The Youth-Nominated Support Team-Version II for Suicidal Adolescents: A Randomized Controlled Intervention Trial

ERIC Educational Resources Information Center

King, Cheryl A.; Klaus, Nicole; Kramer, Anne; Venkataraman, Sanjeev; Quinlan, Paul; Gillespie, Brenda

2009-01-01

The purpose of this study was to examine the efficacy of the Youth-Nominated Support Team-Version II (YST-II) for suicidal adolescents, an intervention based on social support and health behavior models, which was designed to supplement standard treatments. Psychiatrically hospitalized and suicidal adolescents, 13-17 years of age, were randomly…

Aircraft/Air Traffic Management Functional Analysis Model: Technical Description. 2.0

NASA Technical Reports Server (NTRS)

Etheridge, Melvin; Plugge, Joana; Retina, Nusrat

1998-01-01

The Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 (FAM 2.0), is a discrete event simulation model designed to support analysis of alternative concepts in air traffic management and control. FAM 2.0 was developed by the Logistics Management Institute (LMI) under a National Aeronautics and Space Administration (NASA) contract. This document provides a technical description of FAM 2.0 and its computer files to enable the modeler and programmer to make enhancements or modifications to the model. Those interested in a guide for using the model in analysis should consult the companion document, Aircraft/Air Traffic Management Functional Analysis Model, Version 2.0 Users Manual.

Computer-Aided System Engineering and Analysis (CASE/A) Programmer's Manual, Version 5.0

NASA Technical Reports Server (NTRS)

Knox, J. C.

1996-01-01

The Computer Aided System Engineering and Analysis (CASE/A) Version 5.0 Programmer's Manual provides the programmer and user with information regarding the internal structure of the CASE/A 5.0 software system. CASE/A 5.0 is a trade study tool that provides modeling/simulation capabilities for analyzing environmental control and life support systems and active thermal control systems. CASE/A has been successfully used in studies such as the evaluation of carbon dioxide removal in the space station. CASE/A modeling provides a graphical and command-driven interface for the user. This interface allows the user to construct a model by placing equipment components in a graphical layout of the system hardware, then connect the components via flow streams and define their operating parameters. Once the equipment is placed, the simulation time and other control parameters can be set to run the simulation based on the model constructed. After completion of the simulation, graphical plots or text files can be obtained for evaluation of the simulation results over time. Additionally, users have the capability to control the simulation and extract information at various times in the simulation (e.g., control equipment operating parameters over the simulation time or extract plot data) by using "User Operations (OPS) Code." This OPS code is written in FORTRAN with a canned set of utility subroutines for performing common tasks. CASE/A version 5.0 software runs under the VAX VMS(Trademark) environment. It utilizes the Tektronics 4014(Trademark) graphics display system and the VTIOO(Trademark) text manipulation/display system.

An update to the Surface Ocean CO2 Atlas (SOCAT version 2)

NASA Astrophysics Data System (ADS)

Bakker, D. C. E.; Pfeil, B.; Smith, K.; Hankin, S.; Olsen, A.; Alin, S. R.; Cosca, C.; Harasawa, S.; Kozyr, A.; Nojiri, Y.; O'Brien, K. M.; Schuster, U.; Telszewski, M.; Tilbrook, B.; Wada, C.; Akl, J.; Barbero, L.; Bates, N. R.; Boutin, J.; Bozec, Y.; Cai, W.-J.; Castle, R. D.; Chavez, F. P.; Chen, L.; Chierici, M.; Currie, K.; de Baar, H. J. W.; Evans, W.; Feely, R. A.; Fransson, A.; Gao, Z.; Hales, B.; Hardman-Mountford, N. J.; Hoppema, M.; Huang, W.-J.; Hunt, C. W.; Huss, B.; Ichikawa, T.; Johannessen, T.; Jones, E. M.; Jones, S. D.; Jutterström, S.; Kitidis, V.; Körtzinger, A.; Landschützer, P.; Lauvset, S. K.; Lefèvre, N.; Manke, A. B.; Mathis, J. T.; Merlivat, L.; Metzl, N.; Murata, A.; Newberger, T.; Omar, A. M.; Ono, T.; Park, G.-H.; Paterson, K.; Pierrot, D.; Ríos, A. F.; Sabine, C. L.; Saito, S.; Salisbury, J.; Sarma, V. V. S. S.; Schlitzer, R.; Sieger, R.; Skjelvan, I.; Steinhoff, T.; Sullivan, K. F.; Sun, H.; Sutton, A. J.; Suzuki, T.; Sweeney, C.; Takahashi, T.; Tjiputra, J.; Tsurushima, N.; van Heuven, S. M. A. C.; Vandemark, D.; Vlahos, P.; Wallace, D. W. R.; Wanninkhof, R.; Watson, A. J.

2014-03-01

The Surface Ocean CO2 Atlas (SOCAT), an activity of the international marine carbon research community, provides access to synthesis and gridded fCO2 (fugacity of carbon dioxide) products for the surface oceans. Version 2 of SOCAT is an update of the previous release (version 1) with more data (increased from 6.3 million to 10.1 million surface water fCO2 values) and extended data coverage (from 1968-2007 to 1968-2011). The quality control criteria, while identical in both versions, have been applied more strictly in version 2 than in version 1. The SOCAT website (http://www.socat.info/) has links to quality control comments, metadata, individual data set files, and synthesis and gridded data products. Interactive online tools allow visitors to explore the richness of the data. Applications of SOCAT include process studies, quantification of the ocean carbon sink and its spatial, seasonal, year-to-year and longerterm variation, as well as initialisation or validation of ocean carbon models and coupled climate-carbon models. Data coverage Repository-References: Individual data set files and synthesis product: doi:10.1594/PANGAEA.811776 Gridded products: doi:10.3334/CDIAC/OTG.SOCAT_V2_GRID Available at: http://www.socat.info/ Coverage: 79° S to 90° N; 180° W to 180° E Location Name: Global Oceans and Coastal Seas Date/Time Start: 16 November 1968 ate/Time End: 26 December 2011

Assimilation of Quality Controlled AIRS Temperature Profiles using the NCEP GFS

NASA Technical Reports Server (NTRS)

Susskind, Joel; Reale, Oreste; Iredell, Lena; Rosenberg, Robert

2013-01-01

We have previously conducted a number of data assimilation experiments using AIRS Version-5 quality controlled temperature profiles as a step toward finding an optimum balance of spatial coverage and sounding accuracy with regard to improving forecast skill. The data assimilation and forecast system we used was the Goddard Earth Observing System Model , Version-5 (GEOS-5) Data Assimilation System (DAS), which represents a combination of the NASA GEOS-5 forecast model with the National Centers for Environmental Prediction (NCEP) operational Grid Point Statistical Interpolation (GSI) global analysis scheme. All analyses and forecasts were run at a 0.5deg x 0.625deg spatial resolution. Data assimilation experiments were conducted in four different seasons, each in a different year. Three different sets of data assimilation experiments were run during each time period: Control; AIRS T(p); and AIRS Radiance. In the "Control" analysis, all the data used operationally by NCEP was assimilated, but no AIRS data was assimilated. Radiances from the Aqua AMSU-A instrument were also assimilated operationally by NCEP and are included in the "Control". The AIRS Radiance assimilation adds AIRS observed radiance observations for a select set of channels to the data set being assimilated, as done operationally by NCEP. In the AIRS T(p) assimilation, all information used in the Control was assimilated as well as Quality Controlled AIRS Version-5 temperature profiles, i.e., AIRS T(p) information was substituted for AIRS radiance information. The AIRS Version-5 temperature profiles were presented to the GSI analysis as rawinsonde profiles, assimilated down to a case-by-case appropriate pressure level p(sub best) determined using the Quality Control procedure. Version-5 also determines case-by-case, level-by-level error estimates of the temperature profiles, which were used as the uncertainty of each temperature measurement. These experiments using GEOS-5 have shown that forecasts resulting from analyses using the AIRS T(p) assimilation system were superior to those from the Radiance assimilation system, both with regard to global 7 day forecast skill and also the ability to predict storm tracks and intensity.

Optics Program Modified for Multithreaded Parallel Computing

NASA Technical Reports Server (NTRS)

Lou, John; Bedding, Dave; Basinger, Scott

2006-01-01

A powerful high-performance computer program for simulating and analyzing adaptive and controlled optical systems has been developed by modifying the serial version of the Modeling and Analysis for Controlled Optical Systems (MACOS) program to impart capabilities for multithreaded parallel processing on computing systems ranging from supercomputers down to Symmetric Multiprocessing (SMP) personal computers. The modifications included the incorporation of OpenMP, a portable and widely supported application interface software, that can be used to explicitly add multithreaded parallelism to an application program under a shared-memory programming model. OpenMP was applied to parallelize ray-tracing calculations, one of the major computing components in MACOS. Multithreading is also used in the diffraction propagation of light in MACOS based on pthreads [POSIX Thread, (where "POSIX" signifies a portable operating system for UNIX)]. In tests of the parallelized version of MACOS, the speedup in ray-tracing calculations was found to be linear, or proportional to the number of processors, while the speedup in diffraction calculations ranged from 50 to 60 percent, depending on the type and number of processors. The parallelized version of MACOS is portable, and, to the user, its interface is basically the same as that of the original serial version of MACOS.

INTEGRATED AIR POLLUTION CONTROL SYSTEM, VERSION 4.0 - VOLUME 1: USER'S GUIDE

EPA Science Inventory

The Integrated Air Pollution Control System (IAPCS) was developed for the U.S. EPA's Air and Energy Engineering Research Laboratory to estimate costs and performance for emission control systems applied to coal-fired utility boilers. The model can project a material balance, and ...

Experimental investigation of elastic mode control on a model of a transport aircraft

NASA Technical Reports Server (NTRS)

Abramovitz, M.; Heimbaugh, R. M.; Nomura, J. K.; Pearson, R. M.; Shirley, W. A.; Stringham, R. H.; Tescher, E. L.; Zoock, I. E.

1981-01-01

A 4.5 percent DC-10 derivative flexible model with active controls is fabricated, developed, and tested to investigate the ability to suppress flutter and reduce gust loads with active controlled surfaces. The model is analyzed and tested in both semispan and complete model configuration. Analytical methods are refined and control laws are developed and successfully tested on both versions of the model. A 15 to 25 percent increase in flutter speed due to the active system is demonstrated. The capability of an active control system to significantly reduce wing bending moments due to turbulence is demonstrated. Good correlation is obtained between test and analytical prediction.

ORACLS- OPTIMAL REGULATOR ALGORITHMS FOR THE CONTROL OF LINEAR SYSTEMS (CDC VERSION)

NASA Technical Reports Server (NTRS)

Armstrong, E. S.

1994-01-01

This control theory design package, called Optimal Regulator Algorithms for the Control of Linear Systems (ORACLS), was developed to aid in the design of controllers and optimal filters for systems which can be modeled by linear, time-invariant differential and difference equations. Optimal linear quadratic regulator theory, currently referred to as the Linear-Quadratic-Gaussian (LQG) problem, has become the most widely accepted method of determining optimal control policy. Within this theory, the infinite duration time-invariant problems, which lead to constant gain feedback control laws and constant Kalman-Bucy filter gains for reconstruction of the system state, exhibit high tractability and potential ease of implementation. A variety of new and efficient methods in the field of numerical linear algebra have been combined into the ORACLS program, which provides for the solution to time-invariant continuous or discrete LQG problems. The ORACLS package is particularly attractive to the control system designer because it provides a rigorous tool for dealing with multi-input and multi-output dynamic systems in both continuous and discrete form. The ORACLS programming system is a collection of subroutines which can be used to formulate, manipulate, and solve various LQG design problems. The ORACLS program is constructed in a manner which permits the user to maintain considerable flexibility at each operational state. This flexibility is accomplished by providing primary operations, analysis of linear time-invariant systems, and control synthesis based on LQG methodology. The input-output routines handle the reading and writing of numerical matrices, printing heading information, and accumulating output information. The basic vector-matrix operations include addition, subtraction, multiplication, equation, norm construction, tracing, transposition, scaling, juxtaposition, and construction of null and identity matrices. The analysis routines provide for the following computations: the eigenvalues and eigenvectors of real matrices; the relative stability of a given matrix; matrix factorization; the solution of linear constant coefficient vector-matrix algebraic equations; the controllability properties of a linear time-invariant system; the steady-state covariance matrix of an open-loop stable system forced by white noise; and the transient response of continuous linear time-invariant systems. The control law design routines of ORACLS implement some of the more common techniques of time-invariant LQG methodology. For the finite-duration optimal linear regulator problem with noise-free measurements, continuous dynamics, and integral performance index, a routine is provided which implements the negative exponential method for finding both the transient and steady-state solutions to the matrix Riccati equation. For the discrete version of this problem, the method of backwards differencing is applied to find the solutions to the discrete Riccati equation. A routine is also included to solve the steady-state Riccati equation by the Newton algorithms described by Klein, for continuous problems, and by Hewer, for discrete problems. Another routine calculates the prefilter gain to eliminate control state cross-product terms in the quadratic performance index and the weighting matrices for the sampled data optimal linear regulator problem. For cases with measurement noise, duality theory and optimal regulator algorithms are used to calculate solutions to the continuous and discrete Kalman-Bucy filter problems. Finally, routines are included to implement the continuous and discrete forms of the explicit (model-in-the-system) and implicit (model-in-the-performance-index) model following theory. These routines generate linear control laws which cause the output of a dynamic time-invariant system to track the output of a prescribed model. In order to apply ORACLS, the user must write an executive (driver) program which inputs the problem coefficients, formulates and selects the routines to be used to solve the problem, and specifies the desired output. There are three versions of ORACLS source code available for implementation: CDC, IBM, and DEC. The CDC version has been implemented on a CDC 6000 series computer with a central memory of approximately 13K (octal) of 60 bit words. The CDC version is written in FORTRAN IV, was developed in 1978, and last updated in 1989. The IBM version has been implemented on an IBM 370 series computer with a central memory requirement of approximately 300K of 8 bit bytes. The IBM version is written in FORTRAN IV and was generated in 1981. The DEC version has been implemented on a VAX series computer operating under VMS. The VAX version is written in FORTRAN 77 and was generated in 1986.

ORACLS- OPTIMAL REGULATOR ALGORITHMS FOR THE CONTROL OF LINEAR SYSTEMS (DEC VAX VERSION)

NASA Technical Reports Server (NTRS)

Frisch, H.

1994-01-01

This control theory design package, called Optimal Regulator Algorithms for the Control of Linear Systems (ORACLS), was developed to aid in the design of controllers and optimal filters for systems which can be modeled by linear, time-invariant differential and difference equations. Optimal linear quadratic regulator theory, currently referred to as the Linear-Quadratic-Gaussian (LQG) problem, has become the most widely accepted method of determining optimal control policy. Within this theory, the infinite duration time-invariant problems, which lead to constant gain feedback control laws and constant Kalman-Bucy filter gains for reconstruction of the system state, exhibit high tractability and potential ease of implementation. A variety of new and efficient methods in the field of numerical linear algebra have been combined into the ORACLS program, which provides for the solution to time-invariant continuous or discrete LQG problems. The ORACLS package is particularly attractive to the control system designer because it provides a rigorous tool for dealing with multi-input and multi-output dynamic systems in both continuous and discrete form. The ORACLS programming system is a collection of subroutines which can be used to formulate, manipulate, and solve various LQG design problems. The ORACLS program is constructed in a manner which permits the user to maintain considerable flexibility at each operational state. This flexibility is accomplished by providing primary operations, analysis of linear time-invariant systems, and control synthesis based on LQG methodology. The input-output routines handle the reading and writing of numerical matrices, printing heading information, and accumulating output information. The basic vector-matrix operations include addition, subtraction, multiplication, equation, norm construction, tracing, transposition, scaling, juxtaposition, and construction of null and identity matrices. The analysis routines provide for the following computations: the eigenvalues and eigenvectors of real matrices; the relative stability of a given matrix; matrix factorization; the solution of linear constant coefficient vector-matrix algebraic equations; the controllability properties of a linear time-invariant system; the steady-state covariance matrix of an open-loop stable system forced by white noise; and the transient response of continuous linear time-invariant systems. The control law design routines of ORACLS implement some of the more common techniques of time-invariant LQG methodology. For the finite-duration optimal linear regulator problem with noise-free measurements, continuous dynamics, and integral performance index, a routine is provided which implements the negative exponential method for finding both the transient and steady-state solutions to the matrix Riccati equation. For the discrete version of this problem, the method of backwards differencing is applied to find the solutions to the discrete Riccati equation. A routine is also included to solve the steady-state Riccati equation by the Newton algorithms described by Klein, for continuous problems, and by Hewer, for discrete problems. Another routine calculates the prefilter gain to eliminate control state cross-product terms in the quadratic performance index and the weighting matrices for the sampled data optimal linear regulator problem. For cases with measurement noise, duality theory and optimal regulator algorithms are used to calculate solutions to the continuous and discrete Kalman-Bucy filter problems. Finally, routines are included to implement the continuous and discrete forms of the explicit (model-in-the-system) and implicit (model-in-the-performance-index) model following theory. These routines generate linear control laws which cause the output of a dynamic time-invariant system to track the output of a prescribed model. In order to apply ORACLS, the user must write an executive (driver) program which inputs the problem coefficients, formulates and selects the routines to be used to solve the problem, and specifies the desired output. There are three versions of ORACLS source code available for implementation: CDC, IBM, and DEC. The CDC version has been implemented on a CDC 6000 series computer with a central memory of approximately 13K (octal) of 60 bit words. The CDC version is written in FORTRAN IV, was developed in 1978, and last updated in 1986. The IBM version has been implemented on an IBM 370 series computer with a central memory requirement of approximately 300K of 8 bit bytes. The IBM version is written in FORTRAN IV and was generated in 1981. The DEC version has been implemented on a VAX series computer operating under VMS. The VAX version is written in FORTRAN 77 and was generated in 1986.

Revision history aware repositories of computational models of biological systems.

PubMed

Miller, Andrew K; Yu, Tommy; Britten, Randall; Cooling, Mike T; Lawson, James; Cowan, Dougal; Garny, Alan; Halstead, Matt D B; Hunter, Peter J; Nickerson, David P; Nunns, Geo; Wimalaratne, Sarala M; Nielsen, Poul M F

2011-01-14

Building repositories of computational models of biological systems ensures that published models are available for both education and further research, and can provide a source of smaller, previously verified models to integrate into a larger model. One problem with earlier repositories has been the limitations in facilities to record the revision history of models. Often, these facilities are limited to a linear series of versions which were deposited in the repository. This is problematic for several reasons. Firstly, there are many instances in the history of biological systems modelling where an 'ancestral' model is modified by different groups to create many different models. With a linear series of versions, if the changes made to one model are merged into another model, the merge appears as a single item in the history. This hides useful revision history information, and also makes further merges much more difficult, as there is no record of which changes have or have not already been merged. In addition, a long series of individual changes made outside of the repository are also all merged into a single revision when they are put back into the repository, making it difficult to separate out individual changes. Furthermore, many earlier repositories only retain the revision history of individual files, rather than of a group of files. This is an important limitation to overcome, because some types of models, such as CellML 1.1 models, can be developed as a collection of modules, each in a separate file. The need for revision history is widely recognised for computer software, and a lot of work has gone into developing version control systems and distributed version control systems (DVCSs) for tracking the revision history. However, to date, there has been no published research on how DVCSs can be applied to repositories of computational models of biological systems. We have extended the Physiome Model Repository software to be fully revision history aware, by building it on top of Mercurial, an existing DVCS. We have demonstrated the utility of this approach, when used in conjunction with the model composition facilities in CellML, to build and understand more complex models. We have also demonstrated the ability of the repository software to present version history to casual users over the web, and to highlight specific versions which are likely to be useful to users. Providing facilities for maintaining and using revision history information is an important part of building a useful repository of computational models, as this information is useful both for understanding the source of and justification for parts of a model, and to facilitate automated processes such as merges. The availability of fully revision history aware repositories, and associated tools, will therefore be of significant benefit to the community.

PyFLOWGO: An open-source platform for simulation of channelized lava thermo-rheological properties

NASA Astrophysics Data System (ADS)

Chevrel, Magdalena Oryaëlle; Labroquère, Jérémie; Harris, Andrew J. L.; Rowland, Scott K.

2018-02-01

Lava flow advance can be modeled through tracking the evolution of the thermo-rheological properties of a control volume of lava as it cools and crystallizes. An example of such a model was conceived by Harris and Rowland (2001) who developed a 1-D model, FLOWGO, in which the velocity of a control volume flowing down a channel depends on rheological properties computed following the thermal path estimated via a heat balance box model. We provide here an updated version of FLOWGO written in Python that is an open-source, modern and flexible language. Our software, named PyFLOWGO, allows selection of heat fluxes and rheological models of the user's choice to simulate the thermo-rheological evolution of the lava control volume. We describe its architecture which offers more flexibility while reducing the risk of making error when changing models in comparison to the previous FLOWGO version. Three cases are tested using actual data from channel-fed lava flow systems and results are discussed in terms of model validation and convergence. PyFLOWGO is open-source and packaged in a Python library to be imported and reused in any Python program (https://github.com/pyflowgo/pyflowgo)

Simulation test results for lift/cruise fan research and technology aircraft

NASA Technical Reports Server (NTRS)

Bland, M. P.; Konsewicz, R. K.

1976-01-01

A flight simulation program was conducted on the flight simulator for advanced aircraft (FSAA). The flight simulation was a part of a contracted effort to provide a lift/cruise fan V/STOL aircraft mathematical model for flight simulation. The simulated aircraft is a configuration of the Lift/Cruise Fan V/STOL research technology aircraft (RTA). The aircraft was powered by three gas generators driving three fans. One lift fan was installed in the nose of the aircraft, and two lift/cruise fans at the wing root. The thrust of these fans was modulated to provide pitch and roll control, and vectored to provide yaw, side force control, and longitudinal translation. Two versions of the RTA were defined. One was powered by the GE J97/LF460 propulsion system which was gas-coupled for power transfer between fans for control. The other version was powered by DDA XT701 gas generators driving 62 inch variable pitch fans. The flight control system in both versions of the RTA was the same.

INTEGRATED AIR POLLUTION CONTROL SYSTEM VERSION 5.0 - VOLUME 2: TECHNICAL DOCUMENTATION

EPA Science Inventory

The three volume report and two diskettes document the Integrated Air Pollution Control System (IAPCS), developed for the U.S. EPA to estimate costs and performance for emission control systems applied to coal-fired utility boilers. The model can project a material balance, an eq...

INTEGRATED AIR POLLUTION CONTROL SYSTEM VERSION 5.0 - VOLUME 3: PROGRAMMER'S MAINTENANCE MANUAL

EPA Science Inventory

The three volume report and two diskettes document the Integrated Air Pollution Control System (IAPCS), developed for the U.S. EPA to estimate costs and performance for emission control systems applied to coal-fired utility boilers. The model can project a material balance, an eq...

INTEGRATED AIR POLLUTION CONTROL SYSTEM VERSION 5.0 - VOLUME 1: USER'S GUIDE

EPA Science Inventory

The three volume report and two diskettes document the Integrated Air Pollution Control System (IAPCS), developed for the U.S. EPA to estimate costs and performance for emission control systems applied to coal-fired utility boilers. The model can project a material balance, an eq...

INTEGRATED AIR POLLUTION CONTROL SYSTEM, VERSION 4.0 - VOLUME 3: PROGRAMMER'S MAINTENACE MANUAL

EPA Science Inventory

The Integrated Air Pollution Control System (IAPCS) was developed for the U.S. EPA's Air and Energy Engineering Research Laboratory to estimate costs and performance for emission control systems applied to coal-fired utility boilers. The model can project a material balance, and ...

INTEGRATED AIR POLLUTION CONTROL SYSTEM, VERSION 4.0 - VOLUME 2: TECHNICAL DOCUMENTATION MANUAL

EPA Science Inventory

The Integrated Air Pollution Control System (IAPCS) was developed for the U.S. EPA's Air and Energy Engineering Research Laboratory to estimate costs and performance for emission control systems applied to coal-fired utility boilers. The model can project a material balance, and ...

Computer-automated opponent for manned air-to-air combat simulations

NASA Technical Reports Server (NTRS)

Hankins, W. W., III

1979-01-01

Two versions of a real-time digital-computer program that operates a fighter airplane interactively against a human pilot in simulated air combat were evaluated. They function by replacing one of two pilots in the Langley differential maneuvering simulator. Both versions make maneuvering decisions from identical information and logic; they differ essentially in the aerodynamic models that they control. One is very complete, but the other is much simpler, primarily characterizing the airplane's performance (lift, drag, and thrust). Both models competed extremely well against highly trained U.S. fighter pilots.

Behavioural Regulation in Exercise Questionnaire in people with schizophrenia: construct validity of the Portuguese versions.

PubMed

Costa, Raquel; Probst, Michel; Bastos, Tânia; Vilhena, Estela; Seabra, André; Corredeira, Rui

2017-06-22

People with schizophrenia have low physical activity levels that can be explained by the restriction in motivation. The Behavioural Regulation in Exercise Questionnaire-2 is a 19-item scale commonly used to assess five different motivational subtypes for physical activity. However, there are limited psychometric analyses of this version in the schizophrenia context. Moreover, there is a lack of information related to the psychometric properties of version 3 of this questionnaire, with 24 items and six different motivational subtypes. The aim of this study was to examine the construct validity of both Portuguese versions in people with schizophrenia. A total of 118 persons with schizophrenia were included (30 women). Cronbach's alpha was used for internal consistency, Pearson's correlation for the retained motivation-types, confirmatory factor analysis for the structural validity of version 2 and exploratory factor analysis for the factor structure of version 3. Analyses of version 2 provided an adequate fit index for the structure of the five factors. Exploratory analyses suggested retaining 2 factors of version 3. The results of this study suggest that version 3 was an appropriate measure to assess controlled and autonomous motivation for physical activity in people with schizophrenia and support its use in clinical practice and research. Implications for Rehabilitation This study supports the need to identify the reasons why people with schizophrenia practice physical activity. For that purpose, it is important to use valid and cost-effective instruments. The Portuguese version of BREQ-2 confirmed a 5-factor model and showed adequate fit for the application in people with schizophrenia. However, the incremental indices values were lower than expected. The Portuguese version of BREQ-3 showed acceptable psychometric properties to assess controlled and autonomous motivation for physical activity in people with schizophrenia.

SCIENCE VERSION OF PM CHEMISTRY MODEL

EPA Science Inventory

PM chemistry models containing detailed treatments of key chemical processes controlling ambient concentrations of inorganic and organic compounds in PM2.5 are needed to develop strategies for reducing PM2.5 concentrations. This task, that builds on previous research conducted i...

Simulation model of the F/A-18 high angle-of-attack research vehicle utilized for the design of advanced control laws

NASA Technical Reports Server (NTRS)

Strickland, Mark E.; Bundick, W. Thomas; Messina, Michael D.; Hoffler, Keith D.; Carzoo, Susan W.; Yeager, Jessie C.; Beissner, Fred L., Jr.

1996-01-01

The 'f18harv' six degree-of-freedom nonlinear batch simulation used to support research in advanced control laws and flight dynamics issues as part of NASA's High Alpha Technology Program is described in this report. This simulation models an F/A-18 airplane modified to incorporate a multi-axis thrust-vectoring system for augmented pitch and yaw control power and actuated forebody strakes for enhanced aerodynamic yaw control power. The modified configuration is known as the High Alpha Research Vehicle (HARV). The 'f18harv' simulation was an outgrowth of the 'f18bas' simulation which modeled the basic F/A-18 with a preliminary version of a thrust-vectoring system designed for the HARV. The preliminary version consisted of two thrust-vectoring vanes per engine nozzle compared with the three vanes per engine actually employed on the F/A-18 HARV. The modeled flight envelope is extensive in that the aerodynamic database covers an angle-of-attack range of -10 degrees to +90 degrees, sideslip range of -20 degrees to +20 degrees, a Mach Number range between 0.0 and 2.0, and an altitude range between 0 and 60,000 feet.

Long wavelength propagation capacity, version 1.1 (computer diskette)

NASA Astrophysics Data System (ADS)

1994-05-01

File Characteristics: software and data file. (72 files); ASCII character set. Physical Description: 2 computer diskettes; 3 1/2 in.; high density; 1.44 MB. System Requirements: PC compatible; Digital Equipment Corp. VMS; PKZIP (included on diskette). This report describes a revision of the Naval Command, Control and Ocean Surveillance Center RDT&E Division's Long Wavelength Propagation Capability (LWPC). The first version of this capability was a collection of separate FORTRAN programs linked together in operation by a command procedure written in an operating system unique to the Digital Equipment Corporation (Ferguson & Snyder, 1989a, b). A FORTRAN computer program named Long Wavelength Propagation Model (LWPM) was developed to replace the VMS control system (Ferguson & Snyder, 1990; Ferguson, 1990). This was designated version 1 (LWPC-1). This program implemented all the features of the original VMS plus a number of auxiliary programs that provided summaries of the files and graphical displays of the output files. This report describes a revision of the LWPC, designated version 1.1 (LWPC-1.1)

Development and validation of the Core Beliefs Questionnaire in a sample of individuals with social anxiety disorder.

PubMed

Wong, Quincy J J; Gregory, Bree; Gaston, Jonathan E; Rapee, Ronald M; Wilson, Judith K; Abbott, Maree J

2017-01-01

Prominent cognitive models of social anxiety have consistently emphasised the importance of beliefs about the self in the aetiology and maintenance of social anxiety. The present study sought to develop and validate a new measure of core beliefs about the self for SAD, the Core Beliefs Questionnaire (CBQ). Three versions of the CBQ were developed: a Trait version (fundamental absolute statements about the self), a Contingent version (statements about the self related to a specific social-evaluative situation), and an Other version (statements about how others view the self in social-evaluative situations generally). The psychometric features of the scales were examined in clinical (n=269) and non-clinical (n=67) samples. Exploratory factor analysis yielded a one factor model for all three versions of the questionnaire. Total scores differentiated individuals with SAD from individuals without a psychiatric condition, and demonstrated excellent internal consistency. The three CBQ versions had positive associations with social anxiety while controlling for depression, although zero-order correlations indicated the Trait version was more strongly related to depression than social anxiety, the Contingent version was similarly related to depression and social anxiety, and the Other version was more strongly related to social anxiety than depression. Scores on all three versions of the CBQ reduced from pre- to post-treatment and this change predicted treatment outcome. This is the first validation study of the CBQ. This study provides initial support for the reliability and validity of the CBQ. Copyright © 2016 Elsevier B.V. All rights reserved.

Quality of life (QOL) among community dwelling older people in Taiwan measured by the CASP-19, an index to capture QOL in old age.

PubMed

Wu, Tai-Yin; Chie, Wei-Chu; Kuo, Kuan-Liang; Wong, Wai-Kuen; Liu, Jen-Pei; Chiu, Shih-Ting; Cheng, Yeung-Hung; Netuveli, Gopal; Blane, David

2013-01-01

There was no existing scale in Mandarin Chinese to specifically measure QOL in old age. We aimed to validate a Chinese Taiwan version of the CASP-19 (control, autonomy, self-realization, pleasure), a QOL questionnaire, in Taiwan. The existing CASP-19 Cantonese version was modified into Chinese Taiwan version and pilot tested. Data were then gathered from 699 older people. Score distribution, exploratory and confirmatory factor structure, reliability and clinical validity of the CASP-19 and its shortened version, the CASP-12, were examined. The mean age of the participants was 75.5 (standard deviation (SD) 6.5), and half (49.5%) were female. The mean CASP-19 score was 38.2 (range 11-56; SD 7.1), lower than that of Western countries. Exploratory factor analysis revealed an additional factor, 'participation' (CASPP-19). There was satisfactory internal consistency (Cronbach's α 0.63-0.85) for the subscales, except for the control domain. For the 19-item scale, the first order five-domain model (CASPP-19) yielded the best fit. For the CASP-12, first and second order original CASP-12 models performed equally well. There was an inverse relationship between the CASP total scores and frailty, chronic diseases, depressive disorders, living alone and fall events in the past 12months, supporting good clinical validity for all versions of the CASP scale (CASP-19, CASPP-19, original and new CASP-12). The original CASP-12 may be presently the best choice for use in China, Taiwan or other Mandarin-speaking populations due to its conciseness and model parsimony. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Changing Locus of Control: Steelworkers Adjusting to Forced Unemployment

ERIC Educational Resources Information Center

Legerski, Elizabeth Miklya; Cornwall, Marie; O'Neil, Brock

2006-01-01

Using an abbreviated version of Levenson's (1981) locus of control scale, we examine change over time in the locus of control of displaced steelworkers. The first data collection occurred approximately six months after plant shutdown, the second occurred a year later. Utilizing a multidimensional measurement model, we test the major assumption…

TRMM Microwave Imager (TMI) Updates for Final Data Version Release

NASA Technical Reports Server (NTRS)

Kroodsma, Rachael A; Bilanow, Stephen; Ji, Yimin; McKague, Darren

2017-01-01

The Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI) dataset released by the Precipitation Processing System (PPS) will be updated to a final version within the next year. These updates are based on increased knowledge in recent years of radiometer calibration and sensor performance issues. In particular, the Global Precipitation Measurement (GPM) Microwave Imager (GMI) is used as a model for many of the TMI version updates. This paper discusses four aspects of the TMI data product that will be improved: spacecraft attitude, calibration and quality control, along-scan bias corrections, and sensor pointing accuracy. These updates will be incorporated into the final TMI data version, improving the quality of the data product and ensuring accurate geophysical parameters can be derived from TMI.

Students' online collaborative intention for group projects: Evidence from an extended version of the theory of planned behaviour.

PubMed

Cheng, Eddie W L; Chu, Samuel K W

2016-08-01

Given the increasing use of web technology for teaching and learning, this study developed and examined an extended version of the theory of planned behaviour (TPB) model, which explained students' intention to collaborate online for their group projects. Results indicated that past experience predicted the three antecedents of intention, while past behaviour was predictive of subjective norm and perceived behavioural control. Moreover, the three antecedents (attitude towards e-collaboration, subjective norm and perceived behavioural control) were found to significantly predict e-collaborative intention. This study explored the use of the "remember" type of awareness (i.e. past experience) and evaluated the value of the "know" type of awareness (i.e. past behaviour) in the TPB model. © 2015 International Union of Psychological Science.

Quantifying Parameter Sensitivity, Interaction and Transferability in Hydrologically Enhanced Versions of Noah-LSM over Transition Zones

NASA Technical Reports Server (NTRS)

Rosero, Enrique; Yang, Zong-Liang; Wagener, Thorsten; Gulden, Lindsey E.; Yatheendradas, Soni; Niu, Guo-Yue

2009-01-01

We use sensitivity analysis to identify the parameters that are most responsible for shaping land surface model (LSM) simulations and to understand the complex interactions in three versions of the Noah LSM: the standard version (STD), a version enhanced with a simple groundwater module (GW), and version augmented by a dynamic phenology module (DV). We use warm season, high-frequency, near-surface states and turbulent fluxes collected over nine sites in the US Southern Great Plains. We quantify changes in the pattern of sensitive parameters, the amount and nature of the interaction between parameters, and the covariance structure of the distribution of behavioral parameter sets. Using Sobol s total and first-order sensitivity indexes, we show that very few parameters directly control the variance of the model output. Significant parameter interaction occurs so that not only the optimal parameter values differ between models, but the relationships between parameters change. GW decreases parameter interaction and appears to improve model realism, especially at wetter sites. DV increases parameter interaction and decreases identifiability, implying it is overparameterized and/or underconstrained. A case study at a wet site shows GW has two functional modes: one that mimics STD and a second in which GW improves model function by decoupling direct evaporation and baseflow. Unsupervised classification of the posterior distributions of behavioral parameter sets cannot group similar sites based solely on soil or vegetation type, helping to explain why transferability between sites and models is not straightforward. This evidence suggests a priori assignment of parameters should also consider climatic differences.

External cephalic version for breech presentation with or without spinal analgesia in nulliparous women at term: a randomized controlled trial.

PubMed

Weiniger, Carolyn F; Ginosar, Yehuda; Elchalal, Uriel; Sharon, Einav; Nokrian, Malka; Ezra, Yossef

2007-12-01

To compare the success of external cephalic version using spinal analgesia with no analgesia among nulliparas. A prospective randomized controlled trial was performed in a tertiary referral center delivery suite. Nulliparous women at term requesting external cephalic version for breech presentation were randomized to receive spinal analgesia (7.5 mg bupivacaine) or no analgesia before the external cephalic version. An experienced obstetrician performed the external cephalic version. Primary outcome was successful conversion to vertex presentation. Seventy-four women were enrolled, and 70 analyzed (36 spinal, 34 no analgesia). Successful external cephalic version occurred among 24 of 36 (66.7%) women randomized to receive spinal analgesia compared with 11 of 34 (32.4%) without, P=.004 (95% confidence interval [CI] of the difference: 0.0954-0.5513). External cephalic version with spinal analgesia resulted in a lower visual analog pain score, 1.76+/-2.74 compared with 6.84+/-3.08 without, P<.001. A secondary analysis logistic regression model demonstrated that the odds of external cephalic version success was 4.0-fold higher when performed with spinal analgesia P=.02 (95% CI, odds ratio [OR] 1.2-12.9). Complete breech presentation before attempting external cephalic version increased the odds of success 8.2-fold, P=.001 (95% CI, OR 2.2-30.3). Placental position, estimated fetal weight, and maternal weight did not contribute to the success rate when spinal analgesia was used. There were no cases of placental abruption or fetal distress. Administration of spinal analgesia significantly increases the success rate of external cephalic version among nulliparous women at term, which allows possible normal vaginal delivery. ClinicalTrials.gov, www.clinicaltrials.gov, NCT00119184 I.

Aircraft noise synthesis system: Version 4 user instructions

NASA Technical Reports Server (NTRS)

Mccurdy, David A.; Sullivan, Brenda M.; Grandle, Robert E.

1987-01-01

A modified version of the Aircraft Noise Synthesis System with improved directivity and tonal content modeling has been developed. The synthesis system is used to provide test stimuli for studies of community annoyance to aircraft flyover noise. The computer-based system generates realistic, time-varying audio simulations of aircraft flyover noise at a specified observer location on the ground. The synthesis takes into account the time-varying aircraft position relative to the observer; specified reference spectra consisting of broadband, narrowband, and pure tone components; directivity patterns; Doppler shift; atmospheric effects; and ground effects. These parameters can be specified and controlled in such a way as to generate stimuli in which certain noise characteristics such as duration or tonal content are independently varied while the remaining characteristics such as broadband content are held constant. The modified version of the system provides improved modeling of noise directivity patterns and an increased number of pure tone components. User instructions for the modified version of the synthesis system are provided.

Psychometric properties of the Spanish version of the Controlling Coach Behaviors Scale in the sport context.

PubMed

Castillo, Isabel; Tomás, Inés; Ntoumanis, Nikos; Bartholomew, Kimberley; Duda, Joan L; Balaguer, Isabel

2014-01-01

The purpose of this research was to translate into Spanish and examine the psychometric properties of the Spanish version of the Controlling Coach Behaviors Scale (CCBS) in male soccer players. The CCBS is a questionnaire designed to assess athletes' perceptions of sports coaches' controlling interpersonal style from the perspective of the self-determination theory. Study 1 tested the factorial structure of the translated scale using confirmatory factor analysis (CFA) and provided evidence of discriminant validity. Studies 2 and 3 examined the invariance across time and across competitive level via multi-sample CFA. Reliability analyses were also conducted. The CFA results revealed that a four-factor model was acceptable, indicating that a controlling interpersonal style is a multidimensional construct represented by four separate and related controlling coaching strategies. Further, results supported the invariance of the CCBS factor structure across time and competitive level and provided support for the internal consistency of the scale. Overall, the CCBS demonstrated adequate internal consistency, as well as good factorial validity. The Spanish version of the CCBS represents a valid and reliable adaptation of the instrument, which can be confidently used to measure soccer players' perceptions of their coaches' controlling interpersonal style.

Structural mode significance using INCA. [Interactive Controls Analysis computer program

NASA Technical Reports Server (NTRS)

Bauer, Frank H.; Downing, John P.; Thorpe, Christopher J.

1990-01-01

Structural finite element models are often too large to be used in the design and analysis of control systems. Model reduction techniques must be applied to reduce the structural model to manageable size. In the past, engineers either performed the model order reduction by hand or used distinct computer programs to retrieve the data, to perform the significance analysis and to reduce the order of the model. To expedite this process, the latest version of INCA has been expanded to include an interactive graphical structural mode significance and model order reduction capability.

Modeling and Grid Generation of Iced Airfoils

NASA Technical Reports Server (NTRS)

Vickerman, Mary B.; Baez, Marivell; Braun, Donald C.; Hackenberg, Anthony W.; Pennline, James A.; Schilling, Herbert W.

2007-01-01

SmaggIce Version 2.0 is a software toolkit for geometric modeling and grid generation for two-dimensional, singleand multi-element, clean and iced airfoils. A previous version of SmaggIce was described in Preparing and Analyzing Iced Airfoils, NASA Tech Briefs, Vol. 28, No. 8 (August 2004), page 32. To recapitulate: Ice shapes make it difficult to generate quality grids around airfoils, yet these grids are essential for predicting ice-induced complex flow. This software efficiently creates high-quality structured grids with tools that are uniquely tailored for various ice shapes. SmaggIce Version 2.0 significantly enhances the previous version primarily by adding the capability to generate grids for multi-element airfoils. This version of the software is an important step in streamlining the aeronautical analysis of ice airfoils using computational fluid dynamics (CFD) tools. The user may prepare the ice shape, define the flow domain, decompose it into blocks, generate grids, modify/divide/merge blocks, and control grid density and smoothness. All these steps may be performed efficiently even for the difficult glaze and rime ice shapes. Providing the means to generate highly controlled grids near rough ice, the software includes the creation of a wrap-around block (called the "viscous sublayer block"), which is a thin, C-type block around the wake line and iced airfoil. For multi-element airfoils, the software makes use of grids that wrap around and fill in the areas between the viscous sub-layer blocks for all elements that make up the airfoil. A scripting feature records the history of interactive steps, which can be edited and replayed later to produce other grids. Using this version of SmaggIce, ice shape handling and grid generation can become a practical engineering process, rather than a laborious research effort.

Markov Chains For Testing Redundant Software

NASA Technical Reports Server (NTRS)

White, Allan L.; Sjogren, Jon A.

1990-01-01

Preliminary design developed for validation experiment that addresses problems unique to assuring extremely high quality of multiple-version programs in process-control software. Approach takes into account inertia of controlled system in sense it takes more than one failure of control program to cause controlled system to fail. Verification procedure consists of two steps: experimentation (numerical simulation) and computation, with Markov model for each step.

Inertial Survey Application to Civil Works,

DTIC Science & Technology

1983-01-01

closer together the ZUPTS must be performed. ZUPTS are used by the system to provide external information to the error control system used (Kalman...the best estimate of the system states. Accuracy of the system is increased when the sensor information from the inertial platform is compared with the...building a new version of its Auto-Surveyor System to be known as LASS II. This version will be based on the production model of the PADS presently

Doing It Right: 366 answers to computing questions you didn't know you had

DOE Office of Scientific and Technical Information (OSTI.GOV)

Herring, Stuart Davis

Slides include information on history: version control, version control: branches, version control: Git, releases, requirements, readability, readability control flow, global variables, architecture, architecture redundancy, processes, input/output, unix, etcetera.

Paranormal beliefs of Latvian college students: a Latvian version of the revised paranormal belief scale.

PubMed

Utinans, A; Ancane, G; Tobacyk, J J; Boyraz, G; Livingston, M M; Tobacyk, J S

2015-02-01

A Latvian version of the Revised Paranormal Belief Scale (RPBS) was completed by 229 Latvian university students. Exploratory and confirmatory factor analyses revealed six relatively independent factors labeled Magical Abilities, Psychokinesis, Traditional Religious Belief, Superstition, Spirit Travel, and Extraordinary Life Forms. Based on the motivational-control model, it was hypothesized that the societal stressors affecting Latvian society during the last 50 yr. have led to a reduced sense of personal control which, in turn, has resulted in increased endorsement of paranormal beliefs to re-establish a sense of control. The motivational-control hypothesis was not supported. Results indicated that (except for Traditional Religious Belief in women), the majority of these students were disbelievers in paranormal phenomena. As hypothesized, Latvian women reported significantly greater paranormal belief than men.

Development of Unsteady Aerodynamic and Aeroelastic Reduced-Order Models Using the FUN3D Code

NASA Technical Reports Server (NTRS)

Silva, Walter A.; Vatsa, Veer N.; Biedron, Robert T.

2009-01-01

Recent significant improvements to the development of CFD-based unsteady aerodynamic reduced-order models (ROMs) are implemented into the FUN3D unstructured flow solver. These improvements include the simultaneous excitation of the structural modes of the CFD-based unsteady aerodynamic system via a single CFD solution, minimization of the error between the full CFD and the ROM unsteady aero- dynamic solution, and computation of a root locus plot of the aeroelastic ROM. Results are presented for a viscous version of the two-dimensional Benchmark Active Controls Technology (BACT) model and an inviscid version of the AGARD 445.6 aeroelastic wing using the FUN3D code.

Paperless Contract Folder’s (PCF) DoD 5015.2 Certification

DTIC Science & Technology

2010-06-01

Draft Version Controls ...........................................................11 i. Electronic Routing of Purchase Request (Funding) Documents...of electronic records, version control , robust search and retrieval, and automated disposition that is compliant with legal requirements. As shown...h. Draft Version Controls Draft and versioning controls track the changes to the documents once they are saved. Draft numbers (0.1, 0.2, 0.3

The p-version of the finite element method in incremental elasto-plastic analysis

NASA Technical Reports Server (NTRS)

Holzer, Stefan M.; Yosibash, Zohar

1993-01-01

Whereas the higher-order versions of the finite elements method (the p- and hp-version) are fairly well established as highly efficient methods for monitoring and controlling the discretization error in linear problems, little has been done to exploit their benefits in elasto-plastic structural analysis. Aspects of incremental elasto-plastic finite element analysis which are particularly amenable to improvements by the p-version is discussed. These theoretical considerations are supported by several numerical experiments. First, an example for which an analytical solution is available is studied. It is demonstrated that the p-version performs very well even in cycles of elasto-plastic loading and unloading, not only as compared to the traditional h-version but also in respect to the exact solution. Finally, an example of considerable practical importance - the analysis of a cold-worked lug - is presented which demonstrates how the modeling tools offered by higher-order finite element techniques can contribute to an improved approximation of practical problems.

A multisensor evaluation of the asymmetric convective model, version 2, in southeast Texas.

PubMed

Kolling, Jenna S; Pleim, Jonathan E; Jeffries, Harvey E; Vizuete, William

2013-01-01

There currently exist a number of planetary boundary layer (PBL) schemes that can represent the effects of turbulence in daytime convective conditions, although these schemes remain a large source of uncertainty in meteorology and air quality model simulations. This study evaluates a recently developed combined local and nonlocal closure PBL scheme, the Asymmetric Convective Model, version 2 (ACM2), against PBL observations taken from radar wind profilers, a ground-based lidar, and multiple daytime radiosonde balloon launches. These observations were compared against predictions of PBLs from the Weather Research and Forecasting (WRF) model version 3.1 with the ACM2 PBL scheme option, and the Fifth-Generation Meteorological Model (MM5) version 3.7.3 with the Eta PBL scheme option that is currently being used to develop ozone control strategies in southeast Texas. MM5 and WRF predictions during the regulatory modeling episode were evaluated on their ability to predict the rise and fall of the PBL during daytime convective conditions across southeastern Texas. The MM5 predicted PBLs consistently underpredicted observations, and were also less than the WRF PBL predictions. The analysis reveals that the MM5 predicted a slower rising and shallower PBL not representative of the daytime urban boundary layer. Alternatively, the WRF model predicted a more accurate PBL evolution improving the root mean square error (RMSE), both temporally and spatially. The WRF model also more accurately predicted vertical profiles of temperature and moisture in the lowest 3 km of the atmosphere. Inspection of median surface temperature and moisture time-series plots revealed higher predicted surface temperatures in WRF and more surface moisture in MM5. These could not be attributed to surface heat fluxes, and thus the differences in performance of the WRF and MM5 models are likely due to the PBL schemes. An accurate depiction of the diurnal evolution of the planetary boundary layer (PBL) is necessary for realistic air quality simulations, and for formulating effective policy. The meteorological model used to support the southeast Texas 03 attainment demonstration made predictions of the PBL that were consistently less than those found in observations. The use of the Asymmetric Convective Model, version 2 (ACM2), predicted taller PBL heights and improved model predictions. A lower predicted PBL height in an air quality model would increase precursor concentrations and change the chemical production of O3 and possibly the response to control strategies.

Modeling and advanced sliding mode controls of crawler cranes considering wire rope elasticity and complicated operations

NASA Astrophysics Data System (ADS)

Tuan, Le Anh; Lee, Soon-Geul

2018-03-01

In this study, a new mathematical model of crawler cranes is developed for heavy working conditions, with payload-lifting and boom-hoisting motions simultaneously activated. The system model is built with full consideration of wind disturbances, geometrical nonlinearities, and cable elasticities of cargo lifting and boom luffing. On the basis of this dynamic model, three versions of sliding mode control are analyzed and designed to control five system outputs with only two inputs. When used in complicated operations, the effectiveness of the controllers is analyzed using analytical investigation and numerical simulation. Results indicate the effectiveness of the control algorithms and the proposed dynamic model. The control algorithms asymptotically stabilize the system with finite-time convergences, remaining robust amid disturbances and parametric uncertainties.

Smarter Grid Solutions Demonstrates Smart Campus Power Control at NREL -

Science.gov Websites

Video Text Version | Energy Systems Integration Facility | NREL Smarter Grid Solutions Demonstrates Smart Campus Power Control at NREL - Video Text Version Smarter Grid Solutions Demonstrates Smart Campus Power Control at NREL - Video Text Version This is the text version for the Smarter Grid Solutions

Advanced Targeting Cost Function Design for Evolutionary Optimization of Control of Logistic Equation

NASA Astrophysics Data System (ADS)

Senkerik, Roman; Zelinka, Ivan; Davendra, Donald; Oplatkova, Zuzana

2010-06-01

This research deals with the optimization of the control of chaos by means of evolutionary algorithms. This work is aimed on an explanation of how to use evolutionary algorithms (EAs) and how to properly define the advanced targeting cost function (CF) securing very fast and precise stabilization of desired state for any initial conditions. As a model of deterministic chaotic system, the one dimensional Logistic equation was used. The evolutionary algorithm Self-Organizing Migrating Algorithm (SOMA) was used in four versions. For each version, repeated simulations were conducted to outline the effectiveness and robustness of used method and targeting CF.

Sierra/SolidMechanics 4.48 User's Guide: Addendum for Shock Capabilities.

DOE Office of Scientific and Technical Information (OSTI.GOV)

Plews, Julia A.; Crane, Nathan K; de Frias, Gabriel Jose

This is an addendum to the Sierra/SolidMechanics 4.48 User's Guide that documents additional capabilities available only in alternate versions of the Sierra/SolidMechanics (Sierra/SM) code. These alternate versions are enhanced to provide capabilities that are regulated under the U.S. Department of State's International Traffic in Arms Regulations (ITAR) export-control rules. The ITAR regulated codes are only distributed to entities that comply with the ITAR export-control requirements. The ITAR enhancements to Sierra/SM in- clude material models with an energy-dependent pressure response (appropriate for very large deformations and strain rates) and capabilities for blast modeling. Since this is an addendum to the standardmore » Sierra/SM user's guide, please refer to that document first for general descriptions of code capability and use.« less

Impact of Amazon deforestation on climate simulations using the NCAR CCM2/BATS model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hahmann, A.N.; Dickinson, R.E.

Model validation and results are briefly presented for a simulation of deforestation of the Amazon rainforest. This initial study is made using assumptions regarding deforestation similar to those in earlier studies with several versions of the NCAR Community Climate Model (CCM) couples to the Biosphere-Atmosphere Transfer Scheme (BATS). The model used is a revised version of the NCAR CCM Version 2 coupled to BATS Version 1e. This paper discusses the portion of validation dealing with the distribution of precipitation; the simulation displays very good agreement with observed rainfall rates for the austral summer. Preliminary results from an 8-year simulation ofmore » deforestation are similar to that of previous studies. Annual precipitation and evaporation are reduced, while surface air temperatures show a slight increase. A substantial bimodal pattern appears in the results, with the Amazon decrease of precipitation and temperature increase accompanied by changes in the opposite sign to the southeast of the Amazon. Similar patterns have occurred in other studies, but not always in exactly the same locations. Evidently, how much of the region of rainfall increase occurs in the deforested area over the Amazon strongly affects the inferred statistics. It is likely that this pattern depends on the model control climatology and possibly other features. 16 refs., 2 figs., 2 tabs.« less

Integrated Farm System Model Version 4.1 and Dairy Gas Emissions Model Version 3.1 software release and distribution

USDA-ARS?s Scientific Manuscript database

Animal facilities are significant contributors of gaseous emissions including ammonia (NH3) and nitrous oxide (N2O). Previous versions of the Integrated Farm System Model (IFSM version 4.0) and Dairy Gas Emissions Model (DairyGEM version 3.0), two whole-farm simulation models developed by USDA-ARS, ...

Alienating Curriculum Work in Australian Vocational Education and Training

ERIC Educational Resources Information Center

Hodge, Steven

2016-01-01

Competency-based training (CBT) is a curriculum model employed in educational sectors, professions and industries around the world. A significant feature of the model is its permeability to control by interests outside education. In this article, a "Neoliberal" version of CBT is described and analysed in the context of Australian…

Dynamic evaluation of CMAQ part I: Separating the effects of ...

EPA Pesticide Factsheets

A dynamic evaluation of the Community Multiscale Air Quality (CMAQ) modeling system version 5.0.1 was conducted to evaluate the model's ability to predict changes in ozone levels between 2002 and 2005, a time period characterized by emission reductions associated with the EPA's Nitrogen Oxides State Implementation Plan as well as significant reductions in mobile source emissions. Model results for the summers of 2002 and 2005 were compared to simulations from a previous version of CMAQ to assess the impact of model updates on predicted pollutant response. Changes to the model treatment of emissions, meteorology and chemistry had substantial impacts on the simulated ozone concentrations. While the median bias for high summertime ozone decreased in both years compared to previous simulations, the observed decrease in ozone from 2002 to 2005 in the eastern US continued to be underestimated by the model. Additional “cross” simulations were used to decompose the model predicted change in ozone into the change due to emissions, the change due to meteorology and any remaining change not explained individually by these two components. The decomposition showed that the emission controls led to a decrease in modeled high summertime ozone close to twice as large as the decrease attributable to changes in meteorology alone. Quantifying the impact of retrospective emission controls by removing the impacts of meteorology during the control period can be a valuable approac

BACT Simulation User Guide (Version 7.0)

NASA Technical Reports Server (NTRS)

Waszak, Martin R.

1997-01-01

This report documents the structure and operation of a simulation model of the Benchmark Active Control Technology (BACT) Wind-Tunnel Model. The BACT system was designed, built, and tested at NASA Langley Research Center as part of the Benchmark Models Program and was developed to perform wind-tunnel experiments to obtain benchmark quality data to validate computational fluid dynamics and computational aeroelasticity codes, to verify the accuracy of current aeroservoelasticity design and analysis tools, and to provide an active controls testbed for evaluating new and innovative control algorithms for flutter suppression and gust load alleviation. The BACT system has been especially valuable as a control system testbed.

Robust controller design for flexible structures using normalized coprime factor plant descriptions

NASA Technical Reports Server (NTRS)

Armstrong, Ernest S.

1993-01-01

Stabilization is a fundamental requirement in the design of feedback compensators for flexible structures. The search for the largest neighborhood around a given design plant for which a single controller produces closed-loop stability can be formulated as an H(sub infinity) control problem. The use of normalized coprime factor plant descriptions, in which the plant perturbations are defined as additive modifications to the coprime factors, leads to a closed-form expression for the maximum neighborhood boundary allowing optimal and suboptimal H(sub infinity) compensators to be computed directly without the usual gamma iteration. A summary of the theory on robust stabilization using normalized coprime factor plant descriptions is presented, and the application of the theory to the computation of robustly stable compensators for the phase version of the Control-Structures Interaction (CSI) Evolutionary Model is described. Results from the application indicate that the suboptimal version of the theory has the potential of providing the bases for the computation of low-authority compensators that are robustly stable to expected variations in design model parameters and additive unmodeled dynamics.

Factor structure and validation of the Attentional Control Scale.

PubMed

Judah, Matt R; Grant, DeMond M; Mills, Adam C; Lechner, William V

2014-04-01

The Attentional Control Scale (ACS; Derryberry & Reed, 2002) has been used to assess executive control over attention in numerous studies, but no published data have examined the factor structure of the English version. The current studies addressed this need and tested the predictive and convergent validity of the ACS subscales. In Study 1, exploratory factor analysis yielded a two-factor model with Focusing and Shifting subscales. In Study 2, confirmatory factor analysis supported this model and suggested superior fit compared to the factor structure of the Icelandic version (Ólafsson et al., 2011). Study 3 examined correlations between the ACS subscales and measures of working memory, anxiety, and cognitive control. Study 4 examined correlations between the subscales and reaction times on a mixed-antisaccade task, revealing positive correlations for antisaccade performance and prosaccade latency with Focusing scores and between switch trial performance and Shifting scores. Additionally, the findings partially supported unique relationships between Focusing and trait anxiety and between Shifting and depression that have been noted in recent research. Although the results generally support the validity of the ACS, additional research using performance-based tasks is needed.

Reproducibility in Computational Neuroscience Models and Simulations

PubMed Central

McDougal, Robert A.; Bulanova, Anna S.; Lytton, William W.

2016-01-01

Objective Like all scientific research, computational neuroscience research must be reproducible. Big data science, including simulation research, cannot depend exclusively on journal articles as the method to provide the sharing and transparency required for reproducibility. Methods Ensuring model reproducibility requires the use of multiple standard software practices and tools, including version control, strong commenting and documentation, and code modularity. Results Building on these standard practices, model sharing sites and tools have been developed that fit into several categories: 1. standardized neural simulators, 2. shared computational resources, 3. declarative model descriptors, ontologies and standardized annotations; 4. model sharing repositories and sharing standards. Conclusion A number of complementary innovations have been proposed to enhance sharing, transparency and reproducibility. The individual user can be encouraged to make use of version control, commenting, documentation and modularity in development of models. The community can help by requiring model sharing as a condition of publication and funding. Significance Model management will become increasingly important as multiscale models become larger, more detailed and correspondingly more difficult to manage by any single investigator or single laboratory. Additional big data management complexity will come as the models become more useful in interpreting experiments, thus increasing the need to ensure clear alignment between modeling data, both parameters and results, and experiment. PMID:27046845

Reading Pictures for Story Comprehension Requires Mental Imagery Skills

PubMed Central

Boerma, Inouk E.; Mol, Suzanne E.; Jolles, Jelle

2016-01-01

We examined the role of mental imagery skills on story comprehension in 150 fifth graders (10- to 12-year-olds), when reading a narrative book chapter with alternating words and pictures (i.e., text blocks were alternated by one- or two-page picture spreads). A parallel group design was used, in which we compared our experimental book version, in which pictures were used to replace parts of the corresponding text, to two control versions, i.e., a text-only version and a version with the full story text and all pictures. Analyses showed an interaction between mental imagery and book version: children with higher mental imagery skills outperformed children with lower mental imagery skills on story comprehension after reading the experimental narrative. This was not the case for both control conditions. This suggests that children’s mental imagery skills significantly contributed to the mental representation of the story that they created, by successfully integrating information from both words and pictures. The results emphasize the importance of mental imagery skills for explaining individual variability in reading development. Implications for educational practice are that we should find effective ways to instruct children how to “read” pictures and how to develop and use their mental imagery skills. This will probably contribute to their mental models and therefore their story comprehension. PMID:27822194

Economic Impact Forecast System (EIFS). Version 2.0. Users Manual. Supplement II. European Economic Impact Forecast System (EEIFS), Phase 1, (FRG/EIFS Pilot Model).

DTIC Science & Technology

1982-05-01

Chmpip. tL : Construction engineering Research Laboratory ; available from NTIS. 1982. 71 p. (Technical report / Construction Engineering Researsh ...AD-Al17 661 CONSTRUCTION ENGINEERING RESEARCH LAB (ARMY) CHAMPAIGN IL F/G 5/3 ECONOMIC IMPACT FORECAST SYSTEM (EIFS). VERSION 2.0. USERS MANU--ETC(u...CONSTRUCTION ENGINEERING RESEARCH LABORATORY 4A762720A896-C-004 P.O. BOX 4005, CHAMPAIGN, IL 61820 I. CONTROLLING OFFICE NAME AND ADDRESS It. REPORT

PAN AIR: A computer program for predicting subsonic or supersonic linear potential flows about arbitrary configurations using a higher order panel method. Volume 2: User's manual (version 3.0)

NASA Technical Reports Server (NTRS)

Sidwell, Kenneth W.; Baruah, Pranab K.; Bussoletti, John E.; Medan, Richard T.; Conner, R. S.; Purdon, David J.

1990-01-01

A comprehensive description of user problem definition for the PAN AIR (Panel Aerodynamics) system is given. PAN AIR solves the 3-D linear integral equations of subsonic and supersonic flow. Influence coefficient methods are used which employ source and doublet panels as boundary surfaces. Both analysis and design boundary conditions can be used. This User's Manual describes the information needed to use the PAN AIR system. The structure and organization of PAN AIR are described, including the job control and module execution control languages for execution of the program system. The engineering input data are described, including the mathematical and physical modeling requirements. Version 3.0 strictly applies only to PAN AIR version 3.0. The major revisions include: (1) inputs and guidelines for the new FDP module (which calculates streamlines and offbody points); (2) nine new class 1 and class 2 boundary conditions to cover commonly used modeling practices, in particular the vorticity matching Kutta condition; (3) use of the CRAY solid state Storage Device (SSD); and (4) incorporation of errata and typo's together with additional explanation and guidelines.

Representations of the Stratospheric Polar Vortices in Versions 1 and 2 of the Goddard Earth Observing System Chemistry-Climate Model (GEOS CCM)

NASA Technical Reports Server (NTRS)

Pawson, S.; Stolarski, R.S.; Nielsen, J.E.; Perlwitz, J.; Oman, L.; Waugh, D.

2009-01-01

This study will document the behavior of the polar vortices in two versions of the GEOS CCM. Both versions of the model include the same stratospheric chemistry, They differ in the underlying circulation model. Version 1 of the GEOS CCM is based on the Goddard Earth Observing System, Version 4, general circulation model which includes the finite-volume (Lin-Rood) dynamical core and physical parameterizations from Community Climate Model, Version 3. GEOS CCM Version 2 is based on the GEOS-5 GCM that includes a different tropospheric physics package. Baseline simulations of both models, performed at two-degree spatial resolution, show some improvements in Version 2, but also some degradation, In the Antarctic, both models show an over-persistent stratospheric polar vortex with late breakdown, but the year-to-year variations that are overestimated in Version I are more realistic in Version 2. The implications of this for the interactions with tropospheric climate, the Southern Annular Mode, will be discussed. In the Arctic both model versions show a dominant dynamically forced variabi;ity, but Version 2 has a persistent warm bias in the low stratosphere and there are seasonal differences in the simulations. These differences will be quantified in terms of climate change and ozone loss. Impacts of model resolution, using simulations at one-degree and half-degree, and changes in physical parameterizations (especially the gravity wave drag) will be discussed.

A reverse pathway? Actual and perceived skill proficiency and physical activity.

PubMed

Barnett, Lisa M; Morgan, Philip J; Van Beurden, Eric; Ball, Kylie; Lubans, David R

2011-05-01

Motor skills are considered a prerequisite to physical activity, yet the relationship may be reciprocal and perceived sports competence might mediate associations. In 2006/2007, 215 adolescents completed motor skill proficiency (Get Skilled Get Active), perceived sport competence (Physical Self-Perception Profile) and physical activity assessments (Adolescent Physical Activity Recall Questionnaire) as part of the Physical Activity and Skills Study. Using AMOS (Version 7.0), reciprocal relationships were examined between motor skill (object control and locomotor) and moderate to vigorous physical activity (MVPA). Both models were then run in different versions to understand the role of perceived sports competence as a potential mediator. Mean age was 16.4 yr (SD=0.6), 51.6% (111/215) were females. A reciprocal relationship between object control and MVPA and a one-way relationship from MVPA to locomotor skill was found. When perceived sports competence was examined as a mediator, the best-fitting model versions explained 16% (R=0.16) MVPA variation, and 30% object control (R=0.30), and 12% locomotor skill variation (R=0.12) (reverse relationship). Perceived sports competence partially mediates the relationship between object control proficiency and physical activity for both directions and fully mediates the relationship between physical activity and locomotor skill; but only when locomotor skill is the outcome. If the relationship between object control skill and physical activity is viewed as a "positive feedback loop," skill development and increasing physical activity should simultaneously be targeted in physical activity interventions. Increasing perceived sport competence should also be an intervention focus. © 2011 by the American College of Sports Medicine

An adaptive maneuvering logic computer program for the simulation of one-on-one air-to-air combat. Volume 1: General description

NASA Technical Reports Server (NTRS)

Burgin, G. H.; Fogel, L. J.; Phelps, J. P.

1975-01-01

A technique for computer simulation of air combat is described. Volume 1 decribes the computer program and its development in general terms. Two versions of the program exist. Both incorporate a logic for selecting and executing air combat maneuvers with performance models of specific fighter aircraft. In the batch processing version the flight paths of two aircraft engaged in interactive aerial combat and controlled by the same logic are computed. The realtime version permits human pilots to fly air-to-air combat against the adaptive maneuvering logic (AML) in Langley Differential Maneuvering Simulator (DMS). Volume 2 consists of a detailed description of the computer programs.

The German version of the Anorectic Behavior Observation Scale (ABOS).

PubMed

Salbach-Andrae, Harriet; Klinkowski, Nora; Holzhausen, Martin; Frieler, Katja; Bohnekamp, Inga; Thiels, Cornelia; Bender, Caroline; Vandereycken, Walter

2009-05-01

To assess the performance of the German version of the Anorectic Behavior Observation Scale (ABOS) as a parent-report screening instrument for eating disorders (ED) in their children. Parents of 101 ED female patients (80 with Anorexia Nervosa; 21 with Bulimia Nervosa) and of 121 age- and socioeconomic status (SES)-matched female controls completed the ABOS. Confirmatory factor analysis supported the original three-factor structure model of the ABOS. Cronbach's alpha coefficients indicated good internal consistency for the three factors and the total score in the total sample. The best cut-off point (100% sensitivity and specificity) in the German version was >or=23. The ABOS may be a useful additional instrument for assessing ED.

Validation of English and Spanish-language versions of a screening questionnaire for rheumatoid arthritis in an underserved community.

PubMed

Potter, Jeffrey; Odutola, Jennifer; Gonzales, Christian Amurrio; Ward, Michael M

2008-08-01

Questionnaires to screen for rheumatoid arthritis (RA) have been tested in groups that were primarily well educated and Caucasian. We sought to validate the RA questions of the Connective Tissue Disease Screening Questionnaire (CSQ) in ethnic minorities in an underserved community, and to test a Spanish-language version. The Spanish-language version was developed by 2 native speakers. Consecutive English-speaking or Spanish-speaking patients in a community-based rheumatology practice completed the questionnaire. Diagnoses were confirmed by medical record review. Sensitivity and specificity of the questionnaire for a diagnosis of RA were computed for each language version, using 2 groups as controls: patients with noninflammatory conditions, and participants recruited from the community. The English-language version was tested in 53 patients with RA (79% ethnic minorities; mean education level 11.3 yrs), 85 rheumatology controls with noninflammatory conditions, and 82 community controls. Using 3 positive responses as indicating a positive screening test, the sensitivity of the questionnaire was 0.77, the specificity based on rheumatology controls was 0.45, and the specificity based on community controls was 0.94. The Spanish-language version was tested in 55 patients with RA (mean education level 7.8 yrs), 149 rheumatology controls, and 88 community controls. The sensitivity of the Spanish-language version was 0.87, with specificities of 0.60 and 0.97 using the rheumatology controls and community controls, respectively. The sensitivity of the English-language version of the RA questions of the CSQ was lower in this study than in other cohorts, reflecting differences in the performance of the questions in different ethnic or socioeconomic groups. The Spanish-language version demonstrated good sensitivity, and both had excellent specificity when tested in community controls.

Validation of Malaysian Versions of Perceived Diabetes Self-Management Scale (PDSMS), Medication Understanding and Use Self-Efficacy Scale (MUSE) and 8-Morisky Medication Adherence Scale (MMAS-8) Using Partial Credit Rasch Model.

PubMed

Al Abboud, Safaa Ahmed; Ahmad, Sohail; Bidin, Mohamed Badrulnizam Long; Ismail, Nahlah Elkudssiah

2016-11-01

The Diabetes Mellitus (DM) is a common silent epidemic disease with frequent morbidity and mortality. The psychological and psychosocial health factors are negatively influencing the glycaemic control in diabetic patients. Therefore, various questionnaires were developed to address the psychological and psychosocial well-being of the diabetic patients. Most of these questionnaires were first developed in English and then translated into different languages to make them useful for the local communities. The main aim of this study was to translate and validate the Malaysian versions of Perceived Diabetes Self-Management Scale (PDSMS), Medication Understanding and Use Self-Efficacy Scale (MUSE), and to revalidate 8-Morisky Medication Adherence Scale (MMAS-8) by Partial Credit Rasch Model (Modern Test Theory). Permission was obtained from respective authors to translate the English versions of PDSMS, MUSE and MMAS-8 into Malay language according to established standard international translation guidelines. In this cross-sectional study, 62 adult DM patients were recruited from Hospital Kuala Lumpur by purposive sampling method. The data were extracted from the self-administered questionnaires and entered manually in the Ministeps (Winsteps) software for Partial Credit Rasch Model. The item and person reliability, infit/outfit Z-Standard (ZSTD), infit/outfit Mean Square (MNSQ) and point measure correlation (PTMEA Corr) values were analysed for the reliability analyses and construct validation. The Malay version of PDSMS, MUSE and MMAS-8 found to be valid and reliable instrument for the Malaysian diabetic adults. The instrument showed good overall reliability value of 0.76 and 0.93 for item and person reliability, respectively. The values of infit/outfit ZSTD, infit/outfit MNSQ, and PTMEA Corr were also within the stipulated range of the Rasch Model proving the valid item constructs of the questionnaire. The translated Malay version of PDSMS, MUSE and MMAS-8 was found to be a highly reliable and valid questionnaire by Partial Credit Model. The Malay version was conceptually equivalent to original version, easy to understand and can be used for the Malaysian adult diabetic patients for future studies.

A comparison between two simulation models for spread of foot-and-mouth disease.

PubMed

Halasa, Tariq; Boklund, Anette; Stockmarr, Anders; Enøe, Claes; Christiansen, Lasse E

2014-01-01

Two widely used simulation models of foot-and-mouth disease (FMD) were used in order to compare the models' predictions in term of disease spread, consequence, and the ranking of the applied control strategies, and to discuss the effect of the way disease spread is modeled on the predicted outcomes of each model. The DTU-DADS (version 0.100), and ISP (version 2.001.11) were used to simulate a hypothetical spread of FMD in Denmark. Actual herd type, movements, and location data in the period 1st October 2006 and 30th September 2007 was used. The models simulated the spread of FMD using 3 different control scenarios: 1) A basic scenario representing EU and Danish control strategies, 2) pre-emptive depopulation of susceptible herds within a 500 meters radius around the detected herds, and 3) suppressive vaccination of susceptible herds within a 1,000 meters radius around the detected herds. Depopulation and vaccination started 14 days following the detection of the first infected herd. Five thousand index herds were selected randomly, of which there were 1,000 cattle herds located in high density cattle areas and 1,000 in low density cattle areas, 1,000 swine herds located in high density swine areas and 1,000 in low density swine areas, and 1,000 sheep herds. Generally, DTU-DADS predicted larger, longer duration and costlier epidemics than ISP, except when epidemics started in cattle herds located in high density cattle areas. ISP supported suppressive vaccination rather than pre-emptive depopulation, while DTU-DADS was indifferent to the alternative control strategies. Nonetheless, the absolute differences between control strategies were small making the choice of control strategy during an outbreak to be most likely based on practical reasons.

Integrated Farm System Model Version 4.3 and Dairy Gas Emissions Model Version 3.3 Software development and distribution

USDA-ARS?s Scientific Manuscript database

Modeling routines of the Integrated Farm System Model (IFSM version 4.2) and Dairy Gas Emission Model (DairyGEM version 3.2), two whole-farm simulation models developed and maintained by USDA-ARS, were revised with new components for: (1) simulation of ammonia (NH3) and greenhouse gas emissions gene...

An update to the Surface Ocean CO2 Atlas (SOCAT version 2)

NASA Astrophysics Data System (ADS)

Bakker, D. C. E.; Pfeil, B.; Smith, K.; Hankin, S.; Olsen, A.; Alin, S. R.; Cosca, C.; Harasawa, S.; Kozyr, A.; Nojiri, Y.; O'Brien, K. M.; Schuster, U.; Telszewski, M.; Tilbrook, B.; Wada, C.; Akl, J.; Barbero, L.; Bates, N.; Boutin, J.; Cai, W.-J.; Castle, R. D.; Chavez, F. P.; Chen, L.; Chierici, M.; Currie, K.; de Baar, H. J. W.; Evans, W.; Feely, R. A.; Fransson, A.; Gao, Z.; Hales, B.; Hardman-Mountford, N.; Hoppema, M.; Huang, W.-J.; Hunt, C. W.; Huss, B.; Ichikawa, T.; Johannessen, T.; Jones, E. M.; Jones, S. D.; Jutterström, S.; Kitidis, V.; Körtzinger, A.; Landschtzer, P.; Lauvset, S. K.; Lefèvre, N.; Manke, A. B.; Mathis, J. T.; Merlivat, L.; Metzl, N.; Murata, A.; Newberger, T.; Ono, T.; Park, G.-H.; Paterson, K.; Pierrot, D.; Ríos, A. F.; Sabine, C. L.; Saito, S.; Salisbury, J.; Sarma, V. V. S. S.; Schlitzer, R.; Sieger, R.; Skjelvan, I.; Steinhoff, T.; Sullivan, K.; Sun, H.; Sutton, A. J.; Suzuki, T.; Sweeney, C.; Takahashi, T.; Tjiputra, J.; Tsurushima, N.; van Heuven, S. M. A. C.; Vandemark, D.; Vlahos, P.; Wallace, D. W. R.; Wanninkhof, R.; Watson, A. J.

2013-08-01

The Surface Ocean CO2 Atlas (SOCAT) is an effort by the international marine carbon research community. It aims to improve access to carbon dioxide measurements in the surface oceans by regular releases of quality controlled and fully documented synthesis and gridded fCO2 (fugacity of carbon dioxide) products. SOCAT version 2 presented here extends the data set for the global oceans and coastal seas by four years and has 10.1 million surface water fCO2 values from 2660 cruises between 1968 and 2011. The procedures for creating version 2 have been comparable to those for version 1. The SOCAT website (http://www.socat.info/) provides access to the individual cruise data files, as well as to the synthesis and gridded data products. Interactive online tools allow visitors to explore the richness of the data. Scientific users can also retrieve the data as downloadable files or via Ocean Data View. Version 2 enables carbon specialists to expand their studies until 2011. Applications of SOCAT include process studies, quantification of the ocean carbon sink and its spatial, seasonal, year-to-year and longer-term variation, as well as initialisation or validation of ocean carbon models and coupled-climate carbon models.

Geodesy- and geology-based slip-rate models for the Western United States (excluding California) national seismic hazard maps

USGS Publications Warehouse

Petersen, Mark D.; Zeng, Yuehua; Haller, Kathleen M.; McCaffrey, Robert; Hammond, William C.; Bird, Peter; Moschetti, Morgan; Shen, Zhengkang; Bormann, Jayne; Thatcher, Wayne

2014-01-01

The 2014 National Seismic Hazard Maps for the conterminous United States incorporate additional uncertainty in fault slip-rate parameter that controls the earthquake-activity rates than was applied in previous versions of the hazard maps. This additional uncertainty is accounted for by new geodesy- and geology-based slip-rate models for the Western United States. Models that were considered include an updated geologic model based on expert opinion and four combined inversion models informed by both geologic and geodetic input. The two block models considered indicate significantly higher slip rates than the expert opinion and the two fault-based combined inversion models. For the hazard maps, we apply 20 percent weight with equal weighting for the two fault-based models. Off-fault geodetic-based models were not considered in this version of the maps. Resulting changes to the hazard maps are generally less than 0.05 g (acceleration of gravity). Future research will improve the maps and interpret differences between the new models.

Implementing parallel spreadsheet models for health policy decisions: The impact of unintentional errors on model projections

PubMed Central

Bailey, Stephanie L.; Bono, Rose S.; Nash, Denis; Kimmel, April D.

2018-01-01

Background Spreadsheet software is increasingly used to implement systems science models informing health policy decisions, both in academia and in practice where technical capacity may be limited. However, spreadsheet models are prone to unintentional errors that may not always be identified using standard error-checking techniques. Our objective was to illustrate, through a methodologic case study analysis, the impact of unintentional errors on model projections by implementing parallel model versions. Methods We leveraged a real-world need to revise an existing spreadsheet model designed to inform HIV policy. We developed three parallel versions of a previously validated spreadsheet-based model; versions differed by the spreadsheet cell-referencing approach (named single cells; column/row references; named matrices). For each version, we implemented three model revisions (re-entry into care; guideline-concordant treatment initiation; immediate treatment initiation). After standard error-checking, we identified unintentional errors by comparing model output across the three versions. Concordant model output across all versions was considered error-free. We calculated the impact of unintentional errors as the percentage difference in model projections between model versions with and without unintentional errors, using +/-5% difference to define a material error. Results We identified 58 original and 4,331 propagated unintentional errors across all model versions and revisions. Over 40% (24/58) of original unintentional errors occurred in the column/row reference model version; most (23/24) were due to incorrect cell references. Overall, >20% of model spreadsheet cells had material unintentional errors. When examining error impact along the HIV care continuum, the percentage difference between versions with and without unintentional errors ranged from +3% to +16% (named single cells), +26% to +76% (column/row reference), and 0% (named matrices). Conclusions Standard error-checking techniques may not identify all errors in spreadsheet-based models. Comparing parallel model versions can aid in identifying unintentional errors and promoting reliable model projections, particularly when resources are limited. PMID:29570737

Implementing parallel spreadsheet models for health policy decisions: The impact of unintentional errors on model projections.

PubMed

Bailey, Stephanie L; Bono, Rose S; Nash, Denis; Kimmel, April D

2018-01-01

Spreadsheet software is increasingly used to implement systems science models informing health policy decisions, both in academia and in practice where technical capacity may be limited. However, spreadsheet models are prone to unintentional errors that may not always be identified using standard error-checking techniques. Our objective was to illustrate, through a methodologic case study analysis, the impact of unintentional errors on model projections by implementing parallel model versions. We leveraged a real-world need to revise an existing spreadsheet model designed to inform HIV policy. We developed three parallel versions of a previously validated spreadsheet-based model; versions differed by the spreadsheet cell-referencing approach (named single cells; column/row references; named matrices). For each version, we implemented three model revisions (re-entry into care; guideline-concordant treatment initiation; immediate treatment initiation). After standard error-checking, we identified unintentional errors by comparing model output across the three versions. Concordant model output across all versions was considered error-free. We calculated the impact of unintentional errors as the percentage difference in model projections between model versions with and without unintentional errors, using +/-5% difference to define a material error. We identified 58 original and 4,331 propagated unintentional errors across all model versions and revisions. Over 40% (24/58) of original unintentional errors occurred in the column/row reference model version; most (23/24) were due to incorrect cell references. Overall, >20% of model spreadsheet cells had material unintentional errors. When examining error impact along the HIV care continuum, the percentage difference between versions with and without unintentional errors ranged from +3% to +16% (named single cells), +26% to +76% (column/row reference), and 0% (named matrices). Standard error-checking techniques may not identify all errors in spreadsheet-based models. Comparing parallel model versions can aid in identifying unintentional errors and promoting reliable model projections, particularly when resources are limited.

Evaluation of some significant issues affecting trajectory and control management for air-breathing hypersonic vehicles

NASA Technical Reports Server (NTRS)

Hattis, Philip D.; Malchow, Harvey L.

1992-01-01

Horizontal takeoff airbreathing-propulsion launch vehicles require near-optimal guidance and control which takes into account performance sensitivities to atmospheric characteristics while satisfying physically-derived operational constraints. A generic trajectory/control analysis tool that deepens insight into these considerations has been applied to two versions of a winged-cone vehicle model. Information that is critical to the design and trajectory of these vehicles is derived, and several unusual characteristics of the airbreathing propulsion model are shown to have potentially substantial effects on vehicle dynamics.

Developmental assessment of the Fort St. Vrain version of the Composite HTGR Analysis Program (CHAP-2)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Stroh, K.R.

1980-01-01

The Composite HTGR Analysis Program (CHAP) consists of a model-independent systems analysis mainframe named LASAN and model-dependent linked code modules, each representing a component, subsystem, or phenomenon of an HTGR plant. The Fort St. Vrain (FSV) version (CHAP-2) includes 21 coded modules that model the neutron kinetics and thermal response of the core; the thermal-hydraulics of the reactor primary coolant system, secondary steam supply system, and balance-of-plant; the actions of the control system and plant protection system; the response of the reactor building; and the relative hazard resulting from fuel particle failure. FSV steady-state and transient plant data are beingmore » used to partially verify the component modeling and dynamic smulation techniques used to predict plant response to postulated accident sequences.« less

CERT Resilience Management Model, Version 1.0

DTIC Science & Technology

2010-05-01

practice such as ISO 27000 , COBIT, or ITIL. If you are a member of an established process improvement community, particularly one centered on CMMI...Systems Audit and Control Association ISO International Organization for Standardization ISSA Information Systems Security Association IT

Validation of a Spanish-language version of the ADHD Rating Scale IV in a Spanish sample.

PubMed

Vallejo-Valdivielso, M; Soutullo, C A; de Castro-Manglano, P; Marín-Méndez, J J; Díez-Suárez, A

2017-07-14

The purpose of this study is to validate a Spanish-language version of the 18-item ADHD Rating Scale-IV (ADHD-RS-IV.es) in a Spanish sample. From a total sample of 652 children and adolescents aged 6 to 17 years (mean age was 11.14±3.27), we included 518 who met the DSM-IV-TR criteria for ADHD and 134 healthy controls. To evaluate the factorial structure, validity, and reliability of the scale, we performed a confirmatory factor analysis (CFA) using structural equation modelling on a polychoric correlation matrix and maximum likelihood estimation. The scale's discriminant validity and predictive value were estimated using ROC (receiver operating characteristics) curve analysis. Both the full scale and the subscales of the Spanish-language version of the ADHD-RS-IV showed good internal consistency. Cronbach's alpha was 0.94 for the full scale and ≥ 0.90 for the subscales, and ordinal alpha was 0.95 and ≥ 0.90, respectively. CFA showed that a two-factor model (inattention and hyperactivity/impulsivity) provided the best fit for the data. ADHD-RS-IV.es offered good discriminant ability to distinguish between patients with ADHD and controls (AUC=0.97). The two-factor structure of the Spanish-language version of the ADHD-RS-IV (ADHD-RS-IV.es) is consistent with those of the DSM-IV-TR and DSM-5 as well as with the model proposed by the author of the original scale. Furthermore, it has good discriminant ability. ADHD-RS-IV.es is therefore a valid and reliable tool for determining presence and severity of ADHD symptoms in the Spanish population. Copyright © 2017 Sociedad Española de Neurología. Publicado por Elsevier España, S.L.U. All rights reserved.

Combined monitoring, decision and control model for the human operator in a command and control desk

NASA Technical Reports Server (NTRS)

Muralidharan, R.; Baron, S.

1978-01-01

A report is given on the ongoing efforts to mode the human operator in the context of the task during the enroute/return phases in the ground based control of multiple flights of remotely piloted vehicles (RPV). The approach employed here uses models that have their analytical bases in control theory and in statistical estimation and decision theory. In particular, it draws heavily on the modes and the concepts of the optimal control model (OCM) of the human operator. The OCM is being extended into a combined monitoring, decision, and control model (DEMON) of the human operator by infusing decision theoretic notions that make it suitable for application to problems in which human control actions are infrequent and in which monitoring and decision-making are the operator's main activities. Some results obtained with a specialized version of DEMON for the RPV control problem are included.

AEOSS runtime manual for system analysis on Advanced Earth-Orbital Spacecraft Systems

NASA Technical Reports Server (NTRS)

Lee, Hwa-Ping

1990-01-01

Advanced earth orbital spacecraft system (AEOSS) enables users to project the required power, weight, and cost for a generic earth-orbital spacecraft system. These variables are calculated on the component and subsystem levels, and then the system level. The included six subsystems are electric power, thermal control, structure, auxiliary propulsion, attitude control, and communication, command, and data handling. The costs are computed using statistically determined models that were derived from the flown spacecraft in the past and were categorized into classes according to their functions and structural complexity. Selected design and performance analyses for essential components and subsystems are also provided. AEOSS has the feature permitting a user to enter known values of these parameters, totally and partially, at all levels. All information is of vital importance to project managers of subsystems or a spacecraft system. AEOSS is a specially tailored software coded from the relational database program of the Acius' 4th Dimension with a Macintosh version. Because of the licensing agreements, two versions of the AEOSS documents were prepared. This version, AEOSS Runtime Manual, is permitted to be distributed with a finite number of the restrictive 4D Runtime version. It can perform all contained applications without any programming alterations.

Specious causal attributions in the social sciences: the reformulated stepping-stone theory of heroin use as exemplar.

PubMed

Baumrind, D

1983-12-01

The claims based on causal models employing either statistical or experimental controls are examined and found to be excessive when applied to social or behavioral science data. An exemplary case, in which strong causal claims are made on the basis of a weak version of the regularity model of cause, is critiqued. O'Donnell and Clayton claim that in order to establish that marijuana use is a cause of heroin use (their "reformulated stepping-stone" hypothesis), it is necessary and sufficient to demonstrate that marijuana use precedes heroin use and that the statistically significant association between the two does not vanish when the effects of other variables deemed to be prior to both of them are removed. I argue that O'Donnell and Clayton's version of the regularity model is not sufficient to establish cause and that the planning of social interventions both presumes and requires a generative rather than a regularity causal model. Causal modeling using statistical controls is of value when it compels the investigator to make explicit and to justify a causal explanation but not when it is offered as a substitute for a generative analysis of causal connection.

Adaptive Interfaces

DTIC Science & Technology

1990-11-01

to design and implement an adaptive intelligent interface for a command-and-control-style domain. The primary functionality of the resulting...technical tasks, as follows: 1. Analysis of Current Interface Technologies 2. Dejineation of User Roles 3. Development of User Models 4. Design of Interface...Management Association (FEMA). In the initial version of the prototype, two distin-t user models were designed . One type of user modeled by the system is

Modelling Size Structured Food Webs Using a Modified Niche Model with Two Predator Traits

PubMed Central

Klecka, Jan

2014-01-01

The structure of food webs is frequently described using phenomenological stochastic models. A prominent example, the niche model, was found to produce artificial food webs resembling real food webs according to a range of summary statistics. However, the size structure of food webs generated by the niche model and real food webs has not yet been rigorously compared. To fill this void, I use a body mass based version of the niche model and compare prey-predator body mass allometry and predator-prey body mass ratios predicted by the model to empirical data. The results show that the model predicts weaker size structure than observed in many real food webs. I introduce a modified version of the niche model which allows to control the strength of size-dependence of predator-prey links. In this model, optimal prey body mass depends allometrically on predator body mass and on a second trait, such as foraging mode. These empirically motivated extensions of the model allow to represent size structure of real food webs realistically and can be used to generate artificial food webs varying in several aspects of size structure in a controlled way. Hence, by explicitly including the role of species traits, this model provides new opportunities for simulating the consequences of size structure for food web dynamics and stability. PMID:25119999

Reproducibility and Transparency in Ocean-Climate Modeling

NASA Astrophysics Data System (ADS)

Hannah, N.; Adcroft, A.; Hallberg, R.; Griffies, S. M.

2015-12-01

Reproducibility is a cornerstone of the scientific method. Within geophysical modeling and simulation achieving reproducibility can be difficult, especially given the complexity of numerical codes, enormous and disparate data sets, and variety of supercomputing technology. We have made progress on this problem in the context of a large project - the development of new ocean and sea ice models, MOM6 and SIS2. Here we present useful techniques and experience.We use version control not only for code but the entire experiment working directory, including configuration (run-time parameters, component versions), input data and checksums on experiment output. This allows us to document when the solutions to experiments change, whether due to code updates or changes in input data. To avoid distributing large input datasets we provide the tools for generating these from the sources, rather than provide raw input data.Bugs can be a source of non-determinism and hence irreproducibility, e.g. reading from or branching on uninitialized memory. To expose these we routinely run system tests, using a memory debugger, multiple compilers and different machines. Additional confidence in the code comes from specialised tests, for example automated dimensional analysis and domain transformations. This has entailed adopting a code style where we deliberately restrict what a compiler can do when re-arranging mathematical expressions.In the spirit of open science, all development is in the public domain. This leads to a positive feedback, where increased transparency and reproducibility makes using the model easier for external collaborators, who in turn provide valuable contributions. To facilitate users installing and running the model we provide (version controlled) digital notebooks that illustrate and record analysis of output. This has the dual role of providing a gross, platform-independent, testing capability and a means to documents model output and analysis.

Overview and Evaluation of the Community Multiscale Air Quality (CMAQ) Modeling System Version 5.2

EPA Science Inventory

A new version of the Community Multiscale Air Quality (CMAQ) model, version 5.2 (CMAQv5.2), is currently being developed, with a planned release date in 2017. The new model includes numerous updates from the previous version of the model (CMAQv5.1). Specific updates include a new...

Using Rasch-models to compare the 30-, 20-, and 12-items version of the general health questionnaire taking four recoding schemes into account.

PubMed

Alexandrowicz, Rainer W; Friedrich, Fabian; Jahn, Rebecca; Soulier, Nathalie

2015-01-01

The present study compares the 30-, 20-, and 12-items versions of the General Health Questionnaire (GHQ) in the original coding and four different recoding schemes (Bimodal, Chronic, Modified Likert and a newly proposed Modified Chronic) with respect to their psychometric qualities. The dichotomized versions (i.e. Bimodal, Chronic and Modified Chronic) were evaluated with the Rasch-Model and the polytomous original version and the Modified Likert version were evaluated with the Partial Credit Model. In general, the versions under consideration showed agreement with the model assumption. However, the recoded versions exhibited some deficits with respect to the Outfit index. Because of the item deficits and for theoretical reasons we argue in favor of using the any of the three length versions with the original four-categorical coding scheme. Nevertheless, any of the versions appears apt for clinical use from a psychometric perspective.

The Role of User Control in Adherence to and Knowledge Gained from a Website: Randomized Comparison Between a Tunneled Version and a Freedom-of-Choice Version

PubMed Central

Cyr, Dianne; de Vries, Nanne K

2012-01-01

Background Internet-delivered interventions can effectively change health risk behaviors and their determinants, but adherence to these interventions once they are accessed is very low. Therefore, it is relevant and necessary to systematically manipulate website characteristics to test their effect on website use. This study focuses on user control as a website characteristic. Objective To test whether and how user control (the freedom of choice to skip pages) can increase website use and knowledge gained from the website. Methods Participants older than 18 years were drawn from the Dutch Internet population (in June 2011) and completed a hepatitis knowledge questionnaire. Subsequently, they were randomly assigned to three groups: (1) a tunneled version of the website with less user control; (2) a high user control version of the website where visitors had the freedom of choice to skip pages; and (3) a control group that was not exposed to the website. Participants completed (1) a questionnaire of validated measures regarding user perceptions immediately after exposure to the website (except for the control group), and (2) a hepatitis knowledge questionnaire after one week to test whether participants in the experimental groups only clicked through the website or actually processed and learned its content. Server registrations were used to assess website use. Analyses of covariance (ANCOVA) using all available data were conducted to determine whether user control increases website use. Structural equation models (SEM) using all available data were constructed to test how user control increases website use—a latent variable derived from number of pages visited and time on website. Results Of the 1044 persons invited to participate, 668 took part (668/1044, 64.0%). One half of participants (332/668 49.7%) were female and the mean age was 49 years (SD 16). A total of 571 participants completed the one-week follow-up measure regarding hepatitis knowledge (571/668, 85.5%). The findings demonstrate that having less user control (ie, a tunneled version of the website) had a negative effect on users’ perception of efficiency (F1,452 = 97.69, P < .001), but a positive effect on number of pages visited (F1,452 = 171.49, P < .001), time on the website (F1,452 = 6.32, P = .01), and knowledge gained from the website (F1,452 = 134.32, P < .001). The direct effect of having less user control appeared to surpass the effect mediated by efficiency, because website use was higher among participants exposed to the tunneled version of the website in comparison with those having the freedom of choice to skip pages. Conclusions The key finding that visitors demonstrated increased website use in the tunneled version of the website indicates that visitors should be carefully guided through the intervention for future intervention websites. PMID:22532074

A Comparison between Two Simulation Models for Spread of Foot-and-Mouth Disease

PubMed Central

Halasa, Tariq; Boklund, Anette; Stockmarr, Anders; Enøe, Claes; Christiansen, Lasse E.

2014-01-01

Two widely used simulation models of foot-and-mouth disease (FMD) were used in order to compare the models’ predictions in term of disease spread, consequence, and the ranking of the applied control strategies, and to discuss the effect of the way disease spread is modeled on the predicted outcomes of each model. The DTU-DADS (version 0.100), and ISP (version 2.001.11) were used to simulate a hypothetical spread of FMD in Denmark. Actual herd type, movements, and location data in the period 1st October 2006 and 30th September 2007 was used. The models simulated the spread of FMD using 3 different control scenarios: 1) A basic scenario representing EU and Danish control strategies, 2) pre-emptive depopulation of susceptible herds within a 500 meters radius around the detected herds, and 3) suppressive vaccination of susceptible herds within a 1,000 meters radius around the detected herds. Depopulation and vaccination started 14 days following the detection of the first infected herd. Five thousand index herds were selected randomly, of which there were 1,000 cattle herds located in high density cattle areas and 1,000 in low density cattle areas, 1,000 swine herds located in high density swine areas and 1,000 in low density swine areas, and 1,000 sheep herds. Generally, DTU-DADS predicted larger, longer duration and costlier epidemics than ISP, except when epidemics started in cattle herds located in high density cattle areas. ISP supported suppressive vaccination rather than pre-emptive depopulation, while DTU-DADS was indifferent to the alternative control strategies. Nonetheless, the absolute differences between control strategies were small making the choice of control strategy during an outbreak to be most likely based on practical reasons. PMID:24667525

Management and control of self-replicating systems: A systems model

NASA Technical Reports Server (NTRS)

Vontiesenhausen, G.

1982-01-01

In 1980, a conceptual engineering approach to self-replicating systems was achieved. The design was based on von Newmann's kinematic version of self-replicating automata. The systems management and control and the organization of the control elements are reported. After developing the functional requirements of such a system, a hierarchy of three management and control levels is described. These are an autonomous, an external, and an intelligent management and control system. Systems recycling, systems specialization, and information replication are discussed.

Effect of regional anesthesia on the success rate of external cephalic version: a systematic review and meta-analysis.

PubMed

Goetzinger, Katherine R; Harper, Lorie M; Tuuli, Methodius G; Macones, George A; Colditz, Graham A

2011-11-01

To estimate whether the use of regional anesthesia is associated with increased success of external cephalic version. We searched MEDLINE, EMBASE, the Cochrane Library, and clinical trial registries. Electronic databases were searched from 1966 through April 2011 for published, randomized controlled trials in the English language comparing regional anesthesia with no regional anesthesia for external cephalic version. The primary outcome was external cephalic version success. Secondary outcomes included cesarean delivery, maternal discomfort, and adverse events. Pooled risk ratios (relative risk) were calculated using a random-effects model. Heterogeneity was assessed using the Cochran's Q statistic and quantified using the I Z method. Six randomized controlled trials met criteria for study inclusion. Regional anesthesia was associated with a higher external cephalic version success rate compared with intravenous or no analgesia (59.7% compared with 37.6%; pooled relative risk 1.58; 95% confidence interval [CI] 1.29-1.93). This significant association persisted when the data were stratified by type of regional anesthesia (spinal compared with epidural). The number needed to treat with regional anesthesia to achieve one additional successful external cephalic version was five. There was no evidence of statistical heterogeneity (P=.32, I Z=14.9%) or publication bias (Harbord test P=.78). There was no statistically significant difference in the risk of cesarean delivery comparing regional anesthesia with intravenous or no analgesia (48.4% compared with 59.3%; pooled relative risk 0.80; 95% CI 0.55-1.17). Adverse events were rare and not significantly different between the two groups. Regional anesthesia is associated with a higher success rate of external cephalic version.

Evaluating the Maturity of Cybersecurity Programs for Building Control Systems

DOE Office of Scientific and Technical Information (OSTI.GOV)

Glantz, Clifford S.; Somasundaram, Sriram; Mylrea, Michael E.

The cyber-physical security threat to buildings is complex, non-linear, and rapidly evolving as operational and information technologies converge and connect buildings to cyberspace. Cyberattacks on buildings can exploit smart building controls and breach corporate networks, causing financial and reputational damage. This may result in the loss of sensitive building information or the disruption of, or damage to, the systems necessary for the safe and efficient operation of buildings. For the buildings and facility infrastructure, there is a need for a robust national cybersecurity strategy for buildings, guidance on the selection and implementation of appropriate cybersecurity controls for buildings, an approachmore » to evaluate the maturity and adequacy of the cybersecurity programs. To provide an approach for evaluating the maturity of the cybersecurity programs for building control systems, the US Department of Energy’s widely used Cybersecurity Capability and Maturity Model (C2M2) has been adapted into a building control systems version. The revised model, the Buildings-C2M2 (B-C2M2) provides maturity level indicators for cybersecurity programmatic domains. A “B-C2M2 Lite” version allows facility managers and building control system engineers, or information technology personnel to perform rapid self-assessments of their cybersecurity program. Both tools have been pilot tested on several facilities. This paper outlines the concept of a maturity model, describes the B-C2M2 tools, presents results and observations from the pilot assessments, and lays out plans for future work.« less

The CO5 configuration of the 7 km Atlantic Margin Model: large-scale biases and sensitivity to forcing, physics options and vertical resolution

NASA Astrophysics Data System (ADS)

O'Dea, Enda; Furner, Rachel; Wakelin, Sarah; Siddorn, John; While, James; Sykes, Peter; King, Robert; Holt, Jason; Hewitt, Helene

2017-08-01

We describe the physical model component of the standard Coastal Ocean version 5 configuration (CO5) of the European north-west shelf (NWS). CO5 was developed jointly between the Met Office and the National Oceanography Centre. CO5 is designed with the seamless approach in mind, which allows for modelling of multiple timescales for a variety of applications from short-range ocean forecasting to climate projections. The configuration constitutes the basis of the latest update to the ocean and data assimilation components of the Met Office's operational Forecast Ocean Assimilation Model (FOAM) for the NWS. A 30.5-year non-assimilating control hindcast of CO5 was integrated from January 1981 to June 2012. Sensitivity simulations were conducted with reference to the control run. The control run is compared against a previous non-assimilating Proudman Oceanographic Laboratory Coastal Ocean Modelling System (POLCOMS) hindcast of the NWS. The CO5 control hindcast is shown to have much reduced biases compared to POLCOMS. Emphasis in the system description is weighted to updates in CO5 over previous versions. Updates include an increase in vertical resolution, a new vertical coordinate stretching function, the replacement of climatological riverine sources with the pan-European hydrological model E-HYPE, a new Baltic boundary condition and switching from directly imposed atmospheric model boundary fluxes to calculating the fluxes within the model using a bulk formula. Sensitivity tests of the updates are detailed with a view toward attributing observed changes in the new system from the previous system and suggesting future directions of research to further improve the system.

User's guide to PHREEQC (Version 2) : a computer program for speciation, batch-reaction, one-dimensional transport, and inverse geochemical calculations

USGS Publications Warehouse

Parkhurst, David L.; Appelo, C.A.J.

1999-01-01

PHREEQC version 2 is a computer program written in the C programming language that is designed to perform a wide variety of low-temperature aqueous geochemical calculations. PHREEQC is based on an ion-association aqueous model and has capabilities for (1) speciation and saturation-index calculations; (2) batch-reaction and one-dimensional (1D) transport calculations involving reversible reactions, which include aqueous, mineral, gas, solid-solution, surface-complexation, and ion-exchange equilibria, and irreversible reactions, which include specified mole transfers of reactants, kinetically controlled reactions, mixing of solutions, and temperature changes; and (3) inverse modeling, which finds sets of mineral and gas mole transfers that account for differences in composition between waters, within specified compositional uncertainty limits.New features in PHREEQC version 2 relative to version 1 include capabilities to simulate dispersion (or diffusion) and stagnant zones in 1D-transport calculations, to model kinetic reactions with user-defined rate expressions, to model the formation or dissolution of ideal, multicomponent or nonideal, binary solid solutions, to model fixed-volume gas phases in addition to fixed-pressure gas phases, to allow the number of surface or exchange sites to vary with the dissolution or precipitation of minerals or kinetic reactants, to include isotope mole balances in inverse modeling calculations, to automatically use multiple sets of convergence parameters, to print user-defined quantities to the primary output file and (or) to a file suitable for importation into a spreadsheet, and to define solution compositions in a format more compatible with spreadsheet programs. This report presents the equations that are the basis for chemical equilibrium, kinetic, transport, and inverse-modeling calculations in PHREEQC; describes the input for the program; and presents examples that demonstrate most of the program's capabilities.

Performance of Versions 1,2 and 3 of the Goddard Earth Observing System (GEOS) Chemistry-Climate Model (CCM)

NASA Technical Reports Server (NTRS)

Pawson, Steven; Stolarski, Richard S.; Nielsen, J. Eric; Duncan, Bryan N.

2008-01-01

Version 1 of the Goddard Earth Observing System Chemistry-Climate Model (GEOS CCM) was used in the first CCMVa1 model evaluation and forms the basis for several studies of links between ozone and the circulation. That version of the CCM was based on the GEOS-4 GCM. Versions 2 and 3 of the GEOS CCM are based on the GEOS-5 GCM, which retains the "Lin-Rood" dynamical core but has a totally different set of physical parameterizatiOns to GEOS-4. In Version 2 of the GEOS CCM the Goddard stratospheric chemistry module is retained. Difference between Versions 1 and 2 thus reflect the physics changes of the underlying GCMs. Several comparisons between these two models are made, several of which reveal improvements in Version 2 (including a more realistic representation of the interannual variability of the Antarctic vortex). In Version 3 of the GEOS CCM, the stratospheric chemistry mechanism is replaced by the "GMI COMBO" code that includes tropospheric chemistry and different computational approaches. An advantage of this model version. is the reduction of high ozone biases that prevail at low chlorine loadings in Versions 1 and 2. This poster will compare and contrast various aspects of the three model versions that are relevant for understanding interactions between ozone and climate.

Is job a viable unit of analysis? A multilevel analysis of demand-control-support models.

PubMed

Morrison, David; Payne, Roy L; Wall, Toby D

2003-07-01

The literature has ignored the fact that the demand-control (DC) and demand-control-support (DCS) models of stress are about jobs and not individuals' perceptions of their jobs. Using multilevel modeling, the authors report results of individual- and job-level analyses from a study of over 6,700 people in 81 different jobs. Support for additive versions of the models came when individuals were the unit of analysis. DC and DCS models are only helpful for understanding the effects of individual perceptions of jobs and their relationship to psychological states. When job perceptions are aggregated and their relationship to the collective experience of jobholders is assessed, the models prove of little value. Role set may be a better unit of analysis.

Version control system of CAD documents and PLC projects

NASA Astrophysics Data System (ADS)

Khudyakov, P. Yu; Kisel’nikov, A. Yu; Startcev, I. M.; Kovalev, A. A.

2018-05-01

The paper presents the process of developing a version control system for CAD documents and PLC projects. The software was tested and the optimal composition of the modules was selected. The introduction of the system has made it possible to increase the safety and stability of the process control systems, as well as to reduce the number of conflicts for versions of CAD files. The number of incidents at the enterprise related to the use of incorrect versions of PLC projects is reduced to 0.

Optimisation of strain selection in evolutionary continuous culture

NASA Astrophysics Data System (ADS)

Bayen, T.; Mairet, F.

2017-12-01

In this work, we study a minimal time control problem for a perfectly mixed continuous culture with n ≥ 2 species and one limiting resource. The model that we consider includes a mutation factor for the microorganisms. Our aim is to provide optimal feedback control laws to optimise the selection of the species of interest. Thanks to Pontryagin's Principle, we derive optimality conditions on optimal controls and introduce a sub-optimal control law based on a most rapid approach to a singular arc that depends on the initial condition. Using adaptive dynamics theory, we also study a simplified version of this model which allows to introduce a near optimal strategy.

Adaptive control of a jet turboshaft engine driving a variable pitch propeller using multiple models

NASA Astrophysics Data System (ADS)

Ahmadian, Narjes; Khosravi, Alireza; Sarhadi, Pouria

2017-08-01

In this paper, a multiple model adaptive control (MMAC) method is proposed for a gas turbine engine. The model of a twin spool turbo-shaft engine driving a variable pitch propeller includes various operating points. Variations in fuel flow and propeller pitch inputs produce different operating conditions which force the controller to be adopted rapidly. Important operating points are three idle, cruise and full thrust cases for the entire flight envelope. A multi-input multi-output (MIMO) version of second level adaptation using multiple models is developed. Also, stability analysis using Lyapunov method is presented. The proposed method is compared with two conventional first level adaptation and model reference adaptive control techniques. Simulation results for JetCat SPT5 turbo-shaft engine demonstrate the performance and fidelity of the proposed method.

New Global Bathymetry and Topography Model Grids

NASA Astrophysics Data System (ADS)

Smith, W. H.; Sandwell, D. T.; Marks, K. M.

2008-12-01

A new version of the "Smith and Sandwell" global marine topography model is available in two formats. A one-arc-minute Mercator projected grid covering latitudes to +/- 80.738 degrees is available in the "img" file format. Also available is a 30-arc-second version in latitude and longitude coordinates from pole to pole, supplied as tiles covering the same areas as the SRTM30 land topography data set. The new effort follows the Smith and Sandwell recipe, using publicly available and quality controlled single- and multi-beam echo soundings where possible and filling the gaps in the oceans with estimates derived from marine gravity anomalies observed by satellite altimetry. The altimeter data have been reprocessed to reduce the noise level and improve the spatial resolution [see Sandwell and Smith, this meeting]. The echo soundings database has grown enormously with new infusions of data from the U.S. Naval Oceanographic Office (NAVO), the National Geospatial-intelligence Agency (NGA), hydrographic offices around the world volunteering through the International Hydrographic Organization (IHO), and many other agencies and academic sources worldwide. These new data contributions have filled many holes: 50% of ocean grid points are within 8 km of a sounding point, 75% are within 24 km, and 90% are within 57 km. However, in the remote ocean basins some gaps still remain: 5% of the ocean grid points are more than 85 km from the nearest sounding control, and 1% are more than 173 km away. Both versions of the grid include a companion grid of source file numbers, so that control points may be mapped and traced to sources. We have compared the new model to multi-beam data not used in the compilation and find that 50% of differences are less than 25 m, 95% of differences are less than 130 m, but a few large differences remain in areas of poor sounding control and large-amplitude gravity anomalies. Land values in the solution are taken from SRTM30v2, GTOPO30 and ICESAT data. GEBCO has agreed to adopt this model and begin updating it in 2009. Ongoing tasks include building an uncertainty model and including information from the latest IBCAO map of the Arctic Ocean.

Transonic control effectiveness for full and partial span elevon configurations on a 0.0165 scale model space shuttle orbiter tested in the LaRC 8-foot transonic wind tunnel (LA48)

NASA Technical Reports Server (NTRS)

1977-01-01

A transonic pressure tunnel test is reported on an early version of the space shuttle orbiter (designated 089B-139) 0.0165 scale model to systematically determine both longitudinal and lateral control effectiveness associated with various combinations of inboard, outboard, and full span wing trailing edge controls. The test was conducted over a Mach number range from 0.6 to 1.08 at angles of attack from -2 deg to 23 deg at 0 deg sideslip.

Predictive Rotation Profile Control for the DIII-D Tokamak

NASA Astrophysics Data System (ADS)

Wehner, W. P.; Schuster, E.; Boyer, M. D.; Walker, M. L.; Humphreys, D. A.

2017-10-01

Control-oriented modeling and model-based control of the rotation profile are employed to build a suitable control capability for aiding rotation-related physics studies at DIII-D. To obtain a control-oriented model, a simplified version of the momentum balance equation is combined with empirical representations of the momentum sources. The control approach is rooted in a Model Predictive Control (MPC) framework to regulate the rotation profile while satisfying constraints associated with the desired plasma stored energy and/or βN limit. Simple modifications allow for alternative control objectives, such as maximizing the plasma rotation while maintaining a specified input torque. Because the MPC approach can explicitly incorporate various types of constraints, this approach is well suited to a variety of control objectives, and therefore serves as a valuable tool for experimental physics studies. Closed-loop TRANSP simulations are presented to demonstrate the effectiveness of the control approach. Supported by the US DOE under DE-SC0010661 and DE-FC02-04ER54698.

KSC-2012-5046

NASA Image and Video Library

2012-09-13

CAPE CANAVERAL, Fla. – Reporters look over a model of the Shuttle Carrier Aircraft, or SCA, and a space shuttle during a tour of the real Shuttle Carrier Aircraft. The model is a radio-controlled scale version of the modified 747 that was used to test theories for how the space shuttle would separate from the SCA during approach and landing tests. Photo credit: NASA/Kim Shiflett

KSC-2012-5047

NASA Image and Video Library

2012-09-13

CAPE CANAVERAL, Fla. – A visitor looks over a model of the Shuttle Carrier Aircraft, or SCA, and a space shuttle during a tour of the real Shuttle Carrier Aircraft. The model is a radio-controlled scale version of the modified 747 that was used to test theories for how the space shuttle would separate from the SCA during approach and landing tests. Photo credit: NASA/Kim Shiflett

Model Forecasts of Atrazine in Lake Michigan in Response to Various Sensitivity and Potential Management Scenarios

EPA Science Inventory

For more than forty years, the herbicide atrazine has been used on corn crops in the Lake Michigan basin to control weeds. It is usually applied to farm fields in the spring before or after the corn crop emerges. A version of the WASP4 mass balance model, LM2-Atrazine, was used...

Evaluation of GFDL-AM4 simulations of nitrogen oxides with OMI satellite observations

NASA Astrophysics Data System (ADS)

Penn, E.; Horowitz, L. W.; Naik, V.

2017-12-01

We examine the seasonal cycle and interannual variability of NO2 from 2005-2015 of NO2 over key global regions using simulations with a nudged version of the GFDL-AM4 chemistry-climate model and satellite-based observations from OMI (Ozone Monitoring Instrument), which observes near-global NO2 column abundances at 1pm local time daily. We gridded TEMIS (Tropospheric Emissions Monitoring Internet Service) OMI data to the model spatial grid using WHIPS 2.0 (Wisconsin Horizontal Interpolation Program for Satellites version 2.0) and applied the OMI averaging kernel to weight the model's NO2 concentrations vertically. Model-simulated tropospheric NO2 columns reproduce well the OMI spatial patterns (averaging r2=0.81) and seasonal cycles, but underestimate observations in most regions by 16-62%. A notable exception is the overestimate by 5-35% in East Asia. In regions dominated by biomass burning, these emissions tend to control the seasonal cycle of NO2. However, where anthropogenic emissions dominate, the photochemical conversion of NO2 to PAN and nitric acid controls the seasonal cycle, as indicated by NO2/NOy ratios. Future work is required to explain AM4 biases relative to OMI.

Sliding mode fault tolerant control dealing with modeling uncertainties and actuator faults.

PubMed

Wang, Tao; Xie, Wenfang; Zhang, Youmin

2012-05-01

In this paper, two sliding mode control algorithms are developed for nonlinear systems with both modeling uncertainties and actuator faults. The first algorithm is developed under an assumption that the uncertainty bounds are known. Different design parameters are utilized to deal with modeling uncertainties and actuator faults, respectively. The second algorithm is an adaptive version of the first one, which is developed to accommodate uncertainties and faults without utilizing exact bounds information. The stability of the overall control systems is proved by using a Lyapunov function. The effectiveness of the developed algorithms have been verified on a nonlinear longitudinal model of Boeing 747-100/200. Copyright © 2012 ISA. Published by Elsevier Ltd. All rights reserved.

Landfill Gas Energy Cost Model Version 3.0 (LFGcost-Web V3 ...

EPA Pesticide Factsheets

To help stakeholders estimate the costs of a landfill gas (LFG) energy project, in 2002, LMOP developed a cost tool (LFGcost). Since then, LMOP has routinely updated the tool to reflect changes in the LFG energy industry. Initially the model was designed for EPA to assist landfills in evaluating the economic and financial feasibility of LFG energy project development. In 2014, LMOP developed a public version of the model, LFGcost-Web (Version 3.0), to allow landfill and industry stakeholders to evaluate project feasibility on their own. LFGcost-Web can analyze costs for 12 energy recovery project types. These project costs can be estimated with or without the costs of a gas collection and control system (GCCS). The EPA used select equations from LFGcost-Web to estimate costs of the regulatory options in the 2015 proposed revisions to the MSW Landfills Standards of Performance (also known as New Source Performance Standards) and the Emission Guidelines (herein thereafter referred to collectively as the Landfill Rules). More specifically, equations derived from LFGcost-Web were applied to each landfill expected to be impacted by the Landfill Rules to estimate annualized installed capital costs and annual O&M costs of a gas collection and control system. In addition, after applying the LFGcost-Web equations to the list of landfills expected to require a GCCS in year 2025 as a result of the proposed Landfill Rules, the regulatory analysis evaluated whether electr

Systems development of a stall/spin research facility using remotely controlled/augmented aircraft models. Volume 1: Systems overview

NASA Technical Reports Server (NTRS)

Montoya, R. J.; Jai, A. R.; Parker, C. D.

1979-01-01

A ground based, general purpose, real time, digital control system simulator (CSS) is specified, developed, and integrated with the existing instrumentation van of the testing facility. This CSS is built around a PDP-11/55, and its operational software was developed to meet the dual goal of providing the immediate capability to represent the F-18 drop model control laws and the flexibility for expansion to represent more complex control laws typical of control configured vehicles. Overviews of the two CSS's developed are reviewed as well as the overall system after their integration with the existing facility. Also the latest version of the F-18 drop model control laws (REV D) is described and the changes needed for its incorporation in the digital and analog CSS's are discussed.

Monotone viable trajectories for functional differential inclusions

NASA Astrophysics Data System (ADS)

Haddad, Georges

This paper is a study on functional differential inclusions with memory which represent the multivalued version of retarded functional differential equations. The main result gives a necessary and sufficient equations. The main result gives a necessary and sufficient condition ensuring the existence of viable trajectories; that means trajectories remaining in a given nonempty closed convex set defined by given constraints the system must satisfy to be viable. Some motivations for this paper can be found in control theory where F( t, φ) = { f( t, φ, u)} uɛU is the set of possible velocities of the system at time t, depending on the past history represented by the function φ and on a control u ranging over a set U of controls. Other motivations can be found in planning procedures in microeconomics and in biological evolutions where problems with memory do effectively appear in a multivalued version. All these models require viability constraints represented by a closed convex set.

JPSS-1 VIIRS Version 2 At-Launch Relative Spectral Response Characterization and Performance

NASA Technical Reports Server (NTRS)

Moeller, Chris; Schwarting, Thomas; McIntire, Jeff; Moyer, Dave; Zeng, Jinan

2017-01-01

The relative spectral response (RSR) characterization of the JPSS-1 VIIRS spectral bands has achieved at launch status in the VIIRS Data Analysis Working Group February 2016 Version 2 RSR release. The Version 2 release improves upon the June 2015 Version 1 release by including December 2014 NIST TSIRCUS spectral measurements of VIIRS VisNIR bands in the analysis plus correcting CO2 influence on the band M13 RSR. The T-SIRCUS based characterization is merged with the summer 2014 SpMA based characterization of VisNIR bands (Version 1 release) to yield a fused RSR for these bands, combining the strengths of the T-SIRCUS and the SpMA measurement systems. The M13 RSR is updated by applying a model-based correction to mitigate CO2 attenuation of the SpMA source signal that occurred during M13 spectral measurements. The Version 2 release carries forward the Version 1 RSR for those bands that were not updated (M8-M12, M14-M16AB, I3-I5, DNBMGS). The Version 2 release includes band average (overall detectors and subsamples) RSR plus supporting RSR for each detector and subsample. The at-launch band average RSR have been used to populate Look-Up Tables supporting the sensor data record and environmental data record at-launch science products. Spectral performance metrics show that JPSS-1VIIRS RSR are compliant on specifications with a few minor exceptions. The Version 2 release, which replaces the Version 1 release, is currently available on the password-protected NASA JPSS-1 eRooms under EAR99 control.

Substance use avoidance among Iranian male adolescents: a comparison of three versions of the theory of reasoned action.

PubMed

Tavousi, Mahmoud; Montazeri, Ali; Hidarnia, Alireza; Hajizadeh, Ebrahim; Taremian, Farhad; Haerimehrizi, Aliasghar

2015-08-01

The theory of reasoned action (TRA) is one of the most common models in predicting health-related behaviors and is used more often in health education studies. This study aimed to add two control constructs (perceived behavioral control - PBC and self-efficacy - SE) to the TRA and compare them using the structural equation modeling (SEM) for substance use avoidance among Iranian male adolescents in order to find out which model was a better fit in predicting the intention. This was a cross-sectional study carried out in Tehran, Iran. Data were collected from a random sample of high school male students (15-19 years of age) using a questionnaire containing items related to the TRA plus items reflecting two additional constructs (SE and PBC). In all, 433 students completed the questionnaires. The results obtained from SEM indicated a better fit to the data for the TRA with SE compared to the TPB (TRA with PBC) and TRA (χ2/df=2.55, RMSEA=0.072, CFI=0.96, NFI=0.94, NNFI=0.95, SRMR=0.058). Comparing SE and PBC, the results showed that self-efficacy was a better control construct in improving the TRA and predicting substance use avoidance intention (41%). The TRA with SE had a better model fit than TPB and the original version of the TRA.

What's new in the Atmospheric Model Evaluation Tool (AMET) version 1.3

EPA Science Inventory

A new version of the Atmospheric Model Evaluation Tool (AMET) has been released. The new version of AMET, version 1.3 (AMETv1.3), contains a number of updates and changes from the previous of version of AMET (v1.2) released in 2012. First, the Perl scripts used in the previous ve...

Rear wheel torque vectoring model predictive control with velocity regulation for electric vehicles

NASA Astrophysics Data System (ADS)

Siampis, Efstathios; Velenis, Efstathios; Longo, Stefano

2015-11-01

In this paper we propose a constrained optimal control architecture for combined velocity, yaw and sideslip regulation for stabilisation of the vehicle near the limit of lateral acceleration using the rear axle electric torque vectoring configuration of an electric vehicle. A nonlinear vehicle and tyre model are used to find reference steady-state cornering conditions and design two model predictive control (MPC) strategies of different levels of fidelity: one that uses a linearised version of the full vehicle model with the rear wheels' torques as the input, and another one that neglects the wheel dynamics and uses the rear wheels' slips as the input instead. After analysing the relative trade-offs between performance and computational effort, we compare the two MPC strategies against each other and against an unconstrained optimal control strategy in Simulink and Carsim environment.

Comparison of the Psychometric Properties of the "Word" and "Picture" Versions of the Free and Cued Selective Reminding Test in a Spanish-Speaking Cohort of Patients with Mild Alzheimer's Disease and Cognitively Healthy Controls.

PubMed

Delgado, Carolina; Muñoz-Neira, Carlos; Soto, Ambar; Martínez, Melissa; Henríquez, Fernando; Flores, Patricia; Slachevsky, Andrea

2016-03-01

The aim of this study was to compare the psychometric properties of the "Word" and "Picture" versions of the Spanish FCSRT across the same sample of mild Alzheimer disease (AD) patients and controls. Mild AD patients (N = 50, 27 CDR = 0.5; 23 CDR = 1) and controls (N = 42, CDR = 0) were assessed with an extensive clinical and neuropsychological evaluation. Psychometric characteristics for both versions of the FCSRT were compared. Free recall (FR) and total recall (TR) across both versions of the FCSRT showed areas under the curve >0.9 and did not significantly differ between them. The scores of both versions were well correlated, although the scores for the Picture version were greater than those for the Word version, particularly for the TR scores of the mild AD group. Both versions of the FCSRT showed an appropriate accuracy to distinguish mild AD patients and controls. Visual cues were easier to recall than verbal cues, especially in the memory impaired patients. © The Author 2016. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Psychometric properties of Multidimensional Health Locus of Control - A and General Self-Efficacy Scale in civil servants: ELSA-Brasil Musculoskeletal Study (ELSA-Brasil MSK)

PubMed Central

Machado, Luciana A. C.; Telles, Rosa W.; Costa-Silva, Luciana; Barreto, Sandhi M.

2016-01-01

Abstract Background Health-related control and self-efficacy beliefs can be assessed in the general population using Multidimensional Health Locus of Control-A subscales (MHLC-A) and the General Self-Efficacy Scale (GSES), respectively. Objective To test construct validity, internal consistency, reliability (test-retest) and ceiling and floor effects of Portuguese-Brazil versions of MHLC-A and GSES. Method Civil servants (N=2901) enrolled in a large Brazilian cohort were included. A new version of the GSES was produced (GSES-Brazil). Procedures for cross-cultural adaptation and testing of psychometric properties followed well-accepted international guidelines. Results Confirmatory factor analyses yielded the following indices: MHLC-A (tridimensional model): χ2[df]=223.45[132], p-value <0.01; CFI=0.87; TLI=0.85; RMSEA=0.07 (0.07-0.08); WRMR=3.00. GSES-Brazil (unidimensional model): χ2[df]=788.60[35], p-value <0.01; CFI=0.95; TLI=0.94; RMSEA=0.09 (0.08-0.09); WRMR=2.50. Cronbach’s alpha coefficients and Intraclass Correlation Coefficients (ICC2,1) ranged from 0.57 (0.54-0.59) and 0.57 (0.47-0.65) for MHLC-A internality to 0.80 (0.79-0.81) and 0.71 (0.66-0.77) for GSES-Brazil, respectively. There was no evidence of ceiling and floor effects. Convergent validity analyses provided further support for construct validity of both scales. Conclusion These findings support the use of the newly developed version of GSES-Brazil for the assessment of general self-efficacy of adult Brazilians. Internal consistency was lower than ideal for MHLC-A, indicating these subscales may need further refinements to provide a more psychometrically sound measure of control beliefs. PMID:27878226

Parametric Study of Flow Control Over a Hump Model Using an Unsteady Reynolds- Averaged Navier-Stokes Code

NASA Technical Reports Server (NTRS)

Rumsey, Christopher L.; Greenblatt, David

2007-01-01

This is an expanded version of a limited-length paper that appeared at the 5th International Symposium on Turbulence and Shear Flow Phenomena by the same authors. A computational study was performed for steady and oscillatory flow control over a hump model with flow separation to assess how well the steady and unsteady Reynolds-averaged Navier-Stokes equations predict trends due to Reynolds number, control magnitude, and control frequency. As demonstrated in earlier studies, the hump model case is useful because it clearly demonstrates a failing in all known turbulence models: they under-predict the turbulent shear stress in the separated region and consequently reattachment occurs too far downstream. In spite of this known failing, three different turbulence models were employed to determine if trends can be captured even though absolute levels are not. Overall the three turbulence models showed very similar trends as experiment for steady suction, but only agreed qualitatively with some of the trends for oscillatory control.

ASTEC and MODEL: Controls software development at Goddard Space Flight Center

NASA Technical Reports Server (NTRS)

Downing, John P.; Bauer, Frank H.; Surber, Jeffrey L.

1993-01-01

The ASTEC (Analysis and Simulation Tools for Engineering Controls) software is under development at the Goddard Space Flight Center (GSFC). The design goal is to provide a wide selection of controls analysis tools at the personal computer level, as well as the capability to upload compute-intensive jobs to a mainframe or supercomputer. In the last three years the ASTEC (Analysis and Simulation Tools for Engineering Controls) software has been under development. ASTEC is meant to be an integrated collection of controls analysis tools for use at the desktop level. MODEL (Multi-Optimal Differential Equation Language) is a translator that converts programs written in the MODEL language to FORTRAN. An upgraded version of the MODEL program will be merged into ASTEC. MODEL has not been modified since 1981 and has not kept with changes in computers or user interface techniques. This paper describes the changes made to MODEL in order to make it useful in the 90's and how it relates to ASTEC.

A Model of Yeast Cell-Cycle Regulation Based on a Standard Component Modeling Strategy for Protein Regulatory Networks.

PubMed

Laomettachit, Teeraphan; Chen, Katherine C; Baumann, William T; Tyson, John J

2016-01-01

To understand the molecular mechanisms that regulate cell cycle progression in eukaryotes, a variety of mathematical modeling approaches have been employed, ranging from Boolean networks and differential equations to stochastic simulations. Each approach has its own characteristic strengths and weaknesses. In this paper, we propose a "standard component" modeling strategy that combines advantageous features of Boolean networks, differential equations and stochastic simulations in a framework that acknowledges the typical sorts of reactions found in protein regulatory networks. Applying this strategy to a comprehensive mechanism of the budding yeast cell cycle, we illustrate the potential value of standard component modeling. The deterministic version of our model reproduces the phenotypic properties of wild-type cells and of 125 mutant strains. The stochastic version of our model reproduces the cell-to-cell variability of wild-type cells and the partial viability of the CLB2-dbΔ clb5Δ mutant strain. Our simulations show that mathematical modeling with "standard components" can capture in quantitative detail many essential properties of cell cycle control in budding yeast.

A Model of Yeast Cell-Cycle Regulation Based on a Standard Component Modeling Strategy for Protein Regulatory Networks

PubMed Central

Laomettachit, Teeraphan; Chen, Katherine C.; Baumann, William T.

2016-01-01

To understand the molecular mechanisms that regulate cell cycle progression in eukaryotes, a variety of mathematical modeling approaches have been employed, ranging from Boolean networks and differential equations to stochastic simulations. Each approach has its own characteristic strengths and weaknesses. In this paper, we propose a “standard component” modeling strategy that combines advantageous features of Boolean networks, differential equations and stochastic simulations in a framework that acknowledges the typical sorts of reactions found in protein regulatory networks. Applying this strategy to a comprehensive mechanism of the budding yeast cell cycle, we illustrate the potential value of standard component modeling. The deterministic version of our model reproduces the phenotypic properties of wild-type cells and of 125 mutant strains. The stochastic version of our model reproduces the cell-to-cell variability of wild-type cells and the partial viability of the CLB2-dbΔ clb5Δ mutant strain. Our simulations show that mathematical modeling with “standard components” can capture in quantitative detail many essential properties of cell cycle control in budding yeast. PMID:27187804

Assessing Mindfulness on a Sample of Catalan-Speaking Spanish Adolescents: Validation of the Catalan Version of the Child and Adolescent Mindfulness Measure.

PubMed

Viñas, Ferran; Malo, Sara; González, Mònica; Navarro, Dolors; Casas, Ferran

2015-06-22

Interest in mindfulness has increased over the last decade, resulting in several mindfulness-based interventions being developed and their efficacy empirically demonstrated. The practice of mindfulness has been associated with low levels of anxiety or depression and improved quality of life or personal well-being. The aim of this study is to translate the Child and Adolescent Mindfulness Measure (CAMM) and adapt it to Catalan so as to analyze its internal consistency and construct and convergent validity. The CAMM was administered to a sample of secondary school students ranging in age from 11 to 16 years old. The Catalan version of the CAMM shows a good fit with the unidimensional model and internal consistency similar to the original version (α = .80). Furthermore, CAMM scores correlated positively with subjective well-being, temperamental dimensions of effortful control and self-esteem. The Catalan Version of CAMM is a valid and reliable measure of mindfulness skills.

Spanish version of Bus Drivers' Job Demands Scale (BDJD-24).

PubMed

Boada-Grau, Joan; Prizmic-Kuzmica, Aldo-Javier; González-Fernández, Marcos-David; Vigil-Colet, Andreu

2013-01-01

Karasek and Theorell's Job Demands-Control Model argues that adverse health-related outcomes, both psychological and physiological, arise from a combination of high job demand and a low level of job control. The objective was to adapt Meijman and Kompier's Bus Drivers' Job Demands Scale (BDJD-24), which enables us to assess the job demands of bus drivers, to Spanish. The final version of the Spanish adaptation was applied to a sample made up of 287 bus drivers living in Spain (80.1% men and 19.9% women), whose average age was 40.44 (SD= 11.78). The results yielded a three-factor structure for the scale used: Time Pressure, Safety, and Passengers. These findings confirm that the Spanish version replicates the factor structure of the original English scale. The reliability of the three subscales was acceptable, ranging from .75 to .84. Furthermore, the subscales were also related to different external correlates and to other scales and showed good convergent and criterion validity. The present instrument can be used to evaluate job demands of bus drivers, as its psychometrics are substantially sound.

Evaluation of the Community Multiscale Air Quality (CMAQ) Model Version 5.1

EPA Science Inventory

The AMAD will performed two CMAQ model simulations, one with the current publically available version of the CMAQ model (v5.0.2) and the other with the new version of the CMAQ model (v5.1). The results of each model simulation are compared to observations and the performance of t...

Preliminary Evaluation of the Community Multiscale Air Quality (CMAQ) Model Version 5.1

EPA Science Inventory

The AMAD will perform two annual CMAQ model simulations, one with the current publically available version of the CMAQ model (v5.0.2) and the other with the beta version of the new model (v5.1). The results of each model simulation will then be compared to observations and the pe...

Self-reported competency--validation of the Norwegian version of the patient competency rating scale for traumatic brain injury.

PubMed

Sveen, Unni; Andelic, Nada; Bautz-Holter, Erik; Røe, Cecilie

2015-01-01

To evaluate the psychometric properties of the Norwegian version of the Patient Competency Rating Scale (PCRS) in patients with traumatic brain injury (TBI) at 12 months post-injury. Demographic and injury-related data were registered upon admission to the hospital in 148 TBI patients with mild, moderate, or severe TBI. At 12 months post-injury, competency in activities and global functioning were measured using the PCRS patient version and the Glasgow Outcome Scale-Extended (GOSE). Descriptive reliability statistics, factor analysis and Rasch modeling were applied to explore the psychometric properties of the PCRS. External validity was evaluated using the GOSE. The PCRS can be divided into three subscales that reflect interpersonal/emotional, cognitive, and activities of daily living competency. The three-factor solution explained 56.6% of the variance in functioning. The internal consistency was very good, with a Cronbach's α of 0.95. Item 30, "controlling my laughter", did not load above 0.40 on any factors and did not fit the Rasch model. The external validity of the subscales was acceptable, with correlations between 0.50 and 0.52 with the GOSE. The Norwegian version of the PCRS is reliable, has an acceptable construct and external validity, and can be recommended for use during the later phases of TBI.

Controls on SOC across space and time: Models with different acclimation schemes make similar spatial predictions but divergent warming predictions

NASA Astrophysics Data System (ADS)

Abramoff, R. Z.; Torn, M. S.; Georgiou, K.; Tang, J.; Riley, W. J.

2017-12-01

Researchers use spatial gradients to estimate long-term ecosystem responses to perturbations. This approach is commonly applied to soil organic carbon (SOC) stocks which change slowly but store the majority of terrestrial carbon. Climate warming may reduce SOC stocks if higher temperatures increase decomposition rates. Yet, it is uncertain how vulnerable SOC is to warming, and whether the same factors - such as organo-mineral associations, climate, or plant inputs - determine SOC stocks across space and time. In order to test the "space for time" concept, we developed two versions of the Substrate-Mineral-Microbe Soil (SuMMS) model - one with microbial temperature acclimation and one without - to analyze observed SOC stocks at 24 sites spanning a wide range of soil types and climate. Both model predictions of SOC were strongly correlated with observations (R2 > 0.9), because mineral sorption capacity was the dominant control over steady-state SOC stock as determined by a Random Forest model. However, the two model versions made fundamentally different predictions of the change in SOC following 5°C soil warming from 2016 to 2100 because the initial mean annual temperature (MAT) was the dominant control over the SOC response. The model with microbial acclimation predicted that SOC would decline 10% at all sites along the transect, while the model with no acclimation predicted large surface SOC losses at high latitude sites and SOC gains at low latitude sites where microbial exoenzymes were already at or near their temperature optimum. These simulations suggest that gradient studies cannot be used to infer site-level responses to warming, because the dominant controls on SOC at steady state (i.e., mineral sorption capacity) are different than the dominant controls on the SOC response to a warming perturbation (i.e., initial MAT, capacity for acclimation).

Naturalizing supersymmetry with a two-field relaxion mechanism

DOE PAGES

Evans, Jason L.; Gherghetta, Tony; Nagata, Natsumi; ...

2016-09-26

We present a supersymmetric version of a two-field relaxion model that naturalizes tuned versions of supersymmetry. This arises from a relaxion mechanism that does not depend on QCD dynamics and where the relaxion potential barrier height is controlled by a second axion-like field. During the cosmological evolution, the relaxion rolls with a nonzero value that breaks supersymmetry and scans the soft supersymmetric mass terms. Electroweak symmetry is broken after the soft masses become of order the supersymmetric Higgs mass term and causes the relaxion to stop rolling for superpartner masses up to ~10 9 GeV. This can explain the tuningmore » in supersymmetric models, including split-SUSY models, while preserving the QCD axion solution to the strong CP problem. Furthermore, besides predicting two very weakly-coupled axion-like particles, the supersymmetric spectrum may contain an extra Goldstino, which could be a viable dark matter candidate.« less

NETPATH-WIN: an interactive user version of the mass-balance model, NETPATH

USGS Publications Warehouse

El-Kadi, A. I.; Plummer, Niel; Aggarwal, P.

2011-01-01

NETPATH-WIN is an interactive user version of NETPATH, an inverse geochemical modeling code used to find mass-balance reaction models that are consistent with the observed chemical and isotopic composition of waters from aquatic systems. NETPATH-WIN was constructed to migrate NETPATH applications into the Microsoft WINDOWS® environment. The new version facilitates model utilization by eliminating difficulties in data preparation and results analysis of the DOS version of NETPATH, while preserving all of the capabilities of the original version. Through example applications, the note describes some of the features of NETPATH-WIN as applied to adjustment of radiocarbon data for geochemical reactions in groundwater systems.

Heliport noise model (HNM) version 1 user's guide

DOT National Transportation Integrated Search

1988-02-01

This document contains the instructions to execute the Heliport Noise Model (HNM), Version 1. HNM Version 1 is a computer tool for determining the total impact of helicopter noise at and around heliports. The model runs on IBM PC/XT/AT personal compu...

Summary of Research 1997, Department of Mechanical Engineering.

DTIC Science & Technology

1999-01-01

Maintenance for Diesel Engines 49 Control Architectures and Non-Linear Controllers for Unmanned Underwater Vehicles 38 Creep of Fiber Reinforced Metal...Technology Demonstration (ATD) 50 Development of Delphi Visual Performance Model 25 Diffraction Methods for the Accurate Measurement of Structure Factors...literature. If this could be done, a U.S. version of ORACLE (to be called DELPHI ) could be developed and used. The result has been the development of a

OLS Client and OLS Dialog: Open Source Tools to Annotate Public Omics Datasets.

PubMed

Perez-Riverol, Yasset; Ternent, Tobias; Koch, Maximilian; Barsnes, Harald; Vrousgou, Olga; Jupp, Simon; Vizcaíno, Juan Antonio

2017-10-01

The availability of user-friendly software to annotate biological datasets and experimental details is becoming essential in data management practices, both in local storage systems and in public databases. The Ontology Lookup Service (OLS, http://www.ebi.ac.uk/ols) is a popular centralized service to query, browse and navigate biomedical ontologies and controlled vocabularies. Recently, the OLS framework has been completely redeveloped (version 3.0), including enhancements in the data model, like the added support for Web Ontology Language based ontologies, among many other improvements. However, the new OLS is not backwards compatible and new software tools are needed to enable access to this widely used framework now that the previous version is no longer available. We here present the OLS Client as a free, open-source Java library to retrieve information from the new version of the OLS. It enables rapid tool creation by providing a robust, pluggable programming interface and common data model to programmatically access the OLS. The library has already been integrated and is routinely used by several bioinformatics resources and related data annotation tools. Secondly, we also introduce an updated version of the OLS Dialog (version 2.0), a Java graphical user interface that can be easily plugged into Java desktop applications to access the OLS. The software and related documentation are freely available at https://github.com/PRIDE-Utilities/ols-client and https://github.com/PRIDE-Toolsuite/ols-dialog. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Randomized Controlled Trial of SuperBetter, a Smartphone-Based/Internet-Based Self-Help Tool to Reduce Depressive Symptoms.

PubMed

Roepke, Ann Marie; Jaffee, Sara R; Riffle, Olivia M; McGonigal, Jane; Broome, Rose; Maxwell, Bez

2015-06-01

Technological advances have sparked the development of computer- and smartphone-based self-help programs for depressed people, but these programs' efficacy is uncertain. This randomized controlled trial evaluated an intervention called SuperBetter (SB), which is accessed via smartphone and/or the SB Web site. Online, we recruited 283 adult iPhone(®) (Apple, Cupertino, CA) users with significant depression symptoms according to the Center for Epidemiological Studies Depression questionnaire (CES-D). They were randomly assigned to one of three conditions: (a) a version of SB using cognitive-behavioral therapy and positive psychotherapy strategies to target depression (CBT-PPT SB); (b) a general SB version focused on self-esteem and acceptance (General SB); or (c) a waiting list control group (WL). The two SB groups were instructed to use SB for 10 minutes daily for 1 month. All participants completed psychological distress and well-being measures online every 2 weeks through follow-up. An intent-to-treat analysis was conducted using hierarchical linear modeling. As hypothesized, SB participants achieved greater reductions in CES-D scores than WL participants by posttest (Cohen's d=0.67) and by follow-up (d=1.05). Contrary to prediction, CBT-PPT SB did not perform better than General SB; both versions of SB were more effective than the WL control. Differences between SB versions favored General SB but were not statistically significant. These large effect sizes should be interpreted cautiously in light of high attrition rates and the motivated, self-selected sample. Nonetheless, smartphone-based/Internet-based self-help may play an important role in treating depression.

CERT Resilience Management Model - Mail-Specific Process Areas: International Mail Transportation (Version 1.0)

DTIC Science & Technology

2014-08-01

IMPC. These threats may include natural and man-made disasters, damage, theft, fraud, and terrorism. Natural disasters such as hurricanes, earthquakes ...controls for mail sanctity include surveillance cameras, metal detectors , and X-ray screening to detect dangerous goods. (See IMT:SG2.SP1 and

TRANSFERABLE DISCHARGE PERMITS FOR CONTROL OF SO2 EMISSIONS FROM ILLINOIS POWER PLANTS (JOURNAL VERSION)

EPA Science Inventory

The paper discusses the use of a large scale simulation model in evaluating various policy alternatives for reducing SO2 emissions from Illinois electric power plants for a broad range of nuclear power capacity addition scenarios. A dynamic simulation of a transferable discharge ...

A Descriptive Evaluation of Automated Software Cost-Estimation Models,

DTIC Science & Technology

1986-10-01

Version 1.03D) * PCOC (Version 7.01) - PRICE S • SLIM (Version 1.1) • SoftCost (Version 5. 1) * SPQR /20 (Version 1. 1) - WICOMO (Version 1.3) These...produce detailed GANTT and PERT charts. SPQR /20 is based on a cost model developed at ITT. In addition to cost, schedule, and staffing estimates, it...cases and test runs required, and the effectiveness of pre-test and test activities. SPQR /20 also predicts enhancement and maintenance activities. C

Vietnamese validation of the short version of Internet Addiction Test.

PubMed

Tran, Bach Xuan; Mai, Hue Thi; Nguyen, Long Hoang; Nguyen, Cuong Tat; Latkin, Carl A; Zhang, Melvyn W B; Ho, Roger C M

2017-12-01

The main goal of the present study was to examine the psychometric properties of a Vietnamese version of the short-version of Internet Addiction Test (s-IAT) and to assess the relationship between s-IAT scores and demographics, health related qualify of life and perceived stress scores in young Vietnamese. The Vietnamese version of s-IAT was administered to a sample of 589 participants. Exploratory factor and reliability analyses were performed. Regression analysis was used to identify the associated factors. The two-factor model of Vietnamese version of s-IAT demonstrated good psychometric properties. The internal consistency of Factor 1 (loss of control/time management) was high (Cronbach's alpha = 0.82) and Factor 2 (craving/social problems) was satisfactory (Cronbach's alpha = 0.75). Findings indicated that 20.9% youths were addicted to the Internet. Regression analysis revealed significant associations between Internet addiction and having problems in self-care, lower quality of life and high perceived stress scores. The Vietnamese version of s-IAT is a valid and reliable instrument to assess IA in Vietnamese population. Due to the high prevalence of IA among Vietnamese youths, IA should be paid attention in future intervention programs. s-IAT can be a useful screening tool for IA to promptly inform and treat the IA among Vietnamese youths.

The Langley Research Center CSI phase-0 evolutionary model testbed-design and experimental results

NASA Technical Reports Server (NTRS)

Belvin, W. K.; Horta, Lucas G.; Elliott, K. B.

1991-01-01

A testbed for the development of Controls Structures Interaction (CSI) technology is described. The design philosophy, capabilities, and early experimental results are presented to introduce some of the ongoing CSI research at NASA-Langley. The testbed, referred to as the Phase 0 version of the CSI Evolutionary model (CEM), is the first stage of model complexity designed to show the benefits of CSI technology and to identify weaknesses in current capabilities. Early closed loop test results have shown non-model based controllers can provide an order of magnitude increase in damping in the first few flexible vibration modes. Model based controllers for higher performance will need to be robust to model uncertainty as verified by System ID tests. Data are presented that show finite element model predictions of frequency differ from those obtained from tests. Plans are also presented for evolution of the CEM to study integrated controller and structure design as well as multiple payload dynamics.

Simulations of the Mid-Pliocene Warm Period Using Two Versions of the NASA-GISS ModelE2-R Coupled Model

NASA Technical Reports Server (NTRS)

Chandler, M. A.; Sohl, L. E.; Jonas, J. A.; Dowsett, H. J.; Kelley, M.

2013-01-01

The mid-Pliocene Warm Period (mPWP) bears many similarities to aspects of future global warming as projected by the Intergovernmental Panel on Climate Change (IPCC, 2007). Both marine and terrestrial data point to high-latitude temperature amplification, including large decreases in sea ice and land ice, as well as expansion of warmer climate biomes into higher latitudes. Here we present our most recent simulations of the mid-Pliocene climate using the CMIP5 version of the NASAGISS Earth System Model (ModelE2-R). We describe the substantial impact associated with a recent correction made in the implementation of the Gent-McWilliams ocean mixing scheme (GM), which has a large effect on the simulation of ocean surface temperatures, particularly in the North Atlantic Ocean. The effect of this correction on the Pliocene climate results would not have been easily determined from examining its impact on the preindustrial runs alone, a useful demonstration of how the consequences of code improvements as seen in modern climate control runs do not necessarily portend the impacts in extreme climates.Both the GM-corrected and GM-uncorrected simulations were contributed to the Pliocene Model Intercomparison Project (PlioMIP) Experiment 2. Many findings presented here corroborate results from other PlioMIP multi-model ensemble papers, but we also emphasize features in the ModelE2-R simulations that are unlike the ensemble means. The corrected version yields results that more closely resemble the ocean core data as well as the PRISM3D reconstructions of the mid-Pliocene, especially the dramatic warming in the North Atlantic and Greenland-Iceland-Norwegian Sea, which in the new simulation appears to be far more realistic than previously found with older versions of the GISS model. Our belief is that continued development of key physical routines in the atmospheric model, along with higher resolution and recent corrections to mixing parameterisations in the ocean model, have led to an Earth System Model that will produce more accurate projections of future climate.

Research in robust control for hypersonic aircraft

NASA Technical Reports Server (NTRS)

Calise, A. J.

1994-01-01

The research during the third reporting period focused on fixed order robust control design for hypersonic vehicles. A new technique was developed to synthesize fixed order H(sub infinity) controllers. A controller canonical form is imposed on the compensator structure and a homotopy algorithm is employed to perform the controller design. Various reduced order controllers are designed for a simplified version of the hypersonic vehicle model used in our previous studies to demonstrate the capabilities of the code. However, further work is needed to investigate the issue of numerical ill-conditioning for large order systems and to make the numerical approach more reliable.

Turbulence simulation mechanization for Space Shuttle Orbiter dynamics and control studies

NASA Technical Reports Server (NTRS)

Tatom, F. B.; King, R. L.

1977-01-01

The current version of the NASA turbulent simulation model in the form of a digital computer program, TBMOD, is described. The logic of the program is discussed and all inputs and outputs are defined. An alternate method of shear simulation suitable for incorporation into the model is presented. The simulation is based on a von Karman spectrum and the assumption of isotropy. The resulting spectral density functions for the shear model are included.

Reliability and construct validity of the Malay version of the Job Content Questionnaire (JCQ) among secondary school teachers in Kota Bharu, Kelantan, Malaysia.

PubMed

Hadi, Azlihanis Abdul; Naing, Nyi Nyi; Daud, Aziah; Nordin, Rusli

2006-11-01

This study was conducted to assess the reliability and construct validity of the Malay version of Job Content Questionnaire (JCQ) among secondary school teachers in Kota Bharu, Kelantan. A total of 68 teachers consented to participate in the study and were administered the Malay version of JCQ. Reliability was determined using Cronbach's alpha for internal consistency whilst construct validity was assessed using factor analysis. The results indicated that Cronbach's alpha coefficients revealed decision latitude (0.75), psychological job demand (0.50) and social support (0.84). Factor analysis showed three meaningful common factors that could explain the construct of Karasek's demand-control-social support model. The study suggests the JCQ scales are reliable and valid tools for assessing job stress in school teachers.

Analysis of the Large Urban Fire Environment. Part II. Parametric Analysis and Model City Simulations.

DTIC Science & Technology

1982-11-01

algorithm for turning-region boundary value problem -70- d. Program control parameters: ALPHA (Qq) max’ maximum value of Qq in present coding. BETA, BLOSS...Parameters available for either system descrip- tion or program control . (These parameters are currently unused, so they are set equal to zero.) IGUESS...Parameter that controls the initial choices of first-shoot values along y = 0. IGUESS = 1: Discretized versions of P(r, 0), T(r, 0), and u(r, 0) must

Spectral Classes for FAA's Integrated Noise Model Version 6.0.

DOT National Transportation Integrated Search

1999-12-07

The starting point in any empirical model such as the Federal Aviation Administrations (FAA) : Integrated Noise Model (INM) is a reference data base. In Version 5.2 and in previous versions : the reference data base consisted solely of a set of no...

JPSS-1 VIIRS version 2 at-launch relative spectral response characterization and performance

NASA Astrophysics Data System (ADS)

Moeller, Chris; Schwarting, Tom; McIntire, Jeff; Moyer, David I.; Zeng, Jinan

2016-09-01

The relative spectral response (RSR) characterization of the JPSS-1 VIIRS spectral bands has achieved "at launch" status in the VIIRS Data Analysis Working Group February 2016 Version 2 RSR release. The Version 2 release improves upon the June 2015 Version 1 release by including December 2014 NIST TSIRCUS spectral measurements of VIIRS VisNIR bands in the analysis plus correcting CO2 influence on the band M13 RSR. The T-SIRCUS based characterization is merged with the summer 2014 SpMA based characterization of VisNIR bands (Version 1 release) to yield a "fused" RSR for these bands, combining the strengths of the T-SIRCUS and the SpMA measurement systems. The M13 RSR is updated by applying a model-based correction to mitigate CO2 attenuation of the SpMA source signal that occurred during M13 spectral measurements. The Version 2 release carries forward the Version 1 RSR for those bands that were not updated (M8-M12, M14-M16A/B, I3-I5, DNBMGS). The Version 2 release includes band average (over all detectors and subsamples) RSR plus supporting RSR for each detector and subsample. The at-launch band average RSR have been used to populate Look-Up Tables supporting the sensor data record and environmental data record at-launch science products. Spectral performance metrics show that JPSS-1 VIIRS RSR are compliant on specifications with a few minor exceptions. The Version 2 release, which replaces the Version 1 release, is currently available on the password-protected NASA JPSS-1 eRooms under EAR99 control.

Dynamic coupling of regional atmosphere to biosphere in the new generation regional climate system model REMO-iMOVE

NASA Astrophysics Data System (ADS)

Wilhelm, C.; Rechid, D.; Jacob, D.

2013-05-01

The main objective of this study is the coupling of the regional climate model REMO to a 3rd generation land surface scheme and the evaluation of the new model version of REMO, called REMO with interactive MOsaic-based VEgetation: REMO-iMOVE. Attention is paid to the documentation of the technical aspects of the new model constituents and the coupling mechanism. We compare simulation results of REMO-iMOVE and of the reference version REMO2009, to investigate the sensitivity of the regional model to the new land surface scheme. An 11 yr climate model run (1995-2005), forced with ECMWF ERA-Interim lateral boundary conditions, over Europe in 0.44° resolution of both model versions was carried out, to represent present day European climate. The result of these experiments are compared to multiple temperature, precipitation, heat flux and leaf area index observation data, to determine the differences in the model versions. The new model version has further the ability to model net primary productivity for the given plant functional types. This new feature is thoroughly evaluated by literature values of net primary productivity of different plant species in European climatic regions. The new model version REMO-iMOVE is able to model the European climate in the same quality as the parent model version REMO2009 does. The differences in the results of the two model versions stem from the differences in the dynamics of vegetation cover and density and can be distinct in some regions, due to the influences of these parameters to the surface heat and moisture fluxes. The modeled inter-annual variability in the phenology as well as the net primary productivity lays in the range of observations and literature values for most European regions. This study also reveals the need for a more sophisticated soil moisture representation in the newly developed model version REMO-iMOVE to be able to treat the differences in plant functional types. This gets especially important if the model will be used in dynamic vegetation studies.

Short-range ensemble predictions based on convection perturbations in the Eta Model for the Serra do Mar region in Brazil

NASA Astrophysics Data System (ADS)

Bustamante, J. F. F.; Chou, S. C.; Gomes, J. L.

2009-04-01

The Southeast Brazil, in the coastal and mountain region called Serra do Mar, between Sao Paulo and Rio de Janeiro, is subject to frequent events of landslides and floods. The Eta Model has been producing good quality forecasts over South America at about 40-km horizontal resolution. For that type of hazards, however, more detailed and probabilistic information on the risks should be provided with the forecasts. Thus, a short-range ensemble prediction system (SREPS) based on the Eta Model is being constructed. Ensemble members derived from perturbed initial and lateral boundary conditions did not provide enough spread for the forecasts. Members with model physics perturbation are being included and tested. The objective of this work is to construct more members for the Eta SREPS by adding physics perturbed members. The Eta Model is configured at 10-km resolution and 38 layers in the vertical. The domain covered is most of Southeast Brazil, centered over the Serra do Mar region. The constructed members comprise variations of the cumulus parameterization Betts-Miller-Janjic (BMJ) and Kain-Fritsch (KF) schemes. Three members were constructed from the BMJ scheme by varying the deficit of saturation pressure profile over land and sea, and 2 members of the KF scheme were included using the standard KF and a momentum flux added to KF scheme version. One of the runs with BMJ scheme is the control run as it was used for the initial condition perturbation SREPS. The forecasts were tested for 6 cases of South America Convergence Zone (SACZ) events. The SACZ is a common summer season feature of Southern Hemisphere that causes persistent rain for a few days over the Southeast Brazil and it frequently organizes over Serra do Mar region. These events are particularly interesting because of the persistent rains that can accumulate large amounts and cause generalized landslides and death. With respect to precipitation, the KF scheme versions have shown to be able to reach the larger precipitation peaks of the events. On the other hand, for predicted 850-hPa temperature, the KF scheme versions produce positive bias and BMJ versions produce negative bias. Therefore, the ensemble mean forecast of 850-hPa temperature of this SREPS exhibits smaller error than the control member. Specific humidity shows smaller bias in the KF scheme. In general, the ensemble mean produced forecasts closer to the observations than the control run.

Development and demonstration of a flutter-suppression system using active controls. [wind tunnel tests

NASA Technical Reports Server (NTRS)

Sandford, M. C.; Abel, I.; Gray, D. L.

1975-01-01

The application of active control technology to suppress flutter was demonstrated successfully in the transonic dynamics tunnel with a delta-wing model. The model was a simplified version of a proposed supersonic transport wing design. An active flutter suppression method based on an aerodynamic energy criterion was verified by using three different control laws. The first two control laws utilized both leading-edge and trailing-edge active control surfaces, whereas the third control law required only a single trailing-edge active control surface. At a Mach number of 0.9 the experimental results demonstrated increases in the flutter dynamic pressure from 12.5 percent to 30 percent with active controls. Analytical methods were developed to predict both open-loop and closed-loop stability, and the results agreed reasonably well with the experimental results.

Mechanical Impedance Modeling of Human Arm: A survey

NASA Astrophysics Data System (ADS)

Puzi, A. Ahmad; Sidek, S. N.; Sado, F.

2017-03-01

Human arm mechanical impedance plays a vital role in describing motion ability of the upper limb. One of the impedance parameters is stiffness which is defined as the ratio of an applied force to the measured deformation of the muscle. The arm mechanical impedance modeling is useful in order to develop a better controller for system that interacts with human as such an automated robot-assisted platform for automated rehabilitation training. The aim of the survey is to summarize the existing mechanical impedance models of human upper limb so to justify the need to have an improved version of the arm model in order to facilitate the development of better controller of such systems with ever increase in complexity. In particular, the paper will address the following issue: Human motor control and motor learning, constant and variable impedance models, methods for measuring mechanical impedance and mechanical impedance modeling techniques.

Development of an hp-version finite element method for computational optimal control

NASA Technical Reports Server (NTRS)

Hodges, Dewey H.; Warner, Michael S.

1993-01-01

The purpose of this research effort is to develop a means to use, and to ultimately implement, hp-version finite elements in the numerical solution of optimal control problems. The hybrid MACSYMA/FORTRAN code GENCODE was developed which utilized h-version finite elements to successfully approximate solutions to a wide class of optimal control problems. In that code the means for improvement of the solution was the refinement of the time-discretization mesh. With the extension to hp-version finite elements, the degrees of freedom include both nodal values and extra interior values associated with the unknown states, co-states, and controls, the number of which depends on the order of the shape functions in each element.

Supplement to The User's Guide for The Stand Prognosis Model-version 5.0

Treesearch

William R. Wykoff

1986-01-01

Differences between Prognosis Model versions 4.0 and 5.0 are described. Additions to version 5.0 include an event monitor that schedules activities contingent on stand characteristics, a regeneration establishment model that predicts the structure of the regeneration stand following treatment, and a COVER model that predicts shrub development and total canopy cover....

Review and verification of CARE 3 mathematical model and code

NASA Technical Reports Server (NTRS)

Rose, D. M.; Altschul, R. E.; Manke, J. W.; Nelson, D. L.

1983-01-01

The CARE-III mathematical model and code verification performed by Boeing Computer Services were documented. The mathematical model was verified for permanent and intermittent faults. The transient fault model was not addressed. The code verification was performed on CARE-III, Version 3. A CARE III Version 4, which corrects deficiencies identified in Version 3, is being developed.

BehavePlus fire modeling system, version 5.0: Variables

Treesearch

Patricia L. Andrews

2009-01-01

This publication has been revised to reflect updates to version 4.0 of the BehavePlus software. It was originally published as the BehavePlus fire modeling system, version 4.0: Variables in July, 2008.The BehavePlus fire modeling system is a computer program based on mathematical models that describe wildland fire behavior and effects and the...

Versions of the Waste Reduction Model (WARM)

EPA Pesticide Factsheets

This page provides a brief chronology of changes made to EPA’s Waste Reduction Model (WARM), organized by WARM version number. The page includes brief summaries of changes and updates since the previous version.

Versions of the Waste Reduction Model (WARM)

EPA Pesticide Factsheets

2017-02-14

This page provides a brief chronology of changes made to EPA’s Waste Reduction Model (WARM), organized by WARM version number. The page includes brief summaries of changes and updates since the previous version.

The conceptualization of emotion regulation difficulties, and its association with posttraumatic stress symptoms in traumatized refugees.

PubMed

Doolan, Emma L; Bryant, Richard A; Liddell, Belinda J; Nickerson, Angela

2017-08-01

This study investigated the conceptualization of emotion regulation difficulties in a sample of refugees with varying levels of posttraumatic stress (PTS), and examined whether specific emotion regulation difficulties were associated with PTS severity. Refugees were administered an abbreviated version of the Difficulties in Emotion Regulation Scale, the PTSD Symptom Scale - Interview Version, and the Harvard Trauma Questionnaire. Confirmatory Factor Analysis was used to examine model fit for the 6-factor model originally proposed by the developers of the DERS and the more recently proposed 5-factor model that excludes the awareness subscale. Both models displayed adequate fit. After controlling for age, gender, time in Australia, and trauma exposure, the clarity and strategies subscales were significantly associated with PTS severity. The association between impaired emotional clarity and reduced agency related to accessing regulation strategies and PTS severity in this refugee sample highlights the need for further research to assess interventions that target these disruptions in refugees. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparison of COBRA III-C and SABRE-1 (wire-wrap version) computational results with steady-state data from a 19-pin internally guard heated sodium-cooled bundle with a six-channel central blockage (THORS Bundle 3C). [LMFBR

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dearing, J F; Nelson, W R; Rose, S D

Computational thermal-hydraulic models of a 19-pin, electrically heated, wire-wrap liquid-metal fast breeder reactor test bundle were developed using two well-known subchannel analysis codes, COBRA III-C and SABRE-1 (wire-wrap version). These two codes use similar subchannel control volumes for the finite difference conservation equations but vary markedly in solution strategy and modeling capability. In particular, the empirical wire-wrap-forced diversion crossflow models are different. Surprisingly, however, crossflow velocity predictions of the two codes are very similar. Both codes show generally good agreement with experimental temperature data from a test in which a large radial temperature gradient was imposed. Differences between data andmore » code results are probably caused by experimental pin bowing, which is presently the limiting factor in validating coded empirical models.« less

Simulation of modern climate with the new version of the INM RAS climate model

NASA Astrophysics Data System (ADS)

Volodin, E. M.; Mortikov, E. V.; Kostrykin, S. V.; Galin, V. Ya.; Lykosov, V. N.; Gritsun, A. S.; Diansky, N. A.; Gusev, A. V.; Yakovlev, N. G.

2017-03-01

The INMCM5.0 numerical model of the Earth's climate system is presented, which is an evolution from the previous version, INMCM4.0. A higher vertical resolution for the stratosphere is applied in the atmospheric block. Also, we raised the upper boundary of the calculating area, added the aerosol block, modified parameterization of clouds and condensation, and increased the horizontal resolution in the ocean block. The program implementation of the model was also updated. We consider the simulation of the current climate using the new version of the model. Attention is focused on reducing systematic errors as compared to the previous version, reproducing phenomena that could not be simulated correctly in the previous version, and modeling the problems that remain unresolved.

AF-GEOSpace Version 2.0: Space Environment Software Products for 2002

NASA Astrophysics Data System (ADS)

Hilmer, R. V.; Ginet, G. P.; Hall, T.; Holeman, E.; Tautz, M.

2002-05-01

AF-GEOSpace Version 2.0 (release 2002 on WindowsNT/2000/XP) is a graphics-intensive software program developed by AFRL with space environment models and applications. It has grown steadily to become a development tool for automated space weather visualization products and helps with a variety of tasks: orbit specification for radiation hazard avoidance; satellite design assessment and post-event analysis; solar disturbance effects forecasting; frequency and antenna management for radar and HF communications; determination of link outage regions for active ionospheric conditions; and physics research and education. The object-oriented C++ code is divided into five module classes. Science Modules control science models to give output data on user-specified grids. Application Modules manipulate these data and provide orbit generation and magnetic field line tracing capabilities. Data Modules read and assist with the analysis of user-generated data sets. Graphics Modules enable the display of features such as plane slices, magnetic field lines, line plots, axes, the Earth, stars, and satellites. Worksheet Modules provide commonly requested coordinate transformations and calendar conversion tools. Common input data archive sets, application modules, and 1-, 2-, and 3-D visualization tools are provided to all models. The code documentation includes detailed examples with click-by-click instructions for investigating phenomena that have well known effects on communications and spacecraft systems. AF-GEOSpace Version 2.0 builds on the success of its predecessors. The first release (Version 1.21, 1996/IRIX on SGI) contained radiation belt particle flux and dose models derived from CRRES satellite data, an aurora model, an ionosphere model, and ionospheric HF ray tracing capabilities. Next (Version 1.4, 1999/IRIX on SGI) science modules were added related to cosmic rays and solar protons, low-Earth orbit radiation dosages, single event effects probability maps, ionospheric scintillation, and shock propagation models. New application modules for estimating linear energy transfer (LET) and single event upset (SEU) rates in solid-state devices, and graphic modules for visualizing radar fans, communication domes, and satellite detector cones and links were added. Automated FTP scripts permitted users to update their global input parameter set directly from NOAA/SEC. What?s New? Version 2.0 includes the first true dynamic run capabilities and offers new and enhanced graphical and data visualization tools such as 3-D volume rendering and eclipse umbra and penumbra determination. Animations of all model results can now be displayed together in all dimensions. There is a new realistic day-to-day ionospheric scintillation simulation generator (IONSCINT), an upgrade to the WBMOD scintillation code, a simplified HF ionospheric ray tracing module, and applications built on the NASA AE-8 and AP-8 radiation belt models. User-generated satellite data sets can now be visualized along with their orbital ephemeris. A prototype tool for visualizing MHD model results stored in structured grids provides a hint of where future space weather model development efforts are headed. A new graphical user interface (GUI) with improved module tracking and renaming features greatly simplifies software operation. AF-GEOSpace is distributed by the Space Weather Center of Excellence in the Space Vehicles Directorate of AFRL. Recently released for WindowsNT/2000/XP, versions for UNIX and LINUX operating systems will follow shortly. To obtain AF-GEOSpace Version 2.0, please send an e-mail request to the first author.

The Benefits of Latent Variable Modeling to Develop Norms for a Translated Version of a Standardized Scale

ERIC Educational Resources Information Center

Seo, Hyojeong; Shaw, Leslie A.; Shogren, Karrie A.; Lang, Kyle M.; Little, Todd D.

2017-01-01

This article demonstrates the use of structural equation modeling to develop norms for a translated version of a standardized scale, the Supports Intensity Scale-Children's Version (SIS-C). The latent variable norming method proposed is useful when the standardization sample for a translated version is relatively small to derive norms…

Evolution of errors in the altimetric bathymetry model used by Google Earth and GEBCO

NASA Astrophysics Data System (ADS)

Marks, K. M.; Smith, W. H. F.; Sandwell, D. T.

2010-09-01

We analyze errors in the global bathymetry models of Smith and Sandwell that combine satellite altimetry with acoustic soundings and shorelines to estimate depths. Versions of these models have been incorporated into Google Earth and the General Bathymetric Chart of the Oceans (GEBCO). We use Japan Agency for Marine-Earth Science and Technology (JAMSTEC) multibeam surveys not previously incorporated into the models as "ground truth" to compare against model versions 7.2 through 12.1, defining vertical differences as "errors." Overall error statistics improve over time: 50th percentile errors declined from 57 to 55 to 49 m, and 90th percentile errors declined from 257 to 235 to 219 m, in versions 8.2, 11.1 and 12.1. This improvement is partly due to an increasing number of soundings incorporated into successive models, and partly to improvements in the satellite gravity model. Inspection of specific sites reveals that changes in the algorithms used to interpolate across survey gaps with altimetry have affected some errors. Versions 9.1 through 11.1 show a bias in the scaling from gravity in milliGals to topography in meters that affected the 15-160 km wavelength band. Regionally averaged (>160 km wavelength) depths have accumulated error over successive versions 9 through 11. These problems have been mitigated in version 12.1, which shows no systematic variation of errors with depth. Even so, version 12.1 is in some respects not as good as version 8.2, which employed a different algorithm.

Design and fabrication of complete dentures using CAD/CAM technology

PubMed Central

Han, Weili; Li, Yanfeng; Zhang, Yue; lv, Yuan; Zhang, Ying; Hu, Ping; Liu, Huanyue; Ma, Zheng; Shen, Yi

2017-01-01

Abstract The aim of the study was to test the feasibility of using commercially available computer-aided design and computer-aided manufacturing (CAD/CAM) technology including 3Shape Dental System 2013 trial version, WIELAND V2.0.049 and WIELAND ZENOTEC T1 milling machine to design and fabricate complete dentures. The modeling process of full denture available in the trial version of 3Shape Dental System 2013 was used to design virtual complete dentures on the basis of 3-dimensional (3D) digital edentulous models generated from the physical models. The virtual complete dentures designed were exported to CAM software of WIELAND V2.0.049. A WIELAND ZENOTEC T1 milling machine controlled by the CAM software was used to fabricate physical dentitions and baseplates by milling acrylic resin composite plates. The physical dentitions were bonded to the corresponding baseplates to form the maxillary and mandibular complete dentures. Virtual complete dentures were successfully designed using the software through several steps including generation of 3D digital edentulous models, model analysis, arrangement of artificial teeth, trimming relief area, and occlusal adjustment. Physical dentitions and baseplates were successfully fabricated according to the designed virtual complete dentures using milling machine controlled by a CAM software. Bonding physical dentitions to the corresponding baseplates generated the final physical complete dentures. Our study demonstrated that complete dentures could be successfully designed and fabricated by using CAD/CAM. PMID:28072686

A multi-decade record of high-quality fCO2 data in version 3 of the Surface Ocean CO2 Atlas (SOCAT)

USGS Publications Warehouse

Bakker, Dorothee; Landa, Camilla S.; Pfeil, Benjamin; Metzl, Nicolas; O’Brien, Kevin; Olsen, Are; Smith, Karl; Cosca, Cathy; Harasawa, Sumiko; Nakaoka, Shin-ichiro; Jones, Stephen; Nojiri, Yukihiro; Steinhoff, Tobias; Sweeney, Colm; Schuster, Ute; Takahashi, Taro; Tilbrook, Bronte; Wada, Chisato; Wanninkhof, Rik; Alin, Simone R.; Balestrini, Carlos F.; Barbero, Leticia; Bates, Nicholas; Bianchi, Alejandro A.; Bonou, Frédéric; Boutin, Jacqueline; Bozec, Yann; Burger, Eugene F.; Cai, Wei-Jun; Castle, Robert D.; Chen, Liqi; Chierici, Melissa; Currie, Kim; Evans, Wiley; Featherstone, Charles; Feely, Richard; Fransson, Agneta; Goyet, Catherine; Greenwood, Naomi; Gregor, Luke; Hankin, Steven C.; Hardman-Mountford, Nick J.; Harlay, Jérôme; Hauck, Judith; Hoppema, Mario; Humphreys, Matthew P.; Hunt, Christopher W.; Huss, Betty; Ibánhez, J. Severino P.; Johannessen, Truls; Keeling, Ralph F.; Kitidis, Vassilis; Körtzinger, Arne; Kozyr, Alex; Krasakopoulou, Evangelia; Kuwata, Akira; Landschützer, Peter; Lauvset, Siv K.; Lefèvre, Nathalie; Lo Monaco, Claire; Manke, Ansley; Mathis, Jeremy T.; Merlivat, Liliane; Millero, Frank J.; Monteiro, Pedro M. S.; Munro, David R.; Murata, Akihiko; Newberger, Timothy; Omar, Abdirahman M.; Ono, Tsuneo; Paterson, Kristina; Pearce, David; Pierrot, Denis; Robbins, Lisa L.; Saito, Shu; Salisbury, Joe; Schlitzer, Reiner; Schneider, Bernd; Schweitzer, Roland; Sieger, Rainer; Skjelvan, Ingunn; Sullivan, Kevin F.; Sutherland, Stewart C.; Sutton, Adrienne J.; Tadokoro, Kazuaki; Telszewski, Maciej; Tuma, Matthias; van Heuven, Steven M. A. C.; Vandemark, Douglas; Ward, Brian; Watson, Andrew J.; Xu, Suqing

2016-01-01

The Surface Ocean CO2 Atlas (SOCAT) is a synthesis of quality-controlled f CO2 (fugacity of carbon dioxide) values for the global surface oceans and coastal seas with regular updates. Version 3 of SOCAT has 14.7 million f CO2 values from 3646 data sets covering the years 1957 to 2014. This latest version has an additional 4.6 million f CO2 values relative to version 2 and extends the record from 2011 to 2014. Version 3 also significantly increases the data availability for 2005 to 2013. SOCAT has an average of approximately 1.2 million surface water f CO2 values per year for the years 2006 to 2012. Quality and documentation of the data has improved. A new feature is the data set quality control (QC) flag of E for data from alternative sensors and platforms. The accuracy of surface water f CO2 has been defined for all data set QC flags. Automated range checking has been carried out for all data sets during their upload into SOCAT. The upgrade of the interactive Data Set Viewer (previously known as the Cruise Data Viewer) allows better interrogation of the SOCAT data collection and rapid creation of high-quality figures for scientific presentations. Automated data upload has been launched for version 4 and will enable more frequent SOCAT releases in the future. High-profile scientific applications of SOCAT include quantification of the ocean sink for atmospheric carbon dioxide and its long-term variation, detection of ocean acidification, as well as evaluation of coupled-climate and ocean-only biogeochemical models. Users of SOCAT data products are urged to acknowledge the contribution of data providers, as stated in the SOCAT Fair Data Use Statement. This ESSD (Earth System Science Data) “living data” publication documents the methods and data sets used for the assembly of this new version of the SOCAT data collection and compares these with those used for earlier versions of the data collection (Pfeil et al., 2013; Sabine et al., 2013; Bakker et al., 2014). 

Direct Evidence for a Dual Process Model of Deductive Inference

ERIC Educational Resources Information Center

Markovits, Henry; Brunet, Marie-Laurence; Thompson, Valerie; Brisson, Janie

2013-01-01

In 2 experiments, we tested a strong version of a dual process theory of conditional inference (cf. Verschueren et al., 2005a, 2005b) that assumes that most reasoners have 2 strategies available, the choice of which is determined by situational variables, cognitive capacity, and metacognitive control. The statistical strategy evaluates inferences…

Participant and Symbolic Modeling and the Self-Efficacy of Israeli "Street Corner" Youth Counselors.

ERIC Educational Resources Information Center

Romi, Shlomo; Teichman, Meir

1996-01-01

Examines the development and implementation of two training programs for youth advancement counselors that aim to improve counselors' self-efficacy and stress-coping abilities. Findings show that both versions positively affected self-efficacy, with self-efficacy of the subject group being significantly increased when compared to control groups.…

Simulating Conditions of Learned Helplessness: The Effects of Interventions and Attributions.

ERIC Educational Resources Information Center

Donovan, Wilberta L.; Leavitt, Lewis A.

1985-01-01

Using a version of the "learned helplessness" paradigm, assesses mothers' performance on a solvable task following pretreatments that involved exposure to an infant cry but that differed in the mothers' ability to exert control over termination of the cry. Proposes that learned helplessness models are relevant to the study of…

Improved Temperature Sounding and Quality Control Methodology Using AIRS/AMSU Data: The AIRS Science Team Version 5 Retrieval Algorithm

NASA Technical Reports Server (NTRS)

Susskind, Joel; Blaisdell, John M.; Iredell, Lena; Keita, Fricky

2009-01-01

This paper describes the AIRS Science Team Version 5 retrieval algorithm in terms of its three most significant improvements over the methodology used in the AIRS Science Team Version 4 retrieval algorithm. Improved physics in Version 5 allows for use of AIRS clear column radiances in the entire 4.3 micron CO2 absorption band in the retrieval of temperature profiles T(p) during both day and night. Tropospheric sounding 15 micron CO2 observations are now used primarily in the generation of clear column radiances .R(sub i) for all channels. This new approach allows for the generation of more accurate values of .R(sub i) and T(p) under most cloud conditions. Secondly, Version 5 contains a new methodology to provide accurate case-by-case error estimates for retrieved geophysical parameters and for channel-by-channel clear column radiances. Thresholds of these error estimates are used in a new approach for Quality Control. Finally, Version 5 also contains for the first time an approach to provide AIRS soundings in partially cloudy conditions that does not require use of any microwave data. This new AIRS Only sounding methodology, referred to as AIRS Version 5 AO, was developed as a backup to AIRS Version 5 should the AMSU-A instrument fail. Results are shown comparing the relative performance of the AIRS Version 4, Version 5, and Version 5 AO for the single day, January 25, 2003. The Goddard DISC is now generating and distributing products derived using the AIRS Science Team Version 5 retrieval algorithm. This paper also described the Quality Control flags contained in the DISC AIRS/AMSU retrieval products and their intended use for scientific research purposes.

2011 Version 6.3 Technical Support Document

EPA Pesticide Factsheets

This TSD describes how the emission inventories were prepared for air quality modeling for the years 2011, 2017, and 2025 using the 2011, version 6.2 emissions modeling platform, which is based on the 2011 National Emissions Inventory, Version 3

2011 Version 6.2 Technical Support Document

EPA Pesticide Factsheets

This TSD describes how the emission inventories were prepared for air quality modeling for the years 2011, 2017, and 2025 using the 2011, version 6.2 emissions modeling platform, which is based on the 2011 National Emissions Inventory, Version 2.

2011 Version 6.1 Technical Support Document

EPA Pesticide Factsheets

This TSD describes how the emission inventories were prepared for air quality modeling for the years 2011, 2018, and 2025 using the 2011, version 6.1 emissions modeling platform, which is based on the 2011 National Emissions Inventory, Version 1.

2011 Version 6.0 Technical Support Document

EPA Pesticide Factsheets

This TSD describes how the emission inventories were prepared for air quality modeling for the years 2011, 2018, and 2025 using the 2011, version 6.0 emissions modeling platform, which is based on the 2011 National Emissions Inventory, Version 1

Flow measurements in a water tunnel using a holocinematographic velocimeter

NASA Technical Reports Server (NTRS)

Weinstein, Leonard M.; Beeler, George B.

1987-01-01

Dual-view holographic movies were used to examine complex flows with full three-space and time resolution. This approach, which tracks the movement of small tracer particles in water, is termed holocinematographic velocimetry (HCV). A small prototype of a new water tunnel was used to demonstrate proof-of-concept for the HCV. After utilizing a conventional flow visualization apparatus with a laser light sheet to illuminate tracer particles to evaluate flow quality of the prototype tunnel, a simplified version of the HCV was employed to demonstrate the capabilities of the approach. Results indicate that a full-scale version of the water tunnel and a high performance version of the HCV should be able to check theoretical and numerical modeling of complex flows and examine the mechanisms operative in turbulent and vortex flow control concepts, providing an entirely unique instrument capable, for the first time, of simultaneous three-space and time measurements in turbulent flow.

Refined stratified-worm-burden models that incorporate specific biological features of human and snail hosts provide better estimates of Schistosoma diagnosis, transmission, and control.

PubMed

Gurarie, David; King, Charles H; Yoon, Nara; Li, Emily

2016-08-04

Schistosoma parasites sustain a complex transmission process that cycles between a definitive human host, two free-swimming larval stages, and an intermediate snail host. Multiple factors modify their transmission and affect their control, including heterogeneity in host populations and environment, the aggregated distribution of human worm burdens, and features of parasite reproduction and host snail biology. Because these factors serve to enhance local transmission, their inclusion is important in attempting accurate quantitative prediction of the outcomes of schistosomiasis control programs. However, their inclusion raises many mathematical and computational challenges. To address these, we have recently developed a tractable stratified worm burden (SWB) model that occupies an intermediate place between simpler deterministic mean worm burden models and the very computationally-intensive, autonomous agent models. To refine the accuracy of model predictions, we modified an earlier version of the SWB by incorporating factors representing essential in-host biology (parasite mating, aggregation, density-dependent fecundity, and random egg-release) into demographically structured host communities. We also revised the snail component of the transmission model to reflect a saturable form of human-to-snail transmission. The new model allowed us to realistically simulate overdispersed egg-test results observed in individual-level field data. We further developed a Bayesian-type calibration methodology that accounted for model and data uncertainties. The new model methodology was applied to multi-year, individual-level field data on S. haematobium infections in coastal Kenya. We successfully derived age-specific estimates of worm burden distributions and worm fecundity and crowding functions for children and adults. Estimates from the new SWB model were compared with those from the older, simpler SWB with some substantial differences noted. We validated our new SWB estimates in prediction of drug treatment-based control outcomes for a typical Kenyan community. The new version of the SWB model provides a better tool to predict the outcomes of ongoing schistosomiasis control programs. It reflects parasite features that augment and perpetuate transmission, while it also readily incorporates differences in diagnostic testing and human sub-population differences in treatment coverage. Once extended to other Schistosoma species and transmission environments, it will provide a useful and efficient tool for planning control and elimination strategies.

Cryogenic Pressure Control Modeling for Ellipsoidal Space Tanks in Reduced Gravity

NASA Technical Reports Server (NTRS)

Hedayat, Ali; Lopez, Alfredo; Grayson, Gary D.; Chandler, Frank O.; Hastings, Leon J.

2008-01-01

A computational fluid dynamics (CFD) model is developed to simulate pressure control of an ellipsoidal-shaped liquid hydrogen tank under external heating in low gravity. Pressure control is provided by an axial jet thermodynamic vent system (TVS) centered within the vessel that injects cooler liquid into the tank, mixing the contents and reducing tank pressure. The two-phase cryogenic tank model considers liquid hydrogen in its own vapor with liquid density varying with temperature only and a fully compressible ullage. The axisymmetric model is developed using a custom version of the commercially available FLOW-3D software and simulates low gravity extrapolations of engineering checkout tests performed at Marshall Space Flight Center in 1999 in support of the Solar Thermal Upper Stage Technology Demonstrator (STUSTD) program. Model results illustrate that stable low gravity liquid-gas interfaces are maintained during all phases of the pressure control cycle. Steady and relatively smooth ullage pressurization rates are predicted. This work advances current low gravity CFD modeling capabilities for cryogenic pressure control and aids the development of a low cost CFD-based design process for space hardware.

Simulating the 2012 High Plains Drought Using Three Single Column Models (SCM)

NASA Astrophysics Data System (ADS)

Medina, I. D.; Baker, I. T.; Denning, S.; Dazlich, D. A.

2015-12-01

The impact of changes in the frequency and severity of drought on fresh water sustainability is a great concern for many regions of the world. One such location is the High Plains, where the local economy is primarily driven by fresh water withdrawals from the Ogallala Aquifer, which accounts for approximately 30% of total irrigation withdrawals from all U.S. aquifers combined. Modeling studies that focus on the feedback mechanisms that control the climate and eco-hydrology during times of drought are limited, and have used conventional General Circulation Models (GCMs) with grid length scales ranging from one hundred to several hundred kilometers. Additionally, these models utilize crude statistical parameterizations of cloud processes for estimating sub-grid fluxes of heat and moisture and have a poor representation of land surface heterogeneity. For this research, we focus on the 2012 High Plains drought and perform numerical simulations using three single column model (SCM) versions of BUGS5 (Colorado State University (CSU) GCM coupled to the Simple Biosphere Model (SiB3)). In the first version of BUGS5, the model is used in its standard bulk setting (single atmospheric column coupled to a single instance of SiB3), secondly, the Super-Parameterized Community Atmospheric Model (SP-CAM), a cloud resolving model (CRM) (CRM consists of 32 atmospheric columns), replaces the single CSU GCM atmospheric parameterization and is coupled to a single instance of SiB3, and for the third version of BUGS5, an instance of SiB3 is coupled to each CRM column of the SP-CAM (32 CRM columns coupled to 32 instances of SiB3). To assess the physical realism of the land-atmosphere feedbacks simulated by all three versions of BUGS5, differences in simulated energy and moisture fluxes are computed between the 2011 and 2012 period and are compared to those calculated using observational data from the AmeriFlux Tower Network for the same period at the ARM Site in Lamont, OK. This research will provide a better understanding of model deficiencies in reproducing and predicting droughts in the future, which is essential to the economic, ecologic and social well being of the High Plains.

Tropical Intraseasonal Variability in Version 3 of the GFDL Atmosphere Model

NASA Astrophysics Data System (ADS)

Benedict, J. J.; Maloney, E. D.; Sobel, A. H.; Frierson, D. M.; Donner, L.

2012-12-01

Tropical intraseasonal variability is examined in version 3 of the Geophysical Fluid Dynamics Laboratory Atmosphere Model (AM3). Compared to its predecessor AM2, AM3 uses a new treatment of deep and shallow cumulus convection and mesoscale clouds. The AM3 cumulus parameterization is a mass flux-based scheme but also, unlike that in AM2, incorporates subgrid-scale vertical velocities; these play a key role in cumulus microphysical processes. The AM3 convection scheme allows multi-phase water substance produced in deep cumuli to be transported directly into mesoscale clouds, which strongly influence large-scale moisture and radiation fields. We examine four AM3 simulations, using a control model and three versions with different modifications to the deep convection scheme. In the control AM3, using a convective closure based on CAPE relaxation, both the MJO and Kelvin waves are weak compared to those in observations. By modifying the convective closure and trigger assumptions to inhibit deep cumuli, AM3 produces reasonable intraseasonal variability but a degraded mean state. MJO-like disturbances in the modified AM3 propagate eastward at roughly the observed speed in the Indian Ocean but up to twice the observed speed in the West Pacific. Distinct differences in intraseasonal convective organization and propagation exist among the modified AM3 versions. Differences in vertical diabatic heating profiles associated with the MJO are also found. The two AM3 versions with the strongest intraseasonal signals have a more prominent "bottom-heavy" heating profile leading the disturbance center and "top-heavy" heating profile following the disturbance. The more realistic heating structures are associated with an improved depiction of moisture convergence and intraseasonal convective organization in AM3.ag correlations of 850 hPa zonal wind with precipitation at (left column) 90°E and (right column) 150°E. Both fields are bandpass filtered (20-100 days) and averaged between 15°S-15°N. Solid (dashed) contours represent positive (negative) correlations that are shaded dark (light) gray if they exceed the 95% statistical significance level. We use ERAI and TRMM for the observed wind and rainfall fields. In the left panels, index reference longitudes and the 5 m/s phase speed are marked by vertical and slanted thick lines, respectively. Right panels also contain the 10 m/s phase speed line.

A model for discriminating reinforcers in time and space.

PubMed

Cowie, Sarah; Davison, Michael; Elliffe, Douglas

2016-06-01

Both the response-reinforcer and stimulus-reinforcer relation are important in discrimination learning; differential responding requires a minimum of two discriminably-different stimuli and two discriminably-different associated contingencies of reinforcement. When elapsed time is a discriminative stimulus for the likely availability of a reinforcer, choice over time may be modeled by an extension of the Davison and Nevin (1999) model that assumes that local choice strictly matches the effective local reinforcer ratio. The effective local reinforcer ratio may differ from the obtained local reinforcer ratio for two reasons: Because the animal inaccurately estimates times associated with obtained reinforcers, and thus incorrectly discriminates the stimulus-reinforcer relation across time; and because of error in discriminating the response-reinforcer relation. In choice-based timing tasks, the two responses are usually highly discriminable, and so the larger contributor to differences between the effective and obtained reinforcer ratio is error in discriminating the stimulus-reinforcer relation. Such error may be modeled either by redistributing the numbers of reinforcers obtained at each time across surrounding times, or by redistributing the ratio of reinforcers obtained at each time in the same way. We assessed the extent to which these two approaches to modeling discrimination of the stimulus-reinforcer relation could account for choice in a range of temporal-discrimination procedures. The version of the model that redistributed numbers of reinforcers accounted for more variance in the data. Further, this version provides an explanation for shifts in the point of subjective equality that occur as a result of changes in the local reinforcer rate. The inclusion of a parameter reflecting error in discriminating the response-reinforcer relation enhanced the ability of each version of the model to describe data. The ability of this class of model to account for a range of data suggests that timing, like other conditional discriminations, is choice under the joint discriminative control of elapsed time and differential reinforcement. Understanding the role of differential reinforcement is therefore critical to understanding control by elapsed time. Copyright © 2016 Elsevier B.V. All rights reserved.

2007 Version 5.0 Technical Support Document

EPA Pesticide Factsheets

Preparation of Emissions Inventories for the Version 5.0, 2007 Emissions Modeling Platform describes how emissions based on the 2008 NEI, version 2 and were processed to represent the year 2007 in support of air quality modeling of the PM NAAQS.

INM, integrated noise model, version 4.11 : user's guide, supplement

DOT National Transportation Integrated Search

1993-12-01

The Volpe National Transportation Systems Center, in support of the Federal Aviation Administration, Office of Environment and Energy, has developed Version 4.11 of the Integrated Noise Model (INM). This User's Guide is a supplement to INM, Version 3...

Digital Control of the Czochralski Growth of Gallium Arsenide. System Reference Manual. Valid for Czochralski Growth Controller Software Version 2.4

DTIC Science & Technology

1988-01-04

Controller Routine .......... ........................ 405 -viii- ’ O, ...1 . • N SList of Illustrations i p List of Illustrations . Fig. 1: A...J------ - - - 6 - -- -w -- -w -r n . w ~ - P a CGCS Program Versions ~CGCS Program Versions This section describes the "evolution" of the...8217 ~- 134 - ,d" - 1’ , n "W , ’." " a 4 r P . ’ ,’ r t r 1 "."." , . L t * 5.1 CGCS Concept and Structure 5. The Czochralski Growth Control System Software

Nifedipine as a uterine relaxant for external cephalic version: a randomized controlled trial.

PubMed

Kok, Marjolein; Bais, Joke M; van Lith, Jan M; Papatsonis, Dimitri M; Kleiverda, Gunilla; Hanny, Dahrs; Doornbos, Johannes P; Mol, Ben W; van der Post, Joris A

2008-08-01

To estimate the effectiveness of nifedipine as a uterine relaxant during external cephalic version to correct breech presentation. In this randomized, double-blind, placebo-controlled trial, women with a singleton fetus in breech presentation and a gestational age of 36 weeks or more were eligible for enrollment. Participating women received two doses of either nifedipine 10 mg or placebo, 30 and 15 minutes before the external cephalic version attempt. The primary outcome was a cephalic-presenting fetus immediately after the procedure. Secondary outcome measures were cephalic presentation at delivery, mode of delivery, and adverse events. A sample size of 292 was calculated to provide 80% power to detect a 17% improvement of the external cephalic version success rate, assuming a placebo group rate of 40% and alpha of .05. Outcome data for 310 of 320 randomly assigned participants revealed no significant difference in external cephalic version success rates between treatment (42%) and control group (37%) (relative risk 1.1, 95%; 95% confidence interval 0.85-1.5). The cesarean delivery rate was 51% in the treatment group and 46% in the control group (relative risk 1.1, 95% confidence interval 0.88-1.4). Nifedipine did not significantly improve the success of external cephalic version. Future use of nifedipine to improve the outcome of external cephalic version should be limited to large clinical trials.

The Smoking Consequences Questionnaire: Factor structure and predictive validity among Spanish-speaking Latino smokers in the United States.

PubMed

Vidrine, Jennifer Irvin; Vidrine, Damon J; Costello, Tracy J; Mazas, Carlos; Cofta-Woerpel, Ludmila; Mejia, Luz Maria; Wetter, David W

2009-11-01

Much of the existing research on smoking outcome expectancies has been guided by the Smoking Consequences Questionnaire (SCQ ). Although the original version of the SCQ has been modified over time for use in different populations, none of the existing versions have been evaluated for use among Spanish-speaking Latino smokers in the United States. The present study evaluated the factor structure and predictive validity of the 3 previously validated versions of the SCQ--the original, the SCQ-Adult, and the SCQ-Spanish, which was developed with Spanish-speaking smokers in Spain--among Spanish-speaking Latino smokers in Texas. The SCQ-Spanish represented the least complex solution. Each of the SCQ-Spanish scales had good internal consistency, and the predictive validity of the SCQ-Spanish was partially supported. Nearly all the SCQ-Spanish scales predicted withdrawal severity even after controlling for demographics and dependence. Boredom Reduction predicted smoking relapse across the 5- and 12-week follow-up assessments in a multivariate model that also controlled for demographics and dependence. Our results support use of the SCQ-Spanish with Spanish-speaking Latino smokers in the United States.

Short- and medium-term efficacy of a Web-based computer-tailored nutrition education intervention for adults including cognitive and environmental feedback: randomized controlled trial.

PubMed

Springvloet, Linda; Lechner, Lilian; de Vries, Hein; Candel, Math J J M; Oenema, Anke

2015-01-19

Web-based, computer-tailored nutrition education interventions can be effective in modifying self-reported dietary behaviors. Traditional computer-tailored programs primarily targeted individual cognitions (knowledge, awareness, attitude, self-efficacy). Tailoring on additional variables such as self-regulation processes and environmental-level factors (the home food environment arrangement and perception of availability and prices of healthy food products in supermarkets) may improve efficacy and effect sizes (ES) of Web-based computer-tailored nutrition education interventions. This study evaluated the short- and medium-term efficacy and educational differences in efficacy of a cognitive and environmental feedback version of a Web-based computer-tailored nutrition education intervention on self-reported fruit, vegetable, high-energy snack, and saturated fat intake compared to generic nutrition information in the total sample and among participants who did not comply with dietary guidelines (the risk groups). A randomized controlled trial was conducted with a basic (tailored intervention targeting individual cognition and self-regulation processes; n=456), plus (basic intervention additionally targeting environmental-level factors; n=459), and control (generic nutrition information; n=434) group. Participants were recruited from the general population and randomly assigned to a study group. Self-reported fruit, vegetable, high-energy snack, and saturated fat intake were assessed at baseline and at 1- (T1) and 4-months (T2) postintervention using online questionnaires. Linear mixed model analyses examined group differences in change over time. Educational differences were examined with group×time×education interaction terms. In the total sample, the basic (T1: ES=-0.30; T2: ES=-0.18) and plus intervention groups (T1: ES=-0.29; T2: ES=-0.27) had larger decreases in high-energy snack intake than the control group. The basic version resulted in a larger decrease in saturated fat intake than the control intervention (T1: ES=-0.19; T2: ES=-0.17). In the risk groups, the basic version caused larger decreases in fat (T1: ES=-0.28; T2: ES=-0.28) and high-energy snack intake (T1: ES=-0.34; T2: ES=-0.20) than the control intervention. The plus version resulted in a larger increase in fruit (T1: ES=0.25; T2: ES=0.37) and a larger decrease in high-energy snack intake (T1: ES=-0.38; T2: ES=-0.32) than the control intervention. For high-energy snack intake, educational differences were found. Stratified analyses showed that the plus version was most effective for high-educated participants. Both intervention versions were more effective in improving some of the self-reported dietary behaviors than generic nutrition information, especially in the risk groups, among both higher- and lower-educated participants. For fruit intake, only the plus version was more effective than providing generic nutrition information. Although feasible, incorporating environmental-level information is time-consuming. Therefore, the basic version may be more feasible for further implementation, although inclusion of feedback on the arrangement of the home food environment and on availability and prices may be considered for fruit and, for high-educated people, for high-energy snack intake. Netherlands Trial Registry NTR3396; http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=3396 (Archived by WebCite at http://www.webcitation.org/6VNZbdL6w).

Short- and Medium-Term Efficacy of a Web-Based Computer-Tailored Nutrition Education Intervention for Adults Including Cognitive and Environmental Feedback: Randomized Controlled Trial

PubMed Central

Lechner, Lilian; de Vries, Hein; Candel, Math JJM; Oenema, Anke

2015-01-01

Background Web-based, computer-tailored nutrition education interventions can be effective in modifying self-reported dietary behaviors. Traditional computer-tailored programs primarily targeted individual cognitions (knowledge, awareness, attitude, self-efficacy). Tailoring on additional variables such as self-regulation processes and environmental-level factors (the home food environment arrangement and perception of availability and prices of healthy food products in supermarkets) may improve efficacy and effect sizes (ES) of Web-based computer-tailored nutrition education interventions. Objective This study evaluated the short- and medium-term efficacy and educational differences in efficacy of a cognitive and environmental feedback version of a Web-based computer-tailored nutrition education intervention on self-reported fruit, vegetable, high-energy snack, and saturated fat intake compared to generic nutrition information in the total sample and among participants who did not comply with dietary guidelines (the risk groups). Methods A randomized controlled trial was conducted with a basic (tailored intervention targeting individual cognition and self-regulation processes; n=456), plus (basic intervention additionally targeting environmental-level factors; n=459), and control (generic nutrition information; n=434) group. Participants were recruited from the general population and randomly assigned to a study group. Self-reported fruit, vegetable, high-energy snack, and saturated fat intake were assessed at baseline and at 1- (T1) and 4-months (T2) postintervention using online questionnaires. Linear mixed model analyses examined group differences in change over time. Educational differences were examined with group×time×education interaction terms. Results In the total sample, the basic (T1: ES=–0.30; T2: ES=–0.18) and plus intervention groups (T1: ES=–0.29; T2: ES=–0.27) had larger decreases in high-energy snack intake than the control group. The basic version resulted in a larger decrease in saturated fat intake than the control intervention (T1: ES=–0.19; T2: ES=–0.17). In the risk groups, the basic version caused larger decreases in fat (T1: ES=–0.28; T2: ES=–0.28) and high-energy snack intake (T1: ES=–0.34; T2: ES=–0.20) than the control intervention. The plus version resulted in a larger increase in fruit (T1: ES=0.25; T2: ES=0.37) and a larger decrease in high-energy snack intake (T1: ES=–0.38; T2: ES=–0.32) than the control intervention. For high-energy snack intake, educational differences were found. Stratified analyses showed that the plus version was most effective for high-educated participants. Conclusions Both intervention versions were more effective in improving some of the self-reported dietary behaviors than generic nutrition information, especially in the risk groups, among both higher- and lower-educated participants. For fruit intake, only the plus version was more effective than providing generic nutrition information. Although feasible, incorporating environmental-level information is time-consuming. Therefore, the basic version may be more feasible for further implementation, although inclusion of feedback on the arrangement of the home food environment and on availability and prices may be considered for fruit and, for high-educated people, for high-energy snack intake. Trial Registration Netherlands Trial Registry NTR3396; http://www.trialregister.nl/trialreg/admin/rctview.asp?TC=3396 (Archived by WebCite at http://www.webcitation.org/6VNZbdL6w). PMID:25599828

Detailed analysis of the Japanese version of the Rapid Dementia Screening Test, revised version.

PubMed

Moriyama, Yasushi; Yoshino, Aihide; Muramatsu, Taro; Mimura, Masaru

2017-11-01

The number-transcoding task on the Japanese version of the Rapid Dementia Screening Test (RDST-J) requires mutual conversion between Arabic and Chinese numerals (209 to , 4054 to , to 681, to 2027). In this task, question and answer styles of Chinese numerals are written horizontally. We investigated the impact of changing the task so that Chinese numerals are written vertically. Subjects were 211 patients with very mild to severe Alzheimer's disease and 42 normal controls. Mini-Mental State Examination scores ranged from 26 to 12, and Clinical Dementia Rating scores ranged from 0.5 to 3. Scores of all four subtasks of the transcoding task significantly improved in the revised version compared with the original version. The sensitivity and specificity of total scores ≥9 on the RDST-J original and revised versions for discriminating between controls and subjects with Clinical Dementia Rating scores of 0.5 were 63.8% and 76.6% on the original and 60.1% and 85.8% on revised version. The revised RDST-J total score had low sensitivity and high specificity compared with the original RDST-J for discriminating subjects with Clinical Dementia Rating scores of 0.5 from controls. © 2017 Japanese Psychogeriatric Society.

Software Design Document for the AirNET Aeromodel and Weapons Model Conversion. Volume 1. Version 0.0,

DTIC Science & Technology

1993-01-22

AUGLPITCHROLLCONTROLa ttitude .-ontrol_roll_command, MAX..STABAUG3_PITCH-.ROLL..CONTROL); return ( attitude -.control-roll-commuand); static REAL set...pitch...if any). V V RETURNS: TRUE if successful, FALSE if not. V * PURPOSE: This routine performs the functions V V specifically related to the firing of a...specifically related to the flying a ADAT * missile. * void missile _adaLfly (aptr, sightiocation, locqsightto.world, tube, veh_list) ADATMISSILE

Neuraxial blockade for external cephalic version: Cost analysis.

PubMed

Yamasato, Kelly; Kaneshiro, Bliss; Salcedo, Jennifer

2015-07-01

Neuraxial blockade (epidural or spinal anesthesia/analgesia) with external cephalic version increases the external cephalic version success rate. Hospitals and insurers may affect access to neuraxial blockade for external cephalic version, but the costs to these institutions remain largely unstudied. The objective of this study was to perform a cost analysis of neuraxial blockade use during external cephalic version from hospital and insurance payer perspectives. Secondarily, we estimated the effect of neuraxial blockade on cesarean delivery rates. A decision-analysis model was developed using costs and probabilities occurring prenatally through the delivery hospital admission. Model inputs were derived from the literature, national databases, and local supply costs. Univariate and bivariate sensitivity analyses and Monte Carlo simulations were performed to assess model robustness. Neuraxial blockade was cost saving to both hospitals ($30 per delivery) and insurers ($539 per delivery) using baseline estimates. From both perspectives, however, the model was sensitive to multiple variables. Monte Carlo simulation indicated neuraxial blockade to be more costly in approximately 50% of scenarios. The model demonstrated that routine use of neuraxial blockade during external cephalic version, compared to no neuraxial blockade, prevented 17 cesarean deliveries for every 100 external cephalic versions attempted. Neuraxial blockade is associated with minimal hospital and insurer cost changes in the setting of external cephalic version, while reducing the cesarean delivery rate. © 2015 The Authors. Journal of Obstetrics and Gynaecology Research © 2015 Japan Society of Obstetrics and Gynecology.

Neuraxial blockade for external cephalic version: Cost analysis

PubMed Central

Yamasato, Kelly; Kaneshiro, Bliss; Salcedo, Jennifer

2017-01-01

Aim Neuraxial blockade (epidural or spinal anesthesia/analgesia) with external cephalic version increases the external cephalic version success rate. Hospitals and insurers may affect access to neuraxial blockade for external cephalic version, but the costs to these institutions remain largely unstudied. The objective of this study was to perform a cost analysis of neuraxial blockade use during external cephalic version from hospital and insurance payer perspectives. Secondarily, we estimated the effect of neuraxial blockade on cesarean delivery rates. Methods A decision–analysis model was developed using costs and probabilities occurring prenatally through the delivery hospital admission. Model inputs were derived from the literature, national databases, and local supply costs. Univariate and bivariate sensitivity analyses and Monte Carlo simulations were performed to assess model robustness. Results Neuraxial blockade was cost saving to both hospitals ($30 per delivery) and insurers ($539 per delivery) using baseline estimates. From both perspectives, however, the model was sensitive to multiple variables. Monte Carlo simulation indicated neuraxial blockade to be more costly in approximately 50% of scenarios. The model demonstrated that routine use of neuraxial blockade during external cephalic version, compared to no neuraxial blockade, prevented 17 cesarean deliveries for every 100 external cephalic versions attempted. Conclusions Neuraxial blockade is associated with minimal hospital and insurer cost changes in the setting of external cephalic version, while reducing the cesarean delivery rate. PMID:25771920

Stable Direct Adaptive Control of Linear Infinite-dimensional Systems Using a Command Generator Tracker Approach

NASA Technical Reports Server (NTRS)

Balas, M. J.; Kaufman, H.; Wen, J.

1985-01-01

A command generator tracker approach to model following contol of linear distributed parameter systems (DPS) whose dynamics are described on infinite dimensional Hilbert spaces is presented. This method generates finite dimensional controllers capable of exponentially stable tracking of the reference trajectories when certain ideal trajectories are known to exist for the open loop DPS; we present conditions for the existence of these ideal trajectories. An adaptive version of this type of controller is also presented and shown to achieve (in some cases, asymptotically) stable finite dimensional control of the infinite dimensional DPS.

A Method of Relating General Circulation Model Simulated Climate to the Observed Local Climate. Part I: Seasonal Statistics.

NASA Astrophysics Data System (ADS)

Karl, Thomas R.; Wang, Wei-Chyung; Schlesinger, Michael E.; Knight, Richard W.; Portman, David

1990-10-01

Important surface observations such as the daily maximum and minimum temperature, daily precipitation, and cloud ceilings often have localized characteristics that are difficult to reproduce with the current resolution and the physical parameterizations in state-of-the-art General Circulation climate Models (GCMs). Many of the difficulties can be partially attributed to mismatches in scale, local topography. regional geography and boundary conditions between models and surface-based observations. Here, we present a method, called climatological projection by model statistics (CPMS), to relate GCM grid-point flee-atmosphere statistics, the predictors, to these important local surface observations. The method can be viewed as a generalization of the model output statistics (MOS) and perfect prog (PP) procedures used in numerical weather prediction (NWP) models. It consists of the application of three statistical methods: 1) principle component analysis (FICA), 2) canonical correlation, and 3) inflated regression analysis. The PCA reduces the redundancy of the predictors The canonical correlation is used to develop simultaneous relationships between linear combinations of the predictors, the canonical variables, and the surface-based observations. Finally, inflated regression is used to relate the important canonical variables to each of the surface-based observed variables.We demonstrate that even an early version of the Oregon State University two-level atmospheric GCM (with prescribed sea surface temperature) produces free-atmosphere statistics than can, when standardized using the model's internal means and variances (the MOS-like version of CPMS), closely approximate the observed local climate. When the model data are standardized by the observed free-atmosphere means and variances (the PP version of CPMS), however, the model does not reproduce the observed surface climate as well. Our results indicate that in the MOS-like version of CPMS the differences between the output of a ten-year GCM control run and the surface-based observations are often smaller than the differences between the observations of two ten-year periods. Such positive results suggest that GCMs may already contain important climatological information that can be used to infer the local climate.

Altered spatial learning and delay discounting in a rat model of human third trimester binge ethanol exposure

PubMed Central

Bañuelos, Cristina; Gilbert, Ryan J.; Montgomery, Karienn S.; Fincher, Annette S.; Wang, Haiying; Frye, Gerald D.; Setlow, Barry; Bizon, Jennifer L.

2012-01-01

Ethanol exposure during perinatal development can cause cognitive abnormalities including difficulties in learning, attention, and memory, as well as heightened impulsivity. The purpose of this study was to assess performance in spatial learning and impulsive choice tasks in rats subjected to an intragastric intubation model of binge ethanol exposure during human third trimester-equivalent brain development. Male and female Sprague–Dawley rat pups were intubated with ethanol (5.25 g/kg/day) on postnatal days 4–9. At adolescence (between postnatal days 35–38), these rats and sham intubated within-litter controls were trained in both spatial and cued versions of the Morris water maze. A subset of the male rats was subsequently tested on a delay-discounting task to assess impulsive choice. Ethanol-exposed rats were spatially impaired relative to controls, but performed comparably to controls on the cued version of the water maze. Ethanol-exposed rats also showed greater preference for large delayed rewards on the delay discounting task, but no evidence for altered reward sensitivity or perseverative behavior. These data demonstrate that early postnatal intermittent binge-like ethanol exposure has prolonged, detrimental, but selective effects on cognition, suggesting that even relatively brief ethanol exposure late in human pregnancy can be deleterious for cognitive function. PMID:22129556

[Confirmative study of a French version of the Exercise Dependence Scale-revised with a French population].

PubMed

Allegre, B; Therme, P

2008-10-01

Since the first writings on excessive exercise, there has been an increased interest in exercise dependence. One of the major consequences of this increased interest has been the development of several definitions and measures of exercise dependence. The work of Veale [Does primary exercise dependence really exist? In: Annet J, Cripps B, Steinberg H, editors. Exercise addiction: Motivation for participation in sport and exercise.Leicester, UK: Br Psychol Soc; 1995. p. 1-5.] provides an advance for the definition and measure of exercise dependence. These studies have adapted the DSM-IV criteria for substance dependence to measure exercise dependence. The Exercise Dependence Scale-Revised is based on these diagnostic criteria, which are: tolerance; withdrawal effects; intention effect; lack of control; time; reductions in other activities; continuance. Confirmatory factor analyses of EDS-R provided support to present a measurement model (21 items loaded in seven factors) of EDS-R (Comparative Fit Index=0.97; Root mean Square Error of Approximation=0.05; Tucker-Lewis Index=0.96). The aim of this study was to examine the psychometric properties of a French version of the EDS-R [Factorial validity and psychometric examination of the exercise dependence scale-revised. Meas Phys Educ Exerc Sci 2004;8(4):183-201.] to test the stability of the seven-factor model of the original version with a French population. A total of 516 half-marathoners ranged in age from 17 to 74 years old (Mean age=39.02 years, ET=10.64), with 402 men (77.9%) and 114 women (22.1%) participated in the study. The principal component analysis results in a six-factor structure, which accounts for 68.60% of the total variance. Because principal component analysis presents a six-factor structure differing from the original seven-factor structure, two models were tested, using confirmatory factor analysis. The first model is the seven-factor model of the original version of the EDS-R and the second is the model produced by the principal component analysis. The results of confirmatory factor analysis presented the original model (with a seven-factor structure) as a good model and fit indices were good (X(2)/ddl=2.89, Root Mean Square Error of Approximation (RMSEA)=0.061, Expected Cross Validation Index (ECVI)=1.20, Goodness-of-Fit Index (GFI)=0.92, Comparative Fit Index (CFI)=0.94, Standardized Root Mean Square (SRMS)=0.048). These results showed that the French version of EDS-R has an identical factor structure to the original. Therefore, the French version of EDS-R was an acceptable scale to measure exercise dependence and can be used on a French population.

Competition for light between individual trees lowers reference canopy stomatal conductance: Results from a model

NASA Astrophysics Data System (ADS)

Loranty, Michael M.; Mackay, D. Scott; Ewers, Brent E.; Traver, Elizabeth; Kruger, Eric L.

2010-12-01

We have used an ecosystem model, TREES (Terrestrial Regional Ecosystem Exchange Simulator), to test the hypothesis that competition for light limits reference canopy stomatal conductance (GSref; conductance at 1 kPa vapor pressure deficit) for individual tree crowns. Sap flux (JS) data was collected at an aspen-dominated unmanaged early successional site, and at a sugar maple dominated midsuccessional site managed for timber production. Using a Monte Carlo approach, JS scaled canopy transpiration (EC) estimates were used to parameterize two versions of the model for each tree individually; a control model treated trees as isolated individuals, and a modified version incorporated the shading effects of neighboring individuals on incident radiation. Agreement between simulated and observed EC was better for maple than for aspen using the control model. Accounting for canopy heterogeneity using a three-dimensional canopy representation had minimal effects on estimates of GSref or model performance for individual maples. At the Aspen site the modified model resulted in improved EC estimates, particularly for trees with lower GSref and more shading by neighboring individuals. Our results imply a link between photosynthetic capacity, as mediated by competitive light environment, and GSref. We conclude that accounting for the effects of canopy heterogeneity on incident radiation improves modeled estimates of canopy carbon and water fluxes, especially for shade intolerant species. Furthermore our results imply a link between ecosystem structure and function that may be exploited to elucidate the impacts of forest structural heterogeneity on ecosystem fluxes of carbon and water via LiDAR remote sensing.

An event-version-based spatio-temporal modeling approach and its application in the cadastral management

NASA Astrophysics Data System (ADS)

Li, Yangdong; Han, Zhen; Liao, Zhongping

2009-10-01

Spatiality, temporality, legality, accuracy and continuality are characteristic of cadastral information, and the cadastral management demands that the cadastral data should be accurate, integrated and updated timely. It's a good idea to build an effective GIS management system to manage the cadastral data which are characterized by spatiality and temporality. Because no sound spatio-temporal data models have been adopted, however, the spatio-temporal characteristics of cadastral data are not well expressed in the existing cadastral management systems. An event-version-based spatio-temporal modeling approach is first proposed from the angle of event and version. Then with the help of it, an event-version-based spatio-temporal cadastral data model is built to represent spatio-temporal cadastral data. At last, the previous model is used in the design and implementation of a spatio-temporal cadastral management system. The result of the application of the system shows that the event-version-based spatio-temporal data model is very suitable for the representation and organization of cadastral data.

Comparison of experiment with calculations using curvature-corrected zero and two equation turbulence models for a two-dimensional U-duct

NASA Astrophysics Data System (ADS)

Monson, D. J.; Seegmiller, H. L.; McConnaughey, P. K.

1990-06-01

In this paper experimental measurements are compared with Navier-Stokes calculations using seven different turbulence models for the internal flow in a two-dimensional U-duct. The configuration is representative of many internal flows of engineering interst that experience strong curvature. In an effort to improve agreement, this paper tests several versions of the two-equation k-epsilon turbulence model including the standard version, an extended version with a production range time scale, and a version that includes curvature time scales. Each is tested in its high and low Reynolds number formulations. Calculations using these new models and the original mixing length model are compared here with measurements of mean and turbulence velocities, static pressure and skin friction in the U-duct at two Reynolds numbers. The comparisons show that only the low Reynolds number version of the extended k-epsilon model does a reasonable job of predicting the important features of this flow at both Reynolds numbers tested.

Elastic full waveform inversion based on the homogenization method: theoretical framework and 2-D numerical illustrations

NASA Astrophysics Data System (ADS)

Capdeville, Yann; Métivier, Ludovic

2018-05-01

Seismic imaging is an efficient tool to investigate the Earth interior. Many of the different imaging techniques currently used, including the so-called full waveform inversion (FWI), are based on limited frequency band data. Such data are not sensitive to the true earth model, but to a smooth version of it. This smooth version can be related to the true model by the homogenization technique. Homogenization for wave propagation in deterministic media with no scale separation, such as geological media, has been recently developed. With such an asymptotic theory, it is possible to compute an effective medium valid for a given frequency band such that effective waveforms and true waveforms are the same up to a controlled error. In this work we make the link between limited frequency band inversion, mainly FWI, and homogenization. We establish the relation between a true model and an FWI result model. This relation is important for a proper interpretation of FWI images. We numerically illustrate, in the 2-D case, that an FWI result is at best the homogenized version of the true model. Moreover, it appears that the homogenized FWI model is quite independent of the FWI parametrization, as long as it has enough degrees of freedom. In particular, inverting for the full elastic tensor is, in each of our tests, always a good choice. We show how the homogenization can help to understand FWI behaviour and help to improve its robustness and convergence by efficiently constraining the solution space of the inverse problem.

Early Number Skills: Examining the Effects of Class-Wide Interventions on Kindergarten Performance

ERIC Educational Resources Information Center

Codding, Robin S.; Chan-Iannetta, Lisa; George, Shauna; Ferreira, Kristine; Volpe, Robert

2011-01-01

The purpose of this study was to use multilevel modeling to compare the effects of KPALS alone and combined with goal setting and reinforcement to a control condition on early numeracy performance of 96 kindergarteners. Demographic variables were examined as moderators. Results differed according to early numeracy measure, with both versions of…

Near Real-Time Automatic Data Quality Controls for the AERONET Version 3 Database: An Introduction to the New Level 1.5V Aerosol Optical Depth Data Product

NASA Astrophysics Data System (ADS)

Giles, D. M.; Holben, B. N.; Smirnov, A.; Eck, T. F.; Slutsker, I.; Sorokin, M. G.; Espenak, F.; Schafer, J.; Sinyuk, A.

2015-12-01

The Aerosol Robotic Network (AERONET) has provided a database of aerosol optical depth (AOD) measured by surface-based Sun/sky radiometers for over 20 years. AERONET provides unscreened (Level 1.0) and automatically cloud cleared (Level 1.5) AOD in near real-time (NRT), while manually inspected quality assured (Level 2.0) AOD are available after instrument field deployment (Smirnov et al., 2000). The growing need for NRT quality controlled aerosol data has become increasingly important. Applications of AERONET NRT data include the satellite evaluation (e.g., MODIS, VIIRS, MISR, OMI), data synergism (e.g., MPLNET), verification of aerosol forecast models and reanalysis (e.g., GOCART, ICAP, NAAPS, MERRA), input to meteorological models (e.g., NCEP, ECMWF), and field campaign support (e.g., KORUS-AQ, ORACLES). In response to user needs for quality controlled NRT data sets, the new Version 3 (V3) Level 1.5V product was developed with similar quality controls as those applied by hand to the Version 2 (V2) Level 2.0 data set. The AERONET cloud screened (Level 1.5) NRT AOD database can be significantly impacted by data anomalies. The most significant data anomalies include AOD diurnal dependence due to contamination or obstruction of the sensor head windows, anomalous AOD spectral dependence due to problems with filter degradation, instrument gains, or non-linear changes in calibration, and abnormal changes in temperature sensitive wavelengths (e.g., 1020nm) in response to anomalous sensor head temperatures. Other less common AOD anomalies result from loose filters, uncorrected clock shifts, connection and electronic issues, and various solar eclipse episodes. Automatic quality control algorithms are applied to the new V3 Level 1.5 database to remove NRT AOD anomalies and produce the new AERONET V3 Level 1.5V AOD product. Results of the quality control algorithms are presented and the V3 Level 1.5V AOD database is compared to the V2 Level 2.0 AOD database.

Effects on readiness to change of an educational intervention on depressive disorders for general physicians in primary care based on a modified Prochaska model--a randomized controlled study.

PubMed

Shirazi, M; Zeinaloo, A A; Parikh, S V; Sadeghi, M; Taghva, A; Arbabi, M; Kashani, A Sabouri; Alaeddini, F; Lonka, K; Wahlström, R

2008-04-01

The Prochaska model of readiness to change has been proposed to be used in educational interventions to improve medical care. To evaluate the impact on readiness to change of an educational intervention on management of depressive disorders based on a modified version of the Prochaska model in comparison with a standard programme of continuing medical education (CME). This is a randomized controlled trial within primary care practices in southern Tehran, Iran. The participants included 192 general physicians working in primary care (GPs) were recruited after random selection and randomized to intervention (96) and control (96). Intervention consisted of interactive, learner-centred educational methods in large and small group settings depending on the GPs' stages of readiness to change. Change in stage of readiness to change measured by the modified version of the Prochaska questionnaire was the The final number of participants was 78 (81%) in the intervention arm and 81 (84%) in the control arm. Significantly (P < 0.01), more GPs (57/96 = 59% versus 12/96 = 12%) in the intervention group changed to higher stages of readiness to change. The intervention effect was 46% points (P < 0.001) and 50% points (P < 0.001) in the large and small group setting, respectively. Educational formats that suit different stages of learning can support primary care doctors to reach higher stages of behavioural change in the topic of depressive disorders. Our findings have practical implications for conducting CME programmes in Iran and are possibly also applicable in other parts of the world.

Nonlinear predictive control for durability enhancement and efficiency improvement in a fuel cell power system

NASA Astrophysics Data System (ADS)

Luna, Julio; Jemei, Samir; Yousfi-Steiner, Nadia; Husar, Attila; Serra, Maria; Hissel, Daniel

2016-10-01

In this work, a nonlinear model predictive control (NMPC) strategy is proposed to improve the efficiency and enhance the durability of a proton exchange membrane fuel cell (PEMFC) power system. The PEMFC controller is based on a distributed parameters model that describes the nonlinear dynamics of the system, considering spatial variations along the gas channels. Parasitic power from different system auxiliaries is considered, including the main parasitic losses which are those of the compressor. A nonlinear observer is implemented, based on the discretised model of the PEMFC, to estimate the internal states. This information is included in the cost function of the controller to enhance the durability of the system by means of avoiding local starvation and inappropriate water vapour concentrations. Simulation results are presented to show the performance of the proposed controller over a given case study in an automotive application (New European Driving Cycle). With the aim of representing the most relevant phenomena that affects the PEMFC voltage, the simulation model includes a two-phase water model and the effects of liquid water on the catalyst active area. The control model is a simplified version that does not consider two-phase water dynamics.

Solar Advisor Model User Guide for Version 2.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

Gilman, P.; Blair, N.; Mehos, M.

2008-08-01

The Solar Advisor Model (SAM) provides a consistent framework for analyzing and comparing power system costs and performance across the range of solar technologies and markets, from photovoltaic systems for residential and commercial markets to concentrating solar power and large photovoltaic systems for utility markets. This manual describes Version 2.0 of the software, which can model photovoltaic and concentrating solar power technologies for electric applications for several markets. The current version of the Solar Advisor Model does not model solar heating and lighting technologies.

CARE 3, Version 4 enhancements

NASA Technical Reports Server (NTRS)

Bryant, L. A.; Stiffler, J. J.

1985-01-01

The enhancements and error corrections to CARE III Version 4 are listed. All changes to Version 4 with the exception of the internal redundancy model were implemented in Version 5. Version 4 is the first public release version for execution on the CDC Cyber 170 series computers. Version 5 is the second release version and it is written in ANSI standard FORTRAN 77 for execution on the DEC VAX 11/700 series computers and many others.

The DIVA model: A neural theory of speech acquisition and production

PubMed Central

Tourville, Jason A.; Guenther, Frank H.

2013-01-01

The DIVA model of speech production provides a computationally and neuroanatomically explicit account of the network of brain regions involved in speech acquisition and production. An overview of the model is provided along with descriptions of the computations performed in the different brain regions represented in the model. The latest version of the model, which contains a new right-lateralized feedback control map in ventral premotor cortex, will be described, and experimental results that motivated this new model component will be discussed. Application of the model to the study and treatment of communication disorders will also be briefly described. PMID:23667281

Building energy simulation in real time through an open standard interface

DOE PAGES

Pang, Xiufeng; Nouidui, Thierry S.; Wetter, Michael; ...

2015-10-20

Building energy models (BEMs) are typically used for design and code compliance for new buildings and in the renovation of existing buildings to predict energy use. We present the increasing adoption of BEM as standard practice in the building industry presents an opportunity to extend the use of BEMs into construction, commissioning and operation. In 2009, the authors developed a real-time simulation framework to execute an EnergyPlus model in real time to improve building operation. This paper reports an enhancement of that real-time energy simulation framework. The previous version only works with software tools that implement the custom co-simulation interfacemore » of the Building Controls Virtual Test Bed (BCVTB), such as EnergyPlus, Dymola and TRNSYS. The new version uses an open standard interface, the Functional Mockup Interface (FMI), to provide a generic interface to any application that supports the FMI protocol. In addition, the new version utilizes the Simple Measurement and Actuation Profile (sMAP) tool as the data acquisition system to acquire, store and present data. Lastly, this paper introduces the updated architecture of the real-time simulation framework using FMI and presents proof-of-concept demonstration results which validate the new framework.« less

Optimising and communicating options for the control of invasive plant disease when there is epidemiological uncertainty.

PubMed

Cunniffe, Nik J; Stutt, Richard O J H; DeSimone, R Erik; Gottwald, Tim R; Gilligan, Christopher A

2015-04-01

Although local eradication is routinely attempted following introduction of disease into a new region, failure is commonplace. Epidemiological principles governing the design of successful control are not well-understood. We analyse factors underlying the effectiveness of reactive eradication of localised outbreaks of invading plant disease, using citrus canker in Florida as a case study, although our results are largely generic, and apply to other plant pathogens (as we show via our second case study, citrus greening). We demonstrate how to optimise control via removal of hosts surrounding detected infection (i.e. localised culling) using a spatially-explicit, stochastic epidemiological model. We show how to define optimal culling strategies that take account of stochasticity in disease spread, and how the effectiveness of disease control depends on epidemiological parameters determining pathogen infectivity, symptom emergence and spread, the initial level of infection, and the logistics and implementation of detection and control. We also consider how optimal culling strategies are conditioned on the levels of risk acceptance/aversion of decision makers, and show how to extend the analyses to account for potential larger-scale impacts of a small-scale outbreak. Control of local outbreaks by culling can be very effective, particularly when started quickly, but the optimum strategy and its performance are strongly dependent on epidemiological parameters (particularly those controlling dispersal and the extent of any cryptic infection, i.e. infectious hosts prior to symptoms), the logistics of detection and control, and the level of local and global risk that is deemed to be acceptable. A version of the model we developed to illustrate our methodology and results to an audience of stakeholders, including policy makers, regulators and growers, is available online as an interactive, user-friendly interface at http://www.webidemics.com/. This version of our model allows the complex epidemiological principles that underlie our results to be communicated to a non-specialist audience.

Optimising and Communicating Options for the Control of Invasive Plant Disease When There Is Epidemiological Uncertainty

PubMed Central

Cunniffe, Nik J.; Stutt, Richard O. J. H.; DeSimone, R. Erik; Gottwald, Tim R.; Gilligan, Christopher A.

2015-01-01

Although local eradication is routinely attempted following introduction of disease into a new region, failure is commonplace. Epidemiological principles governing the design of successful control are not well-understood. We analyse factors underlying the effectiveness of reactive eradication of localised outbreaks of invading plant disease, using citrus canker in Florida as a case study, although our results are largely generic, and apply to other plant pathogens (as we show via our second case study, citrus greening). We demonstrate how to optimise control via removal of hosts surrounding detected infection (i.e. localised culling) using a spatially-explicit, stochastic epidemiological model. We show how to define optimal culling strategies that take account of stochasticity in disease spread, and how the effectiveness of disease control depends on epidemiological parameters determining pathogen infectivity, symptom emergence and spread, the initial level of infection, and the logistics and implementation of detection and control. We also consider how optimal culling strategies are conditioned on the levels of risk acceptance/aversion of decision makers, and show how to extend the analyses to account for potential larger-scale impacts of a small-scale outbreak. Control of local outbreaks by culling can be very effective, particularly when started quickly, but the optimum strategy and its performance are strongly dependent on epidemiological parameters (particularly those controlling dispersal and the extent of any cryptic infection, i.e. infectious hosts prior to symptoms), the logistics of detection and control, and the level of local and global risk that is deemed to be acceptable. A version of the model we developed to illustrate our methodology and results to an audience of stakeholders, including policy makers, regulators and growers, is available online as an interactive, user-friendly interface at http://www.webidemics.com/. This version of our model allows the complex epidemiological principles that underlie our results to be communicated to a non-specialist audience. PMID:25874622

COMPUTATIONAL ASPECTS OF THE AIR QUALITY FORECASTING VERSION OF CMAQ (CMAQ-F)

EPA Science Inventory

The air quality forecast version of the Community Modeling Air Quality (CMAQ) model (CMAQ-F) was developed from the public release version of CMAQ (available from http://www.cmascenter.org), and is running operationally at the National Weather Service's National Centers for Envir...

Competition between plant functional types in the Canadian Terrestrial Ecosystem Model (CTEM) v. 2.0

NASA Astrophysics Data System (ADS)

Melton, J. R.; Arora, V. K.

2015-06-01

The Canadian Terrestrial Ecosystem Model (CTEM) is the interactive vegetation component in the Earth system model of the Canadian Centre for Climate Modelling and Analysis. CTEM models land-atmosphere exchange of CO2 through the response of carbon in living vegetation, and dead litter and soil pools, to changes in weather and climate at timescales of days to centuries. Version 1.0 of CTEM uses prescribed fractional coverage of plant functional types (PFTs) although, in reality, vegetation cover continually adapts to changes in climate, atmospheric composition, and anthropogenic forcing. Changes in the spatial distribution of vegetation occur on timescales of years to centuries as vegetation distributions inherently have inertia. Here, we present version 2.0 of CTEM which includes a representation of competition between PFTs based on a modified version of the Lotka-Volterra (L-V) predator-prey equations. Our approach is used to dynamically simulate the fractional coverage of CTEM's seven natural, non-crop PFTs which are then compared with available observation-based estimates. Results from CTEM v. 2.0 show the model is able to represent the broad spatial distributions of its seven PFTs at the global scale. However, differences remain between modelled and observation-based fractional coverages of PFTs since representing the multitude of plant species globally, with just seven non-crop PFTs, only captures the large scale climatic controls on PFT distributions. As expected, PFTs that exist in climate niches are difficult to represent either due to the coarse spatial resolution of the model, and the corresponding driving climate, or the limited number of PFTs used. We also simulate the fractional coverages of PFTs using unmodified L-V equations to illustrate its limitations. The geographic and zonal distributions of primary terrestrial carbon pools and fluxes from the versions of CTEM that use prescribed and dynamically simulated fractional coverage of PFTs compare reasonably well with each other and observation-based estimates. The parametrization of competition between PFTs in CTEM v. 2.0 based on the modified L-V equations behaves in a reasonably realistic manner and yields a tool with which to investigate the changes in spatial distribution of vegetation in response to future changes in climate.

Competition between plant functional types in the Canadian Terrestrial Ecosystem Model (CTEM) v. 2.0

NASA Astrophysics Data System (ADS)

Melton, J. R.; Arora, V. K.

2016-01-01

The Canadian Terrestrial Ecosystem Model (CTEM) is the interactive vegetation component in the Earth system model of the Canadian Centre for Climate Modelling and Analysis. CTEM models land-atmosphere exchange of CO2 through the response of carbon in living vegetation, and dead litter and soil pools, to changes in weather and climate at timescales of days to centuries. Version 1.0 of CTEM uses prescribed fractional coverage of plant functional types (PFTs) although, in reality, vegetation cover continually adapts to changes in climate, atmospheric composition and anthropogenic forcing. Changes in the spatial distribution of vegetation occur on timescales of years to centuries as vegetation distributions inherently have inertia. Here, we present version 2.0 of CTEM, which includes a representation of competition between PFTs based on a modified version of the Lotka-Volterra (L-V) predator-prey equations. Our approach is used to dynamically simulate the fractional coverage of CTEM's seven natural, non-crop PFTs, which are then compared with available observation-based estimates. Results from CTEM v. 2.0 show the model is able to represent the broad spatial distributions of its seven PFTs at the global scale. However, differences remain between modelled and observation-based fractional coverage of PFTs since representing the multitude of plant species globally, with just seven non-crop PFTs, only captures the large-scale climatic controls on PFT distributions. As expected, PFTs that exist in climate niches are difficult to represent either due to the coarse spatial resolution of the model, and the corresponding driving climate, or the limited number of PFTs used. We also simulate the fractional coverage of PFTs using unmodified L-V equations to illustrate its limitations. The geographic and zonal distributions of primary terrestrial carbon pools and fluxes from the versions of CTEM that use prescribed and dynamically simulated fractional coverage of PFTs compare reasonably well with each other and observation-based estimates. The parametrization of competition between PFTs in CTEM v. 2.0 based on the modified L-V equations behaves in a reasonably realistic manner and yields a tool with which to investigate the changes in spatial distribution of vegetation in response to future changes in climate.

A users manual for the method of moments Aircraft Modeling Code (AMC), version 2

NASA Technical Reports Server (NTRS)

Peters, M. E.; Newman, E. H.

1994-01-01

This report serves as a user's manual for Version 2 of the 'Aircraft Modeling Code' or AMC. AMC is a user-oriented computer code, based on the method of moments (MM), for the analysis of the radiation and/or scattering from geometries consisting of a main body or fuselage shape with attached wings and fins. The shape of the main body is described by defining its cross section at several stations along its length. Wings, fins, rotor blades, and radiating monopoles can then be attached to the main body. Although AMC was specifically designed for aircraft or helicopter shapes, it can also be applied to missiles, ships, submarines, jet inlets, automobiles, spacecraft, etc. The problem geometry and run control parameters are specified via a two character command language input format. This report describes the input command language and also includes several examples which illustrate typical code inputs and outputs.

Scale model test results of several STOVL ventral nozzle concepts

NASA Technical Reports Server (NTRS)

Meyer, B. E.; Re, R. J.; Yetter, J. A.

1991-01-01

Short take-off and vertical landing (STOVL) ventral nozzle concepts are investigated by means of a static cold flow scale model at a NASA facility. The internal aerodynamic performance characteristics of the cruise, transition, and vertical lift modes are considered for four ventral nozzle types. The nozzle configurations examined include those with: butterfly-type inner doors and vectoring exit vanes; circumferential inner doors and thrust vectoring vanes; a three-port segmented version with circumferential inner doors; and a two-port segmented version with cylindrical nozzle exit shells. During the testing, internal and external pressure is measured, and the thrust and flow coefficients and resultant vector angles are obtained. The inner door used for ventral nozzle flow control is found to affect performance negatively during the initial phase of transition. The best thrust performance is demonstrated by the two-port segmented ventral nozzle due to the elimination of the inner door.

TheInternational Index of Erectile Function (IIEF-15): psychometric properties of the Portuguese version.

PubMed

Quinta Gomes, Ana Luísa; Nobre, Pedro

2012-01-01

The International Index of Erectile Function (IIEF) is a brief, reliable, and multidimensional scale for assessing sexual function in men in both research and clinical trials. The objective of the present study was to determine the psychometric properties of the Portuguese version of the IIEF. A total of 1,363 Portuguese men participated in this study (a clinical sample of 37 men and a community sample of 1,326 men). All participants completed a questionnaire regarding demographic information and the IIEF. Principal component analysis using varimax rotation indicated a two-factor structure explaining approximately 55% of the total variance (one factor encompassing erection and orgasmic function domains of the original IIEF, and a second factor corresponding to sexual desire, intercourse, and overall satisfaction). The differentiated factor structure with five separate domains of sexual function was not replicated in the Portuguese version. The two-factor model and the original five-factor model of male sexual function were assessed with confirmatory factor analysis (CFA), and overall acceptable fits were demonstrated for both models. However, despite a non-optimal performance, CFA provided a better support for the five-factor solution as the model that best fitted the data. An important lack of discriminant validity evidenced by high intercorrelations among dimensions was detected in both models, suggesting a substantial overlap among factors. Reliability studies showed good internal consistency for the five subscales, and test-retest reliability analysis supported the stability of the measure over time. Discriminant validity confirmed the ability of both subscales to differentiate men with erectile dysfunction from matched controls. Results suggested that the Portuguese version of the IIEF has adequate psychometric properties, and its use is recommended for clinical and research purposes. Further studies are needed in order to elucidate the association among dimensions of male sexual function and, ultimately, to offer a clearer conceptualization of male's sexual response. © 2011 International Society for Sexual Medicine.

Quantum memories and Landauer's principle

NASA Astrophysics Data System (ADS)

Alicki, Robert

2011-10-01

Two types of arguments concerning (im)possibility of constructing a scalable, exponentially stable quantum memory equipped with Hamiltonian controls are discussed. The first type concerns ergodic properties of open Kitaev models which are considered as promising candidates for such memories. It is shown that, although the 4D Kitaev model provides stable qubit observables, the Hamiltonian control is not possible. The thermodynamical approach leads to the new proposal of the revised version of Landauer's principle and suggests that the existence of quantum memory implies the existence of the perpetuum mobile of the second kind. Finally, a discussion of the stability property of information and its implications is presented.

Parallel computation for biological sequence comparison: comparing a portable model to the native model for the Intel Hypercube.

PubMed

Nadkarni, P M; Miller, P L

1991-01-01

A parallel program for inter-database sequence comparison was developed on the Intel Hypercube using two models of parallel programming. One version was built using machine-specific Hypercube parallel programming commands. The other version was built using Linda, a machine-independent parallel programming language. The two versions of the program provide a case study comparing these two approaches to parallelization in an important biological application area. Benchmark tests with both programs gave comparable results with a small number of processors. As the number of processors was increased, the Linda version was somewhat less efficient. The Linda version was also run without change on Network Linda, a virtual parallel machine running on a network of desktop workstations.

Trace contaminant control simulation computer program, version 8.1

NASA Technical Reports Server (NTRS)

Perry, J. L.

1994-01-01

The Trace Contaminant Control Simulation computer program is a tool for assessing the performance of various process technologies for removing trace chemical contamination from a spacecraft cabin atmosphere. Included in the simulation are chemical and physical adsorption by activated charcoal, chemical adsorption by lithium hydroxide, absorption by humidity condensate, and low- and high-temperature catalytic oxidation. Means are provided for simulating regenerable as well as nonregenerable systems. The program provides an overall mass balance of chemical contaminants in a spacecraft cabin given specified generation rates. Removal rates are based on device flow rates specified by the user and calculated removal efficiencies based on cabin concentration and removal technology experimental data. Versions 1.0 through 8.0 are documented in NASA TM-108409. TM-108409 also contains a source file listing for version 8.0. Changes to version 8.0 are documented in this technical memorandum and a source file listing for the modified version, version 8.1, is provided. Detailed descriptions for the computer program subprograms are extracted from TM-108409 and modified as necessary to reflect version 8.1. Version 8.1 supersedes version 8.0. Information on a separate user's guide is available from the author.

Improved Methodology for Surface and Atmospheric Soundings, Error Estimates, and Quality Control Procedures: the AIRS Science Team Version-6 Retrieval Algorithm

NASA Technical Reports Server (NTRS)

Susskind, Joel; Blaisdell, John; Iredell, Lena

2014-01-01

The AIRS Science Team Version-6 AIRS/AMSU retrieval algorithm is now operational at the Goddard DISC. AIRS Version-6 level-2 products are generated near real-time at the Goddard DISC and all level-2 and level-3 products are available starting from September 2002. This paper describes some of the significant improvements in retrieval methodology contained in the Version-6 retrieval algorithm compared to that previously used in Version-5. In particular, the AIRS Science Team made major improvements with regard to the algorithms used to 1) derive surface skin temperature and surface spectral emissivity; 2) generate the initial state used to start the cloud clearing and retrieval procedures; and 3) derive error estimates and use them for Quality Control. Significant improvements have also been made in the generation of cloud parameters. In addition to the basic AIRS/AMSU mode, Version-6 also operates in an AIRS Only (AO) mode which produces results almost as good as those of the full AIRS/AMSU mode. This paper also demonstrates the improvements of some AIRS Version-6 and Version-6 AO products compared to those obtained using Version-5.

LAMPS software

NASA Technical Reports Server (NTRS)

Perkey, D. J.; Kreitzberg, C. W.

1984-01-01

The dynamic prediction model along with its macro-processor capability and data flow system from the Drexel Limited-Area and Mesoscale Prediction System (LAMPS) were converted and recorded for the Perkin-Elmer 3220. The previous version of this model was written for Control Data Corporation 7600 and CRAY-1a computer environment which existed until recently at the National Center for Atmospheric Research. The purpose of this conversion was to prepare LAMPS for porting to computer environments other than that encountered at NCAR. The emphasis was shifted from programming tasks to model simulation and evaluation tests.

Model-based engineering for medical-device software.

PubMed

Ray, Arnab; Jetley, Raoul; Jones, Paul L; Zhang, Yi

2010-01-01

This paper demonstrates the benefits of adopting model-based design techniques for engineering medical device software. By using a patient-controlled analgesic (PCA) infusion pump as a candidate medical device, the authors show how using models to capture design information allows for i) fast and efficient construction of executable device prototypes ii) creation of a standard, reusable baseline software architecture for a particular device family, iii) formal verification of the design against safety requirements, and iv) creation of a safety framework that reduces verification costs for future versions of the device software. 1.

User's Guide for the Commercial Modular Aero-Propulsion System Simulation (C-MAPSS): Version 2

NASA Technical Reports Server (NTRS)

Liu, Yuan; Frederick, Dean K.; DeCastro, Jonathan A.; Litt, Jonathan S.; Chan, William W.

2012-01-01

This report is a Users Guide for version 2 of the NASA-developed Commercial Modular Aero-Propulsion System Simulation (C-MAPSS) software, which is a transient simulation of a large commercial turbofan engine (up to 90,000-lb thrust) with a realistic engine control system. The software supports easy access to health, control, and engine parameters through a graphical user interface (GUI). C-MAPSS v.2 has some enhancements over the original, including three actuators rather than one, the addition of actuator and sensor dynamics, and an improved controller, while retaining or improving on the convenience and user-friendliness of the original. C-MAPSS v.2 provides the user with a graphical turbofan engine simulation environment in which advanced algorithms can be implemented and tested. C-MAPSS can run user-specified transient simulations, and it can generate state-space linear models of the nonlinear engine model at an operating point. The code has a number of GUI screens that allow point-and-click operation, and have editable fields for user-specified input. The software includes an atmospheric model which allows simulation of engine operation at altitudes from sea level to 40,000 ft, Mach numbers from 0 to 0.90, and ambient temperatures from -60 to 103 F. The package also includes a power-management system that allows the engine to be operated over a wide range of thrust levels throughout the full range of flight conditions.

Linearized Poststall Aerodynamic and Control Law Models of the X-31A Aircraft and Comparison with Flight Data

NASA Technical Reports Server (NTRS)

Stoliker, Patrick C.; Bosworth, John T.; Georgie, Jennifer

1997-01-01

The X-31A aircraft has a unique configuration that uses thrust-vector vanes and aerodynamic control effectors to provide an operating envelope to a maximum 70 deg angle of attack, an inherently nonlinear portion of the flight envelope. This report presents linearized versions of the X-31A longitudinal and lateral-directional control systems, with aerodynamic models sufficient to evaluate characteristics in the poststall envelope at 30 deg, 45 deg, and 60 deg angle of attack. The models are presented with detail sufficient to allow the reader to reproduce the linear results or perform independent control studies. Comparisons between the responses of the linear models and flight data are presented in the time and frequency domains to demonstrate the strengths and weaknesses of the ability to predict high-angle-of-attack flight dynamics using linear models. The X-31A six-degree-of-freedom simulation contains a program that calculates linear perturbation models throughout the X-31A flight envelope. The models include aerodynamics and flight control system dynamics that are used for stability, controllability, and handling qualities analysis. The models presented in this report demonstrate the ability to provide reasonable linear representations in the poststall flight regime.

The inherent weaknesses in industrial control systems devices; hacking and defending SCADA systems

NASA Astrophysics Data System (ADS)

Bianco, Louis J.

The North American Electric Reliability Corporation (NERC) is about to enforce their NERC Critical Infrastructure Protection (CIP) Version Five and Six requirements on July 1st 2016. The NERC CIP requirements are a set of cyber security standards designed to protect cyber assets essential the reliable operation of the electric grid. The new Version Five and Six requirements are a major revision to the Version Three (currently enforced) requirements. The new requirements also bring substations into scope alongside Energy Control Centers. When the Version Five requirements were originally drafted they were vague, causing in depth discussions throughout the industry. The ramifications of these requirements has made owners look at their systems in depth, questioning how much money it will take to meet these requirements. Some owners saw backing down from routable networks to non-routable as a means to save money as they would be held to less requirements within the standards. Some owners saw removing routable connections as a proper security move. The purpose of this research was to uncover the inherent weaknesses in Industrial Control Systems (ICS) devices; to show how ICS devices can be hacked and figure out potential protections for these Critical Infrastructure devices. In addition, this research also aimed to validate the decision to move from External Routable connectivity to Non-Routable connectivity, as a security measure and not as a means of savings. The results reveal in order to ultimately protect Industrial Control Systems they must be removed from the Internet and all bi-directional external routable connections must be removed. Furthermore; non-routable serial connections should be utilized, and these non-routable serial connections should be encrypted on different layers of the OSI model. The research concluded that most weaknesses in SCADA systems are due to the inherent weaknesses in ICS devices and because of these weaknesses, human intervention is the biggest threat to SCADA systems.

Evolution of N-species Kimura/voter models towards criticality, a surrogate for general models of accidental pathogens

NASA Astrophysics Data System (ADS)

Ghaffari, Peyman; Stollenwerk, Nico

2012-09-01

In models for accidental pathogens, with the paradigmatic epidemiological system of bacterial meningitis, there was evolution towards states exhibiting critical fluctuations with power law behaviour observed [1]. This is a model with many possibly pathogenic strains essentially evolving independently to low pathogenicity. A first and previous study had shown that in the limit of vanishing pathogenicity there are critical fluctuations with power law distributions observed, already when only two strains interact [2]. This earlier version of a two strain model was very recently reinvestigated [3] and named as Stollenwerk-Jansen model (SJ). Muñoz et al. demonstrated that this two-strain model for accidental pathogens is in the universality class of the so-called voter model. Though this model clearly shows criticality, its control parameter, the pathogenicity, is not self-tuning towards criticality. However, the multi-strain version mentioned above [1] is well evolving towards criticality, as well as a spatially explicit version of this, shown in [4] p. 155. These models of multi-strain type including explicitly mutations of the pathogenicity can be called SJ-models of type II [5]. Since the original epidemiological model is of SIRYX-type, the evolution to zero pathogenicity is slow and perturbed by large population noise. In the present article we now show on the basis of the notion of the voter-model universality classes the evolution of n-voter models with mutaion towards criticality, now much less perturbed by population noise, hence demonstrating a clear mechanism of self-organized criticality in the sense of [6, 7]. The present results have wide implications for many diseases in which a large proportion of infections is asymptomatic, meaning that the system has already evolved towards an average low pathogenicity. This holds not only for the original paradigmatic case of bacterial meningitis, but was reecently also suggested for example for dengue fever (DENFREE project).

Preliminary consideration of CFETR ITER-like case diagnostic system.

PubMed

Li, G S; Yang, Y; Wang, Y M; Ming, T F; Han, X; Liu, S C; Wang, E H; Liu, Y K; Yang, W J; Li, G Q; Hu, Q S; Gao, X

2016-11-01

Chinese Fusion Engineering Test Reactor (CFETR) is a new superconducting tokamak device being designed in China, which aims at bridging the gap between ITER and DEMO, where DEMO is a tokamak demonstration fusion reactor. Two diagnostic cases, ITER-like case and towards DEMO case, have been considered for CFETR early and later operating phases, respectively. In this paper, some preliminary consideration of ITER-like case will be presented. Based on ITER diagnostic system, three versions of increased complexity and coverage of the ITER-like case diagnostic system have been developed with different goals and functions. Version A aims only machine protection and basic control. Both of version B and version C are mainly for machine protection, basic and advanced control, but version C has an increased level of redundancy necessary for improved measurements capability. The performance of these versions and needed R&D work are outlined.

Preliminary consideration of CFETR ITER-like case diagnostic system

DOE Office of Scientific and Technical Information (OSTI.GOV)

Li, G. S.; Liu, Y. K.; Gao, X.

2016-11-15

Chinese Fusion Engineering Test Reactor (CFETR) is a new superconducting tokamak device being designed in China, which aims at bridging the gap between ITER and DEMO, where DEMO is a tokamak demonstration fusion reactor. Two diagnostic cases, ITER-like case and towards DEMO case, have been considered for CFETR early and later operating phases, respectively. In this paper, some preliminary consideration of ITER-like case will be presented. Based on ITER diagnostic system, three versions of increased complexity and coverage of the ITER-like case diagnostic system have been developed with different goals and functions. Version A aims only machine protection and basicmore » control. Both of version B and version C are mainly for machine protection, basic and advanced control, but version C has an increased level of redundancy necessary for improved measurements capability. The performance of these versions and needed R&D work are outlined.« less

Remifentanil versus placebo for analgesia during external cephalic version: a randomised clinical trial.

PubMed

Muñoz, H; Guerra, S; Perez-Vaquero, P; Valero Martinez, C; Aizpuru, F; Lopez-Picado, A

2014-02-01

Breech presentation occurs in up to 3% of pregnancies at term and may be an indication for caesarean delivery. External cephalic version can be effective in repositioning the fetus in a cephalic presentation, but may be painful for the mother. Our aim was to assess the efficacy of remifentanil versus placebo for pain relief during external cephalic version. A randomized, double-blind, controlled trial that included women at 36-41 weeks of gestation with non-cephalic presentations was performed. Women were randomized to receive either a remifentanil infusion at 0.1 μg/kg/min and demand boluses of 0.1 μg/kg, or saline placebo. The primary outcome was the numerical rating pain score (0-10) after external cephalic version. Sixty women were recruited, 29 in the control group and 31 in the remifentanil group. There were significant differences in pain scores at the end of the procedure (control 6.5 ± 2.4 vs. remifentanil 4.7 ± 2.5, P = 0.005) but not 10 min later (P = 0.054). The overall success rate for external cephalic version was 49% with no significant differences between groups (remifentanil group 54.8% vs. control group 41.3%, P = 0.358). In the remifentanil group, there was one case of nausea and vomiting, one of drowsiness and three cases of fetal bradycardia. In the control group, there were three cases of nausea and vomiting, one of dizziness and nine cases of fetal bradycardia. Intravenous remifentanil with bolus doses on demand during external cephalic version achieved a reduction in pain and increased maternal satisfaction. There were no additional adverse effects, and no difference in the success rate of external cephalic version or the incidence of fetal bradycardia. Copyright © 2013 Elsevier Ltd. All rights reserved.

Switch-backs associated with generic drugs approved using product-specific determinations of therapeutic equivalence.

PubMed

Gagne, Joshua J; Polinski, Jennifer M; Jiang, Wenlei; Dutcher, Sarah K; Xie, Jing; Lii, Joyce; Fulchino, Lisa A; Kesselheim, Aaron S

2016-08-01

US Food and Drug Administration approval for generic drugs relies on demonstrating pharmaceutical equivalence and bioequivalence; however, some drug products have unique attributes that necessitate product-specific approval pathways. We evaluated rates of patients' switching back to brand-name versions from generic versions of four drugs approved via such approaches. We used data from Optum LifeSciences Research Database to identify patients using a brand-name version of a study drug (acarbose tablets, salmon calcitonin nasal spray, enoxaparin sodium injection, and venlafaxine extended release tablets) or a control drug. We followed patients to identify switching to generic versions and then followed those who switched to identify whether they switched back to brand-name versions. We calculated switch and switch-back rates and used Kaplan-Meier and log-rank tests to compare rates between study and control drugs. Our cohort included 201 959 eligible patients. Brand-to-generic switch rates ranged from 66 to 106 switches per 100 person-years for study drugs and 80 to 110 for control drugs. Rates of switch-back to brand-name versions ranged from 5 to 37 among study drugs and 3 to 53 among control drugs. Switch-back rates were higher for venlafaxine vs. sertraline (p < 0.01) and calcitonin vs. alendronate (p = 0.01). Switch-back rates were lower for venlafaxine vs. paroxetine (p < 0.01) and acarbose vs. nateglinide (p < 0.01). Rates were similar for acarbose vs. glimepiride (p = 0.97) and for enoxaparin vs. fondiparinux (p = 0.11). As compared to control drugs, patients were not more likely to systematically switch back from generic to brand-name versions of the four study drugs. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

The impact of climatological model biases in the North Atlantic jet on predicted future circulation change

NASA Astrophysics Data System (ADS)

Simpson, I.

2015-12-01

A long standing bias among global climate models (GCMs) is their incorrect representation of the wintertime circulation of the North Atlantic region. Specifically models tend to exhibit a North Atlantic jet (and associated storm track) that is too zonal, extending across central Europe, when it should tilt northward toward Scandinavia. GCM's consistently predict substantial changes in the large scale circulation in this region, consisting of a localized anti-cyclonic circulation, centered over the Mediterranean and accompanied by increased aridity there and increased storminess over Northern Europe.Here, we present preliminary results from experiments that are designed to address the question of what the impact of the climatological circulation biases might be on this predicted future response. Climate change experiments will be compared in two versions of the Community Earth System Model: the first is a free running version of the model, as typically used in climate prediction; the second is a bias corrected version of the model in which a seasonally varying cycle of bias correction tendencies are applied to the wind and temperature fields. These bias correction tendencies are designed to account for deficiencies in the fast parameterized processes, with an aim to push the model toward a more realistic climatology.While these experiments come with the caveat that they assume the bias correction tendencies will remain constant with time, they allow for an initial assessment, through controlled experiments, of the impact that biases in the climatological circulation can have on future predictions in this region. They will also motivate future work that can make use of the bias correction tendencies to understand the underlying physical processes responsible for the incorrect tilt of the jet.

A Modular Framework for Modeling Hardware Elements in Distributed Engine Control Systems

NASA Technical Reports Server (NTRS)

Zinnecker, Alicia M.; Culley, Dennis E.; Aretskin-Hariton, Eliot D.

2014-01-01

Progress toward the implementation of distributed engine control in an aerospace application may be accelerated through the development of a hardware-in-the-loop (HIL) system for testing new control architectures and hardware outside of a physical test cell environment. One component required in an HIL simulation system is a high-fidelity model of the control platform: sensors, actuators, and the control law. The control system developed for the Commercial Modular Aero-Propulsion System Simulation 40k (C-MAPSS40k) provides a verifiable baseline for development of a model for simulating a distributed control architecture. This distributed controller model will contain enhanced hardware models, capturing the dynamics of the transducer and the effects of data processing, and a model of the controller network. A multilevel framework is presented that establishes three sets of interfaces in the control platform: communication with the engine (through sensors and actuators), communication between hardware and controller (over a network), and the physical connections within individual pieces of hardware. This introduces modularity at each level of the model, encouraging collaboration in the development and testing of various control schemes or hardware designs. At the hardware level, this modularity is leveraged through the creation of a Simulink(R) library containing blocks for constructing smart transducer models complying with the IEEE 1451 specification. These hardware models were incorporated in a distributed version of the baseline C-MAPSS40k controller and simulations were run to compare the performance of the two models. The overall tracking ability differed only due to quantization effects in the feedback measurements in the distributed controller. Additionally, it was also found that the added complexity of the smart transducer models did not prevent real-time operation of the distributed controller model, a requirement of an HIL system.

A Modular Framework for Modeling Hardware Elements in Distributed Engine Control Systems

NASA Technical Reports Server (NTRS)

Zinnecker, Alicia M.; Culley, Dennis E.; Aretskin-Hariton, Eliot D.

2015-01-01

Progress toward the implementation of distributed engine control in an aerospace application may be accelerated through the development of a hardware-in-the-loop (HIL) system for testing new control architectures and hardware outside of a physical test cell environment. One component required in an HIL simulation system is a high-fidelity model of the control platform: sensors, actuators, and the control law. The control system developed for the Commercial Modular Aero-Propulsion System Simulation 40k (C-MAPSS40k) provides a verifiable baseline for development of a model for simulating a distributed control architecture. This distributed controller model will contain enhanced hardware models, capturing the dynamics of the transducer and the effects of data processing, and a model of the controller network. A multilevel framework is presented that establishes three sets of interfaces in the control platform: communication with the engine (through sensors and actuators), communication between hardware and controller (over a network), and the physical connections within individual pieces of hardware. This introduces modularity at each level of the model, encouraging collaboration in the development and testing of various control schemes or hardware designs. At the hardware level, this modularity is leveraged through the creation of a SimulinkR library containing blocks for constructing smart transducer models complying with the IEEE 1451 specification. These hardware models were incorporated in a distributed version of the baseline C-MAPSS40k controller and simulations were run to compare the performance of the two models. The overall tracking ability differed only due to quantization effects in the feedback measurements in the distributed controller. Additionally, it was also found that the added complexity of the smart transducer models did not prevent real-time operation of the distributed controller model, a requirement of an HIL system.

A Modular Framework for Modeling Hardware Elements in Distributed Engine Control Systems

NASA Technical Reports Server (NTRS)

Zinnecker, Alicia Mae; Culley, Dennis E.; Aretskin-Hariton, Eliot D.

2014-01-01

Progress toward the implementation of distributed engine control in an aerospace application may be accelerated through the development of a hardware-in-the-loop (HIL) system for testing new control architectures and hardware outside of a physical test cell environment. One component required in an HIL simulation system is a high-fidelity model of the control platform: sensors, actuators, and the control law. The control system developed for the Commercial Modular Aero-Propulsion System Simulation 40k (40,000 pound force thrust) (C-MAPSS40k) provides a verifiable baseline for development of a model for simulating a distributed control architecture. This distributed controller model will contain enhanced hardware models, capturing the dynamics of the transducer and the effects of data processing, and a model of the controller network. A multilevel framework is presented that establishes three sets of interfaces in the control platform: communication with the engine (through sensors and actuators), communication between hardware and controller (over a network), and the physical connections within individual pieces of hardware. This introduces modularity at each level of the model, encouraging collaboration in the development and testing of various control schemes or hardware designs. At the hardware level, this modularity is leveraged through the creation of a Simulink (R) library containing blocks for constructing smart transducer models complying with the IEEE 1451 specification. These hardware models were incorporated in a distributed version of the baseline C-MAPSS40k controller and simulations were run to compare the performance of the two models. The overall tracking ability differed only due to quantization effects in the feedback measurements in the distributed controller. Additionally, it was also found that the added complexity of the smart transducer models did not prevent real-time operation of the distributed controller model, a requirement of an HIL system.

Simulating the 2012 High Plains drought using three single column versions (SCM) of BUGS5

NASA Astrophysics Data System (ADS)

Medina, I. D.; Denning, S.

2013-12-01

The impact of changes in the frequency and severity of drought on fresh water sustainability is a great concern for many regions of the world. One such location is the High Plains, where the local economy is primarily driven by fresh water withdrawals from the Ogallala Aquifer, which accounts for approximately 30% of total irrigation withdrawals from all U.S. aquifers combined. Modeling studies that focus on the feedback mechanisms that control the climate and eco-hydrology during times of drought are limited, and have used conventional General Circulation Models (GCMs) with grid length scales ranging from one hundred to several hundred kilometers. Additionally, these models utilize crude statistical parameterizations of cloud processes for estimating sub-grid fluxes of heat and moisture and have a poor representation of land surface heterogeneity. For this research, we will focus on the 2012 High Plains drought and will perform numerical simulations using three single column versions (SCM) of BUGS5 (Colorado State University (CSU) GCM coupled to the Simple Biosphere Model (SiB3)) at multiple sites overlying the Ogallala Aquifer for the 2011-2012 periods. In the first version of BUGS5, the model will be used in its standard bulk setting (single atmospheric column coupled to a single instance of SiB3), secondly, the Super-Parameterized Community Atmospheric Model (SP-CAM), a cloud resolving model (CRM consists of 64 atmospheric columns), will replace the single CSU GCM atmospheric parameterization and will be coupled to a single instance of SiB3, and for the third version of BUGS5, an instance of SiB3 will be coupled to each CRM column of the SP-CAM (64 CRM columns coupled to 64 instances of SiB3). To assess the physical realism of the land-atmosphere feedbacks simulated at each site by all versions of BUGS5, differences in simulated energy and moisture fluxes will be computed between the 2011 and 2012 period and will be compared to differences calculated using observational data from the AmeriFlux tower network for the same period. These results will give some insight to the land-atmosphere feedbacks GCMs may produce when atmospheric and land surface heterogeneity are included within a single framework. Furthermore, this research will provide a better understanding of model deficiencies in reproducing and predicting droughts in the future, which is essential to the economic, ecologic and social well being of the High Plains.

Prediction of the Length of Upcoming Solar Cycles

NASA Astrophysics Data System (ADS)

Kakad, Bharati; Kakad, Amar; Ramesh, Durbha Sai

2017-12-01

The forecast of solar cycle (SC) characteristics is crucial particularly for several space-based missions. In the present study, we propose a new model for predicting the length of the SC. The model uses the information of the width of an autocorrelation function that is derived from the daily sunspot data for each SC. We tested the model on Versions 1 and 2 of the daily international sunspot number data for SCs 10 - 24. We found that the autocorrelation width Aw n of SC n during the second half of its ascending phase correlates well with the modified length that is defined as T_{cy}^{n+2} - Tan. Here T_{cy}^{n+2} and T_{ a}n are the length and ascent time of SCs n+2 and n, respectively. The estimated correlation coefficient between the model parameters is 0.93 (0.91) for Version 1 (Version 2) sunspot series. The standard errors in the observed and predicted lengths of the SCs for Version 1 and Version 2 data are 0.38 and 0.44 years, respectively. The advantage of the proposed model is that the predictions of the length of the upcoming two SCs ( i.e., n+1, n+2) are readily available at the time of the peak of SC n. The present model gives a forecast of 11.01, 10.52, and 11.91 years (11.01, 12.20, and 11.68 years) for the length of SCs 24, 25, and 26, respectively, for Version 1 (Version 2).

Spatio-energetic cross-talk in photon counting detectors: Numerical detector model (PcTK) and workflow for CT image quality assessment.

PubMed

Taguchi, Katsuyuki; Stierstorfer, Karl; Polster, Christoph; Lee, Okkyun; Kappler, Steffen

2018-05-01

The interpixel cross-talk of energy-sensitive photon counting x-ray detectors (PCDs) has been studied and an analytical model (version 2.1) has been developed for double-counting between neighboring pixels due to charge sharing and K-shell fluorescence x-ray emission followed by its reabsorption (Taguchi K, et al., Medical Physics 2016;43(12):6386-6404). While the model version 2.1 simulated the spectral degradation well, it had the following problems that has been found to be significant recently: (1) The spectrum is inaccurate with smaller pixel sizes; (2) the charge cloud size must be smaller than the pixel size; (3) the model underestimates the spectrum/counts for 10-40 keV; and (4) the model version 2.1 cannot handlen-tuple-counting withn > 2 (i.e., triple-counting or higher). These problems are inherent to the design of the model version 2.1; therefore, we developed a new model and addressed these problems in this study. We propose a new PCD cross-talk model (version 3.2; Pc TK for "photon counting toolkit") that is based on a completely different design concept from the previous version. It uses a numerical approach and starts with a 2-D model of charge sharing (as opposed to an analytical approach and a 1-D model with version 2.1) and addresses all of the four problems. The model takes the following factors into account: (1) shift-variant electron density of the charge cloud (Gaussian-distributed), (2) detection efficiency, (3) interactions between photons and PCDs via photoelectric effect, and (4) electronic noise. Correlated noisy PCD data can be generated using either a multivariate normal random number generator or a Poisson random number generator. The effect of the two parameters, the effective charge cloud diameter (d 0 ) and pixel size (d pix ), was studied and results were compared with Monte Carlo simulations and the previous model version 2.1. Finally, a script for the workflow for CT image quality assessment has been developed, which started with a few material density images, generated material-specific sinogram (line integrals) data, noisy PCD data with spectral distortion using the model version 3.2, and reconstructed PCD- CT images for four energy windows. The model version 3.2 addressed all of the four problems listed above. The spectra withd pix  = 56-113 μm agreed with that of Medipix3 detector withd pix  = 55-110 μm without charge summing mode qualitatively. The counts for 10-40 keV were larger than the previous model (version 2.1) and agreed with MC simulations very well (root-mean-square difference values with model version 3.2 were decreased to 16%-67% of the values with version 2.1). There were many non-zero off-diagonal elements withn-tuple-counting withn > 2 in the normalized covariance matrix of 3 × 3 neighboring pixels. Reconstructed images showed biases and artifacts attributed to the spectral distortion due to the charge sharing and fluorescence x rays. We have developed a new PCD model for spatio-energetic cross-talk and correlation between PCD pixels. The workflow demonstrated the utility of the model for general or task-specific image quality assessments for the PCD- CT.Note: The program (Pc TK) and the workflow scripts have been made available to academic researchers. Interested readers should visit the website (pctk.jhu.edu) or contact the corresponding author. © 2018 American Association of Physicists in Medicine.

TSARINA: A Computer Model for Assessing Conventional and Chemical Attacks on Airbases

DTIC Science & Technology

1990-09-01

IV, and has been updated to FORTRAN 77; it has been adapted to various computer systems, as was the widely used AIDA model and the previous versions of...conventional and chemical attacks on sortie generation. In the first version of TSARINA [1 2], several key additions were made to the AIDA model so that (1...various on-base resources, in addition to the estimates of hits and facility damage that are generated by the original AIDA model . The second version

21 CFR 290.6 - Spanish-language version of required warning.

Code of Federal Regulations, 2010 CFR

2010-04-01

... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Spanish-language version of required warning. 290... (CONTINUED) DRUGS: GENERAL CONTROLLED DRUGS General Provisions § 290.6 Spanish-language version of required... of this drug to any person other than the patient for whom it was prescribed.” The Spanish version of...

Technical report series on global modeling and data assimilation. Volume 4: Documentation of the Goddard Earth Observing System (GEOS) data assimilation system, version 1

NASA Technical Reports Server (NTRS)

Suarez, Max J. (Editor); Pfaendtner, James; Bloom, Stephen; Lamich, David; Seablom, Michael; Sienkiewicz, Meta; Stobie, James; Dasilva, Arlindo

1995-01-01

This report describes the analysis component of the Goddard Earth Observing System, Data Assimilation System, Version 1 (GEOS-1 DAS). The general features of the data assimilation system are outlined, followed by a thorough description of the statistical interpolation algorithm, including specification of error covariances and quality control of observations. We conclude with a discussion of the current status of development of the GEOS data assimilation system. The main components of GEOS-1 DAS are an atmospheric general circulation model and an Optimal Interpolation algorithm. The system is cycled using the Incremental Analysis Update (IAU) technique in which analysis increments are introduced as time independent forcing terms in a forecast model integration. The system is capable of producing dynamically balanced states without the explicit use of initialization, as well as a time-continuous representation of non- observables such as precipitation and radiational fluxes. This version of the data assimilation system was used in the five-year reanalysis project completed in April 1994 by Goddard's Data Assimilation Office (DAO) Data from this reanalysis are available from the Goddard Distributed Active Center (DAAC), which is part of NASA's Earth Observing System Data and Information System (EOSDIS). For information on how to obtain these data sets, contact the Goddard DAAC at (301) 286-3209, EMAIL daac@gsfc.nasa.gov.

Version pressure feedback mechanisms for speculative versioning caches

DOEpatents

Eichenberger, Alexandre E.; Gara, Alan; O& #x27; Brien, Kathryn M.; Ohmacht, Martin; Zhuang, Xiaotong

2013-03-12

Mechanisms are provided for controlling version pressure on a speculative versioning cache. Raw version pressure data is collected based on one or more threads accessing cache lines of the speculative versioning cache. One or more statistical measures of version pressure are generated based on the collected raw version pressure data. A determination is made as to whether one or more modifications to an operation of a data processing system are to be performed based on the one or more statistical measures of version pressure, the one or more modifications affecting version pressure exerted on the speculative versioning cache. An operation of the data processing system is modified based on the one or more determined modifications, in response to a determination that one or more modifications to the operation of the data processing system are to be performed, to affect the version pressure exerted on the speculative versioning cache.

A framework for expanding aqueous chemistry in the Community Multiscale Air Quality (CMAQ) model version 5.1

EPA Science Inventory

This paper describes the development and implementation of an extendable aqueous-phase chemistry option (AQCHEM − KMT(I)) for the Community Multiscale Air Quality (CMAQ) modeling system, version 5.1. Here, the Kinetic PreProcessor (KPP), version 2.2.3, is used t...

The factor structure and psychometric properties of the Spanish version of the Mayer-Salovey-Caruso Emotional Intelligence Test.

PubMed

Sanchez-Garcia, Manuel; Extremera, Natalio; Fernandez-Berrocal, Pablo

2016-11-01

This research examined evidence regarding the reliability and validity of scores on the Spanish version of the Mayer-Salovey-Caruso Emotional Intelligence Test, Version 2.0 (MSCEIT; Mayer, Salovey, & Caruso, 2002). In Study 1, we found a close convergence of the Spanish consensus scores and the general and expert consensus scores determined with Mayer, Salovey, Caruso, and Sitarenios (2003) data. The MSCEIT also demonstrated adequate evidence of reliability of test scores as estimated by internal consistency and test-retest correlation after 12 weeks. Confirmatory factor analysis supported a 3-level higher factor model with 8 manifest variables (task scores), 4 first-level factors (corresponding to the 4-branch model of Mayer & Salovey [1997], with 2 tasks for each branch), 2 second-level factors (experiential and strategic areas, with 2 branches for each area), and 1 third-level factor (overall emotional intelligence [EI]), and multigroup analyses supported MSCEIT cross-gender invariance. Study 2 found evidence for the discriminant validity of scores on the MSCEIT subscales, which were differentially related to personality and self-reported EI. Study 3 provided evidence of the incremental validity of scores on the MSCEIT, which added significant variance to the prospective prediction of psychological well-being after controlling for personality traits. The psychometric properties of the Spanish MSCEIT are similar to those of the original English version, supporting its use for assessing emotional abilities in the Spanish population. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Parallel computation for biological sequence comparison: comparing a portable model to the native model for the Intel Hypercube.

PubMed Central

Nadkarni, P. M.; Miller, P. L.

1991-01-01

A parallel program for inter-database sequence comparison was developed on the Intel Hypercube using two models of parallel programming. One version was built using machine-specific Hypercube parallel programming commands. The other version was built using Linda, a machine-independent parallel programming language. The two versions of the program provide a case study comparing these two approaches to parallelization in an important biological application area. Benchmark tests with both programs gave comparable results with a small number of processors. As the number of processors was increased, the Linda version was somewhat less efficient. The Linda version was also run without change on Network Linda, a virtual parallel machine running on a network of desktop workstations. PMID:1807632

Time Reparametrization Group and the Long Time Behavior in Quantum Glassy Systems

NASA Astrophysics Data System (ADS)

Kennett, Malcolm P.; Chamon, Claudio

2001-02-01

We study the long time dynamics of a quantum version of the Sherrington-Kirkpatrick model. Time reparametrizations of the dynamical equations have a parallel with renormalization group transformations; in this language the long time behavior of this model is controlled by a reparametrization group ( RpG) fixed point of the classical dynamics. The irrelevance of quantum terms in the dynamical equations in the aging regime explains the classical nature of the out of equilibrium fluctuation-dissipation relation.

Validation of an Italian version of the Food Craving Questionnaire-State: Factor structure and sensitivity to manipulation.

PubMed

Lombardo, Caterina; Iani, Luca; Barbaranelli, Claudio

2016-08-01

The present paper describes two studies designed to evaluate the construct and the predictive validity of an Italian version of the Food Craving Questionnaire-State (FCQ-S). In the first study 368 volunteers aged 18-65years completed the FCQ-S and the Disordered Eating Questionnaire (DEQ). In the second study 41 females with eating disorders symptoms (mean age: 24.4yrs., DEQ≥30; Body Mass Index (BMI) in the range 17 to 30.9kg/m(2), 87.5% in the normal range) and 43 female healthy controls (mean age: 25.6yrs., DEQ<30; BMI in the normal range) took part in an experiment aimed at assessing changes in FCQ-S after exposure to words or images of highly palatable foods. The results of Study 1 showed that the five-factor model had acceptable fit indices. All subscales of the FCQ-S (but Desire) significantly correlated with the disordered eating measure. The strongest relationship was found between disordered eating and fear of losing control over food intake. The results of Study 2 revealed that four out of five FCQ-S subscales significantly increased after exposure to food stimuli. Participants with eating disorders symptoms, as compared to controls, also showed higher fear of losing control over food and higher negative reinforcement, although this difference was only marginally significant. The Italian version of the FCQ-S has good construct and concurrent validity, and it seems sensitive in detecting changes induced by stimuli related to highly palatable foods. Copyright © 2016 Elsevier Ltd. All rights reserved.

Practical robustness measures in multivariable control system analysis. Ph.D. Thesis

NASA Technical Reports Server (NTRS)

Lehtomaki, N. A.

1981-01-01

The robustness of the stability of multivariable linear time invariant feedback control systems with respect to model uncertainty is considered using frequency domain criteria. Available robustness tests are unified under a common framework based on the nature and structure of model errors. These results are derived using a multivariable version of Nyquist's stability theorem in which the minimum singular value of the return difference transfer matrix is shown to be the multivariable generalization of the distance to the critical point on a single input, single output Nyquist diagram. Using the return difference transfer matrix, a very general robustness theorem is presented from which all of the robustness tests dealing with specific model errors may be derived. The robustness tests that explicitly utilized model error structure are able to guarantee feedback system stability in the face of model errors of larger magnitude than those robustness tests that do not. The robustness of linear quadratic Gaussian control systems are analyzed.

An equilibrium-point model of electromyographic patterns during single-joint movements based on experimentally reconstructed control signals.

PubMed

Latash, M L; Goodman, S R

1994-01-01

The purpose of this work has been to develop a model of electromyographic (EMG) patterns during single-joint movements based on a version of the equilibrium-point hypothesis, a method for experimental reconstruction of the joint compliant characteristics, the dual-strategy hypothesis, and a kinematic model of movement trajectory. EMG patterns are considered emergent properties of hypothetical control patterns that are equally affected by the control signals and peripheral feedback reflecting actual movement trajectory. A computer model generated the EMG patterns based on simulated movement kinematics and hypothetical control signals derived from the reconstructed joint compliant characteristics. The model predictions have been compared to published recordings of movement kinematics and EMG patterns in a variety of movement conditions, including movements over different distances, at different speeds, against different-known inertial loads, and in conditions of possible unexpected decrease in the inertial load. Changes in task parameters within the model led to simulated EMG patterns qualitatively similar to the experimentally recorded EMG patterns. The model's predictive power compares it favourably to the existing models of the EMG patterns. Copyright © 1994. Published by Elsevier Ltd.

Asymmetrical booster ascent guidance and control system design study. Volume 1: Summary. [space shuttle development

NASA Technical Reports Server (NTRS)

Williams, F. E.; Lemon, R. S.; Jaggers, R. F.; Wilson, J. L.

1974-01-01

Dynamics and control, stability, and guidance analyses are summarized for the asymmetrical booster ascent guidance and control system design studies, performed in conjunction with space shuttle planning. The mathematical models developed for use in rigid body and flexible body versions of the NASA JSC space shuttle functional simulator are briefly discussed, along with information on the following: (1) space shuttle stability analysis using equations of motion for both pitch and lateral axes; (2) the computer program used to obtain stability margin; and (3) the guidance equations developed for the space shuttle powered flight phases.

A Test Reliability Analysis of an Abbreviated Version of the Pupil Control Ideology Form.

ERIC Educational Resources Information Center

Gaffney, Patrick V.

A reliability analysis was conducted of an abbreviated, 10-item version of the Pupil Control Ideology Form (PCI), using the Cronbach's alpha technique (L. J. Cronbach, 1951) and the computation of the standard error of measurement. The PCI measures a teacher's orientation toward pupil control. Subjects were 168 preservice teachers from one private…

A detailed analysis of the erythropoietic control system in the human, squirrel, monkey, rat and mouse

NASA Technical Reports Server (NTRS)

Nordheim, A. W.

1985-01-01

The erythropoiesis modeling performed in support of the Body Fluid and Blood Volume Regulation tasks is described. The mathematical formulation of the species independent model, the solutions to the steady state and dynamic versions of the model, and the individual species specific models for the human, squirrel monkey, rat and mouse are outlined. A detailed sensitivity analysis of the species independent model response to parameter changes and how those responses change from species to species is presented. The species to species response to a series of simulated stresses directly related to blood volume regulation during space flight is analyzed.

Future climate change under RCP emission scenarios with GISS ModelE2

DOE PAGES

Nazarenko, L.; Schmidt, G. A.; Miller, R. L.; ...

2015-02-24

We examine the anthropogenically forced climate response for the 21st century representative concentration pathway (RCP) emission scenarios and their extensions for the period 2101–2500. The experiments were performed with ModelE2, a new version of the NASA Goddard Institute for Space Sciences (GISS) coupled general circulation model that includes three different versions for the atmospheric composition components: a noninteractive version (NINT) with prescribed composition and a tuned aerosol indirect effect (AIE), the TCAD version with fully interactive aerosols, whole-atmosphere chemistry, and the tuned AIE, and the TCADI version which further includes a parameterized first indirect aerosol effect on clouds. Each atmosphericmore » version is coupled to two different ocean general circulation models: the Russell ocean model (GISS-E2-R) and HYCOM (GISS-E2-H). By 2100, global mean warming in the RCP scenarios ranges from 1.0 to 4.5° C relative to 1850–1860 mean temperature in the historical simulations. In the RCP2.6 scenario, the surface warming in all simulations stays below a 2 °C threshold at the end of the 21st century. For RCP8.5, the range is 3.5–4.5° C at 2100. Decadally averaged sea ice area changes are highly correlated to global mean surface air temperature anomalies and show steep declines in both hemispheres, with a larger sensitivity during winter months. By the year 2500, there are complete recoveries of the globally averaged surface air temperature for all versions of the GISS climate model in the low-forcing scenario RCP2.6. TCADI simulations show enhanced warming due to greater sensitivity to CO₂, aerosol effects, and greater methane feedbacks, and recovery is much slower in RCP2.6 than with the NINT and TCAD versions. All coupled models have decreases in the Atlantic overturning stream function by 2100. In RCP2.6, there is a complete recovery of the Atlantic overturning stream function by the year 2500 while with scenario RCP8.5, the E2-R climate model produces a complete shutdown of deep water formation in the North Atlantic.« less

Accounting for observation uncertainties in an evaluation metric of low latitude turbulent air-sea fluxes: application to the comparison of a suite of IPSL model versions

NASA Astrophysics Data System (ADS)

Servonnat, Jérôme; Găinuşă-Bogdan, Alina; Braconnot, Pascale

2017-09-01

Turbulent momentum and heat (sensible heat and latent heat) fluxes at the air-sea interface are key components of the whole energetic of the Earth's climate. The evaluation of these fluxes in the climate models is still difficult because of the large uncertainties associated with the reference products. In this paper we present an objective metric accounting for reference uncertainties to evaluate the annual cycle of the low latitude turbulent fluxes of a suite of IPSL climate models. This metric consists in a Hotelling T 2 test between the simulated and observed field in a reduce space characterized by the dominant modes of variability that are common to both the model and the reference, taking into account the observational uncertainty. The test is thus more severe when uncertainties are small as it is the case for sea surface temperature (SST). The results of the test show that for almost all variables and all model versions the model-reference differences are not zero. It is not possible to distinguish between model versions for sensible heat and meridional wind stress, certainly due to the large observational uncertainties. All model versions share similar biases for the different variables. There is no improvement between the reference versions of the IPSL model used for CMIP3 and CMIP5. The test also reveals that the higher horizontal resolution fails to improve the representation of the turbulent surface fluxes compared to the other versions. The representation of the fluxes is further degraded in a version with improved atmospheric physics with an amplification of some of the biases in the Indian Ocean and in the intertropical convergence zone. The ranking of the model versions for the turbulent fluxes is not correlated with the ranking found for SST. This highlights that despite the fact that SST gradients are important for the large-scale atmospheric circulation patterns, other factors such as wind speed, and air-sea temperature contrast play an important role in the representation of turbulent fluxes.

Benchmark Dose Software (BMDS) Development and ...

EPA Pesticide Factsheets

This report is intended to provide an overview of beta version 1.0 of the implementation of a model of repeated measures data referred to as the Toxicodiffusion model. The implementation described here represents the first steps towards integration of the Toxicodiffusion model into the EPA benchmark dose software (BMDS). This version runs from within BMDS 2.0 using an option screen for making model selection, as is done for other models in the BMDS 2.0 suite. This report is intended to provide an overview of beta version 1.0 of the implementation of a model of repeated measures data referred to as the Toxicodiffusion model.

Synthesis study of Texas signal control systems : technical report.

DOT National Transportation Integrated Search

2012-09-01

In recent years, several versions of traffic control systems have been established across the United States and within the state of Texas. There is a growing need to identify the various versions of these systems that exist, including the system hard...

Web Services Integration on the Fly

DTIC Science & Technology

2008-12-01

NETBEANS 6.1 AND VERSION CONTROL............................................28 1. NetBeans Integrated Development Environment (IDE) ................28 2...Forward and Reverse Engineering...................................................28 3. Implementation using NetBeans ...29 4. Subversion (SVN) for Version Control in NetBeans ......................29 O. PROTÉGÉ AUTHORING TOOL FOR SEMANTIC WEB

Development of an integrated aeroservoelastic analysis program and correlation with test data

NASA Technical Reports Server (NTRS)

Gupta, K. K.; Brenner, M. J.; Voelker, L. S.

1991-01-01

The details and results are presented of the general-purpose finite element STructural Analysis RoutineS (STARS) to perform a complete linear aeroelastic and aeroservoelastic analysis. The earlier version of the STARS computer program enabled effective finite element modeling as well as static, vibration, buckling, and dynamic response of damped and undamped systems, including those with pre-stressed and spinning structures. Additions to the STARS program include aeroelastic modeling for flutter and divergence solutions, and hybrid control system augmentation for aeroservoelastic analysis. Numerical results of the X-29A aircraft pertaining to vibration, flutter-divergence, and open- and closed-loop aeroservoelastic controls analysis are compared to ground vibration, wind-tunnel, and flight-test results. The open- and closed-loop aeroservoelastic control analyses are based on a hybrid formulation representing the interaction of structural, aerodynamic, and flight-control dynamics.

Relationship between attributional style, perceived control, self-esteem, and depressive mood in a nonclinical sample: a structural equation-modelling approach.

PubMed

Ledrich, Julie; Gana, Kamel

2013-12-01

The aim of this study was to examine the intricate relationship between some personality traits (i.e., attributional style, perceived control over consequences, self-esteem), and depressive mood in a nonclinical sample (N= 334). Method. Structural equation modelling was used to estimate five competing models: two vulnerability models describing the effects of personality traits on depressive mood, one scar model describing the effects of depression on personality traits, a mixed model describing the effects of attributional style and perceived control over consequences on depressive mood, which in turn affects self-esteem, and a reciprocal model which is a non-recursive version of the mixed model that specifies bidirectional effects between depressive mood and self-esteem. The best-fitting model was the mixed model. Moreover, we observed a significant negative effect of depression on self-esteem, but no effect in the opposite direction. These findings provide supporting arguments against the continuum model of the relationship between self-esteem and depression, and lend substantial support to the scar model, which claims that depressive mood damages and erodes self-esteem. In addition, the 'depressogenic' nature of the pessimistic attributional style, and the 'antidepressant' nature of perceived control over consequences plead in favour of the vulnerability model. © 2012 The British Psychological Society.

Testing CMAQ chemistry sensitivities in base case and emissions control runs at SEARCH and SOS99 surface sites in the southeastern US

NASA Astrophysics Data System (ADS)

Arnold, J. R.; Dennis, Robin L.

CMAQ was run to simulate urban and regional tropospheric conditions in the southeastern US over 14 days in July 1999 at 32, 8 and 2 km grid spacings. Runs were made with either of two older mechanisms, Carbon Bond IV (CB4) and the Regional Acid Deposition Model, version 2 (RADM2), and with the more recent and complete California Statewide Air Pollution Research Center, version 1999 mechanism (SAPRC99) in a sensitivity matrix with a full emissions base case and separate 50% control scenarios for emissions of nitrogen oxides (NO X) and volatile organic compounds (VOC). Results from the base case were compared to observations at the Southeastern Aerosol Research and Characterization Study (SEARCH) site at Jefferson Street in Atlanta, GA (JST) and the Southern Oxidant Study (SOS) Cornelia Fort Airpark (CFA) site downwind of Nashville, TN. In the base case, SAPRC99 predicted more ozone (O 3) than CB4 or RADM2 almost every hour and especially for afternoon maxima at both JST and CFA. Performance of the 8 km models at JST was better than that of the 32 km ones for all chemistries, reducing the 1 h peak bias by as much as 30 percentage points; at CFA only the RADM2 8 km model improved. The 2 km solutions did not show improved performance over the 8 km ones at either site, with normalized 1 h bias in the peak O 3 ranging from 21% at CFA to 43% at JST. In the emissions control cases, SAPRC99 was generally more responsive than CB4 and RADM2 to NO X and VOC controls, excepting hours at JST with predicted increased O 3 from NO X control. Differential sensitivity to chemical mechanism varied by more than ±10% for NO X control at JST and CFA, and in a similar range for VOC control at JST. VOC control at the more strongly NO X- limited urban CFA site produced a differential sensitivity response of <5%. However, even when differential sensitivities in control cases were small, neither their sign nor their magnitude could be reliably determined from model performance in the full emissions case, meaning that the degree of O 3 response to a change in chemical mechanism can differ substantially with the level of precursor emissions. Hence we conclude that properly understanding the effects of changes in a model's chemical mechanism always requires emissions control cases as part of model sensitivity analysis.

The role of "evidence" in recovery from mental illness.

PubMed

Tanenbaum, Sandra J

2006-12-01

Evidence-based practice (EBP), a derivative of evidence-based medicine (EBM), is ascendant in the United States' mental health system; the findings of randomized controlled trials and other experimental research are widely considered authoritative in mental health practice and policy. The concept of recovery from mental illness is similarly pervasive in mental health programming and advocacy, and it emphasizes consumer expertise and self-determination. What is the relationship between these two powerful and potentially incompatible forces for mental health reform? This paper identifies four attempts, in the mental health literature, to delineate the role of "evidence" in recovery. One is the strong version of evidence-based practice-an applied science model-and three others address weaknesses in the first by limiting the authority of probabilistic findings. The paper also offers a fifth version, based on the concept of communicative accountability, which is derived from Habermas' work on communicative action. The fifth version responds to the other four and emphasizes learning, disclosure and respect in clinical and other helping relationships.

Development of the Spanish version of the Systematized Nomenclature of Medicine: methodology and main issues.

PubMed Central

Reynoso, G. A.; March, A. D.; Berra, C. M.; Strobietto, R. P.; Barani, M.; Iubatti, M.; Chiaradio, M. P.; Serebrisky, D.; Kahn, A.; Vaccarezza, O. A.; Leguiza, J. L.; Ceitlin, M.; Luna, D. A.; Bernaldo de Quirós, F. G.; Otegui, M. I.; Puga, M. C.; Vallejos, M.

2000-01-01

This presentation features linguistic and terminology management issues related to the development of the Spanish version of the Systematized Nomenclature of Medicine (SNOMED). It aims at describing the aspects of translating and the difficulties encountered in delivering a natural and consistent medical nomenclature. Bunge's three-layered model is referenced to analyze the sequence of symbolic concept representations. It further explains how a communicative translation based on a concept-to-concept approach was used to achieve the highest level of flawlessness and naturalness for the Spanish rendition of SNOMED. Translation procedures and techniques are described and exemplified. Both the computer-aided and human translation methods are portrayed. The scientific and translation team tasks are detailed, with focus on Newmark's four-level principle for the translation process, extended with a fifth further level relevant to the ontology to control the consistency of the typology of concepts. Finally the convenience for a common methodology to develop non-English versions of SNOMED is suggested. PMID:11079973

A framework for expanding aqueous chemistry in the Community Multiscale Air Quality (CMAQ) model version 5.1

EPA Science Inventory

This paper describes the development and implementation of an extendable aqueous-phase chemistry option (AQCHEM − KMT(I)) for the Community Multiscale Air Quality (CMAQ) modeling system, version 5.1. Here, the Kinetic PreProcessor (KPP), version 2.2.3, is used to generate a Rosen...

Examination of the validity and reliability of the French version of the Brief Self-Control Scale

PubMed Central

Brevers, Damien; Foucart, Jennifer; Verbanck, Paul; Turel, Ofir

2017-01-01

This study aims to develop and to validate a French version of the Brief Self-Control Scale (BSCS; Tangney et al., 2004). This instrument is usually applied as a unidimensional self-report measure for assessing trait self-control, which captures one’s dispositional ability to resist short-term temptation in order to reach more valuable long-term goals. Data were collected from two independent samples of French-speaking individuals (n1 = 287; n2 = 160). Results indicated that the French version of the BSCS can be treated as unidimensional, like the original questionnaire. Data also showed consistent acceptable reliability and reasonable test-retest stability. Acceptable external validity of constructs was supported by relationships with self-reported measures of impulsivity (UPPS), including urgency, lack of premeditation, and lack of perseverance. Overall, the findings suggest that the average score of the French version of the BSCS is a viable option for assessing trait self-control in French speaking populations. PMID:29200467

Examination of the validity and reliability of the French version of the Brief Self-Control Scale.

PubMed

Brevers, Damien; Foucart, Jennifer; Verbanck, Paul; Turel, Ofir

2017-10-01

This study aims to develop and to validate a French version of the Brief Self-Control Scale (BSCS; Tangney et al., 2004). This instrument is usually applied as a unidimensional self-report measure for assessing trait self-control, which captures one's dispositional ability to resist short-term temptation in order to reach more valuable long-term goals. Data were collected from two independent samples of French-speaking individuals ( n 1 = 287; n 2 = 160). Results indicated that the French version of the BSCS can be treated as unidimensional, like the original questionnaire. Data also showed consistent acceptable reliability and reasonable test-retest stability. Acceptable external validity of constructs was supported by relationships with self-reported measures of impulsivity (UPPS), including urgency, lack of premeditation, and lack of perseverance. Overall, the findings suggest that the average score of the French version of the BSCS is a viable option for assessing trait self-control in French speaking populations.

Permutational distribution of the log-rank statistic under random censorship with applications to carcinogenicity assays.

PubMed

Heimann, G; Neuhaus, G

1998-03-01

In the random censorship model, the log-rank test is often used for comparing a control group with different dose groups. If the number of tumors is small, so-called exact methods are often applied for computing critical values from a permutational distribution. Two of these exact methods are discussed and shown to be incorrect. The correct permutational distribution is derived and studied with respect to its behavior under unequal censoring in the light of recent results proving that the permutational version and the unconditional version of the log-rank test are asymptotically equivalent even under unequal censoring. The log-rank test is studied by simulations of a realistic scenario from a bioassay with small numbers of tumors.

GeoSciML v3.0 - a significant upgrade of the CGI-IUGS geoscience data model

NASA Astrophysics Data System (ADS)

Raymond, O.; Duclaux, G.; Boisvert, E.; Cipolloni, C.; Cox, S.; Laxton, J.; Letourneau, F.; Richard, S.; Ritchie, A.; Sen, M.; Serrano, J.-J.; Simons, B.; Vuollo, J.

2012-04-01

GeoSciML version 3.0 (http://www.geosciml.org), released in late 2011, is the latest version of the CGI-IUGS* Interoperability Working Group geoscience data interchange standard. The new version is a significant upgrade and refactoring of GeoSciML v2 which was released in 2008. GeoSciML v3 has already been adopted by several major international interoperability initiatives, including OneGeology, the EU INSPIRE program, and the US Geoscience Information Network, as their standard data exchange format for geoscience data. GeoSciML v3 makes use of recently upgraded versions of several Open Geospatial Consortium (OGC) and ISO data transfer standards, including GML v3.2, SWE Common v2.0, and Observations and Measurements v2 (ISO 19156). The GeoSciML v3 data model has been refactored from a single large application schema with many packages, into a number of smaller, but related, application schema modules with individual namespaces. This refactoring allows the use and future development of modules of GeoSciML (eg; GeologicUnit, GeologicStructure, GeologicAge, Borehole) in smaller, more manageable units. As a result of this refactoring and the integration with new OGC and ISO standards, GeoSciML v3 is not backwardly compatible with previous GeoSciML versions. The scope of GeoSciML has been extended in version 3.0 to include new models for geomorphological data (a Geomorphology application schema), and for geological specimens, geochronological interpretations, and metadata for geochemical and geochronological analyses (a LaboratoryAnalysis-Specimen application schema). In addition, there is better support for borehole data, and the PhysicalProperties model now supports a wider range of petrophysical measurements. The previously used CGI_Value data type has been superseded in favour of externally governed data types provided by OGC's SWE Common v2 and GML v3.2 data standards. The GeoSciML v3 release includes worked examples of best practice in delivering geochemical analytical data using the Observations and Measurements (ISO19156) and SWE Common v2 models. The GeoSciML v3 data model does not include vocabularies to support the data model. However, it does provide a standard pattern to reference controlled vocabulary concepts using HTTP-URIs. The international GeoSciML community has developed distributed RDF-based geoscience vocabularies that can be accessed by GeoSciML web services using the standard pattern recommended in GeoSciML v3. GeoSciML v3 is the first version of GeoSciML that will be accompanied by web service validation tools using Schematron rules. For example, these validation tools may check for compliance of a web service to a particular profile of GeoSciML, or for logical consistency of data content that cannot be enforced by the application schemas. This validation process will support accreditation of GeoSciML services and a higher degree of semantic interoperability. * International Union of Geological Sciences Commission for Management and Application of Geoscience Information (CGI-IUGS)

Neuraxial blockade for external cephalic version: a systematic review.

PubMed

Sultan, P; Carvalho, B

2011-10-01

The desire to decrease the number of cesarean deliveries has renewed interest in external cephalic version. The rationale for using neuraxial blockade to facilitate external cephalic version is to provide abdominal muscular relaxation and reduce patient discomfort during the procedure, so permitting successful repositioning of the fetus to a cephalic presentation. This review systematically examined the current evidence to determine the safety and efficacy of neuraxial anesthesia or analgesia when used for external cephalic version. A systematic literature review of studies that examined success rates of external cephalic version with neuraxial anesthesia was performed. Published articles written in English between 1945 and 2010 were identified using the Medline, Cochrane, EMBASE and Web of Sciences databases. Six, randomized controlled studies were identified. Neuraxial blockade significantly improved the success rate in four of these six studies. A further six non-randomized studies were identified, of which four studies with control groups found that neuraxial blockade increased the success rate of external cephalic version. Despite over 850 patients being included in the 12 studies reviewed, placental abruption was reported in only one patient with a neuraxial block, compared with two in the control groups. The incidence of non-reassuring fetal heart rate requiring cesarean delivery in the anesthesia groups was 0.44% (95% CI 0.15-1.32). Neuraxial blockade improved the likelihood of success during external cephalic version, although the dosing regimen that provides optimal conditions for successful version is unclear. Anesthetic rather than analgesic doses of local anesthetics may improve success. The findings suggest that neuraxial blockade does not compromise maternal or fetal safety during external cephalic version. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

Comprehension of confidence intervals - development and piloting of patient information materials for people with multiple sclerosis: qualitative study and pilot randomised controlled trial.

PubMed

Rahn, Anne C; Backhus, Imke; Fuest, Franz; Riemann-Lorenz, Karin; Köpke, Sascha; van de Roemer, Adrianus; Mühlhauser, Ingrid; Heesen, Christoph

2016-09-20

Presentation of confidence intervals alongside information about treatment effects can support informed treatment choices in people with multiple sclerosis. We aimed to develop and pilot-test different written patient information materials explaining confidence intervals in people with relapsing-remitting multiple sclerosis. Further, a questionnaire on comprehension of confidence intervals was developed and piloted. We developed different patient information versions aiming to explain confidence intervals. We used an illustrative example to test three different approaches: (1) short version, (2) "average weight" version and (3) "worm prophylaxis" version. Interviews were conducted using think-aloud and teach-back approaches to test feasibility and analysed using qualitative content analysis. To assess comprehension of confidence intervals, a six-item multiple choice questionnaire was developed and tested in a pilot randomised controlled trial using the online survey software UNIPARK. Here, the average weight version (intervention group) was tested against a standard patient information version on confidence intervals (control group). People with multiple sclerosis were invited to take part using existing mailing-lists of people with multiple sclerosis in Germany and were randomised using the UNIPARK algorithm. Participants were blinded towards group allocation. Primary endpoint was comprehension of confidence intervals, assessed with the six-item multiple choice questionnaire with six points representing perfect knowledge. Feasibility of the patient information versions was tested with 16 people with multiple sclerosis. For the pilot randomised controlled trial, 64 people with multiple sclerosis were randomised (intervention group: n = 36; control group: n = 28). More questions were answered correctly in the intervention group compared to the control group (mean 4.8 vs 3.8, mean difference 1.1 (95 % CI 0.42-1.69), p = 0.002). The questionnaire's internal consistency was moderate (Cronbach's alpha = 0.56). The pilot-phase shows promising results concerning acceptability and feasibility. Pilot randomised controlled trial results indicate that the patient information is well understood and that knowledge gain on confidence intervals can be assessed with a set of six questions. German Clinical Trials Register: DRKS00008561 . Registered 8th of June 2015.

Version 4.0 of code Java for 3D simulation of the CCA model

NASA Astrophysics Data System (ADS)

Fan, Linyu; Liao, Jianwei; Zuo, Junsen; Zhang, Kebo; Li, Chao; Xiong, Hailing

2018-07-01

This paper presents a new version Java code for the three-dimensional simulation of Cluster-Cluster Aggregation (CCA) model to replace the previous version. Many redundant traverses of clusters-list in the program were totally avoided, so that the consumed simulation time is significantly reduced. In order to show the aggregation process in a more intuitive way, we have labeled different clusters with varied colors. Besides, a new function is added for outputting the particle's coordinates of aggregates in file to benefit coupling our model with other models.

Self-consistency in the phonon space of the particle-phonon coupling model

NASA Astrophysics Data System (ADS)

Tselyaev, V.; Lyutorovich, N.; Speth, J.; Reinhard, P.-G.

2018-04-01

In the paper the nonlinear generalization of the time blocking approximation (TBA) is presented. The TBA is one of the versions of the extended random-phase approximation (RPA) developed within the Green-function method and the particle-phonon coupling model. In the generalized version of the TBA the self-consistency principle is extended onto the phonon space of the model. The numerical examples show that this nonlinear version of the TBA leads to the convergence of results with respect to enlarging the phonon space of the model.

Farsi version of the multidimensional health locus of control and God locus of health control scales: validity and reliability study among Iranian women with a family history of breast cancer.

PubMed

Hashemian, Masoumeh; Aminshokravi, Farkhonde; Hidarnia, Alireza; Lamyian, Minoor; Hassanpour, Kazem; Akaberi, Arash; Moshki, Mahdi

2014-09-01

To determine the Persian version's reliability and validity of the Multidimensional Health Locus of Control and God Health Locus of Control scales among women with family history of breast cancer. The cross-sectional study was conducted in Sabzevar, Iran, in 2012. It randomly selected women with family members affected by breast cancer. Predesigned questionnaires were completed through interviews. Content and face validity was evaluated using the opinions of a panel of experts, and construct validity was confirmed by applying confirmatory factor analysis.The instruments' reliability was assessed using Cronbach's alpha and test-retest reliability. There were 200 women in the study with their age ranging between 18 and 69 years and revealed the following; root mean square error of approximation for Multidimensional Health Locus of Control Scale = 0.013, and God Locus of Health Control Scale = 0.077; comparative fit index = 0.999, 0.998; incremental fit index = 0.999, 0.998;Tucker-Lewis fit index = 0.998, 0.998; and normed fit index = 0.983, 0.997 respectively. Cronbach's alpha was 0.61 for Internal Health Locus of Control, 0.8 for Chance Health Locus of Control, 0.68 for Power Health Locus of Control and 0.9 for God Locus Health Control. The Persian version of the subscales supported the main version.

Real-time simulation model of the HL-20 lifting body

NASA Technical Reports Server (NTRS)

Jackson, E. Bruce; Cruz, Christopher I.; Ragsdale, W. A.

1992-01-01

A proposed manned spacecraft design, designated the HL-20, has been under investigation at Langley Research Center. Included in that investigation are flight control design and flying qualities studies utilizing a man-in-the-loop real-time simulator. This report documents the current real-time simulation model of the HL-20 lifting body vehicle, known as version 2.0, presently in use at NASA Langley Research Center. Included are data on vehicle aerodynamics, inertias, geometries, guidance and control laws, and cockpit displays and controllers. In addition, trim case and dynamic check case data is provided. The intent of this document is to provide the reader with sufficient information to develop and validate an equivalent simulation of the HL-20 for use in real-time or analytical studies.

Large deviation analysis of a simple information engine

NASA Astrophysics Data System (ADS)

Maitland, Michael; Grosskinsky, Stefan; Harris, Rosemary J.

2015-11-01

Information thermodynamics provides a framework for studying the effect of feedback loops on entropy production. It has enabled the understanding of novel thermodynamic systems such as the information engine, which can be seen as a modern version of "Maxwell's Dæmon," whereby a feedback controller processes information gained by measurements in order to extract work. Here, we analyze a simple model of such an engine that uses feedback control based on measurements to obtain negative entropy production. We focus on the distribution and fluctuations of the information obtained by the feedback controller. Significantly, our model allows an analytic treatment for a two-state system with exact calculation of the large deviation rate function. These results suggest an approximate technique for larger systems, which is corroborated by simulation data.

Thought control strategies in adolescents: links with OCD symptoms and meta-cognitive beliefs.

PubMed

Wilson, Charlotte; Hall, Martin

2012-07-01

The perceived control of intrusive thoughts is important in our understanding of a variety of psychological disorders, but particularly in Obsessive Compulsive Disorder (OCD). Little research has explored thought control strategies in younger populations, despite the frequent onset of OCD in childhood. This study examined thought control strategies and meta-cognitive beliefs in relation to Obsessive Compulsive (OC) interference scores in an adolescent sample. A non-referred sample of 151 adolescents aged 13-16 completed the Thought Control Questionnaire, the Meta-Cognitions Questionnaire - Adolescent version, and the Leyton Obsessional Inventory - Child Version. Adolescents reported using distraction and worry as thought control strategies as much as adults, but social control and reappraisal less frequently, with adolescent males also reporting less use of punishment as a strategy. The strategies of worry and punishment, and positive beliefs about worry, uncontrollability and danger beliefs (UCD) and superstition punishment and responsibility beliefs (SPR) predicted OC interference scores. Furthermore, these meta-cognitive beliefs mediated the relationships between punishment and worry and OC interference scores. Given the similarities between our results and those from research exploring these variables in adults, it is proposed that cognitive behavioural models of OCD that have been developed in adult populations may be relevant to adolescents, but that meta-cognitive beliefs about superstition, punishment and responsibility may be important in adolescence.

A Hybrid Demand Response Simulator Version 1.0

DOE Office of Scientific and Technical Information (OSTI.GOV)

2012-05-02

A hybrid demand response simulator is developed to test different control algorithms for centralized and distributed demand response (DR) programs in a small distribution power grid. The HDRS is designed to model a wide variety of DR services such as peak having, load shifting, arbitrage, spinning reserves, load following, regulation, emergency load shedding, etc. The HDRS does not model the dynamic behaviors of the loads, rather, it simulates the load scheduling and dispatch process. The load models include TCAs (water heaters, air conditioners, refrigerators, freezers, etc) and non-TCAs (lighting, washer, dishwasher, etc.) The ambient temperature changes, thermal resistance, capacitance, andmore » the unit control logics can be modeled for TCA loads. The use patterns of the non-TCA can be modeled by probability of use and probabilistic durations. Some of the communication network characteristics, such as delays and errors, can also be modeled. Most importantly, because the simulator is modular and greatly simplified the thermal models for TCA loads, it is very easy and fast to be used to test and validate different control algorithms in a simulated environment.« less

A psychometric evaluation of the four-item version of the Control Attitudes Scale for patients with cardiac disease and their partners.

PubMed

Årestedt, Kristofer; Ågren, Susanna; Flemme, Inger; Moser, Debra K; Strömberg, Anna

2015-08-01

The four-item Control Attitudes Scale (CAS) was developed to measure control perceived by patients with cardiac disease and their family members, but extensive psychometric evaluation has not been performed. The aim was to translate, culturally adapt and psychometrically evaluate the CAS in a Swedish sample of implantable cardioverter defibrillator (ICD) recipients, heart failure (HF) patients and their partners. A sample (n=391) of ICD recipients, HF patients and partners were used. Descriptive statistics, item-total and inter-item correlations, exploratory factor analysis, ordinal regression modelling and Cronbach's alpha were used to validate the CAS. The findings from the factor analyses revealed that the CAS is a multidimensional scale including two factors, Control and Helplessness. The internal consistency was satisfactory for all scales (α=0.74-0.85), except the family version total scale (α=0.62). No differential item functioning was detected which implies that the CAS can be used to make invariant comparisons between groups of different age and sex. The psychometric properties, together with the simple and short format of the CAS, make it to a useful tool for measuring perceived control among patients with cardiac diseases and their family members. When using the CAS, subscale scores should be preferred. © The European Society of Cardiology 2014.

ImSET: Impact of Sector Energy Technologies

DOE Office of Scientific and Technical Information (OSTI.GOV)

Roop, Joseph M.; Scott, Michael J.; Schultz, Robert W.

2005-07-19

This version of the Impact of Sector Energy Technologies (ImSET) model represents the ''next generation'' of the previously developed Visual Basic model (ImBUILD 2.0) that was developed in 2003 to estimate the macroeconomic impacts of energy-efficient technology in buildings. More specifically, a special-purpose version of the 1997 benchmark national Input-Output (I-O) model was designed specifically to estimate the national employment and income effects of the deployment of Office of Energy Efficiency and Renewable Energy (EERE) -developed energy-saving technologies. In comparison with the previous versions of the model, this version allows for more complete and automated analysis of the essential featuresmore » of energy efficiency investments in buildings, industry, transportation, and the electric power sectors. This version also incorporates improvements in the treatment of operations and maintenance costs, and improves the treatment of financing of investment options. ImSET is also easier to use than extant macroeconomic simulation models and incorporates information developed by each of the EERE offices as part of the requirements of the Government Performance and Results Act.« less

USERS MANUAL: LANDFILL GAS EMISSIONS MODEL - VERSION 2.0

EPA Science Inventory

The document is a user's guide for a computer model, Version 2.0 of the Landfill Gas Emissions Model (LandGEM), for estimating air pollution emissions from municipal solid waste (MSW) landfills. The model can be used to estimate emission rates for methane, carbon dioxide, nonmet...

Modeling sound due to over-snow vehicles in Yellowstone and Grand Teton National Parks

DOT National Transportation Integrated Search

2006-10-01

A modified version of the FAAs Integrated Noise Model (INM) Version 6.2 was used to : model the sound of over-snow vehicles (OSVs) (snowmobiles and snowcoaches) in : Yellowstone and Grand Teton National Parks for ten modeling scenarios provided by...

Nuclear Engine System Simulation (NESS). Version 2.0: Program user's guide

NASA Technical Reports Server (NTRS)

Pelaccio, Dennis G.; Scheil, Christine M.; Petrosky, Lyman

1993-01-01

This Program User's Guide discusses the Nuclear Thermal Propulsion (NTP) engine system design features and capabilities modeled in the Nuclear Engine System Simulation (NESS): Version 2.0 program (referred to as NESS throughout the remainder of this document), as well as its operation. NESS was upgraded to include many new modeling capabilities not available in the original version delivered to NASA LeRC in Dec. 1991, NESS's new features include the following: (1) an improved input format; (2) an advanced solid-core NERVA-type reactor system model (ENABLER 2); (3) a bleed-cycle engine system option; (4) an axial-turbopump design option; (5) an automated pump-out turbopump assembly sizing option; (6) an off-design gas generator engine cycle design option; (7) updated hydrogen properties; (8) an improved output format; and (9) personal computer operation capability. Sample design cases are presented in the user's guide that demonstrate many of the new features associated with this upgraded version of NESS, as well as design modeling features associated with the original version of NESS.

Dual control and prevention of the turn-off phenomenon in a class of mimo systems

NASA Technical Reports Server (NTRS)

Mookerjee, P.; Bar-Shalom, Y.; Molusis, J. A.

1985-01-01

A recently developed methodology of adaptive dual control based upon sensitivity functions is applied here to a multivariable input-output model. The plant has constant but unknown parameters. It represents a simplified linear version of the relationship between the vibration output and the higher harmonic control input for a helicopter. The cautious and the new dual controller are examined. In many instances, the cautious controller is seen to turn off. The new dual controller modifies the cautious control design by numerator and denominator correction terms which depend upon the sensitivity functions of the expected future cost and avoids the turn-off and burst phenomena. Monte Carlo simulations and statistical tests of significance indicate the superiority of the dual controller over the cautious and the heuristic certainity equivalence controllers.

Perceived parental rearing style in childhood: internal structure and concurrent validity on the Egna Minnen Beträffande Uppfostran--Child Version in clinical settings.

PubMed

Penelo, Eva; Viladrich, Carme; Domènech, Josep M

2010-01-01

We provide the first validation data of the Spanish version of the Egna Minnen Beträffande Uppfostran--Child Version (EMBU-C) in a clinical context. The EMBU-C is a 41-item self-report questionnaire that assesses perceived parental rearing style in children, comprising 4 subscales (rejection, emotional warmth, control attempts/overprotection, and favoring subjects). The test was administered to a clinical sample of 174 Spanish psychiatric outpatients aged 8 to 12. Confirmatory factor analyses were performed, analyzing the children's reports about their parents' rearing style. The results were almost equivalent for father's and mother's ratings. Confirmatory factor analysis yielded an acceptable fit to data of the 3-factor model when removing the items of the favoring subjects scale (root mean squared error of approximation <0.07). Satisfactory internal consistency reliability was obtained for 2 of the 3 scales, rejection and emotional warmth (Cronbach alpha >.73), whereas control attempts scale showed lower values, as in previous studies. The influence of sex (of children and parents) on scale scores was inappreciable and children tended to perceive their parents as progressively less warm as they grew older. As predicted, the scores for rejection and emotional warmth were related to bad relationships with parents, absence of family support, harsh discipline, and lack of parental supervision. The Spanish version of EMBU-C can be used with psychometric guarantees to identify rearing style in psychiatric outpatients because evidences of quality in this setting match those obtained in community samples. Copyright 2010 Elsevier Inc. All rights reserved.

Second generation experiments in fault tolerant software

NASA Technical Reports Server (NTRS)

Knight, J. C.

1987-01-01

The purpose of the Multi-Version Software (MVS) experiment is to obtain empirical measurements of the performance of multi-version systems. Twenty version of a program were prepared under reasonably realistic development conditions from the same specifications. The overall structure of the testing environment for the MVS experiment and its status are described. A preliminary version of the control system is described that was implemented for the MVS experiment to allow the experimenter to have control over the details of the testing. The results of an empirical study of error detection using self checks are also presented. The analysis of the checks revealed that there are great differences in the ability of individual programmers to design effective checks.

75 FR 80397 - Version One Regional Reliability Standards for Facilities Design, Connections, and Maintenance...

Federal Register 2010, 2011, 2012, 2013, 2014

2010-12-22

...] Version One Regional Reliability Standards for Facilities Design, Connections, and Maintenance; Protection and Control; and Voltage and Reactive December 17, 2010. AGENCY: Federal Energy Regulatory Commission..., voltage and current sensing devices, station batteries and DC control circuitry). By contrast, the...

A nonsingular model of the open magnetosphere

NASA Technical Reports Server (NTRS)

Toffoletto, F. R.; Hill, T. W.

1993-01-01

We present a modified version of the Toffoletto and Hill (1989) open magnetosphere model that incorporates a tail-like interconection field with a discontinuity 10 represent the slow-mode expansion fan that defines the high-latitude tail magnetopause. (The interconnection field is defined as the perturbation on an initially closed magnetosphere model to make it open.) The expansion fan controls the open field line region in the tail, and the intersection of the fan with the tail current sheet is, by design, the x line. The new interconnection field allows greater control of the tail field structure; in particular, it enables us to eliminate the nightside mapping singularity that occurs in previous models when the interplanetary magnetic field is nonsouthward. Also, in contrast to earlier models, the far tail x line extends farther downstream on the flanks than in the center of the tail, consistent with observations.

SARAH 3.2: Dirac gauginos, UFO output, and more

NASA Astrophysics Data System (ADS)

Staub, Florian

2013-07-01

SARAH is a Mathematica package optimized for the fast, efficient and precise study of supersymmetric models beyond the MSSM: a new model can be defined in a short form and all vertices are derived. This allows SARAH to create model files for FeynArts/FormCalc, CalcHep/CompHep and WHIZARD/O'Mega. The newest version of SARAH now provides the possibility to create model files in the UFO format which is supported by MadGraph 5, MadAnalysis 5, GoSam, and soon by Herwig++. Furthermore, SARAH also calculates the mass matrices, RGEs and 1-loop corrections to the mass spectrum. This information is used to write source code for SPheno in order to create a precision spectrum generator for the given model. This spectrum-generator-generator functionality as well as the output of WHIZARD and CalcHep model files has seen further improvement in this version. Also models including Dirac gauginos are supported with the new version of SARAH, and additional checks for the consistency of the implementation of new models have been created. Program summaryProgram title:SARAH Catalogue identifier: AEIB_v2_0 Program summary URL:http://cpc.cs.qub.ac.uk/summaries/AEIB_v2_0.html Program obtainable from: CPC Program Library, Queen's University, Belfast, N. Ireland Licensing provisions: Standard CPC licence, http://cpc.cs.qub.ac.uk/licence/licence.html No. of lines in distributed program, including test data, etc.: 3 22 411 No. of bytes in distributed program, including test data, etc.: 3 629 206 Distribution format: tar.gz Programming language: Mathematica. Computer: All for which Mathematica is available. Operating system: All for which Mathematica is available. Classification: 11.1, 11.6. Catalogue identifier of previous version: AEIB_v1_0 Journal reference of previous version: Comput. Phys. Comm. 182 (2011) 808 Does the new version supersede the previous version?: Yes, the new version includes all known features of the previous version but also provides the new features mentioned below. Nature of problem: To use Madgraph for new models it is necessary to provide the corresponding model files which include all information about the interactions of the model. However, the derivation of the vertices for a given model and putting those into model files which can be used with Madgraph is usually very time consuming. Dirac gauginos are not present in the minimal supersymmetric standard model (MSSM) or many extensions of it. Dirac mass terms for vector superfields lead to new structures in the supersymmetric (SUSY) Lagrangian (bilinear mass term between gaugino and matter fermion as well as new D-terms) and modify also the SUSY renormalization group equations (RGEs). The Dirac character of gauginos can change the collider phenomenology. In addition, they come with an extended Higgs sector for which a precise calculation of the 1-loop masses has not happened so far. Solution method: SARAH calculates the complete Lagrangian for a given model whose gauge sector can be any direct product of SU(N) gauge groups. The chiral superfields can transform as any, irreducible representation with respect to these gauge groups and it is possible to handle an arbitrary number of symmetry breakings or particle rotations. Also the gauge fixing is automatically added. Using this information, SARAH derives all vertices for a model. These vertices can be exported to model files in the UFO which is supported by Madgraph and other codes like GoSam, MadAnalysis or ALOHA. The user can also study models with Dirac gauginos. In that case SARAH includes all possible terms in the Lagrangian stemming from the new structures and can also calculate the RGEs. The entire impact of these terms is then taken into account in the output of SARAH to UFO, CalcHep, WHIZARD, FeynArts and SPheno. Reasons for new version: SARAH provides, with this version, the possibility of creating model files in the UFO format. The UFO format is supposed to become a standard format for model files which should be supported by many different tools in the future. Also models with Dirac gauginos were not supported in earlier versions. Summary of revisions: Support of models with Dirac gauginos. Output of model files in the UFO format, speed improvement in the output of WHIZARD model files, CalcHep output supports the internal diagonalization of mass matrices, output of control files for LHPC spectrum plotter, support of generalized PDG numbering scheme PDG.IX, improvement of the calculation of the decay widths and branching ratios with SPheno, the calculation of new low energy observables are added to the SPheno output, the handling of gauge fixing terms has been significantly simplified. Restrictions: SARAH can only derive the Lagrangian in an automatized way for N=1 SUSY models, but not for those with more SUSY generators. Furthermore, SARAH supports only renormalizable operators in the output of model files in the UFO format and also for CalcHep, FeynArts and WHIZARD. Also color sextets are not yet included in the model files for Monte Carlo tools. Dimension 5 operators are only supported in the calculation of the RGEs and mass matrices. Unusual features: SARAH does not need the Lagrangian of a model as input to calculate the vertices. The gauge structure, particle and content and superpotential as well as rotations stemming from gauge symmetry breaking are sufficient. All further information is derived by SARAH on its own. Therefore, the model files are very short and the implementation of new models is fast and easy. In addition, the implementation of a model can be checked for physical and formal consistency. In addition, SARAH can generate Fortran code for a full 1-loop analysis of the mass spectrum in the context for Dirac gauginos. Running time: Measured CPU time for the evaluation of the MSSM using a Lenovo Thinkpad X220 with i7 processor (2.53 GHz). Calculating the complete Lagrangian: 9 s. Calculating all vertices: 51 s. Output of the UFO model files: 49 s.

A NEW COMBINED LOCAL AND NON-LOCAL PBL MODEL FOR METEOROLOGY AND AIR QUALITY MODELING

EPA Science Inventory

A new version of the Asymmetric Convective Model (ACM) has been developed to describe sub-grid vertical turbulent transport in both meteorology models and air quality models. The new version (ACM2) combines the non-local convective mixing of the original ACM with local eddy diff...

The drug resistance strategies intervention: program effects on substance use.

PubMed

Hecht, Michael L; Graham, John W; Elek, Elvira

2006-01-01

This study evaluates the Drug Resistance Strategies (DRS) project, a culturally grounded, communication-based substance use prevention program implemented in 35 middle schools in Phoenix, Arizona. The intervention consisted of 10 lessons taught by the classroom teacher that imparted the knowledge, motivation, and skills needed to resist drug offers. The evaluation used growth modeling to analyze significant differences in average postintervention substance use (alcohol, cigarettes, and marijuana) and growth of use over the course of the study. The study involved 6,298 seventh graders (65% Mexican/Mexican American) who responded to at least 1 of 4 questionnaires (1 pretest and 3 follow-up measures). When compared to a control group, the DRS intervention appeared to significantly limit the increase in the number of students reporting recent substance use, especially alcohol and marijuana use. The multicultural version of the curriculum proved most broadly effective, followed by the version targeting Mexican American youth. The development of a culturally grounded prevention curriculum for Mexican American youth expands the population being served by interventions. Moreover, the success of the multicultural curriculum version, which has the broadest application, provides particular promise, and the article demonstrates how a growth modeling approach can be used to evaluate a communication-based intervention by analyzing changes over time rather than differences between the pretest and posttest scores.

TESTING CMAQ CHEMISTRY SENSITIVITIES IN BASE CHASE AND EMISSION CONTROL RUNS AT SEARCH AND SOS 99 SURFACE SITES IN THE SOUTHEASTERN UNITED STATES

EPA Science Inventory

CMAQ was run to simulate urban conditions in the southeastern U.S. in July 1999 at 32, 8, and 2 km grid spacings. Runs were made with two older mechanisms, Carbon Bond IV (CB4) and the Regional Acid Deposition Model, version 2 (RADM2), and with the more recent California Statewid...

Psychoticism and disruptive behavior can be also good predictors of school achievement.

PubMed

Flores-Mendoza, Carmen; Widaman, Keith; Mansur-Alves, Marcela; Bacelar, Tatiane Dias; Saldanha, Renata

2013-01-01

The relations of Gf (Standard Progressive Matrices Raven), Gc (verbal scale of Wechsler Intelligence Scale for Children-Third Version), personality dimensions (Eysenck Personality Questionnaire-Junior Version), and disruptive behavior (TDAH scale) with school achievement (measured by TDE test and PISA test) were investigated. Two samples of students (total N = 534) representing a broad range of socioeconomic status (SES) participated in this study. Path models were conducted. The results demonstrated that (1) in both samples no sex differences related to school achievement were found; (2) in the first sample, after controlling for age and SES differences, Gf and psychoticism predicted (.38 and -.13, respectively) school achievement (measured by TDE test); (3) in the second sample, after controlling for SES differences to which additional measures were administered, Gf and Gc positively predicted (.22 and .40, respectively) school achievement (measured by PISA test). In addition, psychoticism and disruptive behavior also predicted school performance (-.14 and -.28, respectively). Some theoretical and practical implications are discussed.

Mars Digital Image Model 2.1 Control Network

NASA Technical Reports Server (NTRS)

Archinal, B. A.; Kirk, R. L.; Duxbury, T. C.; Lee, E. M.; Sucharski, R.; Cook, D.

2003-01-01

USGS is currently preparing a new version of its global Mars digital image mosaic, which will be known as MDIM 2.1. As part of this process we are completing a new photogrammetric solution of the global Mars control network. This is an improved version of the network established earlier by RAND and USGS personnel, as partially described previously. MDIM 2.1 will have many improvements over earlier Viking Orbiter (VO) global mosaics. Geometrically, it will be an orthoimage product, draped on Mars Orbiter Laser Altimeter (MOLA) derived topography, thus accounting properly for the commonly oblique VO imagery. Through the network being described here it will be tied to the newly defined IAU/IAG 2000 Mars coordinate system via ties to MOLA data. Thus, MDIM 2.1 will provide complete global orthorectified imagery coverage of Mars at the resolution of 1/256 deg of MDIM 2.0, and be compatible with MOLA and other products produced in the current coordinate system.

A SELF-CONSISTENT DEUTSCHIAN ESP MODEL

EPA Science Inventory

The report presents a new version of the EPA I Southern Research Institute electrostatic precipitator (ESP) model. The primary difference between this and the standard (Revision 3) versions is in the treatment of the particulate space charge. Both models apply the Deutsch equatio...

SARAH 4: A tool for (not only SUSY) model builders

NASA Astrophysics Data System (ADS)

Staub, Florian

2014-06-01

We present the new version of the Mathematica package SARAH which provides the same features for a non-supersymmetric model as previous versions for supersymmetric models. This includes an easy and straightforward definition of the model, the calculation of all vertices, mass matrices, tadpole equations, and self-energies. Also the two-loop renormalization group equations for a general gauge theory are now included and have been validated with the independent Python code PyR@TE. Model files for FeynArts, CalcHep/CompHep, WHIZARD and in the UFO format can be written, and source code for SPheno for the calculation of the mass spectrum, a set of precision observables, and the decay widths and branching ratios of all states can be generated. Furthermore, the new version includes routines to output model files for Vevacious for both, supersymmetric and non-supersymmetric, models. Global symmetries are also supported with this version and by linking Susyno the handling of Lie groups has been improved and extended.

Dynamic analysis of Space Shuttle/RMS configuration using continuum approach

NASA Technical Reports Server (NTRS)

Ramakrishnan, Jayant; Taylor, Lawrence W., Jr.

1994-01-01

The initial assembly of Space Station Freedom involves the Space Shuttle, its Remote Manipulation System (RMS) and the evolving Space Station Freedom. The dynamics of this coupled system involves both the structural and the control system dynamics of each of these components. The modeling and analysis of such an assembly is made even more formidable by kinematic and joint nonlinearities. The current practice of modeling such flexible structures is to use finite element modeling in which the mass and interior dynamics is ignored between thousands of nodes, for each major component. The model characteristics of only tens of modes are kept out of thousands which are calculated. The components are then connected by approximating the boundary conditions and inserting the control system dynamics. In this paper continuum models are used instead of finite element models because of the improved accuracy, reduced number of model parameters, the avoidance of model order reduction, and the ability to represent the structural and control system dynamics in the same system of equations. Dynamic analysis of linear versions of the model is performed and compared with finite element model results. Additionally, the transfer matrix to continuum modeling is presented.

Description and evaluation of the Community Multiscale Air Quality (CMAQ) modeling system version 5.1

EPA Science Inventory

The Community Multiscale Air Quality (CMAQ) model is a comprehensive multipollutant air quality modeling system developed and maintained by the US Environmental Protection Agency's (EPA) Office of Research and Development (ORD). Recently, version 5.1 of the CMAQ model (v5.1) was ...

Psychometric Properties of the Persian Version of the God Locus of Health Control (GLHC): A Study on Muslim Pilgrims.

PubMed

Nabipour, Amir Reza; Nakhaee, Nouzar; Khanjani, Narges; Soltani, Maryam; Moradlou, Hossein Zirak; Soltani, Zahrasadat

2018-02-01

God Locus of Health Control (GHLC) scale is an instrument for assessing to what extent one believes that God controls his/her health or disease. The aim of this study was to describe the cultural adaptation of this scale and to investigate the psychometric properties of Persian version. At first, the scale was forward-translated to Persian, and then, backward-translation was conducted. Finally, the synthesized back-translated version was prepared and compared to the draft Persian-language version of the GLHC. In the next step, in order to test cognitive debriefing, the Persian-language version of the questionnaire was completed by 20 pilgrims. Final version of Persian GHLC scale was answered by 600 pilgrims attending religious holy places. Mean age of respondents was 33.15 (±11.04) years. There was a positive correlation between six items of GLHC scale and inter-item correlation coefficients. The Cronbach's alpha coefficient was 0.84. Exploratory factor analysis showed that the G LHC scale had a one-factor structure. The factor loadings for all items ranged from 0.57 to 0.77. Residual correlations of all items were between -0.2 and +0.2. The people with lower income had significantly higher score of GLHC scale. GLHC scale score had a significant positive correlation with DUREL subscale and MHLC Chance Externality subscale score. There was no a significant correlation between GLHC scale score and Multidimensional Health Locus of Control (MHLC) Internality and Powerful subscales scores. The results of the present study showed that the Persian version of GHLC scale has acceptable factorial validity and internal consistency reliability.

Indication-Based Ordering: A New Paradigm for Glycemic Control in Hospitalized Inpatients

PubMed Central

Lee, Joshua; Clay, Brian; Zelazny, Ziband; Maynard, Gregory

2008-01-01

Background Inpatient glycemic control is a constant challenge. Institutional insulin management protocols and structured order sets are commonly advocated but poorly studied. Effective and validated methods to integrate algorithmic protocol guidance into the insulin ordering process are needed. Methods We introduced a basic structured set of computerized insulin orders (Version 1), and later introduced a paper insulin management protocol, to assist users with the order set. Metrics were devised to assess the impact of the protocol on insulin use, glycemic control, and hypoglycemia using pharmacy data and point of care glucose tests. When incremental improvement was seen (as described in the results), Version 2 of the insulin orders was created to further streamline the process. Results The percentage of regimens containing basal insulin improved with Version 1. The percentage of patient days with hypoglycemia improved from 3.68% at baseline to 2.59% with Version 1 plus the paper insulin management protocol, representing a relative risk for hypoglycemic day of 0.70 [confidence interval (CI) 0.62, 0.80]. The relative risk of an uncontrolled (mean glucose over 180 mg/dl) patient stay was reduced to 0.84 (CI 0.77, 0.91) with Version 1 and was reduced further to 0.73 (CI 0.66, 0.81) with the paper protocol. Version 2 used clinician-entered patient parameters to guide protocol-based insulin ordering and simultaneously improved the flexibility and ease of ordering over Version 1. Conclusion Patient parameter and protocol-based clinical decision support, added to computerized provider order entry, has a track record of improving glycemic control indices. This justifies the incorporation of these algorithms into online order management. PMID:19885198

User’s Guide for COMBIMAN Programs (COMputerized BIomechanical MAN-Model). Version 4.

DTIC Science & Technology

1981-01-01

103 2.2.23 STATE SWITCH Function (PFK29) 105 2.2.24 RESTART PROGRAM Function (PFK30) 110 2.2.25 END PROGRAM Function (PFK31) il 2.3 EXECUTING THE JOB...108 40 Transformation Equation Developed for Positioning Stomach Link (Set State Switch 72 ON) 109 41 JOB CONTROL CARDS to Execute CBM04. 114 42...154 50b Program CBMAM Survey Member Dimension Definition Cards. 154 51 Example of Survey, or Type 1, Member. 155 52 Job Control Cards to Execute CBMAM

Reconfigurable Flight Control Using Nonlinear Dynamic Inversion with a Special Accelerometer Implementation

NASA Technical Reports Server (NTRS)

Bacon, Barton J.; Ostroff, Aaron J.

2000-01-01

This paper presents an approach to on-line control design for aircraft that have suffered either actuator failure, missing effector surfaces, surface damage, or any combination. The approach is based on a modified version of nonlinear dynamic inversion. The approach does not require a model of the baseline vehicle (effectors at zero deflection), but does require feedback of accelerations and effector positions. Implementation issues are addressed and the method is demonstrated on an advanced tailless aircraft. An experimental simulation analysis tool is used to directly evaluate the nonlinear system's stability robustness.

A rule-based approach to model checking of UML state machines

NASA Astrophysics Data System (ADS)

Grobelna, Iwona; Grobelny, Michał; Stefanowicz, Łukasz

2016-12-01

In the paper a new approach to formal verification of control process specification expressed by means of UML state machines in version 2.x is proposed. In contrast to other approaches from the literature, we use the abstract and universal rule-based logical model suitable both for model checking (using the nuXmv model checker), but also for logical synthesis in form of rapid prototyping. Hence, a prototype implementation in hardware description language VHDL can be obtained that fully reflects the primary, already formally verified specification in form of UML state machines. Presented approach allows to increase the assurance that implemented system meets the user-defined requirements.

Langley's CSI evolutionary model: Phase O

NASA Technical Reports Server (NTRS)

Belvin, W. Keith; Elliott, Kenny B.; Horta, Lucas G.; Bailey, Jim P.; Bruner, Anne M.; Sulla, Jeffrey L.; Won, John; Ugoletti, Roberto M.

1991-01-01

A testbed for the development of Controls Structures Interaction (CSI) technology to improve space science platform pointing is described. The evolutionary nature of the testbed will permit the study of global line-of-sight pointing in phases 0 and 1, whereas, multipayload pointing systems will be studied beginning with phase 2. The design, capabilities, and typical dynamic behavior of the phase 0 version of the CSI evolutionary model (CEM) is documented for investigator both internal and external to NASA. The model description includes line-of-sight pointing measurement, testbed structure, actuators, sensors, and real time computers, as well as finite element and state space models of major components.

External RNA Controls Consortium Beta Version Update.

PubMed

Lee, Hangnoh; Pine, P Scott; McDaniel, Jennifer; Salit, Marc; Oliver, Brian

2016-01-01

Spike-in RNAs are valuable controls for a variety of gene expression measurements. The External RNA Controls Consortium developed test sets that were used in a number of published reports. Here we provide an authoritative table that summarizes, updates, and corrects errors in the test version that ultimately resulted in the certified Standard Reference Material 2374. We have noted existence of anti-sense RNA controls in the material, corrected sub-pool memberships, and commented on control RNAs that displayed inconsistent behavior.

Data-Based Predictive Control with Multirate Prediction Step

NASA Technical Reports Server (NTRS)

Barlow, Jonathan S.

2010-01-01

Data-based predictive control is an emerging control method that stems from Model Predictive Control (MPC). MPC computes current control action based on a prediction of the system output a number of time steps into the future and is generally derived from a known model of the system. Data-based predictive control has the advantage of deriving predictive models and controller gains from input-output data. Thus, a controller can be designed from the outputs of complex simulation code or a physical system where no explicit model exists. If the output data happens to be corrupted by periodic disturbances, the designed controller will also have the built-in ability to reject these disturbances without the need to know them. When data-based predictive control is implemented online, it becomes a version of adaptive control. One challenge of MPC is computational requirements increasing with prediction horizon length. This paper develops a closed-loop dynamic output feedback controller that minimizes a multi-step-ahead receding-horizon cost function with multirate prediction step. One result is a reduced influence of prediction horizon and the number of system outputs on the computational requirements of the controller. Another result is an emphasis on portions of the prediction window that are sampled more frequently. A third result is the ability to include more outputs in the feedback path than in the cost function.

Evaluation of snow modeling with Noah and Noah-MP land surface models in NCEP GFS/CFS system

NASA Astrophysics Data System (ADS)

Dong, J.; Ek, M. B.; Wei, H.; Meng, J.

2017-12-01

Land surface serves as lower boundary forcing in global forecast system (GFS) and climate forecast system (CFS), simulating interactions between land and the atmosphere. Understanding the underlying land model physics is a key to improving weather and seasonal prediction skills. With the upgrades in land model physics (e.g., release of newer versions of a land model), different land initializations, changes in parameterization schemes used in the land model (e.g., land physical parametrization options), and how the land impact is handled (e.g., physics ensemble approach), it always prompts the necessity that climate prediction experiments need to be re-conducted to examine its impact. The current NASA LIS (version 7) integrates NOAA operational land surface and hydrological models (NCEP's Noah, versions from 2.7.1 to 3.6 and the future Noah-MP), high-resolution satellite and observational data, and land DA tools. The newer versions of the Noah LSM used in operational models have a variety of enhancements compared to older versions, where the Noah-MP allows for different physics parameterization options and the choice could have large impact on physical processes underlying seasonal predictions. These impacts need to be reexamined before implemented into NCEP operational systems. A set of offline numerical experiments driven by the GFS forecast forcing have been conducted to evaluate the impact of snow modeling with daily Global Historical Climatology Network (GHCN).

[Psychometric properties of the French version of the Effort-Reward Imbalance model].

PubMed

Niedhammer, I; Siegrist, J; Landre, M F; Goldberg, M; Leclerc, A

2000-10-01

Two main models are currently used to evaluate psychosocial factors at work: the Job Strain model developed by Karasek and the Effort-Reward Imbalance model. A French version of the first model has been validated for the dimensions of psychological demands and decision latitude. As regards the second one evaluating three dimensions (extrinsic effort, reward, and intrinsic effort), there are several versions in different languages, but until recently there was no validated French version. The objective of this study was to explore the psychometric properties of the French version of the Effort-Reward Imbalance model in terms of internal consistency, factorial validity, and discriminant validity. The present study was based on the GAZEL cohort and included the 10 174 subjects who were working at the French national electric and gas company (EDF-GDF) and answered the questionnaire in 1998. A French version of Effort-Reward Imbalance was included in this questionnaire. This version was obtained by a standard forward/backward translation procedure. Internal consistency was satisfactory for the three scales of extrinsic effort, reward, and intrinsic effort: Cronbach's Alpha coefficients higher than 0.7 were observed. A one-factor solution was retained for the factor analysis of the scale of extrinsic effort. A three-factor solution was retained for the factor analysis of reward, and these dimensions were interpreted as the factor analysis of intrinsic effort did not support the expected four-dimension structure. The analysis of discriminant validity displayed significant associations between measures of Effort-Reward Imbalance and the variables of sex, age, education level, and occupational grade. This study is the first one supporting satisfactory psychometric properties of the French version of the Effort-Reward Imbalance model. However, the factorial validity of intrinsic effort could be questioned. Furthermore, as most previous studies were based on male samples working in specific occupations, the present one is also one of the first to show strong associations between measures of this model and social class variables in a population of men and women employed in various occupations.

A computationally tractable version of the collective model

NASA Astrophysics Data System (ADS)

Rowe, D. J.

2004-05-01

A computationally tractable version of the Bohr-Mottelson collective model is presented which makes it possible to diagonalize realistic collective models and obtain convergent results in relatively small appropriately chosen subspaces of the collective model Hilbert space. Special features of the proposed model are that it makes use of the beta wave functions given analytically by the softened-beta version of the Wilets-Jean model, proposed by Elliott et al., and a simple algorithm for computing SO(5)⊃SO(3) spherical harmonics. The latter has much in common with the methods of Chacon, Moshinsky, and Sharp but is conceptually and computationally simpler. Results are presented for collective models ranging from the spherical vibrator to the Wilets-Jean and axially symmetric rotor-vibrator models.

Cryogenic Pressure Control Modeling for Ellipsoidal Space Tanks

NASA Technical Reports Server (NTRS)

Lopez, Alfredo; Grayson, Gary D.; Chandler, Frank O.; Hastings, Leon J.; Heyadat, Ali

2007-01-01

A computational fluid dynamics (CFD) model is developed to simulate pressure control of an ellipsoidal-shaped liquid hydrogen tank under external heating in normal gravity. Pressure control is provided by an axial jet thermodynamic vent system (TVS) centered within the vessel that injects cooler liquid into the tank, mixing the contents and reducing tank pressure. The two-phase cryogenic tank model considers liquid hydrogen in its own vapor with liquid density varying with temperature only and a fully compressible ullage. The axisymmetric model is developed using a custom version of the commercially available FLOW-31) software. Quantitative model validation is ,provided by engineering checkout tests performed at Marshall Space Flight Center in 1999 in support of the Solar Thermal Upper Stage_ Technology Demonstrator (STUSTD) program. The engineering checkout tests provide cryogenic tank self-pressurization test data at various heat leaks and tank fill levels. The predicted self-pressurization rates, ullage and liquid temperatures at discrete locations within the STUSTD tank are in good agreement with test data. The work presented here advances current CFD modeling capabilities for cryogenic pressure control and helps develop a low cost CFD-based design process for space hardware.

FHWA Traffic Noise Model user's guide (version 2.5 addendum)

DOT National Transportation Integrated Search

2004-04-30

In March 1998, the Federal Highway Administration (FHWA), Office of Natural and Human Environment, released the FHWA Traffic Noise Model (TNM), Version 1.0, a state-of-the-art computer model for highway traffic noise prediction and analysis. Since th...

Assessment of parental overt and covert control of child's food intake: a population-based validation study with mothers of preschoolers.

PubMed

Nowicka, Paulina; Flodmark, Carl-Erik; Hales, Derek; Faith, Myles S

2014-12-01

Overt and covert control are novel constructs representing two different parental feeding practices with regard to the child's ability to detect them. Preliminary research indicates that covert control is linked to a healthier diet and lower child weight status. In this study, we report the first psychometric validation of the original measures of overt and covert control outside the UK in a large sample of parents of preschoolers. Based on records from the population register, all mothers of 4-year-olds (n = 3007) from the third largest city in Sweden, Malmö, were contacted by mail. Out of those, 876 returned the measures of overt and covert control together with a background questionnaire and the Child Feeding Questionnaire (CFQ). Test-retest data were obtained from 64% (n = 563) of these mothers. The mean age of the mothers was 35.6 years; their mean BMI was 24.1, 31.5% were overweight or obese. The children were on average 4.5 years old; 48% were girls, 12.8% were overweight or obese. While the fit for the original 9-item 2-factor model was poor, shorter 8- and 6-item versions were supported by confirmatory factor analysis (CFI > 0.95, RMSEA < 0.05). Internal and test–retest reliability of the shorter version was good (ICC= 0.65-0.71). Results also suggest that the factor structure and loadings were invariant(i.e., did not significantly differ) over time and between child sexes. Both overt and covert control factors were moderately correlated with CFQ monitoring. Overt control was also moderately related to CFQ pressure and weakly correlated with CFQ restriction. Covert control, on the other hand, was moderately related to restriction and not related with pressure. Correlations of both factors with child and parent BMI were very small. We found good psychometric properties of the revised versions of the overt and control behaviors ina multiethnic sample of mothers from Sweden. Future studies need to establish causal associations between overt and covert control and the obesity related outcomes.

2014 Version 7.0 Technical Support Document (TSD)

EPA Pesticide Factsheets

The 2014 Version 7 document describes the processing of emission inventories into inputs for the Community Multiscale Air Quality model for use in the 2014 National Air Toxics Assessment initial modeling.

Publisher Correction: Nanoplasmonic electron acceleration by attosecond-controlled forward rescattering in silver clusters.

PubMed

Passig, Johannes; Zherebtsov, Sergey; Irsig, Robert; Arbeiter, Mathias; Peltz, Christian; Göde, Sebastian; Skruszewicz, Slawomir; Meiwes-Broer, Karl-Heinz; Tiggesbäumker, Josef; Kling, Matthias F; Fennel, Thomas

2018-02-07

The original PDF version of this Article contained an error in Equation 1. The original HTML version of this Article contained errors in Equation 2 and Equation 4. These errors have now been corrected in both the PDF and the HTML versions of the Article.

Brugga basin's TACD Model Adaptation to current GIS PCRaster 4.1

NASA Astrophysics Data System (ADS)

Lopez Rozo, Nicolas Antonio; Corzo Perez, Gerald Augusto; Santos Granados, Germán Ricardo

2017-04-01

The process-oriented catchment model TACD (Tracer-Aided Catchment model - Distributed) was developed in the Brugga Basin (Dark Forest, Germany) with a modular structure in the Geographic Information System PCRaster Version 2, in order to dynamically model the natural processes of a complex Basin, such as rainfall, air temperature, solar radiation, evapotranspiration and flow routing among others. Further research and application on this model has been done, such as adapting other meso-scaled basins and adding erosion processes in the hydrological model. However, TACD model is computationally intensive. This has made it not efficient on large and well discretized river basins. Aswell, the current version is not compatible with latest PCRaster Version 4.1, which offers new capabilities on 64-bit hardware architecture, hydraulic calculation improvements, in maps creation, some error and bug fixes. The current work studied and adapted TACD model into the latest GIS PCRaster Version 4.1. This was done by editing the original scripts, replacing deprecated functionalities without losing correctness of the TACD model. The correctness of the adapted TACD model was verified by using the original study case of the Brugga Basin and comparing the adapted model results with the original model results by Stefan Roser in 2001. Small differences were found due to the fact that some hydraulic and hydrological routines were optimized since version 2 of GIS PCRaster. Therefore, the hydraulic and hydrological processes are well represented. With this new working model, further research and development on current topics like uncertainty analysis, GCM downscaling techniques and spatio-temporal modelling are encouraged.

Blood Pressure Control

NASA Technical Reports Server (NTRS)

1992-01-01

Engineering Development Lab., Inc.'s E-2000 Neck Baro Reflex System was developed for cardiovascular studies of astronauts. It is regularly used on Space Shuttle Missions, and a parallel version has been developed as a research tool to facilitate studies of blood pressure reflex controls in patients with congestive heart failure, diabetes, etc. An advanced version, the PPC-1000, was developed in 1991, and the technology has been refined substantially. The PPC provides an accurate means of generating pressure for a broad array of laboratory applications. An improved version, the E2010 Barosystem, is anticipated.

STAR adaptation of QR algorithm. [program for solving over-determined systems of linear equations

NASA Technical Reports Server (NTRS)

Shah, S. N.

1981-01-01

The QR algorithm used on a serial computer and executed on the Control Data Corporation 6000 Computer was adapted to execute efficiently on the Control Data STAR-100 computer. How the scalar program was adapted for the STAR-100 and why these adaptations yielded an efficient STAR program is described. Program listings of the old scalar version and the vectorized SL/1 version are presented in the appendices. Execution times for the two versions applied to the same system of linear equations, are compared.

GREET 1.5 : transportation fuel-cycle model. Vol. 1 : methodology, development, use, and results.

DOT National Transportation Integrated Search

1999-10-01

This report documents the development and use of the most recent version (Version 1.5) of the Greenhouse Gases, Regulated Emissions, and Energy Use in Transportation (GREET) model. The model, developed in a spreadsheet format, estimates the full fuel...

Dimensional structure of the Social Interaction Anxiety Scale according to the analysis of data obtained with a German version.

PubMed

Eidecker, Judith; Glöckner-Rist, Angelika; Gerlach, Alexander L

2010-08-01

The Social Interaction and Anxiety Scale (SIAS) is widely used to assess social interaction anxiety. Yet its dimensional structure is still not well-defined. Especially, the conceptual pertinence of three negatively keyed items has been challenged. In this study, dimensionality of the answers of a student sample to a German SIAS version was first analyzed exploratorily. Subsequently, we tested confirmatorily several measurement models specifying different SIAS dimensions, and investigated how these relate to extraversion. The most reasonable model was cross-validated relying on data from healthy controls and social phobia sufferers. All analyses involved methods suited for an adequate handling of ordinal data. The findings confirm that three negatively keyed items are dubious indicators of social interaction anxiety. Thus, only the remaining 17 items should be used for this purpose in future studies. Analyses of their psychometric properties show, in addition, that they apparently tap three different facets of social interaction anxiety. (c) 2010 Elsevier Ltd. All rights reserved.

Simulating unstressed crop development and growth using the Unified Plant Growth Model (UPGM)

USDA-ARS?s Scientific Manuscript database

Since development of the EPIC model in 1989, many versions of the plant growth component have been incorporated into other erosion and crop management models and subsequently modified to meet model objectives (e.g., WEPS, WEPP, SWAT, ALMANAC, GPFARM). This has resulted in different versions of the ...

RELEASE NOTES FOR MODELS-3 VERSION 4.1 PATCH: SMOKE TOOL AND FILE CONVERTER

EPA Science Inventory

This software patch to the Models-3 system corrects minor errors in the Models-3 framework, provides substantial improvements in the ASCII to I/O API format conversion of the File Converter utility, and new functionalities for the SMOKE Tool. Version 4.1 of the Models-3 system...

LANL* V2.0: global modeling and validation

NASA Astrophysics Data System (ADS)

Koller, J.; Zaharia, S.

2011-03-01

We describe in this paper the new version of LANL*. Just like the previous version, this new version V2.0 of LANL* is an artificial neural network (ANN) for calculating the magnetic drift invariant, L*, that is used for modeling radiation belt dynamics and for other space weather applications. We have implemented the following enhancements in the new version: (1) we have removed the limitation to geosynchronous orbit and the model can now be used for any type of orbit. (2) The new version is based on the improved magnetic field model by Tsyganenko and Sitnov (2005) (TS05) instead of the older model by Tsyganenko et al. (2003). We have validated the model and compared our results to L* calculations with the TS05 model based on ephemerides for CRRES, Polar, GPS, a LANL geosynchronous satellite, and a virtual RBSP type orbit. We find that the neural network performs very well for all these orbits with an error typically Δ L* < 0.2 which corresponds to an error of 3% at geosynchronous orbit. This new LANL-V2.0 artificial neural network is orders of magnitudes faster than traditional numerical field line integration techniques with the TS05 model. It has applications to real-time radiation belt forecasting, analysis of data sets involving decades of satellite of observations, and other problems in space weather.

Description and evaluation of tropospheric chemistry and aerosols in the Community Earth System Model (CESM1.2)

DOE PAGES

Tilmes, S.; Lamarque, J. -F.; Emmons, L. K.; ...

2015-01-01

The Community Atmosphere Model (CAM), version 5, is now coupled to extensive tropospheric and stratospheric chemistry, called CAM5-chem, and is available in addition to CAM4-chem in the Community Earth System Model (CESM) version 1.2. The main focus of this paper is to compare the performance of configurations with internally derived "free running" (FR) meteorology and "specified dynamics" (SD) against observations from surface, aircraft, and satellite, as well as understand the origin of the identified differences. We focus on the representation of aerosols and chemistry. All model configurations reproduce tropospheric ozone for most regions based on in situ and satellite observations.more » However, shortcomings exist in the representation of ozone precursors and aerosols. Tropospheric ozone in all model configurations agrees for the most part with ozonesondes and satellite observations in the tropics and the Northern Hemisphere within the variability of the observations. Southern hemispheric tropospheric ozone is consistently underestimated by up to 25%. Differences in convection and stratosphere to troposphere exchange processes are mostly responsible for differences in ozone in the different model configurations. Carbon monoxide (CO) and other volatile organic compounds are largely underestimated in Northern Hemisphere mid-latitudes based on satellite and aircraft observations. Nitrogen oxides (NO x) are biased low in the free tropical troposphere, whereas peroxyacetyl nitrate (PAN) is overestimated in particular in high northern latitudes. The present-day methane lifetime estimates are compared among the different model configurations. These range between 7.8 years in the SD configuration of CAM5-chem and 8.8 years in the FR configuration of CAM4-chem and are therefore underestimated compared to observational estimations. We find that differences in tropospheric aerosol surface area between CAM4 and CAM5 play an important role in controlling the burden of the tropical tropospheric hydroxyl radical (OH), which causes differences in tropical methane lifetime of about half a year between CAM4-chem and CAM5-chem. In addition, different distributions of NO x from lightning explain about half of the difference between SD and FR model versions in both CAM4-chem and CAM5-chem. Remaining differences in the tropical OH burden are due to enhanced tropical ozone burden in SD configurations compared to the FR versions, which are not only caused by differences in chemical production or loss but also by transport and mixing. For future studies, we recommend the use of CAM5-chem configurations, due to improved aerosol description and inclusion of aerosol–cloud interactions. However, smaller tropospheric surface area density in the current version of CAM5-chem compared to CAM4-chem results in larger oxidizing capacity in the troposphere and therefore a shorter methane lifetime.« less

Description and evaluation of tropospheric chemistry and aerosols in the Community Earth System Model (CESM1.2)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Tilmes, S.; Lamarque, J. -F.; Emmons, L. K.

The Community Atmosphere Model (CAM), version 5, is now coupled to extensive tropospheric and stratospheric chemistry, called CAM5-chem, and is available in addition to CAM4-chem in the Community Earth System Model (CESM) version 1.2. The main focus of this paper is to compare the performance of configurations with internally derived "free running" (FR) meteorology and "specified dynamics" (SD) against observations from surface, aircraft, and satellite, as well as understand the origin of the identified differences. We focus on the representation of aerosols and chemistry. All model configurations reproduce tropospheric ozone for most regions based on in situ and satellite observations.more » However, shortcomings exist in the representation of ozone precursors and aerosols. Tropospheric ozone in all model configurations agrees for the most part with ozonesondes and satellite observations in the tropics and the Northern Hemisphere within the variability of the observations. Southern hemispheric tropospheric ozone is consistently underestimated by up to 25%. Differences in convection and stratosphere to troposphere exchange processes are mostly responsible for differences in ozone in the different model configurations. Carbon monoxide (CO) and other volatile organic compounds are largely underestimated in Northern Hemisphere mid-latitudes based on satellite and aircraft observations. Nitrogen oxides (NO x) are biased low in the free tropical troposphere, whereas peroxyacetyl nitrate (PAN) is overestimated in particular in high northern latitudes. The present-day methane lifetime estimates are compared among the different model configurations. These range between 7.8 years in the SD configuration of CAM5-chem and 8.8 years in the FR configuration of CAM4-chem and are therefore underestimated compared to observational estimations. We find that differences in tropospheric aerosol surface area between CAM4 and CAM5 play an important role in controlling the burden of the tropical tropospheric hydroxyl radical (OH), which causes differences in tropical methane lifetime of about half a year between CAM4-chem and CAM5-chem. In addition, different distributions of NO x from lightning explain about half of the difference between SD and FR model versions in both CAM4-chem and CAM5-chem. Remaining differences in the tropical OH burden are due to enhanced tropical ozone burden in SD configurations compared to the FR versions, which are not only caused by differences in chemical production or loss but also by transport and mixing. For future studies, we recommend the use of CAM5-chem configurations, due to improved aerosol description and inclusion of aerosol–cloud interactions. However, smaller tropospheric surface area density in the current version of CAM5-chem compared to CAM4-chem results in larger oxidizing capacity in the troposphere and therefore a shorter methane lifetime.« less

The influence of competition between plant functional types in the Canadian Terrestrial Ecosystem Model (CTEM) v. 2.0

NASA Astrophysics Data System (ADS)

Melton, Joe; Arora, Vivek

2015-04-01

The Canadian Terrestrial Ecosystem Model (CTEM) is the interactive vegetation component in the earth system modelling framework of the Canadian Centre for Climate Modelling and Analysis (CCCma). In its current framework, CTEM uses prescribed fractional coverage of plant functional types (PFTs) in each grid cell. In reality, vegetation cover is continually adjusting to changes in climate, atmospheric composition, and anthropogenic forcing, for example, through human-caused fires and CO2 fertilization. These changes in vegetation spatial patterns occur over timescales of years to centuries as tree migration is a slow process and vegetation distributions inherently have inertia. Here, we present version 2.0 of CTEM that includes a representation of competition between PFTs through a modified version of the Lotka-Volterra (L-V) predator-prey equations. The simulated areal extents of CTEM's seven non-crop PFTs are compared with available observation-based estimates, and simulations using unmodified L-V equations (similar to other models like TRIFFID), to demonstrate that the model is able to represent the broad spatial distributions of its seven PFTs at the global scale. Differences remain, however, since representing the multitude of plant species with just seven non-crop PFTs only allows the large scale climatic controls on the distributions of PFTs to be captured. As expected, PFTs that exist in climate niches are difficult to represent either due to the coarse spatial resolution of the model and the corresponding driving climate or the limited number of PFTs used to model the terrestrial ecosystem processes. The geographic and zonal distributions of primary terrestrial carbon pools and fluxes from the versions of CTEM that use prescribed and dynamically simulated fractional coverage of PFTs compare reasonably with each other and observation-based estimates. These results illustrate that the parametrization of competition between PFTs in CTEM behaves in a reasonably realistic manner while the use of unmodified L-V equations results in unrealistic plant distributions.

Modelling a single phase voltage controlled rectifier using Laplace transforms

NASA Technical Reports Server (NTRS)

Kraft, L. Alan; Kankam, M. David

1992-01-01

The development of a 20 kHz, AC power system by NASA for large space projects has spurred a need to develop models for the equipment which will be used on these single phase systems. To date, models for the AC source (i.e., inverters) have been developed. It is the intent of this paper to develop a method to model the single phase voltage controlled rectifiers which will be attached to the AC power grid as an interface for connected loads. A modified version of EPRI's HARMFLO program is used as the shell for these models. The results obtained from the model developed in this paper are quite adequate for the analysis of problems such as voltage resonance. The unique technique presented in this paper uses the Laplace transforms to determine the harmonic content of the load current of the rectifier rather than a curve fitting technique. Laplace transforms yield the coefficient of the differential equations which model the line current to the rectifier directly.

An empirical study of flight control software reliability

NASA Technical Reports Server (NTRS)

Dunham, J. R.; Pierce, J. L.

1986-01-01

The results of a laboratory experiment in flight control software reliability are reported. The experiment tests a small sample of implementations of a pitch axis control law for a PA28 aircraft with over 14 million pitch commands with varying levels of additive input and feedback noise. The testing which uses the method of n-version programming for error detection surfaced four software faults in one implementation of the control law. The small number of detected faults precluded the conduct of the error burst analyses. The pitch axis problem provides data for use in constructing a model in the prediction of the reliability of software in systems with feedback. The study is undertaken to find means to perform reliability evaluations of flight control software.

Generalized background error covariance matrix model (GEN_BE v2.0)

NASA Astrophysics Data System (ADS)

Descombes, G.; Auligné, T.; Vandenberghe, F.; Barker, D. M.; Barré, J.

2015-03-01

The specification of state background error statistics is a key component of data assimilation since it affects the impact observations will have on the analysis. In the variational data assimilation approach, applied in geophysical sciences, the dimensions of the background error covariance matrix (B) are usually too large to be explicitly determined and B needs to be modeled. Recent efforts to include new variables in the analysis such as cloud parameters and chemical species have required the development of the code to GENerate the Background Errors (GEN_BE) version 2.0 for the Weather Research and Forecasting (WRF) community model. GEN_BE allows for a simpler, flexible, robust, and community-oriented framework that gathers methods used by some meteorological operational centers and researchers. We present the advantages of this new design for the data assimilation community by performing benchmarks of different modeling of B and showing some of the new features in data assimilation test cases. As data assimilation for clouds remains a challenge, we present a multivariate approach that includes hydrometeors in the control variables and new correlated errors. In addition, the GEN_BE v2.0 code is employed to diagnose error parameter statistics for chemical species, which shows that it is a tool flexible enough to implement new control variables. While the generation of the background errors statistics code was first developed for atmospheric research, the new version (GEN_BE v2.0) can be easily applied to other domains of science and chosen to diagnose and model B. Initially developed for variational data assimilation, the model of the B matrix may be useful for variational ensemble hybrid methods as well.

Recent Theoretical Advances in Analysis of AIRS/AMSU Sounding Data

NASA Technical Reports Server (NTRS)

Susskind, Joel

2007-01-01

AIRS was launched on EOS Aqua on May 4,2002, together with AMSU-A and HSB, to form a next generation polar orbiting infrared and microwave atmospheric sounding system. This paper describes the AIRS Science Team Version 5.0 retrieval algorithm. Starting in early 2007, the Goddard DAAC will use this algorithm to analyze near real time AIRS/AMSU observations. These products are then made available to the scientific community for research purposes. The products include twice daily measurements of the Earth's three dimensional global temperature, water vapor, and ozone distribution as well as cloud cover. In addition, accurate twice daily measurements of the earth's land and ocean temperatures are derived and reported. Scientists use this important set of observations for two major applications. They provide important information for climate studies of global and regional variability and trends of different aspects of the earth's atmosphere. They also provide information for researchers to improve the skill of weather forecasting. A very important new product of the AIRS Version 5 algorithm is accurate case-by-case error estimates of the retrieved products. This heightens their utility for use in both weather and climate applications. These error estimates are also used directly for quality control of the retrieved products. Version 5 also allows for accurate quality controlled AIRS only retrievals, called "Version 5 AO retrievals" which can be used as a backup methodology if AMSU fails. Examples of the accuracy of error estimates and quality controlled retrieval products of the AIRS/AMSU Version 5 and Version 5 AO algorithms are given, and shown to be significantly better than the previously used Version 4 algorithm. Assimilation of Version 5 retrievals are also shown to significantly improve forecast skill, especially when the case-by-case error estimates are utilized in the data assimilation process.

A users' guide to the trace contaminant control simulation computer program

NASA Technical Reports Server (NTRS)

Perry, J. L.

1994-01-01

The Trace Contaminant Control Simulation computer program is a tool for assessing the performance of various trace contaminant control technologies for removing trace chemical contamination from a spacecraft cabin atmosphere. The results obtained from the program can be useful in assessing different technology combinations, system sizing, system location with respect to other life support systems, and the overall life cycle economics of a trace contaminant control system. The user's manual is extracted in its entirety from NASA TM-108409 to provide a stand-alone reference for using any version of the program. The first publication of the manual as part of TM-108409 also included a detailed listing of version 8.0 of the program. As changes to the code were necessary, it became apparent that the user's manual should be separate from the computer code documentation and be general enough to provide guidance in using any version of the program. Provided in the guide are tips for input file preparation, general program execution, and output file manipulation. Information concerning source code listings of the latest version of the computer program may be obtained by contacting the author.

Angle-of-Attack-Modulated Terminal Point Control for Neptune Aerocapture

NASA Technical Reports Server (NTRS)

Queen, Eric M.

2004-01-01

An aerocapture guidance algorithm based on a calculus of variations approach is developed, using angle of attack as the primary control variable. Bank angle is used as a secondary control to alleviate angle of attack extremes and to control inclination. The guidance equations are derived in detail. The controller has very small onboard computational requirements and is robust to atmospheric and aerodynamic dispersions. The algorithm is applied to aerocapture at Neptune. Three versions of the controller are considered with varying angle of attack authority. The three versions of the controller are evaluated using Monte Carlo simulations with expected dispersions.

MATHEMATICAL MODEL OF ELECTROSTATIC PRECIPITATION FOR THE TEXAS INSTRUMENTS PROGRAMMABLE 59 CALCULATOR

EPA Science Inventory

The report describes a version of EPA's electrostatic precipitator (ESP) model suitable for use on a Texas Instruments Programmable 59 (TI-59) hand-held calculator. This version of the model allows the calculation of ESP collection efficiency, including corrections for non-ideal ...

Three Dimensional Thermal Pollution Models. Volume 2; Rigid-Lid Models

NASA Technical Reports Server (NTRS)

Lee, S. S.; Sengupta, S.

1978-01-01

Three versions of rigid lid programs are presented: one for near field simulation; the second for far field unstratified situations; and the third for stratified basins, far field simulation. The near field simulates thermal plume areas, and the far field version simulates larger receiving aquatic ecosystems. Since these versions have many common subroutines, a unified testing is provided, with main programs for the three possible conditions listed.

Time Series Analysis of Photovoltaic Soiling Station Data: Version 1.0, August 2017

DOE Office of Scientific and Technical Information (OSTI.GOV)

Micheli, Leonardo; Muller, Matthew T.; Deceglie, Michael G.

The time series data from PV soiling stations, operating in the USA, at different time periods are analyzed and presented. The current version of the paper includes twenty stations operating between 2013 and 2016, but the paper is intended to be periodically updated as more stations and more data become available. The challenges in working with soiling stations data are discussed, including measurement methodology, quality controls, and measurement uncertainty. The soiling profiles of the soiling stations are made available so that the PV community can make use of this data to guide operations and maintence decisions, estimate soiling derate inmore » performance models, and more generally come to a better understanding of the challenges associated with the variability of PV soiling.« less

Distributed Visualization Project

NASA Technical Reports Server (NTRS)

Craig, Douglas; Conroy, Michael; Kickbusch, Tracey; Mazone, Rebecca

2016-01-01

Distributed Visualization allows anyone, anywhere to see any simulation at any time. Development focuses on algorithms, software, data formats, data systems and processes to enable sharing simulation-based information across temporal and spatial boundaries without requiring stakeholders to possess highly-specialized and very expensive display systems. It also introduces abstraction between the native and shared data, which allows teams to share results without giving away proprietary or sensitive data. The initial implementation of this capability is the Distributed Observer Network (DON) version 3.1. DON 3.1 is available for public release in the NASA Software Store (https://software.nasa.gov/software/KSC-13775) and works with version 3.0 of the Model Process Control specification (an XML Simulation Data Representation and Communication Language) to display complex graphical information and associated Meta-Data.

Variation in working memory capacity and cognitive control: goal maintenance and microadjustments of control.

PubMed

Unsworth, Nash; Redick, Thomas S; Spillers, Gregory J; Brewer, Gene A

2012-01-01

Variation in working memory capacity (WMC) and cognitive control was examined in four experiments. In the experiments high- and low-WMC individuals performed a choice reaction time task (Experiment 1), a version of the antisaccade task (Experiment 2), a version of the Stroop task (Experiment 3), and an arrow version of the flanker task (Experiment 4). An examination of response time distributions suggested that high- and low-WMC individuals primarily differed in the slowest responses in each experiment, consistent with the notion that WMC is related to active maintenance abilities. Examination of two indicators of microadjustments of control (posterror slowing and conflict adaptation effects) suggested no differences between high- and low-WMC individuals. Collectively these results suggest that variation in WMC is related to some, but not all, cognitive control operations. The results are interpreted within the executive attention theory of WMC.

The Autism‐Spectrum Quotient in Siblings of People With Autism

PubMed Central

Allison, Carrie; Smith, Paula; Ring, Howard; Auyeung, Bonnie; Baron‐Cohen, Simon

2016-01-01

This study measures the distribution of autistic traits, using the autism‐spectrum quotient (AQ), in siblings of individuals with autism spectrum conditions (ASC). Total AQ scores, along with AQ subscales, were collected from child, adolescent and adult controls, siblings, and volunteers with ASC using one of the three age‐appropriate versions of the instrument: the AQ (adult self‐report), the AQ‐adolescent and AQ‐child (both parent‐reports). We examined the effect of Group (case, sibling and control) and AQ version (adult, adolescent and adult) on total and subscale scores. In addition, we tested for sex differences in all groups and on all versions. We found that in male and female adults, AQ scores in siblings fell between cases and controls (cases > siblings > controls). In children and adolescents, female siblings also scored higher than control females (female cases > female siblings > female controls), but there was no difference between male siblings and controls (male cases > male siblings = male controls). An investigation of subscale scores revealed that male siblings only differed from controls on the “Communication” subscale (male cases > male siblings > male controls), while female siblings differed from controls on all subscales except “Imagination” (female cases > female siblings > female controls). This study confirms the broader autism phenotype in siblings, and reveals this is modulated by sex and AQ version. Autism Res 2017, 10: 289–297. © 2016 The Authors Autism Research published by Wiley Periodicals, Inc. on behalf of International Society for Autism Research. PMID:27333365

Capability and Development Risk Management in System-of-Systems Architectures: A Portfolio Approach to Decision-Making

DTIC Science & Technology

2012-04-30

tool that provides a means of balancing capability development against cost and interdependent risks through the use of modern portfolio theory ...Focardi, 2007; Tutuncu & Cornuejols, 2007) that are extensions of modern portfolio and control theory . The reformulation allows for possible changes...Acquisition: Wave Model context • An Investment Portfolio Approach – Mean Variance Approach – Mean - Variance : A Robust Version • Concept

Automatic Traffic-Based Internet Control Message Protocol (ICMP) Model Generation for ns-3

DTIC Science & Technology

2015-12-01

through visiting the inferred automata o Fuzzing of an implementation by generating altered message formats We tested with 3 versions of Netzob. First...relationships. Afterwards, we used the Automata module to generate state machines using different functions: “generateChainedStateAutomata...The “generatePTAAutomata” takes as input several communication sessions and then identifies common paths and merges these into a single automata . The

Methodological Foundations for Designing Intelligent Computer-Based Training

DTIC Science & Technology

1991-09-03

student models, graphic forms, version control data structures, flowcharts , etc. Circuit simulations are an obvious case. A circuit, after all, can... flowcharts as a basic data structure, and we were able to generalize our tools to create a flowchart drawing tool for inputting both the appearance and...the meaning of flowcharts efficiently. For the Sherlock work, we built a tool that permitted inputting of information about front panels and

DoD Net-Centric Services Strategy Implementation in the C2 Domain

DTIC Science & Technology

2010-02-01

those for monolingual thesauri indicated in ANSI/NISO Z39.19-2005 and ISO 2788-1986. Also, the versioning regimen in the KOS must be robust, a...Metadata Registry: Repository of all metadata related to data structures, models, dictionaries , taxonomies, schema, and other engineering artifacts that...access information, schemas, style sheets, controlled vocabularies, dictionaries , and other work products. It would normally be discovered via a

miRanalyzer: an update on the detection and analysis of microRNAs in high-throughput sequencing experiments

PubMed Central

Hackenberg, Michael; Rodríguez-Ezpeleta, Naiara; Aransay, Ana M.

2011-01-01

We present a new version of miRanalyzer, a web server and stand-alone tool for the detection of known and prediction of new microRNAs in high-throughput sequencing experiments. The new version has been notably improved regarding speed, scope and available features. Alignments are now based on the ultrafast short-read aligner Bowtie (granting also colour space support, allowing mismatches and improving speed) and 31 genomes, including 6 plant genomes, can now be analysed (previous version contained only 7). Differences between plant and animal microRNAs have been taken into account for the prediction models and differential expression of both, known and predicted microRNAs, between two conditions can be calculated. Additionally, consensus sequences of predicted mature and precursor microRNAs can be obtained from multiple samples, which increases the reliability of the predicted microRNAs. Finally, a stand-alone version of the miRanalyzer that is based on a local and easily customized database is also available; this allows the user to have more control on certain parameters as well as to use specific data such as unpublished assemblies or other libraries that are not available in the web server. miRanalyzer is available at http://bioinfo2.ugr.es/miRanalyzer/miRanalyzer.php. PMID:21515631

Patient compliance with antihypertensive medication.

PubMed Central

Hershey, J C; Morton, B G; Davis, J B; Reichgott, M J

1980-01-01

Self-reported medication taking compliance behavior of 132 high blood pressure patients was analyzed using an expanded version of the health belief model. Subjects were selected through random sampling procedures from regular hypertension program sessions at a large urban hospital. A questionnaire was constructed to measure the model components, and interviews were conducted with each patient. Bivariate analysis showed that control over health matters, dependence on providers, perceived barriers, duration of treatment, and others' nonconfirming experience were significantly related to compliance (p < .05). Log-linear multivariate analysis revealed that three of these five variables--control over health matters, perceived barriers, and duration of treatment--contributed independently to patient compliance. Self-reported medication taking was significantly related to blood pressure control (p < .02). These data provide the basis for developing interventions for providers to facilitate the medication taking behavior of clinic patients. PMID:7416325

Control of transversal instabilities in reaction-diffusion systems

NASA Astrophysics Data System (ADS)

Totz, Sonja; Löber, Jakob; Totz, Jan Frederik; Engel, Harald

2018-05-01

In two-dimensional reaction-diffusion systems, local curvature perturbations on traveling waves are typically damped out and vanish. However, if the inhibitor diffuses much faster than the activator, transversal instabilities can arise, leading from flat to folded, spatio-temporally modulated waves and to spreading spiral turbulence. Here, we propose a scheme to induce or inhibit these instabilities via a spatio-temporal feedback loop. In a piecewise-linear version of the FitzHugh–Nagumo model, transversal instabilities and spiral turbulence in the uncontrolled system are shown to be suppressed in the presence of control, thereby stabilizing plane wave propagation. Conversely, in numerical simulations with the modified Oregonator model for the photosensitive Belousov–Zhabotinsky reaction, which does not exhibit transversal instabilities on its own, we demonstrate the feasibility of inducing transversal instabilities and study the emerging wave patterns in a well-controlled manner.

EOS MLS Level 2 Data Processing Software Version 3

NASA Technical Reports Server (NTRS)

Livesey, Nathaniel J.; VanSnyder, Livesey W.; Read, William G.; Schwartz, Michael J.; Lambert, Alyn; Santee, Michelle L.; Nguyen, Honghanh T.; Froidevaux, Lucien; wang, Shuhui; Manney, Gloria L.;

Enhancements to the caliop aerosol subtyping and lidar ratio selection algorithms for level II version 4

NASA Astrophysics Data System (ADS)

Omar, A.; Tackett, J.; Kim, M.-H.; Vaughan, M.; Kar, J.; Trepte, C.; Winker, D.

2018-04-01

Several enhancements have been implemented for the version 4 aerosol subtyping and lidar ratio selection algorithms of Cloud Aerosol Lidar with Orthogonal Polarization (CALIOP). Version 4 eliminates the confusion between smoke and clean marine aerosols seen in version 3 by modifications to the elevated layer flag definitions used to identify smoke aerosols over the ocean. To differentiate between mixtures of dust and smoke, and dust and marine aerosols, a new aerosol type will be added in the version 4 data products. In the marine boundary layer, moderately depolarizing aerosols are no longer modeled as mixtures of dust and smoke (polluted dust) but rather as mixtures of dust and seasalt (dusty marine). Some lidar ratios have been updated in the version 4 algorithms. In particular, the dust lidar ratios have been adjusted to reflect the latest measurements and model studies.

A mathematical model of an active control landing gear for load control during impact and roll-out

NASA Technical Reports Server (NTRS)

Mcgehee, J. R.; Carden, H. D.

1976-01-01

A mathematical model of an active control landing gear (ACOLAG) was developed and programmed for operation on a digital computer. The mathematical model includes theoretical subsonic aerodynamics; first-mode wing bending and torsional characteristics; oleo-pneumatic shock strut with fit and binding friction; closed-loop, series-hydraulic control; empirical tire force-deflection characteristics; antiskid braking; and sinusoidal or random runway roughness. The mathematical model was used to compute the loads and motions for a simulated vertical drop test and a simulated landing impact of a conventional (passive) main landing gear designed for a 2268-kg (5000-lbm) class airplane. Computations were also made for a simply modified version of the passive gear including a series-hydraulic active control system. Comparison of computed results for the passive gear with experimental data shows that the active control landing gear analysis is valid for predicting the loads and motions of an airplane during a symmetrical landing. Computed results for the series-hydraulic active control in conjunction with the simply modified passive gear show that 20- to 30-percent reductions in wing force, relative to those occurring with the modified passive gear, can be obtained during the impact phase of the landing. These reductions in wing force could result in substantial increases in fatigue life of the structure.

21 CFR 290.6 - Spanish-language version of required warning.

Code of Federal Regulations, 2011 CFR

2011-04-01

... 21 Food and Drugs 4 2011-04-01 2011-04-01 false Spanish-language version of required warning. 290.6 Section 290.6 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) DRUGS: GENERAL CONTROLLED DRUGS General Provisions § 290.6 Spanish-language version of required...

Geometric Modelling of Tree Roots with Different Levels of Detail

NASA Astrophysics Data System (ADS)

Guerrero Iñiguez, J. I.

2017-09-01

This paper presents a geometric approach for modelling tree roots with different Levels of Detail, suitable for analysis of the tree anchoring, potentially occupied underground space, interaction with urban elements and damage produced and taken in the built-in environment. Three types of tree roots are considered to cover several species: tap root, heart shaped root and lateral roots. Shrubs and smaller plants are not considered, however, a similar approach can be considered if the information is available for individual species. The geometrical approach considers the difficulties of modelling the actual roots, which are dynamic and almost opaque to direct observation, proposing generalized versions. For each type of root, different geometric models are considered to capture the overall shape of the root, a simplified block model, and a planar or surface projected version. Lower detail versions are considered as compatibility version for 2D systems while higher detail models are suitable for 3D analysis and visualization. The proposed levels of detail are matched with CityGML Levels of Detail, enabling both analysis and aesthetic views for urban modelling.

Solving Navier-Stokes Equations with Advanced Turbulence Models on Three-Dimensional Unstructured Grids

NASA Technical Reports Server (NTRS)

Wang, Qun-Zhen; Massey, Steven J.; Abdol-Hamid, Khaled S.; Frink, Neal T.

1999-01-01

USM3D is a widely-used unstructured flow solver for simulating inviscid and viscous flows over complex geometries. The current version (version 5.0) of USM3D, however, does not have advanced turbulence models to accurately simulate complicated flows. We have implemented two modified versions of the original Jones and Launder k-epsilon two-equation turbulence model and the Girimaji algebraic Reynolds stress model in USM3D. Tests have been conducted for two flat plate boundary layer cases, a RAE2822 airfoil and an ONERA M6 wing. The results are compared with those of empirical formulae, theoretical results and the existing Spalart-Allmaras one-equation model.

Comparing Student Performance on the Old vs New Versions of the NAPLEX.

PubMed

Welch, Adam C; Karpen, Samuel C

2018-04-01

Objective. To determine if the new 2016 version of the North American Pharmacy Licensure Examination (NAPLEX) affected scores when controlling for student performance on other measures using data from one institution. Methods. There were 201 records from the classes of 2014-2016. Doubly robust estimation using weighted propensity scores was used to compare NAPLEX scaled scores and pass rates while considering student performance on other measures. Of the potential controllers of student performance: Pharmacy Curricular Outcomes Assessment (PCOA), scaled composite scores from the Pharmacy College Admission Test (PCAT), and P3 Grade Point Average (GPA). Only PCOA and P3 GPA were found to be appropriate for propensity scoring. Results. The weighted NAPLEX scaled scores did not significantly drop from the old (2014-2015) to the new (2016) version of NAPLEX. The change in pass rates between the new and old versions of NAPLEX were also non-significant. Conclusion. Using data from one institution, the new version itself of the NAPLEX did not have a significant effect on NAPLEX scores or first-time pass rates when controlling for student performance on other measures. Colleges are encouraged to repeat this analysis with pooled data and larger sample sizes.

Schizophrenia illness severity is associated with reduced loss aversion.

PubMed

Currie, James; Buruju, Dheeraj; Perrin, Jennifer S; Reid, Ian C; Steele, J Douglas; Feltovich, Nick

2017-06-01

Loss aversion, whereby losses weigh more heavily than equal-sized gains, has been demonstrated in many decision-making settings. Previous research has suggested reduced loss aversion in schizophrenia, but with little evidence of a link between loss aversion and schizophrenia illness severity. In this study, 20 individuals with schizophrenia and 16 control participants, matched by age and sex, played two versions of the Iterated Prisoners' Dilemma, one version with only positive payoffs and another version in which negative payoffs were possible, with the second version being derived from the first by subtracting a constant value from all payoffs. The control group demonstrated significantly lower cooperation rates under negative payoffs, compared with the version with only positive payoffs, indicative of loss aversion. The patient group on average showed no loss aversion response. Moreover, the extent of loss aversion in patients was found to be negatively correlated with schizophrenia illness severity, with less ill patients showing loss aversion more similar to controls. Results were found to be robust to the inclusion of potential confounding factors as covariates within rigorous probit regression analyses. Reduced loss aversion is a feature of schizophrenia and related to illness severity. Copyright © 2017. Published by Elsevier B.V.

AEOSS design guide for system analysis on Advanced Earth-Orbital Spacecraft Systems

NASA Technical Reports Server (NTRS)

Lee, Hwa-Ping

1990-01-01

Advanced Earth Orbital Spacecraft System (AEOSS) enables users to project the requried power, weight, and cost for a generic earth-orbital spacecraft system. These variables are calculated on the component and subsystem levels, and then the system level. The included six subsystems are electric power, thermal control, structure, auxillary propulsion, attitude control, and communication, command, and data handling. The costs are computed using statistically determined models that were derived from the flown spacecraft in the past and were categorized into classes according to their functions and structural complexity. Selected design and performance analyses for essential components and subsystems are also provided. AEOSS has the feature permitting a user to enter known values of these parameters, totally and partially, at all levels. All information is of vital importance to project managers of subsystems or a spacecraft system. AEOSS is a specially tailored software coded from the relational database program of the Acius; 4th Dimension with a Macintosh version. Because of the licensing agreement, two versions of the AEOSS documents were prepared. This version AEOSS Design Guide, is for users to exploit the full capacity of the 4th Dimension. It is for a user who wants to alter or expand the program structures, the program statements, and the program procedures. The user has to possess a 4th Dimension first.

78 FR 32224 - Availability of Version 3.1.2 of the Connect America Fund Phase II Cost Model; Additional...

Federal Register 2010, 2011, 2012, 2013, 2014

2013-05-29

... Version 3.1.2 of the Connect America Fund Phase II Cost Model; Additional Discussion Topics in Connect America Cost Model Virtual Workshop AGENCY: Federal Communications Commission. ACTION: Proposed rule... America Cost Model (CAM v3.1.2), which allows Commission staff and interested parties to calculate costs...

78 FR 14533 - Official Release of EMFAC2011 Motor Vehicle Emission Factor Model for Use in the State of California

Federal Register 2010, 2011, 2012, 2013, 2014

2013-03-06

... testing of interim versions of the model with air districts and Metropolitan Planning Organizations (MPOs... Motor Vehicle Emission Factor Model for Use in the State of California AGENCY: Environmental Protection... of the latest version of the California EMFAC model (short for EMission FACtor) for use in state...

Alternative Factor Models and Heritability of the Short Leyton Obsessional Inventory--Children's Version

ERIC Educational Resources Information Center

Moore, Janette; Smith, Gillian W.; Shevlin, Mark; O'Neill, Francis A.

2010-01-01

An alternative models framework was used to test three confirmatory factor analytic models for the Short Leyton Obsessional Inventory-Children's Version (Short LOI-CV) in a general population sample of 517 young adolescent twins (11-16 years). A one-factor model as implicit in current classification systems of Obsessive-Compulsive Disorder (OCD),…

EVALUATION OF THE COMMUNITY MULTISCALE AIR QUALITY (CMAQ) MODEL VERSION 4.5: UNCERTAINTIES AND SENSITIVITIES IMPACTING MODEL PERFORMANCE: PART I - OZONE

EPA Science Inventory

This study examines ozone (O₃) predictions from the Community Multiscale Air Quality (CMAQ) model version 4.5 and discusses potential factors influencing the model results. Daily maximum 8-hr average O₃ levels are largely underpredicted when observed O_...

A Hemispheric Version of the Community Multiscale Air Quality (CMAQ) Modeling System

EPA Science Inventory

This invited presentation will be given at the 4th Biannual Western Modeling Workshop in the Plenary session on Global model development, evaluation, and new source attribution tools. We describe the development and application of the hemispheric version of the CMAQ to examine th...

Performance Assessment of New Land-Surface and Planetary Boundary Layer Physics in the WRF-ARW

EPA Science Inventory

The Pleim-Xiu land surface model, Pleim surface layer scheme, and Asymmetric Convective Model (version 2) are now options in version 3.0 of the Weather Research and Forecasting model (WRF) Advanced Research WRF (ARW) core. These physics parameterizations were developed for the f...

Incremental Testing of the Community Multiscale Air Quality (CMAQ) Modeling System Version 4.7

EPA Science Inventory

This paper describes the scientific and structural updates to the latest release of the Community Multiscale Air Quality (CMAQ) modeling system version 4.7 (v4.7) and points the reader to additional resources for further details. The model updates were evaluated relative to obse...

Validating the Demand Control Support Questionnaire among white-collar employees in Switzerland and the United States.

PubMed

Mauss, Daniel; Herr, Raphael M; Theorell, Töres; Angerer, Peter; Li, Jian

2018-01-01

The Demand Control Support Questionnaire (DCSQ) is an established self-reported tool to measure a stressful work environment. Validated German and English versions are however currently missing. The aim of this study was therefore to evaluate the psychometric properties of German and English versions of the DCSQ among white-collar employees in Switzerland and the US. This cross-sectional study was carried out on 499 employees in Switzerland and 411 in the US, respectively. The 17-item DCSQ with three scales assessed psychosocial stress at work (psychological demands, decision latitude, and social support at work). Depressive symptoms were measured by the 2-item Patient Health Questionnaire. Cronbach's α and item-total correlations tested the scale reliability (internal consistency). Construct validity of the questionnaire was examined using exploratory factor analysis (EFA). Logistic regressions estimated associations of each scale and job strain with depressive symptoms (criterion validity). In both samples, all DCSQ scales presented satisfactory internal consistency (Cronbach's α ≥ 0.72; item-total correlations ≥ 0.33), and EFA showed the 17 items loading on three factors, which is in line with the theoretically assumed structure of the DCSQ construct. Moreover, all three scales as well as high job strain were significantly associated with depressive symptoms. The associations were stronger in the US sample. The German and the English versions of the DCSQ seem to be reliable and valid instruments to measure psychosocial stress based on the job demand-control-support model in the workplace of white-collar employees in Switzerland and the US.

Mars Global Reference Atmospheric Model (Mars-GRAM): Release No. 2 - Overview and applications

NASA Technical Reports Server (NTRS)

James, B.; Johnson, D.; Tyree, L.

1993-01-01

The Mars Global Reference Atmospheric Model (Mars-GRAM), a science and engineering model for empirically parameterizing the temperature, pressure, density, and wind structure of the Martian atmosphere, is described with particular attention to the model's newest version, Mars-GRAM, Release No. 2 and to the improvements incorporated into the Release No. 2 model as compared with the Release No. 1 version. These improvements include (1) an addition of a new capability to simulate local-scale Martian dust storms and the growth and decay of these storms; (2) an addition of the Zurek and Haberle (1988) wave perturbation model, for simulating tidal perturbation effects; and (3) a new modular version of Mars-GRAM, for incorporation as a subroutine into other codes.

3MRA UNCERTAINTY AND SENSITIVITY ANALYSIS

EPA Science Inventory

This presentation discusses the Multimedia, Multipathway, Multireceptor Risk Assessment (3MRA) modeling system. The outline of the presentation is: modeling system overview - 3MRA versions; 3MRA version 1.0; national-scale assessment dimensionality; SuperMUSE: windows-based super...

Psychometric Validation of the English and French Versions of the Posttraumatic Stress Disorder Checklist for DSM-5 (PCL-5).

PubMed

Ashbaugh, Andrea R; Houle-Johnson, Stephanie; Herbert, Christophe; El-Hage, Wissam; Brunet, Alain

2016-01-01

The purpose of this study is to assess the psychometric properties of a French version of the Posttraumatic Stress Disorder Checklist for DSM-5 (PCL-5), a self-report measure of posttraumatic stress disorder (PTSD) symptoms, and to further validate the existing English version of the measure. Undergraduate students (n = 838 English, n = 262 French) completed the PCL-5 as well as other self-report symptom measures of PTSD and depression online. Both the English and French versions PCL-5 total scores demonstrated excellent internal consistency (English: α = .95; French: α = .94), and strong convergent and divergent validity. Strong internal consistency was also observed for each of the four subscales for each version (α's > .79). Test-retest reliability for the French version of the measure was also very good (r = .89). Confirmatory factor analysis indicated that the four-factor DSM-5 model was not a good fit of the data. The seven-factor hybrid model best fit the data in each sample, but was only marginally superior to the six-factor anhedonia model. The French version of the PCL-5 demonstrated the same psychometric qualities as both the English version of the same measure and previous versions of the PCL. Thus clinicians serving French-speaking clients now have access to this highly used screening instrument. With regards to the structural validity of the PCL-5 and of the new PTSD diagnostic structure of the DSM-5, additional research is warranted. Replication of our results in clinical samples is much needed.

Psychometric Validation of the English and French Versions of the Posttraumatic Stress Disorder Checklist for DSM-5 (PCL-5)

PubMed Central

Ashbaugh, Andrea R.; Houle-Johnson, Stephanie; Herbert, Christophe; El-Hage, Wissam; Brunet, Alain

2016-01-01

The purpose of this study is to assess the psychometric properties of a French version of the Posttraumatic Stress Disorder Checklist for DSM-5 (PCL-5), a self-report measure of posttraumatic stress disorder (PTSD) symptoms, and to further validate the existing English version of the measure. Undergraduate students (n = 838 English, n = 262 French) completed the PCL-5 as well as other self-report symptom measures of PTSD and depression online. Both the English and French versions PCL-5 total scores demonstrated excellent internal consistency (English: α = .95; French: α = .94), and strong convergent and divergent validity. Strong internal consistency was also observed for each of the four subscales for each version (α’s > .79). Test-retest reliability for the French version of the measure was also very good (r = .89). Confirmatory factor analysis indicated that the four-factor DSM-5 model was not a good fit of the data. The seven-factor hybrid model best fit the data in each sample, but was only marginally superior to the six-factor anhedonia model. The French version of the PCL-5 demonstrated the same psychometric qualities as both the English version of the same measure and previous versions of the PCL. Thus clinicians serving French-speaking clients now have access to this highly used screening instrument. With regards to the structural validity of the PCL-5 and of the new PTSD diagnostic structure of the DSM-5, additional research is warranted. Replication of our results in clinical samples is much needed. PMID:27723815

Improved radial dose function estimation using current version MCNP Monte-Carlo simulation: Model 6711 and ISC3500 125I brachytherapy sources.

PubMed

Duggan, Dennis M

2004-12-01

Improved cross-sections in a new version of the Monte-Carlo N-particle (MCNP) code may eliminate discrepancies between radial dose functions (as defined by American Association of Physicists in Medicine Task Group 43) derived from Monte-Carlo simulations of low-energy photon-emitting brachytherapy sources and those from measurements on the same sources with thermoluminescent dosimeters. This is demonstrated for two 125I brachytherapy seed models, the Implant Sciences Model ISC3500 (I-Plant) and the Amersham Health Model 6711, by simulating their radial dose functions with two versions of MCNP, 4c2 and 5.

CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (UNIX VERSION)

NASA Technical Reports Server (NTRS)

Donnell, B.

1994-01-01

CLIPS, the C Language Integrated Production System, is a complete environment for developing expert systems -- programs which are specifically intended to model human expertise or knowledge. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. CLIPS 6.0 provides a cohesive tool for handling a wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming allows knowledge to be represented as heuristics, or "rules-of-thumb" which specify a set of actions to be performed for a given situation. Object-oriented programming allows complex systems to be modeled as modular components (which can be easily reused to model other systems or create new components). The procedural programming capabilities provided by CLIPS 6.0 allow CLIPS to represent knowledge in ways similar to those allowed in languages such as C, Pascal, Ada, and LISP. Using CLIPS 6.0, one can develop expert system software using only rule-based programming, only object-oriented programming, only procedural programming, or combinations of the three. CLIPS provides extensive features to support the rule-based programming paradigm including seven conflict resolution strategies, dynamic rule priorities, and truth maintenance. CLIPS 6.0 supports more complex nesting of conditional elements in the if portion of a rule ("and", "or", and "not" conditional elements can be placed within a "not" conditional element). In addition, there is no longer a limitation on the number of multifield slots that a deftemplate can contain. The CLIPS Object-Oriented Language (COOL) provides object-oriented programming capabilities. Features supported by COOL include classes with multiple inheritance, abstraction, encapsulation, polymorphism, dynamic binding, and message passing with message-handlers. CLIPS 6.0 supports tight integration of the rule-based programming features of CLIPS with COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory and require an 80386 CPU or better. Users needing an 8086/8088 or 80286 executable must recompile the CLIPS source code themselves. Users who wish to recompile the DOS executable using Borland C++ or MicroSoft C must use a DOS extender program to produce an executable capable of using extended memory. The version of CLIPS 6.0 for IBM PC compatibles requires DOS v3.3 or later and/or Windows 3.1 or later. It is distributed on a set of three 1.4Mb 3.5 inch diskettes. A hard disk is required. The Macintosh version is distributed in compressed form on two 3.5 inch 1.4Mb Macintosh format diskettes, and requires System 6.0.5, or higher, and 1Mb RAM. The version for DEC VAX/VMS is available in VAX BACKUP format on a 1600 BPI 9-track magnetic tape (standard distribution medium) or a TK50 tape cartridge. The UNIX version is distributed in UNIX tar format on a .25 inch streaming magnetic tape cartridge (Sun QIC-24). For the UNIX version, alternate distribution media and formats are available upon request. The CLIPS 6.0 documentation includes a User's Guide and a three volume Reference Manual consisting of Basic and Advanced Programming Guides and an Interfaces Guide. An electronic version of the documentation is provided on the distribution medium for each version: in MicroSoft Word format for the Macintosh and PC versions of CLIPS, and in both PostScript format and MicroSoft Word for Macintosh format for the UNIX and DEC VAX versions of CLIPS. CLIPS was developed in 1986 and Version 6.0 was released in 1993.

CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (IBM PC VERSION)

NASA Technical Reports Server (NTRS)

Donnell, B.

1994-01-01

CLIPS, the C Language Integrated Production System, is a complete environment for developing expert systems -- programs which are specifically intended to model human expertise or knowledge. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. CLIPS 6.0 provides a cohesive tool for handling a wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming allows knowledge to be represented as heuristics, or "rules-of-thumb" which specify a set of actions to be performed for a given situation. Object-oriented programming allows complex systems to be modeled as modular components (which can be easily reused to model other systems or create new components). The procedural programming capabilities provided by CLIPS 6.0 allow CLIPS to represent knowledge in ways similar to those allowed in languages such as C, Pascal, Ada, and LISP. Using CLIPS 6.0, one can develop expert system software using only rule-based programming, only object-oriented programming, only procedural programming, or combinations of the three. CLIPS provides extensive features to support the rule-based programming paradigm including seven conflict resolution strategies, dynamic rule priorities, and truth maintenance. CLIPS 6.0 supports more complex nesting of conditional elements in the if portion of a rule ("and", "or", and "not" conditional elements can be placed within a "not" conditional element). In addition, there is no longer a limitation on the number of multifield slots that a deftemplate can contain. The CLIPS Object-Oriented Language (COOL) provides object-oriented programming capabilities. Features supported by COOL include classes with multiple inheritance, abstraction, encapsulation, polymorphism, dynamic binding, and message passing with message-handlers. CLIPS 6.0 supports tight integration of the rule-based programming features of CLIPS with COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory and require an 80386 CPU or better. Users needing an 8086/8088 or 80286 executable must recompile the CLIPS source code themselves. Users who wish to recompile the DOS executable using Borland C++ or MicroSoft C must use a DOS extender program to produce an executable capable of using extended memory. The version of CLIPS 6.0 for IBM PC compatibles requires DOS v3.3 or later and/or Windows 3.1 or later. It is distributed on a set of three 1.4Mb 3.5 inch diskettes. A hard disk is required. The Macintosh version is distributed in compressed form on two 3.5 inch 1.4Mb Macintosh format diskettes, and requires System 6.0.5, or higher, and 1Mb RAM. The version for DEC VAX/VMS is available in VAX BACKUP format on a 1600 BPI 9-track magnetic tape (standard distribution medium) or a TK50 tape cartridge. The UNIX version is distributed in UNIX tar format on a .25 inch streaming magnetic tape cartridge (Sun QIC-24). For the UNIX version, alternate distribution media and formats are available upon request. The CLIPS 6.0 documentation includes a User's Guide and a three volume Reference Manual consisting of Basic and Advanced Programming Guides and an Interfaces Guide. An electronic version of the documentation is provided on the distribution medium for each version: in MicroSoft Word format for the Macintosh and PC versions of CLIPS, and in both PostScript format and MicroSoft Word for Macintosh format for the UNIX and DEC VAX versions of CLIPS. CLIPS was developed in 1986 and Version 6.0 was released in 1993.

CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (MACINTOSH VERSION)

NASA Technical Reports Server (NTRS)

Riley, G.

1994-01-01

CLIPS, the C Language Integrated Production System, is a complete environment for developing expert systems -- programs which are specifically intended to model human expertise or knowledge. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. CLIPS 6.0 provides a cohesive tool for handling a wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming allows knowledge to be represented as heuristics, or "rules-of-thumb" which specify a set of actions to be performed for a given situation. Object-oriented programming allows complex systems to be modeled as modular components (which can be easily reused to model other systems or create new components). The procedural programming capabilities provided by CLIPS 6.0 allow CLIPS to represent knowledge in ways similar to those allowed in languages such as C, Pascal, Ada, and LISP. Using CLIPS 6.0, one can develop expert system software using only rule-based programming, only object-oriented programming, only procedural programming, or combinations of the three. CLIPS provides extensive features to support the rule-based programming paradigm including seven conflict resolution strategies, dynamic rule priorities, and truth maintenance. CLIPS 6.0 supports more complex nesting of conditional elements in the if portion of a rule ("and", "or", and "not" conditional elements can be placed within a "not" conditional element). In addition, there is no longer a limitation on the number of multifield slots that a deftemplate can contain. The CLIPS Object-Oriented Language (COOL) provides object-oriented programming capabilities. Features supported by COOL include classes with multiple inheritance, abstraction, encapsulation, polymorphism, dynamic binding, and message passing with message-handlers. CLIPS 6.0 supports tight integration of the rule-based programming features of CLIPS with COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory and require an 80386 CPU or better. Users needing an 8086/8088 or 80286 executable must recompile the CLIPS source code themselves. Users who wish to recompile the DOS executable using Borland C++ or MicroSoft C must use a DOS extender program to produce an executable capable of using extended memory. The version of CLIPS 6.0 for IBM PC compatibles requires DOS v3.3 or later and/or Windows 3.1 or later. It is distributed on a set of three 1.4Mb 3.5 inch diskettes. A hard disk is required. The Macintosh version is distributed in compressed form on two 3.5 inch 1.4Mb Macintosh format diskettes, and requires System 6.0.5, or higher, and 1Mb RAM. The version for DEC VAX/VMS is available in VAX BACKUP format on a 1600 BPI 9-track magnetic tape (standard distribution medium) or a TK50 tape cartridge. The UNIX version is distributed in UNIX tar format on a .25 inch streaming magnetic tape cartridge (Sun QIC-24). For the UNIX version, alternate distribution media and formats are available upon request. The CLIPS 6.0 documentation includes a User's Guide and a three volume Reference Manual consisting of Basic and Advanced Programming Guides and an Interfaces Guide. An electronic version of the documentation is provided on the distribution medium for each version: in MicroSoft Word format for the Macintosh and PC versions of CLIPS, and in both PostScript format and MicroSoft Word for Macintosh format for the UNIX and DEC VAX versions of CLIPS. CLIPS was developed in 1986 and Version 6.0 was released in 1993.

CLIPS 6.0 - C LANGUAGE INTEGRATED PRODUCTION SYSTEM, VERSION 6.0 (DEC VAX VMS VERSION)

NASA Technical Reports Server (NTRS)

Donnell, B.

1994-01-01

CLIPS, the C Language Integrated Production System, is a complete environment for developing expert systems -- programs which are specifically intended to model human expertise or knowledge. It is designed to allow artificial intelligence research, development, and delivery on conventional computers. CLIPS 6.0 provides a cohesive tool for handling a wide variety of knowledge with support for three different programming paradigms: rule-based, object-oriented, and procedural. Rule-based programming allows knowledge to be represented as heuristics, or "rules-of-thumb" which specify a set of actions to be performed for a given situation. Object-oriented programming allows complex systems to be modeled as modular components (which can be easily reused to model other systems or create new components). The procedural programming capabilities provided by CLIPS 6.0 allow CLIPS to represent knowledge in ways similar to those allowed in languages such as C, Pascal, Ada, and LISP. Using CLIPS 6.0, one can develop expert system software using only rule-based programming, only object-oriented programming, only procedural programming, or combinations of the three. CLIPS provides extensive features to support the rule-based programming paradigm including seven conflict resolution strategies, dynamic rule priorities, and truth maintenance. CLIPS 6.0 supports more complex nesting of conditional elements in the if portion of a rule ("and", "or", and "not" conditional elements can be placed within a "not" conditional element). In addition, there is no longer a limitation on the number of multifield slots that a deftemplate can contain. The CLIPS Object-Oriented Language (COOL) provides object-oriented programming capabilities. Features supported by COOL include classes with multiple inheritance, abstraction, encapsulation, polymorphism, dynamic binding, and message passing with message-handlers. CLIPS 6.0 supports tight integration of the rule-based programming features of CLIPS with COOL (that is, a rule can pattern match on objects created using COOL). CLIPS 6.0 provides the capability to define functions, overloaded functions, and global variables interactively. In addition, CLIPS can be embedded within procedural code, called as a subroutine, and integrated with languages such as C, FORTRAN and Ada. CLIPS can be easily extended by a user through the use of several well-defined protocols. CLIPS provides several delivery options for programs including the ability to generate stand alone executables or to load programs from text or binary files. CLIPS 6.0 provides support for the modular development and execution of knowledge bases with the defmodule construct. CLIPS modules allow a set of constructs to be grouped together such that explicit control can be maintained over restricting the access of the constructs by other modules. This type of control is similar to global and local scoping used in languages such as C or Ada. By restricting access to deftemplate and defclass constructs, modules can function as blackboards, permitting only certain facts and instances to be seen by other modules. Modules are also used by rules to provide execution control. The CRSV (Cross-Reference, Style, and Verification) utility included with previous version of CLIPS is no longer supported. The capabilities provided by this tool are now available directly within CLIPS 6.0 to aid in the development, debugging, and verification of large rule bases. COSMIC offers four distribution versions of CLIPS 6.0: UNIX (MSC-22433), VMS (MSC-22434), MACINTOSH (MSC-22429), and IBM PC (MSC-22430). Executable files, source code, utilities, documentation, and examples are included on the program media. All distribution versions include identical source code for the command line version of CLIPS 6.0. This source code should compile on any platform with an ANSI C compiler. Each distribution version of CLIPS 6.0, except that for the Macintosh platform, includes an executable for the command line version. For the UNIX version of CLIPS 6.0, the command line interface has been successfully implemented on a Sun4 running SunOS, a DECstation running DEC RISC ULTRIX, an SGI Indigo Elan running IRIX, a DEC Alpha AXP running OSF/1, and an IBM RS/6000 running AIX. Command line interface executables are included for Sun4 computers running SunOS 4.1.1 or later and for the DEC RISC ULTRIX platform. The makefiles may have to be modified slightly to be used on other UNIX platforms. The UNIX, Macintosh, and IBM PC versions of CLIPS 6.0 each have a platform specific interface. Source code, a makefile, and an executable for the Windows 3.1 interface version of CLIPS 6.0 are provided only on the IBM PC distribution diskettes. Source code, a makefile, and an executable for the Macintosh interface version of CLIPS 6.0 are provided only on the Macintosh distribution diskettes. Likewise, for the UNIX version of CLIPS 6.0, only source code and a makefile for an X-Windows interface are provided. The X-Windows interface requires MIT's X Window System, Version 11, Release 4 (X11R4), the Athena Widget Set, and the Xmu library. The source code for the Athena Widget Set is provided on the distribution medium. The X-Windows interface has been successfully implemented on a Sun4 running SunOS 4.1.2 with the MIT distribution of X11R4 (not OpenWindows), an SGI Indigo Elan running IRIX 4.0.5, and a DEC Alpha AXP running OSF/1 1.2. The VAX version of CLIPS 6.0 comes only with the generic command line interface. ASCII makefiles for the command line version of CLIPS are provided on all the distribution media for UNIX, VMS, and DOS. Four executables are provided with the IBM PC version: a windowed interface executable for Windows 3.1 built using Borland C++ v3.1, an editor for use with the windowed interface, a command line version of CLIPS for Windows 3.1, and a 386 command line executable for DOS built using Zortech C++ v3.1. All four executables are capable of utilizing extended memory and require an 80386 CPU or better. Users needing an 8086/8088 or 80286 executable must recompile the CLIPS source code themselves. Users who wish to recompile the DOS executable using Borland C++ or MicroSoft C must use a DOS extender program to produce an executable capable of using extended memory. The version of CLIPS 6.0 for IBM PC compatibles requires DOS v3.3 or later and/or Windows 3.1 or later. It is distributed on a set of three 1.4Mb 3.5 inch diskettes. A hard disk is required. The Macintosh version is distributed in compressed form on two 3.5 inch 1.4Mb Macintosh format diskettes, and requires System 6.0.5, or higher, and 1Mb RAM. The version for DEC VAX/VMS is available in VAX BACKUP format on a 1600 BPI 9-track magnetic tape (standard distribution medium) or a TK50 tape cartridge. The UNIX version is distributed in UNIX tar format on a .25 inch streaming magnetic tape cartridge (Sun QIC-24). For the UNIX version, alternate distribution media and formats are available upon request. The CLIPS 6.0 documentation includes a User's Guide and a three volume Reference Manual consisting of Basic and Advanced Programming Guides and an Interfaces Guide. An electronic version of the documentation is provided on the distribution medium for each version: in MicroSoft Word format for the Macintosh and PC versions of CLIPS, and in both PostScript format and MicroSoft Word for Macintosh format for the UNIX and DEC VAX versions of CLIPS. CLIPS was developed in 1986 and Version 6.0 was released in 1993.

Evaluation of a Swedish version of the Strengthening Families Programme.

PubMed

Skärstrand, Eva; Sundell, Knut; Andréasson, Sven

2014-08-01

Adolescents' alcohol consumption is a public health concern in Sweden as well as in many other countries. Underage drinking is associated with increased risks of alcohol-related injuries, risky sexual behaviours and dependence later in life. Different strategies have been used in the effort to prevent this behaviour, and to postpone the onset of alcohol. The Strengthening Families Programme 10-14 (SFP 10-14) from the USA has been highlighted as one of the more effective prevention programmes. The aim of the present article was to evaluate the effectiveness of a culturally adapted Swedish version of the SFP 10-14. This was a cluster randomized controlled trial including 587 sixth-grade students (age 12) and their parents in 19 elementary schools in Stockholm. Schools were randomly assigned to either control (9 schools, 216 students) or to the family skills training intervention (10 schools, 371 students). The SFP Swedish version consisted of two parts with seven and five sessions, respectively, held separately for youths and parents except two joint family sessions. Measures of students' self-reported episodes of drunkenness, smoking, illicit drug use and other norm-breaking behaviours were collected at baseline (March 2003) and at three subsequent yearly surveys. Data were analysed using multilevel models with an intention-to-treat approach. No preventive effects were found for smoking, alcohol and illicit drug use and other norm-breaking behaviours, nor did moderators affect the outcome. The Swedish version of the SFP 10-14 was not effective in preventing youths' substance use in a Swedish context. © The Author 2013. Published by Oxford University Press on behalf of the European Public Health Association. All rights reserved.

Revised Simulation Model of the Control System, Displays, and Propulsion System for a ASTOVL Lift Fan Aircraft

NASA Technical Reports Server (NTRS)

Franklin, James A.

1997-01-01

This report describes revisions to a simulation model that was developed for use in piloted evaluations of takeoff, transition, hover, and landing characteristics of an advanced short takeoff and vertical landing lift fan fighter aircraft. These revisions have been made to the flight/propulsion control system, head-up display, and propulsion system to reflect recent flight and simulation experience with short takeoff and vertical landing operations. They include nonlinear inverse control laws in all axes (eliminating earlier versions with state rate feedback), throttle scaling laws for flightpath and thrust command, control selector commands apportioned based on relative effectiveness of the individual controls, lateral guidance algorithms that provide more flexibility for terminal area operations, and a simpler representation of the propulsion system. The model includes modes tailored to the phases of the aircraft's operation, with several response types which are coupled to the aircraft's aerodynamic and propulsion system effectors through a control selector tailored to the propulsion system. Head-up display modes for approach and hover are integrated with the corresponding control modes. Propulsion system components modeled include a remote lift fan and a lift-cruise engine. Their static performance and dynamic responses are represented by the model. A separate report describes the subsonic, power-off aerodynamics and jet induced aerodynamics in hover and forward flight, including ground effects.

Carbon-nitrogen interactions in idealized simulations with JSBACH (version 3.10)

NASA Astrophysics Data System (ADS)

Goll, Daniel S.; Winkler, Alexander J.; Raddatz, Thomas; Dong, Ning; Prentice, Ian Colin; Ciais, Philippe; Brovkin, Victor

2017-05-01

Recent advances in the representation of soil carbon decomposition and carbon-nitrogen interactions implemented previously into separate versions of the land surface scheme JSBACH are here combined in a single version, which is set to be used in the upcoming 6th phase of coupled model intercomparison project (CMIP6).Here we demonstrate that the new version of JSBACH is able to reproduce the spatial variability in the reactive nitrogen-loss pathways as derived from a compilation of δ15N data (R = 0. 76, root mean square error (RMSE) = 0. 2, Taylor score = 0. 83). The inclusion of carbon-nitrogen interactions leads to a moderate reduction (-10 %) of the carbon-concentration feedback (βL) and has a negligible effect on the sensitivity of the land carbon cycle to warming (γL) compared to the same version of the model without carbon-nitrogen interactions in idealized simulations (1 % increase in atmospheric carbon dioxide per year). In line with evidence from elevated carbon dioxide manipulation experiments, pronounced nitrogen scarcity is alleviated by (1) the accumulation of nitrogen due to enhanced nitrogen inputs by biological nitrogen fixation and reduced losses by leaching and volatilization. Warming stimulated turnover of organic nitrogen further counteracts scarcity.The strengths of the land carbon feedbacks of the recent version of JSBACH, with βL = 0. 61 Pg ppm-1 and γL = -27. 5 Pg °C-1, are 34 and 53 % less than the averages of CMIP5 models, although the CMIP5 version of JSBACH simulated βL and γL, which are 59 and 42 % higher than multi-model average. These changes are primarily due to the new decomposition model, indicating the importance of soil organic matter decomposition for land carbon feedbacks.

Calibrating and Updating the Global Forest Products Model (GFPM version 2014 with BPMPD)

Treesearch

Joseph Buongiorno; Shushuai Zhu

2014-01-01

The Global Forest Products Model (GFPM) is an economic model of global production, consumption, and trade of forest products. An earlier version of the model is described in Buongiorno et al. (2003). The GFPM 2014 has data and parameters to simulate changes of the forest sector from 2010 to 2030. Buongiorno and Zhu (2014) describe how to use the model for simulation....

Calibrating and updating the Global Forest Products Model (GFPM version 2016 with BPMPD)

Treesearch

Joseph Buongiorno; Shushuai  Zhu

2016-01-01

The Global Forest Products Model (GFPM) is an economic model of global production, consumption, and trade of forest products. An earlier version of the model is described in Buongiorno et al. (2003). The GFPM 2016 has data and parameters to simulate changes of the forest sector from 2013 to 2030. Buongiorno and Zhu (2015) describe how to use the model for...

Models for coupling of salt and water transport; Proximal tubular reabsorption in Necturus kidney.

PubMed

Sackin, H; Boulpaep, E L

1975-12-01

Models for coupling of salt and water transport are developed with two important assumptions appropriate for leaky epithelia. (a) The tight junction is permeable to both sale and water. (b) Active Na transport into the lateral speces is assumed to occur uniformly along the length of the channel. The proposed models deal specifically with the intraepithelial mechanism of proximal tubular resbsorption in the Necturus kidney although they have implications for epithelial transport in the gallbladder and small intestine as well. The first model (continuous version) is similar to the standing gradient model devised by Diamond and Bossert but used different boundary conditions. In contrast to Diamond and Bossert's model, the predicted concentration profiles are relatively flat with no sizable gradients along the interspace. The second model (compartment version) expands Curran's model of epithelial salt and water transport by including additional compartments and considering both electrical and chemical driving forces for individual Na and Cl ions as well as hydraulic and osmotic driving forces for water. In both models, ion and water fluxes are investigated as a function of the transport parameters. The behavior of the models is consistent with previously suggested mechanisms for the control of net transport, particularly during saline diuresis. Under all conditions the predicted ratio of net solute to solvent flux, or emergent concentration, deviates from exact isotonicity (except when the basement membrane has an appreciable salt reflection coefficient). However, the degree of hypertonicity may be small enough to be experimentally indistinguishable from isotonic transport.

MathWorks Simulink and C++ integration with the new VLT PLC-based standard development platform for instrument control systems

NASA Astrophysics Data System (ADS)

Kiekebusch, Mario J.; Di Lieto, Nicola; Sandrock, Stefan; Popovic, Dan; Chiozzi, Gianluca

2014-07-01

ESO is in the process of implementing a new development platform, based on PLCs, for upcoming VLT control systems (new instruments and refurbishing of existing systems to manage obsolescence issues). In this context, we have evaluated the integration and reuse of existing C++ libraries and Simulink models into the real-time environment of BECKHOFF Embedded PCs using the capabilities of the latest version of TwinCAT software and MathWorks Embedded Coder. While doing so the aim was to minimize the impact of the new platform by adopting fully tested solutions implemented in C++. This allows us to reuse the in house expertise, as well as extending the normal capabilities of the traditional PLC programming environments. We present the progress of this work and its application in two concrete cases: 1) field rotation compensation for instrument tracking devices like derotators, 2) the ESO standard axis controller (ESTAC), a generic model-based controller implemented in Simulink and used for the control of telescope main axes.

Building an Evaluation Framework for the VIC Model in the NLDAS Testbed

NASA Astrophysics Data System (ADS)

Xia, Y.; Mocko, D. M.; Wang, S.; Pan, M.; Kumar, S.; Peters-Lidard, C. D.; Wei, H.; Ek, M. B.

2017-12-01

Since the second phase of North American Land Data Assimilation System (NLDAS-2) was operationally implemented at NCEP in August 2014, developing the third phase of NLDAS system (NLDAS-3) has been a key task for the NCEP and NASA NLDAS team. The Variable Infiltration Capacity (VIC) model is one major component of the NLDAS system. The current operational NLDAS-2 uses version 4.0.3 (VIC403), research NLDAS-2 uses version 4.0.5 (VIC405), and LIS-based (Land Information System) NLDAS uses version 4.1.2 (VIC412). The purpose of this study is to compressively evaluate three versions and document changes in model behavior towards VIC412 for NLDAS-3. To do that, we develop a relatively comprehensive framework including multiple variables and metrics to assess the performance of different versions. This framework is being incorporated into the NASA Land Verification Toolkit (LVT) for evaluation of other LSMs for NLDAS-3 development. The evaluation results show that there are large and significant improvements for VIC412 in southeastern United States when compared with VIC403 and VIC405. In the other regions, there are very limited improvements or even some degree of deteriorations. Potential reasons are due to: (1) few USGS streamflow observations for soil and hydrologic parameter calibration, (2) the lack of re-calibration of VIC412 in the NLDAS domain, and (3) changes in model physics from VIC403 to VIC412. Overall, the model version upgrade largely/significantly enhances model performance and skill score for all United States except for the Great Plains, suggesting a right direction for VIC model development. Some further efforts are needed for science understanding of land surface physical processes in GP and a re-calibration for VIC412 using reasonable reference datasets is suggested.

[Cognitive mechanisms in risky decision-making in cannabis users].

PubMed

J R, Alameda-Bailén; M P, Salguero-Alcañiz; A, Merchán-Clavellino; S, Paíno-Quesada

2014-01-01

The relationship between the use of cannabis and the decision-making processes was explored. A computerized version of the Iowa Gambling Task (Cards Software) in its normal and reverse version was used, and the Prospect Valence Learning (PVL) model, which characterize the process of decision-making based on the parameters: Recency, Consistency, Loss aversion and Utility shape, was applied. Seventy-three cannabis consumers and a control group with 73 nonconsumers participated in the study. In the normal mode, subjects in the control group scored higher than cannabis consumers. Both groups showed consistent responses and aversion to loss. Nonconsumers showed greater influence of the gain-loss frequency, while consumers were more influenced by the magnitude of the gain-loss. The influence of immediate choices was higher among consumers who showed a quick oblivion while in the control group this process was more gradual. In the reverse mode, task performance was better among control group participants. Both groups showed consistency, loss aversion, more influenced by the magnitude of the gain-loss, and low influence of immediate elections. The results show the relationship between drug use and the decision-making processes, being consistent with the results obtained in other studies where consumers had worse results than control group. Moreover, the PVL parameters allow to adequately characterize decision-making. This confirms the relationship between drug use and decision-making by either the vulnerability prior to consumption or the neurotoxicity of drugs.

Industrial Waste Management Evaluation Model Version 3.1

EPA Pesticide Factsheets

IWEM is a screening level ground water model designed to simulate contaminant fate and transport. IWEM v3.1 is the latest version of the IWEM software, which includes additional tools to evaluate the beneficial use of industrial materials

Integrated Noise Model (INM) version 6.0 technical manual

DOT National Transportation Integrated Search

2002-01-31

The Federal Aviation Administration, Office of Environment and Energy (FAA, AEE-100) has : developed Version 6.0 of the Integrated Noise Model (INM) with support from the John A. Volpe : National Transportation Systems Center, Acoustics Facility (Vol...

FHWA traffic noise model, version 1.0 : user's guide

DOT National Transportation Integrated Search

1998-01-01

This User's Guide is for the Federal Highway Administration's Traffic Noise Model (FHWA TNM), Version 1.0 -- the FHWAs computer program for highway traffic noise prediction and analysis. Two companion reports, a Technical Manual and a data repor...

Integrated noise model (INM) version 7.0 technical manual

DOT National Transportation Integrated Search

2008-01-31

The Federal Aviation Administration, Office of Environment and Energy (FAA, AEE-100) has developed Version 7.0 of the Integrated Noise Model (INM) with support from the John A. Volpe National Transportation Systems Center, Acoustics Facility (Volpe C...

FHWA Traffic Noise Model, version 1.0 technical manual

DOT National Transportation Integrated Search

1998-02-01

This Technical Manual is for the Federal Highway Administrations Traffic Noise Model (FHWA TNM), Version 1.0 -- the FHWAs computer program for highway traffic noise prediction and analysis. Two companion reports, a Users Guide and a data r...

Integrated noise model (INM) version 7.0 user's guide

DOT National Transportation Integrated Search

2007-04-01

The Federal Aviation Administration, Office of Environment and Energy, Noise Division (AEE-100) has developed Version 7.0 of the Integrated Noise Model (INM) with support from the ATAC Corporation and the Department of Transportation Volpe National T...

Integrated Noise Model (INM), version 5.1 : technical manual

DOT National Transportation Integrated Search

1997-12-01

The Federal Aviation Administration, Office of Environment and Energy (FAA, AEE-120) : has developed Version 5.1 of the Integrated Noise Model (INM) with support from the : John A. Volpe National Transportation Systems Center, Acoustics Facility (Vol...

Abstract probabilistic CNOT gate model based on double encoding: study of the errors and physical realizability

NASA Astrophysics Data System (ADS)

Gueddana, Amor; Attia, Moez; Chatta, Rihab

2015-03-01

In this work, we study the error sources standing behind the non-perfect linear optical quantum components composing a non-deterministic quantum CNOT gate model, which performs the CNOT function with a success probability of 4/27 and uses a double encoding technique to represent photonic qubits at the control and the target. We generalize this model to an abstract probabilistic CNOT version and determine the realizability limits depending on a realistic range of the errors. Finally, we discuss physical constraints allowing the implementation of the Asymmetric Partially Polarizing Beam Splitter (APPBS), which is at the heart of correctly realizing the CNOT function.

Neutral naturalness from the brother-Higgs model

NASA Astrophysics Data System (ADS)

Serra, Javi; Torre, Riccardo

2018-02-01

We present a version of the twin Higgs mechanism with minimal symmetry structure and particle content. The model is built upon a composite Higgs theory with global S O (6 )/S O (5 ) symmetry breaking. The leading contribution to the Higgs potential, from the top sector, is solely canceled via the introduction of a standard model neutral top partner. We show that the inherent Z2 breaking of this construction is under control and of the right size to achieve electroweak symmetry breaking, with a fine-tuning at the level of 5%-10%, compatibly with the observed Higgs mass. We briefly discuss the particular phenomenological features of this scenario.

Design of a Neurally Plausible Model of Fear Learning

PubMed Central

Krasne, Franklin B.; Fanselow, Michael S.; Zelikowsky, Moriel

2011-01-01

A neurally oriented conceptual and computational model of fear conditioning manifested by freezing behavior (FRAT), which accounts for many aspects of delay and context conditioning, has been constructed. Conditioning and extinction are the result of neuromodulation-controlled LTP at synapses of thalamic, cortical, and hippocampal afferents on principal cells and inhibitory interneurons of lateral and basal amygdala. The phenomena accounted for by the model (and simulated by the computational version) include conditioning, secondary reinforcement, blocking, the immediate shock deficit, extinction, renewal, and a range of empirically valid effects of pre- and post-training ablation or inactivation of hippocampus or amygdala nuclei. PMID:21845175

The Affective and Emotional Composite Temperament (AFECT) model and scale: a system-based integrative approach.

PubMed

Lara, Diogo R; Bisol, Luisa W; Brunstein, Miriam G; Reppold, Caroline T; de Carvalho, Hudson W; Ottoni, Gustavo L

2012-09-01

Based on many temperament frameworks, here we propose an integration of emotional and affective temperaments (the AFECT model), forming a common substrate for mood, behavior, personality and part of cognition. Temperament is conceived as a self-regulated system with six emotional dimensions: volition, anger, inhibition, sensitivity, coping and control. The different combinations of these emotional dimensions result in 12 affective temperament types, namely depressive, anxious, apathetic, obsessive, cyclothymic, dysphoric, irritable, volatile, disinhibited, hyperthymic and euphoric. We also developed and validated a self-report scale to evaluate this construct, the Affective and Emotional Composite Temperament Scale (AFECTS). Exploratory and confirmatory psychometric analyses were performed with the internet version of the AFECTS in 2947 subjects (72% females, 35±11years old). The factors interpreted as volition, anger, inhibition, sensitivity, coping and control showed very good Cronbach's alphas for 5 dimensions (0.87-0.90) and acceptable alpha for inhibition (0.75). Confirmatory factor analysis corroborated this 6-factor structure when considering inhibition as a second-order factor with fear and caution as first-order factors (SRMR=0.061; RMSEA=0.053). In the Affective section, all 12 categorical affective temperaments were selected in the categorical choice, with 99% of volunteers identifying at least one adequate description of their affective temperament. Only the internet version was used in a general population sample. The AFECT model provides an integrated framework of temperament as a self-regulated system, with implications for mental health, psychiatric disorders and their treatment. The AFECTS showed good psychometric properties to further study this model. Copyright © 2011 Elsevier B.V. All rights reserved.

STEPS: Modeling and Simulating Complex Reaction-Diffusion Systems with Python

PubMed Central

Wils, Stefan; Schutter, Erik De

2008-01-01

We describe how the use of the Python language improved the user interface of the program STEPS. STEPS is a simulation platform for modeling and stochastic simulation of coupled reaction-diffusion systems with complex 3-dimensional boundary conditions. Setting up such models is a complicated process that consists of many phases. Initial versions of STEPS relied on a static input format that did not cleanly separate these phases, limiting modelers in how they could control the simulation and becoming increasingly complex as new features and new simulation algorithms were added. We solved all of these problems by tightly integrating STEPS with Python, using SWIG to expose our existing simulation code. PMID:19623245

A model for the evolution of CO2 on Mars

NASA Technical Reports Server (NTRS)

Haberle, Robert M.; Tyler, D.; Mckay, C. P.; Davis, W. L.

1993-01-01

Our MSATT work has focused on the evolution of CO2 on Mars. We have constructed a model that predicts the evolution of CO2 on Mars from a specified initial amount at the end of the heavy bombardment to the present. The model draws on published estimates of the main process believed to affect the fate of CO2 during this period: chemical weathering, regolith uptake, polar cap formation, and atmospheric escape. Except for escape, the rate at which these processes act is controlled by surface temperatures that we calculate using a modified version of the Gierasch and Toon energy balance model. Various aspects of this work are covered.

Dynamic partial reconfiguration of logic controllers implemented in FPGAs

NASA Astrophysics Data System (ADS)

Bazydło, Grzegorz; Wiśniewski, Remigiusz

2016-09-01

Technological progress in recent years benefits in digital circuits containing millions of logic gates with the capability for reprogramming and reconfiguring. On the one hand it provides the unprecedented computational power, but on the other hand the modelled systems are becoming increasingly complex, hierarchical and concurrent. Therefore, abstract modelling supported by the Computer Aided Design tools becomes a very important task. Even the higher consumption of the basic electronic components seems to be acceptable because chip manufacturing costs tend to fall over the time. The paper presents a modelling approach for logic controllers with the use of Unified Modelling Language (UML). Thanks to the Model Driven Development approach, starting with a UML state machine model, through the construction of an intermediate Hierarchical Concurrent Finite State Machine model, a collection of Verilog files is created. The system description generated in hardware description language can be synthesized and implemented in reconfigurable devices, such as FPGAs. Modular specification of the prototyped controller permits for further dynamic partial reconfiguration of the prototyped system. The idea bases on the exchanging of the functionality of the already implemented controller without stopping of the FPGA device. It means, that a part (for example a single module) of the logic controller is replaced by other version (called context), while the rest of the system is still running. The method is illustrated by a practical example by an exemplary Home Area Network system.

SeaWiFS technical report series. Volume 15: The simulated SesWiFS data set, version 2

NASA Technical Reports Server (NTRS)

Hooker, Stanford B. (Editor); Firestone, Elaine R. (Editor); Gregg, Watson W.; Patt, Frederick S.; Woodward, Robert H.

1994-01-01

This document describes the second version of the simulated SeaWiFS data set. A realistic simulated data set is essential for mission readiness preparations and can potentially assist in all phases of ground support for a future mission. The second version improves on the first version primarily through additional realism and complexity. This version incorporates a representation of virtually every aspect of the flight mission. Thus, it provides a high-fidelity data set for testing several aspects of the ground system, including data acquisition, data processing, data transfers, calibration and validation, quality control, and mission operations. The data set is constructed for a seven-day period, 25-31 March 1994. Specific features of the data set include Global Area coverage (GAC), recorded Local Area Coverage (LAC), and realtime High Resolution Picture Transmission (HRPT) data for the seven-day period. A realistic orbit, which is propagated using a Brouwer-Lyddane model with drag, is used to simulate orbit positions. The simulated data corresponds to the command schedule based on the orbit for this seven-day period. It includes total (at-satellite) radiances not only for ocean, but for land, clouds, and ice. The simulation also utilizes a high-resolution land-sea mask. It includes the April 1993 SeaWiFS spectral responses and sensor saturation responses. The simulation is formatted according to July 1993 onboard data structures, which include corresponding telemetry (instrument and spacecraft) data. The methods are described and some examples of the output are given. The instrument response functions made available in April 1993 have been used to produce the Version 2 simulated data. These response functions will change as part of the sensor improvements initiated in July-August 1993.

Interactive Computer-Supported Learning in Mathematics: A Comparison of Three Learning Programs on Trigonometry

ERIC Educational Resources Information Center

Sander, Elisabeth; Heiß, Andrea

2014-01-01

Three different versions of a learning program on trigonometry were compared, a program controlled, non-interactive version (CG), an interactive, conflict inducing version (EG 1), and an interactive one which was supposed to reduce the occurrence of a cognitive conflict regarding the central problem solution (EG 2). Pupils (N = 101) of a…

User's guide to Version 2 of the Regeneration Establishment Model: Part of the Prognosis Model

Treesearch

Dennis E. Ferguson; Nicholas L. Crookston

1991-01-01

This publication describes how to use version 2 of the Regeneration Establishment Model, a computer-based simulator that is part of the Prognosis Model for Stand Development. Conifer regeneration is predicted following harvest and site preparation for forests in western Montana, central Idaho, and northern Idaho. The influence of western spruce budworm (Choristoneura...

Simulating historical landscape dynamics using the landscape fire succession model LANDSUM version 4.0

Treesearch

Robert E. Keane; Lisa M. Holsinger; Sarah D. Pratt

2006-01-01

The range and variation of historical landscape dynamics could provide a useful reference for designing fuel treatments on today's landscapes. Simulation modeling is a vehicle that can be used to estimate the range of conditions experienced on historical landscapes. A landscape fire succession model called LANDSUMv4 (LANDscape SUccession Model version 4.0) is...

The path to CAM6: coupled simulations with CAM5.4 and CAM5.5

NASA Astrophysics Data System (ADS)

Bogenschutz, Peter A.; Gettelman, Andrew; Hannay, Cecile; Larson, Vincent E.; Neale, Richard B.; Craig, Cheryl; Chen, Chih-Chieh

2018-01-01

This paper documents coupled simulations of two developmental versions of the Community Atmosphere Model (CAM) towards CAM6. The configuration called CAM5.4 introduces new microphysics, aerosol, and ice nucleation changes, among others to CAM. The CAM5.5 configuration represents a more radical departure, as it uses an assumed probability density function (PDF)-based unified cloud parameterization to replace the turbulence, shallow convection, and warm cloud macrophysics in CAM. This assumed PDF method has been widely used in the last decade in atmosphere-only climate simulations but has never been documented in coupled mode. Here, we compare the simulated coupled climates of CAM5.4 and CAM5.5 and compare them to the control coupled simulation produced by CAM5.3. We find that CAM5.5 has lower cloud forcing biases when compared to the control simulations. Improvements are also seen in the simulated amplitude of the Niño-3.4 index, an improved representation of the diurnal cycle of precipitation, subtropical surface wind stresses, and double Intertropical Convergence Zone biases. Degradations are seen in Amazon precipitation as well as slightly colder sea surface temperatures and thinner Arctic sea ice. Simulation of the 20th century results in a credible simulation that ends slightly colder than the control coupled simulation. The authors find this is due to aerosol indirect effects that are slightly stronger in the new version of the model and propose a solution to ameliorate this. Overall, in these early coupled simulations, CAM5.5 produces a credible climate that is appropriate for science applications and is ready for integration into the National Center for Atmospheric Research's (NCAR's) next-generation climate model.

Paper and Slides on Draft Nonroad Emission Inventory Model: Presented at 12th International Emission Inventory Conference, April 2003

EPA Pesticide Factsheets

Description of the most current draft of the NONROAD model and how it version differs from prior versions. Nationwide model outputs are presented and compared for HC, CO, NOx, PM, SOx (SO2), and fuel consumption, for diesel and for sparkignition engines.

TESTING U.S. EPA'S ISCST -VERSION 3 MODEL ON DIOXINS: A COMPARISON OF PREDICTED AND OBSERVED AIR AND SOIL CONCENTRATIONS

EPA Science Inventory

The central purpose of our study was to examine the performance of the United States Environmental Protection Agency's (EPA) nonreactive Gaussian air quality dispersion model, the Industrial Source Complex Short Term Model (ISCST3) Version 98226, in predicting polychlorinated dib...

Updates to the Demographic and Spatial Allocation Models to Produce Integrated Climate and Land Use Scenarios (ICLUS) (Final Report, Version 2)

EPA Science Inventory

EPA's announced the availability of the final report, Updates to the Demographic and Spatial Allocation Models to Produce Integrated Climate and Land Use Scenarios (ICLUS) (Version 2). This update furthered land change modeling by providing nationwide housing developmen...

IMPLEMENTATION OF THE SMOKE EMISSION DATA PROCESSOR AND SMOKE TOOL INPUT DATA PROCESSOR IN MODELS-3

EPA Science Inventory

The U.S. Environmental Protection Agency has implemented Version 1.3 of SMOKE (Sparse Matrix Object Kernel Emission) processor for preparation of area, mobile, point, and biogenic sources emission data within Version 4.1 of the Models-3 air quality modeling framework. The SMOK...

How to use the Stand-Damage Model: Version 2.0. (Computer program)

Treesearch

J.J. Colbert; George Racin

2001-01-01

The Stand-Damage Model simulates the growth of a forest stand, a spatially homogeneous collection of trees growing on a site. The model simulates growth from an initial inventory, user-prescribed management practices, and the effects of gypsy moth defoliation. Here we provide installation and operating instructions for Version 2.0.

Estimating postfire water production in the Pacific Northwest

Treesearch

Donald F. Potts; David L. Peterson; Hans R. Zuuring

1989-01-01

Two hydrologic models were adapted to estimate postfire changer in water yield in Pacific Northwest watersheds. The WRENSS version of the simulation model PROSPER is used for hydrologic regimes dominated by rainfall: it calculates water available for streamflow onthe basis of seasonal precipitation and leaf area index. The WRENSS version of the simulation model WATBAL...

Sequence-sensitive exemplar and decision-bound accounts of speeded-classification performance in a modified Garner-tasks paradigm.

PubMed

Little, Daniel R; Wang, Tony; Nosofsky, Robert M

2016-09-01

Among the most fundamental results in the area of perceptual classification are the "correlated facilitation" and "filtering interference" effects observed in Garner's (1974) speeded categorization tasks: In the case of integral-dimension stimuli, relative to a control task, single-dimension classification is faster when there is correlated variation along a second dimension, but slower when there is orthogonal variation that cannot be filtered out (e.g., by attention). These fundamental effects may result from participants' use of a trial-by-trial bypass strategy in the control and correlated tasks: The observer changes the previous category response whenever the stimulus changes, and maintains responses if the stimulus repeats. Here we conduct modified versions of the Garner tasks that eliminate the availability of a pure bypass strategy. The fundamental facilitation and interference effects remain, but are still largely explainable in terms of pronounced sequential effects in all tasks. We develop sequence-sensitive versions of exemplar-retrieval and decision-bound models aimed at capturing the detailed, trial-by-trial response-time distribution data. The models combine assumptions involving: (i) strengthened perceptual/memory representations of stimuli that repeat across consecutive trials, and (ii) a bias to change category responses on trials in which the stimulus changes. These models can predict our observed effects and provide a more complete account of the underlying bases of performance in our modified Garner tasks. Copyright © 2016 Elsevier Inc. All rights reserved.

Generalized environmental control and life support system computer program (G189A) configuration control, phase 2

NASA Technical Reports Server (NTRS)

Mcenulty, R. E.

1977-01-01

The G189A simulation of the Shuttle Orbiter ECLSS was upgraded. All simulation library versions and simulation models were converted from the EXEC2 to the EXEC8 computer system and a new program, G189PL, was added to the combination master program library. The program permits the post-plotting of up to 100 frames of plot data over any time interval of a G189 simulation run. The overlay structure of the G189A simulations were restructured for the purpose of conserving computer core requirements and minimizing run time requirements.

Generalized Background Error covariance matrix model (GEN_BE v2.0)

NASA Astrophysics Data System (ADS)

Descombes, G.; Auligné, T.; Vandenberghe, F.; Barker, D. M.

2014-07-01

The specification of state background error statistics is a key component of data assimilation since it affects the impact observations will have on the analysis. In the variational data assimilation approach, applied in geophysical sciences, the dimensions of the background error covariance matrix (B) are usually too large to be explicitly determined and B needs to be modeled. Recent efforts to include new variables in the analysis such as cloud parameters and chemical species have required the development of the code to GENerate the Background Errors (GEN_BE) version 2.0 for the Weather Research and Forecasting (WRF) community model to allow for a simpler, flexible, robust, and community-oriented framework that gathers methods used by meteorological operational centers and researchers. We present the advantages of this new design for the data assimilation community by performing benchmarks and showing some of the new features on data assimilation test cases. As data assimilation for clouds remains a challenge, we present a multivariate approach that includes hydrometeors in the control variables and new correlated errors. In addition, the GEN_BE v2.0 code is employed to diagnose error parameter statistics for chemical species, which shows that it is a tool flexible enough to involve new control variables. While the generation of the background errors statistics code has been first developed for atmospheric research, the new version (GEN_BE v2.0) can be easily extended to other domains of science and be chosen as a testbed for diagnostic and new modeling of B. Initially developed for variational data assimilation, the model of the B matrix may be useful for variational ensemble hybrid methods as well.

Space Environments and Effects: Trapped Proton Model

NASA Technical Reports Server (NTRS)

Huston, S. L.; Kauffman, W. (Technical Monitor)

2002-01-01

An improved model of the Earth's trapped proton environment has been developed. This model, designated Trapped Proton Model version 1 (TPM-1), determines the omnidirectional flux of protons with energy between 1 and 100 MeV throughout near-Earth space. The model also incorporates a true solar cycle dependence. The model consists of several data files and computer software to read them. There are three versions of the mo'del: a FORTRAN-Callable library, a stand-alone model, and a Web-based model.

FHWA Traffic Noise Model user's guide (version 2.0 addendum).

DOT National Transportation Integrated Search

2002-03-01

In March 1998, the Federal Highway Administration (FHWA) Office of Natural : Environment, released the FHWA Traffic Noise Model (FHWA TNM) Version 1.0, a : state-of-the-art computer program for highway traffic noise prediction and : analysis. Since t...

Integrated Noise Model (INM) version 5.0 user's guide

DOT National Transportation Integrated Search

1995-08-01

The Federal Aviation Administration, Office of Environment and Energy (AEE-120) has : developed Version 5.0 of the Integrated Noise Model (INM) with support from the ATAC : Corporation, the U.S. Department of Transportation John A. Volpe National : T...

HNM, heliport noise model : version 2.2 user's guide

DOT National Transportation Integrated Search

1994-02-01

The John A. Volpe National Transportation Systems Center (Volpe Center), in support of : the Federal Aviation Administration, Office of Environment and Energy, has developed : Version 2.2 of the Heliport Noise Model (HNM). The HNM is a computer progr...

Visual Attention Allocation Between Robotic Arm and Environmental Process Control: Validating the STOM Task Switching Model

NASA Technical Reports Server (NTRS)

Wickens, Christopher; Vieanne, Alex; Clegg, Benjamin; Sebok, Angelia; Janes, Jessica

2015-01-01

Fifty six participants time shared a spacecraft environmental control system task with a realistic space robotic arm control task in either a manual or highly automated version. The former could suffer minor failures, whose diagnosis and repair were supported by a decision aid. At the end of the experiment this decision aid unexpectedly failed. We measured visual attention allocation and switching between the two tasks, in each of the eight conditions formed by manual-automated arm X expected-unexpected failure X monitoring- failure management. We also used our multi-attribute task switching model, based on task attributes of priority interest, difficulty and salience that were self-rated by participants, to predict allocation. An un-weighted model based on attributes of difficulty, interest and salience accounted for 96 percent of the task allocation variance across the 8 different conditions. Task difficulty served as an attractor, with more difficult tasks increasing the tendency to stay on task.

Further Examination of the Vibratory Loads Reduction Results from the NASA/ARMY/MIT Active Twist Rotor Test

NASA Technical Reports Server (NTRS)

Wilbur, Matthew L.; Yeager, William T., Jr.; Sekula, Martin K.

2002-01-01

The vibration reduction capabilities of a model rotor system utilizing controlled, strain-induced blade twisting are examined. The model rotor blades, which utilize piezoelectric active fiber composite actuators, were tested in the NASA Langley Transonic Dynamics Tunnel using open-loop control to determine the effect of active-twist on rotor vibratory loads. The results of this testing have been encouraging, and have demonstrated that active-twist rotor designs offer the potential for significant load reductions in future helicopter rotor systems. Active twist control was found to use less than 1% of the power necessary to operate the rotor system and had a pronounced effect on both rotating- and fixed-system loads, offering reductions in individual harmonic loads of up to 100%. A review of the vibration reduction results obtained is presented, which includes a limited set of comparisons with results generated using the second-generation version of the Comprehensive Analytical Model of Rotorcraft Aerodynamics and Dynamics (CAMRAD II) rotorcraft comprehensive analysis.

Implementation of Advanced Two Equation Turbulence Models in the USM3D Unstructured Flow Solver

NASA Technical Reports Server (NTRS)

Wang, Qun-Zhen; Massey, Steven J.; Abdol-Hamid, Khaled S.

2000-01-01

USM3D is a widely-used unstructured flow solver for simulating inviscid and viscous flows over complex geometries. The current version (version 5.0) of USM3D, however, does not have advanced turbulence models to accurately simulate complicated flow. We have implemented two modified versions of the original Jones and Launder k-epsilon "two-equation" turbulence model and the Girimaji algebraic Reynolds stress model in USM3D. Tests have been conducted for three flat plate boundary layer cases, a RAE2822 airfoil and an ONERA M6 wing. The results are compared with those from direct numerical simulation, empirical formulae, theoretical results, and the existing Spalart-Allmaras one-equation model.

Approaches in highly parameterized inversion—PEST++ Version 3, a Parameter ESTimation and uncertainty analysis software suite optimized for large environmental models

USGS Publications Warehouse

Welter, David E.; White, Jeremy T.; Hunt, Randall J.; Doherty, John E.

2015-09-18

The PEST++ Version 3 software suite can be compiled for Microsoft Windows®4 and Linux®5 operating systems; the source code is available in a Microsoft Visual Studio®6 2013 solution; Linux Makefiles are also provided. PEST++ Version 3 continues to build a foundation for an open-source framework capable of producing robust and efficient parameter estimation tools for large environmental models.

An implicit dispersive transport algorithm for the US Geological Survey MOC3D solute-transport model

USGS Publications Warehouse

Kipp, K.L.; Konikow, Leonard F.; Hornberger, G.Z.

1998-01-01

This report documents an extension to the U.S. Geological Survey MOC3D transport model that incorporates an implicit-in-time difference approximation for the dispersive transport equation, including source/sink terms. The original MOC3D transport model (Version 1) uses the method of characteristics to solve the transport equation on the basis of the velocity field. The original MOC3D solution algorithm incorporates particle tracking to represent advective processes and an explicit finite-difference formulation to calculate dispersive fluxes. The new implicit procedure eliminates several stability criteria required for the previous explicit formulation. This allows much larger transport time increments to be used in dispersion-dominated problems. The decoupling of advective and dispersive transport in MOC3D, however, is unchanged. With the implicit extension, the MOC3D model is upgraded to Version 2. A description of the numerical method of the implicit dispersion calculation, the data-input requirements and output options, and the results of simulator testing and evaluation are presented. Version 2 of MOC3D was evaluated for the same set of problems used for verification of Version 1. These test results indicate that the implicit calculation of Version 2 matches the accuracy of Version 1, yet is more efficient than the explicit calculation for transport problems that are characterized by a grid Peclet number less than about 1.0.

Assessing the Tangent Linear Behaviour of Common Tracer Transport Schemes and Their Use in a Linearised Atmospheric General Circulation Model

NASA Technical Reports Server (NTRS)

Holdaway, Daniel; Kent, James

2015-01-01

The linearity of a selection of common advection schemes is tested and examined with a view to their use in the tangent linear and adjoint versions of an atmospheric general circulation model. The schemes are tested within a simple offline one-dimensional periodic domain as well as using a simplified and complete configuration of the linearised version of NASA's Goddard Earth Observing System version 5 (GEOS-5). All schemes which prevent the development of negative values and preserve the shape of the solution are confirmed to have nonlinear behaviour. The piecewise parabolic method (PPM) with certain flux limiters, including that used by default in GEOS-5, is found to support linear growth near the shocks. This property can cause the rapid development of unrealistically large perturbations within the tangent linear and adjoint models. It is shown that these schemes with flux limiters should not be used within the linearised version of a transport scheme. The results from tests using GEOS-5 show that the current default scheme (a version of PPM) is not suitable for the tangent linear and adjoint model, and that using a linear third-order scheme for the linearised model produces better behaviour. Using the third-order scheme for the linearised model improves the correlations between the linear and non-linear perturbation trajectories for cloud liquid water and cloud liquid ice in GEOS-5.

Proposal of a short-form version of the Brazilian Food Insecurity Scale

PubMed Central

dos Santos, Leonardo Pozza; Lindemann, Ivana Loraine; Motta, Janaína Vieira dos Santos; Mintem, Gicele; Bender, Eliana; Gigante, Denise Petrucci

2014-01-01

OBJECTIVE To propose a short version of the Brazilian Food Insecurity Scale. METHODS Two samples were used to test the results obtained in the analyses in two distinct scenarios. One of the studies was composed of 230 low income families from Pelotas, RS, Southern Brazil, and the other was composed of 15,575 women, whose data were obtained from the 2006 National Survey on Demography and Health. Two models were tested, the first containing seven questions, and the second, the five questions that were considered the most relevant ones in the concordance analysis. The models were compared to the Brazilian Food Insecurity Scale, and the sensitivity, specificity and accuracy parameters were calculated, as well as the kappa agreement test. RESULTS Comparing the prevalence of food insecurity between the Brazilian Food Insecurity Scale and the two models, the differences were around 2 percentage points. In the sensitivity analysis, the short version of seven questions obtained 97.8% and 99.5% in the Pelotas sample and in the National Survey on Demography and Health sample, respectively, while specificity was 100% in both studies. The five-question model showed similar results (sensitivity of 95.7% and 99.5% in the Pelotas sample and in the National Survey on Demography and Health sample, respectively). In the Pelotas sample, the kappa test of the seven-question version totaled 97.0% and that of the five-question version, 95.0%. In the National Survey on Demography and Health sample, the two models presented a 99.0% kappa. CONCLUSIONS We suggest that the model with five questions should be used as the short version of the Brazilian Food Insecurity Scale, as its results were similar to the original scale with a lower number of questions. This version needs to be administered to other populations in Brazil in order to allow for the adequate assessment of the validity parameters. PMID:25372169

Performance of a reconfigured atmospheric general circulation model at low resolution

NASA Astrophysics Data System (ADS)

Wen, Xinyu; Zhou, Tianjun; Wang, Shaowu; Wang, Bin; Wan, Hui; Li, Jian

2007-07-01

Paleoclimate simulations usually require model runs over a very long time. The fast integration version of a state-of-the-art general circulation model (GCM), which shares the same physical and dynamical processes but with reduced horizontal resolution and increased time step, is usually developed. In this study, we configure a fast version of an atmospheric GCM (AGCM), the Grid Atmospheric Model of IAP/LASG (Institute of Atmospheric Physics/State Key Laboratory of Numerical Modeling for Atmospheric Sciences and Geophysical Fluid Dynamics), at low resolution (GAMIL-L, hereafter), and compare the simulation results with the NCEP/NCAR reanalysis and other data to examine its performance. GAMIL-L, which is derived from the original GAMIL, is a finite difference AGCM with 72×40 grids in longitude and latitude and 26 vertical levels. To validate the simulated climatology and variability, two runs were achieved. One was a 60-year control run with fixed climatological monthly sea surface temperature (SST) forcing, and the other was a 50-yr (1950 2000) integration with observational time-varying monthly SST forcing. Comparisons between these two cases and the reanalysis, including intra-seasonal and inter-annual variability are also presented. In addition, the differences between GAMIL-L and the original version of GAMIL are also investigated. The results show that GAMIL-L can capture most of the large-scale dynamical features of the atmosphere, especially in the tropics and mid latitudes, although a few deficiencies exist, such as the underestimated Hadley cell and thereby the weak strength of the Asia summer monsoon. However, the simulated mean states over high latitudes, especially over the polar regions, are not acceptable. Apart from dynamics, the thermodynamic features mainly depend upon the physical parameterization schemes. Since the physical package of GAMIL-L is exactly the same as the original high-resolution version of GAMIL, in which the NCAR Community Atmosphere Model (CAM2) physical package was used, there are only small differences between them in the precipitation and temperature fields. Because our goal is to develop a fast-running AGCM and employ it in the coupled climate system model of IAP/LASG for paleoclimate studies such as ENSO and Australia-Asia monsoon, particular attention has been paid to the model performances in the tropics. More model validations, such as those ran for the Southern Oscillation and South Asia monsoon, indicate that GAMIL-L is reasonably competent and valuable in this regard.

Thermosphere-Ionosphere-Mesosphere Modeling Using the TIME-GCM

DTIC Science & Technology

2014-09-30

respectively. The CCM3 is the NCAR Community Climate Model, Version 3.6, a GCM of the troposphere and stratosphere. All models include self-consistent...middle atmosphere version of the NCAR Community Climate Model, (2) the NCAR TIME-GCM, and (3) the Model for Ozone and Related Chemical Tracers (MOZART... troposphere , but the impacts of such events extend well into the mesosphere. The coupled NCAR thermosphere-ionosphere-mesosphere- electrodynamics general

Moxibustion for breech version: a randomized controlled trial.

PubMed

Guittier, Marie-Julia; Pichon, Michelle; Dong, Hongguang; Irion, Olivier; Boulvain, Michel

2009-11-01

To estimate the efficacy of moxibustion between 34 and 38 weeks of gestation to facilitate the cephalic version of fetuses in breech presentation and the acceptability of this method by women. We conducted a randomized controlled trial in a Swiss university hospital maternity unit. We proposed to stimulate the acupoint BL 67 by moxibustion daily for 2 weeks for 212 consenting women between 34 and 36 weeks of gestation with a single fetus in breech presentation. We did the intervention three times weekly in the hospital and a teaching session and information leaflet on the technique for additional daily therapy at home. The control group received expectant management care. The availability of external cephalic version was maintained for both groups. The main outcome measure was the comparison of the proportion of women with cephalic presentation at delivery. Baseline characteristics were similar between groups, except more nulliparous women were randomized to moxibustion. The percentage of versions was similar between groups: 18% in the moxibustion group compared with 16% in the control group (relative risk 1.12, 95% confidence interval 0.62 to 2.03). Adjustment for the imbalance in parity did not change these results. The frequency of cesarean delivery was similar (64% compared with 58% in the moxibustion group and the control group, respectively). Acceptability of the intervention and women's perceptions of moxibustion were favorable. We observed no beneficial effect of moxibustion to facilitate the cephalic version of fetuses in breech presentation. Despite this lack of proven effectiveness, women had positive opinions on the intervention. ClinicalTrials.gov, www.clinicaltrials.gov,NCT00890474. I.

Development of an hp-version finite element method for computational optimal control

NASA Technical Reports Server (NTRS)

Hodges, Dewey H.; Warner, Michael S.

1993-01-01

The purpose of this research effort was to begin the study of the application of hp-version finite elements to the numerical solution of optimal control problems. Under NAG-939, the hybrid MACSYMA/FORTRAN code GENCODE was developed which utilized h-version finite elements to successfully approximate solutions to a wide class of optimal control problems. In that code the means for improvement of the solution was the refinement of the time-discretization mesh. With the extension to hp-version finite elements, the degrees of freedom include both nodal values and extra interior values associated with the unknown states, co-states, and controls, the number of which depends on the order of the shape functions in each element. One possible drawback is the increased computational effort within each element required in implementing hp-version finite elements. We are trying to determine whether this computational effort is sufficiently offset by the reduction in the number of time elements used and improved Newton-Raphson convergence so as to be useful in solving optimal control problems in real time. Because certain of the element interior unknowns can be eliminated at the element level by solving a small set of nonlinear algebraic equations in which the nodal values are taken as given, the scheme may turn out to be especially powerful in a parallel computing environment. A different processor could be assigned to each element. The number of processors, strictly speaking, is not required to be any larger than the number of sub-regions which are free of discontinuities of any kind.

Checkout/demonstration application program for the SEL 840MP Multi-Processing Control System: Version 1 (MPCS/1)

NASA Technical Reports Server (NTRS)

Anderson, W. F.; Conway, J. R.; Keller, L. C.

1972-01-01

The characteristics of the application program were developed to verify and demonstrate the SEL 840MP Multi-Processing Control System - Version I (MPCS/1). The application program emphasizes the display support and task control capabilities. The application program is further intended to be used as an aid to familization with MPCS/1. It complements the information provided in the MPCS/1 Users Guide, Volume I and II.

Comprehensive Micromechanics-Analysis Code - Version 4.0

NASA Technical Reports Server (NTRS)

Arnold, S. M.; Bednarcyk, B. A.

2005-01-01

Version 4.0 of the Micromechanics Analysis Code With Generalized Method of Cells (MAC/GMC) has been developed as an improved means of computational simulation of advanced composite materials. The previous version of MAC/GMC was described in "Comprehensive Micromechanics-Analysis Code" (LEW-16870), NASA Tech Briefs, Vol. 24, No. 6 (June 2000), page 38. To recapitulate: MAC/GMC is a computer program that predicts the elastic and inelastic thermomechanical responses of continuous and discontinuous composite materials with arbitrary internal microstructures and reinforcement shapes. The predictive capability of MAC/GMC rests on a model known as the generalized method of cells (GMC) - a continuum-based model of micromechanics that provides closed-form expressions for the macroscopic response of a composite material in terms of the properties, sizes, shapes, and responses of the individual constituents or phases that make up the material. Enhancements in version 4.0 include a capability for modeling thermomechanically and electromagnetically coupled ("smart") materials; a more-accurate (high-fidelity) version of the GMC; a capability to simulate discontinuous plies within a laminate; additional constitutive models of materials; expanded yield-surface-analysis capabilities; and expanded failure-analysis and life-prediction capabilities on both the microscopic and macroscopic scales.

Comparison of the Tangent Linear Properties of Tracer Transport Schemes Applied to Geophysical Problems.

NASA Technical Reports Server (NTRS)

Kent, James; Holdaway, Daniel

2015-01-01

A number of geophysical applications require the use of the linearized version of the full model. One such example is in numerical weather prediction, where the tangent linear and adjoint versions of the atmospheric model are required for the 4DVAR inverse problem. The part of the model that represents the resolved scale processes of the atmosphere is known as the dynamical core. Advection, or transport, is performed by the dynamical core. It is a central process in many geophysical applications and is a process that often has a quasi-linear underlying behavior. However, over the decades since the advent of numerical modelling, significant effort has gone into developing many flavors of high-order, shape preserving, nonoscillatory, positive definite advection schemes. These schemes are excellent in terms of transporting the quantities of interest in the dynamical core, but they introduce nonlinearity through the use of nonlinear limiters. The linearity of the transport schemes used in Goddard Earth Observing System version 5 (GEOS-5), as well as a number of other schemes, is analyzed using a simple 1D setup. The linearized version of GEOS-5 is then tested using a linear third order scheme in the tangent linear version.

A Strategy for Integrating a Large Finite Element Model: X-33 Lessons Learned

NASA Technical Reports Server (NTRS)

McGhee, David S.

2000-01-01

The X-33 vehicle is an advanced technology demonstrator sponsored by NASA. For the past three years the Structural Dynamics & Loads Group of NASA's Marshall Space Flight Center has had the task of integrating the X-33 vehicle structural finite element model. In that time, five versions of the integrated vehicle model have been produced and a strategy has evolved that would benefit anyone given the task of integrating structural finite element models that have been generated by various modelers and companies. The strategy that has been presented here consists of six decisions that need to be made. These six decisions are: purpose of model, units, common material list, model numbering, interface control, and archive format. This strategy has been proved and expanded from experience on the X-33 vehicle.

Documentation for the MODFLOW 6 framework

USGS Publications Warehouse

Hughes, Joseph D.; Langevin, Christian D.; Banta, Edward R.

2017-08-10

MODFLOW is a popular open-source groundwater flow model distributed by the U.S. Geological Survey. Growing interest in surface and groundwater interactions, local refinement with nested and unstructured grids, karst groundwater flow, solute transport, and saltwater intrusion, has led to the development of numerous MODFLOW versions. Often times, there are incompatibilities between these different MODFLOW versions. The report describes a new MODFLOW framework called MODFLOW 6 that is designed to support multiple models and multiple types of models. The framework is written in Fortran using a modular object-oriented design. The primary framework components include the simulation (or main program), Timing Module, Solutions, Models, Exchanges, and Utilities. The first version of the framework focuses on numerical solutions, numerical models, and numerical exchanges. This focus on numerical models allows multiple numerical models to be tightly coupled at the matrix level.

Breast Cancer Epidemiology in Puerto Rico

DTIC Science & Technology

2009-06-01

Award 5 potential population controls from the above mentioned area is available to identify eligible controls. The survey instrument to be use ...be available for English speaking participants. An electronic version of the questionnaire is being developed using Microsoft Access. At this moment...questionnaire electronic version revision, and to test it with using a formal interview format. We hope to begin interviewing in September 2009

Biosphere-Atmosphere Transfer Scheme (BATS) version le as coupled to the NCAR community climate model. Technical note. [NCAR (National Center for Atmospheric Research)

DOE Office of Scientific and Technical Information (OSTI.GOV)

Dickinson, R.E.; Henderson-Sellers, A.; Kennedy, P.J.

A comprehensive model of land-surface processes has been under development suitable for use with various National Center for Atmospheric Research (NCAR) General Circulation Models (GCMs). Special emphasis has been given to describing properly the role of vegetation in modifying the surface moisture and energy budgets. The result of these efforts has been incorporated into a boundary package, referred to as the Biosphere-Atmosphere Transfer Scheme (BATS). The current frozen version, BATS1e is a piece of software about four thousand lines of code that runs as an offline version or coupled to the Community Climate Model (CCM).

Major modes of short-term climate variability in the newly developed NUIST Earth System Model (NESM)

NASA Astrophysics Data System (ADS)

Cao, Jian; Wang, Bin; Xiang, Baoqiang; Li, Juan; Wu, Tianjie; Fu, Xiouhua; Wu, Liguang; Min, Jinzhong

2015-05-01

A coupled earth system model (ESM) has been developed at the Nanjing University of Information Science and Technology (NUIST) by using version 5.3 of the European Centre Hamburg Model (ECHAM), version 3.4 of the Nucleus for European Modelling of the Ocean (NEMO), and version 4.1 of the Los Alamos sea ice model (CICE). The model is referred to as NUIST ESM1 (NESM1). Comprehensive and quantitative metrics are used to assess the model's major modes of climate variability most relevant to subseasonal-to-interannual climate prediction. The model's assessment is placed in a multi-model framework. The model yields a realistic annual mean and annual cycle of equatorial SST, and a reasonably realistic precipitation climatology, but has difficulty in capturing the spring-fall asymmetry and monsoon precipitation domains. The ENSO mode is reproduced well with respect to its spatial structure, power spectrum, phase locking to the annual cycle, and spatial structures of the central Pacific (CP)-ENSO and eastern Pacific (EP)-ENSO; however, the equatorial SST variability, biennial component of ENSO, and the amplitude of CP-ENSO are overestimated. The model captures realistic intraseasonal variability patterns, the vertical-zonal structures of the first two leading predictable modes of Madden-Julian Oscillation (MJO), and its eastward propagation; but the simulated MJO speed is significantly slower than observed. Compared with the T42 version, the high resolution version (T159) demonstrates improved simulation with respect to the climatology, interannual variance, monsoon-ENSO lead-lag correlation, spatial structures of the leading mode of the Asian-Australian monsoon rainfall variability, and the eastward propagation of the MJO.

Argonne's Michael Wang talks about the GREET Model for reducing vehicle emi

ScienceCinema

Wang, Michael

2018-05-11

To fully evaluate energy and emission impacts of advanced vehicle technologies and new transportation fuels, the fuel cycle from wells to wheels and the vehicle cycle through material recovery and vehicle disposal need to be considered. Sponsored by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE), Argonne has developed a full life-cycle model called GREET (Greenhouse gases, Regulated Emissions, and Energy use in Transportation). It allows researchers and analysts to evaluate various vehicle and fuel combinations on a full fuel-cycle/vehicle-cycle basis. The first version of GREET was released in 1996. Since then, Argonne has continued to update and expand the model. The most recent GREET versions are the GREET 1 2012 version for fuel-cycle analysis and GREET 2.7 version for vehicle-cycle analysis.

An investigation into the vertical axis control power requirements for landing VTOL type aircraft onboard nonaviation ships in various sea states

NASA Technical Reports Server (NTRS)

Stevens, M. E.; Roskam, J.

1985-01-01

The problem of determining the vertical axis control requirements for landing a VTOL aircraft on a moving ship deck in various sea states is examined. Both a fixed-base piloted simulation and a nonpiloted simulation were used to determine the landing performance as influenced by thrust-to-weight ratio, vertical damping, and engine lags. The piloted simulation was run using a fixed-based simulator at Ames Research center. Simplified versions of an existing AV-8A Harrier model and an existing head-up display format were used. The ship model used was that of a DD963 class destroyer. Simplified linear models of the pilot, aircraft, ship motion, and ship air-wake turbulence were developed for the nonpiloted simulation. A unique aspect of the nonpiloted simulation was the development of a model of the piloting strategy used for shipboard landing. This model was refined during the piloted simulation until it provided a reasonably good representation of observed pilot behavior.

Nonlinear 3D visco-resistive MHD modeling of fusion plasmas: a comparison between numerical codes

NASA Astrophysics Data System (ADS)

Bonfiglio, D.; Chacon, L.; Cappello, S.

2008-11-01

Fluid plasma models (and, in particular, the MHD model) are extensively used in the theoretical description of laboratory and astrophysical plasmas. We present here a successful benchmark between two nonlinear, three-dimensional, compressible visco-resistive MHD codes. One is the fully implicit, finite volume code PIXIE3D [1,2], which is characterized by many attractive features, notably the generalized curvilinear formulation (which makes the code applicable to different geometries) and the possibility to include in the computation the energy transport equation and the extended MHD version of Ohm's law. In addition, the parallel version of the code features excellent scalability properties. Results from this code, obtained in cylindrical geometry, are compared with those produced by the semi-implicit cylindrical code SpeCyl, which uses finite differences radially, and spectral formulation in the other coordinates [3]. Both single and multi-mode simulations are benchmarked, regarding both reversed field pinch (RFP) and ohmic tokamak magnetic configurations. [1] L. Chacon, Computer Physics Communications 163, 143 (2004). [2] L. Chacon, Phys. Plasmas 15, 056103 (2008). [3] S. Cappello, Plasma Phys. Control. Fusion 46, B313 (2004) & references therein.

FHWA Traffic Noise Model version 1.1 user's guide (Addendum)

DOT National Transportation Integrated Search

2000-09-30

In March 1998, the Federal Highway Administration (FHWA) Office of Natural Environment, released the FHWA Traffic Noise Model (FHWA TNM) Version 1.0, a state-of-the-art computer program for highway traffic noise prediction and analysis. Since then, t...

HYDROLOGIC EVALUATION OF LANDFILL PERFORMANCE (HELP) MODEL - USER'S GUIDE FOR VERSION 3

EPA Science Inventory

This report documents the solution methods and process descriptions used in the Version 3 of the HELP model. Program documentation including program options, system and operating requirements, file structures, program structure and variable descriptions are provided in a separat...

Heuristics in Problem Solving: The Role of Direction in Controlling Search Space

ERIC Educational Resources Information Center

Chu, Yun; Li, Zheng; Su, Yong; Pizlo, Zygmunt

2010-01-01

Isomorphs of a puzzle called m+m resulted in faster solution times and an easily reproduced solution path in a labeled version of the problem compared to a more difficult binary version. We conjecture that performance is related to a type of heuristic called direction that not only constrains search space in the labeled version, but also…

Air Traffic Control Improvement Using Prioritized CSMA

NASA Technical Reports Server (NTRS)

Robinson, Daryl C.

2001-01-01

Version 7 simulations of the industry-standard network simulation software "OPNET" are presented of two applications of the Aeronautical Telecommunications Network (ATN), Controller Pilot Data Link Communications (CPDLC) and Automatic Dependent Surveillance-Broadcast mode (ADS-B), over VHF Data Link mode 2 (VDL-2). Communication is modeled for air traffic between just three cities. All aircraft are assumed to have the same equipage. The simulation involves Air Traffic Control (ATC) ground stations and 105 aircraft taking off, flying realistic free-flight trajectories, and landing in a 24-hr period. All communication is modeled as unreliable. Collision-less, prioritized carrier sense multiple access (CSMA) is successfully tested. The statistics presented include latency, queue length, and packet loss. This research may show that a communications system simpler than the currently accepted standard envisioned may not only suffice, but also surpass performance of the standard at a lower cost of deployment.

Analysis of rotor vibratory loads using higher harmonic pitch control

NASA Technical Reports Server (NTRS)

Quackenbush, Todd R.; Bliss, Donald B.; Boschitsch, Alexander H.; Wachspress, Daniel A.

1992-01-01

Experimental studies of isolated rotors in forward flight have indicated that higher harmonic pitch control can reduce rotor noise. These tests also show that such pitch inputs can generate substantial vibratory loads. The modification is summarized of the RotorCRAFT (Computation of Rotor Aerodynamics in Forward flighT) analysis of isolated rotors to study the vibratory loading generated by high frequency pitch inputs. The original RotorCRAFT code was developed for use in the computation of such loading, and uses a highly refined rotor wake model to facilitate this task. The extended version of RotorCRAFT incorporates a variety of new features including: arbitrary periodic root pitch control; computation of blade stresses and hub loads; improved modeling of near wake unsteady effects; and preliminary implementation of a coupled prediction of rotor airloads and noise. Correlation studies are carried out with existing blade stress and vibratory hub load data to assess the performance of the extended code.

IGT-Open: An open-source, computerized version of the Iowa Gambling Task.

PubMed

Dancy, Christopher L; Ritter, Frank E

2017-06-01

The Iowa Gambling Task (IGT) is commonly used to understand the processes involved in decision-making. Though the task was originally run without a computer, using a computerized version of the task has become typical. These computerized versions of the IGT are useful, because they can make the task more standardized across studies and allow for the task to be used in environments where a physical version of the task may be difficult or impossible to use (e.g., while collecting brain imaging data). Though these computerized versions of the IGT have been useful for experimentation, having multiple software implementations of the task could present reliability issues. We present an open-source software version of the Iowa Gambling Task (called IGT-Open) that allows for millisecond visual presentation accuracy and is freely available to be used and modified. This software has been used to collect data from human subjects and also has been used to run model-based simulations with computational process models developed to run in the ACT-R architecture.

Generic substitution: micro evidence from register data in Norway.

PubMed

Dalen, Dag Morten; Furu, Kari; Locatelli, Marilena; Strøm, Steinar

2011-02-01

The importance of prices, doctor and patient characteristics, and market institutions for the likelihood of choosing generic drugs instead of the more expensive original brand-name version are examined. Using an extensive dataset extracted from The Norwegian Prescription Database containing all prescriptions dispensed to individuals in February 2004 and 2006 on 23 different drugs (chemical substances) in Norway, we find strong evidence for the importance of both doctor and patient characteristics for the choice probabilities. The price difference between brand and generic versions and insurance coverage both affect generic substitution. Moreover, controlling for the retail chain affiliation of the dispensing pharmacy, we find that pharmacies play an important role in promoting generic substitution. In markets with more recent entry of generic drugs, brand-name loyalty proves to be much stronger, giving less explanatory power to our demand model.

Information Technology: A Tool to Cut Health Care Costs

NASA Technical Reports Server (NTRS)

Mukkamala, Ravi; Maly, K. J.; Overstreet, C. M.; Foudriat, E. C.

1996-01-01

Old Dominion University embarked on a project to see how current computer technology could be applied to reduce the cost and or to improve the efficiency of health care services. We designed and built a prototype for an integrated medical record system (MRS). The MRS is written in Tool control language/Tool kit (Tcl/Tk). While the initial version of the prototype had patient information hard coded into the system, later versions used an INGRES database for storing patient information. Currently, we have proposed an object-oriented model for implementing MRS. These projects involve developing information systems for physicians and medical researchers to enhance their ability for improved treatment at reduced costs. The move to computerized patient records is well underway, several standards exist for laboratory records, and several groups are working on standards for other portions of the patient record.

Parameter identification using a creeping-random-search algorithm

NASA Technical Reports Server (NTRS)

Parrish, R. V.

1971-01-01

A creeping-random-search algorithm is applied to different types of problems in the field of parameter identification. The studies are intended to demonstrate that a random-search algorithm can be applied successfully to these various problems, which often cannot be handled by conventional deterministic methods, and, also, to introduce methods that speed convergence to an extremal of the problem under investigation. Six two-parameter identification problems with analytic solutions are solved, and two application problems are discussed in some detail. Results of the study show that a modified version of the basic creeping-random-search algorithm chosen does speed convergence in comparison with the unmodified version. The results also show that the algorithm can successfully solve problems that contain limits on state or control variables, inequality constraints (both independent and dependent, and linear and nonlinear), or stochastic models.

Do STEM fields need a makeover?: The effect of role model femininity on men and women's interest in STEM

NASA Astrophysics Data System (ADS)

Howard, Carolynn

Women continue to be underrepresented in science, technology, engineering, and mathematics (STEM) fields. This lack of women is problematic because it diminishes perspective, input, and expertise that women could provide. Consequently, this thesis examined the benefits of exposure to peer role models for increasing women's interest in STEM, which may ultimately lead more women to enter STEM fields. The role model research to date has amassed considerable evidence showing that role model exposure is beneficial; yet, questions still remain about what makes these role models effective. Accordingly, this thesis investigated whether feminine female role models increase women's interest in STEM and improve their perceptions of female STEM role models relative to "neutral" female role models. Across three experiments men and women were exposed to role models and their interest in STEM was measured. All experiments exposed participants to one of three articles about a peer role model (a female role model who embodies femininity (e.g. wears makeup), a female role model who has gender neutral qualities/behaviors [e.g., works hard], or a male role model who embodies neutral traits) and Experiments 2 and 3 had a fourth control condition in which participants read about the history of SDSU (a control condition). In the first two experiments interest in physics was measured using an adapted version of the STEM Career Interest Survey (CIS). Experiment 3 used an adapted version of the STEM CIS scale, but measured overall interest in STEM by including subscales for each of the four STEM areas with a composite score serving as the primary dependent variable. Experiments 1 and 2 demonstrated that women's interest in physics was no different than men's after exposure to a feminine female role model compared to a neutral female and neutral male role model. Furthermore, women's interest in physics was greater in the feminine condition compared to all other conditions for the first two experiments, thus demonstrating that a competent feminine role model may be useful in piquing women's interest in physics. Experiment 3, however, did not display this pattern for women's interest in STEM overall.

Effects of Social Network Exposure on Nutritional Learning: Development of an Online Educational Platform.

PubMed

Dagan, Noa; Beskin, Daniel; Brezis, Mayer; Reis, Ben Y

2015-10-05

Social networking sites (SNSs) such as Facebook have the potential to enhance online public health interventions, in part, as they provide social exposure and reinforcement. The objective of the study was to evaluate whether social exposure provided by SNSs enhances the effects of online public health interventions. As a sample intervention, we developed Food Hero, an online platform for nutritional education in which players feed a virtual character according to their own nutritional needs and complete a set of virtual sport challenges. The platform was developed in 2 versions: a "private version" in which a user can see only his or her own score, and a "social version" in which a user can see other players' scores, including preexisting Facebook friends. We assessed changes in participants' nutritional knowledge using 4 quiz scores and 3 menu-assembly scores. Monitoring feeding and exercising attempts assessed engagement with the platform. The 2 versions of the platform were randomly assigned between a study group (30 members receiving the social version) and a control group (33 members, private version). The study group's performance on the quizzes gradually increased over time, relative to that of the control group, becoming significantly higher by the fourth quiz (P=.02). Furthermore, the study group's menu-assembly scores improved over time compared to the first score, whereas the control group's performance deteriorated. Study group members spent an average of 3:40 minutes assembling each menu compared to 2:50 minutes in the control group, and performed an average of 1.58 daily sport challenges, compared to 1.21 in the control group (P=.03). This work focused on isolating the SNSs' social effects in order to help guide future online interventions. Our results indicate that the social exposure provided by SNSs is associated with increased engagement and learning in an online nutritional educational platform.

Valence-dependent influence of serotonin depletion on model-based choice strategy

PubMed Central

Worbe, Y; Palminteri, S; Savulich, G; Daw, N D; Fernandez-Egea, E; Robbins, T W; Voon, V

2016-01-01

Human decision-making arises from both reflective and reflexive mechanisms, which underpin goal-directed and habitual behavioural control. Computationally, these two systems of behavioural control have been described by different learning algorithms, model-based and model-free learning, respectively. Here, we investigated the effect of diminished serotonin (5-hydroxytryptamine) neurotransmission using dietary tryptophan depletion (TD) in healthy volunteers on the performance of a two-stage decision-making task, which allows discrimination between model-free and model-based behavioural strategies. A novel version of the task was used, which not only examined choice balance for monetary reward but also for punishment (monetary loss). TD impaired goal-directed (model-based) behaviour in the reward condition, but promoted it under punishment. This effect on appetitive and aversive goal-directed behaviour is likely mediated by alteration of the average reward representation produced by TD, which is consistent with previous studies. Overall, the major implication of this study is that serotonin differentially affects goal-directed learning as a function of affective valence. These findings are relevant for a further understanding of psychiatric disorders associated with breakdown of goal-directed behavioural control such as obsessive-compulsive disorders or addictions. PMID:25869808

Validation of Storm Water Management Model Storm Control Measures Modules

NASA Astrophysics Data System (ADS)

Simon, M. A.; Platz, M. C.

2017-12-01

EPA's Storm Water Management Model (SWMM) is a computational code heavily relied upon by industry for the simulation of wastewater and stormwater infrastructure performance. Many municipalities are relying on SWMM results to design multi-billion-dollar, multi-decade infrastructure upgrades. Since the 1970's, EPA and others have developed five major releases, the most recent ones containing storm control measures modules for green infrastructure. The main objective of this study was to quantify the accuracy with which SWMM v5.1.10 simulates the hydrologic activity of previously monitored low impact developments. Model performance was evaluated with a mathematical comparison of outflow hydrographs and total outflow volumes, using empirical data and a multi-event, multi-objective calibration method. The calibration methodology utilized PEST++ Version 3, a parameter estimation tool, which aided in the selection of unmeasured hydrologic parameters. From the validation study and sensitivity analysis, several model improvements were identified to advance SWMM LID Module performance for permeable pavements, infiltration units and green roofs, and these were performed and reported herein. Overall, it was determined that SWMM can successfully simulate low impact development controls given accurate model confirmation, parameter measurement, and model calibration.

PRMS-IV, the precipitation-runoff modeling system, version 4

USGS Publications Warehouse

Markstrom, Steven L.; Regan, R. Steve; Hay, Lauren E.; Viger, Roland J.; Webb, Richard M.; Payn, Robert A.; LaFontaine, Jacob H.

2015-01-01

Computer models that simulate the hydrologic cycle at a watershed scale facilitate assessment of variability in climate, biota, geology, and human activities on water availability and flow. This report describes an updated version of the Precipitation-Runoff Modeling System. The Precipitation-Runoff Modeling System is a deterministic, distributed-parameter, physical-process-based modeling system developed to evaluate the response of various combinations of climate and land use on streamflow and general watershed hydrology. Several new model components were developed, and all existing components were updated, to enhance performance and supportability. This report describes the history, application, concepts, organization, and mathematical formulation of the Precipitation-Runoff Modeling System and its model components. This updated version provides improvements in (1) system flexibility for integrated science, (2) verification of conservation of water during simulation, (3) methods for spatial distribution of climate boundary conditions, and (4) methods for simulation of soil-water flow and storage.

Cross-Cultural Adaptation of the Urticaria Control Test From German to Castilian Spanish.

PubMed

García-Díez, I; Curto-Barredo, L; Weller, K; Pujol, R M; Maurer, M; Giménez-Arnau, A M

2015-11-01

The clinical concept of urticaria embraces a heterogeneous group of conditions classified according to their clinical course as acute (lasting less than 6 weeks) or chronic (lasting 6 weeks or more). Chronic urticaria may be either spontaneous or induced. Few tools are available for monitoring the various clinical forms of this disease or for evaluating its impact on quality of life. The recently developed Urticaria Control Test to evaluate disease control is available in German, the original language, and American English. To culturally adapt the long and short versions of the Urticaria Control Test to Castilian Spanish to ensure equivalence between the translated items and those of the original version. To translate the Urticaria Control Test we followed the International Society for Pharmacoeconomics and Outcomes Research good practice guidelines, starting with forward translation and moving through back translation and cognitive debriefing steps. Three items were modified when the first Spanish version, translated from German, was discussed (cognitive debriefing). The revised translation was then translated back to German and sent to the Urticaria Control Test authors, who modified one item they considered had acquired a different focus through translation. A third Spanish version was then prepared and after minor proofreading changes was considered definitive. This study was the first step in making it possible to use the Urticaria Control Test questionnaire in Castilian Spanish. The next step will be to validate the translated questionnaire. Copyright © 2015 Elsevier España, S.L.U. and AEDV. All rights reserved.

Implementation of a Message Passing Interface into a Cloud-Resolving Model for Massively Parallel Computing

NASA Technical Reports Server (NTRS)

Juang, Hann-Ming Henry; Tao, Wei-Kuo; Zeng, Xi-Ping; Shie, Chung-Lin; Simpson, Joanne; Lang, Steve

2004-01-01

The capability for massively parallel programming (MPP) using a message passing interface (MPI) has been implemented into a three-dimensional version of the Goddard Cumulus Ensemble (GCE) model. The design for the MPP with MPI uses the concept of maintaining similar code structure between the whole domain as well as the portions after decomposition. Hence the model follows the same integration for single and multiple tasks (CPUs). Also, it provides for minimal changes to the original code, so it is easily modified and/or managed by the model developers and users who have little knowledge of MPP. The entire model domain could be sliced into one- or two-dimensional decomposition with a halo regime, which is overlaid on partial domains. The halo regime requires that no data be fetched across tasks during the computational stage, but it must be updated before the next computational stage through data exchange via MPI. For reproducible purposes, transposing data among tasks is required for spectral transform (Fast Fourier Transform, FFT), which is used in the anelastic version of the model for solving the pressure equation. The performance of the MPI-implemented codes (i.e., the compressible and anelastic versions) was tested on three different computing platforms. The major results are: 1) both versions have speedups of about 99% up to 256 tasks but not for 512 tasks; 2) the anelastic version has better speedup and efficiency because it requires more computations than that of the compressible version; 3) equal or approximately-equal numbers of slices between the x- and y- directions provide the fastest integration due to fewer data exchanges; and 4) one-dimensional slices in the x-direction result in the slowest integration due to the need for more memory relocation for computation.

Psychometric properties of the Sexual Excitation/Sexual Inhibition Inventory for Women and Men (SESII-W/M) and the Sexual Excitation Scales/Sexual Inhibition Scales short form (SIS/SES-SF) in a population-based sample in Germany

PubMed Central

Scholten, Saskia; Margraf, Jürgen

2018-01-01

The Sexual Excitation Sexual/Inhibition Inventory for Women and Men (SESII-W/M) and the Sexual Excitation Scales/Sexual Inhibition Scales short form (SIS/SES-SF) are two self-report questionnaires for assessing sexual excitation (SE) and sexual inhibition (SI). According to the dual control model of sexual response, SE and SI differ between individuals and influence the occurrence of sexual arousal in given situations. Extreme levels of SE and SI are postulated to be associated with sexual difficulties or risky sexual behaviors. The present study was designed to assess the psychometric properties of the German versions of both questionnaires utilizing a large population-based sample of 2,708 participants (Mage = 51.19, SD = 14.03). Overall, psychometric evaluation of the two instruments yielded good convergent and discriminant validity and mediocre to good internal consistency. The original 30-item version of the SESII-W/M did not show a sufficient model fit. For a 24-item version of the SESII-W/M partial strong measurement invariance across gender, and strong measurement invariance across relationship status, age, and educational levels were established. The original structure (14 items, 3 factors) of the SIS/SES-SF was not replicated. However, a 4-factor model including 13 items showed a good model fit and strong measurement invariance across the before-mentioned participant groups. For both questionnaires, partial strong measurement invariance with the original American versions of the scales was found. As some factors showed unsatisfactory internal consistency and the factor structure of the original scales could not be replicated, scores on several SE- and SI-factors should be interpreted with caution. However, most analyses indicated sufficient psychometric quality of the German SESII-W/M and SIS/SES-SF and their use can be recommended in German-speaking samples. More research with diverse samples (i.e., different sexual orientations, individuals with sexual difficulties) is needed to ensure the replicability of the factor solutions presented in this study. PMID:29529045

User's Guide to the Western Root Disease Model, Version 3.0

Treesearch

Susan J. Frankel

1998-01-01

Effects of Armillaria spp., Phellinus weirii, Heterobasidion annosum, or bark beetles on stand dynamics are represented by the Western Root Disease Model,Version 3.0. This model, which operates in conjunction with the Forest Vegetation Simulator, can be used to evaluate the effects of many silvicultural practices. This guide contains instructions for use, detailed...

Field evaluations of a forestry version of DRAINMOD-NII model

Treesearch

S. Tian; M. A. Youssef; R.W. Skaggs; D.M. Amatya; G.M. Chescheir

2010-01-01

This study evaluated the performance of the newly developed forestry version of DRAINMOD-NII model using a long term (21-year) data set collected from an artificially drained loblolly pine (Pinus taeda L.) plantation in eastern North Carolina, U.S.A. The model simulates the main hydrological and biogeochemical processes in drained forested lands. The...

Hydrologic Evaluation of Landfill Performance (HELP) Model: B (Set Includes, A- User's Guide for Version 3 w/disks, B-Engineering Documentation for Version 3

EPA Science Inventory

The Hydrologic Evaluation of Landfill Performance (HELP) computer program is a quasi-two-dimensional hydrologic model of water movement across, into, through and out of landfills. The model accepts weather, soil and design data. Landfill systems including various combinations o...

Validation of the Arabic version of the score for allergic rhinitis tool.

PubMed

Alharethy, Sami; Wedami, Mawaheb Al; Syouri, Falah; Alqabbani, Almaha A; Baqays, Abdulsalam; Mesallam, Tamer; Aldrees, Turki

2017-01-01

Allergic rhinitis (AR) is a common inflammation of the nasal mucosa in response to allergen exposure. We translated and validated the Score for Allergic Rhinitis (SFAR) into an Arabic version so that the disease can be studied in an Arabic population. SFAR is a non-invasive self-administered tool that evaluates eight items related to AR. This study aimed to translate and culturally adapt the SFAR questionnaire into Arabic, and assess the validity, consistency, and reliability of the translated version in an Arabic-speaking population of patients with suspected AR. Cross-sectional. Tertiary care hospital in Riyadh. The Arabic version of the SFAR was administered to patients with suspected AR and control participants. Comparison of the AR and control groups to determine the test-retest reliability and internal consistency of the instrument. The AR (n=173) and control (n=75) groups had significantly different Arabic SFAR scores (P < .0001). The instrument provided satisfactory internal consistency (Cronbach's alpha value of 0.7). The test-retest reliability was excellent for the total Arabic SFAR score (r =0.836, P < .0001). These findings demonstrate that the Arabic version of the SFAR is a valid tool that can be used to screen Arabic speakers with suspected AR. The absence of objective allergy testing.

Translation and cultural adaptation of a specific instrument for measuring asthma control and asthma status: the Asthma Control and Communication Instrument

PubMed Central

Tavares, Michelle Gonçalves de Souza; Brümmer, Carolina Finardi; Nicolau, Gabriela Valente; de Melo, José Tavares; Nazário, Nazaré Otilia; Steidle, Leila John Marques; Patino, Cecília Maria; Pizzichini, Marcia Margaret Menezes; Pizzichini, Emílio

2017-01-01

ABSTRACT Objective: To translate the Asthma Control and Communication Instrument (ACCI) to Portuguese and adapt it for use in Brazil. Methods: The ACCI was translated to Portuguese and adapted for use in Brazil in accordance with internationally accepted guidelines. The protocol included the following steps: permission and rights of use granted by the original author; translation of the ACCI from English to Portuguese; reconciliation; back-translation; review and harmonization of the back-translation; approval from the original author; review of the Portuguese version of the ACCI by an expert panel; cognitive debriefing (the clarity, understandability, and acceptability of the translated version being tested in a sample of the target population); and reconciliation and preparation of the final version. Results: During the cognitive debriefing process, 41 asthma patients meeting the inclusion criteria completed the ACCI and evaluated the clarity of the questions/statements. The clarity index for all ACCI items was > 0.9, meaning that all items were considered to be clear. Conclusions: The ACCI was successfully translated to Portuguese and culturally adapted for use in Brazil, the translated version maintaining the psychometric properties of the original version. The ACCI can be used in clinical practice because it is easy to understand and easily applied. PMID:29365000

The Development and Psychometric Validation of an Arabic-Language Version of the Pain Catastrophizing Scale

PubMed Central

Fares, Souha

2017-01-01

Context. The Pain Catastrophizing Scale (PCS) is the most widely used measure of pain-specific catastrophizing. Objectives. The purpose of the present study was to develop and psychometrically evaluate an Arabic-language version of the PCS. Methods. In Study 1, 150 adult chronic nonmalignant pain patients seeking treatment at a hospital setting completed the PCS-A and a number of self-report measures assessing clinical parameters of pain, symptoms of depression, and quality of life. Study 2 employed a cold pressor pain task to examine the PCS-A in a sample of 44 healthy university students. Results. Exploratory factor analyses suggested a two-factor structure. Confirmatory factor analysis comparing the 2-factor model, Sullivan's original 3-factor model, and a 1-factor model based on the total score all provided adequate fit to the data. Cronbach's alpha coefficients across all models met or exceeded accepted standards of reliability. Catastrophizing was associated with higher levels of depression and increased pain intensity and interference. Catastrophizing predicted decreased quality of life, even after controlling for the contribution of gender, employment, depression, and pain interference. PCS-A scores were positively correlated with heightened experimental pain severity and decreased pain tolerance. Conclusion. The present results provide strong support for the psychometric properties of the PCS-A. PMID:28190958

Examing the Validity of the Adapted Alabama Parenting Questionnaire Parent Global Report Version

PubMed Central

Maguin, Eugene; Nochajski, Thomas; Dewit, David; Safyer, Andrew

2015-01-01

The purpose of the present study was to comprehensively examine the validity of an adapted version of the parent global report form of the Alabama Parenting Questionnaire (APQ) with respect to its factor structure, relationships with demographic and response style covariates, and differential item functioning (DIF). The APQ was adapted by omitting the Corporal Punishment and the other discipline items. The sample consisted of 674 Canadian and United States families having a 9–12 year old child and at least one parent-figure who had received treatment within the past five years for alcohol problems or met criteria for alcohol abuse or dependence. The primary parent in each family completed the APQ. The four factor CFA model of the four published scales used and the three factor CFA model of those scales from prior research were rejected. Exploratory structural equation modeling was then used. The final three factor model combined the author-defined Involvement and Positive Parenting scales and retained the original Poor Monitoring/Supervision and Inconsistent Discipline scales. However, there were substantial numbers of moderate magnitude cross-loadings and large magnitude residual covariances. Differential item functioning (DIF) was observed for a number of APQ items. Controlling for DIF, response style and demographic variables were related significantly to the factors. PMID:26348028

Terminal Area Simulation System User's Guide - Version 10.0

NASA Technical Reports Server (NTRS)

Switzer, George F.; Proctor, Fred H.

2014-01-01

The Terminal Area Simulation System (TASS) is a three-dimensional, time-dependent, large eddy simulation model that has been developed for studies of wake vortex and weather hazards to aviation, along with other atmospheric turbulence, and cloud-scale weather phenomenology. This document describes the source code for TASS version 10.0 and provides users with needed documentation to run the model. The source code is programed in Fortran language and is formulated to take advantage of vector and efficient multi-processor scaling for execution on massively-parallel supercomputer clusters. The code contains different initialization modules allowing the study of aircraft wake vortex interaction with the atmosphere and ground, atmospheric turbulence, atmospheric boundary layers, precipitating convective clouds, hail storms, gust fronts, microburst windshear, supercell and mesoscale convective systems, tornadic storms, and ring vortices. The model is able to operate in either two- or three-dimensions with equations numerically formulated on a Cartesian grid. The primary output from the TASS is time-dependent domain fields generated by the prognostic equations and diagnosed variables. This document will enable a user to understand the general logic of TASS, and will show how to configure and initialize the model domain. Also described are the formats of the input and output files, as well as the parameters that control the input and output.

Simulink-Based Simulation Architecture for Evaluating Controls for Aerospace Vehicles (SAREC-ASV)

NASA Technical Reports Server (NTRS)

Christhilf, David m.; Bacon, Barton J.

2006-01-01

The Simulation Architecture for Evaluating Controls for Aerospace Vehicles (SAREC-ASV) is a Simulink-based approach to providing an engineering quality desktop simulation capability for finding trim solutions, extracting linear models for vehicle analysis and control law development, and generating open-loop and closed-loop time history responses for control system evaluation. It represents a useful level of maturity rather than a finished product. The layout is hierarchical and supports concurrent component development and validation, with support from the Concurrent Versions System (CVS) software management tool. Real Time Workshop (RTW) is used to generate pre-compiled code for substantial component modules, and templates permit switching seamlessly between original Simulink and code compiled for various platforms. Two previous limitations are addressed. Turn around time for incorporating tabular model components was improved through auto-generation of required Simulink diagrams based on data received in XML format. The layout was modified to exploit a Simulink "compile once, evaluate multiple times" capability for zero elapsed time for use in trimming and linearizing. Trim is achieved through a Graphical User Interface (GUI) with a narrow, script definable interface to the vehicle model which facilitates incorporating new models.

Impact of Physics Parameterization Ordering in a Global Atmosphere Model

DOE PAGES

Donahue, Aaron S.; Caldwell, Peter M.

2018-02-02

Because weather and climate models must capture a wide variety of spatial and temporal scales, they rely heavily on parameterizations of subgrid-scale processes. The goal of this study is to demonstrate that the assumptions used to couple these parameterizations have an important effect on the climate of version 0 of the Energy Exascale Earth System Model (E3SM) General Circulation Model (GCM), a close relative of version 1 of the Community Earth System Model (CESM1). Like most GCMs, parameterizations in E3SM are sequentially split in the sense that parameterizations are called one after another with each subsequent process feeling the effectmore » of the preceding processes. This coupling strategy is noncommutative in the sense that the order in which processes are called impacts the solution. By examining a suite of 24 simulations with deep convection, shallow convection, macrophysics/microphysics, and radiation parameterizations reordered, process order is shown to have a big impact on predicted climate. In particular, reordering of processes induces differences in net climate feedback that are as big as the intermodel spread in phase 5 of the Coupled Model Intercomparison Project. One reason why process ordering has such a large impact is that the effect of each process is influenced by the processes preceding it. Where output is written is therefore an important control on apparent model behavior. Application of k-means clustering demonstrates that the positioning of macro/microphysics and shallow convection plays a critical role on the model solution.« less

Impact of Physics Parameterization Ordering in a Global Atmosphere Model

NASA Astrophysics Data System (ADS)

Donahue, Aaron S.; Caldwell, Peter M.

2018-02-01

Because weather and climate models must capture a wide variety of spatial and temporal scales, they rely heavily on parameterizations of subgrid-scale processes. The goal of this study is to demonstrate that the assumptions used to couple these parameterizations have an important effect on the climate of version 0 of the Energy Exascale Earth System Model (E3SM) General Circulation Model (GCM), a close relative of version 1 of the Community Earth System Model (CESM1). Like most GCMs, parameterizations in E3SM are sequentially split in the sense that parameterizations are called one after another with each subsequent process feeling the effect of the preceding processes. This coupling strategy is noncommutative in the sense that the order in which processes are called impacts the solution. By examining a suite of 24 simulations with deep convection, shallow convection, macrophysics/microphysics, and radiation parameterizations reordered, process order is shown to have a big impact on predicted climate. In particular, reordering of processes induces differences in net climate feedback that are as big as the intermodel spread in phase 5 of the Coupled Model Intercomparison Project. One reason why process ordering has such a large impact is that the effect of each process is influenced by the processes preceding it. Where output is written is therefore an important control on apparent model behavior. Application of k-means clustering demonstrates that the positioning of macro/microphysics and shallow convection plays a critical role on the model solution.

Impact of Physics Parameterization Ordering in a Global Atmosphere Model

DOE Office of Scientific and Technical Information (OSTI.GOV)

Donahue, Aaron S.; Caldwell, Peter M.

Because weather and climate models must capture a wide variety of spatial and temporal scales, they rely heavily on parameterizations of subgrid-scale processes. The goal of this study is to demonstrate that the assumptions used to couple these parameterizations have an important effect on the climate of version 0 of the Energy Exascale Earth System Model (E3SM) General Circulation Model (GCM), a close relative of version 1 of the Community Earth System Model (CESM1). Like most GCMs, parameterizations in E3SM are sequentially split in the sense that parameterizations are called one after another with each subsequent process feeling the effectmore » of the preceding processes. This coupling strategy is noncommutative in the sense that the order in which processes are called impacts the solution. By examining a suite of 24 simulations with deep convection, shallow convection, macrophysics/microphysics, and radiation parameterizations reordered, process order is shown to have a big impact on predicted climate. In particular, reordering of processes induces differences in net climate feedback that are as big as the intermodel spread in phase 5 of the Coupled Model Intercomparison Project. One reason why process ordering has such a large impact is that the effect of each process is influenced by the processes preceding it. Where output is written is therefore an important control on apparent model behavior. Application of k-means clustering demonstrates that the positioning of macro/microphysics and shallow convection plays a critical role on the model solution.« less

Can we model observed soil carbon changes from a dense inventory? A case study over England and Wales using three versions of the ORCHIDEE ecosystem model (AR5, AR5-PRIM and O-CN)

NASA Astrophysics Data System (ADS)

Guenet, B.; Moyano, F. E.; Vuichard, N.; Kirk, G. J. D.; Bellamy, P. H.; Zaehle, S.; Ciais, P.

2013-12-01

A widespread decrease of the topsoil carbon content was observed over England and Wales during the period 1978-2003 in the National Soil Inventory (NSI), amounting to a carbon loss of 4.44 Tg yr-1 over 141 550 km2. Subsequent modelling studies have shown that changes in temperature and precipitation could only account for a small part of the observed decrease, and therefore that changes in land use and management and resulting changes in heterotrophic respiration or net primary productivity were the main causes. So far, all the models used to reproduce the NSI data have not accounted for plant-soil interactions and have only been soil carbon models with carbon inputs forced by data. Here, we use three different versions of a process-based coupled soil-vegetation model called ORCHIDEE (Organizing Carbon and Hydrology in Dynamic Ecosystems), in order to separate the effect of trends in soil carbon input from soil carbon mineralization induced by climate trends over 1978-2003. The first version of the model (ORCHIDEE-AR5), used for IPCC-AR5 CMIP5 Earth System simulations, is based on three soil carbon pools defined with first-order decomposition kinetics, as in the CENTURY model. The second version (ORCHIDEE-AR5-PRIM) built for this study includes a relationship between litter carbon and decomposition rates, to reproduce a priming effect on decomposition. The last version (O-CN) takes into account N-related processes. Soil carbon decomposition in O-CN is based on CENTURY, but adds N limitations on litter decomposition. We performed regional gridded simulations with these three versions of the ORCHIDEE model over England and Wales. None of the three model versions was able to reproduce the observed NSI soil carbon trend. This suggests either that climate change is not the main driver for observed soil carbon losses or that the ORCHIDEE model even with priming or N effects on decomposition lacks the basic mechanisms to explain soil carbon change in response to climate, which would raise a caution flag about the ability of this type of model to project soil carbon changes in response to future warming. A third possible explanation could be that the NSI measurements made on the topsoil are not representative of the total soil carbon losses integrated over the entire soil depth, and thus cannot be compared with the model output.

Can we model observed soil carbon changes from a dense inventory? A case study over england and wales using three version of orchidee ecosystem model (AR5, AR5-PRIM and O-CN)

NASA Astrophysics Data System (ADS)

Guenet, B.; Moyano, F. E.; Vuichard, N.; Kirk, G. J. D.; Bellamy, P. H.; Zaehle, S.; Ciais, P.

2013-07-01

A widespread decrease of the top soil carbon content was observed over England and Wales during the period 1978-2003 in the National Soil Inventory (NSI), amounting to a carbon loss of 4.44 Tg yr-1 over 141 550 km2. Subsequent modelling studies have shown that changes in temperature and precipitation could only account for a small part of the observed decrease, and therefore that changes in land use and management and resulting changes in soil respiration or primary production were the main causes. So far, all the models used to reproduce the NSI data did not account for plant-soil interactions and were only soil carbon models with carbon inputs forced by data. Here, we use three different versions of a process-based coupled soil-vegetation model called ORCHIDEE, in order to separate the effect of trends in soil carbon input, and soil carbon mineralisation induced by climate trends over 1978-2003. The first version of the model (ORCHIDEE-AR5) used for IPCC-AR5 CMIP5 Earth System simulations, is based on three soil carbon pools defined with first order decomposition kinetics, as in the CENTURY model. The second version (ORCHIDEE-AR5-PRIM) built for this study includes a relationship between litter carbon and decomposition rates, to reproduce a priming effect on decomposition. The last version (O-CN) takes into account N-related processes. Soil carbon decomposition in O-CN is based on CENTURY, but adds N limitations on litter decomposition. We performed regional gridded simulations with these three versions of the ORCHIDEE model over England and Wales. None of the three model versions was able to reproduce the observed NSI soil carbon trend. This suggests that either climate change is not the main driver for observed soil carbon losses, or that the ORCHIDEE model even with priming or N-effects on decomposition lacks the basic mechanisms to explain soil carbon change in response to climate, which would raise a caution flag about the ability of this type of model to project soil carbon changes in response to future warming. A third possible explanation could be that the NSI measurements made on the topsoil are not representative of the total soil carbon losses integrated over the entire soil depth, and thus cannot be compared with the model output.

Overview and Evaluation of the Community Multiscale Air ...

EPA Pesticide Factsheets

The Community Multiscale Air Quality (CMAQ) model is a state-of-the-science air quality model that simulates the emission, transport and fate of numerous air pollutants, including ozone and particulate matter. The Computational Exposure Division (CED) of the U.S. Environmental Protection Agency develops the CMAQ model and periodically releases new versions of the model that include bug fixes and various other improvements to the modeling system. In late 2016 or early 2017, CMAQ version 5.2 will be released. This new version of CMAQ will contain important updates from the current CMAQv5.1 modeling system, along with several instrumented versions of the model (e.g. decoupled direct method and sulfur tracking). Some specific model updates include the implementation of a new wind-blown dust treatment in CMAQv5.2, a significant improvement over the treatment in v5.1 which can severely overestimate wind-blown dust under certain conditions. Several other major updates to the modeling system include an update to the calculation of aerosols; implementation of full halogen chemistry (CMAQv5.1 contains a partial implementation of halogen chemistry); the new carbon bond 6 (CB6) chemical mechanism; updates to cloud model in CMAQ; and a new lightning assimilation scheme for the WRF model which significant improves the placement and timing of convective precipitation in the WRF precipitation fields. Numerous other updates to the modeling system will also be available in v5.2.

GWM-VI: groundwater management with parallel processing for multiple MODFLOW versions

USGS Publications Warehouse

Banta, Edward R.; Ahlfeld, David P.

2013-01-01

Groundwater Management–Version Independent (GWM–VI) is a new version of the Groundwater Management Process of MODFLOW. The Groundwater Management Process couples groundwater-flow simulation with a capability to optimize stresses on the simulated aquifer based on an objective function and constraints imposed on stresses and aquifer state. GWM–VI extends prior versions of Groundwater Management in two significant ways—(1) it can be used with any version of MODFLOW that meets certain requirements on input and output, and (2) it is structured to allow parallel processing of the repeated runs of the MODFLOW model that are required to solve the optimization problem. GWM–VI uses the same input structure for files that describe the management problem as that used by prior versions of Groundwater Management. GWM–VI requires only minor changes to the input files used by the MODFLOW model. GWM–VI uses the Joint Universal Parameter IdenTification and Evaluation of Reliability Application Programming Interface (JUPITER-API) to implement both version independence and parallel processing. GWM–VI communicates with the MODFLOW model by manipulating certain input files and interpreting results from the MODFLOW listing file and binary output files. Nearly all capabilities of prior versions of Groundwater Management are available in GWM–VI. GWM–VI has been tested with MODFLOW-2005, MODFLOW-NWT (a Newton formulation for MODFLOW-2005), MF2005-FMP2 (the Farm Process for MODFLOW-2005), SEAWAT, and CFP (Conduit Flow Process for MODFLOW-2005). This report provides sample problems that demonstrate a range of applications of GWM–VI and the directory structure and input information required to use the parallel-processing capability.

A revised Thai Multi-Dimensional Scale of Perceived Social Support.

PubMed

Wongpakaran, Nahathai; Wongpakaran, Tinakon

2012-11-01

In order to ensure the construct validity of the three-factor model of the Multi-dimensional Scale of Perceived Social Support (MSPSS), and based on the assumption that it helps users differentiate between sources of social support, in this study a revised version was created and tested. The aim was to compare the level of model fit of the original version of the MSPSS against the revised version--which contains a minor change from the original. The study was conducted on 486 medical students who completed the original and revised versions of the MSPSS, as well as the Rosenberg Self-Esteem Scale (Rosenberg, 1965) and Beck Depression Inventory II (Beck, Steer, & Brown, 1996). Confirmatory factor analysis was performed to compare the results, showing that the revised version of MSPSS demonstrated a good internal consistency--with a Cronbach's alpha of .92 for the MSPSS questionnaire, and a significant correlation with the other scales, as predicted. The revised version provided better internal consistency, increasing the Cronbach's alpha for the Significant Others sub-scale from 0.86 to 0.92. Confirmatory factor analysis revealed an acceptable model fit: chi2 128.11, df 51, p < .001; TLI 0.94; CFI 0.95; GFI 0.90; PNFI 0.71; AGFI 0.85; RMSEA 0.093 (0.073-0.113) and SRMR 0.042, which is better than the original version. The tendency of the new version was to display a better level of fit with a larger sample size. The limitations of the study are discussed, as well as recommendations for further study.

Data Assimilation Experiments using Quality Controlled AIRS Version 5 Temperature Soundings

NASA Technical Reports Server (NTRS)

SUsskind, Joel

2008-01-01

The AIRS Science Team Version 5 retrieval algorithm has been finalized and is now operational at the Goddard DAAC in the processing (and reprocessing) of all AIRS data. The AIRS Science Team Version 5 retrieval algorithm contains two significant improvements over Version 4: 1) Improved physics allows for use of AIRS observations in the entire 4.3 pm C02 absorption band in the retrieval of temperature profile T(p) during both day and night. Tropospheric sounding 15 pm C02 observations are now used primarily in the generation of cloud cleared radiances Ri. This approach allows for the generation of accurate values of Ri and T(p) under most cloud conditions. 2) Another very significant improvement in Version 5 is the ability to generate accurate case-by-case, level-by-level error estimates for the atmospheric temperature profile, as well as for channel-by- channel error estimates for Ri. These error estimates are used for quality control of the retrieved products. We have conducted forecast impact experiments assimilating AIRS temperature profiles with different levels of quality control using the NASA GEOS-5 data assimilation system. Assimilation of quality controlled T(p) resulted in significantly improved forecast skill compared to that obtained from analyses obtained when all data used operationally by NCEP, except for AIRS data, is assimilated. We also conducted an experiment assimilating AIRS radiances uncontaminated by clouds, as done Operationally by ECMWF and NCEP. Forecasts resulting from assimilated AIRS radiances were of poorer quality than those obtained assimilating AIRS temperatures.

Modeling the structure of the attitudes and belief scale 2 using CFA and bifactor approaches: Toward the development of an abbreviated version.

PubMed

Hyland, Philip; Shevlin, Mark; Adamson, Gary; Boduszek, Daniel

2014-01-01

The Attitudes and Belief Scale-2 (ABS-2: DiGiuseppe, Leaf, Exner, & Robin, 1988. The development of a measure of rational/irrational thinking. Paper presented at the World Congress of Behavior Therapy, Edinburg, Scotland.) is a 72-item self-report measure of evaluative rational and irrational beliefs widely used in Rational Emotive Behavior Therapy research contexts. However, little psychometric evidence exists regarding the measure's underlying factor structure. Furthermore, given the length of the ABS-2 there is a need for an abbreviated version that can be administered when there are time demands on the researcher, such as in clinical settings. This study sought to examine a series of theoretical models hypothesized to represent the latent structure of the ABS-2 within an alternative models framework using traditional confirmatory factor analysis as well as utilizing a bifactor modeling approach. Furthermore, this study also sought to develop a psychometrically sound abbreviated version of the ABS-2. Three hundred and thirteen (N = 313) active emergency service personnel completed the ABS-2. Results indicated that for each model, the application of bifactor modeling procedures improved model fit statistics, and a novel eight-factor intercorrelated solution was identified as the best fitting model of the ABS-2. However, the observed fit indices failed to satisfy commonly accepted standards. A 24-item abbreviated version was thus constructed and an intercorrelated eight-factor solution yielded satisfactory model fit statistics. Current results support the use of a bifactor modeling approach to determining the factor structure of the ABS-2. Furthermore, results provide empirical support for the psychometric properties of the newly developed abbreviated version.

Characteristics of the ocean simulations in the Max Planck Institute Ocean Model (MPIOM) the ocean component of the MPI-Earth system model

NASA Astrophysics Data System (ADS)

Jungclaus, J. H.; Fischer, N.; Haak, H.; Lohmann, K.; Marotzke, J.; Matei, D.; Mikolajewicz, U.; Notz, D.; von Storch, J. S.

2013-06-01

MPI-ESM is a new version of the global Earth system model developed at the Max Planck Institute for Meteorology. This paper describes the ocean state and circulation as well as basic aspects of variability in simulations contributing to the fifth phase of the Coupled Model Intercomparison Project (CMIP5). The performance of the ocean/sea-ice model MPIOM, coupled to a new version of the atmosphere model ECHAM6 and modules for land surface and ocean biogeochemistry, is assessed for two model versions with different grid resolution in the ocean. The low-resolution configuration has a nominal resolution of 1.5°, whereas the higher resolution version features a quasiuniform, eddy-permitting global resolution of 0.4°. The paper focuses on important oceanic features, such as surface temperature and salinity, water mass distribution, large-scale circulation, and heat and freshwater transports. In general, these integral quantities are simulated well in comparison with observational estimates, and improvements in comparison with the predecessor system are documented; for example, for tropical variability and sea ice representation. Introducing an eddy-permitting grid configuration in the ocean leads to improvements, in particular, in the representation of interior water mass properties in the Atlantic and in the representation of important ocean currents, such as the Agulhas and Equatorial current systems. In general, however, there are more similarities than differences between the two grid configurations, and several shortcomings, known from earlier versions of the coupled model, prevail.

ECONOMIC GROWTH ANALYSIS SYSTEM: USER'S GUIDE VERSION 2.0

EPA Science Inventory

The two-volume report describes the development of and provides information needed to operate, the Economic Growth Analysis System (E-GAS) Version 2.0 model. The model will be used to project emissions inventories of volatile organic compounds (VOCs), oxides of nitrogen (NOx), a...

ECONOMIC GROWTH ANALYSIS SYSTEM: REFERENCE MANUAL VERSION 2.0

EPA Science Inventory

The two-volume report describes the development of and provides information needed to operate, the Economic Growth Analysis System (E-GAS) Version 2.0 model. The model will be used to project emissions inventories of volatile organic compounds (VOCs), oxides of nitrogen (NOx), a...

ECONOMIC GROWTH ANALYSIS SYSTEM: USER'S GUIDE - VERSION 3.0

EPA Science Inventory

The two-volume report describes the development of, and provides information needed to operate, the Economic Growth Analysis System (E-GAS) Version 3.0 model. The model will be used to project emissions inventories of volatile organic compounds, oxides of nitrogen, and carbon mon...

ECONOMIC GROWTH ANALYSIS SYSTEM: REFERENCE MANUAL VERSION 3.0

EPA Science Inventory

The two-volume report describes the development of, and provides information needed to operate, the Economic Growth Analysis System (E-GAS) Version 3.0 model. The model will be used to project emissions inventories of volatile organic compounds, oxides of nitrogen, and carbon mon...

Tier I Rice Model - Version 1.0 - Guidance for Estimating Pesticide Concentrations in Rice Paddies

EPA Pesticide Factsheets

Describes a Tier I Rice Model (Version 1.0) for estimating surface water exposure from the use of pesticides in rice paddies. The concentration calculated can be used for aquatic ecological risk and drinking water exposure assessments.

Flight evaluations of several hover control and display combinations for precise blind vertical landings

NASA Technical Reports Server (NTRS)

Schroeder, J. A.; Merrick, V. K.

1990-01-01

Several control and display concepts were evaluated on a variable-stability helicopter prior to future evaluations on a modified Harrier. The control and display concepts had been developed to enable precise hover maneuvers, station keeping, and vertical landings in simulated zero-visibility conditions and had been evaluated extensively in previous piloted simulations. Flight evaluations early in the program revealed several inadequacies in the display drive laws that were later corrected using an alternative design approach that integrated the control and display characteristics with the desired guidance law. While hooded, three pilots performed landing-pad captures followed by vertical landings with attitude-rate, attitude, and translation-velocity-command control systems. The latter control system incorporated a modified version of state-rate-feedback implicit-model following. Precise landing within 2 ft of the desired touchdown point were achieved.

Simulation Control Graphical User Interface Logging Report

NASA Technical Reports Server (NTRS)

Hewling, Karl B., Jr.

2012-01-01

One of the many tasks of my project was to revise the code of the Simulation Control Graphical User Interface (SIM GUI) to enable logging functionality to a file. I was also tasked with developing a script that directed the startup and initialization flow of the various LCS software components. This makes sure that a software component will not spin up until all the appropriate dependencies have been configured properly. Also I was able to assist hardware modelers in verifying the configuration of models after they have been upgraded to a new software version. I developed some code that analyzes the MDL files to determine if any error were generated due to the upgrade process. Another one of the projects assigned to me was supporting the End-to-End Hardware/Software Daily Tag-up meeting.

Identification and real-time position control of a servo-hydraulic rotary actuator by means of a neurobiologically motivated algorithm.

PubMed

Sadeghieh, Ali; Sazgar, Hadi; Goodarzi, Kamyar; Lucas, Caro

2012-01-01

This paper presents a new intelligent approach for adaptive control of a nonlinear dynamic system. A modified version of the brain emotional learning based intelligent controller (BELBIC), a bio-inspired algorithm based upon a computational model of emotional learning which occurs in the amygdala, is utilized for position controlling a real laboratorial rotary electro-hydraulic servo (EHS) system. EHS systems are known to be nonlinear and non-smooth due to many factors such as leakage, friction, hysteresis, null shift, saturation, dead zone, and especially fluid flow expression through the servo valve. The large value of these factors can easily influence the control performance in the presence of a poor design. In this paper, a mathematical model of the EHS system is derived, and then the parameters of the model are identified using the recursive least squares method. In the next step, a BELBIC is designed based on this dynamic model and utilized to control the real laboratorial EHS system. To prove the effectiveness of the modified BELBIC's online learning ability in reducing the overall tracking error, results have been compared to those obtained from an optimal PID controller, an auto-tuned fuzzy PI controller (ATFPIC), and a neural network predictive controller (NNPC) under similar circumstances. The results demonstrate not only excellent improvement in control action, but also less energy consumption. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

Optimal control of information epidemics modeled as Maki Thompson rumors

NASA Astrophysics Data System (ADS)

Kandhway, Kundan; Kuri, Joy

2014-12-01

We model the spread of information in a homogeneously mixed population using the Maki Thompson rumor model. We formulate an optimal control problem, from the perspective of single campaigner, to maximize the spread of information when the campaign budget is fixed. Control signals, such as advertising in the mass media, attempt to convert ignorants and stiflers into spreaders. We show the existence of a solution to the optimal control problem when the campaigning incurs non-linear costs under the isoperimetric budget constraint. The solution employs Pontryagin's Minimum Principle and a modified version of forward backward sweep technique for numerical computation to accommodate the isoperimetric budget constraint. The techniques developed in this paper are general and can be applied to similar optimal control problems in other areas. We have allowed the spreading rate of the information epidemic to vary over the campaign duration to model practical situations when the interest level of the population in the subject of the campaign changes with time. The shape of the optimal control signal is studied for different model parameters and spreading rate profiles. We have also studied the variation of the optimal campaigning costs with respect to various model parameters. Results indicate that, for some model parameters, significant improvements can be achieved by the optimal strategy compared to the static control strategy. The static strategy respects the same budget constraint as the optimal strategy and has a constant value throughout the campaign horizon. This work finds application in election and social awareness campaigns, product advertising, movie promotion and crowdfunding campaigns.

Model Predictive Control of the Current Profile and the Internal Energy of DIII-D Plasmas

NASA Astrophysics Data System (ADS)

Lauret, M.; Wehner, W.; Schuster, E.

2015-11-01

For efficient and stable operation of tokamak plasmas it is important that the current density profile and the internal energy are jointly controlled by using the available heating and current-drive (H&CD) sources. The proposed approach is a version of nonlinear model predictive control in which the input set is restricted in size by the possible combinations of the H&CD on/off states. The controller uses real-time predictions over a receding-time horizon of both the current density profile (nonlinear partial differential equation) and the internal energy (nonlinear ordinary differential equation) evolutions. At every time instant the effect of every possible combination of H&CD sources on the current profile and internal energy is evaluated over the chosen time horizon. The combination that leads to the best result, which is assessed by a user-defined cost function, is then applied up until the next time instant. Simulations results based on a control-oriented transport code illustrate the effectiveness of the proposed control method. Supported by the US DOE under DE-FC02-04ER54698 & DE-SC0010661.

A world ocean model for greenhouse sensitivity studies: resolution intercomparison and the role of diagnostic forcing

NASA Astrophysics Data System (ADS)

Washington, Warren M.; Meehl, Gerald A.; Verplank, Lynda; Bettge, Thomas W.

1994-05-01

We have developed an improved version of a world ocean model with the intention of coupling to an atmospheric model. This article documents the simulation capability of this 1° global ocean model, shows improvements over our earlier 5° version, and compares it to features simulated with a 0.5° model. These experiments use a model spin-up methodology whereby the ocean model can subsequently be coupled to an atmospheric model and used for order 100-year coupled model integrations. With present-day computers, 1° is a reasonable compromise in resolution that allows for century-long coupled experiments. The 1° ocean model is derived from a 0.5°-resolution model developed by A. Semtner (Naval Postgraduate School) and R. Chervin (National Center for Atmospheric Research) for studies of the global eddy-resolving world ocean circulation. The 0.5° bottom topography and continental outlines have been altered to be compatible with the 1° resolution, and the Arctic Ocean has been added. We describe the ocean simulation characteristics of the 1° version and compare the result of weakly constraining (three-year time scale) the three-dimensional temperature and salinity fields to the observations below the thermocline (710 m) with the model forced only at the top of the ocean by observed annual mean wind stress, temperature, and salinity. The 1° simulations indicate that major ocean circulation patterns are greatly improved compared to the 5° version and are qualitatively reproduced in comparison to the 0.5° version. Using the annual mean top forcing alone in a 100-year simulation with the 1° version preserves the general features of the major observed temperature and salinity structure with most climate drift occurring mainly beneath the thermocline in the first 50 75 years. Because the thermohaline circulation in the 1° version is relatively weak with annual mean forcing, we demonstrate the importance of the seasonal cycle by performing two sensitivity experiments. Results show a dramatic intensification of the meridional overturning circulation (order of magnitude) with perpetual winter surface temperature forcing in the North Atlantic and strong intensification (factor of three) with perpetual early winter temperatures in that region. These effects are felt throughout the Atlantic (particularly an intensified and northward-shifted Gulf Stream outflow). In the Pacific, the temperature gradient strengthens in the thermocline, thus helping counter the systematic error of a thermocline that is too diffuse.

Absorption models for low-frequency variability in compact radio sources

NASA Technical Reports Server (NTRS)

Marscher, A. P.

1979-01-01

The consequences of the most plausible version of the absorption model for low-frequency variability in compact extragalactic radio sources are considered. The general restrictions placed on such a model are determined, and observational tests are suggested that can be used either to support the model or to discriminate among its various versions. It is shown that low-frequency variability in compact radio sources can be successfully explained by a class of models in which the flux is modulated by changes in free-free optical depth within an intervening ionized medium. Two versions of such a model are distinguished, one involving large changes in optical depth and the other, small changes. It is noted that while absorption effects are capable of causing rapid flux and structural variations at centimetric wavelengths, the models predict detailed behavior that is in direct conflict with observational data.

CMIP5 Historical Simulations (1850-2012) with GISS ModelE2

NASA Technical Reports Server (NTRS)

Miller, Ronald Lindsay; Schmidt, Gavin A.; Nazarenko, Larissa S.; Tausnev, Nick; Bauer, Susanne E.; DelGenio, Anthony D.; Kelley, Max; Lo, Ken K.; Ruedy, Reto; Shindell, Drew T.;

Omni Directional Multimaterial Soft Cylindrical Actuator and Its Application as a Steerable Catheter.

PubMed

Gul, Jahan Zeb; Yang, Young Jin; Su, Kim Young; Choi, Kyung Hyun

2017-09-01

Soft actuators with complex range of motion lead to strong interest in applying devices like biomedical catheters and steerable soft pipe inspectors. To facilitate the use of soft actuators in devices where controlled, complex, precise, and fast motion is required, a structurally controlled Omni directional soft cylindrical actuator is fabricated in a modular way using multilayer composite of polylactic acid based conductive Graphene, shape memory polymer, shape memory alloy, and polyurethane. Multiple fabrication techniques are discussed step by step that mainly include fused deposition modeling based 3D printing, dip coating, and UV curing. A mathematical control model is used to generate patterned electrical signals for the Omni directional deformations. Characterizations like structural control, bending, recovery, path, and thermal effect are carried out with and without load (10 g) to verify the new cylindrical design concept. Finally, the application of Omni directional actuator as a steerable catheter is explored by fabricating a scaled version of carotid artery through 3D printing using a semitransparent material.

Versioning for CMIP6 in the Earth System Grid Federation

NASA Astrophysics Data System (ADS)

Weigel, Tobias; Kindermann, Stephan; Lautenschlager, Michael

2015-04-01

The Earth System Grid Federation (ESGF) has been used as the e-infrastructure to provide access to CMIP5 data and is expected to serve CMIP6 data as well. 2015 marks the year of continued planning and preparation where new concepts can still be implemented for the operational phase of CMIP6. A particular concern within ESGF operations is the versioning and automated replication of data. From CMIP5 experience we know that the pathway between initial submission of modelling data to the ESGF data space and quality-controlled long-term archival of the final products is long and far from linear. Data may be retracted, amended and updated, and metadata may accumulate at different stages. It is unrealistic to assume that a simple and straightforward process can be used as a role model to build ESGF services around the different stages data will pass through during the active phase of CMIP6. Nonetheless, at the technical level ESGF requires some form of automated control and management. At the same time, the accountability of data products must be made transparent to guard against misinterpretation, increase user experience and promote open and reproducible science. To address the challenges, first some essential versioning policies must be agreed upon and enforced through technical means and organizational processes. The volatile readiness state of CMIP data cannot be changed as it is given by the users; however its management can be improved. A promising approach is to embed persistent identifiers in all CMIP6 data objects and register them so they can be globally resolved by any user and used as reference points within ESGF management processes. A specific conceptual interpretation and management of such identifiers can ensure that they remain valid and useful even if the data objects change or become unavailable. For this, identifiers must be assigned to individual versions and aggregations, connected with each other and integrated in the existing ESGF publication process. This can also facilitate automatic replication procedures necessary in view of the expected CMIP6 data volumes. Identifier management will require stable RESTful APIs and associated tools for CMIP6 operations. The resulting framework can have benefits beyond core ESGF use cases including applications in other disciplinary infrastructures. Some initial prototyping has already been done and the newly formed ESGF working team on replication and versioning will follow a dedicated roadmap to prepare the e-infrastructure for the upcoming challenge.

Overreliance on auditory feedback may lead to sound/syllable repetitions: simulations of stuttering and fluency-inducing conditions with a neural model of speech production

PubMed Central

Civier, Oren; Tasko, Stephen M.; Guenther, Frank H.

2010-01-01

This paper investigates the hypothesis that stuttering may result in part from impaired readout of feedforward control of speech, which forces persons who stutter (PWS) to produce speech with a motor strategy that is weighted too much toward auditory feedback control. Over-reliance on feedback control leads to production errors which, if they grow large enough, can cause the motor system to “reset” and repeat the current syllable. This hypothesis is investigated using computer simulations of a “neurally impaired” version of the DIVA model, a neural network model of speech acquisition and production. The model’s outputs are compared to published acoustic data from PWS’ fluent speech, and to combined acoustic and articulatory movement data collected from the dysfluent speech of one PWS. The simulations mimic the errors observed in the PWS subject’s speech, as well as the repairs of these errors. Additional simulations were able to account for enhancements of fluency gained by slowed/prolonged speech and masking noise. Together these results support the hypothesis that many dysfluencies in stuttering are due to a bias away from feedforward control and toward feedback control. PMID:20831971

Reliability and Validity of the Computerized Revised Token Test: Comparison of Reading and Listening Versions in Persons with and without Aphasia

ERIC Educational Resources Information Center

McNeil, Malcolm R.; Pratt, Sheila R.; Szuminsky, Neil; Sung, Jee Eun; Fossett, Tepanta R. D.; Fassbinder, Wiltrud; Lim, Kyoung Yuel

2015-01-01

Purpose: This study assessed the reliability and validity of intermodality associations and differences in persons with aphasia (PWA) and healthy controls (HC) on a computerized listening and 3 reading versions of the Revised Token Test (RTT; McNeil & Prescott, 1978). Method: Thirty PWA and 30 HC completed the test versions, including a…

All-Ages Lead Model (Aalm) Version 1.05 (External Draft Report)

EPA Science Inventory

The All-Ages Lead Model (AALM) Version 1.05, is an external review draft software and guidance manual. EPA released this software and associated documentation for public review and comment beginning September 27, 2005, until October 27, 2005. The public comments will be accepte...

Prevalence of Invalid Computerized Baseline Neurocognitive Test Results in High School and Collegiate Athletes

PubMed Central

Schatz, Philip; Moser, Rosemarie Scolaro; Solomon, Gary S.; Ott, Summer D.; Karpf, Robin

2012-01-01

Context: Limited data are available regarding the prevalence and nature of invalid computerized baseline neurocognitive test data. Objective: To identify the prevalence of invalid baselines on the desktop and online versions of ImPACT and to document the utility of correcting for left-right (L-R) confusion on the desktop version of ImPACT. Design: Cross-sectional study of independent samples of high school (HS) and collegiate athletes who completed the desktop or online versions of ImPACT. Participants or Other Participants: A total of 3769 HS (desktop  =  1617, online  =  2152) and 2130 collegiate (desktop  =  742, online  =  1388) athletes completed preseason baseline assessments. Main Outcome Measure(s): Prevalence of 5 ImPACT validity indicators, with correction for L-R confusion (reversing left and right mouse-click responses) on the desktop version, by test version and group. Chi-square analyses were conducted for sex and attentional or learning disorders. Results: At least 1 invalid indicator was present on 11.9% (desktop) versus 6.3% (online) of the HS baselines and 10.2% (desktop) versus 4.1% (online) of collegiate baselines; correcting for L-R confusion (desktop) decreased this overall prevalence to 8.4% (HS) and 7.5% (collegiate). Online Impulse Control scores alone yielded 0.4% (HS) and 0.9% (collegiate) invalid baselines, compared with 9.0% (HS) and 5.4% (collegiate) on the desktop version; correcting for L-R confusion (desktop) decreased the prevalence of invalid Impulse Control scores to 5.4% (HS) and 2.6% (collegiate). Male athletes and HS athletes with attention deficit or learning disorders who took the online version were more likely to have at least 1 invalid indicator. Utility of additional invalidity indicators is reported. Conclusions: The online ImPACT version appeared to yield fewer invalid baseline results than did the desktop version. Identification of L-R confusion reduces the prevalence of invalid baselines (desktop only) and the potency of Impulse Control as a validity indicator. We advise test administrators to be vigilant in identifying invalid baseline results as part of routine concussion management and prevention programs. PMID:22892410

Argonne's Michael Wang talks about the GREET Model for reducing vehicle emi

DOE Office of Scientific and Technical Information (OSTI.GOV)

Wang, Michael

2012-07-25

To fully evaluate energy and emission impacts of advanced vehicle technologies and new transportation fuels, the fuel cycle from wells to wheels and the vehicle cycle through material recovery and vehicle disposal need to be considered. Sponsored by the U.S. Department of Energy's Office of Energy Efficiency and Renewable Energy (EERE), Argonne has developed a full life-cycle model called GREET (Greenhouse gases, Regulated Emissions, and Energy use in Transportation). It allows researchers and analysts to evaluate various vehicle and fuel combinations on a full fuel-cycle/vehicle-cycle basis. The first version of GREET was released in 1996. Since then, Argonne has continuedmore » to update and expand the model. The most recent GREET versions are the GREET 1 2012 version for fuel-cycle analysis and GREET 2.7 version for vehicle-cycle analysis.« less

Prediction and control of neural responses to pulsatile electrical stimulation

NASA Astrophysics Data System (ADS)

Campbell, Luke J.; Sly, David James; O'Leary, Stephen John

2012-04-01

This paper aims to predict and control the probability of firing of a neuron in response to pulsatile electrical stimulation of the type delivered by neural prostheses such as the cochlear implant, bionic eye or in deep brain stimulation. Using the cochlear implant as a model, we developed an efficient computational model that predicts the responses of auditory nerve fibers to electrical stimulation and evaluated the model's accuracy by comparing the model output with pooled responses from a group of guinea pig auditory nerve fibers. It was found that the model accurately predicted the changes in neural firing probability over time to constant and variable amplitude electrical pulse trains, including speech-derived signals, delivered at rates up to 889 pulses s-1. A simplified version of the model that did not incorporate adaptation was used to adaptively predict, within its limitations, the pulsatile electrical stimulus required to cause a desired response from neurons up to 250 pulses s-1. Future stimulation strategies for cochlear implants and other neural prostheses may be enhanced using similar models that account for the way that neural responses are altered by previous stimulation.

Results of the Simulation of the HTR-Proteus Core 4.2 Using PEBBED-COMBINE: FY10 Report

DOE Office of Scientific and Technical Information (OSTI.GOV)

Hans Gougar

2010-07-01

ABSTRACT The Idaho National Laboratory’s deterministic neutronics analysis codes and methods were applied to the computation of the core multiplication factor of the HTR-Proteus pebble bed reactor critical facility. This report is a follow-on to INL/EXT-09-16620 in which the same calculation was performed but using earlier versions of the codes and less developed methods. In that report, results indicated that the cross sections generated using COMBINE-7.0 did not yield satisfactory estimates of keff. It was concluded in the report that the modeling of control rods was not satisfactory. In the past year, improvements to the homogenization capability in COMBINE havemore » enabled the explicit modeling of TRIS particles, pebbles, and heterogeneous core zones including control rod regions using a new multi-scale version of COMBINE in which the 1-dimensional discrete ordinate transport code ANISN has been integrated. The new COMBINE is shown to yield benchmark quality results for pebble unit cell models, the first step in preparing few-group diffusion parameters for core simulations. In this report, the full critical core is modeled once again but with cross sections generated using the capabilities and physics of the improved COMBINE code. The new PEBBED-COMBINE model enables the exact modeling of the pebbles and control rod region along with better approximation to structures in the reflector. Initial results for the core multiplication factor indicate significant improvement in the INL’s tools for modeling the neutronic properties of a pebble bed reactor. Errors on the order of 1.6-2.5% in keff are obtained; a significant improvement over the 5-6% error observed in the earlier This is acceptable for a code system and model in the early stages of development but still too high for a production code. Analysis of a simpler core model indicates an over-prediction of the flux in the low end of the thermal spectrum. Causes of this discrepancy are under investigation. New homogenization techniques and assumptions were used in this analysis and as such, they require further confirmation and validation. Further refinement and review of the complex Proteus core model are likely to reduce the errors even further.« less

Ada (trade name) Compiler Validation Summary Report: Rational Environment, Version A.2.0.6 for Rational R1000.

DTIC Science & Technology

1985-05-24

RD-Ali57 830 ADA (TRADE NAME) COMPILER VALIDATION SUMMARY REPORT: 1/ RATIONAL ENVIRONMENT VERSION R296 FOR RATIONAL Ri888 (U) SOFTECH INC FAIRBORN OH...USoCPY WSSOS.UTM iTS GWAT % : 4 AVF Control Number: AVF-VSR-09.0585 0 IAda Compiler Validation Summary Report: Rational Environment Version A.2.0.6 For...1985 to May 1986 Environment Version A.2-0.6 For Rational RlOOO (Final) ______________ S. PLNOPftaiJSw mO. ftLOW@N WuCU ). aulwtar111. CONiTRACT 00

Updates to the Demographic and Spatial Allocation Models to Produce Integrated Climate and Land Use Scenarios (ICLUS) (Version 2) (External Review Draft)

EPA Science Inventory

EPA announced the availability of the draft report, Updates to the Demographic and Spatial Allocation Models to Produce Integrated Climate and Land Use Scenarios (ICLUS) for a 30-day public comment period. The ICLUS version 2 (v2) modeling tool furthered land change mod...