identified by using a strain-based representation of the data, Talreja's fatigue life diagram concept. Results of these tests were then used to address issues of test control modes, definition of failure, and testing techniques. Finally, a strain-based life prediction method was proposed for an IMC under tensile cyclic loadings at elevated temperatures.

Microstructure and tribological properties of in situ synthesized TiC, TiN, and SiC reinforced Ti 3Al intermetallic matrix composite coatings on pure Ti by laser cladding

NASA Astrophysics Data System (ADS)

Pu, Yuping; Guo, Baogang; Zhou, Jiansong; Zhang, Shitang; Zhou, Huidi; Chen, Jianmin

2008-12-01

TiC, TiN, and SiC reinforced Ti 3Al intermetallic matrix composite (IMC) coatings were in situ synthesized on a pure Ti substrate by laser cladding. It was found that the surface hardness and the wear resistance of the Ti 3Al coating were improved by the formation of these Ti 3Al IMC coatings. The surface hardness and the wear resistance of the TiC/Ti 3Al IMC coatings increased with the increasing volume fraction of TiC powder. Under the same dry sliding test conditions, the wear resistance of TiC, TiN, and SiC reinforced Ti 3Al IMC coatings with 40 vol.% reinforced powder was in the following order: TiN/Ti 3Al IMC coating > TiC/Ti 3Al IMC coating > SiC/Ti 3Al IMC coating. It should be noted that both the TiC/Ti 3Al IMC coating with 40 vol.% TiC powder and the TiN/Ti 3Al coating with 40 vol.% TiN powder showed excellent wear resistance under 5 N normal load.

Possible formation of high temperature superconductor at an early stage of heavy-ion collisions

NASA Astrophysics Data System (ADS)

Liu, Hao; Yu, Lang; Chernodub, Maxim; Huang, Mei

2016-12-01

We investigate the effect of the inverse magnetic catalysis (IMC) on charged ρ meson condensation at finite temperature in the framework of the Nambu-Jona-Lasinio model, where mesons are calculated to the leading order of 1 /Nc expansion. The IMC for chiral condensate has been considered using three different approaches: incorporating the chiral condensate from lattice data, using the running coupling constant, and introducing the chiral chemical potential, respectively. It is observed that with no IMC effect included, the critical magnetic field e Bc for charged ρ condensation increases monotonically with the temperature. However, including IMC substantially affects the polarized charged ρ condensation around the critical temperature Tc of the chiral phase transition: first, the critical magnetic field e Bc for the charged ρ condensation decreases with the temperature, reaches its minimum value around Tc, and then increases with the temperature. It is quite surprising that the charged ρ can condense above the critical temperature of chiral phase transition with a even smaller critical magnetic field comparing its vacuum value. The Nambu-Jona-Lasinio model calculation shows that in the temperature region of 1 - 1.5 Tc , the critical magnetic field for charged ρ condensation is rather small and in the region of e Bc˜0.15 - 0.3 GeV2 , which suggests that high temperature superconductor might be created through noncentral heavy ion collisions at LHC energies.

Microstructural Evolution and Mechanical Behavior of High Temperature Solders: Effects of High Temperature Aging

NASA Astrophysics Data System (ADS)

Hasnine, M.; Tolla, B.; Vahora, N.

2018-04-01

This paper explores the effects of aging on the mechanical behavior, microstructure evolution and IMC formation on different surface finishes of two high temperature solders, Sn-5 wt.% Ag and Sn-5 wt.% Sb. High temperature aging showed significant degradation of Sn-5 wt.% Ag solder hardness (34%) while aging has little effect on Sn-5 wt.% Sb solder. Sn-5 wt.% Ag experienced rapid grain growth as well as the coarsening of particles during aging. Sn-5 wt.% Sb showed a stable microstructure due to solid solution strengthening and the stable nature of SnSb precipitates. The increase of intermetallic compound (IMC) thickness during aging follows a parabolic relationship with time. Regression analysis (time exponent, n) indicated that IMC growth kinetics is controlled by a diffusion mechanism. The results have important implications in the selection of high temperature solders used in high temperature applications.

A dislocation density based micromechanical constitutive model for Sn-Ag-Cu solder alloys

NASA Astrophysics Data System (ADS)

Liu, Lu; Yao, Yao; Zeng, Tao; Keer, Leon M.

2017-10-01

Based on the dislocation density hardening law, a micromechanical model considering the effects of precipitates is developed for Sn-Ag-Cu solder alloys. According to the microstructure of the Sn-3.0Ag-0.5Cu thin films, intermetallic compounds (IMCs) are assumed as sphere particles embedded in the polycrystalline β-Sn matrix. The mechanical behavior of polycrystalline β-Sn matrix is determined by the elastic-plastic self-consistent method. The existence of IMCs not only impedes the motion of dislocations but also increases the overall stiffness. Thus, a dislocation density based hardening law considering non-shearable precipitates is adopted locally for single β-Sn crystal, and the Mori-Tanaka scheme is applied to describe the overall viscoplastic behavior of solder alloys. The proposed model is incorporated into finite element analysis and the corresponding numerical implementation method is presented. The model can describe the mechanical behavior of Sn-3.0Ag-0.5Cu and Sn-1.0Ag-0.5Cu alloys under high strain rates at a wide range of temperatures. Furthermore, the overall Young’s modulus changes due to different contents of IMCs is predicted and compared with experimental data. Results show that the proposed model can describe both elastic and inelastic behavior of solder alloys with reasonable accuracy.

A compound reconstructed prediction model for nonstationary climate processes

NASA Astrophysics Data System (ADS)

Wang, Geli; Yang, Peicai

2005-07-01

Based on the idea of climate hierarchy and the theory of state space reconstruction, a local approximation prediction model with the compound structure is built for predicting some nonstationary climate process. By means of this model and the data sets consisting of north Indian Ocean sea-surface temperature, Asian zonal circulation index and monthly mean precipitation anomaly from 37 observation stations in the Inner Mongolia area of China (IMC), a regional prediction experiment for the winter precipitation of IMC is also carried out. When using the same sign ratio R between the prediction field and the actual field to measure the prediction accuracy, an averaged R of 63% given by 10 predictions samples is reached.

PDSS/IMC qualification test software acceptance procedures

NASA Technical Reports Server (NTRS)

1984-01-01

Tests to be performed for qualifying the payload development support system image motion compensator (IMC) are identified. The performance of these tests will verify the IMC interfaces and thereby verify the qualification test software.

A combinational supercritical CO2 system for nanoparticle preparation of indomethacin.

PubMed

Tozuka, Yuichi; Miyazaki, Yuta; Takeuchi, Hirofumi

2010-02-15

An improved system using both supercritical antisolvent precipitation and rapid expansion from supercritical to aqueous solution (RESAS) was proposed to overcome the problem of low solubility of medicinal substances in scCO(2). When the ethanol solution with IMC was sprayed into the vessel purged with scCO(2), no precipitation of IMC was observed if the CO(2) pressure was more than 15MPa at 40 degrees C. This indicates that very small droplets of the ethanol solution with IMC could disperse in the high pressure CO(2). After expansion into distilled water using an RESAS device, this same solution, in CO(2) at high pressure, produced submicron particles of IMC. For the pharmaceutical application, the IMC suspension was freeze-dried and re-dispersed to the aqueous media. SEM images of freeze-dried sample showed that the suspension was composed of submicron particles with 300-500 nm. Although the average particle size of re-dispersed IMC related significantly to the pressure and temperature in the vessel on scCO(2) processing, the freeze-dried sample of the IMC suspension after the treatment shows good redispersibility as a nanosuspension. This apparatus is found to be a promising way to produce fine crystals of IMC with a high yield. Copyright 2009 Elsevier B.V. All rights reserved.

Immune Reactions in Mucous Membranes

PubMed Central

Miller, H. R. P.; Walshaw, R.

1972-01-01

The histochemistry of intestinal (IMC) and connective tissue mast cells (CTMC) in the normal rat is compared. Acid mucopolysaccharide appears to be less strongly sulfated and the granule content of monoamines is lower in IMC. After infection with the intestinal helminth, Nippostrongylus brasiliensis, the mucosal content of IMC is altered. During the early phase of immunologic expulsion of this parasite (self-cure) the IMC proliferate and differentiate; the histochemical properties of the granules appear to reflect this process. Very large numbers of mature IMC are found in the mucosa during the later, rapid phase of worm expulsion. Both acid mucopolysaccharide and monoamines are depleted from the granules of these cells; this is consistent with previous studies suggesting that IMC discharge occurs at this stage. These findings lend further support to the hypothesis that the biogenic products of IMC discharge are responsible for the increase in mucosal permeability which occurs during self-cure and which may facilitate the rapid translocation of antiworm antibody into the intestinal lumen. ImagesFigs 1 and 2Fig 3Fig 4Fig 5Fig 6 PMID:4117026

The Transcriptional Complex Between the BCL2 i-Motif and hnRNP LL Is a Molecular Switch for Control of Gene Expression That Can Be Modulated by Small Molecules

PubMed Central

2015-01-01

In a companion paper (DOI: 10.021/ja410934b) we demonstrate that the C-rich strand of the cis-regulatory element in the BCL2 promoter element is highly dynamic in nature and can form either an i-motif or a flexible hairpin. Under physiological conditions these two secondary DNA structures are found in an equilibrium mixture, which can be shifted by the addition of small molecules that trap out either the i-motif (IMC-48) or the flexible hairpin (IMC-76). In cellular experiments we demonstrate that the addition of these molecules has opposite effects on BCL2 gene expression and furthermore that these effects are antagonistic. In this contribution we have identified a transcriptional factor that recognizes and binds to the BCL2 i-motif to activate transcription. The molecular basis for the recognition of the i-motif by hnRNP LL is determined, and we demonstrate that the protein unfolds the i-motif structure to form a stable single-stranded complex. In subsequent experiments we show that IMC-48 and IMC-76 have opposite, antagonistic effects on the formation of the hnRNP LL–i-motif complex as well as on the transcription factor occupancy at the BCL2 promoter. For the first time we propose that the i-motif acts as a molecular switch that controls gene expression and that small molecules that target the dynamic equilibrium of the i-motif and the flexible hairpin can differentially modulate gene expression. PMID:24559432

The Transport Equation in Optically Thick Media: Discussion of IMC and its Diffusion Limit

DOE Office of Scientific and Technical Information (OSTI.GOV)

Szoke, A.; Brooks, E. D.

2016-07-12

We discuss the limits of validity of the Implicit Monte Carlo (IMC) method for the transport of thermally emitted radiation. The weakened coupling between the radiation and material energy of the IMC method causes defects in handling problems with strong transients. We introduce an approach to asymptotic analysis for the transport equation that emphasizes the fact that the radiation and material temperatures are always different in time-dependent problems, and we use it to show that IMC does not produce the correct diffusion limit. As this is a defect of IMC in the continuous equations, no improvement to its discretization canmore » remedy it.« less

Size effect model on kinetics of interfacial reaction between Sn-xAg-yCu solders and Cu substrate

PubMed Central

Huang, M. L.; Yang, F.

2014-01-01

The downsizing of solder balls results in larger interfacial intermetallic compound (IMC) grains and less Cu substrate consumption in lead-free soldering on Cu substrates. This size effect on the interfacial reaction is experimentally demonstrated and theoretically analyzed using Sn-3.0Ag-0.5Cu and Sn-3.5Ag solder balls. The interfacial reaction between the Sn-xAg-yCu solders and Cu substrates is a dynamic response to a combination of effects of interfacial IMC growth, Cu substrate consumption and composition variation in the interface zone. A concentration gradient controlled (CGC) kinetics model is proposed to explain the combined effects. The concentration gradient of Cu at the interface, which is a function of solder volume, initial Cu concentration and reaction time, is the root cause of the size effect. We found that a larger Cu concentration gradient results in smaller Cu6Sn5 grains and more consumption of Cu substrate. According to our model, the growth kinetics of interfacial Cu6Sn5 obeys a t1/3 law when the molten solder has approached the solution saturation, and will be slower otherwise due to the interfering dissolution mechanism. The size effect introduced in this model is supported by a good agreement between theoretical and experimental results. Finally, the scope of application of this model is discussed. PMID:25408359

An Introduction to the Mission Risk Diagnostic for Incident Management Capabilities (MRD-IMC)

DTIC Science & Technology

2014-05-01

objectives. Analysts applying the MRD- IMC evaluate a set of systemic risk factors (called drivers) to aggregate decision-making data and provide decision...function is in position to achieve its mission and objective(s) [Alberts 2012]. To accomplish this goal, analysts applying the MRD- IMC evaluate a...005 | 3 evaluation of IM processes and capabilities. The MRD- IMC comprises the following three core tasks: 1. Identify the mission and objective(s

Effects of Ag addition on solid–state interfacial reactions between Sn–Ag–Cu solder and Cu substrate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yang, Ming

Low–Ag–content Sn–Ag–Cu (SAC) solders have attracted much recent attention in electronic packaging for their low cost. To reasonably reduce the Ag content in Pb–free solders, a deep understanding of the basic influence of Ag on the SAC solder/Cu substrate interfacial reaction is essential. Previous studies have discussed the influence of Ag on the interfacial intermetallic compound (IMC) thickness. However, because IMC growth is the joint result of multiple factors, such characterizations do not reveal the actual role of Ag. In this study, changes in interfacial IMCs after Ag introduction were systemically and quantitatively characterized in terms of coarsening behaviors, orientationmore » evolution, and growth kinetics. The results show that Ag in the solder alloy affects the coarsening behavior, accelerates the orientation concentration, and inhibits the growth of interfacial IMCs during solid–state aging. The inhibition mechanism was quantitatively discussed considering the individual diffusion behaviors of Cu and Sn atoms, revealing that Ag inhibits interfacial IMC growth primarily by slowing the diffusion of Cu atoms through the interface. - Highlights: •Role of Ag in IMC formation during Sn–Ag–Cu soldering was investigated. •Ag affects coarsening, crystallographic orientation, and IMC growth. •Diffusion pathways of Sn and Cu are affected differently by Ag. •Ag slows Cu diffusion to inhibit IMC growth at solder/substrate interface.« less

76 FR 66103 - In the Matter of NASDAQ OMX BX, Inc.: Order Denying NASDAQ OMX BX, Inc.'s Petition for Review of...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-10-25

... Securities LLC (``Citadel''), dated August 12, 2011 (``Citadel Letter''); Andrew Stevens, Legal Counsel, IMC Financial Markets (``IMC''), dated August 15, 2011 (``IMC Letter''); Michael J. Simon, Secretary...

Solubilities of crystalline drugs in polymers: an improved analytical method and comparison of solubilities of indomethacin and nifedipine in PVP, PVP/VA, and PVAc.

PubMed

Sun, Ye; Tao, Jing; Zhang, Geoff G Z; Yu, Lian

2010-09-01

A previous method for measuring solubilities of crystalline drugs in polymers has been improved to enable longer equilibration and used to survey the solubilities of indomethacin (IMC) and nifedipine (NIF) in two homo-polymers [polyvinyl pyrrolidone (PVP) and polyvinyl acetate (PVAc)] and their co-polymer (PVP/VA). These data are important for understanding the stability of amorphous drug-polymer dispersions, a strategy actively explored for delivering poorly soluble drugs. Measuring solubilities in polymers is difficult because their high viscosities impede the attainment of solubility equilibrium. In this method, a drug-polymer mixture prepared by cryo-milling is annealed at different temperatures and analyzed by differential scanning calorimetry to determine whether undissolved crystals remain and thus the upper and lower bounds of the equilibrium solution temperature. The new annealing method yielded results consistent with those obtained with the previous scanning method at relatively high temperatures, but revised slightly the previous results at lower temperatures. It also lowered the temperature of measurement closer to the glass transition temperature. For D-mannitol and IMC dissolving in PVP, the polymer's molecular weight has little effect on the weight-based solubility. For IMC and NIF, the dissolving powers of the polymers follow the order PVP > PVP/VA > PVAc. In each polymer studied, NIF is less soluble than IMC. The activities of IMC and NIF dissolved in various polymers are reasonably well fitted to the Flory-Huggins model, yielding the relevant drug-polymer interaction parameters. The new annealing method yields more accurate data than the previous scanning method when solubility equilibrium is slow to achieve. In practice, these two methods can be combined for efficiency. The measured solubilities are not readily anticipated, which underscores the importance of accurate experimental data for developing predictive models.

The Influence of Grain Structure on Intermetallic Compound Layer Growth Rates in Fe-Al Dissimilar Welds

NASA Astrophysics Data System (ADS)

Xu, Lei; Robson, Joseph D.; Wang, Li; Prangnell, Philip B.

2018-02-01

The thickness of the intermetallic compound (IMC) layer that forms when aluminum is welded to steel is critical in determining the properties of the dissimilar joints. The IMC reaction layer typically consists of two phases ( η and θ) and many attempts have been made to determine the apparent activation energy for its growth, an essential parameter in developing any predictive model for layer thickness. However, even with alloys of similar composition, there is no agreement of the correct value of this activation energy. In the present work, the IMC layer growth has been characterized in detail for AA6111 aluminum to DC04 steel couples under isothermal annealing conditions. The samples were initially lightly ultrasonically welded to produce a metallic bond, and the structure and thickness of the layer were then characterized in detail, including tracking the evolution of composition and grain size in the IMC phases. A model developed previously for Al-Mg dissimilar welds was adapted to predict the coupled growth of the two phases in the layer, whilst accounting explicitly for grain boundary and lattice diffusion, and considering the influence of grain growth. It has been shown that the intermetallic layer has a submicron grain size, and grain boundary diffusion as well as grain growth plays a critical role in determining the thickening rate for both phases. The model was used to demonstrate how this explains the wide scatter in the apparent activation energies previously reported. From this, process maps were developed that show the relative importance of each diffusion path to layer growth as a function of temperature and time.

Ordered nanoporous silica as carriers for improved delivery of water insoluble drugs: a comparative study between three dimensional and two dimensional macroporous silica

PubMed Central

Wang, Ying; Zhao, Qinfu; Hu, Yanchen; Sun, Lizhang; Bai, Ling; Jiang, Tongying; Wang, Siling

2013-01-01

The goal of the present study was to compare the drug release properties and stability of the nanoporous silica with different pore architectures as a matrix for improved delivery of poorly soluble drugs. For this purpose, three dimensional ordered macroporous (3DOM) silica with 3D continuous and interconnected macropores of different sizes (200 nm and 500 nm) and classic mesoporous silica (ie, Mobil Composition of Matter [MCM]-41 and Santa Barbara Amorphous [SBA]-15) with well-ordered two dimensional (2D) cylindrical mesopores were successfully fabricated and then loaded with the model drug indomethacin (IMC) via the solvent deposition method. Scanning electron microscopy (SEM), N2 adsorption, differential scanning calorimetry (DSC), and X-ray diffraction (XRD) were applied to systematically characterize all IMC-loaded nanoporous silica formulations, evidencing the successful inclusion of IMC into nanopores, the reduced crystallinity, and finally accelerated dissolution of IMC. It was worth mentioning that, in comparison to 2D mesoporous silica, 3DOM silica displayed a more rapid release profile, which may be ascribed to the 3D interconnected pore networks and the highly accessible surface areas. The results obtained from the stability test indicated that the amorphous state of IMC entrapped in the 2D mesoporous silica (SBA-15 and MCM-41) has a better physical stability than in that of 3DOM silica. Moreover, the dissolution rate and stability of IMC loaded in 3DOM silica was closely related to the pore size of macroporous silica. The colorimetric 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) and Cell Counting Kit (CCK)-8 assays in combination with direct morphology observations demonstrated the good biocompatibility of nanoporous silica, especially for 3DOM silica and SBA-15. The present work encourages further study of the drug release properties and stability of drug entrapped in different pore architecture of silica in order to realize their potential in oral drug delivery. PMID:24174875

Implicit Monte Carlo with a linear discontinuous finite element material solution and piecewise non-constant opacity

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wollaeger, Ryan T.; Wollaber, Allan B.; Urbatsch, Todd J.

2016-02-23

Here, the non-linear thermal radiative-transfer equations can be solved in various ways. One popular way is the Fleck and Cummings Implicit Monte Carlo (IMC) method. The IMC method was originally formulated with piecewise-constant material properties. For domains with a coarse spatial grid and large temperature gradients, an error known as numerical teleportation may cause artificially non-causal energy propagation and consequently an inaccurate material temperature. Source tilting is a technique to reduce teleportation error by constructing sub-spatial-cell (or sub-cell) emission profiles from which IMC particles are sampled. Several source tilting schemes exist, but some allow teleportation error to persist. We examinemore » the effect of source tilting in problems with a temperature-dependent opacity. Within each cell, the opacity is evaluated continuously from a temperature profile implied by the source tilt. For IMC, this is a new approach to modeling the opacity. We find that applying both source tilting along with a source tilt-dependent opacity can introduce another dominant error that overly inhibits thermal wavefronts. We show that we can mitigate both teleportation and under-propagation errors if we discretize the temperature equation with a linear discontinuous (LD) trial space. Our method is for opacities ~ 1/T 3, but we formulate and test a slight extension for opacities ~ 1/T 3.5, where T is temperature. We find our method avoids errors that can be incurred by IMC with continuous source tilt constructions and piecewise-constant material temperature updates.« less

PubMed

Fernández Alba, Juan Jesús; Paublete Herrera, María Del Carmen; González Macías, María Del Carmen; Carral San Laureano, Florentino; Carnicer Fuentes, Concepción; Vilar Sánchez, Ángel; Torrejón Cardoso, Rafael; Moreno Corral, Luis Javier

2016-11-29

Introducción: el sobrepeso y la obesidad se asocian a una mayor probabilidad de que el parto finalice en cesárea. Dado que dicho incremento del riesgo podría estar sesgado por variables de confusión como la diabetes o la hipertensión, en el presente trabajo pretendemos determinar si este riesgo persiste tras ser ajustado por numerosas variables de control.Objetivo: determinar si el sobrepeso y/o la obesidad son factores de riesgo independientes para que el parto finalice en cesárea.Métodos: estudio de cohortes retrospectivo. Se han incluido gestantes adscritas al Hospital Universitario de Puerto Real. Periodo de estudio: 2002-2011. Se incluyeron dos grupos de estudio: sobrepeso al inicio de la gestación (IMC entre 25 y 29,9) y obesidad al inicio de la gestación (IMC ≥ 30). Grupo ontrol: IMC al inicio de la gestación normal (entre 18,5 y 24,9). El riesgo de cesárea fue analizado mediante un estudio de regresión logística múltiple incluyendo como covariables: edad materna, parto inducido, diabetes gestacional, diabetes pregestacional, macrosomía, hipertensión arterial, nuliparidad, cesárea anterior, parto pretérmino y parto postérmino.Resultados: de los 18.243 partos registrados, el IMC al inicio de la gestación constaba en 4.711 casos (25,8%). El 26,1% presentaban sobrepeso, el 12,4% obesidad y el 58,9% IMC normal. Sin ajustar por variables control, se asociaron a un incremento del riesgo de cesárea: sobrepeso (OR 1,48; IC95% 1,27-1,73); obesidad grado 1 (OR 2,09; IC95% 1,66-2,64); obesidad grado 2 (OR 3,23; IC95% 2,31-4,53); obesidad grado 3 (OR 2,57; IC95% 1,56-4,22). El riesgo aumentado se mantuvo significativo en el análisis multivariante: sobrepeso (OR 1,51; IC95% 1,24-1,84); obesidad (OR 2,15; IC95% 1,67-2,76).Conclusiones: encontramos una asociación significativa e independiente entre el sobrepeso/obesidad maternos y la finalización del parto mediante cesárea incluso ajustando por numerosas variables de control como: edad materna, nuliparidad, cesárea anterior, hipertensión, diabetes, peso al nacer y edad gestacional al parto.

Microstructural evolution and IMCs growth behavior of Sn-58Bi-0.25Mo solder joint during aging treatment

NASA Astrophysics Data System (ADS)

Yang, Li; Zhu, Lu; Zhang, Yaocheng; Zhou, Shiyuan; Xiong, Yifeng; Wu, Pengcheng

2018-02-01

The microstructural evolution and IMCs growth behavior of Sn-58Bi and Sn-58Bi-0.25Mo solder joints were investigated. The results showed that the microstructure is coarsened, the IMCs layer thickness is increased and the tensile strength of Sn-58Bi and Sn-58Bi-0.25Mo solder joints is decreased with increasing aging time and temperature. Aging temperature is the key factor that causes the excessive IMCs growth of the solder joint compared with aging time, and the activation energy of IMCs layer growth of Sn-58Bi and Sn-58Bi-0.25Mo solder joints is 48.94 kJ mol-1 and 53.79 kJ mol-1, respectively. During the aging treatment, the microstructure of Sn-58Bi solder joint is refined by adding Mo nanoparticles, and the appropriate IMCs layer thickness and improved mechanical properties are obtained by Sn-58Bi-0.25Mo solder joint.

Likability’s Effect on Interpersonal Motor Coordination: Exploring Natural Gaze Direction

PubMed Central

Zhao, Zhong; Salesse, Robin N.; Marin, Ludovic; Gueugnon, Mathieu; Bardy, Benoît G.

2017-01-01

Although existing studies indicate a positive effect of interpersonal motor coordination (IMC) on likability, no consensus has been reached as for the effect of likability back onto IMC. The present study specifically investigated the causal effect of likability on IMC and explored, by tracking the natural gaze direction, the possible underlying mechanisms. Twenty-two participants were engaged in an interpersonal finger-tapping task with a confederate in three likability conditions (baseline, likable, and unlikable), while wearing an eye tracker. They had to perform finger tapping at their comfort tempo with the confederate who tapped at the same or 1.5 times of the participant’s preferred frequency. Results showed that when tapping at the same frequency, the effect of likability on IMC varied with time. Participants coordinated at a higher level in the baseline condition at the beginning of the coordination task, and a facilitative effect of likability on IMC was revealed in the last session. As a novelty, our results evidenced a positive correlation between IMC and the amount of gaze onto the coordination partner’s movement only in the likable condition. No effect of likability was found when the confederate was tapping at 1.5 times of the participant’s preferred frequency. Our research suggests that the psychosocial property of the coordinating partner should be taken into consideration when investigating the performance of IMC and that IMC is a parameter that is sensitive to multiple factors. PMID:29123495

Formation of the Fe-Containing Intermetallic Compounds during Solidification of Al-5Mg-2Si-0.7Mn-1.1Fe Alloy

NASA Astrophysics Data System (ADS)

Que, Zhongping; Wang, Yun; Fan, Zhongyun

2018-06-01

Iron (Fe) is the most common and the most detrimental impurity element in Al alloys due to the formation of Fe-containing intermetallic compounds (IMCs), which are harmful to mechanical performance of the Al-alloy components. In this paper we investigate the formation of Fe-containing IMCs during solidification of an Al-5Mg-2Si-0.7Mn-1.1Fe alloy under varied solidification conditions. We found that the primary Fe-containing intermetallic compound (P-IMC) in the alloy is the BCC α-Al15(Fe,Mn)3Si2 phase and has a polyhedral morphology with {1 1 0} surface termination. The formation of the P-IMCs can be easily suppressed by increasing the melt superheat and/or cooling rate, suggesting that the nucleation of the α-Al15(Fe,Mn)3Si2 phase is difficult. In addition, we found that the IMCs with a Chinese script morphology is initiated on the {1 0 0} surfaces of the P-IMCs during the binary eutectic reaction with the α-Al phase. Both the binary and ternary eutectic IMCs are also identified as the BCC α-Al15(Fe,Mn)3Si2 phase. Furthermore, we found that the Fe content increases and the Mn content decreases in the Fe-containing intermetallic compounds with the decrease of the formation temperature, although the sum of the Fe and Mn contents in all of the IMCs is constant.

Building solids inside nano-space: from confined amorphous through confined solvate to confined 'metastable' polymorph.

PubMed

Nartowski, K P; Tedder, J; Braun, D E; Fábián, L; Khimyak, Y Z

2015-10-14

The nanocrystallisation of complex molecules inside mesoporous hosts and control over the resulting structure is a significant challenge. To date the largest organic molecule crystallised inside the nano-pores is a known pharmaceutical intermediate - ROY (259.3 g mol(-1)). In this work we demonstrate smart manipulation of the phase of a larger confined pharmaceutical - indomethacin (IMC, 357.8 g mol(-1)), a substance with known conformational flexibility and complex polymorphic behaviour. We show the detailed structural analysis and the control of solid state transformations of encapsulated molecules inside the pores of mesoscopic cellular foam (MCF, pore size ca. 29 nm) and controlled pore glass (CPG, pore size ca. 55 nm). Starting from confined amorphous IMC we drive crystallisation into a confined methanol solvate, which upon vacuum drying leads to the stabilised rare form V of IMC inside the MCF host. In contrast to the pure form, encapsulated form V does not transform into a more stable polymorph upon heating. The size of the constraining pores and the drug concentration within the pores determine whether the amorphous state of the drug is stabilised or it recrystallises into confined nanocrystals. The work presents, in a critical manner, an application of complementary techniques (DSC, PXRD, solid-state NMR, N2 adsorption) to confirm unambiguously the phase transitions under confinement and offers a comprehensive strategy towards the formation and control of nano-crystalline encapsulated organic solids.

Evaluation of matrix type mucoadhesive tablets containing indomethacin for buccal application.

PubMed

Ikeuchi-Takahashi, Yuri; Sasatsu, Masanaho; Onishi, Hiraku

2013-09-10

Nonsteroidal anti-inflammatory drugs (NSAIDs) are administered for pain relief from oral mucositis. However, the systemic administration of NSAIDs is limited due to systemic side effects. To avoid these side effects and treat local lesions effectively, a matrix type mucoadhesive tablet was developed. A mixture of hard fat, ethylcellulose (EC) and polyethylene glycol (PEG) was used as a matrix base, and indomethacin (IMC) was used as the principal agent. In tablets consisting of hard fat, EC and IMC, the drug release was sustained. In tablets consisting of hard fat, EC, considerable amounts of PEG and IMC, the drug release was relatively increased and IMC existed as the molecular phase or in an amorphous state. The in vitro adhesive force of the tablets consisting of hard fat, EC, considerable amounts of PEG and IMC was significantly increased as compared with the tablets consisting of hard fat and IMC. A significantly high tissue concentration and significantly low plasma concentration were observed after buccal administration of this matrix type mucoadhesive tablet as compared with that after oral administration of IMC. Thus, the matrix type mucoadhesive tablet has good potential as a preparation for the treatment of pain due to oral aphtha. Copyright © 2013 Elsevier B.V. All rights reserved.

Growth Behavior of Intermetallic Compounds at SnAgCu/Ni and Cu Interfaces

NASA Astrophysics Data System (ADS)

Qi, Lihua; Huang, Jihua; Zhang, Hua; Zhao, Xingke; Wang, Haitao; Cheng, Donghai

2010-02-01

The growth behavior of reaction-formed intermetallic compounds (IMCs) at Sn3.5Ag0.5Cu/Ni and Cu interfaces under thermal-shear cycling conditions was investigated. The results show that the morphology of (Cu x Ni1- x )6Sn5 and Cu6Sn5 IMCs formed both at Sn3.5Ag0.5Cu/Ni and Cu interfaces gradually changed from scallop-like to chunk-like, and different IMC thicknesses developed with increasing thermal-shear cycling time. Furthermore, Cu6Sn5 IMC growth rate at the Sn3.5Ag0.5Cu/Cu interface was higher than that of (Cu x Ni1- x )6Sn5 IMC under thermal-shear cycling. Compared to isothermal aging, thermal-shear cycling led to only one Cu6Sn5 layer at the interface between SnAgCu solder and Cu substrate after 720 cycles. Moreover, Ag3Sn IMC was dispersed uniformly in the solder after reflow. The planar Ag3Sn formed near the interface changed remarkably and merged together to large platelets with increasing cycles. The mechanism of formation of Cu6Sn5, (Cu x Ni1- x )6Sn5 and Ag3Sn IMCs during thermal-shear cycling process was investigated.

Tsuwalhkalh Ti Tmicwa (The Land is Ours): Stat'imc Self-Determination in the Face of Large-Scale Hydro-electric Development

NASA Astrophysics Data System (ADS)

Moritz, Sarah Carmen

In Canada, First Nations asserting authority over their lands are developing diverse strategies to overcome the state''s dogmatic insistence on jurisdictional sovereignty. This movement corresponds to the wider context of the challenges faced by indigenous people to use their own ways of knowing to resist or reformulate legal doctrines and political tenets based on colonial power. Interior Salish Stat'imc people identify themselves through a strong and ongoing social relationship with Sataqwa7, the Fraser River, and the "Valley of Plenty"---now known as the flooded Bridge River Valley---maintained through Stat'imc knowledge and cultural practice and demonstrated by talk of '"the Stat'imc right to fish" and Tsuwalhkalh Ti Tmicwa (The Land is Ours). Stat'imc fishers are prepared to contest and resist any regulatory system that is understood to impact this right to fish while they advocate their own ways of sustainable fishing and water management. Based on ethnographic research in collaboration with Stat'imc people, this thesis explores some of these often successful contestations especially in the context of increasing territorial governance and by example of the rapidly transforming relationship between Stat'imc, BC Hydro and the Province of BC. Interior Salish Stat'imc people are currently navigating through a significant phase of increasing jurisdiction and authority and recognition of (unsettled) territorial property relationships. This very dynamic process is marked by strategic collaborations, compensation for 'infringements' on St'a'imc Title and Rights, and conservation efforts to protect their home. An important example is the changing relationship between Stat'imc people and BC Hydro---a relationship between two groups with radically different cultures and agendas: Stat'imc people in a struggle for self-determination, social justice and cultural survival and BC Hydro, a corporate culture, with the agenda to provide hydro-electric power to BC, maintain operation 'certainty' and to generate revenue. Exploring the different ways of relating to and acting on the land will allow for more holistic and shared cultural practices of co-governing land, working collectively, remembering history, co-existing in the present and sharing a common future according to the ethical ideals of reconciliation: accountability for wrongdoing, justice, sharing, respect, transcending of hegemonic silences and increased public knowledge.

Mechanistic Prediction of the Effect of Microstructural Coarsening on Creep Response of SnAgCu Solder Joints

NASA Astrophysics Data System (ADS)

Mukherjee, S.; Chauhan, P.; Osterman, M.; Dasgupta, A.; Pecht, M.

2016-07-01

Mechanistic microstructural models have been developed to capture the effect of isothermal aging on time dependent viscoplastic response of Sn3.0Ag0.5Cu (SAC305) solders. SnAgCu (SAC) solders undergo continuous microstructural coarsening during both storage and service because of their high homologous temperature. The microstructures of these low melting point alloys continuously evolve during service. This results in evolution of creep properties of the joint over time, thereby influencing the long term reliability of microelectronic packages. It is well documented that isothermal aging degrades the creep resistance of SAC solder. SAC305 alloy is aged for (24-1000) h at (25-100)°C (~0.6-0.8 × T melt). Cross-sectioning and image processing techniques were used to periodically quantify the effect of isothermal aging on phase coarsening and evolution. The parameters monitored during isothermal aging include size, area fraction, and inter-particle spacing of nanoscale Ag3Sn intermetallic compounds (IMCs) and the volume fraction of micronscale Cu6Sn5 IMCs, as well as the area fraction of pure tin dendrites. Effects of microstructural evolution on secondary creep constitutive response of SAC305 solder joints were then modeled using a mechanistic multiscale creep model. The mechanistic phenomena modeled include: (1) dispersion strengthening by coarsened nanoscale Ag3Sn IMCs in the eutectic phase; and (2) load sharing between pro-eutectic Sn dendrites and the surrounding coarsened eutectic Sn-Ag phase and microscale Cu6Sn5 IMCs. The coarse-grained polycrystalline Sn microstructure in SAC305 solder was not captured in the above model because isothermal aging does not cause any significant change in the initial grain size and orientation of SAC305 solder joints. The above mechanistic model can successfully capture the drop in creep resistance due to the influence of isothermal aging on SAC305 single crystals. Contribution of grain boundary sliding to the creep strain of coarse grained joints has not been modeled in this study.

Evaluation of immunocontraception as a publicly acceptable form of vertebrate pest species control: the introduced grey squirrel in Britain as an example.

PubMed

Lurz, Peter W W; Shirley, Mark D F; Shirley, Mark D F; Rushton, Steve P

2002-09-01

We sent out a targeted questionnaire to organizations and private individuals across the UK that have expressed an interest in squirrel management and conservation. Respondents were asked to evaluate shooting, trapping, poisoning and immunocontraception (IMC), according to their perceived efficacy, cost efficiency, and whether they were considered to be humane. The majority of both professionals and enthusiasts indicated support for grey squirrel control to help conserve red squirrels and to reduce economic damage to timber crops. Respondents\\' comparative evaluations of current forms of control showed that trapping is the most acceptable method. When IMC is compared with the other methods, it was considered to be more humane and acceptable. In contrast, poisoning was seen as humane or acceptable by the fewest respondents. Furthermore, poisoning elicited the greatest difference in opinion between the professional and enthusiast groups. This difference (34\\%) may be interpreted partly as concern over the type of death that results from poisoning and partly as due to the possibility of poisoning nontarget species. Our findings indicate a need for more public information regarding secondary poisoning hazards to other species and their predators. Interest and concern about squirrel control correlated with the overlap between contemporary areas of distribution of the two species. It is these areas where consultation and education programs about control methods should be targeted. This research indicates that there would be support for grey squirrel control using IMC from both lay and professional interest groups. It demonstrates the existence of a sound basis for constructive dialog that can lead to the design and implementation of acceptable and efficient control strategies.

Evaluation of Immunocontraception as a Publicly Acceptable Form of Vertebrate Pest Species Control: The Introduced Grey Squirrel in Britain as an Example

NASA Astrophysics Data System (ADS)

Barr, Julian J. F.; Lurz, Peter W. W.; Shirley, Mark D. F.; Rushton, Steve P.

2002-09-01

We sent out a targeted questionnaire to organizations and private individuals across the UK that have expressed an interest in squirrel management and conservation. Respondents were asked to evaluate shooting, trapping, poisoning and immunocontraception (IMC), according to their perceived efficacy, cost efficiency, and whether they were considered to be humane. The majority of both professionals and enthusiasts indicated support for grey squirrel control to help conserve red squirrels and to reduce economic damage to timber crops. Respondents' comparative evaluations of current forms of control showed that trapping is the most acceptable method. When IMC is compared with the other methods, it was considered to be more humane and acceptable. In contrast, poisoning was seen as humane or acceptable by the fewest respondents. Furthermore, poisoning elicited the greatest difference in opinion between the professional and enthusiast groups. This difference (34%) may be interpreted partly as concern over the type of death that results from poisoning and partly as due to the possibility of poisoning nontarget species. Our findings indicate a need for more public information regarding secondary poisoning hazards to other species and their predators. Interest and concern about squirrel control correlated with the overlap between contemporary areas of distribution of the two species. It is these areas where consultation and education programs about control methods should be targeted. This research indicates that there would be support for grey squirrel control using IMC from both lay and professional interest groups. It demonstrates the existence of a sound basis for constructive dialog that can lead to the design and implementation of acceptable and efficient control strategies.

Advanced Monte Carlo methods for thermal radiation transport

NASA Astrophysics Data System (ADS)

Wollaber, Allan B.

During the past 35 years, the Implicit Monte Carlo (IMC) method proposed by Fleck and Cummings has been the standard Monte Carlo approach to solving the thermal radiative transfer (TRT) equations. However, the IMC equations are known to have accuracy limitations that can produce unphysical solutions. In this thesis, we explicitly provide the IMC equations with a Monte Carlo interpretation by including particle weight as one of its arguments. We also develop and test a stability theory for the 1-D, gray IMC equations applied to a nonlinear problem. We demonstrate that the worst case occurs for 0-D problems, and we extend the results to a stability algorithm that may be used for general linearizations of the TRT equations. We derive gray, Quasidiffusion equations that may be deterministically solved in conjunction with IMC to obtain an inexpensive, accurate estimate of the temperature at the end of the time step. We then define an average temperature T* to evaluate the temperature-dependent problem data in IMC, and we demonstrate that using T* is more accurate than using the (traditional) beginning-of-time-step temperature. We also propose an accuracy enhancement to the IMC equations: the use of a time-dependent "Fleck factor". This Fleck factor can be considered an automatic tuning of the traditionally defined user parameter alpha, which generally provides more accurate solutions at an increased cost relative to traditional IMC. We also introduce a global weight window that is proportional to the forward scalar intensity calculated by the Quasidiffusion method. This weight window improves the efficiency of the IMC calculation while conserving energy. All of the proposed enhancements are tested in 1-D gray and frequency-dependent problems. These enhancements do not unconditionally eliminate the unphysical behavior that can be seen in the IMC calculations. However, for fixed spatial and temporal grids, they suppress them and clearly work to make the solution more accurate. Overall, the work presented represents first steps along several paths that can be taken to improve the Monte Carlo simulations of TRT problems.

Comparison of bare and amino modified mesoporous silica@poly(ethyleneimine)s xerogel as indomethacin carrier: Superiority of amino modification.

PubMed

Li, Jing; Xu, Lu; Wang, Hongyu; Yang, Baixue; Liu, Hongzhuo; Pan, Weisan; Li, Sanming

2016-02-01

The purpose of this study was to facilely develop amino modified mesoporous silica xerogel synthesized using biomimetic method (B-AMSX) and to investigate its potential ability to be a drug carrier for loading poorly water-soluble drug indomethacin (IMC). For comparison, mesoporous silica xerogel without amino modification (B-MSX) was also synthesized using the same method. The changes of characteristics before and after IMC loading were systemically studied using fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), small angle X-ray scattering (SAXS) and nitrogen adsorption/desorption analysis. The results showed that B-MSX and B-AMSX were spherical nanoparticles with mesoporous structure. Compared with B-MSX, IMC loading capacity of B-AMSX was higher because more drug molecules can be loaded through stronger hydrogen bonding force. DSC and SAXS analysis confirmed the amorphous state of IMC after being loaded into B-MSX and B-AMSX. The in vitro drug release study revealed that B-MSX and B-AMSX improved IMC release significantly, and B-AMSX released IMC a little faster than B-MSX because of larger pore diameter of IMC-AMSX. B-MSX and B-AMSX degraded gradually in dissolution medium evidenced by color reaction and absorbance value, and B-AMSX degraded slower than B-MSX due to amino modification. In conclusion, B-AMSX with superiority of higher loading capacity and enhanced dissolution release can be considered to be a good candidate as drug carrier for IMC. Copyright © 2015 Elsevier B.V. All rights reserved.

Enhancement of the physical stability of amorphous indomethacin by mixing it with octaacetylmaltose. inter and intra molecular studies.

PubMed

Kaminska, E; Adrjanowicz, K; Zakowiecki, D; Milanowski, B; Tarnacka, M; Hawelek, L; Dulski, M; Pilch, J; Smolka, W; Kaczmarczyk-Sedlak, I; Kaminski, K

2014-10-01

To demonstrate a very effective and easy way of stabilization of amorphous indomethacin (IMC) by preparing binary mixtures with octaacetylmaltose (acMAL). In order to understand the origin of increased stability of amorphous system inter- and intramolecular interactions between IMC and acMAL were studied. The amorphous IMC, acMAL and binary mixtures (IMC-acMAL) with different weight ratios were analyzed by using Dielectric Spectroscopy (DS), Differential Scanning Calorimetry (DSC), Raman Spectroscopy, X-ray Diffraction (XRD), Infrared Spectroscopy (FTIR) and Quantitative Structure-Activity Relationship (QSAR). Our studies have revealed that indomethacin mixed with acetylated saccharide forms homogeneous mixture. Interestingly, even a small amount of modified maltose prevents from recrystallization of amorphous indomethacin. FTIR measurements and QSAR calculations have shown that octaacetylmaltose significantly affects the concentration of indomethacin dimers. Moreover, with increasing the amount of acMAL in the amorphous solid dispersion molecular interactions between matrix and API become more dominant than IMC-IMC ones. Structural investigations with the use of X-ray diffraction technique have demonstrated that binary mixture of indomethacin with acMAL does not recrystallize upon storage at room temperature for more than 1.5 year. Finally, it was shown that acMAL can be used to improve solubility of IMC. Acetylated derivative of maltose might be very effective agent to improve physical stability of amorphous indomethacin as well as to enhance its solubility. Intermolecular interactions between modified carbohydrate and IMC are likely to be responsible for increased stability effect in the glassy state.

IMC/RMC Network Professional Film Collection.

ERIC Educational Resources Information Center

New York State Education Dept., Albany. Special Education Instructional Materials Center.

The compilation is a comprehensive listing of films available from the centers in the Instructional Materials Centers/Regional Media Centers (IMC/RMC) Network. Each IMC/RMC location is given a numerical code in a preliminary listing. These numerical codes are used within the film listing, which is arranged alphabetically according to film titles,…

Improved method for implicit Monte Carlo

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, F. B.; Martin, W. R.

2001-01-01

The Implicit Monte Carlo (IMC) method has been used for over 30 years to analyze radiative transfer problems, such as those encountered in stellar atmospheres or inertial confinement fusion. Reference [2] provided an exact error analysis of IMC for 0-D problems and demonstrated that IMC can exhibit substantial errors when timesteps are large. These temporal errors are inherent in the method and are in addition to spatial discretization errors and approximations that address nonlinearities (due to variation of physical constants). In Reference [3], IMC and four other methods were analyzed in detail and compared on both theoretical grounds and themore » accuracy of numerical tests. As discussed in, two alternative schemes for solving the radiative transfer equations, the Carter-Forest (C-F) method and the Ahrens-Larsen (A-L) method, do not exhibit the errors found in IMC; for 0-D, both of these methods are exact for all time, while for 3-D, A-L is exact for all time and C-F is exact within a timestep. These methods can yield substantially superior results to IMC.« less

The Effect of Copper Addition on the Properties of Sn-0.7Cu Solder Paste

NASA Astrophysics Data System (ADS)

Said, R. M.; Mohamad Johari, F. H.; Salleh, M. A. A. Mohd; Sandu, A. V.

2018-03-01

The effect of copper addition on the properties of Sn-Cu based solder paste were investigate through this study. The Sn-0.7Cu solder paste doped with different concentration of Cu were prepared using solder paste mixture. The bulk solder microstructure of assolidified solder paste was studied. Besides that, intermetallic compound (IMC) formation on Cu substrate and hardness of all solder paste also being investigated. Results shows that increasing Cu concentration cause formation of large Cu6Sn5 IMC at bulk solder and the size of the IMC grew larger at high temperature. In addition, β-Sn area reduce when Cu concentration was high. The IMC morphology for all solder paste almost remain unchanged. However, there are large Cu6Sn5 IMC form near the interfacial IMC in Sn-Cu solder paste with high amount of Cu (Sn-10Cu). The hardness value was decrease when processing temperature at 250 °C due to present of small void in the microstructure while hardness of solder material increased at high temperature.

Miniature Earthmover

NASA Technical Reports Server (NTRS)

1996-01-01

International Machinery Corporation (IMC) developed a miniature earthmover, the 1/8 scale Caterpillar D11N Track-type Tractor, with trademark product approval and manufacturing/marketing license from Caterpillar, Inc. Through Marshall Space Flight Center assistance, the company has acquired infrared remote control technology, originally developed for space exploration. The technology is necessary for exports because of varying restrictions on radio frequency in foreign countries. The Cat D11N weighs only 340 pounds and has the world's first miniature industrial internal combustion engine. The earthmover's uses include mining, construction and demolition work, and hazardous environment work. IMC also has designs of various products for military use and other Caterpillar replicas.

Up-and-coming IMCs. [Intermetallic-Matrix Composites

NASA Technical Reports Server (NTRS)

Bowman, Randy; Noebe, Ronald

1989-01-01

While the good oxidation and environmental resistance, high melting points, and comparatively low densities of such ordered intermetallics as Ti3Al, NiAl, FeAl, and NbAl3 render them good candidates for advanced aerospace structures, their poor toughness at low temperatures and low strength at elevated temperatures have prompted the development of fiber-reinforced intermetallic-matrix composites (IMCs) with more balanced characteristics. Fabrication methods for continuous-fiber IMCs under development include the P/M 'powder cloth' method, the foil/fiber method, and thermal spraying. The ultimate success of IMCs depends on fibers truly compatible with the matrix materials.

Parallel runway requirement analysis study. Volume 1: The analysis

NASA Technical Reports Server (NTRS)

Ebrahimi, Yaghoob S.

1993-01-01

The correlation of increased flight delays with the level of aviation activity is well recognized. A main contributor to these flight delays has been the capacity of airports. Though new airport and runway construction would significantly increase airport capacity, few programs of this type are currently underway, let alone planned, because of the high cost associated with such endeavors. Therefore, it is necessary to achieve the most efficient and cost effective use of existing fixed airport resources through better planning and control of traffic flows. In fact, during the past few years the FAA has initiated such an airport capacity program designed to provide additional capacity at existing airports. Some of the improvements that that program has generated thus far have been based on new Air Traffic Control procedures, terminal automation, additional Instrument Landing Systems, improved controller display aids, and improved utilization of multiple runways/Instrument Meteorological Conditions (IMC) approach procedures. A useful element to understanding potential operational capacity enhancements at high demand airports has been the development and use of an analysis tool called The PLAND_BLUNDER (PLB) Simulation Model. The objective for building this simulation was to develop a parametric model that could be used for analysis in determining the minimum safety level of parallel runway operations for various parameters representing the airplane, navigation, surveillance, and ATC system performance. This simulation is useful as: a quick and economical evaluation of existing environments that are experiencing IMC delays, an efficient way to study and validate proposed procedure modifications, an aid in evaluating requirements for new airports or new runways in old airports, a simple, parametric investigation of a wide range of issues and approaches, an ability to tradeoff air and ground technology and procedures contributions, and a way of considering probable blunder mechanisms and range of blunder scenarios. This study describes the steps of building the simulation and considers the input parameters, assumptions and limitations, and available outputs. Validation results and sensitivity analysis are addressed as well as outlining some IMC and Visual Meteorological Conditions (VMC) approaches to parallel runways. Also, present and future applicable technologies (e.g., Digital Autoland Systems, Traffic Collision and Avoidance System II, Enhanced Situational Awareness System, Global Positioning Systems for Landing, etc.) are assessed and recommendations made.

Assessment of Carotid Intima-Media Thickness as an Early Marker Of Vascular Damage In Hypertensive Children.

PubMed

Baroncini, Liz Andréa Villela; Sylvestre, Lucimary de Castro; Baroncini, Camila Varotto; Pecoits, Roberto

2017-05-01

The increased carotid intima-media thickness (CIMT) correlates with the presence of atherosclerosis in adults and describes vascular abnormalities in both hypertensive children and adolescents. To assess CIMT as an early marker of atherosclerosis and vascular damage in hypertensive children and adolescents compared with non-hypertensive controls and to evaluate the influence of gender, age, and body mass index (BMI) on CIMT on each group. Observational cohort study. A total of 133 hypertensive subjects (male, n = 69; mean age, 10.5 ± 4 years) underwent carotid ultrasound exam for assessment of CIMT. One hundred and twenty-one non-hypertensive subjects (male, n = 64; mean age, 9.8 ± 4.1 years) were selected as controls for gender, age (± 1 year), and BMI (± 10%). There were no significant difference regarding gender (p = 0.954) and age (p = 0.067) between groups. Hypertensive subjects had higher BMI when compared to control group (p = 0.004), although within the established range of 10%. Subjects in the hypertensive group had higher CIMT values when compared to control group (0.46 ± 0.05 versus 0.42 ± 0.05 mm, respectively, p < 0.001; one-way ANOVA). Carotid IMT values were not significantly influenced by gender, age, and BMI when analyzed in both groups separately (Student's t-test for independent samples). According to the adjusted determination coefficient (R²) only 11.7% of CIMT variations were accounted for by group variations, including age, gender, and BMI. Carotid intima-media thickness was higher in hypertensive children and adolescents when compared to the control group. The presence of hypertension increased CIMT regardless of age, gender, and BMI. O aumento da espessura médio-intimal carotídea (EMIC) correlaciona-se com a presença de aterosclerose em adultos e descreve anormalidades vasculares em crianças e adolescentes hipertensos. Avaliar a EMIC como marcador precoce de aterosclerose e dano vascular em crianças e adolescentes hipertensos em comparação com um grupo controle e avaliar a influência do sexo, idade e índice de massa corporal (IMC) sobre a EMIC em cada grupo. Estudo observacional de coorte. Um total de 133 indivíduos hipertensos (sexo masculino, n = 69; idade média 10.5 ± 4 anos) foi submetido à ultrassonografia das artérias carótidas para avaliação da EMIC. Cento e vinte e um indivíduos saudáveis (sexo masculino, n = 64; idade média, 9.8 ± 4.1 anos) foram selecionados como controles para as seguintes características: sexo, idade (± 1ano) e IMC (±10%). Não houve diferenças significativas entre os grupos com relação ao sexo (p = 0,954) e idade (p = 0,067). Os indivíduos hipertensos apresentaram maior IMC (p = 0,004), porém dentro da faixa estabelecida de até 10%. Os indivíduos hipertensos apresentaram maiores valores de EMIC quando comparados ao grupo-controle (0,46 ± 0,05 versus 0,42 ± 0,05 mm, respectivamente, p < 0.001; ANOVA com um parâmetro). Os valores da EMIC não foram influenciados por sexo, idade e IMC quando analisados em ambos os grupos separadamente (Teste t de Student para amostras independentes). De acordo com o coeficiente de determinação (R²) ajustado, apenas 11.7% das variações da EMIC são devidas às variações em cada grupo, incluindo idade, sexo e IMC. A espessura médio-intimal das carótidas apresentou-se aumentada em crianças e adolescentes hipertensos quando comparados ao grupo controle. A presença de hipertensão aumentou a EMIC independentemente de idade, sexo e IMC.

Electromigration effect on intermetallic growth and Young's modulus in SAC solder joint

NASA Astrophysics Data System (ADS)

Xu, Luhua; Pang, John H. L.; Ren, Fei; Tu, K. N.

2006-12-01

Solid-state intermetallic compound (IMC) growth behavior plays and important role in solder joint reliability of electronic packaging assemblies. The directional impact of electromigration (EM) on the growth of interfacial IMCs in Ni/SAC/Ni, Cu/SAC/Ni single BGA ball solder joint, and fine pitch ball-grid-array (FPBGA) at the anode and cathode sides is reported in this study. When the solder joint was subjected to a current density of 5,000 A/cm2 at 125°C or 150°C, IMC layer growth on the anode interface was faster than that on the cathode interface, and both were faster than isothermal aging due to the Joule heating effect. The EM affects the IMC growth rate, as well as the composition and mechanical properties. The Young’s modulus and hardness were measured by the nanoindentation continuous stiffness measurement (CSM) from planar IMC surfaces after EM exposure. Different values were observed at the anode and cathode. The energy-dispersive x-ray (EDX) line scan analysis was conducted at the interface from the cathode to anode to study the presence of species; Ni was found in the anode IMC at SAC/Cu in the Ni/SAC/Cu joint, but not detected when the current was reverse. Electron-probe microanalysis (EPMA) measurement on the Ni/SAC/Ni specimen also confirmed the polarized Ni and Cu distributions in cathode and anode IMCs, which were (Ni0.57Cu0.43)3Sn4 and (Cu0.73Ni0.27)6Sn5, respectively. Thus, the Young’s moduli of the IMC are 141 and 175 GPa, respectively.

Interaction of intermetallic compound formation in Cu/SnAgCu/NiAu sandwich solder joints

NASA Astrophysics Data System (ADS)

Xia, Yanghua; Lu, Chuanyan; Chang, Junling; Xie, Xiaoming

2006-05-01

The interaction between Cu/solder interface and solder/Ni interface at a Cu/SnAgCu/NiAu sandwich solder joint with various surface finishes and solder heights was investigated. The interfacial microstructure and composition of intermetallic compounds (IMCs) were characterized by a scanning electron microscope (SEM) equipped with energy-dispersive x-ray spectroscopy (EDX). The phase structure of IMC was identified by x-ray diffraction (XRD). It is found that ternary (Cu,Ni)6Sn5 IMCs form at both interfaces. The composition, thickness, and morphology of the ternary IMCs depend not only on the interface itself, but also on the opposite interface. That is to say, strong coupling effects exist between the two interfaces. Lattice parameters of (Cu,Ni)6Sn5 shrink with increasing Ni content, in agreement with Vegard’s law. The mechanism of ternary IMC formation and interface coupling effects are discussed in this paper.

Spacecraft camera image registration

NASA Technical Reports Server (NTRS)

Kamel, Ahmed A. (Inventor); Graul, Donald W. (Inventor); Chan, Fred N. T. (Inventor); Gamble, Donald W. (Inventor)

1987-01-01

A system for achieving spacecraft camera (1, 2) image registration comprises a portion external to the spacecraft and an image motion compensation system (IMCS) portion onboard the spacecraft. Within the IMCS, a computer (38) calculates an image registration compensation signal (60) which is sent to the scan control loops (84, 88, 94, 98) of the onboard cameras (1, 2). At the location external to the spacecraft, the long-term orbital and attitude perturbations on the spacecraft are modeled. Coefficients (K, A) from this model are periodically sent to the onboard computer (38) by means of a command unit (39). The coefficients (K, A) take into account observations of stars and landmarks made by the spacecraft cameras (1, 2) themselves. The computer (38) takes as inputs the updated coefficients (K, A) plus synchronization information indicating the mirror position (AZ, EL) of each of the spacecraft cameras (1, 2), operating mode, and starting and stopping status of the scan lines generated by these cameras (1, 2), and generates in response thereto the image registration compensation signal (60). The sources of periodic thermal errors on the spacecraft are discussed. The system is checked by calculating measurement residuals, the difference between the landmark and star locations predicted at the external location and the landmark and star locations as measured by the spacecraft cameras (1, 2).

Physical Climatology of Indonesian Maritime Continent: An Overview of Observational Studies

NASA Astrophysics Data System (ADS)

Yamanaka, M. D.

2014-12-01

The Indonesian maritime continent (IMC) is a miniature of our land-sea coexisting planet Earth. Firstly, without interior activity, the Earth becomes an even-surfaced "aqua-planet" with both atmosphere and ocean flowing almost zonally, and solar differential heating generates (global thermal tides and) Hadley's meridional circulations with ITCZ along the equator as observed actually over open (Indian and Pacific) oceans in the both sides of IMC. ITCZ involves intraseasonal variations or super cloud clusters moving eastward. Secondly, the lands and seas over the actual Earth have been keeping the area ratio of 3:7 (similar to that of islands and inland/surrounding seas in IMC), but their displacements have produced IMC near the equator, which turns equatorial Pacific easterly current northward (Kuroshio) and reflects equatorial oceanic waves inducing coupled ocean-atmosphere interannual variations such as ENSO and IOD, or displacements of Walker's zonal circulations. Thirdly, because IMC consists of many large/small islands with very long coastlines, many narrow straits become a dam for the global (Pacific to Indian) ocean circulation, and the land-sea heat capacity contrasts along the coastlines generate the world's largest rainfall with diurnal cycles (sea-land breeze circulations). The diurnal cycles are dominant in the rainy season (austral summer in Jawa and Bali), because rainfall-induced sprinkler-like land cooling reverses the trans-coastal temperature gradient before sunrise, and subsequent clear sky on land until around noon provides solar heating dependent on season. These processes lead to rapid land/hydrosphere-atmosphere water exchange, local air pollutant washout, and transequatorial boreal winter monsoon (cold surge). In El Niño years the cooler sea-surface temperature suppresses the morning coastal-sea rainfall, and induces often serious smog over IMC. Lastly, high-resolution observations/models covering both over islands and seas are necessary. A radar-profiler network (HARIMAU) has been constructed during FY2005-09, and capacity building on radar operations and buoy manufacturing has been promoted during FY2009-13 by Japan-Indonesia collaboration projects, which are taken over by an Indonesian national center (MCCOE) established in November 2013.

PDSS/IMC CIS user's guide

NASA Technical Reports Server (NTRS)

1984-01-01

The Spacelab Payload Development Support System PDSS Image Motion Compensator (IMC) computer interface simulation (CIS) user's manual is given. The software provides a real time interface simulation for the following IMC subsystems: the Dry Rotor Reference Unit, the Advanced Star/Target Reference Optical sensor, the Ultra Violet imaging telescope, the Wisconson Ultraviolet Photopolarimetry Experiment, the Cruciform Power distributor, and the Spacelab Experiment Computer Operating System.

A Simulation Study of Instrument Meteorological Condition Approaches to Dual Parallel Runways Spaced 3400 and 2500 Feet Apart Using Flight-Deck-Centered Technology

NASA Technical Reports Server (NTRS)

Waller, Marvin C.; Scanlon, Charles H.

1999-01-01

A number of our nations airports depend on closely spaced parallel runway operations to handle their normal traffic throughput when weather conditions are favorable. For safety these operations are curtailed in Instrument Meteorological Conditions (IMC) when the ceiling or visibility deteriorates and operations in many cases are limited to the equivalent of a single runway. Where parallel runway spacing is less than 2500 feet, capacity loss in IMC is on the order of 50 percent for these runways. Clearly, these capacity losses result in landing delays, inconveniences to the public, increased operational cost to the airlines, and general interruption of commerce. This document presents a description and the results of a fixed-base simulation study to evaluate an initial concept that includes a set of procedures for conducting safe flight in closely spaced parallel runway operations in IMC. Consideration of flight-deck information technology and displays to support the procedures is also included in the discussions. The procedures and supporting technology rely heavily on airborne capabilities operating in conjunction with the air traffic control system.

Simulation study of two VTOL control/display systems in IMC approach and landing

NASA Technical Reports Server (NTRS)

Merrick, V. K.

1981-01-01

Both systems had full attitude command; the more complex system (Type 1) also had translational velocity command. The systems were applied to existing models of a VTOL lift-fan transport and the AV-8A Harrier. Simulated landings were made on a model of a DD963 Spruance-class destroyer. It was concluded that acceptable transitions and vertical landings can be performed, using the Type 1 system, in free-air turbulence up to 2.5 m/sec and sea state 6 and, using the Type 2 system, in free-air turbulence up to 1.5 m/sec and sea state 4.

Performance analysis of different tuning rules for an isothermal CSTR using integrated EPC and SPC

NASA Astrophysics Data System (ADS)

Roslan, A. H.; Karim, S. F. Abd; Hamzah, N.

2018-03-01

This paper demonstrates the integration of Engineering Process Control (EPC) and Statistical Process Control (SPC) for the control of product concentration of an isothermal CSTR. The objectives of this study are to evaluate the performance of Ziegler-Nichols (Z-N), Direct Synthesis, (DS) and Internal Model Control (IMC) tuning methods and determine the most effective method for this process. The simulation model was obtained from past literature and re-constructed using SIMULINK MATLAB to evaluate the process response. Additionally, the process stability, capability and normality were analyzed using Process Capability Sixpack reports in Minitab. Based on the results, DS displays the best response for having the smallest rise time, settling time, overshoot, undershoot, Integral Time Absolute Error (ITAE) and Integral Square Error (ISE). Also, based on statistical analysis, DS yields as the best tuning method as it exhibits the highest process stability and capability.

Chemorheology of in-mold coating for compression molded SMC applications

NASA Astrophysics Data System (ADS)

Ko, Seunghyun; Straus, Elliott J.; Castro, Jose M.

2015-05-01

In-mold coating (IMC) is applied to compression molded sheet molding compound (SMC) exterior automotive or truck body panels as an environmentally friendly alternative to make the surface conductive for subsequent electrostatic painting operations. The coating is a thermosetting liquid that when injected onto the surface of the part cures and bonds to provide a smooth conductive surface. In order to optimize the IMC process, it is essential to predict the time available for flow, that is the time before the thermosetting reaction starts (inhibition time) as well as the time when the coating has enough structural integrity so that the mold can be opened without damaging the part surface (cure time). To predict both the inhibition time and the cure time, it is critical to study the chemorheology of IMC. In this paper, we study the chemorheology for a typical commercial IMC system, and show its relevance to both the flow and cure time for the IMC stage during SMC compression molding.

Influence of nanoparticle addition on the formation and growth of intermetallic compounds (IMCs) in Cu/Sn–Ag–Cu/Cu solder joint during different thermal conditions

PubMed Central

Ting Tan, Ai; Wen Tan, Ai; Yusof, Farazila

2015-01-01

Nanocomposite lead-free solders are gaining prominence as replacements for conventional lead-free solders such as Sn–Ag–Cu solder in the electronic packaging industry. They are fabricated by adding nanoparticles such as metallic and ceramic particles into conventional lead-free solder. It is reported that the addition of such nanoparticles could strengthen the solder matrix, refine the intermetallic compounds (IMCs) formed and suppress the growth of IMCs when the joint is subjected to different thermal conditions such as thermal aging and thermal cycling. In this paper, we first review the fundamental studies on the formation and growth of IMCs in lead-free solder joints. Subsequently, we discuss the effect of the addition of nanoparticles on IMC formation and their growth under several thermal conditions. Finally, an outlook on the future growth of research in the fabrication of nanocomposite solder is provided. PMID:27877786

Structuring the Chief Information Security Officer Organization

DTIC Science & Technology

2015-09-07

GP9 Objectively Evaluate Adherence CERT-RMM HRM Human Resource Management CERT-RMM ID Identity Management CERT-RMM IMC Incident Management and...Detect, triage, analyze, respond to, and recover from suspicious events and security incidents Security incident management IMC IR IR-1, IR- 2, IR-3...2015-TN-007 | SOFTWARE ENGINEERING INSTITUTE | CARNEGIE MELLON UNIVERSITY 6 Table 2: Source Acronyms3 CERT-RMM NIST 800-53 C2M2 IMC Incident

Effect of Zn addition on bulk microstructure of lead-free solder SN100C

NASA Astrophysics Data System (ADS)

Nur Nadirah M., K.; Nurulakmal M., S.

2017-12-01

This paper reports the effect of adding Zn (0.5 wt% Zn, 1.0 wt% Zn) to the bulk microstructure and intermetallic compound (IMC) formation of commercial SN100C (Sn-0.7Cu-0.05Ni+Ge) lead-free solder alloy. Solder alloys were prepared by melting SN100C ingot and Zn shots, and subsequently casted into steel mold. Samples were ground and polished for XRF, and polished samples were then etched for microstructure analysis. Microstructure of bulk solder and the IMC were observed using SEM equipped with EDX. SEM result showed the addition of 0.5 wt% Zn resulted in increased grain size of β-Sn matrix but further addition of Zn (1 wt%) reduced the size of β-Sn dendrites in the bulk solder. Several intermetallic compounds (IMCs) were observed distributed in the Sn matrix; Cu-Zn, Ni-Zn and Cu-Zn-Ni IMC but in relatively small percentage compared to Cu-Zn and Ni-Zn. These particles could be considered as effective nucleating agent that led to finer β-Sn grains. It is expected that the finer β-Sn will contribute towards higher solder strength and the various IMCs present could act as suppressant for Sn diffusion which will then tend to reduce the IMC growth during thermal aging.

Development of a luciferase based viral inhibition assay to evaluate vaccine induced CD8 T-cell responses

PubMed Central

Naarding, Marloes A.; Fernandez-Fernandez, Natalia; Kappes, John C.; Hayes, Peter; Ahmed, Tina; Icyuz, Mert; Edmonds, Tara G.; Bergin, Philip; Anzala, Omu; Hanke, Tomas; Clark, Lorna; Cox, Josephine H.; Cormier, Emmanuel; Ochsenbauer, Christina; Gilmour, Jill

2014-01-01

Emergence of SIV and HIV specific CD8 T cells has been shown to correlate with control of in vivo replication. Poor correlation between IFN-γ ELISPOT responses and in vivo control of the virus has triggered the development of more relevant assays to assess functional HIV-1 specific CD8 T-cell responses for the evaluation and prioritization of new HIV-1 vaccine candidates. We previously established a viral inhibition assay (VIA) that measures the ability of vaccine-induced CD8 T-cell responses to inhibit viral replication in autologous CD4 T cells. In this assay, viral replication is determined by measuring p24 in the culture supernatant. Here we describe the development of a novel VIA, referred to as IMC LucR VIA that exploits replication-competent HIV-1 infectious molecular clones (IMCs) in which the complete proviral genome is strain-specific and which express the Renilla luciferase (LucR) gene to determine viral growth and inhibition. The introduction of the luciferase readout does provide significant improvement of the read out time. In addition to switching to the LucR read out, changes made to the overall protocol resulted in the miniaturization of the assay from a 48 to a 96-well plate format, which preserved sample and allowed for the introduction of replicates. The overall assay time was reduced from 13 to 8 days. The assay has a high degree of specificity, and the previously observed non-specific background inhibition in cells from HIV-1 negative volunteers has been reduced dramatically. Importantly, we observed an increase in positive responses, indicating an improvement in sensitivity compared to the original VIA. Currently, only a limited number of “whole-genome” IMC-LucR viruses are available and our efforts will focus on expanding the panel to better evaluate anti-viral breadth. Overall, we believe the IMC LucR VIA provides a platform to assess functional CD8 T-cell responses in large-scale clinical trial testing, which will enhance the ability to select the most promising HIV-1 vaccine candidates capable of controlling HIV-1 replication in vivo. PMID:24291126

Characterization of various types of mast cells derived from model mice of familial gastrointestinal stromal tumors with KIT-Asp818Tyr mutation

PubMed Central

Kajimoto, Noriko; Nakai, Norihiro; Ohkouchi, Mizuka; Hashikura, Yuka; Liu-Kimura, Ning-Ning; Isozaki, Koji; Hirota, Seiichi

2015-01-01

Sporadic mast cell neoplasms and gastrointestinal stromal tumors (GISTs) often have various types of somatic gain-of-function mutations of the c-kit gene which encodes a receptor tyrosine kinase, KIT. Several types of germline gain-of-function mutations of the c-kit gene have been detected in families with multiple GISTs. All three types of model mice for the familial GISTs with germline c-kit gene mutations at exon 11, 13 or 17 show development of GIST, while they are different from each other in skin mast cell number. Skin mast cell number in the model mice with exon 17 mutation was unchanged compared to the corresponding wild-type mice. In the present study, we characterized various types of mast cells derived from the model mice with exon 17 mutation (KIT-Asp818Tyr) corresponding to human familial GIST case with human KIT-Asp820Tyr to clarify the role of the c-kit gene mutation in mast cells. Bone marrow-derived cultured mast cells (BMMCs) derived from wild-type mice, heterozygotes and homozygotes were used for the experiments. Immortalized BMMCs, designated as IMC-G4 cells, derived from BMMCs of a homozygote during long-term culture were also used. Ultrastructure, histamine contents, proliferation profiles and phosphorylation of various signaling molecules in those cells were examined. In IMC-G4 cells, presence of additional mutation(s) of the c-kit gene and effect of KIT inhibitors on both KIT autophosphorylation and cell proliferation were also analyzed. We demonstrated that KIT-Asp818Tyr did not affect ultrastructure and proliferation profiles but did histamine contents in BMMCs. IMC-G4 cells had an additional novel c-kit gene mutation of KIT-Tyr421Cys which is considered to induce neoplastic transformation of mouse mast cells and the mutation appeared to be resistant to a KIT inhibitor of imatinib but sensitive to another KIT inhibitor of nilotinib. IMC-G4 cells might be a useful mast cell line to investigate mast cell biology. PMID:26722383

Inhibiting surface crystallization of amorphous indomethacin by nanocoating.

PubMed

Wu, Tian; Sun, Ye; Li, Ning; de Villiers, Melgardt M; Yu, Lian

2007-04-24

An amorphous solid (glass) may crystallize faster at the surface than through the bulk, making surface crystallization a mechanism of failure for amorphous pharmaceuticals and other materials. An ultrathin coating of gold or polyelectrolytes inhibited the surface crystallization of amorphous indomethacin (IMC), an anti-inflammatory drug and model organic glass. The gold coating (10 nm) was deposited by sputtering, and the polyelectrolyte coating (3-20 nm) was deposited by an electrostatic layer-by-layer assembly of cationic poly(dimethyldiallyl ammonium chloride) (PDDA) and anionic sodium poly(styrenesulfonate) (PSS) in aqueous solution. The coating also inhibited the growth of existing crystals. The inhibition was strong even with one layer of PDDA. The polyelectrolyte coating still permitted fast dissolution of amorphous IMC and improved its wetting and flow. The finding supports the view that the surface crystallization of amorphous IMC is enabled by the mobility of a thin layer of surface molecules, and this mobility can be suppressed by a coating of only a few nanometers. This technique may be used to stabilize amorphous drugs prone to surface crystallization, with the aqueous coating process especially suitable for drugs of low aqueous solubility.

Control Al/Mg intermetallic compound formation during ultrasonic-assisted soldering Mg to Al.

PubMed

Xu, Zhiwu; Li, Zhengwei; Li, Jiaqi; Ma, Zhipeng; Yan, Jiuchun

2018-09-01

To prevent the formation of Al/Mg intermetallic compounds (IMCs) of Al 3 Mg 2 and Al 12 Mg 17 , dissimilar Al/Mg were ultrasonic-assisted soldered using Sn-based filler metals. A new IMC of Mg 2 Sn formed in the soldered joints during this process and it was prone to crack at large thickness. The thickness of Mg 2 Sn was reduced to 22 μm at 285 °C when using Sn-3Cu as the filler metal. Cracks were still observed inside the blocky Mg 2 Sn. The thickness of Mg 2 Sn was significantly reduced when using Sn-9Zn as the filler metal. A 17 μm Mg 2 Sn layer without crack was obtained at a temperature of 200 °C, ultrasonic power of Mode I, and ultrasonic time of 2 s. The shear strengths of the joints using Sn-9Zn was much higher than those using Sn-3Cu because of the thinner Mg 2 Sn layer in the former joints. Sn whiskers were prevented by using Sn-9Zn. A cavitation model during ultrasonic assisted soldering was proposed. Copyright © 2018 Elsevier B.V. All rights reserved.

Estimating 3D L5/S1 moments and ground reaction forces during trunk bending using a full-body ambulatory inertial motion capture system.

PubMed

Faber, G S; Chang, C C; Kingma, I; Dennerlein, J T; van Dieën, J H

2016-04-11

Inertial motion capture (IMC) systems have become increasingly popular for ambulatory movement analysis. However, few studies have attempted to use these measurement techniques to estimate kinetic variables, such as joint moments and ground reaction forces (GRFs). Therefore, we investigated the performance of a full-body ambulatory IMC system in estimating 3D L5/S1 moments and GRFs during symmetric, asymmetric and fast trunk bending, performed by nine male participants. Using an ambulatory IMC system (Xsens/MVN), L5/S1 moments were estimated based on the upper-body segment kinematics using a top-down inverse dynamics analysis, and GRFs were estimated based on full-body segment accelerations. As a reference, a laboratory measurement system was utilized: GRFs were measured with Kistler force plates (FPs), and L5/S1 moments were calculated using a bottom-up inverse dynamics model based on FP data and lower-body kinematics measured with an optical motion capture system (OMC). Correspondence between the OMC+FP and IMC systems was quantified by calculating root-mean-square errors (RMSerrors) of moment/force time series and the interclass correlation (ICC) of the absolute peak moments/forces. Averaged over subjects, L5/S1 moment RMSerrors remained below 10Nm (about 5% of the peak extension moment) and 3D GRF RMSerrors remained below 20N (about 2% of the peak vertical force). ICCs were high for the peak L5/S1 extension moment (0.971) and vertical GRF (0.998). Due to lower amplitudes, smaller ICCs were found for the peak asymmetric L5/S1 moments (0.690-0.781) and horizontal GRFs (0.559-0.948). In conclusion, close correspondence was found between the ambulatory IMC-based and laboratory-based estimates of back load. Copyright © 2015 Elsevier Ltd. All rights reserved.

Endoscopic mucosal resection for high-grade dysplasia and intramucosal carcinoma in Barrett’s esophagus: An Italian experience

PubMed Central

Conio, Massimo; Repici, Alessandro; Cestari, Renzo; Blanchi, Sabrina; Lapertosa, Gabriella; Missale, Guido; Casa, Domenico Della; Villanacci, Vincenzo; Calandri, Pier Gigi; Filiberti, Rosangela

2005-01-01

AIM: To evaluate endoscopic mucosal resection (EMR) in patients with high-grade dysplasia (HGD) and/or intramucosal cancer (IMC) in Barrett’s esophagus (BE). METHODS: Between June 2000 and December 2003, 39 consecutive patients with HGD (35) and/or IMC (4) underwent EMR. BE >30 mm was present in 27 patients. In three patients with short segment BE (25.0%), HGD was detected in a normal appearing BE. Lesions had a mean diameter of 14.8±10.3 mm. Mucosal resection was carried out using the cap method. RESULTS: The average size of resections was 19.7±9.4×14.6±8.2 mm. Histopathologic assessment post-resection revealed 5 low-grade dysplasia (LGD) (12.8%), 27 HGD (69.2%), 2 IMC (5.1%), and 5 SMC (-12.8%). EMR changed the pre-treatment diagnosis in 10 patients (25.6%). Three patients with SMC underwent surgery. Histology of the surgical specimen revealed 1 T0N0 and 2 T1N0 lesions. The remaining two patients were cancer free at 32.5 and 45.6 mo, respectively. A metachronous lesion was detected after 25 mo in one patient with HGD. Intra-procedural bleeding, controlled at endoscopy, occurred in four patients (10.3%). After a median follow-up of 34.9 mo, all patients remained in remission. CONCLUSION: In the medium term, EMR is effective and safe to treat HGD and/or IMC within BE and is a valuable staging method. It could become an alternative to surgery. PMID:16425359

Deconfinement phase transition in a magnetic field in 2 + 1 dimensions from holographic models

NASA Astrophysics Data System (ADS)

M. Rodrigues, Diego; Capossoli, Eduardo Folco; Boschi-Filho, Henrique

2018-05-01

Using two different models from holographic quantum chromodynamics (QCD) we study the deconfinement phase transition in 2 + 1 dimensions in the presence of a magnetic field. Working in 2 + 1 dimensions lead us to exact solutions on the magnetic field, in contrast with the case of 3 + 1 dimensions where the solutions on the magnetic field are perturbative. As our main result we predict a critical magnetic field Bc where the deconfinement critical temperature vanishes. For weak fields meaning B Bc we find that the critical temperature raises with growing field showing a magnetic catalysis (MC). These results for IMC and MC are in agreement with the literature.

Photodynamic therapy (PDT) in Barrett's esophagus with dysplasia or early cancer.

PubMed

Foroulis, Christophoros N; Thorpe, James A C

2006-01-01

Esophagectomy is the standard treatment for high-grade dysplasia (HGD) and intramucosal adenocarcinoma (IMC) arising within Barrett's esophagus. Results of photodynamic therapy (PDT) were retrospectively studied to evaluate the effectiveness of PDT in ablating HGD and/or IMC complicating Barrett's esophagus. Thirty-one patients unfit for or refusing esophagectomy (male: 20, mean age: 73.4+/-9.3 years) underwent Porfimer sodium PDT ablation of their HGD (15 patients), HGD plus IMC (10 patients) or submucosal/limited T2 adenocarcinoma (6 patients). The mean Barrett's length was 5.8+/-2.2 cm. Pre-PDT endoscopic mucosal resection or Nd:YAG laser ablation of mucosal nodularity within Barrett's segment was offered in six patients. The main PDT complications were esophagitis (16.1%), photoreactions (12.9%) and stricture requiring dilatation (6.25%). The median post-PDT follow-up was 14 months. The long-term results were (a) for HGD/IMC: initial complete response (endoscopic and histologic absence of HGD-IMC) to PDT was observed in 80.95% of patients, partial response (no endoscopic abnormality, residual IMC-HGD on biopsy) in 9.52%, no response in 9.52% (the recurrence rate after an initial complete response was 17.64%) and (b) for T1b/limited T2 tumors: two patients died from cancer after 24 and 46 months, no evidence of tumor was found in two patients after 12 and 19 months and tumor recurrence was seen in two after 15 and 17 months. The mean survival was 22.1+/-12.3 months. PDT is effective in ablating HGD/IMC complicating Barrett's esophagus in the majority of cases, while it also seems to be quite effective in treating T1b/limited T2 carcinomas.

Calculation of parameters of technological equipment for deep-sea mining

NASA Astrophysics Data System (ADS)

Yungmeister, D. A.; Ivanov, S. E.; Isaev, A. I.

2018-03-01

The actual problem of extracting minerals from the bottom of the world ocean is considered. On the ocean floor, three types of minerals are of interest: iron-manganese concretions (IMC), cobalt-manganese crusts (CMC) and sulphides. The analysis of known designs of machines and complexes for the extraction of IMC is performed. These machines are based on the principle of excavating the bottom surface; however such methods do not always correspond to “gentle” methods of mining. The ecological purity of such mining methods does not meet the necessary requirements. Such machines require the transmission of high electric power through the water column, which in some cases is a significant challenge. The authors analyzed the options of transportation of the extracted mineral from the bottom. The paper describes the design of machines that collect IMC by the method of vacuum suction. In this method, the gripping plates or drums are provided with cavities in which a vacuum is created and individual IMC are attracted to the devices by a pressure drop. The work of such machines can be called “gentle” processing technology of the bottom areas. Their environmental impact is significantly lower than mechanical devices that carry out the raking of IMC. The parameters of the device for lifting the IMC collected on the bottom are calculated. With the use of Kevlar ropes of serial production up to 0.06 meters in diameter, with a cycle time of up to 2 hours and a lifting speed of up to 3 meters per second, a productivity of about 400,000 tons per year can be realized for IMC. The development of machines based on the calculated parameters and approbation of their designs will create a unique complex for the extraction of minerals at oceanic deposits.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wollaeger, Ryan T.; Van Rossum, Daniel R., E-mail: wollaeger@wisc.edu, E-mail: daan@flash.uchicago.edu

Implicit Monte Carlo (IMC) and Discrete Diffusion Monte Carlo (DDMC) are methods used to stochastically solve the radiative transport and diffusion equations, respectively. These methods combine into a hybrid transport-diffusion method we refer to as IMC-DDMC. We explore a multigroup IMC-DDMC scheme that in DDMC, combines frequency groups with sufficient optical thickness. We term this procedure ''opacity regrouping''. Opacity regrouping has previously been applied to IMC-DDMC calculations for problems in which the dependence of the opacity on frequency is monotonic. We generalize opacity regrouping to non-contiguous groups and implement this in SuperNu, a code designed to do radiation transport inmore » high-velocity outflows with non-monotonic opacities. We find that regrouping of non-contiguous opacity groups generally improves the speed of IMC-DDMC radiation transport. We present an asymptotic analysis that informs the nature of the Doppler shift in DDMC groups and summarize the derivation of the Gentile-Fleck factor for modified IMC-DDMC. We test SuperNu using numerical experiments including a quasi-manufactured analytic solution, a simple 10 group problem, and the W7 problem for Type Ia supernovae. We find that opacity regrouping is necessary to make our IMC-DDMC implementation feasible for the W7 problem and possibly Type Ia supernova simulations in general. We compare the bolometric light curves and spectra produced by the SuperNu and PHOENIX radiation transport codes for the W7 problem. The overall shape of the bolometric light curves are in good agreement, as are the spectra and their evolution with time. However, for the numerical specifications we considered, we find that the peak luminosity of the light curve calculated using SuperNu is ∼10% less than that calculated using PHOENIX.« less

Radiation Transport for Explosive Outflows: Opacity Regrouping

NASA Astrophysics Data System (ADS)

Wollaeger, Ryan T.; van Rossum, Daniel R.

2014-10-01

Implicit Monte Carlo (IMC) and Discrete Diffusion Monte Carlo (DDMC) are methods used to stochastically solve the radiative transport and diffusion equations, respectively. These methods combine into a hybrid transport-diffusion method we refer to as IMC-DDMC. We explore a multigroup IMC-DDMC scheme that in DDMC, combines frequency groups with sufficient optical thickness. We term this procedure "opacity regrouping." Opacity regrouping has previously been applied to IMC-DDMC calculations for problems in which the dependence of the opacity on frequency is monotonic. We generalize opacity regrouping to non-contiguous groups and implement this in SuperNu, a code designed to do radiation transport in high-velocity outflows with non-monotonic opacities. We find that regrouping of non-contiguous opacity groups generally improves the speed of IMC-DDMC radiation transport. We present an asymptotic analysis that informs the nature of the Doppler shift in DDMC groups and summarize the derivation of the Gentile-Fleck factor for modified IMC-DDMC. We test SuperNu using numerical experiments including a quasi-manufactured analytic solution, a simple 10 group problem, and the W7 problem for Type Ia supernovae. We find that opacity regrouping is necessary to make our IMC-DDMC implementation feasible for the W7 problem and possibly Type Ia supernova simulations in general. We compare the bolometric light curves and spectra produced by the SuperNu and PHOENIX radiation transport codes for the W7 problem. The overall shape of the bolometric light curves are in good agreement, as are the spectra and their evolution with time. However, for the numerical specifications we considered, we find that the peak luminosity of the light curve calculated using SuperNu is ~10% less than that calculated using PHOENIX.

Effects of Fragmented Fe Intermetallic Compounds on Ductility in Al-Si-Mg Alloys.

PubMed

Kim, JaeHwang; Kim, DaeHwan

2018-03-01

Fe is intentionally added in order to form the Fe intermetallic compounds (Fe-IMCs) during casting. Field emission scanning electron microscope with energy dispersive spectrometer (EDS) was conducted to understand microstructural changes and chemical composition analyses. The needlelike Fe-IMCs based on two dimensional observation with hundreds of micro size are modified to fragmented particles with the minimum size of 300 nm through clod rolling with 80% thickness reduction. The ratio of Fe:Si on the fragmented Fe-IMCs after 80% reduction is close to 1:1, representing the β-Al5FeSi. The yield and tensile strengths are increased with increasing reduction rate. On the other hand, the elongation is decreased with the 40% reduction, but slightly increased with the 60% reduction. The elongation is dramatically increased over two times for the specimen of 80% reduction compared with that of the as-cast. Fracture behavior is strongly affected by the morphology and size of Fe-IMCs. The fracture mode is changed from brittle to ductile with the microstructure modification of Fe-IMCs.

Fine Pointing Of The Solar Optical Telescope In The Space Shuttle Environment

NASA Astrophysics Data System (ADS)

Gowrinathan, Sankaran

1987-02-01

Instruments attached to the payload bay of the Space Shuttle require special attention where fine pointing is involved. Fine pointing, for purposes of this discussion, is defined as sub-arc second pointing. Instruments requiring such fine pointing (Solar Optical Telescope and Shuttle Infrared Telescope, for example) will require two stages of pointing (coarse and fine). Coarse pointing will be performed by a gimbal system such as the Instrument Pointing System (IPS). Fine pointing will be provided by image motion compensation (IMC). Most forms of IMC involve adjustable optical elements in the optical system to compensate for fast transient disturbances. This paper describes work performed on the Solar Optical Telescope (SOT) concept design that illustrates IMC as applied to SOT. The fine pointing requirements on SOT dictate use of IMC at about 20 Hz. bandwidth. It will be shown that the need for this high bandwidth is related to shuttle-induced disturbances. Shuttle-induced disturbances are primarily due to two sources; man push-offs and vernier thruster firings. Both disturbance sources have high-frequency content that drive the IMC bandwidth.

Towards reasoning and coordinating action in the mental space.

PubMed

Mohan, Vishwanathan; Morasso, Pietro

2007-08-01

Unlike a purely reactive system where the motor output is exclusively controlled by the actual sensory input, a cognitive system must be capable of running mental processes which virtually simulate action sequences aimed at achieving a goal. The mental process either attempts to find a feasible course of action compatible with a number of constraints (Internal, Environmental, Task Specific etc) or selects it from a repertoire of previously learned actions, according to the parameters of the task. If neither reasoning process succeeds, a typical backup strategy is to look for a tool that might allow the operator to match all the task constraints. This further necessitates having the capability to alter ones own goal structures to generate sub-goals which must be successfully accomplished in order to achieve the primary goal. In this paper, we introduce a forward/inverse motor control architecture (FMC/IMC) that relaxes an internal model of the overall kinematic chain to a virtual force field applied to the end effector, in the intended direction of movement. This is analogous to the mechanism of coordinating the motion of a wooden marionette by means of attached strings. The relaxation of the FMC/IMC pair provides a general solution for mentally simulating an action of reaching a target position taking into consideration a range of geometric constraints (range of motion in the joint space, internal and external constraints in the workspace) as well as effort-related constraints (range of torque of the actuators, etc.). In case, the forward simulation is successful, the movement is executed; otherwise the residual "error" or measure of inconsistency is taken as a starting point for breaking the action plan into a sequence of sub actions. This process is achieved using a recurrent neural network (RNN) which coordinates the overall reasoning process of framing and issuing goals to the forward inverse models, searching for alternatives tools in solution space and formation of sub-goals based on past context knowledge and present inputs. The RNN + FMC/IMC system is able to successfully reason and coordinate a diverse range of reaching and grasping sequences with/without tools. Using a simple robotic platform (5 DOF Scorbot arm + Stereo vision) we present results of reasoning and coordination of arm/tool movements (real and mental simulation) specifically directed towards solving the classical 2-stick paradigm from animal reasoning at a non linguistic level.

Intermetallic compounds in 3D integrated circuits technology: a brief review

NASA Astrophysics Data System (ADS)

Annuar, Syahira; Mahmoodian, Reza; Hamdi, Mohd; Tu, King-Ning

2017-12-01

The high performance and downsizing technology of three-dimensional integrated circuits (3D-ICs) for mobile consumer electronic products have gained much attention in the microelectronics industry. This has been driven by the utilization of chip stacking by through-Si-via and solder microbumps. Pb-free solder microbumps are intended to replace conventional Pb-containing solder joints due to the rising awareness of environmental preservation. The use of low-volume solder microbumps has led to crucial constraints that cause several reliability issues, including excessive intermetallic compounds (IMCs) formation and solder microbump embrittlement due to IMCs growth. This article reviews technologies related to 3D-ICs, IMCs formation mechanisms and reliability issues concerning IMCs with Pb-free solder microbumps. Finally, future outlook on the potential growth of research in this area is discussed.

Intermetallic compounds in 3D integrated circuits technology: a brief review.

PubMed

Annuar, Syahira; Mahmoodian, Reza; Hamdi, Mohd; Tu, King-Ning

2017-01-01

The high performance and downsizing technology of three-dimensional integrated circuits (3D-ICs) for mobile consumer electronic products have gained much attention in the microelectronics industry. This has been driven by the utilization of chip stacking by through-Si-via and solder microbumps. Pb-free solder microbumps are intended to replace conventional Pb-containing solder joints due to the rising awareness of environmental preservation. The use of low-volume solder microbumps has led to crucial constraints that cause several reliability issues, including excessive intermetallic compounds (IMCs) formation and solder microbump embrittlement due to IMCs growth. This article reviews technologies related to 3D-ICs, IMCs formation mechanisms and reliability issues concerning IMCs with Pb-free solder microbumps. Finally, future outlook on the potential growth of research in this area is discussed.

Microstructure and Tensile Properties of Sn-1Ag-0.5Cu Solder Alloy Bearing Al for Electronics Applications

NASA Astrophysics Data System (ADS)

Shnawah, Dhafer Abdul-Ameer; Said, Suhana Binti Mohd; Sabri, Mohd Faizul Mohd; Badruddin, Irfan Anjum; Hoe, Teh Guan; Che, Fa Xing; Abood, Adnan Naama

2012-08-01

This work investigates the effects of 0.1 wt.% and 0.5 wt.% Al additions on bulk alloy microstructure and tensile properties as well as on the thermal behavior of Sn-1Ag-0.5Cu (SAC105) lead-free solder alloy. The addition of 0.1 wt.% Al reduces the amount of Ag3Sn intermetallic compound (IMC) particles and leads to the formation of larger ternary Sn-Ag-Al IMC particles. However, the addition of 0.5 wt.% Al suppresses the formation of Ag3Sn IMC particles and leads to a large amount of fine Al-Ag IMC particles. Moreover, both 0.1 wt.% and 0.5 wt.% Al additions suppress the formation of Cu6Sn5 IMC particles and lead to the formation of larger Al-Cu IMC particles. The 0.1 wt.% Al-added solder shows a microstructure with coarse β-Sn dendrites. However, the addition of 0.5 wt.% Al has a great effect on suppressing the undercooling and refinement of the β-Sn dendrites. In addition to coarse β-Sn dendrites, the formation of large Sn-Ag-Al and Al-Cu IMC particles significantly reduces the elastic modulus and yield strength for the SAC105 alloy containing 0.1 wt.% Al. On the other hand, the fine β-Sn dendrite and the second-phase dispersion strengthening mechanism through the formation of fine Al-Ag IMC particles significantly increases the elastic modulus and yield strength of the SAC105 alloy containing 0.5 wt.% Al. Moreover, both 0.1 wt.% and 0.5 wt.% Al additions worsen the elongation. However, the reduction in elongation is much stronger, and brittle fracture occurs instead of ductile fracture, with 0.5 wt.% Al addition. The two additions of Al increase both solidus and liquidus temperatures. With 0.5 wt.% Al addition the pasty range is significantly reduced and the differential scanning calorimetry (DSC) endotherm curve gradually shifts from a dual to a single endothermic peak.

A model of the interfacial processes inhibiting the environmental degradation of Al-Cu alloys

NASA Astrophysics Data System (ADS)

Kearns, Jeffery Robert

A better understanding of the composition and structure of chemically treated Al alloy surfaces is necessary to devise new, more environmentally benign, coating systems for aircraft. In this work, the surface of AA2024-T3, as well as analogs for constituent intermetallic compounds (IMC), were examined at various stages of the Al alloy pretreatment and chromate conversion coating (CCC) process. A complement of techniques were used: imaging and dyanmic Secondary Ion Mass Spectroscopy (SIMS), Variable-Angle X-ray Photoelectron Spectroscopy (VA/XPS), Synchrotron Infrared Microspectroscopy (SIRS), X-ray Absorption Spectroscopy (XAS), and Electrochemical Impedance Spectroscopy (EIS). The water and hydrocarbons in commercial CCC destabilized Cr(VI) during exposure to soft x-rays. However, it was possible to prevent photochemical reduction with the ultra-clean vacuum pumping practice recently developed at Stony Brook. The type of pretreatment used prior to chromate conversion coating influenced the extent of IMC removal, Cu (re)distribution, and surface activity. Cu(I) was observed on all the chemically treated surfaces. Samples pretreated in Sanchem 1000 while galvanically coupled to a Pt mesh had a more desirable distribution of Cu for subsequent processing. Chromate reduction was not a significant factor in CCC aging over a 24-hr period, but surface dehydration and structural change were correlated and causative. Imaging SIMS revealed heterogeneities in the CCC that varied laterally with IMC in the alloy substrate. These regions were depleted in compounds containing Cr, F, and CN. Cu was found at localized sites in the CCC contact surface. Cyano groups were bound as Cr(IlI)-CNFe(H). The chromate available for CCC repair was located on matrix regions through the entire bulk of the CCC. The presence of residual contaminants (e.g. cleaning agents, metal working fluid, ink) affected the distribution of activator compounds (e.g. ferricyanide) in a CCC. The cyanide complex (Cr(Ill)-Fe-CN6) was found in the CCC bulk not just at the outermost surface. A new model for CCC on Al-Cr alloys is proposed. The model is based on the sol-gel-like nascent CCC that limits the transport of IMC dissolution products.

Intermetallic compounds in 3D integrated circuits technology: a brief review

PubMed Central

Annuar, Syahira; Mahmoodian, Reza; Hamdi, Mohd; Tu, King-Ning

2017-01-01

Abstract The high performance and downsizing technology of three-dimensional integrated circuits (3D-ICs) for mobile consumer electronic products have gained much attention in the microelectronics industry. This has been driven by the utilization of chip stacking by through-Si-via and solder microbumps. Pb-free solder microbumps are intended to replace conventional Pb-containing solder joints due to the rising awareness of environmental preservation. The use of low-volume solder microbumps has led to crucial constraints that cause several reliability issues, including excessive intermetallic compounds (IMCs) formation and solder microbump embrittlement due to IMCs growth. This article reviews technologies related to 3D-ICs, IMCs formation mechanisms and reliability issues concerning IMCs with Pb-free solder microbumps. Finally, future outlook on the potential growth of research in this area is discussed. PMID:29057024

Decision-Making in Flight with Different Convective Weather Information Sources: Preliminary Results

NASA Technical Reports Server (NTRS)

Latorella, Kara A.; Chamberlain, James P.

2004-01-01

This paper reports preliminary and partial results of a flight experiment to address how General Aviation (GA) pilots use weather cues to make flight decisions. This research presents pilots with weather cue conditions typically available to GA pilots in visual meteorological conditions (VMC) and instrument meteorological conditions (IMC) today, as well as in IMC with a Graphical Weather Information System (GWIS). These preliminary data indicate that both VMC and GWIS-augmented IMC conditions result in better confidence, information sufficiency and perceived performance than the current IMC condition. For all these measures, the VMC and GWIS-augmented conditions seemed to provide similar pilot support. These preliminary results are interpreted for their implications on GWIS display design, training, and operational use guidelines. Final experimental results will compare these subjective data with objective data of situation awareness and decision quality.

Applying Bayesian Modeling and Receiver Operating Characteristic Methodologies for Test Utility Analysis

ERIC Educational Resources Information Center

Wang, Qiu; Diemer, Matthew A.; Maier, Kimberly S.

2013-01-01

This study integrated Bayesian hierarchical modeling and receiver operating characteristic analysis (BROCA) to evaluate how interest strength (IS) and interest differentiation (ID) predicted low–socioeconomic status (SES) youth's interest-major congruence (IMC). Using large-scale Kuder Career Search online-assessment data, this study fit three…

Study on Joint Interface and Mechanical Properties of Cu/Pb-Sn/Cu Lap Joint Produced by Friction Stir Soldering Process

NASA Astrophysics Data System (ADS)

Sarkari Khorrami, Mahmoud; Kokabi, Amir Hossein; Movahedi, Mojtaba

2015-05-01

In this work, friction stir soldering (FSS) as a new approach for fabrication of copper/copper lap joints was introduced. This process is principally based on the friction stir processing (FSP) that can be performed using FSP tools with and without pin on the top sheet. In the present study, Pb-Sn foil was used as a solder which would be melted and then extruded in the area between the copper sheets during FSS process. This process was carried out using tools with and without pin at various rotation speeds of 1200, 1400, and 1600 rpm and traverse speed of 32 mm/min. Also, the same joint was fabricated using furnace soldering to compare the mechanical properties obtained with FSS and furnace soldering processes. It was observed that FSS possesses some advantages over the conventional furnace soldering process including the formation of more bond area at the interface corresponding to the higher fracture load of FSS joints compared with furnace soldering one. Moreover, it was concluded that the thickness of intermetallic compounds (IMCs) and the formation of voids at the joint interface were the predominant factor determining the mechanical properties of the FSS joints produced by FSS tool with and without pin, respectively. The microstructural examinations revealed that Cu-Sn IMCs of Cu3Sn and Cu6Sn5 were formed at the joint interface. It was observed that the FSS joint produced by tool with pin experienced the more peak temperature in comparison with that produced by pin-free tool. This may lead to the formation of thicker IMCs at the interface. Of course, the thickness of IMCs can be controlled by choosing proper FSS parameters, especially the rotation speed of the tool.

Four decades of implicit Monte Carlo

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wollaber, Allan B.

In 1971, Fleck and Cummings derived a system of equations to enable robust Monte Carlo simulations of time-dependent, thermal radiative transfer problems. Denoted the “Implicit Monte Carlo” (IMC) equations, their solution remains the de facto standard of high-fidelity radiative transfer simulations. Over the course of 44 years, their numerical properties have become better understood, and accuracy enhancements, novel acceleration methods, and variance reduction techniques have been suggested. In this review, we rederive the IMC equations—explicitly highlighting assumptions as they are made—and outfit the equations with a Monte Carlo interpretation. We put the IMC equations in context with other approximate formsmore » of the radiative transfer equations and present a new demonstration of their equivalence to another well-used linearization solved with deterministic transport methods for frequency-independent problems. We discuss physical and numerical limitations of the IMC equations for asymptotically small time steps, stability characteristics and the potential of maximum principle violations for large time steps, and solution behaviors in an asymptotically thick diffusive limit. We provide a new stability analysis for opacities with general monomial dependence on temperature. Here, we consider spatial accuracy limitations of the IMC equations and discussion acceleration and variance reduction techniques.« less

A technique for estimating the probability of radiation-stimulated failures of integrated microcircuits in low-intensity radiation fields: Application to the Spektr-R spacecraft

NASA Astrophysics Data System (ADS)

Popov, V. D.; Khamidullina, N. M.

2006-10-01

In developing radio-electronic devices (RED) of spacecraft operating in the fields of ionizing radiation in space, one of the most important problems is the correct estimation of their radiation tolerance. The “weakest link” in the element base of onboard microelectronic devices under radiation effect is the integrated microcircuits (IMC), especially of large scale (LSI) and very large scale (VLSI) degree of integration. The main characteristic of IMC, which is taken into account when making decisions on using some particular type of IMC in the onboard RED, is the probability of non-failure operation (NFO) at the end of the spacecraft’s lifetime. It should be noted that, until now, the NFO has been calculated only from the reliability characteristics, disregarding the radiation effect. This paper presents the so-called “reliability” approach to determination of radiation tolerance of IMC, which allows one to estimate the probability of non-failure operation of various types of IMC with due account of radiation-stimulated dose failures. The described technique is applied to RED onboard the Spektr-R spacecraft to be launched in 2007.

Four decades of implicit Monte Carlo

DOE PAGES

Wollaber, Allan B.

2016-02-23

In 1971, Fleck and Cummings derived a system of equations to enable robust Monte Carlo simulations of time-dependent, thermal radiative transfer problems. Denoted the “Implicit Monte Carlo” (IMC) equations, their solution remains the de facto standard of high-fidelity radiative transfer simulations. Over the course of 44 years, their numerical properties have become better understood, and accuracy enhancements, novel acceleration methods, and variance reduction techniques have been suggested. In this review, we rederive the IMC equations—explicitly highlighting assumptions as they are made—and outfit the equations with a Monte Carlo interpretation. We put the IMC equations in context with other approximate formsmore » of the radiative transfer equations and present a new demonstration of their equivalence to another well-used linearization solved with deterministic transport methods for frequency-independent problems. We discuss physical and numerical limitations of the IMC equations for asymptotically small time steps, stability characteristics and the potential of maximum principle violations for large time steps, and solution behaviors in an asymptotically thick diffusive limit. We provide a new stability analysis for opacities with general monomial dependence on temperature. Here, we consider spatial accuracy limitations of the IMC equations and discussion acceleration and variance reduction techniques.« less

Characterization of Elastic-plastic Material Properties for IMC Layer of ENEPIG by Using Reverse Algorithm

NASA Astrophysics Data System (ADS)

Kim, Jong-Min; Lee, Hyun-Boo; Chang, Yoon-Suk; Choi, Jae-Boong; Kim, Young-Jin; Ji, Kum-Young

2010-05-01

Recently, the reliability assurance of lead-free solder to prevent environmental contamination is quite important issue for chip-scale packaging. Although lots of efforts have been devoted to the solder undergone drop, shear and creep loads, there was a little research on IMC due primarily to its thickness restriction and geometric irregularity. However, the IMC is known as the weakest layer governing failures of the solder joint. The present work is to characterize realistic material properties of the IMC for ENEPIG process. Lee's modified reverse algorithm was adopted to determine elastic-plastic stress-strain curve and so forth, after examining several methods, which requires inherently elastic data. In this context, a series of nano-indentation tests as well as corresponding simulations were carried out by changing indentation depths from 200 to 400 nm and strain rates from 0.05 to 0.10 1/s. It would be conclude that effect of strain rate is relatively small and IMC layer should be more than 5 times of indentation depth when using the recommended method, which are applicable to generate realistic material properties for further diverse structural integrity simulations.

Dyadic Associations Between Physical Activity and Depressive Symptoms in Older Adults with Musculoskeletal Conditions and Their Spouses

PubMed Central

Monin, Joan K.; Chen, Baibing; Stahl, Sarah T.

2014-01-01

This study examined the association between physical activity of older individuals with musculoskeletal conditions (IMCs) and their spouses’ physical activity, how physical activity related to one’s own and one’s partner’s depressive symptoms, and whether the similarity of partners’ physical activity related to each partner’s depressive symptoms using the actor–partner interdependence model. Seventy-seven dyads completed self-report measures of physical activity, depressive symptoms and potential covariates (socio-demographics, physical health conditions and marital satisfaction; IMCs’ functional impairment and pain; and spouses’ support-related stress). As hypothesized, we found a positive association between the IMC’s and the spouse’s physical activity. Also, spouses had more depressive symptoms when IMCs engaged in less physical activity. However, for both partners, one’s own physical activity was not significantly associated with one’s own depressive symptoms. The spouse’s physical activity was also not significantly associated with the IMC’s depressive symptoms, and the similarity between partners’ physical activity did not significantly relate to either partner’s depressive symptoms. Our findings suggest that interventions that help increase the physical activity of both partners, but particularly IMCs, may benefit spouses’ well-being. PMID:25053173

First Monte Carlo analysis of fragmentation functions from single-inclusive e + e - annihilation

DOE PAGES

Sato, Nobuo; Ethier, J. J.; Melnitchouk, W.; ...

2016-12-02

Here, we perform the first iterative Monte Carlo (IMC) analysis of fragmentation functions constrained by all available data from single-inclusive $e^+ e^-$ annihilation into pions and kaons. The IMC method eliminates potential bias in traditional analyses based on single fits introduced by fixing parameters not well contrained by the data, and provides a statistically rigorous determination of uncertainties. Our analysis reveals specific features of fragmentation functions using the new IMC methodology and those obtained from previous analyses, especially for light quarks and for strange quark fragmentation to kaons.

Evaluation of Laser Braze-welded Dissimilar Al-Cu Joints

NASA Astrophysics Data System (ADS)

Schmalen, Pascal; Plapper, Peter

The thermal joining of Aluminum and Copper is a promising technology towards automotive battery manufacturing. The dissimilar metals Al-Cu are difficult to weld due to their different physicochemical characteristics and the formation of intermetallic compounds (IMC), which have reduced mechanical and electric properties. There is a critical thickness of the IMCs where the favored mechanical properties of the base material can be preserved. The laser braze welding principle uses a position and power oscillated laser-beam to reduce the energy input and the intermixture of both materials and therefore achieves minimized IMCs thickness. The evaluation of the weld seam is important to improve the joint performance and enhance the welding process. This paper is focused on the characterization and quantification of the IMCs. Mechanical, electrical and metallurgical methods are presented and performed on Al1050 and SF-Cu joints and precise weld criteria are developed.

Viscoelastic wormlike micelles formed by ionic liquid-type surfactant [C16imC8]Br towards template-assisted synthesis of CdS quantum dots.

PubMed

Hu, Yimin; Han, Jie; Ge, Lingling; Guo, Rong

2018-01-31

In this paper, viscoelastic wormlike micelles consisting of cationic liquid-type surfactant, 1-hexadecyl-3-octyl imidazolium bromide ([C 16 imC 8 ]Br), water and different additives were utilized for the synthesis of CdS quantum dots. First, the influence of different additives, such as [Cd(NH 3 ) 6 ]Cl 2 and ethanethioamid (precursors for the synthesis of CdS quantum dots), and temperature on the viscoelasticity of the [C 16 imC 8 ]Br aqueous solution was studied by dynamic and steady rheology. Furthermore, the synthesized CdS quantum dots and their photoluminescence properties were characterized by transmission electron microscopy (TEM), UV-Vis absorption spectroscopy, X-ray diffraction (XRD) and energy-dispersive X-ray spectroscopy (EDX). In the end, the mechanism for the synthesis of CdS quantum dots in [C 16 imC 8 ]Br wormlike micelles is proposed.

Effects of post-reflow cooling rate and thermal aging on growth behavior of interfacial intermetallic compound between SAC305 solder and Cu substrate

NASA Astrophysics Data System (ADS)

Hu, Xiaowu; Xu, Tao; Jiang, Xiongxin; Li, Yulong; Liu, Yi; Min, Zhixian

2016-04-01

The interfacial reactions between Cu and Sn3Ag0.5Cu (SAC305) solder reflowed under various cooling rates were investigated. It is found that the cooling rate is an important parameter in solder reflow process because it influences not only microstructure of solder alloy but also the morphology and growth of intermetallic compounds (IMCs) formed between solder and Cu substrate. The experimental results indicate that only scallop-like Cu6Sn5 IMC layer is observed between solder and Cu substrate in case of water cooling and air cooling, while bilayer composed of scallop-like Cu6Sn5 and thin layer-like Cu3Sn is detected under furnace cooling due to sufficient reaction time to form Cu3Sn between Cu6Sn5 IMC and Cu substrate which resulted from slow cooling rate. Samples with different reflow cooling rates were further thermal-aged at 423 K. And it is found that the thickness of IMC increases linearly with square root of aging time. The growth constants of interfacial IMC layer during aging were obtained and compared for different cooling rates, indicating that the IMC layer thickness increased faster in samples under low cooling rate than in the high cooling rate under the same aging condition. The long prismatic grains were formed on the existing interfacial Cu6Sn5 grains to extrude deeply into solder matrix with lower cooling rate and long-term aging, and the Cu6Sn5 grains coarsened linearly with cubic root of aging time.

Development of a specific immunomagnetic capture-PCR for rapid detection of viable Mycoplasma agalactiae in sheep milk samples.

PubMed

Sanna, G; Lecca, V; Foddai, A; Tola, S

2014-12-01

To develop an immunomagnetic capture (IMC) to detect viable Mycoplasma agalactiae in routine ovine milk samples. Polyclonal antibodies against two M. agalactiae membrane surface proteins (P80 and P55) were covalently conjugated to magnetic beads (MBs) to form MB-Ab80 and MB-Ab55. Mycoplasma agalactiae cells were captured by a specific antigen-antibody reaction and magnetic separation. Immunomagnetic capture (IMC) was used to isolate and concentrate M. agalactiae in serial decimal dilutions and in artificially contaminated milk to facilitate subsequent detection by PCR. A 375-bp fragment of M. agalactiae was amplified using a pair of M. agalactiae-specific primers in PCR. The limit of detection of IMC-PCR method ranged from 10 to 10(2)  CCU ml(-1) when mycoplasmas were resuspended in PBS and from 10(2) to 10(3)  CCU ml(-1) when mycoplasmas were resuspended in uncontaminated ovine milk. This study also describes the application of IMC-PCR method to test for M. agalactiae in 516 milk samples collected from sheep with suspected contagious agalactia. Its performance was evaluated relative to culture. This report has demonstrated for the first time, the effective use of rapid and reliable IMC combined with PCR assay for the detection of viable M. agalactiae. The method IMC-PCR provides an alternative to conventional microbiological detection, method and it could be applied to quick detection of M. agalactiae in routine sheep milk samples. © 2014 The Authors published by John Wiley & Sons Ltd on behalf of Society for Applied Microbiology.

Results of a survey regarding irradiation of internal mammary chain in patients with breast cancer: practice is culture driven rather than evidence based.

PubMed

Taghian, Alphonse; Jagsi, Reshma; Makris, Andreas; Goldberg, Saveli; Ceilley, Elizabeth; Grignon, Laurent; Powell, Simon

2004-11-01

To examine the self-reported practice patterns of radiation oncologists in North America and Europe regarding radiotherapy to the internal mammary lymph node chain (IMC) in breast cancer patients. A survey questionnaire was sent in 2001 to physician members of the American Society for Therapeutic Radiology and Oncology and European Society for Therapeutic Radiology and Oncology regarding their management of breast cancer. Respondents were asked whether they would treat the IMC in several clinical scenarios. A total of 435 responses were obtained from European and 702 responses from North American radiation oncologists. Respondents were increasingly likely to report IMC irradiation in scenarios with greater axillary involvement. Responses varied widely among different European regions, the United States, and Canada (p < 0.01). European respondents were more likely to treat the IMC (p < 0.01) than their North American counterparts. Academic physicians were more likely to treat the IMC than those in nonacademic positions (p < 0.01). The results of this study revealed significant international variation in attitudes regarding treatment of the IMC. The international patterns of variation mirror the divergent conclusions of studies conducted in the different regions, indicating that physicians may rely preferentially on evidence from local studies when making difficult treatment decisions. These variations in self-reported practice patterns indicate the need for greater data in this area, particularly from international cooperative trials. The cultural predispositions documented in this study are important to recognize, because they may continue to affect physician attitudes and practices, even as greater evidence accumulates.

Keypunching Manual. Third Edition.

ERIC Educational Resources Information Center

Oldsen, Carl F.; Spagnuolo, Lenore

Presented in the manual are keypunching procedures with associated representative forms and keypunching cards for bibliographies and five basic types of abstracts which are used with the Control Data 3600 computer by the Michigan State University Materials Center for Handicapped Children and Youth (IMC HCY). Emphasis is given to keypunching all…

IFR Operations at Non-Towered, Non-Radar Airports: Can we do Better Than One-at-a-Time?

NASA Technical Reports Server (NTRS)

Jones, K.; Williams, D.; Consiglio, M.; Adams, C.; Abbott, T.

2003-01-01

This paper describes a new concept for operations in non-radar terminal airspace around small, nontowered airports. Currently, air traffic operations in instrument meteorological conditions (IMC) at airfields without control towers and radar service are severely constrained by what is known as the one-in/one-out paradigm. Under these conditions only one operation (either arrival or departure) is allowed to occur at a time. Since these operations can take over 15 minutes to complete, capacity at these airports is severely restricted in IMC. The proposed concept is an attempt to break this current paradigm by applying emerging airborne and ground-based technologies to enable simultaneous operations by multiple aircraft in nonradar terminal airspace around small non-towered airports in IMC. The general philosophy underlying this concept of operations is the establishment of a newly defined area surrounding these airports called a Self-Controlled Area (SCA). Aircraft operating within the SCA are required to have a specified minimum level of equipage. Within the SCA, pilots are responsible for separating themselves from other similarly equipped aircraft through the use of new onboard systems and procedures. This concept also takes advantage of newly developed automation at the airport, which provides appropriate sequencing information to the pilots for safe and improved operations. Such operations would enhance the opportunity for point-to-point air taxi or charter operations into smaller airfields that are closer to a traveler s origin and destination. A description of this concept of operations and a simulation environment used for evaluation is provided in this paper.

Branson: A Mini-App for Studying Parallel IMC, Version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Long, Alex

This code solves the gray thermal radiative transfer (TRT) equations in parallel using simple opacities and Cartesian meshes. Although Branson solves the TRT equations it is not designed to model radiation transport: Branson contains simple physics and does not have a multigroup treatment, nor can it use physical material data. The opacities have are simple polynomials in temperature there is a limited ability to specify complex geometries and sources. Branson was designed only to capture the computational demands of production IMC codes, especially in large parallel runs. It was also intended to foster collaboration with vendors, universities and other DOEmore » partners. Branson is similar in character to the neutron transport proxy-app Quicksilver from LLNL, which was recently open-sourced.« less

Intestinal and peritoneal mast cells differ in kinetics of quantal release

DOE Office of Scientific and Technical Information (OSTI.GOV)

Balseiro-Gomez, Santiago, E-mail: sanbalgom@alum.us.es; Ramirez-Ponce, M. Pilar, E-mail: pponce@us.es; Acosta, Jorge, E-mail: jorgealo@us.es

2016-01-15

5-hydroxytriptamine (5-HT, serotonin) storage and release in mast cell (MC) secretory granules (SG) are dependent on serglycin proteoglycans (PG). This notion is based on the studies of MC of the connective tissue subtype that predominantly contain PG of the heparin type, whereas intestinal mucosal MC, which contain predominantly chondroitin sulfate, have been poorly explored. In the present study, we addressed the possibility that PG contents may differently affect the storage and release of preformed mediators in these two MC subclasses and explain in part their different functional properties. Rat peritoneal (PMC) and intestinal mast cells (IMC) were isolated and purifiedmore » using a percoll gradient, and the efflux of 5-HT from each SG was measured by amperometric detection. IMC exhibited a ∼34% reduction in the release of 5-HT compared with PMC because of a lower number of exocytotic events, rather than a lower secretion per single exocytotic event. Amperometric spikes from IMC exhibited a slower decay phase and increased half-width but a similar ascending phase and foot parameters, indicating that the fusion pore kinetics are comparable in both MC subclasses. We conclude that both PG subtypes are equally efficient systems, directly involved in serotonin accumulation, and play a crucial role in regulating the kinetics of exocytosis from SG, providing specific secretory properties for the two cellular subtypes. - Highlights: • We improved a method for isolating and purifying IMC. • There was a reduction in total serotonin release in IMC with respect to PMC. • This decrease was not due to less secretion per quantum but a lower number of exocytotic events. • There was also a deceleration of exocytosis in IMC with respect to PMC.« less

Solid-State NMR Investigation of Drug-Excipient Interactions and Phase Behavior in Indomethacin-Eudragit E Amorphous Solid Dispersions.

PubMed

Lubach, Joseph W; Hau, Jonathan

2018-02-20

To investigate the nature of drug-excipient interactions between indomethacin (IMC) and methacrylate copolymer Eudragit® E (EE) in the amorphous state, and evaluate the effects on formulation and stability of these amorphous systems. Amorphous solid dispersions containing IMC and EE were spray dried with drug loadings from 20% to 90%. PXRD was used to confirm the amorphous nature of the dispersions, and DSC was used to measure glass transition temperatures (T g ). 13 C and 15 N solid-state NMR was utilized to investigate changes in local structure and protonation state, while 1 H T 1 and T 1ρ relaxation measurements were used to probe miscibility and phase behavior of the dispersions. T g values for IMC-EE solid dispersions showed significant positive deviations from predicted values in the drug loading range of 40-90%, indicating a relatively strong drug-excipient interaction. 15 N solid-state NMR exhibited a change in protonation state of the EE basic amine, with two distinct populations for the EE amine at -360.7 ppm (unprotonated) and -344.4 ppm (protonated). Additionally, 1 H relaxation measurements showed phase separation at high drug load, indicating an amorphous ionic complex and free IMC-rich phase. PXRD data showed all ASDs up to 90% drug load remained physically stable after 2 years. 15 N solid-state NMR experiments show a change in protonation state of EE, indicating that an ionic complex indeed forms between IMC and EE in amorphous solid dispersions. Phase behavior was determined to exhibit nanoscale phase separation at high drug load between the amorphous ionic complex and excess free IMC.

Valorisation of waste ilmenite mud in the manufacture of sulphur polymer cement.

PubMed

Contreras, Manuel; Gázquez, Manuel Jesús; García-Díaz, Irene; Alguacil, Francisco J; López, Félix A; Bolívar, Juan Pedro

2013-10-15

This paper reports the preparation of sulphur polymer cements (SPCs) incorporating waste ilmenite mud for use in concrete construction works. The ilmenite mud raw material and the mud-containing SPCs (IMC-SPCs) were characterised physico-chemically and radiologically. The optimal IMC-SPC mixture had a sulphur/mud ratio (w/w) of 1.05 (mud dose 20 wt%); this cement showed the greatest compressive strength (64 MPa) and the lowest water absorption coefficient (0.4 g cm(-2) at 28 days). Since ilmenite mud is enriched in natural radionuclides, such as radium isotopes (2.0·10(3) Bq kg(-1)(228)Ra and 5.0·10(2) Bq kg(-1)(226)Ra), the IMC-SPCs were subjected to leaching experiments, which showed their environmental impact to be negligible. The activity concentration indices for the different radionuclides in the IMC-SPCs containing 10% and 20% ilmenite mud met the demands of international standards for materials used in the construction of non-residential buildings. Copyright © 2013 Elsevier Ltd. All rights reserved.

Aerosol properties from spectral extinction and backscatter estimated by an inverse Monte Carlo method.

PubMed

Ligon, D A; Gillespie, J B; Pellegrino, P

2000-08-20

The feasibility of using a generalized stochastic inversion methodology to estimate aerosol size distributions accurately by use of spectral extinction, backscatter data, or both is examined. The stochastic method used, inverse Monte Carlo (IMC), is verified with both simulated and experimental data from aerosols composed of spherical dielectrics with a known refractive index. Various levels of noise are superimposed on the data such that the effect of noise on the stability and results of inversion can be determined. Computational results show that the application of the IMC technique to inversion of spectral extinction or backscatter data or both can produce good estimates of aerosol size distributions. Specifically, for inversions for which both spectral extinction and backscatter data are used, the IMC technique was extremely accurate in determining particle size distributions well outside the wavelength range. Also, the IMC inversion results proved to be stable and accurate even when the data had significant noise, with a signal-to-noise ratio of 3.

Source-Message-Receiver in Integrated Marketing Communication

ERIC Educational Resources Information Center

Broussard, Sharee LeBlanc

2011-01-01

This is an abbreviation of the author's dissertation. Because integrated marketing communication (IMC) research has traditionally been problematic, this study used an existing scale to determine that higher educational institutional advancement (alumni, marketing-communications, development) is an appropriate venue to study the process model of…

[Not Available].

PubMed

Zubiaga, Lorea; Ruiz-Tovar, Jaime; Giner, Lorena; González, Juan; Aguilar, María Del Mar; García, Alejandro; Calpena, Rafael; Durán, Manuel

2016-07-19

Introducción y objetivo: el IMC puede resultar engañoso para ciertas complexiones corporales, por lo que se han propuesto otros parámetros como la adiposidad (calculada a través de fórmula CUN-BAE,) el índice de Framingham de riesgo cardiovascular (IF) y el índice aterogénico (IA) (rCT/HDL-c) como predictores de riesgo cardiovascular. Se propone comparar estos factores como marcadores de éxito terapéutico tras cirugía en pacientes obesos sometidos a gastrectomía vertical laparoscópica (GVL) como procedimiento de cirugía bariátrica.Material y métodos: realizamos un estudio observacional prospectivo de pacientes sometidos a GVL y con un periodo de seguimiento mínimo de 1 año. Analizamos la evolución de IMC, adiposidad, IF e IA.Resultados: analizamos 140 pacientes. El IMC preoperatorio fue de 49,1 kg/m2, con una adiposidad del 54,8%, un IF 7,54% y un IA de 4,2. A los 12 meses el IMC era de 28,4 kg/m2, con una adiposidad del 39,4%, un IF del 3,7% y un IA de 1,64. En función de estos resultados, a los 12 meses el IMC medio está en rango de sobrepeso, la adiposidad en niveles de obesidad (obesidad: > 25% en hombres y > 35% en mujeres), el IF en rango de riesgo cardiovascular bajo (< 5%) y el IA dentro del rango de normalidad (< 3). Correlacionando estos parámetros observamos que el IMC se correlaciona con la adiposidad tanto en valores preoperatorios (Pearson 0,486; p = 0,004), posoperatorios (Pearson 0,957; p < 0,001), como en la diferencia entre ambos (Pearson 0,606; p = 0,017), lo cual es lógico, porque el IMC se incluye en la fórmula CUN-BAE para el cálculo de la adiposidad. En los valores posoperatorios se objetiva una correlación de la adiposidad con el IF (Pearson 0,814, p = 0,036) y con el IA (Pearson 0,517; p = 0,049). En los valores preoperatorios no se objetivan dichas correlaciones. El IMC no se correlacionó con la adiposidad.Conclusión: la adiposidad se correlaciona con índices de riesgo cardiovascular, como el índice de Framingham o el índice aterogénico, pero solo en las determinaciones posoperatorias. Estos elementos suponen herramientas útiles para valorar la disminución del riesgo de enfermedad cardiovascular después de cirugía bariátrica.

Molecular population dynamics of DNA structures in a bcl-2 promoter sequence is regulated by small molecules and the transcription factor hnRNP LL

PubMed Central

Cui, Yunxi; Koirala, Deepak; Kang, HyunJin; Dhakal, Soma; Yangyuoru, Philip; Hurley, Laurence H.; Mao, Hanbin

2014-01-01

Minute difference in free energy change of unfolding among structures in an oligonucleotide sequence can lead to a complex population equilibrium, which is rather challenging for ensemble techniques to decipher. Herein, we introduce a new method, molecular population dynamics (MPD), to describe the intricate equilibrium among non-B deoxyribonucleic acid (DNA) structures. Using mechanical unfolding in laser tweezers, we identified six DNA species in a cytosine (C)-rich bcl-2 promoter sequence. Population patterns of these species with and without a small molecule (IMC-76 or IMC-48) or the transcription factor hnRNP LL are compared to reveal the MPD of different species. With a pattern recognition algorithm, we found that IMC-48 and hnRNP LL share 80% similarity in stabilizing i-motifs with 60 s incubation. In contrast, IMC-76 demonstrates an opposite behavior, preferring flexible DNA hairpins. With 120–180 s incubation, IMC-48 and hnRNP LL destabilize i-motifs, which has been previously proposed to activate bcl-2 transcriptions. These results provide strong support, from the population equilibrium perspective, that small molecules and hnRNP LL can modulate bcl-2 transcription through interaction with i-motifs. The excellent agreement with biochemical results firmly validates the MPD analyses, which, we expect, can be widely applicable to investigate complex equilibrium of biomacromolecules. PMID:24609386

A linear stability analysis for nonlinear, grey, thermal radiative transfer problems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wollaber, Allan B., E-mail: wollaber@lanl.go; Larsen, Edward W., E-mail: edlarsen@umich.ed

2011-02-20

We present a new linear stability analysis of three time discretizations and Monte Carlo interpretations of the nonlinear, grey thermal radiative transfer (TRT) equations: the widely used 'Implicit Monte Carlo' (IMC) equations, the Carter Forest (CF) equations, and the Ahrens-Larsen or 'Semi-Analog Monte Carlo' (SMC) equations. Using a spatial Fourier analysis of the 1-D Implicit Monte Carlo (IMC) equations that are linearized about an equilibrium solution, we show that the IMC equations are unconditionally stable (undamped perturbations do not exist) if {alpha}, the IMC time-discretization parameter, satisfies 0.5 < {alpha} {<=} 1. This is consistent with conventional wisdom. However, wemore » also show that for sufficiently large time steps, unphysical damped oscillations can exist that correspond to the lowest-frequency Fourier modes. After numerically confirming this result, we develop a method to assess the stability of any time discretization of the 0-D, nonlinear, grey, thermal radiative transfer problem. Subsequent analyses of the CF and SMC methods then demonstrate that the CF method is unconditionally stable and monotonic, but the SMC method is conditionally stable and permits unphysical oscillatory solutions that can prevent it from reaching equilibrium. This stability theory provides new conditions on the time step to guarantee monotonicity of the IMC solution, although they are likely too conservative to be used in practice. Theoretical predictions are tested and confirmed with numerical experiments.« less

A linear stability analysis for nonlinear, grey, thermal radiative transfer problems

NASA Astrophysics Data System (ADS)

Wollaber, Allan B.; Larsen, Edward W.

2011-02-01

We present a new linear stability analysis of three time discretizations and Monte Carlo interpretations of the nonlinear, grey thermal radiative transfer (TRT) equations: the widely used “Implicit Monte Carlo” (IMC) equations, the Carter Forest (CF) equations, and the Ahrens-Larsen or “Semi-Analog Monte Carlo” (SMC) equations. Using a spatial Fourier analysis of the 1-D Implicit Monte Carlo (IMC) equations that are linearized about an equilibrium solution, we show that the IMC equations are unconditionally stable (undamped perturbations do not exist) if α, the IMC time-discretization parameter, satisfies 0.5 < α ⩽ 1. This is consistent with conventional wisdom. However, we also show that for sufficiently large time steps, unphysical damped oscillations can exist that correspond to the lowest-frequency Fourier modes. After numerically confirming this result, we develop a method to assess the stability of any time discretization of the 0-D, nonlinear, grey, thermal radiative transfer problem. Subsequent analyses of the CF and SMC methods then demonstrate that the CF method is unconditionally stable and monotonic, but the SMC method is conditionally stable and permits unphysical oscillatory solutions that can prevent it from reaching equilibrium. This stability theory provides new conditions on the time step to guarantee monotonicity of the IMC solution, although they are likely too conservative to be used in practice. Theoretical predictions are tested and confirmed with numerical experiments.

The Effectiveness of Al-Si Coatings for Preventing Interfacial Reaction in Al-Mg Dissimilar Metal Welding

NASA Astrophysics Data System (ADS)

Wang, Yin; Al-Zubaidy, Basem; Prangnell, Philip B.

2018-01-01

The dissimilar welding of aluminum to magnesium is challenging because of the rapid formation of brittle intermetallic compounds (IMC) at the weld interface. An Al-Si coating interlayer was selected to address this problem, based on thermodynamic calculations which predicted that silicon would change the reaction path to avoid formation of the normally observed binary Al-Mg IMC phases ( β-Al3Mg2 and γ-Al12Mg17). Long-term static heat treatments confirmed that a Si-rich coating will preferentially produce the Mg2Si phase in competition with the less stable, β-Al3Mg2 and γ-Al12Mg17 binary IMC phases, and this reduced the overall reaction layer thickness. However, when an Al-Si clad sheet was tested in a real welding scenario, using the Refill™ friction stir spot welding (FSSW) technique, Mg2Si was only produced in very small amounts owing to the much shorter reaction time. Surprisingly, the coating still led to a significant reduction in the IMC reaction layer thickness and the welds exhibited enhanced mechanical performance, with improved strength and fracture energy. This beneficial behavior has been attributed to the softer coating material both reducing the welding temperature and giving rise to the incorporation of Si particles into the reaction layer, which toughened the brittle interfacial IMC phases during crack propagation.

Effect of Joint Scale and Processing on the Fracture of Sn-3Ag-0.5Cu Solder Joints: Application to Micro-bumps in 3D Packages

NASA Astrophysics Data System (ADS)

Talebanpour, B.; Huang, Z.; Chen, Z.; Dutta, I.

2016-01-01

In 3-dimensional (3D) packages, a stack of dies is vertically connected to each other using through-silicon vias and very thin solder micro-bumps. The thinness of the micro-bumps results in joints with a very high volumetric proportion of intermetallic compounds (IMCs), rendering them much more brittle compared to conventional joints. Because of this, the reliability of micro-bumps, and the dependence thereof on the proportion of IMC in the joint, is of substantial concern. In this paper, the growth kinetics of IMCs in thin Sn-3Ag-0.5Cu joints attached to Cu substrates were analyzed, and empirical kinetic laws for the growth of Cu6Sn5 and Cu3Sn in thin joints were obtained. Modified compact mixed mode fracture mechanics samples, with adhesive solder joints between massive Cu substrates, having similar thickness and IMC content as actual micro-bumps, were produced. The effects of IMC proportion and strain rate on fracture toughness and mechanisms were investigated. It was found that the fracture toughness G C decreased with decreasing joint thickness ( h Joint). In addition, the fracture toughness decreased with increasing strain rate. Aging also promoted alternation of the crack path between the two joint-substrate interfaces, possibly proffering a mechanism to enhance fracture toughness.

THE ROLE OF METABOLIC SURGERY FOR PATIENTS WITH OBESITY GRADE I AND TYPE 2 DIABETES NOT CONTROLLED CLINICALLY.

PubMed

Campos, Josemberg; Ramos, Almino; Szego, Thomaz; Zilberstein, Bruno; Feitosa, Heládio; Cohen, Ricardo

Even considering the advance of the medical treatment in the last 20 years with new and more effective drugs, the outcomes are still disappointing as the control of obesity and type 2 Diabetes Mellitus (T2DM) with a large number of patients under the medical treatment still not reaching the desired outcomes. To present a Metabolic Risk Score to better guide the surgical indication for T2DM patients with body mass index (BMI) where surgery for obesity is still controversial. Research was conducted in Pubmed, Medline, Pubmed Central, Scielo and Lilacs between 2003-2015 correlating headings: metabolic surgery, obesity and type 2 diabetes mellitus. In addition, representatives of the societies involved, as an expert panel, issued opinions. Forty-five related articles were analyzed by evidence-based medicine criteria. Grouped opinions sought to answer the following questions: Why metabolic and not bariatric surgery?; Mechanisms involved in glycemic control; BMI as a single criterion for surgical indication for uncontrolled T2DM; Results of metabolic surgery studies in BMI<35 kg/m2; Safety of metabolic surgery in patients with BMI<35 kg/m2; Long-term effects of surgery in patients with baseline BMI<35 kg/m2 and Proposal for a Metabolic Risk Score. Metabolic surgery has well-defined mechanisms of action both in experimental and human studies. Gastrointestinal interventions in T2DM patients with IMC≤35 kg/m2 has similar safety and efficacy when compared to groups with greater BMIs, leading to the improvement of diabetes in a superior manner than clinical treatment and lifestyle changes, in part through weight loss independent mechanisms . There is no correlation between baseline BMI and weight loss in the long term with the success rate after any surgical treatment. Gastrointestinal surgery treatment may be an option for patients with T2DM without adequate clinical control, with a BMI between 30 and 35, after thorough evaluation following the parameters detailed in Metabolic Risk Score defined by the surgical societies. Roux-en-Y gastric bypass (RYGB), because of its well known safety and efficacy and longer follow-up studies, is the main surgical technique indicated for patients eligible for surgery through the Metabolic Risk Score. The vertical sleeve gastrectomy may be considered if there is an absolute contraindication for the RYGB. T2DM patients should be evaluated by the multiprofessional team that will assess surgical eligibility, preoperative work up, follow up and long term monitoring for micro and macrovascular complications. Mesmo considerando o avanço do tratamento clínico ocorrido nos últimos 20 anos, com novos e mais eficientes medicamentos, os dados ainda são desanimadores quanto ao controle da obesidade e da diabete melito tipo 2 (DMT2),com grande parcela de doentes em tratamento clínico ficando fora da meta desejada de controle. Apresentar proposta de Escore de Risco Metabólico para melhor orientar a indicação cirúrgica do diabete em pacientes com índice de massa corpórea (IMC) mais baixo nos quais o uso de procedimento cirúrgico para obesidade ainda é controverso. Foi realizada pesquisa nas bases de dados Pubmed, Medline, Pubmed Central, Scielo e Lilacs entre 2003-2015 correlacionando os descritores:cirurgia metabólica, obesidade e diabete melito tipo 2. Adicionalmente, representantes das sociedades envolvidas emitiram opiniões em pontos nos quais não existia na literatura trabalhos com graus de evidência elevados. Foram encontrados 45 artigos relacionados que foram analisados pelos critérios da medicina baseada em evidências. As opiniões agrupadas procuraram responder as seguintes questões: Porque cirurgia metabólica e não bariátrica?; Mecanismos envolvidos no controle glicêmico; IMC como critério isolado de indicação cirúrgica para o DMT2 não controlado; Resultados de estudos de cirurgia metabólica em IMC<35 kg/m2; Segurança da cirurgia metabólica em pacientes com IMC<35 kg/m2; Efeitos em longo prazo da cirurgia em pacientes com IMC inicial <35 kg/m2; Proposta de Escore de Risco Metabólico. A cirurgia metabólica tem mecanismos de ação bem definidos tanto em estudos experimentais quanto em seres humanos. As intervenções gastrointestinais em diabéticos com IMC≤35 kg/m2 possuem segurança e eficácia semelhantes aos grupos com IMCs maiores, levando a melhora do diabete de forma superior aos tratamentos clínicos e mudanças de estilo de vida, em parte através de mecanismos independentes da perda ponderal. Não há correlação entre o IMC inicial e perda ponderal em longo prazo com os índices de sucesso do tratamento cirúrgico. O tratamento cirúrgico é opção para os pacientes portadores de DMT2 sem adequado controle clínico, com IMC entre 30 e 35, após minuciosa avaliação seguindo os parâmetros dispostos no Escore de Risco Metabólico aqui proposto. DGYR é a técnica indicada para os pacientes selecionados no Escore, existindo a possibilidade de indicação da gastrectomia vertical para os casos em que exista contraindicação para ela. O paciente deve ser avaliado por equipe multiprofissional envolvida na indicação, preparo e acompanhamento após as operações e acompanhados com monitorização de complicações micro e macrovasculares.

Procedures Handbook for Elementary School IMC Clerks. Revised.

ERIC Educational Resources Information Center

Allen, Christine

This training manual describes and explains the variety of tasks performed by library clerks in the Riverside (California) Unified School District's elementary school instructional media centers (IMCs). It is noted that the job responsibilities of these clerks fall into four areas with specific duties relating to each: maintenance of the…

Pyramids' Reading Program Project Directors' Report, 1971-72.

ERIC Educational Resources Information Center

Brown, Alberta; And Others

The Pyramids' Reading Program, with the Instructional Materials Center (IMC) and the Combine Component, operates in Minneapolis public and parochial Target Area elementary schools to help improve the reading skills of educationally disadvantaged children. The IMC writes, produces, and distributes the reading material used in the program, and the…

Formative Assessment in the High School IMC

ERIC Educational Resources Information Center

Edwards, Valerie A.

2007-01-01

In this article, the author discusses how she uses formative assessments of information literacy skills in the high school IMC. As a result of informal observation and conversations with individual students--a form of formative assessment itself--the author learned that students were not using indexes to locate relevant information in nonfiction…

Astronomy through the microscope: A workshop during the opening night of the 2016 IMC

NASA Astrophysics Data System (ADS)

Netjes, G. J.; de Vet, S.

2016-01-01

During the IMC workshop meteoritical thins sections were shown live with a microscope connected to the beamer. This article will provide a background to thin sections, what we can learn from them and the tour through the solar system we can take with them.

In-situ synchrotron micro-diffraction study of surface, interface, grain structure, and strain/stress evolution during Sn whisker/hillock formation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pei, Fei; Jadhav, Nitin; Buchovecky, Eric

2016-03-14

We have performed X-ray synchrotron micro-diffraction measurements to study the processes controlling the formation of hillocks and whiskers in Sn layers on Cu. The studies were done in real-time on Sn layers that were electro-deposited immediately before the X-ray measurements were started. This enabled a region of the sample to be monitored from the as-deposited state until after a hillock feature formed. In addition to measuring the grain orientation and deviatoric strain (via Laue diffraction), the X-ray fluorescence was monitored to quantify the evolution of the Sn surface morphology and the formation of intermetallic compound (IMC) at the Sn-Cu interface.more » The results capture the simultaneous growth of the feature and the corresponding film stress, grain orientation, and IMC formation. The observations are compared with proposed mechanisms for whisker/hillock growth and nucleation.« less

Thermal Stability of Otto Fuel Prepolymer

NASA Technical Reports Server (NTRS)

Tompa, Albert S.; Sandagger, Karrie H.; Bryant, William F., Jr.; McConnell, William T.; Lacot, Fernando; Carr, Walter A.

2000-01-01

Otto Fuel II contains a nitrate ester, plasticizer, and 2-NDPA as a stabilizer. Otto Fuel with stabilizers from three vendors was investigated by dynamic and isothermal DSC using samples sealed in a glass ampoule and by Isothermal Microcalorimetry (IMC) using 10 gram samples aged at 75 C for 35 days. DSC kinetics did not show differences between the stabilizer; the samples had an activation energy of 36.7 +/- 0.6 kcal/mol. However, IMC analysis was sensitive enough to detect small differences between the stabilizer, namely energy of interaction values of 7 to 14 Joules. DSC controlled cooling and heating at 5 C/min from 30 to -60 to 40 C experiments were similar and showed a crystallization peak at -48 +/- 1 C during cooling, and upon heating there was a glass transition temperature step at approx. -54 +/- 0.5 C and a melting peak at -28 +/- 0.4 C.

Thermal Stability of Otto Fuel Prepolymer

NASA Technical Reports Server (NTRS)

Tompa, Albert S.; Sandagger, Karrie H.; Bryant, William F., Jr.; McConnell, William T.; Lacot, Fernando; Carr, Walter A.

2000-01-01

Otto Fuel II contains a nitrate ester, plasticizer, and 2-NPDA as a stabilizer. Otto Fuel with stabilizers from three vendors was investigated by dynamic and isothermal differential scanning calorimetry (DSC) using samples sealed in a glass ampoule and by Isothermal Microcalorimetry (IMC) using 10 gram samples aged at 75 C for 35 days. DSC kinetics did not show differences between the stabilizer; the samples had an activation energy of 36.7 +/- 0.6 kcal/mol. However, IMC analysis was sensitive enough to detect small differences between the stabilizer, namely energy of interaction values of 7 to 14 Joules. DSC controlled cooling and heating at 5 C/min from 30 to -60 to 40 C experiments were similar and showed a crystallization peak at -48 +/- 1 C during cooling, and upon heating there was a glass transition temperature step at approx. -54 +/- 0.5 C and a melting peak at -28 +/- 0.4 C.

Constraints on the large-x d/u ratio from electron--nucleus scattering at x>1

DOE Office of Scientific and Technical Information (OSTI.GOV)

O. Hen, A. Accardi, W. Melnitchouk and E. Piasetzky

2011-12-01

Recently the ratio of neutron to proton structure functions F{sub 2}{sup n}/F{sub 2}{sup p} was extracted from a phenomenological correlation between the strength of the nuclear EMC effect and inclusive electron-nucleus cross section ratios at x > 1. Within conventional models of nuclear smearing, this 'in-medium correction' (IMC) extraction constrains the size of nuclear effects in the deuteron structure functions, from which the neutron structure function F{sub 2}{sup n} is usually extracted. The IMC data determine the resulting proton d/u quark distribution ratio, extrapolated to x = 1, to be 0.23 {+-} 0.09 with a 90% confidence level. This ismore » well below the SU(6) symmetry limit of 1/2 and significantly above the scalar diquark dominance limit of 0.« less

THE ROLE OF METABOLIC SURGERY FOR PATIENTS WITH OBESITY GRADE I ANDCLINICALLY UNCONTROLLED TYPE 2 DIABETES.

PubMed

Campos, Josemberg; Ramos, Almino; Szego, Thomaz; Zilberstein, Bruno; Feitosa, Heládio; Cohen, Ricardo

2016-07-07

Even considering the advance of the medical treatment in the last 20 years with new and more effective drugs, the outcomes are still disappointing as the control of obesity and type 2 Diabetes Mellitus (T2DM) with a large number of patients under the medical treatment still not reaching the desired outcomes. To present a Metabolic Risk Score to better guide the surgical indication for T2DM patients with body mass index (BMI) where surgery for obesity is still controversial. Research was conducted in PubMed, Medline, PubMed Central, Scielo and Lilacs between 2003-2015 correlating headings: metabolic surgery, obesity and type 2 diabetesmellitus. In addition, representatives of the societiesinvolved, as an expert panel, issued opinions. Forty-five related articles were analyzed by evidence-based medicine criteria. Grouped opinions sought to answer the following questions: Why metabolic and not bariatric surgery?; Mechanisms involved in glycemic control; BMI as a single criterion for surgical indication for uncontrolled T2DM; Results of metabolic surgery studies in BMI<35 kg/m2; Safety of metabolic surgery in patients with BMI<35 kg/m2; Long-term effects of surgery in patients with baseline BMI<35 kg/m2 and Proposal for a Metabolic Risk Score. Metabolic surgery has well-defined mechanisms of action both in experimental and human studies. Gastrointestinal interventions in T2DM patients with IMC≤35 kg/m2 has similar safety and efficacy when compared to groups with greater BMIs, leading to the improvement of diabetes in a superior manner than clinical treatment and lifestyle changes, in part through weight loss independent mechanisms . There is no correlation between baseline BMI and weight loss in the long term with the success rate after any surgical treatment. Gastrointestinal surgery treatment may be an option for patients with T2DM without adequate clinical control, with a BMI between 30 and 35, after thorough evaluation following the parameters detailed in Metabolic Risk Score defined by the surgical societies. Roux-en-Y gastric bypass (RYGB), because of its well known safety and efficacy and longer follow-up studies, is the main surgical technique indicated for patients eligible for surgery through the Metabolic Risk Score. The vertical sleeve gastrectomy may be considered if there is an absolute contraindication for the RYGB. T2DM patients should be evaluated by the multiprofessional team that will assess surgical eligibility, preoperative work up, follow up and long term monitoring for micro and macrovascular complications. Mesmo considerando o avanço do tratamento clínico ocorrido nos últimos 20 anos, com novos e mais eficientes medicamentos, os dados ainda são desanimadores quanto ao controle da obesidade e da diabete melito tipo 2(DMT2),com grande parcela de doentes em tratamento clínico ficando fora da meta desejada de controle. Apresentar proposta de Escore de Risco Metabólico para melhor orientar a indicação cirúrgica do diabete em pacientes com índice de massa corpórea (IMC) mais baixo nos quais o uso de procedimento cirúrgico para obesidade ainda é controverso. Foi realizada pesquisa nas bases de dados PubMed, Medline, PubMed Central, Scielo e Lilacs entre 2003-2015 correlacionando os descritores:cirurgia metabólica, obesidade e diabete melito tipo 2. Adicionalmente, representantes das sociedades envolvidas emitiram opiniões em pontos nos quais não existia na literatura trabalhos com graus de evidência elevados. Foram encontrados 45 artigos relacionadosque foram analisados pelos critérios da medicina baseada em evidências.As opiniões agrupadas procuraram responder as seguintes questões: Porque cirurgia metabólica e não bariátrica?;Mecanismos envolvidos no controle glicêmico; IMC como critério isolado de indicação cirúrgica para o DMT2 não controlado; Resultados de estudos de cirurgia metabólica em IMC<35 kg/m2; Segurança da cirurgia metabólica em pacientes com IMC<35 kg/m2; Efeitos em longo prazo da cirurgia em pacientes com IMC inicial <35 kg/m2; Proposta de Escore de Risco Metabólico. A cirurgia metabólica tem mecanismos de ação bem definidos tanto em estudos experimentais quanto em seres humanos. As intervenções gastrointestinais em diabéticos com IMC≤35 kg/m2 possuem segurança e eficácia semelhantes aos grupos com IMCs maiores, levando a melhora do diabete de forma superior aos tratamentos clínicos e mudanças de estilo de vida, em parte através de mecanismos independentes da perda ponderal. Não há correlação entre o IMC inicial e perda ponderal em longo prazo com os índices de sucesso do tratamento cirúrgico. O tratamento cirúrgico é opção para os pacientes portadores de DMT2 sem adequado controle clínico, com IMC entre 30 e 35, após minuciosa avaliação seguindo os parâmetros dispostos no Escore de Risco Metabólico aqui proposto. DGYR é a técnica indicada para os pacientes selecionados no Escore, existindo a possibilidade de indicação da gastrectomia vertical para os casos em que exista contraindicação para ela. O paciente deve ser avaliado por equipe multiprofissional envolvida na indicação, preparo e acompanhamento após as operações e acompanhados com monitorização de complicações micro e macrovasculares.

Investigation of advanced navigation and guidance system concepts for all-weather rotorcraft operations

NASA Technical Reports Server (NTRS)

Upton, H. W.; Boen, G. E.; Moore, J.

1982-01-01

Results are presented of a survey conducted of active helicopter operators to determine the extent to which they wish to operate in IMC conditions, the visibility limits under which they would operate, the revenue benefits to be gained, and the percent of aircraft cost they would pay for such increased capability. Candidate systems were examined for capability to meet the requirements of a mission model constructed to represent the modes of flight normally encountered in low visibility conditions. Recommendations are made for development of high resolution radar, simulation of the control display system for steep approaches, and for development of an obstacle sensing system for detecting wires. A cost feasibility analysis is included.

The Impact of IMC on Advertising and Public Relations Education.

ERIC Educational Resources Information Center

Griffin, W. Glenn; Pasadeos, Yorgo

1998-01-01

Surveys advertising and public relations faculty members with regard to IMC (Integrated Marketing Communications) and its impact on current curricula. Finds (1) areas of discontent with current course curricula; (2) evidence of "separate agendas" between advertising and public relations educators on this issue; and (3) evidence of a generation gap…

Embracing the Internet. DETC Occasional Paper Number 14.

ERIC Educational Resources Information Center

Oliver, Carol; Wills, Gordon

Since November 1995, all programs/processes of the business school of the International Management Centres (IMC) of Buckingham, England, have been conducted through the Internet. As in other distance education programs, students join the IMC program from any country in the world. Programs are always delivered to "sets" of 8-16 people who…

Innovative Moments in Grief Therapy: Reconstructing Meaning Following Perinatal Death

ERIC Educational Resources Information Center

Alves, Daniela; Mendes, Ines; Goncalves, Miguel M.; Neimeyer, Robert A.

2012-01-01

This article presents an intensive analysis of a good outcome case of constructivist grief therapy with a bereaved mother, using the Innovative Moments Coding System (IMCS). Inspired by M. White and D. Epston's narrative therapy, the IMCS conceptualizes therapeutic change as resulting from the elaboration and expansion of unique outcomes (or as we…

Instructional Materials Center, Project Director's Report: 1969-70.

ERIC Educational Resources Information Center

Trockman, Mitchell D.

The Instructional Materials Center (IMC) originated in association with the development of a course to train teachers in specific techniques for teaching reading and the use of a wide range of multisensory reading materials. The major objective of the IMC project was to supply teachers with a wide variety of useful instructional materials for…

Creating an Information Literate School: Information Literacy in Action.

ERIC Educational Resources Information Center

Batz, Linda; Rosenberg, Harlene

1999-01-01

Describes an award-winning instructional media center (IMC) at a New Jersey high school. The IMC (library) is the school's hub from 7:15 a.m. to 6 p.m., and has dial-in access. This information-literacy program emphasizes total-quality-management principles, ongoing professional development, teacher support, and information skills instruction.…

Learning Through Media; An IMC Handbook for Chelmsford Teachers.

ERIC Educational Resources Information Center

Morrow, James; Wallace, Daniel

This handbook is designed to provide basic information that is necessary to use the Chelmsford School System's Instructional Media Center (IMC). It defines six different media (print, sound, television, photography, movies and design) and suggests a series of separate classroom production activities in each. An emphasis is given to the ways in…

Social Impact "Buycotts": A Tool for Innovation, Impact, and Engagement to Teach Integrated Marketing Communications

ERIC Educational Resources Information Center

Holland, Jonna

2016-01-01

A novel concept for an integrated marketing communications (IMC) semester project succeeded in meeting or exceeding course learning objectives while increasing social impact and community engagement. Partnering with a selected business and a synergistic community cause, student teams developed and implemented an IMC plan to motivate consumers to…

Libraries and Instructional Materials Centers. Educational Facilities Review Series Number 13.

ERIC Educational Resources Information Center

Baas, Alan M.

The concept of the instructional materials center (IMC) has evolved in response to the limitations of the traditional single-resource library. The IMC is an organizational solution for integrating traditional library services with the variety of multimedia devices and materials necessary to contemporary educational practice. The concept grew from…

In situ visualization of metallurgical reactions in nanoscale Cu/Sn diffusion couples

DOE Office of Scientific and Technical Information (OSTI.GOV)

Yin, Qiyue; Stach, Eric A.; Gao, Fan

2015-02-10

The Cu–Sn metallurgical soldering reaction in two-segmented Cu–Sn nanowires is visualized by in-situ transmission electron microscopy. By varying the relative lengths of Cu and Sn segments, we show that the metallurgical reaction starts at ~ 200 ° with the formation of a Cu–Sn solid solution for the Sn/Cu length ratio smaller than 1:5 while the formation of Cu–Sn intermetallic compounds (IMCs) for larger Sn/Cu length ratios. Upon heating the nanowires up to ~ 500 °C, two phase transformation pathways occur, η-Cu₆Sn₅ → ε-Cu₃Sn → δ-Cu₄₁Sn₁₁ for nanowires with a long Cu segment and η-Cu₆Sn₅ → ε-Cu₃Sn → γ-Cu₃Sn with amore » short Cu segment. The dynamic in situ TEM visualization of the evolution of Kirkendall voids demonstrates that Cu diffuses faster both in Sn and IMCs than that of Sn in Cu₃ and IMCs, which is the underlying cause of the dependence of the IMC formation and associated phase evolution on the relative lengths of the Cu and Sn segments.« less

Three Dimensional Characterization of Tin Crystallography and Cu6Sn5 Intermetallics in Solder Joints by Multiscale Tomography

NASA Astrophysics Data System (ADS)

Kirubanandham, A.; Lujan-Regalado, I.; Vallabhaneni, R.; Chawla, N.

2016-11-01

Decreasing pitch size in electronic packaging has resulted in a drastic decrease in solder volumes. The Sn grain crystallography and fraction of intermetallic compounds (IMCs) in small-scale solder joints evolve much differently at the smaller length scales. A cross-sectional study limits the morphological analysis of microstructural features to two dimensions. This study utilizes serial sectioning technique in conjunction with electron backscatter diffraction to investigate the crystallographic orientation of both Sn grains and Cu6Sn5 IMCs in Cu/Pure Sn/Cu solder joints in three dimensional (3D). Quantification of grain aspect ratio is affected by local cooling rate differences within the solder volume. Backscatter electron imaging and focused ion beam serial sectioning enabled the visualization of morphology of both nanosized Cu6Sn5 IMCs and the hollow hexagonal morphology type Cu6Sn5 IMCs in 3D. Quantification and visualization of microstructural features in 3D thus enable us to better understand the microstructure and deformation mechanics within these small scale solder joints.

Application of laser in seam welding of dissimilar steel to aluminium joints for thick structural components

NASA Astrophysics Data System (ADS)

Meco, S.; Pardal, G.; Ganguly, S.; Williams, S.; McPherson, N.

2015-04-01

Laser welding-brazing technique, using a continuous wave (CW) fibre laser with 8000 W of maximum power, was applied in conduction mode to join 2 mm thick steel (XF350) to 6 mm thick aluminium (AA5083-H22), in a lap joint configuration with steel on the top. The steel surface was irradiated by the laser and the heat was conducted through the steel plate to the steel-aluminium interface, where the aluminium melts and wets the steel surface. The welded samples were defect free and the weld micrographs revealed presence of a brittle intermetallic compounds (IMC) layer resulting from reaction of Fe and Al atoms. Energy Dispersive Spectroscopy (EDS) analysis indicated the stoichiometry of the IMC as Fe2Al5 and FeAl3, the former with maximum microhardness measured of 1145 HV 0.025/10. The IMC layer thickness varied between 4 to 21 μm depending upon the laser processing parameters. The IMC layer showed an exponential growth pattern with the applied specific point energy (Esp) at a constant power density (PD). Higher PD values accelerate the IMC layer growth. The mechanical shear strength showed a narrow band of variation in all the samples (with the maximum value registered at 31.3 kN), with a marginal increase in the applied Esp. This could be explained by the fact that increasing the Esp results into an increase in the wetting and thereby the bonded area in the steel-aluminium interface.

Molecular population dynamics of DNA structures in a bcl-2 promoter sequence is regulated by small molecules and the transcription factor hnRNP LL.

PubMed

Cui, Yunxi; Koirala, Deepak; Kang, HyunJin; Dhakal, Soma; Yangyuoru, Philip; Hurley, Laurence H; Mao, Hanbin

2014-05-01

Minute difference in free energy change of unfolding among structures in an oligonucleotide sequence can lead to a complex population equilibrium, which is rather challenging for ensemble techniques to decipher. Herein, we introduce a new method, molecular population dynamics (MPD), to describe the intricate equilibrium among non-B deoxyribonucleic acid (DNA) structures. Using mechanical unfolding in laser tweezers, we identified six DNA species in a cytosine (C)-rich bcl-2 promoter sequence. Population patterns of these species with and without a small molecule (IMC-76 or IMC-48) or the transcription factor hnRNP LL are compared to reveal the MPD of different species. With a pattern recognition algorithm, we found that IMC-48 and hnRNP LL share 80% similarity in stabilizing i-motifs with 60 s incubation. In contrast, IMC-76 demonstrates an opposite behavior, preferring flexible DNA hairpins. With 120-180 s incubation, IMC-48 and hnRNP LL destabilize i-motifs, which has been previously proposed to activate bcl-2 transcriptions. These results provide strong support, from the population equilibrium perspective, that small molecules and hnRNP LL can modulate bcl-2 transcription through interaction with i-motifs. The excellent agreement with biochemical results firmly validates the MPD analyses, which, we expect, can be widely applicable to investigate complex equilibrium of biomacromolecules. © 2014 The Author(s). Published by Oxford University Press [on behalf of Nucleic Acids Research].

Effect of buckwheat flour and oat bran on growth and cell viability of the probiotic strains Lactobacillus rhamnosus IMC 501®, Lactobacillus paracasei IMC 502® and their combination SYNBIO®, in synbiotic fermented milk.

PubMed

Coman, Maria Magdalena; Verdenelli, Maria Cristina; Cecchini, Cinzia; Silvi, Stefania; Vasile, Aida; Bahrim, Gabriela Elena; Orpianesi, Carla; Cresci, Alberto

2013-10-15

Fermented foods have a great significance since they provide and preserve large quantities of nutritious foods in a wide diversity of flavors, aromas and texture, which enrich the human diet. Originally fermented milks were developed as a means of preserving nutrients and are the most representatives of the category. The first aim of this study was to screen the effect of buckwheat flour and oat bran as prebiotics on the production of probiotic fiber-enriched fermented milks, by investigating the kinetics of acidification of buckwheat flour- and oat bran-supplemented milk fermented by Lactobacillus rhamnosus IMC 501®, Lactobacillus paracasei IMC 502® and their 1:1 combination named SYNBIO®. The probiotic strains viability, pH and sensory characteristics of the fermented fiber-enriched milk products, stored at 4 °C for 28 days were also monitored. The results showed that supplementation of whole milk with the tested probiotic strains and the two vegetable substrates results in a significant faster lowering of the pH. Also, the stability of L. rhamnosus IMC 501®, L. paracasei IMC 502® and SYNBIO® during storage at 4 °C for 28 days in buckwheat flour- and oat bran-supplemented samples was remarkably enhanced. The second aim of the study was to develop a new synbiotic product using the best combination of probiotics and prebiotics by promoting better growth and survival and be acceptable to the consumers with high concentration of probiotic strain. This new product was used to conduct a human feeding trial to validate the fermented milk as a carrier for transporting bacterial cells into the human gastrointestinal tract. The probiotic strains were recovered from fecal samples in 40 out of 40 volunteers fed for 4 weeks one portion per day of synbiotic fermented milk carrying about 10(9) viable cells. © 2013.

An improved random walk algorithm for the implicit Monte Carlo method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Keady, Kendra P., E-mail: keadyk@lanl.gov; Cleveland, Mathew A.

In this work, we introduce a modified Implicit Monte Carlo (IMC) Random Walk (RW) algorithm, which increases simulation efficiency for multigroup radiative transfer problems with strongly frequency-dependent opacities. To date, the RW method has only been implemented in “fully-gray” form; that is, the multigroup IMC opacities are group-collapsed over the full frequency domain of the problem to obtain a gray diffusion problem for RW. This formulation works well for problems with large spatial cells and/or opacities that are weakly dependent on frequency; however, the efficiency of the RW method degrades when the spatial cells are thin or the opacities aremore » a strong function of frequency. To address this inefficiency, we introduce a RW frequency group cutoff in each spatial cell, which divides the frequency domain into optically thick and optically thin components. In the modified algorithm, opacities for the RW diffusion problem are obtained by group-collapsing IMC opacities below the frequency group cutoff. Particles with frequencies above the cutoff are transported via standard IMC, while particles below the cutoff are eligible for RW. This greatly increases the total number of RW steps taken per IMC time-step, which in turn improves the efficiency of the simulation. We refer to this new method as Partially-Gray Random Walk (PGRW). We present numerical results for several multigroup radiative transfer problems, which show that the PGRW method is significantly more efficient than standard RW for several problems of interest. In general, PGRW decreases runtimes by a factor of ∼2–4 compared to standard RW, and a factor of ∼3–6 compared to standard IMC. While PGRW is slower than frequency-dependent Discrete Diffusion Monte Carlo (DDMC), it is also easier to adapt to unstructured meshes and can be used in spatial cells where DDMC is not applicable. This suggests that it may be optimal to employ both DDMC and PGRW in a single simulation.« less

Interfacial reaction and microstructure between the Sn3Ag0.5Cu solder and Cu-Co dual-phase substrate

NASA Astrophysics Data System (ADS)

Li, Chao; Hu, Xiaowu; Jiang, Xiongxin; Li, Yulong

2018-07-01

In this study, interfacial reactions and microstructures of the Sn3Ag0.5Cu (SAC305)/Cu- xCo ( x = 0, 30 and 50 wt%) systems were investigated during reflowing at 290 °C and solid-state aging at 150 °C for various time. The effects of different contents of Co in substrate on interfacial reaction in SAC305/Cu- xCo system were discussed. It was found that the addition of Co into pure copper substrate to achieve alloying would effectively inhibit the growth of IMC layers. Comparison among the thickness of the intermetallic compound (IMC) in three kinds of SAC305/Cu-Co systems indicated that the IMC layer of SAC305/Cu joint was thicker than that of the other two types of solder joints. The composition of the SAC305/Cu IMC layers was Cu6Sn5 and Cu3Sn. Three kinds of reaction phases (Cu,Co)6Sn5, (Cu,Co)Sn2 and (Cu,Co)3Sn were found at the interfaces of the SAC305/Cu-30Co and SAC305/Cu-50Co joints. Remarkably the (Cu,Co)Sn2 phase was found adjacent to the Co-rich phase after soldering and eliminated after the aging treatment. While the (Cu,Co)3Sn phase accumulated increasingly adjacent to the substrate with the increased aging time. The results suggested that the Co content increased from 30 to 50 wt% in substrate lead to significant restraint of the growth of interfacial IMC. In addition, the thickness of the interfacial IMC layer was linear with the square root of the aging time during the aging process. The reaction rate between Sn atoms in solder and Cu, Co atoms in substrate was quite different, which lead to the fact that the interface of SAC305/Cu-Co is uneven on the side of substrate after reflowing and aging.

An Examination of Integrated Marketing Communication in US Public Institutions of Higher Education

ERIC Educational Resources Information Center

Edmiston, Dawn

2008-01-01

This research analyzes the strategic process of integrated marketing communication (IMC) and its current application in US public institutions of higher education (IHEs). The basis for this research was a survey questionnaire that analyzed the impact of IMC on 42 leading US public colleges and universities (as ranked by "U.S. News & World…

Inter-Ministerial Cooperation and Institutional Development in Education: Breaking New Grounds or Treading Old Paths?

ERIC Educational Resources Information Center

Hoppers, Wim

2009-01-01

This article examines "inter-ministerial cooperation" (IMC) in the education sector as a form of development cooperation, whereby a ministry of education in the north collaborates with counterpart(s) in the south for purposes of mutual interest and development. It explores the characteristics and dynamics of IMC, and addresses the…

Characterization and modeling of microstructural evolution of near-eutectic tin-silver-copper solder joints

NASA Astrophysics Data System (ADS)

Zbrzezny, Adam R.

Near-eutectic Sn-Ag-Cu (SAC) solders are currently considered as major lead-free replacement candidates for Sn-Pb eutectic alloys in microelectronics applications. In this thesis, the microstructural thermal stability including recrystallization, grain growth behavior, Pb and Au contamination effects and interaction of the SAC solder with Cu and Ni substrates were investigated. The true eutectic composition of the Sn-Ag-Cu alloy was verified to be Sn3.5Ag0.9Cu wt.%, and the eutectic melting temperature was determined to be 217.4 +/- 0.8°C. The system was classified as belonging to faceting (Cu6Sn5)-faceting (Ag3Sn)-nonfaceting (Sn matrix) ternary eutectic. The most significant consequence of Pb contamination was the formation of a quaternary eutectic phase (Sn-Ag-Cu-Pb) with a melting point at 176°C. Similarly, the presence of gold in the SAC alloy led to a development of a new quaternary phase (Sn-Ag-Cu-Au) melting at 204°C. Prolonged aging of SAC-4 wt.% Au on nickel resulted in the deposition of a new, previously unreported, intermetallic (IMC) layer, ((Au1-xCUx)6Sn 5, 15 wt.% of Au) on top of the existing (Cu1-yNi y)6Sn5 layer. The interfacial products that formed during soldering to copper were Cu6Sn5 and Cu3Sn. Soldering to nickel resulted in the formation of one layer, (Cu1-yNiy) 6Sn5, which was different from the expected Ni3Sn 4 layer. A small copper content in the SAC solder (0.7 wt.%) was sufficient to promote this thermodynamic shift. Intermetallic growth on Cu during solid state aging was established to be bulk diffusion controlled. The IMC layers in the SAC system grew at a slower rate than in the Sn-Pb system. It was found that the reliability of SAC solder joints on copper was considerably better than on nickel due to copper enrichment during reflow and subsequent Cu6Sn5 intermetallic precipitation. Enhanced copper and silver diffusion followed by tin recrystallization and grain growth, cavity nucleation and subsequent micro-crack linkage formed the framework of a proposed microstructural model of solder degradation mechanisms under cyclic creep conditions. A multilayer diffusion model of the SAC/Cu couple was proposed and employed for predicting intermetallic layer growth kinetics. In general, the calculated IMC thicknesses for short and intermediate aging times were in reasonable agreement with the experimental data.

Chemoinformetrical evaluation of dissolution property of indomethacin tablets by near-infrared spectroscopy.

PubMed

Otsuka, Makoto; Tanabe, Hideaki; Osaki, Kazuo; Otsuka, Kuniko; Ozaki, Yukihiro

2007-04-01

The purpose of this study was to use near-infrared spectrometry (NIR) with chemoinformetrics to predict the change of dissolution properties in indomethacin (IMC) tablets during the manufacturing process. A comparative evaluation of the dissolution properties of the tablets was performed by the diffused reflectance (DRNIR) and transmittance (TNIR) NIR spectroscopic methods. Various kinds of IMC tablets (200 mg) were obtained from a powder (20 mg of IMC, 18 mg of microcrystalline cellulose, 160 mg of lactose, and 2 mg of magnesium stearate) under various compression pressures (60-398 MPa). Dissolution tests were performed in phosphate buffer, and the time required for 75% dissolution (T75) and mean dissolution time (MDT) were calculated. DRNIR and TNIR spectra were recorded, and the both NIR spectra used to establish a calibration model for predicting the dissolution properties by principal component regression analysis (PCR). The T75 and MDT increased as the compression pressure increased, since tablet porosity decreased with increasing pressure. Intensity of the DRNIR spectra of the compressed tablets decreased as the compression pressure increased. However, the intensity of TNIR spectra increased along with the pressure. The calibration models used to evaluate the dissolution properties of tablets were established by using PCR based on both DRNIR and TNIR spectra of the tablets. The multiple correlation coefficients of the relationship between the actual and predictive T75 by the DRNIR and TNIR methods were 0.831 and 0.962, respectively. It is possible to predict the dissolution properties of pharmaceutical preparations using both DRNIR and TNIR chemoinformetric methods. The TNIR method was more accurate for predictions of the dissolution behavior of tablets than the DRNIR method. (c) 2007 Wiley-Liss, Inc.

Fatigue failure kinetics and structural changes in lead-free interconnects due to mechanical and thermal cycling

NASA Astrophysics Data System (ADS)

Fiedler, Brent Alan

Environmental and human health concerns drove European parliament to mandate the Reduction of Hazardous Substances (RoHS) for electronics. This was enacted in July 2006 and has practically eliminated lead in solder interconnects. There is concern in the electronics packaging community because modern lead-free solder is rich in tin. Presently, near-eutectic tin-silver-copper solders are favored by industry. These solders are stiffer than the lead-tin near-eutectic alloys, have a higher melting temperature, fewer slip systems, and form intermetallic compounds (IMC) with Cu, Ni and Ag, each of which tend to have a negative effect on lifetime. In order to design more reliable interconnects, the experimental observation of cracking mechanisms is necessary for the correct application of existing theories. The goal of this research is to observe the failure modes resulting from mode II strain and to determine the damage mechanisms which describe fatigue failures in 95.5 Sn- 4.0 Ag - 0.5 Cu wt% (SAC405) lead-free solder interconnects. In this work the initiation sites and crack paths were characterized for SAC405 ball-grid array (BGA) interconnects with electroless-nickel immersion-gold (ENIG) pad-finish. The interconnects were arranged in a perimeter array and tested in fully assembled packages. Evaluation methods included monotonic and displacement controlled mechanical shear fatigue tests, and temperature cycling. The specimens were characterized using metallogaphy, including optical and electron microscopy as well as energy dispersive spectroscopy (EDS) and precise real-time electrical resistance structural health monitoring (SHM). In mechanical shear fatigue tests, strain was applied by the substrates, simulating dissimilar coefficients of thermal expansion (CTE) between the board and chip-carrier. This type of strain caused cracks to initiate in the soft Sn-rich solder and grow near the interface between the solder and intermetallic compounds (IMC). The growth near the interface was found to be caused by dislocation pile-ups at the IMC when the plastic zone ahead of the crack tip reached this interface. In temperature cycling testing, strains arose within the interconnect due to CTE mismatch between the solder and IMC. The substrates had matched CTE for all specimens in this research. Because of this, all the temperature cycling cracks were observed at interfaces, generally between the solder and IMC. Additionally, real-time electrical resistance may be a useful non-destructive evaluation (NDE) tool for the empirical observation of fatigue cracking in ball-grid arrays (BGA) during both mechanical and temperature cycling tests.

SYSTEM DESIGN FOR A CONTINUOUS PROGRESS SCHOOL--PART III, THE INSTRUCTIONAL MATERIALS CENTER.

ERIC Educational Resources Information Center

COGSWELL, JOHN F.; EGBERT, ROBERT L.

THE INSTRUCTIONAL MATERIALS CENTER (IMC) OF THE CONTINUOUS PROGRESS SCHOOL WAS DESCRIBED. THE CONTINUOUS PROGRESS SCHOOL PLAN WAS DEVISED BY DR. EDWIN READ AND WAS BEING DEVELOPED AT THE LABORATORY SCHOOL OF BRIGHAM YOUNG UNIVERSITY. THIS REPORT DESCRIBED HOW AN IMC MIGHT OPERATE RATHER THAN HOW ONE IS OPERATING OR IS PLANNED TO OPERATE. AS…

Teacher Use of Instructional Materials and Other Matters Related to Special Education IMC/LRC Collections. Theoretical Paper No. 59.

ERIC Educational Resources Information Center

Latham, Glenn

Presented is the report of a study -- involving 1150 special education teachers and 25 instructional materials centers (IMCs) and learning resource centers (LRCs) -- to investigate the needs for, uses of, and priorities for instructional materials for teaching handicapped children. Listed are three methods of data collection: the use of materials…

Integrated Marketing Communications (IMC) Variables That Influence Perceived Return on Investment (ROI) in Higher Education: Chief Marketing Officers' Perceptions

ERIC Educational Resources Information Center

King, Adrienne L.

2013-01-01

This study examines the relationship of the level of Integrated Marketing Communications (IMC) implementation, level of open systems and change in state appropriations on perceived return on investment (ROI) in U.S. public higher education institutions (HEIs). Designed to provide HEI leaders with data to more accurately determine the best IMC…

Electrical characteristics for Sn-Ag-Cu solder bump with Ti/Ni/Cu under-bump metallization after temperature cycling tests

NASA Astrophysics Data System (ADS)

Shih, T. I.; Lin, Y. C.; Duh, J. G.; Hsu, Tom

2006-10-01

Lead-free solder bumps have been widely used in current flip-chip technology (FCT) due to environmental issues. Solder joints after temperature cycling tests were employed to investigate the interfacial reaction between the Ti/Ni/Cu under-bump metallization and Sn-Ag-Cu solders. The interfacial morphology and quantitative analysis of the intermetallic compounds (IMCs) were obtained by electron probe microanalysis (EPMA) and field emission electron probe microanalysis (FE-EPMA). Various types of IMCs such as (Cu1-x,Agx)6Sn5, (Cu1-y,Agy)3Sn, and (Ag1-z,Cuz)3Sn were observed. In addition to conventional I-V measurements by a special sample preparation technique, a scanning electron microscope (SEM) internal probing system was introduced to evaluate the electrical characteristics in the IMCs after various test conditions. The electrical data would be correlated to microstructural evolution due to the interfacial reaction between the solder and under-bump metallurgy (UBM). This study demonstrated the successful employment of an internal nanoprobing approach, which would help further understanding of the electrical behavior within an IMC layer in the solder/UBM assembly.

Effects of Surface Finishes and Current Stressing on Interfacial Reaction Characteristics of Sn-3.0Ag-0.5Cu Solder Bumps

NASA Astrophysics Data System (ADS)

Kim, Jae-Myeong; Jeong, Myeong-Hyeok; Yoo, Sehoon; Park, Young-Bae

2012-04-01

The effects of surface finishes on the in situ interfacial reaction characteristics of ball grid array (BGA) Sn-3.0Ag-0.5Cu lead-free solder bumps were investigated under annealing and electromigration (EM) test conditions of 130°C to 175°C with 5.0 × 103 A/cm2. During reflow and annealing, (Cu,Ni)6Sn5 intermetallic compound (IMC) formed at the interface of electroless nickel immersion gold (ENIG) finish. In the case of both immersion Sn and organic solderability preservative (OSP) finishes, Cu6Sn5 and Cu3Sn IMCs formed. Overall, the IMC growth velocity of ENIG was much lower than that of the other finishes. The activation energies of total IMCs were found to be 0.52 eV for ENIG, 0.78 eV for immersion Sn, and 0.72 eV for OSP. The ENIG finish appeared to present an effective diffusion barrier between the Cu substrate and the solder, which leads to better EM reliability in comparison with Cu-based pad systems. The failure mechanisms were explored in detail via in situ EM tests.

Multiphoton imaging of low grade, high grade intraepithelial neoplasia and intramucosal invasive cancer of esophagus

NASA Astrophysics Data System (ADS)

Xu, Jian; Jiang, Liwei; Kang, Deyong; Wu, Xuejing; Xu, Meifang; Zhuo, Shuangmu; Zhu, Xiaoqin; Lin, Jiangbo; Chen, Jianxin

2017-04-01

Esophageal squamous cell carcinoma (ESCC) is devastating because of its aggressive lymphatic spread and clinical course. It is believed to occur through low-grade intraepithelial neoplasia (LGIN), high-grade intraepithelial neoplasia (HGIN), and intramucosal invasive cancer (IMC) before transforming to submucosal cancer. In particular, these early lesions (LGIN, HGIN and IMC), which involve no lymph node nor distant metastasis, can be cured by endoscopic treatment. Therefore, early identification of these lesions is important so as to offer a curative endoscopic resection, thus slowing down the development of ESCC. In this work, spectral information and morphological features of the normal esophageal mucosa are first studied. Then, the morphological changes of LGIN, HGIN and IMC are described. Lastly, quantitative parameters are also extracted by calculating the nuclear-to-cytoplasmic ratio of epithelial cells and the pixel density of collagen in the lamina propria. These results show that multiphoton microscopy (MPM) has the ability to identify normal esophageal mucosa, LGIN, HGIN and IMC. With the development of multiphoton endoscope systems for in vivo imaging, combined with a laser ablation system, MPM has the potential to provide immediate pathologic diagnosis and curative treatment of ESCC before the transformation to submucosal cancer in the future.

Evaluation of Die-Attach Bonding Using High-Frequency Ultrasonic Energy for High-Temperature Application

NASA Astrophysics Data System (ADS)

Lee, Jong-Bum; Aw, Jie-Li; Rhee, Min-Woo

2014-09-01

Room-temperature die-attach bonding using ultrasonic energy was evaluated on Cu/In and Cu/Sn-3Ag metal stacks. The In and Sn-3Ag layers have much lower melting temperatures than the base material (Cu) and can be melted through the heat generated during ultrasonic bonding, forming intermetallic compounds (IMCs). Samples were bonded using different ultrasonic powers, bonding times, and forces and subsequently aged at 300°C for 500 h. After aging, die shear testing was performed and the fracture surfaces were inspected by scanning electron microscopy. Results showed that the shear strength of Cu/In joints reached an upper plateau after 100 h of thermal aging and remained stable with aging time, whereas that of the Cu/Sn-3Ag joints decreased with increasing aging time. η-Cu7In4 and (Cu,Au)11In9 IMCs were observed at the Cu/In joint, while Cu3Sn and (Ag,Cu)3Sn IMCs were found at the Cu/Sn-3Ag joint after reliability testing. As Cu-based IMCs have high melting temperatures, they are highly suitable for use in high-temperature electronics, but can be formed at room temperature using an ultrasonic approach.

Homogeneous (Cu, Ni)6Sn5 intermetallic compound joints rapidly formed in asymmetrical Ni/Sn/Cu system using ultrasound-induced transient liquid phase soldering process.

PubMed

Li, Z L; Dong, H J; Song, X G; Zhao, H Y; Tian, H; Liu, J H; Feng, J C; Yan, J C

2018-04-01

Homogeneous (Cu, Ni) 6 Sn 5 intermetallic compound (IMC) joints were rapidly formed in asymmetrical Ni/Sn/Cu system by an ultrasound-induced transient liquid phase (TLP) soldering process. In the traditional TLP soldering process, the intermetallic joints formed in Ni/Sn/Cu system consisted of major (Cu, Ni) 6 Sn 5 and minor Cu 3 Sn IMCs, and the grain morphology of (Cu, Ni) 6 Sn 5 IMCs subsequently exhibited fine rounded, needlelike and coarse rounded shapes from the Ni side to the Cu side, which was highly in accordance with the Ni concentration gradient across the joints. However, in the ultrasound-induced TLP soldering process, the intermetallic joints formed in Ni/Sn/Cu system only consisted of the (Cu, Ni) 6 Sn 5 IMCs which exhibited an uniform grain morphology of rounded shape with a remarkably narrowed Ni concentration gradient. The ultrasound-induced homogeneous intermetallic joints exhibited higher shear strength (61.6 MPa) than the traditional heterogeneous intermetallic joints (49.8 MPa). Copyright © 2017 Elsevier B.V. All rights reserved.

Experimental demonstration of invisible electromagnetic impedance matching cylindrical transformation optics cloak shell

NASA Astrophysics Data System (ADS)

Chen, Mingji; Wang, Changxian; Cheng, Xiaodong; Gong, Congcheng; Song, Weili; Yuan, Xujin; Fang, Daining

2018-04-01

The realization of an ideal invisible cloak implementing transformation optics is still missing. An impedance matching concept is implanted into transformation optics cloak to generate an impedance matching cloak (IMC) shell. In this work, it is proved that impedance matching structure reduces the cloaking structure’s disturbance to a propagating electromagnetic field and improves its invisibility measured by scattering field intensity. Such a cylindrical IMC shell is designed, fabricated with proposed rounded rectangular split-ring-resonators (RR-SRRs), and experimental measurements show the total scattering field of a perfect electric conductor (PEC) cylinder surrounded by an IMC shell is improved greatly compared to the PEC cylinder showing electromagnetic wave front ripple suppression and a considerable scattering shrinking effect. IMC shell backward scattering field is suppressed down to 7.29%, compared to the previous value of 86.7% due to its impedance matching character, and overall scattering field intensity shrinking is down to 19.3% compared to the previously realized value of 56.4%. Sideward scattering field recorded in the experiment also has a remarkable improvement compared to the PEC cylinder. The impedance matching concept might enlighten the realization of an ideal cloak and other novel electromagnetic cloaking and shielding structures.

Solid state synthesis, structural, physicochemical and optical properties of an inter-molecular compound: 2-hydroxy-1, 2-diphenylethanone-4-nitro-o-phenylenediamine system

NASA Astrophysics Data System (ADS)

Rai, U. S.; Singh, Manjeet; Rai, R. N.

2017-09-01

The phase diagram of 2-hydroxy-1, 2-diphenylethanone (HDPE)-4-nitro-o-phenylenediamine (NOPDA) system, determined by the thaw-melt method, gives two eutectics E1 (m p = 66.0 °C) and E2 (m p = 155.0 °C) with 0.30 and 0.55 mol fractions of NOPDA, respectively, and an 1:1 inter-molecular compound (IMC) (m p 162.0 °C). This IMC was synthesized by adopting the green synthetic method of solid state reaction. While its formation and structure were confirmed by the X-ray diffraction and spectroscopic methods, the ORTEP view gives mode of crystal packing, C‒H…O, C‒H…N, π-π stacking and the inter-molecular hydrogen bonding in the compound. The single crystal of the IMC shows 53% transmission and emits significantly higher dual fluorescence, and the band gap was computed to be 3.04 eV. The values of solubility of the IMC, measured in the temperature range 304-322 K, satisfy the mole fraction (X) and temperature equation: Xeq= 5.1324 × 10-7 e 0.01356T.

Influence of Zn Interlayer on Interfacial Microstructure and Mechanical Properties of TIG Lap-Welded Mg/Al Joints

NASA Astrophysics Data System (ADS)

Gao, Qiong; Wang, Kehong

2016-03-01

This study explored 6061 Al alloy and AZ31B Mg alloy joined by TIG lap welding with Zn foils of varying thicknesses, with the additional Zn element being imported into the fusion zone to alloy the weld seam. The microstructures and chemical composition in the fusion zone near the Mg substrate were examined by SEM and EDS, and tensile shear strength tests were conducted to investigate the mechanical properties of the Al/Mg joints, as well as the fracture surfaces, and phase compositions. The results revealed that the introduction of an appropriate amount of Zn transition layer improves the microstructure of Mg/Al joints and effectively reduces the formation of Mg-Al intermetallic compounds (IMCs). The most common IMCs in the fusion zone near the Mg substrate were Mg-Zn and Mg-Al-Zn IMCs. The type and distribution of IMCs generated in the weld zone differed according to Zn additions; Zn interlayer thickness of 0.4 mm improved the sample's mechanical properties considerably compared to thicknesses of less than 0.4 mm; however, any further increase in Zn interlayer thickness of above 0.4 mm caused mechanical properties to deteriorate.

GNAS Maintenance Control Center (GMCC) Design Qualification Test and Evaluation (DQT&E) Test Procedures

DTIC Science & Technology

1992-06-01

connected to one MPS via BROUTERS and modems ). b. MPS - RMMS interface to the GMCC. The IMCS software running on the MPS will.be used to monitor the...Start Date: TODAYS DATE REGION: SO Sector: 56K 69. GPWS: Press FI0 (PRODUCE REPORT) to generate the report. 70. GPWS: Press F12 (REPORT STATUS) to

Asymmetrical interfacial reactions of Ni/SAC101(NiIn)/Ni solder joint induced by current stressing

NASA Astrophysics Data System (ADS)

Lin, Chen-Yi; Chiu, Tsung-Chieh; Lin, Kwang-Lung

2018-03-01

An electric current can asymmetrically trigger either atomic migration or interfacial reactions between a cathode and an anode. The present study investigated the dissolution of metallization and formation of an interfacial intermetallic compound (IMC) in the Cu/Ni/Sn1.0Ag0.1Cu0.02Ni0.05In/Ni/Cu solder joint at various current densities in the order of 103 A/cm2 at temperatures ranging from 100 °C to 150 °C. The polarization behavior of Ni dissolution and IMC formation under current stressing were systematically investigated. The asymmetrical interfacial reactions of the solder joint were found to be greatly influenced by ambient temperature. The dissolution of Ni and its effect on interfacial IMC formation were also discussed.

A maximum entropy fracture model for low and high strain-rate fracture in TinSilverCopper alloys

NASA Astrophysics Data System (ADS)

Chan, Dennis K.

SnAgCu solder alloys exhibit significant rate-dependent constitutive behavior. Solder joints made of these alloys exhibit failure modes that are also rate-dependent. Solder joints are an integral part of microelectronic packages and are subjected to a wide variety of loading conditions which range from thermo-mechanical fatigue to impact loading. Consequently, there is a need for non-empirical rate-dependent failure theory that is able to accurately predict fracture in these solder joints. In the present thesis, various failure models are first reviewed. But, these models are typically empirical or are not valid for solder joints due to limiting assumptions such as elastic behavior. Here, the development and validation of a maximum entropy fracture model (MEFM) valid for low strain-rate fracture in SnAgCu solders is presented. To this end, work on characterizing SnAgCu solder behavior at low strain-rates using a specially designed tester to estimate parameters for constitutive models is presented. Next, the maximum entropy fracture model is reviewed. This failure model uses a single damage accumulation parameter and relates the risk of fracture to accumulated inelastic dissipation. A methodology is presented to extract this model parameter through a custom-built microscale mechanical tester for Sn3.8Ag0.7Cu solder. This single parameter is used to numerically simulate fracture in two solder joints with entirely different geometries. The simulations are compared to experimentally observed fracture in these same packages. Following the simulations of fracture at low strain rate, the constitutive behavior of solder alloys across nine decades of strain rates through MTS compression tests and split-Hopkinson bar are presented. Preliminary work on using orthogonal machining as novel technique of material characterization at high strain rates is also presented. The resultant data from the MTS compression and split-Hopkinson bar tester is used to demonstrate the localization of stress to the interface of solder joints at high strain rates. The MEFM is further extended to predict failure in brittle materials. Such an extension allows for fracture prediction within intermetallic compounds (IMCs) in solder joints. It has been experimentally observed that the failure mode shifts from bulk solder to the IMC layer with increasing loading rates. The extension of the MEFM would allow for prediction of the fracture mode within the solder joint under different loading conditions. A fracture model capable of predicting failure modes at higher strain rates is necessary, as mobile electronics are becoming ubiquitous. Mobile devices are prone to being dropped which can induce loading rates within solder joints that are much larger than experienced under thermo-mechanical fatigue. A range of possible damage accumulation parameters for Cu6Sn 5 is determined for the MEFM. A value within the aforementioned range is used to demonstrate the increasing likelihood of IMC fracture in solder joints with larger loading rates. The thesis is concluded with remarks about ongoing work that include determining a more accurate damage accumulation parameter for Cu6Sn 5 IMC, and on using machining as a technique for extracting failure parameters for the MEFM.

A Report of Perceptions of Censorship of IMC Materials in 1982-83 from a State-Level Perspective.

ERIC Educational Resources Information Center

Hopkins, Dianne McAfee

A survey was conducted in August and September 1983 to ascertain the perceptions of state leaders regarding censorship of K-12 instructional media center (IMC) materials during the 1982-83 school year. Of the 53 surveys sent to persons involved with state-level library media programs, 42 responses representing 41 states and one territory were…

The Identification and Role of School Libraries that Function as Instructional Materials Centers and Implications for Library Education in the United States.

ERIC Educational Resources Information Center

Lohrer, Alice

In 1961, the American Association of School Librarians requested a status study to identify elementary, junior and senior high school library programs which serve as instructional materials centers (IMC). An IMC library provides all types of instructional materials and services for teachers and pupils. Initial findings, which were tabulated after…

GUIDE FOR SELF-EXAMINATION AND PLANNING, THE CLUB ANALYSIS PROGRAM OF INDUSTRIAL MANAGEMENT CLUBS OF THE YMCA.

ERIC Educational Resources Information Center

MEYER, WILLIAM F.

THIS GUIDE PROVIDES A QUESTION AND ANSWER METHOD IN WHICH LEADERS OF INDUSTRIAL MANAGEMENT CLUBS (IMC) MAY EVALUATE CLUB PROGRESS AND ACCOMPLISHMENTS. A REPORT OF A NATIONAL STUDY MADE BY GEORGE WILLIAMS COLLEGE ON I.M.C. MEMBERS AND THEIR ATTITUDES TOWARD CLUB PROGRESS IS PROVIDED AS A GUIDE FOR GATHERING INFORMATION. A SMALL CORE STEERING…

Censorship of IMC Materials in Wisconsin Schools. Part I: Focus on Middle/Junior High Schools. Results of a Survey Conducted in May 1980.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison.

Professional staff in school libraries and instructional media centers (IMCs) located in 229 Wisconsin middle and junior high schools were surveyed anonymously to collect information on censorship attempts in their schools during 1978-79 and 1979-80. A total of 212 surveys were returned. Survey participants were asked to respond to questions…

Important challenges for coordination and inter-municipal cooperation in health care services: a Delphi study

PubMed Central

2013-01-01

Background Demographical changes have stimulated a coordination reform in the Norwegian health care sector, creating new working practices and extending coordination within and between primary and hospital care, increasing the need for inter-municipal cooperation (IMC). This study aimed to identify challenges to coordination and IMC in the Norwegian health care sector as a basis for further theorizing and managerial advice in this growing area of research and practice. Methods A Delphi study of consensus development was used. Experts in coordination and IMC in health care services were selected by the healthcare manager or the councillor in their respective municipalities. In the first round, an expert panel received open-ended questions addressing possible challenges, and their answers were categorized and consolidated as the basis for further validation in the second round. The expert panel members were then asked to point out important statements in the third round, before the most important statements ranked by a majority of the members were rated again in the fourth round, including the option to explain the ratings. The same procedure was used in round five, with the exception that the expert panel members could view the consolidated results of their previous rankings as the basis for a new and final rating. The statements reaching consensus in round five were abstracted and themed. Results Nineteen experts consented to participate. Nine experts (47%) completed all of the five rounds. Eight statements concerning coordination reached consensus, resulting in four themes covering these challenges: different culture, uneven balance of power, lack of the possibility to communicate electronically, and demanding tasks in relation to resources. Three statements regarding challenges to IMC reached consensus, resulting in following themes: coopetition, complex leadership, and resistance to change. Conclusions This study identified several important challenges for coordination and it supports previous research. IMC in health care services deals with challenges other than coordination, and these must be addressed specifically. Our study contributes to extended knowledge of theoretical and practical implications in the field of coordination and IMC in health care sector. PMID:24171839

Exposure of the Heart in Breast Cancer Radiation Therapy: A Systematic Review of Heart Doses Published During 2003 to 2013.

PubMed

Taylor, Carolyn W; Wang, Zhe; Macaulay, Elizabeth; Jagsi, Reshma; Duane, Frances; Darby, Sarah C

2015-11-15

Breast cancer radiation therapy cures many women, but where the heart is exposed, it can cause heart disease. We report a systematic review of heart doses from breast cancer radiation therapy that were published during 2003 to 2013. Eligible studies were those reporting whole-heart dose (ie, dose averaged over the whole heart). Analyses considered the arithmetic mean of the whole-heart doses for the CT plans for each regimen in each study. We termed this "mean heart dose." In left-sided breast cancer, mean heart dose averaged over all 398 regimens reported in 149 studies from 28 countries was 5.4 Gy (range, <0.1-28.6 Gy). In regimens that did not include the internal mammary chain (IMC), average mean heart dose was 4.2 Gy and varied with the target tissues irradiated. The lowest average mean heart doses were from tangential radiation therapy with either breathing control (1.3 Gy; range, 0.4-2.5 Gy) or treatment in the lateral decubitus position (1.2 Gy; range, 0.8-1.7 Gy), or from proton radiation therapy (0.5 Gy; range, 0.1-0.8 Gy). For intensity modulated radiation therapy mean heart dose was 5.6 Gy (range, <0.1-23.0 Gy). Where the IMC was irradiated, average mean heart dose was around 8 Gy and varied little according to which other targets were irradiated. Proton radiation therapy delivered the lowest average mean heart dose (2.6 Gy, range, 1.0-6.0 Gy), and tangential radiation therapy with a separate IMC field the highest (9.2 Gy, range, 1.9-21.0 Gy). In right-sided breast cancer, the average mean heart dose was 3.3 Gy based on 45 regimens in 23 studies. Recent estimates of typical heart doses from left breast cancer radiation therapy vary widely between studies, even for apparently similar regimens. Maneuvers to reduce heart dose in left tangential radiation therapy were successful. Proton radiation therapy delivered the lowest doses. Inclusion of the IMC doubled typical heart dose. Copyright © 2015 Elsevier Inc. All rights reserved.

The effect of intermetallic compound morphology on Cu diffusion in Sn-Ag and Sn-Pb solder bump on the Ni/Cu Under-bump metallization

NASA Astrophysics Data System (ADS)

Jang, Guh-Yaw; Duh, Jenq-Gong

2005-01-01

The eutectic Sn-Ag solder alloy is one of the candidates for the Pb-free solder, and Sn-Pb solder alloys are still widely used in today’s electronic packages. In this tudy, the interfacial reaction in the eutectic Sn-Ag and Sn-Pb solder joints was investigated with an assembly of a solder/Ni/Cu/Ti/Si3N4/Si multilayer structures. In the Sn-3.5Ag solder joints reflowed at 260°C, only the (Ni1-x,Cux)3Sn4 intermetallic compound (IMC) formed at the solder/Ni interface. For the Sn-37Pb solder reflowed at 225°C for one to ten cycles, only the (Ni1-x,Cux)3Sn4 IMC formed between the solder and the Ni/Cu under-bump metallization (UBM). Nevertheless, the (Cu1-y,Niy)6Sn5 IMC was observed in joints reflowed at 245°C after five cycles and at 265°C after three cycles. With the aid of microstructure evolution, quantitative analysis, and elemental distribution between the solder and Ni/Cu UBM, it was revealed that Cu content in the solder near the solder/IMC interface played an important role in the formation of the (Cu1-y,Niy)6Sn5 IMC. In addition, the diffusion behavior of Cu in eutectic Sn-Ag and Sn-Pb solders with the Ni/Cu UBM were probed and discussed. The atomic flux of Cu diffused through Ni was evaluated by detailed quantitative analysis in an electron probe microanalyzer (EPMA). During reflow, the atomic flux of Cu was on the order of 1016-1017 atoms/cm2sec in both the eutectic Sn-Ag and Sn-Pb systems.

Outcome of Whole Exome Sequencing for Diagnostic Odyssey Cases of an Individualized Medicine Clinic: The Mayo Clinic Experience.

PubMed

Lazaridis, Konstantinos N; Schahl, Kimberly A; Cousin, Margot A; Babovic-Vuksanovic, Dusica; Riegert-Johnson, Douglas L; Gavrilova, Ralitza H; McAllister, Tammy M; Lindor, Noralane M; Abraham, Roshini S; Ackerman, Michael J; Pichurin, Pavel N; Deyle, David R; Gavrilov, Dimitar K; Hand, Jennifer L; Klee, Eric W; Stephens, Michael C; Wick, Myra J; Atkinson, Elizabeth J; Linden, David R; Ferber, Matthew J; Wieben, Eric D; Farrugia, Gianrico

2016-03-01

To describe the experience and outcome of performing whole-exome sequencing (WES) for resolution of patients on a diagnostic odyssey in the first 18 months of an individualized medicine clinic (IMC). The IMC offered WES to physicians of Mayo Clinic practice for patients with suspected genetic disease. DNA specimens of the proband and relatives were submitted to WES laboratories. We developed the Genomic Odyssey Board with multidisciplinary expertise to determine the appropriateness for IMC services, review WES reports, and make the final decision about whether the exome findings explain the disease. This study took place from September 30, 2012, to March 30, 2014. In the first 18 consecutive months, the IMC received 82 consultation requests for patients on a diagnostic odyssey. The Genomic Odyssey Board deferred 7 cases and approved 75 cases to proceed with WES. Seventy-one patients met with an IMC genomic counselor. Fifty-one patients submitted specimens for WES testing, and the results have been received for all. There were 15 cases in which a diagnosis was made on the basis of WES findings; thus, the positive diagnostic yield of this practice was 29%. The mean cost per patient for this service was approximately $8000. Medicaid supported 27% of the patients, and 38% of patients received complete or partial insurance coverage. The significant diagnostic yield, moderate cost, and notable health marketplace acceptance for WES compared with conventional genetic testing make the former method a rational diagnostic approach for patients on a diagnostic odyssey. Copyright © 2016 Mayo Foundation for Medical Education and Research. Published by Elsevier Inc. All rights reserved.

An Inner Membrane Cytochrome Required Only for Reduction of High Redox Potential Extracellular Electron Acceptors

PubMed Central

Levar, Caleb E.; Chan, Chi Ho; Mehta-Kolte, Misha G.

2014-01-01

ABSTRACT Dissimilatory metal-reducing bacteria, such as Geobacter sulfurreducens, transfer electrons beyond their outer membranes to Fe(III) and Mn(IV) oxides, heavy metals, and electrodes in electrochemical devices. In the environment, metal acceptors exist in multiple chelated and insoluble forms that span a range of redox potentials and offer different amounts of available energy. Despite this, metal-reducing bacteria have not been shown to alter their electron transfer strategies to take advantage of these energy differences. Disruption of imcH, encoding an inner membrane c-type cytochrome, eliminated the ability of G. sulfurreducens to reduce Fe(III) citrate, Fe(III)-EDTA, and insoluble Mn(IV) oxides, electron acceptors with potentials greater than 0.1 V versus the standard hydrogen electrode (SHE), but the imcH mutant retained the ability to reduce Fe(III) oxides with potentials of ≤−0.1 V versus SHE. The imcH mutant failed to grow on electrodes poised at +0.24 V versus SHE, but switching electrodes to −0.1 V versus SHE triggered exponential growth. At potentials of ≤−0.1 V versus SHE, both the wild type and the imcH mutant doubled 60% slower than at higher potentials. Electrodes poised even 100 mV higher (0.0 V versus SHE) could not trigger imcH mutant growth. These results demonstrate that G. sulfurreducens possesses multiple respiratory pathways, that some of these pathways are in operation only after exposure to low redox potentials, and that electron flow can be coupled to generation of different amounts of energy for growth. The redox potentials that trigger these behaviors mirror those of metal acceptors common in subsurface environments where Geobacter is found. PMID:25425235

Berberine Induces Caspase-Independent Cell Death in Colon Tumor Cells through Activation of Apoptosis-Inducing Factor

PubMed Central

Wang, Lihong; Liu, Liping; Shi, Yan; Cao, Hanwei; Chaturvedi, Rupesh; Calcutt, M. Wade; Hu, Tianhui; Ren, Xiubao; Wilson, Keith T.; Polk, D. Brent; Yan, Fang

2012-01-01

Berberine, an isoquinoline alkaloid derived from plants, is a traditional medicine for treating bacterial diarrhea and intestinal parasite infections. Although berberine has recently been shown to suppress growth of several tumor cell lines, information regarding the effect of berberine on colon tumor growth is limited. Here, we investigated the mechanisms underlying the effects of berberine on regulating the fate of colon tumor cells, specifically the mouse immorto-Min colonic epithelial (IMCE) cells carrying the Apc min mutation, and of normal colon epithelial cells, namely young adult mouse colonic epithelium (YAMC) cells. Berberine decreased colon tumor colony formation in agar, and induced cell death and LDH release in a time- and concentration-dependent manner in IMCE cells. In contrast, YAMC cells were not sensitive to berberine-induced cell death. Berberine did not stimulate caspase activation, and PARP cleavage and berberine-induced cell death were not affected by a caspase inhibitor in IMCE cells. Rather, berberine stimulated a caspase-independent cell death mediator, apoptosis-inducing factor (AIF) release from mitochondria and nuclear translocation in a ROS production-dependent manner. Amelioration of berberine-stimulated ROS production or suppression of AIF expression blocked berberine-induced cell death and LDH release in IMCE cells. Furthermore, two targets of ROS production in cells, cathepsin B release from lysosomes and PARP activation were induced by berberine. Blockage of either of these pathways decreased berberine-induced AIF activation and cell death in IMCE cells. Thus, berberine-stimulated ROS production leads to cathepsin B release and PARP activation-dependent AIF activation, resulting in caspase-independent cell death in colon tumor cells. Notably, normal colon epithelial cells are less susceptible to berberine-induced cell death, which suggests the specific inhibitory effects of berberine on colon tumor cell growth. PMID:22574158

Reactions in Electrodeposited Cu/Sn and Cu/Ni/Sn Nanoscale Multilayers for Interconnects

PubMed Central

Chia, Pay Ying; Haseeb, A. S. M. A.; Mannan, Samjid Hassan

2016-01-01

Miniaturization of electronic devices has led to the development of 3D IC packages which require ultra-small-scale interconnections. Such small interconnects can be completely converted into Cu-Sn based intermetallic compounds (IMCs) after reflow. In an effort to improve IMC based interconnects, an attempt is made to add Ni to Cu-Sn-based IMCs. Multilayer interconnects consisting of stacks of Cu/Sn/Cu/Sn/Cu or Cu/Ni/Sn/Ni/Sn/Cu/Ni/Sn/Ni/Cu with Ni = 35 nm, 70 nm, and 150 nm were electrodeposited sequentially using copper pyrophosphate, tin methanesulfonic, and nickel Watts baths, respectively. These multilayer interconnects were investigated under room temperature aging conditions and for solid-liquid reactions, where the samples were subjected to 250 °C reflow for 60 s and also 300 °C for 3600 s. The progress of the reaction in the multilayers was monitored by using X-ray Diffraction, Scanning Electron Microscope, and Energy dispersive X-ray Spectroscopy. FIB-milled samples were also prepared for investigation under room temperature aging conditions. Results show that by inserting a 70 nanometres thick Ni layer between copper and tin, premature reaction between Cu and Sn at room temperature can be avoided. During short reflow, the addition of Ni suppresses formation of Cu3Sn IMC. With increasing Ni thickness, Cu consumption is decreased and Ni starts acting as a barrier layer. On the other hand, during long reflow, two types of IMC were found in the Cu/Ni/Sn samples which are the (Cu,Ni)6Sn5 and (Cu,Ni)3Sn, respectively. Details of the reaction sequence and mechanisms are discussed. PMID:28773552

An inner membrane cytochrome required only for reduction of high redox potential extracellular electron acceptors

DOE PAGES

Levar, Caleb E.; Chan, Chi Ho; Mehta-Kolte, Misha G.; ...

2014-10-28

Dissimilatory metal-reducing bacteria, such as Geobacter sulfurreducens, transfer electrons beyond their outer membranes to Fe(III) and Mn(IV) oxides, heavy metals, and electrodes in electrochemical devices. In the environment, metal acceptors exist in multiple chelated and insoluble forms that span a range of redox potentials and offer different amounts of available energy. Despite this, metal-reducing bacteria have not been shown to alter their electron transfer strategies to take advantage of these energy differences. Disruption of imcH, encoding an inner membrane c-type cytochrome, eliminated the ability of G. sulfurreducens to reduce Fe(III) citrate, Fe(III)-EDTA, and insoluble Mn(IV) oxides, electron acceptors with potentialsmore » greater than 0.1 V versus the standard hydrogen electrode (SHE), but the imcH mutant retained the ability to reduce Fe(III) oxides with potentials of ≤–0.1 V versus SHE. The imcH mutant failed to grow on electrodes poised at +0.24 V versus SHE, but switching electrodes to –0.1 V versus SHE triggered exponential growth. At potentials of ≤–0.1 V versus SHE, both the wild type and the imcH mutant doubled 60% slower than at higher potentials. Electrodes poised even 100 mV higher (0.0 V versus SHE) could not trigger imcH mutant growth. These results demonstrate that G. sulfurreducens possesses multiple respiratory pathways, that some of these pathways are in operation only after exposure to low redox potentials, and that electron flow can be coupled to generation of different amounts of energy for growth. Redox potentials that trigger these behaviors mirror those of metal acceptors common in subsurface environments where Geobacter is found.« less

SVPWM Technique with Varying DC-Link Voltage for Common Mode Voltage Reduction in a Matrix Converter and Analytical Estimation of its Output Voltage Distortion

NASA Astrophysics Data System (ADS)

Padhee, Varsha

Common Mode Voltage (CMV) in any power converter has been the major contributor to premature motor failures, bearing deterioration, shaft voltage build up and electromagnetic interference. Intelligent control methods like Space Vector Pulse Width Modulation (SVPWM) techniques provide immense potential and flexibility to reduce CMV, thereby targeting all the afore mentioned problems. Other solutions like passive filters, shielded cables and EMI filters add to the volume and cost metrics of the entire system. Smart SVPWM techniques therefore, come with a very important advantage of being an economical solution. This thesis discusses a modified space vector technique applied to an Indirect Matrix Converter (IMC) which results in the reduction of common mode voltages and other advanced features. The conventional indirect space vector pulse-width modulation (SVPWM) method of controlling matrix converters involves the usage of two adjacent active vectors and one zero vector for both rectifying and inverting stages of the converter. By suitable selection of space vectors, the rectifying stage of the matrix converter can generate different levels of virtual DC-link voltage. This capability can be exploited for operation of the converter in different ranges of modulation indices for varying machine speeds. This results in lower common mode voltage and improves the harmonic spectrum of the output voltage, without increasing the number of switching transitions as compared to conventional modulation. To summarize it can be said that the responsibility of formulating output voltages with a particular magnitude and frequency has been transferred solely to the rectifying stage of the IMC. Estimation of degree of distortion in the three phase output voltage is another facet discussed in this thesis. An understanding of the SVPWM technique and the switching sequence of the space vectors in detail gives the potential to estimate the RMS value of the switched output voltage of any converter. This conceivably aids the sizing and design of output passive filters. An analytical estimation method has been presented to achieve this purpose for am IMC. Knowledge of the fundamental component in output voltage can be utilized to calculate its Total Harmonic Distortion (THD). The effectiveness of the proposed SVPWM algorithms and the analytical estimation technique is substantiated by simulations in MATLAB / Simulink and experiments on a laboratory prototype of the IMC. Proper comparison plots have been provided to contrast the performance of the proposed methods with the conventional SVPWM method. The behavior of output voltage distortion and CMV with variation in operating parameters like modulation index and output frequency has also been analyzed.

Inventory of Archaeological and Historical Resources Lava Flow Control Study, Hilo, Hawaii,

DTIC Science & Technology

1979-05-01

amale- p 11111 S.PIaN. Sitea card; hial. 1971 :2 aa. INVENTRh Y OF AIIAj4AOLGICAL AND HISIORICAL ESItIMCES Sit umber Site Ded𔃻ption e Period Coed...liaison. 1932:294 SO-a-Al-ST Kalled , paved 4 PPI.Site Card; NHudson, 1932:29S.2W6 terraced platorm bo-Li-AI. 55$ Legendary crevite, Esrsaa% 1903:Is

Aviation spatial orientation in relationship to head position and attitude interpretation.

PubMed

Patterson, F R; Cacioppo, A J; Gallimore, J J; Hinman, G E; Nalepka, J P

1997-06-01

Conventional wisdom describing aviation spatial awareness assumes that pilots view a moving horizon through the windscreen. This assumption presupposes head alignment with the cockpit "Z" axis during both visual (VMC) and instrument (IMC) maneuvers. Even though this visual paradigm is widely accepted, its accuracy has not been verified. The purpose of this research was to determine if a visually induced neck reflex causes pilots to align their heads toward the horizon, rather than the cockpit vertical axis. Based on literature describing reflexive head orientation in terrestrial environments it was hypothesized that during simulated VMC aircraft maneuvers, pilots would align their heads toward the horizon. Some 14 military pilots completed two simulated flights in a stationary dome simulator. The flight profile consisted of five separate tasks, four of which evaluated head tilt during exposure to unique visual conditions and one examined occurrences of disorientation during unusual attitude recovery. During simulated visual flight maneuvers, pilots tilted their heads toward the horizon (p < 0.0001). Under IMC, pilots maintained head alignment with the vertical axis of the aircraft. During VMC maneuvers pilots reflexively tilt their heads toward the horizon, away from the Gz axis of the cockpit. Presumably, this behavior stabilizes the retinal image of the horizon (1 degree visual-spatial cue), against which peripheral images of the cockpit (2 degrees visual-spatial cue) appear to move. Spatial disorientation, airsickness, and control reversal error may be related to shifts in visual-vestibular sensory alignment during visual transitions between VMC (head tilt) and IMC (Gz head stabilized) conditions.

The role of situation assessment and flight experience in pilots' decisions to continue visual flight rules flight into adverse weather.

PubMed

Wiegmann, Douglas A; Goh, Juliana; O'Hare, David

2002-01-01

Visual flight rules (VFR) flight into instrument meteorological conditions (IMC) is a major safety hazard in general aviation. In this study we examined pilots' decisions to continue or divert from a VFR flight into IMC during a dynamic simulation of a cross-country flight. Pilots encountered IMC either early or later into the flight, and the amount of time and distance pilots flew into the adverse weather prior to diverting was recorded. Results revealed that pilots who encountered the deteriorating weather earlier in the flight flew longer into the weather prior to diverting and had more optimistic estimates of weather conditions than did pilots who encountered the deteriorating weather later in the flight. Both the time and distance traveled into the weather prior to diverting were negatively correlated with pilots' previous flight experience. These findings suggest that VFR flight into IMC may be attributable, at least in part, to poor situation assessment and experience rather than to motivational judgment that induces risk-taking behavior as more time and effort are invested in a flight. Actual or potential applications of this research include the design of interventions that focus on improving weather evaluation skills in addition to addressing risk-taking attitudes.

Facile synthesis of functionalized ionic surfactant templated mesoporous silica for incorporation of poorly water-soluble drug.

PubMed

Li, Jing; Xu, Lu; Yang, Baixue; Wang, Hongyu; Bao, Zhihong; Pan, Weisan; Li, Sanming

2015-08-15

The present paper reported amino group functionalized anionic surfactant templated mesoporous silica (Amino-AMS) for loading and release of poorly water-soluble drug indomethacin (IMC) and carboxyl group functionalized cationic surfactant templated mesoporous silica (Carboxyl-CMS) for loading and release of poorly water-soluble drug famotidine (FMT). Herein, Amino-AMS and Carboxyl-CMS were facilely synthesized using co-condensation method through two types of silane coupling agent. Amino-AMS was spherical nanoparticles, and Carboxyl-CMS was well-formed spherical nanosphere with a thin layer presented at the edge. Drug loading capacity was obviously enhanced when using Amino-AMS and Carboxyl-CMS as drug carriers due to the stronger hydrogen bonding force formed between surface modified carrier and drug. Amino-AMS and Carboxyl-CMS had the ability to transform crystalline state of loaded drug from crystalline phase to amorphous phase. Therefore, IMC loaded Amino-AMS presented obviously faster release than IMC because amorphous phase of IMC favored its dissolution. The application of asymmetric membrane capsule delayed FMT release significantly, and Carboxyl-CMS favored sustained release of FMT due to its long mesoporous channels and strong interaction formed between its carboxyl group and amino group of FMT. Copyright © 2015 Elsevier B.V. All rights reserved.

Health-hazard evaluation report HETA 91-338-2187, IMC Corporation, Sterlington, Louisiana

DOE Office of Scientific and Technical Information (OSTI.GOV)

Kiefer, M.; Tepper, A.; Miller, R.

1992-03-01

In response to a request from an authorized representative of the Construction and General Laborers Union, Local 762, an investigation was made of potential hazards for asbestos abatement contract workers at IMC Corporation, (SIC-2869), Sterlington, Louisiana. The IMC facility consisted of two ammonia facilities, a nitroparaffin (NP) facility, and a NP derivatives facility. An explosion occurred on May 1, 1991 in the NP facility, caused by a faulty compressor. During the post explosion renovation activities, an asbestos abatement firm was working on site due to the large amounts of asbestos (1332214) insulation which had been disturbed by the explosion. Recordsmore » indicated that several workers complained of ill effects and odors on June 17 and 19. The incidents were investigated but no chemical exposure explanation was found. Routine and complaint based industrial hygiene monitoring was primarily area monitoring and not substance specific. Of the 25 workers interviewed, 22 had symptoms they felt were related to their work at IMC. The symptoms included those of the upper respiratory tract, central nervous system, and gastrointestinal system. The most common included diarrhea, nausea, headache, dizziness, and cough, each experienced by significantly more than half the subjects. The symptoms could not be linked conclusively to any specific chemical release, job task, work location, or food or drink source.« less

Microstructure and Tensile Behavior of Laser Arc Hybrid Welded Dissimilar Al and Ti Alloys

PubMed Central

Gao, Ming; Chen, Cong; Gu, Yunze; Zeng, Xiaoyan

2014-01-01

Fiber laser-cold metal transfer arc hybrid welding was developed to welding-braze dissimilar Al and Ti alloys in butt configuration. Microstructure, interface properties, tensile behavior, and their relationships were investigated in detail. The results show the cross-weld tensile strength of the joints is up to 213 MPa, 95.5% of same Al weld. The optimal range of heat input for accepted joints was obtained as 83–98 J·mm−1. Within this range, the joint is stronger than 200 MPa and fractures in weld metal, or else, it becomes weaker and fractures at the intermetallic compounds (IMCs) layer. The IMCs layer of an accepted joint is usually thin and continuous, which is about 1μm-thick and only consists of TiAl2 due to fast solidification rate. However, the IMCs layer at the top corner of fusion zone/Ti substrate is easily thickened with increasing heat input. This thickened IMCs layer consists of a wide TiAl3 layer close to FZ and a thin TiAl2 layer close to Ti substrate. Furthermore, both bead shape formation and interface growth were discussed by laser-arc interaction and melt flow. Tensile behavior was summarized by interface properties. PMID:28788533

Preparation and pharmaceutical evaluation of new sustained-release capsule including starch-sponge matrix (SSM).

PubMed

Shibata, Nobuhito; Nishumura, Asako; Naruhashi, Kazumasa; Nakao, Yurie; Miura, Rieko

2010-05-01

The focus of current study was to demonstrate a new sustained-release capsule including starch-sponge matrix (SSM) and to investigate how the pharmaceutical properties of SSM affect the drug release or its pharmacokinetic properties. Three representative drugs (uranine [UN], indomethacin [IMC] and nifedipine [NFP]) with different physicochemical properties (LogP(ow): 0.10, 1.18 and 3.23, respectively) were selected as model drugs. Model drug was dispersioned in pastelike cornstarch (starch glue) after heating 2.0-3.0% cornstarch suspension with electromagnetic wave at 2450 MHz (700 W) for l min. Then the drug mixture was encapsulated into a gratin capsule by a syringe, and the SSM including drug was prepared by means of a freeze-dried method. Essentially, drug-free SSM has a porous and netlike structure, and the distribution aspect of model drugs in the SSM depends on physicochemical properties between cornstarch glue and drugs. UN with much lower lipophilicity exists in continues phase of SSM, and IMC or NFP with a moderate or a higher lipophilicity exist in continues phase or porous space of the SSM. In the in vitro dissolution study, the release rate of drug from the SSM was mainly dependent on the lipophilicities of drugs, showing a rank order of the release rate of UN>IMC>NFP. In addition, the in vitro release rate for each drug was well regulated by changing the initial concentration of cornstarch suspension. In vivo absorption studies after intraduodenal administration of SSM capsule including model drug revealed that the sustained-release effects also could be regulated by the initial concentration of starch suspension. Moreover, the sustained-release effect of SSM capsule was enhanced with an increase in the lipophilicity of drug, and local-residential and mucoadhesive properties of SSM in the intestine provided stable supply of drugs from the SSM. The SSM capsule we developed here shows promising results as an oral drug delivery system for sustained-release regulation or target specificity. 2009 Elsevier Masson SAS. All rights reserved.

A novel composite adaptive flap controller design by a high-efficient modified differential evolution identification approach.

PubMed

Li, Nailu; Mu, Anle; Yang, Xiyun; Magar, Kaman T; Liu, Chao

2018-05-01

The optimal tuning of adaptive flap controller can improve adaptive flap control performance on uncertain operating environments, but the optimization process is usually time-consuming and it is difficult to design proper optimal tuning strategy for the flap control system (FCS). To solve this problem, a novel adaptive flap controller is designed based on a high-efficient differential evolution (DE) identification technique and composite adaptive internal model control (CAIMC) strategy. The optimal tuning can be easily obtained by DE identified inverse of the FCS via CAIMC structure. To achieve fast tuning, a high-efficient modified adaptive DE algorithm is proposed with new mutant operator and varying range adaptive mechanism for the FCS identification. A tradeoff between optimized adaptive flap control and low computation cost is successfully achieved by proposed controller. Simulation results show the robustness of proposed method and its superiority to conventional adaptive IMC (AIMC) flap controller and the CAIMC flap controllers using other DE algorithms on various uncertain operating conditions. The high computation efficiency of proposed controller is also verified based on the computation time on those operating cases. Copyright © 2018 ISA. Published by Elsevier Ltd. All rights reserved.

An assessment of various side-stick controller/stability and control augmentation systems for night nap-of-Earth flight using piloted simulation

NASA Technical Reports Server (NTRS)

Landis, K. H.; Aiken, E. W.

1982-01-01

Several night nap-of-the-earth mission tasks were evaluated using a helmet-mounted display which provided a limited field-of-view image with superimposed flight control symbology. A wide range of stability and control augmentation designs was investigated. Variations in controller force-deflection characteristics and the number of axes controlled through an integrated side-stick controller were studied. In general, a small displacement controller is preferred over a stiffstick controller particularly for maneuvering flight. Higher levels of stability augmentation were required for IMC tasks to provide handling qualities comparable to those achieved for the same tasks conducted under simulated visual flight conditions.

Synthetic Vision Systems in GA Cockpit-Evaluation of Basic Maneuvers Performed by Low Time GA Pilots During Transition from VMC to IMC

NASA Technical Reports Server (NTRS)

Takallu, M. A.; Wong, D. T.; Uenking, M. D.

2002-01-01

An experimental investigation was conducted to study the effectiveness of modern flight displays in general aviation cockpits for mitigating Low Visibility Loss of Control and the Controlled Flight Into Terrain accidents. A total of 18 General Aviation (GA) pilots with private pilot, single engine land rating, with no additional instrument training beyond private pilot license requirements, were recruited to evaluate three different display concepts in a fixed-based flight simulator at the NASA Langley Research Center's General Aviation Work Station. Evaluation pilots were asked to continue flight from Visual Meteorological Conditions (VMC) into Instrument Meteorological Conditions (IMC) while performing a series of 4 basic precision maneuvers. During the experiment, relevant pilot/vehicle performance variables, pilot control inputs and physiological data were recorded. Human factors questionnaires and interviews were administered after each scenario. Qualitative and quantitative data have been analyzed and the results are presented here. Pilot performance deviations from the established target values (errors) were computed and compared with the FAA Practical Test Standards. Results of the quantitative data indicate that evaluation pilots committed substantially fewer errors when using the Synthetic Vision Systems (SVS) displays than when they were using conventional instruments. Results of the qualitative data indicate that evaluation pilots perceived themselves to have a much higher level of situation awareness while using the SVS display concept.

Supramolecular interactions of nonsteroidal anti-inflammatory drug in nanochannels of molecular containers: a spectroscopic, thermogravimetric and microscopic investigation.

PubMed

Maity, Banibrata; Chatterjee, Aninda; Ahmed, Sayeed Ashique; Seth, Debabrata

2014-11-10

Supramolecular host-guest complexation between the nonsteroidal anti-inflammatory drug indomethacin (IMC) and molecular containers were investigated. The weakly fluorescent drug molecule becomes highly fluorescent on complexation with different molecular containers, and time-resolved fluorescence emission spectroscopy reveals that the lifetime components of IMC significantly increase in the presence of molecular containers, compared with the lifetimes in neat water. The respective solid host-guest complexes were synthesised and characterised by Fourier transform infrared and (1) H nuclear magnetic resonance spectroscopic analysis. Microscopy techniques were used to analyse modifications of the surface morphology, owing to the formation of supramolecular complexes. The effect of the molecular container on the optical properties of IMC has also been investigated to determine the effect of nanochannels of different size and structure. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

From Strategic Communication to Simply Communicate: Redefining SC in Military Communication

DTIC Science & Technology

2011-04-10

departments and key publics. Contemporary government SC-practices were converted from private sector Integrated Marketing Communication (IMC) models... Integrated Marketing and Public Affairs for Recruiting. Position Paper for Commanding General, Marine Corps Recruiting Command, Quantico, VA: March 12...Corps. Strategic Communication Plan. Washington, DC: U.S. Marine Corps, July 2007. ,_ Devine, Christian. Integrated Marketing and Public Affairs for

Value of Forecaster in the Loop

DTIC Science & Technology

2014-09-01

forecast system IFR instrument flight rules IMC instrument meteorological conditions LAMP Localized Aviation Model Output Statistics Program METOC...obtaining valuable experience. Additional factors have impacted the Navy weather forecast process. There has been a the realignment of the meteorology...forecasts that are assessed, it may be a relatively small number that have direct impact on the decision-making process. Whether the value is minimal or

Use of computer decision support in an antimicrobial stewardship program (ASP).

PubMed

Evans, R S; Olson, J A; Stenehjem, E; Buckel, W R; Thorell, E A; Howe, S; Wu, X; Jones, P S; Lloyd, J F

2015-01-01

Document information needs, gaps within the current electronic applications and reports, and workflow interruptions requiring manual information searches that decreased the ability of our antimicrobial stewardship program (ASP) at Intermountain Healthcare (IH) to prospectively audit and provide feedback to clinicians to improve antimicrobial use. A framework was used to provide access to patient information contained in the electronic medical record, the enterprise-wide data warehouse, the data-driven alert file and the enterprise-wide encounter file to generate alerts and reports via pagers, emails and through the Centers for Diseases and Control's National Healthcare Surveillance Network. Four new applications were developed and used by ASPs at Intermountain Medical Center (IMC) and Primary Children's Hospital (PCH) based on the design and input from the pharmacists and infectious diseases physicians and the new Center for Diseases Control and Prevention/National Healthcare Safety Network (NHSN) antibiotic utilization specifications. Data from IMC and PCH now show a general decrease in the use of drugs initially targeted by the ASP at both facilities. To be effective, ASPs need an enormous amount of "timely" information. Members of the ASP at IH report these new applications help them improve antibiotic use by allowing efficient, timely review and effective prioritization of patients receiving antimicrobials in order to optimize patient care.

[Not Available].

PubMed

Reyna, Nadia; Moreno-Rojas, Rafael; Mendoza, Laura; Parra, Karla; Linares, Sergia; Reyna, Eduardo; Cámara-Martos, Fernando

2016-02-16

It has been studied the effect of three kinds of supplements (whey, casein and maltodextrin, as control) in the regulation of food intake and satiety of 60 overweight women. After 10 weeks, significant differences (p < 0.001) were found with regard to reduction of weight, IMC, % fat and waist circumference in the whey group against casein and control groups. A higher decrease of energy intake (-383 kcal/day) was also found in women who ate whey supplements, while in the casein and control group the decrease was only -144 and -70 kcal/day respectively. Finally, satiety effect was more efficiently promoted by whey against casein and maltodextrins.

A Dosimetric Comparison of Breast Radiotherapy Techniques to Treat Locoregional Lymph Nodes Including the Internal Mammary Chain.

PubMed

Ranger, A; Dunlop, A; Hutchinson, K; Convery, H; Maclennan, M K; Chantler, H; Twyman, N; Rose, C; McQuaid, D; Amos, R A; Griffin, C; deSouza, N M; Donovan, E; Harris, E; Coles, C E; Kirby, A

2018-06-01

Radiotherapy target volumes in early breast cancer treatment increasingly include the internal mammary chain (IMC). In order to maximise survival benefits of IMC radiotherapy, doses to the heart and lung should be minimised. This dosimetry study compared the ability of three-dimensional conformal radiotherapy, arc therapy and proton beam therapy (PBT) techniques with and without breath-hold to achieve target volume constraints while minimising dose to organs at risk (OARs). In 14 patients' datasets, seven IMC radiotherapy techniques were compared: wide tangent (WT) three-dimensional conformal radiotherapy, volumetric-modulated arc therapy (VMAT) and PBT, each in voluntary deep inspiratory breath-hold (vDIBH) and free breathing (FB), and tomotherapy in FB only. Target volume coverage and OAR doses were measured for each technique. These were compared using a one-way ANOVA with all pairwise comparisons tested using Bonferroni's multiple comparisons test, with adjusted P-values ≤ 0.05 indicating statistical significance. One hundred per cent of WT(vDIBH), 43% of WT(FB), 100% of VMAT(vDIBH), 86% of VMAT(FB), 100% of tomotherapy FB and 100% of PBT plans in vDIBH and FB passed all mandatory constraints. However, coverage of the IMC with 90% of the prescribed dose was significantly better than all other techniques using VMAT(vDIBH), PBT(vDIBH) and PBT(FB) (mean IMC coverage ± 1 standard deviation = 96.0% ± 4.3, 99.8% ± 0.3 and 99.0% ± 0.2, respectively). The mean heart dose was significantly reduced in vDIBH compared with FB for both the WT (P < 0.0001) and VMAT (P < 0.0001) techniques. There was no advantage in target volume coverage or OAR doses for PBT(vDIBH) compared with PBT(FB). Simple WT radiotherapy delivered in vDIBH achieves satisfactory coverage of the IMC while meeting heart and lung dose constraints. However, where higher isodose coverage is required, VMAT(vDIBH) is the optimal photon technique. The lowest OAR doses are achieved by PBT, in which the use of vDIBH does not improve dose statistics. Crown Copyright © 2018. Published by Elsevier Ltd. All rights reserved.

Effect of Isothermal Aging and Thermal Cycling on Interfacial IMC Growth and Fracture Behavior of SnAgCu/Cu Joints

NASA Astrophysics Data System (ADS)

Li, Xiaoyan; Li, Fenghui; Guo, Fu; Shi, Yaowu

2011-01-01

The growth behavior of interfacial intermetallic compounds (IMCs) of SnAgCu/Cu soldered joints was investigated during the reflow process, isothermal aging, and thermal cycling with a focus on the influence of these parameters on growth kinetics. The SnAgCu/Cu soldered joints were isothermally aged at 125°C, 150°C, and 175°C while the thermal cycling was performed within the temperature ranges from -25°C to 125°C and -40°C to 125°C. It was observed that a Cu6Sn5 layer formed, followed by rapid coarsening at the solder/Cu interface during reflowing. The grain size of the interfacial Cu6Sn5 was found to increase with aging time, and the morphology evolved from scallop-like to needle-like to rod-like and finally to particles. The rod-like Ag3Sn phase was formed on the solder side in front of the previously formed Cu6Sn5 layer. However, when subject to an increase of the aging time, the Cu3Sn phase was formed at the interface of the Cu6Sn5 layer and Cu substrate. The IMC growth rate increased with aging temperature for isothermally aged joints. During thermal cycling, the thickness of the IMC layer was found to increase with the number of thermal cycles, although the growth rate was slower than that for isothermal aging. The dwell time at the high-temperature end of the thermal cycles was found to significantly influence the growth rate of the IMCs. The growth of the IMCs, for both isothermal aging and thermal cycling, was found to be Arrhenius with aging temperature, and the corresponding diffusion factor and activation energy were obtained by data fitting. The tensile strength of the soldered joints decreased with increasing aging time. Consequently, the fracture site of the soldered joints migrated from the solder matrix to the interfacial Cu6Sn5 layer. Finally, the shear strength of the joints was found to decrease with both an increase in the number of thermal cycles and a decrease in the dwell temperature at the low end of the thermal cycle.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chan, Chi Ho; Levar, Caleb E.; Zacharoff, Lori

Metal reduction by members of the Geobacteraceae is encoded by multiple gene clusters, and the study of extracellular electron transfer often requires biofilm development on surfaces. Genetic tools that utilize polar antibiotic cassette insertions limit mutant construction and complementation. In addition, unstable plasmids create metabolic burdens that slow growth, and the presence of antibiotics such as kanamycin can interfere with the rate and extent of Geobacter biofilm growth. We report here genetic system improvements for the model anaerobic metal-reducing bacterium Geobacter sulfurreducens. A motile strain of G. sulfurreducens was constructed by precise removal of a transposon interrupting the fgrM flagellarmore » regulator gene using SacB/sucrose counterselection, and Fe(III) citrate reduction was eliminated by deletion of the gene encoding the inner membrane cytochrome imcH. We also show that RK2-based plasmids were maintained in G. sulfurreducens for over 15 generations in the absence of antibiotic selection in contrast to unstable pBBR1 plasmids. Therefore, we engineered a series of new RK2 vectors containing native constitutive Geobacter promoters, and modified one of these promoters for VanR-dependent induction by the small aromatic carboxylic acid vanillate. Inducible plasmids fully complemented Δ imcH mutants for Fe(III) reduction, Mn(IV) oxide reduction, and growth on poised electrodes. A real-time, high-throughput Fe(III) citrate reduction assay is described that can screen numerous G. sulfurreducens strain constructs simultaneously and shows the sensitivity of imcH expression by the vanillate system. Lastly, these tools will enable more sophisticated genetic studies in G. sulfurreducens without polar insertion effects or need for multiple antibiotics.« less

PERSONAL RECOLLECTIONS OF DR. HANS SELYE AND OF HIS INSTITUT DE MèDECINE ET DE CHIRURGIE EXPèRIMENTALES (IMCE).

PubMed

Salas-Prato, Milagros

2014-03-30

This article is a short personal recollection of Dr. Hans Selye (HS) and of his institute in order to show, first, why and how he influenced us; second, who he was as a person, human being, physician, scientist, professor, mentor; third, what was the structure and functioning of the Institut de Mèdecine et Chirurgie Expèrimentales (IMCE) and fourth, what HS' contributions and accomplishments were.

Improved Antitumor Activity of a Therapeutic Melanoma Vaccine through the Use of the Dual COX-2/5-LO Inhibitor Licofelone.

PubMed

Neumann, Silke; Shirley, Simon A; Kemp, Roslyn A; Hook, Sarah M

2016-01-01

Immune-suppressive cell populations impair antitumor immunity and can contribute to the failure of immune therapeutic approaches. We hypothesized that the non-steroidal anti-inflammatory drug licofelone, a dual cyclooxygenase-2/5-LO inhibitor, would improve therapeutic melanoma vaccination by reducing immune-suppressive cell populations. Therefore, licofelone was administered after tumor implantation, either alone or in combination with a peptide vaccine containing a long tyrosinase-related protein 2-peptide and the adjuvant α-galactosylceramide, all formulated into cationic liposomes. Mice immunized with the long-peptide vaccine and licofelone showed delayed tumor growth compared to mice given the vaccine alone. This protection was associated with a lower frequency of immature myeloid cells (IMCs) in the bone marrow (BM) and spleen of tumor-inoculated mice. When investigating the effect of licofelone on IMCs in vitro , we found that the prostaglandin E 2 -induced generation of IMCs was decreased in the presence of licofelone. Furthermore, pre-incubation of BM cells differentiated under IMC-inducing conditions with licofelone reduced the secretion of cytokines interleukin (IL)-10 and -6 upon lipopolysaccharides (LPS) stimulation as compared to untreated cells. Interestingly, licofelone increased IL-6 and IL-10 secretion when administered after the LPS stimulus, demonstrating an environment-dependent effect of licofelone. Our findings support the use of licofelone to reduce tumor-promoting cell populations.

NUEN-618 Class Project: Actually Implicit Monte Carlo

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vega, R. M.; Brunner, T. A.

2017-12-14

This research describes a new method for the solution of the thermal radiative transfer (TRT) equations that is implicit in time which will be called Actually Implicit Monte Carlo (AIMC). This section aims to introduce the TRT equations, as well as the current workhorse method which is known as Implicit Monte Carlo (IMC). As the name of the method proposed here indicates, IMC is a misnomer in that it is only semi-implicit, which will be shown in this section as well.

Exposure of the Heart in Breast Cancer Radiation Therapy: A Systematic Review of Heart Doses Published During 2003 to 2013

DOE Office of Scientific and Technical Information (OSTI.GOV)

Taylor, Carolyn W., E-mail: carolyn.taylor@ctsu.ox.ac.uk; Wang, Zhe; Macaulay, Elizabeth

Purpose: Breast cancer radiation therapy cures many women, but where the heart is exposed, it can cause heart disease. We report a systematic review of heart doses from breast cancer radiation therapy that were published during 2003 to 2013. Methods and Materials: Eligible studies were those reporting whole-heart dose (ie, dose averaged over the whole heart). Analyses considered the arithmetic mean of the whole-heart doses for the CT plans for each regimen in each study. We termed this “mean heart dose.” Results: In left-sided breast cancer, mean heart dose averaged over all 398 regimens reported in 149 studies from 28more » countries was 5.4 Gy (range, <0.1-28.6 Gy). In regimens that did not include the internal mammary chain (IMC), average mean heart dose was 4.2 Gy and varied with the target tissues irradiated. The lowest average mean heart doses were from tangential radiation therapy with either breathing control (1.3 Gy; range, 0.4-2.5 Gy) or treatment in the lateral decubitus position (1.2 Gy; range, 0.8-1.7 Gy), or from proton radiation therapy (0.5 Gy; range, 0.1-0.8 Gy). For intensity modulated radiation therapy mean heart dose was 5.6 Gy (range, <0.1-23.0 Gy). Where the IMC was irradiated, average mean heart dose was around 8 Gy and varied little according to which other targets were irradiated. Proton radiation therapy delivered the lowest average mean heart dose (2.6 Gy, range, 1.0-6.0 Gy), and tangential radiation therapy with a separate IMC field the highest (9.2 Gy, range, 1.9-21.0 Gy). In right-sided breast cancer, the average mean heart dose was 3.3 Gy based on 45 regimens in 23 studies. Conclusions: Recent estimates of typical heart doses from left breast cancer radiation therapy vary widely between studies, even for apparently similar regimens. Maneuvers to reduce heart dose in left tangential radiation therapy were successful. Proton radiation therapy delivered the lowest doses. Inclusion of the IMC doubled typical heart dose.« less

Green synthesis, characterization and some physico-chemical studies on a novel intermolecular compound; 4-nitro-o-phenylenediamine-N, N-dimethylaminobenzaldehyde system

NASA Astrophysics Data System (ADS)

Rai, U. S.; Singh, Manjeet; Rai, R. N.

2017-09-01

An inter-molecular compound (IMC) L1 was synthesized by taking 1:1 molar ratio of p-nitro-o-phenylenediamine (NOPDA) and N, N-dimethylaminobenzaldehyde (DMAB) via thermally initiated solid state reaction. It was characterized by X-ray diffraction, spectral and optical studies. The single crystal of the (L1) was grown from saturated solution of ethanol using slow evaporation technique at 29 °C. From the single crystal X-ray diffraction analysis, it can be inferred that it crystallizes in triclinic unit cell with P-1 space group (CCDC No 1422765). Absorption spectrum of IMC (L1) shows a band at 318 nm attributed to the intra-molecular charge-transfer (ICT) excited state absorption and the other band at 376 nm is due to n→π* transition. The IMC (L1) shows a strong fluorescence at 418 nm with a Stokes shift (≈100 nm) and quantum efficiency (0.22) upon excitation in methyl alcohol at 318 nm.

Intraosseous mucoepidermoid carcinoma: a review of the diagnostic imaging features of four jaw cases.

PubMed

Chan, K C; Pharoah, M; Lee, L; Weinreb, I; Perez-Ordonez, B

2013-01-01

The purpose of this case series is to present the common features of intraosseous mucoepidermoid carcinoma (IMC) of the jaws in plain film and CT imaging. Two oral and maxillofacial radiologists reviewed and characterized the common features of four biopsy-proven cases of IMC in the jaws in plain film and CT imaging obtained from the files of the Department of Oral Radiology, Faculty of Dentistry, University of Toronto, Toronto, Canada. The common features are a well-defined sclerotic periphery, the presence of internal amorphous sclerotic bone and numerous small loculations, lack of septae bordering many of the loculations, and expansion and perforation of the outer cortical plate with extension into surrounding soft tissue. Other characteristics include tooth displacement and root resorption. The four cases of IMC reviewed have common imaging characteristics. All cases share some diagnostic imaging features with other multilocular-appearing entities of the jaws. However, the presence of amorphous sclerotic bone and malignant characteristics can be useful in the differential diagnosis.

Nanostructured Layered Terbium Hydroxide Containing NASIDs: In Vitro Physicochemical and Biological Evaluations.

PubMed

Gu, Qing-Yang; Qiu, Xiao; Liu, Jing-Jing; Fu, Min; Chao, Jian-Ping; Ju, Rui-Jun; Li, Xue-Tao

2018-08-01

Diclofenac sodium (abrr. DS) and indomethacin (abrr. IMC) have been intercalated into the layered terbium hydroxide (LTbH) by anion exchange method. Chemical compositions, thermostability, morphology, luminescence property, release behaviors and cytotoxic effects have been investigated. The DS molecules may embed between layers with a bilayered arrangement and the IMC may correspond to a monolayered arrangement. The Tb3+ luminescence in DS-LTbH and IMC-LTbH composites were enhanced compared with LTbH precusor and the luminescence intensity increases with the deprotonation degree. Drug release was measured with HPLC, and LTbH showed sustained release behavior on both drugs. Further In Vitro evaluation were carried out on cancer cells. Cytotoxic effect of LTbH was observed with a sulforhodamine B colorimetric assay on a variety of cancer cell lines, which revealed that the LTbH showed little cytotoxic effect. Results indicate LTbH may offer a potential vehicle as an effective drug delivery system along with diagnostic integration.

Using hybrid implicit Monte Carlo diffusion to simulate gray radiation hydrodynamics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cleveland, Mathew A., E-mail: cleveland7@llnl.gov; Gentile, Nick

This work describes how to couple a hybrid Implicit Monte Carlo Diffusion (HIMCD) method with a Lagrangian hydrodynamics code to evaluate the coupled radiation hydrodynamics equations. This HIMCD method dynamically applies Implicit Monte Carlo Diffusion (IMD) [1] to regions of a problem that are opaque and diffusive while applying standard Implicit Monte Carlo (IMC) [2] to regions where the diffusion approximation is invalid. We show that this method significantly improves the computational efficiency as compared to a standard IMC/Hydrodynamics solver, when optically thick diffusive material is present, while maintaining accuracy. Two test cases are used to demonstrate the accuracy andmore » performance of HIMCD as compared to IMC and IMD. The first is the Lowrie semi-analytic diffusive shock [3]. The second is a simple test case where the source radiation streams through optically thin material and heats a thick diffusive region of material causing it to rapidly expand. We found that HIMCD proves to be accurate, robust, and computationally efficient for these test problems.« less

In situ visualization of metallurgical reactions in nanoscale Cu/Sn diffusion couples

NASA Astrophysics Data System (ADS)

Yin, Qiyue; Gao, Fan; Gu, Zhiyong; Stach, Eric A.; Zhou, Guangwen

2015-03-01

The Cu-Sn metallurgical soldering reaction in two-segmented Cu-Sn nanowires is studied by in situ transmission electron microscopy. By varying the relative lengths of Cu and Sn segments, we show that the metallurgical reaction results in a Cu-Sn solid solution for small Sn/Cu length ratio while Cu-Sn intermetallic compounds (IMCs) for larger Sn/Cu length ratios. Upon heating the nanowires to ~500 °C, two phase transformation pathways occur, η-Cu6Sn5 --> ε-Cu3Sn --> δ-Cu41Sn11 for nanowires with a long Cu segment and η-Cu6Sn5 --> ε-Cu3Sn --> γ-Cu3Sn with a short Cu segment. The evolution of Kirkendall voids in the nanowires demonstrates that Cu diffuses faster than Sn in IMCs. Void growth results in the nanowire breakage that shuts off the inter-diffusion of Cu and Sn and thus leads to changes in the phase transformation pathway in the IMCs.

Effect of Electromigration on the Type of Drop Failure of Sn-3.0Ag-0.5Cu Solder Joints in PBGA Packages

NASA Astrophysics Data System (ADS)

Huang, M. L.; Zhao, N.

2015-10-01

Board-level drop tests of plastic ball grid array (PBGA) packages were performed in accordance with the Joint Electron Devices Engineering Council standard to investigate the effect of electromigration (EM) on the drop reliability of Sn-3.0Ag-0.5Cu solder joints with two substrate surface finishes, organic solderability preservative (OSP) and electroless nickel electroless palladium immersion gold (ENEPIG). In the as-soldered state, drop failures occurred at the substrate sides only, with cracks propagating within the interfacial intermetallic compound (IMC) layer for OSP solder joints and along the IMC/Ni-P interface for ENEPIG solder joints. The drop lifetime of OSP solder joints was approximately twice that of ENEPIG joints. EM had an important effect on crack formation and drop lifetime of the PBGA solder joints. ENEPIG solder joints performed better in drop reliability tests after EM, that is, the drop lifetime of ENEPIG joints decreased by 43% whereas that of OSP solder joints decreased by 91%, compared with the as-soldered cases. The more serious polarity effect, i.e., excessive growth of the interfacial IMC at the anode, was responsible for the sharper decrease in drop lifetime. The different types of drop failure of PBGA solder joints before and after EM, including the position of initiation and the propagation path of cracks, are discussed on the basis of the growth behavior of interfacial IMC.

Effect of Interfacial Reaction on the Mechanical Performance of Steel to Aluminum Dissimilar Ultrasonic Spot Welds

NASA Astrophysics Data System (ADS)

Xu, Lei; Wang, Li; Chen, Ying-Chun; Robson, Joe D.; Prangnell, Philip B.

2016-01-01

The early stages of formation of intermetallic compounds (IMC) have been investigated in dissimilar aluminum to steel welds, manufactured by high power (2.5 kW) ultrasonic spot welding (USW). To better understand the influence of alloy composition, welds were produced between a low-carbon steel (DC04) and two different aluminum alloys (6111 and 7055). The joint strengths were measured in lap shear tests and the formation and growth behavior of IMCs at the weld interface were characterized by electron microscopy, for welding times from 0.2 to 2.4 seconds. With the material combinations studied, the η (Fe2Al5) intermetallic phase was found to form first, very rapidly in the initial stage of welding, with a discontinuous island morphology. Continuous layers of η and then θ (FeAl3) phase were subsequently seen to develop on extending the welding time to greater than 0.7 second. The IMC layer formed in the DC04-AA7055 combination grew thicker than for the DC04-AA6111 welds, despite both weld sets having near identical thermal histories. Zinc was also found to be dissolved in the IMC phases when welding with the AA7055 alloy. After post-weld aging of the aluminum alloy, fracture in the lap shear tests always occurred along the joint interface; however, the DC04-AA6111 welds had higher fracture energy than the DC04-AA7055 combination.

Impact of Thermal Aging on the Microstructure Evolution and Mechanical Properties of Lanthanum-Doped Tin-Silver-Copper Lead-Free Solders

NASA Astrophysics Data System (ADS)

Sadiq, Muhammad; Pesci, Raphaël; Cherkaoui, Mohammed

2013-03-01

An extensive study is made to analyze the impact of pure lanthanum on the microstructure and mechanical properties of Sn-Ag-Cu (SAC) alloys at high temperatures. Different compositions are tested; the temperature applied for the isothermal aging is 150°C, and aging times of 10 h, 25 h, 50 h, 100 h, and 200 h are studied. Optical microscopy with cross-polarized light is used to follow the grain size, which is refined from 8 mm to 1 mm for as-cast samples and is maintained during thermal aging. Intermetallic compounds (IMCs) present inside the bulk Sn matrix affect the mechanical properties of the SAC alloys. Due to high-temperature exposure, these IMCs grow and hence their impact on mechanical properties becomes more significant. This growth is followed by scanning electron microscopy, and energy-dispersive spectroscopy is used for elemental mapping of each phase. A significant refinement in the average size of IMCs of up to 40% is identified for the as-cast samples, and the coarsening rate of these IMCs is slowed by up to 70% with no change in the interparticle spacing. Yield stress and tensile strength are determined through tensile testing at 20°C for as-cast samples and after thermal aging at 150°C for 100 h and 200 h. Both yield stress and tensile strength are increased by up to 20% by minute lanthanum doping.

Effects of Insert Metal Type on Interfacial Microstructure During Dissimilar Joining of TiAl Alloy to SCM440 by Friction Welding

NASA Astrophysics Data System (ADS)

Park, Jong-Moon; Kim, Ki-Young; Kim, Kyoung-Kyun; Ito, Kazuhiro; Takahashi, Makoto; Oh, Myung-Hoon

2018-05-01

Although the welding zone of direct bonding between a TiAl alloy and SCM440 can be obtained by friction welding, martensitic transformation and the formation of intermetallic compounds (IMCs) and cracks result in a lower tensile strength of the joints relative to those of other welding techniques. Insert metals were used as a buffer layer to relieve stress while increasing the bond strength. In this study, the microstructure and mechanical properties on welded joints of a TiAl alloy and SCM440 with various insert metals, were investigated. The TiAl/Cu/SCM440 and TiAl/Ni/SCM440 joints were fabricated using a servo-motor-type friction welding machine. As a result, it was confirmed that the formation of a welding flash was dependent on the insert metal type, and the strength of the base metal. At the TiAl/Cu/SCM440 interface, the formation of IMCs CuTiAl and Cu2TiAl was observed at TiAl/Cu, while no IMC formation was observed at Cu/SCM440. On the other hand, at the TiAl/Ni/SCM440 interface, several IMCs with more than 100 μm thickness were found, and roughly two compositions, viz., Ti2NiAl3 and TiNi2Al, were observed at the TiAl/Ni interface. At the Ni/SCM440 interface, 10 μm-thick FeNi and others were found.

The Inner Membrane Complex Sub-compartment Proteins Critical for Replication of the Apicomplexan Parasite Toxoplasma gondii Adopt a Pleckstrin Homology Fold*

PubMed Central

Tonkin, Michelle L.; Beck, Josh R.; Bradley, Peter J.; Boulanger, Martin J.

2014-01-01

Toxoplasma gondii, an apicomplexan parasite prevalent in developed nations, infects up to one-third of the human population. The success of this parasite depends on several unique structures including an inner membrane complex (IMC) that lines the interior of the plasma membrane and contains proteins important for gliding motility and replication. Of these proteins, the IMC sub-compartment proteins (ISPs) have recently been shown to play a role in asexual T. gondii daughter cell formation, yet the mechanism is unknown. Complicating mechanistic characterization of the ISPs is a lack of sequence identity with proteins of known structure or function. In support of elucidating the function of ISPs, we first determined the crystal structures of representative members TgISP1 and TgISP3 to a resolution of 2.10 and 2.32 Å, respectively. Structural analysis revealed that both ISPs adopt a pleckstrin homology fold often associated with phospholipid binding or protein-protein interactions. Substitution of basic for hydrophobic residues in the region that overlays with phospholipid binding in related pleckstrin homology domains, however, suggests that ISPs do not retain phospholipid binding activity. Consistent with this observation, biochemical assays revealed no phospholipid binding activity. Interestingly, mapping of conserved surface residues combined with crystal packing analysis indicates that TgISPs have functionally repurposed the phospholipid-binding site likely to coordinate protein partners. Recruitment of larger protein complexes may also be aided through avidity-enhanced interactions resulting from multimerization of the ISPs. Overall, we propose a model where TgISPs recruit protein partners to the IMC to ensure correct progression of daughter cell formation. PMID:24675080

Scarless genome editing and stable inducible expression vectors for Geobacter sulfurreducens

DOE PAGES

Chan, Chi Ho; Levar, Caleb E.; Zacharoff, Lori; ...

2015-08-07

Metal reduction by members of the Geobacteraceae is encoded by multiple gene clusters, and the study of extracellular electron transfer often requires biofilm development on surfaces. Genetic tools that utilize polar antibiotic cassette insertions limit mutant construction and complementation. In addition, unstable plasmids create metabolic burdens that slow growth, and the presence of antibiotics such as kanamycin can interfere with the rate and extent of Geobacter biofilm growth. We report here genetic system improvements for the model anaerobic metal-reducing bacterium Geobacter sulfurreducens. A motile strain of G. sulfurreducens was constructed by precise removal of a transposon interrupting the fgrM flagellarmore » regulator gene using SacB/sucrose counterselection, and Fe(III) citrate reduction was eliminated by deletion of the gene encoding the inner membrane cytochrome imcH. We also show that RK2-based plasmids were maintained in G. sulfurreducens for over 15 generations in the absence of antibiotic selection in contrast to unstable pBBR1 plasmids. Therefore, we engineered a series of new RK2 vectors containing native constitutive Geobacter promoters, and modified one of these promoters for VanR-dependent induction by the small aromatic carboxylic acid vanillate. Inducible plasmids fully complemented Δ imcH mutants for Fe(III) reduction, Mn(IV) oxide reduction, and growth on poised electrodes. A real-time, high-throughput Fe(III) citrate reduction assay is described that can screen numerous G. sulfurreducens strain constructs simultaneously and shows the sensitivity of imcH expression by the vanillate system. Lastly, these tools will enable more sophisticated genetic studies in G. sulfurreducens without polar insertion effects or need for multiple antibiotics.« less

Compendium of Operations Research and Economic Analysis Studies.

DTIC Science & Technology

1987-09-01

robots , conveyor belts, etc. are modeled as well. Simulation results indicate that the IMC design for receiving and packing is feasible from a system...Logistics Services Center (DLSC) operation. Benef its were evaluated through analysis of a sample of data from recipients as to the use being made of...Modernization of the DPSC Manufacturing Facility (August 1969) This study explored the feasibility of a proposal to air condition and modernize the

Two-degree-of-freedom fractional order-PID controllers design for fractional order processes with dead-time.

PubMed

Li, Mingjie; Zhou, Ping; Zhao, Zhicheng; Zhang, Jinggang

2016-03-01

Recently, fractional order (FO) processes with dead-time have attracted more and more attention of many researchers in control field, but FO-PID controllers design techniques available for the FO processes with dead-time suffer from lack of direct systematic approaches. In this paper, a simple design and parameters tuning approach of two-degree-of-freedom (2-DOF) FO-PID controller based on internal model control (IMC) is proposed for FO processes with dead-time, conventional one-degree-of-freedom control exhibited the shortcoming of coupling of robustness and dynamic response performance. 2-DOF control can overcome the above weakness which means it realizes decoupling of robustness and dynamic performance from each other. The adjustable parameter η2 of FO-PID controller is directly related to the robustness of closed-loop system, and the analytical expression is given between the maximum sensitivity specification Ms and parameters η2. In addition, according to the dynamic performance requirement of the practical system, the parameters η1 can also be selected easily. By approximating the dead-time term of the process model with the first-order Padé or Taylor series, the expressions for 2-DOF FO-PID controller parameters are derived for three classes of FO processes with dead-time. Moreover, compared with other methods, the proposed method is simple and easy to implement. Finally, the simulation results are given to illustrate the effectiveness of this method. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

Dependence of Coronary 3-Dimensional Dose Maps on Coronary Topologies and Beam Set in Breast Radiation Therapy: A Study Based on CT Angiographies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Moignier, Alexandra, E-mail: alexandra.moignier@gmail.com; Broggio, David; Derreumaux, Sylvie

2014-05-01

Purpose: In left-side breast radiation therapy (RT), doses to the left main (LM) and left anterior descending (LAD) coronary arteries are usually assessed after delineation by prior anatomic knowledge on the treatment planning computed tomography (CT) scan. In this study, dose sensitivity due to interindividual coronary topology variation was assessed, and hot spots were located. Methods and Materials: Twenty-two detailed heart models, created from heart computed tomography angiographies, were fitted into a single representative female thorax. Two breast RT protocols were then simulated into a treatment planning system: the first protocol comprised tangential and tumoral bed beams (TGs{sub T}B) atmore » 50 + 16 Gy, the second protocol added internal mammary chain beams at 50 Gy to TGs{sub T}B (TGs{sub T}B{sub I}MC). For the heart, the LAD, and the LM, several dose indicators were calculated: dose-volume histograms, mean dose (D{sub mean}), minimal dose received by the most irradiated 2% of the volume (D{sub 2%}), and 3-dimensional (3D) dose maps. Variations of these indicators with anatomies were studied. Results: For the LM, the intermodel dispersion of D{sub mean} and D{sub 2%} was 10% and 11%, respectively, with TGs{sub T}B and 40% and 80%, respectively, with TGs{sub T}B{sub I}MC. For the LAD, these dispersions were 19% (D{sub mean}) and 49% (D{sub 2%}) with TGs{sub T}B and 35% (D{sub mean}) and 76% (D{sub 2%}) with TGs{sub T}B{sub I}MC. The 3D dose maps revealed that the internal mammary chain beams induced hot spots between 20 and 30 Gy on the LM and the proximal LAD for some coronary topologies. Without IMC beams, hot spots between 5 and 26 Gy are located on the middle and distal LAD. Conclusions: Coronary dose distributions with hot spot location and dose level can change significantly depending on coronary topology, as highlighted by 3D coronary dose maps. In clinical practice, coronary imaging may be required for a relevant coronary dose assessment, especially in cases of internal mammary chain irradiation.« less

Decoupling control of vehicle chassis system based on neural network inverse system

NASA Astrophysics Data System (ADS)

Wang, Chunyan; Zhao, Wanzhong; Luan, Zhongkai; Gao, Qi; Deng, Ke

2018-06-01

Steering and suspension are two important subsystems affecting the handling stability and riding comfort of the chassis system. In order to avoid the interference and coupling of the control channels between active front steering (AFS) and active suspension subsystems (ASS), this paper presents a composite decoupling control method, which consists of a neural network inverse system and a robust controller. The neural network inverse system is composed of a static neural network with several integrators and state feedback of the original chassis system to approach the inverse system of the nonlinear systems. The existence of the inverse system for the chassis system is proved by the reversibility derivation of Interactor algorithm. The robust controller is based on the internal model control (IMC), which is designed to improve the robustness and anti-interference of the decoupled system by adding a pre-compensation controller to the pseudo linear system. The results of the simulation and vehicle test show that the proposed decoupling controller has excellent decoupling performance, which can transform the multivariable system into a number of single input and single output systems, and eliminate the mutual influence and interference. Furthermore, it has satisfactory tracking capability and robust performance, which can improve the comprehensive performance of the chassis system.

Outcomes after liquid nitrogen spray cryotherapy in Barrett's esophagus-associated high-grade dysplasia and intramucosal adenocarcinoma: 5-year follow-up.

PubMed

Ramay, Fariha H; Cui, Qingping; Greenwald, Bruce D

2017-10-01

Liquid nitrogen spray cryotherapy (LNSCT) has been shown to be a safe, well-tolerated, and effective therapy for Barrett's esophagus (BE)-associated high-grade dysplasia (BE-HGD) and intramucosal adenocarcinoma (IMC). Long-term follow-up is lacking. The aim of this study was to assess the efficacy, durability, and rate of neoplastic progression after LNSCT in BE-HGD/IMC at 3 and 5 years. In this single-center, retrospective study drawn from a prospective database, patients with BE-HGD/IMC of any length treated with LNSCT were followed with surveillance endoscopy with biopsy for 3 to 5 years. Patients with IMC completely removed by endoscopic resection were included. Outcome measures included complete eradication of HGD (CE-HGD), dysplasia, and intestinal metaplasia; incidence rates; durability of response; location of recurrent intestinal metaplasia and dysplasia; and rate of disease progression. A total of 50 and 40 patients were included in 3-year and 5-year analyses. Initial CE-HGD, dysplasia, and intestinal metaplasia achieved in 98%, 90%, and 60%, respectively. Overall CE-HGD, dysplasia, and intestinal metaplasia at 3 years were 96% (48/50), 94% (47/50), and 82% (41/50), and at 5 years were 93% (37/40), 88% (35/40), and 75% (30/40). Incidence rates of recurrent intestinal metaplasia, dysplasia, and HGD/esophageal adenocarcinoma per person-year of follow-up after initial complete eradication of intestinal metaplasia (CE-IM) were 12.2%, 4.0%, and 1.4% per person-year for the 5-year cohort. Most recurrences were found immediately below the neosquamocolumnar junction. Two of 7 HGD recurrences occurred later than 4 years after initial eradication, and 2 patients (4%) progressed to adenocarcinoma despite treatment. In patients with BE-HGD/IMC, LNSCT is effective in eliminating dysplasia and intestinal metaplasia. Progression to adenocarcinoma was uncommon, and recurrence of dysplasia was successfully treated in most cases. Long-term surveillance is necessary to detect late recurrence of dysplasia. Copyright © 2017 American Society for Gastrointestinal Endoscopy. Published by Elsevier Inc. All rights reserved.

Early treatment of imported falciparum malaria in the intermediate and intensive care unit setting: an 8-year single-center retrospective study.

PubMed

Schwake, Lukas; Streit, Judith Pamela; Edler, Lutz; Encke, Jens; Stremmel, Wolfgang; Junghanss, Thomas

2008-01-01

Imported falciparum malaria is characterized by a broad spectrum of potentially life-threatening complications that may arise even after initiation of appropriate antimalarial drug therapy. Hence, at Heidelberg University Hospital, all patients with newly diagnosed falciparum malaria are initially treated in the intermediate care unit (IMC) or intensive care unit (ICU). The present study was undertaken to evaluate critically the benefit of this strategy, which includes daily consultation with senior specialists in tropical medicine. We conducted a retrospective cohort study at the 14-bed combined IMC/ICU of a 1,685-bed university hospital. A cohort of 122 patients with imported falciparum malaria admitted from 1 January 1996 to 31 December 2003 was included. Thirty-four patients (27.9%) developed complications, defined according to the current World Health Organization classification. Most patients (80.3%) studied did not take the recommended chemoprophylaxis against malaria. The majority of patients (89.3% [n = 109]) could be adequately treated in the IMC. Life-threatening complications requiring ICU support occurred in 13 patients (10.7%). All complications were successfully managed. Fifty-five patients (45.1%) fulfilling recently published criteria for outpatient treatment had an excellent therapeutic response and did not require ICU support. This retrospective evaluation demonstrated favourable therapeutic results in hospitalized patients with imported falciparum malaria. Both initial treatment in the medical IMC/ICU and close collaboration between intensivists and specialists in tropical medicine may improve disease outcome among affected patients. Prospective studies are needed to confirm these preliminary findings.

Encapsulation in Polymeric Microparticles Improves Daptomycin Activity Against Mature Staphylococci Biofilms-a Thermal and Imaging Study.

PubMed

Santos Ferreira, Inês; Kikhney, Judith; Kursawe, Laura; Kasper, Stefanie; Gonçalves, Lídia M D; Trampuz, Andrej; Moter, Annette; Bettencourt, Ana Francisca; Almeida, António J

2018-05-01

Eradication of Gram-positive biofilms is a critical aspect in implant-associated infection treatment. Although antibiotic-containing particulate carriers may be a promising strategy for overcoming biofilm tolerance, the assessment of their interaction with biofilms has not been fully explored. In the present work, the antibiofilm activity of daptomycin- and vancomycin-loaded poly(methyl methacrylate) (PMMA) and PMMA-Eudragit RL 100 (EUD) microparticles against methicillin-resistant Staphylococcus aureus (MRSA) and polysaccharide intercellular adhesin-positive S. epidermidis biofilms was investigated using isothermal microcalorimetry (IMC) and fluorescence in situ hybridization (FISH). The minimal biofilm inhibitory concentrations (MBIC) of MRSA biofilms, as determined by IMC, were 5 and 20 mg/mL for daptomycin- and vancomycin-loaded PMMA microparticles, respectively. S. epidermidis biofilms were less susceptible, with a MBIC of 20 mg/mL for daptomycin-loaded PMMA microparticles. Vancomycin-loaded microparticles were ineffective. Adding EUD to the formulation caused a 4- and 16-fold reduction of the MBIC values of daptomycin-loaded microparticles for S. aureus and S. epidermidis, respectively. FISH corroborated the IMC results and provided additional insights on the antibiofilm effect of these particles. According to microscopic analysis, only daptomycin-loaded PMMA-EUD microparticles were causing a pronounced reduction in biofilm mass for both strains. Taken together, although IMC indicated that a biofilm inhibition was achieved, microscopy showed that the biofilm was not eradicated and still contained FISH-positive, presumably viable bacteria, thus indicating that combining the two techniques is essential to fully assess the effect of microparticles on staphylococcal biofilms.

Reliability and failure modes of narrow implant systems.

PubMed

Hirata, Ronaldo; Bonfante, Estevam A; Anchieta, Rodolfo B; Machado, Lucas S; Freitas, Gileade; Fardin, Vinicius P; Tovar, Nick; Coelho, Paulo G

2016-09-01

Narrow implants are indicated in areas of limited bone width or when grafting is nonviable. However, the reduction of implant diameter may compromise their performance. This study evaluated the reliability of several narrow implant systems under fatigue, after restored with single-unit crowns. Narrow implant systems were divided (n = 18 each), as follows: Astra (ASC); BioHorizons (BSC); Straumann Roxolid (SNC), Intra-Lock (IMC), and Intra-Lock one-piece abutment (ILO). Maxillary central incisor crowns were cemented and subjected to step-stress accelerated life testing in water. Use level probability Weibull curves and reliability for a mission of 100,000 cycles at 130- and 180-N loads (90 % two-sided confidence intervals) were calculated. Scanning electron microscopy was used for fractography. Reliability for 100,000 cycles at 130 N was ∼99 % in group ASC, ∼99 % in BSC, ∼96 % in SNC, ∼99 % in IMC, and ∼100 % in ILO. At 180 N, reliability of ∼34 % resulted for the ASC group, ∼91 % for BSC, ∼53 % for SNC, ∼70 % for IMC, and ∼99 % for ILO. Abutment screw fracture was the main failure mode for all groups. Reliability was not different between systems for 100,000 cycles at the 130-N load. A significant decrease was observed at the 180-N load for ASC, SNC, and IMC, whereas it was maintained for BSC and ILO. The investigated narrow implants presented mechanical performance under fatigue that suggests their safe use as single crowns in the anterior region.

Development of a double beam process for joining aluminum and steel

NASA Astrophysics Data System (ADS)

Frank, Sascha

2014-02-01

Multi-material structures pose an attractive option for overcoming some of the central challenges in lightweight design. An exceptionally high potential for creating cost-effective lightweight solutions is attributed to the combination of steel and aluminum. However, these materials are also particularly difficult to join due to their tendency to form intermetallic compounds (IMCs). The growth of these compounds is facilitated by high temperatures and long process times. Due to their high brittleness, IMCs can severely weaken a joint. Thus, it is only possible to create durable steel-aluminum joints when the formation of IMCs can be limited to a non-critical level. To meet this goal, a new joining method has been designed. The method is based on the combination of a continuous wave (pw) and a pulsed laser (pw) source. Laser beams from both sources are superimposed in a common process zone. This makes it possible to apply the advantages of laser brazing to mixed-metal joints without requiring the use of chemical fluxes. The double beam technology was first tested in bead-on-plate experiments using different filler wire materials. Based on the results of these tests, a process for joining steel and aluminum in a double-flanged configuration is now being developed. The double flanged seams are joined using zinc- or aluminum-based filler wires. Microsections of selected seams show that it is possible to achieve good base material wetting while limiting the growth of IMCs to acceptable measures. In addition, the results of tensile tests show that high joint strengths can be achieved.

Synthesis and studies on structural, optical and nonlinear optical properties of novel organic inter-molecular compounds: 4-chloro-3-nitroaniline-3-hydroxy benzaldehyde and urea-4-dimethylaminopyridine

NASA Astrophysics Data System (ADS)

Pandey, Priyanka; Rai, R. N.

2018-05-01

Two novel organic inter-molecular compounds (IMCs), (3-(4-chloro-3-nitrophenylimino) methyl) phenol) (CNMP) and urea ̶ 4-dimethylaminopyridine complex (UDMAP), have been synthesized by solid state reaction. These two IMCs were identified by phase diagram study of CNA-HB and U-DMAP systems. The single crystals of newly obtained IMCs were grown by slow solvent evaporation technique at room temperature. Both the IMCs were further studied for their thermal, spectral, single crystal XRD for their atomic packing in molecule, crystallinity, optical and nonlinear optical behaviour. In both the cases, melting point of inter-molecular compounds was found to be higher than that of their parent components, CNMP was found to be thermally stable up to 158 °C while UDMAP was stable up to 144 °C, which indicate their extra stability than their parents. The single crystal XRD studies confirmed that CNMP has crystallized in orthorhombic unit cell with non-centrosymmetric space group P212121 while UDMAP has crystallized in monoclinic unit cell with centrosymmetric space group C2/c. The absorption spectrum of CNMP was found to be in between the absorption of parents, while broadening of peak and red shift was observed in UDMAP as compared to the parents. Second order nonlinear optical property of CNMP and UDMAP was studied using Kurtz Perry powder technique and intense green light emission was observed with CNMP on excitation with 1064 nm of Nd:YAG laser while no emission was observed with UDMAP.

Effect of Ni-P Plating Temperature on Growth of Interfacial Intermetallic Compound in Electroless Nickel Immersion Gold/Sn-Ag-Cu Solder Joints

NASA Astrophysics Data System (ADS)

Seo, Wonil; Kim, Kyoung-Ho; Kim, Young-Ho; Yoo, Sehoon

2018-01-01

The growth of interfacial intermetallic compound and the brittle fracture behavior of Sn-3.0Ag-0.5-Cu solder (SAC305) joints on electroless nickel immersion gold (ENIG) surface finish have been investigated using Ni-P plating solution at temperatures from 75°C to 85°C and fixed pH of 4.5. SAC305 solder balls with diameter of 450 μm were mounted on the prepared ENIG-finished Cu pads and reflowed with peak temperature of 250°C. The interfacial intermetallic compound (IMC) thickness after reflow decreased with increasing Ni-P plating temperature. After 800 h of thermal aging, the IMC thickness of the sample prepared at 85°C was higher than for that prepared at 75°C. Scanning electron microscopy of the Ni-P surface after removal of the Au layer revealed a nodular structure on the Ni-P surface. The nodule size of the Ni-P decreased with increasing Ni-P plating temperature. The Cu content near the IMC layer increased to 0.6 wt.%, higher than the original Cu content of 0.5 wt.%, indicating that Cu diffused from the Cu pad to the solder ball through the Ni-P layer at a rate depending on the nodule size. The sample prepared at 75°C with thicker interfacial IMC showed greater high-speed shear strength than the sample prepared at 85°C. Brittle fracture increased with decreasing Ni-P plating temperature.

Ron in Breast Development and Cancer

DTIC Science & Technology

2006-10-01

forms of chemotherapy and radiation . Testing the efficacy of IMC-41A10 in other subcutaneous as well as orthotopic tumor xenograft models will also be...contained a number of mitotic figures, an increased nuclear to cytoplasmic ratio and a high degree of pleomorphism that resembles what is observed in...The tumors that developed as a result of Ron overexpression had a high degree of pleomorphism and an increase in the nuclear to cytoplasmic ratio

High-Frequency Intermuscular Coherence between Arm Muscles during Robot-Mediated Motor Adaptation

PubMed Central

Pizzamiglio, Sara; De Lillo, Martina; Naeem, Usman; Abdalla, Hassan; Turner, Duncan L.

2017-01-01

Adaptation of arm reaching in a novel force field involves co-contraction of upper limb muscles, but it is not known how the co-ordination of multiple muscle activation is orchestrated. We have used intermuscular coherence (IMC) to test whether a coherent intermuscular coupling between muscle pairs is responsible for novel patterns of activation during adaptation of reaching in a force field. Subjects (N = 16) performed reaching trials during a null force field, then during a velocity-dependent force field and then again during a null force field. Reaching trajectory error increased during early adaptation to the force-field and subsequently decreased during later adaptation. Co-contraction in the majority of all possible muscle pairs also increased during early adaptation and decreased during later adaptation. In contrast, IMC increased during later adaptation and only in a subset of muscle pairs. IMC consistently occurred in frequencies between ~40–100 Hz and during the period of arm movement, suggesting that a coherent intermuscular coupling between those muscles contributing to adaptation enable a reduction in wasteful co-contraction and energetic cost during reaching. PMID:28119620

Comparative Reliability Studies and Analysis of Au, Pd-Coated Cu and Pd-Doped Cu Wire in Microelectronics Packaging

PubMed Central

Chong Leong, Gan; Uda, Hashim

2013-01-01

This paper compares and discusses the wearout reliability and analysis of Gold (Au), Palladium (Pd) coated Cu and Pd-doped Cu wires used in fineline Ball Grid Array (BGA) package. Intermetallic compound (IMC) thickness measurement has been carried out to estimate the coefficient of diffusion (Do) under various aging conditions of different bonding wires. Wire pull and ball bond shear strengths have been analyzed and we found smaller variation in Pd-doped Cu wire compared to Au and Pd-doped Cu wire. Au bonds were identified to have faster IMC formation, compared to slower IMC growth of Cu. The obtained weibull slope, β of three bonding wires are greater than 1.0 and belong to wearout reliability data point. Pd-doped Cu wire exhibits larger time-to-failure and cycles-to-failure in both wearout reliability tests in Highly Accelerated Temperature and Humidity (HAST) and Temperature Cycling (TC) tests. This proves Pd-doped Cu wire has a greater potential and higher reliability margin compared to Au and Pd-coated Cu wires. PMID:24244344

Incorporation of Interfacial Intermetallic Morphology in Fracture Mechanism Map for Sn-Ag-Cu Solder Joints

NASA Astrophysics Data System (ADS)

Huang, Z.; Kumar, P.; Dutta, I.; Sidhu, R.; Renavikar, M.; Mahajan, R.

2014-01-01

A fracture mechanism map (FMM) is a powerful tool which correlates the fracture behavior of a material to its microstructural characteristics in an explicit and convenient way. In the FMM for solder joints, an effective thickness of the interfacial intermetallic compound (IMC) layer ( t eff) and the solder yield strength ( σ ys,eff) are used as abscissa and ordinate axes, respectively, as these two predominantly affect the fracture behavior of solder joints. Earlier, a definition of t eff, based on the uniform thickness of IMC ( t u) and the average height of the IMC scallops ( t s), was proposed and shown to aptly explain the fracture behavior of solder joints on Cu. This paper presents a more general definition of t eff that is more widely applicable to a range of metallizations, including Cu and electroless nickel immersion gold (ENIG). Using this new definition of t eff, mode I FMM for SAC387/Cu joints has been updated and its validity was confirmed. A preliminary FMM for SAC387/Cu joints with ENIG metallization is also presented.

[Not Available].

PubMed

Curilem Gatica, Cristian; Almagià Flores, Atilio; Rodríguez Rodríguez, Fernando; Yuing Farias, Tuillang; Berral de la Rosa, Francisco; Martínez Salazar, Cristian; Jorquera Aguilera, Carlos; Bahamondes Ávila, Carlos; Soís Urra, Patricio; Cristi Montero, Carlos; Bruneau Chávez, José; Pinto Aguilante, Juan; Niedmann Brunet, Luis

2016-06-30

El índice de masa corporal (IMC) otorga uno de los índices más usados para determinar el estado nutricional de la población a nivel mundial, donde a pesar de existir recomendaciones claras y definidas para su interpretación como el sexo, edad, raza, entre otros, normalmente se estandariza su clasificación, independiente de las variables, aumentando el error en el resultado y en la clasificación del estado nutricional.El uso de la composición corporal a través de la antropometría entrega mayor información que el IMC, siendo la masa grasa y la masa muscular los principales resultados útiles.Este artículo presenta una revisión de las ecuaciones existentes y propone aquellas más simples y con menor error de estimación para ser usadas como una herramienta que reemplace o complemente al IMC, favoreciendo una mejor comprensión e interpretación del estado nutricional y nivelde actividad física en niños y adolescentes.

IMCS reflight certification requirements and design specifications

NASA Technical Reports Server (NTRS)

1984-01-01

The requirements for reflight certification are established. Software requirements encompass the software programs that are resident in the PCC, DEP, PDSS, EC, or any related GSE. A design approach for the reflight software packages is recommended. These designs will be of sufficient detail to permit the implementation of reflight software. The PDSS/IMC Reflight Certification system provides the tools and mechanisms for the user to perform the reflight certification test procedures, test data capture, test data display, and test data analysis. The system as defined will be structured to permit maximum automation of reflight certification procedures and test data analysis.

Seven years of radionuclide laboratory at IMC - important achievements.

PubMed

Hrubý, M; Kučka, J; Pánek, J; Štěpánek, P

2016-10-20

For many important research topics in polymer science the use of radionuclides brings significant benefits concerning nanotechnology, polymer drug delivery systems, tissue engineering etc. This contribution describes important achievements of the radionuclide laboratory at Institute of Macromolecular Chemistry of the Academy of Sciences of the Czech Republic (IMC) in the area of polymers for biomedical applications. Particular emphasis will be given to water-soluble polymer carriers of radionuclides, thermoresponsive polymer radionuclide carriers, thermoresponsive polymers for local brachytherapy, polymer scaffolds modified with (radiolabeled) peptides and polymer copper chelators for the therapy of Wilson´s disease.

Evaluation of Electroplated Co-P Film as Diffusion Barrier Between In-48Sn Solder and SiC-Dispersed Bi2Te3 Thermoelectric Material

NASA Astrophysics Data System (ADS)

Li, Siyang; Yang, Donghua; Tan, Qing; Li, Liangliang

2015-06-01

The diffusion barrier property of Co-P film as a buffer layer between SiC-dispersed Bi2Te3 bulk material and In-48Sn solder was investigated. A Co-P film with thickness of ~6 µm was electroplated on SiC-dispersed Bi2Te3 substrate, joined with In-48Sn solder by a reflow process, and annealed at 100°C for up to 625 h. The formation and growth kinetics of intermetallic compounds (IMCs) at the interface between the In-48Sn and substrate were studied using transmission electron microscopy and scanning electron microscopy with energy-dispersive x-ray spectroscopy. The results showed that crystalline Co(In,Sn)3 formed as an irregular layer adjacent to the solder side at the solder/Co-P interface due to diffusion of Co towards the solder, and a small amount of amorphous Co45P13In12Sn30 appeared at the Co-P side because of diffusion of In and Sn into Co-P. The growth of Co(In,Sn)3 and Co45P13In12Sn30 during solid-state aging was slow, being controlled by interfacial reaction and diffusion, respectively. For comparison, In-48Sn/Bi2Te3-SiC joints were prepared and the IMCs in the joints analyzed. Without a diffusion barrier, In penetrated rapidly into the substrate, which led to the formation of amorphous In x Bi y phase in crystalline In4Te3 matrix. These IMCs grew quickly with prolongation of the annealing time, and their growth was governed by volume diffusion of elements. The experimental data demonstrate that electroplated Co-P film is an effective diffusion barrier for use in Bi2Te3-based thermoelectric modules.

United States Air Force Summer Research Program 1991. Summer Faculty Research Program (SFRP) Reports. Volume 5B. Wright Laboratory

DTIC Science & Technology

1992-01-09

interfaces of intermetallic-matrix composites (for example, with Ti-Il wt.% Al-14 wt.% Nb and other titanium aluminides combined with various fibers... titanium aluminide intermetallics should be processed, tested and characterized by TEM. These intermetallic-matrix composites (IMC) are important for...these titanium aluminides have a greater CTE mismatch and have been modelled to undergo significant plastic deformation as a result of thermal processing

Commercial formulations of Bacillus thuringiensis for control of Indian meal moth.

PubMed Central

Schesser, J H

1976-01-01

Doses of four commercial formulations and one experimental formulation of Bacillus thuringiensis Berliner were mixed with the diet used to rear colonies of the Indian meal moth Plodia interpunctella (Hübner). Indian meal moth eggs were introduced to the treated diet, and the resultant adult emergence was tabulated. The experimental formulations ranked as follows in efficacy in controlling the Indian meal moth: Dipel (50% lethal concentration [LC50], 25 mg/kg) greater than Bactospeine WP (LC50, 100 mg/kg) greater than Thuricide (LC50, 150 mg/kg) greater than IMC 90007 (LC30, 180 mg/kg) greater than Bactospeine Flowable (LC50, 440 mg/kg). PMID:984828

Commercial formulations of Bacillus thuringiensis for control of Indian meal moth.

PubMed

Schesser, J H

1976-10-01

Doses of four commercial formulations and one experimental formulation of Bacillus thuringiensis Berliner were mixed with the diet used to rear colonies of the Indian meal moth Plodia interpunctella (Hübner). Indian meal moth eggs were introduced to the treated diet, and the resultant adult emergence was tabulated. The experimental formulations ranked as follows in efficacy in controlling the Indian meal moth: Dipel (50% lethal concentration [LC50], 25 mg/kg) greater than Bactospeine WP (LC50, 100 mg/kg) greater than Thuricide (LC50, 150 mg/kg) greater than IMC 90007 (LC30, 180 mg/kg) greater than Bactospeine Flowable (LC50, 440 mg/kg).

The Small Aircraft Transportation System Higher Volume Operations (SATS HVO) Flight Experiment

NASA Technical Reports Server (NTRS)

Williams, Daniel M.; Murdoch, Jennifer L.; Adams, Catherine H.

2005-01-01

This paper provides a summary of conclusions from the Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) Flight Experiment which NASA conducted to determine pilot acceptability of the HVO concept for normal conditions. The SATS HVO concept improves efficiency at non-towered, non-radar airports in Instrument Meteorological Conditions (IMC) while achieving a level of safety equal to today s system. Reported are results from flight experiment data that indicate that the SATS HVO concept is viable. The success of the SATS HVO concept is based on acceptable pilot workload, performance, and subjective criteria when compared to the procedural control operations in use today at non-towered, non-radar controlled airfields in IMC. The HVO Flight Experiment, flown on NASA's Cirrus SR22, used a subset of the HVO Simulation Experiment scenarios and evaluation pilots in order to validate the simulation experiment results. HVO and Baseline (today s system) scenarios flown included: single aircraft arriving for a GPS non-precision approach; aircraft arriving for the approach with multiple traffic aircraft; and aircraft arriving for the approach with multiple traffic aircraft and then conducting a missed approach. Results reveal that all twelve low-time instrument-rated pilots preferred SATS HVO when compared to current procedural separation operations. These pilots also flew the HVO procedures safely and proficiently without additional workload in comparison to today s system (Baseline). Detailed results of pilot flight technical error, and their subjective assessments of workload and situation awareness are presented in this paper.

Polymorphic Transformation of Indomethacin during Hot Melt Extrusion Granulation: Process and Dissolution Control.

PubMed

Xu, Ting; Nahar, Kajalajit; Dave, Rutesh; Bates, Simon; Morris, Kenneth

2018-05-10

To study and elucidate the effect of the intensity and duration of processing stresses on the possible solid-state changes during a hot melt extrusion granulation process. Blends of α-indomethacin and PEG 3350 (w/w 4:1) were granulated using various screw sizes/designs on the melt extruder under different temperature regimes. Differential Scanning Calorimetry and X-ray Powder Diffraction were employed for characterization. The dissolution behavior of the pure polymorphs and the resulting granules was determined using in-situ fiber optic UV testing system. An XRPD quantitation method using Excel full pattern fitting was developed to determine the concentration of each constituent (amorphous, α and γ indomethacin and PEG) in samples collected from each functioning zone and in granules. Analysis of in-process samples and granules revealed that higher temperature (≥130°C) and shear stress accelerated the process induced phase transitions from amorphous and/or the α form to γ indomethacin during heating stage. However, rapid cooling resulted in an increased percentage of the α form allowing isolation of the meta-stable form. By determining the conditions that either prevent or facilitate process induced transformations of IMC polymorphs during melt granulation, a design space was developed to control the polymorph present in the resulting granules. This represents the conditions necessary to balance the thermodynamic relationships between the polymorphs of the IMC system and the kinetics of the possible transformations as a function of the processing stresses.

[Not Available].

PubMed

Flores Navarro-Pérez, Carmen; González-Jiménez, Emilio; Schmidt-RioVilla, Jacqueline; Meneses-Echávez, José Francisco; Correa-Bautista, Jorge Enrique; Correa-Rodríguez, María; Ramírez-Vélez, Robinson

2016-07-19

Objetivos: los objetivos de este estudio fueron analizar el nivel nutricional en una población de niños y adolescentes colombianos y determinar la posible relación entre el nivel nutricional y el estado nutricional según el índice de masa corporal (IMC) y la circunferencia de cintura (CC).Material y métodos: estudio transversal en 6.383 niños y adolescentes de entre 9 y 17,9 años de edad, de Bogotá, Colombia. Se aplicó de manera autodiligenciada el cuestionario Krece Plus validado en el estudio enKid como indicador del nivel nutricional con las categorías alto (test ≥ 9), medio (test 6-8) y bajo (test ≤ 5). Se tomaron medidas de peso, talla, CC, y se calculó el IMC como marcadores del estado nutricional.Resultados: de la población general, el 57,9% eran chicas (promedio de edad 12,7 ± 2,3 años). En todas las categorías del IMC, más del 50% de chicos y chicas siguen una dieta de muy baja calidad, que empeora progresivamente con el avance en edad. En ambos sexos, se observaron tendencias entre un nivel nutricional muy bajo con el desarrollo de sobrepeso. Asimismo, la obesidad abdominal por CC se relacionó con una puntuación baja en el Krece Plus en ambos sexos.Conclusiones: en escolares de Bogotá, una dieta de muy baja calidad se relacionó con alteraciones del estado nutricional (IMC y CC), especialmente entre chicas y adolescentes. Estos resultados deben alentar el desarrollo de intervenciones orientadas a mejorar los hábitos nutricionales entre los escolares colombianos.

Effects of eye dominance (left vs. right) and cannabis use on intermanual coordination and negative symptoms in schizophrenia patients.

PubMed

Gorynia, Inge; Schwaiger, Markus; Heinz, Andreas

2014-12-01

Based on the previous findings, it has been assumed that in schizophrenia patients, eye dominance and cannabis use will affect negative symptoms and intermanual coordination (IMC), an index of interhemispheric communication. But eye dominance, specifically the clinical findings for it, has been neglected in schizophrenia research. We therefore investigated its effects in 52 right-handed (36 right-eyed and 16 left-eyed) and 51 left-handed (35 left-eyed and 16 right-eyed) schizophrenia in-patients without and with drug use. Eye dominance affected IMC in all schizophrenia patients. When comparing right- and left-handers, we found that this result was only significant in the right-handed patients and in the smaller subgroup without drug use. In the right-handers, left eye dominance-like left-handedness-was associated with higher values in IMC and less pronounced manifestation of negative symptoms, right eye dominance was not. Thus, left-eyed right-handers may be more closely related to left-handers than to right-handers. In accordance with the results from the literature, we suggest that these findings are due to better interhemispheric connections and less impairment of white matter structures, especially in right-hemispheric regions. Moreover, cannabis use was related to higher scores in IMC and less pronounced negative symptoms, but only in the right-eyed and not in the left-eyed right-handers or in the left-handers. Hence, differences in eye dominance and handedness may be partially responsible for different results in interhemispheric connections among cannabis users. In conclusion, both eye dominance and use of cannabis should be taken into account when assessing clinical symptoms in schizophrenia patients.

Effects of Metallic Nanoparticles on Interfacial Intermetallic Compounds in Tin-Based Solders for Microelectronic Packaging

NASA Astrophysics Data System (ADS)

Haseeb, A. S. M. A.; Arafat, M. M.; Tay, S. L.; Leong, Y. M.

2017-10-01

Tin (Sn)-based solders have established themselves as the main alternative to the traditional lead (Pb)-based solders in many applications. However, the reliability of the Sn-based solders continues to be a concern. In order to make Sn-based solders microstructurally more stable and hence more reliable, researchers are showing great interest in investigating the effects of the incorporation of different nanoparticles into them. This paper gives an overview of the influence of metallic nanoparticles on the characteristics of interfacial intermetallic compounds (IMCs) in Sn-based solder joints on copper substrates during reflow and thermal aging. Nanocomposite solders were prepared by mechanically blending nanoparticles of nickel (Ni), cobalt (Co), zinc (Zn), molybdenum (Mo), manganese (Mn) and titanium (Ti) with Sn-3.8Ag-0.7Cu and Sn-3.5Ag solder pastes. The composite solders were then reflowed and their wetting characteristics and interfacial microstructural evolution were investigated. Through the paste mixing route, Ni, Co, Zn and Mo nanoparticles alter the morphology and thickness of the IMCs in beneficial ways for the performance of solder joints. The thickness of Cu3Sn IMC is decreased with the addition of Ni, Co and Zn nanoparticles. The thickness of total IMC layer is decreased with the addition of Zn and Mo nanoparticles in the solder. The metallic nanoparticles can be divided into two groups. Ni, Co, and Zn nanoparticles undergo reactive dissolution during solder reflow, causing in situ alloying and therefore offering an alternative route of alloy additions to solders. Mo nanoparticles remain intact during reflow and impart their influence as discrete particles. Mechanisms of interactions between different types of metallic nanoparticles and solder are discussed.

Assessment of degree of disorder (amorphicity) of lyophilized formulations of growth hormone using isothermal microcalorimetry.

PubMed

Mosharraf, Mitra

2004-05-01

When determining the degree of disorder of a lyophilized cake of a protein, it is important to use an appropriate analytical technique. Differential scanning calorimetry (DSC) and X-ray powder diffraction (XRPD) are the most commonly used thermoanalytical techniques for characterizing freeze-dried protein formulations. Unfortunately, these methods are unable to detect solid-state disorder at levels < 10%. Also, interpretation of DSC results for freeze-dried protein formulations can be difficult, as a result of the more complex thermal events occurring with this technique. For example, proteins can inhibit the thermally induced recrystallization of the lyophilized cake, resulting in potential misinterpretation of DSC degree of disorder results. The aim of this investigation was to study the use of isothermal microcalorimetry (IMC) in the assessment of degree of solid-state disorder (amorphicity) of lyophilized formulations of proteins. For this purpose, two formulations of growth hormone were prepared by lyophilization. These formulations consisted of the same amounts of protein, mannitol, glycine, and phosphate buffer, but differed in the freeze-drying procedure. After lyophilization, the recrystallization of the samples was studied using IMC at 25 degrees C under different relative humidities (58-75%). The effect of available surface area was studied by determining the heat of recrystallization (Q) of the samples before and after disintegration of the cakes. The results showed that, in contrast to DSC, IMC allowed detection of the recrystallization event in the formulations. Although both formulations were completely disordered and indistinguishable according to XRPD method, IMC revealed that formulation B had a different solid-sate structure than formulation A. This difference was the result of differences in the freeze-drying parameters, demonstrating the importance of choosing appropriate analytical methodology.

Nanoindentation on SnAgCu lead-free solder joints and analysis

NASA Astrophysics Data System (ADS)

Xu, Luhua; Pang, John H. L.

2006-12-01

The lead-free SnAgCu (SAC) solder joint on copper pad with organic solderability preservative (Cu-OSP) and electroless nickel and immersion gold (ENIG) subjected to thermal testing leads to intermetallic growth. It causes corresponding reliability concerns at the interface. Nanoindentation characterization on SnAgCu solder alloy, intermetallic compounds (IMCs), and the substrates subjected to thermal aging is reported. The modulus and hardness of thin IMC layers were measured by nanoindentation continuous stiffness measurement (CSM) from planar IMC surface. When SAC/Ni(Au) solder joints were subject to thermal aging, the Young’s modulus of the NiCuSn IMC at the SAC/ENIG specimen changed from 207 GPa to 146 GPa with different aging times up to 500 h. The hardness decreased from 10.0 GPa to 7.3 GPa. For the SAC/Cu-OSP reaction couple, the Young’s modulus of Cu6Sn5 stayed constant at 97.0 GPa and hardness about 5.7 GPa. Electron-probe microanalysis (EPMA) was used to thermal aging. The creep effect on the measured result was analyzed when measuring SnAgCu solder; it was found that the indentation penetration, and thus the hardness, is loading rate dependent. With the proposed constant P/P experiment, a constant indentation strain rate h/h and hardness could be achieved. The log-log plot of indentation strain rate versus hardness for the data from the constant P/P experiments yields a slope of 7.52. With the optimized test method and CSM Technique, the Modulus of SAC387 solder alloy and all the layers in a solder joint were investigated.

Influence of multi-walled carbon nanotubes on melting temperature and microstructural evolution of Pb-free Sn-5Sb/Cu solder joint

NASA Astrophysics Data System (ADS)

Dele-Afolabi, T. T.; Azmah Hanim, M. A.; Norkhairunnisa, M.; Suraya, M. T.; Yusoff, H. M.

2017-09-01

In this study, the effects of multi-walled carbon nanotubes on the melting temperature and microstructural evolution of the Sn-5Sb/Cu joints are evaluated. Plain and carbon nanotubes (CNTs) reinforced Sn-5Sb solder systems with solder formulations Sn-5Sb, Sn-5Sb-0.01CNT, Sn-5Sb-0.05CNT and Sn-5Sb-0.1CNT were prepared through the powder metallurgy route and thereafter samples were subjected to thermal and microstructural evaluation. As retrieved from the DSC scans, a slight decline in the peak temperature was observed in the composite solders which is indicative of the CNTs role in exciting surface instability in the host Sn matrix. In order to prepare the solder joints and analyze the interfacial intermetallic compound (IMC) evolution, respective solder systems were placed on copper (Cu) substrate and subjected to both reflow soldering and isothermal aging (170°C) conditions. From the IMC thickness result, considerable retardation in the IMC layer growth was observed in the CNTs reinforced solder joints, especially the 0.05wt.% CNTs solder system owing to the inhibition of Sn atoms diffusion by reinforcement material.

Application of chitosan and its N-heterocyclic derivatives for preconcentration of noble metal ions and their determination using atomic absorption spectrometry.

PubMed

Azarova, Yu A; Pestov, A V; Ustinov, A Yu; Bratskaya, S Yu

2015-12-10

Chitosan and its N-heterocyclic derivatives N-2-(2-pyridyl)ethylchitosan (2-PEC), N-2-(4-pyridyl) ethylchitosan (4-PEC), and N-(5-methyl-4-imidazolyl) methylchitosan (IMC) have been applied in group preconcentration of gold, platinum, and palladium for subsequent determination by atomic absorption spectroscopy (AAS) in solutions with high background concentrations of iron and sodium ions. It has been shown that the sorption mechanism, which was elucidated by XPS, significantly influences the sorption capacity of materials, the efficiency of metal ions elution after preconcentration, and, as a result, the accuracy of metal determination by AAS. We have shown that native chitosan was not suitable for preconcentration of Au(III), if the elution step was used as a part of the analysis scheme. The group preconcentration of Au(III), Pd(II), and Pt(IV) with subsequent quantitative elution using 0.1M HCl/1M thiourea solution was possible only on IMC and 4-PEC. Application of IMC for analysis of the national standard quartz ore sample proved that gold could be accurately determined after preconcentration/elution with the recovery above 80%. Copyright © 2015 Elsevier Ltd. All rights reserved.

Azobenzene-based organic salts with ionic liquid and liquid crystalline properties

DOE PAGES

Stappert, Kathrin; Muthmann, Johanna; Spielberg, Eike T.; ...

2015-07-23

Two sets of new azobenzene-based bromide salts are synthesized, and their thermal photochromic properties are studied. Both sets are based on the imidazolium cation. The first set (1) features a symmetric biscation where two imidazolium head groups (Im) with different alkyl chains (Cn) are connected to a central azobenzene unit (Azo): [Azo(C1-Im-Cn) 2]; n = 6, 8, 10, 12, 14. The other one contains an n-alkyl-imidazolium cation (Cn-Im) bearing a terminal azobenzene unit (C1-Azo) substituted with an alkoxy chain (O-Cm) of either two (2) or six (3) carbon atoms: [C1-Azo-O-Cm-Im-Cn]; m = 2, n = 8, 10, 12 and mmore » = 6, n = 8, 10, 12, 14, 16. For both cation classes, the influence of alkyl chains of varying length on the thermal phase behavior was investigated by differential scanning calorimetry (DSC) and polarizing optical microscopy (POM). For five compounds (Azo(-C1-Im-C12) 2 (1d), Azo(-C1-Im-C12) 2 (1e), C1-Azo-O-C2-Im-C10 (2b), C1-Azo-O-C2-Im-C12 (2c), and C1-Azo-O-C6-Im-C16 (3e)), the formation of a liquid crystalline phase was observed. The biscationic salts (1) are all comparatively high melting organic salts (180–240 °C), and only the two representatives with long alkylchains (C12 and C14) exhibit liquid crystallinity. The monocationic salts with an O–C2 bridge (2) melt between 140 and 170 °C depending on the alkyl chain length, but from an alkyl chain of 10 and more carbon atoms on they form a smectic A liquid crystalline phase. The representatives of the third set with a O–C6 bridge qualify as ionic liquids with melting points less than 100 °C. However, only the representative with a hexadecyl chain forms a liquid crystalline phase. Representative single crystals for all sets of cations could be grown that allowed for single crystal structure analysis. Together with small-angle X-ray scattering experiments they allow for a more detailed understanding of the thermal properties. As a result, through irradiation with UV-light (320–366 nm) all compounds undergo trans–cis isomerization, which reverses under visible light (440 nm).« less

Growth performance, meat quality traits, and genetic mapping of quantitative trait loci in 3 generations of Japanese quail populations (Coturnix japonica).

PubMed

Tavaniello, S; Maiorano, G; Siwek, M; Knaga, S; Witkowski, A; Di Memmo, D; Bednarczyk, M

2014-08-01

The current research was conducted to compare growth, carcass traits, pH, intramuscular collagen (IMC) properties, and genetic bases of IMC and carcasses (breast-muscle weight) of different lines and generations of adult males and females of Japanese quail (Coturnix japonica). Forty-four quails (generation F0), 22 Pharaoh (F-33) meat-type males and 22 Standard (S-22) laying-type females, were crossed to produce the F1 hybrids generation. The F2 generation was created by mating one F1 male with one F1 female, full siblings. The birds, randomly chosen from F0 (22 males and 22 females), F1 (22 males and 22 females), and F2 (84 males and 152 females) were raised to 20 wk of age in collective cages. Quails were fed ad libitum commercial diets. At slaughter, all birds were individually weighed (after a fasting period of 12 h) and dressing yield (without giblets) was calculated. The carcasses were then dissected. Genomic DNA was extracted from all of the blood, and 30 microsatellite markers located on 2 quail chromosomes were genotyped. The F -: 33 quails had higher in vivo and postmortem performances and a higher abdominal fat percentage than those of the egg line. Meat from S -: 22 quails had a slower collagen maturation (hydroxylysylpyridinoline crosslink/collagen) and a higher ultimate pH. The F1 and F2 generations showed an evident sexual dimorphism, and an additional effect could be due to hybrid heterosis evident in F2. Meat from quails of F1 and F2 generations had a lower IMC amount with a higher degree of collagen maturation compared with parental lines. Two statistically significant QTL have been detected on quail chromosome 2 (CJA02): a QTL with an additive effect (0.50) for IMC in the marker bracket GUJ0037 and GUJ0093; a second QTL with additive (1.32) and dominant (1.91) effects for breast-muscle weight in the marker bracket GUJ0084 and GUJ0073. To our knowledge, this is the first report of a QTL associated with breast-muscle weight and IMC in quail and poultry species, respectively. © Poultry Science Association Inc.

Interfacial Reaction and Mechanical Properties of Sn-Bi Solder joints

PubMed Central

Huang, Ying; Zhang, Zhijie

2017-01-01

Sn-Bi solder with different Bi content can realize a low-to-medium-to-high soldering process. To obtain the effect of Bi content in Sn-Bi solder on the microstructure of solder, interfacial behaviors in solder joints with Cu and the joints strength, five Sn-Bi solders including Sn-5Bi and Sn-15Bi solid solution, Sn-30Bi and Sn-45Bi hypoeutectic and Sn-58Bi eutectic were selected in this work. The microstructure, interfacial reaction under soldering and subsequent aging and the shear properties of Sn-Bi solder joints were studied. Bi content in Sn-Bi solder had an obvious effect on the microstructure and the distribution of Bi phases. Solid solution Sn-Bi solder was composed of the β-Sn phases embedded with fine Bi particles, while hypoeutectic Sn-Bi solder was composed of the primary β-Sn phases and Sn-Bi eutectic structure from networked Sn and Bi phases, and eutectic Sn-Bi solder was mainly composed of a eutectic structure from short striped Sn and Bi phases. During soldering with Cu, the increase on Bi content in Sn-Bi solder slightly increased the interfacial Cu6Sn5 intermetallic compound (IMC)thickness, gradually flattened the IMC morphology, and promoted the accumulation of more Bi atoms to interfacial Cu6Sn5 IMC. During the subsequent aging, the growth rate of the IMC layer at the interface of Sn-Bi solder/Cu rapidly increased from solid solution Sn-Bi solder to hypoeutectic Sn-Bi solder, and then slightly decreased for Sn-58Bi solder joints. The accumulation of Bi atoms at the interface promoted the rapid growth of interfacial Cu6Sn5 IMC layer in hypoeutectic or eutectic Sn-Bi solder through blocking the formation of Cu6Sn5 in solder matrix and the transition from Cu6Sn5 to Cu3Sn. Ball shear tests on Sn-Bi as-soldered joints showed that the increase of Bi content in Sn-Bi deteriorated the shear strength of solder joints. The addition of Bi into Sn solder was also inclined to produce brittle morphology with interfacial fracture, which suggests that the addition of Bi increased the shear resistance strength of Sn-Bi solder. PMID:28792440

Improving the performance of community health workers in humanitarian emergencies: a realist evaluation protocol for the PIECES programme

PubMed Central

Gilmore, Brynne; Adams, Ben Jack; Bartoloni, Alex; Alhaydar, Bana; McAuliffe, Eilish; Raven, Joanna; Taegtmeyer, Miriam; Vallières, Frédérique

2016-01-01

Introduction Understanding what enhances the motivation and performance of community health workers (CHWs) in humanitarian emergencies represents a key research gap within the field of human resources for health. This paper presents the research protocol for the Performance ImprovEment of CHWs in Emergency Settings (PIECES) research programme. Enhancing Learning and Research in Humanitarian Action (ELRHA) funded the development of this protocol as part of their Health in Humanitarian Crises (R2HC) call (No.19839). PIECES aims to understand what factors improve the performance of CHWs in level III humanitarian emergencies. Methods and analysis The suggested protocol uses a realist evaluation with multiple cases across the 3 country sites: Turkey, Iraq and Lebanon. Working with International Medical Corps (IMC), an initial programme theory was elicited through literature and document reviews, semistructured interviews and focus groups with IMC programme managers and CHWs. Based on this initial theory, this protocol proposes a combination of semistructured interviews, life histories and critical incident narratives, surveys and latent variable modelling of key constructs to explain how contextual factors work to trigger mechanisms for specific outcomes relating to IMC's 300+ CHWs' performance. Participants will also include programme staff, CHWs and programme beneficiaries. Realist approaches will be used to better understand ‘what works, for whom and under what conditions’ for improving CHW performance within humanitarian contexts. Ethics and dissemination Trinity College Dublin's Health Policy and Management/Centre for Global Health Research Ethics Committee gave ethical approval for the protocol development phase. For the full research project, additional ethical approval will be sought from: Université St. Joseph (Lebanon), the Ethics Committee of the Ministry of Health in Baghdad (Iraq) and the Middle East Technical University (Turkey). Dissemination activities will involve a mixture of research feedback, policy briefs, guidelines and recommendations, as well as open source academic articles. PMID:27531730

Improving the performance of community health workers in humanitarian emergencies: a realist evaluation protocol for the PIECES programme.

PubMed

Gilmore, Brynne; Adams, Ben Jack; Bartoloni, Alex; Alhaydar, Bana; McAuliffe, Eilish; Raven, Joanna; Taegtmeyer, Miriam; Vallières, Frédérique

2016-08-16

Understanding what enhances the motivation and performance of community health workers (CHWs) in humanitarian emergencies represents a key research gap within the field of human resources for health. This paper presents the research protocol for the Performance ImprovEment of CHWs in Emergency Settings (PIECES) research programme. Enhancing Learning and Research in Humanitarian Action (ELRHA) funded the development of this protocol as part of their Health in Humanitarian Crises (R2HC) call (No.19839). PIECES aims to understand what factors improve the performance of CHWs in level III humanitarian emergencies. The suggested protocol uses a realist evaluation with multiple cases across the 3 country sites: Turkey, Iraq and Lebanon. Working with International Medical Corps (IMC), an initial programme theory was elicited through literature and document reviews, semistructured interviews and focus groups with IMC programme managers and CHWs. Based on this initial theory, this protocol proposes a combination of semistructured interviews, life histories and critical incident narratives, surveys and latent variable modelling of key constructs to explain how contextual factors work to trigger mechanisms for specific outcomes relating to IMC's 300+ CHWs' performance. Participants will also include programme staff, CHWs and programme beneficiaries. Realist approaches will be used to better understand 'what works, for whom and under what conditions' for improving CHW performance within humanitarian contexts. Trinity College Dublin's Health Policy and Management/Centre for Global Health Research Ethics Committee gave ethical approval for the protocol development phase. For the full research project, additional ethical approval will be sought from: Université St. Joseph (Lebanon), the Ethics Committee of the Ministry of Health in Baghdad (Iraq) and the Middle East Technical University (Turkey). Dissemination activities will involve a mixture of research feedback, policy briefs, guidelines and recommendations, as well as open source academic articles. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Wavelet-based analysis of transient electromagnetic wave propagation in photonic crystals.

PubMed

Shifman, Yair; Leviatan, Yehuda

2004-03-01

Photonic crystals and optical bandgap structures, which facilitate high-precision control of electromagnetic-field propagation, are gaining ever-increasing attention in both scientific and commercial applications. One common photonic device is the distributed Bragg reflector (DBR), which exhibits high reflectivity at certain frequencies. Analysis of the transient interaction of an electromagnetic pulse with such a device can be formulated in terms of the time-domain volume integral equation and, in turn, solved numerically with the method of moments. Owing to the frequency-dependent reflectivity of such devices, the extent of field penetration into deep layers of the device will be different depending on the frequency content of the impinging pulse. We show how this phenomenon can be exploited to reduce the number of basis functions needed for the solution. To this end, we use spatiotemporal wavelet basis functions, which possess the multiresolution property in both spatial and temporal domains. To select the dominant functions in the solution, we use an iterative impedance matrix compression (IMC) procedure, which gradually constructs and solves a compressed version of the matrix equation until the desired degree of accuracy has been achieved. Results show that when the electromagnetic pulse is reflected, the transient IMC omits basis functions defined over the last layers of the DBR, as anticipated.

Preliminary Effect of Synthetic Vision Systems Displays to Reduce Low-Visibility Loss of Control and Controlled Flight Into Terrain Accidents

NASA Technical Reports Server (NTRS)

Glaab, Louis J.; Takallu, Mohammad A.

2002-01-01

An experimental investigation was conducted to study the effectiveness of Synthetic Vision Systems (SVS) flight displays as a means of eliminating Low Visibility Loss of Control (LVLOC) and Controlled Flight Into Terrain (CFIT) accidents by low time general aviation (GA) pilots. A series of basic maneuvers were performed by 18 subject pilots during transition from Visual Meteorological Conditions (VMC) to Instrument Meteorological Conditions (IMC), with continued flight into IMC, employing a fixed-based flight simulator. A total of three display concepts were employed for this evaluation. One display concept, referred to as the Attitude Indicator (AI) replicated instrumentation common in today's General Aviation (GA) aircraft. The second display concept, referred to as the Electronic Attitude Indicator (EAI), featured an enlarged attitude indicator that was more representative of a glass display that also included advanced flight symbology, such as a velocity vector. The third concept, referred to as the SVS display, was identical to the EAI except that computer-generated terrain imagery replaced the conventional blue-sky/brown-ground of the EAI. Pilot performance parameters, pilot control inputs and physiological data were recorded for post-test analysis. Situation awareness (SA) and qualitative pilot comments were obtained through questionnaires and free-form interviews administered immediately after the experimental session. Initial pilot performance data were obtained by instructor pilot observations. Physiological data (skin temperature, heart rate, and muscle flexure) were also recorded. Preliminary results indicate that far less errors were committed when using the EAI and SVS displays than when using conventional instruments. The specific data example examined in this report illustrates the benefit from SVS displays to avoid massive loss of SA conditions. All pilots acknowledged the enhanced situation awareness provided by the SVS display concept. Levels of pilot stress appear to be correlated with skin temperature measurements.

A modified constitutive model for creep of Sn-3.5Ag-0.7Cu solder joints

NASA Astrophysics Data System (ADS)

Han, Y. D.; Jing, H. Y.; Nai, S. M. L.; Tan, C. M.; Wei, J.; Xu, L. Y.; Zhang, S. R.

2009-06-01

In this study, the constitutive behaviour for creep performance of 95.8Sn-3.5Ag-0.7Cu lead-free solder joints was investigated. It was observed that the stress exponent (n) can be well defined into two stress regimes: low stress and high stress. A new, improved constitutive model, which considered back stress, was proposed to describe the creep behaviour of SnAgCu solder joints. In this model, the back stress, which is a function of the applied shear stress in the low stress regime (LSR) and a function of the particle size, volume fraction and coarsening of IMC particles in the high stress regime (HSR), was introduced to construct the relationship between the creep strain rate and the shear stress. The creep mechanism in these two stress regimes was studied in detail. In the LSR, dislocations passed through the matrix by climbing over the intermetallic particles, while in the HSR, the dislocations were glide-controlled. According to the different creep mechanisms in both the stress regimes, the back stress was calculated, respectively, and then incorporated into the Arrhenius power-law creep model. It was demonstrated that the predicted strain rate-shear stress behaviour employing the modified creep constitutive model which considered back stress, was in good agreement with the experimental results.

Effectively Transforming IMC Flight into VMC Flight: An SVS Case Study

NASA Technical Reports Server (NTRS)

Glaab, Louis J.; Hughes, Monic F.; Parrish, Russell V.; Takallu, Mohammad A.

2006-01-01

A flight-test experiment was conducted using the NASA LaRC Cessna 206 aircraft. Four primary flight and navigation display concepts, including baseline and Synthetic Vision System (SVS) concepts, were evaluated in the local area of Roanoke Virginia Airport, flying visual and instrument approach procedures. A total of 19 pilots, from 3 pilot groups reflecting the diverse piloting skills of the GA population, served as evaluation pilots. Multi-variable Discriminant Analysis was applied to three carefully selected and markedly different operating conditions with conventional instrumentation to provide an extension of traditional analysis methods as well as provide an assessment of the effectiveness of SVS displays to effectively transform IMC flight into VMC flight.

Comparative Study of ENIG and ENEPIG as Surface Finishes for a Sn-Ag-Cu Solder Joint

NASA Astrophysics Data System (ADS)

Yoon, Jeong-Won; Noh, Bo-In; Jung, Seung-Boo

2011-09-01

Interfacial reactions and joint reliability of Sn-3.0Ag-0.5Cu solder with two different surface finishes, electroless nickel-immersion gold (ENIG) and electroless nickel-electroless palladium-immersion gold (ENEPIG), were evaluated during a reflow process. We first compared the interfacial reactions of the two solder joints and also successfully revealed a connection between the interfacial reaction behavior and mechanical reliability. The Sn-Ag-Cu/ENIG joint exhibited a higher intermetallic compound (IMC) growth rate and a higher consumption rate of the Ni(P) layer than the Sn-Ag-Cu/ENEPIG joint. The presence of the Pd layer in the ENEPIG suppressed the growth of the interfacial IMC layer and the consumption of the Ni(P) layer, resulting in the superior interfacial stability of the solder joint. The shear test results show that the ENIG joint fractured along the interface, exhibiting indications of brittle failure possibly due to the brittle IMC layer. In contrast, the failure of the ENEPIG joint only went through the bulk solder, supporting the idea that the interface is mechanically reliable. The results from this study confirm that the Sn-Ag-Cu/ENEPIG solder joint is mechanically robust and, thus, the combination is a viable option for a Pb-free package system.

Characterization of Low-Melting-Point Sn-Bi-In Lead-Free Solders

NASA Astrophysics Data System (ADS)

Li, Qin; Ma, Ninshu; Lei, YongPing; Lin, Jian; Fu, HanGuang; Gu, Jian

2016-11-01

Development of lead-free solders with low melting temperature is important for substitution of Pb-based solders to reduce direct risks to human health and the environment. In the present work, Sn-Bi-In solders were studied for different ratios of Bi and Sn to obtain solders with low melting temperature. The microstructure, thermal properties, wettability, mechanical properties, and reliability of joints with Cu have been investigated. The results show that the microstructures of the Sn-Bi-In solders were composed of β-Sn, Bi, and InBi phases. The intermetallic compound (IMC) layer was mainly composed of Cu6Sn5, and its thickness increased slightly as the Bi content was increased. The melting temperature of the solders was around 100°C to 104°C. However, when the Sn content exceeded 50 wt.%, the melting range became larger and the wettability became worse. The tensile strength of the solder alloys and solder joints declined with increasing Bi content. Two fracture modes (IMC layer fracture and solder/IMC mixed fracture) were found in solder joints. The fracture mechanism of solder joints was brittle fracture. In addition, cleavage steps on the fracture surface and coarse grains in the fracture structure were comparatively apparent for higher Bi content, resulting in decreased elongation for both solder alloys and solder joints.

Induction of hair follicle dermal papilla cell properties in human induced pluripotent stem cell-derived multipotent LNGFR(+)THY-1(+) mesenchymal cells

PubMed Central

Veraitch, Ophelia; Mabuchi, Yo; Matsuzaki, Yumi; Sasaki, Takashi; Okuno, Hironobu; Tsukashima, Aki; Amagai, Masayuki; Okano, Hideyuki; Ohyama, Manabu

2017-01-01

The dermal papilla (DP) is a specialised mesenchymal component of the hair follicle (HF) that plays key roles in HF morphogenesis and regeneration. Current technical difficulties in preparing trichogenic human DP cells could be overcome by the use of highly proliferative and plastic human induced pluripotent stem cells (hiPSCs). In this study, hiPSCs were differentiated into induced mesenchymal cells (iMCs) with a bone marrow stromal cell phenotype. A highly proliferative and plastic LNGFR(+)THY-1(+) subset of iMCs was subsequently programmed using retinoic acid and DP cell activating culture medium to acquire DP properties. The resultant cells (induced DP-substituting cells [iDPSCs]) exhibited up-regulated DP markers, interacted with human keratinocytes to up-regulate HF related genes, and when co-grafted with human keratinocytes in vivo gave rise to fibre structures with a hair cuticle-like coat resembling the hair shaft, as confirmed by scanning electron microscope analysis. Furthermore, iDPSCs responded to the clinically used hair growth reagent, minoxidil sulfate, to up-regulate DP genes, further supporting that they were capable of, at least in part, reproducing DP properties. Thus, LNGFR(+)THY-1(+) iMCs may provide material for HF bioengineering and drug screening for hair diseases. PMID:28220862

An Investigation of the Microstructure of an Intermetallic Layer in Welding Aluminum Alloys to Steel by MIG Process

PubMed Central

Nguyen, Quoc Manh; Huang, Shyh-Chour

2015-01-01

Butt joints of A5052 aluminum alloy and SS400 steel, with a new type of chamfered edge, are welded by means of metal inert gas welding and ER4043 Al-Si filler metal. The microhardness and microstructure of the joint are investigated. An intermetallic layer is found on the surface of the welding seam and SS400 steel sheet. The hardness of the intermetallic layer is examined using the Vickers hardness test. The average hardness values at the Intermetallic (IMC) layer zone and without the IMC layer zone were higher than that of the welding wire ER4043. The tensile strength test showed a fracture at the intermetallic layer when the tensile strength is 225.9 MPa. The tensile value test indicated the average of welds was equivalent to the 85% tensile strength of the A5052 aluminum alloy. The thickness of the intermetallic layers is non-uniform at different positions with the ranges from 1.95 to 5 μm. The quality of the butt joint is better if the intermetallic layer is minimized. The Si crystals which appeared at the welding seam, indicating that this element participated actively during the welding process, also contributed to the IMC layer’s formation. PMID:28793708

An Investigation of the Microstructure of an Intermetallic Layer in Welding Aluminum Alloys to Steel by MIG Process.

PubMed

Nguyen, Quoc Manh; Huang, Shyh-Chour

2015-12-02

Butt joints of A5052 aluminum alloy and SS400 steel, with a new type of chamfered edge, are welded by means of metal inert gas welding and ER4043 Al-Si filler metal. The microhardness and microstructure of the joint are investigated. An intermetallic layer is found on the surface of the welding seam and SS400 steel sheet. The hardness of the intermetallic layer is examined using the Vickers hardness test. The average hardness values at the Intermetallic (IMC) layer zone and without the IMC layer zone were higher than that of the welding wire ER4043. The tensile strength test showed a fracture at the intermetallic layer when the tensile strength is 225.9 MPa. The tensile value test indicated the average of welds was equivalent to the 85% tensile strength of the A5052 aluminum alloy. The thickness of the intermetallic layers is non-uniform at different positions with the ranges from 1.95 to 5 μm. The quality of the butt joint is better if the intermetallic layer is minimized. The Si crystals which appeared at the welding seam, indicating that this element participated actively during the welding process, also contributed to the IMC layer's formation.

Enhancement of Sn-Bi-Ag Solder Joints with ENEPIG Surface Finish for Low-Temperature Interconnection

NASA Astrophysics Data System (ADS)

Pun, Kelvin P. L.; Islam, M. N.; Rotanson, Jason; Cheung, Chee-wah; Chan, Alan H. S.

2018-05-01

Low-temperature soldering constitutes a promising solution in interconnect technology with the increasing trend of heat-sensitive materials in integrated circuit packaging. Experimental work was carried out to investigate the effect of electroless Ni/electroless Pd/immersion gold (ENEPIG) layer thicknesses on Sn-Bi-Ag solder joint integrity during extended reflow at peak temperatures as low as 175°C. Optimizations are proposed to obtain reliable solder joints through analysis of interfacial microstructure with the resulting joint integrity under extended reflow time. A thin Ni(P) layer with thin Pd led to diffusion of Cu onto the interface resulting in Ni3Sn4 intermetallic compound (IMC) spalling with the formation of thin interfacial (Ni,Cu)3Sn4 IMCs which enhance the robustness of the solder after extended reflow, while thick Ni(P) with thin Pd resulted in weakened solder joints with reflow time due to thick interfacial Ni3Sn4 IMCs with the entrapped brittle Bi-phase. With a suitable thin Ni(P), the Pd thickness has to be optimized to prevent excessive Ni-P consumption and early Cu outward diffusion to enhance the solder joint during extended reflow. Based on these findings, suitable Ni(P) and Pd thicknesses of ENEPIG are recommended for the formation of robust low-temperature solder joints.

Packaging Reliability Effect of ENIG and ENEPIG Surface Finishes in Board Level Thermal Test under Long-Term Aging and Cycling

PubMed Central

Shen, Chaobo; Hai, Zhou; Zhao, Cong; Zhang, Jiawei; Evans, John L.; Bozack, Michael J.; Suhling, Jeffrey C.

2017-01-01

This study illustrates test results and comparative literature data on the influence of isothermal aging and thermal cycling associated with Sn-1.0Ag-0.5Cu (SAC105) and Sn-3.0Ag-0.5Cu (SAC305) ball grid array (BGA) solder joints finished with ENIG and ENEPIG on the board side and ENIG on the package side compared with ImAg plating on both sides. The resulting degradation data suggests that the main concern for 0.4 mm pitch 10 mm package size BGA is package side surface finish, not board side. That is, ENIG performs better than immersion Ag for applications involving long-term isothermal aging. SAC305, with a higher relative fraction of Ag3Sn IMC within the solder, performs better than SAC105. SEM and polarized light microscope analysis show cracks propagated from the corners to the center or even to solder bulk, which eventually causes fatigue failure. Three factors are discussed: IMC, grain structure, and Ag3Sn particle. The continuous growth of Cu-Sn intermetallic compounds (IMC) and grains increase the risk of failure, while Ag3Sn particles seem helpful in blocking the crack propagation. PMID:28772811

Effect of the Silver Content of SnAgCu Solder on the Interfacial Reaction and on the Reliability of Angle Joints Fabricated by Laser-Jet Soldering

NASA Astrophysics Data System (ADS)

Ji, Hongjun; Ma, Yuyou; Li, Mingyu; Wang, Chunqing

2015-02-01

The silver content of lead-free solders affects their microstructure, the interfacial reaction, and the performance of the joints in reliability tests. In this study, Sn3.0Ag0.5Cu (wt.%, SAC305) and Sn1.0Ag0.5Cu (wt.%, SAC105) solder balls of diameter 55 μm were reflowed on gold surface pads by laser-jet soldering. It was found that four types of layered intermetallic compound (IMC) were formed at the interfaces; these were Au5Sn/AuSn, AuSn, AuSn2, and AuSn4 from the pad side to the solder matrix. The Au5Sn/AuSn eutectic region, thickness 400 nm, formed because of the high cooling rate induced by the laser-jet soldering. During high-temperature storage tests, the silver became segregated at the interfaces between the Au-Sn IMC and the solder matrix, resulting in inhibition of IMC growth in SAC305 joints, the shear strengths of which were higher than those of SAC105 joints. In mechanical drop tests, however, percentage failure of the SAC305 joints was twice that of the SAC105 joints.

[Not Available].

PubMed

De Arriba Muñoz, Antonio; López Úbeda, Marta; Rueda Caballero, Carmen; Labarta Aizpún, José Ignacio; Ferrández Longás, Ángel

2016-07-19

Introducción: saber diagnosticar y tratar la obesidad se ha convertido en el mayor reto del siglo XXI, debido al aumento de su prevalencia.Objetivos: determinar los valores de normalidad de perímetro abdominal (PA) e índice de masa corporal (IMC) según edad y sexo en población española sana.Métodos: estudio longitudinal observacional realizado entre 1980 y 2014. Se incluyeron 165 niños y 169 niñas recién nacidas, recogiendo datos de forma anual hasta los 18 años (74 varones y 92 mujeres), y posteriormente a los 28 años (42 varones y 45 mujeres). Se realizó medición de peso, longitud/talla y perímetro abdominal. Se calcularon los percentiles (P3, P10, P25, P50, P75, P90, P97) de IMC y PA según edad y sexo.Resultados: se presentan datos evolutivos de IMC y PA durante la infancia, destacando cómo aumentan los valores entre los 18 y 28 años de los percentiles superiores al p50, sobre todo en mujeres. Existe una correlación positiva en relación al PA entre el valor obtenido a los 3 años con el valor de los 18 años y de los 28 años tanto en varones (r = 0,722 y r = 0,605, p = 0,000, respectivamente) como en mujeres(r = 0,922, r = 0,857, p = 0,000, respectivamente). Y entre los 18 y 28 años (r = 0,731, p = 0,000 para varones y r = 0,961, p = 0,000 para mujeres).Conclusión: se presentan valores de normalidad de PA e IMC según edad y sexo, que podrán utilizarse como herramienta de referencia para identificar a personas con riesgo de desarrollar enfermedades cardiovasculares o diabetes.

[Not Available].

PubMed

López-Fuenzalida, Antonio; Valdés-Badilla, Pablo; Herrera-Valenzuela, Tomás; Rodríguez Canales, Carolina; Reyes Ponc, Álvaro; Arriaza Ardiles, Enrique; Durán Agüero, Samuel

2016-06-30

Introducción: la categorización del estado nutricional a través del índice de masa corporal (IMC) es uno de los recursos de valoración clínica más utilizados en el síndrome metabólico (SM). Sin embargo, es desconocida su capacidad para identificar las diferencias en la composición corporal.Objetivo: determinar si las variaciones en el estado nutricional se reflejan en la composición corporal en mujeres con SM e identificar la concordancia de clasificación del riesgo cardiometabólico entre el estado nutricional e índices antropométricos.Material y métodos: la muestra incluyó 136 mujeres (edad 42 ± 3,5 años) con SM. Se evaluó el estado nutricional, masa muscular, masa adiposa, perímetro de cintura (PC), índice cintura-cadera (ICC) e índice cintura-estatura (ICE). Se compararon los valores de composición corporale índices antropométricos; adicionalmente se determinó la concordancia clasificatoria del riesgo cardiometabólico entre los índices y el IMC.Resultados: solo la edad (p = 0,358), estatura (p = 0,209) y porcentaje de adiposidad (p = 0,234) no mostraron diferencias significativas entre los grupos. La mejor concordancia clasificatoria del riesgo cardiometabólico se observó en el PC > 88 cm (94,9%) e ICE ≥ 0,5 (94,1%) al categorizar el IMC en normopeso vs. exceso de peso; mientras que el PC > 88 cm obtuvo mejor concordancia separando al grupo en normopeso-sobrepesovs. obesidad (85,3%), aunque la sensibilidad y especificidad fueron más homogéneas con el ICC ≥ 0,85.Conclusión: el IMC no logra identificar las variaciones de la adiposidad corporal en mujeres con SM agrupadas según su estado nutricional. El IMC presenta mejor sensibilidad que especificidad respecto a los índices considerados para determinar riesgo cardiometabólico en mujeres con SM.

Le surpoids, l’obésité et le contrôle glycémique chez les diabétiques du centre de référence provincial de diabète (CRD), Kénitra, Maroc

PubMed Central

Lotfi, Zeghari; Aboussaleh, Youssef; Sbaibi, Rachid; Achouri, Imane; Benguedour, Rachid

2017-01-01

Introduction Le diabète est définit comme un trouble de l'assimilation, de l'utilisation et du stockage des sucres apportés par l'alimentation, sa prise en charge est assurée par le suivi du surpoids et l'obésité et le contrôle glycémique régulier. L'objectif de ce travail était l'étude du surpoids, l'obésité et le contrôle glycémique chez 2227 diabétiques de différent type (type 1, 2 et gestationnel), consultants le centre de référence provincial de diabète (CRD), Kénitra-Maroc. Méthodes L'étude s'est déroulée sur une période d'une année du mois janvier au mois décembre 2015, L'évaluation du surpoids et l'obésité a été effectuée par le calcul de l'Indice de Masse Corporelle (IMC=Poids/Taille2 (Kg/m2)), elles sont définit respectivement par IMC > 25 Kg/m2, et IMC > 30 Kg/m2, le poids et la taille ont été mesurés selon les recommandations de l'organisation mondiale de santé (OMS), Le contrôle glycémique a été effectué par l'analyse sanguine de l'Hémoglobine glycosylée et de la Glycémie à jeun. Les normes sont 7% pour l'Hémoglobine glycosylée et 0,70g/l à 1,10g/l pour la Glycémie à jeun. Résultats L'intervalle d'âges des patients est compris entre 8 mois et 80 ans, avec une dominance des diabétiques provenant du milieu urbain (74%) par rapport à ceux provenant du milieu rural (26%). Le surpoids touche l'ensemble de cette population. L'IMC moyen des femmes tends vers l'obésité (IMC≈30): (29,21 Kg/m2 ± 3,1) pour le diabète gestationnel et (29,15 Kg/m2 ± 3,2) pour le diabète de type 2. Les valeurs du contrôle glycémique sont supérieures aux normes: avec 8,5% ± 2,6 > 7% pour l'hémoglobine glycosylée et 1,5 g/l ± 1,3 > 1,10g/l pour la Glycémie à jeun. La différence entre les valeurs de l'hémoglobine glycosylée entre les hommes (8,5 7% ± 2,6) et les femmes (8,1% ± 2,3) n'est pas significative (P > 0,05), même chose pour la Glycémie capillaire à jeun: pour les hommes (1,44 g/l ± 1,1) et les femmes (1,43 g/l ± 1,2). Les coefficients de corrélation de Pearson sont hautement significatifs (P<0,005); d'une part entre IMC et la Glycémie à jeun (r = 0,5) et d'autre part entre IMC et les valeurs de l'Hémoglobine glycosylée (r = 0,4). Conclusion L'ensemble des diabétiques présente des valeurs de l'IMC et du contrôle glycémique, supérieures aux normes. Des recherches approfondies sont nécessaires sur ces diabétiques afin de dresser un programme urgent de remédiation. PMID:28904714

Effects of metallic nanoparticle doped flux on the interfacial intermetallic compounds between lead-free solder ball and copper substrate

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sujan, G.K., E-mail: sgkumer@gmail.com; Haseeb, A.S.M.A., E-mail: haseeb@um.edu.my; Afifi, A.B.M., E-mail: amalina@um.edu.my

2014-11-15

Lead free solders currently in use are prone to develop thick interfacial intermetallic compound layers with rough morphology which are detrimental to the long term solder joint reliability. A novel method has been developed to control the morphology and growth of intermetallic compound layers between lead-free Sn–3.0Ag–0.5Cu solder ball and copper substrate by doping a water soluble flux with metallic nanoparticles. Four types of metallic nanoparticles (nickel, cobalt, molybdenum and titanium) were used to investigate their effects on the wetting behavior and interfacial microstructural evaluations after reflow. Nanoparticles were dispersed manually with a water soluble flux and the resulting nanoparticlemore » doped flux was placed on copper substrate. Lead-free Sn–3.0Ag–0.5Cu solder balls of diameter 0.45 mm were placed on top of the flux and were reflowed at a peak temperature of 240 °C for 45 s. Angle of contact, wetting area and interfacial microstructure were studied by optical microscopy, field emission scanning electron microscopy and energy-dispersive X-ray spectroscopy. It was observed that the angle of contact increased and wetting area decreased with the addition of cobalt, molybdenum and titanium nanoparticles to flux. On the other hand, wettability improved with the addition of nickel nanoparticles. Cross-sectional micrographs revealed that both nickel and cobalt nanoparticle doping transformed the morphology of Cu{sub 6}Sn{sub 5} from a typical scallop type to a planer one and reduced the intermetallic compound thickness under optimum condition. These effects were suggested to be related to in-situ interfacial alloying at the interface during reflow. The minimum amount of nanoparticles required to produce the planer morphology was found to be 0.1 wt.% for both nickel and cobalt. Molybdenum and titanium nanoparticles neither appear to undergo alloying during reflow nor have any influence at the solder/substrate interfacial reaction. Thus, doping of flux with appropriate metallic nanoparticles can be successfully used to control the morphology and growth of intermetallic compound layers at the solder/substrate interface which is expected to lead to better reliability of electronic devices. - Highlights: • A novel nanodoped flux method has been developed to control the growth of IMCs. • Ni doped flux improves the wettability, but Co, Mo and Ti deteriorate it. • Ni and Co doped flux gives planer IMC morphology through in-situ alloying effect. • 0.1 wt.% Ni and Co addition into flux gives the lowest interfacial IMC thickness. • Mo and Ti doped flux does not have any influence at the interfacial reaction.« less

Proceedings of the NASA Workshop on Flight Deck Centered Parallel Runway Approaches in Instrument Meteorological Conditions

NASA Technical Reports Server (NTRS)

Waller, Marvin C. (Editor); Scanlon, Charles H. (Editor)

1996-01-01

A Government and Industry workshop on Flight-Deck-Centered Parallel Runway Approaches in Instrument Meteorological Conditions (IMC) was conducted October 29, 1996 at the NASA Langley Research Center. This document contains the slides and records of the proceedings of the workshop. The purpose of the workshop was to disclose to the National airspace community the status of ongoing NASA R&D to address the closely spaced parallel runway problem in IMC and to seek advice and input on direction of future work to assure an optimized research approach. The workshop also included a description of a Paired Approach Concept which is being studied at United Airlines for application at the San Francisco International Airport.

[Metabolic syndrome prevalence in teenagers of Monterrey, Nuevo Leon].

PubMed

Cárdenas-Villareal, Velia Margarita; López Alvarenga, Juan C; Bastarrachea, Raúl A; Rizo-Baeza, María Mercedes; Cortés-Castell, Ernesto

2010-01-01

To determine the prevalence of the metabolic syndrome (SM) and its components in teenagers from the metropolitan area of Monterrey Nuevo Leon, Mexico (AMM). A transversal research involving 254 teenage students from 10 to 19 years old. To research investigated their personal characteristics, anthropometrics measures, glucose, triglycerides and cholesterol HDL. The SM definition was adapted from the one suggested by the National Cholesterol Education Program-Adult Treatment Panel III (NCEP-ATPIII). The SM prevalence was 9.4 % (IC95%: 5.8 to 13.0), there was not a difference between the sexes. The prevalence among each SM component was: 24.4% for high triglycerides, 20.1% for abdominal obesity, 19.0% for cholesterol of lipoproteins of a high density (HDL-c) low, 11.4 % for high glucose and for high blood pressure (9.1% diastolic and 5.9% systolic). The prevalent SM phenotypes were corporal mass (IMC) (OR = 4.93, IC95%: 2.26, 10.73) and the IMC interaction of the teenager with a family history of obesity (OR = 1.37, IC95%: 1.0, 1.87). It was observed that those with a family history of diabetes type 2 only experienced a marginal effect. The SM prevalence in teenagers from AMM is high it was an alarming situation if it continues into adulthood. The existence of obesity in relatives of the first and second grade, altogether with teenager IMC are important prediction factors of SM.

Diallel Analysis and Growth Parameters as Selection Tools for Drought Tolerance in Young Theobroma cacao Plants

PubMed Central

dos Santos, Emerson Alves; de Almeida, Alex-Alan Furtado; Ahnert, Dario; Branco, Marcia Christina da Silva; Valle, Raúl René; Baligar, Virupax C.

2016-01-01

This study aimed to estimate the combining ability, of T. cacao genotypes preselected for drought tolerance through diallel crosses. The experiment was conducted under greenhouse conditions at the Cacao Research Center (CEPEC), Ilhéus, Bahia, Brazil, in a completely randomized block design, in an experimental arrangement 21 x 2 [21 complete diallel crosses and two water regimes (control and stressed)]. In the control, soil moisture was kept close to field capacity, with predawn leaf water potential (ΨWL) ranging from -0.1 to -0.5 MPa. In the drought regime, the soil moisture was reduced gradually by decreasing the amount of water application until ΨWL reached -2.0 to -2.5 MPa. Significant differences (p < 0.05) were observed for most morphological attributes analyzed regarding progenies, water regime and their interactions. The results of the joint diallel analysis revealed significant effects between general combining ability (GCA) x water regimes and between specific combining ability (SCA) x water regimes. The SCA 6 genetic material showed high general combining ability for growth variables regardless of the water regime. In general, the water deficit influenced the production of biomass in most of the evaluated T. cacao crosses, except for SCA-6 x IMC-67, Catongo x SCA, MOC-01 x Catongo, Catongo x IMC-67 and RB-40 x Catongo. Multivariate analysis showed that stem diameter (CD), total leaf area (TLA), leaf dry biomass (LDB), stem dry biomass (SDB), root dry biomass (RDB), total dry biomass (TDB), root length (RL), root volume (RV), root diameter (RD) <1 mm and 1 <(RD) <2 mm were the most important growth parameters in the separation of T. cacao genotypes in to tolerant and intolerant to soil water deficit. PMID:27504627

Diallel Analysis and Growth Parameters as Selection Tools for Drought Tolerance in Young Theobroma cacao Plants.

PubMed

Dos Santos, Emerson Alves; Almeida, Alex-Alan Furtado de; Ahnert, Dario; Branco, Marcia Christina da Silva; Valle, Raúl René; Baligar, Virupax C

2016-01-01

This study aimed to estimate the combining ability, of T. cacao genotypes preselected for drought tolerance through diallel crosses. The experiment was conducted under greenhouse conditions at the Cacao Research Center (CEPEC), Ilhéus, Bahia, Brazil, in a completely randomized block design, in an experimental arrangement 21 x 2 [21 complete diallel crosses and two water regimes (control and stressed)]. In the control, soil moisture was kept close to field capacity, with predawn leaf water potential (ΨWL) ranging from -0.1 to -0.5 MPa. In the drought regime, the soil moisture was reduced gradually by decreasing the amount of water application until ΨWL reached -2.0 to -2.5 MPa. Significant differences (p < 0.05) were observed for most morphological attributes analyzed regarding progenies, water regime and their interactions. The results of the joint diallel analysis revealed significant effects between general combining ability (GCA) x water regimes and between specific combining ability (SCA) x water regimes. The SCA 6 genetic material showed high general combining ability for growth variables regardless of the water regime. In general, the water deficit influenced the production of biomass in most of the evaluated T. cacao crosses, except for SCA-6 x IMC-67, Catongo x SCA, MOC-01 x Catongo, Catongo x IMC-67 and RB-40 x Catongo. Multivariate analysis showed that stem diameter (CD), total leaf area (TLA), leaf dry biomass (LDB), stem dry biomass (SDB), root dry biomass (RDB), total dry biomass (TDB), root length (RL), root volume (RV), root diameter (RD) <1 mm and 1 <(RD) <2 mm were the most important growth parameters in the separation of T. cacao genotypes in to tolerant and intolerant to soil water deficit.

Electromigration in Sn-Cu intermetallic compounds

NASA Astrophysics Data System (ADS)

Wei, C. C.; Chen, C. F.; Liu, P. C.; Chen, Chih

2009-01-01

As the shrinking in bump size continues, the effect of intermetallic compounds (IMCs) on electromigration becomes more pronounced. Electromigration in Sn-Cu intermetallic compounds was examined using edge displacement method. It was found that Cu6Sn5 compounds are more susceptible to electromigration than Cu3Sn compounds. The lower solidus temperature and higher resistivity of the Cu6Sn5 IMCs are responsible for its higher electromigration rate. Length-dependent electromigration behavior was found in the stripes of various lengths and the critical length was determined to be between 5 and 10 μm at 225 °C, which corresponded to a critical product between 2.5 and 5 A/cm. Furthermore, the Sn-Cu compounds were proven to have better electromigration resistance than eutectic SnAgCu solder.

Silver flip chip interconnect technology and solid state bonding

NASA Astrophysics Data System (ADS)

Sha, Chu-Hsuan

In this dissertation, fluxless transient liquid phase (TLP) bonding and solid state bonding between thermal expansion mismatch materials have been developed using Ag-In binary systems, pure Au, Ag, and Cu-Ag composite. In contrast to the conventional soldering process, fluxless bonding technique eliminates any corrosion and contamination problems caused by flux. Without flux, it is possible to fabricate high quality joints in large bonding areas where the flux is difficult to clean entirely. High quality joints are crucial to bonding thermal expansion mismatch materials since shear stress develops in the bonded pair. Stress concentration at voids in joints could increases breakage probability. In addition, intermetallic compound (IMC) formation between solder and underbump metallurgy (UBM) is essential for interconnect joint formation in conventional soldering process. However, the interface between IMC and solder is shown to be the weak interface that tends to break first during thermal cycling and drop tests. In our solid state bonding technique, there is no IMC involved in the bonding between Au to Au, Ag and Cu, and Ag and Au. All the reliability issues related to IMC or IMC growth is not our concern. To sum up, ductile bonding media, such as Ag or Au, and proper metallic layered structure are utilized in this research to produce high quality joints. The research starts with developing a low temperature fluxless bonding process using electroplated Ag/In/Ag multilayer structures between Si chip and 304 stainless steel (304SS) substrate. Because the outer thin Ag layer effectively protects inner In layer from oxidation, In layer dissolves Ag layer and joints to Ag layer on the to-be-bonded Si chip when temperature reaches the reflow temperature of 166ºC. Joints consist of mainly Ag-rich Ag-In solid solution and Ag2In. Using this fluxless bonding technique, two 304SS substrates can be bonded together as well. From the high magnification SEM images taken at cross-section, there is no void or gap observed. The new bonding technique presented should be valuable in packaging high power electronic devices for high temperature operations. It should also be useful to bond two 304SS parts together at low bonding temperature of 190ºC. Solid state bonding technique is then introduced to bond semiconductor chips, such as Si, to common substrates, such as Cu or alumina, using pure Ag and Au at a temperature matching the typical reflow temperature used in packaging industries, 260°C. In bonding, we realize the possibilities of solid state bonding of Au to Au, Au to Ag, and Ag to Cu. The idea comes from that Cu, Ag, and Au are located in the same column on periodic table, meaning that they have similar electronic configuration. They therefore have a better chance to share electrons. Also, the crystal lattice of Cu, Ag, and Au is the same, face-centered cubic. In the project, the detailed bonding mechanism is beyond the scope and here we determine the bonding by the experimental result. Ag is chosen as the joint material because of its superior physical properties. It has the highest electrical and thermal conductivities among all metals. It has low yield strength and is relatively ductile. Au is considered as well because its excellent ductility and fatigue resistance. Thus, the Ag or Au joints can deform to accommodate the shear strain caused by CTE mismatch between Si and Cu. Ag and Au have melting temperatures higher than 950°C, so the pure Ag or Au joints are expected to sustain in high operating temperature. The resulting joints do not contain any intermetallic compound. Thus, all reliability issues associated with intermetallic growth in commonly used solder joints do not exist anymore. We finally move to the applications of solid state Ag bonding in flip chip interconnects design. At present, nearly all large-scale integrated circuit (IC) chips are packaged with flip-chip technology. This means that the chip is flipped over and the active (front) side is connected to the package using a large number of tiny solder joints, which provide mechanical support, electrical connection, and heat conduction. For chip-to-package level interconnects, a challenge is the severe mismatch in coefficient of thermal expansion (CTE) between chips and package substrates. The interconnect material thus needs to be compliant to deal with the CTE mismatch. At present, nearly all flip-chip interconnects in electronic industries are made of lead-free Sn-based solders. Soft solders are chosen due to high ductility, low yield strength, relatively low melting temperature, and reasonably good electrical and thermal conductivities. In the never ending scaling down trend, more and more transistors are placed on the same Si chip size. This results in larger pin-out numbers and smaller solder joints. According to International Technology Roadmap for Semiconductors (ITRS), by 2018, the pitch in flip-chip interconnects will become smaller than 70mum for high performance applications. Two problems occur. The first is increase in shear strain. The aspect ratio of flip-chip joints is constrained to 0.7 because it goes through molten phase in the reflow process. Therefore, smaller joints become shorter as well, resulting in larger shear strain arising from CTE mismatch between Si chips and package substrates. The second is increase in stress in the joints. Since intermetallic (IMC) thickness in the joint does not scale down with joint size, ratio of IMC thickness to joint height increases. This further enlarges the shear stress because the IMC does not deform as the soft solder does to accommodate CTE mismatch. In this research, the smallest dimension we achieve for Ag flip chip interconnect joint is 15mum in diameter. The ten advantages of Ag flip chip interconnect technology can be identified as (a) High electrical conductivity, 7.7 times of that of Pb-free solders, (b) High thermal conductivity, 5.2 times of that of Pb-free solders, (c) Completely fluxless, (d) No IMCs; all reliability issues associated with IMC and IMC growth do not exist, (e) Ag is very ductile and can manage CTE mismatch between chips and packages, (f) Ag joints can sustain at very high operation temperature because Ag has high melting temperature of 961°C, (g) No molten phase involved; the bump can better keep its shape and geometry, (h) No molten phase involved; bridging of adjacent bumps is less likely to occur, i. Aspect ratio of bumps can be made greater than 1, (j) The size of the bumps is only limited by the lithographic process. Cu-Ag composite flip chip interconnect joints is developed based on three reasons. The first is lower material cost. The second is to strengthen the columns because the yield strength of Cu is 6 times of that of Ag. The third is to avoid possible Ag migration between Ag electrodes under voltage at temperatures above 250°C. This Cu-Ag composite design presents a solution in the path to the scale down roadmap.

Theoretical Investigation of the Thermodynamic Properties of η'-(Cu, Co)6Sn5 Alloys

NASA Astrophysics Data System (ADS)

Wu, Heng; Zhang, Xuechao; Zheng, Bing; Zhao, Xiuchen; Liu, Ying; Li, Hong; Cheng, Jingwei

2018-02-01

We perform theoretical investigations on the structures of η'-Cu6Sn5-based intermetallic compounds (IMCs) with different Co doping concentration (0-12.2 wt.%) based on density functional theory (DFT). The variations of the structural, elastic and thermodynamic properties of (Cu, Co)6Sn5 IMCs with pressure (0-18 GPa) and temperature (0-500 K) are obtained with the application of quasi-harmonic Debye model for the non-equilibrium Gibbs free energy. It is found that the volume of (Cu, Co)6Sn5 shrinks with Co concentration increasing in the range of imposed pressure and temperature. At the same time, the bulk modulus of Cu4Co2Sn5 is the largest among those of Cu6Sn5, Cu5Co1Sn5 and Cu4Co2Sn5. By calculating the Debye temperature of Cu6Sn5, we find that it is higher than that of Cu5Co1Sn5 and Cu4Co2Sn5 when the pressure is higher than 2 GPa. Meanwhile, heat capacities of all three Cu6Sn5, Cu5Co1Sn5, and Cu4Co2Sn5 converge to a near-constant value at about 1090 J/mol K in the range of the imposed pressures.

Reduction of low potential electron acceptors requires the CbcL inner membrane cytochrome of Geobacter sulfurreducens

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zacharoff, Lori; Chan, Chi Ho; Bond, Daniel R.

2015-09-05

The respiration of metals by the bacterium Geobacter sulfurreducens requires electrons generated by metabolism to pass from the interior of the cell to electron acceptors beyond the cell membranes. The G. sulfurreducens inner membrane multiheme c-type cytochrome ImcH is required for respiration to extracellular electron acceptors with redox potentials greater than - 0.1 V vs. SHE, but ImcH is not essential for electron transfer to lower potential acceptors. In contrast, deletion of cbcL, encoding an inner membrane protein consisting of b-type and multiheme c-type cytochrome domains, severely affected reduction of low potential electron acceptors such as Fe(III)-oxides and electrodes poisedmore » at - 0.1 V vs. SHE. Catalytic cyclic voltammetry of a ΔcbcL strain growing on poised electrodes revealed a 50 mV positive shift in driving force required for electron transfer out of the cell. In non-catalytic conditions, low-potential peaks present in wild type biofilms were absent in ΔcbcL mutants. Expression of cbcL in trans increased growth at low redox potential and restored features to cyclic voltammetry. This evidence supports a model where CbcL is a component of a second electron transfer pathway out of the G. sulfurreducens inner membrane that dominates when redox potential is at or below - 0.1 V vs. SHE.« less

Reduction of low potential electron acceptors requires the CbcL inner membrane cytochrome of Geobacter sulfurreducens.

PubMed

Zacharoff, Lori; Chan, Chi Ho; Bond, Daniel R

2016-02-01

The respiration of metals by the bacterium Geobacter sulfurreducens requires electrons generated by metabolism to pass from the interior of the cell to electron acceptors beyond the cell membranes. The G. sulfurreducens inner membrane multiheme c-type cytochrome ImcH is required for respiration to extracellular electron acceptors with redox potentials greater than -0.1 V vs. SHE, but ImcH is not essential for electron transfer to lower potential acceptors. In contrast, deletion of cbcL, encoding an inner membrane protein consisting of b-type and multiheme c-type cytochrome domains, severely affected reduction of low potential electron acceptors such as Fe(III)-oxides and electrodes poised at -0.1 V vs. SHE. Catalytic cyclic voltammetry of a ΔcbcL strain growing on poised electrodes revealed a 50 mV positive shift in driving force required for electron transfer out of the cell. In non-catalytic conditions, low-potential peaks present in wild type biofilms were absent in ∆cbcL mutants. Expression of cbcL in trans increased growth at low redox potential and restored features to cyclic voltammetry. This evidence supports a model where CbcL is a component of a second electron transfer pathway out of the G. sulfurreducens inner membrane that dominates when redox potential is at or below -0.1 V vs. SHE. Copyright © 2015. Published by Elsevier B.V.

User’s Manual for the AFSATCOM Terminal Upgrades Life Cycle Cost Model. Volume I.

DTIC Science & Technology

1981-10-01

EFAIL (I,NS)*TNB(NS) NS *I[LRU(I) + RTS(NHI(I))]*NRTS(I)*DRCT(LO(NS)) + NRTS(NHI(I))*(l - COND(I))*DAD) where TNB(NS) = total number of bases within the...required anywhere in the ATU logistics system, i.e., if it ever fails, and equals 0 otherwise. Computed by: IUT(I) = U( EFAIL (I,NS)) NS IMC = initial depot...I)*XFPR*BRCT + CIMF(NS)* EFAIL (I,B)*NBC(B)LRU(I)*FINC*FPR(I)*XFPR*CRCT B NHB(B)=NS The terms in the equation for TDFPR(I) above account for increases

Membrane-type matrix metalloproteinases mediate curcumin-induced cell migration in non-tumorigenic colon epithelial cells differing in Apc genotype.

PubMed

Fenton, Jenifer I; Wolff, Margaret S; Orth, Michael W; Hord, Norman G

2002-06-01

Colonic epithelial cell migration is required for normal differentiated cell function. This migratory phenotype is dependent upon wild-type adenomatous polyposis coli (Apc) expression. Non-tumorigenic murine colon epithelial cell lines with distinct Apc genotypes, i.e. young adult mouse colon (YAMC; Apc(+/+)) and immortomouse/Min colon epithelial (IMCE; Apc(Min/+) cells) were used to assess the association between the Apc genotype, cell motility and matrix metalloproteinase (MMP) activity. Cells were treated with epidermal growth factor (EGF; 1, 10 and 25 ng/ml), hepatocyte growth factor (HGF; 1, 10 and 25 ng/ml) and/or curcumin (0.1-100 microM). EGF (25 ng/ml) and HGF (25 ng/ml) induced a greater migratory response in YAMC compared with IMCE cells after 24 h (P < 0.05). Treatment with curcumin induced a greater or equivalent migratory response in IMCE than YAMC cells. When migrating cells were treated with Ilomastat (MMP inhibitor), migration was inhibited in both cell types. High concentrations of Ilomastat (25 and 50 microM) inhibited migration in both cell types, while low concentrations (10 microM) inhibited HGF-induced IMCE migration. Curcumin-induced migration was inhibited in both cell types at the highest concentration of Ilomastat (50 microM). Immuno-localization analysis of membrane type-1 (MT1)-MMP indicated that migration is associated with the redistribution of this protein from the endoplasmic reticulum to the plasma membrane. Addition of neutralizing polyclonal antibodies against MT1-MMP or a mixture of MT1, 2- and 3-MMPs demonstrated partial or complete inhibition of cell migration in both cell types, respectively. The data provide the first evidence that migration in non-tumorigenic murine colon epithelial cells is: (i) inducible by EGF and HGF in an Apc genotype-dependent manner, (ii) dependent on MT-MMP activity and (iii) inducible by curcumin in an Apc genotype-independent manner. The data suggest a potential mechanism by which curcumin may induce cells heterozygous for Apc to overcome defective cell migration, a phenotype associated with cell differentiation and apoptosis.

Integrated Airport Surface Operations

NASA Technical Reports Server (NTRS)

Koczo, S.

1998-01-01

The current air traffic environment in airport terminal areas experiences substantial delays when weather conditions deteriorate to Instrument Meteorological Conditions (IMC). Research activity at NASA has culminated in the development, flight test and demonstration of a prototype Low Visibility Landing and Surface Operations (LVLASO) system. A NASA led industry team and the FAA developed the system which integrated airport surface surveillance systems, aeronautical data links, DGPS navigation, automation systems, and controller and flight deck displays. The LVLASO system was demonstrated at the Hartsfield-Atlanta International Airport using a Boeing 757-200 aircraft during August, 1997. This report documents the contractors role in this testing particularly in the area of data link and DGPS navigation.

Effect of laser power on the microstructure and mechanical properties of TiN/Ti3Al composite coatings on Ti6Al4V

NASA Astrophysics Data System (ADS)

Liu, Zhengdao; Zhang, Xiancheng; Xuan, Fuzhen; Wang, Zhengdong; Tu, Shandong

2013-07-01

Laser nitriding is one of the effective techniques to improve the surface properties of titanium alloys and has potential application in the life extension of last-stage steam turbine blades. However, cracking of surface coating is a common problem due to heat concentration in laser nitriding process. Conventionally, the cracks can be avoided through heat treatment, which may have an important influence on the mechanical properties of coating. Crack-free TiN/Ti3Al IMC coatings on Ti6Al4V are prepared by plasma spraying and laser nitriding. The microstructures, phase constitutes and compositions of the coating are observed and analyzed with scanning electron microscopy(SEM), X-ray diffraction(XRD) and X-ray energy-dispersive spectroscopy(EDS). Microhardness, elastic modulus, fracture toughness of the coating are measured. The results show that the crack- and pore-free IMC coatings can be made through the proposed method; with increasing laser power, the amount and density of TiN phase in the coating first increased and then decreased, leading to the similar trend of microhardness and elastic modulus and the reverse trend of fracture toughness of the coating. Both the average microhardness and elastic modulus of the coating increase three times higher than those of the substrate. The volume fraction of the TiN reinforced phase in composite can be controlled by varying the laser power and the cracking problem in laser nitriding process is successfully solved.

Fracture Behaviors of Sn-Cu Intermetallic Compound Layer in Ball Grid Array Induced by Thermal Shock

NASA Astrophysics Data System (ADS)

Shen, Jun; Zhai, Dajun; Cao, Zhongming; Zhao, Mali; Pu, Yayun

2014-02-01

In this work, thermal shock reliability testing and finite-element analysis (FEA) of solder joints between ball grid array components and printed circuit boards with Cu pads were used to investigate the failure mechanism of solder interconnections. The morphologies, composition, and thickness of Sn-Cu intermetallic compounds (IMC) at the interface of Sn-3.0Ag-0.5Cu lead-free solder alloy and Cu substrates were investigated by scanning electron microscopy and transmission electron microscopy. Based on the experimental observations and FEA results, it can be recognized that the origin and propagation of cracks are caused primarily by the difference between the coefficient of thermal expansion of different parts of the packaged products, the growth behaviors and roughness of the IMC layer, and the grain size of the solder balls.

Thrombin products: economic impact of immune-mediated coagulopathies and practical formulary considerations.

PubMed

Voils, Stacy A

2009-07-01

Thrombin has demonstrated utility in aiding surgical hemostasis since its introduction more than 60 years ago. It is used across a wide variety of surgical procedures by virtually every specialty. Only recently have new equally effective and safe products entered the market, causing decision makers to evaluate formulary selection among products with otherwise modest differences. This evaluation includes identifying costs beyond those of acquisition and storage, as well as indirect factors such as monitoring or specialized distribution requirements. One factor to consider specifically in selection of topical thrombin products is the potential for patients to develop an immune-mediated coagulopathy (IMC) after exposure to bovine-derived thrombin. Costs due to adverse drug events fall into the category of indirect costs and, in some instances, can be substantial if bleeding due to IMC occurs.

Physical vapor deposition as a route to hidden amorphous states

PubMed Central

Dawson, Kevin J.; Kearns, Kenneth L.; Yu, Lian; Steffen, Werner; Ediger, M. D.

2009-01-01

Stable glasses of indomethacin (IMC) were prepared by using physical vapor deposition. Wide-angle X-ray scattering measurements were performed to characterize the average local structure. IMC glasses prepared at a substrate temperature of 0.84 Tg (where Tg is the glass transition temperature) and a deposition rate of 0.2 nm/s show a broad, high-intensity peak at low q values that is not present in the supercooled liquid or melt-quenched glasses. When annealed slightly above Tg, the new WAXS pattern transforms into the melt-quenched glass pattern, but only after very long annealing times. For a series of samples prepared at the lowest deposition rate, the new local packing arrangement is present only for deposition temperatures below Tg −20 K, suggesting an underlying first-order liquid-to-liquid phase transition. PMID:19666494

Willingness to Use Microbicides Is Affected by the Importance of Product Characteristics, Use Parameters, and Protective Properties

PubMed Central

Morrow, Kathleen M.; Fava, Joseph L.; Rosen, Rochelle K.; Vargas, Sara; Barroso, Candelaria; Christensen, Anna L.; Woodsong, Cynthia; Severy, Lawrence

2008-01-01

Background Along with efficacy, a microbicide’s acceptability will be integral to its impact on the pandemic. Understanding Product Characteristics that users find most acceptable and determining who will use which type of product are key to optimizing use effectiveness. Objectives To evaluate psychometrically the Important Microbicide Characteristics (IMC) instrument and examine its relationship to willingness to use microbicides. Results Exploratory and confirmatory factor analyses revealed 2 IMC subscales (Cronbach’s coefficient α: Product Characteristics subscale (α = 0.84) and Protective Properties subscale (α = 0.89)). Significant differences on Product Characteristics subscale scores were found for history of douching (P = 0.002) and employment status (P = 0.001). Whether a woman used a method to prevent pregnancy or sexually transmitted disease (STD) in the last 3 months (P < 0.001) and whether she used a condom during the last vaginal sex episode (P < 0.001) were significantly related to her rating of the importance of microbicides being contraceptive. Product Characteristics (r = 0.21) and Protective Properties (r = 0.27) subscale scores and whether a microbicide had contraceptive properties (r = 0.24) were all significantly associated (P < 0.001) with willingness to use microbicides. Conclusions Formulation and use characteristics and product function(s) affect willingness to use microbicides and should continue to be addressed in product development. The IMC instrument serves as a template for future studies of candidate microbicides. PMID:17325607

Effect of Epoxy on Mechanical Property of SAC305 Solder Joint with Various Surface Finishes Under 3-Point Bend Test.

PubMed

Jeong, Haksan; Myung, Woo-Ram; Sung, Yong-Gue; Kim, Kyung-Yeol; Jung, Seung-Boo

2018-09-01

Microstructures and mechanical property of Sn-3.0Ag-0.5Cu (SAC305) and epoxy Sn-3.0Ag-0.5Cu (epoxy SAC) solder joints were investigated with various surface finishes; organic solderability preservative (OSP), electroless nickel immersion gold (ENIG) and electroless nickel electroless palladium immersion gold (ENEPIG). Bending property of solder joints was evaluated by 3-point bend test method. Microstructure and chemical composition of solder joints was characterized by scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDX), respectively. Epoxy did not effect on intermetallic compound (IMC) morphology. Scalloped shaped Cu6Sn5 IMC was observed at OSP surface finish. Chunky-like shaped and needle-like shaped (Ni,Cu)6Sn5 IMC were observed at the solder/ENIG joint and solder/ENEPIG joint, respectively. The bending cycles of SAC305/OSP joint, SAC305/ENIG joints and SAC305/ENEPIG joints were 720, 440 and 481 cycle numbers. The bending cycles of epoxy SAC and three types surface finished solder joints were over 1000 bending cycles. Under OSP surface finish, bending cycles of epoxy SAC solder was approximately 1.5 times higher than those of SAC305 solder joint. Bending cycles of epoxy SAC solder was over twice times higher than those of SAC305 solder with ENIG and ENEPIG surface finishes. The bending property of epoxy solder joint was enhanced due to epoxy fillet held the solder joint.

General Aviation Flight Test of Advanced Operations Enabled by Synthetic Vision

NASA Technical Reports Server (NTRS)

Glaab, Louis J.; Hughhes, Monica F.; Parrish, Russell V.; Takallu, Mohammad A.

2014-01-01

A flight test was performed to compare the use of three advanced primary flight and navigation display concepts to a baseline, round-dial concept to assess the potential for advanced operations. The displays were evaluated during visual and instrument approach procedures including an advanced instrument approach resembling a visual airport traffic pattern. Nineteen pilots from three pilot groups, reflecting the diverse piloting skills of the General Aviation pilot population, served as evaluation subjects. The experiment had two thrusts: 1) an examination of the capabilities of low-time (i.e., <400 hours), non-instrument-rated pilots to perform nominal instrument approaches, and 2) an exploration of potential advanced Visual Meteorological Conditions (VMC)-like approaches in Instrument Meteorological Conditions (IMC). Within this context, advanced display concepts are considered to include integrated navigation and primary flight displays with either aircraft attitude flight directors or Highway In The Sky (HITS) guidance with and without a synthetic depiction of the external visuals (i.e., synthetic vision). Relative to the first thrust, the results indicate that using an advanced display concept, as tested herein, low-time, non-instrument-rated pilots can exhibit flight-technical performance, subjective workload and situation awareness ratings as good as or better than high-time Instrument Flight Rules (IFR)-rated pilots using Baseline Round Dials for a nominal IMC approach. For the second thrust, the results indicate advanced VMC-like approaches are feasible in IMC, for all pilot groups tested for only the Synthetic Vision System (SVS) advanced display concept.

Ultrasonic soldering of Cu alloy using Ni-foam/Sn composite interlayer.

PubMed

Xiao, Yong; Wang, Qiwei; Wang, Ling; Zeng, Xian; Li, Mingyu; Wang, Ziqi; Zhang, Xingyi; Zhu, Xiaomeng

2018-07-01

In this study, Cu alloy joints were fabricated with a Ni-foam reinforced Sn-based composite solder with the assistance of ultrasonic vibration. Effects of ultrasonic soldering time on the microstructure and mechanical properties of Cu/Ni-Sn/Cu joints were investigated. Results showed that exceptional metallurgic bonding could be acquired with the assistance of ultrasonic vibration using a self-developed Ni-foam/Sn composite solder. For joint soldered for 5 s, a (Cu,Ni) 6 Sn 5 intermetallic compound (IMC) layer was formed on the Cu substrate surface, Ni skeletons distributed randomly in the soldering seam and a serrated (Ni,Cu) 3 Sn 4 IMC layer was formed on the Ni skeleton surface. Increasing the soldering time to 20 s, the (Ni,Cu) 3 Sn 4 IMC layer grew significantly and exhibited a loose porous structure on the Ni skeleton surface. Further increase the soldering time to 30 s, Ni skeletons were largely dissolved in the Sn base solder, and micro-sized (Ni,Cu) 3 Sn 4 particles were formed and dispersed homogeneously in the soldering seam. The formation of (Ni,Cu) 3 Sn 4 particles was mainly ascribed to acoustic cavitations induced erosion and grain refining effects. The joint soldered for 30 s exhibited the highest shear strength of 64.9 ± 3.3 MPa, and the shearing failure mainly occurred at the soldering seam/Cu substrate interface. Copyright © 2018 Elsevier B.V. All rights reserved.

Properties of Sn3.8Ag0.7Cu Solder Alloy with Trace Rare Earth Element Y Additions

NASA Astrophysics Data System (ADS)

Hao, H.; Tian, J.; Shi, Y. W.; Lei, Y. P.; Xia, Z. D.

2007-07-01

In the current research, trace rare earth (RE) element Y was incorporated into a promising lead-free solder, Sn3.8Ag0.7Cu, in an effort to improve the comprehensive properties of Sn3.8Ag0.7Cu solder. The range of Y content in Sn3.8Ag0.7Cu solder alloys varied from 0 wt.% to 1.0 wt.%. As an illustration of the advantage of Y doping, the melting temperature, wettability, mechanical properties, and microstructures of Sn3.8Ag0.7CuY solder were studied. Trace Y additions had little influence on the melting behavior, but the solder showed better wettability and mechanical properties, as well as finer microstructures, than found in Y-free Sn3.8Ag0.7Cu solder. The Sn3.8Ag0.7Cu0.15Y solder alloy exhibited the best comprehensive properties compared to other solders with different Y content. Furthermore, interfacial and microstructural studies were conducted on Sn3.8Ag0.7Cu0.15Y solder alloys, and notable changes in microstructure were found compared to the Y-free alloy. The thickness of an intermetallic compound layer (IML) was decreased during soldering, and the growth of the IML was suppressed during aging. At the same time, the growth of intermetallic compounds (IMCs) inside the solder was reduced. In particular, some bigger IMC plates were replaced by fine, granular IMCs.

Risk factors for postoperative CSF leakage after elective craniotomy and the efficacy of fleece-bound tissue sealing against dural suturing alone: a randomized controlled trial.

PubMed

Hutter, Gregor; von Felten, Stefanie; Sailer, Martin H; Schulz, Marianne; Mariani, Luigi

2014-09-01

Cerebrospinal fluid leakage is an immanent risk of cranial surgery with dural opening. Recognizing the risk factors for this complication and improving the technique of dural closure may reduce the associated morbidity and its surgical burden. The aim of this paper was to investigate whether the addition of TachoSil on top of the dural suture reduces postoperative CSF leakage compared with dural suturing alone and to assess the frequency and risk factors for dural leakage and potentially related complications after elective craniotomy. The authors conducted a prospective, randomized, double-blinded single-center trial in patients undergoing elective craniotomy with dural opening. They compared their standard dural closure by running suture alone (with the use of a dural patch if needed) to the same closure with the addition of TachoSil on top of the suture. The primary end point was the incidence of CSF leakage, defined as CSF collection or any open CSF fistula within 30 days. Secondary end points were the incidence of infection, surgical revision, and length of stay in the intensive care unit (ICU) or intermediate care (IMC) unit. The site of craniotomy, a history of diabetes mellitus, a diagnosis of meningioma, the intraoperative need of a suturable dural substitute, and blood parameters were assessed as potential risk factors for CSF leakage. The authors enrolled 241 patients, of whom 229 were included in the analysis. Cerebrospinal fluid leakage, mostly self-limiting subgaleal collections, occurred in 13.5% of patients. Invasive treatment was performed in 8 patients (3.5%) (subgaleal puncture in 6, lumbar drainage in 1, and surgical revision in 1 patient). Diabetes mellitus, a higher preoperative level of C-reactive protein (CRP), and the intraoperative need for a dural patch were positively associated with the occurrence of the primary end point (p = 0.014, 0.01, and 0.049, respectively). Cerebrospinal fluid leakage (9.7% vs 17.2%, OR 0.53 [95% CI 0.23-1.15], p = 0.108) and infection (OR 0.18 [95% CI 0.01-1.18], p = 0.077) occurred less frequently in the study group than in the control group. TachoSil significantly reduced the probability of staying in the IMC unit for 1 day or longer (OR 0.53 [95% CI 0.27-0.99], p = 0.048). Postoperative epidural hematoma and empyema occurred in the control group but not in the study group. Dural leakage after elective craniotomy/durotomy occurs more frequently in association with diabetes mellitus, elevated preoperative CRP levels, and the intraoperative need of a dural patch. This randomized controlled trial showed no statistically significant reduction of postoperative CSF leakage and surgical site infections upon addition of TachoSil on the dural suture, but there was a significant reduction in the length of stay in the IMC unit. Dural augmentation with TachoSil was safe and not related to adverse events. Clinical trial registration no. NCT00999999 ( http://www.ClinicalTrials.gov ).

Survey Satisficing Inflates Stereotypical Responses in Online Experiment: The Case of Immigration Study

PubMed Central

Miura, Asako; Kobayashi, Tetsuro

2016-01-01

Though survey satisficing, grudging cognitive efforts required to provide optimal answers in the survey response process, poses a serious threat to the validity of online experiments, a detailed explanation of the mechanism has yet to be established. Focusing on attitudes toward immigrants, we examined the mechanism by which survey satisficing distorts treatment effect estimates in online experiments. We hypothesized that satisficers would display more stereotypical responses than non-satisficers would when presented with stereotype-disconfirming information about an immigrant. Results of two experiments largely supported our hypotheses. Satisficers, whom we identified through an instructional manipulation check (IMC), processed information about immigrants' personality traits congruently with the stereotype activated by information provided about nationality. The significantly shorter vignette reading time of satisficers corroborates their time-efficient impression formation based on stereotyping. However, the shallow information processing of satisficers can be rectified by alerting them to their inattentiveness through use of a repeated IMC. PMID:27803680

COMPARISON OF MONTE CARLO METHODS FOR NONLINEAR RADIATION TRANSPORT

DOE Office of Scientific and Technical Information (OSTI.GOV)

W. R. MARTIN; F. B. BROWN

2001-03-01

Five Monte Carlo methods for solving the nonlinear thermal radiation transport equations are compared. The methods include the well-known Implicit Monte Carlo method (IMC) developed by Fleck and Cummings, an alternative to IMC developed by Carter and Forest, an ''exact'' method recently developed by Ahrens and Larsen, and two methods recently proposed by Martin and Brown. The five Monte Carlo methods are developed and applied to the radiation transport equation in a medium assuming local thermodynamic equilibrium. Conservation of energy is derived and used to define appropriate material energy update equations for each of the methods. Details of the Montemore » Carlo implementation are presented, both for the random walk simulation and the material energy update. Simulation results for all five methods are obtained for two infinite medium test problems and a 1-D test problem, all of which have analytical solutions. Conclusions regarding the relative merits of the various schemes are presented.« less

Microstructure and mechanical properties of friction stir lap welded Mg/Al joint assisted by stationary shoulder

NASA Astrophysics Data System (ADS)

Ji, Shude; Li, Zhengwei

2017-11-01

Using magnesium alloy as upper sheet, 3 mm-thick AZ31 magnesium alloy and 6061 aluminum alloy were joined using friction stir lap welding assisted by stationary shoulder. The effects of tool rotating speed on cross-sections, microstructure and mechanical properties of Mg/Al lap joints were mainly discussed. Results showed that stationary shoulder contributed to joint formation, by which stir zones (SZ) were characterized by big onion rings after welding. Because of the big forging force exerted by stationary shoulder, the upper region of hook was well bonded. SZ showed much higher hardness because of intermetallic compounds (IMCs). The bonding conditions at the base material (BM)/SZ interface at advancing side and the hook region played important roles on joint lap shear properties. The X-ray diffraction pattern analysis revealed that the main IMCs were Al3Mg2 and Al12Mg17.

Nonsteroidal anti-inflammatory drugs, aspirin, and cognitive function in the Baltimore longitudinal study of aging.

PubMed

Waldstein, Shari R; Wendell, Carrington Rice; Seliger, Stephen L; Ferrucci, Luigi; Metter, E Jeffrey; Zonderman, Alan B

2010-01-01

To examine the relations between the use of nonaspirin, nonsteroidal anti-inflammatory drugs (NSAIDs) and aspirin and age-related change in multiple domains of cognitive function in community-dwelling individuals without dementia. Longitudinal, with measures obtained on one to 18 occasions over up to 45 years. General community. A volunteer sample of up to 2,300 participants from the Baltimore Longitudinal Study of Aging free of diagnosed dementia. At each visit, reported NSAID or aspirin use (yes/no) and tests of verbal and visual memory, attention, perceptuo-motor speed, confrontation naming, executive function, and mental status. Mixed-effects regression models revealed that NSAID use was associated with less prospective decline on the Blessed Information-Memory-Concentration (I-M-C) Test, a mental status test weighted for memory and concentration (P<.001), and Part B of the Trail Making Test, a test of perceptuo-motor speed and mental flexibility (P<.05). In contrast, aspirin use was related to greater prospective decline on the Blessed I-M-C Test (P<.05) and the Benton Visual Retention Test, a test of visual memory (P<.001). Consistent with studies of incident dementia, NSAID users without dementia displayed less prospective decline in cognitive function, but on only two cognitive measures. In contrast, aspirin use was associated with greater prospective cognitive decline on select measures, potentially reflecting its common use for vascular disease prophylaxis. Effect sizes were small, calling into question clinical significance, although overall public health significance may be meaningful.

Mechanical Deformation Behavior of Sn-Ag-Cu Solders with Minor Addition of 0.05 wt.% Ni

NASA Astrophysics Data System (ADS)

Hammad, A. E.; El-Taher, A. M.

2014-11-01

The aim of the present work is to develop a comparative evaluation of the microstructural and mechanical deformation behavior of Sn-Ag-Cu (SAC) solders with the minor addition of 0.05 wt.% Ni. Test results showed that, by adding 0.05Ni element into SAC solders, generated mainly small rod-shaped (Cu,Ni)6Sn5 intermetallic compounds (IMCs) inside the β-Sn phase. Moreover, increasing the Ag content and adding Ni could result in the change of the shape and size of the IMC precipitate. Hence, a significant improvement is observed in the mechanical properties of SAC solders with increasing Ag content and Ni addition. On the other hand, the tensile results of Ni-doped SAC solders showed that both the yield stress and ultimate tensile strengths decrease with increasing temperature and with decreasing strain rate. This behavior was attributed to the competing effects of work hardening and dynamic recovery processes. The Sn-2.0Ag-0.5Cu-0.05Ni solder displayed the highest mechanical properties due to the formation of hard (Cu,Ni)6Sn5 IMCs. Based on the obtained stress exponents and activation energies, it is suggested that the dominant deformation mechanism in SAC (205)-, SAC (0505)- and SAC (0505)-0.05Ni solders is pipe diffusion, and lattice self-diffusion in SAC (205)-0.05Ni solder. In view of these results, the Sn-2.0Ag-0.5Cu-0.05Ni alloy is a more reliable solder alloy with improved properties compared with other solder alloys tested in the present work.

Efficacy and safety of liquid nitrogen cryotherapy for treatment of Barrett’s esophagus

PubMed Central

Suchniak-Mussari, Kristen; Dye, Charles E; Moyer, Matthew T; Mathew, Abraham; McGarrity, Thomas J; Gagliardi, Eileen M; Maranki, Jennifer L; Levenick, John M

2017-01-01

AIM To evaluate the efficacy and safety of liquid nitrogen cryotherapy as a primary or rescue treatment for BE, with and without dysplasia, or intramucosal adenocarcinoma (IMC). METHODS This was a retrospective, single-center study carried out in a tertiary care center including 45 patients with BE who was treatment-naïve or who had persistent intestinal metaplasia (IM), dysplasia, or IMC despite prior therapy. Barrett’s mucosa was resected via EMR when clinically appropriate, then patients underwent cryotherapy until eradication or until deemed to have failed treatment. Surveillance biopsies were taken at standard intervals. RESULTS From 2010 through 2014, 33 patients were studied regarding the efficacy of cryotherapy. Overall, 29 patients (88%) responded to cryotherapy, with 84% having complete regression of all dysplasia and cancer. Complete eradication of cancer and dysplasia was seen in 75% of subjects with IMC; the remaining two subjects did not respond to cryotherapy. Following cryotherapy, 15 patients with high-grade dysplasia (HGD) had 30% complete regression, 50% IM, and 7% low-grade dysplasia (LGD); one subject had persistent HGD. Complete eradication of dysplasia occurred in all 5 patients with LGD. In 5 patients with IM, complete regression occurred in 4, and IM persisted in one. In 136 cryotherapy sessions amongst 45 patients, adverse events included chest pain (1%), stricture (4%), and one gastrointestinal bleed in a patient on dual antiplatelet therapy who had previously undergone EMR. CONCLUSION Cryotherapy is an efficacious and safe treatment modality for Barrett’s esophagus with and without dysplasia or intramucosal adenocarcinoma. PMID:28979713

A Study on the Physical Properties and Interfacial Reactions with Cu Substrate of Rapidly Solidified Sn-3.5Ag Lead-Free Solder

NASA Astrophysics Data System (ADS)

Ma, Hai-Tao; Wang, Jie; Qu, Lin; Zhao, Ning; Kunwar, A.

2013-08-01

A rapidly solidified Sn-3.5Ag eutectic alloy produced by the melt-spinning technique was used as a sample in this research to investigate the microstructure, thermal properties, solder wettability, and inhibitory effect of Ag3Sn on Cu6Sn5 intermetallic compound (IMC). In addition, an as-cast Sn-3.5Ag solder was prepared as a reference. Rapidly solidified and as-cast Sn-3.5Ag alloys of the same size were soldered at 250°C for 1 s to observe their instant melting characteristics and for 3 s with different cooling methods to study the inhibitory effect of Ag3Sn on Cu6Sn5 IMC. Experimental techniques such as scanning electron microscopy, differential scanning calorimetry, and energy-dispersive spectrometry were used to observe and analyze the results of the study. It was found that rapidly solidified Sn-3.5Ag solder has more uniform microstructure, better wettability, and higher melting rate as compared with the as-cast material; Ag3Sn nanoparticles that formed in the rapidly solidified Sn-3.5Ag solder inhibited the growth of Cu6Sn5 IMC during aging significantly much strongly than in the as-cast material because their number in the rapidly solidified Sn-3.5Ag solder was greater than in the as-cast material with the same soldering process before aging. Among the various alternative lead-free solders, this study focused on comparison between rapidly solidified and as-cast solder alloys, with the former being observed to have better properties.

Cloud statistics over the Indonesian Maritime Continent during the first and second CPEA campaigns

NASA Astrophysics Data System (ADS)

Marzuki; Vonnisa, Mutya; Rahayu, Aulya; Hashiguchi, Hiroyuki

2017-06-01

Improvement of precipitation prediction requires an understanding of the organization mechanism, such as the initiation and evolution of organized convective systems. This paper is a follow-up of a previous study on cloud propagation over the Indonesian Maritime Continent (IMC). Here, the infrared blackbody brightness temperature data is analyzed. A comprehensive cloud statistics model, including span, speed, duration, all possible directions, and size was estimated by applying the modified tracking reflectivity echoes by correlation (TREC) method to time-latitude-longitude space. Comparisons were made to cloud statistics during the first and second campaigns of Coupling Processes in the Equatorial Atmosphere, hereinafter called CPEA-I and CPEA-II. Although the two campaigns were conducted in different monsoon seasons, the cloud propagation directions during each campaign were similar. The cloud systems moved in most directions, except north and east, and preferred southwestward, westward and northwestward movements. Thus, westward-moving clouds were more dominant than eastward-moving clouds, in agreement with previous studies. This feature is consistent with the prevailing easterly wind in the middle and upper troposphere despite the difference in low-level wind during each campaign. The two campaign periods were different due to the phase of the Madden-Julian Oscillation (MJO). CPEA-I took place over the active MJO phase, with larger-sized clouds than CPEA-II. Thus, the MJO had an enormous impact on cloud size, but such an impact was not significantly observed in the speed, lifetime, span and direction of propagation. In the two campaigns, clouds moved with a speed of 3-30 m s-1 and in duration from a few hours to longer than one day. Clouds with long spans and high speeds were generally observed during the strong vertical shear of horizontal winds. In contrast, clouds with short spans and low speeds were found in the more varied environment of the IMC, but were dominant over land, which may have been associated with the diurnal heating cycle. Finally, the present results showed more complex behavior than a previous study in the Bay of Bengal, indicating precipitation mechanisms over the IMC including interactions between large-scale atmospheric phenomena (e.g., monsoon and MJO) with the diurnal precipitation cycles.

Does the Attention Deficit Hyperactivity Disorder interfere with bariatric surgery results?

PubMed

Marchesi, Doglas Gobbi; Ciriaco, Jovana Gobbi Marchesi; Miguel, Gustavo Peixoto Soares; Batista, Gustavo Adolfo Pavan; Cabral, Camila Pereira; Fraga, Larissa Carvalho

2017-01-01

to analyze possible negative effects of Attention Deficit Hyperactivity Disorder (ADHD) on the success of bariatric surgery. we evaluated forty patients undergoing bariatric surgery and with regular post-operative follow-up of at least one year. To all, we applied the questionnaire advocated in the fourth edition of the Diagnostic and Statistical Manual (DSM-IV) of the American Psychiatric Association for ADHD, as well as analyzed their postoperative data. fifteen (38%) patients presented a positive questionnaire for ADHD. Patients with ADHD presented higher BMI than patients without the disorder (45.8 vs. 40.9 kg/m2, p=0.017), and the difference remained in all postoperative stages. There was no statistically significant difference in surgery success (33.3% x 66.7%, p=0.505) or in BMI reduction (30.71% x 31.88%, p=0.671) one year after the procedure. ADHD patients have a higher BMI. However, the presence of ADHD does not influence the success of bariatric surgery and the reduction of BMI. analisar possíveis efeitos negativos do Transtorno do Déficit de Atenção e Hiperatividade (TDAH) no sucesso da cirurgia bariátrica. foram avaliados 40 pacientes submetidos à cirurgia bariátrica e com acompanhamento pós-operatório regular mínimo de um ano. Todos foram submetidos ao questionário preconizado na quarta edição do Diagnostic and Statistical Manual (DSM-IV) da Associação Americana de Psiquiatria para TDAH e analisados os dados pós operatórios. : quinze (38%) pacientes apresentaram questionário positivo para TDAH. Os pacientes com TDAH apresentaram IMC maior do que os pacientes sem o transtorno (45,8x40,9 Kg/m2; p=0,017), mantendo-se a diferença em todas as etapas do pós-operatório. Não foi encontrada diferença estatisticamente significativa no sucesso da cirurgia (33,3% x 66,7%; p=0,505), e na redução do IMC (30,71% x 31,88%; p=0,671) após um ano do procedimento. : pacientes com TDAH apresentam maior IMC, entretanto, a presença do TDAH não apresenta influência no sucesso da cirurgia bariátrica e na redução do IMC.

Mechanical Reliability of the Epoxy Sn-58wt.%Bi Solder Joints with Different Surface Finishes Under Thermal Shock

NASA Astrophysics Data System (ADS)

Sung, Yong-Gue; Myung, Woo-Ram; Jeong, Haksan; Ko, Min-Kwan; Moon, Jeonghoon; Jung, Seung-Boo

2018-04-01

The effect of thermal shock on the mechanical reliability of epoxy Sn-58wt.%Bi composite (epoxy Sn-58wt.%Bi) solder joints was investigated with different surface-finished substrates. Sn-58wt.%Bi-based solder has been considered as a promising candidate for low-temperature solder among various lead-free solders. However, Sn-58wt.%Bi solder joints can be easily broken under impact conditions such as mechanical shock, drop tests, and bending tests because of their poor ductility. Therefore, previous researchers have tried to improve the mechanical property of Sn-58wt.%Bi solder by additional elements and mixtures of metal powder and epoxy resin. Epoxy Sn-58wt.%Bi solder paste was fabricated by mixing epoxy resin and Sn-58wt.%Bi solder powder to enhance the mechanical reliability of Sn-58wt.%Bi solder joints. The epoxy Sn-58wt.%Bi solder paste was screen-printed onto various printed circuit board surfaces finished with organic solder preservatives (OSP), electroless nickel immersion gold (ENIG), and electroless nickel electroless palladium immersion gold (ENEPIG). The test components were prepared by a reflow process at a peak temperature of 190°C. The thermal shock test was carried out under the temperature range of - 40 to 125°C to evaluate the reliability of Sn-58wt.%Bi and epoxy Sn-58wt.%Bi solder joints. The OSP-finished sample showed a relatively higher mechanical property than those of ENIG and ENEPIG after thermal shock. The average number of cycles for epoxy Sn-58wt.%Bi solder with the OSP surface finish were 6 times higher than that for Sn-58wt.%Bi solder with the same finish. The microstructures of the solder joints were investigated by scanning electron microscopy, and the composition of the intermetallic compound (IMC) layer was analyzed by using energy dispersive spectrometry. Cu6Sn5 IMC was formed by the reaction between Sn-58wt.%Bi solder and a OSP surface-finished Cu after the reflow process. Ni3Sn4 IMC and (Ni, Pd)3Sn4 IMC were formed at the solder joints between the ENIG and solder, and between ENEPIG surface finish and solders, respectively.

Mechanical Reliability of the Epoxy Sn-58wt.%Bi Solder Joints with Different Surface Finishes Under Thermal Shock

NASA Astrophysics Data System (ADS)

Sung, Yong-Gue; Myung, Woo-Ram; Jeong, Haksan; Ko, Min-Kwan; Moon, Jeonghoon; Jung, Seung-Boo

2018-07-01

The effect of thermal shock on the mechanical reliability of epoxy Sn-58wt.%Bi composite (epoxy Sn-58wt.%Bi) solder joints was investigated with different surface-finished substrates. Sn-58wt.%Bi-based solder has been considered as a promising candidate for low-temperature solder among various lead-free solders. However, Sn-58wt.%Bi solder joints can be easily broken under impact conditions such as mechanical shock, drop tests, and bending tests because of their poor ductility. Therefore, previous researchers have tried to improve the mechanical property of Sn-58wt.%Bi solder by additional elements and mixtures of metal powder and epoxy resin. Epoxy Sn-58wt.%Bi solder paste was fabricated by mixing epoxy resin and Sn-58wt.%Bi solder powder to enhance the mechanical reliability of Sn-58wt.%Bi solder joints. The epoxy Sn-58wt.%Bi solder paste was screen-printed onto various printed circuit board surfaces finished with organic solder preservatives (OSP), electroless nickel immersion gold (ENIG), and electroless nickel electroless palladium immersion gold (ENEPIG). The test components were prepared by a reflow process at a peak temperature of 190°C. The thermal shock test was carried out under the temperature range of - 40 to 125°C to evaluate the reliability of Sn-58wt.%Bi and epoxy Sn-58wt.%Bi solder joints. The OSP-finished sample showed a relatively higher mechanical property than those of ENIG and ENEPIG after thermal shock. The average number of cycles for epoxy Sn-58wt.%Bi solder with the OSP surface finish were 6 times higher than that for Sn-58wt.%Bi solder with the same finish. The microstructures of the solder joints were investigated by scanning electron microscopy, and the composition of the intermetallic compound (IMC) layer was analyzed by using energy dispersive spectrometry. Cu6Sn5 IMC was formed by the reaction between Sn-58wt.%Bi solder and a OSP surface-finished Cu after the reflow process. Ni3Sn4 IMC and (Ni, Pd)3Sn4 IMC were formed at the solder joints between the ENIG and solder, and between ENEPIG surface finish and solders, respectively.

ASSESSMENT OF BODY FAT IN OBESE PATIENTS PREOPERATIVELY FOR BARIATRIC SURGERY.

PubMed

Fernandez, Mônica; Toimil, Rosana Farah; Rasslan, Zied; Ilias, Elias Jirjoss; Gradinar, Ana Lúcia Torloni; Malheiros, Carlos Alberto

The study of body composition in patient candidates for bariatric surgery is directly related to the increase and distribution of body fat in the development of cardiovascular disease. To correlate anthropometric indicators and bioelectrical impedance in the assessment of body fat in female candidates for bariatric surgery. Cross-sectional, observational study of 88 women. The weight, height, body mass index and waist circumference data were evaluated in the anthropometric analysis. The body fat was determinate by bioelectrical impedance conducted according to the manufacturer´s recommended technique with a specific severe obesity formula. The patients were divided into two subgroups according to the average waist circumference and body mass index for better analysis of the results. The group had a mean age of 39.7 years (±7.2), average weight of 125.6 kg (±16.2), mean body mass index of 48.7 kg/m2 (±6.4) and the mean waist circumference 137.6 cm (±12.4). Negative and significant relationship between BMI values waist circumference and resistance obtained by bioelectrical impedance ​​were found. By analyzing the two groups the mean BMI and waist circumference, a significant relationship was observed, ie, the higher the degree of obesity less resistance was obtained by bioelectrical impedance. The higher is the obesity the lower is value found for resistance. The increase of anthropometric indicators (BMI and waist circumference) determined reduction in resistance and reactance obtained by bioelectrical impedance analysis in obese women candidates to bariatric surgery. O estudo da composição corporal em pacientes candidatas à cirurgia bariátrica tem relação direta com o aumento e distribuição da gordura corporal e no desenvolvimento de doenças cardiovasculares. Estudar a correlação entre indicadores antropométricos e da bioimpedância elétrica na avaliação da gordura corporal em mulheres candidatas à cirurgia bariátrica. Estudo transversal, observacional com 88 pacientes. Na análise antropométrica foram avaliados os dados de peso, altura, IMC e circunferência da cintura. Para bioimpedância elétrica utilizou-se a técnica recomendada pelo fabricante do aparelho e fórmula específica para obeso grave na determinação da gordura corporal. Para melhor análise dos resultados as pacientes foram divididas em dois subgrupos de acordo com a média de circunferência da cintura e IMC. O grupo apresentou média de idade 39,7 anos (±7,2), média de peso 125,6 kg (±16,2), média de IMC 48,7 kg/m2 (±6,4) e média de circunferência da cintura 137,6 cm (±12,4). Foram encontradas relações negativas e significativas entre os valores de IMC, circunferência da cintura e a resistência obtida através da bioimpedância elétrica. Ao analisar os dois subgrupos de valores médios de IMC e circunferência da cintura, observou-se relação significativa, ou seja, quanto maior o grau de obesidade menor é a resistência obtida através da bioimpedância elétrica. O aumento dos indicadores antropométricos (IMC e circunferência da cintura) determinaram redução nas variáveis resistência e reatância obtidas pela bioimpedância elétrica em mulheres candidatas à cirurgia bariátrica.

Exopolysaccharides regulate calcium flow in cariogenic biofilms

PubMed Central

Varenganayil, Muth M.; Decho, Alan W.

2017-01-01

Caries-associated biofilms induce loss of calcium from tooth surfaces in the presence of dietary carbohydrates. Exopolysaccharides (EPS) provide a matrix scaffold and an abundance of primary binding sites within biofilms. The role of EPS in binding calcium in cariogenic biofilms is only partially understood. Thus, the aim of the present study is to investigate the relationship between the calcium dissolution rates and calcium tolerance of caries-associated bacteria and yeast as well as to examine the properties of EPS to quantify its binding affinity for dissolved calcium. Calcium dissolution was measured by dissolution zones on Pikovskaya’s agar. Calcium tolerance was assessed by isothermal microcalorimetry (IMC) by adding CaCl2 to the bacterial cultures. Acid-base titration and Fourier transform infrared (FTIR) spectroscopy were used to identify possible functional groups responsible for calcium binding, which was assessed by isothermal titration calorimetry (ITC). Lactobacillus spp. and mutans streptococci demonstrated calcium dissolution in the presence of different carbohydrates. All strains that demonstrated high dissolution rates also revealed higher rates of calcium tolerance by IMC. In addition, acidic functional groups were predominantly identified as possible binding sites for calcium ions by acid-base titration and FTIR. Finally, ITC revealed EPS to have a higher binding affinity for calcium compared, for example, to lactic acid. In conclusion, this study illustrates the role of EPS in terms of the calcium tolerance of cariogenic microbiota by determining the ability of EPS to control free calcium concentrations within the biofilms as a self-regulating mode of action in the pathogenesis of dental caries. PMID:29023506

Redox potential as a master variable controlling pathways of metal reduction by Geobacter sulfurreducens

PubMed Central

Levar, Caleb E; Hoffman, Colleen L; Dunshee, Aubrey J; Toner, Brandy M; Bond, Daniel R

2017-01-01

Geobacter sulfurreducens uses at least two different pathways to transport electrons out of the inner membrane quinone pool before reducing acceptors beyond the outer membrane. When growing on electrodes poised at oxidizing potentials, the CbcL-dependent pathway operates at or below redox potentials of –0.10 V vs the standard hydrogen electrode, whereas the ImcH-dependent pathway operates only above this value. Here, we provide evidence that G. sulfurreducens also requires different electron transfer proteins for reduction of a wide range of Fe(III)- and Mn(IV)-(oxyhydr)oxides, and must transition from a high- to low-potential pathway during reduction of commonly studied soluble and insoluble metal electron acceptors. Freshly precipitated Fe(III)-(oxyhydr)oxides could not be reduced by mutants lacking the high-potential pathway. Aging these minerals by autoclaving did not change their powder X-ray diffraction pattern, but restored reduction by mutants lacking the high-potential pathway. Mutants lacking the low-potential, CbcL-dependent pathway had higher growth yields with both soluble and insoluble Fe(III). Together, these data suggest that the ImcH-dependent pathway exists to harvest additional energy when conditions permit, and CbcL switches on to allow respiration closer to thermodynamic equilibrium conditions. With evidence of multiple pathways within a single organism, the study of extracellular respiration should consider not only the crystal structure or solubility of a mineral electron acceptor, but rather the redox potential, as this variable determines the energetic reward affecting reduction rates, extents, and final microbial growth yields in the environment. PMID:28045456

Money and Morale

ERIC Educational Resources Information Center

Meyers, Richard S.

1970-01-01

What do you do as a media specialist to raise the salary level of your IMC Technicians (as defined in Standards for School Media Program") when you feel that they are being underpaid?" The problems involved are considered, and some suggestions are provided. (Author/LS)

FloCon 2011 Proceedings

DTIC Science & Technology

2011-01-01

and G. Armitage. Dening and evaluating greynets (sparse darknets ). In LCN󈧉: Proceedings of the IEEE Conference on Local Computer Networks 30th...analysis of distributed darknet trac. In IMC󈧉: Proceedings of the USENIX/ACM Internet Measurement Conference, 2005. Indexing Full Packet Capture Data

The Instructional Media Center at South Dakota State University.

ERIC Educational Resources Information Center

Sheeley, Gary

1994-01-01

Describes the Instructional Media Center (IMC) at South Dakota State University. Highlights include its mission and goals; staff--professional, career service employees and student assistants; four service groups--instructional technologies, media production, instructional telecommunications, and media resources; budget; and successes. (AEF)

Western Illinois University Curriculum Revitalization Project. Final Report 1990-91.

ERIC Educational Resources Information Center

Western Illinois Univ., Macomb.

The primary purpose of the Curriculum Revitalization Project was to provide assistance to Illinois vocational educators, administrators, regional administrators, and regional delivery system directors in strengthening vocational programs. Ten major accomplishments were achieved: (1) seven regional instructional materials coordinators (IMCs) were…

76 FR 55969 - Self-Regulatory Organizations; C2 Options Exchange, Incorporated; Order Approving Proposed Rule...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-09

....2d 109 (1983). In issuing this order, the Commission expresses no view with respect to the matters... attract liquidity from dark pools, crossing mechanisms, and the over-the-counter markets.\\72\\ \\68\\ See IMC...

75 FR 16676 - Airworthiness Standards; Electrical and Electronic System Lightning Protection

Federal Register 2010, 2011, 2012, 2013, 2014

2010-04-02

... systems that allow them to operate into instrument meteorological conditions (IMC), where lightning... 27 standards that operate in VFR-only operations with electrical or electronic systems installed for... Airworthiness Standards; Electrical and Electronic System Lightning Protection AGENCY: Federal Aviation...

Case study of rotating sonar sensor application in unmanned automated guided vehicle

NASA Astrophysics Data System (ADS)

Chandak, Pravin; Cao, Ming; Hall, Ernest L.

2001-10-01

A single rotating sonar element is used with a restricted angle of sweep to obtain readings to develop a range map for the unobstructed path of an autonomous guided vehicle (AGV). A Polaroid ultrasound transducer element is mounted on a micromotor with an encoder feedback. The motion of this motor is controlled using a Galil DMC 1000 motion control board. The encoder is interfaced with the DMC 1000 board using an intermediate IMC 1100 break-out board. By adjusting the parameters of the Polaroid element, it is possible to obtain range readings at known angles with respect to the center of the robot. The readings are mapped to obtain a range map of the unobstructed path in front of the robot. The idea can be extended to a 360 degree mapping by changing the assembly level programming on the Galil Motion control board. Such a system would be compact and reliable over a range of environments and AGV applications.

[In Process Citation].

PubMed

Álvarez, Cristian; Ramírez-Campillo, Rodrigo; Vallejos-Rojas, Andrea; Jaramillo-Gallardo, Javiera; Salas Bravo, Carlos; Cano-Montoya, Johnattan; Celis-Morales, Carlos

2016-03-25

 Introducción: obesidad e inactividad física son importantes factores de riesgo para el desarrollo de hipertensión en adultos. No obstante, hay poca evidencia sobre el efecto de estos factores de riesgo en el desarrollo de hipertensión en población infantil. Objetivo: investigar la asociación del estado nutricional, niveles de actividad física y etnicidad con niveles de hipertensión en escolares entre 6 y 13 años de edad. Métodos: un total de 418 escolares de ascendencia étnica europea (n = 311) y mapuche (n = 107) fueron participantes de este estudio transversal. Se midió el peso, talla, índice de masa corporal (IMC) y presión arterial, utilizando protocolos estandarizados. Resultados: no se encontraron diferencias significativas en IMC, estado nutricional y presión arterial entre niños con ascendencia europea y mapuche. No obstante, la prevalencia de prehipertensión (21,3% vs. 11,1%) e hipertensión (28,9% vs. 18,6%) fue significativamente mayor en escolares mapuches en comparación con europeos, respectivamente. Escolares con ascendencia mapuche tienen un mayor riesgo de desarrollar prehipertensión o hipertensión que escolares con ascendencia europea (OR: 1,92 [1,19 a 3,06], p < 0,01). La prevalencia de hipertensión aumenta significativamente en ambos grupos étnicos con el incremento de IMC y bajos niveles de actividad física. Conclusiones: el riesgo de desarrollar prehipertensión o hipertensión es mayor en población infantil ascendiente de mapuches que ascendiente de europeos y este riesgo se ve acentuado con el incremento de obesidad y bajos niveles de actividad física.

Undercooling Behavior and Intermetallic Compound Coalescence in Microscale Sn-3.0Ag-0.5Cu Solder Balls and Sn-3.0Ag-0.5Cu/Cu Joints

NASA Astrophysics Data System (ADS)

Zhou, M. B.; Ma, X.; Zhang, X. P.

2012-11-01

The microstructure of microscale solder interconnects and soldering defects have long been known to have a significant influence on the reliability of electronic packaging, and both are directly related to the solidification behavior of the undercooled solder. In this study, the undercooling behavior and solidification microstructural evolution of Sn-3.0Ag-0.5Cu solder balls with different diameters (0.76 mm, 0.50 mm, and 0.30 mm) and the joints formed by soldering these balls on Cu open pads of two diameters (0.48 mm and 0.32 mm) on a printed circuit board (PCB) substrate were characterized by differential scanning calorimetry (DSC) incorporated into the reflow process. Results show that the decrease in diameter of the solder balls leads to an obvious increase in the undercooling of the balls, while the undercooling of the solder joints shows a dependence on both the diameter of the solder balls and the diameter ratio of solder ball to Cu pad (i.e., D s/ D p), and the diameter of the solder balls has a stronger influence on the undercooling of the joints than the dimension of the Cu pad. Coarse primary intermetallic compound (IMC) solidification phases were formed in the smaller solder balls and joints. The bulk Ag3Sn IMC is the primary solidification phase in the as-reflowed solder balls. Due to the interfacial reaction and dissolution of Cu atoms into the solder matrix, the primary Ag3Sn phase can be suppressed and the bulk Cu6Sn5 IMC is the only primary solidification phase in the as-reflowed solder joints.

COBRA ATD multispectral camera response model

NASA Astrophysics Data System (ADS)

Holmes, V. Todd; Kenton, Arthur C.; Hilton, Russell J.; Witherspoon, Ned H.; Holloway, John H., Jr.

2000-08-01

A new multispectral camera response model has been developed in support of the US Marine Corps (USMC) Coastal Battlefield Reconnaissance and Analysis (COBRA) Advanced Technology Demonstration (ATD) Program. This analytical model accurately estimates response form five Xybion intensified IMC 201 multispectral cameras used for COBRA ATD airborne minefield detection. The camera model design is based on a series of camera response curves which were generated through optical laboratory test performed by the Naval Surface Warfare Center, Dahlgren Division, Coastal Systems Station (CSS). Data fitting techniques were applied to these measured response curves to obtain nonlinear expressions which estimates digitized camera output as a function of irradiance, intensifier gain, and exposure. This COBRA Camera Response Model was proven to be very accurate, stable over a wide range of parameters, analytically invertible, and relatively simple. This practical camera model was subsequently incorporated into the COBRA sensor performance evaluation and computational tools for research analysis modeling toolbox in order to enhance COBRA modeling and simulation capabilities. Details of the camera model design and comparisons of modeled response to measured experimental data are presented.

Synthetic Vision CFIT Experiments for GA and Commercial Aircraft: "A Picture Is Worth A Thousand Lives"

NASA Technical Reports Server (NTRS)

Prinzel, Lawrence J., III; Hughes, Monica F.; Arthur, Jarvis J., III; Kramer, Lynda J.; Glaab, Louis J.; Bailey, Randy E.; Parrish, Russell V.; Uenking, Michael D.

2003-01-01

Because restricted visibility has been implicated in the majority of commercial and general aviation accidents, solutions will need to focus on how to enhance safety during instrument meteorological conditions (IMC). The NASA Synthetic Vision Systems (SVS) project is developing technologies to help achieve these goals through the synthetic presentation of how the outside world would look to the pilot if vision were not reduced. The potential safety outcome would be a significant reduction in several accident categories, such as controlled-flight-into-terrain (CFIT), that have restricted visibility as a causal factor. The paper describes two experiments that demonstrated the efficacy of synthetic vision technology to prevent CFIT accidents for both general aviation and commercial aircraft.

An Analysis of the Role of ATC in the AILS Concept

NASA Technical Reports Server (NTRS)

Waller, Marvin C.; Doyle, Thomas M.; McGee, Frank G.

2000-01-01

Airborne information for lateral spacing (AILS) is a concept for making approaches to closely spaced parallel runways in instrument meteorological conditions (IMC). Under the concept, each equipped aircraft will assume responsibility for accurately managing its flight path along the approach course and maintaining separation from aircraft on the parallel approach. This document presents the results of an analysis of the AILS concept from an Air Traffic Control (ATC) perspective. The process has been examined in a step by step manner to determine ATC system support necessary to safely conduct closely spaced parallel approaches using the AILS concept. The analysis resulted in recognizing a number of issues related to integrating the process into the airspace system and proposes operating procedures.

Exceptional Children Information Center--Progress and Potential

ERIC Educational Resources Information Center

Jordan, June B.; And Others

1970-01-01

Defines the scope and function of the ERIC Clearinghouse on Exceptional Children (ERIC/CEC). This clearinghouse also serves as a comprehensive source of information on research instructional materials, programs, administration, teacher education, methods, and special education curricula in the Special Education IMC/RMC Network. (DE)

Integrated Undergraduate Management Education: An Informal Benefit/Cost Analysis

ERIC Educational Resources Information Center

Casey, William L., Jr.

2005-01-01

This paper seeks to contribute to the literature of management education by evaluating assessment data on Babson College's integrated undergraduate management core program (IMC). Transitions from functionally isolated curricula to more integrated alternatives involve both benefits and costs, accruing to faculty, students and sponsoring…

Thesaurus for Special Education Instructional Materials.

ERIC Educational Resources Information Center

Dailey, Rebecca; And Others

The thesaurus is intended as a preliminary standardization and clarification of terms used to index special education instructional materials throughout the Special Education Instructional Materials Centers/Regional Media Centers (IMC/RMC) Network. The majority of entries are approved descriptors appearing in the selected standard, the Thesaurus…

Concurrent validity of Spanish-language versions of the Mini-Mental State Examination, Mental Status Questionnaire, Information-Memory-Concentration test, and Orientation-Memory-Concentration test: Alzheimer's disease patients and nondemented elderly comparison subjects.

PubMed

Taussig, I M; Mack, W J; Henderson, V W

1996-07-01

One-hundred fifty-eight elderly Spanish-speaking U.S. residents (81 patients diagnosed with Alzheimer's disease and 77 subjects without dementia) were tested with Spanish-language versions of four brief cognitive assessment instruments: the Mini-Mental State Examination (S-MMSE), the Mental Status Questionnaire (S-MSQ), the Information-Memory-Concentration test (S-IMC), and the Orientation-Memory-Concentration test (S-OMC). Within-group performances were highly correlated for all four instruments. All tests distinguished between the demented and nondemented groups, but best discrimination was achieved with the S-IMC, which correctly classified 98% of subjects. This version was also the best predictor of functional disability, as measured by impairments in instrumental activities of daily living. Within the normal comparison group, neither gender nor a subject's monolingual/bilingual status affected test performance. These four Spanish-language cognitive screening tasks may aid in the evaluation of dementia among Spanish-speaking patients.

Root Cause Investigation of Lead-Free Solder Joint Interfacial Failures After Multiple Reflows

NASA Astrophysics Data System (ADS)

Li, Yan; Hatch, Olen; Liu, Pilin; Goyal, Deepak

2017-03-01

Solder joint interconnects in three-dimensional (3D) packages with package stacking configurations typically must undergo multiple reflow cycles during the assembly process. In this work, interfacial open joint failures between the bulk solder and the intermetallic compound (IMC) layer were found in Sn-Ag-Cu (SAC) solder joints connecting a small package to a large package after multiple reflow reliability tests. Systematic progressive 3D x-ray computed tomography experiments were performed on both incoming and assembled parts to reveal the initiation and evolution of the open failures in the same solder joints before and after the reliability tests. Characterization studies, including focused ion beam cross-sections, scanning electron microscopy, and energy-dispersive x-ray spectroscopy, were conducted to determine the correlation between IMC phase transformation and failure initiation in the solder joints. A comprehensive failure mechanism, along with solution paths for the solder joint interfacial failures after multiple reflow cycles, is discussed in detail.

The Fight Deck Perspective of the NASA Langley AILS Concept

NASA Technical Reports Server (NTRS)

Rine, Laura L.; Abbott, Terence S.; Lohr, Gary W.; Elliott, Dawn M.; Waller, Marvin C.; Perry, R. Brad

2000-01-01

Many US airports depend on parallel runway operations to meet the growing demand for day to day operations. In the current airspace system, Instrument Meteorological Conditions (IMC) reduce the capacity of close parallel runway operations; that is, runways spaced closer than 4300 ft. These capacity losses can result in landing delays causing inconveniences to the traveling public, interruptions in commerce, and increased operating costs to the airlines. This document presents the flight deck perspective component of the Airborne Information for Lateral Spacing (AILS) approaches to close parallel runways in IMC. It represents the ideas the NASA Langley Research Center (LaRC) AILS Development Team envisions to integrate a number of components and procedures into a workable system for conducting close parallel runway approaches. An initial documentation of the aspects of this concept was sponsored by LaRC and completed in 1996. Since that time a number of the aspects have evolved to a more mature state. This paper is an update of the earlier documentation.

Microstructural characterization of AA5183 aluminum clad AISI 1018 steel prepared by electro spark deposition

NASA Astrophysics Data System (ADS)

Rastkerdar, E.; Aghajani, H.; Kianvash, A.; Sorrell, C. C.

2018-04-01

The application of a simple and effective technique, electro spark deposition (ESD), to create aluminum clad steel plate has been studied. AA5183 aluminum rods were used as the rotating electrode for cladding of the AISI 1018 steel. The microstructure of the interfacial zone including the intermetallic compounds (IMC) layer and the clad metal have been investigated by scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS) and transmission electron microscopy (TEM and STEM). According to the results sound aluminum clad with thickness up to 25–30 μm can be achieved. Very thin (<4 μm) IMC layer was formed at the Al/Fe interface and the structural (electron diffraction pattern) and chemical analysis (STEM) conducted by TEM confirmed that the layer is constituted of Fe rich phases, both implying a much improved mechanical properties. Investigation of the orientations of phases at the interfacial zone confirmed absence of any preferred orientation.

Microstructure and Properties of Lap Joint Between Aluminum Alloy and Galvanized Steel by CMT

NASA Astrophysics Data System (ADS)

Niu, Song; Chen, Su; Dong, Honggang; Zhao, Dongsheng; Zhang, Xiaosheng; Guo, Xin; Wang, Guoqiang

2016-05-01

Lap joining of 1-mm-thick Novelist AC 170 PX aluminum alloy to 1.2-mm-thick ST06 Z galvanized steel sheets for automotive applications was conducted by cold metal transfer advanced welding process with ER4043 and ER4047 filler wires. Under the optimized welding parameters with ER4043 filler wire, the tensile shear strength of joint was 189 MPa, reaching 89% of the aluminum alloy base metal. Microstructure and elemental distribution were characterized by optical metalloscope and electron probe microanalysis. The lap joints with ER4043 filler wire had smaller wetting angle and longer bonded line length with better wettability than with ER4047 filler wire during welding with same parameters. The needle-like Al-Fe-Si intermetallic compounds (IMCs) were spalled into the weld and brought negative effect to the tensile strength of joints. With increasing welding current, the needle-like IMCs grew longer and spread further into the weld, which would deteriorate the tensile shear strength.

Fabrication of an r-Al2Ti intermetallic matrix composite reinforced with α-Al2O3 ceramic by discontinuous mechanical milling for thermite reaction

NASA Astrophysics Data System (ADS)

Mosleh, A.; Ehteshamzadeh, M.; Taherzadeh Mousavian, R.

2014-10-01

In this study, a powder mixture with an Al/TiO2 molar ratio of 10/3 was used to form an r-Al2Ti intermetallic matrix composite (IMC) reinforced with α-Al2O3 ceramic by a novel milling technique, called discontinuous mechanical milling (DMM) instead of milling and ignition of the produced thermite. The results of energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD) of samples with varying milling time indicate that this fabrication process requires considerable mechanical energy. It is shown that Al2Ti-Al2O3 IMC with small grain size was produced by DMM after 15 h of ball milling. Peaks for γ-TiAl as well as Al2Ti and Al2O3 are observed in XRD patterns after DMM followed by heat treatment. The microhardness of the DMM-treated composite produced after heat treatment was higher than Hv 700.

Composition, physicochemical properties and thermal inactivation kinetics of polyphenol oxidase and peroxidase from coconut (Cocos nucifera) water obtained from immature, mature and overly-mature coconut.

PubMed

Tan, Thuan-Chew; Cheng, Lai-Hoong; Bhat, Rajeev; Rusul, Gulam; Easa, Azhar Mat

2014-01-01

Composition, physicochemical properties and enzyme inactivation kinetics of coconut water were compared between immature (IMC), mature (MC) and overly-mature coconuts (OMC). Among the samples studied, pH, turbidity and mineral contents for OMC water was the highest, whereas water volume, titratable acidity, total soluble solids and total phenolics content for OMC water were the lowest. Maturity was found to affect sugar contents. Sucrose content was found to increase with maturity, and the reverse trend was observed for fructose and glucose. Enzyme activity assessment showed that polyphenol oxidase (PPO) in all samples was more heat resistant than peroxidase (POD). Compared to IMC and MC, PPO and POD from OMC water showed the lowest thermal resistance, with D83.3°C=243.9s (z=27.9°C), and D83.3°C=129.9s (z=19.5°C), respectively. Copyright © 2013 Elsevier Ltd. All rights reserved.

Genetic Insights Into Pyralomicin Biosynthesis in Nonomuraea spiralis IMC A-0156

PubMed Central

Flatt, Patricia M.; Wu, Xiumei; Perry, Steven; Mahmud, Taifo

2013-01-01

The biosynthetic gene cluster for the pyralomicin antibiotics has been cloned and sequenced from Nonomuraea spiralis IMC A-0156. The 41-kb gene cluster contains 27 ORFs predicted to encode all of the functions for pyralomicin biosynthesis. This includes non-ribosomal peptide synthetases (NRPS) and polyketide synthases (PKS) required for the formation of the benzopyranopyrrole core unit, as well as a suite of tailoring enzymes (e.g., four halogenases, an O-methyltransferase, and an N-glycosyltransferase) necessary for further modifications of the core structure. The N-glycosyltransferase is predicted to transfer either glucose or a pseudosugar (cyclitol) to the aglycone. A gene cassette encoding C7-cyclitol biosynthetic enzymes was identified upstream of the benzopyranopyrrole-specific ORFs. Targeted disruption of the gene encoding the N-glycosyltransferase, prlH, abolished pyralomicin production and recombinant expression of PrlA confirms the activity of this enzyme as a sugar phosphate cyclase (SPC) involved in the formation of the C7-cyclitol moiety. PMID:23607523

Early Formulation Model-centric Engineering on NASA's Europa Mission Concept Study

NASA Technical Reports Server (NTRS)

Bayer, Todd; Chung, Seung; Cole, Bjorn; Cooke, Brian; Dekens, Frank; Delp, Chris; Gontijo, Ivair; Lewis, Kari; Moshir, Mehrdad; Rasmussen, Robert;

Monoclonal antibody antagonists of hypothalamic FGFR1 cause potent but reversible hypophagia and weight loss in rodents and monkeys.

PubMed

Sun, Haijun D; Malabunga, Maria; Tonra, James R; DiRenzo, Roberto; Carrick, Francine E; Zheng, Huiyuan; Berthoud, Hans-Rudolf; McGuinness, Owen P; Shen, Juqun; Bohlen, Peter; Leibel, Rudolph L; Kussie, Paul

2007-03-01

We generated three fully human monoclonal antibody antagonists against fibroblast growth factor receptor-1 (FGFR1) that potently block FGF signaling. We found that antibodies targeting the c-splice form of the receptor (FGFR1c) were anorexigenic when administered intraperitoneally three times weekly to mice, resulting in rapid, dose-dependent weight loss that plateaued (for doses>4 mg/kg) at 35-40% in 2 wk. Animals appeared healthy during treatment and regained their normal body weights and growth trajectories upon clearance of the antibodies from the bloodstream. Measurements of food consumption and energy expenditure indicated that the rapid weight loss was induced primarily by decreased energy intake and not by increased energy expenditure or cachexia and was accompanied by a greater reduction in fat than lean body mass. Hypophagia was not caused through malaise or illness, as indicated by absence of conditioned taste aversion, pica behavior, and decreased need-induced salt intake in rats. In support of a hypothalamic site of action, we found that, after intraperitoneal injections, anti-FGFR1c (IMC-A1), but not a control antibody, accumulated in the median eminence and adjacent mediobasal hypothalamus and that FGFR1c is enriched in the hypothalamus of mice. Furthermore, a single intracerebroventricular administration of 3 microg of IMC-A1 via the 3rd ventricle to mice caused an approximately 36% reduction in food intake and an approximately 6% weight loss within the ensuing 24 h. Our data suggest that FGF signaling through FGFR1c may play a physiological role in hypothalamic feeding circuit and that blocking it leads to hypophagia and weight loss.

Impact of Probiotic SYNBIO(®) Administered by Vaginal Suppositories in Promoting Vaginal Health of Apparently Healthy Women.

PubMed

Verdenelli, Maria Cristina; Cecchini, Cinzia; Coman, Maria Magdalena; Silvi, Stefania; Orpianesi, Carla; Coata, Giuliana; Cresci, Alberto; Di Renzo, Gian Carlo

2016-10-01

The purpose of this study was to investigate whether vaginal administration of probiotic Lactobacillus results in their colonization and persistence in the vagina and whether it promotes normalization and maintenance of pH and Nugent score. A single-arm, open-label controlled towards the baseline (pre-post) study including 35 apparently healthy women was conducted. Each woman was examined three times during the study. Women were instructed to receive daily for 7 days, the probiotic suppositories SYNBIO(®) gin (Lactobacillus rhamnosus IMC 501(®) and Lactobacillus paracasei IMC 502(®)). Vaginal swabs were collected during visit 1, 2, and 3 to determine the total lactobacilli count, the presence of the two administered bacteria, the measure of the pH, and the estimation of Nugent score. Evaluation of treatment tolerability was based on analysis of the type and occurrence of adverse events. The probiotic vaginal suppository was well tolerated and no side effects were reported. Intermediate Nugent score was registered in 40 % of women at visit 1 and these intermediate scores reverted to normal at day 7 (end of treatment) in 20 % of subjects. Administration of SYNBIO(®) gin contributed to a significant increase in the lactobacilli level at visit 2. Molecular typing revealed the presence of the two strains originating from SYNBIO(®) gin in 100 % of women at visit 2 and 34 % at visit 3. No significant changes were registered for pH between visits. The SYNBIO(®) gin product is safe for daily use in healthy women and it could be useful to restore and maintain a normal vaginal microbiota.

A Phase 2 Randomized Study of Ramucirumab (IMC-1121B) with or without Dacarbazine in Patients with Metastatic Melanoma

PubMed Central

Carvajal, Richard D.; Wong, Michael K.; Thompson, John A.; Gordon, Michael S.; Lewis, Karl D.; Pavlick, Anna C.; Wolchok, Jedd D.; Rojas, Patrick B.; Schwartz, Jonathan D.; Bedikian, Agop Y.

2017-01-01

SUMMARY Background To evaluate the efficacy and safety of ramucirumab (IMC-1121B; LY3009806), a fully human monoclonal antibody targeting the vascular endothelial growth factor receptor-2, alone and in combination with dacarbazine in chemotherapy-naïve patients with metastatic melanoma (MM). Methods Eligible patients received ramucirumab (10 mg/kg) + dacarbazine (1000 mg/m2) (Arm A) or ramucirumab only (10 mg/kg) (Arm B) every 3 weeks. The primary endpoint was progression-free survival (PFS); secondary endpoints included overall survival (OS), overall response, and safety. Findings Of 106 randomized patients, 102 received study treatment (Arm A, N = 52; Arm B, N = 50). Baseline characteristics were similar in both arms. Median PFS was 2·6 months (Arm A) and 1·7 months (Arm B); median 6-month PFS rates were 30·7% and 17·9% and 12-month PFS rates were 23·7% and 15·6%, respectively. In Arm A, 9 (17·3%) patients had partial response (PR) and 19 (36·5%), stable disease (SD); PR and SD in Arm B were 2 (4·0%) and 21 (42·0%), respectively. Median OS was 8·7 months in Arm A and 11·1 months in Arm B. Patients in both arms tolerated the treatment with limited grade 3/4 toxicities. Interpretation Ramucirumab alone or in combination with dacarbazine was associated with an acceptable safety profile in patients with MM. Although the study was not powered for comparison between treatment arms, PFS appeared greater with combination therapy. Sustained disease control was observed on both study arm Funding Funded by ImClone Systems LLC, a wholly-owned subsidiary of Eli Lilly and Company, Bridgewater, NJ PMID:24930625

Psychomotor performance in relation to acute oral administration of Delta9-tetrahydrocannabinol and standardized cannabis extract in healthy human subjects.

PubMed

Roser, Patrik; Gallinat, Jürgen; Weinberg, Gordon; Juckel, Georg; Gorynia, Inge; Stadelmann, Andreas M

2009-08-01

Abnormalities in psychomotor performance are a consistent finding in schizophrenic patients as well as in chronic cannabis users. The high levels of central cannabinoid (CB(1)) receptors in the basal ganglia, the cerebral cortex and the cerebellum indicate their implication in the regulation of motor activity. Based on the close relationship between cannabis use, the endogenous cannabinoid system and motor disturbances found in schizophrenia, we expected that administration of cannabinoids may change pattern of psychomotor activity like in schizophrenic patients. This prospective, double-blind, placebo-controlled cross-over study investigated the acute effects of cannabinoids on psychomotor performance in 24 healthy right-handed volunteers (age 27.9 +/- 2.9 years, 12 male) by comparing Delta(9)-tetrahydrocannabinol (Delta(9)-THC) and standardized cannabis extract containing Delta(9)-THC and cannabidiol. Psychomotor performance was assessed by using a finger tapping test series. Cannabis extract, but not Delta(9)-THC, revealed a significant reduction of right-hand tapping frequencies that was also found in schizophrenia. As to the pure Delta(9)-THC condition, left-hand tapping frequencies were correlated with the plasma concentrations of the Delta(9)-THC metabolite 11-OH-THC. These effects are thought to be related to cannabinoid actions on CB(1) receptors in the basal ganglia, the cerebral cortex and the cerebellum. Our data further demonstrate that acute CB(1) receptor activation under the cannabis extract condition may also affect intermanual coordination (IMC) as an index of interhemispheric transfer. AIR-Scale scores as a measure of subjective perception of intoxication were dose-dependently related to IMC which was shown by an inverted U-curve. This result may be due to functional changes involving GABAergic and glutamatergic neurotransmission within the corpus callosum.

Decentralising Zimbabwe’s water management: The case of Guyu-Chelesa irrigation scheme

NASA Astrophysics Data System (ADS)

Tambudzai, Rashirayi; Everisto, Mapedza; Gideon, Zhou

Smallholder irrigation schemes are largely supply driven such that they exclude the beneficiaries on the management decisions and the choice of the irrigation schemes that would best suit their local needs. It is against this background that the decentralisation framework and the Dublin Principles on Integrated Water Resource Management (IWRM) emphasise the need for a participatory approach to water management. The Zimbabwean government has gone a step further in decentralising the management of irrigation schemes, that is promoting farmer managed irrigation schemes so as to ensure effective management of scarce community based land and water resources. The study set to investigate the way in which the Guyu-Chelesa irrigation scheme is managed with specific emphasis on the role of the Irrigation Management Committee (IMC), the level of accountability and the powers devolved to the IMC. Merrey’s 2008 critique of IWRM also informs this study which views irrigation as going beyond infrastructure by looking at how institutions and decision making processes play out at various levels including at the irrigation scheme level. The study was positioned on the hypothesis that ‘decentralised or autonomous irrigation management enhances the sustainability and effectiveness of irrigation schemes’. To validate or falsify the stated hypothesis, data was gathered using desk research in the form of reviewing articles, documents from within the scheme and field research in the form of questionnaire surveys, key informant interviews and field observation. The Statistical Package for Social Sciences was used to analyse data quantitatively, whilst content analysis was utilised to analyse qualitative data whereby data was analysed thematically. Comparative analysis was carried out as Guyu-Chelesa irrigation scheme was compared with other smallholder irrigation scheme’s experiences within Zimbabwe and the Sub Saharan African region at large. The findings were that whilst the scheme is a model of a decentralised entity whose importance lies at improving food security and employment creation within the community, it falls short in representing a downwardly accountable decentralised irrigation scheme. The scheme is faced with various challenges which include its operation which is below capacity utilisation, absence of specialised technical human personnel to address infrastructural breakdowns, uneven distribution of water pressure, incapacitated Irrigation Management Committee (IMC), absence of a locally legitimate constitution, compromised beneficiary participation and unclear lines of communication between various institutions involved in water management. Understanding decentralization is important since one of the key tenets of IWRM is stakeholder participation which the decentralization framework interrogates.

Assessing Impact of Distributions and Dependencies in Analysis of Alternatives of System of Systems: Phase 3

DTIC Science & Technology

2013-12-19

32 3.3 An Approach for Evaluating System-of-Systems Operational Benefits of a...delay of a flight under IMC ............................................... 41 Figure 15: Sensitivity of delay of each of the four segments to...85 Figure 43: Generic SoS node behaviors

Evaluation of Instructional Materials. Position Paper No. 1.

ERIC Educational Resources Information Center

Ward, Ted

The position paper on the evaluation of instructional materials by the Michigan State University Regional Instructional Materials Center for Handicapped Children and Youth (IMC HCY) examines the professional and ethical dilemmas of evaluation and presents evaluation policies of the center. Evaluated by a roster of field evaluators throughout the…

Standards for School Library/Media Programs, 1972-75.

ERIC Educational Resources Information Center

Wisconsin State Dept. of Public Instruction, Madison. Div. of Library Services.

To aid elementary, middle, junior high, and high schools in planning an Instructional Materials Center, this handbook presents standards for this modern concept of a school library. The term Instructional Materials Center (IMC) is used throughout to designate a centralized collection of materials, with a staff of professional and clerical…

Effective disinfection of rough rice using infrared radiation heating

USDA-ARS?s Scientific Manuscript database

The objective of this study was to investigate the effect of infrared (IR) heating and tempering treatments on disinfection of Aspergillus flavus in freshly harvested rough rice and storage rice. Rice samples with initial moisture contents (IMCs) of 14.1 to 27.0% (wet basis) were infected with A. fl...

Bariatric surgery: is it reasonable before the age of 16?

PubMed

Massabki, Lilian Helena Polak; Sewaybricker, Letícia Esposito; Nakamura, Keila Hayashi; Mendes, Roberto Teixeira; Barros, Antonio DE Azevedo; Antonio, Maria Ângela Reis DE Góes Monteiro; Zambon, Mariana Porto

2016-01-01

to assess the severity of obesity in children and adolescents through the presence of comorbidities and the potential indication of bariatric surgery. we conducted a cross-sectional study with clinical and laboratory data of the first consultation of patients at the childhood obesity clinic at a tertiary hospital from 2005 to 2013. We divided the patients into groups with or without potential indication for surgery, and recorded age, gender, birth weight, age of obesity onset, BMI Z score, presence of acanthosis nigricans, blood pressure, total cholesterol and fractions, triglycerides, blood glucose and fasting insulin, HOMA1-IR, CRP and ESR. The group with potential indication for surgery included: BMI > 40 or between 35-40 with comorbidities (Triglycerides >130mg/dl, glucose levels >100mg/dl, HOMA1-IR >3.16, Total Cholesterol >200mg/dl, LDL >130mg/dl and HDL <45mg/dl), regardless of age, epiphysis consolidation and previous treatment. of the 296 patients included in the study, 282 (95.3%) were younger than 16 years. The most frequent change was the HDL (63.2%), followed by HOMA1-IR (37.5%). Of the group of 66 patients with potential indication for surgery (22.3%), only ten (15.1%) had more than 16 years. Acanthosis nigricans, the average HOMA1-IR, insulin, CRP, ESR, age, BMI Z score and systolic and diastolic blood pressure were significant in the group with potential surgical indication. bariatric surgery might be indicated by BMI and comorbidities in children and adolescents under 16 years. avaliar a gravidade da obesidade em crianças e adolescentes pela presença de comorbidades e pela potencial indicação de cirurgia bariátrica. estudo transversal com dados clínicos e laboratoriais da primeira consulta de pacientes do ambulatório de obesidade infantil em um hospital terciário no período de 2005 a 2013. Os pacientes foram divididos em grupos com ou sem potencial indicação cirúrgica, e associados com idade, sexo, peso de nascimento, idade de início da obesidade, escore z de IMC, presença de acantose nigricans, pressão arterial, colesterol total e frações, triglicérides, glicemia e insulina de jejum, HOMA1-IR, PCR e VHS. O grupo com potencial indicação cirúrgica incluiu: IMC >40 ou IMC entre 35-40 com comorbidades (Triglicérides >130mg/dl, Glicemia >100mg/dl, HOMA1-IR >3,16, Colesterol total >200mg/dl, LDL >130mg/dl e HDL <45mg/dl), independente da idade, consolidação das epífises e tratamento prévio. de 296 pacientes incluídos no estudo, 282 (95,3%) tinham menos de 16 anos. A alteração mais frequente foi a do HDL (63,2%), seguido do HOMA1-IR (37,5%). Do grupo de 66 pacientes com potencial indicação cirúrgica (22,3%), apenas dez (15,1%) tinham mais de 16 anos. Acantose nigricans, as médias de HOMA1-IR, insulina, PCR, VHS, idade, escore z de IMC e pressões sistólica e diastólica foram significantes no grupo com potencial indicação cirúrgica. os resultados sugerem que a cirurgia bariátrica, poderia estar indicada pelo IMC e presença de comorbidades, em crianças e adolescentes com menos de 16 anos.

Chemical stability of amorphous materials: specific and general media effects in the role of water in the degradation of freeze-dried zoniporide.

PubMed

Luthra, Suman A; Shalaev, Evgenyi Y; Medek, Ales; Hong, Jinyang; Pikal, Michael J

2012-09-01

The objective of the present work was to determine whether hydrolysis in a model lyophile was influenced by general media effects with water-changing properties of the medium or via a specific mechanism of water as a reactant. Four formulations of zoniporide and sucrose (1:10) were prepared with variable amounts of sorbitol [0%-25% (w/v) of total solids). These formulations were then equilibrated at 6% and 11% relative humidity using saturated salt solutions. The lyophile cakes were analyzed by differential scanning calorimetery (DSC), (isothermal microcalorimetry (IMC), solid- state nuclear magnetic resonance (ssNMR) spectroscopy, and ultraviolet-visible diffuse reflectance (DFR) spectroscopy. DSC and IMC were used to assess the global molecular mobility. ssNMR relaxation times were measured to access local mobility. The DFR was used to determine the solid-state acidity expressed as the Hammett acidity function. Stability of samples was evaluated at 40°C by monitoring potency and purity by high-performance liquid chromatography (HPLC). Results were interpreted in terms of the various roles of water: media effect, plasticization, polarity, and reactant. The kinetics of hydrolysis was observed to be correlated with either/both specific "chemical" effects, that is, water reactant as well as media effect, specifically global molecular mobility of the matrix. Increase in reaction rate with increase in water content is not linear and is a weaker dependence than in some hydrolytic reactions in organic solvents. A moderate amount of an inert plasticizer, sorbitol, conferred additional stabilization, possibly by restricting the amplitude and frequency of fast motions that are on a small length scale. Copyright © 2012 Wiley Periodicals, Inc.

Instructional Materials Center Project Director's Report 1970-71.

ERIC Educational Resources Information Center

Minneapolis Public Schools, Minn.

The Instructional Materials Center (IMC) was developed in August, 1969, to support the Title I Pyramids Reading Program (PRP) begun a year earlier. The PRP attempted to improve the reading skills of educationally disadvantaged children by (1) using one basal reading series in all Minneapolis Target Area elementary schools, (2) providing an…

Staff Manual for Instructional Material Centers. Fourth Revised Edition.

ERIC Educational Resources Information Center

Petrucci, Martha

For media center volunteers or inexperienced technicians, a workshop training guide provides reference and assistance in everyday problems and situations that arise in an instructional material center (IMC). Two five-hour days of instruction and participation, using the guide, are suggested for workshops. Step-by-step processing of book materials,…

Virtual Incarnations: An Exploration of Internet-Mediated Interaction as Manifestation of the Divine

ERIC Educational Resources Information Center

Lytle, Julie Anne

2010-01-01

As faith communities are moving online and creating virtual churches, one widespread critique is the disembodied nature of online relationships. Citing fears of engagement with others who are misrepresenting themselves, many argue that virtual churches are not "real" and Internet-mediated communications (IMC) should not be incorporated into faith…

40 CFR 52.2625 - Compliance schedules.

Code of Federal Regulations, 2011 CFR

2011-07-01

...), (h) Jan. 26, 1973 ......do Jan. 31, 1974. Basins Engineering Wheatland 14 (b), (e), (f), (g) June 6, 1974 ......do Apr. 5, 1974. Stauffer Chemical Co Green River 14 (b), (e), (f), (g) ......do ......do.... Allied Chemical Green River 14 (b), (e), (f), (g) ......do ......do Aug. 1, 1976. IMC Corp Colony 14 (b...

40 CFR 52.2625 - Compliance schedules.

Code of Federal Regulations, 2012 CFR

2012-07-01

...), (h) Jan. 26, 1973 ......do Jan. 31, 1974. Basins Engineering Wheatland 14 (b), (e), (f), (g) June 6, 1974 ......do Apr. 5, 1974. Stauffer Chemical Co Green River 14 (b), (e), (f), (g) ......do ......do.... Allied Chemical Green River 14 (b), (e), (f), (g) ......do ......do Aug. 1, 1976. IMC Corp Colony 14 (b...

40 CFR 52.2625 - Compliance schedules.

Code of Federal Regulations, 2010 CFR

2010-07-01

...), (h) Jan. 26, 1973 ......do Jan. 31, 1974. Basins Engineering Wheatland 14 (b), (e), (f), (g) June 6, 1974 ......do Apr. 5, 1974. Stauffer Chemical Co Green River 14 (b), (e), (f), (g) ......do ......do.... Allied Chemical Green River 14 (b), (e), (f), (g) ......do ......do Aug. 1, 1976. IMC Corp Colony 14 (b...

A bound on holographic entanglement entropy from inverse mean curvature flow

NASA Astrophysics Data System (ADS)

Fischetti, Sebastian; Wiseman, Toby

2017-06-01

Entanglement entropies are notoriously difficult to compute. Large-N strongly-coupled holographic CFTs are an important exception, where the AdS/CFT dictionary gives the entanglement entropy of a CFT region in terms of the area of an extremal bulk surface anchored to the AdS boundary. Using this prescription, we show—for quite general states of (2  +  1)-dimensional such CFTs—that the renormalized entanglement entropy of any region of the CFT is bounded from above by a weighted local energy density. The key ingredient in this construction is the inverse mean curvature (IMC) flow, which we suitably generalize to flows of surfaces anchored to the AdS boundary. Our bound can then be thought of as a ‘subregion’ Penrose inequality in asymptotically locally AdS spacetimes, similar to the Penrose inequalities obtained from IMC flows in asymptotically flat spacetimes. Combining the result with positivity of relative entropy, we argue that our bound is valid perturbatively in 1/N, and conjecture that a restricted version of it holds in any CFT.

Electromigration Failure Mechanism in Sn-Cu Solder Alloys with OSP Cu Surface Finish

NASA Astrophysics Data System (ADS)

Chu, Ming-Hui; Liang, S. W.; Chen, Chih; Huang, Annie T.

2012-09-01

Organic solderable preservative (OSP) has been adopted as the Cu substrate surface finish in flip-chip solder joints for many years. In this study, the electromigration behavior of lead-free Sn-Cu solder alloys with thin-film under bump metallization and OSP surface finish was investigated. The results showed that severe damage occurred on the substrate side (cathode side), whereas the damage on the chip side (cathode side) was not severe. The damage on the substrate side included void formation, copper dissolution, and formation of intermetallic compounds (IMCs). The OSP Cu interface on the substrate side became the weakest point in the solder joint even when thin-film metallization was used on the chip side. Three-dimensional simulations were employed to investigate the current density distribution in the area between the OSP Cu surface finish and the solder. The results indicated that the current density was higher along the periphery of the bonding area between the solder and the Cu pad, consistent with the area of IMC and void formation in our experimental results.

[Not Available].

PubMed

Fernández Castillo, Rafael; Cañadas de la Fuente, Gustavo R; Cañadas de la Fuente, Guillermo A; De la Fuente Solana, Emilia Inmaculada; Esteban de la Rosa, Rafael José; Bravo Soto, Juan

2016-07-19

Introducción: la obesidad y el sobrepeso presentan efectos adversos sobre la salud, lo que contribuye a la aparición de enfermedades metabólicas y cardiovasculares que ponen en peligro la integridad del injerto.Objetivo: investigar la influencia del IMC pretrasplante renal sobre el funcionamiento del injerto renal al año de trasplante mediante el estudio de cuatro métodos distintos de medir la filtración glomerular.Material y métodos: en este trabajo se ha seguido a 1.336 pacientes de ambos sexos trasplantados renales; se les realizaron mediciones pretrasplante y postrasplante de parámetros bioquímicos, mediciones antropométricas y función renal mediante medidas de filtrado glomerular.Resultados: a mayor índice de masa corporal pretrasplante se produce una disminución del filtrado glomerular medido por cuatro métodos distintos, así como mayor porcentaje de rechazos.Conclusiones: un IMC elevado pretrasplante contribuye a la disfunción del injerto, a una disminución del filtrado glomerular y a complicaciones del injerto en el primer año postrasplante.

Simulation and flight test evaluation of head-up-display guidance for harrier approach transitions

NASA Technical Reports Server (NTRS)

Dorr, D. W.; Moralez, E., III; Merrick, V. K.

1994-01-01

Position and speed guidance displays for STOVL aircraft curved, decelerating approaches to hover and vertical landing have been evaluated for their effectiveness in reducing pilot workload and improving performance. The NASA V/STOL Systems Research Aircraft, a modified YAV-8B Harrier prototype, was used to evaluate the displays in flight, whereas the NASA Ames Vertical Motion Simulator was used to extend the flight test results to instrument meteorological conditions (IMC) and to examine performance in various conditions of wind and turbulence. The simulation data showed close correlation with the flight test data, and both demonstrated the feasibility of the displays. With the exception of the hover task in zero visibility, which was level-3, averaged Copper-Harper handling qualities ratings given during simulation were level-2 for both the approach task and the hover task in all conditions. During flight tests in calm and clear conditions, the displays also gave rise to level-2 handling qualities ratings. Pilot opinion showed that the guidance displays would be useful in visual flight, especially at night, as well as in IMC.

Flight Experiment Investigation of General Aviation Self-Separation and Sequencing Tasks

NASA Technical Reports Server (NTRS)

Murdoch, Jennifer L.; Ramiscal, Ermin R.; McNabb, Jennifer L.; Bussink, Frank J. L.

2005-01-01

A new flight operations concept called Small Aircraft Transportation System (SATS) Higher Volume Operations (HVO) was developed to increase capacity during Instrument Meteorological Conditions (IMC) at non-towered, non-radar airports by enabling concurrent operations of multiple aircraft. One aspect of this concept involves having pilots safely self-separate from other aircraft during approaches into these airports using appropriate SATS HVO procedures. A flight experiment was conducted to determine if instrument-rated general aviation (GA) pilots could self-separate and sequence their ownship aircraft, while following a simulated aircraft, into a non-towered, non-radar airport during simulated IMC. Six GA pilots' workload levels and abilities to perform self-separation and sequencing procedures while flying a global positioning system (GPS) instrument approach procedure were examined. The results showed that the evaluation pilots maintained at least the minimum specified separation between their ownship aircraft and simulated traffic and maintained their assigned landing sequence 100-percent of the time. Neither flight path deviations nor subjective workload assessments were negatively impacted by the additional tasks of self-separating and sequencing during these instrument approaches.

Effect of Brass Interlayer Sheet on Microstructure and Joint Performance of Ultrasonic Spot-Welded Copper-Steel Joints

NASA Astrophysics Data System (ADS)

Satpathy, Mantra Prasad; Kumar, Abhishek; Sahoo, Susanta Kumar

2017-07-01

Solid-state ultrasonic spot welding (USW) inevitably offers a potential solution for joining dissimilar metal combination like copper (Cu) and steel (SS). In this study, the USW has been performed on Cu (UNS C10100) and SS (AISI 304) with brass interlayer by varying various welding parameters, aiming to identify the interfacial reaction, changes in microstructure and weld strength. The highest tensile shear and T-peel failure loads of 1277 and 174 N are achieved at the optimum conditions like 68 µm of vibration amplitude, 0.42 MPa of weld pressure and 1 s of weld time. The fractured surface analysis of brass interlayer and AISI 304 stainless steel samples reveals the features like swirls, voids and intermetallic compounds (IMCs). These IMCs are composed of CuZn and FeZn composite-like structures with 1.0 μm thickness. This confirms that the weld quality is specifically sensitive to the levels of input parameter combinations as well as the type of material present on the sonotrode side.

Effect of Thermal Aging on the Mechanical Properties of Sn3.0Ag0.5Cu/Cu Solder Joints Under High Strain Rate Conditions

NASA Astrophysics Data System (ADS)

Nguyen, Van Luong; Kim, Ho-Kyung

2015-07-01

Shear tests with velocities between 0.5 m/s and 2.5 m/s were conducted to investigate the deformation characteristics of 0.76 mm lead-free Sn-3Ag-0.5Cu solder ball joints after thermal aging at 373 K up to 1000 h. A scanning electron microscope equipped with energy dispersive spectroscopy was then used to examine the fracture surfaces and microstructures of the solder joints. The results showed that the main failure mode of the solder joints was the brittle interfacial fracture mode with cleavage failure in the intermetallic compound (IMC). The maximum shear strength and the fracture toughness ( K C) of the solder joint decreased substantially after aging for the initial aging time, after which they decreased gradually with further aging or an increase in the strain rate. The evolution of the IMC layer when it was thicker and had coarser nodules due to thermal aging was the primary cause of the reduction in the shear strength and fracture toughness in this study.

[In Process Citation].

PubMed

Santos, Carla Adriana; Fonseca, Jorge; Carolino, Elisabete; Lopes, Teresa; Sousa Guerreiro, António

2016-03-25

Introducción y objetivos: el cobre (Cu) es un oligoelemento muy estudiado, pero poco se sabe de su evolución en los pacientes alimentados por gastrostomía endoscópica (GEP). Pretendemos evaluar la evolución del Cu sérico desde la gastrostomía hasta 12 semanas después de la intervención en estos pacientes alimentados con preparaciones domésticas.  Métodos: realizamos un estudio observacional prospectivo para evaluar el Cu sérico, la albúmina, la transferrina y el índice de masa corporal (IMC) en el momento de la GEP, tras 4 semanas y 12 semanas después de la intervención. Los datos incluyen edad, género, NRS 2002 y enfermedad subyacente: cánceres de cabeza y cuello (CCC) y disfagia neurológica (DN). Después de la intervención, estos pacientes fueron alimentados conpreparaciones domésticas. Resultados: 146 enfermos (89 hombres), entre 21-95 años: CCC-56, DN-90. Valores de Cu entre 42-160 μg/dl (normal: 70-140 μg/dl); normales 89% (n = 130); bajos 11% (n = 16), albúmina baja: 53% (n = 77), transferrina baja: 65% (n = 94), IMC bajo: 53% (n = 78). Después de 4 semanas: valores normales de Cu en 93% y bajos en 7%, albúmina baja en 34%, transferrina baja en 52%. Tras 12 semanas: valores normales de Cu en 95% y bajos en 5%, albúmina baja en 25%, transferrina baja en 32%. No encontramos diferencias significativas en el Cusérico cuando se compara edad, género, enfermedad subyacente, IMC, albúmina y transferrina. Conclusiones: la mayoría de los enfermos presentan Cu sérico normal en el momento de la gastrostomía. Para los enfermos con Cu sérico bajo antes del procedimiento, la alimentación con preparaciones domésticas parece suficiente para su normalización progresiva.

PubMed

Rodríguez-Villalba, Luisa Fernanda; Ramírez-Vélez, Robinson; Correa-Bautista, Jorge Enrique

2016-09-20

Objetivo: el propósito del estudio fue relacionar la etapa en el cambio en el comportamiento frente a la actividad física y el estado nutricional en escolares de Bogotá, Colombia, pertenecientes al estudio FUPRECOL.Método: se trata de un estudio transversal, realizado en 8.000 niños y adolescentes de entre 9 y 17 años, pertenecientes a 24 instituciones educativas. Se aplicó de manera autodiligenciada el cuestionario de cambio de comportamiento en función de la intención de realizar actividad física (CCC-FUPRECOL) y se midió el peso y la estatura para determinar el estado nutricional con el índice de masa corporal (IMC).Resultados: el porcentaje de respuesta fue del 82,5% y se consideraron válidos 6.606 registros, siendo el 58,3% (n = 3.850) niñas, con un promedio de edad de 12,7 ± 2,3 años. En la población general, el 5,3% de los escolares se encontraba en etapa de precontemplación, el 31,8% en contemplación, el 26,7% en acción y el 36,2% en etapa de mantenimiento. Al comparar la etapa de cambio con el estado nutricional por IMC, los escolares clasificados como obesos mostraron mayor frecuencia de respuesta en la etapa de precontemplación, mientras que los escolares con peso saludable acusaron mayores porcentajes en la etapa de mantenimiento.Conclusión: en escolares de Bogotá, Colombia, se encontró una relación estadísticamente significativa entre la intención de realizar actividad con el estado nutricional medido con el IMC. Fomentar la promoción de la actividad física y monitorizar el estado nutricional deberá ser una prioridad en las agendas y políticas públicas dentro del ámbito escolar.

[In Process Citation].

PubMed

Caravalí-Meza, Nuris Yohana; Jiménez-Cruz, Arturo; Bacardí-Gascón, Montserrat

2016-03-25

Antecedentes: se ha reportado una asociación entre el aumento del consumo de bebidas azucaradas y varias enfermedades metabólicas. Objetivo: evaluar el efecto del consumo de bebidas azucaradas sobre la obesidad en un periodo de 12 meses en mexicanos de 15 a 19 años. Métodos: el diseño del estudio fue prospectivo, con 12 meses de seguimiento. Se midieron el peso, la talla y la circunferencia de cintura (CC), y se calculó el puntaje z de índice de masa corporal (IMC). Se aplicó un cuestionario sobre consumo de 19 bebidas. Para evaluar la predicción del aumento de IMC y de CC como resultado del consumo de bebidas, se utilizó análisis de regresión logística binomial. Resultados: al final del estudio se evaluó al 89% (1.344). El promedio de edad fue de 15 años, 55% fueron mujeres. La prevalencia de sobre- peso y obesidad al final del estudio fue del 33%. Al final del estudio, un 25% de los participantes consumían más de 50 g de azúcar proveniente de las bebidas. Quienes consumieron 50 g de azúcar o más al día presentaron mayor riesgo de aumentar la CC ≥ 2 cm (RR = 1,19, IC 95%, 1,03-1,39, p = 0,02). Quienes mantuvieron el consumo de bebidas azucaradas durante 12 meses, al compararlo con los que disminuyeron el consumo a 10 g/día, presentaron 71% más probabilidades de aumentar a un puntaje de IMC ≥ 2 (RR = 1,71, IC 95%, 1,03-2,86, p = 0,039). Conclusión: el alto consumo de bebidas azucaradas aumentó las probabilidades de aumentar de peso y de circunferencia de cintura.

[Not Available].

PubMed

Fehrman-Rosas, Pamela; Delgado-Sánchez, Claudia; Fuentes-Fuentes, Jessica; Hidalgo-Fernández, Andrea; Quintana-Muñoz, Carol; Yunge-Hidalgo, Wilma; Fernández-Godoy, Eloina; Durán-Agüero, Samuel

2016-06-30

Objetivo: asociar patrones alimentarios con la autopercepción del estado nutricional en estudiantes universitarios chilenos de Nutrición y Dietética.Material y métodos: estudio transversal en el que se evaluó a 634 estudiantes de Nutrición y Dietética, de los cuales un 86,4% eran mujeres. A cada alumno se le mostraron siete modelos anatómicos correspondientes a valores de índice de masa corporal (IMC) de 18, 22, 25, 27, 30, 35 y 40 kg/m2. Cada estudiante debía elegir el modelo con el que mejor se identificaba. Posteriormente, se realizó la evaluación antropométrica, se calculó el IMC real comparándolo posteriormente con el IMC percibido, y finalmente se le aplicó una encuesta alimentaria.Resultados: se observa que los sujetos que sobreestiman su peso presentan un menor porcentaje de cumplimiento en el consumo de frutas y verduras al día; en cambio, el mayor porcentaje de sujetos que sigue las recomendaciones se encuentra en el grupo que se ve igual. Hay unaasociación entre una buena percepción de la imagen corporal y el consumo de 3 o más porciones de frutas al día OR = 0,554 (IC 95%; 0,360-0,852), 2 o más porciones de verduras al día OR = 0,438 (IC 95%; 0,283-0,678) y un consumo de alcohol menor de una vez a la semanaOR = 0,451 (IC 95%; 0,270-0,752).Conclusión: los estudiantes que registran una ingesta adecuada de verduras y frutas autodefinen su alimentación como saludable e ideal y tienden a autopercibirse coherentemente en relación con su estado nutricional; además, estos sujetos son los que presentan una ingesta menor de alimentos poco saludables.

Profil comparatif et évolutif des personnes infectées par le virus de l'immunodéficience humaine traitées aux antirétroviraux à Kinshasa, République Démocratique du Congo

PubMed Central

Koy, Tshingani; Mukumbi, Henri; Malandala, Ghislain Lubangi Muteba; Donnen, Philippe; Wilmet–Dramaix, Michèle

2014-01-01

Introduction A trithérapie (ARV) introduite en R.D.Congo en 1996, a permis l′amélioration substantielle de la qualité de vie des PVVIH et a réduit la morbimortalité liée au sida en R.D. Congo. L'objectif de cette étude est de présenter le profil épidémiologique comparatif, clinique, ainsi que l’évolution anthropométrique des PVVIH sous ARV à Kinshasa. Méthodes Etude de cohorte sur 438 PVVIH, de 18 ans et plus, suivies entre mai 2010 à 2011 à Amo Congo à Kinshasa. Une comparaison a été faite entre les patients suivis pendant un an et ceux perdus de vue. Le Chi carré de Mc Nemar et l'analyse de variance pour mesures répétées ont été appliqués pour étudier l’évolution. Résultats Près 12 mois de suivi, 11,4% de patients ont été perdus de vue. Parmi eux, on observait des proportions significativement plus élevées de personnes de niveau socioéconomique bas, d'indice de masse corporelle (IMC) bas, présentant de l'anorexie, des affections opportunistes. Les proportions de patients aux stades OMS 3 & 4 et naïfs étaient également significativement plus élevées et la durée sous ARV plus courte. Les gains moyens des paramètres anthropométriques au 12ème mois, étaient importants: de 3,6 [3,2 - 4,0] kg pour le poids, 1,8 (1,4 - 2,3) cm pour le périmètre abdominal, 0,9 (0,8 - 1,2) cm pour le périmètre brachial, 1,4 (1,2 - 1,5) kg/m2 pour l'IMC. La proportion de patients avec un IMC <18,5 kg/m2 a significativement plus baissé entre l'admission et le 12ème mois parmi les patients sans stomatite que parmi ceux avec stomatite. L'IMC moyen évoluait significativement différemment entre l'admission et le 12ème mois selon l’âge et la taille de ménage. Conclusion Les facteurs fragilisant la rétention des patients sous antirétroviraux et une évolution progressive de l’état nutritionnel ont été observés. PMID:25995784

School-Based Management in Hong Kong: Centralizing or Decentralizing

ERIC Educational Resources Information Center

Pang, I-Wah

2008-01-01

This paper examined the debate on a reform of school-based management in Hong Kong, which was to set up the Incorporated Management Committee (IMC) to manage the subsidized school. The nature of the debate during legislation and the characteristics of the reform were examined. The advantages, disadvantages and the implications of the reform were…

The Underreported Use of Integrated Marketing Communication by Smaller Businesses.

ERIC Educational Resources Information Center

Johnson, Ed

This research suggests integrated marketing communication (IMC) is widely used by small business. In a survey of Midwest businesses, it was found that smaller business tend to integrate their marketing communication to the same extent as do larger businesses. Their advertising, P.R., and sales promotion are as likely to present a unified message,…

Indexing for the Growing Instructional Media Center.

ERIC Educational Resources Information Center

Abbott, George L.

Since indexing systems concentrate upon the information content of materials and not upon their form, instructional media centers (IMC) can use one system for all media. Content descriptors can be selected from a thesaurus of accepted terms, from the title of the material, or from an analysis of the content. The first of these three methods is the…

Social Change and Educational Innovation in a Latin American University. Final Report.

ERIC Educational Resources Information Center

Joyner, Orville D.

The purposes of this study were: (1) to determine the implications of present perceptions of selected faculty and administrative personnel at the University of San Carlos (USC) in Guatemala with regard to the potential of the new Instructional Materials Center (IMC) for their individual responsibilities; and (2) to describe subsequent changes in…

Presence of Observable Conditions of Positive Self-Concept in Elementary School Media Centers: A Descriptive Study.

ERIC Educational Resources Information Center

Williams, Dianne McAfee

In order to focus on important contributions of elementary school instructional media centers (IMC's) to the educational program, a study was conducted to determine the presence of conditions of positive self-concept--cooperation, independence, success, positive atmosphere, challenge, feeling of value or acceptance--in such centers. A descriptive,…

Learning Bodies: What Do Teachers Learn from Embodied Practice?

ERIC Educational Resources Information Center

Yoo, Joanne; Loch, Sarah

2016-01-01

In this article, we reflect on ways that young adolescents learn through embodied practice, which we define as moments when the body is "caught up" in learning activities. Our observations draw from two workshops conducted as part of the "IMC Sky High!" program which annually involves over 150 Year 7 and 8 students from schools…

Single-Pilot Workload Management in Entry-Level Jets

DTIC Science & Technology

2013-09-01

under Instrument Flight Rules ( IFR ) in a Cessna Citation Mustang ELJ level 5 flight training device at CAMI. Eight of the pilots were Mustang owner...Instrument Landing System IFR ............Instrument Flight Rules IMC ...........Instrument Meteorological Conditions ISA...pilots flew an experimental flight with two legs involving high workload management under Instrument Flight Rules ( IFR ) in a Cessna Citation Mustang

Simultaneous rough rice drying and rice bran stabilization using infrared radiation heating

USDA-ARS?s Scientific Manuscript database

The objective of this study was to develop a new rice drying method by using IR heating followed by tempering. Freshly harvested medium grain rice (M206) samples with different initial moisture contents (IMCs) were used in this study. The samples were dried for one- and two-passes by using a catalyt...

A Study to Determine the Presence of Observable Conditions of Positive Self-Concept in Elementary School Media Centers.

ERIC Educational Resources Information Center

McAfee, Dianne Talmadge

Elementary school instructional media centers (IMC's) were studied to determine the presence or absence of six conditions identified as promoting positive self-concept: cooperation, independence, success, positive atmosphere, challenge, and a feeling of value or acceptance. Following a review by a panel of experts of a preliminary observation…

Current Trends in Communication Graduate Degrees: Survey of Communications, Advertising, PR, and IMC Graduate Programs

ERIC Educational Resources Information Center

Quesenberry, Keith A.; Coolsen, Michael K.; Wilkerson, Kristen

2015-01-01

A survey of 61 master's degree advertising programs reveals significant trends in program titles, curriculum design, course delivery, and students served. The results provide insight for current and planned master's degree programs as research predicts a continued increase in demand for master's education over the next decade. Survey results are…

Development of the statistical ARIMA model: an application for predicting the upcoming of MJO index

NASA Astrophysics Data System (ADS)

Hermawan, Eddy; Nurani Ruchjana, Budi; Setiawan Abdullah, Atje; Gede Nyoman Mindra Jaya, I.; Berliana Sipayung, Sinta; Rustiana, Shailla

2017-10-01

This study is mainly concerned in development one of the most important equatorial atmospheric phenomena that we call as the Madden Julian Oscillation (MJO) which having strong impacts to the extreme rainfall anomalies over the Indonesian Maritime Continent (IMC). In this study, we focused to the big floods over Jakarta and surrounded area that suspecting caused by the impacts of MJO. We concentrated to develop the MJO index using the statistical model that we call as Box-Jenkis (ARIMA) ini 1996, 2002, and 2007, respectively. They are the RMM (Real Multivariate MJO) index as represented by RMM1 and RMM2, respectively. There are some steps to develop that model, starting from identification of data, estimated, determined model, before finally we applied that model for investigation some big floods that occurred at Jakarta in 1996, 2002, and 2007 respectively. We found the best of estimated model for the RMM1 and RMM2 prediction is ARIMA (2,1,2). Detailed steps how that model can be extracted and applying to predict the rainfall anomalies over Jakarta for 3 to 6 months later is discussed at this paper.

Probiotic modulation of the microbiota-gut-brain axis and behaviour in zebrafish.

PubMed

Borrelli, Luca; Aceto, Serena; Agnisola, Claudio; De Paolo, Sofia; Dipineto, Ludovico; Stilling, Roman M; Dinan, Timothy G; Cryan, John F; Menna, Lucia F; Fioretti, Alessandro

2016-07-15

The gut microbiota plays a crucial role in the bi-directional gut-brain axis, a communication that integrates the gut and central nervous system (CNS) activities. Animal studies reveal that gut bacteria influence behaviour, Brain-Derived Neurotrophic Factor (BDNF) levels and serotonin metabolism. In the present study, we report for the first time an analysis of the microbiota-gut-brain axis in zebrafish (Danio rerio). After 28 days of dietary administration with the probiotic Lactobacillus rhamnosus IMC 501, we found differences in shoaling behaviour, brain expression levels of bdnf and of genes involved in serotonin signalling/metabolism between control and treated zebrafish group. In addition, in microbiota we found a significant increase of Firmicutes and a trending reduction of Proteobacteria. This study demonstrates that selected microbes can be used to modulate endogenous neuroactive molecules in zebrafish.

Derivation and Characterization of Pathogenic Transmitted/Founder Molecular Clones from Simian Immunodeficiency Virus SIVsmE660 and SIVmac251 following Mucosal Infection

PubMed Central

Lopker, Michael J.; Del Prete, Gregory Q.; Estes, Jacob D.; Li, Hui; Reid, Carolyn; Newman, Laura; Lipkey, Leslie; Camus, Celine; Easlick, Juliet L.; Wang, Shuyi; Decker, Julie M.; Bar, Katharine J.; Learn, Gerald; Pal, Ranajit; Weiss, Deborah E.; Hahn, Beatrice H.; Lifson, Jeffrey D.; Shaw, George M.

2016-01-01

ABSTRACT Currently available simian immunodeficiency virus (SIV) infectious molecular clones (IMCs) and isolates used in nonhuman primate (NHP) models of AIDS were originally derived from infected macaques during chronic infection or end stage disease and may not authentically recapitulate features of transmitted/founder (T/F) genomes that are of particular interest in transmission, pathogenesis, prevention, and treatment studies. We therefore generated and characterized T/F IMCs from genetically and biologically heterogeneous challenge stocks of SIVmac251 and SIVsmE660. Single-genome amplification (SGA) was used to identify full-length T/F genomes present in plasma during acute infection resulting from atraumatic rectal inoculation of Indian rhesus macaques with low doses of SIVmac251 or SIVsmE660. All 8 T/F clones yielded viruses that were infectious and replication competent in vitro, with replication kinetics similar to those of the widely used chronic-infection-derived IMCs SIVmac239 and SIVsmE543. Phenotypically, the new T/F virus strains exhibited a range of neutralization sensitivity profiles. Four T/F virus strains were inoculated into rhesus macaques, and each exhibited typical SIV replication kinetics. The SIVsm T/F viruses were sensitive to TRIM5α restriction. All T/F viruses were pathogenic in rhesus macaques, resulting in progressive CD4+ T cell loss in gastrointestinal tissues, peripheral blood, and lymphatic tissues. The animals developed pathological immune activation; lymphoid tissue damage, including fibrosis; and clinically significant immunodeficiency leading to AIDS-defining clinical endpoints. These T/F clones represent a new molecular platform for the analysis of virus transmission and immunopathogenesis and for the generation of novel “bar-coded” challenge viruses and next-generation simian-human immunodeficiency viruses that may advance the HIV/AIDS vaccine agenda. IMPORTANCE Nonhuman primate research has relied on only a few infectious molecular clones for a myriad of diverse research projects, including pathogenesis, preclinical vaccine evaluations, transmission, and host-versus-pathogen interactions. With new data suggesting a selected phenotype of the virus that causes infection (i.e., the transmitted/founder virus), we sought to generate and characterize infectious molecular clones from two widely used simian immunodeficiency virus lineages (SIVmac251 and SIVsmE660). Although the exact requirements necessary to be a T/F virus are not yet fully understood, we generated cloned viruses with all the necessary characteristic of a successful T/F virus. The cloned viruses revealed typical acute and set point viral-load dynamics with pathological immune activation, lymphoid tissue damage progressing to significant immunodeficiency, and AIDS-defining clinical endpoints in some animals. These T/F clones represent a new molecular platform for studies requiring authentic T/F viruses. PMID:27412591

Novel probabilistic and distributed algorithms for guidance, control, and nonlinear estimation of large-scale multi-agent systems

NASA Astrophysics Data System (ADS)

Bandyopadhyay, Saptarshi

Multi-agent systems are widely used for constructing a desired formation shape, exploring an area, surveillance, coverage, and other cooperative tasks. This dissertation introduces novel algorithms in the three main areas of shape formation, distributed estimation, and attitude control of large-scale multi-agent systems. In the first part of this dissertation, we address the problem of shape formation for thousands to millions of agents. Here, we present two novel algorithms for guiding a large-scale swarm of robotic systems into a desired formation shape in a distributed and scalable manner. These probabilistic swarm guidance algorithms adopt an Eulerian framework, where the physical space is partitioned into bins and the swarm's density distribution over each bin is controlled using tunable Markov chains. In the first algorithm - Probabilistic Swarm Guidance using Inhomogeneous Markov Chains (PSG-IMC) - each agent determines its bin transition probabilities using a time-inhomogeneous Markov chain that is constructed in real-time using feedback from the current swarm distribution. This PSG-IMC algorithm minimizes the expected cost of the transitions required to achieve and maintain the desired formation shape, even when agents are added to or removed from the swarm. The algorithm scales well with a large number of agents and complex formation shapes, and can also be adapted for area exploration applications. In the second algorithm - Probabilistic Swarm Guidance using Optimal Transport (PSG-OT) - each agent determines its bin transition probabilities by solving an optimal transport problem, which is recast as a linear program. In the presence of perfect feedback of the current swarm distribution, this algorithm minimizes the given cost function, guarantees faster convergence, reduces the number of transitions for achieving the desired formation, and is robust to disturbances or damages to the formation. We demonstrate the effectiveness of these two proposed swarm guidance algorithms using results from numerical simulations and closed-loop hardware experiments on multiple quadrotors. In the second part of this dissertation, we present two novel discrete-time algorithms for distributed estimation, which track a single target using a network of heterogeneous sensing agents. The Distributed Bayesian Filtering (DBF) algorithm, the sensing agents combine their normalized likelihood functions using the logarithmic opinion pool and the discrete-time dynamic average consensus algorithm. Each agent's estimated likelihood function converges to an error ball centered on the joint likelihood function of the centralized multi-sensor Bayesian filtering algorithm. Using a new proof technique, the convergence, stability, and robustness properties of the DBF algorithm are rigorously characterized. The explicit bounds on the time step of the robust DBF algorithm are shown to depend on the time-scale of the target dynamics. Furthermore, the DBF algorithm for linear-Gaussian models can be cast into a modified form of the Kalman information filter. In the Bayesian Consensus Filtering (BCF) algorithm, the agents combine their estimated posterior pdfs multiple times within each time step using the logarithmic opinion pool scheme. Thus, each agent's consensual pdf minimizes the sum of Kullback-Leibler divergences with the local posterior pdfs. The performance and robust properties of these algorithms are validated using numerical simulations. In the third part of this dissertation, we present an attitude control strategy and a new nonlinear tracking controller for a spacecraft carrying a large object, such as an asteroid or a boulder. If the captured object is larger or comparable in size to the spacecraft and has significant modeling uncertainties, conventional nonlinear control laws that use exact feed-forward cancellation are not suitable because they exhibit a large resultant disturbance torque. The proposed nonlinear tracking control law guarantees global exponential convergence of tracking errors with finite-gain Lp stability in the presence of modeling uncertainties and disturbances, and reduces the resultant disturbance torque. Further, this control law permits the use of any attitude representation and its integral control formulation eliminates any constant disturbance. Under small uncertainties, the best strategy for stabilizing the combined system is to track a fuel-optimal reference trajectory using this nonlinear control law, because it consumes the least amount of fuel. In the presence of large uncertainties, the most effective strategy is to track the derivative plus proportional-derivative based reference trajectory, because it reduces the resultant disturbance torque. The effectiveness of the proposed attitude control law is demonstrated by using results of numerical simulation based on an Asteroid Redirect Mission concept. The new algorithms proposed in this dissertation will facilitate the development of versatile autonomous multi-agent systems that are capable of performing a variety of complex tasks in a robust and scalable manner.

Pilot Non-Conformance to Alerting System Commands During Closely Spaced Parallel Approaches

NASA Technical Reports Server (NTRS)

Pritchett, Amy R.; Hansman, R. John

1997-01-01

Pilot non-conformance to alerting system commands has been noted in general and to a TCAS-like collision avoidance system in a previous experiment. This paper details two experiments studying collision avoidance during closely-spaced parallel approaches in instrument meteorological conditions (IMC), and specifically examining possible causal factors of, and design solutions to, pilot non-conformance.

Worldwide Report, Nuclear Development and Proliferation

DTIC Science & Technology

1984-05-14

PROLIFERATION IMC QUALITY: 19980729 081 FBIS FOREIGN BROADCAST INFORMATION SERVICE REPRODUCED BY NATIONAL TECHNICAL INFORMATION SERVICE U.S...Information Service , Springfield, Virginia 22161. In order- ing, it is recommended that the JPRS number, title, date and author, if applicable, of...Information Service , and are listed in the Monthly Catalog of U.S. Government Publications issued by the Superintendent of Documents, U.S. Government

Teachers' Perceptions of Incorporated Management Committees as a Form of School-Based Management in Hong Kong

ERIC Educational Resources Information Center

Cheung, Shereen M. C.; Kan, Flora L. F.

2009-01-01

The policy of the registration of School Management Committees (SMCs) as Incorporated Management Committees (IMCs) has led to a dispute between the School Sponsoring Bodies (SSBs) and the Education and Manpower Bureau (EMB, renamed Education Bureau, EDB in July 2007) and has caused great tension between the two parties. However, in this heated…

Survey of Special Education Teacher Population of Indiana, Michigan and Ohio with Special Reference to Consultant Effectiveness. Monograph Series No. 5.

ERIC Educational Resources Information Center

Bulgarella, Rosaria A.; Williams, Lois Q.

Reported in the survey (1968) were effects of the regional Instructional Materials Center (IMC) consultant among special education (SE) teacher populations in Indiana, Ohio, and Michigan. Some of the teacher background information compiled from 222 completed questionnaires indicated that over half taught slow learners, had taught handicapped…

Chemistry, Characterization and Processing of IMC Curing Polymers.

DTIC Science & Technology

1983-07-01

example, nitronium hexafluorosilicate (Ref- erence 110), nitronium hexafluorophosphate (Reference 111) and nitronium trifluorometh- anesulfonate(triflate...CCLtoo) "C The dilithio compound underwent lithium -halogen exchange instead of displacement with bromophenylacetylene (Reference 129) due to the...positive character of the bromine on l-bromo-2-phenylacetylene. The reaction product of the lithium -bromine exchange reaction ൭ was identified as 1,4

The Shear Strength and Fracture Behavior of Sn-Ag- xSb Solder Joints with Au/Ni-P/Cu UBM

NASA Astrophysics Data System (ADS)

Lee, Hwa-Teng; Hu, Shuen-Yuan; Hong, Ting-Fu; Chen, Yin-Fa

2008-06-01

This study investigates the effects of Sb addition on the shear strength and fracture behavior of Sn-Ag-based solders with Au/Ni-P/Cu underbump metallization (UBM) substrates. Sn-3Ag- xSb ternary alloy solder joints were prepared by adding 0 wt.% to 10 wt.% Sb to a Sn-3.5Ag alloy and joining them with Au/Ni-P/Cu UBM substrates. The solder joints were isothermally stored at 150°C for up to 625 h to study their microstructure and interfacial reaction with the UBM. Single-lap shear tests were conducted to evaluate the mechanical properties, thermal resistance, and failure behavior. The results show that UBM effectively suppressed intermetallic compound (IMC) formation and growth during isothermal storage. The Sb addition helped to refine the Ag3Sn compounds, further improving the shear strength and thermal resistance of the solders. The fracture behavior evolved from solder mode toward the mixed mode and finally to the IMC mode with increasing added Sb and isothermal storage time. However, SnSb compounds were found in the solder with 10 wt.% Sb; they may cause mechanical degradation of the solder after long-term isothermal storage.

Evaluation on the characteristics of tin-silver-bismuth solder

NASA Astrophysics Data System (ADS)

Xia, Z.; Shi, Y.; Chen, Z.

2002-02-01

Tin-silver-bismuth solder is characterized by its lower melting point, good wetting behavior, and good mechanical property for which it is expected to be a new lead-free solder to replace tin-lead solder. In this article, Sn-3.33Ag-4.83Bi solder was investigated concerning its physical, spreading, and mechanical properties under specific conditions. Cooling curves and DSC results showed that it was close to eutectic composition (m.p. 210° 212 °C). Coefficiency of thermal expansion (CTE) of this solder, between that of PCBs and copper substrates, was beneficial to alleviate the thermal mismatch of the substrates. It was also a good electrical and thermal conductor. Using a rosin-based, mildly activated (RMA) flux, a spreading test indicated that SnAgBi solder paste had good solderability. Meanwhile, the solder had high tensile strength and fracture energy. Its fracture mechanism was a mixture of ductile and brittle fracture morphology. The metallographic and EDAX analyses indicated that it was composed of a tin-based solid solution and some intermetallic compound (IMC) that could strengthen the substrate. However, these large needle-like IMCs would cut the substrate and this resulted in the decreasing of the toughness of the solder.

Measurement of Sn and In Solidification Undercooling and Lattice Expansion Using In Situ X-Ray Diffraction

DOE PAGES

Elmer, John W.; Specht, Eliot D.

2010-12-15

The solidification behavior of two low-melting-point metals, Sn and In, on three substrates has been examined using in situ x-ray diffraction. Undercoolings of up to 56.1°C were observed for Sn solidified on graphite, which is a non-wetting substrate, while lower undercoolings were observed for Sn on Au/Ni/Cu (17.3°C) and on Cu (10.5°C). Indium behaved quite differently, showing undercoolings of less than 4°C on all three substrates. The lattice expansion/contraction behavior of Sn, In, and intermetallic compounds (IMCs) that formed during the reaction of Sn with Au/Ni/Cu surfaces were also measured during heating and cooling. Results showed anisotropic and nonlinear expansionmore » of both Sn and In, with a contraction, rather than expansion, of the basal planes of In during heating. The principal IMC that formed between Sn and the Au/Ni/Cu surface was characterized as Cu 6Sn 5, having an average expansion coefficient of 13.6 × 10 ₋6/°C, which is less than that of Sn or Cu.« less

Development of a flow system for studying biofilm formation on medical devices with microcalorimetry.

PubMed

Said, Jawal; Walker, Michael; Parsons, David; Stapleton, Paul; Beezer, Anthony E; Gaisford, Simon

2015-04-01

Isothermal microcalorimetry (IMC) is particularly suited to the study of microbiological samples in complex or heterogeneous environments because it does not require optical clarity of the sample and can detect metabolic activity from as few as 10(4) CFU/mL cells. While the use of IMC for studying planktonic cultures is well established, in the clinical environment bacteria are most likely to be present as biofilms. Biofilm prevention and eradication present a number of challenges to designers and users of medical devices and implants, since bacteria in biofilm colonies are usually more resistant to antimicrobial agents. Analytical tools that facilitate investigation of biofilm formation are therefore extremely useful. While it is possible to study pre-prepared biofilms in closed ampoules, better correlation with in vivo behaviour can be achieved using a system in which the bacterial suspension is flowing. Here, we discuss the potential of flow microcalorimetry for studying biofilms and report the development of a simple flow system that can be housed in a microcalorimeter. The use of the flow system is demonstrated with biofilms of Staphylococcus aureus. Copyright © 2014 Elsevier Inc. All rights reserved.

Al and Si Alloying Effect on Solder Joint Reliability in Sn-0.5Cu for Automotive Electronics

NASA Astrophysics Data System (ADS)

Hong, Won Sik; Oh, Chulmin; Kim, Mi-Song; Lee, Young Woo; Kim, Hui Joong; Hong, Sung Jae; Moon, Jeong Tak

2016-12-01

To suppress the bonding strength degradation of solder joints in automotive electronics, we proposed a mid-temperature quaternary Pb-free Sn-0.5Cu solder alloy with minor Pd, Al, Si and Ge alloying elements. We manufactured powders and solder pastes of Sn-0.5Cu-(0.01,0.03)Al-0.005Si-(0.006-0.007)Ge alloys ( T m = 230°C), and vehicle electronic control units used for a flame-retardant-4 printed circuit board with an organic solderability preservative finish were assembled by a reflow soldering process. To investigate the degradation properties of solder joints used in engine compartments, thermal cycling tests were conducted from -40°C to 125°C (10 min dwell) for 1500 cycles. We also measured the shear strength of the solder joints in various components and observed the microstructural evolution of the solder joints. Based on these results, intermetallic compound (IMC) growth at the solder joints was suppressed by minor Pd, Al and Si additions to the Sn-0.5Cu alloy. After 1500 thermal cycles, IMC layers thicknesses for 100 parts per million (ppm) and 300 ppm Al alloy additions were 6.7 μm and 10 μm, compared to the as-reflowed bonding thicknesses of 6 μm and 7 μm, respectively. Furthermore, shear strength degradation rates for 100 ppm and 300 ppm Al(Si) alloy additions were at least 19.5%-26.2%. The cause of the improvement in thermal cycling reliability was analyzed using the (Al,Cu)-Sn, Si-Sn and Al-Sn phases dispersed around the Cu6Sn5 intermetallic at the solder matrix and bonding interfaces. From these results, we propose the possibility of a mid-temperature Sn-0.5Cu(Pd)-Al(Si)-Ge Pb-free solder for automotive engine compartment electronics.

[Effectivity of screening, concepts and attitudes towards metabolic síndrome: a study in bipolar patients followed in Hospital Santa Maria psychiatric consultation].

PubMed

Guerreiro, Diogo Frasquilho; Navarro, Rita; Telles-Correia, Diogo; Martins, Paulo; Trigo, Elsa; Silva, Manuela; Neves, António; Góis, Carlos; Figueira, Maria Luísa

2010-01-01

The Metabolic Syndrome (MS) is constituted by a set of specific metabolic alterations being postulated that the main dysfunction is insulin resistance, associated with abdominal type obesity, hypertension, hyperglycemia and dyslipidemia. Epidemiological data indicates prevalence of MS of about 25%. Estimates point to higher prevalence of MS in bipolar (BP) patients, between 30 to 35%. Cost-effective screening methods, not recurring to blood test, have been researched. Test the viability of MS screening without using blood tests. Analyse knowledge and importance given to the issue of MS in Bipolar patients. Observational, cross-sectional, exploratory study. Random sample of 15 BP patients, in euthymic phase, between 18 and 65 years. Semi-structured interview, YMRS, HAMD were applied. MS diagnosis was investigated according to the International Diabetes Federation (IDF), including blood tests. Screening of MS was defined positive if blood pressure > or = to 130/85 or on anti-hypertensive medication and Abdominal Perimeter > 90 cm in males or > 80 cm in females. Afterwards a questionnaire about knowledge, attitudes and concerns on MS was applied. 14 patients completed the investigation protocol, 1 patient didn't do blood testing for unknown reasons. Five patients (36%) met IDF criteria for MS. Screening sensitivity was 80% and specificity 78% on our sample (1 false positive and 2 false negative). Twelve patients (80%) were overweight or obese. Mean IMC in patients that met IDF criteria for MS was 30 while in the other group mean IMC was 26, showing statistical significance. Only 3 (20%) have ever heard about MS, but the majority of the patients were concerned, in decreasing order, about weight gain, blood pressure cholesterol and hyperglycemia control. Although limited by small sample size, this study strengthens the idea that MS screening can be effective in clinical practice, it also indicates the need to educate BP patients about MS and to prevent overweight.

Microstructural Modification of Sn-0.7Cu Solder Alloys by Fe/Bi-Addition for Achieving High Mechanical Performance

NASA Astrophysics Data System (ADS)

Ali, Bakhtiar; Sabri, Mohd Faizul Mohd; Said, Suhana Mohd; Mahdavifard, Mohammad Hossein; Sukiman, Nazatul Liana; Jauhari, Iswadi

2017-08-01

In this work, we studied the Fe/Bi-bearing tin-copper (Sn-0.7Cu) solders for their microstructural and mechanical properties. The microstructure was studied using field emission scanning electron microscopy (FESEM) with a backscattered electron (BSE) detector, x-ray diffraction (XRD) analysis, and energy-dispersive x-ray spectroscopy (EDX). The microstructure study showed that Fe forms very few FeSn2 intermetallic compounds (IMCs) and does not significantly alter the microstructure of Sn-0.7Cu, whereas Bi controls the size of inter-dendritic regions containing Cu6Sn5 and Ag3Sn IMCs of the alloy, as well as significantly refines its primary β-Sn dendrites. Moreover, Bi atoms dissolve in β-Sn matrix, which in turn strengthen the solder by the Bi solid solution strengthening mechanism. Such microstructural modification leads to significant improvements in various mechanical properties of the alloy, including shear strength, impact toughness, and hardness values. Shear tests were performed with a 0.25 mm/min shear speed. The results showed that shear strength improves from 16.57 MPa to 38.36 MPa with the addition of Fe/Bi to Sn-0.7Cu, raising by about 130%. The energy absorbed during impact tests was measured for samples with the help of a Charpy impact testing machine with a 5.4 m/s impact speed. The results revealed that the addition of Fe/Bi to Sn-0.7Cu improves its impact absorbed energy by over 35%, increasing it from 7.5 J to 10.3 J. Vickers hardness tests were carried out for the test samples with a 245.2 mN applied load and 10 s dwell time. The results showed that the hardness number improves from 9.89 to 24.13 with Fe/Bi to Sn-0.7Cu, increasing by about 140%.

Report by the International Space Station (ISS) Management and Cost Evaluation (IMCE) Task Force

NASA Technical Reports Server (NTRS)

Young, A. Thomas; Kellogg, Yvonne (Technical Monitor)

2001-01-01

The International Space Station (ISS) Management and Cost Evaluation Task Force (IMCE) was chartered to conduct an independent external review and assessment of the ISS cost, budget, and management. In addition, the Task Force was asked to provide recommendations that could provide maximum benefit to the U.S. taxpayers and the International Partners within the President's budget request. The Task Force has made the following principal findings: (1) The ISS Program's technical achievements to date, as represented by on-orbit capability, are extraordinary; (2) The Existing ISS Program Plan for executing the FY 02-06 budget is not credible; (3) The existing deficiencies in management structure, institutional culture, cost estimating, and program control must be acknowledged and corrected for the Program to move forward in a credible fashion; (4) Additional budget flexibility, from within the Office of Space Flight (OSF) must be provided for a credible core complete program; (5) The research support program is proceeding assuming the budget that was in place before the FY02 budget runout reduction of $1B; (6) There are opportunities to maximize research on the core station program with modest cost impact; (7) The U.S. Core Complete configuration (three person crew) as an end-state will not achieve the unique research potential of the ISS; (8) The cost estimates for the U.S.-funded enhancement options (e.g., permanent seven person crew) are not sufficiently developed to assess credibility. After these findings, the Task Force has formulated several primary recommendations which are published here and include: (1) Major changes must be made in how the ISS program is managed; (2) Additional cost reductions are required within the baseline program; (3) Additional funds must be identified and applied from the Human Space Flight budget; (4) A clearly defined program with a credible end-state, agreed to by all stakeholders, must be developed and implemented.

[Neurophysiological Foundations and Practical Realizations of the Brain-Machine Interfaces the Technology in Neurological Rehabilitation].

PubMed

Kaplan, A Ya

2016-01-01

Technology brain-computer interface (BCI) based on the registration and interpretation of EEG has recently become one of the most popular developments in neuroscience and psychophysiology. This is due not only to the intended future use of these technologies in many areas of practical human activity, but also to the fact that IMC--is a completely new paradigm in psychophysiology, allowing test hypotheses about the possibilities of the human brain to the development of skills of interaction with the outside world without the mediation of the motor system, i.e. only with the help of voluntary modulation of EEG generators. This paper examines the theoretical and experimental basis, the current state and prospects of development of training, communicational and assisting complexes based on BCI to control them without muscular effort on the basis of mental commands detected in the EEG of patients with severely impaired speech and motor system.

Symposium on Research and Utilization of Educational Media for Teaching the Deaf: The Educational Media Complex (Nebraska Center for Continuing Education, Lincoln, Nebraska, April 10-12, 1967).

ERIC Educational Resources Information Center

Nebraska Univ., Lincoln. Dept. of Educational Administration.

Papers consider the problems of combining library science and audiovisual education into educational media complexes, or instructional materials centers (IMC's), in schools for the deaf. Areas covered include the concept of such centers, their relationship with the school library, and the personnel, equipment, materials, and production facilities…

CALET Data Processing and On-Orbit Detector Calibration

NASA Astrophysics Data System (ADS)

Asaoka, Yoichi

2016-07-01

The CALET (CALorimetric Electron Telescope), launched to the International Space Station (ISS) in August 2015 and accumulating scientific data since October 2015, aims at long duration observations of high-energy cosmic rays onboard the ISS. The CALET detector features the very thick calorimeter of 30 radiation-length which consists of imaging and total absorption calorimeters (IMC and TASC respectively). It will directly measure the cosmic-ray electron spectrum in the energy range of 1 GeV-20 TeV with 2% energy resolution. In addition, the instrument has capabilities to measure the spectra of gamma-rays, protons and nuclei well into the TeV range. Precise pointing direction is determined with an attached Advanced Stellar Camera (ASC). To operate the CALET onboard ISS, the CALET Ground Support Equipment (CALET-GSE) and Waseda CALET Operations Center (WCOC) have been established at JAXA and Waseda Univ., respectively. Scientific operations of CALET are planned in the WCOC taking into account the orbital variations of geomagnetic rigidity cutoff. Scheduled command sequence is utilized to control CALET observation mode on orbit. A calibration data trigger mode, such as recording pedestal and penetrating particle events, a low-energy electron trigger mode operating at high geomagnetic latitude, and other dedicated trigger modes are scheduled around the ISS orbit while maintaining the maximum exposure to high-energy electrons. Scientific raw data called CALET Level 0 data are generated from raw telemetry packets in the CALET-GSE on an hourly basis by correcting time-order and by completing the data set using stored data taken during loss of real-time telemetry downlink. Level 0 data are processed to CALET Level 1 data in the WCOC by interpreting all the raw packets and building cosmic-ray event data as well as house keeping data. Level 1 data are then distributed to the collaboration for scientific data analysis. Level 1 data analysis is focused on the detector calibration which consists of timing, arrival direction, and energy of incoming cosmic-ray events. Timing calibration is performed using time-pair data generated from the timing of the pulse-per-second (PPS) signal obtained in the GPS receiver. Arrival direction is calculated from the reconstructed track using the ASC data. Alignment of fibers in the IMC and of the TASC with respect to the IMC need to be calibrated. Energy calibration is the most important calibration to measure the cosmic-ray spectra and is based on the energy deposit of minimum ionizing particles (MIP). By using a special trigger mode for penetrating particles, it is possible to calibrate the response of each detector element. Position and temperature dependence of the MIP signal are also measured and corrected in the calibration. By applying all the necessary calibrations, CALET Level 2 data for physics analysis are produced from the Level 1 data. In this contribution, we will review offline data processing and calibration of CALET flight data.

Synthesis, Spectral Characterization, Thermal and Optical Studies of Novel Complexes: 4-(Dimethylamino)benzylidene-4-acetamideaniline and 4-(Dimethylamino)benzylidene-4-nitroaniline.

PubMed

Neupane, Umesh; Rai, R N

2017-11-01

The phase diagram representing solid-liquid equilibrium of entire range of composition and thermodynamic studies of two binary organic systems of 4-dimethylaminobenzaldehyde (DMAB) with two NLO active compounds, p-aminoacetanilide (PAA) and p-nitroaniline (PNA), have been studied by solid state synthetic route. Both systems are independently forming a new entity called intermolecular complex (IMC) and two eutectics on either side of intermolecular complexes. The various thermodynamic parameters such as heat of mixing, entropy of fusion, roughness parameter, interfacial energy and excess thermodynamic functions of IMCs and eutectics were calculated using the heat of fusion values. The TGA and DTA studies were performed to understand the physico-chemical, thermal behavior and unique identity of newly synthesized organic complexes, 4-(dimethylamino)benzylidene-4-acetamideaniline (DMABPAA) and 4-(dimethylamino)benzylidene-4-nitroaniline (DMABPNA), and their respective enthalpy of fusion values were found to be 30.01 and 37.26 kJ mol - 1 . The higher melting point of both the novel complexes than their parent's compounds reveal the strong molecular interaction between parent components to yield the complex. The FTIR spectral analysis predicts the disappearance of aldehyde peaks of DMAB and NH 2 peaks of PAA and PNA while the appearance of entirely new peaks than that of parent's compounds are the supportive for the formation of new molecular entities. These findings are further supported by FTNMR spectrum studies by observation of disappearance of proton peak of aldehyde of DMAB and amine peaks of PAA and PNA rather formation of new imine proton peak or peaks were observed. The appearance of new peaks in Powder XRD of complexes than those of parent components is further indicative for the formation of complexes. The absorption spectrum of DMABPAA and DMABPNA showed intra-molecular charge-transfer (ICT) excited state absorption at 258 and 241 nm, respectively. Both the IMCs, DMABPAA and DMABPNA, show strong fluorescence with quantum yield 0.66 and 0.93, respectively, in methanol solution.

Isothermal microcalorimetry provides new insights into biofilm variability and dynamics.

PubMed

Astasov-Frauenhoffer, Monika; Braissant, Olivier; Hauser-Gerspach, Irmgard; Daniels, Alma U; Weiger, Roland; Waltimo, Tuomas

2012-12-01

The purpose of this study was to investigate a three-species in vitro biofilm with peri-implantitis-related bacteria for its variability and metabolic activity. Streptococcus sanguinis, Fusobacterium nucleatum, and Porphyromonas gingivalis were suspended in simulated body fluid containing 0.2% glucose to form biofilms on polished, protein-coated implant-grade titanium disks over 72 h using a flow chamber system. Thereafter, biofilm-coated disks were characterized by scanning electron microscopy and fluorescence in situ hybridization/confocal laser scanning microscopy. To assess metabolic activity within the biofilms, their heat flow was recorded for 480 h at 37 °C by IMC. The microscopic methods revealed that the total number of bacteria in the biofilms varied slightly among specimens (2.59 × 10(4)  ± 0.67 × 10(4)  cells mm(-2) ), whereas all three species were found constantly with unchanged proportions (S. sanguinis 41.3 ± 4.8%, F. nucleatum 17.7 ± 2.1%, and P. gingivalis 41.0 ± 4.9%). IMC revealed minor differences in time-to-peak heat flow (20.6 ± 4.5 h), a trend consistent with the small variation in bacterial species proportions as shown by microscopy. Peak heat flow (35.8 ± 42.6 μW), mean heat flow (13.1 ± 22.0 μW), and total heat over 480 h (23.5 ± 37.2 J) showed very high variation. These IMC results may be attributed to differences in the initial cell counts and relative proportions of the three species, their distribution and embedment in exopolysaccharide matrix on the test specimens. The present results provide new insights into variability and dynamics of biofilms on titanium disks, aspects that should be explored in future studies of dental surfaces. © 2012 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.

Clinical implementation of AXB from AAA for breast: Plan quality and subvolume analysis.

PubMed

Guebert, Alexandra; Conroy, Leigh; Weppler, Sarah; Alghamdi, Majed; Conway, Jessica; Harper, Lindsay; Phan, Tien; Olivotto, Ivo A; Smith, Wendy L; Quirk, Sarah

2018-05-01

Two dose calculation algorithms are available in Varian Eclipse software: Anisotropic Analytical Algorithm (AAA) and Acuros External Beam (AXB). Many Varian Eclipse-based centers have access to AXB; however, a thorough understanding of how it will affect plan characteristics and, subsequently, clinical practice is necessary prior to implementation. We characterized the difference in breast plan quality between AXB and AAA for dissemination to clinicians during implementation. Locoregional irradiation plans were created with AAA for 30 breast cancer patients with a prescription dose of 50 Gy to the breast and 45 Gy to the regional node, in 25 fractions. The internal mammary chain (IMC CTV ) nodes were covered by 80% of the breast dose. AXB, both dose-to-water and dose-to-medium reporting, was used to recalculate plans while maintaining constant monitor units. Target coverage and organ-at-risk doses were compared between the two algorithms using dose-volume parameters. An analysis to assess location-specific changes was performed by dividing the breast into nine subvolumes in the superior-inferior and left-right directions. There were minimal differences found between the AXB and AAA calculated plans. The median difference between AXB and AAA for breast CTV V 95% , was <2.5%. For IMC CTV , the median differences V 95% , and V 80% were <5% and 0%, respectively; indicating IMC CTV coverage only decreased when marginally covered. Mean superficial dose increased by a median of 3.2 Gy. In the subvolume analysis, the medial subvolumes were "hotter" when recalculated with AXB and the lateral subvolumes "cooler" with AXB; however, all differences were within 2 Gy. We observed minimal difference in magnitude and spatial distribution of dose when comparing the two algorithms. The largest observable differences occurred in superficial dose regions. Therefore, clinical implementation of AXB from AAA for breast radiotherapy is not expected to result in changes in clinical practice for prescribing or planning breast radiotherapy. © 2018 The Authors. Journal of Applied Clinical Medical Physics published by Wiley Periodicals, Inc. on behalf of American Association of Physicists in Medicine.

Aviation System Capacity Program Terminal Area Productivity Project: Ground and Airborne Technologies

NASA Technical Reports Server (NTRS)

Giulianetti, Demo J.

2001-01-01

Ground and airborne technologies were developed in the Terminal Area Productivity (TAP) project for increasing throughput at major airports by safely maintaining good-weather operating capacity during bad weather. Methods were demonstrated for accurately predicting vortices to prevent wake-turbulence encounters and to reduce in-trail separation requirements for aircraft approaching the same runway for landing. Technology was demonstrated that safely enabled independent simultaneous approaches in poor weather conditions to parallel runways spaced less than 3,400 ft apart. Guidance, control, and situation-awareness systems were developed to reduce congestion in airport surface operations resulting from the increased throughput, particularly during night and instrument meteorological conditions (IMC). These systems decreased runway occupancy time by safely and smoothly decelerating the aircraft, increasing taxi speed, and safely steering the aircraft off the runway. Simulations were performed in which optimal trajectories were determined by air traffic control (ATC) and communicated to flight crews by means of Center TRACON Automation System/Flight Management System (CTASFMS) automation to reduce flight delays, increase throughput, and ensure flight safety.

[Treatment of overweight. Use of a program].

PubMed

López de la Llave y Rodríguez, A; Ruiz González, M D; Conejo Olmedilla, M A

1998-01-01

This article publicizes the results of an overweight treatment program carried out as a working model under the auspices of Primary Health Care. This program placed special emphasis on educational aspects, preventive as well as promoting healthy ways of living; and one in which activities planned towards establishing means of conduct which play a direct role in their users health factors are focused on. This treatment program occurred as a group activity. The 27 participating subjects, 23 women and 4 men, were recommended by their doctor/nurse. Their average age was 37.6 years, +/- 11.3. 19 subjects were overweight with an IMC between 25 and 30; the other 8 had been diagnosed as obese with an IMC over 30. This program took place in the Health Center meeting hall over 4 months, from February through June. Among the elements of this program, these deserve special mention: the use of a vocabulary exempt of adverse connotations, for example, instead of diet we spoke of menus; the establishment of behavioral goals before weight loss goals; the practice of elaborating and designing hypercaloric menus; providing positive reinforcement for those behaviors which increased the level of physical activity which was objectively measured by means of podometers; the practice of eating slowly; etc. At the end of the program, the results showed an average weight loss of 4.2 kilograms, a range of 0.9 to 6.12 K, with respect to the average weight at the start of the program. One can foresee that this loss will continue to occur, especially in those cases where the subject had modified some habits such as eating rapidly or performing physical exercise related to overweightness. These results are open to discussion regarding the efficiency of the program and with regards to this program as an example of a coordinated effort between the Mental Health Unit and a Primary Health Care Team in relation to the design and implementation of health programs directed towards the attention of people with overweight problems.

Function Allocation in a Robust Distributed Real-Time Environment

DTIC Science & Technology

1991-12-01

fundamental characteristic of a distributed system is its ability to map individual logical functions of an application program onto many physical nodes... how much of a node’s processor time is scheduled for function processing. IMC is the function- to -function communication required to facilitate...indicator of how much excess processor time a node has. The reconfiguration algorithms use these variables to determine the most appropriate node(s) to

Enhancing Public Helicopter Safety as a Component of Homeland Security

DTIC Science & Technology

2016-12-01

Risk Assessment Tool GPS Global Positioning System IFR instrument flight rules ILS instrument landing system IMC instrument meteorological...flight rules ( IFR ) flying and the lack of a pre-flight risk assessment. Pilot fatigue is a factor that appeared in two of the accident reports (New...three common factors that emerged from the qualitative analysis of coding: inadequate proficiency of IFR flying, lack of a pre- flight risk assessment

Serine proteases as candidates for proteolytic processing of angiotensin-I converting enzyme.

PubMed

Aragão, Danielle S; de Andrade, Maria Claudina C; Ebihara, Fabiana; Watanabe, Ingrid K M; Magalhães, Dayane C B P; Juliano, Maria Aparecida; Hirata, Izaura Yoshico; Casarini, Dulce Elena

2015-01-01

Somatic angiotensin-I converting enzyme (sACE) is a broadly distributed peptidase which plays a role in blood pressure and electrolyte homeostasis by the conversion of angiotensin I into angiotensin II. N-domain isoforms (nACE) with 65 and 90 kDa have been described in body fluids, tissues and mesangial cells (MC), and a 90 kDa nACE has been described only in spontaneously hypertensive rats. The aim of this study was to investigate the existence of proteolytic enzymes that may act in the hydrolysis of sACE generating nACEs in MC. After the confirmation of the presence of ACE sheddases in Immortalized MC (IMC), we purified and characterized these enzymes using fluorogenic substrates specifically designed for ACE sheddases. Purified enzyme identified as a serine protease by N-terminal sequence was able to generate nACE. In the present study, we described for the first time the presence of ACE sheddases in IMC, identified as serine proteases able to hydrolyze sACE in vitro. Further investigations are necessary to elucidate the mechanisms responsible for the expression and regulation of ACE sheddases in MC and their roles in the generation of nACEs, especially the 90 kDa form possibly related to hypertension. Copyright © 2014 Elsevier B.V. All rights reserved.

Soldering-induced Cu diffusion and intermetallic compound formation between Ni/Cu under bump metallization and SnPb flip-chip solder bumps

NASA Astrophysics Data System (ADS)

Huang, Chien-Sheng; Jang, Guh-Yaw; Duh, Jenq-Gong

2004-04-01

Nickel-based under bump metallization (UBM) has been widely used as a diffusion barrier to prevent the rapid reaction between the Cu conductor and Sn-based solders. In this study, joints with and without solder after heat treatments were employed to evaluate the diffusion behavior of Cu in the 63Sn-37Pb/Ni/Cu/Ti/Si3N4/Si multilayer structure. The atomic flux of Cu diffused through Ni was evaluated from the concentration profiles of Cu in solder joints. During reflow, the atomic flux of Cu was on the order of 1015-1016 atoms/cm2s. However, in the assembly without solder, no Cu was detected on the surface of Ni even after ten cycles of reflow. The diffusion behavior of Cu during heat treatments was studied, and the soldering-process-induced Cu diffusion through Ni metallization was characterized. In addition, the effect of Cu content in the solder near the solder/intermetallic compound (IMC) interface on interfacial reactions between the solder and the Ni/Cu UBM was also discussed. It is evident that the (Cu,Ni)6Sn5 IMC might form as the concentration of Cu in the Sn-Cu-Ni alloy exceeds 0.6 wt.%.

A Comparative Study on the Microstructure and Mechanical Properties of Cu6Sn5 and Cu3Sn Joints Formed by TLP Soldering With/Without the Assistance of Ultrasonic Waves

NASA Astrophysics Data System (ADS)

Zhao, H. Y.; Liu, J. H.; Li, Z. L.; Song, X. G.; Zhao, Y. X.; Niu, H. W.; Tian, H.; Dong, H. J.; Feng, J. C.

2018-07-01

In this study, the microstructure and mechanical properties of Cu6Sn5 and Cu3Sn intermetallic joints, formed by the transient liquid phase (TLP) soldering process with and without the assistance of ultrasonic waves (USWs), were compared. After the application of USWs in the TLP soldering process, Cu-Sn intermetallic compounds (IMCs) exhibited a novel noninterfacial growth pattern in the molten solder interlayer. The resulting Cu6Sn5 and Cu3Sn joints consisted of refined equiaxed IMC grains with average sizes of 3 and 2.3 µm, respectively. The Cu6Sn5 grains in the ultrasonically soldered intermetallic joints demonstrated uniform mechanical properties with elastic modulus and hardness values of 123.0 and 5.98 GPa, respectively, while those of Cu3Sn grains were 133.9 and 5.08 GPa, respectively. The shear strengths of ultrasonically soldered Cu6Sn5 and Cu3Sn joints were measured to be 60 and 65 MPa, respectively, higher than that for reflow-soldered intermetallic joints. Ultrasonically soldered Cu6Sn5 and Cu3Sn joints both exhibited a combination of transgranular and intergranular fractures during shear testing.

Microstructural behavior of iron and bismuth added Sn-1Ag-Cu solder under elevated temperature aging

NASA Astrophysics Data System (ADS)

Ali, Bakhtiar; Sabri, Mohd Faizul Mohd; Jauhari, Iswadi

2016-07-01

An extensive study was done to investigate the microstructural behavior of iron (Fe) and bismuth (Bi) added Sn-1Ag-0.5Cu (SAC105) under severe thermal aging conditions. The isothermal aging was done at 200 °C for 100 h, 200 h, and 300 h. Optical microscopy with cross-polarized light revealed that the grain size significantly reduces with Fe/Bi addition to the base alloy SAC105 and remains literally the same after thermal aging. The micrographs of field emission scanning electron microscopy (FESEM) with backscattered electron detector and their further analysis via imageJ software indicated that Fe/Bi added SAC105 showed a significant reduction in the IMCs size (Ag3Sn and Cu6Sn5), especially the Cu6Sn5 IMCs, as well as β-Sn matrix and a refinement in the microstructure, which is due to the presence of Bi in the alloys. Moreover, their microstructure remains much more stable under severe thermal aging conditions, which is because of the presence of both Fe and Bi in the alloy. The microstructural behavior suggests that Fe/Bi modified SAC105 would have much improved reliability under severe thermal environments. These modified alloys also have relatively low melting temperature and low cost.

The nucleation and growth mechanism of Ni-Sn eutectic in a single crystal superalloy

NASA Astrophysics Data System (ADS)

Jiang, Weiguo; Wang, Li; Li, Xiangwei; Lou, Langhong

2017-12-01

The microstructure of single crystal superalloy with and without tin layer on the surface of as-cast and heat-treatment state was investigated by optical microscope (OM) and scanning electron microscopy (SEM). The composition of different regions on the surface was tested by energy dispersive X-ray (EDS). The reaction intermetallic compound (IMC) formed in the heat treatment process was confirmed by X-ray diffraction (XRD). The orientations of different microstructure in samples as heat treatment state were determined by electron back-scattering diffraction (EBSD) method. The porosity location in the interdendritic region was observed by X-ray computed tomography (XCT). The experiment results showed that the remained Sn on the surface of the superalloy reacted with Ni, and then formed Ni3Sn4 in the as-cast state. Sn enriched by diffusion along the porosity located in the interdendritic region and γ + γ‧ (contain a little of Sn) eutectic and Ni3Sn2 formed in single crystal superalloy during heat treatment, and the recalescence behaviors were found. Ni3Sn2 nucleated independently in the cooled liquid at the front of (γ + γ‧) (Sn) eutectic. The nucleation and growth mechanism of the eutectic and Ni3Sn2 IMC during heat treatment was discussed in the present paper.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chen, Jianbin

The microstructure and mechanical properties of resistance-spot-welded A5052 aluminum alloy and DP 600 dual-phase steel joint were studied. The fusion zone (FZ) and heat-affected zone (HAZ) of DP 600 exhibited lath martensite and ferrite-martensite structures, respectively. The microstructure of FZ and HAZ in the A5052 side was composed of cellular crystals and the boundary region of FZ exhibited a columnar crystal morphology. A Fe{sub 2}Al{sub 5} intermetallic compound (IMC) layer with 3.3 μm thickness was found adjacent to the DP 600 side, whereas a needle-shaped Fe{sub 4}Al{sub 13} IMC layer with length of 0.67 μm to 15.8 μm was foundmore » adjacent to the aluminum alloy side. The maximum tensile shear load of the A5052/DP 600 joint was 5.5 KN, with a corresponding molten nugget diameter of 6.3 mm. The fracture morphology of the optimized A5052/DP 600 joint was mainly an elongated dimple fracture accompanied by cleavage fracture. - Highlights: •A5052 and DP 600 with large gaps in properties were investigated by RSW. •The microstructures of RSW joints in DP 600/A5052 were examined detailedly. •The micro/macro-characteristics and strength relations of joints were analyzed.« less

Reliability Assessment and Activation Energy Study of Au and Pd-Coated Cu Wires Post High Temperature Aging in Nanoscale Semiconductor Packaging.

PubMed

Gan, C L; Hashim, U

2013-06-01

Wearout reliability and high temperature storage life (HTSL) activation energy of Au and Pd-coated Cu (PdCu) ball bonds are useful technical information for Cu wire deployment in nanoscale semiconductor device packaging. This paper discusses the influence of wire type on the wearout reliability performance of Au and PdCu wire used in fine pitch BGA package after HTSL stress at various aging temperatures. Failure analysis has been conducted to identify the failure mechanism after HTSL wearout conditions for Au and PdCu ball bonds. Apparent activation energies (Eaa) of both wire types are investigated after HTSL test at 150 °C, 175 °C and 200 °C aging temperatures. Arrhenius plot has been plotted for each ball bond types and the calculated Eaa of PdCu ball bond is 0.85 eV and 1.10 eV for Au ball bond in 110 nm semiconductor device. Obviously Au ball bond is identified with faster IMC formation rate with IMC Kirkendall voiding while PdCu wire exhibits equivalent wearout and or better wearout reliability margin compare to conventional Au wirebond. Lognormal plots have been established and its mean to failure (t 50 ) have been discussed in this paper.

Characteristics of the oceanic MCC, continental MCC, and coastal MCC over the Indonesian maritime continent

NASA Astrophysics Data System (ADS)

Trismidianto

2018-05-01

This study explains the comparison of mesoscale convective complexes (MCC) characteristics in the oceans, land and in the coast over Indonesian maritime continent (IMC). MCCs were identified and tracked during 15-years (2001-2015) over IMC by infrared satellite imagery using an algorithm that combines criteria of cloud coverage, eccentricity, and cloud lifetime. Infrared satellite imagery was obtained from Himawari generation satellite data. This study showed most of the continental MCC found near the mountains and the high elevation areas. The frequency of MCC occurrences was larger over the land than over the ocean. The oceanic MCCs, which lasted for more than 12 hours, were longer-lived than the continental MCCs. The MCCs with small size most frequently occurred in the continent, in contrast, the MCC with the medium and large size were most concentrated over the ocean. Generally, the continental and coastal MCC initiation occurs in the late afternoon and reach maximum size around midnight before decaying the next morning. In contrast, the oceanic MCC dominantly develops in midnight, and reach maximum size in the morning and then MCC decayed and dissipated from noon until afternoon. The evolution of MCC development in the ocean, land, and in the coast has almost the same stages and ways.

Effect of genotype of cocoa (Theobroma cacao) on attractiveness to the mirid Sahlbergella singularis (Hemiptera: Miridae) in the laboratory.

PubMed

Dibog, Luc; Babin, Régis; Mbang, Joseph Amang A; Decazy, Bernard; Nyassé, Salomon; Cilas, Christian; Eskes, Albertus B

2008-09-01

Mirids are a major constraint to cocoa growing in Africa. Cocoa breeding for tolerance/resistance could be effective in an integrated pest management system. Attractiveness is one aspect of tolerance/resistance, and decreasing the attractiveness of cocoa trees should be a good way of reducing damage. Small-scale laboratory tests were carried out in Cameroon to assess differences in the attractiveness to mirids of eleven cocoa genotypes. The genotypes were ranked according to their attractiveness score and a distance from a mean value. An analysis of variance was performed and revealed significant differences between cocoa genotypes (F=3.15, P<0.001). The cocoa genotype groupings revealed three major categories, with BE10 and SNK413 proving to be the most attractive. In contrast, five genotypes, IMC60, the Catongo Trinitario genotypes, Playa Alta2 (from Venezuela), SIC5 and SNK614, proved to be less attractive than the mean. Four genotypes (PA107, SNK619, UPA134 and T60/887) displayed similar attractiveness to the mean. The circular microtest offered the advantage of not needing a reference cocoa genotype. The least attractive clones, such as IMC60, were also the most tolerant in the field. Comparisons with the results of other studies are proposed.

Inhibitory effect of Pistia tannin on digestive enzymes of Indian major carps: an in vitro study.

PubMed

Mandal, Sudipta; Ghosh, Koushik

2010-12-01

Aquatic weeds are one of the major unconventional feed ingredients tested for aquafeed formulation. Tannin content in the water lettuce, Pistia, has been quantified (26.67 mg g(-1); dry weight) and graded levels of which (12.5-200 μg) have been incorporated in the reaction mixtures to evaluate any change in the in vitro activity of the principal digestive enzymes from the three Indian major carps (IMC), namely rohu (Labeo rohita), catla (Catla catla) and mrigala (Cirrhinus mrigala). Result of the experiment revealed that the Pistia tannin (PT) significantly inhibit/lower the activities of the digestive enzymes from three IMCs in a dose-dependent manner, even at very low concentration. Significant variation in the reduction of the enzyme activities was noticed between the three fish species, as well as between the three enzymes studied. Among the three species studied, digestive enzymes from L. rohita were found to be the most sensitive to the PT, whereas enzymes from C. catla were found to be comparatively least affected. On the other hand, protease and lipase activities were comparatively more affected than the amylase activity. The results of the study suggest that more stress should be given on the elimination of tannin while incorporating feed ingredients of plant origin in fish diets.

Intermetallic Growth Induced Large-Scale Void Growth and Cracking Failure in Line-Type Cu/Solder/Cu Joints Under Current Stressing

NASA Astrophysics Data System (ADS)

Chen, Zhuo; Tian, Wenya; Li, Junhui; Zhu, Wenhui

2018-04-01

In order to study the electromigration (EM) behavior of solder joints in electronics packaging, especially under high-current and high-temperature working conditions, line-type Cu/solder/Cu butting samples were prepared to observe the microstructural evolution under 1.0 × 104 A/cm2 current stressing. A prominent polarity effect was found such that the Cu6Sn5 intermetallic compound (IMC) layer at the anode side, which thickened linearly with time, was much thicker than that at the cathode side. Compared to the samples subjected to thermal aging at the same temperature of 180°C, EM enhanced the Cu3Sn growth at both the anode and the cathode. Two distinct types of damage were observed after extended duration of current stressing. Back-flow of Cu into Cu3Sn was found at the Cu3Sn/Cu6Sn5 interface of the anode side, causing large voids, while strip cracks developed at the cathode solder/Cu6Sn5 interface, causing a significant increase of joint electrical resistance. With the mass transport characteristics that determine the IMC growth and vacancy accumulation analyzed in detail at each interface, formation mechanisms of the two types of damages are discussed.

A Comparative Study on the Microstructure and Mechanical Properties of Cu6Sn5 and Cu3Sn Joints Formed by TLP Soldering With/Without the Assistance of Ultrasonic Waves

NASA Astrophysics Data System (ADS)

Zhao, H. Y.; Liu, J. H.; Li, Z. L.; Song, X. G.; Zhao, Y. X.; Niu, H. W.; Tian, H.; Dong, H. J.; Feng, J. C.

2018-05-01

In this study, the microstructure and mechanical properties of Cu6Sn5 and Cu3Sn intermetallic joints, formed by the transient liquid phase (TLP) soldering process with and without the assistance of ultrasonic waves (USWs), were compared. After the application of USWs in the TLP soldering process, Cu-Sn intermetallic compounds (IMCs) exhibited a novel noninterfacial growth pattern in the molten solder interlayer. The resulting Cu6Sn5 and Cu3Sn joints consisted of refined equiaxed IMC grains with average sizes of 3 and 2.3 µm, respectively. The Cu6Sn5 grains in the ultrasonically soldered intermetallic joints demonstrated uniform mechanical properties with elastic modulus and hardness values of 123.0 and 5.98 GPa, respectively, while those of Cu3Sn grains were 133.9 and 5.08 GPa, respectively. The shear strengths of ultrasonically soldered Cu6Sn5 and Cu3Sn joints were measured to be 60 and 65 MPa, respectively, higher than that for reflow-soldered intermetallic joints. Ultrasonically soldered Cu6Sn5 and Cu3Sn joints both exhibited a combination of transgranular and intergranular fractures during shear testing.

Combined Thermodynamic-Kinetic Analysis of the Interfacial Reactions between Ni Metallization and Various Lead-Free Solders

PubMed Central

Laurila, Tomi; Vuorinen, Vesa

2009-01-01

In this paper we will demonstrate how a thermodynamic-kinetic method can be utilized to rationalize a wide range of interfacial phenomena between Sn-based lead-free solders and Ni metallizations. First, the effect of P on the interfacial reactions, and thus on the reliability, between Sn-based solders and electroless Ni/immersion Au (ENIG) metallizations, will be discussed. Next, the effect of small amounts of Cu in Sn-based solders on the intermetallic compound (IMC), which forms first on top of Ni metallization, will be covered. With the help of thermodynamic arguments a so called critical Cu concentration for the formation of (Cu,Ni)6Sn5 can be determined as a function of temperature. Then the important phenomenon of redeposition of (Au,Ni)Sn4 layer on top of Ni3Sn4 IMC will be discussed in detail. The reasons leading to this behaviour will be rationalized with the help of thermodynamic information and an explanation of why this phenomenon does not occur when an appropriate amount of Cu is present in the soldering system will be given. Finally, interfacial reaction issues related to low temperature Sn-Zn and Sn-Bi based solders and Ni metallization will be discussed.

Probabilistic power flow using improved Monte Carlo simulation method with correlated wind sources

NASA Astrophysics Data System (ADS)

Bie, Pei; Zhang, Buhan; Li, Hang; Deng, Weisi; Wu, Jiasi

2017-01-01

Probabilistic Power Flow (PPF) is a very useful tool for power system steady-state analysis. However, the correlation among different random injection power (like wind power) brings great difficulties to calculate PPF. Monte Carlo simulation (MCS) and analytical methods are two commonly used methods to solve PPF. MCS has high accuracy but is very time consuming. Analytical method like cumulants method (CM) has high computing efficiency but the cumulants calculating is not convenient when wind power output does not obey any typical distribution, especially when correlated wind sources are considered. In this paper, an Improved Monte Carlo simulation method (IMCS) is proposed. The joint empirical distribution is applied to model different wind power output. This method combines the advantages of both MCS and analytical method. It not only has high computing efficiency, but also can provide solutions with enough accuracy, which is very suitable for on-line analysis.

The future of UK/Irish surgery: A European solution.

PubMed

Varzgalis, M; Kerin, M J; Sweeney, K J

2015-11-01

The United Kingdom (UK) and Republic of Ireland (ROI) hospital systems are dependent on junior doctors for their functionality however it is increasingly difficult to recruit UK/ROI trained doctors to fill these posts. Directive 2005/36/EC, which came into force in 2007, is the principal European legislation on the recognition of equivalence of professional qualifications across Europe. European trained doctors are therefore attractive candidates for junior doctor posts. However, although their training is recognised as equivalent by the Irish Medical Council (IMC) and General Medical Council (GMC) they are not being appointed to equivalent posts by the Health Service Executive (HSE) or National Health Service (NHS). With the influence of European Union (EU) centralisation, modification of UK/ROI consultant grade is imminent, possibly to pyramidal structure of the Continental European model with clearer lines of corporate responsibility. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

Acoustic dynamics of supercooled indomethacin probed by Brillouin light scattering.

PubMed

De Panfilis, S; Pogna, E A A; Virga, A; Scopigno, T

2014-07-21

Acoustics dynamics of the molecular glass-former indomethacin (IMC) have been investigated by Brillouin light scattering (BLS) at GHz frequencies. Elastic response of the system has been tracked from the melting temperature down to the glass transition through the supercooled liquid. Both the structural arrest and the vibrational dynamics are described by modeling the experimentally determined dynamic structure factor within the framework of the Langevin equation, through a simplified choice of memory function which allows one to determine sound velocity and the acoustic attenuation coefficient as a function of temperature. The density fluctuation spectra in the glassy phase, as probed by BLS, are compared with time-domain results from photoacoustics experiments. The arising scenario is discussed in the context of current literature reporting inelastic X-ray scattering and BLS in platelet geometry. The link between the probed elastic properties and the non-ergodicity factor of the glass phase is finally scrutinized.

Representing Network Trust and Using It to Improve Anonymous Communication

DTIC Science & Technology

2014-07-01

identified by that behavior . References 1. Augustin, B., Krishnamurthy, B., Willinger, W.: IXPs: Mapped? In: Internet Mea- surement Conference ( IMC ’09...empty attributes (e.g., labeling countries by their larger geographic region). The user’s beliefs may incorporate boolean predicates that are evaluated on...and behaviors are. The most useful information about Tor relays for setting a default level of trust is probably relay longevity. Running a relay in

A Report on the Knowledge Development Goals of the Illinois Migrant Council Midwest Youth Employment and Training Program for Migrant and Seasonal Farmworkers; Fiscal Years 1978 through 1981.

ERIC Educational Resources Information Center

Laylo, Peter R.; Woodruff, Bradley A.

Knowledge development goals were built into the Illinois Migrant Council (IMC) Midwest Youth Employment Training Program (MYETP) to gain information and insights on the status and conditions of the migrant and seasonal farmworker (MSFW) youth, and to assist in the design and content of programs to improve their economic, educational, and social…

Influence of Li Addition to Zn-Al Alloys on Cu Substrate During Spreading Test and After Aging Treatment

NASA Astrophysics Data System (ADS)

Gancarz, Tomasz; Pstrus, Janusz; Cempura, Grzegorz; Berent, Katarzyna

2016-12-01

The spreading of Zn-Al eutectic-based alloys with 0.05 wt.%, 0.1 wt.%, and 0.2 wt.% Li on Cu substrate has been studied using the sessile drop method in presence of QJ201 flux. Wetting tests were performed after 1 min, 3 min, 8 min, 15 min, 30 min, and 60 min of contact at temperatures of 475°C, 500°C, 525°C, and 550°C. Samples after spreading at 500°C for 1 min were subjected to aging for 1 day, 10 days, and 30 days at temperature of 120°C, 170°C, and 250°C. The spreadability of eutectic Zn-5.3Al alloy with different Li contents on Cu substrate was determined in accordance with ISO 9455-10:2013-03. Selected solidified solder-substrate couples were, after spreading and aging tests, cross-sectioned and subjected to scanning electron microscopy, energy-dispersive spectroscopy (EDS), and x-ray diffraction (XRD) analysis of the interfacial microstructure. An experiment was designed to demonstrate the effect of Li addition on the kinetics of the formation and growth of CuZn, Cu5Zn8, and CuZn4 intermetallic compound (IMC) phases, during spreading and aging. The IMC layers formed at the interface were identified using XRD and EDS analyses. Increasing addition of Li to Zn-Al alloy caused a reduction in the thickness of the IMC layer at the interface during spreading, and an increase during aging. The activation energy was calculated, being found to increase for the Cu5Zn8 phase but decrease for the CuZn and CuZn4 phases with increasing Li content in the Zn-Al-Li alloys. The highest value of 142 kJ mol-1 was obtained for Zn-Al with 1.0 Li during spreading and 69.2 kJ mol-1 for Zn-Al with 0.05 Li during aging. Aging at 250°C caused an increase in only the Cu5Zn8 layer, which has the lowest Gibbs energy in the Cu-Zn system. This result is connected to the high diffusion of Cu from the substrate to the solder.

Adsorption and oxidation of 3-nitro-1,2,4-triazole-5-one (NTO) and its transformation product (3-amino-1,2,4-triazole-5-one, ATO) at ferrihydrite and birnessite surfaces.

PubMed

Khatiwada, Raju; Abrell, Leif; Li, Guangbin; Root, Robert A; Sierra-Alvarez, Reyes; Field, James A; Chorover, Jon

2018-05-05

The emerging insensitive munitions compound (IMC) 3-nitro-1,2,4-triazole-5-one (NTO) is currently being used to replace conventional explosives such as 1,3,5-trinitro-1,3,5-triazacyclohexane (RDX), but the environmental fate of this increasingly widespread IMC remains poorly understood. Upon release from unexploded solid phase ordinances, NTO exhibits high aqueous solubility and, hence, potential mobilization to groundwater. Adsorption and abiotic transformation at metal oxide surfaces are possible mechanisms for natural attenuation. Here, the reactions at ferrihydrite and birnessite surfaces of NTO and its biotransformation product, 3-amino-1, 2, 4-triazol-5-one (ATO), were studied in stirred batch reactor systems at controlled pH (7.0). The study was carried out at metal oxide solid to solution ratios (SSR) of 0.15, 1.5 and 15 g kg -1 . The samples were collected at various time intervals up to 3 h after reaction initiation, and analyzed using HPLC with photodiode array and mass spectrometric detection. We found no detectable adsorption or transformation of NTO upon reaction with birnessite, whereas ATO was highly susceptible to oxidation by the same mineral, showing nearly complete transformation within 5 min at 15 g kg -1 SSR to urea, CO 2(g) and N 2(g) . The mean surface-area-normalized pseudo-first order rate constant (k) for ATO oxidation by birnessite across all SSRs was 0.05 ± 0.022 h -1  m -2 , and oxidation kinetics were independent of dissolved O 2 concentration. Both NTO and ATO were resistant to oxidation by ferrihydrite. However, NTO showed partial removal from solution upon reaction with ferrihydrite at 0.15 and 1.5 g kg -1 SSR and complete loss at 15 g kg -1 SSR due to strong adsorption. Conversely, ATO adsorption to ferrihydrite was much weaker than that measured for NTO. Copyright © 2018. Published by Elsevier Ltd.

Advanced integrated enhanced vision systems

NASA Astrophysics Data System (ADS)

Kerr, J. R.; Luk, Chiu H.; Hammerstrom, Dan; Pavel, Misha

2003-09-01

In anticipation of its ultimate role in transport, business and rotary wing aircraft, we clarify the role of Enhanced Vision Systems (EVS): how the output data will be utilized, appropriate architecture for total avionics integration, pilot and control interfaces, and operational utilization. Ground-map (database) correlation is critical, and we suggest that "synthetic vision" is simply a subset of the monitor/guidance interface issue. The core of integrated EVS is its sensor processor. In order to approximate optimal, Bayesian multi-sensor fusion and ground correlation functionality in real time, we are developing a neural net approach utilizing human visual pathway and self-organizing, associative-engine processing. In addition to EVS/SVS imagery, outputs will include sensor-based navigation and attitude signals as well as hazard detection. A system architecture is described, encompassing an all-weather sensor suite; advanced processing technology; intertial, GPS and other avionics inputs; and pilot and machine interfaces. Issues of total-system accuracy and integrity are addressed, as well as flight operational aspects relating to both civil certification and military applications in IMC.

Leveraging Client-Side DNS Failure Patterns to Identify Malicious Behaviors

DTIC Science & Technology

2015-09-28

malicious behavior found in our dataset and (ii) to create ground truth to evaluate the system proposed in Section V. We begin by removing those cases that...2011. [10] S. Hao, N. Feamster, and R. Pandrangi, “Monitoring the Initial DNS Behavior of Malicious Domains,” in ACM IMC , 2011. [11] R. Perdisci et...distribution is unlimited. Leveraging Client-Side DNS Failure Patterns to Identify Malicious Behaviors The views, opinions and/or findings contained in

Non-Contact Circuit for Real-Time Electric and Magnetic Field Measurements

DTIC Science & Technology

2015-10-01

addresses these needs, and additionally has “smart” features that adjust integrated circuits ( ICs ) on the sensor during start-up based upon the...Hall effect sensors, the datasheet information on the MLX91205 gives a dynamic range of 66 to 96 dB for frequencies of 10 Hz and 10 kHz, respectively...Electric Field Sensors. 18 August 2009. 4. Melexis. IMC-Hall Current Sensor, MLX91205 Datasheet . June. 2012 5. Vinci SJ, Hull DM. Electrostatic

[The clinico-epidemiological premises for antioxidant prevention and treatment in chronic myocardial infarct].

PubMed

Azoicăi, D; Mitu, F; Iacobovici, A; Pavel, M; Jerca, L; Ungureanu, D; Popovici, I; Cojocaru, M; Ivan, A; Gheorghiţă, N

1996-01-01

The improvement of therapeutic and recoverable proceeding to chronic myocardial infarction (IMC) imposes a complex epidemiological estimation of the global cardiovascular risk, of their clinical and biological status. The retrospective evaluation of the risk factors (RF) by epidemiological methods, in 38 hospitalized prevalence of both constitutional and behavioral factors, and the quantification of the risk state, according to graph Euro 194, has pointed on the fact that 50% of IMC cases have presented a global risk of 10-20%. That justified the application of a preventive conduct in order to continually neutralize the associates FR. The biochemical determinations have allowed to frame the dyslipidemic patients, according to the ARCOL classification in the classes D (29.2%), E (25.0%) and B (20.8%) with direct implication in the adopted therapy. The colorimetric dozing with thyo-barbituric acid of the malonly dialdehyde (MAD) each is a product of the lipidic peroxidation, as well as the interpreting or correlation of the registered values with an evolutive clinic stage, and with the existence of some existing diseases (diabetes, chronic hepatitis etc.) along with signification of other dismethabolical parameters (cholesterol, triglycerides, LDLc, apoB) have confirmed the necessity of a complex therapy, including an antioxidative treatment, having the role to directly inhibit or exclude the free radicals resulted after the oxidative stress of the infarct.

Autocrine stimulation of VEGFR-2 activates human leukemic cell growth and migration

PubMed Central

Dias, Sergio; Hattori, Koichi; Zhu, Zhenping; Heissig, Beate; Choy, Margaret; Lane, William; Wu, Yan; Chadburn, Amy; Hyjek, Elizabeth; Gill, Muhammad; Hicklin, Daniel J.; Witte, Larry; Moore, M.A.S.; Rafii, Shahin

2000-01-01

Emerging data suggest that VEGF receptors are expressed by endothelial cells as well as hematopoietic stem cells. Therefore, we hypothesized that functional VEGF receptors may also be expressed in malignant counterparts of hematopoietic stem cells such as leukemias. We demonstrate that certain leukemias not only produce VEGF but also express functional VEGFR-2 in vivo and in vitro, resulting in the generation of an autocrine loop that may support leukemic cell survival and proliferation. Approximately 50% of freshly isolated leukemias expressed mRNA and protein for VEGFR-2. VEGF165 induced phosphorylation of VEGFR-2 and increased proliferation of leukemic cells, demonstrating these receptors were functional. VEGF165 also induced the expression of MMP-9 by leukemic cells and promoted their migration through reconstituted basement membrane. The neutralizing mAb IMC-1C11, specific to human VEGFR-2, inhibited leukemic cell survival in vitro and blocked VEGF165-mediated proliferation of leukemic cells and VEGF-induced leukemic cell migration. Xenotransplantation of primary leukemias and leukemic cell lines into immunocompromised nonobese diabetic mice resulted in significant elevation of human, but not murine, VEGF in plasma and death of inoculated mice within 3 weeks. Injection of IMC-1C11 inhibited proliferation of xenotransplanted human leukemias and significantly increased the survival of inoculated mice. Interruption of signaling by VEGFRs, particularly VEGFR-2, may provide a novel strategy for inhibiting leukemic cell proliferation. PMID:10953026

Fabrication of Cu-Ni mixed phase layer using DC electroplating and suppression of Kirkendall voids in Sn-Ag-Cu solder joints

NASA Astrophysics Data System (ADS)

Chee, Sang-Soo; Lee, Jong-Hyun

2014-05-01

A solderable layer concurrently containing Cu-rich and Ni-rich phases (mixed-phase layer, MPL) was fabricated by direct current electroplating under varying process conditions. Current density was considered as the main parameter to adjust the microstructure and composition of MPL during the electroplating process, and deposit thickness were evaluated as functions of plating time. As a result, it was observed that the coral-like structure that consisted of Cu-rich and Ni-rich phases grew in the thickness direction. The most desirable microstructure was obtained at a relatively low current density of 0.4 mA/cm2. In other words, the surface was the smoothest and defect-free at this current density. The electroplating rate was slightly enhanced with an increase in current density. Investigations of its solid-state reaction properties, including the formation of Kirkendall voids, were also carried out after reflow soldering with Sn-3.0 Ag-0.5 Cu solder balls. In the solid-state aging experiment at 125°C, Kirkendall voids at the normal Sn-3.0 Ag-0.5 Cu solder/Cu interface were easily formed after just 240 h. Meanwhile, the presence of an intermetallic compound (IMC) layer created in the solder/MPL interface indicated a slightly lower growth rate, and no Kirkendall voids were observed in the IMC layer even after 720 h.

Breastfeeding, comnlementarv food introduction and overweight in preschool children.

PubMed

Lopes, Amanda Forster; Rocha, Elida Mara Braga; da Silva, Janaina Paula Costa; Nascimento, Viviane Gabriela; Bertoli, Ciro; Leone, Claudio

2016-09-01

Growing phenomenon, which involves high morbidity and consequently high costs for health systems, obesity has been found also among the pediatric population and is currently considered a public health problem. The aim of this study was to verify if in children in the early preschool age we can see the prevalence of overweight and if introducing complementary feeding as well as the type of food introduced, are associated with this condition in this age group. It is an observational analytic study with children born in 2011-2012 that attended public schools in Taubat6 -SP during 2014. In addition to the weight and height of children, information about the history of feeding and birth were collectedusing a standardized questionnaire.The nutritional status was defined as having overweight children with z-scores for body mass index (zIMC) > 1.We conducted bivariate analysis and then linear regression analysis of multiple variables.The prevalence of overweight was elevated (27.5%). Only birth weight showed significant correlation with respect to zIMC (r = 0.22, p < 0.0001). The multivariable analysis showed no relationship with the various foods, but showed birth weightas a high risk factor, the male and the total duration of breastfeeding as protective factors. As a result, we conclude that the early introduction of new foods is not a risk factor for the development of overweight at the beginning of pre-school age.

A dosimetric study of cardiac dose sparing using the reverse semi-decubitus technique for left breast and internal mammary chain irradiation.

PubMed

Niglas, Mark; McCann, Claire; Keller, Brian M; Makhani, Nadiya; Presutti, Joseph; Vesprini, Danny; Rakovitch, Eileen; Elzibak, Alyaa; Mashouf, Shahram; Lee, Justin

2016-01-01

Breath-hold techniques can reduce cardiac dose in breast radiotherapy. The reverse semi-decubitus (RSD) technique is an alternative free-breathing method used at our centre. This study compares the dosimetry of free-breathing supine, RSD and moderate deep inspiration breath-hold (mDIBH) techniques. Twelve patients with left-sided breast cancer who were simulated using standard supine, RSD and mDIBH techniques were identified retrospectively. New plans using standard breast tangents and techniques for internal mammary chain (IMC) nodal coverage were assessed. Using standard tangents, mean heart dose, heart V25Gy and mean left anterior descending artery (LAD) dose were found to be significantly lower for RSD and mDIBH when compared to free-breathing supine (p ⩽ 0.03). Using wide-tangents, the maximum LAD point dose was also lower for RSD and mDIBH (p ⩽ 0.02). There were no statistically significant dosimetric differences found between the RSD and mDIBH simulation techniques for standard breast-tangent plans, though organ-at-risk doses were lower for mDIBH in wide-tangent plans. There was no improvement in cardiac dosimetry between RSD and free-breathing supine when using an electron field IMC plan. For patients unable to tolerate breath-hold, the RSD technique is an alternative approach that can reduce cardiac dose. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Soldering Characteristics and Mechanical Properties of Sn-1.0Ag-0.5Cu Solder with Minor Aluminum Addition

PubMed Central

Leong, Yee Mei; Haseeb, A.S.M.A.

2016-01-01

Driven by the trends towards miniaturization in lead free electronic products, researchers are putting immense efforts to improve the properties and reliabilities of Sn based solders. Recently, much interest has been shown on low silver (Ag) content solder SAC105 (Sn-1.0Ag-0.5Cu) because of economic reasons and improvement of impact resistance as compared to SAC305 (Sn-3.0Ag-0.5Cu. The present work investigates the effect of minor aluminum (Al) addition (0.1–0.5 wt.%) to SAC105 on the interfacial structure between solder and copper substrate during reflow. The addition of minor Al promoted formation of small, equiaxed Cu-Al particle, which are identified as Cu3Al2. Cu3Al2 resided at the near surface/edges of the solder and exhibited higher hardness and modulus. Results show that the minor addition of Al does not alter the morphology of the interfacial intermetallic compounds, but they substantially suppress the growth of the interfacial Cu6Sn5 intermetallic compound (IMC) after reflow. During isothermal aging, minor alloying Al has reduced the thickness of interfacial Cu6Sn5 IMC but has no significant effect on the thickness of Cu3Sn. It is suggested that of atoms of Al exert their influence by hindering the flow of reacting species at the interface. PMID:28773645

Soldering Characteristics and Mechanical Properties of Sn-1.0Ag-0.5Cu Solder with Minor Aluminum Addition.

PubMed

Leong, Yee Mei; Haseeb, A S M A

2016-06-28

Driven by the trends towards miniaturization in lead free electronic products, researchers are putting immense efforts to improve the properties and reliabilities of Sn based solders. Recently, much interest has been shown on low silver (Ag) content solder SAC105 (Sn-1.0Ag-0.5Cu) because of economic reasons and improvement of impact resistance as compared to SAC305 (Sn-3.0Ag-0.5Cu. The present work investigates the effect of minor aluminum (Al) addition (0.1-0.5 wt.%) to SAC105 on the interfacial structure between solder and copper substrate during reflow. The addition of minor Al promoted formation of small, equiaxed Cu-Al particle, which are identified as Cu₃Al₂. Cu₃Al₂ resided at the near surface/edges of the solder and exhibited higher hardness and modulus. Results show that the minor addition of Al does not alter the morphology of the interfacial intermetallic compounds, but they substantially suppress the growth of the interfacial Cu₆Sn₅ intermetallic compound (IMC) after reflow. During isothermal aging, minor alloying Al has reduced the thickness of interfacial Cu₆Sn₅ IMC but has no significant effect on the thickness of Cu₃Sn. It is suggested that of atoms of Al exert their influence by hindering the flow of reacting species at the interface.

Thermodynamic properties of gadolinium in Ga-Sn and Ga-Zn eutectic based alloys

NASA Astrophysics Data System (ADS)

Maltsev, Dmitry S.; Volkovich, Vladimir A.; Yamshchikov, Leonid F.; Chukin, Andrey V.

2016-09-01

Thermodynamic properties of gadolinium in Ga-Sn and Ga-Zn eutectic based alloys were studied. Temperature dependences of gadolinium activity in the studied alloys were determined at 573-1073 K employing the EMF method. Solubility of gadolinium in the Ga-Sn and Ga-Zn alloys was measured at 462-1073 K using IMCs sedimentation method. Activity coefficients as well as partial and excess thermodynamic functions of gadolinium in the studied alloys were calculated on the basis of the obtained experimental data.

Proceedings of the Annual Electronics Manufacturing Seminar (12th) Held in China Lake, California on 17-19 February 1988

DTIC Science & Technology

1988-02-01

8217age resistant’ solder lead finish for comparison purposes. * Solder coating thickness ranged from 5 through 10 microns, and solder composition was...approximate composition NiSn3, which does not correspond to any of the stable Ni-Sn IMC’s on the 60- equilibrium phase diagram. A long-term low-temperature...phase, and so is the composition . Differential scanning calorimetry measurements determined that NiSn 3 indeed is a metastable phase which rapidly

JPRS Report China

DTIC Science & Technology

1988-03-29

131079 JPRS-CAR-88-016 29 MARCH 1988 !■■■■■ ■«■■■I FOREIGN BROADCAST INFORMATION SERVICE -/P/? S Report— China \\0$^ P L «2 ptSTKBimÖN...SPRINGFIELD, VA 22161 imc*»u"I1𔄂PECB5D6 -f/ S JPRS-CAR-88-016 CONTENTS 29 MARCH 1988 POLITICAL CYL First Secretary Discusses CYL Structural...building socialism with distinctive Chinese characteristics into a new generation of people who have ideals, morality, cultural knowledge , and a good

Register of Planned Emergency Producers.

DTIC Science & Technology

1991-04-01

879 1 HELVOET PHARMA INC. PENNSAUKEN NJ 461096 $80 1 FASLOK MILLS INC MURRAT HILL NJ 439625 619 1 HERCULES INC 3 FASRITE LAMINATING CORP WOOD RIDGE...317252 628 HARRIS CORPORATION 1 GENERAL ELECTRIC COMPANY 3 PRO ELECTRONICS DIV WESTBURY NT A 799145 678 CHEMICA . & MEDICAL DIV HASSALL JOHN INC...ELECTRONim CS Ca, IMC V SAYVILLE Ut A 56730 1 sit PARAMaOUNT nACacmnil cO INC DER PARK my 113336 ITS L&UNAMM MFG CORP ROliKONKOMA MY A 58047S I PTO# INC1

Failures in Hybrid Microcircuits During Environmental Testing. History Cases

NASA Technical Reports Server (NTRS)

Teverovsky, Alexander

2008-01-01

This purpose of this viewgraph presentation is to discuss failures in hermetic hybrids observed at the GSFC PA Lab during environmental stress testing. The cases discussed are: Case I. Substrate metallization failures during Thermal cycling (TC). Case II. Flex lid-induced failure. Case Ill. Hermeticity failures during TC. Case IV. Die metallization cracking during TC. and how many test cycles and parts is necessary? Case V. Wire Bond failures after life test. Case VI. Failures caused by Au/In IMC growth.

BROMOC suite: Monte Carlo/Brownian dynamics suite for studies of ion permeation and DNA transport in biological and artificial pores with effective potentials.

PubMed

De Biase, Pablo M; Markosyan, Suren; Noskov, Sergei

2015-02-05

The transport of ions and solutes by biological pores is central for cellular processes and has a variety of applications in modern biotechnology. The time scale involved in the polymer transport across a nanopore is beyond the accessibility of conventional MD simulations. Moreover, experimental studies lack sufficient resolution to provide details on the molecular underpinning of the transport mechanisms. BROMOC, the code presented herein, performs Brownian dynamics simulations, both serial and parallel, up to several milliseconds long. BROMOC can be used to model large biological systems. IMC-MACRO software allows for the development of effective potentials for solute-ion interactions based on radial distribution function from all-atom MD. BROMOC Suite also provides a versatile set of tools to do a wide variety of preprocessing and postsimulation analysis. We illustrate a potential application with ion and ssDNA transport in MspA nanopore. © 2014 Wiley Periodicals, Inc.

Phase Equilibria of the Ternary Sn-Pb-Co System at 250°C and Interfacial Reactions of Co with Sn-Pb Alloys

NASA Astrophysics Data System (ADS)

Wang, Chao-hong; Kuo, Chun-yi; Yang, Nian-cih

2015-11-01

The isothermal section of the ternary Sn-Pb-Co system at 250°C was experimentally determined through a series of the equilibrated Sn-Pb-Co alloys of various compositions. The equilibrium phases were identified on the basis of compositional analysis. For the Sn-Co intermetallic compounds (IMCs), CoSn3, CoSn2, CoSn and Co3Sn2, the Pb solubility was very limited. There exist five tie-triangle regions. The Co-Pb system involves one monotectic reaction, so the phase separation of liquid alloys near the Co-Pb side occurred prior to solidification. The immiscibility field was also determined. Additionally, interfacial reactions between Co and Sn-Pb alloys were conducted. The reaction phase for the Sn-48 at.%Pb and Sn-58 at.%Pb at 250°C was CoSn3 and CoSn2, respectively. Both of them were simultaneously formed in the Sn-53 at.%Pb/Co. The formed IMCs were closely associated to the phase equilibria relationship of the liquid-CoSn3-CoSn2 tie-triangle. Furthermore, with increasing temperatures, the phase formed in equilibrium with Sn-37 wt.%Pb was found to transit from CoSn3 to CoSn2 at 275°C. We propose a simple method of examining the phase transition temperature in the interfacial reactions to determine the boundaries of the liquid-CoSn3-CoSn2 tie-triangles at different temperatures.

Tracking Glideosome-associated protein 50 reveals the development and organization of the inner membrane complex of Plasmodium falciparum.

PubMed

Yeoman, Jeffrey A; Hanssen, Eric; Maier, Alexander G; Klonis, Nectarios; Maco, Bohumil; Baum, Jake; Turnbull, Lynne; Whitchurch, Cynthia B; Dixon, Matthew W A; Tilley, Leann

2011-04-01

The most deadly of the human malaria parasites, Plasmodium falciparum, has different stages specialized for invasion of hepatocytes, erythrocytes, and the mosquito gut wall. In each case, host cell invasion is powered by an actin-myosin motor complex that is linked to an inner membrane complex (IMC) via a membrane anchor called the glideosome-associated protein 50 (PfGAP50). We generated P. falciparum transfectants expressing green fluorescent protein (GFP) chimeras of PfGAP50 (PfGAP50-GFP). Using immunoprecipitation and fluorescence photobleaching, we show that C-terminally tagged PfGAP50-GFP can form a complex with endogenous copies of the linker protein PfGAP45 and the myosin A tail domain-interacting protein (MTIP). Full-length PfGAP50-GFP is located in the endoplasmic reticulum in early-stage parasites and then redistributes to apical caps during the formation of daughter merozoites. In the final stage of schizogony, the PfGAP50-GFP profile extends further around the merozoite surface. Three-dimensional (3D) structured illumination microscopy reveals the early-stage IMC as a doubly punctured flat ellipsoid that separates to form claw-shaped apposed structures. A GFP fusion of PfGAP50 lacking the C-terminal membrane anchor is misdirected to the parasitophorous vacuole. Replacement of the acid phosphatase homology domain of PfGAP50 with GFP appears to allow correct trafficking of the chimera but confers a growth disadvantage.

Differential protective effects of immune lymphoid cells against transplanted line Ib leukemia and immune polioencephalomyelitis. [X radiation, mice

DOE Office of Scientific and Technical Information (OSTI.GOV)

Duffey, P.S.; Lukasewycz, O.A.; Olson, D.S.

1978-12-01

The capacity of immune cells obtained from the major lymphoid compartments to protect C58 mice from transplanted line Ib leukemia, and from an age-dependent autoimmune CNS disease (immune polioencephalomyelitis = IPE) elicited by immunizing old C58 mice with inactivated Ib cells was quantified. Cells used for comparative adoptive protection tests were harvested from the major lymphoid compartments 14 to 15 days after young C58 mice were immunized with inactivated Ib cell preparations. Regression curves were plotted from survival data and the log/sub 10/PD/sub 50/ values were determined. Immune spleen (ISC) and peritoneal cells (IPEC) were significantly more protective against transplantedmore » Ib cells than immune lymph node (ILNC), thymic (ITC), and marrow cells (IMC). In contrast, IPEC and IMC were not protective against IPE and ITC were only marginally protective. ILNC afforded significant protection to transplantable leukemia but were only marginally protective to IPE. When ISC were treated with anti-thy 1.2 serum and complement, protection against transplanted leukemia and IPE was reduced > 99%. When donors of immune lymphoid cells were treated with 12.5 mg of cortisone acetate daily for 2 days before lymphoid cells were harvested, protection against transplanted Ib cells by ISC was reduced by approximately 90% whereas protection against IPE was totally eliminated. Considered together, these results indicate that the protective mechanisms to transplantable leukemia and IPE differ significantly in the same indicator mouse strain.« less

Effect of Cu concentration on morphology of Sn-Ag-Cu solders by mechanical alloying

NASA Astrophysics Data System (ADS)

Kao, Szu-Tsung; Duh, Jenq-Gong

2004-12-01

The mechanical alloying (MA) process is considered an alternative approach to produce solder materials. In this study, the effect of Cu concentration in the ternary Sn-3.5Ag-xCu (x=0.2, 0.7, and 1) solder by MA was investigated. The (Cu,Sn) solid solution was precipitated as the Cu6Sn5 intermetallic compound (IMC), which was distributed nonuniformly through the microstructure. The Cu6Sn5 IMC, which was present in the SnAgCu solder with high Cu composition, causes the as-milled MA particle to fracture to a smaller size. Appreciable distinction on morphology of as-milled MA powders with different Cu content was revealed. When the Cu concentration was low (x=0.2), MA particle aggregated to a spherical ingot with large particle size. For higher Cu concentration (x=0.7 and x=1), the MA particle turned to flakes with smaller particle size. The distinction of the milling mechanism of Sn-3.5Ag-xCu (x=0.2, 0.7, and 1) solder by the MA process was discussed. An effective approach was developed to reduce the particle size of the SnAgCu solder from 1 mm down to 10-100 µm by doping the Cu6Sn5 nanoparticle during the MA process. In addition, the differential scanning calorimetry (DSC) results also ensure the compatibility to apply the solder material for the reflow process.

LINEA ALBA COLLAGEN ASSESSMENT IN MORBIDLY OBESE PATIENTS.

PubMed

Grossi, João Vicente Machado; Nicola, Felipe Fernandes; Zepeda, Ivan Alberto; Becker, Martina; Trindade, Eduardo Neubarth; Diemen, Vinicius Von; Cavazzola, Leandro Totti; Trindade, Manoel Roberto Maciel

The evaluation of collagen in the abdominal wall has been increasingly studied because of the relevance on collagen in the healing process after laparotomy. To evaluate the amount of collagen in the linea alba of patients undergoing laparotomic bariatric surgery and comparing with non-obese cadavers. Were evaluated 88 samples of aponeurosis from abdominal linea alba of 44 obese patients (obesity group) and 44 non-obese cadavers (control group). The samples were collected in 2013 and 2104, and were sorted according to age (18-30, 31-45 and 46-60), gender, BMI, waist and cervical circumference, and subcutaneous tissue thickness. Material for biopsy was collected from the supraumbilical region of the linea alba for immunohistochemical analysis differentiating collagen type 1 and type 3 and the 1/3 ratio. Image-Pro Plus pixel counting software was used to measure the amount of collagen. The obesity group evidenced mean age 44.11±9.90 years; 18-30 age group had three (6.8%) obese individuals; 31-45 had 22 (50%) and 46-60 had 19 (43.1%). Females were present in 81.8% (n=36); BMI (kg/m²) was 48.81±6.5; waist circumference (cm) was 136.761±13.55; subcutaneous tissue thickness (cm) 4.873±0.916. Considering age groups, gender and BMI, there were statistical differences in all tests when compared with the cadavers. The amount of collagen in the linea alba above the umbilical region in the morbidly obese patients was smaller than in the non-obese cadavers in the same age group. A avaliação do colágeno na parede abdominal é cada vez mais estudada, em virtude da relevância dele no processo cicatricial após laparotomia. Avaliar a quantidade de colágeno na linha alba de pacientes submetidos à cirurgia bariátrica e compará-la com a de cadáveres não-obesos. Foram avaliados dois grupos com total de 88 amostras da aponeurose da linha alba abdominal, divididas em 44 de pacientes obesos (grupo obesidade) com indicação de cirurgia bariátrica e 44 de cadáveres não-obesos (grupo controle). As amostras foram retiradas da linha alba abdominal no período de 2013 a 2014 e inicialmente foram separadas conforme faixas etárias (18-30, 31-45 e 46-60), gênero, medidas de IMC, circunferência abdominal e cervical e espessura do subcutâneo do indivíduo. Foi coletado material para biópsia da linha alba supraumbilical para análise imunoistoquímica, diferenciando o colágeno tipo I e III e sua relação de tipo I/III. Utilizou-se o programa de contagem de pixels Image-Pro Plus(r), que mensurou a quantidade do colágeno. O grupo obesidade teve idade 44,11±9,90 anos, Na faixa etária de 18-30 anos foram incluídos três (6,8%) obesos; na de 31-45 anos 22 (50%) e na de 46-60 anos 19 (43,1%). O gênero feminino apresentou predomínio, com 36 (81,8%) pacientes. O IMC (kg/m²) foi de 48,81±6,5; a circunferência abdominal (cm) foi de 136,761±13,55; a espessura do subcutâneo (cm) foi de 4,873±0,916. A quantidade de colágeno tipo I foi de 134.683,3±206.657,4; a de colágeno tipo III foi de 413.137,2±283.656,1; a razão do colágeno tipo I/III foi 0,419±0,636. Considerando-se faixas de idade, gênero e IMC, foram constatadas diferenças estatísticas em todas as análises quando comparadas com às dos cadáveres. Os obesos mórbidos apresentaram quantidade de colágeno na linha alba supraumbilical menor que a do grupo controle de cadáveres não-obesos na mesma faixa etária.

Surgery for prosthetic valve endocarditis: associations between morbidity, mortality and costs†

PubMed Central

Grubitzsch, Herko; Christ, Torsten; Melzer, Christoph; Kastrup, Marc; Treskatsch, Sascha; Konertz, Wolfgang

2016-01-01

OBJECTIVES Surgery for prosthetic valve endocarditis (PVE) is associated with significant morbidity and mortality as well as with increased resource utilization and costs. For risk and cost reduction, an understanding of contributing factors and interrelations is essential. METHODS Out of 1080 heart valve procedures performed between January 2010 and December 2012, 41 patients underwent surgery for PVE. Complete economic data were available for 30 of them (study cohort). The patients' mean age was 64 ± 12 years (range 37–79 years), and 73% were men. The clinical course was reviewed and morbidity, mortality and costs as well as associations between them were analysed. The cost matrix for each individual patient was obtained from the Institute for the Hospital Remuneration System (InEK GmbH, Germany). The median follow-up was 2.6 years [interquartile range (IQR) 3.7 years; 100% complete]. RESULTS Preoperative status was critical (EuroSCORE II >20%) in 43% of patients. Staphylococci were the most common infecting micro-organisms (27%). The operative mortality rate (≤30 days) was 17%. At 1 year, the overall survival rate was 71 ± 9%. At least one disease- or surgery-related complication affected 21 patients (early morbidity 70%), >1 complication affected 12 patients (40%). There was neither a recurrence of endocarditis, nor was a reoperation required. The mean total hospital costs were 42.6 ± 37.4 Thousand Euro (T€), median 25.7 T€, IQR 28.4 T€ and >100 T€ in 10% of cases. Intensive care unit/intermediate care (ICU/IMC) and operation accounted for 40.4 ± 18.6 and 25.7 ± 12.1% of costs, respectively. There was a significant correlation (Pearson's sample correlation coefficient) between total costs and duration of hospital stay (r = 0.83, P < 0.001) and between ICU/IMC costs and duration of ICU/IMC stay (r = 0.97, P < 0.001). The median daily hospital costs were 1.8 T€/day, but >2.4 T€/day in 25% of patients (upper quartile). The following pattern of associations was identified (P < 0.05). Early mortality was related to preoperative morbidity and postoperative renal failure. Early morbidity was associated with preoperative morbidity and urgency. Total costs were mainly explained by preoperative morbidity, postoperative morbidity and urgency. High EuroSCORE II, complex surgery, need for mechanical circulatory support as well as postoperative mortality and morbidity increased daily costs. CONCLUSIONS The timely diagnosis and treatment of these patients must be a priority, as preoperative morbidity is the major contributor towards mortality, morbidity and costs after surgery for PVE. PMID:26965513

An asymptotic preserving unified gas kinetic scheme for frequency-dependent radiative transfer equations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun, Wenjun, E-mail: sun_wenjun@iapcm.ac.cn; Jiang, Song, E-mail: jiang@iapcm.ac.cn; Xu, Kun, E-mail: makxu@ust.hk

This paper presents an extension of previous work (Sun et al., 2015 [22]) of the unified gas kinetic scheme (UGKS) for the gray radiative transfer equations to the frequency-dependent (multi-group) radiative transfer system. Different from the gray radiative transfer equations, where the optical opacity is only a function of local material temperature, the simulation of frequency-dependent radiative transfer is associated with additional difficulties from the frequency-dependent opacity. For the multiple frequency radiation, the opacity depends on both the spatial location and the frequency. For example, the opacity is typically a decreasing function of frequency. At the same spatial region themore » transport physics can be optically thick for the low frequency photons, and optically thin for high frequency ones. Therefore, the optical thickness is not a simple function of space location. In this paper, the UGKS for frequency-dependent radiative system is developed. The UGKS is a finite volume method and the transport physics is modeled according to the ratio of the cell size to the photon's frequency-dependent mean free path. When the cell size is much larger than the photon's mean free path, a diffusion solution for such a frequency radiation will be obtained. On the other hand, when the cell size is much smaller than the photon's mean free path, a free transport mechanism will be recovered. In the regime between the above two limits, with the variation of the ratio between the local cell size and photon's mean free path, the UGKS provides a smooth transition in the physical and frequency space to capture the corresponding transport physics accurately. The seemingly straightforward extension of the UGKS from the gray to multiple frequency radiation system is due to its intrinsic consistent multiple scale transport modeling, but it still involves lots of work to properly discretize the multiple groups in order to design an asymptotic preserving (AP) scheme in all regimes. The current scheme is tested in a few frequency-dependent radiation problems, and the results are compared with the solutions from the well-defined implicit Monte Carlo (IMC) method. The UGKS is much more efficient than IMC, and the computational times of both schemes for all test cases are listed. The UGKS seems to be the first discrete ordinate method (DOM) for the accurate capturing of multiple frequency radiative transport physics from ballistic particle motion to the diffusive wave propagation.« less

Electrochemical Behavior of Sn-9Zn-xTi Lead-Free Solders in Neutral 0.5M NaCl Solution

NASA Astrophysics Data System (ADS)

Wang, Zhenghong; Chen, Chuantong; Jiu, Jinting; Nagao, Shijo; Nogi, Masaya; Koga, Hirotaka; Zhang, Hao; Zhang, Gong; Suganuma, Katsuaki

2018-03-01

Electrochemical techniques were employed to study the electrochemical corrosion behavior of Sn-9Zn-xTi (x = 0, 0.05, 0.1, 0.2 wt.%) lead-free solders in neutral 0.5M NaCl solution, aiming to figure out the effect of Ti content on the corrosion properties of Sn-9Zn, providing information for the composition design of Sn-Zn-based lead-free solders from the perspective of corrosion. EIS results reveal that Ti addition was involved in the corrosion product layer and changed electrochemical interface behavior from charge transfer control process to diffusion control process. The trace amount of Ti addition (0.05 wt.%) can refine the microstructure and improve the corrosion resistance of Sn-9Zn solder, evidenced by much lower corrosion current density (i corr) and much higher total resistance (R t). Excess Ti addition (over 0.1 wt.%) led to the formation of Ti-containing IMCs, which were confirmed as Sn3Ti2 and Sn5Ti6, deteriorating the corrosion resistance of Sn-9Zn-xTi solders. The main corrosion products were confirmed as Sn3O(OH)2Cl2 mixed with small amount of chlorine/oxide Sn compounds.

Symbology Development for General Aviation Synthetic Vision Primary Flight Displays for the Approach and Missed-Approach Modes of Flight

NASA Technical Reports Server (NTRS)

Bartolone, Anthony P.; Hughes, Monica F.; Wong, Douglas T.; Takallu, Mohammad A.

2004-01-01

Spatial disorientation induced by inadvertent flight into instrument meteorological conditions (IMC) continues to be a leading cause of fatal accidents in general aviation. The Synthetic Vision Systems General Aviation (SVS-GA) research element, an integral part of NASA s Aviation Safety and Security Program (AvSSP), is investigating a revolutionary display technology designed to mitigate low visibility events such as controlled flight into terrain (CFIT) and low-visibility loss of control (LVLoC). The integrated SVS Primary Flight Display (SVS-PFD) utilizes computer generated 3-dimensional imagery of the surrounding terrain augmented with flight path guidance symbology. This unique combination will provide GA pilots with an accurate representation of their environment and projection of their flight path, regardless of time of day or out-the-window (OTW) visibility. The initial Symbology Development for Head-Down Displays (SD-HDD) simulation experiment examined 16 display configurations on a centrally located high-resolution PFD installed in NASA s General Aviation Work Station (GAWS) flight simulator. The results of the experiment indicate that situation awareness (SA) can be enhanced without having a negative impact on flight technical error (FTE), by providing a general aviation pilot with an integrated SVS display to use when OTW visibility is obscured.

Flight Simulator Evaluation of Synthetic Vision Display Concepts to Prevent Controlled Flight Into Terrain (CFIT)

NASA Technical Reports Server (NTRS)

Arthur, Jarvis J., III; Prinzel, Lawrence J., III; Kramer, Lynda J.; Parrish, Russell V.; Bailey, Randall E.

2004-01-01

In commercial aviation, over 30-percent of all fatal accidents worldwide are categorized as Controlled Flight Into Terrain (CFIT) accidents, where a fully functioning airplane is inadvertently flown into the ground. The major hypothesis for a simulation experiment conducted at NASA Langley Research Center was that a Primary Flight Display (PFD) with synthetic terrain will improve pilots ability to detect and avoid potential CFITs compared to conventional instrumentation. All display conditions, including the baseline, contained a Terrain Awareness and Warning System (TAWS) and Vertical Situation Display (VSD) enhanced Navigation Display (ND). Each pilot flew twenty-two approach departure maneuvers in Instrument Meteorological Conditions (IMC) to the terrain challenged Eagle County Regional Airport (EGE) in Colorado. For the final run, flight guidance cues were altered such that the departure path went into terrain. All pilots with a synthetic vision system (SVS) PFD (twelve of sixteen pilots) noticed and avoided the potential CFIT situation. The four pilots who flew the anomaly with the conventional baseline PFD configuration (which included a TAWS and VSD enhanced ND) had a CFIT event. Additionally, all the SVS display concepts enhanced the pilot s situational awareness, decreased workload and improved flight technical error (FTE) compared to the baseline configuration.

Long-term effectiveness and safety of stereotactic gamma knife surgery as a primary sole treatment in the management of glomus jagulare tumor.

PubMed

Hafez, Raef F A; Morgan, Magad S; Fahmy, Osama M; Hassan, Hamdy T

2018-05-01

This study aims to report and confirm long-term effectiveness and safety of stereotactic Gamma Knife Surgery as a primary sole treatment in the management of 40 glomus jagulare tumors patients. Retrospective analysis of clinical and radiological outcomes of 40 GJTs consecutive patients treated with GKS as primary sole treatment at International Medical Center (IMC), Cairo-Egypt from the beginning of 2005 till the end of 2014,with mean follow-up period of 84 months (range 36-156 months), mean tumor volume was 6.5 cc, and mean peripheral radiation dose of 15 Gy, to mean isodose curve of 38%. The most common neurological deficit at initial evaluation was bulbar symptoms in 24 patients, followed by pulsatile tinnitus in 22, deterioration of hearing in 20 patients. The overall clinical control achieved in 92.5% of patients, while actuarial tumor size control rate post- GKS was 97.5% at 3 years, 97% at 5 years and 92% at 10 years of follow-up period. Gamma knife surgery could be used effectively and safely as a primary sole treatment tool in the management of glomus jugulare tumors. Copyright © 2018 Elsevier B.V. All rights reserved.

Electrochemical Behavior of Sn-9Zn- xTi Lead-Free Solders in Neutral 0.5M NaCl Solution

NASA Astrophysics Data System (ADS)

Wang, Zhenghong; Chen, Chuantong; Jiu, Jinting; Nagao, Shijo; Nogi, Masaya; Koga, Hirotaka; Zhang, Hao; Zhang, Gong; Suganuma, Katsuaki

2018-05-01

Electrochemical techniques were employed to study the electrochemical corrosion behavior of Sn-9Zn- xTi ( x = 0, 0.05, 0.1, 0.2 wt.%) lead-free solders in neutral 0.5M NaCl solution, aiming to figure out the effect of Ti content on the corrosion properties of Sn-9Zn, providing information for the composition design of Sn-Zn-based lead-free solders from the perspective of corrosion. EIS results reveal that Ti addition was involved in the corrosion product layer and changed electrochemical interface behavior from charge transfer control process to diffusion control process. The trace amount of Ti addition (0.05 wt.%) can refine the microstructure and improve the corrosion resistance of Sn-9Zn solder, evidenced by much lower corrosion current density ( i corr) and much higher total resistance ( R t). Excess Ti addition (over 0.1 wt.%) led to the formation of Ti-containing IMCs, which were confirmed as Sn3Ti2 and Sn5Ti6, deteriorating the corrosion resistance of Sn-9Zn- xTi solders. The main corrosion products were confirmed as Sn3O(OH)2Cl2 mixed with small amount of chlorine/oxide Sn compounds.