Validation of Storm Water Management Model Storm Control Measures Modules

NASA Astrophysics Data System (ADS)

Simon, M. A.; Platz, M. C.

2017-12-01

EPA's Storm Water Management Model (SWMM) is a computational code heavily relied upon by industry for the simulation of wastewater and stormwater infrastructure performance. Many municipalities are relying on SWMM results to design multi-billion-dollar, multi-decade infrastructure upgrades. Since the 1970's, EPA and others have developed five major releases, the most recent ones containing storm control measures modules for green infrastructure. The main objective of this study was to quantify the accuracy with which SWMM v5.1.10 simulates the hydrologic activity of previously monitored low impact developments. Model performance was evaluated with a mathematical comparison of outflow hydrographs and total outflow volumes, using empirical data and a multi-event, multi-objective calibration method. The calibration methodology utilized PEST++ Version 3, a parameter estimation tool, which aided in the selection of unmeasured hydrologic parameters. From the validation study and sensitivity analysis, several model improvements were identified to advance SWMM LID Module performance for permeable pavements, infiltration units and green roofs, and these were performed and reported herein. Overall, it was determined that SWMM can successfully simulate low impact development controls given accurate model confirmation, parameter measurement, and model calibration.

Optimal Spatial Design of Capacity and Quantity of Rainwater Catchment Systems for Urban Flood Mitigation

NASA Astrophysics Data System (ADS)

Huang, C.; Hsu, N.

2013-12-01

This study imports Low-Impact Development (LID) technology of rainwater catchment systems into a Storm-Water runoff Management Model (SWMM) to design the spatial capacity and quantity of rain barrel for urban flood mitigation. This study proposes a simulation-optimization model for effectively searching the optimal design. In simulation method, we design a series of regular spatial distributions of capacity and quantity of rainwater catchment facilities, and thus the reduced flooding circumstances using a variety of design forms could be simulated by SWMM. Moreover, we further calculate the net benefit that is equal to subtract facility cost from decreasing inundation loss and the best solution of simulation method would be the initial searching solution of the optimization model. In optimizing method, first we apply the outcome of simulation method and Back-Propagation Neural Network (BPNN) for developing a water level simulation model of urban drainage system in order to replace SWMM which the operating is based on a graphical user interface and is hard to combine with optimization model and method. After that we embed the BPNN-based simulation model into the developed optimization model which the objective function is minimizing the negative net benefit. Finally, we establish a tabu search-based algorithm to optimize the planning solution. This study applies the developed method in Zhonghe Dist., Taiwan. Results showed that application of tabu search and BPNN-based simulation model into the optimization model not only can find better solutions than simulation method in 12.75%, but also can resolve the limitations of previous studies. Furthermore, the optimized spatial rain barrel design can reduce 72% of inundation loss according to historical flood events.

Stormwater Management Model

EPA Science Inventory

SWMM is a model for urban hydrology. It has a long history and is relied upon by professional engineers in the US and around the world. SWMM provides both gray and green Infrastructure modeling capabilities. As such, it is a convenient tool for understanding the tradeoff between ...

THE STORM WATER MANAGEMENT MODEL (SWMM) AND RELATED WATERSHED TOOLS DEVELOPMENT

EPA Science Inventory

The Storm Water Management Model (SWMM) is a dynamic rainfall-runoff simulation model used for single event or long-term (continuous) simulation of runoff quantity and quality from primarily urban areas. It is the only publicly available model capable of performing a comprehensiv...

Storm Water Management Model Reference Manual Volume I, Hydrology

EPA Science Inventory

SWMM is a dynamic rainfall-runoff simulation model used for single event or long-term (continuous) simulation of runoff quantity and quality from primarily urban areas. The runoff component of SWMM operates on a collection of subcatchment areas that receive precipitation and gene...

Storm Water Management Model Reference Manual Volume II – Hydraulics

EPA Science Inventory

SWMM is a dynamic rainfall-runoff simulation model used for single event or long-term (continuous) simulation of runoff quantity and quality from primarily urban areas. The runoff component of SWMM operates on a collection of subcatchment areas that receive precipitation and gene...

SWMM 5 - A Case Study of Model Re-Development

EPA Science Inventory

By the turn of the 21st century the U.S. Environmental Protection Agency’s (EPA) Storm Water Management Model (SWMM) already had a 30-year history of extensive use throughout the world for analyzing complex hydrologic, hydraulic, and water quality problems related to urban draina...

Storm Water Management Model Reference Manual Volume III – Water Quality

EPA Science Inventory

SWMM is a dynamic rainfall-runoff simulation model used for single event or long-term (continuous) simulation of runoff quantity and quality from primarily urban areas. The runoff component of SWMM operates on a collection of subcatchment areas that receive precipitation and gene...

Urban stormwater inundation simulation based on SWMM and diffusive overland-flow model.

PubMed

Chen, Wenjie; Huang, Guoru; Zhang, Han

2017-12-01

With rapid urbanization, inundation-induced property losses have become more and more severe. Urban inundation modeling is an effective way to reduce these losses. This paper introduces a simplified urban stormwater inundation simulation model based on the United States Environmental Protection Agency Storm Water Management Model (SWMM) and a geographic information system (GIS)-based diffusive overland-flow model. SWMM is applied for computation of flows in storm sewer systems and flooding flows at junctions, while the GIS-based diffusive overland-flow model simulates surface runoff and inundation. One observed rainfall scenario on Haidian Island, Hainan Province, China was chosen to calibrate the model and the other two were used for validation. Comparisons of the model results with field-surveyed data and InfoWorks ICM (Integrated Catchment Modeling) modeled results indicated the inundation model in this paper can provide inundation extents and reasonable inundation depths even in a large study area.

Testing of SWMM Model’s LID Modules

EPA Science Inventory

EPA’s Storm Water Management Model (SWMM) is a computational code heavily relied upon by industry for the simulation of wastewater and stormwater infrastructure performance to . design and build multi-billion-dollar, multi-decade infrastructure upgrades. Since the 1970’s, EPA a...

Need to improve SWMM's subsurface flow routing algorithm for green infrastructure modeling

EPA Science Inventory

SWMM can simulate various subsurface flows, including groundwater (GW) release from a subcatchment to a node, percolation out of storage units and low impact development (LID) controls, and rainfall derived inflow and infiltration (RDII) at a node. Originally, the subsurface flow...

Modeling and Management of Increased Urban Stormwater Runoff Using InfoSWMM Sustain in the Berkeley Neighborhood of Denver, Colorado

NASA Astrophysics Data System (ADS)

Panos, C.; Hogue, T. S.; McCray, J. E.

2016-12-01

Few urban studies have evaluated the hydrologic impacts of redevelopment - for example, a rapid conversion from single to multi-family homes - known as infill, or re-urbanization. Redevelopment provides unique stormwater challenges as private property owners in many cities are not mandated to undertake stormwater retrofits leading to an overall increase in stormwater quantity and decrease in quality. This research utilizes a version of the EPA's Storm Water Management Model (SWMM), InfoSWMM Sustain, to model and analyze the impacts of impervious cover change due to redevelopment on stormwater quantity and quality in Denver, Colorado, with a focus on the Berkeley Neighborhood, where the percent imperviousness is expected to increase significantly from a current value of 53% by 2025. We utilize flow data from multiple pressure transducers installed directly within the storm sewer network as well as water quality data from storm and low flow sampling to initially calibrate InfoSWMM Sustain using September 2015 through September 2016 storm data. Model scenarios include current land cover conditions as well as future imperviousness predictions from redevelopment. The Urban Drainage and Flood Control District's Colorado Urban Hydrograph Procedure (CUHP) model is also implemented and used for calibration and comparison to the InfoSWMM stormwater model. Model simulations predicting an average annual stormwater runoff for the basin will be used to inform stormwater capture for the Berkeley Neighborhood on the downstream Willis Case Golf Course, where treatment trains are being designed to provide irrigation water (a 250 ac-ft per year demand) and improved water quality for discharge to the nearby receiving waters of Clear Creek. Ultimately, study results will better inform regional stormwater capture requirements when transitioning from single to multi-family units by providing a quantitative basis for treatment and regulation priorities.

Using EPA Tools and Data Services to Inform Changes to Design Storm Definitions for Wastewater Utilities based on Climate Model Projections

NASA Astrophysics Data System (ADS)

Tryby, M.; Fries, J. S.; Baranowski, C.

2014-12-01

Extreme precipitation events can cause significant impacts to drinking water and wastewater utilities, including facility damage, water quality impacts, service interruptions and potential risks to human health and the environment due to localized flooding and combined sewer overflows (CSOs). These impacts will become more pronounced with the projected increases in frequency and intensity of extreme precipitation events due to climate change. To model the impacts of extreme precipitation events, wastewater utilities often develop Intensity, Duration, and Frequency (IDF) rainfall curves and "design storms" for use in the U.S. Environmental Protection Agency's (EPA) Storm Water Management Model (SWMM). Wastewater utilities use SWMM for planning, analysis, and facility design related to stormwater runoff, combined and sanitary sewers, and other drainage systems in urban and non-urban areas. SWMM tracks (1) the quantity and quality of runoff made within each sub-catchment; and (2) the flow rate, flow depth, and quality of water in each pipe and channel during a simulation period made up of multiple time steps. In its current format, EPA SWMM does not consider climate change projection data. Climate change may affect the relationship between intensity, duration, and frequency described by past rainfall events. Therefore, EPA is integrating climate projection data available in the Climate Resilience Evaluation and Awareness Tool (CREAT) into SWMM. CREAT is a climate risk assessment tool for utilities that provides downscaled climate change projection data for changes in the amount of rainfall in a 24-hour period for various extreme precipitation events (e.g., from 5-year to 100-year storm events). Incorporating climate change projections into SWMM will provide wastewater utilities with more comprehensive data they can use in planning for future storm events, thereby reducing the impacts to the utility and customers served from flooding and stormwater issues.

Hydrological Modeling of Rainfall-Watershed-Bioretention System with EPA SWMM

NASA Astrophysics Data System (ADS)

gülbaz, sezar; melek kazezyılmaz-alhan, cevza

2016-04-01

Water resources should be protected for the sustainability of water supply and water quality. Human activities such as high urbanization with lack of infrastructure system and uncontrolled agricultural facilities adversely affect the water resources. Therefore, recent techniques should be investigated in detail to avoid present and future problems like flood, drought and water pollution. Low Impact Development-Best Management Practice (LID-BMP) is such a technique to manage storm water runoff and quality. There are several LID storm water BMPs such as bioretention facilities, rain gardens, storm water wetlands, vegetated rooftops, rain barrels, vegetative swales and permeable pavements. Bioretention is a type of Low Impact Developments (LIDs) implemented to diminish adverse effects of urbanization by reducing peak flows over the surface and improving surface water quality simultaneously. Different soil types in different ratios are considered in bioretention design which affects the performance of bioretention systems. Therefore, in this study, a hydrologic model for bioretention is developed by using Environmental Protection Agency Storm Water Management Model (EPA SWMM). Part of the input data is supplied to the hydrologic model by experimental setup called Rainfall-Watershed-Bioretention (RWB). RWB System is developed to investigate the relation among rainfall, watershed and bioretention. This setup consists of three main parts which are artificial rainfall system, drainage area and four bioretention columns with different soil mixture. EPA SWMM is a dynamic simulation model for the surface runoff which develops on a watershed during a rainfall event. The model is commonly used to plan, analyze, and control storm water runoff, to design drainage system components and to evaluate watershed management of both urban and rural areas. Furthermore, EPA SWMM is a well-known program to model LID-Bioretention in the literature. Therefore, EPA SWMM is employed in drainage and bioretention modeling. Calibration of hydrologic model is made using part of the measured data in RWB System for drainage area and for each bioretention column separately. Finally, performance of the model is evaluated by comparing the model results with the experimental data collected in RWB system.

Urban flood simulation and prioritization of critical urban sub-catchments using SWMM model and PROMETHEE II approach

NASA Astrophysics Data System (ADS)

Babaei, Sahar; Ghazavi, Reza; Erfanian, Mahdi

2018-06-01

Urban runoff increased due to augment of impervious surfaces. In order to flood mitigation during rainy season, determination of critical urban sub-catchments is very important for urban planners. Due to lack of information, adopting a simulation approach is one of the practical ways to identify the surcharged junctions and critical sub-catchments. Occurrence of destructive floods in the rainy seasons indicates the inappropriateness of the urban drainage system in Urmia. The main aims of this study were to estimate the surface runoff of urban sub-catchments using SWMM, to evaluate the accuracy of the drainage system of the study urban area and to prioritize sub-catchments using PROMETHEE II approach and SWMM. In the present study, the occurrence of rainfall event of the Urmia city (West Azerbaijan province, Iran) used for estimation of runoff depth. The study area was divided into 22 sub-catchments. For calibration and validation of model parameters, 3 rainfall events and their related runoff were measured. According to sensitivity analysis CN was the most sensitive parameter for model calibration. Amount of surcharged conduits and junctions indicates that the drainage system of the study area has not enough capacity for converting of the runoff and. For 10 year return period, depth of channels should increase by 20% for prevention of flooding in these sub-catchments. Sub-catchments were prioritized using PROMETHEE II approach and its results were compared with SWMM simulation outcomes. Based on SWMM simulation, S11, S7, S18, S16 and S1 sub-catchments are more critical sub-catchments respectively, while according to PROMETHEE method, S1, S11, S16, S14 and S18 are determined as the critical areas.

Application of SWMM in Water Resources Management: A Community Scale Study

NASA Astrophysics Data System (ADS)

Li, Yuan-Hua; Tung, Ching-Pin

2015-04-01

Under the impacts of climate change, water resource management faces a serious challenge. Due to extremely events, the water supply system is hard to maintain stable water supply. In order to decrease the pressure of centralized water supply system, the water demand management should be strengthened. The storm water management model (SWMM) is widely used to simulate surface runoff, and it has been improved to have the ability of continuous simulation. In this study, storm water management model (SWMM) is applied to simulate surface runoff and integrated into the framework of water resource management for a rural community scale. In a rural community, the surface runoff may be collected and treated by wetlands for later uses. The reclaimed water from wetlands may become a new water resource for non-contact domestic water uses, or be reused to meet irrigating water demand. Thus, the water demand from the centralized system can be reduced, and the water supply system may have lower risk under the climate change. On the other hand, SWMM can simulate the measures of low impact development (LID), such as bio-retention cell, green roof, rain barrel etc. The decentralized measures, LID, may not only reduce the runoff and delay the peak flow, and but also provide the service of water supply. In this study, LID is applied to water resource management of a rural community, and combined with the centralized water supply system. The results show the application of SWMM to water resources management in a community scale study. Besides, the effectiveness of LID on water supply is also evaluated.

Multiobjective optimization of low impact development stormwater controls

NASA Astrophysics Data System (ADS)

Eckart, Kyle; McPhee, Zach; Bolisetti, Tirupati

2018-07-01

Green infrastructure such as Low Impact Development (LID) controls are being employed to manage the urban stormwater and restore the predevelopment hydrological conditions besides improving the stormwater runoff water quality. Since runoff generation and infiltration processes are nonlinear, there is a need for identifying optimal combination of LID controls. A coupled optimization-simulation model was developed by linking the U.S. EPA Stormwater Management Model (SWMM) to the Borg Multiobjective Evolutionary Algorithm (Borg MOEA). The coupled model is capable of performing multiobjective optimization which uses SWMM simulations as a tool to evaluate potential solutions to the optimization problem. The optimization-simulation tool was used to evaluate low impact development (LID) stormwater controls. A SWMM model was developed, calibrated, and validated for a sewershed in Windsor, Ontario and LID stormwater controls were tested for three different return periods. LID implementation strategies were optimized using the optimization-simulation model for five different implementation scenarios for each of the three storm events with the objectives of minimizing peak flow in the stormsewers, reducing total runoff, and minimizing cost. For the sewershed in Windsor, Ontario, the peak run off and total volume of the runoff were found to reduce by 13% and 29%, respectively.

Evapotranspiration Calculator Desktop Tool

EPA Pesticide Factsheets

The Evapotranspiration Calculator estimates evapotranspiration time series data for hydrological and water quality models for the Hydrologic Simulation Program - Fortran (HSPF) and the Stormwater Management Model (SWMM).

Stormwater Runoff and Water Quality Modeling in Urban Maryland

NASA Astrophysics Data System (ADS)

Wang, J.; Forman, B. A.; Natarajan, P.; Davis, A.

2015-12-01

Urbanization significantly affects storm water runoff through the creation of new impervious surfaces such as highways, parking lots, and rooftops. Such changes can adversely impact the downstream receiving water bodies in terms of physical, chemical, and biological conditions. In order to mitigate the effects of urbanization on downstream water bodies, stormwater control measures (SCMs) have been widely used (e.g., infiltration basins, bioswales). A suite of observations from an infiltration basin installed adjacent to a highway in urban Maryland was used to evaluate stormwater runoff attenuation and pollutant removal rates at the well-instrumented SCM study site. In this study, the Storm Water Management Model (SWMM) was used to simulate the performance of the SCM. An automatic, split-sample calibration framework was developed to improve SWMM performance efficiency. The results indicate SWMM can accurately reproduce the hydraulic response of the SCM (in terms of reproducing measured inflow and outflow) during synoptic scale storm events lasting more than one day, but is less accurate during storm events lasting only a few hours. Similar results were found for a suite of modeled (and observed) water quality constituents, including suspended sediment, metals, N, P, and chloride.

Model Performance Evaluation and Scenario Analysis (MPESA)

EPA Pesticide Factsheets

Model Performance Evaluation and Scenario Analysis (MPESA) assesses the performance with which models predict time series data. The tool was developed Hydrological Simulation Program-Fortran (HSPF) and the Stormwater Management Model (SWMM)

An Open-Source Auto-Calibration Routine Supporting the Stormwater Management Model

NASA Astrophysics Data System (ADS)

Tiernan, E. D.; Hodges, B. R.

2017-12-01

The stormwater management model (SWMM) is a clustered model that relies on subcatchment-averaged parameter assignments to correctly capture catchment stormwater runoff behavior. Model calibration is considered a critical step for SWMM performance, an arduous task that most stormwater management designers undertake manually. This research presents an open-source, automated calibration routine that increases the efficiency and accuracy of the model calibration process. The routine makes use of a preliminary sensitivity analysis to reduce the dimensions of the parameter space, at which point a multi-objective function, genetic algorithm (modified Non-dominated Sorting Genetic Algorithm II) determines the Pareto front for the objective functions within the parameter space. The solutions on this Pareto front represent the optimized parameter value sets for the catchment behavior that could not have been reasonably obtained through manual calibration.

Hydrological Modeling of Storm Water Drainage System due to Frequent and Intense Precipitation of Dhaka city using Storm Water Management Model (SWMM)

NASA Astrophysics Data System (ADS)

Hossain, S., Jr.

2015-12-01

Rainfall induced flooding during rainy season is a regular phenomenon in Dhaka City. Almost every year a significant part of the city suffers badly with drainage congestion. There are some highly dense areas with lower ground elevation which submerge under water even with an intense precipitation of few hours. The higher areas also suffer with the drainage problem due to inadequate maintenance of the system and encroachment or illegal filling up of the drainage canals and lakes. Most part of the city suffered from long term urban flooding during historical extreme rainfall events in September 2004, 2007 and July 2009. The situation is likely to worsen in the future due to Climate Change, which may lead to more frequent and intense precipitation. To assess the major and minor drainage systems and elements of the urban basins using the hydrodynamic modelling and, through this, identifying the flooding events and areas, taking into account the current situation and future flood or drainage scenarios. Stormwater modeling has a major role in preventing issues such as flash floods and urban water-quality problems. Stormwater models of a lowered spatial resolution would thus appear valuable if only their ability to provide realistic results could be proved. The present scenario of urban morphology of Dhaka city and existing drainage system is complex for hydrological and hydrodynamic modeling. Furthermore limitations of background data and uncertain future urban scenarios may confine the potential outputs of a model. Although several studies were carried out including modeling for drainage master planning, a detail model for whole DAP (Detaile Area Plan) of Dhaka city area is not available. The model developed under this study is covering the existing drainage system in the study area as well as natural flows in the fringe area. A good number of models are available for hydrological and hydraulic analysis of urban areas. These are MIKE 11, MOUSE, HEC-RAS, HEC HMS and EPA SWMM. EPA-SWMM is used for the study area which is mostly developed and consists pipe networks, open channels and water bodies. This study proposes a methodology for rapid catchment delineation and stormwater management model (SWMM) set-up in a large urban area with model calibration and validation.

Modeling of a lot scale rainwater tank system in XP-SWMM: a case study in Western Sydney, Australia.

PubMed

van der Sterren, Marlène; Rahman, Ataur; Ryan, Garry

2014-08-01

Lot scale rainwater tank system modeling is often used in sustainable urban storm water management, particularly to estimate the reduction in the storm water run-off and pollutant wash-off at the lot scale. These rainwater tank models often cannot be adequately calibrated and validated due to limited availability of observed rainwater tank quantity and quality data. This paper presents calibration and validation of a lot scale rainwater tank system model using XP-SWMM utilizing data collected from two rainwater tank systems located in Western Sydney, Australia. The modeling considers run-off peak and volume in and out of the rainwater tank system and also a number of water quality parameters (Total Phosphorus (TP), Total Nitrogen (TN) and Total Solids (TS)). It has been found that XP-SWMM can be used successfully to develop a lot scale rainwater system model within an acceptable error margin. It has been shown that TP and TS can be predicted more accurately than TN using the developed model. In addition, it was found that a significant reduction in storm water run-off discharge can be achieved as a result of the rainwater tank up to about one year average recurrence interval rainfall event. The model parameter set assembled in this study can be used for developing lot scale rainwater tank system models at other locations in the Western Sydney region and in other parts of Australia with necessary adjustments for the local site characteristics. Copyright © 2014 Elsevier Ltd. All rights reserved.

Toolkit of Available EPA Green Infrastructure Modeling ...

EPA Pesticide Factsheets

This webinar will present a toolkit consisting of five EPA green infrastructure models and tools, along with communication material. This toolkit can be used as a teaching and quick reference resource for use by planners and developers when making green infrastructure implementation decisions. It can also be used for low impact development design competitions. Models and tools included: Green Infrastructure Wizard (GIWiz), Watershed Management Optimization Support Tool (WMOST), Visualizing Ecosystem Land Management Assessments (VELMA) Model, Storm Water Management Model (SWMM), and the National Stormwater Calculator (SWC). This webinar will present a toolkit consisting of five EPA green infrastructure models and tools, along with communication material. This toolkit can be used as a teaching and quick reference resource for use by planners and developers when making green infrastructure implementation decisions. It can also be used for low impact development design competitions. Models and tools included: Green Infrastructure Wizard (GIWiz), Watershed Management Optimization Support Tool (WMOST), Visualizing Ecosystem Land Management Assessments (VELMA) Model, Storm Water Management Model (SWMM), and the National Stormwater Calculator (SWC).

Water in the Balance: A Parking Lot Story

NASA Astrophysics Data System (ADS)

Haas, N. A.; Vitousek, S.

2017-12-01

The greater Chicagoland region has seen a high degree of urbanization since 1970. For example, between 1970-1990 the region experienced 4% population growth, a 35% increase in urban land use, and approximately 454 square miles of agricultural land was mostly converted into urban uses. Transformation of land into urban uses in the Chicagoland region has altered the stream and catchment response to rainfall events, specifically an increase in stream flashiness and increase in urban flooding. Chicago has begun to address these changes through green infrastructure. To understand the impact of green infrastructure at local, city-wide, and watershed scales, individual projects need to be accurately and sufficiently modeled. A traditional parking lot conversion into a porous parking lot at the University of Illinois at Chicago was modeled using SWMM and scrutinized using field data to look at stormwater runoff and water balance prior and post reconstruction. SWMM modeling suggested an 87% reduction in peak flow as well as a 100% reduction in flooding for a 24 hour, 1.72-inch storm. For the same storm, field data suggest an 89% reduction in peak flow as well as a 100% reduction in flooding. Modeling suggested 100% reductions in flooding for longer duration storms (24 hour+) and a smaller reduction in peak flow ( 66%). The highly parameterized SWMM model agrees well with collected data and analysis. Further effort is being made to use data mining to create correlations within the collected datasets that can be integrated into a model that follows a standardized formation process and reduces parameterization.

A New Climate Adjustment Tool: An update to EPA’s Storm Water Management Model

EPA Science Inventory

The US EPA’s newest tool, the Stormwater Management Model (SWMM) – Climate Adjustment Tool (CAT) is meant to help municipal stormwater utilities better address potential climate change impacts affecting their operations.

MODELING CONCEPTS FOR BMP/LID SIMULATION

EPA Science Inventory

Enhancement of simulation options for stormwater best management practices (BMPs) and hydrologic source control is discussed in the context of the EPA Storm Water Management Model (SWMM). Options for improvement of various BMP representations are presented, with emphasis on inco...

ENVIRONMENTAL TECHNOLOGY VERIFICATION OF URBAN RUNOFF MODELS

EPA Science Inventory

This paper will present the verification process and available results of the XP-SWMM modeling system produced by XP-Software conducted unde the USEPA's ETV Program. Wet weather flow (WWF) models are used throughout the US for the evaluation of storm and combined sewer systems. M...

SWMM Modeling Methods for Simulating Green Infrastructure at a Suburban Headwatershed: User’s Guide

EPA Science Inventory

Urban stormwater runoff quantity and quality are strongly dependent upon catchment properties. Models are used to simulate the runoff characteristics, but the output from a stormwater management model is dependent on how the catchment area is subdivided and represented as spatial...

Modeling urban storm rainfall runoff from diverse underlying surfaces and application for control design in Beijing.

PubMed

Ouyang, Wei; Guo, Bobo; Hao, Fanghua; Huang, Haobo; Li, Junqi; Gong, Yongwei

2012-12-30

Managing storm rainfall runoff is paramount in semi-arid regions with urban development. In Beijing, pollution prevention in urban storm runoff and storm water utilization has been identified as the primary strategy for urban water management. In this paper, we sampled runoff during storm rainfall events and analyzed the concentration of chemical oxygen demand (COD), total suspended solids (TSS) and total phosphorus (TP) in the runoff. Furthermore, the first flush effect of storm rainfall from diverse underlying surfaces was also analyzed. With the Storm Water Management Model (SWMM), the different impervious rates of underlying surfaces during the storm runoff process were expressed. The removal rates of three typical pollutants and their interactions with precipitation and underlying surfaces were identified. From these rates, the scenarios regarding the urban storm runoff pollution loading from different designs of underlying previous rates were assessed with the SWMM. First flush effect analysis showed that the first 20% of the storm runoff should be discarded, which can help in utilizing the storm water resource. The results of this study suggest that the SWMM can express in detail the storm water pollution patterns from diverse underlying surfaces in Beijing, which significantly affected water quality. The scenario analysis demonstrated that impervious rate adjustment has the potential to reduce runoff peak and decrease pollution loading. Copyright © 2012 Elsevier Ltd. All rights reserved.

STORM WATER MANAGEMENT MODEL QUALITY ASSURANCE REPORT: DYNAMIC WAVE FLOW ROUTING

EPA Science Inventory

The Storm Water Management Model (SWMM) is a computer-based tool for simulating storm water runoff quantity and quality from primarily urban areas. In 2002 the U.S. Environmental Protection Agency’s Water Supply and Water Resources Division partnered with the consulting firm CDM ...

Storm Water Management Model (SWMM)

EPA Science Inventory

Stormwater discharges continue to cause impairment of our Nation’s waterbodies. Regulations that require the retention and/or treatment of frequent, small storms that dominate runoff volumes and pollutant loads are becoming more common. The U.S. Environmental Protection Agency (E...

Research on the effect of rainfall flood regulation and control of wetland park based on SWMM model—a case study of wetland park in Yuanjia village, Qishan county, Shaanxi province

NASA Astrophysics Data System (ADS)

Xu, Da; Liu, Yijie

2018-02-01

Taking the wetland park of Yuan Village in Qishan County of Shaanxi Province as the research object, this paper makes a reasonable generalization of the study area, and establishes two models of low impact development (LID) and traditional development in the park. Meantime, rainwater in the surrounding built up area is introduced to into the park for digestion. SWMM model is used to simulate the variation of the total runoff, peak flow and peak time of two development models in Wetland Park under one-hour rainfall at different recurrence periods.The runoff control effect in each single LID facility in the one-hour rainfall once during five years in the built-up area is simulated. The simulation results show that the SWMM model can not only quantify the runoff reduction effect of different LID facilities, but also provide theoretical basis and data support for the urban rainfall flood problem. LID facilities have effects on runoff reduction and peak delay. However, the combined LID facility has obvious advantages for the peak time delay and peak flow control. A single LID facility is more efficient in a single runoff volume control. The order of runoff reduction by various LID facilities is as follows: Rain garden>combined LID facility> vegetative swale> bio-retention cell > permeable pavement. The order of peak time delay effect by the LID facilities is as follows: combined LID facility> Rain garden> vegetative swale> bio-retention cell > permeable pavement. The order of peak flow reduction efficiency by various LID facilities is: combined LID facility> Rain garden> bio-retention cell > vegetative swale> permeable pavement.

Application of Shuffled Frog Leaping Algorithm and Genetic Algorithm for the Optimization of Urban Stormwater Drainage

NASA Astrophysics Data System (ADS)

Kumar, S.; Kaushal, D. R.; Gosain, A. K.

2017-12-01

Urban hydrology will have an increasing role to play in the sustainability of human settlements. Expansion of urban areas brings significant changes in physical characteristics of landuse. Problems with administration of urban flooding have their roots in concentration of population within a relatively small area. As watersheds are urbanized, infiltration decreases, pattern of surface runoff is changed generating high peak flows, large runoff volumes from urban areas. Conceptual rainfall-runoff models have become a foremost tool for predicting surface runoff and flood forecasting. Manual calibration is often time consuming and tedious because of the involved subjectivity, which makes automatic approach more preferable. The calibration of parameters usually includes numerous criteria for evaluating the performances with respect to the observed data. Moreover, derivation of objective function assosciat6ed with the calibration of model parameters is quite challenging. Various studies dealing with optimization methods has steered the embracement of evolution based optimization algorithms. In this paper, a systematic comparison of two evolutionary approaches to multi-objective optimization namely shuffled frog leaping algorithm (SFLA) and genetic algorithms (GA) is done. SFLA is a cooperative search metaphor, stimulated by natural memetics based on the population while, GA is based on principle of survival of the fittest and natural evolution. SFLA and GA has been employed for optimizing the major parameters i.e. width, imperviousness, Manning's coefficient and depression storage for the highly urbanized catchment of Delhi, India. The study summarizes the auto-tuning of a widely used storm water management model (SWMM), by internal coupling of SWMM with SFLA and GA separately. The values of statistical parameters such as, Nash-Sutcliffe efficiency (NSE) and Percent Bias (PBIAS) were found to lie within the acceptable limit, indicating reasonably good model performance. Overall, this study proved promising for assessing risk in urban drainage systems and should prove useful to improve integrity of the urban system, its reliability and provides guidance for inundation preparedness.Keywords: Hydrologic model, SWMM, Urbanization, SFLA and GA.

Storm Water Management Model User’s Manual Version 5.1 - manual

EPA Science Inventory

SWMM 5 provides an integrated environment for editing study area input data, running hydrologic, hydraulic and water quality simulations, and viewing the results in a variety of formats. These include color-coded drainage area and conveyance system maps, time series graphs and ta...

Laboratory Simulation of Urban Runoff and Estimation of Runoff Hydrographs with Experimental Curve Numbers Implemented in USEPA SWMM

EPA Science Inventory

The prognostic capabilities of a lumped hydrologic modeling approach may be complicated by routing and connectivity among infiltrative and impervious surfaces. We used artificial rainfall to generate runoff from impervious and bare soil boxes arranged in series to simulate differ...

Coupled 1-D sewer and street networks and 2-D flooding model to rapidly evaluate surface inundation

NASA Astrophysics Data System (ADS)

Kao, Hong-Ming; Hsu, Hao-Ming

2017-04-01

Flash floods have occurred frequently in the urban areas around the world and cause the infrastructure and people living to expose continuously in the high risk level of pluvial flooding. According to historical surveys, the major reasons of severe surface inundations in the urban areas can be attributed to heavy rainfall in the short time and/or drainage system failure. In order to obtain real-time flood forecasting with high accuracy and less uncertainty, an appropriate system for predicting floods is necessary. For the reason, this study coupled 1-D sewer and street networks and 2-D flooding model as an operational modelling system for rapidly evaluating surface inundation. The proposed system is constructed by three significant components: (1) all the rainfall-runoff of a sub-catchment collected via gullies is simulated by the RUNOFF module of the Storm Water Management Model (SWMM); (2) and directly drained to the 1-D sewer and street networks via manholes as inflow discharges to conduct flow routing by using the EXTRAN module of SWMM; (3) after the 1-D simulations, the surcharges from manholes are considered as point sources in 2-D overland flow simulations that are executed by the WASH123D model. It can thus be used for urban flood modelling that reflects the rainfall-runoff processes, and the dynamic flow interactions between the storm sewer system and the ground surface in urban areas. In the present study, we adopted the Huwei Science and Technology Park, located in the south-western part of Taiwan, as the demonstration area because of its high industrial values. The region has an area about 1 km2 with approximately 1 km in both length and width. It is as isolated urban drainage area in which there is a complete sewer system that collects the runoff and drains to the detention pond. Based on the simulated results, the proposed modelling system was found that the simulated floods fit to the survey records because the physical rainfall-runoff phenomena in urban environment were better reflected. Keywords: SWMM, WASH123D, surface inundation, real-time.

Drainage area characterization for evaluating green infrastructure using the Storm Water Management Model

NASA Astrophysics Data System (ADS)

Lee, Joong Gwang; Nietch, Christopher T.; Panguluri, Srinivas

2018-05-01

Urban stormwater runoff quantity and quality are strongly dependent upon catchment properties. Models are used to simulate the runoff characteristics, but the output from a stormwater management model is dependent on how the catchment area is subdivided and represented as spatial elements. For green infrastructure modeling, we suggest a discretization method that distinguishes directly connected impervious area (DCIA) from the total impervious area (TIA). Pervious buffers, which receive runoff from upgradient impervious areas should also be identified as a separate subset of the entire pervious area (PA). This separation provides an improved model representation of the runoff process. With these criteria in mind, an approach to spatial discretization for projects using the US Environmental Protection Agency's Storm Water Management Model (SWMM) is demonstrated for the Shayler Crossing watershed (SHC), a well-monitored, residential suburban area occupying 100 ha, east of Cincinnati, Ohio. The model relies on a highly resolved spatial database of urban land cover, stormwater drainage features, and topography. To verify the spatial discretization approach, a hypothetical analysis was conducted. Six different representations of a common urbanscape that discharges runoff to a single storm inlet were evaluated with eight 24 h synthetic storms. This analysis allowed us to select a discretization scheme that balances complexity in model setup with presumed accuracy of the output with respect to the most complex discretization option considered. The balanced approach delineates directly and indirectly connected impervious areas (ICIA), buffering pervious area (BPA) receiving impervious runoff, and the other pervious area within a SWMM subcatchment. It performed well at the watershed scale with minimal calibration effort (Nash-Sutcliffe coefficient = 0.852; R2 = 0.871). The approach accommodates the distribution of runoff contributions from different spatial components and flow pathways that would impact green infrastructure performance. A developed SWMM model using the discretization approach is calibrated by adjusting parameters per land cover component, instead of per subcatchment and, therefore, can be applied to relatively large watersheds if the land cover components are relatively homogeneous and/or categorized appropriately in the GIS that supports the model parameterization. Finally, with a few model adjustments, we show how the simulated stream hydrograph can be separated into the relative contributions from different land cover types and subsurface sources, adding insight to the potential effectiveness of planned green infrastructure scenarios at the watershed scale.

Developing a stochastic conflict resolution model for urban runoff quality management: Application of info-gap and bargaining theories

NASA Astrophysics Data System (ADS)

Ghodsi, Seyed Hamed; Kerachian, Reza; Estalaki, Siamak Malakpour; Nikoo, Mohammad Reza; Zahmatkesh, Zahra

2016-02-01

In this paper, two deterministic and stochastic multilateral, multi-issue, non-cooperative bargaining methodologies are proposed for urban runoff quality management. In the proposed methodologies, a calibrated Storm Water Management Model (SWMM) is used to simulate stormwater runoff quantity and quality for different urban stormwater runoff management scenarios, which have been defined considering several Low Impact Development (LID) techniques. In the deterministic methodology, the best management scenario, representing location and area of LID controls, is identified using the bargaining model. In the stochastic methodology, uncertainties of some key parameters of SWMM are analyzed using the info-gap theory. For each water quality management scenario, robustness and opportuneness criteria are determined based on utility functions of different stakeholders. Then, to find the best solution, the bargaining model is performed considering a combination of robustness and opportuneness criteria for each scenario based on utility function of each stakeholder. The results of applying the proposed methodology in the Velenjak urban watershed located in the northeastern part of Tehran, the capital city of Iran, illustrate its practical utility for conflict resolution in urban water quantity and quality management. It is shown that the solution obtained using the deterministic model cannot outperform the result of the stochastic model considering the robustness and opportuneness criteria. Therefore, it can be concluded that the stochastic model, which incorporates the main uncertainties, could provide more reliable results.

Simulation of Urban Rainfall-Runoff in Piedmont Cities: A Case Study in Jinan City, China

NASA Astrophysics Data System (ADS)

Chang, X.; Xu, Z.; Zhao, G.; Li, H.

2017-12-01

During the past decades, frequent flooding disasters in urban areas resulted in catastrophic impacts such as human life casualties and property damages especially in piedmont cities due to its specific topography. In this study, a piedmont urban flooding model was developed in the Huangtaiqiao catchment based on SWMM. The sub-catchments in this piedmont area were divided into mountainous area, plain area and main urban area according to the variations of underlying surface topography. The impact of different routing mode and channel roughness on simulation results was quantitatively analyzed under different types of scenarios, and genetic algorithm was used to optimize model parameters. Results show that the simulation is poor (with a mean Nash coefficient of 0.61) when using the traditional routing mode in SWMM model, which usually ignores terrain variance in piedmont area. However, when the difference of routing mode, percent routed and channel roughness are considered, the prediction precision of model were significantly increased (with a mean Nash coefficient of 0.86), indicating that the difference of surface topography significantly affects the simulation results in piedmont cities. The relevant results would provide the scientific basis and technical support for rainfall-runoff simulation, flood control and disaster alleviation in piedmont cities.

Modelling of green roofs' hydrologic performance using EPA's SWMM.

PubMed

Burszta-Adamiak, E; Mrowiec, M

2013-01-01

Green roofs significantly affect the increase in water retention and thus the management of rain water in urban areas. In Poland, as in many other European countries, excess rainwater resulting from snowmelt and heavy rainfall contributes to the development of local flooding in urban areas. Opportunities to reduce surface runoff and reduce flood risks are among the reasons why green roofs are more likely to be used also in this country. However, there are relatively few data on their in situ performance. In this study the storm water performance was simulated for the green roofs experimental plots using the Storm Water Management Model (SWMM) with Low Impact Development (LID) Controls module (version 5.0.022). The model consists of many parameters for a particular layer of green roofs but simulation results were unsatisfactory considering the hydrologic response of the green roofs. For the majority of the tested rain events, the Nash coefficient had negative values. It indicates a weak fit between observed and measured flow-rates. Therefore complexity of the LID module does not affect the increase of its accuracy. Further research at a technical scale is needed to determine the role of the green roof slope, vegetation cover and drying process during the inter-event periods.

[Characteristics of rainfall and runoff in urban drainage based on the SWMM model.

PubMed

Xiong, Li Jun; Huang, Fei; Xu, Zu Xin; Li, Huai Zheng; Gong, Ling Ling; Dong, Meng Ke

2016-11-18

The characteristics of 235 rainfall and surface runoff events, from 2009 to 2011 in a typical urban drainage area in Shanghai were analyzed by using SWMM model. The results showed that the rainfall events in the region with high occurrence frequency were characterized by small rainfall amount and low intensity. The most probably occurred rainfall had total amount less than 10 mm, or mean intensity less than 5 mm·h -1 ,or peak intensity less than 10 mm·h -1 , accounting for 66.4%, 88.8% and 79.6% of the total rainfall events, respectively. The study was of great significance to apply low-impact development to reduce runoff and non-point source pollution under condition of less rainfall amount or low mean rainfall intensity in the area. The runoff generally increased with the increase of rainfall. The threshold of regional occurring runoff was controlled by not only rainfall amount, but also mean rainfall intensity and rainfall duration. In general, there was no surface runoff when the rainfall amount was less than 2 mm. When the rainfall amount was between 2 to 4 mm and the mean rainfall intensity was below 1.6 mm·h -1 , the runoff was less than 1 mm. When the rainfall exceeded 4 mm and the mean rainfall intensity was larger than 1.6 mm·h -1 , the runoff would occur generally. Based on the results of the SWMM simulation, three regression equations that were applicable to regional runoff amount and rainfall factors were established. The adjustment R 2 of the three equations were greater than 0.97. This indicated that the equations could reflect well the relationship between runoff and rainfall variables. The results provided the basis of calculations to plan low impact development and better reduce overflow pollution in local drainage area. It also could serve as a useful reference for runoff study in similar drainage areas.

Evaluation of accuracy of linear regression models in predicting urban stormwater discharge characteristics.

PubMed

Madarang, Krish J; Kang, Joo-Hyon

2014-06-01

Stormwater runoff has been identified as a source of pollution for the environment, especially for receiving waters. In order to quantify and manage the impacts of stormwater runoff on the environment, predictive models and mathematical models have been developed. Predictive tools such as regression models have been widely used to predict stormwater discharge characteristics. Storm event characteristics, such as antecedent dry days (ADD), have been related to response variables, such as pollutant loads and concentrations. However it has been a controversial issue among many studies to consider ADD as an important variable in predicting stormwater discharge characteristics. In this study, we examined the accuracy of general linear regression models in predicting discharge characteristics of roadway runoff. A total of 17 storm events were monitored in two highway segments, located in Gwangju, Korea. Data from the monitoring were used to calibrate United States Environmental Protection Agency's Storm Water Management Model (SWMM). The calibrated SWMM was simulated for 55 storm events, and the results of total suspended solid (TSS) discharge loads and event mean concentrations (EMC) were extracted. From these data, linear regression models were developed. R(2) and p-values of the regression of ADD for both TSS loads and EMCs were investigated. Results showed that pollutant loads were better predicted than pollutant EMC in the multiple regression models. Regression may not provide the true effect of site-specific characteristics, due to uncertainty in the data. Copyright © 2014 The Research Centre for Eco-Environmental Sciences, Chinese Academy of Sciences. Published by Elsevier B.V. All rights reserved.

Simulation and Evaluation of Low Impact Development of Urban Residential District Based on SWMM and GIS

NASA Astrophysics Data System (ADS)

Huang, Tielan; Wang, Yunpeng; Zhang, Jinlan

2017-07-01

In this study, simulation and evaluation of low impact development in resident district was carried out based on Storm Water Management Model (SWMM) and GIS method. In the evaluation model, we added 3 kinds of low impact development facilities, namely permeable pavement, rainwater garden, and green roof. These facilities are used alone or in combination. The model was run under five different rainfall reappearing periods. The simulation results using low impact development facilities were compared with simulation results under the current situation and undeveloped state. The results show that the total amount of runoff was greatly reduced by using various types of low impact development facilities in the urban residential district. The maximum reduction rate was using permeable pavement, reached 29.9%, followed was using rainwater garden, and the worst was using green roof. The lowest cost of reduction of the total amount of runoff was using permeable pavement, the followed was using rainwater garden, and the highest was using green roof. The combination scheme of various low impact development facilities has the highest efficiency of reducing total amount of runoff, and the lowest cost, which considering of the actual situation of the study area. The study indicated that application of low impact development facilities can reduce surface runoff effectively, which should be a useful way for prevention of urban waterlogging.

Urban Stormwater Management Model and Tools for Designing Stormwater Management of Green Infrastructure Practices

NASA Astrophysics Data System (ADS)

Haris, H.; Chow, M. F.; Usman, F.; Sidek, L. M.; Roseli, Z. A.; Norlida, M. D.

2016-03-01

Urbanization is growing rapidly in Malaysia. Rapid urbanization has known to have several negative impacts towards hydrological cycle due to decreasing of pervious area and deterioration of water quality in stormwater runoff. One of the negative impacts of urbanization is the congestion of the stormwater drainage system and this situation leading to flash flood problem and water quality degradation. There are many urban stormwater management softwares available in the market such as Storm Water Drainage System design and analysis program (DRAINS), Urban Drainage and Sewer Model (MOUSE), InfoWorks River Simulation (InfoWork RS), Hydrological Simulation Program-Fortran (HSPF), Distributed Routing Rainfall-Runoff Model (DR3M), Storm Water Management Model (SWMM), XP Storm Water Management Model (XPSWMM), MIKE-SWMM, Quality-Quantity Simulators (QQS), Storage, Treatment, Overflow, Runoff Model (STORM), and Hydrologic Engineering Centre-Hydrologic Modelling System (HEC-HMS). In this paper, we are going to discuss briefly about several softwares and their functionality, accessibility, characteristics and components in the quantity analysis of the hydrological design software and compare it with MSMA Design Aid and Database. Green Infrastructure (GI) is one of the main topics that has widely been discussed all over the world. Every development in the urban area is related to GI. GI can be defined as green area build in the develop area such as forest, park, wetland or floodway. The role of GI is to improve life standard such as water filtration or flood control. Among the twenty models that have been compared to MSMA SME, ten models were selected to conduct a comprehensive review for this study. These are known to be widely accepted by water resource researchers. These ten tools are further classified into three major categories as models that address the stormwater management ability of GI in terms of quantity and quality, models that have the capability of conducting the economic analysis of GI and models that can address both stormwater management and economic aspects together.

Modelling the ability of source control measures to reduce inundation risk in a community-scale urban drainage system

NASA Astrophysics Data System (ADS)

Mei, Chao; Liu, Jiahong; Wang, Hao; Shao, Weiwei; Xia, Lin; Xiang, Chenyao; Zhou, Jinjun

2018-06-01

Urban inundation is a serious challenge that increasingly confronts the residents of many cities, as well as policymakers, in the context of rapid urbanization and climate change worldwide. In recent years, source control measures (SCMs) such as green roofs, permeable pavements, rain gardens, and vegetative swales have been implemented to address flood inundation in urban settings, and proven to be cost-effective and sustainable. In order to investigate the ability of SCMs on reducing inundation in a community-scale urban drainage system, a dynamic rainfall-runoff model of a community-scale urban drainage system was developed based on SWMM. SCMs implementing scenarios were modelled under six design rainstorm events with return period ranging from 2 to 100 years, and inundation risks of the drainage system were evaluated before and after the proposed implementation of SCMs, with a risk-evaluation method based on SWMM and analytic hierarchy process (AHP). Results show that, SCMs implementation resulting in significantly reduction of hydrological indexes that related to inundation risks, range of reduction rates of average flow, peak flow, and total flooded volume of the drainage system were 28.1-72.1, 19.0-69.2, and 33.9-56.0 %, respectively, under six rainfall events with return periods ranging from 2 to 100 years. Corresponding, the inundation risks of the drainage system were significantly reduced after SCMs implementation, the risk values falling below 0.2 when the rainfall return period was less than 10 years. Simulation results confirm the effectiveness of SCMs on mitigating inundation, and quantified the potential of SCMs on reducing inundation risks in the urban drainage system, which provided scientific references for implementing SCMs for inundation control of the study area.

SWMM IMPROVEMENT FOR ANALYZING BMP/LTD PERFORMANCE

EPA Science Inventory

Pollution and treatment costs associated with wet weather flows (WWFs) have caused a need for reducing stormwater runoff volumes as well as loads. A number of strategies and best management practices (BMPs) are being used to mitigate runoff volumes and associated nonpoint source...

Incorporating Storm Sewer Exfiltration into SWMM: Proof of Concept

EPA Science Inventory

This study evaluates the peak flow and volume reduction achieved by exfiltration from a perforated storm sewer in an urban catchment. There are three related objectives: [1] quantify peak flow and volume reduction; [2] demonstrate adaptability to climate change; and [3] evaluate ...

Analysis of the stormwater drainage of the historic walls of Cartagena de Indias between the bastions of San Lucas, Santa Catalina and Santa Clara

NASA Astrophysics Data System (ADS)

Utria, A.; Saba, M.; Quiñones-Bolaños, E.

2017-12-01

The city walls of Cartagena between the Baluarte of San Lucas and Santa Clara reflects the consequences of poor stormwater drainage. In the present investigation the current drainage state of this area have been evaluated, assessing its sizing and conditions to be then modelled through SWMM 5 software for return periods of 5, 10, 15 and 20 years respectively. Finally, it has been determined that the physical deterioration of the drainage elements justifies the malfunction of the whole system, therefore cleaning and periodic maintenance of the drainage elements is strongly suggested.

Optimization of green infrastructure network at semi-urbanized watersheds to manage stormwater volume, peak flow and life cycle cost: Case study of Dead Run watershed in Maryland

NASA Astrophysics Data System (ADS)

Heidari Haratmeh, B.; Rai, A.; Minsker, B. S.

2016-12-01

Green Infrastructure (GI) has become widely known as a sustainable solution for stormwater management in urban environments. Despite more recognition and acknowledgment, researchers and practitioners lack clear and explicit guidelines on how GI practices should be implemented in urban settings. This study is developing a noisy-based multi-objective, multi-scaled genetic algorithm that determines optimal GI networks for environmental, economic and social objectives. The methodology accounts for uncertainty in modeling results and is designed to perform at sub-watershed as well as patch scale using two different simulation models, SWMM and RHESSys, in a Cloud-based implementation using a Web interface. As an initial case study, a semi-urbanized watershed— DeadRun 5— in Baltimore County, Maryland, is selected. The objective of the study is to minimize life cycle cost, maximize human preference for human well-being and the difference between pre-development hydrographs generated from current rainfall events and design storms, as well as those that result from proposed GI scenarios. Initial results for DeadRun5 watershed suggest that placing GI in the proximity of the watershed outlet optimizes life cycle cost, stormwater volume, and peak flow capture. The framework can easily present outcomes of GI design scenarios to both designers and local stakeholders, and future plans include receiving feedback from users on candidate designs, and interactively updating optimal GI network designs in a crowd-sourced design process. This approach can also be helpful in deriving design guidelines that better meet stakeholder needs.

Runoff forecasting using a Takagi-Sugeno neuro-fuzzy model with online learning

NASA Astrophysics Data System (ADS)

Talei, Amin; Chua, Lloyd Hock Chye; Quek, Chai; Jansson, Per-Erik

2013-04-01

SummaryA study using local learning Neuro-Fuzzy System (NFS) was undertaken for a rainfall-runoff modeling application. The local learning model was first tested on three different catchments: an outdoor experimental catchment measuring 25 m2 (Catchment 1), a small urban catchment 5.6 km2 in size (Catchment 2), and a large rural watershed with area of 241.3 km2 (Catchment 3). The results obtained from the local learning model were comparable or better than results obtained from physically-based, i.e. Kinematic Wave Model (KWM), Storm Water Management Model (SWMM), and Hydrologiska Byråns Vattenbalansavdelning (HBV) model. The local learning algorithm also required a shorter training time compared to a global learning NFS model. The local learning model was next tested in real-time mode, where the model was continuously adapted when presented with current information in real time. The real-time implementation of the local learning model gave better results, without the need for retraining, when compared to a batch NFS model, where it was found that the batch model had to be retrained periodically in order to achieve similar results.

A Multi-criteria Decision Analysis System for Prioritizing Sites and Types of Low Impact Development Practices

NASA Astrophysics Data System (ADS)

Song, Jae Yeol; Chung, Eun-Sung

2017-04-01

This study developed a multi-criteria decision analysis framework to prioritize sites and types of low impact development (LID) practices. This framework was systemized as a web-based system coupled with the Storm Water Management Model (SWMM) from the Environmental Protection Agency (EPA). Using the technique for order of preference by similarity to ideal solution (TOPSIS), which is a type of multi-criteria decision-making (MCDM) method, multiple types and sites of designated LID practices are prioritized. This system is named the Water Management Prioritization Module (WMPM) and is an improved version of the Water Management Analysis Module (WMAM) that automatically generates and simulates multiple scenarios of LID design and planning parameters for a single LID type. WMPM can simultaneously determine the priority of multiple LID types and sites. In this study, an infiltration trench and permeable pavement were considered for multiple sub-catchments in South Korea to demonstrate the WMPM procedures. The TOPSIS method was manually incorporated to select the vulnerable target sub-catchments and to prioritize the LID planning scenarios for multiple types and sites considering socio-economic, hydrologic and physical-geometric factors. In this application, the Delphi method and entropy theory were used to determine the subjective and objective weights, respectively. Comparing the ranks derived by this system, two sub-catchments, S16 and S4, out of 18 were considered to be the most suitable places for installing an infiltration trench and porous pavement to reduce the peak and total flow, respectively, considering both socio-economic factors and hydrological effectiveness. WMPM can help policy-makers to objectively develop urban water plans for sustainable development. Keywords: Low Impact Development, Multi-Criteria Decision Analysis, SWMM, TOPSIS, Water Management Prioritization Module (WMPM)

[Watershed water environment pollution models and their applications: a review].

PubMed

Zhu, Yao; Liang, Zhi-Wei; Li, Wei; Yang, Yi; Yang, Mu-Yi; Mao, Wei; Xu, Han-Li; Wu, Wei-Xiang

2013-10-01

Watershed water environment pollution model is the important tool for studying watershed environmental problems. Through the quantitative description of the complicated pollution processes of whole watershed system and its parts, the model can identify the main sources and migration pathways of pollutants, estimate the pollutant loadings, and evaluate their impacts on water environment, providing a basis for watershed planning and management. This paper reviewed the watershed water environment models widely applied at home and abroad, with the focuses on the models of pollutants loading (GWLF and PLOAD), water quality of received water bodies (QUAL2E and WASP), and the watershed models integrated pollutant loadings and water quality (HSPF, SWAT, AGNPS, AnnAGNPS, and SWMM), and introduced the structures, principles, and main characteristics as well as the limitations in practical applications of these models. The other models of water quality (CE-QUAL-W2, EFDC, and AQUATOX) and watershed models (GLEAMS and MIKE SHE) were also briefly introduced. Through the case analysis on the applications of single model and integrated models, the development trend and application prospect of the watershed water environment pollution models were discussed.

Modeling urban flood risk territories for Riga city

NASA Astrophysics Data System (ADS)

Piliksere, A.; Sennikovs, J.; Virbulis, J.; Bethers, U.; Bethers, P.; Valainis, A.

2012-04-01

Riga, the capital of Latvia, is located on River Daugava at the Gulf of Riga. The main flooding risks of Riga city are: (1) storm caused water setup in South part of Gulf of Riga (storm event), (2) water level increase caused by Daugava River discharge maximums (spring snow melting event) and (3) strong rainfall or rapid snow melting in densely populated urban areas. The first two flooding factors were discussed previously (Piliksere et al, 2011). The aims of the study were (1) the identification of the flood risk situations in densely populated areas, (2) the quantification of the flooding scenarios caused by rain and snow melting events of different return periods nowadays, in the near future (2021-2050), far future (2071-2100) taking into account the projections of climate change, (3) estimation of groundwater level for Riga city, (4) the building and calibration of the hydrological mathematical model based on SWMM (EPA, 2004) for the domain potentially vulnerable for rain and snow melt flooding events, (5) the calculation of rain and snow melting flood events with different return periods, (6) mapping the potentially flooded areas on a fine grid. The time series of short term precipitation events during warm time period of year (id est. rain events) were analyzed for 35 year long time period. Annual maxima of precipitation intensity for events with different duration (5 min; 15 min; 1h; 3h; 6h; 12h; 1 day; 2 days; 4 days; 10 days) were calculated. The time series of long term simultaneous precipitation data and observations of the reduction of thickness of snow cover were analyzed for 27 year long time period. Snow thawing periods were detected and maximum of snow melting intensity for events with different intensity (1day; 2 days; 4 days; 7 days; 10 days) were calculated. According to the occurrence probability six scenarios for each event for nowadays, near and far future with return period once in 5, 10, 20, 50, 100 and 200 years were constructed based on the Gumbell extreme value analysis. The hydrological modelling driven by the temperature and precipitation data series from regional climate models were used for evaluation of rain event maximums in the future periods. The usage of the climate model data in hydrological models causes systematic errors; therefore the bias correction method (Sennikovs, Bethers, 2009) was applied for determination of the future rainfall intensities. SWMM model was built for the urban area. Objects of hydraulic importance (manifold, penstock, ditch, pumping station, weir, well, catchment sub-basin etc.) were included in the model. There exist pure rain sewage system and mixed rain-water/household sewage system in Riga. Sewage system with wastewater load proportional to population density was taken account and calibrated. Model system was calibrated for a real rain event against the water flux time series into sewage treatment plant of Riga. High resolution (~1.5 points per square meter) digital terrain map was used as the base for finite element mesh for the geospatial mapping of results of hydraulic calculations. Main results of study are (1) detection of the hot spots of densely populated urban areas; (2) identification of the weak chains of the melioration and sewage systems; (3) mapping the elevation of ground water mainly caused by snow melting. A.Piliksere, A.Valainis, J.Seņņikovs, (2011), A flood risk assessment for Riga city taking account climate changes, EGU, Vienna, Austria. EPA, (2004), Storm water management model. User's manual version 5.0. US Environmental Protection Agency J.Sennikovs, U.Bethers, (2009), Statistical downscaling method of regional climate model results for hydrological modelling. 18th World IMACS/MODSIM Congress, Cairns, Australia.

Impacts of Green Infrastructure on the Water Budget and Other Ecosystem Services in Subhumid Urban Areas

NASA Astrophysics Data System (ADS)

Feng, Y.; Burian, S. J.; Pardyjak, E.; Pomeroy, C. A.

2014-12-01

Green infrastructure (GI) measures have been well established as part of low-impact development approaches for stormwater (SW) management. The origin of the concepts, practices and the preponderance of research have taken place in humid climates. Recent work has begun to explore and adapt GI to subhumid and semi-arid climates, which experience warmer and drier periods. But much remains unknown about effects of GI on the water cycle and how to effectively implement to maximize ecosystem benefits. This research synthesizes observation and modeling to address questions related to changes in evapotranspiration (ET), SW runoff volume, and other water cycle processes from GI introduction in Salt Lake City, Utah, USA. First, the water budget of green roofs is being studied via weighing lysimeter systems on two rooftop gardens on the University of Utah campus. ET, outflow, and soil moisture have been measured for approximately one year. Up to this early summer, average ET rates for lysimeters of pure medium, Sedums, and Bluegrass are 1.85±1.01, 1.97±0.94, and 2.31±0.91 mm/d respectively; the maximum ET rate could reach 6.11 mm/d from Sedums. Over 2/3 of total rainfall and irrigation were slowly consumed via ET from green roof. Second, the observation studies are leading to new ET modeling techniques that are being incorporated into the U.S. EPA Storm Water Management Model (SWMM). The modified SWMM has been used to simulate ET, SW runoff volume, and overall water budget changes from GI implementation. Preliminary result shows that ET could account for 10% of the total inflows into bioretentions, and 25% of the inflows into landscapes; potential ET rates could vary up to 0.95 mm/hr across 53 subcatchments in the 29 acres catchment. The influence of various design factors for GI on SW runoff reduction and the water budget is also to be estimated. The application of the research is to analyze the water budget of the Red Butte Creek Watershed in Salt Lake City and to explore the necessary GI elements to approach pre-development water budget conditions.

The influence of synthetic hyetograph parameters on simulation results of runoff from urban catchment

NASA Astrophysics Data System (ADS)

Mazurkiewicz, Karolina; Skotnicki, Marcin

2018-02-01

The paper presents the results of analysis of the influence of the maximum intensity (peak) location in the synthetic hyetograph and rainfall duration on the maximum outflow from urban catchment. For the calculation Chicago hyetographs with a duration from 15 minutes to 180 minutes and peak location between 20% and 50% of the total rainfall duration were design. Runoff simulation was performed using the SWMM5 program for three models of urban catchment with area from 0.9 km2 to 6.7 km2. It was found that the increase in the rainfall peak location causes the increase in the maximum outflow up to 17%. For a given catchment the greatest maximum outflow is generated by the rainfall, which time to peak corresponds to the flow time through the catchment. Presented results may be useful for choosing the rainfall parameters for storm sewer systems modeling.

Analysis and Comparison on the Flood Simulation in Typical Hilly & Semi-mountainous Region

NASA Astrophysics Data System (ADS)

Luan, Qinghua; Wang, Dong; Zhang, Xiang; Liu, Jiahong; Fu, Xiaoran; Zhang, Kun; Ma, Jun

2017-12-01

Water-logging and flood are both serious in hilly and semi-mountainous cities of China, but the related research is rare. Lincheng Economic Development Zone (EDZ) in Hebei Province as the typical city was selected and storm water management model (SWMM) was applied for flood simulation in this study. The regional model was constructed through calibrating and verifying the runoff coefficient of different flood processes. Different designed runoff processes in five-year, ten-year and twenty-year return periods in basic scenario and in the low impact development (LID) scenario, respectively, were simulated and compared. The result shows that: LID measures have effect on peak reduction in the study area, but the effectiveness is not significant; the effectiveness of lagging peak time is poor. These simulation results provide decision support for the rational construction of LID in the study area, and provide the references for regional rain flood management.

The temporal variability of a rainfall synthetic hyetograph for the dimensioning of stormwater retention tanks in small urban catchments

NASA Astrophysics Data System (ADS)

Pochwat, Kamil; Słyś, Daniel; Kordana, Sabina

2017-06-01

The paper presents issues relating to the influence of time distribution of rainfall on the required storage capacity of stormwater reservoirs. The research was based on data derived from simulations of existing drainage systems. The necessary models of catchments and the drainage system were prepared using the hydrodynamic modelling software SWMM 5.0 (Storm Water Management Model). The research results obtained were used to determine the critical rainfall distribution in time which required reserving the highest capacity of stormwater reservoir. In addition, it can be confirmed based on the research that dimensioning of enclosed structures should rely on using the critical precipitation generated as the characteristics of a synthetically developed rainfall vary dynamically in time. In the final part of the paper, the results of the analyses are compared and followed with the ensuing conclusions. The results of the research will have impact on the development of methodologies for dimensioning retention facilities in drainage systems.

Comparative Synthesis of Current and Future Urban Stormwater Runoff Scenarios in Tampa Bay Basin under a Changing Climate

NASA Astrophysics Data System (ADS)

Khan, M.; Abdul-Aziz, O. I.

2016-12-01

Changes in climatic regimes and basin characteristics such as imperviousness, roughness and land use types would lead to potential changes in stormwater budget. In this study we quantified reference sensitivities of stormwater runoff to the potential climatic and land use/cover changes by developing a large-scale, mechanistic rainfall-runoff model for the Tampa Bay Basin of Florida using the US EPA Storm Water Management Model (SWMM 5.1). Key processes of urban hydrology, its dynamic interactions with groundwater and sea level, hydro-climatic variables and land use/cover characteristics were incorporated within the model. The model was calibrated and validated with historical streamflow data. We then computed the historical (1970-2000) and potential 2050s stormwater budgets for the Tampa Bay Basin. Climatic scenario projected by the global climate models (GCMs) and the regional climate models (RCMs), along with sea level and land use/cover projections, were utilized to anticipate the future stormwater budget. The comparative assessment of current and future stormwater scenario will aid a proactive management of stormwater runoff under a changing climate in the Tampa Bay Basin and similar urban basins around the world.

Impacts of channel deposition on the risk of flooding in a watershed

NASA Astrophysics Data System (ADS)

Ting-Yue, Hong; Chia-Ling, Chang

2017-04-01

Taiwan is located in East Asian where is always hit by typhoons. Typhoons usually bring huge amounts of rainfall and result in the problems of channel deposition. Deposition influences the functions of channel and increases the risk of flooding. The Luliao Reservoir Watershed is the case area in this study. It is the major water source for agricultural activity and domestic use. The objective of this study is to assess the possible impacts of channel deposition on the watershed environment. This study applies the Storm Water Management Model (SWMM) to predict the hydrologic responses and evaluate the risk of flooding. The results show that the decrease of cross section induced by deposition in a channel may increase the risk of flooding and impact the safety of watershed environment. Therefore, canal desilting is important in channel regulation. The discussion and analysis can be useful references for channel regulation.

Current and Future Urban Stormwater Flooding Scenarios in the Southeast Florida Coasts

NASA Astrophysics Data System (ADS)

Huq, E.; Abdul-Aziz, O. I.

2016-12-01

This study computed rainfall-fed stormwater flooding under the historical and future reference scenarios for the Southeast Coasts Basin of Florida. A large-scale, mechanistic rainfall-runoff model was developed using the U.S. E.P.A. Storm Water Management Model (SWMM 5.1). The model parameterized important processes of urban hydrology, groundwater, and sea level, while including hydroclimatological variables and land use features. The model was calibrated and validated with historical streamflow data. It was then used to estimate the sensitivity of stormwater runoff to the reference changes in hydroclimatological variables (rainfall and evapotranspiration) and different land use/land cover features (imperviousness, roughness). Furthermore, historical (1970-2000) and potential 2050s stormwater budgets were also estimated for the Florida Southeast Coasts Basin by incorporating climatic projections from different GCMs and RCMs, as well as by using relevant projections of sea level and land use/cover. Comparative synthesis of the historical and future scenarios along with the results of sensitivity analysis can aid in efficient management of stormwater flooding for the southeast Florida coasts and similar urban centers under a changing regime of climate, sea level, land use/cover and hydrology.

Impacts of Changing Climatic Drivers and Land use features on Future Stormwater Runoff in the Northwest Florida Basin: A Large-Scale Hydrologic Modeling Assessment

NASA Astrophysics Data System (ADS)

Khan, M.; Abdul-Aziz, O. I.

2017-12-01

Potential changes in climatic drivers and land cover features can significantly influence the stormwater budget in the Northwest Florida Basin. We investigated the hydro-climatic and land use sensitivities of stormwater runoff by developing a large-scale process-based rainfall-runoff model for the large basin by using the EPA Storm Water Management Model (SWMM 5.1). Climatic and hydrologic variables, as well as land use/cover features were incorporated into the model to account for the key processes of coastal hydrology and its dynamic interactions with groundwater and sea levels. We calibrated and validated the model by historical daily streamflow observations during 2009-2012 at four major rivers in the basin. Downscaled climatic drivers (precipitation, temperature, solar radiation) projected by twenty GCMs-RCMs under CMIP5, along with the projected future land use/cover features were also incorporated into the model. The basin storm runoff was then simulated for the historical (2000s = 1976-2005) and two future periods (2050s = 2030-2059, and 2080s = 2070-2099). Comparative evaluation of the historical and future scenarios leads to important guidelines for stormwater management in Northwest Florida and similar regions under a changing climate and environment.

The Scale Effects of Engineered Inlets in Urban Hydrologic Processes

NASA Astrophysics Data System (ADS)

Shevade, L.; Montalto, F. A.

2017-12-01

Runoff from urban surfaces is typically captured by engineered inlets for conveyance to receiving water bodies or treatment plants. Normative hydrologic and hydraulic (H&H) modeling tools generally assume 100% efficient inlets, though observations by the authors suggest this assumption is invalid. The discrepancy is key since the more efficiently the inlet, the more linearly hydrologic processes scale with catchment area. Using several years of remote sensing, the observed efficiencies of urban green infrastructure (GI) facility inlets in New York City are presented, as a function of the morphological and climatological properties of their catchments and events. The rainfall-runoff response is modeled with EPA to assess the degree of inaccuracy that the assumption of efficient inlets introduces in block and neighborhood-scale simulations. Next, an algorithm is presented that incorporates inlet efficiency into SWMM and the improved predictive skill evaluated using Nash-Sutcliffe and root-mean-square error (RMSE). The results are used to evaluate the extent to which decentralized green stormwater management facilities positioned at the low points of urban catchments ought to be designed with larger capacities than their counterparts located further upslope.

A new methodology for surcharge risk management in urban areas (case study: Gonbad-e-Kavus city).

PubMed

Hooshyaripor, Farhad; Yazdi, Jafar

2017-02-01

This research presents a simulation-optimization model for urban flood mitigation integrating Non-dominated Sorting Genetic Algorithm (NSGA-II) with Storm Water Management Model (SWMM) hydraulic model under a curve number-based hydrologic model of low impact development technologies in Gonbad-e-Kavus, a small city in the north of Iran. In the developed model, the best performance of the system relies on the optimal layout and capacity of retention ponds over the study area in order to reduce surcharge from the manholes underlying a set of storm event loads, while the available investment plays a restricting role. Thus, there is a multi-objective optimization problem with two conflicting objectives solved successfully by NSGA-II to find a set of optimal solutions known as the Pareto front. In order to analyze the results, a new factor, investment priority index (IPI), is defined which shows the risk of surcharging over the network and priority of the mitigation actions. The IPI is calculated using the probability of pond selection for candidate locations and average depth of the ponds in all Pareto front solutions. The IPI can help the decision makers to arrange a long-term progressive plan with the priority of high-risk areas when an optimal solution has been selected.

Simulating the Response of Urban Water Quality to Climate and Land Use Change in Partially Urbanized Basins

NASA Astrophysics Data System (ADS)

Sun, N.; Yearsley, J. R.; Nijssen, B.; Lettenmaier, D. P.

2014-12-01

Urban stream quality is particularly susceptible to extreme precipitation events and land use change. Although the projected effects of extreme events and land use change on hydrology have been resonably well studied, the impacts on urban water quality have not been widely examined due in part to the scale mismatch between global climate models and the spatial scales required to represent urban hydrology and water quality signals. Here we describe a grid-based modeling system that integrates the Distributed Hydrology Soil Vegetation Model (DHSVM) and urban water quality module adpated from EPA's Storm Water Management Model (SWMM) and Soil and water assessment tool (SWAT). Using the model system, we evaluate, for four partially urbanized catchments within the Puget Sound basin, urban water quality under current climate conditions, and projected potential changes in urban water quality associated with future changes in climate and land use. We examine in particular total suspended solids, toal nitrogen, total phosphorous, and coliform bacteria, with catchment representations at the 150-meter spatial resolution and the sub-daily timestep. We report long-term streamflow and water quality predictions in response to extreme precipitation events of varying magnitudes in the four partially urbanized catchments. Our simulations show that urban water quality is highly sensitive to both climatic and land use change.

NASA's Potential Contributions for Remediation of Retention Ponds Using Solar Ultraviolet Radiation and Photocatalysis

NASA Technical Reports Server (NTRS)

Underwood, Lauren W.; Ryan, Robert E.

2007-01-01

This Candidate Solution uses NASA Earth science research on atmospheric ozone and aerosols data (1) to help improve the prediction capabilities of water runoff models that are used to estimate runoff pollution from retention ponds, and (2) to understand the pollutant removal contribution and potential of photocatalytically coated materials that could be used in these ponds. Models (the EPA's SWMM and the USGS SLAMM) exist that estimate the release of pollutants into the environment from storm-water-related retention pond runoff. UV irradiance data acquired from the satellite mission Aura and from the OMI Surface UV algorithm will be incorporated into these models to enhance their capabilities, not only by increasing the general understanding of retention pond function (both the efficacy and efficiency) but additionally by adding photocatalytic materials to these retention ponds, augmenting their performance. State and local officials who run pollution protection programs could then develop and implement photocatalytic technologies for water pollution control in retention ponds and use them in conjunction with existing runoff models. More effective decisions about water pollution protection programs could be made, the persistence and toxicity of waste generated could be minimized, and subsequently our natural water resources would be improved. This Candidate Solution is in alignment with the Water Management and Public Health National Applications.

Impacts of Changing Climate, Hydrology and Land Use on the Stormwater Runoff of Urbanizing Central Florida

NASA Astrophysics Data System (ADS)

Huq, E.; Abdul-Aziz, O. I.

2017-12-01

We computed the historical and future storm runoff scenarios for the Shingle Creek Basin, including the growing urban centers of central Florida (e.g., City of Orlando). Storm Water Management Model (SWMM 5.1) of US EPA was used to develop a mechanistic hydrologic model for the basin by incorporating components of urban hydrology, hydroclimatological variables, and land use/cover features. The model was calibrated and validated with historical streamflow of 2004-2013 near the outlet of the Shingle Creek. The calibrated model was used to compute the sensitivities of stormwater budget to reference changes in hydroclimatological variables (rainfall and evapotranspiration) and land use/cover features (imperviousness, roughness). Basin stormwater budgets for the historical (2010s = 2004-2013) and future periods (2050s = 2030-2059; 2080s = 2070-2099) were also computed based on downscaled climatic projections of 20 GCMs-RCMs representing the coupled model intercomparison project (CMIP5), and anticipated changes in land use/cover. The sensitivity analyses indicated the dominant drivers of urban runoff in the basin. Comparative assessment of the historical and future stormwater runoff scenarios helped to locate basin areas that would be at a higher risk of future stormwater flooding. Importance of the study lies in providing valuable guidelines for managing stormwater flooding in central Florida and similar growing urban centers around the world.

Strategy for introduction of rainwater management facility considering rainfall event applied on new apartment complex

NASA Astrophysics Data System (ADS)

KIM, H.; Lee, D. K.; Yoo, S.

2014-12-01

As regional torrential rains become frequent due to climate change, urban flooding happens very often. That is why it is necessary to prepare for integrated measures against a wide range of rainfall. This study proposes introduction of effective rainwater management facilities to maximize the rainwater runoff reductions and recover natural water circulation for unpredictable extreme rainfall in apartment complex scale. The study site is new apartment complex in Hanam located in east of Seoul, Korea. It has an area of 7.28ha and is analysed using the EPA-SWMM and STORM model. First, it is analyzed that green infrastructure(GI) had efficiency of flood reduction at the various rainfall events and soil characteristics, and then the most effective value of variables are derived. In case of rainfall event, Last 10 years data of 15 minutes were used for analysis. A comparison between A(686mm rainfall during 22days) and B(661mm/4days) knew that soil infiltration of A is 17.08% and B is 5.48% of the rainfall. Reduction of runoff after introduction of the GI of A is 24.76% and B is 6.56%. These results mean that GI is effective to small rainfall intensity, and artificial rainwater retarding reservoir is needed at extreme rainfall. Second, set of target year is conducted for the recovery of hydrological cycle at the predevelopment. And an amount of infiltration, evaporation, surface runoff of the target year and now is analysed on the basis of land coverage, and an arrangement of LID facilities. Third, rainwater management scenarios are established and simulated by the SWMM-LID. Rainwater management facilities include GI(green roof, porous pavement, vegetative swale, ecological pond, and raingarden), and artificial rainwater. Design scenarios are categorized five type: 1)no GI, 2)conventional GI design(current design), 3)intensive GI design, 4)GI design+rainwater retarding reservoir 5)maximized rainwater retarding reservoir. Intensive GI design is to have attribute value to obtain the maximum efficiency for each GI facility with in-depth experts interviews. Climate change scenario is also used to set the capacity of the rainwater management facilities considering the extreme precipitation. These all scenarios are not only simulated for calculating the hydrological balance but analysed the cost for each scenarios effect.

Development of urban runoff model FFC-QUAL for first-flush water-quality analysis in urban drainage basins.

PubMed

Hur, Sungchul; Nam, Kisung; Kim, Jungsoo; Kwak, Changjae

2018-01-01

An urban runoff model that is able to compute the runoff, the pollutant loadings, and the concentrations of water-quality constituents in urban drainages during the first flush was developed. This model, which is referred to as FFC-QUAL, was modified from the existing ILLUDAS model and added for use during the water-quality analysis process for dry and rainy periods. For the dry period, the specifications of the coefficients for the discharge and water quality were used. During rainfall, we used the Clark and time-area methods for the runoff analyses of pervious and impervious areas to consider the effects of the subbasin shape; moreover, four pollutant accumulation methods and the washoff equation for computing the water quality each time were used. According to the verification results, FFC-QUAL provides generally similar output as the measured data for the peak flow, total runoff volume, total loadings, peak concentration, and time of peak concentration for three rainfall events in the Gunja subbasin. In comparison with the ILLUDAS, SWMM, and MOUSE models, there is little difference between these models and the model developed in this study. The proposed model should be useful in urban watersheds because of its simplicity and its capacity to model common pollutants (e.g., biological oxygen demand, chemical oxygen demand, Escherichia coli, suspended solids, and total nitrogen and phosphorous) in runoff. The proposed model can also be used in design studies to determine how changes in infrastructure will affect the runoff and pollution loads. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

Estimation of urban runoff and water quality using remote sensing and artificial intelligence.

PubMed

Ha, S R; Park, S Y; Park, D H

2003-01-01

Water quality and quantity of runoff are strongly dependent on the landuse and landcover (LULC) criteria. In this study, we developed a more improved parameter estimation procedure for the environmental model using remote sensing (RS) and artificial intelligence (AI) techniques. Landsat TM multi-band (7bands) and Korea Multi-Purpose Satellite (KOMPSAT) panchromatic data were selected for input data processing. We employed two kinds of artificial intelligence techniques, RBF-NN (radial-basis-function neural network) and ANN (artificial neural network), to classify LULC of the study area. A bootstrap resampling method, a statistical technique, was employed to generate the confidence intervals and distribution of the unit load. SWMM was used to simulate the urban runoff and water quality and applied to the study watershed. The condition of urban flow and non-point contaminations was simulated with rainfall-runoff and measured water quality data. The estimated total runoff, peak time, and pollutant generation varied considerably according to the classification accuracy and percentile unit load applied. The proposed procedure would efficiently be applied to water quality and runoff simulation in a rapidly changing urban area.

Drainage network optimization for inundation mitigation case study of ITS Surabaya

NASA Astrophysics Data System (ADS)

Savitri, Yang Ratri; Lasminto, Umboro

2017-06-01

Institut Teknologi Sepuluh Nopember (ITS) Surabaya is one of engineering campus in Surabaya with an area of ± 187 ha, which consists of building and campus facilities. The campus is supported by drainage system planned according to the ITS Master Plan on 2002. The drainage system is planned with numbers of retention and detention pond based on the city concept of Zero Delta Q concept. However, in the rainy season, it frequently has inundation problems in several locations. The problems could be identified from two major sources, namely the internal campus facilities and external condition connected with the city drainage system. This paper described the capabilities of drainage network optimization to mitigate local urban drainage problem. The hydrology-hydraulic investigation was done by utilizing the Storm Water Management Model (SWMM) developed by US Environmental Protection Agency (EPA). The mitigation is based on several alternative that based on the existing condition and regarding the social problem. The study results showed that the management of the flow from external source could reduce final stored volume of the campus main channel by 31.75 %.

Modelling and optimization of land use/land cover change in a developing urban catchment.

PubMed

Xu, Ping; Gao, Fei; He, Junchao; Ren, Xinxin; Xi, Weijin

2017-06-01

The impacts of land use/cover change (LUCC) on hydrological processes and water resources are mainly reflected in changes in runoff and pollutant variations. Low impact development (LID) technology is utilized as an effective strategy to control urban stormwater runoff and pollution in the urban catchment. In this study, the impact of LUCC on runoff and pollutants in an urbanizing catchment of Guang-Ming New District in Shenzhen, China, were quantified using a dynamic rainfall-runoff model with the EPA Storm Water Management Model (SWMM). Based on the simulations and observations, the main objectives of this study were: (1) to evaluate the catchment runoff and pollutant variations with LUCC, (2) to select and optimize the appropriate layout of LID in a planning scenario for reducing the growth of runoff and pollutants under LUCC, (3) to assess the optimal planning schemes for land use/cover. The results showed that compared to 2013, the runoff volume, peak flow and pollution load of suspended solids (SS), and chemical oxygen demand increased by 35.1%, 33.6% and 248.5%, and 54.5% respectively in a traditional planning scenario. The assessment result of optimal planning of land use showed that annual rainfall control of land use for an optimal planning scenario with LID technology was 65%, and SS pollutant load reduction efficiency 65.6%.

Assessing Receiving Water Quality Impacts due to Flow Path Alteration in Residential Catchments, using the Stormwater and Wastewater Management Model

NASA Astrophysics Data System (ADS)

Wolosoff, S. E.; Duncan, J.; Endreny, T.

2001-05-01

The Croton water supply system, responsible for supplying approximately 10% of New York City's water, provides an opportunity for exploration into the impacts of significant terrestrial flow path alteration upon receiving water quality. Natural flow paths are altered during residential development in order to allow for construction at a given location, reductions in water table elevation in low lying areas and to provide drainage of increased overland flow volumes. Runoff conducted through an artificial drainage system, is prevented from being attenuated by the natural environment, thus the pollutant removal capacity inherent in most natural catchments is often limited to areas where flow paths are not altered by development. By contrasting the impacts of flow path alterations in two small catchments in the Croton system, with different densities of residential development, we can begin to identify appropriate limits to the re-routing of runoff in catchments draining into surface water supplies. The Stormwater and Wastewater Management Model (SWMM) will be used as a tool to predict the runoff quantity and quality generated from two small residential catchments and to simulate the potential benefits of changes to the existing drainage system design, which may improve water quality due to longer residence times.

Road traffic impact on urban water quality: a step towards integrated traffic, air and stormwater modelling.

PubMed

Fallah Shorshani, Masoud; Bonhomme, Céline; Petrucci, Guido; André, Michel; Seigneur, Christian

2014-04-01

Methods for simulating air pollution due to road traffic and the associated effects on stormwater runoff quality in an urban environment are examined with particular emphasis on the integration of the various simulation models into a consistent modelling chain. To that end, the models for traffic, pollutant emissions, atmospheric dispersion and deposition, and stormwater contamination are reviewed. The present study focuses on the implementation of a modelling chain for an actual urban case study, which is the contamination of water runoff by cadmium (Cd), lead (Pb), and zinc (Zn) in the Grigny urban catchment near Paris, France. First, traffic emissions are calculated with traffic inputs using the COPERT4 methodology. Next, the atmospheric dispersion of pollutants is simulated with the Polyphemus line source model and pollutant deposition fluxes in different subcatchment areas are calculated. Finally, the SWMM water quantity and quality model is used to estimate the concentrations of pollutants in stormwater runoff. The simulation results are compared to mass flow rates and concentrations of Cd, Pb and Zn measured at the catchment outlet. The contribution of local traffic to stormwater contamination is estimated to be significant for Pb and, to a lesser extent, for Zn and Cd; however, Pb is most likely overestimated due to outdated emissions factors. The results demonstrate the importance of treating distributed traffic emissions from major roadways explicitly since the impact of these sources on concentrations in the catchment outlet is underestimated when those traffic emissions are spatially averaged over the catchment area.

Predicting the Effect of Changing Precipitation Extremes and Land Cover Change on Urban Water Quality

NASA Astrophysics Data System (ADS)

SUN, N.; Yearsley, J. R.; Lettenmaier, D. P.

2013-12-01

Recent research shows that precipitation extremes in many of the largest U.S. urban areas have increased over the last 60 years. These changes have important implications for stormwater runoff and water quality, which in urban areas are dominated by the most extreme precipitation events. We assess the potential implications of changes in extreme precipitation and changing land cover in urban and urbanizing watersheds at the regional scale using a combination of hydrology and water quality models. Specifically, we describe the integration of a spatially distributed hydrological model - the Distributed Hydrology Soil Vegetation Model (DHSVM), the urban water quality model in EPA's Storm Water Management Model (SWMM), the semi-Lagrangian stream temperature model RBM10, and dynamical and statistical downscaling methods applied to global climate predictions. Key output water quality parameters include total suspended solids (TSS), toal nitrogen, total phosphorous, fecal coliform bacteria and stream temperature. We have evaluated the performance of the modeling system in the highly urbanized Mercer Creek watershed in the rapidly growing Bellevue urban area in WA, USA. The results suggest that the model is able to (1) produce reasonable streamflow predictions at fine temporal and spatial scales; (2) provide spatially distributed water temperature predictions that mostly agree with observations throughout a complex stream network, and characterize impacts of climate, landscape, near-stream vegetation change on stream temperature at local and regional scales; and (3) capture plausibly the response of water quality constituents to varying magnitude of precipitation events in urban environments. Next we will extend the scope of the study from the Mercer Creek watershed to include the entire Puget Sound Basin, WA, USA.

Identifying strategic sites for Green-Infrastructures (GI) to manage stormwater in a miscellaneous use urban African watershed

NASA Astrophysics Data System (ADS)

Selker, J. S.; Kahsai, S. K.

2017-12-01

Green Infrastructure (GI) or Low impact development (LID), is a land use planning and design approach with the objective of mitigating land development impacts to the environment, and is ever more looked to as a way to lessen runoff and pollutant loading to receiving water bodies. Broad-scale approaches for siting GI/LID have been developed for agricultural watersheds, but are rare for urban watersheds, largely due to greater land use complexity. And it is even more challenging when it comes to Urban Africa due to the combination of poor data quality, rapid and unplanned development, and civic institutions unable to reliably carry out regular maintenance. We present a spacio-temporal simulation-based approach to identify an optimal prioritization of sites for GI/LID based on DEM, land use and land cover. Optimization used is a multi-objective optimization tool along with an urban storm water management model (SWMM) to identify the most cost-effective combination of LID/GI. This was applied to an urban watershed in NW Kampala, Lubigi Catchment (notorious for being heavily flooded every year), with a miscellaneous use watershed in Uganda, as a case-study to demonstrate the approach.

Combined sewer overflow control with LID based on SWMM: an example in Shanghai, China.

PubMed

Liao, Z L; Zhang, G Q; Wu, Z H; He, Y; Chen, H

2015-01-01

Although low impact development (LID) has been commonly applied across the developed countries for mitigating the negative impacts of combined sewer overflows (CSOs) on urban hydrological environment, it has not been widely used in developing countries yet. In this paper, a typical combined sewer system in an urbanized area of Shanghai, China was used to demonstrate how to design and choose CSO control solutions with LID using stormwater management model. We constructed and simulated three types of CSO control scenarios. Our findings support the notion that LID measures possess favorable capability on CSO reduction. Nevertheless, the green scenarios which are completely comprised by LID measures fail to achieve the maximal effectiveness on CSO reduction, while the gray-green scenarios (LID measure combined with gray measures) achieve it. The unit cost-effectiveness of each type of scenario sorts as: green scenario > gray-green scenario > gray scenario. Actually, as the storage tank is built in the case catchment, a complete application of green scenario is inaccessible here. Through comprehensive evaluation and comparison, the gray-green scenario F which used the combination of storage tank, bio-retention and rain barrels is considered as the most feasible one in this case.

Quantifying nonpoint source emissions and their water quality responses in a complex catchment: A case study of a typical urban-rural mixed catchment

NASA Astrophysics Data System (ADS)

Chen, Lei; Dai, Ying; Zhi, Xiaosha; Xie, Hui; Shen, Zhenyao

2018-04-01

As two key threats to receiving water bodies, the generation mechanisms and processes of urban and agricultural nonpoint sources (NPSs) show clear differences, which lead to distinct characteristics of water quality responses with mixed land-uses catchments compared to single land-use ones. However, few studies have provided such insights in these characteristic or quantified different water environment responses to NPS pollution. In this study, an integrated modelling approach was developed for those complex catchments by combining three commonly used models: SWMM (Storm Water Management Model), SWAT (Soil and Water Assessment Tool) and MIKE 11. A case study was performed in a typical urban-rural catchment of Chao Lake, China. The simulated results indicated that urban NPS pollution responded sensitively to rainfall events and was greatly affected by the antecedent dry days. Compare to urban NPS, agricultural NPS pollution was characterized with the time-lag to rainfall depended on soil moisture and the post-rain-season emissions carried by lateral flows, and were also affected by the local farm-practice schedule. With comprehensive impacts from urban-rural land-uses, the time-interleaved urban and agricultural NPS pollution emissions and more abundant pollution accumulation both led to a decrease in the responsive time and an increase in the frequency of peak pollution concentration values even during the dry season. These obtained characteristics can provide guidance for drafting watershed management plans in similar mixed land use catchments.

The impact of domestic rainwater harvesting systems in storm water runoff mitigation at the urban block scale.

PubMed

Palla, A; Gnecco, I; La Barbera, P

2017-04-15

In the framework of storm water management, Domestic Rainwater Harvesting (DRWH) systems are recently recognized as source control solutions according to LID principles. In order to assess the impact of these systems in storm water runoff control, a simple methodological approach is proposed. The hydrologic-hydraulic modelling is undertaken using EPA SWMM; the DRWH is implemented in the model by using a storage unit linked to the building water supply system and to the drainage network. The proposed methodology has been implemented for a residential urban block located in Genoa (Italy). Continuous simulations are performed by using the high-resolution rainfall data series for the ''do nothing'' and DRWH scenarios. The latter includes the installation of a DRWH system for each building of the urban block. Referring to the test site, the peak and volume reduction rate evaluated for the 2125 rainfall events are respectively equal to 33 and 26 percent, on average (with maximum values of 65 percent for peak and 51 percent for volume). In general, the adopted methodology indicates that the hydrologic performance of the storm water drainage network equipped with DRWH systems is noticeable even for the design storm event (T = 10 years) and the rainfall depth seems to affect the hydrologic performance at least when the total depth exceeds 20 mm. Copyright © 2017 Elsevier Ltd. All rights reserved.

Study of flood defense structural measures priorities using Compromise Programming technique

NASA Astrophysics Data System (ADS)

Lim, D.; Jeong, S.

2017-12-01

Recent climate change of global warming has led to the frequent occurrence of heavy regional rainfalls. As such, inundation vulnerability increases in urban areas with high population density due to the low runoff carrying capacity. This study selects a sample area (Janghang-eup, the Republic of Korea), which is one of the most vulnerable areas to flooding, analyzing the urban flood runoff model (XP-SWMM) and using the MCDM (Multi-Criteria Decision Making) technique to establish flood protection structural measures. To this end, we compare the alternatives and choose the optimal flood defense measure: our model is utilized with three flood prevention structural measures; (i) drainage pipe construction; (ii) water detention; and (iii) flood pumping station. Dividing the target area into three small basins, we propose flood evaluations for an inundation decrease by studying the flooded area, the maximum inundation depth, the damaged residential area, and the construction cost. In addition, Compromise Programming determines the priority of the alternatives. As a consequent, this study suggests flood pumping station for Zone 1 and drainage pipe construction for Zone 2 and Zone 3, respectively, as the optimal flood defense alternative. Keywords : MCDM; Compromise Programming; Urban Flood Prevention; This research was supported by a grant [MPSS-DP-2013-62] through the Disaster and Safety Management Institute funded by Ministry of Public Safety and Security of Korean government.

Scenario-based projections of future urban inundation within a coupled hydrodynamic model framework: A case study in Dongguan City, China

NASA Astrophysics Data System (ADS)

Wu, Xushu; Wang, Zhaoli; Guo, Shenglian; Liao, Weilin; Zeng, Zhaoyang; Chen, Xiaohong

2017-04-01

One major threat to cities at present is the increased inundation hazards owing to changes in climate and accelerated human activity. Future evolution of urban inundation is still an unsolved issue, given large uncertainties in future environmental conditions within urbanized areas. Developing model techniques and urban inundation projections are essential for inundation management. In this paper, we proposed a 2D hydrodynamic inundation model by coupling SWMM and LISFLOOD-FP models, and revealed how future urban inundation would evolve for different storms, sea level rise and subsidence scenarios based on the developed model. The Shiqiao Creek District (SCD) in Dongguan City was used as the case study. The model ability was validated against the June 13th, 2008 inundation event, which occurred in SCD, and proved capable of simulating dynamic urban inundation. Scenario analyses revealed a high degree of consistency in the inundation patterns among different storms, with larger magnitudes corresponding to greater return periods. Inundations across SCD generally vary as a function of storm intensity, but for lowlands or regions without drainage facilities inundations tend to aggravate over time. In riverfronts, inundations would exacerbate with sea level rise or subsidence; however, the inland inundations are seemingly insensitive to both factors. For the combined scenario of 100-yr storm, 0.5 m subsidence and 0.7 m sea level rise, the riverside inundations would occur much in advance, whilst catastrophic inundations sweep across SCD. Furthermore, the optimal low-impact development found for this case study includes 0.2 km2 of permeable pavements, 0.1 km2 of rain barrels and 0.7 km2 of green roofs.

Predicting Fecal Indicator Bacteria Fate and Removal in Urban Stormwater at the Watershed Scale

NASA Astrophysics Data System (ADS)

Wolfand, J.; Hogue, T. S.; Luthy, R. G.

2016-12-01

Urban stormwater is a major cause of water quality impairment, resulting in surface waters that fail to meet water quality standards and support their designated uses. Of the many stormwater pollutants, fecal indicator bacteria are particularly important to track because they are directly linked to pathogens which jeopardize public health; yet, their fate and transport in urban stormwater is poorly understood. Monitoring fecal bacteria in stormwater is possible, but due to the high variability of fecal indicators both spatially and temporally, single grab or composite samples do not fully capture fecal indicator loading. Models have been developed to predict fecal indicator bacteria at the watershed scale, but they are often limited to agricultural areas, or areas that receive frequent rainfall. Further, it is unclear whether best management practices (BMPs), such as bioretention or engineered wetlands, are able to reduce bacteria to meet water quality standards at watershed outlets. This research seeks to develop a model to predict fecal indicator bacteria in urban stormwater in a semi-arid climate at the watershed scale. Using the highly developed Ballona Creek watershed (89 mi2) located in Los Angeles County as a case study, several existing mechanistic models are coupled with a hydrologic model to predict fecal indicator concentrations (E. coli, enterococci, fecal coliform, and total coliform) at the outfall of Ballona Creek watershed, Santa Monica Bay. The hydrologic model was developed using InfoSWMM Sustain, calibrated for flow from WY 1998-2006 (NSE = 0.94; R2 = 0.95), and validated from WY 2007-2015 (NSE = 0.93; R2 = 0.95). The developed coupled model is being used to predict fecal indicator fate and transport and evaluate how BMPs can be optimized to reduce fecal indicator loading to surface waters and recreational beaches.

Development of Urban Inundation Warning Model at Cyclic Artificial Water Way in Song-do International City, Republic of Korea

NASA Astrophysics Data System (ADS)

Lee, T.; Lee, C.; Kim, H.

2016-12-01

Abstract Song-do international city was constructed by reclaiming land from the coastal waters of Yeonsu-gu, Incheon Metropolitan City, Republic of Korea. The □-shaped cyclic artificial water way has been considered for improving water quality, waterfront and internal drainage in Song-do international city. By improving water quality, various marine facilities, such as marina, artificial beach, marine terminal, and so on, will be set up around the artificial water way for the waterfront. Since the water stage of the artificial water way changes depending on water gates operations, it is necessary to develop an urban inundation warning model to evaluate safeties of the waterfront facilities and its passengers. By considering characteristics of urban watershed, we calculate discharge flowing into the water way using XP-SWMM model. As a result of estimating 100-year flood frequency, although there are slight differences in drainage sections, the maximum flood discharge occurs in 90-min rainfall duration. In order to consider impacts of tide and hydraulic structure, we establish Inland drainage plans through the analysis of unsteady flow using HEC-RAS. The urban inundation warning model is configured to issue a warning when the water plain elevation exceeds EL. 1.5m which is usually managed at EL. 1.0m. In this study, the design flood stage of artificial water way and urban inundation warning model are developed for Song-do international city, and therefore it is expected that a reliability of management and operation of the waterfront facilities is improved. Keywords : Artificial Water Way; Waterfront; Urban Inundation Warning Model. Acknowlegement This research was supported by a grant [MPSS-NH-2015-79] through the Disaster and Safety Management Institute funded by Ministry of Public Safety and Security of Korean government.

Predicting Bacteria Removal by Enhanced Stormwater Control Measures (SCMs) at the Watershed Scale

NASA Astrophysics Data System (ADS)

Wolfand, J.; Bell, C. D.; Boehm, A. B.; Hogue, T. S.; Luthy, R. G.

2017-12-01

Urban stormwater is a major cause of water quality impairment, resulting in surface waters that fail to meet water quality standards and support their designated uses. Fecal indicator bacteria are present in high concentrations in stormwater and are strictly regulated in receiving waters; yet, their fate and transport in urban stormwater is poorly understood. Stormwater control measures (SCMs) are often used to treat, infiltrate, and release urban runoff, but field measurements show that the removal of bacteria by these structural solutions is limited (median log removal = 0.24, n = 370). Researchers have therefore looked to improve bacterial removal by enhancing SCMs through alterations in flow regimes or adding geomedia such as biochar. The present research seeks to develop a model to predict removal of fecal indicator bacteria by enhanced SCMs at the watershed scale in a semi-arid climate. Using the highly developed Ballona Creek watershed (290 km2) located in Los Angeles County as a case study, a hydrologic model is coupled with a stochastic water quality model to predict E. coli concentration near the outfall of the Ballona Creek, Santa Monica Bay. A hydrologic model was developed using EPA SWMM, calibrated for flow from water year 1998-2006 (NSE = 0.94; R2 = 0.94), and validated from water year 2007-2015 (NSE = 0.90; R2 = 0.93). This bacterial loading model was then linked to EPA SUSTAIN and a SCM bacterial removal script to simulate log removal of bacteria by various SCMs and predict bacterial concentrations in Ballona Creek. Preliminary results suggest small enhancements to SCMs that improve bacterial removal (<0.5 log removal) may offer large benefits to surface water quality and enable communities such as Los Angeles to meet their regulatory requirements.

Hydrologic, Social, and Economic Efficacy of Green Infrastructure Credit Programs: Toward Citizen Stormwater Management

NASA Astrophysics Data System (ADS)

Green, O. O.; Kertesz, R.; Rossman, L.; Shuster, W.

2013-12-01

Fostering 'citizen stormwater management', whereby citizens make stormwater management a part of their everyday lives, aims to improve the resilience of the urban water social-ecological system by reducing the load on the stormwater collection system through investment in natural and social capitals. A popular method of incentivizing citizen stormwater management is offering stormwater fee discounts as credits for the installation of green infrastructure onsite. Such installations, in effect, reduce the amount of impervious area by disconnecting them from the sewer system. We analyze 4 such programs (Portland OR, Cleveland OH, Fort Myers FL, and Lynchburg VA) which offer discounts to single family residences for installing rain gardens or bioinfiltration features. Findings indicate large variability in the hydrological, social, and economic efficacy of these programs. We assessed hydrologic efficacy using the Environmental Protection Agency's recently released Stormwater Calculator, a user-friendly model based on SWMM. Hydrologic efficacy was most sensitive to level of detail in administrative rules (i.e., specifics pertaining to soil drainage, slope), regional conditions (e.g., precipitation) and local conditions (e.g., soil, percent of impervious area treated). Social efficacy was measured by the accessibility of the programs to average citizens and varied from highly accessible programs, whereby municipalities had sufficient outreach efforts such that average residents could install their own green infrastructure, to programs with no outreach and contradictory rules which would require a professional engineer to navigate the process and install an eligible rain garden. Economic efficiency was largely dependent on the base stormwater fee (i.e., higher baseline bill results in higher discount and thus higher incentive to participate). From the perspective of a homeowner, they may receive a windfall (i.e., % runoff reduced < % discount), yet due to the low baseline fee, the installations will likely never pay for themselves, leading to an economically inefficient result. From the perspective of the municipality, the windfall to the ratepayer may seem inefficient, but compared to alternative methods of runoff reduction, that windfall may be the most cost efficient alternative. This is especially true considering the social benefits of offering credits to residential ratepayers and the goodwill such a program fosters toward often contentious stormwater fees (e.g., 'rain tax' controversies and related litigation). Such investments in goodwill, even if not hydrologically or economically efficient, may promote the citizen stormwater management model, and thereby promote resilience in the urban water social-ecological system.

Using Automatic Control Approach In Detention Storages For Storm Water Management In An Urban Watershed

NASA Astrophysics Data System (ADS)

Goyal, A.; Yadav, H.; Tyagi, H.; Gosain, A. K.; Khosa, R.

2017-12-01

Increased imperviousness due to rapid urbanization have changed the urban hydrological cycle. As watersheds are urbanized, infiltration and groundwater recharge have decreased, surface runoff hydrograph shows higher peak indicating large volumes of surface runoff in lesser time durations. The ultimate panacea is to reduce the peak of hydrograph or increase the retention time of surface flow. SWMM is widely used hydrologic and hydraulic software which helps to simulate the urban storm water management with the provision to apply different techniques to prevent flooding. A model was setup to simulate the surface runoff and channel flow in a small urban catchment. It provides the temporal and spatial information of flooding in a catchment. Incorporating the detention storages in the drainage network helps achieve reduced flooding. Detention storages provided with predefined algorithms were for controlling the pluvial flooding in urban watersheds. The algorithm based on control theory, automated the functioning of detention storages ensuring that the storages become active on occurrence of flood in the storm water drains and shuts down when flooding is over. Detention storages can be implemented either at source or at several downstream control points. The proposed piece of work helps to mitigate the wastage of rainfall water, achieve desirable groundwater and attain a controlled urban storm water management system.

Simulation of the hydraulic performance of highway filter drains through laboratory models and stormwater management tools.

PubMed

Sañudo-Fontaneda, Luis A; Jato-Espino, Daniel; Lashford, Craig; Coupe, Stephen J

2017-05-23

Road drainage is one of the most relevant assets in transport infrastructure due to its inherent influence on traffic management and road safety. Highway filter drains (HFDs), also known as "French Drains", are the main drainage system currently in use in the UK, throughout 7000 km of its strategic road network. Despite being a widespread technique across the whole country, little research has been completed on their design considerations and their subsequent impact on their hydraulic performance, representing a gap in the field. Laboratory experiments have been proven to be a reliable indicator for the simulation of the hydraulic performance of stormwater best management practices (BMPs). In addition to this, stormwater management tools (SMT) have been preferentially chosen as a design tool for BMPs by practitioners from all over the world. In this context, this research aims to investigate the hydraulic performance of HFDs by comparing the results from laboratory simulation and two widely used SMT such as the US EPA's stormwater management model (SWMM) and MicroDrainage®. Statistical analyses were applied to a series of rainfall scenarios simulated, showing a high level of accuracy between the results obtained in laboratory and using SMT as indicated by the high and low values of the Nash-Sutcliffe and R 2 coefficients and root-mean-square error (RMSE) reached, which validated the usefulness of SMT to determine the hydraulic performance of HFDs.

Near Real Time Flood Warning System for National Capital Territory of Delhi

NASA Astrophysics Data System (ADS)

Goyal, A.; Yadav, H.; Tyagi, H.; Gosain, A. K.

2017-12-01

Extreme floods are common phenomena during Indian Monsoons. The National Capital Territory area of India, Delhi, frequently experiences fluvial as well as pluvial inundation due to its proximity to river Yamuna and poor functioning of its stormwater drainage system. The urban floods result in severe waterlogging and heavy traffic snarls, bringing life in this megapolis to a halt. The city has witnessed six major floods since 1900 and thus its residents are well conscious of potential flood risks but the city still lacks a flood warning system. The flood related risks can be considerably reduced, if not eliminated, by issuing timely warnings and implementing adaptive measures. Therefore, the present study attempts to develop a web based platform that integrates Web-GIS technology and mathematical simulation modelling to provide an effective and reliable early flood warning service for Delhi. The study makes use of India Metorological Department's Doppler radar-derived near real time rainfall estimates of 15 minutes time step. The developed SWMM model has been validated using information from gauges, monitoring sensors and crowd sourcing techniques and utilises capabilities of cloud computing on server side for fast processing. This study also recommends safe evacuation policy and remedial measures for flooding hotspots as part of flood risk management plan. With heightened risk of floods in fast urbanizing areas, this work becomes highly pertinent as flood warning system with adequate lead time can not only save precious lives but can also substantially reduce flood damages.

Optimal design of green and grey stormwater infrastructure for small urban catchment based on life-cycle cost-effectiveness analysis

NASA Astrophysics Data System (ADS)

Yang, Y.; Chui, T. F. M.

2016-12-01

Green infrastructure (GI) is identified as sustainable and environmentally friendly alternatives to the conventional grey stormwater infrastructure. Commonly used GI (e.g. green roof, bioretention, porous pavement) can provide multifunctional benefits, e.g. mitigation of urban heat island effects, improvements in air quality. Therefore, to optimize the design of GI and grey drainage infrastructure, it is essential to account for their benefits together with the costs. In this study, a comprehensive simulation-optimization modelling framework that considers the economic and hydro-environmental aspects of GI and grey infrastructure for small urban catchment applications is developed. Several modelling tools (i.e., EPA SWMM model, the WERF BMP and LID Whole Life Cycle Cost Modelling Tools) and optimization solvers are coupled together to assess the life-cycle cost-effectiveness of GI and grey infrastructure, and to further develop optimal stormwater drainage solutions. A typical residential lot in New York City is examined as a case study. The life-cycle cost-effectiveness of various GI and grey infrastructure are first examined at different investment levels. The results together with the catchment parameters are then provided to the optimization solvers, to derive the optimal investment and contributing area of each type of the stormwater controls. The relationship between the investment and optimized environmental benefit is found to be nonlinear. The optimized drainage solutions demonstrate that grey infrastructure is preferred at low total investments while more GI should be adopted at high investments. The sensitivity of the optimized solutions to the prices the stormwater controls is evaluated and is found to be highly associated with their utilizations in the base optimization case. The overall simulation-optimization framework can be easily applied to other sites world-wide, and to be further developed into powerful decision support systems.

Comparison Of Downscaled CMIP5 Precipitation Datasets For Projecting Changes In Extreme Precipitation In The San Francisco Bay Area.

NASA Technical Reports Server (NTRS)

Milesi, Cristina; Costa-Cabral, Mariza; Rath, John; Mills, William; Roy, Sujoy; Thrasher, Bridget; Wang, Weile; Chiang, Felicia; Loewenstein, Max; Podolske, James

2014-01-01

Water resource managers planning for the adaptation to future events of extreme precipitation now have access to high resolution downscaled daily projections derived from statistical bias correction and constructed analogs. We also show that along the Pacific Coast the Northern Oscillation Index (NOI) is a reliable predictor of storm likelihood, and therefore a predictor of seasonal precipitation totals and likelihood of extremely intense precipitation. Such time series can be used to project intensity duration curves into the future or input into stormwater models. However, few climate projection studies have explored the impact of the type of downscaling method used on the range and uncertainty of predictions for local flood protection studies. Here we present a study of the future climate flood risk at NASA Ames Research Center, located in South Bay Area, by comparing the range of predictions in extreme precipitation events calculated from three sets of time series downscaled from CMIP5 data: 1) the Bias Correction Constructed Analogs method dataset downscaled to a 1/8 degree grid (12km); 2) the Bias Correction Spatial Disaggregation method downscaled to a 1km grid; 3) a statistical model of extreme daily precipitation events and projected NOI from CMIP5 models. In addition, predicted years of extreme precipitation are used to estimate the risk of overtopping of the retention pond located on the site through simulations of the EPA SWMM hydrologic model. Preliminary results indicate that the intensity of extreme precipitation events is expected to increase and flood the NASA Ames retention pond. The results from these estimations will assist flood protection managers in planning for infrastructure adaptations.

A Neighborhood-Scale Green Infrastructure Retrofit: Experimental Results, Model Simulations, and Resident Perspectives

NASA Astrophysics Data System (ADS)

Jefferson, A.; Avellaneda, P. M.; Jarden, K. M.; Turner, V. K.; Grieser, J.

2016-12-01

Distributed green infrastructure approaches to stormwater management that can be retrofit into existing development are of growing interest, but questions remain about their effectiveness at the watershed-scale. In suburban northeastern Ohio, homeowners on a residential street with 55% impervious surface were given the opportunity for free rain barrels, rain gardens, and bioretention cells. Of 163 parcels, only 22 owners (13.5%) chose to participate, despite intense outreach efforts. After pre-treatment monitoring, 37 rain barrels, 7 rain gardens, and 16 street-side bioretention cells were installed in 2013-2014. Using a paired watershed approach, a reduction in up to 33% of peak flow and 40% of total runoff volume per storm was measured in the storm sewer. Using the monitoring data, a calibrated and validated SWMM model was built to explore the long-term effectiveness of the green infrastructure against a wider range of hydrological conditions. Model results confirm the effectiveness of green infrastructure in reducing surface runoff and increasing infiltration and evaporation. Based on 20 years of historical precipitation data, the model shows that the green infrastructure is capable of reducing flows by >40% at the 1, 2, and 5 year return period, suggesting some resilience to projected increases in precipitation intensity in a changing climate. Further, in this project, more benefit is derived from the street-side bioretention cells than from the rain barrels and gardens that treat rooftop runoff. Substantial hydrological gains were achieved despite low homeowner participation. Surveys indicate that many residents viewed stormwater as the city's problem and had negative perceptions of green infrastructure, despite slightly pro-environment values generally. Overall, this study demonstrates green infrastructure's hydrological effectiveness but raises challenging questions about overcoming social barriers retrofits at the neighborhood scale.

Integrated assessments of green infrastructure for flood mitigation to support robust decision-making for sponge city construction in an urbanized watershed.

PubMed

Mei, Chao; Liu, Jiahong; Wang, Hao; Yang, Zhiyong; Ding, Xiangyi; Shao, Weiwei

2018-10-15

Green Infrastructure (GI) has become increasingly important in urban stormwater management because of the effects of climate change and urbanization. To mitigate severe urban water-related problems, China is implementing GI at the national scale under its Sponge City Program (SCP). The SCP is currently in a pilot period, however, little attention has been paid to the cost-effectiveness of GI implementation in China. In this study, an evaluation framework based on the Storm Water Management Model (SWMM) and life cycle cost analysis (LCCA) was applied to undertake integrated assessments of the development of GI for flood mitigation, to support robust decision making regarding sponge city construction in urbanized watersheds. A baseline scenario and 15 GI scenarios under six design rainfall events with recurrence intervals ranging from 2-100 years were simulated and assessed. Model simulation results confirmed the effectiveness of GI for flood mitigation. Nevertheless, even under the most beneficial scenario, the results showed the hydrological performance of GI was incapable of eliminating flooding. Analysis indicated the bioretention cell (BC) plus vegetated swale (VS) scenario was the most cost-effective GI option for unit investment under all rainfall events. However, regarding the maximum potential of the implementation areas of all GI scenarios, the porous pavement plus BC + VS strategy was considered most reasonable for the study area. Although the optimal combinations are influenced by uncertainties in both the model and the GI parameters, the main trends and key insights derived remain unaffected; therefore, the conclusions are relevant regarding sponge city construction within the study area. Copyright © 2018 Elsevier B.V. All rights reserved.

Assessing the condition of bayous and estuaries: Bayou Chico Gulf of Mexico demonstration study

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickson, K.; Acevedo, M.; Waller, T.

1995-12-31

A demonstration study was conducted in May 1994 on Bayou Chico to assess the utility of various assessment and measurement endpoints in determining the condition of bayous and estuaries. Bayou Chico has water quality problems attributed to its low flushing rate and urban/industrial land use in its watershed. The sampling scheme assessed the within-sampling station and spatial variability of measurement endpoints. Fourteen sampling stations in Bayou Chico and 3 stations in Pensacola Bay were selected based on an intensified EMAP sampling grid. Time and space coordinated sampling was conducted for: sediment contaminants and properties, sediment toxicity, water quality, benthic infauna,more » zooplankton and phytoplankton populations. Fish and crabs were also collected and analyzed for a suite of biomarkers and organic chemical residues. Primary productivity was measured via the light bottle dark bottle oxygen method and via diurnal oxygen measurements made with continuous recording data sondes. Stream sites were evaluated for water and sediment quality, water and sediment toxicity, benthic invertebrates and fish. Watershed analyses included assessment of land use/landcover (via SPOT and TM images), soils, pollution sources (point and non-point) and hydrography. These data were coordinated via an Arc/Info GIS system for display and spatial analysis. 1994 survey data were used to parameterize environmental fate models such as SWMM (Storm Water Management Model), DYNHYD5 (WASP5 hydrodynamics model) and WASP5 (Water Quality Analysis Simulation Program) to make predictions about the dynamics and fate of chemical contaminants in Bayou Chico. This paper will present an overview, and report on the results in regards to within-site and spatial variability in Bayou Chico. Conclusions on the efficacy of the assessment and measurement endpoints in evaluating the condition (health) of Bayou Chico will be presented.« less

Based on user interest level of modeling scenarios and browse content

NASA Astrophysics Data System (ADS)

Zhao, Yang

2017-08-01

User interest modeling is the core of personalized service, taking into account the impact of situational information on user preferences, the user behavior days of financial information. This paper proposes a method of user interest modeling based on scenario information, which is obtained by calculating the similarity of the situation. The user's current scene of the approximate scenario set; on the "user - interest items - scenarios" three-dimensional model using the situation pre-filtering method of dimension reduction processing. View the content of the user interested in the theme, the analysis of the page content to get each topic of interest keywords, based on the level of vector space model user interest. The experimental results show that the user interest model based on the scenario information is within 9% of the user's interest prediction, which is effective.

Towards a Ubiquitous User Model for Profile Sharing and Reuse

PubMed Central

de Lourdes Martinez-Villaseñor, Maria; Gonzalez-Mendoza, Miguel; Hernandez-Gress, Neil

2012-01-01

People interact with systems and applications through several devices and are willing to share information about preferences, interests and characteristics. Social networking profiles, data from advanced sensors attached to personal gadgets, and semantic web technologies such as FOAF and microformats are valuable sources of personal information that could provide a fair understanding of the user, but profile information is scattered over different user models. Some researchers in the ubiquitous user modeling community envision the need to share user model's information from heterogeneous sources. In this paper, we address the syntactic and semantic heterogeneity of user models in order to enable user modeling interoperability. We present a dynamic user profile structure based in Simple Knowledge Organization for the Web (SKOS) to provide knowledge representation for ubiquitous user model. We propose a two-tier matching strategy for concept schemas alignment to enable user modeling interoperability. Our proposal is proved in the application scenario of sharing and reusing data in order to deal with overweight and obesity. PMID:23201995

User modeling for distributed virtual environment intelligent agents

NASA Astrophysics Data System (ADS)

Banks, Sheila B.; Stytz, Martin R.

1999-07-01

This paper emphasizes the requirement for user modeling by presenting the necessary information to motivate the need for and use of user modeling for intelligent agent development. The paper will present information on our current intelligent agent development program, the Symbiotic Information Reasoning and Decision Support (SIRDS) project. We then discuss the areas of intelligent agents and user modeling, which form the foundation of the SIRDS project. Included in the discussion of user modeling are its major components, which are cognitive modeling and behavioral modeling. We next motivate the need for and user of a methodology to develop user models to encompass work within cognitive task analysis. We close the paper by drawing conclusions from our current intelligent agent research project and discuss avenues of future research in the utilization of user modeling for the development of intelligent agents for virtual environments.

Pragmatic User Model Implementation in an Intelligent Help System.

ERIC Educational Resources Information Center

Fernandez-Manjon, Baltasar; Fernandez-Valmayor, Alfredo; Fernandez-Chamizo, Carmen

1998-01-01

Describes Aran, a knowledge-based system designed to help users deal with problems related to Unix operation. Highlights include adaptation to the individual user; user modeling knowledge; stereotypes; content of the individual user model; instantiation, acquisition, and maintenance of the individual model; dynamic acquisition of objective and…

An Open Source Framework for Coupled Hydro-Hydrogeo-Chemical Systems in Catchment Research

NASA Astrophysics Data System (ADS)

Delfs, J.; Sachse, A.; Gayler, S.; Grathwohl, P.; He, W.; Jang, E.; Kalbacher, T.; Klein, C.; Kolditz, O.; Maier, U.; Priesack, E.; Rink, K.; Selle, B.; Shao, H.; Singh, A. K.; Streck, T.; Sun, Y.; Wang, W.; Walther, M.

2013-12-01

This poster presents an open-source framework designed to assist water scientists in the study of catchment hydraulic functions with associated chemical processes, e.g. contaminant degradation, plant nutrient turnover. The model successfully calculates the feedbacks between surface water, subsurface water and air in standard benchmarks. In specific model applications to heterogeneous catchments, subsurface water is driven by density variations and runs through double porous media. Software codes of water science are tightly coupled by iteration, namely the Storm Water Management Model (SWMM) for urban runoff, Expert-N for simulating water fluxes and nutrient turnover in agricultural and forested soils, and OpenGeoSys (OGS) for groundwater. The coupled model calculates flow of hydrostatic shallow water over the land surface with finite volume and difference methods. The flow equations for water in the porous subsurface are discretized in space with finite elements. Chemical components are transferred through 1D, 2D or 3D watershed representations with advection-dispersion solvers or, as an alternative, random walk particle tracking. A transport solver can be in sequence with a chemical solver, e.g. PHREEQ-C, BRNS, additionally. Besides coupled partial differential equations, the concept of hydrological response units is employed in simulations at regional scale with scarce data availability. In this case, a conceptual hydrological model, specifically the Jena Adaptable Modeling System (JAMS), passes groundwater recharge through a software interface into OGS, which solves the partial differential equations of groundwater flow. Most components of the modeling framework are open source and can be modified for individual purposes. Applications range from temperate climate regions in Germany (Ammer catchment and Hessian Ried) to arid regions in the Middle East (Oman and Dead See). Some of the presented examples originate from intensively monitored research sites of the WESS research centre and the monitoring initiative TERENO. Other examples originate from the IWAS project on integrated water resources management. The model applications are primarily concerned with groundwater resources, which are endangered by overexploitation, intrusion of saltwater, and nitrate loads.

Green Infrastructure Simulation and Optimization to Achieve Combined Sewer Overflow Reductions in Philadelphia's Mill Creek Sewershed

NASA Astrophysics Data System (ADS)

Cohen, J. S.; McGarity, A. E.

2017-12-01

The ability for mass deployment of green stormwater infrastructure (GSI) to intercept significant amounts of urban runoff has the potential to reduce the frequency of a city's combined sewer overflows (CSOs). This study was performed to aid in the Overbrook Environmental Education Center's vision of applying this concept to create a Green Commercial Corridor in Philadelphia's Overbrook Neighborhood, which lies in the Mill Creek Sewershed. In an attempt to further implement physical and social reality into previous work using simulation-optimization techniques to produce GSI deployment strategies (McGarity, et al., 2016), this study's models incorporated land use types and a specific neighborhood in the sewershed. The low impact development (LID) feature in EPA's Storm Water Management Model (SWMM) was used to simulate various geographic configurations of GSI in Overbrook. The results from these simulations were used to obtain formulas describing the annual CSO reduction in the sewershed based on the deployed GSI practices. These non-linear hydrologic response formulas were then implemented into the Storm Water Investment Strategy Evaluation (StormWISE) model (McGarity, 2012), a constrained optimization model used to develop optimal stormwater management practices on the watershed scale. By saturating the avenue with GSI, not only will CSOs from the sewershed into the Schuylkill River be reduced, but ancillary social and economic benefits of GSI will also be achieved. The effectiveness of these ancillary benefits changes based on the type of GSI practice and the type of land use in which the GSI is implemented. Thus, the simulation and optimization processes were repeated while delimiting GSI deployment by land use (residential, commercial, industrial, and transportation). The results give a GSI deployment strategy that achieves desired annual CSO reductions at a minimum cost based on the locations of tree trenches, rain gardens, and rain barrels in specified land use types.

User Modeling in Adaptive Hypermedia Educational Systems

ERIC Educational Resources Information Center

Martins, Antonio Constantino; Faria, Luiz; Vaz de Carvalho, Carlos; Carrapatoso, Eurico

2008-01-01

This document is a survey in the research area of User Modeling (UM) for the specific field of Adaptive Learning. The aims of this document are: To define what it is a User Model; To present existing and well known User Models; To analyze the existent standards related with UM; To compare existing systems. In the scientific area of User Modeling…

User's Manual for the Object User Interface (OUI): An Environmental Resource Modeling Framework

USGS Publications Warehouse

Markstrom, Steven L.; Koczot, Kathryn M.

2008-01-01

The Object User Interface is a computer application that provides a framework for coupling environmental-resource models and for managing associated temporal and spatial data. The Object User Interface is designed to be easily extensible to incorporate models and data interfaces defined by the user. Additionally, the Object User Interface is highly configurable through the use of a user-modifiable, text-based control file that is written in the eXtensible Markup Language. The Object User Interface user's manual provides (1) installation instructions, (2) an overview of the graphical user interface, (3) a description of the software tools, (4) a project example, and (5) specifications for user configuration and extension.

Green roof rainfall-runoff modelling: is the comparison between conceptual and physically based approaches relevant?

NASA Astrophysics Data System (ADS)

Versini, Pierre-Antoine; Tchiguirinskaia, Ioulia; Schertzer, Daniel

2017-04-01

Green roofs are commonly considered as efficient tools to mitigate urban runoff as they can store precipitation, and consequently provide retention and detention performances. Designed as a compromise between water holding capacity, weight and hydraulic conductivity, their substrate is usually an artificial media differentiating significantly from a traditional soil. In order to assess green roofs hydrological performances, many models have been developed. Classified into two categories (conceptual and physically based), they are usually applied to reproduce the discharge of a particular monitored green roof considered as homogeneous. Although the resulted simulations could be satisfactory, the question of robustness and consistency of the calibrated parameters is often not addressed. Here, a modeling framework has been developed to assess the efficiency and the robustness of both modelling approaches (conceptual and physically based) in reproducing green roof hydrological behaviour. SWMM and VS2DT models have been used for this purpose. This work also benefits from an experimental setup where several green roofs differentiated by their substrate thickness and vegetation cover are monitored. Based on the data collected for several rainfall events, it has been studied how the calibrated parameters are effectively linked to their physical properties and how they can vary from one green roof configuration to another. Although both models reproduce correctly the observed discharges in most of the cases, their calibrated parameters exhibit a high inconsistency. For a same green roof configuration, these parameters can vary significantly from one rainfall event to another, even if they are supposed to be linked to the green roof characteristics (roughness, residual moisture content for instance). They can also be different from one green roof configuration to another although the implemented substrate is the same. Finally, it appears very difficult to find any relationship between the calibrated parameters supposed to represent similar characteristics in both models (porosity, hydraulic conductivity). These results illustrate the difficulty to reproduce the hydrological behaviour of such an artificial media constituting green roof substrate. They justify the development of new methods able to take to into account the spatial heterogeneity of the substrate for instance.

Flood Risk Assessments of Architectural Heritage - Case of Changgyeonggung Palace

NASA Astrophysics Data System (ADS)

Lee, Hyosang; Kim, Ji-sung; Lee, Ho-jin

2014-05-01

The risk of natural disasters such as flood and earthquake has increased due to recent extreme weather events. Therefore, the necessity of the risk management system to protect architectural properties, a cultural heritage of humanity, from natural disasters has been consistently felt. The solutions for managing flood risk focusing on architectural heritage are suggested and applied to protect Changgyeonggung Palace, a major palace heritage in Seoul. After the probable rainfall scenario for risk assessment (frequency: 100 years, 200 years, and 500 years) and the scenario of a probable maximum precipitation (PMP) are made and a previous rainfall event (from July 26th to 28th in 2011) is identified, they are used for the model (HEC-HMS, SWMM) to assess flood risk of certain areas covering Changgyeonggung Palace to do flood amount. Such flood amount makes it possible to identify inundation risks based on GIS models to assess flood risk of individual architectural heritage. The results of assessing such risk are used to establish the disaster risk management system that managers of architectural properties can utilize. According to the results of assessing flood risk of Changgyeonggung Palace, inundation occurs near outlets of Changgyeonggung Palace and sections of river channel for all scenarios of flood risk but the inundation risk of major architectural properties was estimated low. The methods for assessing flood risk of architectural heritage proposed in this study and the risk management system for Changgyeonggung Palace using the methods show thorough solutions for flood risk management and the possibility of using the solutions seems high. A comprehensive management system for architectural heritage will be established in the future through the review on diverse factors for disasters.

An integrated approach to place Green Infrastructure strategies in marginalized communities and evaluate stormwater mitigation

NASA Astrophysics Data System (ADS)

Garcia-Cuerva, Laura; Berglund, Emily Zechman; Rivers, Louie

2018-04-01

Increasing urbanization augments impervious surface area, which results in increased run off volumes and peak flows. Green Infrastructure (GI) approaches are a decentralized alternative for sustainable urban stormwater and provide an array of ecosystem services and foster community building by enhancing neighborhood aesthetics, increasing property value, and providing shared green spaces. While projects involving sustainability concepts and environmental design are favored in privileged communities, marginalized communities have historically been located in areas that suffer from environmental degradation. Underprivileged communities typically do not receive as many social and environmental services as advantaged communities. This research explores GI-based management strategies that are evaluated at the watershed scale to improve hydrological performance by mitigating storm water run off volumes and peak flows. GI deployment strategies are developed to address environmental justice issues by prioritizing placement in communities that are underprivileged and locations with high outreach potential. A hydrologic/hydraulic stormwater model is developed using the Storm Water Management Model (SWMM 5.1) to simulate the impacts of alternative management strategies. Management scenarios include the implementation of rain water harvesting in private households, the decentralized implementation of bioretention cells in private households, the centralized implementation of bioretention cells in municipally owned vacant land, and combinations of those strategies. Realities of implementing GI on private and public lands are taken into account to simulate various levels of coverage and routing for bioretention cell scenarios. The effects of these strategies are measured by the volumetric reduction of run off and reduction in peak flow; social benefits are not evaluated. This approach is applied in an underprivileged community within the Walnut Creek Watershed in Raleigh, North Carolina.

Designing an End-to-End System for Data Storage, Analysis, and Visualization for an Urban Environmental Observatory

NASA Astrophysics Data System (ADS)

McGuire, M. P.; Welty, C.; Gangopadhyay, A.; Karabatis, G.; Chen, Z.

2006-05-01

The urban environment is formed by complex interactions between natural and human dominated systems, the study of which requires the collection and analysis of very large datasets that span many disciplines. Recent advances in sensor technology and automated data collection have improved the ability to monitor urban environmental systems and are making the idea of an urban environmental observatory a reality. This in turn has created a number of potential challenges in data management and analysis. We present the design of an end-to-end system to store, analyze, and visualize data from a prototype urban environmental observatory based at the Baltimore Ecosystem Study, a National Science Foundation Long Term Ecological Research site (BES LTER). We first present an object-relational design of an operational database to store high resolution spatial datasets as well as data from sensor networks, archived data from the BES LTER, data from external sources such as USGS NWIS, EPA Storet, and metadata. The second component of the system design includes a spatiotemporal data warehouse consisting of a data staging plan and a multidimensional data model designed for the spatiotemporal analysis of monitoring data. The system design also includes applications for multi-resolution exploratory data analysis, multi-resolution data mining, and spatiotemporal visualization based on the spatiotemporal data warehouse. Also the system design includes interfaces with water quality models such as HSPF, SWMM, and SWAT, and applications for real-time sensor network visualization, data discovery, data download, QA/QC, and backup and recovery, all of which are based on the operational database. The system design includes both internet and workstation-based interfaces. Finally we present the design of a laboratory for spatiotemporal analysis and visualization as well as real-time monitoring of the sensor network.

Development of a multi-sensor based urban discharge forecasting system using remotely sensed data: A case study of extreme rainfall in South Korea

NASA Astrophysics Data System (ADS)

Yoon, Sunkwon; Jang, Sangmin; Park, Kyungwon

2017-04-01

Extreme weather due to changing climate is a main source of water-related disasters such as flooding and inundation and its damage will be accelerated somewhere in world wide. To prevent the water-related disasters and mitigate their damage in urban areas in future, we developed a multi-sensor based real-time discharge forecasting system using remotely sensed data such as radar and satellite. We used Communication, Ocean and Meteorological Satellite (COMS) and Korea Meteorological Agency (KMA) weather radar for quantitative precipitation estimation. The Automatic Weather System (AWS) and McGill Algorithm for Precipitation Nowcasting by Lagrangian Extrapolation (MAPLE) were used for verification of rainfall accuracy. The optimal Z-R relation was applied the Tropical Z-R relationship (Z=32R1.65), it has been confirmed that the accuracy is improved in the extreme rainfall events. In addition, the performance of blended multi-sensor combining rainfall was improved in 60mm/h rainfall and more strong heavy rainfall events. Moreover, we adjusted to forecast the urban discharge using Storm Water Management Model (SWMM). Several statistical methods have been used for assessment of model simulation between observed and simulated discharge. In terms of the correlation coefficient and r-squared discharge between observed and forecasted were highly correlated. Based on this study, we captured a possibility of real-time urban discharge forecasting system using remotely sensed data and its utilization for real-time flood warning. Acknowledgement This research was supported by a grant (13AWMP-B066744-01) from Advanced Water Management Research Program (AWMP) funded by Ministry of Land, Infrastructure and Transport (MOLIT) of Korean government.

The Impact of Drainage Network Structure on Flooding in a Small Urban Watershed in Metropolitan Baltimore, MD

NASA Astrophysics Data System (ADS)

Meierdiercks, K. L.; Smith, J. A.; Miller, A. J.

2006-12-01

The impact of urban development on watershed-scale hydrology is examined in a small urban watershed in the Metropolitan Baltimore area. Analyses focus on Dead Run, a 14.3 km2 tributary of the Gwynns Falls, which is the principal study watershed of the Baltimore Ecosystem Study. Field observations of rainfall and discharge have been collected for storms occurring in the 2003, 2004, and 2005 warm seasons including the flood of record for the USGS Dead Run at Franklintown gage (7 July 2004), in which 5 inches of rain fell in less than 4 hours. Dead Run has stream gages at 6 locations with drainage areas ranging from 1.2 to 14.3 km2. Hydrologic response to storm events varies greatly in each of the subwatersheds due to the diverse development types located there. These subwatersheds range in land use from medium-density residential, with and without stormwater management control, to commercial/light industrial with large impervious lots and an extensive network of stormwater management ponds. The unique response of each subwatershed is captured using field observations in conjunction with the EPA Stormwater Management Model (SWMM), which routes storm runoff over the land surface and through the drainage network of a watershed. Of particular importance to flood response is the structure of the drainage network (both surface channels and storm drain network) and its connectivity to preferential flow paths within the watershed. The Dead Run drainage network has been delineated using geospatial data derived from aerial photography and engineering planning drawings. Model analyses are used to examine the characteristics of flow paths that control flood response in urban watersheds. These analyses aim to identify patterns in urban flow pathways and use those patterns to predict response in other urban watersheds.

A user credit assessment model based on clustering ensemble for broadband network new media service supervision

NASA Astrophysics Data System (ADS)

Liu, Fang; Cao, San-xing; Lu, Rui

2012-04-01

This paper proposes a user credit assessment model based on clustering ensemble aiming to solve the problem that users illegally spread pirated and pornographic media contents within the user self-service oriented broadband network new media platforms. Its idea is to do the new media user credit assessment by establishing indices system based on user credit behaviors, and the illegal users could be found according to the credit assessment results, thus to curb the bad videos and audios transmitted on the network. The user credit assessment model based on clustering ensemble proposed by this paper which integrates the advantages that swarm intelligence clustering is suitable for user credit behavior analysis and K-means clustering could eliminate the scattered users existed in the result of swarm intelligence clustering, thus to realize all the users' credit classification automatically. The model's effective verification experiments are accomplished which are based on standard credit application dataset in UCI machine learning repository, and the statistical results of a comparative experiment with a single model of swarm intelligence clustering indicates this clustering ensemble model has a stronger creditworthiness distinguishing ability, especially in the aspect of predicting to find user clusters with the best credit and worst credit, which will facilitate the operators to take incentive measures or punitive measures accurately. Besides, compared with the experimental results of Logistic regression based model under the same conditions, this clustering ensemble model is robustness and has better prediction accuracy.

Optimization of storage tank locations in an urban stormwater drainage system using a two-stage approach.

PubMed

Wang, Mingming; Sun, Yuanxiang; Sweetapple, Chris

2017-12-15

Storage is important for flood mitigation and non-point source pollution control. However, to seek a cost-effective design scheme for storage tanks is very complex. This paper presents a two-stage optimization framework to find an optimal scheme for storage tanks using storm water management model (SWMM). The objectives are to minimize flooding, total suspended solids (TSS) load and storage cost. The framework includes two modules: (i) the analytical module, which evaluates and ranks the flooding nodes with the analytic hierarchy process (AHP) using two indicators (flood depth and flood duration), and then obtains the preliminary scheme by calculating two efficiency indicators (flood reduction efficiency and TSS reduction efficiency); (ii) the iteration module, which obtains an optimal scheme using a generalized pattern search (GPS) method based on the preliminary scheme generated by the analytical module. The proposed approach was applied to a catchment in CZ city, China, to test its capability in choosing design alternatives. Different rainfall scenarios are considered to test its robustness. The results demonstrate that the optimal framework is feasible, and the optimization is fast based on the preliminary scheme. The optimized scheme is better than the preliminary scheme for reducing runoff and pollutant loads under a given storage cost. The multi-objective optimization framework presented in this paper may be useful in finding the best scheme of storage tanks or low impact development (LID) controls. Copyright © 2017 Elsevier Ltd. All rights reserved.

[Simulation of rainfall and snowmelt runoff reduction in a northern city based on combination of green ecological strategies.

PubMed

Han, Jin Feng; Liu, Shuo; Dai, Jun; Qiu, Hao

2018-02-01

With the aim to control and reduce rainfall and snowmelt runoff in northern cities in China, the summer runoff and spring snowmelt runoff in the studied area were simulated with the establishment of storm water management model (SWMM). According to the climate characteristics and the situation of the studied area, the low impact development (LID) green ecological strategies suitable for the studied area were established. There were three kinds of management strategies being used, including extended green roof, snow and rainwater harvesting devices, and grass-swales or trenches. We examined the impacts of those integrated green ecological measures on the summer rainfall and spring snowmelt runoff and their mitigation effects on the drainage network pressure. The results showed that the maximum flow rates of the measured rainfall in May 24th, June 10th and July 18th 2016 were 2.7, 6.2 and 7.4 m 3 ·s -1 respectively. The peak flow rates at different return periods of 1, 2, 5, 10 years were 2.39, 3.91, 6.24 and 7.85 m 3 ·s -1 , respectively. In the snowmelt period, the peak flow appeared at the beginning of March. The LID measures had positive effect on peak flow reduction, and thus delayed peak time and relieved drainage pressure. The flow reduction rate was as high as 70%. Moreover, the snow harvesting devices played a positive role in controlling snowmelt runoff in spring.

Exploring the Linkage between Urban Flood Risk and Spatial Patterns in Small Urbanized Catchments of Beijing, China

PubMed Central

Yao, Lei; Chen, Liding; Wei, Wei

2017-01-01

In the context of global urbanization, urban flood risk in many cities has become a serious environmental issue, threatening the health of residents and the environment. A number of hydrological studies have linked urban flooding issues closely to the spectrum of spatial patterns of urbanization, but relatively little attention has been given to small-scale catchments within the realm of urban systems. This study aims to explore the hydrological effects of small-scaled urbanized catchments assigned with various landscape patterns. Twelve typical residential catchments in Beijing were selected as the study areas. Total Impervious Area (TIA), Directly Connected Impervious Area (DCIA), and a drainage index were used as the catchment spatial metrics. Three scenarios were designed as different spatial arrangement of catchment imperviousness. Runoff variables including total and peak runoff depth (Qt and Qp) were simulated by using Strom Water Management Model (SWMM). The relationship between catchment spatial patterns and runoff variables were determined, and the results demonstrated that, spatial patterns have inherent influences on flood risks in small urbanized catchments. Specifically: (1) imperviousness acts as an effective indicator in affecting both Qt and Qp; (2) reducing the number of rainwater inlets appropriately will benefit the catchment peak flow mitigation; (3) different spatial concentrations of impervious surfaces have inherent influences on Qp. These findings provide insights into the role of urban spatial patterns in driving rainfall-runoff processes in small urbanized catchments, which is essential for urban planning and flood management. PMID:28264521

Exploring the Linkage between Urban Flood Risk and Spatial Patterns in Small Urbanized Catchments of Beijing, China.

PubMed

Yao, Lei; Chen, Liding; Wei, Wei

2017-02-28

In the context of global urbanization, urban flood risk in many cities has become a serious environmental issue, threatening the health of residents and the environment. A number of hydrological studies have linked urban flooding issues closely to the spectrum of spatial patterns of urbanization, but relatively little attention has been given to small-scale catchments within the realm of urban systems. This study aims to explore the hydrological effects of small-scaled urbanized catchments assigned with various landscape patterns. Twelve typical residential catchments in Beijing were selected as the study areas. Total Impervious Area ( TIA ), Directly Connected Impervious Area ( DCIA ), and a drainage index were used as the catchment spatial metrics. Three scenarios were designed as different spatial arrangement of catchment imperviousness. Runoff variables including total and peak runoff depth ( Q t and Q p ) were simulated by using Strom Water Management Model (SWMM). The relationship between catchment spatial patterns and runoff variables were determined, and the results demonstrated that, spatial patterns have inherent influences on flood risks in small urbanized catchments. Specifically: (1) imperviousness acts as an effective indicator in affecting both Q t and Q p ; (2) reducing the number of rainwater inlets appropriately will benefit the catchment peak flow mitigation; (3) different spatial concentrations of impervious surfaces have inherent influences on Q p . These findings provide insights into the role of urban spatial patterns in driving rainfall-runoff processes in small urbanized catchments, which is essential for urban planning and flood management.

LDA-Based Unified Topic Modeling for Similar TV User Grouping and TV Program Recommendation.

PubMed

Pyo, Shinjee; Kim, Eunhui; Kim, Munchurl

2015-08-01

Social TV is a social media service via TV and social networks through which TV users exchange their experiences about TV programs that they are viewing. For social TV service, two technical aspects are envisioned: grouping of similar TV users to create social TV communities and recommending TV programs based on group and personal interests for personalizing TV. In this paper, we propose a unified topic model based on grouping of similar TV users and recommending TV programs as a social TV service. The proposed unified topic model employs two latent Dirichlet allocation (LDA) models. One is a topic model of TV users, and the other is a topic model of the description words for viewed TV programs. The two LDA models are then integrated via a topic proportion parameter for TV programs, which enforces the grouping of similar TV users and associated description words for watched TV programs at the same time in a unified topic modeling framework. The unified model identifies the semantic relation between TV user groups and TV program description word groups so that more meaningful TV program recommendations can be made. The unified topic model also overcomes an item ramp-up problem such that new TV programs can be reliably recommended to TV users. Furthermore, from the topic model of TV users, TV users with similar tastes can be grouped as topics, which can then be recommended as social TV communities. To verify our proposed method of unified topic-modeling-based TV user grouping and TV program recommendation for social TV services, in our experiments, we used real TV viewing history data and electronic program guide data from a seven-month period collected by a TV poll agency. The experimental results show that the proposed unified topic model yields an average 81.4% precision for 50 topics in TV program recommendation and its performance is an average of 6.5% higher than that of the topic model of TV users only. For TV user prediction with new TV programs, the average prediction precision was 79.6%. Also, we showed the superiority of our proposed model in terms of both topic modeling performance and recommendation performance compared to two related topic models such as polylingual topic model and bilingual topic model.

QoS prediction for web services based on user-trust propagation model

NASA Astrophysics Data System (ADS)

Thinh, Le-Van; Tu, Truong-Dinh

2017-10-01

There is an important online role for Web service providers and users; however, the rapidly growing number of service providers and users, it can create some similar functions among web services. This is an exciting area for research, and researchers seek to to propose solutions for the best service to users. Collaborative filtering (CF) algorithms are widely used in recommendation systems, although these are less effective for cold-start users. Recently, some recommender systems have been developed based on social network models, and the results show that social network models have better performance in terms of CF, especially for cold-start users. However, most social network-based recommendations do not consider the user's mood. This is a hidden source of information, and is very useful in improving prediction efficiency. In this paper, we introduce a new model called User-Trust Propagation (UTP). The model uses a combination of trust and the mood of users to predict the QoS value and matrix factorisation (MF), which is used to train the model. The experimental results show that the proposed model gives better accuracy than other models, especially for the cold-start problem.

Proceedings of the Workshop on Government Oil Spill Modeling

NASA Technical Reports Server (NTRS)

Bishop, J. M. (Compiler)

1980-01-01

Oil spill model users and modelers were brought together for the purpose of fostering joint communication and increasing understanding of mutual problems. The workshop concentrated on defining user needs, presentations on ongoing modeling programs, and discussions of supporting research for these modeling efforts. Specific user recommendations include the development of an oil spill model user library which identifies and describes available models. The development of models for the long-term fate and effect of spilled oil was examined.

Airport Performance Model : Volume 2 - User's Manual and Program Documentation

DOT National Transportation Integrated Search

1978-10-01

Volume II contains a User's manual and program documentation for the Airport Performance Model. This computer-based model is written in FORTRAN IV for the DEC-10. The user's manual describes the user inputs to the interactive program and gives sample...

Interactive Design and the Mythical "Intuitive User Interface."

ERIC Educational Resources Information Center

Bielenberg, Daniel R.

1993-01-01

Discusses the design of graphical user interfaces. Highlights include conceptual models, including user needs, content, and what multimedia can do; and tools for building the users' mental models, including metaphor, natural mappings, prompts, feedback, and user testing. (LRW)

Partitioning the impacts of spatial and climatological rainfall variability in urban drainage modeling

NASA Astrophysics Data System (ADS)

Peleg, Nadav; Blumensaat, Frank; Molnar, Peter; Fatichi, Simone; Burlando, Paolo

2017-03-01

The performance of urban drainage systems is typically examined using hydrological and hydrodynamic models where rainfall input is uniformly distributed, i.e., derived from a single or very few rain gauges. When models are fed with a single uniformly distributed rainfall realization, the response of the urban drainage system to the rainfall variability remains unexplored. The goal of this study was to understand how climate variability and spatial rainfall variability, jointly or individually considered, affect the response of a calibrated hydrodynamic urban drainage model. A stochastic spatially distributed rainfall generator (STREAP - Space-Time Realizations of Areal Precipitation) was used to simulate many realizations of rainfall for a 30-year period, accounting for both climate variability and spatial rainfall variability. The generated rainfall ensemble was used as input into a calibrated hydrodynamic model (EPA SWMM - the US EPA's Storm Water Management Model) to simulate surface runoff and channel flow in a small urban catchment in the city of Lucerne, Switzerland. The variability of peak flows in response to rainfall of different return periods was evaluated at three different locations in the urban drainage network and partitioned among its sources. The main contribution to the total flow variability was found to originate from the natural climate variability (on average over 74 %). In addition, the relative contribution of the spatial rainfall variability to the total flow variability was found to increase with longer return periods. This suggests that while the use of spatially distributed rainfall data can supply valuable information for sewer network design (typically based on rainfall with return periods from 5 to 15 years), there is a more pronounced relevance when conducting flood risk assessments for larger return periods. The results show the importance of using multiple distributed rainfall realizations in urban hydrology studies to capture the total flow variability in the response of the urban drainage systems to heavy rainfall events.

Potential Applications of Remote Sensing Precipitation Data on Urban Stormwater Modeling

NASA Astrophysics Data System (ADS)

Maggioni, V.; Tarantola, R.; Ferreira, C.

2014-12-01

Although stormwater modeling is widely used to plan, manage and operate stormwater systems in the urban environment, accuracy in model development and calibration is still problematic. Precipitation is the major forcing of stormwater modeling and one of the most important variables for accurate representation of the water cycle in urban areas. However, rainfall data availability in both temporal and spatial adequate scales is scarce. Here we investigate the potential to apply satellite precipitation products to small-scale urban watersheds with a focus on real-time data for operational use and historical data for model calibration and planning. We present a study case in Northern Virginia, part of the Washington, D.C. metropolitan region. We compare several rainfall datasets from satellites, radar and rain gauges during 2002-2008, using two multi-satellite precipitation products. The first one is the NASA TRMM TMPA at daily/0.25° time/space resolution, which is available in two forms: 3B42-Real Time and 3B42-Version 7, where the latter is a post-processed product, corrected with ground-based observations. The second one is the NOAA CMORPH at 3hrs/0.25° time/space resolution. The NOAA Climate Prediction Center (CPC) data and NCEP Stage IV radar-based product are used as reference datasets for TMPA and CMORPH, respectively. Statistical analyses are conducted to compare these datasets: correlation coefficient, RMSE, bias, probability of correct no-rain detection and of false alarm were computed with a focus on Fairfax, VA county. Preliminary results show that the TMPA products outperform CMORPH, when compared to rain gauges and radar data over the county. Moreover, no appreciable difference is detected between TMPA-V7 and TMPA-RT, which demonstrates that real-time data could be used over the urban watershed with results that are comparable to the adjusted product. Analyses are undergoing to investigate higher temporal resolution and to include a comparison with the Fairfax county rain gages data. Future work will also evaluate the impacts of different precipitation datasets on stormwater runoff for Fairfax county, using the EPA-SWMM5 storm water model.

A predictive model to allocate frequent service users of community-based mental health services to different packages of care.

PubMed

Grigoletti, Laura; Amaddeo, Francesco; Grassi, Aldrigo; Boldrini, Massimo; Chiappelli, Marco; Percudani, Mauro; Catapano, Francesco; Fiorillo, Andrea; Perris, Francesco; Bacigalupi, Maurizio; Albanese, Paolo; Simonetti, Simona; De Agostini, Paola; Tansella, Michele

2010-01-01

To develop predictive models to allocate patients into frequent and low service users groups within the Italian Community-based Mental Health Services (CMHSs). To allocate frequent users to different packages of care, identifying the costs of these packages. Socio-demographic and clinical data and GAF scores at baseline were collected for 1250 users attending five CMHSs. All psychiatric contacts made by these patients during six months were recorded. A logistic regression identified frequent service users predictive variables. Multinomial logistic regression identified variables able to predict the most appropriate package of care. A cost function was utilised to estimate costs. Frequent service users were 49%, using nearly 90% of all contacts. The model classified correctly 80% of users in the frequent and low users groups. Three packages of care were identified: Basic Community Treatment (4,133 Euro per six months); Intensive Community Treatment (6,180 Euro) and Rehabilitative Community Treatment (11,984 Euro) for 83%, 6% and 11% of frequent service users respectively. The model was found to be accurate for 85% of users. It is possible to develop predictive models to identify frequent service users and to assign them to pre-defined packages of care, and to use these models to inform the funding of psychiatric care.

A method of designing smartphone interface based on the extended user's mental model

NASA Astrophysics Data System (ADS)

Zhao, Wei; Li, Fengmin; Bian, Jiali; Pan, Juchen; Song, Song

2017-01-01

The user's mental model is the core guiding theory of product design, especially practical products. The essence of practical product is a tool which is used by users to meet their needs. Then, the most important feature of a tool is usability. The design method based on the user's mental model provides a series of practical and feasible theoretical guidance for improving the usability of the product according to the user's awareness of things. In this paper, we propose a method of designing smartphone interface based on the extended user's mental model according to further research on user groups. This approach achieves personalized customization of smartphone application interface and enhance application using efficiency.

Deriving user-informed climate information from climate model ensemble results

NASA Astrophysics Data System (ADS)

Huebener, Heike; Hoffmann, Peter; Keuler, Klaus; Pfeifer, Susanne; Ramthun, Hans; Spekat, Arne; Steger, Christian; Warrach-Sagi, Kirsten

2017-07-01

Communication between providers and users of climate model simulation results still needs to be improved. In the German regional climate modeling project ReKliEs-De a midterm user workshop was conducted to allow the intended users of the project results to assess the preliminary results and to streamline the final project results to their needs. The user feedback highlighted, in particular, the still considerable gap between climate research output and user-tailored input for climate impact research. Two major requests from the user community addressed the selection of sub-ensembles and some condensed, easy to understand information on the strengths and weaknesses of the climate models involved in the project.

User Delay Cost Model and Facilities Maintenance Cost Model for a Terminal Control Area : Volume 2. User's Manual and Program Documentation for the User Delay Cost Model

DOT National Transportation Integrated Search

1978-05-01

The User Delay Cost Model (UDCM) is a Monte Carlo simulation of certain classes of movement of air traffic in the Boston Terminal Control Area (TCA). It incorporates a weather module, an aircraft generation module, a facilities module, and an air con...

A multi-stakeholder framework for urban runoff quality management: Application of social choice and bargaining techniques.

PubMed

Ghodsi, Seyed Hamed; Kerachian, Reza; Zahmatkesh, Zahra

2016-04-15

In this paper, an integrated framework is proposed for urban runoff management. To control and improve runoff quality and quantity, Low Impact Development (LID) practices are utilized. In order to determine the LIDs' areas and locations, the Non-dominated Sorting Genetic Algorithm-II (NSGA-II), which considers three objective functions of minimizing runoff volume, runoff pollution and implementation cost of LIDs, is utilized. In this framework, the Storm Water Management Model (SWMM) is used for stream flow simulation. The non-dominated solutions provided by the NSGA-II are considered as management scenarios. To select the most preferred scenario, interactions among the main stakeholders in the study area with conflicting utilities are incorporated by utilizing bargaining models including a non-cooperative game, Nash model and social choice procedures of Borda count and approval voting. Moreover, a new social choice procedure, named pairwise voting method, is proposed and applied. Based on each conflict resolution approach, a scenario is identified as the ideal solution providing the LIDs' areas, locations and implementation cost. The proposed framework is applied for urban water quality and quantity management in the northern part of Tehran metropolitan city, Iran. Results show that the proposed pairwise voting method tends to select a scenario with a higher percentage of reduction in TSS (Total Suspended Solid) load and runoff volume, in comparison with the Borda count and approval voting methods. Besides, the Nash method presents a management scenario with the highest cost for LIDs' implementation and the maximum values for percentage of runoff volume reduction and TSS removal. The results also signify that selection of an appropriate management scenario by stakeholders in the study area depends on the available financial resources and the relative importance of runoff quality improvement in comparison with reducing the runoff volume. Copyright © 2016 Elsevier B.V. All rights reserved.

Integrated Model for E-Learning Acceptance

NASA Astrophysics Data System (ADS)

Ramadiani; Rodziah, A.; Hasan, S. M.; Rusli, A.; Noraini, C.

2016-01-01

E-learning is not going to work if the system is not used in accordance with user needs. User Interface is very important to encourage using the application. Many theories had discuss about user interface usability evaluation and technology acceptance separately, actually why we do not make it correlation between interface usability evaluation and user acceptance to enhance e-learning process. Therefore, the evaluation model for e-learning interface acceptance is considered important to investigate. The aim of this study is to propose the integrated e-learning user interface acceptance evaluation model. This model was combined some theories of e-learning interface measurement such as, user learning style, usability evaluation, and the user benefit. We formulated in constructive questionnaires which were shared at 125 English Language School (ELS) students. This research statistics used Structural Equation Model using LISREL v8.80 and MANOVA analysis.

An Inter-Personal Information Sharing Model Based on Personalized Recommendations

NASA Astrophysics Data System (ADS)

Kamei, Koji; Funakoshi, Kaname; Akahani, Jun-Ichi; Satoh, Tetsuji

In this paper, we propose an inter-personal information sharing model among individuals based on personalized recommendations. In the proposed model, we define an information resource as shared between people when both of them consider it important --- not merely when they both possess it. In other words, the model defines the importance of information resources based on personalized recommendations from identifiable acquaintances. The proposed method is based on a collaborative filtering system that focuses on evaluations from identifiable acquaintances. It utilizes both user evaluations for documents and their contents. In other words, each user profile is represented as a matrix of credibility to the other users' evaluations on each domain of interests. We extended the content-based collaborative filtering method to distinguish other users to whom the documents should be recommended. We also applied a concept-based vector space model to represent the domain of interests instead of the previous method which represented them by a term-based vector space model. We introduce a personalized concept-base compiled from each user's information repository to improve the information retrieval in the user's environment. Furthermore, the concept-spaces change from user to user since they reflect the personalities of the users. Because of different concept-spaces, the similarity between a document and a user's interest varies for each user. As a result, a user receives recommendations from other users who have different view points, achieving inter-personal information sharing based on personalized recommendations. This paper also describes an experimental simulation of our information sharing model. In our laboratory, five participants accumulated a personal repository of e-mails and web pages from which they built their own concept-base. Then we estimated the user profiles according to personalized concept-bases and sets of documents which others evaluated. We simulated inter-personal recommendation based on the user profiles and evaluated the performance of the recommendation method by comparing the recommended documents to the result of the content-based collaborative filtering.

PRIMO: An Interactive Homology Modeling Pipeline.

PubMed

Hatherley, Rowan; Brown, David K; Glenister, Michael; Tastan Bishop, Özlem

2016-01-01

The development of automated servers to predict the three-dimensional structure of proteins has seen much progress over the years. These servers make calculations simpler, but largely exclude users from the process. In this study, we present the PRotein Interactive MOdeling (PRIMO) pipeline for homology modeling of protein monomers. The pipeline eases the multi-step modeling process, and reduces the workload required by the user, while still allowing engagement from the user during every step. Default parameters are given for each step, which can either be modified or supplemented with additional external input. PRIMO has been designed for users of varying levels of experience with homology modeling. The pipeline incorporates a user-friendly interface that makes it easy to alter parameters used during modeling. During each stage of the modeling process, the site provides suggestions for novice users to improve the quality of their models. PRIMO provides functionality that allows users to also model ligands and ions in complex with their protein targets. Herein, we assess the accuracy of the fully automated capabilities of the server, including a comparative analysis of the available alignment programs, as well as of the refinement levels used during modeling. The tests presented here demonstrate the reliability of the PRIMO server when producing a large number of protein models. While PRIMO does focus on user involvement in the homology modeling process, the results indicate that in the presence of suitable templates, good quality models can be produced even without user intervention. This gives an idea of the base level accuracy of PRIMO, which users can improve upon by adjusting parameters in their modeling runs. The accuracy of PRIMO's automated scripts is being continuously evaluated by the CAMEO (Continuous Automated Model EvaluatiOn) project. The PRIMO site is free for non-commercial use and can be accessed at https://primo.rubi.ru.ac.za/.

PRIMO: An Interactive Homology Modeling Pipeline

PubMed Central

Glenister, Michael

2016-01-01

The development of automated servers to predict the three-dimensional structure of proteins has seen much progress over the years. These servers make calculations simpler, but largely exclude users from the process. In this study, we present the PRotein Interactive MOdeling (PRIMO) pipeline for homology modeling of protein monomers. The pipeline eases the multi-step modeling process, and reduces the workload required by the user, while still allowing engagement from the user during every step. Default parameters are given for each step, which can either be modified or supplemented with additional external input. PRIMO has been designed for users of varying levels of experience with homology modeling. The pipeline incorporates a user-friendly interface that makes it easy to alter parameters used during modeling. During each stage of the modeling process, the site provides suggestions for novice users to improve the quality of their models. PRIMO provides functionality that allows users to also model ligands and ions in complex with their protein targets. Herein, we assess the accuracy of the fully automated capabilities of the server, including a comparative analysis of the available alignment programs, as well as of the refinement levels used during modeling. The tests presented here demonstrate the reliability of the PRIMO server when producing a large number of protein models. While PRIMO does focus on user involvement in the homology modeling process, the results indicate that in the presence of suitable templates, good quality models can be produced even without user intervention. This gives an idea of the base level accuracy of PRIMO, which users can improve upon by adjusting parameters in their modeling runs. The accuracy of PRIMO’s automated scripts is being continuously evaluated by the CAMEO (Continuous Automated Model EvaluatiOn) project. The PRIMO site is free for non-commercial use and can be accessed at https://primo.rubi.ru.ac.za/. PMID:27855192

Hydro-meteorological evaluation of downscaled global ensemble rainfall forecasts

NASA Astrophysics Data System (ADS)

Gaborit, Étienne; Anctil, François; Fortin, Vincent; Pelletier, Geneviève

2013-04-01

Ensemble rainfall forecasts are of high interest for decision making, as they provide an explicit and dynamic assessment of the uncertainty in the forecast (Ruiz et al. 2009). However, for hydrological forecasting, their low resolution currently limits their use to large watersheds (Maraun et al. 2010). In order to bridge this gap, various implementations of the statistic-stochastic multi-fractal downscaling technique presented by Perica and Foufoula-Georgiou (1996) were compared, bringing Environment Canada's global ensemble rainfall forecasts from a 100 by 70-km resolution down to 6 by 4-km, while increasing each pixel's rainfall variance and preserving its original mean. For comparison purposes, simpler methods were also implemented such as the bi-linear interpolation, which disaggregates global forecasts without modifying their variance. The downscaled meteorological products were evaluated using different scores and diagrams, from both a meteorological and a hydrological view points. The meteorological evaluation was conducted comparing the forecasted rainfall depths against nine days of observed values taken from Québec City rain gauge database. These 9 days present strong precipitation events occurring during the summer of 2009. For the hydrologic evaluation, the hydrological models SWMM5 and (a modified version of) GR4J were implemented on a small 6 km2 urban catchment located in the Québec City region. Ensemble hydrologic forecasts with a time step of 3 hours were then performed over a 3-months period of the summer of 2010 using the original and downscaled ensemble rainfall forecasts. The most important conclusions of this work are that the overall quality of the forecasts was preserved during the disaggregation procedure and that the disaggregated products using this variance-enhancing method were of similar quality than bi-linear interpolation products. However, variance and dispersion of the different members were, of course, much improved for the variance-enhanced products, compared to the bi-linear interpolation, which is a decisive advantage. The disaggregation technique of Perica and Foufoula-Georgiou (1996) hence represents an interesting way of bridging the gap between the meteorological models' resolution and the high degree of spatial precision sometimes required by hydrological models in their precipitation representation. References Maraun, D., Wetterhall, F., Ireson, A. M., Chandler, R. E., Kendon, E. J., Widmann, M., Brienen, S., Rust, H. W., Sauter, T., Themeßl, M., Venema, V. K. C., Chun, K. P., Goodess, C. M., Jones, R. G., Onof, C., Vrac, M., and Thiele-Eich, I. 2010. Precipitation downscaling under climate change: recent developments to bridge the gap between dynamical models and the end user. Reviews of Geophysics, 48 (3): RG3003, [np]. Doi: 10.1029/2009RG000314. Perica, S., and Foufoula-Georgiou, E. 1996. Model for multiscale disaggregation of spatial rainfall based on coupling meteorological and scaling descriptions. Journal Of Geophysical Research, 101(D21): 26347-26361. Ruiz, J., Saulo, C. and Kalnay, E. 2009. Comparison of Methods Used to Generate Probabilistic Quantitative Precipitation Forecasts over South America. Weather and forecasting, 24: 319-336. DOI: 10.1175/2008WAF2007098.1 This work is distributed under the Creative Commons Attribution 3.0 Unported License together with an author copyright. This license does not conflict with the regulations of the Crown Copyright.

A User-Centered Approach to Adaptive Hypertext Based on an Information Relevance Model

NASA Technical Reports Server (NTRS)

Mathe, Nathalie; Chen, James

1994-01-01

Rapid and effective to information in large electronic documentation systems can be facilitated if information relevant in an individual user's content can be automatically supplied to this user. However most of this knowledge on contextual relevance is not found within the contents of documents, it is rather established incrementally by users during information access. We propose a new model for interactively learning contextual relevance during information retrieval, and incrementally adapting retrieved information to individual user profiles. The model, called a relevance network, records the relevance of references based on user feedback for specific queries and user profiles. It also generalizes such knowledge to later derive relevant references for similar queries and profiles. The relevance network lets users filter information by context of relevance. Compared to other approaches, it does not require any prior knowledge nor training. More importantly, our approach to adaptivity is user-centered. It facilitates acceptance and understanding by users by giving them shared control over the adaptation without disturbing their primary task. Users easily control when to adapt and when to use the adapted system. Lastly, the model is independent of the particular application used to access information, and supports sharing of adaptations among users.

Modeling Goal-Directed User Exploration in Human-Computer Interaction

DTIC Science & Technology

2011-02-01

scent, other factors including the layout position and grouping of options in the user-interface also affect user exploration and the likelihood of...grouping of options in the user-interface also affect user exploration and the likelihood of success. This dissertation contributes a new model of goal...better inform UI design. 1.1 RESEARCH GAPS IN MODELING In addition to infoscent, the layout of the UI also affects the choices made during

Modeling long-term human activeness using recurrent neural networks for biometric data.

PubMed

Kim, Zae Myung; Oh, Hyungrai; Kim, Han-Gyu; Lim, Chae-Gyun; Oh, Kyo-Joong; Choi, Ho-Jin

2017-05-18

With the invention of fitness trackers, it has been possible to continuously monitor a user's biometric data such as heart rates, number of footsteps taken, and amount of calories burned. This paper names the time series of these three types of biometric data, the user's "activeness", and investigates the feasibility in modeling and predicting the long-term activeness of the user. The dataset used in this study consisted of several months of biometric time-series data gathered by seven users independently. Four recurrent neural network (RNN) architectures-as well as a deep neural network and a simple regression model-were proposed to investigate the performance on predicting the activeness of the user under various length-related hyper-parameter settings. In addition, the learned model was tested to predict the time period when the user's activeness falls below a certain threshold. A preliminary experimental result shows that each type of activeness data exhibited a short-term autocorrelation; and among the three types of data, the consumed calories and the number of footsteps were positively correlated, while the heart rate data showed almost no correlation with neither of them. It is probably due to this characteristic of the dataset that although the RNN models produced the best results on modeling the user's activeness, the difference was marginal; and other baseline models, especially the linear regression model, performed quite admirably as well. Further experimental results show that it is feasible to predict a user's future activeness with precision, for example, a trained RNN model could predict-with the precision of 84%-when the user would be less active within the next hour given the latest 15 min of his activeness data. This paper defines and investigates the notion of a user's "activeness", and shows that forecasting the long-term activeness of the user is indeed possible. Such information can be utilized by a health-related application to proactively recommend suitable events or services to the user.

A Grammar-based Approach for Modeling User Interactions and Generating Suggestions During the Data Exploration Process.

PubMed

Dabek, Filip; Caban, Jesus J

2017-01-01

Despite the recent popularity of visual analytics focusing on big data, little is known about how to support users that use visualization techniques to explore multi-dimensional datasets and accomplish specific tasks. Our lack of models that can assist end-users during the data exploration process has made it challenging to learn from the user's interactive and analytical process. The ability to model how a user interacts with a specific visualization technique and what difficulties they face are paramount in supporting individuals with discovering new patterns within their complex datasets. This paper introduces the notion of visualization systems understanding and modeling user interactions with the intent of guiding a user through a task thereby enhancing visual data exploration. The challenges faced and the necessary future steps to take are discussed; and to provide a working example, a grammar-based model is presented that can learn from user interactions, determine the common patterns among a number of subjects using a K-Reversible algorithm, build a set of rules, and apply those rules in the form of suggestions to new users with the goal of guiding them along their visual analytic process. A formal evaluation study with 300 subjects was performed showing that our grammar-based model is effective at capturing the interactive process followed by users and that further research in this area has the potential to positively impact how users interact with a visualization system.

Software Tools For Building Decision-support Models For Flood Emergency Situations

NASA Astrophysics Data System (ADS)

Garrote, L.; Molina, M.; Ruiz, J. M.; Mosquera, J. C.

The SAIDA decision-support system was developed by the Spanish Ministry of the Environment to provide assistance to decision-makers during flood situations. SAIDA has been tentatively implemented in two test basins: Jucar and Guadalhorce, and the Ministry is currently planning to have it implemented in all major Spanish basins in a few years' time. During the development cycle of SAIDA, the need for providing as- sistance to end-users in model definition and calibration was clearly identified. System developers usually emphasise abstraction and generality with the goal of providing a versatile software environment. End users, on the other hand, require concretion and specificity to adapt the general model to their local basins. As decision-support models become more complex, the gap between model developers and users gets wider: Who takes care of model definition, calibration and validation?. Initially, model developers perform these tasks, but the scope is usually limited to a few small test basins. Before the model enters operational stage, end users must get involved in model construction and calibration, in order to gain confidence in the model recommendations. However, getting the users involved in these activities is a difficult task. The goal of this re- search is to develop representation techniques for simulation and management models in order to define, develop and validate a mechanism, supported by a software envi- ronment, oriented to provide assistance to the end-user in building decision models for the prediction and management of river floods in real time. The system is based on three main building blocks: A library of simulators of the physical system, an editor to assist the user in building simulation models, and a machine learning method to calibrate decision models based on the simulation models provided by the user.

Novel Virtual User Models of Mild Cognitive Impairment for Simulating Dementia

PubMed Central

Segkouli, Sofia; Tzovaras, Dimitrios; Tsakiris, Thanos; Tsolaki, Magda; Karagiannidis, Charalampos

2015-01-01

Virtual user modeling research has attempted to address critical issues of human-computer interaction (HCI) such as usability and utility through a large number of analytic, usability-oriented approaches as cognitive models in order to provide users with experiences fitting to their specific needs. However, there is demand for more specific modules embodied in cognitive architecture that will detect abnormal cognitive decline across new synthetic task environments. Also, accessibility evaluation of graphical user interfaces (GUIs) requires considerable effort for enhancing ICT products accessibility for older adults. The main aim of this study is to develop and test virtual user models (VUM) simulating mild cognitive impairment (MCI) through novel specific modules, embodied at cognitive models and defined by estimations of cognitive parameters. Well-established MCI detection tests assessed users' cognition, elaborated their ability to perform multitasks, and monitored the performance of infotainment related tasks to provide more accurate simulation results on existing conceptual frameworks and enhanced predictive validity in interfaces' design supported by increased tasks' complexity to capture a more detailed profile of users' capabilities and limitations. The final outcome is a more robust cognitive prediction model, accurately fitted to human data to be used for more reliable interfaces' evaluation through simulation on the basis of virtual models of MCI users. PMID:26339282

Predicting individual fusional range from optometric data

NASA Astrophysics Data System (ADS)

Endrikhovski, Serguei; Jin, Elaine; Miller, Michael E.; Ford, Robert W.

2005-03-01

A model was developed to predict the range of disparities that can be fused by an individual user from optometric measurements. This model uses parameters, such as dissociated phoria and fusional reserves, to calculate an individual user"s fusional range (i.e., the disparities that can be fused on stereoscopic displays) when the user views a stereoscopic stimulus from various distances. This model is validated by comparing its output with data from a study in which the individual fusional range of a group of users was quantified while they viewed a stereoscopic display from distances of 0.5, 1.0, and 2.0 meters. Overall, the model provides good data predictions for the majority of the subjects and can be generalized for other viewing conditions. The model may, therefore, be used within a customized stereoscopic system, which would render stereoscopic information in a way that accounts for the individual differences in fusional range. Because the comfort of an individual user also depends on the user"s ability to fuse stereo images, such a system may, consequently, improve the comfort level and viewing experience for people with different stereoscopic fusional capabilities.

Estimation of Stormwater Interception Rate for various LID Facilities

NASA Astrophysics Data System (ADS)

Kim, S.; Lee, O.; Choi, J.

2017-12-01

In this study, the stormwater interception rate is proposed to apply in the design of LID facilities. For this purpose, EPA-SWMM is built with some areas of Noksan National Industrial Complex where long-term observed stormwater data were monitored and stormwater interception rates for various design capacities of various LID facilities are estimated. While the sensitivity of stormwater interception rate according to design specifications of bio-retention and infiltration trench facilities is not large, the sensitivity of stormwater interception rate according to local rainfall characteristics is relatively big. As a result of comparing the present rainfall interception rate estimation method which is officially operated in Korea with the one proposed in this study, it will be presented that the present method is highly likely to overestimate the performance of the bio-retention and infiltration trench facilities. Finally, a new stormwater interception rate formulas for the bio-retention and infiltration trench LID facilities will be proposed. Acknowledgement This research was supported by a grant (2016000200002) from Public Welfare Technology Development Program funded by Ministry of Environment of Korean government.

The Impact of Biofuels on Climate Change from Marginal Land over East Asia using the RegCM4

NASA Astrophysics Data System (ADS)

Kim, S.; Lee, O.; Choi, J.

2016-12-01

In this study, the stormwater interception rate is proposed to apply in the design of LID facilities. For this purpose, EPA-SWMM is built with some areas of Noksan National Industrial Complex where long-term observed stormwater data were monitored and stormwater interception rates for various design capacities of various LID facilities are estimated. While the sensitivity of stormwater interception rate according to design specifications of bio-retention and infiltration trench facilities is not large, the sensitivity of stormwater interception rate according to local rainfall characteristics is relatively big. As a result of comparing the present rainfall interception rate estimation method which is officially operated in Korea with the one proposed in this study, it will be presented that the present method is highly likely to overestimate the performance of the bio-retention and infiltration trench facilities. Finally, a new stormwater interception rate formulas for the bio-retention and infiltration trench LID facilities will be proposed. Acknowledgement This research was supported by a grant (2016000200002) from Public Welfare Technology Development Program funded by Ministry of Environment of Korean government.

Artificial intelligence techniques for modeling database user behavior

NASA Technical Reports Server (NTRS)

Tanner, Steve; Graves, Sara J.

1990-01-01

The design and development of the adaptive modeling system is described. This system models how a user accesses a relational database management system in order to improve its performance by discovering use access patterns. In the current system, these patterns are used to improve the user interface and may be used to speed data retrieval, support query optimization and support a more flexible data representation. The system models both syntactic and semantic information about the user's access and employs both procedural and rule-based logic to manipulate the model.

Adaptive Interfaces

DTIC Science & Technology

1990-11-01

to design and implement an adaptive intelligent interface for a command-and-control-style domain. The primary functionality of the resulting...technical tasks, as follows: 1. Analysis of Current Interface Technologies 2. Dejineation of User Roles 3. Development of User Models 4. Design of Interface...Management Association (FEMA). In the initial version of the prototype, two distin-t user models were designed . One type of user modeled by the system is

Social relevance: toward understanding the impact of the individual in an information cascade

NASA Astrophysics Data System (ADS)

Hall, Robert T.; White, Joshua S.; Fields, Jeremy

2016-05-01

Information Cascades (IC) through a social network occur due to the decision of users to disseminate content. We define this decision process as User Diffusion (UD). IC models typically describe an information cascade by treating a user as a node within a social graph, where a node's reception of an idea is represented by some activation state. The probability of activation then becomes a function of a node's connectedness to other activated nodes as well as, potentially, the history of activation attempts. We enrich this Coarse-Grained User Diffusion (CGUD) model by applying actor type logics to the nodes of the graph. The resulting Fine-Grained User Diffusion (FGUD) model utilizes prior research in actor typing to generate a predictive model regarding the future influence a user will have on an Information Cascade. Furthermore, we introduce a measure of Information Resonance that is used to aid in predictions regarding user behavior.

What's all the talk about? Topic modelling in a mental health Internet support group.

PubMed

Carron-Arthur, Bradley; Reynolds, Julia; Bennett, Kylie; Bennett, Anthony; Griffiths, Kathleen M

2016-10-28

The majority of content in an Internet Support Group (ISG) is contributed by 1 % of the users ('super users'). Computational methods, such as topic modelling, can provide a large-scale quantitative objective description of this content. Such methods may provide a new perspective on the nature of engagement on ISGs including the role of super users and their possible effect on other users. A topic model was computed for all posts (N = 131,004) in the ISG BlueBoard using Latent Dirichlet Allocation. A model containing 25 topics was selected on the basis of intelligibility as determined by diagnostic metrics and qualitative investigation. This model yielded 21 substantive topics for further analysis. Two chi-square tests were conducted separately for each topic to ascertain: (i) if the odds of super users' and other users' posting differed for each topic; and (ii) if for super users the odds of posting differed depending on whether the response was to a super user or to another user. The 21 substantive topics covered a range of issues related to mental health and peer-support. There were significantly higher odds that super users wrote content on 13 topics, with the greatest effects being for Parenting Role (OR [95%CI] = 7.97 [7.85-8.10]), Co-created Fiction (4.22 [4.17-4.27]), Mental Illness (3.13 [3.11-3.16]) and Positive Change (2.82 [2.79-2.84]). There were significantly lower odds for super users on 7 topics, with the greatest effects being for the topics Depression (OR = 0.27 [0.27-0.28]), Medication (0.36 [0.36-0.37]), Therapy (0.55 [0.54-0.55]) and Anxiety (0.55 [0.55-0.55]). However, super users were significantly more likely to write content on 5 out of these 7 topics when responding to other users than when responding to fellow super users. The findings suggest that super users serve the role of emotionally supportive companions with a focus on topics broadly resembling the consumer/carer model of recovery. Other users engage in topics with a greater focus on experiential knowledge, disclosure and informational support, a pattern resembling the clinical symptom-focussed approach to recovery. However, super users modify their content in response to other users in a manner consistent with being 'active help providers'.

Use Model for a User Centred Design in Multidisciplinary Teams.

PubMed

Clark, Colin; Michelle, Jess; Shahi, Sepideh; Stolarick, Kevin; Trevinarus, Jutta; Vanderheiden, Gregg; Vimarlund, Vivian

2017-01-01

The Use Model identifies user groups who will be using services and products the Prosperity4All infrastructure offers. The Model provides developers a tool to keep in mind the full diversity of users while building and designing the infrastructure.

TERSSE: Definition of the Total Earth Resources System for the Shuttle Era. Volume 7: User Models: A System Assessment

NASA Technical Reports Server (NTRS)

1974-01-01

User models defined as any explicit process or procedure used to transform information extracted from remotely sensed data into a form useful as a resource management information input are discussed. The role of the user models as information, technological, and operations interfaces between the TERSSE and the resource managers is emphasized. It is recommended that guidelines and management strategies be developed for a systems approach to user model development.

Systems Engineering Model and Training Application for Desktop Environment

NASA Technical Reports Server (NTRS)

May, Jeffrey T.

2010-01-01

Provide a graphical user interface based simulator for desktop training, operations and procedure development and system reference. This simulator allows for engineers to train and further understand the dynamics of their system from their local desktops. It allows the users to train and evaluate their system at a pace and skill level based on the user's competency and from a perspective based on the user's need. The simulator will not require any special resources to execute and should generally be available for use. The interface is based on a concept of presenting the model of the system in ways that best suits the user's application or training needs. The three levels of views are Component View, the System View (overall system), and the Console View (monitor). These views are portals into a single model, so changing the model from one view or from a model manager Graphical User Interface will be reflected on all other views.

MollDE: a homology modeling framework you can click with.

PubMed

Canutescu, Adrian A; Dunbrack, Roland L

2005-06-15

Molecular Integrated Development Environment (MolIDE) is an integrated application designed to provide homology modeling tools and protocols under a uniform, user-friendly graphical interface. Its main purpose is to combine the most frequent modeling steps in a semi-automatic, interactive way, guiding the user from the target protein sequence to the final three-dimensional protein structure. The typical basic homology modeling process is composed of building sequence profiles of the target sequence family, secondary structure prediction, sequence alignment with PDB structures, assisted alignment editing, side-chain prediction and loop building. All of these steps are available through a graphical user interface. MolIDE's user-friendly and streamlined interactive modeling protocol allows the user to focus on the important modeling questions, hiding from the user the raw data generation and conversion steps. MolIDE was designed from the ground up as an open-source, cross-platform, extensible framework. This allows developers to integrate additional third-party programs to MolIDE. http://dunbrack.fccc.edu/molide/molide.php rl_dunbrack@fccc.edu.

Designing visual displays and system models for safe reactor operations based on the user`s perspective of the system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Brown-VanHoozer, S.A.

Most designers are not schooled in the area of human-interaction psychology and therefore tend to rely on the traditional ergonomic aspects of human factors when designing complex human-interactive workstations related to reactor operations. They do not take into account the differences in user information processing behavior and how these behaviors may affect individual and team performance when accessing visual displays or utilizing system models in process and control room areas. Unfortunately, by ignoring the importance of the integration of the user interface at the information process level, the result can be sub-optimization and inherently error- and failure-prone systems. Therefore, tomore » minimize or eliminate failures in human-interactive systems, it is essential that the designers understand how each user`s processing characteristics affects how the user gathers information, and how the user communicates the information to the designer and other users. A different type of approach in achieving this understanding is Neuro Linguistic Programming (NLP). The material presented in this paper is based on two studies involving the design of visual displays, NLP, and the user`s perspective model of a reactor system. The studies involve the methodology known as NLP, and its use in expanding design choices from the user`s ``model of the world,`` in the areas of virtual reality, workstation design, team structure, decision and learning style patterns, safety operations, pattern recognition, and much, much more.« less

Statistical Examination of the Resolution of a Block-Scale Urban Drainage Model

NASA Astrophysics Data System (ADS)

Goldstein, A.; Montalto, F. A.; Digiovanni, K. A.

2009-12-01

Stormwater drainage models are utilized by cities in order to plan retention systems to prevent combined sewage overflows and design for development. These models aggregate subcatchments and ignore small pipelines providing a coarse representation of a sewage network. This study evaluates the importance of resolution by comparing two models developed on a neighborhood scale for predicting the total quantity and peak flow of runoff to observed runoff measured at the site. The low and high resolution models were designed for a 2.6 ha block in Bronx, NYC in EPA Stormwater Management Model (SWMM) using a single catchment and separate subcatchments based on surface cover, respectively. The surface covers represented included sidewalks, street, buildings, and backyards. Characteristics for physical surfaces and the infrastructure in the high resolution mode were determined from site visits, sewer pipe maps, aerial photographs, and GIS data-sets provided by the NYC Department of City Planning. Since the low resolution model was depicted at a coarser scale, generalizations were assumed about the overall average characteristics of the catchment. Rainfall and runoff data were monitored over a four month period during the summer rainy season. A total of 53 rain fall events were recorded but only 29 storms produced significant amount of runoffs to be evaluated in the simulations. To determine which model was more accurate at predicting the observed runoff, three characteristics for each storm were compared: peak runoff, total runoff, and time to peak. Two statistical tests were used to determine the significance of the results: the percent difference for each storm and the overall Chi-squared Goodness of Fit distribution for both the low and high resolution model. These tests will evaluate if there is a statistical difference depending on the resolution of scale of the stormwater model. The scale of representation is being evaluated because it could have a profound impact on how low-impact development strategies are assessed. Rerouting flows to delay the time of entry into the combined sewage is the primary goal of stormwater source controls which may be better differentiated in a high resolution as opposed to low resolution model. The preliminary hypothesis is that the low resolution model simplifies watershed by defining attributes uniformly across the watershed. In the high resolution model, the physical flow can be more accurate depicted by connected the various subcatchments. For example, the runoff from buildings can directly be routed to the backyard. The main drawback to the high resolution model is the risk of adding uncertainty due to the number of parameters.

Business Performer-Centered Design of User Interfaces

NASA Astrophysics Data System (ADS)

Sousa, Kênia; Vanderdonckt, Jean

Business Performer-Centered Design of User Interfaces is a new design methodology that adopts business process (BP) definition and a business performer perspective for managing the life cycle of user interfaces of enterprise systems. In this methodology, when the organization has a business process culture, the business processes of an organization are firstly defined according to a traditional methodology for this kind of artifact. These business processes are then transformed into a series of task models that represent the interactive parts of the business processes that will ultimately lead to interactive systems. When the organization has its enterprise systems, but not yet its business processes modeled, the user interfaces of the systems help derive tasks models, which are then used to derive the business processes. The double linking between a business process and a task model, and between a task model and a user interface model makes it possible to ensure traceability of the artifacts in multiple paths and enables a more active participation of business performers in analyzing the resulting user interfaces. In this paper, we outline how a human-perspective is used tied to a model-driven perspective.

Stochastic Lanchester Air-to-Air Campaign Model: Model Description and Users Guides

DTIC Science & Technology

2009-01-01

STOCHASTIC LANCHESTER AIR-TO-AIR CAMPAIGN MODEL MODEL DESCRIPTION AND USERS GUIDES—2009 REPORT PA702T1 Rober t V. Hemm Jr. Dav id A . Lee...LMI © 2009. ALL RIGHTS RESERVED. Stochastic Lanchester Air-to-Air Campaign Model: Model Description and Users Guides—2009 PA702T1/JANUARY...2009 Executive Summary This report documents the latest version of the Stochastic Lanchester Air-to-Air Campaign Model (SLAACM), developed by LMI for

Making the Invisible Visible: Personas and Mental Models of Distance Education Library Users

ERIC Educational Resources Information Center

Lewis, Cynthia; Contrino, Jacline

2016-01-01

Gaps between users' and designers' mental models of digital libraries often result in adverse user experiences. This article details an exploratory user research study at a large, predominantly online university serving non-traditional distance education students with the goal of understanding these gaps. Using qualitative data, librarians created…

The System Dynamics Model User Sustainability Explorer (SD-MUSE) user interface: a user-friendly tool for interpreting system dynamic models

EPA Science Inventory

Sustainability-based decision making is a challenging process that requires balancing trade-offs among social, economic, and environmental components. System Dynamic (SD) models can be useful tools to inform sustainability-based decision making because they provide a holistic co...

Enabling Accessibility Through Model-Based User Interface Development.

PubMed

Ziegler, Daniel; Peissner, Matthias

2017-01-01

Adaptive user interfaces (AUIs) can increase the accessibility of interactive systems. They provide personalized display and interaction modes to fit individual user needs. Most AUI approaches rely on model-based development, which is considered relatively demanding. This paper explores strategies to make model-based development more attractive for mainstream developers.

Research on potential user identification model for electric energy substitution

NASA Astrophysics Data System (ADS)

Xia, Huaijian; Chen, Meiling; Lin, Haiying; Yang, Shuo; Miao, Bo; Zhu, Xinzhi

2018-01-01

The implementation of energy substitution plays an important role in promoting the development of energy conservation and emission reduction in china. Energy service management platform of alternative energy users based on the data in the enterprise production value, product output, coal and other energy consumption as a potential evaluation index, using principal component analysis model to simplify the formation of characteristic index, comprehensive index contains the original variables, and using fuzzy clustering model for the same industry user’s flexible classification. The comprehensive index number and user clustering classification based on constructed particle optimization neural network classification model based on the user, user can replace electric potential prediction. The results of an example show that the model can effectively predict the potential of users’ energy potential.

E-book recommender system design and implementation based on data mining

NASA Astrophysics Data System (ADS)

Wang, Zongjiang

2011-12-01

In the knowledge explosion, rapid development of information age, how quickly the user or users interested in useful information for feedback to the user problem to be solved in this article. This paper based on data mining, association rules to the model and classification model a combination of electronic books on the recommendation of the user's neighboring users interested in e-books to target users. Introduced the e-book recommendation and the key technologies, system implementation algorithms, and implementation process, was proved through experiments that this system can help users quickly find the required e-books.

Neuronvisio: A Graphical User Interface with 3D Capabilities for NEURON.

PubMed

Mattioni, Michele; Cohen, Uri; Le Novère, Nicolas

2012-01-01

The NEURON simulation environment is a commonly used tool to perform electrical simulation of neurons and neuronal networks. The NEURON User Interface, based on the now discontinued InterViews library, provides some limited facilities to explore models and to plot their simulation results. Other limitations include the inability to generate a three-dimensional visualization, no standard mean to save the results of simulations, or to store the model geometry within the results. Neuronvisio (http://neuronvisio.org) aims to address these deficiencies through a set of well designed python APIs and provides an improved UI, allowing users to explore and interact with the model. Neuronvisio also facilitates access to previously published models, allowing users to browse, download, and locally run NEURON models stored in ModelDB. Neuronvisio uses the matplotlib library to plot simulation results and uses the HDF standard format to store simulation results. Neuronvisio can be viewed as an extension of NEURON, facilitating typical user workflows such as model browsing, selection, download, compilation, and simulation. The 3D viewer simplifies the exploration of complex model structure, while matplotlib permits the plotting of high-quality graphs. The newly introduced ability of saving numerical results allows users to perform additional analysis on their previous simulations.

Influence maximization in social networks under an independent cascade-based model

NASA Astrophysics Data System (ADS)

Wang, Qiyao; Jin, Yuehui; Lin, Zhen; Cheng, Shiduan; Yang, Tan

2016-02-01

The rapid growth of online social networks is important for viral marketing. Influence maximization refers to the process of finding influential users who make the most of information or product adoption. An independent cascade-based model for influence maximization, called IMIC-OC, was proposed to calculate positive influence. We assumed that influential users spread positive opinions. At the beginning, users held positive or negative opinions as their initial opinions. When more users became involved in the discussions, users balanced their own opinions and those of their neighbors. The number of users who did not change positive opinions was used to determine positive influence. Corresponding influential users who had maximum positive influence were then obtained. Experiments were conducted on three real networks, namely, Facebook, HEP-PH and Epinions, to calculate maximum positive influence based on the IMIC-OC model and two other baseline methods. The proposed model resulted in larger positive influence, thus indicating better performance compared with the baseline methods.

FLIP for FLAG model visualization

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wooten, Hasani Omar

A graphical user interface has been developed for FLAG users. FLIP (FLAG Input deck Parser) provides users with an organized view of FLAG models and a means for efficiently and easily navigating and editing nodes, parameters, and variables.

Information Filtering Based on Users' Negative Opinions

NASA Astrophysics Data System (ADS)

Guo, Qiang; Li, Yang; Liu, Jian-Guo

2013-05-01

The process of heat conduction (HC) has recently found application in the information filtering [Zhang et al., Phys. Rev. Lett.99, 154301 (2007)], which is of high diversity but low accuracy. The classical HC model predicts users' potential interested objects based on their interesting objects regardless to the negative opinions. In terms of the users' rating scores, we present an improved user-based HC (UHC) information model by taking into account users' positive and negative opinions. Firstly, the objects rated by users are divided into positive and negative categories, then the predicted interesting and dislike object lists are generated by the UHC model. Finally, the recommendation lists are constructed by filtering out the dislike objects from the interesting lists. By implementing the new model based on nine similarity measures, the experimental results for MovieLens and Netflix datasets show that the new model considering negative opinions could greatly enhance the accuracy, measured by the average ranking score, from 0.049 to 0.036 for Netflix and from 0.1025 to 0.0570 for Movielens dataset, reduced by 26.53% and 44.39%, respectively. Since users prefer to give positive ratings rather than negative ones, the negative opinions contain much more information than the positive ones, the negative opinions, therefore, are very important for understanding users' online collective behaviors and improving the performance of HC model.

Users matter : multi-agent systems model of high performance computing cluster users.

DOE Office of Scientific and Technical Information (OSTI.GOV)

North, M. J.; Hood, C. S.; Decision and Information Sciences

2005-01-01

High performance computing clusters have been a critical resource for computational science for over a decade and have more recently become integral to large-scale industrial analysis. Despite their well-specified components, the aggregate behavior of clusters is poorly understood. The difficulties arise from complicated interactions between cluster components during operation. These interactions have been studied by many researchers, some of whom have identified the need for holistic multi-scale modeling that simultaneously includes network level, operating system level, process level, and user level behaviors. Each of these levels presents its own modeling challenges, but the user level is the most complex duemore » to the adaptability of human beings. In this vein, there are several major user modeling goals, namely descriptive modeling, predictive modeling and automated weakness discovery. This study shows how multi-agent techniques were used to simulate a large-scale computing cluster at each of these levels.« less

A review of game-theoretic models of road user behaviour.

PubMed

Elvik, Rune

2014-01-01

This paper reviews game-theoretic models that have been developed to explain road user behaviour in situations where road users interact with each other. The paper includes the following game-theoretic models: 1.A general model of the interaction between road users and their possible reaction to measures improving safety (behavioural adaptation).2.Choice of vehicle size as a Prisoners’ dilemma game.3.Speed choice as a co-ordination game.4.Speed compliance as a game between drivers and the police.5.Merging into traffic from an acceleration lane as a mixed-strategy game.6.Choice of level of attention in following situations as an evolutionary game.7.Choice of departure time to avoid congestion as variant of a Prisoners’ dilemma game.8.Interaction between cyclists crossing the road and car drivers.9.Dipping headlights at night well ahead of the point when glare becomes noticeable.10.Choice of evasive action in a situation when cars are on collision course. The models reviewed are different in many respects, but a common feature of the models is that they can explain how informal norms of behaviour can develop among road users and be sustained even if these informal norms violate the formal regulations of the traffic code. Game-theoretic models are not applicable to every conceivable interaction between road users or to situations in which road users choose behaviour without interacting with other road users. Nevertheless, it is likely that game-theoretic models can be applied more widely than they have been until now. Copyright © 2013 Elsevier Ltd. All rights reserved.

Shuttle operations simulation model programmers'/users' manual

NASA Technical Reports Server (NTRS)

Porter, D. G.

1972-01-01

The prospective user of the shuttle operations simulation (SOS) model is given sufficient information to enable him to perform simulation studies of the space shuttle launch-to-launch operations cycle. The procedures used for modifying the SOS model to meet user requirements are described. The various control card sequences required to execute the SOS model are given. The report is written for users with varying computer simulation experience. A description of the components of the SOS model is included that presents both an explanation of the logic involved in the simulation of the shuttle operations cycle and a description of the routines used to support the actual simulation.

Modeling erosion under future climates with the WEPP model

Treesearch

Timothy Bayley; William Elliot; Mark A. Nearing; D. Phillp Guertin; Thomas Johnson; David Goodrich; Dennis Flanagan

2010-01-01

The Water Erosion Prediction Project Climate Assessment Tool (WEPPCAT) was developed to be an easy-to-use, web-based erosion model that allows users to adjust climate inputs for user-specified climate scenarios. WEPPCAT allows the user to modify monthly mean climate parameters, including maximum and minimum temperatures, number of wet days, precipitation, and...

SWATMOD-PREP: Graphical user interface for preparing coupled SWAT-modflow simulations

USDA-ARS?s Scientific Manuscript database

This paper presents SWATMOD-Prep, a graphical user interface that couples a SWAT watershed model with a MODFLOW groundwater flow model. The interface is based on a recently published SWAT-MODFLOW code that couples the models via mapping schemes. The spatial layout of SWATMOD-Prep guides the user t...

A simplistic model for identifying prominent web users in directed multiplex social networks: a case study using Twitter networks

NASA Astrophysics Data System (ADS)

Loucif, Hemza; Boubetra, Abdelhak; Akrouf, Samir

2016-10-01

This paper aims to describe a new simplistic model dedicated to gauge the online influence of Twitter users based on a mixture of structural and interactional features. The model is an additive mathematical formulation which involves two main parts. The first part serves to measure the influence of the Twitter user on just his neighbourhood covering his followers. However, the second part evaluates the potential influence of the Twitter user beyond the circle of his followers. Particularly, it measures the likelihood that the tweets of the Twitter user will spread further within the social graph through the retweeting process. The model is tested on a data set involving four kinds of real-world egocentric networks. The empirical results reveal that an active ordinary user is more prominent than a non-active celebrity one. A simple comparison is conducted between the proposed model and two existing simplistic approaches. The results show that our model generates the most realistic influence scores due to its dealing with both explicit (structural and interactional) and implicit features.

A Driving Behaviour Model of Electrical Wheelchair Users

PubMed Central

Hamam, Y.; Djouani, K.; Daachi, B.; Steyn, N.

2016-01-01

In spite of the presence of powered wheelchairs, some of the users still experience steering challenges and manoeuvring difficulties that limit their capacity of navigating effectively. For such users, steering support and assistive systems may be very necessary. To appreciate the assistance, there is need that the assistive control is adaptable to the user's steering behaviour. This paper contributes to wheelchair steering improvement by modelling the steering behaviour of powered wheelchair users, for integration into the control system. More precisely, the modelling is based on the improved Directed Potential Field (DPF) method for trajectory planning. The method has facilitated the formulation of a simple behaviour model that is also linear in parameters. To obtain the steering data for parameter identification, seven individuals participated in driving the wheelchair in different virtual worlds on the augmented platform. The obtained data facilitated the estimation of user parameters, using the ordinary least square method, with satisfactory regression analysis results. PMID:27148362

Statistical modeling for visualization evaluation through data fusion.

PubMed

Chen, Xiaoyu; Jin, Ran

2017-11-01

There is a high demand of data visualization providing insights to users in various applications. However, a consistent, online visualization evaluation method to quantify mental workload or user preference is lacking, which leads to an inefficient visualization and user interface design process. Recently, the advancement of interactive and sensing technologies makes the electroencephalogram (EEG) signals, eye movements as well as visualization logs available in user-centered evaluation. This paper proposes a data fusion model and the application procedure for quantitative and online visualization evaluation. 15 participants joined the study based on three different visualization designs. The results provide a regularized regression model which can accurately predict the user's evaluation of task complexity, and indicate the significance of all three types of sensing data sets for visualization evaluation. This model can be widely applied to data visualization evaluation, and other user-centered designs evaluation and data analysis in human factors and ergonomics. Copyright © 2016 Elsevier Ltd. All rights reserved.

Jobs and Economic Development Impact (JEDI) Model Geothermal User Reference Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Johnson, C.; Augustine, C.; Goldberg, M.

2012-09-01

The Geothermal Jobs and Economic Development Impact (JEDI) model, developed through the National Renewable Energy Laboratory (NREL), is an Excel-based user-friendly tools that estimates the economic impacts of constructing and operating hydrothermal and Enhanced Geothermal System (EGS) power generation projects at the local level for a range of conventional and renewable energy technologies. The JEDI Model Geothermal User Reference Guide was developed to assist users in using and understanding the model. This guide provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data utilized in the model. This guide alsomore » provides basic instruction on model add-in features, operation of the model, and a discussion of how the results should be interpreted.« less

Research on user behavior authentication model based on stochastic Petri nets

NASA Astrophysics Data System (ADS)

Zhang, Chengyuan; Xu, Haishui

2017-08-01

A behavioural authentication model based on stochastic Petri net is proposed to meet the randomness, uncertainty and concurrency characteristics of user behaviour. The use of random models in the location, changes, arc and logo to describe the characteristics of a variety of authentication and game relationships, so as to effectively implement the graphical user behaviour authentication model analysis method, according to the corresponding proof to verify the model is valuable.

Bringing a Realistic Global Climate Modeling Experience to a Broader Audience

NASA Astrophysics Data System (ADS)

Sohl, L. E.; Chandler, M. A.; Zhou, J.

2010-12-01

EdGCM, the Educational Global Climate Model, was developed with the goal of helping students learn about climate change and climate modeling by giving them the ability to run a genuine NASA global climate model (GCM) on a desktop computer. Since EdGCM was first publicly released in January 2005, tens of thousands of users on seven continents have downloaded the software. EdGCM has been utilized by climate science educators from middle school through graduate school levels, and on occasion even by researchers who otherwise do not have ready access to climate model at national labs in the U.S. and elsewhere. The EdGCM software is designed to walk users through the same process a climate scientist would use in designing and running simulations, and analyzing and visualizing GCM output. Although the current interface design gives users a clear view of some of the complexities involved in using a climate model, it can be daunting for users whose main focus is on climate science rather than modeling per se. As part of the work funded by NASA’s Global Climate Change Education (GCCE) program, we will begin modifications to the user interface that will improve the accessibility of EdGCM to a wider array of users, especially at the middle school and high school levels, by: 1) Developing an automated approach (a “wizard”) to simplify the user experience in setting up new climate simulations; 2) Produce a catalog of “rediscovery experiments” that allow users to reproduce published climate model results, and in some cases compare model projections to real world data; and 3) Enhance distance learning and online learning opportunities through the development of a web-based interface. The prototypes for these modifications will then be presented to educators belonging to an EdGCM Users Group for feedback, so that we can further refine the EdGCM software, and thus deliver the tools and materials educators want and need across a wider range of learning environments.

Model Description and Proposed Application for the Enlisted Personnel Inventory, Cost, and Compensation Model

DTIC Science & Technology

1994-07-01

provide additional information for the user / policy analyst: Eichers, D., Sola, M., McLernan, G., EPICC User’s Manual , Systems Research and Applications...maintenance, and a set of on-line help screens. Each are further discussed below and a full discussion is included in the EPICC User’s Manual . Menu Based...written documentation (user’s manual ) that will be provided with the model. 55 The next chapter discusses the validation of the inventory projection and

[Testing a Model to Predict Problem Gambling in Speculative Game Users].

PubMed

Park, Hyangjin; Kim, Suk Sun

2018-04-01

The purpose of the study was to develop and test a model for predicting problem gambling in speculative game users based on Blaszczynski and Nower's pathways model of problem and pathological gambling. The participants were 262 speculative game users recruited from seven speculative gambling places located in Seoul, Gangwon, and Gyeonggi, Korea. They completed a structured self-report questionnaire comprising measures of problem gambling, negative emotions, attentional impulsivity, motor impulsivity, non-planning impulsivity, gambler's fallacy, and gambling self-efficacy. Structural Equation Modeling was used to test the hypothesized model and to examine the direct and indirect effects on problem gambling in speculative game users using SPSS 22.0 and AMOS 20.0 programs. The hypothetical research model provided a reasonable fit to the data. Negative emotions, motor impulsivity, gambler's fallacy, and gambling self-efficacy had direct effects on problem gambling in speculative game users, while indirect effects were reported for negative emotions, motor impulsivity, and gambler's fallacy. These predictors explained 75.2% problem gambling in speculative game users. The findings suggest that developing intervention programs to reduce negative emotions, motor impulsivity, and gambler's fallacy, and to increase gambling self-efficacy in speculative game users are needed to prevent their problem gambling. © 2018 Korean Society of Nursing Science.

User Interaction Modeling and Profile Extraction in Interactive Systems: A Groupware Application Case Study †

PubMed Central

Tîrnăucă, Cristina; Duque, Rafael; Montaña, José L.

2017-01-01

A relevant goal in human–computer interaction is to produce applications that are easy to use and well-adjusted to their users’ needs. To address this problem it is important to know how users interact with the system. This work constitutes a methodological contribution capable of identifying the context of use in which users perform interactions with a groupware application (synchronous or asynchronous) and provides, using machine learning techniques, generative models of how users behave. Additionally, these models are transformed into a text that describes in natural language the main characteristics of the interaction of the users with the system. PMID:28726762

Intelligent Context-Aware and Adaptive Interface for Mobile LBS

PubMed Central

Liu, Yanhong

2015-01-01

Context-aware user interface plays an important role in many human-computer Interaction tasks of location based services. Although spatial models for context-aware systems have been studied extensively, how to locate specific spatial information for users is still not well resolved, which is important in the mobile environment where location based services users are impeded by device limitations. Better context-aware human-computer interaction models of mobile location based services are needed not just to predict performance outcomes, such as whether people will be able to find the information needed to complete a human-computer interaction task, but to understand human processes that interact in spatial query, which will in turn inform the detailed design of better user interfaces in mobile location based services. In this study, a context-aware adaptive model for mobile location based services interface is proposed, which contains three major sections: purpose, adjustment, and adaptation. Based on this model we try to describe the process of user operation and interface adaptation clearly through the dynamic interaction between users and the interface. Then we show how the model applies users' demands in a complicated environment and suggested the feasibility by the experimental results. PMID:26457077

Determinants of user satisfaction with a Clinical Information System.

PubMed

Palm, Jean-Marc; Colombet, Isabelle; Sicotte, Claude; Degoulet, Patrice

2006-01-01

Clinical Information Systems (CIS) implementation has faced user resistance. Consequently, we aimed to assess the acceptability of an integrated CIS. We designed an electronic survey instrument from two theoretical models (Delone and McLean, and Technology Acceptance Model). Dimensions hypothesized to be determinant of user satisfaction were: user characteristics, CIS use, quality, usefulness, and service quality. The questionnaire was administered to physicians, nurses and medical secretaries of the Georges Pompidou university Hospital (HEGP) in Paris. Answers were obtained from 324 users (93 physicians, 174 nurses, and 57 secretaries). Cronbach's alpha coefficients showed a correct reliability within each dimension. Secretaries and nurses were more satisfied with the CIS than physicians. Except for CIS use, after adjustment for confounders, female gender, perceived CIS quality, usefulness, and service quality were strongly correlated with user satisfaction. This study reinforces the necessity of several models and dimensions to evaluate the acceptability of a complex CIS, with a specific approach for different user profiles.

Development and evaluation of nursing user interface screens using multiple methods.

PubMed

Hyun, Sookyung; Johnson, Stephen B; Stetson, Peter D; Bakken, Suzanne

2009-12-01

Building upon the foundation of the Structured Narrative Electronic Health Record (EHR) model, we applied theory-based (combined Technology Acceptance Model and Task-Technology Fit Model) and user-centered methods to explore nurses' perceptions of functional requirements for an electronic nursing documentation system, design user interface screens reflective of the nurses' perspectives, and assess nurses' perceptions of the usability of the prototype user interface screens. The methods resulted in user interface screens that were perceived to be easy to use, potentially useful, and well-matched to nursing documentation tasks associated with Nursing Admission Assessment, Blood Administration, and Nursing Discharge Summary. The methods applied in this research may serve as a guide for others wishing to implement user-centered processes to develop or extend EHR systems. In addition, some of the insights obtained in this study may be informative to the development of safe and efficient user interface screens for nursing document templates in EHRs.

User Acceptance of Long-Term Evolution (LTE) Services: An Application of Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Park, Eunil; Kim, Ki Joon

2013-01-01

Purpose: The aim of this paper is to propose an integrated path model in order to explore user acceptance of long-term evolution (LTE) services by examining potential causal relationships between key psychological factors and user intention to use the services. Design/methodology/approach: Online survey data collected from 1,344 users are analysed…

Mental health service user participation in Chinese culture: a model of independence or interdependence?

PubMed

Tang, Jessica Pui-Shan; Tse, Samson Shu-Ki; Davidson, Larry; Cheng, Patrick

2017-12-22

Current models of user participation in mental health services were developed within Western culture and thus may not be applicable to Chinese communities. To present a new model of user participation, which emerged from research within a Chinese community, for understanding the processes of and factors influencing user participation in a non-Western culture. Multiple qualitative methods, including focus groups, individual in-depth interviews, and photovoice, were applied within the framework of constructivist grounded theory and collaborative research. Diverging from conceptualizations of user participation with emphasis on civil rights and the individual as a central agent, participants in the study highlighted the interpersonal dynamics between service users and different players affecting the participation intensity and outcomes. They valued a reciprocal relationship with their caregivers in making treatment decisions, cooperated with staff to observe power hierarchies and social harmony, identified the importance of peer support in enabling service engagement and delivery, and emphasized professional facilitation in advancing involvement at the policy level. User participation in Chinese culture embeds dynamic interdependence. The proposed model adds this new dimension to the existing frameworks and calls for attention to the complex local ecology and cultural consistency in realizing user participation.

Study of data collection platform concepts: Data collection system user requirements

NASA Technical Reports Server (NTRS)

1973-01-01

The overall purpose of the survey was to provide real world data on user requirements. The intent was to assess data collection system user requirements by questioning actual potential users rather than speculating on requirements. The end results of the survey are baseline requirements models for both a data collection platform and a data collection system. These models were derived from the survey results. The real value of these models lies in the fact that they are based on actual user requirements as delineated in the survey questionnaires. Some users desire data collection platforms of small size and light weight. These sizes and weights are beyond the present state of the art. Also, the survey provided a wealth of information on the nature and constituency of the data collection user community as well as information on user applications for data collection systems. Finally, the data sheds light on the generalized platform concept. That is, the diversity of user requirements shown in the data indicates the difficulty that can be anticipated in attempting to implement such a concept.

Satellite services system analysis study. Volume 2: Satellite and services user model

NASA Technical Reports Server (NTRS)

1981-01-01

Satellite services needs are analyzed. Topics include methodology: a satellite user model; representative servicing scenarios; potential service needs; manned, remote, and automated involvement; and inactive satellites/debris. Satellite and services user model development is considered. Groundrules and assumptions, servicing, events, and sensitivity analysis are included. Selection of references satellites is also discussed.

Detecting Rumors Through Modeling Information Propagation Networks in a Social Media Environment.

PubMed

Liu, Yang; Xu, Songhua; Tourassi, Georgia

2015-01-01

In the midst of today's pervasive influence of social media content and activities, information credibility has increasingly become a major issue. Accordingly, identifying false information, e.g. rumors circulated in social media environments, attracts expanding research attention and growing interests. Many previous studies have exploited user-independent features for rumor detection. These prior investigations uniformly treat all users relevant to the propagation of a social media message as instances of a generic entity. Such a modeling approach usually adopts a homogeneous network to represent all users, the practice of which ignores the variety across an entire user population in a social media environment. Recognizing this limitation of modeling methodologies, this study explores user-specific features in a social media environment for rumor detection. The new approach hypothesizes that whether a user tends to spread a rumor is dependent upon specific attributes of the user in addition to content characteristics of the message itself. Under this hypothesis, information propagation patterns of rumors versus those of credible messages in a social media environment are systematically differentiable. To explore and exploit this hypothesis, we develop a new information propagation model based on a heterogeneous user representation for rumor recognition. The new approach is capable of differentiating rumors from credible messages through observing distinctions in their respective propagation patterns in social media. Experimental results show that the new information propagation model based on heterogeneous user representation can effectively distinguish rumors from credible social media content.

Automatic Classification of Users' Health Information Need Context: Logistic Regression Analysis of Mouse-Click and Eye-Tracker Data.

PubMed

Pian, Wenjing; Khoo, Christopher Sg; Chi, Jianxing

2017-12-21

Users searching for health information on the Internet may be searching for their own health issue, searching for someone else's health issue, or browsing with no particular health issue in mind. Previous research has found that these three categories of users focus on different types of health information. However, most health information websites provide static content for all users. If the three types of user health information need contexts can be identified by the Web application, the search results or information offered to the user can be customized to increase its relevance or usefulness to the user. The aim of this study was to investigate the possibility of identifying the three user health information contexts (searching for self, searching for others, or browsing with no particular health issue in mind) using just hyperlink clicking behavior; using eye-tracking information; and using a combination of eye-tracking, demographic, and urgency information. Predictive models are developed using multinomial logistic regression. A total of 74 participants (39 females and 35 males) who were mainly staff and students of a university were asked to browse a health discussion forum, Healthboards.com. An eye tracker recorded their examining (eye fixation) and skimming (quick eye movement) behaviors on 2 types of screens: summary result screen displaying a list of post headers, and detailed post screen. The following three types of predictive models were developed using logistic regression analysis: model 1 used only the time spent in scanning the summary result screen and reading the detailed post screen, which can be determined from the user's mouse clicks; model 2 used the examining and skimming durations on each screen, recorded by an eye tracker; and model 3 added user demographic and urgency information to model 2. An analysis of variance (ANOVA) analysis found that users' browsing durations were significantly different for the three health information contexts (P<.001). The logistic regression model 3 was able to predict the user's type of health information context with a 10-fold cross validation mean accuracy of 84% (62/74), followed by model 2 at 73% (54/74) and model 1 at 71% (52/78). In addition, correlation analysis found that particular browsing durations were highly correlated with users' age, education level, and the urgency of their information need. A user's type of health information need context (ie, searching for self, for others, or with no health issue in mind) can be identified with reasonable accuracy using just user mouse clicks that can easily be detected by Web applications. Higher accuracy can be obtained using Google glass or future computing devices with eye tracking function. ©Wenjing Pian, Christopher SG Khoo, Jianxing Chi. Originally published in the Journal of Medical Internet Research (http://www.jmir.org), 21.12.2017.

Review of Soil Models and Their Implementation in Multibody System Algorithms

DTIC Science & Technology

2012-02-01

models for use with ABAQUS . The constitutive models of the user defined materials can be programmed in the user subroutine UMAT. Many user defined...mechanical characteristics of mildly or moderately expansive unsaturated soils. As originally proposed by Alonso, utilizing a critical state framework...review of some of these programs is presented. ABAQUS ABAQUS is a popular FE analysis program that contains a wide variety of material models and

Dynamic Distribution and Layouting of Model-Based User Interfaces in Smart Environments

NASA Astrophysics Data System (ADS)

Roscher, Dirk; Lehmann, Grzegorz; Schwartze, Veit; Blumendorf, Marco; Albayrak, Sahin

The developments in computer technology in the last decade change the ways of computer utilization. The emerging smart environments make it possible to build ubiquitous applications that assist users during their everyday life, at any time, in any context. But the variety of contexts-of-use (user, platform and environment) makes the development of such ubiquitous applications for smart environments and especially its user interfaces a challenging and time-consuming task. We propose a model-based approach, which allows adapting the user interface at runtime to numerous (also unknown) contexts-of-use. Based on a user interface modelling language, defining the fundamentals and constraints of the user interface, a runtime architecture exploits the description to adapt the user interface to the current context-of-use. The architecture provides automatic distribution and layout algorithms for adapting the applications also to contexts unforeseen at design time. Designers do not specify predefined adaptations for each specific situation, but adaptation constraints and guidelines. Furthermore, users are provided with a meta user interface to influence the adaptations according to their needs. A smart home energy management system serves as running example to illustrate the approach.

A tool for multi-scale modelling of the renal nephron

PubMed Central

Nickerson, David P.; Terkildsen, Jonna R.; Hamilton, Kirk L.; Hunter, Peter J.

2011-01-01

We present the development of a tool, which provides users with the ability to visualize and interact with a comprehensive description of a multi-scale model of the renal nephron. A one-dimensional anatomical model of the nephron has been created and is used for visualization and modelling of tubule transport in various nephron anatomical segments. Mathematical models of nephron segments are embedded in the one-dimensional model. At the cellular level, these segment models use models encoded in CellML to describe cellular and subcellular transport kinetics. A web-based presentation environment has been developed that allows the user to visualize and navigate through the multi-scale nephron model, including simulation results, at the different spatial scales encompassed by the model description. The Zinc extension to Firefox is used to provide an interactive three-dimensional view of the tubule model and the native Firefox rendering of scalable vector graphics is used to present schematic diagrams for cellular and subcellular scale models. The model viewer is embedded in a web page that dynamically presents content based on user input. For example, when viewing the whole nephron model, the user might be presented with information on the various embedded segment models as they select them in the three-dimensional model view. Alternatively, the user chooses to focus the model viewer on a cellular model located in a particular nephron segment in order to view the various membrane transport proteins. Selecting a specific protein may then present the user with a description of the mathematical model governing the behaviour of that protein—including the mathematical model itself and various simulation experiments used to validate the model against the literature. PMID:22670210

DockoMatic 2.0: high throughput inverse virtual screening and homology modeling.

PubMed

Bullock, Casey; Cornia, Nic; Jacob, Reed; Remm, Andrew; Peavey, Thomas; Weekes, Ken; Mallory, Chris; Oxford, Julia T; McDougal, Owen M; Andersen, Timothy L

2013-08-26

DockoMatic is a free and open source application that unifies a suite of software programs within a user-friendly graphical user interface (GUI) to facilitate molecular docking experiments. Here we describe the release of DockoMatic 2.0; significant software advances include the ability to (1) conduct high throughput inverse virtual screening (IVS); (2) construct 3D homology models; and (3) customize the user interface. Users can now efficiently setup, start, and manage IVS experiments through the DockoMatic GUI by specifying receptor(s), ligand(s), grid parameter file(s), and docking engine (either AutoDock or AutoDock Vina). DockoMatic automatically generates the needed experiment input files and output directories and allows the user to manage and monitor job progress. Upon job completion, a summary of results is generated by Dockomatic to facilitate interpretation by the user. DockoMatic functionality has also been expanded to facilitate the construction of 3D protein homology models using the Timely Integrated Modeler (TIM) wizard. The wizard TIM provides an interface that accesses the basic local alignment search tool (BLAST) and MODELER programs and guides the user through the necessary steps to easily and efficiently create 3D homology models for biomacromolecular structures. The DockoMatic GUI can be customized by the user, and the software design makes it relatively easy to integrate additional docking engines, scoring functions, or third party programs. DockoMatic is a free comprehensive molecular docking software program for all levels of scientists in both research and education.

An Interactive Tool For Semi-automated Statistical Prediction Using Earth Observations and Models

NASA Astrophysics Data System (ADS)

Zaitchik, B. F.; Berhane, F.; Tadesse, T.

2015-12-01

We developed a semi-automated statistical prediction tool applicable to concurrent analysis or seasonal prediction of any time series variable in any geographic location. The tool was developed using Shiny, JavaScript, HTML and CSS. A user can extract a predictand by drawing a polygon over a region of interest on the provided user interface (global map). The user can select the Climatic Research Unit (CRU) precipitation or Climate Hazards Group InfraRed Precipitation with Station data (CHIRPS) as predictand. They can also upload their own predictand time series. Predictors can be extracted from sea surface temperature, sea level pressure, winds at different pressure levels, air temperature at various pressure levels, and geopotential height at different pressure levels. By default, reanalysis fields are applied as predictors, but the user can also upload their own predictors, including a wide range of compatible satellite-derived datasets. The package generates correlations of the variables selected with the predictand. The user also has the option to generate composites of the variables based on the predictand. Next, the user can extract predictors by drawing polygons over the regions that show strong correlations (composites). Then, the user can select some or all of the statistical prediction models provided. Provided models include Linear Regression models (GLM, SGLM), Tree-based models (bagging, random forest, boosting), Artificial Neural Network, and other non-linear models such as Generalized Additive Model (GAM) and Multivariate Adaptive Regression Splines (MARS). Finally, the user can download the analysis steps they used, such as the region they selected, the time period they specified, the predictand and predictors they chose and preprocessing options they used, and the model results in PDF or HTML format. Key words: Semi-automated prediction, Shiny, R, GLM, ANN, RF, GAM, MARS

TopoDrive and ParticleFlow--Two Computer Models for Simulation and Visualization of Ground-Water Flow and Transport of Fluid Particles in Two Dimensions

USGS Publications Warehouse

Hsieh, Paul A.

2001-01-01

This report serves as a user?s guide for two computer models: TopoDrive and ParticleFlow. These two-dimensional models are designed to simulate two ground-water processes: topography-driven flow and advective transport of fluid particles. To simulate topography-driven flow, the user may specify the shape of the water table, which bounds the top of the vertical flow section. To simulate transport of fluid particles, the model domain is a rectangle with overall flow from left to right. In both cases, the flow is under steady state, and the distribution of hydraulic conductivity may be specified by the user. The models compute hydraulic head, ground-water flow paths, and the movement of fluid particles. An interactive visual interface enables the user to easily and quickly explore model behavior, and thereby better understand ground-water flow processes. In this regard, TopoDrive and ParticleFlow are not intended to be comprehensive modeling tools, but are designed for modeling at the exploratory or conceptual level, for visual demonstration, and for educational purposes.

UTOPIAN: user-driven topic modeling based on interactive nonnegative matrix factorization.

PubMed

Choo, Jaegul; Lee, Changhyun; Reddy, Chandan K; Park, Haesun

2013-12-01

Topic modeling has been widely used for analyzing text document collections. Recently, there have been significant advancements in various topic modeling techniques, particularly in the form of probabilistic graphical modeling. State-of-the-art techniques such as Latent Dirichlet Allocation (LDA) have been successfully applied in visual text analytics. However, most of the widely-used methods based on probabilistic modeling have drawbacks in terms of consistency from multiple runs and empirical convergence. Furthermore, due to the complicatedness in the formulation and the algorithm, LDA cannot easily incorporate various types of user feedback. To tackle this problem, we propose a reliable and flexible visual analytics system for topic modeling called UTOPIAN (User-driven Topic modeling based on Interactive Nonnegative Matrix Factorization). Centered around its semi-supervised formulation, UTOPIAN enables users to interact with the topic modeling method and steer the result in a user-driven manner. We demonstrate the capability of UTOPIAN via several usage scenarios with real-world document corpuses such as InfoVis/VAST paper data set and product review data sets.

Bilinear modeling of EMG signals to extract user-independent features for multiuser myoelectric interface.

PubMed

Matsubara, Takamitsu; Morimoto, Jun

2013-08-01

In this study, we propose a multiuser myoelectric interface that can easily adapt to novel users. When a user performs different motions (e.g., grasping and pinching), different electromyography (EMG) signals are measured. When different users perform the same motion (e.g., grasping), different EMG signals are also measured. Therefore, designing a myoelectric interface that can be used by multiple users to perform multiple motions is difficult. To cope with this problem, we propose for EMG signals a bilinear model that is composed of two linear factors: 1) user dependent and 2) motion dependent. By decomposing the EMG signals into these two factors, the extracted motion-dependent factors can be used as user-independent features. We can construct a motion classifier on the extracted feature space to develop the multiuser interface. For novel users, the proposed adaptation method estimates the user-dependent factor through only a few interactions. The bilinear EMG model with the estimated user-dependent factor can extract the user-independent features from the novel user data. We applied our proposed method to a recognition task of five hand gestures for robotic hand control using four-channel EMG signals measured from subject forearms. Our method resulted in 73% accuracy, which was statistically significantly different from the accuracy of standard nonmultiuser interfaces, as the result of a two-sample t -test at a significance level of 1%.

DIRT: The Dust InfraRed Toolbox

NASA Astrophysics Data System (ADS)

Pound, M. W.; Wolfire, M. G.; Mundy, L. G.; Teuben, P. J.; Lord, S.

We present DIRT, a Java applet geared toward modeling a variety of processes in envelopes of young and evolved stars. Users can automatically and efficiently search grids of pre-calculated models to fit their data. A large set of physical parameters and dust types are included in the model database, which contains over 500,000 models. The computing cluster for the database is described in the accompanying paper by Teuben et al. (2000). A typical user query will return about 50-100 models, which the user can then interactively filter as a function of 8 model parameters (e.g., extinction, size, flux, luminosity). A flexible, multi-dimensional plotter (Figure 1) allows users to view the models, rotate them, tag specific parameters with color or symbol size, and probe individual model points. For any given model, auxiliary plots such as dust grain properties, radial intensity profiles, and the flux as a function of wavelength and beamsize can be viewed. The user can fit observed data to several models simultaneously and see the results of the fit; the best fit is automatically selected for plotting. The URL for this project is http://dustem.astro.umd.edu.

a New Model for Fuzzy Personalized Route Planning Using Fuzzy Linguistic Preference Relation

NASA Astrophysics Data System (ADS)

Nadi, S.; Houshyaripour, A. H.

2017-09-01

This paper proposes a new model for personalized route planning under uncertain condition. Personalized routing, involves different sources of uncertainty. These uncertainties can be raised from user's ambiguity about their preferences, imprecise criteria values and modelling process. The proposed model uses Fuzzy Linguistic Preference Relation Analytical Hierarchical Process (FLPRAHP) to analyse user's preferences under uncertainty. Routing is a multi-criteria task especially in transportation networks, where the users wish to optimize their routes based on different criteria. However, due to the lake of knowledge about the preferences of different users and uncertainties available in the criteria values, we propose a new personalized fuzzy routing method based on the fuzzy ranking using center of gravity. The model employed FLPRAHP method to aggregate uncertain criteria values regarding uncertain user's preferences while improve consistency with least possible comparisons. An illustrative example presents the effectiveness and capability of the proposed model to calculate best personalize route under fuzziness and uncertainty.

Perspectives on User Satisfaction Surveys.

ERIC Educational Resources Information Center

Cullen, Rowena

2001-01-01

Discusses academic libraries, digital environments, increasing competition, the relationship between service quality and user satisfaction, and user surveys. Describes the SERVQUAL model that measures service quality and user satisfaction in academic libraries; considers gaps between user expectations and managers' perceptions of user…

A Neural Network Approach to Intention Modeling for User-Adapted Conversational Agents

PubMed Central

Griol, David

2016-01-01

Spoken dialogue systems have been proposed to enable a more natural and intuitive interaction with the environment and human-computer interfaces. In this contribution, we present a framework based on neural networks that allows modeling of the user's intention during the dialogue and uses this prediction to dynamically adapt the dialogue model of the system taking into consideration the user's needs and preferences. We have evaluated our proposal to develop a user-adapted spoken dialogue system that facilitates tourist information and services and provide a detailed discussion of the positive influence of our proposal in the success of the interaction, the information and services provided, and the quality perceived by the users. PMID:26819592

Human-Computer Interaction in Tactical Operations: Designing for Effective Human-Computer Dialogue

DTIC Science & Technology

1990-09-01

developing re-usable interface software. Furthermore, steps can be taken toward standardization, and the specifier may be able to take on an increased...The semantic level deals with the meaning of the dialogue to the user. The user has a "point of view" or a " mental model" which provides a context for...information may not occur. As shown in Figure 3-4, the user’s mental model is termed the USER MODEL (Norman and Draper, 1986, p. 47). The programmer’s

User-Adapted Recommendation of Content on Mobile Devices Using Bayesian Networks

NASA Astrophysics Data System (ADS)

Iwasaki, Hirotoshi; Mizuno, Nobuhiro; Hara, Kousuke; Motomura, Yoichi

Mobile devices, such as cellular phones and car navigation systems, are essential to daily life. People acquire necessary information and preferred content over communication networks anywhere, anytime. However, usability issues arise from the simplicity of user interfaces themselves. Thus, a recommendation of content that is adapted to a user's preference and situation will help the user select content. In this paper, we describe a method to realize such a system using Bayesian networks. This user-adapted mobile system is based on a user model that provides recommendation of content (i.e., restaurants, shops, and music that are suitable to the user and situation) and that learns incrementally based on accumulated usage history data. However, sufficient samples are not always guaranteed, since a user model would require combined dependency among users, situations, and contents. Therefore, we propose the LK method for modeling, which complements incomplete and insufficient samples using knowledge data, and CPT incremental learning for adaptation based on a small number of samples. In order to evaluate the methods proposed, we applied them to restaurant recommendations made on car navigation systems. The evaluation results confirmed that our model based on the LK method can be expected to provide better generalization performance than that of the conventional method. Furthermore, our system would require much less operation than current car navigation systems from the beginning of use. Our evaluation results also indicate that learning a user's individual preference through CPT incremental learning would be beneficial to many users, even with only a few samples. As a result, we have developed the technology of a system that becomes more adapted to a user the more it is used.

wayGoo recommender system: personalized recommendations for events scheduling, based on static and real-time information

NASA Astrophysics Data System (ADS)

Thanos, Konstantinos-Georgios; Thomopoulos, Stelios C. A.

2016-05-01

wayGoo is a fully functional application whose main functionalities include content geolocation, event scheduling, and indoor navigation. However, significant information about events do not reach users' attention, either because of the size of this information or because some information comes from real - time data sources. The purpose of this work is to facilitate event management operations by prioritizing the presented events, based on users' interests using both, static and real - time data. Through the wayGoo interface, users select conceptual topics that are interesting for them. These topics constitute a browsing behavior vector which is used for learning users' interests implicitly, without being intrusive. Then, the system estimates user preferences and return an events list sorted from the most preferred one to the least. User preferences are modeled via a Naïve Bayesian Network which consists of: a) the `decision' random variable corresponding to users' decision on attending an event, b) the `distance' random variable, modeled by a linear regression that estimates the probability that the distance between a user and each event destination is not discouraging, ` the seat availability' random variable, modeled by a linear regression, which estimates the probability that the seat availability is encouraging d) and the `relevance' random variable, modeled by a clustering - based collaborative filtering, which determines the relevance of each event users' interests. Finally, experimental results show that the proposed system contribute essentially to assisting users in browsing and selecting events to attend.

Enhancing Transparency and Control When Drawing Data-Driven Inferences About Individuals.

PubMed

Chen, Daizhuo; Fraiberger, Samuel P; Moakler, Robert; Provost, Foster

2017-09-01

Recent studies show the remarkable power of fine-grained information disclosed by users on social network sites to infer users' personal characteristics via predictive modeling. Similar fine-grained data are being used successfully in other commercial applications. In response, attention is turning increasingly to the transparency that organizations provide to users as to what inferences are drawn and why, as well as to what sort of control users can be given over inferences that are drawn about them. In this article, we focus on inferences about personal characteristics based on information disclosed by users' online actions. As a use case, we explore personal inferences that are made possible from "Likes" on Facebook. We first present a means for providing transparency into the information responsible for inferences drawn by data-driven models. We then introduce the "cloaking device"-a mechanism for users to inhibit the use of particular pieces of information in inference. Using these analytical tools we ask two main questions: (1) How much information must users cloak to significantly affect inferences about their personal traits? We find that usually users must cloak only a small portion of their actions to inhibit inference. We also find that, encouragingly, false-positive inferences are significantly easier to cloak than true-positive inferences. (2) Can firms change their modeling behavior to make cloaking more difficult? The answer is a definitive yes. We demonstrate a simple modeling change that requires users to cloak substantially more information to affect the inferences drawn. The upshot is that organizations can provide transparency and control even into complicated, predictive model-driven inferences, but they also can make control easier or harder for their users.

Enhancing Transparency and Control When Drawing Data-Driven Inferences About Individuals

PubMed Central

Chen, Daizhuo; Fraiberger, Samuel P.; Moakler, Robert; Provost, Foster

2017-01-01

Abstract Recent studies show the remarkable power of fine-grained information disclosed by users on social network sites to infer users' personal characteristics via predictive modeling. Similar fine-grained data are being used successfully in other commercial applications. In response, attention is turning increasingly to the transparency that organizations provide to users as to what inferences are drawn and why, as well as to what sort of control users can be given over inferences that are drawn about them. In this article, we focus on inferences about personal characteristics based on information disclosed by users' online actions. As a use case, we explore personal inferences that are made possible from “Likes” on Facebook. We first present a means for providing transparency into the information responsible for inferences drawn by data-driven models. We then introduce the “cloaking device”—a mechanism for users to inhibit the use of particular pieces of information in inference. Using these analytical tools we ask two main questions: (1) How much information must users cloak to significantly affect inferences about their personal traits? We find that usually users must cloak only a small portion of their actions to inhibit inference. We also find that, encouragingly, false-positive inferences are significantly easier to cloak than true-positive inferences. (2) Can firms change their modeling behavior to make cloaking more difficult? The answer is a definitive yes. We demonstrate a simple modeling change that requires users to cloak substantially more information to affect the inferences drawn. The upshot is that organizations can provide transparency and control even into complicated, predictive model-driven inferences, but they also can make control easier or harder for their users. PMID:28933942

The Modular Modeling System (MMS): User's Manual

USGS Publications Warehouse

Leavesley, G.H.; Restrepo, Pedro J.; Markstrom, S.L.; Dixon, M.; Stannard, L.G.

1996-01-01

The Modular Modeling System (MMS) is an integrated system of computer software that has been developed to provide the research and operational framework needed to support development, testing, and evaluation of physical-process algorithms and to facilitate integration of user-selected sets of algorithms into operational physical-process models. MMS uses a module library that contains modules for simulating a variety of water, energy, and biogeochemical processes. A model is created by selectively coupling the most appropriate modules from the library to create a 'suitable' model for the desired application. Where existing modules do not provide appropriate process algorithms, new modules can be developed. The MMS user's manual provides installation instructions and a detailed discussion of system concepts, module development, and model development and application using the MMS graphical user interface.

Two graphical user interfaces for managing and analyzing MODFLOW groundwater-model scenarios

USGS Publications Warehouse

Banta, Edward R.

2014-01-01

Scenario Manager and Scenario Analyzer are graphical user interfaces that facilitate the use of calibrated, MODFLOW-based groundwater models for investigating possible responses to proposed stresses on a groundwater system. Scenario Manager allows a user, starting with a calibrated model, to design and run model scenarios by adding or modifying stresses simulated by the model. Scenario Analyzer facilitates the process of extracting data from model output and preparing such display elements as maps, charts, and tables. Both programs are designed for users who are familiar with the science on which groundwater modeling is based but who may not have a groundwater modeler’s expertise in building and calibrating a groundwater model from start to finish. With Scenario Manager, the user can manipulate model input to simulate withdrawal or injection wells, time-variant specified hydraulic heads, recharge, and such surface-water features as rivers and canals. Input for stresses to be simulated comes from user-provided geographic information system files and time-series data files. A Scenario Manager project can contain multiple scenarios and is self-documenting. Scenario Analyzer can be used to analyze output from any MODFLOW-based model; it is not limited to use with scenarios generated by Scenario Manager. Model-simulated values of hydraulic head, drawdown, solute concentration, and cell-by-cell flow rates can be presented in display elements. Map data can be represented as lines of equal value (contours) or as a gradated color fill. Charts and tables display time-series data obtained from output generated by a transient-state model run or from user-provided text files of time-series data. A display element can be based entirely on output of a single model run, or, to facilitate comparison of results of multiple scenarios, an element can be based on output from multiple model runs. Scenario Analyzer can export display elements and supporting metadata as a Portable Document Format file.

Building Models in the Classroom: Taking Advantage of Sophisticated Geomorphic Numerical Tools Using a Simple Graphical User Interface

NASA Astrophysics Data System (ADS)

Roy, S. G.; Koons, P. O.; Gerbi, C. C.; Capps, D. K.; Tucker, G. E.; Rogers, Z. A.

2014-12-01

Sophisticated numerical tools exist for modeling geomorphic processes and linking them to tectonic and climatic systems, but they are often seen as inaccessible for users with an exploratory level of interest. We have improved the accessibility of landscape evolution models by producing a simple graphics user interface (GUI) that takes advantage of the Channel-Hillslope Integrated Landscape Development (CHILD) model. Model access is flexible: the user can edit values for basic geomorphic, tectonic, and climate parameters, or obtain greater control by defining the spatiotemporal distributions of those parameters. Users can make educated predictions by choosing their own parametric values for the governing equations and interpreting the results immediately through model graphics. This method of modeling allows users to iteratively build their understanding through experimentation. Use of this GUI is intended for inquiry and discovery-based learning activities. We discuss a number of examples of how the GUI can be used at the upper high school, introductory university, and advanced university level. Effective teaching modules initially focus on an inquiry-based example guided by the instructor. As students become familiar with the GUI and the CHILD model, the class can shift to more student-centered exploration and experimentation. To make model interpretations more robust, digital elevation models can be imported and direct comparisons can be made between CHILD model results and natural topography. The GUI is available online through the University of Maine's Earth and Climate Sciences website, through the Community Surface Dynamics Modeling System (CSDMS) model repository, or by contacting the corresponding author.

User Behavior Analytics

DOE Office of Scientific and Technical Information (OSTI.GOV)

Turcotte, Melissa; Moore, Juston Shane

User Behaviour Analytics is the tracking, collecting and assessing of user data and activities. The goal is to detect misuse of user credentials by developing models for the normal behaviour of user credentials within a computer network and detect outliers with respect to their baseline.

OCD: The offshore and coastal dispersion model. Volume 1. User's guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

DiCristofaro, D.C.; Hanna, S.R.

1989-11-01

The Offshore and Coastal Dispersion (OCD) Model has been developed to simulate the effect of offshore emissions from point, area, or line sources on the air quality of coastal regions. The OCD model was adapted from the EPA guideline model MPTER (EPA, 1980). Modifications were made to incorporate overwater plume transport and dispersion as well as changes that occur as the plume crosses the shoreline. This is a revised OCD model, the fourth version to date. The volume is the User's Guide which includes a Model overview, technical description, user's instructions, and notes on model evaluation and results.

Game-Theoretic Models of Information Overload in Social Networks

NASA Astrophysics Data System (ADS)

Borgs, Christian; Chayes, Jennifer; Karrer, Brian; Meeder, Brendan; Ravi, R.; Reagans, Ray; Sayedi, Amin

We study the effect of information overload on user engagement in an asymmetric social network like Twitter. We introduce simple game-theoretic models that capture rate competition between celebrities producing updates in such networks where users non-strategically choose a subset of celebrities to follow based on the utility derived from high quality updates as well as disutility derived from having to wade through too many updates. Our two variants model the two behaviors of users dropping some potential connections (followership model) or leaving the network altogether (engagement model). We show that under a simple formulation of celebrity rate competition, there is no pure strategy Nash equilibrium under the first model. We then identify special cases in both models when pure rate equilibria exist for the celebrities: For the followership model, we show existence of a pure rate equilibrium when there is a global ranking of the celebrities in terms of the quality of their updates to users. This result also generalizes to the case when there is a partial order consistent with all the linear orders of the celebrities based on their qualities to the users. Furthermore, these equilibria can be computed in polynomial time. For the engagement model, pure rate equilibria exist when all users are interested in the same number of celebrities, or when they are interested in at most two. Finally, we also give a finite though inefficient procedure to determine if pure equilibria exist in the general case of the followership model.

The Effects Of Urban Landscape Patterns On Rainfall-Runoff Processes At Small Scale

NASA Astrophysics Data System (ADS)

Chen, L.

2016-12-01

Many studies have indicated that urban landscape change may alter rainfall-runoff processes. However, how urban landscape pattern affect this process is little addressed. In this study, the hydrological effects of landscape pattern on rainfall-runoff processes at small-scale was explored. Twelve residential blocks with independent drainage systems in Beijing were selected as case study areas. Impervious metrics of these blocks, i.e., total impervious area (TIA) and directly connected impervious area (DCIA), were identified. A drainage index describing catchment general drainage load and the overland flow distance, Ad, was estimated and used as one of the landscape spatial metrics. Three scenarios were designed to test the potential influence of impervious surface pattern on runoff processes. Runoff variables including total and peak runoff depth (Qt and Qp) were simulated under different rainfall conditions by Storm Water Management Model (SWMM). The relationship between landscape patterns and runoff variables were analyzed, and further among the three scenarios. The results demonstrated that, in small urban blocks, spatial patterns have inherent influences on rainfall-runoff processes. Specifically, (1) Imperviousness acts as effective indicators in predicting both Qt and Qp. As rainfall intensity increases, the major affecting factor changes from DCIA to TIA for both Qt and Qp; (2) Increasing the size of drainage area dominated by each drainage inlet will benefit the block peak flow mitigation; (3) Different spatial concentrations of impervious surfaces have inherent influences on Qp, when impervious surfaces located away from the outlet can reduce the peak flow discharge. These findings may provide insights into the role of urban landscape patterns in driving rainfall-runoff responses in urbanization, which is essential for urban planning and stormwater management.

DockoMatic 2.0: High Throughput Inverse Virtual Screening and Homology Modeling

PubMed Central

Bullock, Casey; Cornia, Nic; Jacob, Reed; Remm, Andrew; Peavey, Thomas; Weekes, Ken; Mallory, Chris; Oxford, Julia T.; McDougal, Owen M.; Andersen, Timothy L.

2013-01-01

DockoMatic is a free and open source application that unifies a suite of software programs within a user-friendly Graphical User Interface (GUI) to facilitate molecular docking experiments. Here we describe the release of DockoMatic 2.0; significant software advances include the ability to: (1) conduct high throughput Inverse Virtual Screening (IVS); (2) construct 3D homology models; and (3) customize the user interface. Users can now efficiently setup, start, and manage IVS experiments through the DockoMatic GUI by specifying a receptor(s), ligand(s), grid parameter file(s), and docking engine (either AutoDock or AutoDock Vina). DockoMatic automatically generates the needed experiment input files and output directories, and allows the user to manage and monitor job progress. Upon job completion, a summary of results is generated by Dockomatic to facilitate interpretation by the user. DockoMatic functionality has also been expanded to facilitate the construction of 3D protein homology models using the Timely Integrated Modeler (TIM) wizard. The wizard TIM provides an interface that accesses the basic local alignment search tool (BLAST) and MODELLER programs, and guides the user through the necessary steps to easily and efficiently create 3D homology models for biomacromolecular structures. The DockoMatic GUI can be customized by the user, and the software design makes it relatively easy to integrate additional docking engines, scoring functions, or third party programs. DockoMatic is a free comprehensive molecular docking software program for all levels of scientists in both research and education. PMID:23808933

Using Dynamic Multi-Task Non-Negative Matrix Factorization to Detect the Evolution of User Preferences in Collaborative Filtering

PubMed Central

Ju, Bin; Qian, Yuntao; Ye, Minchao; Ni, Rong; Zhu, Chenxi

2015-01-01

Predicting what items will be selected by a target user in the future is an important function for recommendation systems. Matrix factorization techniques have been shown to achieve good performance on temporal rating-type data, but little is known about temporal item selection data. In this paper, we developed a unified model that combines Multi-task Non-negative Matrix Factorization and Linear Dynamical Systems to capture the evolution of user preferences. Specifically, user and item features are projected into latent factor space by factoring co-occurrence matrices into a common basis item-factor matrix and multiple factor-user matrices. Moreover, we represented both within and between relationships of multiple factor-user matrices using a state transition matrix to capture the changes in user preferences over time. The experiments show that our proposed algorithm outperforms the other algorithms on two real datasets, which were extracted from Netflix movies and Last.fm music. Furthermore, our model provides a novel dynamic topic model for tracking the evolution of the behavior of a user over time. PMID:26270539

Using Dynamic Multi-Task Non-Negative Matrix Factorization to Detect the Evolution of User Preferences in Collaborative Filtering.

PubMed

Ju, Bin; Qian, Yuntao; Ye, Minchao; Ni, Rong; Zhu, Chenxi

2015-01-01

Predicting what items will be selected by a target user in the future is an important function for recommendation systems. Matrix factorization techniques have been shown to achieve good performance on temporal rating-type data, but little is known about temporal item selection data. In this paper, we developed a unified model that combines Multi-task Non-negative Matrix Factorization and Linear Dynamical Systems to capture the evolution of user preferences. Specifically, user and item features are projected into latent factor space by factoring co-occurrence matrices into a common basis item-factor matrix and multiple factor-user matrices. Moreover, we represented both within and between relationships of multiple factor-user matrices using a state transition matrix to capture the changes in user preferences over time. The experiments show that our proposed algorithm outperforms the other algorithms on two real datasets, which were extracted from Netflix movies and Last.fm music. Furthermore, our model provides a novel dynamic topic model for tracking the evolution of the behavior of a user over time.

Stated choice models for predicting the impact of user fees at public recreation sites

Treesearch

Herbert W. Schroeder; Jordan Louviere

1999-01-01

A crucial question in the implementation of fee programs is how the users of recreation sites will respond to various levels and types of fees. Stated choice models can help managers anticipate the impact of user fees on people's choices among the alternative recreation sites available to them. Models developed for both day and overnight trips to several areas and...

Characterizing and modeling the dynamics of activity and popularity.

PubMed

Zhang, Peng; Li, Menghui; Gao, Liang; Fan, Ying; Di, Zengru

2014-01-01

Social media, regarded as two-layer networks consisting of users and items, turn out to be the most important channels for access to massive information in the era of Web 2.0. The dynamics of human activity and item popularity is a crucial issue in social media networks. In this paper, by analyzing the growth of user activity and item popularity in four empirical social media networks, i.e., Amazon, Flickr, Delicious and Wikipedia, it is found that cross links between users and items are more likely to be created by active users and to be acquired by popular items, where user activity and item popularity are measured by the number of cross links associated with users and items. This indicates that users generally trace popular items, overall. However, it is found that the inactive users more severely trace popular items than the active users. Inspired by empirical analysis, we propose an evolving model for such networks, in which the evolution is driven only by two-step random walk. Numerical experiments verified that the model can qualitatively reproduce the distributions of user activity and item popularity observed in empirical networks. These results might shed light on the understandings of micro dynamics of activity and popularity in social media networks.

Characterizing and Modeling the Dynamics of Activity and Popularity

PubMed Central

Zhang, Peng; Li, Menghui; Gao, Liang; Fan, Ying; Di, Zengru

2014-01-01

Social media, regarded as two-layer networks consisting of users and items, turn out to be the most important channels for access to massive information in the era of Web 2.0. The dynamics of human activity and item popularity is a crucial issue in social media networks. In this paper, by analyzing the growth of user activity and item popularity in four empirical social media networks, i.e., Amazon, Flickr, Delicious and Wikipedia, it is found that cross links between users and items are more likely to be created by active users and to be acquired by popular items, where user activity and item popularity are measured by the number of cross links associated with users and items. This indicates that users generally trace popular items, overall. However, it is found that the inactive users more severely trace popular items than the active users. Inspired by empirical analysis, we propose an evolving model for such networks, in which the evolution is driven only by two-step random walk. Numerical experiments verified that the model can qualitatively reproduce the distributions of user activity and item popularity observed in empirical networks. These results might shed light on the understandings of micro dynamics of activity and popularity in social media networks. PMID:24586586

Accuracy Analysis and Parameters Optimization in Urban Flood Simulation by PEST Model

NASA Astrophysics Data System (ADS)

Keum, H.; Han, K.; Kim, H.; Ha, C.

2017-12-01

The risk of urban flooding has been increasing due to heavy rainfall, flash flooding and rapid urbanization. Rainwater pumping stations, underground reservoirs are used to actively take measures against flooding, however, flood damage from lowlands continues to occur. Inundation in urban areas has resulted in overflow of sewer. Therefore, it is important to implement a network system that is intricately entangled within a city, similar to the actual physical situation and accurate terrain due to the effects on buildings and roads for accurate two-dimensional flood analysis. The purpose of this study is to propose an optimal scenario construction procedure watershed partitioning and parameterization for urban runoff analysis and pipe network analysis, and to increase the accuracy of flooded area prediction through coupled model. The establishment of optimal scenario procedure was verified by applying it to actual drainage in Seoul. In this study, optimization was performed by using four parameters such as Manning's roughness coefficient for conduits, watershed width, Manning's roughness coefficient for impervious area, Manning's roughness coefficient for pervious area. The calibration range of the parameters was determined using the SWMM manual and the ranges used in the previous studies, and the parameters were estimated using the automatic calibration method PEST. The correlation coefficient showed a high correlation coefficient for the scenarios using PEST. The RPE and RMSE also showed high accuracy for the scenarios using PEST. In the case of RPE, error was in the range of 13.9-28.9% in the no-parameter estimation scenarios, but in the scenario using the PEST, the error range was reduced to 6.8-25.7%. Based on the results of this study, it can be concluded that more accurate flood analysis is possible when the optimum scenario is selected by determining the appropriate reference conduit for future urban flooding analysis and if the results is applied to various rainfall event scenarios and parameter optimization. Keywords: Parameters Optimization; PEST model; Urban area Acknowledgement This research was supported by a grant (17AWMP-B079625-04) from Water Management Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government.

Human-telerobot interactions - Information, control, and mental models

NASA Technical Reports Server (NTRS)

Smith, Randy L.; Gillan, Douglas J.

1987-01-01

A part of the NASA's Space Station will be a teleoperated robot (telerobot) with arms for grasping and manipulation, feet for holding onto objects, and television cameras for visual feedback. The objective of the work described in this paper is to develop the requirements and specifications for the user-telerobot interface and to determine through research and testing that the interface results in efficient system operation. The focus of the development of the user-telerobot interface is on the information required by the user, the user inputs, and the design of the control workstation. Closely related to both the information required by the user and the user's control of the telerobot is the user's mental model of the relationship between the control inputs and the telerobot's actions.

Keep Using My Health Apps: Discover Users' Perception of Health and Fitness Apps with the UTAUT2 Model.

PubMed

Yuan, Shupei; Ma, Wenjuan; Kanthawala, Shaheen; Peng, Wei

2015-09-01

Health and fitness applications (apps) are one of the major app categories in the current mobile app market. Few studies have examined this area from the users' perspective. This study adopted the Extended Unified Theory of Acceptance and Use of Technology (UTAUT2) Model to examine the predictors of the users' intention to adopt health and fitness apps. A survey (n=317) was conducted with college-aged smartphone users at a Midwestern university in the United States. Performance expectancy, hedonic motivations, price value, and habit were significant predictors of users' intention of continued usage of health and fitness apps. However, effort expectancy, social influence, and facilitating conditions were not found to predict users' intention of continued usage of health and fitness apps. This study extends the UTATU2 Model to the mobile apps domain and provides health professions, app designers, and marketers with the insights of user experience in terms of continuously using health and fitness apps.

Semantic Interaction for Sensemaking: Inferring Analytical Reasoning for Model Steering.

PubMed

Endert, A; Fiaux, P; North, C

2012-12-01

Visual analytic tools aim to support the cognitively demanding task of sensemaking. Their success often depends on the ability to leverage capabilities of mathematical models, visualization, and human intuition through flexible, usable, and expressive interactions. Spatially clustering data is one effective metaphor for users to explore similarity and relationships between information, adjusting the weighting of dimensions or characteristics of the dataset to observe the change in the spatial layout. Semantic interaction is an approach to user interaction in such spatializations that couples these parametric modifications of the clustering model with users' analytic operations on the data (e.g., direct document movement in the spatialization, highlighting text, search, etc.). In this paper, we present results of a user study exploring the ability of semantic interaction in a visual analytic prototype, ForceSPIRE, to support sensemaking. We found that semantic interaction captures the analytical reasoning of the user through keyword weighting, and aids the user in co-creating a spatialization based on the user's reasoning and intuition.

Online Video-Based Training in the Use of Hydrologic Models: A Case Example Using SWAT

NASA Astrophysics Data System (ADS)

Frankenberger, J.

2009-12-01

Hydrologic models are increasingly important tools in public decision-making. For example, watershed models are used to develop Total Maximum Daily Load (TMDL) plans, quantify pollutant loads, and estimate the effects of watershed restoration efforts funded by the public. One widely-used tool is the Soil and Water Assessment Tool (SWAT), which has been applied by state and federal agencies, consultants, and university researchers to assess sources of nonpoint source pollution and the effects of potential solutions, and used in testimony in at least one lawsuit. The SWAT model has the capability to evaluate the relative effects of different management scenarios on water quality, sediment, and agricultural chemical yield at the watershed scale. As with all models, the model user and the decisions that s/he makes in the modeling process are important determinants of model performance. The SWAT model has an open structure, leaving most decisions up to the model user, which was especially appropriate when the model was primarily used in research by highly-experienced modelers. However, as the model has become more widely applied in planning and assessment, by people who may have limited hydrology background and modeling knowledge, the possibility that users may be using the model inconsistently or even incorrectly becomes a concern. Consistent training can lead to a minimum standard of knowledge that model users are expected to have, and therefore to higher use of best practices in modeling efforts. In addition, widespread availability of training can lead to better decisions about when and where using the model is appropriate, and what level of data needs to be available for confidence in predictions. Currently, most training in model use takes place in occasional face-to-face workshops, courses offered at a few universities, and a short tutorial available in the manual. Many new users simply acquire the model and learn from the manual, other users, trial and error, and posing questions to the web-based group. Although excellent model documentation is available (http://www.brc.tamus.edu/swat/), the extent to which users conduct careful study to ensure that their understanding goes beyond the superficial level is unknown. Online video-on-demand technology provides a way for users to learn consistent content while saving travel resources, and allows for training to fit into people’s schedule. Online videos were created to teach the basics of setting up the model, acquiring input data, parameterizing, calibrating and evaluating model results, and analyzing outputs, as well as model science, uncertainty, and appropriate use. Feedback was sought from the SWAT modeling community to determine typical backgrounds of model users and how the video training fits into the available means of learning SWAT. Evaluation is being undertaken to assess results. The processes used in developing and evaluating the online SWAT training could be applied to other computer models for which use among broader groups of people is increasing or has the potential to grow.

WASP7 Stream Transport - Model Theory and User's Guide: Supplement to Water Quality Analysis Simulation Program (WASP) User Documentation

EPA Science Inventory

The standard WASP7 stream transport model calculates water flow through a branching stream network that may include both free-flowing and ponded segments. This supplemental user manual documents the hydraulic algorithms, including the transport and hydrogeometry equations, the m...

Downsizer - A Graphical User Interface-Based Application for Browsing, Acquiring, and Formatting Time-Series Data for Hydrologic Modeling

USGS Publications Warehouse

Ward-Garrison, Christian; Markstrom, Steven L.; Hay, Lauren E.

2009-01-01

The U.S. Geological Survey Downsizer is a computer application that selects, downloads, verifies, and formats station-based time-series data for environmental-resource models, particularly the Precipitation-Runoff Modeling System. Downsizer implements the client-server software architecture. The client presents a map-based, graphical user interface that is intuitive to modelers; the server provides streamflow and climate time-series data from over 40,000 measurement stations across the United States. This report is the Downsizer user's manual and provides (1) an overview of the software design, (2) installation instructions, (3) a description of the graphical user interface, (4) a description of selected output files, and (5) troubleshooting information.

Modeling online social signed networks

NASA Astrophysics Data System (ADS)

Li, Le; Gu, Ke; Zeng, An; Fan, Ying; Di, Zengru

2018-04-01

People's online rating behavior can be modeled by user-object bipartite networks directly. However, few works have been devoted to reveal the hidden relations between users, especially from the perspective of signed networks. We analyze the signed monopartite networks projected by the signed user-object bipartite networks, finding that the networks are highly clustered with obvious community structure. Interestingly, the positive clustering coefficient is remarkably higher than the negative clustering coefficient. Then, a Signed Growing Network model (SGN) based on local preferential attachment is proposed to generate a user's signed network that has community structure and high positive clustering coefficient. Other structural properties of the modeled networks are also found to be similar to the empirical networks.

Deep Interactive Learning with Sharkzor

DOE Office of Scientific and Technical Information (OSTI.GOV)

None

Sharkzor is a web application for machine-learning assisted image sort and summary. Deep learning algorithms are leveraged to infer, augment, and automate the user’s mental model. Initially, images uploaded by the user are spread out on a canvas. The user then interacts with the images to impute their mental model into the applications algorithmic underpinnings. Methods of interaction within Sharkzor’s user interface and user experience support three primary user tasks: triage, organize and automate. The user triages the large pile of overlapping images by moving images of interest into proximity. The user then organizes said images into meaningful groups. Aftermore » interacting with the images and groups, deep learning helps to automate the user’s interactions. The loop of interaction, automation, and response by the user allows the system to quickly make sense of large amounts of data.« less

An open source web interface for linking models to infrastructure system databases

NASA Astrophysics Data System (ADS)

Knox, S.; Mohamed, K.; Harou, J. J.; Rheinheimer, D. E.; Medellin-Azuara, J.; Meier, P.; Tilmant, A.; Rosenberg, D. E.

2016-12-01

Models of networked engineered resource systems such as water or energy systems are often built collaboratively with developers from different domains working at different locations. These models can be linked to large scale real world databases, and they are constantly being improved and extended. As the development and application of these models becomes more sophisticated, and the computing power required for simulations and/or optimisations increases, so has the need for online services and tools which enable the efficient development and deployment of these models. Hydra Platform is an open source, web-based data management system, which allows modellers of network-based models to remotely store network topology and associated data in a generalised manner, allowing it to serve multiple disciplines. Hydra Platform uses a web API using JSON to allow external programs (referred to as `Apps') to interact with its stored networks and perform actions such as importing data, running models, or exporting the networks to different formats. Hydra Platform supports multiple users accessing the same network and has a suite of functions for managing users and data. We present ongoing development in Hydra Platform, the Hydra Web User Interface, through which users can collaboratively manage network data and models in a web browser. The web interface allows multiple users to graphically access, edit and share their networks, run apps and view results. Through apps, which are located on the server, the web interface can give users access to external data sources and models without the need to install or configure any software. This also ensures model results can be reproduced by removing platform or version dependence. Managing data and deploying models via the web interface provides a way for multiple modellers to collaboratively manage data, deploy and monitor model runs and analyse results.

Modeling Passive Propagation of Malwares on the WWW

NASA Astrophysics Data System (ADS)

Chunbo, Liu; Chunfu, Jia

Web-based malwares host in websites fixedly and download onto user's computers automatically while users browse. This passive propagation pattern is different from that of traditional viruses and worms. A propagation model based on reverse web graph is proposed. In this model, propagation of malwares is analyzed by means of random jump matrix which combines orderness and randomness of user browsing behaviors. Explanatory experiments, which has single or multiple propagation sources respectively, prove the validity of the model. Using this model, people can evaluate the hazardness of specified websites and take corresponding countermeasures.

ASSIST: User's manual

NASA Technical Reports Server (NTRS)

Johnson, S. C.

1986-01-01

Semi-Markov models can be used to compute the reliability of virtually any fault-tolerant system. However, the process of delineating all of the states and transitions in a model of a complex system can be devastingly tedious and error-prone. The ASSIST program allows the user to describe the semi-Markov model in a high-level language. Instead of specifying the individual states of the model, the user specifies the rules governing the behavior of the system and these are used by ASSIST to automatically generate the model. The ASSIST program is described and illustrated by examples.

Modular modeling system for building distributed hydrologic models with a user-friendly software package

NASA Astrophysics Data System (ADS)

Wi, S.; Ray, P. A.; Brown, C.

2015-12-01

A software package developed to facilitate building distributed hydrologic models in a modular modeling system is presented. The software package provides a user-friendly graphical user interface that eases its practical use in water resources-related research and practice. The modular modeling system organizes the options available to users when assembling models according to the stages of hydrological cycle, such as potential evapotranspiration, soil moisture accounting, and snow/glacier melting processes. The software is intended to be a comprehensive tool that simplifies the task of developing, calibrating, validating, and using hydrologic models through the inclusion of intelligent automation to minimize user effort, and reduce opportunities for error. Processes so far automated include the definition of system boundaries (i.e., watershed delineation), climate and geographical input generation, and parameter calibration. Built-in post-processing toolkits greatly improve the functionality of the software as a decision support tool for water resources system management and planning. Example post-processing toolkits enable streamflow simulation at ungauged sites with predefined model parameters, and perform climate change risk assessment by means of the decision scaling approach. The software is validated through application to watersheds representing a variety of hydrologic regimes.

User Manual for SAHM package for VisTrails

USGS Publications Warehouse

Talbert, C.B.; Talbert, M.K.

2012-01-01

The Software for Assisted Habitat I\\•1odeling (SAHM) has been created to both expedite habitat modeling and help maintain a record of the various input data, pre-and post-processing steps and modeling options incorporated in the construction of a species distribution model. The four main advantages to using the combined VisTrail: SAHM package for species distribution modeling are: 1. formalization and tractable recording of the entire modeling process 2. easier collaboration through a common modeling framework 3. a user-friendly graphical interface to manage file input, model runs, and output 4. extensibility to incorporate future and additional modeling routines and tools. This user manual provides detailed information on each module within the SAHM package, their input, output, common connections, optional arguments, and default settings. This information can also be accessed for individual modules by right clicking on the documentation button for any module in VisTrail or by right clicking on any input or output for a module and selecting view documentation. This user manual is intended to accompany the user guide which provides detailed instructions on how to install the SAHM package within VisTrails and then presents information on the use of the package.

AMEM-ADL Polymer Migration Estimation Model User's Guide

EPA Pesticide Factsheets

The user's guide of the Arthur D. Little Polymer Migration Estimation Model (AMEM) provides the information on how the model estimates the fraction of a chemical additive that diffuses through polymeric matrices.

Mental models of a water management system in a green building.

PubMed

Kalantzis, Anastasia; Thatcher, Andrew; Sheridan, Craig

2016-11-01

This intergroup case study compared users' mental models with an expert design model of a water management system in a green building. The system incorporates a constructed wetland component and a rainwater collection pond that together recycle water for re-use in the building and its surroundings. The sample consisted of five building occupants and the cleaner (6 users) and two experts who were involved with the design of the water management system. Users' mental model descriptions and the experts' design model were derived from in-depth interviews combined with self-constructed (and verified) diagrams. Findings from the study suggest that there is considerable variability in the user mental models that could impact the efficient functioning of the water management system. Recommendations for improvements are discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

SABRINA - an interactive geometry modeler for MCNP

DOE Office of Scientific and Technical Information (OSTI.GOV)

West, J.T.; Murphy, J.

One of the most difficult tasks when analyzing a complex three-dimensional system with Monte Carlo is geometry model development. SABRINA attempts to make the modeling process more user-friendly and less of an obstacle. It accepts both combinatorial solid bodies and MCNP surfaces and produces MCNP cells. The model development process in SABRINA is highly interactive and gives the user immediate feedback on errors. Users can view their geometry from arbitrary perspectives while the model is under development and interactively find and correct modeling errors. An example of a SABRINA display is shown. It represents a complex three-dimensional shape.

User's manual for the Simulated Life Analysis of Vehicle Elements (SLAVE) model

NASA Technical Reports Server (NTRS)

Paul, D. D., Jr.

1972-01-01

The simulated life analysis of vehicle elements model was designed to perform statistical simulation studies for any constant loss rate. The outputs of the model consist of the total number of stages required, stages successfully completing their lifetime, and average stage flight life. This report contains a complete description of the model. Users' instructions and interpretation of input and output data are presented such that a user with little or no prior programming knowledge can successfully implement the program.

A comprehensive cost model for NASA data archiving

NASA Technical Reports Server (NTRS)

Green, J. L.; Klenk, K. F.; Treinish, L. A.

1990-01-01

A simple archive cost model has been developed to help predict NASA's archiving costs. The model covers data management activities from the beginning of the mission through launch, acquisition, and support of retrospective users by the long-term archive; it is capable of determining the life cycle costs for archived data depending on how the data need to be managed to meet user requirements. The model, which currently contains 48 equations with a menu-driven user interface, is available for use on an IBM PC or AT.

User's guide to the MESOI diffusion model and to the utility programs UPDATE and LOGRVU

DOE Office of Scientific and Technical Information (OSTI.GOV)

Athey, G.F.; Allwine, K.J.; Ramsdell, J.V.

MESOI is an interactive, Lagrangian puff trajectory diffusion model. The model is documented separately (Ramsdell and Athey, 1981); this report is intended to provide MESOI users with the information needed to successfully conduct model simulations. The user is also provided with guidance in the use of the data file maintenance and review programs; UPDATE and LOGRVU. Complete examples are given for the operaton of all three programs and an appendix documents UPDATE and LOGRVU.

Design and Development of a User Interface for the Dynamic Model of Software Project Management.

DTIC Science & Technology

1988-03-01

rectory of the user’s choice for future...the last choice selected. Let us assume for the sake of this tour that the user has selected all eight choices . ESTIMATED ACTUAL PROJECT SIZE DEFINITION...manipulation of varaibles in the * •. TJin~ca model "h ... ser Inter ace for the Dynamica model was designed b in iterative process of prototyping

A Privacy Preservation Model for Health-Related Social Networking Sites.

PubMed

Li, Jingquan

2015-07-08

The increasing use of social networking sites (SNS) in health care has resulted in a growing number of individuals posting personal health information online. These sites may disclose users' health information to many different individuals and organizations and mine it for a variety of commercial and research purposes, yet the revelation of personal health information to unauthorized individuals or entities brings a concomitant concern of greater risk for loss of privacy among users. Many users join multiple social networks for different purposes and enter personal and other specific information covering social, professional, and health domains into other websites. Integration of multiple online and real social networks makes the users vulnerable to unintentional and intentional security threats and misuse. This paper analyzes the privacy and security characteristics of leading health-related SNS. It presents a threat model and identifies the most important threats to users and SNS providers. Building on threat analysis and modeling, this paper presents a privacy preservation model that incorporates individual self-protection and privacy-by-design approaches and uses the model to develop principles and countermeasures to protect user privacy. This study paves the way for analysis and design of privacy-preserving mechanisms on health-related SNS.

A Privacy Preservation Model for Health-Related Social Networking Sites

PubMed Central

2015-01-01

The increasing use of social networking sites (SNS) in health care has resulted in a growing number of individuals posting personal health information online. These sites may disclose users' health information to many different individuals and organizations and mine it for a variety of commercial and research purposes, yet the revelation of personal health information to unauthorized individuals or entities brings a concomitant concern of greater risk for loss of privacy among users. Many users join multiple social networks for different purposes and enter personal and other specific information covering social, professional, and health domains into other websites. Integration of multiple online and real social networks makes the users vulnerable to unintentional and intentional security threats and misuse. This paper analyzes the privacy and security characteristics of leading health-related SNS. It presents a threat model and identifies the most important threats to users and SNS providers. Building on threat analysis and modeling, this paper presents a privacy preservation model that incorporates individual self-protection and privacy-by-design approaches and uses the model to develop principles and countermeasures to protect user privacy. This study paves the way for analysis and design of privacy-preserving mechanisms on health-related SNS. PMID:26155953

A Global User-Driven Model for Tile Prefetching in Web Geographical Information Systems.

PubMed

Pan, Shaoming; Chong, Yanwen; Zhang, Hang; Tan, Xicheng

2017-01-01

A web geographical information system is a typical service-intensive application. Tile prefetching and cache replacement can improve cache hit ratios by proactively fetching tiles from storage and replacing the appropriate tiles from the high-speed cache buffer without waiting for a client's requests, which reduces disk latency and improves system access performance. Most popular prefetching strategies consider only the relative tile popularities to predict which tile should be prefetched or consider only a single individual user's access behavior to determine which neighbor tiles need to be prefetched. Some studies show that comprehensively considering all users' access behaviors and all tiles' relationships in the prediction process can achieve more significant improvements. Thus, this work proposes a new global user-driven model for tile prefetching and cache replacement. First, based on all users' access behaviors, a type of expression method for tile correlation is designed and implemented. Then, a conditional prefetching probability can be computed based on the proposed correlation expression mode. Thus, some tiles to be prefetched can be found by computing and comparing the conditional prefetching probability from the uncached tiles set and, similarly, some replacement tiles can be found in the cache buffer according to multi-step prefetching. Finally, some experiments are provided comparing the proposed model with other global user-driven models, other single user-driven models, and other client-side prefetching strategies. The results show that the proposed model can achieve a prefetching hit rate in approximately 10.6% ~ 110.5% higher than the compared methods.

Users guide for the hydroacoustic coverage assessment model (HydroCAM)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Farrell, T., LLNL

1997-12-01

A model for predicting the detection and localization performance of hydroacoustic monitoring networks has been developed. The model accounts for major factors affecting global-scale acoustic propagation in the ocean. including horizontal refraction, travel time variability due to spatial and temporal fluctuations in the ocean, and detailed characteristics of the source. Graphical user interfaces are provided to setup the models and visualize the results. The model produces maps of network detection coverage and localization area of uncertainty, as well as intermediate results such as predicted path amplitudes, travel time and travel time variance. This Users Guide for the model is organizedmore » into three sections. First a summary of functionality available in the model is presented, including example output products. The second section provides detailed descriptions of each of models contained in the system. The last section describes how to run the model, including a summary of each data input form in the user interface.« less

Models of user involvement in the mental health context: intentions and implementation challenges.

PubMed

Storm, Marianne; Edwards, Adrian

2013-09-01

Patient-centered care, shared decision-making, patient participation and the recovery model are models of care which incorporate user involvement and patients' perspectives on their treatment and care. The aims of this paper are to examine these different care models and their association with user involvement in the mental health context and discuss some of the challenges associated with their implementation. The sources used are health policy documents and published literature and research on patient-centered care, shared decision-making, patient participation and recovery. The policy documents advocate that mental health services should be oriented towards patients' or users' needs, participation and involvement. These policies also emphasize recovery and integration of people with mental disorders in the community. However, these collaborative care models have generally been subject to limited empirical research about effectiveness. There are also challenges to implementation of the models in inpatient care. What evidence there is indicates tensions between patients' and providers' perspectives on treatment and care. There are issues related to risk and the person's capacity for user involvement, and concerns about what role patients themselves wish to play in decision-making. Lack of competence and awareness among providers are further issues. Further work on training, evaluation and implementation is needed to ensure that inpatient mental health services are adapting user oriented care models at all levels of services.

PESTAN: Pesticide Analytical Model Version 4.0 User's Guide

EPA Pesticide Factsheets

The principal objective of this User's Guide to provide essential information on the aspects such as model conceptualization, model theory, assumptions and limitations, determination of input parameters, analysis of results and sensitivity analysis.

Social Image Captioning: Exploring Visual Attention and User Attention.

PubMed

Wang, Leiquan; Chu, Xiaoliang; Zhang, Weishan; Wei, Yiwei; Sun, Weichen; Wu, Chunlei

2018-02-22

Image captioning with a natural language has been an emerging trend. However, the social image, associated with a set of user-contributed tags, has been rarely investigated for a similar task. The user-contributed tags, which could reflect the user attention, have been neglected in conventional image captioning. Most existing image captioning models cannot be applied directly to social image captioning. In this work, a dual attention model is proposed for social image captioning by combining the visual attention and user attention simultaneously.Visual attention is used to compress a large mount of salient visual information, while user attention is applied to adjust the description of the social images with user-contributed tags. Experiments conducted on the Microsoft (MS) COCO dataset demonstrate the superiority of the proposed method of dual attention.

Social Image Captioning: Exploring Visual Attention and User Attention

PubMed Central

Chu, Xiaoliang; Zhang, Weishan; Wei, Yiwei; Sun, Weichen; Wu, Chunlei

2018-01-01

Image captioning with a natural language has been an emerging trend. However, the social image, associated with a set of user-contributed tags, has been rarely investigated for a similar task. The user-contributed tags, which could reflect the user attention, have been neglected in conventional image captioning. Most existing image captioning models cannot be applied directly to social image captioning. In this work, a dual attention model is proposed for social image captioning by combining the visual attention and user attention simultaneously.Visual attention is used to compress a large mount of salient visual information, while user attention is applied to adjust the description of the social images with user-contributed tags. Experiments conducted on the Microsoft (MS) COCO dataset demonstrate the superiority of the proposed method of dual attention. PMID:29470409

HYDROCARBON SPILL SCREENING MODEL (HSSM) VOLUME 1: USER'S GUIDE

EPA Science Inventory

This users guide describes the Hydrocarbon Spill Screening Model (HSSM). The model is intended for simulation of subsurface releases of light nonaqueous phase liquids (LNAPLs). The model consists of separate modules for LNAPL flow through the vadose zone, spreading in the capil...

Understanding the Effects of Users' Behaviors on Effectiveness of Different Exogenous Regulatory Common Pool Resource Management Institutions

NASA Astrophysics Data System (ADS)

Madani, K.; Dinar, A.

2013-12-01

Tragedy of the commons is generally recognized as one of the possible destinies for common pool resources (CPRs). To avoid the tragedy of the commons and prolonging the life of CPRs, users may show different behavioral characteristics and use different rationales for CPR planning and management. Furthermore, regulators may adopt different strategies for sustainable management of CPRs. The effectiveness of different regulatory exogenous management institutions cannot be evaluated through conventional CPR models since they assume that either users base their behavior on individual rationality and adopt a selfish behavior (Nash behavior), or that the users seek the system's optimal solution without giving priority to their own interests. Therefore, conventional models fail to reliably predict the outcome of CPR problems in which parties may have a range of behavioral characteristics, putting them somewhere in between the two types of behaviors traditionally considered. This work examines the effectiveness of different regulatory exogenous CPR management institutions through a user-based model (as opposed to a system-based model). The new modeling framework allows for consideration of sensitivity of the results to different behavioral characteristics of interacting CPR users. The suggested modeling approach is applied to a benchmark groundwater management problem. Results indicate that some well-known exogenous management institutions (e.g. taxing) are ineffective in sustainable management of CPRs in most cases. Bankruptcy-based management can be helpful, but determination of the fair level of cutbacks remains challenging under this type of institution. Furthermore, some bankruptcy rules such as the Constrained Equal Award (CEA) method are more beneficial to wealthier users, failing to establish social justice. Quota-based and CPR status-based management perform as the most promising and robust regulatory exogenous institutions in prolonging the CPR's life and increasing the long-term benefits to its users.

Section 4. The GIS Weasel User's Manual

USGS Publications Warehouse

Viger, Roland J.; Leavesley, George H.

2007-01-01

INTRODUCTION The GIS Weasel was designed to aid in the preparation of spatial information for input to lumped and distributed parameter hydrologic or other environmental models. The GIS Weasel provides geographic information system (GIS) tools to help create maps of geographic features relevant to a user's model and to generate parameters from those maps. The operation of the GIS Weasel does not require the user to be a GIS expert, only that the user have an understanding of the spatial information requirements of the environmental simulation model being used. The GIS Weasel software system uses a GIS-based graphical user interface (GUI), the C programming language, and external scripting languages. The software will run on any computing platform where ArcInfo Workstation (version 8.0.2 or later) and the GRID extension are accessible. The user controls the processing of the GIS Weasel by interacting with menus, maps, and tables. The purpose of this document is to describe the operation of the software. This document is not intended to describe the usage of this software in support of any particular environmental simulation model. Such guides are published separately.

Interaction Junk: User Interaction-Based Evaluation of Visual Analytic Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Endert, Alexander; North, Chris

2012-10-14

With the growing need for visualization to aid users in understanding large, complex datasets, the ability for users to interact and explore these datasets is critical. As visual analytic systems have advanced to leverage powerful computational models and data analytics capabilities, the modes by which users engage and interact with the information are limited. Often, users are taxed with directly manipulating parameters of these models through traditional GUIs (e.g., using sliders to directly manipulate the value of a parameter). However, the purpose of user interaction in visual analytic systems is to enable visual data exploration – where users can focusmore » on their task, as opposed to the tool or system. As a result, users can engage freely in data exploration and decision-making, for the purpose of gaining insight. In this position paper, we discuss how evaluating visual analytic systems can be approached through user interaction analysis, where the goal is to minimize the cognitive translation between the visual metaphor and the mode of interaction (i.e., reducing the “Interactionjunk”). We motivate this concept through a discussion of traditional GUIs used in visual analytics for direct manipulation of model parameters, and the importance of designing interactions the support visual data exploration.« less

Mechanism Design for Incentivizing Social Media Contributions

NASA Astrophysics Data System (ADS)

Singh, Vivek K.; Jain, Ramesh; Kankanhalli, Mohan

Despite recent advancements in user-driven social media platforms, tools for studying user behavior patterns and motivations remain primitive. We highlight the voluntary nature of user contributions and that users can choose when (and when not) to contribute to the common media pool. A Game theoretic framework is proposed to study the dynamics of social media networks where contribution costs are individual but gains are common. We model users as rational selfish agents, and consider domain attributes like voluntary participation, virtual reward structure, network effect, and public-sharing to model the dynamics of this interaction. The created model describes the most appropriate contribution strategy from each user's perspective and also highlights issues like 'free-rider' problem and individual rationality leading to irrational (i.e. sub-optimal) group behavior. We also consider the perspective of the system designer who is interested in finding the best incentive mechanisms to influence the selfish end-users so that the overall system utility is maximized. We propose and compare multiple mechanisms (based on optimal bonus payment, social incentive leveraging, and second price auction) to study how a system designer can exploit the selfishness of its users, to design incentive mechanisms which improve the overall task-completion probability and system performance, while possibly still benefiting the individual users.

Applying the Technology Acceptance Model and flow theory to Cyworld user behavior: implication of the Web2.0 user acceptance.

PubMed

Shin, Dong-Hee; Kim, Won-Yong; Kim, Won-Young

2008-06-01

This study explores attitudinal and behavioral patterns when using Cyworld by adopting an expanded Technology Acceptance Model (TAM). A model for Cyworld acceptance is used to examine how various factors modified from the TAM influence acceptance and its antecedents. This model is examined through an empirical study involving Cyworld users using structural equation modeling techniques. The model shows reasonably good measurement properties and the constructs are validated. The results not only confirm the model but also reveal general factors applicable to Web2.0. A set of constructs in the model can be the Web2.0-specific factors, playing as enhancing factor to attitudes and intention.

Ceiling effect of online user interests for the movies

NASA Astrophysics Data System (ADS)

Ni, Jing; Zhang, Yi-Lu; Hu, Zhao-Long; Song, Wen-Jun; Hou, Lei; Guo, Qiang; Liu, Jian-Guo

2014-05-01

Online users' collective interests play an important role for analyzing the online social networks and personalized recommendations. In this paper, we introduce the information entropy to measure the diversity of the user interests. We empirically analyze the information entropy of the objects selected by the users with the same degree in both the MovieLens and Netflix datasets. The results show that as the user degree increases, the entropy increases from the lowest value at first to the highest value and then begins to fall, which indicates that the interests of the small-degree and large-degree users are more centralized, while the interests of normal users are more diverse. Furthermore, a null model is proposed to compare with the empirical results. In a null model, we keep the number of users and objects as well as the user degrees unchangeable, but the selection behaviors are totally random in both datasets. Results show that the diversity of the majority of users in the real datasets is higher than that the random case, with the exception of the diversity of only a fraction of small-degree users. That may because new users just like popular objects, while with the increase of the user experiences, they quickly become users of broad interests. Therefore, small-degree users' interests are much easier to predict than the other users', which may shed some light for the cold-start problem.

Accurate and scalable social recommendation using mixed-membership stochastic block models.

PubMed

Godoy-Lorite, Antonia; Guimerà, Roger; Moore, Cristopher; Sales-Pardo, Marta

2016-12-13

With increasing amounts of information available, modeling and predicting user preferences-for books or articles, for example-are becoming more important. We present a collaborative filtering model, with an associated scalable algorithm, that makes accurate predictions of users' ratings. Like previous approaches, we assume that there are groups of users and of items and that the rating a user gives an item is determined by their respective group memberships. However, we allow each user and each item to belong simultaneously to mixtures of different groups and, unlike many popular approaches such as matrix factorization, we do not assume that users in each group prefer a single group of items. In particular, we do not assume that ratings depend linearly on a measure of similarity, but allow probability distributions of ratings to depend freely on the user's and item's groups. The resulting overlapping groups and predicted ratings can be inferred with an expectation-maximization algorithm whose running time scales linearly with the number of observed ratings. Our approach enables us to predict user preferences in large datasets and is considerably more accurate than the current algorithms for such large datasets.

Predicting personality traits related to consumer behavior using SNS analysis

NASA Astrophysics Data System (ADS)

Baik, Jongbum; Lee, Kangbok; Lee, Soowon; Kim, Yongbum; Choi, Jayoung

2016-07-01

Modeling a user profile is one of the important factors for devising a personalized recommendation. The traditional approach for modeling a user profile in computer science is to collect and generalize the user's buying behavior or preference history, generated from the user's interactions with recommender systems. According to consumer behavior research, however, internal factors such as personality traits influence a consumer's buying behavior. Existing studies have tried to adapt the Big 5 personality traits to personalized recommendations. However, although studies have shown that these traits can be useful to some extent for personalized recommendation, the causal relationship between the Big 5 personality traits and the buying behaviors of actual consumers has not been validated. In this paper, we propose a novel method for predicting the four personality traits-Extroversion, Public Self-consciousness, Desire for Uniqueness, and Self-esteem-that correlate with buying behaviors. The proposed method automatically constructs a user-personality-traits prediction model for each user by analyzing the user behavior on a social networking service. The experimental results from an analysis of the collected Facebook data show that the proposed method can predict user-personality traits with greater precision than methods that use the variables proposed in previous studies.

Use of natural user interfaces in water simulations

NASA Astrophysics Data System (ADS)

Donchyts, G.; Baart, F.; van Dam, A.; Jagers, B.

2013-12-01

Conventional graphical user interfaces, used to edit input and present results of earth science models, have seen little innovation for the past two decades. In most cases model data is presented and edited using 2D projections even when working with 3D data. The emergence of 3D motion sensing technologies, such as Microsoft Kinect and LEAP Motion, opens new possibilities for user interaction by adding more degrees of freedom compared to a classical way using mouse and keyboard. Here we investigate how interaction with hydrodynamic numerical models can be improved using these new technologies. Our research hypothesis (H1) states that properly designed 3D graphical user interface paired with the 3D motion sensor can significantly reduce the time required to setup and use numerical models. In this work we have used a LEAP motion controller combined with a shallow water flow model engine D-Flow Flexible Mesh. Interacting with numerical model using hands

A Novel Recommendation System to Match College Events and Groups to Students

NASA Astrophysics Data System (ADS)

Qazanfari, K.; Youssef, A.; Keane, K.; Nelson, J.

2017-10-01

With the recent increase in data online, discovering meaningful opportunities can be time-consuming and complicated for many individuals. To overcome this data overload challenge, we present a novel text-content-based recommender system as a valuable tool to predict user interests. To that end, we develop a specific procedure to create user models and item feature-vectors, where items are described in free text. The user model is generated by soliciting from a user a few keywords and expanding those keywords into a list of weighted near-synonyms. The item feature-vectors are generated from the textual descriptions of the items, using modified tf-idf values of the users’ keywords and their near-synonyms. Once the users are modeled and the items are abstracted into feature vectors, the system returns the maximum-similarity items as recommendations to that user. Our experimental evaluation shows that our method of creating the user models and item feature-vectors resulted in higher precision and accuracy in comparison to well-known feature-vector-generating methods like Glove and Word2Vec. It also shows that stemming and the use of a modified version of tf-idf increase the accuracy and precision by 2% and 3%, respectively, compared to non-stemming and the standard tf-idf definition. Moreover, the evaluation results show that updating the user model from usage histories improves the precision and accuracy of the system. This recommender system has been developed as part of the Agnes application, which runs on iOS and Android platforms and is accessible through the Agnes website.

Regional Atmospheric Transport Code for Hanford Emission Tracking (RATCHET). Hanford Environmental Dose Reconstruction Project

DOE Office of Scientific and Technical Information (OSTI.GOV)

Ramsdell, J.V. Jr.; Simonen, C.A.; Burk, K.W.

1994-02-01

The purpose of the Hanford Environmental Dose Reconstruction (HEDR) Project is to estimate radiation doses that individuals may have received from operations at the Hanford Site since 1944. This report deals specifically with the atmospheric transport model, Regional Atmospheric Transport Code for Hanford Emission Tracking (RATCHET). RATCHET is a major rework of the MESOILT2 model used in the first phase of the HEDR Project; only the bookkeeping framework escaped major changes. Changes to the code include (1) significant changes in the representation of atmospheric processes and (2) incorporation of Monte Carlo methods for representing uncertainty in input data, model parameters,more » and coefficients. To a large extent, the revisions to the model are based on recommendations of a peer working group that met in March 1991. Technical bases for other portions of the atmospheric transport model are addressed in two other documents. This report has three major sections: a description of the model, a user`s guide, and a programmer`s guide. These sections discuss RATCHET from three different perspectives. The first provides a technical description of the code with emphasis on details such as the representation of the model domain, the data required by the model, and the equations used to make the model calculations. The technical description is followed by a user`s guide to the model with emphasis on running the code. The user`s guide contains information about the model input and output. The third section is a programmer`s guide to the code. It discusses the hardware and software required to run the code. The programmer`s guide also discusses program structure and each of the program elements.« less

GMove: Group-Level Mobility Modeling Using Geo-Tagged Social Media.

PubMed

Zhang, Chao; Zhang, Keyang; Yuan, Quan; Zhang, Luming; Hanratty, Tim; Han, Jiawei

2016-08-01

Understanding human mobility is of great importance to various applications, such as urban planning, traffic scheduling, and location prediction. While there has been fruitful research on modeling human mobility using tracking data ( e.g. , GPS traces), the recent growth of geo-tagged social media (GeoSM) brings new opportunities to this task because of its sheer size and multi-dimensional nature. Nevertheless, how to obtain quality mobility models from the highly sparse and complex GeoSM data remains a challenge that cannot be readily addressed by existing techniques. We propose GMove, a group-level mobility modeling method using GeoSM data. Our insight is that the GeoSM data usually contains multiple user groups, where the users within the same group share significant movement regularity. Meanwhile, user grouping and mobility modeling are two intertwined tasks: (1) better user grouping offers better within-group data consistency and thus leads to more reliable mobility models; and (2) better mobility models serve as useful guidance that helps infer the group a user belongs to. GMove thus alternates between user grouping and mobility modeling, and generates an ensemble of Hidden Markov Models (HMMs) to characterize group-level movement regularity. Furthermore, to reduce text sparsity of GeoSM data, GMove also features a text augmenter. The augmenter computes keyword correlations by examining their spatiotemporal distributions. With such correlations as auxiliary knowledge, it performs sampling-based augmentation to alleviate text sparsity and produce high-quality HMMs. Our extensive experiments on two real-life data sets demonstrate that GMove can effectively generate meaningful group-level mobility models. Moreover, with context-aware location prediction as an example application, we find that GMove significantly outperforms baseline mobility models in terms of prediction accuracy.

GMove: Group-Level Mobility Modeling Using Geo-Tagged Social Media

PubMed Central

Zhang, Chao; Zhang, Keyang; Yuan, Quan; Zhang, Luming; Hanratty, Tim; Han, Jiawei

2017-01-01

Understanding human mobility is of great importance to various applications, such as urban planning, traffic scheduling, and location prediction. While there has been fruitful research on modeling human mobility using tracking data (e.g., GPS traces), the recent growth of geo-tagged social media (GeoSM) brings new opportunities to this task because of its sheer size and multi-dimensional nature. Nevertheless, how to obtain quality mobility models from the highly sparse and complex GeoSM data remains a challenge that cannot be readily addressed by existing techniques. We propose GMove, a group-level mobility modeling method using GeoSM data. Our insight is that the GeoSM data usually contains multiple user groups, where the users within the same group share significant movement regularity. Meanwhile, user grouping and mobility modeling are two intertwined tasks: (1) better user grouping offers better within-group data consistency and thus leads to more reliable mobility models; and (2) better mobility models serve as useful guidance that helps infer the group a user belongs to. GMove thus alternates between user grouping and mobility modeling, and generates an ensemble of Hidden Markov Models (HMMs) to characterize group-level movement regularity. Furthermore, to reduce text sparsity of GeoSM data, GMove also features a text augmenter. The augmenter computes keyword correlations by examining their spatiotemporal distributions. With such correlations as auxiliary knowledge, it performs sampling-based augmentation to alleviate text sparsity and produce high-quality HMMs. Our extensive experiments on two real-life data sets demonstrate that GMove can effectively generate meaningful group-level mobility models. Moreover, with context-aware location prediction as an example application, we find that GMove significantly outperforms baseline mobility models in terms of prediction accuracy. PMID:28163978

Location contexts of user check-ins to model urban geo life-style patterns.

PubMed

Hasan, Samiul; Ukkusuri, Satish V

2015-01-01

Geo-location data from social media offers us information, in new ways, to understand people's attitudes and interests through their activity choices. In this paper, we explore the idea of inferring individual life-style patterns from activity-location choices revealed in social media. We present a model to understand life-style patterns using the contextual information (e. g. location categories) of user check-ins. Probabilistic topic models are developed to infer individual geo life-style patterns from two perspectives: i) to characterize the patterns of user interests to different types of places and ii) to characterize the patterns of user visits to different neighborhoods. The method is applied to a dataset of Foursquare check-ins of the users from New York City. The co-existence of several location contexts and the corresponding probabilities in a given pattern provide useful information about user interests and choices. It is found that geo life-style patterns have similar items-either nearby neighborhoods or similar location categories. The semantic and geographic proximity of the items in a pattern reflects the hidden regularity in user preferences and location choice behavior.

Software Helps Retrieve Information Relevant to the User

NASA Technical Reports Server (NTRS)

Mathe, Natalie; Chen, James

2003-01-01

The Adaptive Indexing and Retrieval Agent (ARNIE) is a code library, designed to be used by an application program, that assists human users in retrieving desired information in a hypertext setting. Using ARNIE, the program implements a computational model for interactively learning what information each human user considers relevant in context. The model, called a "relevance network," incrementally adapts retrieved information to users individual profiles on the basis of feedback from the users regarding specific queries. The model also generalizes such knowledge for subsequent derivation of relevant references for similar queries and profiles, thereby, assisting users in filtering information by relevance. ARNIE thus enables users to categorize and share information of interest in various contexts. ARNIE encodes the relevance and structure of information in a neural network dynamically configured with a genetic algorithm. ARNIE maintains an internal database, wherein it saves associations, and from which it returns associated items in response to a query. A C++ compiler for a platform on which ARNIE will be utilized is necessary for creating the ARNIE library but is not necessary for the execution of the software.

ModelMate - A graphical user interface for model analysis

USGS Publications Warehouse

Banta, Edward R.

2011-01-01

ModelMate is a graphical user interface designed to facilitate use of model-analysis programs with models. This initial version of ModelMate supports one model-analysis program, UCODE_2005, and one model software program, MODFLOW-2005. ModelMate can be used to prepare input files for UCODE_2005, run UCODE_2005, and display analysis results. A link to the GW_Chart graphing program facilitates visual interpretation of results. ModelMate includes capabilities for organizing directories used with the parallel-processing capabilities of UCODE_2005 and for maintaining files in those directories to be identical to a set of files in a master directory. ModelMate can be used on its own or in conjunction with ModelMuse, a graphical user interface for MODFLOW-2005 and PHAST.

Personalized summarization using user preference for m-learning

NASA Astrophysics Data System (ADS)

Lee, Sihyoung; Yang, Seungji; Ro, Yong Man; Kim, Hyoung Joong

2008-02-01

As the Internet and multimedia technology is becoming advanced, the number of digital multimedia contents is also becoming abundant in learning area. In order to facilitate the access of digital knowledge and to meet the need of a lifelong learning, e-learning could be the helpful alternative way to the conventional learning paradigms. E-learning is known as a unifying term to express online, web-based and technology-delivered learning. Mobile-learning (m-learning) is defined as e-learning through mobile devices using wireless transmission. In a survey, more than half of the people remarked that the re-consumption was one of the convenient features in e-learning. However, it is not easy to find user's preferred segmentation from a full version of lengthy e-learning content. Especially in m-learning, a content-summarization method is strongly required because mobile devices are limited to low processing power and battery capacity. In this paper, we propose a new user preference model for re-consumption to construct personalized summarization for re-consumption. The user preference for re-consumption is modeled based on user actions with statistical model. Based on the user preference model for re-consumption with personalized user actions, our method discriminates preferred parts over the entire content. Experimental results demonstrated successful personalized summarization.

Development and application of virtual reality for man/systems integration

NASA Technical Reports Server (NTRS)

Brown, Marcus

1991-01-01

While the graphical presentation of computer models signified a quantum leap over presentations limited to text and numbers, it still has the problem of presenting an interface barrier between the human user and the computer model. The user must learn a command language in order to orient themselves in the model. For example, to move left from the current viewpoint of the model, they might be required to type 'LEFT' at a keyboard. This command is fairly intuitive, but if the viewpoint moves far enough that there are no visual cues overlapping with the first view, the user does not know if the viewpoint has moved inches, feet, or miles to the left, or perhaps remained in the same position, but rotated to the left. Until the user becomes quite familiar with the interface language of the computer model presentation, they will be proned to lossing their bearings frequently. Even a highly skilled user will occasionally get lost in the model. A new approach to presenting type type of information is to directly interpret the user's body motions as the input language for determining what view to present. When the user's head turns 45 degrees to the left, the viewpoint should be rotated 45 degrees to the left. Since the head moves through several intermediate angles between the original view and the final one, several intermediate views should be presented, providing the user with a sense of continuity between the original view and the final one. Since the primary way a human physically interacts with their environment should monitor the movements of the user's hands and alter objects in the virtual model in a way consistent with the way an actual object would move when manipulated using the same hand movements. Since this approach to the man-computer interface closely models the same type of interface that humans have with the physical world, this type of interface is often called virtual reality, and the model is referred to as a virtual world. The task of this summer fellowship was to set up a virtual reality system at MSFC and begin applying it to some of the questions which concern scientists and engineers involved in space flight. A brief discussion of this work is presented.

Birth/death process model

NASA Technical Reports Server (NTRS)

Solloway, C. B.; Wakeland, W.

1976-01-01

First-order Markov model developed on digital computer for population with specific characteristics. System is user interactive, self-documenting, and does not require user to have complete understanding of underlying model details. Contains thorough error-checking algorithms on input and default capabilities.

The cloud services innovation platform- enabling service-based environmental modelling using infrastructure-as-a-service cloud computing

USDA-ARS?s Scientific Manuscript database

Service oriented architectures allow modelling engines to be hosted over the Internet abstracting physical hardware configuration and software deployments from model users. Many existing environmental models are deployed as desktop applications running on user's personal computers (PCs). Migration ...

USERS MANUAL: LANDFILL GAS EMISSIONS MODEL - VERSION 2.0

EPA Science Inventory

The document is a user's guide for a computer model, Version 2.0 of the Landfill Gas Emissions Model (LandGEM), for estimating air pollution emissions from municipal solid waste (MSW) landfills. The model can be used to estimate emission rates for methane, carbon dioxide, nonmet...

GrowYourIC: an open access Python code to facilitate comparison between kinematic models of inner core evolution and seismic observations

NASA Astrophysics Data System (ADS)

Lasbleis, M.; Day, E. A.; Waszek, L.

2017-12-01

The complex nature of inner core structure has been well-established from seismic studies, with heterogeneities at various length scales, both radially and laterally. Despite this, no geodynamic model has successfully explained all of the observed seismic features. To facilitate comparisons between seismic observations and geodynamic models of inner core growth we have developed a new, open access Python tool - GrowYourIC - that allows users to compare models of inner core structure. The code allows users to simulate different evolution models of the inner core, with user-defined rates of inner core growth, translation and rotation. Once the user has "grown" an inner core with their preferred parameters they can then explore the effect of "their" inner core's evolution on the relative age and growth rate in different regions of the inner core. The code will convert these parameters into seismic properties using either built-in mineral physics models, or user-supplied ones that calculate these seismic properties with users' own preferred mineralogical models. The 3D model of isotropic inner core properties can then be used to calculate the predicted seismic travel time anomalies for a random, or user-specified, set of seismic ray paths through the inner core. A real dataset of inner core body-wave differential travel times is included for the purpose of comparing user-generated models of inner core growth to actual observed travel time anomalies in the top 100km of the inner core. Here, we explore some of the possibilities of our code. We investigate the effect of the limited illumination of the inner core by seismic waves on the robustness of kinematic model interpretation. We test the impact on seismic differential travel time observations of several kinematic models of inner core growth: fast lateral translation; slow differential growth; and inner core super-rotation. We find that a model of inner core evolution incorporating both differential growth and slow super-rotation is able to recreate some of the more intricate details of the seismic observations. Specifically we are able to "grow" an inner core that has an asymmetric shift in isotropic hemisphere boundaries with increasing depth in the inner core.

User Delay Cost Model and Facilities Maintenance Cost Model for a Terminal Control Area : Volume 3. User's Manual and Program Documentation for the Facilities Maintenance Cost Model

DOT National Transportation Integrated Search

1978-05-01

The Facilities Maintenance Cost Model (FMCM) is an analytic model designed to calculate expected annual labor costs of maintenance within a given FAA maintenance sector. The model is programmed in FORTRAN IV and has been demonstrated on the CDC Krono...

Users' Continuance Intention of Virtual Learning Community Services: The Moderating Role of Usage Experience

ERIC Educational Resources Information Center

Zhang, Min; Liu, Yupei; Yan, Weiwei; Zhang, Yan

2017-01-01

Users' continuance intention plays a significant role in the process of information system (IS) service, especially virtual learning community (VLC) services. Following the IS success model and IS post-acceptance model, this study explores the determinants of users' intention to continue using VLCs' service from the perspective of quality,…

Computer-Mediated Counter-Arguments and Individual Learning

ERIC Educational Resources Information Center

Hsu, Jack Shih-Chieh; Huang, Hsieh-Hong; Linden, Lars P.

2011-01-01

This study explores a de-bias function for a decision support systems (DSS) that is designed to help a user avoid confirmation bias by increasing the user's learning opportunities. Grounded upon the theory of mental models, the use of DSS is viewed as involving a learning process, whereby a user is directed to build mental models so as to reduce…

A mathematical model of vowel identification by users of cochlear implants

PubMed Central

Sagi, Elad; Meyer, Ted A.; Kaiser, Adam R.; Teoh, Su Wooi; Svirsky, Mario A.

2010-01-01

A simple mathematical model is presented that predicts vowel identification by cochlear implant users based on these listeners’ resolving power for the mean locations of first, second, and∕or third formant energies along the implanted electrode array. This psychophysically based model provides hypotheses about the mechanism cochlear implant users employ to encode and process the input auditory signal to extract information relevant for identifying steady-state vowels. Using one free parameter, the model predicts most of the patterns of vowel confusions made by users of different cochlear implant devices and stimulation strategies, and who show widely different levels of speech perception (from near chance to near perfect). Furthermore, the model can predict results from the literature, such as Skinner, et al. [(1995). Ann. Otol. Rhinol. Laryngol. 104, 307–311] frequency mapping study, and the general trend in the vowel results of Zeng and Galvin’s [(1999). Ear Hear. 20, 60–74] studies of output electrical dynamic range reduction. The implementation of the model presented here is specific to vowel identification by cochlear implant users, but the framework of the model is more general. Computational models such as the one presented here can be useful for advancing knowledge about speech perception in hearing impaired populations, and for providing a guide for clinical research and clinical practice. PMID:20136228

[Comparison of level of satisfaction of users of home care: integrated model vs. dispensaries model].

PubMed

Gorina, Marta; Limonero, Joaquín T; Peñart, Xavier; Jiménez, Jordi; Gassó, Javier

2014-01-01

To determine the level of satisfaction of users that receive home health care through two different models of primary health care: integrated model and dispensaries model. cross-sectional, observational study. Two primary care centers in the province of Barcelona. The questionnaire was administered to 158 chronic patients over 65 years old, of whom 67 were receiving health care from the integrated model, and 91 from the dispensaries model. The Evaluation of Satisfaction with Home Health Care (SATISFAD12) questionnaire was, together with other complementary questions about service satisfaction of home health care, as well as social demographic questions (age, sex, disease, etc). The patients of the dispensaries model showed more satisfaction than the users receiving care from the integrated model. There was a greater healthcare continuity for those patients from the dispensaries model, and a lower percentage of hospitalizations during the last year. The satisfaction of the users from both models was not associated to gender, the health perception,or independence of the The user satisfaction rate of the home care by primary health care seems to depend of the typical characteristics of each organisational model. The dispensaries model shows a higher rate of satisfaction or perceived quality of care in all the aspects analysed. More studies are neede to extrapolate these results to other primary care centers belonging to other institutions. Copyright © 2013 Elsevier España, S.L. All rights reserved.

User Delay Cost Model and Facilities Maintenance Cost Model for a Terminal Control Area : Volume 1. Model Formulation and Demonstration

DOT National Transportation Integrated Search

1978-05-01

The User Delay Cost Model (UDCM) is a Monte Carlo computer simulation of essential aspects of Terminal Control Area (TCA) air traffic movements that would be affected by facility outages. The model can also evaluate delay effects due to other factors...

CARE 3 user-friendly interface user's guide

NASA Technical Reports Server (NTRS)

Martensen, A. L.

1987-01-01

CARE 3 predicts the unreliability of highly reliable reconfigurable fault-tolerant systems that include redundant computers or computer systems. CARE3MENU is a user-friendly interface used to create an input for the CARE 3 program. The CARE3MENU interface has been designed to minimize user input errors. Although a CARE3MENU session may be successfully completed and all parameters may be within specified limits or ranges, the CARE 3 program is not guaranteed to produce meaningful results if the user incorrectly interprets the CARE 3 stochastic model. The CARE3MENU User Guide provides complete information on how to create a CARE 3 model with the interface. The CARE3MENU interface runs under the VAX/VMS operating system.

Perceived usefulness, perceived ease of use, and perceived enjoyment as drivers for the user acceptance of interactive mobile maps

NASA Astrophysics Data System (ADS)

Hussain, Azham; Mkpojiogu, Emmanuel O. C.; Yusof, Muhammad Mat

2016-08-01

This study examines the user perception of usefulness, ease of use and enjoyment as drivers for the users' complex interaction with map on mobile devices. TAM model was used to evaluate users' intention to use and their acceptance of interactive mobile map using the above three beliefs as antecedents. Quantitative research (survey) methodology was employed and the analysis and findings showed that all the three explanatory variables used in this study, explain the variability in the user acceptance of interactive mobile map technology. Perceived usefulness, perceived ease of use, and perceived enjoyment each have significant positive influence on user acceptance of interactive mobile maps. This study further validates the TAM model.

GEOS-5 Chemistry Transport Model User's Guide

NASA Technical Reports Server (NTRS)

Kouatchou, J.; Molod, A.; Nielsen, J. E.; Auer, B.; Putman, W.; Clune, T.

2015-01-01

The Goddard Earth Observing System version 5 (GEOS-5) General Circulation Model (GCM) makes use of the Earth System Modeling Framework (ESMF) to enable model configurations with many functions. One of the options of the GEOS-5 GCM is the GEOS-5 Chemistry Transport Model (GEOS-5 CTM), which is an offline simulation of chemistry and constituent transport driven by a specified meteorology and other model output fields. This document describes the basic components of the GEOS-5 CTM, and is a user's guide on to how to obtain and run simulations on the NCCS Discover platform. In addition, we provide information on how to change the model configuration input files to meet users' needs.

Development of interactive graphic user interfaces for modeling reaction-based biogeochemical processes in batch systems with BIOGEOCHEM

NASA Astrophysics Data System (ADS)

Chang, C.; Li, M.; Yeh, G.

2010-12-01

The BIOGEOCHEM numerical model (Yeh and Fang, 2002; Fang et al., 2003) was developed with FORTRAN for simulating reaction-based geochemical and biochemical processes with mixed equilibrium and kinetic reactions in batch systems. A complete suite of reactions including aqueous complexation, adsorption/desorption, ion-exchange, redox, precipitation/dissolution, acid-base reactions, and microbial mediated reactions were embodied in this unique modeling tool. Any reaction can be treated as fast/equilibrium or slow/kinetic reaction. An equilibrium reaction is modeled with an implicit finite rate governed by a mass action equilibrium equation or by a user-specified algebraic equation. A kinetic reaction is modeled with an explicit finite rate with an elementary rate, microbial mediated enzymatic kinetics, or a user-specified rate equation. None of the existing models has encompassed this wide array of scopes. To ease the input/output learning curve using the unique feature of BIOGEOCHEM, an interactive graphic user interface was developed with the Microsoft Visual Studio and .Net tools. Several user-friendly features, such as pop-up help windows, typo warning messages, and on-screen input hints, were implemented, which are robust. All input data can be real-time viewed and automated to conform with the input file format of BIOGEOCHEM. A post-processor for graphic visualizations of simulated results was also embedded for immediate demonstrations. By following data input windows step by step, errorless BIOGEOCHEM input files can be created even if users have little prior experiences in FORTRAN. With this user-friendly interface, the time effort to conduct simulations with BIOGEOCHEM can be greatly reduced.

Modeling and evaluating user behavior in exploratory visual analysis

DOE Office of Scientific and Technical Information (OSTI.GOV)

Reda, Khairi; Johnson, Andrew E.; Papka, Michael E.

Empirical evaluation methods for visualizations have traditionally focused on assessing the outcome of the visual analytic process as opposed to characterizing how that process unfolds. There are only a handful of methods that can be used to systematically study how people use visualizations, making it difficult for researchers to capture and characterize the subtlety of cognitive and interaction behaviors users exhibit during visual analysis. To validate and improve visualization design, however, it is important for researchers to be able to assess and understand how users interact with visualization systems under realistic scenarios. This paper presents a methodology for modeling andmore » evaluating the behavior of users in exploratory visual analysis. We model visual exploration using a Markov chain process comprising transitions between mental, interaction, and computational states. These states and the transitions between them can be deduced from a variety of sources, including verbal transcripts, videos and audio recordings, and log files. This model enables the evaluator to characterize the cognitive and computational processes that are essential to insight acquisition in exploratory visual analysis, and reconstruct the dynamics of interaction between the user and the visualization system. We illustrate this model with two exemplar user studies, and demonstrate the qualitative and quantitative analytical tools it affords.« less

A power information user (PIU) model to promote information integration in Tennessee's public health community.

PubMed

Sathe, Nila A; Lee, Patricia; Giuse, Nunzia Bettinsoli

2004-10-01

Observation and immersion in the user community are critical factors in designing and implementing informatics solutions; such practices ensure relevant interventions and promote user acceptance. Libraries can adapt these strategies to developing instruction and outreach. While needs assessment is typically a core facet of library instruction, sustained, iterative assessment underlying the development of user-centered instruction is key to integrating resource use into the workflow. This paper describes the Eskind Biomedical Library's (EBL's) recent work with the Tennessee public health community to articulate a training model centered around developing power information users (PIUs). PIUs are community-based individuals with an advanced understanding of information seeking and resource use and are committed to championing information integration. As model development was informed by observation of PIU workflow and information needs, it also allowed for informal testing of the applicability of assessment via domain immersion in library outreach. Though the number of PIUs involved in the project was small, evaluation indicated that the model was useful for promoting information use in PIU workgroups and that the concept of domain immersion was relevant to library-related projects. Moreover, EBL continues to employ principles of domain understanding inherent in the PIU model to develop further interventions for the public health community and library users.

Quantitative Analysis Of User Interfaces For Large Electronic Home Appliances And Mobile Devices Based On Lifestyle Categorization Of Older Users.

PubMed

Shin, Wonkyoung; Park, Minyong

2017-01-01

Background/Study Context: The increasing longevity and health of older users as well as aging populations has created the need to develop senior-oriented product interfaces. This study aims to find user interface (UI) priorities according to older user groups based on their lifestyle and develop quality of UI (QUI) models for large electronic home appliances and mobile products. A segmentation table designed to show how older users can be categorized was created through a review of the literature to survey 252 subjects with a questionnaire. Factor analysis was performed to extract six preliminary lifestyle factors, which were then used for subsequent cluster analysis. The analysis resulted in four groups. Cross-analysis was carried out to investigate which characteristics were included in the groups. Analysis of variance was then applied to investigate the differences in the UI priorities among the user groups for various electronic devices. Finally, QUI models were developed and applied to those electronic devices. Differences in UI priorities were found according to the four lifestyles ("money-oriented," "innovation-oriented," "stability- and simplicity-oriented," and "innovation- and intellectual-oriented"). Twelve QUI models were developed for four different lifestyle groups associated with different products. Three washers and three smartphones were used as an example for testing the QUI models. The UI differences of the older user groups by the segmentation in this study using several key (i.e., demographic, socioeconomic, and physical-cognitive) variables are distinct from earlier studies made by a single variable. The differences in responses clearly indicate the benefits of integrating various factors of older users, rather than single variable, in order to design and develop more innovative and better consumer products in the future. The results of this study showed that older users with a potentially high buying power in the future are likely to have higher satisfaction when selecting products customized for their lifestyle. Designers could also use the results of UI evaluation for older users based on their lifestyle before developing products through QUI modeling. This approach would save time and costs.

Support of surgical process modeling by using adaptable software user interfaces

NASA Astrophysics Data System (ADS)

Neumuth, T.; Kaschek, B.; Czygan, M.; Goldstein, D.; Strauß, G.; Meixensberger, J.; Burgert, O.

2010-03-01

Surgical Process Modeling (SPM) is a powerful method for acquiring data about the evolution of surgical procedures. Surgical Process Models are used in a variety of use cases including evaluation studies, requirements analysis and procedure optimization, surgical education, and workflow management scheme design. This work proposes the use of adaptive, situation-aware user interfaces for observation support software for SPM. We developed a method to support the modeling of the observer by using an ontological knowledge base. This is used to drive the graphical user interface for the observer to restrict the search space of terminology depending on the current situation. In the evaluation study it is shown, that the workload of the observer was decreased significantly by using adaptive user interfaces. 54 SPM observation protocols were analyzed by using the NASA Task Load Index and it was shown that the use of the adaptive user interface disburdens the observer significantly in workload criteria effort, mental demand and temporal demand, helping him to concentrate on his essential task of modeling the Surgical Process.

A Multilayer Naïve Bayes Model for Analyzing User's Retweeting Sentiment Tendency.

PubMed

Wang, Mengmeng; Zuo, Wanli; Wang, Ying

2015-01-01

Today microblogging has increasingly become a means of information diffusion via user's retweeting behavior. Since retweeting content, as context information of microblogging, is an understanding of microblogging, hence, user's retweeting sentiment tendency analysis has gradually become a hot research topic. Targeted at online microblogging, a dynamic social network, we investigate how to exploit dynamic retweeting sentiment features in retweeting sentiment tendency analysis. On the basis of time series of user's network structure information and published text information, we first model dynamic retweeting sentiment features. Then we build Naïve Bayes models from profile-, relationship-, and emotion-based dimensions, respectively. Finally, we build a multilayer Naïve Bayes model based on multidimensional Naïve Bayes models to analyze user's retweeting sentiment tendency towards a microblog. Experiments on real-world dataset demonstrate the effectiveness of the proposed framework. Further experiments are conducted to understand the importance of dynamic retweeting sentiment features and temporal information in retweeting sentiment tendency analysis. What is more, we provide a new train of thought for retweeting sentiment tendency analysis in dynamic social networks.

User's guide to SSARRMENU

USGS Publications Warehouse

Mastin, M.C.; Le, Thanh

2001-01-01

The U.S. Geological Survey, in cooperation with Pierce County Department of Public Works, Washington, has developed an operational tool called the Puyallup Flood-Alert System to alert users of impending floods in the Puyallup River Basin. The system acquires and incorporates meteorological and hydrological data into the Streamflow Synthesis and Reservoir Regulation (SSARR) hydrologic flow-routing model to simulate floods in the Puyallup River Basin. SSARRMENU is the user-interactive graphical interface between the user, the input and output data, and the SSARR model. In a companion cooperative project with Pierce County, the SSARR model for the Puyallup River Basin was calibrated and validated. The calibrated model is accessed through SSARRMENU, which has been specifically programed for the Puyallup River and the needs of Pierce County. SSARRMENU automates the retrieval of data from ADAPS (Automated DAta Processing System, the U.S. Geological Survey?s real-time hydrologic database), formats the data for use with SSARR, initiates SSARR model runs, displays alerts for impending floods, and provides utilities to display the simulated and observed data. An on-screen map of the basin and a series of menu items provide the user wi

Echo Chambers: Emotional Contagion and Group Polarization on Facebook.

PubMed

Del Vicario, Michela; Vivaldo, Gianna; Bessi, Alessandro; Zollo, Fabiana; Scala, Antonio; Caldarelli, Guido; Quattrociocchi, Walter

2016-12-01

Recent findings showed that users on Facebook tend to select information that adhere to their system of beliefs and to form polarized groups - i.e., echo chambers. Such a tendency dominates information cascades and might affect public debates on social relevant issues. In this work we explore the structural evolution of communities of interest by accounting for users emotions and engagement. Focusing on the Facebook pages reporting on scientific and conspiracy content, we characterize the evolution of the size of the two communities by fitting daily resolution data with three growth models - i.e. the Gompertz model, the Logistic model, and the Log-logistic model. Although all the models appropriately describe the data structure, the Logistic one shows the best fit. Then, we explore the interplay between emotional state and engagement of users in the group dynamics. Our findings show that communities' emotional behavior is affected by the users' involvement inside the echo chamber. Indeed, to an higher involvement corresponds a more negative approach. Moreover, we observe that, on average, more active users show a faster shift towards the negativity than less active ones.

ReMatch: a web-based tool to construct, store and share stoichiometric metabolic models with carbon maps for metabolic flux analysis.

PubMed

Pitkänen, Esa; Akerlund, Arto; Rantanen, Ari; Jouhten, Paula; Ukkonen, Esko

2008-08-25

ReMatch is a web-based, user-friendly tool that constructs stoichiometric network models for metabolic flux analysis, integrating user-developed models into a database collected from several comprehensive metabolic data resources, including KEGG, MetaCyc and CheBI. Particularly, ReMatch augments the metabolic reactions of the model with carbon mappings to facilitate (13)C metabolic flux analysis. The construction of a network model consisting of biochemical reactions is the first step in most metabolic modelling tasks. This model construction can be a tedious task as the required information is usually scattered to many separate databases whose interoperability is suboptimal, due to the heterogeneous naming conventions of metabolites in different databases. Another, particularly severe data integration problem is faced in (13)C metabolic flux analysis, where the mappings of carbon atoms from substrates into products in the model are required. ReMatch has been developed to solve the above data integration problems. First, ReMatch matches the imported user-developed model against the internal ReMatch database while considering a comprehensive metabolite name thesaurus. This, together with wild card support, allows the user to specify the model quickly without having to look the names up manually. Second, ReMatch is able to augment reactions of the model with carbon mappings, obtained either from the internal database or given by the user with an easy-touse tool. The constructed models can be exported into 13C-FLUX and SBML file formats. Further, a stoichiometric matrix and visualizations of the network model can be generated. The constructed models of metabolic networks can be optionally made available to the other users of ReMatch. Thus, ReMatch provides a common repository for metabolic network models with carbon mappings for the needs of metabolic flux analysis community. ReMatch is freely available for academic use at http://www.cs.helsinki.fi/group/sysfys/software/rematch/.

Rational analyses of information foraging on the web.

PubMed

Pirolli, Peter

2005-05-06

This article describes rational analyses and cognitive models of Web users developed within information foraging theory. This is done by following the rational analysis methodology of (a) characterizing the problems posed by the environment, (b) developing rational analyses of behavioral solutions to those problems, and (c) developing cognitive models that approach the realization of those solutions. Navigation choice is modeled as a random utility model that uses spreading activation mechanisms that link proximal cues (information scent) that occur in Web browsers to internal user goals. Web-site leaving is modeled as an ongoing assessment by the Web user of the expected benefits of continuing at a Web site as opposed to going elsewhere. These cost-benefit assessments are also based on spreading activation models of information scent. Evaluations include a computational model of Web user behavior called Scent-Based Navigation and Information Foraging in the ACT Architecture, and the Law of Surfing, which characterizes the empirical distribution of the length of paths of visitors at a Web site. 2005 Lawrence Erlbaum Associates, Inc.

Setting up recovery clinics and promoting service user involvement.

PubMed

John, Thomas

2017-06-22

Service user involvement in mental health has gained considerable momentum. Evidence from the literature suggests that it remains largely theoretical rather than being put into practice. The current nature of acute inpatient mental health units creates various challenges for nurses to put this concept into practice. Recovery clinics were introduced to bridge this gap and to promote service user involvement practice within the current care delivery model at Kent and Medway NHS and Social Care Partnership Trust. It has shaped new ways of working for nurses with a person-centred approach as its philosophy. Service users and nurses were involved in implementing a needs-led and bottom-up initiative using Kotter's change model. Initial results suggest that it has been successful in meeting its objectives evidenced through increased meaningful interactions and involvement in care by service users and carers. The clinics have gained wide recognition and have highlighted a need for further research into care delivery models to promote service user involvement in these units.

Coarse cluster enhancing collaborative recommendation for social network systems

NASA Astrophysics Data System (ADS)

Zhao, Yao-Dong; Cai, Shi-Min; Tang, Ming; Shang, Min-Sheng

2017-10-01

Traditional collaborative filtering based recommender systems for social network systems bring very high demands on time complexity due to computing similarities of all pairs of users via resource usages and annotation actions, which thus strongly suppresses recommending speed. In this paper, to overcome this drawback, we propose a novel approach, namely coarse cluster that partitions similar users and associated items at a high speed to enhance user-based collaborative filtering, and then develop a fast collaborative user model for the social tagging systems. The experimental results based on Delicious dataset show that the proposed model is able to dramatically reduce the processing time cost greater than 90 % and relatively improve the accuracy in comparison with the ordinary user-based collaborative filtering, and is robust for the initial parameter. Most importantly, the proposed model can be conveniently extended by introducing more users' information (e.g., profiles) and practically applied for the large-scale social network systems to enhance the recommending speed without accuracy loss.

The System Dynamics Model User Sustainability Explorer (SD-MUSE): a user-friendly tool for interpreting system dynamic models

EPA Science Inventory

System Dynamics (SD) models are useful for holistic integration of data to evaluate indirect and cumulative effects and inform decisions. Complex SD models can provide key insights into how decisions affect the three interconnected pillars of sustainability. However, the complexi...

Language workbench user interfaces for data analysis

PubMed Central

Benson, Victoria M.

2015-01-01

Biological data analysis is frequently performed with command line software. While this practice provides considerable flexibility for computationally savy individuals, such as investigators trained in bioinformatics, this also creates a barrier to the widespread use of data analysis software by investigators trained as biologists and/or clinicians. Workflow systems such as Galaxy and Taverna have been developed to try and provide generic user interfaces that can wrap command line analysis software. These solutions are useful for problems that can be solved with workflows, and that do not require specialized user interfaces. However, some types of analyses can benefit from custom user interfaces. For instance, developing biomarker models from high-throughput data is a type of analysis that can be expressed more succinctly with specialized user interfaces. Here, we show how Language Workbench (LW) technology can be used to model the biomarker development and validation process. We developed a language that models the concepts of Dataset, Endpoint, Feature Selection Method and Classifier. These high-level language concepts map directly to abstractions that analysts who develop biomarker models are familiar with. We found that user interfaces developed in the Meta-Programming System (MPS) LW provide convenient means to configure a biomarker development project, to train models and view the validation statistics. We discuss several advantages of developing user interfaces for data analysis with a LW, including increased interface consistency, portability and extension by language composition. The language developed during this experiment is distributed as an MPS plugin (available at http://campagnelab.org/software/bdval-for-mps/). PMID:25755929

Four principles for user interface design of computerised clinical decision support systems.

PubMed

Kanstrup, Anne Marie; Christiansen, Marion Berg; Nøhr, Christian

2011-01-01

The paper presents results from a design research project of a user interface (UI) for a Computerised Clinical Decision Support System (CDSS). The ambition has been to design Human-Computer Interaction (HCI) that can minimise medication errors. Through an iterative design process a digital prototype for prescription of medicine has been developed. This paper presents results from the formative evaluation of the prototype conducted in a simulation laboratory with ten participating physicians. Data from the simulation is analysed by use of theory on how users perceive information. The conclusion is a model, which sum up four principles of interaction for design of CDSS. The four principles for design of user interfaces for CDSS are summarised as four A's: All in one, At a glance, At hand and Attention. The model emphasises integration of all four interaction principles in the design of user interfaces for CDSS, i.e. the model is an integrated model which we suggest as a guide for interaction design when working with preventing medication errors.

CAD-CAM database management at Bendix Kansas City

DOE Office of Scientific and Technical Information (OSTI.GOV)

Witte, D.R.

1985-05-01

The Bendix Kansas City Division of Allied Corporation began integrating mechanical CAD-CAM capabilities into its operations in June 1980. The primary capabilities include a wireframe modeling application, a solid modeling application, and the Bendix Integrated Computer Aided Manufacturing (BICAM) System application, a set of software programs and procedures which provides user-friendly access to graphic applications and data, and user-friendly sharing of data between applications and users. BICAM also provides for enforcement of corporate/enterprise policies. Three access categories, private, local, and global, are realized through the implementation of data-management metaphors: the desk, reading rack, file cabinet, and library are for themore » storage, retrieval, and sharing of drawings and models. Access is provided through menu selections; searching for designs is done by a paging method or a search-by-attribute-value method. The sharing of designs between all users of Part Data is key. The BICAM System supports 375 unique users per quarter and manages over 7500 drawings and models. The BICAM System demonstrates the need for generalized models, a high-level system framework, prototyping, information-modeling methods, and an understanding of the entire enterprise. Future BICAM System implementations are planned to take advantage of this knowledge.« less

A user-friendly software package to ease the use of VIC hydrologic model for practitioners

NASA Astrophysics Data System (ADS)

Wi, S.; Ray, P.; Brown, C.

2016-12-01

The VIC (Variable Infiltration Capacity) hydrologic and river routing model simulates the water and energy fluxes that occur near the land surface and provides users with useful information regarding the quantity and timing of available water at points of interest within the basin. However, despite its popularity (proved by numerous applications in the literature), its wider adoption is hampered by the considerable effort required to prepare model inputs; e.g., input files storing spatial information related to watershed topography, soil properties, and land cover. This study presents a user-friendly software package (named VIC Setup Toolkit) developed within the MATLAB (matrix laboratory) framework and accessible through an intuitive graphical user interface. The VIC Setup Toolkit enables users to navigate the model building process confidently through prompts and automation, with an intention to promote the use of the model for both practical and academic purposes. The automated processes include watershed delineation, climate and geographical input set-up, model parameter calibration, graph generation and output evaluation. We demonstrate the package's usefulness in various case studies with the American River, Oklahoma River, Feather River and Zambezi River basins.

The PMDB Protein Model Database

PubMed Central

Castrignanò, Tiziana; De Meo, Paolo D'Onorio; Cozzetto, Domenico; Talamo, Ivano Giuseppe; Tramontano, Anna

2006-01-01

The Protein Model Database (PMDB) is a public resource aimed at storing manually built 3D models of proteins. The database is designed to provide access to models published in the scientific literature, together with validating experimental data. It is a relational database and it currently contains >74 000 models for ∼240 proteins. The system is accessible at and allows predictors to submit models along with related supporting evidence and users to download them through a simple and intuitive interface. Users can navigate in the database and retrieve models referring to the same target protein or to different regions of the same protein. Each model is assigned a unique identifier that allows interested users to directly access the data. PMID:16381873

AUI&GIV: Recommendation with Asymmetric User Influence and Global Importance Value.

PubMed

Zhao, Zhi-Lin; Wang, Chang-Dong; Lai, Jian-Huang

2016-01-01

The user-based collaborative filtering (CF) algorithm is one of the most popular approaches for making recommendation. Despite its success, the traditional user-based CF algorithm suffers one serious problem that it only measures the influence between two users based on their symmetric similarities calculated by their consumption histories. It means that, for a pair of users, the influences on each other are the same, which however may not be true. Intuitively, an expert may have an impact on a novice user but a novice user may not affect an expert at all. Besides, each user may possess a global importance factor that affects his/her influence to the remaining users. To this end, in this paper, we propose an asymmetric user influence model to measure the directed influence between two users and adopt the PageRank algorithm to calculate the global importance value of each user. And then the directed influence values and the global importance values are integrated to deduce the final influence values between two users. Finally, we use the final influence values to improve the performance of the traditional user-based CF algorithm. Extensive experiments have been conducted, the results of which have confirmed that both the asymmetric user influence model and global importance value play key roles in improving recommendation accuracy, and hence the proposed method significantly outperforms the existing recommendation algorithms, in particular the user-based CF algorithm on the datasets of high rating density.

AUI&GIV: Recommendation with Asymmetric User Influence and Global Importance Value

PubMed Central

Zhao, Zhi-Lin; Wang, Chang-Dong; Lai, Jian-Huang

2016-01-01

The user-based collaborative filtering (CF) algorithm is one of the most popular approaches for making recommendation. Despite its success, the traditional user-based CF algorithm suffers one serious problem that it only measures the influence between two users based on their symmetric similarities calculated by their consumption histories. It means that, for a pair of users, the influences on each other are the same, which however may not be true. Intuitively, an expert may have an impact on a novice user but a novice user may not affect an expert at all. Besides, each user may possess a global importance factor that affects his/her influence to the remaining users. To this end, in this paper, we propose an asymmetric user influence model to measure the directed influence between two users and adopt the PageRank algorithm to calculate the global importance value of each user. And then the directed influence values and the global importance values are integrated to deduce the final influence values between two users. Finally, we use the final influence values to improve the performance of the traditional user-based CF algorithm. Extensive experiments have been conducted, the results of which have confirmed that both the asymmetric user influence model and global importance value play key roles in improving recommendation accuracy, and hence the proposed method significantly outperforms the existing recommendation algorithms, in particular the user-based CF algorithm on the datasets of high rating density. PMID:26828803

JEDI for Advanced Users | Jobs and Economic Development Impact Models |

Science.gov Websites

NREL for Advanced Users JEDI for Advanced Users The Jobs and Economic Development Impact (JEDI discussion. Users with more experience with power generation projects and/or economic impact analysis can Economic Analysis provides data for more than 400 economic sectors. Advanced users can refer to these

Users' Interaction with World Wide Web Resources: An Exploratory Study Using a Holistic Approach.

ERIC Educational Resources Information Center

Wang, Peiling; Hawk, William B.; Tenopir, Carol

2000-01-01

Presents results of a study that explores factors of user-Web interaction in finding factual information, develops a conceptual framework for studying user-Web interaction, and applies a process-tracing method for conducting holistic user-Web studies. Describes measurement techniques and proposes a model consisting of the user, interface, and the…

Snaps, Selfies, and Shares: How Three Popular Social Media Platforms Contribute to the Sociocultural Model of Disordered Eating Among Young Women.

PubMed

Saunders, Jessica F; Eaton, Asia A

2018-06-01

The current study aimed to integrate and test the sociocultural model of disordered eating with theories explaining the impact of mass media on the development of disordered eating for users of three popular social networking platforms. Young women social networking site (SNS) users (age 18-24) who had never received an eating disorder diagnosis (N = 637) completed questions capturing their SNS gratifications and usage, body surveillance, social comparisons, body dissatisfaction, and eating pathology. Measures were administered in one online session. Model relationships were similar across users of all three SNS platforms: Facebook, Instagram, and Snapchat. Users of all platforms demonstrated a significant positive relationship between upward comparisons and disordered eating outcomes, and between body surveillance and disordered eating outcomes, although differences between models did emerge. Empirical findings support extending the sociocultural model of disordered eating to include SNS uses and gratifications.

User Acceptance of Social Learning Systems in Higher Education: An Application of the Extended Technology Acceptance Model

ERIC Educational Resources Information Center

Akman, Ibrahim; Turhan, Cigdem

2017-01-01

This study aims to explore the users' behaviour and acceptance of social media for learning in higher educational institutions with the help of the extended Technology Acceptance Model (TAM). TAM has been extended to investigate how ethical and security awareness of users affect the actual usage of social learning applications. For this purpose, a…

Initialization of high resolution surface wind simulations using NWS gridded data

Treesearch

J. Forthofer; K. Shannon; Bret Butler

2010-01-01

WindNinja is a standalone computer model designed to provide the user with simulations of surface wind flow. It is deterministic and steady state. It is currently being modified to allow the user to initialize the flow calculation using National Digital Forecast Database. It essentially allows the user to downscale the coarse scale simulations from meso-scale models to...

User-defined Material Model for Thermo-mechanical Progressive Failure Analysis

NASA Technical Reports Server (NTRS)

Knight, Norman F., Jr.

2008-01-01

Previously a user-defined material model for orthotropic bimodulus materials was developed for linear and nonlinear stress analysis of composite structures using either shell or solid finite elements within a nonlinear finite element analysis tool. Extensions of this user-defined material model to thermo-mechanical progressive failure analysis are described, and the required input data are documented. The extensions include providing for temperature-dependent material properties, archival of the elastic strains, and a thermal strain calculation for materials exhibiting a stress-free temperature.

Simulation of streamflows and basin-wide hydrologic variables over several climate-change scenarios, Methow River basin, Washington

USGS Publications Warehouse

Voss, Frank D.; Mastin, Mark C.

2012-01-01

A database was developed to automate model execution and to provide users with Internet access to voluminous data products ranging from summary figures to model output timeseries. Database-enabled Internet tools were developed to allow users to create interactive graphs of output results based on their analysis needs. For example, users were able to create graphs by selecting time intervals, greenhouse gas emission scenarios, general circulation models, and specific hydrologic variables.

USER'S MANUAL FOR THE INSTREAM SEDIMENT-CONTAMINANT TRANSPORT MODEL SERATRA

EPA Science Inventory

This manual guides the user in applying the sediment-contaminant transport model SERATRA. SERATRA is an unsteady, two-dimensional code that uses the finite element computation method with the Galerkin weighted residual technique. The model has general convection-diffusion equatio...

SIMULATION MODEL FOR WATERSHED MANAGEMENT PLANNING. VOLUME 2. MODEL USER MANUAL

EPA Science Inventory

This report provides a user manual for the hydrologic, nonpoint source pollution simulation of the generalized planning model for evaluating forest and farming management alternatives. The manual contains an explanation of application of specific code and indicates changes that s...

Human-centric predictive model of task difficulty for human-in-the-loop control tasks

PubMed Central

Majewicz Fey, Ann

2018-01-01

Quantitatively measuring the difficulty of a manipulation task in human-in-the-loop control systems is ill-defined. Currently, systems are typically evaluated through task-specific performance measures and post-experiment user surveys; however, these methods do not capture the real-time experience of human users. In this study, we propose to analyze and predict the difficulty of a bivariate pointing task, with a haptic device interface, using human-centric measurement data in terms of cognition, physical effort, and motion kinematics. Noninvasive sensors were used to record the multimodal response of human user for 14 subjects performing the task. A data-driven approach for predicting task difficulty was implemented based on several task-independent metrics. We compare four possible models for predicting task difficulty to evaluated the roles of the various types of metrics, including: (I) a movement time model, (II) a fusion model using both physiological and kinematic metrics, (III) a model only with kinematic metrics, and (IV) a model only with physiological metrics. The results show significant correlation between task difficulty and the user sensorimotor response. The fusion model, integrating user physiology and motion kinematics, provided the best estimate of task difficulty (R2 = 0.927), followed by a model using only kinematic metrics (R2 = 0.921). Both models were better predictors of task difficulty than the movement time model (R2 = 0.847), derived from Fitt’s law, a well studied difficulty model for human psychomotor control. PMID:29621301

Activity-Centered Domain Characterization for Problem-Driven Scientific Visualization

PubMed Central

Marai, G. Elisabeta

2018-01-01

Although visualization design models exist in the literature in the form of higher-level methodological frameworks, these models do not present a clear methodological prescription for the domain characterization step. This work presents a framework and end-to-end model for requirements engineering in problem-driven visualization application design. The framework and model are based on the activity-centered design paradigm, which is an enhancement of human-centered design. The proposed activity-centered approach focuses on user tasks and activities, and allows an explicit link between the requirements engineering process with the abstraction stage—and its evaluation—of existing, higher-level visualization design models. In a departure from existing visualization design models, the resulting model: assigns value to a visualization based on user activities; ranks user tasks before the user data; partitions requirements in activity-related capabilities and nonfunctional characteristics and constraints; and explicitly incorporates the user workflows into the requirements process. A further merit of this model is its explicit integration of functional specifications, a concept this work adapts from the software engineering literature, into the visualization design nested model. A quantitative evaluation using two sets of interdisciplinary projects supports the merits of the activity-centered model. The result is a practical roadmap to the domain characterization step of visualization design for problem-driven data visualization. Following this domain characterization model can help remove a number of pitfalls that have been identified multiple times in the visualization design literature. PMID:28866550

Incorporating User Input in Template-Based Segmentation

PubMed Central

Vidal, Camille; Beggs, Dale; Younes, Laurent; Jain, Sanjay K.; Jedynak, Bruno

2015-01-01

We present a simple and elegant method to incorporate user input in a template-based segmentation method for diseased organs. The user provides a partial segmentation of the organ of interest, which is used to guide the template towards its target. The user also highlights some elements of the background that should be excluded from the final segmentation. We derive by likelihood maximization a registration algorithm from a simple statistical image model in which the user labels are modeled as Bernoulli random variables. The resulting registration algorithm minimizes the sum of square differences between the binary template and the user labels, while preventing the template from shrinking, and penalizing for the inclusion of background elements into the final segmentation. We assess the performance of the proposed algorithm on synthetic images in which the amount of user annotation is controlled. We demonstrate our algorithm on the segmentation of the lungs of Mycobacterium tuberculosis infected mice from μCT images. PMID:26146532

An Overview of the GIS Weasel

USGS Publications Warehouse

Viger, Roland J.

2008-01-01

This fact sheet provides a high-level description of the GIS Weasel, a software system designed to aid users in preparing spatial information as input to lumped and distributed parameter environmental simulation models (ESMs). The GIS Weasel provides geographic information system (GIS) tools to help create maps of geographic features relevant to the application of a user?s ESM and to generate parameters from those maps. The operation of the GIS Weasel does not require a user to be a GIS expert, only that a user has an understanding of the spatial information requirements of the model. The GIS Weasel software system provides a GIS-based graphical user interface (GUI), C programming language executables, and general utility scripts. The software will run on any computing platform where ArcInfo Workstation (version 8.1 or later) and the GRID extension are accessible. The user controls the GIS Weasel by interacting with menus, maps, and tables.

User's manual for interactive LINEAR: A FORTRAN program to derive linear aircraft models

NASA Technical Reports Server (NTRS)

Antoniewicz, Robert F.; Duke, Eugene L.; Patterson, Brian P.

1988-01-01

An interactive FORTRAN program that provides the user with a powerful and flexible tool for the linearization of aircraft aerodynamic models is documented in this report. The program LINEAR numerically determines a linear system model using nonlinear equations of motion and a user-supplied linear or nonlinear aerodynamic model. The nonlinear equations of motion used are six-degree-of-freedom equations with stationary atmosphere and flat, nonrotating earth assumptions. The system model determined by LINEAR consists of matrices for both the state and observation equations. The program has been designed to allow easy selection and definition of the state, control, and observation variables to be used in a particular model.

Development of 3D browsing and interactive web system

NASA Astrophysics Data System (ADS)

Shi, Xiaonan; Fu, Jian; Jin, Chaolin

2017-09-01

In the current market, users need to download specific software or plug-ins to browse the 3D model, and browsing the system may be unstable, and it cannot be 3D model interaction issues In order to solve this problem, this paper presents a solution to the interactive browsing of the model in the server-side parsing model, and when the system is applied, the user only needs to input the system URL and upload the 3D model file to operate the browsing The server real-time parsing 3D model, the interactive response speed, these completely follows the user to walk the minimalist idea, and solves the current market block 3D content development question.

Distributed user interfaces for clinical ubiquitous computing applications.

PubMed

Bång, Magnus; Larsson, Anders; Berglund, Erik; Eriksson, Henrik

2005-08-01

Ubiquitous computing with multiple interaction devices requires new interface models that support user-specific modifications to applications and facilitate the fast development of active workspaces. We have developed NOSTOS, a computer-augmented work environment for clinical personnel to explore new user interface paradigms for ubiquitous computing. NOSTOS uses several devices such as digital pens, an active desk, and walk-up displays that allow the system to track documents and activities in the workplace. We present the distributed user interface (DUI) model that allows standalone applications to distribute their user interface components to several devices dynamically at run-time. This mechanism permit clinicians to develop their own user interfaces and forms to clinical information systems to match their specific needs. We discuss the underlying technical concepts of DUIs and show how service discovery, component distribution, events and layout management are dealt with in the NOSTOS system. Our results suggest that DUIs--and similar network-based user interfaces--will be a prerequisite of future mobile user interfaces and essential to develop clinical multi-device environments.

The good, the bad and the dubious: VHELIBS, a validation helper for ligands and binding sites

PubMed Central

2013-01-01

Background Many Protein Data Bank (PDB) users assume that the deposited structural models are of high quality but forget that these models are derived from the interpretation of experimental data. The accuracy of atom coordinates is not homogeneous between models or throughout the same model. To avoid basing a research project on a flawed model, we present a tool for assessing the quality of ligands and binding sites in crystallographic models from the PDB. Results The Validation HElper for LIgands and Binding Sites (VHELIBS) is software that aims to ease the validation of binding site and ligand coordinates for non-crystallographers (i.e., users with little or no crystallography knowledge). Using a convenient graphical user interface, it allows one to check how ligand and binding site coordinates fit to the electron density map. VHELIBS can use models from either the PDB or the PDB_REDO databank of re-refined and re-built crystallographic models. The user can specify threshold values for a series of properties related to the fit of coordinates to electron density (Real Space R, Real Space Correlation Coefficient and average occupancy are used by default). VHELIBS will automatically classify residues and ligands as Good, Dubious or Bad based on the specified limits. The user is also able to visually check the quality of the fit of residues and ligands to the electron density map and reclassify them if needed. Conclusions VHELIBS allows inexperienced users to examine the binding site and the ligand coordinates in relation to the experimental data. This is an important step to evaluate models for their fitness for drug discovery purposes such as structure-based pharmacophore development and protein-ligand docking experiments. PMID:23895374

Rapid Prototyping of Hydrologic Model Interfaces with IPython

NASA Astrophysics Data System (ADS)

Farthing, M. W.; Winters, K. D.; Ahmadia, A. J.; Hesser, T.; Howington, S. E.; Johnson, B. D.; Tate, J.; Kees, C. E.

2014-12-01

A significant gulf still exists between the state of practice and state of the art in hydrologic modeling. Part of this gulf is due to the lack of adequate pre- and post-processing tools for newly developed computational models. The development of user interfaces has traditionally lagged several years behind the development of a particular computational model or suite of models. As a result, models with mature interfaces often lack key advancements in model formulation, solution methods, and/or software design and technology. Part of the problem has been a focus on developing monolithic tools to provide comprehensive interfaces for the entire suite of model capabilities. Such efforts require expertise in software libraries and frameworks for creating user interfaces (e.g., Tcl/Tk, Qt, and MFC). These tools are complex and require significant investment in project resources (time and/or money) to use. Moreover, providing the required features for the entire range of possible applications and analyses creates a cumbersome interface. For a particular site or application, the modeling requirements may be simplified or at least narrowed, which can greatly reduce the number and complexity of options that need to be accessible to the user. However, monolithic tools usually are not adept at dynamically exposing specific workflows. Our approach is to deliver highly tailored interfaces to users. These interfaces may be site and/or process specific. As a result, we end up with many, customized interfaces rather than a single, general-use tool. For this approach to be successful, it must be efficient to create these tailored interfaces. We need technology for creating quality user interfaces that is accessible and has a low barrier for integration into model development efforts. Here, we present efforts to leverage IPython notebooks as tools for rapid prototyping of site and application-specific user interfaces. We provide specific examples from applications in near-shore environments as well as levee analysis. We discuss our design decisions and methodology for developing customized interfaces, strategies for delivery of the interfaces to users in various computing environments, as well as implications for the design/implementation of simulation models.

Developing Formal Object-oriented Requirements Specifications: A Model, Tool and Technique.

ERIC Educational Resources Information Center

Jackson, Robert B.; And Others

1995-01-01

Presents a formal object-oriented specification model (OSS) for computer software system development that is supported by a tool that automatically generates a prototype from an object-oriented analysis model (OSA) instance, lets the user examine the prototype, and permits the user to refine the OSA model instance to generate a requirements…

NEEDS v.5.15 User Guide

EPA Pesticide Factsheets

View a user guide for the the updated National Electric Energy Data System (NEEDS), the database used to construct the model plants that represent existing and planned/committed units in EPA modeling applications.

ESPVI 4.0 ELECTROSTATIS PRECIPITATOR V-1 AND PERFORMANCE MODEL: USER'S MANUAL

EPA Science Inventory

The manual is the companion document for the microcomputer program ESPVI 4.0, Electrostatic Precipitation VI and Performance Model. The program was developed to provide a user- friendly interface to an advanced model of electrostatic precipitation (ESP) performance. The program i...

Modelling parallel programs and multiprocessor architectures with AXE

NASA Technical Reports Server (NTRS)

Yan, Jerry C.; Fineman, Charles E.

1991-01-01

AXE, An Experimental Environment for Parallel Systems, was designed to model and simulate for parallel systems at the process level. It provides an integrated environment for specifying computation models, multiprocessor architectures, data collection, and performance visualization. AXE is being used at NASA-Ames for developing resource management strategies, parallel problem formulation, multiprocessor architectures, and operating system issues related to the High Performance Computing and Communications Program. AXE's simple, structured user-interface enables the user to model parallel programs and machines precisely and efficiently. Its quick turn-around time keeps the user interested and productive. AXE models multicomputers. The user may easily modify various architectural parameters including the number of sites, connection topologies, and overhead for operating system activities. Parallel computations in AXE are represented as collections of autonomous computing objects known as players. Their use and behavior is described. Performance data of the multiprocessor model can be observed on a color screen. These include CPU and message routing bottlenecks, and the dynamic status of the software.

Enhancing Users' Participation in Business Process Modeling through Ontology-Based Training

NASA Astrophysics Data System (ADS)

Macris, A.; Malamateniou, F.; Vassilacopoulos, G.

Successful business process design requires active participation of users who are familiar with organizational activities and business process modelling concepts. Hence, there is a need to provide users with reusable, flexible, agile and adaptable training material in order to enable them instil their knowledge and expertise in business process design and automation activities. Knowledge reusability is of paramount importance in designing training material on process modelling since it enables users participate actively in process design/redesign activities stimulated by the changing business environment. This paper presents a prototype approach for the design and use of training material that provides significant advantages to both the designer (knowledge - content reusability and semantic web enabling) and the user (semantic search, knowledge navigation and knowledge dissemination). The approach is based on externalizing domain knowledge in the form of ontology-based knowledge networks (i.e. training scenarios serving specific training needs) so that it is made reusable.

Location Contexts of User Check-Ins to Model Urban Geo Life-Style Patterns

PubMed Central

Hasan, Samiul; Ukkusuri, Satish V.

2015-01-01

Geo-location data from social media offers us information, in new ways, to understand people's attitudes and interests through their activity choices. In this paper, we explore the idea of inferring individual life-style patterns from activity-location choices revealed in social media. We present a model to understand life-style patterns using the contextual information (e. g. location categories) of user check-ins. Probabilistic topic models are developed to infer individual geo life-style patterns from two perspectives: i) to characterize the patterns of user interests to different types of places and ii) to characterize the patterns of user visits to different neighborhoods. The method is applied to a dataset of Foursquare check-ins of the users from New York City. The co-existence of several location contexts and the corresponding probabilities in a given pattern provide useful information about user interests and choices. It is found that geo life-style patterns have similar items—either nearby neighborhoods or similar location categories. The semantic and geographic proximity of the items in a pattern reflects the hidden regularity in user preferences and location choice behavior. PMID:25970430

Involving older people in a multi-centre randomised trial of a complex intervention in pre-hospital emergency care: implementation of a collaborative model.

PubMed

Koniotou, Marina; Evans, Bridie Angela; Chatters, Robin; Fothergill, Rachael; Garnsworthy, Christopher; Gaze, Sarah; Halter, Mary; Mason, Suzanne; Peconi, Julie; Porter, Alison; Siriwardena, A Niroshan; Toghill, Alun; Snooks, Helen

2015-07-10

Health services research is expected to involve service users as active partners in the research process, but few examples report how this has been achieved in practice in trials. We implemented a model to involve service users in a multi-centre randomised controlled trial in pre-hospital emergency care. We used the generic Standard Operating Procedure (SOP) from our Clinical Trials Unit (CTU) as the basis for creating a model to fit the context and population of the SAFER 2 trial. In our model, we planned to involve service users at all stages in the trial through decision-making forums at 3 levels: 1) strategic; 2) site (e.g. Wales; London; East Midlands); 3) local. We linked with charities and community groups to recruit people with experience of our study population. We collected notes of meetings alongside other documentary evidence such as attendance records and study documentation to track how we implemented our model. We involved service users at strategic, site and local level. We also added additional strategic level forums (Task and Finish Groups and Writing Days) where we included service users. Service user involvement varied in frequency and type across meetings, research stages and locations but stabilised and increased as the trial progressed. Involving service users in the SAFER 2 trial showed how it is feasible and achievable for patients, carers and potential patients sharing the demographic characteristics of our study population to collaborate in a multi-centre trial at the level which suited their health, location, skills and expertise. A standard model of involvement can be tailored by adopting a flexible approach to take account of the context and complexities of a multi-site trial. Current Controlled Trials ISRCTN60481756. Registered: 13 March 2009.

Petroleum Refinery Jobs and Economic Development Impact (JEDI) Model User Reference Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldberg, Marshall

The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are user-friendly tools utilized to estimate the economic impacts at the local level of constructing and operating fuel and power generation projects for a range of conventional and renewable energy technologies. The JEDI Petroleum Refinery Model User Reference Guide was developed to assist users in employing and understanding the model. This guide provides information on the model's underlying methodology, as well as the parameters and references used to develop the cost data utilized in the model. This guide also provides basic instruction on modelmore » add-in features, operation of the model, and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the model estimates job creation, earning and output (total economic activity) for a given petroleum refinery. This includes the direct, indirect and induced economic impacts to the local economy associated with the refinery's construction and operation phases. Project cost and job data used in the model are derived from the most current cost estimations available. Local direct and indirect economic impacts are estimated using economic multipliers derived from IMPLAN software. By determining the regional economic impacts and job creation for a proposed refinery, the JEDI Petroleum Refinery model can be used to field questions about the added value refineries may bring to the local community.« less

You are lost without a map: Navigating the sea of protein structures.

PubMed

Lamb, Audrey L; Kappock, T Joseph; Silvaggi, Nicholas R

2015-04-01

X-ray crystal structures propel biochemistry research like no other experimental method, since they answer many questions directly and inspire new hypotheses. Unfortunately, many users of crystallographic models mistake them for actual experimental data. Crystallographic models are interpretations, several steps removed from the experimental measurements, making it difficult for nonspecialists to assess the quality of the underlying data. Crystallographers mainly rely on "global" measures of data and model quality to build models. Robust validation procedures based on global measures now largely ensure that structures in the Protein Data Bank (PDB) are largely correct. However, global measures do not allow users of crystallographic models to judge the reliability of "local" features in a region of interest. Refinement of a model to fit into an electron density map requires interpretation of the data to produce a single "best" overall model. This process requires inclusion of most probable conformations in areas of poor density. Users who misunderstand this can be misled, especially in regions of the structure that are mobile, including active sites, surface residues, and especially ligands. This article aims to equip users of macromolecular models with tools to critically assess local model quality. Structure users should always check the agreement of the electron density map and the derived model in all areas of interest, even if the global statistics are good. We provide illustrated examples of interpreted electron density as a guide for those unaccustomed to viewing electron density. Copyright © 2014 Elsevier B.V. All rights reserved.

Quora.com: Another Place for Users to Ask Questions

ERIC Educational Resources Information Center

Ovadia, Steven

2011-01-01

Quora (www.quora.com) is a contemporary, web-based take on reference. Users post questions within Quora and other users answer the questions. Users can vote for and against answers (or not vote at all). It is users asking questions of friends and strangers and then sorting through the results. If the model sounds familiar, it's because it is.…

PyMC: Bayesian Stochastic Modelling in Python

PubMed Central

Patil, Anand; Huard, David; Fonnesbeck, Christopher J.

2010-01-01

This user guide describes a Python package, PyMC, that allows users to efficiently code a probabilistic model and draw samples from its posterior distribution using Markov chain Monte Carlo techniques. PMID:21603108

ANNIE - INTERACTIVE PROCESSING OF DATA BASES FOR HYDROLOGIC MODELS.

USGS Publications Warehouse

Lumb, Alan M.; Kittle, John L.

1985-01-01

ANNIE is a data storage and retrieval system that was developed to reduce the time and effort required to calibrate, verify, and apply watershed models that continuously simulate water quantity and quality. Watershed models have three categories of input: parameters to describe segments of a drainage area, linkage of the segments, and time-series data. Additional goals for ANNIE include the development of software that is easily implemented on minicomputers and some microcomputers and software that has no special requirements for interactive display terminals. Another goal is for the user interaction to be based on the experience of the user so that ANNIE is helpful to the inexperienced user and yet efficient and brief for the experienced user. Finally, the code should be designed so that additional hydrologic models can easily be added to ANNIE.

System Engineering Concept Demonstration, Effort Summary. Volume 1

DTIC Science & Technology

1992-12-01

involve only the system software, user frameworks and user tools. U •User Tool....s , Catalyst oExternal 00 Computer Framwork P OSystems • •~ Sysytem...analysis, synthesis, optimization, conceptual design of Catalyst. The paper discusses the definition, design, test, and evaluation; operational concept...This approach will allow system engineering The conceptual requirements for the Process Model practitioners to recognize and tailor the model. This

Pilot-Vehicle Interface

DTIC Science & Technology

1993-11-01

way is to develop a crude but working model of an entire system. The other is by developing a realistic model of the user interface , leaving out most...devices or by incorporating software for a more user -friendly interface . Automation introduces the possibility of making data entry errors. Multimode...across various human- computer interfaces . 127 a Memory: Minimize the amount of information that the user must maintain in short-term memory

Modeling the User for Education, Training, and Performance Aiding

DTIC Science & Technology

2003-11-01

Eds.) Technology applications in education : A learning view (pp. 79–99). Hillsdale, NJ: Lawrence Erlbaum Associates. Fletcher, J.D. and Johnston, R...2003 symposium on Advanced Technologies for Military Training. v CONTENTS MODELING THE USER FOR EDUCATION , TRAINING, AND PERFORMANCE AIDING EXECUTIVE...using computer technology for education , training, decision-making, and performance aiding. Our focus is on the digital representation of these users

Modeling error in assessment of mammographic image features for improved computer-aided mammography training: initial experience

NASA Astrophysics Data System (ADS)

Mazurowski, Maciej A.; Tourassi, Georgia D.

2011-03-01

In this study we investigate the hypothesis that there exist patterns in erroneous assessment of BI-RADS image features among radiology trainees when performing diagnostic interpretation of mammograms. We also investigate whether these error making patterns can be captured by individual user models. To test our hypothesis we propose a user modeling algorithm that uses the previous readings of a trainee to identify whether certain BI-RADS feature values (e.g. "spiculated" value for "margin" feature) are associated with higher than usual likelihood that the feature will be assessed incorrectly. In our experiments we used readings of 3 radiology residents and 7 breast imaging experts for 33 breast masses for the following BI-RADS features: parenchyma density, mass margin, mass shape and mass density. The expert readings were considered as the gold standard. Rule-based individual user models were developed and tested using the leave one-one-out crossvalidation scheme. Our experimental evaluation showed that the individual user models are accurate in identifying cases for which errors are more likely to be made. The user models captured regularities in error making for all 3 residents. This finding supports our hypothesis about existence of individual error making patterns in assessment of mammographic image features using the BI-RADS lexicon. Explicit user models identifying the weaknesses of each resident could be of great use when developing and adapting a personalized training plan to meet the resident's individual needs. Such approach fits well with the framework of adaptive computer-aided educational systems in mammography we have proposed before.

46 CFR 160.176-21 - User manuals.

Code of Federal Regulations, 2010 CFR

2010-10-01

... 46 Shipping 6 2010-10-01 2010-10-01 false User manuals. 160.176-21 Section 160.176-21 Shipping...: SPECIFICATIONS AND APPROVAL LIFESAVING EQUIPMENT Inflatable Lifejackets § 160.176-21 User manuals. (a) The manufacturer must develop a user's manual for each model of inflatable lifejacket. The content of the manual...

User satisfaction with primary health care by region in Brazil: 1st cycle of external evaluation from PMAQ-AB.

PubMed

Protasio, Ane Polline Lacerda; Gomes, Luciano Bezerra; Machado, Liliane Dos Santos; Valença, Ana Maria Gondim

2017-06-01

The National Program for Access and Quality Improvement in Primary Care (Programa Nacional de Melhoria do Acesso e da Qualidade da Atenção Básica, PMAQ-AB) aimed to improve healthcare public service quality and satisfaction of health service users. This study's objective was to identify the main factors influencing user satisfaction with primary care (PC) services by region in Brazil. Using secondary data from the 1st Cycle of PMAQ-AB, logistic regression models were developed by region, with user satisfaction as the dependent variable, as defined by cluster analysis. Based on the obtained models, the health unit's ability to solve users' problems and feeling respected by the health providers were the most important factors for user satisfaction in all regions in Brazil. However, other important factors by region included the following: the health unit's hours of operation meeting the user's needs (Northeast); providers asking about family members (North); providers asking about other health needs (Midwest); users being seen without an appointment (South); and users asking questions after the appointment (Southeast). In conclusion, the factors influencing user satisfaction with PC vary according to region and are mainly associated with access quality, meeting users' needs, and work process organization.

Enhancing collaborative filtering by user interest expansion via personalized ranking.

PubMed

Liu, Qi; Chen, Enhong; Xiong, Hui; Ding, Chris H Q; Chen, Jian

2012-02-01

Recommender systems suggest a few items from many possible choices to the users by understanding their past behaviors. In these systems, the user behaviors are influenced by the hidden interests of the users. Learning to leverage the information about user interests is often critical for making better recommendations. However, existing collaborative-filtering-based recommender systems are usually focused on exploiting the information about the user's interaction with the systems; the information about latent user interests is largely underexplored. To that end, inspired by the topic models, in this paper, we propose a novel collaborative-filtering-based recommender system by user interest expansion via personalized ranking, named iExpand. The goal is to build an item-oriented model-based collaborative-filtering framework. The iExpand method introduces a three-layer, user-interests-item, representation scheme, which leads to more accurate ranking recommendation results with less computation cost and helps the understanding of the interactions among users, items, and user interests. Moreover, iExpand strategically deals with many issues that exist in traditional collaborative-filtering approaches, such as the overspecialization problem and the cold-start problem. Finally, we evaluate iExpand on three benchmark data sets, and experimental results show that iExpand can lead to better ranking performance than state-of-the-art methods with a significant margin.

Evaluating Model-Driven Development for large-scale EHRs through the openEHR approach.

PubMed

Christensen, Bente; Ellingsen, Gunnar

2016-05-01

In healthcare, the openEHR standard is a promising Model-Driven Development (MDD) approach for electronic healthcare records. This paper aims to identify key socio-technical challenges when the openEHR approach is put to use in Norwegian hospitals. More specifically, key fundamental assumptions are investigated empirically. These assumptions promise a clear separation of technical and domain concerns, users being in control of the modelling process, and widespread user commitment. Finally, these assumptions promise an easy way to model and map complex organizations. This longitudinal case study is based on an interpretive approach, whereby data were gathered through 440h of participant observation, 22 semi-structured interviews and extensive document studies over 4 years. The separation of clinical and technical concerns seemed to be aspirational, because both designing the technical system and modelling the domain required technical and clinical competence. Hence developers and clinicians found themselves working together in both arenas. User control and user commitment seemed not to apply in large-scale projects, as modelling the domain turned out to be too complicated and hence to appeal only to especially interested users worldwide, not the local end-users. Modelling proved to be a complex standardization process that shaped both the actual modelling and healthcare practice itself. A broad assemblage of contributors seems to be needed for developing an archetype-based system, in which roles, responsibilities and contributions cannot be clearly defined and delimited. The way MDD occurs has implications for medical practice per se in the form of the need to standardize practices to ensure that medical concepts are uniform across practices. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Modeling of Causes of Sina Weibo Continuance Intention with Mediation of Gender Effects

PubMed Central

Wang, Lingyu; Zhao, Wenguo; Sun, Xianghong; Zheng, Rui; Qu, Weina

2016-01-01

Sina Weibo is a Twitter-like social networking site and one of the most popular microblogging services in China. This study aims to examine the factors that influence the intentions of users to continue using this site. This paper synthesizes the expectation confirmation model, constructs of habit and perceived critical mass, and the gender effect to construct a theoretical model to explain and predict these user intentions. The model is then tested via an online survey of 498 Sina Weibo users and partial least squares (PLS) modeling. The results indicate that the continuance intention of users is directly predicted by their perceived usefulness of the service (β = 0.299), their satisfaction (β = 0.208), and their habits (β = 0.389), which jointly explain 65.9% of the variance in intention. In addition to the effects of these predictors on the continuance intentions of Sina Weibo users, an assessment of the moderating effect of gender suggests that habit plays a more important role for females than for males in continuance intention, but perceived usefulness seems to be more important for males than for females. The implications of these findings are then discussed. PMID:27199850

Modeling of Causes of Sina Weibo Continuance Intention with Mediation of Gender Effects.

PubMed

Wang, Lingyu; Zhao, Wenguo; Sun, Xianghong; Zheng, Rui; Qu, Weina

2016-01-01

Sina Weibo is a Twitter-like social networking site and one of the most popular microblogging services in China. This study aims to examine the factors that influence the intentions of users to continue using this site. This paper synthesizes the expectation confirmation model, constructs of habit and perceived critical mass, and the gender effect to construct a theoretical model to explain and predict these user intentions. The model is then tested via an online survey of 498 Sina Weibo users and partial least squares (PLS) modeling. The results indicate that the continuance intention of users is directly predicted by their perceived usefulness of the service (β = 0.299), their satisfaction (β = 0.208), and their habits (β = 0.389), which jointly explain 65.9% of the variance in intention. In addition to the effects of these predictors on the continuance intentions of Sina Weibo users, an assessment of the moderating effect of gender suggests that habit plays a more important role for females than for males in continuance intention, but perceived usefulness seems to be more important for males than for females. The implications of these findings are then discussed.

Dynamic characteristics of tweeting and tweet topics

NASA Astrophysics Data System (ADS)

Kwon, Hyun Woong; Choi, M. Y.; Kim, Ho Sung; Lee, Keumsook

2012-02-01

Twitter, having more than 200 million world users and more than 4 million Korean users, is still growing fast. Because Twitter users can `tweet' about any topic within the 140-character limit, and other users who follow the users and see the tweets can `retweet' them, Twitter is regarded as a new medium of transferring and sharing information. Nevertheless, the propensities of Twitter users to tweet or to retweet still remain unclear. In order to investigate these propensities, we propose a simple model for the dynamics of the total number of tweets about specific topics. We then observe that the topics can be categorized into three kinds according to predictability and sustainability: predictable events, unpredictable events, and sustainable events. Comparing model results with real data, we infer the tweet propensities motivated by external causes as well as retweet propensities.

The PANTHER User Experience

DOE Office of Scientific and Technical Information (OSTI.GOV)

Coram, Jamie L.; Morrow, James D.; Perkins, David Nikolaus

2015-09-01

This document describes the PANTHER R&D Application, a proof-of-concept user interface application developed under the PANTHER Grand Challenge LDRD. The purpose of the application is to explore interaction models for graph analytics, drive algorithmic improvements from an end-user point of view, and support demonstration of PANTHER technologies to potential customers. The R&D Application implements a graph-centric interaction model that exposes analysts to the algorithms contained within the GeoGraphy graph analytics library. Users define geospatial-temporal semantic graph queries by constructing search templates based on nodes, edges, and the constraints among them. Users then analyze the results of the queries using bothmore » geo-spatial and temporal visualizations. Development of this application has made user experience an explicit driver for project and algorithmic level decisions that will affect how analysts one day make use of PANTHER technologies.« less

Simulation Platform: a cloud-based online simulation environment.

PubMed

Yamazaki, Tadashi; Ikeno, Hidetoshi; Okumura, Yoshihiro; Satoh, Shunji; Kamiyama, Yoshimi; Hirata, Yutaka; Inagaki, Keiichiro; Ishihara, Akito; Kannon, Takayuki; Usui, Shiro

2011-09-01

For multi-scale and multi-modal neural modeling, it is needed to handle multiple neural models described at different levels seamlessly. Database technology will become more important for these studies, specifically for downloading and handling the neural models seamlessly and effortlessly. To date, conventional neuroinformatics databases have solely been designed to archive model files, but the databases should provide a chance for users to validate the models before downloading them. In this paper, we report our on-going project to develop a cloud-based web service for online simulation called "Simulation Platform". Simulation Platform is a cloud of virtual machines running GNU/Linux. On a virtual machine, various software including developer tools such as compilers and libraries, popular neural simulators such as GENESIS, NEURON and NEST, and scientific software such as Gnuplot, R and Octave, are pre-installed. When a user posts a request, a virtual machine is assigned to the user, and the simulation starts on that machine. The user remotely accesses to the machine through a web browser and carries out the simulation, without the need to install any software but a web browser on the user's own computer. Therefore, Simulation Platform is expected to eliminate impediments to handle multiple neural models that require multiple software. Copyright © 2011 Elsevier Ltd. All rights reserved.

Reprint of: Simulation Platform: a cloud-based online simulation environment.

PubMed

Yamazaki, Tadashi; Ikeno, Hidetoshi; Okumura, Yoshihiro; Satoh, Shunji; Kamiyama, Yoshimi; Hirata, Yutaka; Inagaki, Keiichiro; Ishihara, Akito; Kannon, Takayuki; Usui, Shiro

2011-11-01

For multi-scale and multi-modal neural modeling, it is needed to handle multiple neural models described at different levels seamlessly. Database technology will become more important for these studies, specifically for downloading and handling the neural models seamlessly and effortlessly. To date, conventional neuroinformatics databases have solely been designed to archive model files, but the databases should provide a chance for users to validate the models before downloading them. In this paper, we report our on-going project to develop a cloud-based web service for online simulation called "Simulation Platform". Simulation Platform is a cloud of virtual machines running GNU/Linux. On a virtual machine, various software including developer tools such as compilers and libraries, popular neural simulators such as GENESIS, NEURON and NEST, and scientific software such as Gnuplot, R and Octave, are pre-installed. When a user posts a request, a virtual machine is assigned to the user, and the simulation starts on that machine. The user remotely accesses to the machine through a web browser and carries out the simulation, without the need to install any software but a web browser on the user's own computer. Therefore, Simulation Platform is expected to eliminate impediments to handle multiple neural models that require multiple software. Copyright © 2011 Elsevier Ltd. All rights reserved.

Online chemical modeling environment (OCHEM): web platform for data storage, model development and publishing of chemical information

NASA Astrophysics Data System (ADS)

Sushko, Iurii; Novotarskyi, Sergii; Körner, Robert; Pandey, Anil Kumar; Rupp, Matthias; Teetz, Wolfram; Brandmaier, Stefan; Abdelaziz, Ahmed; Prokopenko, Volodymyr V.; Tanchuk, Vsevolod Y.; Todeschini, Roberto; Varnek, Alexandre; Marcou, Gilles; Ertl, Peter; Potemkin, Vladimir; Grishina, Maria; Gasteiger, Johann; Schwab, Christof; Baskin, Igor I.; Palyulin, Vladimir A.; Radchenko, Eugene V.; Welsh, William J.; Kholodovych, Vladyslav; Chekmarev, Dmitriy; Cherkasov, Artem; Aires-de-Sousa, Joao; Zhang, Qing-You; Bender, Andreas; Nigsch, Florian; Patiny, Luc; Williams, Antony; Tkachenko, Valery; Tetko, Igor V.

2011-06-01

The Online Chemical Modeling Environment is a web-based platform that aims to automate and simplify the typical steps required for QSAR modeling. The platform consists of two major subsystems: the database of experimental measurements and the modeling framework. A user-contributed database contains a set of tools for easy input, search and modification of thousands of records. The OCHEM database is based on the wiki principle and focuses primarily on the quality and verifiability of the data. The database is tightly integrated with the modeling framework, which supports all the steps required to create a predictive model: data search, calculation and selection of a vast variety of molecular descriptors, application of machine learning methods, validation, analysis of the model and assessment of the applicability domain. As compared to other similar systems, OCHEM is not intended to re-implement the existing tools or models but rather to invite the original authors to contribute their results, make them publicly available, share them with other users and to become members of the growing research community. Our intention is to make OCHEM a widely used platform to perform the QSPR/QSAR studies online and share it with other users on the Web. The ultimate goal of OCHEM is collecting all possible chemoinformatics tools within one simple, reliable and user-friendly resource. The OCHEM is free for web users and it is available online at http://www.ochem.eu.

Combining Unsupervised and Supervised Classification to Build User Models for Exploratory Learning Environments

ERIC Educational Resources Information Center

Amershi, Saleema; Conati, Cristina

2009-01-01

In this paper, we present a data-based user modeling framework that uses both unsupervised and supervised classification to build student models for exploratory learning environments. We apply the framework to build student models for two different learning environments and using two different data sources (logged interface and eye-tracking data).…

A Model for Flexibly Editing CSCL Scripts

ERIC Educational Resources Information Center

Sobreira, Pericles; Tchounikine, Pierre

2012-01-01

This article presents a model whose primary concern and design rationale is to offer users (teachers) with basic ICT skills an intuitive, easy, and flexible way of editing scripts. The proposal is based on relating an end-user representation as a table and a machine model as a tree. The table-tree model introduces structural expressiveness and…

A shared-world conceptual model for integrating space station life sciences telescience operations

NASA Technical Reports Server (NTRS)

Johnson, Vicki; Bosley, John

1988-01-01

Mental models of the Space Station and its ancillary facilities will be employed by users of the Space Station as they draw upon past experiences, perform tasks, and collectively plan for future activities. The operational environment of the Space Station will incorporate telescience, a new set of operational modes. To investigate properties of the operational environment, distributed users, and the mental models they employ to manipulate resources while conducting telescience, an integrating shared-world conceptual model of Space Station telescience is proposed. The model comprises distributed users and resources (active elements); agents who mediate interactions among these elements on the basis of intelligent processing of shared information; and telescience protocols which structure the interactions of agents as they engage in cooperative, responsive interactions on behalf of users and resources distributed in space and time. Examples from the life sciences are used to instantiate and refine the model's principles. Implications for transaction management and autonomy are discussed. Experiments employing the model are described which the authors intend to conduct using the Space Station Life Sciences Telescience Testbed currently under development at Ames Research Center.

Participatory interaction design in user requirements specification in healthcare.

PubMed

Martikainen, Susanna; Ikävalko, Pauliina; Korpela, Mikko

2010-01-01

Healthcare information systems are accused of poor usability even in the popular media in Finland. Doctors especially have been very critical and actively expressed their opinions in public. User involvement and user-centered design methods are seen as the key solution to usability problems. In this paper we describe a research case where participatory methods were experimented within healthcare information systems development in medicinal care in a hospital. The study was part of a larger research project on Activity-driven Information Systems Development in healthcare. The study started by finding out about and modeling the present state of medicinal care in the hospital. After that it was important to define and model the goal state. The goal state, facilitated by the would-be software package, was modeled with the help of user interface drawings as one way of prototyping. Traditional usability methods were extended during the study. According to the health professionals' feedback, the use of participatory and user-centered interaction design methods, particularly user interface drawings enabled them to describe their requirements and create common understanding with the system developers.

A Generalizable Methodology for Quantifying User Satisfaction

NASA Astrophysics Data System (ADS)

Huang, Te-Yuan; Chen, Kuan-Ta; Huang, Polly; Lei, Chin-Laung

Quantifying user satisfaction is essential, because the results can help service providers deliver better services. In this work, we propose a generalizable methodology, based on survival analysis, to quantify user satisfaction in terms of session times, i. e., the length of time users stay with an application. Unlike subjective human surveys, our methodology is based solely on passive measurement, which is more cost-efficient and better able to capture subconscious reactions. Furthermore, by using session times, rather than a specific performance indicator, such as the level of distortion of voice signals, the effects of other factors like loudness and sidetone, can also be captured by the developed models. Like survival analysis, our methodology is characterized by low complexity and a simple model-developing process. The feasibility of our methodology is demonstrated through case studies of ShenZhou Online, a commercial MMORPG in Taiwan, and the most prevalent VoIP application in the world, namely Skype. Through the model development process, we can also identify the most significant performance factors and their impacts on user satisfaction and discuss how they can be exploited to improve user experience and optimize resource allocation.

Required spatial resolution of hydrological models to evaluate urban flood resilience measures

NASA Astrophysics Data System (ADS)

Gires, A.; Giangola-Murzyn, A.; Tchiguirinskaia, I.; Schertzer, D.; Lovejoy, S.

2012-04-01

During a flood in urban area, several non-linear processes (rainfall, surface runoff, sewer flow, and sub-surface flow) interact. Fully distributed hydrological models are a useful tool to better understand these complex interactions between natural processes and man built environment. Developing an efficient model is a first step to improve the understanding of flood resilience in urban area. Given that the previously mentioned underlying physical phenomenon exhibit different relevant scales, determining the required spatial resolution of such model is tricky but necessary issue. For instance such model should be able to properly represent large scale effects of local scale flood resilience measures such as stop logs. The model should also be as simple as possible without being simplistic. In this paper we test two types of model. First we use an operational semi-distributed model over a 3400 ha peri-urban area located in Seine-Saint-Denis (North-East of Paris). In this model, the area is divided into sub-catchments of average size 17 ha that are considered as homogenous, and only the sewer discharge is modelled. The rainfall data, whose resolution is 1 km is space and 5 min in time, comes from the C-band radar of Trappes, located in the West of Paris, and operated by Météo-France. It was shown that the spatial resolution of both the model and the rainfall field did not enable to fully grasp the small scale rainfall variability. To achieve this, first an ensemble of realistic rainfall fields downscaled to a resolution of 100 m is generated with the help of multifractal space-time cascades whose characteristic exponents are estimated on the available radar data. Second the corresponding ensemble of sewer hydrographs is simulated by inputting each rainfall realization to the model. It appears that the probability distribution of the simulated peak flow exhibits a power-law behaviour. This indicates that there is a great uncertainty associated with small scale rainfall. Second we focus on a 50 ha catchment of this area and implement Multi-Hydro, a fully distributed urban hydrological model currently being developed at Ecole des Ponts ParisTech (El Tabach et al., 2009). The version used in this paper consists in an interactive coupling between a 2D model representing infiltration and surface runoff (TREX, Two dimensional Runoff, Erosion and eXport model, Velleux et al., 2011) and a 1D model of sewer networks (SWMM, Storm Water Management Model, Rossman, 2007). Spatial resolution ranging from 2 m to 50 m for land use, topography and rainfall are tested. A special highlight on the impact of small scales rainfall is done. To achieve this the previously mentioned methodology is implemented with rainfall fields downscaled to 10 m in space and 20 s in time. Finally, we will discuss the gains generated by the implementation of the fully distributed model.

The Virtual Geophysics Laboratory (VGL): Scientific Workflows Operating Across Organizations and Across Infrastructures

NASA Astrophysics Data System (ADS)

Cox, S. J.; Wyborn, L. A.; Fraser, R.; Rankine, T.; Woodcock, R.; Vote, J.; Evans, B.

2012-12-01

The Virtual Geophysics Laboratory (VGL) is web portal that provides geoscientists with an integrated online environment that: seamlessly accesses geophysical and geoscience data services from the AuScope national geoscience information infrastructure; loosely couples these data to a variety of gesocience software tools; and provides large scale processing facilities via cloud computing. VGL is a collaboration between CSIRO, Geoscience Australia, National Computational Infrastructure, Monash University, Australian National University and the University of Queensland. The VGL provides a distributed system whereby a user can enter an online virtual laboratory to seamlessly connect to OGC web services for geoscience data. The data is supplied in open standards formats using international standards like GeoSciML. A VGL user uses a web mapping interface to discover and filter the data sources using spatial and attribute filters to define a subset. Once the data is selected the user is not required to download the data. VGL collates the service query information for later in the processing workflow where it will be staged directly to the computing facilities. The combination of deferring data download and access to Cloud computing enables VGL users to access their data at higher resolutions and to undertake larger scale inversions, more complex models and simulations than their own local computing facilities might allow. Inside the Virtual Geophysics Laboratory, the user has access to a library of existing models, complete with exemplar workflows for specific scientific problems based on those models. For example, the user can load a geological model published by Geoscience Australia, apply a basic deformation workflow provided by a CSIRO scientist, and have it run in a scientific code from Monash. Finally the user can publish these results to share with a colleague or cite in a paper. This opens new opportunities for access and collaboration as all the resources (models, code, data, processing) are shared in the one virtual laboratory. VGL provides end users with access to an intuitive, user-centered interface that leverages cloud storage and cloud and cluster processing from both the research communities and commercial suppliers (e.g. Amazon). As the underlying data and information services are agnostic of the scientific domain, they can support many other data types. This fundamental characteristic results in a highly reusable virtual laboratory infrastructure that could also be used for example natural hazards, satellite processing, soil geochemistry, climate modeling, agriculture crop modeling.

Interactive Inverse Groundwater Modeling - Addressing User Fatigue

NASA Astrophysics Data System (ADS)

Singh, A.; Minsker, B. S.

2006-12-01

This paper builds on ongoing research on developing an interactive and multi-objective framework to solve the groundwater inverse problem. In this work we solve the classic groundwater inverse problem of estimating a spatially continuous conductivity field, given field measurements of hydraulic heads. The proposed framework is based on an interactive multi-objective genetic algorithm (IMOGA) that not only considers quantitative measures such as calibration error and degree of regularization, but also takes into account expert knowledge about the structure of the underlying conductivity field expressed as subjective rankings of potential conductivity fields by the expert. The IMOGA converges to the optimal Pareto front representing the best trade- off among the qualitative as well as quantitative objectives. However, since the IMOGA is a population-based iterative search it requires the user to evaluate hundreds of solutions. This leads to the problem of 'user fatigue'. We propose a two step methodology to combat user fatigue in such interactive systems. The first step is choosing only a few highly representative solutions to be shown to the expert for ranking. Spatial clustering is used to group the search space based on the similarity of the conductivity fields. Sampling is then carried out from different clusters to improve the diversity of solutions shown to the user. Once the expert has ranked representative solutions from each cluster a machine learning model is used to 'learn user preference' and extrapolate these for the solutions not ranked by the expert. We investigate different machine learning models such as Decision Trees, Bayesian learning model, and instance based weighting to model user preference. In addition, we also investigate ways to improve the performance of these models by providing information about the spatial structure of the conductivity fields (which is what the expert bases his or her rank on). Results are shown for each of these machine learning models and the advantages and disadvantages for each approach are discussed. These results indicate that using the proposed two-step methodology leads to significant reduction in user-fatigue without deteriorating the solution quality of the IMOGA.

Myokit: A simple interface to cardiac cellular electrophysiology.

PubMed

Clerx, Michael; Collins, Pieter; de Lange, Enno; Volders, Paul G A

2016-01-01

Myokit is a new powerful and versatile software tool for modeling and simulation of cardiac cellular electrophysiology. Myokit consists of an easy-to-read modeling language, a graphical user interface, single and multi-cell simulation engines and a library of advanced analysis tools accessible through a Python interface. Models can be loaded from Myokit's native file format or imported from CellML. Model export is provided to C, MATLAB, CellML, CUDA and OpenCL. Patch-clamp data can be imported and used to estimate model parameters. In this paper, we review existing tools to simulate the cardiac cellular action potential to find that current tools do not cater specifically to model development and that there is a gap between easy-to-use but limited software and powerful tools that require strong programming skills from their users. We then describe Myokit's capabilities, focusing on its model description language, simulation engines and import/export facilities in detail. Using three examples, we show how Myokit can be used for clinically relevant investigations, multi-model testing and parameter estimation in Markov models, all with minimal programming effort from the user. This way, Myokit bridges a gap between performance, versatility and user-friendliness. Copyright © 2015 Elsevier Ltd. All rights reserved.

PREDICTING ATTENUATION OF VIRUSES DURING PERCOLATION IN SOILS: 2. USER'S GUIDE TO THE VIRULO 1.0 COMPUTER MODEL

EPA Science Inventory

In the EPA document Predicting Attenuation of Viruses During Percolation in Soils 1. Probabilistic Model the conceptual, theoretical, and mathematical foundations for a predictive screening model were presented. In this current volume we present a User's Guide for the computer mo...

Measuring pedestrian volumes and conflicts. Volume IV, Pedestrian/vehicle accident prediction model : a users manual

DOT National Transportation Integrated Search

1988-03-01

Users of this manual are expected to be researchers who are attempting to develop models that can be used to predict occurrence of pedestrian accidents in a particular city. The manual presents guidelines in the development of such models. A group-...

User's instructions for the 41-node thermoregulatory model (steady state version)

NASA Technical Reports Server (NTRS)

Leonard, J. I.

1974-01-01

A user's guide for the steady-state thermoregulatory model is presented. The model was modified to provide conversational interaction on a remote terminal, greater flexibility for parameter estimation, increased efficiency of convergence, greater choice of output variable and more realistic equations for respiratory and skin diffusion water losses.

Generalized Fluid System Simulation Program (GFSSP) - Version 6

NASA Technical Reports Server (NTRS)

Majumdar, Alok; LeClair, Andre; Moore, Ric; Schallhorn, Paul

2015-01-01

The Generalized Fluid System Simulation Program (GFSSP) is a finite-volume based general-purpose computer program for analyzing steady state and time-dependent flow rates, pressures, temperatures, and concentrations in a complex flow network. The program is capable of modeling real fluids with phase changes, compressibility, mixture thermodynamics, conjugate heat transfer between solid and fluid, fluid transients, pumps, compressors, flow control valves and external body forces such as gravity and centrifugal. The thermo-fluid system to be analyzed is discretized into nodes, branches, and conductors. The scalar properties such as pressure, temperature, and concentrations are calculated at nodes. Mass flow rates and heat transfer rates are computed in branches and conductors. The graphical user interface allows users to build their models using the 'point, drag, and click' method; the users can also run their models and post-process the results in the same environment. The integrated fluid library supplies thermodynamic and thermo-physical properties of 36 fluids, and 24 different resistance/source options are provided for modeling momentum sources or sinks in the branches. Users can introduce new physics, non-linear and time-dependent boundary conditions through user-subroutine.

The AE-8 trapped electron model environment

NASA Technical Reports Server (NTRS)

Vette, James I.

1991-01-01

The machine sensible version of the AE-8 electron model environment was completed in December 1983. It has been sent to users on the model environment distribution list and is made available to new users by the National Space Science Data Center (NSSDC). AE-8 is the last in a series of terrestrial trapped radiation models that includes eight proton and eight electron versions. With the exception of AE-8, all these models were documented in formal reports as well as being available in a machine sensible form. The purpose of this report is to complete the documentation, finally, for AE-8 so that users can understand its construction and see the comparison of the model with the new data used, as well as with the AE-4 model.

A methodology for the design and evaluation of user interfaces for interactive information systems. Ph.D. Thesis Final Report, 1 Jul. 1985 - 31 Dec. 1987

NASA Technical Reports Server (NTRS)

Dominick, Wayne D. (Editor); Farooq, Mohammad U.

1986-01-01

The definition of proposed research addressing the development and validation of a methodology for the design and evaluation of user interfaces for interactive information systems is given. The major objectives of this research are: the development of a comprehensive, objective, and generalizable methodology for the design and evaluation of user interfaces for information systems; the development of equations and/or analytical models to characterize user behavior and the performance of a designed interface; the design of a prototype system for the development and administration of user interfaces; and the design and use of controlled experiments to support the research and test/validate the proposed methodology. The proposed design methodology views the user interface as a virtual machine composed of three layers: an interactive layer, a dialogue manager layer, and an application interface layer. A command language model of user system interactions is presented because of its inherent simplicity and structured approach based on interaction events. All interaction events have a common structure based on common generic elements necessary for a successful dialogue. It is shown that, using this model, various types of interfaces could be designed and implemented to accommodate various categories of users. The implementation methodology is discussed in terms of how to store and organize the information.

Do recommender systems benefit users? a modeling approach

NASA Astrophysics Data System (ADS)

Yeung, Chi Ho

2016-04-01

Recommender systems are present in many web applications to guide purchase choices. They increase sales and benefit sellers, but whether they benefit customers by providing relevant products remains less explored. While in many cases the recommended products are relevant to users, in other cases customers may be tempted to purchase the products only because they are recommended. Here we introduce a model to examine the benefit of recommender systems for users, and find that recommendations from the system can be equivalent to random draws if one always follows the recommendations and seldom purchases according to his or her own preference. Nevertheless, with sufficient information about user preferences, recommendations become accurate and an abrupt transition to this accurate regime is observed for some of the studied algorithms. On the other hand, we find that high estimated accuracy indicated by common accuracy metrics is not necessarily equivalent to high real accuracy in matching users with products. This disagreement between estimated and real accuracy serves as an alarm for operators and researchers who evaluate recommender systems merely with accuracy metrics. We tested our model with a real dataset and observed similar behaviors. Finally, a recommendation approach with improved accuracy is suggested. These results imply that recommender systems can benefit users, but the more frequently a user purchases the recommended products, the less relevant the recommended products are in matching user taste.

Progressively consolidating historical visual explorations for new discoveries

NASA Astrophysics Data System (ADS)

Zhao, Kaiyu; Ward, Matthew O.; Rundensteiner, Elke A.; Higgins, Huong N.

2013-12-01

A significant task within data mining is to identify data models of interest. While facilitating the exploration tasks, most visualization systems do not make use of all the data models that are generated during the exploration. In this paper, we introduce a system that allows the user to gain insights from the data space progressively by forming data models and consolidating the generated models on the fly. Each model can be a a computationally extracted or user-defined subset that contains a certain degree of interest and might lead to some discoveries. When the user generates more and more data models, the degree of interest of some portion of some models will either grow (indicating higher occurrence) or will fluctuate or decrease (corresponding to lower occurrence). Our system maintains a collection of such models and accumulates the interestingness of each model into a consolidated model. In order to consolidate the models, the system summarizes the associations between the models in the collection and identifies support (models reinforce each other), complementary (models complement each other), and overlap of the models. The accumulated interestingness keeps track of historical exploration and helps the user summarize their findings which can lead to new discoveries. This mechanism for integrating results from multiple models can be applied to a wide range of decision support systems. We demonstrate our system in a case study involving the financial status of US companies.

Modeling users, context and devices for ambient assisted living environments.

PubMed

Castillejo, Eduardo; Almeida, Aitor; López-de-Ipiña, Diego; Chen, Liming

2014-03-17

The participation of users within AAL environments is increasing thanks to the capabilities of the current wearable devices. Furthermore, the significance of considering user's preferences, context conditions and device's capabilities help smart environments to personalize services and resources for them. Being aware of different characteristics of the entities participating in these situations is vital for reaching the main goals of the corresponding systems efficiently. To collect different information from these entities, it is necessary to design several formal models which help designers to organize and give some meaning to the gathered data. In this paper, we analyze several literature solutions for modeling users, context and devices considering different approaches in the Ambient Assisted Living domain. Besides, we remark different ongoing standardization works in this area. We also discuss the used techniques, modeled characteristics and the advantages and drawbacks of each approach to finally draw several conclusions about the reviewed works.

Modeling Users, Context and Devices for Ambient Assisted Living Environments

PubMed Central

Castillejo, Eduardo; Almeida, Aitor; López-de-Ipiña, Diego; Chen, Liming

2014-01-01

The participation of users within AAL environments is increasing thanks to the capabilities of the current wearable devices. Furthermore, the significance of considering user's preferences, context conditions and device's capabilities help smart environments to personalize services and resources for them. Being aware of different characteristics of the entities participating in these situations is vital for reaching the main goals of the corresponding systems efficiently. To collect different information from these entities, it is necessary to design several formal models which help designers to organize and give some meaning to the gathered data. In this paper, we analyze several literature solutions for modeling users, context and devices considering different approaches in the Ambient Assisted Living domain. Besides, we remark different ongoing standardization works in this area. We also discuss the used techniques, modeled characteristics and the advantages and drawbacks of each approach to finally draw several conclusions about the reviewed works. PMID:24643006

A quasi-current representation for information needs inspired by Two-State Vector Formalism

NASA Astrophysics Data System (ADS)

Wang, Panpan; Hou, Yuexian; Li, Jingfei; Zhang, Yazhou; Song, Dawei; Li, Wenjie

2017-09-01

Recently, a number of quantum theory (QT)-based information retrieval (IR) models have been proposed for modeling session search task that users issue queries continuously in order to describe their evolving information needs (IN). However, the standard formalism of QT cannot provide a complete description for users' current IN in a sense that it does not take the 'future' information into consideration. Therefore, to seek a more proper and complete representation for users' IN, we construct a representation of quasi-current IN inspired by an emerging Two-State Vector Formalism (TSVF). With the enlightenment of the completeness of TSVF, a "two-state vector" derived from the 'future' (the current query) and the 'history' (the previous query) is employed to describe users' quasi-current IN in a more complete way. Extensive experiments are conducted on the session tracks of TREC 2013 & 2014, and show that our model outperforms a series of compared IR models.

Browsing Space Weather Data and Models with the Integrated Space Weather Analysis (iSWA) System

NASA Technical Reports Server (NTRS)

Maddox, Marlo M.; Mullinix, Richard E.; Berrios, David H.; Hesse, Michael; Rastaetter, Lutz; Pulkkinen, Antti; Hourcle, Joseph A.; Thompson, Barbara J.

2011-01-01

The Integrated Space Weather Analysis (iSWA) System is a comprehensive web-based platform for space weather information that combines data from solar, heliospheric and geospace observatories with forecasts based on the most advanced space weather models. The iSWA system collects, generates, and presents a wide array of space weather resources in an intuitive, user-configurable, and adaptable format - thus enabling users to respond to current and future space weather impacts as well as enabling post-impact analysis. iSWA currently provides over 200 data and modeling products, and features a variety of tools that allow the user to browse, combine, and examine data and models from various sources. This presentation will consist of a summary of the iSWA products and an overview of the customizable user interfaces, and will feature several tutorial demonstrations highlighting the interactive tools and advanced capabilities.

Developing Access Control Model of Web OLAP over Trusted and Collaborative Data Warehouses

NASA Astrophysics Data System (ADS)

Fugkeaw, Somchart; Mitrpanont, Jarernsri L.; Manpanpanich, Piyawit; Juntapremjitt, Sekpon

This paper proposes the design and development of Role- based Access Control (RBAC) model for the Single Sign-On (SSO) Web-OLAP query spanning over multiple data warehouses (DWs). The model is based on PKI Authentication and Privilege Management Infrastructure (PMI); it presents a binding model of RBAC authorization based on dimension privilege specified in attribute certificate (AC) and user identification. Particularly, the way of attribute mapping between DW user authentication and privilege of dimensional access is illustrated. In our approach, we apply the multi-agent system to automate flexible and effective management of user authentication, role delegation as well as system accountability. Finally, the paper culminates in the prototype system A-COLD (Access Control of web-OLAP over multiple DWs) that incorporates the OLAP features and authentication and authorization enforcement in the multi-user and multi-data warehouse environment.

Software systems for modeling articulated figures

NASA Technical Reports Server (NTRS)

Phillips, Cary B.

1989-01-01

Research in computer animation and simulation of human task performance requires sophisticated geometric modeling and user interface tools. The software for a research environment should present the programmer with a powerful but flexible substrate of facilities for displaying and manipulating geometric objects, yet insure that future tools have a consistent and friendly user interface. Jack is a system which provides a flexible and extensible programmer and user interface for displaying and manipulating complex geometric figures, particularly human figures in a 3D working environment. It is a basic software framework for high-performance Silicon Graphics IRIS workstations for modeling and manipulating geometric objects in a general but powerful way. It provides a consistent and user-friendly interface across various applications in computer animation and simulation of human task performance. Currently, Jack provides input and control for applications including lighting specification and image rendering, anthropometric modeling, figure positioning, inverse kinematics, dynamic simulation, and keyframe animation.

Modelling information dissemination under privacy concerns in social media

NASA Astrophysics Data System (ADS)

Zhu, Hui; Huang, Cheng; Lu, Rongxing; Li, Hui

2016-05-01

Social media has recently become an important platform for users to share news, express views, and post messages. However, due to user privacy preservation in social media, many privacy setting tools are employed, which inevitably change the patterns and dynamics of information dissemination. In this study, a general stochastic model using dynamic evolution equations was introduced to illustrate how privacy concerns impact the process of information dissemination. Extensive simulations and analyzes involving the privacy settings of general users, privileged users, and pure observers were conducted on real-world networks, and the results demonstrated that user privacy settings affect information differently. Finally, we also studied the process of information diffusion analytically and numerically with different privacy settings using two classic networks.

ASSIST user manual

NASA Technical Reports Server (NTRS)

Johnson, Sally C.; Boerschlein, David P.

1995-01-01

Semi-Markov models can be used to analyze the reliability of virtually any fault-tolerant system. However, the process of delineating all the states and transitions in a complex system model can be devastatingly tedious and error prone. The Abstract Semi-Markov Specification Interface to the SURE Tool (ASSIST) computer program allows the user to describe the semi-Markov model in a high-level language. Instead of listing the individual model states, the user specifies the rules governing the behavior of the system, and these are used to generate the model automatically. A few statements in the abstract language can describe a very large, complex model. Because no assumptions are made about the system being modeled, ASSIST can be used to generate models describing the behavior of any system. The ASSIST program and its input language are described and illustrated by examples.

16 CFR 1203.6 - Labeling and instructions.

Code of Federal Regulations, 2010 CFR

2010-01-01

... visible to the user: (1) Model designation. (2) A warning to the user that no helmet can protect against... wearer's head in accordance with the manufacturer's fitting instructions. (4) A warning to the user that... protect the head against further impacts, and that this damage may not be visible to the user. This label...

Reading, Writing, and Documentation and Managing the Development of User Documentation.

ERIC Educational Resources Information Center

Lindberg, Wayne; Hoffman, Terrye

1987-01-01

The first of two articles addressing the issue of user documentation for computer software discusses the need to teach users how to read documentation. The second presents a guide for writing documentation that is based on the instructional systems design model, and makes suggestions for the desktop publishing of user manuals. (CLB)

Intelligent agents as a basis for natural language interfaces

DOE Office of Scientific and Technical Information (OSTI.GOV)

Chin, D.N.

1987-01-01

Typical natural-language interfaces respond passively to the users's commands and queries. They cannot volunteer information, correction user misconceptions, or reject unethical requests. In order to do these things, a system must be an intelligent agent. UC (UNIX Consultant), a natural language system that helps the user solve problems in using the UNIX operating system, is such an intelligent agent. The agent component of UC in UCEgo. UCEgo provides UC with its own goals and plans. By adopting different goals in different situations, UCEgo creates and executes different plans, enabling it to interact appropriately with the user. UCEgo adopts goals frommore » its themes, adopts subgoals during planning, and adopts metagoals for dealing with goal interactions. It also adopts goals when it notices that the user either lacks necessary knowledge, or has incorrect beliefs. In these cases, UCEgo plans to volunteer information or correct the user's misconception as appropriate. The user's knowledge and beliefs are modeled by the KNOME (KNOwledge Model of Expertise) component of UC. KNOME is a double-stereotype system which categorizes users by expertise and categorizes UNIX facts by difficulty.« less

NASA Orbital Debris Engineering Model ORDEM2008 (Beta Version)

NASA Technical Reports Server (NTRS)

Stansbery, Eugene G.; Krisko, Paula H.

2009-01-01

This is an interim document intended to accompany the beta-release of the ORDEM2008 model. As such it provides the user with a guide for its use, a list of its capabilities, a brief summary of model development, and appendices included to educate the user as to typical runtimes for different orbit configurations. More detailed documentation will be delivered with the final product. ORDEM2008 supersedes NASA's previous model - ORDEM2000. The availability of new sensor and in situ data, the re-analysis of older data, and the development of new analytical techniques, has enabled the construction of this more comprehensive and sophisticated model. Integrated with the software is an upgraded graphical user interface (GUI), which uses project-oriented organization and provides the user with graphical representations of numerous output data products. These range from the conventional average debris size vs. flux magnitude for chosen analysis orbits, to the more complex color-contoured two-dimensional (2-D) directional flux diagrams in terms of local spacecraft pitch and yaw.

User modeling techniques for enhanced usability of OPSMODEL operations simulation software

NASA Technical Reports Server (NTRS)

Davis, William T.

1991-01-01

The PC based OPSMODEL operations software for modeling and simulation of space station crew activities supports engineering and cost analyses and operations planning. Using top-down modeling, the level of detail required in the data base can be limited to being commensurate with the results required of any particular analysis. To perform a simulation, a resource environment consisting of locations, crew definition, equipment, and consumables is first defined. Activities to be simulated are then defined as operations and scheduled as desired. These operations are defined within a 1000 level priority structure. The simulation on OPSMODEL, then, consists of the following: user defined, user scheduled operations executing within an environment of user defined resource and priority constraints. Techniques for prioritizing operations to realistically model a representative daily scenario of on-orbit space station crew activities are discussed. The large number of priority levels allows priorities to be assigned commensurate with the detail necessary for a given simulation. Several techniques for realistic modeling of day-to-day work carryover are also addressed.

A Sketching Interface for Freeform 3D Modeling

NASA Astrophysics Data System (ADS)

Igarashi, Takeo

This chapter introduces Teddy, a sketch-based modeling system to quickly and easily design freeform models such as stuffed animals and other rotund objects. The user draws several 2D freeform strokes interactively on the screen and the system automatically constructs plausible 3D polygonal surfaces. Our system supports several modeling operations, including the operation to construct a 3D polygonal surface from a 2D silhouette drawn by the user: it inflates the region surrounded by the silhouette making a wide area fat, and a narrow area thin. Teddy, our prototype system, is implemented as a Java program, and the mesh construction is done in real-time on a standard PC. Our informal user study showed that a first-time user masters the operations within 10 minutes, and can construct interesting 3D models within minutes. We also report the result of a case study where a high school teacher taught various 3D concepts in geography using the system.

Understanding Deep Representations Learned in Modeling Users Likes.

PubMed

Guntuku, Sharath Chandra; Zhou, Joey Tianyi; Roy, Sujoy; Lin, Weisi; Tsang, Ivor W

2016-08-01

Automatically understanding and discriminating different users' liking for an image is a challenging problem. This is because the relationship between image features (even semantic ones extracted by existing tools, viz., faces, objects, and so on) and users' likes is non-linear, influenced by several subtle factors. This paper presents a deep bi-modal knowledge representation of images based on their visual content and associated tags (text). A mapping step between the different levels of visual and textual representations allows for the transfer of semantic knowledge between the two modalities. Feature selection is applied before learning deep representation to identify the important features for a user to like an image. The proposed representation is shown to be effective in discriminating users based on images they like and also in recommending images that a given user likes, outperforming the state-of-the-art feature representations by  ∼ 15 %-20%. Beyond this test-set performance, an attempt is made to qualitatively understand the representations learned by the deep architecture used to model user likes.

Classification of Twitter Users Who Tweet About E-Cigarettes

PubMed Central

Miano, Thomas; Chew, Robert; Eggers, Matthew; Nonnemaker, James

2017-01-01

Background Despite concerns about their health risks, e‑cigarettes have gained popularity in recent years. Concurrent with the recent increase in e‑cigarette use, social media sites such as Twitter have become a common platform for sharing information about e-cigarettes and to promote marketing of e‑cigarettes. Monitoring the trends in e‑cigarette–related social media activity requires timely assessment of the content of posts and the types of users generating the content. However, little is known about the diversity of the types of users responsible for generating e‑cigarette–related content on Twitter. Objective The aim of this study was to demonstrate a novel methodology for automatically classifying Twitter users who tweet about e‑cigarette–related topics into distinct categories. Methods We collected approximately 11.5 million e‑cigarette–related tweets posted between November 2014 and October 2016 and obtained a random sample of Twitter users who tweeted about e‑cigarettes. Trained human coders examined the handles’ profiles and manually categorized each as one of the following user types: individual (n=2168), vaper enthusiast (n=334), informed agency (n=622), marketer (n=752), and spammer (n=1021). Next, the Twitter metadata as well as a sample of tweets for each labeled user were gathered, and features that reflect users’ metadata and tweeting behavior were analyzed. Finally, multiple machine learning algorithms were tested to identify a model with the best performance in classifying user types. Results Using a classification model that included metadata and features associated with tweeting behavior, we were able to predict with relatively high accuracy five different types of Twitter users that tweet about e‑cigarettes (average F1 score=83.3%). Accuracy varied by user type, with F1 scores of individuals, informed agencies, marketers, spammers, and vaper enthusiasts being 91.1%, 84.4%, 81.2%, 79.5%, and 47.1%, respectively. Vaper enthusiasts were the most challenging user type to predict accurately and were commonly misclassified as marketers. The inclusion of additional tweet-derived features that capture tweeting behavior was found to significantly improve the model performance—an overall F1 score gain of 10.6%—beyond metadata features alone. Conclusions This study provides a method for classifying five different types of users who tweet about e‑cigarettes. Our model achieved high levels of classification performance for most groups, and examining the tweeting behavior was critical in improving the model performance. Results can help identify groups engaged in conversations about e‑cigarettes online to help inform public health surveillance, education, and regulatory efforts. PMID:28951381

The Study on Flood Reduction and Securing Instreamflow by applying Decentralized Rainwater Retention Facilities for Chunggyechun in Seoul of Korea

NASA Astrophysics Data System (ADS)

Park, J. H.; Jun, S. M.; Park, C. G.

2014-12-01

Recently abnormal climate phenomena and urbanization recently causes the changes of the hydrological environment. To restore the hydrological cycle in urban area some fundamental solutions such as decentralized rainwater management system and Low Impact Development (LID) techniques may be choosed. In this study, SWMM 5 was used to analyze the effects of decentralized stormwater retention for preventing the urban flood and securing the instreamflow. The Chunggyechun stream watershed(21.29㎢) which is located in Seoul city(Korea) and fully developed as urban area was selected as the study watershed, and the runoff characteristics of urban stream with various methods of LID techniques (Permeable pavement, small rainwater storage tank, large rainwater storage tank) were analyzed. By the simulation results, the permeability of pavement materials and detention storage at the surface soil layer make high effect to the flood discharge, and the initial rainfall retention at the rainwater storage tank effected to reduce the flood peak. The peak discharge was decreased as 22% for the design precipitation. Moreover the instreamflow was increased as 55% by using adequate LID techniques These kind of data could be used as the basis data for designing urban flood prevention facilities, urban regeneration planning in the view of the integrated watershed management.

Fuels planning: science synthesis and integration; environmental consequences fact sheet 11: Smoke Impact Spreadsheet (SIS) model

Treesearch

Trent Wickman; Ann Acheson

2005-01-01

The Smoke Impact Spreadsheet (SIS) is a simple-to-use planning model for calculating particulate matter (PM) emissions and concentrations downwind of wildland fires. This fact sheet identifies the intended users and uses, required inputs, what the model does and does not do, and tells the user how to obtain the model.

Characterizing longitudinal health state transitions among heroin, cocaine, and methamphetamine users

PubMed Central

Nosyk, B; Li, L; Evans, E; Huang, D; Min, J; Kerr, T; Brecht, ML; Hser, YI

2014-01-01

Aims Characterize longitudinal patterns of drug use careers and identify determinants of drug use frequency across cohorts of primary heroin, methamphetamine (MA) and cocaine users. Design Pooled analysis of prospective cohort studies. Settings Illicit drug users recruited from community, criminal justice and drug treatment settings in California, USA. Participants We used longitudinal data on from five observational cohort studies featuring primary users of heroin (N=629), cocaine (N=694) and methamphetamine (N=474). The mean duration of follow-up was 20.9 years. Measurements Monthly longitudinal data was arranged according to five health states (incarceration, drug treatment, abstinence, non-daily and daily use). We fitted proportional hazards (PH) frailty models to determine independent differences in successive episode durations. We then executed multi-state Markov (MSM) models to estimate probabilities of transitioning between health states, and the determinants of these transitions. Findings Across primary drug use types, PH frailty models demonstrated durations of daily use diminished in successive episodes over time. MSM models revealed primary stimulant users had more erratic longitudinal patterns of drug use, transitioning more rapidly between periods of treatment, abstinence, non-daily and daily use. MA users exhibited relatively longer durations of high-frequency use. Criminal engagement had a destabilizing effect on health state durations across drug types. Longer incarceration histories were associated with delayed transitions towards cessation. Conclusions PH frailty and MSM modeling techniques provided complementary information on longitudinal patterns of drug abuse. This information can inform clinical practice and policy, and otherwise be used in health economic simulation models, designed to inform resource allocation decisions. PMID:24837584

Lightweight Adaptation of Classifiers to Users and Contexts: Trends of the Emerging Domain

PubMed Central

Vildjiounaite, Elena; Gimel'farb, Georgy; Kyllönen, Vesa; Peltola, Johannes

2015-01-01

Intelligent computer applications need to adapt their behaviour to contexts and users, but conventional classifier adaptation methods require long data collection and/or training times. Therefore classifier adaptation is often performed as follows: at design time application developers define typical usage contexts and provide reasoning models for each of these contexts, and then at runtime an appropriate model is selected from available ones. Typically, definition of usage contexts and reasoning models heavily relies on domain knowledge. However, in practice many applications are used in so diverse situations that no developer can predict them all and collect for each situation adequate training and test databases. Such applications have to adapt to a new user or unknown context at runtime just from interaction with the user, preferably in fairly lightweight ways, that is, requiring limited user effort to collect training data and limited time of performing the adaptation. This paper analyses adaptation trends in several emerging domains and outlines promising ideas, proposed for making multimodal classifiers user-specific and context-specific without significant user efforts, detailed domain knowledge, and/or complete retraining of the classifiers. Based on this analysis, this paper identifies important application characteristics and presents guidelines to consider these characteristics in adaptation design. PMID:26473165

Guided exploration in virtual environments

NASA Astrophysics Data System (ADS)

Beckhaus, Steffi; Eckel, Gerhard; Strothotte, Thomas

2001-06-01

We describe an application supporting alternating interaction and animation for the purpose of exploration in a surround- screen projection-based virtual reality system. The exploration of an environment is a highly interactive and dynamic process in which the presentation of objects of interest can give the user guidance while exploring the scene. Previous systems for automatic presentation of models or scenes need either cinematographic rules, direct human interaction, framesets or precalculation (e.g. precalculation of paths to a predefined goal). We report on the development of a system that can deal with rapidly changing user interest in objects of a scene or model as well as with dynamic models and changes of the camera position introduced interactively by the user. It is implemented as a potential-field based camera data generating system. In this paper we describe the implementation of our approach in a virtual art museum on the CyberStage, our surround-screen projection-based stereoscopic display. The paradigm of guided exploration is introduced describing the freedom of the user to explore the museum autonomously. At the same time, if requested by the user, guided exploration provides just-in-time navigational support. The user controls this support by specifying the current field of interest in high-level search criteria. We also present an informal user study evaluating this approach.

The Role of Social Media User Experience as a Mediator for Understanding Social Media User Behavior in Indonesia’s Museum Industry: Literature Review

NASA Astrophysics Data System (ADS)

Sundjaja, A. M.; LumanGaol, F.; Budiarti, T.; Abbas, B. S.; Abdinagoro, S. B.; Ongowarsito, H.

2017-01-01

Social media has changed the interaction between the customer and the business, social media has proven to provide new opportunities in facilitating access to information, efficiency and ease of interaction between customers and businesses that are distributed geographically dispersed. Ease of interaction to improve access to information about products, services, and prices have proven to have a positive impact for consumers. The purpose of this article is to develop a conceptual model to test the effect of user motivation, user expectations, and online community involvement to the intention of behavior that is mediated by the use of social media museum experience. This article is a literature study on exploration of social media user experiences museum in Indonesia. Authors searched and examined 85 articles from google scholar with the following keywords: motivation, expectations, online communities, user experience, social media, Technology Acceptance Model, Experiential Marketing, Uses and Gratification Theory. Proposed data collection techniques are literature study, survey and observation. The sample used in this research is 400 respondents of social media users that follow the social media managed by Indonesia’s museum. The sampling technique are systematic sampling. We use Structural Equation Model with AMOS for analyze the data.

Jobs and Economic Development Impact (JEDI) User Reference Guide: Fast Pyrolysis Biorefinery Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Zhang, Yimin; Goldberg, Marshall

2015-02-01

This guide -- the JEDI Fast Pyrolysis Biorefinery Model User Reference Guide -- was developed to assist users in operating and understanding the JEDI Fast Pyrolysis Biorefinery Model. The guide provides information on the model's underlying methodology, as well as the parameters and data sources used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the JEDI Fast Pyrolysis Biorefinery Model estimates local (e.g., county- or state-level) job creation, earnings, and output frommore » total economic activity for a given fast pyrolysis biorefinery. These estimates include the direct, indirect and induced economic impacts to the local economy associated with the construction and operation phases of biorefinery projects.Local revenue and supply chain impacts as well as induced impacts are estimated using economic multipliers derived from the IMPLAN software program. By determining the local economic impacts and job creation for a proposed biorefinery, the JEDI Fast Pyrolysis Biorefinery Model can be used to field questions about the added value biorefineries might bring to a local community.« less

Introduction to TAFI - A Matlab® toolbox for analysis of flexural isostasy

NASA Astrophysics Data System (ADS)

Jha, S.; Harry, D. L.; Schutt, D.

2016-12-01

The isostatic response of vertical tectonic loads emplaced on thin elastic plates overlying inviscid substrate and the corresponding gravity anomalies are commonly modeled using well established theories and methodologies of flexural analysis. However, such analysis requires some mathematical and coding expertise on part of users. With that in mind, we designed a new interactive Matlab® toolbox called Toolbox for Analysis of Flexural Isostasy (TAFI). TAFI allows users to create forward models (2-D and 3-D) of flexural deformation of the lithosphere and resulting gravity anomaly. TAFI computes Green's Functions for flexure of the elastic plate subjected to point or line loads, and analytical solution for harmonic loads. Flexure due to non-impulsive, distributed 2-D or 3-D loads are computed by convolving the appropriate Green's function with a user-supplied spatially discretized load function. The gravity anomaly associated with each density interface is calculated by using the Fourier Transform of flexural deflection of these interfaces and estimating the gravity in the wavenumber domain. All models created in TAFI are based on Matlab's intrinsic functions and do not require any specialized toolbox, function or library except those distributed with TAFI. Modeling functions within TAFI can be called from Matlab workspace, from within user written programs or from the TAFI's graphical user interface (GUI). The GUI enables the user to model the flexural deflection of lithosphere interactively, enabling real time comparison of model fit with observed data constraining the flexural deformation and gravity, facilitating rapid search for best fitting flexural model. TAFI is a very useful teaching and research tool and have been tested rigorously in graduate level teaching and basic research environment.

Interprofessional learning in primary care: an exploration of the service user experience leads to a new model for co-learning.

PubMed

Worswick, Louise; Little, Christine; Ryan, Kath; Carr, Eloise

2015-01-01

Research about service user involvement in research and education focuses on the purpose, the methods, the barriers and the impact of their involvement. Few studies report on the experience of the service users who get involved. This paper reports an exploration of the experience of service users who participated in an interprofessional educational initiative in primary care - the Learning to Improve the Management of Back Pain in the Community (LIMBIC) project. Service users attended workshops with practice teams and assisted them in developing small scale quality improvement projects to improve their provision of care for people with back pain. To explore the experience of service users involved in the LIMBIC project. Using the philosophical and methodological approaches of pragmatism this study analysed data from the wider LIMBIC project and collected primary data through semi structured interviews with service users. Secondary data were reanalysed and integrated with primary data to address the research question. The study was undertaken in the primary health care setting. Patients participated as service users in workshops and quality improvement projects with members from their practice teams. Interviews with service users were transcribed and analysed thematically. Document and thematic analyses of secondary data from the LIMBIC project included focus group transcripts, patient stories, film, emails, meeting notes, a wiki and educational material such as presentations. Themes identified through the analyses illustrated the importance, to the service users, of the sense of community, of clear communication, and of influencing change through involvement. A model for co-learning with service users resulted from the analyses. The experience of service users can be optimised by planning, preparation and support so that their wealth of expertise can be recognised and utilised. A model for co-learning was developed and is presented in this paper. Copyright © 2014 Elsevier Ltd. All rights reserved.

Model-Driven Useware Engineering

NASA Astrophysics Data System (ADS)

Meixner, Gerrit; Seissler, Marc; Breiner, Kai

User-oriented hardware and software development relies on a systematic development process based on a comprehensive analysis focusing on the users' requirements and preferences. Such a development process calls for the integration of numerous disciplines, from psychology and ergonomics to computer sciences and mechanical engineering. Hence, a correspondingly interdisciplinary team must be equipped with suitable software tools to allow it to handle the complexity of a multimodal and multi-device user interface development approach. An abstract, model-based development approach seems to be adequate for handling this complexity. This approach comprises different levels of abstraction requiring adequate tool support. Thus, in this chapter, we present the current state of our model-based software tool chain. We introduce the use model as the core model of our model-based process, transformation processes, and a model-based architecture, and we present different software tools that provide support for creating and maintaining the models or performing the necessary model transformations.

Analysis on trust influencing factors and trust model from multiple perspectives of online Auction

NASA Astrophysics Data System (ADS)

Yu, Wang

2017-10-01

Current reputation models lack the research on online auction trading completely so they cannot entirely reflect the reputation status of users and may cause problems on operability. To evaluate the user trust in online auction correctly, a trust computing model based on multiple influencing factors is established. It aims at overcoming the efficiency of current trust computing methods and the limitations of traditional theoretical trust models. The improved model comprehensively considers the trust degree evaluation factors of three types of participants according to different participation modes of online auctioneers, to improve the accuracy, effectiveness and robustness of the trust degree. The experiments test the efficiency and the performance of our model under different scale of malicious user, under environment like eBay and Sporas model. The experimental results analysis show the model proposed in this paper makes up the deficiency of existing model and it also has better feasibility.

CHISSL: A Human-Machine Collaboration Space for Unsupervised Learning

DOE Office of Scientific and Technical Information (OSTI.GOV)

Arendt, Dustin L.; Komurlu, Caner; Blaha, Leslie M.

We developed CHISSL, a human-machine interface that utilizes supervised machine learning in an unsupervised context to help the user group unlabeled instances by her own mental model. The user primarily interacts via correction (moving a misplaced instance into its correct group) or confirmation (accepting that an instance is placed in its correct group). Concurrent with the user's interactions, CHISSL trains a classification model guided by the user's grouping of the data. It then predicts the group of unlabeled instances and arranges some of these alongside the instances manually organized by the user. We hypothesize that this mode of human andmore » machine collaboration is more effective than Active Learning, wherein the machine decides for itself which instances should be labeled by the user. We found supporting evidence for this hypothesis in a pilot study where we applied CHISSL to organize a collection of handwritten digits.« less

Emotional persistence in online chatting communities

NASA Astrophysics Data System (ADS)

Garas, Antonios; Garcia, David; Skowron, Marcin; Schweitzer, Frank

2012-05-01

How do users behave in online chatrooms, where they instantaneously read and write posts? We analyzed about 2.5 million posts covering various topics in Internet relay channels, and found that user activity patterns follow known power-law and stretched exponential distributions, indicating that online chat activity is not different from other forms of communication. Analysing the emotional expressions (positive, negative, neutral) of users, we revealed a remarkable persistence both for individual users and channels. I.e. despite their anonymity, users tend to follow social norms in repeated interactions in online chats, which results in a specific emotional ``tone'' of the channels. We provide an agent-based model of emotional interaction, which recovers qualitatively both the activity patterns in chatrooms and the emotional persistence of users and channels. While our assumptions about agent's emotional expressions are rooted in psychology, the model allows to test different hypothesis regarding their emotional impact in online communication.

Emotional persistence in online chatting communities

PubMed Central

Garas, Antonios; Garcia, David; Skowron, Marcin; Schweitzer, Frank

2012-01-01

How do users behave in online chatrooms, where they instantaneously read and write posts? We analyzed about 2.5 million posts covering various topics in Internet relay channels, and found that user activity patterns follow known power-law and stretched exponential distributions, indicating that online chat activity is not different from other forms of communication. Analysing the emotional expressions (positive, negative, neutral) of users, we revealed a remarkable persistence both for individual users and channels. I.e. despite their anonymity, users tend to follow social norms in repeated interactions in online chats, which results in a specific emotional “tone” of the channels. We provide an agent-based model of emotional interaction, which recovers qualitatively both the activity patterns in chatrooms and the emotional persistence of users and channels. While our assumptions about agent's emotional expressions are rooted in psychology, the model allows to test different hypothesis regarding their emotional impact in online communication. PMID:22577512

FHWA traffic noise model, version 1.0 : user's guide

DOT National Transportation Integrated Search

1998-01-01

This User's Guide is for the Federal Highway Administration's Traffic Noise Model (FHWA TNM), Version 1.0 -- the FHWAs computer program for highway traffic noise prediction and analysis. Two companion reports, a Technical Manual and a data repor...

I’ll Be Back: On the Multiple Lives of Users of a Mobile Activity Tracking Application

PubMed Central

Lin, Zhiyuan; Althoff, Tim; Leskovec, Jure

2018-01-01

Mobile health applications that track activities, such as exercise, sleep, and diet, are becoming widely used. While these activity tracking applications have the potential to improve our health, user engagement and retention are critical factors for their success. However, long-term user engagement patterns in real-world activity tracking applications are not yet well understood. Here we study user engagement patterns within a mobile physical activity tracking application consisting of 115 million logged activities taken by over a million users over 31 months. Specifically, we show that over 75% of users return and re-engage with the application after prolonged periods of inactivity, no matter the duration of the inactivity. We find a surprising result that the re-engagement usage patterns resemble those of the start of the initial engagement period, rather than being a simple continuation of the end of the initial engagement period. This evidence points to a conceptual model of multiple lives of user engagement, extending the prevalent single life view of user activity. We demonstrate that these multiple lives occur because the users have a variety of different primary intents or goals for using the app. These primary intents are associated with how long each life lasts and how likely the user is to re-engage for a new life. We find evidence for users being more likely to stop using the app once they achieved their primary intent or goal (e.g., weight loss). However, these users might return once their original intent resurfaces (e.g., wanting to lose newly gained weight). We discuss implications of the multiple life paradigm and propose a novel prediction task of predicting the number of lives of a user. Based on insights developed in this work, including a marker of improved primary intent performance, our prediction models achieve 71% ROC AUC. Overall, our research has implications for modeling user re-engagement in health activity tracking applications and has consequences for how notifications, recommendations as well as gamification can be used to increase engagement. PMID:29780978

Big data privacy protection model based on multi-level trusted system

NASA Astrophysics Data System (ADS)

Zhang, Nan; Liu, Zehua; Han, Hongfeng

2018-05-01

This paper introduces and inherit the multi-level trusted system model that solves the Trojan virus by encrypting the privacy of user data, and achieve the principle: "not to read the high priority hierarchy, not to write the hierarchy with low priority". Thus ensuring that the low-priority data privacy leak does not affect the disclosure of high-priority data privacy. This paper inherits the multi-level trustworthy system model of Trojan horse and divides seven different risk levels. The priority level 1˜7 represent the low to high value of user data privacy, and realize seven kinds of encryption with different execution efficiency Algorithm, the higher the priority, the greater the value of user data privacy, at the expense of efficiency under the premise of choosing a more encrypted encryption algorithm to ensure data security. For enterprises, the price point is determined by the unit equipment users to decide the length of time. The higher the risk sub-group algorithm, the longer the encryption time. The model assumes that users prefer the lower priority encryption algorithm to ensure efficiency. This paper proposes a privacy cost model for each of the seven risk subgroups. Among them, the higher the privacy cost, the higher the priority of the risk sub-group, the higher the price the user needs to pay to ensure the privacy of the data. Furthermore, by introducing the existing pricing model of economics and the human traffic model proposed by this paper and fluctuating with the market demand, this paper improves the price of unit products when the market demand is low. On the other hand, when the market demand increases, the profit of the enterprise will be guaranteed under the guidance of the government by reducing the price per unit of product. Then, this paper introduces the dynamic factors of consumers' mood and age to optimize. At the same time, seven algorithms are selected from symmetric and asymmetric encryption algorithms to define the enterprise costs at different levels. Therefore, the proposed model solves the continuous influence caused by cascading events and ensures that the disclosure of low-level data privacy of users does not affect the high-level data privacy, thus greatly improving the safety of the private information of user.

User's Manual for HPTAM: a Two-Dimensional Heat Pipe Transient Analysis Model, Including the Startup from a Frozen State

NASA Technical Reports Server (NTRS)

Tournier, Jean-Michel; El-Genk, Mohamed S.

1995-01-01

This report describes the user's manual for 'HPTAM,' a two-dimensional Heat Pipe Transient Analysis Model. HPTAM is described in detail in the UNM-ISNPS-3-1995 report which accompanies the present manual. The model offers a menu that lists a number of working fluids and wall and wick materials from which the user can choose. HPTAM is capable of simulating the startup of heat pipes from either a fully-thawed or frozen condition of the working fluid in the wick structure. The manual includes instructions for installing and running HPTAM on either a UNIX, MS-DOS or VMS operating system. Samples for input and output files are also provided to help the user with the code.

UIVerify: A Web-Based Tool for Verification and Automatic Generation of User Interfaces

NASA Technical Reports Server (NTRS)

Shiffman, Smadar; Degani, Asaf; Heymann, Michael

2004-01-01

In this poster, we describe a web-based tool for verification and automatic generation of user interfaces. The verification component of the tool accepts as input a model of a machine and a model of its interface, and checks that the interface is adequate (correct). The generation component of the tool accepts a model of a given machine and the user's task, and then generates a correct and succinct interface. This write-up will demonstrate the usefulness of the tool by verifying the correctness of a user interface to a flight-control system. The poster will include two more examples of using the tool: verification of the interface to an espresso machine, and automatic generation of a succinct interface to a large hypothetical machine.

Specializing network analysis to detect anomalous insider actions

PubMed Central

Chen, You; Nyemba, Steve; Zhang, Wen; Malin, Bradley

2012-01-01

Collaborative information systems (CIS) enable users to coordinate efficiently over shared tasks in complex distributed environments. For flexibility, they provide users with broad access privileges, which, as a side-effect, leave such systems vulnerable to various attacks. Some of the more damaging malicious activities stem from internal misuse, where users are authorized to access system resources. A promising class of insider threat detection models for CIS focuses on mining access patterns from audit logs, however, current models are limited in that they assume organizations have significant resources to generate label cases for training classifiers or assume the user has committed a large number of actions that deviate from “normal” behavior. In lieu of the previous assumptions, we introduce an approach that detects when specific actions of an insider deviate from expectation in the context of collaborative behavior. Specifically, in this paper, we introduce a specialized network anomaly detection model, or SNAD, to detect such events. This approach assesses the extent to which a user influences the similarity of the group of users that access a particular record in the CIS. From a theoretical perspective, we show that the proposed model is appropriate for detecting insider actions in dynamic collaborative systems. From an empirical perspective, we perform an extensive evaluation of SNAD with the access logs of two distinct environments: the patient record access logs a large electronic health record system (6,015 users, 130,457 patients and 1,327,500 accesses) and the editing logs of Wikipedia (2,394,385 revisors, 55,200 articles and 6,482,780 revisions). We compare our model with several competing methods and demonstrate SNAD is significantly more effective: on average it achieves 20–30% greater area under an ROC curve. PMID:23399988

Detection of Anomalous Insiders in Collaborative Environments via Relational Analysis of Access Logs

PubMed Central

Chen, You; Malin, Bradley

2014-01-01

Collaborative information systems (CIS) are deployed within a diverse array of environments, ranging from the Internet to intelligence agencies to healthcare. It is increasingly the case that such systems are applied to manage sensitive information, making them targets for malicious insiders. While sophisticated security mechanisms have been developed to detect insider threats in various file systems, they are neither designed to model nor to monitor collaborative environments in which users function in dynamic teams with complex behavior. In this paper, we introduce a community-based anomaly detection system (CADS), an unsupervised learning framework to detect insider threats based on information recorded in the access logs of collaborative environments. CADS is based on the observation that typical users tend to form community structures, such that users with low a nity to such communities are indicative of anomalous and potentially illicit behavior. The model consists of two primary components: relational pattern extraction and anomaly detection. For relational pattern extraction, CADS infers community structures from CIS access logs, and subsequently derives communities, which serve as the CADS pattern core. CADS then uses a formal statistical model to measure the deviation of users from the inferred communities to predict which users are anomalies. To empirically evaluate the threat detection model, we perform an analysis with six months of access logs from a real electronic health record system in a large medical center, as well as a publicly-available dataset for replication purposes. The results illustrate that CADS can distinguish simulated anomalous users in the context of real user behavior with a high degree of certainty and with significant performance gains in comparison to several competing anomaly detection models. PMID:25485309

Applying Human-Centered Design Methods to Scientific Communication Products

NASA Astrophysics Data System (ADS)

Burkett, E. R.; Jayanty, N. K.; DeGroot, R. M.

2016-12-01

Knowing your users is a critical part of developing anything to be used or experienced by a human being. User interviews, journey maps, and personas are all techniques commonly employed in human-centered design practices because they have proven effective for informing the design of products and services that meet the needs of users. Many non-designers are unaware of the usefulness of personas and journey maps. Scientists who are interested in developing more effective products and communication can adopt and employ user-centered design approaches to better reach intended audiences. Journey mapping is a qualitative data-collection method that captures the story of a user's experience over time as related to the situation or product that requires development or improvement. Journey maps help define user expectations, where they are coming from, what they want to achieve, what questions they have, their challenges, and the gaps and opportunities that can be addressed by designing for them. A persona is a tool used to describe the goals and behavioral patterns of a subset of potential users or customers. The persona is a qualitative data model that takes the form of a character profile, built upon data about the behaviors and needs of multiple users. Gathering data directly from users avoids the risk of basing models on assumptions, which are often limited by misconceptions or gaps in understanding. Journey maps and user interviews together provide the data necessary to build the composite character that is the persona. Because a persona models the behaviors and needs of the target audience, it can then be used to make informed product design decisions. We share the methods and advantages of developing and using personas and journey maps to create more effective science communication products.

40 CFR Appendix B to Subpart E of... - Federal Guidelines-User Charges for Operation and Maintenance of Publicly Owned Treatment Works

Code of Federal Regulations, 2011 CFR

2011-07-01

.... S = Concentration of SS from a user above a base level. Pc = O&M cost for treatment of a unit of any...(B)=Sc(S)=Pc(P)]Vu (3) Model No. 3. This model is commonly called the “quantity/quality formula”: Cu = Vc Vu=Bc Bu=Sc Su=Pc Pu (h) Other considerations. (1) Quantity discounts to large volume users will...

The Motivational Appeal of Interactive Storytelling: Towards a Dimensional Model of the User Experience

NASA Astrophysics Data System (ADS)

Roth, Christian; Vorderer, Peter; Klimmt, Christoph

A conceptual account to the quality of the user experience that interactive storytelling intends to facilitate is introduced. Building on socialscientific research from 'old' entertainment media, the experiential qualities of curiosity, suspense, aesthetic pleasantness, self-enhancement, and optimal task engagement ("flow") are proposed as key elements of a theory of user experience in interactive storytelling. Perspectives for the evolution of the model, research and application are briefly discussed.

Disconfirming User Expectations of the Online Service Experience: Inferred versus Direct Disconfirmation Modeling.

ERIC Educational Resources Information Center

O'Neill, Martin; Palmer, Adrian; Wright, Christine

2003-01-01

Disconfirmation models of online service measurement seek to define service quality as the difference between user expectations of the service to be received and perceptions of the service actually received. Two such models-inferred and direct disconfirmation-for measuring quality of the online experience are compared (WebQUAL, SERVQUAL). Findings…

SWAT Check: A screening tool to assist users in the identification of potential model application problems

USDA-ARS?s Scientific Manuscript database

The Soil and Water Assessment Tool (SWAT) is a basin scale hydrologic model developed by the US Department of Agriculture-Agricultural Research Service. SWAT's broad applicability, user friendly model interfaces, and automatic calibration software have led to a rapid increase in the number of new u...

National Centers for Environmental Prediction

Science.gov Websites

Modeling Mesoscale Modeling Marine Modeling and Analysis Teams Climate Data Assimilation Ensembles and Post do data transfer from Gaea to Vapor; DTN (Nwave) has set up for all users but wants one user to test numerous cpu intensive scripts? Click here to view more information Open Effects of the problem: NCEP pre

The Effects of Selected Modelling Parameters on the Computed Optical Frequency Signatures of Naval Platforms

DTIC Science & Technology

2009-04-01

Contrast signature plots for the simple wireframe model with user-defined thermal boundary conditions and an exhaust plume ...boundary conditions but no exhaust plume ................................................................................. 25 A.3. Contrast signature...plots for the simple wireframe model with no user-defined thermal boundary conditions or exhaust plume

An evolving model of online bipartite networks

NASA Astrophysics Data System (ADS)

Zhang, Chu-Xu; Zhang, Zi-Ke; Liu, Chuang

2013-12-01

Understanding the structure and evolution of online bipartite networks is a significant task since they play a crucial role in various e-commerce services nowadays. Recently, various attempts have been tried to propose different models, resulting in either power-law or exponential degree distributions. However, many empirical results show that the user degree distribution actually follows a shifted power-law distribution, the so-called Mandelbrot’s law, which cannot be fully described by previous models. In this paper, we propose an evolving model, considering two different user behaviors: random and preferential attachment. Extensive empirical results on two real bipartite networks, Delicious and CiteULike, show that the theoretical model can well characterize the structure of real networks for both user and object degree distributions. In addition, we introduce a structural parameter p, to demonstrate that the hybrid user behavior leads to the shifted power-law degree distribution, and the region of power-law tail will increase with the increment of p. The proposed model might shed some lights in understanding the underlying laws governing the structure of real online bipartite networks.

On the next generation of reliability analysis tools

NASA Technical Reports Server (NTRS)

Babcock, Philip S., IV; Leong, Frank; Gai, Eli

1987-01-01

The current generation of reliability analysis tools concentrates on improving the efficiency of the description and solution of the fault-handling processes and providing a solution algorithm for the full system model. The tools have improved user efficiency in these areas to the extent that the problem of constructing the fault-occurrence model is now the major analysis bottleneck. For the next generation of reliability tools, it is proposed that techniques be developed to improve the efficiency of the fault-occurrence model generation and input. Further, the goal is to provide an environment permitting a user to provide a top-down design description of the system from which a Markov reliability model is automatically constructed. Thus, the user is relieved of the tedious and error-prone process of model construction, permitting an efficient exploration of the design space, and an independent validation of the system's operation is obtained. An additional benefit of automating the model construction process is the opportunity to reduce the specialized knowledge required. Hence, the user need only be an expert in the system he is analyzing; the expertise in reliability analysis techniques is supplied.

Data Model for Multi Hazard Risk Assessment Spatial Support Decision System

NASA Astrophysics Data System (ADS)

Andrejchenko, Vera; Bakker, Wim; van Westen, Cees

2014-05-01

The goal of the CHANGES Spatial Decision Support System is to support end-users in making decisions related to risk reduction measures for areas at risk from multiple hydro-meteorological hazards. The crucial parts in the design of the system are the user requirements, the data model, the data storage and management, and the relationships between the objects in the system. The implementation of the data model is carried out entirely with an open source database management system with a spatial extension. The web application is implemented using open source geospatial technologies with PostGIS as the database, Python for scripting, and Geoserver and javascript libraries for visualization and the client-side user-interface. The model can handle information from different study areas (currently, study areas from France, Romania, Italia and Poland are considered). Furthermore, the data model handles information about administrative units, projects accessible by different types of users, user-defined hazard types (floods, snow avalanches, debris flows, etc.), hazard intensity maps of different return periods, spatial probability maps, elements at risk maps (buildings, land parcels, linear features etc.), economic and population vulnerability information dependent on the hazard type and the type of the element at risk, in the form of vulnerability curves. The system has an inbuilt database of vulnerability curves, but users can also add their own ones. Included in the model is the management of a combination of different scenarios (e.g. related to climate change, land use change or population change) and alternatives (possible risk-reduction measures), as well as data-structures for saving the calculated economic or population loss or exposure per element at risk, aggregation of the loss and exposure using the administrative unit maps, and finally, producing the risk maps. The risk data can be used for cost-benefit analysis (CBA) and multi-criteria evaluation (SMCE). The data model includes data-structures for CBA and SMCE. The model is at the stage where risk and cost-benefit calculations can be stored but the remaining part is currently under development. Multi-criteria information, user management and the relation of these with the rest of the model is our next step. Having a carefully designed data model plays a crucial role in the development of the whole system for rapid development, keeping the data consistent, and in the end, support the end-user in making good decisions in risk-reduction measures related to multiple natural hazards. This work is part of the EU FP7 Marie Curie ITN "CHANGES"project (www.changes-itn.edu)

[Patients and quality of primary health care services. Survey of practitioners at the Bahía de Cádiz and La Janda health centers].

PubMed

Hernán García, M; Gutiérrez Cuadra, J L; Lineros González, C; Ruiz Barbosa, C; Rabadán Asensio, A

2002-10-31

To report the opinions of practitioners at health centers on dimensions of quality that affect user satisfaction. Cross-sectional study of focus groups (FG). Bahía de Cádiz and La Janda health centers in southwestern Spain. We studied 4 FG whose participants were staff members of the two health centers: FG1, physicians; FG2, user satisfaction service staff; FG3, social workers; FG4, nurses. The groups were based on the different functions of staff at the two centers. The analysis was based on variables in the SERCAL model (an adaptation of the SERVQUAL model for the Spanish health care system) of opinions regarding service quality: access, comfort (tangibles), personalized service (courtesy), competence, and loyalty. The data were analyzed with version N-Vivo of the NUDIST program. All dimensions of the theoretical model were identified by practitioners as constructs of users' perceptions of service quality. Users' and practitioners' views contrasted with and complemented each other to generate a model that could be validated. Access, personalized service and problem-solving (responsiveness) were key variables. Practitioners' opinions provided information of use in improving the quality model. Differences in opinion between users and practitioners merit further study based on an understanding of these groups' values and interests, and on the care provision context. Practitioners identified access, personalized service and problem-solving as features that influenced users' opinions of the quality of the health center.

Transmission Line Jobs and Economic Development Impact (JEDI) Model User Reference Guide

DOE Office of Scientific and Technical Information (OSTI.GOV)

Goldberg, M.; Keyser, D.

The Jobs and Economic Development Impact (JEDI) models, developed through the National Renewable Energy Laboratory (NREL), are freely available, user-friendly tools that estimate the potential economic impacts of constructing and operating power generation projects for a range of conventional and renewable energy technologies. The Transmission Line JEDI model can be used to field questions about the economic impacts of transmission lines in a given state, region, or local community. This Transmission Line JEDI User Reference Guide was developed to provide basic instruction on operating the model and understanding the results. This guide also provides information on the model's underlying methodology,more » as well as the parameters and references used to develop the cost data contained in the model.« less

Text messaging: are dependency and Excessive Use discretely different for Japanese university students?

PubMed

Lu, Xi; Katoh, Takahiko; Chen, Zi; Nagata, Toshiaki; Kitamura, Toshinori

2014-05-15

Text messaging may be excessive and young people may be dependent on it. We distributed the Self-perception of Text-message Dependency Scale (STDS), Hospital Anxiety and Depression Scale (HADS), Temperament and Character Inventory (TCI), and Relationship Questionnaire (RQ) to 223 Japanese university students in a two-wave study, separated by a 5-month interval. The STDS yielded a three-factor structure. The STDS scores across the two measurement occasions were stable across time (except for the Relationship Maintenance subscale). A hierarchical cluster analysis suggested a three-class structure interpreted as Normal Users, Excessive Users, and Dependent Users. Excessive Users and Dependent Users were characterized by a young age at initial mobile phone use, more frequent use of text messaging, higher Novelty Seeking, and better Other-Model patterns of adult attachment. Unlike Excessive Users, Dependent Users were characterized by lower Self-directedness, poorer Self-Model of adult attachment, and higher anxiety and depression. The Excessive Users, but not the Dependent Users, were characterized by high Reward Dependence and Co-operativeness. The present study demonstrated that the STDS has a robust factor structure, good construct validity, and temporal stability (except for Relationship Maintenance subscale); students could be classified into normal, excessive, and Dependent Users of the text messaging; and Dependent Users were characterized by Excessive Use and personality immaturity. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Marijuana Use Trajectories and Academic Outcomes among College Students

PubMed Central

Suerken, Cynthia K.; Reboussin, Beth A.; Egan, Kathleen L.; Sutfin, Erin L.; Wagoner, Kimberly G.; Spangler, John; Wolfson, Mark

2016-01-01

Background Marijuana is the most commonly used illicit drug by college students. Prior studies have established an association between marijuana use and poor academic performance in college, but research on the frequency of marijuana use over the entire college career is limited. The study objective was to examine the association of marijuana use trajectories on academic outcomes, including senior year enrollment, plans to graduate on time, and GPA. Methods Data were collected from a cohort of 3,146 students from 11 colleges in North Carolina and Virginia at six time points across the college career. Group-based trajectory models were used to characterize longitudinal marijuana use patterns during college. Associations between marijuana trajectory groups and academic outcomes were modeled using random-effects linear and logistic regressions. Results Five marijuana trajectory groups were identified: non-users (69.0%), infrequent users (16.6%), decreasing users (4.7%), increasing users (5.8%), and frequent users (3.9%). Decreasing users and frequent users were more likely to drop out of college and plan to delay graduation when compared to non-users. All marijuana user groups reported lower GPAs, on average, than non-users. Conclusion These results identify marijuana use patterns that put students at risk for poor academic performance in college. Students who use marijuana frequently at the beginning of the college career are especially at risk for lower academic achievement than non-users, suggesting that early intervention is critical. PMID:27020322

Modeling of information diffusion in Twitter-like social networks under information overload.

PubMed

Li, Pei; Li, Wei; Wang, Hui; Zhang, Xin

2014-01-01

Due to the existence of information overload in social networks, it becomes increasingly difficult for users to find useful information according to their interests. This paper takes Twitter-like social networks into account and proposes models to characterize the process of information diffusion under information overload. Users are classified into different types according to their in-degrees and out-degrees, and user behaviors are generalized into two categories: generating and forwarding. View scope is introduced to model the user information-processing capability under information overload, and the average number of times a message appears in view scopes after it is generated by a given type user is adopted to characterize the information diffusion efficiency, which is calculated theoretically. To verify the accuracy of theoretical analysis results, we conduct simulations and provide the simulation results, which are consistent with the theoretical analysis results perfectly. These results are of importance to understand the diffusion dynamics in social networks, and this analysis framework can be extended to consider more realistic situations.

Wildlife in the cloud: a new approach for engaging stakeholders in wildlife management.

PubMed

Chapron, Guillaume

2015-11-01

Research in wildlife management increasingly relies on quantitative population models. However, a remaining challenge is to have end-users, who are often alienated by mathematics, benefiting from this research. I propose a new approach, 'wildlife in the cloud,' to enable active learning by practitioners from cloud-based ecological models whose complexity remains invisible to the user. I argue that this concept carries the potential to overcome limitations of desktop-based software and allows new understandings of human-wildlife systems. This concept is illustrated by presenting an online decision-support tool for moose management in areas with predators in Sweden. The tool takes the form of a user-friendly cloud-app through which users can compare the effects of alternative management decisions, and may feed into adjustment of their hunting strategy. I explain how the dynamic nature of cloud-apps opens the door to different ways of learning, informed by ecological models that can benefit both users and researchers.

Optimization model for UDWDM-PON deployment based on physical restrictions and asymmetric user's clustering

NASA Astrophysics Data System (ADS)

Arévalo, Germán. V.; Hincapié, Roberto C.; Sierra, Javier E.

2015-09-01

UDWDM PON is a leading technology oriented to provide ultra-high bandwidth to final users while profiting the physical channels' capability. One of the main drawbacks of UDWDM technique is the fact that the nonlinear effects, like FWM, become stronger due to the close spectral proximity among channels. This work proposes a model for the optimal deployment of this type of networks taking into account the fiber length limitations imposed by physical restrictions related with the fiber's data transmission as well as the users' asymmetric distribution in a provided region. The proposed model employs the data transmission related effects in UDWDM PON as restrictions in the optimization problem and also considers the user's asymmetric clustering and the subdivision of the users region though a Voronoi geometric partition technique. Here it is considered de Voronoi dual graph, it is the Delaunay Triangulation, as the planar graph for resolving the problem related with the minimum weight of the fiber links.

Refactoring DIRT

NASA Astrophysics Data System (ADS)

Amarnath, N. S.; Pound, M. W.; Wolfire, M. G.

The Dust InfraRed ToolBox (DIRT - a part of the Web Infrared ToolShed, or WITS, located at http://dustem.astro.umd.edu) is a Java applet for modeling astrophysical processes in circumstellar shells around young and evolved stars. DIRT has been used by the astrophysics community for about 4 years. DIRT uses results from a number of numerical models of astrophysical processes, and has an AWT based user interface. DIRT has been refactored to decouple data representation from plotting and curve fitting. This makes it easier to add new kinds of astrophysical models, use the plotter in other applications, migrate the user interface to Swing components, and modify the user interface to add functionality (for example, SIRTF tools). DIRT is now an extension of two generic libraries, one of which manages data representation and caching, and the second of which manages plotting and curve fitting. This project is an example of refactoring with no impact on user interface, so the existing user community was not affected.

An Efficient Recommendation Filter Model on Smart Home Big Data Analytics for Enhanced Living Environments.

PubMed

Chen, Hao; Xie, Xiaoyun; Shu, Wanneng; Xiong, Naixue

2016-10-15

With the rapid growth of wireless sensor applications, the user interfaces and configurations of smart homes have become so complicated and inflexible that users usually have to spend a great amount of time studying them and adapting to their expected operation. In order to improve user experience, a weighted hybrid recommender system based on a Kalman Filter model is proposed to predict what users might want to do next, especially when users are located in a smart home with an enhanced living environment. Specifically, a weight hybridization method was introduced, which combines contextual collaborative filter and the contextual content-based recommendations. This method inherits the advantages of the optimum regression and the stability features of the proposed adaptive Kalman Filter model, and it can predict and revise the weight of each system component dynamically. Experimental results show that the hybrid recommender system can optimize the distribution of weights of each component, and achieve more reasonable recall and precision rates.

An Efficient Recommendation Filter Model on Smart Home Big Data Analytics for Enhanced Living Environments

PubMed Central

Chen, Hao; Xie, Xiaoyun; Shu, Wanneng; Xiong, Naixue

2016-01-01

With the rapid growth of wireless sensor applications, the user interfaces and configurations of smart homes have become so complicated and inflexible that users usually have to spend a great amount of time studying them and adapting to their expected operation. In order to improve user experience, a weighted hybrid recommender system based on a Kalman Filter model is proposed to predict what users might want to do next, especially when users are located in a smart home with an enhanced living environment. Specifically, a weight hybridization method was introduced, which combines contextual collaborative filter and the contextual content-based recommendations. This method inherits the advantages of the optimum regression and the stability features of the proposed adaptive Kalman Filter model, and it can predict and revise the weight of each system component dynamically. Experimental results show that the hybrid recommender system can optimize the distribution of weights of each component, and achieve more reasonable recall and precision rates. PMID:27754456

Modeling of Information Diffusion in Twitter-Like Social Networks under Information Overload

PubMed Central

Li, Wei

2014-01-01

Due to the existence of information overload in social networks, it becomes increasingly difficult for users to find useful information according to their interests. This paper takes Twitter-like social networks into account and proposes models to characterize the process of information diffusion under information overload. Users are classified into different types according to their in-degrees and out-degrees, and user behaviors are generalized into two categories: generating and forwarding. View scope is introduced to model the user information-processing capability under information overload, and the average number of times a message appears in view scopes after it is generated by a given type user is adopted to characterize the information diffusion efficiency, which is calculated theoretically. To verify the accuracy of theoretical analysis results, we conduct simulations and provide the simulation results, which are consistent with the theoretical analysis results perfectly. These results are of importance to understand the diffusion dynamics in social networks, and this analysis framework can be extended to consider more realistic situations. PMID:24795541

Classification of Twitter Users Who Tweet About E-Cigarettes.

PubMed

Kim, Annice; Miano, Thomas; Chew, Robert; Eggers, Matthew; Nonnemaker, James

2017-09-26

Despite concerns about their health risks, e‑cigarettes have gained popularity in recent years. Concurrent with the recent increase in e‑cigarette use, social media sites such as Twitter have become a common platform for sharing information about e-cigarettes and to promote marketing of e‑cigarettes. Monitoring the trends in e‑cigarette-related social media activity requires timely assessment of the content of posts and the types of users generating the content. However, little is known about the diversity of the types of users responsible for generating e‑cigarette-related content on Twitter. The aim of this study was to demonstrate a novel methodology for automatically classifying Twitter users who tweet about e‑cigarette-related topics into distinct categories. We collected approximately 11.5 million e‑cigarette-related tweets posted between November 2014 and October 2016 and obtained a random sample of Twitter users who tweeted about e‑cigarettes. Trained human coders examined the handles' profiles and manually categorized each as one of the following user types: individual (n=2168), vaper enthusiast (n=334), informed agency (n=622), marketer (n=752), and spammer (n=1021). Next, the Twitter metadata as well as a sample of tweets for each labeled user were gathered, and features that reflect users' metadata and tweeting behavior were analyzed. Finally, multiple machine learning algorithms were tested to identify a model with the best performance in classifying user types. Using a classification model that included metadata and features associated with tweeting behavior, we were able to predict with relatively high accuracy five different types of Twitter users that tweet about e‑cigarettes (average F 1 score=83.3%). Accuracy varied by user type, with F 1 scores of individuals, informed agencies, marketers, spammers, and vaper enthusiasts being 91.1%, 84.4%, 81.2%, 79.5%, and 47.1%, respectively. Vaper enthusiasts were the most challenging user type to predict accurately and were commonly misclassified as marketers. The inclusion of additional tweet-derived features that capture tweeting behavior was found to significantly improve the model performance-an overall F 1 score gain of 10.6%-beyond metadata features alone. This study provides a method for classifying five different types of users who tweet about e‑cigarettes. Our model achieved high levels of classification performance for most groups, and examining the tweeting behavior was critical in improving the model performance. Results can help identify groups engaged in conversations about e‑cigarettes online to help inform public health surveillance, education, and regulatory efforts. ©Annice Kim, Thomas Miano, Robert Chew, Matthew Eggers, James Nonnemaker. Originally published in JMIR Public Health and Surveillance (http://publichealth.jmir.org), 26.09.2017.

Outside users payload model

NASA Technical Reports Server (NTRS)

1985-01-01

The outside users payload model which is a continuation of documents and replaces and supersedes the July 1984 edition is presented. The time period covered by this model is 1985 through 2000. The following sections are included: (1) definition of the scope of the model; (2) discussion of the methodology used; (3) overview of total demand; (4) summary of the estimated market segmentation by launch vehicle; (5) summary of the estimated market segmentation by user type; (6) details of the STS market forecast; (7) summary of transponder trends; (8) model overview by mission category; and (9) detailed mission models. All known non-NASA, non-DOD reimbursable payloads forecast to be flown by non-Soviet-block countries are included in this model with the exception of Spacelab payloads and small self contained payloads. Certain DOD-sponsored or cosponsored payloads are included if they are reimbursable launches.

Earthquake Early Warning Beta Users: Java, Modeling, and Mobile Apps

NASA Astrophysics Data System (ADS)

Strauss, J. A.; Vinci, M.; Steele, W. P.; Allen, R. M.; Hellweg, M.

2014-12-01

Earthquake Early Warning (EEW) is a system that can provide a few to tens of seconds warning prior to ground shaking at a user's location. The goal and purpose of such a system is to reduce, or minimize, the damage, costs, and casualties resulting from an earthquake. A demonstration earthquake early warning system (ShakeAlert) is undergoing testing in the United States by the UC Berkeley Seismological Laboratory, Caltech, ETH Zurich, University of Washington, the USGS, and beta users in California and the Pacific Northwest. The beta users receive earthquake information very rapidly in real-time and are providing feedback on their experiences of performance and potential uses within their organization. Beta user interactions allow the ShakeAlert team to discern: which alert delivery options are most effective, what changes would make the UserDisplay more useful in a pre-disaster situation, and most importantly, what actions users plan to take for various scenarios. Actions could include: personal safety approaches, such as drop cover, and hold on; automated processes and procedures, such as opening elevator or fire stations doors; or situational awareness. Users are beginning to determine which policy and technological changes may need to be enacted, and funding requirements to implement their automated controls. The use of models and mobile apps are beginning to augment the basic Java desktop applet. Modeling allows beta users to test their early warning responses against various scenarios without having to wait for a real event. Mobile apps are also changing the possible response landscape, providing other avenues for people to receive information. All of these combine to improve business continuity and resiliency.

Toward a Theory of User-Based Relevance: A Call for a New Paradigm of Inquiry.

ERIC Educational Resources Information Center

Park, Taemin Kim

1994-01-01

Discusses the need to develop the concept of user-based relevance for the benefit of users and for the meaningful development of future research in information retrieval. Characteristics of users' criteria of relevance are examined; and research methodology models are considered, including naturalistic inquiry versus scientific, or rationalistic,…

14 CFR Appendix C to Part 1215 - Typical User Activity Timeline

Code of Federal Regulations, 2010 CFR

2010-01-01

... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Typical User Activity Timeline C Appendix C... RELAY SATELLITE SYSTEM (TDRSS) Pt. 1215, App. C Appendix C to Part 1215—Typical User Activity Timeline... mission model. 3 years before launch (Ref. § 1215.109(c). Submit general user requirements to permit...

User Modeling for Contextual Suggestion

DTIC Science & Technology

2014-11-01

information retrieval literature ( Salton et al., 1975). To apply this metric, we converted the user interest model into a vector representation with all...Discovering Virtual Interest Groups across Chat Rooms, International Conference on Knowledge Management and Information Sharing (KMIS 2012). [7] Salton , G., A

INM, integrated noise model, version 4.11 : user's guide, supplement

DOT National Transportation Integrated Search

1993-12-01

The Volpe National Transportation Systems Center, in support of the Federal Aviation Administration, Office of Environment and Energy, has developed Version 4.11 of the Integrated Noise Model (INM). This User's Guide is a supplement to INM, Version 3...

Emergent user behavior on Twitter modelled by a stochastic differential equation.

PubMed

Mollgaard, Anders; Mathiesen, Joachim

2015-01-01

Data from the social-media site, Twitter, is used to study the fluctuations in tweet rates of brand names. The tweet rates are the result of a strongly correlated user behavior, which leads to bursty collective dynamics with a characteristic 1/f noise. Here we use the aggregated "user interest" in a brand name to model collective human dynamics by a stochastic differential equation with multiplicative noise. The model is supported by a detailed analysis of the tweet rate fluctuations and it reproduces both the exact bursty dynamics found in the data and the 1/f noise.

Emergent User Behavior on Twitter Modelled by a Stochastic Differential Equation

PubMed Central

Mollgaard, Anders; Mathiesen, Joachim

2015-01-01

Data from the social-media site, Twitter, is used to study the fluctuations in tweet rates of brand names. The tweet rates are the result of a strongly correlated user behavior, which leads to bursty collective dynamics with a characteristic 1/f noise. Here we use the aggregated "user interest" in a brand name to model collective human dynamics by a stochastic differential equation with multiplicative noise. The model is supported by a detailed analysis of the tweet rate fluctuations and it reproduces both the exact bursty dynamics found in the data and the 1/f noise. PMID:25955783

User Preference-Based Dual-Memory Neural Model With Memory Consolidation Approach.

PubMed

Nasir, Jauwairia; Yoo, Yong-Ho; Kim, Deok-Hwa; Kim, Jong-Hwan; Nasir, Jauwairia; Yong-Ho Yoo; Deok-Hwa Kim; Jong-Hwan Kim; Nasir, Jauwairia; Yoo, Yong-Ho; Kim, Deok-Hwa; Kim, Jong-Hwan

2018-06-01

Memory modeling has been a popular topic of research for improving the performance of autonomous agents in cognition related problems. Apart from learning distinct experiences correctly, significant or recurring experiences are expected to be learned better and be retrieved easier. In order to achieve this objective, this paper proposes a user preference-based dual-memory adaptive resonance theory network model, which makes use of a user preference to encode memories with various strengths and to learn and forget at various rates. Over a period of time, memories undergo a consolidation-like process at a rate proportional to the user preference at the time of encoding and the frequency of recall of a particular memory. Consolidated memories are easier to recall and are more stable. This dual-memory neural model generates distinct episodic memories and a flexible semantic-like memory component. This leads to an enhanced retrieval mechanism of experiences through two routes. The simulation results are presented to evaluate the proposed memory model based on various kinds of cues over a number of trials. The experimental results on Mybot are also presented. The results verify that not only are distinct experiences learned correctly but also that experiences associated with higher user preference and recall frequency are consolidated earlier. Thus, these experiences are recalled more easily relative to the unconsolidated experiences.

PASMet: a web-based platform for prediction, modelling and analyses of metabolic systems

PubMed Central

Sriyudthsak, Kansuporn; Mejia, Ramon Francisco; Arita, Masanori; Hirai, Masami Yokota

2016-01-01

PASMet (Prediction, Analysis and Simulation of Metabolic networks) is a web-based platform for proposing and verifying mathematical models to understand the dynamics of metabolism. The advantages of PASMet include user-friendliness and accessibility, which enable biologists and biochemists to easily perform mathematical modelling. PASMet offers a series of user-functions to handle the time-series data of metabolite concentrations. The functions are organised into four steps: (i) Prediction of a probable metabolic pathway and its regulation; (ii) Construction of mathematical models; (iii) Simulation of metabolic behaviours; and (iv) Analysis of metabolic system characteristics. Each function contains various statistical and mathematical methods that can be used independently. Users who may not have enough knowledge of computing or programming can easily and quickly analyse their local data without software downloads, updates or installations. Users only need to upload their files in comma-separated values (CSV) format or enter their model equations directly into the website. Once the time-series data or mathematical equations are uploaded, PASMet automatically performs computation on server-side. Then, users can interactively view their results and directly download them to their local computers. PASMet is freely available with no login requirement at http://pasmet.riken.jp/ from major web browsers on Windows, Mac and Linux operating systems. PMID:27174940

Relapse Model among Iranian Drug Users: A Qualitative Study.

PubMed

Jalali, Amir; Seyedfatemi, Naiemeh; Peyrovi, Hamid

2015-01-01

Relapse is a common problem in drug user's rehabilitation program and reported in all over the country. An in-depth study on patients' experiences can be used for exploring the relapse process among drug users. Therefore, this study suggests a model for relapse process among Iranian drug users. In this qualitative study with grounded theory approach, 22 participants with rich information about the phenomenon under the study were selected using purposive, snowball and theoretical sampling methods. After obtaining the informed consent, data were collected based on face-to-face, in-depth, semi-structured interviews. All interviews were analyzed in three stages of axial, selective and open coding methods. Nine main categories emerged, including avoiding of drugs, concerns about being accepted, family atmosphere, social conditions, mental challenge, self-management, self-deception, use and remorse and a main category, feeling of loss as the core variable. Mental challenge has two subcategories, evoking pleasure and craving. Relapse model is a dynamic and systematic process including from cycles of drug avoidance to remorse with a core variable as feeling of loss.  Relapse process is a dynamic and systematic process that needs an effective control. Determining a relapse model as a clear process could be helpful in clinical sessions. RESULTS of this research have depicted relapse process among Iranian drugs user by conceptual model.

Automatic Classification of Users’ Health Information Need Context: Logistic Regression Analysis of Mouse-Click and Eye-Tracker Data

PubMed Central

Pian, Wenjing; Khoo, Christopher SG

2017-01-01

Background Users searching for health information on the Internet may be searching for their own health issue, searching for someone else’s health issue, or browsing with no particular health issue in mind. Previous research has found that these three categories of users focus on different types of health information. However, most health information websites provide static content for all users. If the three types of user health information need contexts can be identified by the Web application, the search results or information offered to the user can be customized to increase its relevance or usefulness to the user. Objective The aim of this study was to investigate the possibility of identifying the three user health information contexts (searching for self, searching for others, or browsing with no particular health issue in mind) using just hyperlink clicking behavior; using eye-tracking information; and using a combination of eye-tracking, demographic, and urgency information. Predictive models are developed using multinomial logistic regression. Methods A total of 74 participants (39 females and 35 males) who were mainly staff and students of a university were asked to browse a health discussion forum, Healthboards.com. An eye tracker recorded their examining (eye fixation) and skimming (quick eye movement) behaviors on 2 types of screens: summary result screen displaying a list of post headers, and detailed post screen. The following three types of predictive models were developed using logistic regression analysis: model 1 used only the time spent in scanning the summary result screen and reading the detailed post screen, which can be determined from the user’s mouse clicks; model 2 used the examining and skimming durations on each screen, recorded by an eye tracker; and model 3 added user demographic and urgency information to model 2. Results An analysis of variance (ANOVA) analysis found that users’ browsing durations were significantly different for the three health information contexts (P<.001). The logistic regression model 3 was able to predict the user’s type of health information context with a 10-fold cross validation mean accuracy of 84% (62/74), followed by model 2 at 73% (54/74) and model 1 at 71% (52/78). In addition, correlation analysis found that particular browsing durations were highly correlated with users’ age, education level, and the urgency of their information need. Conclusions A user’s type of health information need context (ie, searching for self, for others, or with no health issue in mind) can be identified with reasonable accuracy using just user mouse clicks that can easily be detected by Web applications. Higher accuracy can be obtained using Google glass or future computing devices with eye tracking function. PMID:29269342

Information system success model for customer relationship management system in health promotion centers.

PubMed

Choi, Wona; Rho, Mi Jung; Park, Jiyun; Kim, Kwang-Jum; Kwon, Young Dae; Choi, In Young

2013-06-01

Intensified competitiveness in the healthcare industry has increased the number of healthcare centers and propelled the introduction of customer relationship management (CRM) systems to meet diverse customer demands. This study aimed to develop the information system success model of the CRM system by investigating previously proposed indicators within the model. THE EVALUATION AREAS OF THE CRM SYSTEM INCLUDES THREE AREAS: the system characteristics area (system quality, information quality, and service quality), the user area (perceived usefulness and user satisfaction), and the performance area (personal performance and organizational performance). Detailed evaluation criteria of the three areas were developed, and its validity was verified by a survey administered to CRM system users in 13 nationwide health promotion centers. The survey data were analyzed by the structural equation modeling method, and the results confirmed that the model is feasible. Information quality and service quality showed a statistically significant relationship with perceived usefulness and user satisfaction. Consequently, the perceived usefulness and user satisfaction had significant influence on individual performance as well as an indirect influence on organizational performance. This study extends the research area on information success from general information systems to CRM systems in health promotion centers applying a previous information success model. This lays a foundation for evaluating health promotion center systems and provides a useful guide for successful implementation of hospital CRM systems.

Information System Success Model for Customer Relationship Management System in Health Promotion Centers

PubMed Central

Choi, Wona; Rho, Mi Jung; Park, Jiyun; Kim, Kwang-Jum; Kwon, Young Dae

2013-01-01

Objectives Intensified competitiveness in the healthcare industry has increased the number of healthcare centers and propelled the introduction of customer relationship management (CRM) systems to meet diverse customer demands. This study aimed to develop the information system success model of the CRM system by investigating previously proposed indicators within the model. Methods The evaluation areas of the CRM system includes three areas: the system characteristics area (system quality, information quality, and service quality), the user area (perceived usefulness and user satisfaction), and the performance area (personal performance and organizational performance). Detailed evaluation criteria of the three areas were developed, and its validity was verified by a survey administered to CRM system users in 13 nationwide health promotion centers. The survey data were analyzed by the structural equation modeling method, and the results confirmed that the model is feasible. Results Information quality and service quality showed a statistically significant relationship with perceived usefulness and user satisfaction. Consequently, the perceived usefulness and user satisfaction had significant influence on individual performance as well as an indirect influence on organizational performance. Conclusions This study extends the research area on information success from general information systems to CRM systems in health promotion centers applying a previous information success model. This lays a foundation for evaluating health promotion center systems and provides a useful guide for successful implementation of hospital CRM systems. PMID:23882416

Finding My Needle in the Haystack: Effective Personalized Re-ranking of Search Results in Prospector

NASA Astrophysics Data System (ADS)

König, Florian; van Velsen, Lex; Paramythis, Alexandros

This paper provides an overview of Prospector, a personalized Internet meta-search engine, which utilizes a combination of ontological information, ratings-based models of user interests, and complementary theme-oriented group models to recommend (through re-ranking) search results obtained from an underlying search engine. Re-ranking brings “closer to the top” those items that are of particular interest to a user or have high relevance to a given theme. A user-based, real-world evaluation has shown that the system is effective in promoting results of interest, but lags behind Google in user acceptance, possibly due to the absence of features popularized by said search engine. Overall, users would consider employing a personalized search engine to perform searches with terms that require disambiguation and / or contextualization.

The Modular Aero-Propulsion System Simulation (MAPSS) Users' Guide

NASA Technical Reports Server (NTRS)

Parker, Khary I.; Melcher, Kevin J.

2004-01-01

The Modular Aero-Propulsion System Simulation is a flexible turbofan engine simulation environment that provides the user a platform to develop advanced control algorithms. It is capable of testing the performance of control designs on a validated and verified generic engine model. In addition, it is able to generate state-space linear models of the engine model to aid in controller design. The engine model used in MAPSS is a generic high-pressure ratio, dual-spool, lowbypass, military-type, variable cycle turbofan engine with a digital controller. MAPSS is controlled by a graphical user interface (GUI) and this guide explains how to use it to take advantage of the capabilities of MAPSS.

An approach to developing user interfaces for space systems

NASA Astrophysics Data System (ADS)

Shackelford, Keith; McKinney, Karen

1993-08-01

Inherent weakness in the traditional waterfall model of software development has led to the definition of the spiral model. The spiral model software development lifecycle model, however, has not been applied to NASA projects. This paper describes its use in developing real time user interface software for an Environmental Control and Life Support System (ECLSS) Process Control Prototype at NASA's Marshall Space Flight Center.

The Delta Launch Vehicle Model 2914 Series

NASA Technical Reports Server (NTRS)

Gunn, C. R.

1973-01-01

The newest Delta launch vehicle configuration, Model 2914 is described for potential users together with recent flight results. A functional description of the vehicle, its performance, flight profile, flight environment, injection accuracy, spacecraft integration requirements, user organizational interfaces, launch operations, costs and reimbursable users payment plan are provided. The versatile, relatively low cost Delta has a flight demonstrated reliability record of 92 percent that has been established in 96 launches over twelve years while concurrently undergoing ten major upratings to keep pace with the ever increasing performance and reliability requirements of its users. At least 40 more launches are scheduled over the next three years from the Eastern and Western Test Ranges.

Transfer of computer software technology through workshops: The case of fish bioenergetics modeling

USGS Publications Warehouse

Johnson, B.L.

1992-01-01

A three-part program is proposed to promote the availability and use of computer software packages to fishery managers and researchers. The approach consists of journal articles that announce new technologies, technical reports that serve as user's guides, and hands-on workshops that provide direct instruction to new users. Workshops, which allow experienced users to directly instruct novices in software operation and application are important, but often neglected. The author's experience with organizing and conducting bioenergetics modeling workshops suggests the optimal workshop would take 2 days, have 10-15 participants, one computer for every two users, and one instructor for every 5-6 people.

Conical-Domain Model for Estimating GPS Ionospheric Delays

NASA Technical Reports Server (NTRS)

Sparks, Lawrence; Komjathy, Attila; Mannucci, Anthony

2009-01-01

The conical-domain model is a computational model, now undergoing development, for estimating ionospheric delays of Global Positioning System (GPS) signals. Relative to the standard ionospheric delay model described below, the conical-domain model offers improved accuracy. In the absence of selective availability, the ionosphere is the largest source of error for single-frequency users of GPS. Because ionospheric signal delays contribute to errors in GPS position and time measurements, satellite-based augmentation systems (SBASs) have been designed to estimate these delays and broadcast corrections. Several national and international SBASs are currently in various stages of development to enhance the integrity and accuracy of GPS measurements for airline navigation. In the Wide Area Augmentation System (WAAS) of the United States, slant ionospheric delay errors and confidence bounds are derived from estimates of vertical ionospheric delay modeled on a grid at regularly spaced intervals of latitude and longitude. The estimate of vertical delay at each ionospheric grid point (IGP) is calculated from a planar fit of neighboring slant delay measurements, projected to vertical using a standard, thin-shell model of the ionosphere. Interpolation on the WAAS grid enables estimation of the vertical delay at the ionospheric pierce point (IPP) corresponding to any arbitrary measurement of a user. (The IPP of a given user s measurement is the point where the GPS signal ray path intersects a reference ionospheric height.) The product of the interpolated value and the user s thin-shell obliquity factor provides an estimate of the user s ionospheric slant delay. Two types of error that restrict the accuracy of the thin-shell model are absent in the conical domain model: (1) error due to the implicit assumption that the electron density is independent of the azimuthal angle at the IPP and (2) error arising from the slant-to-vertical conversion. At low latitudes or at mid-latitudes under disturbed conditions, the accuracy of SBAS systems based upon the thin-shell model suffers due to the presence of complex ionospheric structure, high delay values, and large electron density gradients. Interpolation on the vertical delay grid serves as an additional source of delay error. The conical-domain model permits direct computation of the user s slant delay estimate without the intervening use of a vertical delay grid. The key is to restrict each fit of GPS measurements to a spatial domain encompassing signals from only one satellite. The conical domain model is so named because each fit involves a group of GPS receivers that all receive signals from the same GPS satellite (see figure); the receiver and satellite positions define a cone, the satellite position being the vertex. A user within a given cone evaluates the delay to the satellite directly, using (1) the IPP coordinates of the line of sight to the satellite and (2) broadcast fit parameters associated with the cone. The conical-domain model partly resembles the thin-shell model in that both models reduce an inherently four-dimensional problem to two dimensions. However, unlike the thin-shell model, the conical domain model does not involve any potentially erroneous simplifying assumptions about the structure of the ionosphere. In the conical domain model, the initially four-dimensional problem becomes truly two-dimensional in the sense that once a satellite location has been specified, any signal path emanating from a satellite can be identified by only two coordinates; for example, the IPP coordinates. As a consequence, a user s slant-delay estimate converges to the correct value in the limit that the receivers converge to the user s location (or, equivalently, in the limit that the measurement IPPs converge to the user s IPP).

Collective iteration behavior for online social networks

NASA Astrophysics Data System (ADS)

Liu, Jian-Guo; Li, Ren-De; Guo, Qiang; Zhang, Yi-Cheng

2018-06-01

Understanding the patterns of collective behavior in online social network (OSNs) is critical to expanding the knowledge of human behavior and tie relationship. In this paper, we investigate a specific pattern called social signature in Facebook and Wiki users' online communication behaviors, capturing the distribution of frequency of interactions between different alters over time in the ego network. The empirical results show that there are robust social signatures of interactions no matter how friends change over time, which indicates that a stable commutation pattern exists in online communication. By comparing a random null model, we find the that commutation pattern is heterogeneous between ego and alters. Furthermore, in order to regenerate the pattern of the social signature, we present a preferential interaction model, which assumes that new users intend to look for the old users with strong ties while old users have tendency to interact with new friends. The experimental results show that the presented model can reproduce the heterogeneity of social signature by adjusting 2 parameters, the number of communicating targets m and the max number of interactions n, for Facebook users, m = n = 5, for Wiki users, m = 2 and n = 8. This work helps in deeply understanding the regularity of social signature.

Involving mental health service users in suicide-related research: a qualitative inquiry model.

PubMed

Lees, David; Procter, Nicholas; Fassett, Denise; Handley, Christine

2016-03-01

To describe the research model developed and successfully deployed as part of a multi-method qualitative study investigating suicidal service-users' experiences of mental health nursing care. Quality mental health care is essential to limiting the occurrence and burden of suicide, however there is a lack of relevant research informing practice in this context. Research utilising first-person accounts of suicidality is of particular importance to expanding the existing evidence base. However, conducting ethical research to support this imperative is challenging. The model discussed here illustrates specific and more generally applicable principles for qualitative research regarding sensitive topics and involving potentially vulnerable service-users. Researching into mental health service users with first-person experience of suicidality requires stakeholder and institutional support, researcher competency, and participant recruitment, consent, confidentiality, support and protection. Research with service users into their experiences of sensitive issues such as suicidality can result in rich and valuable data, and may also provide positive experiences of collaboration and inclusivity. If challenges are not met, objectification and marginalisation of service-users may be reinforced, and limitations in the evidence base and service provision may be perpetuated.

User's Guide for the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS)

NASA Technical Reports Server (NTRS)

Frederick, Dean K.; DeCastro, Jonathan A.; Litt, Jonathan S.

2007-01-01

This report is a Users Guide for the NASA-developed Commercial Modular Aero-Propulsion System Simulation (C-MAPSS) software, which is a transient simulation of a large commercial turbofan engine (up to 90,000-lb thrust) with a realistic engine control system. The software supports easy access to health, control, and engine parameters through a graphical user interface (GUI). C-MAPSS provides the user with a graphical turbofan engine simulation environment in which advanced algorithms can be implemented and tested. C-MAPSS can run user-specified transient simulations, and it can generate state-space linear models of the nonlinear engine model at an operating point. The code has a number of GUI screens that allow point-and-click operation, and have editable fields for user-specified input. The software includes an atmospheric model which allows simulation of engine operation at altitudes from sea level to 40,000 ft, Mach numbers from 0 to 0.90, and ambient temperatures from -60 to 103 F. The package also includes a power-management system that allows the engine to be operated over a wide range of thrust levels throughout the full range of flight conditions.

Accurate and scalable social recommendation using mixed-membership stochastic block models

PubMed Central

Godoy-Lorite, Antonia; Moore, Cristopher

2016-01-01

With increasing amounts of information available, modeling and predicting user preferences—for books or articles, for example—are becoming more important. We present a collaborative filtering model, with an associated scalable algorithm, that makes accurate predictions of users’ ratings. Like previous approaches, we assume that there are groups of users and of items and that the rating a user gives an item is determined by their respective group memberships. However, we allow each user and each item to belong simultaneously to mixtures of different groups and, unlike many popular approaches such as matrix factorization, we do not assume that users in each group prefer a single group of items. In particular, we do not assume that ratings depend linearly on a measure of similarity, but allow probability distributions of ratings to depend freely on the user’s and item’s groups. The resulting overlapping groups and predicted ratings can be inferred with an expectation-maximization algorithm whose running time scales linearly with the number of observed ratings. Our approach enables us to predict user preferences in large datasets and is considerably more accurate than the current algorithms for such large datasets. PMID:27911773

MPS Editor

NASA Technical Reports Server (NTRS)

Mathews, William S.; Liu, Ning; Francis, Laurie K.; OReilly, Taifun L.; Schrock, Mitchell; Page, Dennis N.; Morris, John R.; Joswig, Joseph C.; Crockett, Thomas M.; Shams, Khawaja S.

2011-01-01

Previously, it was time-consuming to hand-edit data and then set up simulation runs to find the effect and impact of the input data on a spacecraft. MPS Editor provides the user the capability to create/edit/update models and sequences, and immediately try them out using what appears to the user as one piece of software. MPS Editor provides an integrated sequencing environment for users. It provides them with software that can be utilized during development as well as actual operations. In addition, it provides them with a single, consistent, user friendly interface. MPS Editor uses the Eclipse Rich Client Platform to provide an environment that can be tailored to specific missions. It provides the capability to create and edit, and includes an Activity Dictionary to build the simulation spacecraft models, build and edit sequences of commands, and model the effects of those commands on the spacecraft. MPS Editor is written in Java using the Eclipse Rich Client Platform. It is currently built with four perspectives: the Activity Dictionary Perspective, the Project Adaptation Perspective, the Sequence Building Perspective, and the Sequence Modeling Perspective. Each perspective performs a given task. If a mission doesn't require that task, the unneeded perspective is not added to that project's delivery. In the Activity Dictionary Perspective, the user builds the project-specific activities, observations, calibrations, etc. Typically, this is used during the development phases of the mission, although it can be used later to make changes and updates to the Project Activity Dictionary. In the Adaptation Perspective, the user creates the spacecraft models such as power, data store, etc. Again, this is typically used during development, but will be used to update or add models of the spacecraft. The Sequence Building Perspective allows the user to create a sequence of activities or commands that go to the spacecraft. It provides a simulation of the activities and commands that have been created.

Satellite Communication Hardware Emulation System (SCHES)

NASA Technical Reports Server (NTRS)

Kaplan, Ted

1993-01-01

Satellite Communication Hardware Emulator System (SCHES) is a powerful simulator that emulates the hardware used in TDRSS links. SCHES is a true bit-by-bit simulator that models communications hardware accurately enough to be used as a verification mechanism for actual hardware tests on user spacecraft. As a credit to its modular design, SCHES is easily configurable to model any user satellite communication link, though some development may be required to tailor existing software to user specific hardware.

Use of XML and Java for collaborative petroleum reservoir modeling on the Internet

NASA Astrophysics Data System (ADS)

Victorine, John; Watney, W. Lynn; Bhattacharya, Saibal

2005-11-01

The GEMINI (Geo-Engineering Modeling through INternet Informatics) is a public-domain, web-based freeware that is made up of an integrated suite of 14 Java-based software tools to accomplish on-line, real-time geologic and engineering reservoir modeling. GEMINI facilitates distant collaborations for small company and academic clients, negotiating analyses of both single and multiple wells. The system operates on a single server and an enterprise database. External data sets must be uploaded into this database. Feedback from GEMINI users provided the impetus to develop Stand Alone Web Start Applications of GEMINI modules that reside in and operate from the user's PC. In this version, the GEMINI modules run as applets, which may reside in local user PCs, on the server, or Java Web Start. In this enhanced version, XML-based data handling procedures are used to access data from remote and local databases and save results for later access and analyses. The XML data handling process also integrates different stand-alone GEMINI modules enabling the user(s) to access multiple databases. It provides flexibility to the user to customize analytical approach, database location, and level of collaboration. An example integrated field-study using GEMINI modules and Stand Alone Web Start Applications is provided to demonstrate the versatile applicability of this freeware for cost-effective reservoir modeling.

Use of XML and Java for collaborative petroleum reservoir modeling on the Internet

USGS Publications Warehouse

Victorine, J.; Watney, W.L.; Bhattacharya, S.

2005-01-01

The GEMINI (Geo-Engineering Modeling through INternet Informatics) is a public-domain, web-based freeware that is made up of an integrated suite of 14 Java-based software tools to accomplish on-line, real-time geologic and engineering reservoir modeling. GEMINI facilitates distant collaborations for small company and academic clients, negotiating analyses of both single and multiple wells. The system operates on a single server and an enterprise database. External data sets must be uploaded into this database. Feedback from GEMINI users provided the impetus to develop Stand Alone Web Start Applications of GEMINI modules that reside in and operate from the user's PC. In this version, the GEMINI modules run as applets, which may reside in local user PCs, on the server, or Java Web Start. In this enhanced version, XML-based data handling procedures are used to access data from remote and local databases and save results for later access and analyses. The XML data handling process also integrates different stand-alone GEMINI modules enabling the user(s) to access multiple databases. It provides flexibility to the user to customize analytical approach, database location, and level of collaboration. An example integrated field-study using GEMINI modules and Stand Alone Web Start Applications is provided to demonstrate the versatile applicability of this freeware for cost-effective reservoir modeling. ?? 2005 Elsevier Ltd. All rights reserved.

A framework for analyzing the cognitive complexity of computer-assisted clinical ordering.

PubMed

Horsky, Jan; Kaufman, David R; Oppenheim, Michael I; Patel, Vimla L

2003-01-01

Computer-assisted provider order entry is a technology that is designed to expedite medical ordering and to reduce the frequency of preventable errors. This paper presents a multifaceted cognitive methodology for the characterization of cognitive demands of a medical information system. Our investigation was informed by the distributed resources (DR) model, a novel approach designed to describe the dimensions of user interfaces that introduce unnecessary cognitive complexity. This method evaluates the relative distribution of external (system) and internal (user) representations embodied in system interaction. We conducted an expert walkthrough evaluation of a commercial order entry system, followed by a simulated clinical ordering task performed by seven clinicians. The DR model was employed to explain variation in user performance and to characterize the relationship of resource distribution and ordering errors. The analysis revealed that the configuration of resources in this ordering application placed unnecessarily heavy cognitive demands on the user, especially on those who lacked a robust conceptual model of the system. The resources model also provided some insight into clinicians' interactive strategies and patterns of associated errors. Implications for user training and interface design based on the principles of human-computer interaction in the medical domain are discussed.

Leveraging tagging and rating for recommendation: RMF meets weighted diffusion on tripartite graphs

NASA Astrophysics Data System (ADS)

Li, Jianguo; Tang, Yong; Chen, Jiemin

2017-10-01

Recommender systems (RSs) have been a widely exploited approach to solving the information overload problem. However, the performance is still limited due to the extreme sparsity of the rating data. With the popularity of Web 2.0, the social tagging system provides more external information to improve recommendation accuracy. Although some existing approaches combine the matrix factorization models with the tag co-occurrence and context of tags, they neglect the issue of tag sparsity that would also result in inaccurate recommendations. Consequently, in this paper, we propose a novel hybrid collaborative filtering model named WUDiff_RMF, which improves regularized matrix factorization (RMF) model by integrating Weighted User-Diffusion-based CF algorithm(WUDiff) that obtains the information of similar users from the weighted tripartite user-item-tag graph. This model aims to capture the degree correlation of the user-item-tag tripartite network to enhance the performance of recommendation. Experiments conducted on four real-world datasets demonstrate that our approach significantly performs better than already widely used methods in the accuracy of recommendation. Moreover, results show that WUDiff_RMF can alleviate the data sparsity, especially in the circumstance that users have made few ratings and few tags.

NEFP Decision Process: "A Computer Simulation for Planning School Finance Programs." User Manual.

ERIC Educational Resources Information Center

Boardman, Gerald R.; And Others

The National Educational Finance Project has developed a computerized model designed to simulate the consequences of alternative decisions in regard to the financing of public elementary and secondary education. This manual describes a users orientation to that model. The model was designed as an operational prototype for States to use in a…

Solid rocket booster performance evaluation model. Volume 2: Users manual

NASA Technical Reports Server (NTRS)

1974-01-01

This users manual for the solid rocket booster performance evaluation model (SRB-II) contains descriptions of the model, the program options, the required program inputs, the program output format and the program error messages. SRB-II is written in FORTRAN and is operational on both the IBM 370/155 and the MSFC UNIVAC 1108 computers.

Digital Avionics Information System (DAIS): Training Requirements Analysis Model Users Guide. Final Report.

ERIC Educational Resources Information Center

Czuchry, Andrew J.; And Others

This user's guide describes the functions, logical operations and subroutines, input data requirements, and available outputs of the Training Requirements Analysis Model (TRAMOD), a computerized analytical life cycle cost modeling system for use in the early stages of system design. Operable in a stand-alone mode, TRAMOD can be used for the…

User's Guide To CHEAP0 II-Economic Analysis of Stand Prognosis Model Outputs

Treesearch

Joseph E. Horn; E. Lee Medema; Ervin G. Schuster

1986-01-01

CHEAP0 II provides supplemental economic analysis capability for users of version 5.1 of the Stand Prognosis Model, including recent regeneration and insect outbreak extensions. Although patterned after the old CHEAP0 model, CHEAP0 II has more features and analytic capabilities, especially for analysis of existing and uneven-aged stands....

Introducing a new open source GIS user interface for the SWAT model

USDA-ARS?s Scientific Manuscript database

The Soil and Water Assessment Tool (SWAT) model is a robust watershed modelling tool. It typically uses the ArcSWAT interface to create its inputs. ArcSWAT is public domain software which works in the licensed ArcGIS environment. The aim of this paper was to develop an open source user interface ...

Modeling with Microcomputers.

ERIC Educational Resources Information Center

Litaker, R. Gregory

The applications of a recently developed computer program for microcomputers in developing models in an institutional research environment are considered. The VISICALC program requires no user programming skills, is available for all major brands of microcomputers, and provides for easy exchange of information between users of different computing…

Geodetic Strain Analysis Tool

NASA Technical Reports Server (NTRS)

Kedar, Sharon; Baxter, Sean C.; Parker, Jay W.; Webb, Frank H.; Owen, Susan E.; Sibthorpe, Anthony J.; Dong, Danan

2011-01-01

A geodetic software analysis tool enables the user to analyze 2D crustal strain from geodetic ground motion, and create models of crustal deformation using a graphical interface. Users can use any geodetic measurements of ground motion and derive the 2D crustal strain interactively. This software also provides a forward-modeling tool that calculates a geodetic velocity and strain field for a given fault model, and lets the user compare the modeled strain field with the strain field obtained from the user s data. Users may change parameters on-the-fly and obtain a real-time recalculation of the resulting strain field. Four data products are computed: maximum shear, dilatation, shear angle, and principal components. The current view and data dependencies are processed first. The remaining data products and views are then computed in a round-robin fashion to anticipate view changes. When an analysis or display parameter is changed, the affected data products and views are invalidated and progressively re-displayed as available. This software is designed to facilitate the derivation of the strain fields from the GPS and strain meter data that sample it to facilitate the understanding of the strengths and weaknesses of the strain field derivation from continuous GPS (CGPS) and other geodetic data from a variety of tectonic settings, to converge on the "best practices" strain derivation strategy for the Solid Earth Science ESDR System (SESES) project given the CGPS station distribution in the western U.S., and to provide SESES users with a scientific and educational tool to explore the strain field on their own with user-defined parameters.

Reasons For Physicians Not Adopting Clinical Decision Support Systems: Critical Analysis.

PubMed

Khairat, Saif; Marc, David; Crosby, William; Al Sanousi, Ali

2018-04-18

Clinical decision support systems (CDSSs) are an integral component of today's health information technologies. They assist with interpretation, diagnosis, and treatment. A CDSS can be embedded throughout the patient safety continuum providing reminders, recommendations, and alerts to health care providers. Although CDSSs have been shown to reduce medical errors and improve patient outcomes, they have fallen short of their full potential. User acceptance has been identified as one of the potential reasons for this shortfall. The purpose of this paper was to conduct a critical review and task analysis of CDSS research and to develop a new framework for CDSS design in order to achieve user acceptance. A critical review of CDSS papers was conducted with a focus on user acceptance. To gain a greater understanding of the problems associated with CDSS acceptance, we conducted a task analysis to identify and describe the goals, user input, system output, knowledge requirements, and constraints from two different perspectives: the machine (ie, the CDSS engine) and the user (ie, the physician). Favorability of CDSSs was based on user acceptance of clinical guidelines, reminders, alerts, and diagnostic suggestions. We propose two models: (1) the user acceptance and system adaptation design model, which includes optimizing CDSS design based on user needs/expectations, and (2) the input-process-output-engagemodel, which reveals to users the processes that govern CDSS outputs. This research demonstrates that the incorporation of the proposed models will improve user acceptance to support the beneficial effects of CDSSs adoption. Ultimately, if a user does not accept technology, this not only poses a threat to the use of the technology but can also pose a threat to the health and well-being of patients. ©Saif Khairat, David Marc, William Crosby, Ali Al Sanousi. Originally published in JMIR Medical Informatics (http://medinform.jmir.org), 18.04.2018.

Models Archive and ModelWeb at NSSDC

NASA Astrophysics Data System (ADS)

Bilitza, D.; Papitashvili, N.; King, J. H.

2002-05-01

In addition to its large data holdings, NASA's National Space Science Data Center (NSSDC) also maintains an archive of space physics models for public use (ftp://nssdcftp.gsfc.nasa.gov/models/). The more than 60 model entries cover a wide range of parameters from the atmosphere, to the ionosphere, to the magnetosphere, to the heliosphere. The models are primarily empirical models developed by the respective model authors based on long data records from ground and space experiments. An online model catalog (http://nssdc.gsfc.nasa.gov/space/model/) provides information about these and other models and links to the model software if available. We will briefly review the existing model holdings and highlight some of its usages and users. In response to a growing need by the user community, NSSDC began to develop web-interfaces for the most frequently requested models. These interfaces enable users to compute and plot model parameters online for the specific conditions that they are interested in. Currently included in the Modelweb system (http://nssdc.gsfc.nasa.gov/space/model/) are the following models: the International Reference Ionosphere (IRI) model, the Mass Spectrometer Incoherent Scatter (MSIS) E90 model, the International Geomagnetic Reference Field (IGRF) and the AP/AE-8 models for the radiation belt electrons and protons. User accesses to both systems have been steadily increasing over the last years with occasional spikes prior to large scientific meetings. The current monthly rate is between 5,000 to 10,000 accesses for either system; in February 2002 13,872 accesses were recorded to the Modelsweb and 7092 accesses to the models archive.

The Shrinkage Model And Expert System Of Plastic Lens Formation

NASA Astrophysics Data System (ADS)

Chang, Rong-Seng

1988-06-01

Shrinkage causes both the appearance & dimension defects of the injected plastic lens. We have built up a model of state equations with the help of finite element analysis program to estimate the volume change (shrinkage and swelling) under the combinations of injection variables such as pressure and temperature etc., then the personal computer expert system has been build up to make that knowledge conveniently available to the user in the model design, process planning, process operation and some other work. The domain knowledge is represented by a R-graph (Relationship-graph) model which states the relationships of variables & equations. This model could be compare with other models in the expert system. If the user has better model to solve the shrinkage problem, the program will evaluate it automatically and a learning file will be trigger by the expert system to teach the user to update their knowledge base and modify the old model by this better model. The Rubin's model and Gilmore's model have been input to the expert system. The conflict has been solved both from the user and the deeper knowledge base. A cube prism and the convex lens examples have been shown in this paper. This program is written by MULISP language in IBM PC-AT. The natural language provides English Explaination of know why and know how and the automatic English translation for the equation rules and the production rules.

Different time trends of caloric and fat intake between statin users and nonusers among US adults: gluttony in the time of statins?

PubMed

Sugiyama, Takehiro; Tsugawa, Yusuke; Tseng, Chi-Hong; Kobayashi, Yasuki; Shapiro, Martin F

2014-07-01

Both dietary modification and use of statins can lower blood cholesterol. The increase in caloric intake among the general population is reported to have plateaued in the last decade, but no study has examined the relationship between the time trends of caloric intake and statin use. To examine the difference in the temporal trends of caloric and fat intake between statin users and nonusers among US adults. A repeated cross-sectional study in a nationally representative sample of 27,886 US adults, 20 years or older, from the National Health and Nutrition Examination Survey, 1999 through 2010. Statin use. Caloric and fat intake measured through 24-hour dietary recall. Generalized linear models with interaction term between survey cycle and statin use were constructed to investigate the time trends of dietary intake for statin users and nonusers after adjustment for possible confounders. We calculated model-adjusted caloric and fat intake using these models and examined if the time trends differed by statin use. Body mass index (BMI) changes were also compared between statin users and nonusers. In the 1999-2000 period, the caloric intake was significantly less for statin users compared with nonusers (2000 vs 2179 kcal/d; P = .007). The difference between the groups became smaller as time went by, and there was no statistical difference after the 2005-2006 period. Among statin users, caloric intake in the 2009-2010 period was 9.6% higher (95% CI, 1.8-18.1; P = .02) than that in the 1999-2000 period. In contrast, no significant change was observed among nonusers during the same study period. Statin users also consumed significantly less fat in the 1999-2000 period (71.7 vs 81.2 g/d; P = .003). Fat intake increased 14.4% among statin users (95% CI, 3.8-26.1; P = .007) while not changing significantly among nonusers. Also, BMI increased more among statin users (+1.3) than among nonusers (+0.4) in the adjusted model (P = .02). Caloric and fat intake have increased among statin users over time, which was not true for nonusers. The increase in BMI was faster for statin users than for nonusers. Efforts aimed at dietary control among statin users may be becoming less intensive. The importance of dietary composition may need to be reemphasized for statin users.

Evaluation of a Digital Game-Based Learning Program for Enhancing Youth Mental Health: A Structural Equation Modeling of the Program Effectiveness.

PubMed

Huen, Jenny My; Lai, Eliza Sy; Shum, Angie Ky; So, Sam Wk; Chan, Melissa Ky; Wong, Paul Wc; Law, Y W; Yip, Paul Sf

2016-10-07

Digital game-based learning (DGBL) makes use of the entertaining power of digital games for educational purposes. Effectiveness assessment of DGBL programs has been underexplored and no attempt has been made to simultaneously model both important components of DGBL: learning attainment (ie, educational purposes of DGBL) and engagement of users (ie, entertaining power of DGBL) in evaluating program effectiveness. This study aimed to describe and evaluate an Internet-based DGBL program, Professor Gooley and the Flame of Mind, which promotes mental health to adolescents in a positive youth development approach. In particular, we investigated whether user engagement in the DGBL program could enhance their attainment on each of the learning constructs per DGBL module and subsequently enhance their mental health as measured by psychological well-being. Users were assessed on their attainment on each learning construct, psychological well-being, and engagement in each of the modules. One structural equation model was constructed for each DGBL module to model the effect of users' engagement and attainment on the learning construct on their psychological well-being. Of the 498 secondary school students that registered and participated from the first module of the DGBL program, 192 completed all 8 modules of the program. Results from structural equation modeling suggested that a higher extent of engagement in the program activities facilitated users' attainment on the learning constructs on most of the modules and in turn enhanced their psychological well-being after controlling for users' initial psychological well-being and initial attainment on the constructs. This study provided evidence that Internet intervention for mental health, implemented with the technologies and digital innovations of DGBL, could enhance youth mental health. Structural equation modeling is a promising approach in evaluating the effectiveness of DGBL programs.

Acceptance model of a Hospital Information System.

PubMed

Handayani, P W; Hidayanto, A N; Pinem, A A; Hapsari, I C; Sandhyaduhita, P I; Budi, I

2017-03-01

The purpose of this study is to develop a model of Hospital Information System (HIS) user acceptance focusing on human, technological, and organizational characteristics for supporting government eHealth programs. This model was then tested to see which hospital type in Indonesia would benefit from the model to resolve problems related to HIS user acceptance. This study used qualitative and quantitative approaches with case studies at four privately owned hospitals and three government-owned hospitals, which are general hospitals in Indonesia. The respondents involved in this study are low-level and mid-level hospital management officers, doctors, nurses, and administrative staff who work at medical record, inpatient, outpatient, emergency, pharmacy, and information technology units. Data was processed using Structural Equation Modeling (SEM) and AMOS 21.0. The study concludes that non-technological factors, such as human characteristics (i.e. compatibility, information security expectancy, and self-efficacy), and organizational characteristics (i.e. management support, facilitating conditions, and user involvement) which have level of significance of p<0.05, significantly influenced users' opinions of both the ease of use and the benefits of the HIS. This study found that different factors may affect the acceptance of each user in each type of hospital regarding the use of HIS. Finally, this model is best suited for government-owned hospitals. Based on the results of this study, hospital management and IT developers should have more understanding on the non-technological factors to better plan for HIS implementation. Support from management is critical to the sustainability of HIS implementation to ensure HIS is easy to use and provides benefits to the users as well as hospitals. Finally, this study could assist hospital management and IT developers, as well as researchers, to understand the obstacles faced by hospitals in implementing HIS. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

Dairy Analytics and Nutrient Analysis (DANA) Prototype System User Manual

DOE Office of Scientific and Technical Information (OSTI.GOV)

Sam Alessi; Dennis Keiser

2012-10-01

This document is a user manual for the Dairy Analytics and Nutrient Analysis (DANA) model. DANA provides an analysis of dairy anaerobic digestion technology and allows users to calculate biogas production, co-product valuation, capital costs, expenses, revenue and financial metrics, for user customizable scenarios, dairy and digester types. The model provides results for three anaerobic digester types; Covered Lagoons, Modified Plug Flow, and Complete Mix, and three main energy production technologies; electricity generation, renewable natural gas generation, and compressed natural gas generation. Additional options include different dairy types, bedding types, backend treatment type as well as numerous production, and economicmore » parameters. DANA’s goal is to extend the National Market Value of Anaerobic Digester Products analysis (informa economics, 2012; Innovation Center, 2011) to include a greater and more flexible set of regional digester scenarios and to provide a modular framework for creation of a tool to support farmer and investor needs. Users can set up scenarios from combinations of existing parameters or add new parameters, run the model and view a variety of reports, charts and tables that are automatically produced and delivered over the web interface. DANA is based in the INL’s analysis architecture entitled Generalized Environment for Modeling Systems (GEMS) , which offers extensive collaboration, analysis, and integration opportunities and greatly speeds the ability construct highly scalable web delivered user-oriented decision tools. DANA’s approach uses server-based data processing and web-based user interfaces, rather a client-based spreadsheet approach. This offers a number of benefits over the client-based approach. Server processing and storage can scale up to handle a very large number of scenarios, so that analysis of county, even field level, across the whole U.S., can be performed. Server based databases allow dairy and digester parameters be held and managed in a single managed data repository, while allows users to customize standard values and perform individual analysis. Server-based calculations can be easily extended, versions and upgrades managed, and any changes are immediately available to all users. This user manual describes how to use and/or modify input database tables, run DANA, view and modify reports.« less

An integrated user-friendly ArcMAP tool for bivariate statistical modeling in geoscience applications

NASA Astrophysics Data System (ADS)

Jebur, M. N.; Pradhan, B.; Shafri, H. Z. M.; Yusof, Z.; Tehrany, M. S.

2014-10-01

Modeling and classification difficulties are fundamental issues in natural hazard assessment. A geographic information system (GIS) is a domain that requires users to use various tools to perform different types of spatial modeling. Bivariate statistical analysis (BSA) assists in hazard modeling. To perform this analysis, several calculations are required and the user has to transfer data from one format to another. Most researchers perform these calculations manually by using Microsoft Excel or other programs. This process is time consuming and carries a degree of uncertainty. The lack of proper tools to implement BSA in a GIS environment prompted this study. In this paper, a user-friendly tool, BSM (bivariate statistical modeler), for BSA technique is proposed. Three popular BSA techniques such as frequency ratio, weights-of-evidence, and evidential belief function models are applied in the newly proposed ArcMAP tool. This tool is programmed in Python and is created by a simple graphical user interface, which facilitates the improvement of model performance. The proposed tool implements BSA automatically, thus allowing numerous variables to be examined. To validate the capability and accuracy of this program, a pilot test area in Malaysia is selected and all three models are tested by using the proposed program. Area under curve is used to measure the success rate and prediction rate. Results demonstrate that the proposed program executes BSA with reasonable accuracy. The proposed BSA tool can be used in numerous applications, such as natural hazard, mineral potential, hydrological, and other engineering and environmental applications.

An integrated user-friendly ArcMAP tool for bivariate statistical modelling in geoscience applications

NASA Astrophysics Data System (ADS)

Jebur, M. N.; Pradhan, B.; Shafri, H. Z. M.; Yusoff, Z. M.; Tehrany, M. S.

2015-03-01

Modelling and classification difficulties are fundamental issues in natural hazard assessment. A geographic information system (GIS) is a domain that requires users to use various tools to perform different types of spatial modelling. Bivariate statistical analysis (BSA) assists in hazard modelling. To perform this analysis, several calculations are required and the user has to transfer data from one format to another. Most researchers perform these calculations manually by using Microsoft Excel or other programs. This process is time-consuming and carries a degree of uncertainty. The lack of proper tools to implement BSA in a GIS environment prompted this study. In this paper, a user-friendly tool, bivariate statistical modeler (BSM), for BSA technique is proposed. Three popular BSA techniques, such as frequency ratio, weight-of-evidence (WoE), and evidential belief function (EBF) models, are applied in the newly proposed ArcMAP tool. This tool is programmed in Python and created by a simple graphical user interface (GUI), which facilitates the improvement of model performance. The proposed tool implements BSA automatically, thus allowing numerous variables to be examined. To validate the capability and accuracy of this program, a pilot test area in Malaysia is selected and all three models are tested by using the proposed program. Area under curve (AUC) is used to measure the success rate and prediction rate. Results demonstrate that the proposed program executes BSA with reasonable accuracy. The proposed BSA tool can be used in numerous applications, such as natural hazard, mineral potential, hydrological, and other engineering and environmental applications.

Product Recommendation System Based on Personal Preference Model Using CAM

NASA Astrophysics Data System (ADS)

Murakami, Tomoko; Yoshioka, Nobukazu; Orihara, Ryohei; Furukawa, Koichi

Product recommendation system is realized by applying business rules acquired by data maining techniques. Business rules such as demographical patterns of purchase, are able to cover the groups of users that have a tendency to purchase products, but it is difficult to recommend products adaptive to various personal preferences only by utilizing them. In addition to that, it is very costly to gather the large volume of high quality survey data, which is necessary for good recommendation based on personal preference model. A method collecting kansei information automatically without questionnaire survey is required. The constructing personal preference model from less favor data is also necessary, since it is costly for the user to input favor data. In this paper, we propose product recommendation system based on kansei information extracted by text mining and user's preference model constructed by Category-guided Adaptive Modeling, CAM for short. CAM is a feature construction method that can generate new features constructing the space where same labeled examples are close and different labeled examples are far away from some labeled examples. It is possible to construct personal preference model by CAM despite less information of likes and dislikes categories. In the system, retrieval agent gathers the products' specification and user agent manages preference model, user's likes and dislikes. Kansei information of the products is gained by applying text mining technique to the reputation documents about the products on the web site. We carry out some experimental studies to make sure that prefrence model obtained by our method performs effectively.

The GPRIME approach to finite element modeling

NASA Technical Reports Server (NTRS)

Wallace, D. R.; Mckee, J. H.; Hurwitz, M. M.

1983-01-01

GPRIME, an interactive modeling system, runs on the CDC 6000 computers and the DEC VAX 11/780 minicomputer. This system includes three components: (1) GPRIME, a user friendly geometric language and a processor to translate that language into geometric entities, (2) GGEN, an interactive data generator for 2-D models; and (3) SOLIDGEN, a 3-D solid modeling program. Each component has a computer user interface of an extensive command set. All of these programs make use of a comprehensive B-spline mathematics subroutine library, which can be used for a wide variety of interpolation problems and other geometric calculations. Many other user aids, such as automatic saving of the geometric and finite element data bases and hidden line removal, are available. This interactive finite element modeling capability can produce a complete finite element model, producing an output file of grid and element data.

SEIR Model of Rumor Spreading in Online Social Network with Varying Total Population Size

NASA Astrophysics Data System (ADS)

Dong, Suyalatu; Deng, Yan-Bin; Huang, Yong-Chang

2017-10-01

Based on the infectious disease model with disease latency, this paper proposes a new model for the rumor spreading process in online social network. In this paper what we establish an SEIR rumor spreading model to describe the online social network with varying total number of users and user deactivation rate. We calculate the exact equilibrium points and reproduction number for this model. Furthermore, we perform the rumor spreading process in the online social network with increasing population size based on the original real world Facebook network. The simulation results indicate that the SEIR model of rumor spreading in online social network with changing total number of users can accurately reveal the inherent characteristics of rumor spreading process in online social network. Supported by National Natural Science Foundation of China under Grant Nos. 11275017 and 11173028

Nonmarket economic user values of the Florida Keys/Key West

Treesearch

Vernon R. Leeworthy; J. Michael Bowker

1997-01-01

This report provides estimates of the nonmarket economic user values for recreating visitors to the Florida Keys/Key West that participated in natural resource-based activities. Results from estimated travel cost models are presented, including visitor’s responses to prices and estimated per person-trip user values. Annual user values are also calculated and presented...

C3 System Performance Simulation and User Manual. Getting Started: Guidelines for Users

NASA Technical Reports Server (NTRS)

2006-01-01

This document is a User's Manual describing the C3 Simulation capabilities. The subject work was designed to simulate the communications involved in the flight of a Remotely Operated Aircraft (ROA) using the Opnet software. Opnet provides a comprehensive development environment supporting the modeling of communication networks and distributed systems. It has tools for model design, simulation, data collection, and data analysis. Opnet models are hierarchical -- consisting of a project which contains node models which in turn contain process models. Nodes can be fixed, mobile, or satellite. Links between nodes can be physical or wireless. Communications are packet based. The model is very generic in its current form. Attributes such as frequency and bandwidth can easily be modified to better reflect a specific platform. The model is not fully developed at this stage -- there are still more enhancements to be added. Current issues are documented throughout this guide.

Updates to the Demographic and Spatial Allocation Models to ...

EPA Pesticide Factsheets

EPA's announced the availability of the final report, Updates to the Demographic and Spatial Allocation Models to Produce Integrated Climate and Land Use Scenarios (ICLUS) (Version 2). This update furthered land change modeling by providing nationwide housing development scenarios up to 2100. This newest version includes updated population and land use data sets and addresses limitations identified in ICLUS v1 in both the migration and spatial allocation models. The companion user guide (Final Report) describes the development of ICLUS v2 and the updates that were made to the original data sets and the demographic and spatial allocation models. The GIS tool enables users to run SERGoM with the population projections developed for the ICLUS project and allows users to modify the spatial allocation housing density across the landscape.

Use of complementary and alternative medicine among patients: classification criteria determine level of use.

PubMed

Kristoffersen, Agnete Egilsdatter; Fønnebø, Vinjar; Norheim, Arne Johan

2008-10-01

Self-reported use of complementary and alternative medicine (CAM) among patients varies widely between studies, possibly because the definition of a CAM user is not comparable. This makes it difficult to compare studies. The aim of this study is to present a six-level model for classifying patients' reported exposure to CAM. Prayer, physical exercise, special diets, over-the-counter products/CAM techniques, and personal visits to a CAM practitioner are successively removed from the model in a reductive fashion. By applying the model to responses given by Norwegian patients with cancer, we found that 72% use CAM if the user was defined to include all types of CAM. This proportion was reduced successively to only 11% in the same patient group when a CAM user was defined as a user visiting a CAM practitioner four or more times. When considering a sample of 10 recently published studies of CAM use among patients with breast cancer, we found 98% use when the CAM user was defined to include all sorts of CAM. This proportion was reduced successively to only 20% when a CAM user was defined as a user of a CAM practitioner. We recommend future surveys of CAM use to report at more than one level and to clarify which intensity level of CAM use the report is based on.

Organizational Strategies for End-User Computing Support.

ERIC Educational Resources Information Center

Blackmun, Robert R.; And Others

1988-01-01

Effective support for end users of computers has been an important issue in higher education from the first applications of general purpose mainframe computers through minicomputers, microcomputers, and supercomputers. The development of end user support is reviewed and organizational models are examined. (Author/MLW)

Network-based modeling and intelligent data mining of social media for improving care.

PubMed

Akay, Altug; Dragomir, Andrei; Erlandsson, Bjorn-Erik

2015-01-01

Intelligently extracting knowledge from social media has recently attracted great interest from the Biomedical and Health Informatics community to simultaneously improve healthcare outcomes and reduce costs using consumer-generated opinion. We propose a two-step analysis framework that focuses on positive and negative sentiment, as well as the side effects of treatment, in users' forum posts, and identifies user communities (modules) and influential users for the purpose of ascertaining user opinion of cancer treatment. We used a self-organizing map to analyze word frequency data derived from users' forum posts. We then introduced a novel network-based approach for modeling users' forum interactions and employed a network partitioning method based on optimizing a stability quality measure. This allowed us to determine consumer opinion and identify influential users within the retrieved modules using information derived from both word-frequency data and network-based properties. Our approach can expand research into intelligently mining social media data for consumer opinion of various treatments to provide rapid, up-to-date information for the pharmaceutical industry, hospitals, and medical staff, on the effectiveness (or ineffectiveness) of future treatments.

Modeling web-based information seeking by users who are blind.

PubMed

Brunsman-Johnson, Carissa; Narayanan, Sundaram; Shebilske, Wayne; Alakke, Ganesh; Narakesari, Shruti

2011-01-01

This article describes website information seeking strategies used by users who are blind and compares those with sighted users. It outlines how assistive technologies and website design can aid users who are blind while information seeking. People who are blind and sighted are tested using an assessment tool and performing several tasks on websites. The times and keystrokes are recorded for all tasks as well as commands used and spatial questioning. Participants who are blind used keyword-based search strategies as their primary tool to seek information. Sighted users also used keyword search techniques if they were unable to find the information using a visual scan of the home page of a website. A proposed model based on the present study for information seeking is described. Keywords are important in the strategies used by both groups of participants and providing these common and consistent keywords in locations that are accessible to the users may be useful for efficient information searching. The observations suggest that there may be a difference in how users search a website that is familiar compared to one that is unfamiliar. © 2011 Informa UK, Ltd.

Extended parametric representation of compressor fans and turbines. Volume 2: Part user's manual (parametric turbine)

NASA Technical Reports Server (NTRS)

Coverse, G. L.

1984-01-01

A turbine modeling technique has been developed which will enable the user to obtain consistent and rapid off-design performance from design point input. This technique is applicable to both axial and radial flow turbine with flow sizes ranging from about one pound per second to several hundred pounds per second. The axial flow turbines may or may not include variable geometry in the first stage nozzle. A user-specified option will also permit the calculation of design point cooling flow levels and corresponding changes in efficiency for the axial flow turbines. The modeling technique has been incorporated into a time-sharing program in order to facilitate its use. Because this report contains a description of the input output data, values of typical inputs, and example cases, it is suitable as a user's manual. This report is the second of a three volume set. The titles of the three volumes are as follows: (1) Volume 1 CMGEN USER's Manual (Parametric Compressor Generator); (2) Volume 2 PART USER's Manual (Parametric Turbine); (3) Volume 3 MODFAN USER's Manual (Parametric Modulation Flow Fan).

Exploring User Acceptance of FOSS: The Role of the Age of the Users

NASA Astrophysics Data System (ADS)

Gallego, M. Dolores; Bueno, Salvador

Free and open source software (FOSS) movement essentially arises like answer to the evolution occurred in the market from the software, characterized by the closing of the source code. Furthermore, some FOSS characteristics, such as (1) the advance of this movement and (2) the attractiveness that contributes the voluntary and cooperative work, have increased the interest of the users towards free software. Traditionally, research in FOSS has focused on identifying individual personal motives for participating in the development of a FOSS project, analyzing specific FOSS solutions, or the FOSS movement itself. Nevertheless, the advantages of the FOSS for users and the effect of the demographic dimensions on user acceptance for FOSS have been two research topics with little attention. Specifically, this paper's aim is to focus on the influence of the userś age with FOSS the FOSS acceptance. Based on the literature, userś age is an essential demographic dimension for explaining the Information Systems acceptance. With this purpose, the authors have developed a research model based on the Technological Acceptance Model (TAM).

Implementing Model-Check for Employee and Management Satisfaction

NASA Technical Reports Server (NTRS)

Jones, Corey; LaPha, Steven

2013-01-01

This presentation will discuss methods to which ModelCheck can be implemented to not only improve model quality, but also satisfy both employees and management through different sets of quality checks. This approach allows a standard set of modeling practices to be upheld throughout a company, with minimal interaction required by the end user. The presenter will demonstrate how to create multiple ModelCheck standards, preventing users from evading the system, and how it can improve the quality of drawings and models.

User's manual for LINEAR, a FORTRAN program to derive linear aircraft models

NASA Technical Reports Server (NTRS)

Duke, Eugene L.; Patterson, Brian P.; Antoniewicz, Robert F.

1987-01-01

This report documents a FORTRAN program that provides a powerful and flexible tool for the linearization of aircraft models. The program LINEAR numerically determines a linear system model using nonlinear equations of motion and a user-supplied nonlinear aerodynamic model. The system model determined by LINEAR consists of matrices for both state and observation equations. The program has been designed to allow easy selection and definition of the state, control, and observation variables to be used in a particular model.

Modeling open-set spoken word recognition in postlingually deafened adults after cochlear implantation: some preliminary results with the neighborhood activation model.

PubMed

Meyer, Ted A; Frisch, Stefan A; Pisoni, David B; Miyamoto, Richard T; Svirsky, Mario A

2003-07-01

Do cochlear implants provide enough information to allow adult cochlear implant users to understand words in ways that are similar to listeners with acoustic hearing? Can we use a computational model to gain insight into the underlying mechanisms used by cochlear implant users to recognize spoken words? The Neighborhood Activation Model has been shown to be a reasonable model of word recognition for listeners with normal hearing. The Neighborhood Activation Model assumes that words are recognized in relation to other similar-sounding words in a listener's lexicon. The probability of correctly identifying a word is based on the phoneme perception probabilities from a listener's closed-set consonant and vowel confusion matrices modified by the relative frequency of occurrence of the target word compared with similar-sounding words (neighbors). Common words with few similar-sounding neighbors are more likely to be selected as responses than less common words with many similar-sounding neighbors. Recent studies have shown that several of the assumptions of the Neighborhood Activation Model also hold true for cochlear implant users. Closed-set consonant and vowel confusion matrices were obtained from 26 postlingually deafened adults who use cochlear implants. Confusion matrices were used to represent input errors to the Neighborhood Activation Model. Responses to the different stimuli were then generated by the Neighborhood Activation Model after incorporating the frequency of occurrence counts of the stimuli and their neighbors. Model outputs were compared with obtained performance measures on the Consonant-Vowel Nucleus-Consonant word test. Information transmission analysis was used to assess whether the Neighborhood Activation Model was able to successfully generate and predict word and individual phoneme recognition by cochlear implant users. The Neighborhood Activation Model predicted Consonant-Vowel Nucleus-Consonant test words at levels similar to those correctly identified by the cochlear implant users. The Neighborhood Activation Model also predicted phoneme feature information well. The results obtained suggest that the Neighborhood Activation Model provides a reasonable explanation of word recognition by postlingually deafened adults after cochlear implantation. It appears that multichannel cochlear implants give cochlear implant users access to their mental lexicons in a manner that is similar to listeners with acoustic hearing. The lexical properties of the test stimuli used to assess performance are important to spoken-word recognition and should be included in further models of the word recognition process.

Marijuana use trajectories and academic outcomes among college students.

PubMed

Suerken, Cynthia K; Reboussin, Beth A; Egan, Kathleen L; Sutfin, Erin L; Wagoner, Kimberly G; Spangler, John; Wolfson, Mark

2016-05-01

Marijuana is the most commonly used illicit drug by college students. Prior studies have established an association between marijuana use and poor academic performance in college, but research on the frequency of marijuana use over the entire college career is limited. The study objective was to examine the association of marijuana use trajectories on academic outcomes, including senior year enrollment, plans to graduate on time, and GPA. Data were collected from a cohort of 3146 students from 11 colleges in North Carolina and Virginia at six time points across the college career. Group-based trajectory models were used to characterize longitudinal marijuana use patterns during college. Associations between marijuana trajectory groups and academic outcomes were modeled using random-effects linear and logistic regressions. Five marijuana trajectory groups were identified: non-users (69.0%), infrequent users (16.6%), decreasing users (4.7%), increasing users (5.8%), and frequent users (3.9%). Decreasing users and frequent users were more likely to drop out of college and plan to delay graduation when compared to non-users. All marijuana user groups reported lower GPAs, on average, than non-users. These results identify marijuana use patterns that put students at risk for poor academic performance in college. Students who use marijuana frequently at the beginning of the college career are especially at risk for lower academic achievement than non-users, suggesting that early intervention is critical. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

TargetVue: Visual Analysis of Anomalous User Behaviors in Online Communication Systems.

PubMed

Cao, Nan; Shi, Conglei; Lin, Sabrina; Lu, Jie; Lin, Yu-Ru; Lin, Ching-Yung

2016-01-01

Users with anomalous behaviors in online communication systems (e.g. email and social medial platforms) are potential threats to society. Automated anomaly detection based on advanced machine learning techniques has been developed to combat this issue; challenges remain, though, due to the difficulty of obtaining proper ground truth for model training and evaluation. Therefore, substantial human judgment on the automated analysis results is often required to better adjust the performance of anomaly detection. Unfortunately, techniques that allow users to understand the analysis results more efficiently, to make a confident judgment about anomalies, and to explore data in their context, are still lacking. In this paper, we propose a novel visual analysis system, TargetVue, which detects anomalous users via an unsupervised learning model and visualizes the behaviors of suspicious users in behavior-rich context through novel visualization designs and multiple coordinated contextual views. Particularly, TargetVue incorporates three new ego-centric glyphs to visually summarize a user's behaviors which effectively present the user's communication activities, features, and social interactions. An efficient layout method is proposed to place these glyphs on a triangle grid, which captures similarities among users and facilitates comparisons of behaviors of different users. We demonstrate the power of TargetVue through its application in a social bot detection challenge using Twitter data, a case study based on email records, and an interview with expert users. Our evaluation shows that TargetVue is beneficial to the detection of users with anomalous communication behaviors.

User's guide to the stand-damage model: a component of the gypsy moth life system model

Treesearch

J. J. Colbert; George Racin

1995-01-01

The Stand-Damage Model (a component of the Gypsy Moth Life System Model) simulates the growth of a mixed hardwood forest and incorporates the effects of defoliation by gypsy moth or tree harvesting as prescribed by the user. It can be used to assess the damage from expected defoliation, view the differences between various degrees of defoliation, and describe the...

Conceptual Modeling via Logic Programming

DTIC Science & Technology

1990-01-01

Define User Interface and Query Language L i1W= Ltl k.l 4. Define Procedures for Specifying Output S . Select Logic Programming Language 6. Develop ...baseline s change model. sessions and baselines. It was changed 6. Develop Methodology for C 31 Users. considerably with the advent of the window This...Model Development : Implica- for Conceptual Modeling Via Logic tions for Communications of a Cognitive Programming. Marina del Rey, Calif.: Analysis of

3DFATMIC: THREE DIMENSIONAL SUBSURFACE FLOW, FATE AND TRANSPORT OF MICROBES AND CHEMICALS MODEL - USER'S MANUAL VERSION 1.0

EPA Science Inventory

This document is the user's manual of 3DFATMIC, a 3-Dimensional Subsurface Flow, Fate and Transport of Microbes and Chemicals Model using a Lagrangian-Eulerian adapted zooming and peak capturing (LEZOOMPC) algorithm.