Improved scaling laws for stage inert mass space Propulsion systems. Volume 3: Propulsion synthesis program users and programmers manual

NASA Technical Reports Server (NTRS)

1971-01-01

The analytical models developed for the Space Propulsion Automated Synthesis Modeling (SPASM) program are presented. Weight scaling laws developed during this study are incorporated into the program's scaling data bank. A detail listing, logic diagram and input/output formats are supplied for the SPASM program. Two test examples for one to four-stage vehicles performing different types of missions are shown to demonstrate the program's capability and versatility.

Decision Modeling Framework to Minimize Arrival Delays from Ground Delay Programs

NASA Astrophysics Data System (ADS)

Mohleji, Nandita

Convective weather and other constraints create uncertainty in air transportation, leading to costly delays. A Ground Delay Program (GDP) is a strategy to mitigate these effects. Systematic decision support can increase GDP efficacy, reduce delays, and minimize direct operating costs. In this study, a decision analysis (DA) model is constructed by combining a decision tree and Bayesian belief network. Through a study of three New York region airports, the DA model demonstrates that larger GDP scopes that include more flights in the program, along with longer lead times that provide stakeholders greater notice of a pending program, trigger the fewest average arrival delays. These findings are demonstrated to result in a savings of up to $1,850 per flight. Furthermore, when convective weather is predicted, forecast weather confidences remain the same level or greater at least 70% of the time, supporting more strategic decision making. The DA model thus enables quantification of uncertainties and insights on causal relationships, providing support for future GDP decisions.

Automated Performance Prediction of Message-Passing Parallel Programs

NASA Technical Reports Server (NTRS)

Block, Robert J.; Sarukkai, Sekhar; Mehra, Pankaj; Woodrow, Thomas S. (Technical Monitor)

1995-01-01

The increasing use of massively parallel supercomputers to solve large-scale scientific problems has generated a need for tools that can predict scalability trends of applications written for these machines. Much work has been done to create simple models that represent important characteristics of parallel programs, such as latency, network contention, and communication volume. But many of these methods still require substantial manual effort to represent an application in the model's format. The NIK toolkit described in this paper is the result of an on-going effort to automate the formation of analytic expressions of program execution time, with a minimum of programmer assistance. In this paper we demonstrate the feasibility of our approach, by extending previous work to detect and model communication patterns automatically, with and without overlapped computations. The predictions derived from these models agree, within reasonable limits, with execution times of programs measured on the Intel iPSC/860 and Paragon. Further, we demonstrate the use of MK in selecting optimal computational grain size and studying various scalability metrics.

Aligning Perceptions of Laboratory Demonstrators' Responsibilities to Inform the Design of a Laboratory Teacher Development Program

ERIC Educational Resources Information Center

Flaherty, Aishling; O'Dwyer, Anne; Mannix-McNamara, Patricia; Leahy, J. J.

2017-01-01

Throughout countries such as Ireland, the U.K., and Australia, graduate students who fulfill teaching roles in the undergraduate laboratory are often referred to as "laboratory demonstrators". The laboratory demonstrator (LD) model of graduate teaching is similar to the more commonly known graduate teaching assistant (GTA) model that is…

Classical Demonstration of Polarization.

ERIC Educational Resources Information Center

Bauman, Robert P.; Moore, Dennis R.

1980-01-01

Presents a classical demonstration of polarization for high school students. The initial state of this model, which demonstrates the important concepts of the optical and quantum problems, was developed during the 1973 summer program on lecture demonstration at the U.S. Naval Academy. (HM)

Evaluation of Vocational Technical Education. Phase II. A Skeletal Model with Suggested Research and Development Activities.

ERIC Educational Resources Information Center

New Educational Directions, Crawfordsville, IN.

Phase 2 of this project presents a skeletal model for evaluating vocational education programs which can be applied to secondary, post-secondary, and adult education programs. The model addresses 13 main components of the vocational education system: descriptive information, demonstration of need, student recruitment and selection, curriculum,…

A multistage stochastic programming model for a multi-period strategic expansion of biofuel supply chain under evolving uncertainties

DOE Office of Scientific and Technical Information (OSTI.GOV)

Xie, Fei; Huang, Yongxi

Here, we develop a multistage, stochastic mixed-integer model to support biofuel supply chain expansion under evolving uncertainties. By utilizing the block-separable recourse property, we reformulate the multistage program in an equivalent two-stage program and solve it using an enhanced nested decomposition method with maximal non-dominated cuts. We conduct extensive numerical experiments and demonstrate the application of the model and algorithm in a case study based on the South Carolina settings. The value of multistage stochastic programming method is also explored by comparing the model solution with the counterparts of an expected value based deterministic model and a two-stage stochastic model.

A multistage stochastic programming model for a multi-period strategic expansion of biofuel supply chain under evolving uncertainties

DOE PAGES

Xie, Fei; Huang, Yongxi

2018-02-04

Here, we develop a multistage, stochastic mixed-integer model to support biofuel supply chain expansion under evolving uncertainties. By utilizing the block-separable recourse property, we reformulate the multistage program in an equivalent two-stage program and solve it using an enhanced nested decomposition method with maximal non-dominated cuts. We conduct extensive numerical experiments and demonstrate the application of the model and algorithm in a case study based on the South Carolina settings. The value of multistage stochastic programming method is also explored by comparing the model solution with the counterparts of an expected value based deterministic model and a two-stage stochastic model.

EnviroLand: A Simple Computer Program for Quantitative Stream Assessment.

ERIC Educational Resources Information Center

Dunnivant, Frank; Danowski, Dan; Timmens-Haroldson, Alice; Newman, Meredith

2002-01-01

Introduces the Enviroland computer program which features lab simulations of theoretical calculations for quantitative analysis and environmental chemistry, and fate and transport models. Uses the program to demonstrate the nature of linear and nonlinear equations. (Author/YDS)

A computer program for predicting nonlinear uniaxial material responses using viscoplastic models

NASA Technical Reports Server (NTRS)

Chang, T. Y.; Thompson, R. L.

1984-01-01

A computer program was developed for predicting nonlinear uniaxial material responses using viscoplastic constitutive models. Four specific models, i.e., those due to Miller, Walker, Krieg-Swearengen-Rhode, and Robinson, are included. Any other unified model is easily implemented into the program in the form of subroutines. Analysis features include stress-strain cycling, creep response, stress relaxation, thermomechanical fatigue loop, or any combination of these responses. An outline is given on the theoretical background of uniaxial constitutive models, analysis procedure, and numerical integration methods for solving the nonlinear constitutive equations. In addition, a discussion on the computer program implementation is also given. Finally, seven numerical examples are included to demonstrate the versatility of the computer program developed.

Using Runtime Analysis to Guide Model Checking of Java Programs

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Norvig, Peter (Technical Monitor)

2001-01-01

This paper describes how two runtime analysis algorithms, an existing data race detection algorithm and a new deadlock detection algorithm, have been implemented to analyze Java programs. Runtime analysis is based on the idea of executing the program once. and observing the generated run to extract various kinds of information. This information can then be used to predict whether other different runs may violate some properties of interest, in addition of course to demonstrate whether the generated run itself violates such properties. These runtime analyses can be performed stand-alone to generate a set of warnings. It is furthermore demonstrated how these warnings can be used to guide a model checker, thereby reducing the search space. The described techniques have been implemented in the b e grown Java model checker called PathFinder.

Program Model Checking: A Practitioner's Guide

NASA Technical Reports Server (NTRS)

Pressburger, Thomas T.; Mansouri-Samani, Masoud; Mehlitz, Peter C.; Pasareanu, Corina S.; Markosian, Lawrence Z.; Penix, John J.; Brat, Guillaume P.; Visser, Willem C.

2008-01-01

Program model checking is a verification technology that uses state-space exploration to evaluate large numbers of potential program executions. Program model checking provides improved coverage over testing by systematically evaluating all possible test inputs and all possible interleavings of threads in a multithreaded system. Model-checking algorithms use several classes of optimizations to reduce the time and memory requirements for analysis, as well as heuristics for meaningful analysis of partial areas of the state space Our goal in this guidebook is to assemble, distill, and demonstrate emerging best practices for applying program model checking. We offer it as a starting point and introduction for those who want to apply model checking to software verification and validation. The guidebook will not discuss any specific tool in great detail, but we provide references for specific tools.

The Effect of Educational Software, Video Modelling and Group Discussion on Social-Skill Acquisition Among Students with Mild Intellectual Disabilities.

PubMed

Hetzroni, Orit E; Banin, Irit

2017-07-01

People with intellectual and developmental disabilities (IDD) often demonstrate difficulties in social skills. The purpose of this study was to examine the effects of a comprehensive intervention program on the acquisition of social skills among students with mild IDD. Single subject multiple baseline design across situations was used for teaching five school-age children with mild IDD social skills embedded in school-based situations. Results demonstrate that the intervention program that included video modelling and games embedded with group discussions and simulations increased the level and use of adequate social behaviours within the school's natural environment. Results demonstrate the unique attribution of a comprehensive interactive program for acquisition and transfer of participants' social skills such as language pragmatics and social rules within the school environment. Group discussions and simulations were beneficial and enabled both group and personalized instruction through the unique application of the program designed for the study. © 2016 John Wiley & Sons Ltd.

Practical Application of Model-based Programming and State-based Architecture to Space Missions

NASA Technical Reports Server (NTRS)

Horvath, Gregory; Ingham, Michel; Chung, Seung; Martin, Oliver; Williams, Brian

2006-01-01

A viewgraph presentation to develop models from systems engineers that accomplish mission objectives and manage the health of the system is shown. The topics include: 1) Overview; 2) Motivation; 3) Objective/Vision; 4) Approach; 5) Background: The Mission Data System; 6) Background: State-based Control Architecture System; 7) Background: State Analysis; 8) Overview of State Analysis; 9) Background: MDS Software Frameworks; 10) Background: Model-based Programming; 10) Background: Titan Model-based Executive; 11) Model-based Execution Architecture; 12) Compatibility Analysis of MDS and Titan Architectures; 13) Integrating Model-based Programming and Execution into the Architecture; 14) State Analysis and Modeling; 15) IMU Subsystem State Effects Diagram; 16) Titan Subsystem Model: IMU Health; 17) Integrating Model-based Programming and Execution into the Software IMU; 18) Testing Program; 19) Computationally Tractable State Estimation & Fault Diagnosis; 20) Diagnostic Algorithm Performance; 21) Integration and Test Issues; 22) Demonstrated Benefits; and 23) Next Steps

Low Boom Flight Demonstrator Briefing

NASA Image and Video Library

2018-04-03

Panelists Peter Iosifidis, program manager, Low-Boom Flight Demonstrator, Lockheed Martin Skunk Works, left, Peter Coen, project manager, Commercial Supersonics Technology Project, Langley Research Center, NASA, center, and Dr. Ed Waggoner, program director, Integrated Aviation Systems Program, NASA, right, are seen behind a model of the Low Boom Flight Demonstrator at a briefing, Tuesday, April 3, 2018 at NASA Headquarters in Washington. This new experimental aircraft will cut cross country travel times in half by flying faster than the speed of sound without creating a sonic boom, enabling travel from New York to Los Angeles in two hours. Photo Credit: (NASA/Aubrey Gemignani)

Constitutive modeling for isotropic materials

NASA Technical Reports Server (NTRS)

Chan, K. S.; Lindholm, U. S.; Bodner, S. R.

1988-01-01

The third and fourth years of a 4-year research program, part of the NASA HOST Program, are described. The program goals were: (1) to develop and validate unified constitutive models for isotropic materials, and (2) to demonstrate their usefulness for structural analysis of hot section components of gas turbine engines. The unified models selected for development and evaluation were those of Bodner-Partom and of Walker. The unified approach for elastic-viscoplastic constitutive equations is a viable method for representing and predicting material response characteristics in the range where strain rate and temperature dependent inelastic deformations are experienced. This conclusion is reached by extensive comparison of model calculations against the experimental results of a test program of two high temperature Ni-base alloys, B1900+Hf and Mar-M247, over a wide temperature range for a variety of deformation and thermal histories including uniaxial, multiaxial, and thermomechanical loading paths. The applicability of the Bodner-Partom and the Walker models for structural applications has been demonstrated by implementing these models into the MARC finite element code and by performing a number of analyses including thermomechanical histories on components of hot sections of gas turbine engines and benchmark notch tensile specimens. The results of the 4-year program have been published in four annual reports. The results of the base program are summarized in this report. The tasks covered include: (1) development of material test procedures, (2) thermal history effects, and (3) verification of the constitutive model for an alternative material.

If Leviathan Has a Face, Does Gaia Have a Soul?: Incorporating Environmental Education in Marine Eco-tourism Programs.

ERIC Educational Resources Information Center

Forestell, Paul H.

1993-01-01

Presents a model for structuring marine eco-tourism programs to capitalize on a range of cognitive states experienced by tourists in a novel marine environment setting. The model is demonstrated in the context of a whalewatch trip in Hawaii. Discusses questions about the suitability and effectiveness of the model. (Author/MDH)

Exercise-Based Oncology Rehabilitation: Leveraging the Cardiac Rehabilitation Model

PubMed Central

Dittus, Kim L.; Lakoski, Susan G.; Savage, Patrick D.; Kokinda, Nathan; Toth, Michael; Stevens, Diane; Woods, Kimberly; O’Brien, Patricia; Ades, Philip A.

2014-01-01

PURPOSE The value of exercise and rehabilitative interventions for cancer survivors is increasingly clear and oncology rehabilitation programs could provide these important interventions. However, a pathway to create oncology rehabilitation has not been delineated. Community-based cardiac rehabilitation (CR) programs staffed by health care professionals with experience in providing rehabilitation and secondary prevention services to individuals with coronary heart disease are widely available and provide a potential model and location for oncology rehabilitation programs. Our purpose is to outline the rehabilitative needs of cancer survivors and demonstrate how oncology rehabilitation can be created using a cardiac rehabilitation model. METHODS We identify the impairments associated with cancer and its therapy that respond to rehabilitative interventions. Components of the CR model that would benefit cancer survivors are described. An example of an oncology rehabilitation program using a CR model is presented. RESULTS Cancer survivors have impairments associated with cancer and its therapy that improve with rehabilitation. Our experience demonstrates that effective rehabilitation services can be provided utilizing an existing CR infrastructure. Few adjustments to current cardiac rehabilitation models would be needed to provide oncology rehabilitation. Preliminary evidence suggests that cancer survivors participating in an oncology rehabilitation program experience improvements in psychological and physiologic parameters. CONCLUSIONS Utilizing the CR model of rehabilitative services and disease management provides a much needed mechanism to bring oncology rehabilitation to larger numbers of cancer survivors. PMID:25407596

Design, processing and testing of LSI arrays, hybrid microelectronics task

NASA Technical Reports Server (NTRS)

Himmel, R. P.; Stuhlbarg, S. M.; Ravetti, R. G.; Zulueta, P. J.; Rothrock, C. W.

1979-01-01

Mathematical cost models previously developed for hybrid microelectronic subsystems were refined and expanded. Rework terms related to substrate fabrication, nonrecurring developmental and manufacturing operations, and prototype production are included. Sample computer programs were written to demonstrate hybrid microelectric applications of these cost models. Computer programs were generated to calculate and analyze values for the total microelectronics costs. Large scale integrated (LST) chips utilizing tape chip carrier technology were studied. The feasibility of interconnecting arrays of LSU chips utilizing tape chip carrier and semiautomatic wire bonding technology was demonstrated.

The NASA/Industry Design Analysis Methods for Vibrations (DAMVIBS) Program - A government overview. [of rotorcraft technology development using finite element method

NASA Technical Reports Server (NTRS)

Kvaternik, Raymond G.

1992-01-01

An overview is presented of government contributions to the program called Design Analysis Methods for Vibrations (DAMV) which attempted to develop finite-element-based analyses of rotorcraft vibrations. NASA initiated the program with a finite-element modeling program for the CH-47D tandem-rotor helicopter. The DAMV program emphasized four areas including: airframe finite-element modeling, difficult components studies, coupled rotor-airframe vibrations, and airframe structural optimization. Key accomplishments of the program include industrywide standards for modeling metal and composite airframes, improved industrial designs for vibrations, and the identification of critical structural contributors to airframe vibratory responses. The program also demonstrated the value of incorporating secondary modeling details to improving correlation, and the findings provide the basis for an improved finite-element-based dynamics design-analysis capability.

Increasing dimension of structures by 4D printing shape memory polymers via fused deposition modeling

NASA Astrophysics Data System (ADS)

Hu, G. F.; Damanpack, A. R.; Bodaghi, M.; Liao, W. H.

2017-12-01

The main objective of this paper is to introduce a 4D printing method to program shape memory polymers (SMPs) during fabrication process. Fused deposition modeling (FDM) as a filament-based printing method is employed to program SMPs during depositing the material. This method is implemented to fabricate complicated polymeric structures by self-bending features without need of any post-programming. Experiments are conducted to demonstrate feasibility of one-dimensional (1D)-to 2D and 2D-to-3D self-bending. It is shown that 3D printed plate structures can transform into masonry-inspired 3D curved shell structures by simply heating. Good reliability of SMP programming during printing process is also demonstrated. A 3D macroscopic constitutive model is established to simulate thermo-mechanical features of the printed SMPs. Governing equations are also derived to simulate programming mechanism during printing process and shape change of self-bending structures. In this respect, a finite element formulation is developed considering von-Kármán geometric nonlinearity and solved by implementing iterative Newton-Raphson scheme. The accuracy of the computational approach is checked with experimental results. It is demonstrated that the theoretical model is able to replicate the main characteristics observed in the experiments. This research is likely to advance the state of the art FDM 4D printing, and provide pertinent results and computational tool that are instrumental in design of smart materials and structures with self-bending features.

Materiel Acquisition Management of U.S. Army Attack Helicopters

DTIC Science & Technology

1989-06-02

used to evaluate the existing helicopter program periodically in order to determine utility in reference to all evaluation criteria. Defintion of... mixed integer linear programming model, the Phoenix model has demonstrated the potential to assist in the analysis of strategic and operational issues in...Fleet Max i of Aircraft per Fleet Programmed Buys .. -- Technology Unit Production mix Retirement Start-up ROTIE Flying Hour Aviation Overheadl I Aviation

Effects of the Communities That Care Model in Pennsylvania on Change in Adolescent Risk and Problem Behaviors

PubMed Central

Jones, Damon; Greenberg, Mark T.; Osgood, D. Wayne; Bontempo, Daniel

2015-01-01

Despite the public health burden of adolescent substance use, delinquency, and other problem behavior, few comprehensive models of disseminating evidence-based prevention programs to communities have demonstrated positive youth outcomes at a population level, capacity to maintain program fidelity, and sustainability. We examined whether the Communities That Care (CTC; Hawkins and Catalano 1992) model had a positive impact on risk/protective factors and academic and behavioral outcomes among adolescents in a quasi-experimental effectiveness study. We conducted a longitudinal study of CTC in Pennsylvania utilizing biannual surveillance data collected through anonymous in-school student surveys. We utilized multilevel models to examine CTC impact on change in risk/protective factors, grades, delinquency, and substance use over time. Youth in CTC communities demonstrated less growth in delinquency, but not substance use, than youth in non-CTC communities. Levels of risk factors increased more slowly, and protective factors and academic performance decreased more slowly, among CTC community grade-cohorts that were exposed to evidence-based, universal prevention programs than comparison grade cohorts. Community coalitions can affect adolescent risk and protective behaviors at a population level when evidence-based programs are utilized. CTC represents an effective model for disseminating such programs. PMID:20020209

Fuzzy multi-objective chance-constrained programming model for hazardous materials transportation

NASA Astrophysics Data System (ADS)

Du, Jiaoman; Yu, Lean; Li, Xiang

2016-04-01

Hazardous materials transportation is an important and hot issue of public safety. Based on the shortest path model, this paper presents a fuzzy multi-objective programming model that minimizes the transportation risk to life, travel time and fuel consumption. First, we present the risk model, travel time model and fuel consumption model. Furthermore, we formulate a chance-constrained programming model within the framework of credibility theory, in which the lengths of arcs in the transportation network are assumed to be fuzzy variables. A hybrid intelligent algorithm integrating fuzzy simulation and genetic algorithm is designed for finding a satisfactory solution. Finally, some numerical examples are given to demonstrate the efficiency of the proposed model and algorithm.

The Model Technology School: Toward Literacy through Technology. Technology.

ERIC Educational Resources Information Center

Schneider, Raymond J.

This paper describes one Florida school's experience with the Model Technology Schools (MTS) pilot program, and proposes a poetry curriculum for K-12 education that incorporates laserdisc technology for student presentations. Webster Elementary School in St. Augustine was the smallest of five schools chosen for the MTS program to demonstrate the…

Assessment Program Technical Progress Report, 1996-1997.

ERIC Educational Resources Information Center

McCown, Laurie; Fanning, Erin; Eickmeyer, Barbara

Coconino Community College (CCC) annually assesses its institutional effectiveness to demonstrate its commitment to improving programs and services to students. The 1996-97 Assessment Program Technical Progress Report records the assessment and institutional activities enacted during the academic year, detailing the assessment model, timelines,…

Multi-gene genetic programming based predictive models for municipal solid waste gasification in a fluidized bed gasifier.

PubMed

Pandey, Daya Shankar; Pan, Indranil; Das, Saptarshi; Leahy, James J; Kwapinski, Witold

2015-03-01

A multi-gene genetic programming technique is proposed as a new method to predict syngas yield production and the lower heating value for municipal solid waste gasification in a fluidized bed gasifier. The study shows that the predicted outputs of the municipal solid waste gasification process are in good agreement with the experimental dataset and also generalise well to validation (untrained) data. Published experimental datasets are used for model training and validation purposes. The results show the effectiveness of the genetic programming technique for solving complex nonlinear regression problems. The multi-gene genetic programming are also compared with a single-gene genetic programming model to show the relative merits and demerits of the technique. This study demonstrates that the genetic programming based data-driven modelling strategy can be a good candidate for developing models for other types of fuels as well. Copyright © 2014 Elsevier Ltd. All rights reserved.

The Enhancement Seminar Model as a Strategy to Promote Diversity and Student Success in MSW Programs

ERIC Educational Resources Information Center

Watson, Larry D.; Rycraft, Joan R.

2010-01-01

This study evaluates the effectiveness of an enhancement program by examining a cohort of 57 students admitted on probationary status to an MSW program in 2002 and required to participate in the enhancement program. The demographics for students admitted on probation demonstrate that the program is effective in increasing the diversity of the…

Financial and quality impacts of the Medicare physician group practice demonstration.

PubMed

Pope, Gregory; Kautter, John; Leung, Musetta; Trisolini, Michael; Adamache, Walter; Smith, Kevin

2014-01-01

To examine the impact of the Medicare Physician Group Practice (PGP) demonstration on expenditure, utilization, and quality outcomes. Secondary data analysis of 2001-2010 Medicare claims for 1,776,387 person years assigned to the ten participating provider organizations and 1,579,080 person years in the corresponding local comparison groups. We used a pre-post comparison group observational design consisting of four pre-demonstration years (1/01-12/04) and five demonstration years (4/05-3/10). We employed a propensity-weighted difference-in-differences regression model to estimate demonstration effects, adjusting for demographics, health status, geographic area, and secular trends. The ten demonstration sites combined saved $171 (2.0%) per assigned beneficiary person year (p<0.001) during the five-year demonstration period. Medicare paid performance bonuses to the participating PGPs that averaged $102 per person year. The net savings to the Medicare program were $69 (0.8%) per person year. Demonstration savings were achieved primarily from the inpatient setting. The demonstration improved quality of care as measured by six of seven claims-based process quality indicators. The PGP demonstration, which used a payment model similar to the Medicare Accountable Care Organization (ACO) program, resulted in small reductions in Medicare expenditures and inpatient utilization, and improvements in process quality indicators. Judging from this demonstration experience, it is unlikely that Medicare ACOs will initially achieve large savings. Nevertheless, ACOs paid through shared savings may be an important first step toward greater efficiency and quality in the Medicare fee-for-service program.

Model-based control strategies for systems with constraints of the program type

NASA Astrophysics Data System (ADS)

Jarzębowska, Elżbieta

2006-08-01

The paper presents a model-based tracking control strategy for constrained mechanical systems. Constraints we consider can be material and non-material ones referred to as program constraints. The program constraint equations represent tasks put upon system motions and they can be differential equations of orders higher than one or two, and be non-integrable. The tracking control strategy relies upon two dynamic models: a reference model, which is a dynamic model of a system with arbitrary order differential constraints and a dynamic control model. The reference model serves as a motion planner, which generates inputs to the dynamic control model. It is based upon a generalized program motion equations (GPME) method. The method enables to combine material and program constraints and merge them both into the motion equations. Lagrange's equations with multipliers are the peculiar case of the GPME, since they can be applied to systems with constraints of first orders. Our tracking strategy referred to as a model reference program motion tracking control strategy enables tracking of any program motion predefined by the program constraints. It extends the "trajectory tracking" to the "program motion tracking". We also demonstrate that our tracking strategy can be extended to a hybrid program motion/force tracking.

Report on the Model Tuition Assistance Demonstration Projects. The Worker Education and Training Policies Project.

ERIC Educational Resources Information Center

National Inst. for Work and Learning, Washington, DC.

Three demonstration projects were conducted to determine if worker attitudes toward and participation in employer- or union-sponsored tuition assistance (TA) programs could be favorably influenced by information dissemination, counseling, and links to area educational institutions. Model I consisted only of information dissemination about the…

A NASTRAN/TREETOPS solution to a flexible, multi-body dynamics and controls problem on a UNIX workstation

NASA Technical Reports Server (NTRS)

Benavente, Javier E.; Luce, Norris R.

1989-01-01

Demands for nonlinear time history simulations of large, flexible multibody dynamic systems has created a need for efficient interfaces between finite-element modeling programs and time-history simulations. One such interface, TREEFLX, an interface between NASTRAN and TREETOPS, a nonlinear dynamics and controls time history simulation for multibody structures, is presented and demonstrated via example using the proposed Space Station Mobile Remote Manipulator System (MRMS). The ability to run all three programs (NASTRAN, TREEFLX and TREETOPS), in addition to other programs used for controller design and model reduction (such as DMATLAB and TREESEL, both described), under a UNIX Workstation environment demonstrates the flexibility engineers now have in designing, developing and testing control systems for dynamically complex systems.

A Project to Demonstrate Incremental Improvements in a K-12 Career Education Program through an Exemplary Model. Final Financial Status and Performance Report.

ERIC Educational Resources Information Center

Northwestern Tri-County Intermediate Unit 5, Edinboro, PA.

A project was conducted based on the following three objectives: (1) demonstrate a regional plan for the implementation of an open entry-exit (flexible) career development program encompassing career awareness, career exploration, and career preparation; (2) expose each student to a range of career clusters within the context of his educational…

The New York State Model for Sharing Successful Programs: A Decade of Implementation and Evaluation.

ERIC Educational Resources Information Center

Egelston, Richard L.

To address educational reform needs in New York State, the State Education Department developed a research-based Sharing Successful Practices (SSP) Dissemination model. Under SSP, a program successful in meeting one district's needs can be adopted by other districts with similar needs. SSP has four components: validation, demonstration,…

Development of theoretical models of integrated millimeter wave antennas

NASA Technical Reports Server (NTRS)

Yngvesson, K. Sigfrid; Schaubert, Daniel H.

1991-01-01

Extensive radiation patterns for Linear Tapered Slot Antenna (LTSA) Single Elements are presented. The directivity of LTSA elements is predicted correctly by taking the cross polarized pattern into account. A moment method program predicts radiation patterns for air LTSAs with excellent agreement with experimental data. A moment method program was also developed for the task LTSA Array Modeling. Computations performed with this program are in excellent agreement with published results for dipole and monopole arrays, and with waveguide simulator experiments, for more complicated structures. Empirical modeling of LTSA arrays demonstrated that the maximum theoretical element gain can be obtained. Formulations were also developed for calculating the aperture efficiency of LTSA arrays used in reflector systems. It was shown that LTSA arrays used in multibeam systems have a considerable advantage in terms of higher packing density, compared with waveguide feeds. Conversion loss of 10 dB was demonstrated at 35 GHz.

The value of early flight evaluation of propulsion concepts using the NASA F-15 research airplane

NASA Technical Reports Server (NTRS)

Burcham, Frank W., Jr.; Ray, Ronald J.

1987-01-01

The value of early flight evaluation of propulsion and propulsion control concepts was demonstrated on the NASA F-15 airplane in programs such as highly integrated digital electronic control (HIDEC), the F100 engine model derivative (EMD), and digital electronic engine control (DEEC). (In each case, the value of flight demonstration was conclusively demonstrated). This paper described these programs, and discusses the results that were not expected, based on ground test or analytical prediction. The role of flight demonstration in facilitating transfer of technology from the laboratory to operational airplanes is discussed.

Using Avatars to Model Weight Loss Behaviors: Participant Attitudes and Technology Development

PubMed Central

Napolitano, Melissa A.; Hayes, Sharon; Russo, Giuseppe; Muresu, Debora; Giordano, Antonio; Foster, Gary D.

2013-01-01

Background: Virtual reality and other avatar-based technologies are potential methods for demonstrating and modeling weight loss behaviors. This study examined avatar-based technology as a tool for modeling weight loss behaviors. Methods: This study consisted of two phases: (1) an online survey to obtain feedback about using avatars for modeling weight loss behaviors and (2) technology development and usability testing to create an avatar-based technology program for modeling weight loss behaviors. Results: Results of phase 1 (n = 128) revealed that interest was high, with 88.3% stating that they would participate in a program that used an avatar to help practice weight loss skills in a virtual environment. In phase 2, avatars and modules to model weight loss skills were developed. Eight women were recruited to participate in a 4-week usability test, with 100% reporting they would recommend the program and that it influenced their diet/exercise behavior. Most women (87.5%) indicated that the virtual models were helpful. After 4 weeks, average weight loss was 1.6 kg (standard deviation = 1.7). Conclusion: This investigation revealed a high level of interest in an avatar-based program, with formative work indicating promise. Given the high costs associated with in vivo exposure and practice, this study demonstrates the potential use of avatar-based technology as a tool for modeling weight loss behaviors. PMID:23911189

Employee Assistance Programs: Effective Tools for Counseling Employees.

ERIC Educational Resources Information Center

Kraft, Ed

1991-01-01

College employee assistance program designs demonstrate the varied needs of a workforce. Whatever the model, the helping approach remains to (1) identify problem employees through performance-related issues; (2) refer them to the assistance program for further intervention; and (3) follow up with employee and supervisor to ensure a successful…

Conservation of northern bobwhite on private lands in Georgia, USA under uncertainty about landscape-level habitat effects

USGS Publications Warehouse

Howell, J.E.; Moore, C.T.; Conroy, M.J.; Hamrick, R.G.; Cooper, R.J.; Thackston, R.E.; Carroll, J.P.

2009-01-01

Large-scale habitat enhancement programs for birds are becoming more widespread, however, most lack monitoring to resolve uncertainties and enhance program impact over time. Georgia?s Bobwhite Quail Initiative (BQI) is a competitive, proposal-based system that provides incentives to landowners to establish habitat for northern bobwhites (Colinus virginianus). Using data from monitoring conducted in the program?s first years (1999?2001), we developed alternative hierarchical models to predict bobwhite abundance in response to program habitat modifications on local and regional scales. Effects of habitat and habitat management on bobwhite population response varied among geographical scales, but high measurement variability rendered the specific nature of these scaled effects equivocal. Under some models, BQI had positive impact at both local farm scales (1, 9 km2), particularly when practice acres were clustered, whereas other credible models indicated that bird response did not depend on spatial arrangement of practices. Thus, uncertainty about landscape-level effects of management presents a challenge to program managers who must decide which proposals to accept. We demonstrate that optimal selection decisions can be made despite this uncertainty and that uncertainty can be reduced over time, with consequent improvement in management efficacy. However, such an adaptive approach to BQI program implementation would require the reestablishment of monitoring of bobwhite abundance, an effort for which funding was discontinued in 2002. For landscape-level conservation programs generally, our approach demonstrates the value in assessing multiple scales of impact of habitat modification programs, and it reveals the utility of addressing management uncertainty through multiple decision models and system monitoring.

Modeling the glass transition of amorphous networks for shape-memory behavior

NASA Astrophysics Data System (ADS)

Xiao, Rui; Choi, Jinwoo; Lakhera, Nishant; Yakacki, Christopher M.; Frick, Carl P.; Nguyen, Thao D.

2013-07-01

In this paper, a thermomechanical constitutive model was developed for the time-dependent behaviors of the glass transition of amorphous networks. The model used multiple discrete relaxation processes to describe the distribution of relaxation times for stress relaxation, structural relaxation, and stress-activated viscous flow. A non-equilibrium thermodynamic framework based on the fictive temperature was introduced to demonstrate the thermodynamic consistency of the constitutive theory. Experimental and theoretical methods were developed to determine the parameters describing the distribution of stress and structural relaxation times and the dependence of the relaxation times on temperature, structure, and driving stress. The model was applied to study the effects of deformation temperatures and physical aging on the shape-memory behavior of amorphous networks. The model was able to reproduce important features of the partially constrained recovery response observed in experiments. Specifically, the model demonstrated a strain-recovery overshoot for cases programmed below Tg and subjected to a constant mechanical load. This phenomenon was not observed for materials programmed above Tg. Physical aging, in which the material was annealed for an extended period of time below Tg, shifted the activation of strain recovery to higher temperatures and increased significantly the initial recovery rate. For fixed-strain recovery, the model showed a larger overshoot in the stress response for cases programmed below Tg, which was consistent with previous experimental observations. Altogether, this work demonstrates how an understanding of the time-dependent behaviors of the glass transition can be used to tailor the temperature and deformation history of the shape-memory programming process to achieve more complex shape recovery pathways, faster recovery responses, and larger activation stresses.

WASP TRANSPORT MODELING AND WASP ECOLOGICAL MODELING

EPA Science Inventory

A combination of lectures, demonstrations, and hands-on excercises will be used to introduce pollutant transport modeling with the U.S. EPA's general water quality model, WASP (Water Quality Analysis Simulation Program). WASP features include a user-friendly Windows-based interfa...

Lunar COTS: An Economical and Sustainable Approach to Reaching Mars

NASA Technical Reports Server (NTRS)

Zuniga, Allison F.; Rasky, Daniel; Pittman, Robert B.; Zapata, Edgar; Lepsch, Roger

2015-01-01

The NASA COTS (Commercial Orbital Transportation Services) Program was a very successful program that developed and demonstrated cost-effective development and acquisition of commercial cargo transportation services to the International Space Station (ISS). The COTS acquisition strategy utilized a newer model than normally accepted in traditional procurement practices. This new model used Space Act Agreements where NASA entered into partnerships with industry to jointly share cost, development and operational risks to demonstrate new capabilities for mutual benefit. This model proved to be very beneficial to both NASA and its industry partners as NASA saved significantly in development and operational costs while industry partners successfully expanded their market share of the global launch transportation business. The authors, who contributed to the development of the COTS model, would like to extend this model to a lunar commercial services program that will push development of technologies and capabilities that will serve a Mars architecture and lead to an economical and sustainable pathway to transporting humans to Mars. Over the past few decades, several architectures for the Moon and Mars have been proposed and studied but ultimately halted or not even started due to the projected costs significantly exceeding NASA's budgets. Therefore a new strategy is needed that will fit within NASA's projected budgets and takes advantage of the US commercial industry along with its creative and entrepreneurial attributes. The authors propose a new COTS-like program to enter into partnerships with industry to demonstrate cost-effective, cis-lunar commercial services, such as lunar transportation, lunar ISRU operations, and cis-lunar propellant depots that can enable an economical and sustainable Mars architecture. Similar to the original COTS program, the goals of the proposed program, being notionally referred to as Lunar Commercial Orbital Transfer Services (LCOTS) program will be to: 1) reduce development and operational costs by sharing costs with industry; 2) create new markets in cis-lunar space to further reduce operational costs; and 3) enable NASA to develop an affordable and economical exploration Mars architecture. The paper will describe a plan for a proposed LCOTS program, its potential impact to an eventual Mars architecture and its many benefits to NASA, commercial space industry and the US economy.

A numerical simulation of the dispersal of aerial sprays

NASA Technical Reports Server (NTRS)

Bragg, M. B.

1981-01-01

A computer program was developed to predict the trajectory, ground deposition, and drift of liquid sprays injected into the wake of an agricultural aircraft in ground effect. The program uses a horseshoe vortex wake model and includes the effects of liquid droplet evaporation, crosswind, the propeller slipstream, ground effect, and tunnel walls on small scale models. This user's guide includes several case examples demonstrating user options. A complete listing of the FORTRAN program is provided.

SYVA: A program to analyze symmetry of molecules based on vector algebra

NASA Astrophysics Data System (ADS)

Gyevi-Nagy, László; Tasi, Gyula

2017-06-01

Symmetry is a useful concept in physics and chemistry. It can be used to find out some simple properties of a molecule or simplify complex calculations. In this paper a simple vector algebraic method is described to determine all symmetry elements of an arbitrary molecule. To carry out the symmetry analysis, a program has been written, which is also capable of generating the framework group of the molecule, revealing the symmetry properties of normal modes of vibration and symmetrizing the structure. To demonstrate the capabilities of the program, it is compared to other common widely used stand-alone symmetry analyzer (SYMMOL, Symmetrizer) and molecular modeling (NWChem, ORCA, MRCC) software. SYVA can generate input files for molecular modeling programs, e.g. Gaussian, using precisely symmetrized molecular structures. Possible applications are also demonstrated by integrating SYVA with the GAMESS and MRCC software.

Home Oxygen Program review: Regionalization in Vancouver Coastal Health and British Columbia.

PubMed

Sandberg, Dan

2015-01-01

Since its inception in the 1980s, the Home Oxygen Program in British Columbia was centrally managed by the Ministry of Health. Initially a small program with few clients across the province, it soon became a large program with many clients and increasing expenditures. A pilot program started in Victoria (British Columbia) in 1996 demonstrated that managing the program locally could offer better client care, better contract management and significant cost savings. In 2002, the pilot's model and recommendations were implemented in British Columbia's five health authorities. The present review details the experiences of regionalizing the program in the Vancouver Coastal Health authority. After fine adjustments to the model were developed and new contracts and criteria changes made, better care for clients was provided than the previous centralized model at a reduced cost to the taxpayer.

Repetition priming of motor activity mediated by a central pattern generator: the importance of extrinsic vs. intrinsic program initiators

PubMed Central

Siniscalchi, Michael J.; Jing, Jian; Weiss, Klaudiusz R.

2016-01-01

Repetition priming is characterized by increased performance as a behavior is repeated. Although this phenomenon is ubiquitous, mediating mechanisms are poorly understood. We address this issue in a model system, the feeding network of Aplysia. This network generates both ingestive and egestive motor programs. Previous data suggest a chemical coding model: ingestive and egestive inputs to the feeding central pattern generator (CPG) release different modulators, which act via different second messengers to prime motor activity in different ways. The ingestive input to the CPG (neuron CBI-2) releases the peptides feeding circuit activating peptide and cerebral peptide 2, which produce an ingestive pattern of activity. The egestive input to the CPG (the esophageal nerve) releases the peptide small cardioactive peptide. This model is based on research that focused on a single aspect of motor control (radula opening). Here we ask whether repetition priming is observed if activity is triggered with a neuron within the core CPG itself and demonstrate that it is not. Moreover, previous studies demonstrated that effects of modulatory neurotransmitters that induce repetition priming persist. This suggests that it should be possible to “prime” motor programs triggered from within the CPG by first stimulating extrinsic modulatory inputs. We demonstrate that programs triggered after ingestive input activation are ingestive and programs triggered after egestive input activation are egestive. We ask where this priming occurs and demonstrate modifications within the CPG itself. This arrangement is likely to have important consequences for “task” switching, i.e., the cessation of one type of motor activity and the initiation of another. PMID:27466134

Meeting in Turkey: WASP Transport Modeling and WASP Ecological Modeling

EPA Science Inventory

A combination of lectures, demonstrations, and hands-on excercises will be used to introduce pollutant transport modeling with the U.S. EPA's general water quality model, WASP (Water Quality Analysis Simulation Program). WASP features include a user-friendly Windows-based interfa...

Meeting in Korea: WASP Transport Modeling and WASP Ecological Modeling

EPA Science Inventory

A combination of lectures, demonstrations, and hands-on excercises will be used to introduce pollutant transport modeling with the U.S. EPA's general water quality model, WASP (Water Quality Analysis Simulation Program). WASP features include a user-friendly Windows-based interfa...

Overview of heat transfer and fluid flow problem areas encountered in Stirling engine modeling

NASA Technical Reports Server (NTRS)

Tew, Roy C., Jr.

1988-01-01

NASA Lewis Research Center has been managing Stirling engine development programs for over a decade. In addition to contractual programs, this work has included in-house engine testing and development of engine computer models. Attempts to validate Stirling engine computer models with test data have demonstrated that engine thermodynamic losses need better characterization. Various Stirling engine thermodynamic losses and efforts that are underway to characterize these losses are discussed.

Industrial Automation Mechanic Model Curriculum Project. Final Report.

ERIC Educational Resources Information Center

Toledo Public Schools, OH.

This document describes a demonstration program that developed secondary level competency-based instructional materials for industrial automation mechanics. Program activities included task list compilation, instructional materials research, learning activity packet (LAP) development, construction of lab elements, system implementation,…

Comprehensive Physical Education Program Model

ERIC Educational Resources Information Center

Kamiya, Artie

2005-01-01

In 2004, the Wake County Public School System (North Carolina) received $1.3 million as one of 237 national winners of the $70 million federal Carol M. White Physical Education Program (PEP) Grant competition. The PEP Grant program is funded by the U.S. Department of Education and provides monies to school districts able to demonstrate the…

Involvement of Black Fathers in Head Start. Final Report 1987.

ERIC Educational Resources Information Center

Gary, Lawrence E.; And Others

This report evaluates the implementation of a demonstration model of a father-involvement component of Head Start programs in Washington (District of Columbia). Since well over 90 percent of the children in area Head Start programs are Black, the target group for this project was Black fathers. The following recommendations for program improvement…

Special Programs for Individual Needs (SPIN). Handicapped Children Early Education Program: P.L. 91-230 Title VI, Part C. Final Report, July 1, 1974 to June 30, 1977.

ERIC Educational Resources Information Center

Wight, Byron W.

The document contains the final report of the Special Programs for Individualized Needs (SPIN) program designed to develop a demonstration model for training day care personnel to identify developmentally delayed or emotionally disturbed children and to program for them within the regular day care setting. Major objectives were to develop…

Programming stress-induced altruistic death in engineered bacteria

PubMed Central

Tanouchi, Yu; Pai, Anand; Buchler, Nicolas E; You, Lingchong

2012-01-01

Programmed death is often associated with a bacterial stress response. This behavior appears paradoxical, as it offers no benefit to the individual. This paradox can be explained if the death is ‘altruistic': the killing of some cells can benefit the survivors through release of ‘public goods'. However, the conditions where bacterial programmed death becomes advantageous have not been unambiguously demonstrated experimentally. Here, we determined such conditions by engineering tunable, stress-induced altruistic death in the bacterium Escherichia coli. Using a mathematical model, we predicted the existence of an optimal programmed death rate that maximizes population growth under stress. We further predicted that altruistic death could generate the ‘Eagle effect', a counter-intuitive phenomenon where bacteria appear to grow better when treated with higher antibiotic concentrations. In support of these modeling insights, we experimentally demonstrated both the optimality in programmed death rate and the Eagle effect using our engineered system. Our findings fill a critical conceptual gap in the analysis of the evolution of bacterial programmed death, and have implications for a design of antibiotic treatment. PMID:23169002

Multilevel selected primary prevention of child maltreatment.

PubMed

Peterson, Lizette; Tremblay, George; Ewigman, Bernard; Saldana, Lisa

2003-06-01

Few treatment studies and even fewer primary prevention studies have demonstrated successful reduction of child maltreatment. Successful preventive interventions have often been lengthy and expensive; shorter programs have been didactic and ineffective. The present investigation relied on a 7-level model of successful parenting to mount a time-limited, "selected" prevention effort with high-risk mothers. This program included modeling, role-playing, Socratic dialogue, home practice, and home visits. The study demonstrated effective intervention at every level of the model, including improvements in (a) parenting skills, (b) developmentally appropriate interventions, (c) developmentally appropriate beliefs, (d) negative affect, (e) acceptance of a responsible parent role, (f) acceptance of a nurturing parent role, and (g) self-efficacy. Directions for future research are considered.

Mentoring Interventions and the Impact of Protective Assets on the Reproductive Health of Adolescent Girls and Young Women.

PubMed

Plourde, Kate F; Ippoliti, Nicole B; Nanda, Geeta; McCarraher, Donna R

2017-08-01

Adolescent girls and young women (AGYW) are disproportionately affected by HIV and AIDS and other negative reproductive health (RH) outcomes. Emerging evidence suggests that programs to build AGYW's assets can help reduce their vulnerability to poor RH. Mentoring interventions have demonstrated a positive impact on a variety of youth development outcomes, including the protective assets needed to circumvent poor RH outcomes. The purpose of this review was to understand the types of mentoring programs for AGYW that have demonstrated effectiveness in improving protective assets, and/or, RH knowledge, intentions, behaviors, or outcomes themselves. Interventions were identified through an electronic search of the peer-reviewed and the gray literature. Studies were excluded in stages based on reviews of titles, abstracts, and full text. A review of 491 publications yielded a total of 19 articles that were included in the final review. The majority of the publications examined the impact of the one-to-one mentoring model in the United States. However, a good proportion examined the impact of both one-on-one and group-based interventions globally. The few interventions that followed a group-based model demonstrated more promise; evaluations of this model demonstrated a positive impact on RH knowledge and behavior, academic achievement, financial behavior, and social networks, as well as reductions in the experience of violence. Group-based mentoring programs demonstrated the most promise in building AGYW's protective assets and improving their RH outcomes. The most successful interventions consisted of multiple components, including mentoring, that sought to directly improve AGYW's protective assets and met with more frequency over a longer duration. Despite the promising evidence, more research is needed to better understand the relationship between assets and RH; the characteristics of successful mentoring programs; and the influence mentoring alone has on RH outcomes, versus mentoring as part of a larger RH program. Copyright © 2017 Society for Adolescent Health and Medicine. All rights reserved.

A User's Guide for the Differential Reduced Ejector/Mixer Analysis "DREA" Program. 1.0

NASA Technical Reports Server (NTRS)

DeChant, Lawrence J.; Nadell, Shari-Beth

1999-01-01

A system of analytical and numerical two-dimensional mixer/ejector nozzle models that require minimal empirical input has been developed and programmed for use in conceptual and preliminary design. This report contains a user's guide describing the operation of the computer code, DREA (Differential Reduced Ejector/mixer Analysis), that contains these mathematical models. This program is currently being adopted by the Propulsion Systems Analysis Office at the NASA Glenn Research Center. A brief summary of the DREA method is provided, followed by detailed descriptions of the program input and output files. Sample cases demonstrating the application of the program are presented.

Validation of a Scalable Solar Sailcraft

NASA Technical Reports Server (NTRS)

Murphy, D. M.

2006-01-01

The NASA In-Space Propulsion (ISP) program sponsored intensive solar sail technology and systems design, development, and hardware demonstration activities over the past 3 years. Efforts to validate a scalable solar sail system by functional demonstration in relevant environments, together with test-analysis correlation activities on a scalable solar sail system have recently been successfully completed. A review of the program, with descriptions of the design, results of testing, and analytical model validations of component and assembly functional, strength, stiffness, shape, and dynamic behavior are discussed. The scaled performance of the validated system is projected to demonstrate the applicability to flight demonstration and important NASA road-map missions.

Disease management for chronically ill beneficiaries in traditional Medicare.

PubMed

Bott, David M; Kapp, Mary C; Johnson, Lorraine B; Magno, Linda M

2009-01-01

We summarize the Centers for Medicare and Medicaid Services' (CMS's) experience with disease management (DM) in fee-for-service Medicare. Since 1999, the CMS has conducted seven DM demonstrations involving some 300,000 beneficiaries in thirty-five programs. Programs include provider-based, third-party, and hybrid models. Reducing costs sufficient to cover program fees has proved particularly challenging. Final evaluations on twenty programs found three with evidence of quality improvement at or near budget-neutrality, net of fees. Interim monitoring covering at least twenty-one months on the remaining fifteen programs suggests that four are close to covering their fees. Characteristics of the traditional Medicare program present a challenge to these DM models.

ICU early physical rehabilitation programs: financial modeling of cost savings.

PubMed

Lord, Robert K; Mayhew, Christopher R; Korupolu, Radha; Mantheiy, Earl C; Friedman, Michael A; Palmer, Jeffrey B; Needham, Dale M

2013-03-01

To evaluate the potential annual net cost savings of implementing an ICU early rehabilitation program. Using data from existing publications and actual experience with an early rehabilitation program in the Johns Hopkins Hospital Medical ICU, we developed a model of net financial savings/costs and presented results for ICUs with 200, 600, 900, and 2,000 annual admissions, accounting for both conservative- and best-case scenarios. Our example scenario provided a projected financial analysis of the Johns Hopkins Medical ICU early rehabilitation program, with 900 admissions per year, using actual reductions in length of stay achieved by this program. U.S.-based adult ICUs. Financial modeling of the introduction of an ICU early rehabilitation program. Net cost savings generated in our example scenario, with 900 annual admissions and actual length of stay reductions of 22% and 19% for the ICU and floor, respectively, were $817,836. Sensitivity analyses, which used conservative- and best-case scenarios for length of stay reductions and varied the per-day ICU and floor costs, across ICUs with 200-2,000 annual admissions, yielded financial projections ranging from -$87,611 (net cost) to $3,763,149 (net savings). Of the 24 scenarios included in these sensitivity analyses, 20 (83%) demonstrated net savings, with a relatively small net cost occurring in the remaining four scenarios, mostly when simultaneously combining the most conservative assumptions. A financial model, based on actual experience and published data, projects that investment in an ICU early rehabilitation program can generate net financial savings for U.S. hospitals. Even under the most conservative assumptions, the projected net cost of implementing such a program is modest relative to the substantial improvements in patient outcomes demonstrated by ICU early rehabilitation programs.

Models for Improving the Delivery of Services to: Gifted Students in the Areas of Visual and Performing Arts. Research & Demonstration Series in Gifted Education.

ERIC Educational Resources Information Center

Ohio State Dept. of Education, Columbus. Div. of Special Education.

This report describes three model demonstration projects in Ohio school districts which focused on strategies for identifying students gifted in visual and performing arts and delivering hands-on arts education and appreciation experiences. Presented for each program is information on: identifying characteristics (district, location, school…

A finite element program for postbuckling calculations (PSTBKL)

NASA Technical Reports Server (NTRS)

Simitses, G. T.; Carlson, R. L.; Riff, R.

1991-01-01

The object of the research reported herein was to develop a general mathematical model and solution methodologies for analyzing the structural response of thin, metallic shell structures under large transient, cyclic, or static thermochemical loads. This report describes the computer program resulting from the research. Among the system responses associated with these loads and conditions are thermal buckling, creep buckling, and ratcheting. Thus geometric and material nonlinearities (of high order) have been anticipated and are considered in developing the mathematical model. The methodology is demonstrated through different problems of extension, shear, and of planar curved beams. Moreover, importance of the inclusion of large strains is clearly demonstrated, through the chosen applications.

A BASIC Program for Use in Teaching Population Dynamics.

ERIC Educational Resources Information Center

Kidd, N. A. C.

1984-01-01

Describes an interactive simulation model which can be used to demonstrate population growth with discrete or overlapping populations and the effects of random, constant, or density-dependent mortality. The program listing (for Commodore PET 4032 microcomputer) is included. (Author/DH)

75 FR 42760 - Statement of Organization, Functions, and Delegations of Authority

Federal Register 2010, 2011, 2012, 2013, 2014

2010-07-22

... accounting reports and invoices, and monitoring all spending. The Team develops, defends and executes the... results; performance measurement; research and evaluation methodologies; demonstration testing and model... ACF programs; strategic planning; performance measurement; program and policy evaluation; research and...

Four High-Visibility Enforcement Demonstration Waves in Connecticut and New York Reduce Hand-Held Phone Use

DOT National Transportation Integrated Search

2011-07-01

The National Highway Traffic : Safety Administration initiated : distracted driving demonstration : programs in two communities : to test whether a high-visibility : enforcement (HVE) model could : reduce two specific instances : of distracted drivin...

40 CFR 60.2700 - How do I demonstrate initial compliance with the amended emission limitations and establish the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF... Solid Waste Incineration Units Model Rule-Initial Compliance Requirements § 60.2700 How do I demonstrate...

40 CFR 60.2700 - How do I demonstrate initial compliance with the amended emission limitations and establish the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF... Solid Waste Incineration Units Model Rule-Initial Compliance Requirements § 60.2700 How do I demonstrate...

Development of a sustainable community-based dental education program.

PubMed

Piskorowski, Wilhelm A; Fitzgerald, Mark; Mastey, Jerry; Krell, Rachel E

2011-08-01

Increasing the use of community-based programs is an important trend in improving dental education to meet the needs of students and the public. To support this trend, understanding the history of programs that have established successful models for community-based education is valuable for the creation and development of new programs. The community-based education model of the University of Michigan School of Dentistry (UMSOD) offers a useful guide for understanding the essential steps and challenges involved in developing a successful program. Initial steps in program development were as follows: raising funds, selecting an outreach clinical model, and recruiting clinics to become partners. As the program developed, the challenges of creating a sustainable financial model with the highest educational value required the inclusion of new clinical settings and the creation of a unique revenue-sharing model. Since the beginning of the community-based program at UMSOD in 2000, the number of community partners has increased to twenty-seven clinics, and students have treated thousands of patients in need. Fourth-year students now spend a minimum of ten weeks in community-based clinical education. The community-based program at UMSOD demonstrates the value of service-based education and offers a sustainable model for the development of future programs.

Energy efficiency in nonprofit agencies: Creating effective program models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown, M.A.; Prindle, B.; Scherr, M.I.

Nonprofit agencies are a critical component of the health and human services system in the US. It has been clearly demonstrated by programs that offer energy efficiency services to nonprofits that, with minimal investment, they can educe their energy consumption by ten to thirty percent. This energy conservation potential motivated the Department of Energy and Oak Ridge National Laboratory to conceive a project to help states develop energy efficiency programs for nonprofits. The purpose of the project was two-fold: (1) to analyze existing programs to determine which design and delivery mechanisms are particularly effective, and (2) to create model programsmore » for states to follow in tailoring their own plans for helping nonprofits with energy efficiency programs. Twelve existing programs were reviewed, and three model programs were devised and put into operation. The model programs provide various forms of financial assistance to nonprofits and serve as a source of information on energy efficiency as well. After examining the results from the model programs (which are still on-going) and from the existing programs, several replicability factors'' were developed for use in the implementation of programs by other states. These factors -- some concrete and practical, others more generalized -- serve as guidelines for states devising program based on their own particular needs and resources.« less

OSATE Overview & Community Updates

DTIC Science & Technology

2015-02-15

update 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) Delange /Julien 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK...main language capabilities Modeling patterns & model samples for beginners Error-Model examples EMV2 model constructs Demonstration of tools Case

An Interactive Web-Based Program for Stepfamilies: Development and Evaluation of Efficacy

ERIC Educational Resources Information Center

Gelatt, Vicky A.; Adler-Baeder, Francesca; Seeley, John R.

2010-01-01

This study evaluated the efficacy of a family life education program for stepfamilies that is self-administered, interactive, and web-based. The program uses behavior-modeling videos to demonstrate effective couple, parenting, and stepparenting practices. A diverse sample of 300 parents/stepparents of a child aged 11-15 years were randomized into…

Supporting Extended Family Members (SEFAM) Program. An HCEEP Demonstration Project. Final Report, August 1, 1981-October 30, 1984.

ERIC Educational Resources Information Center

Washington Univ., Seattle. Child Development and Mental Retardation Center.

The report documents the progress and accomplishments of the SEFAM (Supporting Extended Family Members) Program, which developed model programs for fathers, siblings, and grandparents. The first section summarizes staff efforts for five project objectives: (1) to develop, expand, test, and refine the pilot "Fathers and Infants/Toddlers"…

Model Dropout Prevention Program at Reidsville Middle School: A Case Study Evaluation.

ERIC Educational Resources Information Center

O'Sullivan, Rita G.

This case study describes a 2-year (1988-90) demonstration dropout prevention program, a collaboration between a rural school and a university. The dropout prevention program attempts to identify effective teaching strategies that will increase the academic successes of at-risk sixth-grade students and expand the use of those strategies among the…

Demonstration of a Model for the Education and Training of Spanish-Speaking Entrepreneurs. Final Report.

ERIC Educational Resources Information Center

Ramirez, Carlo; And Others

A three-month Federally sponsored program for Spanish-speaking entrepreneurs in the San Francisco area was conducted in 1975 by Amex Systems to examine successful or exemplary education and training systems for minority entrepreneurs, develop a manual for organizing new training programs, and promote the establishment of additional programs. The…

Safety pilot model deployment : lessons learned and recommendations for future connected vehicle activities.

DOT National Transportation Integrated Search

2015-09-01

The Connected Vehicle Safety Pilot was a research program that demonstrated the readiness of DSRC-based connected vehicle safety applications for nationwide deployment. The vision of the Connected Vehicle Safety Pilot Program was to test connected ve...

TADS Needs Assessment Procedures Manual, Summer 1980.

ERIC Educational Resources Information Center

Black, Talbot; And Others

The TADS (Technical Assistance Development System) Needs Assessment Manual is designed to guide the comprehensive review of Handicapped Children's Early Education Program (HCEEP) demonstration projects in identifying technical assistance needs. An introduction reviews the TADS technical assistance model which includes program planning, needs…

The importance of context in logic model construction for a multi-site community-based Aboriginal driver licensing program.

PubMed

Cullen, Patricia; Clapham, Kathleen; Byrne, Jake; Hunter, Kate; Senserrick, Teresa; Keay, Lisa; Ivers, Rebecca

2016-08-01

Evidence indicates that Aboriginal people are underrepresented among driver licence holders in New South Wales, which has been attributed to licensing barriers for Aboriginal people. The Driving Change program was developed to provide culturally responsive licensing services that engage Aboriginal communities and build local capacity. This paper outlines the formative evaluation of the program, including logic model construction and exploration of contextual factors. Purposive sampling was used to identify key informants (n=12) from a consultative committee of key stakeholders and program staff. Semi-structured interviews were transcribed and thematically analysed. Data from interviews informed development of the logic model. Participants demonstrated high level of support for the program and reported that it filled an important gap. The program context revealed systemic barriers to licensing that were correspondingly targeted by specific program outputs in the logic model. Addressing underlying assumptions of the program involved managing local capacity and support to strengthen implementation. This formative evaluation highlights the importance of exploring program context as a crucial first step in logic model construction. The consultation process assisted in clarifying program goals and ensuring that the program was responding to underlying systemic factors that contribute to inequitable licensing access for Aboriginal people. Copyright © 2016 Elsevier Ltd. All rights reserved.

Repurposing Waste Streams: Lessons on Integrating Hospital Food Waste into a Community Garden.

PubMed

Galvan, Adri M; Hanson, Ryan; George, Daniel R

2018-04-06

There have been increasing efforts in recent decades to divert institutional food waste into composting programs. As major producers of food waste who must increasingly demonstrate community benefit, hospitals have an incentive to develop such programs. In this article, we explain the emerging opportunity to link hospitals' food services to local community gardens in order to implement robust composting programs. We describe a partnership model at our hospital in central Pennsylvania, share preliminary outcomes establishing feasibility, and offer guidance for future efforts. We also demonstrate that the integration of medical students in such efforts can foster systems thinking in the development of programs to manage hospital waste streams in more ecologically-friendly ways.

EvoBuild: A Quickstart Toolkit for Programming Agent-Based Models of Evolutionary Processes

NASA Astrophysics Data System (ADS)

Wagh, Aditi; Wilensky, Uri

2018-04-01

Extensive research has shown that one of the benefits of programming to learn about scientific phenomena is that it facilitates learning about mechanisms underlying the phenomenon. However, using programming activities in classrooms is associated with costs such as requiring additional time to learn to program or students needing prior experience with programming. This paper presents a class of programming environments that we call quickstart: Environments with a negligible threshold for entry into programming and a modest ceiling. We posit that such environments can provide benefits of programming for learning without incurring associated costs for novice programmers. To make this claim, we present a design-based research study conducted to compare programming models of evolutionary processes with a quickstart toolkit with exploring pre-built models of the same processes. The study was conducted in six seventh grade science classes in two schools. Students in the programming condition used EvoBuild, a quickstart toolkit for programming agent-based models of evolutionary processes, to build their NetLogo models. Students in the exploration condition used pre-built NetLogo models. We demonstrate that although students came from a range of academic backgrounds without prior programming experience, and all students spent the same number of class periods on the activities including the time students took to learn programming in this environment, EvoBuild students showed greater learning about evolutionary mechanisms. We discuss the implications of this work for design research on programming environments in K-12 science education.

Visible ink: A flexible and individually tailored writing intervention for cancer patients.

PubMed

Corner, Geoffrey W; Jhanwar, Sabrina M; Kelman, Judith; Pessin, Hayley; Stein, Emma; Breitbart, William

2015-04-01

Subjective reports on the effectiveness of and satisfaction with writing interventions in medical populations have indicated that they can have a profound impact on patients. Further, past research on these programs has demonstrated that they can lead to a number of different positive outcomes depending on the personal characteristics of the participating patients and the type of writing with which they are tasked. For this reason, a flexible and individually tailored writing intervention may be particularly effective for patients, molding its approach to their desires and backgrounds. This paper examines Visible Ink, a writing program for cancer patients at Memorial Sloan-Kettering Cancer Center (MSKCC) that follows this model. At Visible Ink's First Fall Writing Festival in November 2012, an optional survey was provided to all program participants in attendance, capturing both quantitative and qualitative information on patient experiences in the program. Twenty-nine surveys were completed. The program appears to have a variety of positive effects, including fostering personal growth and providing a positive distraction. Respondents reported that they write in a number of different genres on topics both related and not related to their illnesses, which supports the flexible model of the program. All respondents indicated that they would recommend the program to others, and satisfaction with the program's general approach (i.e., individualized work with a writing coach) was unanimous. A few areas for potential improvement were also identified, most of which involved expanding the services and events offered by the program. Despite the limitations of this survey (e.g., small sample size and low response rate), its results support the promise of the Visible Ink model and demonstrate participants' satisfaction with the program. Future research can more thoroughly examine Visible Ink's effectiveness, and additional resources could enable the program to expand.

EXAMINING REGIONAL LAND USE CHANGE: THE COMMUNITY GROWTH MODEL (CGM)

EPA Science Inventory

The U. S. Environmental Protection Agency's Regional Vulnerability Assessment
Program (ReV A) is designed to develop and demonstrate approaches to identify the ecosystems at the greatest risk from regional population growth and economic activity.
As part of this program, ...

Urban Street Gang Enforcement.

ERIC Educational Resources Information Center

Institute for Law and Justice, Inc., Alexandria, VA.

Strategies to enhance prosecution of gang-related crimes are presented, with a focus on enforcement and prosecution targeting urban street gangs. The model programs introduced offer strategies largely based on the practical experiences of agencies that participated in a demonstration program, the Urban Street Gang Drug Trafficking Enforcement…

WHAEM: PROGRAM DOCUMENTATION FOR THE WELLHEAD ANALYTIC ELEMENT MODEL

EPA Science Inventory

The Wellhead Analytic Element Model (WhAEM) demonstrates a new technique for the definition of time-of-travel capture zones in relatively simple geohydrologic settings. he WhAEM package includes an analytic element model that uses superposition of (many) analytic solutions to gen...

A thermal scale modeling study for Apollo and Apollo applications, volume 1

NASA Technical Reports Server (NTRS)

Shannon, R. L.

1972-01-01

The program is reported for developing and demonstrating the capabilities of thermal scale modeling as a thermal design and verification tool for Apollo and Apollo Applications Projects. The work performed for thermal scale modeling of STB; cabin atmosphere/spacecraft cabin wall thermal interface; closed loop heat rejection radiator; and docked module/spacecraft thermal interface are discussed along with the test facility requirements for thermal scale model testing of AAP spacecraft. It is concluded that thermal scale modeling can be used as an effective thermal design and verification tool to provide data early in a spacecraft development program.

Automatic Generation of Directive-Based Parallel Programs for Shared Memory Parallel Systems

NASA Technical Reports Server (NTRS)

Jin, Hao-Qiang; Yan, Jerry; Frumkin, Michael

2000-01-01

The shared-memory programming model is a very effective way to achieve parallelism on shared memory parallel computers. As great progress was made in hardware and software technologies, performance of parallel programs with compiler directives has demonstrated large improvement. The introduction of OpenMP directives, the industrial standard for shared-memory programming, has minimized the issue of portability. Due to its ease of programming and its good performance, the technique has become very popular. In this study, we have extended CAPTools, a computer-aided parallelization toolkit, to automatically generate directive-based, OpenMP, parallel programs. We outline techniques used in the implementation of the tool and present test results on the NAS parallel benchmarks and ARC3D, a CFD application. This work demonstrates the great potential of using computer-aided tools to quickly port parallel programs and also achieve good performance.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dwyer, Morgan Maeve

This report summarizes the results of doctoral research that explored the cost impact of acquiring complex government systems jointly. The report begins by reviewing recent evidence that suggests that joint programs experience greater cost growth than non-joint programs. It continues by proposing an alternative approach for studying cost growth on government acquisition programs and demonstrates the utility of this approach by applying it to study the cost of jointness on three past programs that developed environmental monitoring systems for low-Earth orbit. Ultimately, the report concludes that joint programs' costs grow when the collaborating government agencies take action to retain ormore » regain their autonomy. The report provides detailed qualitative and quantitative data in support of this conclusion and generalizes its findings to other joint programs that were not explicitly studied here. Finally, it concludes by presenting a quantitative model that assesses the cost impacts of jointness and by demonstrating how government agencies can more effectively architect joint programs in the future.« less

Rapid Energy Modeling Workflow Demonstration Project

DTIC Science & Technology

2014-01-01

Conditioning Engineers BIM Building Information Model BLCC building life cycle costs BPA Building Performance Analysis CAD computer assisted...invited to enroll in the Autodesk Building Performance Analysis ( BPA ) Certificate Program under a group 30 specifically for DoD installation

NASTRAN user's guide (Level 17.5)

NASA Technical Reports Server (NTRS)

Field, E. I.; Herting, D. N.; Morgan, M. J.

1979-01-01

The user's guide is a handbook for engineers and analysts who use the NASTRAN finite element computer program supplements the NASTRAN Theoretical Manual (NASA SP-221), the NASTRAN User's Manual (NASA SP-222), the NASTRAN Programmer's Manual (NASA SP-223), and the NASTRAN Demonstration Program Manual (NASA SP-224). It provides modeling hints, attributes of the program, and references to the four manuals listed.

Effectiveness evaluation of STOL transport operations (phase 2). [computer simulation program of commercial short haul aircraft operations

NASA Technical Reports Server (NTRS)

Welp, D. W.; Brown, R. A.; Ullman, D. G.; Kuhner, M. B.

1974-01-01

A computer simulation program which models a commercial short-haul aircraft operating in the civil air system was developed. The purpose of the program is to evaluate the effect of a given aircraft avionics capability on the ability of the aircraft to perform on-time carrier operations. The program outputs consist primarily of those quantities which can be used to determine direct operating costs. These include: (1) schedule reliability or delays, (2) repairs/replacements, (3) fuel consumption, and (4) cancellations. More comprehensive models of the terminal area environment were added and a simulation of an existing airline operation was conducted to obtain a form of model verification. The capability of the program to provide comparative results (sensitivity analysis) was then demonstrated by modifying the aircraft avionics capability for additional computer simulations.

Sustaining new parents in home visitation services: key participant and program factors.

PubMed

Daro, Deborah; McCurdy, Karen; Falconnier, Lydia; Stojanovic, Daniela

2003-10-01

As prevention efforts have adopted more intensive service models, concerns over initial enrollment and retention rates have become more salient. This study examines the participant, provider and program factors that contribute to a longer length of stay and greater number of home visits for new parents enrolling in one national home visitation program. Retrospective data were collected on a random sample of 816 participants served by one of 17 Healthy Families America (HFA) program sites around the country. Using case record reviews, research staff documented each participant's characteristics and service experiences. To capture relevant staff and program information, research staff collected basic descriptive information from published documents and interviews with program managers. All home visitors who had contact with sample families also completed a self-assessment instrument regarding personal and professional characteristics. Hierarchical linear modeling allowed us to examine the unique role of participant, provider and program characteristics while recognizing the lack of independence among these three sets of variables. The combined provider and program levels in the HLM model accounted for one-third of the variance in service duration and one-quarter of the variance in the number of home visits. Older participants, those unemployed, and those who enrolled in the program early in their pregnancy were more likely to remain in services longer and to complete a greater number of home visits. Compared to White participants, African Americans and Hispanics were significantly more likely to remain in services longer and, in the case of African Americans, to receive a greater number of home visits. Participants who were enrolled in school were more likely to remain in services longer. Age was the only consistent provider characteristic associated with positive results in both models, with younger home visitors performing better. Prior experience showed a significant relationship only in the service dosage model and African American workers demonstrated greater success than White home visitors did in retaining families in service. At the program level, programs with lower caseloads and greater success in matching their participants and providers on parenting status and race/ethnicity were significantly more likely to demonstrate stronger enrollment patterns.

Flightdeck Automation Problems (FLAP) Model for Safety Technology Portfolio Assessment

NASA Technical Reports Server (NTRS)

Ancel, Ersin; Shih, Ann T.

2014-01-01

NASA's Aviation Safety Program (AvSP) develops and advances methodologies and technologies to improve air transportation safety. The Safety Analysis and Integration Team (SAIT) conducts a safety technology portfolio assessment (PA) to analyze the program content, to examine the benefits and risks of products with respect to program goals, and to support programmatic decision making. The PA process includes systematic identification of current and future safety risks as well as tracking several quantitative and qualitative metrics to ensure the program goals are addressing prominent safety risks accurately and effectively. One of the metrics within the PA process involves using quantitative aviation safety models to gauge the impact of the safety products. This paper demonstrates the role of aviation safety modeling by providing model outputs and evaluating a sample of portfolio elements using the Flightdeck Automation Problems (FLAP) model. The model enables not only ranking of the quantitative relative risk reduction impact of all portfolio elements, but also highlighting the areas with high potential impact via sensitivity and gap analyses in support of the program office. Although the model outputs are preliminary and products are notional, the process shown in this paper is essential to a comprehensive PA of NASA's safety products in the current program and future programs/projects.

77 FR 47077 - Statement of Organization, Functions, and Delegations of Authority; Office of Planning, Research...

Federal Register 2010, 2011, 2012, 2013, 2014

2012-08-07

...; surveys, research and evaluation methodologies; demonstration testing and model development; synthesis and..., policy and program analysis; surveys, research and evaluation methodologies; demonstration testing and... Organization, Functions, and Delegations of Authority; Office of Planning, Research and Evaluation AGENCY...

Simulation Model Development for Icing Effects Flight Training

NASA Technical Reports Server (NTRS)

Barnhart, Billy P.; Dickes, Edward G.; Gingras, David R.; Ratvasky, Thomas P.

2003-01-01

A high-fidelity simulation model for icing effects flight training was developed from wind tunnel data for the DeHavilland DHC-6 Twin Otter aircraft. First, a flight model of the un-iced airplane was developed and then modifications were generated to model the icing conditions. The models were validated against data records from the NASA Twin Otter Icing Research flight test program with only minimal refinements being required. The goals of this program were to demonstrate the effectiveness of such a simulator for training pilots to recognize and recover from icing situations and to establish a process for modeling icing effects to be used for future training devices.

Measuring Model-Based High School Science Instruction: Development and Application of a Student Survey

NASA Astrophysics Data System (ADS)

Fulmer, Gavin W.; Liang, Ling L.

2013-02-01

This study tested a student survey to detect differences in instruction between teachers in a modeling-based science program and comparison group teachers. The Instructional Activities Survey measured teachers' frequency of modeling, inquiry, and lecture instruction. Factor analysis and Rasch modeling identified three subscales, Modeling and Reflecting, Communicating and Relating, and Investigative Inquiry. As predicted, treatment group teachers engaged in modeling and inquiry instruction more than comparison teachers, with effect sizes between 0.55 and 1.25. This study demonstrates the utility of student report data in measuring teachers' classroom practices and in evaluating outcomes of a professional development program.

The NASA/industry Design Analysis Methods for Vibrations (DAMVIBS) program: McDonnell-Douglas Helicopter Company achievements

NASA Technical Reports Server (NTRS)

Toossi, Mostafa; Weisenburger, Richard; Hashemi-Kia, Mostafa

1993-01-01

This paper presents a summary of some of the work performed by McDonnell Douglas Helicopter Company under NASA Langley-sponsored rotorcraft structural dynamics program known as DAMVIBS (Design Analysis Methods for VIBrationS). A set of guidelines which is applicable to dynamic modeling, analysis, testing, and correlation of both helicopter airframes and a large variety of structural finite element models is presented. Utilization of these guidelines and the key features of their applications to vibration modeling of helicopter airframes are discussed. Correlation studies with the test data, together with the development and applications of a set of efficient finite element model checkout procedures, are demonstrated on a large helicopter airframe finite element model. Finally, the lessons learned and the benefits resulting from this program are summarized.

Small Engine Technology (SET) Task 23 ANOPP Noise Prediction for Small Engines, Wing Reflection Code

NASA Technical Reports Server (NTRS)

Lieber, Lysbeth; Brown, Daniel; Golub, Robert A. (Technical Monitor)

2000-01-01

The work performed under Task 23 consisted of the development and demonstration of improvements for the NASA Aircraft Noise Prediction Program (ANOPP), specifically targeted to the modeling of engine noise enhancement due to wing reflection. This report focuses on development of the model and procedure to predict the effects of wing reflection, and the demonstration of the procedure, using a representative wing/engine configuration.

Forward Skirt Structural Testing on the Space Launch System (SLS) Program

NASA Technical Reports Server (NTRS)

Lohrer, J. D.; Wright, R. D.

2016-01-01

Structural testing was performed to evaluate heritage forward skirts from the Space Shuttle program for use on the NASA Space Launch System (SLS) program. Testing was needed because SLS ascent loads are 35% higher than Space Shuttle loads. Objectives of testing were to determine margins of safety, demonstrate reliability, and validate analytical models. Testing combined with analysis was able to show heritage forward skirts were acceptable to use on the SLS program.

A Short Note on Estimating the Testlet Model with Different Estimators in Mplus

ERIC Educational Resources Information Center

Luo, Yong

2018-01-01

Mplus is a powerful latent variable modeling software program that has become an increasingly popular choice for fitting complex item response theory models. In this short note, we demonstrate that the two-parameter logistic testlet model can be estimated as a constrained bifactor model in Mplus with three estimators encompassing limited- and…

Markov chains for testing redundant software

NASA Technical Reports Server (NTRS)

White, Allan L.; Sjogren, Jon A.

1988-01-01

A preliminary design for a validation experiment has been developed that addresses several problems unique to assuring the extremely high quality of multiple-version programs in process-control software. The procedure uses Markov chains to model the error states of the multiple version programs. The programs are observed during simulated process-control testing, and estimates are obtained for the transition probabilities between the states of the Markov chain. The experimental Markov chain model is then expanded into a reliability model that takes into account the inertia of the system being controlled. The reliability of the multiple version software is computed from this reliability model at a given confidence level using confidence intervals obtained for the transition probabilities during the experiment. An example demonstrating the method is provided.

The Nursing Leadership Institute program evaluation: a critique

PubMed Central

Havaei, Farinaz; MacPhee, Maura

2015-01-01

A theory-driven program evaluation was conducted for a nursing leadership program, as a collaborative project between university faculty, the nurses’ union, the provincial Ministry of Health, and its chief nursing officers. A collaborative logic model process was used to engage stakeholders, and mixed methods approaches were used to answer evaluation questions. Despite demonstrated, successful outcomes, the leadership program was not supported with continued funding. This paper examines what happened during the evaluation process: What factors failed to sustain this program? PMID:29355180

Developmental milestones across the programmatic life cycle: implementing the CDC's Colorectal Cancer Screening Demonstration Program.

PubMed

Glover-Kudon, Rebecca; DeGroff, Amy; Rohan, Elizabeth A; Preissle, Judith; Boehm, Jennifer E

2013-08-01

In 2005 through 2009, the Centers for Disease Control and Prevention (CDC) funded 5 sites to implement a colorectal cancer screening program for uninsured, low-income populations. These 5 sites composed a demonstration project intended to explore the feasibility of establishing a national colorectal cancer screening program through various service delivery models. A longitudinal, multiple case study was conducted to understand and document program implementation processes. Using metaphor as a qualitative analytic technique, evaluators identified stages of maturation across the programmatic life cycle. Analysis rendered a working theory of program development during screening implementation. In early stages, program staff built relationships with CDC and local partners around screening readiness, faced real-world challenges putting program policies into practice, revised initial program designs, and developed new professional skills. Midterm implementation was defined by establishing program cohesiveness and expanding programmatic reach. In later stages of implementation, staff focused on sustainability and formal program closeout, which prompted reflection about personal and programmatic accomplishments. Demonstration sites evolved through common developmental stages during screening implementation. Findings elucidate ways to target technical assistance to more efficiently move programs along their maturation trajectory. In practical terms, the time and cost associated with guiding a program to maturity may be potentially shortened to maximize return on investment for both organizations and clients receiving service benefits. © 2013 American Cancer Society.

1993-1994 Final technical report for establishing the SECME Model in the District of Columbia

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vickers, R.G.

1995-12-31

This is the final report for a program to establish the SECME Model in the District of Columbia. This program has seen the development of a partnership between the District of Columbia Public Schools, the University of the District of Columbia, the Department of Energy, and SECME. This partnership has demonstrated positive achievement in mathematics and science education and learning in students within the District of Columbia.

The Laborers-AGC Construction Skills Training Program. Final Performance Report.

ERIC Educational Resources Information Center

Tippie, John L.; Rice, Eric

Patterned after a previously successful Laborers-Associated General Contractors model named the Construction Skills Training Program, a demonstration project was implemented at five regional training centers. At least eight courses were created, combined, or revised. Four full-length audiovisual support pieces were completed. Three courses were…

Creating and Using Video Segments for Rural Teacher Education.

ERIC Educational Resources Information Center

Ludlow, Barbara L.; Duff, Michael C.

This paper provides guidelines for using video presentations in teacher education programs in special education. The simplest use of video is to provide students with illustrations of basic concepts, demonstrations of specific skills, or examples of model programs and practices. Video can also deliver contextually rich case studies to stimulate…

Blade loss transient dynamics analysis. Volume 3: User's manual for TETRA program

NASA Technical Reports Server (NTRS)

Black, G. R.; Gallardo, V. C.; Storace, A. S.; Sagendorph, F.

1981-01-01

The users manual for TETRA contains program logic, flow charts, error messages, input sheets, modeling instructions, option descriptions, input variable descriptions, and demonstration problems. The process of obtaining a NASTRAN 17.5 generated modal input file for TETRA is also described with a worked sample.

Interdisciplinary Early Childhood Handicapped Personnel Training Project.

ERIC Educational Resources Information Center

Swartz, Stanley L.

The report describes the Western Illinois University 0-6 Interdisciplinary Early Childhood Handicapped Personnel Training Project (WIU 0-6 Project)--a model project designed to demonstrate innovative methods to fill personnel needs for early childhood handicapped programs. The project is a 2 semester program to train professional educators in the…

Leadership Practice in Elementary School Dual Language Programs: A Collective Case Study

ERIC Educational Resources Information Center

Monroy, Joanie K.

2012-01-01

Research in effective programming for English language learners has demonstrated the efficacy of dual language education as a model for closing persistent achievement gaps for this growing population of students. With goals of high academic achievement, linguistic proficiency in two languages, and cross-cultural proficiency, dual language…

Vocational Education's Role in Dropout Prevention. ERIC Digest.

ERIC Educational Resources Information Center

Imel, Susan

Appropriately implemented vocational education programs can help achieve National Education Goal 2--increasing the high school graduation rate to at least 90 percent. A 3-year study of dropout prevention in 10 demonstration sites has resulted in an enhanced vocational education program model described in "Vocational Education for the 21st…

Community Forums: A Boost for the Humanities.

ERIC Educational Resources Information Center

Eisenberg, Diane U.

Interest in the humanities is being revitalized at community and junior colleges through community forums and town meetings. The idea of melding the community forum with the humanities was at the heart of a national humanities demonstration program, in which 11 community colleges participated by developing model community forum programs based upon…

Accounting Cluster Demonstration Program at Aloha High School. Final Report.

ERIC Educational Resources Information Center

Beaverton School District 48, OR.

A model high school accounting cluster program was planned, developed, implemented, and evaluated in the Beaverton, Oregon, school district. The curriculum was developed with the help of representatives from the accounting occupations in the Portland metropolitan area. Through management interviews, identification of on-the job requirements, and…

Receptor Surface Models in the Classroom: Introducing Molecular Modeling to Students in a 3-D World

ERIC Educational Resources Information Center

Geldenhuys, Werner J.; Hayes, Michael; Van der Schyf, Cornelis J.; Allen, David D.; Malan, Sarel F.

2007-01-01

A simple, novel and generally applicable method to demonstrate structure-activity associations of a group of biologically interesting compounds in relation to receptor binding is described. This method is useful for undergraduates and graduate students in medicinal chemistry and computer modeling programs.

Integrated Modeling, Mapping, and Simulation (IMMS) framework for planning exercises.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friedman-Hill, Ernest J.; Plantenga, Todd D.

2010-06-01

The Integrated Modeling, Mapping, and Simulation (IMMS) program is designing and prototyping a simulation and collaboration environment for linking together existing and future modeling and simulation tools to enable analysts, emergency planners, and incident managers to more effectively, economically, and rapidly prepare, analyze, train, and respond to real or potential incidents. When complete, the IMMS program will demonstrate an integrated modeling and simulation capability that supports emergency managers and responders with (1) conducting 'what-if' analyses and exercises to address preparedness, analysis, training, operations, and lessons learned, and (2) effectively, economically, and rapidly verifying response tactics, plans and procedures.

Report of Baseline Data: Evaluation of the Child and Family Resource Program. Volume II.

ERIC Educational Resources Information Center

Affholter, Dennis; And Others

This volume reports the baseline (1978) data to be used in the 6-year longitudinal evaluation of the Child and Family Resource Program (CFRP). The CFRP, funded in 11 sites across the country as a Head Start demonstration program, is intended to develop models for providing services to low-income families with children from birth to eight years.…

Management Guide to a Competency-Based Adult Education Program for Administrators, Counselors, Teachers. 1984-1985.

ERIC Educational Resources Information Center

Brevard Community Coll., Cocoa, FL.

A 310 Special Demonstration Project was conducted in Florida to create a model of competency-based adult education (CBAE) based on the programs currently in existence. This manual, which was produced through the project, presents an overview of CBAE and explains in detail how to operate a CBAE program. The manual is organized in 11 sections. The…

Evaluation Report of the Fall River Middle School Research and Development Center Title VII Program, 1973-1974.

ERIC Educational Resources Information Center

Heuristics, Inc., Dedham, MA.

This report presents the evaluation of the 1973-1974 Fall River Middle School Research and Development Center, a project funded by ESEA Title VII as a model demonstration bilingual program beginning in 1972-1973. The evaluation focused on the assessment of the degree of accomplishment of product objectives for each component of the program. The…

Waste management under multiple complexities: inexact piecewise-linearization-based fuzzy flexible programming.

PubMed

Sun, Wei; Huang, Guo H; Lv, Ying; Li, Gongchen

2012-06-01

To tackle nonlinear economies-of-scale (EOS) effects in interval-parameter constraints for a representative waste management problem, an inexact piecewise-linearization-based fuzzy flexible programming (IPFP) model is developed. In IPFP, interval parameters for waste amounts and transportation/operation costs can be quantified; aspiration levels for net system costs, as well as tolerance intervals for both capacities of waste treatment facilities and waste generation rates can be reflected; and the nonlinear EOS effects transformed from objective function to constraints can be approximated. An interactive algorithm is proposed for solving the IPFP model, which in nature is an interval-parameter mixed-integer quadratically constrained programming model. To demonstrate the IPFP's advantages, two alternative models are developed to compare their performances. One is a conventional linear-regression-based inexact fuzzy programming model (IPFP2) and the other is an IPFP model with all right-hand-sides of fussy constraints being the corresponding interval numbers (IPFP3). The comparison results between IPFP and IPFP2 indicate that the optimized waste amounts would have the similar patterns in both models. However, when dealing with EOS effects in constraints, the IPFP2 may underestimate the net system costs while the IPFP can estimate the costs more accurately. The comparison results between IPFP and IPFP3 indicate that their solutions would be significantly different. The decreased system uncertainties in IPFP's solutions demonstrate its effectiveness for providing more satisfactory interval solutions than IPFP3. Following its first application to waste management, the IPFP can be potentially applied to other environmental problems under multiple complexities. Copyright © 2012 Elsevier Ltd. All rights reserved.

SAS macro programs for geographically weighted generalized linear modeling with spatial point data: applications to health research.

PubMed

Chen, Vivian Yi-Ju; Yang, Tse-Chuan

2012-08-01

An increasing interest in exploring spatial non-stationarity has generated several specialized analytic software programs; however, few of these programs can be integrated natively into a well-developed statistical environment such as SAS. We not only developed a set of SAS macro programs to fill this gap, but also expanded the geographically weighted generalized linear modeling (GWGLM) by integrating the strengths of SAS into the GWGLM framework. Three features distinguish our work. First, the macro programs of this study provide more kernel weighting functions than the existing programs. Second, with our codes the users are able to better specify the bandwidth selection process compared to the capabilities of existing programs. Third, the development of the macro programs is fully embedded in the SAS environment, providing great potential for future exploration of complicated spatially varying coefficient models in other disciplines. We provided three empirical examples to illustrate the use of the SAS macro programs and demonstrated the advantages explained above. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

A sample theory-based logic model to improve program development, implementation, and sustainability of Farm to School programs.

PubMed

Ratcliffe, Michelle M

2012-08-01

Farm to School programs hold promise to address childhood obesity. These programs may increase students’ access to healthier foods, increase students’ knowledge of and desire to eat these foods, and increase their consumption of them. Implementing Farm to School programs requires the involvement of multiple people, including nutrition services, educators, and food producers. Because these groups have not traditionally worked together and each has different goals, it is important to demonstrate how Farm to School programs that are designed to decrease childhood obesity may also address others’ objectives, such as academic achievement and economic development. A logic model is an effective tool to help articulate a shared vision for how Farm to School programs may work to accomplish multiple goals. Furthermore, there is evidence that programs based on theory are more likely to be effective at changing individuals’ behaviors. Logic models based on theory may help to explain how a program works, aid in efficient and sustained implementation, and support the development of a coherent evaluation plan. This article presents a sample theory-based logic model for Farm to School programs. The presented logic model is informed by the polytheoretical model for food and garden-based education in school settings (PMFGBE). The logic model has been applied to multiple settings, including Farm to School program development and evaluation in urban and rural school districts. This article also includes a brief discussion on the development of the PMFGBE, a detailed explanation of how Farm to School programs may enhance the curricular, physical, and social learning environments of schools, and suggestions for the applicability of the logic model for practitioners, researchers, and policy makers.

Automatic Generation of OpenMP Directives and Its Application to Computational Fluid Dynamics Codes

NASA Technical Reports Server (NTRS)

Yan, Jerry; Jin, Haoqiang; Frumkin, Michael; Yan, Jerry (Technical Monitor)

2000-01-01

The shared-memory programming model is a very effective way to achieve parallelism on shared memory parallel computers. As great progress was made in hardware and software technologies, performance of parallel programs with compiler directives has demonstrated large improvement. The introduction of OpenMP directives, the industrial standard for shared-memory programming, has minimized the issue of portability. In this study, we have extended CAPTools, a computer-aided parallelization toolkit, to automatically generate OpenMP-based parallel programs with nominal user assistance. We outline techniques used in the implementation of the tool and discuss the application of this tool on the NAS Parallel Benchmarks and several computational fluid dynamics codes. This work demonstrates the great potential of using the tool to quickly port parallel programs and also achieve good performance that exceeds some of the commercial tools.

Estimating the net benefit of a specialized return-to-work program for workers on short-term disability related to a mental disorder: an example exploring investment in collaborative care.

PubMed

Dewa, Carolyn S; Hoch, Jeffrey S

2014-06-01

This article estimates the net benefit for a company incorporating a collaborative care model into its return-to-work program for workers on short-term disability related to a mental disorder. Employing a simple decision model, the net benefit and uncertainty were explored. The breakeven point occurs when the average short-term disability episode is reduced by at least 7 days. In addition, 85% of the time, benefits could outweigh costs. Model results and sensitivity analyses indicate that organizational benefits can be greater than the costs of incorporating a collaborative care model into a return-to-work program for workers on short-term disability related to a mental disorder. The results also demonstrate how the probability of a program's effectiveness and the magnitude of its effectiveness are key factors that determine whether the benefits of a program outweigh its costs.

Model for Characterizing and Creating Certificate Programs in Technology-Specific Areas,

DTIC Science & Technology

1996-05-01

the TOEFL for applicants whose first language is not English. • GRE general and subject test. • Demonstrated competency in <prerequisites for...least 2.75 • English competency as demonstrated by TOEFL • Competence in data structures • Introductory level course in software engineering Course

Alternative Youth Employment Strategies Project: Final Report.

ERIC Educational Resources Information Center

Sadd, Susan; And Others

The Alternative Youth Employment Strategies (AYES) Project began as one of the demonstration projects funded under the Youth Employment and Demonstration Project Act in 1980. The program, which features three training models, is targeted toward high-risk, disadvantaged youth, especially minority youths from urban areas who had prior involvement…

Utility of Emulation and Simulation Computer Modeling of Space Station Environmental Control and Life Support Systems

NASA Technical Reports Server (NTRS)

Yanosy, James L.

1988-01-01

Over the years, computer modeling has been used extensively in many disciplines to solve engineering problems. A set of computer program tools is proposed to assist the engineer in the various phases of the Space Station program from technology selection through flight operations. The development and application of emulation and simulation transient performance modeling tools for life support systems are examined. The results of the development and the demonstration of the utility of three computer models are presented. The first model is a detailed computer model (emulation) of a solid amine water desorbed (SAWD) CO2 removal subsystem combined with much less detailed models (simulations) of a cabin, crew, and heat exchangers. This model was used in parallel with the hardware design and test of this CO2 removal subsystem. The second model is a simulation of an air revitalization system combined with a wastewater processing system to demonstrate the capabilities to study subsystem integration. The third model is that of a Space Station total air revitalization system. The station configuration consists of a habitat module, a lab module, two crews, and four connecting nodes.

Improving Ambulatory Training in Internal Medicine: X + Y (or Why Not?).

PubMed

Ray, Alaka; Jones, Danielle; Palamara, Kerri; Overland, Maryann; Steinberg, Kenneth P

2016-12-01

The Accreditation Council for Graduate Medical Education (ACGME) requirement that internal medicine residents spend one-third of their training in an ambulatory setting has resulted in programmatic innovation across the country. The traditional weekly half-day clinic model has lost ground to the block or "X + Y" clinic model, which has gained in popularity for many reasons. Several disadvantages of the block model have been reported, however, and residency programs are caught between the threat of old and new challenges. We offer the perspectives of three large residency programs (University of Washington, Emory University, and Massachusetts General Hospital) that have successfully navigated scheduling challenges in our individual settings without implementing the block model. By sharing our innovative non-block models, we hope to demonstrate that programs can and should create the solution that fits their individual needs.

Pilot Study of Implementation of an Internet-Based Depression Prevention Intervention (CATCH-IT) for Adolescents in 12 US Primary Care Practices: Clinical and Management/Organizational Behavioral Perspectives

PubMed Central

Eisen, Jeffrey C.; Marko-Holguin, Monika; Fogel, Joshua; Cardenas, Alonso; Bahn, My; Bradford, Nathan; Fagan, Blake; Wiedmann, Peggy

2013-01-01

Objective: To explore the implementation of CATCH-IT (Competent Adulthood Transition with Cognitive-behavioral Humanistic and Interpersonal Training), an Internet-based depression intervention program in 12 primary care sites, occurring as part of a randomized clinical trial comparing 2 versions of the intervention (motivational interview + Internet program versus brief advice + Internet program) in 83 adolescents aged 14 to 21 years recruited from February 1, 2007, to November 31, 2007. Method: The CATCH-IT intervention model consists of primary care screening to assess risk, a primary care physician interview to encourage participation, and 14 online modules of Internet training to teach adolescents how to reduce behaviors that increase vulnerability to depressive disorders. Specifically, we evaluated this program from both a management/organizational behavioral perspective (provider attitudes and demonstrated competence) and a clinical outcomes perspective (depressed mood scores) using the RE-AIM model (Reach, Efficacy, Adoption, Implementation, and Maintenance of the intervention). Results: While results varied by clinic, overall, clinics demonstrated satisfactory reach, efficacy, adoption, implementation, and maintenance of the CATCH-IT depression prevention program. Measures of program implementation and management predicted clinical outcomes at practices in exploratory analyses. Conclusion: Multidisciplinary approaches may be essential to evaluating the impact of complex interventions to prevent depression in community settings. Primary care physicians and nurses can use Internet-based programs to create a feasible and cost-effective model for the prevention of mental disorders in adolescents in primary care settings. Trial Registration: ClinicalTrials.gov identifiers: NCT00152529 and NCT00145912 PMID:24800110

Pilot Study of Implementation of an Internet-Based Depression Prevention Intervention (CATCH-IT) for Adolescents in 12 US Primary Care Practices: Clinical and Management/Organizational Behavioral Perspectives.

PubMed

Eisen, Jeffrey C; Marko-Holguin, Monika; Fogel, Joshua; Cardenas, Alonso; Bahn, My; Bradford, Nathan; Fagan, Blake; Wiedmann, Peggy; Van Voorhees, Benjamin W

2013-01-01

To explore the implementation of CATCH-IT (Competent Adulthood Transition with Cognitive-behavioral Humanistic and Interpersonal Training), an Internet-based depression intervention program in 12 primary care sites, occurring as part of a randomized clinical trial comparing 2 versions of the intervention (motivational interview + Internet program versus brief advice + Internet program) in 83 adolescents aged 14 to 21 years recruited from February 1, 2007, to November 31, 2007. The CATCH-IT intervention model consists of primary care screening to assess risk, a primary care physician interview to encourage participation, and 14 online modules of Internet training to teach adolescents how to reduce behaviors that increase vulnerability to depressive disorders. Specifically, we evaluated this program from both a management/organizational behavioral perspective (provider attitudes and demonstrated competence) and a clinical outcomes perspective (depressed mood scores) using the RE-AIM model (Reach, Efficacy, Adoption, Implementation, and Maintenance of the intervention). While results varied by clinic, overall, clinics demonstrated satisfactory reach, efficacy, adoption, implementation, and maintenance of the CATCH-IT depression prevention program. Measures of program implementation and management predicted clinical outcomes at practices in exploratory analyses. Multidisciplinary approaches may be essential to evaluating the impact of complex interventions to prevent depression in community settings. Primary care physicians and nurses can use Internet-based programs to create a feasible and cost-effective model for the prevention of mental disorders in adolescents in primary care settings. ClinicalTrials.gov identifiers: NCT00152529 and NCT00145912.

Impact of early treatment programs on HIV epidemics: An immunity-based mathematical model.

PubMed

Rahman, S M Ashrafur; Vaidya, Naveen K; Zou, Xingfu

2016-10-01

While studies on pre-exposure prophylaxis (PrEP) and post-exposure prophylaxis (PEP) have demonstrated substantial advantages in controlling HIV transmission, the overall benefits of the programs with early initiation of antiretroviral therapy (ART) have not been fully understood and are still on debate. Here, we develop an immunity-based (CD4+ T cell count based) mathematical model to study the impacts of early treatment programs on HIV epidemics and the overall community-level immunity. The model is parametrized using the HIV prevalence data from South Africa and fully analyzed for stability of equilibria and infection persistence criteria. Using our model, we evaluate the effects of early treatment on the new infection transmission, disease death, basic reproduction number, HIV prevalence, and the community-level immunity. Our model predicts that the programs with early treatments significantly reduce the new infection transmission and increase the community-level immunity, but the treatments alone may not be enough to eliminate HIV epidemics. These findings, including the community-level immunity, might provide helpful information for proper implementation of HIV treatment programs. Copyright © 2016 Elsevier Inc. All rights reserved.

Preventing alcohol and drug exposed births in Washington state: intervention findings from three parent-child assistance program sites.

PubMed

Grant, Therese M; Ernst, Cara C; Streissguth, Ann; Stark, Kenneth

2005-01-01

Home visitation interventions show promise for helping at-risk mothers, yet few programs have been developed and evaluated specifically for alcohol and drug-abusing pregnant women. This study examines outcomes among 216 women enrolled in the Washington State Parent-Child Assistance Program, a three-year intervention program for women who abuse alcohol and drugs during an index pregnancy. Pretest-posttest comparison was made across three sites: the original demonstration (1991-1995), and the Seattle and Tacoma replications (1996-2003). In the original demonstration, the client group performed significantly better than controls. Compared to the original demonstration, outcomes at replication sites were maintained (for regular use of contraception and use of reliable method; and number of subsequent deliveries), or improved (for alcohol/drug treatment completed; alcohol/ drug abstinence; subsequent delivery unexposed to alcohol/drugs). Improved outcomes at replication sites are not attributable to enrolling lower-risk women. Public policies and programs initiated over the study period may have had a positive effect on outcomes. Study findings suggest that this community-based intervention model is effective over time and across venues.

Project Developmental Continuity Evaluation: Final Report. Volume II: The Process of Program Implementation in PDC.

ERIC Educational Resources Information Center

Wacker, Sally; And Others

The second of two volumes, this document continues the final evaluation report of Project Developmental Continuity (PDC), a Head Start demonstration project initiated in 1974 to develop program models which enhance children's social competence by fostering developmental continuity from preschool through the early elementary grades. In particular,…

The Monterey Model for Micro Business Special Education

ERIC Educational Resources Information Center

Moberg, Eric M.

2009-01-01

The following program description, literature review, and theoretical bases demonstrate the andragogical soundness of the two projects and a club of the Monterey Adult Transitions Program. The Bistro Project began as a suggestion of an Associate Superintendent, who ran a similar project in the Boston area. The Greenhouse Project began as a…

B-WEST Regional Workforce Training Center. Building Workers Entering Skilled Trades. Final Report.

ERIC Educational Resources Information Center

Portland Community Coll., OR.

The B-WEST (Building Workers Entering Skilled Trades) project was an 18-month demonstration project at a campus of Portland Community College (Oregon). During the B-WEST project, the following programs/components were developed: (1) a model building construction (electrical, mechanical, construction) trades program for unemployed and underemployed…

Toyota/Skyline Technical Education Network. Cooperative Demonstration Program. Final Performance Report.

ERIC Educational Resources Information Center

Skyline Coll., San Bruno, CA.

A joint project was conducted between Toyota Motor Sales and Skyline College (in the San Francisco, California, area) to create an automotive technician training program that would serve the needs of working adults. During the project, a model high technology curriculum suitable for adults was developed, the quality of instruction available for…

Flow Model Study for Section 227 Demonstration Project in Allegan County, Michigan. National Shoreline Erosion Control Development and Demonstration Program

DTIC Science & Technology

2007-09-01

is necessary to convert the solids to a 3-D computational mesh. The user must decide how many layers of mesh elements are required for each material ...together to define the geology gives the user more control over the material contacts. Secondly, the tool to convert directly to a 3-D mesh from the...included in the model. Rocks, cracks , fissures, and plant material can affect the flow character- istics, but cannot be included in a model on this scale

Manned space station environmental control and life support system computer-aided technology assessment program

NASA Technical Reports Server (NTRS)

Hall, J. B., Jr.; Pickett, S. J.; Sage, K. H.

1984-01-01

A computer program for assessing manned space station environmental control and life support systems technology is described. The methodology, mission model parameters, evaluation criteria, and data base for 17 candidate technologies for providing metabolic oxygen and water to the crew are discussed. Examples are presented which demonstrate the capability of the program to evaluate candidate technology options for evolving space station requirements.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brigantic, Robert T.; Papatyi, Anthony F.; Perkins, Casey J.

This report summarizes a study and corresponding model development conducted in support of the United States Pacific Command (USPACOM) as part of the Federal Energy Management Program (FEMP) American Reinvestment and Recovery Act (ARRA). This research was aimed at developing a mathematical programming framework and accompanying optimization methodology in order to simultaneously evaluate energy efficiency (EE) and renewable energy (RE) opportunities. Once developed, this research then demonstrated this methodology at a USPACOM installation - Camp H.M. Smith, Hawaii. We believe this is the first time such an integrated, joint EE and RE optimization methodology has been constructed and demonstrated.

CSC attains VPP Star Demonstration status

NASA Image and Video Library

2009-12-09

CSC Inc. at NASA's John C. Space Center was presented a Voluntary Protection Programs (VPP) Star Demonstration banner by the Occupational Safety and Health administration (OSHA) during a Dec. 9 ceremony. From left, CSC Employee Safety Committee members LaSonya Pulliam (l to r), Jim Sever, Stacy Brunson, Debbie Duke, Sheliah Wilson, Fred Voss and Beth Nguyen, and CSC Program Manager Tony Lisotta received the banner. OSHA established VPP in 1982 as a proactive safety management model so organizations and their employees could be recognized for excellence in safety and health.

Exploring magnetized liner inertial fusion with a semi-analytic model

DOE PAGES

McBride, Ryan D.; Slutz, Stephen A.; Vesey, Roger A.; ...

2016-01-01

In this study, we explore magnetized liner inertial fusion (MagLIF) [S. A. Slutz et al., Phys. Plasmas 17, 056303 (2010)] using a semi-analytic model [R. D. McBride and S. A. Slutz, Phys. Plasmas 22, 052708 (2015)]. Specifically, we present simulation results from this model that: (a) illustrate the parameter space, energetics, and overall system efficiencies of MagLIF; (b) demonstrate the dependence of radiative loss rates on the radial fraction of the fuel that is preheated; (c) explore some of the recent experimental results of the MagLIF program at Sandia National Laboratories [M. R. Gomez et al., Phys. Rev. Lett. 113,more » 155003 (2014)]; (d) highlight the experimental challenges presently facing the MagLIF program; and (e) demonstrate how increases to the preheat energy, fuel density, axial magnetic field, and drive current could affect future MagLIF performance.« less

Exploring magnetized liner inertial fusion with a semi-analytic model

DOE Office of Scientific and Technical Information (OSTI.GOV)

McBride, R. D.; Slutz, S. A.; Vesey, R. A.

In this paper, we explore magnetized liner inertial fusion (MagLIF) [S. A. Slutz et al., Phys. Plasmas 17, 056303 (2010)] using a semi-analytic model [R. D. McBride and S. A. Slutz, Phys. Plasmas 22, 052708 (2015)]. Specifically, we present simulation results from this model that: (a) illustrate the parameter space, energetics, and overall system efficiencies of MagLIF; (b) demonstrate the dependence of radiative loss rates on the radial fraction of the fuel that is preheated; (c) explore some of the recent experimental results of the MagLIF program at Sandia National Laboratories [M. R. Gomez et al., Phys. Rev. Lett. 113,more » 155003 (2014)]; (d) highlight the experimental challenges presently facing the MagLIF program; and (e) demonstrate how increases to the preheat energy, fuel density, axial magnetic field, and drive current could affect future MagLIF performance.« less

Exploring magnetized liner inertial fusion with a semi-analytic model

DOE Office of Scientific and Technical Information (OSTI.GOV)

McBride, Ryan D.; Slutz, Stephen A.; Vesey, Roger A.

In this study, we explore magnetized liner inertial fusion (MagLIF) [S. A. Slutz et al., Phys. Plasmas 17, 056303 (2010)] using a semi-analytic model [R. D. McBride and S. A. Slutz, Phys. Plasmas 22, 052708 (2015)]. Specifically, we present simulation results from this model that: (a) illustrate the parameter space, energetics, and overall system efficiencies of MagLIF; (b) demonstrate the dependence of radiative loss rates on the radial fraction of the fuel that is preheated; (c) explore some of the recent experimental results of the MagLIF program at Sandia National Laboratories [M. R. Gomez et al., Phys. Rev. Lett. 113,more » 155003 (2014)]; (d) highlight the experimental challenges presently facing the MagLIF program; and (e) demonstrate how increases to the preheat energy, fuel density, axial magnetic field, and drive current could affect future MagLIF performance.« less

Bringing the Flipped Classroom to Day 1: A Novel Didactic Curriculum for Emergency Medicine Intern Orientation

PubMed Central

Barrie, Michael G.; Amick, Christopher; Mitzman, Jennifer; Way, David P.; King, Andrew M.

2018-01-01

Most emergency medicine (EM) residency programs provide an orientation program for their incoming interns, with the lecture being the most common education activity during this period. Our orientation program is designed to bridge the gap between undergraduate and graduate medical education by ensuring that all learners demonstrate competency on Level 1 Milestones, including medical knowledge (MK). To teach interns core medical knowledge in EM, we reformulated orientation using the flipped-classroom model by replacing lectures with small group, case-based discussions. Interns demonstrated improvement in medical knowledge through higher scores on a posttest. Evaluation survey results were also favorable for the flipped-classroom teaching format. PMID:29383072

Bringing the Flipped Classroom to Day 1: A Novel Didactic Curriculum for Emergency Medicine Intern Orientation.

PubMed

Barrie, Michael G; Amick, Christopher; Mitzman, Jennifer; Way, David P; King, Andrew M

2018-01-01

Most emergency medicine (EM) residency programs provide an orientation program for their incoming interns, with the lecture being the most common education activity during this period. Our orientation program is designed to bridge the gap between undergraduate and graduate medical education by ensuring that all learners demonstrate competency on Level 1 Milestones, including medical knowledge (MK). To teach interns core medical knowledge in EM, we reformulated orientation using the flipped-classroom model by replacing lectures with small group, case-based discussions. Interns demonstrated improvement in medical knowledge through higher scores on a posttest. Evaluation survey results were also favorable for the flipped-classroom teaching format.

Use of computer programs STLK1 and STWT1 for analysis of stream-aquifer hydraulic interaction

USGS Publications Warehouse

Desimone, Leslie A.; Barlow, Paul M.

1999-01-01

Quantifying the hydraulic interaction of aquifers and streams is important in the analysis of stream base fow, flood-wave effects, and contaminant transport between surface- and ground-water systems. This report describes the use of two computer programs, STLK1 and STWT1, to analyze the hydraulic interaction of streams with confined, leaky, and water-table aquifers during periods of stream-stage fuctuations and uniform, areal recharge. The computer programs are based on analytical solutions to the ground-water-flow equation in stream-aquifer settings and calculate ground-water levels, seepage rates across the stream-aquifer boundary, and bank storage that result from arbitrarily varying stream stage or recharge. Analysis of idealized, hypothetical stream-aquifer systems is used to show how aquifer type, aquifer boundaries, and aquifer and streambank hydraulic properties affect aquifer response to stresses. Published data from alluvial and stratifed-drift aquifers in Kentucky, Massachusetts, and Iowa are used to demonstrate application of the programs to field settings. Analytical models of these three stream-aquifer systems are developed on the basis of available hydrogeologic information. Stream-stage fluctuations and recharge are applied to the systems as hydraulic stresses. The models are calibrated by matching ground-water levels calculated with computer program STLK1 or STWT1 to measured ground-water levels. The analytical models are used to estimate hydraulic properties of the aquifer, aquitard, and streambank; to evaluate hydrologic conditions in the aquifer; and to estimate seepage rates and bank-storage volumes resulting from flood waves and recharge. Analysis of field examples demonstrates the accuracy and limitations of the analytical solutions and programs when applied to actual ground-water systems and the potential uses of the analytical methods as alternatives to numerical modeling for quantifying stream-aquifer interactions.

Analysis of Parallel Algorithms on SMP Node and Cluster of Workstations Using Parallel Programming Models with New Tile-based Method for Large Biological Datasets.

PubMed

Shrimankar, D D; Sathe, S R

2016-01-01

Sequence alignment is an important tool for describing the relationships between DNA sequences. Many sequence alignment algorithms exist, differing in efficiency, in their models of the sequences, and in the relationship between sequences. The focus of this study is to obtain an optimal alignment between two sequences of biological data, particularly DNA sequences. The algorithm is discussed with particular emphasis on time, speedup, and efficiency optimizations. Parallel programming presents a number of critical challenges to application developers. Today's supercomputer often consists of clusters of SMP nodes. Programming paradigms such as OpenMP and MPI are used to write parallel codes for such architectures. However, the OpenMP programs cannot be scaled for more than a single SMP node. However, programs written in MPI can have more than single SMP nodes. But such a programming paradigm has an overhead of internode communication. In this work, we explore the tradeoffs between using OpenMP and MPI. We demonstrate that the communication overhead incurs significantly even in OpenMP loop execution and increases with the number of cores participating. We also demonstrate a communication model to approximate the overhead from communication in OpenMP loops. Our results are astonishing and interesting to a large variety of input data files. We have developed our own load balancing and cache optimization technique for message passing model. Our experimental results show that our own developed techniques give optimum performance of our parallel algorithm for various sizes of input parameter, such as sequence size and tile size, on a wide variety of multicore architectures.

Analysis of Parallel Algorithms on SMP Node and Cluster of Workstations Using Parallel Programming Models with New Tile-based Method for Large Biological Datasets

PubMed Central

Shrimankar, D. D.; Sathe, S. R.

2016-01-01

Sequence alignment is an important tool for describing the relationships between DNA sequences. Many sequence alignment algorithms exist, differing in efficiency, in their models of the sequences, and in the relationship between sequences. The focus of this study is to obtain an optimal alignment between two sequences of biological data, particularly DNA sequences. The algorithm is discussed with particular emphasis on time, speedup, and efficiency optimizations. Parallel programming presents a number of critical challenges to application developers. Today’s supercomputer often consists of clusters of SMP nodes. Programming paradigms such as OpenMP and MPI are used to write parallel codes for such architectures. However, the OpenMP programs cannot be scaled for more than a single SMP node. However, programs written in MPI can have more than single SMP nodes. But such a programming paradigm has an overhead of internode communication. In this work, we explore the tradeoffs between using OpenMP and MPI. We demonstrate that the communication overhead incurs significantly even in OpenMP loop execution and increases with the number of cores participating. We also demonstrate a communication model to approximate the overhead from communication in OpenMP loops. Our results are astonishing and interesting to a large variety of input data files. We have developed our own load balancing and cache optimization technique for message passing model. Our experimental results show that our own developed techniques give optimum performance of our parallel algorithm for various sizes of input parameter, such as sequence size and tile size, on a wide variety of multicore architectures. PMID:27932868

Thermal Modeling in Support of the Edison Demonstration of Smallsat Networks Project

NASA Technical Reports Server (NTRS)

Coker, Robert

2013-01-01

NASA's Edison program is intending to launch a swarm of at least 8 small satellites in 2013. This swarm of 1.5U Cubesats, the Edison Demonstration of Smallsat Networks (EDSN) project, will demonstrate intra-swarm communications and multi-point in-situ space physics data acquisition. In support of the design and testing of the EDSN satellites, a geometrically accurate thermal model has been constructed. Due to the low duty cycle of most components, no significant overheating issues were found. The predicted mininum temperatures of the external antennas are low enough, however, that some mitigation may be in order. The development and application of the model will be discussed in detail.

Composite structural armor for combat vehicle applications

NASA Technical Reports Server (NTRS)

Haskell, William E., III; Alesi, A. L.; Parsons, G. R.

1990-01-01

Several projects that have demonstrated the advantages of using thick composite armor technology for structural applications in armored combat vehicles are discussed. The first involved composite cargo doors for the Marine Corps LVTP-7 amphibious landing vehicle. Another was a demonstration composite turret that offered a weight reduction of 15.5 percent. The advantages of this composite armor compared to metallic armors used for combat vehicle hull and turret applications are reduced weight at equal ballistic protection; reduced back armor spall; excellent corrosion resistance; reduced production costs by parts consolidation; and inherent thermal and acoustic insulative properties. Based on the encouraging results of these past programs, the Demonstration Composite Hull Program was started in September 1986. To demonstrate this composite armor technology, the Army's newest infantry fighting vehicle, the Bradley Fighting Vehicle (BFV), was selected as a model. A composite infantry fighting vehicle, designated the CIFV for this program, has been designed and fabricated and is currently undergoing a 6000 mile field endurance test. The CIFV demonstration vehicle uses the BFV engine, transmission, suspension, track and other equipment.

A Measure for Evaluating the Effectiveness of Teen Pregnancy Prevention Programs.

ERIC Educational Resources Information Center

Somers, Cheryl L.; Johnson, Stephanie A.; Sawilowksy, Shlomo S.

2002-01-01

The Teen Attitude Pregnancy Scale (TAPS) was developed to measure teen attitudes and intentions regarding teenage pregnancy. The model demonstrated good internal consistency and concurrent validity for the samples in this study. Analysis revealed evidence of validity for this model. (JDM)

Model Of Neural Network With Creative Dynamics

NASA Technical Reports Server (NTRS)

Zak, Michail; Barhen, Jacob

1993-01-01

Paper presents analysis of mathematical model of one-neuron/one-synapse neural network featuring coupled activation and learning dynamics and parametrical periodic excitation. Demonstrates self-programming, partly random behavior of suitable designed neural network; believed to be related to spontaneity and creativity of biological neural networks.

Program test objectives milestone 3. [Integrated Propulsion Technology Demonstrator

NASA Technical Reports Server (NTRS)

Gaynor, T. L.

1994-01-01

The following conclusions have been developed relative to propulsion system technology adequacy for efficient development and operation of recoverable and expendable launch vehicles (RLV and ELV) and the benefits which the integrated propulsion technology demonstrator will provide for enhancing technology: (1) Technology improvements relative to propulsion system design and operation can reduce program cost. Many features or improvement needs to enhance operability, reduce cost, and improve payload are identified. (2) The Integrated Propulsion Technology Demonstrator (IPTD) Program provides a means of resolving the majority of issues associated with improvement needs. (3) The IPTD will evaluate complex integration of vehicle and facility functions in fluid management and propulsion control systems, and provides an environment for validating improved mechanical and electrical components. (4) The IPTD provides a mechanism for investigating operational issues focusing on reducing manpower and time to perform various functions at the launch site. These efforts include model development, collection of data to validate subject models, and ultimate development of complex time line models. (5) The IPTD provides an engine test bed for tri/bi-propellant engine development firings which is representative of the actual vehicle environment. (6) The IPTD provides for only a limited multiengine configuration integration environment for RLV. Multiengine efforts may be simulated for a number of subsystems and a number of subsystems are relatively independent of the multiengine influences.

An information maximization model of eye movements

NASA Technical Reports Server (NTRS)

Renninger, Laura Walker; Coughlan, James; Verghese, Preeti; Malik, Jitendra

2005-01-01

We propose a sequential information maximization model as a general strategy for programming eye movements. The model reconstructs high-resolution visual information from a sequence of fixations, taking into account the fall-off in resolution from the fovea to the periphery. From this framework we get a simple rule for predicting fixation sequences: after each fixation, fixate next at the location that minimizes uncertainty (maximizes information) about the stimulus. By comparing our model performance to human eye movement data and to predictions from a saliency and random model, we demonstrate that our model is best at predicting fixation locations. Modeling additional biological constraints will improve the prediction of fixation sequences. Our results suggest that information maximization is a useful principle for programming eye movements.

Thermal Modeling and Testing of the Edison Demonstration of Smallsat Networks Project

NASA Technical Reports Server (NTRS)

Coker, Robert

2014-01-01

NASA's Edison program is intending to launch the Edison Demonstration of Smallsat Networks (EDSN) project, a swarm of 8 1.5U cubesats in the fall of 2014 to demonstrate intra-swarm communications and multi-point in situ space physics data acquisition. Due to late changes in the duty cycles of various components, potential overheating issues appeared. In addition, it was determined that capacity loss due to the coldness of the batteries was unacceptable, so mitigation was required. This paper will discuss the thermal modeling, testing, and results of the EDSN mission.

Model-based optimal design of experiments - semidefinite and nonlinear programming formulations

PubMed Central

Duarte, Belmiro P.M.; Wong, Weng Kee; Oliveira, Nuno M.C.

2015-01-01

We use mathematical programming tools, such as Semidefinite Programming (SDP) and Nonlinear Programming (NLP)-based formulations to find optimal designs for models used in chemistry and chemical engineering. In particular, we employ local design-based setups in linear models and a Bayesian setup in nonlinear models to find optimal designs. In the latter case, Gaussian Quadrature Formulas (GQFs) are used to evaluate the optimality criterion averaged over the prior distribution for the model parameters. Mathematical programming techniques are then applied to solve the optimization problems. Because such methods require the design space be discretized, we also evaluate the impact of the discretization scheme on the generated design. We demonstrate the techniques for finding D–, A– and E–optimal designs using design problems in biochemical engineering and show the method can also be directly applied to tackle additional issues, such as heteroscedasticity in the model. Our results show that the NLP formulation produces highly efficient D–optimal designs but is computationally less efficient than that required for the SDP formulation. The efficiencies of the generated designs from the two methods are generally very close and so we recommend the SDP formulation in practice. PMID:26949279

Model-based optimal design of experiments - semidefinite and nonlinear programming formulations.

PubMed

Duarte, Belmiro P M; Wong, Weng Kee; Oliveira, Nuno M C

2016-02-15

We use mathematical programming tools, such as Semidefinite Programming (SDP) and Nonlinear Programming (NLP)-based formulations to find optimal designs for models used in chemistry and chemical engineering. In particular, we employ local design-based setups in linear models and a Bayesian setup in nonlinear models to find optimal designs. In the latter case, Gaussian Quadrature Formulas (GQFs) are used to evaluate the optimality criterion averaged over the prior distribution for the model parameters. Mathematical programming techniques are then applied to solve the optimization problems. Because such methods require the design space be discretized, we also evaluate the impact of the discretization scheme on the generated design. We demonstrate the techniques for finding D -, A - and E -optimal designs using design problems in biochemical engineering and show the method can also be directly applied to tackle additional issues, such as heteroscedasticity in the model. Our results show that the NLP formulation produces highly efficient D -optimal designs but is computationally less efficient than that required for the SDP formulation. The efficiencies of the generated designs from the two methods are generally very close and so we recommend the SDP formulation in practice.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Xiaohu; Shi, Di; Wang, Zhiwei

Shunt FACTS devices, such as, a Static Var Compensator (SVC), are capable of providing local reactive power compensation. They are widely used in the network to reduce the real power loss and improve the voltage profile. This paper proposes a planning model based on mixed integer conic programming (MICP) to optimally allocate SVCs in the transmission network considering load uncertainty. The load uncertainties are represented by a number of scenarios. Reformulation and linearization techniques are utilized to transform the original non-convex model into a convex second order cone programming (SOCP) model. Numerical case studies based on the IEEE 30-bus systemmore » demonstrate the effectiveness of the proposed planning model.« less

Descriptive Model of Generic WAMS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hauer, John F.; DeSteese, John G.

The Department of Energy’s (DOE) Transmission Reliability Program is supporting the research, deployment, and demonstration of various wide area measurement system (WAMS) technologies to enhance the reliability of the Nation’s electrical power grid. Pacific Northwest National Laboratory (PNNL) was tasked by the DOE National SCADA Test Bed Program to conduct a study of WAMS security. This report represents achievement of the milestone to develop a generic WAMS model description that will provide a basis for the security analysis planned in the next phase of this study.

Automated eukaryotic gene structure annotation using EVidenceModeler and the Program to Assemble Spliced Alignments

PubMed Central

Haas, Brian J; Salzberg, Steven L; Zhu, Wei; Pertea, Mihaela; Allen, Jonathan E; Orvis, Joshua; White, Owen; Buell, C Robin; Wortman, Jennifer R

2008-01-01

EVidenceModeler (EVM) is presented as an automated eukaryotic gene structure annotation tool that reports eukaryotic gene structures as a weighted consensus of all available evidence. EVM, when combined with the Program to Assemble Spliced Alignments (PASA), yields a comprehensive, configurable annotation system that predicts protein-coding genes and alternatively spliced isoforms. Our experiments on both rice and human genome sequences demonstrate that EVM produces automated gene structure annotation approaching the quality of manual curation. PMID:18190707

GPU COMPUTING FOR PARTICLE TRACKING

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nishimura, Hiroshi; Song, Kai; Muriki, Krishna

2011-03-25

This is a feasibility study of using a modern Graphics Processing Unit (GPU) to parallelize the accelerator particle tracking code. To demonstrate the massive parallelization features provided by GPU computing, a simplified TracyGPU program is developed for dynamic aperture calculation. Performances, issues, and challenges from introducing GPU are also discussed. General purpose Computation on Graphics Processing Units (GPGPU) bring massive parallel computing capabilities to numerical calculation. However, the unique architecture of GPU requires a comprehensive understanding of the hardware and programming model to be able to well optimize existing applications. In the field of accelerator physics, the dynamic aperture calculationmore » of a storage ring, which is often the most time consuming part of the accelerator modeling and simulation, can benefit from GPU due to its embarrassingly parallel feature, which fits well with the GPU programming model. In this paper, we use the Tesla C2050 GPU which consists of 14 multi-processois (MP) with 32 cores on each MP, therefore a total of 448 cores, to host thousands ot threads dynamically. Thread is a logical execution unit of the program on GPU. In the GPU programming model, threads are grouped into a collection of blocks Within each block, multiple threads share the same code, and up to 48 KB of shared memory. Multiple thread blocks form a grid, which is executed as a GPU kernel. A simplified code that is a subset of Tracy++ [2] is developed to demonstrate the possibility of using GPU to speed up the dynamic aperture calculation by having each thread track a particle.« less

78 FR 67090 - Approval and Promulgation of Implementation Plans; Florida: Non-interference Demonstration for...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-11-08

... disease. The most common measure of fuel volatility that is useful in evaluating gasoline evaporative... maintenance demonstration compared the 2002 baseline emissions inventory to the 2018 projected emissions... for model year 2014 and 2018, and did not include inspection and maintenance programs in any of the...

The Miami-Dade Juvenile Assessment Center National Demonstration Project

ERIC Educational Resources Information Center

Walters, Wansley; Dembo, Richard; Beaulaurier, Richard; Cocozza, Joseph; De La Rosa, Mario; Poythress, Norman; Skowyra, Kathy; Veysey, Bonita M.

2005-01-01

The Miami-Dade Juvenile Assessment Center National Demonstration Project (NDP) is serving as a national model for the transformation of front end services in the juvenile justice system in a unique sociocultural setting.We discuss the background and vision of the NDP, its implementation and accomplishments in six major program areas: (1)…

An Optimization Model for the Selection of Bus-Only Lanes in a City.

PubMed

Chen, Qun

2015-01-01

The planning of urban bus-only lane networks is an important measure to improve bus service and bus priority. To determine the effective arrangement of bus-only lanes, a bi-level programming model for urban bus lane layout is developed in this study that considers accessibility and budget constraints. The goal of the upper-level model is to minimize the total travel time, and the lower-level model is a capacity-constrained traffic assignment model that describes the passenger flow assignment on bus lines, in which the priority sequence of the transfer times is reflected in the passengers' route-choice behaviors. Using the proposed bi-level programming model, optimal bus lines are selected from a set of candidate bus lines; thus, the corresponding bus lane network on which the selected bus lines run is determined. The solution method using a genetic algorithm in the bi-level programming model is developed, and two numerical examples are investigated to demonstrate the efficacy of the proposed model.

DEAN: A program for dynamic engine analysis

NASA Technical Reports Server (NTRS)

Sadler, G. G.; Melcher, K. J.

1985-01-01

The Dynamic Engine Analysis program, DEAN, is a FORTRAN code implemented on the IBM/370 mainframe at NASA Lewis Research Center for digital simulation of turbofan engine dynamics. DEAN is an interactive program which allows the user to simulate engine subsystems as well as a full engine systems with relative ease. The nonlinear first order ordinary differential equations which define the engine model may be solved by one of four integration schemes, a second order Runge-Kutta, a fourth order Runge-Kutta, an Adams Predictor-Corrector, or Gear's method for still systems. The numerical data generated by the model equations are displayed at specified intervals between which the user may choose to modify various parameters affecting the model equations and transient execution. Following the transient run, versatile graphics capabilities allow close examination of the data. DEAN's modeling procedure and capabilities are demonstrated by generating a model of simple compressor rig.

Policy Gradient Adaptive Dynamic Programming for Data-Based Optimal Control.

PubMed

Luo, Biao; Liu, Derong; Wu, Huai-Ning; Wang, Ding; Lewis, Frank L

2017-10-01

The model-free optimal control problem of general discrete-time nonlinear systems is considered in this paper, and a data-based policy gradient adaptive dynamic programming (PGADP) algorithm is developed to design an adaptive optimal controller method. By using offline and online data rather than the mathematical system model, the PGADP algorithm improves control policy with a gradient descent scheme. The convergence of the PGADP algorithm is proved by demonstrating that the constructed Q -function sequence converges to the optimal Q -function. Based on the PGADP algorithm, the adaptive control method is developed with an actor-critic structure and the method of weighted residuals. Its convergence properties are analyzed, where the approximate Q -function converges to its optimum. Computer simulation results demonstrate the effectiveness of the PGADP-based adaptive control method.

A TRAINING MODEL FOR THE JOBLESS ADULT.

ERIC Educational Resources Information Center

ULRICH, BERNARD

THE TRAINING SYSTEMS DESIGN, AN INTERDISCIPLINARY APPROACH UTILIZING KNOWLEDGE OF BEHAVIORAL SCIENCES, NEW INSTRUCTIONAL TECHNOLOGY, AND SYSTEMS DESIGN, HAS BEEN APPLIED TO DEVELOP A MODEL FOR RE-EDUCATING AND TRAINING THE AGING UNEMPLOYED. RESEARCH INTO EXISTING MDTA DEMONSTRATION PROGRAMS BY THE COOPERATIVE EFFORTS OF MCGRAW-HILL AND THE…

40 CFR 60.2725 - May I conduct a repeat performance test to establish new operating limits?

Code of Federal Regulations, 2014 CFR

2014-07-01

... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration Units Model... during any performance test used to demonstrate compliance. Model Rule—Monitoring ...

40 CFR 60.2725 - May I conduct a repeat performance test to establish new operating limits?

Code of Federal Regulations, 2013 CFR

2013-07-01

... PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF PERFORMANCE FOR NEW STATIONARY SOURCES Emissions Guidelines and Compliance Times for Commercial and Industrial Solid Waste Incineration Units Model... during any performance test used to demonstrate compliance. Model Rule—Monitoring ...

iVAR: a program for imputing missing data in multivariate time series using vector autoregressive models.

PubMed

Liu, Siwei; Molenaar, Peter C M

2014-12-01

This article introduces iVAR, an R program for imputing missing data in multivariate time series on the basis of vector autoregressive (VAR) models. We conducted a simulation study to compare iVAR with three methods for handling missing data: listwise deletion, imputation with sample means and variances, and multiple imputation ignoring time dependency. The results showed that iVAR produces better estimates for the cross-lagged coefficients than do the other three methods. We demonstrate the use of iVAR with an empirical example of time series electrodermal activity data and discuss the advantages and limitations of the program.

Student Gains in Self-Efficacy in an Advanced MSW Curriculum: A Customized Model for Outcomes Assessment

ERIC Educational Resources Information Center

Rishel, Carrie W.; Majewski, Virginia

2009-01-01

The new Educational Policy and Accreditation Standards (EPAS) identify assessment as "an integral component of competency-based education." It is not new, however, that programs must demonstrate plans to assess attainment of competencies or expected program outcomes and show how data collection and analysis inform curriculum decisions. Previous…

Money Management for Women: A Demonstration of the Role of Community Organizations in the Delivery of Consumer Education.

ERIC Educational Resources Information Center

Heller, Barbara R.; Florio, Carol

The Money Management for Women program was designed and implemented to provide lower-income women with financial planning information geared to their current level of understanding and financial circumstances. Objectives were to develop a model consumer education program and test the efficacy of community-based organizations as agents in…

Employee Assistance Program Cost Containment through the Utilization of Community-Based, Social Model Treatment Providers.

ERIC Educational Resources Information Center

de Miranda, John; Lampe, Marc

Statewide efforts by the California Department of Alcohol and Drug Programs to secure third-party payments for nonhospital alcoholism services gradually dissolved due to changes in political administration and overall priorities. San Mateo County, however, served as a demonstration county for the effort and has continued to explore third-party…

A House Staff Training Program to Improve the Clinical Instruction of Medical Students.

ERIC Educational Resources Information Center

Meleca, C. Benjamin; Schimpfhauser, Frank T.

A demonstrated model for effective instructional skill improvement in the medical clinical sciences is described. A two-year project was funded by the National Fund for Medical Education to design and implement a program to assist house staff in the improvement of clinical instruction. A total of 148 medical residents were surveyed about their…

The Teachers of Quality Academy: Evaluation of the Effectiveness and Impact of a Health Systems Science Training Program.

PubMed

Walsh, Danielle S; Lazorick, Suzanne; Lawson, Luan; Lake, Donna; Garrison, Herbert G; Higginson, Jason; Vos, Paul; Baxley, Elizabeth

2018-05-01

This project aimed to evaluate the effectiveness of a faculty development program in health systems science (HSS)-the Teachers of Quality Academy (TQA). Participants in TQA and a comparison group were evaluated before, during, and 1 year after the program using self-perception questionnaires, tests of HSS knowledge, and tracking of academic productivity and career advancement. Among program completers (n = 27), the mean self-assessed ratings of knowledge and skills of HSS topics immediately after the program, as compared to baseline, increased significantly compared to controls (n = 30). Participants demonstrated progressive improvement of self-perceived skills and attitudes, and retention of HSS knowledge, from baseline to completion of the program. Participants also demonstrated substantially higher HSS scholarly productivity, leadership, and career advancement compared to the comparison group. The TQA effectively created a faculty cadre able to role model, teach, and create a curriculum in HSS competencies for medical students, resident physicians, and other health professionals.

Visible ink: A flexible and individually tailored writing intervention for cancer patients

PubMed Central

CORNER, GEOFFREY W.; JHANWAR, SABRINA M.; KELMAN, JUDITH; PESSIN, HAYLEY; STEIN, EMMA; BREITBART, WILLIAM

2017-01-01

Objectives Subjective reports on the effectiveness of and satisfaction with writing interventions in medical populations have indicated that they can have a profound impact on patients. Further, past research on these programs has demonstrated that they can lead to a number of different positive outcomes depending on the personal characteristics of the participating patients and the type of writing with which they are tasked. For this reason, a flexible and individually tailored writing intervention may be particularly effective for patients, molding its approach to their desires and backgrounds. This paper examines Visible Ink, a writing program for cancer patients at Memorial Sloan-Kettering Cancer Center (MSKCC) that follows this model. Methods At Visible Ink’s First Fall Writing Festival in November 2012, an optional survey was provided to all program participants in attendance, capturing both quantitative and qualitative information on patient experiences in the program. Twenty-nine surveys were completed. Results The program appears to have a variety of positive effects, including fostering personal growth and providing a positive distraction. Respondents reported that they write in a number of different genres on topics both related and not related to their illnesses, which supports the flexible model of the program. All respondents indicated that they would recommend the program to others, and satisfaction with the program’s general approach (i.e., individualized work with a writing coach) was unanimous. A few areas for potential improvement were also identified, most of which involved expanding the services and events offered by the program. Significance of results Despite the limitations of this survey (e.g., small sample size and low response rate), its results support the promise of the Visible Ink model and demonstrate participants’ satisfaction with the program. Future research can more thoroughly examine Visible Ink’s effectiveness, and additional resources could enable the program to expand. PMID:24138800

Overview of ARPA low-cost ceramic composites (LC{sup 3}) program

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adler, P.N.

1996-12-31

Grumman is currently leading an approximate $10M ARPA cost-shared program aimed at developing low-cost fabrication methodology for manufacturing ceramic matrix composite (CMC) structural components. One of the program goals is to demonstrate the effectiveness of an advanced materials partnership. A vertically integrated collaboration now exists that combines the talents of three large private sector organizations, two smaller private sector organizations, three universities, and three federal government laboratories. Work in progress involves preceramic polymer (Blackglas{trademark}) CMC materials technology, RTM and pyrolysis process modeling & simulation, and utilization of low-cost approaches for fabricating a CMC demonstration engine seal component. This paper reviewsmore » the program organization, functioning, and some of the highlights of the technical work, which is of interest to the DoD as well as the commercial sector.« less

Effectiveness of a School-based Academic Asthma Health Education and Counseling Program on Fostering Acceptance of Asthma in Older School-age Students with Asthma

PubMed Central

Kintner, Eileen K.; Cook, Gwendolyn; Marti, C. Nathan; Gomes, Melissa; Meeder, Linda; Van Egeren, Laurie A.

2014-01-01

Purpose The purpose was to evaluate the effectiveness of the academic asthma education and counseling SHARP program on fostering psychosocial acceptance of asthma. Design and Methods This was a phase III, two-group, cluster randomized, single-blinded, longitudinal study. Students from grades 4 and 5 (N = 205) with asthma and their caregivers completed surveys at pre-intervention and at 1, 12, and 24 months post-intervention. Analysis involved multilevel modeling. Results All students demonstrated significant improvement in aspects of acceptance; students in SHARP demonstrated significant improvement in openness to sharing and connectedness with teachers over students in the control condition. Practice Implications The SHARP program offers a well-tested, effective program for psychosocial acceptance of asthma, which is welcomed by schools. PMID:25443593

Test and demonstration report on single and three phase 60 to 400 hz sleep inverter 3. 75kva Gulton model emir302

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rance, J.

1979-03-20

This Test and Demonstration Report presents the Test Plan and the results of the tests performed on SLEEP Inverter, Gulton Model EMIR302. The objective of the overall program is to design, develop, fabricate and test the 120V, 60 to 400Hz, 3.75KVA SLEEP Inverter in accordance with the requirements of U. S. Army Mobility Equipment Research and Development Command Specification EED 76 022501.

Solar Sail Roadmap Mission GN and C Challenges

NASA Technical Reports Server (NTRS)

Heaton, Andrew F.

2005-01-01

The NASA In-Space Propulsion program is funding development work for solar sails to enhance future scientific opportunities. Key to this effort are scientific solar sail roadmap missions identified by peer review. The two near-term missions of interest are L1 Diamond and Solar Polar Imager. Additionally, the New Millennium Program is sponsoring the Space Technology 9 (ST9) demonstration mission. Solar sails are one of five technologies competing for the ST9 flight demonstration. Two candidate solar sail missions have been identified for a potential ST9 flight. All the roadmap missions and candidate flight demonstration missions face various GN&C challenges. A variety of efforts are underway to address these challenges. These include control actuator design and testing, low thrust optimization studies, attitude control system design and modeling, control-structure interaction studies, trajectory control design, and solar radiation pressure model development. Here we survey the various efforts underway and identify a few of specific recent interest and focus.

Childhood Obesity Research Demonstration Project: Cross-Site Evaluation Methods

PubMed Central

Lee, Rebecca E.; Mehta, Paras; Thompson, Debbe; Bhargava, Alok; Carlson, Coleen; Kao, Dennis; Layne, Charles S.; Ledoux, Tracey; O'Connor, Teresia; Rifai, Hanadi; Gulley, Lauren; Hallett, Allen M.; Kudia, Ousswa; Joseph, Sitara; Modelska, Maria; Ortega, Dana; Parker, Nathan; Stevens, Andria

2015-01-01

Abstract Introduction: The Childhood Obesity Research Demonstration (CORD) project links public health and primary care interventions in three projects described in detail in accompanying articles in this issue of Childhood Obesity. This article describes a comprehensive evaluation plan to determine the extent to which the CORD model is associated with changes in behavior, body weight, BMI, quality of life, and healthcare satisfaction in children 2–12 years of age. Design/Methods: The CORD Evaluation Center (EC-CORD) will analyze the pooled data from three independent demonstration projects that each integrate public health and primary care childhood obesity interventions. An extensive set of common measures at the family, facility, and community levels were defined by consensus among the CORD projects and EC-CORD. Process evaluation will assess reach, dose delivered, and fidelity of intervention components. Impact evaluation will use a mixed linear models approach to account for heterogeneity among project-site populations and interventions. Sustainability evaluation will assess the potential for replicability, continuation of benefits beyond the funding period, institutionalization of the intervention activities, and community capacity to support ongoing program delivery. Finally, cost analyses will assess how much benefit can potentially be gained per dollar invested in programs based on the CORD model. Conclusions: The keys to combining and analyzing data across multiple projects include the CORD model framework and common measures for the behavioral and health outcomes along with important covariates at the individual, setting, and community levels. The overall objective of the comprehensive evaluation will develop evidence-based recommendations for replicating and disseminating community-wide, integrated public health and primary care programs based on the CORD model. PMID:25679060

Integrated modeling of advanced optical systems

NASA Astrophysics Data System (ADS)

Briggs, Hugh C.; Needels, Laura; Levine, B. Martin

1993-02-01

This poster session paper describes an integrated modeling and analysis capability being developed at JPL under funding provided by the JPL Director's Discretionary Fund and the JPL Control/Structure Interaction Program (CSI). The posters briefly summarize the program capabilities and illustrate them with an example problem. The computer programs developed under this effort will provide an unprecedented capability for integrated modeling and design of high performance optical spacecraft. The engineering disciplines supported include structural dynamics, controls, optics and thermodynamics. Such tools are needed in order to evaluate the end-to-end system performance of spacecraft such as OSI, POINTS, and SMMM. This paper illustrates the proof-of-concept tools that have been developed to establish the technology requirements and demonstrate the new features of integrated modeling and design. The current program also includes implementation of a prototype tool based upon the CAESY environment being developed under the NASA Guidance and Control Research and Technology Computational Controls Program. This prototype will be available late in FY-92. The development plan proposes a major software production effort to fabricate, deliver, support and maintain a national-class tool from FY-93 through FY-95.

Evidence for transgenerational metabolic programming in Drosophila

PubMed Central

Buescher, Jessica L.; Musselman, Laura P.; Wilson, Christina A.; Lang, Tieming; Keleher, Madeline; Baranski, Thomas J.; Duncan, Jennifer G.

2013-01-01

SUMMARY Worldwide epidemiologic studies have repeatedly demonstrated an association between prenatal nutritional environment, birth weight and susceptibility to adult diseases including obesity, cardiovascular disease and type 2 diabetes. Despite advances in mammalian model systems, the molecular mechanisms underlying this phenomenon are unclear, but might involve programming mechanisms such as epigenetics. Here we describe a new system for evaluating metabolic programming mechanisms using a simple, genetically tractable Drosophila model. We examined the effect of maternal caloric excess on offspring and found that a high-sugar maternal diet alters body composition of larval offspring for at least two generations, augments an obese-like phenotype under suboptimal (high-calorie) feeding conditions in adult offspring, and modifies expression of metabolic genes. Our data indicate that nutritional programming mechanisms could be highly conserved and support the use of Drosophila as a model for evaluating the underlying genetic and epigenetic contributions to this phenomenon. PMID:23649823

High-Lift Engine Aeroacoustics Technology (HEAT) Test Program Overview

NASA Technical Reports Server (NTRS)

Zuniga, Fanny A.; Smith, Brian E.

1999-01-01

The NASA High-Speed Research program developed the High-Lift Engine Aeroacoustics Technology (HEAT) program to demonstrate satisfactory interaction between the jet noise suppressor and high-lift system of a High-Speed Civil Transport (HSCT) configuration at takeoff, climb, approach and landing conditions. One scheme for reducing jet exhaust noise generated by an HSCT is the use of a mixer-ejector system which would entrain large quantities of ambient air into the nozzle exhaust flow through secondary inlets in order to cool and slow the jet exhaust before it exits the nozzle. The effectiveness of such a noise suppression device must be evaluated in the presence of an HSCT wing high-lift system before definitive assessments can be made concerning its acoustic performance. In addition, these noise suppressors must provide the required acoustic attenuation while not degrading the thrust efficiency of the propulsion system or the aerodynamic performance of the high-lift devices on the wing. Therefore, the main objective of the HEAT program is to demonstrate these technologies and understand their interactions on a large-scale HSCT model. The HEAT program is a collaborative effort between NASA-Ames, Boeing Commercial Airplane Group, Douglas Aircraft Corp., Lockheed-Georgia, General Electric and NASA - Lewis. The suppressor nozzles used in the tests were Generation 1 2-D mixer-ejector nozzles made by General Electric. The model used was a 13.5%-scale semi-span model of a Boeing Reference H configuration.

Introduction of the transtheoretical model and organisational development theory in weight management: A narrative review.

PubMed

Wu, Ya-Ke; Chu, Nain-Feng

2015-01-01

Overweight and obesity are serious public health and medical problems among children and adults worldwide. Behavioural change has been demonstrably contributory to weight management programs. Behavioural change-based weight loss programs require a theoretical framework. We will review the transtheoretical model and the organisational development theory in weight management. The transtheoretical model is a behaviour theory of individual level frequently used for weight management programs. The organisational development theory is a more complicated behaviour theory that applies to behavioural change on the system level. Both of these two theories have their respective strengths and weaknesses. In this manuscript, we try to introduce the transtheoretical model and the organisational development theory in the context of weight loss programs among population that are overweight or obese. Ultimately, we wish to present a new framework/strategy of weight management by integrating these two theories together. Copyright © 2015 Asian Oceanian Association for the Study of Obesity. Published by Elsevier Ltd. All rights reserved.

Online diabetes self-management program: a randomized study.

PubMed

Lorig, Kate; Ritter, Philip L; Laurent, Diana D; Plant, Kathryn; Green, Maurice; Jernigan, Valarie Blue Bird; Case, Siobhan

2010-06-01

We hypothesized that people with type 2 diabetes in an online diabetes self-management program, compared with usual-care control subjects, would 1) demonstrate reduced A1C at 6 and 18 months, 2) have fewer symptoms, 3) demonstrate increased exercise, and 4) have improved self-efficacy and patient activation. In addition, participants randomized to listserve reinforcement would have better 18-month outcomes than participants receiving no reinforcement. A total of 761 participants were randomized to 1) the program, 2) the program with e-mail reinforcement, or 3) were usual-care control subjects (no treatment). This sample included 110 American Indians/Alaska Natives (AI/ANs). Analyses of covariance models were used at the 6- and 18-month follow-up to compare groups. At 6 months, A1C, patient activation, and self-efficacy were improved for program participants compared with usual care control subjects (P < 0.05). There were no changes in other health or behavioral indicators. The AI/AN program participants demonstrated improvements in health distress and activity limitation compared with usual-care control subjects. The subgroup with initial A1C >7% demonstrated stronger improvement in A1C (P = 0.01). At 18 months, self-efficacy and patient activation were improved for program participants. A1C was not measured. Reinforcement showed no improvement. An online diabetes self-management program is acceptable for people with type 2 diabetes. Although the results were mixed they suggest 1) that the program may have beneficial effects in reducing A1C, 2) AI/AN populations can be engaged in and benefit from online interventions, and 3) our follow-up reinforcement appeared to have no value.

Electric train energy consumption modeling

DOE PAGES

Wang, Jinghui; Rakha, Hesham A.

2017-05-01

For this paper we develop an electric train energy consumption modeling framework considering instantaneous regenerative braking efficiency in support of a rail simulation system. The model is calibrated with data from Portland, Oregon using an unconstrained non-linear optimization procedure, and validated using data from Chicago, Illinois by comparing model predictions against the National Transit Database (NTD) estimates. The results demonstrate that regenerative braking efficiency varies as an exponential function of the deceleration level, rather than an average constant as assumed in previous studies. The model predictions are demonstrated to be consistent with the NTD estimates, producing a predicted error ofmore » 1.87% and -2.31%. The paper demonstrates that energy recovery reduces the overall power consumption by 20% for the tested Chicago route. Furthermore, the paper demonstrates that the proposed modeling approach is able to capture energy consumption differences associated with train, route and operational parameters, and thus is applicable for project-level analysis. The model can be easily implemented in traffic simulation software, used in smartphone applications and eco-transit programs given its fast execution time and easy integration in complex frameworks.« less

Electric train energy consumption modeling

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Jinghui; Rakha, Hesham A.

For this paper we develop an electric train energy consumption modeling framework considering instantaneous regenerative braking efficiency in support of a rail simulation system. The model is calibrated with data from Portland, Oregon using an unconstrained non-linear optimization procedure, and validated using data from Chicago, Illinois by comparing model predictions against the National Transit Database (NTD) estimates. The results demonstrate that regenerative braking efficiency varies as an exponential function of the deceleration level, rather than an average constant as assumed in previous studies. The model predictions are demonstrated to be consistent with the NTD estimates, producing a predicted error ofmore » 1.87% and -2.31%. The paper demonstrates that energy recovery reduces the overall power consumption by 20% for the tested Chicago route. Furthermore, the paper demonstrates that the proposed modeling approach is able to capture energy consumption differences associated with train, route and operational parameters, and thus is applicable for project-level analysis. The model can be easily implemented in traffic simulation software, used in smartphone applications and eco-transit programs given its fast execution time and easy integration in complex frameworks.« less

Model Accounting Program. Adopters Guide.

ERIC Educational Resources Information Center

Beaverton School District 48, OR.

The accounting cluster demonstration project conducted at Aloha High School in the Beaverton, Oregon, school district developed a model curriculum for high school accounting. The curriculum is based on interviews with professionals in the accounting field and emphasizes the use of computers. It is suitable for use with special needs students as…

Pivotal Response Group Treatment Program for Parents of Children with Autism

ERIC Educational Resources Information Center

Minjarez, Mendy Boettcher; Williams, Sharon E.; Mercier, Emma M.; Hardan, Antonio Y.

2011-01-01

The number of children diagnosed with autism spectrum disorders is increasing, necessitating the development of efficient treatment models. Research has demonstrated that parent-delivered behavioral interventions are a viable treatment model; however, little research has focused on teaching parents in groups. The aim of this study was to…

Demonstration of the Water Erosion Prediction Project (WEPP) internet interface and services

USDA-ARS?s Scientific Manuscript database

The Water Erosion Prediction Project (WEPP) model is a process-based FORTRAN computer simulation program for prediction of runoff and soil erosion by water at hillslope profile, field, and small watershed scales. To effectively run the WEPP model and interpret results additional software has been de...

The BEST Blueprint. Quality ABE in the Workplace.

ERIC Educational Resources Information Center

Westberry, Susan

The Basic Educational Skills Training (BEST) workplace literacy demonstration model was designed to provide adult basic education (ABE) services simultaneously for multiple employers in Maury County, Tennessee. The BEST model focused on job-related instruction. The goal of the program was to achieve increased safety, productivity, and employee…

Project BLEND: An Inclusive Model of Early Intervention Services.

ERIC Educational Resources Information Center

Brown, William; Horn, Eva M.; Heiser, JoAnn G.; Odom, Samuel L.

1996-01-01

This paper describes a model demonstration project to provide inclusive early intervention services to young children with developmental delays and their families. It notes the importance of collaborative partnerships among the significant adults in a child's life as a basis for effective program implementation. The project has three major…

Demonstration PreFab Solar Heated Vacation Home

ERIC Educational Resources Information Center

Ariola, Frank; Walencik, Vincent J.

1978-01-01

To update a traditional construction shop program, students at Passaic Valley High School, New Jersey, developed a mock-up model of a solar-heated A-frame vacation house using prefab construction. The article describes the project and illustrates it with photographs of the model and a drawing of the solar collector. (MF)

Reverse-engineering the genetic circuitry of a cancer cell with predicted intervention in chronic lymphocytic leukemia.

PubMed

Vallat, Laurent; Kemper, Corey A; Jung, Nicolas; Maumy-Bertrand, Myriam; Bertrand, Frédéric; Meyer, Nicolas; Pocheville, Arnaud; Fisher, John W; Gribben, John G; Bahram, Seiamak

2013-01-08

Cellular behavior is sustained by genetic programs that are progressively disrupted in pathological conditions--notably, cancer. High-throughput gene expression profiling has been used to infer statistical models describing these cellular programs, and development is now needed to guide orientated modulation of these systems. Here we develop a regression-based model to reverse-engineer a temporal genetic program, based on relevant patterns of gene expression after cell stimulation. This method integrates the temporal dimension of biological rewiring of genetic programs and enables the prediction of the effect of targeted gene disruption at the system level. We tested the performance accuracy of this model on synthetic data before reverse-engineering the response of primary cancer cells to a proliferative (protumorigenic) stimulation in a multistate leukemia biological model (i.e., chronic lymphocytic leukemia). To validate the ability of our method to predict the effects of gene modulation on the global program, we performed an intervention experiment on a targeted gene. Comparison of the predicted and observed gene expression changes demonstrates the possibility of predicting the effects of a perturbation in a gene regulatory network, a first step toward an orientated intervention in a cancer cell genetic program.

Delivering Summer Electronic Benefit Transfers for Children through the Supplemental Nutrition Assistance Program or the Special Supplemental Nutrition Program for Women, Infants, and Children: Benefit Use and Impacts on Food Security and Foods Consumed.

PubMed

Gordon, Anne R; Briefel, Ronette R; Collins, Ann M; Rowe, Gretchen M; Klerman, Jacob A

2017-03-01

The Summer Electronic Benefit Transfers for Children (SEBTC) demonstration piloted summer food assistance through electronic benefit transfers (EBTs), providing benefits either through the Special Supplemental Nutrition Program for Women, Infants, and Children (WIC) or the Supplemental Nutrition Assistance Program (SNAP) EBT. To inform food assistance policy and describe how demonstrations using WIC and SNAP models differed in benefit take-up and impacts on food security and children's food consumption. Sites chose to deliver SEBTC using the SNAP or WIC EBT system. Within each site, in 2012, households were randomly assigned to a benefit group or a no-benefit control group. Grantees (eight states and two Indian Tribal Organizations) selected school districts serving many low-income children. Schoolchildren were eligible in cases where they had been certified for free or reduced-price meals during the school year. Before the demonstration, households in the demonstration sample had lower incomes and lower food security, on average, than households with eligible children nationally. Grantees provided selected households with benefits worth $60 per child per summer month using SNAP or WIC EBT systems. SNAP-model benefits covered most foods. WIC-model benefits could only be used for a specific package of foods. Key outcomes were children's food security (assessed using the US Department of Agriculture food security scale) and food consumption (assessed using food frequency questions). Differences in mean outcomes between the benefit and control groups measured impact, after adjusting for household characteristics. In WIC sites, benefit-group households redeemed a lower percentage of SEBTC benefits than in SNAP sites. Nonetheless, the benefit groups in both sets of sites had similar large reductions in very low food security among children, relative to no-benefit controls. Children receiving benefits consumed more healthful foods, and these impacts were larger in WIC sites. Results suggest the WIC SEBTC model deserves strong consideration. Copyright © 2017 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

Uncertainty Evaluation of Computational Model Used to Support the Integrated Powerhead Demonstration Project

NASA Technical Reports Server (NTRS)

Steele, W. G.; Molder, K. J.; Hudson, S. T.; Vadasy, K. V.; Rieder, P. T.; Giel, T.

2005-01-01

NASA and the U.S. Air Force are working on a joint project to develop a new hydrogen-fueled, full-flow, staged combustion rocket engine. The initial testing and modeling work for the Integrated Powerhead Demonstrator (IPD) project is being performed by NASA Marshall and Stennis Space Centers. A key factor in the testing of this engine is the ability to predict and measure the transient fluid flow during engine start and shutdown phases of operation. A model built by NASA Marshall in the ROCket Engine Transient Simulation (ROCETS) program is used to predict transient engine fluid flows. The model is initially calibrated to data from previous tests on the Stennis E1 test stand. The model is then used to predict the next run. Data from this run can then be used to recalibrate the model providing a tool to guide the test program in incremental steps to reduce the risk to the prototype engine. In this paper, they define this type of model as a calibrated model. This paper proposes a method to estimate the uncertainty of a model calibrated to a set of experimental test data. The method is similar to that used in the calibration of experiment instrumentation. For the IPD example used in this paper, the model uncertainty is determined for both LOX and LH flow rates using previous data. The successful use of this model is then demonstrated to predict another similar test run within the uncertainty bounds. The paper summarizes the uncertainty methodology when a model is continually recalibrated with new test data. The methodology is general and can be applied to other calibrated models.

The MICA Case Conference Program at Tewksbury Hospital, Mass.: an integrated treatment model.

PubMed

Clodfelter, Reynolds C; Albanese, Mark J; Baker, Gregg; Domoto, Katherine; Gui, Amy L; Khantzian, Edward J

2003-01-01

This report describes the MICA (Mentally Ill Chemically Abusing) Program at the Tewksbury Hospital campus in Tewksbury, Massachusetts. Several campus facilities collaborate in the MICA Program. Through Expert Case Conferences, principles of integrated psychosocial treatment with dual diagnosis patients are demonstrated. An expert clinician focuses on the interplay between psychological pain, characterological traits, defenses, and the patient's drug of choice. Patients who have participated in the program have reported positive experiences. The staff reported that the program has resulted in facility improvement in assessment and treatment of complex dual diagnosis patients.

Emile: Software-Realized Scaffolding for Science Learners Programming in Mixed Media

NASA Astrophysics Data System (ADS)

Guzdial, Mark Joseph

Emile is a computer program that facilitates students using programming to create models of kinematics (physics of motion without forces) and executing these models as simulations. Emile facilitates student programming and model-building with software-realized scaffolding (SRS). Emile integrates a range of SRS and provides mechanisms to fade (or diminish) most scaffolding. By fading Emile's SRS, students can adapt support to their individual needs. Programming in Emile involves graphic and text elements (as compared with more traditional text-based programming). For example, students create graphical objects which can be dragged on the screen, and when dropped, fall as if in a gravitational field. Emile supports a simplified, HyperCard-like mixed media programming framework. Scaffolding is defined as support which enables student performance (called the immediate benefit of scaffolding) and which facilitates student learning (called the lasting benefit of scaffolding). Scaffolding provides this support through three methods: Modeling, coaching, and eliciting articulation. For example, Emile has tools to structure the programming task (modeling), menus identify the next step in the programming and model-building process (coaching), and prompts for student plans and predictions (eliciting articulation). Five students used Emile in a summer workshop (45 hours total) focusing on creating kinematics simulations and multimedia demonstrations. Evaluation of Emile's scaffolding addressed use of scaffolding and the expected immediate and lasting benefits. Emile created records of student interactions (log files) which were analyzed to determine how students used Emile's SRS and how they faded that scaffolding. Student projects and articulations about those projects were analyzed to assess success of student's model-building and programming activities. Clinical interviews were conducted before and after the workshop to determine students' conceptualizations of kinematics and programming and how they changed. The results indicate that students were successful at model-building and programming, learned physics and programming, and used and faded Emile's scaffolding over time. These results are from a small sample who were self -selected and highly-motivated. Nonetheless, this study provides a theory and operationalization for SRS, an example of a successful model-building environment, and a description of student use of mixed media programming.

Lunar exploration rover program developments

NASA Technical Reports Server (NTRS)

Klarer, P. R.

1994-01-01

The Robotic All Terrain Lunar Exploration Rover (RATLER) design concept began at Sandia National Laboratories in late 1991 with a series of small, proof-of-principle, working scale models. The models proved the viability of the concept for high mobility through mechanical simplicity, and eventually received internal funding at Sandia National Laboratories for full scale, proof-of-concept prototype development. Whereas the proof-of-principle models demonstrated the mechanical design's capabilities for mobility, the full scale proof-of-concept design currently under development is intended to support field operations for experiments in telerobotics, autonomous robotic operations, telerobotic field geology, and advanced man-machine interface concepts. The development program's current status is described, including an outline of the program's work over the past year, recent accomplishments, and plans for follow-on development work.

Simulation technique for modeling flow on floodplains and in coastal wetlands

USGS Publications Warehouse

Schaffranek, Raymond W.; Baltzer, Robert A.

1988-01-01

The system design is premised on a proven, areal two-dimensional, finite-difference flow/transport model which is supported by an operational set of computer programs for input data management and model output interpretation. The purposes of the project are (1) to demonstrate the utility of the model for providing useful highway design information, (2) to develop guidelines and procedures for using the simulation system for evaluation, analysis, and optimal design of highway crossings of floodplain and coastal wetland areas, and (3) to identify improvements which can be effected in the simulation system to better serve the needs of highway design engineers. Two case study model implementations, being conducted to demonstrate the simulation system and modeling procedure, are presented and discussed briefly.

Solving Infeasibility Problems in Computerized Test Assembly.

ERIC Educational Resources Information Center

Timminga, Ellen

1998-01-01

Discusses problems of diagnosing and repairing infeasible linear-programming models in computerized test assembly. Demonstrates that it is possible to localize the causes of infeasibility, although this is not always easy. (SLD)

PharmDock: a pharmacophore-based docking program

PubMed Central

2014-01-01

Background Protein-based pharmacophore models are enriched with the information of potential interactions between ligands and the protein target. We have shown in a previous study that protein-based pharmacophore models can be applied for ligand pose prediction and pose ranking. In this publication, we present a new pharmacophore-based docking program PharmDock that combines pose sampling and ranking based on optimized protein-based pharmacophore models with local optimization using an empirical scoring function. Results Tests of PharmDock on ligand pose prediction, binding affinity estimation, compound ranking and virtual screening yielded comparable or better performance to existing and widely used docking programs. The docking program comes with an easy-to-use GUI within PyMOL. Two features have been incorporated in the program suite that allow for user-defined guidance of the docking process based on previous experimental data. Docking with those features demonstrated superior performance compared to unbiased docking. Conclusion A protein pharmacophore-based docking program, PharmDock, has been made available with a PyMOL plugin. PharmDock and the PyMOL plugin are freely available from http://people.pharmacy.purdue.edu/~mlill/software/pharmdock. PMID:24739488

A Model Vocational High Technology in Health Care Demonstration Project. Final Performance Report.

ERIC Educational Resources Information Center

Valencia Community Coll., Orlando, FL.

A unique training program in high tech obstetrical, neonatal, and pediatric nursing care areas was designed to be offered on site at Orlando (Florida) Regional Medical/Arnold Palmer Hospital for Children and Women. The training program offered 16 different courses to 355 employees over the 18-month period of the project. A needs assessment was…

The Community College and the Homeless: A Model for the Nation. Job Training for the Homeless Demonstration Program Final Evaluation Report.

ERIC Educational Resources Information Center

Moehrlin, Cynthia D.

Established in 1981, the Alternatives Program at Elgin Community College (ECC) has provided services for displaced homemakers, single parents, welfare recipients, and homeless women, laying the groundwork for the 1988 formation of the Fox Valley Consortium for Job Training and Placement of the Homeless. Using federal funding, the Consortium offers…

Evaluating the efficacy of a landscape scale feral cat control program using camera traps and occupancy models.

PubMed

Comer, Sarah; Speldewinde, Peter; Tiller, Cameron; Clausen, Lucy; Pinder, Jeff; Cowen, Saul; Algar, Dave

2018-03-28

The impact of introduced predators is a major factor limiting survivorship and recruitment of many native Australian species. In particular, the feral cat and red fox have been implicated in range reductions and population declines of many conservation dependent species across Australia, including ground-nesting birds and small to medium-sized mammals. The impact of predation by feral cats since their introduction some 200 years ago has altered the structure of native fauna communities and led to the development of landscape-scale threat abatement via baiting programs with the feral cat bait, Eradicat. Demonstrating the effectiveness of broad-scale programs is essential for managers to fine tune delivery and timing of baiting. Efficacy of feral cat baiting at the Fortescue Marsh in the Pilbara, Western Australia was tested using camera traps and occupancy models. There was a significant decrease in probability of site occupancy in baited sites in each of the five years of this study, demonstrating both the effectiveness of aerial baiting for landscape-scale removal of feral cats, and the validity of camera trap monitoring techniques for detecting changes in feral cat occupancy during a five-year baiting program.

Theory and models for planning and evaluating institutional influenza prevention and control programs.

PubMed

Russell, Margaret L; Thurston, Wilfreda E; Henderson, Elizabeth A

2003-10-01

Low rates of staff influenza vaccine coverage occur in many health care facilities. Many programs do not offer vaccination to physicians or to volunteers, and some programs do not measure coverage or do so only for a subset of staff. The use of theory in planning and evaluation may prevent these problems and lead to more effective programs. We discuss the use of theory in the planning and evaluation of health programs and demonstrate how it can be used for the evaluation and planning of a hospital or nursing home influenza control program. The application of theory required explicit statement of the goals of the program and examination of the assumptions underlying potential program activities. This indicated that staff should probably be considered as employees, volunteers, physicians, and contractors of the facility. It also directed attention to evidence-based strategies for increasing vaccination rates. The application of a program planning model to a problem of institutional influenza prevention may prevent planners from excluding important target populations and failing to monitor the important indicators of program success.

A new generation T56 turboprop engine

DOE Office of Scientific and Technical Information (OSTI.GOV)

McIntire, W.L.

1984-06-01

The focus of the T56 Series IV turboprop engine development program is to improve power and fuel consumption through incorporation of demonstrated technology improvements while retaining the long term durability and cost effective design of the T56 family. The T56-A-427, the Navy Series IV derivative of the 5000 shp (3728.5 kW) class T56 turboprop engine, resulted from over ten years of technology development via Advanced Turbine Engine Gas Generator (ATEGG), Joint Technology Demonstrator Engine (JTDE), and advanced component programs at Allison Gas Turbine Operations. An example of government and industry cooperation to transfer advanced gas turbine technology is the Airmore » Force Engine Model Derivative Program (EMDP). The initial full-scale demonstration in this program confirmed a 10-1/2% reduction in specific fuel consumption (sfc) and a power growth of 21% in the basic T56 frame. Continued early demonstrations and development by IR and D, Navy funds, and Allison discretionary funds showed a further sfc reduction to 13% and power increase of 28%. The full-scale development program is now underway to provide production engines in late 1986. Engines will be available for the Grumman E-2 and C-2 aircraft, with follow-on adaptions for Lockheed C-130/L100 and P-3 aircraft, and generator sets for DD 963, DDG 993, CG 47 and DDG 51 warships.« less

Characteristics of effective summer learning programs in practice.

PubMed

Bell, Susanne R; Carrillo, Natalie

2007-01-01

The Center for Summer Learning examined various summer program models and found that there are nine characteristics that provide a framework for effective summer programs. In this chapter, the authors demonstrate how effective practices lead to positive results for young people. The nine characteristics of effective summer learning programs are (1) accelerating learning, (2) youth development, (3) proactive approach to summer learning, (4) leadership, (5) advanced planning, (6) staff development, (7) strategic partnerships, (8) evaluation and commitment to program improvement, and (9) sustainability and cost-effectiveness. These characteristics are divided into two sections. The first three characteristics address a program's approach to learning. Summer instructional techniques are most effective when academic learning is woven into enrichment activities and youth development. The second section covers program infrastructure to ensure the organization achieves and maintains quality programming. The nine characteristics complement each other to ensure a strong program that works to prevent summer learning loss and narrow the achievement gap. To demonstrate the variety of high-quality programs that include the nine characteristics, thirteen program profiles at the conclusion of the chapter each highlight one of the characteristics. These profiles show the various approaches that different summer programs have developed to accelerate academic achievement and promote positive development for young people in their communities.

Evidence-based economic analysis demonstrates that ecosystem service benefits of water hyacinth management greatly exceed research and control costs

PubMed Central

Harms, Nathan E.; Magen, Cedric; Liang, Dong; Nesslage, Genevieve M.; McMurray, Anna M.; Cofrancesco, Al F.

2018-01-01

Invasive species management can be a victim of its own success when decades of effective control cause memories of past harm to fade and raise questions of whether programs should continue. Economic analysis can be used to assess the efficiency of investing in invasive species control by comparing ecosystem service benefits to program costs, but only if appropriate data exist. We used a case study of water hyacinth (Eichhornia crassipes (Mart.) Solms), a nuisance floating aquatic plant, in Louisiana to demonstrate how comprehensive record-keeping supports economic analysis. Using long-term data sets, we developed empirical and spatio-temporal simulation models of intermediate complexity to project invasive species growth for control and no-control scenarios. For Louisiana, we estimated that peak plant cover would be 76% higher without the substantial growth rate suppression (84% reduction) that appeared due primarily to biological control agents. Our economic analysis revealed that combined biological and herbicide control programs, monitored over an unusually long time period (1975–2013), generated a benefit-cost ratio of about 34:1 derived from the relatively modest costs of $124 million ($2013) compared to the $4.2 billion ($2013) in benefits to anglers, waterfowl hunters, boating-dependent businesses, and water treatment facilities over the 38-year analysis period. This work adds to the literature by: (1) providing evidence of the effectiveness of water hyacinth biological control; (2) demonstrating use of parsimonious spatio-temporal models to estimate benefits of invasive species control; and (3) incorporating activity substitution into economic benefit transfer to avoid overstating benefits. Our study suggests that robust and cost-effective economic analysis is enabled by good record keeping and generalizable models that can demonstrate management effectiveness and promote social efficiency of invasive species control. PMID:29844976

Evidence-based economic analysis demonstrates that ecosystem service benefits of water hyacinth management greatly exceed research and control costs.

PubMed

Wainger, Lisa A; Harms, Nathan E; Magen, Cedric; Liang, Dong; Nesslage, Genevieve M; McMurray, Anna M; Cofrancesco, Al F

2018-01-01

Invasive species management can be a victim of its own success when decades of effective control cause memories of past harm to fade and raise questions of whether programs should continue. Economic analysis can be used to assess the efficiency of investing in invasive species control by comparing ecosystem service benefits to program costs, but only if appropriate data exist. We used a case study of water hyacinth ( Eichhornia crassipes (Mart.) Solms), a nuisance floating aquatic plant, in Louisiana to demonstrate how comprehensive record-keeping supports economic analysis. Using long-term data sets, we developed empirical and spatio-temporal simulation models of intermediate complexity to project invasive species growth for control and no-control scenarios. For Louisiana, we estimated that peak plant cover would be 76% higher without the substantial growth rate suppression (84% reduction) that appeared due primarily to biological control agents. Our economic analysis revealed that combined biological and herbicide control programs, monitored over an unusually long time period (1975-2013), generated a benefit-cost ratio of about 34:1 derived from the relatively modest costs of $124 million ($2013) compared to the $4.2 billion ($2013) in benefits to anglers, waterfowl hunters, boating-dependent businesses, and water treatment facilities over the 38-year analysis period. This work adds to the literature by: (1) providing evidence of the effectiveness of water hyacinth biological control; (2) demonstrating use of parsimonious spatio-temporal models to estimate benefits of invasive species control; and (3) incorporating activity substitution into economic benefit transfer to avoid overstating benefits. Our study suggests that robust and cost-effective economic analysis is enabled by good record keeping and generalizable models that can demonstrate management effectiveness and promote social efficiency of invasive species control.

Semilinear programming: applications and implementation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mohan, S.

Semilinear programming is a method of solving optimization problems with linear constraints where the non-negativity restrictions on the variables are dropped and the objective function coefficients can take on different values depending on whether the variable is positive or negative. The simplex method for linear programming is modified in this thesis to solve general semilinear and piecewise linear programs efficiently without having to transform them into equivalent standard linear programs. Several models in widely different areas of optimization such as production smoothing, facility locations, goal programming and L/sub 1/ estimation are presented first to demonstrate the compact formulation that arisesmore » when such problems are formulated as semilinear programs. A code SLP is constructed using the semilinear programming techniques. Problems in aggregate planning and L/sub 1/ estimation are solved using SLP and equivalent linear programs using a linear programming simplex code. Comparisons of CPU times and number iterations indicate SLP to be far superior. The semilinear programming techniques are extended to piecewise linear programming in the implementation of the code PLP. Piecewise linear models in aggregate planning are solved using PLP and equivalent standard linear programs using a simple upper bounded linear programming code SUBLP.« less

Intelligent Engine Systems Work Element 1.3: Sub System Health Management

NASA Technical Reports Server (NTRS)

Ashby, Malcolm; Simpson, Jeffrey; Singh, Anant; Ferguson, Emily; Frontera, mark

2005-01-01

The objectives of this program were to develop health monitoring systems and physics-based fault detection models for engine sub-systems including the start, lubrication, and fuel. These models will ultimately be used to provide more effective sub-system fault identification and isolation to reduce engine maintenance costs and engine down-time. Additionally, the bearing sub-system health is addressed in this program through identification of sensing requirements, a review of available technologies and a demonstration of a demonstration of a conceptual monitoring system for a differential roller bearing. This report is divided into four sections; one for each of the subtasks. The start system subtask is documented in section 2.0, the oil system is covered in section 3.0, bearing in section 4.0, and the fuel system is presented in section 5.0.

Modeling and prototyping of biometric systems using dataflow programming

NASA Astrophysics Data System (ADS)

Minakova, N.; Petrov, I.

2018-01-01

The development of biometric systems is one of the labor-intensive processes. Therefore, the creation and analysis of approaches and techniques is an urgent task at present. This article presents a technique of modeling and prototyping biometric systems based on dataflow programming. The technique includes three main stages: the development of functional blocks, the creation of a dataflow graph and the generation of a prototype. A specially developed software modeling environment that implements this technique is described. As an example of the use of this technique, an example of the implementation of the iris localization subsystem is demonstrated. A variant of modification of dataflow programming is suggested to solve the problem related to the undefined order of block activation. The main advantage of the presented technique is the ability to visually display and design the model of the biometric system, the rapid creation of a working prototype and the reuse of the previously developed functional blocks.

Combatting Global Infectious Diseases: A Network Effect of Specimen Referral Systems.

PubMed

Fonjungo, Peter N; Alemnji, George A; Kebede, Yenew; Opio, Alex; Mwangi, Christina; Spira, Thomas J; Beard, R Suzanne; Nkengasong, John N

2017-02-13

The recent Ebola virus outbreak in West Africa clearly demonstrated the critical role of laboratory systems and networks in responding to epidemics. Because of the huge challenges in establishing functional laboratories at all tiers of health systems in developing countries, strengthening specimen referral networks is critical. In this review article, we propose a platform strategy for developing specimen referral networks based on 2 models: centralized and decentralized laboratory specimen referral networks. These models have been shown to be effective in patient management in programs in resource-limited settings. Both models lead to reduced turnaround time and retain flexibility for integrating different specimen types. In Haiti, decentralized specimen referral systems resulted in a 182% increase in patients enrolling in human immunodeficiency virus treatment programs within 6 months. In Uganda, cost savings of up to 62% were observed with a centralized model. A platform strategy will create a network effect that will benefit multiple disease programs.

The NASA Commercial Crew Program (CCP) Shared Assurance Model for Safety

NASA Technical Reports Server (NTRS)

Kirkpatrick, Paul D.

2014-01-01

NASA established the Commercial Crew Program in order to provide human access to the International Space Station and low earth orbit via the commercial (nongovernmental) sector. A particular challenge to NASA is how to determine the commercial provider's transportation system complies with Programmatic safety requirements while at the same time allowing the provider the flexibility to demonstrate compliance. This will be accomplished through the use of Shared Assurance and Risk Based Assessment by NASA thus shifting more responsibility to the Provider. This model will be the focus of this presentation.

A historical perspective of the YF-12A thermal loads and structures program

NASA Technical Reports Server (NTRS)

Jenkins, Jerald M.; Quinn, Robert D.

1996-01-01

Around 1970, the Y-F-12A loads and structures efforts focused on numerous technological issues that needed defining with regard to aircraft that incorporate hot structures in the design. Laboratory structural heating test technology with infrared systems was largely created during this program. The program demonstrated the ability to duplicate the complex flight temperatures of an advanced supersonic airplane in a ground-based laboratory. The ability to heat and load an advanced operational aircraft in a laboratory at high temperatures and return it to flight status without adverse effects was demonstrated. The technology associated with measuring loads with strain gages on a hot structure was demonstrated with a thermal calibration concept. The results demonstrated that the thermal stresses were significant although the airplane was designed to reduce thermal stresses. Considerable modeling detail was required to predict the heat transfer and the corresponding structural characteristics. The overall YF-12A research effort was particularly productive, and a great deal of flight, laboratory, test and computational data were produced and cross-correlated.

uPy: a ubiquitous computer graphics Python API with Biological Modeling Applications

PubMed Central

Autin, L.; Johnson, G.; Hake, J.; Olson, A.; Sanner, M.

2015-01-01

In this paper we describe uPy, an extension module for the Python programming language that provides a uniform abstraction of the APIs of several 3D computer graphics programs called hosts, including: Blender, Maya, Cinema4D, and DejaVu. A plugin written with uPy is a unique piece of code that will run in all uPy-supported hosts. We demonstrate the creation of complex plug-ins for molecular/cellular modeling and visualization and discuss how uPy can more generally simplify programming for many types of projects (not solely science applications) intended for multi-host distribution. uPy is available at http://upy.scripps.edu PMID:24806987

A standard library for modeling satellite orbits on a microcomputer

NASA Astrophysics Data System (ADS)

Beutel, Kenneth L.

1988-03-01

Introductory students of astrodynamics and the space environment are required to have a fundamental understanding of the kinematic behavior of satellite orbits. This thesis develops a standard library that contains the basic formulas for modeling earth orbiting satellites. This library is used as a basis for implementing a satellite motion simulator that can be used to demonstrate orbital phenomena in the classroom. Surveyed are the equations of orbital elements, coordinate systems and analytic formulas, which are made into a standard method for modeling earth orbiting satellites. The standard library is written in the C programming language and is designed to be highly portable between a variety of computer environments. The simulation draws heavily on the standards established by the library to produce a graphics-based orbit simulation program written for the Apple Macintosh computer. The simulation demonstrates the utility of the standard library functions but, because of its extensive use of the Macintosh user interface, is not portable to other operating systems.

Waste management under multiple complexities: Inexact piecewise-linearization-based fuzzy flexible programming

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sun Wei; Huang, Guo H., E-mail: huang@iseis.org; Institute for Energy, Environment and Sustainable Communities, University of Regina, Regina, Saskatchewan, S4S 0A2

2012-06-15

Highlights: Black-Right-Pointing-Pointer Inexact piecewise-linearization-based fuzzy flexible programming is proposed. Black-Right-Pointing-Pointer It's the first application to waste management under multiple complexities. Black-Right-Pointing-Pointer It tackles nonlinear economies-of-scale effects in interval-parameter constraints. Black-Right-Pointing-Pointer It estimates costs more accurately than the linear-regression-based model. Black-Right-Pointing-Pointer Uncertainties are decreased and more satisfactory interval solutions are obtained. - Abstract: To tackle nonlinear economies-of-scale (EOS) effects in interval-parameter constraints for a representative waste management problem, an inexact piecewise-linearization-based fuzzy flexible programming (IPFP) model is developed. In IPFP, interval parameters for waste amounts and transportation/operation costs can be quantified; aspiration levels for net system costs, as well as tolerancemore » intervals for both capacities of waste treatment facilities and waste generation rates can be reflected; and the nonlinear EOS effects transformed from objective function to constraints can be approximated. An interactive algorithm is proposed for solving the IPFP model, which in nature is an interval-parameter mixed-integer quadratically constrained programming model. To demonstrate the IPFP's advantages, two alternative models are developed to compare their performances. One is a conventional linear-regression-based inexact fuzzy programming model (IPFP2) and the other is an IPFP model with all right-hand-sides of fussy constraints being the corresponding interval numbers (IPFP3). The comparison results between IPFP and IPFP2 indicate that the optimized waste amounts would have the similar patterns in both models. However, when dealing with EOS effects in constraints, the IPFP2 may underestimate the net system costs while the IPFP can estimate the costs more accurately. The comparison results between IPFP and IPFP3 indicate that their solutions would be significantly different. The decreased system uncertainties in IPFP's solutions demonstrate its effectiveness for providing more satisfactory interval solutions than IPFP3. Following its first application to waste management, the IPFP can be potentially applied to other environmental problems under multiple complexities.« less

Chapter Innovators Guide, 2000: Models of Innovation Award Winners.

ERIC Educational Resources Information Center

National FFA Organization, Indianapolis, IN.

This guide presents the Future Farmers of America (FFA) 2000 Model of Innovation award winners' projects. Chapters demonstrated abilities to identify goals and objectives, create a workable plan of action, attain and evaluate results, and identify items learned and ways to improve. Chapter 1 discusses the FFA National Chapter Award program that…

System IDentification Programs for AirCraft (SIDPAC)

NASA Technical Reports Server (NTRS)

Morelli, Eugene A.

2002-01-01

A collection of computer programs for aircraft system identification is described and demonstrated. The programs, collectively called System IDentification Programs for AirCraft, or SIDPAC, were developed in MATLAB as m-file functions. SIDPAC has been used successfully at NASA Langley Research Center with data from many different flight test programs and wind tunnel experiments. SIDPAC includes routines for experiment design, data conditioning, data compatibility analysis, model structure determination, equation-error and output-error parameter estimation in both the time and frequency domains, real-time and recursive parameter estimation, low order equivalent system identification, estimated parameter error calculation, linear and nonlinear simulation, plotting, and 3-D visualization. An overview of SIDPAC capabilities is provided, along with a demonstration of the use of SIDPAC with real flight test data from the NASA Glenn Twin Otter aircraft. The SIDPAC software is available without charge to U.S. citizens by request to the author, contingent on the requestor completing a NASA software usage agreement.

A research-based didactic model for education to promote culturally competent nursing care in Sweden.

PubMed

Gebru, Kerstin; Willman, Ania

2003-01-01

As Sweden changes toward a multicultural society, scientific knowledge of transcultural nursing care becomes increasingly important. Earlier studies in Swedish nursing education have demonstrated a lack of knowledge base in transcultural nursing. Through an extensive review of the literature, a didactic model was developed to help facilitate the establishment of this body of knowledge in transcultural nursing. The article demonstrates how the model applies the content and structure of Leininger's theory of culture care diversity and universality and ethnonursing method in a 3-year nursing program in theory as well as clinical education. The model includes a written guide for faculty members, with references to scientific articles and documents to be used.

THE GREEN RENOVATION AND EXPANSION OF THE AIKEN CENTER: A SUSTAINABLE GREEN BUILDING DESIGN, COLLABORATIVE PLANNING PROCESS AND LONG-TERM DEMONSTRATION AND RESEARCH PROJECT

EPA Science Inventory

One important outcome of this project will be the development of a long-term demonstration program that will provide teaching and research tools for many decades. In addition, we will develop models that will be available for others to use, present our findings to others, and ...

A Concept of Constructing a Common Information Space for High Tech Programs Using Information Analytical Systems

NASA Astrophysics Data System (ADS)

Zakharova, Alexandra A.; Kolegova, Olga A.; Nekrasova, Maria E.

2016-04-01

The paper deals with the issues in program management used for engineering innovative products. The existing project management tools were analyzed. The aim is to develop a decision support system that takes into account the features of program management used for high-tech products: research intensity, a high level of technical risks, unpredictable results due to the impact of various external factors, availability of several implementing agencies. The need for involving experts and using intelligent techniques for information processing is demonstrated. A conceptual model of common information space to support communication between members of the collaboration on high-tech programs has been developed. The structure and objectives of the information analysis system “Geokhod” were formulated with the purpose to implement the conceptual model of common information space in the program “Development and production of new class mining equipment - “Geokhod”.

Foundations of the Bandera Abstraction Tools

NASA Technical Reports Server (NTRS)

Hatcliff, John; Dwyer, Matthew B.; Pasareanu, Corina S.; Robby

2003-01-01

Current research is demonstrating that model-checking and other forms of automated finite-state verification can be effective for checking properties of software systems. Due to the exponential costs associated with model-checking, multiple forms of abstraction are often necessary to obtain system models that are tractable for automated checking. The Bandera Tool Set provides multiple forms of automated support for compiling concurrent Java software systems to models that can be supplied to several different model-checking tools. In this paper, we describe the foundations of Bandera's data abstraction mechanism which is used to reduce the cardinality (and the program's state-space) of data domains in software to be model-checked. From a technical standpoint, the form of data abstraction used in Bandera is simple, and it is based on classical presentations of abstract interpretation. We describe the mechanisms that Bandera provides for declaring abstractions, for attaching abstractions to programs, and for generating abstracted programs and properties. The contributions of this work are the design and implementation of various forms of tool support required for effective application of data abstraction to software components written in a programming language like Java which has a rich set of linguistic features.

SCI Hospital in Home Program: Bringing Hospital Care Home for Veterans With Spinal Cord Injury.

PubMed

Madaris, Linda L; Onyebueke, Mirian; Liebman, Janet; Martin, Allyson

2016-01-01

The complex nature of spinal cord injury (SCI) and the level of care required for health maintenance frequently result in repeated hospital admissions for recurrent medical complications. Prolonged hospitalizations of persons with SCI have been linked to the increased risk of hospital-acquired infections and development or worsening pressure ulcers. An evidence-based alternative for providing hospital-level care to patients with specific diagnoses who are willing to receive that level of care in the comfort of their home is being implemented in a Department of Veterans Affairs SCI Home Care Program. The SCI Hospital in Home (HiH) model is similar to a patient-centered interdisciplinary care model that was first introduced in Europe and later tested as part of a National Demonstration and Evaluation Study through Johns Hopkins School of Medicine and School of Public Health. This was funded by the John A. Hartford Foundation and the Department of Veterans Affairs. The objectives of the program are to support veterans' choice and access to patient-centered care, reduce the reliance on inpatient medical care, allow for early discharge, and decrease medical costs. Veterans with SCI who are admitted to the HiH program receive daily oversight by a physician, daily visits by a registered nurse, access to laboratory services, oxygen, intravenous medications, and nursing care in the home setting. In this model, patients may typically access HiH services either as an "early discharge" from the hospital or as a direct admit to the program from the emergency department or SCI clinic. Similar programs providing acute hospital-equivalent care in the home have been previously implemented and are successfully demonstrating decreased length of stay, improved patient access, and increased patient satisfaction.

CECE: Expanding the Envelope of Deep Throttling Technology in Liquid Oxygen/Liquid Hydrogen Rocket Engines for NASA Exploration Missions

NASA Technical Reports Server (NTRS)

Giuliano, Victor J.; Leonard, Timothy G.; Lyda, Randy T.; Kim, Tony S.

2010-01-01

As one of the first technology development programs awarded by NASA under the Vision for Space Exploration, the Pratt & Whitney Rocketdyne (PWR) Deep Throttling, Common Extensible Cryogenic Engine (CECE) program was selected by NASA in November 2004 to begin technology development and demonstration toward a deep throttling, cryogenic engine supporting ongoing trade studies for NASA s Lunar Lander descent stage. The CECE program leverages the maturity and previous investment of a flight-proven hydrogen/oxygen expander cycle engine, the PWR RL10, to develop and demonstrate an unprecedented combination of reliability, safety, durability, throttlability, and restart capabilities in high-energy, cryogenic, in-space propulsion. The testbed selected for the deep throttling demonstration phases of this program was a minimally modified RL10 engine, allowing for maximum current production engine commonality and extensibility with minimum program cost. Four series of demonstrator engine tests have been successfully completed between April 2006 and April 2010, accumulating 7,436 seconds of hot fire time over 47 separate tests. While the first two test series explored low power combustion (chug) and system instabilities, the third test series investigated and was ultimately successful in demonstrating several mitigating technologies for these instabilities and achieved a stable throttling ratio of 13:1. The fourth test series significantly expanded the engine s operability envelope by successfully demonstrating a closed-loop control system and extensive transient modeling to enable lower power engine starting, faster throttle ramp rates, and mission-specific ignition testing. The final hot fire test demonstrated a chug-free, minimum power level of 5.9%, corresponding to an overall 17.6:1 throttling ratio achieved. In total, these tests have provided an early technology demonstration of an enabling cryogenic propulsion concept with invaluable system-level technology data acquisition toward design and development risk mitigation for future lander descent main engines.

The Father Friendly Initiative within Families: Using a logic model to develop program theory for a father support program.

PubMed

Gervais, Christine; de Montigny, Francine; Lacharité, Carl; Dubeau, Diane

2015-10-01

The transition to fatherhood, with its numerous challenges, has been well documented. Likewise, fathers' relationships with health and social services have also begun to be explored. Yet despite the problems fathers experience in interactions with healthcare services, few programs have been developed for them. To explain this, some authors point to the difficulty practitioners encounter in developing and structuring the theory of programs they are trying to create to promote and support father involvement (Savaya, R., & Waysman, M. (2005). Administration in Social Work, 29(2), 85), even when such theory is key to a program's effectiveness (Chen, H.-T. (2005). Practical program evaluation. Thousand Oaks, CA: Sage Publications). The objective of the present paper is to present a tool, the logic model, to bridge this gap and to equip practitioners for structuring program theory. This paper addresses two questions: (1) What would be a useful instrument for structuring the development of program theory in interventions for fathers? (2) How would the concepts of a father involvement program best be organized? The case of the Father Friendly Initiative within Families (FFIF) program is used to present and illustrate six simple steps for developing a logic model that are based on program theory and demonstrate its relevance. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

Expansion of flight simulator capability for study and solution of aircraft directional control problems on runways, phase 1

NASA Technical Reports Server (NTRS)

1975-01-01

The MCAIR five-degree-of-freedom motion-base simulator (MBS) was used in combination with a six-degree-of-freedom aircraft mathematical model to demonstrate the simulation adequacy on uncrowned runways, under various conditions. Known aircraft parameters were used where possible to increase program credibility. Tire-runway friction models were coordinated with personnel of NASA, Langley Research Center. The F-4 experienced pilots representing NASA, FAA, and USAF participated in the 130 approach-touchdown-rollout demonstration and verified the simulation adequacy.

Team Software Process (TSP) Coach Mentoring Program Guidebook Version 1.1

DTIC Science & Technology

2010-06-01

All training was conducted in English only, and observations were limited to English- speaking coaches and teams. The SEI-Certified TSP Coach...programs also enable the expansion of TSP implementation to non-English- speaking teams and organizations. This expanded capacity for qualifying candidate...Improvement Could Benefit from Development Capable and Effective Role Model 1. I listen before speaking . 2. I demonstrate persuasiveness in

Investigation of the applicability of a functional programming model to fault-tolerant parallel processing for knowledge-based systems

NASA Technical Reports Server (NTRS)

Harper, Richard

1989-01-01

In a fault-tolerant parallel computer, a functional programming model can facilitate distributed checkpointing, error recovery, load balancing, and graceful degradation. Such a model has been implemented on the Draper Fault-Tolerant Parallel Processor (FTPP). When used in conjunction with the FTPP's fault detection and masking capabilities, this implementation results in a graceful degradation of system performance after faults. Three graceful degradation algorithms have been implemented and are presented. A user interface has been implemented which requires minimal cognitive overhead by the application programmer, masking such complexities as the system's redundancy, distributed nature, variable complement of processing resources, load balancing, fault occurrence and recovery. This user interface is described and its use demonstrated. The applicability of the functional programming style to the Activation Framework, a paradigm for intelligent systems, is then briefly described.

Wiisokotaatiwin: development and evaluation of a community-based palliative care program in Naotkamegwanning First Nation.

PubMed

Nadin, Shevaun; Crow, Maxine; Prince, Holly; Kelley, Mary Lou

2018-04-01

Approximately 474 000 Indigenous people live in 617 First Nations communities across Canada; 125 of those communities are located in Ontario, primarily in rural and remote areas. Common rural health challenges, including for palliative care, involve quality and access. The need for culturally relevant palliative care programs in First Nations communities is urgent because the population is aging with a high burden of chronic and terminal disease. Because local palliative care is lacking, most First Nations people now leave their culture, family and community to receive care in distant hospitals or long-term care homes. Due to jurisdictional issues, a policy gap exists where neither federal nor provincial governments takes responsibility for funding palliative care in First Nations communities. Further, no Canadian program models existed for how different levels of government can collaborate to fund and deliver palliative care in First Nations communities. This article describes an innovative, community-based palliative care program (Wiisokotaatiwin) developed in rural Naotkamegwanning, and presents the results of a process evaluation of its pilot implementation. The evaluation aimed to (i) document the program's pilot implementation, (ii) assess progress toward intended program outcomes and (iii) assess the perceived value of the program. The Wiisokotaatiwin Program was developed and implemented over 5 years using participatory action research (http://www.eolfn.lakeheadu.ca). A mixed-method evaluation approach was adopted. Descriptive data were extracted from program documents (eg client registration forms). Client tracking forms documented service provision data for a 4-month sample period. Quantitative and qualitative data were collected through client and family member questionnaires (n=7) and healthcare provider questionnaires (n=22). A focus group was conducted with the program leadership team responsible for program development. Quantitative data were summarized using descriptive statistics. An inductive approach was used to identify themes in the qualitative data related to the evaluation questions. The findings demonstrated the program was implemented as intended, and that there was a need for the program, with six clients on the 10-month pilot. The findings also indicated achievement of program-level outcomes and progress toward system-level outcomes. Clients/families and healthcare providers were satisfied with the program and perceived it to be meeting its objectives. The program model was also perceived to be transferrable to other First Nations communities. The results demonstrate how a rural First Nations community can build capacity and develop a palliative care program tailored to their unique culture and context that builds upon and is integrated into existing services. The Wiisokotaatiwin Program allowed community members to receive their palliative care at home, improved client experience and enhanced service integration. This article provides a First Nations specific model for a palliative care program that overcomes jurisdictional issues at the local level, and a methodology for developing and evaluating community-based palliative care programs in rural First Nations communities. The article demonstrates how local, federal and provincial healthcare providers and organizations collaborated to build capacity, fund and deliver community-based palliative care. The described process of developing the program has applicability in other First Nations (Indigenous) communities and for healthcare decisionmakers.

A framework for modeling and optimizing dynamic systems under uncertainty

DOE PAGES

Nicholson, Bethany; Siirola, John

2017-11-11

Algebraic modeling languages (AMLs) have drastically simplified the implementation of algebraic optimization problems. However, there are still many classes of optimization problems that are not easily represented in most AMLs. These classes of problems are typically reformulated before implementation, which requires significant effort and time from the modeler and obscures the original problem structure or context. In this work we demonstrate how the Pyomo AML can be used to represent complex optimization problems using high-level modeling constructs. We focus on the operation of dynamic systems under uncertainty and demonstrate the combination of Pyomo extensions for dynamic optimization and stochastic programming.more » We use a dynamic semibatch reactor model and a large-scale bubbling fluidized bed adsorber model as test cases.« less

A framework for modeling and optimizing dynamic systems under uncertainty

DOE Office of Scientific and Technical Information (OSTI.GOV)

Nicholson, Bethany; Siirola, John

Algebraic modeling languages (AMLs) have drastically simplified the implementation of algebraic optimization problems. However, there are still many classes of optimization problems that are not easily represented in most AMLs. These classes of problems are typically reformulated before implementation, which requires significant effort and time from the modeler and obscures the original problem structure or context. In this work we demonstrate how the Pyomo AML can be used to represent complex optimization problems using high-level modeling constructs. We focus on the operation of dynamic systems under uncertainty and demonstrate the combination of Pyomo extensions for dynamic optimization and stochastic programming.more » We use a dynamic semibatch reactor model and a large-scale bubbling fluidized bed adsorber model as test cases.« less

Optimum Vehicle Component Integration with InVeST (Integrated Vehicle Simulation Testbed)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ng, W; Paddack, E; Aceves, S

2001-12-27

We have developed an Integrated Vehicle Simulation Testbed (InVeST). InVeST is based on the concept of Co-simulation, and it allows the development of virtual vehicles that can be analyzed and optimized as an overall integrated system. The virtual vehicle is defined by selecting different vehicle components from a component library. Vehicle component models can be written in multiple programming languages running on different computer platforms. At the same time, InVeST provides full protection for proprietary models. Co-simulation is a cost-effective alternative to competing methodologies, such as developing a translator or selecting a single programming language for all vehicle components. InVeSTmore » has been recently demonstrated using a transmission model and a transmission controller model. The transmission model was written in SABER and ran on a Sun/Solaris workstation, while the transmission controller was written in MATRIXx and ran on a PC running Windows NT. The demonstration was successfully performed. Future plans include the applicability of Co-simulation and InVeST to analysis and optimization of multiple complex systems, including those of Intelligent Transportation Systems.« less

Dynamic modelling and simulation of linear Fresnel solar field model based on molten salt heat transfer fluid

NASA Astrophysics Data System (ADS)

Hakkarainen, Elina; Tähtinen, Matti

2016-05-01

Demonstrations of direct steam generation (DSG) in linear Fresnel collectors (LFC) have given promising results related to higher steam parameters compared to the current state-of-the-art parabolic trough collector (PTC) technology using oil as heat transfer fluid (HTF). However, DSG technology lacks feasible solution for long-term thermal energy storage (TES) system. This option is important for CSP technology in order to offer dispatchable power. Recently, molten salts have been proposed to be used as HTF and directly as storage medium in both line-focusing solar fields, offering storage capacity of several hours. This direct molten salt (DMS) storage concept has already gained operational experience in solar tower power plant, and it is under demonstration phase both in the case of LFC and PTC systems. Dynamic simulation programs offer a valuable effort for design and optimization of solar power plants. In this work, APROS dynamic simulation program is used to model a DMS linear Fresnel solar field with two-tank TES system, and example simulation results are presented in order to verify the functionality of the model and capability of APROS for CSP modelling and simulation.

Modelling and analysis of the sugar cataract development process using stochastic hybrid systems.

PubMed

Riley, D; Koutsoukos, X; Riley, K

2009-05-01

Modelling and analysis of biochemical systems such as sugar cataract development (SCD) are critical because they can provide new insights into systems, which cannot be easily tested with experiments; however, they are challenging problems due to the highly coupled chemical reactions that are involved. The authors present a stochastic hybrid system (SHS) framework for modelling biochemical systems and demonstrate the approach for the SCD process. A novel feature of the framework is that it allows modelling the effect of drug treatment on the system dynamics. The authors validate the three sugar cataract models by comparing trajectories computed by two simulation algorithms. Further, the authors present a probabilistic verification method for computing the probability of sugar cataract formation for different chemical concentrations using safety and reachability analysis methods for SHSs. The verification method employs dynamic programming based on a discretisation of the state space and therefore suffers from the curse of dimensionality. To analyse the SCD process, a parallel dynamic programming implementation that can handle large, realistic systems was developed. Although scalability is a limiting factor, this work demonstrates that the proposed method is feasible for realistic biochemical systems.

High speed turboprop aeroacoustic study (counterrotation). Volume 1: Model development

NASA Technical Reports Server (NTRS)

Whitfield, C. E.; Mani, R.; Gliebe, P. R.

1990-01-01

The isolated counterrotating high speed turboprop noise prediction program was compared with model data taken in the GE Aircraft Engines Cell 41 anechoic facility, the Boeing Transonic Wind Tunnel, and in NASA-Lewis' 8x6 and 9x15 wind tunnels. The predictions show good agreement with measured data under both low and high speed simulated flight conditions. The installation effect model developed for single rotation, high speed turboprops was extended to include counterotation. The additional effect of mounting a pylon upstream of the forward rotor was included in the flow field modeling. A nontraditional mechanism concerning the acoustic radiation from a propeller at angle of attach was investigated. Predictions made using this approach show results that are in much closer agreement with measurement over a range of operating conditions than those obtained via traditional fluctuating force methods. The isolated rotors and installation effects models were combines into a single prediction program, results of which were compared with data taken during the flight test of the B727/UDF engine demonstrator aircraft. Satisfactory comparisons between prediction and measured data for the demonstrator airplane, together with the identification of a nontraditional radiation mechanism for propellers at angle of attack are achieved.

High speed turboprop aeroacoustic study (counterrotation). Volume 1: Model development

NASA Astrophysics Data System (ADS)

Whitfield, C. E.; Mani, R.; Gliebe, P. R.

1990-07-01

The isolated counterrotating high speed turboprop noise prediction program was compared with model data taken in the GE Aircraft Engines Cell 41 anechoic facility, the Boeing Transonic Wind Tunnel, and in NASA-Lewis' 8x6 and 9x15 wind tunnels. The predictions show good agreement with measured data under both low and high speed simulated flight conditions. The installation effect model developed for single rotation, high speed turboprops was extended to include counterotation. The additional effect of mounting a pylon upstream of the forward rotor was included in the flow field modeling. A nontraditional mechanism concerning the acoustic radiation from a propeller at angle of attach was investigated. Predictions made using this approach show results that are in much closer agreement with measurement over a range of operating conditions than those obtained via traditional fluctuating force methods. The isolated rotors and installation effects models were combines into a single prediction program, results of which were compared with data taken during the flight test of the B727/UDF engine demonstrator aircraft. Satisfactory comparisons between prediction and measured data for the demonstrator airplane, together with the identification of a nontraditional radiation mechanism for propellers at angle of attack are achieved.

Application of the docking program SOL for CSAR benchmark.

PubMed

Sulimov, Alexey V; Kutov, Danil C; Oferkin, Igor V; Katkova, Ekaterina V; Sulimov, Vladimir B

2013-08-26

This paper is devoted to results obtained by the docking program SOL and the post-processing program DISCORE at the CSAR benchmark. SOL and DISCORE programs are described. SOL is the original docking program developed on the basis of the genetic algorithm, MMFF94 force field, rigid protein, precalculated energy grid including desolvation in the frame of simplified GB model, vdW, and electrostatic interactions and taking into account the ligand internal strain energy. An important SOL feature is the single- or multi-processor performance for up to hundreds of CPUs. DISCORE improves the binding energy scoring by the local energy optimization of the ligand docked pose and a simple linear regression on the base of available experimental data. The docking program SOL has demonstrated a good ability for correct ligand positioning in the active sites of the tested proteins in most cases of CSAR exercises. SOL and DISCORE have not demonstrated very exciting results on the protein-ligand binding free energy estimation. Nevertheless, for some target proteins, SOL and DISCORE were among the first in prediction of inhibition activity. Ways to improve SOL and DISCORE are discussed.

Improving the evidence base for services working with youth at-risk of involvement in the criminal justice system: developing a standardised program approach.

PubMed

Knight, Alice; Maple, Myfanwy; Shakeshaft, Anthony; Shakehsaft, Bernie; Pearce, Tania

2018-04-16

Young people who engage in multiple risk behaviour (high-risk young people) such as substance abuse, antisocial behaviour, low engagement in education and employment, self-harm or suicide ideation are more likely to experience serious harms later in life including homelessness, incarceration, violence and premature death. In addition to personal disadvantage, these harms represent an avoidable social and economic cost to society. Despite these harms, there is insufficient evidence about how to improve outcomes for high-risk young people. A key reason for this is a lack of standardisation in the way in which programs provided by services are defined and evaluated. This paper describes the development of a standardised intervention model for high-risk young people. The model can be used by service providers to achieve greater standardisation across their programs, outcomes and outcome measures. To demonstrate its feasibility, the model is applied to an existing program for high-risk young people. The development and uptake of a standardised intervention model for these programs will help to more rapidly develop a larger and more rigorous evidence-base to improve outcomes for high-risk young people.

Development of advanced fuel cell system, phase 2

NASA Technical Reports Server (NTRS)

Handley, L. M.; Meyer, A. P.; Bell, W. F.

1973-01-01

A multiple task research and development program was performed to improve the weight, life, and performance characteristics of hydrogen-oxygen alkaline fuel cells for advanced power systems. Development and characterization of a very stable gold alloy catalyst was continued from Phase I of the program. A polymer material for fabrication of cell structural components was identified and its long term compatibility with the fuel cell environment was demonstrated in cell tests. Full scale partial cell stacks, with advanced design closed cycle evaporative coolers, were tested. The characteristics demonstrated in these tests verified the feasibility of developing the engineering model system concept into an advanced lightweight long life powerplant.

Specification for a standard radar sea clutter model

NASA Astrophysics Data System (ADS)

Paulus, Richard A.

1990-09-01

A model for the average sea clutter radar cross section is proposed for the Oceanographic and Atmospheric Master Library. This model is a function of wind speed (or sea state), wind direction relative to the antenna, refractive conditions, radar antenna height, frequency, polarization, horizontal beamwidth, and compressed pulse length. The model is fully described, a FORTRAN 77 computer listing is provided, and test cases are given to demonstrate the proper operation of the program.

Strong tobacco control program requirements and secure funding are not enough: lessons from Florida.

PubMed

Kennedy, Allison; Sullivan, Sarah; Hendlin, Yogi; Barnes, Richard; Glantz, Stanton

2012-05-01

Florida's Tobacco Pilot Program (TPP; 1998-2003), with its edgy Truth media campaign, achieved unprecedented youth smoking reductions and became a model for tobacco control programming. In 2006, 3 years after the TPP was defunded, public health groups restored funding for tobacco control programming by convincing Florida voters to amend their constitution. Despite the new program's strong legal structure, Governor Charlie Crist's Department of Health implemented a low-impact program. Although they secured the program's strong structure and funding, Florida's nongovernmental public health organizations did not mobilize to demand a high-impact program. Implementation of Florida's Amendment 4 demonstrates that a strong programmatic structure and secure funding are insufficient to ensure a successful public health program, without external pressure from nongovernmental groups.

A systematic review on US-based community health navigator (CHN) interventions for cancer screening promotion--comparing community- versus clinic-based navigator models.

PubMed

Hou, Su-I; Roberson, Kiersten

2015-03-01

This study synthesized lessons learned from US-based community and clinic health navigator (CHN) interventions on cancer screening promotion to identify characteristics of models and approaches for addressing cancer disparities. The combination terms "cancer screening" and "community health workers or navigators" or "patient navigators" were used in searching Medline, CINAHL, and PsycInfo. A total of 27 articles published during January 2005∼April 2014 were included. Two CHN models were identified: community-based (15 studies) and clinic/hospital-based (12 studies). While both models used the term "navigators," most community-based programs referred them as community health workers/navigators/advisors, whereas clinic-based programs often called them patient navigators. Most community-based CHN interventions targeted specific racial/ethnic minority or rural groups, while clinic-based programs mostly targeted urban low income or mixed ethnic groups. Most community-based CHN programs outreached members from community networks, while clinic-based programs commonly worked with pre-identified in-service clients. Overall, regardless model type, CHNs had similar roles and responsibilities, and interventions demonstrated effective outcomes. Our review identified characteristics of CHN interventions with attention to different settings. Lessons learned have implication on the dissemination and implementation of CHN interventions for cancer screening promotion across setting and target groups.

Generalized Fluid System Simulation Program, Version 6.0

NASA Technical Reports Server (NTRS)

Majumdar, A. K.; LeClair, A. C.; Moore, A.; Schallhorn, P. A.

2013-01-01

The Generalized Fluid System Simulation Program (GFSSP) is a finite-volume based general-purpose computer program for analyzing steady state and time-dependant flow rates, pressures, temperatures, and concentrations in a complex flow network. The program is capable of modeling real fluids with phase changes, compressibility, mixture thermodynamics, conjugate heat transfer between solid and fluid, fluid transients, pumps, compressors and external body forces such as gravity and centrifugal. The thermo-fluid system to be analyzed is discretized into nodes, branches, and conductors. The scalar properties such as pressure, temperature, and concentrations are calculated at nodes. Mass flow rates and heat transfer rates are computed in branches and conductors. The graphical user interface allows users to build their models using the 'point, drag, and click' method; the users can also run their models and post-process the results in the same environment. The integrated fluid library supplies thermodynamic and thermo-physical properties of 36 fluids, and 24 different resistance/source options are provided for modeling momentum sources or sinks in the branches. This Technical Memorandum illustrates the application and verification of the code through 25 demonstrated example problems.

Generalized Fluid System Simulation Program, Version 5.0-Educational

NASA Technical Reports Server (NTRS)

Majumdar, A. K.

2011-01-01

The Generalized Fluid System Simulation Program (GFSSP) is a finite-volume based general-purpose computer program for analyzing steady state and time-dependent flow rates, pressures, temperatures, and concentrations in a complex flow network. The program is capable of modeling real fluids with phase changes, compressibility, mixture thermodynamics, conjugate heat transfer between solid and fluid, fluid transients, pumps, compressors and external body forces such as gravity and centrifugal. The thermofluid system to be analyzed is discretized into nodes, branches, and conductors. The scalar properties such as pressure, temperature, and concentrations are calculated at nodes. Mass flow rates and heat transfer rates are computed in branches and conductors. The graphical user interface allows users to build their models using the point, drag and click method; the users can also run their models and post-process the results in the same environment. The integrated fluid library supplies thermodynamic and thermo-physical properties of 36 fluids and 21 different resistance/source options are provided for modeling momentum sources or sinks in the branches. This Technical Memorandum illustrates the application and verification of the code through 12 demonstrated example problems.

Documentation of a graphical display program for the saturated- unsaturated transport (SUTRA) finite-element simulation model

USGS Publications Warehouse

Souza, W.R.

1987-01-01

This report documents a graphical display program for the U. S. Geological Survey finite-element groundwater flow and solute transport model. Graphic features of the program, SUTRA-PLOT (SUTRA-PLOT = saturated/unsaturated transport), include: (1) plots of the finite-element mesh, (2) velocity vector plots, (3) contour plots of pressure, solute concentration, temperature, or saturation, and (4) a finite-element interpolator for gridding data prior to contouring. SUTRA-PLOT is written in FORTRAN 77 on a PRIME 750 computer system, and requires Version 9.0 or higher of the DISSPLA graphics library. The program requires two input files: the SUTRA input data list and the SUTRA simulation output listing. The program is menu driven and specifications for individual types of plots are entered and may be edited interactively. Installation instruction, a source code listing, and a description of the computer code are given. Six examples of plotting applications are used to demonstrate various features of the plotting program. (Author 's abstract)

Final Report from The University of Texas at Austin for DEGAS: Dynamic Global Address Space programming environments

DOE Office of Scientific and Technical Information (OSTI.GOV)

Erez, Mattan; Yelick, Katherine; Sarkar, Vivek

The Dynamic, Exascale Global Address Space programming environment (DEGAS) project will develop the next generation of programming models and runtime systems to meet the challenges of Exascale computing. Our approach is to provide an efficient and scalable programming model that can be adapted to application needs through the use of dynamic runtime features and domain-specific languages for computational kernels. We address the following technical challenges: Programmability: Rich set of programming constructs based on a Hierarchical Partitioned Global Address Space (HPGAS) model, demonstrated in UPC++. Scalability: Hierarchical locality control, lightweight communication (extended GASNet), and ef- ficient synchronization mechanisms (Phasers). Performance Portability:more » Just-in-time specialization (SEJITS) for generating hardware-specific code and scheduling libraries for domain-specific adaptive runtimes (Habanero). Energy Efficiency: Communication-optimal code generation to optimize energy efficiency by re- ducing data movement. Resilience: Containment Domains for flexible, domain-specific resilience, using state capture mechanisms and lightweight, asynchronous recovery mechanisms. Interoperability: Runtime and language interoperability with MPI and OpenMP to encourage broad adoption.« less

Optimization strategies for molecular dynamics programs on Cray computers and scalar work stations

NASA Astrophysics Data System (ADS)

Unekis, Michael J.; Rice, Betsy M.

1994-12-01

We present results of timing runs and different optimization strategies for a prototype molecular dynamics program that simulates shock waves in a two-dimensional (2-D) model of a reactive energetic solid. The performance of the program may be improved substantially by simple changes to the Fortran or by employing various vendor-supplied compiler optimizations. The optimum strategy varies among the machines used and will vary depending upon the details of the program. The effect of various compiler options and vendor-supplied subroutine calls is demonstrated. Comparison is made between two scalar workstations (IBM RS/6000 Model 370 and Model 530) and several Cray supercomputers (X-MP/48, Y-MP8/128, and C-90/16256). We find that for a scientific application program dominated by sequential, scalar statements, a relatively inexpensive high-end work station such as the IBM RS/60006 RISC series will outperform single processor performance of the Cray X-MP/48 and perform competitively with single processor performance of the Y-MP8/128 and C-9O/16256.

Effect of virtual memory on efficient solution of two model problems

NASA Technical Reports Server (NTRS)

Lambiotte, J. J., Jr.

1977-01-01

Computers with virtual memory architecture allow programs to be written as if they were small enough to be contained in memory. Two types of problems are investigated to show that this luxury can lead to quite an inefficient performance if the programmer does not interact strongly with the characteristics of the operating system when developing the program. The two problems considered are the simultaneous solutions of a large linear system of equations by Gaussian elimination and a model three-dimensional finite-difference problem. The Control Data STAR-100 computer runs are made to demonstrate the inefficiencies of programming the problems in the manner one would naturally do if the problems were indeed, small enough to be contained in memory. Program redesigns are presented which achieve large improvements in performance through changes in the computational procedure and the data base arrangement.

Qualification of Commercial XIPS(R) Ion Thrusters for NASA Deep Space Missions

NASA Technical Reports Server (NTRS)

Goebel, Dan M.; Polk, James E.; Wirz, Richard E.; Snyder, J.Steven; Mikellides, Ioannis G.; Katz, Ira; Anderson, John

2008-01-01

Electric propulsion systems based on commercial ion and Hall thrusters have the potential for significantly reducing the cost and schedule-risk of Ion Propulsion Systems (IPS) for deep space missions. The large fleet of geosynchronous communication satellites that use solar electric propulsion (SEP), which will approach 40 satellites by year-end, demonstrates the significant level of technical maturity and spaceflight heritage achieved by the commercial IPS systems. A program to delta-qualify XIPS(R) ion thrusters for deep space missions is underway at JPL. This program includes modeling of the thruster grid and cathode life, environmental testing of a 25-centimeter electromagnetic (EM) thruster over DAWN-like vibe and temperature profiles, and wear testing of the thruster cathodes to demonstrate the life and benchmark the model results. This paper will present the delta-qualification status of the XIPS thruster and discuss the life and reliability with respect to known failure mechanisms.

Space Station Cathode Design, Performance, and Operating Specifications

NASA Technical Reports Server (NTRS)

Patterson, Michael J.; Verhey, Timothy R.; Soulas, George; Zakany, James

1998-01-01

A plasma contactor system was baselined for the International Space Station (ISS) to eliminate/mitigate damaging interactions with the space environment. The system represents a dual-use technology which is a direct outgrowth of the NASA electric propulsion program and, in particular, the technology development efforts on ion thruster systems. The plasma contactor includes a hollow cathode assembly (HCA), a power electronics unit, and a xenon gas feed system. Under a pre-flight development program, these subsystems were taken to the level of maturity appropriate for transfer to U.S. industry for final development. NASA's Lewis Research Center was subsequently requested by ISS to manufacture and deliver the engineering model, qualification model, and flight HCA units. To date, multiple units have been built. One cathode has demonstrated approximately 28,000 hours lifetime, two development unit HCAs have demonstrated over 10,000 hours lifetime, and one development unit HCA has demonstrated more than 32,000 ignitions. All 8 flight HCAs have been manufactured, acceptance tested, and are ready for delivery to the flight contractor. This paper discusses the requirements, mechanical design, performance, operating specifications, and schedule for the plasma contactor flight HCAs.

Animal-Related Computer Simulation Programs for Use in Education and Research. AWIC Series Number 1.

ERIC Educational Resources Information Center

Engler, Kevin P.

Computer models have definite limitations regarding the representation of biological systems, but they do have useful applications in reducing the number of animals used to study physiological systems, especially for educational purposes. This guide lists computer models that simulate living systems and can be used to demonstrate physiological,…

The Early Start Denver Model: A Case Study of an Innovative Practice

ERIC Educational Resources Information Center

Vismara, Laurie A.; Rogers, Sally J.

2008-01-01

Intervention was implemented with an infant identified at 9 months of age with a behavioral profile consistent with autistic spectrum disorder. The intervention approach, the Early Start Denver model, consisted of a 12-week, 1.5-hr-per-week individualized parent-child education program. Results of this case study demonstrated that the parent…

76 FR 40898 - Final Priorities, Requirements, and Selection Criteria; Charter Schools Program (CSP) Grants for...

Federal Register 2010, 2011, 2012, 2013, 2014

2011-07-12

... schools. (3) A multi-year financial and operating model for the organization, a demonstrated commitment of... school model and to expand the number of high-quality charter schools available to students across the... percent threshold in this priority is consistent with the average percentage of students in large urban...

Ceramic component reliability with the restructured NASA/CARES computer program

NASA Technical Reports Server (NTRS)

Powers, Lynn M.; Starlinger, Alois; Gyekenyesi, John P.

1992-01-01

The Ceramics Analysis and Reliability Evaluation of Structures (CARES) integrated design program on statistical fast fracture reliability and monolithic ceramic components is enhanced to include the use of a neutral data base, two-dimensional modeling, and variable problem size. The data base allows for the efficient transfer of element stresses, temperatures, and volumes/areas from the finite element output to the reliability analysis program. Elements are divided to insure a direct correspondence between the subelements and the Gaussian integration points. Two-dimensional modeling is accomplished by assessing the volume flaw reliability with shell elements. To demonstrate the improvements in the algorithm, example problems are selected from a round-robin conducted by WELFEP (WEakest Link failure probability prediction by Finite Element Postprocessors).

A chance-constrained stochastic approach to intermodal container routing problems.

PubMed

Zhao, Yi; Liu, Ronghui; Zhang, Xi; Whiteing, Anthony

2018-01-01

We consider a container routing problem with stochastic time variables in a sea-rail intermodal transportation system. The problem is formulated as a binary integer chance-constrained programming model including stochastic travel times and stochastic transfer time, with the objective of minimising the expected total cost. Two chance constraints are proposed to ensure that the container service satisfies ship fulfilment and cargo on-time delivery with pre-specified probabilities. A hybrid heuristic algorithm is employed to solve the binary integer chance-constrained programming model. Two case studies are conducted to demonstrate the feasibility of the proposed model and to analyse the impact of stochastic variables and chance-constraints on the optimal solution and total cost.

A chance-constrained stochastic approach to intermodal container routing problems

PubMed Central

Zhao, Yi; Zhang, Xi; Whiteing, Anthony

2018-01-01

We consider a container routing problem with stochastic time variables in a sea-rail intermodal transportation system. The problem is formulated as a binary integer chance-constrained programming model including stochastic travel times and stochastic transfer time, with the objective of minimising the expected total cost. Two chance constraints are proposed to ensure that the container service satisfies ship fulfilment and cargo on-time delivery with pre-specified probabilities. A hybrid heuristic algorithm is employed to solve the binary integer chance-constrained programming model. Two case studies are conducted to demonstrate the feasibility of the proposed model and to analyse the impact of stochastic variables and chance-constraints on the optimal solution and total cost. PMID:29438389

An automated approach to design of solid rockets utilizing a special internal ballistics model

NASA Technical Reports Server (NTRS)

Sforzini, R. H.

1980-01-01

A pattern search technique is presented, which is utilized in a computer program that minimizes the sum of the squares of the differences, at various times, between a desired thrust-time trace and that calculated with a special mathematical internal ballistics model of a solid propellant rocket motor. The program is demonstrated by matching the thrust-time trace obtained from static tests of the first Space Shuttle SRM starting with input values of 10 variables which are, in general, 10% different from the as-built SRM. It is concluded that an excellent match is obtained.

Effectively executing a comprehensive marketing communication strategy.

PubMed

Gombeski, William R; Taylor, Jan; Piccirilli, Ami; Cundiff, Lee; Britt, Jason

2007-01-01

Marketers are under increasing scrutiny from their management to demonstrate accountability for the resources they receive. Three models are presented to help marketers execute their customer communication activities more effectively. Benefits of using the "Identification of Strategic Communication Elements," "Business Communication" and "Communications Management Process" models include (1) more effective upfront strategic and tactical planning, (2) ensuring key communication principles are addressed, (3) easier communication program communication, (4) provides a framework for program evaluation and market research and (5) increases the creative thinking marketers need when addressing the major marketing challenges. The ultimate benefit is the greater likelihood of more positive marketing results.

Automated procedures for sizing aerospace vehicle structures /SAVES/

NASA Technical Reports Server (NTRS)

Giles, G. L.; Blackburn, C. L.; Dixon, S. C.

1972-01-01

Results from a continuing effort to develop automated methods for structural design are described. A system of computer programs presently under development called SAVES is intended to automate the preliminary structural design of a complete aerospace vehicle. Each step in the automated design process of the SAVES system of programs is discussed, with emphasis placed on use of automated routines for generation of finite-element models. The versatility of these routines is demonstrated by structural models generated for a space shuttle orbiter, an advanced technology transport,n hydrogen fueled Mach 3 transport. Illustrative numerical results are presented for the Mach 3 transport wing.

Scalable Failure Masking for Stencil Computations using Ghost Region Expansion and Cell to Rank Remapping

DOE PAGES

Gamell, Marc; Teranishi, Keita; Kolla, Hemanth; ...

2017-10-26

In order to achieve exascale systems, application resilience needs to be addressed. Some programming models, such as task-DAG (directed acyclic graphs) architectures, currently embed resilience features whereas traditional SPMD (single program, multiple data) and message-passing models do not. Since a large part of the community's code base follows the latter models, it is still required to take advantage of application characteristics to minimize the overheads of fault tolerance. To that end, this paper explores how recovering from hard process/node failures in a local manner is a natural approach for certain applications to obtain resilience at lower costs in faulty environments.more » In particular, this paper targets enabling online, semitransparent local recovery for stencil computations on current leadership-class systems as well as presents programming support and scalable runtime mechanisms. Also described and demonstrated in this paper is the effect of failure masking, which allows the effective reduction of impact on total time to solution due to multiple failures. Furthermore, we discuss, implement, and evaluate ghost region expansion and cell-to-rank remapping to increase the probability of failure masking. To conclude, this paper shows the integration of all aforementioned mechanisms with the S3D combustion simulation through an experimental demonstration (using the Titan system) of the ability to tolerate high failure rates (i.e., node failures every five seconds) with low overhead while sustaining performance at large scales. In addition, this demonstration also displays the failure masking probability increase resulting from the combination of both ghost region expansion and cell-to-rank remapping.« less

Scalable Failure Masking for Stencil Computations using Ghost Region Expansion and Cell to Rank Remapping

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gamell, Marc; Teranishi, Keita; Kolla, Hemanth

In order to achieve exascale systems, application resilience needs to be addressed. Some programming models, such as task-DAG (directed acyclic graphs) architectures, currently embed resilience features whereas traditional SPMD (single program, multiple data) and message-passing models do not. Since a large part of the community's code base follows the latter models, it is still required to take advantage of application characteristics to minimize the overheads of fault tolerance. To that end, this paper explores how recovering from hard process/node failures in a local manner is a natural approach for certain applications to obtain resilience at lower costs in faulty environments.more » In particular, this paper targets enabling online, semitransparent local recovery for stencil computations on current leadership-class systems as well as presents programming support and scalable runtime mechanisms. Also described and demonstrated in this paper is the effect of failure masking, which allows the effective reduction of impact on total time to solution due to multiple failures. Furthermore, we discuss, implement, and evaluate ghost region expansion and cell-to-rank remapping to increase the probability of failure masking. To conclude, this paper shows the integration of all aforementioned mechanisms with the S3D combustion simulation through an experimental demonstration (using the Titan system) of the ability to tolerate high failure rates (i.e., node failures every five seconds) with low overhead while sustaining performance at large scales. In addition, this demonstration also displays the failure masking probability increase resulting from the combination of both ghost region expansion and cell-to-rank remapping.« less

USAF/SCEEE Summer Faculty Research Program (1982). Management Report.

DTIC Science & Technology

1982-10-01

Patrick J. Sweeney, Ph.D., P.E. Mary Doddy, M.S. ABSTRACT This dynamic simulation computer model demonstrates the affects of C-forces upon the eyeball...Assistant Professor Specialty: Numerical Modeling and University of Lowell Computer Simulation of Mathematics Department Geophysical Problems Lowell...Problems And Promises 25 Modeling And Tracking Saccadic Dr. John D. Enderle Eye Movements 26 Dynamic Response Of Doubly Curved Dr. Fernando E. Fagundo

Digitizing for Computer-Aided Finite Element Model Generation.

DTIC Science & Technology

1979-10-10

this approach is a collection of programs developed over the last eight years at the University of Arizona, and called the GIFTS system. This paper...briefly describes the latest version of the system, GIFTS -5, and demonstrates its suitability in a design environment by simple examples. The programs...constituting the GIFTS system were used as a tool for research in many areas, including mesh generation, finite element data base design, interactive

Feasibility of Training Early Childhood Educators in a Community Child Care Setting Using a Caregiver-Mediated Intervention for Toddlers with Autism Spectrum Disorder

ERIC Educational Resources Information Center

Brian, Jessica; Bernardi, Kate; Dowds, Erin; Easterbrook, Rachel; MacWilliam, Stacey; Bryson, Susan

2017-01-01

Parent-mediated intervention programs have demonstrated benefits for toddlers with autism spectrum disorder (ASD). Interest is emerging in other community-level models, such as those that can be integrated into child care settings. These programs have the potential to reach a wide range of high-risk toddlers who spend the majority of their day in…

Optimum structural sizing of conventional cantilever and joined wing configurations using equivalent beam models

NASA Technical Reports Server (NTRS)

Hajela, P.; Chen, J. L.

1986-01-01

The present paper describes an approach for the optimum sizing of single and joined wing structures that is based on representing the built-up finite element model of the structure by an equivalent beam model. The low order beam model is computationally more efficient in an environment that requires repetitive analysis of several trial designs. The design procedure is implemented in a computer program that requires geometry and loading data typically available from an aerodynamic synthesis program, to create the finite element model of the lifting surface and an equivalent beam model. A fully stressed design procedure is used to obtain rapid estimates of the optimum structural weight for the beam model for a given geometry, and a qualitative description of the material distribution over the wing structure. The synthesis procedure is demonstrated for representative single wing and joined wing structures.

The Use of a Small Private Online Course to Allow Educators to Share Teaching Resources Across Diverse Sites: The Future of Psychiatric Case Conferences?

PubMed

Lockhart, Billy J; Capurso, Noah A; Chase, Isaiah; Arbuckle, Melissa R; Travis, Michael J; Eisen, Jane; Ross, David A

2017-02-01

The authors sought to demonstrate the feasibility of integrating small private online course (SPOC) technology with flipped classroom techniques in order to improve neuroscience education across diverse training sites. Post-graduate medical educators used SPOC web conferencing software and video technology to implement an integrated case conference and in-depth neuroscience discussion. Ten psychiatry training programs from across the USA and from two international sites took part in the conference. Feedback from participants was largely positive. This pilot demonstrated the feasibility of such a program and provided a diverse audience with the opportunity to engage in an interactive learning experience with expert faculty discussants. This may be a useful model for programs with limited local expertise to expand their teaching efforts in a wide range of topics.

Chemistry Notes.

ERIC Educational Resources Information Center

School Science Review, 1982

1982-01-01

Presents laboratory procedures, classroom materials/activities, and demonstrations, including: vapor pressure of liquid mixtures and Raoult's law; preparation/analysis of transition metal complexes of ethylammonium chloride; atomic structure display using a ZX81 (includes complete program listing); "pop-up" models of molecules and ions;…

Science Notes.

ERIC Educational Resources Information Center

School Science Review, 1985

1985-01-01

Presents 23 experiments, demonstrations, activities, and computer programs in biology, chemistry, and physics. Topics include lead in petrol, production of organic chemicals, reduction of water, enthalpy, X-ray diffraction model, nuclear magnetic resonance spectroscopy, computer simulation for additive mixing of colors, Archimedes Principle, and…

Space Awareness Program - Spacemobile - TX

NASA Image and Video Library

2009-10-01

Photo documentation of NASA Public Affairs Office Personnel from Education Office and Public Information Office at Space Awareness lectures/demonstrations in San Antonio and El Paso, TX. Tom Hill, a Spacemobile lecturer, is seen in the view showing a model to children.

HYDRA: Macroscopic 3D Approach of Light Weight Ablator

NASA Astrophysics Data System (ADS)

Pinaud, G.; Barcena, J.; Bouilly, J.-M.; Leroy, V.; Fischer, Wpp.; Massuti, T.

2014-06-01

The HYDRA project is an European funded program that aims at developing novel solution in term of TPS associated to a demonstration of Technology Readiness Level (TRL) 4. We describe modelling activities (radiation/ablation) compared to plasma test.

Use of nonlinear programming to optimize performance response to energy density in broiler feed formulation.

PubMed

Guevara, V R

2004-02-01

A nonlinear programming optimization model was developed to maximize margin over feed cost in broiler feed formulation and is described in this paper. The model identifies the optimal feed mix that maximizes profit margin. Optimum metabolizable energy level and performance were found by using Excel Solver nonlinear programming. Data from an energy density study with broilers were fitted to quadratic equations to express weight gain, feed consumption, and the objective function income over feed cost in terms of energy density. Nutrient:energy ratio constraints were transformed into equivalent linear constraints. National Research Council nutrient requirements and feeding program were used for examining changes in variables. The nonlinear programming feed formulation method was used to illustrate the effects of changes in different variables on the optimum energy density, performance, and profitability and was compared with conventional linear programming. To demonstrate the capabilities of the model, I determined the impact of variation in prices. Prices for broiler, corn, fish meal, and soybean meal were increased and decreased by 25%. Formulations were identical in all other respects. Energy density, margin, and diet cost changed compared with conventional linear programming formulation. This study suggests that nonlinear programming can be more useful than conventional linear programming to optimize performance response to energy density in broiler feed formulation because an energy level does not need to be set.

Nuclear Engine System Simulation (NESS). Version 2.0: Program user's guide

NASA Technical Reports Server (NTRS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman

1993-01-01

This Program User's Guide discusses the Nuclear Thermal Propulsion (NTP) engine system design features and capabilities modeled in the Nuclear Engine System Simulation (NESS): Version 2.0 program (referred to as NESS throughout the remainder of this document), as well as its operation. NESS was upgraded to include many new modeling capabilities not available in the original version delivered to NASA LeRC in Dec. 1991, NESS's new features include the following: (1) an improved input format; (2) an advanced solid-core NERVA-type reactor system model (ENABLER 2); (3) a bleed-cycle engine system option; (4) an axial-turbopump design option; (5) an automated pump-out turbopump assembly sizing option; (6) an off-design gas generator engine cycle design option; (7) updated hydrogen properties; (8) an improved output format; and (9) personal computer operation capability. Sample design cases are presented in the user's guide that demonstrate many of the new features associated with this upgraded version of NESS, as well as design modeling features associated with the original version of NESS.

Ad Hoc modeling, expert problem solving, and R&T program evaluation

NASA Technical Reports Server (NTRS)

Silverman, B. G.; Liebowitz, J.; Moustakis, V. S.

1983-01-01

A simplified cost and time (SCAT) analysis program utilizing personal-computer technology is presented and demonstrated in the case of the NASA-Goddard end-to-end data system. The difficulties encountered in implementing complex program-selection and evaluation models in the research and technology field are outlined. The prototype SCAT system described here is designed to allow user-friendly ad hoc modeling in real time and at low cost. A worksheet constructed on the computer screen displays the critical parameters and shows how each is affected when one is altered experimentally. In the NASA case, satellite data-output and control requirements, ground-facility data-handling capabilities, and project priorities are intricately interrelated. Scenario studies of the effects of spacecraft phaseout or new spacecraft on throughput and delay parameters are shown. The use of a network of personal computers for higher-level coordination of decision-making processes is suggested, as a complement or alternative to complex large-scale modeling.

Forebody/Inlet of the Joint Strike Fighter Tested at Low Speeds

NASA Technical Reports Server (NTRS)

Johns, Albert L.

1998-01-01

As part of a national cooperative effort to develop a multinational fighter aircraft, a model of a Joint Strike Fighter concept was tested in several NASA Lewis Research Center wind tunnels at low speeds over a range of headwind velocities and model attitudes. This Joint Strike Fighter concept, which is scheduled to go into production in 2005, will greatly improve the range, capability, maneuverability, and survivability of fighter aircraft, and the production program could ultimately be worth $100 billion. The test program was a team effort between Lewis and Lockheed Martin Tactical Aircraft Systems. Testing was completed in September 1997, several weeks ahead of schedule, allowing Lockheed additional time to review the results and analysis data before the next test and resulting in significant cost savings for Lockheed. Several major milestones related to dynamic and steady-state data acquisition and overall model performance were reached during this model test. Results from this program will contribute to both the concept demonstration phase and the production aircraft.

Hierarchical Ada robot programming system (HARPS)- A complete and working telerobot control system based on the NASREM model

NASA Technical Reports Server (NTRS)

Leake, Stephen; Green, Tom; Cofer, Sue; Sauerwein, Tim

1989-01-01

HARPS is a telerobot control system that can perform some simple but useful tasks. This capability is demonstrated by performing the ORU exchange demonstration. HARPS is based on NASREM (NASA Standard Reference Model). All software is developed in Ada, and the project incorporates a number of different CASE (computer-aided software engineering) tools. NASREM was found to be a valid and useful model for building a telerobot control system. Its hierarchical and distributed structure creates a natural and logical flow for implementing large complex robust control systems. The ability of Ada to create and enforce abstraction enhanced the implementation of such control systems.

Building Sustainable Professional Development Programs: Applying Strategies From Implementation Science to Translate Evidence Into Practice.

PubMed

Baldwin, Constance D; Chandran, Latha; Gusic, Maryellen E

2017-01-01

Multisite and national professional development (PD) programs for educators are challenging to establish. Use of implementation science (IS) frameworks designed to convert evidence-based intervention methods into effective health care practice may help PD developers translate proven educational methods and models into successful, well-run programs. Implementation of the national Educational Scholars Program (ESP) is used to illustrate the value of the IS model. Four adaptable elements of IS are described: (1) replication of an evidence-based model, (2) systematic stages of implementation, (3) management of implementation using three implementation drivers, and (4) demonstration of program success through measures of fidelity to proven models and sustainability. Implementation of the ESP was grounded on five established principles and methods for successful PD. The process was conducted in four IS stages over 10 years: Exploration, Installation, Initial Implementation, and Full Implementation. To ensure effective and efficient processes, attention to IS implementation drivers helped to manage organizational relationships, build competence in faculty and scholars, and address leadership challenges. We describe the ESP's fidelity to evidence-based structures and methods, and offer three examples of sustainability efforts that enabled achievement of targeted program outcomes, including academic productivity, strong networking, and career advancement of scholars. Application of IS frameworks to program implementation may help other PD programs to translate evidence-based methods into interventions with enhanced impact. A PD program can follow systematic developmental stages and be operationalized by practical implementation drivers, thereby creating successful and sustainable interventions that promote the academic vitality of health professions educators.

Economic assessment of home-based COPD management programs.

PubMed

Liu, Sheena Xin; Lee, Michael C; Atakhorrami, Maryam; Tatousek, Jan; McCormack, Meredith; Yung, Rex; Hart, Nicholas; White, David P

2013-12-01

Home-based exacerbation management programs have been proposed as an approach to reducing the clinical and financial burden of COPD. We demonstrate a framework to evaluate such programs in order to guide program design and performance decisions towards optimizing cost and clinical outcomes. This study models the impact of hypothetical exacerbation management programs through probabilistic Markov simulations. Patients were stratified by risk using exacerbation rates from the ECLIPSE study and expert opinion. Three scenarios were modeled, using base, worst and best case parameters to suggest potential telehealth program performance. In these scenarios, acute exacerbations could be detected early, with sensitivity and specificity ranging from 60-90%. Detected acute exacerbations could be diverted to either a sub-acute pathway (12.5-50% probability), thus entirely avoiding hospitalization, or a lower cost pathway through length-of-stay reduction (14-28% reduction). For a cohort of patients without prior hospitalization, the base case telehealth scenario results in a cumulative per-patient lifetime savings of $2.9 K over ≈ 12 years. For a higher risk cohort of patients with a prior admission and 1 to 2 acute exacerbations per year, a cumulative $16K per patient was saved during the remaining ≈ 3 life-years. Acceptable prices for home-based exacerbation detection testing were highly dependent on patient risk and scenario, but ranged from $290-$1263 per month for the highest risk groups. These results suggest the economic viability of exacerbation management programs and highlight the importance of risk stratification in such programs. The presented model can further be adapted to model specific programs as trial data becomes available.

Obesity-Linked Mouse Models of Liver Cancer | Center for Cancer Research

Cancer.gov

Jimmy Stauffer, Ph.D., and colleagues working with Robert  Wiltrout, Ph.D., in CCR’s Cancer and Inflammation Program, along with collaborators in the Laboratory of Human Carcinogenesis, have developed a novel mouse model that demonstrates how fat-producing phenotypes can influence the development of hepatic cancer.   The team recently reported their findings in Cancer Research.

NEAMS update quarterly report for January - March 2012.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Bradley, K.S.; Hayes, S.; Pointer, D.

Quarterly highlights are: (1) The integration of Denovo and AMP was demonstrated in an AMP simulation of the thermo-mechanics of a complete fuel assembly; (2) Bison was enhanced with a mechanistic fuel cracking model; (3) Mechanistic algorithms were incorporated into various lower-length-scale models to represent fission gases and dislocations in UO2 fuels; (4) Marmot was improved to allow faster testing of mesoscale models using larger problem domains; (5) Component models of reactor piping were developed for use in Relap-7; (6) The mesh generator of Proteus was updated to accept a mesh specification from Moose and equations were formulated for themore » intermediate-fidelity Proteus-2D1D module; (7) A new pressure solver was implemented in Nek5000 and demonstrated to work 2.5 times faster than the previous solver; (8) Work continued on volume-holdup models for two fuel reprocessing operations: voloxidation and dissolution; (9) Progress was made on a pyroprocessing model and the characterization of pyroprocessing emission signatures; (10) A new 1D groundwater waste transport code was delivered to the used fuel disposition (UFD) campaign; (11) Efforts on waste form modeling included empirical simulation of sodium-borosilicate glass compositions; (12) The Waste team developed three prototypes for modeling hydride reorientation in fuel cladding during very long-term fuel storage; (13) A benchmark demonstration problem (fission gas bubble growth) was modeled to evaluate the capabilities of different meso-scale numerical methods; (14) Work continued on a hierarchical up-scaling framework to model structural materials by directly coupling dislocation dynamics and crystal plasticity; (15) New 'importance sampling' methods were developed and demonstrated to reduce the computational cost of rare-event inference; (16) The survey and evaluation of existing data and knowledge bases was updated for NE-KAMS; (17) The NEAMS Early User Program was launched; (18) The Nuclear Regulatory Commission (NRC) Office of Regulatory Research was introduced to the NEAMS program; (19) The NEAMS overall software quality assurance plan (SQAP) was revised to version 1.5; and (20) Work continued on NiCE and its plug-ins and other utilities, such as Cubit and VisIt.« less

The Ecological Areawide Management (TEAM) of leafy spurge program of the United States Department of Agriculture-Agricultural Research Service.

PubMed

Anderson, Gerald L; Prosser, Chad W; Wendel, Lloyd E; Delfosse, Ernest S; Faust, Robert M

2003-01-01

The Ecological Areawide Management (TEAM) of Leafy Spurge program was developed to focus research and control efforts on a single weed, leafy spurge, and demonstrate the effectiveness of a coordinated, biologically based, integrated pest management program (IPM). This was accomplished through partnerships and teamwork that clearly demonstrated the advantages of the biologically based IPM approach. However, the success of regional weed control programs horizontally across several states and provinces also requires a vertical integration of several sectors of society. Awareness and education are the essential elements of vertical integration. Therefore, a substantial effort was made to produce a wide variety of information products specifically designed to educate different segments of society. During its tenure, land managers and agency decision makers have seen the potential of using the TEAM approach to accelerate the regional control of leafy spurge. The example set by the TEAM organization and participants is viewed as a model for future weed-control efforts.

A case study in innovative outreach--combining training, research, and technology transfer to address real-world problems.

PubMed Central

Chang, D P

1998-01-01

Outreach, training, technology transfer, and research are often treated as programmatically distinct activities. The interdisciplinary and applied aspects of the Superfund Basic Research Program offer an opportunity to explore different models. A case study is presented that describes a collaborative outreach effort that combines all of the above. It involves the University of California's Davis and Berkeley program projects, the University of California Systemwide Toxic Substances Research and Teaching Program, the U.S. Navy's civilian workforce at the former Mare Island Naval Shipyard, Vallejo, California (MINSY), a Department of Defense (DoD) Environmental Education Demonstration Grant program, and the Private Industry Council of Napa and Sonoma counties in California. The effort applied a Superfund-developed technology to a combined waste, radium and polychlorinated biphenyl contamination, stemming from a problematic removal action at an installation/restoration site at MINSY. The effort demonstrates that opportunities for similar collaborations are possible at DoD installations. PMID:9703494

New solution decomposition and minimization schemes for Poisson-Boltzmann equation in calculation of biomolecular electrostatics

NASA Astrophysics Data System (ADS)

Xie, Dexuan

2014-10-01

The Poisson-Boltzmann equation (PBE) is one widely-used implicit solvent continuum model in the calculation of electrostatic potential energy for biomolecules in ionic solvent, but its numerical solution remains a challenge due to its strong singularity and nonlinearity caused by its singular distribution source terms and exponential nonlinear terms. To effectively deal with such a challenge, in this paper, new solution decomposition and minimization schemes are proposed, together with a new PBE analysis on solution existence and uniqueness. Moreover, a PBE finite element program package is developed in Python based on the FEniCS program library and GAMer, a molecular surface and volumetric mesh generation program package. Numerical tests on proteins and a nonlinear Born ball model with an analytical solution validate the new solution decomposition and minimization schemes, and demonstrate the effectiveness and efficiency of the new PBE finite element program package.

A model for improving the health and quality of life of single mothers in the developing world.

PubMed

Mainthia, Rajshri; Reppart, Laura; Reppart, Jim; Pearce, Elizabeth C; Cohen, Jordan J; Netterville, James L

2013-12-01

Among the impoverished population of coastal Kenya, there is a rapidly growing group of young single mothers who suffer from adverse health outcomes, incomplete schooling, social ostracism by their communities, and economic hardship. To address this problem, in 2008 the Single Mothers Program (SMP) selected a group of vulnerable single mothers, provided them with basic relief and education, equipped them with training and start-up capital to run their own businesses, and assessed the impact of the program via a pre- and post-implementation survey. After two years in the program, a majority of the single mothers increased their contraceptive use, increased their degree of literacy, increased their individual incomes, and were more positively perceived by their communities. This study demonstrates a program model that can be used to improve the health and quality of life of single mothers and their children in similar communities throughout the world.

Selenide isotope generator for the Galileo mission. SIG/Galileo contract compliance power prediction technique

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hammel, T.E.; Srinivas, V.

1978-11-01

This initial definition of the power degradation prediction technique outlines a model for predicting SIG/Galileo mean EOM power using component test data and data from a module power degradation demonstration test program. (LCL)

Programs for analysis and resizing of complex structures. [computerized minimum weight design

NASA Technical Reports Server (NTRS)

Haftka, R. T.; Prasad, B.

1978-01-01

The paper describes the PARS (Programs for Analysis and Resizing of Structures) system. PARS is a user oriented system of programs for the minimum weight design of structures modeled by finite elements and subject to stress, displacement, flutter and thermal constraints. The system is built around SPAR - an efficient and modular general purpose finite element program, and consists of a series of processors that communicate through the use of a data base. An efficient optimizer based on the Sequence of Unconstrained Minimization Technique (SUMT) with an extended interior penalty function and Newton's method is used. Several problems are presented for demonstration of the system capabilities.

Genetic programming over context-free languages with linear constraints for the knapsack problem: first results.

PubMed

Bruhn, Peter; Geyer-Schulz, Andreas

2002-01-01

In this paper, we introduce genetic programming over context-free languages with linear constraints for combinatorial optimization, apply this method to several variants of the multidimensional knapsack problem, and discuss its performance relative to Michalewicz's genetic algorithm with penalty functions. With respect to Michalewicz's approach, we demonstrate that genetic programming over context-free languages with linear constraints improves convergence. A final result is that genetic programming over context-free languages with linear constraints is ideally suited to modeling complementarities between items in a knapsack problem: The more complementarities in the problem, the stronger the performance in comparison to its competitors.

A FEniCS-based programming framework for modeling turbulent flow by the Reynolds-averaged Navier-Stokes equations

NASA Astrophysics Data System (ADS)

Mortensen, Mikael; Langtangen, Hans Petter; Wells, Garth N.

2011-09-01

Finding an appropriate turbulence model for a given flow case usually calls for extensive experimentation with both models and numerical solution methods. This work presents the design and implementation of a flexible, programmable software framework for assisting with numerical experiments in computational turbulence. The framework targets Reynolds-averaged Navier-Stokes models, discretized by finite element methods. The novel implementation makes use of Python and the FEniCS package, the combination of which leads to compact and reusable code, where model- and solver-specific code resemble closely the mathematical formulation of equations and algorithms. The presented ideas and programming techniques are also applicable to other fields that involve systems of nonlinear partial differential equations. We demonstrate the framework in two applications and investigate the impact of various linearizations on the convergence properties of nonlinear solvers for a Reynolds-averaged Navier-Stokes model.

RAD-ADAPT: Software for modelling clonogenic assay data in radiation biology.

PubMed

Zhang, Yaping; Hu, Kaiqiang; Beumer, Jan H; Bakkenist, Christopher J; D'Argenio, David Z

2017-04-01

We present a comprehensive software program, RAD-ADAPT, for the quantitative analysis of clonogenic assays in radiation biology. Two commonly used models for clonogenic assay analysis, the linear-quadratic model and single-hit multi-target model, are included in the software. RAD-ADAPT uses maximum likelihood estimation method to obtain parameter estimates with the assumption that cell colony count data follow a Poisson distribution. The program has an intuitive interface, generates model prediction plots, tabulates model parameter estimates, and allows automatic statistical comparison of parameters between different groups. The RAD-ADAPT interface is written using the statistical software R and the underlying computations are accomplished by the ADAPT software system for pharmacokinetic/pharmacodynamic systems analysis. The use of RAD-ADAPT is demonstrated using an example that examines the impact of pharmacologic ATM and ATR kinase inhibition on human lung cancer cell line A549 after ionizing radiation. Copyright © 2017 Elsevier B.V. All rights reserved.

Using logic models in a community-based agricultural injury prevention project.

PubMed

Helitzer, Deborah; Willging, Cathleen; Hathorn, Gary; Benally, Jeannie

2009-01-01

The National Institute for Occupational Safety and Health has long promoted the logic model as a useful tool in an evaluator's portfolio. Because a logic model supports a systematic approach to designing interventions, it is equally useful for program planners. Undertaken with community stakeholders, a logic model process articulates the underlying foundations of a particular programmatic effort and enhances program design and evaluation. Most often presented as sequenced diagrams or flow charts, logic models demonstrate relationships among the following components: statement of a problem, various causal and mitigating factors related to that problem, available resources to address the problem, theoretical foundations of the selected intervention, intervention goals and planned activities, and anticipated short- and long-term outcomes. This article describes a case example of how a logic model process was used to help community stakeholders on the Navajo Nation conceive, design, implement, and evaluate agricultural injury prevention projects.

Data Programming: Creating Large Training Sets, Quickly.

PubMed

Ratner, Alexander; De Sa, Christopher; Wu, Sen; Selsam, Daniel; Ré, Christopher

2016-12-01

Large labeled training sets are the critical building blocks of supervised learning methods and are key enablers of deep learning techniques. For some applications, creating labeled training sets is the most time-consuming and expensive part of applying machine learning. We therefore propose a paradigm for the programmatic creation of training sets called data programming in which users express weak supervision strategies or domain heuristics as labeling functions , which are programs that label subsets of the data, but that are noisy and may conflict. We show that by explicitly representing this training set labeling process as a generative model, we can "denoise" the generated training set, and establish theoretically that we can recover the parameters of these generative models in a handful of settings. We then show how to modify a discriminative loss function to make it noise-aware, and demonstrate our method over a range of discriminative models including logistic regression and LSTMs. Experimentally, on the 2014 TAC-KBP Slot Filling challenge, we show that data programming would have led to a new winning score, and also show that applying data programming to an LSTM model leads to a TAC-KBP score almost 6 F1 points over a state-of-the-art LSTM baseline (and into second place in the competition). Additionally, in initial user studies we observed that data programming may be an easier way for non-experts to create machine learning models when training data is limited or unavailable.

Data Programming: Creating Large Training Sets, Quickly

PubMed Central

Ratner, Alexander; De Sa, Christopher; Wu, Sen; Selsam, Daniel; Ré, Christopher

2018-01-01

Large labeled training sets are the critical building blocks of supervised learning methods and are key enablers of deep learning techniques. For some applications, creating labeled training sets is the most time-consuming and expensive part of applying machine learning. We therefore propose a paradigm for the programmatic creation of training sets called data programming in which users express weak supervision strategies or domain heuristics as labeling functions, which are programs that label subsets of the data, but that are noisy and may conflict. We show that by explicitly representing this training set labeling process as a generative model, we can “denoise” the generated training set, and establish theoretically that we can recover the parameters of these generative models in a handful of settings. We then show how to modify a discriminative loss function to make it noise-aware, and demonstrate our method over a range of discriminative models including logistic regression and LSTMs. Experimentally, on the 2014 TAC-KBP Slot Filling challenge, we show that data programming would have led to a new winning score, and also show that applying data programming to an LSTM model leads to a TAC-KBP score almost 6 F1 points over a state-of-the-art LSTM baseline (and into second place in the competition). Additionally, in initial user studies we observed that data programming may be an easier way for non-experts to create machine learning models when training data is limited or unavailable. PMID:29872252

Ultramicrowave communications system, phase 3

NASA Technical Reports Server (NTRS)

1981-01-01

The ultramicrowave communications system program investigated the feasibility of a solid state system that meets the projected space to space requirements, while using the advantages of the 100 to 200 GHz band. The program successfully demonstrated a laboratory model of a high frequency communications system operating between 100 to 200 GHz. In the process, vendor claims for performance specifications of discrete components were evaluated, and a window was provided into system design and integration problems.

Magnetic cleanliness verification approach on tethered satellite

NASA Technical Reports Server (NTRS)

Messidoro, Piero; Braghin, Massimo; Grande, Maurizio

1990-01-01

Magnetic cleanliness testing was performed on the Tethered Satellite as the last step of an articulated verification campaign aimed at demonstrating the capability of the satellite to support its TEMAG (TEthered MAgnetometer) experiment. Tests at unit level and analytical predictions/correlations using a dedicated mathematical model (GANEW program) are also part of the verification activities. Details of the tests are presented, and the results of the verification are described together with recommendations for later programs.

Blockmodeling and the Estimation of Evolutionary Architectural Growth in Major Defense Acquisition Programs

DTIC Science & Technology

2016-04-30

Dabkowski, and Dixit (2015), we demonstrate that the DoDAF models required pre–MS A map to 14 of the 18 parameters of the Constructive Systems...engineering effort in complex systems. Saarbrücken, Germany: VDM Verlag. Valerdi, R., Dabkowski, M., & Dixit , I. (2015). Reliability improvement of...R., Dabkowski, M., & Dixit , I. (2015). Reliability Improvement of Major Defense Acquisition Program Cost Estimates – Mapping DoDAF to COSYSMO

Defense Small Business Innovation Research Program (SBIR). Program Solicitation Number 89.1. FY-1989

DTIC Science & Technology

1989-01-06

scale testing, such as plasma-arc and oxyacetylene torch test are performed. However, correlations to relate ablation rate from these test data to...helicopter rotor. In phase II, the contractor should construct and demonstrate a working model. 36 A89-010 TITLE: Smooth, Erosion Resistant Coatings ...for Organic Matrix Composites OBJECTIVE: Erosion Resistant Coatings for Organic Matrix Composites for use in Compressor Section of Future Gas Turbine

A new software tool for computing Earth's atmospheric transmission of near- and far-infrared radiation

NASA Technical Reports Server (NTRS)

Lord, Steven D.

1992-01-01

This report describes a new software tool, ATRAN, which computes the transmittance of Earth's atmosphere at near- and far-infrared wavelengths. We compare the capabilities of this program with others currently available and demonstrate its utility for observational data calibration and reduction. The program employs current water-vapor and ozone models to produce fast and accurate transmittance spectra for wavelengths ranging from 0.8 microns to 10 mm.

Bridging the Technology Readiness "Valley of Death" Utilizing Nanosats

NASA Technical Reports Server (NTRS)

Bauer, Robert A.; Millar, Pamela S.; Norton, Charles D.

2015-01-01

Incorporating new technology is a hallmark of space missions. Missions demand ever-improving tools and techniques to allow them to meet the mission science requirements. In Earth Science, these technologies are normally expressed in new instrument capabilities that can enable new measurement concepts, extended capabilities of existing measurement techniques, or totally new detection capabilities, and also, information systems technologies that can enhance data analysis or enable new data analyses to advance modeling and prediction capabilities. Incorporating new technologies has never been easy. There is a large development step beyond demonstration in a laboratory or on an airborne platform to the eventual space environment that is sometimes referred to as the "technology valley of death." Studies have shown that non-validated technology is a primary cause of NASA and DoD mission delays and cost overruns. With the demise of the New Millennium Program within NASA, opportunities for demonstrating technologies in space have been rare. Many technologies are suitable for a flight project after only ground testing. However, some require validation in a relevant or a space flight environment, which cannot be fully tested on the ground or in airborne systems. NASA's Earth Science Technology Program has initiated a nimble program to provide a fairly rapid turn-around of space validated technologies, and thereby reducing future mission risk in incorporating new technologies. The program, called In-Space Validation of Earth Science Technology (InVEST), now has five tasks in development. Each are 3U CubeSats and they are targeted for launch opportunities in the 2016 time period. Prior to formalizing an InVEST program, the technology program office was asked to demonstrate how the program would work and what sort of technologies could benefit from space validation. Three projects were developed and launched, and have demonstrated the technologies that they set out to validate. This paper will provide a brief status of the pre-InVEST CubeSats, and discuss the development and status of the InVEST program. Figure

The Ergonomic Program Implementation Continuum (EPIC): integration of health and safety--a process evaluation in the healthcare sector.

PubMed

Baumann, Andrea; Holness, D Linn; Norman, Patrica; Idriss-Wheeler, Dina; Boucher, Patricia

2012-07-01

This article presents a health and safety intervention model and the use of process evaluation to assess a participatory ergonomic intervention. The effectiveness of the Ergonomic Program Implementation Continuum (EPIC) was assessed at six healthcare pilot sites in Ontario, Canada. The model provided a framework to demonstrate evaluation findings. Participants reported that EPIC was thorough and identified improvements related to its use. Participants believed the program contributed to advancing an organizational culture of safety (COS). Main barriers to program uptake included resistance to change and need for adequate funding and resources. The dedication of organizational leaders and consultant coaches was identified as essential to the program's success. In terms of impact on industry, findings contribute to the evidence-based knowledge of health and safety interventions and support use of the framework for creating a robust infrastructure to advance organizational COS and link staff safety and wellness with patient safety in healthcare. Copyright © 2012 National Safety Council and Elsevier Ltd. All rights reserved.

Advanced ultrasound training for fourth-year medical students: a novel training program at The Ohio State University College of Medicine.

PubMed

Bahner, David P; Royall, Nelson A

2013-02-01

Ultrasound training and education in medical schools is rare, and the foci of current ultrasound curricula are limited. There is a significant need for advanced ultrasound training models in medical school curricula to reduce educational burdens for physician residency programs and improve overall physician competency.The authors describe and evaluate the advanced ultrasound training program developed at The Ohio State University College of Medicine (OSU COM). The OSU COM program is a longitudinal advanced ultrasound curriculum for fourth-year medical students pursuing specialties that require frequent use of focused ultrasound. One hundred fifty student participants have completed the yearlong program to date. Participants engage in didactic lectures, journal club sessions, hands-on training, teaching and patient-modeling activities, and complete a final project. Experienced Ohio State University Medical Center faculty are recruited from specialties that frequently use ultrasound (e.g., emergency medicine, internal medicine, obstetrics-gynecology). A multimodal instructional assessment approach ensures that ultrasound training yields experience with cognitive, behavioral, and constructive learning components. The authors discuss the benefits of the program as well as its challenges and future directions.The advanced ultrasound training program at OSU COM demonstrates a novel approach to providing ultrasound training for medical students, offering a feasible model for meeting training guidelines without increasing the educational requirements for residency programs.

Documentation of a Regional Aquifer Simulation Model RAQSIM, and a description of support programs applied in the Twin Platte - Middle Republican Study Area, Nebraska

USGS Publications Warehouse

Cady, R.E.; Peckenpaugh, J.M.

1985-01-01

RAQSIM, a generalized flow model of a groundwater system using finite-element methods, is documented to explain how it works and to demonstrate that it gives valid results. Three support programs that are used to compute recharge and discharge data required as input to RAQSIM are described. RAQSIM was developed to solve transient, two-dimensional, regional groundwater flow problems with isotropic or anisotropic conductance. The model can also simulate radially-symmetric flow to a well and steady-state flow. The mathematical basis, program structure, data input and output procedures, organization of data sets, and program features and options of RAQSIM are discussed. An example , containing listings of data and results and illustrating RAQSIM 's capabilities, is discussed in detail. Two test problems also are discussed comparing RAQSIM 's results with analytical procedures. The first support program described, the PET Program, uses solar radiation and other climatic data in the Jensen-Haise method to compute potential evapotranspiration. The second support program, the Soil-Water Program, uses output from the PET Program, soil characteristics, and the ratio of potential to actual evapotranspiration for each crop to compute infiltration, storage, and removal of water from the soil zone. The third program, the Recharge-Discharge Program, uses output from the Soil-Water Program together with other data to compute recharge and discharge from the groundwater flow system. For each support program, a program listing and examples of the data and results for the Twin Platte-Middle Republican study are provided. In addition, a brief discussion on how each program operates and on procedures for running and modifying these programs are presented. (Author 's abstract)

Bi-national cross-validation of an evidence-based conduct problem prevention model.

PubMed

Porta, Carolyn M; Bloomquist, Michael L; Garcia-Huidobro, Diego; Gutiérrez, Rafael; Vega, Leticia; Balch, Rosita; Yu, Xiaohui; Cooper, Daniel K

2018-04-01

To (a) explore the preferences of Mexican parents and Spanish-speaking professionals working with migrant Latino families in Minnesota regarding the Mexican-adapted brief model versus the original conduct problems intervention and (b) identifying the potential challenges, and preferred solutions, to implementation of a conduct problems preventive intervention. The core practice elements of a conduct problems prevention program originating in the United States were adapted for prevention efforts in Mexico. Three focus groups were conducted in the United States, with Latino parents (n = 24; 2 focus groups) and professionals serving Latino families (n = 9; 1 focus group), to compare and discuss the Mexican-adapted model and the original conduct problems prevention program. Thematic analysis was conducted on the verbatim focus group transcripts in the original language spoken. Participants preferred the Mexican-adapted model. The following key areas were identified for cultural adaptation when delivering a conduct problems prevention program with Latino families: recruitment/enrollment strategies, program delivery format, and program content (i.e., child skills training, parent skills training, child-parent activities, and child-parent support). For both models, strengths, concerns, barriers, and strategies for overcoming concerns and barriers were identified. We summarize recommendations offered by participants to strengthen the effective implementation of a conduct problems prevention model with Latino families in the United States. This project demonstrates the strength in binational collaboration to critically examine cultural adaptations of evidence-based prevention programs that could be useful to diverse communities, families, and youth in other settings. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Casemix and rehabilitation: evaluation of an early discharge scheme.

PubMed

Brandis, S

2000-01-01

This paper presents a case study of an early discharge scheme funded by casemix incentives and discusses limitations of a casemix model of funding whereby hospital inpatient care is funded separately from care in other settings. The POSITIVE Rehabilitation program received 151 patients discharged early from hospital in a twelve-month period. Program evaluation demonstrates a 40.9% drop in the average length of stay of rehabilitation patients and a 42.6% drop in average length of stay for patients with stroke. Other benefits of the program include a high level of patient satisfaction, improved carer support and increased continuity of care. The challenge under the Australian interpretation of a casemix model of funding is ensuring the viability of services that extend across acute hospital, non-acute care, and community and home settings.

Fabrication and Assembly Performance of the First 4.2 m MQXFA Magnet and Mechanical Model for the Hi-Lumi LHC Upgrade

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cheng, Daniel W.; Ambrosio, Giorgio; Anderssen, Eric C.

Here, the LHC accelerator research program (LARP), in collaboration with CERN and under the scope of the high luminosity upgrade of the Large Hadron Collider, is in the prototyping stage in the development of a 150 mm aperture high-field Nb 3Sn quadrupole magnet called MQXF. This magnet is mechanically supported using a shell-based support structure, which has been extensively demonstrated on several R&D models within LARP, as well as in the more recent short (1.2 m magnetic length) MQXF model program. The MQXFA magnets are each 4.2 m magnetic length, and the first mechanical long model, MQXFA1M (using aluminum surrogatemore » coils), and MQXFAP1 prototype magnet (the first prototype with Nb 3Sn coils) have been assembled at the LBNL. In this paper, we summarize the tooling and the assembly processes, and discuss the mechanical performance of these first two assemblies, comparing strain gauge data with finite element model analysis, as well as the near-term plans for the long MQXF magnet program.« less

Fabrication and Assembly Performance of the First 4.2 m MQXFA Magnet and Mechanical Model for the Hi-Lumi LHC Upgrade

DOE PAGES

Cheng, Daniel W.; Ambrosio, Giorgio; Anderssen, Eric C.; ...

2018-01-30

Here, the LHC accelerator research program (LARP), in collaboration with CERN and under the scope of the high luminosity upgrade of the Large Hadron Collider, is in the prototyping stage in the development of a 150 mm aperture high-field Nb 3Sn quadrupole magnet called MQXF. This magnet is mechanically supported using a shell-based support structure, which has been extensively demonstrated on several R&D models within LARP, as well as in the more recent short (1.2 m magnetic length) MQXF model program. The MQXFA magnets are each 4.2 m magnetic length, and the first mechanical long model, MQXFA1M (using aluminum surrogatemore » coils), and MQXFAP1 prototype magnet (the first prototype with Nb 3Sn coils) have been assembled at the LBNL. In this paper, we summarize the tooling and the assembly processes, and discuss the mechanical performance of these first two assemblies, comparing strain gauge data with finite element model analysis, as well as the near-term plans for the long MQXF magnet program.« less

Multi-Objective Programming for Lot-Sizing with Quantity Discount

NASA Astrophysics Data System (ADS)

Kang, He-Yau; Lee, Amy H. I.; Lai, Chun-Mei; Kang, Mei-Sung

2011-11-01

Multi-objective programming (MOP) is one of the popular methods for decision making in a complex environment. In a MOP, decision makers try to optimize two or more objectives simultaneously under various constraints. A complete optimal solution seldom exists, and a Pareto-optimal solution is usually used. Some methods, such as the weighting method which assigns priorities to the objectives and sets aspiration levels for the objectives, are used to derive a compromise solution. The ɛ-constraint method is a modified weight method. One of the objective functions is optimized while the other objective functions are treated as constraints and are incorporated in the constraint part of the model. This research considers a stochastic lot-sizing problem with multi-suppliers and quantity discounts. The model is transformed into a mixed integer programming (MIP) model next based on the ɛ-constraint method. An illustrative example is used to illustrate the practicality of the proposed model. The results demonstrate that the model is an effective and accurate tool for determining the replenishment of a manufacturer from multiple suppliers for multi-periods.

An abstract model of rogue code insertion into radio frequency wireless networks. The effects of computer viruses on the Program Management Office

NASA Astrophysics Data System (ADS)

Feudo, Christopher V.

1994-04-01

This dissertation demonstrates that inadequately protected wireless LANs are more vulnerable to rogue program attack than traditional LANs. Wireless LANs not only run the same risks as traditional LANs, but they also run additional risks associated with an open transmission medium. Intruders can scan radio waves and, given enough time and resources, intercept, analyze, decipher, and reinsert data into the transmission medium. This dissertation describes the development and instantiation of an abstract model of the rogue code insertion process into a DOS-based wireless communications system using radio frequency (RF) atmospheric signal transmission. The model is general enough to be applied to widely used target environments such as UNIX, Macintosh, and DOS operating systems. The methodology and three modules, the prober, activator, and trigger modules, to generate rogue code and insert it into a wireless LAN were developed to illustrate the efficacy of the model. Also incorporated into the model are defense measures against remotely introduced rogue programs and a cost-benefit analysis that determined that such defenses for a specific environment were cost-justified.

An integrated user-friendly ArcMAP tool for bivariate statistical modeling in geoscience applications

NASA Astrophysics Data System (ADS)

Jebur, M. N.; Pradhan, B.; Shafri, H. Z. M.; Yusof, Z.; Tehrany, M. S.

2014-10-01

Modeling and classification difficulties are fundamental issues in natural hazard assessment. A geographic information system (GIS) is a domain that requires users to use various tools to perform different types of spatial modeling. Bivariate statistical analysis (BSA) assists in hazard modeling. To perform this analysis, several calculations are required and the user has to transfer data from one format to another. Most researchers perform these calculations manually by using Microsoft Excel or other programs. This process is time consuming and carries a degree of uncertainty. The lack of proper tools to implement BSA in a GIS environment prompted this study. In this paper, a user-friendly tool, BSM (bivariate statistical modeler), for BSA technique is proposed. Three popular BSA techniques such as frequency ratio, weights-of-evidence, and evidential belief function models are applied in the newly proposed ArcMAP tool. This tool is programmed in Python and is created by a simple graphical user interface, which facilitates the improvement of model performance. The proposed tool implements BSA automatically, thus allowing numerous variables to be examined. To validate the capability and accuracy of this program, a pilot test area in Malaysia is selected and all three models are tested by using the proposed program. Area under curve is used to measure the success rate and prediction rate. Results demonstrate that the proposed program executes BSA with reasonable accuracy. The proposed BSA tool can be used in numerous applications, such as natural hazard, mineral potential, hydrological, and other engineering and environmental applications.

An integrated user-friendly ArcMAP tool for bivariate statistical modelling in geoscience applications

NASA Astrophysics Data System (ADS)

Jebur, M. N.; Pradhan, B.; Shafri, H. Z. M.; Yusoff, Z. M.; Tehrany, M. S.

2015-03-01

Modelling and classification difficulties are fundamental issues in natural hazard assessment. A geographic information system (GIS) is a domain that requires users to use various tools to perform different types of spatial modelling. Bivariate statistical analysis (BSA) assists in hazard modelling. To perform this analysis, several calculations are required and the user has to transfer data from one format to another. Most researchers perform these calculations manually by using Microsoft Excel or other programs. This process is time-consuming and carries a degree of uncertainty. The lack of proper tools to implement BSA in a GIS environment prompted this study. In this paper, a user-friendly tool, bivariate statistical modeler (BSM), for BSA technique is proposed. Three popular BSA techniques, such as frequency ratio, weight-of-evidence (WoE), and evidential belief function (EBF) models, are applied in the newly proposed ArcMAP tool. This tool is programmed in Python and created by a simple graphical user interface (GUI), which facilitates the improvement of model performance. The proposed tool implements BSA automatically, thus allowing numerous variables to be examined. To validate the capability and accuracy of this program, a pilot test area in Malaysia is selected and all three models are tested by using the proposed program. Area under curve (AUC) is used to measure the success rate and prediction rate. Results demonstrate that the proposed program executes BSA with reasonable accuracy. The proposed BSA tool can be used in numerous applications, such as natural hazard, mineral potential, hydrological, and other engineering and environmental applications.

Learning Probabilistic Logic Models from Probabilistic Examples

PubMed Central

Chen, Jianzhong; Muggleton, Stephen; Santos, José

2009-01-01

Abstract We revisit an application developed originally using abductive Inductive Logic Programming (ILP) for modeling inhibition in metabolic networks. The example data was derived from studies of the effects of toxins on rats using Nuclear Magnetic Resonance (NMR) time-trace analysis of their biofluids together with background knowledge representing a subset of the Kyoto Encyclopedia of Genes and Genomes (KEGG). We now apply two Probabilistic ILP (PILP) approaches - abductive Stochastic Logic Programs (SLPs) and PRogramming In Statistical modeling (PRISM) to the application. Both approaches support abductive learning and probability predictions. Abductive SLPs are a PILP framework that provides possible worlds semantics to SLPs through abduction. Instead of learning logic models from non-probabilistic examples as done in ILP, the PILP approach applied in this paper is based on a general technique for introducing probability labels within a standard scientific experimental setting involving control and treated data. Our results demonstrate that the PILP approach provides a way of learning probabilistic logic models from probabilistic examples, and the PILP models learned from probabilistic examples lead to a significant decrease in error accompanied by improved insight from the learned results compared with the PILP models learned from non-probabilistic examples. PMID:19888348

Learning Probabilistic Logic Models from Probabilistic Examples.

PubMed

Chen, Jianzhong; Muggleton, Stephen; Santos, José

2008-10-01

We revisit an application developed originally using abductive Inductive Logic Programming (ILP) for modeling inhibition in metabolic networks. The example data was derived from studies of the effects of toxins on rats using Nuclear Magnetic Resonance (NMR) time-trace analysis of their biofluids together with background knowledge representing a subset of the Kyoto Encyclopedia of Genes and Genomes (KEGG). We now apply two Probabilistic ILP (PILP) approaches - abductive Stochastic Logic Programs (SLPs) and PRogramming In Statistical modeling (PRISM) to the application. Both approaches support abductive learning and probability predictions. Abductive SLPs are a PILP framework that provides possible worlds semantics to SLPs through abduction. Instead of learning logic models from non-probabilistic examples as done in ILP, the PILP approach applied in this paper is based on a general technique for introducing probability labels within a standard scientific experimental setting involving control and treated data. Our results demonstrate that the PILP approach provides a way of learning probabilistic logic models from probabilistic examples, and the PILP models learned from probabilistic examples lead to a significant decrease in error accompanied by improved insight from the learned results compared with the PILP models learned from non-probabilistic examples.

Development of an energy storage tank model

NASA Astrophysics Data System (ADS)

Buckley, Robert Christopher

A linearized, one-dimensional finite difference model employing an implicit finite difference method for energy storage tanks is developed, programmed with MATLAB, and demonstrated for different applications. A set of nodal energy equations is developed by considering the energy interactions on a small control volume. The general method of solving these equations is described as are other features of the simulation program. Two modeling applications are presented: the first using a hot water storage tank with a solar collector and an absorption chiller to cool a building in the summer, the second using a molten salt storage system with a solar collector and steam power plant to generate electricity. Recommendations for further study as well as all of the source code generated in the project are also provided.

Numerical Modeling of Propellant Boiloff in Cryogenic Storage Tank

NASA Technical Reports Server (NTRS)

Majumdar, A. K.; Steadman, T. E.; Maroney, J. L.

2007-01-01

This Technical Memorandum (TM) describes the thermal modeling effort undertaken at Marshall Space Flight Center to support the Cryogenic Test Laboratory at Kennedy Space Center (KSC) for a study of insulation materials for cryogenic tanks in order to reduce propellant boiloff during long-term storage. The Generalized Fluid System Simulation program has been used to model boiloff in 1,000-L demonstration tanks built for testing the thermal performance of glass bubbles and perlite insulation. Numerical predictions of boiloff rate and ullage temperature have been compared with the measured data from the testing of demonstration tanks. A satisfactory comparison between measured and predicted data has been observed for both liquid nitrogen and hydrogen tests. Based on the experience gained with the modeling of the demonstration tanks, a numerical model of the liquid hydrogen storage tank at launch complex 39 at KSC was built. The predicted boiloff rate of hydrogen has been found to be in good agreement with observed field data. This TM describes three different models that have been developed during this period of study (March 2005 to June 2006), comparisons with test data, and results of parametric studies.

The Public/Private Partnership behind the Cash and Counseling Demonstration and Evaluation: Its Origins, Challenges, and Unresolved Issues

PubMed Central

Knickman, James R; Stone, Robyn I

2007-01-01

objective To discuss why and how the Cash and Counseling Demonstration came to be designed, implemented, and evaluated through a partnership between the U.S. Department of Health and Human Services Office of the Assistant Secretary for Planning and Evaluation (ASPE) and the Robert Wood Johnson Foundation (RWJF). Principal Findings This public/private partnership was created by two colleagues who were motivated by the need for funding to conduct a large-scale demonstration and evaluation, the prestige that both organizations brought to the project, the ability to draw on both organizations' experience and expertise, and the potential to maximize flexibility in the design and implementation of the demonstration. The partnership, which has lasted over a decade and has supported two generations of Cash and Counseling programs, overcame several challenges including getting approval for the project through their respective bureaucracies, managing the decision making process and the ongoing program across the two organizations, dealing with leadership and staff turnover, and reaching consensus on how to apportion credit for the success of the program. Several unresolved issues remain, including how the program gets operationalized within each state, how case management is addressed within the context of a consumer-directed model like Cash and Counseling, how quality is assured in this type of program, and how the Internal Revenue Service views and treats Cash and Counseling and other consumer-directed programs. Conclusion This public/private partnership is an illustration of how public dollars can be leveraged effectively to examine a pressing policy issue and to produce information that can be translated into better policy and practice. The ASPE/RWJF collaboration made it possible to develop, test, and expand a policy-oriented demonstration project that has become a pivotal strategy in most states' efforts to build their home and community-based service systems. PMID:17244288

NSTAR Ion Thruster and Breadboard Power Processor Functional Integration Test Results

NASA Technical Reports Server (NTRS)

Hamley, John A.; Pinero, Luis R.; Rawlin, Vincent K.; Miller, John R.; Myers, Roger M.; Bowers, Glen E.

1996-01-01

A 2.3 kW Breadboard Power Processing Unit (BBPPU) was developed as part of the NASA Solar Electric Propulsion Technology Application Readiness (NSTAR) Program. The NSTAR program will deliver an electric propulsion system based on a 30 cm xenon ion thruster to the New Millennium (NM) program for use as the primary propulsion system for the initial NM flight. The final development test for the BBPPU, the Functional Integration Test, was carried out to demonstrate all aspects of BBPPU operation with an Engineering Model Thruster. Test objectives included: (1) demonstration and validation of automated thruster start procedures, (2) demonstration of stable closed loop control of the thruster beam current, (3) successful response and recovery to thruster faults, and (4) successful safing of the system during simulated spacecraft faults. These objectives were met over the specified 80-120 VDC input voltage range and 0.5-2.3 output power capability of the BBPPU. Two minor anomalies were noted in discharge and neutralizer keeper current. These anomalies did not affect the stability of the system and were successfully corrected.

HiRel: Hybrid Automated Reliability Predictor (HARP) integrated reliability tool system, (version 7.0). Volume 2: HARP tutorial

NASA Technical Reports Server (NTRS)

Rothmann, Elizabeth; Dugan, Joanne Bechta; Trivedi, Kishor S.; Mittal, Nitin; Bavuso, Salvatore J.

1994-01-01

The Hybrid Automated Reliability Predictor (HARP) integrated Reliability (HiRel) tool system for reliability/availability prediction offers a toolbox of integrated reliability/availability programs that can be used to customize the user's application in a workstation or nonworkstation environment. The Hybrid Automated Reliability Predictor (HARP) tutorial provides insight into HARP modeling techniques and the interactive textual prompting input language via a step-by-step explanation and demonstration of HARP's fault occurrence/repair model and the fault/error handling models. Example applications are worked in their entirety and the HARP tabular output data are presented for each. Simple models are presented at first with each succeeding example demonstrating greater modeling power and complexity. This document is not intended to present the theoretical and mathematical basis for HARP.

Robot vision system programmed in Prolog

NASA Astrophysics Data System (ADS)

Batchelor, Bruce G.; Hack, Ralf

1995-10-01

This is the latest in a series of publications which develop the theme of programming a machine vision system using the artificial intelligence language Prolog. The article states the long-term objective of the research program of which this work forms part. Many but not yet all of the goals laid out in this plan have already been achieved in an integrated system, which uses a multi-layer control hierarchy. The purpose of the present paper is to demonstrate that a system based upon a Prolog controller is capable of making complex decisions and operating a standard robot. The authors chose, as a vehicle for this exercise, the task of playing dominoes against a human opponent. This game was selected for this demonstration since it models a range of industrial assembly tasks, where parts are to be mated together. (For example, a 'daisy chain' of electronic equipment and the interconnecting cables/adapters may be likened to a chain of dominoes.)

The Use of a Small Private Online Course to Allow Educators to Share Teaching Resources Across Diverse Sites: The Future of Psychiatric Case Conferences?

PubMed Central

Lockhart, Billy J.; Capurso, Noah A.; Chase, Isaiah; Arbuckle, Melissa R.; Travis, Michael J.; Eisen, Jane

2017-01-01

Objective The authors sought to demonstrate the feasibility of integrating small private online course (SPOC) technology with flipped classroom techniques in order to improve neuroscience education across diverse training sites. Methods Post-graduate medical educators used SPOC web conferencing software and video technology to implement an integrated case conference and in-depth neuroscience discussion. Results Ten psychiatry training programs from across the USA and from two international sites took part in the conference. Feedback from participants was largely positive. Conclusion This pilot demonstrated the feasibility of such a program and provided a diverse audience with the opportunity to engage in an interactive learning experience with expert faculty discussants. This may be a useful model for programs with limited local expertise to expand their teaching efforts in a wide range of topics. PMID:26620806

Adaptive smart wing design for military aircraft: requirements, concepts, and payoffs

NASA Astrophysics Data System (ADS)

Kudva, Jayanth N.; Appa, Kari; Van Way, Craig B.; Lockyer, Allen J.

1995-05-01

New developments in smart structures and materials have made it possible to revisit earlier work in adaptive and flexible wing technology, and remove some of the limitations for technology transition to next-generation aircraft. Research performed by Northrop Grumman, under internal funding, has led to a new program sponsored by ARPA to investigate the application of smart structures and materials technologies to twist and adapt and aircraft wing. Conceptual designs are presented based on state-of-the-art materials, including shape memory alloys, piezoelectrics, and fiber optic sensors for incorporation in a proposed smart wing design. Plans are described to demonstrate proof-of-concept on a prototype 1/10 scale -18 model that will be tested in a wind tunnel for final validation. Highlights of the proposed program are summarized with respect to program objectives, requirements, key concept design features, demonstration testing, and smart wing technology payoffs and risks.

Pyrotechnic Shock Analysis Using Statistical Energy Analysis

DTIC Science & Technology

2015-10-23

SEA subsystems. A couple of validation examples are provided to demonstrate the new approach. KEY WORDS : Peak Ratio, phase perturbation...Ballistic Shock Prediction Models and Techniques for Use in the Crusader Combat Vehicle Program,” 11th Annual US Army Ground Vehicle Survivability

Wind energy: A renewable energy option

NASA Technical Reports Server (NTRS)

Zimmerman, J. S.

1977-01-01

Wind turbine generator research programs administered by the Energy Research and Development Administration are examined. The design and operation of turbine demonstration models are described. Wind assessments were made to determine the feasibility of using wind generated power for various parts of the country.

Prediction of Pathologic Fracture Risk in Activities of Daily Living and Rehabilitation of Patients With Metastatic Breast Carcinoma of the Pelvis and Femur

DTIC Science & Technology

2002-08-01

demonstrated in three-dimensional graphics and animations. This computer model will aid in planning of non-operative or operative management, rehabilitation regimens, nursing programs, and patient education .

Generalized Fluid System Simulation Program, Version 5.0-Educational. Supplemental Information for NASA/TM-2011-216470. Supplement

NASA Technical Reports Server (NTRS)

Majumdar, A. K.

2011-01-01

The Generalized Fluid System Simulation Program (GFSSP) is a finite-volume based general-purpose computer program for analyzing steady state and time-dependent flow rates, pressures, temperatures, and concentrations in a complex flow network. The program is capable of modeling real fluids with phase changes, compressibility, mixture thermodynamics, conjugate heat transfer between solid and fluid, fluid transients, pumps, compressors and external body forces such as gravity and centrifugal. The thermofluid system to be analyzed is discretized into nodes, branches, and conductors. The scalar properties such as pressure, temperature, and concentrations are calculated at nodes. Mass flow rates and heat transfer rates are computed in branches and conductors. The graphical user interface allows users to build their models using the point, drag and click method; the users can also run their models and post-process the results in the same environment. The integrated fluid library supplies thermodynamic and thermo-physical properties of 36 fluids and 21 different resistance/source options are provided for modeling momentum sources or sinks in the branches. This Technical Memorandum illustrates the application and verification of the code through 12 demonstrated example problems. This supplement gives the input and output data files for the examples.

Inexact nonlinear improved fuzzy chance-constrained programming model for irrigation water management under uncertainty

NASA Astrophysics Data System (ADS)

Zhang, Chenglong; Zhang, Fan; Guo, Shanshan; Liu, Xiao; Guo, Ping

2018-01-01

An inexact nonlinear mλ-measure fuzzy chance-constrained programming (INMFCCP) model is developed for irrigation water allocation under uncertainty. Techniques of inexact quadratic programming (IQP), mλ-measure, and fuzzy chance-constrained programming (FCCP) are integrated into a general optimization framework. The INMFCCP model can deal with not only nonlinearities in the objective function, but also uncertainties presented as discrete intervals in the objective function, variables and left-hand side constraints and fuzziness in the right-hand side constraints. Moreover, this model improves upon the conventional fuzzy chance-constrained programming by introducing a linear combination of possibility measure and necessity measure with varying preference parameters. To demonstrate its applicability, the model is then applied to a case study in the middle reaches of Heihe River Basin, northwest China. An interval regression analysis method is used to obtain interval crop water production functions in the whole growth period under uncertainty. Therefore, more flexible solutions can be generated for optimal irrigation water allocation. The variation of results can be examined by giving different confidence levels and preference parameters. Besides, it can reflect interrelationships among system benefits, preference parameters, confidence levels and the corresponding risk levels. Comparison between interval crop water production functions and deterministic ones based on the developed INMFCCP model indicates that the former is capable of reflecting more complexities and uncertainties in practical application. These results can provide more reliable scientific basis for supporting irrigation water management in arid areas.

Parachute Testing for the NASA X-38 Crew Return Vehicle

NASA Technical Reports Server (NTRS)

Stein, Jenny M.

2005-01-01

NASA's X-38 program was an in-house technology demonstration program to develop a Crew Return Vehicle (CRV) for the International Space Station capable of returning seven crewmembers to Earth when the Space Shuttle was not present at the station. The program, managed out of NASA's Johnson Space Center, was started in 1995 and was cancelled in 2003. Eight flights with a prototype atmospheric vehicle were successfully flown at Edwards Air Force Base, demonstrating the feasibility of a parachute landing system for spacecraft. The intensive testing conducted by the program included testing of large ram-air parafoils. The flight test techniques, instrumentation, and simulation models developed during the parachute test program culminated in the successful demonstration of a guided parafoil system to land a 25,000 Ib spacecraft. The test program utilized parafoils of sizes ranging from 750 to 7500 p. The guidance, navigation, and control system (GN&C) consisted of winches, laser or radar altimeter, global positioning system (GPS), magnetic compass, barometric altimeter, flight computer, and modems for uplink commands and downlink data. The winches were used to steer the parafoil and to perform the dynamic flare maneuver for a soft landing. The laser or radar altimeter was used to initiate the flare. In the event of a GPS failure, the software navigated by dead reckoning using the compass and barometric altimeter data. The GN&C test beds included platforms dropped from cargo aircraft, atmospheric vehicles released from a 8-52, and a Buckeye powered parachute. This paper will describe the test program and significant results.

Blade loss transient dynamics analysis, volume 1. Task 1: Survey and perspective. [aircraft gas turbine engines

NASA Technical Reports Server (NTRS)

Gallardo, V. C.; Gaffney, E. F.; Bach, L. J.; Stallone, M. J.

1981-01-01

An analytical technique was developed to predict the behavior of a rotor system subjected to sudden unbalance. The technique is implemented in the Turbine Engine Transient Rotor Analysis (TETRA) computer program using the component element method. The analysis was particularly aimed toward blade-loss phenomena in gas turbine engines. A dual-rotor, casing, and pylon structure can be modeled by the computer program. Blade tip rubs, Coriolis forces, and mechanical clearances are included. The analytical system was verified by modeling and simulating actual test conditions for a rig test as well as a full-engine, blade-release demonstration.

Mutualism in museums: A model for engaging undergraduates in biodiversity science

PubMed Central

Cicero, Carla; Albe, Monica J.; Barclay, Theresa L. W.; Spencer, Carol L.; Koo, Michelle S.; Bowie, Rauri C. K.; Lacey, Eileen A.

2017-01-01

Museums have an untapped potential to engage students in hands-on learning. Here, we describe the development of a tiered museum-based program at the University of California, Berkeley as a model for engaging undergraduates in biodiversity science. This decade-long effort to increase student participation in collections demonstrates the mutual benefits of undergraduate involvement. Museums benefit from critical help in collections care and an increased intellectual vitality, while students simultaneously gain essential research skills and an unparalleled exposure to biodiversity. Five first steps to creating a program are: dedicate a coordinator, offer credit, diversify participation, create a tiered structure, and build community. PMID:29161253

User's guide to PHREEQC (Version 2) : a computer program for speciation, batch-reaction, one-dimensional transport, and inverse geochemical calculations

USGS Publications Warehouse

Parkhurst, David L.; Appelo, C.A.J.

1999-01-01

PHREEQC version 2 is a computer program written in the C programming language that is designed to perform a wide variety of low-temperature aqueous geochemical calculations. PHREEQC is based on an ion-association aqueous model and has capabilities for (1) speciation and saturation-index calculations; (2) batch-reaction and one-dimensional (1D) transport calculations involving reversible reactions, which include aqueous, mineral, gas, solid-solution, surface-complexation, and ion-exchange equilibria, and irreversible reactions, which include specified mole transfers of reactants, kinetically controlled reactions, mixing of solutions, and temperature changes; and (3) inverse modeling, which finds sets of mineral and gas mole transfers that account for differences in composition between waters, within specified compositional uncertainty limits.New features in PHREEQC version 2 relative to version 1 include capabilities to simulate dispersion (or diffusion) and stagnant zones in 1D-transport calculations, to model kinetic reactions with user-defined rate expressions, to model the formation or dissolution of ideal, multicomponent or nonideal, binary solid solutions, to model fixed-volume gas phases in addition to fixed-pressure gas phases, to allow the number of surface or exchange sites to vary with the dissolution or precipitation of minerals or kinetic reactants, to include isotope mole balances in inverse modeling calculations, to automatically use multiple sets of convergence parameters, to print user-defined quantities to the primary output file and (or) to a file suitable for importation into a spreadsheet, and to define solution compositions in a format more compatible with spreadsheet programs. This report presents the equations that are the basis for chemical equilibrium, kinetic, transport, and inverse-modeling calculations in PHREEQC; describes the input for the program; and presents examples that demonstrate most of the program's capabilities.

[Effects of an Individual Breast-feeding Promotion Program for Married Immigrant Women].

PubMed

Park, Mi Kyoung; Moon, So Hyun

2016-02-01

This study was designed to evaluate the effects of an individual breast-feeding promotion program to address breast-feeding knowledge, attitude, method and rate of practice for married immigrant women. A non-equivalent control group quasi-experimental design was used (experimental group=16, control group=17). The intervention consisted of 3 phases: (1) Within 2 hours of delivery - individual breast-feeding training through video/verbal/practical training education and demonstration (2) After 1~2 days - group training using video, model doll, and breast models (3) After 7 days - family visit, counseling, retraining and reinforcement training. The data were analyzed using non-parametric tests with the SPSS program. Married immigrant women who participated in the individual breast-feeding program scored high in knowledge, attitude, method and rate of practice compared to the control group. The results indicate that the individual breast-feeding program is very effective in increasing breast-feeding knowledge, attitude, method and rate of practicing breast feeding for married immigrant women. So, nurses are encouraged to aggressively utilize individual breast-feeding programs to help married immigrant women, who are exposed to vulnerability due to various situations.

Design of the Next Generation Aircraft Noise Prediction Program: ANOPP2

NASA Technical Reports Server (NTRS)

Lopes, Leonard V., Dr.; Burley, Casey L.

2011-01-01

The requirements, constraints, and design of NASA's next generation Aircraft NOise Prediction Program (ANOPP2) are introduced. Similar to its predecessor (ANOPP), ANOPP2 provides the U.S. Government with an independent aircraft system noise prediction capability that can be used as a stand-alone program or within larger trade studies that include performance, emissions, and fuel burn. The ANOPP2 framework is designed to facilitate the combination of acoustic approaches of varying fidelity for the analysis of noise from conventional and unconventional aircraft. ANOPP2 integrates noise prediction and propagation methods, including those found in ANOPP, into a unified system that is compatible for use within general aircraft analysis software. The design of the system is described in terms of its functionality and capability to perform predictions accounting for distributed sources, installation effects, and propagation through a non-uniform atmosphere including refraction and the influence of terrain. The philosophy of mixed fidelity noise prediction through the use of nested Ffowcs Williams and Hawkings surfaces is presented and specific issues associated with its implementation are identified. Demonstrations for a conventional twin-aisle and an unconventional hybrid wing body aircraft configuration are presented to show the feasibility and capabilities of the system. Isolated model-scale jet noise predictions are also presented using high-fidelity and reduced order models, further demonstrating ANOPP2's ability to provide predictions for model-scale test configurations.

Understanding How Domestic Violence Support Services Promote Survivor Well-being: A Conceptual Model.

PubMed

Sullivan, Cris M

2018-01-01

Domestic violence (DV) victim service programs have been increasingly expected by legislators and funders to demonstrate that they are making a significant difference in the lives of those using their services. Alongside this expectation, they are being asked to describe the Theory of Change guiding how they believe their practices lead to positive results for survivors and their children. Having a widely accepted conceptual model is not just potentially useful to funders and policy makers as they help shape policy and practice -- it can also help programs continually reflect upon and improve their work. This paper describes the iterative and collaborative process undertaken to generate a conceptual model describing how DV victim services are expected to improve survivors' lives. The Social and Emotional Well-Being Framework guiding the model is an ideal structure to use to describe the goals and practices of DV programs because this framework: (1) accurately represents DV programs' goal of helping survivors and their children thrive; and (2) recognizes the importance of community, social, and societal context in influencing individuals' social and emotional well-being. The model was designed to guide practice and to generate new questions for research and evaluation that address individual, community, and systems factors that promote or hinder survivor safety and well-being.

Optimizing Biorefinery Design and Operations via Linear Programming Models

DOE Office of Scientific and Technical Information (OSTI.GOV)

Talmadge, Michael; Batan, Liaw; Lamers, Patrick

The ability to assess and optimize economics of biomass resource utilization for the production of fuels, chemicals and power is essential for the ultimate success of a bioenergy industry. The team of authors, consisting of members from the National Renewable Energy Laboratory (NREL) and the Idaho National Laboratory (INL), has developed simple biorefinery linear programming (LP) models to enable the optimization of theoretical or existing biorefineries. The goal of this analysis is to demonstrate how such models can benefit the developing biorefining industry. It focuses on a theoretical multi-pathway, thermochemical biorefinery configuration and demonstrates how the biorefinery can use LPmore » models for operations planning and optimization in comparable ways to the petroleum refining industry. Using LP modeling tools developed under U.S. Department of Energy's Bioenergy Technologies Office (DOE-BETO) funded efforts, the authors investigate optimization challenges for the theoretical biorefineries such as (1) optimal feedstock slate based on available biomass and prices, (2) breakeven price analysis for available feedstocks, (3) impact analysis for changes in feedstock costs and product prices, (4) optimal biorefinery operations during unit shutdowns / turnarounds, and (5) incentives for increased processing capacity. These biorefinery examples are comparable to crude oil purchasing and operational optimization studies that petroleum refiners perform routinely using LPs and other optimization models. It is important to note that the analyses presented in this article are strictly theoretical and they are not based on current energy market prices. The pricing structure assigned for this demonstrative analysis is consistent with $4 per gallon gasoline, which clearly assumes an economic environment that would favor the construction and operation of biorefineries. The analysis approach and examples provide valuable insights into the usefulness of analysis tools for maximizing the potential benefits of biomass utilization for production of fuels, chemicals and power.« less

Capital Growth Paths of the Neoclassical Growth Model

PubMed Central

Takahashi, Taro

2012-01-01

This paper derives the first-order approximated paths of both types of capital in the two-capital neoclassical growth model. The derived capital growth paths reveal that the short-run growth effect of capital injection differs considerably depending on which type of capital is enhanced. This result demonstrates the importance of well-targeted capital enhancement programs such as public sector projects and foreign aid. PMID:23185344

Social Skills Training for Adolescents With Intellectual Disabilities: A School-Based Evaluation.

PubMed

O'Handley, Roderick D; Ford, W Blake; Radley, Keith C; Helbig, Kate A; Wimberly, Joy K

2016-07-01

Individuals with intellectual disabilities (ID) often demonstrate impairments in social functioning, with deficits becoming more apparent during adolescence. This study evaluated the effects of the Superheroes Social Skills program, a program that combines behavioral skills training and video modeling to teach target social skills, on accurate demonstration of three target social skills in adolescents with ID. Skills taught in the present study include Expressing Wants and Needs, Conversation, and Turn Taking. Four adolescents with ID participated in a 3-week social skills intervention, with the intervention occurring twice per week. A multiple baseline across skills design was used to determine the effect of the intervention on social skill accuracy in both a training and generalization setting. All participants demonstrated substantial improvements in skill accuracy in both settings, with teacher ratings of social functioning further suggesting generalization of social skills to nontraining settings. © The Author(s) 2016.

Preparing systems engineering and computing science students in disciplined methods, quantitative, and advanced statistical techniques to improve process performance

NASA Astrophysics Data System (ADS)

McCray, Wilmon Wil L., Jr.

The research was prompted by a need to conduct a study that assesses process improvement, quality management and analytical techniques taught to students in U.S. colleges and universities undergraduate and graduate systems engineering and the computing science discipline (e.g., software engineering, computer science, and information technology) degree programs during their academic training that can be applied to quantitatively manage processes for performance. Everyone involved in executing repeatable processes in the software and systems development lifecycle processes needs to become familiar with the concepts of quantitative management, statistical thinking, process improvement methods and how they relate to process-performance. Organizations are starting to embrace the de facto Software Engineering Institute (SEI) Capability Maturity Model Integration (CMMI RTM) Models as process improvement frameworks to improve business processes performance. High maturity process areas in the CMMI model imply the use of analytical, statistical, quantitative management techniques, and process performance modeling to identify and eliminate sources of variation, continually improve process-performance; reduce cost and predict future outcomes. The research study identifies and provides a detail discussion of the gap analysis findings of process improvement and quantitative analysis techniques taught in U.S. universities systems engineering and computing science degree programs, gaps that exist in the literature, and a comparison analysis which identifies the gaps that exist between the SEI's "healthy ingredients " of a process performance model and courses taught in U.S. universities degree program. The research also heightens awareness that academicians have conducted little research on applicable statistics and quantitative techniques that can be used to demonstrate high maturity as implied in the CMMI models. The research also includes a Monte Carlo simulation optimization model and dashboard that demonstrates the use of statistical methods, statistical process control, sensitivity analysis, quantitative and optimization techniques to establish a baseline and predict future customer satisfaction index scores (outcomes). The American Customer Satisfaction Index (ACSI) model and industry benchmarks were used as a framework for the simulation model.

Wavelet-linear genetic programming: A new approach for modeling monthly streamflow

NASA Astrophysics Data System (ADS)

Ravansalar, Masoud; Rajaee, Taher; Kisi, Ozgur

2017-06-01

The streamflows are important and effective factors in stream ecosystems and its accurate prediction is an essential and important issue in water resources and environmental engineering systems. A hybrid wavelet-linear genetic programming (WLGP) model, which includes a discrete wavelet transform (DWT) and a linear genetic programming (LGP) to predict the monthly streamflow (Q) in two gauging stations, Pataveh and Shahmokhtar, on the Beshar River at the Yasuj, Iran were used in this study. In the proposed WLGP model, the wavelet analysis was linked to the LGP model where the original time series of streamflow were decomposed into the sub-time series comprising wavelet coefficients. The results were compared with the single LGP, artificial neural network (ANN), a hybrid wavelet-ANN (WANN) and Multi Linear Regression (MLR) models. The comparisons were done by some of the commonly utilized relevant physical statistics. The Nash coefficients (E) were found as 0.877 and 0.817 for the WLGP model, for the Pataveh and Shahmokhtar stations, respectively. The comparison of the results showed that the WLGP model could significantly increase the streamflow prediction accuracy in both stations. Since, the results demonstrate a closer approximation of the peak streamflow values by the WLGP model, this model could be utilized for the simulation of cumulative streamflow data prediction in one month ahead.

BRONX HEALTH EDUCATION PROJECT FOR WEST AFRICAN IMMIGRANTS.

PubMed

Wilson, Rebecca Dover; Elgoghail, Nadia

2016-01-01

The transition from a traditional West African diet and lifestyle to a modern diet has a significant impact on health and the risk of chronic disease. To implement a health education program for West African immigrants in the U.S. to address health risks associated with the modern diet. A health education program model targeted at West African immigrants in the Bronx was determined based on existing health education programs with educational materials, group education sessions, and targeted individual counseling. A health education program was successfully implemented at a clinic comprised of West African immigrant patients in the Bronx. This project demonstrates an example of a targeted health education program for West African immigrants to address health risks related to diet.

Dual degree partnership in nursing: an innovative undergraduate educational model.

PubMed

Bastable, Susan B; Markowitz, Marianne

2012-10-01

We report the success of a unique articulation Dual Degree Partnership in Nursing (DDPN) model. The process used to establish and implement this approach is described. Unlike typical 2+2 agreements between associate degree (AD) and bachelor degree (BS) nursing education programs, the DDPN is designed with a 1+2+1 sequence. Intended to attract high school students, this model provides the opportunity to earn two degrees (AD and BS) while experiencing a 4-year campus living and learning environment. This configuration was accomplished without compromising the integrity of either of the established programs. After collecting data over the past 6 years, this model demonstrates popularity with the traditional-aged student, as well as success from an academic perspective. Statistics on retention, graduation, and NCLEX® pass rates indicate the feasibility and success of the model. Based on the findings, the potential for replication is promising for other colleges interested in a similar collaboration. Copyright 2012, SLACK Incorporated.

Scalable geocomputation: evolving an environmental model building platform from single-core to supercomputers

NASA Astrophysics Data System (ADS)

Schmitz, Oliver; de Jong, Kor; Karssenberg, Derek

2017-04-01

There is an increasing demand to run environmental models on a big scale: simulations over large areas at high resolution. The heterogeneity of available computing hardware such as multi-core CPUs, GPUs or supercomputer potentially provides significant computing power to fulfil this demand. However, this requires detailed knowledge of the underlying hardware, parallel algorithm design and the implementation thereof in an efficient system programming language. Domain scientists such as hydrologists or ecologists often lack this specific software engineering knowledge, their emphasis is (and should be) on exploratory building and analysis of simulation models. As a result, models constructed by domain specialists mostly do not take full advantage of the available hardware. A promising solution is to separate the model building activity from software engineering by offering domain specialists a model building framework with pre-programmed building blocks that they combine to construct a model. The model building framework, consequently, needs to have built-in capabilities to make full usage of the available hardware. Developing such a framework providing understandable code for domain scientists and being runtime efficient at the same time poses several challenges on developers of such a framework. For example, optimisations can be performed on individual operations or the whole model, or tasks need to be generated for a well-balanced execution without explicitly knowing the complexity of the domain problem provided by the modeller. Ideally, a modelling framework supports the optimal use of available hardware whichsoever combination of model building blocks scientists use. We demonstrate our ongoing work on developing parallel algorithms for spatio-temporal modelling and demonstrate 1) PCRaster, an environmental software framework (http://www.pcraster.eu) providing spatio-temporal model building blocks and 2) parallelisation of about 50 of these building blocks using the new Fern library (https://github.com/geoneric/fern/), an independent generic raster processing library. Fern is a highly generic software library and its algorithms can be configured according to the configuration of a modelling framework. With manageable programming effort (e.g. matching data types between programming and domain language) we created a binding between Fern and PCRaster. The resulting PCRaster Python multicore module can be used to execute existing PCRaster models without having to make any changes to the model code. We show initial results on synthetic and geoscientific models indicating significant runtime improvements provided by parallel local and focal operations. We further outline challenges in improving remaining algorithms such as flow operations over digital elevation maps and further potential improvements like enhancing disk I/O.

Mineral resource models and the Alaskan Mineral Resource Assessment Program

USGS Publications Warehouse

Singer, Donald A.; Vogely, W. A.

1975-01-01

The least exacting demand that can be made of any model is that it serves as a device whereby we can predict actual physical happenings. Another demand which could be made is that the physical happenings predicted be in some way relevant to man, either by allowing him to anticipate future uncontrollable events or by demonstrating the possible consequences of various decisions. To date, many mineral resource models have been deficient in meeting these demands.

Implementing and Sustaining Team-Based Telecare for Bipolar Disorder: Lessons Learned from a Model-Guided, Mixed Methods Analysis.

PubMed

Bauer, Mark S; Krawczyk, Lois; Tuozzo, Kathy; Frigand, Cara; Holmes, Sally; Miller, Christopher J; Abel, Erica; Osser, David N; Franz, Aleda; Brandt, Cynthia; Rooney, Meghan; Fleming, Jerry; Smith, Eric; Godleski, Linda

2018-01-01

Telemental health interventions have empirical support from clinical trials and structured demonstration projects. However, their implementation and sustainability under less structured clinical conditions are not well demonstrated. We conducted a follow-up analysis of the implementation and sustainability of a clinical video teleconference-based collaborative care model for individuals with bipolar disorder treated in the Department of Veterans Affairs to (a) characterize the extent of implementation and sustainability of the program after its establishment and (b) identify barriers and facilitators to implementation and sustainability. We conducted a mixed methods program evaluation, assessing quantitative aspects of implementation according to the Reach, Efficacy, Adoption, Implementation, and Maintenance implementation framework. We conducted qualitative analysis of semistructured interviews with 16 of the providers who submitted consults, utilizing the Integrated Promoting Action on Research Implementation in the Health Services implementation framework. The program demonstrated linear growth in sites (n = 35) and consults (n = 915) from late 2011 through mid-2016. Site-based analysis indicated statistically significant sustainability beyond the first year of operation. Qualitative analysis identified key facilitators, including consult content, ease of use via electronic health record, and national infrastructure. Barriers included availability of telehealth space, equipment, and staff at the sites, as well as the labor-intensive nature of scheduling. The program achieved continuous growth over almost 5 years due to (1) successfully filling a need perceived by providers, (2) developing in a supportive context, and (3) receiving effective facilitation by national and local infrastructure. Clinical video teleconference-based interventions, even multicomponent collaborative care interventions for individuals with complex mental health conditions, can grow vigorously under appropriate conditions.

Electrochemical impedance spectroscopy of supercapacitors: A novel analysis approach using evolutionary programming

NASA Astrophysics Data System (ADS)

Oz, Alon; Hershkovitz, Shany; Tsur, Yoed

2014-11-01

In this contribution we present a novel approach to analyze impedance spectroscopy measurements of supercapacitors. Transforming the impedance data into frequency-dependent capacitance allows us to use Impedance Spectroscopy Genetic Programming (ISGP) in order to find the distribution function of relaxation times (DFRT) of the processes taking place in the tested device. Synthetic data was generated in order to demonstrate this technique and a model for supercapacitor ageing process has been obtained.

Multi-community command and control systems in law enforcement: An introductory planning guide

NASA Technical Reports Server (NTRS)

Sohn, R. L.; Garcia, E. A.; Kennedy, R. D.

1976-01-01

A set of planning guidelines for multi-community command and control systems in law enforcement is presented. Essential characteristics and applications of these systems are outlined. Requirements analysis, system concept design, implementation planning, and performance and cost modeling are described and demonstrated with numerous examples. Program management techniques and joint powers agreements for multicommunity programs are discussed in detail. A description of a typical multi-community computer-aided dispatch system is appended.

Recruitment and Retention of Minority Students in Teacher Education: Programs That Work. Proceedings of the National Conference on the Recruitment and Retention of Minority Students in Teacher Education (4th, Lexington, Kentucky, January 15-17, 1990). 1990).

ERIC Educational Resources Information Center

Middleton, Ernest J., Ed.; And Others

These conference proceedings provide an introduction to strategies and models for the recruitment and retention of minority teachers. Many of the programs described in this document demonstrate networking and partnerships, with team building between local school districts, state and local associations, universities, and community groups to enhance…

Common ground, not a battle ground. Violence prevention at a detoxification facility.

PubMed

Adamson, Mary A; Vincent, Audrey A; Cundiff, Jeff

2009-08-01

This article evaluates the results of a workplace violence prevention program implemented in a Colorado detoxification facility. The program interventions are modeled after federal Occupational Safety and Health Administration guidelines and use theories from both nursing and criminology for philosophy and direction. Serving as its own control, the detoxification facility shares data measured over a 4-year period, demonstrating a sharp decline in assault rates after program implementation. The importance of administrative controls, environmental adjustments, recordkeeping and evaluation, and education and training are emphasized as key components of success. Copyright (c) 2009, SLACK Incorporated.

Programming the Navier-Stokes computer: An abstract machine model and a visual editor

NASA Technical Reports Server (NTRS)

Middleton, David; Crockett, Tom; Tomboulian, Sherry

1988-01-01

The Navier-Stokes computer is a parallel computer designed to solve Computational Fluid Dynamics problems. Each processor contains several floating point units which can be configured under program control to implement a vector pipeline with several inputs and outputs. Since the development of an effective compiler for this computer appears to be very difficult, machine level programming seems necessary and support tools for this process have been studied. These support tools are organized into a graphical program editor. A programming process is described by which appropriate computations may be efficiently implemented on the Navier-Stokes computer. The graphical editor would support this programming process, verifying various programmer choices for correctness and deducing values such as pipeline delays and network configurations. Step by step details are provided and demonstrated with two example programs.

Evaluation of a Digital Behavioral Counseling Program for Reducing Risk Factors for Chronic Disease in a Workforce.

PubMed

Wilson, Mark G; Castro Sweet, Cynthia M; Edge, Michael D; Madero, Erica N; McGuire, Megan; Pilsmaker, Megan; Carpenter, Dan; Kirschner, Scott

2017-08-01

To evaluate a digitally delivered, intensive behavioral counseling program for a workforce at risk for obesity-related chronic disease. Employees were offered a digital health program modeled after the diabetes prevention program (DPP). Annual workforce health assessments were used to examine changes in chronic disease risk factors between participants (n = 634) relative to a matched comparison group (n = 1268). Overall, employees were gaining an average of 3.5 pounds annually before program inception. Program engagement was positive; 83% completed the majority of the curriculum and 31% lost at least 5% of their starting weight. Compared with non-participating peers, participants demonstrated reduced weight, improved fasting blood glucose, and improved nutritional intake after a year. The digital health program was effective for engaging employees in health behavior change. Digital options facilitate widespread implementation.

Strong Tobacco Control Program Requirements and Secure Funding Are Not Enough: Lessons From Florida

PubMed Central

Kennedy, Allison; Sullivan, Sarah; Hendlin, Yogi; Barnes, Richard

2012-01-01

Florida’s Tobacco Pilot Program (TPP; 1998–2003), with its edgy Truth media campaign, achieved unprecedented youth smoking reductions and became a model for tobacco control programming. In 2006, 3 years after the TPP was defunded, public health groups restored funding for tobacco control programming by convincing Florida voters to amend their constitution. Despite the new program’s strong legal structure, Governor Charlie Crist’s Department of Health implemented a low-impact program. Although they secured the program’s strong structure and funding, Florida’s nongovernmental public health organizations did not mobilize to demand a high-impact program. Implementation of Florida’s Amendment 4 demonstrates that a strong programmatic structure and secure funding are insufficient to ensure a successful public health program, without external pressure from nongovernmental groups. PMID:22420813

Return-on-Investment (ROI) Analyses of an Inpatient Lay Health Worker Model on 30-Day Readmission Rates in a Rural Community Hospital.

PubMed

Cardarelli, Roberto; Bausch, Gregory; Murdock, Joan; Chyatte, Michelle Renee

2017-07-07

The purpose of the study was to assess the return-on-investment (ROI) of an inpatient lay health worker (LHW) model in a rural Appalachian community hospital impacting 30-day readmission rates. The Bridges to Home (BTH) study completed an evaluation in 2015 of an inpatient LHW model in a rural Kentucky hospital that demonstrated a reduction in 30-day readmission rates by 47.7% compared to a baseline period. Using the hospital's utilization and financial data, a validated ROI calculator specific to care transition programs was used to assess the ROI of the BTH model comparing 3 types of payment models including Diagnosis Related Group (DRG)-only payments, pay-for-performance (P4P) contracts, and accountable care organizations (ACOs). The BTH program had a -$0.67 ROI if the hospital had only a DRG-based payment model. If the hospital had P4P contracts with payers and 0.1% of its annual operating revenue was at risk, the ROI increased to $7.03 for every $1 spent on the BTH program. However, if the hospital was an ACO as was the case for this study's community hospital, the ROI significantly increased to $38.48 for every $1 spent on the BTH program. The BTH model showed a viable ROI to be considered by community hospitals that are part of an ACO or P4P program. A LHW care transition model may be a cost-effective alternative for impacting excess 30-day readmissions and avoiding associated penalties for hospital systems with a value-based payment model. © 2017 National Rural Health Association.

Mental models of adherence: parallels in perceptions, values, and expectations in adherence to prescribed home exercise programs and other personal regimens.

PubMed

Rizzo, Jon; Bell, Alexandra

2018-05-09

A mental model is the collection of an individual's perceptions, values, and expectations about a particular aspect of their life, which strongly influences behaviors. This study explored orthopedic outpatients mental models of adherence to prescribed home exercise programs and how they related to mental models of adherence to other types of personal regimens. The study followed an interpretive description qualitative design. Data were collected via two semi-structured interviews. Interview One focused on participants prior experiences adhering to personal regimens. Interview Two focused on experiences adhering to their current prescribed home exercise program. Data analysis followed a constant comparative method. Findings revealed similarity in perceptions, values, and expectations that informed individuals mental models of adherence to personal regimens and prescribed home exercise programs. Perceived realized results, expected results, perceived social supports, and value of convenience characterized mental models of adherence. Parallels between mental models of adherence for prescribed home exercise and other personal regimens suggest that patients adherence behavior to prescribed routines may be influenced by adherence experiences in other aspects of their lives. By gaining insight into patients adherence experiences, values, and expectations across life domains, clinicians may tailor supports that enhance home exercise adherence. Implications for Rehabilitation A mental model is the collection of an individual's perceptions, values, and expectations about a particular aspect of their life, which is based on prior experiences and strongly influences behaviors. This study demonstrated similarity in orthopedic outpatients mental models of adherence to prescribed home exercise programs and adherence to personal regimens in other aspects of their lives. Physical therapists should inquire about patients non-medical adherence experiences, as strategies patients customarily use to adhere to other activities may inform strategies to promote prescribed home exercise adherence.

Transfer of skills on LapSim virtual reality laparoscopic simulator into the operating room in urology.

PubMed

Alwaal, Amjad; Al-Qaoud, Talal M; Haddad, Richard L; Alzahrani, Tarek M; Delisle, Josee; Anidjar, Maurice

2015-01-01

Assessing the predictive validity of the LapSim simulator within a urology residency program. Twelve urology residents at McGill University were enrolled in the study between June 2008 and December 2011. The residents had weekly training on the LapSim that consisted of 3 tasks (cutting, clip-applying, and lifting and grasping). They underwent monthly assessment of their LapSim performance using total time, tissue damage and path length among other parameters as surrogates for their economy of movement and respect for tissue. The last residents' LapSim performance was compared with their first performance of radical nephrectomy on anesthetized porcine models in their 4(th) year of training. Two independent urologic surgeons rated the resident performance on the porcine models, and kappa test with standardized weight function was used to assess for inter-observer bias. Nonparametric spearman correlation test was used to compare each rater's cumulative score with the cumulative score obtained on the porcine models in order to test the predictive validity of the LapSim simulator. The kappa results demonstrated acceptable agreement between the two observers among all domains of the rating scale of performance except for confidence of movement and efficiency. In addition, poor predictive validity of the LapSim simulator was demonstrated. Predictive validity was not demonstrated for the LapSim simulator in the context of a urology residency training program.

Methodology for the evaluation of the Stephanie Alexander Kitchen Garden program.

PubMed

Gibbs, L; Staiger, P K; Townsend, M; Macfarlane, S; Gold, L; Block, K; Johnson, B; Kulas, J; Waters, E

2013-04-01

Community and school cooking and gardening programs have recently increased internationally. However, despite promising indications, there is limited evidence of their effectiveness. This paper presents the evaluation framework and methods negotiated and developed to meet the information needs of all stakeholders for the Stephanie Alexander Kitchen Garden (SAKG) program, a combined cooking and gardening program implemented in selectively funded primary schools across Australia. The evaluation used multiple aligned theoretical frameworks and models, including a public health ecological approach, principles of effective health promotion and models of experiential learning. The evaluation is a non-randomised comparison of six schools receiving the program (intervention) and six comparison schools (all government-funded primary schools) in urban and rural areas of Victoria, Australia. A mixed-methods approach was used, relying on qualitative measures to understand changes in school cultures and the experiential impacts on children, families, teachers, parents and volunteers, and quantitative measures at baseline and 1 year follow up to provide supporting information regarding patterns of change. The evaluation study design addressed the limitations of many existing evaluation studies of cooking or garden programs. The multistrand approach to the mixed methodology maintained the rigour of the respective methods and provided an opportunity to explore complexity in the findings. Limited sensitivity of some of the quantitative measures was identified, as well as the potential for bias in the coding of the open-ended questions. The SAKG evaluation methodology will address the need for appropriate evaluation approaches for school-based kitchen garden programs. It demonstrates the feasibility of a meaningful, comprehensive evaluation of school-based programs and also demonstrates the central role qualitative methods can have in a mixed-method evaluation. So what? This paper contributes to debate about appropriate evaluation approaches to meet the information needs of all stakeholders and will support the sharing of measures and potential comparisons between program outcomes for comparable population groups and settings.

Clean Coal Technology Demonstration Program: Program Update 1998

DOE Office of Scientific and Technical Information (OSTI.GOV)

Assistant Secretary for Fossil Energy

1999-03-01

Annual report on the Clean Coal Technology Demonstration Program (CCT Program). The report address the role of the CCT Program, implementation, funding and costs, accomplishments, project descriptions, legislative history, program history, environmental aspects, and project contacts. The project descriptions describe the technology and provides a brief summary of the demonstration results.

Evaluation of FY 1987 safety belt use law state enforcement grants

DOT National Transportation Integrated Search

1991-03-01

The report presents information and an evaluation of safety belt use law enforcement grants provided to 17 states through supplemental 403 grants during FY 1987. Elmira-type programs were to serve as a model in order to demonstrate that basic enforce...

A Leisure Activities Curricular Component for Severely Handicapped Youth: Why and How.

ERIC Educational Resources Information Center

Voeltz, Luanna M.; Apffel, James A.

1981-01-01

A rationale for including a leisure time activities curriculum component in educational programing for severely handicapped individuals is presented. The importance of play and the constructive use of leisure time is described through the use of a model demonstration project. (JN)

Enhancing Electrical Troubleshooting Skills in a Computer-Coached Practice Environment.

ERIC Educational Resources Information Center

Johnson, Scott D.; And Others

1993-01-01

This study examines the effect of the "Technical Troubleshooting Tutor," a computer-coached training program, on aircraft electrical system troubleshooting. Performance ability differences between control groups are noted, and troubleshooting models and flow diagram examples are included. The study demonstrates the possibilities for…

DEMONSTRATION OF THE ANALYTIC ELEMENT METHOD FOR WELLHEAD PROTECTION

EPA Science Inventory

A new computer program has been developed to determine time-of-travel capture zones in relatively simple geohydrological settings. The WhAEM package contains an analytic element model that uses superposition of (many) closed form analytical solutions to generate a ground-water fl...

76 FR 56745 - Notice of Proposed Information Collection Requests

Federal Register 2010, 2011, 2012, 2013, 2014

2011-09-14

... Students with Intellectual Disabilities Evaluation System. OMB Control Number: Pending. Agency Form Number...) grants to fund the creation of Transition Programs for Students with Intellectual Disabilities (TPSIDs) (model demonstrations) in 23 states. OPE also awarded a grant to the Institute for Community Inclusion at...

Early Risers. What Works Clearinghouse Intervention Report

ERIC Educational Resources Information Center

What Works Clearinghouse, 2012

2012-01-01

"Early Risers" is a multi-year prevention program for elementary school children demonstrating early aggressive and disruptive behavior. The intervention model includes two child-focused components and two parent/family components. The Child Skills component is designed to teach skills that enhance children's emotional and behavioral…

An integer programming model for distal humerus fracture fixation planning.

PubMed

Maratt, Joseph D; Peaks, Ya-Sin A; Doro, Lisa Case; Karunakar, Madhav A; Hughes, Richard E

2008-05-01

To demonstrate the feasibility of an integer programming model to assist in pre-operative planning for open reduction and internal fixation of a distal humerus fracture. We describe an integer programming model based on the objective of maximizing the reward for screws placed while satisfying the requirements for sound internal fixation. The model maximizes the number of bicortical screws placed while avoiding screw collision and favoring screws of greater length that cross multiple fracture planes. The model was tested on three types of total articular fractures of the distal humerus. Solutions were generated using 5, 9, 21 and 33 possible screw orientations per hole. Solutions generated using 33 possible screw orientations per hole and five screw lengths resulted in the most clinically relevant fixation plan and required the calculation of 1,191,975 pairs of screws that resulted in collision. At this level of complexity, the pre-processor took 104 seconds to generate the constraints for the solver, and a solution was generated in under one minute in all three cases. Despite the large size of this problem, it can be solved in a reasonable amount of time, making use of the model practical in pre-surgical planning.

Active cleaning technique device

NASA Technical Reports Server (NTRS)

Shannon, R. L.; Gillette, R. B.

1973-01-01

The objective of this program was to develop a laboratory demonstration model of an active cleaning technique (ACT) device. The principle of this device is based primarily on the technique for removing contaminants from optical surfaces. This active cleaning technique involves exposing contaminated surfaces to a plasma containing atomic oxygen or combinations of other reactive gases. The ACT device laboratory demonstration model incorporates, in addition to plasma cleaning, the means to operate the device as an ion source for sputtering experiments. The overall ACT device includes a plasma generation tube, an ion accelerator, a gas supply system, a RF power supply and a high voltage dc power supply.

An alternating treatment comparison of oral and total communications training programs with echolalic autistic children.

PubMed Central

Barrera, R D; Sulzer-Azaroff, B

1983-01-01

An alternating treatment comparison was conducted of the relative effectiveness of oral and total communication training models for teaching expressive labeling skills to three echolalic autistic children. The results of this comparison demonstrated that total communication proved to be the most successful approach with each of the subjects. In addition, the replication of these findings both within and across subjects suggest that total communication may be, in general, the most effective of these two training models for teaching basic vocal language skills to echolalic children. A number of hypotheses are presented that may provide a basis for the demonstrated effect. PMID:6654770

Learning abstract visual concepts via probabilistic program induction in a Language of Thought.

PubMed

Overlan, Matthew C; Jacobs, Robert A; Piantadosi, Steven T

2017-11-01

The ability to learn abstract concepts is a powerful component of human cognition. It has been argued that variable binding is the key element enabling this ability, but the computational aspects of variable binding remain poorly understood. Here, we address this shortcoming by formalizing the Hierarchical Language of Thought (HLOT) model of rule learning. Given a set of data items, the model uses Bayesian inference to infer a probability distribution over stochastic programs that implement variable binding. Because the model makes use of symbolic variables as well as Bayesian inference and programs with stochastic primitives, it combines many of the advantages of both symbolic and statistical approaches to cognitive modeling. To evaluate the model, we conducted an experiment in which human subjects viewed training items and then judged which test items belong to the same concept as the training items. We found that the HLOT model provides a close match to human generalization patterns, significantly outperforming two variants of the Generalized Context Model, one variant based on string similarity and the other based on visual similarity using features from a deep convolutional neural network. Additional results suggest that variable binding happens automatically, implying that binding operations do not add complexity to peoples' hypothesized rules. Overall, this work demonstrates that a cognitive model combining symbolic variables with Bayesian inference and stochastic program primitives provides a new perspective for understanding people's patterns of generalization. Copyright © 2017 Elsevier B.V. All rights reserved.

Demonstration of natural gas reburn for NO{sub x} emissions reduction at Ohio Edison Company`s cyclone-fired Niles Plant Unit Number 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Borio, R.W.; Lewis, R.D.; Koucky, R.W.

1996-04-01

Electric utility power plants account for about one-third of the NO{sub x} and two-thirds of the SO{sub 2} emissions in the US cyclone-fired boilers, while representing about 9% of the US coal-fired generating capacity, emit about 14% of the NO{sub x} produced by coal-fired utility boilers. Given this background, the Environmental Protection Agency, the Gas Research Institute, the Electric Power Research Institute, the Pittsburgh Energy Technology Center, and the Ohio Coal Development Office sponsored a program led by ABB Combustion Engineering, Inc. (ABB-CE) to demonstrate reburning on a cyclone-fired boiler. Ohio Edison provided Unit No. 1 at their Niles Stationmore » for the reburn demonstration along with financial assistance. The Niles Unit No. 1 reburn system was started up in September 1990. This reburn program was the first full-scale reburn system demonstration in the US. This report describes work performed during the program. The work included a review of reburn technology, aerodynamic flow model testing of reburn system design concepts, design and construction of the reburn system, parametric performance testing, long-term load dispatch testing, and boiler tube wall thickness monitoring. The report also contains a description of the Niles No. 1 host unit, a discussion of conclusions and recommendations derived from the program, tabulation of data from parametric and long-term tests, and appendices which contain additional tabulated test results.« less

Developing a media- and school-based program for substance abuse prevention among Hispanic youth: a case study of Mirame!/Look at Me!

PubMed

Ramirez, A G; Gallion, K J; Espinoza, R; Chalela, P

1999-01-01

Mirame!/Look at Me! is a substance abuse prevention program for low-income Mexican-American youth aged 9-13 years. The theory-driven curriculum, developed for mass distribution via a satellite television network, features social models who demonstrate cognitive-behavioral skills and display conservative norms regarding substance abuse. An 18-session curriculum contains 5-min videos that are assigned to be followed by discussion and social reinforcement from a teacher or volunteer. This case study reports the program development process and experiences in the initial dissemination of the program through national networks for schools and cable television subscribers.

A computer program for calculating laminar and turbulent boundary layers for two-dimensional time-dependent flows

NASA Technical Reports Server (NTRS)

Cebeci, T.; Carr, L. W.

1978-01-01

A computer program is described which provides solutions of two dimensional equations appropriate to laminar and turbulent boundary layers for boundary conditions with an external flow which fluctuates in magnitude. The program is based on the numerical solution of the governing boundary layer equations by an efficient two point finite difference method. An eddy viscosity formulation was used to model the Reynolds shear stress term. The main features of the method are briefly described and instructions for the computer program with a listing are provided. Sample calculations to demonstrate its usage and capabilities for laminar and turbulent unsteady boundary layers with an external flow which fluctuated in magnitude are presented.

48 CFR 19.1001 - General.

Code of Federal Regulations, 2010 CFR

2010-10-01

... SMALL BUSINESS PROGRAMS Small Business Competitiveness Demonstration Program 19.1001 General. The Small Business Competitiveness Demonstration Program was established by the Small Business Competitiveness Demonstration Program Act of 1988, Public Law 100-656 (15 U.S.C. 644 note). The program is implemented by a...

75 FR 82567 - Federal Acquisition Regulation; Repeal of the Small Business Competitiveness Demonstration Program

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-30

... Competitiveness Demonstration Program AGENCY: Department of Defense (DoD), General Services Administration (GSA... of the Small Business Competitiveness Demonstration Program, to meet the requirements of section 1335... (15 U.S.C. 644 note), the Small Business Competitiveness Demonstration Program. In accordance with the...

The bottom-up approach to integrative validity: a new perspective for program evaluation.

PubMed

Chen, Huey T

2010-08-01

The Campbellian validity model and the traditional top-down approach to validity have had a profound influence on research and evaluation. That model includes the concepts of internal and external validity and within that model, the preeminence of internal validity as demonstrated in the top-down approach. Evaluators and researchers have, however, increasingly recognized that in an evaluation, the over-emphasis on internal validity reduces that evaluation's usefulness and contributes to the gulf between academic and practical communities regarding interventions. This article examines the limitations of the Campbellian validity model and the top-down approach and provides a comprehensive, alternative model, known as the integrative validity model for program evaluation. The integrative validity model includes the concept of viable validity, which is predicated on a bottom-up approach to validity. This approach better reflects stakeholders' evaluation views and concerns, makes external validity workable, and becomes therefore a preferable alternative for evaluation of health promotion/social betterment programs. The integrative validity model and the bottom-up approach enable evaluators to meet scientific and practical requirements, facilitate in advancing external validity, and gain a new perspective on methods. The new perspective also furnishes a balanced view of credible evidence, and offers an alternative perspective for funding. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Finding Bayesian Optimal Designs for Nonlinear Models: A Semidefinite Programming-Based Approach.

PubMed

Duarte, Belmiro P M; Wong, Weng Kee

2015-08-01

This paper uses semidefinite programming (SDP) to construct Bayesian optimal design for nonlinear regression models. The setup here extends the formulation of the optimal designs problem as an SDP problem from linear to nonlinear models. Gaussian quadrature formulas (GQF) are used to compute the expectation in the Bayesian design criterion, such as D-, A- or E-optimality. As an illustrative example, we demonstrate the approach using the power-logistic model and compare results in the literature. Additionally, we investigate how the optimal design is impacted by different discretising schemes for the design space, different amounts of uncertainty in the parameter values, different choices of GQF and different prior distributions for the vector of model parameters, including normal priors with and without correlated components. Further applications to find Bayesian D-optimal designs with two regressors for a logistic model and a two-variable generalised linear model with a gamma distributed response are discussed, and some limitations of our approach are noted.

Finding Bayesian Optimal Designs for Nonlinear Models: A Semidefinite Programming-Based Approach

PubMed Central

Duarte, Belmiro P. M.; Wong, Weng Kee

2014-01-01

Summary This paper uses semidefinite programming (SDP) to construct Bayesian optimal design for nonlinear regression models. The setup here extends the formulation of the optimal designs problem as an SDP problem from linear to nonlinear models. Gaussian quadrature formulas (GQF) are used to compute the expectation in the Bayesian design criterion, such as D-, A- or E-optimality. As an illustrative example, we demonstrate the approach using the power-logistic model and compare results in the literature. Additionally, we investigate how the optimal design is impacted by different discretising schemes for the design space, different amounts of uncertainty in the parameter values, different choices of GQF and different prior distributions for the vector of model parameters, including normal priors with and without correlated components. Further applications to find Bayesian D-optimal designs with two regressors for a logistic model and a two-variable generalised linear model with a gamma distributed response are discussed, and some limitations of our approach are noted. PMID:26512159

Results of the Medicare Health Support disease-management pilot program.

PubMed

McCall, Nancy; Cromwell, Jerry

2011-11-03

In the Medicare Modernization Act of 2003, Congress required the Centers for Medicare and Medicaid Services to test the commercial disease-management model in the Medicare fee-for-service program. The Medicare Health Support Pilot Program was a large, randomized study of eight commercial programs for disease management that used nurse-based call centers. We randomly assigned patients with heart failure, diabetes, or both to the intervention or to usual care (control) and compared them with the use of a difference-in-differences method to evaluate the effects of the commercial programs on the quality of clinical care, acute care utilization, and Medicare expenditures for Medicare fee-for-service beneficiaries. The study included 242,417 patients (163,107 in the intervention group and 79,310 in the control group). The eight commercial disease-management programs did not reduce hospital admissions or emergency room visits, as compared with usual care. We observed only 14 significant improvements in process-of-care measures out of 40 comparisons. These modest improvements came at substantial cost to the Medicare program in fees paid to the disease-management companies ($400 million), with no demonstrable savings in Medicare expenditures. In this large study, commercial disease-management programs using nurse-based call centers achieved only modest improvements in quality-of-care measures, with no demonstrable reduction in the utilization of acute care or the costs of care.

Modelling acquired dyslexia: a software tool for developing grapheme-phoneme correspondences.

PubMed Central

D'Autrechy, C. L.; Reggia, J. A.; Berndt, R. S.

1991-01-01

In extending a computer model of acquired dyslexia, it has become necessary to develop a way to group printed characters in a word so that the character groups essentially have a one-to-one correspondence with the word's phonemes (speech sounds). This requires deriving a set of correspondences (legal character groupings, legal associations of character groups with phonemes, etc.) that yield a single grouping or "segmentation" of characters when applied to any English word. To facilitate and partially automate this task, a segmentation program has been developed that uses an interchangeable set of correspondences. The program segments words according to these correspondences and tabulates their success over large sets of words. The program has been used successfully to segment a 20,000 word corpus, demonstrating that this approach can be used effectively and efficiently. PMID:1807611

Temperature based daily incoming solar radiation modeling based on gene expression programming, neuro-fuzzy and neural network computing techniques.

NASA Astrophysics Data System (ADS)

Landeras, G.; López, J. J.; Kisi, O.; Shiri, J.

2012-04-01

The correct observation/estimation of surface incoming solar radiation (RS) is very important for many agricultural, meteorological and hydrological related applications. While most weather stations are provided with sensors for air temperature detection, the presence of sensors necessary for the detection of solar radiation is not so habitual and the data quality provided by them is sometimes poor. In these cases it is necessary to estimate this variable. Temperature based modeling procedures are reported in this study for estimating daily incoming solar radiation by using Gene Expression Programming (GEP) for the first time, and other artificial intelligence models such as Artificial Neural Networks (ANNs), and Adaptive Neuro-Fuzzy Inference System (ANFIS). Traditional temperature based solar radiation equations were also included in this study and compared with artificial intelligence based approaches. Root mean square error (RMSE), mean absolute error (MAE) RMSE-based skill score (SSRMSE), MAE-based skill score (SSMAE) and r2 criterion of Nash and Sutcliffe criteria were used to assess the models' performances. An ANN (a four-input multilayer perceptron with ten neurons in the hidden layer) presented the best performance among the studied models (2.93 MJ m-2 d-1 of RMSE). A four-input ANFIS model revealed as an interesting alternative to ANNs (3.14 MJ m-2 d-1 of RMSE). Very limited number of studies has been done on estimation of solar radiation based on ANFIS, and the present one demonstrated the ability of ANFIS to model solar radiation based on temperatures and extraterrestrial radiation. By the way this study demonstrated, for the first time, the ability of GEP models to model solar radiation based on daily atmospheric variables. Despite the accuracy of GEP models was slightly lower than the ANFIS and ANN models the genetic programming models (i.e., GEP) are superior to other artificial intelligence models in giving a simple explicit equation for the phenomenon which shows the relationship between the input and output parameters. This study provided new alternatives for solar radiation estimation based on temperatures.

Flood Catastrophe Model for Designing Optimal Flood Insurance Program: Estimating Location-Specific Premiums in the Netherlands.

PubMed

Ermolieva, T; Filatova, T; Ermoliev, Y; Obersteiner, M; de Bruijn, K M; Jeuken, A

2017-01-01

As flood risks grow worldwide, a well-designed insurance program engaging various stakeholders becomes a vital instrument in flood risk management. The main challenge concerns the applicability of standard approaches for calculating insurance premiums of rare catastrophic losses. This article focuses on the design of a flood-loss-sharing program involving private insurance based on location-specific exposures. The analysis is guided by a developed integrated catastrophe risk management (ICRM) model consisting of a GIS-based flood model and a stochastic optimization procedure with respect to location-specific risk exposures. To achieve the stability and robustness of the program towards floods with various recurrences, the ICRM uses stochastic optimization procedure, which relies on quantile-related risk functions of a systemic insolvency involving overpayments and underpayments of the stakeholders. Two alternative ways of calculating insurance premiums are compared: the robust derived with the ICRM and the traditional average annual loss approach. The applicability of the proposed model is illustrated in a case study of a Rotterdam area outside the main flood protection system in the Netherlands. Our numerical experiments demonstrate essential advantages of the robust premiums, namely, that they: (1) guarantee the program's solvency under all relevant flood scenarios rather than one average event; (2) establish a tradeoff between the security of the program and the welfare of locations; and (3) decrease the need for other risk transfer and risk reduction measures. © 2016 Society for Risk Analysis.

On the Cutting Edge Professional Development Program - An effective model built from years of experience

NASA Astrophysics Data System (ADS)

Bruckner, M. Z.; Macdonald, H.; Beane, R. J.; Manduca, C. A.; Mcconnell, D. A.; Mogk, D. W.; Tewksbury, B. J.; Wiese, K.; Wysession, M. E.; Iverson, E. A. R.; Fox, S.

2015-12-01

The On the Cutting Edge (CE) program offers a successful model for designing and convening professional development events. Information about the model is now available on the CE website. The program model has evolved from more than 12 years of experience, building with input from strong leaders and participants. CE offers face-to-face, virtual, and hybrid events, and features a rich website that supports these professional development events as well as a growing community with a shared interest in effective geoscience teaching. Data from national surveys, participant feedback, and self-report data indicate the program's success in improving undergraduate geoscience education. Successes are also demonstrated in classroom observations using RTOP, indicating a significant difference in teaching style among participants and non-participants. A suite of web pages, with a planning timeline, provides guidance to those interested in designing and convening face-to-face or virtual events based on the CE model. The pages suggest ways to develop robust event goals and evaluation tools, how to choose strong leaders and recruit diverse participants, advice for designing effective event programs that utilize participant expertise, websites, and web tools, and suggestions for effectively disseminating event results and producing useful products. The CE model has been successfully transferred to projects that vary in scale and discipline. Best practices from the CE model include (1) thinking of the workshop as shared enterprise among conveners and participants; (2) incorporating conveners and participants who bring diverse viewpoints and approaches; (3) promoting structured discussions that utilize participants' expertise; (4) emphasizing practical strategies to effect change; and (5) using the website as a platform to prepare for the workshop, share ideas, and problem-solve challenges. Learn more about how to utilize this model for your project at:serc.carleton.edu/NAGTWorkshops/workshops/convene

Forecast of the number of patients with end-stage renal disease in the United States to the year 2010.

PubMed

Xue, J L; Ma, J Z; Louis, T A; Collins, A J

2001-12-01

As the United States end-stage renal disease (ESRD) program enters the new millennium, the continued growth of the ESRD population poses a challenge for policy makers, health care providers, and financial planners. To assist in future planning for the ESRD program, the growth of patient numbers and Medicare costs was forecasted to the year 2010 by modeling of historical data from 1982 through 1997. A stepwise autoregressive method and exponential smoothing models were used. The forecasting models for ESRD patient numbers demonstrated mean errors of -0.03 to 1.03%, relative to the observed values. The model for Medicare payments demonstrated -0.12% mean error. The R(2) values for the forecasting models ranged from 99.09 to 99.98%. On the basis of trends in patient numbers, this forecast projects average annual growth of the ESRD populations of approximately 4.1% for new patients, 6.4% for long-term ESRD patients, 7.1% for dialysis patients, 6.1% for patients with functioning transplants, and 8.2% for patients on waiting lists for transplants, as well as 7.7% for Medicare expenditures. The numbers of patients with ESRD in 2010 are forecasted to be 129,200 +/- 7742 (95% confidence limits) new patients, 651,330 +/- 15,874 long-term ESRD patients, 520,240 +/- 25,609 dialysis patients, 178,806 +/- 4349 patients with functioning transplants, and 95,550 +/- 5478 patients on waiting lists. The forecasted Medicare expenditures are projected to increase to $28.3 +/- 1.7 billion by 2010. These projections are subject to many factors that may alter the actual growth, compared with the historical patterns. They do, however, provide a basis for discussing the future growth of the ESRD program and how the ESRD community can meet the challenges ahead.

Early Intervention and Its Effects on Maternal and Child Development.

ERIC Educational Resources Information Center

Slaughter, Diana T.

1983-01-01

The longitudinal study reported used an intervention strategy to test the thesis that sociocultural background, mediated by maternal attitudes and behaviors, influences Black children's early development in educationally significant ways. Two models of parent education were contrasted: the Levenstein toy demonstration program and the…

75 FR 47798 - Office of Special Education and Rehabilitative Services-Special Demonstration Programs-Model...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-08-09

... Security Disability Insurance (SSDI) Served by State Vocational Rehabilitation (VR) Agencies AGENCY: Office... vocational rehabilitation (VR) agencies. The Assistant Secretary may use this priority for competitions in... beneficiaries receiving services from State VR agencies. DATES: Effective Date: This priority is effective...

Paralegals in Corrections: A Proposed Model.

ERIC Educational Resources Information Center

McShane, Marilyn D.

1987-01-01

Describes the legal assistance program currently offered by the Texas Department of Corrections which demonstrates the wide range of questions and problems that the paralegal can address. Reviews paralegal's functions in the prison setting and the services they can provide in assisting prisoners to maintain their rights. (Author/ABB)

76 FR 35185 - Submission for OMB Review; Comment Request

Federal Register 2010, 2011, 2012, 2013, 2014

2011-06-16

..., filing of petitions and applications and agency #0;statements of organization and functions are examples... develop and test methods of providing access to food for children in urban and rural areas during the... each Summer Food Service Program (SFSP) enhancement demonstration model on participation and meal...

Professional Development for Secondary Science Teachers in a Contextual Setting.

ERIC Educational Resources Information Center

Nelson, C. Riley; Hanegan, Nikki L.

This paper discusses an intensive professional development program designed by a science education specialist in conjunction with university science research professors demonstrating quality science teaching practices for secondary teachers in a contextual setting. The intensive professional development model was designed using research based,…

DEMONSTRATION OF THE ANALYTIC ELEMENT METHOD FOR WELLHEAD PROJECTION - PROJECT SUMMARY

EPA Science Inventory

A new computer program has been developed to determine time-of-travel capture zones in relatively simple geohydrological settings. The WhAEM package contains an analytic element model that uses superposition of (many) closed form analytical solutions to generate a ground-water fl...

Aviation & Space Education: A Teacher's Resource Guide.

ERIC Educational Resources Information Center

Texas State Dept. of Aviation, Austin.

This resource guide contains information on curriculum guides, resources for teachers, computer software and computer related programs, audio/visual presentations, model aircraft and demonstration aids, training seminars and career education, and an aerospace bibliography for primary grades. Each entry includes all or some of the following items:…

Computing Fiber/Matrix Interfacial Effects In SiC/RBSN

NASA Technical Reports Server (NTRS)

Goldberg, Robert K.; Hopkins, Dale A.

1996-01-01

Computational study conducted to demonstrate use of boundary-element method in analyzing effects of fiber/matrix interface on elastic and thermal behaviors of representative laminated composite materials. In study, boundary-element method implemented by Boundary Element Solution Technology - Composite Modeling System (BEST-CMS) computer program.

Integrating Basic Science and Clinical Teaching for Third-Year Medical Students.

ERIC Educational Resources Information Center

Croen, Lila G.; And Others

1986-01-01

A 2-month program for third-year students at Yeshiva's Albert Einstein College of Medicine that provides a model for integrating basic sciences and clinical training is described. It demonstrates the importance of lifelong learning in a field that constantly changes. (Author/MLW)

Patients' mental models and adherence to outpatient physical therapy home exercise programs.

PubMed

Rizzo, Jon

2015-05-01

Within physical therapy, patient adherence usually relates to attending appointments, following advice, and/or undertaking prescribed exercise. Similar to findings for general medical adherence, patient adherence to physical therapy home exercise programs (HEP) is estimated between 35 and 72%. Adherence to HEPs is a multifactorial and poorly understood phenomenon, with no consensus regarding a common theoretical framework that best guides empirical or clinical efforts. Mental models, a construct used to explain behavior and decision-making in the social sciences, may serve as this framework. Mental models comprise an individual's tacit thoughts about how the world works. They include assumptions about new experiences and expectations for the future based on implicit comparisons between current and past experiences. Mental models play an important role in decision-making and guiding actions. This professional theoretical article discusses empirical research demonstrating relationships among mental models, prior experience, and adherence decisions in medical and physical therapy contexts. Specific issues related to mental models and physical therapy patient adherence are discussed, including the importance of articulation of patients' mental models, assessment of patients' mental models that relate to exercise program adherence, discrepancy between patient and provider mental models, and revision of patients' mental models in ways that enhance adherence. The article concludes with practical implications for physical therapists and recommendations for further research to better understand the role of mental models in physical therapy patient adherence behavior.

A generalized fuzzy linear programming approach for environmental management problem under uncertainty.

PubMed

Fan, Yurui; Huang, Guohe; Veawab, Amornvadee

2012-01-01

In this study, a generalized fuzzy linear programming (GFLP) method was developed to deal with uncertainties expressed as fuzzy sets that exist in the constraints and objective function. A stepwise interactive algorithm (SIA) was advanced to solve GFLP model and generate solutions expressed as fuzzy sets. To demonstrate its application, the developed GFLP method was applied to a regional sulfur dioxide (SO2) control planning model to identify effective SO2 mitigation polices with a minimized system performance cost under uncertainty. The results were obtained to represent the amount of SO2 allocated to different control measures from different sources. Compared with the conventional interval-parameter linear programming (ILP) approach, the solutions obtained through GFLP were expressed as fuzzy sets, which can provide intervals for the decision variables and objective function, as well as related possibilities. Therefore, the decision makers can make a tradeoff between model stability and the plausibility based on solutions obtained through GFLP and then identify desired policies for SO2-emission control under uncertainty.

A fuzzy chance-constrained programming model with type 1 and type 2 fuzzy sets for solid waste management under uncertainty

NASA Astrophysics Data System (ADS)

Ma, Xiaolin; Ma, Chi; Wan, Zhifang; Wang, Kewei

2017-06-01

Effective management of municipal solid waste (MSW) is critical for urban planning and development. This study aims to develop an integrated type 1 and type 2 fuzzy sets chance-constrained programming (ITFCCP) model for tackling regional MSW management problem under a fuzzy environment, where waste generation amounts are supposed to be type 2 fuzzy variables and treated capacities of facilities are assumed to be type 1 fuzzy variables. The evaluation and expression of uncertainty overcome the drawbacks in describing fuzzy possibility distributions as oversimplified forms. The fuzzy constraints are converted to their crisp equivalents through chance-constrained programming under the same or different confidence levels. Regional waste management of the City of Dalian, China, was used as a case study for demonstration. The solutions under various confidence levels reflect the trade-off between system economy and reliability. It is concluded that the ITFCCP model is capable of helping decision makers to generate reasonable waste-allocation alternatives under uncertainties.

Managing Algorithmic Skeleton Nesting Requirements in Realistic Image Processing Applications: The Case of the SKiPPER-II Parallel Programming Environment's Operating Model

NASA Astrophysics Data System (ADS)

Coudarcher, Rémi; Duculty, Florent; Serot, Jocelyn; Jurie, Frédéric; Derutin, Jean-Pierre; Dhome, Michel

2005-12-01

SKiPPER is a SKeleton-based Parallel Programming EnviRonment being developed since 1996 and running at LASMEA Laboratory, the Blaise-Pascal University, France. The main goal of the project was to demonstrate the applicability of skeleton-based parallel programming techniques to the fast prototyping of reactive vision applications. This paper deals with the special features embedded in the latest version of the project: algorithmic skeleton nesting capabilities and a fully dynamic operating model. Throughout the case study of a complete and realistic image processing application, in which we have pointed out the requirement for skeleton nesting, we are presenting the operating model of this feature. The work described here is one of the few reported experiments showing the application of skeleton nesting facilities for the parallelisation of a realistic application, especially in the area of image processing. The image processing application we have chosen is a 3D face-tracking algorithm from appearance.

Mathematical model of salt cavern leaching for gas storage in high-insoluble salt formations.

PubMed

Li, Jinlong; Shi, Xilin; Yang, Chunhe; Li, Yinping; Wang, Tongtao; Ma, Hongling

2018-01-10

A mathematical model is established to predict the salt cavern development during leaching in high-insoluble salt formations. The salt-brine mass transfer rate is introduced, and the effects of the insoluble sediments on the development of the cavern are included. Considering the salt mass conservation in the cavern, the couple equations of the cavern shape, brine concentration and brine velocity are derived. According to the falling and accumulating rules of the insoluble particles, the governing equations of the insoluble sediments are deduced. A computer program using VC++ language is developed to obtain the numerical solution of these equations. To verify the proposed model, the leaching processes of two salt caverns of Jintan underground gas storage are simulated by the program, using the actual geological and technological parameters. The same simulation is performed by the current mainstream leaching software in China. The simulation results of the two programs are compared with the available field data. It shows that the proposed software is more accurate on the shape prediction of the cavern bottom and roof, which demonstrates the reliability and applicability of the model.

Interfacing the Generalized Fluid System Simulation Program with the SINDA/G Thermal Program

NASA Technical Reports Server (NTRS)

Schallhorn, Paul; Palmiter, Christopher; Farmer, Jeffery; Lycans, Randall; Tiller, Bruce

2000-01-01

A general purpose, one dimensional fluid flow code has been interfaced with the thermal analysis program SINDA/G. The flow code, GFSSP, is capable of analyzing steady state and transient flow in a complex network. The flow code is capable of modeling several physical phenomena including compressibility effects, phase changes, body forces (such as gravity and centrifugal) and mixture thermodynamics for multiple species. The addition of GFSSP to SINDA/G provides a significant improvement in convective heat transfer modeling for SINDA/G. The interface development was conducted in two phases. This paper describes the first (which allows for steady and quasi-steady - unsteady solid, steady fluid - conjugate heat transfer modeling). The second (full transient conjugate heat transfer modeling) phase of the interface development will be addressed in a later paper. Phase 1 development has been benchmarked to an analytical solution with excellent agreement. Additional test cases for each development phase demonstrate desired features of the interface. The results of the benchmark case, three additional test cases and a practical application are presented herein.

High speed turboprop aeroacoustic study (counterrotation). Volume 2: Computer programs

NASA Technical Reports Server (NTRS)

Whitfield, C. E.; Mani, R.; Gliebe, P. R.

1990-01-01

The isolated counterrotating high speed turboprop noise prediction program developed and funded by GE Aircraft Engines was compared with model data taken in the GE Aircraft Engines Cell 41 anechoic facility, the Boeing Transonic Wind Tunnel, and in the NASA-Lewis 8 x 6 and 9 x 15 wind tunnels. The predictions show good agreement with measured data under both low and high speed simulated flight conditions. The installation effect model developed for single rotation, high speed turboprops was extended to include counter rotation. The additional effect of mounting a pylon upstream of the forward rotor was included in the flow field modeling. A nontraditional mechanism concerning the acoustic radiation from a propeller at angle of attack was investigated. Predictions made using this approach show results that are in much closer agreement with measurement over a range of operating conditions than those obtained via traditional fluctuating force methods. The isolated rotors and installation effects models were combined into a single prediction program. The results were compared with data taken during the flight test of the B727/UDF (trademark) engine demonstrator aircraft.

Analytical and Experimental Evaluation of Digital Control Systems for the Semi-Span Super-Sonic Transport (S4T) Wind Tunnel Model

NASA Technical Reports Server (NTRS)

Wieseman, Carol D.; Christhilf, David; Perry, Boyd, III

2012-01-01

An important objective of the Semi-Span Super-Sonic Transport (S4T) wind tunnel model program was the demonstration of Flutter Suppression (FS), Gust Load Alleviation (GLA), and Ride Quality Enhancement (RQE). It was critical to evaluate the stability and robustness of these control laws analytically before testing them and experimentally while testing them to ensure safety of the model and the wind tunnel. MATLAB based software was applied to evaluate the performance of closed-loop systems in terms of stability and robustness. Existing software tools were extended to use analytical representations of the S4T and the control laws to analyze and evaluate the control laws prior to testing. Lessons were learned about the complex windtunnel model and experimental testing. The open-loop flutter boundary was determined from the closed-loop systems. A MATLAB/Simulink Simulation developed under the program is available for future work to improve the CPE process. This paper is one of a series of that comprise a special session, which summarizes the S4T wind-tunnel program.

High speed turboprop aeroacoustic study (counterrotation). Volume 2: Computer programs

NASA Astrophysics Data System (ADS)

Whitfield, C. E.; Mani, R.; Gliebe, P. R.

1990-07-01

The isolated counterrotating high speed turboprop noise prediction program developed and funded by GE Aircraft Engines was compared with model data taken in the GE Aircraft Engines Cell 41 anechoic facility, the Boeing Transonic Wind Tunnel, and in the NASA-Lewis 8 x 6 and 9 x 15 wind tunnels. The predictions show good agreement with measured data under both low and high speed simulated flight conditions. The installation effect model developed for single rotation, high speed turboprops was extended to include counter rotation. The additional effect of mounting a pylon upstream of the forward rotor was included in the flow field modeling. A nontraditional mechanism concerning the acoustic radiation from a propeller at angle of attack was investigated. Predictions made using this approach show results that are in much closer agreement with measurement over a range of operating conditions than those obtained via traditional fluctuating force methods. The isolated rotors and installation effects models were combined into a single prediction program. The results were compared with data taken during the flight test of the B727/UDF (trademark) engine demonstrator aircraft.

A system-level model for the microbial regulatory genome.

PubMed

Brooks, Aaron N; Reiss, David J; Allard, Antoine; Wu, Wei-Ju; Salvanha, Diego M; Plaisier, Christopher L; Chandrasekaran, Sriram; Pan, Min; Kaur, Amardeep; Baliga, Nitin S

2014-07-15

Microbes can tailor transcriptional responses to diverse environmental challenges despite having streamlined genomes and a limited number of regulators. Here, we present data-driven models that capture the dynamic interplay of the environment and genome-encoded regulatory programs of two types of prokaryotes: Escherichia coli (a bacterium) and Halobacterium salinarum (an archaeon). The models reveal how the genome-wide distributions of cis-acting gene regulatory elements and the conditional influences of transcription factors at each of those elements encode programs for eliciting a wide array of environment-specific responses. We demonstrate how these programs partition transcriptional regulation of genes within regulons and operons to re-organize gene-gene functional associations in each environment. The models capture fitness-relevant co-regulation by different transcriptional control mechanisms acting across the entire genome, to define a generalized, system-level organizing principle for prokaryotic gene regulatory networks that goes well beyond existing paradigms of gene regulation. An online resource (http://egrin2.systemsbiology.net) has been developed to facilitate multiscale exploration of conditional gene regulation in the two prokaryotes. © 2014 The Authors. Published under the terms of the CC BY 4.0 license.

surf3d: A 3-D finite-element program for the analysis of surface and corner cracks in solids subjected to mode-1 loadings

NASA Technical Reports Server (NTRS)

Raju, I. S.; Newman, J. C., Jr.

1993-01-01

A computer program, surf3d, that uses the 3D finite-element method to calculate the stress-intensity factors for surface, corner, and embedded cracks in finite-thickness plates with and without circular holes, was developed. The cracks are assumed to be either elliptic or part eliptic in shape. The computer program uses eight-noded hexahedral elements to model the solid. The program uses a skyline storage and solver. The stress-intensity factors are evaluated using the force method, the crack-opening displacement method, and the 3-D virtual crack closure methods. In the manual the input to and the output of the surf3d program are described. This manual also demonstrates the use of the program and describes the calculation of the stress-intensity factors. Several examples with sample data files are included with the manual. To facilitate modeling of the user's crack configuration and loading, a companion program (a preprocessor program) that generates the data for the surf3d called gensurf was also developed. The gensurf program is a three dimensional mesh generator program that requires minimal input and that builds a complete data file for surf3d. The program surf3d is operational on Unix machines such as CRAY Y-MP, CRAY-2, and Convex C-220.

Validation of the Lockheed Martin Morphing Concept with Wind Tunnel Testing

NASA Technical Reports Server (NTRS)

Ivanco, Thomas G.; Scott, Robert C.; Love, Michael H.; Zink Scott; Weisshaar, Terrence A.

2007-01-01

The Morphing Aircraft Structures (MAS) program is a Defense Advanced Research Projects Agency (DARPA) led effort to develop morphing flight vehicles capable of radical shape change in flight. Two performance parameters of interest are loiter time and dash speed as these define the persistence and responsiveness of an aircraft. The geometrical characteristics that optimize loiter time and dash speed require different geometrical planforms. Therefore, radical shape change, usually involving wing area and sweep, allows vehicle optimization across many flight regimes. The second phase of the MAS program consisted of wind tunnel tests conducted at the NASA Langley Transonic Dynamics Tunnel to demonstrate two morphing concepts and their enabling technologies with large-scale semi-span models. This paper will focus upon one of those wind tunnel tests that utilized a model developed by Lockheed Martin Aeronautics Company (LM). Wind tunnel success criteria were developed by NASA to support the DARPA program objectives. The primary focus of this paper will be the demonstration of the DARPA objectives by systematic evaluation of the wind tunnel model performance relative to the defined success criteria. This paper will also provide a description of the LM model and instrumentation, and document pertinent lessons learned. Finally, as part of the success criteria, aeroelastic characteristics of the LM derived MAS vehicle are also addressed. Evaluation of aeroelastic characteristics is the most detailed criterion investigated in this paper. While no aeroelastic instabilities were encountered as a direct result of the morphing design or components, several interesting and unexpected aeroelastic phenomenon arose during testing.

Competency-Based Education in Low Resource Settings: Development of a Novel Surgical Training Program.

PubMed

McCullough, Meghan; Campbell, Alex; Siu, Armando; Durnwald, Libby; Kumar, Shubha; Magee, William P; Swanson, Jordan

2018-03-01

The unmet burden of surgical disease represents a major global health concern, and a lack of trained providers is a critical component of the inadequacy of surgical care worldwide. Competency-based training has been advanced in high-income countries, improving technical skills and decreasing training time, but it is poorly understood how this model might be applied to low- and middle-income countries. We describe the development of a competency-based program to accelerate specialty training of in-country providers in cleft surgery techniques. The program was designed and piloted among eight trainees at five international cleft lip and palate surgical mission sites in Latin America and Africa. A competency-based evaluation form, designed for the program, was utilized to grade general technical and procedure-specific competencies, and pre- and post-training scores were analyzed using a paired t test. Trainees demonstrated improvement in average procedure-specific competency scores for both lip repairs (60.4-71.0%, p < 0.01) and palate (50.6-66.0%, p < 0.01). General technical competency scores also improved (63.6-72.0%, p < 0.01). Among the procedural competencies assessed, surgical markings showed the greatest improvement (19.0 and 22.8% for lip and palate, respectively), followed by nasal floor/mucosal approximation (15.0%) and hard palate dissection (17.1%). Surgical delivery models in LMICs are varied, and trade-offs often exist between goals of case throughput, quality and training. Pilot program results show that procedure-specific and general technical competencies can be improved over a relatively short time and demonstrate the feasibility of incorporating such a training program into surgical outreach missions.

Demonstration of Advanced EMI Models for Live-Site UXO Discrimination at Waikoloa, Hawaii

DTIC Science & Technology

2015-12-01

magnetic source models PNN Probabilistic Neural Network SERDP Strategic Environmental Research and Development Program SLO San Luis Obispo...SNR Signal to noise ratio SVM Support vector machine TD Time Domain TEMTADS Time Domain Electromagnetic Towed Array Detection System TOI... intrusive procedure, which was used by Parsons at WMA, failed to document accurately all intrusive results, or failed to detect and clear all UXO like

34 CFR 377.1 - What is the Demonstration Projects to Increase Client Choice Program?

Code of Federal Regulations, 2010 CFR

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false What is the Demonstration Projects to Increase Client... PROJECTS TO INCREASE CLIENT CHOICE PROGRAM General § 377.1 What is the Demonstration Projects to Increase Client Choice Program? The Demonstration Projects to Increase Client Choice Program is designed to...

Demonstration of CBR Modeling and Simulation Tool (CBRSim) Capabilities. Installation Technology Transfer Program

DTIC Science & Technology

2009-04-01

Capabilities Co ns tr uc tio n En gi ne er in g R es ea rc h La bo ra to ry Kathy L. Simunich, Timothy K. Perkins, David M. Bailey, David Brown, and...inversion height in convective condition is estimated with a one- dimensional model of the atmospheric boundary layer based on the Drie- donks slab model...tool and its capabilities. Installation geospatial data, in CAD format, were obtained for select buildings, roads, and topographic features in

Urine sampling and collection system optimization and testing

NASA Technical Reports Server (NTRS)

Fogal, G. L.; Geating, J. A.; Koesterer, M. G.

1975-01-01

A Urine Sampling and Collection System (USCS) engineering model was developed to provide for the automatic collection, volume sensing and sampling of urine from each micturition. The purpose of the engineering model was to demonstrate verification of the system concept. The objective of the optimization and testing program was to update the engineering model, to provide additional performance features and to conduct system testing to determine operational problems. Optimization tasks were defined as modifications to minimize system fluid residual and addition of thermoelectric cooling.

Finite element implementation of Robinson's unified viscoplastic model and its application to some uniaxial and multiaxial problems

NASA Technical Reports Server (NTRS)

Arya, V. K.; Kaufman, A.

1989-01-01

A description of the finite element implementation of Robinson's unified viscoplastic model into the General Purpose Finite Element Program (MARC) is presented. To demonstrate its application, the implementation is applied to some uniaxial and multiaxial problems. A comparison of the results for the multiaxial problem of a thick internally pressurized cylinder, obtained using the finite element implementation and an analytical solution, is also presented. The excellent agreement obtained confirms the correct finite element implementation of Robinson's model.

Finite element implementation of Robinson's unified viscoplastic model and its application to some uniaxial and multiaxial problems

NASA Technical Reports Server (NTRS)

Arya, V. K.; Kaufman, A.

1987-01-01

A description of the finite element implementation of Robinson's unified viscoplastic model into the General Purpose Finite Element Program (MARC) is presented. To demonstrate its application, the implementation is applied to some uniaxial and multiaxial problems. A comparison of the results for the multiaxial problem of a thick internally pressurized cylinder, obtained using the finite element implementation and an analytical solution, is also presented. The excellent agreement obtained confirms the correct finite element implementation of Robinson's model.

A human operator simulator model of the NASA Terminal Configured Vehicle (TCV)

NASA Technical Reports Server (NTRS)

Glenn, F. A., III; Doane, S. M.

1981-01-01

A generic operator model called HOS was used to simulate the behavior and performance of a pilot flying a transport airplane during instrument approach and landing operations in order to demonstrate the applicability of the model to problems associated with interfacing a crew with a flight system. The model which was installed and operated on NASA Langley's central computing system is described. Preliminary results of its application to an investigation of an innovative display system under development in Langley's terminal configured vehicle program are considered.

Finite element analysis of structural engineering problems using a viscoplastic model incorporating two back stresses

NASA Technical Reports Server (NTRS)

Arya, Vinod K.; Halford, Gary R.

1993-01-01

The feasibility of a viscoplastic model incorporating two back stresses and a drag strength is investigated for performing nonlinear finite element analyses of structural engineering problems. To demonstrate suitability for nonlinear structural analyses, the model is implemented into a finite element program and analyses for several uniaxial and multiaxial problems are performed. Good agreement is shown between the results obtained using the finite element implementation and those obtained experimentally. The advantages of using advanced viscoplastic models for performing nonlinear finite element analyses of structural components are indicated.

ATP Interior Noise Technology and Flight Demonstration Program

NASA Technical Reports Server (NTRS)

Stephens, David G.; Powell, Clemans A.

1988-01-01

The paper provides an overview of the ATP (Advanced Turboprop Program) acoustics program with emphasis on the NASA technology program and the recent NASA/Industry demonstration programs aimed at understanding and controlling passenger cabin noise. Technology developments in propeller (source) noise, cabin noise transmission, and subjective acoustics are described. Finally, an overview of the industry demonstrator programs is presented.

Proceedings of the AFOSR Special Conference on Prime-Power for High Energy Space Systems, Norfolk, Virginia, 22-25 February 1982. Volume I.

DTIC Science & Technology

1982-02-25

source both liquid and solid fuel combustion devices have been successfully demonstrated during various development programs . Nuclear reactor heat...U02 fuel in the core . Improving the heat pipe model to correlate more closely with the experimental data is a major concern in the development of...ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT, PROJECT. TASK Research & Development Associates (RDA) AREA &WKNT AE (X Rosslyn, VA 22209 61102F 2301

Engineering calculations for solving the orbital allotment problem

NASA Technical Reports Server (NTRS)

Reilly, C.; Walton, E. K.; Mount-Campbell, C.; Caldecott, R.; Aebker, E.; Mata, F.

1988-01-01

Four approaches for calculating downlink interferences for shaped-beam antennas are described. An investigation of alternative mixed-integer programming models for satellite synthesis is summarized. Plans for coordinating the various programs developed under this grant are outlined. Two procedures for ordering satellites to initialize the k-permutation algorithm are proposed. Results are presented for the k-permutation algorithms. Feasible solutions are found for 5 of the 6 problems considered. Finally, it is demonstrated that the k-permutation algorithm can be used to solve arc allotment problems.

Curve fitting and modeling with splines using statistical variable selection techniques

NASA Technical Reports Server (NTRS)

Smith, P. L.

1982-01-01

The successful application of statistical variable selection techniques to fit splines is demonstrated. Major emphasis is given to knot selection, but order determination is also discussed. Two FORTRAN backward elimination programs, using the B-spline basis, were developed. The program for knot elimination is compared in detail with two other spline-fitting methods and several statistical software packages. An example is also given for the two-variable case using a tensor product basis, with a theoretical discussion of the difficulties of their use.

AAFE large deployable antenna development program: Executive summary

NASA Technical Reports Server (NTRS)

1977-01-01

The large deployable antenna development program sponsored by the Advanced Applications Flight Experiments of the Langley Research Center is summarized. Projected user requirements for large diameter deployable reflector antennas were reviewed. Trade-off studies for the selection of a design concept for 10-meter diameter reflectors were made. A hoop/column concept was selected as the baseline concept. Parametric data are presented for 15-meter, 30-meter, and 100-meter diameters. A 1.82-meter diameter engineering model which demonstrated the feasiblity of the concept is described.

Space tug thermal control follow-on

NASA Technical Reports Server (NTRS)

Ward, T. L.

1975-01-01

The Space Tug Thermal Control Follow-On program was conducted to further explore some of the thermal control concepts proposed for use in space tug in a breadboard test program. The objectives were to demonstrate the thermal control capabilities of a louver/battery configuration and a thermal conditioning panel/heat pipe radiator configuration. An additional objective was added to model the header pipe and radiator of the second test and correlate the analysis with the test results. These three objectives were achieved and are discussed within this report.

VPP Star recognition

NASA Image and Video Library

2011-06-09

Stennis Space Center Deputy Director Rick Gilbrech (right) accepts a plaque designating the test facility as a Voluntary Protection Program Star site. Presenting the plaque is Clyde Payne, area director for the Occupational Safety and Health Administration in Jackson, Miss. OSHA established VPP in 1982 as a proactive safety management model to recognize excellence in safety and health. Since then, more than 2,000 organizations have been designated VPP Star sites. To reach that goal, an organization must demonstrate comprehensive and successful safety and health management programs in the workplace.

A fuelwood plantation site selection procedure using geographic information system technology: A case study in support of the NASA Global Habitability Program

NASA Technical Reports Server (NTRS)

Roller, N. E. G.; Colwell, J. E.; Sellman, A. N.

1985-01-01

A study undertaken in support of NASA's Global Habitability Program is described. A demonstration of geographic information system (GIS) technology for site evaluation and selection is given. The objective was to locate potential fuelwood plantations within a 50 km radius of Nairobi, Kenya. A model was developed to evaluate site potential based on capability and suitability criteria and implemented using the Environmental Research Institute of Michigan's geographic information system.

RevBayes: Bayesian Phylogenetic Inference Using Graphical Models and an Interactive Model-Specification Language

PubMed Central

Höhna, Sebastian; Landis, Michael J.

2016-01-01

Programs for Bayesian inference of phylogeny currently implement a unique and fixed suite of models. Consequently, users of these software packages are simultaneously forced to use a number of programs for a given study, while also lacking the freedom to explore models that have not been implemented by the developers of those programs. We developed a new open-source software package, RevBayes, to address these problems. RevBayes is entirely based on probabilistic graphical models, a powerful generic framework for specifying and analyzing statistical models. Phylogenetic-graphical models can be specified interactively in RevBayes, piece by piece, using a new succinct and intuitive language called Rev. Rev is similar to the R language and the BUGS model-specification language, and should be easy to learn for most users. The strength of RevBayes is the simplicity with which one can design, specify, and implement new and complex models. Fortunately, this tremendous flexibility does not come at the cost of slower computation; as we demonstrate, RevBayes outperforms competing software for several standard analyses. Compared with other programs, RevBayes has fewer black-box elements. Users need to explicitly specify each part of the model and analysis. Although this explicitness may initially be unfamiliar, we are convinced that this transparency will improve understanding of phylogenetic models in our field. Moreover, it will motivate the search for improvements to existing methods by brazenly exposing the model choices that we make to critical scrutiny. RevBayes is freely available at http://www.RevBayes.com. [Bayesian inference; Graphical models; MCMC; statistical phylogenetics.] PMID:27235697

RevBayes: Bayesian Phylogenetic Inference Using Graphical Models and an Interactive Model-Specification Language.

PubMed

Höhna, Sebastian; Landis, Michael J; Heath, Tracy A; Boussau, Bastien; Lartillot, Nicolas; Moore, Brian R; Huelsenbeck, John P; Ronquist, Fredrik

2016-07-01

Programs for Bayesian inference of phylogeny currently implement a unique and fixed suite of models. Consequently, users of these software packages are simultaneously forced to use a number of programs for a given study, while also lacking the freedom to explore models that have not been implemented by the developers of those programs. We developed a new open-source software package, RevBayes, to address these problems. RevBayes is entirely based on probabilistic graphical models, a powerful generic framework for specifying and analyzing statistical models. Phylogenetic-graphical models can be specified interactively in RevBayes, piece by piece, using a new succinct and intuitive language called Rev. Rev is similar to the R language and the BUGS model-specification language, and should be easy to learn for most users. The strength of RevBayes is the simplicity with which one can design, specify, and implement new and complex models. Fortunately, this tremendous flexibility does not come at the cost of slower computation; as we demonstrate, RevBayes outperforms competing software for several standard analyses. Compared with other programs, RevBayes has fewer black-box elements. Users need to explicitly specify each part of the model and analysis. Although this explicitness may initially be unfamiliar, we are convinced that this transparency will improve understanding of phylogenetic models in our field. Moreover, it will motivate the search for improvements to existing methods by brazenly exposing the model choices that we make to critical scrutiny. RevBayes is freely available at http://www.RevBayes.com [Bayesian inference; Graphical models; MCMC; statistical phylogenetics.]. © The Author(s) 2016. Published by Oxford University Press, on behalf of the Society of Systematic Biologists.

Mariner Jupiter/Saturn LCSSE thruster/valve assembly and injection propulsion unit rocket engine assemblies: 0.2-lbf T/VA development and margin limit test report

NASA Technical Reports Server (NTRS)

Clark, E. C.

1975-01-01

Thruster valve assemblies (T/VA's) were subjected to the development test program for the combined JPL Low-Cost Standardized Spacecraft Equipment (LCSSE) and Mariner Jupiter/Saturn '77 spacecraft (MJS) programs. The development test program was designed to achieve the following program goals: (1) demonstrate T/VA design compliance with JPL Specifications, (2) to conduct a complete performance Cf map of the T/VA over the full operating range of environment, (3) demonstrate T/VA life capability and characteristics of life margin for steady-state limit cycle and momentum wheel desaturation duty cycles, (4) verification of structural design capability, and (5) generate a computerized performance model capable of predicting T/VA operation over pressures ranging from 420 to 70 psia, propellant temperatures ranging from 140 F to 40 F, pulse widths of 0.008 to steady-state operation with unlimited duty cycle capability, and finally predict the transient performance associated with reactor heatup during any given duty cycle, start temperature, feed pressure, and propellant temperature conditions.

76 FR 12073 - Extension of Web-Based TRICARE Assistance Program Demonstration Program

Federal Register 2010, 2011, 2012, 2013, 2014

2011-03-04

... DEPARTMENT OF DEFENSE Office of the Secretary Extension of Web-Based TRICARE Assistance Program Demonstration Program AGENCY: Department of Defense. ACTION: Notice of a Two Year Extension of the Web-Based..., entitled Web-Based TRICARE Assistance Program. This demonstration was effective August 1, 2009, as...

Historical context for the creation of the Office of Adolescent Health and the Teen Pregnancy Prevention Program.

PubMed

Kappeler, Evelyn M; Farb, Amy Feldman

2014-03-01

In Fiscal Year 2010, Federal funds were dedicated to support evidence-based approaches to effectively target teen pregnancy prevention and resulted in the establishment of the Office of Adolescent Health (OAH) and the Teen Pregnancy Prevention (TPP) Program. Through the tiered TPP Program, OAH supports replication and evaluation of programs using models whose effectiveness has been demonstrated through rigorous evaluation and the development and testing of promising or innovative pregnancy prevention strategies and approaches. This article documents the creation of OAH and the development of the TPP Program, the identification of a TPP evidence base, current program and evaluation efforts at OAH, and government coordination and partnerships related to reducing teen pregnancy. This article is of interest to those working to improve the health and wellbeing of adolescents. Published by Elsevier Inc.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lai, Jih-Sheng

This paper introduces control system design based softwares, SIMNON and MATLAB/SIMULINK, for power electronics system simulation. A complete power electronics system typically consists of a rectifier bridge along with its smoothing capacitor, an inverter, and a motor. The system components, featuring discrete or continuous, linear or nonlinear, are modeled in mathematical equations. Inverter control methods,such as pulse-width-modulation and hysteresis current control, are expressed in either computer algorithms or digital circuits. After describing component models and control methods, computer programs are then developed for complete systems simulation. Simulation results are mainly used for studying system performances, such as input and outputmore » current harmonics, torque ripples, and speed responses. Key computer programs and simulation results are demonstrated for educational purposes.« less

Reducing software security risk through an integrated approach research initiative model based verification of the Secure Socket Layer (SSL) Protocol

NASA Technical Reports Server (NTRS)

Powell, John D.

2003-01-01

This document discusses the verification of the Secure Socket Layer (SSL) communication protocol as a demonstration of the Model Based Verification (MBV) portion of the verification instrument set being developed under the Reducing Software Security Risk (RSSR) Trough an Integrated Approach research initiative. Code Q of the National Aeronautics and Space Administration (NASA) funds this project. The NASA Goddard Independent Verification and Validation (IV&V) facility manages this research program at the NASA agency level and the Assurance Technology Program Office (ATPO) manages the research locally at the Jet Propulsion Laboratory (California institute of Technology) where the research is being carried out.

U.S. perspective on technology demonstration experiments for adaptive structures

NASA Technical Reports Server (NTRS)

Aswani, Mohan; Wada, Ben K.; Garba, John A.

1991-01-01

Evaluation of design concepts for adaptive structures is being performed in support of several focused research programs. These include programs such as Precision Segmented Reflector (PSR), Control Structure Interaction (CSI), and the Advanced Space Structures Technology Research Experiment (ASTREX). Although not specifically designed for adaptive structure technology validation, relevant experiments can be performed using the Passive and Active Control of Space Structures (PACOSS) testbed, the Space Integrated Controls Experiment (SPICE), the CSI Evolutionary Model (CEM), and the Dynamic Scale Model Test (DSMT) Hybrid Scale. In addition to the ground test experiments, several space flight experiments have been planned, including a reduced gravity experiment aboard the KC-135 aircraft, shuttle middeck experiments, and the Inexpensive Flight Experiment (INFLEX).

Advanced ETC/LSS computerized analytical models, CO2 concentration. Volume 1: Summary document

NASA Technical Reports Server (NTRS)

Taylor, B. N.; Loscutoff, A. V.

1972-01-01

Computer simulations have been prepared for the concepts of C02 concentration which have the potential for maintaining a C02 partial pressure of 3.0 mmHg, or less, in a spacecraft environment. The simulations were performed using the G-189A Generalized Environmental Control computer program. In preparing the simulations, new subroutines to model the principal functional components for each concept were prepared and integrated into the existing program. Sample problems were run to demonstrate the methods of simulation and performance characteristics of the individual concepts. Comparison runs for each concept can be made for parametric values of cabin pressure, crew size, cabin air dry and wet bulb temperatures, and mission duration.

Optimal Control Strategy Design Based on Dynamic Programming for a Dual-Motor Coupling-Propulsion System

PubMed Central

Zhang, Shuo; Zhang, Chengning; Han, Guangwei; Wang, Qinghui

2014-01-01

A dual-motor coupling-propulsion electric bus (DMCPEB) is modeled, and its optimal control strategy is studied in this paper. The necessary dynamic features of energy loss for subsystems is modeled. Dynamic programming (DP) technique is applied to find the optimal control strategy including upshift threshold, downshift threshold, and power split ratio between the main motor and auxiliary motor. Improved control rules are extracted from the DP-based control solution, forming near-optimal control strategies. Simulation results demonstrate that a significant improvement in reducing energy loss due to the dual-motor coupling-propulsion system (DMCPS) running is realized without increasing the frequency of the mode switch. PMID:25540814

Optimal control strategy design based on dynamic programming for a dual-motor coupling-propulsion system.

PubMed

Zhang, Shuo; Zhang, Chengning; Han, Guangwei; Wang, Qinghui

2014-01-01

A dual-motor coupling-propulsion electric bus (DMCPEB) is modeled, and its optimal control strategy is studied in this paper. The necessary dynamic features of energy loss for subsystems is modeled. Dynamic programming (DP) technique is applied to find the optimal control strategy including upshift threshold, downshift threshold, and power split ratio between the main motor and auxiliary motor. Improved control rules are extracted from the DP-based control solution, forming near-optimal control strategies. Simulation results demonstrate that a significant improvement in reducing energy loss due to the dual-motor coupling-propulsion system (DMCPS) running is realized without increasing the frequency of the mode switch.

Dissemination and adoption of the advanced primary care model in the Maryland multi-payer patient centered medical home program.

PubMed

Khanna, Niharika; Shaya, Fadia; Chirikov, Viktor; Steffen, Ben; Sharp, David

2014-02-01

The Maryland Learning Collaborative together with the Maryland Multi-Payer Program transformed 52 medical practices into patient-centered medical homes (PCMH). The Maryland Learning Collaborative developed an Internet-based 14-question Likert scale survey to assess the impact of the PCMH model on practices and providers, concerning how this new method is affecting patient care and outcomes. The survey was sent to 339 practitioners and 52 care management teams at 18 months into the program. Sixty-seven survey results were received and analyzed. After 18 months of participation in the PCMH initiative, participants demonstrated a better understanding of the PCMH initiative, improved patient access to care, improved care coordination, and increased health information technology optimization (p > .001). The findings from the survey evaluation suggest that practice participation in the Maryland Multi-Payer Program has enhanced access to care, influenced patient outcomes, improved care coordination, and increased use of health information technology.

A model for capacity-building in AIDS prevention programs.

PubMed

Ramos, Rebeca L; Ferreira-Pinto, João B

2002-06-01

This article discusses a collaboratively organizational capacity-building model for agencies engaged in HIV/AIDS prevention. The cooperative training approach (CTA) utilized by the Training and Technical Assistance Program trained participants to incorporate learned skills into their daily work practices, and to become trainers to help disseminate their newly acquired skills, first to others in their own organization and later to other organizations. The CTA was successfully implemented among 285 community-based organizations (CBOs) serving predominantly Hispanics in the U.S.-Mexico border region. The program evaluation demonstrated that it has significantly upgraded the program implementation capability and the organizational infrastructure of the participating organizations resulting in improved delivery of services to their clients. Furthermore, it fostered networking and collaboration for the development of sustainable training and technical assistance networks of agency staff skilled in organizational capacity building. It is suggested that funding agencies examine the feasibility of using this approach to increase the organizational capacity of CBOs involved in HIV/AIDS prevention.

Evaluation of a Digital Behavioral Counseling Program for Reducing Risk Factors for Chronic Disease in a Workforce

PubMed Central

Wilson, Mark G.; Castro Sweet, Cynthia M.; Edge, Michael D.; Madero, Erica N.; McGuire, Megan; Pilsmaker, Megan; Carpenter, Dan; Kirschner, Scott

2017-01-01

Objective: To evaluate a digitally delivered, intensive behavioral counseling program for a workforce at risk for obesity-related chronic disease. Methods: Employees were offered a digital health program modeled after the diabetes prevention program (DPP). Annual workforce health assessments were used to examine changes in chronic disease risk factors between participants (n = 634) relative to a matched comparison group (n = 1268). Results: Overall, employees were gaining an average of 3.5 pounds annually before program inception. Program engagement was positive; 83% completed the majority of the curriculum and 31% lost at least 5% of their starting weight. Compared with non-participating peers, participants demonstrated reduced weight, improved fasting blood glucose, and improved nutritional intake after a year. Conclusions: The digital health program was effective for engaging employees in health behavior change. Digital options facilitate widespread implementation. PMID:28650899

Cache Locality Optimization for Recursive Programs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Lifflander, Jonathan; Krishnamoorthy, Sriram

We present an approach to optimize the cache locality for recursive programs by dynamically splicing--recursively interleaving--the execution of distinct function invocations. By utilizing data effect annotations, we identify concurrency and data reuse opportunities across function invocations and interleave them to reduce reuse distance. We present algorithms that efficiently track effects in recursive programs, detect interference and dependencies, and interleave execution of function invocations using user-level (non-kernel) lightweight threads. To enable multi-core execution, a program is parallelized using a nested fork/join programming model. Our cache optimization strategy is designed to work in the context of a random work stealing scheduler. Wemore » present an implementation using the MIT Cilk framework that demonstrates significant improvements in sequential and parallel performance, competitive with a state-of-the-art compile-time optimizer for loop programs and a domain- specific optimizer for stencil programs.« less

Two fuzzy possibilistic bi-objective zero-one programming models for outsourcing the equipment maintenance problem

NASA Astrophysics Data System (ADS)

Vahdani, Behnam; Jolai, Fariborz; Tavakkoli-Moghaddam, Reza; Meysam Mousavi, S.

2012-07-01

Maintenance outsourcing can be regarded as a strategic weapon to increase productivity and customer satisfaction in many companies, and this critical activity can be performed in a more efficient and effective way. This article presents two novel fuzzy possibilistic bi-objective zero-one programming (FPBOZOP) models for outsourcing of the equipment maintenance. In these models, cost parameters, including outsourcing cost, risk cost, time operations for performing the equipment maintenance and reliability level, as well as other influential parameters are considered through the outsourcing process. Moreover, the presented models can measure the capability of the company in doing different activities, unlike previous studies, in order to see the possibility of maintenance in-house, and can lead to make a best decision on the basis of the models' results. Both models are developed under uncertainty, which bring top managers the possibility of assigning more than one equipment or project to the supplier so that the profit is maximized, and the cost is minimized by considering bi-objectives concurrently. Then, a new fuzzy mathematical programming based possibilistic approach is introduced as a solution methodology from the recent literature to solve the proposed bi-objective zero-one programming (BOZOP) models and to reach a preferred compromise solution. Furthermore, a real-case study is utilized to demonstrate and to validate the effectiveness of the presented models. The computational results revealed that the models can be implemented in variety of problems in the domain of the equipment maintenance outsourcing and project outsourcing either from theory or application perspectives.

Psychological screening program overview.

PubMed

Wright, Kathleen M; Huffman, Ann H; Adler, Amy B; Castro, Carl A

2002-10-01

This article reviews the literature on health surveillance conducted during military deployments, focusing on models for assessing the impact of operational deployments on peacekeepers. A discussion of the stressors and potential mental health consequences of peacekeeping operations follows with relevant examples of findings from U.S. and international military forces. Psychological screening in different peacekeeping operations conducted in U.S. Army-Europe is reviewed. The review begins with the redeployment screening of military personnel deployed to Bosnia mandated under the Joint Medical Surveillance Program, and continues through the present screening of units deployed to Kosovo. The detailed description of the screening program includes a discussion of procedures and measures and demonstrates the evolution of the program. A summary of key findings from the screening program and a discussion of future research directions are provided.

Broadening Participation of Women and Underrepresented Minorities in STEM through a Hybrid Online Transfer Program

PubMed Central

Drew, Jennifer C.; Galindo-Gonzalez, Sebastian; Ardissone, Alexandria N.; Triplett, Eric W.

2016-01-01

The Microbiology and Cell Science (MCS) Department at the University of Florida (UF) developed a new model of a 2 + 2 program that uses a hybrid online approach to bring its science, technology, engineering, and mathematics (STEM) curriculum to students. In this paradigm, 2-year graduates transfer as online students into the Distance Education in MCS (DE MCS) bachelor of science program. The program has broadened access to STEM with a steadily increasing enrollment that does not draw students away from existing on-campus programs. Notably, half of the DE MCS students are from underrepresented minority (URM) backgrounds and two-thirds are women, which represents a greater level of diversity than the corresponding on-campus cohort and the entire university. Additionally, the DE MCS cohort has comparable retention and academic performance compared with the on-campus transfer cohort. Of those who have earned a BS through the DE MCS program, 71% are women and 61% are URM. Overall, these data demonstrate that the hybrid online approach is successful in increasing diversity and provides another viable route in the myriad of STEM pathways. As the first of its kind in a STEM field, the DE MCS program serves as a model for programs seeking to broaden their reach. PMID:27587859

A brief overview of computational structures technology related activities at NASA Lewis Research Center

NASA Technical Reports Server (NTRS)

Hopkins, Dale A.

1992-01-01

The presentation gives a partial overview of research and development underway in the Structures Division of LeRC, which collectively is referred to as the Computational Structures Technology Program. The activities in the program are diverse and encompass four major categories: (1) composite materials and structures; (2) probabilistic analysis and reliability; (3) design optimization and expert systems; and (4) computational methods and simulation. The approach of the program is comprehensive and entails exploration of fundamental theories of structural mechanics to accurately represent the complex physics governing engine structural performance, formulation, and implementation of computational techniques and integrated simulation strategies to provide accurate and efficient solutions of the governing theoretical models by exploiting the emerging advances in computer technology, and validation and verification through numerical and experimental tests to establish confidence and define the qualities and limitations of the resulting theoretical models and computational solutions. The program comprises both in-house and sponsored research activities. The remainder of the presentation provides a sample of activities to illustrate the breadth and depth of the program and to demonstrate the accomplishments and benefits that have resulted.

Options for demonstrating the use of solar energy in california buildings

NASA Technical Reports Server (NTRS)

Davis, E. S.; Yanow, G.

1976-01-01

Three programmatic options for demonstrating the most economically attractive applications of solar energy to buildings located in California are formulated. The unique characteristics of solar energy demonstration programs and the involvement of key decision makers are discussed in detail. The demonstration programs are related to specific purposes. The priority structure used to select the generic projects making up each program is discussed in relationship to the purposes of the program. In addition, some implications of the nature of the demonstration program for management are outlined.

A Universal Model for Solar Eruptions

NASA Astrophysics Data System (ADS)

Wyper, Peter; Antiochos, Spiro K.; DeVore, C. Richard

2017-08-01

We present a universal model for solar eruptions that encompasses coronal mass ejections (CMEs) at one end of the scale, to coronal jets at the other. The model is a natural extension of the Magnetic Breakout model for large-scale fast CMEs. Using high-resolution adaptive mesh MHD simulations conducted with the ARMS code, we show that so-called blowout or mini-filament coronal jets can be explained as one realisation of the breakout process. We also demonstrate the robustness of this “breakout-jet” model by studying three realisations in simulations with different ambient field inclinations. We conclude that magnetic breakout supports both large-scale fast CMEs and small-scale coronal jets, and by inference eruptions at scales in between. Thus, magnetic breakout provides a unified model for solar eruptions. P.F.W was supported in this work by an award of a RAS Fellowship and an appointment to the NASA Postdoctoral Program. C.R.D and S.K.A were supported by NASA’s LWS TR&T and H-SR programs.

Evaluating the impact of implementation factors on family-based prevention programming: methods for strengthening causal inference.

PubMed

Crowley, D Max; Coffman, Donna L; Feinberg, Mark E; Greenberg, Mark T; Spoth, Richard L

2014-04-01

Despite growing recognition of the important role implementation plays in successful prevention efforts, relatively little work has sought to demonstrate a causal relationship between implementation factors and participant outcomes. In turn, failure to explore the implementation-to-outcome link limits our understanding of the mechanisms essential to successful programming. This gap is partially due to the inability of current methodological procedures within prevention science to account for the multitude of confounders responsible for variation in implementation factors (i.e., selection bias). The current paper illustrates how propensity and marginal structural models can be used to improve causal inferences involving implementation factors not easily randomized (e.g., participant attendance). We first present analytic steps for simultaneously evaluating the impact of multiple implementation factors on prevention program outcome. Then, we demonstrate this approach for evaluating the impact of enrollment and attendance in a family program, over and above the impact of a school-based program, within PROSPER, a large-scale real-world prevention trial. Findings illustrate the capacity of this approach to successfully account for confounders that influence enrollment and attendance, thereby more accurately representing true causal relations. For instance, after accounting for selection bias, we observed a 5% reduction in the prevalence of 11th grade underage drinking for those who chose to receive a family program and school program compared to those who received only the school program. Further, we detected a 7% reduction in underage drinking for those with high attendance in the family program.

Evaluation of Salud Para Su Corazón (Health for your Heart) -- National Council of La Raza Promotora Outreach Program.

PubMed

Balcázar, Héctor; Alvarado, Matilde; Hollen, Mary Luna; Gonzalez-Cruz, Yanira; Pedregón, Verónica

2005-07-01

In 2001, the National Heart, Lung, and Blood Institute partnered with the National Council of La Raza to conduct a pilot test of its community-based outreach program Salud Para Su Corazón (Health for Your Heart), which aims to reduce the burden of morbidity and mortality associated with cardiovascular disease among Latinos. The effectiveness of promotores de salud (community health workers) in improving heart-healthy behaviors among Latino families participating in the pilot program at seven sites was evaluated. Data on the characteristics of the promotores in the Salud Para Su Corazón program were compiled. Promotores collected data on family risk factors, health habits, referrals and screenings, information sharing, and program satisfaction from 223 participating Latino families (320 individual family members) through questionnaires. Paired t tests and chi-square tests were used to measure pretest-posttest differences among program participants. Results demonstrated the effectiveness of the promotora model in improving heart-healthy behaviors, promoting community referrals and screenings, enhancing information sharing beyond families, and satisfying participants' expectations of the program. The main outcome of interest was the change in heart-healthy behaviors among families. The community outreach model worked well in the seven pilot programs because of the successes of the promotores and the support of the community-based organizations. Successes stemmed in part from the train-the-trainer approach. Promotoria, as implemented in this program, has the potential to be integrated with a medical model of patient care for primary, secondary, and tertiary prevention.

Model-Based Linkage Analysis of a Quantitative Trait.

PubMed

Song, Yeunjoo E; Song, Sunah; Schnell, Audrey H

2017-01-01

Linkage Analysis is a family-based method of analysis to examine whether any typed genetic markers cosegregate with a given trait, in this case a quantitative trait. If linkage exists, this is taken as evidence in support of a genetic basis for the trait. Historically, linkage analysis was performed using a binary disease trait, but has been extended to include quantitative disease measures. Quantitative traits are desirable as they provide more information than binary traits. Linkage analysis can be performed using single-marker methods (one marker at a time) or multipoint (using multiple markers simultaneously). In model-based linkage analysis the genetic model for the trait of interest is specified. There are many software options for performing linkage analysis. Here, we use the program package Statistical Analysis for Genetic Epidemiology (S.A.G.E.). S.A.G.E. was chosen because it also includes programs to perform data cleaning procedures and to generate and test genetic models for a quantitative trait, in addition to performing linkage analysis. We demonstrate in detail the process of running the program LODLINK to perform single-marker analysis, and MLOD to perform multipoint analysis using output from SEGREG, where SEGREG was used to determine the best fitting statistical model for the trait.

Leveraging model-informed approaches for drug discovery and development in the cardiovascular space.

PubMed

Dockendorf, Marissa F; Vargo, Ryan C; Gheyas, Ferdous; Chain, Anne S Y; Chatterjee, Manash S; Wenning, Larissa A

2018-06-01

Cardiovascular disease remains a significant global health burden, and development of cardiovascular drugs in the current regulatory environment often demands large and expensive cardiovascular outcome trials. Thus, the use of quantitative pharmacometric approaches which can help enable early Go/No Go decision making, ensure appropriate dose selection, and increase the likelihood of successful clinical trials, have become increasingly important to help reduce the risk of failed cardiovascular outcomes studies. In addition, cardiovascular safety is an important consideration for many drug development programs, whether or not the drug is designed to treat cardiovascular disease; modeling and simulation approaches also have utility in assessing risk in this area. Herein, examples of modeling and simulation applied at various stages of drug development, spanning from the discovery stage through late-stage clinical development, for cardiovascular programs are presented. Examples of how modeling approaches have been utilized in early development programs across various therapeutic areas to help inform strategies to mitigate the risk of cardiovascular-related adverse events, such as QTc prolongation and changes in blood pressure, are also presented. These examples demonstrate how more informed drug development decisions can be enabled by modeling and simulation approaches in the cardiovascular area.

Solving bi-level optimization problems in engineering design using kriging models

NASA Astrophysics Data System (ADS)

Xia, Yi; Liu, Xiaojie; Du, Gang

2018-05-01

Stackelberg game-theoretic approaches are applied extensively in engineering design to handle distributed collaboration decisions. Bi-level genetic algorithms (BLGAs) and response surfaces have been used to solve the corresponding bi-level programming models. However, the computational costs for BLGAs often increase rapidly with the complexity of lower-level programs, and optimal solution functions sometimes cannot be approximated by response surfaces. This article proposes a new method, namely the optimal solution function approximation by kriging model (OSFAKM), in which kriging models are used to approximate the optimal solution functions. A detailed example demonstrates that OSFAKM can obtain better solutions than BLGAs and response surface-based methods, and at the same time reduce the workload of computation remarkably. Five benchmark problems and a case study of the optimal design of a thin-walled pressure vessel are also presented to illustrate the feasibility and potential of the proposed method for bi-level optimization in engineering design.

A predictive modeling approach to increasing the economic effectiveness of disease management programs.

PubMed

Bayerstadler, Andreas; Benstetter, Franz; Heumann, Christian; Winter, Fabian

2014-09-01

Predictive Modeling (PM) techniques are gaining importance in the worldwide health insurance business. Modern PM methods are used for customer relationship management, risk evaluation or medical management. This article illustrates a PM approach that enables the economic potential of (cost-) effective disease management programs (DMPs) to be fully exploited by optimized candidate selection as an example of successful data-driven business management. The approach is based on a Generalized Linear Model (GLM) that is easy to apply for health insurance companies. By means of a small portfolio from an emerging country, we show that our GLM approach is stable compared to more sophisticated regression techniques in spite of the difficult data environment. Additionally, we demonstrate for this example of a setting that our model can compete with the expensive solutions offered by professional PM vendors and outperforms non-predictive standard approaches for DMP selection commonly used in the market.

Solving large-scale fixed cost integer linear programming models for grid-based location problems with heuristic techniques

NASA Astrophysics Data System (ADS)

Noor-E-Alam, Md.; Doucette, John

2015-08-01

Grid-based location problems (GBLPs) can be used to solve location problems in business, engineering, resource exploitation, and even in the field of medical sciences. To solve these decision problems, an integer linear programming (ILP) model is designed and developed to provide the optimal solution for GBLPs considering fixed cost criteria. Preliminary results show that the ILP model is efficient in solving small to moderate-sized problems. However, this ILP model becomes intractable in solving large-scale instances. Therefore, a decomposition heuristic is proposed to solve these large-scale GBLPs, which demonstrates significant reduction of solution runtimes. To benchmark the proposed heuristic, results are compared with the exact solution via ILP. The experimental results show that the proposed method significantly outperforms the exact method in runtime with minimal (and in most cases, no) loss of optimality.

DNA strand displacement system running logic programs.

PubMed

Rodríguez-Patón, Alfonso; Sainz de Murieta, Iñaki; Sosík, Petr

2014-01-01

The paper presents a DNA-based computing model which is enzyme-free and autonomous, not requiring a human intervention during the computation. The model is able to perform iterated resolution steps with logical formulae in conjunctive normal form. The implementation is based on the technique of DNA strand displacement, with each clause encoded in a separate DNA molecule. Propositions are encoded assigning a strand to each proposition p, and its complementary strand to the proposition ¬p; clauses are encoded comprising different propositions in the same strand. The model allows to run logic programs composed of Horn clauses by cascading resolution steps. The potential of the model is demonstrated also by its theoretical capability of solving SAT. The resulting SAT algorithm has a linear time complexity in the number of resolution steps, whereas its spatial complexity is exponential in the number of variables of the formula. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Recent Progress on Labfit: a Multispectrum Analysis Program for Fitting Lineshapes Including the Htp Model and Temperature Dependence

NASA Astrophysics Data System (ADS)

Cich, Matthew J.; Guillaume, Alexandre; Drouin, Brian; Benner, D. Chris

2017-06-01

Multispectrum analysis can be a challenge for a variety of reasons. It can be computationally intensive to fit a proper line shape model especially for high resolution experimental data. Band-wide analyses including many transitions along with interactions, across many pressures and temperatures are essential to accurately model, for example, atmospherically relevant systems. Labfit is a fast multispectrum analysis program originally developed by D. Chris Benner with a text-based interface. More recently at JPL a graphical user interface was developed with the goal of increasing the ease of use but also the number of potential users. The HTP lineshape model has been added to Labfit keeping it up-to-date with community standards. Recent analyses using labfit will be shown to demonstrate its ability to competently handle large experimental datasets, including high order lineshape effects, that are otherwise unmanageable.

An Information-theoretic Approach to Optimize JWST Observations and Retrievals of Transiting Exoplanet Atmospheres

NASA Astrophysics Data System (ADS)

Howe, Alex R.; Burrows, Adam; Deming, Drake

2017-01-01

We provide an example of an analysis to explore the optimization of observations of transiting hot Jupiters with the James Webb Space Telescope (JWST) to characterize their atmospheres based on a simple three-parameter forward model. We construct expansive forward model sets for 11 hot Jupiters, 10 of which are relatively well characterized, exploring a range of parameters such as equilibrium temperature and metallicity, as well as considering host stars over a wide range in brightness. We compute posterior distributions of our model parameters for each planet with all of the available JWST spectroscopic modes and several programs of combined observations and compute their effectiveness using the metric of estimated mutual information per degree of freedom. From these simulations, clear trends emerge that provide guidelines for designing a JWST observing program. We demonstrate that these guidelines apply over a wide range of planet parameters and target brightnesses for our simple forward model.

Project Developmental Continuity Evaluation: Final Report. Appendices to Volume I.

ERIC Educational Resources Information Center

Bond, James T.; And Others

This document provides the appendices for volume 1 of the final evaluation report of Project Developmental Continuity (PDC), a Head Start demonstration project initiated in 1974 to develop program models which enhance children's social competence by fostering developmental continuity from preschool through the early elementary grades.…

Computer assisted spirometry.

PubMed

Hansen, D J; Toy, V M; Deininger, R A; Collopy, T K

1983-06-01

Three of the most popular microcomputers, the TRS-80 Model I, the APPLE II+, and the IBM Personal Computer were connected to a spirometer for data acquisition and analysis. Simple programs were written which allow the collection, analysis and storage of the data produced during spirometry. Three examples demonstrate the relative ease for automating spirometers.

Evaluation of a Research Experiences for Undergraduates Program in ChE Indicates Benefit from a Collaborative Model

ERIC Educational Resources Information Center

Follmer, D. Jake; Gomez, Esther; Zappe, Sarah; Kumar, Manish

2017-01-01

This study examined how a collaborative research environment in a structured research experience impacts undergraduate student outcomes. Students demonstrated significant gains in research skills and provided positive appraisals of their collaborative experiences. Emphasis on collaboration among students in an undergraduate research program…

Situational Leadership and Innovation in the EFL Classroom.

ERIC Educational Resources Information Center

Osburne, Andrea G.

A case-study approach is presented to demonstrate how to use situational leadership (a management theory model developed by Hersey and Blanchard) to make students in teacher education programs more receptive to educational innovation in second language learning. Situational leadership theory defines a leader as anyone trying to influence another…

40 CFR 60.2710 - How do I demonstrate continuous compliance with the amended emission limitations and the...

Code of Federal Regulations, 2013 CFR

2013-07-01

... of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF... Solid Waste Incineration Units Model Rule-Continuous Compliance Requirements § 60.2710 How do I...) Compliance with standards. (1) The emission standards and operating requirements set forth in this subpart...

40 CFR 60.2710 - How do I demonstrate continuous compliance with the amended emission limitations and the...

Code of Federal Regulations, 2014 CFR

2014-07-01

... of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) STANDARDS OF... Solid Waste Incineration Units Model Rule-Continuous Compliance Requirements § 60.2710 How do I...) Compliance with standards. (1) The emission standards and operating requirements set forth in this subpart...

Self-Directed Workplace Literacy Distance Learning for Developmental Disabilities Workers. Final Report.

ERIC Educational Resources Information Center

Denny, Verna Haskins

The Self-Directed Workplace Literacy Distance Learning Project demonstrated a model workplace literacy program that helped direct care workers in state-operated developmental disabilities facilities improve their literacy skills for a changing workplace. During the project, 268 New York State Office of Mental Retardation and Developmental…

Quick Prototyping of Educational Software: An Object-Oriented Approach.

ERIC Educational Resources Information Center

Wong, Simon C-H

1994-01-01

Introduces and demonstrates a quick-prototyping model for educational software development that can be used by teachers developing their own courseware using an object-oriented programming system. Development of a courseware package called "The Match-Maker" is explained as an example that uses HyperCard for quick prototyping. (Contains…

A "Worry Doctor" for Preschool Directors and Teachers: A Collaborative Model.

ERIC Educational Resources Information Center

Manning, Diane; And Others

1996-01-01

Notes that mental health is important to children as well as early childhood educators. Suggests the use of child psychoanalysts as demonstrated by the Houston-Galveston Psychoanalytic Institute. Describes the implementation of such programs to assist directors and teachers. Provides a list of American Psychoanalytic Association affiliate…

Emergent Reader--Mid-Year: A Demonstration of Book Buddies in Action. [Videotape].

ERIC Educational Resources Information Center

Invernizzi, Marcia; Juel, Connie

The "Book Buddies" manual and "Emergent Reader" training videos provide comprehensive and easy-to-implement guidelines for setting up and running a successful tutorial program in the early grades. Portraying the "Book Buddies" model in practice, this 44-minute videotape, entitled "Emergent Reader--Mid-Year"…

Workplace Literacy Demonstration Project.

ERIC Educational Resources Information Center

Kissack, Tessie Saenz, Comp.; Clymer-Spradling, Carol, Ed.

A model workplace literacy program is described that was designed to upgrade the basic skills of adult workers and developed by El Paso Community College in partnership with J&J Register Company, a Texas division of Philips Industries with approximately 300 workers. Pre-assessment results indicated that about 95 percent of the workers had…

An Alternating Treatment Comparison of Oral and Total Communication Training Programs with Echolalic Autistic Children.

ERIC Educational Resources Information Center

Barrera, Richardo D.; Sulzer-Azaroff, Beth

1983-01-01

Comparison of the relative effectiveness of oral and total communication training models for teaching expressive labeling skills to three echolalic autistic children (six-nine years old) demonstrated that total communication was the most successful approach with each of the Ss. (Author/CL)

Software Partitioning Schemes for Advanced Simulation Computer Systems. Final Report.

ERIC Educational Resources Information Center

Clymer, S. J.

Conducted to design software partitioning techniques for use by the Air Force to partition a large flight simulator program for optimal execution on alternative configurations, this study resulted in a mathematical model which defines characteristics for an optimal partition, and a manually demonstrated partitioning algorithm design which…

Making DATA Work: A Process for Conducting Action Research

ERIC Educational Resources Information Center

Young, Anita; Kaffenberger, Carol

2013-01-01

This conceptual model introduces a process to help school counselors use data to drive decision making and offers examples to implement the process. A step-by-step process is offered to help school counselors and school counselor supervisors address educational issues, close achievement gaps, and demonstrate program effectiveness. To illustrate…

Establishing Factor Validity Using Variable Reduction in Confirmatory Factor Analysis.

ERIC Educational Resources Information Center

Hofmann, Rich

1995-01-01

Using a 21-statement attitude-type instrument, an iterative procedure for improving confirmatory model fit is demonstrated within the context of the EQS program of P. M. Bentler and maximum likelihood factor analysis. Each iteration systematically eliminates the poorest fitting statement as identified by a variable fit index. (SLD)

40 CFR 63.5710 - How do I demonstrate compliance using emissions averaging?

Code of Federal Regulations, 2010 CFR

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES National Emission Standards for Hazardous Air Pollutants for Boat Manufacturing Standards for Open... section to compute the weighted-average MACT model point value for each open molding resin and gel coat...

Rat Models of Cardiovascular Disease Demonstrate Distinctive Pulmonary Gene Expressions for Vascular Response Genes: Impact of Ozone Exposure

EPA Science Inventory

Comparative gene expression profiling of multiple tissues from rat strains with genetic predisposition to diverse cardiovascular diseases (CVD) can help decode the transcriptional program that governs organ-specific functions. We examined expressions of CVD genes in the lungs of ...

Architectural Considerations for an Educational Research Center for Child Development (ERCCD).

ERIC Educational Resources Information Center

Linder, Ronald

Architectural considerations and recommendations to facilitate the work of an Educational Research Center for Child Development are presented. The purposes of the center are to demonstrate model programs for children, train student and child development professionals, and facilitate and disseminate research on young children. Program…

Emergent Reader--Day One: A Demonstration of Book Buddies in Action. [Videotape].

ERIC Educational Resources Information Center

Invernizzi, Marcia; Juel, Connie

The "Book Buddies" manual and "Emergent Reader" training videos provide comprehensive and easy-to-implement guidelines for setting up and running a successful tutorial program in the early grades. Portraying the "Book Buddies" model in practice, this 51-minute videotape entitled "Emergent Reader--Day One"…

Consultation and the TADS Experience. Occasional Paper Number 1.

ERIC Educational Resources Information Center

Trohanis, Pascal L.; And Others

During the past 10 years, the Technical Assistance Development System's (TADS) staff and advisory board members along with 500 other people have provided consultation services to model demonstration programs and state education agencies that help young handicapped children and their families. Consultants are usually located through a sponsor or…

The Development of a Needs Assessment Process. Occasional Paper Number 3.

ERIC Educational Resources Information Center

Black, Talbot; And Others

The paper considers the concept of needs assessment in terms of the activities of TADS (Technical Assistance Development System), a project to provide support services to model demonstration projects and state education agency grantees of the Handicapped Children's Early Education Program. Section 1 defines needs assessment, describes approaches…

Remotely piloted vehicle: Application of the GRASP analysis method

NASA Technical Reports Server (NTRS)

Andre, W. L.; Morris, J. B.

1981-01-01

The application of General Reliability Analysis Simulation Program (GRASP) to the remotely piloted vehicle (RPV) system is discussed. The model simulates the field operation of the RPV system. By using individual component reliabilities, the overall reliability of the RPV system is determined. The results of the simulations are given in operational days. The model represented is only a basis from which more detailed work could progress. The RPV system in this model is based on preliminary specifications and estimated values. The use of GRASP from basic system definition, to model input, and to model verification is demonstrated.

Presentation on the Modeling and Educational Demonstrations Laboratory Curriculum Materials Center (MEDL-CMC): A Working Model and Progress Report

NASA Astrophysics Data System (ADS)

Glesener, G. B.; Vican, L.

2015-12-01

Physical analog models and demonstrations can be effective educational tools for helping instructors teach abstract concepts in the Earth, planetary, and space sciences. Reducing the learning challenges for students using physical analog models and demonstrations, however, can often increase instructors' workload and budget because the cost and time needed to produce and maintain such curriculum materials is substantial. First, this presentation describes a working model for the Modeling and Educational Demonstrations Laboratory Curriculum Materials Center (MEDL-CMC) to support instructors' use of physical analog models and demonstrations in the science classroom. The working model is based on a combination of instructional resource models developed by the Association of College & Research Libraries and by the Physics Instructional Resource Association. The MEDL-CMC aims to make the curriculum materials available for all science courses and outreach programs within the institution where the MEDL-CMC resides. The sustainability and value of the MEDL-CMC comes from its ability to provide and maintain a variety of physical analog models and demonstrations in a wide range of science disciplines. Second, the presentation then reports on the development, progress, and future of the MEDL-CMC at the University of California Los Angeles (UCLA). Development of the UCLA MEDL-CMC was funded by a grant from UCLA's Office of Instructional Development and is supported by the Department of Earth, Planetary, and Space Sciences. Other UCLA science departments have recently shown interest in the UCLA MEDL-CMC services, and therefore, preparations are currently underway to increase our capacity for providing interdepartmental service. The presentation concludes with recommendations and suggestions for other institutions that wish to start their own MEDL-CMC in order to increase educational effectiveness and decrease instructor workload. We welcome an interuniversity collaboration to further develop the MEDL-CMC model.

Abdominal surgery process modeling framework for simulation using spreadsheets.

PubMed

Boshkoska, Biljana Mileva; Damij, Talib; Jelenc, Franc; Damij, Nadja

2015-08-01

We provide a continuation of the existing Activity Table Modeling methodology with a modular spreadsheets simulation. The simulation model developed is comprised of 28 modeling elements for the abdominal surgery cycle process. The simulation of a two-week patient flow in an abdominal clinic with 75 beds demonstrates the applicability of the methodology. The simulation does not include macros, thus programming experience is not essential for replication or upgrading the model. Unlike the existing methods, the proposed solution employs a modular approach for modeling the activities that ensures better readability, the possibility of easily upgrading the model with other activities, and its easy extension and connectives with other similar models. We propose a first-in-first-served approach for simulation of servicing multiple patients. The uncertain time duration of the activities is modeled using the function "rand()". The patients movements from one activity to the next one is tracked with nested "if()" functions, thus allowing easy re-creation of the process without the need of complex programming. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.

A pilot demonstration of comprehensive mental health services in inner-city public schools.

PubMed

Walter, Heather J; Gouze, Karen; Cicchetti, Colleen; Arend, Richard; Mehta, Tara; Schmidt, Janet; Skvarla, Madelynn

2011-04-01

National policy statements increasingly espouse the delivery of comprehensive mental health services in schools. In response to the limited evidence supporting this recommendation, the purpose of this study was to assess the need for, and feasibility, desirability, and outcomes of a full model of comprehensive mental health services in 2 public elementary schools in inner-city neighborhoods. The program, based upon a national model for comprehensive school mental health services, comprised universal and indicated preventive as well as clinical interventions designed to target needs identified in a baseline screening survey. The program was implemented over 1 school year by mental health professionals in collaboration with school teachers. Mental health outcomes comparing baseline to follow-up data were assessed in multiple domains among students and teachers. After 1 year of intervention, students had significantly fewer mental health difficulties, less functional impairment, and improved behavior, and reported improved mental health knowledge, attitudes, beliefs, and behavioral intentions. Teachers reported significantly greater proficiency in managing mental health problems in their classrooms. School staff overwhelmingly endorsed satisfaction with the program. If the observed favorable findings from this pilot demonstration can be replicated in methodologically rigorous studies, additional support would be garnered for national policy recommendations about comprehensive school mental health services. © 2011, American School Health Association.

Fuel-Flexible Gasification-Combustion Technology for Production of H2 and Sequestration-Ready CO2

DOE Office of Scientific and Technical Information (OSTI.GOV)

George Rizeq; Janice West; Raul Subia

GE Global Research is developing an innovative energy technology for coal gasification with high efficiency and near-zero pollution. This Unmixed Fuel Processor (UFP) technology simultaneously converts coal, steam and air into three separate streams of hydrogen-rich gas, sequestration-ready CO{sub 2}, and high-temperature, high-pressure vitiated air to produce electricity in gas turbines. This is the draft final report for the first stage of the DOE-funded Vision 21 program. The UFP technology development program encompassed lab-, bench- and pilot-scale studies to demonstrate the UFP concept. Modeling and economic assessments were also key parts of this program. The chemical and mechanical feasibility weremore » established via lab and bench-scale testing, and a pilot plant was designed, constructed and operated, demonstrating the major UFP features. Experimental and preliminary modeling results showed that 80% H{sub 2} purity could be achieved, and that a UFP-based energy plant is projected to meet DOE efficiency targets. Future work will include additional pilot plant testing to optimize performance and reduce environmental, operability and combined cycle integration risks. Results obtained to date have confirmed that this technology has the potential to economically meet future efficiency and environmental performance goals.« less

Vocational exploration in an extracurricular technology program for youth with autism.

PubMed

Dunn, Louise; Diener, Marissa; Wright, Cheryl; Wright, Scott; Narumanchi, Amruta

2015-01-01

Within a life span approach, introducing opportunities to explore careers through activities of interest provide ways for children to learn to explore, problem solve, and envision a future for themselves. However, little information exists about programs to promote social engagement and to explore potential career interests for youth with autism. Explore engagement and learning in a technology-based extracurricular program (called iSTAR) for youth with autism. The researchers used a qualitative approach with grounded-theory analysis to explore the processes that contributed to engagement and learning for youth with autism in an technology-based extracurricular program. Youth Centered Learning and Opportunities to Demonstrate Skills emerged as themes that illuminated the processes by which engagement and learning occurred for the youth in the iSTAR program. Interest in the graphics program stimulated interactions amongst the youth with each other and with the adults. Modeling, demonstration, and scaffolded questioning supported engagement and learning for all the youth. Providing structure, encouraging choices, and following the youths' lead provided bridges for sharing and learning about the technology program. Career exploration through use of interests in technology can provide opportunities for youth with autism to develop social and technical skills needed later for employment. Providing an environment that recognizes and builds on the youths' strengths and supports their autonomy and choices are critical components to promote their positive development and career potential.

An intelligent CNC machine control system architecture

DOE Office of Scientific and Technical Information (OSTI.GOV)

Miller, D.J.; Loucks, C.S.

1996-10-01

Intelligent, agile manufacturing relies on automated programming of digitally controlled processes. Currently, processes such as Computer Numerically Controlled (CNC) machining are difficult to automate because of highly restrictive controllers and poor software environments. It is also difficult to utilize sensors and process models for adaptive control, or to integrate machining processes with other tasks within a factory floor setting. As part of a Laboratory Directed Research and Development (LDRD) program, a CNC machine control system architecture based on object-oriented design and graphical programming has been developed to address some of these problems and to demonstrate automated agile machining applications usingmore » platform-independent software.« less

Controlled Ecological Life Support System: Research and Development Guidelines

NASA Technical Reports Server (NTRS)

Mason, R. M. (Editor); Carden, J. L. (Editor)

1982-01-01

Results of a workshop designed to provide a base for initiating a program of research and development of controlled ecological life support systems (CELSS) are summarized. Included are an evaluation of a ground based manned demonstration as a milestone in CELSS development, and a discussion of development requirements for a successful ground based CELSS demonstration. Research recommendations are presented concerning the following topics: nutrition and food processing, food production, waste processing, systems engineering and modelling, and ecology-systems safety.

Commercially Hosted Government Payloads: Lessons from Recent Programs

NASA Technical Reports Server (NTRS)

Andraschko, Mark A.; Antol, Jeffrey; Horan, Stephen; Neil, Doreen

2011-01-01

In a commercially hosted operational mode, a scientific instrument or operational device is attached to a spacecraft but operates independently from the spacecraft s primary mission. Despite the expected benefits of this arrangement, there are few examples of hosted payload programs actually being executed by government organizations. The lack of hosted payload programs is largely driven by programmatic challenges, both real and perceived, rather than by technical challenges. Partly for these reasons, NASA has not sponsored a hosted payload program, in spite of the benefits and visible community interest in doing so. In the interest of increasing the use of hosted payloads across the space community, this paper seeks to alleviate concerns about hosted payloads by identifying these programmatic challenges and presenting ways in which they can be avoided or mitigated. Despite the challenges, several recent hosted payload programs have been successfully completed or are currently in progress. This paper presents an assessment of these programs, with a focus on acquisition, costs, schedules, risks, and other programmatic aspects. The hosted payloads included in this study are the Federal Aviation Administration's Wide Area Augmentation System (WAAS) payloads, United States Coast Guard's Automatic Identification System (AIS) demonstration payload, Department of Defense's IP Router In Space (IRIS) demonstration payload, the United States Air Force's Commercially Hosted Infrared Payload (CHIRP), and the Australian Defence Force's Ultra High Frequency (UHF) payload. General descriptions of each of these programs are presented along with issues that have been encountered and lessons learned from those experiences. A set of recommended approaches for future hosted payload programs is presented, with a focus on addressing risks or potential problem areas through smart and flexible contracting up front. This set of lessons and recommendations is broadly applicable to future hosted payload programs, whether they are technology demonstrations, communications systems, or operational sensors. Additionally, we present a basic cost model for commercial access to space for hosted payloads as a function of payload mass

The DUDES Club

PubMed Central

Gross, Paul A.; Efimoff, Iloradanon; Patrick, Lyana; Josewski, Viviane; Hau, Keith; Lambert, Sandy; Smye, Victoria

2016-01-01

Abstract Problem addressed In Canada, there are few health promotion programs for men, particularly programs focused on indigenous and other men marginalized by social and structural inequities. Objective of program To build solidarity and brotherhood among vulnerable men; to promote health through education, dialogue, and health screening clinics; and to help men regain a sense of pride and fulfilment in their lives. Program description The DUDES Club was established in 2010 as a community-based health promotion program for indigenous men in the Downtown Eastside neighbourhood of Vancouver, BC. Between August 2014 and May 2015, 150 men completed an evaluation survey developed using a logic model approach. Responses were analyzed based on the 4 dimensions of the indigenous medicine wheel (mental, physical, emotional, and spiritual). Evaluation results demonstrated high participant satisfaction and positive outcomes across all 4 dimensions of health and well-being: 90.6% of respondents indicated that the DUDES Club program improved their quality of life. Participants who attended meetings more often experienced greater physical, mental, and social benefits (P < .05). Conclusion Findings indicate that this innovative model is effective in promoting the well-being of mainly indigenous men through culturally safe services in an urban community.

Flight Demonstrations of Orbital Space Plane (OSP) Technologies

NASA Technical Reports Server (NTRS)

Turner, Susan

2003-01-01

The Orbital Space Plane (OSP) Program embodies NASA s priority to transport Space Station crews safely, reliably, and affordably, while it empowers the Nation s greater strategies for scientific exploration and space leadership. As early in the development cycle as possible, the OSP will provide crew rescue capability, offering an emergency ride home from the Space Station, while accommodating astronauts who are deconditioned due to long- duration missions, or those that may be ill or injured. As the OSP Program develops a fully integrated system, it will use existing technologies and employ computer modeling and simulation. Select flight demonstrator projects will provide valuable data on launch, orbital, reentry, and landing conditions to validate thermal protection systems, autonomous operations, and other advancements, especially those related to crew safety and survival.

Active Aeroelastic Wing Aerodynamic Model Development and Validation for a Modified F/A-18A Airplane

NASA Technical Reports Server (NTRS)

Cumming, Stephen B.; Diebler, Corey G.

2005-01-01

A new aerodynamic model has been developed and validated for a modified F/A-18A airplane used for the Active Aeroelastic Wing (AAW) research program. The goal of the program was to demonstrate the advantages of using the inherent flexibility of an aircraft to enhance its performance. The research airplane was an F/A-18A with wings modified to reduce stiffness and a new control system to increase control authority. There have been two flight phases. Data gathered from the first flight phase were used to create the new aerodynamic model. A maximum-likelihood output-error parameter estimation technique was used to obtain stability and control derivatives. The derivatives were incorporated into the National Aeronautics and Space Administration F-18 simulation, validated, and used to develop new AAW control laws. The second phase of flights was used to evaluate the handling qualities of the AAW airplane and the control law design process, and to further test the accuracy of the new model. The flight test envelope covered Mach numbers between 0.85 and 1.30 and dynamic pressures from 600 to 1250 pound-force per square foot. The results presented in this report demonstrate that a thorough parameter identification analysis can be used to improve upon models that were developed using other means. This report describes the parameter estimation technique used, details the validation techniques, discusses differences between previously existing F/A-18 models, and presents results from the second phase of research flights.

Development and evaluation of a leadership training program for public health emergency response: results from a Chinese study.

PubMed

Wang, Chongjian; Wei, Sheng; Xiang, Hao; Wu, Jing; Xu, Yihua; Liu, Li; Nie, Shaofa

2008-10-30

Since the 9/11 attack and severe acute respiratory syndrome (SARS), the development of qualified and able public health leaders has become a new urgency in building the infrastructure needed to address public health emergencies. Although previous studies have reported that the training of individual leaders is an important approach, the systemic and scientific training model need further improvement and development. The purpose of this study was to develop, deliver, and evaluate a participatory leadership training program for emergency response. Forty-one public health leaders (N = 41) from five provinces completed the entire emergency preparedness training program in China. The program was evaluated by anonymous questionnaires and semi-structured interviews held prior to training, immediately post-training and 12-month after training (Follow-up). The emergency preparedness training resulted in positive shifts in knowledge, self-assessment of skills for public health leaders. More than ninety-five percent of participants reported that the training model was scientific and feasible. Moreover, the response of participants in the program to the avian influenza outbreak, as well as the planned evaluations for this leadership training program, further demonstrated both the successful approaches and methods and the positive impact of this integrated leadership training initiative. The emergency preparedness training program met its aims and objectives satisfactorily, and improved the emergency capability of public health leaders. This suggests that the leadership training model was effective and feasible in improving the emergency preparedness capability.

Automating Embedded Analysis Capabilities and Managing Software Complexity in Multiphysics Simulation, Part II: Application to Partial Differential Equations

DOE PAGES

Pawlowski, Roger P.; Phipps, Eric T.; Salinger, Andrew G.; ...

2012-01-01

A template-based generic programming approach was presented in Part I of this series of papers [Sci. Program. 20 (2012), 197–219] that separates the development effort of programming a physical model from that of computing additional quantities, such as derivatives, needed for embedded analysis algorithms. In this paper, we describe the implementation details for using the template-based generic programming approach for simulation and analysis of partial differential equations (PDEs). We detail several of the hurdles that we have encountered, and some of the software infrastructure developed to overcome them. We end with a demonstration where we present shape optimization and uncertaintymore » quantification results for a 3D PDE application.« less