Artificial intelligence support for scientific model-building

NASA Technical Reports Server (NTRS)

Keller, Richard M.

1992-01-01

Scientific model-building can be a time-intensive and painstaking process, often involving the development of large and complex computer programs. Despite the effort involved, scientific models cannot easily be distributed and shared with other scientists. In general, implemented scientific models are complex, idiosyncratic, and difficult for anyone but the original scientific development team to understand. We believe that artificial intelligence techniques can facilitate both the model-building and model-sharing process. In this paper, we overview our effort to build a scientific modeling software tool that aids the scientist in developing and using models. This tool includes an interactive intelligent graphical interface, a high-level domain specific modeling language, a library of physics equations and experimental datasets, and a suite of data display facilities.

Near-Source Modeling Updates: Building Downwash & Near-Road

EPA Science Inventory

The presentation describes recent research efforts in near-source model development focusing on building downwash and near-road barriers. The building downwash section summarizes a recent wind tunnel study, ongoing computational fluid dynamics simulations and efforts to improve ...

Identifying determinants of nations' wetland management programs using structural equation modeling: An exploratory analysis

USGS Publications Warehouse

La Peyre, M.K.; Mendelssohn, I.A.; Reams, M.A.; Templet, P.H.; Grace, J.B.

2001-01-01

Integrated management and policy models suggest that solutions to environmental issues may be linked to the socioeconomic and political Characteristics of a nation. In this study, we empirically explore these suggestions by applying them to the wetland management activities of nations. Structural equation modeling was used to evaluate a model of national wetland management effort and one of national wetland protection. Using five predictor variables of social capital, economic capital, environmental and political characteristics, and land-use pressure, the multivariate models were able to explain 60% of the variation in nations' wetland protection efforts based on data from 90 nations, as defined by level of participation, in the international wetland convention. Social capital had the largest direct effect on wetland protection efforts, suggesting that increased social development may eventually lead to better wetland protection. In contrast, increasing economic development had a negative linear relationship with wetland protection efforts, suggesting the need for explicit wetland protection programs as nations continue to focus on economic development. Government, environmental characteristics, and land-use pressure also had a positive direct effect on wetland protection, and mediated the effect of social capital on wetland protection. Explicit wetland protection policies, combined with a focus on social development, would lead to better wetland protection at the national level.

Advances in Scientific Balloon Thermal Modeling

NASA Technical Reports Server (NTRS)

Bohaboj, T.; Cathey, H. M., Jr.

2004-01-01

The National Aeronautics and Space Administration's Balloon Program office has long acknowledged that the accurate modeling of balloon performance and flight prediction is dependant on how well the balloon is thermally modeled. This ongoing effort is focused on developing accurate balloon thermal models that can be used to quickly predict balloon temperatures and balloon performance. The ability to model parametric changes is also a driver for this effort. This paper will present the most recent advances made in this area. This research effort continues to utilize the "Thrmal Desktop" addition to AUTO CAD for the modeling. Recent advances have been made by using this analytical tool. A number of analyses have been completed to test the applicability of this tool to the problem with very positive results. Progressively detailed models have been developed to explore the capabilities of the tool as well as to provide guidance in model formulation. A number of parametric studies have been completed. These studies have varied the shape of the structure, material properties, environmental inputs, and model geometry. These studies have concentrated on spherical "proxy models" for the initial development stages and then to transition to the natural shaped zero pressure and super pressure balloons. An assessment of required model resolution has also been determined. Model solutions have been cross checked with known solutions via hand calculations. The comparison of these cases will also be presented. One goal is to develop analysis guidelines and an approach for modeling balloons for both simple first order estimates and detailed full models. This papa presents the step by step advances made as part of this effort, capabilities, limitations, and the lessons learned. Also presented are the plans for further thermal modeling work.

Electric Propulsion System Modeling for the Proposed Prometheus 1 Mission

NASA Technical Reports Server (NTRS)

Fiehler, Douglas; Dougherty, Ryan; Manzella, David

2005-01-01

The proposed Prometheus 1 spacecraft would utilize nuclear electric propulsion to propel the spacecraft to its ultimate destination where it would perform its primary mission. As part of the Prometheus 1 Phase A studies, system models were developed for each of the spacecraft subsystems that were integrated into one overarching system model. The Electric Propulsion System (EPS) model was developed using data from the Prometheus 1 electric propulsion technology development efforts. This EPS model was then used to provide both performance and mass information to the Prometheus 1 system model for total system trades. Development of the EPS model is described, detailing both the performance calculations as well as its evolution over the course of Phase A through three technical baselines. Model outputs are also presented, detailing the performance of the model and its direct relationship to the Prometheus 1 technology development efforts. These EP system model outputs are also analyzed chronologically showing the response of the model development to the four technical baselines during Prometheus 1 Phase A.

Predicting Motivation: Computational Models of PFC Can Explain Neural Coding of Motivation and Effort-based Decision-making in Health and Disease.

PubMed

Vassena, Eliana; Deraeve, James; Alexander, William H

2017-10-01

Human behavior is strongly driven by the pursuit of rewards. In daily life, however, benefits mostly come at a cost, often requiring that effort be exerted to obtain potential benefits. Medial PFC (MPFC) and dorsolateral PFC (DLPFC) are frequently implicated in the expectation of effortful control, showing increased activity as a function of predicted task difficulty. Such activity partially overlaps with expectation of reward and has been observed both during decision-making and during task preparation. Recently, novel computational frameworks have been developed to explain activity in these regions during cognitive control, based on the principle of prediction and prediction error (predicted response-outcome [PRO] model [Alexander, W. H., & Brown, J. W. Medial prefrontal cortex as an action-outcome predictor. Nature Neuroscience, 14, 1338-1344, 2011], hierarchical error representation [HER] model [Alexander, W. H., & Brown, J. W. Hierarchical error representation: A computational model of anterior cingulate and dorsolateral prefrontal cortex. Neural Computation, 27, 2354-2410, 2015]). Despite the broad explanatory power of these models, it is not clear whether they can also accommodate effects related to the expectation of effort observed in MPFC and DLPFC. Here, we propose a translation of these computational frameworks to the domain of effort-based behavior. First, we discuss how the PRO model, based on prediction error, can explain effort-related activity in MPFC, by reframing effort-based behavior in a predictive context. We propose that MPFC activity reflects monitoring of motivationally relevant variables (such as effort and reward), by coding expectations and discrepancies from such expectations. Moreover, we derive behavioral and neural model-based predictions for healthy controls and clinical populations with impairments of motivation. Second, we illustrate the possible translation to effort-based behavior of the HER model, an extended version of PRO model based on hierarchical error prediction, developed to explain MPFC-DLPFC interactions. We derive behavioral predictions that describe how effort and reward information is coded in PFC and how changing the configuration of such environmental information might affect decision-making and task performance involving motivation.

TOPEX Project Radar Altimeter Development Requirements and Specifications, Version 6.0

NASA Technical Reports Server (NTRS)

Rossi, Laurence C.

2003-01-01

This document provides the guidelines by which the TOPEX Radar Altimeter hardware development effort for the TOPEX flight project shall be implemented and conducted. The conduct of this activity shall take maximum advantage of the efforts expended during the TOPEX Radar Altimeter Advanced Technology Model development program and other related Radar Altimeter development efforts. This document complies with the TOPEX Project Office document 633-420 (D-2218), entitled, "TOPEX Project Requirements and Constraints for the NASA Radar Altimeter" dated December 1987.

Space Flight Cable Model Development

NASA Technical Reports Server (NTRS)

Spak, Kaitlin

2013-01-01

This work concentrates the modeling efforts presented in last year's VSGC conference paper, "Model Development for Cable-Harnessed Beams." The focus is narrowed to modeling of space-flight cables only, as a reliable damped cable model is not yet readily available and is necessary to continue modeling cable-harnessed space structures. New experimental data is presented, eliminating the low-frequency noise that plagued the first year's efforts. The distributed transfer function method is applied to a single section of space flight cable for Euler-Bernoulli and shear beams. The work presented here will be developed into a damped cable model that can be incorporated into an interconnected beam-cable system. The overall goal of this work is to accurately predict natural frequencies and modal damping ratios for cabled space structures.

The Determinants of Student Effort at Learning ERP: A Cultural Perspective

ERIC Educational Resources Information Center

Alshare, Khaled A.; El-Masri, Mazen; Lane, Peggy L.

2015-01-01

This paper develops a research model based on the Unified Theory of Acceptance and Use of Technology model (UTAUT) and Hofstede's cultural dimensions to explore factors that influence student effort at learning Enterprise Resource Planning (ERP) systems. A Structural Equation Model (SEM) using LISREL was utilized to validate the proposed research…

Formal Analysis of the Remote Agent Before and After Flight

NASA Technical Reports Server (NTRS)

Havelund, Klaus; Lowry, Mike; Park, SeungJoon; Pecheur, Charles; Penix, John; Visser, Willem; White, Jon L.

2000-01-01

This paper describes two separate efforts that used the SPIN model checker to verify deep space autonomy flight software. The first effort occurred at the beginning of a spiral development process and found five concurrency errors early in the design cycle that the developers acknowledge would not have been found through testing. This effort required a substantial manual modeling effort involving both abstraction and translation from the prototype LISP code to the PROMELA language used by SPIN. This experience and others led to research to address the gap between formal method tools and the development cycle used by software developers. The Java PathFinder tool which directly translates from Java to PROMELA was developed as part of this research, as well as automatic abstraction tools. In 1999 the flight software flew on a space mission, and a deadlock occurred in a sibling subsystem to the one which was the focus of the first verification effort. A second quick-response "cleanroom" verification effort found the concurrency error in a short amount of time. The error was isomorphic to one of the concurrency errors found during the first verification effort. The paper demonstrates that formal methods tools can find concurrency errors that indeed lead to loss of spacecraft functions, even for the complex software required for autonomy. Second, it describes progress in automatic translation and abstraction that eventually will enable formal methods tools to be inserted directly into the aerospace software development cycle.

Collaborative Project. A Flexible Atmospheric Modeling Framework for the Community Earth System Model (CESM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gettelman, Andrew

2015-10-01

In this project we have been upgrading the Multiscale Modeling Framework (MMF) in the Community Atmosphere Model (CAM), also known as Super-Parameterized CAM (SP-CAM). This has included a major effort to update the coding standards and interface with CAM so that it can be placed on the main development trunk. It has also included development of a new software structure for CAM to be able to handle sub-grid column information. These efforts have formed the major thrust of the work.

The Rayleigh curve as a model for effort distribution over the life of medium scale software systems. M.S. Thesis - Maryland Univ.

NASA Technical Reports Server (NTRS)

Picasso, G. O.; Basili, V. R.

1982-01-01

It is noted that previous investigations into the applicability of Rayleigh curve model to medium scale software development efforts have met with mixed results. The results of these investigations are confirmed by analyses of runs and smoothing. The reasons for the models' failure are found in the subcycle effort data. There are four contributing factors: uniqueness of the environment studied, the influence of holidays, varying management techniques and differences in the data studied.

Mathematical modeling and SAR simulation multifunction SAR technology efforts

NASA Technical Reports Server (NTRS)

Griffin, C. R.; Estes, J. M.

1981-01-01

The orbital SAR (synthetic aperture radar) simulation data was used in several simulation efforts directed toward advanced SAR development. Efforts toward simulating an operational radar, simulation of antenna polarization effects, and simulation of SAR images at serveral different wavelengths are discussed. Avenues for improvements in the orbital SAR simulation and its application to the development of advanced digital radar data processing schemes are indicated.

Infrared Algorithm Development for Ocean Observations with EOS/MODIS

NASA Technical Reports Server (NTRS)

Brown, Otis B.

1997-01-01

Efforts continue under this contract to develop algorithms for the computation of sea surface temperature (SST) from MODIS infrared measurements. This effort includes radiative transfer modeling, comparison of in situ and satellite observations, development and evaluation of processing and networking methodologies for algorithm computation and data accession, evaluation of surface validation approaches for IR radiances, development of experimental instrumentation, and participation in MODIS (project) related activities. Activities in this contract period have focused on radiative transfer modeling, evaluation of atmospheric correction methodologies, undertake field campaigns, analysis of field data, and participation in MODIS meetings.

Thermal performance modeling of NASA s scientific balloons

NASA Astrophysics Data System (ADS)

Franco, H.; Cathey, H.

The flight performance of a scientific balloon is highly dependant on the interaction between the balloon and its environment. The balloon is a thermal vehicle. Modeling a scientific balloon's thermal performance has proven to be a difficult analytical task. Most previous thermal models have attempted these analyses by using either a bulk thermal model approach, or by simplified representations of the balloon. These approaches to date have provided reasonable, but not very accurate results. Improvements have been made in recent years using thermal analysis tools developed for the thermal modeling of spacecraft and other sophisticated heat transfer problems. These tools, which now allow for accurate modeling of highly transmissive materials, have been applied to the thermal analysis of NASA's scientific balloons. A research effort has been started that utilizes the "Thermal Desktop" addition to AUTO CAD. This paper will discuss the development of thermal models for both conventional and Ultra Long Duration super-pressure balloons. This research effort has focused on incremental analysis stages of development to assess the accuracy of the tool and the required model resolution to produce usable data. The first stage balloon thermal analyses started with simple spherical balloon models with a limited number of nodes, and expanded the number of nodes to determine required model resolution. These models were then modified to include additional details such as load tapes. The second stage analyses looked at natural shaped Zero Pressure balloons. Load tapes were then added to these shapes, again with the goal of determining the required modeling accuracy by varying the number of gores. The third stage, following the same steps as the Zero Pressure balloon efforts, was directed at modeling super-pressure pumpkin shaped balloons. The results were then used to develop analysis guidelines and an approach for modeling balloons for both simple first order estimates and detailed full models. The development of the radiative environment and program input files, the development of the modeling techniques for balloons, and the development of appropriate data output handling techniques for both the raw data and data plots will be discussed. A general guideline to match predicted balloon performance with known flight data will also be presented. One long-term goal of this effort is to develop simplified approaches and techniques to include results in performance codes being developed.

Hit Generation in TB Drug Discovery: From Genome to Granuloma

PubMed Central

2018-01-01

Current tuberculosis (TB) drug development efforts are not sufficient to end the global TB epidemic. Recent efforts have focused on the development of whole-cell screening assays because biochemical, target-based inhibitor screens during the last two decades have not delivered new TB drugs. Mycobacterium tuberculosis (Mtb), the causative agent of TB, encounters diverse microenvironments and can be found in a variety of metabolic states in the human host. Due to the complexity and heterogeneity of Mtb infection, no single model can fully recapitulate the in vivo conditions in which Mtb is found in TB patients, and there is no single “standard” screening condition to generate hit compounds for TB drug development. However, current screening assays have become more sophisticated as researchers attempt to mirror the complexity of TB disease in the laboratory. In this review, we describe efforts using surrogates and engineered strains of Mtb to focus screens on specific targets. We explain model culture systems ranging from carbon starvation to hypoxia, and combinations thereof, designed to represent the microenvironment which Mtb encounters in the human body. We outline ongoing efforts to model Mtb infection in the lung granuloma. We assess these different models, their ability to generate hit compounds, and needs for further TB drug development, to provide direction for future TB drug discovery. PMID:29384369

A BRIDGE partnership model for health management education in the Slovak Republic.

PubMed

West, D J; Krcmery, V; Rusnakova, V; Murgas, M

1998-01-01

An innovative Health Management Education Partnership (HMEP) was initiated to develop management education initiatives through the exchange of information and ideas. Health education efforts, projects and activities exist between the University of Scranton and three strategic partners in the Slovak Republic: Trnava University, the Health Management School and the University of Matej Bel. The BRIDGE model (Building Relationships in Developing and Growing Economies) utilizes several innovative educational initiatives and strategic projects including a professional journal, faculty development, professional development, curriculum development, certification and accreditation, faculty-students exchange and development of educational materials and modules. The BRIDGE organizational structure is reviewed as well as specific workplan objectives to operationalize the HMEP encouraging mutual cooperation, collaboration and sustainability of efforts. The model stresses implementation, monitoring, and evaluation of all initiatives through a strong community effort, focus on research, deployment of educational resources, curriculum modification, development of interpartnership activities, conferences, workshops, fieldwork experiences and study tours. Applied management practices enhance market-oriented solutions to health care delivery problems emphasizing a focus on privatization and entrepreneurship through education.

An examination of data quality on QSAR Modeling in regards ...

EPA Pesticide Factsheets

The development of QSAR models is critically dependent on the quality of available data. As part of our efforts to develop public platforms to provide access to predictive models, we have attempted to discriminate the influence of the quality versus quantity of data available to develop and validate QSAR models. We have focused our efforts on the widely used EPISuite software that was initially developed over two decades ago and, specifically, on the PHYSPROP dataset used to train the EPISuite prediction models. This presentation will review our approaches to examining key datasets, the delivery of curated data and the development of machine-learning models for thirteen separate property endpoints of interest to environmental science. We will also review how these data will be made freely accessible to the community via a new “chemistry dashboard”. This abstract does not reflect U.S. EPA policy. presentation at UNC-CH.

Toward more environmentally resistant gas turbines: Progress in NASA-Lewis programs

NASA Technical Reports Server (NTRS)

Lowell, C. E.; Grisaffe, S. J.; Levine, S. R.

1976-01-01

A wide range of programs are being conducted for improving the environmental resistance to oxidation and hot corrosion of gas turbine and power system materials. They range from fundamental efforts to delineate attack mechanisms, allow attack modeling and permit life prediction, to more applied efforts to develop potentially more resistant alloys and coatings. Oxidation life prediction efforts have resulted in a computer program which provides an initial method for predicting long time metal loss using short time oxidation data by means of a paralinear attack model. Efforts in alloy development have centered on oxide-dispersion strengthened alloys based on the Ni-Cr-Al system. Compositions have been identified which are compromises between oxidation and thermal fatigue resistance. Fundamental studies of hot corrosion mechanisms include thermodynamic studies of sodium sulfate formation during turbine combustion. Information concerning species formed during the vaporization of Na2SO4 has been developed using high temperature mass spectrometry.

CHLORINE DEMAND AND TTHM FORMATION KINETICS: A SECOND-ORDER MODEL

EPA Science Inventory

Much effort has been expended in attempting to develop mathematical models for chlorine demand in water and wastewater. Most of these efforts have centered around the use of first-order functions or modifications of first-order functions. Recently there has also been interest i...

A Short Review of Ablative-Material Response Models and Simulation Tools

NASA Technical Reports Server (NTRS)

Lachaud, Jean; Magin, Thierry E.; Cozmuta, Ioana; Mansour, Nagi N.

2011-01-01

A review of the governing equations and boundary conditions used to model the response of ablative materials submitted to a high-enthalpy flow is proposed. The heritage of model-development efforts undertaken in the 1960s is extremely clear: the bases of the models used in the community are mathematically equivalent. Most of the material-response codes implement a single model in which the equation parameters may be modified to model different materials or conditions. The level of fidelity of the models implemented in design tools only slightly varies. Research and development codes are generally more advanced but often not as robust. The capabilities of each of these codes are summarized in a color-coded table along with research and development efforts currently in progress.

A physiome interoperability roadmap for personalized drug development

PubMed Central

2016-01-01

The goal of developing therapies and dosage regimes for characterized subgroups of the general population can be facilitated by the use of simulation models able to incorporate information about inter-individual variability in drug disposition (pharmacokinetics), toxicity and response effect (pharmacodynamics). Such observed variability can have multiple causes at various scales, ranging from gross anatomical differences to differences in genome sequence. Relevant data for many of these aspects, particularly related to molecular assays (known as ‘-omics’), are available in online resources, but identification and assignment to appropriate model variables and parameters is a significant bottleneck in the model development process. Through its efforts to standardize annotation with consequent increase in data usability, the human physiome project has a vital role in improving productivity in model development and, thus, the development of personalized therapy regimes. Here, we review the current status of personalized medicine in clinical practice, outline some of the challenges that must be overcome in order to expand its applicability, and discuss the relevance of personalized medicine to the more widespread challenges being faced in drug discovery and development. We then review some of (i) the key data resources available for use in model development and (ii) the potential areas where advances made within the physiome modelling community could contribute to physiologically based pharmacokinetic and physiologically based pharmacokinetic/pharmacodynamic modelling in support of personalized drug development. We conclude by proposing a roadmap to further guide the physiome community in its on-going efforts to improve data usability, and integration with modelling efforts in the support of personalized medicine development. PMID:27051513

A software engineering perspective on environmental modeling framework design: The object modeling system

USDA-ARS?s Scientific Manuscript database

The environmental modeling community has historically been concerned with the proliferation of models and the effort associated with collective model development tasks (e.g., code generation, data provisioning and transformation, etc.). Environmental modeling frameworks (EMFs) have been developed to...

Modeling to Mars: a NASA Model Based Systems Engineering Pathfinder Effort

NASA Technical Reports Server (NTRS)

Phojanamongkolkij, Nipa; Lee, Kristopher A.; Miller, Scott T.; Vorndran, Kenneth A.; Vaden, Karl R.; Ross, Eric P.; Powell, Bobby C.; Moses, Robert W.

2017-01-01

The NASA Engineering Safety Center (NESC) Systems Engineering (SE) Technical Discipline Team (TDT) initiated the Model Based Systems Engineering (MBSE) Pathfinder effort in FY16. The goals and objectives of the MBSE Pathfinder include developing and advancing MBSE capability across NASA, applying MBSE to real NASA issues, and capturing issues and opportunities surrounding MBSE. The Pathfinder effort consisted of four teams, with each team addressing a particular focus area. This paper focuses on Pathfinder team 1 with the focus area of architectures and mission campaigns. These efforts covered the timeframe of February 2016 through September 2016. The team was comprised of eight team members from seven NASA Centers (Glenn Research Center, Langley Research Center, Ames Research Center, Goddard Space Flight Center IV&V Facility, Johnson Space Center, Marshall Space Flight Center, and Stennis Space Center). Collectively, the team had varying levels of knowledge, skills and expertise in systems engineering and MBSE. The team applied their existing and newly acquired system modeling knowledge and expertise to develop modeling products for a campaign (Program) of crew and cargo missions (Projects) to establish a human presence on Mars utilizing In-Situ Resource Utilization (ISRU). Pathfinder team 1 developed a subset of modeling products that are required for a Program System Requirement Review (SRR)/System Design Review (SDR) and Project Mission Concept Review (MCR)/SRR as defined in NASA Procedural Requirements. Additionally, Team 1 was able to perform and demonstrate some trades and constraint analyses. At the end of these efforts, over twenty lessons learned and recommended next steps have been identified.

Interoperability of Neuroscience Modeling Software

PubMed Central

Cannon, Robert C.; Gewaltig, Marc-Oliver; Gleeson, Padraig; Bhalla, Upinder S.; Cornelis, Hugo; Hines, Michael L.; Howell, Fredrick W.; Muller, Eilif; Stiles, Joel R.; Wils, Stefan; De Schutter, Erik

2009-01-01

Neuroscience increasingly uses computational models to assist in the exploration and interpretation of complex phenomena. As a result, considerable effort is invested in the development of software tools and technologies for numerical simulations and for the creation and publication of models. The diversity of related tools leads to the duplication of effort and hinders model reuse. Development practices and technologies that support interoperability between software systems therefore play an important role in making the modeling process more efficient and in ensuring that published models can be reliably and easily reused. Various forms of interoperability are possible including the development of portable model description standards, the adoption of common simulation languages or the use of standardized middleware. Each of these approaches finds applications within the broad range of current modeling activity. However more effort is required in many areas to enable new scientific questions to be addressed. Here we present the conclusions of the “Neuro-IT Interoperability of Simulators” workshop, held at the 11th computational neuroscience meeting in Edinburgh (July 19-20 2006; http://www.cnsorg.org). We assess the current state of interoperability of neural simulation software and explore the future directions that will enable the field to advance. PMID:17873374

Automation life-cycle cost model

NASA Technical Reports Server (NTRS)

Gathmann, Thomas P.; Reeves, Arlinda J.; Cline, Rick; Henrion, Max; Ruokangas, Corinne

1992-01-01

The problem domain being addressed by this contractual effort can be summarized by the following list: Automation and Robotics (A&R) technologies appear to be viable alternatives to current, manual operations; Life-cycle cost models are typically judged with suspicion due to implicit assumptions and little associated documentation; and Uncertainty is a reality for increasingly complex problems and few models explicitly account for its affect on the solution space. The objectives for this effort range from the near-term (1-2 years) to far-term (3-5 years). In the near-term, the envisioned capabilities of the modeling tool are annotated. In addition, a framework is defined and developed in the Decision Modelling System (DEMOS) environment. Our approach is summarized as follows: Assess desirable capabilities (structure into near- and far-term); Identify useful existing models/data; Identify parameters for utility analysis; Define tool framework; Encode scenario thread for model validation; and Provide transition path for tool development. This report contains all relevant, technical progress made on this contractual effort.

A Synthetic Vision Preliminary Integrated Safety Analysis

NASA Technical Reports Server (NTRS)

Hemm, Robert; Houser, Scott

2001-01-01

This report documents efforts to analyze a sample of aviation safety programs, using the LMI-developed integrated safety analysis tool to determine the change in system risk resulting from Aviation Safety Program (AvSP) technology implementation. Specifically, we have worked to modify existing system safety tools to address the safety impact of synthetic vision (SV) technology. Safety metrics include reliability, availability, and resultant hazard. This analysis of SV technology is intended to be part of a larger effort to develop a model that is capable of "providing further support to the product design and development team as additional information becomes available". The reliability analysis portion of the effort is complete and is fully documented in this report. The simulation analysis is still underway; it will be documented in a subsequent report. The specific goal of this effort is to apply the integrated safety analysis to SV technology. This report also contains a brief discussion of data necessary to expand the human performance capability of the model, as well as a discussion of human behavior and its implications for system risk assessment in this modeling environment.

Study of mathematical modeling of communication systems transponders and receivers

NASA Technical Reports Server (NTRS)

Walsh, J. R.

1972-01-01

The modeling of communication receivers is described at both the circuit detail level and at the block level. The largest effort was devoted to developing new models at the block modeling level. The available effort did not permit full development of all of the block modeling concepts envisioned, but idealized blocks were developed for signal sources, a variety of filters, limiters, amplifiers, mixers, and demodulators. These blocks were organized into an operational computer simulation of communications receiver circuits identified as the frequency and time circuit analysis technique (FATCAT). The simulation operates in both the time and frequency domains, and permits output plots or listings of either frequency spectra or time waveforms from any model block. Transfer between domains is handled with a fast Fourier transform algorithm.

NATIONAL-SCALE ASSESSMENT OF AIR TOXICS RISKS ...

EPA Pesticide Factsheets

The national-scale assessment of air toxics risks is a modeling assessment which combines emission inventory development, atmospheric fate and transport modeling, exposure modeling, and risk assessment to characterize the risk associated with inhaling air toxics from outdoor sources. This national-scale effort will be initiated for the base year 1996 and repeated every three years thereafter to track trends and inform program development. Provide broad-scale understanding of inhalation risks for a subset of atmospherically-emitted air toxics to inform further data-gathering efforts and priority-setting for the EPA's Air Toxics Programs.

Cryogenic Fluid Storage Technology Development: Recent and Planned Efforts at NASA

NASA Technical Reports Server (NTRS)

Moran, Matthew E.

2009-01-01

Recent technology development work conducted at NASA in the area of Cryogenic Fluid Management (CFM) storage is highlighted, including summary results, key impacts, and ongoing efforts. Thermodynamic vent system (TVS) ground test results are shown for hydrogen, methane, and oxygen. Joule-Thomson (J-T) device tests related to clogging in hydrogen are summarized, along with the absence of clogging in oxygen and methane tests. Confirmation of analytical relations and bonding techniques for broad area cooling (BAC) concepts based on tube-to-tank tests are presented. Results of two-phase lumped-parameter computational fluid dynamic (CFD) models are highlighted, including validation of the model with hydrogen self pressurization test data. These models were used to simulate Altair representative methane and oxygen tanks subjected to 210 days of lunar surface storage. Engineering analysis tools being developed to support system level trades and vehicle propulsion system designs are also cited. Finally, prioritized technology development risks identified for Constellation cryogenic propulsion systems are presented, and future efforts to address those risks are discussed.

Understanding climate-induced migration through computational modeling: A critical overview with guidance for future efforts

DOE PAGES

Till, Charlotte; Haverkamp, Jamie; White, Devin; ...

2016-11-22

Climate change has the potential to displace large populations in many parts of the developed and developing world. Understanding why, how, and when environmental migrants decide to move is critical to successful strategic planning within organizations tasked with helping the affected groups, and mitigating their systemic impacts. One way to support planning is through the employment of computational modeling techniques. Models can provide a window into possible futures, allowing planners and decision makers to test different scenarios in order to understand what might happen. While modeling is a powerful tool, it presents both opportunities and challenges. This paper builds amore » foundation for the broader community of model consumers and developers by: providing an overview of pertinent climate-induced migration research, describing some different types of models and how to select the most relevant one(s), highlighting three perspectives on obtaining data to use in said model(s), and the consequences associated with each. It concludes with two case studies based on recent research that illustrate what can happen when ambitious modeling efforts are undertaken without sufficient planning, oversight, and interdisciplinary collaboration. Lastly, we hope that the broader community can learn from our experiences and apply this knowledge to their own modeling research efforts.« less

Understanding climate-induced migration through computational modeling: A critical overview with guidance for future efforts

DOE Office of Scientific and Technical Information (OSTI.GOV)

Till, Charlotte; Haverkamp, Jamie; White, Devin

Climate change has the potential to displace large populations in many parts of the developed and developing world. Understanding why, how, and when environmental migrants decide to move is critical to successful strategic planning within organizations tasked with helping the affected groups, and mitigating their systemic impacts. One way to support planning is through the employment of computational modeling techniques. Models can provide a window into possible futures, allowing planners and decision makers to test different scenarios in order to understand what might happen. While modeling is a powerful tool, it presents both opportunities and challenges. This paper builds amore » foundation for the broader community of model consumers and developers by: providing an overview of pertinent climate-induced migration research, describing some different types of models and how to select the most relevant one(s), highlighting three perspectives on obtaining data to use in said model(s), and the consequences associated with each. It concludes with two case studies based on recent research that illustrate what can happen when ambitious modeling efforts are undertaken without sufficient planning, oversight, and interdisciplinary collaboration. Lastly, we hope that the broader community can learn from our experiences and apply this knowledge to their own modeling research efforts.« less

IEA Wind Task 37: Systems Modeling Framework and Ontology for Wind Turbines and Plants

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dykes, Katherine L; Zahle, Frederik; Merz, Karl

This presentation will provide an overview of progress to date in the development of a system modeling framework and ontology for wind turbines and plants as part of the larger IEA Wind Task 37 on wind energy systems engineering. The goals of the effort are to create a set of guidelines for a common conceptual architecture for wind turbines and plants so that practitioners can more easily share descriptions of wind turbines and plants across multiple parties and reduce the effort for translating descriptions between models; integrate different models together and collaborate on model development; and translate models among differentmore » levels of fidelity in the system.« less

Induced Innovation and Social Inequality: Evidence from Infant Medical Care

ERIC Educational Resources Information Center

Cutler, David M.; Meara, Ellen; Richards-Shubik, Seth

2012-01-01

We develop a model of induced innovation that applies to medical research. Our model yields three empirical predictions. First, initial death rates and subsequent research effort should be positively correlated. Second, research effort should be associated with more rapid mortality declines. Third, as a byproduct of targeting the most common…

A Model for Mapping Linkages between Health and Education Agencies To Improve School Health.

ERIC Educational Resources Information Center

St. Leger, Lawrence; Nutbeam, Don

2000-01-01

Reviews the evolution of efforts to develop effective, sustainable school health programs, arguing that efforts were significantly driven by public health priorities and have not adequately accounted for educational perspectives. A model illustrating linkages between different school-based inputs and strategies and long-term health and educational…

Systems Models and Programs for Higher Education. A Catalogue.

ERIC Educational Resources Information Center

Shoemaker, William A.

In recent years there has been considerable effort devoted to the development of systems models and programs that would assist college and university administrators in obtaining and analyzing data about internal operations. Such management data presumably would be helpful in decisionmaking. In this document an effort has been made to provide a…

Climate Scenarios for the NASA / USAID SERVIR Project: Challenges for Multiple Planning Horizons

NASA Technical Reports Server (NTRS)

Robertson, Franklin R.; Roberts, J. B.; Lyon, B.; Funk, C.; Bosilovich, M. G.

2014-01-01

SERVIR, an acronym meaning "to serve" in Spanish, is a joint venture between NASA and the U.S. Agency for International Development (USAID) which provides satellite-based Earth observation data, modeling, and science applications to help developing nations in Central America, East Africa and the Himalayas improve environmental decision making. Anticipating climate variability / climate change impacts has now become an important component of the SERVIR efforts to build capacity in these regions. Uncertainty in hydrometeorological components of climate variations and exposure to extreme events across scales from weather to climate are of particular concern. We report here on work to construct scenarios or outlooks that are being developed as input drivers for decision support systems (DSSs) in a variety of settings. These DSSs are being developed jointly by a broad array NASA Applied Science Team (AST) Investigations and user communities in the three SERVIR Hub Regions, Central America, East Africa and the Himalayas. Issues span hydrologic / water resources modeling, agricultural productivity, and forest carbon reserves. The scenarios needed for these efforts encompass seasonal forecasts, interannual outlooks, and likely decadal / multi-decadal trends. Providing these scenarios across the different AST efforts enables some level of integration in considering regional responses to climate events. We will discuss a number of challenges in developing this continuum of scenarios including the identification and "mining" of predictability, addressing multiple continental regions, issues of downscaling global model integrations to regional / local applications (i.e. hydrologic and crop modeling). We compare / contrast the role of the U.S. National Multi- Model Experiment initiative in seasonal forecasts and the CMIP-5 climate model experiments in supporting these efforts. Examples of these scenarios, their use, and an assessment of their utility as well as limitations will be presented.

A Model of the Temporal Dynamics of Knowledge Brokerage in Sustainable Development

ERIC Educational Resources Information Center

Hukkinen, Janne I.

2016-01-01

I develop a conceptual model of the temporal dynamics of knowledge brokerage for sustainable development. Brokerage refers to efforts to make research and policymaking more accessible to each other. The model enables unbiased and systematic consideration of knowledge brokerage as part of policy evolution. The model is theoretically grounded in…

Modeling the Distribution of Nursing Effort Using Structured Labor and Delivery Documentation

PubMed Central

Hall, Eric S.; Poynton, Mollie R.; Narus, Scott P.; Thornton, Sidney N.

2008-01-01

Our study objectives included the development and evaluation of models for representing the distribution of shared unit-wide nursing care resources among individual Labor and Delivery patients using quantified measurements of nursing care, referred to as Nursing Effort. The models were intended to enable discrimination between the amounts of care delivered to patient subsets defined by attributes such as patient acuity. For each of five proposed models, scores were generated using an analysis set of 686,402 computerized nurse-documented events associated with 1,093 patients at three hospitals during January and February 2006. Significant differences were detected in Nursing Effort scores according to patient acuity, care facility, and in scores generated during shift-change versus non shift-change hours. The development of nursing care quantification strategies proposed in this study supports outcomes analysis by establishing a foundation for measuring the effect of patient-level nursing care on individual patient outcomes. PMID:18495549

Automated support for experience-based software management

NASA Technical Reports Server (NTRS)

Valett, Jon D.

1992-01-01

To effectively manage a software development project, the software manager must have access to key information concerning a project's status. This information includes not only data relating to the project of interest, but also, the experience of past development efforts within the environment. This paper describes the concepts and functionality of a software management tool designed to provide this information. This tool, called the Software Management Environment (SME), enables the software manager to compare an ongoing development effort with previous efforts and with models of the 'typical' project within the environment, to predict future project status, to analyze a project's strengths and weaknesses, and to assess the project's quality. In order to provide these functions the tool utilizes a vast corporate memory that includes a data base of software metrics, a set of models and relationships that describe the software development environment, and a set of rules that capture other knowledge and experience of software managers within the environment. Integrating these major concepts into one software management tool, the SME is a model of the type of management tool needed for all software development organizations.

[Psychosocial factors at work and cardiovascular diseases: contribution of the Effort-Reward Imbalance model].

PubMed

Niedhammer, I; Siegrist, J

1998-11-01

The effect of psychosocial factors at work on health, especially cardiovascular health, has given rise to growing concern in occupational epidemiology over the last few years. Two theoretical models, Karasek's model and the Effort-Reward Imbalance model, have been developed to evaluate psychosocial factors at work within specific conceptual frameworks in an attempt to take into account the serious methodological difficulties inherent in the evaluation of such factors. Karasek's model, the most widely used model, measures three factors: psychological demands, decision latitude and social support at work. Many studies have shown the predictive effects of these factors on cardiovascular diseases independently of well-known cardiovascular risk factors. More recently, the Effort-Reward Imbalance model takes into account the role of individual coping characteristics which was neglected in the Karasek model. The effort-reward imbalance model focuses on the reciprocity of exchange in occupational life where high-cost/low-gain conditions are considered particularly stressful. Three dimensions of rewards are distinguished: money, esteem and gratifications in terms of promotion prospects and job security. Some studies already support that high-effort/low reward-conditions are predictive of cardiovascular diseases.

Systems Analysis Initiated for All-Electric Aircraft Propulsion

NASA Technical Reports Server (NTRS)

Kohout, Lisa L.

2003-01-01

A multidisciplinary effort is underway at the NASA Glenn Research Center to develop concepts for revolutionary, nontraditional fuel cell power and propulsion systems for aircraft applications. There is a growing interest in the use of fuel cells as a power source for electric propulsion as well as an auxiliary power unit to substantially reduce or eliminate environmentally harmful emissions. A systems analysis effort was initiated to assess potential concepts in an effort to identify those configurations with the highest payoff potential. Among the technologies under consideration are advanced proton exchange membrane (PEM) and solid oxide fuel cells, alternative fuels and fuel processing, and fuel storage. Prior to this effort, the majority of fuel cell analysis done at Glenn was done for space applications. Because of this, a new suite of models was developed. These models include the hydrogen-air PEM fuel cell; internal reforming solid oxide fuel cell; balance-of-plant components (compressor, humidifier, separator, and heat exchangers); compressed gas, cryogenic, and liquid fuel storage tanks; and gas turbine/generator models for hybrid system applications. Initial mass, volume, and performance estimates of a variety of PEM systems operating on hydrogen and reformate have been completed for a baseline general aviation aircraft. Solid oxide/turbine hybrid systems are being analyzed. In conjunction with the analysis efforts, a joint effort has been initiated with Glenn s Computer Services Division to integrate fuel cell stack and component models with the visualization environment that supports the GRUVE lab, Glenn s virtual reality facility. The objective of this work is to provide an environment to assist engineers in the integration of fuel cell propulsion systems into aircraft and provide a better understanding of the interaction between system components and the resulting effect on the overall design and performance of the aircraft. Initially, three-dimensional computer-aided design (CAD) models of representative PEM fuel cell stack and components were developed and integrated into the virtual reality environment along with an Excel-based model used to calculate fuel cell electrical performance on the basis of cell dimensions (see the figure). CAD models of a representative general aviation aircraft were also developed and added to the environment. With the use of special headgear, users will be able to virtually manipulate the fuel cell s physical characteristics and its placement within the aircraft while receiving information on the resultant fuel cell output power and performance. As the systems analysis effort progresses, we will add more component models to the GRUVE environment to help us more fully understand the effect of various system configurations on the aircraft.

Rapid prototyping and AI programming environments applied to payload modeling

NASA Technical Reports Server (NTRS)

Carnahan, Richard S., Jr.; Mendler, Andrew P.

1987-01-01

This effort focused on using artificial intelligence (AI) programming environments and rapid prototyping to aid in both space flight manned and unmanned payload simulation and training. Significant problems addressed are the large amount of development time required to design and implement just one of these payload simulations and the relative inflexibility of the resulting model to accepting future modification. Results of this effort have suggested that both rapid prototyping and AI programming environments can significantly reduce development time and cost when applied to the domain of payload modeling for crew training. The techniques employed are applicable to a variety of domains where models or simulations are required.

Aerosol-Radiation-Cloud Interactions in the South-East Atlantic: Model-Relevant Observations and the Beneficiary Modeling Efforts in the Realm of the EVS-2 Project ORACLES

NASA Technical Reports Server (NTRS)

Redemann, Jens

2018-01-01

Globally, aerosols remain a major contributor to uncertainties in assessments of anthropogenically-induced changes to the Earth climate system, despite concerted efforts using satellite and suborbital observations and increasingly sophisticated models. The quantification of direct and indirect aerosol radiative effects, as well as cloud adjustments thereto, even at regional scales, continues to elude our capabilities. Some of our limitations are due to insufficient sampling and accuracy of the relevant observables, under an appropriate range of conditions to provide useful constraints for modeling efforts at various climate scales. In this talk, I will describe (1) the efforts of our group at NASA Ames to develop new airborne instrumentation to address some of the data insufficiencies mentioned above; (2) the efforts by the EVS-2 ORACLES project to address aerosol-cloud-climate interactions in the SE Atlantic and (3) time permitting, recent results from a synergistic use of A-Train aerosol data to test climate model simulations of present-day direct radiative effects in some of the AEROCOM phase II global climate models.

Developing mesoscopic models for the before and after study of the inter-county connector : phase-one.

DOT National Transportation Integrated Search

2013-03-01

This study developed a mesoscopic model for the before and after study of MD 200, the Inter-County Connector. It is in line with : recent efforts by the Maryland State Highway Administration (SHA) in developing effective modeling tools for traffic an...

Development of Methods to Predict the Effects of Test Media in Ground-Based Propulsion Testing

NASA Technical Reports Server (NTRS)

Drummond, J. Philip; Danehy, Paul M.; Gaffney, Richard L., Jr.; Parker, Peter A.; Tedder, Sarah A.; Chelliah, Harsha K.; Cutler, Andrew D.; Bivolaru, Daniel; Givi, Peyman; Hassan, Hassan A.

2009-01-01

This report discusses work that began in mid-2004 sponsored by the Office of the Secretary of Defense (OSD) Test & Evaluation/Science & Technology (T&E/S&T) Program. The work was undertaken to improve the state of the art of CFD capabilities for predicting the effects of the test media on the flameholding characteristics in scramjet engines. The program had several components including the development of advanced algorithms and models for simulating engine flowpaths as well as a fundamental experimental and diagnostic development effort to support the formulation and validation of the mathematical models. This report provides details of the completed work, involving the development of phenomenological models for Reynolds averaged Navier-Stokes codes, large-eddy simulation techniques and reduced-kinetics models. Experiments that provided data for the modeling efforts are also described, along with with the associated nonintrusive diagnostics used to collect the data.

New Instruments for Studying the Impacts of Science Teacher Professional Development

ERIC Educational Resources Information Center

Trygstad, Peggy J.; Banilower, Eric R.; Smith, P. Sean; Nelson, Courtney L.

2014-01-01

The logic model that implicitly drives most professional development (PD) efforts asserts that PD leads to changes in teacher knowledge and beliefs, which leads to improved classroom practice, and ultimately, better student outcomes. However, efforts to study the impacts of PD programs are often hampered by the scarcity of high-quality…

Group-effort Applied Research: Expanding Opportunities for Undergraduate Research through Original, Class-Based Research Projects

ERIC Educational Resources Information Center

Moore, Sean D.; Teter, Ken

2014-01-01

Undergraduate research clearly enriches the educational development of participating students, but these experiences are limited by the inherent inefficiency of the standard one student-one mentor model for undergraduate research. Group-effort applied research (GEAR) was developed as a strategy to provide substantial numbers of undergraduates with…

Scenario Development Process at the Vertical Motion Simulator

NASA Technical Reports Server (NTRS)

Reardon, Scott E.; Beard, Steven D.; Lewis, Emily

2017-01-01

There has been a significant effort within the simulation community to standardize many aspects of flight simulation. More recently, an effort has begun to develop a formal scenario definition language for aviation. A working group within the AIAA Modeling and Simulation Technical Committee has been created to develop a standard aviation scenario definition language, though much of the initial effort has been tailored to training simulators. Research and development (R&D) simulators, like the Vertical Motion Simulator (VMS), and training simulators have different missions and thus have different scenario requirements. The purpose of this paper is to highlight some of the unique tasks and scenario elements used at the VMS so they may be captured by scenario standardization efforts. The VMS most often performs handling qualities studies and transfer of training studies. Three representative handling qualities simulation studies and two transfer of training simulation studies are described in this paper. Unique scenario elements discussed in this paper included special out-the-window (OTW) targets and environmental conditions, motion system parameters, active inceptor parameters, and configurable vehicle math model parameters.

Finite element modeling of concrete structures strengthened with FRP laminates

DOT National Transportation Integrated Search

2001-05-01

Linear and non-linear method models were developed for a reinforced concrete bridge that had been strengthened with fiber reinforced polymer (FRP) composites. ANSYS and SAP2000 modeling software were used; however, most of the development effort used...

ATMOSPHERIC MODEL DEVELOPMENT

EPA Science Inventory

This task provides credible state of the art air quality models and guidance for use in implementation of National Ambient Air Quality Standards for ozone and PM. This research effort is to develop and improve air quality models, such as the Community Multiscale Air Quality (CMA...

Nonlinear Constitutive Relations for High Temperature Application, 1984

NASA Technical Reports Server (NTRS)

1985-01-01

Nonlinear constitutive relations for high temperature applications were discussed. The state of the art in nonlinear constitutive modeling of high temperature materials was reviewed and the need for future research and development efforts in this area was identified. Considerable research efforts are urgently needed in the development of nonlinear constitutive relations for high temperature applications prompted by recent advances in high temperature materials technology and new demands on material and component performance. Topics discussed include: constitutive modeling, numerical methods, material testing, and structural applications.

Impact of remote sensing upon the planning, management, and development of water resources

NASA Technical Reports Server (NTRS)

Loats, H. L.; Fowler, T. R.; Frech, S. L.

1974-01-01

A survey of the principal water resource users was conducted to determine the impact of new remote data streams on hydrologic computer models. The analysis of the responses and direct contact demonstrated that: (1) the majority of water resource effort of the type suitable to remote sensing inputs is conducted by major federal water resources agencies or through federally stimulated research, (2) the federal government develops most of the hydrologic models used in this effort; and (3) federal computer power is extensive. The computers, computer power, and hydrologic models in current use were determined.

Examining hydrogen transitions.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plotkin, S. E.; Energy Systems

2007-03-01

This report describes the results of an effort to identify key analytic issues associated with modeling a transition to hydrogen as a fuel for light duty vehicles, and using insights gained from this effort to suggest ways to improve ongoing modeling efforts. The study reported on here examined multiple hydrogen scenarios reported in the literature, identified modeling issues associated with those scenario analyses, and examined three DOE-sponsored hydrogen transition models in the context of those modeling issues. The three hydrogen transition models are HyTrans (contractor: Oak Ridge National Laboratory), MARKAL/DOE* (Brookhaven National Laboratory), and NEMS-H2 (OnLocation, Inc). The goals ofmore » these models are (1) to help DOE improve its R&D effort by identifying key technology and other roadblocks to a transition and testing its technical program goals to determine whether they are likely to lead to the market success of hydrogen technologies, (2) to evaluate alternative policies to promote a transition, and (3) to estimate the costs and benefits of alternative pathways to hydrogen development.« less

The politics of participation in watershed modeling.

PubMed

Korfmacher, K S

2001-02-01

While researchers and decision-makers increasingly recognize the importance of public participation in environmental decision-making, there is less agreement about how to involve the public. One of the most controversial issues is how to involve citizens in producing scientific information. Although this question is relevant to many areas of environmental policy, it has come to the fore in watershed management. Increasingly, the public is becoming involved in the sophisticated computer modeling efforts that have been developed to inform watershed management decisions. These models typically have been treated as technical inputs to the policy process. However, model-building itself involves numerous assumptions, judgments, and decisions that are relevant to the public. This paper examines the politics of public involvement in watershed modeling efforts and proposes five guidelines for good practice for such efforts. Using these guidelines, I analyze four cases in which different approaches to public involvement in the modeling process have been attempted and make recommendations for future efforts to involve communities in watershed modeling. Copyright 2001 Springer-Verlag

Design, development, and evaluation of a second generation interactive Simulator for Engineering Ethics Education (SEEE2).

PubMed

Alfred, Michael; Chung, Christopher A

2012-12-01

This paper describes a second generation Simulator for Engineering Ethics Education. Details describing the first generation activities of this overall effort are published in Chung and Alfred (Sci Eng Ethics 15:189-199, 2009). The second generation research effort represents a major development in the interactive simulator educational approach. As with the first generation effort, the simulator places students in first person perspective scenarios involving different types of ethical situations. Students must still gather data, assess the situation, and make decisions. The approach still requires students to develop their own ability to identify and respond to ethical engineering situations. However, were as, the generation one effort involved the use of a dogmatic model based on National Society of Professional Engineers' Code of Ethics, the new generation two model is based on a mathematical model of the actual experiences of engineers involved in ethical situations. This approach also allows the use of feedback in the form of decision effectiveness and professional career impact. Statistical comparisons indicate a 59 percent increase in overall knowledge and a 19 percent improvement in teaching effectiveness over an Internet Engineering Ethics resource based approach.

Evaluation of an ARPS-based canopy flow modeling system for use in future operational smoke prediction efforts

Treesearch

M. T. Kiefer; S. Zhong; W. E. Heilman; J. J. Charney; X. Bian

2013-01-01

Efforts to develop a canopy flow modeling system based on the Advanced Regional Prediction System (ARPS) model are discussed. The standard version of ARPS is modified to account for the effect of drag forces on mean and turbulent flow through a vegetation canopy, via production and sink terms in the momentum and subgrid-scale turbulent kinetic energy (TKE) equations....

Dealing with Diversity in Computational Cancer Modeling

PubMed Central

Johnson, David; McKeever, Steve; Stamatakos, Georgios; Dionysiou, Dimitra; Graf, Norbert; Sakkalis, Vangelis; Marias, Konstantinos; Wang, Zhihui; Deisboeck, Thomas S.

2013-01-01

This paper discusses the need for interconnecting computational cancer models from different sources and scales within clinically relevant scenarios to increase the accuracy of the models and speed up their clinical adaptation, validation, and eventual translation. We briefly review current interoperability efforts drawing upon our experiences with the development of in silico models for predictive oncology within a number of European Commission Virtual Physiological Human initiative projects on cancer. A clinically relevant scenario, addressing brain tumor modeling that illustrates the need for coupling models from different sources and levels of complexity, is described. General approaches to enabling interoperability using XML-based markup languages for biological modeling are reviewed, concluding with a discussion on efforts towards developing cancer-specific XML markup to couple multiple component models for predictive in silico oncology. PMID:23700360

Examination of Bond Properties through Infrared Spectroscopy and Molecular Modeling in the General Chemistry Laboratory

ERIC Educational Resources Information Center

Csizmar, Clifford M.; Force, Dee Ann; Warner, Don L.

2012-01-01

A concerted effort has been made to increase the opportunities for undergraduate students to address scientific problems employing the processes used by practicing chemists. As part of this effort, an infrared (IR) spectroscopy and molecular modeling experiment was developed for the first-year general chemistry laboratory course. In the…

Thermodynamic analysis and subscale modeling of space-based orbit transfer vehicle cryogenic propellant resupply

NASA Technical Reports Server (NTRS)

Defelice, David M.; Aydelott, John C.

1987-01-01

The resupply of the cryogenic propellants is an enabling technology for spacebased orbit transfer vehicles. As part of the NASA Lewis ongoing efforts in microgravity fluid management, thermodynamic analysis and subscale modeling techniques were developed to support an on-orbit test bed for cryogenic fluid management technologies. Analytical results have shown that subscale experimental modeling of liquid resupply can be used to validate analytical models when the appropriate target temperature is selected to relate the model to its prototype system. Further analyses were used to develop a thermodynamic model of the tank chilldown process which is required prior to the no-vent fill operation. These efforts were incorporated into two FORTRAN programs which were used to present preliminary analyticl results.

The Impact of the Developmental Training Model on Staff Development in Air Force Child Development Programs

ERIC Educational Resources Information Center

Bird, Candace Maria Edmonds

2010-01-01

In an effort to standardize training delivery and to individualize staff development based on observation and reflective practice, the Air Force implemented the Developmental Training Model (DTM) in its Child Development Programs. The goal of the Developmental Training Model is to enhance high quality programs through improvements in the training…

Metadata mapping and reuse in caBIG.

PubMed

Kunz, Isaac; Lin, Ming-Chin; Frey, Lewis

2009-02-05

This paper proposes that interoperability across biomedical databases can be improved by utilizing a repository of Common Data Elements (CDEs), UML model class-attributes and simple lexical algorithms to facilitate the building domain models. This is examined in the context of an existing system, the National Cancer Institute (NCI)'s cancer Biomedical Informatics Grid (caBIG). The goal is to demonstrate the deployment of open source tools that can be used to effectively map models and enable the reuse of existing information objects and CDEs in the development of new models for translational research applications. This effort is intended to help developers reuse appropriate CDEs to enable interoperability of their systems when developing within the caBIG framework or other frameworks that use metadata repositories. The Dice (di-grams) and Dynamic algorithms are compared and both algorithms have similar performance matching UML model class-attributes to CDE class object-property pairs. With algorithms used, the baselines for automatically finding the matches are reasonable for the data models examined. It suggests that automatic mapping of UML models and CDEs is feasible within the caBIG framework and potentially any framework that uses a metadata repository. This work opens up the possibility of using mapping algorithms to reduce cost and time required to map local data models to a reference data model such as those used within caBIG. This effort contributes to facilitating the development of interoperable systems within caBIG as well as other metadata frameworks. Such efforts are critical to address the need to develop systems to handle enormous amounts of diverse data that can be leveraged from new biomedical methodologies.

Development of assessment tools to measure organizational support for employee health.

PubMed

Golaszewski, Thomas; Barr, Donald; Pronk, Nico

2003-01-01

To develop systems that measure and effect organizational support for employee health. Multiple studies and developmental projects were reviewed that show the process of instrument development, metric quality testing, utilization within intervention studies, and prediction modeling efforts. Demographic patterns indicate high support levels and relationships of subsections to various employee health risks. Successes with the initial version have given rise to 2 additional evaluation tools. The availability of these systems illustrates how ecological models can be practically applied. Such efforts contribute to the paradigm shift in worksite health promotion that focuses on the organization as the target of intervention.

[Psychometric properties of the French version of the Effort-Reward Imbalance model].

PubMed

Niedhammer, I; Siegrist, J; Landre, M F; Goldberg, M; Leclerc, A

2000-10-01

Two main models are currently used to evaluate psychosocial factors at work: the Job Strain model developed by Karasek and the Effort-Reward Imbalance model. A French version of the first model has been validated for the dimensions of psychological demands and decision latitude. As regards the second one evaluating three dimensions (extrinsic effort, reward, and intrinsic effort), there are several versions in different languages, but until recently there was no validated French version. The objective of this study was to explore the psychometric properties of the French version of the Effort-Reward Imbalance model in terms of internal consistency, factorial validity, and discriminant validity. The present study was based on the GAZEL cohort and included the 10 174 subjects who were working at the French national electric and gas company (EDF-GDF) and answered the questionnaire in 1998. A French version of Effort-Reward Imbalance was included in this questionnaire. This version was obtained by a standard forward/backward translation procedure. Internal consistency was satisfactory for the three scales of extrinsic effort, reward, and intrinsic effort: Cronbach's Alpha coefficients higher than 0.7 were observed. A one-factor solution was retained for the factor analysis of the scale of extrinsic effort. A three-factor solution was retained for the factor analysis of reward, and these dimensions were interpreted as the factor analysis of intrinsic effort did not support the expected four-dimension structure. The analysis of discriminant validity displayed significant associations between measures of Effort-Reward Imbalance and the variables of sex, age, education level, and occupational grade. This study is the first one supporting satisfactory psychometric properties of the French version of the Effort-Reward Imbalance model. However, the factorial validity of intrinsic effort could be questioned. Furthermore, as most previous studies were based on male samples working in specific occupations, the present one is also one of the first to show strong associations between measures of this model and social class variables in a population of men and women employed in various occupations.

Development of 3D and 4D Bridge Models and Plans

DOT National Transportation Integrated Search

2018-05-28

Since 2012, MDOT has been leading national efforts to modernize design development with 3D modeling. Early focus on roadway projects yielded streamlined plan production and digital data for construction. As MDOT pivots to 3D model-centric design, nat...

Development of Water Quality Modeling in the United States

EPA Science Inventory

This presentation describes historical trends in water quality model development in the United States, reviews current efforts, and projects promising future directions. Water quality modeling has a relatively long history in the United States. While its origins lie in the work...

THE DEVELOPMENT OF EMPIRICAL LOAD-ECOLOGICAL RESPONSE MODELS TO DETERMINE NITROGEN LIMITS IN THE COASTAL ENVIRONMENT

EPA Science Inventory

The U.S. EPA Atlantic Ecology Division (AED) has initiated a multi-year research program to develop empirical nitrogen load-response models. Our research on embayments in southern New England is part of a multi-regional effort to develop cause-effect models for the Gulf of Mexic...

Model for predicting the impact upon economic development resulting from highway improvement projects.

DOT National Transportation Integrated Search

2011-10-01

The Nebraska Department of Roads (NDOR) has an interest in integrating state economic development impact as another factor in prioritizing transportation investments. Such efforts require the development of a comprehensive model that can be used to e...

Hierarchical Architectural Considerations in Econometric Modeling of Manufacturing Systems

DTIC Science & Technology

1981-06-01

behavioral factors must also be considered. A proposed economic model, to be aligned with ICAM program intentions, should be generic and have the... relevant to the effort and to identify contractors, if any, involved in economic model development. Due to the nature of involvement of other con...tractors with the ICAM program office, information which was thought relevant to the initiation of the current effort was in a lag-time and was

MODEL DEVELOPMENT FOR FY08 CMAQ RELEASE

EPA Science Inventory

This task provides credible state of the art air quality models and guidance for use in implementation of National Ambient Air Quality Standards for ozone and PM. This research effort is to develop and improve air quality models, such as the Community Multiscale Air Quality (CMA...

Automatic Dynamic Aircraft Modeler (ADAM) for the Computer Program NASTRAN

NASA Technical Reports Server (NTRS)

Griffis, H.

1985-01-01

Large general purpose finite element programs require users to develop large quantities of input data. General purpose pre-processors are used to decrease the effort required to develop structural models. Further reduction of effort can be achieved by specific application pre-processors. Automatic Dynamic Aircraft Modeler (ADAM) is one such application specific pre-processor. General purpose pre-processors use points, lines and surfaces to describe geometric shapes. Specifying that ADAM is used only for aircraft structures allows generic structural sections, wing boxes and bodies, to be pre-defined. Hence with only gross dimensions, thicknesses, material properties and pre-defined boundary conditions a complete model of an aircraft can be created.

NASA Software Cost Estimation Model: An Analogy Based Estimation Model

NASA Technical Reports Server (NTRS)

Hihn, Jairus; Juster, Leora; Menzies, Tim; Mathew, George; Johnson, James

2015-01-01

The cost estimation of software development activities is increasingly critical for large scale integrated projects such as those at DOD and NASA especially as the software systems become larger and more complex. As an example MSL (Mars Scientific Laboratory) developed at the Jet Propulsion Laboratory launched with over 2 million lines of code making it the largest robotic spacecraft ever flown (Based on the size of the software). Software development activities are also notorious for their cost growth, with NASA flight software averaging over 50% cost growth. All across the agency, estimators and analysts are increasingly being tasked to develop reliable cost estimates in support of program planning and execution. While there has been extensive work on improving parametric methods there is very little focus on the use of models based on analogy and clustering algorithms. In this paper we summarize our findings on effort/cost model estimation and model development based on ten years of software effort estimation research using data mining and machine learning methods to develop estimation models based on analogy and clustering. The NASA Software Cost Model performance is evaluated by comparing it to COCOMO II, linear regression, and K-­ nearest neighbor prediction model performance on the same data set.

Validation of Model Forecasts of the Ambient Solar Wind

NASA Technical Reports Server (NTRS)

Macneice, P. J.; Hesse, M.; Kuznetsova, M. M.; Rastaetter, L.; Taktakishvili, A.

2009-01-01

Independent and automated validation is a vital step in the progression of models from the research community into operational forecasting use. In this paper we describe a program in development at the CCMC to provide just such a comprehensive validation for models of the ambient solar wind in the inner heliosphere. We have built upon previous efforts published in the community, sharpened their definitions, and completed a baseline study. We also provide first results from this program of the comparative performance of the MHD models available at the CCMC against that of the Wang-Sheeley-Arge (WSA) model. An important goal of this effort is to provide a consistent validation to all available models. Clearly exposing the relative strengths and weaknesses of the different models will enable forecasters to craft more reliable ensemble forecasting strategies. Models of the ambient solar wind are developing rapidly as a result of improvements in data supply, numerical techniques, and computing resources. It is anticipated that in the next five to ten years, the MHD based models will supplant semi-empirical potential based models such as the WSA model, as the best available forecast models. We anticipate that this validation effort will track this evolution and so assist policy makers in gauging the value of past and future investment in modeling support.

Wind Energy Workforce Development & Jobs

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tegen, Suzanne

The United States needs a skilled and qualified wind energy workforce to produce domestic clean power. To assist with wind energy workforce development, the U.S. Department of Energy (DOE) and National Renewable Energy Laboratory are engaged with several efforts.This presentation by Suzanne Tegen describes these efforts, including a wind industry survey, DOE's Wind Career Map, the DOE Wind Vision report, and an in-depth discussion of the Jobs & Economic Development Impacts Model.

Countering Extremism: An Understanding of the Problem, the Process and Some Solutions

DTIC Science & Technology

2015-06-01

Radicalization into Terrorism.” 20 extremist movement “could not be developed , evolved or sustained over time and place” without the support of...efforts to research, develop , and implement a variety of methods and models to prevent and counter violent extremism (CVE). Despite these efforts...but how to better understand the radicalization process in order to develop effective strategies to prevent radicalization from occurring. Faced

The Application of Modeling and Simulation in Capacity Management within the ITIL Framework

NASA Technical Reports Server (NTRS)

Rahmani, Sonya; vonderHoff, Otto

2010-01-01

Tightly integrating modeling and simulation techniques into Information Technology Infrastructure Library (ITIL) practices can be one of the driving factors behind a successful and cost-effective capacity management effort for any Information Technology (IT) system. ITIL is a best practices framework for managing IT infrastructure, development and operations. Translating ITIL theory into operational reality can be a challenge. This paper aims to highlight how to best integrate modeling and simulation into an ITIL implementation. For cases where the project team initially has difficulty gaining consensus on investing in modeling and simulation resources, a clear definition for M&S implementation into the ITIL framework, specifically its role in supporting Capacity Management, is critical to gaining the support required to garner these resources. This implementation should also help to clearly define M&S support to the overall system mission. This paper will describe the development of an integrated modeling approach and how best to tie M&S to definitive goals for evaluating system capacity and performance requirements. Specifically the paper will discuss best practices for implementing modeling and simulation into ITIL. These practices hinge on implementing integrated M&S methods that 1) encompass at least two or more predictive modeling techniques, 2) complement each one's respective strengths and weaknesses to support the validation of predicted results, and 3) are tied to the system's performance and workload monitoring efforts. How to structure two forms of modeling: statistical and simUlation in the development of "As Is" and "To Be" efforts will be used to exemplify the integrated M&S methods. The paper will show how these methods can better support the project's overall capacity management efforts.

Groundwater Pathway Model for the Los Alamos National Laboratory Technical Area 54, Area G, Revision 1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stauffer, Philip H.; Chu, Shaoping; Miller, Terry A.

This report consists of four major sections, including this introductory section. Section 2 provides an overview of previous investigations related to the development of the current sitescale model. The methods and data used to develop the 3-D groundwater model and the techniques used to distill that model into a form suitable for use in the GoldSim models are discussed in Section 3. Section 4 presents the results of the model development effort and discusses some of the uncertainties involved. Eight attachments that provide details about the components and data used in this groundwater pathway model are also included with thismore » report. The groundwater modeling effort reported here is a revision of the work that was conducted in 2005 (Stauffer et al., 2005a) in support of the 2008 Area G performance assessment and composite analysis (LANL, 2008). The revision effort was undertaken primarily to incorporate new geologic information that has been collected since 2003 at, and in the vicinity of, Area G. The new data were used to create a more accurate geologic framework model (GFM) that forms the basis of the numerical modeling of the site’s long-term performance. The groundwater modeling uses mean hydrologic properties of the geologic strata underlying Area G; this revision includes an evaluation of the impacts that natural variability in these properties may have on the model projections.« less

Aerothermal Ground Testing of Flexible Thermal Protection Systems for Hypersonic Inflatable Aerodynamic Decelerators

NASA Technical Reports Server (NTRS)

Bruce, Walter E., III; Mesick, Nathaniel J.; Ferlemann, Paul G.; Siemers, Paul M., III; DelCorso, Joseph A.; Hughes, Stephen J.; Tobin, Steven A.; Kardell, Matthew P.

2012-01-01

Flexible TPS development involves ground testing and analysis necessary to characterize performance of the FTPS candidates prior to flight testing. This paper provides an overview of the analysis and ground testing efforts performed over the last year at the NASA Langley Research Center and in the Boeing Large-Core Arc Tunnel (LCAT). In the LCAT test series, material layups were subjected to aerothermal loads commensurate with peak re-entry conditions enveloping a range of HIAD mission trajectories. The FTPS layups were tested over a heat flux range from 20 to 50 W/cm with associated surface pressures of 3 to 8 kPa. To support the testing effort a significant redesign of the existing shear (wedge) model holder from previous testing efforts was undertaken to develop a new test technique for supporting and evaluating the FTPS in the high-temperature, arc jet flow. Since the FTPS test samples typically experience a geometry change during testing, computational fluid dynamic (CFD) models of the arc jet flow field and test model were developed to support the testing effort. The CFD results were used to help determine the test conditions experienced by the test samples as the surface geometry changes. This paper includes an overview of the Boeing LCAT facility, the general approach for testing FTPS, CFD analysis methodology and results, model holder design and test methodology, and selected thermal results of several FTPS layups.

Instructional Design Models and Teacher Thinking: Toward a New Conceptual Model for Research and Development.

ERIC Educational Resources Information Center

Moallem, Mahnaz; Earle, Rodney S.

1998-01-01

In an effort to connect current research findings on teacher thinking with components of instructional design models and principles, this article discusses a new contextual model for thinking about teaching and considers the implications of the model for instructional development of research in instructional design and teacher thinking. (Author)

A Vision for Incorporating Environmental Effects into Nitrogen Management Decision Support Tools for U.S. Maize Production

PubMed Central

Banger, Kamaljit; Yuan, Mingwei; Wang, Junming; Nafziger, Emerson D.; Pittelkow, Cameron M.

2017-01-01

Meeting crop nitrogen (N) demand while minimizing N losses to the environment has proven difficult despite significant field research and modeling efforts. To improve N management, several real-time N management tools have been developed with a primary focus on enhancing crop production. However, no coordinated effort exists to simultaneously address sustainability concerns related to N losses at field- and regional-scales. In this perspective, we highlight the opportunity for incorporating environmental effects into N management decision support tools for United States maize production systems by integrating publicly available crop models with grower-entered management information and gridded soil and climate data in a geospatial framework specifically designed to quantify environmental and crop production tradeoffs. To facilitate advances in this area, we assess the capability of existing crop models to provide in-season N recommendations while estimating N leaching and nitrous oxide emissions, discuss several considerations for initial framework development, and highlight important challenges related to improving the accuracy of crop model predictions. Such a framework would benefit the development of regional sustainable intensification strategies by enabling the identification of N loss hotspots which could be used to implement spatially explicit mitigation efforts in relation to current environmental quality goals and real-time weather conditions. Nevertheless, we argue that this long-term vision can only be realized by leveraging a variety of existing research efforts to overcome challenges related to improving model structure, accessing field data to enhance model performance, and addressing the numerous social difficulties in delivery and adoption of such tool by stakeholders. PMID:28804490

A Vision for Incorporating Environmental Effects into Nitrogen Management Decision Support Tools for U.S. Maize Production.

PubMed

Banger, Kamaljit; Yuan, Mingwei; Wang, Junming; Nafziger, Emerson D; Pittelkow, Cameron M

2017-01-01

Meeting crop nitrogen (N) demand while minimizing N losses to the environment has proven difficult despite significant field research and modeling efforts. To improve N management, several real-time N management tools have been developed with a primary focus on enhancing crop production. However, no coordinated effort exists to simultaneously address sustainability concerns related to N losses at field- and regional-scales. In this perspective, we highlight the opportunity for incorporating environmental effects into N management decision support tools for United States maize production systems by integrating publicly available crop models with grower-entered management information and gridded soil and climate data in a geospatial framework specifically designed to quantify environmental and crop production tradeoffs. To facilitate advances in this area, we assess the capability of existing crop models to provide in-season N recommendations while estimating N leaching and nitrous oxide emissions, discuss several considerations for initial framework development, and highlight important challenges related to improving the accuracy of crop model predictions. Such a framework would benefit the development of regional sustainable intensification strategies by enabling the identification of N loss hotspots which could be used to implement spatially explicit mitigation efforts in relation to current environmental quality goals and real-time weather conditions. Nevertheless, we argue that this long-term vision can only be realized by leveraging a variety of existing research efforts to overcome challenges related to improving model structure, accessing field data to enhance model performance, and addressing the numerous social difficulties in delivery and adoption of such tool by stakeholders.

The efficacy of using inventory data to develop optimal diameter increment models

Treesearch

Don C. Bragg

2002-01-01

Most optimal tree diameter growth models have arisen through either the conceptualization of physiological processes or the adaptation of empirical increment models. However, surprisingly little effort has been invested in the melding of these approaches even though it is possible to develop theoretically sound, computationally efficient optimal tree growth models...

Guide to Working with Model Providers.

ERIC Educational Resources Information Center

Walter, Katie; Hassel, Bryan C.

Often a central feature of a school's improvement efforts is the adoption of a Comprehensive School Reform (CSR) model, an externally developed research-based design for school improvement. Adopting a model is only the first step in CSR. Another important step is forging partnerships with developers of CSR models. This guide aims to help schools…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, Richard Edward; Cetiner, Sacit M.; Fugate, David L.

The Small Modular Reactor (SMR) Dynamic System Modeling Tool project is in the third year of development. The project is designed to support collaborative modeling and study of various advanced SMR (non-light water cooled) concepts, including the use of multiple coupled reactors at a single site. The objective of the project is to provide a common simulation environment and baseline modeling resources to facilitate rapid development of dynamic advanced reactor SMR models, ensure consistency among research products within the Instrumentation, Controls, and Human-Machine Interface (ICHMI) technical area, and leverage cross-cutting capabilities while minimizing duplication of effort. The combined simulation environmentmore » and suite of models are identified as the Modular Dynamic SIMulation (MoDSIM) tool. The critical elements of this effort include (1) defining a standardized, common simulation environment that can be applied throughout the program, (2) developing a library of baseline component modules that can be assembled into full plant models using existing geometry and thermal-hydraulic data, (3) defining modeling conventions for interconnecting component models, and (4) establishing user interfaces and support tools to facilitate simulation development (i.e., configuration and parameterization), execution, and results display and capture.« less

Predicting the Effects of Test Media in Ground-Based Propulsion Testing

NASA Technical Reports Server (NTRS)

Drummond, J. Philip; Danehy, Paul M.; Bivolaru, Daniel; Gaffney, Richard L.; Parker, Peter A.; Chelliah, Harsha K.; Cutler, Andrew D.; Givi, Peyman; Hassan, Hassan, A.

2006-01-01

This paper discusses the progress of work which began in mid-2004 sponsored by the Office of the Secretary of Defense (OSD) Test & Evaluation/Science & Technology (T&E/S&T) Program. The purpose of the work is to improve the state of the art of CFD capabilities for predicting the effects of the test media on the flameholding characteristics in scramjet engines. The program has several components including the development of advance algorithms and models for simulating engine flowpaths as well as a fundamental experimental and diagnostic development effort to support the formulation and validation of the mathematical models. The paper will provide details of current work involving the development of phenomenological models for Reynolds averaged Navier-Stokes codes, large-eddy simulation techniques and reduced-kinetics models. Experiments that will provide data for the modeling efforts will also be described, along with with the associated nonintrusive diagnostics used to collect the data.

Development of Novel Repellents Using Structure - Activity Modeling of Compounds in the USDA Archival Database

DTIC Science & Technology

2011-01-01

used in efforts to develop QSAR models. Measurement of Repellent Efficacy Screening for Repellency of Compounds with Unknown Toxicology In screening...CPT) were used to develop Quantitative Structure Activity Relationship ( QSAR ) models to predict repellency. Successful prediction of novel...acylpiperidine QSAR models employed 4 descriptors to describe the relationship between structure and repellent duration. The ANN model of the carboxamides did not

The pharmacology of effort-related choice behavior: Dopamine, depression, and individual differences.

PubMed

Salamone, John D; Correa, Merce; Yohn, Samantha; Lopez Cruz, Laura; San Miguel, Noemi; Alatorre, Luisa

2016-06-01

This review paper is focused upon the involvement of mesolimbic dopamine (DA) and related brain systems in effort-based processes. Interference with DA transmission affects instrumental behavior in a manner that interacts with the response requirements of the task, such that rats with impaired DA transmission show a heightened sensitivity to ratio requirements. Impaired DA transmission also affects effort-related choice behavior, which is assessed by tasks that offer a choice between a preferred reinforcer that has a high work requirement vs. less preferred reinforcer that can be obtained with minimal effort. Rats and mice with impaired DA transmission reallocate instrumental behavior away from food-reinforced tasks with high response costs, and show increased selection of low reinforcement/low cost options. Tests of effort-related choice have been developed into models of pathological symptoms of motivation that are seen in disorders such as depression and schizophrenia. These models are being employed to explore the effects of conditions associated with various psychopathologies, and to assess drugs for their potential utility as treatments for effort-related symptoms. Studies of the pharmacology of effort-based choice may contribute to the development of treatments for symptoms such as psychomotor slowing, fatigue or anergia, which are seen in depression and other disorders. Copyright © 2016 Elsevier B.V. All rights reserved.

Advanced Concept Modeling

NASA Technical Reports Server (NTRS)

Chaput, Armand; Johns, Zachary; Hodges, Todd; Selfridge, Justin; Bevirt, Joeben; Ahuja, Vivek

2015-01-01

Advanced Concepts Modeling software validation, analysis, and design. This was a National Institute of Aerospace contract with a lot of pieces. Efforts ranged from software development and validation for structures and aerodynamics, through flight control development, and aeropropulsive analysis, to UAV piloting services.

Metadata mapping and reuse in caBIG™

PubMed Central

Kunz, Isaac; Lin, Ming-Chin; Frey, Lewis

2009-01-01

Background This paper proposes that interoperability across biomedical databases can be improved by utilizing a repository of Common Data Elements (CDEs), UML model class-attributes and simple lexical algorithms to facilitate the building domain models. This is examined in the context of an existing system, the National Cancer Institute (NCI)'s cancer Biomedical Informatics Grid (caBIG™). The goal is to demonstrate the deployment of open source tools that can be used to effectively map models and enable the reuse of existing information objects and CDEs in the development of new models for translational research applications. This effort is intended to help developers reuse appropriate CDEs to enable interoperability of their systems when developing within the caBIG™ framework or other frameworks that use metadata repositories. Results The Dice (di-grams) and Dynamic algorithms are compared and both algorithms have similar performance matching UML model class-attributes to CDE class object-property pairs. With algorithms used, the baselines for automatically finding the matches are reasonable for the data models examined. It suggests that automatic mapping of UML models and CDEs is feasible within the caBIG™ framework and potentially any framework that uses a metadata repository. Conclusion This work opens up the possibility of using mapping algorithms to reduce cost and time required to map local data models to a reference data model such as those used within caBIG™. This effort contributes to facilitating the development of interoperable systems within caBIG™ as well as other metadata frameworks. Such efforts are critical to address the need to develop systems to handle enormous amounts of diverse data that can be leveraged from new biomedical methodologies. PMID:19208192

Are transnational tobacco companies' market access strategies linked to economic development models? A case study of South Korea.

PubMed

Lee, Sungkyu; Holden, Chris; Lee, Kelley

2013-01-01

Transnational tobacco companies (TTCs) have used varied strategies to access previously closed markets. Using TTCs' efforts to enter the South Korean market from the late 1980s as a case study, this article asks whether there are common patterns in these strategies that relate to the broader economic development models adopted by targeted countries. An analytical review of the existing literature on TTCs' efforts to access emerging markets was conducted to develop hypotheses relating TTCs' strategies to countries' economic development models. A case study of Korea was then undertaken based on analysis of internal tobacco industry documents. Findings were consistent with the hypothesis that TTCs' strategies in Korea were linked to Korea's export-oriented economic development model and its hostile attitude towards foreign investment. A fuller understanding of TTCs' strategies for expansion globally can be derived by locating them within the economic development models of specific countries or regions. Of foremost importance is the need for governments to carefully balance economic and public health policies when considering liberalisation.

Are transnational tobacco companies’ market access strategies linked to economic development models? A case study of South Korea

PubMed Central

Lee, Sungkyu; Holden, Chris; Lee, Kelley

2013-01-01

Transnational tobacco companies (TTCs) have used varied strategies to access previously closed markets. Using TTCs’ efforts to enter the South Korean market from the late 1980s as a case study, this article asks whether there are common patterns in these strategies that relate to the broader economic development models adopted by targeted countries. An analytical review of the existing literature on TTCs’ efforts to access emerging markets was conducted to develop hypotheses relating TTCs’ strategies to countries’ economic development models. A case study of Korea was then undertaken based on analysis of internal tobacco industry documents. Findings were consistent with the hypothesis that TTCs’ strategies in Korea were linked to Korea’s export-oriented economic development model and its hostile attitude toward foreign investment. A fuller understanding of TTCs’ strategies for expansion globally can be derived by locating them within the economic development models of specific countries or regions. Of foremost importance is the need for governments to carefully balance economic and public health policies when considering liberalisation. PMID:23327486

Preliminary development of digital signal processing in microwave radiometers

NASA Technical Reports Server (NTRS)

Stanley, W. D.

1980-01-01

Topics covered involve a number of closely related tasks including: the development of several control loop and dynamic noise model computer programs for simulating microwave radiometer measurements; computer modeling of an existing stepped frequency radiometer in an effort to determine its optimum operational characteristics; investigation of the classical second order analog control loop to determine its ability to reduce the estimation error in a microwave radiometer; investigation of several digital signal processing unit designs; initiation of efforts to develop required hardware and software for implementation of the digital signal processing unit; and investigation of the general characteristics and peculiarities of digital processing noiselike microwave radiometer signals.

Toward Paradoxical Inconsistency in Electrostatics of Metallic Conductors

DTIC Science & Technology

Naturally, when dealing with fundamental problems, the V and V effort should include careful exploration and, if necessary, revision of the fundamentals...Current developments show a clear trend toward more serious efforts in validation and verification (V and V) of physical and engineering models...underlying the physics. With this understanding in mind, we review some fundamentals of the models of crystalline electric conductors and find a

Using the Internet in Middle Schools: A Model for Success. A Collaborative Effort between Los Alamos National Laboratory (LANL) and Los Alamos Middle School (LAMS).

ERIC Educational Resources Information Center

Addessio, Barbara K.; And Others

Los Alamos National Laboratory (LANL) developed a model for school networking using Los Alamos Middle School as a testbed. The project was a collaborative effort between the school and the laboratory. The school secured administrative funding for hardware and software; and LANL provided the network architecture, installation, consulting, and…

Towards a Multi-Stakeholder-Driven Model for Excellence in Higher Education Curriculum Development

ERIC Educational Resources Information Center

Meyer, M. H.; Bushney, M. J.

2008-01-01

A multi-stakeholder-driven model for excellence in higher education curriculum development has been developed. It is based on the assumption that current efforts to curriculum development take place within a framework of limited stakeholder consultation. A total of 18 multiple stakeholders are identified, including learners, alumni, government,…

Data collection for cooperative water resources modeling in the Lower Rio Grande Basin, Fort Quitman to the Gulf of Mexico.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Passell, Howard David; Pallachula, Kiran; Tidwell, Vincent Carroll

2004-10-01

Water resource scarcity around the world is driving the need for the development of simulation models that can assist in water resources management. Transboundary water resources are receiving special attention because of the potential for conflict over scarce shared water resources. The Rio Grande/Rio Bravo along the U.S./Mexican border is an example of a scarce, transboundary water resource over which conflict has already begun. The data collection and modeling effort described in this report aims at developing methods for international collaboration, data collection, data integration and modeling for simulating geographically large and diverse international watersheds, with a special focus onmore » the Rio Grande/Rio Bravo. This report describes the basin, and the data collected. This data collection effort was spatially aggregated across five reaches consisting of Fort Quitman to Presidio, the Rio Conchos, Presidio to Amistad Dam, Amistad Dam to Falcon Dam, and Falcon Dam to the Gulf of Mexico. This report represents a nine-month effort made in FY04, during which time the model was not completed.« less

Systems Engineering Metrics: Organizational Complexity and Product Quality Modeling

NASA Technical Reports Server (NTRS)

Mog, Robert A.

1997-01-01

Innovative organizational complexity and product quality models applicable to performance metrics for NASA-MSFC's Systems Analysis and Integration Laboratory (SAIL) missions and objectives are presented. An intensive research effort focuses on the synergistic combination of stochastic process modeling, nodal and spatial decomposition techniques, organizational and computational complexity, systems science and metrics, chaos, and proprietary statistical tools for accelerated risk assessment. This is followed by the development of a preliminary model, which is uniquely applicable and robust for quantitative purposes. Exercise of the preliminary model using a generic system hierarchy and the AXAF-I architectural hierarchy is provided. The Kendall test for positive dependence provides an initial verification and validation of the model. Finally, the research and development of the innovation is revisited, prior to peer review. This research and development effort results in near-term, measurable SAIL organizational and product quality methodologies, enhanced organizational risk assessment and evolutionary modeling results, and 91 improved statistical quantification of SAIL productivity interests.

Sharing Research Models: Using Software Engineering Practices for Facilitation

PubMed Central

Bryant, Stephanie P.; Solano, Eric; Cantor, Susanna; Cooley, Philip C.; Wagener, Diane K.

2011-01-01

Increasingly, researchers are turning to computational models to understand the interplay of important variables on systems’ behaviors. Although researchers may develop models that meet the needs of their investigation, application limitations—such as nonintuitive user interface features and data input specifications—may limit the sharing of these tools with other research groups. By removing these barriers, other research groups that perform related work can leverage these work products to expedite their own investigations. The use of software engineering practices can enable managed application production and shared research artifacts among multiple research groups by promoting consistent models, reducing redundant effort, encouraging rigorous peer review, and facilitating research collaborations that are supported by a common toolset. This report discusses three established software engineering practices— the iterative software development process, object-oriented methodology, and Unified Modeling Language—and the applicability of these practices to computational model development. Our efforts to modify the MIDAS TranStat application to make it more user-friendly are presented as an example of how computational models that are based on research and developed using software engineering practices can benefit a broader audience of researchers. PMID:21687780

Integrating centralized and decentralized organization structures: an education and development model.

PubMed

Sheriff, R; Banks, A

2001-01-01

Organization change efforts have led to critically examining the structure of education and development departments within hospitals. This qualitative study evaluated an education and development model in an academic health sciences center. The model combines centralization and decentralization. The study results can be used by staff development educators and administrators when organization structure is questioned. This particular model maximizes the benefits and minimizes the limitations of centralized and decentralized structures.

Perceived distributed effort in team ball sports.

PubMed

Beniscelli, Violeta; Tenenbaum, Gershon; Schinke, Robert Joel; Torregrosa, Miquel

2014-01-01

In this study, we explored the multifaceted concept of perceived mental and physical effort in team sport contexts where athletes must invest individual and shared efforts to reach a common goal. Semi-structured interviews were conducted with a convenience sample of 15 Catalan professional coaches (3 women and 12 men, 3 each from the following sports: volleyball, basketball, handball, soccer, and water polo) to gain their views of three perceived effort-related dimensions: physical, psychological, and tactical. From a theoretical thematic analysis, it was found that the perception of effort is closely related to how effort is distributed within the team. Moreover, coaches viewed physical effort in relation to the frequency and intensity of the players' involvement in the game. They identified psychological effort in situations where players pay attention to proper cues, and manage emotions under difficult circumstances. Tactical effort addressed the decision-making process of players and how they fulfilled their roles while taking into account the actions of their teammates and opponents. Based on these findings, a model of perceived distributed effort was developed, which delineates the elements that compose each of the aforementioned dimensions. Implications of perceived distributed effort in team coordination and shared mental models are discussed.

Modeling Combustion in Supersonic Flows

NASA Technical Reports Server (NTRS)

Drummond, J. Philip; Danehy, Paul M.; Bivolaru, Daniel; Gaffney, Richard L.; Tedder, Sarah A.; Cutler, Andrew D.

2007-01-01

This paper discusses the progress of work to model high-speed supersonic reacting flow. The purpose of the work is to improve the state of the art of CFD capabilities for predicting the flow in high-speed propulsion systems, particularly combustor flow-paths. The program has several components including the development of advanced algorithms and models for simulating engine flowpaths as well as a fundamental experimental and diagnostic development effort to support the formulation and validation of the mathematical models. The paper will provide details of current work on experiments that will provide data for the modeling efforts along with with the associated nonintrusive diagnostics used to collect the data from the experimental flowfield. Simulation of a recent experiment to partially validate the accuracy of a combustion code is also described.

Microcirculation and the physiome projects.

PubMed

Bassingthwaighte, James B

2008-11-01

The Physiome projects comprise a loosely knit worldwide effort to define the Physiome through databases and theoretical models, with the goal of better understanding the integrative functions of cells, organs, and organisms. The projects involve developing and archiving models, providing centralized databases, and linking experimental information and models from many laboratories into self-consistent frameworks. Increasingly accurate and complete models that embody quantitative biological hypotheses, adhere to high standards, and are publicly available and reproducible, together with refined and curated data, will enable biological scientists to advance integrative, analytical, and predictive approaches to the study of medicine and physiology. This review discusses the rationale and history of the Physiome projects, the role of theoretical models in the development of the Physiome, and the current status of efforts in this area addressing the microcirculation.

DEVELOPMENT AND APPLICATION OF POPULATION MODELS TO SUPPORT EPA'S ECOLOGICAL RISK ASSESSMENT PROCESSES FOR PESTICIDES

EPA Science Inventory

As part of a broader exploratory effort to develop ecological risk assessment approaches to estimate potential chemical effects on non-target populations, we describe an approach for developing simple population models to estimate the extent to which acute effects on individual...

Supersonic Combustion Research at NASA

NASA Technical Reports Server (NTRS)

Drummond, J. P.; Danehy, Paul M.; Gaffney, Richard L., Jr.; Tedder, Sarah A.; Cutler, Andrew D.; Bivolaru, Daniel

2007-01-01

This paper discusses the progress of work to model high-speed supersonic reacting flow. The purpose of the work is to improve the state of the art of CFD capabilities for predicting the flow in high-speed propulsion systems, particularly combustor flowpaths. The program has several components including the development of advanced algorithms and models for simulating engine flowpaths as well as a fundamental experimental and diagnostic development effort to support the formulation and validation of the mathematical models. The paper will provide details of current work on experiments that will provide data for the modeling efforts along with the associated nonintrusive diagnostics used to collect the data from the experimental flowfield. Simulation of a recent experiment to partially validate the accuracy of a combustion code is also described.

Development and fabrication of the Virginia skid-resistance measurement vehicle (model 2).

DOT National Transportation Integrated Search

1970-01-01

The inefficiency of the Virginia Highway Research Council, Model 1, skid measurement trailer, and the increasing effort expended by the American Society for Testing and Materials toward the development of more stringent specifications for pavement sk...

A Systems Biology Approach to Small Fish Ecotoxicogenomics

EPA Science Inventory

At present, a large and integrated effort in the area of ecotoxicogenomics within USEPA's Office of Research and Development is a research program titled "Linkage of exposure and effects using genomics, proteomics, and metabolomics in small fish models." The effort involves coll...

Final Report of the Mid-Atlantic Marine Wildlife Surveys, Modeling, and Data

DOE Office of Scientific and Technical Information (OSTI.GOV)

Saracino-Brown, Jocelyn; Smith, Courtney; Gilman, Patrick

The Wind Program hosted a two-day workshop on July 24-25, 2012 with scientists and regulators engaged in marine ecological survey, modeling, and database efforts pertaining to the waters of the Mid-Atlantic region. The workshop was planned by Federal agency, academic, and private partners to promote collaboration between ongoing offshore ecological survey efforts, and to promote the collaborative development of complementary predictive models and compatible databases. The meeting primarily focused on efforts to establish and predict marine mammal, seabird, and sea turtle abundance, density, and distributions extending from the shoreline to the edge of the Exclusive Economic Zone between Nantucket Sound,more » Massachusetts and Cape Hatteras, North Carolina.« less

Proton-Exchange-Membrane Fuel Cell Powerplants Developed and Tested for Exploration Missions

NASA Technical Reports Server (NTRS)

Hoberecht, Mark A.; Pham, Nang T.

2005-01-01

Proton-exchange-membrane fuel cell (PEMFC) technology has received major attention for terrestrial applications, such as the automotive and residential markets, for the past 20 years. This attention has significantly advanced the maturity of the technology, resulting in ever more compact, efficient, reliable, and inexpensive PEMFC designs. In comparison to the terrestrial operating environment, the space operating environment is much more demanding. Microgravity to high-gravity loads and the need to use pure oxygen (rather than air) as the fuel cell oxidizer place more stringent demands on PEMFC technology. NASA and its partners from industry are leveraging terrestrial PEMFC advancements by conducting parallel space technology development for future exploration missions. A team from the NASA Glenn Research Center, NASA Johnson Space Center, and NASA Kennedy Space Center recently completed the first phase of a PEMFC powerplant development effort for exploration missions. The industry partners for this phase of the development effort were ElectroChem, Inc., and Teledyne Energy Systems, Inc. Under contract to Glenn, both of these industry partners successfully designed, fabricated, and tested a breadboard PEMFC powerplant in the 1- to 5-kW power range. These powerplants were based on existing company-proprietary fuel cell stack designs, combined with off-the-shelf components, which formed the balance of the powerplant design. Subsequent to the contractor development efforts, both powerplants were independently tested at Johnson to verify operational and performance characteristics, and to determine suitability for further technology development in the second phase of the NASA-led effort. Following the independent NASA testing, Teledyne Energy Systems, Inc., was selected to develop an engineering model PEMFC powerplant. This effort was initiated by the 2nd Generation Reusable Launch Vehicle (RLV) Program Office in 2001; it transitioned to the Next Generation Launch Technologies (NGLT) Program Office in 2003. The effort is now being funded by the Exploration Program Office. We plan to summarize the results from the ongoing engineering model PEMFC powerplant development in a future Research & Technology article.

Proton-Exchange-Membrane Fuel Cell Powerplants Developed and Tested for Exploration Missions

NASA Astrophysics Data System (ADS)

Hoberecht, Mark A.; Pham, Nang T.

2005-06-01

Proton-exchange-membrane fuel cell (PEMFC) technology has received major attention for terrestrial applications, such as the automotive and residential markets, for the past 20 years. This attention has significantly advanced the maturity of the technology, resulting in ever more compact, efficient, reliable, and inexpensive PEMFC designs. In comparison to the terrestrial operating environment, the space operating environment is much more demanding. Microgravity to high-gravity loads and the need to use pure oxygen (rather than air) as the fuel cell oxidizer place more stringent demands on PEMFC technology. NASA and its partners from industry are leveraging terrestrial PEMFC advancements by conducting parallel space technology development for future exploration missions. A team from the NASA Glenn Research Center, NASA Johnson Space Center, and NASA Kennedy Space Center recently completed the first phase of a PEMFC powerplant development effort for exploration missions. The industry partners for this phase of the development effort were ElectroChem, Inc., and Teledyne Energy Systems, Inc. Under contract to Glenn, both of these industry partners successfully designed, fabricated, and tested a breadboard PEMFC powerplant in the 1- to 5-kW power range. These powerplants were based on existing company-proprietary fuel cell stack designs, combined with off-the-shelf components, which formed the balance of the powerplant design. Subsequent to the contractor development efforts, both powerplants were independently tested at Johnson to verify operational and performance characteristics, and to determine suitability for further technology development in the second phase of the NASA-led effort. Following the independent NASA testing, Teledyne Energy Systems, Inc., was selected to develop an engineering model PEMFC powerplant. This effort was initiated by the 2nd Generation Reusable Launch Vehicle (RLV) Program Office in 2001; it transitioned to the Next Generation Launch Technologies (NGLT) Program Office in 2003. The effort is now being funded by the Exploration Program Office. We plan to summarize the results from the ongoing engineering model PEMFC powerplant development in a future Research & Technology article.

Design Science Research toward Designing/Prototyping a Repeatable Model for Testing Location Management (LM) Algorithms for Wireless Networking

ERIC Educational Resources Information Center

Peacock, Christopher

2012-01-01

The purpose of this research effort was to develop a model that provides repeatable Location Management (LM) testing using a network simulation tool, QualNet version 5.1 (2011). The model will provide current and future protocol developers a framework to simulate stable protocol environments for development. This study used the Design Science…

Estimating Software-Development Costs With Greater Accuracy

NASA Technical Reports Server (NTRS)

Baker, Dan; Hihn, Jairus; Lum, Karen

2008-01-01

COCOMOST is a computer program for use in estimating software development costs. The goal in the development of COCOMOST was to increase estimation accuracy in three ways: (1) develop a set of sensitivity software tools that return not only estimates of costs but also the estimation error; (2) using the sensitivity software tools, precisely define the quantities of data needed to adequately tune cost estimation models; and (3) build a repository of software-cost-estimation information that NASA managers can retrieve to improve the estimates of costs of developing software for their project. COCOMOST implements a methodology, called '2cee', in which a unique combination of well-known pre-existing data-mining and software-development- effort-estimation techniques are used to increase the accuracy of estimates. COCOMOST utilizes multiple models to analyze historical data pertaining to software-development projects and performs an exhaustive data-mining search over the space of model parameters to improve the performances of effort-estimation models. Thus, it is possible to both calibrate and generate estimates at the same time. COCOMOST is written in the C language for execution in the UNIX operating system.

The development and application of composite complexity models and a relative complexity metric in a software maintenance environment

NASA Technical Reports Server (NTRS)

Hops, J. M.; Sherif, J. S.

1994-01-01

A great deal of effort is now being devoted to the study, analysis, prediction, and minimization of software maintenance expected cost, long before software is delivered to users or customers. It has been estimated that, on the average, the effort spent on software maintenance is as costly as the effort spent on all other software costs. Software design methods should be the starting point to aid in alleviating the problems of software maintenance complexity and high costs. Two aspects of maintenance deserve attention: (1) protocols for locating and rectifying defects, and for ensuring that noe new defects are introduced in the development phase of the software process; and (2) protocols for modification, enhancement, and upgrading. This article focuses primarily on the second aspect, the development of protocols to help increase the quality and reduce the costs associated with modifications, enhancements, and upgrades of existing software. This study developed parsimonious models and a relative complexity metric for complexity measurement of software that were used to rank the modules in the system relative to one another. Some success was achieved in using the models and the relative metric to identify maintenance-prone modules.

History of research on modelling gypsy moth population ecology

Treesearch

J. J. Colbert

1991-01-01

History of research to develop models of gypsy moth population dynamics and some related studies are described. Empirical regression-based models are reviewed, and then the more comprehensive process models are discussed. Current model- related research efforts are introduced.

Accommodating complexity and human behaviors in decision analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Backus, George A.; Siirola, John Daniel; Schoenwald, David Alan

2007-11-01

This is the final report for a LDRD effort to address human behavior in decision support systems. One sister LDRD effort reports the extension of this work to include actual human choices and additional simulation analyses. Another provides the background for this effort and the programmatic directions for future work. This specific effort considered the feasibility of five aspects of model development required for analysis viability. To avoid the use of classified information, healthcare decisions and the system embedding them became the illustrative example for assessment.

Common modeling system for digital simulation

NASA Technical Reports Server (NTRS)

Painter, Rick

1994-01-01

The Joint Modeling and Simulation System is a tri-service investigation into a common modeling framework for the development digital models. The basis for the success of this framework is an X-window-based, open systems architecture, object-based/oriented methodology, standard interface approach to digital model construction, configuration, execution, and post processing. For years Department of Defense (DOD) agencies have produced various weapon systems/technologies and typically digital representations of the systems/technologies. These digital representations (models) have also been developed for other reasons such as studies and analysis, Cost Effectiveness Analysis (COEA) tradeoffs, etc. Unfortunately, there have been no Modeling and Simulation (M&S) standards, guidelines, or efforts towards commonality in DOD M&S. The typical scenario is an organization hires a contractor to build hardware and in doing so an digital model may be constructed. Until recently, this model was not even obtained by the organization. Even if it was procured, it was on a unique platform, in a unique language, with unique interfaces, and, with the result being UNIQUE maintenance required. Additionally, the constructors of the model expended more effort in writing the 'infrastructure' of the model/simulation (e.g. user interface, database/database management system, data journalizing/archiving, graphical presentations, environment characteristics, other components in the simulation, etc.) than in producing the model of the desired system. Other side effects include: duplication of efforts; varying assumptions; lack of credibility/validation; and decentralization in policy and execution. J-MASS provides the infrastructure, standards, toolset, and architecture to permit M&S developers and analysts to concentrate on the their area of interest.

Center of Excellence for Applied Mathematical and Statistical Research in support of development of multicrop production monitoring capability

NASA Technical Reports Server (NTRS)

Woodward, W. A.; Gray, H. L.

1983-01-01

Efforts in support of the development of multicrop production monitoring capability are reported. In particular, segment level proportion estimation techniques based upon a mixture model were investigated. Efforts have dealt primarily with evaluation of current techniques and development of alternative ones. A comparison of techniques is provided on both simulated and LANDSAT data along with an analysis of the quality of profile variables obtained from LANDSAT data.

Optimizing Global Coronal Magnetic Field Models Using Image-Based Constraints

NASA Technical Reports Server (NTRS)

Jones-Mecholsky, Shaela I.; Davila, Joseph M.; Uritskiy, Vadim

2016-01-01

The coronal magnetic field directly or indirectly affects a majority of the phenomena studied in the heliosphere. It provides energy for coronal heating, controls the release of coronal mass ejections, and drives heliospheric and magnetospheric activity, yet the coronal magnetic field itself has proven difficult to measure. This difficulty has prompted a decades-long effort to develop accurate, timely, models of the field, an effort that continues today. We have developed a method for improving global coronal magnetic field models by incorporating the type of morphological constraints that could be derived from coronal images. Here we report promising initial tests of this approach on two theoretical problems, and discuss opportunities for application.

OPTIMIZING GLOBAL CORONAL MAGNETIC FIELD MODELS USING IMAGE-BASED CONSTRAINTS

DOE Office of Scientific and Technical Information (OSTI.GOV)

Jones, Shaela I.; Davila, Joseph M.; Uritsky, Vadim, E-mail: shaela.i.jonesmecholsky@nasa.gov

The coronal magnetic field directly or indirectly affects a majority of the phenomena studied in the heliosphere. It provides energy for coronal heating, controls the release of coronal mass ejections, and drives heliospheric and magnetospheric activity, yet the coronal magnetic field itself has proven difficult to measure. This difficulty has prompted a decades-long effort to develop accurate, timely, models of the field—an effort that continues today. We have developed a method for improving global coronal magnetic field models by incorporating the type of morphological constraints that could be derived from coronal images. Here we report promising initial tests of thismore » approach on two theoretical problems, and discuss opportunities for application.« less

HABITAT MODELING APPROACHES FOR RESTORATION SITE SELECTION

EPA Science Inventory

Numerous modeling approaches have been used to develop predictive models of species-environment and species-habitat relationships. These models have been used in conservation biology and habitat or species management, but their application to restoration efforts has been minimal...

The Economic Impact of Community College Capacity Development in Developing Countries: A Longitudinal Analysis

ERIC Educational Resources Information Center

Tyndorf, Darryl M., Jr.; Glass, Chris R.

2017-01-01

Developing countries have significantly expanded efforts to import more flexible short-cycle institutions based on the United States community college model. The U.S. community college model addresses human capital needs of the labor market in developing countries by increasing access to an affordable education. However, there is limited research…

Examining the Technology Integration Planning Cycle Model of Professional Development to Support Teachers' Instructional Practices

ERIC Educational Resources Information Center

Hutchison, Amy C.; Woodward, Lindsay

2018-01-01

Background: Presently, models of professional development aimed at supporting teachers' technology integration efforts are often short and decontextualized. With many schools across the country utilizing standards that require students to engage with digital tools, a situative model that supports building teachers' knowledge within their…

An examination of data quality on QSAR Modeling in regards to the environmental sciences (UNC-CH talk)

EPA Science Inventory

The development of QSAR models is critically dependent on the quality of available data. As part of our efforts to develop public platforms to provide access to predictive models, we have attempted to discriminate the influence of the quality versus quantity of data available to...

Memory mechanisms supporting syntactic comprehension.

PubMed

Caplan, David; Waters, Gloria

2013-04-01

Efforts to characterize the memory system that supports sentence comprehension have historically drawn extensively on short-term memory as a source of mechanisms that might apply to sentences. The focus of these efforts has changed significantly in the past decade. As a result of changes in models of short-term working memory (ST-WM) and developments in models of sentence comprehension, the effort to relate entire components of an ST-WM system, such as those in the model developed by Baddeley (Nature Reviews Neuroscience 4: 829-839, 2003) to sentence comprehension has largely been replaced by an effort to relate more specific mechanisms found in modern models of ST-WM to memory processes that support one aspect of sentence comprehension--the assignment of syntactic structure (parsing) and its use in determining sentence meaning (interpretation) during sentence comprehension. In this article, we present the historical background to recent studies of the memory mechanisms that support parsing and interpretation and review recent research into this relation. We argue that the results of this research do not converge on a set of mechanisms derived from ST-WM that apply to parsing and interpretation. We argue that the memory mechanisms supporting parsing and interpretation have features that characterize another memory system that has been postulated to account for skilled performance-long-term working memory. We propose a model of the relation of different aspects of parsing and interpretation to ST-WM and long-term working memory.

High-Fidelity Multi-Rotor Unmanned Aircraft System Simulation Development for Trajectory Prediction Under Off-Nominal Flight Dynamics

NASA Technical Reports Server (NTRS)

Foster, John V.; Hartman, David C.

2017-01-01

The NASA Unmanned Aircraft System (UAS) Traffic Management (UTM) project is conducting research to enable civilian low-altitude airspace and UAS operations. A goal of this project is to develop probabilistic methods to quantify risk during failures and off nominal flight conditions. An important part of this effort is the reliable prediction of feasible trajectories during off-nominal events such as control failure, atmospheric upsets, or navigation anomalies that can cause large deviations from the intended flight path or extreme vehicle upsets beyond the normal flight envelope. Few examples of high-fidelity modeling and prediction of off-nominal behavior for small UAS (sUAS) vehicles exist, and modeling requirements for accurately predicting flight dynamics for out-of-envelope or failure conditions are essentially undefined. In addition, the broad range of sUAS aircraft configurations already being fielded presents a significant modeling challenge, as these vehicles are often very different from one another and are likely to possess dramatically different flight dynamics and resultant trajectories and may require different modeling approaches to capture off-nominal behavior. NASA has undertaken an extensive research effort to define sUAS flight dynamics modeling requirements and develop preliminary high fidelity six degree-of-freedom (6-DOF) simulations capable of more closely predicting off-nominal flight dynamics and trajectories. This research has included a literature review of existing sUAS modeling and simulation work as well as development of experimental testing methods to measure and model key components of propulsion, airframe and control characteristics. The ultimate objective of these efforts is to develop tools to support UTM risk analyses and for the real-time prediction of off-nominal trajectories for use in the UTM Risk Assessment Framework (URAF). This paper focuses on modeling and simulation efforts for a generic quad-rotor configuration typical of many commercial vehicles in use today. An overview of relevant off-nominal multi-rotor behaviors will be presented to define modeling goals and to identify the prediction capability lacking in simplified models of multi-rotor performance. A description of recent NASA wind tunnel testing of multi-rotor propulsion and airframe components will be presented illustrating important experimental and data acquisition methods, and a description of preliminary propulsion and airframe models will be presented. Lastly, examples of predicted off-nominal flight dynamics and trajectories from the simulation will be presented.

Constructing a Shared Mental Model for Faculty Development for the Core Entrustable Professional Activities for Entering Residency.

PubMed

Favreau, Michele A; Tewksbury, Linda; Lupi, Carla; Cutrer, William B; Jokela, Janet A; Yarris, Lalena M

2017-06-01

In 2014, the Association of American Medical Colleges identified 13 Core Entrustable Professional Activities for Entering Residency (Core EPAs), which are activities that entering residents might be expected to perform without direct supervision. This work included the creation of an interinstitutional concept group focused on faculty development efforts, as the processes and tools for teaching and assessing entrustability in undergraduate medical education (UME) are still evolving. In this article, the authors describe a conceptual framework for entrustment that they developed to better prepare all educators involved in entrustment decision making in UME. This framework applies to faculty with limited or longitudinal contact with medical students and to those who contribute to entrustment development or render summative entrustment decisions.The authors describe a shared mental model for entrustment that they developed, based on a critical synthesis of the EPA literature, to serve as a guide for UME faculty development efforts. This model includes four dimensions for Core EPA faculty development: (1) observation skills in authentic settings (workplace-based assessments), (2) coaching and feedback skills, (3) self-assessment and reflection skills, and (4) peer guidance skills developed through a community of practice. These dimensions form a conceptual foundation for meaningful faculty participation in entrustment decision making.The authors also differentiate between the UME learning environment and the graduate medical education learning environment to highlight distinct challenges and opportunities for faculty development in UME settings. They conclude with recommendations and research questions for future Core EPA faculty development efforts.

Soft computing techniques toward modeling the water supplies of Cyprus.

PubMed

Iliadis, L; Maris, F; Tachos, S

2011-10-01

This research effort aims in the application of soft computing techniques toward water resources management. More specifically, the target is the development of reliable soft computing models capable of estimating the water supply for the case of "Germasogeia" mountainous watersheds in Cyprus. Initially, ε-Regression Support Vector Machines (ε-RSVM) and fuzzy weighted ε-RSVMR models have been developed that accept five input parameters. At the same time, reliable artificial neural networks have been developed to perform the same job. The 5-fold cross validation approach has been employed in order to eliminate bad local behaviors and to produce a more representative training data set. Thus, the fuzzy weighted Support Vector Regression (SVR) combined with the fuzzy partition has been employed in an effort to enhance the quality of the results. Several rational and reliable models have been produced that can enhance the efficiency of water policy designers. Copyright © 2011 Elsevier Ltd. All rights reserved.

Basic features of the predictive tools of early warning systems for water-related natural hazards: examples for shallow landslides

NASA Astrophysics Data System (ADS)

Greco, Roberto; Pagano, Luca

2017-12-01

To manage natural risks, an increasing effort is being put in the development of early warning systems (EWS), namely, approaches facing catastrophic phenomena by timely forecasting and alarm spreading throughout exposed population. Research efforts aimed at the development and implementation of effective EWS should especially concern the definition and calibration of the interpretative model. This paper analyses the main features characterizing predictive models working in EWS by discussing their aims and their features in terms of model accuracy, evolutionary stage of the phenomenon at which the prediction is carried out and model architecture. Original classification criteria based on these features are developed throughout the paper and shown in their practical implementation through examples of flow-like landslides and earth flows, both of which are characterized by rapid evolution and quite representative of many applications of EWS.

Ontology-based tools to expedite predictive model construction.

PubMed

Haug, Peter; Holmen, John; Wu, Xinzi; Mynam, Kumar; Ebert, Matthew; Ferraro, Jeffrey

2014-01-01

Large amounts of medical data are collected electronically during the course of caring for patients using modern medical information systems. This data presents an opportunity to develop clinically useful tools through data mining and observational research studies. However, the work necessary to make sense of this data and to integrate it into a research initiative can require substantial effort from medical experts as well as from experts in medical terminology, data extraction, and data analysis. This slows the process of medical research. To reduce the effort required for the construction of computable, diagnostic predictive models, we have developed a system that hybridizes a medical ontology with a large clinical data warehouse. Here we describe components of this system designed to automate the development of preliminary diagnostic models and to provide visual clues that can assist the researcher in planning for further analysis of the data behind these models.

The North American Multi-Model Ensemble (NMME): Phase-1 Seasonal to Interannual Prediction, Phase-2 Toward Developing Intra-Seasonal Prediction

NASA Technical Reports Server (NTRS)

Kirtman, Ben P.; Min, Dughong; Infanti, Johnna M.; Kinter, James L., III; Paolino, Daniel A.; Zhang, Qin; vandenDool, Huug; Saha, Suranjana; Mendez, Malaquias Pena; Becker, Emily;

Integrated modeling of protein-coding genes in the Manduca sexta genome using RNA-Seq data from the biochemical model insect

PubMed Central

Cao, Xiaolong; Jiang, Haobo

2015-01-01

The genome sequence of Manduca sexta was recently determined using 454 technology. Cufflinks and MAKER2 were used to establish gene models in the genome assembly based on the RNA-Seq data and other species' sequences. Aided by the extensive RNA-Seq data from 50 tissue samples at various life stages, annotators over the world (including the present authors) have manually confirmed and improved a small percentage of the models after spending months of effort. While such collaborative efforts are highly commendable, many of the predicted genes still have problems which may hamper future research on this insect species. As a biochemical model representing lepidopteran pests, M. sexta has been used extensively to study insect physiological processes for over five decades. In this work, we assembled Manduca datasets Cufflinks 3.0, Trinity 4.0, and Oases 4.0 to assist the manual annotation efforts and development of Official Gene Set (OGS) 2.0. To further improve annotation quality, we developed methods to evaluate gene models in the MAKER2, Cufflinks, Oases and Trinity assemblies and selected the best ones to constitute MCOT 1.0 after thorough crosschecking. MCOT 1.0 has 18,089 genes encoding 31,666 proteins: 32.8% match OGS 2.0 models perfectly or near perfectly, 11,747 differ considerably, and 29.5% are absent in OGS 2.0. Future automation of this process is anticipated to greatly reduce human efforts in generating comprehensive, reliable models of structural genes in other genome projects where extensive RNA-Seq data are available. PMID:25612938

An Evidence-Based Practitioner's Model for Adolescent Leadership Development

ERIC Educational Resources Information Center

Rehm, Christopher J.

2014-01-01

This paper proposes a model for youth leadership education based on adolescent development and leadership research in an effort to provide practitioners with a practical blueprint to aid their creation and implementation of high school leadership programs. By focusing on student leader development areas which school level educators can affect,…

DEVELOPMENT OF NITROGEN LOADING - RESPONSE RELATIONSHIPS FOR ESTUARINE WATERS USING AN EMPIRICAL COMPARATIVE SYSTEMS APPROACH

EPA Science Inventory

The U.S. EPA Atlantic Ecology Division (AED) has initiated a multi-year research program to develop empirical nitrogen load-response models for embayments in southern New England. This is part of a multi-regional effort to develop nutrient load-response models for the Gulf of Mex...

A quantitative risk model for early lifecycle decision making

NASA Technical Reports Server (NTRS)

Feather, M. S.; Cornford, S. L.; Dunphy, J.; Hicks, K.

2002-01-01

Decisions made in the earliest phases of system development have the most leverage to influence the success of the entire development effort, and yet must be made when information is incomplete and uncertain. We have developed a scalable cost-benefit model to support this critical phase of early-lifecycle decision-making.

Neurotech for Neuroscience: Unifying Concepts, Organizing Principles, and Emerging Tools

PubMed Central

Silver, Rae; Boahen, Kwabena; Grillner, Sten; Kopell, Nancy; Olsen, Kathie L.

2012-01-01

The ability to tackle analysis of the brain at multiple levels simultaneously is emerging from rapid methodological developments. The classical research strategies of “measure,” “model,” and “make” are being applied to the exploration of nervous system function. These include novel conceptual and theoretical approaches, creative use of mathematical modeling, and attempts to build brain-like devices and systems, as well as other developments including instrumentation and statistical modeling (not covered here). Increasingly, these efforts require teams of scientists from a variety of traditional scientific disciplines to work together. The potential of such efforts for understanding directed motor movement, emergence of cognitive function from neuronal activity, and development of neuromimetic computers are described by a team that includes individuals experienced in behavior and neuroscience, mathematics, and engineering. Funding agencies, including the National Science Foundation, explore the potential of these changing frontiers of research for developing research policies and long-term planning. PMID:17978017

Adverse health effects of high-effort/low-reward conditions.

PubMed

Siegrist, J

1996-01-01

In addition to the person-environment fit model (J. R. French, R. D. Caplan, & R. V. Harrison, 1982) and the demand-control model (R. A. Karasek & T. Theorell, 1990), a third theoretical concept is proposed to assess adverse health effects of stressful experience at work: the effort-reward imbalance model. The focus of this model is on reciprocity of exchange in occupational life where high-cost/low-gain conditions are considered particularly stressful. Variables measuring low reward in terms of low status control (e.g., lack of promotion prospects, job insecurity) in association with high extrinsic (e.g., work pressure) or intrinsic (personal coping pattern, e.g., high need for control) effort independently predict new cardiovascular events in a prospective study on blue-collar men. Furthermore, these variables partly explain prevalence of cardiovascular risk factors (hypertension, atherogenic lipids) in 2 independent studies. Studying adverse health effects of high-effort/low-reward conditions seems well justified, especially in view of recent developments of the labor market.

Functional structure and dynamics of the human nervous system

NASA Technical Reports Server (NTRS)

Lawrence, J. A.

1981-01-01

The status of an effort to define the directions needed to take in extending pilot models is reported. These models are needed to perform closed-loop (man-in-the-loop) feedback flight control system designs and to develop cockpit display requirements. The approach taken is to develop a hypothetical working model of the human nervous system by reviewing the current literature in neurology and psychology and to develop a computer model of this hypothetical working model.

Development of full regeneration establishment models for the forest vegetation simulator

Treesearch

John D. Shaw

2015-01-01

For most simulation modeling efforts, the goal of model developers is to produce simulations that are the best representations of realism as possible. Achieving this goal commonly requires a considerable amount of data to set the initial parameters, followed by validation and model improvement – both of which require even more data. The Forest Vegetation Simulator (FVS...

First-Grade Teachers' Response to Three Models of Professional Development in Reading

ERIC Educational Resources Information Center

Carlisle, Joanne F.; Cortina, Kai Schnabel; Katz, Lauren A.

2011-01-01

The purpose of this study was to compare 1st-grade teachers' responses to professional development (PD) programs in reading that differed in means and degree of support for teachers' learning and efforts to improve their reading instruction. We compared 3 models of PD: the 1st model provided only seminars for the teachers, the 2nd model provided…

Geo-Engineering through Internet Informatics (GEMINI)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Doveton, John H.; Watney, W. Lynn

The program, for development and methodologies, was a 3-year interdisciplinary effort to develop an interactive, integrated Internet Website named GEMINI (Geo-Engineering Modeling through Internet Informatics) that would build real-time geo-engineering reservoir models for the Internet using the latest technology in Web applications.

Developing a Modeling Framework for Ecosystem Forecasting: The Lake Michigan Pilot

EPA Science Inventory

Recent multi-party efforts to coordinate modeling activities that support ecosystem management decision-making in the Great Lakes have resulted in the recommendation to convene an interagency working group that will develop a pilot approach for Lake Michigan. The process will br...

ESPC Common Model Architecture Earth System Modeling Framework (ESMF) Software and Application Development

DTIC Science & Technology

2015-09-30

originate from NASA , NOAA , and community modeling efforts, and support for creation of the suite was shared by sponsors from other agencies. ESPS...Framework (ESMF) Software and Application Development Cecelia Deluca NESII/CIRES/ NOAA Earth System Research Laboratory 325 Broadway Boulder, CO...Capability (NUOPC) was established between NOAA and Navy to develop a common software architecture for easy and efficient interoperability. The

COMPARING THE IMPAIRMENT PROFILES OF OLDER DRIVERS AND NON-DRIVERS: TOWARD THE DEVELOPMENT OF A FITNESS-TO-DRIVE MODEL

PubMed Central

Antin, Jonathan F.; Stanley, Laura M.; Guo, Feng

2011-01-01

The purpose of this research effort was to compare older driver and non-driver functional impairment profiles across some 60 assessment metrics in an initial effort to contribute to the development of fitness-to-drive assessment models. Of the metrics evaluated, 21 showed statistically significant differences, almost all favoring the drivers. Also, it was shown that a logistic regression model comprised of five of the assessment scores could completely and accurately separate the two groups. The results of this study imply that older drivers are far less functionally impaired than non-drivers of similar ages, and that a parsimonious model can accurately assign individuals to either group. With such models, any driver classified or diagnosed as a non-driver would be a strong candidate for further investigation and intervention. PMID:22058607

The influence of mitigation on sage-grouse habitat selection within an energy development field.

PubMed

Fedy, Bradley C; Kirol, Christopher P; Sutphin, Andrew L; Maechtle, Thomas L

2015-01-01

Growing global energy demands ensure the continued growth of energy development. Energy development in wildlife areas can significantly impact wildlife populations. Efforts to mitigate development impacts to wildlife are on-going, but the effectiveness of such efforts is seldom monitored or assessed. Greater sage-grouse (Centrocercus urophasianus) are sensitive to energy development and likely serve as an effective umbrella species for other sagebrush-steppe obligate wildlife. We assessed the response of birds within an energy development area before and after the implementation of mitigation action. Additionally, we quantified changes in habitat distribution and abundance in pre- and post-mitigation landscapes. Sage-grouse avoidance of energy development at large spatial scales is well documented. We limited our research to directly within an energy development field in order to assess the influence of mitigation in close proximity to energy infrastructure. We used nest-location data (n = 488) within an energy development field to develop habitat selection models using logistic regression on data from 4 years of research prior to mitigation and for 4 years following the implementation of extensive mitigation efforts (e.g., decreased activity, buried powerlines). The post-mitigation habitat selection models indicated less avoidance of wells (well density β = 0.18 ± 0.08) than the pre-mitigation models (well density β = -0.09 ± 0.11). However, birds still avoided areas of high well density and nests were not found in areas with greater than 4 wells per km2 and the majority of nests (63%) were located in areas with ≤ 1 well per km2. Several other model coefficients differed between the two time periods and indicated stronger selection for sagebrush (pre-mitigation β = 0.30 ± 0.09; post-mitigation β = 0.82 ± 0.08) and less avoidance of rugged terrain (pre-mitigation β = -0.35 ± 0.12; post-mitigation β = -0.05 ± 0.09). Mitigation efforts implemented may be responsible for the measurable improvement in sage-grouse nesting habitats within the development area. However, we cannot reject alternative hypotheses concerning the influence of population density and intraspecific competition. Additionally, we were unable to assess the actual fitness consequences of mitigation or the source-sink dynamics of the habitats. We compared the pre-mitigation and post-mitigation models predicted as maps with habitats ranked from low to high relative probability of use (equal-area bins: 1 - 5). We found more improvement in habitat rank between the two time periods around mitigated wells compared to non-mitigated wells. Informed mitigation within energy development fields could help improve habitats within the field. We recommend that any mitigation effort include well-informed plans to monitor the effectiveness of the implemented mitigation actions that assess both habitat use and relevant fitness parameters.

Vegetation Demographics in Earth System Models: a review of progress and priorities

DOE PAGES

Fisher, Rosie A.; Koven, Charles D.; Anderegg, William R. L.; ...

2017-09-18

Numerous current efforts seek to improve the representation of ecosystem ecology and vegetation demographic processes within Earth System Models (ESMs). Furthermore, these developments are widely viewed as an important step in developing greater realism in predictions of future ecosystem states and fluxes. Increased realism, however, leads to increased model complexity, with new features raising a suite of ecological questions that require empirical constraints. We review the developments that permit the representation of plant demographics in ESMs, and identify issues raised by these developments that highlight important gaps in ecological understanding. These issues inevitably translate into uncertainty in model projections butmore » also allow models to be applied to new processes and questions concerning the dynamics of real-world ecosystems. We also argue that stronger and more innovative connections to data, across the range of scales considered, are required to address these gaps in understanding. The development of first-generation land surface models as a unifying framework for ecophysiological understanding stimulated much research into plant physiological traits and gas exchange. Constraining predictions at ecologically relevant spatial and temporal scales will require a similar investment of effort and intensified inter-disciplinary communication.« less

Vegetation Demographics in Earth System Models: a review of progress and priorities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fisher, Rosie A.; Koven, Charles D.; Anderegg, William R. L.

Numerous current efforts seek to improve the representation of ecosystem ecology and vegetation demographic processes within Earth System Models (ESMs). Furthermore, these developments are widely viewed as an important step in developing greater realism in predictions of future ecosystem states and fluxes. Increased realism, however, leads to increased model complexity, with new features raising a suite of ecological questions that require empirical constraints. We review the developments that permit the representation of plant demographics in ESMs, and identify issues raised by these developments that highlight important gaps in ecological understanding. These issues inevitably translate into uncertainty in model projections butmore » also allow models to be applied to new processes and questions concerning the dynamics of real-world ecosystems. We also argue that stronger and more innovative connections to data, across the range of scales considered, are required to address these gaps in understanding. The development of first-generation land surface models as a unifying framework for ecophysiological understanding stimulated much research into plant physiological traits and gas exchange. Constraining predictions at ecologically relevant spatial and temporal scales will require a similar investment of effort and intensified inter-disciplinary communication.« less

Stress and deformation modeling of multiple rotary combustion engine trochoid housings

NASA Technical Reports Server (NTRS)

Lychuk, W. M.; Bradley, S. A.; Vilmann, C. R.; Passerello, C. E.; Lee, C.-M.

1986-01-01

This paper documents the development of the capability to produce finite element models of alternate trochoid housing configurations. The effort needed to produce these models is greatly reduced by the use of a newly developed specialized finite element preprocessor which is described. The results of static stress comparisons conducted on a Mazda trochoid housing are presented. Planned future development of this modeling capability to operational situations is also presented.

Brigade Combat Team the World’s Police: Understanding the United States Army Brigade Combat Team’s role in Developing Foreign Police

DTIC Science & Technology

2014-06-13

September 2013, fifteen gunmen associated with the terrorist group Al- Shabaab conducted an attack in the Westgate Shopping Mall in Nairobi, Kenya. The... theory , current U.S. Army doctrine, and the lessons learned from the police development efforts in Iraq, a foreign police development model is...civilian police enablers and an understanding of police theory and the lessons learned from previous police reform efforts. 15. SUBJECT TERMS

A Strategy for Autogeneration of Space Shuttle Ground Processing Simulation Models for Project Makespan Estimations

NASA Technical Reports Server (NTRS)

Madden, Michael G.; Wyrick, Roberta; O'Neill, Dale E.

2005-01-01

Space Shuttle Processing is a complicated and highly variable project. The planning and scheduling problem, categorized as a Resource Constrained - Stochastic Project Scheduling Problem (RC-SPSP), has a great deal of variability in the Orbiter Processing Facility (OPF) process flow from one flight to the next. Simulation Modeling is a useful tool in estimation of the makespan of the overall process. However, simulation requires a model to be developed, which itself is a labor and time consuming effort. With such a dynamic process, often the model would potentially be out of synchronization with the actual process, limiting the applicability of the simulation answers in solving the actual estimation problem. Integration of TEAMS model enabling software with our existing schedule program software is the basis of our solution. This paper explains the approach used to develop an auto-generated simulation model from planning and schedule efforts and available data.

Fusing modeling techniques to support domain analysis for reuse opportunities identification

NASA Technical Reports Server (NTRS)

Hall, Susan Main; Mcguire, Eileen

1993-01-01

Functional modeling techniques or object-oriented graphical representations, which are more useful to someone trying to understand the general design or high level requirements of a system? For a recent domain analysis effort, the answer was a fusion of popular modeling techniques of both types. By using both functional and object-oriented techniques, the analysts involved were able to lean on their experience in function oriented software development, while taking advantage of the descriptive power available in object oriented models. In addition, a base of familiar modeling methods permitted the group of mostly new domain analysts to learn the details of the domain analysis process while producing a quality product. This paper describes the background of this project and then provides a high level definition of domain analysis. The majority of this paper focuses on the modeling method developed and utilized during this analysis effort.

Integrated Science: Florida Manatees and Everglades Hydrology

USGS Publications Warehouse

Langtimm, Catherine A.; Swain, Eric D.; Stith, Bradley M.; Reid, James P.; Slone, Daniel H.; Decker, Jeremy; Butler, Susan M.; Doyle, Terry; Snow, R.W.

2009-01-01

Predicting and monitoring restoration effects on Florida manatees, which are known to make extended movements, will be incomplete if modeling and monitoring are limited to the smaller areas defined by the various res-toration components. U.S. Geological Survey (USGS) efforts, thus far, have focused on (1) collecting manatee movement data throughout the Ten Thousand Islands (TTI) region, and (2) developing an individual-based model for manatees to illustrate manatee responses to changes in hydrology related to the Picayune Strand Restoration Project (PSRP). In 2006, new regional research was begun to extend an Everglades hydrology model into the TTI region; extend the manatee movement model into the southern estuaries of Everglades National Park (ENP); and integrate hydrology and manatee data, models, and monitoring across the TTI region and ENP. Currently (2008), three research tasks are underway to develop the necessary modeling components to assess restoration efforts across the Greater Everglades Ecosystem.

Fatigue crack growth in fiber reinforced plastics

NASA Technical Reports Server (NTRS)

Mandell, J. F.

1979-01-01

Fatigue crack growth in fiber composites occurs by such complex modes as to frustrate efforts at developing comprehensive theories and models. Under certain loading conditions and with certain types of reinforcement, simpler modes of fatigue crack growth are observed. These modes are more amenable to modeling efforts, and the fatigue crack growth rate can be predicted in some cases. Thus, a formula for prediction of ligamented mode fatigue crack growth rate is available.

Biomechanics of Head, Neck, and Chest Injury Prevention for Soldiers: Phase 2 and 3

DTIC Science & Technology

2016-08-01

understanding of the biomechanics of the head and brain. Task 2.3 details the computational modeling efforts conducted to evaluate the response of the...section also details the progress made on the development of a testing apparatus to evaluate cervical spine implants in survivable loading scenarios...computational modeling efforts conducted to evaluate the response of the cervical spine and the effects of cervical arthrodesis and arthroplasty during

Efficient Non-Hydrostatic Modeling of Rotational, Turbulent, Dispersive, and Variable-Density Flows in the Vicinity of River Mouths and Inlets: Development and Field Support

DTIC Science & Technology

2013-09-30

numerical efforts undertaken here implement established aspects of Boussinesq -type modeling, developed by the PI and other researchers. These aspects...the Boussinesq -type framework, and then implement in a numerical model. Once this comprehensive model is developed and tested against established...phenomena that might be observed at New River. WORK COMPLETED In FY13 we have continued the development of a Boussinesq -type formulation that

Computational Models of Anterior Cingulate Cortex: At the Crossroads between Prediction and Effort.

PubMed

Vassena, Eliana; Holroyd, Clay B; Alexander, William H

2017-01-01

In the last two decades the anterior cingulate cortex (ACC) has become one of the most investigated areas of the brain. Extensive neuroimaging evidence suggests countless functions for this region, ranging from conflict and error coding, to social cognition, pain and effortful control. In response to this burgeoning amount of data, a proliferation of computational models has tried to characterize the neurocognitive architecture of ACC. Early seminal models provided a computational explanation for a relatively circumscribed set of empirical findings, mainly accounting for EEG and fMRI evidence. More recent models have focused on ACC's contribution to effortful control. In parallel to these developments, several proposals attempted to explain within a single computational framework a wider variety of empirical findings that span different cognitive processes and experimental modalities. Here we critically evaluate these modeling attempts, highlighting the continued need to reconcile the array of disparate ACC observations within a coherent, unifying framework.

Net benefits of wildfire prevention education efforts

Treesearch

Jeffrey P. Prestemon; David T. Butry; Karen L. Abt; Ronda Sutphen

2010-01-01

Wildfire prevention education efforts involve a variety of methods, including airing public service announcements, distributing brochures, and making presentations, which are intended to reduce the occurrence of certain kinds of wildfires. A Poisson model of preventable Florida wildfires from 2002 to 2007 by fire management region was developed. Controlling for...

A Model for Projection of Instructional Activity in a Multi-Campus University.

ERIC Educational Resources Information Center

Tallman, B. M.; Newton, R. D.

This report is concerned with the development of a model for projecting instructional activity and its application within The Pennsylvania State University. Inasmuch as models of this type have been developed at a number of institutions of higher education, the effort described in this report does not constitute an extension of fundamental…

Allocation model for firefighting resources ... a progress report

Treesearch

Frederick W. Bratten

1970-01-01

A study is underway at the Pacific Southwest Forest and Range Experiment Station to develop computer techniques for planning suppression efforts in large wildfires. A mathematical model for allocation of firefighting resources in a going fire has been developed. Explicit definitions are given for strategic and tactical planning functions. How the model might be used is...

ERD WATERSHED AND WATER QUALITY MODEL DEVELOPMENT AND TECHNICAL SUPPORT PROGRAM

EPA Science Inventory

The ERD has a long history in providing model research and development and technical support to Regions, States and the Office of Water for watersheds/water quality ecosystem research. The ERD efforts are described in major subtasks comprising the Program. Briefly, these are:

Development of a dynamic traffic assignment model to evaluate lane-reversal plans for I-65.

DOT National Transportation Integrated Search

2010-05-01

This report presents the methodology and results from a project that studied contra-flow operations in support of : hurricane evacuations in the state of Alabama. As part of this effort, a simulation model was developed using the : VISTA platform for...

Primates and the evolution of long, slow life histories.

PubMed

Jones, James Holland

2011-09-27

Primates are characterized by relatively late ages at first reproduction, long lives and low fertility. Together, these traits define a life-history of reduced reproductive effort. Understanding the optimal allocation of reproductive effort, and specifically reduced reproductive effort, has been one of the key problems motivating the development of life-history theory. Because of their unusual constellation of life-history traits, primates play an important role in the continued development of life-history theory. In this review, I present the evidence for the reduced reproductive effort life histories of primates and discuss the ways that such life-history tactics are understood in contemporary theory. Such tactics are particularly consistent with the predictions of stochastic demographic models, suggesting a key role for environmental variability in the evolution of primate life histories. The tendency for primates to specialize in high-quality, high-variability food items may make them particularly susceptible to environmental variability and explains their low reproductive-effort tactics. I discuss recent applications of life-history theory to human evolution and emphasize the continuity between models used to explain peculiarities of human reproduction and senescence with the long, slow life histories of primates more generally. Copyright © 2011 Elsevier Ltd. All rights reserved.

Primates and the Evolution of Long-Slow Life Histories

PubMed Central

Jones, James Holland

2011-01-01

Summary Primates are characterized by relatively late ages at first reproduction, long lives and low fertility. Together, these traits define a life-history of reduced reproductive effort. Understanding the optimal allocation of reproductive effort, and specifically reduced reproductive effort, has been one of the key problems motivating the development of life history theory. Because of their unusual constellation of life-history traits, primates play an important role in the continued development of life history theory. In this review, I present the evidence for the reduced reproductive effort life histories of primates and discuss the ways that such life-history tactics are understood in contemporary theory. Such tactics are particularly consistent with the predictions of stochastic demographic models, suggesting a key role for environmental variability in the evolution of primate life histories. The tendency for primates to specialize in high-quality, high-variability food items may make them particularly susceptible to environmental variability and explain their low reproductive-effort tactics. I discuss recent applications of life history theory to human evolution and emphasize the continuity between models used to explain peculiarities of human reproduction and senescence with the long, slow life histories of primates more generally. PMID:21959161

Development of Modeling Capabilities for Launch Pad Acoustics and Ignition Transient Environment Prediction

NASA Technical Reports Server (NTRS)

West, Jeff; Strutzenberg, Louise L.; Putnam, Gabriel C.; Liever, Peter A.; Williams, Brandon R.

2012-01-01

This paper presents development efforts to establish modeling capabilities for launch vehicle liftoff acoustics and ignition transient environment predictions. Peak acoustic loads experienced by the launch vehicle occur during liftoff with strong interaction between the vehicle and the launch facility. Acoustic prediction engineering tools based on empirical models are of limited value in efforts to proactively design and optimize launch vehicles and launch facility configurations for liftoff acoustics. Modeling approaches are needed that capture the important details of the plume flow environment including the ignition transient, identify the noise generation sources, and allow assessment of the effects of launch pad geometric details and acoustic mitigation measures such as water injection. This paper presents a status of the CFD tools developed by the MSFC Fluid Dynamics Branch featuring advanced multi-physics modeling capabilities developed towards this goal. Validation and application examples are presented along with an overview of application in the prediction of liftoff environments and the design of targeted mitigation measures such as launch pad configuration and sound suppression water placement.

Proceedings of the Workshop on Government Oil Spill Modeling

NASA Technical Reports Server (NTRS)

Bishop, J. M. (Compiler)

1980-01-01

Oil spill model users and modelers were brought together for the purpose of fostering joint communication and increasing understanding of mutual problems. The workshop concentrated on defining user needs, presentations on ongoing modeling programs, and discussions of supporting research for these modeling efforts. Specific user recommendations include the development of an oil spill model user library which identifies and describes available models. The development of models for the long-term fate and effect of spilled oil was examined.

Nonequilibrium radiation and chemistry models for aerocapture vehicle flowfields

NASA Technical Reports Server (NTRS)

Carlson, Leland A.

1990-01-01

The primary tasks during January 1990 to June 1990 have been the development and evaluation of various electron and electron-electronic energy equation models, the continued development of improved nonequilibrium radiation models for molecules and atoms, and the continued development and investigation of precursor models and their effects. In addition, work was initiated to develop a vibrational model for the viscous shock layer (VSL) nonequilibrium chemistry blunt body engineering code. Also, an effort was started associated with the effects of including carbon species, say from an ablator, in the flowfield.

Ni-Co laterite deposits

USGS Publications Warehouse

Marsh, Erin E.; Anderson, Eric D.

2011-01-01

Nickel-cobalt (Ni-Co) laterite deposits are an important source of nickel (Ni). Currently, there is a decline in magmatic Ni-bearing sulfide lode deposit resources. New efforts to develop an alternative source of Ni, particularly with improved metallurgy processes, make the Ni-Co laterites an important exploration target in anticipation of the future demand for Ni. This deposit model provides a general description of the geology and mineralogy of Ni-Co laterite deposits, and contains discussion of the influences of climate, geomorphology (relief), drainage, tectonism, structure, and protolith on the development of favorable weathering profiles. This model of Ni-Co laterite deposits represents part of the U.S. Geological Survey Mineral Resources Program's effort to update the existing models to be used for an upcoming national mineral resource assessment.

Improve SSME power balance model

NASA Technical Reports Server (NTRS)

Karr, Gerald R.

1992-01-01

Effort was dedicated to development and testing of a formal strategy for reconciling uncertain test data with physically limited computational prediction. Specific weaknesses in the logical structure of the current Power Balance Model (PBM) version are described with emphasis given to the main routing subroutines BAL and DATRED. Selected results from a variational analysis of PBM predictions are compared to Technology Test Bed (TTB) variational study results to assess PBM predictive capability. The motivation for systematic integration of uncertain test data with computational predictions based on limited physical models is provided. The theoretical foundation for the reconciliation strategy developed in this effort is presented, and results of a reconciliation analysis of the Space Shuttle Main Engine (SSME) high pressure fuel side turbopump subsystem are examined.

Integrated modeling of advanced optical systems

NASA Astrophysics Data System (ADS)

Briggs, Hugh C.; Needels, Laura; Levine, B. Martin

1993-02-01

This poster session paper describes an integrated modeling and analysis capability being developed at JPL under funding provided by the JPL Director's Discretionary Fund and the JPL Control/Structure Interaction Program (CSI). The posters briefly summarize the program capabilities and illustrate them with an example problem. The computer programs developed under this effort will provide an unprecedented capability for integrated modeling and design of high performance optical spacecraft. The engineering disciplines supported include structural dynamics, controls, optics and thermodynamics. Such tools are needed in order to evaluate the end-to-end system performance of spacecraft such as OSI, POINTS, and SMMM. This paper illustrates the proof-of-concept tools that have been developed to establish the technology requirements and demonstrate the new features of integrated modeling and design. The current program also includes implementation of a prototype tool based upon the CAESY environment being developed under the NASA Guidance and Control Research and Technology Computational Controls Program. This prototype will be available late in FY-92. The development plan proposes a major software production effort to fabricate, deliver, support and maintain a national-class tool from FY-93 through FY-95.

Making Progress Toward Graduation: Evidence from the Talent Development High School Model

ERIC Educational Resources Information Center

Kemple, James J.; Herlihy, Corinne M.; Smith, Thomas J.

2005-01-01

In low-performing public high schools in U.S. cities, high proportions of students drop out, students who stay in school typically do not succeed academically, and efforts to make substantial reforms often meet with little success. The Talent Development High School model is a comprehensive school reform initiative that has been developed to…

An explanatory model of academic achievement based on aptitudes, goal orientations, self-concept and learning strategies.

PubMed

Miñano Pérez, Pablo; Castejón Costa, Juan-Luis; Gilar Corbí, Raquel

2012-03-01

As a result of studies examining factors involved in the learning process, various structural models have been developed to explain the direct and indirect effects that occur between the variables in these models. The objective was to evaluate a structural model of cognitive and motivational variables predicting academic achievement, including general intelligence, academic self-concept, goal orientations, effort and learning strategies. The sample comprised of 341 Spanish students in the first year of compulsory secondary education. Different tests and questionnaires were used to evaluate each variable, and Structural Equation Modelling (SEM) was applied to contrast the relationships of the initial model. The model proposed had a satisfactory fit, and all the hypothesised relationships were significant. General intelligence was the variable most able to explain academic achievement. Also important was the direct influence of academic self-concept on achievement, goal orientations and effort, as well as the mediating ability of effort and learning strategies between academic goals and final achievement.

Nuclear Explosion Monitoring Advances and Challenges

NASA Astrophysics Data System (ADS)

Baker, G. E.

2015-12-01

We address the state-of-the-art in areas important to monitoring, current challenges, specific efforts that illustrate approaches addressing shortcomings in capabilities, and additional approaches that might be helpful. The exponential increase in the number of events that must be screened as magnitude thresholds decrease presents one of the greatest challenges. Ongoing efforts to exploit repeat seismic events using waveform correlation, subspace methods, and empirical matched field processing holds as much "game-changing" promise as anything being done, and further efforts to develop and apply such methods efficiently are critical. Greater accuracy of travel time, signal loss, and full waveform predictions are still needed to better locate and discriminate seismic events. Important developments include methods to model velocities using multiple types of data; to model attenuation with better separation of source, path, and site effects; and to model focusing and defocusing of surface waves. Current efforts to model higher frequency full waveforms are likely to improve source characterization while more effective estimation of attenuation from ambient noise holds promise for filling in gaps. Censoring in attenuation modeling is a critical problem to address. Quantifying uncertainty of discriminants is key to their operational use. Efforts to do so for moment tensor (MT) inversion are particularly important, and fundamental progress on the statistics of MT distributions is the most important advance needed in the near term in this area. Source physics is seeing great progress through theoretical, experimental, and simulation studies. The biggest need is to accurately predict the effects of source conditions on seismic generation. Uniqueness is the challenge here. Progress will depend on studies that probe what distinguishes mechanisms, rather than whether one of many possible mechanisms is consistent with some set of observations.

The study on knowledge transferring incentive for information system requirement development

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, Yang

2015-03-10

Information system requirement development is a process of users’ knowledge sharing and transferring. However the tacit requirements developing is a main problem during requirement development process, for the reason of difficult to encoding, express, and communicate. Knowledge fusion and corporate effort is needed to finding tacit requirements. Under this background, our paper try to find out the rule of effort dynamic evolutionary of software developer and user by building an evolutionary game model on the condition of incentive system. And in addition this paper provides an in depth discussion at the end of this paper.

How alternative payment models in emergency medicine can benefit physicians, payers, and patients.

PubMed

Harish, Nir J; Miller, Harold D; Pines, Jesse M; Zane, Richard D; Wiler, Jennifer L

2017-06-01

While there has been considerable effort devoted to developing alternative payment models (APMs) for primary care physicians and for episodes of care beginning with inpatient admissions, there has been relatively little attention by payers to developing APMs for specialty ambulatory care, and no efforts to develop APMs that explicitly focus on emergency care. In order to ensure that emergency care is appropriately integrated and valued in future payment models, emergency physicians (EPs) must engage with the stakeholders within the broader health care system. In this article, we describe a framework for the development of APMs for emergency medicine and present four examples of APMs that may be applicable in emergency medicine. A better understanding of how APMs can work in emergency medicine will help EPs develop new APMs that improve the cost and quality of care, and leverage the value that emergency care brings to the system. Copyright © 2017 Elsevier Inc. All rights reserved.

ASTP ranging system mathematical model

NASA Technical Reports Server (NTRS)

Ellis, M. R.; Robinson, L. H.

1973-01-01

A mathematical model is presented of the VHF ranging system to analyze the performance of the Apollo-Soyuz test project (ASTP). The system was adapted for use in the ASTP. The ranging system mathematical model is presented in block diagram form, and a brief description of the overall model is also included. A procedure for implementing the math model is presented along with a discussion of the validation of the math model and the overall summary and conclusions of the study effort. Detailed appendices of the five study tasks are presented: early late gate model development, unlock probability development, system error model development, probability of acquisition and model development, and math model validation testing.

Applying a Service-Oriented Architecture to Operational Flight Program Development

DTIC Science & Technology

2007-09-01

using two Java 2 Enterprise Edition (J2EE) Web servers. The weapon models were accessed using a SUN Microsystems Java Web Services Development Pack...Oriented Architectures 22 CROSSTALK The Journal of Defense Software Engineering September 2007 tion, and Spring/ Hibernate to provide the data access...tion since a major coding effort was avoided. The majority of the effort was tweaking pre-existing Java source code and editing of eXtensible Markup

Transient Inverse Calibration of Site-Wide Groundwater Model to Hanford Operational Impacts from 1943 to 1996--Alternative Conceptual Model Considering Interaction with Uppermost Basalt Confined Aquifer

DOE Office of Scientific and Technical Information (OSTI.GOV)

Vermeul, Vincent R.; Cole, Charles R.; Bergeron, Marcel P.

2001-08-29

The baseline three-dimensional transient inverse model for the estimation of site-wide scale flow parameters, including their uncertainties, using data on the transient behavior of the unconfined aquifer system over the entire historical period of Hanford operations, has been modified to account for the effects of basalt intercommunication between the Hanford unconfined aquifer and the underlying upper basalt confined aquifer. Both the baseline and alternative conceptual models (ACM-1) considered only the groundwater flow component and corresponding observational data in the 3-Dl transient inverse calibration efforts. Subsequent efforts will examine both groundwater flow and transport. Comparisons of goodness of fit measures andmore » parameter estimation results for the ACM-1 transient inverse calibrated model with those from previous site-wide groundwater modeling efforts illustrate that the new 3-D transient inverse model approach will strengthen the technical defensibility of the final model(s) and provide the ability to incorporate uncertainty in predictions related to both conceptual model and parameter uncertainty. These results, however, indicate that additional improvements are required to the conceptual model framework. An investigation was initiated at the end of this basalt inverse modeling effort to determine whether facies-based zonation would improve specific yield parameter estimation results (ACM-2). A description of the justification and methodology to develop this zonation is discussed.« less

Development of collision dynamics models to estimate the results of full-scale rail vehicle impact tests : Tufts University Master's Thesis

DOT National Transportation Integrated Search

2000-11-01

In an effort to study occupant survivability in train collisions, analyses and tests were conducted to understand and improve the crashworthiness of rail vehicles. A collision dynamics model was developed in order to estimate the rigid body motion of...

Neoclassical and Institutional Economics as Foundations for Human Resource Development Theory

ERIC Educational Resources Information Center

Wang, Greg G.; Holton, Elwood F., III

2005-01-01

In an effort to more comprehensively understand economics as a foundation of human resource development (HRD), this article reviews economic theories and models pertinent to HRD research and theory building. By examining neoclassical and neoinstitutional schools of contemporary economics, especially the screening model and the internal labor…

A Model for Conducting and Assessing Interdisciplinary Undergraduate Dissertations

ERIC Educational Resources Information Center

Engström, Henrik

2015-01-01

This paper presents an effort to create a unified model for conducting and assessing undergraduate dissertations, shared by all disciplines involved in computer game development at a Swedish university. Computer game development includes technology-oriented disciplines as well as disciplines with aesthetical traditions. The challenge has been to…

Predictive Models for Semiconductor Device Design and Processing

NASA Technical Reports Server (NTRS)

Meyyappan, Meyya; Arnold, James O. (Technical Monitor)

1998-01-01

The device feature size continues to be on a downward trend with a simultaneous upward trend in wafer size to 300 mm. Predictive models are needed more than ever before for this reason. At NASA Ames, a Device and Process Modeling effort has been initiated recently with a view to address these issues. Our activities cover sub-micron device physics, process and equipment modeling, computational chemistry and material science. This talk would outline these efforts and emphasize the interaction among various components. The device physics component is largely based on integrating quantum effects into device simulators. We have two parallel efforts, one based on a quantum mechanics approach and the second, a semiclassical hydrodynamics approach with quantum correction terms. Under the first approach, three different quantum simulators are being developed and compared: a nonequlibrium Green's function (NEGF) approach, Wigner function approach, and a density matrix approach. In this talk, results using various codes will be presented. Our process modeling work focuses primarily on epitaxy and etching using first-principles models coupling reactor level and wafer level features. For the latter, we are using a novel approach based on Level Set theory. Sample results from this effort will also be presented.

Memory mechanisms supporting syntactic comprehension

PubMed Central

Waters, Gloria

2013-01-01

Efforts to characterize the memory system that supports sentence comprehension have historically drawn extensively on short-term memory as a source of mechanisms that might apply to sentences. The focus of these efforts has changed significantly in the past decade. As a result of changes in models of short-term working memory (ST-WM) and developments in models of sentence comprehension, the effort to relate entire components of an ST-WM system, such as those in the model developed by Baddeley (Nature Reviews Neuroscience 4: 829–839, 2003) to sentence comprehension has largely been replaced by an effort to relate more specific mechanisms found in modern models of ST-WM to memory processes that support one aspect of sentence comprehension—the assignment of syntactic structure (parsing) and its use in determining sentence meaning (interpretation) during sentence comprehension. In this article, we present the historical background to recent studies of the memory mechanisms that support parsing and interpretation and review recent research into this relation. We argue that the results of this research do not converge on a set of mechanisms derived from ST-WM that apply to parsing and interpretation. We argue that the memory mechanisms supporting parsing and interpretation have features that characterize another memory system that has been postulated to account for skilled performance—long-term working memory. We propose a model of the relation of different aspects of parsing and interpretation to ST-WM and long-term working memory. PMID:23319178

Design, fabrication and test of a trace contaminant control system

NASA Technical Reports Server (NTRS)

1975-01-01

A trace contaminant control system was designed, fabricated, and evaluated to determine suitability of the system concept to future manned spacecraft. Two different models were considered. The load model initially required by the contract was based on the Space Station Prototype (SSP) general specifications SVSK HS4655, reflecting a change from a 9 man crew to a 6 man crew of the model developed in previous phases of this effort. Trade studies and a system preliminary design were accomplished based on this contaminant load, including computer analyses to define the optimum system configuration in terms of component arrangements, flow rates and component sizing. At the completion of the preliminary design effort a revised contaminant load model was developed for the SSP. Additional analyses were then conducted to define the impact of this new contaminant load model on the system configuration. A full scale foam-core mock-up with the appropriate SSP system interfaces was also fabricated.

Defining Scenarios: Linking Integrated Models, Regional Concerns, and Stakeholders

NASA Astrophysics Data System (ADS)

Hartmann, H. C.; Stewart, S.; Liu, Y.; Mahmoud, M.

2007-05-01

Scenarios are important tools for long-term planning, and there is great interest in using integrated models in scenario studies. However, scenario definition and assessment are creative, as well as scientific, efforts. Using facilitated creative processes, we have worked with stakeholders to define regionally significant scenarios that encompass a broad range of hydroclimatic, socioeconomic, and institutional dimensions. The regional scenarios subsequently inform the definition of local scenarios that work with context-specific integrated models that, individually, can address only a subset of overall regional complexity. Based on concerns of stakeholders in the semi-arid US Southwest, we prioritized three dimensions that are especially important, yet highly uncertain, for long-term planning: hydroclimatic conditions (increased variability, persistent drought), development patterns (urban consolidation, distributed rural development), and the nature of public institutions (stressed, proactive). Linking across real-world decision contexts and integrated modeling efforts poses challenges of creatively connecting the conceptual models held by both the research and stakeholder communities.

Integrated modeling of protein-coding genes in the Manduca sexta genome using RNA-Seq data from the biochemical model insect.

PubMed

Cao, Xiaolong; Jiang, Haobo

2015-07-01

The genome sequence of Manduca sexta was recently determined using 454 technology. Cufflinks and MAKER2 were used to establish gene models in the genome assembly based on the RNA-Seq data and other species' sequences. Aided by the extensive RNA-Seq data from 50 tissue samples at various life stages, annotators over the world (including the present authors) have manually confirmed and improved a small percentage of the models after spending months of effort. While such collaborative efforts are highly commendable, many of the predicted genes still have problems which may hamper future research on this insect species. As a biochemical model representing lepidopteran pests, M. sexta has been used extensively to study insect physiological processes for over five decades. In this work, we assembled Manduca datasets Cufflinks 3.0, Trinity 4.0, and Oases 4.0 to assist the manual annotation efforts and development of Official Gene Set (OGS) 2.0. To further improve annotation quality, we developed methods to evaluate gene models in the MAKER2, Cufflinks, Oases and Trinity assemblies and selected the best ones to constitute MCOT 1.0 after thorough crosschecking. MCOT 1.0 has 18,089 genes encoding 31,666 proteins: 32.8% match OGS 2.0 models perfectly or near perfectly, 11,747 differ considerably, and 29.5% are absent in OGS 2.0. Future automation of this process is anticipated to greatly reduce human efforts in generating comprehensive, reliable models of structural genes in other genome projects where extensive RNA-Seq data are available. Copyright © 2015 Elsevier Ltd. All rights reserved.

Impacts of Daily Bag Limit Reductions on Angler Effort in Wisconsin Walleye Lakes

USGS Publications Warehouse

Beard, T.D.; Cox, S.P.; Carpenter, S.R.

2003-01-01

Angler effort is an important factor affecting recreational fisheries. However, angler responses are rarely incorporated into recreational fisheries regulations or predictions. Few have attempted to examine how daily bag limit regulations affect total angling pressure and subsequent stock densities. Our paper develops a theoretical basis for predicting angler effort and harvest rate based on stock densities and bag limit regulations. We examined data from a management system that controls the total exploitation of walleyes Sander vitreus (formerly Stizostedion vitreum) in northern Wisconsin lakes and compared these empirical results with the predictions from a theoretical effort and harvest rate response model. The data indicated that higher general angler effort occurs on lakes regulated with a 5-walleye daily limit than on lakes regulated with either a 2- or 3-walleye daily limit. General walleye catch rates were lower on lakes with a 5-walleye limit than on lakes with either a 2- or 3-walleye daily limit. An effort response model predicted a logarithmic relationship between angler effort and adult walleye density and that an index of attractiveness would be greater on lakes with high bag limits. Predictions from the harvest rate model with constant walleye catchability indicated that harvest rates increased nonlinearly with increasing density. When the effort model was fitted to data from northern Wisconsin, we found higher lake attractiveness at 5-walleye-limit lakes. We conclude that different groups of anglers respond differently to bag limit changes and that reliance on daily bag limits may not be sufficient to maintain high walleye densities in some lakes in this region.

Rapid Prototyping of Hydrologic Model Interfaces with IPython

NASA Astrophysics Data System (ADS)

Farthing, M. W.; Winters, K. D.; Ahmadia, A. J.; Hesser, T.; Howington, S. E.; Johnson, B. D.; Tate, J.; Kees, C. E.

2014-12-01

A significant gulf still exists between the state of practice and state of the art in hydrologic modeling. Part of this gulf is due to the lack of adequate pre- and post-processing tools for newly developed computational models. The development of user interfaces has traditionally lagged several years behind the development of a particular computational model or suite of models. As a result, models with mature interfaces often lack key advancements in model formulation, solution methods, and/or software design and technology. Part of the problem has been a focus on developing monolithic tools to provide comprehensive interfaces for the entire suite of model capabilities. Such efforts require expertise in software libraries and frameworks for creating user interfaces (e.g., Tcl/Tk, Qt, and MFC). These tools are complex and require significant investment in project resources (time and/or money) to use. Moreover, providing the required features for the entire range of possible applications and analyses creates a cumbersome interface. For a particular site or application, the modeling requirements may be simplified or at least narrowed, which can greatly reduce the number and complexity of options that need to be accessible to the user. However, monolithic tools usually are not adept at dynamically exposing specific workflows. Our approach is to deliver highly tailored interfaces to users. These interfaces may be site and/or process specific. As a result, we end up with many, customized interfaces rather than a single, general-use tool. For this approach to be successful, it must be efficient to create these tailored interfaces. We need technology for creating quality user interfaces that is accessible and has a low barrier for integration into model development efforts. Here, we present efforts to leverage IPython notebooks as tools for rapid prototyping of site and application-specific user interfaces. We provide specific examples from applications in near-shore environments as well as levee analysis. We discuss our design decisions and methodology for developing customized interfaces, strategies for delivery of the interfaces to users in various computing environments, as well as implications for the design/implementation of simulation models.

Modeling and Analysis of Power Processing Systems (MAPPS), initial phase 2

NASA Technical Reports Server (NTRS)

Yu, Y.; Lee, F. C.; Wangenheim, H.; Warren, D.

1977-01-01

The overall objective of the program is to provide the engineering tools to reduce the analysis, design, and development effort, and thus the cost, in achieving the required performances for switching regulators and dc-dc converter systems. The program was both tutorial and application oriented. Various analytical methods were described in detail and supplemented with examples, and those with standardization appeals were reduced into computer-based subprograms. Major program efforts included those concerning small and large signal control-dependent performance analysis and simulation, control circuit design, power circuit design and optimization, system configuration study, and system performance simulation. Techniques including discrete time domain, conventional frequency domain, Lagrange multiplier, nonlinear programming, and control design synthesis were employed in these efforts. To enhance interactive conversation between the modeling and analysis subprograms and the user, a working prototype of the Data Management Program was also developed to facilitate expansion as future subprogram capabilities increase.

Nuclear Engine System Simulation (NESS). Volume 1: Program user's guide

NASA Astrophysics Data System (ADS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.

1993-03-01

A Nuclear Thermal Propulsion (NTP) engine system design analysis tool is required to support current and future Space Exploration Initiative (SEI) propulsion and vehicle design studies. Currently available NTP engine design models are those developed during the NERVA program in the 1960's and early 1970's and are highly unique to that design or are modifications of current liquid propulsion system design models. To date, NTP engine-based liquid design models lack integrated design of key NTP engine design features in the areas of reactor, shielding, multi-propellant capability, and multi-redundant pump feed fuel systems. Additionally, since the SEI effort is in the initial development stage, a robust, verified NTP analysis design tool could be of great use to the community. This effort developed an NTP engine system design analysis program (tool), known as the Nuclear Engine System Simulation (NESS) program, to support ongoing and future engine system and stage design study efforts. In this effort, Science Applications International Corporation's (SAIC) NTP version of the Expanded Liquid Engine Simulation (ELES) program was modified extensively to include Westinghouse Electric Corporation's near-term solid-core reactor design model. The ELES program has extensive capability to conduct preliminary system design analysis of liquid rocket systems and vehicles. The program is modular in nature and is versatile in terms of modeling state-of-the-art component and system options as discussed. The Westinghouse reactor design model, which was integrated in the NESS program, is based on the near-term solid-core ENABLER NTP reactor design concept. This program is now capable of accurately modeling (characterizing) a complete near-term solid-core NTP engine system in great detail, for a number of design options, in an efficient manner. The following discussion summarizes the overall analysis methodology, key assumptions, and capabilities associated with the NESS presents an example problem, and compares the results to related NTP engine system designs. Initial installation instructions and program disks are in Volume 2 of the NESS Program User's Guide.

Nuclear Engine System Simulation (NESS). Volume 1: Program user's guide

NASA Technical Reports Server (NTRS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.

1993-01-01

A Nuclear Thermal Propulsion (NTP) engine system design analysis tool is required to support current and future Space Exploration Initiative (SEI) propulsion and vehicle design studies. Currently available NTP engine design models are those developed during the NERVA program in the 1960's and early 1970's and are highly unique to that design or are modifications of current liquid propulsion system design models. To date, NTP engine-based liquid design models lack integrated design of key NTP engine design features in the areas of reactor, shielding, multi-propellant capability, and multi-redundant pump feed fuel systems. Additionally, since the SEI effort is in the initial development stage, a robust, verified NTP analysis design tool could be of great use to the community. This effort developed an NTP engine system design analysis program (tool), known as the Nuclear Engine System Simulation (NESS) program, to support ongoing and future engine system and stage design study efforts. In this effort, Science Applications International Corporation's (SAIC) NTP version of the Expanded Liquid Engine Simulation (ELES) program was modified extensively to include Westinghouse Electric Corporation's near-term solid-core reactor design model. The ELES program has extensive capability to conduct preliminary system design analysis of liquid rocket systems and vehicles. The program is modular in nature and is versatile in terms of modeling state-of-the-art component and system options as discussed. The Westinghouse reactor design model, which was integrated in the NESS program, is based on the near-term solid-core ENABLER NTP reactor design concept. This program is now capable of accurately modeling (characterizing) a complete near-term solid-core NTP engine system in great detail, for a number of design options, in an efficient manner. The following discussion summarizes the overall analysis methodology, key assumptions, and capabilities associated with the NESS presents an example problem, and compares the results to related NTP engine system designs. Initial installation instructions and program disks are in Volume 2 of the NESS Program User's Guide.

An Examination of the Relationship between Professional Development Providers' Epistemological and Nature of Science Beliefs and Their Professional Development Programs

ERIC Educational Resources Information Center

Garcia Arriola, Alfonso

2017-01-01

In the last twenty years in US science education, professional development has emphasized the need to change science instruction from a direct instruction model to a more participatory and constructivist learning model. The result of these reform efforts has seen an increase in science education professional development that is focused on…

High level cognitive information processing in neural networks

NASA Technical Reports Server (NTRS)

Barnden, John A.; Fields, Christopher A.

1992-01-01

Two related research efforts were addressed: (1) high-level connectionist cognitive modeling; and (2) local neural circuit modeling. The goals of the first effort were to develop connectionist models of high-level cognitive processes such as problem solving or natural language understanding, and to understand the computational requirements of such models. The goals of the second effort were to develop biologically-realistic model of local neural circuits, and to understand the computational behavior of such models. In keeping with the nature of NASA's Innovative Research Program, all the work conducted under the grant was highly innovative. For instance, the following ideas, all summarized, are contributions to the study of connectionist/neural networks: (1) the temporal-winner-take-all, relative-position encoding, and pattern-similarity association techniques; (2) the importation of logical combinators into connection; (3) the use of analogy-based reasoning as a bridge across the gap between the traditional symbolic paradigm and the connectionist paradigm; and (4) the application of connectionism to the domain of belief representation/reasoning. The work on local neural circuit modeling also departs significantly from the work of related researchers. In particular, its concentration on low-level neural phenomena that could support high-level cognitive processing is unusual within the area of biological local circuit modeling, and also serves to expand the horizons of the artificial neural net field.

The impact of overstory density on reproduction establishment in the Missouri Ozarks: models for simulating regeneration stochastically

Treesearch

Lance A. Vickers; David R. Larsen; Daniel C. Dey; Benjamin O. Knapp; John M. Kabrick

2017-01-01

Predicting the effects of silvicultural choices on regeneration has been difficult with the tools available to foresters. In an effort to improve this, we developed a collection of reproduction establishment models based on stand development hypotheses and parameterized with empirical data for several species in the Missouri Ozarks. These models estimate third-year...

Development of a GIS interface for WEPP Model application to Great Lakes forested watersheds

Treesearch

J. R. Frankenberger; S. Dun; D. C. Flanagan; J. Q. Wu; W. J. Elliot

2011-01-01

This presentation will highlight efforts on development of a new online WEPP GIS interface, targeted toward application in forested regions bordering the Great Lakes. The key components and algorithms of the online GIS system will be outlined. The general procedures used to provide input to the WEPP model and to display model output will be demonstrated.

Target specific proteochemometric model development for BACE1 - protein flexibility and structural water are critical in virtual screening.

PubMed

Manoharan, Prabu; Chennoju, Kiranmai; Ghoshal, Nanda

2015-07-01

BACE1 is an attractive target in Alzheimer's disease (AD) treatment. A rational drug design effort for the inhibition of BACE1 is actively pursued by researchers in both academic and pharmaceutical industries. This continued effort led to the steady accumulation of BACE1 crystal structures, co-complexed with different classes of inhibitors. This wealth of information is used in this study to develop target specific proteochemometric models and these models are exploited for predicting the prospective BACE1 inhibitors. The models developed in this study have performed excellently in predicting the computationally generated poses, separately obtained from single and ensemble docking approaches. The simple protein-ligand contact (SPLC) model outperforms other sophisticated high end models, in virtual screening performance, developed during this study. In an attempt to account for BACE1 protein active site flexibility information in predictive models, we included the change in the area of solvent accessible surface and the change in the volume of solvent accessible surface in our models. The ensemble and single receptor docking results obtained from this study indicate that the structural water mediated interactions improve the virtual screening results. Also, these waters are essential for recapitulating bioactive conformation during docking study. The proteochemometric models developed in this study can be used for the prediction of BACE1 inhibitors, during the early stage of AD drug discovery.

Designing and Instructing Hybrid Open Learning Spaces Model to Support Lifelong Learning Engagement

ERIC Educational Resources Information Center

Crawford, Caroline M.

2016-01-01

With a focus upon open and lifelong learning understanding, the real world delineation between formalized higher education graduate school efforts and professional career position lines may be suggested as being blurred. This case study offers an analysis of one university instructor's efforts towards developing hybrid learning spaces that…

Does Satellite Television Program Satisfy Ethiopian Secondary School Students?

ERIC Educational Resources Information Center

Kim, Sung-Wan; Bogale, Gebeyehu

2014-01-01

The Ethiopian development plans have dealt with education sector as a key strategic pillar. There have been a lot of educational efforts. Especially to cope with lack of qualified teachers, lack of good teaching models, and remote rural regions separated from educational benefits, Ethiopian Ministry of Education has made efforts in utilizing…

Formulation and Application of the Generalized Multilevel Facets Model

ERIC Educational Resources Information Center

Wang, Wen-Chung; Liu, Chih-Yu

2007-01-01

In this study, the authors develop a generalized multilevel facets model, which is not only a multilevel and two-parameter generalization of the facets model, but also a multilevel and facet generalization of the generalized partial credit model. Because the new model is formulated within a framework of nonlinear mixed models, no efforts are…

Three-Dimensional Numerical Modeling of Magnetohydrodynamic Augmented Propulsion Experiment

NASA Technical Reports Server (NTRS)

Turner, M. W.; Hawk, C. W.; Litchford, R. J.

2009-01-01

Over the past several years, NASA Marshall Space Flight Center has engaged in the design and development of an experimental research facility to investigate the use of diagonalized crossed-field magnetohydrodynamic (MHD) accelerators as a possible thrust augmentation device for thermal propulsion systems. In support of this effort, a three-dimensional numerical MHD model has been developed for the purpose of analyzing and optimizing accelerator performance and to aid in understanding critical underlying physical processes and nonideal effects. This Technical Memorandum fully summarizes model development efforts and presents the results of pretest performance optimization analyses. These results indicate that the MHD accelerator should utilize a 45deg diagonalization angle with the applied current evenly distributed over the first five inlet electrode pairs. When powered at 100 A, this configuration is expected to yield a 50% global efficiency with an 80% increase in axial velocity and a 50% increase in centerline total pressure.

Update on ORNL TRANSFORM Tool: Simulating Multi-Module Advanced Reactor with End-to-End I&C

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hale, Richard Edward; Fugate, David L.; Cetiner, Sacit M.

2015-05-01

The Small Modular Reactor (SMR) Dynamic System Modeling Tool project is in the fourth year of development. The project is designed to support collaborative modeling and study of various advanced SMR (non-light water cooled reactor) concepts, including the use of multiple coupled reactors at a single site. The focus of this report is the development of a steam generator and drum system model that includes the complex dynamics of typical steam drum systems, the development of instrumentation and controls for the steam generator with drum system model, and the development of multi-reactor module models that reflect the full power reactormore » innovative small module design concept. The objective of the project is to provide a common simulation environment and baseline modeling resources to facilitate rapid development of dynamic advanced reactor models; ensure consistency among research products within the Instrumentation, Controls, and Human-Machine Interface technical area; and leverage cross-cutting capabilities while minimizing duplication of effort. The combined simulation environment and suite of models are identified as the TRANSFORM tool. The critical elements of this effort include (1) defining a standardized, common simulation environment that can be applied throughout the Advanced Reactors Technology program; (2) developing a library of baseline component modules that can be assembled into full plant models using available geometry, design, and thermal-hydraulic data; (3) defining modeling conventions for interconnecting component models; and (4) establishing user interfaces and support tools to facilitate simulation development (i.e., configuration and parameterization), execution, and results display and capture.« less

Design and Analysis Tools for Supersonic Inlets

NASA Technical Reports Server (NTRS)

Slater, John W.; Folk, Thomas C.

2009-01-01

Computational tools are being developed for the design and analysis of supersonic inlets. The objective is to update existing tools and provide design and low-order aerodynamic analysis capability for advanced inlet concepts. The Inlet Tools effort includes aspects of creating an electronic database of inlet design information, a document describing inlet design and analysis methods, a geometry model for describing the shape of inlets, and computer tools that implement the geometry model and methods. The geometry model has a set of basic inlet shapes that include pitot, two-dimensional, axisymmetric, and stream-traced inlet shapes. The inlet model divides the inlet flow field into parts that facilitate the design and analysis methods. The inlet geometry model constructs the inlet surfaces through the generation and transformation of planar entities based on key inlet design factors. Future efforts will focus on developing the inlet geometry model, the inlet design and analysis methods, a Fortran 95 code to implement the model and methods. Other computational platforms, such as Java, will also be explored.

Hypersonic Inflatable Aerodynamic Decelerator Ground Test Development

NASA Technical Reports Server (NTRS)

Del Corso, Jospeh A.; Hughes, Stephen; Cheatwood, Neil; Johnson, Keith; Calomino, Anthony

2015-01-01

Hypersonic Inflatable Aerodynamic Decelerator (HIAD) technology readiness levels have been incrementally matured by NASA over the last thirteen years, with most recent support from NASA's Space Technology Mission Directorate (STMD) Game Changing Development Program (GCDP). Recently STMD GCDP has authorized funding and support through fiscal year 2015 (FY15) for continued HIAD ground developments which support a Mars Entry, Descent, and Landing (EDL) study. The Mars study will assess the viability of various EDL architectures to enable a Mars human architecture pathfinder mission planned for mid-2020. At its conclusion in November 2014, NASA's first HIAD ground development effort had demonstrated success with fabricating a 50 W/cm2 modular thermal protection system, a 400 C capable inflatable structure, a 10-meter scale aeroshell manufacturing capability, together with calibrated thermal and structural models. Despite the unquestionable success of the first HIAD ground development effort, it was recognized that additional investment was needed in order to realize the full potential of the HIAD technology capability to enable future flight opportunities. The second HIAD ground development effort will focus on extending performance capability in key technology areas that include thermal protection system, lifting-body structures, inflation systems, flight control, stage transitions, and 15-meter aeroshell scalability. This paper presents an overview of the accomplishments under the baseline HIAD development effort and current plans for a follow-on development effort focused on extending those critical technologies needed to enable a Mars Pathfinder mission.

Remediation Evaluation Model for Chlorinated Solvents (REMChlor)

EPA Science Inventory

A new analytical solution has been developed for simulating the transient effects of groundwater source and plume remediation. This development was performed as part of a Strategic Environmental Research and Development Program (SERDP) research project, which was a joint effort ...

Evaluation of a Multi-Axial, Temperature, and Time Dependent (MATT) Failure Model

NASA Technical Reports Server (NTRS)

Richardson, D. E.; Anderson, G. L.; Macon, D. J.; Rudolphi, Michael (Technical Monitor)

2002-01-01

To obtain a better understanding the response of the structural adhesives used in the Space Shuttle's Reusable Solid Rocket Motor (RSRM) nozzle, an extensive effort has been conducted to characterize in detail the failure properties of these adhesives. This effort involved the development of a failure model that includes the effects of multi-axial loading, temperature, and time. An understanding of the effects of these parameters on the failure of the adhesive is crucial to the understanding and prediction of the safety of the RSRM nozzle. This paper documents the use of this newly developed multi-axial, temperature, and time (MATT) dependent failure model for modeling failure for the adhesives TIGA 321, EA913NA, and EA946. The development of the mathematical failure model using constant load rate normal and shear test data is presented. Verification of the accuracy of the failure model is shown through comparisons between predictions and measured creep and multi-axial failure data. The verification indicates that the failure model performs well for a wide range of conditions (loading, temperature, and time) for the three adhesives. The failure criterion is shown to be accurate through the glass transition for the adhesive EA946. Though this failure model has been developed and evaluated with adhesives, the concepts are applicable for other isotropic materials.

Component-specific modeling

NASA Technical Reports Server (NTRS)

Mcknight, R. L.

1985-01-01

Accomplishments are described for the second year effort of a 3-year program to develop methodology for component specific modeling of aircraft engine hot section components (turbine blades, turbine vanes, and burner liners). These accomplishments include: (1) engine thermodynamic and mission models; (2) geometry model generators; (3) remeshing; (4) specialty 3-D inelastic stuctural analysis; (5) computationally efficient solvers, (6) adaptive solution strategies; (7) engine performance parameters/component response variables decomposition and synthesis; (8) integrated software architecture and development, and (9) validation cases for software developed.

NASA GRC Stirling Technology Development Overview

NASA Technical Reports Server (NTRS)

Thieme, Lanny G.; Schreiber, Jeffrey G.

2003-01-01

The Department of Energy, Lockheed Martin (LM), Stirling Technology Company, and NASA Glenn Research Center (GRC) are developing a high-efficiency Stirling Radioisotope Generator (SRG) for potential NASA Space Science missions. The SRG is being developed for multimission use, including providing spacecraft onboard electric power for NASA deep space missions and power for unmanned Mars rovers. NASA GRC is conducting an in- house supporting technology project to assist in developing the Stirling convertor for space qualification and mission implementation. Preparations are underway for a thermalhacuum system demonstration and unattended operation during endurance testing of the 55-We Technology Demonstration Convertors. Heater head life assessment efforts continue, including verification of the heater head brazing and heat treatment schedules and evaluation of any potential regenerator oxidation. Long-term magnet aging tests are continuing to characterize any possible aging in the strength or demagnetization resistance of the permanent magnets used in the linear alternator. Testing of the magnet/lamination epoxy bond for performance and lifetime characteristics is now underway. These efforts are expected to provide key inputs as the system integrator, LM, begins system development of the SRG. GRC is also developing advanced technology for Stirling convertors. Cleveland State University (CSU) is progressing toward a multi-dimensional Stirling computational fluid dynamics code, capable of modeling complete convertors. Validation efforts at both CSU and the University of Minnesota are complementing the code development. New efforts have been started this year on a lightweight convertor, advanced controllers, high-temperature materials, and an end-to-end system dynamics model. Performance and mass improvement goals have been established for second- and third-generation Stirling radioisotope power systems.

MOEMS Modeling Using the Geometrical Matrix Toolbox

NASA Technical Reports Server (NTRS)

Wilson, William C.; Atkinson, Gary M.

2005-01-01

New technologies such as MicroOptoElectro-Mechanical Systems (MOEMS) require new modeling tools. These tools must simultaneously model the optical, electrical, and mechanical domains and the interactions between these domains. To facilitate rapid prototyping of these new technologies an optical toolbox has been developed for modeling MOEMS devices. The toolbox models are constructed using MATLAB's dynamical simulator, Simulink. Modeling toolboxes will allow users to focus their efforts on system design and analysis as opposed to developing component models. This toolbox was developed to facilitate rapid modeling and design of a MOEMS based laser ultrasonic receiver system.

Status of Computational Aerodynamic Modeling Tools for Aircraft Loss-of-Control

NASA Technical Reports Server (NTRS)

Frink, Neal T.; Murphy, Patrick C.; Atkins, Harold L.; Viken, Sally A.; Petrilli, Justin L.; Gopalarathnam, Ashok; Paul, Ryan C.

2016-01-01

A concerted effort has been underway over the past several years to evolve computational capabilities for modeling aircraft loss-of-control under the NASA Aviation Safety Program. A principal goal has been to develop reliable computational tools for predicting and analyzing the non-linear stability & control characteristics of aircraft near stall boundaries affecting safe flight, and for utilizing those predictions for creating augmented flight simulation models that improve pilot training. Pursuing such an ambitious task with limited resources required the forging of close collaborative relationships with a diverse body of computational aerodynamicists and flight simulation experts to leverage their respective research efforts into the creation of NASA tools to meet this goal. Considerable progress has been made and work remains to be done. This paper summarizes the status of the NASA effort to establish computational capabilities for modeling aircraft loss-of-control and offers recommendations for future work.

Engine Structural Analysis Software

NASA Technical Reports Server (NTRS)

McKnight, R. L.; Maffeo, R. J.; Schrantz, S.; Hartle, M. S.; Bechtel, G. S.; Lewis, K.; Ridgway, M.; Chamis, Christos C. (Technical Monitor)

2001-01-01

The report describes the technical effort to develop: (1) geometry recipes for nozzles, inlets, disks, frames, shafts, and ducts in finite element form, (2) component design tools for nozzles, inlets, disks, frames, shafts, and ducts which utilize the recipes and (3) an integrated design tool which combines the simulations of the nozzles, inlets, disks, frames, shafts, and ducts with the previously developed combustor, turbine blade, and turbine vane models for a total engine representation. These developments will be accomplished in cooperation and in conjunction with comparable efforts of NASA Glenn Research Center.

Stress analysis of the space telescope focal plane structure joint

NASA Technical Reports Server (NTRS)

Foster, W. A., Jr.; Shoemaker, W. L.

1985-01-01

Two major efforts were begun concerning the Space Telescope focal plane structure joint. The 3-D solid finite element modeling of the bipod flexure plate was carried out. Conceptual models were developed for the load transfer through the three major bolts to the flexure plate. The flexure plate drawings were reconstructed using DADAM for the purpose of developing a file from which the coordinates of any point on the flexure plate could be determined and also to locate the attachment points of the various components which connect with the flexure plate. For modeling convenience the CADAM drawing of the flexure plate has been divided into several regions which will be subdivided into finite elements using MSGMESH, which is a finite element mesh generator available with MSC/NASTRAN. In addition to the CADAM work on the flexure plate, an effort was also begun to develop computer aided drawings of the peripheral beam which will be used to assist in modeling the connection between it and the flexure plate.

Geometric-Optical Modeling of Directional Thermal Radiance for Improvement of Land Surface Temperature Retrievals from MODIS, ASTER, and Landsat-7 Instruments

NASA Technical Reports Server (NTRS)

Li, Xiaowen; Friedl, Mark; Strahler, Alan

2002-01-01

The general objectives of this project were to improve understanding of the directional emittance properties of land surfaces in the thermal infrared (TIR) region of the electro-magnetic spectrum. To accomplish these objectives our research emphasized a combination of theoretical model development and empirical studies designed to improve land surface temperature (LST) retrievals from space-borne remote sensing instruments. Following the proposal, the main tasks for this project were to: (1) Participate in field campaigns; (2) Acquire and process field, aircraft, and ancillary data; (3) Develop and refine models of LST emission; (4) Develop algorithms for LST retrieval; and (5) Explore LST retrieval methods for use in energy balance models. In general all of these objectives were addressed, and for the most part achieved. The main results from this project are described in the publications arising from this effort. We summarize our efforts related to each of the objectives.

Advanced 3D Characterization and Reconstruction of Reactor Materials FY16 Final Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fromm, Bradley; Hauch, Benjamin; Sridharan, Kumar

2016-12-01

A coordinated effort to link advanced materials characterization methods and computational modeling approaches is critical to future success for understanding and predicting the behavior of reactor materials that operate at extreme conditions. The difficulty and expense of working with nuclear materials have inhibited the use of modern characterization techniques on this class of materials. Likewise, mesoscale simulation efforts have been impeded due to insufficient experimental data necessary for initialization and validation of the computer models. The objective of this research is to develop methods to integrate advanced materials characterization techniques developed for reactor materials with state-of-the-art mesoscale modeling and simulationmore » tools. Research to develop broad-ion beam sample preparation, high-resolution electron backscatter diffraction, and digital microstructure reconstruction techniques; and methods for integration of these techniques into mesoscale modeling tools are detailed. Results for both irradiated and un-irradiated reactor materials are presented for FY14 - FY16 and final remarks are provided.« less

Evaluation and Strategic Planning for the GLOBE Program

NASA Astrophysics Data System (ADS)

Geary, E. E.; Williams, V. L.

2010-12-01

The Global Learning and Observations to Benefit the Environment (GLOBE) Program is an international environmental education program. It unites educators, students and scientists worldwide to collaborate on inquiry based investigations of the environment and Earth system science. Evaluation of the GLOBE program has been challenging because of its broad reach, diffuse models of implementation, and multiple stakeholders. In an effort to guide current evaluation efforts, a logic model was developed that provides a visual display of how the GLOBE program operates. Using standard elements of inputs, activities, outputs, customers and outcomes, this model describes how the program operates to achieve its goals. The template used to develop this particular logic model aligns the GLOBE program operations with its program strategy, thus ensuring that what the program is doing supports the achievement of long-term, intermediate and annual goals. It also provides a foundation for the development of key programmatic metrics that can be used to gauge progress toward the achievement of strategic goals.

COMMUNITY MULTISCALE AIR QUALITY MODELING SYSTEM (ONE ATMOSPHERE)

EPA Science Inventory

This task supports ORD's strategy by providing responsive technical support of EPA's mission and provides credible state of the art air quality models and guidance. This research effort is to develop and improve the Community Multiscale Air Quality (CMAQ) modeling system, a mu...

Dopamine, Effort-Based Choice, and Behavioral Economics: Basic and Translational Research

PubMed Central

Salamone, John D.; Correa, Merce; Yang, Jen-Hau; Rotolo, Renee; Presby, Rose

2018-01-01

Operant behavior is not only regulated by factors related to the quality or quantity of reinforcement, but also by the work requirements inherent in performing instrumental actions. Moreover, organisms often make effort-related decisions involving economic choices such as cost/benefit analyses. Effort-based decision making is studied using behavioral procedures that offer choices between high-effort options leading to relatively preferred reinforcers vs. low effort/low reward choices. Several neural systems, including the mesolimbic dopamine (DA) system and other brain circuits, are involved in regulating effort-related aspects of motivation. Considerable evidence indicates that mesolimbic DA transmission exerts a bi-directional control over exertion of effort on instrumental behavior tasks. Interference with DA transmission produces a low-effort bias in animals tested on effort-based choice tasks, while increasing DA transmission with drugs such as DA transport blockers tends to enhance selection of high-effort options. The results from these pharmacology studies are corroborated by the findings from recent articles using optogenetic, chemogenetic and physiological techniques. In addition to providing important information about the neural regulation of motivated behavior, effort-based choice tasks are useful for developing animal models of some of the motivational symptoms that are seen in people with various psychiatric and neurological disorders (e.g., depression, schizophrenia, Parkinson’s disease). Studies of effort-based decision making may ultimately contribute to the development of novel drug treatments for motivational dysfunction. PMID:29628879

Dopamine, Effort-Based Choice, and Behavioral Economics: Basic and Translational Research.

PubMed

Salamone, John D; Correa, Merce; Yang, Jen-Hau; Rotolo, Renee; Presby, Rose

2018-01-01

Operant behavior is not only regulated by factors related to the quality or quantity of reinforcement, but also by the work requirements inherent in performing instrumental actions. Moreover, organisms often make effort-related decisions involving economic choices such as cost/benefit analyses. Effort-based decision making is studied using behavioral procedures that offer choices between high-effort options leading to relatively preferred reinforcers vs. low effort/low reward choices. Several neural systems, including the mesolimbic dopamine (DA) system and other brain circuits, are involved in regulating effort-related aspects of motivation. Considerable evidence indicates that mesolimbic DA transmission exerts a bi-directional control over exertion of effort on instrumental behavior tasks. Interference with DA transmission produces a low-effort bias in animals tested on effort-based choice tasks, while increasing DA transmission with drugs such as DA transport blockers tends to enhance selection of high-effort options. The results from these pharmacology studies are corroborated by the findings from recent articles using optogenetic, chemogenetic and physiological techniques. In addition to providing important information about the neural regulation of motivated behavior, effort-based choice tasks are useful for developing animal models of some of the motivational symptoms that are seen in people with various psychiatric and neurological disorders (e.g., depression, schizophrenia, Parkinson's disease). Studies of effort-based decision making may ultimately contribute to the development of novel drug treatments for motivational dysfunction.

The Influence of Mitigation on Sage-Grouse Habitat Selection within an Energy Development Field

PubMed Central

Fedy, Bradley C.; Kirol, Christopher P.; Sutphin, Andrew L.; Maechtle, Thomas L.

2015-01-01

Growing global energy demands ensure the continued growth of energy development. Energy development in wildlife areas can significantly impact wildlife populations. Efforts to mitigate development impacts to wildlife are on-going, but the effectiveness of such efforts is seldom monitored or assessed. Greater sage-grouse (Centrocercus urophasianus) are sensitive to energy development and likely serve as an effective umbrella species for other sagebrush-steppe obligate wildlife. We assessed the response of birds within an energy development area before and after the implementation of mitigation action. Additionally, we quantified changes in habitat distribution and abundance in pre- and post-mitigation landscapes. Sage-grouse avoidance of energy development at large spatial scales is well documented. We limited our research to directly within an energy development field in order to assess the influence of mitigation in close proximity to energy infrastructure. We used nest-location data (n = 488) within an energy development field to develop habitat selection models using logistic regression on data from 4 years of research prior to mitigation and for 4 years following the implementation of extensive mitigation efforts (e.g., decreased activity, buried powerlines). The post-mitigation habitat selection models indicated less avoidance of wells (well density β = 0.18 ± 0.08) than the pre-mitigation models (well density β = -0.09 ± 0.11). However, birds still avoided areas of high well density and nests were not found in areas with greater than 4 wells per km2 and the majority of nests (63%) were located in areas with ≤ 1 well per km2. Several other model coefficients differed between the two time periods and indicated stronger selection for sagebrush (pre-mitigation β = 0.30 ± 0.09; post-mitigation β = 0.82 ± 0.08) and less avoidance of rugged terrain (pre-mitigation β = -0.35 ± 0.12; post-mitigation β = -0.05 ± 0.09). Mitigation efforts implemented may be responsible for the measurable improvement in sage-grouse nesting habitats within the development area. However, we cannot reject alternative hypotheses concerning the influence of population density and intraspecific competition. Additionally, we were unable to assess the actual fitness consequences of mitigation or the source-sink dynamics of the habitats. We compared the pre-mitigation and post-mitigation models predicted as maps with habitats ranked from low to high relative probability of use (equal-area bins: 1 – 5). We found more improvement in habitat rank between the two time periods around mitigated wells compared to non-mitigated wells. Informed mitigation within energy development fields could help improve habitats within the field. We recommend that any mitigation effort include well-informed plans to monitor the effectiveness of the implemented mitigation actions that assess both habitat use and relevant fitness parameters. PMID:25835296

Development of a pheromone elution rate physical model

Treesearch

M.E. Teske; H.W. Thistle; B.L. Strom; H. Zhu

2015-01-01

A first principle modeling approach has been applied to available data describing the elution of semiochemicals from pheromone dispensers. These data included field data for 27 products developed by several manufacturers, including homemade devices, as well as environmental chamber data collected on three semiochemical products. The goal of this effort was to...

Development of an acute oral toxicity dataset to facilitate assessment of existing QSARs and development of new models (WC10)

EPA Science Inventory

Acute oral toxicity data are used to meet both regulatory and non-regulatory needs. Recently, there have been efforts to explore alternative approaches for predicting acute oral toxicity such as QSARs. Evaluating the performance and scope of existing models and investigating the ...

Developmental Variables and Speech-Language in a Special Education Intervention Model.

ERIC Educational Resources Information Center

Cruz, Maria del C.; Ayala, Myrna

Case studies of eight children with speech and language impairments are presented in a review of the intervention efforts at the Demonstration Center for Preschool Special Education (DCPSE) in Puerto Rico. Five components of the intervention model are examined: social medical history, intelligence, motor development, socio-emotional development,…

Evaluation of CSM-CROPGRO-Cotton for simulating effects of management and climate change on cotton growth and evapotranspiration in an arid environment

USDA-ARS?s Scientific Manuscript database

Originally developed for simulating soybean growth and development, the CROPGRO model was recently re-parameterized for cotton. However, further efforts are necessary to evaluate the model's performance against field measurements for new environments and management options. The objective of this stu...

The EPA Online Database of Experimental and Predicted Data to Support Environmental Scientists (ACS Fall meeting)

EPA Science Inventory

As part of our efforts to develop a public platform to provide access to predictive models we have attempted to disentangle the influence of the quality versus quantity of data available to develop and validate QSAR models. Using a thorough manual review of the data underlying t...

Resources for National Water Savings for Outdoor Water Use

DOE Office of Scientific and Technical Information (OSTI.GOV)

Melody, Moya; Stratton, Hannah; Williams, Alison

2014-05-01

In support of efforts by the U.S. Environmental Agency's (EPA's) WaterSense program to develop a spreadsheet model for calculating the national water and financial savings attributable to WaterSense certification and labeling of weather-based irrigation controllers, Lawrence Berkeley National Laboratory reviewed reports, technical data, and other information related to outdoor water use and irrigation controllers. In this document we categorize and describe the reviewed references, highlighting pertinent data. We relied on these references when developing model parameters and calculating controller savings. We grouped resources into three major categories: landscapes (section 1); irrigation devices (section 2); and analytical and modeling efforts (sectionmore » 3). Each category is subdivided further as described in its section. References are listed in order of date of publication, most recent first.« less

Modeling and Managing the Risks of Measles and Rubella: A Global Perspective, Part I.

PubMed

Thompson, Kimberly M; Cochi, Stephen L

2016-07-01

Over the past 50 years, the use of vaccines led to significant decreases in the global burdens of measles and rubella, motivated at least in part by the successive development of global control and elimination targets. The Global Vaccine Action Plan (GVAP) includes specific targets for regional elimination of measles and rubella in five of six regions of the World Health Organization by 2020. Achieving the GVAP measles and rubella goals will require significant immunization efforts and associated financial investments and political commitments. Planning and budgeting for these efforts can benefit from learning some important lessons from the Global Polio Eradication Initiative (GPEI). Following an overview of the global context of measles and rubella risks and discussion of lessons learned from the GPEI, we introduce the contents of the special issue on modeling and managing the risks of measles and rubella. This introduction describes the synthesis of the literature available to support evidence-based model inputs to support the development of an integrated economic and dynamic disease transmission model to support global efforts to optimally manage these diseases globally using vaccines. © 2016 Society for Risk Analysis.

Toward a VPH/Physiome ToolKit.

PubMed

Garny, Alan; Cooper, Jonathan; Hunter, Peter J

2010-01-01

The Physiome Project was officially launched in 1997 and has since brought together teams from around the world to work on the development of a computational framework for the modeling of the human body. At the European level, this effort is focused around patient-specific solutions and is known as the Virtual Physiological Human (VPH) Initiative.Such modeling is both multiscale (in space and time) and multiphysics. This, therefore, requires careful interaction and collaboration between the teams involved in the VPH/Physiome effort, if we are to produce computer models that are not only quantitative, but also integrative and predictive.In that context, several technologies and solutions are already available, developed both by groups involved in the VPH/Physiome effort, and by others. They address areas such as data handling/fusion, markup languages, model repositories, ontologies, tools (for simulation, imaging, data fitting, etc.), as well as grid, middleware, and workflow.Here, we provide an overview of resources that should be considered for inclusion in the VPH/Physiome ToolKit (i.e., the set of tools that addresses the needs and requirements of the Physiome Project and VPH Initiative) and discuss some of the challenges that we are still facing.

A study on nonlinear estimation of submaximal effort tolerance based on the generalized MET concept and the 6MWT in pulmonary rehabilitation

PubMed Central

Szczegielniak, Jan; Łuniewski, Jacek; Stanisławski, Rafał; Bogacz, Katarzyna; Krajczy, Marcin; Rydel, Marek

2018-01-01

Background The six-minute walk test (6MWT) is considered to be a simple and inexpensive tool for the assessment of functional tolerance of submaximal effort. The aim of this work was 1) to background the nonlinear nature of the energy expenditure process due to physical activity, 2) to compare the results/scores of the submaximal treadmill exercise test and those of 6MWT in pulmonary patients and 3) to develop nonlinear mathematical models relating the two. Methods The study group included patients with the COPD. All patients were subjected to a submaximal exercise test and a 6MWT. To develop an optimal mathematical solution and compare the results of the exercise test and the 6MWT, the least squares and genetic algorithms were employed to estimate parameters of polynomial expansion and piecewise linear models. Results Mathematical analysis enabled to construct nonlinear models for estimating the MET result of submaximal exercise test based on average walk velocity (or distance) in the 6MWT. Conclusions Submaximal effort tolerance in COPD patients can be effectively estimated from new, rehabilitation-oriented, nonlinear models based on the generalized MET concept and the 6MWT. PMID:29425213

Incorporating phosphorus cycling into global modeling efforts: a worthwhile, tractable endeavor

USGS Publications Warehouse

Reed, Sasha C.; Yang, Xiaojuan; Thornton, Peter E.

2015-01-01

Myriad field, laboratory, and modeling studies show that nutrient availability plays a fundamental role in regulating CO2 exchange between the Earth's biosphere and atmosphere, and in determining how carbon pools and fluxes respond to climatic change. Accordingly, global models that incorporate coupled climate–carbon cycle feedbacks made a significant advance with the introduction of a prognostic nitrogen cycle. Here we propose that incorporating phosphorus cycling represents an important next step in coupled climate–carbon cycling model development, particularly for lowland tropical forests where phosphorus availability is often presumed to limit primary production. We highlight challenges to including phosphorus in modeling efforts and provide suggestions for how to move forward.

On the design of script languages for neural simulation.

PubMed

Brette, Romain

2012-01-01

In neural network simulators, models are specified according to a language, either specific or based on a general programming language (e.g. Python). There are also ongoing efforts to develop standardized languages, for example NeuroML. When designing these languages, efforts are often focused on expressivity, that is, on maximizing the number of model types than can be described and simulated. I argue that a complementary goal should be to minimize the cognitive effort required on the part of the user to use the language. I try to formalize this notion with the concept of "language entropy", and I propose a few practical guidelines to minimize the entropy of languages for neural simulation.

Computational electronics and electromagnetics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Shang, C C

The Computational Electronics and Electromagnetics thrust area serves as the focal point for Engineering R and D activities for developing computer-based design and analysis tools. Representative applications include design of particle accelerator cells and beamline components; design of transmission line components; engineering analysis and design of high-power (optical and microwave) components; photonics and optoelectronics circuit design; electromagnetic susceptibility analysis; and antenna synthesis. The FY-97 effort focuses on development and validation of (1) accelerator design codes; (2) 3-D massively parallel, time-dependent EM codes; (3) material models; (4) coupling and application of engineering tools for analysis and design of high-power components; andmore » (5) development of beam control algorithms coupled to beam transport physics codes. These efforts are in association with technology development in the power conversion, nondestructive evaluation, and microtechnology areas. The efforts complement technology development in Lawrence Livermore National programs.« less

Community-wide validation of geospace model local K-index predictions to support model transition to operations

NASA Astrophysics Data System (ADS)

Glocer, A.; Rastätter, L.; Kuznetsova, M.; Pulkkinen, A.; Singer, H. J.; Balch, C.; Weimer, D.; Welling, D.; Wiltberger, M.; Raeder, J.; Weigel, R. S.; McCollough, J.; Wing, S.

2016-07-01

We present the latest result of a community-wide space weather model validation effort coordinated among the Community Coordinated Modeling Center (CCMC), NOAA Space Weather Prediction Center (SWPC), model developers, and the broader science community. Validation of geospace models is a critical activity for both building confidence in the science results produced by the models and in assessing the suitability of the models for transition to operations. Indeed, a primary motivation of this work is supporting NOAA/SWPC's effort to select a model or models to be transitioned into operations. Our validation efforts focus on the ability of the models to reproduce a regional index of geomagnetic disturbance, the local K-index. Our analysis includes six events representing a range of geomagnetic activity conditions and six geomagnetic observatories representing midlatitude and high-latitude locations. Contingency tables, skill scores, and distribution metrics are used for the quantitative analysis of model performance. We consider model performance on an event-by-event basis, aggregated over events, at specific station locations, and separated into high-latitude and midlatitude domains. A summary of results is presented in this report, and an online tool for detailed analysis is available at the CCMC.

Community-Wide Validation of Geospace Model Local K-Index Predictions to Support Model Transition to Operations

NASA Technical Reports Server (NTRS)

Glocer, A.; Rastaetter, L.; Kuznetsova, M.; Pulkkinen, A.; Singer, H. J.; Balch, C.; Weimer, D.; Welling, D.; Wiltberger, M.; Raeder, J.;

Responses to Interpersonal Stress: Normative Changes Across Childhood and the Impact of Peer Victimization.

PubMed

Troop-Gordon, Wendy; Sugimura, Niwako; Rudolph, Karen D

2017-03-01

This research examined the development of stress responses across second to sixth grades and whether exposure to peer victimization alters stress response trajectories. Youth (338 girls; 298 boys; M age  = 7.97 years, SD = .37) reported on stress responses; teachers and youth reported on peer victimization. Latent growth curve modeling revealed an increase in effortful engagement responses and a decrease in disengagement and involuntary engagement responses during this period. Peer victimization disrupted these normative trajectories, resulting in less effortful engagement and more effortful disengagement and involuntary stress responses in early adolescence. These findings suggest that early peer victimization sensitizes youth to stress by interfering with the development of effective coping and fostering maladaptive stress responses. © 2016 The Authors. Child Development © 2016 Society for Research in Child Development, Inc.

HARMONIZATION AND COMMUNICATION OF PBPK MODELS USING THE EXPOSURE RELATED DOSE ESTIMATION MODEL (ERDEM) SYSTEM: TRICHLOROETHYLENE

EPA Science Inventory

In support of the trichloroethylene (TCE) risk assessment for the Office of Air and Radiation, Office of Solid Waste and Emergency Response, and Office of Water, NERL and NCEA are developing an updated physiologically-based pharmacokinetic (PBPK) model. The PBPK modeling effort ...

Crash prediction modeling for curved segments of rural two-lane two-way highways in Utah.

DOT National Transportation Integrated Search

2015-10-01

This report contains the results of the development of crash prediction models for curved segments of rural : two-lane two-way highways in the state of Utah. The modeling effort included the calibration of the predictive : model found in the Highway ...

Natural hazard modeling and uncertainty analysis [Chapter 2

Treesearch

Matthew Thompson; Jord J. Warmink

2017-01-01

Modeling can play a critical role in assessing and mitigating risks posed by natural hazards. These modeling efforts generally aim to characterize the occurrence, intensity, and potential consequences of natural hazards. Uncertainties surrounding the modeling process can have important implications for the development, application, evaluation, and interpretation of...

Development of a rotorcraft. Propulsion dynamics interface analysis, volume 2

NASA Technical Reports Server (NTRS)

Hull, R.

1982-01-01

A study was conducted to establish a coupled rotor/propulsion analysis that would be applicable to a wide range of rotorcraft systems. The effort included the following tasks: (1) development of a model structure suitable for simulating a wide range of rotorcraft configurations; (2) defined a methodology for parameterizing the model structure to represent a particular rotorcraft; (3) constructing a nonlinear coupled rotor/propulsion model as a test case to use in analyzing coupled system dynamics; and (4) an attempt to develop a mostly linear coupled model derived from the complete nonlinear simulations. Documentation of the computer models developed is presented.

T-R Cycle Characterization and Imaging: Advanced Diagnostic Methodology for Petroleum Reservoir and Trap Detection and Delineation

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ernest A. Mancini; William C. Parcell; Bruce S. Hart

The principal research effort for Year 2 of the project is on stratigraphic model assessment and development. The research focus for the first six (6) months of Year 2 is on T-R cycle model development. The emphasis for the remainder of the year is on assessing the depositional model and developing and testing a sequence stratigraphy model. The development and testing of the sequence stratigraphy model has been accomplished through integrated outcrop, well log and seismic studies of Mesozoic strata in the Gulf of Mexico, North Atlantic and Rocky Mountain areas.

Model Driven Engineering

NASA Astrophysics Data System (ADS)

Gaševic, Dragan; Djuric, Dragan; Devedžic, Vladan

A relevant initiative from the software engineering community called Model Driven Engineering (MDE) is being developed in parallel with the Semantic Web (Mellor et al. 2003a). The MDE approach to software development suggests that one should first develop a model of the system under study, which is then transformed into the real thing (i.e., an executable software entity). The most important research initiative in this area is the Model Driven Architecture (MDA), which is Model Driven Architecture being developed under the umbrella of the Object Management Group (OMG). This chapter describes the basic concepts of this software engineering effort.

A Model of Auditory-Cognitive Processing and Relevance to Clinical Applicability.

PubMed

Edwards, Brent

2016-01-01

Hearing loss and cognitive function interact in both a bottom-up and top-down relationship. Listening effort is tied to these interactions, and models have been developed to explain their relationship. The Ease of Language Understanding model in particular has gained considerable attention in its explanation of the effect of signal distortion on speech understanding. Signal distortion can also affect auditory scene analysis ability, however, resulting in a distorted auditory scene that can affect cognitive function, listening effort, and the allocation of cognitive resources. These effects are explained through an addition to the Ease of Language Understanding model. This model can be generalized to apply to all sounds, not only speech, representing the increased effort required for auditory environmental awareness and other nonspeech auditory tasks. While the authors have measures of speech understanding and cognitive load to quantify these interactions, they are lacking measures of the effect of hearing aid technology on auditory scene analysis ability and how effort and attention varies with the quality of an auditory scene. Additionally, the clinical relevance of hearing aid technology on cognitive function and the application of cognitive measures in hearing aid fittings will be limited until effectiveness is demonstrated in real-world situations.

Recent Developments in Toxico-Cheminformatics: A New ...

EPA Pesticide Factsheets

Efforts to improve public access to chemical toxicity information resources, coupled with new high-throughput screening (HTS) data and efforts to systematize legacy toxicity studies, have the potential to significantly improve predictive capabilities in toxicology. Important recent developments include: 1) large and growing public resources that link chemical structures to biological activity and toxicity data in searchable format, and that offer more nuanced and varied representations of activity; 2) standardized relational data models that capture relevant details of chemical treatment and effects of published in vivo experiments; and 3) the generation of large amounts of new data from public efforts that are employing HTS technologies to probe a wide range of bioactivity and cellular processes across large swaths of chemical space. Most recently, EPA’s DSSTox project has published several new EPA chemical data inventories (IRIS, HPV, ToxCast) and added an on-line capability for structure (substructure or similarity)-searching through all or parts of the published DSSTox data files. These efforts are, for the first time in many cases, opening up a structure-paved two-way highway between previously inaccessible or isolated public chemical data repositories and large public resources, such as PubChem. In addition, public initiatives (such as ToxML) are developing systematized data models of toxicity study areas, and introducing standardized templates, contr

A study of fault prediction and reliability assessment in the SEL environment

NASA Technical Reports Server (NTRS)

Basili, Victor R.; Patnaik, Debabrata

1986-01-01

An empirical study on estimation and prediction of faults, prediction of fault detection and correction effort, and reliability assessment in the Software Engineering Laboratory environment (SEL) is presented. Fault estimation using empirical relationships and fault prediction using curve fitting method are investigated. Relationships between debugging efforts (fault detection and correction effort) in different test phases are provided, in order to make an early estimate of future debugging effort. This study concludes with the fault analysis, application of a reliability model, and analysis of a normalized metric for reliability assessment and reliability monitoring during development of software.

Hydrological processes and model representation: impact of soft data on calibration

Treesearch

J.G. Arnold; M.A. Youssef; H. Yen; M.J. White; A.Y. Sheshukov; A.M. Sadeghi; D.N. Moriasi; J.L. Steiner; Devendra Amatya; R.W. Skaggs; E.B. Haney; J. Jeong; M. Arabi; P.H. Gowda

2015-01-01

Hydrologic and water quality models are increasingly used to determine the environmental impacts of climate variability and land management. Due to differing model objectives and differences in monitored data, there are currently no universally accepted procedures for model calibration and validation in the literature. In an effort to develop accepted model calibration...

Dynamic Modeling of Solar Dynamic Components and Systems

NASA Technical Reports Server (NTRS)

Hochstein, John I.; Korakianitis, T.

1992-01-01

The purpose of this grant was to support NASA in modeling efforts to predict the transient dynamic and thermodynamic response of the space station solar dynamic power generation system. In order to meet the initial schedule requirement of providing results in time to support installation of the system as part of the initial phase of space station, early efforts were executed with alacrity and often in parallel. Initially, methods to predict the transient response of a Rankine as well as a Brayton cycle were developed. Review of preliminary design concepts led NASA to select a regenerative gas-turbine cycle using a helium-xenon mixture as the working fluid and, from that point forward, the modeling effort focused exclusively on that system. Although initial project planning called for a three year period of performance, revised NASA schedules moved system installation to later and later phases of station deployment. Eventually, NASA selected to halt development of the solar dynamic power generation system for space station and to reduce support for this project to two-thirds of the original level.

Wall-to-wall Landsat TM classifications for Georgia in support of SAFIS using FIA plots for training and verification

Treesearch

William H. Cooke; Andrew J. Hartsell

2000-01-01

Wall-to-wall Landsat TM classification efforts in Georgia require field validation. Validation uslng FIA data was testing by developing a new crown modeling procedure. A methodology is under development at the Southern Research Station to model crown diameter using Forest Health monitoring data. These models are used to simulate the proportion of tree crowns that...

Transboundary impacts on regional ground water modeling in Texas

USGS Publications Warehouse

Rainwater, K.; Stovall, J.; Frailey, S.; Urban, L.

2005-01-01

Recent legislation required regional grassroots water resources planning across the entire state of Texas. The Texas Water Development Board (TWDB), the state's primary water resource planning agency, divided the state into 16 planning regions. Each planning group developed plans to manage both ground water and surface water sources and to meet future demands of various combinations of domestic, agricultural, municipal, and industrial water consumers. This presentation describes the challenges in developing a ground water model for the Llano Estacado Regional Water Planning Group (LERWPG), whose region includes 21 counties in the Southern High Plains of Texas. While surface water is supplied to several cities in this region, the vast majority of the regional water use comes from the High Plains aquifer system, often locally referred to as the Ogallala Aquifer. Over 95% of the ground water demand is for irrigated agriculture. The LERWPG had to predict the impact of future TWDB-projected water demands, as provided by the TWDB, on the aquifer for the period 2000 to 2050. If detrimental impacts were noted, alternative management strategies must be proposed. While much effort was spent on evaluating the current status of the ground water reserves, an appropriate numerical model of the aquifer system was necessary to demonstrate future impacts of the predicted withdrawals as well as the effects of the alternative strategies. The modeling effort was completed in the summer of 2000. This presentation concentrates on the political, scientific, and nontechnical issues in this planning process that complicated the modeling effort. Uncertainties in data, most significantly in distribution and intensity of recharge and withdrawals, significantly impacted the calibration and predictive modeling efforts. Four predictive scenarios, including baseline projections, recurrence of the drought of record, precipitation enhancement, and reduced irrigation demand, were simulated to identify counties at risk of low final ground water storage volume or low levels of satisfied demand by 2050. Copyright ?? 2005 National Ground Water Association.

A framework for identifying public research priorities: an application in forestry research.

Treesearch

Glenn Fox

1986-01-01

Discusses attempts to model and measure the relationship between research and development activity and the rate and nature of technological change in recent decades. Reviews efforts to model optimal research resource allocation, and presents a model for southern pine forestry research.

Model Calibration Efforts for the International Space Station's Solar Array Mast

NASA Technical Reports Server (NTRS)

Elliott, Kenny B.; Horta, Lucas G.; Templeton, Justin D.; Knight, Norman F., Jr.

2012-01-01

The International Space Station (ISS) relies on sixteen solar-voltaic blankets to provide electrical power to the station. Each pair of blankets is supported by a deployable boom called the Folding Articulated Square Truss Mast (FAST Mast). At certain ISS attitudes, the solar arrays can be positioned in such a way that shadowing of either one or three longerons causes an unexpected asymmetric thermal loading that if unchecked can exceed the operational stability limits of the mast. Work in this paper documents part of an independent NASA Engineering and Safety Center effort to assess the existing operational limits. Because of the complexity of the system, the problem is being worked using a building-block progression from components (longerons), to units (single or multiple bays), to assembly (full mast). The paper presents results from efforts to calibrate the longeron components. The work includes experimental testing of two types of longerons (straight and tapered), development of Finite Element (FE) models, development of parameter uncertainty models, and the establishment of a calibration and validation process to demonstrate adequacy of the models. Models in the context of this paper refer to both FE model and probabilistic parameter models. Results from model calibration of the straight longerons show that the model is capable of predicting the mean load, axial strain, and bending strain. For validation, parameter values obtained from calibration of straight longerons are used to validate experimental results for the tapered longerons.

Efforts to integrate CMIP metadata and standards into NOAA-GFDL's climate model workflow

NASA Astrophysics Data System (ADS)

Blanton, C.; Lee, M.; Mason, E. E.; Radhakrishnan, A.

2017-12-01

Modeling centers participating in CMIP6 run model simulations, publish requested model output (conforming to community data standards), and document models and simulations using ES-DOC. GFDL developed workflow software implementing some best practices to meet these metadata and documentation requirements. The CMIP6 Data Request defines the variables that should be archived for each experiment and specifies their spatial and temporal structure. We used the Data Request's dreqPy python library to write GFDL model configuration files as an alternative to hand-crafted tables. There was also a largely successful effort to standardize variable names within the model to reduce the additional overhead of translating "GFDL to CMOR" variables at a later stage in the pipeline. The ES-DOC ecosystem provides tools and standards to create, publish, and view various types of community-defined CIM documents, most notably model and simulation documents. Although ES-DOC will automatically create simulation documents during publishing by harvesting NetCDF global attributes, the information must be collected, stored, and placed in the NetCDF files by the workflow. We propose to develop a GUI to collect the simulation document precursors. In addition, a new MIP for CMIP6-CPMIP, a comparison of computational performance of climate models-is documented using machine and performance CIM documents. We used ES-DOC's pyesdoc python library to automatically create these machine and performance documents. We hope that these and similar efforts will become permanent features of the GFDL workflow to facilitate future participation in CMIP-like activities.

Developing ADHD in preschool: Testing the dual pathway model of temperament.

PubMed

Kerner Auch Koerner, Julia; Gust, Nicole; Petermann, Franz

2017-07-14

The dual pathway model of Attention Deficit Hyperactivity Disorder (ADHD) suggests that effortful control and positive approach, or surgency, are independent pathways leading to ADHD. This model has been proven on the basis of temperament in school children, however not in preschool children. In this study we tested whether the dual pathway model of ADHD can be replicated in preschool children using temperamental measures. One hundred and nineteen children (59 girls, M-age = 4.97 years, SD = 0.96) participated in a study. Parents rated temperament on the Child Behavior Questionnaire (CBQ) and parents and teachers rated ADHD symptoms (SDQ). We found that effortful control and surgency independently predicted preschool ADHD symptoms but there were no moderations or mediations. Our findings support the dual pathway model of temperament but not compensatory models of ADHD. Ratings of temperament might be an important predictor of which child is at risk to develop clinical ADHD later on and therefore an important part of prevention.

Coupling the System Analysis Module with SAS4A/SASSYS-1

DOE Office of Scientific and Technical Information (OSTI.GOV)

Fanning, T. H.; Hu, R.

2016-09-30

SAS4A/SASSYS-1 is a simulation tool used to perform deterministic analysis of anticipated events as well as design basis and beyond design basis accidents for advanced reactors, with an emphasis on sodium fast reactors. SAS4A/SASSYS-1 has been under development and in active use for nearly forty-five years, and is currently maintained by the U.S. Department of Energy under the Office of Advanced Reactor Technology. Although SAS4A/SASSYS-1 contains a very capable primary and intermediate system modeling component, PRIMAR-4, it also has some shortcomings: outdated data management and code structure makes extension of the PRIMAR-4 module somewhat difficult. The user input format formore » PRIMAR-4 also limits the number of volumes and segments that can be used to describe a given system. The System Analysis Module (SAM) is a fairly new code development effort being carried out under the U.S. DOE Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. SAM is being developed with advanced physical models, numerical methods, and software engineering practices; however, it is currently somewhat limited in the system components and phenomena that can be represented. For example, component models for electromagnetic pumps and multi-layer stratified volumes have not yet been developed. Nor is there support for a balance of plant model. Similarly, system-level phenomena such as control-rod driveline expansion and vessel elongation are not represented. This report documents fiscal year 2016 work that was carried out to couple the transient safety analysis capabilities of SAS4A/SASSYS-1 with the system modeling capabilities of SAM under the joint support of the ART and NEAMS programs. The coupling effort was successful and is demonstrated by evaluating an unprotected loss of flow transient for the Advanced Burner Test Reactor (ABTR) design. There are differences between the stand-alone SAS4A/SASSYS-1 simulations and the coupled SAS/SAM simulations, but these are mainly attributed to the limited maturity of the SAM development effort. The severe accident modeling capabilities in SAS4A/SASSYS-1 (sodium boiling, fuel melting and relocation) will continue to play a vital role for a long time. Therefore, the SAS4A/SASSYS-1 modernization effort should remain a high priority task under the ART program to ensure continued participation in domestic and international SFR safety collaborations and design optimizations. On the other hand, SAM provides an advanced system analysis tool, with improved numerical solution schemes, data management, code flexibility, and accuracy. SAM is still in early stages of development and will require continued support from NEAMS to fulfill its potential and to mature into a production tool for advanced reactor safety analysis. The effort to couple SAS4A/SASSYS-1 and SAM is the first step on the integration of these modeling capabilities.« less

Modeling nanomaterial environmental fate in aquatic systems.

PubMed

Dale, Amy L; Casman, Elizabeth A; Lowry, Gregory V; Lead, Jamie R; Viparelli, Enrica; Baalousha, Mohammed

2015-03-03

Mathematical models improve our fundamental understanding of the environmental behavior, fate, and transport of engineered nanomaterials (NMs, chemical substances or materials roughly 1-100 nm in size) and facilitate risk assessment and management activities. Although today's large-scale environmental fate models for NMs are a considerable improvement over early efforts, a gap still remains between the experimental research performed to date on the environmental fate of NMs and its incorporation into models. This article provides an introduction to the current state of the science in modeling the fate and behavior of NMs in aquatic environments. We address the strengths and weaknesses of existing fate models, identify the challenges facing researchers in developing and validating these models, and offer a perspective on how these challenges can be addressed through the combined efforts of modelers and experimentalists.

Model building techniques for analysis.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Walther, Howard P.; McDaniel, Karen Lynn; Keener, Donald

2009-09-01

The practice of mechanical engineering for product development has evolved into a complex activity that requires a team of specialists for success. Sandia National Laboratories (SNL) has product engineers, mechanical designers, design engineers, manufacturing engineers, mechanical analysts and experimentalists, qualification engineers, and others that contribute through product realization teams to develop new mechanical hardware. The goal of SNL's Design Group is to change product development by enabling design teams to collaborate within a virtual model-based environment whereby analysis is used to guide design decisions. Computer-aided design (CAD) models using PTC's Pro/ENGINEER software tools are heavily relied upon in the productmore » definition stage of parts and assemblies at SNL. The three-dimensional CAD solid model acts as the design solid model that is filled with all of the detailed design definition needed to manufacture the parts. Analysis is an important part of the product development process. The CAD design solid model (DSM) is the foundation for the creation of the analysis solid model (ASM). Creating an ASM from the DSM currently is a time-consuming effort; the turnaround time for results of a design needs to be decreased to have an impact on the overall product development. This effort can be decreased immensely through simple Pro/ENGINEER modeling techniques that summarize to the method features are created in a part model. This document contains recommended modeling techniques that increase the efficiency of the creation of the ASM from the DSM.« less

Validation of PV-RPM Code in the System Advisor Model.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Klise, Geoffrey Taylor; Lavrova, Olga; Freeman, Janine

2017-04-01

This paper describes efforts made by Sandia National Laboratories (SNL) and the National Renewable Energy Laboratory (NREL) to validate the SNL developed PV Reliability Performance Model (PV - RPM) algorithm as implemented in the NREL System Advisor Model (SAM). The PV - RPM model is a library of functions that estimates component failure and repair in a photovoltaic system over a desired simulation period. The failure and repair distributions in this paper are probabilistic representations of component failure and repair based on data collected by SNL for a PV power plant operating in Arizona. The validation effort focuses on whethermore » the failure and repair dist ributions used in the SAM implementation result in estimated failures that match the expected failures developed in the proof - of - concept implementation. Results indicate that the SAM implementation of PV - RPM provides the same results as the proof - of - concep t implementation, indicating the algorithms were reproduced successfully.« less

Cost-engineering modeling to support rapid concept development of an advanced infrared satellite system

NASA Astrophysics Data System (ADS)

Bell, Kevin D.; Dafesh, Philip A.; Hsu, L. A.; Tsuda, A. S.

1995-12-01

Current architectural and design trade techniques often carry unaffordable alternatives late into the decision process. Early decisions made during the concept exploration and development (CE&D) phase will drive the cost of a program more than any other phase of development; thus, designers must be able to assess both the performance and cost impacts of their early choices. The Space Based Infrared System (SBIRS) cost engineering model (CEM) described in this paper is an end-to-end process integrating engineering and cost expertise through commonly available spreadsheet software, allowing for concurrent design engineering and cost estimation to identify and balance system drives to reduce acquisition costs. The automated interconnectivity between subsystem models using spreadsheet software allows for the quick and consistent assessment of the system design impacts and relative cost impacts due to requirement changes. It is different from most CEM efforts attempted in the past as it incorporates more detailed spacecraft and sensor payload models, and has been applied to determine the cost drivers for an advanced infrared satellite system acquisition. The CEM is comprised of integrated detailed engineering and cost estimating relationships describing performance, design, and cost parameters. Detailed models have been developed to evaluate design parameters for the spacecraft bus and sensor; both step-starer and scanner sensor types incorporate models of focal plane array, optics, processing, thermal, communications, and mission performance. The current CEM effort has provided visibility to requirements, design, and cost drivers for system architects and decision makers to determine the configuration of an infrared satellite architecture that meets essential requirements cost effectively. In general, the methodology described in this paper consists of process building blocks that can be tailored to the needs of many applications. Descriptions of the spacecraft and payload subsystem models provide insight into The Aerospace Corporation expertise and scope of the SBIRS concept development effort.

Collaborative Project: The problem of bias in defining uncertainty in computationally enabled strategies for data-driven climate model development. Final Technical Report.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Huerta, Gabriel

The objective of the project is to develop strategies for better representing scientific sensibilities within statistical measures of model skill that then can be used within a Bayesian statistical framework for data-driven climate model development and improved measures of model scientific uncertainty. One of the thorny issues in model evaluation is quantifying the effect of biases on climate projections. While any bias is not desirable, only those biases that affect feedbacks affect scatter in climate projections. The effort at the University of Texas is to analyze previously calculated ensembles of CAM3.1 with perturbed parameters to discover how biases affect projectionsmore » of global warming. The hypothesis is that compensating errors in the control model can be identified by their effect on a combination of processes and that developing metrics that are sensitive to dependencies among state variables would provide a way to select version of climate models that may reduce scatter in climate projections. Gabriel Huerta at the University of New Mexico is responsible for developing statistical methods for evaluating these field dependencies. The UT effort will incorporate these developments into MECS, which is a set of python scripts being developed at the University of Texas for managing the workflow associated with data-driven climate model development over HPC resources. This report reflects the main activities at the University of New Mexico where the PI (Huerta) and the Postdocs (Nosedal, Hattab and Karki) worked on the project.« less

CrossTalk. The Journal of Defense Software Engineering. Volume 23, Number 6, Nov/Dec 2010

DTIC Science & Technology

2010-11-01

Model of archi- tectural design. It guides developers to apply effort to their software architecture commensurate with the risks faced by...Driven Model is the promotion of risk to prominence. It is possible to apply the Risk-Driven Model to essentially any software development process...succeed without any planned architecture work, while many high-risk projects would fail without it . The Risk-Driven Model walks a middle path

A model to inform management actions as a response to chytridiomycosis-associated decline

USGS Publications Warehouse

Converse, Sarah J.; Bailey, Larissa L.; Mosher, Brittany A.; Funk, W. Chris; Gerber, Brian D.; Muths, Erin L.

2017-01-01

Decision-analytic models provide forecasts of how systems of interest will respond to management. These models can be parameterized using empirical data, but sometimes require information elicited from experts. When evaluating the effects of disease in species translocation programs, expert judgment is likely to play a role because complete empirical information will rarely be available. We illustrate development of a decision-analytic model built to inform decision-making regarding translocations and other management actions for the boreal toad (Anaxyrus boreas boreas), a species with declines linked to chytridiomycosis caused by Batrachochytrium dendrobatidis (Bd). Using the model, we explored the management implications of major uncertainties in this system, including whether there is a genetic basis for resistance to pathogenic infection by Bd, how translocation can best be implemented, and the effectiveness of efforts to reduce the spread of Bd. Our modeling exercise suggested that while selection for resistance to pathogenic infectionDecision-analytic models provide forecasts of how systems of interest will respond to management. These models can be parameterized using empirical data, but sometimes require information elicited from experts. When evaluating the effects of disease in species translocation programs, expert judgment is likely to play a role because complete empirical information will rarely be available. We illustrate development of a decision-analytic model built to inform decision-making regarding translocations and other management actions for the boreal toad (Anaxyrus boreas boreas), a species with declines linked to chytridiomycosis caused by Batrachochytrium dendrobatidis (Bd). Using the model, we explored the management implications of major uncertainties in this system, including whether there is a genetic basis for resistance to pathogenic infection by Bd, how translocation can best be implemented, and the effectiveness of efforts to reduce the spread of Bd. Our modeling exercise suggested that while selection for resistance to pathogenic infection by Bd could increase numbers of sites occupied by toads, and translocations could increase the rate of toad recovery, efforts to reduce the spread of Bd may have little effect. We emphasize the need to continue developing and parameterizing models necessary to assess management actions for combating chytridiomycosis-associated declines. by Bd could increase numbers of sites occupied by toads, and translocations could increase the rate of toad recovery, efforts to reduce the spread of Bd may have little effect. We emphasize the need to continue developing and parameterizing models necessary to assess management actions for combating chytridiomycosis-associated declines.

Space Station communications and tracking systems modeling and RF link simulation

NASA Technical Reports Server (NTRS)

Tsang, Chit-Sang; Chie, Chak M.; Lindsey, William C.

1986-01-01

In this final report, the effort spent on Space Station Communications and Tracking System Modeling and RF Link Simulation is described in detail. The effort is mainly divided into three parts: frequency division multiple access (FDMA) system simulation modeling and software implementation; a study on design and evaluation of a functional computerized RF link simulation/analysis system for Space Station; and a study on design and evaluation of simulation system architecture. This report documents the results of these studies. In addition, a separate User's Manual on Space Communications Simulation System (SCSS) (Version 1) documents the software developed for the Space Station FDMA communications system simulation. The final report, SCSS user's manual, and the software located in the NASA JSC system analysis division's VAX 750 computer together serve as the deliverables from LinCom for this project effort.

NASA Electronic Parts and Packaging (NEPP): Space Qualification Guidelines of Optoelectronic and Photonic Devices for Optical Communication Systems

NASA Technical Reports Server (NTRS)

Kim, Quiesup

2001-01-01

Key elements of space qualification of opto-electric and photonic optical devices were overviewed. Efforts were concentrated on the reliability concerns of the devices needed for potential applications in space environments. The ultimate goal for this effort is to gradually establish enough data to develop a space qualification plan of newly developed specific photonic parts using empirical and numerical models to assess the life-time and degradation of the devices for potential long term space missions.

Review and Synopsis of Natural and Human Controls on Fluvial Channel Processes in the Arid West

DTIC Science & Technology

2007-09-01

Parallel to ongoing efforts to revise the U.S. Army Corps of Engineers wetland delineation manual for support of Section 404 under the Clean Water ...Act, the Corps has initiated an effort to develop an Ordinary High Water (OHW) delineation manual. The Arid West region is dominated by watersheds with...features. With a better understanding of the stream dynamics associated with regulated ordinary events, the Corps is now developing OHW functional models

Cryogenic Propellant Storage and Transfer Engineering Development Unit Hydrogen Tank

NASA Technical Reports Server (NTRS)

Werkheiser, Arthur

2015-01-01

The Cryogenic Propellant Storage and Transfer (CPST) project has been a long-running program in the Space Technology Mission Directorate to enhance the knowledge and technology related to handling cryogenic propellants, specifically liquid hydrogen. This particular effort, the CPST engineering development unit (EDU), was a proof of manufacturability effort in support of a flight article. The EDU was built to find and overcome issues related to manufacturability and collect data to anchor the thermal models for use on the flight design.

Nonlinear Constitutive Relations for High Temperature Applications, 1986

NASA Technical Reports Server (NTRS)

1988-01-01

The purpose of the symposium was to review the state-of-the-art in nonlinear constitutive modeling of high temperature materials for aeronautics applications and to identify the need for future research and development efforts in this area. Through this symposium, it was recognized that considerable research efforts are urgently needed in the development of nonlinear constitutive relations for high temperature applications. In the aerospace industry this need is further prompted by recent advances in high temperature materials technology and new demands on material and component performance.

Inadequate Models of Adolescent Substance Use Prevention: Looking for Options to Promote Pro-Social Change and Engagement.

PubMed

Ostaszewski, Krzysztof

2015-01-01

In the adolescent substance use prevention two competing models can be found: negative and positive. The negative model is entirely focused on risks and problems that young people should avoid. The positive model goes beyond that problem-oriented perspective and calls for positive youth growth and development. Both models of prevention seems to be inadequate to address effectively the challenging problem of adolescent substance use associated consequences. Both models are in fact flawed, but in different ways. Old, negative model neglects the power of individual strengths and ecological developmental assets, while new, positive model is often instrumentally used by politicians and other stakeholders for completely different goals than an informed, science-based prevention. As a result many substance use prevention programs implemented at schools and in communities are neither theoretically nor empirically informed. In order to address these flaws, the model of balanced prevention was outlined. It posits that triple well informed efforts are needed to achieve both specific substance use prevention goals and youth personal/social development. These efforts include protection building, risks reducing and individual assets development support. The proposed model is an ongoing work in progress. It can be considered as an encouragement for international dialogue to build a balanced conceptual foundation for adolescent substance use prevention.

An Overview of the Launch Vehicle Blast Environments Development Efforts

NASA Technical Reports Server (NTRS)

Richardson, Erin; Bangham, Mike; Blackwood, James; Skinner, Troy; Hays, Michael; Jackson, Austin; Richman, Ben

2014-01-01

NASA has been funding an ongoing development program to characterize the explosive environments produced during a catastrophic launch vehicle accident. These studies and small-scale tests are focused on the near field environments that threaten the crew. The results indicate that these environments are unlikely to result in immediate destruction of the crew modules. The effort began as an independent assessment by NASA safety organizations, followed by the Ares program and NASA Engineering and Safety Center and now as a Space Launch Systems (SLS) focused effort. The development effort is using the test and accident data available from public or NASA sources as well as focused scaled tests that are examining the fundamental aspects of uncontained explosions of Hydrogen and air and Hydrogen and Oxygen. The primary risk to the crew appears to be the high-energy fragments and these are being characterized for the SLS. The development efforts will characterize the thermal environment of the explosions as well to ensure that the risk is well understood and to document the overall energy balance of an explosion. The effort is multi-path in that analytical, computational and focused testing is being used to develop the knowledge to understand potential SLS explosions. This is an ongoing program with plans that expand the development from fundamental testing at small-scale levels to large-scale tests that can be used to validate models for commercial programs. The ultimate goal is to develop a knowledge base that can be used by vehicle designers to maximize crew survival in an explosion.

Next Generation Community Based Unified Global Modeling System Development and Operational Implementation Strategies at NCEP

NASA Astrophysics Data System (ADS)

Tallapragada, V.

2017-12-01

NOAA's Next Generation Global Prediction System (NGGPS) has provided the unique opportunity to develop and implement a non-hydrostatic global model based on Geophysical Fluid Dynamics Laboratory (GFDL) Finite Volume Cubed Sphere (FV3) Dynamic Core at National Centers for Environmental Prediction (NCEP), making a leap-step advancement in seamless prediction capabilities across all spatial and temporal scales. Model development efforts are centralized with unified model development in the NOAA Environmental Modeling System (NEMS) infrastructure based on Earth System Modeling Framework (ESMF). A more sophisticated coupling among various earth system components is being enabled within NEMS following National Unified Operational Prediction Capability (NUOPC) standards. The eventual goal of unifying global and regional models will enable operational global models operating at convective resolving scales. Apart from the advanced non-hydrostatic dynamic core and coupling to various earth system components, advanced physics and data assimilation techniques are essential for improved forecast skill. NGGPS is spearheading ambitious physics and data assimilation strategies, concentrating on creation of a Common Community Physics Package (CCPP) and Joint Effort for Data Assimilation Integration (JEDI). Both initiatives are expected to be community developed, with emphasis on research transitioning to operations (R2O). The unified modeling system is being built to support the needs of both operations and research. Different layers of community partners are also established with specific roles/responsibilities for researchers, core development partners, trusted super-users, and operations. Stakeholders are engaged at all stages to help drive the direction of development, resources allocations and prioritization. This talk presents the current and future plans of unified model development at NCEP for weather, sub-seasonal, and seasonal climate prediction applications with special emphasis on implementation of NCEP FV3 Global Forecast System (GFS) and Global Ensemble Forecast System (GEFS) into operations by 2019.

Repurposing Waste Streams: Lessons on Integrating Hospital Food Waste into a Community Garden.

PubMed

Galvan, Adri M; Hanson, Ryan; George, Daniel R

2018-04-06

There have been increasing efforts in recent decades to divert institutional food waste into composting programs. As major producers of food waste who must increasingly demonstrate community benefit, hospitals have an incentive to develop such programs. In this article, we explain the emerging opportunity to link hospitals' food services to local community gardens in order to implement robust composting programs. We describe a partnership model at our hospital in central Pennsylvania, share preliminary outcomes establishing feasibility, and offer guidance for future efforts. We also demonstrate that the integration of medical students in such efforts can foster systems thinking in the development of programs to manage hospital waste streams in more ecologically-friendly ways.

Using Remote Sensing Data and Research Results for Urban Heat Island Mitigation

NASA Technical Reports Server (NTRS)

Estes, Maury; Luvall, Jeffrey

1999-01-01

This paper provides information on the characteristics of the urban heat island, research designed to provide the data needed to develop effective urban heat island reduction strategies, and the development of local working groups to develop implementation plans. As background, an overview of research results on the urban heat island phenomenon and the resultant effect on energy usage and air quality will be explored. The use of more reflective roofing materials, paving materials, tree planting, and other initiatives will be explored as a basis for strategies to mitigate urban heat islands and improve the urban environment. Current efforts to use aircraft remote sensing data in Atlanta, Baton Rouge, Sacramento, and Salt Lake City and our work with non-profit organizations designated to lead public education and strategic development efforts will be presented. Efforts to organize working groups comprised of key stakeholders, the process followed in communicating research results, and methodology for soliciting feedback and incorporating ideas into local plans, policies and decision-making will be discussed. Challenges in developing and transferring data products and research results to stakeholders will be presented. It is our ultimate goal that such efforts be integrated into plans and/or decision models that encourage sustainable development.

FATE AND TRANSPORT MODELING OF CONTAMINANTS OF CONCERN FROM A CAFO IN AN AGRICULTURAL WATERSHED

EPA Science Inventory

The groundwater flow and transport modeling effort will require hydrogeological site characterization and the development of a conceptual flow model for the site. Site characterization will involve an assessment of both the surface and subsurface and be accomplished through joint...

EVALUATION TECHNIQUES AND TOOL DEVELOPMENT FOR FY 08 CMAQ RELEASE

EPA Science Inventory

In this task, research efforts are outlined that relate to the AMD Model Evaluation Program element and support CMAQ releases within the FY05-FY08 time period. Model evaluation serves dual purposes; evaluation is necessary to characterize the accuracy of model predictions, and e...

Building A Community Focused Data and Modeling Collaborative platform with Hardware Virtualization Technology

NASA Astrophysics Data System (ADS)

Michaelis, A.; Wang, W.; Melton, F. S.; Votava, P.; Milesi, C.; Hashimoto, H.; Nemani, R. R.; Hiatt, S. H.

2009-12-01

As the length and diversity of the global earth observation data records grow, modeling and analyses of biospheric conditions increasingly requires multiple terabytes of data from a diversity of models and sensors. With network bandwidth beginning to flatten, transmission of these data from centralized data archives presents an increasing challenge, and costs associated with local storage and management of data and compute resources are often significant for individual research and application development efforts. Sharing community valued intermediary data sets, results and codes from individual efforts with others that are not in direct funded collaboration can also be a challenge with respect to time, cost and expertise. We purpose a modeling, data and knowledge center that houses NASA satellite data, climate data and ancillary data where a focused community may come together to share modeling and analysis codes, scientific results, knowledge and expertise on a centralized platform, named Ecosystem Modeling Center (EMC). With the recent development of new technologies for secure hardware virtualization, an opportunity exists to create specific modeling, analysis and compute environments that are customizable, “archiveable” and transferable. Allowing users to instantiate such environments on large compute infrastructures that are directly connected to large data archives may significantly reduce costs and time associated with scientific efforts by alleviating users from redundantly retrieving and integrating data sets and building modeling analysis codes. The EMC platform also provides the possibility for users receiving indirect assistance from expertise through prefabricated compute environments, potentially reducing study “ramp up” times.

Building a Formal Model of a Human-Interactive System: Insights into the Integration of Formal Methods and Human Factors Engineering

NASA Technical Reports Server (NTRS)

Bolton, Matthew L.; Bass, Ellen J.

2009-01-01

Both the human factors engineering (HFE) and formal methods communities are concerned with finding and eliminating problems with safety-critical systems. This work discusses a modeling effort that leveraged methods from both fields to use model checking with HFE practices to perform formal verification of a human-interactive system. Despite the use of a seemingly simple target system, a patient controlled analgesia pump, the initial model proved to be difficult for the model checker to verify in a reasonable amount of time. This resulted in a number of model revisions that affected the HFE architectural, representativeness, and understandability goals of the effort. If formal methods are to meet the needs of the HFE community, additional modeling tools and technological developments are necessary.

Alcohol Abuse Prevention: A Comprehensive Guide for Youth Organizations.

ERIC Educational Resources Information Center

Boys' Clubs of America, New York, NY.

This guide, the culmination of a three year Project TEAM effort by the Boys' Clubs of America, describes numerous strategies for developing an alcohol abuse prevention program. The core of this guide consists of program models developed by the Boys' Club project at seven pilot sites. The models presented cover the following areas: peer leadership,…

Development of the High-Order Decoupled Direct Method in Three Dimensions for Particulate Matter: Enabling Advanced Sensitivity Analysis in Air Quality Models

EPA Science Inventory

The high-order decoupled direct method in three dimensions for particular matter (HDDM-3D/PM) has been implemented in the Community Multiscale Air Quality (CMAQ) model to enable advanced sensitivity analysis. The major effort of this work is to develop high-order DDM sensitivity...

The Emergence of Open-Source Software in North America

ERIC Educational Resources Information Center

Pan, Guohua; Bonk, Curtis J.

2007-01-01

Unlike conventional models of software development, the open source model is based on the collaborative efforts of users who are also co-developers of the software. Interest in open source software has grown exponentially in recent years. A "Google" search for the phrase open source in early 2005 returned 28.8 million webpage hits, while…

Simulation Models for the Electric Power Requirements in a Guideway Transit System

DOT National Transportation Integrated Search

1980-04-01

This report describes a computer simulation model developed at the Transportation Systems Center to study the electrical power distribution characteristics of Automated Guideway Transit (AGT) systems. The objective of this simulation effort is to pro...

Traffic flow simulation for an urban freeway corridor

DOT National Transportation Integrated Search

1998-01-01

The objective of this paper is to develop a realistic and operational macroscopic traffic flow simulation model which requires relatively less data collection efforts. Such a model should be capable of delineating the dynamics of traffic flow created...

Environmental Characteristics of EPA, NRC, and DOE Sites Contaminated with Radioactive Substances

EPA Pesticide Factsheets

This report is one of several documents developed cooperatively by the Interagency Environmental Pathway Modeling Workgroup to help bring a uniform approach to solving environmental modeling problems common to site remediation and restoration efforts.

Connectionist Modelling of Short-Term Memory.

ERIC Educational Resources Information Center

Norris, Dennis; And Others

1995-01-01

Presents the first stage in a research effort developing a detailed computational model of working memory. The central feature of the model is counterintuitive. It is assumed that there is a primacy gradient of activation across successive list items. A second stage of the model is influenced by the combined effects of the primacy gradient and…

Iowa's Tech Prep Model: Issues/Model Components/"Patterns of Evidence." Revised.

ERIC Educational Resources Information Center

North Iowa Area Community Coll., Mason City.

Developed by the Iowa Department of Education, North Iowa Area Community College, and Hawkeye Community College (Iowa), this booklet presents the tech prep model for articulation efforts among all educational entities, business, industry, labor, and communities in Iowa. Following a list of committee members working on the model and graphs of the…

40 CFR Appendix W to Part 51 - Guideline on Air Quality Models

Code of Federal Regulations, 2013 CFR

2013-07-01

... in the Guideline. The third activity is the extensive on-going research efforts by EPA and others in... addition, findings from ongoing research programs, new model development, or results from model evaluations... shown that the model is not biased toward underestimates; and v. A protocol on methods and procedures to...

40 CFR Appendix W to Part 51 - Guideline on Air Quality Models

Code of Federal Regulations, 2012 CFR

2012-07-01

... in the Guideline. The third activity is the extensive on-going research efforts by EPA and others in... addition, findings from ongoing research programs, new model development, or results from model evaluations... shown that the model is not biased toward underestimates; and v. A protocol on methods and procedures to...

40 CFR Appendix W to Part 51 - Guideline on Air Quality Models

Code of Federal Regulations, 2014 CFR

2014-07-01

... in the Guideline. The third activity is the extensive on-going research efforts by EPA and others in... addition, findings from ongoing research programs, new model development, or results from model evaluations... shown that the model is not biased toward underestimates; and v. A protocol on methods and procedures to...

The EGM2008 Global Gravitational Model

NASA Astrophysics Data System (ADS)

Pavlis, N. K.; Holmes, S. A.; Kenyon, S. C.; Factor, J. K.

2008-12-01

The development of a new Earth Gravitational Model (EGM) to degree 2160 has been completed. This model, designated EGM2008, is the product of the final re-iteration of our modelling and estimation approach. Our multi-year effort has produced several Preliminary Gravitational Models (PGM) of increasingly improved performance. One of these models (PGM2007A) was provided for evaluation to an independent Evaluation Working Group, sponsored by the International Association of Geodesy (IAG). In an effort to address certain shortcomings of PGM2007A, we have considered the feedback that we received from this Working Group. As part of this effort, EGM2008 incorporates an improved version of our 5'x5' global gravity anomaly database and has benefited from the latest GRACE based satellite-only solutions (e.g., ITG- GRACE03S). EGM2008 incorporates an improved ocean-wide set of altimetry-derived gravity anomalies that were estimated using PGM2007B (a variant of PGM2007A) and its associated Dynamic Ocean Topography (DOT) model as reference models in a "Remove-Compute-Restore" fashion. For the Least Squares Collocation estimation of our final global 5'x5' area-mean gravity anomaly database, we have used consistently PGM2007B as our reference model to degree 2160. We have developed and used a formulation that predicts area-mean gravity anomalies that are effectively band-limited to degree 2160, thereby minimizing aliasing effects during the harmonic analysis process. We have also placed special emphasis on the refinement and "calibration" of the error estimates that accompany our final combination solution EGM2008. We present the main aspects of the model's development and evaluation. This evaluation was accomplished primarily through the comparison of various model derived quantities with independent data and models (e.g., geoid undulations derived from GPS positioning and spirit levelling, astronomical deflections of the vertical, etc.). We will also present comparisons of our model-implied Dynamic Ocean Topography with other contemporary estimates (e.g., from ECCO).

A comparison of data interoperability approaches of fusion codes with application to synthetic diagnostics

NASA Astrophysics Data System (ADS)

Kruger, Scott; Shasharina, S.; Vadlamani, S.; McCune, D.; Holland, C.; Jenkins, T. G.; Candy, J.; Cary, J. R.; Hakim, A.; Miah, M.; Pletzer, A.

2010-11-01

As various efforts to integrate fusion codes proceed worldwide, standards for sharing data have emerged. In the U.S., the SWIM project has pioneered the development of the Plasma State, which has a flat-hierarchy and is dominated by its use within 1.5D transport codes. The European Integrated Tokamak Modeling effort has developed a more ambitious data interoperability effort organized around the concept of Consistent Physical Objects (CPOs). CPOs have deep hierarchies as needed by an effort that seeks to encompass all of fusion computing. Here, we discuss ideas for implementing data interoperability that is complementary to both the Plasma State and CPOs. By making use of attributes within the netcdf and HDF5 binary file formats, the goals of data interoperability can be achieved with a more informal approach. In addition, a file can be simultaneously interoperable to several standards at once. As an illustration of this approach, we discuss its application to the development of synthetic diagnostics that can be used for multiple codes.

Alternative methods for developing external travel survey data.

DOT National Transportation Integrated Search

2010-10-01

The Texas Department of Transportation (TxDOT) has a comprehensive on-going travel survey : program that supports the travel demand models being developed for transportation planning efforts in urban : areas throughout Texas. One component of the sur...

Integrated optomechanical analysis and testing software development at MIT Lincoln Laboratory

NASA Astrophysics Data System (ADS)

Stoeckel, Gerhard P.; Doyle, Keith B.

2013-09-01

Advanced analytical software capabilities are being developed to advance the design of prototypical hardware in the Engineering Division at MIT Lincoln Laboratory. The current effort is focused on the integration of analysis tools tailored to the work flow, organizational structure, and current technology demands. These tools are being designed to provide superior insight into the interdisciplinary behavior of optical systems and enable rapid assessment and execution of design trades to optimize the design of optomechanical systems. The custom software architecture is designed to exploit and enhance the functionality of existing industry standard commercial software, provide a framework for centralizing internally developed tools, and deliver greater efficiency, productivity, and accuracy through standardization, automation, and integration. Specific efforts have included the development of a feature-rich software package for Structural-Thermal-Optical Performance (STOP) modeling, advanced Line Of Sight (LOS) jitter simulations, and improved integration of dynamic testing and structural modeling.

Propagation Effects in Space-Based Surveillance Systems

DTIC Science & Technology

1982-02-01

This report describes the first year’s effort to investigate propagation effects in space - based radars. A model was developed for analyzing the...deleterious systems effects by first developing a generalized aperture distribution that ultimately can be applied to any space - based radar configuration...The propagation effects are characterized in terms of the SATCOM model striation parameters. The form of a generalized channel model for space - based radars

Presentation on systems cluster research

NASA Technical Reports Server (NTRS)

Morgenthaler, George W.

1989-01-01

This viewgraph presentation presents an overview of systems cluster research performed by the Center for Space Construction. The goals of the research are to develop concepts, insights, and models for space construction and to develop systems engineering/analysis curricula for training future aerospace engineers. The following topics are covered: CSC systems analysis/systems engineering (SIMCON) model, CSC systems cluster schedule, system life-cycle, model optimization techniques, publications, cooperative efforts, and sponsored research.

Class Model Development Using Business Rules

NASA Astrophysics Data System (ADS)

Skersys, Tomas; Gudas, Saulius

New developments in the area of computer-aided system engineering (CASE) greatly improve processes of the information systems development life cycle (ISDLC). Much effort is put into the quality improvement issues, but IS development projects still suffer from the poor quality of models during the system analysis and design cycles. At some degree, quality of models that are developed using CASE tools can be assured using various. automated. model comparison, syntax. checking procedures. It. is also reasonable to check these models against the business domain knowledge, but the domain knowledge stored in the repository of CASE tool (enterprise model) is insufficient (Gudas et al. 2004). Involvement of business domain experts into these processes is complicated because non- IT people often find it difficult to understand models that were developed by IT professionals using some specific modeling language.

A probabilistic assessment of health risks associated with short-term exposure to tropospheric ozone

DOE Office of Scientific and Technical Information (OSTI.GOV)

Whitfield, R.G; Biller, W.F.; Jusko, M.J.

1996-06-01

The work described in this report is part of a larger risk assessment sponsored by the U.S. Environmental Protection Agency. Earlier efforts developed exposure-response relationships for acute health effects among populations engaged in heavy exertion. Those efforts also developed a probabilistic national ambient air quality standards exposure model and a general methodology for integrating probabilistic exposure-response relation- ships and exposure estimates to calculate overall risk results. Recently published data make it possible to model additional health endpoints (for exposure at moderate exertion), including hospital admissions. New air quality and exposure estimates for alternative national ambient air quality standards for ozonemore » are combined with exposure-response models to produce the risk results for hospital admissions and acute health effects. Sample results explain the methodology and introduce risk output formats.« less

Manufacturing data analytics using a virtual factory representation.

PubMed

Jain, Sanjay; Shao, Guodong; Shin, Seung-Jun

2017-01-01

Large manufacturers have been using simulation to support decision-making for design and production. However, with the advancement of technologies and the emergence of big data, simulation can be utilised to perform and support data analytics for associated performance gains. This requires not only significant model development expertise, but also huge data collection and analysis efforts. This paper presents an approach within the frameworks of Design Science Research Methodology and prototyping to address the challenge of increasing the use of modelling, simulation and data analytics in manufacturing via reduction of the development effort. The use of manufacturing simulation models is presented as data analytics applications themselves and for supporting other data analytics applications by serving as data generators and as a tool for validation. The virtual factory concept is presented as the vehicle for manufacturing modelling and simulation. Virtual factory goes beyond traditional simulation models of factories to include multi-resolution modelling capabilities and thus allowing analysis at varying levels of detail. A path is proposed for implementation of the virtual factory concept that builds on developments in technologies and standards. A virtual machine prototype is provided as a demonstration of the use of a virtual representation for manufacturing data analytics.

Nuclear thermal propulsion engine system design analysis code development

NASA Astrophysics Data System (ADS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman J.; Ivanenok, Joseph F.

1992-01-01

A Nuclear Thermal Propulsion (NTP) Engine System Design Analyis Code has recently been developed to characterize key NTP engine system design features. Such a versatile, standalone NTP system performance and engine design code is required to support ongoing and future engine system and vehicle design efforts associated with proposed Space Exploration Initiative (SEI) missions of interest. Key areas of interest in the engine system modeling effort were the reactor, shielding, and inclusion of an engine multi-redundant propellant pump feed system design option. A solid-core nuclear thermal reactor and internal shielding code model was developed to estimate the reactor's thermal-hydraulic and physical parameters based on a prescribed thermal output which was integrated into a state-of-the-art engine system design model. The reactor code module has the capability to model graphite, composite, or carbide fuels. Key output from the model consists of reactor parameters such as thermal power, pressure drop, thermal profile, and heat generation in cooled structures (reflector, shield, and core supports), as well as the engine system parameters such as weight, dimensions, pressures, temperatures, mass flows, and performance. The model's overall analysis methodology and its key assumptions and capabilities are summarized in this paper.

A survey of Applied Psychological Services' models of the human operator

NASA Technical Reports Server (NTRS)

Siegel, A. I.; Wolf, J. J.

1979-01-01

A historical perspective is presented in terms of the major features and status of two families of computer simulation models in which the human operator plays the primary role. Both task oriented and message oriented models are included. Two other recent efforts are summarized which deal with visual information processing. They involve not whole model development but a family of subroutines customized to add the human aspects to existing models. A global diagram of the generalized model development/validation process is presented and related to 15 criteria for model evaluation.

An Integrated Approach to Swept Wing Icing Simulation

NASA Technical Reports Server (NTRS)

Potapczuk, Mark G.; Broeren, Andy P.

2017-01-01

This paper describes the various elements of a simulation approach used to develop a database of ice shape geometries and the resulting aerodynamic performance data for a representative commercial transport wing model exposed to a variety of icing conditions. This effort included testing in the NASA Icing Research Tunnel, the Wichita State University Walter H. Beech Wind Tunnel, and the ONERA F1 Subsonic Wind Tunnel as well as the use of ice accretion codes, an inviscid design code, and computational fluid dynamics codes. Additionally, methods for capturing full three-dimensional ice shape geometries, geometry interpolation along the span of the wing, and creation of artificial ice shapes based upon that geometric data were developed for this effort. The icing conditions used for this effort were representative of actual ice shape encounter scenarios and run the gamut from ice roughness to full three-dimensional scalloped ice shapes. The effort is still underway so this paper is a status report of work accomplished to date and a description of the remaining elements of the effort.

Efforts to Address the Aging Academic Workforce: Assessing Progress through a Three-Stage Model of Institutional Change

ERIC Educational Resources Information Center

Kaskie, Brian; Walker, Mark; Andersson, Matthew

2017-01-01

The aging of the academic workforce is becoming more relevant to policy discussions in higher education. Yet there has been no formal, large-scale analysis of institutional efforts to develop policies and programs for aging employees. We fielded a representative survey of human resource specialists at 187 colleges and universities across the…

Strategies for developing competency models.

PubMed

Marrelli, Anne F; Tondora, Janis; Hoge, Michael A

2005-01-01

There is an emerging trend within healthcare to introduce competency-based approaches in the training, assessment, and development of the workforce. The trend is evident in various disciplines and specialty areas within the field of behavioral health. This article is designed to inform those efforts by presenting a step-by-step process for developing a competency model. An introductory overview of competencies, competency models, and the legal implications of competency development is followed by a description of the seven steps involved in creating a competency model for a specific function, role, or position. This modeling process is drawn from advanced work on competencies in business and industry.

Toxico-Cheminformatics: New and Expanding Public ...

EPA Pesticide Factsheets

High-throughput screening (HTS) technologies, along with efforts to improve public access to chemical toxicity information resources and to systematize older toxicity studies, have the potential to significantly improve information gathering efforts for chemical assessments and predictive capabilities in toxicology. Important developments include: 1) large and growing public resources that link chemical structures to biological activity and toxicity data in searchable format, and that offer more nuanced and varied representations of activity; 2) standardized relational data models that capture relevant details of chemical treatment and effects of published in vivo experiments; and 3) the generation of large amounts of new data from public efforts that are employing HTS technologies to probe a wide range of bioactivity and cellular processes across large swaths of chemical space. By annotating toxicity data with associated chemical structure information, these efforts link data across diverse study domains (e.g., ‘omics’, HTS, traditional toxicity studies), toxicity domains (carcinogenicity, developmental toxicity, neurotoxicity, immunotoxicity, etc) and database sources (EPA, FDA, NCI, DSSTox, PubChem, GEO, ArrayExpress, etc.). Public initiatives are developing systematized data models of toxicity study areas and introducing standardized templates, controlled vocabularies, hierarchical organization, and powerful relational searching capability across capt

Overview of the Gems Model of Volunteer Administration (Generate, Educate, Mobilize and Sustain)

ERIC Educational Resources Information Center

Culp, Ken, III

2012-01-01

To organize and coordinate the efforts of many volunteers, a framework for volunteer engagement is needed. The "GEMS" Model of volunteer administration was developed to assist Extension professionals and volunteer coordinators to effectively administer volunteer programs without delivering the program themselves. The GEMS Model is…

EXPERIMENTAL EVALUATION OF TWO SHARP FRONT MODELS FOR VADOSE ZONE NON-AQUEOUS PHASE LIQUID TRANSPORT

EPA Science Inventory

Recent research efforts on the transport of immiscible organic wastes in subsurface the development of numerical models of various levels of sophistication. Systems have focused on the site characterization data needed to obtain. However, in real field applications, the model p...

The Volpe Center's inter-regional auto trip model : a review of methodology, assumptions, and application

DOT National Transportation Integrated Search

1994-10-31

The Volpe Center first estimated an inter-regional auto trip model as part of its effort to assess the market feasibility of maglev for the National Maglev Initiative (NMI). The original intent was to develop a direct demand model for estimating inte...

System for assessing Aviation's Global Emissions (SAGE), part 1 : model description and inventory results

DOT National Transportation Integrated Search

2007-07-01

In early 2001, the US Federal Aviation Administration embarked on a multi-year effort to develop a new computer model, the System for assessing Aviation's Global Emissions (SAGE). Currently at Version 1.5, the basic use of the model has centered on t...

Feedback control laws for highly maneuverable aircraft

NASA Technical Reports Server (NTRS)

Garrard, William L.; Balas, Gary J.

1994-01-01

During the first half of the year, the investigators concentrated their efforts on completing the design of control laws for the longitudinal axis of the HARV. During the second half of the year they concentrated on the synthesis of control laws for the lateral-directional axes. The longitudinal control law design efforts can be briefly summarized as follows. Longitudinal control laws were developed for the HARV using mu synthesis design techniques coupled with dynamic inversion. An inner loop dynamic inversion controller was used to simplify the system dynamics by eliminating the aerodynamic nonlinearities and inertial cross coupling. Models of the errors resulting from uncertainties in the principal longitudinal aerodynamic terms were developed and included in the model of the HARV with the inner loop dynamic inversion controller. This resulted in an inner loop transfer function model which was an integrator with the modeling errors characterized as uncertainties in gain and phase. Outer loop controllers were then designed using mu synthesis to provide robustness to these modeling errors and give desired response to pilot inputs. Both pitch rate and angle of attack command following systems were designed. The following tasks have been accomplished for the lateral-directional controllers: inner and outer loop dynamic inversion controllers have been designed; an error model based on a linearized perturbation model of the inner loop system was derived; controllers for the inner loop system have been designed, using classical techniques, that control roll rate and Dutch roll response; the inner loop dynamic inversion and classical controllers have been implemented on the six degree of freedom simulation; and lateral-directional control allocation scheme has been developed based on minimizing required control effort.

Seals Flow Code Development

NASA Technical Reports Server (NTRS)

1991-01-01

In recognition of a deficiency in the current modeling capability for seals, an effort was established by NASA to develop verified computational fluid dynamic concepts, codes, and analyses for seals. The objectives were to develop advanced concepts for the design and analysis of seals, to effectively disseminate the information to potential users by way of annual workshops, and to provide experimental verification for the models and codes under a wide range of operating conditions.

A fuzzy-logic based decision-making approach for identification of groundwater quality based on groundwater quality indices.

PubMed

Vadiati, M; Asghari-Moghaddam, A; Nakhaei, M; Adamowski, J; Akbarzadeh, A H

2016-12-15

Due to inherent uncertainties in measurement and analysis, groundwater quality assessment is a difficult task. Artificial intelligence techniques, specifically fuzzy inference systems, have proven useful in evaluating groundwater quality in uncertain and complex hydrogeological systems. In the present study, a Mamdani fuzzy-logic-based decision-making approach was developed to assess groundwater quality based on relevant indices. In an effort to develop a set of new hybrid fuzzy indices for groundwater quality assessment, a Mamdani fuzzy inference model was developed with widely-accepted groundwater quality indices: the Groundwater Quality Index (GQI), the Water Quality Index (WQI), and the Ground Water Quality Index (GWQI). In an effort to present generalized hybrid fuzzy indices a significant effort was made to employ well-known groundwater quality index acceptability ranges as fuzzy model output ranges rather than employing expert knowledge in the fuzzification of output parameters. The proposed approach was evaluated for its ability to assess the drinking water quality of 49 samples collected seasonally from groundwater resources in Iran's Sarab Plain during 2013-2014. Input membership functions were defined as "desirable", "acceptable" and "unacceptable" based on expert knowledge and the standard and permissible limits prescribed by the World Health Organization. Output data were categorized into multiple categories based on the GQI (5 categories), WQI (5 categories), and GWQI (3 categories). Given the potential of fuzzy models to minimize uncertainties, hybrid fuzzy-based indices produce significantly more accurate assessments of groundwater quality than traditional indices. The developed models' accuracy was assessed and a comparison of the performance indices demonstrated the Fuzzy Groundwater Quality Index model to be more accurate than both the Fuzzy Water Quality Index and Fuzzy Ground Water Quality Index models. This suggests that the new hybrid fuzzy indices developed in this research are reliable and flexible when used in groundwater quality assessment for drinking purposes. Copyright © 2016 Elsevier Ltd. All rights reserved.

Solar Sail Roadmap Mission GN and C Challenges

NASA Technical Reports Server (NTRS)

Heaton, Andrew F.

2005-01-01

The NASA In-Space Propulsion program is funding development work for solar sails to enhance future scientific opportunities. Key to this effort are scientific solar sail roadmap missions identified by peer review. The two near-term missions of interest are L1 Diamond and Solar Polar Imager. Additionally, the New Millennium Program is sponsoring the Space Technology 9 (ST9) demonstration mission. Solar sails are one of five technologies competing for the ST9 flight demonstration. Two candidate solar sail missions have been identified for a potential ST9 flight. All the roadmap missions and candidate flight demonstration missions face various GN&C challenges. A variety of efforts are underway to address these challenges. These include control actuator design and testing, low thrust optimization studies, attitude control system design and modeling, control-structure interaction studies, trajectory control design, and solar radiation pressure model development. Here we survey the various efforts underway and identify a few of specific recent interest and focus.

Developing Cognitive Models for Social Simulation from Survey Data

NASA Astrophysics Data System (ADS)

Alt, Jonathan K.; Lieberman, Stephen

The representation of human behavior and cognition continues to challenge the modeling and simulation community. The use of survey and polling instruments to inform belief states, issue stances and action choice models provides a compelling means of developing models and simulations with empirical data. Using these types of data to population social simulations can greatly enhance the feasibility of validation efforts, the reusability of social and behavioral modeling frameworks, and the testable reliability of simulations. We provide a case study demonstrating these effects, document the use of survey data to develop cognitive models, and suggest future paths forward for social and behavioral modeling.

Cost Benefit Analysis Modeling Tool for Electric vs. ICE Airport Ground Support Equipment – Development and Results

DOE Office of Scientific and Technical Information (OSTI.GOV)

James Francfort; Kevin Morrow; Dimitri Hochard

2007-02-01

This report documents efforts to develop a computer tool for modeling the economic payback for comparative airport ground support equipment (GSE) that are propelled by either electric motors or gasoline and diesel engines. The types of GSE modeled are pushback tractors, baggage tractors, and belt loaders. The GSE modeling tool includes an emissions module that estimates the amount of tailpipe emissions saved by replacing internal combustion engine GSE with electric GSE. This report contains modeling assumptions, methodology, a user’s manual, and modeling results. The model was developed based on the operations of two airlines at four United States airports.

Jupiter Europa Orbiter Architecture Definition Process

NASA Technical Reports Server (NTRS)

Rasmussen, Robert; Shishko, Robert

2011-01-01

The proposed Jupiter Europa Orbiter mission, planned for launch in 2020, is using a new architectural process and framework tool to drive its model-based systems engineering effort. The process focuses on getting the architecture right before writing requirements and developing a point design. A new architecture framework tool provides for the structured entry and retrieval of architecture artifacts based on an emerging architecture meta-model. This paper describes the relationships among these artifacts and how they are used in the systems engineering effort. Some early lessons learned are discussed.

Induced Innovation and Social Inequality: Evidence from Infant Medical Care.

PubMed

Cutler, David M; Meara, Ellen; Richards-Shubik, Seth

2012-01-01

We develop a model of induced innovation that applies to medical research. Our model yields three empirical predictions. First, initial death rates and subsequent research effort should be positively correlated. Second, research effort should be associated with more rapid mortality declines. Third, as a byproduct of targeting the most common conditions in the population as a whole, induced innovation leads to growth in mortality disparities between minority and majority groups. Using information on infant deaths in the U.S. between 1983 and 1998, we find support for all three empirical predictions.

Progress of Stirling cycle analysis and loss mechanism characterization

NASA Technical Reports Server (NTRS)

Tew, R. C., Jr.

1986-01-01

An assessment of Stirling engine thermodynamic modeling and design codes shows a general deficiency; this deficiency is due to poor understanding of the fluid flow and heat transfer phenomena that occur in the oscillating flow and pressure level environment within the engines. Stirling engine thermodynamic loss mechanisms are listed. Several experimental and computational research efforts now underway to characterize various loss mechanisms are reviewed. The need for additional experimental rigs and rig upgrades is discussed. Recent developments and current efforts in Stirling engine thermodynamic modeling are also reviewed.

Multiphysics Thrust Chamber Modeling for Nuclear Thermal Propulsion

NASA Technical Reports Server (NTRS)

Wang, Ten-See; Cheng, Gary; Chen, Yen-Sen

2006-01-01

The objective of this effort is to develop an efficient and accurate thermo-fluid computational methodology to predict environments for a solid-core, nuclear thermal engine thrust chamber. The computational methodology is based on an unstructured-grid, pressure-based computational fluid dynamics formulation. A two-pronged approach is employed in this effort: A detailed thermo-fluid analysis on a multi-channel flow element for mid-section corrosion investigation; and a global modeling of the thrust chamber to understand the effect of heat transfer on thrust performance. Preliminary results on both aspects are presented.

A review of nuclear thermal propulsion carbide fuel corrosion and key issues

NASA Technical Reports Server (NTRS)

Pelaccio, Dennis G.; El-Genk, Mohamed S.

1994-01-01

Corrosion (mass loss) of carbide nuclear fuels due to their exposure to hot hydrogen in nuclear thermal propulsion engine systems greatly impacts the performance, thrust-to-weight and life of such systems. This report provides an overview of key issues and processes associated with the corrosion of carbide materials. Additionally, past pertinent development reactor test observations, as well as related experimental work and analysis modeling efforts are reviewed. At the conclusion, recommendations are presented, which provide the foundation for future corrosion modeling and verification efforts.

Enhanced Core Noise Modeling for Turbofan Engines

NASA Technical Reports Server (NTRS)

Stone, James R.; Krejsa, Eugene A.; Clark, Bruce J.

2011-01-01

This report describes work performed by MTC Technologies (MTCT) for NASA Glenn Research Center (GRC) under Contract NAS3-00178, Task Order No. 15. MTCT previously developed a first-generation empirical model that correlates the core/combustion noise of four GE engines, the CF6, CF34, CFM56, and GE90 for General Electric (GE) under Contract No. 200-1X-14W53048, in support of GRC Contract NAS3-01135. MTCT has demonstrated in earlier noise modeling efforts that the improvement of predictive modeling is greatly enhanced by an iterative approach, so in support of NASA's Quiet Aircraft Technology Project, GRC sponsored this effort to improve the model. Since the noise data available for correlation are total engine noise spectra, it is total engine noise that must be predicted. Since the scope of this effort was not sufficient to explore fan and turbine noise, the most meaningful comparisons must be restricted to frequencies below the blade passage frequency. Below the blade passage frequency and at relatively high power settings jet noise is expected to be the dominant source, and comparisons are shown that demonstrate the accuracy of the jet noise model recently developed by MTCT for NASA under Contract NAS3-00178, Task Order No. 10. At lower power settings the core noise became most apparent, and these data corrected for the contribution of jet noise were then used to establish the characteristics of core noise. There is clearly more than one spectral range where core noise is evident, so the spectral approach developed by von Glahn and Krejsa in 1982 wherein four spectral regions overlap, was used in the GE effort. Further analysis indicates that the two higher frequency components, which are often somewhat masked by turbomachinery noise, can be treated as one component, and it is on that basis that the current model is formulated. The frequency scaling relationships are improved and are now based on combustor and core nozzle geometries. In conjunction with the Task Order No. 10 jet noise model, this core noise model is shown to provide statistical accuracy comparable to the jet noise model for frequencies below blade passage. This model is incorporated in the NASA FOOTPR code and a user s guide is provided.

Cost Modeling for Space Optical Telescope Assemblies

NASA Technical Reports Server (NTRS)

Stahl, H. Philip; Henrichs, Todd; Luedtke, Alexander; West, Miranda

2011-01-01

Parametric cost models are used to plan missions, compare concepts and justify technology investments. This paper reviews an on-going effort to develop cost modes for space telescopes. This paper summarizes the methodology used to develop cost models and documents how changes to the database have changed previously published preliminary cost models. While the cost models are evolving, the previously published findings remain valid: it costs less per square meter of collecting aperture to build a large telescope than a small telescope; technology development as a function of time reduces cost; and lower areal density telescopes cost more than more massive telescopes.

Predictive Capability Maturity Model for computational modeling and simulation.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Oberkampf, William Louis; Trucano, Timothy Guy; Pilch, Martin M.

2007-10-01

The Predictive Capability Maturity Model (PCMM) is a new model that can be used to assess the level of maturity of computational modeling and simulation (M&S) efforts. The development of the model is based on both the authors experience and their analysis of similar investigations in the past. The perspective taken in this report is one of judging the usefulness of a predictive capability that relies on the numerical solution to partial differential equations to better inform and improve decision making. The review of past investigations, such as the Software Engineering Institute's Capability Maturity Model Integration and the National Aeronauticsmore » and Space Administration and Department of Defense Technology Readiness Levels, indicates that a more restricted, more interpretable method is needed to assess the maturity of an M&S effort. The PCMM addresses six contributing elements to M&S: (1) representation and geometric fidelity, (2) physics and material model fidelity, (3) code verification, (4) solution verification, (5) model validation, and (6) uncertainty quantification and sensitivity analysis. For each of these elements, attributes are identified that characterize four increasing levels of maturity. Importantly, the PCMM is a structured method for assessing the maturity of an M&S effort that is directed toward an engineering application of interest. The PCMM does not assess whether the M&S effort, the accuracy of the predictions, or the performance of the engineering system satisfies or does not satisfy specified application requirements.« less

Application of Interface Technology in Progressive Failure Analysis of Composite Panels

NASA Technical Reports Server (NTRS)

Sleight, D. W.; Lotts, C. G.

2002-01-01

A progressive failure analysis capability using interface technology is presented. The capability has been implemented in the COMET-AR finite element analysis code developed at the NASA Langley Research Center and is demonstrated on composite panels. The composite panels are analyzed for damage initiation and propagation from initial loading to final failure using a progressive failure analysis capability that includes both geometric and material nonlinearities. Progressive failure analyses are performed on conventional models and interface technology models of the composite panels. Analytical results and the computational effort of the analyses are compared for the conventional models and interface technology models. The analytical results predicted with the interface technology models are in good correlation with the analytical results using the conventional models, while significantly reducing the computational effort.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Adam, J. C.; Stephens, J. C.; Chung, Serena

As managers of agricultural and natural resources are confronted with uncertainties in global change impacts, the complexities associated with the interconnected cycling of nitrogen, carbon, and water present daunting management challenges. Existing models provide detailed information on specific sub-systems (land, air, water, economics, etc). An increasing awareness of the unintended consequences of management decisions resulting from interconnectedness of these sub-systems, however, necessitates coupled regional earth system models (EaSMs). Decision makers’ needs and priorities can be integrated into the model design and development processes to enhance decision-making relevance and "usability" of EaSMs. BioEarth is a current research initiative with a focusmore » on the U.S. Pacific Northwest region that explores the coupling of multiple stand-alone EaSMs to generate usable information for resource decision-making. Direct engagement between model developers and non-academic stakeholders involved in resource and environmental management decisions throughout the model development process is a critical component of this effort. BioEarth utilizes a "bottom-up" approach, upscaling a catchment-scale model to basin and regional scales, as opposed to the "top-down" approach of downscaling global models utilized by most other EaSM efforts. This paper describes the BioEarth initiative and highlights opportunities and challenges associated with coupling multiple stand-alone models to generate usable information for agricultural and natural resource decision-making.« less

Particle Engulfment and Pushing By Solidifying Interfaces

NASA Technical Reports Server (NTRS)

2003-01-01

The study of particle behavior at solid/liquid interfaces (SLI s) is at the center of the Particle Engulfment and Pushing (PEP) research program. Interactions of particles with SLI s have been of interest since the 1960 s, starting with geological observations, i.e., frost heaving. Ever since, this field of research has become significant to such diverse areas as metal matrix composite materials, fabrication of superconductors, and inclusion control in steels. The PEP research effort is geared towards understanding the fundamental physics of the interaction between particles and a planar SLI. Experimental work including 1-g and mu-g experiments accompany the development of analytical and numerical models. The experimental work comprised of substantial groundwork with aluminum (Al) and zinc (Zn) matrices containing spherical zirconia particles, mu-g experiments with metallic Al matrices and the use of transparent organic metal-analogue materials. The modeling efforts have grown from the initial steady-state analytical model to dynamic models, accounting for the initial acceleration of a particle at rest by an advancing SLI. To gain a more comprehensive understanding, numerical models were developed to account for the influence of the thermal and solutal field. Current efforts are geared towards coupling the diffusive 2-D front tracking model with a fluid flow model to account for differences in the physics of interaction between 1-g and -g environments. A significant amount of this theoretical investigation has been and is being performed by co-investigators at NASA MSFC.

A beamline systems model for Accelerator-Driven Transmutation Technology (ADTT) facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, A.M.M.; Paulson, C.C.; Peacock, M.A.

1995-10-01

A beamline systems code, that is being developed for Accelerator-Driven Transmutation Technology (ADTT) facility trade studies, is described. The overall program is a joint Grumman, G.H. Gillespie Associates (GHGA) and Los Alamos National Laboratory effort. The GHGA Accelerator Systems Model (ASM) has been adopted as the framework on which this effort is based. Relevant accelerator and beam transport models from earlier Grumman systems codes are being adapted to this framework. Preliminary physics and engineering models for each ADTT beamline component have been constructed. Examples noted include a Bridge Coupled Drift Tube Linac (BCDTL) and the accelerator thermal system. A decisionmore » has been made to confine the ASM framework principally to beamline modeling, while detailed target/blanket, balance-of-plant and facility costing analysis will be performed externally. An interfacing external balance-of-plant and facility costing model, which will permit the performance of iterative facility trade studies, is under separate development. An ABC (Accelerator Based Conversion) example is used to highlight the present models and capabilities.« less

A beamline systems model for Accelerator-Driven Transmutation Technology (ADTT) facilities

DOE Office of Scientific and Technical Information (OSTI.GOV)

Todd, Alan M. M.; Paulson, C. C.; Peacock, M. A.

1995-09-15

A beamline systems code, that is being developed for Accelerator-Driven Transmutation Technology (ADTT) facility trade studies, is described. The overall program is a joint Grumman, G. H. Gillespie Associates (GHGA) and Los Alamos National Laboratory effort. The GHGA Accelerator Systems Model (ASM) has been adopted as the framework on which this effort is based. Relevant accelerator and beam transport models from earlier Grumman systems codes are being adapted to this framework. Preliminary physics and engineering models for each ADTT beamline component have been constructed. Examples noted include a Bridge Coupled Drift Tube Linac (BCDTL) and the accelerator thermal system. Amore » decision has been made to confine the ASM framework principally to beamline modeling, while detailed target/blanket, balance-of-plant and facility costing analysis will be performed externally. An interfacing external balance-of-plant and facility costing model, which will permit the performance of iterative facility trade studies, is under separate development. An ABC (Accelerator Based Conversion) example is used to highlight the present models and capabilities.« less

Fatigue life prediction modeling for turbine hot section materials

NASA Technical Reports Server (NTRS)

Halford, G. R.; Meyer, T. G.; Nelson, R. S.; Nissley, D. M.; Swanson, G. A.

1989-01-01

A major objective of the fatigue and fracture efforts under the NASA Hot Section Technology (HOST) program was to significantly improve the analytic life prediction tools used by the aeronautical gas turbine engine industry. This was achieved in the areas of high-temperature thermal and mechanical fatigue of bare and coated high-temperature superalloys. The cyclic crack initiation and propagation resistance of nominally isotropic polycrystalline and highly anisotropic single crystal alloys were addressed. Life prediction modeling efforts were devoted to creep-fatigue interaction, oxidation, coatings interactions, multiaxiality of stress-strain states, mean stress effects, cumulative damage, and thermomechanical fatigue. The fatigue crack initiation life models developed to date include the Cyclic Damage Accumulation (CDA) and the Total Strain Version of Strainrange Partitioning (TS-SRP) for nominally isotropic materials, and the Tensile Hysteretic Energy Model for anisotropic superalloys. A fatigue model is being developed based upon the concepts of Path-Independent Integrals (PII) for describing cyclic crack growth under complex nonlinear response at the crack tip due to thermomechanical loading conditions. A micromechanistic oxidation crack extension model was derived. The models are described and discussed.

Quantitative non-destructive testing

NASA Technical Reports Server (NTRS)

Welch, C. S.

1985-01-01

The work undertaken during this period included two primary efforts. The first is a continuation of theoretical development from the previous year of models and data analyses for NDE using the Optical Thermal Infra-Red Measurement System (OPTITHIRMS) system, which involves heat injection with a laser and observation of the resulting thermal pattern with an infrared imaging system. The second is an investigation into the use of the thermoelastic effect as an effective tool for NDE. As in the past, the effort is aimed towards NDE techniques applicable to composite materials in structural applications. The theoretical development described produced several models of temperature patterns over several geometries and material types. Agreement between model data and temperature observations was obtained. A model study with one of these models investigated some fundamental difficulties with the proposed method (the primitive equation method) for obtaining diffusivity values in plates of thickness and supplied guidelines for avoiding these difficulties. A wide range of computing speeds was found among the various models, with a one-dimensional model based on Laplace's integral solution being both very fast and very accurate.

Fatigue life prediction modeling for turbine hot section materials

NASA Technical Reports Server (NTRS)

Halford, G. R.; Meyer, T. G.; Nelson, R. S.; Nissley, D. M.; Swanson, G. A.

1988-01-01

A major objective of the fatigue and fracture efforts under the Hot Section Technology (HOST) program was to significantly improve the analytic life prediction tools used by the aeronautical gas turbine engine industry. This was achieved in the areas of high-temperature thermal and mechanical fatigue of bare and coated high-temperature superalloys. The cyclic crack initiation and propagation resistance of nominally isotropic polycrystalline and highly anisotropic single crystal alloys were addressed. Life prediction modeling efforts were devoted to creep-fatigue interaction, oxidation, coatings interactions, multiaxiality of stress-strain states, mean stress effects, cumulative damage, and thermomechanical fatigue. The fatigue crack initiation life models developed to date include the Cyclic Damage Accumulation (CDA) and the Total Strain Version of Strainrange Partitioning (TS-SRP) for nominally isotropic materials, and the Tensile Hysteretic Energy Model for anisotropic superalloys. A fatigue model is being developed based upon the concepts of Path-Independent Integrals (PII) for describing cyclic crack growth under complex nonlinear response at the crack tip due to thermomechanical loading conditions. A micromechanistic oxidation crack extension model was derived. The models are described and discussed.

HAZARDOUS WASTE IDENTIFICATION

EPA Science Inventory

This research is in direct support of the regulatory reform efforts under the Hazarous Waste Identification (HWIR) and is related to the development of national "exit levels" based on sound scientific data and models. Research focuses on developing a systems approach to modelin...

Design and analysis of radiometric instruments using high-level numerical models and genetic algorithms

NASA Astrophysics Data System (ADS)

Sorensen, Ira Joseph

A primary objective of the effort reported here is to develop a radiometric instrument modeling environment to provide complete end-to-end numerical models of radiometric instruments, integrating the optical, electro-thermal, and electronic systems. The modeling environment consists of a Monte Carlo ray-trace (MCRT) model of the optical system coupled to a transient, three-dimensional finite-difference electrothermal model of the detector assembly with an analytic model of the signal-conditioning circuitry. The environment provides a complete simulation of the dynamic optical and electrothermal behavior of the instrument. The modeling environment is used to create an end-to-end model of the CERES scanning radiometer, and its performance is compared to the performance of an operational CERES total channel as a benchmark. A further objective of this effort is to formulate an efficient design environment for radiometric instruments. To this end, the modeling environment is then combined with evolutionary search algorithms known as genetic algorithms (GA's) to develop a methodology for optimal instrument design using high-level radiometric instrument models. GA's are applied to the design of the optical system and detector system separately and to both as an aggregate function with positive results.

Integrated simulations for fusion research in the 2030's time frame (white paper outline)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Friedman, Alex; LoDestro, Lynda L.; Parker, Jeffrey B.

This white paper presents the rationale for developing a community-wide capability for whole-device modeling, and advocates for an effort with the expectation of persistence: a long-term programmatic commitment, and support for community efforts. Statement of 2030 goal (two suggestions): (a) Robust integrated simulation tools to aid real-time experimental discharges and reactor designs by employing a hierarchy in fidelity of physics models. (b) To produce by the early 2030s a capability for validated, predictive simulation via integration of a suite of physics models from moderate through high fidelity, to understand and plan full plasma discharges, aid in data interpretation, carry outmore » discovery science, and optimize future machine designs. We can achieve this goal via a focused effort to extend current scientific capabilities and rigorously integrate simulations of disparate physics into a comprehensive set of workflows.« less

Cloud Microphysics and Absorption Validation

NASA Technical Reports Server (NTRS)

Ackerman, Steven

2002-01-01

Vertical distributions of particle size and habit were developed from in-situ data collected from three midlatitude cirrus field campaigns (FIRE-1, FIRE-2, and ARM IOP). These new midlatitude microphysical models were used to develop new cirrus scattering models at a number of wavelengths appropriate for use with the MODIS imager (Nasiri et al. 2002). This was the first successful collaborative effort between all the investigators on this proposal. Recent efforts have extended the midlatitude cirrus cloud analyses to tropical cirrus, using in-situ data collected during the Tropical Rainfall Measurement Mission (TRMM) Kwajalein field campaign in 1999. We note that there are critical aspects to the work: a) Improvement in computing the scattering and radiative properties of ice crystals; b) Requirement for copious amounts of cirrus in-situ data, presented in terms of both particle size and habit distributions; c) Development of cirrus microphysical and optical models for various satellite, aircraft, and ground-based instruments based on the theoretical calculations and in-situ measurements; d) Application to satellite data.

Comparison of UWCC MOX fuel measurements to MCNP-REN calculations

DOE Office of Scientific and Technical Information (OSTI.GOV)

Abhold, M.; Baker, M.; Jie, R.

1998-12-31

The development of neutron coincidence counting has greatly improved the accuracy and versatility of neutron-based techniques to assay fissile materials. Today, the shift register analyzer connected to either a passive or active neutron detector is widely used by both domestic and international safeguards organizations. The continued development of these techniques and detectors makes extensive use of the predictions of detector response through the use of Monte Carlo techniques in conjunction with the point reactor model. Unfortunately, the point reactor model, as it is currently used, fails to accurately predict detector response in highly multiplying mediums such as mixed-oxide (MOX) lightmore » water reactor fuel assemblies. For this reason, efforts have been made to modify the currently used Monte Carlo codes and to develop new analytical methods so that this model is not required to predict detector response. The authors describe their efforts to modify a widely used Monte Carlo code for this purpose and also compare calculational results with experimental measurements.« less

Mesoscale modeling of solute precipitation and radiation damage

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yongfeng; Schwen, Daniel; Ke, Huibin

2015-09-01

This report summarizes the low length scale effort during FY 2014 in developing mesoscale capabilities for microstructure evolution in reactor pressure vessels. During operation, reactor pressure vessels are subject to hardening and embrittlement caused by irradiation-induced defect accumulation and irradiation-enhanced solute precipitation. Both defect production and solute precipitation start from the atomic scale, and manifest their eventual effects as degradation in engineering-scale properties. To predict the property degradation, multiscale modeling and simulation are needed to deal with the microstructure evolution, and to link the microstructure feature to material properties. In this report, the development of mesoscale capabilities for defect accumulationmore » and solute precipitation are summarized. Atomic-scale efforts that supply information for the mesoscale capabilities are also included.« less

Marine atmospheric effects on electro-optical systems performance

NASA Astrophysics Data System (ADS)

Richter, Juergen H.; Hughes, Herbert G.

1990-09-01

For the past twelve years, a coordinated tri-service effort has been underway in the United States Department of Defense to provide an atmospheric effects assessment capability for existing and planned electro-optical (E0) systems. This paper reviews the exploratory development effort in the US Navy. A key responsibility for the Navy was the development of marine aerosol models. An initial model, the Navy Aerosol Model (NAN), was developed, tested, and transitioned into LOWTRAN 6. A more comprehensive model, the Navy Oceanic Vertical Aerosol Model (NOVAM), has been formulated and is presently undergoing comprehensive evaluation and testing. Marine aerosols and their extinction properties are only one important factor in EO systems performance assessment. For many EO systems applications, an accurate knowledge of marine background radiances is required in addition to considering the effects of the intervening atmosphere. Accordingly, a capability was developed to estimate the apparent sea surface radiance for different sea states and meteorological conditions. Also, an empirical relationship was developed which directly relates apparent mean sea temperature to calculated mean sky temperature. In situ measurements of relevant environmental parameters are essential for real-time EO systems performance assessment. Direct measurement of slant path extinction would be most desirable. This motivated a careful investigation of lidar (light detection and ranging) techniques including improvements to single-ended lidar profile inversion algorithms and development of new lidar techniques such as double-ended and dual-angle configurations. It was concluded that single-ended, single frequency lidars can not be used to infer slant path extinction with an accuracy necessary to make meaningful performance assessments. Other lidar configurations may find limited application in model validation and research efforts. No technique has emerged yet which could be considered ready for shipboard implementation. A shipboard real-time performance assessment system was developed and named PREOS (Performance and Range for EO Systems). PREOS has been incorporated into the Navy's Tactical Environmental Support System (TESS). The present version of PREOS is a first step in accomplishing the complex task of real-time systems performance assessment. Improved target and background models are under development and will be incorporated into TESS when tested and validated. A reliable assessment capability can be used to develop Tactical Decision Aids (TDAs). TDAs permit optimum selection or combination of sensors and estimation of a ship's own vulnerability against hostile systems.

A Data-Driven Framework for Incorporating New Tools for ...

EPA Pesticide Factsheets

This talk was given during the “Exposure-Based Toxicity Testing” session at the annual meeting of the International Society for Exposure Science. It provided an update on the state of the science and tools that may be employed in risk-based prioritization efforts. It outlined knowledge gained from the data provided using these high-throughput tools to assess chemical bioactivity and to predict chemical exposures and also identified future needs. It provided an opportunity to showcase ongoing research efforts within the National Exposure Research Laboratory and the National Center for Computational Toxicology within the Office of Research and Development to an international audience. The National Exposure Research Laboratory (NERL) Computational Exposure Division (CED) develops and evaluates data, decision-support tools, and models to be applied to media-specific or receptor-specific problem areas. CED uses modeling-based approaches to characterize exposures, evaluate fate and transport, and support environmental diagnostics/forensics with input from multiple data sources. It also develops media- and receptor-specific models, process models, and decision support tools for use both within and outside of EPA.

Studies in the parameterization of cloudiness in climate models and the analysis of radiation fields in general circulation models

NASA Technical Reports Server (NTRS)

HARSHVARDHAN

1990-01-01

Broad-band parameterizations for atmospheric radiative transfer were developed for clear and cloudy skies. These were in the shortwave and longwave regions of the spectrum. These models were compared with other models in an international effort called ICRCCM (Intercomparison of Radiation Codes for Climate Models). The radiation package developed was used for simulations of a General Circulation Model (GCM). A synopsis is provided of the research accomplishments in the two areas separately. Details are available in the published literature.

Development of a Modeling Framework to Support Control Investigations of Sailcraft Missions A First Cut: ABLE Sailcraft Dynamics Model

NASA Technical Reports Server (NTRS)

Sarathy, Sriprakash

2005-01-01

Solar Sailcraft, the stuff of dreams of the H.G. Wells generation, is now a rapidly maturing reality. The promise of unlimited propulsive power by harnessing stellar radiation is close to realization. Currently, efforts are underway to build, prototype and test two configurations. These sails are designed to meet a 20m sail requirement, under guidance of the In-Space Propulsion (ISP) technology program office at MSFC. While these sails will not fly , they are the first steps in improving our understanding of the processes and phenomena at work. As part of the New Millennium Program (NMP) the ST9 technology validation mission hopes to launch and fly a solar sail by 2010 or sooner. Though the Solar Sail community has been studying and validating various concepts over two decades, it was not until recent breakthroughs in structural and material technology, has made possible to build sails that could be launched. With real sails that can be tested (albeit under earth conditions), the real task of engineering a viable spacecraft has finally commenced. Since it is not possible to accurately or practically recreate the actual operating conditions of the sailcraft (zero-G, vacuum and extremely low temperatures), much of the work has focused on developing accurate models that can be used to predict behavior in space, and for sails that are 6-10 times the size of currently existing sails. Since these models can be validated only with real test data under "earth" conditions, the process of modeling and the identification of uncertainty due to model assumptions and scope need to be closely considered. Sailcraft models that exist currently, are primarily focused on detailed physical representations at the component level, these are intended to support prototyping efforts. System level models that cut across different sail configurations and control concepts while maintaining a consistent approach are non-existent. Much effort has been focused on the areas of thrust performance, solar radiation prediction, and sail membrane behavior vis-a-vis their reflective geometry, such as wrinkling/folding/furling as it pertains to thrust prediction. A parallel effort has been conducted on developing usable models for developing attitude control systems (ACS), for different sail configurations in different regimes. There has been very little by way of a system wide exploration of the impact of the various control schemes, thrust prediction models for different sail configurations being considered.

NASA GRC UAS Project - Communications Modeling and Simulation Development Status

NASA Technical Reports Server (NTRS)

Apaza, Rafael; Bretmersky, Steven; Dailey, Justin; Satapathy, Goutam; Ditzenberger, David; Ye, Chris; Kubat, Greg; Chevalier, Christine; Nguyen, Thanh

2014-01-01

The integration of Unmanned Aircraft Systems (UAS) in the National Airspace represents new operational concepts required in civil aviation. These new concepts are evolving as the nation moves toward the Next Generation Air Transportation System (NextGen) under the leadership of the Joint Planning and Development Office (JPDO), and through ongoing work by the Federal Aviation Administration (FAA). The desire and ability to fly UAS in the National Air Space (NAS) in the near term has increased dramatically, and this multi-agency effort to develop and implement a national plan to successfully address the challenges of UAS access to the NAS in a safe and timely manner is well underway. As part of the effort to integrate UAS in the National Airspace, NASA Glenn Research Center is currently involved with providing research into Communications systems and Communication system operations in order to assist with developing requirements for this implementation. In order to provide data and information regarding communication systems performance that will be necessary, NASA GRC is tasked with developing and executing plans for simulations of candidate future UAS command and control communications, in line with architectures and communications technologies being developed and or proposed by NASA and relevant aviation organizations (in particular, RTCA SC-203). The simulations and related analyses will provide insight into the ability of proposed communications technologies and system architectures to enable safe operation of UAS, meeting UAS in the NAS project goals (including performance requirements, scalability, and interoperability), and ultimately leading to a determination of the ability of NextGen communication systems to accommodate UAS. This presentation, compiled by the NASA GRC Modeling and Simulation team, will provide an update to this ongoing effort at NASA GRC as follow-up to the overview of the planned simulation effort presented at ICNS in 2013. The objective of presentation will be to describe the progress made in developing both a NAS-Wide simulation architecture application and the detailed radiocomm system models for this research, and will present interim data and information compiled in the process of developing these simulation capabilities to date.

The Development of Appreciation Learning Model of Indonesia Literature Based Critical Discourse Analysis to Improve the Students' Critical Thinking Skill

ERIC Educational Resources Information Center

Mustofa; Yuwana, H. Setya

2016-01-01

Learning literature should be taken to instill recognition, familiarity and enjoyment of literature as a vehicle for character education. Learning literature must be packaged properly so that students interested in compose competence by developing literature learning models. In an effort to assist students in understanding the success of…

The Devil Is in the Details: Examining the Evidence for "Proven" School-Based Drug Abuse Prevention Programs

ERIC Educational Resources Information Center

Gandhi, Allison Gruner; Murphy-Graham, Erin; Petrosino, Anthony; Chrismer, Sara Schwartz; Weiss, Carol H.

2007-01-01

In an effort to promote evidence-based practice, government officials, researchers, and program developers have developed lists of model programs in the prevention field. This article reviews the evidence used by seven best-practice lists to select five model prevention programs. The authors' examination of this research raises questions about the…

Predicting post-fire tree mortality for 12 western US conifers using the First-Order Fire Effects Model (FOFEM)

Treesearch

Sharon Hood; Duncan Lutes

2017-01-01

Accurate prediction of fire-caused tree mortality is critical for making sound land management decisions such as developing burning prescriptions and post-fire management guidelines. To improve efforts to predict post-fire tree mortality, we developed 3-year post-fire mortality models for 12 Western conifer species - white fir (Abies concolor [Gord. &...

Crop Characteristics Research: Growth and Reflectance Analysis

NASA Technical Reports Server (NTRS)

Badhwar, G. D. (Principal Investigator)

1985-01-01

Much of the early research in remote sensing follows along developing spectral signatures of cover types. It was found, however, that a signature from an unknown cover class could not always be matched to a catalog value of known cover class. This approach was abandoned and supervised classification schemes followed. These were not efficient and required extensive training. It was obvious that data acquired at a single time could not separate cover types. A large portion of the proposed research has concentrated on modeling the temporal behavior of agricultural crops and on removing the need for any training data in remote sensing surveys; the key to which is the solution of the so-called 'signature extension' problem. A clear need to develop spectral estimaters of crop ontogenic stages and yield has existed even though various correlations have been developed. Considerable effort in developing techniques to estimate these variables was devoted to this work. The need to accurately evaluate existing canopy reflectance model(s), improve these models, use them to understand the crop signatures, and estimate leaf area index was the third objective of the proposed work. A synopsis of this research effort is discussed.

The Challenge and Opportunity of Parental Involvement in Juvenile Justice Services.

PubMed

Burke, Jeffrey D; Mulvey, Edward P; Schubert, Carol A; Garbin, Sara R

2014-04-01

The active involvement of parents - whether as recipients, extenders, or managers of services - during their youth's experience with the juvenile justice system is widely assumed to be crucial. Parents and family advocacy groups note persisting concerns with the degree to which successful parental involvement is achieved. Justice system providers are highly motivated and actively working to make improvements. These coalescing interests provide a strong motivation for innovation and improvement regarding family involvement, but the likely success of these efforts is severely limited by the absence of any detailed definition of parental involvement or validated measure of this construct. Determining whether and how parental involvement works in juvenile justice services depends on the development of clear models and sound measurement. Efforts in other child serving systems offer guidance to achieve this goal. A multidimensional working model developed with parents involved in child protective services is presented as a template for developing a model for parental involvement in juvenile justice. Features of the model requiring changes to make it more adaptable to juvenile justice are identified. A systematic research agenda for developing methods and measures to meet the present demands for enhanced parental involvement in juvenile justice services is presented.

The Challenge and Opportunity of Parental Involvement in Juvenile Justice Services

PubMed Central

Burke, Jeffrey D.; Mulvey, Edward P.; Schubert, Carol A.; Garbin, Sara R.

2014-01-01

The active involvement of parents – whether as recipients, extenders, or managers of services - during their youth’s experience with the juvenile justice system is widely assumed to be crucial. Parents and family advocacy groups note persisting concerns with the degree to which successful parental involvement is achieved. Justice system providers are highly motivated and actively working to make improvements. These coalescing interests provide a strong motivation for innovation and improvement regarding family involvement, but the likely success of these efforts is severely limited by the absence of any detailed definition of parental involvement or validated measure of this construct. Determining whether and how parental involvement works in juvenile justice services depends on the development of clear models and sound measurement. Efforts in other child serving systems offer guidance to achieve this goal. A multidimensional working model developed with parents involved in child protective services is presented as a template for developing a model for parental involvement in juvenile justice. Features of the model requiring changes to make it more adaptable to juvenile justice are identified. A systematic research agenda for developing methods and measures to meet the present demands for enhanced parental involvement in juvenile justice services is presented. PMID:24748704

Effort-Related Motivational Effects of the VMAT-2 Inhibitor Tetrabenazine: Implications for Animal Models of the Motivational Symptoms of Depression

PubMed Central

Nunes, Eric J.; Randall, Patrick A.; Hart, Evan E.; Freeland, Charlotte; Yohn, Samantha E.; Baqi, Younis; Müller, Christa E.; López-Cruz, Laura; Correa, Mercè

2013-01-01

Motivated behaviors are often characterized by a high degree of behavioral activation, and work output and organisms frequently make effort-related decisions based upon cost/benefit analyses. Moreover, people with major depression and other disorders often show effort-related motivational symptoms such as anergia, psychomotor retardation, and fatigue. It has been suggested that tasks measuring effort-related choice behavior could be used as animal models of the motivational symptoms of depression, and the present studies characterized the effort-related effects of the vesicular monoamine transport (VMAT) inhibitor tetrabenazine. Tetrabenazine produces depressive symptoms in humans and, because of its selective inhibition of VMAT-2, it preferentially depletes dopamine (DA). Rats were assessed using a concurrent fixed-ratio 5/chow feeding choice task that is known to be sensitive to dopaminergic manipulations. Tetrabenazine shifted response choice in rats, producing a dose-related decrease in lever pressing and a concomitant increase in chow intake. However, it did not alter food intake or preference in parallel free-feeding choice studies. The effects of tetrabenazine on effort-related choice were reversed by the adenosine A2A antagonist MSX-3 and the antidepressant bupropion. A behaviorally active dose of tetrabenazine decreased extracellular DA in nucleus accumbens and increased expression of DARPP-32 in accumbens medium spiny neurons in a pattern indicative of reduced transmission at both D1 and D2 DA receptors. These experiments demonstrate that tetrabenazine, which is used in animal models to produce depression-like effects, can alter effort-related choice behavior. These studies have implications for the development of animal models of the motivational symptoms of depression and related disorders. PMID:24305809

Measurement Requirements for Improved Modeling of Arcjet Facility Flows

NASA Technical Reports Server (NTRS)

Fletcher, Douglas G.

2000-01-01

Current efforts to develop new reusable launch vehicles and to pursue low-cost robotic planetary missions have led to a renewed interest in understanding arc-jet flows. Part of this renewed interest is concerned with improving the understanding of arc-jet test results and the potential use of available computational-fluid- dynamic (CFD) codes to aid in this effort. These CFD codes have been extensively developed and tested for application to nonequilibrium, hypersonic flow modeling. It is envisioned, perhaps naively, that the application of these CFD codes to the simulation of arc-jet flows would serve two purposes: first. the codes would help to characterize the nonequilibrium nature of the arc-jet flows; and second. arc-jet experiments could potentially be used to validate the flow models. These two objectives are, to some extent, mutually exclusive. However, the purpose of the present discussion is to address what role CFD codes can play in the current arc-jet flow characterization effort, and whether or not the simulation of arc-jet facility tests can be used to eva1uate some of the modeling that is used to formu1ate these codes. This presentation is organized into several sections. In the introductory section, the development of large-scale, constricted-arc test facilities within NASA is reviewed, and the current state of flow diagnostics using conventional instrumentation is summarized. The motivation for using CFD to simulate arc-jet flows is addressed in the next section, and the basic requirements for CFD models that would be used for these simulations are briefly discussed. This section is followed by a more detailed description of experimental measurements that are needed to initiate credible simulations and to evaluate their fidelity in the different flow regions of an arc-jet facility. Observations from a recent combined computational and experiment.al investigation of shock-layer flows in a large-scale arc-jet facility are then used to illustrate the current state of development of diagnostic instrumentation, CFD simulations, and general knowledge in the field of arc-jet characterization. Finally, the main points are summarized and recommendations for future efforts are given.

The Earth System Grid Federation (ESGF): Climate Science Infrastructure for Large-scale Data Management and Dissemination

NASA Astrophysics Data System (ADS)

Williams, D. N.

2015-12-01

Progress in understanding and predicting climate change requires advanced tools to securely store, manage, access, process, analyze, and visualize enormous and distributed data sets. Only then can climate researchers understand the effects of climate change across all scales and use this information to inform policy decisions. With the advent of major international climate modeling intercomparisons, a need emerged within the climate-change research community to develop efficient, community-based tools to obtain relevant meteorological and other observational data, develop custom computational models, and export analysis tools for climate-change simulations. While many nascent efforts to fill these gaps appeared, they were not integrated and therefore did not benefit from collaborative development. Sharing huge data sets was difficult, and the lack of data standards prevented the merger of output data from different modeling groups. Thus began one of the largest-ever collaborative data efforts in climate science, resulting in the Earth System Grid Federation (ESGF), which is now used to disseminate model, observational, and reanalysis data for research assessed by the Intergovernmental Panel on Climate Change (IPCC). Today, ESGF is an open-source petabyte-level data storage and dissemination operational code-base that manages secure resources essential for climate change study. It is designed to remain robust even as data volumes grow exponentially. The internationally distributed, peer-to-peer ESGF "data cloud" archive represents the culmination of an effort that began in the late 1990s. ESGF portals are gateways to scientific data collections hosted at sites around the globe that allow the user to register and potentially access the entire ESGF network of data and services. The growing international interest in ESGF development efforts has attracted many others who want to make their data more widely available and easy to use. For example, the World Climate Research Program, which provides governance for CMIP, has now endorsed the ESGF software foundation to be used for ~70 other model intercomparison projects (MIPs), such as obs4MIPs, TAMIP, CFMIP, and GeoMIP. At present, more than 40 projects disseminate their data via ESGF.

Digital Avionics Information System (DAIS): Training Requirements Analysis Model (TRAMOD).

ERIC Educational Resources Information Center

Czuchry, Andrew J.; And Others

The training requirements analysis model (TRAMOD) described in this report represents an important portion of the larger effort called the Digital Avionics Information System (DAIS) Life Cycle Cost (LCC) Study. TRAMOD is the second of three models that comprise an LCC impact modeling system for use in the early stages of system development. As…

Assessing Academic Risk of Student-Athletes: Applicability of the NCAA Graduation Risk Overview Model to GPA

ERIC Educational Resources Information Center

Johnson, James

2013-01-01

In an effort to standardize academic risk assessment, the NCAA developed the graduation risk overview (GRO) model. Although this model was designed to assess graduation risk, its ability to predict grade-point average (GPA) remained unknown. Therefore, 134 individual risk assessments were made to determine GRO model effectiveness in the…

Time optimal control of a jet engine using a quasi-Hermite interpolation model. M.S. Thesis

NASA Technical Reports Server (NTRS)

Comiskey, J. G.

1979-01-01

This work made preliminary efforts to generate nonlinear numerical models of a two-spooled turbofan jet engine, and subject these models to a known method of generating global, nonlinear, time optimal control laws. The models were derived numerically, directly from empirical data, as a first step in developing an automatic modelling procedure.

Environmental fate and exposure models: advances and challenges in 21st century chemical risk assessment.

PubMed

Di Guardo, Antonio; Gouin, Todd; MacLeod, Matthew; Scheringer, Martin

2018-01-24

Environmental fate and exposure models are a powerful means to integrate information on chemicals, their partitioning and degradation behaviour, the environmental scenario and the emissions in order to compile a picture of chemical distribution and fluxes in the multimedia environment. A 1995 pioneering book, resulting from a series of workshops among model developers and users, reported the main advantages and identified needs for research in the field of multimedia fate models. Considerable efforts were devoted to their improvement in the past 25 years and many aspects were refined; notably the inclusion of nanomaterials among the modelled substances, the development of models at different spatial and temporal scales, the estimation of chemical properties and emission data, the incorporation of additional environmental media and processes, the integration of sensitivity and uncertainty analysis in the simulations. However, some challenging issues remain and require research efforts and attention: the need of methods to estimate partition coefficients for polar and ionizable chemical in the environment, a better description of bioavailability in different environments as well as the requirement of injecting more ecological realism in exposure predictions to account for the diversity of ecosystem structures and functions in risk assessment. Finally, to transfer new scientific developments into the realm of regulatory risk assessment, we propose the formation of expert groups that compare, discuss and recommend model modifications and updates and help develop practical tools for risk assessment.

Overview of heat transfer and fluid flow problem areas encountered in Stirling engine modeling

NASA Technical Reports Server (NTRS)

Tew, Roy C., Jr.

1988-01-01

NASA Lewis Research Center has been managing Stirling engine development programs for over a decade. In addition to contractual programs, this work has included in-house engine testing and development of engine computer models. Attempts to validate Stirling engine computer models with test data have demonstrated that engine thermodynamic losses need better characterization. Various Stirling engine thermodynamic losses and efforts that are underway to characterize these losses are discussed.

Assessing the effects of fire disturbances on ecosystems: A scientific agenda for research and management

USGS Publications Warehouse

Schmoldt, D.L.; Peterson, D.L.; Keane, R.E.; Lenihan, J.M.; McKenzie, D.; Weise, D.R.; Sandberg, D.V.

1999-01-01

A team of fire scientists and resource managers convened 17-19 April 1996 in Seattle, Washington, to assess the effects of fire disturbance on ecosystems. Objectives of this workshop were to develop scientific recommendations for future fire research and management activities. These recommendations included a series of numerically ranked scientific and managerial questions and responses focusing on (1) links among fire effects, fuels, and climate; (2) fire as a large-scale disturbance; (3) fire-effects modeling structures; and (4) managerial concerns, applications, and decision support. At the present time, understanding of fire effects and the ability to extrapolate fire-effects knowledge to large spatial scales are limited, because most data have been collected at small spatial scales for specific applications. Although we clearly need more large-scale fire-effects data, it will be more expedient to concentrate efforts on improving and linking existing models that simulate fire effects in a georeferenced format while integrating empirical data as they become available. A significant component of this effort should be improved communication between modelers and managers to develop modeling tools to use in a planning context. Another component of this modeling effort should improve our ability to predict the interactions of fire and potential climatic change at very large spatial scales. The priority issues and approaches described here provide a template for fire science and fire management programs in the next decade and beyond.

Responses to Interpersonal Stress: Normative Changes Across Childhood and the Impact of Peer Victimization

PubMed Central

Troop-Gordon, Wendy; Sugimura, Niwako; Rudolph, Karen D.

2016-01-01

This research examined the development of stress responses across 2nd to 6th grades and whether exposure to peer victimization alters stress response trajectories. Youth (338 girls; 298 boys; M age = 7.97 years, SD = .37) reported on stress responses; teachers and youth reported on peer victimization. Latent growth curve modeling revealed an increase in effortful engagement responses and a decrease in disengagement and involuntary engagement responses during this period. Peer victimization disrupted these normative trajectories, resulting in less effortful engagement and more effortful disengagement and involuntary stress responses in early adolescence. These findings suggest that early peer victimization sensitizes youth to stress by interfering with the development of effective coping and fostering maladaptive stress responses. PMID:27709602

Finding "Models" in Clouds

DOE Office of Scientific and Technical Information (OSTI.GOV)

Leung, Ruby

2017-05-01

Internationally recognized Climate Scientist Ruby Leung is a cloud gazer. But rather than looking for shapes, Ruby’s life’s calling is to develop regional atmospheric models to better predict and understand the effects of global climate change at scales relevant to humans and the environment. Ruby’s accomplishments include developing novel methods for modeling mountain clouds and precipitation in climate models, and improving understanding of hydroclimate variability and change. She also has led efforts to develop regional climate modeling capabilities in the Weather Research and Forecasting model that is widely adopted by scientists worldwide. Ruby is part of a team of PNNLmore » researchers studying the impacts of global warming.« less

Modelling of evaporation of a dispersed liquid component in a chemically active gas flow

NASA Astrophysics Data System (ADS)

Kryukov, V. G.; Naumov, V. I.; Kotov, V. Yu.

1994-01-01

A model has been developed to investigate evaporation of dispersed liquids in chemically active gas flow. Major efforts have been directed at the development of algorithms for implementing this model. The numerical experiments demonstrate that, in the boundary layer, significant changes in the composition and temperature of combustion products take place. This gives the opportunity to more correctly model energy release processes in combustion chambers of liquid-propellant rocket engines, gas-turbine engines, and other power devices.

AERIS : State-of-the-Practice Scan of Environmental Models

DOT National Transportation Integrated Search

2011-06-24

This report has been developed under the Track 1 effort of Phase 1 of the AERIS program and presents the findings of the state-of-the-practice scan of environmental models to estimate environmental impacts (emissions, fuel consumption, etc.) due to c...

A decision support system for transportation infrastructure and supply chain system planning.

DOT National Transportation Integrated Search

2013-07-01

This project makes the results (models and methodology) of the research and development efforts on freight movement modeling (FMM) and supply chain design carried out by faculty at OSU and OU available to transportation and logistics professionals. A...

Predictive Model of Systemic Toxicity (SOT)

EPA Science Inventory

In an effort to ensure chemical safety in light of regulatory advances away from reliance on animal testing, USEPA and L’Oréal have collaborated to develop a quantitative systemic toxicity prediction model. Prediction of human systemic toxicity has proved difficult and remains a ...

The potential impacts of development on wildlands in El Dorado County, California

Treesearch

Shawn C. Saving; Gregory B. Greenwood

2002-01-01

We modeled future development in rapidly urbanizing El Dorado County, California, to assess ecological impacts of expanding urbanization and effectiveness of standard policy mitigation efforts. Using raster land cover data and county parcel data, we constructed a footprint of current development and simulated future development using a modified stochastic flood-fill...

The Wealth of (Indian) Nations: Tribes Are Creating a New Model of Economic Development by Building on Old Strengths.

ERIC Educational Resources Information Center

Ambler, Marjane

1992-01-01

Assesses economic development on American Indian reservations focusing on the work of the Coalition for Indian Development, the failure of past economic policies and development efforts, and roles to be played by tribal governments, the federal government, and tribal colleges. (DMM)

Parenting and the development of effortful control from early childhood to early adolescence: A transactional developmental model.

PubMed

Tiberio, Stacey S; Capaldi, Deborah M; Kerr, David C R; Bertrand, Maria; Pears, Katherine C; Owen, Lee

2016-08-01

Poor effortful control is a key temperamental factor underlying behavioral problems. The bidirectional association of child effortful control with both positive parenting and negative discipline was examined from ages approximately 3 to 13-14 years, involving five time points, and using data from parents and children in the Oregon Youth Study-Three Generational Study (N = 318 children from 150 families). Based on a dynamic developmental systems approach, it was hypothesized that there would be concurrent associations between parenting and child effortful control and bidirectional effects across time from each aspect of parenting to effortful control and from effortful control to each aspect of parenting. It was also hypothesized that associations would be more robust in early childhood, from ages 3 to 7 years, and would diminish as indicated by significantly weaker effects at the older ages, 11-12 to 13-14 years. Longitudinal feedback or mediated effects were also tested. The findings supported (a) stability in each construct over multiple developmental periods; (b) concurrent associations, which were significantly weaker at the older ages; (c) bidirectional effects, consistent with the interpretation that at younger ages children's effortful control influenced parenting, whereas at older child ages, parenting influenced effortful control; and (d) a transactional effect, such that maternal parenting in late childhood was a mechanism explaining children's development of effortful control from middle childhood to early adolescence.

Parenting and the Development of Effortful Control from Early Childhood to Early Adolescence: A Transactional Developmental Model

PubMed Central

Capaldi, Deborah M.; Kerr, David C. R.; Bertrand, Maria; Pears, Katherine C.; Owen, Lee

2016-01-01

Poor effortful control is a key temperamental factor underlying behavioral problems. The bidirectional association of child effortful control with both positive parenting and negative discipline was examined from ages approximately 3 to 13–14 years, involving 5 time points, and using data from parents and children in the Oregon Youth Study-Three Generational Study (N = 318 children from 150 families). Based on a dynamic developmental systems approach, it was hypothesized that there would be concurrent associations between parenting and child effortful control and bidirectional effects across time from each aspect of parenting to effortful control and from effortful control to each aspect of parenting. It was also hypothesized that associations would be more robust in early childhood, from ages 3 to 7 years, and would diminish as indicated by significantly weaker effects at the older ages, 11–12 to 13–14 years. Longitudinal feedback or mediated effects were also tested. Findings supported (a) stability in each construct over multiple developmental periods; (b) concurrent associations, which were significantly weaker at the older ages; (c) bidirectional effects, consistent with the interpretation that at younger ages children’s effortful control influenced parenting, whereas at older child ages, parenting influenced effortful control; and (d) a transactional effect, such that maternal parenting in late childhood was a mechanism explaining children’s development of effortful control from midchildhood to early adolescence. PMID:27427809

Connecting Requirements to Architecture and Analysis via Model-Based Systems Engineering

NASA Technical Reports Server (NTRS)

Cole, Bjorn F.; Jenkins, J. Steven

2015-01-01

In traditional systems engineering practice, architecture, concept development, and requirements development are related but still separate activities. Concepts for operation, key technical approaches, and related proofs of concept are developed. These inform the formulation of an architecture at multiple levels, starting with the overall system composition and functionality and progressing into more detail. As this formulation is done, a parallel activity develops a set of English statements that constrain solutions. These requirements are often called "shall statements" since they are formulated to use "shall." The separation of requirements from design is exacerbated by well-meaning tools like the Dynamic Object-Oriented Requirements System (DOORS) that remained separated from engineering design tools. With the Europa Clipper project, efforts are being taken to change the requirements development approach from a separate activity to one intimately embedded in formulation effort. This paper presents a modeling approach and related tooling to generate English requirement statements from constraints embedded in architecture definition.

Life prediction and constitutive models for engine hot section anisotropic materials program

NASA Technical Reports Server (NTRS)

Nissley, D. M.; Meyer, T. G.; Walker, K. P.

1992-01-01

This report presents a summary of results from a 7 year program designed to develop generic constitutive and life prediction approaches and models for nickel-based single crystal gas turbine airfoils. The program was composed of a base program and an optional program. The base program addressed the high temperature coated single crystal regime above the airfoil root platform. The optional program investigated the low temperature uncoated single crystal regime below the airfoil root platform including the notched conditions of the airfoil attachment. Both base and option programs involved experimental and analytical efforts. Results from uniaxial constitutive and fatigue life experiments of coated and uncoated PWA 1480 single crystal material formed the basis for the analytical modeling effort. Four single crystal primary orientations were used in the experiments: group of zone axes (001), group of zone axes (011), group of zone axes (111), and group of zone axes (213). Specific secondary orientations were also selected for the notched experiments in the optional program. Constitutive models for an overlay coating and PWA 1480 single crystal materials were developed based on isothermal hysteresis loop data and verified using thermomechanical (TMF) hysteresis loop data. A fatigue life approach and life models were developed for TMF crack initiation of coated PWA 1480. A life model was developed for smooth and notched fatigue in the option program. Finally, computer software incorporating the overlay coating and PWA 1480 constitutive and life models was developed.

Construction of an advanced software tool for planetary atmospheric modeling

NASA Technical Reports Server (NTRS)

Friedland, Peter; Keller, Richard M.; Mckay, Christopher P.; Sims, Michael H.; Thompson, David E.

1993-01-01

Scientific model-building can be a time intensive and painstaking process, often involving the development of large complex computer programs. Despite the effort involved, scientific models cannot be distributed easily and shared with other scientists. In general, implemented scientific models are complicated, idiosyncratic, and difficult for anyone but the original scientist/programmer to understand. We propose to construct a scientific modeling software tool that serves as an aid to the scientist in developing, using and sharing models. The proposed tool will include an interactive intelligent graphical interface and a high-level domain-specific modeling language. As a testbed for this research, we propose to develop a software prototype in the domain of planetary atmospheric modeling.

Construction of an advanced software tool for planetary atmospheric modeling

NASA Technical Reports Server (NTRS)

Friedland, Peter; Keller, Richard M.; Mckay, Christopher P.; Sims, Michael H.; Thompson, David E.

1992-01-01

Scientific model-building can be a time intensive and painstaking process, often involving the development of large complex computer programs. Despite the effort involved, scientific models cannot be distributed easily and shared with other scientists. In general, implemented scientific models are complicated, idiosyncratic, and difficult for anyone but the original scientist/programmer to understand. We propose to construct a scientific modeling software tool that serves as an aid to the scientist in developing, using and sharing models. The proposed tool will include an interactive intelligent graphical interface and a high-level domain-specific modeling language. As a test bed for this research, we propose to develop a software prototype in the domain of planetary atmospheric modeling.

Modeling of transitional flows

NASA Technical Reports Server (NTRS)

Lund, Thomas S.

1988-01-01

An effort directed at developing improved transitional models was initiated. The focus of this work was concentrated on the critical assessment of a popular existing transitional model developed by McDonald and Fish in 1972. The objective of this effort was to identify the shortcomings of the McDonald-Fish model and to use the insights gained to suggest modifications or alterations of the basic model. In order to evaluate the transitional model, a compressible boundary layer code was required. Accordingly, a two-dimensional compressible boundary layer code was developed. The program was based on a three-point fully implicit finite difference algorithm where the equations were solved in an uncoupled manner with second order extrapolation used to evaluate the non-linear coefficients. Iteration was offered as an option if the extrapolation error could not be tolerated. The differencing scheme was arranged to be second order in both spatial directions on an arbitrarily stretched mesh. A variety of boundary condition options were implemented including specification of an external pressure gradient, specification of a wall temperature distribution, and specification of an external temperature distribution. Overall the results of the initial phase of this work indicate that the McDonald-Fish model does a poor job at predicting the details of the turbulent flow structure during the transition region.

In My Own Time: Tuition Fees, Class Time and Student Effort in Non-Formal (Or Continuing) Education

ERIC Educational Resources Information Center

Bolli, Thomas; Johnes, Geraint

2015-01-01

We develop and empirically test a model which examines the impact of changes in class time and tuition fees on student effort in the form of private study. The data come from the European Union's Adult Education Survey, conducted over the period 2005-2008. We find, in line with theoretical predictions, that the time students devote to private…

A GIS-based framework for evaluating investments in fire management: Spatial allocation of recreation values

Treesearch

Kenneth A. Baerenklau; Armando González-Cabán; Catrina I. Páez; Edgard Chávez

2009-01-01

The U.S. Forest Service is responsible for developing tools to facilitate effective and efficient fire management on wildlands and urban-wildland interfaces. Existing GIS-based fire modeling software only permits estimation of the costs of fire prevention and mitigation efforts as well as the effects of those efforts on fire behavior. This research demonstrates how the...

Child Effortful Control as a Mediator of Parenting Practices on Externalizing Behavior: Evidence for a Sex-Differentiated Pathway across the Transition from Preschool to School

ERIC Educational Resources Information Center

Chang, Hyein; Olson, Sheryl L.; Sameroff, Arnold J.; Sexton, Holly R.

2011-01-01

An explanatory model for children's development of disruptive behavior across the transition from preschool to school was tested. It was hypothesized that child effortful control would mediate the effects of parenting on children's externalizing behavior and that child sex would moderate these relations. Participants were 241 children (123 boys)…

The Decision Sciences in Vocational Education Leadership Development Programs. Project Monograph.

ERIC Educational Resources Information Center

McNamara, James F.

This essay explores how the application of the decision sciences in the interdisciplinary training, research, and development activities of model graduate professional schools of management, urban and public affairs, business, government, and regional planning might be linked to current efforts to improve leadership development and training…

Collaborative Outcome Measurement: Development of the Nationally Standardized Minimum Data Set

ERIC Educational Resources Information Center

Stephens, Barry C.; Kirchner, Corinne; Orr, Alberta L.; Suvino, Dawn; Rogers, Priscilla

2009-01-01

This article discusses the challenging process of developing a common data set for independent living programs serving older adults who are visually impaired. The three-year project, which included collaborative efforts among many stakeholders that encompass diverse program models, resulted in the development of the Internet-based Nationally…

A 10-Year Mechatronics Curriculum Development Initiative: Relevance, Content, and Results--Part II

ERIC Educational Resources Information Center

Krishnan, M.; Das, S.; Yost, S. A.

2010-01-01

This paper describes the second and third phases of a comprehensive mechatronics curriculum development effort. They encompass the development of two advanced mechatronics courses ("Simulation and Modeling of Mechatronic Systems" and "Sensors and Actuators for Mechatronic Systems"), the formulation of a Mechatronics concentration, and offshoot…

Cabin Atmosphere Monitoring System (CAMS), pre-prototype model development continuation

NASA Technical Reports Server (NTRS)

Bursack, W. W.; Harris, W. A.

1975-01-01

The development of the Cabin Atmosphere Monitoring System (CAMS) is described. Attention was directed toward improving stability and reliability of the design using flight application guidelines. Considerable effort was devoted to the development of a temperature-stable RF/DC generator used for excitation of the quadrupole mass filter. Minor design changes were made in the preprototype model. Specific gas measurement examples are included along with a discussion of the measurement rationale employed.

Development of an automated procedure for estimation of the spatial variation of runoff in large river basins

USDA-ARS?s Scientific Manuscript database

The use of distributed parameter models to address water resource management problems has increased in recent years. Calibration is necessary to reduce the uncertainties associated with model input parameters. Manual calibration of a distributed parameter model is a very time consuming effort. There...

Youth and Work: Toward a Model of Lifetime Economic Prospects.

ERIC Educational Resources Information Center

Carroll, Stephen J.; Pascal, Anthony H.

As part of an effort to reduce inequalities in economic opportunities confronting the young, this general model of youth behavior and opportunity was developed. Underlying the model are three sets of variables which influence economic opportunities: experience, perceptions, and opportunities. The relations between behavior at a point in time and…

Performance Technology--Not a One-Size-Fits-All Profession

ERIC Educational Resources Information Center

Dierkes, Sunda V.

2012-01-01

The current debate over whether to choose just one universal human performance technology (HPT) model, in particular Langdon's language of work (LOW) model, promises a shared understanding among HPT professionals, credibility for the HPT profession, and a return on investment of time and effort in developing performance models over more than 70…

MAGDAIRE: A Model to Foster Pre-Service Teachers' Ability in Integrating ICT and Teaching in Taiwan

ERIC Educational Resources Information Center

Chang, Chun-Yen; Chien, Yu-Ta; Chang, Yueh-Hsia; Lin, Chen-Yung

2012-01-01

This report describes our efforts in fostering Taiwanese pre-service teachers' ability to integrate information and communication technology (ICT) and teaching. The current state of science teacher education and ICT policies in Taiwan are documented briefly. The course model, MAGDAIRE (abbreviated from Modeled Analysis, Guided Development,…

The influence of data curation on QSAR Modeling – examining issues of quality versus quantity of data (SOT)

EPA Science Inventory

The construction of QSAR models is critically dependent on the quality of available data. As part of our efforts to develop public platforms to provide access to predictive models, we have attempted to discriminate the influence of the quality versus quantity of data available ...

HEAVY-DUTY DIESEL VEHICLE MODAL EMISSION MODEL (HDDV-MEM): VOLUME I: MODAL EMISSION MODELING FRAMEWORK; VOLUME II: MODAL COMPONENTS AND OUTPUTS

EPA Science Inventory

This research outlines a proposed Heavy-Duty Diesel Vehicle Modal Emission Modeling Framework (HDDV-MEMF) for heavy-duty diesel-powered trucks and buses. The heavy-duty vehicle modal modules being developed under this research effort, although different, should be compatible wi...

School Based/University Collaborative Effort: A Pre Service Model.

ERIC Educational Resources Information Center

Bercik, Janet T.

This paper discusses the principles and describes the planning and development of a student teaching program model for Northeastern Illinois University students. The program is in its fourth year and was collaboratively designed by faculty from the university and a local middle school. The model is based on the importance of communication,…

Development Parenting Model to Increase the Independence of Children

ERIC Educational Resources Information Center

Sunarty, Kustiah; Dirawan, Gufran Darma

2015-01-01

This study examines parenting and the child's independence model. The research problem is whether there is a relationship between parenting and the child's independence. The purpose of research is to determine: firstly, the type of parenting in an effort to increase the independence of the child; and the relationship between parenting models and…

Software Engineering Laboratory (SEL) cleanroom process model

NASA Technical Reports Server (NTRS)

Green, Scott; Basili, Victor; Godfrey, Sally; Mcgarry, Frank; Pajerski, Rose; Waligora, Sharon

1991-01-01

The Software Engineering Laboratory (SEL) cleanroom process model is described. The term 'cleanroom' originates in the integrated circuit (IC) production process, where IC's are assembled in dust free 'clean rooms' to prevent the destructive effects of dust. When applying the clean room methodology to the development of software systems, the primary focus is on software defect prevention rather than defect removal. The model is based on data and analysis from previous cleanroom efforts within the SEL and is tailored to serve as a guideline in applying the methodology to future production software efforts. The phases that are part of the process model life cycle from the delivery of requirements to the start of acceptance testing are described. For each defined phase, a set of specific activities is discussed, and the appropriate data flow is described. Pertinent managerial issues, key similarities and differences between the SEL's cleanroom process model and the standard development approach used on SEL projects, and significant lessons learned from prior cleanroom projects are presented. It is intended that the process model described here will be further tailored as additional SEL cleanroom projects are analyzed.

Longitudinal relations among parents' reactions to children's negative emotions, effortful control, and math achievement in early elementary school.

PubMed

Swanson, Jodi; Valiente, Carlos; Lemery-Chalfant, Kathryn; Bradley, Robert H; Eggum-Wilkens, Natalie D

2014-01-01

Panel mediation models and fixed-effects models were used to explore longitudinal relations among parents' reactions to children's displays of negative emotions, children's effortful control (EC), and children's math achievement (N = 291; M age in fall of kindergarten = 5.66 years, SD = .39 year) across kindergarten through second grade. Parents reported their reactions and children's EC. Math achievement was assessed with a standardized achievement test. First-grade EC mediated the relation between parents' reactions at kindergarten and second-grade math achievement, beyond stability in constructs across study years. Panel mediation model results suggested that socialization of EC may be one method of promoting math achievement in early school; however, when all omitted time-invariant covariates of EC and math achievement were controlled, first-grade EC no longer predicted second-grade math achievement. © 2014 The Authors. Child Development © 2014 Society for Research in Child Development, Inc.

Group-Based Active Learning of Classification Models.

PubMed

Luo, Zhipeng; Hauskrecht, Milos

2017-05-01

Learning of classification models from real-world data often requires additional human expert effort to annotate the data. However, this process can be rather costly and finding ways of reducing the human annotation effort is critical for this task. The objective of this paper is to develop and study new ways of providing human feedback for efficient learning of classification models by labeling groups of examples. Briefly, unlike traditional active learning methods that seek feedback on individual examples, we develop a new group-based active learning framework that solicits label information on groups of multiple examples. In order to describe groups in a user-friendly way, conjunctive patterns are used to compactly represent groups. Our empirical study on 12 UCI data sets demonstrates the advantages and superiority of our approach over both classic instance-based active learning work, as well as existing group-based active-learning methods.

Space Synthetic Biology Project

NASA Technical Reports Server (NTRS)

Howard, David; Roman, Monsi; Mansell, James (Matt)

2015-01-01

Synthetic biology is an effort to make genetic engineering more useful by standardizing sections of genetic code. By standardizing genetic components, biological engineering will become much more similar to traditional fields of engineering, in which well-defined components and subsystems are readily available in markets. Specifications of the behavior of those components and subsystems can be used to model a system which incorporates them. Then, the behavior of the novel system can be simulated and optimized. Finally, the components and subsystems can be purchased and assembled to create the optimized system, which most often will exhibit behavior similar to that indicated by the model. The Space Synthetic Biology project began in 2012 as a multi-Center effort. The purpose of this project was to harness Synthetic Biology principals to enable NASA's missions. A central target for application was to Environmental Control & Life Support (ECLS). Engineers from NASA Marshall Space Flight Center's (MSFC's) ECLS Systems Development Branch (ES62) were brought into the project to contribute expertise in operational ECLS systems. Project lead scientists chose to pursue the development of bioelectrochemical technologies to spacecraft life support. Therefore, the ECLS element of the project became essentially an effort to develop a bioelectrochemical ECLS subsystem. Bioelectrochemical systems exploit the ability of many microorganisms to drive their metabolisms by direct or indirect utilization of electrical potential gradients. Whereas many microorganisms are capable of deriving the energy required for the processes of interest (such as carbon dioxide (CO2) fixation) from sunlight, it is believed that subsystems utilizing electrotrophs will exhibit smaller mass, volume, and power requirements than those that derive their energy from sunlight. In the first 2 years of the project, MSFC personnel conducted modeling, simulation, and conceptual design efforts to assist the project in selecting the best approaches to the application of bioelectrochemical technologies to ECLS. Figure 1 shows results of simulation of charge transport in an experimental system. Figure 2 shows one of five conceptual designs for ECLS subsystems based on bioelectrochemical reactors. Also during the first 2 years, some work was undertaken to gather fundamental data (conductivities, overpotentials) relevant to the modeling efforts.

A Thermo-Poromechanics Finite Element Model for Predicting Arterial Tissue Fusion

NASA Astrophysics Data System (ADS)

Fankell, Douglas P.

This work provides modeling efforts and supplemental experimental work performed towards the ultimate goal of modeling heat transfer, mass transfer, and deformation occurring in biological tissue, in particular during arterial fusion and cutting. Developing accurate models of these processes accomplishes two goals. First, accurate models would enable engineers to design devices to be safer and less expensive. Second, the mechanisms behind tissue fusion and cutting are widely unknown; models with the ability to accurately predict physical phenomena occurring in the tissue will allow for insight into the underlying mechanisms of the processes. This work presents three aims and the efforts in achieving them, leading to an accurate model of tissue fusion and more broadly the thermo-poromechanics (TPM) occurring within biological tissue. Chapters 1 and 2 provide the motivation for developing accurate TPM models of biological tissue and an overview of previous modeling efforts. In Chapter 3, a coupled thermo-structural finite element (FE) model with the ability to predict arterial cutting is offered. From the work presented in Chapter 3, it became obvious a more detailed model was needed. Chapter 4 meets this need by presenting small strain TPM theory and its implementation in an FE code. The model is then used to simulate thermal tissue fusion. These simulations show the model's promise in predicting the water content and temperature of arterial wall tissue during the fusion process, but it is limited by its small deformation assumptions. Chapters 5-7 attempt to address this limitation by developing and implementing a large deformation TPM FE model. Chapters 5, 6, and 7 present a thermodynamically consistent, large deformation TPM FE model and its ability to simulate tissue fusion. Ultimately, this work provides several methods of simulating arterial tissue fusion and the thermo-poromechanics of biological tissue. It is the first work, to the author's knowledge, to simulate the fully coupled TPM of biological tissue and the first to present a fully coupled large deformation TPM FE model. In doing so, a stepping stone for more advanced modeling of biological tissue has been laid.

Development of Probabilistic Structural Analysis Integrated with Manufacturing Processes

NASA Technical Reports Server (NTRS)

Pai, Shantaram S.; Nagpal, Vinod K.

2007-01-01

An effort has been initiated to integrate manufacturing process simulations with probabilistic structural analyses in order to capture the important impacts of manufacturing uncertainties on component stress levels and life. Two physics-based manufacturing process models (one for powdered metal forging and the other for annular deformation resistance welding) have been linked to the NESSUS structural analysis code. This paper describes the methodology developed to perform this integration including several examples. Although this effort is still underway, particularly for full integration of a probabilistic analysis, the progress to date has been encouraging and a software interface that implements the methodology has been developed. The purpose of this paper is to report this preliminary development.

The Pathologist Workforce in the United States: II. An Interactive Modeling Tool for Analyzing Future Qualitative and Quantitative Staffing Demands for Services.

PubMed

Robboy, Stanley J; Gupta, Saurabh; Crawford, James M; Cohen, Michael B; Karcher, Donald S; Leonard, Debra G B; Magnani, Barbarajean; Novis, David A; Prystowsky, Michael B; Powell, Suzanne Z; Gross, David J; Black-Schaffer, W Stephen

2015-11-01

Pathologists are physicians who make diagnoses based on interpretation of tissue and cellular specimens (surgical/cytopathology, molecular/genomic pathology, autopsy), provide medical leadership and consultation for laboratory medicine, and are integral members of their institutions' interdisciplinary patient care teams. To develop a dynamic modeling tool to examine how individual factors and practice variables can forecast demand for pathologist services. Build and test a computer-based software model populated with data from surveys and best estimates about current and new pathologist efforts. Most pathologists' efforts focus on anatomic (52%), laboratory (14%), and other direct services (8%) for individual patients. Population-focused services (12%) (eg, laboratory medical direction) and other professional responsibilities (14%) (eg, teaching, research, and hospital committees) consume the rest of their time. Modeling scenarios were used to assess the need to increase or decrease efforts related globally to the Affordable Care Act, and specifically, to genomic medicine, laboratory consolidation, laboratory medical direction, and new areas where pathologists' expertise can add value. Our modeling tool allows pathologists, educators, and policy experts to assess how various factors may affect demand for pathologists' services. These factors include an aging population, advances in biomedical technology, and changing roles in capitated, value-based, and team-based medical care systems. In the future, pathologists will likely have to assume new roles, develop new expertise, and become more efficient in practicing medicine to accommodate new value-based delivery models.

Development, Testing, and Validation of a Model-Based Tool to Predict Operator Responses in Unexpected Workload Transitions

NASA Technical Reports Server (NTRS)

Sebok, Angelia; Wickens, Christopher; Sargent, Robert

2015-01-01

One human factors challenge is predicting operator performance in novel situations. Approaches such as drawing on relevant previous experience, and developing computational models to predict operator performance in complex situations, offer potential methods to address this challenge. A few concerns with modeling operator performance are that models need to realistic, and they need to be tested empirically and validated. In addition, many existing human performance modeling tools are complex and require that an analyst gain significant experience to be able to develop models for meaningful data collection. This paper describes an effort to address these challenges by developing an easy to use model-based tool, using models that were developed from a review of existing human performance literature and targeted experimental studies, and performing an empirical validation of key model predictions.

Modeling Fecundity in Birds: Conceptual Overview, Current Models, and Considerations for Future Developments

EPA Science Inventory

Understanding fecundity is fundamental to understanding fitness, population dynamics, conservation, ecological risk, and management issues of birds. For all the efforts placed in measuring fecundity or its surrogates over the past century of avian research, it is still poorly me...

A change roadmap towards research paradigm in low-resource countries: retinoblastoma model in Egypt.

PubMed

Alfaar, Ahmad Samir; Nour, Radwa; Bakry, Mohamed Sabry; Kamal, Mohamed; Hassanain, Omneya; Labib, Rania M; Rashed, Wafaa M; Elzomor, Hossam; Alieldin, Adel; Taha, Hala; Zaghloul, Mohamed Saad; Ezzat, Sameera; AboElnaga, Sherif

2017-02-01

Research on childhood diseases represents a great global challenge. This challenge is maximized in both childhood cancer disciplines and developing world. In this paper, we aim at describing our institution experience in starting a structured childhood cancer research program in one of the developing countries in a short time based on philanthropic efforts. We used retinoblastoma as an example for what was conducted in this program. Starting in 2008, this program included improving clinical practice and its related supporting services besides developing new research services that both complement the clinical activities and pave the way towards creating a research foundation in the country. Results included developing hospital standard treatment protocols, developing national clinical trials, joining international consortia for childhood cancers clinical trials, developing data collection tools and real-time analytics, establishing a biobanking facility, and developing highly qualified team for conducting clinical, epidemiologic, and translational research studies. Moreover, this effort resulted in improving both clinical practice and patients' awareness nationally. This model can be used for other startup facilities that aim at finding answers for their national health problems in low-resource setting.

Leveraging annotation-based modeling with Jump.

PubMed

Bergmayr, Alexander; Grossniklaus, Michael; Wimmer, Manuel; Kappel, Gerti

2018-01-01

The capability of UML profiles to serve as annotation mechanism has been recognized in both research and industry. Today's modeling tools offer profiles specific to platforms, such as Java, as they facilitate model-based engineering approaches. However, considering the large number of possible annotations in Java, manually developing the corresponding profiles would only be achievable by huge development and maintenance efforts. Thus, leveraging annotation-based modeling requires an automated approach capable of generating platform-specific profiles from Java libraries. To address this challenge, we present the fully automated transformation chain realized by Jump, thereby continuing existing mapping efforts between Java and UML by emphasizing on annotations and profiles. The evaluation of Jump shows that it scales for large Java libraries and generates profiles of equal or even improved quality compared to profiles currently used in practice. Furthermore, we demonstrate the practical value of Jump by contributing profiles that facilitate reverse engineering and forward engineering processes for the Java platform by applying it to a modernization scenario.

Providing an empirical basis for optimizing the verification and testing phases of software development

NASA Technical Reports Server (NTRS)

Briand, Lionel C.; Basili, Victor R.; Hetmanski, Christopher J.

1992-01-01

Applying equal testing and verification effort to all parts of a software system is not very efficient, especially when resources are limited and scheduling is tight. Therefore, one needs to be able to differentiate low/high fault density components so that the testing/verification effort can be concentrated where needed. Such a strategy is expected to detect more faults and thus improve the resulting reliability of the overall system. This paper presents an alternative approach for constructing such models that is intended to fulfill specific software engineering needs (i.e. dealing with partial/incomplete information and creating models that are easy to interpret). Our approach to classification is as follows: (1) to measure the software system to be considered; and (2) to build multivariate stochastic models for prediction. We present experimental results obtained by classifying FORTRAN components developed at the NASA/GSFC into two fault density classes: low and high. Also we evaluate the accuracy of the model and the insights it provides into the software process.

FNAS/summer faculty fellowship research continuation program. Task 6: Integrated model development for liquid fueled rocket propulsion systems. Task 9: Aspects of model-based rocket engine condition monitoring and control

NASA Technical Reports Server (NTRS)

Santi, L. Michael; Helmicki, Arthur J.

1993-01-01

The objective of Phase I of this research effort was to develop an advanced mathematical-empirical model of SSME steady-state performance. Task 6 of Phase I is to develop component specific modification strategy for baseline case influence coefficient matrices. This report describes the background of SSME performance characteristics and provides a description of the control variable basis of three different gains models. The procedure used to establish influence coefficients for each of these three models is also described. Gains model analysis results are compared to Rocketdyne's power balance model (PBM).

Groundwater Pathway Model for the Los Alamos National Laboratory Technical Area 21, Material Disposal Area T

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stauffer, Philip H.; Levitt, Daniel G.; Miller, Terry Ann

2017-02-09

This report consists of four major sections, including this introductory section. Section 2 provides an overview of previous investigations related to the development of the current sitescale model. The methods and data used to develop the 3-D groundwater model and the techniques used to distill that model into a form suitable for use in the GoldSim models are discussed in Section 3. Section 4 presents the results of the model development effort and discusses some of the uncertainties involved. Three attachments that provide details about the components and data used in this groundwater pathway model are also included with thismore » report.« less

Understanding Activist Leadership Effort in the Movement Opposing Drinking and Driving

PubMed Central

Dorius, Cassandra R.; McCarthy, John D.

2012-01-01

Why do some social movement leaders work harder than others? And, how does gender affect the patterns we uncover? Utilizing historical case study evidence of local chapters in the emerging movement opposing drinking and driving we are able to develop and test theoretical expectations about predictors of weekly effort among MADD and RID leaders. Taken together, our model explains 45 percent of the variation in leadership effort. We find bureaucratic complexity and victim support activities are more powerful predictors of effort than are individual leader characteristics, although all are important. Further analysis reveals that gender almost wholly conditions the strong effect of bureaucratic complexity on leadership effort so that increasingly complex chapter structures are associated with substantial increases in work hours for women but not men. PMID:22993454

UPDATE ON DEVELOPMENT OF NUDGING FDDA FOR ADVANCED RESEARCH WRF

EPA Science Inventory

A nudging-based four-dimensional data assimilation (FDDA) system is being developed for the Weather Research and Forecasting (WRF) Model. This effort represents a collaboration between The Pennsylvania State University (i.e., Penn State), the National Center for Atmospheric Rese...

Development of safety performance functions for North Carolina.

DOT National Transportation Integrated Search

2011-12-06

"The objective of this effort is to develop safety performance functions (SPFs) for different types of facilities in North Carolina : and illustrate how they can be used to improve the decision making process. The prediction models in Part C of the H...

CAROLINA CENTER FOR COMPUTATIONAL TOXICOLOGY

EPA Science Inventory

The Center will advance the field of computational toxicology through the development of new methods and tools, as well as through collaborative efforts. In each Project, new computer-based models will be developed and published that represent the state-of-the-art. The tools p...

An Update on Experimental Climate Prediction and Analysis Products Being Developed at NASA's Global Modeling and Assimilation Office

NASA Technical Reports Server (NTRS)

Schubert, Siegfried

2011-01-01

The Global Modeling and Assimilation Office at NASA's Goddard Space Flight Center is developing a number of experimental prediction and analysis products suitable for research and applications. The prediction products include a large suite of subseasonal and seasonal hindcasts and forecasts (as a contribution to the US National MME), a suite of decadal (10-year) hindcasts (as a contribution to the IPCC decadal prediction project), and a series of large ensemble and high resolution simulations of selected extreme events, including the 2010 Russian and 2011 US heat waves. The analysis products include an experimental atlas of climate (in particular drought) and weather extremes. This talk will provide an update on those activities, and discuss recent efforts by WCRP to leverage off these and similar efforts at other institutions throughout the world to develop an experimental global drought early warning system.

Vaccines: an ongoing promise?

PubMed

Alsahli, M; Farrell, R J; Michetti, P

2001-01-01

Over the past decade, intensive research has focused on developing a vaccine therapy for Helicobacter pylori. Substantial unresolved questions cloud the current approach, and the development of a vaccine against this unique organism has proved very challenging. Many candidate vaccines have been tested in animal models. The immunogenicity and the safety of some vaccine formulations have been recently evaluated through clinical trials, and the efficacy of these vaccine therapies in humans will be determined in the near future. This article will provide an overview of the current knowledge of natural and vaccine-induced immune responses to H. pylori infection. It will also review past vaccine successes and failures in animal models and the limited experience to date in using vaccine therapy in humans. Several obstacles to H. pylori vaccine development efforts along with the future direction of these efforts will be discussed. Copyright 2001 S. Karger AG, Basel

Analysis Methods for Progressive Damage of Composite Structures

NASA Technical Reports Server (NTRS)

Rose, Cheryl A.; Davila, Carlos G.; Leone, Frank A.

2013-01-01

This document provides an overview of recent accomplishments and lessons learned in the development of general progressive damage analysis methods for predicting the residual strength and life of composite structures. These developments are described within their State-of-the-Art (SoA) context and the associated technology barriers. The emphasis of the authors is on developing these analysis tools for application at the structural level. Hence, modeling of damage progression is undertaken at the mesoscale, where the plies of a laminate are represented as a homogenous orthotropic continuum. The aim of the present effort is establish the ranges of validity of available models, to identify technology barriers, and to establish the foundations of the future investigation efforts. Such are the necessary steps towards accurate and robust simulations that can replace some of the expensive and time-consuming "building block" tests that are currently required for the design and certification of aerospace structures.

Carbon-Phenolic Cages for High-Speed Bearings. Part III - Development of Numerical Models for Heat Generation and Temperature Prediction in Lightly Lubricated Bearings

DTIC Science & Technology

2003-01-01

the overall effort. Mr. Wei Shih of Allcomp , Inc ., City of Industry, CA, provided the mechanical and thermal property data for the carbon -phenolic...AFRL-PR-WP-TR-2003-2033 CARBON -PHENOLIC CAGES FOR HIGH-SPEED BEARINGS Part III – Development of Numerical Models for Heat Generation and...NUMBER In-house 5b. GRANT NUMBER 4. TITLE AND SUBTITLE CARBON -PHENOLIC CAGES FOR HIGH-SPEED BEARINGS Part III – Development of Numerical Models

A visiting scientist program in atmospheric sciences for the Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Davis, M. H.

1989-01-01

A visiting scientist program was conducted in the atmospheric sciences and related areas at the Goddard Laboratory for Atmospheres. Research was performed in mathematical analysis as applied to computer modeling of the atmospheres; development of atmospheric modeling programs; analysis of remotely sensed atmospheric, surface, and oceanic data and its incorporation into atmospheric models; development of advanced remote sensing instrumentation; and related research areas. The specific research efforts are detailed by tasks.

The Development of a Modelling Solution to Address Manpower and Personnel Issues Using the IPME

DTIC Science & Technology

2010-11-01

training for a military system. It deals with the number of personnel spaces and available people. One of the main concerns in this domain is to...are often addressed by examining existing solutions for similar systems and/or a trial-and-error method based on human-in- the -loop tests. Such an...significant effort and resources on the development of a human performance modelling software, the Integrated Performance Modelling Environment (IPME

Numerical description of cavitation on axisymmetric bodies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hickox, C.E.; Hailey, C.E.; Wolfe, W.P.

1988-01-01

This paper reports on ongoing studies which are directed toward the development of predictive techniques for the modeling of steady cavitation on axisymmetric bodies. The primary goal of the modeling effort is the prediction of cavity shape and pressure distribution from which forces and moments can be calculated. Here we present an overview of the modeling techniques developed and compare predictions with experimental data obtained from water tunnel tests for both limited and supercavitation. 14 refs., 4 figs.

Perspectives on model forecasts of the 2014-2015 Ebola epidemic in West Africa: lessons and the way forward.

PubMed

Chowell, Gerardo; Viboud, Cécile; Simonsen, Lone; Merler, Stefano; Vespignani, Alessandro

2017-03-01

The unprecedented impact and modeling efforts associated with the 2014-2015 Ebola epidemic in West Africa provides a unique opportunity to document the performances and caveats of forecasting approaches used in near-real time for generating evidence and to guide policy. A number of international academic groups have developed and parameterized mathematical models of disease spread to forecast the trajectory of the outbreak. These modeling efforts often relied on limited epidemiological data to derive key transmission and severity parameters, which are needed to calibrate mechanistic models. Here, we provide a perspective on some of the challenges and lessons drawn from these efforts, focusing on (1) data availability and accuracy of early forecasts; (2) the ability of different models to capture the profile of early growth dynamics in local outbreaks and the importance of reactive behavior changes and case clustering; (3) challenges in forecasting the long-term epidemic impact very early in the outbreak; and (4) ways to move forward. We conclude that rapid availability of aggregated population-level data and detailed information on a subset of transmission chains is crucial to characterize transmission patterns, while ensemble-forecasting approaches could limit the uncertainty of any individual model. We believe that coordinated forecasting efforts, combined with rapid dissemination of disease predictions and underlying epidemiological data in shared online platforms, will be critical in optimizing the response to current and future infectious disease emergencies.

Developing recreational harvest regulations for an unexploited lake trout population

USGS Publications Warehouse

Lenker, Melissa A; Weidel, Brian C.; Jensen, Olaf P.; Solomon, Christopher T.

2016-01-01

Developing fishing regulations for previously unexploited populations presents numerous challenges, many of which stem from a scarcity of baseline information about abundance, population productivity, and expected angling pressure. We used simulation models to test the effect of six management strategies (catch and release; trophy, minimum, and maximum length limits; and protected and exploited slot length limits) on an unexploited population of Lake Trout Salvelinus namaycush in Follensby Pond, a 393-ha lake located in New York State’s Adirondack Park. We combined field and literature data and mark–recapture abundance estimates to parameterize an age-structured population model and used the model to assess the effects of each management strategy on abundance, catch per unit effort (CPUE), and harvest over a range of angler effort (0–2,000 angler-days/year). Lake Trout density (3.5 fish/ha for fish ≥ age 13, the estimated age at maturity) was similar to densities observed in other unexploited systems, but growth rate was relatively slow. Maximum harvest occurred at levels of effort ≤ 1,000 angler-days/year in all the scenarios considered. Regulations that permitted harvest of large postmaturation fish, such as New York’s standard Lake Trout minimum size limit or a trophy size limit, resulted in low harvest and high angler CPUE. Regulations that permitted harvest of small and sometimes immature fish, such as a protected slot or maximum size limit, allowed high harvest but resulted in low angler CPUE and produced rapid declines in harvest with increases in effort beyond the effort consistent with maximum yield. Management agencies can use these results to match regulations to management goals and to assess the risks of different management options for unexploited Lake Trout populations and other fish species with similar life history traits.

Knowledge-based approach for generating target system specifications from a domain model

NASA Technical Reports Server (NTRS)

Gomaa, Hassan; Kerschberg, Larry; Sugumaran, Vijayan

1992-01-01

Several institutions in industry and academia are pursuing research efforts in domain modeling to address unresolved issues in software reuse. To demonstrate the concepts of domain modeling and software reuse, a prototype software engineering environment is being developed at George Mason University to support the creation of domain models and the generation of target system specifications. This prototype environment, which is application domain independent, consists of an integrated set of commercial off-the-shelf software tools and custom-developed software tools. This paper describes the knowledge-based tool that was developed as part of the environment to generate target system specifications from a domain model.

Operations and support cost modeling of conceptual space vehicles

NASA Technical Reports Server (NTRS)

Ebeling, Charles

1994-01-01

The University of Dayton is pleased to submit this annual report to the National Aeronautics and Space Administration (NASA) Langley Research Center which documents the development of an operations and support (O&S) cost model as part of a larger life cycle cost (LCC) structure. It is intended for use during the conceptual design of new launch vehicles and spacecraft. This research is being conducted under NASA Research Grant NAG-1-1327. This research effort changes the focus from that of the first two years in which a reliability and maintainability model was developed to the initial development of an operations and support life cycle cost model. Cost categories were initially patterned after NASA's three axis work breakdown structure consisting of a configuration axis (vehicle), a function axis, and a cost axis. A revised cost element structure (CES), which is currently under study by NASA, was used to established the basic cost elements used in the model. While the focus of the effort was on operations and maintenance costs and other recurring costs, the computerized model allowed for other cost categories such as RDT&E and production costs to be addressed. Secondary tasks performed concurrent with the development of the costing model included support and upgrades to the reliability and maintainability (R&M) model. The primary result of the current research has been a methodology and a computer implementation of the methodology to provide for timely operations and support cost analysis during the conceptual design activities.

Open Source Molecular Modeling

PubMed Central

Pirhadi, Somayeh; Sunseri, Jocelyn; Koes, David Ryan

2016-01-01

The success of molecular modeling and computational chemistry efforts are, by definition, dependent on quality software applications. Open source software development provides many advantages to users of modeling applications, not the least of which is that the software is free and completely extendable. In this review we categorize, enumerate, and describe available open source software packages for molecular modeling and computational chemistry. PMID:27631126

Terrestrial implications of mathematical modeling developed for space biomedical research

NASA Technical Reports Server (NTRS)

Lujan, Barbara F.; White, Ronald J.; Leonard, Joel I.; Srinivasan, R. Srini

1988-01-01

This paper summarizes several related research projects supported by NASA which seek to apply computer models to space medicine and physiology. These efforts span a wide range of activities, including mathematical models used for computer simulations of physiological control systems; power spectral analysis of physiological signals; pattern recognition models for detection of disease processes; and computer-aided diagnosis programs.

Developing and Testing a Model to Predict Outcomes of Organizational Change

PubMed Central

Gustafson, David H; Sainfort, François; Eichler, Mary; Adams, Laura; Bisognano, Maureen; Steudel, Harold

2003-01-01

Objective To test the effectiveness of a Bayesian model employing subjective probability estimates for predicting success and failure of health care improvement projects. Data Sources Experts' subjective assessment data for model development and independent retrospective data on 221 healthcare improvement projects in the United States, Canada, and the Netherlands collected between 1996 and 2000 for validation. Methods A panel of theoretical and practical experts and literature in organizational change were used to identify factors predicting the outcome of improvement efforts. A Bayesian model was developed to estimate probability of successful change using subjective estimates of likelihood ratios and prior odds elicited from the panel of experts. A subsequent retrospective empirical analysis of change efforts in 198 health care organizations was performed to validate the model. Logistic regression and ROC analysis were used to evaluate the model's performance using three alternative definitions of success. Data Collection For the model development, experts' subjective assessments were elicited using an integrative group process. For the validation study, a staff person intimately involved in each improvement project responded to a written survey asking questions about model factors and project outcomes. Results Logistic regression chi-square statistics and areas under the ROC curve demonstrated a high level of model performance in predicting success. Chi-square statistics were significant at the 0.001 level and areas under the ROC curve were greater than 0.84. Conclusions A subjective Bayesian model was effective in predicting the outcome of actual improvement projects. Additional prospective evaluations as well as testing the impact of this model as an intervention are warranted. PMID:12785571

A meta-model for computer executable dynamic clinical safety checklists.

PubMed

Nan, Shan; Van Gorp, Pieter; Lu, Xudong; Kaymak, Uzay; Korsten, Hendrikus; Vdovjak, Richard; Duan, Huilong

2017-12-12

Safety checklist is a type of cognitive tool enforcing short term memory of medical workers with the purpose of reducing medical errors caused by overlook and ignorance. To facilitate the daily use of safety checklists, computerized systems embedded in the clinical workflow and adapted to patient-context are increasingly developed. However, the current hard-coded approach of implementing checklists in these systems increase the cognitive efforts of clinical experts and coding efforts for informaticists. This is due to the lack of a formal representation format that is both understandable by clinical experts and executable by computer programs. We developed a dynamic checklist meta-model with a three-step approach. Dynamic checklist modeling requirements were extracted by performing a domain analysis. Then, existing modeling approaches and tools were investigated with the purpose of reusing these languages. Finally, the meta-model was developed by eliciting domain concepts and their hierarchies. The feasibility of using the meta-model was validated by two case studies. The meta-model was mapped to specific modeling languages according to the requirements of hospitals. Using the proposed meta-model, a comprehensive coronary artery bypass graft peri-operative checklist set and a percutaneous coronary intervention peri-operative checklist set have been developed in a Dutch hospital and a Chinese hospital, respectively. The result shows that it is feasible to use the meta-model to facilitate the modeling and execution of dynamic checklists. We proposed a novel meta-model for the dynamic checklist with the purpose of facilitating creating dynamic checklists. The meta-model is a framework of reusing existing modeling languages and tools to model dynamic checklists. The feasibility of using the meta-model is validated by implementing a use case in the system.

A CMMI-based approach for medical software project life cycle study.

PubMed

Chen, Jui-Jen; Su, Wu-Chen; Wang, Pei-Wen; Yen, Hung-Chi

2013-01-01

In terms of medical techniques, Taiwan has gained international recognition in recent years. However, the medical information system industry in Taiwan is still at a developing stage compared with the software industries in other nations. In addition, systematic development processes are indispensable elements of software development. They can help developers increase their productivity and efficiency and also avoid unnecessary risks arising during the development process. Thus, this paper presents an application of Light-Weight Capability Maturity Model Integration (LW-CMMI) to Chang Gung Medical Research Project (CMRP) in the Nuclear medicine field. This application was intended to integrate user requirements, system design and testing of software development processes into three layers (Domain, Concept and Instance) model. Then, expressing in structural System Modeling Language (SysML) diagrams and converts part of the manual effort necessary for project management maintenance into computational effort, for example: (semi-) automatic delivery of traceability management. In this application, it supports establishing artifacts of "requirement specification document", "project execution plan document", "system design document" and "system test document", and can deliver a prototype of lightweight project management tool on the Nuclear Medicine software project. The results of this application can be a reference for other medical institutions in developing medical information systems and support of project management to achieve the aim of patient safety.

Overview of NASA Multi-dimensional Stirling Convertor Code Development and Validation Effort

NASA Technical Reports Server (NTRS)

Tew, Roy C.; Cairelli, James E.; Ibrahim, Mounir B.; Simon, Terrence W.; Gedeon, David

2002-01-01

A NASA grant has been awarded to Cleveland State University (CSU) to develop a multi-dimensional (multi-D) Stirling computer code with the goals of improving loss predictions and identifying component areas for improvements. The University of Minnesota (UMN) and Gedeon Associates are teamed with CSU. Development of test rigs at UMN and CSU and validation of the code against test data are part of the effort. The one-dimensional (1-D) Stirling codes used for design and performance prediction do not rigorously model regions of the working space where abrupt changes in flow area occur (such as manifolds and other transitions between components). Certain hardware experiences have demonstrated large performance gains by varying manifolds and heat exchanger designs to improve flow distributions in the heat exchangers. 1-D codes were not able to predict these performance gains. An accurate multi-D code should improve understanding of the effects of area changes along the main flow axis, sensitivity of performance to slight changes in internal geometry, and, in general, the understanding of various internal thermodynamic losses. The commercial CFD-ACE code has been chosen for development of the multi-D code. This 2-D/3-D code has highly developed pre- and post-processors, and moving boundary capability. Preliminary attempts at validation of CFD-ACE models of MIT gas spring and "two space" test rigs were encouraging. Also, CSU's simulations of the UMN oscillating-flow fig compare well with flow visualization results from UMN. A complementary Department of Energy (DOE) Regenerator Research effort is aiding in development of regenerator matrix models that will be used in the multi-D Stirling code. This paper reports on the progress and challenges of this

NASA's Hall Thruster Program

NASA Technical Reports Server (NTRS)

Jankovsky, Robert S.; Jacobson, David T.; Rawlin, Vincent K.; Mason, Lee S.; Mantenieks, Maris A.; Manzella, David H.; Hofer, Richard R.; Peterson, Peter Y.

2001-01-01

NASA's Hall thruster program has base research and focused development efforts in support of the Advanced Space Transportation Program, Space-Based Program, and various other programs. The objective of the base research is to gain an improved understanding of the physical processes and engineering constraints of Hall thrusters to enable development of advanced Hall thruster designs. Specific technical questions that are current priorities of the base effort are: (1) How does thruster life vary with operating point? (2) How can thruster lifetime and wear rate be most efficiently evaluated? (3) What are the practical limitations for discharge voltage as it pertains to high specific impulse operation (high discharge voltage) and high thrust operation (low discharge voltage)? (4) What are the practical limits for extending Hall thrusters to very high input powers? and (5) What can be done during thruster design to reduce cost and integration concerns? The objective of the focused development effort is to develop a 50 kW-class Hall propulsion system, with a milestone of a 50 kW engineering model thruster/system by the end of program year 2006. Specific program wear 2001 efforts, along with the corporate and academic participation, are described.

Statement of Rear Admiral Nevin P. Carr, Jr., United States Navy Chief of Naval Research before the Terrorism, Unconventional Threats and Capabilities Subcommittee of the House Armed Services Committee on The Fiscal year 2011 Budget Request

DTIC Science & Technology

2010-03-23

foundation of our S&T portfolio by developing a broad base of scientific knowledge from which INP, FNC, and quick reaction efforts are generated...optimally tailoring experiences, in real-time, to current cognitive and physiological states of the learner. A unique human systems design approach is...efforts include modeling human responses to blast, ballistic, and blunt trauma, as well as modeling physical and cognitive effects of blast exposure and

Advancing Consumer Product Composition and Chemical ...

EPA Pesticide Factsheets

This presentation describes EPA efforts to collect, model, and measure publically available consumer product data for use in exposure assessment. The development of the ORD Chemicals and Products database will be described, as will machine-learning based models for predicting chemical function. Finally, the talk describes new mass spectrometry-based methods for measuring chemicals in formulation and articles. This presentation is an invited talk to the ICCA-LRI workshop "Fit-For-Purpose Exposure Assessments For Risk-Based Decision Making". The talk will share EPA efforts to characterize the components of consumer products for use in exposure assessment with the international exposure science community.

FPA Depot - Web Application

NASA Technical Reports Server (NTRS)

Avila, Edwin M. Martinez; Muniz, Ricardo; Szafran, Jamie; Dalton, Adam

2011-01-01

Lines of code (LOC) analysis is one of the methods used to measure programmer productivity and estimate schedules of programming projects. The Launch Control System (LCS) had previously used this method to estimate the amount of work and to plan development efforts. The disadvantage of using LOC as a measure of effort is that one can only measure 30% to 35% of the total effort of software projects involves coding [8]. In the application, instead of using the LOC we are using function point for a better estimation of hours in each software to develop. Because of these disadvantages, Jamie Szafran of the System Software Branch of Control And Data Systems (NE-C3) at Kennedy Space Canter developed a web application called Function Point Analysis (FPA) Depot. The objective of this web application is that the LCS software architecture team can use the data to more accurately estimate the effort required to implement customer requirements. This paper describes the evolution of the domain model used for function point analysis as project managers continually strive to generate more accurate estimates.

Modeling and analysis of chill and fill processes for the cryogenic storage and transfer engineering development unit tank

NASA Astrophysics Data System (ADS)

Hedayat, A.; Cartagena, W.; Majumdar, A. K.; LeClair, A. C.

2016-03-01

NASA's future missions may require long-term storage and transfer of cryogenic propellants. The Engineering Development Unit (EDU), a NASA in-house effort supported by both Marshall Space Flight Center (MSFC) and Glenn Research Center, is a cryogenic fluid management (CFM) test article that primarily serves as a manufacturing pathfinder and a risk reduction task for a future CFM payload. The EDU test article comprises a flight-like tank, internal components, insulation, and attachment struts. The EDU is designed to perform integrated passive thermal control performance testing with liquid hydrogen (LH2) in a test-like vacuum environment. A series of tests, with LH2 as a testing fluid, was conducted at Test Stand 300 at MSFC during the summer of 2014. The objective of this effort was to develop a thermal/fluid model for evaluating the thermodynamic behavior of the EDU tank during the chill and fill processes. The Generalized Fluid System Simulation Program, an MSFC in-house general-purpose computer program for flow network analysis, was utilized to model and simulate the chill and fill portion of the testing. The model contained the LH2 supply source, feed system, EDU tank, and vent system. The test setup, modeling description, and comparison of model predictions with the test data are presented.

Long-Term Durability Analysis of a 100,000+ Hr Stirling Power Convertor Heater Head

NASA Technical Reports Server (NTRS)

Bartolotta, Paul A.; Bowman, Randy R.; Krause, David L.; Halford, Gary R.

2000-01-01

DOE and NASA have identified Stirling Radioisotope Power Systems (SRPS) as the power supply for deep space exploration missions the Europa Orbiter and Solar Probe. As a part of this effort, NASA has initiated a long-term durability project for critical hot section components of the Stirling power convertor to qualify flight hardware. This project will develop a life prediction methodology that utilizes short-term (t < 20,000 hr) test data to verify long-term (t > 100,000 hr) design life. The project consists of generating a materials database for the specific heat of alloy, evaluation of critical hermetic sealed joints, life model characterization, and model verification. This paper will describe the qualification methodology being developed and provide a status for this effort.

Improved Mental Acuity Forecasting with an Individualized Quantitative Sleep Model.

PubMed

Winslow, Brent D; Nguyen, Nam; Venta, Kimberly E

2017-01-01

Sleep impairment significantly alters human brain structure and cognitive function, but available evidence suggests that adults in developed nations are sleeping less. A growing body of research has sought to use sleep to forecast cognitive performance by modeling the relationship between the two, but has generally focused on vigilance rather than other cognitive constructs affected by sleep, such as reaction time, executive function, and working memory. Previous modeling efforts have also utilized subjective, self-reported sleep durations and were restricted to laboratory environments. In the current effort, we addressed these limitations by employing wearable systems and mobile applications to gather objective sleep information, assess multi-construct cognitive performance, and model/predict changes to mental acuity. Thirty participants were recruited for participation in the study, which lasted 1 week. Using the Fitbit Charge HR and a mobile version of the automated neuropsychological assessment metric called CogGauge, we gathered a series of features and utilized the unified model of performance to predict mental acuity based on sleep records. Our results suggest that individuals poorly rate their sleep duration, supporting the need for objective sleep metrics to model circadian changes to mental acuity. Participant compliance in using the wearable throughout the week and responding to the CogGauge assessments was 80%. Specific biases were identified in temporal metrics across mobile devices and operating systems and were excluded from the mental acuity metric development. Individualized prediction of mental acuity consistently outperformed group modeling. This effort indicates the feasibility of creating an individualized, mobile assessment and prediction of mental acuity, compatible with the majority of current mobile devices.

Analysis of structural dynamic data from Skylab. Volume 1: Technical discussion

NASA Technical Reports Server (NTRS)

Demchak, L.; Harcrow, H.

1976-01-01

A compendium of Skylab structural dynamics analytical and test programs is presented. These programs are assessed to identify lessons learned from the structural dynamic prediction effort and to provide guidelines for future analysts and program managers of complex spacecraft systems. It is a synopsis of the structural dynamic effort performed under the Skylab Integration contract and specifically covers the development, utilization, and correlation of Skylab Dynamic Orbital Models.

Berkeley's New Approach to Global Engagement: Early and Current Efforts to Become More International. Research & Occasional Paper Series: CSHE.12.15

ERIC Educational Resources Information Center

Dirks, Nicholas B.; Gilman, Nils

2015-01-01

This essay discusses past and current thinking about the globalization of higher education (from a U.S. point of view in particular) and a new model we are attempting to develop at the University of California, Berkeley. This essay begins with a brief narrative of the historical evolution of efforts to internationalize education, from the…

Parental involvement, child effort, and the development of immigrant boys’ and girls’ reading and mathematics skills: A latent difference score growth model

PubMed Central

Moon, Ui Jeong; Hofferth, Sandra L.

2016-01-01

Gender differences in elementary school performance among immigrant children have not yet been well documented. This study examined how differences in parental involvement, child effort, and family characteristics and resources contribute to immigrant boys’-and girls’ academic achievement from kindergarten through 5th-grade. The sample was drawn from the Early Childhood Longitudinal Study-Kindergarten cohort. Using a latent score growth model, this study found that parents’ involvement at home benefited boys’ reading and mathematics skills throughout all early elementary school years, but did not have the same benefit for girls. For both boys and girls, child effort in reading appears to be strongly linked to better reading and mathematics skills at kindergarten and to subsequent improvement between grades. The positive associations of parental involvement and child’s effort with test scores were greater during earlier years than during later years for boys, whereas there was no difference in the association over time for girls. PMID:26900304

Psychosocial work environment and the risk of coronary heart disease.

PubMed

Peter, R; Siegrist, J

2000-06-01

Remarkable changes in the working situation have led to the increasing importance of psychomentally and socio-emotionally demanding conditions at work. With the help of theoretical models, those highly prevalent psychosocial work environments were conceptualized which influence the risk of coronary heart disease by enhanced activation of the autonomic nervous system. One of the most prominent theoretical approaches, the job strain model, and a more recent approach, the effort-reward imbalance model, are discussed in the paper. Findings from prospective and cross-sectional studies indicate that job strain and effort-reward imbalance at work define specific conditions of chronic work stress that are associated with an elevated risk of coronary heart disease (CHD). Respective multivariate odds-ratios range from 1.2 to 5.0 with respect to job strain, and from 1.5 to 6.1 with respect to effort-reward imbalance. These associations are explained neither by established behavioral or biomedical risk factors nor by physical and chemical hazards at work, rather they define independent, new work-related risk conditions. There is additional evidence that effort-reward imbalance may mediate the association of some traditional occupational exposures, such as shift work, with cardiovascular risk: in a cross-sectional study, prevalence odds ratios of hypertension and atherogenic lipids attributable to effort-reward imbalance were relatively highest among shiftworkers as compared to daytime workers. Preliminary results from intervention programs based on the theoretical models document favorable effects on health. Information derived from theoretical models on psychosocial work environment may help to better identify populations at risk and to develop and apply specific, theory-guided preventive activities in the future.

Working Group 1: Software System Design and Implementation for Environmental Modeling (presentation)

EPA Science Inventory

Background: Nine Federal agencies have been cooperating under a Memorandum of Understanding (MOU) on the research and development of multimedia environmental models. The MOU, which was revised in 2012, continues an effort that began in 2001. It establishes a framework for facilit...

Predicting field weed emergence with empirical models and soft computing techniques

USDA-ARS?s Scientific Manuscript database

Seedling emergence is the most important phenological process that influences the success of weed species; therefore, predicting weed emergence timing plays a critical role in scheduling weed management measures. Important efforts have been made in the attempt to develop models to predict seedling e...

Aviation system modeling study and alternatives

NASA Technical Reports Server (NTRS)

1975-01-01

The Aviation System Modeling Study was directed toward two primary goals: an improved understanding of the U.S. aviation system, and technology. There are three major categories into which the individual study efforts may be subdivided. These three categories are: special issue studies, task studies, and data base development.

Advancing Consumer Product Composition and Chemical Use Information to Facilitate Risk-Based Decision Making

EPA Science Inventory

This presentation describes EPA efforts to collect, model, and measure publically available consumer product data for use in exposure assessment. The development of the ORD Chemicals and Products database will be described, as will machine-learning based models for predicting ch...

A TRAINING MODEL FOR THE JOBLESS ADULT.

ERIC Educational Resources Information Center

ULRICH, BERNARD

THE TRAINING SYSTEMS DESIGN, AN INTERDISCIPLINARY APPROACH UTILIZING KNOWLEDGE OF BEHAVIORAL SCIENCES, NEW INSTRUCTIONAL TECHNOLOGY, AND SYSTEMS DESIGN, HAS BEEN APPLIED TO DEVELOP A MODEL FOR RE-EDUCATING AND TRAINING THE AGING UNEMPLOYED. RESEARCH INTO EXISTING MDTA DEMONSTRATION PROGRAMS BY THE COOPERATIVE EFFORTS OF MCGRAW-HILL AND THE…

Combining inferences from models of capture efficiency, detectability, and suitable habitat to classify landscapes for conservation of threatened bull trout

USGS Publications Warehouse

Peterson, J.; Dunham, J.B.

2003-01-01

Effective conservation efforts for at-risk species require knowledge of the locations of existing populations. Species presence can be estimated directly by conducting field-sampling surveys or alternatively by developing predictive models. Direct surveys can be expensive and inefficient, particularly for rare and difficult-to-sample species, and models of species presence may produce biased predictions. We present a Bayesian approach that combines sampling and model-based inferences for estimating species presence. The accuracy and cost-effectiveness of this approach were compared to those of sampling surveys and predictive models for estimating the presence of the threatened bull trout ( Salvelinus confluentus ) via simulation with existing models and empirical sampling data. Simulations indicated that a sampling-only approach would be the most effective and would result in the lowest presence and absence misclassification error rates for three thresholds of detection probability. When sampling effort was considered, however, the combined approach resulted in the lowest error rates per unit of sampling effort. Hence, lower probability-of-detection thresholds can be specified with the combined approach, resulting in lower misclassification error rates and improved cost-effectiveness.

An investigation of error characteristics and coding performance

NASA Technical Reports Server (NTRS)

Ebel, William J.; Ingels, Frank M.

1993-01-01

The first year's effort on NASA Grant NAG5-2006 was an investigation to characterize typical errors resulting from the EOS dorn link. The analysis methods developed for this effort were used on test data from a March 1992 White Sands Terminal Test. The effectiveness of a concatenated coding scheme of a Reed Solomon outer code and a convolutional inner code versus a Reed Solomon only code scheme has been investigated as well as the effectiveness of a Periodic Convolutional Interleaver in dispersing errors of certain types. The work effort consisted of development of software that allows simulation studies with the appropriate coding schemes plus either simulated data with errors or actual data with errors. The software program is entitled Communication Link Error Analysis (CLEAN) and models downlink errors, forward error correcting schemes, and interleavers.

Geoinformatics 2007: data to knowledge

USGS Publications Warehouse

Brady, Shailaja R.; Sinha, A. Krishna; Gundersen, Linda C.

2007-01-01

Geoinformatics is the term used to describe a variety of efforts to promote collaboration between the computer sciences and the geosciences to solve complex scientific questions. It refers to the distributed, integrated digital information system and working environment that provides innovative means for the study of the Earth systems, as well as other planets, through use of advanced information technologies. Geoinformatics activities range from major research and development efforts creating new technologies to provide high-quality, sustained production-level services for data discovery, integration and analysis, to small, discipline-specific efforts that develop earth science data collections and data analysis tools serving the needs of individual communities. The ultimate vision of Geoinformatics is a highly interconnected data system populated with high quality, freely available data, as well as, a robust set of software for analysis, visualization, and modeling.

Use of an Existing Airborne Radon Data Base in the Verification of the NASA/AEAP Core Model

NASA Technical Reports Server (NTRS)

Kritz, Mark A.

1998-01-01

The primary objective of this project was to apply the tropospheric atmospheric radon (Rn222) measurements to the development and verification of the global 3-D atmospheric chemical transport model under development by NASA's Atmospheric Effects of Aviation Project (AEAP). The AEAP project had two principal components: (1) a modeling effort, whose goal was to create, test and apply an elaborate three-dimensional atmospheric chemical transport model (the NASA/AEAP Core model to an evaluation of the possible short and long-term effects of aircraft emissions on atmospheric chemistry and climate--and (2) a measurement effort, whose goal was to obtain a focused set of atmospheric measurements that would provide some of the observational data used in the modeling effort. My activity in this project was confined to the first of these components. Both atmospheric transport and atmospheric chemical reactions (as well the input and removal of chemical species) are accounted for in the NASA/AEAP Core model. Thus, for example, in assessing the effect of aircraft effluents on the chemistry of a given region of the upper troposphere, the model must keep track not only of the chemical reactions of the effluent species emitted by aircraft flying in this region, but also of the transport into the region of these (and other) species from other, remote sources--for example, via the vertical convection of boundary layer air to the upper troposphere. Radon, because of its known surface source and known radioactive half-life, and freedom from chemical production or loss, and from removal from the atmosphere by physical scavenging, is a recognized and valuable tool for testing the transport components of global transport and circulation models.

Advancing Models and Data for Characterizing Exposures to Chemicals in Consumer Products

EPA Science Inventory

EPA’s Office of Research and Development (ORD) is leading several efforts to develop data and methods for estimating population chemical exposures related to the use of consumer products. New curated chemical, ingredient, and product use information are being collected fro...

Maine's Employability Skills Program

ERIC Educational Resources Information Center

McMahon, John M.; Wolffe, Karen E.; Wolfe, Judy; Brooker, Carrie

2013-01-01

This Practice Report describes the development and implementation of the "Maine Employability Skills Program," a model employment program developed by the Maine Division for the Blind and Visually Impaired (DBVI). The program was designed to support the efforts of the chronically unemployed or underemployed. These consumers were either…

COASTAL EUTROPHICATION MONITORING FOR RESEARCH AND MANAGEMENT

EPA Science Inventory

The US EPA=s Atlantic Ecology Division (AED) has embarked on a multi-year research program aimed at developing empirical nitrogen load-response models for small well-flushed embayments in southern New England. This is part of a national EPA effort to develop nutrient load-respon...

Recent advances in estimating protein and energy requirements of ruminants

USDA-ARS?s Scientific Manuscript database

Considerable efforts have been made in gathering scientific data and developing feeding systems for ruminant animals in the last 50 years. Future endeavours should target the assessment, interpretation, and integration of the accumulated knowledge to develop nutrition models in a holistic and pragma...

High Performance Computing for Modeling Wind Farms and Their Impact

NASA Astrophysics Data System (ADS)

Mavriplis, D.; Naughton, J. W.; Stoellinger, M. K.

2016-12-01

As energy generated by wind penetrates further into our electrical system, modeling of power production, power distribution, and the economic impact of wind-generated electricity is growing in importance. The models used for this work can range in fidelity from simple codes that run on a single computer to those that require high performance computing capabilities. Over the past several years, high fidelity models have been developed and deployed on the NCAR-Wyoming Supercomputing Center's Yellowstone machine. One of the primary modeling efforts focuses on developing the capability to compute the behavior of a wind farm in complex terrain under realistic atmospheric conditions. Fully modeling this system requires the simulation of continental flows to modeling the flow over a wind turbine blade, including down to the blade boundary level, fully 10 orders of magnitude in scale. To accomplish this, the simulations are broken up by scale, with information from the larger scales being passed to the lower scale models. In the code being developed, four scale levels are included: the continental weather scale, the local atmospheric flow in complex terrain, the wind plant scale, and the turbine scale. The current state of the models in the latter three scales will be discussed. These simulations are based on a high-order accurate dynamic overset and adaptive mesh approach, which runs at large scale on the NWSC Yellowstone machine. A second effort on modeling the economic impact of new wind development as well as improvement in wind plant performance and enhancements to the transmission infrastructure will also be discussed.

Ecological sites: A useful tool for land management

Treesearch

Alicia N. Struckhoff; Douglas Wallace; Fred Young

2017-01-01

Developing ecological sites in Missouri is a multiagency, multidiscipline effort led by the Missouri Department of Conservation and the U.S. Department of Agriculture (USDA) Natural Resources Conservation Service. The methodology developed in Missouri has recently served as a model for ecological site development across the country and has aided in an initiative to...

Linking Academic Strengths to Economic Development: Seven Habits for Effective Partnership in University-Based Economic Development.

ERIC Educational Resources Information Center

O'Brien, Gregory M. St. L.; Grace, Norma E.; Williams, Elizabeth M.; Paradise, Louis V.; Gibbs, Patrick M.

2003-01-01

Describes the University of New Orleans' Research and Technology Foundation, which relied heavily on Steven Covey's "The 7 Habits of Highly Effective People" to create an innovative model of ownership, construction, and financing to overcome paralyzing barriers to facility development. The effort has resulted in multiple development…

Rethinking the Measurement of Training and Development in the Professions: A Conceptual Model

ERIC Educational Resources Information Center

Lynch, Doug; Thomas, Chris; Green, Wendy; Gottfried, Michael; Varga, Matthew

2010-01-01

The 21st century is often called the "age of talent." Globalization has influenced both organizational processes and employee training, creating an increased need for educated, skilled, and adaptable employees. Training and development has become an integral part of most organizations' efforts to develop and maintain competitive…

Engaging Teachers as Learners: Modeling Professional Development for Adult Literacy Providers

ERIC Educational Resources Information Center

Hanna, Mary Barbara; Salzman, James A.; Reynolds, Sharon L.; Fergus, Katherine B.

2010-01-01

As professional developers for the Adult Basic Literacy Education (ABLE) system in Ohio, the authors have focused their efforts over the last several years on more actively engaging adult basic education teachers as learners in the professional development they offer. By creating activities that engage teachers in active learning with their adult…

Linkage of a Physically Based Distributed Watershed Model and a Dynamic Plant Growth Model

DTIC Science & Technology

2006-12-01

i.e., Universal Soil Loss Equation ( USLE ) factors, K, C, and P). The K, C, and P factors are empiri- cal coefficients with the same conceptual...with general ecosystem models designed to make long-term projections of ecosystem dynamics. This development effort investigated the linkage of soil ...20 EDYS soil module

Foliage Density Distribution and Prediction of Intensively Managed Loblolly Pine

Treesearch

Yujia Zhang; Bruce E. Borders; Rodney E. Will; Hector De Los Santos Posadas

2004-01-01

The pipe model theory says that foliage biomass is proportional to the sapwood area at the base of the live crown. This knowledge was incorporated in an effort to develop a foliage biomass prediction model from integrating a stipulated foliage biomass distribution function within the crown. This model was parameterized using data collected from intensively managed...

Comparison of digital elevation models for aquatic data development.

Treesearch

Sharon Clarke; Kelly Burnett

2003-01-01

Thirty-meter digital elevation models (DEMs) produced by the U.S. Geological Survey (USGS) are widely available and commonly used in analyzing aquatic systems. However, these DEMs are of relatively coarse resolution, were inconsistently produced (i.e., Level 1 versus Level 2 DEMs), and lack drainage enforcement. Such issues may hamper efforts to accurately model...

A Comparison Study of Return Ratio-Based Academic Enrollment Forecasting Models. Professional File. Article 129, Spring 2013

ERIC Educational Resources Information Center

Zan, Xinxing Anna; Yoon, Sang Won; Khasawneh, Mohammad; Srihari, Krishnaswami

2013-01-01

In an effort to develop a low-cost and user-friendly forecasting model to minimize forecasting error, we have applied average and exponentially weighted return ratios to project undergraduate student enrollment. We tested the proposed forecasting models with different sets of historical enrollment data, such as university-, school-, and…

Development of a Model for Minority Recruitment at the United States Naval Academy.

ERIC Educational Resources Information Center

Corpin, Owen D.

The study proposes a recruiting model, which is a coordinated and integrated recruiting effort employing the professional aid of the National Urban League and an expanded minority recruiting staff at the Naval Academy. The model aims to promote interest in the Academy's professional naval education among the black urban community. It is hoped this…

Towards Systematic Benchmarking of Climate Model Performance

NASA Astrophysics Data System (ADS)

Gleckler, P. J.

2014-12-01

The process by which climate models are evaluated has evolved substantially over the past decade, with the Coupled Model Intercomparison Project (CMIP) serving as a centralizing activity for coordinating model experimentation and enabling research. Scientists with a broad spectrum of expertise have contributed to the CMIP model evaluation process, resulting in many hundreds of publications that have served as a key resource for the IPCC process. For several reasons, efforts are now underway to further systematize some aspects of the model evaluation process. First, some model evaluation can now be considered routine and should not require "re-inventing the wheel" or a journal publication simply to update results with newer models. Second, the benefit of CMIP research to model development has not been optimal because the publication of results generally takes several years and is usually not reproducible for benchmarking newer model versions. And third, there are now hundreds of model versions and many thousands of simulations, but there is no community-based mechanism for routinely monitoring model performance changes. An important change in the design of CMIP6 can help address these limitations. CMIP6 will include a small set standardized experiments as an ongoing exercise (CMIP "DECK": ongoing Diagnostic, Evaluation and Characterization of Klima), so that modeling groups can submit them at any time and not be overly constrained by deadlines. In this presentation, efforts to establish routine benchmarking of existing and future CMIP simulations will be described. To date, some benchmarking tools have been made available to all CMIP modeling groups to enable them to readily compare with CMIP5 simulations during the model development process. A natural extension of this effort is to make results from all CMIP simulations widely available, including the results from newer models as soon as the simulations become available for research. Making the results from routine performance tests readily accessible will help advance a more transparent model evaluation process.

Swept-Wing Ice Accretion Characterization and Aerodynamics

NASA Technical Reports Server (NTRS)

Broeren, Andy P.; Potapczuk, Mark G.; Riley, James T.; Villedieu, Philippe; Moens, Frederic; Bragg, Michael B.

2013-01-01

NASA, FAA, ONERA, the University of Illinois and Boeing have embarked on a significant, collaborative research effort to address the technical challenges associated with icing on large-scale, three-dimensional swept wings. The overall goal is to improve the fidelity of experimental and computational simulation methods for swept-wing ice accretion formation and resulting aerodynamic effect. A seven-phase research effort has been designed that incorporates ice-accretion and aerodynamic experiments and computational simulations. As the baseline, full-scale, swept-wing-reference geometry, this research will utilize the 65% scale Common Research Model configuration. Ice-accretion testing will be conducted in the NASA Icing Research Tunnel for three hybrid swept-wing models representing the 20%, 64% and 83% semispan stations of the baseline-reference wing. Three-dimensional measurement techniques are being developed and validated to document the experimental ice-accretion geometries. Artificial ice shapes of varying geometric fidelity will be developed for aerodynamic testing over a large Reynolds number range in the ONERA F1 pressurized wind tunnel and in a smaller-scale atmospheric wind tunnel. Concurrent research will be conducted to explore and further develop the use of computational simulation tools for ice accretion and aerodynamics on swept wings. The combined results of this research effort will result in an improved understanding of the ice formation and aerodynamic effects on swept wings. The purpose of this paper is to describe this research effort in more detail and report on the current results and status to date. 1

Swept-Wing Ice Accretion Characterization and Aerodynamics

NASA Technical Reports Server (NTRS)

Broeren, Andy P.; Potapczuk, Mark G.; Riley, James T.; Villedieu, Philippe; Moens, Frederic; Bragg, Michael B.

2013-01-01

NASA, FAA, ONERA, the University of Illinois and Boeing have embarked on a significant, collaborative research effort to address the technical challenges associated with icing on large-scale, three-dimensional swept wings. The overall goal is to improve the fidelity of experimental and computational simulation methods for swept-wing ice accretion formation and resulting aerodynamic effect. A seven-phase research effort has been designed that incorporates ice-accretion and aerodynamic experiments and computational simulations. As the baseline, full-scale, swept-wing-reference geometry, this research will utilize the 65 percent scale Common Research Model configuration. Ice-accretion testing will be conducted in the NASA Icing Research Tunnel for three hybrid swept-wing models representing the 20, 64 and 83 percent semispan stations of the baseline-reference wing. Threedimensional measurement techniques are being developed and validated to document the experimental ice-accretion geometries. Artificial ice shapes of varying geometric fidelity will be developed for aerodynamic testing over a large Reynolds number range in the ONERA F1 pressurized wind tunnel and in a smaller-scale atmospheric wind tunnel. Concurrent research will be conducted to explore and further develop the use of computational simulation tools for ice accretion and aerodynamics on swept wings. The combined results of this research effort will result in an improved understanding of the ice formation and aerodynamic effects on swept wings. The purpose of this paper is to describe this research effort in more detail and report on the current results and status to date.

Toward Improved Fidelity of Thermal Explosion Simulations

NASA Astrophysics Data System (ADS)

Nichols, A. L.; Becker, R.; Howard, W. M.; Wemhoff, A.

2009-12-01

We will present results of an effort to improve the thermal/chemical/mechanical modeling of HMX based explosives like LX04 and LX10 for thermal cook-off The original HMX model and analysis scheme were developed by Yoh et al. for use in the ALE3D modeling framework. The current results were built to remedy the deficiencies of that original model. We concentrated our efforts in four areas. The first area was addition of porosity to the chemical material model framework in ALE3D that is used to model the HMX explosive formulation. This is needed to handle the roughly 2% porosity in solid explosives. The second area was the improvement of the HMX reaction network, which included a reactive phase change model base on work by Henson et al. The third area required adding early decomposition gas species to the CHEETAH material database to develop more accurate equations of state for gaseous intermediates and products. Finally, it was necessary to improve the implicit mechanics module in ALE3D to more naturally handle the long time scales associated with thermal cook-off The application of the resulting framework to the analysis of the Scaled Thermal Explosion (STEX) experiments will be discussed.

HALOE Algorithm Improvements for Upper Tropospheric Sounding

NASA Technical Reports Server (NTRS)

McHugh, Martin J.; Gordley, Larry L.; Russell, James M., III; Hervig, Mark E.

1999-01-01

This report details the ongoing efforts by GATS, Inc., in conjunction with Hampton University and University of Wyoming, in NASA's Mission to Planet Earth UARS Science Investigator Program entitled "HALOE Algorithm Improvements for Upper Tropospheric Soundings." The goal of this effort is to develop and implement major inversion and processing improvements that will extend HALOE measurements further into the troposphere. In particular, O3, H2O, and CH4 retrievals may be extended into the middle troposphere, and NO, HCl and possibly HF into the upper troposphere. Key areas of research being carried out to accomplish this include: pointing/tracking analysis; cloud identification and modeling; simultaneous multichannel retrieval capability; forward model improvements; high vertical-resolution gas filter channel retrievals; a refined temperature retrieval; robust error analyses; long-term trend reliability studies; and data validation. The current (first-year) effort concentrates on the pointer/tracker correction algorithms, cloud filtering and validation, and multi-channel retrieval development. However, these areas are all highly coupled, so progress in one area benefits from and sometimes depends on work in others.

HALOE Algorithm Improvements for Upper Tropospheric Sounding

NASA Technical Reports Server (NTRS)

Thompson, Robert Earl; McHugh, Martin J.; Gordley, Larry L.; Hervig, Mark E.; Russell, James M., III; Douglass, Anne (Technical Monitor)

2001-01-01

This report details the ongoing efforts by GATS, Inc., in conjunction with Hampton University and University of Wyoming, in NASA's Mission to Planet Earth Upper Atmospheric Research Satellite (UARS) Science Investigator Program entitled 'HALOE Algorithm Improvements for Upper Tropospheric Sounding.' The goal of this effort is to develop and implement major inversion and processing improvements that will extend Halogen Occultation Experiment (HALOE) measurements further into the troposphere. In particular, O3, H2O, and CH4 retrievals may be extended into the middle troposphere, and NO, HCl and possibly HF into the upper troposphere. Key areas of research being carried out to accomplish this include: pointing/tracking analysis; cloud identification and modeling; simultaneous multichannel retrieval capability; forward model improvements; high vertical-resolution gas filter channel retrievals; a refined temperature retrieval; robust error analyses; long-term trend reliability studies; and data validation. The current (first year) effort concentrates on the pointer/tracker correction algorithms, cloud filtering and validation, and multichannel retrieval development. However, these areas are all highly coupled, so progress in one area benefits from and sometimes depends on work in others.

Yield Model Development (YMD) implementation plan for fiscal years 1981 and 1982

NASA Technical Reports Server (NTRS)

Ambroziak, R. A. (Principal Investigator)

1981-01-01

A plan is described for supporting USDA crop production forecasting and estimation by (1) testing, evaluating, and selecting crop yield models for application testing; (2) identifying areas of feasible research for improvement of models; and (3) conducting research to modify existing models and to develop new crop yield assessment methods. Tasks to be performed for each of these efforts are described as well as for project management and support. The responsibilities of USDA, USDC, USDI, and NASA are delineated as well as problem areas to be addressed.

SLS Navigation Model-Based Design Approach

NASA Technical Reports Server (NTRS)

Oliver, T. Emerson; Anzalone, Evan; Geohagan, Kevin; Bernard, Bill; Park, Thomas

2018-01-01

The SLS Program chose to implement a Model-based Design and Model-based Requirements approach for managing component design information and system requirements. This approach differs from previous large-scale design efforts at Marshall Space Flight Center where design documentation alone conveyed information required for vehicle design and analysis and where extensive requirements sets were used to scope and constrain the design. The SLS Navigation Team has been responsible for the Program-controlled Design Math Models (DMMs) which describe and represent the performance of the Inertial Navigation System (INS) and the Rate Gyro Assemblies (RGAs) used by Guidance, Navigation, and Controls (GN&C). The SLS Navigation Team is also responsible for the navigation algorithms. The navigation algorithms are delivered for implementation on the flight hardware as a DMM. For the SLS Block 1-B design, the additional GPS Receiver hardware is managed as a DMM at the vehicle design level. This paper provides a discussion of the processes and methods used to engineer, design, and coordinate engineering trades and performance assessments using SLS practices as applied to the GN&C system, with a particular focus on the Navigation components. These include composing system requirements, requirements verification, model development, model verification and validation, and modeling and analysis approaches. The Model-based Design and Requirements approach does not reduce the effort associated with the design process versus previous processes used at Marshall Space Flight Center. Instead, the approach takes advantage of overlap between the requirements development and management process, and the design and analysis process by efficiently combining the control (i.e. the requirement) and the design mechanisms. The design mechanism is the representation of the component behavior and performance in design and analysis tools. The focus in the early design process shifts from the development and management of design requirements to the development of usable models, model requirements, and model verification and validation efforts. The models themselves are represented in C/C++ code and accompanying data files. Under the idealized process, potential ambiguity in specification is reduced because the model must be implementable versus a requirement which is not necessarily subject to this constraint. Further, the models are shown to emulate the hardware during validation. For models developed by the Navigation Team, a common interface/standalone environment was developed. The common environment allows for easy implementation in design and analysis tools. Mechanisms such as unit test cases ensure implementation as the developer intended. The model verification and validation process provides a very high level of component design insight. The origin and implementation of the SLS variant of Model-based Design is described from the perspective of the SLS Navigation Team. The format of the models and the requirements are described. The Model-based Design approach has many benefits but is not without potential complications. Key lessons learned associated with the implementation of the Model Based Design approach and process from infancy to verification and certification are discussed

Incorporating phosphorus cycling into global modeling efforts: a worthwhile, tractable endeavor.

PubMed

Reed, Sasha C; Yang, Xiaojuan; Thornton, Peter E

2015-10-01

324 I. 324 II. 325 III. 326 IV. 327 328 References 328 SUMMARY: Myriad field, laboratory, and modeling studies show that nutrient availability plays a fundamental role in regulating CO2 exchange between the Earth's biosphere and atmosphere, and in determining how carbon pools and fluxes respond to climatic change. Accordingly, global models that incorporate coupled climate-carbon cycle feedbacks made a significant advance with the introduction of a prognostic nitrogen cycle. Here we propose that incorporating phosphorus cycling represents an important next step in coupled climate-carbon cycling model development, particularly for lowland tropical forests where phosphorus availability is often presumed to limit primary production. We highlight challenges to including phosphorus in modeling efforts and provide suggestions for how to move forward. No claim to original US government works New Phytologist © 2015 New Phytologist Trust.

Analytical prediction of digital signal crosstalk of FCC

NASA Technical Reports Server (NTRS)

Belleisle, A. P.

1972-01-01

The results are presented of study effort whose aim was the development of accurate means of analyzing and predicting signal cross-talk in multi-wire digital data cables. A complete analytical model is developed n + 1 wire systems of uniform transmission lines with arbitrary linear boundary conditions. In addition, a minimum set of parameter measurements required for the application of the model are presented. Comparisons between cross-talk predicted by this model and actual measured cross-talk are shown for a six conductor ribbon cable.

Integrated Modeling of the Human-Natural System to Improve Local Water Management and Planning

NASA Astrophysics Data System (ADS)

Gutowski, W. J., Jr.; Dziubanski, D.; Franz, K.; Goodwin, J.; Rehmann, C. R.; Simpkins, W. W.; Tesfastion, L.; Wanamaker, A. D.; Jie, Y.

2015-12-01

Communities across the world are experiencing the effects of unsustainable water management practices. Whether the problem is a lack of water, too much water, or water of degraded quality, finding acceptable solutions requires community-level efforts that integrate sound science with local needs and values. Our project develops both a software technology (agent-based hydrological modeling) and a social technology (a participatory approach to model development) that will allow communities to comprehensively address local water challenges. Using agent-based modeling (ABM), we are building a modeling system that includes a semi-distributed hydrologic process model coupled with agent (stakeholder) models. Information from the hydrologic model is conveyed to the agent models, which, along with economic information, determine appropriate agent actions that subsequently affect hydrology within the model. The iterative participatory modeling (IPM) process will assist with the continual development of the agent models. Further, IPM creates a learning environment in which all participants, including researchers, are co-exploring relevant data, possible scenarios and solutions, and viewpoints through continuous interactions. Our initial work focuses on the impact of flood mitigation and conservation efforts on reducing flooding in an urban area. We are applying all research elements above to the Squaw Creek watershed that flows through parts of four counties in central Iowa. The watershed offers many of the typical tensions encountered in Iowa, such as different perspectives on water management between upstream farmers and downstream urban areas, competition for various types of recreational services, and increasing absentee land ownership that may conflict with community values. Ultimately, climate change scenarios will be incorporated into the model to determine long term patterns that may develop within the social or natural system.

Population status and habitat associations of the King Rail in the midwestern United States

USGS Publications Warehouse

Bolenbaugh, Jason R.; Cooper, Tom; Brady, Ryan S.; Willard, Karen L.; Krementz, David G.

2012-01-01

The migratory population of the King Rail (Rallus elegans) has declined dramatically during the past 50 years, emphasizing the need to document the distribution and status of this species to help guide conservation efforts. In an effort to guide King Rail breeding habitat protection and restoration, a landscape suitability index (LSI) model was developed for the Upper Mississippi River and Great Lakes Region Joint Venture (JV). To validate this model, 264 sites were surveyed across the JV region in 2008 and 2009 using the National Marshbird Monitoring protocol. Two other similarly collected data sets from Wisconsin (250 sites) and Ohio (259 sites) as well as data from the Cornell Laboratory of Ornithology's eBird database were added to our data set. Sampling effort was not uniform across the study area. King Rails were detected at 29 sites with the greatest concentration in southeastern Wisconsin and northeastern Illinois. Too few detections were made to validate the LSI model. King Rail detection sites tended to have microtopographic heterogeneity, more emergent herbaceous wetland vegetation and less woody vegetation. The migrant population of the King Rail is rare and warrants additional conservation efforts to achieve stated conservation population targets.

Issues in the Pharmacokinetics of Trichloroethylene and Its Metabolites

PubMed Central

Chiu, Weihsueh A.; Okino, Miles S.; Lipscomb, John C.; Evans, Marina V.

2006-01-01

Much progress has been made in understanding the complex pharmacokinetics of trichloroethylene (TCE). Qualitatively, it is clear that TCE is metabolized to multiple metabolites either locally or into systemic circulation. Many of these metabolites are thought to have toxicologic importance. In addition, efforts to develop physiologically based pharmacokinetic (PBPK) models have led to a better quantitative assessment of the dosimetry of TCE and several of its metabolites. As part of a mini-monograph on key issues in the health risk assessment of TCE, this article is a review of a number of the current scientific issues in TCE pharmacokinetics and recent PBPK modeling efforts with a focus on literature published since 2000. Particular attention is paid to factors affecting PBPK modeling for application to risk assessment. Recent TCE PBPK modeling efforts, coupled with methodologic advances in characterizing uncertainty and variability, suggest that rigorous application of PBPK modeling to TCE risk assessment appears feasible at least for TCE and its major oxidative metabolites trichloroacetic acid and trichloroethanol. However, a number of basic structural hypotheses such as enterohepatic recirculation, plasma binding, and flow- or diffusion-limited treatment of tissue distribution require additional evaluation and analysis. Moreover, there are a number of metabolites of potential toxicologic interest, such as chloral, dichloroacetic acid, and those derived from glutathione conjugation, for which reliable pharmacokinetic data is sparse because of analytical difficulties or low concentrations in systemic circulation. It will be a challenge to develop reliable dosimetry for such cases. PMID:16966104

Experimental design applications for modeling and assessing carbon dioxide sequestration in saline aquifers

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rogers, John

2014-11-29

This project was a computer modeling effort to couple reservoir simulation and ED/RSM using Sensitivity Analysis, Uncertainty Analysis, and Optimization Methods, to assess geologic, geochemical, geomechanical, and rock-fluid effects and factors on CO 2 injectivity, capacity, and plume migration. The project objective was to develop proxy models to simplify the highly complex coupled geochemical and geomechanical models in the utilization and storage of CO 2 in the subsurface. The goals were to investigate and prove the feasibility of the ED/RSM processes and engineering development, and bridge the gaps regarding the uncertainty and unknowns of the many geochemical and geomechanical interactingmore » parameters in the development and operation of anthropogenic CO 2 sequestration and storage sites. The bottleneck in this workflow is the high computational effort of reactive transport simulation models and large number of input variables to optimize with ED/RSM techniques. The project was not to develop the reactive transport, geomechanical, or ED/RSM software, but was to use what was commercially and/or publically available as a proof of concept to generate proxy or surrogate models. A detailed geologic and petrographic mineral assemblage and geologic structure of the doubly plunging anticline was defined using the USDOE RMOTC formations of interest data (e.g., Lower Sundance, Crow Mountain, Alcova Limestone, and Red Peak). The assemblage of 23 minerals was primarily developed from literature data and petrophysical (well log) analysis. The assemblage and structure was input into a commercial reactive transport simulator to predict the effects of CO 2 injection and complex reactions with the reservoir rock. Significant impediments were encountered during the execution phase of the project. The only known commercial reactive transport simulator was incapable of simulating complex geochemistry modeled in this project. Significant effort and project funding was expended to determine the limitations of both the commercial simulator and the Lawrence Berkeley National Laboratory (LBNL) R&D simulator, TOUGHREACT available to the project. A simplified layer cake model approximating the volume of the RMOTC targeted reservoirs was defined with 1-3 minerals eventually modeled with limited success. Modeling reactive transport in porous media requires significant computational power. In this project, up to 24 processors were used to model a limited mineral set of 1-3 minerals. In addition, geomechanical aspects of injecting CO 2 into closed, semi-open, and open systems in various well completion methods was simulated. Enhanced Oil Recovery (EOR) as a storage method was not modeled. A robust and stable simulation dataset or base case was developed and used to create a master dataset with embedded instructions for input to the ED/RSM software. Little success was achieved toward the objective of the project using the commercial simulator or the LBNL simulator versions available during the time of this project. Several hundred realizations were run with the commercial simulator and ED/RSM software, most having convergence problems and terminating prematurely. A proxy model for full field CO 2 injection sequestration utilization and storage was not capable of being developed with software available for this project. Though the chemistry is reasonably known and understood, based on the amount of effort and huge computational time required, predicting CO 2 sequestration storage capacity in geologic formations to within the program goals of ±30% proved unsuccessful.« less

Prevention of Spacecraft Anomalies: The Role of Space Climate and Space Weather Models

NASA Technical Reports Server (NTRS)

Barth, Janet L.

2003-01-01

Space-based systems are developing into critical infrastructure to support the quality of life on Earth. Mission requirements along with rapidly evolving technologies have outpaced efforts to accommodate detrimental space environment impacts on systems. This chapter describes approaches to accommodate space climate and space weather impacts on systems and notes areas where gaps in model development limit our ability to prevent spacecraft anomalies.

Cost Modeling for Space Telescope

NASA Technical Reports Server (NTRS)

Stahl, H. Philip

2011-01-01

Parametric cost models are an important tool for planning missions, compare concepts and justify technology investments. This paper presents on-going efforts to develop single variable and multi-variable cost models for space telescope optical telescope assembly (OTA). These models are based on data collected from historical space telescope missions. Standard statistical methods are used to derive CERs for OTA cost versus aperture diameter and mass. The results are compared with previously published models.

QUANTIFYING AN UNCERTAIN FUTURE: HYDROLOGIC MODEL PERFORMANCE FOR A SERIES OF REALIZED "FUTURE" CONDITIONS

EPA Science Inventory

GIS-based hydrologic modeling offers a convenient means of assessing the impacts associated with land-cover/use change for environmental planning efforts. Future scenarios can be developed through a combination of modifications to the land-cover/use maps used to parameterize hydr...

Integrated Land-Use, Transportation and Environmental Modeling The Vermont Integrated Land-Use and Transportation Carbon Estimator

DOT National Transportation Integrated Search

2012-05-01

The Vermont Integrated Land-Use and Transportation Carbon Estimator (VILTCE) project is part of a larger effort to develop environmental metrics related to travel, and to integrate these tools into a travel model under UVM TRC Signature Project No. 1...

The Strategic Assessment Model.

ERIC Educational Resources Information Center

Glazner, Steve, Ed.

This book presents six papers focusing on the application of the strategic assessment model (SAM) to the management of higher education facilities. The papers are part of an ongoing effort by the Association of Higher Education Facilities Officers to provide comparative cost and staffing information and to develop a benchmarking process. The…

Tying Resource Allocation and TQM into Planning and Assessment Efforts.

ERIC Educational Resources Information Center

Mullendore, Richard H.; Wang, Li-Shing

1996-01-01

Describes the evolution of a model, developed by student affairs officials, which outlines a planning process for implementing Total Quality Management. Presents step-by-step instructions for the model's deployment and discusses such issues as transitions, planning forms, goals, and professional and personal growth needs. (RJM)

NWTC Helps Guide U.S. Offshore R&D; NREL (National Renewable Energy Laboratory)

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

2015-07-01

The National Wind Technology Center (NWTC) at the National Renewable Energy Laboratory (NREL) is helping guide our nation's research-and-development effort in offshore renewable energy, which includes: Design, modeling, and analysis tools; Device and component testing; Resource characterization; Economic modeling and analysis; Grid integration.

Modified HWBI Model(s) Linking Service Flows to Well-Being Endpoints: Accounting for Environmental Quality

EPA Science Inventory

This report describes an approach for modifying ORD’s Human Well-Being Index (HWBI) to increase its utility by introducing a composite index developed independently of the HWBI effort. Using ORD’s Environmental Quality Index (EQI), this research examines the potential...

Exposure Modeling Tools and Databases for Consideration for Relevance to the Amended TSCA (ISES)

EPA Science Inventory

The Agency’s Office of Research and Development (ORD) has a number of ongoing exposure modeling tools and databases. These efforts are anticipated to be useful in supporting ongoing implementation of the amended Toxic Substances Control Act (TSCA). Under ORD’s Chemic...

An Integrated Approach to Swept Wing Icing Simulation

NASA Technical Reports Server (NTRS)

Potapczuk, Mark G.; Broeren, Andy P.

2017-01-01

This presentation describes the various elements of a simulation approach used to develop a database of ice shape geometries and the resulting aerodynamic performance data for a representative commercial transport wing model exposed to a variety of icing conditions. Methods for capturing full three-dimensional ice shape geometries, geometry interpolation along the span of the wing, and creation of artificial ice shapes based upon that geometric data were developed for this effort. The icing conditions used for this effort were representative of actual ice shape encounter scenarios and run the gamut from ice roughness to full three-dimensional scalloped ice shapes.

Approaches in highly parameterized inversion - PEST++, a Parameter ESTimation code optimized for large environmental models

USGS Publications Warehouse

Welter, David E.; Doherty, John E.; Hunt, Randall J.; Muffels, Christopher T.; Tonkin, Matthew J.; Schreuder, Willem A.

2012-01-01

An object-oriented parameter estimation code was developed to incorporate benefits of object-oriented programming techniques for solving large parameter estimation modeling problems. The code is written in C++ and is a formulation and expansion of the algorithms included in PEST, a widely used parameter estimation code written in Fortran. The new code is called PEST++ and is designed to lower the barriers of entry for users and developers while providing efficient algorithms that can accommodate large, highly parameterized problems. This effort has focused on (1) implementing the most popular features of PEST in a fashion that is easy for novice or experienced modelers to use and (2) creating a software design that is easy to extend; that is, this effort provides a documented object-oriented framework designed from the ground up to be modular and extensible. In addition, all PEST++ source code and its associated libraries, as well as the general run manager source code, have been integrated in the Microsoft Visual Studio® 2010 integrated development environment. The PEST++ code is designed to provide a foundation for an open-source development environment capable of producing robust and efficient parameter estimation tools for the environmental modeling community into the future.

Shielding requirements for the Space Station habitability modules

NASA Technical Reports Server (NTRS)

Avans, Sherman L.; Horn, Jennifer R.; Williamsen, Joel E.

1990-01-01

The design, analysis, development, and tests of the total meteoroid/debris protection system for the Space Station Freedom habitability modules, such as the habitation module, the laboratory module, and the node structures, are described. Design requirements are discussed along with development efforts, including a combination of hypervelocity testing and analyses. Computer hydrocode analysis of hypervelocity impact phenomena associated with Space Station habitability structures is covered and the use of optimization techniques, engineering models, and parametric analyses is assessed. Explosive rail gun development efforts and protective capability and damage tolerance of multilayer insulation due to meteoroid/debris impact are considered. It is concluded that anticipated changes in the debris environment definition and requirements will require rescoping the tests and analysis required to develop a protection system.

Millimeter wave satellite communication studies. Results of the 1981 propagation modeling effort

NASA Technical Reports Server (NTRS)

Stutzman, W. L.; Tsolakis, A.; Dishman, W. K.

1982-01-01

Theoretical modeling associated with rain effects on millimeter wave propagation is detailed. Three areas of work are discussed. A simple model for prediction of rain attenuation is developed and evaluated. A method for computing scattering from single rain drops is presented. A complete multiple scattering model is described which permits accurate calculation of the effects on dual polarized signals passing through rain.

Human Cancer Models Initiative | Office of Cancer Genomics

Cancer.gov

The Human Cancer Models Initiative (HCMI) is an international consortium that is generating novel human tumor-derived culture models, which are annotated with genomic and clinical data. In an effort to advance cancer research and more fully understand how in vitro findings are related to clinical biology, HCMI-developed models and related data will be available as a community resource for cancer and other research.

Human Cancer Models Initiative | Office of Cancer Genomics

Cancer.gov

The Human Cancer Models Initiative (HCMI) is an international consortium that is generating novel human tumor-derived culture models, which are annotated with genomic and clinical data. In an effort to advance cancer research and more fully understand how in vitro findings are related to clinical biology, HCMI-developed models and related data will be available as a community resource for cancer research.

The Influence of Curriculum, Instruction, Technology, and Social Interactions on Two Fifth-Grade Students' Epistemologies in Modeling throughout a Model-Based Curriculum Unit

ERIC Educational Resources Information Center

Baek, Hamin; Schwarz, Christina V.

2015-01-01

In the past decade, reform efforts in science education have increasingly attended to engaging students in scientific practices such as scientific modeling. Engaging students in scientific modeling can help them develop their epistemologies by allowing them to attend to the roles of mechanism and empirical evidence when constructing and revising…

Advanced Modeling and Uncertainty Quantification for Flight Dynamics; Interim Results and Challenges

NASA Technical Reports Server (NTRS)

Hyde, David C.; Shweyk, Kamal M.; Brown, Frank; Shah, Gautam

2014-01-01

As part of the NASA Vehicle Systems Safety Technologies (VSST), Assuring Safe and Effective Aircraft Control Under Hazardous Conditions (Technical Challenge #3), an effort is underway within Boeing Research and Technology (BR&T) to address Advanced Modeling and Uncertainty Quantification for Flight Dynamics (VSST1-7). The scope of the effort is to develop and evaluate advanced multidisciplinary flight dynamics modeling techniques, including integrated uncertainties, to facilitate higher fidelity response characterization of current and future aircraft configurations approaching and during loss-of-control conditions. This approach is to incorporate multiple flight dynamics modeling methods for aerodynamics, structures, and propulsion, including experimental, computational, and analytical. Also to be included are techniques for data integration and uncertainty characterization and quantification. This research shall introduce new and updated multidisciplinary modeling and simulation technologies designed to improve the ability to characterize airplane response in off-nominal flight conditions. The research shall also introduce new techniques for uncertainty modeling that will provide a unified database model comprised of multiple sources, as well as an uncertainty bounds database for each data source such that a full vehicle uncertainty analysis is possible even when approaching or beyond Loss of Control boundaries. Methodologies developed as part of this research shall be instrumental in predicting and mitigating loss of control precursors and events directly linked to causal and contributing factors, such as stall, failures, damage, or icing. The tasks will include utilizing the BR&T Water Tunnel to collect static and dynamic data to be compared to the GTM extended WT database, characterizing flight dynamics in off-nominal conditions, developing tools for structural load estimation under dynamic conditions, devising methods for integrating various modeling elements into a real-time simulation capability, generating techniques for uncertainty modeling that draw data from multiple modeling sources, and providing a unified database model that includes nominal plus increments for each flight condition. This paper presents status of testing in the BR&T water tunnel and analysis of the resulting data and efforts to characterize these data using alternative modeling methods. Program challenges and issues are also presented.

Multiscale Materials Modeling in an Industrial Environment.

PubMed

Weiß, Horst; Deglmann, Peter; In 't Veld, Pieter J; Cetinkaya, Murat; Schreiner, Eduard

2016-06-07

In this review, we sketch the materials modeling process in industry. We show that predictive and fast modeling is a prerequisite for successful participation in research and development processes in the chemical industry. Stable and highly automated workflows suitable for handling complex systems are a must. In particular, we review approaches to build and parameterize soft matter systems. By satisfying these prerequisites, efficiency for the development of new materials can be significantly improved, as exemplified here for formulation polymer development. This is in fact in line with recent Materials Genome Initiative efforts sponsored by the US government. Valuable contributions to product development are possible today by combining existing modeling techniques in an intelligent fashion, provided modeling and experiment work hand in hand.

Software Transition Project Retrospectives and the Application of SEL Effort Estimation Model and Boehm's COCOMO to Complex Software Transition Projects

NASA Technical Reports Server (NTRS)

McNeill, Justin

1995-01-01

The Multimission Image Processing Subsystem (MIPS) at the Jet Propulsion Laboratory (JPL) has managed transitions of application software sets from one operating system and hardware platform to multiple operating systems and hardware platforms. As a part of these transitions, cost estimates were generated from the personal experience of in-house developers and managers to calculate the total effort required for such projects. Productivity measures have been collected for two such transitions, one very large and the other relatively small in terms of source lines of code. These estimates used a cost estimation model similar to the Software Engineering Laboratory (SEL) Effort Estimation Model. Experience in transitioning software within JPL MIPS have uncovered a high incidence of interface complexity. Interfaces, both internal and external to individual software applications, have contributed to software transition project complexity, and thus to scheduling difficulties and larger than anticipated design work on software to be ported.

Computational Systems for Multidisciplinary Applications

NASA Technical Reports Server (NTRS)

Soni, Bharat; Haupt, Tomasz; Koomullil, Roy; Luke, Edward; Thompson, David

2002-01-01

In this paper, we briefly describe our efforts to develop complex simulation systems. We focus first on four key infrastructure items: enterprise computational services, simulation synthesis, geometry modeling and mesh generation, and a fluid flow solver for arbitrary meshes. We conclude by presenting three diverse applications developed using these technologies.