Improving influenza virological surveillance in Europe: strain-based reporting of antigenic and genetic characterisation data, 11 European countries, influenza season 2013/14

PubMed Central

Broberg, Eeva; Hungnes, Olav; Schweiger, Brunhilde; Prosenc, Katarina; Daniels, Rod; Guiomar, Raquel; Ikonen, Niina; Kossyvakis, Athanasios; Pozo, Francisco; Puzelli, Simona; Thomas, Isabelle; Waters, Allison; Wiman, Åsa; Meijer, Adam

2016-01-01

Influenza antigenic and genetic characterisation data are crucial for influenza vaccine composition decision making. Previously, aggregate data were reported to the European Centre for Disease Prevention and Control by European Union/European Economic Area (EU/EEA) countries. A system for collecting case-specific influenza antigenic and genetic characterisation data was established for the 2013/14 influenza season. In a pilot study, 11 EU/EEA countries reported through the new mechanism. We demonstrated feasibility of reporting strain-based antigenic and genetic data and ca 10% of influenza virus-positive specimens were selected for further characterisation. Proportions of characterised virus (sub)types were similar to influenza virus circulation levels. The main genetic clades were represented by A/StPetersburg/27/2011(H1N1)pdm09 and A/Texas/50/2012(H3N2). A(H1N1)pdm09 viruses were more prevalent in age groups (by years) < 1 (65%; p = 0.0111), 20–39 (50%; p = 0.0046) and 40–64 (55%; p = 0.00001) while A(H3N2) viruses were most prevalent in those ≥ 65 years (62%*; p = 0.0012). Hospitalised patients in the age groups 6–19 years (67%; p = 0.0494) and ≥ 65 years (52%; p = 0.0005) were more frequently infected by A/Texas/50/2012 A(H3N2)-like viruses compared with hospitalised cases in other age groups. Strain-based reporting enabled deeper understanding of influenza virus circulation among hospitalised patients and substantially improved the reporting of virus characterisation data. Therefore, strain-based reporting of readily available data is recommended to all reporting countries within the EU/EEA. PMID:27762211

The Heroic and the Villainous: a qualitative study characterising the role models that shaped senior doctors' professional identity.

PubMed

Foster, Kirsty; Roberts, Chris

2016-08-16

The successful development and sustaining of professional identity is critical to being a successful doctor. This study explores the enduring impact of significant early role models on the professional identity formation of senior doctors. Personal Interview Narratives were derived from the stories told by twelve senior doctors as they recalled accounts of people and events from the past that shaped their notions of being a doctor. Narrative inquiry methodology was used to explore and analyse video recording and transcript data from interviews. Role models were frequently characterised as heroic, or villainous depending on whether they were perceived as good or bad influences respectively. The degree of sophistication in participants' characterisations appeared to correspond with the stage of life of the participant at the time of the encounter. Heroes were characterised as attractive, altruistic, caring and clever, often in exaggerated terms. Conversely, villains were typically characterised as direct or covert bullies. Everyday events were surprisingly powerful, emotionally charged and persisted in participants' memories much longer than expected. In particular, unresolved emotions dating from encounters where bullying behaviour had been witnessed or experienced were still apparent decades after the event. The characterisation of role models is an important part of the professional identity and socialisation of senior doctors. The enduring impact of what role models say and do means that all doctors, need to consistently reflect on how their own behaviour impacts the development of appropriate professional behaviours in both students and training doctors. This is especially important where problematic behaviours occur as, if not dealt with, they have the potential for long-lasting undesirable effects. The importance of small acts of caring in building a nurturing and supportive learning atmosphere at all stages of medical education cannot be underestimated.

Mathematical modelling and quantitative methods.

PubMed

Edler, L; Poirier, K; Dourson, M; Kleiner, J; Mileson, B; Nordmann, H; Renwick, A; Slob, W; Walton, K; Würtzen, G

2002-01-01

The present review reports on the mathematical methods and statistical techniques presently available for hazard characterisation. The state of the art of mathematical modelling and quantitative methods used currently for regulatory decision-making in Europe and additional potential methods for risk assessment of chemicals in food and diet are described. Existing practices of JECFA, FDA, EPA, etc., are examined for their similarities and differences. A framework is established for the development of new and improved quantitative methodologies. Areas for refinement, improvement and increase of efficiency of each method are identified in a gap analysis. Based on this critical evaluation, needs for future research are defined. It is concluded from our work that mathematical modelling of the dose-response relationship would improve the risk assessment process. An adequate characterisation of the dose-response relationship by mathematical modelling clearly requires the use of a sufficient number of dose groups to achieve a range of different response levels. This need not necessarily lead to an increase in the total number of animals in the study if an appropriate design is used. Chemical-specific data relating to the mode or mechanism of action and/or the toxicokinetics of the chemical should be used for dose-response characterisation whenever possible. It is concluded that a single method of hazard characterisation would not be suitable for all kinds of risk assessments, and that a range of different approaches is necessary so that the method used is the most appropriate for the data available and for the risk characterisation issue. Future refinements to dose-response characterisation should incorporate more clearly the extent of uncertainty and variability in the resulting output.

Testing and classification of individual plants for fire behaviour: plant selection for the wildland–urban interface

Treesearch

Robert H. White; Wayne C. Zipperer

2010-01-01

Knowledge of how species differ in their flammability characteristics is needed to develop more reliable lists of plants recommended for landscaping homes in the wildland–urban interface (WUI). As indicated by conflicting advice in such lists, such characterisation is not without difficulties and disagreements. The flammability of vegetation is often described as...

Minimal standards for describing new species belonging to the families Campylobacteraceae and Helicobacteraceae: Campylobacter, Arcobacter, Helicobacter and Wolinella spp.

PubMed Central

On, Stephen L. W.; Miller, William G.; Houf, Kurt; Fox, James G.; Vandamme, Peter

2017-01-01

Ongoing changes in taxonomic methods, and in the rapid development of the taxonomic structure of species assigned to the Epsilonproteobacteria have lead the International Committee of Systematic Bacteriology Subcommittee on the Taxonomy of Campylobacter and Related Bacteria to discuss significant updates to previous minimal standards for describing new species of Campylobacteraceae and Helicobacteraceae. This paper is the result of these discussions and proposes minimum requirements for the description of new species belonging to the families Campylobacteraceae and Helicobacteraceae, thus including species in Campylobacter, Arcobacter, Helicobacter, and Wolinella. The core underlying principle remains the use of appropriate phenotypic and genotypic methods to characterise strains sufficiently so as to effectively and unambiguously determine their taxonomic position in these families, and provide adequate means by which the new taxon can be distinguished from extant species and subspecies. This polyphasic taxonomic approach demands the use of appropriate reference data for comparison to ensure the novelty of proposed new taxa, and the recommended study of at least five strains to enable species diversity to be assessed. Methodological approaches for phenotypic and genotypic (including whole-genome sequence comparisons) characterisation are recommended. PMID:29034857

A Characteristic Dose Model for Historical Internal Dose Reconstruction in the Framework of the IAEC Compensation Programme.

PubMed

Kravchik, T; Abraham, A; Israeli, M; Yahel, E

2017-04-25

A model was developed at the Nuclear Research Centre Negev (NRCN) to assess historical doses from internal exposures by a relatively fast and simple procedure. These assessments are needed in the framework of a compensation programme for the Israeli Atomic Energy Commission (IAEC) workers, which were diagnosed for cancer diseases. This compensation programme was recently recommended by a public committee to avoid lengthy court procedures. The developed model is based on the recorded doses from external exposures of all the workers at the NRCN, who were divided into groups representing their different working environments. Each group of workers was characterised by three parameters: working period, working areas and occupation. The model uses several conservative assumptions in order to calculate the doses to various body organs in certain years, which are relevant to the calculation of the probability of causation (POC). The POC value serves as a main parameter in the compensation programme. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Systems modelling approaches to the design of safe healthcare delivery: ease of use and usefulness perceived by healthcare workers.

PubMed

Jun, Gyuchan Thomas; Ward, James; Clarkson, P John

2010-07-01

The UK health service, which had been diagnosed to be seriously out of step with good design practice, has been recommended to obtain knowledge of design and risk management practice from other safety-critical industries. While these other industries have benefited from a broad range of systems modelling approaches, healthcare remains a long way behind. In order to investigate the healthcare-specific applicability of systems modelling approaches, this study identified 10 distinct methods through meta-model analysis. Healthcare workers' perception on 'ease of use' and 'usefulness' was then evaluated. The characterisation of the systems modelling methods showed that each method had particular capabilities to describe specific aspects of a complex system. However, the healthcare workers found that some of the methods, although potentially very useful, would be difficult to understand, particularly without prior experience. This study provides valuable insights into a better use of the systems modelling methods in healthcare. STATEMENT OF RELEVANCE: The findings in this study provide insights into how to make a better use of various systems modelling approaches to the design and risk management of healthcare delivery systems, which have been a growing research interest among ergonomists and human factor professionals.

Retrospective population pharmacokinetic/pharmacodynamic analysis of pyridostigmine, a cholinesterase inhibitor, in Chinese males.

PubMed

Seng, Kok-Yong; Loke, Weng-Keong; Moochhala, Shabbir; Zhao, Bin; Lee, Jon-Deoon Edmund

2009-09-01

We have characterised the population pharmacokinetics-pharmacodynamics of pyridostigmine given as pyridostigmine bromide. Over three days 50 healthy Chinese male subjects each received seven doses of 30 mg pyridostigmine bromide orally (3 x 10 mg every 8 h). Plasma concentrations of pyridostigmine and red blood cell acetylcholinesterase (AChE) activity were determined at various times within the eight hours after the first and the seventh doses. The resulting pharmacokinetic data were fitted to a single compartment open model with first-order absorption and elimination. The pharmacodynamics were modelled using an inhibitory E(max) model. The potential influence of demographic and biological covariates on the model parameters was investigated. Nonlinear mixed effects modelling was performed using NONMEM. The apparent clearance and volume of distribution as well as absorption rate constant of plasma pyridostigmine were estimated to be 136 l/h, 130 l and 0.68 1/h, respectively. The maximum red blood cell AChE activity decrease (E(max)) and plasma pyridostigmine concentration producing 50% of this reduction (EC50) were estimated to be 9.32 AChE units per gram haemoglobin and 51.9 ng/ml, respectively. None of the tested covariates were found to be correlated with any of the model parameters. Dosing simulations suggested that 30 mg repeated every six hours might be needed to achieve steady-state trough percentage inhibition above the recommended 10% in healthy Chinese males. The pharmacokinetics and the effects of pyridostigmine on red blood cell AChE activity were described using a mixed effects model. For Chinese males, the dosing interval may have been shorter than that recommended for the Caucasian population. Additional studies are needed to confirm these findings.

Improving applied roughness measurement of involute helical gears

NASA Astrophysics Data System (ADS)

Koulin, G.; Zhang, J.; Frazer, R. C.; Wilson, S. J.; Shaw, B. A.

2017-12-01

With improving gear design and manufacturing technology, improvement in metrology is necessary to provide reliable feedback to the designer and manufacturer. A recommended gear roughness measurement method is applied to a micropitting contact fatigue test gear. The development of wear and micropitting is reliably characterised at the sub-micron roughness level. Changes to the features of the localised surface texture are revealed and are related to key gear meshing positions. The application of the recommended methodology is shown to provide informative feedback to the gear designer in reference to the fundamental gear coordinate system, which is used in gear performance simulations such as tooth contact analysis.

Characterising the ambient sound environment for infants in intensive care wards.

PubMed

Shoemark, Helen; Harcourt, Edward; Arnup, Sarah J; Hunt, Rod W

2016-04-01

The purpose of this study is to characterise ambient sound levels of paediatric and neonatal intensive care units in an old and new hospital according to current standards. The sound environment was surveyed for 24-h data collection periods (n = 80) in the Neonatal and Paediatric Intensive Care Units (NICUs and PICUs) and Special Care Nursery of the old and new Royal Children's Hospital Melbourne. The ambient sound environment was characterised as the proportion of time the ongoing ambient sound met standard benchmarks, the mean 5-s sound levels and the number and duration of noise events. In the old hospital, none of the data collection periods in the NICU and PICU met the standard benchmark for ongoing ambient sound, while only 5 of the 22 data collection periods in the new hospital met the recommended level. There was no change in proportion of time at recommended Leq between the old and the new Special Care Nursery. There was strong evidence for a difference in the mean number of events >65 dBA (Lmax ) in the old and new hospital (rate ratio = 0.82, 95% confidence interval: 0.73 to 0.92, P = 0.001). The NICU and PICU were above 50 dBA in 75% of all data collection periods, with ventilatory equipment associated with higher ongoing ambient sound levels. The ongoing ambient sound suggests that the background sound environment of the new hospital is not different to the old hospital. However, there may be a reduction in the number of noise events. © 2016 The Authors Journal of Paediatrics and Child Health © 2016 Paediatrics and Child Health Division (Royal Australasian College of Physicians).

Focus on risperidone.

PubMed

Green, B

2000-01-01

Risperidone is a relatively new antipsychotic available world-wide since the early 1990s. It has been characterised as atypical, but shares some of the extrapyramidal side-effect profile of the earlier antipsychotics, when used at doses higher than those recommended by the manufacturer (4-6 mg/day). There is now adequate comparison with conventional antipsychotics to suggest its superiority, but a depot formulation is needed to complete the picture.

WEEE and portable batteries in residual household waste: quantification and characterisation of misplaced waste.

PubMed

Bigum, Marianne; Petersen, Claus; Christensen, Thomas H; Scheutz, Charlotte

2013-11-01

A total of 26.1Mg of residual waste from 3129 households in 12 Danish municipalities was analysed and revealed that 89.6kg of Waste Electrical and Electronic Equipment (WEEE), 11kg of batteries, 2.2kg of toners and 16kg of cables had been wrongfully discarded. This corresponds to a Danish household discarding 29g of WEEE (7 items per year), 4g of batteries (9 batteries per year), 1g of toners and 7g of unidentifiable cables on average per week, constituting 0.34% (w/w), 0.04% (w/w), 0.01% (w/w) and 0.09% (w/w), respectively, of residual waste. The study also found that misplaced WEEE and batteries in the residual waste constituted 16% and 39%, respectively, of what is being collected properly through the dedicated special waste collection schemes. This shows that a large amount of batteries are being discarded with the residual waste, whereas WEEE seems to be collected relatively successfully through the dedicated special waste collection schemes. Characterisation of the misplaced batteries showed that 20% (w/w) of the discarded batteries were discarded as part of WEEE (built-in). Primarily alkaline batteries, carbon zinc batteries and alkaline button cell batteries were found to be discarded with the residual household waste. Characterisation of WEEE showed that primarily small WEEE (WEEE directive categories 2, 5a, 6, 7 and 9) and light sources (WEEE directive category 5b) were misplaced. Electric tooth brushes, watches, clocks, headphones, flashlights, bicycle lights, and cables were items most frequently found. It is recommended that these findings are taken into account when designing new or improving existing special waste collection schemes. Improving the collection of WEEE is also recommended as one way to also improve the collection of batteries due to the large fraction of batteries found as built-in. The findings in this study were comparable to other western European studies, suggesting that the recommendations made in this study could apply to other western European countries as well. Copyright © 2013 Elsevier Ltd. All rights reserved.

Airway disease phenotypes in animal models of cystic fibrosis.

PubMed

McCarron, Alexandra; Donnelley, Martin; Parsons, David

2018-04-02

In humans, cystic fibrosis (CF) lung disease is characterised by chronic infection, inflammation, airway remodelling, and mucus obstruction. A lack of pulmonary manifestations in CF mouse models has hindered investigations of airway disease pathogenesis, as well as the development and testing of potential therapeutics. However, recently generated CF animal models including rat, ferret and pig models demonstrate a range of well characterised lung disease phenotypes with varying degrees of severity. This review discusses the airway phenotypes of currently available CF animal models and presents potential applications of each model in airway-related CF research.

Phenotypic and functional characterisation of ovine mesenchymal stem cells: application to a cartilage defect model.

PubMed

Mrugala, D; Bony, C; Neves, N; Caillot, L; Fabre, S; Moukoko, D; Jorgensen, C; Noël, D

2008-03-01

Multipotent mesenchymal stromal cells (MSC) are of particular interest for their potential clinical use in cartilage engineering, but a consistent model is missing in large animals. In the absence of any detailed study reporting a complete characterisation of the mesenchymal cells isolated from sheep bone marrow, we fully characterised adherent stromal cells and developed a pre-clinical model of cartilage engineering by implantation of autologous MSC in the Merinos sheep. Ovine MSC (oMSC) were isolated from bone marrow, expanded and further characterised according to the recently proposed definition of the MSC. The experimental model consists of partial-thickness lesions created in the inner part of the patellae of the posterior legs. Lesions were filled with oMSC with or without chitosan, with or without transforming growth factor (TGF)beta-3, in a fibrin clot. oMSC were shown to display the three main characteristics of MSC: adherence to plastic, phenotypic profile (positive for CD44, CD105, vimentin and negative for CD34 and CD45), and trilineage differentiation potential. We also report two other important functional characteristics of MSC: support of long-term haematopoiesis and immunosuppressive capacity. In vivo, 2 months after implantation the histological analysis revealed chondrocyte-like cells surrounded by a hyaline-like cartilaginous matrix that was integrated to the host cartilage when oMSC were combined with chitosan and TGFbeta-3. This study provides for the first time a strong characterisation of oMSC and establishes the basis for a model of cartilage engineering in a large animal.

Characterisation and modelling of defect formation in direct-chill cast AZ80 alloy

DOE Office of Scientific and Technical Information (OSTI.GOV)

Mackie, D.; Robson, J.D.; Withers, P.J.

2015-06-15

Wrought magnesium alloys for demanding structural applications require high quality defect free cast feedstock. The aim of this study was to first identify and characterise typical defects in direct chill cast magnesium–aluminium–zinc (AZ) alloy billet and then use modelling to understand the origins of these defects so they can be prevented. Defects were first located using ultrasonic inspection and were then characterised using X-ray computed tomography (XCT) and serial sectioning, establishing the presence of oxide films and intermetallic particles Al{sub 8}Mn{sub 5} in all defects. A model was developed to predict the flow patterns and growth kinetics of the intermetallicmore » phases during casting, which influence the formation of defects. Simulation of the growth of the intermetallic particles demonstrated that precipitation from the liquid occurs in the mould. The combination of the entrained oxide films and intermetallic particles recirculates in the liquid metal and continues to grow, until large enough to settle, which is predicted to occur at the centre of the mould where the flow is the slowest. Based on these predictions, strategies to reduce the susceptibility to defect formation are suggested. - Highlights: • Casting defects in magnesium direct chill casting have been imaged and characterised in 3-dimensions. • The occurrences of co-located clusters of particles and oxide films have been characterised and explained. • A coupled model has been developed to help interpret the observed trend for defects located towards the centre of billets.« less

Whole-genome sequencing and antigenic analysis of the first equine influenza virus identified in Turkey.

PubMed

Gahan, Jacinta; Garvey, Marie; Gildea, Sarah; Gür, Emre; Kagankaya, Anil; Cullinane, Ann

2018-05-01

In 2013, there was an outbreak of acute respiratory disease in racehorses in Turkey. The clinical signs were consistent with equine influenza (EI). The aim was to confirm the cause of the outbreak and characterise the causal virus. A pan-reactive influenza type A real-time RT-PCR and a rapid antigen detection kit were used for confirmatory diagnosis of equine influenza virus (EIV). Immunological susceptibility to EIV was examined using single radial haemolysis and ELISA. Antigenic characterisation was completed by haemagglutinin inhibition using a panel of specific ferret antisera. Genetic characterisation was achieved by whole-genome sequencing using segment-specific primers with M13 tags. A H3N8 EIV of the Florida clade 2 sublineage (FC2) was confirmed as the causal agent. The index cases were unvaccinated and immunologically susceptible. Phylogenetic analysis of the HA1 and NA genes demonstrated that A/equine/Ankara/1/2013 clustered with the FC2 strains circulating in Europe. Antigenic characterisation confirmed the FC2 classification and demonstrated the absence of significant drift. Whole-genome sequencing indicated that A/equine/Ankara/1/2013 is most closely related to the viruses described as the 179 group based on the substitution I179V in HA1, for example A/equine/East Renfrewshire/2/2011, A/equine/Cambremer/1/2012 and A/equine/Saone et Loire/1/2015. The greatest diversity was observed in the NS1 segment and the polymerase complex. The first recorded outbreak of EI in Turkey was caused by an FC2 virus closely related to viruses circulating in Europe. Antigenic and genetic characterisation gave no indication that the current OIE recommendations for EI vaccine composition require modification. © 2017 The Authors. Influenza and Other Respiratory Viruses Published by John Wiley & Sons Ltd.

Potency values from the local lymph node assay: application to classification, labelling and risk assessment.

PubMed

Loveless, S E; Api, A-M; Crevel, R W R; Debruyne, E; Gamer, A; Jowsey, I R; Kern, P; Kimber, I; Lea, L; Lloyd, P; Mehmood, Z; Steiling, W; Veenstra, G; Woolhiser, M; Hennes, C

2010-02-01

Hundreds of chemicals are contact allergens but there remains a need to identify and characterise accurately skin sensitising hazards. The purpose of this review was fourfold. First, when using the local lymph node assay (LLNA), consider whether an exposure concentration (EC3 value) lower than 100% can be defined and used as a threshold criterion for classification and labelling. Second, is there any reason to revise the recommendation of a previous ECETOC Task Force regarding specific EC3 values used for sub-categorisation of substances based upon potency? Third, what recommendations can be made regarding classification and labelling of preparations under GHS? Finally, consider how to integrate LLNA data into risk assessment and provide a rationale for using concentration responses and corresponding no-effect concentrations. Although skin sensitising chemicals having high EC3 values may represent only relatively low risks to humans, it is not possible currently to define an EC3 value below 100% that would serve as an appropriate threshold for classification and labelling. The conclusion drawn from reviewing the use of distinct categories for characterising contact allergens was that the most appropriate, science-based classification of contact allergens according to potency is one in which four sub-categories are identified: 'extreme', 'strong', 'moderate' and 'weak'. Since draining lymph node cell proliferation is related causally and quantitatively to potency, LLNA EC3 values are recommended for determination of a no expected sensitisation induction level that represents the first step in quantitative risk assessment. 2009 Elsevier Inc. All rights reserved.

Posterior headache as a warning symptom of vertebral dissection: a case report.

PubMed

Lanfranchi, S; Di Falco, M; Perini, M; Zarcone, D

2005-12-01

Cervicocerebral arterial dissection is an important cause of stroke in young adults; the onset is often characterised by severe occipital headache, followed by nausea, vomiting and vertigo, mimicking a migraine attack. We describe herewith a case of vertebral arterial dissection with cerebellar infarction, which started with a posterior headache and neurovegetative symptoms, without other signs. Recommendations for recognition of similar cases, potentially dangerous and treatable, are discussed.

Pervasive randomness in physics: an introduction to its modelling and spectral characterisation

NASA Astrophysics Data System (ADS)

Howard, Roy

2017-10-01

An introduction to the modelling and spectral characterisation of random phenomena is detailed at a level consistent with a first exposure to the subject at an undergraduate level. A signal framework for defining a random process is provided and this underpins an introduction to common random processes including the Poisson point process, the random walk, the random telegraph signal, shot noise, information signalling random processes, jittered pulse trains, birth-death random processes and Markov chains. An introduction to the spectral characterisation of signals and random processes, via either an energy spectral density or a power spectral density, is detailed. The important case of defining a white noise random process concludes the paper.

Characterisation of the n-colour printing process using the spot colour overprint model.

PubMed

Deshpande, Kiran; Green, Phil; Pointer, Michael R

2014-12-29

This paper is aimed at reproducing the solid spot colours using the n-colour separation. A simplified numerical method, called as the spot colour overprint (SCOP) model, was used for characterising the n-colour printing process. This model was originally developed for estimating the spot colour overprints. It was extended to be used as a generic forward characterisation model for the n-colour printing process. The inverse printer model based on the look-up table was implemented to obtain the colour separation for n-colour printing process. Finally the real-world spot colours were reproduced using 7-colour separation on lithographic offset printing process. The colours printed with 7 inks were compared against the original spot colours to evaluate the accuracy. The results show good accuracy with the mean CIEDE2000 value between the target colours and the printed colours of 2.06. The proposed method can be used successfully to reproduce the spot colours, which can potentially save significant time and cost in the printing and packaging industry.

Testing new methodologies and assessing their potential for reservoir characterisation: Geoelectrical studies in the Northwest Carboniferous Basin (Ireland).

NASA Astrophysics Data System (ADS)

Ogaya, Xènia; Campanyà, Joan; Rath, Volker; Jones, Alan G.; Reay, Derek; Raine, Rob; McConnell, Brian; Ledo, Juanjo

2016-04-01

The overarching objective of this study is to improve our methods of characterising saline aquifers by integrating newly acquired electromagnetic data with existing geophysical and geological data. The work presented here is part of an ongoing project to evaluate Ireland's potential for onshore carbon sequestration (IRECCSEM; funded by Science Foundation Ireland). The methodology presented in this characterisation work is not only relevant for studying the potential for onshore carbon sequestration, but is generally applicable for aquifer characterisation, particularly for the evaluation of geothermal resources in appropriate geological settings. We present first results of the three-dimensional (3D) modelling and inversion of the magnetotelluric (MT) data acquired in the Northwest Carboniferous Basin (Ireland) in summer 2015. The electrical resistivity distribution beneath the survey area is constrained using a joint inversion of three different types of electromagnetic data: MT impedance tensor responses (Z), geomagnetic transfer functions (GTF) and inter-station horizontal magnetic transfer-functions (HMT). The preliminary 3D resistivity model obtained reveals the geoelectrical structure of the subsurface, which is translated into parameters relevant to fluid flow. The electromagnetic data were acquired along profiles linking four wells drilled in the area and the available well log data from those wells are used to evaluate some of the existing petrophysical relationships and calibrate them for the study area. This allows us to interpolate the rock physical properties from one well to another well, using the computed geoelectrical model as a reference. The obtained results are compared to available independent geological and geophysical data in order to analyse the validity of this technique, to characterise the uncertainties inherent to our approach, and to assess the potential of this methodology for reservoir characterisation.

Characterising an aluminium oxide dosimetry system.

PubMed

Conheady, Clement F; Gagliardi, Frank M; Ackerly, Trevor

2015-09-01

In vivo dosimetry is recommended as a defence-in-depth strategy in radiotherapy treatments and is currently employed by clinics around the world. The characteristics of a new optically stimulated luminescence dosimetry system were investigated for the purpose of replacing an aging thermoluminescence dosimetry system for in vivo dosimetry. The stability of the system was not sufficient to satisfy commissioning requirements and therefore it has not been released into clinical service at this time.

Characterisation of mega-voltage electron pencil beam dose distributions: viability of a measurement-based approach.

PubMed

Barnes, M P; Ebert, M A

2008-03-01

The concept of electron pencil-beam dose distributions is central to pencil-beam algorithms used in electron beam radiotherapy treatment planning. The Hogstrom algorithm, which is a common algorithm for electron treatment planning, models large electron field dose distributions by the superposition of a series of pencil beam dose distributions. This means that the accurate characterisation of an electron pencil beam is essential for the accuracy of the dose algorithm. The aim of this study was to evaluate a measurement based approach for obtaining electron pencil-beam dose distributions. The primary incentive for the study was the accurate calculation of dose distributions for narrow fields as traditional electron algorithms are generally inaccurate for such geometries. Kodak X-Omat radiographic film was used in a solid water phantom to measure the dose distribution of circular 12 MeV beams from a Varian 21EX linear accelerator. Measurements were made for beams of diameter, 1.5, 2, 4, 8, 16 and 32 mm. A blocked-field technique was used to subtract photon contamination in the beam. The "error function" derived from Fermi-Eyges Multiple Coulomb Scattering (MCS) theory for corresponding square fields was used to fit resulting dose distributions so that extrapolation down to a pencil beam distribution could be made. The Monte Carlo codes, BEAM and EGSnrc were used to simulate the experimental arrangement. The 8 mm beam dose distribution was also measured with TLD-100 microcubes. Agreement between film, TLD and Monte Carlo simulation results were found to be consistent with the spatial resolution used. The study has shown that it is possible to extrapolate narrow electron beam dose distributions down to a pencil beam dose distribution using the error function. However, due to experimental uncertainties and measurement difficulties, Monte Carlo is recommended as the method of choice for characterising electron pencil-beam dose distributions.

Characterisation factors for life cycle impact assessment of sound emissions.

PubMed

Cucurachi, S; Heijungs, R

2014-01-15

Noise is a serious stressor affecting the health of millions of citizens. It has been suggested that disturbance by noise is responsible for a substantial part of the damage to human health. However, no recommended approach to address noise impacts was proposed by the handbook for life cycle assessment (LCA) of the European Commission, nor are characterisation factors (CFs) and appropriate inventory data available in commonly used databases. This contribution provides CFs to allow for the quantification of noise impacts on human health in the LCA framework. Noise propagation standards and international reports on acoustics and noise impacts were used to define the model parameters. Spatial data was used to calculate spatially-defined CFs in the form of 10-by-10-km maps. The results of this analysis were combined with data from the literature to select input data for representative archetypal situations of emission (e.g. urban day with a frequency of 63 Hz, rural night at 8000 Hz, etc.). A total of 32 spatial and 216 archetypal CFs were produced to evaluate noise impacts at a European level (i.e. EU27). The possibility of a user-defined characterisation factor was added to support the possibility of portraying the situation of full availability of information, as well as a highly-localised impact analysis. A Monte Carlo-based quantitative global sensitivity analysis method was applied to evaluate the importance of the input factors in determining the variance of the output. The factors produced are ready to be implemented in the available LCA databases and software. The spatial approach and archetypal approach may be combined and selected according to the amount of information available and the life cycle under study. The framework proposed and used for calculations is flexible enough to be expanded to account for impacts on target subjects other than humans and to continents other than Europe. © 2013 Elsevier B.V. All rights reserved.

Characterising the Perceived Value of Mathematics Educational Apps in Preservice Teachers

ERIC Educational Resources Information Center

Handal, Boris; Campbell, Chris; Cavanagh, Michael; Petocz, Peter

2016-01-01

This study validated the semantic items of three related scales aimed at characterising the perceived worth of mathematics-education-related mobile applications (apps). The technological pedagogical content knowledge (TPACK) model was used as the conceptual framework for the analysis. Three hundred and seventy-three preservice students studying…

Bayesian models for cost-effectiveness analysis in the presence of structural zero costs

PubMed Central

Baio, Gianluca

2014-01-01

Bayesian modelling for cost-effectiveness data has received much attention in both the health economics and the statistical literature, in recent years. Cost-effectiveness data are characterised by a relatively complex structure of relationships linking a suitable measure of clinical benefit (e.g. quality-adjusted life years) and the associated costs. Simplifying assumptions, such as (bivariate) normality of the underlying distributions, are usually not granted, particularly for the cost variable, which is characterised by markedly skewed distributions. In addition, individual-level data sets are often characterised by the presence of structural zeros in the cost variable. Hurdle models can be used to account for the presence of excess zeros in a distribution and have been applied in the context of cost data. We extend their application to cost-effectiveness data, defining a full Bayesian specification, which consists of a model for the individual probability of null costs, a marginal model for the costs and a conditional model for the measure of effectiveness (given the observed costs). We presented the model using a working example to describe its main features. © 2013 The Authors. Statistics in Medicine published by John Wiley & Sons, Ltd. PMID:24343868

Bayesian models for cost-effectiveness analysis in the presence of structural zero costs.

PubMed

Baio, Gianluca

2014-05-20

Bayesian modelling for cost-effectiveness data has received much attention in both the health economics and the statistical literature, in recent years. Cost-effectiveness data are characterised by a relatively complex structure of relationships linking a suitable measure of clinical benefit (e.g. quality-adjusted life years) and the associated costs. Simplifying assumptions, such as (bivariate) normality of the underlying distributions, are usually not granted, particularly for the cost variable, which is characterised by markedly skewed distributions. In addition, individual-level data sets are often characterised by the presence of structural zeros in the cost variable. Hurdle models can be used to account for the presence of excess zeros in a distribution and have been applied in the context of cost data. We extend their application to cost-effectiveness data, defining a full Bayesian specification, which consists of a model for the individual probability of null costs, a marginal model for the costs and a conditional model for the measure of effectiveness (given the observed costs). We presented the model using a working example to describe its main features. © 2013 The Authors. Statistics in Medicine published by John Wiley & Sons, Ltd.

Characterising exoplanet atmospheres with SPHERE: the HR 8799 system with Exo-REM and NEMESIS

NASA Astrophysics Data System (ADS)

Baudino, J.-L.; Bonnefoy, M.; Vigan, A.; Irwin, P. J.

2017-12-01

The characterisation of the exoplanets evolved recently thanks to the beginning of the second generation of direct imaging instruments, especially with SPHERE. The resolution and wavelength range available currently give access to an increase of accuracy and on the number of physical parameters that can be constrain. One of the first target of SPHERE was the HR 8799 system. The four planets was characterised using four different forward models including Exo-REM. We complete this paper buy using NEMESIS, a retrieval code.

Model-based characterisation of growth performance and l-lactic acid production with high optical purity by thermophilic Bacillus coagulans in a lignin-supplemented mixed substrate medium.

PubMed

Glaser, Robert; Venus, Joachim

2017-07-25

Three Bacillus coagulans strains were characterised in terms of their ability to grow in lignin-containing fermentation media and to consume the lignocellulose-related sugars glucose, xylose, and arabinose. An optical-density high-throughput screening was used for precharacterisation by means of different mathematical models for comparison (Logistic, Gompertz, Baranyi, Richards & Stannard, and Schnute). The growth response was characterised by the maximum growth rate and lag time. For a comparison of the screening and fermentation results, an unstructured mathematical model was proposed to characterise the lactate production, bacterial growth and substrate consumption. The growth model was then applied to fermentation procedures using wheat straw hydrolysates. The results indicated that the unstructured growth model can be used to evaluate lactate producing fermentation. Under the experimental fermentation conditions, one strain showed the ability to tolerate a high lignin concentration (2.5g/L) but lacked the capacity for sufficient pentose uptake. The lactate yield of the strains that were able to consume all sugar fractions of glucose, xylose and arabinose was ∼83.4%. A photometric measurement at 280nm revealed a dynamic change in alkali-lignin concentrations during lactate producing fermentation. A test of decolourisation of vanillin, ferulic acid, and alkali-lignin samples also showed the decolourisation performance of the B. coagulans strains under study. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Influence of food intrinsic complexity on Listeria monocytogenes growth in/on vacuum-packed model systems at suboptimal temperatures.

PubMed

Baka, Maria; Noriega, Estefanía; Van Langendonck, Kristof; Van Impe, Jan F

2016-10-17

Food intrinsic factors e.g., food (micro)structure, compositional and physicochemical aspects, which are mutually dependent, influence microbial growth. While the effect of composition and physicochemical properties on microbial growth has been thoroughly assessed and characterised, the role of food (micro)structure still remains unravelled. Most studies on food (micro)structure focus on comparing planktonic growth in liquid (microbiological) media with colonial growth in/on solid-like systems or on real food surfaces. However, foods are not only liquids or solids; they can also be emulsions or gelled emulsions and have complex compositions. In this study, Listeria monocytogenes growth was studied on the whole spectrum of (micro)structure, in terms of food (model) systems. The model systems varied not only in (micro)structure, which was the target of the study, but also in compositional and physicochemical characteristics, which was an inevitable consequence of the (micro)structural variability. The compositional and physicochemical differences were mainly due to the presence or absence of fat and gelling agents. The targeted (micro)structures were: i) liquids, ii) aqueous gels, iii) emulsions and iv) gelled emulsions. Furthermore, the microbial dynamics were studied and compared in/on all these model systems, as well as on a compositionally predefined canned meat, developed in order to have equal compositional level to the gelled emulsion model system and represent a real food system. Frankfurter sausages were the targeted real foods, selected as a case study, to which the canned meat had similar compositional characteristics. All systems were vacuum packed and incubated at 4, 8 and 12°C. The most appropriate protocol for the preparation of the model systems was developed. The pH, water activity and resistance to penetration of the model systems were characterised. Results indicated that low temperature contributes to growth variations among the model systems. Additionally, the firmer the solid system, the faster L. monocytogenes grew on it. Finally, it was found that L. monocytogenes grows faster on canned meat and real Frankfurters, as found in a previous study, followed by liquids, aqueous gels, emulsions and gelled emulsions. This observation indicates that all model systems, developed in this study, underestimated L. monocytogenes growth. Despite some limitations, model systems are overall advantageous and therefore, their validation is always recommended prior to further use. Copyright © 2016. Published by Elsevier B.V.

[Personality and donor-recipient relationships of potential donors before living donor liver transplantation--diagnostics with the repertory-grid technique].

PubMed

Walter, Marc; Walter, Otto B; Fliege, Herbert; Klapp, Burghard F; Danzer, Gerhard

2003-06-01

Living-donor liver transplantation (LDLT) is developing into an established therapy for terminal liver diseases in adults. Potential donors are faced with the risk of postoperative complications and are subject to a high level of psychological pressure and ambivalent feelings. Our assumption is that ambivalent feelings before donation are crucially influenced by the personality and the quality of the donor-recipient relationship. In highly motivated donors we expected a positive description of the recipient and a similarity in the characterisation of the donor and recipient. 58 potential living donors were evaluated between March 2000 and June 2001. On the basis of the clinical interview 10 were rated as unsuited for donation. Among those potential donors assessed as unsuited, we found a high level of ambivalent feelings. For 50 potential donors we gained a set of completed psychometric diagnostic questionnaires. A Repertory-grid investigation was conducted with a total of 28 potential donors. Seven of them were not recommended as living donors. The relationship between donors and recipients was analysed concerning constructs that were most important to the characterisation of the donor or recipient. By means of inter-element distances self-concept of donors and donor-recipient relation were analysed. Ambivalent candidates who were not recommended as living donors tended to describe the recipient negatively (selfish, carping, and unable to take criticism) and did not show a similarity in the characterisations of self and ideal-self. Whereas the highly motivated candidates were marked by a closeness of self and ideal-self concepts. Both groups saw the recipient as indifferent. Closeness between self and ideal-self-indicating satisfaction with the decision to donate seems to be one suitable criterion to distinguish between highly motivated potential donors on the one hand and ambivalent candidates on the other hand. Another criterion appears to be a description of the recipient that indicates either a functioning or ill-functioning communication between donor and recipient with respect to the donation.

A blueprint for the synthesis and characterisation of thin graphene oxide with controlled lateral dimensions for biomedicine

NASA Astrophysics Data System (ADS)

Filipe Rodrigues, Artur; Newman, Leon; Lozano, Neus; Mukherjee, Sourav P.; Fadeel, Bengt; Bussy, Cyrill; Kostarelos, Kostas

2018-07-01

Graphene-based materials (GBMs) have ignited a revolution in material science and technology, with electronic, optical and mechanical properties that are of relevant interest for a wide range of applications. To support the development of these enabling technologies, a global research effort has been invested to assess their hazard and biocompatibility. Different production methods have however generated a diverse collection of GBMs with different physicochemical properties, leading to a variety of biological outcomes that are still not fully understood. To better understand the biological interactions of GBMs with biological systems and allow the design of safer materials, a thorough physicochemical characterisation is therefore highly recommended. The aim of the present work was to produce a blueprint for the synthesis and characterisation of non-pyrogenic graphene oxide (GO) flakes with three different controlled lateral dimensions, which could be further used for either hazard assessment or biomedical proof-of-concept studies. A battery of techniques used to characterise the physicochemical properties of the GO samples included atomic force microscopy, transmission electron microscopy, Fourier-transformed infra-red spectroscopy, x-ray photoelectron spectroscopy and Raman spectroscopy. The combination of these different techniques confirmed that only the lateral dimension varied among the GO materials produced, without significant change in any other of their fundamental physicochemical properties, such as the thickness or surface chemistry. The proposed systematic approach in GO batch production for biology will hopefully contribute to a better understanding of the material properties that govern their interactions with biological systems and offer a blueprint towards standardisation of biologically relevant 2D materials.

Multivariate thermo-hygrometric characterisation of the archaeological site of Plaza de l'Almoina (Valencia, Spain) for preventive conservation.

PubMed

Fernández-Navajas, Angel; Merello, Paloma; Beltrán, Pedro; García-Diego, Fernando-Juan

2013-07-29

Preventive conservation requires monitoring and control of the parameters involved in the deterioration process, mainly temperature and relative humidity. It is important to characterise an archaeological site prior to carrying out comparative studies in the future for preventive conservation, either by regular studies to verify whether the conditions are constant, or occasional ones when the boundary conditions are altered. There are numerous covered archaeological sites, but few preventive conservation works that give special attention to the type of cover installed. In particular, there is no background of microclimatic studies in sites that are in the ground and, as in the Plaza de l'Almoina (Valencia, Spain), are buried and partially covered by a transparent roof. A large effect of the transparent cover was found by the sensors located below this area, with substantial increases in temperature and a decrease in the relative humidity during the day. Surrounding zones also have values above the recommended temperature values. On the other hand, the influence of a buried water drainage line near the site is notable, causing an increase in relative humidity levels in the surrounding areas. Multivariate statistical analyses enabled us to characterise the microclimate of the archaeological site, allowing future testing to determine whether the conservation conditions have been altered.

Multivariate Thermo-Hygrometric Characterisation of the Archaeological Site of Plaza de l’Almoina (Valencia, Spain) for Preventive Conservation

PubMed Central

Fernández-Navajas, Ángel; Merello, Paloma; Beltrán, Pedro; García-Diego, Fernando-Juan

2013-01-01

Preventive conservation requires monitoring and control of the parameters involved in the deterioration process, mainly temperature and relative humidity. It is important to characterise an archaeological site prior to carrying out comparative studies in the future for preventive conservation, either by regular studies to verify whether the conditions are constant, or occasional ones when the boundary conditions are altered. There are numerous covered archaeological sites, but few preventive conservation works that give special attention to the type of cover installed. In particular, there is no background of microclimatic studies in sites that are in the ground and, as in the Plaza de l’Almoina (Valencia, Spain), are buried and partially covered by a transparent roof. A large effect of the transparent cover was found by the sensors located below this area, with substantial increases in temperature and a decrease in the relative humidity during the day. Surrounding zones also have values above the recommended temperature values. On the other hand, the influence of a buried water drainage line near the site is notable, causing an increase in relative humidity levels in the surrounding areas. Multivariate statistical analyses enabled us to characterise the microclimate of the archaeological site, allowing future testing to determine whether the conservation conditions have been altered. PMID:23899937

Feline sporotrichosis: associations between clinical-epidemiological profiles and phenotypic-genotypic characteristics of the etiological agents in the Rio de Janeiro epizootic area

PubMed Central

Boechat, Jéssica Sepulveda; Oliveira, Manoel Marques Evangelista; Almeida-Paes, Rodrigo; Gremião, Isabella Dib Ferreira; Machado, Ana Caroline de Sá; Oliveira, Raquel de Vasconcelos Carvalhaes; Figueiredo, Anna Barreto Fernandes; Rabello, Vanessa Brito de Souza; Silva, Karoline Benevides de Lima; Zancopé-Oliveira, Rosely Maria; Schubach, Tânia Maria Pacheco; Pereira, Sandro Antonio

2018-01-01

BACKGROUND Sporotrichosis is caused by species of the genus Sporothrix. From 1998 to 2015, 4,703 cats were diagnosed at the Fundação Oswaldo Cruz (Fiocruz), Rio de Janeiro, Brazil. Even after the description of the Sporothrix species, the characterisation of feline isolates is not performed routinely. OBJECTIVES To characterise the clinical isolates from cats at the species level and correlate them with the clinical and epidemiological characteristics of the cats. METHODS Forty seven Sporothrix spp. isolates from cats assisted at Fiocruz from 2010 to 2011 were included. Medical records were consulted to obtain the clinical and epidemiological data. The isolates were identified through their morphological and physiological characteristics. T3B polymerase chain reaction (PCR) fingerprinting was used for molecular identification of the species. FINDINGS In phenotypic tests, 34 isolates were characterised as S. brasiliensis, one as S. schenckii and 12 as Sporothrix spp. PCR identified all isolates as S. brasiliensis. MAIN CONCLUSIONS S. brasiliensis is the only etiological agent of feline sporotrichosis in Rio de Janeiro to date. None association was found between the isolates and the clinical and epidemiological data. In addition, we strongly recommend the use of molecular techniques for the identification of isolates of Sporothrix spp. PMID:29412358

Feline sporotrichosis: associations between clinical-epidemiological profiles and phenotypic-genotypic characteristics of the etiological agents in the Rio de Janeiro epizootic area.

PubMed

Boechat, Jéssica Sepulveda; Oliveira, Manoel Marques Evangelista; Almeida-Paes, Rodrigo; Gremião, Isabella Dib Ferreira; Machado, Ana Caroline de Sá; Oliveira, Raquel de Vasconcelos Carvalhaes; Figueiredo, Anna Barreto Fernandes; Rabello, Vanessa Brito de Souza; Silva, Karoline Benevides de Lima; Zancopé-Oliveira, Rosely Maria; Schubach, Tânia Maria Pacheco; Pereira, Sandro Antonio

2018-03-01

Sporotrichosis is caused by species of the genus Sporothrix. From 1998 to 2015, 4,703 cats were diagnosed at the Fundação Oswaldo Cruz (Fiocruz), Rio de Janeiro, Brazil. Even after the description of the Sporothrix species, the characterisation of feline isolates is not performed routinely. To characterise the clinical isolates from cats at the species level and correlate them with the clinical and epidemiological characteristics of the cats. Forty seven Sporothrix spp. isolates from cats assisted at Fiocruz from 2010 to 2011 were included. Medical records were consulted to obtain the clinical and epidemiological data. The isolates were identified through their morphological and physiological characteristics. T3B polymerase chain reaction (PCR) fingerprinting was used for molecular identification of the species. In phenotypic tests, 34 isolates were characterised as S. brasiliensis, one as S. schenckii and 12 as Sporothrix spp. PCR identified all isolates as S. brasiliensis. S. brasiliensis is the only etiological agent of feline sporotrichosis in Rio de Janeiro to date. None association was found between the isolates and the clinical and epidemiological data. In addition, we strongly recommend the use of molecular techniques for the identification of isolates of Sporothrix spp.

Assessing the Impact of Agricultural Pressures on N and P Loads and Potential Eutrophication Risk at Regional Scales

NASA Astrophysics Data System (ADS)

Dupas, R.; Gascuel-odoux, C.; Delmas, M.; Moatar, F.

2014-12-01

Excessive nutrient loading of freshwater bodies results in increased eutrophication risk worldwide. The processes controlling N/P transfer in agricultural landscapes are well documented through scientific studies conducted in intensively monitored catchments. However, managers need tools to assess water quality and evaluate the contribution of agriculture to eutrophication at regional scales, including unmonitored or poorly monitored areas. To this end, we present an assessment framework which includes: i) a mass-balance model to estimate diffuse N/P transfer and retention and ii) indicators based on N:P:Si molar ratios to assess potential eutrophication risk from external loads. The model, called Nutting (Dupas et al., 2013), integrates variables for both detailed description of agricultural pressures (N surplus, soil P content) and characterisation of physical attributes of catchments (including spatial attributes). It was calibrated on 160 catchments, and applied to 2210 unmonitored headwater bodies in France (Dupas et al., under review). N and P retention represented 53% and 95% of soil N and P surplus, respectively, and was mainly controlled by runoff and an index characterising infiltration/runoff properties. According to our estimates, diffuse agricultural sources represented a mean of 97% of N loads and N exceeded Si in 93% of the catchments, whilst they represented 46% of P loads and P exceeded Si in 26-65% of the catchments. Estimated eutrophication risk was highly sensitive to assumptions about P bioavailability, hence the range of headwaters potentially at risk spanned 26-63% of the catchments, depending on assumptions. To reduce this uncertainty, we recommend introducing P bioavailability tests in water monitoring programs, especially in sensitive areas. Dupas R et al. Assessing N emissions in surface water at the national level: comparison of country-wide vs. regionalized models. Sci Total Environ 2013; 443: 152-62. Dupas R et al. Assessing the impact of agricultural pressures on N and P loads and eutrophication risk (under review).

Conceptual uncertainty in crystalline bedrock: Is simple evaluation the only practical approach?

USGS Publications Warehouse

Geier, J.; Voss, C.I.; Dverstorp, B.

2002-01-01

A simple evaluation can be used to characterise the capacity of crystalline bedrock to act as a barrier to releases of radionuclides from a nuclear waste repository. Physically plausible bounds on groundwater flow and an effective transport-resistance parameter are estimated based on fundamental principles and idealised models of pore geometry. Application to an intensively characterised site in Sweden shows that, due to high spatial variability and uncertainty regarding properties of transport paths, the uncertainty associated with the geological barrier is too high to allow meaningful discrimination between good and poor performance. Application of more complex (stochastic-continuum and discrete-fracture-network) models does not yield a significant improvement in the resolution of geologic-barrier performance. Comparison with seven other less intensively characterised crystalline study sites in Sweden leads to similar results, raising a question as to what extent the geological barrier function can be characterised by state-of-the art site investigation methods prior to repository construction. A simple evaluation provides a simple and robust practical approach for inclusion in performance assessment.

[Ethics problems at the end of life. Terminal care--euthanasia].

PubMed

Kampits, P

2002-01-01

The present discussion on active and passive euthanasia is characterised by the polarisation of various approaches deeply rooted in ideologies: quality of life versus sanctity of life. Autonomy, dignity, instrumentalization of human life are discussed. Furthermore the question of differentiation of active, direct and indirect euthanasia is raised. The author pleads for a reduction of dogmatic positions and recommends a moderate way between the general liberalisation and the general verdict of euthanasia on the moral and legal levels.

Growth characterisation of intra-thoracic organs of children on CT scans.

PubMed

Coulongeat, François; Jarrar, Mohamed-Salah; Thollon, Lionel; Serre, Thierry

2013-01-01

This paper analyses the geometry of intra-thoracic organs from computed tomography (CT) scans performed on 20 children aged from 4 months to 16 years. The aim is to find the most reliable measurements to characterise the growth of heart and lungs from CT data. Standard measurements available on chest radiographies are compared with original measurements only available on CT scans. These measurements should characterise the growth of organs as well as the changes in their position relative to the thorax. Measurements were considered as functions of age. Quadratic regression models were fitted to the data. Goodness of fit of the models was then evaluated. Positions of organs relative to the thorax have a high variability compared with their changes with age. The length and volume of the heart and lungs as well as the diameter of the thorax fit well to the models of growth. It could be interesting to study these measurements with a larger sample size in order to define growth standards.

Characterisation of a C1qtnf5 Ser163Arg Knock-In Mouse Model of Late-Onset Retinal Macular Degeneration

PubMed Central

Shu, Xinhua; Luhmann, Ulrich F. O.; Aleman, Tomas S.; Barker, Susan E.; Lennon, Alan; Tulloch, Brian; Chen, Mei; Xu, Heping; Jacobson, Samuel G.; Ali, Robin; Wright, Alan F.

2011-01-01

A single founder mutation resulting in a Ser163Arg substitution in the C1QTNF5 gene product causes autosomal dominant late-onset retinal macular degeneration (L-ORMD) in humans, which has clinical and pathological features resembling age-related macular degeneration. We generated and characterised a mouse “knock-in” model carrying the Ser163Arg mutation in the orthologous murine C1qtnf5 gene by site-directed mutagenesis and homologous recombination into mouse embryonic stem cells. Biochemical, immunological, electron microscopic, fundus autofluorescence, electroretinography and laser photocoagulation analyses were used to characterise the mouse model. Heterozygous and homozygous knock-in mice showed no significant abnormality in any of the above measures at time points up to 2 years. This result contrasts with another C1qtnf5 Ser163Arg knock-in mouse which showed most of the features of L-ORMD but differed in genetic background and targeting construct. PMID:22110650

Understanding the environmental impacts of large fissure eruptions: Aerosol and gas emissions from the 2014-2015 Holuhraun eruption (Iceland)

NASA Astrophysics Data System (ADS)

Ilyinskaya, Evgenia; Schmidt, Anja; Mather, Tamsin A.; Pope, Francis D.; Witham, Claire; Baxter, Peter; Jóhannsson, Thorsteinn; Pfeffer, Melissa; Barsotti, Sara; Singh, Ajit; Sanderson, Paul; Bergsson, Baldur; McCormick Kilbride, Brendan; Donovan, Amy; Peters, Nial; Oppenheimer, Clive; Edmonds, Marie

2017-08-01

The 2014-2015 Holuhraun eruption in Iceland, emitted ∼11 Tg of SO2 into the troposphere over 6 months, and caused one of the most intense and widespread volcanogenic air pollution events in centuries. This study provides a number of source terms for characterisation of plumes in large fissure eruptions, in Iceland and elsewhere. We characterised the chemistry of aerosol particle matter (PM) and gas in the Holuhraun plume, and its evolution as the plume dispersed, both via measurements and modelling. The plume was sampled at the eruptive vent, and in two populated areas in Iceland. The plume caused repeated air pollution events, exceeding hourly air quality standards (350 μg/m3) for SO2 on 88 occasions in Reykjahlíð town (100 km distance), and 34 occasions in Reykjavík capital area (250 km distance). Average daily concentration of volcanogenic PM sulphate exceeded 5 μg/m3 on 30 days in Reykjavík capital area, which is the maximum concentration measured during non-eruptive background interval. There are currently no established air quality standards for sulphate. Combining the results from direct sampling and dispersion modelling, we identified two types of plume impacting the downwind populated areas. The first type was characterised by high concentrations of both SO2 and S-bearing PM, with a high Sgas/SPM mass ratio (SO2(g)/SO42-(PM) > 10). The second type had a low Sgas/SPM ratio (<10). We suggest that this second type was a mature plume where sulphur had undergone significant gas-to-aerosol conversion in the atmosphere. Both types of plume were rich in fine aerosol (predominantly PM1 and PM2.5), sulphate (on average ∼90% of the PM mass) and various trace species, including heavy metals. The fine size of the volcanic PM mass (75-80% in PM2.5), and the high environmental lability of its chemical components have potential adverse implications for environmental and health impacts. However, only the dispersion of volcanic SO2 was forecast in public warnings and operationally monitored during the eruption. We make a recommendation that sulphur gas-to-aerosol conversion processes, and a sufficiently large model domain to contain the transport of a tropospheric plume on the timescale of days be utilized for public health and environmental impact forecasting in future eruptions in Iceland and elsewhere in the world.

Impact penetrometry of analogue planetary regoliths

NASA Astrophysics Data System (ADS)

Paton, M. D.; Green, S. F.; Ball, A. J.

2013-09-01

Erosion and deposition processes on major and minor planetary bodies generate layers of loose broken up material on the surface. Due to the long period over which these processes have been active, the material in these layers can be, depending on the bodies' size, finely ground into grains similar in size to sand or a finer power such as found on the lunar surface. The subsurface stratigraphy of an asteroid, for example, could help characterise and understand the variety of geological features and granular processes on asteroids, e.g. see [1]. The microstructural properties of the asteroid's surface are also important for understanding the impact history of the asteroid, the interpretation of light scattering observations and thermal modelling. As the surface of an asteroid or planet will most likely be granular and loose it is then easy to penetrate, for example by using a cylindrical body tipped with a conical or other shaped tip. Such a device, fitted with a force sensor, that measures the resistance to penetration, can then be used to infer the physical properties of the target, in a similar way to penetrometers used on Earth. These instruments can be made small enough to be deployed by spacecraft to investigate extraterrestrial surfaces as with the Huygens penetrometer that investigated the surface of Titan [2]. A prototype impact penetrometer (fig. 1), based on a standard instrument used for making such measurements on Earth, is introduced. For detailed characterisation of the local stratigraphy penetrometry is usually conducted on the Earth using such a standardised penetrometer inserted slowly and at constant speed into the subsurface. Consequently there is an established and extensive library of publications available for the interpretation of this type of instrument. Impact penetrometry, as the name suggests, is conducted during the impact of a projectile. This type of penetrometry has not been so well characterised and interpreting the results, in terms of stratigraphy, is made difficult due to dynamic effects such as variation in friction and drag coefficient with speed. Here we investigate speed-dependent effects with depth of penetration (see fig. 2) and compare them with the effects of layered material (see fig. 3). We combine a microstructural model [3] with a macroscale model of penetration (see fig. 6) to investigate the importance of momentum effects with impact speed and grain size relative to penetrometer size.We assess the penetrometer for detection of microstructural properties of the regolith such as particle size (see fig. 5) and mass and make recommendations, building on our previous work, for further refinement of an asteroid penetrometer.

The Physiology of Female Sexual Function and the Pathophysiology of Female Sexual Dysfunction (Committee 13A).

PubMed

Levin, Roy J; Both, Stephanie; Georgiadis, Janniko; Kukkonen, Tuuli; Park, Kwangsung; Yang, Claire C

2016-05-01

The article consists of six sections written by separate authors that review female genital anatomy, the physiology of female sexual function, and the pathophysiology of female sexual dysfunction but excluding hormonal aspects. To review the physiology of female sexual function and the pathophysiology of female sexual dysfunction especially since 2010 and to make specific recommendations according to the Oxford Centre for evidence based medicine (2009) "levels of evidence" wherever relevant. Recommendations were made for particular studies to be undertaken especially in controversial aspects in all six sections of the reviewed topics. Despite numerous laboratory assessments of female sexual function, genital assessments alone appear insufficient to characterise fully the complete sexual response. Copyright © 2016 International Society for Sexual Medicine. Published by Elsevier Inc. All rights reserved.

Nanoindentation characterisation of human colorectal cancer cells considering cell geometry, surface roughness and hyperelastic constitutive behaviour

NASA Astrophysics Data System (ADS)

Boccaccio, Antonio; Uva, Antonio E.; Papi, Massimiliano; Fiorentino, Michele; De Spirito, Marco; Monno, Giuseppe

2017-01-01

Characterisation of the mechanical behaviour of cancer cells is an issue of crucial importance as specific cell mechanical properties have been measured and utilized as possible biomarkers of cancer progression. Atomic force microscopy certainly occupies a prominent place in the field of the mechanical characterisation devices. We developed a hybrid approach to characterise different cell lines (SW620 and SW480) of the human colon carcinoma submitted to nanoindentation measurements. An ad hoc algorithm was written that compares the force-indentation curves experimentally retrieved with those predicted by a finite element model that simulates the nanoindentation process and reproduces the cell geometry and the surface roughness. The algorithm perturbs iteratively the values of the cell mechanical properties implemented in the finite element model until the difference between the experimental and numerical force-indentation curves reaches the minimum value. The occurrence of this indicates that the implemented material properties are very close to the real ones. Different hyperelastic constitutive models, such as Arruda-Boyce, Mooney-Rivlin and Neo-Hookean were utilized to describe the structural behaviour of indented cells. The algorithm was capable of separating, for all the cell lines investigated, the mechanical properties of cell cortex and cytoskeleton. Material properties determined via the algorithm were different with respect to those obtained with the Hertzian contact theory. This demonstrates that factors such as: the cell geometry/anatomy and the hyperelastic constitutive behaviour, which are not contemplated in the Hertz’s theory hypotheses, do affect the nanoindentation measurements. The proposed approach represents a powerful tool that, only on the basis of nanoindentation measurements, is capable of characterising material at the subcellular level.

Biodiversity characterisation and hydrodynamic consequences of marine fouling communities on marine renewable energy infrastructure in the Orkney Islands Archipelago, Scotland, UK.

PubMed

Want, Andrew; Crawford, Rebecca; Kakkonen, Jenni; Kiddie, Greg; Miller, Susan; Harris, Robert E; Porter, Joanne S

2017-08-01

As part of ongoing commitments to produce electricity from renewable energy sources in Scotland, Orkney waters have been targeted for potential large-scale deployment of wave and tidal energy converting devices. Orkney has a well-developed infrastructure supporting the marine energy industry; recently enhanced by the construction of additional piers. A major concern to marine industries is biofouling on submerged structures, including energy converters and measurement instrumentation. In this study, the marine energy infrastructure and instrumentation were surveyed to characterise the biofouling. Fouling communities varied between deployment habitats; key species were identified allowing recommendations for scheduling device maintenance and preventing spread of invasive organisms. A method to measure the impact of biofouling on hydrodynamic response is described and applied to data from a wave-monitoring buoy deployed at a test site in Orkney. The results are discussed in relation to the accuracy of the measurement resources for power generation. Further applications are suggested for future testing in other scenarios, including tidal energy.

Microbial enhancement of compost extracts based on cattle rumen content compost - characterisation of a system.

PubMed

Shrestha, Karuna; Shrestha, Pramod; Walsh, Kerry B; Harrower, Keith M; Midmore, David J

2011-09-01

Microbially enhanced compost extracts ('compost tea') are being used in commercial agriculture as a source of nutrients and for their perceived benefit to soil microbiology, including plant disease suppression. Rumen content material is a waste of cattle abattoirs, which can be value-added by conversion to compost and 'compost tea'. A system for compost extraction and microbial enhancement was characterised. Molasses amendment increased bacterial count 10-fold, while amendment based on molasses and 'fish and kelp hydrolysate' increased fungal count 10-fold. Compost extract incubated at 1:10 (w/v) dilution showed the highest microbial load, activity and humic/fulvic acid content compared to other dilutions. Aeration increased the extraction efficiency of soluble metabolites, and microbial growth rate, as did extraction of compost without the use of a constraining bag. A protocol of 1:10 dilution and aerated incubation with kelp and molasses amendments is recommended to optimise microbial load and fungal-to-bacterial ratio for this inoculum source. Copyright © 2011 Elsevier Ltd. All rights reserved.

Large-scale deployment of the Global Trigger Tool across a large hospital system: refinements for the characterisation of adverse events to support patient safety learning opportunities.

PubMed

Good, V S; Saldaña, M; Gilder, R; Nicewander, D; Kennerly, D A

2011-01-01

The Institute for Healthcare Improvement encourages use of the Global Trigger Tool to objectively determine and monitor adverse events (AEs). Baylor Health Care System (BHCS) is an integrated healthcare delivery system in North Texas. The Global Trigger Tool was applied to BHCS's eight general acute care hospitals, two inpatient cardiovascular hospitals and two rehabilitation/long-term acute care hospitals. Data were collected from a monthly random sample of charts for each facility for patients discharged between 1 July 2006 and 30 June 2007 by external professional nurse auditors using an MS Access Tool developed for this initiative. In addition to the data elements recommended by Institute for Healthcare Improvement, BHCS developed fields to permit further characterisation of AEs to identify learning opportunities. A structured narrative description of each identified AE facilitated text mining to further characterise AEs. INITIAL FINDINGS: Based on this sample, AE rates were found to be 68.1 per 1000 patient days, or 50.8 per 100 encounters, and 39.8% of admissions were found to have ≥1 AE. Of all AEs identified, 61.2% were hospital-acquired, 10.1% of which were associated with a National Coordinating Council - Medical Error Reporting and Prevention harm score of "H or I" (near death or death). To enhance learning opportunities and guide quality improvement, BHCS collected data-such as preventability and AE source-to characterise the nature of AEs. Data are provided regularly to hospital teams to direct quality initiatives, moving from a general focus on reducing AEs to more specific programmes based on patterns of harm and preventability.

Using Hidden Markov Models to characterise intermittent social behaviour in fish shoals

NASA Astrophysics Data System (ADS)

Bode, Nikolai W. F.; Seitz, Michael J.

2018-02-01

The movement of animals in groups is widespread in nature. Understanding this phenomenon presents an important problem in ecology with many applications that range from conservation to robotics. Underlying all group movements are interactions between individual animals and it is therefore crucial to understand the mechanisms of this social behaviour. To date, despite promising methodological developments, there are few applications to data of practical statistical techniques that inferentially investigate the extent and nature of social interactions in group movement. We address this gap by demonstrating the usefulness of a Hidden Markov Model approach to characterise individual-level social movement in published trajectory data on three-spined stickleback shoals ( Gasterosteus aculeatus) and novel data on guppy shoals ( Poecilia reticulata). With these models, we formally test for speed-mediated social interactions and verify that they are present. We further characterise this inferred social behaviour and find that despite the substantial shoal-level differences in movement dynamics between species, it is qualitatively similar in guppies and sticklebacks. It is intermittent, occurring in varying numbers of individuals at different time points. The speeds of interacting fish follow a bimodal distribution, indicating that they are either stationary or move at a preferred mean speed, and social fish with more social neighbours move at higher speeds, on average. Our findings and methodology present steps towards characterising social behaviour in animal groups.

Development of an anti-ferret CD4 monoclonal antibody for the characterisation of ferret T lymphocytes.

PubMed

Layton, Daniel S; Xiao, Xiaowen; Bentley, John D; Lu, Louis; Stewart, Cameron R; Bean, Andrew G D; Adams, Timothy E

2017-05-01

The ferret is an established animal model for a number of human respiratory viral infections, such as influenza virus and more recently, Ebola virus. However, a paucity of immunological reagents has hampered the study of cellular immune responses. Here we describe the development and characterisation of a novel monoclonal antibody (mAb) against the ferret CD4 antigen and the characterisation of ferret CD4 T lymphocytes. Recombinant production and purification of the ferret CD4 ectodomain soluble protein allowed hybridoma generation and the generation of a mAb (FeCD4) showing strong binding to ferret CD4 protein and lymphoid cells by flow cytometry. FeCD4 bound to its cognate antigen post-fixation with paraformaldehyde (PFA) which is routinely used to inactivate highly pathogenic viruses. We have also used FeCD4 in conjunction with other immune cell markers to characterise ferret T cells in both primary and secondary lymphoid organs. In summary, we have developed an important reagent for the study of cellular immunological responses in the ferret model of infectious disease. Copyright © 2017 Elsevier B.V. All rights reserved.

Influence of smooth temperature variation on hotspot ignition

NASA Astrophysics Data System (ADS)

Reinbacher, Fynn; Regele, Jonathan David

2018-01-01

Autoignition in thermally stratified reactive mixtures originates in localised hotspots. The ignition behaviour is often characterised using linear temperature gradients and more recently constant temperature plateaus combined with temperature gradients. Acoustic timescale characterisation of plateau regions has been successfully used to characterise the type of mechanical disturbance that will be created from a plateau core ignition. This work combines linear temperature gradients with superelliptic cores in order to more accurately account for a local temperature maximum of finite size and the smooth temperature variation contained inside realistic hotspot centres. A one-step Arrhenius reaction is used to model a H2-air reactive mixture. Using the superelliptic approach a range of behaviours for temperature distributions are investigated by varying the temperature profile between the gradient only and plateau and gradient bounding cases. Each superelliptic case is compared to a respective plateau and gradient case where simple acoustic timescale characterisation may be performed. It is shown that hot spots equivalent with excitation-to-acoustic timescale ratios sufficiently greater than unity exhibit behaviour very similar to a simple plateau-gradient model. However, for larger hot spots with timescale ratios sufficiently less than unity the reaction behaviour is highly dependent on the smooth temperature profile contained within the core region.

Nano-metrology and terrain modelling - convergent practice in surface characterisation

USGS Publications Warehouse

Pike, R.J.

2000-01-01

The quantification of magnetic-tape and disk topography has a macro-scale counterpart in the Earth sciences - terrain modelling, the numerical representation of relief and pattern of the ground surface. The two practices arose independently and continue to function separately. This methodological paper introduces terrain modelling, discusses its similarities to and differences from industrial surface metrology, and raises the possibility of a unified discipline of quantitative surface characterisation. A brief discussion of an Earth-science problem, subdividing a heterogeneous terrain surface from a set of sample measurements, exemplifies a multivariate statistical procedure that may transfer to tribological applications of 3-D metrological height data.

A national EHR strategy preparedness characterisation model and its application in the South-East European region.

PubMed

Orfanidis, Leonidas; Bamidis, Panagiotis; Eaglestone, Barry

2006-01-01

This paper is concerned with modelling national approaches towards electronic health record systems (NEHRS) development. A model framework is stepwise produced, that allows for the characterisation of the preparedness and the readiness of a country to develop an NEHRS. Secondary data of published reports are considered for the creation of the model. Such sources are identified to mostly originate from within a sample of five developed countries. Factors arising from these sources are identified, coded and scaled, so as to allow for a quantitative application of the model. Instantiation of the latter for the case of the five developed countries is contrasted with the set of countries from South East Europe (SEE). The likely importance and validity of this modelling approach is discussed, using the Delphi method.

Field investigation with real-time virus genetic characterisation support of a cluster of Ebola virus disease cases in Dubréka, Guinea, April to June 2015.

PubMed

Pini, Alessandro; Zomahoun, Delayo; Duraffour, Sophie; Derrough, Tarik; Charles, Myrna; Quick, Joshua; Loman, Nick; Cowley, Lauren; Leno, Mamadou; Ouedraogo, Nobila; Thiam, Oumou; Hernández-Romieu, Alfonso; Iko, Annie; Keita, Halimatou; Konate, Djiba; Soumah, Aboubacar Aboubak; Bouchouar, Etran; Ileka-Priouzeau, Samuel; Keita, Sakoba; Diallo, Boubacar; Cisse, Fode; Jansa, Josep; Carroll, Miles; Günther, Stephan; Severi, Ettore; Formenty, Pierre

2018-03-01

On 11 May 2015, the Dubréka prefecture, Guinea, reported nine laboratory-confirmed cases of Ebola virus disease (EVD). None could be epidemiologically linked to cases previously reported in the prefecture. We describe the epidemiological and molecular investigations of this event. We used the Dubréka EVD registers and the Ebola treatment centre's (ETC) records to characterise chains of transmission. Real-time field Ebola virus sequencing was employed to support epidemiological results. An epidemiological cluster of 32 cases was found, of which 27 were laboratory confirmed, 24 were isolated and 20 died. Real-time viral sequencing on 12 cases demonstrated SL3 lineage viruses with sequences differing by one to three nt inside a single phylogenetic cluster. For isolated cases, the average time between symptom onset and ETC referral was 2.8 days (interquartile range (IQR): 1-4). The average time between sample collection and molecular results' availability was 3 days (IQR: 2-5). In an area with scarce resources, the genetic characterisation supported the outbreak investigations in real time, linking cases where epidemiological investigation was limited and reassuring that the responsible strain was already circulating in Guinea. We recommend coupling thorough epidemiological and genomic investigations to control EVD clusters.

An ASM/ADM model interface for dynamic plant-wide simulation.

PubMed

Nopens, Ingmar; Batstone, Damien J; Copp, John B; Jeppsson, Ulf; Volcke, Eveline; Alex, Jens; Vanrolleghem, Peter A

2009-04-01

Mathematical modelling has proven to be very useful in process design, operation and optimisation. A recent trend in WWTP modelling is to include the different subunits in so-called plant-wide models rather than focusing on parts of the entire process. One example of a typical plant-wide model is the coupling of an upstream activated sludge plant (including primary settler, and secondary clarifier) to an anaerobic digester for sludge digestion. One of the key challenges when coupling these processes has been the definition of an interface between the well accepted activated sludge model (ASM1) and anaerobic digestion model (ADM1). Current characterisation and interface models have key limitations, the most critical of which is the over-use of X(c) (or lumped complex) variable as a main input to the ADM1. Over-use of X(c) does not allow for variation of degradability, carbon oxidation state or nitrogen content. In addition, achieving a target influent pH through the proper definition of the ionic system can be difficult. In this paper, we define an interface and characterisation model that maps degradable components directly to carbohydrates, proteins and lipids (and their soluble analogues), as well as organic acids, rather than using X(c). While this interface has been designed for use with the Benchmark Simulation Model No. 2 (BSM2), it is widely applicable to ADM1 input characterisation in general. We have demonstrated the model both hypothetically (BSM2), and practically on a full-scale anaerobic digester treating sewage sludge.

De novo design, synthesis and characterisation of MP3, a new catalytic four-helix bundle hemeprotein.

PubMed

Faiella, Marina; Maglio, Ornella; Nastri, Flavia; Lombardi, Angela; Lista, Liliana; Hagen, Wilfred R; Pavone, Vincenzo

2012-12-07

A new artificial metalloenzyme, MP3 (MiniPeroxidase 3), designed by combining the excellent structural properties of four-helix bundle protein scaffolds with the activity of natural peroxidases, was synthesised and characterised. This new hemeprotein model was developed by covalently linking the deuteroporphyrin to two peptide chains of different compositions to obtain an asymmetric helix-loop-helix/heme/helix-loop-helix sandwich arrangement, characterised by 1) a His residue on one chain that acts as an axial ligand to the iron ion; 2) a vacant distal site that is able to accommodate exogenous ligands or substrates; and 3) an Arg residue in the distal site that should assist in hydrogen peroxide activation to give an HRP-like catalytic process. MP3 was synthesised and characterised as its iron complex. CD measurements revealed the high helix-forming propensity of the peptide, confirming the appropriateness of the model procedure; UV/Vis, MCD and EPR experiments gave insights into the coordination geometry and the spin state of the metal. Kinetic experiments showed that Fe(III)-MP3 possesses peroxidase-like activity comparable to R38A-hHRP, highlighting the possibility of mimicking the functional features of natural enzymes. The synergistic application of de novo design methods, synthetic procedures, and spectroscopic characterisation, described herein, demonstrates a method by which to implement and optimise catalytic activity for an enzyme mimetic. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Effects of rainfall events on the evapotranspiration retrieved by an energy balance model

NASA Astrophysics Data System (ADS)

Maltese, Antonino; Cammalleri, Carmelo; Ciraolo, Giuseppe; La Loggia, Goffredo

2009-09-01

An alternative way to map the actual evapotranspiration (ET) spatial distribution at daily scale is the application of residual surface energy balance models to satellite images that are characterised by high temporal frequency and moderate spatial resolution, like those acquired by the MODIS sensors on board of TERRA and AQUA platforms. Within this research the well-known SEBAL model has been applied on an area located in the southern part of Sicily (Imera Meridionale catchment) using four images acquired between the 27th of March and the 11th of April 2007. The catchment extends for about 2000 km2 and includes both mountains and hill areas: the first are located in the northern part (the Madonie Mountains), while the latter characterise the southern area. The altitude ranges between 0 and 1900 m a.s.l., with an average altitude of 500 m a.s.l.. In order to validate the outputs of the energy balance model, a flux tower has been installed within a homogeneous field of cereal located in the valley part of the basin (close to Licata town within the Quignones Farm), characterised by semi-arid conditions. The selected images have been acquired before and after a three-rainfall events period (5 mm during the night between the 2nd and the 3rd of April, 17 mm on the 3rd evening, 8 mm on the 4th thoroughly all the day). The study area is mostly cultivated with cereals that, during the study period, were characterised by flag and bolting phenological phases. In the first, the leaf at the stem apex assumes a flag shape, while during the latter, the terminal part of the stem a barrel shape enlargement containing the ear appears. The study aim is the evaluation of the energy partition between sensible and latent heat fluxes, due to the increased water availability in a period characterised by a significant vegetation growth. The comparison between model results and flux tower measurements shows that both the latent heat flux and the other energy balance components are modelled with high accuracy. Moreover, the model well represents the variation in time of energy partition, which increases from 0.5 up to 0.65 in terms of evaporative fraction (Λ). Therefore a greater percent of energy is used to evapotranspiration after the rainfall events.

Demonstrating the value of community-based ('citizen science') observations for catchment modelling and characterisation

NASA Astrophysics Data System (ADS)

Starkey, Eleanor; Parkin, Geoff; Birkinshaw, Stephen; Large, Andy; Quinn, Paul; Gibson, Ceri

2017-05-01

Despite there being well-established meteorological and hydrometric monitoring networks in the UK, many smaller catchments remain ungauged. This leaves a challenge for characterisation, modelling, forecasting and management activities. Here we demonstrate the value of community-based ('citizen science') observations for modelling and understanding catchment response as a contribution to catchment science. The scheme implemented within the 42 km2 Haltwhistle Burn catchment, a tributary of the River Tyne in northeast England, has harvested and used quantitative and qualitative observations from the public in a novel way to effectively capture spatial and temporal river response. Community-based rainfall, river level and flood observations have been successfully collected and quality-checked, and used to build and run a physically-based, spatially-distributed catchment model, SHETRAN. Model performance using different combinations of observations is tested against traditionally-derived hydrographs. Our results show how the local network of community-based observations alongside traditional sources of hydro-information supports characterisation of catchment response more accurately than using traditional observations alone over both spatial and temporal scales. We demonstrate that these community-derived datasets are most valuable during local flash flood events, particularly towards peak discharge. This information is often missed or poorly represented by ground-based gauges, or significantly underestimated by rainfall radar, as this study clearly demonstrates. While community-based observations are less valuable during prolonged and widespread floods, or over longer hydrological periods of interest, they can still ground-truth existing traditional sources of catchment data to increase confidence during characterisation and management activities. Involvement of the public in data collection activities also encourages wider community engagement, and provides important information for catchment management.

Instantaneous frequency based newborn EEG seizure characterisation

NASA Astrophysics Data System (ADS)

Mesbah, Mostefa; O'Toole, John M.; Colditz, Paul B.; Boashash, Boualem

2012-12-01

The electroencephalogram (EEG), used to noninvasively monitor brain activity, remains the most reliable tool in the diagnosis of neonatal seizures. Due to their nonstationary and multi-component nature, newborn EEG seizures are better represented in the joint time-frequency domain than in either the time domain or the frequency domain. Characterising newborn EEG seizure nonstationarities helps to better understand their time-varying nature and, therefore, allow developing efficient signal processing methods for both modelling and seizure detection and classification. In this article, we used the instantaneous frequency (IF) extracted from a time-frequency distribution to characterise newborn EEG seizures. We fitted four frequency modulated (FM) models to the extracted IFs, namely a linear FM, a piecewise-linear FM, a sinusoidal FM, and a hyperbolic FM. Using a database of 30-s EEG seizure epochs acquired from 35 newborns, we were able to show that, depending on EEG channel, the sinusoidal and piecewise-linear FM models best fitted 80-98% of seizure epochs. To further characterise the EEG seizures, we calculated the mean frequency and frequency span of the extracted IFs. We showed that in the majority of the cases (>95%), the mean frequency resides in the 0.6-3 Hz band with a frequency span of 0.2-1 Hz. In terms of the frequency of occurrence of the four seizure models, the statistical analysis showed that there is no significant difference( p = 0.332) between the two hemispheres. The results also indicate that there is no significant differences between the two hemispheres in terms of the mean frequency ( p = 0.186) and the frequency span ( p = 0.302).

Cellular, Molecular and Functional Characterisation of YAC Transgenic Mouse Models of Friedreich Ataxia

PubMed Central

Anjomani Virmouni, Sara; Sandi, Chiranjeevi; Al-Mahdawi, Sahar; Pook, Mark A.

2014-01-01

Background Friedreich ataxia (FRDA) is an autosomal recessive neurodegenerative disorder, caused by a GAA repeat expansion mutation within intron 1 of the FXN gene. We have previously established and performed preliminary characterisation of several human FXN yeast artificial chromosome (YAC) transgenic FRDA mouse models containing GAA repeat expansions, Y47R (9 GAA repeats), YG8R (90 and 190 GAA repeats) and YG22R (190 GAA repeats). Methodology/Principal Findings We now report extended cellular, molecular and functional characterisation of these FXN YAC transgenic mouse models. FXN transgene copy number analysis of the FRDA mice demonstrated that the YG22R and Y47R lines each have a single copy of the FXN transgene while the YG8R line has two copies. Single integration sites of all transgenes were confirmed by fluorescence in situ hybridisation (FISH) analysis of metaphase and interphase chromosomes. We identified significant functional deficits, together with a degree of glucose intolerance and insulin hypersensitivity, in YG8R and YG22R FRDA mice compared to Y47R and wild-type control mice. We also confirmed increased somatic GAA repeat instability in the cerebellum and brain of YG22R and YG8R mice, together with significantly reduced levels of FXN mRNA and protein in the brain and liver of YG8R and YG22R compared to Y47R. Conclusions/Significance Together these studies provide a detailed characterisation of our GAA repeat expansion-based YAC transgenic FRDA mouse models that will help investigations of FRDA disease mechanisms and therapy. PMID:25198290

Variation of outdoor illumination as a function of solar elevation and light pollution

NASA Astrophysics Data System (ADS)

Spitschan, Manuel; Aguirre, Geoffrey K.; Brainard, David H.; Sweeney, Alison M.

2016-06-01

The illumination of the environment undergoes both intensity and spectral changes during the 24 h cycle of a day. Daylight spectral power distributions are well described by low-dimensional models such as the CIE (Commission Internationale de l’Éclairage) daylight model, but the performance of this model in non-daylight regimes is not characterised. We measured downwelling spectral irradiance across multiple days in two locations in North America: One rural location (Cherry Springs State Park, PA) with minimal anthropogenic light sources, and one city location (Philadelphia, PA). We characterise the spectral, intensity and colour changes and extend the existing CIE model for daylight to capture twilight components and the spectrum of the night sky.

Variation of outdoor illumination as a function of solar elevation and light pollution

PubMed Central

Spitschan, Manuel; Aguirre, Geoffrey K.; Brainard, David H.; Sweeney, Alison M.

2016-01-01

The illumination of the environment undergoes both intensity and spectral changes during the 24 h cycle of a day. Daylight spectral power distributions are well described by low-dimensional models such as the CIE (Commission Internationale de l’Éclairage) daylight model, but the performance of this model in non-daylight regimes is not characterised. We measured downwelling spectral irradiance across multiple days in two locations in North America: One rural location (Cherry Springs State Park, PA) with minimal anthropogenic light sources, and one city location (Philadelphia, PA). We characterise the spectral, intensity and colour changes and extend the existing CIE model for daylight to capture twilight components and the spectrum of the night sky. PMID:27272736

Variation of outdoor illumination as a function of solar elevation and light pollution.

PubMed

Spitschan, Manuel; Aguirre, Geoffrey K; Brainard, David H; Sweeney, Alison M

2016-06-07

The illumination of the environment undergoes both intensity and spectral changes during the 24 h cycle of a day. Daylight spectral power distributions are well described by low-dimensional models such as the CIE (Commission Internationale de l'Éclairage) daylight model, but the performance of this model in non-daylight regimes is not characterised. We measured downwelling spectral irradiance across multiple days in two locations in North America: One rural location (Cherry Springs State Park, PA) with minimal anthropogenic light sources, and one city location (Philadelphia, PA). We characterise the spectral, intensity and colour changes and extend the existing CIE model for daylight to capture twilight components and the spectrum of the night sky.

Review of pore network modelling of porous media: Experimental characterisations, network constructions and applications to reactive transport.

PubMed

Xiong, Qingrong; Baychev, Todor G; Jivkov, Andrey P

2016-09-01

Pore network models have been applied widely for simulating a variety of different physical and chemical processes, including phase exchange, non-Newtonian displacement, non-Darcy flow, reactive transport and thermodynamically consistent oil layers. The realism of such modelling, i.e. the credibility of their predictions, depends to a large extent on the quality of the correspondence between the pore space of a given medium and the pore network constructed as its representation. The main experimental techniques for pore space characterisation, including direct imaging, mercury intrusion porosimetry and gas adsorption, are firstly summarised. A review of the main pore network construction techniques is then presented. Particular focus is given on how such constructions are adapted to the data from experimentally characterised pore systems. Current applications of pore network models are considered, with special emphasis on the effects of adsorption, dissolution and precipitation, as well as biomass growth, on transport coefficients. Pore network models are found to be a valuable tool for understanding and predicting meso-scale phenomena, linking single pore processes, where other techniques are more accurate, and the homogenised continuum porous media, used by engineering community. Copyright © 2016 The Authors. Published by Elsevier B.V. All rights reserved.

Fanconi anaemia in South Africa: Past, present and future.

PubMed

Feben, C; Wainstein, T; Kromberg, J; Essop, F; Krause, A

2018-04-25

Fanconi anaemia (FA) is an inherited genetic disorder characterised by somatic anomalies, bone marrow failure and an increased predisposition to solid tumours and haematological malignancies. South African (SA) black and Afrikaner individuals are at higher than average risk for this condition owing to genetic founder mutations in certain Fanconi-associated genes. This review explores the epidemiology, clinical presentation, diagnostic modalities and recommended care of affected patients, focusing on the founder population groups in SA. The early diagnosis of FA is important and provides improved opportunities for early intervention, but remains challenging.

Mass media representations of the evidence as a possible deterrent to recommending exercise for the treatment of depression: Lessons five years after the extraordinary case of TREAD-UK.

PubMed

Ekkekakis, Panteleimon; Hartman, Mark E; Ladwig, Matthew A

2018-08-01

Exercise or physical activity are recommended options within stepped-care treatment models for depression. However, few physicians present these options to patients, in part because of the impression that the supporting evidence is weak or inconsistent. We speculate that the coocurrence of "counter-messaging" and deficient critical appraisal may lead to such impressions. We focus on TREAD-UK (ISRCTN16900744), the largest trial to investigate "whether physical activity can be an effective treatment for depression within primary care". In media statements, researchers declared that exercise was ineffective in lowering depression. We examined (a) the results of the trial, critiques, and rejoinders, (b) the impact on internet searches, and (c) whether TREAD-UK was critically appraised, as reflected in citing articles. We show that the results of TREAD-UK were misrepresented. The media campaign resulted in a fourfold increase in relevant internet searches. Of articles characterising the results, 57% adopted the interpretation that exercise failed to lower depression, whereas only 17% were critiques. We identify similarities to media portrayals of the OPERA (ISRCTN43769277), DEMO (NCT00103415), and DEMO-II trials (NCT00695552). We note a disconcerting trend of media campaigns that misrepresent the effects of exercise on depression and call for increased scrutiny in peer reviewing both pre- and post-publication.

Design of a beam shaping assembly and preliminary modelling of a treatment room for accelerator-based BNCT at CNEA.

PubMed

Burlon, A A; Girola, S; Valda, A A; Minsky, D M; Kreiner, A J; Sánchez, G

2011-12-01

This work reports on the characterisation of a neutron beam shaping assembly (BSA) prototype and on the preliminary modelling of a treatment room for BNCT within the framework of a research programme for the development and construction of an accelerator-based BNCT irradiation facility in Buenos Aires, Argentina. The BSA prototype constructed has been characterised by means of MCNP simulations as well as a set of experimental measurements performed at the Tandar accelerator at the National Atomic Energy Commission of Argentina. Copyright © 2011 Elsevier Ltd. All rights reserved.

Optical characteristics of waste stabilization ponds: recommendations for monitoring.

PubMed

Davies-Colley, R J; Craggs, R J; Park, J; Nagels, J W

2005-01-01

The optical character of waste stabilization ponds (WSPs) is of concern for several reasons. Algal photosynthesis, which produces oxygen for waste oxidation in WSPs, is influenced by attenuation of sunlight in ponds. Disinfection in WSPs is influenced by optical characteristics because solar UV exposure usually dominates inactivation. The optical nature of WSPs effluent also affects assimilation by receiving waters. Despite the importance of light behaviour in WSPs, few studies have been made of their optical characteristics. We discuss simple optical measures suitable for routine monitoring of WSPs (including at sites remote from laboratories): optical density of filtrates - an index of dissolved coloured organic (humic) matter, visual clarity - to provide an estimate of the beam attenuation coefficient (a fundamental quantity needed for optical modelling) colour (hue) - as an indicator of general WSP 'condition' and irradiance attenuation quantifying depth of light penetration. The value of optical characterisation of WSPs is illustrated with reference to optical data for WSPs in NZ (including high-rate algal ponds) treating dairy cattle wastewater versus domestic sewage. We encourage increased research on optical characteristics of WSPs and the incorporation of optical measures in monitoring and modelling of WSP performance.

Influence of smooth temperature variation on hotspot ignition

DOE PAGES

Reinbacher, Fynn; Regele, Jonathan David

2017-10-06

Autoignition in thermally stratified reactive mixtures originates in localised hotspots. The ignition behaviour is often characterised using linear temperature gradients and more recently constant temperature plateaus combined with temperature gradients. Acoustic timescale characterisation of plateau regions has been successfully used to characterise the type of mechanical disturbance that will be created from a plateau core ignition. This work combines linear temperature gradients with superelliptic cores in order to more accurately account for a local temperature maximum of finite size and the smooth temperature variation contained inside realistic hotspot centres. A one-step Arrhenius reaction is used to model a H 2–airmore » reactive mixture. Using the superelliptic approach a range of behaviours for temperature distributions are investigated by varying the temperature profile between the gradient only and plateau and gradient bounding cases. Each superelliptic case is compared to a respective plateau and gradient case where simple acoustic timescale characterisation may be performed. It is shown that hot spots equivalent with excitation-to-acoustic timescale ratios sufficiently greater than unity exhibit behaviour very similar to a simple plateau-gradient model. Furthermore, for larger hot spots with timescale ratios sufficiently less than unity the reaction behaviour is highly dependent on the smooth temperature profile contained within the core region.« less

Influence of smooth temperature variation on hotspot ignition

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reinbacher, Fynn; Regele, Jonathan David

Autoignition in thermally stratified reactive mixtures originates in localised hotspots. The ignition behaviour is often characterised using linear temperature gradients and more recently constant temperature plateaus combined with temperature gradients. Acoustic timescale characterisation of plateau regions has been successfully used to characterise the type of mechanical disturbance that will be created from a plateau core ignition. This work combines linear temperature gradients with superelliptic cores in order to more accurately account for a local temperature maximum of finite size and the smooth temperature variation contained inside realistic hotspot centres. A one-step Arrhenius reaction is used to model a H 2–airmore » reactive mixture. Using the superelliptic approach a range of behaviours for temperature distributions are investigated by varying the temperature profile between the gradient only and plateau and gradient bounding cases. Each superelliptic case is compared to a respective plateau and gradient case where simple acoustic timescale characterisation may be performed. It is shown that hot spots equivalent with excitation-to-acoustic timescale ratios sufficiently greater than unity exhibit behaviour very similar to a simple plateau-gradient model. Furthermore, for larger hot spots with timescale ratios sufficiently less than unity the reaction behaviour is highly dependent on the smooth temperature profile contained within the core region.« less

Quantification of uncertainty in aerosol optical thickness retrieval arising from aerosol microphysical model and other sources, applied to Ozone Monitoring Instrument (OMI) measurements

NASA Astrophysics Data System (ADS)

Määttä, A.; Laine, M.; Tamminen, J.; Veefkind, J. P.

2014-05-01

Satellite instruments are nowadays successfully utilised for measuring atmospheric aerosol in many applications as well as in research. Therefore, there is a growing need for rigorous error characterisation of the measurements. Here, we introduce a methodology for quantifying the uncertainty in the retrieval of aerosol optical thickness (AOT). In particular, we concentrate on two aspects: uncertainty due to aerosol microphysical model selection and uncertainty due to imperfect forward modelling. We apply the introduced methodology for aerosol optical thickness retrieval of the Ozone Monitoring Instrument (OMI) on board NASA's Earth Observing System (EOS) Aura satellite, launched in 2004. We apply statistical methodologies that improve the uncertainty estimates of the aerosol optical thickness retrieval by propagating aerosol microphysical model selection and forward model error more realistically. For the microphysical model selection problem, we utilise Bayesian model selection and model averaging methods. Gaussian processes are utilised to characterise the smooth systematic discrepancies between the measured and modelled reflectances (i.e. residuals). The spectral correlation is composed empirically by exploring a set of residuals. The operational OMI multi-wavelength aerosol retrieval algorithm OMAERO is used for cloud-free, over-land pixels of the OMI instrument with the additional Bayesian model selection and model discrepancy techniques introduced here. The method and improved uncertainty characterisation is demonstrated by several examples with different aerosol properties: weakly absorbing aerosols, forest fires over Greece and Russia, and Sahara desert dust. The statistical methodology presented is general; it is not restricted to this particular satellite retrieval application.

Predicted optimum ambient temperatures for broiler chickens to dissipate metabolic heat do not affect performance or improve breast muscle quality

PubMed Central

Zahoor, I.; Mitchell, M.A.; Hall, S.; Beard, P.M.; Gous, R.M.; De Koning, D.J.; Hocking, P.M.

2016-01-01

Abstract An experiment was conducted to test the hypothesis that muscle damage in fast-growing broiler chickens is associated with an ambient temperature that does not permit the birds to lose metabolic heat resulting in physiological heat stress and a reduction in meat quality.The experiment was performed in 4 climate chambers and was repeated in 2 trials using a total of 200 male broiler chickens. Two treatments compared the recommended temperature profile and a cool regimen. The cool regimen was defined by a theoretical model that determined the environmental temperature that would enable heat generated by the bird to be lost to the environment.There were no differences in growth rate or feed intake between the two treatments. Breast muscles from birds on the recommended temperature regimen were lighter, less red and more yellow than those from the cool temperature regimen. There were no differences in moisture loss or shear strength but stiffness was greater in breast muscle from birds housed in the cool compared to the recommended regimen.Histopathological changes in the breast muscle were similar in both treatments and were characterised by mild to severe myofibre degeneration and necrosis with regeneration, fibrosis and adipocyte infiltration. There was no difference in plasma creatine kinase activity, a measure of muscle cell damage, between the two treatments consistent with the absence of differences in muscle pathology.It was concluded that breast muscle damage in fast-growing broiler chickens was not the result of an inability to lose metabolic heat at recommended ambient temperatures. The results suggest that muscle cell damage and breast meat quality concerns in modern broiler chickens are related to genetic selection for muscle yields and that genetic selection to address breast muscle integrity in a balanced breeding programme is imperative. PMID:26670305

Predicted optimum ambient temperatures for broiler chickens to dissipate metabolic heat do not affect performance or improve breast muscle quality.

PubMed

Zahoor, I; Mitchell, M A; Hall, S; Beard, P M; Gous, R M; De Koning, D J; Hocking, P M

2016-01-01

An experiment was conducted to test the hypothesis that muscle damage in fast-growing broiler chickens is associated with an ambient temperature that does not permit the birds to lose metabolic heat resulting in physiological heat stress and a reduction in meat quality. The experiment was performed in 4 climate chambers and was repeated in 2 trials using a total of 200 male broiler chickens. Two treatments compared the recommended temperature profile and a cool regimen. The cool regimen was defined by a theoretical model that determined the environmental temperature that would enable heat generated by the bird to be lost to the environment. There were no differences in growth rate or feed intake between the two treatments. Breast muscles from birds on the recommended temperature regimen were lighter, less red and more yellow than those from the cool temperature regimen. There were no differences in moisture loss or shear strength but stiffness was greater in breast muscle from birds housed in the cool compared to the recommended regimen. Histopathological changes in the breast muscle were similar in both treatments and were characterised by mild to severe myofibre degeneration and necrosis with regeneration, fibrosis and adipocyte infiltration. There was no difference in plasma creatine kinase activity, a measure of muscle cell damage, between the two treatments consistent with the absence of differences in muscle pathology. It was concluded that breast muscle damage in fast-growing broiler chickens was not the result of an inability to lose metabolic heat at recommended ambient temperatures. The results suggest that muscle cell damage and breast meat quality concerns in modern broiler chickens are related to genetic selection for muscle yields and that genetic selection to address breast muscle integrity in a balanced breeding programme is imperative.

Polarimetry of hot-Jupiter systems and radiative transfer models of planetary atmospheres

NASA Astrophysics Data System (ADS)

Bott, Kimberly; Bailey, Jeremy; Kedziora-Chudczer, Lucyna; Cotton, Daniel; Marshall, Jonathan

2016-01-01

Thousands of exoplanets and planet candidates have been detected. The next important step in the contexts of astrobiology, planetary classification and planet formation is to characterise them. My dissertation aims to provide further characterisation to four hot Jupiter exoplanets: the relatively well-characterised HD 189733b, WASP-18b which is nearly large enough to be a brown dwarf, and two minimally characterised non-transiting hot Jupiters: HD 179949b and tau Bootis b.For the transiting planets, this is done through two means. First, published data from previous observations of the secondary eclipse (and transit for HD 189733b) are compared to models created with the Versatile Software for the Transfer of Atmospheric Radiation (VSTAR). Second, new polarimetric observations from the HIgh Precision Polarimetric Instrument are compared to Lambert-Rayleigh polarised light phase curves. For the non-transiting planets, only the polarimetric measurements are compared to models, but toy radiative transfer models are produced for concept. As an introduction to radiative transfer models, VSTAR is applied to the planet Uranus to measure its D/H isotope ratio. A preliminary value is derived for D/H in one part of the atmosphere.Fitting a single atmospheric model to the transmitted, reflected, and emitted light, I confirm the presence of water on HD 189733b, and present a new temperature profile and cloud profile for the planet. For WASP-18b, I confirm the general shape of the temperature profile. No conclusions can be drawn from the polarimetric measurements for the non-transiting planets. I detect a possible variation with phase for transiting planet WASP-18b but cannot confirm it at this time. Alternative sources to the planet are discussed. For HD 189733b, I detect possible variability in the polarised light at the scale expected for the planet. However, the data are also statistically consistent with no variability and are not matched to the phase of the planet.

Performance characterisation of a passive cavitation detector optimised for subharmonic periodic shock waves from acoustic cavitation in MHz and sub-MHz ultrasound.

PubMed

Johansen, Kristoffer; Song, Jae Hee; Prentice, Paul

2018-05-01

We describe the design, construction and characterisation of a broadband passive cavitation detector, with the specific aim of detecting low frequency components of periodic shock waves, with high sensitivity. A finite element model is used to guide selection of matching and backing layers for the shock wave passive cavitation detector (swPCD), and the performance is evaluated against a commercially available device. Validation of the model, and characterisation of the swPCD is achieved through experimental detection of laser-plasma bubble collapse shock waves. The final swPCD design is 20 dB more sensitive to the subharmonic component, from acoustic cavitation driven at 220 kHz, than the comparable commercial device. This work may be significant for monitoring cavitation in medical applications, where sensitive detection is critical, and higher frequencies are more readily absorbed by tissue. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

Study of the uncertainty in estimation of the exposure of non-human biota to ionising radiation.

PubMed

Avila, R; Beresford, N A; Agüero, A; Broed, R; Brown, J; Iospje, M; Robles, B; Suañez, A

2004-12-01

Uncertainty in estimations of the exposure of non-human biota to ionising radiation may arise from a number of sources including values of the model parameters, empirical data, measurement errors and biases in the sampling. The significance of the overall uncertainty of an exposure assessment will depend on how the estimated dose compares with reference doses used for risk characterisation. In this paper, we present the results of a study of the uncertainty in estimation of the exposure of non-human biota using some of the models and parameters recommended in the FASSET methodology. The study was carried out for semi-natural terrestrial, agricultural and marine ecosystems, and for four radionuclides (137Cs, 239Pu, 129I and 237Np). The parameters of the radionuclide transfer models showed the highest sensitivity and contributed the most to the uncertainty in the predictions of doses to biota. The most important ones were related to the bioavailability and mobility of radionuclides in the environment, for example soil-to-plant transfer factors, the bioaccumulation factors for marine biota and the gut uptake fraction for terrestrial mammals. In contrast, the dose conversion coefficients showed low sensitivity and contributed little to the overall uncertainty. Radiobiological effectiveness contributed to the overall uncertainty of the dose estimations for alpha emitters although to a lesser degree than a number of transfer model parameters.

Global population trends and policy options.

PubMed

Ezeh, Alex C; Bongaarts, John; Mberu, Blessing

2012-07-14

Rapid population growth is a threat to wellbeing in the poorest countries, whereas very low fertility increasingly threatens the future welfare of many developed countries. The mapping of global trends in population growth from 2005-10 shows four distinct patterns. Most of the poorest countries, especially in sub-Saharan Africa, are characterised by rapid growth of more than 2% per year. Moderate annual growth of 1-2% is concentrated in large countries, such as India and Indonesia, and across north Africa and western Latin America. Whereas most advanced-economy countries and large middle-income countries, such as China and Brazil, are characterised by low or no growth (0-1% per year), most of eastern Europe, Japan, and a few western European countries are characterised by population decline. Countries with rapid growth face adverse social, economic, and environmental pressures, whereas those with low or negative growth face rapid population ageing, unsustainable burdens on public pensions and health-care systems, and slow economic growth. Countries with rapid growth should consider the implementation of voluntary family planning programmes as their main policy option to reduce the high unmet need for contraception, unwanted pregnancies, and probirth reproductive norms. In countries with low or negative growth, policies to address ageing and very low fertility are still evolving. Further research into the potential effect of demographic policies on other social systems, social groups, and fertility decisions and trends is therefore recommended. Copyright © 2012 Elsevier Ltd. All rights reserved.

Characterisation of longitudinal variation in photonic crystal fibre

NASA Astrophysics Data System (ADS)

Francis-Jones, Robert J. A.; Mosley, Peter J.

2016-10-01

We present a method by which the degree of longitudinal variation in photonic crystal fibre (PCF) may be characterised through seeded four-wave mixing (FWM). Using an iterative numerical reconstruction, we created a model PCF that displays similar FWM phasematching properties across all measured length scales. Our results demonstrate that the structure of our PCF varies by less than 1% and that the characteristic length of the variations is approximately 15 cm.

Materials Characterisation and Analysis for Flow Simulation of Liquid Resin Infusion

NASA Astrophysics Data System (ADS)

Sirtautas, J.; Pickett, A. K.; George, A.

2015-06-01

Liquid Resin Infusion (LRI) processes including VARI and VARTM have received increasing attention in recent years, particularly for infusion of large parts, or for low volume production. This method avoids the need for costly matched metal tooling as used in Resin Transfer Moulding (RTM) and can provide fast infusion if used in combination with flow media. Full material characterisation for LRI analysis requires models for three dimensional fabric permeability as a function of fibre volume content, fabric through-thickness compliance as a function of resin pressure, flow media permeability and resin viscosity. The characterisation of fabric relaxation during infusion is usually determined from cyclic compaction tests on saturated fabrics. This work presents an alternative method to determine the compressibility by using LRI flow simulation and fitting a model to experimental thickness measurements during LRI. The flow media is usually assumed to have isotropic permeability, but this work shows greater simulation accuracy from combining the flow media with separation plies as a combined orthotropic material. The permeability of this combined media can also be determined by fitting the model with simulation to LRI flow measurements. The constitutive models and the finite element solution were validated by simulation of the infusion of a complex aerospace demonstrator part.

The use of deconvolution techniques to identify the fundamental mixing characteristics of urban drainage structures.

PubMed

Stovin, V R; Guymer, I; Chappell, M J; Hattersley, J G

2010-01-01

Mixing and dispersion processes affect the timing and concentration of contaminants transported within urban drainage systems. Hence, methods of characterising the mixing effects of specific hydraulic structures are of interest to drainage network modellers. Previous research, focusing on surcharged manholes, utilised the first-order Advection-Dispersion Equation (ADE) and Aggregated Dead Zone (ADZ) models to characterise dispersion. However, although systematic variations in travel time as a function of discharge and surcharge depth have been identified, the first order ADE and ADZ models do not provide particularly good fits to observed manhole data, which means that the derived parameter values are not independent of the upstream temporal concentration profile. An alternative, more robust, approach utilises the system's Cumulative Residence Time Distribution (CRTD), and the solute transport characteristics of a surcharged manhole have been shown to be characterised by just two dimensionless CRTDs, one for pre- and the other for post-threshold surcharge depths. Although CRTDs corresponding to instantaneous upstream injections can easily be generated using Computational Fluid Dynamics (CFD) models, the identification of CRTD characteristics from non-instantaneous and noisy laboratory data sets has been hampered by practical difficulties. This paper shows how a deconvolution approach derived from systems theory may be applied to identify the CRTDs associated with urban drainage structures.

[Adult attention deficit/hyperactivity disorder, associated symptoms and comorbid psychiatric disorders: diagnosis and pharmacological treatment].

PubMed

Paslakis, G; Schredl, M; Alm, B; Sobanski, E

2013-08-01

Adult attention deficit/hyperactivity disorder (ADHD) is characterised by inattention and/or hyperactivity and impulsivity and is a frequent psychiatric disorder with childhood onset. In addition to core symptoms, patients often experience associated symptoms like emotional dysregulation or low self-esteem and suffer from comorbid disorders, particularly depressive episodes, substance abuse, anxiety or sleep disorders. It is recommended to include associated symptoms and comorbid psychiatric disorders in the diagnostic set-up and in the treatment plan. Comorbid psychiatric disorders should be addressed with disorder-specific therapies while associated symptoms also often improve with treatment of the ADHD core symptoms. The most impairing psychiatric disorder should be treated first. This review presents recommendations for differential diagnosis and treatment of adult ADHD with associated symptoms and comorbid psychiatric disorders with respect to internationally published guidelines, clinical trials and expert opinions. © Georg Thieme Verlag KG Stuttgart · New York.

[Healthy life years (HLY) comprehensive indicator of health situation--recommended by European Union].

PubMed

Gromulska, Lucyna; Wysocki, Mirosław J; Goryński, Paweł

2008-01-01

This article presents Healthy Life Years (HLY) indicator of functional health status, its application in the field of public health research and monitoring, method of calculation, idea of its construction and relation of HLY to other health status indicators e.g. life expectancy, quality adjusted life years. Current data on HLY in the EU member states are also presented. HLY indicator is one of structural indicators, recommended by European Council to deliver information on the progress of implementation of the Lisbon Strategy resolutions, which main principle is development of knowledge-based economy characterised by growth, social cohesion and respect for environment. HLY shifts the focus from quantity of years of life to its quality, full-productivity health of the population, thus conveying information not only on health status but also referring to the fields--other than medicine or social sciences--such as: finances, economy, politics, development.

[Portuguese Respiratory Society guidelines for the management of community-acquired pneumonia in immunocompetent adults].

PubMed

2003-01-01

The Portuguese Respiratory Society makes a series of recommendations as to the state of the art of the diagnostic, therapeutic and preventive approach to community-acquired pneumonia in immunocompetent adults in Portugal. These proposals should be regarded as general guidelines and are not intended to replace the clinical sense used in resolving each individual case. Our main goal is to stratify the patients according to the risk of morbidity and mortality in order to justify the following decisions more rationally: the choice of place of treatment (outpatient or inpatient), diagnostic tests and antimicrobial therapy. We also make a set of recommendations for the prevention of CAP. We plan to conduct multi-centre prospective studies, preferably in collaboration with other scientific societies, in order to be able to characterise the situation in Portugal more accurately and regularly update this document.

Nutrition economics – characterising the economic and health impact of nutrition

PubMed Central

Lenoir-Wijnkoop, I.; Dapoigny, M.; Dubois, D.; van Ganse, E.; Gutiérrez-Ibarluzea, I.; Hutton, J.; Jones, P.; Mittendorf, T.; Poley, M. J.; Salminen, S.; Nuijten, M. J. C.

2011-01-01

There is a new merging of health economics and nutrition disciplines to assess the impact of diet on health and disease prevention and to characterise the health and economic aspects of specific changes in nutritional behaviour and nutrition recommendations. A rationale exists for developing the field of nutrition economics which could offer a better understanding of both nutrition, in the context of having a significant influence on health outcomes, and economics, in order to estimate the absolute and relative monetary impact of health measures. For this purpose, an expert meeting assessed questions aimed at clarifying the scope and identifying the key issues that should be taken into consideration in developing nutrition economics as a discipline that could potentially address important questions. We propose a first multidisciplinary outline for understanding the principles and particular characteristics of this emerging field. We summarise here the concepts and the observations of workshop participants and propose a basic setting for nutrition economics and health outcomes research as a novel discipline to support nutrition, health economics and health policy development in an evidence and health-benefit-based manner. PMID:20797310

Nutrition economics - characterising the economic and health impact of nutrition.

PubMed

Lenoir-Wijnkoop, I; Dapoigny, M; Dubois, D; van Ganse, E; Gutiérrez-Ibarluzea, I; Hutton, J; Jones, P; Mittendorf, T; Poley, M J; Salminen, S; Nuijten, M J C

2011-01-01

There is a new merging of health economics and nutrition disciplines to assess the impact of diet on health and disease prevention and to characterise the health and economic aspects of specific changes in nutritional behaviour and nutrition recommendations. A rationale exists for developing the field of nutrition economics which could offer a better understanding of both nutrition, in the context of having a significant influence on health outcomes, and economics, in order to estimate the absolute and relative monetary impact of health measures. For this purpose, an expert meeting assessed questions aimed at clarifying the scope and identifying the key issues that should be taken into consideration in developing nutrition economics as a discipline that could potentially address important questions. We propose a first multidisciplinary outline for understanding the principles and particular characteristics of this emerging field. We summarise here the concepts and the observations of workshop participants and propose a basic setting for nutrition economics and health outcomes research as a novel discipline to support nutrition, health economics and health policy development in an evidence and health-benefit-based manner.

Effects of blanching on polyphenol stability of innovative paste-like parsley (Petroselinum crispum (Mill.) Nym ex A. W. Hill) and marjoram (Origanum majorana L.) products.

PubMed

Kaiser, Andrea; Carle, Reinhold; Kammerer, Dietmar R

2013-06-01

Fresh herbs were water- and steam-blanched at 90-100°C and 100°C, respectively, for 1-10 min and 30 s to 7 min for parsley and marjoram, respectively, and subsequently minced to obtain a paste. For the first time, phenolic compounds of unheated marjoram were characterised by high-performance liquid chromatography coupled to mass spectrometry (HPLC-MS). Hereby, 10 phenolics were detected. Among them, apigenin-glucuronide, lucenin-2 and lithospermic acid were tentatively identified for the first time. In unheated parsley, apart from the major compound apiin, 10 further phenolics were characterised including several p-coumaric acid derivatives which were newly detected. Except for apiin, short-time steam- and water-blanching (1 min), respectively, did not cause significant losses of phenolic compounds, and thus proved to be the most suitable measures to ensure polyphenol retention. Consequently, blanching is a recommendable initial operation in the processing of parsley and marjoram into novel paste-like products. Copyright © 2012 Elsevier Ltd. All rights reserved.

Blood pressure targets in type 2 diabetes. Evidence against or in favour of an aggressive approach.

PubMed

Mancia, Giuseppe; Grassi, Guido

2018-03-01

When associated with high blood pressure, type 2 diabetes mellitus is characterised by a high risk of adverse cardiovascular (CV) and renal outcomes. However, both can be effectively reduced by antihypertensive treatment. Current guidelines on the treatment of hypertension emphasize the need to effectively treat high blood pressure in diabetic individuals, but their recommendations differ in terms of the optimal target blood pressure value to aim for in order to maximise CV and renal protection. In some guidelines the recommended target blood pressure values are <140/90 mmHg (systolic/diastolic), whereas in others, blood pressure values close or even less than 130/80 mmHg are recommended. This paper will discuss the evidence for and against a conservative or more aggressive blood pressure target for treated diabetic hypertensive individuals based on the evidence provided by randomised trials, trial meta-analyses and large observational studies. Based on the available evidence, it appears that blood pressure targets will probably have to be lower than <140/90 mmHg, and that values approaching 130/80 mmHg should be recommended. However, evidence in favour of even lower systolic values, i.e. <130 mmHg, is limited and is definitively against a reduction to <120 mmHg.

Modelling the anaerobic digestion of solid organic waste - Substrate characterisation method for ADM1 using a combined biochemical and kinetic parameter estimation approach.

PubMed

Poggio, D; Walker, M; Nimmo, W; Ma, L; Pourkashanian, M

2016-07-01

This work proposes a novel and rigorous substrate characterisation methodology to be used with ADM1 to simulate the anaerobic digestion of solid organic waste. The proposed method uses data from both direct substrate analysis and the methane production from laboratory scale anaerobic digestion experiments and involves assessment of four substrate fractionation models. The models partition the organic matter into a mixture of particulate and soluble fractions with the decision on the most suitable model being made on quality of fit between experimental and simulated data and the uncertainty of the calibrated parameters. The method was tested using samples of domestic green and food waste and using experimental data from both short batch tests and longer semi-continuous trials. The results showed that in general an increased fractionation model complexity led to better fit but with increased uncertainty. When using batch test data the most suitable model for green waste included one particulate and one soluble fraction, whereas for food waste two particulate fractions were needed. With richer semi-continuous datasets, the parameter estimation resulted in less uncertainty therefore allowing the description of the substrate with a more complex model. The resulting substrate characterisations and fractionation models obtained from batch test data, for both waste samples, were used to validate the method using semi-continuous experimental data and showed good prediction of methane production, biogas composition, total and volatile solids, ammonia and alkalinity. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Evaluation of synthetic vascular grafts in a mouse carotid grafting model.

PubMed

Chan, Alex H P; Tan, Richard P; Michael, Praveesuda L; Lee, Bob S L; Vanags, Laura Z; Ng, Martin K C; Bursill, Christina A; Wise, Steven G

2017-01-01

Current animal models for the evaluation of synthetic grafts are lacking many of the molecular tools and transgenic studies available to other branches of biology. A mouse model of vascular grafting would allow for the study of molecular mechanisms of graft failure, including in the context of clinically relevant disease states. In this study, we comprehensively characterise a sutureless grafting model which facilitates the evaluation of synthetic grafts in the mouse carotid artery. Using conduits electrospun from polycaprolactone (PCL) we show the gradual development of a significant neointima within 28 days, found to be greatest at the anastomoses. Histological analysis showed temporal increases in smooth muscle cell and collagen content within the neointima, demonstrating its maturation. Endothelialisation of the PCL grafts, assessed by scanning electron microscopy (SEM) analysis and CD31 staining, was near complete within 28 days, together replicating two critical aspects of graft performance. To further demonstrate the potential of this mouse model, we used longitudinal non-invasive tracking of bone-marrow mononuclear cells from a transgenic mouse strain with a dual reporter construct encoding both luciferase and green fluorescent protein (GFP). This enabled characterisation of mononuclear cell homing and engraftment to PCL using bioluminescence imaging and histological staining over time (7, 14 and 28 days). We observed peak luminescence at 7 days post-graft implantation that persisted until sacrifice at 28 days. Collectively, we have established and characterised a high-throughput model of grafting that allows for the evaluation of key clinical drivers of graft performance.

Severe gout: Strategies and innovations for effective management.

PubMed

Pascual, Eliseo; Andrés, Mariano; Vázquez-Mellado, Janitzia; Dalbeth, Nicola

2017-10-01

Severe gout is characterised by frequent polyarticular flares, numerous tophi, joint damage, and musculoskeletal disability. This is a preventable condition and in many cases, represents a disease that has been insufficiently managed for years. Standard management recommendations may be insufficient for patients with severe gout; these patients frequently require intensive individualised pharmacological management with combinations of urate-lowering therapy and anti-inflammatory agents. In this article, we aim to integrate recent therapeutic advances to provide a practical framework for optimal management of severe gout. Copyright © 2017 Société française de rhumatologie. Published by Elsevier SAS. All rights reserved.

REM sleep behaviour disorder - More than just a parasomnia.

PubMed

Coeytaux, Alessandra; Wong, Keith; Grunstein, Ron; Lewis, Simon J G

2013-11-01

Rapid eye movement (REM) sleep behaviour disorder (RBD) is a parasomnia characterised by loss of the usual muscle atonia that occurs during REM sleep, allowing patients to act out their dreams. This article aims to draw attention to RBD, allowing early recognition and treatment. As RBD patients are at high risk of hurting themselves and their bed partners while acting out their dreams, improving safety within the bedroom environment and treatment with exogenous melatonin or clonazepam are recommended. Longitudinal studies have shown that the onset of idiopathic RBD may be an early warning sign of specific neurodegenerative diseases.

Isolation and characterisation of cancer stem cells from canine osteosarcoma.

PubMed

Wilson, H; Huelsmeyer, M; Chun, R; Young, K M; Friedrichs, K; Argyle, D J

2008-01-01

There is increasing evidence that cancer is a stem cell disease. This study sought to isolate and characterise cancer stem cells from canine osteosarcoma. One human and three canine cell lines were cultured in non-adherent culture conditions using serum-starved, semi-solid media. Primitive sarcosphere colonies from all cell lines were identified under these conditions and were characterised using molecular and cytochemical techniques for embryonic stem cell markers. Expression of the embryonic stem cell-associated genes Nanog, Oct4 and STAT3 indicated a primitive phenotype. Sarcospheres could be reproduced consistently when passaged multiple times and produced adherent cell cultures when returned to normal growth conditions. Similarities between human and canine osteosarcoma cell lines add credence to the potential of the dog as a model for human disease.

Clustering of adherence to personalised dietary recommendations and changes in healthy eating index within the Food4Me study.

PubMed

Livingstone, Katherine M; Celis-Morales, Carlos; Lara, Jose; Woolhead, Clara; O'Donovan, Clare B; Forster, Hannah; Marsaux, Cyril Fm; Macready, Anna L; Fallaize, Rosalind; Navas-Carretero, Santiago; San-Cristobal, Rodrigo; Kolossa, Silvia; Tsirigoti, Lydia; Lambrinou, Christina P; Moschonis, George; Surwiłło, Agnieszka; Drevon, Christian A; Manios, Yannis; Traczyk, Iwona; Gibney, Eileen R; Brennan, Lorraine; Walsh, Marianne C; Lovegrove, Julie A; Martinez, J Alfredo; Saris, Wim Hm; Daniel, Hannelore; Gibney, Mike; Mathers, John C

2016-12-01

To characterise clusters of individuals based on adherence to dietary recommendations and to determine whether changes in Healthy Eating Index (HEI) scores in response to a personalised nutrition (PN) intervention varied between clusters. Food4Me study participants were clustered according to whether their baseline dietary intakes met European dietary recommendations. Changes in HEI scores between baseline and month 6 were compared between clusters and stratified by whether individuals received generalised or PN advice. Pan-European, Internet-based, 6-month randomised controlled trial. Adults aged 18-79 years (n 1480). Individuals in cluster 1 (C1) met all recommended intakes except for red meat, those in cluster 2 (C2) met two recommendations, and those in cluster 3 (C3) and cluster 4 (C4) met one recommendation each. C1 had higher intakes of white fish, beans and lentils and low-fat dairy products and lower percentage energy intake from SFA (P<0·05). C2 consumed less chips and pizza and fried foods than C3 and C4 (P<0·05). C1 were lighter, had lower BMI and waist circumference than C3 and were more physically active than C4 (P<0·05). More individuals in C4 were smokers and wanted to lose weight than in C1 (P<0·05). Individuals who received PN advice in C4 reported greater improvements in HEI compared with C3 and C1 (P<0·05). The cluster where the fewest recommendations were met (C4) reported greater improvements in HEI following a 6-month trial of PN whereas there was no difference between clusters for those randomised to the Control, non-personalised dietary intervention.

Discharge processes and an electrical model of atmospheric pressure plasma jets in argon

NASA Astrophysics Data System (ADS)

Fang, Zhi; Shao, Tao; Yang, Jing; Zhang, Cheng

2016-01-01

In this paper, an atmospheric pressure plasma discharge in argon was generated using a needle-to-ring electrode configuration driven by a sinusoidal excitation voltage. The electric discharge processes and discharge characteristics were investigated by inspecting the voltage-current waveforms, Lissajous curves and lighting emission images. The change in discharge mode with applied voltage amplitude was studied and characterised, and three modes of corona discharge, dielectric barrier discharge (DBD) and jet discharge were identified, which appeared in turn with increasing applied voltage and can be distinguished clearly from the measured voltage-current waveforms, light-emission images and the changing gradient of discharge power with applied voltage. Based on the experimental results and discharge mechanism analysis, an equivalent electrical model and the corresponding equivalent circuit for characterising the whole discharge processes accurately was proposed, and the three discharge stages were characterised separately. A voltage-controlled current source (VCCS) associated with a resistance and a capacitance were used to represent the DBD stage, and the plasma plume and corona discharge were modelled by a variable capacitor in series with a variable resistor. Other factors that can influence the discharge, such as lead and stray capacitance values of the circuit, were also considered in the proposed model. Contribution to the Topical Issue "Recent Breakthroughs in Microplasma Science and Technology", edited by Kurt Becker, Jose Lopez, David Staack, Klaus-Dieter Weltmann and Wei Dong Zhu.

Modelling multiple cycles of static and dynamic recrystallisation using a fully implicit isotropic material model based on dislocation density

NASA Astrophysics Data System (ADS)

Jansen van Rensburg, Gerhardus J.; Kok, Schalk; Wilke, Daniel N.

2018-03-01

This paper presents the development and numerical implementation of a state variable based thermomechanical material model, intended for use within a fully implicit finite element formulation. Plastic hardening, thermal recovery and multiple cycles of recrystallisation can be tracked for single peak as well as multiple peak recrystallisation response. The numerical implementation of the state variable model extends on a J2 isotropic hypo-elastoplastic modelling framework. The complete numerical implementation is presented as an Abaqus UMAT and linked subroutines. Implementation is discussed with detailed explanation of the derivation and use of various sensitivities, internal state variable management and multiple recrystallisation cycle contributions. A flow chart explaining the proposed numerical implementation is provided as well as verification on the convergence of the material subroutine. The material model is characterised using two high temperature data sets for cobalt and copper. The results of finite element analyses using the material parameter values characterised on the copper data set are also presented.

Mobilising Open Access to Research Data: Recommendations from the RECODE project

NASA Astrophysics Data System (ADS)

Finn, Rachel; Sveinsdottir, Thordis

2015-04-01

This paper will introduce the findings and policy recommendations from the FP7 project RECODE (Policy RECommendations for Open Access to Research Data in Europe) which aims to leverage existing networks, communities and projects to address challenges within the open access and data dissemination and preservation sector. We will introduce the key recommendations, which provide solutions relevant to opening access to PSI. The project is built on case study research of five scientific disciplines with the aim of recognizing and working with disciplinary fragmentation associated with open access to research data. The RECODE findings revealed that the mobilisation of open access to research data requires a partnership approach for developing a coherent and flexible ecosystem that is easy and transparent to embed in research practice and process. As such, the development of open access to research data needs to be: • Informed by research practices and processes in different fields • Supported by an integrated institutional and technological data infrastructure and guided by ethical and regulatory frameworks • Underpinned by infrastructure and guiding frameworks that allow for differences in disciplinary research and data management practices • Characterised by a partnership approach involving the key stakeholders, researchers, and institutions The proposed presentation will examine each of these aspects in detail and use information and good practices from the RECODE project to consider how stakeholders within the PSI movement might action each of these points. It will also highlight areas where RECODE findings and good practice recommendations have clear relevance for the PSI sector.

Hydrogeochemical assessment of mine-impacted water and sediment of iron ore mining

NASA Astrophysics Data System (ADS)

Nur Atirah Affandi, Fatin; Kusin, Faradiella Mohd; Aqilah Sulong, Nur; Madzin, Zafira

2018-04-01

This study was carried out to evaluate the hydrogeochemical behaviour of mine-impacted water and sediment of a former iron ore mining area. Sampling of mine water and sediment were carried out at selected locations within the mine including the former mining ponds, mine tailings and the nearby stream. The water samples were analysed for their hydrochemical facies, major and trace elements including heavy metals. The water in the mining ponds and the mine tailings was characterised as highly acidic (pH 2.54-3.07), but has near-neutral pH in the nearby stream. Results indicated that Fe and Mn in water have exceeded the recommended guidelines values and was also supported by the results of geochemical modelling. The results also indicated that sediments in the mining area were contaminated with Cd and As as shown by the potential ecological risk index values. The total risk index of heavy metals in the sediment were ranked in the order of Cd>As>Pb>Cu>Zn>Cr. Overall, the extent of potential ecological risks of the mining area were categorised as having low to moderate ecological risk.

Monte Carlo study of a 60Co calibration field of the Dosimetry Laboratory Seibersdorf.

PubMed

Hranitzky, C; Stadtmann, H

2007-01-01

The gamma radiation fields of the reference irradiation facility of the Dosimetry Laboratory Seibersdorf with collimated beam geometry are used for calibrating radiation protection dosemeters. A close-to-reality simulation model of the facility including the complex geometry of a 60Co source was set up using the Monte Carlo code MCNP. The goal of this study is to characterise the radionuclide gamma calibration field and resulting air-kerma distributions inside the measurement hall with a total of 20 m in length. For the whole range of source-detector-distances (SDD) along the central beam axis, simulated and measured relative air-kerma values are within +/-0.6%. Influences on the accuracy of the simulation results are investigated, including e.g., source mass density effects or detector volume dependencies. A constant scatter contribution from the lead ring-collimator of approximately 1% and an increasing scatter contribution from the concrete floor for distances above 7 m are identified, resulting in a total air-kerma scatter contribution below 5%, which is in accordance to the ISO 4037-1 recommendations.

Magnetic resonance imaging for the detection, localisation, and characterisation of prostate cancer: recommendations from a European consensus meeting.

PubMed

Dickinson, Louise; Ahmed, Hashim U; Allen, Clare; Barentsz, Jelle O; Carey, Brendan; Futterer, Jurgen J; Heijmink, Stijn W; Hoskin, Peter J; Kirkham, Alex; Padhani, Anwar R; Persad, Raj; Puech, Philippe; Punwani, Shonit; Sohaib, Aslam S; Tombal, Bertrand; Villers, Arnauld; van der Meulen, Jan; Emberton, Mark

2011-04-01

Multiparametric magnetic resonance imaging (mpMRI) may have a role in detecting clinically significant prostate cancer in men with raised serum prostate-specific antigen levels. Variations in technique and the interpretation of images have contributed to inconsistency in its reported performance characteristics. Our aim was to make recommendations on a standardised method for the conduct, interpretation, and reporting of prostate mpMRI for prostate cancer detection and localisation. A consensus meeting of 16 European prostate cancer experts was held that followed the UCLA-RAND Appropriateness Method and facilitated by an independent chair. Before the meeting, 520 items were scored for "appropriateness" by panel members, discussed face to face, and rescored. Agreement was reached in 67% of 260 items related to imaging sequence parameters. T2-weighted, dynamic contrast-enhanced, and diffusion-weighted MRI were the key sequences incorporated into the minimum requirements. Consensus was also reached on 54% of 260 items related to image interpretation and reporting, including features of malignancy on individual sequences. A 5-point scale was agreed on for communicating the probability of malignancy, with a minimum of 16 prostatic regions of interest, to include a pictorial representation of suspicious foci. Limitations relate to consensus methodology. Dominant personalities are known to affect the opinions of the group and were countered by a neutral chairperson. Consensus was reached on a number of areas related to the conduct, interpretation, and reporting of mpMRI for the detection, localisation, and characterisation of prostate cancer. Before optimal dissemination of this technology, these outcomes will require formal validation in prospective trials. Copyright © 2010 European Association of Urology. Published by Elsevier B.V. All rights reserved.

[Molecular characterization of human influenza viruses--a look back on the last 10 years].

PubMed

Schweiger, Brunhilde

2006-01-01

Influenza A (H3N2) viruses and influenza B viruses have caused more than 90% of influenza infections in Germany during the last then years. Continuous and extensive antigenic variation was evident for both the hemagglutinin (HA) and neuraminidase (NA) surface proteins of H3N2 and influenza B viruses. Molecular characterisation revealed an ongoing genetic drift even in years when the antigenic profiles of circulating strains were indistinguishable from those of the previous season. Retrospective phylogenetic studies showed that viruses similar to vaccine strains circulated one or two years before a given strain was recommended as vaccine strain. New drift variants of H3N2 viruses with significantly changed antigenic features appeared during the seasons 1997/1998 and 2002/2003. Most influenza seasons were characterised by a co-circulation of at least two different lineages of H3N2 viruses. Genetic reassortment between H3N2 viruses belonging to separate lineages caused the different evolutionary pathways of the HA and viruses was responsible for the occurrence of H1N2 viruses during the season 2001/02. This new subtype has been detected only sporadically in Germany. The evolution of influenza B viruses was characterised by the re-emergence of B/Victoria/2/87-lineage viruses and their co-circulation with viruses of the B/Yamagata/16/88-lineage. Reassortant B viruses possessing a Victoria/87-lineage HA and a Yamagata/88-like NA were predominant in Germany during 2002/03 and 2004/05.

The influence of a ten-week Nordic walking training-rehabilitation program on the level of lipids in blood in overweight and obese postmenopausal women

PubMed Central

Hagner-Derengowska, Magdalena; Kałużny, Krystian; Hagner, Wojciech; Kochański, Bartosz; Plaskiewicz, Anna; Borkowska, Alina; Bronisz, Agata; Budzyński, Jacek

2015-01-01

[Purpose] The aim of this study was to evaluate the effect of a ten-week Nordic Walking (NW) rehabilitation program on chosen anthropometric parameters and the level of basic lipids in overweight and obese postmenopausal women’s blood. [Subjects and Methods] The subjects were 32 women aged 50–68 (average: 59.7 ± 5.9 years). The study was carried out following a non-randomized model and entailed NW rehabilitation 5 times a week, which lasted for 10 weeks, as well as a low-calorie 1,500 kcal diet. The therapeutic results of the study were measured through changes in anthropometric and biochemical parameters. The results were subjected to a statistical analysis. [Results] After 10 weeks of NW rehabilitation it was observed that participants lost weight and their body mass index dropped. Additionally, whereas levels of total cholesterol, LDL and triglycerides dropped, and the level of HDL increased. [Conclusion] Rehabilitation carried out according to the NW model resulted in statistically significant changes in basic lipids in blood which, considerably increased the percentage of persons who achieved the recommended level of blood lipids. Obese persons were characterised by a smaller rehabilitation weight loss. More intense workouts and cooperation with a dietician are required. PMID:26644639

Hybrid forum or network? The social and political construction of an international 'technical consultation': male circumcision and HIV prevention.

PubMed

Giami, Alain; Perrey, Christophe; Mendonça, André Luiz de Oliveira; de Camargo, Kenneth Rochel

2015-01-01

The technical consultation in Montreux, organised by World Health Organization and UNAIDS in 2007, recommended male circumcision as a method for preventing HIV transmission. This consultation came out of a long process of releasing reports and holding international and regional conferences, a process steered by an informal network. This network's relations with other parties is analysed along with its way of working and the exchanges during the technical consultation that led up to the formal adoption of a recommendation. Conducted in relation to the concepts of a 'hybrid forum' and 'network', this article shows that the decision was based on the formation and consolidation of a network of persons. They were active in all phases of this process, ranging from studies of the recommendation's efficacy, feasibility and acceptability to its adoption and implementation. In this sense, this consultation cannot be described as the constitution of a 'hybrid forum', which is characterised by its openness to a debate as well as a plurality of issues formulated by the actors and of resources used by them. On the contrary, little room was allowed for contradictory discussions, as if the decision had already been made before the Montreux consultation.

A comprehensive survey of thermoelectric homogeneity of commonly used thermocouple types

NASA Astrophysics Data System (ADS)

Machin, Jonathan; Tucker, Declan; Pearce, Jonathan V.

2018-06-01

Thermocouples are widely used as temperature sensors in industry. The electromotive force generated by a thermocouple is produced in a temperature gradient and not at the thermocouple tip. This means that the thermoelectric inhomogeneity represents one of the most important contributions to the overall measurement uncertainty associated with thermocouples. To characterise this effect, and to provide some general recommendations concerning the magnitude of this contribution to use when formulating uncertainty analyses, a comprehensive literature survey has been performed. Significant information was found for Types K, N, R, S, B, Pt/Pd, Au/Pt and various other Pt/Rh thermocouples. In the case of Type K and N thermocouples, the survey has been augmented by a substantial amount of data based on calibrations of mineral-insulated, metal-sheathed thermocouple cable reels from thermocouple manufacturers. Some general conclusions are drawn and outline recommendations given concerning typical values for the uncertainty arising from thermoelectric inhomogeneity for the most widely used thermocouple types in the as-new state. It is stressed that these recommendations should only be heeded when individual homogeneity measurements are not possible. It is also stressed that the homogeneity can deteriorate rapidly during use, particularly for base metal thermocouples.

Use of thermodynamic sorption models to derive radionuclide Kd values for performance assessment: Selected results and recommendations of the NEA sorption project

USGS Publications Warehouse

Ochs, M.; Davis, J.A.; Olin, M.; Payne, T.E.; Tweed, C.J.; Askarieh, M.M.; Altmann, S.

2006-01-01

For the safe final disposal and/or long-term storage of radioactive wastes, deep or near-surface underground repositories are being considered world-wide. A central safety feature is the prevention, or sufficient retardation, of radionuclide (RN) migration to the biosphere. To this end, radionuclide sorption is one of the most important processes. Decreasing the uncertainty in radionuclide sorption may contribute significantly to reducing the overall uncertainty of a performance assessment (PA). For PA, sorption is typically characterised by distribution coefficients (Kd values). The conditional nature of Kd requires different estimates of this parameter for each set of geochemical conditions of potential relevance in a RN's migration pathway. As it is not feasible to measure sorption for every set of conditions, the derivation of Kd for PA must rely on data derived from representative model systems. As a result, uncertainty in Kd is largely caused by the need to derive values for conditions not explicitly addressed in experiments. The recently concluded NEA Sorption Project [1] showed that thermodynamic sorption models (TSMs) are uniquely suited to derive K d as a function of conditions, because they allow a direct coupling of sorption with variable solution chemistry and mineralogy in a thermodynamic framework. The results of the project enable assessment of the suitability of various TSM approaches for PA-relevant applications as well as of the potential and limitations of TSMs to model RN sorption in complex systems. ?? by Oldenbourg Wissenschaftsverlag.

GP0.4 from bacteriophage T7: in silico characterisation of its structure and interaction with E. coli FtsZ.

PubMed

Simpkin, Adam J; Rigden, Daniel J

2016-07-13

Proteins produced by bacteriophages can have potent antimicrobial activity. The study of phage-host interactions can therefore inform small molecule drug discovery by revealing and characterising new drug targets. Here we characterise in silico the predicted interaction of gene protein 0.4 (GP0.4) from the Escherichia coli (E. coli) phage T7 with E. coli filamenting temperature-sensitive mutant Z division protein (FtsZ). FtsZ is a tubulin homolog which plays a key role in bacterial cell division and that has been proposed as a drug target. Using ab initio, fragment assembly structure modelling, we predicted the structure of GP0.4 with two programs. A structure similarity-based network was used to identify a U-shaped helix-turn-helix candidate fold as being favoured. ClusPro was used to dock this structure prediction to a homology model of E. coli FtsZ resulting in a favourable predicted interaction mode. Alternative docking methods supported the proposed mode which offered an immediate explanation for the anti-filamenting activity of GP0.4. Importantly, further strong support derived from a previously characterised insertion mutation, known to abolish GP0.4 activity, that is positioned in close proximity to the proposed GP0.4/FtsZ interface. The mode of interaction predicted by bioinformatics techniques strongly suggests a mechanism through which GP0.4 inhibits FtsZ and further establishes the latter's druggable intrafilament interface as a potential drug target.

Dietary patterns in toddlers with excess weight. The 2016 pitnuts study.

PubMed

Weker, Halina; Barańska, Marta; Riahi, Agnieszka; Strucińska, Małgorzata; Więch, Małgorzata; Rowicka, Grażyna; Dyląg, Hanna; Klemarczyk, Witold; Bzikowska, Agnieszka; Socha, Piotr

2017-01-01

Children's appropriate dietary pattern determines their optimal development, reduces the risk of childhood diseases and the risk of diet-dependent diseases, including obesity in adulthood. To analyze the dietary patterns of children with excess weight aged 1-3 years in comparison with the main components of the safe nutrition model including: the organization of meals (frequency of meals), selection of products (food intake), energy and nutritional value of children's diets. The study was carried out in 2016 on a representative nationwide sample of children aged 5-36 months (n=1059). The analysis of dietary patterns covered 173 with excess weight children aged 13-36 months (BMI-z-score >1 SD). Their nutritional status was evaluated based on BMI and its standardisation according to the WHO reference child growth standards for children aged 0-5 years (BMI z-score). The diets of children were assessed using 3-day dietary records. The dietary patterns of the children who were analysed were determined using the cluster analysis (k-means method), including 11 variables concerning average daily intake of main food group products (cow's milk, junior formula, milk products, bread, groats and rice, cereals, cured meats, fats, sugar and sweets, fruits, nectars and juices). Three clusters of overweight and obese children with different dietary patterns were identified. The diet of children from the first cluster (n=58) was based primarily on junior formula and foods for infants and toddlers. This dietary pattern was defined as the "baby food diet". The second cluster comprised 33 children whose diets were characterised by high consumption of cow's milk and dairy products, as well as cereal products, including bread, groats, rice and breakfast cereals. This dietary pattern was defined the "milk and cereals diet". The third cluster consisted of 82 children whose dietary pattern was characterised by high consumption of bread, cold meats and fats, sweets, juices and fruits (the "sandwich and sugar diet"). In all the clusters the average intake of vegetables and fruit by children with excess weight was significantly lower than the recommended amounts. The study showed too high intake of energy, protein, sodium, B vitamins and saccharose and an insufficient supply of calcium, fibre, vitamin D, vitamin E, LCPUFA, iodine and potassium in the children's diet in reference to nutritional recommendations. Younger children with the "baby food diet" pattern, due to the contribution of enriched food, had a more balanced diet in relation to the model of safe nutrition (nutritional norms). Older children's diets - in the third year of life, were characterized by a diversified choice of products that are a source of protein and carbohydrates (milk, breakfast cereals, meat, bread, cold meats, sugar from beverages, dairy desserts and juices). The identified dietary patterns of toddlers with excess weight differ from the safe nutrition model in terms of product selection and nutrient profile.

Modelling Behaviour of a Carbon Epoxy Composite Exposed to Fire: Part I-Characterisation of Thermophysical Properties.

PubMed

Tranchard, Pauline; Samyn, Fabienne; Duquesne, Sophie; Estèbe, Bruno; Bourbigot, Serge

2017-05-04

Thermophysical properties of a carbon-reinforced epoxy composite laminate (T700/M21 composite for aircraft structures) were evaluated using different innovative characterisation methods. Thermogravimetric Analysis (TGA), Simultaneous Thermal analysis (STA), Laser Flash analysis (LFA), and Fourier Transform Infrared (FTIR) analysis were used for measuring the thermal decomposition, the specific heat capacity, the anisotropic thermal conductivity of the composite, the heats of decomposition and the specific heat capacity of released gases. It permits to get input data to feed a three-dimensional (3D) model given the temperature profile and the mass loss obtained during well-defined fire scenarios (model presented in Part II of this paper). The measurements were optimised to get accurate data. The data also permit to create a public database on an aeronautical carbon fibre/epoxy composite for fire safety engineering.

Challenges and Opportunities in Analysing Students Modelling

ERIC Educational Resources Information Center

Blanco-Anaya, Paloma; Justi, Rosária; Díaz de Bustamante, Joaquín

2017-01-01

Modelling-based teaching activities have been designed and analysed from distinct theoretical perspectives. In this paper, we use one of them--the model of modelling diagram (MMD)--as an analytical tool in a regular classroom context. This paper examines the challenges that arise when the MMD is used as an analytical tool to characterise the…

Simplified models for displaced dark matter signatures

DOE Office of Scientific and Technical Information (OSTI.GOV)

Buchmueller, Oliver; De Roeck, Albert; Hahn, Kristian

We propose a systematic programme to search for long-lived neutral particle signatures through a minimal set of displaced =E T searches (dMETs). Here, our approach is to extend the well-established dark matter simpli ed models to include displaced vertices. The dark matter simplified models are used to describe the primary production vertex. A displaced secondary vertex, characterised by the mass of the long-lived particle and its lifetime, is added for the displaced signature. We show how these models can be motivated by, and mapped onto, complete models such as gauge-mediated SUSY breaking and models of neutral naturalness. We also outlinemore » how this approach may be used to extend other simplified models to incorporate displaced signatures and to characterise searches for longlived charged particles. Displaced vertices are a striking signature which is often virtually background free, and thus provide an excellent target for the high-luminosity run of the Large Hadron Collider. The proposed models and searches provide a first step towards a systematic broadening of the displaced dark matter search programme.« less

Simplified models for displaced dark matter signatures

DOE PAGES

Buchmueller, Oliver; De Roeck, Albert; Hahn, Kristian; ...

2017-09-18

We propose a systematic programme to search for long-lived neutral particle signatures through a minimal set of displaced =E T searches (dMETs). Here, our approach is to extend the well-established dark matter simpli ed models to include displaced vertices. The dark matter simplified models are used to describe the primary production vertex. A displaced secondary vertex, characterised by the mass of the long-lived particle and its lifetime, is added for the displaced signature. We show how these models can be motivated by, and mapped onto, complete models such as gauge-mediated SUSY breaking and models of neutral naturalness. We also outlinemore » how this approach may be used to extend other simplified models to incorporate displaced signatures and to characterise searches for longlived charged particles. Displaced vertices are a striking signature which is often virtually background free, and thus provide an excellent target for the high-luminosity run of the Large Hadron Collider. The proposed models and searches provide a first step towards a systematic broadening of the displaced dark matter search programme.« less

A Longitudinal Motor Characterisation of the HdhQ111 Mouse Model of Huntington's Disease.

PubMed

Yhnell, Emma; Dunnett, Stephen B; Brooks, Simon P

2016-05-31

Huntington's disease (HD) is a rare, incurable neurodegenerative disorder caused by a CAG trinucleotide expansion with the first exon of the huntingtin gene. Numerous knock-in mouse models are currently available for modelling HD. However, before their use in scientific research, these models must be characterised to determine their face and predictive validity as models of the disease and their reliability in recapitulating HD symptoms. Manifest HD is currently diagnosed upon the onset of motor symptoms, thus we sought to longitudinally characterise the progression and severity of motor signs in the HdhQ111 knock-in mouse model of HD, in heterozygous mice. An extensive battery of motor tests including: rotarod, inverted lid test, balance beam, spontaneous locomotor activity and gait analysis were applied longitudinally to a cohort of HdhQ111 heterozygous mice in order to progressively assess motor function. A progressive failure to gain body weight was demonstrated from 11 months of age and motor problems in all measures of balance beam performance were shown in HdhQ111 heterozygous animals in comparison to wild type control animals from 9 months of age. A decreased latency to fall from the rotarod was demonstrated in HdhQ111 heterozygous animals in comparison to wild type animals, although this was not progressive with time. No genotype specific differences were demonstrated in any of the other motor tests included in the test battery. The HdhQ111 heterozygous mouse demonstrates a subtle and progressive motor phenotype that begins at 9 months of age. This mouse model represents an early disease stage and would be ideal for testing therapeutic strategies that require elongated lead-in times, such as viral gene therapies or striatal transplantation.

Improved characterisation of measurement errors in electrical resistivity tomography (ERT) surveys

NASA Astrophysics Data System (ADS)

Tso, C. H. M.; Binley, A. M.; Kuras, O.; Graham, J.

2016-12-01

Measurement errors can play a pivotal role in geophysical inversion. Most inverse models require users to prescribe a statistical model of data errors before inversion. Wrongly prescribed error levels can lead to over- or under-fitting of data, yet commonly used models of measurement error are relatively simplistic. With the heightening interests in uncertainty estimation across hydrogeophysics, better characterisation and treatment of measurement errors is needed to provide more reliable estimates of uncertainty. We have analysed two time-lapse electrical resistivity tomography (ERT) datasets; one contains 96 sets of direct and reciprocal data collected from a surface ERT line within a 24h timeframe, while the other is a year-long cross-borehole survey at a UK nuclear site with over 50,000 daily measurements. Our study included the characterisation of the spatial and temporal behaviour of measurement errors using autocorrelation and covariance analysis. We find that, in addition to well-known proportionality effects, ERT measurements can also be sensitive to the combination of electrodes used. This agrees with reported speculation in previous literature that ERT errors could be somewhat correlated. Based on these findings, we develop a new error model that allows grouping based on electrode number in additional to fitting a linear model to transfer resistance. The new model fits the observed measurement errors better and shows superior inversion and uncertainty estimates in synthetic examples. It is robust, because it groups errors together based on the number of the four electrodes used to make each measurement. The new model can be readily applied to the diagonal data weighting matrix commonly used in classical inversion methods, as well as to the data covariance matrix in the Bayesian inversion framework. We demonstrate its application using extensive ERT monitoring datasets from the two aforementioned sites.

Apparent diffusion coefficient measurements in the differentiation between benign and malignant lesions: a systematic review.

PubMed

Vermoolen, M A; Kwee, T C; Nievelstein, R A J

2012-08-01

To systematically review the value of apparent diffusion coefficient (ADC) measurement in the differentiation between benign and malignant lesions. A systematic search of the Medline/Pubmed and Embase databases revealed 109 relevant studies. Quality of these articles was assessed using the Quality Assessment of the Studies of Diagnostic Accuracy Included in Systematic Reviews (QUADAS) criteria. Reported ADC values of benign and malignant lesions were compared per organ. The mean quality score of the reviewed articles was 50%. Comparison of ADC values showed marked variation among studies and between benign and malignant lesions in various organs. In several organs, such as breast, liver, and uterus, ADC values discriminated well between benign and malignant lesions. In other organs, such as the salivary glands, thyroid, and pancreas, ADCs were not significantly different between benign and malignant lesions. The potential utility of ADC measurement for the characterisation of tumours differs per organ. Future well-designed studies are required before ADC measurements can be recommended for the differentiation of benign and malignant lesions. These future studies should use standardised acquisition protocols and provide complete reporting of study methods, to facilitate comparison of results and clinical implementation of ADC measurement for tumour characterisation.

The dance of communication: retaining family membership despite severe non-speech dementia.

PubMed

Walmsley, Bruce D; McCormack, Lynne

2014-09-01

There is minimal research investigating non-speech communication as a result of living with severe dementia. This phenomenological study explores retained awareness expressed through non-speech patterns of communication in a family member living with severe dementia. Further, it describes reciprocal efforts used by all family members to engage in alternative patterns of communication. Family interactions were filmed to observe speech and non-speech relational communication. Participants were four family groups each with a family member living with non-speech communication as a result of severe dementia. Overall there were 16 participants. Data were analysed using thematic analysis. One superordinate theme, Dance of Communication, describes the interactive patterns that were observed during family communication. Two subordinate themes emerged: (a) in-step; characterised by communication that indicated harmony, spontaneity and reciprocity, and; (b) out-of-step; characterised by communication that indicated disharmony, syncopation, and vulnerability. This study highlights that retained awareness can exist at levels previously unrecognised in those living with limited or absent speech as a result of severe dementia. A recommendation for the development of a communication program for caregivers of individuals living with dementia is presented. © The Author(s) 2013 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.

Reference Cross Sections for Charged-particle Monitor Reactions

NASA Astrophysics Data System (ADS)

Hermanne, A.; Ignatyuk, A. V.; Capote, R.; Carlson, B. V.; Engle, J. W.; Kellett, M. A.; Kibédi, T.; Kim, G.; Kondev, F. G.; Hussain, M.; Lebeda, O.; Luca, A.; Nagai, Y.; Naik, H.; Nichols, A. L.; Nortier, F. M.; Suryanarayana, S. V.; Takács, S.; Tárkányi, F. T.; Verpelli, M.

2018-02-01

Evaluated cross sections of beam-monitor reactions are expected to become the de-facto standard for cross-section measurements that are performed over a very broad energy range in accelerators in order to produce particular radionuclides for industrial and medical applications. The requirements for such data need to be addressed in a timely manner, and therefore an IAEA coordinated research project was launched in December 2012 to establish or improve the nuclear data required to characterise charged-particle monitor reactions. An international team was assembled to recommend more accurate cross-section data over a wide range of targets and projectiles, undertaken in conjunction with a limited number of measurements and more extensive evaluations of the decay data of specific radionuclides. Least-square evaluations of monitor-reaction cross sections including uncertainty quantification have been undertaken for charged-particle beams of protons, deuterons, 3He- and 4He-particles. Recommended beam monitor reaction data with their uncertainties are available at the IAEA-NDS medical portal http://www-nds.iaea.org/medical/monitor_reactions.html.

Quantifying bioalbedo: a new physically based model and discussion of empirical methods for characterising biological influence on ice and snow albedo

NASA Astrophysics Data System (ADS)

Cook, Joseph M.; Hodson, Andrew J.; Gardner, Alex S.; Flanner, Mark; Tedstone, Andrew J.; Williamson, Christopher; Irvine-Fynn, Tristram D. L.; Nilsson, Johan; Bryant, Robert; Tranter, Martyn

2017-11-01

The darkening effects of biological impurities on ice and snow have been recognised as a control on the surface energy balance of terrestrial snow, sea ice, glaciers and ice sheets. With a heightened interest in understanding the impacts of a changing climate on snow and ice processes, quantifying the impact of biological impurities on ice and snow albedo (bioalbedo) and its evolution through time is a rapidly growing field of research. However, rigorous quantification of bioalbedo has remained elusive because of difficulties in isolating the biological contribution to ice albedo from that of inorganic impurities and the variable optical properties of the ice itself. For this reason, isolation of the biological signature in reflectance data obtained from aerial/orbital platforms has not been achieved, even when ground-based biological measurements have been available. This paper provides the cell-specific optical properties that are required to model the spectral signatures and broadband darkening of ice. Applying radiative transfer theory, these properties provide the physical basis needed to link biological and glaciological ground measurements with remotely sensed reflectance data. Using these new capabilities we confirm that biological impurities can influence ice albedo, then we identify 10 challenges to the measurement of bioalbedo in the field with the aim of improving future experimental designs to better quantify bioalbedo feedbacks. These challenges are (1) ambiguity in terminology, (2) characterising snow or ice optical properties, (3) characterising solar irradiance, (4) determining optical properties of cells, (5) measuring biomass, (6) characterising vertical distribution of cells, (7) characterising abiotic impurities, (8) surface anisotropy, (9) measuring indirect albedo feedbacks, and (10) measurement and instrument configurations. This paper aims to provide a broad audience of glaciologists and biologists with an overview of radiative transfer and albedo that could support future experimental design.

Systems for grading the quality of evidence and the strength of recommendations I: Critical appraisal of existing approaches The GRADE Working Group

PubMed Central

Atkins, David; Eccles, Martin; Flottorp, Signe; Guyatt, Gordon H; Henry, David; Hill, Suzanne; Liberati, Alessandro; O'Connell, Dianne; Oxman, Andrew D; Phillips, Bob; Schünemann, Holger; Edejer, Tessa Tan-Torres; Vist, Gunn E; Williams, John W

2004-01-01

Background A number of approaches have been used to grade levels of evidence and the strength of recommendations. The use of many different approaches detracts from one of the main reasons for having explicit approaches: to concisely characterise and communicate this information so that it can easily be understood and thereby help people make well-informed decisions. Our objective was to critically appraise six prominent systems for grading levels of evidence and the strength of recommendations as a basis for agreeing on characteristics of a common, sensible approach to grading levels of evidence and the strength of recommendations. Methods Six prominent systems for grading levels of evidence and strength of recommendations were selected and someone familiar with each system prepared a description of each of these. Twelve assessors independently evaluated each system based on twelve criteria to assess the sensibility of the different approaches. Systems used by 51 organisations were compared with these six approaches. Results There was poor agreement about the sensibility of the six systems. Only one of the systems was suitable for all four types of questions we considered (effectiveness, harm, diagnosis and prognosis). None of the systems was considered usable for all of the target groups we considered (professionals, patients and policy makers). The raters found low reproducibility of judgements made using all six systems. Systems used by 51 organisations that sponsor clinical practice guidelines included a number of minor variations of the six systems that we critically appraised. Conclusions All of the currently used approaches to grading levels of evidence and the strength of recommendations have important shortcomings. PMID:15615589

Systematic modelling and design evaluation of unperturbed tumour dynamics in xenografts.

PubMed

Parra Guillen, Zinnia P Patricia; Mangas Sanjuan, Victor; Garcia-Cremades, Maria; Troconiz, Inaki F; Mo, Gary; Pitou, Celine; Iversen, Philip W; Wallin, Johan E

2018-04-24

Xenograft mice are largely used to evaluate the efficacy of oncological drugs during preclinical phases of drug discovery and development. Mathematical models provide a useful tool to quantitatively characterise tumour growth dynamics and also optimise upcoming experiments. To the best of our knowledge, this is the first report where unperturbed growth of a large set of tumour cell lines (n=28) has been systematically analysed using the model proposed by Simeoni in the context of non-linear mixed effect (NLME). Exponential growth was identified as the governing mechanism in the majority of the cell lines, with constant rate values ranging from 0.0204 to 0.203 day -1 No common patterns could be observed across tumour types, highlighting the importance of combining information from different cell lines when evaluating drug activity. Overall, typical model parameters were precisely estimated using designs where tumour size measurements were taken every two days. Moreover, reducing the number of measurement to twice per week, or even once per week for cell lines with low growth rates, showed little impact on parameter precision. However, in order to accurately characterise parameter variability (i.e. relative standard errors below 50%), a sample size of at least 50 mice is needed. This work illustrates the feasibility to systematically apply NLME models to characterise tumour growth in drug discovery and development, and constitutes a valuable source of data to optimise experimental designs by providing an a priori sampling window and minimising the number of samples required. The American Society for Pharmacology and Experimental Therapeutics.

DecoFungi: a web application for automatic characterisation of dye decolorisation in fungal strains.

PubMed

Domínguez, César; Heras, Jónathan; Mata, Eloy; Pascual, Vico

2018-02-27

Fungi have diverse biotechnological applications in, among others, agriculture, bioenergy generation, or remediation of polluted soil and water. In this context, culture media based on color change in response to degradation of dyes are particularly relevant; but measuring dye decolorisation of fungal strains mainly relies on a visual and semiquantitative classification of color intensity changes. Such a classification is a subjective, time-consuming and difficult to reproduce process. DecoFungi is the first, at least up to the best of our knowledge, application to automatically characterise dye decolorisation level of fungal strains from images of inoculated plates. In order to deal with this task, DecoFungi employs a deep-learning model, accessible through a user-friendly web interface, with an accuracy of 96.5%. DecoFungi is an easy to use system for characterising dye decolorisation level of fungal strains from images of inoculated plates.

Feature-based characterisation of signature topography in laser powder bed fusion of metals

NASA Astrophysics Data System (ADS)

Senin, Nicola; Thompson, Adam; Leach, Richard

2018-04-01

The use of state-of-the-art areal topography measurement instrumentation allows for a high level of detail in the acquisition of topographic information at micrometric scales. The 3D geometric models of surface topography obtained from measured data create new opportunities for the investigation of manufacturing processes through characterisation of the surfaces of manufactured parts. Conventional methods for quantitative assessment of topography usually only involve the computation of texture parameters, summary indicators of topography-related characteristics that are computed over the investigated area. However, further useful information may be obtained through characterisation of signature topographic formations, as more direct indicators of manufacturing process behaviour and performance. In this work, laser powder bed fusion of metals is considered. An original algorithmic method is proposed to isolate relevant topographic formations and to quantify their dimensional and geometric properties, using areal topography data acquired by state-of-the-art areal topography measurement instrumentation.

Modelling Behaviour of a Carbon Epoxy Composite Exposed to Fire: Part I—Characterisation of Thermophysical Properties

PubMed Central

Tranchard, Pauline; Samyn, Fabienne; Duquesne, Sophie; Estèbe, Bruno; Bourbigot, Serge

2017-01-01

Thermophysical properties of a carbon-reinforced epoxy composite laminate (T700/M21 composite for aircraft structures) were evaluated using different innovative characterisation methods. Thermogravimetric Analysis (TGA), Simultaneous Thermal analysis (STA), Laser Flash analysis (LFA), and Fourier Transform Infrared (FTIR) analysis were used for measuring the thermal decomposition, the specific heat capacity, the anisotropic thermal conductivity of the composite, the heats of decomposition and the specific heat capacity of released gases. It permits to get input data to feed a three-dimensional (3D) model given the temperature profile and the mass loss obtained during well-defined fire scenarios (model presented in Part II of this paper). The measurements were optimised to get accurate data. The data also permit to create a public database on an aeronautical carbon fibre/epoxy composite for fire safety engineering. PMID:28772854

Influence of the level of description of the indoor environment on the characteristic parameters of a MIMO channel

NASA Astrophysics Data System (ADS)

Pereira, Carlos; Chartois, Yannick; Pousset, Yannis; Vauzelle, Rodolphe

2006-09-01

Modelling of the environment is an important factor in electromagnetic wave propagation simulation, performed by a 3D ray-tracing method. The aim of this work is to study the effect of indoor environment modelling accuracy on MIMO (Multiple Input Multiple Output) channel characterisation. The first of the two environments investigated is the hall of our building, while the second one is a more confined environment and represents the floor of our laboratory. For these two indoor environments, three description levels are proposed in order to establish geometrical and electrical modelling impact on MIMO channel characterisation. Results are obtained by analysing the capacity and variation in correlation in relation to the polarisation, the presence of LOS (Line of sight) or NLOS configurations, the spacing between antennae and the number of transmitter and receiver antennae. To cite this article: C. Pereira et al., C. R. Physique 7 (2006).

Geostatistical characterisation of geothermal parameters for a thermal aquifer storage site in Germany

NASA Astrophysics Data System (ADS)

Rodrigo-Ilarri, J.; Li, T.; Grathwohl, P.; Blum, P.; Bayer, P.

2009-04-01

The design of geothermal systems such as aquifer thermal energy storage systems (ATES) must account for a comprehensive characterisation of all relevant parameters considered for the numerical design model. Hydraulic and thermal conductivities are the most relevant parameters and its distribution determines not only the technical design but also the economic viability of such systems. Hence, the knowledge of the spatial distribution of these parameters is essential for a successful design and operation of such systems. This work shows the first results obtained when applying geostatistical techniques to the characterisation of the Esseling Site in Germany. In this site a long-term thermal tracer test (> 1 year) was performed. On this open system the spatial temperature distribution inside the aquifer was observed over time in order to obtain as much information as possible that yield to a detailed characterisation both of the hydraulic and thermal relevant parameters. This poster shows the preliminary results obtained for the Esseling Site. It has been observed that the common homogeneous approach is not sufficient to explain the observations obtained from the TRT and that parameter heterogeneity must be taken into account.

Inverse liquid chromatography as a tool for characterisation of the surface layer of ceramic biomaterials.

PubMed

Kadlec, Karol; Adamska, Katarzyna; Okulus, Zuzanna; Voelkel, Adam

2016-10-14

The novel technique for ceramic biomaterials surface characterisation was proposed. The examined bone substitute materials were two orthophosphates: hydroxyapatite, β-tricalcium phosphate and the mixture of these two - biphasic calcium phosphate. The aim of this work was characterisation of the ceramic biomaterials surface expressed via the values of parameters e, s, a, b, v considered in linear free energy relationship. The values of these parameters reflect the ability of stationary phase to occur in different types of interactions. The sorption phenomena occurring on the bone substitute materials surface are responsible for the process of the multiplication of the osteoblasts. Thus the detailed description of this phenomena may contribute to the better understanding of bone loss regeneration mechanism. The data required for characterisation by using LFER model was collected by means of inverse liquid chromatography with the use of five different mobile phases: 98% ethanol, ethanol/water (50/50), water, 0.2M NaCl and SBF. The determination of the ceramic orthophosphates surface properties in SBF solution allowed to observe the behaviour of biomaterials in "natural environment" - in living organism. Copyright © 2016 Elsevier B.V. All rights reserved.

Characterising dark matter searches at colliders and direct detection experiments: Vector mediators

DOE PAGES

Buchmueller, Oliver; Dolan, Matthew J.; Malik, Sarah A.; ...

2015-01-09

We introduce a Minimal Simplified Dark Matter (MSDM) framework to quantitatively characterise dark matter (DM) searches at the LHC. We study two MSDM models where the DM is a Dirac fermion which interacts with a vector and axial-vector mediator. The models are characterised by four parameters: m DM, M med , g DM and g q, the DM and mediator masses, and the mediator couplings to DM and quarks respectively. The MSDM models accurately capture the full event kinematics, and the dependence on all masses and couplings can be systematically studied. The interpretation of mono-jet searches in this framework canmore » be used to establish an equal-footing comparison with direct detection experiments. For theories with a vector mediator, LHC mono-jet searches possess better sensitivity than direct detection searches for light DM masses (≲5 GeV). For axial-vector mediators, LHC and direct detection searches generally probe orthogonal directions in the parameter space. We explore the projected limits of these searches from the ultimate reach of the LHC and multi-ton xenon direct detection experiments, and find that the complementarity of the searches remains. In conclusion, we provide a comparison of limits in the MSDM and effective field theory (EFT) frameworks to highlight the deficiencies of the EFT framework, particularly when exploring the complementarity of mono-jet and direct detection searches.« less

Exact ground-state correlation functions of an atomic-molecular Bose–Einstein condensate model

NASA Astrophysics Data System (ADS)

Links, Jon; Shen, Yibing

2018-05-01

We study the ground-state properties of an atomic-molecular Bose–Einstein condensate model through an exact Bethe Ansatz solution. For a certain range of parameter choices, we prove that the ground-state Bethe roots lie on the positive real-axis. We then use a continuum limit approach to obtain a singular integral equation characterising the distribution of these Bethe roots. Solving this equation leads to an analytic expression for the ground-state energy. The form of the expression is consistent with the existence of a line of quantum phase transitions, which has been identified in earlier studies. This line demarcates a molecular phase from a mixed phase. Certain correlation functions, which characterise these phases, are then obtained through the Hellmann–Feynman theorem.

Quantification of micro-CT images of textile reinforcements

NASA Astrophysics Data System (ADS)

Straumit, Ilya; Lomov, Stepan V.; Wevers, Martine

2017-10-01

VoxTex software (KU Leuven) employs 3D image processing, which use the local directionality information, retrieved using analysis of local structure tensor. The processing results in a voxel 3D array, with each voxel carrying information on (1) material type (matrix; yarn/ply, with identification of the yarn/ply in the reinforcement architecture; void) and (2) fibre direction for fibrous yarns/plies. The knowledge of the material phase volume and known characterisation of the textile structure allows assigning to the voxels (3) fibre volume fraction. This basic voxel model can be further used for different type of the material analysis: Internal geometry and characterisation of defects; permeability; micromechanics; mesoFE voxel models. Apart from the voxel based analysis, approaches to reconstruction of the yarn paths are presented.

Engineering geology model of the Crater Lake outlet, Mt. Ruapehu, New Zealand, to inform rim breakout hazard

NASA Astrophysics Data System (ADS)

Cook, Stefan C. W.; Kennedy, Ben M.; Villeneuve, Marlène C.

2018-01-01

Mt. Ruapehu, in the central North Island of New Zealand, hosts a hot acidic Crater Lake over the active volcanic vent with a surface elevation of c. 2530 m.a.s.l. Volcanic activity and other montane processes have previously resulted in catastrophic releases of some or all of the c. 10 Mm3 of water retained in the lake, creating serious hazards downstream. A major lahar in March 2007 exposed a 10 m high face representative of the rock units impounding the lake, providing an opportunity to conduct both field and laboratory analysis to characterise the rock mass conditions at the outlet to assess the stability of the outlet area. This paper presents an engineering geology model of Crater Lake outlet. Our model shows three andesitic geological units at the outlet, each with different geological histories and physical and mechanical properties, which impact its stability. Geotechnical methods used to characterise the outlet include laboratory testing of the strength, stiffness, porosity and unit weight, and field-based rock mass characterisation using the geological strength index (GSI) and rock mass rating (RMR). Field observations, geomorphology mapping, historic and contemporary photographs, and laboratory results are combined to create cross sections that provide key information for establishing the engineering geology model. The units are recognised in what is informally termed the Crater Lake Formation: i) The upper surface layer is a c. 2 m thick sub-horizontal dark grey lava unit (Armoured Lava Ledge) with sub-horizontal cooling joints spaced at 0.2 m to 2.0 m intervals. The intact rock has a porosity range of 15-27%, density range of 1723-2101 kg/m3, GSI range of 45-75, and unconfined compressive strength (UCS) range of 19-48 MPa. ii) Below this, and outcropping down the majority of the outlet waterfall is a poorly sorted breccia unit composed of block and matrix material (Lava Breccia). The blocks range from 0.1 m to 0.8 m in diameter with an average porosity of 21%, a density of 1956 kg/m3 and strength of 85 MPa. The matrix has soil-like properties with an estimated UCS of 1.5 MPa. iii) At the base of the waterfall, the material sharply transitions into a light grey, slightly weathered unit (Lower Grey Member). This lower unit has an irregular surface expression with sub-vertical discontinuities. Porosity is 6%, density is 2569 kg/m3, the GSI range is 65-75, and the UCS is 98 MPa. The engineering geology model portrays the relationships between the units in three dimensions, highlights key structures and takes into consideration the material source, transportation and depositional processes. Historical outlet photographs suggest past eruptive and glacial activities are both significant factors controlling the deposition and erosion of material at the outlet. The Lower Grey Member appears to be a sound material for the outlet and water fall to be founded on. The upper aa Armoured Lava Ledge currently has moderate strength and GSI, and is resistive, providing protection for the underlying weaker block and matrix unit, however, continued incision by the outlet stream will eventually expose the weaker block and matrix material of the Lava Breccia. Once exposed, the Lava Breccia could rapidly erode or fail down to the Lower Grey Member and could potentially release 1 Mm3 of hot, acidic Crater Lake water. We recommend that erosion rates for the upper Armoured Lava Ledge be established to aid in preparation for eventual rim breakout.

A Flexible Electronic Commerce Recommendation System

NASA Astrophysics Data System (ADS)

Gong, Songjie

Recommendation systems have become very popular in E-commerce websites. Many of the largest commerce websites are already using recommender technologies to help their customers find products to purchase. An electronic commerce recommendation system learns from a customer and recommends products that the customer will find most valuable from among the available products. But most recommendation methods are hard-wired into the system and they support only fixed recommendations. This paper presented a framework of flexible electronic commerce recommendation system. The framework is composed by user model interface, recommendation engine, recommendation strategy model, recommendation technology group, user interest model and database interface. In the recommender strategy model, the method can be collaborative filtering, content-based filtering, mining associate rules method, knowledge-based filtering method or the mixed method. The system mapped the implementation and demand through strategy model, and the whole system would be design as standard parts to adapt to the change of the recommendation strategy.

Identifying, Characterising and Assessing New Practices in Doctoral Education

ERIC Educational Resources Information Center

Baschung, Lukas

2016-01-01

Traditionally, European doctoral education has principally taken place within the binary relationship of professors and their doctoral students according to the "apprenticeship model." However, in the last one to two decades, this model has been questioned. Governments and higher education institutions (HEIs) reform doctoral education by…

Networked dynamical systems with linear coupling: synchronisation patterns, coherence and other behaviours.

PubMed

Judd, Kevin

2013-12-01

Many physical and biochemical systems are well modelled as a network of identical non-linear dynamical elements with linear coupling between them. An important question is how network structure affects chaotic dynamics, for example, by patterns of synchronisation and coherence. It is shown that small networks can be characterised precisely into patterns of exact synchronisation and large networks characterised by partial synchronisation at the local and global scale. Exact synchronisation modes are explained using tools of symmetry groups and invariance, and partial synchronisation is explained by finite-time shadowing of exact synchronisation modes.

Management of latent Mycobacterium tuberculosis infection: WHO guidelines for low tuberculosis burden countries.

PubMed

Getahun, Haileyesus; Matteelli, Alberto; Abubakar, Ibrahim; Aziz, Mohamed Abdel; Baddeley, Annabel; Barreira, Draurio; Den Boon, Saskia; Borroto Gutierrez, Susana Marta; Bruchfeld, Judith; Burhan, Erlina; Cavalcante, Solange; Cedillos, Rolando; Chaisson, Richard; Chee, Cynthia Bin-Eng; Chesire, Lucy; Corbett, Elizabeth; Dara, Masoud; Denholm, Justin; de Vries, Gerard; Falzon, Dennis; Ford, Nathan; Gale-Rowe, Margaret; Gilpin, Chris; Girardi, Enrico; Go, Un-Yeong; Govindasamy, Darshini; D Grant, Alison; Grzemska, Malgorzata; Harris, Ross; Horsburgh, C Robert; Ismayilov, Asker; Jaramillo, Ernesto; Kik, Sandra; Kranzer, Katharina; Lienhardt, Christian; LoBue, Philip; Lönnroth, Knut; Marks, Guy; Menzies, Dick; Migliori, Giovanni Battista; Mosca, Davide; Mukadi, Ya Diul; Mwinga, Alwyn; Nelson, Lisa; Nishikiori, Nobuyuki; Oordt-Speets, Anouk; Rangaka, Molebogeng Xheedha; Reis, Andreas; Rotz, Lisa; Sandgren, Andreas; Sañé Schepisi, Monica; Schünemann, Holger J; Sharma, Surender Kumar; Sotgiu, Giovanni; Stagg, Helen R; Sterling, Timothy R; Tayeb, Tamara; Uplekar, Mukund; van der Werf, Marieke J; Vandevelde, Wim; van Kessel, Femke; van't Hoog, Anna; Varma, Jay K; Vezhnina, Natalia; Voniatis, Constantia; Vonk Noordegraaf-Schouten, Marije; Weil, Diana; Weyer, Karin; Wilkinson, Robert John; Yoshiyama, Takashi; Zellweger, Jean Pierre; Raviglione, Mario

2015-12-01

Latent tuberculosis infection (LTBI) is characterised by the presence of immune responses to previously acquired Mycobacterium tuberculosis infection without clinical evidence of active tuberculosis (TB). Here we report evidence-based guidelines from the World Health Organization for a public health approach to the management of LTBI in high risk individuals in countries with high or middle upper income and TB incidence of <100 per 100 000 per year. The guidelines strongly recommend systematic testing and treatment of LTBI in people living with HIV, adult and child contacts of pulmonary TB cases, patients initiating anti-tumour necrosis factor treatment, patients receiving dialysis, patients preparing for organ or haematological transplantation, and patients with silicosis. In prisoners, healthcare workers, immigrants from high TB burden countries, homeless persons and illicit drug users, systematic testing and treatment of LTBI is conditionally recommended, according to TB epidemiology and resource availability. Either commercial interferon-gamma release assays or Mantoux tuberculin skin testing could be used to test for LTBI. Chest radiography should be performed before LTBI treatment to rule out active TB disease. Recommended treatment regimens for LTBI include: 6 or 9 month isoniazid; 12 week rifapentine plus isoniazid; 3-4 month isoniazid plus rifampicin; or 3-4 month rifampicin alone. Copyright ©ERS 2015.

Management of latent Mycobacterium tuberculosis infection: WHO guidelines for low tuberculosis burden countries

PubMed Central

Matteelli, Alberto; Abubakar, Ibrahim; Aziz, Mohamed Abdel; Baddeley, Annabel; Barreira, Draurio; Den Boon, Saskia; Borroto Gutierrez, Susana Marta; Bruchfeld, Judith; Burhan, Erlina; Cavalcante, Solange; Cedillos, Rolando; Chaisson, Richard; Chee, Cynthia Bin-Eng; Chesire, Lucy; Corbett, Elizabeth; Dara, Masoud; Denholm, Justin; de Vries, Gerard; Falzon, Dennis; Ford, Nathan; Gale-Rowe, Margaret; Gilpin, Chris; Girardi, Enrico; Go, Un-Yeong; Govindasamy, Darshini; D. Grant, Alison; Grzemska, Malgorzata; Harris, Ross; Horsburgh Jr, C. Robert; Ismayilov, Asker; Jaramillo, Ernesto; Kik, Sandra; Kranzer, Katharina; Lienhardt, Christian; LoBue, Philip; Lönnroth, Knut; Marks, Guy; Menzies, Dick; Migliori, Giovanni Battista; Mosca, Davide; Mukadi, Ya Diul; Mwinga, Alwyn; Nelson, Lisa; Nishikiori, Nobuyuki; Oordt-Speets, Anouk; Rangaka, Molebogeng Xheedha; Reis, Andreas; Rotz, Lisa; Sandgren, Andreas; Sañé Schepisi, Monica; Schünemann, Holger J.; Sharma, Surender Kumar; Sotgiu, Giovanni; Stagg, Helen R.; Sterling, Timothy R.; Tayeb, Tamara; Uplekar, Mukund; van der Werf, Marieke J.; Vandevelde, Wim; van Kessel, Femke; van't Hoog, Anna; Varma, Jay K.; Vezhnina, Natalia; Voniatis, Constantia; Vonk Noordegraaf-Schouten, Marije; Weil, Diana; Weyer, Karin; Wilkinson, Robert John; Yoshiyama, Takashi; Zellweger, Jean Pierre; Raviglione, Mario

2015-01-01

Latent tuberculosis infection (LTBI) is characterised by the presence of immune responses to previously acquired Mycobacterium tuberculosis infection without clinical evidence of active tuberculosis (TB). Here we report evidence-based guidelines from the World Health Organization for a public health approach to the management of LTBI in high risk individuals in countries with high or middle upper income and TB incidence of <100 per 100 000 per year. The guidelines strongly recommend systematic testing and treatment of LTBI in people living with HIV, adult and child contacts of pulmonary TB cases, patients initiating anti-tumour necrosis factor treatment, patients receiving dialysis, patients preparing for organ or haematological transplantation, and patients with silicosis. In prisoners, healthcare workers, immigrants from high TB burden countries, homeless persons and illicit drug users, systematic testing and treatment of LTBI is conditionally recommended, according to TB epidemiology and resource availability. Either commercial interferon-gamma release assays or Mantoux tuberculin skin testing could be used to test for LTBI. Chest radiography should be performed before LTBI treatment to rule out active TB disease. Recommended treatment regimens for LTBI include: 6 or 9 month isoniazid; 12 week rifapentine plus isoniazid; 3–4 month isoniazid plus rifampicin; or 3–4 month rifampicin alone. PMID:26405286

Improved characterisation and modelling of measurement errors in electrical resistivity tomography (ERT) surveys

NASA Astrophysics Data System (ADS)

Tso, Chak-Hau Michael; Kuras, Oliver; Wilkinson, Paul B.; Uhlemann, Sebastian; Chambers, Jonathan E.; Meldrum, Philip I.; Graham, James; Sherlock, Emma F.; Binley, Andrew

2017-11-01

Measurement errors can play a pivotal role in geophysical inversion. Most inverse models require users to prescribe or assume a statistical model of data errors before inversion. Wrongly prescribed errors can lead to over- or under-fitting of data; however, the derivation of models of data errors is often neglected. With the heightening interest in uncertainty estimation within hydrogeophysics, better characterisation and treatment of measurement errors is needed to provide improved image appraisal. Here we focus on the role of measurement errors in electrical resistivity tomography (ERT). We have analysed two time-lapse ERT datasets: one contains 96 sets of direct and reciprocal data collected from a surface ERT line within a 24 h timeframe; the other is a two-year-long cross-borehole survey at a UK nuclear site with 246 sets of over 50,000 measurements. Our study includes the characterisation of the spatial and temporal behaviour of measurement errors using autocorrelation and correlation coefficient analysis. We find that, in addition to well-known proportionality effects, ERT measurements can also be sensitive to the combination of electrodes used, i.e. errors may not be uncorrelated as often assumed. Based on these findings, we develop a new error model that allows grouping based on electrode number in addition to fitting a linear model to transfer resistance. The new model explains the observed measurement errors better and shows superior inversion results and uncertainty estimates in synthetic examples. It is robust, because it groups errors together based on the electrodes used to make the measurements. The new model can be readily applied to the diagonal data weighting matrix widely used in common inversion methods, as well as to the data covariance matrix in a Bayesian inversion framework. We demonstrate its application using extensive ERT monitoring datasets from the two aforementioned sites.

Chandra ACIS-I particle background: an analytical model

NASA Astrophysics Data System (ADS)

Bartalucci, I.; Mazzotta, P.; Bourdin, H.; Vikhlinin, A.

2014-06-01

Aims: Imaging and spectroscopy of X-ray extended sources require a proper characterisation of a spatially unresolved background signal. This background includes sky and instrumental components, each of which are characterised by its proper spatial and spectral behaviour. While the X-ray sky background has been extensively studied in previous work, here we analyse and model the instrumental background of the ACIS-I detector on board the Chandra X-ray observatory in very faint mode. Methods: Caused by interaction of highly energetic particles with the detector, the ACIS-I instrumental background is spectrally characterised by the superimposition of several fluorescence emission lines onto a continuum. To isolate its flux from any sky component, we fitted an analytical model of the continuum to observations performed in very faint mode with the detector in the stowed position shielded from the sky, and gathered over the eight-year period starting in 2001. The remaining emission lines were fitted to blank-sky observations of the same period. We found 11 emission lines. Analysing the spatial variation of the amplitude, energy and width of these lines has further allowed us to infer that three lines of these are presumably due to an energy correction artefact produced in the frame store. Results: We provide an analytical model that predicts the instrumental background with a precision of 2% in the continuum and 5% in the lines. We use this model to measure the flux of the unresolved cosmic X-ray background in the Chandra deep field south. We obtain a flux of 10.2+0.5-0.4 × 10-13 erg cm-2 deg-2 s-1 for the [1-2] keV band and (3.8 ± 0.2) × 10-12 erg cm-2 deg-2 s-1 for the [2-8] keV band.

Integrated methodology for assessing the HCH groundwater pollution at the multi-source contaminated mega-site Bitterfeld/Wolfen.

PubMed

Wycisk, Peter; Stollberg, Reiner; Neumann, Christian; Gossel, Wolfgang; Weiss, Holger; Weber, Roland

2013-04-01

A large-scale groundwater contamination characterises the Pleistocene groundwater system of the former industrial and abandoned mining region Bitterfeld/Wolfen, Eastern Germany. For more than a century, local chemical production and extensive lignite mining caused a complex contaminant release from local production areas and related dump sites. Today, organic pollutants (mainly organochlorines) are present in all compartments of the environment at high concentration levels. An integrated methodology for characterising the current situation of pollution as well as the future fate development of hazardous substances is highly required to decide on further management and remediation strategies. Data analyses have been performed on regional groundwater monitoring data from about 10 years, containing approximately 3,500 samples, and up to 180 individual organic parameters from almost 250 observation wells. Run-off measurements as well as water samples were taken biweekly from local creeks during a period of 18 months. A kriging interpolation procedure was applied on groundwater analytics to generate continuous distribution patterns of the nodal contaminant samples. High-resolution geological 3-D modelling serves as a database for a regional 3-D groundwater flow model. Simulation results support the future fate assessment of contaminants. A first conceptual model of the contamination has been developed to characterise the contamination in regional surface waters and groundwater. A reliable explanation of the variant hexachlorocyclohexane (HCH) occurrence within the two local aquifer systems has been derived from the regionalised distribution patterns. Simulation results from groundwater flow modelling provide a better understanding of the future pollutant migration paths and support the overall site characterisation. The presented case study indicates that an integrated assessment of large-scale groundwater contaminations often needs more data than only from local groundwater monitoring. The developed methodology is appropriate to assess POP-contaminated mega-sites including, e.g. HCH deposits. Although HCH isomers are relevant groundwater pollutants at this site, further organochlorine pollutants are present at considerably higher levels. The study demonstrates that an effective evaluation of the current situation of contamination as well as of the related future fate development requires detailed information of the entire observed system.

Incorporating the Impacts of Small Scale Rock Heterogeneity into Models of Flow and Trapping in Target UK CO2 Storage Systems

NASA Astrophysics Data System (ADS)

Jackson, S. J.; Reynolds, C.; Krevor, S. C.

2017-12-01

Predictions of the flow behaviour and storage capacity of CO2 in subsurface reservoirs are dependent on accurate modelling of multiphase flow and trapping. A number of studies have shown that small scale rock heterogeneities have a significant impact on CO2flow propagating to larger scales. The need to simulate flow in heterogeneous reservoir systems has led to the development of numerical upscaling techniques which are widely used in industry. Less well understood, however, is the best approach for incorporating laboratory characterisations of small scale heterogeneities into models. At small scales, heterogeneity in the capillary pressure characteristic function becomes significant. We present a digital rock workflow that combines core flood experiments with numerical simulations to characterise sub-core scale capillary pressure heterogeneities within rock cores from several target UK storage reservoirs - the Bunter, Captain and Ormskirk sandstone formations. Measured intrinsic properties (permeability, capillary pressure, relative permeability) and 3D saturations maps from steady-state core flood experiments were the primary inputs to construct a 3D digital rock model in CMG IMEX. We used vertical end-point scaling to iteratively update the voxel by voxel capillary pressure curves from the average MICP curve; with each iteration more closely predicting the experimental saturations and pressure drops. Once characterised, the digital rock cores were used to predict equivalent flow functions, such as relative permeability and residual trapping, across the range of flow conditions estimated to prevail in the CO2 storage reservoirs. In the case of the Captain sandstone, rock cores were characterised across an entire 100m vertical transect of the reservoir. This allowed analysis of the upscaled impact of small scale heterogeneity on flow and trapping. Figure 1 shows the varying degree to which heterogeneity impacted flow depending on the capillary number in the Captain sandstone. At low capillary numbers, typical of regions where flow is dominated by buoyancy, fluid flow is impeded and trapping enhanced. At high capillary numbers, typical of the near wellbore environment, the fluid distributed homogeneously and the equivalent relative permeability was higher leading to improved injectivity.

Discriminating the Mediterranean Pinus spp. using the land surface phenology extracted from the whole MODIS NDVI time series and machine learning algorithms

NASA Astrophysics Data System (ADS)

Rodriguez-Galiano, Victor; Aragones, David; Caparros-Santiago, Jose A.; Navarro-Cerrillo, Rafael M.

2017-10-01

Land surface phenology (LSP) can improve the characterisation of forest areas and their change processes. The aim of this work was: i) to characterise the temporal dynamics in Mediterranean Pinus forests, and ii) to evaluate the potential of LSP for species discrimination. The different experiments were based on 679 mono-specific plots for the 5 native species on the Iberian Peninsula: P. sylvestris, P. pinea, P. halepensis, P. nigra and P. pinaster. The entire MODIS NDVI time series (2000-2016) of the MOD13Q1 product was used to characterise phenology. The following phenological parameters were extracted: the start, end and median days of the season, and the length of the season in days, as well as the base value, maximum value, amplitude and integrated value. Multi-temporal metrics were calculated to synthesise the inter-annual variability of the phenological parameters. The species were discriminated by the application of Random Forest (RF) classifiers from different subsets of variables: model 1) NDVI-smoothed time series, model 2) multi-temporal metrics of the phenological parameters, and model 3) multi-temporal metrics and the auxiliary physical variables (altitude, slope, aspect and distance to the coastline). Model 3 was the best, with an overall accuracy of 82%, a kappa coefficient of 0.77 and whose most important variables were: elevation, coast distance, and the end and start days of the growing season. The species that presented the largest errors was P. nigra, (kappa= 0.45), having locations with a similar behaviour to P. sylvestris or P. pinaster.

Rigorous Characterisation of a Novel, Statistically-Based Ocean Colour Algorithm for the PACE Mission

NASA Astrophysics Data System (ADS)

Craig, S. E.; Lee, Z.; Du, K.; Lin, J.

2016-02-01

An approach based on empirical orthogonal function (EOF) analysis of ocean colour spectra has been shown to accurately derive inherent optical properties (IOPs) and chlorophyll concentration in scenarios, such as optically complex waters, where standard algorithms often perform poorly. The algorithm has been successfully used in a number of regional applications, and has also shown promise in a global implementation based on the NASA NOMAD data set. Additionally, it has demonstrated the unique ability to derive ocean colour products from top of atmosphere (TOA) signals with either no or minimal atmospheric correction applied. Due to its high potential for use over coastal and inland waters, the EOF approach is currently being rigorously characterised as part of a suite of approaches that will be used to support the new NASA ocean colour mission, PACE (Pre-Aerosol, Clouds and ocean Ecosystem). A major component in this model characterisation is the generation of a synthetic TOA data set using a coupled ocean-atmosphere radiative transfer model, which has been run to mimic PACE spectral resolution, and under a wide range of geographical locations, water constituent concentrations, and sea surface and atmospheric conditions. The resulting multidimensional data set will be analysed, and results presented on the sensitivity of the model to various combinations of parameters, and preliminary conclusions made regarding the optimal implementation strategy of this promising approach (e.g. on a global, optical water type or regional basis). This will provide vital guidance for operational implementation of the model for both existing satellite ocean colour sensors and the upcoming PACE mission.

GIS model for identifying urban areas vulnerable to noise pollution: case study

NASA Astrophysics Data System (ADS)

Bilaşco, Ştefan; Govor, Corina; Roşca, Sanda; Vescan, Iuliu; Filip, Sorin; Fodorean, Ioan

2017-04-01

The unprecedented expansion of the national car ownership over the last few years has been determined by economic growth and the need for the population and economic agents to reduce travel time in progressively expanding large urban centres. This has led to an increase in the level of road noise and a stronger impact on the quality of the environment. Noise pollution generated by means of transport represents one of the most important types of pollution with negative effects on a population's health in large urban areas. As a consequence, tolerable limits of sound intensity for the comfort of inhabitants have been determined worldwide and the generation of sound maps has been made compulsory in order to identify the vulnerable zones and to make recommendations how to decrease the negative impact on humans. In this context, the present study aims at presenting a GIS spatial analysis model-based methodology for identifying and mapping zones vulnerable to noise pollution. The developed GIS model is based on the analysis of all the components influencing sound propagation, represented as vector databases (points of sound intensity measurements, buildings, lands use, transport infrastructure), raster databases (DEM), and numerical databases (wind direction and speed, sound intensity). Secondly, the hourly changes (for representative hours) were analysed to identify the hotspots characterised by major traffic flows specific to rush hours. The validated results of the model are represented by GIS databases and useful maps for the local public administration to use as a source of information and in the process of making decisions.

Modelling, analysis and validation of microwave techniques for the characterisation of metallic nanoparticles

NASA Astrophysics Data System (ADS)

Sulaimalebbe, Aslam

In the last decade, the study of nanoparticle (NP) systems has become a large and interesting research area due to their novel properties and functionalities, which are different from those of the bulk materials, and also their potential applications in different fields. It is vital to understand the behaviour and properties of nano-materials aiming at implementing nanotechnology, controlling their behaviour and designing new material systems with superior performance. Physical characterisation of NPs falls into two main categories, property and structure analysis, where the properties of the NPs cannot be studied without the knowledge of size and structure. The direct measurement of the electrical properties of metal NPs presents a key challenge and necessitates the use of innovative experimental techniques. There have been numerous reports of two/four point resistance measurements of NPs films and also electrical conductivity of NPs films using the interdigitated microarray (IDA) electrode. However, using microwave techniques such as open ended coaxial probe (OCP) and microwave dielectric resonator (DR) for electrical characterisation of metallic NPs are much more accurate and effective compared to other traditional techniques. This is because they are inexpensive, convenient, non-destructive, contactless, hazardless (i.e. at low power) and require no special sample preparation. This research is the first attempt to determine the microwave properties of Pt and Au NP films, which were appealing materials for nano-scale electronics, using the aforementioned microwave techniques. The ease of synthesis, relatively cheap, unique catalytic activities and control over the size and the shape were the main considerations in choosing Pt and Au NPs for the present study. The initial phase of this research was to implement and validate the aperture admittance model for the OCP measurement through experiments and 3D full wave simulation using the commercially available Ansoft High Frequency Structure Simulator (HFSS), followed by the electrical characterisation of synthesised Pt NP films using the novel miniature fabricated OCP technique. The results obtained from this technique provided the inspiration to synthesise and evaluate the microwave properties of Au NPs. The findings from this technique provided the motivation to characterise both the Pt and Au NP films using the DR technique. Unlike the OCP technique, the DR method is highly sensitive but the achievable measurement accuracy is limited since this technique does not have broadband frequency capability like the OCP method. The results obtained from the DR technique show a good agreement with the theoretical prediction. In the last phase of this research, a further validation of the aperture admittance models on different types OCP (i.e. RG-405 and RG-402 cables and SMA connector) have been carried out on the developed 3D full wave models using HFSS software, followed by the development of universal models for the aforementioned OCPs based on the same 3D full wave models.

Gut-brain actions underlying comorbid anxiety and depression associated with inflammatory bowel disease.

PubMed

Abautret-Daly, Áine; Dempsey, Elaine; Parra-Blanco, Adolfo; Medina, Carlos; Harkin, Andrew

2017-03-08

Introduction Inflammatory bowel disease (IBD) is a chronic relapsing and remitting disorder characterised by inflammation of the gastrointestinal tract. There is a growing consensus that IBD is associated with anxiety- and depression-related symptoms. Psychological symptoms appear to be more prevalent during active disease states with no difference in prevalence between Crohn's disease and ulcerative colitis. Behavioural disturbances including anxiety- and depression-like symptoms have also been observed in animal models of IBD. The likely mechanisms underlying the association are discussed with particular reference to communication between the gut and brain. The close bidirectional relationship known as the gut-brain axis includes neural, hormonal and immune communication links. Evidence is provided for a number of interacting factors including activation of the inflammatory response system in the brain, the hypothalamic-pituitary-adrenal axis, and brain areas implicated in altered behaviours, changes in blood brain barrier integrity, and an emerging role for gut microbiota and response to probiotics in IBD. Discussion The impact of psychological stress in models of IBD remains somewhat conflicted, however, it is weighted in favour of stress or early stressful life events as risk factors in the development of IBD, stress-induced exacerbation of inflammation and relapse. It is recommended that patients with IBD be screened for psychological disturbance and treated accordingly as intervention can improve quality of life and may reduce relapse rates.

Five challenges for spatial epidemic models

PubMed Central

Riley, Steven; Eames, Ken; Isham, Valerie; Mollison, Denis; Trapman, Pieter

2015-01-01

Infectious disease incidence data are increasingly available at the level of the individual and include high-resolution spatial components. Therefore, we are now better able to challenge models that explicitly represent space. Here, we consider five topics within spatial disease dynamics: the construction of network models; characterising threshold behaviour; modelling long-distance interactions; the appropriate scale for interventions; and the representation of population heterogeneity. PMID:25843387

Anti-inflammatory effects of polyphenols in arthritis.

PubMed

Oliviero, Francesca; Scanu, Anna; Zamudio-Cuevas, Yessica; Punzi, Leonardo; Spinella, Paolo

2018-03-01

Polyphenols have been extensively investigated with regard to their antioxidant, anti-inflammatory, and immunomodulant properties in many inflammatory chronic conditions. The aim of this review is to summarise how these compounds can modulate the inflammatory pathways which characterise the most prevalent arthropathies including osteoarthritis, rheumatoid arthritis and crystal-induced arthritis. Among polyphenols, epigallocatechin gallate, carnosol, hydroxytyrosol, curcumin, resveratrol, kaempferol and genistein have been the most widely investigated in arthritis. The most important results of the studies outlined in this article show how polyphenolic compounds are able to inhibit the expression and the release of a number of pro-inflammatory mediators and proteolytic enzymes, the activity of different transcriptional factors and the production of reactive oxygen species in vitro. Studies on animal models of rheumatoid arthritis, osteoarthritis and gout show interesting results in terms of reduced tissue damage, restored cartilage homeostasis, and decreased levels of uric acid, respectively. Despite the multiple protective effects of polyphenols, there are no dietary recommendations for patients affected by rheumatic diseases. Future studies, including intervention trials, should be conducted to determine the relevance of polyphenols consumption or supplementation in arthritis. © 2017 Society of Chemical Industry. © 2017 Society of Chemical Industry.

MRI studies of the hydrodynamics in a USP 4 dissolution testing cell.

PubMed

Shiko, G; Gladden, L F; Sederman, A J; Connolly, P C; Butler, J M

2011-03-01

We present a detailed study of hydrodynamics inside the flow-through dissolution apparatus when operated according to USP recommendations. The pulsatile flow inside the flow-through cell was measured quantitatively using magnetic resonance imaging (MRI) at a spatial resolution of 234 × 234 μm(2) and slice thickness of 1 mm. We report the experimental protocols developed for in situ MRI studies and the effect that the operating conditions and tablet orientation have on the hydrodynamics inside commercial flow cells. It was found that the flow field inside the dissolution cells was, at most operating conditions, heterogeneous, rather than fully developed laminar flow, and characterised by re-circulation and backward flow. A model tablet was shown to be contacted by a wide distribution of local velocities as a function of position and orientation in the flow cell. The use of 1 mm beads acted as a distributor of the flow but did not suffice to ensure a fully developed laminar flow profile. These results emphasise the necessity to understand the influence of test conditions on dissolution behaviour in defining robust flow-through dissolution methods. Copyright © 2010 Wiley-Liss, Inc.

Integration of research advances in modelling and monitoring in support of WFD river basin management planning in the context of climate change.

PubMed

Quevauviller, Philippe; Barceló, Damia; Beniston, Martin; Djordjevic, Slobodan; Harding, Richard J; Iglesias, Ana; Ludwig, Ralf; Navarra, Antonio; Navarro Ortega, Alícia; Mark, Ole; Roson, Roberto; Sempere, Daniel; Stoffel, Markus; van Lanen, Henny A J; Werner, Micha

2012-12-01

The integration of scientific knowledge about possible climate change impacts on water resources has a direct implication on the way water policies are being implemented and evolving. This is particularly true regarding various technical steps embedded into the EU Water Framework Directive river basin management planning, such as risk characterisation, monitoring, design and implementation of action programmes and evaluation of the "good status" objective achievements (in 2015). The need to incorporate climate change considerations into the implementation of EU water policy is currently discussed with a wide range of experts and stakeholders at EU level. Research trends are also on-going, striving to support policy developments and examining how scientific findings and recommendations could be best taken on board by policy-makers and water managers within the forthcoming years. This paper provides a snapshot of policy discussions about climate change in the context of the WFD river basin management planning and specific advancements of related EU-funded research projects. Perspectives for strengthening links among the scientific and policy-making communities in this area are also highlighted. Copyright © 2012 Elsevier B.V. All rights reserved.

The neurobiological basis of temperament: towards a better understanding of psychopathology.

PubMed

Whittle, Sarah; Allen, Nicholas B; Lubman, Dan I; Yücel, Murat

2006-01-01

The ability to characterise psychopathologies on the basis of their underlying neurobiology is critical in improving our understanding of disorder etiology and making more effective diagnostic and treatment decisions. Given the well-documented relationship between temperament (i.e. core personality traits) and psychopathology, research investigating the neurobiological substrates that underlie temperament is potentially key to our understanding of the biological basis of mental disorder. We present evidence that specific areas of the prefrontal cortex (including the dorsolateral prefrontal, anterior cingulate, and orbitofrontal cortices) and limbic structures (including the amygdala, hippocampus and nucleus accumbens) are key regions associated with three fundamental dimensions of temperament: Negative Affect, Positive Affect, and Constraint. Proposed relationships are based on two types of research: (a) research into the neurobiological correlates of affective and cognitive processes underlying these dimensions; and (b) research into the neurobiology of various psychopathologies, which have been correlated with these dimensions. A model is proposed detailing how these structures might comprise neural networks whose functioning underlies the three temperaments. Recommendations are made for future research into the neurobiology of temperament, including the need to focus on neural networks rather than individual structures, and the importance of prospective, longitudinal, multi-modal imaging studies in at-risk youth.

Analysis of the prescribed burning practice in the pine forest of northwestern Portugal.

PubMed

Fernandes, P; Botelho, H

2004-01-01

The ignition of low-intensity fires in the dormant season in the pine stands of north-western Portugal seeks to reduce the existing fuel hazard without compromising site quality. The purpose of this study is to characterise this practice and assess its effectiveness, based on information resulting from the normal monitoring process at the management level, and using operational guidelines, fire behaviour models and a newly developed method to classify prescribed fire severity. Although the region's humid climate strongly constrains the activity of prescribed fire, 87% of the fires analysed were undertaken under acceptable meteorological and fuel moisture conditions. In fact, most operations achieved satisfactory results. On average, prescribed fire reduces by 96% the potential intensity of a wildfire occurring under extreme weather conditions, but 36% of the treated sites would still require heavy fire fighting resources to suppress such fire, and 17% would still carry it in the tree canopy. Only 10% of the prescribed burns have an excessive impact on trees or the forest floor, while 89% (normal fire weather) or 59% (extreme fire weather) comply with both ecological integrity maintenance and wildfire protection needs. Improved planning and monitoring procedures are recommended in order to overcome the current deficiencies.

Community perspectives on roles and responsibilities for strengthening primary health care in rural Ethiopia.

PubMed

Curry, Leslie A; Alpern, Rachelle; Webster, Tashonna R; Byam, Patrick; Zerihun, Abraham; Tarakeshwar, Nalini; Cherlin, Emily J; Bradley, Elizabeth H

2012-01-01

Government-community partnerships are central to developing effective, sustainable models of primary health care in low-income countries; however, evidence about the nature of partnerships lacks the perspective of community members. Our objective was to characterise community perspectives regarding the respective roles and responsibilities of government and the community in efforts to strengthen primary health care in low-income settings. We conducted a qualitative study using focus groups (n=14 groups in each of seven primary health care units in Amhara and Oromia, Ethiopia, with a total of 140 participants) in the context of the Ethiopian Millennium Rural Initiative. Results indicated that community members defined important roles and responsibilities for both communities and governments. Community roles included promoting recommended health behaviours; influencing social norms regarding health; and contributing resources as feasible. Government roles included implementing oversight of health centres; providing human resources, infrastructure, equipment, medication and supplies; and demonstrating support for community health workers, who are seen as central to the rural health system. Renewed efforts in health system strengthening highlight the importance of community participation in initiatives to improve primary health care in rural settings. Community perspectives provide critical insights to defining, implementing and sustaining partnerships in these settings.

Attribution and Characterisation of Sclerophyll Forested Landscapes Over Large Areas

NASA Astrophysics Data System (ADS)

Jones, Simon; Soto-Berelov, Mariela; Suarez, Lola; Wilkes, Phil; Woodgate, Will; Haywood, Andrew

2016-06-01

This paper presents a methodology for the attribution and characterisation of Sclerophyll forested landscapes over large areas. First we define a set of woody vegetation data primitives (e.g. canopy cover, leaf area index (LAI), bole density, canopy height), which are then scaled-up using multiple remote sensing data sources to characterise and extract landscape woody vegetation features. The advantage of this approach is that vegetation landscape features can be described from composites of these data primitives. The proposed data primitives act as building blocks for the re-creation of past woody characterisation schemes as well as allowing for re-compilation to support present and future policy and management and decision making needs. Three main research sites were attributed; representative of different sclerophyll woody vegetated systems (Box Iron-bark forest; Mountain Ash forest; Mixed Species foothills forest). High resolution hyperspectral and full waveform LiDAR data was acquired over the three research sites. At the same time, land management agencies (Victorian Department of Environment, Land Water and Planning) and researchers (RMIT, CRC for Spatial Information and CSIRO) conducted fieldwork to collect structural and functional measurements of vegetation, using traditional forest mensuration transects and plots, terrestrial lidar scanning and high temporal resolution in-situ autonomous laser (VegNet) scanners. Results are presented of: 1) inter-comparisons of LAI estimations made using ground based hemispherical photography, LAI 2200 PCA, CI-110 and terrestrial and airborne laser scanners; 2) canopy height and vertical canopy complexity derived from airborne LiDAR validated using ground observations; and, 3) time-series characterisation of land cover features. 1. Accuracy targets for remotely sensed LAI products to match within ground based estimates are ± 0.5 LAI or a 20% maximum (CEOS/GCOS) with new aspirational targets of 5%). In this research we conducted a total of 67 ground-based method-to-method pairwise comparisons across 11 plots in five sites, incorporating the previously mentioned LAI methods. Out of the 67 comparisons, 29 had an RMSE ≥ 0.5 LAIe. This has important implications for the validation of remotely sensed products since ground based techniques themselves exhibit LAI variations greater than internationally recommended guidelines for satellite product accuracies. 2. Two methods of canopy height derivation are proposed and tested over a large area (4 Million Ha). 99th percentile maximum height achieved a RMSE of 6.6%, whilst 95th percentile dominant height a RMSE = 10.3%. Vertical canopy complexity (i.e. the number of forest layers of strata) was calculated as the local maxima of vegetation density within the LiDAR canopy profile and determined using a cubic spline smoothing of Pgap. This was then validated against in-situ and LiDAR observations of canopy strata with an RMSE 0.39 canopy layers. 3. Preliminary results are presented of landcover characterisation using LandTrendr analysis of Landsat LEDAPS data. kNN is then used to link these features to a dense network of 800 field plots sites.

Effects of different excitation waveforms on detection and characterisation of delamination in PV modules by active infrared thermography

NASA Astrophysics Data System (ADS)

Sinha, Archana; Gupta, Rajesh

2017-10-01

Delamination significantly affects the performance and reliability of photovoltaic (PV) modules. Recently, an active infrared thermography approach using step heating has been exploited for the detection and characterisation of delamination in PV modules. However, step heating takes longer observation time and causes overheating problems. This paper presents the effects of different thermal excitation waveforms namely rectangular, half-sine and short pulse, on the detection and characterisation of delamination in PV module by experiments and simulations. For simulation, a 3-dimensional electro-thermal model of heat conduction, based on resistance-capacitance network approach, has been exploited to study the variation in maximum thermal contrast and peak contrast time with the delamination thickness and heating parameters. Results show that the rectangular waveform provides better detection of delamination due to higher absolute contrast, while the half-sine waveform allows better characterisation of delamination in the PV modules with low-cost and low-power heat source. The high-energy short pulse enabled quick visualisation of delamination, but has limited practical implementation. The advantages and limitations of each waveform have been highlighted to assess the specific requirement for appropriate choice in the non-destructive thermographic inspection of delamination in PV modules at the manufacturing units or outdoor fields.

Altered resting-state whole-brain functional networks of neonates with intrauterine growth restriction.

PubMed

Batalle, Dafnis; Muñoz-Moreno, Emma; Tornador, Cristian; Bargallo, Nuria; Deco, Gustavo; Eixarch, Elisenda; Gratacos, Eduard

2016-04-01

The feasibility to use functional MRI (fMRI) during natural sleep to assess low-frequency basal brain activity fluctuations in human neonates has been demonstrated, although its potential to characterise pathologies of prenatal origin has not yet been exploited. In the present study, we used intrauterine growth restriction (IUGR) as a model of altered neurodevelopment due to prenatal condition to show the suitability of brain networks to characterise functional brain organisation at neonatal age. Particularly, we analysed resting-state fMRI signal of 20 neonates with IUGR and 13 controls, obtaining whole-brain functional networks based on correlations of blood oxygen level-dependent (BOLD) signal in 90 grey matter regions of an anatomical atlas (AAL). Characterisation of the networks obtained with graph theoretical features showed increased network infrastructure and raw efficiencies but reduced efficiency after normalisation, demonstrating hyper-connected but sub-optimally organised IUGR functional brain networks. Significant association of network features with neurobehavioral scores was also found. Further assessment of spatiotemporal dynamics displayed alterations into features associated to frontal, cingulate and lingual cortices. These findings show the capacity of functional brain networks to characterise brain reorganisation from an early age, and their potential to develop biomarkers of altered neurodevelopment. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessment of electrochemical properties of a biogalvanic system for tissue characterisation

PubMed Central

Chandler, J.H.; Culmer, P.R.; Jayne, D.G.; Neville, A.

2015-01-01

Biogalvanic characterisation is a promising method for obtaining health-specific tissue information. However, there is a dearth of understanding in the literature regarding the underlying galvanic cell, electrode reactions and their controlling factors which limits the application of the technique. This work presents a parametric electrochemical investigation into a zinc–copper galvanic system using salt (NaCl) solution analogues at physiologically-relevant concentrations (1.71, 17.1 & 154 mM). The potential difference at open cell, closed cell maximum current and the internal resistance (based on published characterisation methods) were measured. Additionally, independent and relative polarisation scans of the electrodes were performed to improve understanding of the system. Our findings suggest that the prominent reaction at the cathode is that of oxygen-reduction, not hydrogen-evolution. Results indicate that cell potentials are influenced by the concentration of dissolved oxygen at low currents and maximum closed cell currents are limited by the rate of oxygen diffusion to the cathode. Characterised internal resistance values for the salt solutions did not correspond to theoretical values at the extremes of concentration (1.71 and 154 mM) due to electrode resistance and current limitation. Existing biogalvanic models do not consider these phenomena and should be improved to advance the technique and its practical application. PMID:25460609

A tuneable approach to uniform light distribution for artificial daylight photodynamic therapy.

PubMed

O'Mahoney, Paul; Haigh, Neil; Wood, Kenny; Brown, C Tom A; Ibbotson, Sally; Eadie, Ewan

2018-06-16

Implementation of daylight photodynamic therapy (dPDT) is somewhat limited by variable weather conditions. Light sources have been employed to provide artificial dPDT indoors, with low irradiances and longer treatment times. Uniform light distribution across the target area is key to ensuring effective treatment, particularly for large areas. A novel light source is developed with tuneable direction of light emission in order to meet this challenge. Wavelength composition of the novel light source is controlled such that the protoporphyrin-IX (PpIX) weighed spectra of both the light source and daylight match. The uniformity of the light source is characterised on a flat surface, a model head and a model leg. For context, a typical conventional PDT light source is also characterised. Additionally, the wavelength uniformity across the treatment site is characterised. The PpIX-weighted spectrum of the novel light source matches with PpIX-weighted daylight spectrum, with irradiance values within the bounds for effective dPDT. By tuning the direction of light emission, improvements are seen in the uniformity across large anatomical surfaces. Wavelength uniformity is discussed. We have developed a light source that addresses the challenges in uniform, multiwavelength light distribution for large area artificial dPDT across curved anatomical surfaces. Copyright © 2018. Published by Elsevier B.V.

Prevention, screening and treatment of colorectal cancer: a global and regional generalized cost effectiveness analysis

PubMed Central

2010-01-01

Background Regional generalized cost-effectiveness estimates of prevention, screening and treatment interventions for colorectal cancer are presented. Methods Standardised WHO-CHOICE methodology was used. A colorectal cancer model was employed to provide estimates of screening and treatment effectiveness. Intervention effectiveness was determined via a population state-transition model (PopMod) that simulates the evolution of a sub-regional population accounting for births, deaths and disease epidemiology. Economic costs of procedures and treatment were estimated, including programme overhead and training costs. Results In regions characterised by high income, low mortality and high existing treatment coverage, the addition of screening to the current high treatment levels is very cost-effective, although no particular intervention stands out in cost-effectiveness terms relative to the others. In regions characterised by low income, low mortality with existing treatment coverage around 50%, expanding treatment with or without screening is cost-effective or very cost-effective. Abandoning treatment in favour of screening (no treatment scenario) would not be cost effective. In regions characterised by low income, high mortality and low treatment levels, the most cost-effective intervention is expanding treatment. Conclusions From a cost-effectiveness standpoint, screening programmes should be expanded in developed regions and treatment programmes should be established for colorectal cancer in regions with low treatment coverage. PMID:20236531

Characterising urban zinc generation to identify surface pollutant hotspots in a low intensity rainfall climate.

PubMed

Charters, F J; Cochrane, T A; O'Sullivan, A D

2017-09-01

Characterising stormwater runoff quality provides useful insights into the dynamics of pollutant generation and wash off rates. These can be used to prioritise stormwater management strategies. This study examined the effects of a low intensity rainfall climate on zinc contributions from different impermeable urban surface types. First flush (FF) and steady state samples were collected from seven different surfaces for characterisation, and the data were also used to calibrate an event-based pollutant load model to predict individual 'hotspot' surfaces across the catchment. Unpainted galvanised roofs generated very high concentrations of zinc, primarily in the more biologically available dissolved form. An older, unpainted galvanised roof had FF concentrations averaging 32,338 μg/L, while the new unpainted roof averaged 4,782 μg/L. Roads and carparks also had elevated zinc, but FF concentrations averaged only 822-1,584 μg/L. Modelling and mapping expected zinc loads from individual impermeable surfaces across the catchment identified specific commercial roof surfaces to be targeted for zinc management. The results validate a policy strategy to replace old galvanised roof materials and avoid unpainted galvanised roofing in future urban development for better urban water quality outcomes. In the interim, readily-implemented treatment options are required to help mitigate chronic zinc impacts on receiving waterways.

Characterisation of antibiotic prescriptions for acute respiratory tract infections in Danish general practice: a retrospective registry based cohort study.

PubMed

Aabenhus, Rune; Hansen, Malene Plejdrup; Saust, Laura Trolle; Bjerrum, Lars

2017-05-19

Inappropriate use of antibiotics is contributing to the increasing rates of antimicrobial resistance. Several Danish guidelines on antibiotic prescribing for acute respiratory tract infections in general practice have been issued to promote rational prescribing of antibiotics, however it is unclear if these recommendations are followed. We aimed to characterise the pattern of antibiotic prescriptions for patients diagnosed with acute respiratory tract infections, by means of electronic prescriptions, labeled with clinical indications, from Danish general practice. Acute respiratory tract infections accounted for 456,532 antibiotic prescriptions issued between July 2012 and June 2013. Pneumonia was the most common indication with 178,354 prescriptions (39%), followed by acute tonsillitis (21%) and acute otitis media (19%). In total, penicillin V accounted for 58% of all prescriptions, followed by macrolides (18%) and amoxicillin (15%). The use of second-line agents increased with age for all indications, and comprised more than 40% of the prescriptions in patients aged >75 years. Women were more often prescribed antibiotics regardless of clinical indication. This is the first Danish study to characterise antibiotic prescription patterns for acute respiratory tract infections by data linkage of clinical indications. The findings confirm that penicillin V is the most commonly prescribed antibiotic agent for treatment of patients with an acute respiratory tract infection in Danish general practice. However, second-line agents like macrolides and amoxicillin with or without clavulanic acid are overused. Strategies to improve the quality of antibiotic prescribing especially for pneumonia, acute otitis media and acute rhinosinusitis are warranted. TRACKING THE OVERUSE OF ANTIBIOTICS: Better adherence to guidelines for prescribing antibiotics for different respiratory tract infections are warranted in Danish general practice. The over-use of antibiotics, particularly so-called 'second-line' agents such as amoxicillin, increases resistance and may lead to a potentially catastrophic scenario where antibiotics are no longer effective. Exactly how widespread the over-use of antibiotics is for different infections, however, is not clear. Rune Aabenhus at the University of Copenhagen and co-workers analyzed primary care data regarding antibiotic prescriptions for acute respiratory tract infections including pneumonia and ear infections in Denmark. They found that penicillin V-the current recommended first-line drug in Scandinavian countries-accounted for 58 per cent of prescriptions, a figure which should be improved. Amoxicillin and macrolides were over-prescribed, particularly in elderly patients. The team also call for further analysis of prescriptions given by out-of-hours clinics.

A Longitudinal Operant Assessment of Cognitive and Behavioural Changes in the HdhQ111 Mouse Model of Huntington’s Disease

PubMed Central

Dunnett, Stephen B.; Brooks, Simon P.

2016-01-01

Huntington’s disease (HD) is characterised by motor symptoms which are often preceded by cognitive and behavioural changes, that can significantly contribute to disease burden for people living with HD. Numerous knock-in mouse models of HD are currently available for scientific research. However, before their use, they must be behaviourally characterised to determine their suitability in recapitulating the symptoms of the human condition. Thus, we sought to longitudinally characterise the nature, severity and time course of cognitive and behavioural changes observed in HdhQ111 heterozygous knock-in mice.To determine changes in cognition and behaviour an extensive battery of operant tests including: fixed ratio, progressive ratio, the five choice serial reaction time task and the serial implicit learning task, were applied longitudinally to HdhQ111 and wild type mice. The operant test battery was conducted at 6, 12 and 18 months of age. Significant deficits were observed in HdhQ111 animals in comparison to wild type animals in all operant tests indicating altered cognition (attentional and executive function) and motivation. However, the cognitive and behavioural deficits observed were not shown to be progressive over time in the longitudinal testing paradigm that was utilised. The results therefore demonstrate that the HdhQ111 mouse model of HD reflects some features of the cognitive and behavioural changes shown in the human condition of HD. Although, the cognitive and behavioural deficits demonstrated were not shown to be progressive over time. PMID:27701442

When is cough functional, and how should it be treated?

PubMed Central

Lockshin, Boris

2017-01-01

Key points Habit cough is most commonly characterised by a repetitive loud barking cough that persists for prolonged periods. The cough interferes with normal activity and substantially decreases the quality of life. The sine qua non is the total absence of this troublesome cough once asleep. The age distribution ranges from 4 years to late adolescence, with 85% of cases occurring from 8 to 14 years of age; similar cough in adults is much less common and poorly characterised. Pharmacological treatment is ineffective. A simple behavioural approach called suggestion therapy has been applied with success by many physicians. The natural history in the absence of treatment can result in persistence for months to years. Educational aims To increase awareness of functional cough as a non-organically caused symptom in children and adolescents. To provide the means of diagnosing a functional cough based on the distinguishing characteristics of this cause of chronic cough. To understand the principles of treating a functional cough with a simple behavioural technique called suggestion therapy. Summary Involuntary cough without an identified underlying organic reason has been given various names and recommended treatments. Current experience in children and adolescents suggests that “habit cough” best describes this entity, and suggestion therapy is a highly effective treatment that most physicians can learn. PMID:28289448

Basin Characterisation by Means of Joint Inversion of Electromagnetic Geophysical Data, Borehole Data and Multivariate Statistical Methods: The Loop Head Peninsula, Western Ireland, Case Study

NASA Astrophysics Data System (ADS)

Campanya, J. L.; Ogaya, X.; Jones, A. G.; Rath, V.; McConnell, B.; Haughton, P.; Prada, M.

2016-12-01

The Science Foundation Ireland funded project IRECCSEM project (www.ireccsem.ie) aims to evaluate Ireland's potential for onshore carbon sequestration in saline aquifers by integrating new electromagnetic geophysical data with existing geophysical and geological data. One of the objectives of this component of IRECCSEM is to characterise the subsurface beneath the Loop Head Peninsula (part of Clare Basin, Co. Clare, Ireland), and identify major electrical resistivity structures that can guide an interpretation of the carbon sequestration potential of this area. During the summer of 2014, a magnetotelluric (MT) survey was carried out on the Loop Head Peninsula, and data from a total of 140 sites were acquired, including audio-magnetotelluric (AMT), and broadband magnetotelluric (BBMT). The dataset was used to generate shallow three-dimensional (3-D) electrical resistivity models constraining the subsurface to depths of up to 3.5 km. The three-dimensional (3-D) joint inversions were performed using three different types of electromagnetic data: MT impedance tensor (Z), geomagnetic transfer functions (T), and inter-station horizontal magnetic transfer-functions (H). The interpretation of the results was complemented with second-derivative models of the resulting electrical resistivity models, and a quantitative comparison with borehole data using multivariate statistical methods. Second-derivative models were used to define the main interfaces between the geoelectrical structures, facilitating superior comparison with geological and seismic results, and also reducing the influence of the colour scale when interpreting the results. Specific analysis was performed to compare the extant borehole data with the electrical resistivity model, identifying those structures that are better characterised by the resistivity model. Finally, the electrical resistivity model was also used to propagate some of the physical properties measured in the borehole, when a good relation was possible between the different types of data. The final results were compared with independent geological and geophysical data for a high-quality interpretation.

Characterisation of vitamin and mineral supplement users differentiated according to their motives for using supplements: results of the German National Nutrition Monitoring (NEMONIT).

PubMed

Frey, Anne; Hoffmann, Ingrid; Heuer, Thorsten

2017-08-01

To characterise German vitamin and mineral supplement users differentiated by their motives for supplement use. Data were obtained from the German National Nutrition Monitoring (2010/11) via two 24 h dietary recalls and a telephone interview. Motive-based subgroups of supplement users were identified by factor and cluster analysis. Sociodemographic, lifestyle, health and dietary characteristics and supplement use were examined. Differences were analysed using χ 2 tests, logistic and linear regression models. Germany, nationwide. Individuals (n 1589) aged 18-80 years. Three motive-based subgroups were identified: a 'Prevention' subgroup (n 324), characterised by the motive to prevent nutrient deficiencies; a 'Prevention and additional benefits' subgroup (n 166), characterised by motives to prevent health problems and improve well-being and performance; and a 'Treatment' subgroup (n 136), characterised by motives to treat nutrient deficiencies or diseases. Members of the two prevention subgroups had a higher Healthy Eating Index score and tended to be more physically active than non-users. Those in the 'Prevention and additional benefits' subgroup supplemented with a greater number of micronutrients. Members of the 'Treatment' subgroup tended to be older and have a lower self-reported health status than non-users, and supplemented with a smaller number of micronutrients. The majority of supplement users take supplements for preventive purposes and they are more health conscious than non-users of supplements due to their concerns about developing health problems. Those supplementing for treatment purposes may have underlying health indications and may be more likely to benefit from supplementation than those supplementing for preventive purposes.

Advanced numerical models and material characterisation techniques for composite materials subject to impact and shock wave loading

NASA Astrophysics Data System (ADS)

Clegg, R. A.; White, D. M.; Hayhurst, C.; Ridel, W.; Harwick, W.; Hiermaier, S.

2003-09-01

The development and validation of an advanced material model for orthotropic materials, such as fibre reinforced composites, is described. The model is specifically designed to facilitate the numerical simulation of impact and shock wave propagation through orthotropic materials and the prediction of subsequent material damage. Initial development of the model concentrated on correctly representing shock wave propagation in composite materials under high and hypervelocity impact conditions [1]. This work has now been extended to further concentrate on the development of improved numerical models and material characterisation techniques for the prediction of damage, including residual strength, in fibre reinforced composite materials. The work is focussed on Kevlar-epoxy however materials such as CFRP are also being considered. The paper describes our most recent activities in relation to the implementation of advanced material modelling options in this area. These enable refined non-liner directional characteristics of composite materials to be modelled, in addition to the correct thermodynamic response under shock wave loading. The numerical work is backed by an extensive experimental programme covering a wide range of static and dynamic tests to facilitate derivation of model input data and to validate the predicted material response. Finally, the capability of the developing composite material model is discussed in relation to a hypervelocity impact problem.

Intake of water and different beverages in adults across 13 countries.

PubMed

Guelinckx, I; Ferreira-Pêgo, C; Moreno, L A; Kavouras, S A; Gandy, J; Martinez, H; Bardosono, S; Abdollahi, M; Nasseri, E; Jarosz, A; Ma, G; Carmuega, E; Babio, N; Salas-Salvadó, J

2015-06-01

To describe the intake of water and all other fluids and to evaluate the proportion of adults exceeding the World Health Organisation (WHO) recommendations on energy intake from free sugar, solely from fluids. A total of 16,276 adults (46 % men, mean age 39.8 years) were recruited in 13 countries from 3 continents. A 24-h fluid-specific record over 7 days was used for fluid assessment. In Spain, France, Turkey, Iran, Indonesia and China, fluid intake was characterised by a high contribution of water (47-78 %) to total fluid intake (TFI), with a mean water intake between 0.76 and 1.78 L/day, and a mean energy intake from fluids from 182 to 428 kcal/day. Between 11 and 49 % of adults exceeded the free sugar WHO recommendations, considering solely fluids. In Germany, UK, Poland and Japan, the largest contributors to TFI were hot beverages (28-50 %) and water (18-32 %). Mean energy intake from fluids ranged from 415 to 817 kcal/day, and 48-62 % of adults exceeded free sugar WHO recommendations. In Mexico, Brazil and Argentina, the contribution of juices and regular sugar beverages (28-41 %) was as important as the water contribution to TFI (17-39 %). Mean energy intake from fluids ranged 565-694 kcal/day, and 60-66 % of the adults exceeded the free sugar WHO recommendation. The highest volumes recorded in most of the countries were for water, mean energy intake from fluids was up to 694 kcal/day, and 66 % of adults exceeded the free sugar WHO recommendation solely by fluids. Actions to create an environment in favour of water consumption and reduce sugar intake from fluids therefore are warranted.

Decay of intestinal enterococci concentrations in high-energy estuarine and coastal waters: towards real-time T90 values for modelling faecal indicators in recreational waters.

PubMed

Kay, D; Stapleton, C M; Wyer, M D; McDonald, A T; Crowther, J; Paul, N; Jones, K; Francis, C; Watkins, J; Wilkinson, J; Humphrey, N; Lin, B; Yang, L; Falconer, R A; Gardner, S

2005-02-01

Intestinal enterococci are the principal 'health-evidence-based' parameter recommended by WHO for the assessment of marine recreational water compliance. Understanding the survival characteristics of these organisms in nearshore waters is central to public health protection using robust modelling to effect real-time prediction of water quality at recreation sites as recently suggested by WHO and the Commission of the European Communities Previous models have more often focused on the coliform parameters and assumed two static day-time and night-time T90 values to characterise the decay process. The principal driver for enterococci survival is the received dose of irradiance from sunlight. In the water column, transmission of irradiance is determined by turbidity produced by suspended material. This paper reports the results of irradiated microcosm experiments using simulated sunlight to investigate the decay of intestinal enterococci in relatively turbid estuarine and coastal waters collected from the Severn Estuary and Bristol Channel, UK. High-turbidity estuarine waters produced a T90 value of 39.5 h. Low-turbidity coastal waters produced a much shorter T90 value of 6.6 h. In experiments receiving no irradiation, high-turbidity estuarine waters also produced a longer T90 of 65.1 h compared with corresponding low-turbidity coastal waters, T90 24.8 h. Irradiated T90 values were correlated with salinity, turbidity and suspended solids (r>0.8, p<0.001). The results suggest that enterococci decay in irradiated experiments with turbidity >200 NTU is similar to decay observed under dark conditions. Most significantly, these results suggest that modelling turbidity and or suspended solids offers a potential means of predicting T90 values in 'real-time' for discrete cells of a hydrodynamic model.

Characterising food environment exposure at home, at work, and along commuting journeys using data on adults in the UK.

PubMed

Burgoine, Thomas; Monsivais, Pablo

2013-06-27

Socio-ecological models of behaviour suggest that dietary behaviours are potentially shaped by exposure to the food environment ('foodscape'). Research on associations between the foodscape and diet and health has largely focussed on foodscapes around the home, despite recognition that non-home environments are likely to be important in a more complete assessment of foodscape exposure. This paper characterises and describes foodscape exposure of different types, at home, at work, and along commuting routes for a sample of working adults in Cambridgeshire, UK. Home and work locations, and transport habits for 2,696 adults aged 29-60 were drawn from the Fenland Study, UK. Food outlet locations were obtained from local councils and classified by type - we focus on convenience stores, restaurants, supermarkets and takeaway food outlets. Density of and proximity to food outlets was characterised at home and work. Commuting routes were modelled based on the shortest street network distance between home and work, with exposure (counts of food outlets) that accounted for travel mode and frequency. We describe these three domains of food environment exposure using descriptive and inferential statistics. For all types of food outlet, we found very different foodscapes around homes and workplaces (with overall outlet exposure at work 125% higher), as well as a potentially substantial exposure contribution from commuting routes. On average, work and commuting environments each contributed to foodscape exposure at least equally to residential neighbourhoods, which only accounted for roughly 30% of total exposure. Furthermore, for participants with highest overall exposure to takeaway food outlets, workplaces accounted for most of the exposure. Levels of relative exposure between home, work and commuting environments were poorly correlated. Relying solely on residential neighbourhood characterisation greatly underestimated total foodscape exposure in this sample, with levels of home exposure unrelated to levels of away from home exposure. Such mis-estimation is likely to be expressed in analyses as attenuated parameter estimates, suggesting a minimal 'environmental' contribution to outcomes of interest. Future work should aim to assess exposure more completely through characterising environments beyond the residential neighbourhood, where behaviours related to food consumption are likely to occur.

Slip-based terrain estimation with a skid-steer vehicle

NASA Astrophysics Data System (ADS)

Reina, Giulio; Galati, Rocco

2016-10-01

In this paper, a novel approach for online terrain characterisation is presented using a skid-steer vehicle. In the context of this research, terrain characterisation refers to the estimation of physical parameters that affects the terrain ability to support vehicular motion. These parameters are inferred from the modelling of the kinematic and dynamic behaviour of a skid-steer vehicle that reveals the underlying relationships governing the vehicle-terrain interaction. The concept of slip track is introduced as a measure of the slippage experienced by the vehicle during turning motion. The proposed terrain estimation system includes common onboard sensors, that is, wheel encoders, electrical current sensors and yaw rate gyroscope. Using these components, the system can characterise terrain online during normal vehicle operations. Experimental results obtained from different surfaces are presented to validate the system in the field showing its effectiveness and potential benefits to implement adaptive driving assistance systems or to automatically update the parameters of onboard control and planning algorithms.

High resolution melting analysis: rapid and precise characterisation of recombinant influenza A genomes

PubMed Central

2013-01-01

Background High resolution melting analysis (HRM) is a rapid and cost-effective technique for the characterisation of PCR amplicons. Because the reverse genetics of segmented influenza A viruses allows the generation of numerous influenza A virus reassortants within a short time, methods for the rapid selection of the correct recombinants are very useful. Methods PCR primer pairs covering the single nucleotide polymorphism (SNP) positions of two different influenza A H5N1 strains were designed. Reassortants of the two different H5N1 isolates were used as a model to prove the suitability of HRM for the selection of the correct recombinants. Furthermore, two different cycler instruments were compared. Results Both cycler instruments generated comparable average melting peaks, which allowed the easy identification and selection of the correct cloned segments or reassorted viruses. Conclusions HRM is a highly suitable method for the rapid and precise characterisation of cloned influenza A genomes. PMID:24028349

Electrical in-situ characterisation of interface stabilised organic thin-film transistors

PubMed Central

Striedinger, Bernd; Fian, Alexander; Petritz, Andreas; Lassnig, Roman; Winkler, Adolf; Stadlober, Barbara

2015-01-01

We report on the electrical in-situ characterisation of organic thin film transistors under high vacuum conditions. Model devices in a bottom-gate/bottom-contact (coplanar) configuration are electrically characterised in-situ, monolayer by monolayer (ML), while the organic semiconductor (OSC) is evaporated by organic molecular beam epitaxy (OMBE). Thermal SiO2 with an optional polymer interface stabilisation layer serves as the gate dielectric and pentacene is chosen as the organic semiconductor. The evolution of transistor parameters is studied on a bi-layer dielectric of a 150 nm of SiO2 and 20 nm of poly((±)endo,exo-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid, diphenylester) (PNDPE) and compared to the behaviour on a pure SiO2 dielectric. The thin layer of PNDPE, which is an intrinsically photo-patternable organic dielectric, shows an excellent stabilisation performance, significantly reducing the calculated interface trap density at the OSC/dielectric interface up to two orders of magnitude, and thus remarkably improving the transistor performance. PMID:26457122

The dynamical modeling and simulation analysis of the recommendation on the user-movie network

NASA Astrophysics Data System (ADS)

Zhang, Shujuan; Jin, Zhen; Zhang, Juan

2016-12-01

At present, most research about the recommender system is based on graph theory and algebraic methods, but these methods cannot predict the evolution of the system with time under the recommendation method, and cannot dynamically analyze the long-term utility of the recommendation method. However, these two aspects can be studied by the dynamical method, which essentially investigates the intrinsic evolution mechanism of things, and is widely used to study a variety of actual problems. So, in this paper, network dynamics is used to study the recommendation on the user-movie network, which consists of users and movies, and the movies are watched either by the personal search or through the recommendation. Firstly, dynamical models are established to characterize the personal search and the system recommendation mechanism: the personal search model, the random recommendation model, the preference recommendation model, the degree recommendation model and the hybrid recommendation model. The rationality of the models established is verified by comparing the stochastic simulation with the numerical simulation. Moreover, the validity of the recommendation methods is evaluated by studying the movie degree, which is defined as the number of the movie that has been watched. Finally, we combine the personal search and the recommendation to establish a more general model. The change of the average degree of all the movies is given with the strength of the recommendation. Results show that for each recommendation method, the change of the movie degree is different, and is related to the initial degree of movies, the adjacency matrix A representing the relation between users and movies, the time t. Additionally, we find that in a long time, the degree recommendation is not as good as that in a short time, which fully demonstrates the advantage of the dynamical method. For the whole user-movie system, the preference recommendation is the best.

Two-stage Bayesian model to evaluate the effect of air pollution on chronic respiratory diseases using drug prescriptions.

PubMed

Blangiardo, Marta; Finazzi, Francesco; Cameletti, Michela

2016-08-01

Exposure to high levels of air pollutant concentration is known to be associated with respiratory problems which can translate into higher morbidity and mortality rates. The link between air pollution and population health has mainly been assessed considering air quality and hospitalisation or mortality data. However, this approach limits the analysis to individuals characterised by severe conditions. In this paper we evaluate the link between air pollution and respiratory diseases using general practice drug prescriptions for chronic respiratory diseases, which allow to draw conclusions based on the general population. We propose a two-stage statistical approach: in the first stage we specify a space-time model to estimate the monthly NO2 concentration integrating several data sources characterised by different spatio-temporal resolution; in the second stage we link the concentration to the β2-agonists prescribed monthly by general practices in England and we model the prescription rates through a small area approach. Copyright © 2016 Elsevier Ltd. All rights reserved.

The clinical utility of bone marker measurements in osteoporosis

PubMed Central

2013-01-01

Osteoporosis is characterised by low bone mass and structural deterioration of bone tissue, resulting in increased fragility and susceptibility to fracture. Osteoporotic fractures are a significant cause of morbidity and mortality. Direct medical costs from such fractures in the UK are currently estimated at over two billion pounds per year, resulting in a substantial healthcare burden that is expected to rise exponentially due to increasing life expectancy. Currently bone mineral density is the WHO standard for diagnosis of osteoporosis, but poor sensitivity means that potential fractures will be missed if it is used alone. During the past decade considerable progress has been made in the identification and characterisation of specific biomarkers to aid the management of metabolic bone disease. Technological developments have greatly enhanced assay performance producing reliable, rapid, non-invasive cost effective assays with improved sensitivity and specificity. We now have a greater understanding of the need to regulate pre-analytical sample collection to minimise the effects of biological variation. However, bone turnover markers (BTMs) still have limited clinical utility. It is not routinely recommended to use BTMs to select those at risk of fractures, but baseline measurements of resorption markers are useful before commencement of anti-resorptive treatment and can be checked 3–6 months later to monitor response and adherence to treatment. Similarly, formation markers can be used to monitor bone forming agents. BTMs may also be useful when monitoring patients during treatment holidays and aid in the decision as to when therapy should be recommenced. Recent recommendations by the Bone Marker Standards Working Group propose to standardise research and include a specific marker of bone resorption (CTX) and bone formation (P1NP) in all future studies. It is hoped that improved research in turn will lead to optimised markers for the clinical management of osteoporosis and other bone diseases. PMID:23984630

Paediatric intestinal cancer and polyposis due to bi-allelic PMS2 mutations: case series, review and follow-up guidelines.

PubMed

Herkert, Johanna C; Niessen, Renée C; Olderode-Berends, Maria J W; Veenstra-Knol, Hermine E; Vos, Yvonne J; van der Klift, Heleen M; Scheenstra, Rene; Tops, Carli M J; Karrenbeld, Arend; Peters, Frans T M; Hofstra, Robert M W; Kleibeuker, Jan H; Sijmons, Rolf H

2011-05-01

Bi-allelic germline mutations of one of the DNA mismatch repair genes, so far predominantly found in PMS2, cause constitutional MMR-deficiency syndrome. This rare disorder is characterised by paediatric intestinal cancer and other malignancies. We report the clinical, immunohistochemical and genetic characterisation of four families with bi-allelic germline PMS2 mutations. We present an overview of the published gastrointestinal manifestations of CMMR-D syndrome and propose recommendations for gastro-intestinal screening. The first proband developed a cerebral angiosarcoma at age 2 and two colorectal adenomas at age 7. Genetic testing identified a complete PMS2 gene deletion and a frameshift c.736_741delinsTGTGTGTGAAG (p.Pro246CysfsX3) mutation. In the second family, both the proband and her brother had multiple intestinal adenomas, initially wrongly diagnosed as familial adenomatous polyposis. A splice site c.2174+1G>A, and a missense c.137G>T (p.Ser46Ile) mutation in PMS2 were identified. The third patient was diagnosed with multiple colorectal adenomas at age 11; he developed a high-grade dysplastic colorectal adenocarcinoma at age 21. Two intragenic PMS2 deletions were found. The fourth proband developed a cerebral anaplastic ganglioma at age 9 and a high-grade colerectal dysplastic adenoma at age 10 and carries a homozygous c.2174+1G>A mutation. Tumours of all patients showed microsatellite instability and/or loss of PMS2 expression. Our findings show the association between bi-allelic germline PMS2 mutations and severe childhood-onset gastrointestinal manifestations, and support the notion that patients with early-onset gastrointestinal adenomas and cancer should be investigated for CMMR-D syndrome. We recommend yearly follow-up with colonoscopy from age 6 and simultaneous video-capsule small bowel enteroscopy from age 8. Copyright © 2011 Elsevier Ltd. All rights reserved.

Ageing midface: The impact of surgeon's experience on the consistency in the assessment and proposed management.

PubMed

Hazrati, Ali; Izadpanah, Ali; Zadeh, Teanoosh; Gosman, Amanda; Chao, James J; Dobke, Marek K

2011-02-01

An individual's face undergoes numerous changes throughout life. Since mid-face aesthetic units are key areas for rejuvenation procedures, their comprehensive assessment is essential for the development of any aesthetic management plan. Despite the availability of many evaluation criteria for treatment of mid-face ageing, there are discrepancies existing in both assessment and management approaches. The goal of this study was to determine if there are any identifiable profiles of clinical judgements and approaches related to the level of surgeon's experience. Forty seven standardised non-digital and not altered natural size photographic images of patients' faces (front and profile) were presented to eight senior board certified plastic surgeons, eight junior non-board certified plastic surgeons and eight plastic surgery residents from an independent program. Surveyed physicians were 'blinded' from each other and asked to assess five different major features characterising ageing mid-face. An interclass correlation data analysis was performed and the Cronbach coefficient alpha values were computed for each category. Responses obtained from senior plastic surgeons were consistently characterised by higher Cronbach coefficient alpha values indicating higher concordance. The highest agreement levels were obtained for the assessment of rhytids and jowls across all groups and the lowest agreement levels were obtained for the assessment and recommendation of upper lip management. This study illustrated that discrepancies in clinical assessments and surgical management exist among surgeons involved in the aesthetic surgery of the mid-face ageing. It appears that the level of surgeon's experience significantly impacts the inter-rater reliability and consensus in assessment and treatment of mid-face ageing. The most senior plastic surgeons' assessment and recommendations had the highest level of concordance while the junior non-board certified plastic surgeons and the residents group produced variations with less consistency. Copyright © 2010 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.

Growth in Mathematical Understanding: How Can We Characterise It and How Can We Represent It?

ERIC Educational Resources Information Center

Pirie, Susan; Kieren, Thomas

1994-01-01

Proposes a model for the growth of mathematical understanding based on the consideration of understanding as a whole, dynamic, leveled but nonlinear process. Illustrates the model using the concept of fractions. How to map the growth of understanding is explained in detail. (Contains 26 references.) (MKR)

SPH numerical investigation of the characteristics of an oscillating hydraulic jump at an abrupt drop

NASA Astrophysics Data System (ADS)

De Padova, Diana; Mossa, Michele; Sibilla, Stefano

2018-02-01

This paper shows the results of the smooth particle hydrodynamics (SPH) modelling of the hydraulic jump at an abrupt drop, where the transition from supercritical to subcritical flow is characterised by several flow patterns depending upon the inflow and tailwater conditions. SPH simulations are obtained by a pseudo-compressible XSPH scheme with pressure smoothing; turbulent stresses are represented either by an algebraic mixing-length model, or by a two-equation k- ɛ model. The numerical model is applied to analyse the occurrence of oscillatory flow conditions between two different jump types characterised by quasi-periodic oscillation, and the results are compared with experiments performed at the hydraulics laboratory of Bari Technical University. The purpose of this paper is to obtain a deeper understanding of the physical features of a flow which is in general difficult to be reproduced numerically, owing to its unstable character: in particular, vorticity and turbulent kinetic energy fields, velocity, water depth and pressure spectra downstream of the jump, and velocity and pressure cross-correlations can be computed and analysed.

Prediction of beef carcass and meat quality traits from factors characterising the rearing management system applied during the whole life of heifers.

PubMed

Soulat, J; Picard, B; Léger, S; Monteils, V

2018-06-01

In this study, four prediction models were developed by logistic regression using individual data from 96 heifers. Carcass and sensory rectus abdominis quality clusters were identified then predicted using the rearing factors data. The obtained models from rearing factors applied during the fattening period were compared to those characterising the heifers' whole life. The highest prediction power of carcass and meat quality clusters were obtained from the models considering the whole life, with success rates of 62.8% and 54.9%, respectively. Rearing factors applied during both pre-weaning and fattening periods influenced carcass and meat quality. According to models, carcass traits were improved when heifer's mother was older for first calving, calves ingested concentrates during pasture preceding weaning and heifers were slaughtered older. Meat traits were improved by the genetic of heifers' parents (i.e., calving ease and early muscularity) and when heifers were slaughtered older. A management of carcass and meat quality traits is possible at different periods of the heifers' life. Copyright © 2018 Elsevier Ltd. All rights reserved.

Continuum and atomistic description of excess electrons in TiO2

NASA Astrophysics Data System (ADS)

Maggio, Emanuele; Martsinovich, Natalia; Troisi, Alessandro

2016-02-01

The modelling of an excess electron in a semiconductor in a prototypical dye sensitised solar cell is carried out using two complementary approaches: atomistic simulation of the TiO2 nanoparticle surface is complemented by a dielectric continuum model of the solvent-semiconductor interface. The two methods are employed to characterise the bound (excitonic) states formed by the interaction of the electron in the semiconductor with a positive charge opposite the interface. Density-functional theory (DFT) calculations show that the excess electron in TiO2 in the presence of a counterion is not fully localised but extends laterally over a large region, larger than system sizes accessible to DFT calculations. The numerical description of the excess electron at the semiconductor-electrolyte interface based on the continuum model shows that the exciton is also delocalised over a large area: the exciton radius can have values from tens to hundreds of Ångströms, depending on the nature of the semiconductor (characterised by the dielectric constant and the electron effective mass in our model).

Exploring multicollinearity using a random matrix theory approach.

PubMed

Feher, Kristen; Whelan, James; Müller, Samuel

2012-01-01

Clustering of gene expression data is often done with the latent aim of dimension reduction, by finding groups of genes that have a common response to potentially unknown stimuli. However, what is poorly understood to date is the behaviour of a low dimensional signal embedded in high dimensions. This paper introduces a multicollinear model which is based on random matrix theory results, and shows potential for the characterisation of a gene cluster's correlation matrix. This model projects a one dimensional signal into many dimensions and is based on the spiked covariance model, but rather characterises the behaviour of the corresponding correlation matrix. The eigenspectrum of the correlation matrix is empirically examined by simulation, under the addition of noise to the original signal. The simulation results are then used to propose a dimension estimation procedure of clusters from data. Moreover, the simulation results warn against considering pairwise correlations in isolation, as the model provides a mechanism whereby a pair of genes with `low' correlation may simply be due to the interaction of high dimension and noise. Instead, collective information about all the variables is given by the eigenspectrum.

Experimental and numerical investigation of the nonlinear dynamics of compliant mechanisms for deployable structures

NASA Astrophysics Data System (ADS)

Dewalque, Florence; Schwartz, Cédric; Denoël, Vincent; Croisier, Jean-Louis; Forthomme, Bénédicte; Brüls, Olivier

2018-02-01

This paper studies the dynamics of tape springs which are characterised by a highly geometrical nonlinear behaviour including buckling, the formation of folds and hysteresis. An experimental set-up is designed to capture these complex nonlinear phenomena. The experimental data are acquired by the means of a 3D motion analysis system combined with a synchronised force plate. Deployment tests show that the motion can be divided into three phases characterised by different types of folds, frequencies of oscillation and damping behaviours. Furthermore, the reproducibility quality of the dynamic and quasi-static results is validated by performing a large number of tests. In parallel, a nonlinear finite element model is developed. The required model parameters are identified based on simple experimental tests such as static deformed configurations and small amplitude vibration tests. In the end, the model proves to be well correlated with the experimental results in opposite sense bending, while in equal sense, both the experimental set-up and the numerical model are particularly sensitive to the initial conditions.

Selective methods for polyphenols and sulphur dioxide determination in wines.

PubMed

García-Guzmán, Juan J; Hernández-Artiga, María P; Palacios-Ponce de León, Lourdes; Bellido-Milla, Dolores

2015-09-01

A critical review to the methods recommended by international bodies and widely used in the winery industry and research studies was performed. A Laccase biosensor was applied to the selective determination of polyphenols in wines. The biosensor response was characterised and it responds mainly to o-diphenols which are the principal polyphenols responsible for the stability and sensory qualities of wines. The spectrophotometric method to determine free and total sulphur dioxide recommended for beers was applied directly to wines. A sampling of 14 red and white wines was performed and they were analysed for biosensor polyphenol index (IBP) and sulphur dioxide concentration (SO2). The antioxidant capacity by the ABTS(+) spectrophotometric method was also determined. A correlation study was performed to elucidate the influence of the polyphenols and SO2 on the wines stability. High correlations were found between IBP and antioxidant capacity and low correlation between SO2 and antioxidant capacity. To evaluate the benefits of wine drinking a new parameter (IBP/SO2) is proposed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Biomimetic routes to nanoscale-toughened oxide ceramics

NASA Astrophysics Data System (ADS)

Deschaume, Olivier

In this work, a novel anion exchange technique has been developed and optimised in order to prepare extra-pure, hydroxide-free solutions of aluminium polyoxocations (A113 and A130) as well as for the preparation of nanosized, highly monodisperse aluminium hydroxide particles in the particle size range 20-200nm. In order for the evolution and composition of the resulting systems to be monitored, an array of characterisation techniques including 27A1 NMR, dynamic light scattering, po-tentiometry, conductometry and UV-Vis spectroscopy, have been implemented and complemented with successful data treatment strategies. The quantitative data obtained indicates that the static anion exchange method is a soft, environmentally friendly, low-cost, energy-saving and convenient procedure for the preparation of Al- containing model systems. The A1 species obtained can be used for high-precision model studies on A1 speciation, and serve as nanosize precursors to a variety of Al-containing materials. The use of these pure A1 precursors has a clear advantage in materials synthesis arising from an improved understanding and better control of A1 speciation. In a second development of the project, the model systems have been used in a nanotectonic approach to biomimetic materials synthesis, with possible applications to the optimisation of Al-containing materials such as ceramics or composite films. Bearing this aim in mind, the interactions of the prepared aluminium species with the model protein BSA and a bioelastomer, elastin, were monitored and the resulting composite materials characterised. The methodology developed for the synthesis and characterisation of pure A1 species and A1 species/biomolecule systems is a robust base for further studies spanning research fields such as Chemistry, Biology or Environmental sciences, and possess a large potential for application to industrial products and processes.

The Feasibility of Avoiding Future Climate Impacts: Results from the AVOID Programmes

NASA Astrophysics Data System (ADS)

Lowe, J. A.; Warren, R.; Arnell, N.; Buckle, S.

2014-12-01

The AVOID programme and its successor, AVOID2, have focused on answering three core questions: how do we characterise potentially dangerous climate change and impacts, which emissions pathways can avoid at least some of these impacts, and how feasible are the future reductions needed to significantly deviate from a business-as-usual future emissions pathway. The first AVOID project succeeded in providing the UK Government with evidence to inform its position on climate change. A key part of the work involved developing a range of global emissions pathways and estimating and understanding the corresponding global impacts. This made use of a combination of complex general circulation models, simple climate models, pattern-scaling and state-of-the art impacts models. The results characterise the range of avoidable impacts across the globe in several key sectors including river and coastal flooding, cooling and heating energy demand, crop productivity and aspects of biodiversity. The avoided impacts between a scenario compatible with a 4ºC global warming and one with a 2ºC global warming were found to be highly sector dependent and avoided fractions typically ranged between 20% and 70%. A further key aspect was characterising the magnitude of the uncertainty involved, which is found to be very large in some impact sectors although the avoided fraction appears a more robust metric. The AVOID2 programme began in 2014 and will provide results in the run up to the Paris CoP in 2015. This includes new post-IPCC 5th assessment evidence to inform the long-term climate goal, a more comprehensive assessment of the uncertainty ranges of feasible emission pathways compatible with the long-term goal and enhanced estimates of global impacts using the latest generation of impact models and scenarios.

Leaching, geochemical modelling and field verification of a municipal solid waste and a predominantly non-degradable waste landfill.

PubMed

van der Sloot, H A; Kosson, D S; van Zomeren, A

2017-05-01

In spite of the known heterogeneity, wastes destined for landfilling can be characterised for their leaching behaviour by the same protocols as soil, contaminated soil, sediments, sludge, compost, wood, waste and construction products. Characterisation leaching tests used in conjunction with chemical speciation modelling results in much more detailed insights into release controlling processes and factors than single step batch leaching tests like TCLP (USEPA) and EN12457 (EU Landfill Directive). Characterisation testing also can provide the potential for mechanistic impact assessments by making use of a chemical speciation fingerprint (CSF) derived from pH dependence leaching test results. This CSF then forms the basis for subsequent chemical equilibrium and reactive transport modelling to assess environmental impact in a landfill scenario under relevant exposure conditions, including conditions not readily evaluated through direct laboratory testing. This approach has been applied to municipal solid waste (MSW) and predominantly non-degradable waste (PNW) that is representative of a significant part of waste currently being landfilled. This work has shown that a multi-element modelling approach provides a useful description of the release from each of these matrices because relevant release controlling properties and parameters (mineral dissolution/precipitation, sorption on Fe and Al oxides, clay interaction, interaction with dissolved and particulate organic carbon and incorporation in solid solutions) are taken into consideration. Inclusion of dissolved and particulate organic matter in the model is important to properly describe release of the low concentration trace constituents observed in the leachate. The CSF allows the prediction of release under different redox and degradation conditions in the landfill by modifying the redox status and level of dissolved and particulate organic matter in the model runs. The CSF for MSW provides a useful starting point for comparing leachate data from other MSW landfills. Copyright © 2016 Elsevier Ltd. All rights reserved.

Sub-metric Resolution FWI of Ultra-High-Frequency Marine Reflection Seismograms. A Remote Sensing Tool for the Characterisation of Shallow Marine Geohazard

NASA Astrophysics Data System (ADS)

Provenzano, G.; Vardy, M. E.; Henstock, T.; Zervos, A.

2017-12-01

A quantitative high-resolution physical model of the top 100 meters of the sub-seabed is of key importance for a wide range of shallow geohazard scenarios: identification of potential shallow landsliding, monitoring of gas storage sites, and assessment of offshore structures stability. Cur- rently, engineering-scale sediment characterisation relies heavily on direct sampling of the seabed and in-situ measurements. Such an approach is expensive and time-consuming, as well as liable to alter the sediment properties during the coring process. As opposed to reservoir-scale seismic exploration, ultra-high-frequency (UHF, 0.2-4.0 kHz) multi-channel marine reflection seismic data are most often limited to a to semi-quantitative interpretation of the reflection amplitudes and facies geometries, leaving largely unexploited its intrinsic value as a remote characterisation tool. In this work, we develop a seismic inversion methodology to obtain a robust sub-metric resolution elastic model from limited-offset, limited-bandwidth UHF seismic reflection data, with minimal pre-processing and limited a priori information. The Full Waveform Inversion is implemented as a stochastic optimiser based upon a Genetic Algorithm, modified in order to improve the robustness against inaccurate starting model populations. Multiple independent runs are used to create a robust posterior model distribution and quantify the uncertainties on the solution. The methodology has been applied to complex synthetic examples and to real datasets acquired in areas prone to shallow landsliding. The inverted elastic models show a satisfactory match with the ground-truths and a good sensitivity to relevant variations in the sediment texture and saturation state. We apply the methodology to a range of synthetic consolidating slopes under different loading conditions and sediment properties distributions. Our work demonstrates that the seismic inversion of UHF data has the potential to become an important practical tool for marine ground model building in spatially heterogeneous areas, reducing the reliance on expensive and time-consuming coring campaigns.

a New Framework for Characterising Simulated Droughts for Future Climates

NASA Astrophysics Data System (ADS)

Sharma, A.; Rashid, M.; Johnson, F.

2017-12-01

Significant attention has been focussed on metrics for quantifying drought. Lesser attention has been given to the unsuitability of current metrics in quantifying drought in a changing climate due to the clear non-stationarity in potential and actual evapotranspiration well into the future (Asadi-Zarch et al, 2015). This talk presents a new basis for simulating drought designed specifically for use with climate model simulations. Given the known uncertainty of climate model rainfall simulations, along with their inability to represent low-frequency variability attributes, the approach here adopts a predictive model for drought using selected atmospheric indicators. This model is based on a wavelet decomposition of relevant atmospheric predictors to filter out less relevant frequencies and formulate a better characterisation of the drought metric chosen as response. Once ascertained using observed precipication and associated atmospheric variables, these can be formulated from GCM simulations using a multivariate bias correction tool (Mehrotra and Sharma, 2016) that accounts for low-frequency variability, and a regression tool that accounts for nonlinear dependence (Sharma and Mehrotra, 2014). Use of only the relevant frequencies, as well as the corrected representation of cross-variable dependence, allows greater accuracy in characterising observed drought, from GCM simulations. Using simulations from a range of GCMs across Australia, we show here that this new method offers considerable advantages in representing drought compared to traditionally followed alternatives that rely on modelled rainfall instead. Reference:Asadi Zarch, M. A., B. Sivakumar, and A. Sharma (2015), Droughts in a warming climate: A global assessment of Standardized precipitation index (SPI) and Reconnaissance drought index (RDI), Journal of Hydrology, 526, 183-195. Mehrotra, R., and A. Sharma (2016), A Multivariate Quantile-Matching Bias Correction Approach with Auto- and Cross-Dependence across Multiple Time Scales: Implications for Downscaling, Journal of Climate, 29(10), 3519-3539. Sharma, A., and R. Mehrotra (2014), An information theoretic alternative to model a natural system using observational information alone, Water Resources Research, 50, 650-660, doi:10.1002/2013WR013845.

Probabilistic, sediment-geochemical parameterisation of the groundwater compartment of the Netherlands for spatially distributed, reactive transport modelling

NASA Astrophysics Data System (ADS)

Janssen, Gijs; Gunnink, Jan; van Vliet, Marielle; Goldberg, Tanya; Griffioen, Jasper

2017-04-01

Pollution of groundwater aquifers with contaminants as nitrate is a common problem. Reactive transport models are useful to predict the fate of such contaminants and to characterise the efficiency of mitigating or preventive measures. Parameterisation of a groundwater transport model on reaction capacity is a necessary step during building the model. Two Dutch, national programs are combined to establish a methodology for building a probabilistic model on reaction capacity of the groundwater compartment at the national scale: the Geological Survey program and the NHI Netherlands Hydrological Instrument program. Reaction capacity is considered as a series of geochemical characteristics that control acid/base condition, redox condition and sorption capacity. Five primary reaction capacity variables are characterised: 1. pyrite, 2. non-pyrite, reactive iron (oxides, siderite and glauconite), 3. clay fraction, 4. organic matter and 5. Ca-carbonate. Important reaction capacity variables that are determined by more than one solid compound are also deduced: 1. potential reduction capacity (PRC) by pyrite and organic matter, 2. cation-exchange capacity (CEC) by organic matter and clay content, 3. carbonate buffering upon pyrite oxidation (CPBO) by carbonate and pyrite. Statistical properties of these variables are established based on c. 16,000 sediment geochemical analyses. The first tens of meters are characterised based on 25 regions using combinations of lithological class and geological formation as strata. Because of both less data and more geochemical uniformity, the deeper subsurface is characterised in a similar way based on 3 regions. The statistical data is used as input in an algoritm that probabilistically calculates the reaction capacity per grid cell. First, the cumulative frequency distribution (cfd) functions are calculated from the statistical data for the geochemical strata. Second, all voxel cells are classified into the geochemical strata. Third, the cfd functions are used to put random reaction capacity variables into the hydrological voxel model. Here, the distribution can be conditioned on two variables. Two important variables are clay content and depth. The first is valid because more dense data is available for clay content than for geochemical variables as pyrite and probabilistic, lithological models are also built at TNO Geological Survey. The second is important to account for locally different depths at which the redox cline between NO3-rich and Fe(II)-rich groundwater occurs within the first tens of meters of the subsurface. An extensive data-set of groundwater quality analyses is used to derive criteria for depth variability of the redox cline. The result is a unique algoritm in order to obtain heterogeneous geochemical reaction capacity models of the entire groundwater compartment of the Netherlands.

A hypothetical model for predicting the toxicity of high aspect ratio nanoparticles (HARN)

NASA Astrophysics Data System (ADS)

Tran, C. L.; Tantra, R.; Donaldson, K.; Stone, V.; Hankin, S. M.; Ross, B.; Aitken, R. J.; Jones, A. D.

2011-12-01

The ability to predict nanoparticle (dimensional structures which are less than 100 nm in size) toxicity through the use of a suitable model is an important goal if nanoparticles are to be regulated in terms of exposures and toxicological effects. Recently, a model to predict toxicity of nanoparticles with high aspect ratio has been put forward by a consortium of scientists. The High aspect ratio nanoparticles (HARN) model is a platform that relates the physical dimensions of HARN (specifically length and diameter ratio) and biopersistence to their toxicity in biological environments. Potentially, this model is of great public health and economic importance, as it can be used as a tool to not only predict toxicological activity but can be used to classify the toxicity of various fibrous nanoparticles, without the need to carry out time-consuming and expensive toxicology studies. However, this model of toxicity is currently hypothetical in nature and is based solely on drawing similarities in its dimensional geometry with that of asbestos and synthetic vitreous fibres. The aim of this review is two-fold: (a) to present findings from past literature, on the physicochemical property and pathogenicity bioassay testing of HARN (b) to identify some of the challenges and future research steps crucial before the HARN model can be accepted as a predictive model. By presenting what has been done, we are able to identify scientific challenges and research directions that are needed for the HARN model to gain public acceptance. Our recommendations for future research includes the need to: (a) accurately link physicochemical data with corresponding pathogenicity assay data, through the use of suitable reference standards and standardised protocols, (b) develop better tools/techniques for physicochemical characterisation, (c) to develop better ways of monitoring HARN in the workplace, (d) to reliably measure dose exposure levels, in order to support future epidemiological studies.

Global ozone and air quality: a multi-model assessment of risks to human health and crops

NASA Astrophysics Data System (ADS)

Ellingsen, K.; Gauss, M.; van Dingenen, R.; Dentener, F. J.; Emberson, L.; Fiore, A. M.; Schultz, M. G.; Stevenson, D. S.; Ashmore, M. R.; Atherton, C. S.; Bergmann, D. J.; Bey, I.; Butler, T.; Drevet, J.; Eskes, H.; Hauglustaine, D. A.; Isaksen, I. S. A.; Horowitz, L. W.; Krol, M.; Lamarque, J. F.; Lawrence, M. G.; van Noije, T.; Pyle, J.; Rast, S.; Rodriguez, J.; Savage, N.; Strahan, S.; Sudo, K.; Szopa, S.; Wild, O.

2008-02-01

Within ACCENT, a European Network of Excellence, eighteen atmospheric models from the U.S., Europe, and Japan calculated present (2000) and future (2030) concentrations of ozone at the Earth's surface with hourly temporal resolution. Comparison of model results with surface ozone measurements in 14 world regions indicates that levels and seasonality of surface ozone in North America and Europe are characterized well by global models, with annual average biases typically within 5-10 nmol/mol. However, comparison with rather sparse observations over some regions suggest that most models overestimate annual ozone by 15-20 nmol/mol in some locations. Two scenarios from the International Institute for Applied Systems Analysis (IIASA) and one from the Intergovernmental Panel on Climate Change Special Report on Emissions Scenarios (IPCC SRES) have been implemented in the models. This study focuses on changes in near-surface ozone and their effects on human health and vegetation. Different indices and air quality standards are used to characterise air quality. We show that often the calculated changes in the different indices are closely inter-related. Indices using lower thresholds are more consistent between the models, and are recommended for global model analysis. Our analysis indicates that currently about two-thirds of the regions considered do not meet health air quality standards, whereas only 2-4 regions remain below the threshold. Calculated air quality exceedances show moderate deterioration by 2030 if current emissions legislation is followed and slight improvements if current emissions reduction technology is used optimally. For the "business as usual" scenario severe air quality problems are predicted. We show that model simulations of air quality indices are particularly sensitive to how well ozone is represented, and improved accuracy is needed for future projections. Additional measurements are needed to allow a more quantitative assessment of the risks to human health and vegetation from changing levels of surface ozone.

Models of Academic Governance during a Period of Nation-Building: The Hebrew University in the 1920s-1960s

ERIC Educational Resources Information Center

Cohen, Uri; Sapir, Adi

2016-01-01

This paper explores the development of the structures of university governance at the Hebrew University of Jerusalem between the 1920s and 1960s. The model that ultimately prevailed, a "state-sponsored model" of governance, dominated the higher education system in Israel until the early 2000s and was characterised by the dominance of…

Sex differences in macronutrient intake and adherence to dietary recommendations: findings from the UK Biobank.

PubMed

Bennett, Elizabeth; Peters, Sanne A E; Woodward, Mark

2018-04-24

To characterise sex differences in macronutrient intakes and adherence to dietary recommendations in the UK Biobank population. Cross-sectional population-based study. UK Biobank Resource. 210 106 (52.5% women) individuals with data on dietary behaviour. Women-to-men mean differences in nutrient intake in grams and as a percentage of energy and women-to-men ORs in non-adherence, adjusting for age, socioeconomic status and ethnicity. There were sex differences in energy intake and distribution. Men had greater intakes of energy and were less likely to have energy intakes above the estimated average requirement compared with women. Small, but significant, sex differences were found in the intakes of all macronutrients. For all macronutrients, men had greater absolute intakes while women had greater intakes as a percentage of energy. Women were more likely to have intakes that exceeded recommendations for total fat, saturated fat and total sugar. Men were less likely to achieve the minimum recommended intakes for protein, polyunsaturated fat and total carbohydrate. Over 95% of men and women were non-adherent to fibre recommendations. Sex differences in dietary intakes were moderated by age and to some extent by socioeconomic status. There are significant sex differences in adherence to dietary recommendations, particularly for sugar. However, given the increased focus on food groups and dietary patterns for nutritional policy, these differences alone may not be sufficient for policy and health promotion. Future studies that are able to explore the sex differences in intakes of different food groups that are risk factors for diet-related diseases are warranted to improve the current understanding of the differential impact of diet on health in women and men. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Classification of instability modes in a model of aluminium reduction cells with a uniform magnetic field

NASA Astrophysics Data System (ADS)

Molokov, Sergei; El, Gennady; Lukyanov, Alexander

2011-10-01

A unified view on the interfacial instability in a model of aluminium reduction cells in the presence of a uniform, vertical, background magnetic field is presented. The classification of instability modes is based on the asymptotic theory for high values of parameter β, which characterises the ratio of the Lorentz force based on the disturbance current, and gravity. It is shown that the spectrum of the travelling waves consists of two parts independent of the horizontal cross-section of the cell: highly unstable wall modes and stable or weakly unstable centre, or Sele's modes. The wall modes with the disturbance of the interface being localised at the sidewalls of the cell dominate the dynamics of instability. Sele's modes are characterised by a distributed disturbance over the whole horizontal extent of the cell. As β increases these modes are stabilized by the field.

Characterising RNA secondary structure space using information entropy

PubMed Central

2013-01-01

Comparative methods for RNA secondary structure prediction use evolutionary information from RNA alignments to increase prediction accuracy. The model is often described in terms of stochastic context-free grammars (SCFGs), which generate a probability distribution over secondary structures. It is, however, unclear how this probability distribution changes as a function of the input alignment. As prediction programs typically only return a single secondary structure, better characterisation of the underlying probability space of RNA secondary structures is of great interest. In this work, we show how to efficiently compute the information entropy of the probability distribution over RNA secondary structures produced for RNA alignments by a phylo-SCFG, and implement it for the PPfold model. We also discuss interpretations and applications of this quantity, including how it can clarify reasons for low prediction reliability scores. PPfold and its source code are available from http://birc.au.dk/software/ppfold/. PMID:23368905

A chemometric approach to the characterisation of historical mortars

DOE Office of Scientific and Technical Information (OSTI.GOV)

Rampazzi, L.; Pozzi, A.; Sansonetti, A.

2006-06-15

The compositional knowledge of historical mortars is of great concern in case of provenance and dating investigations and of conservation works since the nature of the raw materials suggests the most compatible conservation products. The classic characterisation usually goes through various analytical determinations, while conservation laboratories call for simple and quick analyses able to enlighten the nature of mortars, usually in terms of the binder fraction. A chemometric approach to the matter is here undertaken. Specimens of mortars were prepared with calcitic and dolomitic binders and analysed by Atomic Spectroscopy. Principal Components Analysis (PCA) was used to investigate the featuresmore » of specimens and samples. A Partial Least Square (PLS1) regression was done in order to predict the binder/aggregate ratio. The model was applied to historical mortars from the churches of St. Lorenzo (Milan) and St. Abbondio (Como). The accordance between the predictive model and the real samples is discussed.« less

Mandatory implementation of NICE Guidelines for the care of bipolar disorder and other conditions in England and Wales.

PubMed

Morriss, Richard

2015-09-30

Bipolar disorder is a common long-term mental health condition characterised by episodes of mania or hypomania and depression resulting in disability, early death, and high health and society costs. Public money funds the National Institute of Healthcare and Clinical Excellence (NICE) to produce clinical guidelines by systematically identifying the most up to date research evidence and costing its main recommendations for healthcare organisations and professionals to follow in England and Wales. Most governments, including those of England and Wales, need to improve healthcare but at reduced cost. There is evidence, particularly in bipolar disorder, that systematically following clinical guidelines achieves these outcomes. NICE clinical guidelines, including those regarding bipolar disorder, remain variably implemented. They give clinicians and patients a non-prescriptive basis for deciding their care. Despite the passing of the Health and Social Care Act in 2012 in England requiring all healthcare organisations to consider NICE clinical guidelines in commissioning, delivering, and inspecting healthcare services, healthcare organisations in the National Health Service may ignore them with little accountability and few consequences. There is no mechanism to ensure that healthcare professionals know or consider them. Barriers to their implementation include the lack of political and professional leadership, the complexity of the organisation of care and policy, mistrust of some processes and recommendations of clinical guidelines, and a lack of a clear implementation model, strategy, responsibility, or accountability. Mitigation to these barriers is presented herein. The variability, safety, and quality of healthcare might be improved and its cost reduced if the implementation of NICE clinical guidelines, such as those for bipolar disorder, were made the minimum starting point for clinical decision-making and mandatory responsibilities of all healthcare organisations and professionals.

Spatial and temporal analyses for multiscale monitoring of landslides: Examples from Northern Ireland

NASA Astrophysics Data System (ADS)

Bell, Andrew; McKinley, Jennifer; Hughes, David

2013-04-01

Landslides in the form of debris flows, large scale rotational features and composite mudflows impact transport corridors cutting off local communities and in some instances result in loss of life. This study presents landslide monitoring methods used for predicting and characterising landslide activity along transport corridors. A variety of approaches are discussed: desk based risk assessment of slopes using Geographical Information Systems (GIS); Aerial LiDAR surveys and Terrestrial LiDAR monitoring and field instrumentation of selected sites. A GIS based case study is discussed which provides risk assessment for the potential of slope stability issues. Layers incorporated within the system include Digital Elevation Model (DEM), slope, aspect, solid and drift geology and groundwater conditions. Additional datasets include consequence of failure. These are combined within a risk model, presented as likelihoods of failure. This integrated spatial approach for slope risk assessment provides the user with a preliminary risk assessment of sites. An innovative "Flexviewer" web-based server interface allows users to view data without needing advanced GIS techniques to gather information about selected areas. On a macro landscape scale, Aerial LiDAR (ALS) surveys are used for the characterisation of landslides from the surrounding terrain. DEMs are generated along with terrain derivatives: slope, curvature and various measures of terrain roughness. Spatial analysis of terrain morphological parameters allow characterisation of slope stability issues and are used to predict areas of potential failure or recently failure terrain. On a local scale ground monitoring approaches are employed for the monitoring of changes in selected slopes using ALS and risk assessment approaches. Results are shown from on-going bimonthly Terrestrial LiDAR (TLS) monitoring of the slope within a site specific geodectically referenced network. This has allowed a classification of changes in the slopes with DEMs of difference showing areas of recent movement, erosion and deposition. In addition, changes in the structure of the slope characterised by DEM of difference and morphological parameters in the form of roughness, slope and curvature measures are progressively linked to failures indicated from temporal DEM monitoring. Preliminary results are presented for a case site at Straidkilly Point, Glenarm, Co. Antrim, Northern Ireland, illustrating multiple approaches to the spatial and temporal monitoring of landslides. These indicate how spatial morphological approaches and risk assessment frameworks coupled with TLS monitoring and field instrumentation enable characterisation and prediction of potential areas of slope stability issues. On site weather instrumentation and piezometers document changes in pore water pressures resulting in site-specific information with geotechnical observations parameterised within the temporal LiDAR monitoring. This provides a multifaceted approach to the characterisation and analysis of slope stability issues. The presented methodology of multiscale datasets and surveying approaches utilising spatial parameters and risk index mapping enables a more comprehensive and effective prediction of landslides resulting in effective characterisation and remediation strategies.

Uncertainty quantification of fast sodium current steady-state inactivation for multi-scale models of cardiac electrophysiology.

PubMed

Pathmanathan, Pras; Shotwell, Matthew S; Gavaghan, David J; Cordeiro, Jonathan M; Gray, Richard A

2015-01-01

Perhaps the most mature area of multi-scale systems biology is the modelling of the heart. Current models are grounded in over fifty years of research in the development of biophysically detailed models of the electrophysiology (EP) of cardiac cells, but one aspect which is inadequately addressed is the incorporation of uncertainty and physiological variability. Uncertainty quantification (UQ) is the identification and characterisation of the uncertainty in model parameters derived from experimental data, and the computation of the resultant uncertainty in model outputs. It is a necessary tool for establishing the credibility of computational models, and will likely be expected of EP models for future safety-critical clinical applications. The focus of this paper is formal UQ of one major sub-component of cardiac EP models, the steady-state inactivation of the fast sodium current, INa. To better capture average behaviour and quantify variability across cells, we have applied for the first time an 'individual-based' statistical methodology to assess voltage clamp data. Advantages of this approach over a more traditional 'population-averaged' approach are highlighted. The method was used to characterise variability amongst cells isolated from canine epi and endocardium, and this variability was then 'propagated forward' through a canine model to determine the resultant uncertainty in model predictions at different scales, such as of upstroke velocity and spiral wave dynamics. Statistically significant differences between epi and endocardial cells (greater half-inactivation and less steep slope of steady state inactivation curve for endo) was observed, and the forward propagation revealed a lack of robustness of the model to underlying variability, but also surprising robustness to variability at the tissue scale. Overall, the methodology can be used to: (i) better analyse voltage clamp data; (ii) characterise underlying population variability; (iii) investigate consequences of variability; and (iv) improve the ability to validate a model. To our knowledge this article is the first to quantify population variability in membrane dynamics in this manner, and the first to perform formal UQ for a component of a cardiac model. The approach is likely to find much wider applicability across systems biology as current application domains reach greater levels of maturity. Published by Elsevier Ltd.

Five challenges for spatial epidemic models.

PubMed

Riley, Steven; Eames, Ken; Isham, Valerie; Mollison, Denis; Trapman, Pieter

2015-03-01

Infectious disease incidence data are increasingly available at the level of the individual and include high-resolution spatial components. Therefore, we are now better able to challenge models that explicitly represent space. Here, we consider five topics within spatial disease dynamics: the construction of network models; characterising threshold behaviour; modelling long-distance interactions; the appropriate scale for interventions; and the representation of population heterogeneity. Copyright © 2014 The Authors. Published by Elsevier B.V. All rights reserved.

Modelling and Characterisation of Detection Models in WAMI for Handling Negative Information

DTIC Science & Technology

2014-02-01

behaviour of the multi-stage detectors used in LoFT. This model is then used in a Probabilistic Hypothesis Density Filter (PHD). Unlike most multitarget...Therefore, we decided to use machine learning techniques which could model — and pre- dict — the behaviour of the detectors in LoFT. Because we are using...on feature detectors [8], motion models [13] and descriptor and template adaptation [9]. 2.3.2 State Model The state space of LoFT is defined in 2D

An MLE method for finding LKB NTCP model parameters using Monte Carlo uncertainty estimates

NASA Astrophysics Data System (ADS)

Carolan, Martin; Oborn, Brad; Foo, Kerwyn; Haworth, Annette; Gulliford, Sarah; Ebert, Martin

2014-03-01

The aims of this work were to establish a program to fit NTCP models to clinical data with multiple toxicity endpoints, to test the method using a realistic test dataset, to compare three methods for estimating confidence intervals for the fitted parameters and to characterise the speed and performance of the program.

How Can the Relationship between Argumentation and Proof Be Analysed?

ERIC Educational Resources Information Center

Pedemonte, Bettina

2007-01-01

The paper presents a characterisation about argumentation and proof in mathematics. On the basis of contemporary linguistic theories, the hypothesis that proof is a special case of argumentation is put forward and Toulmin's model is proposed as a methodological tool to compare them. This model can be used to detect and analyse the structure of an…

Pathways to Co-Impact: Action Research and Community Organising

ERIC Educational Resources Information Center

Banks, Sarah; Herrington, Tracey; Carter, Kath

2017-01-01

This article introduces the concept of "co-impact" to characterise the complex and dynamic process of social and economic change generated by participatory action research (PAR). It argues that dominant models of research impact tend to see it as a linear process, based on a donor-recipient model, occurring at the end of a project…

The Regional Network for Asian Schistosomiasis and Other Helminth Zoonoses (RNAS(+)) target diseases in face of climate change.

PubMed

Yang, Guo-Jing; Utzinger, Jürg; Lv, Shan; Qian, Ying-Jun; Li, Shi-Zhu; Wang, Qiang; Bergquist, Robert; Vounatsou, Penelope; Li, Wei; Yang, Kun; Zhou, Xiao-Nong

2010-01-01

Climate change-according to conventional wisdom-will result in an expansion of tropical parasitic diseases in terms of latitude and altitude, with vector-borne diseases particularly prone to change. However, although a significant rise in temperature occurred over the past century, there is little empirical evidence whether climate change has indeed favoured infectious diseases. This might be explained by the complex relationship between climate change and the frequency and the transmission dynamics of infectious diseases, which is characterised by nonlinear associations and countless other complex factors governing the distribution of infectious diseases. Here, we explore whether and how climate change might impact on diseases targeted by the Regional Network for Asian Schistosomiasis and Other Helminth Zoonoses (RNAS(+)). We start our review with a short summary of the current evidence-base how climate change affects the distribution of infectious diseases. Next, we introduce biology-based models for predicting the distribution of infectious diseases in a future, warmer world. Two case studies are presented: the classical RNAS(+) disease schistosomiasis and an emerging disease, angiostrongyliasis, focussing on their occurrences in the People's Republic of China. Strengths and limitations of current models for predicting the impact of climate change on infectious diseases are discussed, and we propose model extensions to include social and ecological factors. Finally, we recommend that mitigation and adaptation strategies to diminish potential negative effects of climate change need to be developed in concert with key stakeholders so that surveillance and early-warning systems can be strengthened and the most vulnerable population groups protected. Copyright 2010 Elsevier Ltd. All rights reserved.

Experimental and simulation characterisation of flexural vibration modes in unimorph ultrasound transducers.

PubMed

Eriksson, T J R; Ramadas, S N; Dixon, S M

2016-02-01

A unimorph flexural transducer design is proposed and tested with regard to mode shapes and frequencies. The transducers consist of a passive metal cap structure, and a thin piezoelectric disc, rigidly bonded to the inside. Extensive finite element (FE) modelling, and experimental 2D, time-resolved displacement measurements were done to characterise the transducers flexural properties, and to compare them to the analytical solutions of thin vibrating plates. Emphasis was put on characterising the passive layer of the unimorph structure, before bonding the piezoelectric element, to understand how the active element affects the behaviour of the flexing plate. A high power Nd:YAG laser was used to actuate the metal plate (non-contact), and the frequency content of the resulting displacement signal was analysed to identify the flexural modes. The non-axisymmetric modes, which are conventionally disregarded because of their unfavourable acoustic properties, were also taken into account. There was excellent agreement between the experimental results and the FE simulation data. There was good agreement with the analytical edge clamped plate model, but with some notable deviations, which have not previously been identified or commented upon. Specifically, the second axisymmetric mode is split into three separate modes, which is not explained by the traditional theory of vibrating plates. Crown Copyright © 2015. Published by Elsevier B.V. All rights reserved.

Characterising the spatial variability of the tidal stream energy resource from floating turbines

NASA Astrophysics Data System (ADS)

Ward, Sophie; Neill, Simon; Robins, Peter

2017-04-01

The shelf seas, in particular the northwest European shelf seas surrounding the UK, contain significant tidal power potential. Tidal stream energy is both predictable and reliable providing that sites are well-selected based upon the hydrodynamic regime and the device specifics. In this high resolution three-dimensional tidal modelling study, we investigate how the tidal stream resource around the Welsh coast (UK) varies with water depth and location, with particular focus on the Pembrokeshire region. The potential extractable energy for a floating tidal stream energy converter is compared with that for a bottom-fixed device, highlighting the need to vary the resource characterisation criteria based on device specifics. We demonstrate how small variations in the tidal current speeds - with hub depth or due to tidal asymmetry - can lead to substantial variations in potential power output. Further, the results indicate that power generation from floating tidal energy converters will be more significantly influenced by tidal elevations in regions characterised by a lower tidal range (more progressive waves) than regions that experience a high tidal range (standing waves). As numerical modelling capacity improves and tidal stream energy converter technologies develop, ongoing improved quantification of the tidal resource is needed, as well as consideration of the possible feedbacks of the devices and energy extraction on the hydrodynamic regime and the surrounding area.

Electrically induced microflows probed by fluorescence correlation spectroscopy.

PubMed

Ybert, C; Nadal, F; Salomé, R; Argoul, F; Bourdieu, L

2005-03-01

We report on the experimental characterisation of electrically induced flows at the micrometer scale through Fluorescence Correlation Spectroscopy (FCS) measurements. We stress the potential of FCS as a useful characterisation technique in microfluidics devices for transport properties cartography. The experimental results obtained in a model situation are in agreement with previous calculations (F. Nadal, F. Argoul, P. Kestener, B. Pouligny, C. Ybert, A. Ajdari, Eur. Phys. J. E 9, 387 (2002)) predicting the structure and electric-field dependency of the induced flow. Additionally, the present study evidences a complex behaviour of the probe nanobeads under electric field whose precise understanding might prove relevant for situations where nano-objects interact with an external electric field.

Analysis of a Physics Teacher's Pedagogical "Micro-Actions" That Support 17-Year-Olds' Learning of Free Body Diagrams via a Modelling Approach

ERIC Educational Resources Information Center

Tay, Su Lynn; Yeo, Jennifer

2018-01-01

Great teaching is characterised by the specific actions a teacher takes in the classroom to bring about learning. In the context of model-based teaching (MBT), teachers' difficulty in working with students' models that are not scientifically consistent is troubling. To address this problem, the aim of this study is to identify the pedagogical…

Inter-speaker speech variability assessment using statistical deformable models from 3.0 tesla magnetic resonance images.

PubMed

Vasconcelos, Maria J M; Ventura, Sandra M R; Freitas, Diamantino R S; Tavares, João Manuel R S

2012-03-01

The morphological and dynamic characterisation of the vocal tract during speech production has been gaining greater attention due to the motivation of the latest improvements in magnetic resonance (MR) imaging; namely, with the use of higher magnetic fields, such as 3.0 Tesla. In this work, the automatic study of the vocal tract from 3.0 Tesla MR images was assessed through the application of statistical deformable models. Therefore, the primary goal focused on the analysis of the shape of the vocal tract during the articulation of European Portuguese sounds, followed by the evaluation of the results concerning the automatic segmentation, i.e. identification of the vocal tract in new MR images. In what concerns speech production, this is the first attempt to automatically characterise and reconstruct the vocal tract shape of 3.0 Tesla MR images by using deformable models; particularly, by using active and appearance shape models. The achieved results clearly evidence the adequacy and advantage of the automatic analysis of the 3.0 Tesla MR images of these deformable models in order to extract the vocal tract shape and assess the involved articulatory movements. These achievements are mostly required, for example, for a better knowledge of speech production, mainly of patients suffering from articulatory disorders, and to build enhanced speech synthesizer models.

Recent advancements in mechanical characterisation of 3D woven composites

NASA Astrophysics Data System (ADS)

Saleh, Mohamed Nasr; Soutis, Constantinos

2017-12-01

Three dimensional (3D) woven composites have attracted the interest of academia and industry thanks to their damage tolerance characteristics and automated fabric manufacturing. Although much research has been conducted to investigate their out-of-plane "through thickness" properties, still their in-plane properties are not fully understood and rely on extensive experimentation. To date, the literature lacks an inclusive summary of the mechanical characterisation for 3D woven composites. Therefore, the objective of this paper is to provide a comprehensive review of the available research studies on 3D woven composites mechanical characterisation, with less emphasis on the out-of-plane response, but an in-depth review of the in-plane response "un-notched vs. notched". The paper highlights the knowledge gap in the literature of 3D woven composites, suggesting opportunities for future research in this field and a room for improvement in utilising Non-Destructive Techniques (NDT), such as Digital Image Correlation (DIC), Acoustic Emission (AE) and X-ray Computed Tomography (CT), for observing damage initiation and evolution in 3D woven composites that could be used to calibrate and evaluate analytical and numerical models.

Integration of immunological aspects in the European Human Embryonic Stem Cell Registry.

PubMed

Borstlap, Joeri; Kurtz, Andreas

2008-05-01

The immunological properties of stem cells are of increasing importance in regenerative medicine. Immunomodulatory mechanisms seem to play an important role not only with respect to the understanding of underlying mechanisms of autologous versus allogenic therapeutic approaches, but also for endogeneous tissue regeneration. The newly established European human embryonic stem cell registry (hESCreg) offers an international database for the registration, documentation and characterisation of human embryonic stem cells (hESC) and their use. By doing so, hESCreg aims to develop a model procedure for further standardisation efforts in the field of stem cell research and regenerative medicine, and eventually the registry may lead to a repository of therapy-related information. Currently the stem cell characterisation data acquired by the registry are divided into several categories such as cell derivation, culture conditions, genetic constitution, stem cell marker expression and degree of modification. This article describes immunological aspects of stem cell characterisation and explores the layout and relevance of a possible additional section to the hESCreg repository to include immunological characteristics of human embryonic stem cells.

Wastewater treatment plants as a pathway for microplastics: Development of a new approach to sample wastewater-based microplastics.

PubMed

Ziajahromi, Shima; Neale, Peta A; Rintoul, Llew; Leusch, Frederic D L

2017-04-01

Wastewater effluent is expected to be a pathway for microplastics to enter the aquatic environment, with microbeads from cosmetic products and polymer fibres from clothes likely to enter wastewater treatment plants (WWTP). To date, few studies have quantified microplastics in wastewater. Moreover, the lack of a standardized and applicable method to identify microplastics in complex samples, such as wastewater, has limited the accurate assessment of microplastics and may lead to an incorrect estimation. This study aimed to develop a validated method to sample and process microplastics from wastewater effluent and to apply the developed method to quantify and characterise wastewater-based microplastics in effluent from three WWTPs that use primary, secondary and tertiary treatment processes. We applied a high-volume sampling device that fractionated microplastics in situ and an efficient sample processing procedure to improve the sampling of microplastics in wastewater and to minimize the false detection of non-plastic particles. The sampling device captured between 92% and 99% of polystyrene microplastics using 25 μm-500 μm mesh screens in laboratory tests. Microplastic type, size and suspected origin in all studied WWTPs, along with the removal efficiency during the secondary and tertiary treatment stages, was investigated. Suspected microplastics were characterised using Fourier Transform Infrared spectroscopy, with between 22 and 90% of the suspected microplastics found to be non-plastic particles. An average of 0.28, 0.48 and 1.54 microplastics per litre of final effluent was found in tertiary, secondary and primary treated effluent, respectively. This study suggests that although low concentrations of microplastics are detected in wastewater effluent, WWTPs still have the potential to act as a pathway to release microplastics given the large volumes of effluent discharged to the aquatic environment. This study focused on a single sampling campaign, with long-term monitoring recommended to further characterise microplastics in wastewater. Copyright © 2017 Elsevier Ltd. All rights reserved.

Wind tunnel measurements for dispersion modelling of vehicle wakes

NASA Astrophysics Data System (ADS)

Carpentieri, Matteo; Kumar, Prashant; Robins, Alan

2012-12-01

Wind tunnel measurements downwind of reduced scale car models have been made to study the wake regions in detail, test the usefulness of existing vehicle wake models, and draw key information needed for dispersion modelling in vehicle wakes. The experiments simulated a car moving in still air. This is achieved by (i) the experimental characterisation of the flow, turbulence and concentration fields in both the near and far wake regions, (ii) the preliminary assessment of existing wake models using the experimental database, and (iii) the comparison of previous field measurements in the wake of a real diesel car with the wind tunnel measurements. The experiments highlighted very large gradients of velocities and concentrations existing, in particular, in the near-wake. Of course, the measured fields are strongly dependent on the geometry of the modelled vehicle and a generalisation for other vehicles may prove to be difficult. The methodology applied in the present study, although improvable, could constitute a first step towards the development of mathematical parameterisations. Experimental results were also compared with the estimates from two wake models. It was found that they can adequately describe the far-wake of a vehicle in terms of velocities, but a better characterisation in terms of turbulence and pollutant dispersion is needed. Parameterised models able to predict velocity and concentrations with fine enough details at the near-wake scale do not exist.

Whip Rule Breaches in a Major Australian Racing Jurisdiction: Welfare and Regulatory Implications

PubMed Central

Hood, Jennifer; McDonald, Carolyn; Wilson, Bethany; McManus, Phil; McGreevy, Paul

2017-01-01

Simple Summary An evidence-based analysis of whip rule breaches in horse racing is needed to address community expectations that racehorses are treated humanely. The study provides the first peer-reviewed characterisation of whip rule breaches and their regulatory outcomes in horseracing, and considers the relationship between rules affecting racing integrity and the welfare of racehorses in a major Australian racing jurisdiction. Abstract Whip use in horseracing is increasingly being questioned on ethical, animal welfare, social sustainability, and legal grounds. Despite this, there is weak evidence for whip use and its regulation by Stewards in Australia. To help address this, we characterised whip rule breaches recorded by Stewards using Stewards Reports and Race Diaries from 2013 and 2016 in New South Wales (NSW) and the Australian Capital Territory (ACT). There were more recorded breaches at Metropolitan (M) than Country (C) or Provincial (P) locations, and by riders of horses that finished first, second, or third than by riders of horses that finished in other positions. The most commonly recorded breaches were forehand whip use on more than five occasions before the 100-metre (m) mark (44%), and whip use that raises the jockey’s arm above shoulder height (24%). It is recommended that racing compliance data be analysed annually to inform the evidence-base for policy, education, and regulatory change, and ensure the welfare of racehorses and racing integrity. PMID:28275207

Variability and Reliabiltiy in Axon Growth Cone Navigation Decision Making

NASA Astrophysics Data System (ADS)

Garnelo, Marta; Ricoult, Sébastien G.; Juncker, David; Kennedy, Timothy E.; Faisal, Aldo A.

2015-03-01

The nervous system's wiring is a result of axon growth cones navigating through specific molecular environments during development. In order to reach their target, growth cones need to make decisions under uncertainty as they are faced with stochastic sensory information and probabilistic movements. The overall system therefore exhibits features of whole organisms (perception, decision making, action) in the subset of a single cell. We aim to characterise growth cone navigation in defined nano-dot guidance cue environments, by using the tools of computational neuroscience to conduct ``molecular psychophysics.'' We start with a generative model of growth cone behaviour and we 1. characterise sensory and internal sources of noise contributing to behavioural variables, by combining knowledge of the underlying stochastic dynamics in cue sensing and the growth of the cytoskeleton. This enables us to 2. produce bottom-up lower limit estimates of behavioural response reliability and visualise it as probability distributions over axon growth trajectories. Given this information we can match our in silico model's ``psychometric'' decision curves with empirical data. Finally we use a Monte-Carlo approach to predict response distributions of axon trajectories from our model.

Three-dimensional characterisation and simulation of deformation and damage during Taylor impact in PTFE

NASA Astrophysics Data System (ADS)

Resnyansky, A. D.; McDonald, S. A.; Withers, P. J.; Bourne, N. K.; Millett, J. C. F.; Brown, E. N.; Rae, P. J.

2014-05-01

The current work presents Taylor impact experiments interrogating the effect of dynamic, high-pressure loading on polytetrafluoroethylene (PTFE). In particular, X-ray microtomography has been used to characterise the damage imparted to cylindrical samples due to impact at different velocities. Distinct regions of deformation are present and controlled by fracture within the polymer, with the extent of the deformed region and increasing propagation of fractures from the impact face showing a clear trend with increasing impact velocity. A two-phase rate sensitive strength model is implemented in the CTH hydrocode and used for simulation of the problem. The high-pressure phase transition of PTFE into Phase III within the crystalline domains from the polymer at normal conditions is managed by suitable phase transition kinetics within the model. The experimental observations are discussed with respect to the multi-phase model hydrocode predictions of the shock response from Taylor impact simulations. The damage and its progress are shown to correlate well with the onset of the phase transition and its evolution following the impact velocity increase.

Time delays, population, and economic development

NASA Astrophysics Data System (ADS)

Gori, Luca; Guerrini, Luca; Sodini, Mauro

2018-05-01

This research develops an augmented Solow model with population dynamics and time delays. The model produces either a single stationary state or multiple stationary states (able to characterise different development regimes). The existence of time delays may cause persistent fluctuations in both economic and demographic variables. In addition, the work identifies in a simple way the reasons why economics affects demographics and vice versa.

Educational Leadership as Best Practice in Highly Effective Schools in the Autonomous Region of the Basque County (Spain)

ERIC Educational Resources Information Center

Intxausti, Nahia; Joaristi, Luis; Lizasoain, Luis

2016-01-01

This study presents part of a research project currently underway which aims to characterise the best practices of highly effective schools in the Autonomous Region of the Basque Country (Spain). Multilevel statistical modelling and hierarchical linear models were used to select 32 highly effective schools, with highly effective being taken to…

Characterisation of Cdkl5 transcript isoforms in rat.

PubMed

Hector, Ralph D; Dando, Owen; Ritakari, Tuula E; Kind, Peter C; Bailey, Mark E S; Cobb, Stuart R

2017-03-01

CDKL5 deficiency is a severe neurological disorder caused by mutations in the X-linked Cyclin-Dependent Kinase-Like 5 gene (CDKL5). The predominant human CDKL5 brain isoform is a 9.7kb transcript comprised of 18 exons with a large 6.6kb 3'-untranslated region (UTR). Mammalian models of CDKL5 disorder are currently limited to mouse, and little is known about Cdkl5 in other organisms used to model neurodevelopmental disorders, such as rat. In this study we characterise, both bioinformatically and experimentally, the rat Cdkl5 gene structure and its associated transcript isoforms. New exonic regions, splice sites and UTRs are described, confirming the presence of four distinct transcript isoforms. The predominant isoform in the brain, which we name rCdkl5_1, is orthologous to the human hCDKL5_1 and mouse mCdkl5_1 isoforms and is the most highly expressed isoform across all brain regions tested. This updated gene model of Cdkl5 in rat provides a framework for studies into its protein products and provides a reference for the development of molecular therapies for testing in rat models of CDKL5 disorder. Copyright © 2016 Elsevier B.V. All rights reserved.

Characterising an implementation intervention in terms of behaviour change techniques and theory: the 'Sepsis Six' clinical care bundle.

PubMed

Steinmo, Siri; Fuller, Christopher; Stone, Sheldon P; Michie, Susan

2015-08-08

Sepsis is a major cause of death from infection, with a mortality rate of 36 %. This can be halved by implementing the 'Sepsis Six' evidence-based care bundle within 1 h of presentation. A UK audit has shown that median implementation rates are 27-47 % and interventions to improve this have demonstrated minimal effects. In order to develop more effective implementation interventions, it is helpful to obtain detailed characterisations of current interventions and to draw on behavioural theory to identify mechanisms of change. The aim of this study was to illustrate this process by using the Behaviour Change Wheel; Behaviour Change Technique (BCT) Taxonomy; Capability, Opportunity, Motivation model of behaviour; and Theoretical Domains Framework to characterise the content and theoretical mechanisms of action of an existing intervention to implement Sepsis Six. Data came from documentary, interview and observational analyses of intervention delivery in several wards of a UK hospital. A broad description of the intervention was created using the Template for Intervention Description and Replication framework. Content was specified in terms of (i) component BCTs using the BCT Taxonomy and (ii) intervention functions using the Behaviour Change Wheel. Mechanisms of action were specified using the Capability, Opportunity, Motivation model and the Theoretical Domains Framework. The intervention consisted of 19 BCTs, with eight identified using all three data sources. The BCTs were delivered via seven functions of the Behaviour Change Wheel, with four ('education', 'enablement', 'training' and 'environmental restructuring') supported by the three data sources. The most frequent mechanisms of action were reflective motivation (especially 'beliefs about consequences' and 'beliefs about capabilities') and psychological capability (especially 'knowledge'). The intervention consisted of a wide range of BCTs targeting a wide range of mechanisms of action. This study demonstrates the utility of the Behaviour Change Wheel, the BCT Taxonomy and the Theoretical Domains Framework, tools recognised for providing guidance for intervention design, for characterising an existing intervention to implement evidence-based care.

Characterisation of exposure to non-ionising electromagnetic fields in the Spanish INMA birth cohort: study protocol.

PubMed

Gallastegi, Mara; Guxens, Mònica; Jiménez-Zabala, Ana; Calvente, Irene; Fernández, Marta; Birks, Laura; Struchen, Benjamin; Vrijheid, Martine; Estarlich, Marisa; Fernández, Mariana F; Torrent, Maties; Ballester, Ferrán; Aurrekoetxea, Juan J; Ibarluzea, Jesús; Guerra, David; González, Julián; Röösli, Martin; Santa-Marina, Loreto

2016-02-18

Analysis of the association between exposure to electromagnetic fields of non-ionising radiation (EMF-NIR) and health in children and adolescents is hindered by the limited availability of data, mainly due to the difficulties on the exposure assessment. This study protocol describes the methodologies used for characterising exposure of children to EMF-NIR in the INMA (INfancia y Medio Ambiente- Environment and Childhood) Project, a prospective cohort study. Indirect (proximity to emission sources, questionnaires on sources use and geospatial propagation models) and direct methods (spot and fixed longer-term measurements and personal measurements) were conducted in order to assess exposure levels of study participants aged between 7 and 18 years old. The methodology used varies depending on the frequency of the EMF-NIR and the environment (homes, schools and parks). Questionnaires assessed the use of sources contributing both to Extremely Low Frequency (ELF) and Radiofrequency (RF) exposure levels. Geospatial propagation models (NISMap) are implemented and validated for environmental outdoor sources of RFs using spot measurements. Spot and fixed longer-term ELF and RF measurements were done in the environments where children spend most of the time. Moreover, personal measurements were taken in order to assess individual exposure to RF. The exposure data are used to explore their relationships with proximity and/or use of EMF-NIR sources. Characterisation of the EMF-NIR exposure by this combination of methods is intended to overcome problems encountered in other research. The assessment of exposure of INMA cohort children and adolescents living in different regions of Spain to the full frequency range of EMF-NIR extends the characterisation of environmental exposures in this cohort. Together with other data obtained in the project, on socioeconomic and family characteristics and development of the children and adolescents, this will enable to evaluate the complex interaction between health outcomes in children and adolescents and the various environmental factors that surround them.

Quantitative Characterisation and Analysis of Siliciclastic Fluvial Depositional Systems Using 3D Digital Outcrop Models

NASA Astrophysics Data System (ADS)

Burnham, Brian Scott

Outcrop analogue studies of fluvial sedimentary systems are often undertaken to identify spatial and temporal characteristics (e.g. stacking patterns, lateral continuity, lithofacies proportions). However, the lateral extent typically exceeds that of the exposure, and/or the true width and thickness are not apparent. Accurate characterisation of fluvial sand bodies is integral for accurate identification and subsequent modelling of aquifer and hydrocarbon reservoir architecture. The studies presented in this thesis utilise techniques that integrate lidar, highresolution photography and differential geospatial measurements, to create accurate three-dimensional (3D) digital outcrop models (DOMs) of continuous 3D and laterally extensive 2D outcrop exposures. The sedimentary architecture of outcrops in the medial portion of a large Distributive Fluvial System (DFS) (Huesca fluvial fan) in the Ebro Basin, north-east Spain, and in the fluvio-deltaic succession of the Breathitt Group in the eastern Appalachian Basin, USA, are evaluated using traditional sedimentological and digital outcrop analytical techniques. The major sand bodies in the study areas are quantitatively analysed to accurately characterise spatial and temporal changes in sand body architecture, from two different outcrop exposure types and scales. Several stochastic reservoir simulations were created to approximate fluvial sand body lithological component and connectivity within the medial portion of the Huesca DFS. Results demonstrate a workflow and current methodology adaptation of digital outcrop techniques required for each study to approximate true geobody widths, thickness and characterise architectural patterns (internal and external) of major fluvial sand bodies interpreted as products of DFSs in the Huesca fluvial fan, and both palaeovalleys and progradational DFSs in the Pikeville and Hyden Formations in the Breathitt Group. The results suggest key geostatistical metrics, which are translatable across any fluvial system that can be used to analyse 3D digital outcrop data, and identify spatial attributes of sand bodies to identify their genetic origin and lithological component within fluvial reservoir systems, and the rock record. 3D quantitative analysis of major sand bodies have allowed more accurate width vs. thickness relationships within the La Serreta area, showing a vertical increase in width and channel-fill facies, and demonstrates a 22% increase of in-channel facies from previous interpretations. Additionally, identification of deposits that are products of a nodal avulsion event have been characterised and are interpreted to be the cause for the increase in width and channel-fill facies. Furthermore, analysis of the Pikeville and Hyden Fms contain sand bodies of stacked distributaries and palaeovalleys, as previously interpreted, and demonstrates that a 3D spatial approach to determine basin-wide architectural trends is integral to identifying the genetic origin, and preservation potential of sand bodies of both palaeovalleys and distributive fluvial systems. The resultant geostatistics assimilated in the thesis demonstrates the efficacy of integrated lidar studies of outcrop analogues, and provide empirical relationships which can be applied to subsurface analogues for reservoir model development and the distribution of both DFS and palaeovalley depositional systems in the rock record.

'Old and ill': death anxiety and coping strategies influencing health professionals' well-being and dementia care.

PubMed

McKenzie, Ellen L; Brown, Patricia M; Mak, Anita S; Chamberlain, Peter

2017-06-01

This paper examined the psychological factors that influence the well-being of health professionals who work with people with dementia and the types of care (person-centred or task-oriented) provided to these patients. The literature was reviewed to identify the factors influencing the well-being of, and types of care provided by, health professionals working with people experiencing dementia. Based on our review of the literature, we propose that approaches to care and the well-being of health professionals working with dementia patients are influenced by the characterisation of dementia as a terminal illness that typically occurs in older people. Drawing upon terror management theory, we argue that exposure to dementia patients is likely to promote awareness of one's own mortality and death-related anxiety. A theoretical model is presented which posits that health professionals working in dementia care draw on experiential avoidance to manage this anxiety. Both death anxiety, and coping strategies, such as experiential avoidance, used to manage this anxiety may influence health professionals' approaches to care of, and attitudes towards, dementia patients. We also suggest a bi-directional relationship between health professionals' approaches to care and well-being. Recommendations are made regarding future directions for research and implications for training of health professionals providing direct service or consultation in dementia care.

Pharmacotherapy in pediatric epilepsy: from trial and error to rational drug and dose selection - a long way to go.

PubMed

van Dijkman, Sven C; Alvarez-Jimenez, Ricardo; Danhof, Meindert; Della Pasqua, Oscar

2016-10-01

Whereas ongoing efforts in epilepsy research focus on the underlying disease processes, the lack of a physiologically based rationale for drug and dose selection contributes to inadequate treatment response in children. In fact, limited information on the interindividual variation in pharmacokinetics and pharmacodynamics of anti-epileptic drugs (AEDs) in children drive prescription practice, which relies primarily on dose regimens according to a mg/kg basis. Such practice has evolved despite advancements in pediatric pharmacology showing that growth and maturation processes do not correlate linearly with changes in body size. In this review we aim to provide 1) a comprehensive overview of the sources of variability in the response to AEDs, 2) insight into novel methodologies to characterise such variation and 3) recommendations for treatment personalisation. The use of pharmacokinetic-pharmacodynamic principles in clinical practice is hindered by the lack of biomarkers and by practical constraints in the evaluation of polytherapy. The identification of biomarkers and their validation as tools for drug development and therapeutics will require some time. Meanwhile, one should not miss the opportunity to integrate the available pharmacokinetic data with modeling and simulation concepts to prevent further delays in the development of personalised treatments for pediatric patients.

High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto ABS Plastics via Injection Moulding

NASA Astrophysics Data System (ADS)

Otanocha, Omonigho B.; Li, Lin; Zhong, Shan; Liu, Zhu

2016-03-01

H13 tool steels are often used as dies and moulds for injection moulding of plastic components. Certain injection moulded components require micro-patterns on their surfaces in order to modify the physical properties of the components or for better mould release to reduce mould contamination. With these applications it is necessary to study micro-patterning to moulds and to ensure effective pattern transfer and replication onto the plastic component during moulding. In this paper, we report an investigation into high average powered (100 W) picosecond laser interactions with H13 tool steel during surface micro-patterning (texturing) and the subsequent pattern replication on ABS plastic material through injection moulding. Design of experiments and statistical modelling were used to understand the influences of laser pulse repetition rate, laser fluence, scanning velocity, and number of scans on the depth of cut, kerf width and heat affected zones (HAZ) size. The characteristics of the surface patterns are analysed. The process parameter interactions and significance of process parameters on the processing quality and efficiency are characterised. An optimum operating window is recommended. The transferred geometry is compared with the patterns generated on the dies. A discussion is made to explain the characteristics of laser texturing and pattern replication on plastics.

Bio-active glass air-abrasion has the potential to remove resin composite restorative material selectively

NASA Astrophysics Data System (ADS)

Milly, Hussam; Andiappan, Manoharan; Thompson, Ian; Banerjee, Avijit

2014-06-01

The aims of this study were to assess: (a) the chemistry, morphology and bioactivity of bio-active glass (BAG) air-abrasive powder, (b) the effect of three air-abrasion operating parameters: air pressure, powder flow rate (PFR) and the abrasive powder itself, on the selective removal of resin composite and (c) the required "time taken". BAG abrasive particles were characterised using scanning electron microscopy-energy dispersive X-ray spectrometry (SEM-EDX) and Fourier-transform infrared spectroscopy (FTIR). Standardised resin composite restorations created within an enamel analogue block (Macor™) in vitro, were removed using air-abrasion undersimulated clinical conditions. 90 standardised cavities were scanned before and after resin composite removal using laser profilometry and the volume of the resulting 3D images calculated. Multilevel linear model was used to identify the significant factors affecting Macor™ removal. BAG powder removed resin composite more selectively than conventional air-abrasion alumina powder using the same operating parameters (p < 0.001) and the effect of altering the unit's operating parameters was significant (p < 0.001). In conclusion, BAG powder is more efficient than alumina in the selective removal of resin composite particularly under specific operating parameters, and therefore may be recommended clinically as a method of preserving sound enamel structure when repairing and removing defective resin composite restorations.

The communication of laboratory investigations by university entrants

NASA Astrophysics Data System (ADS)

Campbell, Bob; Kaunda, Loveness; Allie, Saalih; Buffler, Andy; Lubben, Fred

2000-10-01

The purpose of the study reported here was to analyse the ways in which unversity entrant science students carry out and communicate experimental activities and to identify a model to explain characteristic communication practices. The study was prompted by a need to inform the development of an introductory laboratory course. The students studied shared an educational background characterised by a lack of experience with laboratory work and scientific writing. Seven groups of three students were studied. The investigative strategies of these groups were observed. Laboratory reports were used to identify the ways in which students communicated these strategies. Data are presented that show a discrepancy between the strategies used and those reported. The results suggest that: (i) students' perceptions of the purpose of a laboratory task influence their decisions on what to report; (ii) understandings of laboratory procedures greatly influence their decision on what to report and on how much detail to include in a report and; (iii) knowledge of discourse rules contributes to effective reporting. It is concluded that students' communication of an investigation results from the differential operation of various perceptual filters that determine both the procedural and discourse elements of their reports. It is recommended that the communication of science should be taught explicitly and alongside the procedures and concepts of science.

Vegetation in drylands: Effects on wind flow and aeolian sediment transport

USDA-ARS?s Scientific Manuscript database

Drylands are characterised by patchy vegetation, erodible surfaces and erosive aeolian processes. Empirical and modelling studies have shown that vegetation elements provide drag on the overlying airflow, thus affecting wind velocity profiles and altering erosive dynamics on desert surfaces. However...

Inclusive Education and the Arts

ERIC Educational Resources Information Center

Allan, Julie

2014-01-01

This paper addresses the troubled, problematic and contested field of inclusive education, characterised by antagonisms between so-called inclusionists and special educationists; frustration, particularly among disability activists caused by the abstraction of the social model of disability and the expansion of the special educational needs…

Testing Pearl Model In Three European Sites

NASA Astrophysics Data System (ADS)

Bouraoui, F.; Bidoglio, G.

The Plant Protection Product Directive (91/414/EEC) stresses the need of validated models to calculate predicted environmental concentrations. The use of models has become an unavoidable step before pesticide registration. In this context, European Commission, and in particular DGVI, set up a FOrum for the Co-ordination of pes- ticide fate models and their USe (FOCUS). In a complementary effort, DG research supported the APECOP project, with one of its objective being the validation and im- provement of existing pesticide fate models. The main topic of research presented here is the validation of the PEARL model for different sites in Europe. The PEARL model, actually used in the Dutch pesticide registration procedure, was validated in three well- instrumented sites: Vredepeel (the Netherlands), Brimstone (UK), and Lanna (Swe- den). A step-wise procedure was used for the validation of the PEARL model. First the water transport module was calibrated, and then the solute transport module, using tracer measurements keeping unchanged the water transport parameters. The Vrede- peel site is characterised by a sandy soil. Fourteen months of measurements were used for the calibration. Two pesticides were applied on the site: bentazone and etho- prophos. PEARL predictions were very satisfactory for both soil moisture content, and pesticide concentration in the soil profile. The Brimstone site is characterised by a cracking clay soil. The calibration was conducted on a time series measurement of 7 years. The validation consisted in comparing predictions and measurement of soil moisture at different soil depths, and in comparing the predicted and measured con- centration of isoproturon in the drainage water. The results, even if in good agreement with the measuremens, highlighted the limitation of the model when the preferential flow becomes a dominant process. PEARL did not reproduce well soil moisture pro- file during summer months, and also under-predicted the arrival of isoproturon to the drains. The Lanna site is characterised by s structured clay soil. PEARL was success- ful in predicting soil moisture profiles and the draining water. PEARL performed well in predicting the soil concentration of bentazone at different depth. However, since PEARL does not consider cracks in the soil, it did not predict well the peak concen- trations of bentazone in the drainage water. Along with the validation results for the three sites, a sensitivity analysis of the model is presented.

Evaluating the roles of detailed endocardial structures on right ventricular haemodynamics by means of CFD simulations.

PubMed

Sacco, Federica; Paun, Bruno; Lehmkuhl, Oriol; Iles, Tinen L; Iaizzo, Paul A; Houzeaux, Guillaume; Vázquez, Mariano; Butakoff, Constantine; Aguado-Sierra, Jazmin

2018-06-11

Computational modelling plays an important role in right ventricular (RV) haemodynamic analysis. However, current approaches employ smoothed ventricular anatomies. The aim of this study is to characterise RV haemodynamics including detailed endocardial structures like trabeculae, moderator band and papillary muscles (PMs). Four paired detailed and smoothed RV endocardium models (two male and two female) were reconstructed from ex-vivo human hearts high-resolution magnetic resonance images (MRI). Detailed models include structures with ≥1 mm 2 cross-sectional area. Haemodynamic characterisation was done by computational fluid dynamics (CFD) simulations with steady and transient inflows, using high performance computing (HPC). The differences between the flows in smoothed and detailed models were assessed using Q-criterion for vorticity quantification, the pressure drop between inlet and outlet, and the wall shear stress (WSS). Results demonstrated that detailed endocardial structures increase the degree of intra-ventricular pressure drop, decrease the WSS and disrupt the dominant vortex creating secondary small vortices. Increasingly turbulent blood flow was observed in the detailed RVs. Female RVs were less trabeculated and presented lower pressure drops than the males. In conclusion, neglecting endocardial structures in RV haemodynamic models may lead to inaccurate conclusions about the pressures, stresses, and blood flow behaviour in the cavity. This article is protected by copyright. All rights reserved.

Characterisation of serpin polymers in vitro and in vivo.

PubMed

Belorgey, Didier; Irving, James A; Ekeowa, Ugo I; Freeke, Joanna; Roussel, Benoit D; Miranda, Elena; Pérez, Juan; Robinson, Carol V; Marciniak, Stefan J; Crowther, Damian C; Michel, Claire H; Lomas, David A

2011-03-01

Neuroserpin is a member of the serine protease inhibitor or serpin superfamily of proteins. It is secreted by neurones and plays an important role in the regulation of tissue plasminogen activator at the synapse. Point mutations in the neuroserpin gene cause the autosomal dominant dementia familial encephalopathy with neuroserpin inclusion bodies or FENIB. This is one of a group of disorders caused by mutations in the serpins that are collectively known as the serpinopathies. Others include α(1)-antitrypsin deficiency and deficiency of C1 inhibitor, antithrombin and α(1)-antichymotrypsin. The serpinopathies are characterised by delays in protein folding and the retention of ordered polymers of the mutant serpin within the cell of synthesis. The clinical phenotype results from either a toxic gain of function from the inclusions or a loss of function, as there is insufficient protease inhibitor to regulate important proteolytic cascades. We describe here the methods required to characterise the polymerisation of neuroserpin and draw parallels with the polymerisation of α(1)-antitrypsin. It is important to recognise that the conditions in which experiments are performed will have a major effect on the findings. For example, incubation of monomeric serpins with guanidine or urea will produce polymers that are not found in vivo. The characterisation of the pathological polymers requires heating of the folded protein or alternatively the assessment of ordered polymers from cell and animal models of disease or from the tissues of humans who carry the mutation. Copyright © 2010 Elsevier Inc. All rights reserved.

Isolation and characterisation of mesenchymal stem/stromal cells in the ovine endometrium.

PubMed

Letouzey, Vincent; Tan, Ker Sin; Deane, James A; Ulrich, Daniela; Gurung, Shanti; Ong, Y Rue; Gargett, Caroline E

2015-01-01

Mesenchymal stem/stromal cells (MSC) were recently discovered in the human endometrium. These cells possess key stem cell properties and show promising results in small animal models when used for preclinical tissue engineering studies. A small number of surface markers have been identified that enrich for MSC from bone marrow and human endometrium, including the Sushi Domain-containing 2 (SUSD2; W5C5) and CD271 markers. In preparation for developing a large animal preclinical model for urological and gynecological tissue engineering applications we aimed to identify and characterise MSC in ovine endometrium and determine surface markers to enable their prospective isolation. Ovine endometrium was obtained from hysterectomised ewes following progesterone synchronisation, dissociated into single cell suspensions and tested for MSC surface markers and key stem cell properties. Purified stromal cells were obtained by flow cytometry sorting with CD49f and CD45 to remove epithelial cells and leukocytes respectively, and MSC properties investigated. There was a small population CD271+ stromal cells (4.5 ± 2.3%) in the ovine endometrium. Double labelling with CD271 and CD49f showed that the sorted CD271+CD49f- stromal cell population possessed significantly higher cloning efficiency, serial cloning capacity and a qualitative increased ability to differentiate into 4 mesodermal lineages (adipocytic, smooth muscle, chondrocytic and osteoblastic) than CD271-CD49f- cells. Immunolabelling studies identified an adventitial perivascular location for ovine endometrial CD271+ cells. This is the first study to characterise MSC in the ovine endometrium and identify a surface marker profile identifying their location and enabling their prospective isolation. This knowledge will allow future preclinical studies with a large animal model that is well established for pelvic organ prolapse research.

Gastric epithelioid haemangioendothelioma.

PubMed

Tavares, A B; Almeida, A G; Viveiros, F A; Cidade, C N; Barbosa, J M

2011-05-10

Epithelioid haemangioendothelioma (EHE) is a rare tumour of vascular origin, characterised by celular proliferation, endotelial, epitelioid or hystiocitoid. It may develop in any organ, but it is more common in lung and liver. Surgery is the recommended treatment; however, in case of a potentially benign situation, an expectant attitude should be adopted. The case reports a 71-year-old female who underwent a laparotomy for a colonic adenocarcinoma. During surgery, a polypoid lesion in the dependency of the gastric wall was found incidentally, which was removed. Histopathology and immunohistochemical analysis confirmed the diagnosis of EHE. Gastric vascular neoplasms represent about 0.9-3.3% of all gastric tumours. Usually have a good prognosis, but due to the borderline biological behaviour of these tumours, it is important to have a detailed clinical evaluation at follow-up of these patients.

Characterising the perceived value of mathematics educational apps in preservice teachers

NASA Astrophysics Data System (ADS)

Handal, Boris; Campbell, Chris; Cavanagh, Michael; Petocz, Peter

2016-03-01

This study validated the semantic items of three related scales aimed at characterising the perceived worth of mathematics-education-related mobile applications (apps). The technological pedagogical content knowledge (TPACK) model was used as the conceptual framework for the analysis. Three hundred and seventy-three preservice students studying primary school education from two public and one private Australian universities participated in the study. The respondents examined three different apps using a purposively designed instrument in regard to either their explorative, productive or instructive instructional role. While construct validity could not be established due to a broad range of variability in responses implying a high degree of subjectivity in respondents' judgments, the qualitative analysis was effective in establishing content validity.

Childhood leukaemia risks: from unexplained findings near nuclear installations to recommendations for future research.

PubMed

Laurier, D; Grosche, B; Auvinen, A; Clavel, J; Cobaleda, C; Dehos, A; Hornhardt, S; Jacob, S; Kaatsch, P; Kosti, O; Kuehni, C; Lightfoot, T; Spycher, B; Van Nieuwenhuyse, A; Wakeford, R; Ziegelberger, G

2014-09-01

Recent findings related to childhood leukaemia incidence near nuclear installations have raised questions which can be answered neither by current knowledge on radiation risk nor by other established risk factors. In 2012, a workshop was organised on this topic with two objectives: (a) review of results and discussion of methodological limitations of studies near nuclear installations; (b) identification of directions for future research into the causes and pathogenesis of childhood leukaemia. The workshop gathered 42 participants from different disciplines, extending widely outside of the radiation protection field. Regarding the proximity of nuclear installations, the need for continuous surveillance of childhood leukaemia incidence was highlighted, including a better characterisation of the local population. The creation of collaborative working groups was recommended for consistency in methodologies and the possibility of combining data for future analyses. Regarding the causes of childhood leukaemia, major fields of research were discussed (environmental risk factors, genetics, infections, immunity, stem cells, experimental research). The need for multidisciplinary collaboration in developing research activities was underlined, including the prevalence of potential predisposition markers and investigating further the infectious aetiology hypothesis. Animal studies and genetic/epigenetic approaches appear of great interest. Routes for future research were pointed out.

Intensive olive orchards on sloping land: good water and pest management are essential.

PubMed

Metzidakis, I; Martinez-Vilela, A; Castro Nieto, G; Basso, B

2008-11-01

There is intensive cultivation of olives on sloping land in Jaen-Granada (Spain), Basilicata (Italy) and Western Crete (Greece). The intensive olive groves here are characterised by a tree density of about 250treesha(-1), yearly fertilisation and pruning, several chemical sprays for pest control, soil tillage once to thrice per year and irrigation up to 2700m3ha(-1)yr(-1). Intensive management results in high yields of 3600-6500kgha(-1) but also higher labour costs of 1154-1590euroha(-1)yr(-1), varying per area. The major environmental concerns in this system are related to chemical residues in the fruit, the extinction of useful insects, the depletion of groundwater resources, the pollution of soil and water and the erosion of soil. This paper describes the impact of intensive orchard management on natural resources and gives recommendations for soil and water conservation, reduction of chemicals use and biodiversity enhancement. The specific recommendations for the relevant stakeholders--farmers, technicians, agricultural services and policy makers--are based on the experimental evaluation of different agricultural practices and a socio-economic analysis of local and global production and markets.

From an 'ice-see' perspective: The current use, potential and limitations of Structure-from-Motion photogrammetry for cryospheric applications

NASA Astrophysics Data System (ADS)

Westoby, Matthew; Dunning, Stuart; Allan, Mark; Smith, Mark; Quincey, Duncan; Carrivick, Jonathan; Watson, C. Scott

2016-04-01

Structure-from-Motion with Multi-View Stereo (SfM-MVS) methods are rapidly becoming the tool of choice for geoscientists who require a relatively low-cost and viable alternative to traditional surveying technologies for characterising the form and short-term evolution of Earth surface landforms and landscapes. Uptake of SfM-MVS methods by workers in the cryospheric science community has been particularly rapid. The choice to use SfM-MVS has many logistical benefits which promote its adoption in remote glacial environments, namely the requirement for little more than a digital camera and proprietary or open-source software for topographic reconstruction, and a surveyed network of ground control to transform the resultant 3D models into a real-world co-ordinate system, if desired. Optionally, a dedicated aerial photography platform (e.g. kite, blimp, multirotor or fixed-wing UAV) may be used for initial photograph acquisition, which can facilitate glacier-scale observation and analysis. To date, cryospheric applications of SfM-MVS have included: the monitoring of glacier, moraine, and rock glacier movement; the evolution of ice cliffs on debris-covered glaciers; the reconstruction of ice-marginal or deglaciated topography; patch- and moraine-scale sedimentological characterisation; and the characterisation of glacier surfaces to monitor supraglacial drainage development or to inform energy balance modelling. This contribution will showcase existing applications and original data and discuss exciting potential opportunities and current limitations of the SfM-MVS method for the cryospheric sciences.

Molecular pathogenesis of precursor lesions of pancreatic ductal adenocarcinoma.

PubMed

Biankin, Andrew V; Kench, James G; Dijkman, Floriaan P; Biankin, Sandra A; Henshall, Susan M

2003-02-01

Precursor lesions are assuming greater importance in the study of pancreatic ductal adenocarcinoma. As pancreatic cancer is almost universally fatal due to late clinical presentation and biological aggressiveness, characterisation of its precursor lesions may create scope for early diagnosis and improved outcome with conventional therapies as well as the development of novel therapeutic and preventative strategies. Pancreatic intraepithelial neoplasia (PanIN) and intraductal papillary mucinous tumours (IPMTs) are thought to be precursor lesions of ductal adenocarcinoma of the pancreas. Recent work has focused on the molecular aberrations associated with these lesions leading to the formulation of a progression model for pancreatic cancer. Progressive histopathological changes along the progression model are associated with aberrations of cell cycle regulatory and growth factor signalling molecules that occur in pancreatic cancer at high frequency and are common to many cancers. Characterisation of these molecular aberrations provides scope for the development of novel diagnostic and treatment strategies that will ultimately impact on the outcome for people who develop pancreatic cancer.

Particle sorting by Paramecium cilia arrays.

PubMed

Mayne, Richard; Whiting, James G H; Wheway, Gabrielle; Melhuish, Chris; Adamatzky, Andrew

Motile cilia are cell-surface organelles whose purposes, in ciliated protists and certain ciliated metazoan epithelia, include generating fluid flow, sensing and substance uptake. Certain properties of cilia arrays, such as beating synchronisation and manipulation of external proximate particulate matter, are considered emergent, but remain incompletely characterised despite these phenomena having being the subject of extensive modelling. This study constitutes a laboratory experimental characterisation of one of the emergent properties of motile cilia: manipulation of adjacent particulates. The work demonstrates through automated videomicrographic particle tracking that interactions between microparticles and somatic cilia arrays of the ciliated model organism Paramecium caudatum constitute a form of rudimentary 'sorting'. Small particles are drawn into the organism's proximity by cilia-induced fluid currents at all times, whereas larger particles may be held immobile at a distance from the cell margin when the cell generates characteristic feeding currents in the surrounding media. These findings can contribute to the design and fabrication of biomimetic cilia, with potential applications to the study of ciliopathies. Copyright © 2017 Elsevier B.V. All rights reserved.

Detection of quantum well induced single degenerate-transition-dipoles in ZnO nanorods.

PubMed

Ghosh, Siddharth; Ghosh, Moumita; Seibt, Michael; Rao, G Mohan

2016-02-07

Quantifying and characterising atomic defects in nanocrystals is difficult and low-throughput using the existing methods such as high resolution transmission electron microscopy (HRTEM). In this article, using a defocused wide-field optical imaging technique, we demonstrate that a single ultrahigh-piezoelectric ZnO nanorod contains a single defect site. We model the observed dipole-emission patterns from optical imaging with a multi-dimensional dipole and find that the experimentally observed dipole pattern and model-calculated patterns are in excellent agreement. This agreement suggests the presence of vertically oriented degenerate-transition-dipoles in vertically aligned ZnO nanorods. The HRTEM of the ZnO nanorod shows the presence of a stacking fault, which generates a localised quantum well induced degenerate-transition-dipole. Finally, we elucidate that defocused wide-field imaging can be widely used to characterise defects in nanomaterials to answer many difficult questions concerning the performance of low-dimensional devices, such as in energy harvesting, advanced metal-oxide-semiconductor storage, and nanoelectromechanical and nanophotonic devices.

Developing a semantic web model for medical differential diagnosis recommendation.

PubMed

Mohammed, Osama; Benlamri, Rachid

2014-10-01

In this paper we describe a novel model for differential diagnosis designed to make recommendations by utilizing semantic web technologies. The model is a response to a number of requirements, ranging from incorporating essential clinical diagnostic semantics to the integration of data mining for the process of identifying candidate diseases that best explain a set of clinical features. We introduce two major components, which we find essential to the construction of an integral differential diagnosis recommendation model: the evidence-based recommender component and the proximity-based recommender component. Both approaches are driven by disease diagnosis ontologies designed specifically to enable the process of generating diagnostic recommendations. These ontologies are the disease symptom ontology and the patient ontology. The evidence-based diagnosis process develops dynamic rules based on standardized clinical pathways. The proximity-based component employs data mining to provide clinicians with diagnosis predictions, as well as generates new diagnosis rules from provided training datasets. This article describes the integration between these two components along with the developed diagnosis ontologies to form a novel medical differential diagnosis recommendation model. This article also provides test cases from the implementation of the overall model, which shows quite promising diagnostic recommendation results.

Use of Simulators to Explore Specialty Recommendation for a Palpable Breast Mass

PubMed Central

Laufer, Shlomi; Ray, Rebecca D.; D'Angelo, Anne-Lise D.; Jones, Grace F.; Pugh, Carla M.

2015-01-01

Background The study aim was to evaluate recommendation patterns of different specialties for the work-up of a palpable breast mass using simulated scenarios and clinical breast examination (CBE) models. Methods Study participants were a convenience sample of physicians (n=318) attending annual surgical, family practice and obstetrics and gynecology (OB/GYN) conferences. Two different silicone-based breast models (superficial mass vs chest wall mass) were used to test CBE skills and recommendation patterns (imaging, tissue sampling, and follow-up). Results Participants were more likely to recommend mammography (p<.001) and core biopsy (p<.0001) and less likely to recommend needle aspiration (p<.043) and 1-month follow up (p<.001) for the chest wall mass compared to the superficial mass. Family practitioners were less likely to recommend ultrasound (p<.001) and OB/GYNs were less likely to recommend mammogram (p<.006) across models. Surgeons were more likely to recommend core biopsy and less likely to recommend needle aspiration across models (p<.001) Conclusions Recommendation patterns differed across the two models in line with existing practice guidelines. Additionally, differences in practice patterns between primary care and specialty providers may represent varying clinician capabilities, health care resources, and individual preferences. Our work shows that simulation may be used to track adherence to practice guidelines for breast masses. PMID:26198334

Adherence to the Nordic Nutrition Recommendations in a Nordic population with metabolic syndrome: high salt consumption and low dietary fibre intake (The SYSDIET study).

PubMed

Jonsdottir, Svandis Erna; Brader, Lea; Gunnarsdottir, Ingibjorg; Kally Magnusdottir, Ola; Schwab, Ursula; Kolehmainen, Marjukka; Risérus, Ulf; Herzig, Karl-Heinz; Cloetens, Lieselotte; Helgegren, Hannah; Johansson-Persson, Anna; Hukkanen, Janne; Poutanen, Kaisa; Uusitupa, Matti; Hermansen, Kjeld; Thorsdottir, Inga

2013-12-16

The Nordic countries collaborate in setting recommendations for intake of nutrients by publishing the Nordic Nutrition Recommendations (NNR). Studies exploring how well the Nordic population adheres to the NNR are limited and none are available for the metabolic syndrome (MetS) subgroup. Individuals with MetS are a large part of the adult Nordic population and their diet's nutritional quality is of great importance as it can affect the progression of MetS. To evaluate nutritional intake in a cohort of Nordic adults with MetS or MetS risk factors and their adherence to the NNR. A multi-centre study was carried out in six centres in four Nordic countries (SYSDIET CoE). Participants (n=175) were 30-65 years of age, with BMI 27-38 kg/m(2) and had at least two criteria for MetS. The NNR was used to evaluate the baseline nutrient intake calculated from the participants' 4-day food diaries using national nutrient databases. Less than 20% of participants consumed ≤10 E% from saturated fat as recommended in the NNR. Recommended intake (RI) of polyunsaturated fat was met by approximately one-third of participants. Only 20% of men and 26% of women met the RI of dietary fibre. Intake below the defined lower intake level of 2.5 µg/day for vitamin D was observed in nearly 20% of participants. The daily median intake of salt was 8.8 g for men and 6.7 g for women. Dietary quality of this Nordic population with Mets or MetS risk factors is unsatisfactory and characterised by high intakes of SFA and sodium and low intakes of PUFA and dietary fibre. Vitamin D intake was below RI level in a large part of the population. Authorities in the Nordic countries are encouraged to develop intervention programmes for high-risk groups.

Extensive characterisation of bioactive phenolic constituents from globe artichoke (Cynara scolymus L.) by HPLC-DAD-ESI-QTOF-MS.

PubMed

Abu-Reidah, Ibrahim M; Arráez-Román, David; Segura-Carretero, Antonio; Fernández-Gutiérrez, Alberto

2013-12-01

The aim of this work was to characterise the phenolic compounds in artichoke (hearts) by using HPLC coupled to DAD-ESI-QTOF-MS, which proved useful in characterising 61 phenolic and other polar compounds. Notably, of the 61 compounds characterised, 34 new phenolic compounds with their isomers have been tentatively characterised in artichoke for the first time, namely: 3 hydroxybenzoic acids, 17 hydroxycinnamic acids, 4 lignans, 7 flavones, 2 flavonols, and 1 phenol derivative. Moreover, a total of 28 isomers of previously described phenolics have also been detected. The data compiled from the qualitative polyphenol characterisation indicate that the artichoke extract analysed (Blanca de Tudela variety) could be regarded as a bioactive functional food and also as a promising source of antioxidant phenolic compounds. Copyright © 2013 Elsevier Ltd. All rights reserved.

Characterisation methods for the hyperspectral sensor HySpex at DLR's calibration home base

NASA Astrophysics Data System (ADS)

Baumgartner, Andreas; Gege, Peter; Köhler, Claas; Lenhard, Karim; Schwarzmaier, Thomas

2012-09-01

The German Aerospace Center's (DLR) Remote Sensing Technology Institute (IMF) operates a laboratory for the characterisation of imaging spectrometers. Originally designed as Calibration Home Base (CHB) for the imaging spectrometer APEX, the laboratory can be used to characterise nearly every airborne hyperspectral system. Characterisation methods will be demonstrated exemplarily with HySpex, an airborne imaging spectrometer system from Norsk Elektro Optikks A/S (NEO). Consisting of two separate devices (VNIR-1600 and SWIR-320me) the setup covers the spectral range from 400 nm to 2500 nm. Both airborne sensors have been characterised at NEO. This includes measurement of spectral and spatial resolution and misregistration, polarisation sensitivity, signal to noise ratios and the radiometric response. The same parameters have been examined at the CHB and were used to validate the NEO measurements. Additionally, the line spread functions (LSF) in across and along track direction and the spectral response functions (SRF) for certain detector pixels were measured. The high degree of lab automation allows the determination of the SRFs and LSFs for a large amount of sampling points. Despite this, the measurement of these functions for every detector element would be too time-consuming as typical detectors have 105 elements. But with enough sampling points it is possible to interpolate the attributes of the remaining pixels. The knowledge of these properties for every detector element allows the quantification of spectral and spatial misregistration (smile and keystone) and a better calibration of airborne data. Further laboratory measurements are used to validate the models for the spectral and spatial properties of the imaging spectrometers. Compared to the future German spaceborne hyperspectral Imager EnMAP, the HySpex sensors have the same or higher spectral and spatial resolution. Therefore, airborne data will be used to prepare for and validate the spaceborne system's data.

Evaluating the performance of Sentinel-3 SRAL SAR Altimetry in the Coastal and Open Ocean, and developing improved retrieval methods - The ESA SCOOP Project.

NASA Astrophysics Data System (ADS)

Benveniste, J.; Cotton, D.; Moreau, T.; Varona, E.; Roca, M.; Cipollini, P.; Cancet, M.; Martin, F.; Fenoglio-Marc, L.; Naeije, M.; Fernandes, J.; Restano, M.; Ambrozio, A.

2016-12-01

The ESA Sentinel-3 satellite, launched in February 2016 as a part of the Copernicus programme, is the second satellite to operate a SAR mode altimeter. The Sentinel 3 Synthetic Aperture Radar Altimeter (SRAL) is based on the heritage from Cryosat-2, but this time complemented by a Microwave Radiometer (MWR) to provide a wet troposphere correction, and operating at Ku and C-Bands to provide an accurate along-track ionospheric correction. Together this instrument package, including both GPS and DORIS instruments for accurate positioning, allows accurate measurements of sea surface height over the ocean, as well as measurements of significant wave height and surface wind speed. SCOOP (SAR Altimetry Coastal & Open Ocean Performance) is a project funded under the ESA SEOM (Scientific Exploitation of Operational Missions) Programme Element, started in September 2015, to characterise the expected performance of Sentinel-3 SRAL SAR mode altimeter products, in the coastal zone and open-ocean, and then to develop and evaluate enhancements to the baseline processing scheme in terms of improvements to ocean measurements. There is also a work package to develop and evaluate an improved Wet Troposphere correction for Sentinel-3, based on the measurements from the on-board MWR, further enhanced mostly in the coastal and polar regions using third party data, and provide recommendations for use. At the end of the project recommendations for further developments and implementations will be provided through a scientific roadmap. In this presentation we provide an overview of the SCOOP project, highlighting the key deliverables and discussing the potential impact of the results in terms of the application of delay-Doppler (SAR) altimeter measurements over the open-ocean and coastal zone. We also present the initial results from the project, including: Key findings from a review of the current "state-of-the-art" for SAR altimetry, Specification of the initial "reference" delay-Doppler and echo modelling /retracking processing schemes, Evaluation of the initial Test Data Set in the Open Ocean and Coastal Zone Overview of modifications planned to the reference delay-Doppler and echo modelling/ re-tracking processing schemes.

COMODI: an ontology to characterise differences in versions of computational models in biology.

PubMed

Scharm, Martin; Waltemath, Dagmar; Mendes, Pedro; Wolkenhauer, Olaf

2016-07-11

Open model repositories provide ready-to-reuse computational models of biological systems. Models within those repositories evolve over time, leading to different model versions. Taken together, the underlying changes reflect a model's provenance and thus can give valuable insights into the studied biology. Currently, however, changes cannot be semantically interpreted. To improve this situation, we developed an ontology of terms describing changes in models. The ontology can be used by scientists and within software to characterise model updates at the level of single changes. When studying or reusing a model, these annotations help with determining the relevance of a change in a given context. We manually studied changes in selected models from BioModels and the Physiome Model Repository. Using the BiVeS tool for difference detection, we then performed an automatic analysis of changes in all models published in these repositories. The resulting set of concepts led us to define candidate terms for the ontology. In a final step, we aggregated and classified these terms and built the first version of the ontology. We present COMODI, an ontology needed because COmputational MOdels DIffer. It empowers users and software to describe changes in a model on the semantic level. COMODI also enables software to implement user-specific filter options for the display of model changes. Finally, COMODI is a step towards predicting how a change in a model influences the simulation results. COMODI, coupled with our algorithm for difference detection, ensures the transparency of a model's evolution, and it enhances the traceability of updates and error corrections. COMODI is encoded in OWL. It is openly available at http://comodi.sems.uni-rostock.de/ .

Educational Ambassadors in the Danish Trade Union Movement

ERIC Educational Resources Information Center

Keil, Michael

2008-01-01

The concept of Educational Ambassadors is embedded within the so-called "Danish model" of industrial relations. The Danish industrial relations system is characterised by strong collective organisations with national coverage, which conclude the collective agreements for various industries or sectors and which are mostly grouped under…

Comparison and Validation of Hydrological E-Flow Methods through Hydrodynamic Modelling

NASA Astrophysics Data System (ADS)

Kuriqi, Alban; Rivaes, Rui; Sordo-Ward, Alvaro; Pinheiro, António N.; Garrote, Luis

2017-04-01

Flow regime determines physical habitat conditions and local biotic configuration. The development of environmental flow guidelines to support the river integrity is becoming a major concern in water resources management. In this study, we analysed two sites located in southern part of Portugal, respectively at Odelouca and Ocreza Rivers, characterised by the Mediterranean climate. Both rivers are almost in pristine condition, not regulated by dams or other diversion construction. This study presents an analysis of the effect on fish habitat suitability by the implementation of different hydrological e-flow methods. To conduct this study we employed certain hydrological e-flow methods recommended by the European Small Hydropower Association (ESHA). River hydrology assessment was based on approximately 30 years of mean daily flow data, provided by the Portuguese Water Information System (SNIRH). The biological data, bathymetry, physical and hydraulic features, and the Habitat Suitability Index for fish species were collected from extensive field works. We followed the Instream Flow Incremental Methodology (IFIM) to assess the flow-habitat relationship taking into account the habitat suitability of different instream flow releases. Initially, we analysed fish habitat suitability based on natural conditions, and we used it as reference condition for other scenarios considering the chosen hydrological e-flow methods. We accomplished the habitat modelling through hydrodynamic analysis by using River-2D model. The same methodology was applied to each scenario by considering as input the e-flows obtained from each of the hydrological method employed in this study. This contribution shows the significance of ecohydrological studies in establishing a foundation for water resources management actions. Keywords: ecohydrology, e-flow, Mediterranean rivers, river conservation, fish habitat, River-2D, Hydropower.

A systematic review of economic evaluations of seasonal influenza vaccination for the elderly population in the European Union.

PubMed

Shields, Gemma E; Elvidge, Jamie; Davies, Linda M

2017-06-10

The Council of the European Union (EU) has recommended that action should be taken to increase influenza vaccination in the elderly population. The aims were to systematically review and critically appraise economic evaluations for influenza vaccination in the elderly population in the EU. Electronic searches of the NHS Economic Evaluation, Health Technology Assessment, MEDLINE and Embase databases were run to identify full economic evaluations. Two levels of screening were used, with explicit inclusion criteria applied by two independent reviewers at each stage. Prespecified data extraction and critical appraisal were performed on identified studies. Results were summarised qualitatively. Of the 326 search results, screening identified eight relevant studies. Results varied widely, with the incremental cost-effectiveness ratio ranging from being both more effective and cheaper than no intervention to costing €4 59 350 per life-year gained. Cost-effectiveness was most sensitive to variations in influenza strain, vaccination type and strategy, population and modelling characteristics. Most studies suggest that vaccination is cost-effective (seven of eight studies identified at least one cost-effective scenario). All but one study used economic models to synthesise data from different sources. The results are uncertain due to the methods used and the relevance and robustness of the data used. Sensitivity analysis to explore these aspects was limited. Integrated, controlled prospective clinical and economic evaluations and surveillance data are needed to improve the evidence base. This would allow more advanced modelling techniques to characterise the epidemiology of influenza more accurately and improve the robustness of cost-effectiveness estimates. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Extraction Methods in Soil Phosphorus Characterisation

NASA Astrophysics Data System (ADS)

Soinne, Helena

2010-05-01

Extraction methods are widely used to assess the bioavailability of P and to characterise soil P reserves. Even though new and more sophisticated methods to characterise soil P are constantly developed the use of extraction methods is not likely to be replaced because of the relatively simple analytical equipment needed for the analysis. However, the large variety of extractants, pre-treatments and sample preparation procedures complicate the comparison of published results. In order to improve our understanding of the behaviour and cycling of P in soil, it is important to know the role of extracted P in the soil P cycle. The knowledge of the factors affecting the analytical outcome is a prerequisite for justified interpretation of the results. In this study, the effect of sample pre-treatment and properties of the used extractant on extractable molybdate-reactive phosphorus (MRP) and molybdate-unreactive phosphorus (MUP) was studied. Furthermore, the effect of sample preparation procedures prior the analysis on measured MRP and MUP was studied. Two widely used sequential extraction procedures were compared on their ability to show management induced differences on soil P. These results revealed that pre-treatments changed soil properties and air-drying was found to affect soil P, particularly extractable MUP, thought to represent organic P, by disrupting organic matter. This was evidenced by an increase in the water-extractable small-sized (<0.2 µm) P that, at least partly, took place at the expense of the large-sized (>0.2 µm) P. In addition to the effects of sample pre-treatment, the results showed that extractable organic P was sensitive to the chemical nature of the used extractant and to the sample preparation procedures employed prior to P analysis, including centrifugation and filtering of soil suspensions. Filtering may remove a major proportion of extractable MUP; therefore filtering cannot be recommended in the characterisation of solubilised MUP. However, extractants having high ionic strength may cause the organic molecules to collapse during centrifugation and thus affect the recovered concentration of MUP. These findings highlight the importance of characterising the nature of the MUP extracted with different extractants and acknowledging the sensitivity of MUP to analytical procedures when comparing published results. Widely used sequential fractionation procedures proved to be able to detect land-use -derived differences in the distribution of P among fractions of different solubilities. The results of this study demonstrate that, although the extraction methods do not reveal the biogeochemical function of a given P pool in soil, the extraction methods can be used to detect changes in soil P pools with different solubilities. To obtain the most benefit from extraction methods, we need a better understanding of the biological availability of P and the role of extracted P fraction in the P cycle in soils from different environments (climatic and weather) and land-uses.

Using a source-receptor approach to characterise VOC behaviour in a French urban area influenced by industrial emissions. Part II: source contribution assessment using the Chemical Mass Balance (CMB) model.

PubMed

Badol, Caroline; Locoge, Nadine; Galloo, Jean-Claude

2008-01-25

In Part I of this study (Badol C, Locoge N, Leonardis T, Gallo JC. Using a source-receptor approach to characterise VOC behaviour in a French urban area influenced by industrial emissions, Part I: Study area description, data set acquisition and qualitative data analysis of the data set. Sci Total Environ 2007; submitted as companion manuscript.) the study area, acquisition of the one-year data set and qualitative analysis of the data set have been described. In Part II a source profile has been established for each activity present in the study area: 6 profiles (urban heating, solvent use, natural gas leakage, biogenic emissions, gasoline evaporation and vehicle exhaust) have been extracted from literature to characterise urban sources, 7 industrial profiles have been established via canister sampling around industrial plants (hydrocarbon cracking, oil refinery, hydrocarbon storage, lubricant storage, lubricant refinery, surface treatment and metallurgy). The CMB model is briefly described and its implementation is discussed through the selection of source profiles and fitting species. Main results of CMB modellings for the Dunkerque area are presented. (1) The daily evolution of source contributions for the urban wind sector shows that the vehicle exhaust source contribution varies between 40 and 55% and its relative increase at traffic rush hours is hardly perceptible. (2) The relative contribution of vehicle exhaust varies from 55% in winter down to 30% in summer. This decrease is due to the increase of the relative contribution of hydrocarbon storage source reaching up to 20% in summer. (3) The evolution of source contributions with wind directions has confirmed that in urban wind sectors the contribution of vehicle exhaust dominate with around 45-55%. For the other wind sectors that include some industrial plants, the contribution of industrial sources is around 60% and could reach 80% for the sector 280-310 degrees , which corresponds to the most dense industrial area. (4) The pollution in Dunkerque has been globally characterised taking into account the frequency of wind directions and contributions of sources in each wind direction for the whole year. It has been concluded that contribution of industrial sources is below 20% whereas vehicle exhaust contribution is superior to 40%.

A polarimetric investigation of Jupiter: Disk-resolved imaging polarimetry and spectropolarimetry

NASA Astrophysics Data System (ADS)

McLean, W.; Stam, D. M.; Bagnulo, S.; Borisov, G.; Devogèle, M.; Cellino, A.; Rivet, J. P.; Bendjoya, P.; Vernet, D.; Paolini, G.; Pollacco, D.

2017-05-01

Context. Polarimetry is a powerful remote sensing tool to characterise solar system planets and, potentially, to detect and characterise exoplanets. The linear polarisation of a planet as a function of wavelength and phase angle is sensitive to the cloud and haze particle properties in planetary atmospheres, as well as to their altitudes and optical thicknesses. Aims: We present for the first time polarimetric signals of Jupiter mapped over the entire disk, showing features such as contrasts between the belts and zones, the polar regions, and the Great Red Spot. We investigate the use of these maps for atmospheric characterisation and discuss the potential application of polarimetry to the study of the atmospheres of exoplanets. Methods: We have obtained polarimetric images of Jupiter, in the B, V, and R filters, over a phase angle range of α = 4°-10.5°. In addition, we have obtained two spectropolarimetric datasets, over the wavelength range 500-850 nm. An atmospheric model was sought for all of the datasets, which was consistent with the observed behaviour over the wavelength and phase angle range. Results: The polarimetric maps show clear latitudinal structure, with increasing polarisation towards the polar regions, in all filters. The spectropolarimetric datasets show a decrease in polarisation as a function of wavelength along with changes in the polarisation in methane absorption bands. A model fit was achieved by varying the cloud height and haze optical thickness; this can roughly produce the variation across latitude for the V and R filters, but not for the B filter data. The same model particles are also able to produce a close fit to the spectropolarimetric data. The atmosphere of Jupiter is known to be complex in structure, and data taken at intermediate phase angles (unreachable for Earth-based telescopes) seems essential for a complete characterisation of the atmospheric constituents. Because exoplanets orbit other stars, they are observable at intermediate phase angles and thus promise to be better targets for Earth-based polarimetry. Based on data obtained with ToPol at the one-metre "Omicron" (West) telescope of the C2PU (Centre Pédagogique Planète et Univers) facility (Calern plateau, Observatoire de la Côte d'Azur, France), and FoReRo2, at the two-metre RCC telescope of the Rozhen National Astronomical Observatory, Bulgaria.

Health risks of climate change: an assessment of uncertainties and its implications for adaptation policies.

PubMed

Wardekker, J Arjan; de Jong, Arie; van Bree, Leendert; Turkenburg, Wim C; van der Sluijs, Jeroen P

2012-09-19

Projections of health risks of climate change are surrounded with uncertainties in knowledge. Understanding of these uncertainties will help the selection of appropriate adaptation policies. We made an inventory of conceivable health impacts of climate change, explored the type and level of uncertainty for each impact, and discussed its implications for adaptation policy. A questionnaire-based expert elicitation was performed using an ordinal scoring scale. Experts were asked to indicate the level of precision with which health risks can be estimated, given the present state of knowledge. We assessed the individual scores, the expertise-weighted descriptive statistics, and the argumentation given for each score. Suggestions were made for how dealing with uncertainties could be taken into account in climate change adaptation policy strategies. The results showed that the direction of change could be indicated for most anticipated health effects. For several potential effects, too little knowledge exists to indicate whether any impact will occur, or whether the impact will be positive or negative. For several effects, rough 'order-of-magnitude' estimates were considered possible. Factors limiting health impact quantification include: lack of data, multi-causality, unknown impacts considering a high-quality health system, complex cause-effect relations leading to multi-directional impacts, possible changes of present-day response-relations, and difficulties in predicting local climate impacts. Participants considered heat-related mortality and non-endemic vector-borne diseases particularly relevant for climate change adaptation. For possible climate related health impacts characterised by ignorance, adaptation policies that focus on enhancing the health system's and society's capability of dealing with possible future changes, uncertainties and surprises (e.g. through resilience, flexibility, and adaptive capacity) are most appropriate. For climate related health effects for which rough risk estimates are available, 'robust decision-making' is recommended. For health effects with limited societal and policy relevance, we recommend focusing on no-regret measures. For highly relevant health effects, precautionary measures can be considered. This study indicated that analysing and characterising uncertainty by means of a typology can be a very useful approach for selection and prioritization of preferred adaptation policies to reduce future climate related health risks.

Raoultella sp. SM1, a novel iron-reducing and uranium-precipitating strain.

PubMed

Sklodowska, Aleksandra; Mielnicki, Sebastian; Drewniak, Lukasz

2018-03-01

The main aim of this study was the characterisation of novel Raoutella isolate, an iron-reducing and uranium-precipitating strain, originating from microbial mats occurring in the sediments of a closed down uranium mine in Kowary (SW Poland). Characterisation was done in the context of its potential role in the functioning of these mats and the possibility to use them in uranium removal/recovery processes. In our experiment, we observed the biological precipitation of iron and uranium's secondary minerals containing oxygen, potassium, sodium and phosphor, which were identified as ningyoite-like minerals. The isolated strain, Raoultella sp. SM1, was also able to dissimilatory reduce iron (III) and uranium (VI) in the presence of citrate as an electron donor. Our studies allowed us to characterise a new strain which may be used as a model microorganism in the study of Fe and U respiratory processes and which may be useful in the bioremediation of uranium-contaminated waters and sediments. During this process, uranium may be immobilised in ningyoite-like minerals and can then be recovered in nano/micro-particle form, which may be easily transformed to uraninite. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effect of image scaling and segmentation in digital rock characterisation

NASA Astrophysics Data System (ADS)

Jones, B. D.; Feng, Y. T.

2016-04-01

Digital material characterisation from microstructural geometry is an emerging field in computer simulation. For permeability characterisation, a variety of studies exist where the lattice Boltzmann method (LBM) has been used in conjunction with computed tomography (CT) imaging to simulate fluid flow through microscopic rock pores. While these previous works show that the technique is applicable, the use of binary image segmentation and the bounceback boundary condition results in a loss of grain surface definition when the modelled geometry is compared to the original CT image. We apply the immersed moving boundary (IMB) condition of Noble and Torczynski as a partial bounceback boundary condition which may be used to better represent the geometric definition provided by a CT image. The IMB condition is validated against published work on idealised porous geometries in both 2D and 3D. Following this, greyscale image segmentation is applied to a CT image of Diemelstadt sandstone. By varying the mapping of CT voxel densities to lattice sites, it is shown that binary image segmentation may underestimate the true permeability of the sample. A CUDA-C-based code, LBM-C, was developed specifically for this work and leverages GPU hardware in order to carry out computations.

Radar image and data fusion for natural hazards characterisation

USGS Publications Warehouse

Lu, Zhong; Dzurisin, Daniel; Jung, Hyung-Sup; Zhang, Jixian; Zhang, Yonghong

2010-01-01

Fusion of synthetic aperture radar (SAR) images through interferometric, polarimetric and tomographic processing provides an all - weather imaging capability to characterise and monitor various natural hazards. This article outlines interferometric synthetic aperture radar (InSAR) processing and products and their utility for natural hazards characterisation, provides an overview of the techniques and applications related to fusion of SAR/InSAR images with optical and other images and highlights the emerging SAR fusion technologies. In addition to providing precise land - surface digital elevation maps, SAR - derived imaging products can map millimetre - scale elevation changes driven by volcanic, seismic and hydrogeologic processes, by landslides and wildfires and other natural hazards. With products derived from the fusion of SAR and other images, scientists can monitor the progress of flooding, estimate water storage changes in wetlands for improved hydrological modelling predictions and assessments of future flood impacts and map vegetation structure on a global scale and monitor its changes due to such processes as fire, volcanic eruption and deforestation. With the availability of SAR images in near real - time from multiple satellites in the near future, the fusion of SAR images with other images and data is playing an increasingly important role in understanding and forecasting natural hazards.

Global tidal phasing potential

NASA Astrophysics Data System (ADS)

Neill, S. P.; Cooper, M. M.; Lewis, M. J.

2016-02-01

Tidal energy is characterised by intermittency over a range of timescales, from semi-diurnal and lunar periods through to annual and decadal. Therefore, the electricity that can be generated by the tides will be characterised by similar scales of intermittency. However, with knowledge of the phase relationship between sites, it may be possible to reduce intermittency, particularly at the semi-diurnal timescale, by aggregating the electricity generated by discrete regions suitable for the conversion of tidal energy into electricity. In this study, we make use of a global tidal atlas (FES2012) to make a preliminary assessment of regions of the globe where it could be possible to combine the electricity generated at a number of discrete sites to provide firmer power to regional electricity networks. In contrast to the northwest European shelf, where the high tidal stream sites tend to either be in phase or 180 out-of-phase with one-another, we find numerous regions around the globe with potential for regional tidal phasing. However, development of higher resolution regional models, or the examination of field data, are required to fully characterise the phasing potential of these regions. In addition, technical and economical constraints on the resource should be considered such as water depth and distance to shore.

Optimising a modified free-space permittivity characterisation method for civil engineering applications

NASA Astrophysics Data System (ADS)

Muller, Wayne; Scheuermann, Alexander

2016-04-01

Measuring the electrical permittivity of civil engineering materials is important for a range of ground penetrating radar (GPR) and pavement moisture measurement applications. Compacted unbound granular (UBG) pavement materials present a number of preparation and measurement challenges using conventional characterisation techniques. As an alternative to these methods, a modified free-space (MFS) characterisation approach has previously been investigated. This paper describes recent work to optimise and validate the MFS technique. The research included finite difference time domain (FDTD) modelling to better understand the nature of wave propagation within material samples and the test apparatus. This research led to improvements in the test approach and optimisation of sample sizes. The influence of antenna spacing and sample thickness on the permittivity results was investigated by a series of experiments separating antennas and measuring samples of nylon and water. Permittivity measurements of samples of nylon and water approximately 100 mm and 170 mm thick were also compared, showing consistent results. These measurements also agreed well with surface probe measurements of the nylon sample and literature values for water. The results indicate permittivity estimates of acceptable accuracy can be obtained using the proposed approach, apparatus and sample sizes.

Cogeneration computer model assessment: Advanced cogeneration research study

NASA Technical Reports Server (NTRS)

Rosenberg, L.

1983-01-01

Cogeneration computer simulation models to recommend the most desirable models or their components for use by the Southern California Edison Company (SCE) in evaluating potential cogeneration projects was assessed. Existing cogeneration modeling capabilities are described, preferred models are identified, and an approach to the development of a code which will best satisfy SCE requirements is recommended. Five models (CELCAP, COGEN 2, CPA, DEUS, and OASIS) are recommended for further consideration.

Hot news recommendation system from heterogeneous websites based on bayesian model.

PubMed

Xia, Zhengyou; Xu, Shengwu; Liu, Ningzhong; Zhao, Zhengkang

2014-01-01

The most current news recommendations are suitable for news which comes from a single news website, not for news from different heterogeneous news websites. Previous researches about news recommender systems based on different strategies have been proposed to provide news personalization services for online news readers. However, little research work has been reported on utilizing hundreds of heterogeneous news websites to provide top hot news services for group customers (e.g., government staffs). In this paper, we propose a hot news recommendation model based on Bayesian model, which is from hundreds of different news websites. In the model, we determine whether the news is hot news by calculating the joint probability of the news. We evaluate and compare our proposed recommendation model with the results of human experts on the real data sets. Experimental results demonstrate the reliability and effectiveness of our method. We also implement this model in hot news recommendation system of Hangzhou city government in year 2013, which achieves very good results.

Hot News Recommendation System from Heterogeneous Websites Based on Bayesian Model

PubMed Central

Xia, Zhengyou; Xu, Shengwu; Liu, Ningzhong; Zhao, Zhengkang

2014-01-01

The most current news recommendations are suitable for news which comes from a single news website, not for news from different heterogeneous news websites. Previous researches about news recommender systems based on different strategies have been proposed to provide news personalization services for online news readers. However, little research work has been reported on utilizing hundreds of heterogeneous news websites to provide top hot news services for group customers (e.g., government staffs). In this paper, we propose a hot news recommendation model based on Bayesian model, which is from hundreds of different news websites. In the model, we determine whether the news is hot news by calculating the joint probability of the news. We evaluate and compare our proposed recommendation model with the results of human experts on the real data sets. Experimental results demonstrate the reliability and effectiveness of our method. We also implement this model in hot news recommendation system of Hangzhou city government in year 2013, which achieves very good results. PMID:25093207

A Collaborative Location Based Travel Recommendation System through Enhanced Rating Prediction for the Group of Users.

PubMed

Ravi, Logesh; Vairavasundaram, Subramaniyaswamy

2016-01-01

Rapid growth of web and its applications has created a colossal importance for recommender systems. Being applied in various domains, recommender systems were designed to generate suggestions such as items or services based on user interests. Basically, recommender systems experience many issues which reflects dwindled effectiveness. Integrating powerful data management techniques to recommender systems can address such issues and the recommendations quality can be increased significantly. Recent research on recommender systems reveals an idea of utilizing social network data to enhance traditional recommender system with better prediction and improved accuracy. This paper expresses views on social network data based recommender systems by considering usage of various recommendation algorithms, functionalities of systems, different types of interfaces, filtering techniques, and artificial intelligence techniques. After examining the depths of objectives, methodologies, and data sources of the existing models, the paper helps anyone interested in the development of travel recommendation systems and facilitates future research direction. We have also proposed a location recommendation system based on social pertinent trust walker (SPTW) and compared the results with the existing baseline random walk models. Later, we have enhanced the SPTW model for group of users recommendations. The results obtained from the experiments have been presented.

Optimising the combination dosing strategy of abemaciclib and vemurafenib in BRAF-mutated melanoma xenograft tumours.

PubMed

Tate, Sonya C; Burke, Teresa F; Hartman, Daisy; Kulanthaivel, Palaniappan; Beckmann, Richard P; Cronier, Damien M

2016-03-15

Resistance to BRAF inhibition is a major cause of treatment failure for BRAF-mutated metastatic melanoma patients. Abemaciclib, a cyclin-dependent kinase 4 and 6 inhibitor, overcomes this resistance in xenograft tumours and offers a promising drug combination. The present work aims to characterise the quantitative pharmacology of the abemaciclib/vemurafenib combination using a semimechanistic pharmacokinetic/pharmacodynamic modelling approach and to identify an optimum dosing regimen for potential clinical evaluation. A PK/biomarker model was developed to connect abemaciclib/vemurafenib concentrations to changes in MAPK and cell cycle pathway biomarkers in A375 BRAF-mutated melanoma xenografts. Resultant tumour growth inhibition was described by relating (i) MAPK pathway inhibition to apoptosis, (ii) mitotic cell density to tumour growth and, under resistant conditions, (iii) retinoblastoma protein inhibition to cell survival. The model successfully described vemurafenib/abemaciclib-mediated changes in MAPK pathway and cell cycle biomarkers. Initial tumour shrinkage by vemurafenib, acquisition of resistance and subsequent abemaciclib-mediated efficacy were successfully captured and externally validated. Model simulations illustrate the benefit of intermittent vemurafenib therapy over continuous treatment, and indicate that continuous abemaciclib in combination with intermittent vemurafenib offers the potential for considerable tumour regression. The quantitative pharmacology of the abemaciclib/vemurafenib combination was successfully characterised and an optimised, clinically-relevant dosing strategy was identified.

Modelling anaerobic co-digestion in Benchmark Simulation Model No. 2: Parameter estimation, substrate characterisation and plant-wide integration.

PubMed

Arnell, Magnus; Astals, Sergi; Åmand, Linda; Batstone, Damien J; Jensen, Paul D; Jeppsson, Ulf

2016-07-01

Anaerobic co-digestion is an emerging practice at wastewater treatment plants (WWTPs) to improve the energy balance and integrate waste management. Modelling of co-digestion in a plant-wide WWTP model is a powerful tool to assess the impact of co-substrate selection and dose strategy on digester performance and plant-wide effects. A feasible procedure to characterise and fractionate co-substrates COD for the Benchmark Simulation Model No. 2 (BSM2) was developed. This procedure is also applicable for the Anaerobic Digestion Model No. 1 (ADM1). Long chain fatty acid inhibition was included in the ADM1 model to allow for realistic modelling of lipid rich co-substrates. Sensitivity analysis revealed that, apart from the biodegradable fraction of COD, protein and lipid fractions are the most important fractions for methane production and digester stability, with at least two major failure modes identified through principal component analysis (PCA). The model and procedure were tested on bio-methane potential (BMP) tests on three substrates, each rich on carbohydrates, proteins or lipids with good predictive capability in all three cases. This model was then applied to a plant-wide simulation study which confirmed the positive effects of co-digestion on methane production and total operational cost. Simulations also revealed the importance of limiting the protein load to the anaerobic digester to avoid ammonia inhibition in the digester and overloading of the nitrogen removal processes in the water train. In contrast, the digester can treat relatively high loads of lipid rich substrates without prolonged disturbances. Copyright © 2016 Elsevier Ltd. All rights reserved.

Building a new predictor for multiple linear regression technique-based corrective maintenance turnaround time.

PubMed

Cruz, Antonio M; Barr, Cameron; Puñales-Pozo, Elsa

2008-01-01

This research's main goals were to build a predictor for a turnaround time (TAT) indicator for estimating its values and use a numerical clustering technique for finding possible causes of undesirable TAT values. The following stages were used: domain understanding, data characterisation and sample reduction and insight characterisation. Building the TAT indicator multiple linear regression predictor and clustering techniques were used for improving corrective maintenance task efficiency in a clinical engineering department (CED). The indicator being studied was turnaround time (TAT). Multiple linear regression was used for building a predictive TAT value model. The variables contributing to such model were clinical engineering department response time (CE(rt), 0.415 positive coefficient), stock service response time (Stock(rt), 0.734 positive coefficient), priority level (0.21 positive coefficient) and service time (0.06 positive coefficient). The regression process showed heavy reliance on Stock(rt), CE(rt) and priority, in that order. Clustering techniques revealed the main causes of high TAT values. This examination has provided a means for analysing current technical service quality and effectiveness. In doing so, it has demonstrated a process for identifying areas and methods of improvement and a model against which to analyse these methods' effectiveness.

Artificial nose, NIR and UV-visible spectroscopy for the characterisation of the PDO Chianti Classico olive oil.

PubMed

Forina, M; Oliveri, P; Bagnasco, L; Simonetti, R; Casolino, M C; Nizzi Grifi, F; Casale, M

2015-11-01

An authentication study of the Italian PDO (Protected Designation of Origin) olive oil Chianti Classico, based on artificial nose, near-infrared and UV-visible spectroscopy, with a set of samples representative of the whole Chianti Classico production area and a considerable number of samples from other Italian PDO regions was performed. The signals provided by the three analytical techniques were used both individually and jointly, after fusion of the respective variables, in order to build a model for the Chianti Classico PDO olive oil. Different signal pre-treatments were performed in order to investigate their importance and their effects in enhancing and extracting information from experimental data, correcting backgrounds or removing baseline variations. Stepwise-Linear Discriminant Analysis (STEP-LDA) was used as a feature selection technique and, afterward, Linear Discriminant Analysis (LDA) and the class-modelling technique Quadratic Discriminant Analysis-UNEQual dispersed classes (QDA-UNEQ) were applied to sub-sets of selected variables, in order to obtain efficient models capable of characterising the extra virgin olive oils produced in the Chianti Classico PDO area. Copyright © 2015 Elsevier B.V. All rights reserved.

Asymptotic theory of time-varying social networks with heterogeneous activity and tie allocation.

PubMed

Ubaldi, Enrico; Perra, Nicola; Karsai, Márton; Vezzani, Alessandro; Burioni, Raffaella; Vespignani, Alessandro

2016-10-24

The dynamic of social networks is driven by the interplay between diverse mechanisms that still challenge our theoretical and modelling efforts. Amongst them, two are known to play a central role in shaping the networks evolution, namely the heterogeneous propensity of individuals to i) be socially active and ii) establish a new social relationships with their alters. Here, we empirically characterise these two mechanisms in seven real networks describing temporal human interactions in three different settings: scientific collaborations, Twitter mentions, and mobile phone calls. We find that the individuals' social activity and their strategy in choosing ties where to allocate their social interactions can be quantitatively described and encoded in a simple stochastic network modelling framework. The Master Equation of the model can be solved in the asymptotic limit. The analytical solutions provide an explicit description of both the system dynamic and the dynamical scaling laws characterising crucial aspects about the evolution of the networks. The analytical predictions match with accuracy the empirical observations, thus validating the theoretical approach. Our results provide a rigorous dynamical system framework that can be extended to include other processes shaping social dynamics and to generate data driven predictions for the asymptotic behaviour of social networks.

Asymptotic theory of time-varying social networks with heterogeneous activity and tie allocation

NASA Astrophysics Data System (ADS)

Ubaldi, Enrico; Perra, Nicola; Karsai, Márton; Vezzani, Alessandro; Burioni, Raffaella; Vespignani, Alessandro

2016-10-01

The dynamic of social networks is driven by the interplay between diverse mechanisms that still challenge our theoretical and modelling efforts. Amongst them, two are known to play a central role in shaping the networks evolution, namely the heterogeneous propensity of individuals to i) be socially active and ii) establish a new social relationships with their alters. Here, we empirically characterise these two mechanisms in seven real networks describing temporal human interactions in three different settings: scientific collaborations, Twitter mentions, and mobile phone calls. We find that the individuals’ social activity and their strategy in choosing ties where to allocate their social interactions can be quantitatively described and encoded in a simple stochastic network modelling framework. The Master Equation of the model can be solved in the asymptotic limit. The analytical solutions provide an explicit description of both the system dynamic and the dynamical scaling laws characterising crucial aspects about the evolution of the networks. The analytical predictions match with accuracy the empirical observations, thus validating the theoretical approach. Our results provide a rigorous dynamical system framework that can be extended to include other processes shaping social dynamics and to generate data driven predictions for the asymptotic behaviour of social networks.

Nanoscale reference materials for environmental, health and safety measurements: needs, gaps and opportunities.

PubMed

Stefaniak, Aleksandr B; Hackley, Vincent A; Roebben, Gert; Ehara, Kensei; Hankin, Steve; Postek, Michael T; Lynch, Iseult; Fu, Wei-En; Linsinger, Thomas P J; Thünemann, Andreas F

2013-12-01

The authors critically reviewed published lists of nano-objects and their physico-chemical properties deemed important for risk assessment and discussed metrological challenges associated with the development of nanoscale reference materials (RMs). Five lists were identified that contained 25 (classes of) nano-objects; only four (gold, silicon dioxide, silver, titanium dioxide) appeared on all lists. Twenty-three properties were identified for characterisation; only (specific) surface area appeared on all lists. The key themes that emerged from this review were: 1) various groups have prioritised nano-objects for development as "candidate RMs" with limited consensus; 2) a lack of harmonised terminology hinders accurate description of many nano-object properties; 3) many properties identified for characterisation are ill-defined or qualitative and hence are not metrologically traceable; 4) standardised protocols are critically needed for characterisation of nano-objects as delivered in relevant media and as administered to toxicological models; 5) the measurement processes being used to characterise a nano-object must be understood because instruments may measure a given sample in a different way; 6) appropriate RMs should be used for both accurate instrument calibration and for more general testing purposes (e.g., protocol validation); 7) there is a need to clarify that where RMs are not available, if "(representative) test materials" that lack reference or certified values may be useful for toxicology testing and 8) there is a need for consensus building within the nanotechnology and environmental, health and safety communities to prioritise RM needs and better define the required properties and (physical or chemical) forms of the candidate materials.

Flexible Learning Itineraries Based on Conceptual Maps

ERIC Educational Resources Information Center

Agudelo, Olga Lucía; Salinas, Jesús

2015-01-01

The use of learning itineraries based on conceptual maps is studied in order to propose a more flexible instructional design that strengthens the learning process focused on the student, generating non-linear processes, characterising its elements, setting up relationships between them and shaping a general model with specifications for each…

Knowledge Creation in Construction Organisations: A Case Approach

ERIC Educational Resources Information Center

Eliufoo, Harriet

2008-01-01

Purpose: The purpose of this paper is to investigate and characterise the knowledge creation process in construction organisations and explore to what extent organisations facilitate the process. Design/methodology/approach: A case study approach is adopted using four construction organisations; a knowledge creation model is also used as the…

Knowledge Production in Small and Medium Sized Enterprises

ERIC Educational Resources Information Center

Van der Meer, Han

2010-01-01

This article presents the author's response to Hisham B. Ghassib's (2010) article entitled "Where Does Creativity Fit into a Productivist Industrial Model of Knowledge Production?" When the author tries to characterise Ghassib's (2010) world, three words come into mind: University, Scientific Knowledge, and Marx. The author's world on the other…

Characterising Work-Based Learning as a Triadic Learning Endeavour

ERIC Educational Resources Information Center

Dalrymple, Roger; Kemp, Chris; Smith, Patrick

2014-01-01

With work-based learning (WBL) forming an increasingly prevalent dimension of modern higher education practice, conceptual models of the pedagogies underpinning WBL are increasingly emerging. There is broadening recognition of the need to capture and represent the values and presuppositions underlying WBL in order to support facilitators and…

Australian Home Education: A Model

ERIC Educational Resources Information Center

Barratt-Peacock, John

2003-01-01

If home education is not just school in another place, how can we conceptualise it and how does it work? This paper considers the peculiar set of relationships that characterise home-educating families and traces their extension out into the wider community. It further shows how, through the ongoing family conversation, experiences gained from…

The Nordic Model of Lifelong Learning

ERIC Educational Resources Information Center

Rubenson, Kjell

2006-01-01

This article explores how the so called Nordic welfare state, with its specific institutional make up, handles Lifelong Learning in a time characterised by the challenges of economic globalisation and the hegemonic impact of the neo-liberal agenda. The analysis reveals a high participation in the Nordic countries in Lifelong Learning and, in…

Instructional Responsibility in Mathematics Education: Modelling Classroom Teaching Using Swedish Data

ERIC Educational Resources Information Center

Hansson, Ase

2010-01-01

There is an international trend in mathematics education of antiauthoritarianism, emphasising cooperative learning and students' autonomous search for knowledge. In Sweden, this is framed by "students' independent work", characterised by only limited amounts of teacher-student and student-student interaction and communication and a low…

Particle size distribution: A key factor in estimating powder dustiness.

PubMed

López Lilao, Ana; Sanfélix Forner, Vicenta; Mallol Gasch, Gustavo; Monfort Gimeno, Eliseo

2017-12-01

A wide variety of raw materials, involving more than 20 samples of quartzes, feldspars, nephelines, carbonates, dolomites, sands, zircons, and alumina, were selected and characterised. Dustiness, i.e., a materials' tendency to generate dust on handling, was determined using the continuous drop method. These raw materials were selected to encompass a wide range of particle sizes (1.6-294 µm) and true densities (2650-4680 kg/m 3 ). The dustiness of the raw materials, i.e., their tendency to generate dust on handling, was determined using the continuous drop method. The influence of some key material parameters (particle size distribution, flowability, and specific surface area) on dustiness was assessed. In this regard, dustiness was found to be significantly affected by particle size distribution. Data analysis enabled development of a model for predicting the dustiness of the studied materials, assuming that dustiness depended on the particle fraction susceptible to emission and on the bulk material's susceptibility to release these particles. On the one hand, the developed model allows the dustiness mechanisms to be better understood. In this regard, it may be noted that relative emission increased with mean particle size. However, this did not necessarily imply that dustiness did, because dustiness also depended on the fraction of particles susceptible to be emitted. On the other hand, the developed model enables dustiness to be estimated using just the particle size distribution data. The quality of the fits was quite good and the fact that only particle size distribution data are needed facilitates industrial application, since these data are usually known by raw materials managers, thus making additional tests unnecessary. This model may therefore be deemed a key tool in drawing up efficient preventive and/or corrective measures to reduce dust emissions during bulk powder processing, both inside and outside industrial facilities. It is recommended, however, to use the developed model only if particle size, true density, moisture content, and shape lie within the studied ranges.

Kelvin-Voigt model of wave propagation in fragmented geomaterials with impact damping

NASA Astrophysics Data System (ADS)

Khudyakov, Maxim; Pasternak, Elena; Dyskin, Arcady

2017-04-01

When a wave propagates through real materials, energy dissipation occurs. The effect of loss of energy in homogeneous materials can be accounted for by using simple viscous models. However, a reliable model representing the effect in fragmented geomaterials has not been established yet. The main reason for that is a mechanism how vibrations are transmitted between the elements (fragments) in these materials. It is hypothesised that the fragments strike against each other, in the process of oscillation, and the impacts lead to the energy loss. We assume that the energy loss is well represented by the restitution coefficient. The principal element of this concept is the interaction of two adjacent blocks. We model it by a simple linear oscillator (a mass on an elastic spring) with an additional condition: each time the system travels through the neutral point, where the displacement is equal to zero, the velocity reduces by multiplying itself by the restitution coefficient, which characterises an impact of the fragments. This additional condition renders the system non-linear. We show that the behaviour of such a model averaged over times much larger than the system period can approximately be represented by a conventional linear oscillator with linear damping characterised by a damping coefficient expressible through the restitution coefficient. Based on this the wave propagation at times considerably greater than the resonance period of oscillations of the neighbouring blocks can be modelled using the Kelvin-Voigt model. The wave velocities and the dispersion relations are obtained.

Studying relationships between environment and malaria incidence in Camopi (French Guiana) through the objective selection of buffer-based landscape characterisations

PubMed Central

2011-01-01

Background Malaria remains a major health problem in French Guiana, with a mean of 3800 cases each year. A previous study in Camopi, an Amerindian village on the Oyapock River, highlighted the major contribution of environmental features to the incidence of malaria attacks. We propose a method for the objective selection of the best multivariate peridomestic landscape characterisation that maximises the chances of identifying relationships between environmental features and malaria incidence, statistically significant and meaningful from an epidemiological point of view. Methods A land-cover map, the hydrological network and the geolocalised inhabited houses were used to characterise the peridomestic landscape in eleven discoid buffers with radii of 50, 100, 200, 300, 400, 500, 600, 700, 800, 900 and 1000 metres. Buffer-based landscape characterisations were first compared in terms of their capacity to discriminate between sites within the geographic space and of their effective multidimensionality in variable space. The Akaike information criterion (AIC) was then used to select the landscape model best explaining the incidences of P. vivax and P. falciparum malaria. Finally, we calculated Pearson correlation coefficients for the relationships between environmental variables and malaria incidence, by species, for the more relevant buffers. Results The optimal buffers for environmental characterisation had radii of 100 m around houses for P. vivax and 400 m around houses for P. falciparum. The incidence of P. falciparum malaria seemed to be more strongly linked to environmental features than that of P. vivax malaria, within these buffers. The incidence of P. falciparum malaria in children was strongly correlated with proportions of bare soil (r = -0.69), land under high vegetation (r = 0.68) and primary forest (r = 0.54), landscape division (r = 0.48) and the number of inhabited houses (r = -0.60). The incidence of P. vivax malaria was associated only with landscape division (r = 0.49). Conclusions The proposed methodology provides a simple and general framework for objective characterisation of the landscape to account for field observations. The use of this method enabled us to identify different optimal observation horizons around houses, depending on the Plasmodium species considered, and to demonstrate significant correlations between environmental features and the incidence of malaria. PMID:22151738

Studying relationships between environment and malaria incidence in Camopi (French Guiana) through the objective selection of buffer-based landscape characterisations.

PubMed

Stefani, Aurélia; Roux, Emmanuel; Fotsing, Jean-Marie; Carme, Bernard

2011-12-13

Malaria remains a major health problem in French Guiana, with a mean of 3800 cases each year. A previous study in Camopi, an Amerindian village on the Oyapock River, highlighted the major contribution of environmental features to the incidence of malaria attacks. We propose a method for the objective selection of the best multivariate peridomestic landscape characterisation that maximises the chances of identifying relationships between environmental features and malaria incidence, statistically significant and meaningful from an epidemiological point of view. A land-cover map, the hydrological network and the geolocalised inhabited houses were used to characterise the peridomestic landscape in eleven discoid buffers with radii of 50, 100, 200, 300, 400, 500, 600, 700, 800, 900 and 1000 metres. Buffer-based landscape characterisations were first compared in terms of their capacity to discriminate between sites within the geographic space and of their effective multidimensionality in variable space. The Akaike information criterion (AIC) was then used to select the landscape model best explaining the incidences of P. vivax and P. falciparum malaria. Finally, we calculated Pearson correlation coefficients for the relationships between environmental variables and malaria incidence, by species, for the more relevant buffers. The optimal buffers for environmental characterisation had radii of 100 m around houses for P. vivax and 400 m around houses for P. falciparum. The incidence of P. falciparum malaria seemed to be more strongly linked to environmental features than that of P. vivax malaria, within these buffers. The incidence of P. falciparum malaria in children was strongly correlated with proportions of bare soil (r = -0.69), land under high vegetation (r = 0.68) and primary forest (r = 0.54), landscape division (r = 0.48) and the number of inhabited houses (r = -0.60). The incidence of P. vivax malaria was associated only with landscape division (r = 0.49). The proposed methodology provides a simple and general framework for objective characterisation of the landscape to account for field observations. The use of this method enabled us to identify different optimal observation horizons around houses, depending on the Plasmodium species considered, and to demonstrate significant correlations between environmental features and the incidence of malaria. © 2011 Stefani et al; licensee BioMed Central Ltd.

Application of computational methods to the design and characterisation of porous molecular materials.

PubMed

Evans, Jack D; Jelfs, Kim E; Day, Graeme M; Doonan, Christian J

2017-06-06

Composed from discrete units, porous molecular materials (PMMs) possess unique properties not observed for conventional, extended, solids, such as solution processibility and permanent porosity in the liquid phase. However, identifying the origin of porosity is not a trivial process, especially for amorphous or liquid phases. Furthermore, the assembly of molecular components is typically governed by a subtle balance of weak intermolecular forces that makes structure prediction challenging. Accordingly, in this review we canvass the crucial role of molecular simulations in the characterisation and design of PMMs. We will outline strategies for modelling porosity in crystalline, amorphous and liquid phases and also describe the state-of-the-art methods used for high-throughput screening of large datasets to identify materials that exhibit novel performance characteristics.

Probabilistic seismic hazard analysis for a nuclear power plant site in southeast Brazil

NASA Astrophysics Data System (ADS)

de Almeida, Andréia Abreu Diniz; Assumpção, Marcelo; Bommer, Julian J.; Drouet, Stéphane; Riccomini, Claudio; Prates, Carlos L. M.

2018-05-01

A site-specific probabilistic seismic hazard analysis (PSHA) has been performed for the only nuclear power plant site in Brazil, located 130 km southwest of Rio de Janeiro at Angra dos Reis. Logic trees were developed for both the seismic source characterisation and ground-motion characterisation models, in both cases seeking to capture the appreciable ranges of epistemic uncertainty with relatively few branches. This logic-tree structure allowed the hazard calculations to be performed efficiently while obtaining results that reflect the inevitable uncertainty in long-term seismic hazard assessment in this tectonically stable region. An innovative feature of the study is an additional seismic source zone added to capture the potential contributions of characteristics earthquake associated with geological faults in the region surrounding the coastal site.

A cohort study of Danish patients with interstitial lung diseases: burden, severity, treatment and survival.

PubMed

Hyldgaard, Charlotte

2015-04-01

Interstitial lung diseases (ILDs) form a heterogeneous group of rare diseases characterised by varying degrees of pulmonary inflammation and fibrosis. We hypothesised that IPF and unclassifiable ILD were common in a Danish ILD cohort and that prognostic factors based on disease characteristics and comorbidities could be identified The aims of the PhD study were to describe the demographics of ILD in Central Denmark, to characterise the distribution of ILD diagnoses, and to assess prognostic factors in IPF and unclassifiable ILD. The study is based on a cohort of 431 ILD patients referred to our department during a 6-year period. All ILD diagnoses were re-evaluated according to current diagnostic criteria. Patients were followed from the time of first visit on suspicion of an ILD to the last visit to the centre, death, transplantation, or discharge from follow-up. The incidence of ILD was 4.1 per 100,000 inhabitants, and the incidence of IPF was 1.3 per 100,000 inhabitants in Central Den-mark. The most frequently occurring ILDs were IPF (28%), unclassifiable ILDs (extensive fibrotic disease and other unclassifiable ILDs) (24%), connective tissue disease-related ILD (14%), hyper-sensitivity pneumonitis (7%) and NSIP (7%). Cardiovascular dis-ease was present in 21% of the patients. The presence of cardio-vascular disease at the time of IPF diagnosis did not lead to increased mortality, whereas cardiovascular disease diagnosed during the course of IPF was a statistically significant predictor of mortality. Our study also showed that diabetes and concomitant anticoagulant therapy were associated with worse outcome in IPF, and that a simple HRCT scoring system could be used in the prediction of outcome in fibrotic ILDs. The study of unclassifiable ILD revealed two disease categories: one group characterised by extensive fibrotic disease and one characterised by more inflammatory features. The latter group was characterised by younger age and significantly better prognosis. We evaluated the pragmatic disease classification based on the clinical disease pattern included in the 2013 revision of the guidelines of diagnosis and treatment of interstitial lung diseases. We found that it was able to separate patients with unclassifiable ILD into categories with highly significant differences in survival. We also evaluated the ILD-GAP model, which is based on gender, age and pulmonary function (physiology), and found that it was a valuable predictor of survival in unclassifiable ILD. In a multivariate model, the two prediction scores showed significant individual contribution to the prognostic assessment. The present study has provided the first estimate of ILD and IPF incidence in the Danish population and has shown that demographics and survival of IPF in this cohort were comparable to what has been reported in other studies. Comorbidities were common among patients with IPF, and the results of the study have led us to believe that careful diagnosis and treatment of comorbidities are important in order to optimise outcome in patients with IPF, although our findings need to be confirmed in larger studies. Unclassifiable ILD is frequent in daily clinical practice but has not been characterised in detail. Our study showed that it was possible to identify predictors of outcome and to validate the ILD-GAP model in this cohort. The study also showed that the Disease Behaviour Classification can be used in the management of patients with unclassifiable ILD.

Efficacy and cost-effectiveness of stereotactic vacuum-assisted core biopsy of nonpalpable breast lesions: analysis of 602 biopsies performed over 5 years.

PubMed

Luparia, A; Durando, M; Campanino, P; Regini, E; Lucarelli, D; Talenti, A; Mattone, G; Mariscotti, G; Sapino, A; Gandini, G

2011-04-01

The authors sought to evaluate the diagnostic accuracy and cost-effectiveness of vacuum-assisted core biopsy (VACB) in comparison with diagnostic surgical excision for characterisation of nonpalpable breast lesions classified as Breast Imaging Reporting and Data System (BI-RADS) categories R3 and R4. From January 2004 to December 2008, we conducted 602 stereotactic, 11-gauge, VACB procedures on 243 nonpalpable breast lesions categorised as BI-RADS R3, 346 categorised as BI-RADS R4 and 13 categorised as BI-RADS R5. We calculated the diagnostic accuracy and cost savings of VACB by subtracting the cost of the stereotactic biopsy from that of the diagnostic surgical procedure. A total of 56% of the lesions were benign and required no further assessment. Lesions of uncertain malignant potential (B3) (23.6%) were debated at multidisciplinary meetings, and diagnostic surgical biopsy was recommended for 83.1% of them. All malignant lesions (B4 and B5) underwent surgical excision. VACB had a sensitivity of 94.9%, specificity of 98.3% and diagnostic accuracy of 97.7%. The cost savings per VACB procedure were 464.00 euro; by obviating 335 surgical biopsies, the overall cost savings was 155,440.00 euro over 5 years. VACB proved to have high diagnostic accuracy for characterising abnormalities at low to intermediate risk of malignancy and obviated surgical excision in about half of the cases, allowing for considerable cost savings.

LDA-Based Unified Topic Modeling for Similar TV User Grouping and TV Program Recommendation.

PubMed

Pyo, Shinjee; Kim, Eunhui; Kim, Munchurl

2015-08-01

Social TV is a social media service via TV and social networks through which TV users exchange their experiences about TV programs that they are viewing. For social TV service, two technical aspects are envisioned: grouping of similar TV users to create social TV communities and recommending TV programs based on group and personal interests for personalizing TV. In this paper, we propose a unified topic model based on grouping of similar TV users and recommending TV programs as a social TV service. The proposed unified topic model employs two latent Dirichlet allocation (LDA) models. One is a topic model of TV users, and the other is a topic model of the description words for viewed TV programs. The two LDA models are then integrated via a topic proportion parameter for TV programs, which enforces the grouping of similar TV users and associated description words for watched TV programs at the same time in a unified topic modeling framework. The unified model identifies the semantic relation between TV user groups and TV program description word groups so that more meaningful TV program recommendations can be made. The unified topic model also overcomes an item ramp-up problem such that new TV programs can be reliably recommended to TV users. Furthermore, from the topic model of TV users, TV users with similar tastes can be grouped as topics, which can then be recommended as social TV communities. To verify our proposed method of unified topic-modeling-based TV user grouping and TV program recommendation for social TV services, in our experiments, we used real TV viewing history data and electronic program guide data from a seven-month period collected by a TV poll agency. The experimental results show that the proposed unified topic model yields an average 81.4% precision for 50 topics in TV program recommendation and its performance is an average of 6.5% higher than that of the topic model of TV users only. For TV user prediction with new TV programs, the average prediction precision was 79.6%. Also, we showed the superiority of our proposed model in terms of both topic modeling performance and recommendation performance compared to two related topic models such as polylingual topic model and bilingual topic model.

Conceptual Model Learning Objects and Design Recommendations for Small Screens

ERIC Educational Resources Information Center

Churchill, Daniel

2011-01-01

This article presents recommendations for the design of conceptual models for applications via handheld devices such as personal digital assistants and some mobile phones. The recommendations were developed over a number of years through experience that involves design of conceptual models, and applications of these multimedia representations with…

DOE Office of Scientific and Technical Information (OSTI.GOV)

Part, Florian; Zecha, Gudrun; Causon, Tim

Highlights: • First review on detection of nanomaterials in complex waste samples. • Focus on nanoparticles in solid, liquid and gaseous waste samples. • Summary of current applicable methods for nanowaste detection and characterisation. • Limitations and challenges of characterisation of nanoparticles in waste. - Abstract: Engineered nanomaterials (ENMs) are already extensively used in diverse consumer products. Along the life cycle of a nano-enabled product, ENMs can be released and subsequently accumulate in the environment. Material flow models also indicate that a variety of ENMs may accumulate in waste streams. Therefore, a new type of waste, so-called nanowaste, is generatedmore » when end-of-life ENMs and nano-enabled products are disposed of. In terms of the precautionary principle, environmental monitoring of end-of-life ENMs is crucial to allow assessment of the potential impact of nanowaste on our ecosystem. Trace analysis and quantification of nanoparticulate species is very challenging because of the variety of ENM types that are used in products and low concentrations of nanowaste expected in complex environmental media. In the framework of this paper, challenges in nanowaste characterisation and appropriate analytical techniques which can be applied to nanowaste analysis are summarised. Recent case studies focussing on the characterisation of ENMs in waste streams are discussed. Most studies aim to investigate the fate of nanowaste during incineration, particularly considering aerosol measurements; whereas, detailed studies focusing on the potential release of nanowaste during waste recycling processes are currently not available. In terms of suitable analytical methods, separation techniques coupled to spectrometry-based methods are promising tools to detect nanowaste and determine particle size distribution in liquid waste samples. Standardised leaching protocols can be applied to generate soluble fractions stemming from solid wastes, while micro- and ultrafiltration can be used to enrich nanoparticulate species. Imaging techniques combined with X-ray-based methods are powerful tools for determining particle size, morphology and screening elemental composition. However, quantification of nanowaste is currently hampered due to the problem to differentiate engineered from naturally-occurring nanoparticles. A promising approach to face these challenges in nanowaste characterisation might be the application of nanotracers with unique optical properties, elemental or isotopic fingerprints. At present, there is also a need to develop and standardise analytical protocols regarding nanowaste sampling, separation and quantification. In general, more experimental studies are needed to examine the fate and transport of ENMs in waste streams and to deduce transfer coefficients, respectively to develop reliable material flow models.« less

Endometrial apoptosis and neutrophil infiltration during menstruation exhibits spatial and temporal dynamics that are recapitulated in a mouse model.

PubMed

Armstrong, Gregory M; Maybin, Jacqueline A; Murray, Alison A; Nicol, Moira; Walker, Catherine; Saunders, Philippa T K; Rossi, Adriano G; Critchley, Hilary O D

2017-12-12

Menstruation is characterised by synchronous shedding and restoration of tissue integrity. An in vivo model of menstruation is required to investigate mechanisms responsible for regulation of menstrual physiology and to investigate common pathologies such as heavy menstrual bleeding (HMB). We hypothesised that our mouse model of simulated menstruation would recapitulate the spatial and temporal changes in the inflammatory microenvironment of human menses. Three regulatory events were investigated: cell death (apoptosis), neutrophil influx and cytokine/chemokine expression. Well-characterised endometrial tissues from women were compared with uteri from a mouse model (tissue recovered 0, 4, 8, 24 and 48 h after removal of a progesterone-secreting pellet). Immunohistochemistry for cleaved caspase-3 (CC3) revealed significantly increased staining in human endometrium from late secretory and menstrual phases. In mice, CC3 was significantly increased at 8 and 24 h post-progesterone-withdrawal. Elastase + human neutrophils were maximal during menstruation; Ly6G + mouse neutrophils were maximal at 24 h. Human endometrial and mouse uterine cytokine/chemokine mRNA concentrations were significantly increased during menstrual phase and 24 h post-progesterone-withdrawal respectively. Data from dated human samples revealed time-dependent changes in endometrial apoptosis preceding neutrophil influx and cytokine/chemokine induction during active menstruation. These dynamic changes were recapitulated in the mouse model of menstruation, validating its use in menstrual research.

A population-based model for priority setting across the care continuum and across modalities

PubMed Central

Segal, Leonie; Mortimer, Duncan

2006-01-01

Background The Health-sector Wide (HsW) priority setting model is designed to shift the focus of priority setting away from 'program budgets' – that are typically defined by modality or disease-stage – and towards well-defined target populations with a particular disease/health problem. Methods The key features of the HsW model are i) a disease/health problem framework, ii) a sequential approach to covering the entire health sector, iii) comprehensiveness of scope in identifying intervention options and iv) the use of objective evidence. The HsW model redefines the unit of analysis over which priorities are set to include all mutually exclusive and complementary interventions for the prevention and treatment of each disease/health problem under consideration. The HsW model is therefore incompatible with the fragmented approach to priority setting across multiple program budgets that currently characterises allocation in many health systems. The HsW model employs standard cost-utility analyses and decision-rules with the aim of maximising QALYs contingent upon the global budget constraint for the set of diseases/health problems under consideration. It is recognised that the objective function may include non-health arguments that would imply a departure from simple QALY maximisation and that political constraints frequently limit degrees of freedom. In addressing these broader considerations, the HsW model can be modified to maximise value-weighted QALYs contingent upon the global budget constraint and any political constraints bearing upon allocation decisions. Results The HsW model has been applied in several contexts, recently to osteoarthritis, that has demonstrated both its practical application and its capacity to derive clear evidenced-based policy recommendations. Conclusion Comparisons with other approaches to priority setting, such as Programme Budgeting and Marginal Analysis (PBMA) and modality-based cost-effectiveness comparisons, as typified by Australia's Pharmaceutical Benefits Advisory Committee process for the listing of pharmaceuticals for government funding, demonstrate the value added by the HsW model notably in its greater likelihood of contributing to allocative efficiency. PMID:16566841

Evaluation of illumination system uniformity for wide-field biomedical hyperspectral imaging

NASA Astrophysics Data System (ADS)

Sawyer, Travis W.; Siri Luthman, A.; E Bohndiek, Sarah

2017-04-01

Hyperspectral imaging (HSI) systems collect both spatial (morphological) and spectral (chemical) information from a sample. HSI can provide sensitive analysis for biological and medical applications, for example, simultaneously measuring reflectance and fluorescence properties of a tissue, which together with structural information could improve early cancer detection and tumour characterisation. Illumination uniformity is a critical pre-condition for quantitative data extraction from an HSI system. Non-uniformity can cause glare, specular reflection and unwanted shading, which negatively impact statistical analysis procedures used to extract abundance of different chemical species. Here, we model and evaluate several illumination systems frequently used in wide-field biomedical imaging to test their potential for HSI. We use the software LightTools and FRED. The analysed systems include: a fibre ring light; a light emitting diode (LED) ring; and a diffuse scattering dome. Each system is characterised for spectral, spatial, and angular uniformity, as well as transfer efficiency. Furthermore, an approach to measure uniformity using the Kullback-Leibler divergence (KLD) is introduced. The KLD is generalisable to arbitrary illumination shapes, making it an attractive approach for characterising illumination distributions. Although the systems are quite comparable in their spatial and spectral uniformity, the most uniform angular distribution is achieved using a diffuse scattering dome, yielding a contrast of 0.503 and average deviation of 0.303 over a ±60° field of view with a 3.9% model error in the angular domain. Our results suggest that conventional illumination sources can be applied in HSI, but in the case of low light levels, bespoke illumination sources may offer improved performance.

Characterising invasive non-native Rhododendron ponticum spectra signatures with spectroradiometry in the laboratory and field: Potential for remote mapping

NASA Astrophysics Data System (ADS)

Taylor, Sarah L.; Hill, Ross A.; Edwards, Colin

2013-07-01

Compared with traditional ground surveys, remote sensing has the potential to map the spatial extent of non-native invasive species rapidly and reliably. This paper assesses the potential of spectroradiometry to distinguish and characterise the status of invasive non-native rhododendron (Rhododendron ponticum). Absolute reflectance of target plant material was measured with an ASD Fieldspec Pro System under standardised laboratory conditions and in the field to characterise spectral signatures in the winter, during leaf-off conditions for woodland overstory, and in the summer when mature rhododendrons are flowering. A logistic regression model of absolute reflectance at key wavelengths (490, 550, 610, 1040 and 1490 nm) was used to determine the success of discriminating rhododendron from three other shrubby species likely to be encountered in woodlands during the winter. The logistic regression model was highly significant (p < 0.001), with 93.5% of 246 leaf sets correctly identified as rhododendron or non-rhododendron (i.e. cherry laurel (Prunus laurocerasus), holly (Ilex aquifolium), and beech (Fagus sylvatica)). Rescaling the data to emulate the spectral resolution of airborne and satellite acquired data decreased the total success rate of correctly identifying rhododendron by only 0.4%; although this error rate will likely increase for airborne or satellite data as a result of atmospheric attenuation and reduced spatial resolution. This demonstrates the potential to map bush presence using hyperspectral data and indicates the optimum spectral wavelengths required. Such information is critical to the development of successful strategic management plans to eradicate rhododendron (and the associated Phytophthora ramorum pathogen) effectively from a site.

Suitability of a PLCL fibrous scaffold for soft tissue engineering applications: A combined biological and mechanical characterisation.

PubMed

Laurent, Cédric P; Vaquette, Cédryck; Liu, Xing; Schmitt, Jean-François; Rahouadj, Rachid

2018-04-01

Poly(lactide-co-ε-caprolactone) (PLCL) has been reported to be a good candidate for tissue engineering because of its good biocompatibility. Particularly, a braided PLCL scaffold (PLL/PCL ratio = 85/15) has been recently designed and partially validated for ligament tissue engineering. In the present study, we assessed the in vivo biocompatibility of acellular and cellularised scaffolds in a rat model. We then determined its in vitro biocompatibility using stem cells issued from both bone marrow and Wharton Jelly. From a biological point of view, the scaffold was shown to be suitable for tissue engineering in all these cases. Secondly, while the initial mechanical properties of this scaffold have been previously reported to be adapted to load-bearing applications, we studied the evolution in time of the mechanical properties of PLCL fibres due to hydrolytic degradation. Results for isolated PLCL fibres were extrapolated to the fibrous scaffold using a previously developed numerical model. It was shown that no accumulation of plastic strain was to be expected for a load-bearing application such as anterior cruciate ligament tissue engineering. However, PLCL fibres exhibited a non-expected brittle behaviour after two months. This may involve a potential risk of premature failure of the scaffold, unless tissue growth compensates this change in mechanical properties. This combined study emphasises the need to characterise the properties of biomaterials in a pluridisciplinary approach, since biological and mechanical characterisations led in this case to different conclusions concerning the suitability of this scaffold for load-bearing applications.

Development of the Global Earthquake Model’s neotectonic fault database

USGS Publications Warehouse

Christophersen, Annemarie; Litchfield, Nicola; Berryman, Kelvin; Thomas, Richard; Basili, Roberto; Wallace, Laura; Ries, William; Hayes, Gavin P.; Haller, Kathleen M.; Yoshioka, Toshikazu; Koehler, Richard D.; Clark, Dan; Wolfson-Schwehr, Monica; Boettcher, Margaret S.; Villamor, Pilar; Horspool, Nick; Ornthammarath, Teraphan; Zuñiga, Ramon; Langridge, Robert M.; Stirling, Mark W.; Goded, Tatiana; Costa, Carlos; Yeats, Robert

2015-01-01

The Global Earthquake Model (GEM) aims to develop uniform, openly available, standards, datasets and tools for worldwide seismic risk assessment through global collaboration, transparent communication and adapting state-of-the-art science. GEM Faulted Earth (GFE) is one of GEM’s global hazard module projects. This paper describes GFE’s development of a modern neotectonic fault database and a unique graphical interface for the compilation of new fault data. A key design principle is that of an electronic field notebook for capturing observations a geologist would make about a fault. The database is designed to accommodate abundant as well as sparse fault observations. It features two layers, one for capturing neotectonic faults and fold observations, and the other to calculate potential earthquake fault sources from the observations. In order to test the flexibility of the database structure and to start a global compilation, five preexisting databases have been uploaded to the first layer and two to the second. In addition, the GFE project has characterised the world’s approximately 55,000 km of subduction interfaces in a globally consistent manner as a basis for generating earthquake event sets for inclusion in earthquake hazard and risk modelling. Following the subduction interface fault schema and including the trace attributes of the GFE database schema, the 2500-km-long frontal thrust fault system of the Himalaya has also been characterised. We propose the database structure to be used widely, so that neotectonic fault data can make a more complete and beneficial contribution to seismic hazard and risk characterisation globally.

[Huntington's disease: molecular foundations and implications in the characterisation of the neuronal mechanisms responsible for linguistic processing].

PubMed

Benítez-Burraco, A

Certain neuronal models of linguistic processing suggest that the basal ganglia play a key role in this processing, thanks to their integration within the so-called cortico-striato-cortical circuits. A comparative analysis, at a phenotypic and molecular level, of the pathologies, syndromes and disorders that entail a structural alteration and/or a dysfunction of the basal ganglia is essential for validating and optimising such models, as well as for achieving a suitable characterisation of the genetic program responsible for the development and functioning of the 'language organ'. One of the most significant pathologies in this respect is Huntington's disease, which is caused by the destruction of certain groups of neurons in the caudate nucleus. This type of analysis seems to confirm the hypothesis that, during linguistic processing, the basal ganglia would be responsible for planning and modulating the sequential tasks related to the so-called procedural (or computational or rule-applying) component of language. Equally plausible, however, is the hypothesis that, inside them, there would be regions that are specifically dedicated to processing the different (morphological and syntactical) rules that go to make up said component. Additionally, the nature of these subcortical structures and the function they perform would explain the simultaneous presence of an articulatory and a linguistic deficit in disorders in which the basal ganglia are affected. Lastly, this kind of analysis is also making it possible to characterise some of the genes that constitute the genetic program responsible for the development and functioning of this region of the brain and, by extension, of the 'language organ'.

[FOXP2 and the molecular biology of language: new evidence. I. Phenotypic aspects and animal models].

PubMed

Benítez-Burraco, A

FOXP2 is the first gene linked to a hereditary variant of specific language impairment and seems to code for a transcriptional repressor that intervenes in the regulation of development and the functioning of certain thalamic-cortical-striatal circuits. In the last three years significant progress has been made in the analysis of the structural and functional properties of the gene. The most notable advances have been made in the genotypic and phenotypic characterisation of new alterations in its sequencing in human beings; the determination in vivo of the functional properties of the mutated proteins generated from said variants; the cloning and characterisation of new orthologues of the gene; the generation of the first knockout and knockdown organisms for it; and a more precise molecular characterisation of the biological role played by the orthologues corresponding to species that are also capable of learning the articulatory patterns of the vocalisations they use to communicate. The latest clinical evidence and that obtained from analysing animal models generated to date appear to suggest the presence of a 'sensory-motor disorder' as the central deficit behind the different phenotypes associated to the different mutations of the gene in the human species, the functionality of the gene FOXP2 during development of the embryo and during the adult phase, its involvement in the development and functioning of the thalamic-cortical-striatal circuits associated to motor planning, sequential behaviour and procedural learning, and significant old age, in developmental terms, of a part of the neuroanatomical substrate that is involved in processing linguistic stimuli in our species.

Aggregation Trade Offs in Family Based Recommendations

NASA Astrophysics Data System (ADS)

Berkovsky, Shlomo; Freyne, Jill; Coombe, Mac

Personalized information access tools are frequently based on collaborative filtering recommendation algorithms. Collaborative filtering recommender systems typically suffer from a data sparsity problem, where systems do not have sufficient user data to generate accurate and reliable predictions. Prior research suggested using group-based user data in the collaborative filtering recommendation process to generate group-based predictions and partially resolve the sparsity problem. Although group recommendations are less accurate than personalized recommendations, they are more accurate than general non-personalized recommendations, which are the natural fall back when personalized recommendations cannot be generated. In this work we present initial results of a study that exploits the browsing logs of real families of users gathered in an eHealth portal. The browsing logs allowed us to experimentally compare the accuracy of two group-based recommendation strategies: aggregated group models and aggregated predictions. Our results showed that aggregating individual models into group models resulted in more accurate predictions than aggregating individual predictions into group predictions.

Personalized recommendation via an improved NBI algorithm and user influence model in a Microblog network

NASA Astrophysics Data System (ADS)

Lian, Jie; Liu, Yun; Zhang, Zhen-jiang; Gui, Chang-ni

2013-10-01

Bipartite network based recommendations have attracted extensive attentions in recent years. Differing from traditional object-oriented recommendations, the recommendation in a Microblog network has two crucial differences. One is high authority users or one’s special friends usually play a very active role in tweet-oriented recommendation. The other is that the object in a Microblog network corresponds to a set of tweets on same topic instead of an actual and single entity, e.g. goods or movies in traditional networks. Thus repeat recommendations of the tweets in one’s collected topics are indispensable. Therefore, this paper improves network based inference (NBI) algorithm by original link matrix and link weight on resource allocation processes. This paper finally proposes the Microblog recommendation model based on the factors of improved network based inference and user influence model. Adjusting the weights of these two factors could generate the best recommendation results in algorithm accuracy and recommendation personalization.

Optimized MBR for greywater reuse systems in hotel facilities.

PubMed

Atanasova, Natasa; Dalmau, Montserrat; Comas, Joaquim; Poch, Manel; Rodriguez-Roda, Ignasi; Buttiglieri, Gianluigi

2017-05-15

Greywater is an important alternative water source, particularly in semi-arid, touristic areas, where the biggest water demand is usually in the dry period. By using this source wisely, tourist facilities can substantially reduce the pressure to scarce water resources. In densely urbanized touristic areas, where space has high value, compact solutions such as MBR based greywater reuse systems appear very appropriate. This research focuses on technical and economical evaluation of such solution by implementing a pilot MBR to a hotel with separated grey water. The pilot was operated for 6 months, with thorough characterisation of the GW performed, its operation was monitored and its energy consumption was optimized by applying a control system for the air scour. Based on the pilot operation a design and economic model was set to estimate the feasibility (CAPEX, OPEX, payback period of investment) of appropriate scales of MBR based GW systems, including separation of GW, MBR technology, clean water storage and disinfection. The model takes into account water and energy prices in Spain and a planning period of 20 years. The results demonstrated an excellent performance in terms of effluent quality, while the energy demand for air-scour was reduced by up to 35.2%, compared to the manufacturer recommendations. Economical evaluation of the entire MBR based GW reuse system shows its feasibility for sizes already at 5 m 3 /day (60 PE). The payback period of the investment for hotels like the demonstration hotel, treating 30 m 3 /day is 3 years. Copyright © 2017 Elsevier Ltd. All rights reserved.

Ultrafine particles in cities.

PubMed

Kumar, Prashant; Morawska, Lidia; Birmili, Wolfram; Paasonen, Pauli; Hu, Min; Kulmala, Markku; Harrison, Roy M; Norford, Leslie; Britter, Rex

2014-05-01

Ultrafine particles (UFPs; diameter less than 100 nm) are ubiquitous in urban air, and an acknowledged risk to human health. Globally, the major source for urban outdoor UFP concentrations is motor traffic. Ongoing trends towards urbanisation and expansion of road traffic are anticipated to further increase population exposure to UFPs. Numerous experimental studies have characterised UFPs in individual cities, but an integrated evaluation of emissions and population exposure is still lacking. Our analysis suggests that the average exposure to outdoor UFPs in Asian cities is about four-times larger than that in European cities but impacts on human health are largely unknown. This article reviews some fundamental drivers of UFP emissions and dispersion, and highlights unresolved challenges, as well as recommendations to ensure sustainable urban development whilst minimising any possible adverse health impacts. Copyright © 2014 Elsevier Ltd. All rights reserved.

Non-omnia moriantur-toxicity of mancozeb on dead wood microarthropod fauna.

PubMed

Adamski, Zbigniew; Bloszyk, Jerzy; Bruin, Jan; Ziemnicki, Kazimierz

2007-01-01

The effect of Dithane M-45 (dithiocarbamate fungicide; active substance: mancozeb) was studied on microarthropod fauna inhabiting dead wood. Although the exposure was almost never 100% lethal for the majority of observed taxa, almost all (Mesostigmata, Oribatida, some Uropodina, Actinedida, Collembola and Diplopoda) showed very high correlation between concentration of the fungicide and mortality (r > 0.86). Only Stigmaeidae showed low correlation (r = 0.293). For the majority of taxa LC(50 )values were close to the concentrations used during agrochemical activities in woods. Only Trachytes aegrota showed full susceptibility to the fungicide within the range of recommended field concentrations used in forestry (characterised by the low LC(95 )value). Tolerance of mesostigmatid and oribatid mites was found to differ between juveniles and adults, but not consistently. Related Uropodina species varied in susceptibility to the fungicide.

An attempt of modelling debris flows characterised by strong inertial effects through Cellular Automata

NASA Astrophysics Data System (ADS)

Iovine, G.; D'Ambrosio, D.

2003-04-01

Cellular Automata models do represent a valid method for the simulation of complex phenomena, when these latter can be described in "a-centric" terms - i.e. through local interactions within a discrete time-space. In particular, flow-type landslides (such as debris flows) can be viewed as a-centric dynamical system. SCIDDICA S4b, the last release of a family of two-dimensional hexagonal Cellular Automata models, has recently been developed for simulating debris flows characterised by strong inertial effects. It has been derived by progressively enriching an initial simplified CA model, originally derived for simulating very simple cases of slow-moving flow-type landslides. In S4b, by applying an empirical strategy, the inertial characters of the flowing mass have been translated into CA terms. In the transition function of the model, the distribution of landslide debris among the cells is computed by considering the momentum of the debris which move among the cells of the neighbourhood, and privileging the flow direction. By properly setting the value of one of the global parameters of the model (the "inertial factor"), the mechanism of distribution of the landslide debris among the cells can be influenced in order to emphasise the inertial effects, according to the energy of the flowing mass. Moreover, the high complexity of both the model and of the phenomena to be simulated (e.g. debris flows characterised by severe erosion along their path, and by strong inertial effects) suggested to employ an automated technique of evaluation, for the determination of the best set of global parameters. Accordingly, the calibration of the model has been performed through Genetic Algorithms, by considering several real cases of study: these latter have been selected among the population of landslides triggered in Campania (Southern Italy) in May 1998 and December 1999. Obtained results are satisfying: errors computed by comparing the simulations with the map of the real landslides are smaller than those previously obtained either through previous releases of the same model or without Genetic Algorithms. Nevertheless, results are still only preliminary, as the experiments have been realised in sequential computing environment. A more efficient calibration of the model would certainly be possible by adopting a parallel environment of computing, as a great number of tests could be performed in reasonable times; moreover, the parameters' optimisation could be realised in wider ranges, and in greater detail.

Electromagnetic Modelling of MMIC CPWs for High Frequency Applications

NASA Astrophysics Data System (ADS)

Sinulingga, E. P.; Kyabaggu, P. B. K.; Rezazadeh, A. A.

2018-02-01

Realising the theoretical electrical characteristics of components through modelling can be carried out using computer-aided design (CAD) simulation tools. If the simulation model provides the expected characteristics, the fabrication process of Monolithic Microwave Integrated Circuit (MMIC) can be performed for experimental verification purposes. Therefore improvements can be suggested before mass fabrication takes place. This research concentrates on development of MMIC technology by providing accurate predictions of the characteristics of MMIC components using an improved Electromagnetic (EM) modelling technique. The knowledge acquired from the modelling and characterisation process in this work can be adopted by circuit designers for various high frequency applications.

A Collaborative Location Based Travel Recommendation System through Enhanced Rating Prediction for the Group of Users

PubMed Central

Ravi, Logesh; Vairavasundaram, Subramaniyaswamy

2016-01-01

Rapid growth of web and its applications has created a colossal importance for recommender systems. Being applied in various domains, recommender systems were designed to generate suggestions such as items or services based on user interests. Basically, recommender systems experience many issues which reflects dwindled effectiveness. Integrating powerful data management techniques to recommender systems can address such issues and the recommendations quality can be increased significantly. Recent research on recommender systems reveals an idea of utilizing social network data to enhance traditional recommender system with better prediction and improved accuracy. This paper expresses views on social network data based recommender systems by considering usage of various recommendation algorithms, functionalities of systems, different types of interfaces, filtering techniques, and artificial intelligence techniques. After examining the depths of objectives, methodologies, and data sources of the existing models, the paper helps anyone interested in the development of travel recommendation systems and facilitates future research direction. We have also proposed a location recommendation system based on social pertinent trust walker (SPTW) and compared the results with the existing baseline random walk models. Later, we have enhanced the SPTW model for group of users recommendations. The results obtained from the experiments have been presented. PMID:27069468

Characterisation of spectrophotometers used for spectral solar ultraviolet radiation measurements.

PubMed

Gröbner, J

2001-01-01

Spectrophotometers used for spectral measurements of the solar ultraviolet radiation need to be well characterised to provide accurate and reliable data. Since the characterisation and calibration are usually performed in the laboratory under conditions very different from those encountered during solar measurements, it is essential to address all issues concerned with the representativity of the laboratory characterisation with respect to the solar measurements. These include among others the instrument stability, the instrument linearity, the instrument responsivity, the wavelength accuracy, the spectral resolution, stray light rejection and the instrument dependence on ambient temperature fluctuations. These instrument parameters need to be determined often enough so that the instrument changes only marginally in the period between successive characterisations and therefore provides reliable data for the intervening period.

The behaviour change wheel: a new method for characterising and designing behaviour change interventions.

PubMed

Michie, Susan; van Stralen, Maartje M; West, Robert

2011-04-23

Improving the design and implementation of evidence-based practice depends on successful behaviour change interventions. This requires an appropriate method for characterising interventions and linking them to an analysis of the targeted behaviour. There exists a plethora of frameworks of behaviour change interventions, but it is not clear how well they serve this purpose. This paper evaluates these frameworks, and develops and evaluates a new framework aimed at overcoming their limitations. A systematic search of electronic databases and consultation with behaviour change experts were used to identify frameworks of behaviour change interventions. These were evaluated according to three criteria: comprehensiveness, coherence, and a clear link to an overarching model of behaviour. A new framework was developed to meet these criteria. The reliability with which it could be applied was examined in two domains of behaviour change: tobacco control and obesity. Nineteen frameworks were identified covering nine intervention functions and seven policy categories that could enable those interventions. None of the frameworks reviewed covered the full range of intervention functions or policies, and only a minority met the criteria of coherence or linkage to a model of behaviour. At the centre of a proposed new framework is a 'behaviour system' involving three essential conditions: capability, opportunity, and motivation (what we term the 'COM-B system'). This forms the hub of a 'behaviour change wheel' (BCW) around which are positioned the nine intervention functions aimed at addressing deficits in one or more of these conditions; around this are placed seven categories of policy that could enable those interventions to occur. The BCW was used reliably to characterise interventions within the English Department of Health's 2010 tobacco control strategy and the National Institute of Health and Clinical Excellence's guidance on reducing obesity. Interventions and policies to change behaviour can be usefully characterised by means of a BCW comprising: a 'behaviour system' at the hub, encircled by intervention functions and then by policy categories. Research is needed to establish how far the BCW can lead to more efficient design of effective interventions.

The behaviour change wheel: A new method for characterising and designing behaviour change interventions

PubMed Central

2011-01-01

Background Improving the design and implementation of evidence-based practice depends on successful behaviour change interventions. This requires an appropriate method for characterising interventions and linking them to an analysis of the targeted behaviour. There exists a plethora of frameworks of behaviour change interventions, but it is not clear how well they serve this purpose. This paper evaluates these frameworks, and develops and evaluates a new framework aimed at overcoming their limitations. Methods A systematic search of electronic databases and consultation with behaviour change experts were used to identify frameworks of behaviour change interventions. These were evaluated according to three criteria: comprehensiveness, coherence, and a clear link to an overarching model of behaviour. A new framework was developed to meet these criteria. The reliability with which it could be applied was examined in two domains of behaviour change: tobacco control and obesity. Results Nineteen frameworks were identified covering nine intervention functions and seven policy categories that could enable those interventions. None of the frameworks reviewed covered the full range of intervention functions or policies, and only a minority met the criteria of coherence or linkage to a model of behaviour. At the centre of a proposed new framework is a 'behaviour system' involving three essential conditions: capability, opportunity, and motivation (what we term the 'COM-B system'). This forms the hub of a 'behaviour change wheel' (BCW) around which are positioned the nine intervention functions aimed at addressing deficits in one or more of these conditions; around this are placed seven categories of policy that could enable those interventions to occur. The BCW was used reliably to characterise interventions within the English Department of Health's 2010 tobacco control strategy and the National Institute of Health and Clinical Excellence's guidance on reducing obesity. Conclusions Interventions and policies to change behaviour can be usefully characterised by means of a BCW comprising: a 'behaviour system' at the hub, encircled by intervention functions and then by policy categories. Research is needed to establish how far the BCW can lead to more efficient design of effective interventions. PMID:21513547

"I Feel if I Say This in My Essay It's Not Going to Be as Strong": Multi-Voicedness, "Oral Rehearsal" and Year 13 Students' Written Arguments

ERIC Educational Resources Information Center

Carroll, James Edward

2017-01-01

Jim Carroll was concerned that A-level textbooks failed to provide his students with a model of the multi-voicedness that characterises written history. In order to show his students that historians constantly engage in argument as they write, Carroll turned to academic scholarship for models of multi-voiced history. Carroll explains here how he…

Multiple attractors and dynamics in an OLG model with productive environment

NASA Astrophysics Data System (ADS)

Caravaggio, Andrea; Sodini, Mauro

2018-05-01

This work analyses an overlapping generations model in which economic activity depends on the exploitation of a free-access natural resource. In addition, public expenditures for environmental maintenance are assumed. By characterising some properties of the map and performing numerical simulations, we investigate consequences of the interplay between environmental public expenditure and private sector. In particular, we identify different scenarios in which multiple equilibria as well as complex dynamics may arise.

Peer pressure and Generalised Lotka Volterra models

NASA Astrophysics Data System (ADS)

Richmond, Peter; Sabatelli, Lorenzo

2004-12-01

We develop a novel approach to peer pressure and Generalised Lotka-Volterra (GLV) models that builds on the development of a simple Langevin equation that characterises stochastic processes. We generalise the approach to stochastic equations that model interacting agents. The agent models recently advocated by Marsilli and Solomon are motivated. Using a simple change of variable, we show that the peer pressure model (similar to the one introduced by Marsilli) and the wealth dynamics model of Solomon may be (almost) mapped one into the other. This may help shed light in the (apparently) different wealth dynamics described by GLV and the Marsili-like peer pressure models.

Treatment of Childhood and Adolescent Obesity: An Integrative Review of Recent Recommendations from Five Expert Groups

ERIC Educational Resources Information Center

Kirschenbaum, Daniel S.; Gierut, Kristen

2013-01-01

Objective: To compare and contrast 5 sets of expert recommendations about the treatment of childhood and adolescent obesity. Method: We reviewed 5 sets of recent expert recommendations: 2007 health care organizations' four stage model, 2007 Canadian clinical practice guidelines, 2008 Endocrine Society recommendations, 2009 seven step model, and…

Mathematical modelling of tissue formation in chondrocyte filter cultures.

PubMed

Catt, C J; Schuurman, W; Sengers, B G; van Weeren, P R; Dhert, W J A; Please, C P; Malda, J

2011-12-17

In the field of cartilage tissue engineering, filter cultures are a frequently used three-dimensional differentiation model. However, understanding of the governing processes of in vitro growth and development of tissue in these models is limited. Therefore, this study aimed to further characterise these processes by means of an approach combining both experimental and applied mathematical methods. A mathematical model was constructed, consisting of partial differential equations predicting the distribution of cells and glycosaminoglycans (GAGs), as well as the overall thickness of the tissue. Experimental data was collected to allow comparison with the predictions of the simulation and refinement of the initial models. Healthy mature equine chondrocytes were expanded and subsequently seeded on collagen-coated filters and cultured for up to 7 weeks. Resulting samples were characterised biochemically, as well as histologically. The simulations showed a good representation of the experimentally obtained cell and matrix distribution within the cultures. The mathematical results indicate that the experimental GAG and cell distribution is critically dependent on the rate at which the cell differentiation process takes place, which has important implications for interpreting experimental results. This study demonstrates that large regions of the tissue are inactive in terms of proliferation and growth of the layer. In particular, this would imply that higher seeding densities will not significantly affect the growth rate. A simple mathematical model was developed to predict the observed experimental data and enable interpretation of the principal underlying mechanisms controlling growth-related changes in tissue composition.

A scene model of exosolar systems for use in planetary detection and characterisation simulations

NASA Astrophysics Data System (ADS)

Belu, A.; Thiébaut, E.; Ollivier, M.; Lagache, G.; Selsis, F.; Vakili, F.

2007-12-01

Context: Instrumental projects that will improve the direct optical finding and characterisation of exoplanets have advanced sufficiently to trigger organized investigation and development of corresponding signal processing algorithms. The first step is the availability of field-of-view (FOV) models. These can then be submitted to various instrumental models, which in turn produce simulated data, enabling the testing of processing algorithms. Aims: We aim to set the specifications of a physical model for typical FOVs of these instruments. Methods: The dynamic in resolution and flux between the various sources present in such a FOV imposes a multiscale, independent layer approach. From review of current literature and through extrapolations from currently available data and models, we derive the features of each source-type in the field of view likely to pass the instrumental filter at exo-Earth level. Results: Stellar limb darkening is shown to cause bias in leakage calibration if unaccounted for. Occurrence of perturbing background stars or galaxies in the typical FOV is unlikely. We extract galactic interstellar medium background emissions for current target lists. Galactic background can be considered uniform over the FOV, and it should show no significant drift with parallax. Our model specifications have been embedded into a Java simulator, soon to be made open-source. We have also designed an associated FITS input/output format standard that we present here. Work supported in part by the ESA/ESTEC contract 18701/04/NL/HB, led by Thales Alenia Space.

Improving estuary models by reducing uncertainties associated with river flows

NASA Astrophysics Data System (ADS)

Robins, Peter E.; Lewis, Matt J.; Freer, Jim; Cooper, David M.; Skinner, Christopher J.; Coulthard, Tom J.

2018-07-01

To mitigate against future changes to estuaries such as water quality, catchment and estuary models can be coupled to simulate the transport of harmful pathogenic viruses, pollutants and nutrients from their terrestrial sources, through the estuary and to the coast. To predict future changes to estuaries, daily mean river flow projections are typically used. We show that this approach cannot resolve higher frequency discharge events that have large impacts to estuarine dilution, contamination and recovery for two contrasting estuaries. We therefore characterise sub-daily scale flow variability and propagate this through an estuary model to provide robust estimates of impacts for the future. River flow data (35-year records at 15-min sampling) were used to characterise variabilities in storm hydrograph shapes and simulate the estuarine response. In particular, we modelled a fast-responding catchment-estuary system (Conwy, UK), where the natural variability in hydrograph shapes generated large variability in estuarine circulation that was not captured when using daily-averaged river forcing. In the extreme, the freshwater plume from a 'flash' flood (lasting <12 h) was underestimated by up to 100% - and the response to nutrient loading was underestimated further still. A model of a slower-responding system (Humber, UK), where hydrographs typically last 2-4 days, showed less variability in estuarine circulation and good approximation with daily-averaged flow forcing. Our result has implications for entire system impact modelling; when we determine future changes to estuaries, some systems will need higher resolution future river flow estimates.

Children's colour choices for completing drawings of affectively characterised topics.

PubMed

Burkitt, Esther; Barrett, Martyn; Davis, Alyson

2003-03-01

This study was designed to explore whether or not children systematically use particular colours when completing drawings of affectively characterised topics. Three hundred and thirty 4-11-year-old children were subdivided into three conditions, colouring in a drawing of a man, a dog, or a tree, respectively. The children completed two test sessions in counterbalanced order. In one session, children rated and ranked ten colours in order of preference. In the other session, children completed three colouring tasks in which they had to colour in three identical figures but which had been given different affective characterisations: a neutrally characterised figure, a figure characterised as nasty, and a figure characterised as nice. It was found that, in all age groups and for all topics, the children used their more preferred colours for the nice figures, their least preferred colours for the nasty figures, and colours rated intermediately for the neutral figures. It was also found that, in all age groups and for all topics, black tended to be the most frequently chosen colour for colouring in the drawings of the negatively characterised figures. By contrast, primary colours were predominantly selected for the neutral figure, while a wide range of mainly primary and secondary colours were chosen for colouring in the nice figure. These results suggest that children are able to alter systematically their use of colour during picture completion tasks in response to differential affective topic characterisations, and that even very young children are able to use colours symbolically.

Current Application of Capillary Electrophoresis in Nanomaterial Characterisation and Its Potential to Characterise the Protein and Small Molecule Corona

PubMed Central

Guggenheim, Emily J.; Briffa, Sophie M.; Thorn, James A.; Lynch, Iseult; Valsami-Jones, Eugenia

2018-01-01

Due to the increasing use and production of nanomaterials (NMs), the ability to characterise their physical/chemical properties quickly and reliably has never been so important. Proper characterisation allows a thorough understanding of the material and its stability, and is critical to establishing dose-response curves to ascertain risks to human and environmental health. Traditionally, methods such as Transmission Electron Microscopy (TEM), Field Flow Fractionation (FFF) and Dynamic Light Scattering (DLS) have been favoured for size characterisation, due to their wide-availability and well-established protocols. Capillary Electrophoresis (CE) offers a faster and more cost-effective solution for complex dispersions including polydisperse or non-spherical NMs. CE has been used to rapidly separate NMs of varying sizes, shapes, surface modifications and compositions. This review will discuss the literature surrounding the CE separation techniques, detection and NM characteristics used for the analysis of a wide range of NMs. The potential of combining CE with mass spectrometry (CE-MS) will also be explored to further expand the characterisation of NMs, including the layer of biomolecules adsorbed to the surface of NMs in biological or environmental compartments, termed the acquired biomolecule corona. CE offers the opportunity to uncover new/poorly characterised low abundance and polar protein classes due to the high ionisation efficiency of CE-MS. Furthermore, the possibility of using CE-MS to characterise the poorly researched small molecule interactions within the NM corona is discussed. PMID:29439415

Natural ventilation for the prevention of airborne contagion.

PubMed

Escombe, A Roderick; Oeser, Clarissa C; Gilman, Robert H; Navincopa, Marcos; Ticona, Eduardo; Pan, William; Martínez, Carlos; Chacaltana, Jesus; Rodríguez, Richard; Moore, David A J; Friedland, Jon S; Evans, Carlton A

2007-02-01

Institutional transmission of airborne infections such as tuberculosis (TB) is an important public health problem, especially in resource-limited settings where protective measures such as negative-pressure isolation rooms are difficult to implement. Natural ventilation may offer a low-cost alternative. Our objective was to investigate the rates, determinants, and effects of natural ventilation in health care settings. The study was carried out in eight hospitals in Lima, Peru; five were hospitals of "old-fashioned" design built pre-1950, and three of "modern" design, built 1970-1990. In these hospitals 70 naturally ventilated clinical rooms where infectious patients are likely to be encountered were studied. These included respiratory isolation rooms, TB wards, respiratory wards, general medical wards, outpatient consulting rooms, waiting rooms, and emergency departments. These rooms were compared with 12 mechanically ventilated negative-pressure respiratory isolation rooms built post-2000. Ventilation was measured using a carbon dioxide tracer gas technique in 368 experiments. Architectural and environmental variables were measured. For each experiment, infection risk was estimated for TB exposure using the Wells-Riley model of airborne infection. We found that opening windows and doors provided median ventilation of 28 air changes/hour (ACH), more than double that of mechanically ventilated negative-pressure rooms ventilated at the 12 ACH recommended for high-risk areas, and 18 times that with windows and doors closed (p < 0.001). Facilities built more than 50 years ago, characterised by large windows and high ceilings, had greater ventilation than modern naturally ventilated rooms (40 versus 17 ACH; p < 0.001). Even within the lowest quartile of wind speeds, natural ventilation exceeded mechanical (p < 0.001). The Wells-Riley airborne infection model predicted that in mechanically ventilated rooms 39% of susceptible individuals would become infected following 24 h of exposure to untreated TB patients of infectiousness characterised in a well-documented outbreak. This infection rate compared with 33% in modern and 11% in pre-1950 naturally ventilated facilities with windows and doors open. Opening windows and doors maximises natural ventilation so that the risk of airborne contagion is much lower than with costly, maintenance-requiring mechanical ventilation systems. Old-fashioned clinical areas with high ceilings and large windows provide greatest protection. Natural ventilation costs little and is maintenance free, and is particularly suited to limited-resource settings and tropical climates, where the burden of TB and institutional TB transmission is highest. In settings where respiratory isolation is difficult and climate permits, windows and doors should be opened to reduce the risk of airborne contagion.

Habermas, Lifeworld and Rationality: Towards a Comprehensive Model of Lifelong Learning

ERIC Educational Resources Information Center

Regmi, Kapil Dev

2017-01-01

Major supranational organisations such as the Organisation for Economic Cooperation and Development, the European Union, and the World Bank have used lifelong learning as a strategy to boost economic competitiveness both at individual and national levels. In the literature related to lifelong learning this is characterised as the economistic model…

From Student Associations to CEUNE: The Development of Student Representation in Spain

ERIC Educational Resources Information Center

Parejo, José Luis; Lorente, Javier

2012-01-01

The forms of students' political participation in the administration of higher education in Spain have evolved throughout history. Spain has developed from a period characterised by the corporatist model of Sindicato Espanõl Universitario--as a single syndicate of students controlled by the Franco Regime--towards the emergence of a student…

Key findings from the International Ovarian Tumor Analysis (IOTA) study: an approach to the optimal ultrasound based characterisation of adnexal pathology

PubMed Central

Bourne, Tom; De Rijdt, Sylvie; Van Holsbeke, Caroline; Sayasneh, Ahmad; Valentin, Lil; Van Calster, Ben; Timmerman, Dirk

2015-01-01

Abstract The principal aim of the IOTA project has been to develop approaches to the evaluation of adnexal pathology using ultrasound that can be transferred to all examiners. Creating models that use simple, easily reproducible ultrasound characteristics is one approach. PMID:28191150

Characterisation of soil microtopography effects on runoff and soil erosion rates under simulated rainfall

USDA-ARS?s Scientific Manuscript database

Soil surface roughness is commonly identified as one of the dominant factors governing runoff and interrill erosion. Yet, because of difficulties in acquiring the data, most studies pay little attention to soil surface roughness. This is particularly true for soil erosion models which commonly don't...

Embracing Connectedness and Change: A Complex Dynamic Systems Perspective for Applied Linguistic Research

ERIC Educational Resources Information Center

Cameron, Lynne

2015-01-01

Complex dynamic systems (CDS) theory offers a powerful metaphorical model of applied linguistic processes, allowing holistic descriptions of situated phenomena, and addressing the connectedness and change that often characterise issues in our field. A recent study of Kenyan conflict transformation illustrates application of a CDS perspective. Key…

Teacher Educators as Curriculum Developers: Exploration of a Professional Role

ERIC Educational Resources Information Center

Bouckaert, Marina; Kools, Quinta

2018-01-01

Teacher educators arguably fulfil several roles in their professional context: they can be seen as role models or teachers of teachers, and have additionally been characterised as researchers, mentors, gatekeepers, brokers, and curriculum developers. To address a perceived gap in the literature on the latter role, a quantitative and qualitative…

Management and Leadership in UK Universities: Exploring the Possibilities of Change

ERIC Educational Resources Information Center

Waring, Matt

2017-01-01

This paper considers the case for reform of management structures in UK universities and offers proposals for change. The model of top-down, performance-led management that characterises many institutions is both outmoded and ill-suited to the challenges of an increasingly turbulent higher education sector. Drawing on the experiences of a…

Bringing Open Educational Practice to a Research-Intensive University: Prospects and Challenges

ERIC Educational Resources Information Center

Masterman, Elizabeth

2016-01-01

This article describes a small-scale study that explored the relationship between the pedagogical practices characterised as "open" and the existing model of undergraduate teaching and learning at a large research-intensive university (RIU). The aim was to determine the factors that might enable (conversely impede) the greater uptake of…

An E-Assessment Approach for Evaluation in Engineering Overcrowded Groups

ERIC Educational Resources Information Center

Mora, M. C.; Sancho-Bru, J. L.; Iserte, J. L.; Sanchez, F. T.

2012-01-01

The construction of the European Higher Education Area has been an adaptation challenge for Spanish universities. New methodologies require a more active role on the students' part and come into conflict with the previous educational model characterised by a high student/professor ratio, a lecture-based teaching methodology and a summative…

Beyond Wishful Thinking: Integrating Consumer Preferences in the Assessment of Dietary Recommendations

PubMed Central

2016-01-01

Convenience, taste, and prices are the main determinants of food choices. Complying with dietary recommendations therefore imposes a “taste cost” on consumers, potentially hindering adoption of those recommendations. The study presents and applies a new methodology, based on economic theory, to quantify this taste cost and assess the health and welfare effects of different dietary recommendations. Then, by comparison of those effects, we identify socially desirable recommendations that are most compatible with consumer preferences (i.e., that best balance health benefits against”taste cost”) and should be prioritized for promotion. The methodology proceeds in three-steps: first, an economic-behavioral model simulates how whole diets would change if consumers complied with dietary recommendations; second, an epidemiological model estimates the number of deaths avoided (DA) due to the dietary change; third, an efficiency analysis weighs the health benefits against the taste and policy costs of each recommendation. The empirical model is calibrated using French data. We find that recommendations to reduce consumption of red meat and soft-drinks, or raise consumption of milk products and fish/seafood impose relatively moderate taste costs. By comparison, recommendations related to F&V consumption and, to a lesser extent, butter/cream/cheese, snacks, and all meats impose larger taste costs on consumers. The F&V recommendation is the costliest for consumers to comply with, but it also reduces diet-related mortality the most, so that a large budget could be allocated to promoting F&V consumption while keeping this policy cost-beneficial. We conclude that promotion of most dietary recommendations improves social welfare. Our framework complements the programming models available in nutrition and public health: those models are best used to identify dietary targets, following which our framework identifies cost-beneficial ways of moving towards those targets. PMID:27362764

Beyond Wishful Thinking: Integrating Consumer Preferences in the Assessment of Dietary Recommendations.

PubMed

Irz, Xavier; Leroy, Pascal; Réquillart, Vincent; Soler, Louis-Georges

2016-01-01

Convenience, taste, and prices are the main determinants of food choices. Complying with dietary recommendations therefore imposes a "taste cost" on consumers, potentially hindering adoption of those recommendations. The study presents and applies a new methodology, based on economic theory, to quantify this taste cost and assess the health and welfare effects of different dietary recommendations. Then, by comparison of those effects, we identify socially desirable recommendations that are most compatible with consumer preferences (i.e., that best balance health benefits against"taste cost") and should be prioritized for promotion. The methodology proceeds in three-steps: first, an economic-behavioral model simulates how whole diets would change if consumers complied with dietary recommendations; second, an epidemiological model estimates the number of deaths avoided (DA) due to the dietary change; third, an efficiency analysis weighs the health benefits against the taste and policy costs of each recommendation. The empirical model is calibrated using French data. We find that recommendations to reduce consumption of red meat and soft-drinks, or raise consumption of milk products and fish/seafood impose relatively moderate taste costs. By comparison, recommendations related to F&V consumption and, to a lesser extent, butter/cream/cheese, snacks, and all meats impose larger taste costs on consumers. The F&V recommendation is the costliest for consumers to comply with, but it also reduces diet-related mortality the most, so that a large budget could be allocated to promoting F&V consumption while keeping this policy cost-beneficial. We conclude that promotion of most dietary recommendations improves social welfare. Our framework complements the programming models available in nutrition and public health: those models are best used to identify dietary targets, following which our framework identifies cost-beneficial ways of moving towards those targets.

Influence of internal viscoelastic modes on the Brownian motion of a λ-DNA coated colloid.

PubMed

Yanagishima, Taiki; Laohakunakorn, Nadanai; Keyser, Ulrich F; Eiser, Erika; Tanaka, Hajime

2014-03-21

We study the influence of grafted polymers on the diffusive behaviour of a colloidal particle. Our work demonstrates how such additional degrees of freedom influence the Brownian motion of the particle, focusing on internal viscoelastic coupling between the polymer and colloid. Specifically, we study the mean-squared displacements (MSDs) of λ-DNA grafted colloids using Brownian dynamics simulation. Our simulations reveal the non-trivial effect of internal modes, which gives rise to a crossover from the short-time viscoelastic to long-time diffusional behaviour. We also show that basic features can be captured by a simple theoretical model considering the relative motion of a colloid to a part of the polymer corona. This model describes well a MSD calculated from an extremely long trajectory of a single λ-DNA coated colloid from experiment and allows characterisation of the λ-DNA hairs. Our study suggests that the access to the internal relaxation modes via the colloid trajectory offers a novel method for the characterisation of soft attachments to a colloid.

Polarised Clathrin-Mediated Endocytosis of EGFR During Chemotactic Invasion

PubMed Central

Mutch, Laura Jane; Howden, Jake Davey; Jenner, Emma Poppy Louise; Poulter, Natalie Sarah; Rappoport, Joshua Zachary

2014-01-01

Directed cell migration is critical for numerous physiological processes including development and wound healing. However chemotaxis is also exploited during cancer progression. Recent reports have suggested links between vesicle trafficking pathways and directed cell migration. Very little is known about the potential roles of endocytosis pathways during metastasis. Therefore we performed a series of studies employing a previously characterised model for chemotactic invasion of cancer cells to assess specific hypotheses potentially linking endocytosis to directed cell migration. Our results demonstrate that clathrin-mediated endocytosis is indispensable for epidermal growth factor (EGF) directed chemotactic invasion of MDA-MB-231 cells. Conversely, caveolar endocytosis is not required in this mode of migration. We further found that chemoattractant receptor (EGFR) trafficking occurs by clathrin-mediated endocytosis and is polarised towards the front of migrating cells. However, we found no role for clathrin-mediated endocytosis in focal adhesion disassembly in this migration model. Thus, this study has characterised the role of endocytosis during chemotactic invasion and has identified functions mechanistically linking clathrin-mediated endocytosis to directed cell motility. PMID:24921075

Validation of a sensitive DNA walking strategy to characterise unauthorised GMOs using model food matrices mimicking common rice products.

PubMed

Fraiture, Marie-Alice; Herman, Philippe; Taverniers, Isabel; De Loose, Marc; Van Nieuwerburgh, Filip; Deforce, Dieter; Roosens, Nancy H

2015-04-15

To identify unauthorised GMOs in food and feed matrices, an integrated approach has recently been developed targeting pCAMBIA family vectors, highly present in transgenic plants. Their presence is first assessed by qPCR screening and is subsequently confirmed by characterising the transgene flanking regions, using DNA walking. Here, the DNA walking performance has been thoroughly tested for the first time, regarding the targeted DNA quality and quantity. Several assays, on model food matrices mimicking common rice products, have allowed to determine the limit of detection as well as the potential effects of food mixture and processing. This detection system allows the identification of transgenic insertions as low as 10 HGEs and was not affected by the presence of untargeted DNA. Moreover, despite the clear impact of food processing on DNA quality, this method was able to cope with degraded DNA. Given its specificity, sensitivity, reliability, applicability and practicability, the proposed approach is a key detection tool, easily implementable in enforcement laboratories. Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.

Sinusoidal voltage protocols for rapid characterisation of ion channel kinetics.

PubMed

Beattie, Kylie A; Hill, Adam P; Bardenet, Rémi; Cui, Yi; Vandenberg, Jamie I; Gavaghan, David J; de Boer, Teun P; Mirams, Gary R

2018-03-24

Ion current kinetics are commonly represented by current-voltage relationships, time constant-voltage relationships and subsequently mathematical models fitted to these. These experiments take substantial time, which means they are rarely performed in the same cell. Rather than traditional square-wave voltage clamps, we fitted a model to the current evoked by a novel sum-of-sinusoids voltage clamp that was only 8 s long. Short protocols that can be performed multiple times within a single cell will offer many new opportunities to measure how ion current kinetics are affected by changing conditions. The new model predicts the current under traditional square-wave protocols well, with better predictions of underlying currents than literature models. The current under a novel physiologically relevant series of action potential clamps is predicted extremely well. The short sinusoidal protocols allow a model to be fully fitted to individual cells, allowing us to examine cell-cell variability in current kinetics for the first time. Understanding the roles of ion currents is crucial to predict the action of pharmaceuticals and mutations in different scenarios, and thereby to guide clinical interventions in the heart, brain and other electrophysiological systems. Our ability to predict how ion currents contribute to cellular electrophysiology is in turn critically dependent on our characterisation of ion channel kinetics - the voltage-dependent rates of transition between open, closed and inactivated channel states. We present a new method for rapidly exploring and characterising ion channel kinetics, applying it to the hERG potassium channel as an example, with the aim of generating a quantitatively predictive representation of the ion current. We fitted a mathematical model to currents evoked by a novel 8 second sinusoidal voltage clamp in CHO cells overexpressing hERG1a. The model was then used to predict over 5 minutes of recordings in the same cell in response to further protocols: a series of traditional square step voltage clamps, and also a novel voltage clamp comprising a collection of physiologically relevant action potentials. We demonstrate that we can make predictive cell-specific models that outperform the use of averaged data from a number of different cells, and thereby examine which changes in gating are responsible for cell-cell variability in current kinetics. Our technique allows rapid collection of consistent and high quality data, from single cells, and produces more predictive mathematical ion channel models than traditional approaches. © 2018 The Authors. The Journal of Physiology published by John Wiley & Sons Ltd on behalf of The Physiological Society.

Genetic Characterisation of Plasmodium falciparum Isolates with Deletion of the pfhrp2 and/or pfhrp3 Genes in Colombia: The Amazon Region, a Challenge for Malaria Diagnosis and Control

PubMed Central

Dorado, Erika Jimena; Okoth, Sheila Akinyi; Montenegro, Lidia Madeline; Diaz, Gustavo; Barnwell, John W.; Udhayakumar, Venkatachalam; Murillo Solano, Claribel

2016-01-01

Most Plasmodium falciparum-detecting rapid diagnostic tests (RDTs) target histidine-rich protein 2 (PfHRP2). However, P. falciparum isolates with deletion of the pfhrp2 gene and its homolog gene, pfhrp3, have been detected. We carried out an extensive investigation on 365 P. falciparum dried blood samples collected from seven P. falciparum endemic sites in Colombia between 2003 and 2012 to genetically characterise and geographically map pfhrp2- and/or pfhrp3-negative P. falciparum parasites in the country. We found a high proportion of pfhrp2-negative parasites only in Amazonas (15/39; 38.5%), and these parasites were also pfhrp3-negative. These parasites were collected between 2008 and 2009 in Amazonas, while pfhrp3-negative parasites (157/365, 43%) were found in all the sites and from each of the sample collection years evaluated (2003 to 2012). We also found that all pfhrp2- and/or pfhrp3-negative parasites were also negative for one or both flanking genes. Six sub-population clusters were established with 93.3% (14/15) of the pfhrp2-negative parasites grouped in the same cluster and sharing the same haplotype. This haplotype corresponded with the genetic lineage BV1, a multidrug resistant strain that caused two outbreaks reported in Peru between 2010 and 2013. We found this BV1 lineage in the Colombian Amazon as early as 2006. Two new clonal lineages were identified in these parasites from Colombia: the genetic lineages EV1 and F. PfHRP2 sequence analysis revealed high genetic diversity at the amino acid level, with 17 unique sequences identified among 53 PfHRP2 sequences analysed. The use of PfHRP2-based RDTs is not recommended in Amazonas because of the high proportion of parasites with pfhrp2 deletion (38.5%), and implementation of new strategies for malaria diagnosis and control in Amazonas must be prioritised. Moreover, studies to monitor and genetically characterise pfhrp2-negative P. falciparum parasites in the Americas are warranted, given the extensive human migration occurring in the region. PMID:27636709

The subjective wellbeing profile of the 'pretiree' demographic: A cross-sectional study.

PubMed

Pasco, Julie A; Holloway, Kara L; Stuart, Amanda L; Williams, Lana J; Brennan-Olsen, Sharon L; Berk, Michael

2018-04-01

Pretirees are a demographic interposed between the latter stages of working life and old age. We aimed to characterise subjective wellbeing and lifestyle behaviours for individuals aged in their late-fifties and sixties. Cross-sectional study of 233 men and 229 women aged 55-69 yr from the Geelong Osteoporosis Study. Subjective wellbeing assessed using the World Health Organization Quality of Life questionnaire (WHOQOL-BREF, Australia). Scores below published population norms for Australia for WHOQOL domains (physical, psychological, social, environmental) were considered low. For men, low WHOQOL scores were evident for 78 (33.5%) of participants regarding physical health, 94 (40.3%) for psychological wellbeing, 89 (38.2%) for social relationships, and 99 (42.5%) for the environment; the respective figures for women were 110 (48.0%), 124 (54.1%), 84 (36.7%), and 95 (41.5%). While there were few smokers (men 10.8%; women 6.5%), 42.5% of men and 17.7% of women exceeded recommended alcohol levels; 6.4% of men and 15.2% of women met the recommendation to consume each day at least two portions of fruit and five of vegetables. In multivariable models, being active was consistently associated with high WHOQOL scores, and low socioeconomic status with low WHOQOL scores. Pain and polypharmacy were associated with increased likelihood of poor scores for physical health, living with a partner increased the likelihood of good social relationships, and body mass index, employment, sleep, and alcohol and fruit/vegetable intakes were associated with WHOQOL scores in at least one domain. There is an opportunity for targeting health promotion to pretirees, particularly in socially disadvantaged regions, in order to optimise transition into old age. Our data highlight lifestyle interventions without which many pretirees might progress to old age at increased risk of diminished wellbeing. Copyright © 2018 Elsevier B.V. All rights reserved.

Implementation challenges for designing integrated in vitro testing strategies (ITS) aiming at reducing and replacing animal experimentation.

PubMed

De Wever, Bart; Fuchs, Horst W; Gaca, Marianna; Krul, Cyrille; Mikulowski, Stan; Poth, Albrecht; Roggen, Erwin L; Vilà, Maya R

2012-04-01

At the IVTIP (in vitro testing industrial platform) meeting of November 26th 2009 entitled 'Toxicology in the 21st century ('21C')--working our way towards a visionary reality' all delegates endorsed the emerging concept of the '21C' vision as the way forward to enable a thorough, reliable and systematic approach to future toxicity testing without the use of animals. One of the emerging concepts focused on integrating a defined number of tests modelling in vivo-relevant and well-characterised toxicity pathways representing mechanistic endpoints. At this meeting the importance of Integrated Testing Strategies (ITS) as tools towards reduction and eventually replacement of the animals currently used for hazard identification and risk assessment was recognised. A follow-up IVTIP Spring 2010 meeting entitled 'Integrated In Vitro Testing Strategies (ITS)--Implementation Challenges' was organised to address pending questions about ITS. This report is not a review of the ITS literature, but a summary of the discussions triggered by presented examples on how to develop and implement ITS. Contrasts between pharmaceutical and chemical industry, as well as a list of general but practical aspects to be considered while developing an ITS emerged from the discussions. In addition, current recommendations on the validation of ITS were discussed. In conclusion, the outcome of this workshop improved the understanding of the participants of some important factors that may impact the design of an ITS in function of its purpose (e.g., screening, or early decision making versus regulatory), the context in which they need to be applied (e.g., ICH guidelines, REACH) and the status and quality of the available tools. A set of recommendations of best practices was established and the importance of the applicability of the individual tests as well as the testing strategy itself was highlighted. Copyright © 2012 Elsevier Ltd. All rights reserved.

Synthesis, X-ray characterisation and reactions of a trigonal planar palladium(0) carbonyl complex, (tbpx)PdCO.

PubMed

Bellabarba, Ronan M; Tooze, Robert P; Slawin, Alexandra M Z

2003-08-07

The novel complex (tbpx)PdCO (1), the first example of a structurally characterised sixteen electron, trigonal planar palladium(0) carbonyl complex, was prepared, characterised by NMR spectroscopy and X-ray crystallography, and some unusual aspects of its reactivity were studied.

Characterisation of Fractures and Fracture Zones in a Carbonate Aquifer Using Electrical Resistivity Tomography and Pricking Probe Methodes

NASA Astrophysics Data System (ADS)

Szalai, Sandor; Kovacs, Attila; Kuslits, Lukács; Facsko, Gabor; Gribovszki, Katalin; Kalmar, Janos; Szarka, Laszlo

2018-04-01

Position, width and fragmentation level of fracture zones and position, significance and characteristic distance of fractures were aimed to determine in a carbonate aquifer. These are fundamental parameters, e.g. in hydrogeological modelling of aquifers, due to their role in subsurface water movements. The description of small scale fracture systems is however a challenging task. In the test area (Kádárta, Bakony Mts, Hungary), two methods proved to be applicable to get reasonable information about the fractures: Electrical Resistivity Tomography (ERT) and Pricking-Probe (PriP). PriP is a simple mechanical tool which has been successfully applied in archaeological investigations. ERT results demonstrated its applicability in this small scale fracture study. PriP proved to be a good verification tool both for fracture zone mapping and detecting fractures, but in certain areas, it produced different results than the ERT. The applicability of this method has therefore to be tested yet, although its problems most probably origin from human activity which reorganises the near-surface debris distribution. In the test site, both methods displayed fracture zones including a very characteristic one and a number of individual fractures and determined their characteristic distance and significance. Both methods prove to be able to produce hydrogeologically important parameters even individually, but their simultaneous application is recommended to decrease the possible discrepancies.

Characterisation of neutron-sensitive bubble detectors for application in the measurement of jet aircrew exposure to natural background radiation.

PubMed

Tume, P; Lewis, B J; Bennett, L G; Cousins, T

1998-01-01

A survey of the natural background dose equivalent received by Canadian Forces aircrew was conducted using neutron-sensitive bubble detectors (BDs) as the primary detection tool. Since this study was a new application for these detectors, the BD response to neutron dose equivalent (RD) was extended from thermal to 500 MeV in neutron energy. Based upon the extended RD, it was shown that the manufacturer's calibration can be scaled by 1.5 +/- 0.5 to give a BD sensitivity that takes into account recently recommended fluence-to-neutron dose equivalent conversion functions and the cosmogenic neutron spectrum encountered at jet altitudes. An investigation of the effects of systematic bias caused by the cabin environment (i.e., temperature, pressure and relative humidity) on the in-flight measurements was also conducted. Both simulated and actual aircraft climate tests indicated that the detectors are insensitive to the pressure and relative humidity variations encountered during routine jet aircraft operations. Long term conditioning tests also confirmed that the BD-PND model of detector is sensitive to variations in temperature to within +/- 20%. As part of the testing process, the in-flight measurements also demonstrated that the neutron dose equivalent is distributed uniformly throughout a Boeing 707 jet aircraft, indicating that both pilots and flight attendants are exposed to the same neutron field intensity to within experimental uncertainty.

Mitodepressive, antioxidant, antifungal and anti-inflammatory effects of wild-growing Romanian native Arctium lappa L. (Asteraceae) and Veronica persica Poiret (Plantaginaceae).

PubMed

Fierascu, Radu Claudiu; Georgiev, Milen I; Fierascu, Irina; Ungureanu, Camelia; Avramescu, Sorin Marius; Ortan, Alina; Georgescu, Mihaela Ioana; Sutan, Anca Nicoleta; Zanfirescu, Anca; Dinu-Pirvu, Cristina Elena; Velescu, Bruno Stefan; Anuta, Valentina

2018-01-01

The present study aims to evaluate the potential uses of hydroalcoholic extracts obtained from Romanian native wild-growing plants. The hydroalcoholic extracts were obtained from the burdock roots and respectively the aerial parts of birdeye speedwell. The extracts were characterised by HPLC (quantifying 13 compounds in the V. persica extract, 6 compounds in the A. lappa extract and confirming the presence of arctiin and arctigenin in the burdock extract). The antioxidant potential of the crude extracts was evaluated using two methods: the DPPH assay (79.91% for speedwell extract, 76.23% for burdock extract) and the phosphomolybdate method (296.5 mg/g ascorbic acid equivalents for burdock, 324.4 mg/g for speedwell). The crude extracts were found to be active against both fungal lines used (Aspergillus niger and Penicillium hirsutum), inhibition zones - 17.1 mm and 13.1 mm against P. hirsutum, respectively ca. 22 mm for both extracts against A. niger. The cytogenetic effects (assessed using the Allium cepa assay) revealed a series of chromosomal aberrations and nuclear aberrations induced in the meristematic root cells. The anti-inflammatory effect, estimated in two inflammation experimental models, showed a significant effect, especially for the speedwell extract. The results recommend the evaluated extracts as promising sources of biologically-active compounds. Copyright © 2017 Elsevier Ltd. All rights reserved.

“Lost in translation”: accounting for between-country differences in the analysis of multinational cost-effectiveness data§

PubMed Central

Manca, Andrea; Willan, Andrew R.

2008-01-01

Background Cost-effectiveness analysis has gained status over the last 15 years as an important tool for assisting resource allocation decisions in a budged-limited environment such as healthcare. Randomised (multicentre) multinational controlled trials are often the main vehicle to collect primary patient-level information on resource use, cost and clinical effectiveness associated with alternative treatment strategies. However, trial-wide cost-effectiveness results may not be directly applicable to any one of the countries that participate in a multinational trial, requiring some form of additional modelling to customise the results to the country of interest. Objective The aim is to produce recommendations regarding methods that can be (currently) considered ‘good practice’ when exploring the geographical generalisability of cost-effectiveness data. The manuscript proposes an algorithm to assist with the choice of the appropriate analytical strategy when facing the task of adapting the study results from one country to another. The algorithm considers different scenarios characterised by whether or not (a) the country of interest participated in the trial, and (b) individual patient-level data (IPD) from the trial are available. Methods Structured review with description and discussion of case studies. Conclusions Methods to reflect between-country variability in cost-effectiveness data are available. It is important to be transparent regarding the assumptions made in the analysis and (where possible) assess their impact on the study results. PMID:17067195

A Capability-Based Approach to Analyzing the Effectiveness and Robustness of an Offshore Patrol Vessel in the Search and Rescue Mission

DTIC Science & Technology

2012-12-01

13 D. NPSS MODEL DEVELOPMENT...COMPARISON: NPSS MODEL WITH ITALIAN MODEL ...................51 IV. CONCLUSIONS AND RECOMMENDATIONS...58 1. Italian Model Recommendations ......................................................58 2. NPSS Model

Modelling nematode movement using time-fractional dynamics.

PubMed

Hapca, Simona; Crawford, John W; MacMillan, Keith; Wilson, Mike J; Young, Iain M

2007-09-07

We use a correlated random walk model in two dimensions to simulate the movement of the slug parasitic nematode Phasmarhabditis hermaphrodita in homogeneous environments. The model incorporates the observed statistical distributions of turning angle and speed derived from time-lapse studies of individual nematode trails. We identify strong temporal correlations between the turning angles and speed that preclude the case of a simple random walk in which successive steps are independent. These correlated random walks are appropriately modelled using an anomalous diffusion model, more precisely using a fractional sub-diffusion model for which the associated stochastic process is characterised by strong memory effects in the probability density function.

Soil DNA metabarcoding and high-throughput sequencing as a forensic tool: considerations, potential limitations and recommendations.

PubMed

Young, J M; Austin, J J; Weyrich, L S

2017-02-01

Analysis of physical evidence is typically a deciding factor in forensic casework by establishing what transpired at a scene or who was involved. Forensic geoscience is an emerging multi-disciplinary science that can offer significant benefits to forensic investigations. Soil is a powerful, nearly 'ideal' contact trace evidence, as it is highly individualistic, easy to characterise, has a high transfer and retention probability, and is often overlooked in attempts to conceal evidence. However, many real-life cases encounter close proximity soil samples or soils with low inorganic content, which cannot be easily discriminated based on current physical and chemical analysis techniques. The capability to improve forensic soil discrimination, and identify key indicator taxa from soil using the organic fraction is currently lacking. The development of new DNA sequencing technologies offers the ability to generate detailed genetic profiles from soils and enhance current forensic soil analyses. Here, we discuss the use of DNA metabarcoding combined with high-throughput sequencing (HTS) technology to distinguish between soils from different locations in a forensic context. Specifically, we provide recommendations for best practice, outline the potential limitations encountered in a forensic context and describe the future directions required to integrate soil DNA analysis into casework. © FEMS 2016. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Are pertussis cases reported too late for public health interventions? Retrospective analysis of cases in London and South East England, 2010 to 2015

PubMed Central

Crabbe, Helen; Saavedra-Campos, María; Verlander, Neville Q; Leonard, Anusha; Morris, Jill; Wright, Amanda; Balasegaram, Sooria

2017-01-01

In the United Kingdom, pertussis guidance recommends prophylaxis for household contacts within 21 days of case symptom onset if the household includes a vulnerable contact. The aim of our study was to identify characteristics associated with cases reported late for public health action. We reviewed the epidemiology of cases reported in London and South East England for the period 2010 to 2015. We characterised risk factors associated with late reporting of cases and described public health actions taken on timely reported cases. From 2010 to 2015, 9,163 cases of pertussis were reported to health protection teams. Only 11% of cases were reported within 21 days of onset, limiting opportunities for secondary prevention. Timely reporting was associated with younger age groups, pregnancy, being a healthcare worker and being reported by schools or hospital clinicians. Late reporting was associated with older age groups and general practitioner or laboratory reporting. Delays, such as those due to insidious onset and late presentation to healthcare, may be unavoidable; however, delay in reporting once a patient presents can be reduced since cases can be reported before laboratory confirmation. Thus we recommend working with clinicians and laboratories to determine causes and improve early reporting to public health. PMID:28749334

Barrett's oesophagus: epidemiology, diagnosis and clinical management.

PubMed

Whiteman, David C; Kendall, Bradley J

2016-10-03

Barrett's oesophagus is a condition characterised by partial replacement of the normal squamous epithelium of the lower oesophagus by a metaplastic columnar epithelium containing goblet cells (intestinal metaplasia). Barrett's oesophagus is important clinically because those afflicted are predisposed to oesophageal adenocarcinoma. Prevalence surveys suggest that up to 2% of the population may be affected; most will be unaware of their diagnosis. Risk factors include age, male sex, gastro-oesophageal acid reflux, central obesity and smoking. Helicobacter pylori infection confers a reduced risk of Barrett's oesophagus. Risks of cancer progression are lower than originally reported and are now estimated at 1-3 per 1000 patient-years for patients with non-dysplastic Barrett's oesophagus. Progression rates are higher for patients with long segment (≥ 3 cm) and dysplastic Barrett's oesophagus. Australian guidelines have been developed to aid practitioners in managing patients with Barrett's oesophagus and early oesophageal adenocarcinoma. While generalised population screening for Barrett's oesophagus is not recommended, endoscopic surveillance of patients with confirmed Barrett's oesophagus is recommended, with surveillance intervals dependent on segment length and presence of dysplasia. New techniques such as endoscopic mucosal resection and endoscopic radiofrequency ablation are now available to treat patients with dysplasia and early oesophageal adenocarcinoma. New screening and surveillance technologies are currently under investigation; these may prove cost-effective in identifying and managing patients in the community.

Characterisation of the epithermal neutron irradiation facility at the Portuguese research reactor using MCNP.

PubMed

Beasley, D G; Fernandes, A C; Santos, J P; Ramos, A R; Marques, J G; King, A

2015-05-01

The radiation field at the epithermal beamline and irradiation chamber installed at the Portuguese Research Reactor (RPI) at the Campus Tecnológico e Nuclear of Instituto Superior Técnico was characterised in the context of Prompt Gamma Neutron Activation Analysis (PGNAA) applications. Radiographic films, activation foils and thermoluminescence dosimeters were used to measure the neutron fluence and photon dose rates in the irradiation chamber. A fixed-source MCNPX model of the beamline and chamber was developed and compared to measurements in the first step towards planning a new irradiation chamber. The high photon background from the reactor results in the saturation of the detector and the current facility configuration yields an intrinsic insensitivity to various elements of interest for PGNAA. These will be addressed in future developments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Using the structure of social networks to map inter-agency relationships in public health services.

PubMed

West, Robert M; House, Allan O; Keen, Justin; Ward, Vicky L

2015-11-01

This article investigates network governance in the context of health and wellbeing services in England, focussing on relationships between managers in a range of services. There are three aims, namely to investigate, (i) the configurations of networks, (ii) the stability of network relationships over time and, (iii) the balance between formal and informal ties that underpin inter-agency relationships. Latent position cluster network models were used to characterise relationships. Managers were asked two questions, both designed to characterise informal relationships. The resulting networks differed substantially from one another in membership. Managers described networks of relationships that spanned organisational boundaries, and that changed substantially over time. The findings suggest that inter-agency co-ordination depends more on informal than on formal relationships. Copyright © 2015 Elsevier Ltd. All rights reserved.

Effect of recent popularity on heat-conduction based recommendation models

NASA Astrophysics Data System (ADS)

Li, Wen-Jun; Dong, Qiang; Shi, Yang-Bo; Fu, Yan; He, Jia-Lin

2017-05-01

Accuracy and diversity are two important measures in evaluating the performance of recommender systems. It has been demonstrated that the recommendation model inspired by the heat conduction process has high diversity yet low accuracy. Many variants have been introduced to improve the accuracy while keeping high diversity, most of which regard the current node-degree of an item as its popularity. However in this way, a few outdated items of large degree may be recommended to an enormous number of users. In this paper, we take the recent popularity (recently increased item degrees) into account in the heat-conduction based methods, and propose accordingly the improved recommendation models. Experimental results on two benchmark data sets show that the accuracy can be largely improved while keeping the high diversity compared with the original models.

Do recommender systems benefit users? a modeling approach

NASA Astrophysics Data System (ADS)

Yeung, Chi Ho

2016-04-01

Recommender systems are present in many web applications to guide purchase choices. They increase sales and benefit sellers, but whether they benefit customers by providing relevant products remains less explored. While in many cases the recommended products are relevant to users, in other cases customers may be tempted to purchase the products only because they are recommended. Here we introduce a model to examine the benefit of recommender systems for users, and find that recommendations from the system can be equivalent to random draws if one always follows the recommendations and seldom purchases according to his or her own preference. Nevertheless, with sufficient information about user preferences, recommendations become accurate and an abrupt transition to this accurate regime is observed for some of the studied algorithms. On the other hand, we find that high estimated accuracy indicated by common accuracy metrics is not necessarily equivalent to high real accuracy in matching users with products. This disagreement between estimated and real accuracy serves as an alarm for operators and researchers who evaluate recommender systems merely with accuracy metrics. We tested our model with a real dataset and observed similar behaviors. Finally, a recommendation approach with improved accuracy is suggested. These results imply that recommender systems can benefit users, but the more frequently a user purchases the recommended products, the less relevant the recommended products are in matching user taste.

Characterising alluvial aquifers in a remote ephemeral catchment (Flinders River, Queensland) using a direct push tracer approach

NASA Astrophysics Data System (ADS)

Taylor, Andrew R.; Smith, Stanley D.; Lamontagne, Sébastien; Suckow, Axel

2018-01-01

The availability of reliable water supplies is a key factor limiting development in northern Australia. However, characterising groundwater resources in this remote part of Australia is challenging due to a lack of existing infrastructure and data. Here, direct push technology (DPT) was used to characterise shallow alluvial aquifers at two locations in the semiarid Flinders River catchment. DPT was used to evaluate the saturated thickness of the aquifer and estimate recharge rates by sampling for environmental tracers in groundwater (major ions, 2H, 18O, 3H and 14C). The alluvium at Fifteen Mile Reserve and Glendalough Station consisted of a mixture of permeable coarse sandy and gravely sediments and less permeable clays and silts. The alluvium was relatively thin (i.e. < 20 m) and, at the time of the investigation, was only partially saturated. Tritium (3H) concentrations in groundwater was ∼1 Tritium Unit (TU), corresponding to a mean residence time for groundwater of about 12 years. The lack of an evaporation signal for the 2H and 18O of groundwater suggests rapid localised recharge from overbank flood events as the primary recharge mechanism. Using the chloride mass balance technique (CMB) and lumped parameter models to interpret patterns in 3H in the aquifer, the mean annual recharge rate varied between 21 and 240 mm/yr. Whilst this recharge rate is relatively high for a semiarid climate, the alluvium is thin and heterogeneous hosting numerous alluvial aquifers with varied connectivity and limited storage capacity. Combining DPT and environmental tracers is a cost-effective strategy to characterise shallow groundwater resources in unconsolidated sedimentary aquifers in remote data sparse areas.

Contact force structure and force chains in 3D sheared granular systems

NASA Astrophysics Data System (ADS)

Mair, Karen; Jettestuen, Espen; Abe, Steffen

2010-05-01

Faults often exhibit accumulations of granular debris, ground up to create a layer of rock flour or fault gouge separating the rigid fault walls. Numerical simulations and laboratory experiments of sheared granular materials, suggest that applied loads are preferentially transmitted across such systems by transient force networks that carry enhanced forces. The characterisation of such features is important since their nature and persistence almost certainly influence the macroscopic mechanical stability of these systems and potentially that of natural faults. 3D numerical simulations of granular shear are a valuable investigation tool since they allow us to track individual particle motions, contact forces and their evolution during applied shear, that are difficult to view directly in laboratory experiments or natural fault zones. In characterising contact force distributions, it is important to use global structure measures that allow meaningful comparisons of granular systems having e.g. different grain size distributions, as may be expected at different stages of a fault's evolution. We therefore use a series of simple measures to characterise the structure, such as distributions and correlations of contact forces that can be mapped onto a force network percolation problem as recently proposed by Ostojic and coworkers for 2D granular systems. This allows the use of measures from percolation theory to both define and characterise the force networks. We demonstrate the application of this method to 3D simulations of a sheared granular material. Importantly, we then compare our measure of the contact force structure with macroscopic frictional behaviour measured at the boundaries of our model to determine the influence of the force networks on macroscopic mechanical stability.

Characterisation of the hydrology of an estuarine wetland

NASA Astrophysics Data System (ADS)

Hughes, Catherine E.; Binning, Philip; Willgoose, Garry R.

1998-11-01

The intertidal zone of estuarine wetlands is characterised by a transition from a saline marine environment to a freshwater environment with increasing distance from tidal streams. An experimental site has been established in an area of mangrove and salt marsh wetland in the Hunter River estuary, Australia, to characterise and provide data for a model of intertidal zone hydrology. The experimental site is designed to monitor water fluxes at a small scale (36 m). A weather station and groundwater monitoring wells have been installed and hydraulic head and tidal levels are monitored over a 10-week period along a short one-dimensional transect covering the transition between the tidal and freshwater systems. Soil properties have been determined in the laboratory and the field. A two-dimensional finite element model of the site was developed using SEEP/W to analyse saturated and unsaturated pore water movement. Modification of the water retention function to model crab hole macropores was found necessary to reproduce the observed aquifer response. Groundwater response to tidal fluctuations was observed to be almost uniform beyond the intertidal zone, due to the presence of highly permeable subsurface sediments below the less permeable surface sediments. Over the 36 m transect, tidal forcing was found to generate incoming fluxes in the order of 0.22 m 3/day per metre width of creek bank during dry periods, partially balanced by evaporative fluxes of about 0.13 m 3/day per metre width. During heavy rainfall periods, rainfall fluxes were about 0.61 m 3/day per metre width, dominating the water balance. Evapotranspiration rates were greater for the salt marsh dominated intertidal zone than the non-tidal zone. Hypersalinity and salt encrustation observed show that evapotranspiration fluxes are very important during non-rainfall periods and are believed to significantly influence salt concentration both in the surface soil matrix and the underlying aquifer.

Rational design of a dual-mode optical and chemical prodrug.

PubMed

McCoy, Colin P; Rooney, Clare; Jones, David S; Gorman, Sean P; Nieuwenhuyzen, Mark

2007-01-01

The purpose of this study is to demonstrate the rational design and behaviour of the first dual-mode optical and chemical prodrug, exemplified by an acetyl salicylic acid-based system. A cyclic 1,4-benzodioxinone prodrug was synthesised by reaction of 3,5-dimethoxybenzoin and acetyl salicoyl chloride with pyridine. After purification by column chromatography and recrystallization, characterization was achieved using infrared and NMR spectroscopies, mass spectrometry, elemental analysis and single crystal X-ray diffraction. Light-triggered drug liberation was characterised via UV-visible spectroscopy following low-power 365 nm irradiation for controlled times. Chemical drug liberation was characterised via UV-visible spectroscopy in pH 5.5 solution. The synthetic method yielded pure prodrug, with full supporting characterisation. Light-triggered drug liberation proceeded at a rate of 8.30x10(-2) s-1, while chemical, hydrolytic liberation proceeded independently at 1.89x10(-3) s-1. The photochemical and hydrolytic reactions were both quantitative. This study demonstrates the first rational dual-mode optical and chemical prodrug, using acetyl salicylic acid as a model, acting as a paradigm for future dual-mode systems. Photochemical drug liberation proceeds 44 times faster than chemical liberation, suggesting potential use in drug-eluting medical devices where an additional burst of drug is required at the onset of infection.

Digital terrain modelling and industrial surface metrology - Converging crafts

USGS Publications Warehouse

Pike, R.J.

2001-01-01

Quantitative characterisation of surface form, increasingly from digital 3-D height data, is cross-disciplinary and can be applied at any scale. Thus, separation of industrial-surface metrology from its Earth-science counterpart, (digital) terrain modelling, is artificial. Their growing convergence presents an opportunity to develop in surface morphometry a unified approach to surface representation. This paper introduces terrain modelling and compares it with metrology, noting their differences and similarities. Examples of potential redundancy among parameters illustrate one of the many issues common to both disciplines. ?? 2001 Elsevier Science Ltd. All rights reserved.

A New Approach to Predict the Fish Fillet Shelf-Life in Presence of Natural Preservative Agents.

PubMed

Giuffrida, Alessandro; Giarratana, Filippo; Valenti, Davide; Muscolino, Daniele; Parisi, Roberta; Parco, Alessio; Marotta, Stefania; Ziino, Graziella; Panebianco, Antonio

2017-04-13

Three data sets concerning the behaviour of spoilage flora of fillets treated with natural preservative substances (NPS) were used to construct a new kind of mathematical predictive model. This model, unlike other ones, allows expressing the antibacterial effect of the NPS separately from the prediction of the growth rate. This approach, based on the introduction of a parameter into the predictive primary model, produced a good fitting of observed data and allowed characterising quantitatively the increase of shelf-life of fillets.

Characterisation of the porcine eyeball as an in-vitro model for dry eye.

PubMed

Menduni, Francesco; Davies, Leon N; Madrid-Costa, D; Fratini, Antonio; Wolffsohn, James S

2018-02-01

To characterise the anatomical parameters of the porcine eye for potentially using it as a laboratory model of dry eye. Anterior chamber depth and angle, corneal curvature, shortest and longest diameter, endothelial cell density, and pachymetry were measured in sixty freshly enucleated porcine eyeballs. Corneal steepest meridian was 7.85±0.32mm, corneal flattest meridian was 8.28±0.32mm, shortest corneal diameter was 12.69±0.58mm, longest corneal diameter was 14.88±0.66mm and central corneal ultrasonic pachymetry was 1009±1μm. Anterior chamber angle was 28.83±4.16°, anterior chamber depth was 1.77±0.27mm, and central corneal thickness measured using OCT was 1248±144μm. Corneal endothelial cell density was 3250±172 cells/mm 2 . Combining different clinical techniques produced a pool of reproducible data on the porcine eye anatomy, which can be used by researchers to assess the viability of using the porcine eye as an in-vitro/ex-vivo model for dry eye. Due to the similar morphology with the human eye, porcine eyeballs may represent a useful and cost effective model to individually study important key factors in the development of dry eye, such as environmental and mechanical stresses. Copyright © 2017 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

Robustness analysis of non-ordinary Petri nets for flexible assembly systems

NASA Astrophysics Data System (ADS)

Hsieh, Fu-Shiung

2010-05-01

Non-ordinary controlled Petri nets (NCPNs) have the advantages to model flexible assembly systems in which multiple identical resources may be required to perform an operation. However, existing studies on NCPNs are still limited. For example, the robustness properties of NCPNs have not been studied. This motivates us to develop an analysis method for NCPNs. Robustness analysis concerns the ability for a system to maintain operation in the presence of uncertainties. It provides an alternative way to analyse a perturbed system without reanalysis. In our previous research, we have analysed the robustness properties of several subclasses of ordinary controlled Petri nets. To study the robustness properties of NCPNs, we augment NCPNs with an uncertainty model, which specifies an upper bound on the uncertainties for each reachable marking. The resulting PN models are called non-ordinary controlled Petri nets with uncertainties (NCPNU). Based on NCPNU, the problem is to characterise the maximal tolerable uncertainties for each reachable marking. The computational complexities to characterise maximal tolerable uncertainties for each reachable marking grow exponentially with the size of the nets. Instead of considering general NCPNU, we limit our scope to a subclass of PN models called non-ordinary controlled flexible assembly Petri net with uncertainties (NCFAPNU) for assembly systems and study its robustness. We will extend the robustness analysis to NCFAPNU. We identify two types of uncertainties under which the liveness of NCFAPNU can be maintained.

A general methodology for inverse estimation of the elastic and anelastic properties of anisotropic open-cell porous materials—with application to a melamine foam

NASA Astrophysics Data System (ADS)

Cuenca, Jacques; Van der Kelen, Christophe; Göransson, Peter

2014-02-01

This paper proposes an inverse estimation method for the characterisation of the elastic and anelastic properties of the frame of anisotropic open-cell foams used for sound absorption. A model of viscoelasticity based on a fractional differential constitutive equation is used, leading to an augmented Hooke's law in the frequency domain, where the elastic and anelastic phenomena appear as distinctive terms in the stiffness matrix. The parameters of the model are nine orthotropic elastic moduli, three angles of orientation of the material principal directions and three parameters governing the anelastic frequency dependence. The inverse estimation consists in numerically fitting the model on a set of transfer functions extracted from a sample of material. The setup uses a seismic-mass measurement repeated in the three directions of space and is placed in a vacuum chamber in order to remove the air from the pores of the sample. The method allows to reconstruct the full frequency-dependent complex stiffness matrix of the frame of an anisotropic open-cell foam and in particular it provides the frequency of maximum energy dissipation by viscoelastic effects. The characterisation of a melamine foam sample is performed and the relation between the fractional-derivative model and other types of parameterisations of the augmented Hooke's law is discussed.

How the health belief model helps the tobacco industry: individuals, choice, and "information".

PubMed

Balbach, Edith D; Smith, Elizabeth A; Malone, Ruth E

2006-12-01

To analyse trial and deposition testimony of tobacco industry executives to determine how they use the concepts of "information" and "choice" and consider how these concepts are related to theoretical models of health behaviour change. We coded and analysed transcripts of trial and deposition testimony of 14 high-level executives representing six companies plus the Tobacco Institute. We conducted an interpretive analysis of industry executives' characterisation of the industry's role as information provider and the agency of tobacco consumers in making "choices". Tobacco industry executives deployed the concept of "information" as a mechanism that shifted to consumers full moral responsibility for the harms caused by tobacco products. The industry's role was characterised as that of impartial supplier of value-free "information", without regard to its quality, accuracy and truthfulness. Tobacco industry legal defences rely on assumptions congruent with and supported by individual rational choice theories, particularly those that emphasise individual, autonomous decision-makers. Tobacco control advocates and health educators must challenge the industry's preferred framing, pointing out that "information" is not value-free. Multi-level, multi-sectoral interventions are critical to tobacco use prevention. Over-reliance on individual and interpersonal rational choice models may have the effect of validating the industry's model of smoking and cessation behaviour, absolving it of responsibility and rendering invisible the "choices" the industry has made and continues to make in promoting the most deadly consumer product ever made.

Optimising the combination dosing strategy of abemaciclib and vemurafenib in BRAF-mutated melanoma xenograft tumours

PubMed Central

Tate, Sonya C; Burke, Teresa F; Hartman, Daisy; Kulanthaivel, Palaniappan; Beckmann, Richard P; Cronier, Damien M

2016-01-01

Background: Resistance to BRAF inhibition is a major cause of treatment failure for BRAF-mutated metastatic melanoma patients. Abemaciclib, a cyclin-dependent kinase 4 and 6 inhibitor, overcomes this resistance in xenograft tumours and offers a promising drug combination. The present work aims to characterise the quantitative pharmacology of the abemaciclib/vemurafenib combination using a semimechanistic pharmacokinetic/pharmacodynamic modelling approach and to identify an optimum dosing regimen for potential clinical evaluation. Methods: A PK/biomarker model was developed to connect abemaciclib/vemurafenib concentrations to changes in MAPK and cell cycle pathway biomarkers in A375 BRAF-mutated melanoma xenografts. Resultant tumour growth inhibition was described by relating (i) MAPK pathway inhibition to apoptosis, (ii) mitotic cell density to tumour growth and, under resistant conditions, (iii) retinoblastoma protein inhibition to cell survival. Results: The model successfully described vemurafenib/abemaciclib-mediated changes in MAPK pathway and cell cycle biomarkers. Initial tumour shrinkage by vemurafenib, acquisition of resistance and subsequent abemaciclib-mediated efficacy were successfully captured and externally validated. Model simulations illustrate the benefit of intermittent vemurafenib therapy over continuous treatment, and indicate that continuous abemaciclib in combination with intermittent vemurafenib offers the potential for considerable tumour regression. Conclusions: The quantitative pharmacology of the abemaciclib/vemurafenib combination was successfully characterised and an optimised, clinically-relevant dosing strategy was identified. PMID:26978007

Flow zone characterisation in a fractured aquifer using spring and open-well T and EC monitoring.

NASA Astrophysics Data System (ADS)

Agbotui, Prodeo; West, Landis; Bottrell, Simon

2017-04-01

The Cretaceous Chalk is a very important aquifer in England, and its relatively high transmissivity derives essentially from a well-developed network of solutionally-enhanced fractures and conduits. Like other fractured aquifers, characterisation and delineation of flow pathways and hence catchment boundaries is important. Determination of flow pathways for source catchment delineation (e.g. identification of safeguarding zones around wells) is critical for the effective management and protection of the groundwater resource. It also determines the areal extent of contamination from known sources, and enables the targeted sampling of flow zones e.g. for monitored natural attenuation (MNA). A rather simplistic conceptualisation of the unconfined chalk aquifer of East Yorkshire is currently used as a basis for numerical simulations: linearly reducing hydraulic conductivity (K) with depth below the maximum groundwater elevation, reducing to a minimum value below the zone of groundwater table fluctuation. This study represents an attempt to improve this conceptualisation via improved characterisation of permeable zones within the aquifer. The methods used are: pumping test drawdown analyses for transmissivity, ambient open-well dilution testing; rainfall, groundwater head, and spring / open-well specific electrical conductance (SEC) and temperature monitoring. Pumping test analyses yield overall well transmissivity; the open-well dilution/monitoring approach identifies inflow, outflow, crossflow zones and direction and rate of flow in wells; seasonal changes in flows in wells and springs reflect the annual recharge and recession cycle and the impact of seasonal hydraulic head variation on the activation/deactivation of permeable pathways. Variations in spring and well-water electrical conductivity / temperature provide insight into groundwater residence times and the degree of isolation of groundwater from atmospheric and soil zone sources of CO2. The results of the study combined with stratigraphic information on the aquifer, allows the characterisation of the development of bedding-controlled features such as solutionally-enhanced fractures or conduits, and the role of steeply inclined normal faults. The results have implications for catchment management because it will inform a refinement and improvement of the regulatory body) groundwater model for assessment, evaluation and protection of groundwater resource. The method and techniques used can be applicable for characterising fractured aquifers in other jurisdictions.

Potential application of item-response theory to interpretation of medical codes in electronic patient records

PubMed Central

2011-01-01

Background Electronic patient records are generally coded using extensive sets of codes but the significance of the utilisation of individual codes may be unclear. Item response theory (IRT) models are used to characterise the psychometric properties of items included in tests and questionnaires. This study asked whether the properties of medical codes in electronic patient records may be characterised through the application of item response theory models. Methods Data were provided by a cohort of 47,845 participants from 414 family practices in the UK General Practice Research Database (GPRD) with a first stroke between 1997 and 2006. Each eligible stroke code, out of a set of 202 OXMIS and Read codes, was coded as either recorded or not recorded for each participant. A two parameter IRT model was fitted using marginal maximum likelihood estimation. Estimated parameters from the model were considered to characterise each code with respect to the latent trait of stroke diagnosis. The location parameter is referred to as a calibration parameter, while the slope parameter is referred to as a discrimination parameter. Results There were 79,874 stroke code occurrences available for analysis. Utilisation of codes varied between family practices with intraclass correlation coefficients of up to 0.25 for the most frequently used codes. IRT analyses were restricted to 110 Read codes. Calibration and discrimination parameters were estimated for 77 (70%) codes that were endorsed for 1,942 stroke patients. Parameters were not estimated for the remaining more frequently used codes. Discrimination parameter values ranged from 0.67 to 2.78, while calibration parameters values ranged from 4.47 to 11.58. The two parameter model gave a better fit to the data than either the one- or three-parameter models. However, high chi-square values for about a fifth of the stroke codes were suggestive of poor item fit. Conclusion The application of item response theory models to coded electronic patient records might potentially contribute to identifying medical codes that offer poor discrimination or low calibration. This might indicate the need for improved coding sets or a requirement for improved clinical coding practice. However, in this study estimates were only obtained for a small proportion of participants and there was some evidence of poor model fit. There was also evidence of variation in the utilisation of codes between family practices raising the possibility that, in practice, properties of codes may vary for different coders. PMID:22176509

Characterising freeze in the UK: applications for the insurance industry

NASA Astrophysics Data System (ADS)

Raven, E. K.; Keef, C.; Busby, K.

2012-04-01

The UK winters of 2009-2010 and 2010-2011 were characterised by prolonged and widespread low temperatures. This was challenging for the UK insurance industry and organisations such as the emergency services, the Highways Agency and British Gas who had to manage the extra demands that resulted. In the 6-day period running to Christmas Eve 2010, British Gas reported 100,000 boiler repair call-outs, whilst those 190,000 homes and businesses left with frozen and subsequently burst pipes contributed to the ABI's estimated £ 900 million in insured losses for December 2010 alone; the highest payout by the industry for damages associated with cold weather. Unfortunately, the severity of these winters made the difference between profit and loss for some primary UK insurance companies. To enable better pricing of premiums in the future, insurance companies are looking to understand the potential risk from cold waves at a local, postcode-level, whilst reinsurance firms seek to determine the accumulated loss across the UK associated with spatially coherent events. Other industry sectors also strive to improve their understanding of weather extremes for planning and management. Underpinning this is the need to statistically characterise the physical hazard. Aimed primarily at the re/insurance industry, we have applied an established methodology for developing statistical event sets and applied this to generate a UK freeze event set. An event set provides a stochastic set of several thousand events over 10's of 1000's of years and is typically applied within probabilistic catastrophe models. Our method applies extreme value theory and dependence modelling to explain low-temperature relationships across the UK and over time using historical records. The resulting event set represents the spatial and temporal dependence of cold waves in the UK and is modelled against household factors that increase the vulnerability to freezing conditions, such as property type, age and condition. By presenting our methodology, we illustrate some of the complex spatial and temporal relationships in UK freeze events and place the past two winters into a statistical context. Furthermore, we demonstrate the application of event sets within catastrophe modelling and risk mapping services.

Prevalence of virulence determinants and antimicrobial resistance among commensal Escherichia coli derived from dairy and beef cattle.

PubMed

Bok, Ewa; Mazurek, Justyna; Stosik, Michał; Wojciech, Magdalena; Baldy-Chudzik, Katarzyna

2015-01-19

Cattle is a reservoir of potentially pathogenic E. coli, bacteria that can represent a significant threat to public health, hence it is crucial to monitor the prevalence of the genetic determinants of virulence and antimicrobial resistance among the E. coli population. The aim of this study was the analysis of the phylogenetic structure, distribution of virulence factors (VFs) and prevalence of antimicrobial resistance among E. coli isolated from two groups of healthy cattle: 50 cows housed in the conventional barn (147 isolates) and 42 cows living on the ecological pasture (118 isolates). The phylogenetic analysis, identification of VFs and antimicrobial resistance genes were based on either multiplex or simplex PCR. The antimicrobial susceptibilities of E. coli were examined using the broth microdilution method. Two statistical approaches were used to analyse the results obtained for two groups of cattle. The relations between the dependent (VFs profiles, antibiotics) and the independent variables were described using the two models. The mixed logit model was used to characterise the prevalence of the analysed factors in the sets of isolates. The univariate logistic regression model was used to characterise the prevalence of these factors in particular animals. Given each model, the odds ratio (OR) and the 95% confidence interval for the population were estimated. The phylogroup B1 was predominant among isolates from beef cattle, while the phylogroups A, B1 and D occurred with equal frequency among isolates from dairy cattle. The frequency of VFs-positive isolates was significantly higher among isolates from beef cattle. E. coli from dairy cattle revealed significantly higher resistance to antibiotics. Some of the tested resistance genes were present among isolates from dairy cattle. Our study showed that the habitat and diet may affect the genetic diversity of commensal E. coli in the cattle. The results suggest that the ecological pasture habitat is related to the increased spreading rate of the VFs, while the barn habitat is characterised by the higher levels of antimicrobial resistance among E. coli.

Size-segregated aerosol in a hot-spot pollution urban area: Chemical composition and three-way source apportionment.

PubMed

Bernardoni, V; Elser, M; Valli, G; Valentini, S; Bigi, A; Fermo, P; Piazzalunga, A; Vecchi, R

2017-12-01

In this work, a comprehensive characterisation and source apportionment of size-segregated aerosol collected using a multistage cascade impactor was performed. The samples were collected during wintertime in Milan (Italy), which is located in the Po Valley, one of the main pollution hot-spot areas in Europe. For every sampling, size-segregated mass concentration, elemental and ionic composition, and levoglucosan concentration were determined. Size-segregated data were inverted using the program MICRON to identify and quantify modal contributions of all the measured components. The detailed chemical characterisation allowed the application of a three-way (3-D) receptor model (implemented using Multilinear Engine) for size-segregated source apportionment and chemical profiles identification. It is noteworthy that - as far as we know - this is the first time that three-way source apportionment is attempted using data of aerosol collected by traditional cascade impactors. Seven factors were identified: wood burning, industry, resuspended dust, regional aerosol, construction works, traffic 1, and traffic 2. Further insights into size-segregated factor profiles suggested that the traffic 1 factor can be associated to diesel vehicles and traffic 2 to gasoline vehicles. The regional aerosol factor resulted to be the main contributor (nearly 50%) to the droplet mode (accumulation sub-mode with modal diameter in the range 0.5-1 μm), whereas the overall contribution from the two factors related to traffic was the most important one in the other size modes (34-41%). The results showed that applying a 3-D receptor model to size-segregated samples allows identifying factors of local and regional origin while receptor modelling on integrated PM fractions usually singles out factors characterised by primary (e.g. industry, traffic, soil dust) and secondary (e.g. ammonium sulphate and nitrate) origin. Furthermore, the results suggested that the information on size-segregated chemical composition in different size classes was exploited by the model to relate primary emissions to rapidly-formed secondary compounds. Copyright © 2017 Elsevier Ltd. All rights reserved.

Prevalence of Virulence Determinants and Antimicrobial Resistance among Commensal Escherichia coli Derived from Dairy and Beef Cattle

PubMed Central

Bok, Ewa; Mazurek, Justyna; Stosik, Michał; Wojciech, Magdalena; Baldy-Chudzik, Katarzyna

2015-01-01

Cattle is a reservoir of potentially pathogenic E. coli, bacteria that can represent a significant threat to public health, hence it is crucial to monitor the prevalence of the genetic determinants of virulence and antimicrobial resistance among the E. coli population. The aim of this study was the analysis of the phylogenetic structure, distribution of virulence factors (VFs) and prevalence of antimicrobial resistance among E. coli isolated from two groups of healthy cattle: 50 cows housed in the conventional barn (147 isolates) and 42 cows living on the ecological pasture (118 isolates). The phylogenetic analysis, identification of VFs and antimicrobial resistance genes were based on either multiplex or simplex PCR. The antimicrobial susceptibilities of E. coli were examined using the broth microdilution method. Two statistical approaches were used to analyse the results obtained for two groups of cattle. The relations between the dependent (VFs profiles, antibiotics) and the independent variables were described using the two models. The mixed logit model was used to characterise the prevalence of the analysed factors in the sets of isolates. The univariate logistic regression model was used to characterise the prevalence of these factors in particular animals. Given each model, the odds ratio (OR) and the 95% confidence interval for the population were estimated. The phylogroup B1 was predominant among isolates from beef cattle, while the phylogroups A, B1 and D occurred with equal frequency among isolates from dairy cattle. The frequency of VFs-positive isolates was significantly higher among isolates from beef cattle. E. coli from dairy cattle revealed significantly higher resistance to antibiotics. Some of the tested resistance genes were present among isolates from dairy cattle. Our study showed that the habitat and diet may affect the genetic diversity of commensal E. coli in the cattle. The results suggest that the ecological pasture habitat is related to the increased spreading rate of the VFs, while the barn habitat is characterised by the higher levels of antimicrobial resistance among E. coli. PMID:25607605

On the origin of bursts and heavy tails in animal dynamics

NASA Astrophysics Data System (ADS)

Reynolds, A. M.

2011-01-01

Over recent years there has been an accumulation of evidence that many animal behaviours are characterised by common scale-invariant patterns of switching between two contrasting activities over a period of time. This is evidenced in mammalian wake-sleep patterns, in the intermittent stop-start locomotion of Drosophila fruit flies, and in the Lévy walk movement patterns of a diverse range of animals in which straight-line movements are punctuated by occasional turns. Here it is shown that these dynamics can be modelled by a stochastic variant of Barabási’s model [A.-L. Barabási, The origin of bursts and heavy tails in human dynamics, Nature 435 (2005) 207-211] for bursts and heavy tails in human dynamics. The new model captures a tension between two competing and conflicting activities. The durations of one type of activity are distributed according to an inverse-square power-law, mirroring the ubiquity of inverse-square power-law scaling seen in empirical data. The durations of the second type of activity follow exponential distributions with characteristic timescales that depend on species and metabolic rates. This again is a common feature of animal behaviour. Bursty human dynamics, on the other hand, are characterised by power-law distributions with scaling exponents close to -1 and -3/2.

An examination of the divergent general, specific, and other criminogenic risk/needs across neuropathic and psychopathic pathways to homicide.

PubMed

Gilligan, D G; Lennings, C J

2011-08-01

The social learning theory underlying Andrews and Bonta's Psychology of Criminal Conduct model has generally been seen as guiding risk assessment, with good relevance to mentally ill as well as non-mentally ill offenders. The current study reports a novel approach to qualitative assessment of 26 murderers found not guilty by reason of insanity (NGRI), divided into two groups--neuropathic offenders characterised by frontal lobe deficits and psychosis and psychopathic murderers characterised by high scores on psychopathy and an absence of neuropathic factors. The findings of the present research support the notion that the two pathways are embedded in two diverging theoretical frameworks of psychopathology and social learning theory, with each corresponding to the neuropathic and psychopathic pathways, respectively. Models of social learning theory may have limited utility to the total mentally disordered offender population overall as they apply more specifically to offenders within special offender groups or perhaps more specifically to offenders with psychopathic characteristics. However, the significantly greater association of the other social, physical, and mental health risk/needs with the neuropathic pathway suggests that pathological models are important for understanding the neuropathic pathway in relation to homicide offence and risk of future violence in NGRI samples.

A rheological and microstructural characterisation of bigels for cosmetic and pharmaceutical uses.

PubMed

Lupi, Francesca R; Shakeel, Ahmad; Greco, Valeria; Oliviero Rossi, Cesare; Baldino, Noemi; Gabriele, Domenico

2016-12-01

Bigels are biphasic systems formed by water-based hydrogels and oil-based organogels, mainly studied, in the last few years, for pharmaceutical and cosmetic application focused on the controlled delivery of both lipophilic and hydrophilic active agents. The rheological properties of bigels depend on both the amount and the rheological characteristics of single structured phases. Moreover, it can be expected that, at large fractions of one of the starting gels, systems more complex than oil-in-water or water-in-oil can be obtained, yielding bicontinuous or matrix-in-matrix arrangement. Model bigels were investigated from a microstructural (i.e. microscopy and electrical conductivity tests) and rheological point of view. The hydrogel was prepared by using a low-methoxyl pectin whereas the organogel was prepared by using olive oil and, as gelator, a mixture of glyceryl stearate and policosanol. Model bigels were obtained by increasing the amount of organogel mixed with the hydrogel, and microstructural characterisation evidenced an organogel-in-hydrogel behaviour for all investigated samples, even though at the highest organogel content a more complex structure seems to arise. A semi-empirical model, based on theoretical equations developed for suspensions of elastic spheres in elastic media, was proposed to relate bigel rheological properties to single phase properties and fractions. Copyright © 2016 Elsevier B.V. All rights reserved.

Characterising Tidal Flow Within AN Energetic Tidal Environment

NASA Astrophysics Data System (ADS)

Neill, S. P.; Goward Brown, A.; Lewis, M. J.

2016-02-01

The Pentland Firth is a highly energetic and complex tidal strait separating the north of Scotland with the Orkney Islands and is a key location for tidal energy exploitation. Topographic features including islands and headlands, combined with bathymetric complexities within the Pentland Firth create turbulent hydrodynamic flows which are difficult to observe. Site selection in tidal energy environments historically focuses on tidal current magnitude. Without consideration for the more complex hydrodynamics of tidal energy environments tidal energy developers may miss the opportunity to tune their devices or create environment specific tidal energy converters in order to harness the greatest potential from site. Fully characterising these tidal energy environments ensures economic energy extraction. Understanding the interaction of energy extraction with the environment will reduce uncertainty in site selection and allow mitigation of any potential environmental concerns. We apply the 3D ROMS model to the Pentland Firth with the aim of resolving uncertainties within tidal energy resource assessment. Flow magnitudes and directions are examined with a focus on tidal phasing and asymmetry and application to sediment dynamics. Using the ROMS model, it is possible to determine the extent to which the tidal resource varies temporally and spatially with tidal energy extraction. Accurately modelling the tidal dynamics within this environment ensures that potential consequences of tidal energy extraction on the surrounding environment are better understood.

Modelling NDE pulse-echo inspection of misorientated planar rough defects using an elastic finite element method

NASA Astrophysics Data System (ADS)

Pettit, J. R.; Walker, A. E.; Lowe, M. J. S.

2015-03-01

Pulse-echo ultrasonic NDE examination of large pressure vessel forgings is a design and construction code requirement in the power generation industry. Such inspections aim to size and characterise potential defects that may have formed during the forging process. Typically these defects have a range of orientations and surface roughnesses which can greatly affect ultrasonic wave scattering behaviour. Ultrasonic modelling techniques can provide insight into defect response and therefore aid in characterisation. However, analytical approaches to solving these scattering problems can become inaccurate, especially when applied to increasingly complex defect geometries. To overcome these limitations a elastic Finite Element (FE) method has been developed to simulate pulse-echo inspections of embedded planar defects. The FE model comprises a significantly reduced spatial domain allowing for a Monte-Carlo based approach to consider multiple realisations of defect orientation and surface roughness. The results confirm that defects aligned perpendicular to the path of beam propagation attenuate ultrasonic signals according to the level of surface roughness. However, for defects orientated away from this plane, surface roughness can increase the magnitude of the scattered component propagating back along the path of the incident beam. This study therefore highlights instances where defect roughness increases the magnitude of ultrasonic scattered signals, as opposed to attenuation which is more often assumed.

Frailty and cardiac rehabilitation: A call to action from the EAPC Cardiac Rehabilitation Section.

PubMed

Vigorito, Carlo; Abreu, Ana; Ambrosetti, Marco; Belardinelli, Romualdo; Corrà, Ugo; Cupples, Margaret; Davos, Constantinos H; Hoefer, Stefan; Iliou, Marie-Christine; Schmid, Jean-Paul; Voeller, Heinz; Doherty, Patrick

2017-04-01

Frailty is a geriatric syndrome characterised by a vulnerability status associated with declining function of multiple physiological systems and loss of physiological reserves. Two main models of frailty have been advanced: the phenotypic model (primary frailty) or deficits accumulation model (secondary frailty), and different instruments have been proposed and validated to measure frailty. However measured, frailty correlates to medical outcomes in the elderly, and has been shown to have prognostic value for patients in different clinical settings, such as in patients with coronary artery disease, after cardiac surgery or transvalvular aortic valve replacement, in patients with chronic heart failure or after left ventricular assist device implantation. The prevalence, clinical and prognostic relevance of frailty in a cardiac rehabilitation setting has not yet been well characterised, despite the increasing frequency of elderly patients in cardiac rehabilitation, where frailty is likely to influence the onset, type and intensity of the exercise training programme and the design of tailored rehabilitative interventions for these patients. Therefore, we need to start looking for frailty in elderly patients entering cardiac rehabilitation programmes and become more familiar with some of the tools to recognise and evaluate the severity of this condition. Furthermore, we need to better understand whether exercise-based cardiac rehabilitation may change the course and the prognosis of frailty in cardiovascular patients.

Neighbourhood looking glass: 360º automated characterisation of the built environment for neighbourhood effects research.

PubMed

Nguyen, Quynh C; Sajjadi, Mehdi; McCullough, Matt; Pham, Minh; Nguyen, Thu T; Yu, Weijun; Meng, Hsien-Wen; Wen, Ming; Li, Feifei; Smith, Ken R; Brunisholz, Kim; Tasdizen, Tolga

2018-03-01

Neighbourhood quality has been connected with an array of health issues, but neighbourhood research has been limited by the lack of methods to characterise large geographical areas. This study uses innovative computer vision methods and a new big data source of street view images to automatically characterise neighbourhood built environments. A total of 430 000 images were obtained using Google's Street View Image API for Salt Lake City, Chicago and Charleston. Convolutional neural networks were used to create indicators of street greenness, crosswalks and building type. We implemented log Poisson regression models to estimate associations between built environment features and individual prevalence of obesity and diabetes in Salt Lake City, controlling for individual-level and zip code-level predisposing characteristics. Computer vision models had an accuracy of 86%-93% compared with manual annotations. Charleston had the highest percentage of green streets (79%), while Chicago had the highest percentage of crosswalks (23%) and commercial buildings/apartments (59%). Built environment characteristics were categorised into tertiles, with the highest tertile serving as the referent group. Individuals living in zip codes with the most green streets, crosswalks and commercial buildings/apartments had relative obesity prevalences that were 25%-28% lower and relative diabetes prevalences that were 12%-18% lower than individuals living in zip codes with the least abundance of these neighbourhood features. Neighbourhood conditions may influence chronic disease outcomes. Google Street View images represent an underused data resource for the construction of built environment features. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Experimental and numerical characterisation of the elasto-plastic properties of bovine trabecular bone and a trabecular bone analogue.

PubMed

Kelly, Nicola; McGarry, J Patrick

2012-05-01

The inelastic pressure dependent compressive behaviour of bovine trabecular bone is investigated through experimental and computational analysis. Two loading configurations are implemented, uniaxial and confined compression, providing two distinct loading paths in the von Mises-pressure stress plane. Experimental results reveal distinctive yielding followed by a constant nominal stress plateau for both uniaxial and confined compression. Computational simulation of the experimental tests using the Drucker-Prager and Mohr-Coulomb plasticity models fails to capture the confined compression behaviour of trabecular bone. The high pressure developed during confined compression does not result in plastic deformation using these formulations, and a near elastic response is computed. In contrast, the crushable foam plasticity models provide accurate simulation of the confined compression tests, with distinctive yield and plateau behaviour being predicted. The elliptical yield surfaces of the crushable foam formulations in the von Mises-pressure stress plane accurately characterise the plastic behaviour of trabecular bone. Results reveal that the hydrostatic yield stress is equal to the uniaxial yield stress for trabecular bone, demonstrating the importance of accurate characterisation and simulation of the pressure dependent plasticity. It is also demonstrated in this study that a commercially available trabecular bone analogue material, cellular rigid polyurethane foam, exhibits similar pressure dependent yield behaviour, despite having a lower stiffness and strength than trabecular bone. This study provides a novel insight into the pressure dependent yield behaviour of trabecular bone, demonstrating the inadequacy of uniaxial testing alone. For the first time, crushable foam plasticity formulations are implemented for trabecular bone. The enhanced understanding of the inelastic behaviour of trabecular bone established in this study will allow for more realistic simulation of orthopaedic device implantation and failure. Copyright © 2011 Elsevier Ltd. All rights reserved.

The neuroendocrine phenotype, genomic profile and therapeutic sensitivity of GEPNET cell lines

PubMed Central

Hofving, Tobias; Arvidsson, Yvonne; Almobarak, Bilal; Inge, Linda; Pfragner, Roswitha; Persson, Marta; Stenman, Göran; Kristiansson, Erik; Johanson, Viktor; Nilsson, Ola

2018-01-01

Experimental models of neuroendocrine tumour disease are scarce, and no comprehensive characterisation of existing gastroenteropancreatic neuroendocrine tumour (GEPNET) cell lines has been reported. In this study, we aimed to define the molecular characteristics and therapeutic sensitivity of these cell lines. We therefore performed immunophenotyping, copy number profiling, whole-exome sequencing and a large-scale inhibitor screening of seven GEPNET cell lines. Four cell lines, GOT1, P-STS, BON-1 and QGP-1, displayed a neuroendocrine phenotype while three others, KRJ-I, L-STS and H-STS, did not. Instead, these three cell lines were identified as lymphoblastoid. Characterisation of remaining authentic GEPNET cell lines by copy number profiling showed that GOT1, among other chromosomal alterations, harboured losses on chromosome 18 encompassing the SMAD4 gene, while P-STS had a loss on 11q. BON-1 had a homozygous loss of CDKN2A and CDKN2B, and QGP-1 harboured amplifications of MDM2 and HMGA2. Whole-exome sequencing revealed both disease-characteristic mutations (e.g. ATRX mutation in QGP-1) and, for patient tumours, rare genetic events (e.g. TP53 mutation in P-STS, BON-1 and QGP-1). A large-scale inhibitor screening showed that cell lines from pancreatic NETs to a greater extent, when compared to small intestinal NETs, were sensitive to inhibitors of MEK. Similarly, neuroendocrine NET cells originating from the small intestine were considerably more sensitive to a group of HDAC inhibitors. Taken together, our results provide a comprehensive characterisation of GEPNET cell lines, demonstrate their relevance as neuroendocrine tumour models and explore their therapeutic sensitivity to a broad range of inhibitors. PMID:29444910

High-sensitivity human papilloma virus genotyping reveals near universal positivity in anal squamous cell carcinoma: different implications for vaccine prevention and prognosis.

PubMed

Baricevic, Ivona; He, Xiaotong; Chakrabarty, Bipasha; Oliver, Anthony W; Bailey, Charles; Summers, Jeff; Hampson, Lynne; Hampson, Ian; Gilbert, Duncan C; Renehan, Andrew G

2015-04-01

Characterisation of human papilloma virus (HPV) infection in anal squamous cell carcinoma (ASCC) may have dual importance: first, aetiological; second, prognostic, informing outcome after chemo-radiotherapy (CRT). We undertook HPV genotyping, and allelic characterisations, to evaluate the aetiological role of HPV while simultaneously evaluating the impact of HPV genotyping on relapse-free (RFS) and overall survival (OS). Dual-primer HPV genotyping (subtypes 6, 11, 16, 18, 31, 33, 45, 52, 58) and DNA sequencing of HPV 16 positive tumours were analysed in 151 consecutively referred ASCCs, previously characterised by immunohistochemistry for p16 expression. In 110 patients treated with CRT, factors influencing RFS and OS were evaluated using univariate and multivariate models. HPV positivity was observed in 95%. HPV 16 accounted for 89%; of these, 64% harboured the T350G E6 variant. HPV 16 positivity was significantly correlated with improved 5-year RFS (62% versus 40%; p = 0.027) and OS (59% versus 38%; p = 0.019). p16 expression was also significantly correlated with improved 5-year RFS (positive versus negative: 65% versus 16%; p < 0.0001) and OS (63% versus 13%; p < 0.0001). In multivariable models that included HPV 16 status, p16 status, sex, and age, p16 expression remained an independent prognostic factor for RFS (p < 0.0001) and OS (p = 0.002). In ASCC, near-universal HPV detection rates were demonstrated, higher than generally reported in the literature, and supporting the development of multivalent HPV vaccinations for prevention. By contrast, p16 negatively, but not HPV 16 genotype, is an independent adverse prognosticator after chemo-radiotherapy in patients with ASCC. Copyright © 2015. Published by Elsevier Ltd.

In-lake Modeling Recommendation Report for Lake Champlain TMDL

EPA Pesticide Factsheets

This report describes the recommended modeling approach for the in-lake modeling component of the Lake Champlain TMDL project. The report was prepared by Tetra Tech, with input from the Lake Champlain modeling workgroup. (TetraTech, 2012b)

Connecting Brain Proteomics with Behavioural Neuroscience in Translational Animal Models of Neuropsychiatric Disorders.

PubMed

Sarnyai, Zoltán; Guest, Paul C

2017-01-01

Modelling psychiatric disorders in animals has been hindered by several challenges related to our poor understanding of the disease causes. This chapter describes recent advances in translational research which may lead to animal models and relevant proteomic biomarkers that can be informative about disease mechanisms and potential new therapeutic targets. The review focuses on the behavioural and molecular correlates in models of schizophrenia and major depressive disorder, as guided by recently established Research Domain Criteria (RDoC). This approach is based on providing proteomic data for aetiologically driven, behaviourally well-characterised animal models to link discovered biomarker candidates with the human disease.

Process-Model Feminism in the Corporate University

ERIC Educational Resources Information Center

Spitzer-Hanks, D. T.

2016-01-01

In a period characterised by worries over the rise of the corporate university, it is important to ask what role feminism plays in the academy, and whether that role is commensurate with feminist values and ethics. Commercial and political pressures brought to bear on the encounter between instructor and student can rob teaching of its efficacy,…

Chronic wasting disease in bank voles: characterisation of the shortest incubation time model for prion diseases

USDA-ARS?s Scientific Manuscript database

In order to assess the susceptibility of bank voles to chronic wasting disease (CWD), we inoculated voles carrying isoleucine or methionine at codon 109 (Bv109I and Bv109M, respectively) with CWD isolates from elk, mule deer and white-tailed deer. Efficient transmission rate (100%) was observed with...

The Student as Co-Producer: Learning from Public Administration about the Student-University Relationship

ERIC Educational Resources Information Center

McCulloch, Alistair

2009-01-01

The dominant metaphor/model used to characterise the relationship of the student to the university, that is, the "student as consumer", is partial and not appropriate to the realities of contemporary higher education. This article suggests that co-production, a concept drawn from the public administration literature, offers a more…

Modelling the Implicit Learning of Phonological Decoding from Training on Whole-Word Spellings and Pronunciations

ERIC Educational Resources Information Center

Pritchard, Stephen C.; Coltheart, Max; Marinus, Eva; Castles, Anne

2016-01-01

Phonological decoding is central to learning to read, and deficits in its acquisition have been linked to reading disorders such as dyslexia. Understanding how this skill is acquired is therefore important for characterising reading difficulties. Decoding can be taught explicitly, or implicitly learned during instruction on whole word spellings…

Transdisciplinary Technology Education: A Characterisation and Some Ideas for Implementation in the University

ERIC Educational Resources Information Center

Aneas, Assumpta

2015-01-01

This paper concerns transdisciplinarity as an educational and research strategy in technological higher education. The starting point of the article will be a synthetic analysis of the nature and demands faced by the university in our complex world, and the models of knowledge that could be activated, developed, and operationalised within it.…

Differentiating Three Conceptualisations of the Relationship between Positive Development and Psychopathology during the Transition to Adulthood

ERIC Educational Resources Information Center

O'Connor, Meredith; Sanson, Ann; Hawkins, Mary T.; Toumbourou, John W.; Letcher, Primrose; Frydenberg, Erica

2011-01-01

The transition to adulthood is characterised by both great potential for positive change and a relatively high incidence of problem outcomes. A multidimensional model of positive development during the transition to adulthood (at 19-20 years) has recently been proposed. However, an unresolved question regarding the nature of positive development…

A critical review of cosmetic treatment outcomes in body dysmorphic disorder.

PubMed

Bowyer, Laura; Krebs, Georgina; Mataix-Cols, David; Veale, David; Monzani, Benedetta

2016-12-01

A high proportion of individuals with body dysmorphic disorder (BDD) undergo cosmetic treatments in an attempt to 'fix' perceived defect/s in their physical appearance. Despite the frequency with which such procedures are sought, few studies have prospectively examined the outcomes of cosmetic procedures in individuals with BDD. This article aims to critically review the literature and discuss the current debate that exists on outcomes of cosmetic treatment for individuals with BDD. An emerging literature suggests the majority of individuals with BDD have poor outcomes after cosmetic interventions; however, based on the current literature, it cannot be fully ruled out that certain individuals with mild BDD and localised appearance concerns may benefit from these interventions. Gaps in the current literature are highlighted, alongside recommendations for future research. Carefully conducted longitudinal studies with well-characterised patient populations are needed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Use of cloud computing in biomedicine.

PubMed

Sobeslav, Vladimir; Maresova, Petra; Krejcar, Ondrej; Franca, Tanos C C; Kuca, Kamil

2016-12-01

Nowadays, biomedicine is characterised by a growing need for processing of large amounts of data in real time. This leads to new requirements for information and communication technologies (ICT). Cloud computing offers a solution to these requirements and provides many advantages, such as cost savings, elasticity and scalability of using ICT. The aim of this paper is to explore the concept of cloud computing and the related use of this concept in the area of biomedicine. Authors offer a comprehensive analysis of the implementation of the cloud computing approach in biomedical research, decomposed into infrastructure, platform and service layer, and a recommendation for processing large amounts of data in biomedicine. Firstly, the paper describes the appropriate forms and technological solutions of cloud computing. Secondly, the high-end computing paradigm of cloud computing aspects is analysed. Finally, the potential and current use of applications in scientific research of this technology in biomedicine is discussed.

A general practice approach to Bell's palsy.

PubMed

Phan, Nga T; Panizza, Benedict; Wallwork, Benjamin

2016-11-01

Bell's palsy is characterised by an acute onset of unilateral, lower motor neuron weakness of the facial nerve in the absence of an identifiable cause. Establishing the correct diagnosis is imperative and choosing the correct treatment options can optimise the likelihood of recovery. This article summarises our understanding of Bell's palsy and the evidence-based management options available for adult patients. The basic assessment should include a thorough history and physical examination as the diagnosis of Bell's palsy is based on exclusion. For confirmed cases of Bell's palsy, corticosteroids are the mainstay of treatment and should be initiated within 72 hours of symptom onset. Antiviral therapy in combination with corticosteroid therapy may confer a small benefit and may be offered on the basis of shared decision making. Currently, no recommendations can be made for acupuncture, physical therapy, electrotherapy or surgical decompression because well-designed studies are lacking and available data are of low quality.

UNCERTAINTY ON RADIATION DOSES ESTIMATED BY BIOLOGICAL AND RETROSPECTIVE PHYSICAL METHODS.

PubMed

Ainsbury, Elizabeth A; Samaga, Daniel; Della Monaca, Sara; Marrale, Maurizio; Bassinet, Celine; Burbidge, Christopher I; Correcher, Virgilio; Discher, Michael; Eakins, Jon; Fattibene, Paola; Güçlü, Inci; Higueras, Manuel; Lund, Eva; Maltar-Strmecki, Nadica; McKeever, Stephen; Rääf, Christopher L; Sholom, Sergey; Veronese, Ivan; Wieser, Albrecht; Woda, Clemens; Trompier, Francois

2018-03-01

Biological and physical retrospective dosimetry are recognised as key techniques to provide individual estimates of dose following unplanned exposures to ionising radiation. Whilst there has been a relatively large amount of recent development in the biological and physical procedures, development of statistical analysis techniques has failed to keep pace. The aim of this paper is to review the current state of the art in uncertainty analysis techniques across the 'EURADOS Working Group 10-Retrospective dosimetry' members, to give concrete examples of implementation of the techniques recommended in the international standards, and to further promote the use of Monte Carlo techniques to support characterisation of uncertainties. It is concluded that sufficient techniques are available and in use by most laboratories for acute, whole body exposures to highly penetrating radiation, but further work will be required to ensure that statistical analysis is always wholly sufficient for the more complex exposure scenarios.

Ophthalmic drug dosage forms: characterisation and research methods.

PubMed

Baranowski, Przemysław; Karolewicz, Bożena; Gajda, Maciej; Pluta, Janusz

2014-01-01

This paper describes hitherto developed drug forms for topical ocular administration, that is, eye drops, ointments, in situ gels, inserts, multicompartment drug delivery systems, and ophthalmic drug forms with bioadhesive properties. Heretofore, many studies have demonstrated that new and more complex ophthalmic drug forms exhibit advantage over traditional ones and are able to increase the bioavailability of the active substance by, among others, reducing the susceptibility of drug forms to defense mechanisms of the human eye, extending contact time of drug with the cornea, increasing the penetration through the complex anatomical structure of the eye, and providing controlled release of drugs into the eye tissues, which allows reducing the drug application frequency. The rest of the paper describes recommended in vitro and in vivo studies to be performed for various ophthalmic drugs forms in order to assess whether the form is acceptable from the perspective of desired properties and patient's compliance.

How reliably can a material be classified as a nanomaterial? Available particle-sizing techniques at work

NASA Astrophysics Data System (ADS)

Babick, Frank; Mielke, Johannes; Wohlleben, Wendel; Weigel, Stefan; Hodoroaba, Vasile-Dan

2016-06-01

Currently established and projected regulatory frameworks require the classification of materials (whether nano or non-nano) as specified by respective definitions, most of which are based on the size of the constituent particles. This brings up the question if currently available techniques for particle size determination are capable of reliably classifying materials that potentially fall under these definitions. In this study, a wide variety of characterisation techniques, including counting, fractionating, and spectroscopic techniques, has been applied to the same set of materials under harmonised conditions. The selected materials comprised well-defined quality control materials (spherical, monodisperse) as well as industrial materials of complex shapes and considerable polydispersity. As a result, each technique could be evaluated with respect to the determination of the number-weighted median size. Recommendations on the most appropriate and efficient use of techniques for different types of material are given.

Transient global amnesia following a whole-body cryotherapy session.

PubMed

Carrard, Justin; Lambert, Anne Chantal; Genné, Daniel

2017-10-13

Whole-body cryotherapy (WBC), which consists of a short exposure to very cold and dry air in special 'cryo-chambers', is believed to reduce inflammation and musculoskeletal pain as well as improve athletes' recovery. This is the case of a 63-year-old male, who presented with transient global amnesia (TGA) after undertaking a WBC session. TGA is a clinical syndrome characterised by a sudden onset of anterograde amnesia, sometimes coupled with a retrograde component, lasting up to 24 hours without other neurological deficits. Even though the patient completely recovered, as expected, in 24 hours, this case highlights that WBC is potentially not as risk free as thought to be initially. To conclude, before WBC can be medically recommended, well-conducted studies investigating the possible adverse events are required. © BMJ Publishing Group Ltd (unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Creep-Fatigue Failure Diagnosis

PubMed Central

Holdsworth, Stuart

2015-01-01

Failure diagnosis invariably involves consideration of both associated material condition and the results of a mechanical analysis of prior operating history. This Review focuses on these aspects with particular reference to creep-fatigue failure diagnosis. Creep-fatigue cracking can be due to a spectrum of loading conditions ranging from pure cyclic to mainly steady loading with infrequent off-load transients. These require a range of mechanical analysis approaches, a number of which are reviewed. The microstructural information revealing material condition can vary with alloy class. In practice, the detail of the consequent cracking mechanism(s) can be camouflaged by oxidation at high temperatures, although the presence of oxide on fracture surfaces can be used to date events leading to failure. Routine laboratory specimen post-test examination is strongly recommended to characterise the detail of deformation and damage accumulation under known and well-controlled loading conditions to improve the effectiveness and efficiency of failure diagnosis. PMID:28793676

[„Kids’ Skills” by Ben Furman – Description and Research Review].

PubMed

Perband, Anke; Haupts, Nadja; Rogner, Josef

2016-01-01

The article describes the programme „Kids’ Skills“ by the Finnish psychiatrist Ben Furman. „Kids’ Skills“ was developed to address behavioural issues in children. It is based on the assumption that children’s behavioural problems should not be pathologized, but can instead be corrected by learning a corresponding skill. The programme is characterised by its focus on strengths and its humorous and playful approach. The 15 steps of “Kids’ Skills” are intended to identify the specific skill, help generate a learning process and continue motivating the child. The authors describe the steps of the programme using a case study. They also address the limited number of existing studies, which have included a telephone and an online survey of practitioners using the programme, as well as case studies. The results of these studies are discussed with regard to their basis in evidence and practical relevance. Continuing research is recommended and possible implementations are suggested.

Challenges in Expanding Access to Dialysis in South Africa-Expensive Modalities, Cost Constraints and Human Rights.

PubMed

Etheredge, Harriet; Fabian, June

2017-07-31

South Africa is a country with two distinct health sectors, which are both characterised by inequalities. Within this context, patients with end stage renal disease face unique and sometimes impenetrable barriers to accessing dialysis. There are a number of reasons for this situation. These include: the South African government's endorsement of discordant, unequal policies, which disadvantage the most vulnerable; a lack of robust national guidelines; and divisive rationing practices, which are ad hoc and place the burden of responsibility for rationing dialysis on the clinician. In this paper, we trace the socio-economic mechanisms of how we have come to be in this situation, and overlay this with a detailed examination of South African legislation. Finally, we make comprehensive practical recommendations for rectifying the situation, which include engagement with key stakeholders, public-private partnerships, and more equitable funding mechanisms.

Suitability of analytical methods to measure solubility for the purpose of nanoregulation.

PubMed

Tantra, Ratna; Bouwmeester, Hans; Bolea, Eduardo; Rey-Castro, Carlos; David, Calin A; Dogné, Jean-Michel; Jarman, John; Laborda, Francisco; Laloy, Julie; Robinson, Kenneth N; Undas, Anna K; van der Zande, Meike

2016-01-01

Solubility is an important physicochemical parameter in nanoregulation. If nanomaterial is completely soluble, then from a risk assessment point of view, its disposal can be treated much in the same way as "ordinary" chemicals, which will simplify testing and characterisation regimes. This review assesses potential techniques for the measurement of nanomaterial solubility and evaluates the performance against a set of analytical criteria (based on satisfying the requirements as governed by the cosmetic regulation as well as the need to quantify the concentration of free (hydrated) ions). Our findings show that no universal method exists. A complementary approach is thus recommended, to comprise an atomic spectrometry-based method in conjunction with an electrochemical (or colorimetric) method. This article shows that although some techniques are more commonly used than others, a huge research gap remains, related with the need to ensure data reliability.

Ophthalmic Drug Dosage Forms: Characterisation and Research Methods

PubMed Central

Baranowski, Przemysław; Karolewicz, Bożena; Gajda, Maciej; Pluta, Janusz

2014-01-01

This paper describes hitherto developed drug forms for topical ocular administration, that is, eye drops, ointments, in situ gels, inserts, multicompartment drug delivery systems, and ophthalmic drug forms with bioadhesive properties. Heretofore, many studies have demonstrated that new and more complex ophthalmic drug forms exhibit advantage over traditional ones and are able to increase the bioavailability of the active substance by, among others, reducing the susceptibility of drug forms to defense mechanisms of the human eye, extending contact time of drug with the cornea, increasing the penetration through the complex anatomical structure of the eye, and providing controlled release of drugs into the eye tissues, which allows reducing the drug application frequency. The rest of the paper describes recommended in vitro and in vivo studies to be performed for various ophthalmic drugs forms in order to assess whether the form is acceptable from the perspective of desired properties and patient's compliance. PMID:24772038

An Inter-Personal Information Sharing Model Based on Personalized Recommendations

NASA Astrophysics Data System (ADS)

Kamei, Koji; Funakoshi, Kaname; Akahani, Jun-Ichi; Satoh, Tetsuji

In this paper, we propose an inter-personal information sharing model among individuals based on personalized recommendations. In the proposed model, we define an information resource as shared between people when both of them consider it important --- not merely when they both possess it. In other words, the model defines the importance of information resources based on personalized recommendations from identifiable acquaintances. The proposed method is based on a collaborative filtering system that focuses on evaluations from identifiable acquaintances. It utilizes both user evaluations for documents and their contents. In other words, each user profile is represented as a matrix of credibility to the other users' evaluations on each domain of interests. We extended the content-based collaborative filtering method to distinguish other users to whom the documents should be recommended. We also applied a concept-based vector space model to represent the domain of interests instead of the previous method which represented them by a term-based vector space model. We introduce a personalized concept-base compiled from each user's information repository to improve the information retrieval in the user's environment. Furthermore, the concept-spaces change from user to user since they reflect the personalities of the users. Because of different concept-spaces, the similarity between a document and a user's interest varies for each user. As a result, a user receives recommendations from other users who have different view points, achieving inter-personal information sharing based on personalized recommendations. This paper also describes an experimental simulation of our information sharing model. In our laboratory, five participants accumulated a personal repository of e-mails and web pages from which they built their own concept-base. Then we estimated the user profiles according to personalized concept-bases and sets of documents which others evaluated. We simulated inter-personal recommendation based on the user profiles and evaluated the performance of the recommendation method by comparing the recommended documents to the result of the content-based collaborative filtering.

New Safety Margins for Melanoma Surgery: Nice Possibility for Drinking of "Just That Cup of Coffee"?

PubMed

Tchernev, Georgi; Chokoeva, Anastasiya Atanasova

2017-06-15

The American Joint Committee on Cancer (AJCC's) skin melanoma surgical treatment recommendations from 2011 are characterised by a prima facie "freedom of choice" regarding how extensive should be the excisions for melanomas with tumour thickness up to 2 mm and melanoma in situ. It is unclear why the recommended surgical security margins vary between 0.5 and 1 cm for melanoma in situ, whereas for melanomas with a tumour thickness of up to 1.99 mm, the range of variation is also between 1 and 2 cm, without specifying when the surgical field should be broader and, narrower, accordingly. This "uncertainty or lack of intent" of the guilders often leads to the same surgical approach to melanomas at different stages, or to a different approach in cases of melanomas at the same stage, in contrast. Therefore, this should be defined as wrong, logically. We present 3 patients with cutaneous melanomas, treated with similar fields of surgical security. Current issues, generated within the framework of melanoma's surgery guided by the recommendations of the AJCC are also discussed. A new surgical approach in patients with melanoma is recommended, discussed for the first time in world literature. We hypothesize that the introduction of a certain recommendations for a 2 cm surgical field in all directions during the initial excision, combined with the parallel performance of a sentinel lymph node biopsy, will lead in fact to several important advantages: 1) avoiding of the secondary excision in at least 70% - 90% of the patients (depending on the tumor thickness), 2) minimizing the risk of lymphatic effusion change and misinterpretation of the sentinel lymph node biopsy's results in patients with secondary excision; 3) optimization of the surgical team's work; 4) minimizing the possibility of unprepared/uninformed personnel to take part in decisions for treating a specific disease such as skin melanoma, 4) facilitating the appropriate patients' group selection at the appropriate stage when involving them in different studies, leading to equal leveling of the initial positions. Whether the proposed approach will be subjected to a detailed discussion of AJCC's expert's remains currently unclear.

Mineralogical, geochemical and radiological characterisation of Selmo Formation in Batman area, Turkey.

PubMed

Isik, Umit; Damla, Nevzat; Akkoca, Dicle Bal; Cevik, Uğur

2012-06-01

This work deals with the mineralogical, geochemical and radiological characterisations of Selmo Formation in Batman neighbourhood. The upper Miocene-Pliocene Selmo Formation is common in the centre of Batman and composed of carbonated sandy claystones and silty-sandy stone lenses. The common whole minerals of the samples are quartz, feldspars, calcite and dolomite. The clay minerals are smectite, illite, chlorite and mixed-layer clay (chlorite-smectite). The geochemical mean values of the samples are 51.7% SiO(2); 12.6% Al(2)O(3); 6.2% Fe(2)O(3); 3.6% MgO; 6.3% CaO; 1.1% Na(2)O; 1.7% K(2)O; 0.8% TiO(2); 0.2% P(2)O(5); 0.1% MnO; and 0.03% Cr(2)O(3). In addition, baseline maps for the concentrations of each radionuclide, the radium equivalent activity and the outdoor gamma dose rate distributions have been plotted for the study area. The mean activity concentrations of (226)Ra, (232)Th, (40)K and (137)Cs were determined to be 32, 24, 210 and 9 Bq kg(-1), respectively. The assessments of the radiological hazard indices, such as radium equivalent activity, absorbed dose rate in air, annual effective dose equivalent, excess lifetime cancer risk, external hazard index and internal hazard index, were calculated and compared with the internationally accepted reference values. This study shows that the concentrations of radioactivities in the measured samples were within the recommended safety limits and did not pose to be any significant source of radiation hazard.

Consensus on the diagnosis, treatment and follow-up of patients with Duchenne muscular dystrophy.

PubMed

Nascimento Osorio, A; Medina Cantillo, J; Camacho Salas, A; Madruga Garrido, M; Vilchez Padilla, J J

2018-03-09

Duchenne muscular dystrophy (DMD) is the most common myopathy in children, with a worldwide prevalence of approximately 0.5 cases per 10,000 male births. It is characterised by a progressive muscular weakness manifesting in early childhood, with the subsequent appearance of musculoskeletal, respiratory, and cardiac complications, causing disability, dependence, and premature death. Currently, DMD is mainly managed with multidisciplinary symptomatic treatment, with favourable results in terms of the progression of the disease. It is therefore crucial to establish clear, up-to-date guidelines enabling early detection, appropriate treatment, and monitoring of possible complications. We performed a literature search of the main biomedical databases for articles published in the last 10years in order to obtain an overview of the issues addressed by current guidelines and to identify relevant issues for which no consensus has yet been established. The degree of evidence and level of recommendation of the information obtained were classified and ordered according to the criteria of the American Academy of Neurology. DMD management should be multidisciplinary and adapted to the patient's profile and the stage of clinical progression. In addition to corticotherapy, treatment targeting gastrointestinal, respiratory, cardiac, and orthopaedic problems, as well as physiotherapy, should be provided with a view to improving patients' quality of life. Genetic studies play a key role in the management of the disease, both in detecting cases and potential carriers and in characterising the mutation involved and developing new therapies. Copyright © 2018 Sociedad Española de Neurología. Publicado por Elsevier España, S.L.U. All rights reserved.

Characterisation of chemical composition and energy content of green waste and municipal solid waste from Greater Brisbane, Australia.

PubMed

Hla, San Shwe; Roberts, Daniel

2015-07-01

The development and deployment of thermochemical waste-to-energy systems requires an understanding of the fundamental characteristics of waste streams. Despite Australia's growing interest in gasification of waste streams, no data are available on their thermochemical properties. This work presents, for the first time, a characterisation of green waste and municipal solid waste in terms of chemistry and energy content. The study took place in Brisbane, the capital city of Queensland. The municipal solid waste was hand-sorted and classified into ten groups, including non-combustibles. The chemical properties of the combustible portion of municipal solid waste were measured directly and compared with calculations made based on their weight ratios in the overall municipal solid waste. The results obtained from both methods were in good agreement. The moisture content of green waste ranged from 29% to 46%. This variability - and the tendency for soil material to contaminate the samples - was the main contributor to the variation of samples' energy content, which ranged between 7.8 and 10.7MJ/kg. The total moisture content of food wastes and garden wastes was as high as 70% and 60%, respectively, while the total moisture content of non-packaging plastics was as low as 2.2%. The overall energy content (lower heating value on a wet basis, LHVwb) of the municipal solid waste was 7.9MJ/kg, which is well above the World Bank-recommended value for utilisation in thermochemical conversion processes. Copyright © 2015 Elsevier Ltd. All rights reserved.

Molecular characterisation of methicillin-resistant Staphylococcus aureus (MRSA) isolated at a large referral hospital in Zambia.

PubMed

Samutela, Mulemba Tillika; Kalonda, Annie; Mwansa, James; Lukwesa-Musyani, Chileshe; Mwaba, John; Mumbula, Enoch Mulowa; Mwenya, Darlington; Simulundu, Edgar; Kwenda, Geoffrey

2017-01-01

Methicillin-resistant Staphylococcus aureus (MRSA) is globally recognized as an important public health problem. Whereas comprehensive molecular typing data of MRSA strains is available, particularly in Europe, North America and Australia, similar information is very limited in sub-Saharan Africa including Zambia. In this study, thirty two clinical isolates of Staphylococcus aureus , collected at a large referral hospital in Lusaka, Zambia between June 2009 and December 2012 were analysed by Staphylococcal cassette chromosome mec (SCCmec), Staphylococcus protein A gene typing (spa) and detection of the Panton-Valentine Leukocidin genes (pvl) . Three SCC mec types were identified namely SCC mec type IV (65.6%), SCCmec type III (21.9%), SCC mec type I (3.1%). Nine point four percent (9.4%) of the isolates were untypable. Five spa types, which included a novel type, were detected and the most prevalent spa type was t064 (40.6%). Other spa types included spa types t2104 (31.3%), t355 (3.1%) and t1257 (21.9%). The pvl genes were detected in 3 out of 32 isolates. These molecular typing data indicated that the MRSA strains collected in Lusaka were diverse. Although the source of these MRSA was not established, these results stress the need for assessing infection prevention and control procedures at this health-care facility in order to curtail possible nosocomial infections. Furthermore, country-wide surveillance of MRSA in both the community and health-care facilities is recommended for infection prevention and control. To our knowledge, this represents the first study to characterise MRSA using molecular tools in Zambia.

Homogeneity of the geochemical reference material BRP-1 (paraná basin basalt) and assessment of minimum mass

USGS Publications Warehouse

Cotta, Aloisio J. B.; Enzweiler, Jacinta; Wilson, Stephen A.; Perez, Carlos A.; Nardy, Antonio J. R.; Larizzatti, Joao H.

2007-01-01

Reference materials (RM) are required for quantitative analyses and their successful use is associated with the degree of homogeneity, and the traceability and confidence limits of the values established by characterisation. During the production of a RM, the chemical characterisation can only commence after it has been demonstrated that the material has the required level of homogeneity. Here we describe the preparation of BRP-1, a proposed geochemical reference material, and the results of the tests to evaluate its degree of homogeneity between and within bottles. BRP-1 is the first of two geochemical RM being produced by Brazilian institutions in collaboration with the United States Geological Survey (USGS) and the International Association of Geoanalysts (IAG). Two test portions of twenty bottles of BRP-1 were analysed by wavelength dispersive-XRF spectrometry and major, minor and eighteen trace elements were determined. The results show that for most of the investigated elements, the units of BRP-1 were homogeneous at conditions approximately three times more rigorous than those strived for by the test of “sufficient homogeneity”. Furthermore, the within bottle homogeneity of BRP-1 was evaluated using small beam (1 mm2) synchrotron radiation XRF spectrometry and, for comparison, the USGS reference materials BCR-2 and GSP-2 were also evaluated. From our data, it has been possible to assign representative minimum masses for some major constituents (1 mg) and for some trace elements (1-13 mg), except Zr in GSP-2, for which test portions of 74 mg are recommended.

Chemically characterized Mentha cardiaca L. essential oil as plant based preservative in view of efficacy against biodeteriorating fungi of dry fruits, aflatoxin secretion, lipid peroxidation and safety profile assessment.

PubMed

Dwivedy, Abhishek Kumar; Prakash, Bhanu; Chanotiya, Chandan Singh; Bisht, Deepa; Dubey, Nawal Kishore

2017-08-01

The study reports Mentha cardiaca essential oil (EO) as plant based preservative against fungal and aflatoxin contamination of stored dry fruits. Mycoflora analysis of the dry fruits revealed Aspergillus favus LHP-PV-1 as the most aflatoxigenic isolate with highest Aflatoxin B 1 content. M. cardiaca EO showed broad fungitoxic spectrum inhibiting the tested moulds contaminating dry fruits. It's minimum inhibitory concentration (MIC), minimum aflatoxin inhibitory concentration (MAIC) and minimum fungicidal concentration (MFC) against A. favus LHP-PV-1 were recorded to be 1.25, 1.0 and 2.25 µL/mL respectively. The EO caused decrease in ergosterol content and enhanced leakage of Ca 2+ , K + and Mg 2+ ions from treated fungal cells, depicting fungal plasma membrane as the site of antifungal action. The EO showed promising DPPH free radical scavenging activity (IC 50 value:15.89 µL/mL) and favourable safety profile with LD 50 value (7133.70 mg/kg body wt.) when estimated through acute oral toxicity on mice. Carvone (61.62%) was recorded as the major component of the oil during chemical characterisation through GC-MS. Based on strong antifungal, antiaflatoxigenic and antioxidant potential, the chemically characterised M. cardiaca EO may be recommended as safe plant based preservative and shelf life enhancer of food items. This is the first report on antifungal and antiaflatoxigenic activity of M. cardiaca EO. Copyright © 2017 Elsevier Ltd. All rights reserved.

Mobile applications to enhance self-management of gout.

PubMed

Nguyen, Amy D; Baysari, Melissa T; Kannangara, Diluk R W; Tariq, Amina; Lau, Annie Y S; Westbrook, Johanna I; Day, Richard O

2016-10-01

Gout is an arthritic condition that is characterised by extremely painful, debilitating acute attacks and eventual joint and organ damage if not controlled. Despite the availability of very effective therapies that, if adhered to, will prevent acute attacks and long-term damage, the disorder is increasingly prevalent. There is an urgent need to improve self-management of gout. Mobile health (mHealth) applications ('apps'), designed to facilitate management of chronic conditions, present novel opportunities for supporting patient self-management of gout. The aim of this review was to assess features of available gout management apps designed to assist consumers in managing their gout and their consistency with guidelines for gout management. English-language, smart-device apps designed to assist self-management of gout were identified using search term "gout" and downloaded from Apple and Google Play app stores. To be included in the review, apps had to allow users to monitor their gout disease (e.g. serum uric acid (sUA) tracking, record acute attacks) and/or educate patients about gout. Investigators derived patient-focused recommendations for gout management from contemporary guidelines. Features of reviewed apps were independently assessed by two reviewers for their facilitation of these recommendations. The search identified 57 apps possibly relevant to gout management, of which six met the inclusion criteria. One app incorporated all recommendations for patient-focused gout management from guidelines including monitoring sUA, recording attacks and lifestyle advice. However, the majority of these elements were not functional within the app, and instead required users to manually complete printouts. Currently, only one app exists that includes all recommendations to facilitate patient self-management of gout, however some features can only be actioned manually. Given the lack of progress in achieving better patient outcomes and the promise of mHealth interventions to deliver significant gains, new or updated gout management apps are required to promote successful self-management of this chronic disease. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Potential of Sr isotopic analysis in ceramic provenance studies: Characterisation of Chinese stonewares

NASA Astrophysics Data System (ADS)

Li, Bao-Ping; Zhao, Jian-Xin; Greig, Alan; Collerson, Kenneth D.; Zhuo, Zhen-Xi; Feng, Yue-Xin

2005-11-01

We compare the trace element and Sr isotopic compositions of stoneware bodies made in Yaozhou and Jizhou to characterise these Chinese archaeological ceramics and examine the potential of Sr isotopes in provenance studies. Element concentrations determined by ICP-MS achieve distinct characterisation for Jizhou samples due to their restricted variation, yet had limited success with Yaozhou wares because of their large variability. In contrast, 87Sr/86Sr ratios in Yaozhou samples have a very small variation and are all significantly lower than those of Jizhou samples, which show a large variation and cannot be well characterised with Sr isotopes. Geochemical interpretation reveals that 87Sr/86Sr ratios will have greater potential to characterise ceramics made of low Rb/Sr materials such as kaolin clay, yet will show larger variations in ceramics made of high Rb/Sr materials such as porcelain stone.

Characterisation of nanomaterial hydrophobicity using engineered surfaces

NASA Astrophysics Data System (ADS)

Desmet, Cloé; Valsesia, Andrea; Oddo, Arianna; Ceccone, Giacomo; Spampinato, Valentina; Rossi, François; Colpo, Pascal

2017-03-01

Characterisation of engineered nanomaterials (NMs) is of outmost importance for the assessment of the potential risks arising from their extensive use. NMs display indeed a large variety of physico-chemical properties that drastically affect their interaction with biological systems. Among them, hydrophobicity is an important property that is nevertheless only slightly covered by the current physico-chemical characterisation techniques. In this work, we developed a method for the direct characterisation of NM hydrophobicity. The determination of the nanomaterial hydrophobic character is carried out by the direct measurement of the affinity of the NMs for different collectors. Each collector is an engineered surface designed in order to present specific surface charge and hydrophobicity degrees. Being thus characterised by a combination of surface energy components, the collectors enable the NM immobilisation with surface coverage in relation to their hydrophobicity. The experimental results are explained by using the extended DLVO theory, which takes into account the hydrophobic forces acting between NMs and collectors.

Unified viscoelasticity: Applying discrete element models to soft tissues with two characteristic times.

PubMed

Anssari-Benam, Afshin; Bucchi, Andrea; Bader, Dan L

2015-09-18

Discrete element models have often been the primary tool in investigating and characterising the viscoelastic behaviour of soft tissues. However, studies have employed varied configurations of these models, based on the choice of the number of elements and the utilised formation, for different subject tissues. This approach has yielded a diverse array of viscoelastic models in the literature, each seemingly resulting in different descriptions of viscoelastic constitutive behaviour and/or stress-relaxation and creep functions. Moreover, most studies do not apply a single discrete element model to characterise both stress-relaxation and creep behaviours of tissues. The underlying assumption for this disparity is the implicit perception that the viscoelasticity of soft tissues cannot be described by a universal behaviour or law, resulting in the lack of a unified approach in the literature based on discrete element representations. This paper derives the constitutive equation for different viscoelastic models applicable to soft tissues with two characteristic times. It demonstrates that all possible configurations exhibit a unified and universal behaviour, captured by a single constitutive relationship between stress, strain and time as: σ+Aσ̇+Bσ¨=Pε̇+Qε¨. The ensuing stress-relaxation G(t) and creep J(t) functions are also unified and universal, derived as [Formula: see text] and J(t)=c2+(ε0-c2)e(-PQt)+σ0Pt, respectively. Application of these relationships to experimental data is illustrated for various tissues including the aortic valve, ligament and cerebral artery. The unified model presented in this paper may be applied to all tissues with two characteristic times, obviating the need for employing varied configurations of discrete element models in preliminary investigation of the viscoelastic behaviour of soft tissues. Copyright © 2015 Elsevier Ltd. All rights reserved.

Development of modelling method selection tool for health services management: from problem structuring methods to modelling and simulation methods.

PubMed

Jun, Gyuchan T; Morris, Zoe; Eldabi, Tillal; Harper, Paul; Naseer, Aisha; Patel, Brijesh; Clarkson, John P

2011-05-19

There is an increasing recognition that modelling and simulation can assist in the process of designing health care policies, strategies and operations. However, the current use is limited and answers to questions such as what methods to use and when remain somewhat underdeveloped. The aim of this study is to provide a mechanism for decision makers in health services planning and management to compare a broad range of modelling and simulation methods so that they can better select and use them or better commission relevant modelling and simulation work. This paper proposes a modelling and simulation method comparison and selection tool developed from a comprehensive literature review, the research team's extensive expertise and inputs from potential users. Twenty-eight different methods were identified, characterised by their relevance to different application areas, project life cycle stages, types of output and levels of insight, and four input resources required (time, money, knowledge and data). The characterisation is presented in matrix forms to allow quick comparison and selection. This paper also highlights significant knowledge gaps in the existing literature when assessing the applicability of particular approaches to health services management, where modelling and simulation skills are scarce let alone money and time. A modelling and simulation method comparison and selection tool is developed to assist with the selection of methods appropriate to supporting specific decision making processes. In particular it addresses the issue of which method is most appropriate to which specific health services management problem, what the user might expect to be obtained from the method, and what is required to use the method. In summary, we believe the tool adds value to the scarce existing literature on methods comparison and selection.

Emissions and fate of brominated flame retardants in the indoor environment: a critical review of modelling approaches.

PubMed

Liagkouridis, Ioannis; Cousins, Ian T; Cousins, Anna Palm

2014-09-01

This review explores the existing understanding and the available approaches to estimating the emissions and fate of semi-volatile organic compounds (SVOCs) and in particular focuses on the brominated flame retardants (BFRs). Volatilisation, an important emission mechanism for the more volatile compounds can be well described using current emission models. More research is needed, however, to better characterise alternative release mechanisms such as direct material-particle partitioning and material abrasion. These two particle-mediated emissions are likely to result in an increased chemical release from the source than can be accounted for by volatilisation, especially for low volatile compounds, and emission models need to be updated in order to account for these. Air-surface partitioning is an important fate process for SVOCs such as BFRs however it is still not well characterised indoors. In addition, the assumption of an instantaneous air-particle equilibrium adopted by current indoor fate models might not be valid for high-molecular weight, strongly sorbing compounds. A better description of indoor particle dynamics is required to assess the effect of particle-associated transport as this will control the fate of low volatile BFRs. We suggest further research steps that will improve modelling precision and increase our understanding of the factors that govern the indoor fate of a wide range of SVOCs. It is also considered that the appropriateness of the selected model for a given study relies on the individual characteristics of the study environment and scope of the study. Copyright © 2014 Elsevier B.V. All rights reserved.

A model of economic growth with physical and human capital: The role of time delays.

PubMed

Gori, Luca; Guerrini, Luca; Sodini, Mauro

2016-09-01

This article aims at analysing a two-sector economic growth model with discrete delays. The focus is on the dynamic properties of the emerging system. In particular, this study concentrates on the stability properties of the stationary solution, characterised by analytical results and geometrical techniques (stability crossing curves), and the conditions under which oscillatory dynamics emerge (through Hopf bifurcations). In addition, this article proposes some numerical simulations to illustrate the behaviour of the system when the stationary equilibrium is unstable.

Terminology, concepts, and models in genetic epidemiology.

PubMed

Teare, M Dawn; Koref, Mauro F Santibàñez

2011-01-01

Genetic epidemiology brings together approaches and techniques developed in mathematical genetics and statistics, medical genetics, quantitative genetics, and epidemiology. In the 1980s, the focus was on the mapping and identification of genes where defects had large effects at the individual level. More recently, statistical and experimental advances have made possible to identify and characterise genes associated with small effects at the individual level. In this chapter, we provide a brief outline of the models, concepts, and terminology used in genetic epidemiology.

Conduction cooled compact laser for the supercam Libsraman instrument

NASA Astrophysics Data System (ADS)

Durand, Eric; Derycke, C.; Boudjemaa, L.; Simon-Boisson, C.; Roucayrol, L.; Perez, R.; Faure, B.; Maurice, S.

2017-09-01

A new conduction cooled compact laser for SuperCam LIBS-RAMAN instrument aboard Mars 2020 Rover is presented. An oscillator generates 30mJ at 1µm with a good spatial quality. A Second Harmonic Generator (SHG) at the oscillator output generates 15 mJ at 532 nm. A RTP electro-optical switch, between the oscillator and SHG, allows the operation mode selection (LIBS or RAMAN). Qualification model of this laser has been built and characterised. Environmental testing of this model is also reported.

A Policy Language for Modelling Recommendations

NASA Astrophysics Data System (ADS)

Abou El Kalam, Anas; Balbiani, Philippe

While current and emergent applications become more and more complex, most of existing security policies and models only consider a yes/no response to the access requests. Consequently, modelling, formalizing and implementing permissions, obligations and prohibitions do not cover the richness of all the possible scenarios. In fact, several applications have access rules with the recommendation access modality. In this paper we focus on the problem of formalizing security policies with recommendation needs. The aim is to provide a generic domain-independent formal system for modelling not only permissions, prohibitions and obligations, but also recommendations. In this respect, we present our logic-based language, the semantics, the truth conditions, our axiomatic as well as inference rules. We also give a representative use case with our specification of recommendation requirements. Finally, we explain how our logical framework could be used to query the security policy and to check its consistency.

Entanglement hamiltonian and entanglement contour in inhomogeneous 1D critical systems

NASA Astrophysics Data System (ADS)

Tonni, Erik; Rodríguez-Laguna, Javier; Sierra, Germán

2018-04-01

Inhomogeneous quantum critical systems in one spatial dimension have been studied by using conformal field theory in static curved backgrounds. Two interesting examples are the free fermion gas in the harmonic trap and the inhomogeneous XX spin chain called rainbow chain. For conformal field theories defined on static curved spacetimes characterised by a metric which is Weyl equivalent to the flat metric, with the Weyl factor depending only on the spatial coordinate, we study the entanglement hamiltonian and the entanglement spectrum of an interval adjacent to the boundary of a segment where the same boundary condition is imposed at the endpoints. A contour function for the entanglement entropies corresponding to this configuration is also considered, being closely related to the entanglement hamiltonian. The analytic expressions obtained by considering the curved spacetime which characterises the rainbow model have been checked against numerical data for the rainbow chain, finding an excellent agreement.

Mapping forces in a 3D elastic assembly of grains

NASA Astrophysics Data System (ADS)

Saadatfar, Mohammad; Sheppard, Adrian P.; Senden, Tim J.; Kabla, Alexandre J.

2012-01-01

Our understanding of the elasticity and rheology of disordered materials, such as granular piles, foams, emulsions or dense suspensions relies on improving experimental tools to characterise their behaviour at the particle scale. While 2D observations are now routinely carried out in laboratories, 3D measurements remain a challenge. In this paper, we use a simple model system, a packing of soft elastic spheres, to illustrate the capability of X-ray microtomography to characterise the internal structure and local behaviour of granular systems. Image analysis techniques can resolve grain positions, shapes and contact areas; this is used to investigate the material's microstructure and its evolution upon strain. In addition to morphological measurements, we develop a technique to quantify contact forces and estimate the internal stress tensor. As will be illustrated in this paper, this opens the door to a broad array of static and dynamical measurements in 3D disordered systems.

Obesity and stroke: Can we translate from rodents to patients?

PubMed Central

Haley, Michael J

2016-01-01

Obesity is a risk factor for stroke and is consequently one of the most common co-morbidities found in patients. There is therefore an identified need to model co-morbidities preclinically to allow better translation from bench to bedside. In preclinical studies, both diet-induced and genetically obese rodents have worse stroke outcome, characterised by increased ischaemic damage and an altered inflammatory response. However, clinical studies have reported an ‘obesity paradox’ in stroke, characterised by reduced mortality and morbidity in obese patients. We discuss the potential reasons why the preclinical and clinical studies may not agree, and review the mechanisms identified in preclinical studies through which obesity may affects stroke outcome. We suggest inflammation plays a central role in this relationship, as obesity features increases in inflammatory mediators such as C-reactive protein and interleukin-6, and chronic inflammation has been linked to worse stroke risk and outcome. PMID:27655337

Live Cell Characterization of DNA Aggregation Delivered through Lipofection

PubMed Central

Mieruszynski, Stephen; Briggs, Candida; Digman, Michelle A.; Gratton, Enrico; Jones, Mark R

2015-01-01

DNA trafficking phenomena, such as information on where and to what extent DNA aggregation occurs, have yet to be fully characterised in the live cell. Here we characterise the aggregation of DNA when delivered through lipofection by applying the Number and Brightness (N&B) approach. The N&B analysis demonstrates extensive aggregation throughout the live cell with DNA clusters in the extremity of the cell and peri-nuclear areas. Once within the nucleus aggregation had decreased 3-fold. In addition, we show that increasing serum concentration of cell media results in greater cytoplasmic aggregation. Further, the effects of the DNA fragment size on aggregation was explored, where larger DNA constructs exhibited less aggregation. This study demonstrates the first quantification of DNA aggregation when delivered through lipofection in live cells. In addition, this study has presents a model for alternative uses of this imaging approach, which was originally developed to study protein oligomerization and aggregation. PMID:26013547

Enabling three-dimensional densitometric measurements using laboratory source X-ray micro-computed tomography

NASA Astrophysics Data System (ADS)

Pankhurst, M. J.; Fowler, R.; Courtois, L.; Nonni, S.; Zuddas, F.; Atwood, R. C.; Davis, G. R.; Lee, P. D.

2018-01-01

We present new software allowing significantly improved quantitative mapping of the three-dimensional density distribution of objects using laboratory source polychromatic X-rays via a beam characterisation approach (c.f. filtering or comparison to phantoms). One key advantage is that a precise representation of the specimen material is not required. The method exploits well-established, widely available, non-destructive and increasingly accessible laboratory-source X-ray tomography. Beam characterisation is performed in two stages: (1) projection data are collected through a range of known materials utilising a novel hardware design integrated into the rotation stage; and (2) a Python code optimises a spectral response model of the system. We provide hardware designs for use with a rotation stage able to be tilted, yet the concept is easily adaptable to virtually any laboratory system and sample, and implicitly corrects the image artefact known as beam hardening.

Multicentre external validation of IOTA prediction models and RMI by operators with varied training

PubMed Central

Sayasneh, A; Wynants, L; Preisler, J; Kaijser, J; Johnson, S; Stalder, C; Husicka, R; Abdallah, Y; Raslan, F; Drought, A; Smith, A A; Ghaem-Maghami, S; Epstein, E; Van Calster, B; Timmerman, D; Bourne, T

2013-01-01

Background: Correct characterisation of ovarian tumours is critical to optimise patient care. The purpose of this study is to evaluate the diagnostic performance of the International Ovarian Tumour Analysis (IOTA) logistic regression model (LR2), ultrasound Simple Rules (SR), the Risk of Malignancy Index (RMI) and subjective assessment (SA) for preoperative characterisation of adnexal masses, when ultrasonography is performed by examiners with different background training and experience. Methods: A 2-year prospective multicentre cross-sectional study. Thirty-five level II ultrasound examiners contributed in three UK hospitals. Transvaginal ultrasonography was performed using a standardised approach. The final outcome was the surgical findings and histological diagnosis. To characterise the adnexal masses, the six-variable prediction model (LR2) with a cutoff of 0.1, the RMI with cutoff of 200, ten SR (five rules for malignancy and five rules for benignity) and SA were applied. The area under the curves (AUCs) for performance of LR2 and RMI were calculated. Diagnostic performance measures for all models assessed were sensitivity, specificity, positive and negative likelihood ratios (LR+ and LR−), and the diagnostic odds ratio (DOR). Results: Nine-hundred and sixty-two women with adnexal masses underwent transvaginal ultrasonography, whereas 255 had surgery. Prevalence of malignancy was 29% (49 primary invasive epithelial ovarian cancers, 18 borderline ovarian tumours, and 7 metastatic tumours). The AUCs for LR2 and RMI for all masses were 0.94 (95% confidence interval (CI): 0.89–0.97) and 0.90 (95% CI: 0.83–0.94), respectively. In premenopausal women, LR2−RMI difference was 0.09 (95% CI: 0.03–0.15) compared with −0.02 (95% CI: −0.08 to 0.04) in postmenopausal women. For all masses, the DORs for LR2, RMI, SR+SA (using SA when SR inapplicable), SR+MA (assuming malignancy when SR inapplicable), and SA were 62 (95% CI: 27–142), 43 (95% CI: 19–97), 109 (95% CI: 44–274), 66 (95% CI: 27–158), and 70 (95% CI: 30–163), respectively. Conclusion: Overall, the test performance of IOTA prediction models and rules as well as the RMI was maintained in examiners with varying levels of training and experience. PMID:23674083

Use of Decision Models in the Development of Evidence-Based Clinical Preventive Services Recommendations: Methods of the U.S. Preventive Services Task Force.

PubMed

Owens, Douglas K; Whitlock, Evelyn P; Henderson, Jillian; Pignone, Michael P; Krist, Alex H; Bibbins-Domingo, Kirsten; Curry, Susan J; Davidson, Karina W; Ebell, Mark; Gillman, Matthew W; Grossman, David C; Kemper, Alex R; Kurth, Ann E; Maciosek, Michael; Siu, Albert L; LeFevre, Michael L

2016-10-04

The U.S. Preventive Services Task Force (USPSTF) develops evidence-based recommendations about preventive care based on comprehensive systematic reviews of the best available evidence. Decision models provide a complementary, quantitative approach to support the USPSTF as it deliberates about the evidence and develops recommendations for clinical and policy use. This article describes the rationale for using modeling, an approach to selecting topics for modeling, and how modeling may inform recommendations about clinical preventive services. Decision modeling is useful when clinical questions remain about how to target an empirically established clinical preventive service at the individual or program level or when complex determinations of magnitude of net benefit, overall or among important subpopulations, are required. Before deciding whether to use decision modeling, the USPSTF assesses whether the benefits and harms of the preventive service have been established empirically, assesses whether there are key issues about applicability or implementation that modeling could address, and then defines the decision problem and key questions to address through modeling. Decision analyses conducted for the USPSTF are expected to follow best practices for modeling. For chosen topics, the USPSTF assesses the strengths and limitations of the systematically reviewed evidence and the modeling analyses and integrates the results of each to make preventive service recommendations.

Ground-based remote sensing of tropospheric water vapour isotopologues within the project MUSICA

NASA Astrophysics Data System (ADS)

Schneider, M.; Barthlott, S.; Hase, F.; González, Y.; Yoshimura, K.; García, O. E.; Sepúlveda, E.; Gomez-Pelaez, A.; Gisi, M.; Kohlhepp, R.; Dohe, S.; Blumenstock, T.; Wiegele, A.; Christner, E.; Strong, K.; Weaver, D.; Palm, M.; Deutscher, N. M.; Warneke, T.; Notholt, J.; Lejeune, B.; Demoulin, P.; Jones, N.; Griffith, D. W. T.; Smale, D.; Robinson, J.

2012-12-01

Within the project MUSICA (MUlti-platform remote Sensing of Isotopologues for investigating the Cycle of Atmospheric water), long-term tropospheric water vapour isotopologue data records are provided for ten globally distributed ground-based mid-infrared remote sensing stations of the NDACC (Network for the Detection of Atmospheric Composition Change). We present a new method allowing for an extensive and straightforward characterisation of the complex nature of such isotopologue remote sensing datasets. We demonstrate that the MUSICA humidity profiles are representative for most of the troposphere with a vertical resolution ranging from about 2 km (in the lower troposphere) to 8 km (in the upper troposphere) and with an estimated precision of better than 10%. We find that the sensitivity with respect to the isotopologue composition is limited to the lower and middle troposphere, whereby we estimate a precision of about 30‰ for the ratio between the two isotopologues HD16O and H216O. The measurement noise, the applied atmospheric temperature profiles, the uncertainty in the spectral baseline, and the cross-dependence on humidity are the leading error sources. We introduce an a posteriori correction method of the cross-dependence on humidity, and we recommend applying it to isotopologue ratio remote sensing datasets in general. In addition, we present mid-infrared CO2 retrievals and use them for demonstrating the MUSICA network-wide data consistency. In order to indicate the potential of long-term isotopologue remote sensing data if provided with a well-documented quality, we present a climatology and compare it to simulations of an isotope incorporated AGCM (Atmospheric General Circulation Model). We identify differences in the multi-year mean and seasonal cycles that significantly exceed the estimated errors, thereby indicating deficits in the modeled atmospheric water cycle.

Ground-based remote sensing of tropospheric water vapour isotopologues within the project MUSICA

NASA Astrophysics Data System (ADS)

Schneider, M.; Barthlott, S.; Hase, F.; González, Y.; Yoshimura, K.; García, O. E.; Sepúlveda, E.; Gomez-Pelaez, A.; Gisi, M.; Kohlhepp, R.; Dohe, S.; Blumenstock, T.; Strong, K.; Weaver, D.; Palm, M.; Deutscher, N. M.; Warneke, T.; Notholt, J.; Lejeune, B.; Demoulin, P.; Jones, N.; Griffith, D. W. T.; Smale, D.; Robinson, J.

2012-08-01

Within the project MUSICA (MUlti-platform remote Sensing of Isotopologues for investigating the Cycle of Atmospheric water), long-term tropospheric water vapour isotopologues data records are provided for ten globally distributed ground-based mid-infrared remote sensing stations of the NDACC (Network for the Detection of Atmospheric Composition Change). We present a new method allowing for an extensive and straightforward characterisation of the complex nature of such isotopologue remote sensing datasets. We demonstrate that the MUSICA humidity profiles are representative for most of the troposphere with a vertical resolution ranging from about 2 km (in the lower troposphere) to 8 km (in the upper troposphere) and with an estimated precision of better than 10%. We find that the sensitivity with respect to the isotopologue composition is limited to the lower and middle troposphere, whereby we estimate a precision of about 30‰ for the ratio between the two isotopologues HD16O and H216O. The measurement noise, the applied atmospheric temperature profiles, the uncertainty in the spectral baseline, and interferences from humidity are the leading error sources. We introduce an a posteriori correction method of the humidity interference error and we recommend applying it for isotopologue ratio remote sensing datasets in general. In addition, we present mid-infrared CO2 retrievals and use them for demonstrating the MUSICA network-wide data consistency. In order to indicate the potential of long-term isotopologue remote sensing data if provided with a well-documented quality, we present a climatology and compare it to simulations of an isotope incorporated AGCM (Atmospheric General Circulation Model). We identify differences in the multi-year mean and seasonal cycles that significantly exceed the estimated errors, thereby indicating deficits in the modeled atmospheric water cycle.

Enhancing the use of Argos satellite data for home range and long distance migration studies of marine animals.

PubMed

Hoenner, Xavier; Whiting, Scott D; Hindell, Mark A; McMahon, Clive R

2012-01-01

Accurately quantifying animals' spatial utilisation is critical for conservation, but has long remained an elusive goal due to technological impediments. The Argos telemetry system has been extensively used to remotely track marine animals, however location estimates are characterised by substantial spatial error. State-space models (SSM) constitute a robust statistical approach to refine Argos tracking data by accounting for observation errors and stochasticity in animal movement. Despite their wide use in ecology, few studies have thoroughly quantified the error associated with SSM predicted locations and no research has assessed their validity for describing animal movement behaviour. We compared home ranges and migratory pathways of seven hawksbill sea turtles (Eretmochelys imbricata) estimated from (a) highly accurate Fastloc GPS data and (b) locations computed using common Argos data analytical approaches. Argos 68(th) percentile error was <1 km for LC 1, 2, and 3 while markedly less accurate (>4 km) for LC ≤ 0. Argos error structure was highly longitudinally skewed and was, for all LC, adequately modelled by a Student's t distribution. Both habitat use and migration routes were best recreated using SSM locations post-processed by re-adding good Argos positions (LC 1, 2 and 3) and filtering terrestrial points (mean distance to migratory tracks ± SD = 2.2 ± 2.4 km; mean home range overlap and error ratio = 92.2% and 285.6 respectively). This parsimonious and objective statistical procedure however still markedly overestimated true home range sizes, especially for animals exhibiting restricted movements. Post-processing SSM locations nonetheless constitutes the best analytical technique for remotely sensed Argos tracking data and we therefore recommend using this approach to rework historical Argos datasets for better estimation of animal spatial utilisation for research and evidence-based conservation purposes.

Watershed Modeling Recommendation Report for Lake Champlain TMDL

EPA Pesticide Factsheets

This report describes the recommended modeling approach for watershed modeling component of the Lake Champlain TMDL project. The report was prepared by Tetra Tech, with input from the Lake Champlain watershed analysis workgroup. (TetraTech, 2012a)

Bio-Spectroscopic Imaging Provides Evidence of Hippocampal Zn Deficiency and Decreased Lipid Unsaturation in an Accelerated Ageing Mouse Model.

PubMed

Fimognari, Nicholas; Hollings, Ashley; Lam, Virginie; Tidy, Rebecca J; Kewish, Cameron M; Albrecht, Matthew A; Takechi, Ryu; Mamo, John C L; Hackett, Mark J

2018-06-14

Western society is facing a health epidemic due to the increasing incidence of dementia in ageing populations, and there are still few effective diagnostic methods, minimal treatment options, and no cure. Ageing is the greatest risk factor for memory loss that occurs during the natural ageing process, as well as being the greatest risk factor for neurodegenerative disease such as Alzheimer's disease. Therefore, greater understanding of the biochemical pathways that drive a healthy ageing brain towards dementia (pathological ageing or Alzheimer's disease), is required to accelerate the development of improved diagnostics and therapies. Unfortunately, many animal models of dementia model chronic amyloid precursor protein over-expression, which although highly relevant to mechanisms of amyloidosis and familial Alzheimer's disease, does not model well dementia during the natural ageing process. A promising animal model reported to model mechanisms of accelerated natural ageing and memory impairments, is the senescence accelerated murine prone strain 8 (SAMP8), which has been adopted by many research group to study the biochemical transitions that occur during brain ageing. A limitation to traditional methods of biochemical characterisation is that many important biochemical and elemental markers (lipid saturation, lactate, transition metals) cannot be imaged at meso- or micro-spatial resolution. Therefore, in this investigation we report the first multi-modal biospectroscopic characterisation of the SAMP8 model, and have identified important biochemical and elemental alterations, and co-localisations, between 4 month old SAMP8 mice and the relevant control (SAMR1) mice. Specifically, we demonstrate direct evidence of altered metabolism and disturbed lipid homeostasis within corpus callosum white matter, in addition to localised hippocampal metal deficiencies, in the accelerated ageing phenotype. Such findings have important implication for future research aimed at elucidating specific biochemical pathways for therapeutic intervention.

A bio-psycho-social model of violence related to mental health problems.

PubMed

Steinert, Tilman; Whittington, Richard

2013-01-01

Psychiatry is characterised by bio-psycho-social approaches and therapies. Thus there should be an interest in comprehensive theoretical models for didactic purposes. A narrative synthesis of key themes in the current literature on psychiatric aspects of violence was conducted with the aim of integrating biological, psychological and sociological ideas in this area. Two didactical models are proposed for 1) individual disposition and for 2) acting in specific situations, each including available evidence-based knowledge. The proposed models may be helpful for a comprehensive understanding of all relevant influencing factors in violent mentally ill people and for didactical purposes. Copyright © 2013 Elsevier Ltd. All rights reserved.

Modelling outcomes of complex treatment strategies following a clinical guideline for treatment decisions in patients with rheumatoid arthritis.

PubMed

Tran-Duy, An; Boonen, Annelies; Kievit, Wietske; van Riel, Piet L C M; van de Laar, Mart A F J; Severens, Johan L

2014-10-01

Management of rheumatoid arthritis (RA) is characterised by a sequence of disease-modifying antirheumatic drugs (DMARDs) and biological response modifiers (BRMs). In most of the Western countries, the drug sequences are determined based on disease activity and treatment history of the patients. A model for realistic patient outcomes should reflect the treatment pathways relevant for patients with specific characteristics. This study aimed at developing a model that could simulate long-term patient outcomes and cost effectiveness of treatment strategies with and without inclusion of BRMs following a clinical guideline for treatment decisions. Discrete event simulation taking into account patient characteristics and treatment history was used for model development. Treatment effect on disease activity, costs, health utilities and times to events were estimated using Dutch observational studies. Long-term progression of physical functioning was quantified using a linear mixed-effects model. Costs and health utilities were estimated using two-part models. The treatment strategy recommended by the Dutch Society for Rheumatology where both DMARDs and BRMs were available (Strategy 2) was compared with the treatment strategy without BRMs (Strategy 1). Ten thousand theoretical patients were tracked individually until death. In the probabilistic sensitivity analysis, Monte Carlo simulations were performed with 1,000 sets of parameters sampled from appropriate probability distributions. The simulated changes over time in disease activity and physical functioning were plausible. The incremental cost per quality-adjusted life-year gained of Strategy 2 compared with Strategy 1 was 124,011. At a willingness-to-pay threshold higher than 119,167, Strategy 2 dominated Strategy 1 in terms of cost effectiveness but the probability that the Strategy 2 is cost effective never exceeded 0.87. It is possible to model the outcomes of complex treatment strategies based on a clinical guideline for the management of RA. Following the Dutch guideline and using real-life data, inclusion of BRMs in the treatment strategy for RA appeared to be less favourable in our model than in most of the existing models that compared drug sequences independent of patient characteristics and used data from randomised controlled clinical trials. Despite complexity and demand for extensive data, our modelling approach can help to identify the knowledge gaps in clinical guidelines for RA management and priorities for future research.

Where is Cultural Astronomy Going?

NASA Astrophysics Data System (ADS)

Sims, Lionel

2015-05-01

Archaeoastronomy has recently been characterised as 'going round in circles', failing to integrate a rapidly expanding body of data with the interpretive models of anthropology (Ruggles 2011). This paper locates some impediments to disciplinary growth in the legacy of our recent origins, a problematical conceptual vocabulary and a narrow and derivative theoretical base. Proposals are made for an alternative future for the discipline.

Developing Generic Competences in the European Higher Education Area: A Proposal for Teaching the Principles of Economics

ERIC Educational Resources Information Center

Velasco, Manuel Salas; Sanchez Martinez, Maria Teresa; Ferrero, Noelina Rodriguez

2012-01-01

The participation of Spain in the European Higher Education Area (EHEA) involves a number of important challenges for academics. Adapting to an educational model that is characterised by competence-based teaching is a difficult task, yet it is of paramount importance in the context of current reforms. In an educational system in which the…

Schools as Damaging Organisations: Instigating a Dialogue Concerning Alternative Models of Schooling

ERIC Educational Resources Information Center

Francis, Becky; Mills, Martin

2012-01-01

Various injurious effects of schooling have been documented in the literature over the years, leading some authors to characterise schooling as violence. In this article we draw together such research to present an account of the ways in which schooling in the Global North damages young people (and their teachers). The range of damage includes:…

Isolation and characterisation of sericin antifreeze peptides and molecular dynamics modelling of their ice-binding interaction.

PubMed

Wu, Jinhong; Rong, Yuzhi; Wang, Zhengwu; Zhou, Yanfu; Wang, Shaoyun; Zhao, Bo

2015-05-01

This study aimed to isolate and characterise a novel sericin antifreeze peptide and investigate its ice-binding molecular mechanism. The thermal hysteresis activity of ice-binding sericin peptides (I-SP) was measured and their activity reached as high as 0.94 °C. A P4 fraction, with high hypothermia protective activity and inhibition activity of ice recrystallisation, was obtained from I-SP, and a purified sericin peptide, named SM-AFP, with the sequence of TTSPTNVSTT and a molecular weight of 1009.50 Da was then isolated from the P4 fraction. Treatment of Lactobacillus delbrueckii Subsp. bulgaricus LB340 LYO with 100 μg/ml synthetic SM-AFP led to 1.4-fold increased survival (p < 0.05). Finally, an SM-AFP/ice binding model was constructed and results of molecular dynamics simulation suggested that the binding of SM-AFP with ice and prevention of ice crystal growth could be attributed to hydrogen bond formation, hydrophobic interaction and non-bond interactions. Sericin peptides could be developed into beneficial cryoprotectants and used in frozen food processing. Copyright © 2014 Elsevier Ltd. All rights reserved.

Development of a digital video-microscopy technique to study lactose crystallisation kinetics in situ.

PubMed

Arellano, María Paz; Aguilera, José Miguel; Bouchon, Pedro

2004-11-15

Polarised light microscopy was employed non-invasively to monitor lactose crystallisation from non-seeded supersaturated solutions in real time. Images were continuously recorded, processed and characterised by image analysis, and the results were compared with those obtained by refractometry. Three crystallisation temperatures (10, 20 and 30 degrees C) and three different levels of initial relative supersaturation (C/C(s)=1.95; 2.34; 3.15) were investigated. Induction times using the imaging technique proved to be substantially lower than those determined using refractive index. Lactose crystals were isolated digitally to determine geometrical parameters of interest, such as perimeter, diameter, area, roundness and Feret mean, and to derive crystal growth rates. Mean growth rates obtained for single crystals were fitted to a combined mass transfer model (R(2)=0.9766). The model allowed the effects of temperature and supersaturation on crystallisation rate to be clearly identified. It also suggested that, in this set of experiments, surface integration seemed to be the rate controlling step. It is believed that a similar experimental set-up could be implemented in a real food system to characterise a particular process where crystallisation control is of interest and where traditional techniques are difficult to implement.

Psychological heterogeneity in AD/HD--a dual pathway model of behaviour and cognition.

PubMed

Sonuga-Barke, Edmund J S

2002-03-10

Psychological accounts have characterised attention-deficit/hyperactivity disorder (AD/HD) as either a neuro-cognitive disorder of regulation or a motivational style. Poor inhibitory control is thought to underpin AD/HD children's dysregulation while delay aversion is a dominant characteristic of their motivational style. A recent 'head to head' study of these two accounts suggest that delay aversion and poor inhibitory control are independent co-existing characteristics of AD/HD (combined type). In the present paper we build on these findings to propose a dual pathway model of AD/HD that recognises two quite distinct sub-types of the disorder. In one AD/HD is the result of the dysregulation of action and thought resulting from poor inhibitory control associated with the meso-cortical branch of the dopamine system projecting in the cortical control centres (e.g. pre-frontal cortex). In the other AD/HD is a motivational style characterised by an altered delay of reward gradient linked to the meso-limbic dopamine branch associated with the reward circuits (e.g. nucleus accumbens). The two pathways are further distinguished at the levels of symptoms, cognitive and motivation profiles and genetic and non-genetic origins.

Infusing considerations of trophic dependencies into species distribution modelling.

PubMed

Trainor, Anne M; Schmitz, Oswald J

2014-12-01

Community ecology involves studying the interdependence of species with each other and their environment to predict their geographical distribution and abundance. Modern species distribution analyses characterise species-environment dependency well, but offer only crude approximations of species interdependency. Typically, the dependency between focal species and other species is characterised using other species' point occurrences as spatial covariates to constrain the focal species' predicted range. This implicitly assumes that the strength of interdependency is homogeneous across space, which is not generally supported by analyses of species interactions. This discrepancy has an important bearing on the accuracy of inferences about habitat suitability for species. We introduce a framework that integrates principles from consumer-resource analyses, resource selection theory and species distribution modelling to enhance quantitative prediction of species geographical distributions. We show how to apply the framework using a case study of lynx and snowshoe hare interactions with each other and their environment. The analysis shows how the framework offers a spatially refined understanding of species distribution that is sensitive to nuances in biophysical attributes of the environment that determine the location and strength of species interactions. © 2014 John Wiley & Sons Ltd/CNRS.

Analysis and Modeling of Realistic Compound Channels in Transparent Relay Transmissions

PubMed Central

Kanjirathumkal, Cibile K.; Mohammed, Sameer S.

2014-01-01

Analytical approaches for the characterisation of the compound channels in transparent multihop relay transmissions over independent fading channels are considered in this paper. Compound channels with homogeneous links are considered first. Using Mellin transform technique, exact expressions are derived for the moments of cascaded Weibull distributions. Subsequently, two performance metrics, namely, coefficient of variation and amount of fade, are derived using the computed moments. These metrics quantify the possible variations in the channel gain and signal to noise ratio from their respective average values and can be used to characterise the achievable receiver performance. This approach is suitable for analysing more realistic compound channel models for scattering density variations of the environment, experienced in multihop relay transmissions. The performance metrics for such heterogeneous compound channels having distinct distribution in each hop are computed and compared with those having identical constituent component distributions. The moments and the coefficient of variation computed are then used to develop computationally efficient estimators for the distribution parameters and the optimal hop count. The metrics and estimators proposed are complemented with numerical and simulation results to demonstrate the impact of the accuracy of the approaches. PMID:24701175

Prediction of anaerobic biodegradability and bioaccessibility of municipal sludge by coupling sequential extractions with fluorescence spectroscopy: towards ADM1 variables characterization.

PubMed

Jimenez, Julie; Gonidec, Estelle; Cacho Rivero, Jesús Andrés; Latrille, Eric; Vedrenne, Fabien; Steyer, Jean-Philippe

2014-03-01

Advanced dynamic anaerobic digestion models, such as ADM1, require both detailed organic matter characterisation and intimate knowledge of the involved metabolic pathways. In the current study, a methodology for municipal sludge characterization is investigated to describe two key parameters: biodegradability and bioaccessibility of organic matter. The methodology is based on coupling sequential chemical extractions with 3D fluorescence spectroscopy. The use of increasingly strong solvents reveals different levels of organic matter accessibility and the spectroscopy measurement leads to a detailed characterisation of the organic matter. The results obtained from testing 52 municipal sludge samples (primary, secondary, digested and thermally treated) showed a successful correlation with sludge biodegradability and bioaccessibility. The two parameters, traditionally obtained through the biochemical methane potential (BMP) lab tests, are now obtain in only 5 days compared to the 30-60 days usually required. Experimental data, obtained from two different laboratory scale reactors, were used to validate the ADM1 model. The proposed approach showed a strong application potential for reactor design and advanced control of anaerobic digestion processes. Copyright © 2013 Elsevier Ltd. All rights reserved.

Modelling charge interactions in the prion protein: predictions for pathogenesis.

PubMed

Warwicker, J

1999-04-30

Calculations are presented for the pH-dependence of stability and membrane charge complementarity of prion protein fragments. The theoretical results are compared with reported characterisations of prion protein folding in vitro. Discussion of models for conformational change and pathogenesis in vivo leads to the prediction of amino acids that could mediate sensitivity to the endosomal pH and to a design strategy for recombinant prion proteins with an increased susceptibility to prion proteinSc-like properties in vitro. In this model, the protective effect of certain basic polymorphisms can be interpreted in terms of oligomerisation on a negatively-charged surface.

Examination of various turbulence models for application in liquid rocket thrust chambers

NASA Technical Reports Server (NTRS)

Hung, R. J.

1991-01-01

There is a large variety of turbulence models available. These models include direct numerical simulation, large eddy simulation, Reynolds stress/flux model, zero equation model, one equation model, two equation k-epsilon model, multiple-scale model, etc. Each turbulence model contains different physical assumptions and requirements. The natures of turbulence are randomness, irregularity, diffusivity and dissipation. The capabilities of the turbulence models, including physical strength, weakness, limitations, as well as numerical and computational considerations, are reviewed. Recommendations are made for the potential application of a turbulence model in thrust chamber and performance prediction programs. The full Reynolds stress model is recommended. In a workshop, specifically called for the assessment of turbulence models for applications in liquid rocket thrust chambers, most of the experts present were also in favor of the recommendation of the Reynolds stress model.

Automated characterisation of ultrasound images of ovarian tumours: the diagnostic accuracy of a support vector machine and image processing with a local binary pattern operator.

PubMed

Khazendar, S; Sayasneh, A; Al-Assam, H; Du, H; Kaijser, J; Ferrara, L; Timmerman, D; Jassim, S; Bourne, T

2015-01-01

Preoperative characterisation of ovarian masses into benign or malignant is of paramount importance to optimise patient management. In this study, we developed and validated a computerised model to characterise ovarian masses as benign or malignant. Transvaginal 2D B mode static ultrasound images of 187 ovarian masses with known histological diagnosis were included. Images were first pre-processed and enhanced, and Local Binary Pattern Histograms were then extracted from 2 × 2 blocks of each image. A Support Vector Machine (SVM) was trained using stratified cross validation with randomised sampling. The process was repeated 15 times and in each round 100 images were randomly selected. The SVM classified the original non-treated static images as benign or malignant masses with an average accuracy of 0.62 (95% CI: 0.59-0.65). This performance significantly improved to an average accuracy of 0.77 (95% CI: 0.75-0.79) when images were pre-processed, enhanced and treated with a Local Binary Pattern operator (mean difference 0.15: 95% 0.11-0.19, p < 0.0001, two-tailed t test). We have shown that an SVM can classify static 2D B mode ultrasound images of ovarian masses into benign and malignant categories. The accuracy improves if texture related LBP features extracted from the images are considered.

Exploiting Continuous Scanning Laser Doppler Vibrometry in timing belt dynamic characterisation

NASA Astrophysics Data System (ADS)

Chiariotti, P.; Martarelli, M.; Castellini, P.

2017-03-01

Dynamic behaviour of timing belts has always interested the engineering community over the years. Nowadays, there are several numerical methods to predict the dynamics of these systems. However, the tuning of such models by experimental approaches still represents an issue: an accurate characterisation does require a measurement in operating conditions since the belt mounting condition might severely affect its dynamic behaviour. Moreover, since the belt is constantly moving during running conditions, non-contact measurement methods are needed. Laser Doppler Vibrometry (LDV) and imaging techniques do represent valid candidates for this purpose. This paper aims at describing the use of Continuous Scanning LDV (CSLDV) as a tool for the dynamic characterisation of timing belts in IC (Internal Combustion) engines (cylinder head). The high-spatial resolution data that can be collected in short testing time makes CSLDV highly suitable for such application. The measurement on a moving surface, however, represents a challenge for CSLDV. The paper discusses how the belt in-plane speed influences CSLDV signal and how an order-based multi-harmonic excitation might affect the recovery of Operational Deflection Shapes in a CSLDV test. A comparison with a standard Discrete Scanning LDV measurement is also given in order to show that a CSLDV test, if well designed, can indeed provide the same amount of information in a drastically reduced amount of time.

An application for impedance spectroscopy in the characterisation of the glass transition during the lyophilization cycle: the example of a 10% w/v maltodextrin solution.

PubMed

Smith, Geoff; Arshad, Muhammad Sohail; Polygalov, Eugene; Ermolina, Irina

2013-11-01

Impedance spectroscopy has been used for the measurement of the glass transition of a 10 % maltodextrin solution contained within a glass vial, with externally attached electrodes. Features of the pseudo-relaxation process, associated with the composite impedance of the glass vial-solution assembly, were characterised by the peak amplitude, C(peak)(″), and peak frequency, f(peak), of the capacitance spectra and the equivalent circuit elements that model the impedance spectra (i.e. the solution resistance and solution capacitance) and monitored every 3 min during re-heating of the solution. The time derivatives of all four parameters studied provided a glass transition in close agreement with DSC measurements (-17 °C) and at a precision of ± 0.5 °C. The temperature dependencies of the solution resistance and peak frequency were then characterised with the Arrhenius and Vogel-Fulcher-Tammann fit functions, at temperatures below and above Tg, respectively. The energy of activation (below Tg) was estimated at ~20 kJ mol(-1), and the fragility index (If) of the glass forming liquid (above Tg) was estimated at 0.9. The significance of the fragility index to the development, optimisation and control of the freeze-drying cycle is highlighted. Copyright © 2013 Elsevier B.V. All rights reserved.

Cloning and characterization of the canine receptor for advanced glycation end products.

PubMed

Murua Escobar, Hugo; Soller, Jan T; Sterenczak, Katharina A; Sperveslage, Jan D; Schlueter, Claudia; Burchardt, Birgit; Eberle, Nina; Fork, Melanie; Nimzyk, Rolf; Winkler, Susanne; Nolte, Ingo; Bullerdiek, Jörn

2006-03-15

Metastasis is one of the major problems when dealing with malignant neoplasias. Accordingly, the finding of molecular targets, which can be addressed to reduce tumour metastasising, will have significant impact on the development of new therapeutic approaches. Recently, the receptor for advanced glycation end products (RAGE)-high mobility group B1 (HMGB1) protein complex has been shown to have significant influence on invasiveness, growth and motility of tumour cells, which are essential characteristics required for metastatic behaviour. A set of in vitro and in vivo approaches showed that blocking of this complex resulted in drastic suppression of tumour cell growth. Due to the similarities of human and canine cancer the dog has joined the common rodent animal model for therapeutic and preclinical studies. However, complete characterisation of the protein complex is a precondition to a therapeutic approach based on the blocking of the RAGE-HMGB1 complex to spontaneously occurring tumours in dogs. We recently characterised the canine HMGB1 gene and protein completely. Here we present the complete characterisation of the canine RAGE gene including its 1384 bp mRNA, the 1215 bp protein coding sequence, the 2835 bp genomic structure, chromosomal localisation, gene expression pattern, and its 404 amino acid protein. Furthermore we compared the CDS of six different canine breeds and screened them for single nucleotide polymorphisms.

Conceptualisations of infinity by primary pre-service teachers

NASA Astrophysics Data System (ADS)

Date-Huxtable, Elizabeth; Cavanagh, Michael; Coady, Carmel; Easey, Michael

2018-05-01

As part of the Opening Real Science: Authentic Mathematics and Science Education for Australia project, an online mathematics learning module embedding conceptual thinking about infinity in science-based contexts, was designed and trialled with a cohort of 22 pre-service teachers during 1 week of intensive study. This research addressed the question: "How do pre-service teachers conceptualise infinity mathematically?" Participants argued the existence of infinity in a summative reflective task, using mathematical and empirical arguments that were coded according to five themes: definition, examples, application, philosophy and teaching; and 17 codes. Participants' reflections were differentiated as to whether infinity was referred to as an abstract (A) or a real (R) concept or whether both (B) codes were used. Principal component analysis of the reflections, using frequency of codings, revealed that A and R codes occurred at different frequencies in three groups of reflections. Distinct methods of argument were associated with each group of reflections: mathematical numerical examples and empirical measurement comparisons characterised arguments for infinity as an abstract concept, geometric and empirical dynamic examples and belief statements characterised arguments for infinity as a real concept and empirical measurement and mathematical examples and belief statements characterised arguments for infinity as both an abstract and a real concept. An implication of the results is that connections between mathematical and empirical applications of infinity may assist pre-service teachers to contrast finite with infinite models of the world.

Multi-pelvis characterisation of articular cartilage geometry.

PubMed

Gillard, Faye C; Dickinson, Alexander S; Schneider, Urs; Taylor, Andrew C; Browne, Martin

2013-12-01

The shape of the acetabular cartilage follows the contact stress distribution across the joint. Accurate characterisation of this geometry may be useful for the development of acetabular cup devices that are more biomechanically compliant. In this study, the geometry of the acetabular cartilage was characterised by taking plaster moulds of the acetabulum from 24 dry bone human pelvises and digitising the mould shapes using a three-dimensional laser scanner. The articular bone surface geometry was analysed, and the shape of the acetabulum was approximated by fitting a best-fit sphere. To test the hypothesis that the acetabulum is non-spherical, a best-fit ellipsoid was also fitted to the geometry. In each case, points around the acetabular notch edge that disclosed the articular surface geometry were identified, and vectors were drawn between these and the best-fit sphere or ellipsoid centre. The significantly larger z radii (into the pole) of the ellipsoids indicated that the acetabulum was non-spherical and could imply that the kinematics of the hip joint is more complex than purely rotational motion, and the traditional ball-and-socket replacement may need to be updated to reflect this motion. The acetabular notch edges were observed to be curved, with males exhibiting deeper, wider and shorter notches than females, although the difference was not statistically significant (mean: p = 0.30) and supports the use of non-gender-specific models in anatomical studies.

A systematic review of the quality of statistical methods employed for analysing quality of life data in cancer randomised controlled trials.

PubMed

Hamel, Jean-Francois; Saulnier, Patrick; Pe, Madeline; Zikos, Efstathios; Musoro, Jammbe; Coens, Corneel; Bottomley, Andrew

2017-09-01

Over the last decades, Health-related Quality of Life (HRQoL) end-points have become an important outcome of the randomised controlled trials (RCTs). HRQoL methodology in RCTs has improved following international consensus recommendations. However, no international recommendations exist concerning the statistical analysis of such data. The aim of our study was to identify and characterise the quality of the statistical methods commonly used for analysing HRQoL data in cancer RCTs. Building on our recently published systematic review, we analysed a total of 33 published RCTs studying the HRQoL methods reported in RCTs since 1991. We focussed on the ability of the methods to deal with the three major problems commonly encountered when analysing HRQoL data: their multidimensional and longitudinal structure and the commonly high rate of missing data. All studies reported HRQoL being assessed repeatedly over time for a period ranging from 2 to 36 months. Missing data were common, with compliance rates ranging from 45% to 90%. From the 33 studies considered, 12 different statistical methods were identified. Twenty-nine studies analysed each of the questionnaire sub-dimensions without type I error adjustment. Thirteen studies repeated the HRQoL analysis at each assessment time again without type I error adjustment. Only 8 studies used methods suitable for repeated measurements. Our findings show a lack of consistency in statistical methods for analysing HRQoL data. Problems related to multiple comparisons were rarely considered leading to a high risk of false positive results. It is therefore critical that international recommendations for improving such statistical practices are developed. Copyright © 2017. Published by Elsevier Ltd.

Modeling mutual feedback between users and recommender systems

NASA Astrophysics Data System (ADS)

Zeng, An; Yeung, Chi Ho; Medo, Matúš; Zhang, Yi-Cheng

2015-07-01

Recommender systems daily influence our decisions on the Internet. While considerable attention has been given to issues such as recommendation accuracy and user privacy, the long-term mutual feedback between a recommender system and the decisions of its users has been neglected so far. We propose here a model of network evolution which allows us to study the complex dynamics induced by this feedback, including the hysteresis effect which is typical for systems with non-linear dynamics. Despite the popular belief that recommendation helps users to discover new things, we find that the long-term use of recommendation can contribute to the rise of extremely popular items and thus ultimately narrow the user choice. These results are supported by measurements of the time evolution of item popularity inequality in real systems. We show that this adverse effect of recommendation can be tamed by sacrificing part of short-term recommendation accuracy.

The influence of habitat structure on energy allocation tactics in an estuarine batch spawner

NASA Astrophysics Data System (ADS)

Brigolin, D.; Cavraro, F.; Zanatta, V.; Pastres, R.; Malavasi, S.

2016-04-01

Trade-off between fecundity and survival was tested in a batch spawner, the Mediterranean killifish Aphanius fasciatus, using an integrated modelling-data approach based on previously collected empirical data. Two sites of the lagoon of Venice (Northern Adriatic sea, Italy) were selected in order to compare the energy allocation between growth and reproduction in two contrasting habitats. These were characterised by high and comparable level of richness in basal resources, but showed two different mortality schedules: an open natural salt marsh, exposed to high level of predation, and a confined artificial site protected from piscivorous predation. By means of a bioenergetic Scope for Growth model, developed and calibrated for the specific goals of this work, we compared the average individual life history between the two habitats. The average individual life history is characterised by a higher number of spawning events and lower per-spawning investment in the confined site exposed to lower predation risk, compared to the site connected with the open lagoon. Thus, model predictions suggest that habitat structure with different extrinsic mortality schedules may shape the life history strategy in modulating the pattern of energy allocation. Model application highlights the central role of energy partitioning through batch spawning, in determining the life history strategy. The particular ovary structure of a batch spawner seems therefore to allow the fish to modulate timing and investment of spawning events, shaping the optimal life history in relation to the environmental conditions.

Evaluating, interpreting, and communicating performance of hydrologic/water quality models considering intended use: A review and recommendations

USDA-ARS?s Scientific Manuscript database

Previous publications have outlined recommended practices for hydrologic and water quality (H/WQ) modeling, but none have formulated comprehensive guidelines for the final stage of modeling applications, namely evaluation, interpretation, and communication of model results and the consideration of t...

Visual texture for automated characterisation of geological features in borehole televiewer imagery

NASA Astrophysics Data System (ADS)

Al-Sit, Waleed; Al-Nuaimy, Waleed; Marelli, Matteo; Al-Ataby, Ali

2015-08-01

Detailed characterisation of the structure of subsurface fractures is greatly facilitated by digital borehole logging instruments, the interpretation of which is typically time-consuming and labour-intensive. Despite recent advances towards autonomy and automation, the final interpretation remains heavily dependent on the skill, experience, alertness and consistency of a human operator. Existing computational tools fail to detect layers between rocks that do not exhibit distinct fracture boundaries, and often struggle characterising cross-cutting layers and partial fractures. This paper presents a novel approach to the characterisation of planar rock discontinuities from digital images of borehole logs. Multi-resolution texture segmentation and pattern recognition techniques utilising Gabor filters are combined with an iterative adaptation of the Hough transform to enable non-distinct, partial, distorted and steep fractures and layers to be accurately identified and characterised in a fully automated fashion. This approach has successfully detected fractures and layers with high detection accuracy and at a relatively low computational cost.

Clinical challenges in the molecular characterization of circulating tumour cells in breast cancer.

PubMed

Lianidou, E S; Mavroudis, D; Georgoulias, V

2013-06-25

Blood testing for circulating tumour cells (CTC) has emerged as one of the hottest fields in cancer research. CTC detection and enumeration can serve as a 'liquid biopsy' and an early marker of response to systemic therapy, whereas their molecular characterisation has a strong potential to be translated to individualised targeted treatments and spare breast cancer (BC) patients unnecessary and ineffective therapies. Different analytical systems for CTC detection and isolation have been developed and new areas of research are directed towards developing novel assays for CTC molecular characterisation. Molecular characterisation of single CTC holds considerable promise for predictive biomarker assessment and to explore CTC heterogeneity. The application of extremely powerful next-generation sequencing technologies in the area of CTC molecular characterisation in combination with reliable single CTC isolation opens new frontiers for the management of patients in the near future. This review is mainly focused on the clinical potential of the molecular characterisation of CTC in BC.

Clinical challenges in the molecular characterization of circulating tumour cells in breast cancer

PubMed Central

Lianidou, E S; Mavroudis, D; Georgoulias, V

2013-01-01

Blood testing for circulating tumour cells (CTC) has emerged as one of the hottest fields in cancer research. CTC detection and enumeration can serve as a ‘liquid biopsy' and an early marker of response to systemic therapy, whereas their molecular characterisation has a strong potential to be translated to individualised targeted treatments and spare breast cancer (BC) patients unnecessary and ineffective therapies. Different analytical systems for CTC detection and isolation have been developed and new areas of research are directed towards developing novel assays for CTC molecular characterisation. Molecular characterisation of single CTC holds considerable promise for predictive biomarker assessment and to explore CTC heterogeneity. The application of extremely powerful next-generation sequencing technologies in the area of CTC molecular characterisation in combination with reliable single CTC isolation opens new frontiers for the management of patients in the near future. This review is mainly focused on the clinical potential of the molecular characterisation of CTC in BC. PMID:23756869

Review: The state-of-art of sparse channel models and their applicability to performance assessment of radioactive waste repositories in fractured crystalline formations

NASA Astrophysics Data System (ADS)

Figueiredo, Bruno; Tsang, Chin-Fu; Niemi, Auli; Lindgren, Georg

2016-11-01

Laboratory and field experiments done on fractured rock show that flow and solute transport often occur along flow channels. `Sparse channels' refers to the case where these channels are characterised by flow in long flow paths separated from each other by large spacings relative to the size of flow domain. A literature study is presented that brings together information useful to assess whether a sparse-channel network concept is an appropriate representation of the flow system in tight fractured rock of low transmissivity, such as that around a nuclear waste repository in deep crystalline rocks. A number of observations are made in this review. First, conventional fracture network models may lead to inaccurate results for flow and solute transport in tight fractured rocks. Secondly, a flow dimension of 1, as determined by the analysis of pressure data in well testing, may be indicative of channelised flow, but such interpretation is not unique or definitive. Thirdly, in sparse channels, the percolation may be more influenced by the fracture shape than the fracture size and orientation but further studies are needed. Fourthly, the migration of radionuclides from a waste canister in a repository to the biosphere may be strongly influenced by the type of model used (e.g. discrete fracture network, channel model). Fifthly, the determination of appropriateness of representing an in situ flow system by a sparse-channel network model needs parameters usually neglected in site characterisation, such as the density of channels or fracture intersections.

Measurement and modelling of reactive transport in geological barriers for nuclear waste containment

DOE PAGES

Xiong, Qingrong; Joseph, Claudia; Schmeide, Katja; ...

2015-10-26

Compacted clays are considered as excellent candidates for barriers to radionuclide transport in future repositories for nuclear waste due to their very low hydraulic permeability. Diffusion is the dominant transport mechanism, controlled by a nano-scale pore system. Assessment of the clays' long-term containment function requires adequate modelling of such pore systems and their evolution. Existing characterisation techniques do not provide complete pore space information for effective modelling, such as pore and throat size distributions and connectivity. Special network models for reactive transport are proposed here using the complimentary character of the pore space and the solid phase. Here, this balancesmore » the insufficient characterisation information and provides the means for future mechanical–physical–chemical coupling. The anisotropy and heterogeneity of clays is represented using different length parameters and percentage of pores in different directions. Resulting networks are described as mathematical graphs with efficient discrete calculus formulation of transport. Opalinus Clay (OPA) is chosen as an example. Experimental data for the tritiated water (HTO) and U(VI) diffusion through OPA are presented. Calculated diffusion coefficients of HTO and uranium species are within the ranges of the experimentally determined data in different clay directions. This verifies the proposed pore network model and validates that uranium complexes are diffusing as neutral species in OPA. In the case of U(VI) diffusion the method is extended to account for sorption and convection. Finally, rather than changing pore radii by coarse grained mathematical formula, physical sorption is simulated in each pore, which is more accurate and realistic.« less

Characterisation of PDO olive oil Chianti Classico by non-selective (UV-visible, NIR and MIR spectroscopy) and selective (fatty acid composition) analytical techniques.

PubMed

Casale, M; Oliveri, P; Casolino, C; Sinelli, N; Zunin, P; Armanino, C; Forina, M; Lanteri, S

2012-01-27

An authentication study of the Italian PDO (protected designation of origin) extra virgin olive oil Chianti Classico was performed; UV-visible (UV-vis), Near-Infrared (NIR) and Mid-Infrared (MIR) spectroscopies were applied to a set of samples representative of the whole Chianti Classico production area. The non-selective signals (fingerprints) provided by the three spectroscopic techniques were utilised both individually and jointly, after fusion of the respective profile vectors, in order to build a model for the Chianti Classico PDO olive oil. Moreover, these results were compared with those obtained by the gas chromatographic determination of the fatty acids composition. In order to characterise the olive oils produced in the Chianti Classico PDO area, UNEQ (unequal class models) and SIMCA (soft independent modelling of class analogy) were employed both on the MIR, NIR and UV-vis spectra, individually and jointly, and on the fatty acid composition. Finally, PLS (partial least square) regression was applied on the UV-vis, NIR and MIR spectra, in order to predict the content of oleic and linoleic acids in the extra virgin olive oils. UNEQ, SIMCA and PLS were performed after selection of the relevant predictors, in order to increase the efficiency of both classification and regression models. The non-selective information obtained from UV-vis, NIR and MIR spectroscopy allowed to build reliable models for checking the authenticity of the Italian PDO extra virgin olive oil Chianti Classico. Copyright © 2011 Elsevier B.V. All rights reserved.

Measurement and modelling of reactive transport in geological barriers for nuclear waste containment.

PubMed

Xiong, Qingrong; Joseph, Claudia; Schmeide, Katja; Jivkov, Andrey P

2015-11-11

Compacted clays are considered as excellent candidates for barriers to radionuclide transport in future repositories for nuclear waste due to their very low hydraulic permeability. Diffusion is the dominant transport mechanism, controlled by a nano-scale pore system. Assessment of the clays' long-term containment function requires adequate modelling of such pore systems and their evolution. Existing characterisation techniques do not provide complete pore space information for effective modelling, such as pore and throat size distributions and connectivity. Special network models for reactive transport are proposed here using the complimentary character of the pore space and the solid phase. This balances the insufficient characterisation information and provides the means for future mechanical-physical-chemical coupling. The anisotropy and heterogeneity of clays is represented using different length parameters and percentage of pores in different directions. Resulting networks are described as mathematical graphs with efficient discrete calculus formulation of transport. Opalinus Clay (OPA) is chosen as an example. Experimental data for the tritiated water (HTO) and U(vi) diffusion through OPA are presented. Calculated diffusion coefficients of HTO and uranium species are within the ranges of the experimentally determined data in different clay directions. This verifies the proposed pore network model and validates that uranium complexes are diffusing as neutral species in OPA. In the case of U(vi) diffusion the method is extended to account for sorption and convection. Rather than changing pore radii by coarse grained mathematical formula, physical sorption is simulated in each pore, which is more accurate and realistic.

How Participatory Should Environmental Governance Be? Testing the Applicability of the Vroom-Yetton-Jago Model in Public Environmental Decision-Making

NASA Astrophysics Data System (ADS)

Lührs, Nikolas; Jager, Nicolas W.; Challies, Edward; Newig, Jens

2018-02-01

Public participation is potentially useful to improve public environmental decision-making and management processes. In corporate management, the Vroom-Yetton-Jago normative decision-making model has served as a tool to help managers choose appropriate degrees of subordinate participation for effective decision-making given varying decision-making contexts. But does the model recommend participatory mechanisms that would actually benefit environmental management? This study empirically tests the improved Vroom-Jago version of the model in the public environmental decision-making context. To this end, the key variables of the Vroom-Jago model are operationalized and adapted to a public environmental governance context. The model is tested using data from a meta-analysis of 241 published cases of public environmental decision-making, yielding three main sets of findings: (1) The Vroom-Jago model proves limited in its applicability to public environmental governance due to limited variance in its recommendations. We show that adjustments to key model equations make it more likely to produce meaningful recommendations. (2) We find that in most of the studied cases, public environmental managers (implicitly) employ levels of participation close to those that would have been recommended by the model. (3) An ANOVA revealed that such cases, which conform to model recommendations, generally perform better on stakeholder acceptance and environmental standards of outputs than those that diverge from the model. Public environmental management thus benefits from carefully selected and context-sensitive modes of participation.

How Participatory Should Environmental Governance Be? Testing the Applicability of the Vroom-Yetton-Jago Model in Public Environmental Decision-Making.

PubMed

Lührs, Nikolas; Jager, Nicolas W; Challies, Edward; Newig, Jens

2018-02-01

Public participation is potentially useful to improve public environmental decision-making and management processes. In corporate management, the Vroom-Yetton-Jago normative decision-making model has served as a tool to help managers choose appropriate degrees of subordinate participation for effective decision-making given varying decision-making contexts. But does the model recommend participatory mechanisms that would actually benefit environmental management? This study empirically tests the improved Vroom-Jago version of the model in the public environmental decision-making context. To this end, the key variables of the Vroom-Jago model are operationalized and adapted to a public environmental governance context. The model is tested using data from a meta-analysis of 241 published cases of public environmental decision-making, yielding three main sets of findings: (1) The Vroom-Jago model proves limited in its applicability to public environmental governance due to limited variance in its recommendations. We show that adjustments to key model equations make it more likely to produce meaningful recommendations. (2) We find that in most of the studied cases, public environmental managers (implicitly) employ levels of participation close to those that would have been recommended by the model. (3) An ANOVA revealed that such cases, which conform to model recommendations, generally perform better on stakeholder acceptance and environmental standards of outputs than those that diverge from the model. Public environmental management thus benefits from carefully selected and context-sensitive modes of participation.

Physiological responses to rock climbing in young climbers

PubMed Central

Morrison, Audry Birute; Schöffl, Volker Rainer

2007-01-01

Key questions regarding the training and physiological qualities required to produce an elite rock climber remain inadequately defined. Little research has been done on young climbers. The aim of this paper was to review literature on climbing alongside relevant literature characterising physiological adaptations in young athletes. Evidence‐based recommendations were sought to inform the training of young climbers. Of 200 studies on climbing, 50 were selected as being appropriate to this review, and were interpreted alongside physiological studies highlighting specific common development growth variables in young climbers. Based on injury data, climbers younger than 16 years should not participate in international bouldering competitions and intensive finger strength training is not recommended. The majority of climbing foot injuries result from wearing too small or unnaturally shaped climbing shoes. Isometric and explosive strength improvements are strongly associated with the latter stages of sexual maturation and specific ontogenetic development, while improvement in motor abilities declines. Somatotyping that might identify common physical attributes in elite climbers of any age is incomplete. Accomplished adolescent climbers can now climb identical grades and compete against elite adult climbers aged up to and >40 years. High‐intensity sports training requiring leanness in a youngster can result in altered and delayed pubertal and skeletal development, metabolic and neuroendocrine aberrations and trigger eating disorders. This should be sensitively and regularly monitored. Training should reflect efficacious exercises for a given sex and biological age. PMID:18037632

The second World Cancer Research Fund/American Institute for Cancer Research expert report. Food, nutrition, physical activity, and the prevention of cancer: a global perspective.

PubMed

Wiseman, Martin

2008-08-01

It has been estimated by various authorities that about one-third of cancers in Western high-income societies are attributable to factors relating to food, nutrition and physical activity. Identifying with confidence specific associations between dietary patterns, foods, body composition or individual nutrients is not simple because of the long latent period for cancer development, its complex pathogenesis and the challenge of characterising the multidimensional aspects of diet and activity over a lifetime. Reliable conclusions must therefore be drawn not only from randomised controlled trials but from a variety of methodological approaches, judged within a classic framework for inferring causality. Using a newly-developed method with a protocol for standardising the literature search and for analysis and display of the evidence, nine independent academic centres have conducted systematic reviews addressing the causal associations between food, nutrition and physical activity and risk of development of seventeen cancers, as well as of weight gain and obesity. A review has also examined the efficacy of such interventions in subjects with cancer. The reviews have been assessed by an independent Panel of twenty-one international experts who drew conclusions with grades of confidence in the causality of associations and made recommendations. Recommendations are given as public health goals as well as for individuals.

Combining IRIS/Hinode Observations and Modeling: a Pathfinder for Coronal Heating

NASA Astrophysics Data System (ADS)

Antolin, P.; Okamoto, J.; De Pontieu, B.

2015-12-01

The combination of imaging and spectroscopic instruments with multiple temperature diagnostics at high spatial, temporal and spectral resolution can allow to recover the 3D plasma flow and thermodynamic evolution associated with specific coronal heating mechanisms. Although very hard considering the complexity of the solar atmosphere, this approach is becoming possible now through combination of instruments such as IRIS and Hinode, and with proper guiding from advanced numerical simulations and forward modeling. In this talk I will review recent examples of this approach, focusing on a particular, recently published, case study, that serves as a pathfinder in the search for the dominant coronal heating mechanism. In this case, resonant absorption, a long hypothesised wave-related energy conversion mechanism is spotted in action for the first time, and is characterised by a peculiar 3D motion of the plasma. With the help of 3D MHD numerical simulations and forward modeling the observational signatures of resonant absorption are characterised, matching very well the observational results. The process through which this mechanism can lead to observed significant heating in the solar corona is further identified: the resonant flow becomes turbulent following dynamic instabilities and heats the plasma. I will show how this resonance + instability process is expected in different scenarios of the solar atmosphere (the corona, prominences and spicules) and can potentially explain several observed features that remain so far unexplained.

A general methodology for inverse estimation of the elastic and anelastic properties of anisotropic open-cell porous materials—with application to a melamine foam

DOE Office of Scientific and Technical Information (OSTI.GOV)

Cuenca, Jacques, E-mail: jcuenca@kth.se; Van der Kelen, Christophe; Göransson, Peter

2014-02-28

This paper proposes an inverse estimation method for the characterisation of the elastic and anelastic properties of the frame of anisotropic open-cell foams used for sound absorption. A model of viscoelasticity based on a fractional differential constitutive equation is used, leading to an augmented Hooke's law in the frequency domain, where the elastic and anelastic phenomena appear as distinctive terms in the stiffness matrix. The parameters of the model are nine orthotropic elastic moduli, three angles of orientation of the material principal directions and three parameters governing the anelastic frequency dependence. The inverse estimation consists in numerically fitting the modelmore » on a set of transfer functions extracted from a sample of material. The setup uses a seismic-mass measurement repeated in the three directions of space and is placed in a vacuum chamber in order to remove the air from the pores of the sample. The method allows to reconstruct the full frequency-dependent complex stiffness matrix of the frame of an anisotropic open-cell foam and in particular it provides the frequency of maximum energy dissipation by viscoelastic effects. The characterisation of a melamine foam sample is performed and the relation between the fractional-derivative model and other types of parameterisations of the augmented Hooke's law is discussed.« less

Modelling NDE pulse-echo inspection of misorientated planar rough defects using an elastic finite element method

DOE Office of Scientific and Technical Information (OSTI.GOV)

Pettit, J. R.; Lowe, M. J. S.; Walker, A. E.

2015-03-31

Pulse-echo ultrasonic NDE examination of large pressure vessel forgings is a design and construction code requirement in the power generation industry. Such inspections aim to size and characterise potential defects that may have formed during the forging process. Typically these defects have a range of orientations and surface roughnesses which can greatly affect ultrasonic wave scattering behaviour. Ultrasonic modelling techniques can provide insight into defect response and therefore aid in characterisation. However, analytical approaches to solving these scattering problems can become inaccurate, especially when applied to increasingly complex defect geometries. To overcome these limitations a elastic Finite Element (FE) methodmore » has been developed to simulate pulse-echo inspections of embedded planar defects. The FE model comprises a significantly reduced spatial domain allowing for a Monte-Carlo based approach to consider multiple realisations of defect orientation and surface roughness. The results confirm that defects aligned perpendicular to the path of beam propagation attenuate ultrasonic signals according to the level of surface roughness. However, for defects orientated away from this plane, surface roughness can increase the magnitude of the scattered component propagating back along the path of the incident beam. This study therefore highlights instances where defect roughness increases the magnitude of ultrasonic scattered signals, as opposed to attenuation which is more often assumed.« less

Genetic algorithm and graph theory based matrix factorization method for online friend recommendation.

PubMed

Li, Qu; Yao, Min; Yang, Jianhua; Xu, Ning

2014-01-01

Online friend recommendation is a fast developing topic in web mining. In this paper, we used SVD matrix factorization to model user and item feature vector and used stochastic gradient descent to amend parameter and improve accuracy. To tackle cold start problem and data sparsity, we used KNN model to influence user feature vector. At the same time, we used graph theory to partition communities with fairly low time and space complexity. What is more, matrix factorization can combine online and offline recommendation. Experiments showed that the hybrid recommendation algorithm is able to recommend online friends with good accuracy.

The Relationship Between Guideline-Recommended Initiation of Therapy, Outcomes, and Cost for Patients with Metastatic Non-Small Cell Lung Cancer.

PubMed

Casebeer, Adrianne; Antol, Dana Drzayich; DeClue, Richard W; Hopson, Sari; Li, Yong; Khoury, Raya; Michael, Todd; Sehman, Marina; Parikh, Aparna; Stemkowski, Stephen; Bunce, Mikele

2018-06-01

Guideline-recommended therapy for metastatic non-small cell lung cancer (mNSCLC) encourages evidence-based treatment; however, there is a knowledge gap regarding the influence of guideline-recommended initiation of therapy on outcomes and cost. To investigate if lack of guideline-recommended initiation of first-line systemic therapy was associated with worse patient outcomes and increased costs for patients with mNSCLC. In this retrospective analysis, 1,344 Medicare patients with mNSCLC were identified from Humana data. Performance status (PS) was imputed using procedure, diagnosis, and durable medical equipment codes pre-index. Guideline-recommended initiation of therapy was defined as ≥1 cycle of National Comprehensive Cancer Network-recommended first-line therapy based on age and PS or targeted therapies regardless of age and PS. Demographics and clinical characteristics were compared by guideline-recommended initiation of therapy. A Cox model assessed factors associated with 6-month mortality. End-of-life quality of care indicators included hospital admission and oncology infusions 30 days preceding death and were evaluated using logistic regression models. A generalized linear model assessed the relationship between guideline-recommended initiation of therapy and total health care costs in the 6 months post-index controlling for clinical, demographic, and treatment characteristics. Logistic models for inpatient stays and emergency department visits were also evaluated. Guideline-recommended therapy initiation was observed in 75.5% of patients. Patients not initiating guideline-recommended therapy were older, with a mean (SD) age of 72.5 (6.7) versus 71.2 (6.2) years (P = 0.001), and more frequently identified as having a low-income subsidy (30.0% vs. 16.4%; P < 0.001). Among the 24.6% of patients who died ≤ 6 months post-index, a greater percentage had not initiated guideline-recommended therapy (28.8% vs. 23.2%; P = 0.040). In adjusted models, PS (not initiation of guideline-recommended therapy) was predictive of mortality (patients with poor PS had an 84% higher probability of death [P = 0.014]). Among decedents, 64.2% were hospitalized, and 33.9% had an oncology-related infusion within 30 days of death, with no differences by guideline-recommended initiation of therapy. These end-of-life quality indicators were not associated with guideline-recommended initiation of therapy in adjusted models. Overall, 47.5% of patients who initiated guideline-recommended therapy were hospitalized compared with 55.0% of patients who did not (P = 0.026). Patients initiating guideline-recommended therapy had higher post-index total and oncology-related health care costs and fewer hospitalizations. In models, these differences in costs and hospitalizations were not associated with initiation of guideline-recommended therapy. Most patients initiated guideline-recommended therapy, with no differences in mortality and quality of care at the end of life by guideline-recommended initiation of therapy, though adherence beyond treatment initiation was not assessed. Unadjusted hospitalization rates were lower and costs were higher for patients who initiated guideline-recommended therapy. These differences were no longer observed after risk adjustment, suggesting that they may have been influenced by patient characteristics, disease progression, and subsequent treatment decisions. This study was sponsored by Genentech. Khoury, Michael, Parikh, and Bunce are employed by Genentech. Casebeer, Drzayich Antol, DeClue, Hopson, Li, and Stemkowski are employed by Comprehensive Health Insights, Humana, which was contracted by Genentech to conduct this study. Sehman is employed by Humana. Based on this research, 2 posters were presented at the Academy of Managed Care Pharmacy Nexus 2017 on October 16-19, 2017, in Dallas, Texas. Another poster was also presented at the International Society for Pharmacoeconomics and Outcomes Research (ISPOR) Annual European Congress on October 29-November 2, 2016, in Vienna, Austria.

Leveraging tagging and rating for recommendation: RMF meets weighted diffusion on tripartite graphs

NASA Astrophysics Data System (ADS)

Li, Jianguo; Tang, Yong; Chen, Jiemin

2017-10-01

Recommender systems (RSs) have been a widely exploited approach to solving the information overload problem. However, the performance is still limited due to the extreme sparsity of the rating data. With the popularity of Web 2.0, the social tagging system provides more external information to improve recommendation accuracy. Although some existing approaches combine the matrix factorization models with the tag co-occurrence and context of tags, they neglect the issue of tag sparsity that would also result in inaccurate recommendations. Consequently, in this paper, we propose a novel hybrid collaborative filtering model named WUDiff_RMF, which improves regularized matrix factorization (RMF) model by integrating Weighted User-Diffusion-based CF algorithm(WUDiff) that obtains the information of similar users from the weighted tripartite user-item-tag graph. This model aims to capture the degree correlation of the user-item-tag tripartite network to enhance the performance of recommendation. Experiments conducted on four real-world datasets demonstrate that our approach significantly performs better than already widely used methods in the accuracy of recommendation. Moreover, results show that WUDiff_RMF can alleviate the data sparsity, especially in the circumstance that users have made few ratings and few tags.

Production and validation of model iron-tannate dyed textiles for use as historic textile substitutes in stabilisation treatment studies

PubMed Central

2012-01-01

Background For millennia, iron-tannate dyes have been used to colour ceremonial and domestic objects shades of black, grey, or brown. Surviving iron-tannate dyed objects are part of our cultural heritage but their existence is threatened by the dye itself which can accelerate oxidation and acid hydrolysis of the substrate. This causes many iron-tannate dyed textiles to discolour and decrease in tensile strength and flexibility at a faster rate than equivalent undyed textiles. The current lack of suitable stabilisation treatments means that many historic iron-tannate dyed objects are rapidly crumbling to dust with the knowledge and value they hold being lost forever. This paper describes the production, characterisation, and validation of model iron-tannate dyed textiles as substitutes for historic iron-tannate dyed textiles in the development of stabilisation treatments. Spectrophotometry, surface pH, tensile testing, SEM-EDX, and XRF have been used to characterise the model textiles. Results On application to textiles, the model dyes imparted mid to dark blue-grey colouration, an immediate tensile strength loss of the textiles and an increase in surface acidity. The dyes introduced significant quantities of iron into the textiles which was distributed in the exterior and interior of the cotton, abaca, and silk fibres but only in the exterior of the wool fibres. As seen with historic iron-tannate dyed objects, the dyed cotton, abaca, and silk textiles lost tensile strength faster and more significantly than undyed equivalents during accelerated thermal ageing and all of the dyed model textiles, most notably the cotton, discoloured more than the undyed equivalents on ageing. Conclusions The abaca, cotton, and silk model textiles are judged to be suitable for use as substitutes for cultural heritage materials in the testing of stabilisation treatments. PMID:22616934

Complementary biomarker-based methods for characterising Arctic sea ice conditions: A case study comparison between multivariate analysis and the PIP25 index

NASA Astrophysics Data System (ADS)

Köseoğlu, Denizcan; Belt, Simon T.; Smik, Lukas; Yao, Haoyi; Panieri, Giuliana; Knies, Jochen

2018-02-01

The discovery of IP25 as a qualitative biomarker proxy for Arctic sea ice and subsequent introduction of the so-called PIP25 index for semi-quantitative descriptions of sea ice conditions has significantly advanced our understanding of long-term paleo Arctic sea ice conditions over the past decade. We investigated the potential for classification tree (CT) models to provide a further approach to paleo Arctic sea ice reconstruction through analysis of a suite of highly branched isoprenoid (HBI) biomarkers in ca. 200 surface sediments from the Barents Sea. Four CT models constructed using different HBI assemblages revealed IP25 and an HBI triene as the most appropriate classifiers of sea ice conditions, achieving a >90% cross-validated classification rate. Additionally, lower model performance for locations in the Marginal Ice Zone (MIZ) highlighted difficulties in characterisation of this climatically-sensitive region. CT model classification and semi-quantitative PIP25-derived estimates of spring sea ice concentration (SpSIC) for four downcore records from the region were consistent, although agreement between proxy and satellite/observational records was weaker for a core from the west Svalbard margin, likely due to the highly variable sea ice conditions. The automatic selection of appropriate biomarkers for description of sea ice conditions, quantitative model assessment, and insensitivity to the c-factor used in the calculation of the PIP25 index are key attributes of the CT approach, and we provide an initial comparative assessment between these potentially complementary methods. The CT model should be capable of generating longer-term temporal shifts in sea ice conditions for the climatically sensitive Barents Sea.

Authentication of Primordial Characteristics of the CLBL-1 Cell Line Prove the Integrity of a Canine B-Cell Lymphoma in a Murine In Vivo Model

PubMed Central

Reimann-Berg, Nicola; Walter, Ingrid; Fuchs-Baumgartinger, Andrea; Wagner, Siegfried; Kovacic, Boris; Essler, Sabine E.; Schwendenwein, Ilse; Nolte, Ingo; Saalmüller, Armin; Escobar, Hugo Murua

2012-01-01

Cell lines are key tools in cancer research allowing the generation of neoplasias in animal models resembling the initial tumours able to mimic the original neoplasias closely in vivo. Canine lymphoma is the major hematopoietic malignancy in dogs and considered as a valuable spontaneous large animal model for human Non-Hodgkin's Lymphoma (NHL). Herein we describe the establishment and characterisation of an in vivo model using the canine B-cell lymphoma cell line CLBL-1 analysing the stability of the induced tumours and the ability to resemble the original material. CLBL-1 was injected into Rag2−/−γc −/− mice. The generated tumor material was analysed by immunophenotyping and histopathology and used to establish the cell line CLBL-1M. Both cell lines were karyotyped for detection of chromosomal aberrations. Additionally, CLBL-1 was stimulated with IL-2 and DSP30 as described for primary canine B-cell lymphomas and NHL to examine the stimulatory effect on cell proliferation. CLBL-1 in vivo application resulted in lymphoma-like disease and tumor formation. Immunophenotypic analysis of tumorous material showed expression of CD45+, MHCII+, CD11a+ and CD79αcy+. PARR analysis showed positivity for IgH indicating a monoclonal character. These cytogenetic, molecular, immunophenotypical and histological characterisations of the in vivo model reveal that the induced tumours and thereof generated cell line resemble closely the original material. After DSP30 and IL-2 stimulation, CLBL-1 showed to respond in the same way as primary material. The herein described CLBL-1 in vivo model provides a highly stable tool for B-cell lymphoma research in veterinary and human medicine allowing various further in vivo studies. PMID:22761949

Authentication of primordial characteristics of the CLBL-1 cell line prove the integrity of a canine B-cell lymphoma in a murine in vivo model.

PubMed

Rütgen, Barbara C; Willenbrock, Saskia; Reimann-Berg, Nicola; Walter, Ingrid; Fuchs-Baumgartinger, Andrea; Wagner, Siegfried; Kovacic, Boris; Essler, Sabine E; Schwendenwein, Ilse; Nolte, Ingo; Saalmüller, Armin; Murua Escobar, Hugo

2012-01-01

Cell lines are key tools in cancer research allowing the generation of neoplasias in animal models resembling the initial tumours able to mimic the original neoplasias closely in vivo. Canine lymphoma is the major hematopoietic malignancy in dogs and considered as a valuable spontaneous large animal model for human Non-Hodgkin's Lymphoma (NHL). Herein we describe the establishment and characterisation of an in vivo model using the canine B-cell lymphoma cell line CLBL-1 analysing the stability of the induced tumours and the ability to resemble the original material. CLBL-1 was injected into Rag2(-/-)γ(c) (-/-) mice. The generated tumor material was analysed by immunophenotyping and histopathology and used to establish the cell line CLBL-1M. Both cell lines were karyotyped for detection of chromosomal aberrations. Additionally, CLBL-1 was stimulated with IL-2 and DSP30 as described for primary canine B-cell lymphomas and NHL to examine the stimulatory effect on cell proliferation. CLBL-1 in vivo application resulted in lymphoma-like disease and tumor formation. Immunophenotypic analysis of tumorous material showed expression of CD45(+), MHCII(+), CD11a(+) and CD79αcy(+). PARR analysis showed positivity for IgH indicating a monoclonal character. These cytogenetic, molecular, immunophenotypical and histological characterisations of the in vivo model reveal that the induced tumours and thereof generated cell line resemble closely the original material. After DSP30 and IL-2 stimulation, CLBL-1 showed to respond in the same way as primary material. The herein described CLBL-1 in vivo model provides a highly stable tool for B-cell lymphoma research in veterinary and human medicine allowing various further in vivo studies.

Production and validation of model iron-tannate dyed textiles for use as historic textile substitutes in stabilisation treatment studies.

PubMed

Wilson, Helen; Carr, Chris; Hacke, Marei

2012-05-22

For millennia, iron-tannate dyes have been used to colour ceremonial and domestic objects shades of black, grey, or brown. Surviving iron-tannate dyed objects are part of our cultural heritage but their existence is threatened by the dye itself which can accelerate oxidation and acid hydrolysis of the substrate. This causes many iron-tannate dyed textiles to discolour and decrease in tensile strength and flexibility at a faster rate than equivalent undyed textiles. The current lack of suitable stabilisation treatments means that many historic iron-tannate dyed objects are rapidly crumbling to dust with the knowledge and value they hold being lost forever.This paper describes the production, characterisation, and validation of model iron-tannate dyed textiles as substitutes for historic iron-tannate dyed textiles in the development of stabilisation treatments. Spectrophotometry, surface pH, tensile testing, SEM-EDX, and XRF have been used to characterise the model textiles. On application to textiles, the model dyes imparted mid to dark blue-grey colouration, an immediate tensile strength loss of the textiles and an increase in surface acidity. The dyes introduced significant quantities of iron into the textiles which was distributed in the exterior and interior of the cotton, abaca, and silk fibres but only in the exterior of the wool fibres. As seen with historic iron-tannate dyed objects, the dyed cotton, abaca, and silk textiles lost tensile strength faster and more significantly than undyed equivalents during accelerated thermal ageing and all of the dyed model textiles, most notably the cotton, discoloured more than the undyed equivalents on ageing. The abaca, cotton, and silk model textiles are judged to be suitable for use as substitutes for cultural heritage materials in the testing of stabilisation treatments.

Will Teide erupt again?

NASA Astrophysics Data System (ADS)

Marti, Joan; Geyer, Adelina

2016-04-01

The quantification of hazard in volcanic systems characterised by long repose period is difficult because the lack of knowledge of the past volcanic history and also because in many cases volcanism is not perceived as a potential problem, being only regarded as an attraction for tourism or a source of economic benefit, thus hiding the need to conduct hazard assessment. Teide, in the island of Tenerife (Canary Islands), is not an exception to this general rule and, despite being one of the largest composite volcanoes in the World, it is generally considered as a non-active volcano by population, visitors and even by some scientists. However, geological and geophysical evidence, including a large diversity of monitoring signals recorded during last decades, as well as a simple comparison with similar volcanoes that have erupted in recent times after hundreds or even thousands of years of quiescence, recommend to consider Teide as an active volcano and to take the necessary precaution in an island with nearly one million of permanent inhabitants and nearly 5 millions of visitors per year. What is the potential of Teide to erupt again? is the question that relies behind the fact of considering it as active, and that needs to be answered first. Based on the current volcanological, petrological and geophysical knowledge We propose a conceptual model on the magma recharge mechanisms, structure of the plumbing system, and eruption triggers and dynamics of Teide volcano that helps to understand its behaviour and to anticipate future activity. Ramón y Cajal contract (RYC-2012-11024)

Criteria to define a more relevant reference sample of titanium dioxide in the context of food: a multiscale approach.

PubMed

Dudefoi, William; Terrisse, Hélène; Richard-Plouet, Mireille; Gautron, Eric; Popa, Florin; Humbert, Bernard; Ropers, Marie-Hélène

2017-05-01

Titanium dioxide (TiO 2 ) is a transition metal oxide widely used as a white pigment in various applications, including food. Due to the classification of TiO 2 nanoparticles by the International Agency for Research on Cancer as potentially harmful for humans by inhalation, the presence of nanoparticles in food products needed to be confirmed by a set of independent studies. Seven samples of food-grade TiO 2 (E171) were extensively characterised for their size distribution, crystallinity and surface properties by the currently recommended methods. All investigated E171 samples contained a fraction of nanoparticles, however, below the threshold defining the labelling of nanomaterial. On the basis of these results and a statistical analysis, E171 food-grade TiO 2 totally differs from the reference material P25, confirming the few published data on this kind of particle. Therefore, the reference material P25 does not appear to be the most suitable model to study the fate of food-grade TiO 2 in the gastrointestinal tract. The criteria currently to obtain a representative food-grade sample of TiO 2 are the following: (1) crystalline-phase anatase, (2) a powder with an isoelectric point very close to 4.1, (3) a fraction of nanoparticles comprised between 15% and 45%, and (4) a low specific surface area around 10 m 2  g - 1 .

Spatial distribution of early red lesions is a risk factor for development of vision-threatening diabetic retinopathy.

PubMed

Ometto, Giovanni; Assheton, Phil; Calivá, Francesco; Chudzik, Piotr; Al-Diri, Bashir; Hunter, Andrew; Bek, Toke

2017-12-01

Diabetic retinopathy is characterised by morphological lesions related to disturbances in retinal blood flow. It has previously been shown that the early development of retinal lesions temporal to the fovea may predict the development of treatment-requiring diabetic maculopathy. The aim of this study was to map accurately the area where lesions could predict progression to vision-threatening retinopathy. The predictive value of the location of the earliest red lesions representing haemorrhages and/or microaneurysms was studied by comparing their occurrence in a group of individuals later developing vision-threatening diabetic retinopathy with that in a group matched with respect to diabetes type, age, sex and age of onset of diabetes mellitus who did not develop vision-threatening diabetic retinopathy during a similar observation period. The probability of progression to vision-threatening diabetic retinopathy was higher in a circular area temporal to the fovea, and the occurrence of the first lesions in this area was predictive of the development of vision-threatening diabetic retinopathy. The calculated peak value showed that the risk of progression was 39.5% higher than the average. There was no significant difference in the early distribution of lesions in participants later developing diabetic maculopathy or proliferative diabetic retinopathy. The location of early red lesions in diabetic retinopathy is predictive of whether or not individuals will later develop vision-threatening diabetic retinopathy. This evidence should be incorporated into risk models used to recommend control intervals in screening programmes for diabetic retinopathy.

Action Recommendation for Cyber Resilience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Choudhury, Sutanay; Rodriguez, Luke R.; Curtis, Darren S.

2015-09-01

This paper presents an unifying graph-based model for representing the infrastructure, behavior and missions of an enterprise. We describe how the model can be used to achieve resiliency against a wide class of failures and attacks. We introduce an algorithm for recommending resilience establishing actions based on dynamic updates to the models. Without loss of generality, we show the effectiveness of the algorithm for preserving latency based quality of service (QoS). Our models and the recommendation algorithms are implemented in a software framework that we seek to release as an open source framework for simulating resilient cyber systems.

Design Recommendations for Concrete Tunnel Linings : Volume II. Summary of Research and Proposed Recommendations.

DOT National Transportation Integrated Search

1983-11-01

The report presents design recommendations for concrete tunnel linings for transportation tunnels. The recommendations developed as a result of in-depth analysis and model testing of the behavior of concrete tunnel linings. The research addressed pro...

Hydrogeological characterisation of a glacially affected barrier island - the North Frisian Island of Föhr

NASA Astrophysics Data System (ADS)

Burschil, T.; Scheer, W.; Kirsch, R.; Wiederhold, H.

2012-04-01

We present the application of geophysical investigations to characterise and improve the geological/hydrogeological model through the estimation of petrophysical parameters for groundwater modelling. Seismic reflection and airborne electromagnetic surveys in combination with borehole information enhance the 3-D geological model and allow a petrophysical interpretation of the subsurface. The North Sea Island of Föhr has a very complex underground structure what was already known from boreholes. The local waterworks use a freshwater body embedded in saline groundwater. Several glaciations disordered the Youngest Tertiary and Quaternary sediments by glaciotectonic thrust-faulting as well as incision and refill of glacial valleys. Both underground structures have a strong impact on the distribution of freshwater bearing aquifers. An initial hydrogeological model of Föhr was built from borehole data alone and was restricted to the southern part of the island where in the sandy areas of the Geest a large freshwater body was formed. We improved the geological/hydrogeological model by adding data from different geophysical methods, e.g. airborne electromagnetics (EM) for mapping the resistivity of the entire island, seismic reflections for detailed cross sections in the groundwater catchment area, and geophysical borehole logging for calibration of these measurements. An integrated evaluation of the results from the different geophysical methods yields reliable data. To determinate petrophysical parameter about 18 borehole logs, more than 75 m deep, and nearby airborne EM inversion models were analyzed concerning resistivity. We establish an empirical relation between measured resistivity and hydraulic conductivity for the specific area - the North Sea island of Föhr. Five boreholes concerning seismic interval velocities discriminate sand and till. The interpretation of these data was the basis for building the geological/hydrogeological 3-D model. We fitted the relevant model layers to all geophysical and geological data and created a consistent 3-D model. This model is the fundament for groundwater simulations considering forecasted changes in precipitation and sea level rise due to climate change.

Sensitive fluorescent in situ hybridisation method for the characterisation of breast cancer cells in bone marrow aspirates.

PubMed Central

Forus, A; Høifødt, H K; Overli, G E; Myklebost, O; Fodstad, O

1999-01-01

AIM: The presence of malignant cells in the blood and bone marrow of patients with cancer at the time of surgery may be indicative of early relapse. In addition to their numbers, the phenotypes of the micrometastatic cells might be essential in determining whether overt metastases will develop. This study aimed to establish a sensitive method for the detection and characterisation of malignant cells present in bone marrow. METHODS: In spiking experiments, SKBR3 cells were mixed with mononuclear cells in known proportions to mimic bone marrow samples with micrometastatic cells. Tumour cells were extracted using SAM-M450 Dynabeads coupled to the MOC-31 anti-epithelial antibody, and were further analysed for amplification of erbB2 and int2 by fluorescent in situ hybridisation (FISH). erbB2 and int2 copy numbers were also determined in 15 primary breast cancers, and bone marrow samples from patients with amplification were analysed for micrometastatic cells by immunomagnetic enrichment and FISH. RESULTS: In model experiments, cells with amplification could be detected in bead selected fractions when ratios of tumour cells (SKBR3) to mononuclear cells were as low as 10:10(7). Among the tumour samples, eight showed increased copy numbers of erbB2 and/or int2, and three of these patients had detectable numbers of tumour cells in their bone marrow: 4000, 540, and 26 tumour cells/10(7) mononuclear cells, respectively. The patient with 540 tumour cells/10(7) mononuclear cells showed high level amplification of erbB2 and suffered from a particularly aggressive disease, whereas the patient with 4000 tumour cells/10(7) mononuclear cells had favourable disease progression. CONCLUSION: These results demonstrate the feasibility and advantage of combining immunomagnetic selection and FISH characterisation of cancer cells in bone marrow samples. It is possible that molecular characterisation of such cells could provide prognostically valuable information. PMID:10474684

Next generation microbiological risk assessment-Potential of omics data for hazard characterisation.

PubMed

Haddad, Nabila; Johnson, Nick; Kathariou, Sophia; Métris, Aline; Phister, Trevor; Pielaat, Annemarie; Tassou, Chrysoula; Wells-Bennik, Marjon H J; Zwietering, Marcel H

2018-04-12

According to the World Health Organization estimates in 2015, 600 million people fall ill every year from contaminated food and 420,000 die. Microbial risk assessment (MRA) was developed as a tool to reduce and prevent risks presented by pathogens and/or their toxins. MRA is organized in four steps to analyse information and assist in both designing appropriate control options and implementation of regulatory decisions and programs. Among the four steps, hazard characterisation is performed to establish the probability and severity of a disease outcome, which is determined as function of the dose of toxin and/or pathogen ingested. This dose-response relationship is subject to both variability and uncertainty. The purpose of this review/opinion article is to discuss how Next Generation Omics can impact hazard characterisation and, more precisely, how it can improve our understanding of variability and limit the uncertainty in the dose-response relation. The expansion of omics tools (e.g. genomics, transcriptomics, proteomics and metabolomics) allows for a better understanding of pathogenicity mechanisms and virulence levels of bacterial strains. Detection and identification of virulence genes, comparative genomics, analyses of mRNA and protein levels and the development of biomarkers can help in building a mechanistic dose-response model to predict disease severity. In this respect, systems biology can help to identify critical system characteristics that confer virulence and explain variability between strains. Despite challenges in the integration of omics into risk assessment, some omics methods have already been used by regulatory agencies for hazard identification. Standardized methods, reproducibility and datasets obtained from realistic conditions remain a challenge, and are needed to improve accuracy of hazard characterisation. When these improvements are realized, they will allow the health authorities and government policy makers to prioritize hazards more accurately and thus refine surveillance programs with the collaboration of all stakeholders of the food chain. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

Cancer Precision Medicine: Why More Is More and DNA Is Not Enough.

PubMed

Schütte, Moritz; Ogilvie, Lesley A; Rieke, Damian T; Lange, Bodo M H; Yaspo, Marie-Laure; Lehrach, Hans

2017-01-01

Every tumour is different. They arise in patients with different genomes, from cells with different epigenetic modifications, and by random processes affecting the genome and/or epigenome of a somatic cell, allowing it to escape the usual controls on its growth. Tumours and patients therefore often respond very differently to the drugs they receive. Cancer precision medicine aims to characterise the tumour (and often also the patient) to be able to predict, with high accuracy, its response to different treatments, with options ranging from the selective characterisation of a few genomic variants considered particularly important to predict the response of the tumour to specific drugs, to deep genome analysis of both tumour and patient, combined with deep transcriptome analysis of the tumour. Here, we compare the expected results of carrying out such analyses at different levels, from different size panels to a comprehensive analysis incorporating both patient and tumour at the DNA and RNA levels. In doing so, we illustrate the additional power gained by this unusually deep analysis strategy, a potential basis for a future precision medicine first strategy in cancer drug therapy. However, this is only a step along the way of increasingly detailed molecular characterisation, which in our view will, in the future, introduce additional molecular characterisation techniques, including systematic analysis of proteins and protein modification states and different types of metabolites in the tumour, systematic analysis of circulating tumour cells and nucleic acids, the use of spatially resolved analysis techniques to address the problem of tumour heterogeneity as well as the deep analyses of the immune system of the patient to, e.g., predict the response of the patient to different types of immunotherapy. Such analyses will generate data sets of even greater complexity, requiring mechanistic modelling approaches to capture enough of the complex situation in the real patient to be able to accurately predict his/her responses to all available therapies. © 2017 S. Karger AG, Basel.

European Symposium on Reliability of Electron Devices, Failure Physics and Analysis (5th)

DTIC Science & Technology

1994-10-07

Characterisation and Modelling WEDNESDAY 5th OCTOBER Session C Hot Carriers Session D Oxide States Session E Power Devices Workshop 2 Power Devices Session F...Medium Enterprises .......... 17 W2 Power Devices Workshop "Reliability of Power Semiconductors for Traction Applications...New Mexico, USA Sandia National Laboratories, Albuquerque, New Mexico, USA SESSION E Power Devices El Reliability Issues in New Technology